From f0ed67ec607f6c4e99aa5bb0bd5ac184bcaa5908 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 12 Oct 2012 17:40:41 +0530 Subject: ath6kl: Fix a mismatch in power management debug message Power Save Enabled : REC_POWER - conserve power without sacrificing performance. Power Save Disabled : MAX_PERF_POWER - maximum performance at the expense of power. Hence fix the debug message. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 41dea0d..459d700 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1452,10 +1452,10 @@ static int ath6kl_cfg80211_set_power_mgmt(struct wiphy *wiphy, return -EIO; if (pmgmt) { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: max perf\n", __func__); + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: rec power\n", __func__); mode.pwr_mode = REC_POWER; } else { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: rec power\n", __func__); + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: max perf\n", __func__); mode.pwr_mode = MAX_PERF_POWER; } -- cgit v0.10.2 From f5750c657a94bcc17cd2129368ff00085d475996 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 3 Nov 2012 21:30:25 +0100 Subject: drivers/net/wireless/ath/ath6kl/hif.c: drop if around WARN_ON Just use WARN_ON rather than an if containing only WARN_ON(1). A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; @@ - if (e) WARN_ON(1); + WARN_ON(e); // Signed-off-by: Julia Lawall Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/hif.c b/drivers/net/wireless/ath/ath6kl/hif.c index a7a1ec4..a6b6144 100644 --- a/drivers/net/wireless/ath/ath6kl/hif.c +++ b/drivers/net/wireless/ath/ath6kl/hif.c @@ -339,8 +339,7 @@ static int ath6kl_hif_proc_err_intr(struct ath6kl_device *dev) status = hif_read_write_sync(dev->ar, ERROR_INT_STATUS_ADDRESS, reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); - if (status) - WARN_ON(1); + WARN_ON(status); return status; } @@ -384,8 +383,7 @@ static int ath6kl_hif_proc_cpu_intr(struct ath6kl_device *dev) status = hif_read_write_sync(dev->ar, CPU_INT_STATUS_ADDRESS, reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); - if (status) - WARN_ON(1); + WARN_ON(status); return status; } -- cgit v0.10.2 From 4fb4e0bee12d66a175e13ed5d956e61398c34e4e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 21 Oct 2012 12:52:04 +0200 Subject: drivers/net/wireless/ti/wlcore/main.c: eliminate possible double power off The function wl12xx_set_power_on is only called twice, once in wl12xx_chip_wakeup and once in wl12xx_get_hw_info. On the failure of the call in wl12xx_chip_wakeup, the containing function just returns, but on the failure of the call in wl12xx_get_hw_info, the containing function calls wl1271_power_off. This does not seem necessary, because if wl12xx_set_power_on has set the power on and then fails, it has already turned the power off. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier f,free,a; parameter list[n] ps; type T; expression e; @@ f(ps,T a,...) { ... when any when != a = e if(...) { ... free(a); ... return ...; } ... when any } @@ identifier r.f,r.free; expression x,a; expression list[r.n] xs; @@ * x = f(xs,a,...); if (...) { ... free(a); ... return ...; } // Signed-off-by: Julia Lawall Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 25530c8..0eb739b 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5116,7 +5116,7 @@ static int wl12xx_get_hw_info(struct wl1271 *wl) ret = wl12xx_set_power_on(wl); if (ret < 0) - goto out; + return ret; ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &wl->chip.id); if (ret < 0) -- cgit v0.10.2 From ca6dc10343ba6811dc2e1b31dafd54bb5fff6437 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 23 Oct 2012 13:22:48 +0800 Subject: wlcore: spi: use platform_device_unregister in wl1271_remove() platform_device_unregister() only calls platform_device_del() and platform_device_put(), thus use platform_device_unregister() to simplify the code. Also the documents in platform.c shows that platform_device_del and platform_device_put must _only_ be externally called in error cases. All other usage is a bug. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index a519bc3..76838a4 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -407,8 +407,7 @@ static int __devexit wl1271_remove(struct spi_device *spi) { struct wl12xx_spi_glue *glue = spi_get_drvdata(spi); - platform_device_del(glue->core); - platform_device_put(glue->core); + platform_device_unregister(glue->core); kfree(glue); return 0; -- cgit v0.10.2 From 200e932649dc11e4d69545a6b513d012a6492d0d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 23 Oct 2012 13:23:13 +0800 Subject: wlcore: sdio: use platform_device_unregister in wl1271_remove() platform_device_unregister() only calls platform_device_del() and platform_device_put(), thus use platform_device_unregister() to simplify the code. Also the documents in platform.c shows that platform_device_del and platform_device_put must _only_ be externally called in error cases. All other usage is a bug. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 73ace4b..4960bcd 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -326,8 +326,7 @@ static void __devexit wl1271_remove(struct sdio_func *func) /* Undo decrement done above in wl1271_probe */ pm_runtime_get_noresume(&func->dev); - platform_device_del(glue->core); - platform_device_put(glue->core); + platform_device_unregister(glue->core); kfree(glue); } -- cgit v0.10.2 From 99c227e3d9270840884ded780787693fd0b82dde Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 23 Oct 2012 13:03:01 -0700 Subject: drivers/net/wireless/ti/wl1251: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Luciano Coelho CC: "John W. Linville" Signed-off-by: Kees Cook Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig index 1fb6584..8fec4ed 100644 --- a/drivers/net/wireless/ti/wl1251/Kconfig +++ b/drivers/net/wireless/ti/wl1251/Kconfig @@ -1,6 +1,6 @@ menuconfig WL1251 tristate "TI wl1251 driver support" - depends on MAC80211 && EXPERIMENTAL && GENERIC_HARDIRQS + depends on MAC80211 && GENERIC_HARDIRQS select FW_LOADER select CRC7 ---help--- -- cgit v0.10.2 From 4eeac22c159f053ea34527e4fea359ab10b4b5a5 Mon Sep 17 00:00:00 2001 From: "Janusz.Dziedzic@tieto.com" Date: Wed, 7 Nov 2012 15:42:19 +0200 Subject: wlcore: SPI - fix spi transfer_list In corner case for wl12xx_spi_raw_write() when len == SPI_AGGR_BUFFER_SIZE we don't setup correctly spi transfer_list. Next we will have garbage and strange errors reported by SPI framework (eg. wrong speed_hz, failed to transfer one message from queue) when iterate transfer_list. Signed-off-by: Janusz Dziedzic Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 76838a4..9d18f2f 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -270,7 +270,7 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, void *buf, size_t len, bool fixed) { struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); - struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS]; + struct spi_transfer t[2 * (WSPI_MAX_NUM_OF_CHUNKS + 1)]; struct spi_message m; u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; u32 *cmd; -- cgit v0.10.2 From 25b08bf662dea1291a9872547819f0e96bf68fe6 Mon Sep 17 00:00:00 2001 From: Chuansheng Liu Date: Wed, 7 Nov 2012 01:28:14 +0800 Subject: wlcore: Fix the usage of wait_for_completion_timeout The return value of wait_for_completion_timeout() is always >= 0 with unsigned int type. So the condition "ret < 0" or "ret >= 0" is pointless. Signed-off-by: liu chuansheng Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c index 4d1414a..ffcd843 100644 --- a/drivers/net/wireless/ti/wlcore/ps.c +++ b/drivers/net/wireless/ti/wlcore/ps.c @@ -151,9 +151,6 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl) wl12xx_queue_recovery_work(wl); ret = -ETIMEDOUT; goto err; - } else if (ret < 0) { - wl1271_error("ELP wakeup completion error."); - goto err; } } -- cgit v0.10.2 From 8f1fd6cb6a036bf2e600f8a3e397681a5e33ab07 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Fri, 16 Nov 2012 12:20:46 +0530 Subject: wlcore: Remove redundant check on unsigned variable No need to check whether unsigned variable is less than 0. CC: Luciano Coelho CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: Tushar Behera Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c index c86bb00..93f801d 100644 --- a/drivers/net/wireless/ti/wlcore/debugfs.c +++ b/drivers/net/wireless/ti/wlcore/debugfs.c @@ -993,7 +993,7 @@ static ssize_t sleep_auth_write(struct file *file, return -EINVAL; } - if (value < 0 || value > WL1271_PSM_MAX) { + if (value > WL1271_PSM_MAX) { wl1271_warning("sleep_auth must be between 0 and %d", WL1271_PSM_MAX); return -ERANGE; -- cgit v0.10.2 From 3230f35e09f386ee604f55450dcd26098a3c4bc3 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:01 +0200 Subject: wlcore: start sta role on CHANGED_BSSID Make the connection flow simpler by starting sta role on bssid change. Currently, we start dev role when going idle-off, and start the sta role only after association indication. This complicates the connection flow with some possible intermediate states. Make it simpler by starting sta role on bssid change, which now happens *before* auth req get sent. Update the handling of mac80211's notifications and change wl1271_join/unjoin accordingly - * Split wl1271_join() into wlcore_join (tuning on a channel/bssid) and wlcore_set_assoc (configure sta after association). * Rename wl1271_unjoin() to wlcore_unset_assoc(), as it is no longer the inversion of wl1271_join() (now it's only used to disconnect associated sta / joined ibss, without stopping the role). * Set ssid before starting station role (needed for start_role(sta) While on it, split wl1271_bss_info_changed_sta() into some sub-functions. since we no longer use dev role in the connection flow, we now always use the hlid of the sta role. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 0eb739b..63367c0 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2468,8 +2468,7 @@ static int wl12xx_op_change_interface(struct ieee80211_hw *hw, return ret; } -static int wl1271_join(struct wl1271 *wl, struct wl12xx_vif *wlvif, - bool set_assoc) +static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif) { int ret; bool is_ibss = (wlvif->bss_type == BSS_TYPE_IBSS); @@ -2489,18 +2488,96 @@ static int wl1271_join(struct wl1271 *wl, struct wl12xx_vif *wlvif, /* clear encryption type */ wlvif->encryption_type = KEY_NONE; - if (set_assoc) - set_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags); - if (is_ibss) ret = wl12xx_cmd_role_start_ibss(wl, wlvif); else ret = wl12xx_cmd_role_start_sta(wl, wlvif); + + return ret; +} + +static int wl1271_ssid_set(struct wl12xx_vif *wlvif, struct sk_buff *skb, + int offset) +{ + u8 ssid_len; + const u8 *ptr = cfg80211_find_ie(WLAN_EID_SSID, skb->data + offset, + skb->len - offset); + + if (!ptr) { + wl1271_error("No SSID in IEs!"); + return -ENOENT; + } + + ssid_len = ptr[1]; + if (ssid_len > IEEE80211_MAX_SSID_LEN) { + wl1271_error("SSID is too long!"); + return -EINVAL; + } + + wlvif->ssid_len = ssid_len; + memcpy(wlvif->ssid, ptr+2, ssid_len); + return 0; +} + +static int wlcore_set_ssid(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct sk_buff *skb; + int ieoffset; + + /* we currently only support setting the ssid from the ap probe req */ + if (wlvif->bss_type != BSS_TYPE_STA_BSS) + return -EINVAL; + + skb = ieee80211_ap_probereq_get(wl->hw, vif); + if (!skb) + return -EINVAL; + + ieoffset = offsetof(struct ieee80211_mgmt, + u.probe_req.variable); + wl1271_ssid_set(wlvif, skb, ieoffset); + dev_kfree_skb(skb); + + return 0; +} + +static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_bss_conf *bss_conf) +{ + int ieoffset; + int ret; + + wlvif->aid = bss_conf->aid; + wlvif->channel_type = bss_conf->channel_type; + wlvif->beacon_int = bss_conf->beacon_int; + + set_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags); + + /* + * with wl1271, we don't need to update the + * beacon_int and dtim_period, because the firmware + * updates it by itself when the first beacon is + * received after a join. + */ + ret = wl1271_cmd_build_ps_poll(wl, wlvif, wlvif->aid); if (ret < 0) - goto out; + return ret; - if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) - goto out; + /* + * Get a template for hardware connection maintenance + */ + dev_kfree_skb(wlvif->probereq); + wlvif->probereq = wl1271_cmd_build_ap_probe_req(wl, + wlvif, + NULL); + ieoffset = offsetof(struct ieee80211_mgmt, + u.probe_req.variable); + wl1271_ssid_set(wlvif, wlvif->probereq, ieoffset); + + /* enable the connection monitoring feature */ + ret = wl1271_acx_conn_monit_params(wl, wlvif, true); + if (ret < 0) + return ret; /* * The join command disable the keep-alive mode, shut down its process, @@ -2510,29 +2587,58 @@ static int wl1271_join(struct wl1271 *wl, struct wl12xx_vif *wlvif, */ ret = wl1271_acx_keep_alive_mode(wl, wlvif, true); if (ret < 0) - goto out; + return ret; ret = wl1271_acx_aid(wl, wlvif, wlvif->aid); if (ret < 0) - goto out; + return ret; ret = wl12xx_cmd_build_klv_null_data(wl, wlvif); if (ret < 0) - goto out; + return ret; ret = wl1271_acx_keep_alive_config(wl, wlvif, wlvif->sta.klv_template_id, ACX_KEEP_ALIVE_TPL_VALID); if (ret < 0) - goto out; + return ret; -out: return ret; } -static int wl1271_unjoin(struct wl1271 *wl, struct wl12xx_vif *wlvif) +static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif) { int ret; + bool sta = wlvif->bss_type == BSS_TYPE_STA_BSS; + + /* make sure we are connected (sta) joined */ + if (sta && + !test_and_clear_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) + return false; + + /* make sure we are joined (ibss) */ + if (!sta && + test_and_clear_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags)) + return false; + + if (sta) { + /* use defaults when not associated */ + wlvif->aid = 0; + + /* free probe-request template */ + dev_kfree_skb(wlvif->probereq); + wlvif->probereq = NULL; + + /* disable connection monitor features */ + ret = wl1271_acx_conn_monit_params(wl, wlvif, false); + if (ret < 0) + return ret; + + /* Disable the keep-alive feature */ + ret = wl1271_acx_keep_alive_mode(wl, wlvif, false); + if (ret < 0) + return ret; + } if (test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) { struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); @@ -2546,17 +2652,11 @@ static int wl1271_unjoin(struct wl1271 *wl, struct wl12xx_vif *wlvif) wlvif->sta.klv_template_id, ACX_KEEP_ALIVE_TPL_INVALID); - /* to stop listening to a channel, we disconnect */ - ret = wl12xx_cmd_role_stop_sta(wl, wlvif); - if (ret < 0) - goto out; - /* reset TX security counters on a clean disconnect */ wlvif->tx_security_last_seq_lsb = 0; wlvif->tx_security_seq = 0; -out: - return ret; + return 0; } static void wl1271_set_band_rate(struct wl1271 *wl, struct wl12xx_vif *wlvif) @@ -2565,45 +2665,6 @@ static void wl1271_set_band_rate(struct wl1271 *wl, struct wl12xx_vif *wlvif) wlvif->rate_set = wlvif->basic_rate_set; } -static int wl1271_sta_handle_idle(struct wl1271 *wl, struct wl12xx_vif *wlvif, - bool idle) -{ - int ret; - bool cur_idle = !test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); - - if (idle == cur_idle) - return 0; - - if (idle) { - /* no need to croc if we weren't busy (e.g. during boot) */ - if (wl12xx_dev_role_started(wlvif)) { - ret = wl12xx_stop_dev(wl, wlvif); - if (ret < 0) - goto out; - } - wlvif->rate_set = - wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); - ret = wl1271_acx_sta_rate_policies(wl, wlvif); - if (ret < 0) - goto out; - clear_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); - } else { - /* The current firmware only supports sched_scan in idle */ - if (wl->sched_scanning) { - wl1271_scan_sched_scan_stop(wl, wlvif); - ieee80211_sched_scan_stopped(wl->hw); - } - - ret = wl12xx_start_dev(wl, wlvif); - if (ret < 0) - goto out; - set_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); - } - -out: - return ret; -} - static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_conf *conf, u32 changed) { @@ -3418,30 +3479,6 @@ out: return ret; } -static int wl1271_ssid_set(struct ieee80211_vif *vif, struct sk_buff *skb, - int offset) -{ - struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); - u8 ssid_len; - const u8 *ptr = cfg80211_find_ie(WLAN_EID_SSID, skb->data + offset, - skb->len - offset); - - if (!ptr) { - wl1271_error("No SSID in IEs!"); - return -ENOENT; - } - - ssid_len = ptr[1]; - if (ssid_len > IEEE80211_MAX_SSID_LEN) { - wl1271_error("SSID is too long!"); - return -EINVAL; - } - - wlvif->ssid_len = ssid_len; - memcpy(wlvif->ssid, ptr+2, ssid_len); - return 0; -} - static void wl12xx_remove_ie(struct sk_buff *skb, u8 eid, int ieoffset) { int len; @@ -3622,7 +3659,7 @@ static int wlcore_set_beacon_template(struct wl1271 *wl, wl1271_debug(DEBUG_MASTER, "beacon updated"); - ret = wl1271_ssid_set(vif, beacon, ieoffset); + ret = wl1271_ssid_set(wlvif, beacon, ieoffset); if (ret < 0) { dev_kfree_skb(beacon); goto out; @@ -3804,6 +3841,81 @@ out: return; } +static int wlcore_set_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_bss_conf *bss_conf, + u32 sta_rate_set) +{ + u32 rates; + int ret; + + wl1271_debug(DEBUG_MAC80211, + "changed_bssid: %pM, aid: %d, bcn_int: %d, brates: 0x%x sta_rate_set: 0x%x", + bss_conf->bssid, bss_conf->aid, + bss_conf->beacon_int, + bss_conf->basic_rates, sta_rate_set); + + wlvif->beacon_int = bss_conf->beacon_int; + rates = bss_conf->basic_rates; + wlvif->basic_rate_set = + wl1271_tx_enabled_rates_get(wl, rates, + wlvif->band); + wlvif->basic_rate = + wl1271_tx_min_rate_get(wl, + wlvif->basic_rate_set); + + if (sta_rate_set) + wlvif->rate_set = + wl1271_tx_enabled_rates_get(wl, + sta_rate_set, + wlvif->band); + + /* we only support sched_scan while not connected */ + if (wl->sched_scanning) { + wl1271_scan_sched_scan_stop(wl, wlvif); + ieee80211_sched_scan_stopped(wl->hw); + } + + ret = wl1271_acx_sta_rate_policies(wl, wlvif); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_build_null_data(wl, wlvif); + if (ret < 0) + return ret; + + ret = wl1271_build_qos_null_data(wl, wl12xx_wlvif_to_vif(wlvif)); + if (ret < 0) + return ret; + + wlcore_set_ssid(wl, wlvif); + + set_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); + + return 0; +} + +static int wlcore_clear_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + int ret; + + /* revert back to minimum rates for the current band */ + wl1271_set_band_rate(wl, wlvif); + wlvif->basic_rate = wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); + + ret = wl1271_acx_sta_rate_policies(wl, wlvif); + if (ret < 0) + return ret; + + if (wlvif->bss_type == BSS_TYPE_STA_BSS && + test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) { + ret = wl12xx_cmd_role_stop_sta(wl, wlvif); + if (ret < 0) + return ret; + } + + clear_bit(WLVIF_FLAG_IN_USE, &wlvif->flags); + return 0; +} /* STA/IBSS mode changes */ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, struct ieee80211_vif *vif, @@ -3811,7 +3923,7 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, u32 changed) { struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); - bool do_join = false, set_assoc = false; + bool do_join = false; bool is_ibss = (wlvif->bss_type == BSS_TYPE_IBSS); bool ibss_joined = false; u32 sta_rate_set = 0; @@ -3832,9 +3944,8 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, set_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags); ibss_joined = true; } else { - if (test_and_clear_bit(WLVIF_FLAG_IBSS_JOINED, - &wlvif->flags)) - wl1271_unjoin(wl, wlvif); + wlcore_unset_assoc(wl, wlvif); + wl12xx_cmd_role_stop_sta(wl, wlvif); } } @@ -3852,12 +3963,6 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, do_join = true; } - if (changed & BSS_CHANGED_IDLE && !is_ibss) { - ret = wl1271_sta_handle_idle(wl, wlvif, bss_conf->idle); - if (ret < 0) - wl1271_warning("idle mode change failed %d", ret); - } - if ((changed & BSS_CHANGED_CQM)) { bool enable = false; if (bss_conf->cqm_rssi_thold) @@ -3870,18 +3975,7 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, wlvif->rssi_thold = bss_conf->cqm_rssi_thold; } - if (changed & BSS_CHANGED_BSSID) - if (!is_zero_ether_addr(bss_conf->bssid)) { - ret = wl12xx_cmd_build_null_data(wl, wlvif); - if (ret < 0) - goto out; - - ret = wl1271_build_qos_null_data(wl, vif); - if (ret < 0) - goto out; - } - - if (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_HT)) { + if (changed & (BSS_CHANGED_BSSID | BSS_CHANGED_HT)) { rcu_read_lock(); sta = ieee80211_find_sta(vif, bss_conf->bssid); if (!sta) @@ -3900,119 +3994,19 @@ sta_not_found: rcu_read_unlock(); } - if ((changed & BSS_CHANGED_ASSOC)) { - if (bss_conf->assoc) { - u32 rates; - int ieoffset; - wlvif->aid = bss_conf->aid; - wlvif->channel_type = bss_conf->channel_type; - wlvif->beacon_int = bss_conf->beacon_int; - do_join = true; - set_assoc = true; - - /* - * use basic rates from AP, and determine lowest rate - * to use with control frames. - */ - rates = bss_conf->basic_rates; - wlvif->basic_rate_set = - wl1271_tx_enabled_rates_get(wl, rates, - wlvif->band); - wlvif->basic_rate = - wl1271_tx_min_rate_get(wl, - wlvif->basic_rate_set); - if (sta_rate_set) - wlvif->rate_set = - wl1271_tx_enabled_rates_get(wl, - sta_rate_set, - wlvif->band); - ret = wl1271_acx_sta_rate_policies(wl, wlvif); - if (ret < 0) - goto out; - - /* - * with wl1271, we don't need to update the - * beacon_int and dtim_period, because the firmware - * updates it by itself when the first beacon is - * received after a join. - */ - ret = wl1271_cmd_build_ps_poll(wl, wlvif, wlvif->aid); + if (changed & BSS_CHANGED_BSSID) { + if (!is_zero_ether_addr(bss_conf->bssid)) { + ret = wlcore_set_bssid(wl, wlvif, bss_conf, + sta_rate_set); if (ret < 0) goto out; - /* - * Get a template for hardware connection maintenance - */ - dev_kfree_skb(wlvif->probereq); - wlvif->probereq = wl1271_cmd_build_ap_probe_req(wl, - wlvif, - NULL); - ieoffset = offsetof(struct ieee80211_mgmt, - u.probe_req.variable); - wl1271_ssid_set(vif, wlvif->probereq, ieoffset); - - /* enable the connection monitoring feature */ - ret = wl1271_acx_conn_monit_params(wl, wlvif, true); - if (ret < 0) - goto out; + /* Need to update the BSSID (for filtering etc) */ + do_join = true; } else { - /* use defaults when not associated */ - bool was_assoc = - !!test_and_clear_bit(WLVIF_FLAG_STA_ASSOCIATED, - &wlvif->flags); - bool was_ifup = - !!test_and_clear_bit(WLVIF_FLAG_STA_STATE_SENT, - &wlvif->flags); - wlvif->aid = 0; - - /* free probe-request template */ - dev_kfree_skb(wlvif->probereq); - wlvif->probereq = NULL; - - /* revert back to minimum rates for the current band */ - wl1271_set_band_rate(wl, wlvif); - wlvif->basic_rate = - wl1271_tx_min_rate_get(wl, - wlvif->basic_rate_set); - ret = wl1271_acx_sta_rate_policies(wl, wlvif); - if (ret < 0) - goto out; - - /* disable connection monitor features */ - ret = wl1271_acx_conn_monit_params(wl, wlvif, false); - - /* Disable the keep-alive feature */ - ret = wl1271_acx_keep_alive_mode(wl, wlvif, false); + ret = wlcore_clear_bssid(wl, wlvif); if (ret < 0) goto out; - - /* restore the bssid filter and go to dummy bssid */ - if (was_assoc) { - /* - * we might have to disable roc, if there was - * no IF_OPER_UP notification. - */ - if (!was_ifup) { - ret = wl12xx_croc(wl, wlvif->role_id); - if (ret < 0) - goto out; - } - /* - * (we also need to disable roc in case of - * roaming on the same channel. until we will - * have a better flow...) - */ - if (test_bit(wlvif->dev_role_id, wl->roc_map)) { - ret = wl12xx_croc(wl, - wlvif->dev_role_id); - if (ret < 0) - goto out; - } - - wl1271_unjoin(wl, wlvif); - if (!bss_conf->idle) - wl12xx_start_dev(wl, wlvif); - } } } @@ -4042,7 +4036,7 @@ sta_not_found: goto out; if (do_join) { - ret = wl1271_join(wl, wlvif, set_assoc); + ret = wlcore_join(wl, wlvif); if (ret < 0) { wl1271_warning("cmd join failed %d", ret); goto out; @@ -4053,18 +4047,19 @@ sta_not_found: ret = wl12xx_roc(wl, wlvif, wlvif->role_id); if (ret < 0) goto out; - - if (test_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags)) - wl12xx_set_authorized(wl, wlvif); } - /* - * stop device role if started (we might already be in - * STA/IBSS role). - */ - if (wl12xx_dev_role_started(wlvif)) { - ret = wl12xx_stop_dev(wl, wlvif); + } + + if (changed & BSS_CHANGED_ASSOC) { + if (bss_conf->assoc) { + ret = wlcore_set_assoc(wl, wlvif, bss_conf); if (ret < 0) goto out; + + if (test_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags)) + wl12xx_set_authorized(wl, wlvif); + } else { + wlcore_unset_assoc(wl, wlvif); } } @@ -4434,6 +4429,7 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, old_state == IEEE80211_STA_AUTHORIZED && new_state == IEEE80211_STA_ASSOC) { clear_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags); + clear_bit(WLVIF_FLAG_STA_STATE_SENT, &wlvif->flags); return 0; } diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index a90d3cd..a555a70 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -155,21 +155,13 @@ static u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 wl12xx_tx_get_hlid(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct sk_buff *skb, struct ieee80211_sta *sta) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - if (!wlvif || wl12xx_is_dummy_packet(wl, skb)) return wl->system_hlid; if (wlvif->bss_type == BSS_TYPE_AP_BSS) return wl12xx_tx_get_hlid_ap(wl, wlvif, skb, sta); - if ((test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) || - test_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags)) && - !ieee80211_is_auth(hdr->frame_control) && - !ieee80211_is_assoc_req(hdr->frame_control)) - return wlvif->sta.hlid; - else - return wlvif->dev_hlid; + return wlvif->sta.hlid; } unsigned int wlcore_calc_packet_alignment(struct wl1271 *wl, -- cgit v0.10.2 From 18eab430700dc877bae38cf04f0b0574b4724f0a Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:02 +0200 Subject: wlcore: workaround start_sta problem in wl12xx fw for some reason, the wl12xx fw is not able to rx/tx on the first start_sta cmd. Workaround it by issuing a dummy start_sta + stop_sta before starting the sta for the final time. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index dadf1db..6c9fba4 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -637,7 +637,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | WLCORE_QUIRK_DUAL_PROBE_TMPL | - WLCORE_QUIRK_TKIP_HEADER_SPACE; + WLCORE_QUIRK_TKIP_HEADER_SPACE | + WLCORE_QUIRK_START_STA_FAILS; wl->sr_fw_name = WL127X_FW_NAME_SINGLE; wl->mr_fw_name = WL127X_FW_NAME_MULTI; memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x, @@ -657,7 +658,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | WLCORE_QUIRK_DUAL_PROBE_TMPL | - WLCORE_QUIRK_TKIP_HEADER_SPACE; + WLCORE_QUIRK_TKIP_HEADER_SPACE | + WLCORE_QUIRK_START_STA_FAILS; wl->plt_fw_name = WL127X_PLT_FW_NAME; wl->sr_fw_name = WL127X_FW_NAME_SINGLE; wl->mr_fw_name = WL127X_FW_NAME_MULTI; @@ -682,7 +684,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl) /* wl128x requires TX blocksize alignment */ wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_DUAL_PROBE_TMPL | - WLCORE_QUIRK_TKIP_HEADER_SPACE; + WLCORE_QUIRK_TKIP_HEADER_SPACE | + WLCORE_QUIRK_START_STA_FAILS; wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, WL128X_IFTYPE_VER, WL128X_MAJOR_VER, WL128X_SUBTYPE_VER, diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 63367c0..054daae 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2490,8 +2490,21 @@ static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif) if (is_ibss) ret = wl12xx_cmd_role_start_ibss(wl, wlvif); - else + else { + if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) { + /* + * TODO: this is an ugly workaround for wl12xx fw + * bug - we are not able to tx/rx after the first + * start_sta, so make dummy start+stop calls, + * and then call start_sta again. + * this should be fixed in the fw. + */ + wl12xx_cmd_role_start_sta(wl, wlvif); + wl12xx_cmd_role_stop_sta(wl, wlvif); + } + ret = wl12xx_cmd_role_start_sta(wl, wlvif); + } return ret; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 68584aa..1030b6b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -450,6 +450,9 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* Each RX/TX transaction requires an end-of-transaction transfer */ #define WLCORE_QUIRK_END_OF_TRANSACTION BIT(0) +/* the first start_role(sta) sometimes doesn't work on wl12xx */ +#define WLCORE_QUIRK_START_STA_FAILS BIT(1) + /* wl127x and SPI don't support SDIO block size alignment */ #define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN BIT(2) -- cgit v0.10.2 From dabf37dba405565ab46f4d1821c781730285b9ed Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:03 +0200 Subject: wlcore: implement .remain_on_channel() callback implement the reamin_on_channel() callback by starting a dev role (already associated with the current vif) on the requested channel/band. This channel is usually different from the channel of the sta role, so pass it to wl12xx_roc() as well, and notify mac80211 (async) when the fw is ready on the new channel. Now, in case of offchannel tx, we should use the dev role hlid, instead of the sta hlid. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index eaef3f4..38fa8ff 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -345,7 +345,9 @@ static u8 wlcore_get_native_channel_type(u8 nl_channel_type) } static int wl12xx_cmd_role_start_dev(struct wl1271 *wl, - struct wl12xx_vif *wlvif) + struct wl12xx_vif *wlvif, + enum ieee80211_band band, + int channel) { struct wl12xx_cmd_role_start *cmd; int ret; @@ -359,9 +361,9 @@ static int wl12xx_cmd_role_start_dev(struct wl1271 *wl, wl1271_debug(DEBUG_CMD, "cmd role start dev %d", wlvif->dev_role_id); cmd->role_id = wlvif->dev_role_id; - if (wlvif->band == IEEE80211_BAND_5GHZ) + if (band == IEEE80211_BAND_5GHZ) cmd->band = WLCORE_BAND_5GHZ; - cmd->channel = wlvif->channel; + cmd->channel = channel; if (wlvif->dev_hlid == WL12XX_INVALID_LINK_ID) { ret = wl12xx_allocate_link(wl, wlvif, &wlvif->dev_hlid); @@ -1591,12 +1593,12 @@ out: } static int wl12xx_cmd_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, - u8 role_id) + u8 role_id, enum ieee80211_band band, u8 channel) { struct wl12xx_cmd_roc *cmd; int ret = 0; - wl1271_debug(DEBUG_CMD, "cmd roc %d (%d)", wlvif->channel, role_id); + wl1271_debug(DEBUG_CMD, "cmd roc %d (%d)", channel, role_id); if (WARN_ON(role_id == WL12XX_INVALID_ROLE_ID)) return -EINVAL; @@ -1608,8 +1610,8 @@ static int wl12xx_cmd_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, } cmd->role_id = role_id; - cmd->channel = wlvif->channel; - switch (wlvif->band) { + cmd->channel = channel; + switch (band) { case IEEE80211_BAND_2GHZ: cmd->band = WLCORE_BAND_2_4GHZ; break; @@ -1664,30 +1666,18 @@ out: return ret; } -int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id) +int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id, + enum ieee80211_band band, u8 channel) { int ret = 0; - bool is_first_roc; if (WARN_ON(test_bit(role_id, wl->roc_map))) return 0; - is_first_roc = (find_first_bit(wl->roc_map, WL12XX_MAX_ROLES) >= - WL12XX_MAX_ROLES); - - ret = wl12xx_cmd_roc(wl, wlvif, role_id); + ret = wl12xx_cmd_roc(wl, wlvif, role_id, band, channel); if (ret < 0) goto out; - if (is_first_roc) { - ret = wl1271_cmd_wait_for_event(wl, - REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID); - if (ret < 0) { - wl1271_error("cmd roc event completion error"); - goto out; - } - } - __set_bit(role_id, wl->roc_map); out: return ret; @@ -1780,7 +1770,8 @@ out: } /* start dev role and roc on its channel */ -int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif) +int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif, + enum ieee80211_band band, int channel) { int ret; @@ -1795,11 +1786,11 @@ int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif) if (ret < 0) goto out; - ret = wl12xx_cmd_role_start_dev(wl, wlvif); + ret = wl12xx_cmd_role_start_dev(wl, wlvif, band, channel); if (ret < 0) goto out_disable; - ret = wl12xx_roc(wl, wlvif, wlvif->dev_role_id); + ret = wl12xx_roc(wl, wlvif, wlvif->dev_role_id, band, channel); if (ret < 0) goto out_stop; diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 2409f3d..3be2e92 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -39,7 +39,8 @@ int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif); int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif); int wl12xx_cmd_role_stop_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif); int wl12xx_cmd_role_start_ibss(struct wl1271 *wl, struct wl12xx_vif *wlvif); -int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif, + enum ieee80211_band band, int channel); int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif); int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer); int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len); @@ -76,7 +77,8 @@ int wl1271_cmd_set_ap_key(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32, u16 tx_seq_16); int wl12xx_cmd_set_peer_state(struct wl1271 *wl, u8 hlid); -int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id); +int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id, + enum ieee80211_band band, u8 channel); int wl12xx_croc(struct wl1271 *wl, u8 role_id); int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_sta *sta, u8 hlid); diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index 4890705..cf45aaf 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -250,6 +250,13 @@ static int wl1271_event_process(struct wl1271 *wl) disconnect_sta = true; } + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID"); + if (wl->roc_vif) + ieee80211_ready_on_channel(wl->hw); + } + if (disconnect_sta) { u32 num_packets = wl->conf.tx.max_tx_retries; struct ieee80211_sta *sta; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 054daae..829d818 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2723,24 +2723,6 @@ static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, if (ret < 0) wl1271_warning("rate policy for channel " "failed %d", ret); - - /* - * change the ROC channel. do it only if we are - * not idle. otherwise, CROC will be called - * anyway. - */ - if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, - &wlvif->flags) && - wl12xx_dev_role_started(wlvif) && - !(conf->flags & IEEE80211_CONF_IDLE)) { - ret = wl12xx_stop_dev(wl, wlvif); - if (ret < 0) - return ret; - - ret = wl12xx_start_dev(wl, wlvif); - if (ret < 0) - return ret; - } } } @@ -4057,7 +4039,8 @@ sta_not_found: /* ROC until connected (after EAPOL exchange) */ if (!is_ibss) { - ret = wl12xx_roc(wl, wlvif, wlvif->role_id); + ret = wl12xx_roc(wl, wlvif, wlvif->role_id, + wlvif->band, wlvif->channel); if (ret < 0) goto out; } @@ -4692,6 +4675,134 @@ static void wlcore_op_flush(struct ieee80211_hw *hw, bool drop) wl1271_tx_flush(wl); } +static int wlcore_op_remain_on_channel(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + int duration) +{ + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + struct wl1271 *wl = hw->priv; + int channel, ret = 0; + + channel = ieee80211_frequency_to_channel(chan->center_freq); + + wl1271_debug(DEBUG_MAC80211, "mac80211 roc %d (%d)", + channel, wlvif->role_id); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + /* return EBUSY if we can't ROC right now */ + if (WARN_ON(wl->roc_vif || + find_first_bit(wl->roc_map, + WL12XX_MAX_ROLES) < WL12XX_MAX_ROLES)) { + ret = -EBUSY; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + ret = wl12xx_start_dev(wl, wlvif, chan->band, channel); + if (ret < 0) + goto out_sleep; + + wl->roc_vif = vif; + ieee80211_queue_delayed_work(hw, &wl->roc_complete_work, + msecs_to_jiffies(duration)); +out_sleep: + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); + return ret; +} + +static int __wlcore_roc_completed(struct wl1271 *wl) +{ + struct wl12xx_vif *wlvif; + int ret; + + /* already completed */ + if (unlikely(!wl->roc_vif)) + return 0; + + wlvif = wl12xx_vif_to_data(wl->roc_vif); + + if (!test_bit(WLVIF_FLAG_INITIALIZED, &wlvif->flags)) + return -EBUSY; + + ret = wl12xx_stop_dev(wl, wlvif); + if (ret < 0) + return ret; + + wl->roc_vif = NULL; + + return 0; +} + +static int wlcore_roc_completed(struct wl1271 *wl) +{ + int ret; + + wl1271_debug(DEBUG_MAC80211, "roc complete"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) { + ret = -EBUSY; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + ret = __wlcore_roc_completed(wl); + + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static void wlcore_roc_complete_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + int ret; + + dwork = container_of(work, struct delayed_work, work); + wl = container_of(dwork, struct wl1271, roc_complete_work); + + ret = wlcore_roc_completed(wl); + if (!ret) + ieee80211_remain_on_channel_expired(wl->hw); +} + +static int wlcore_op_cancel_remain_on_channel(struct ieee80211_hw *hw) +{ + struct wl1271 *wl = hw->priv; + + wl1271_debug(DEBUG_MAC80211, "mac80211 croc"); + + /* TODO: per-vif */ + wl1271_tx_flush(wl); + + /* + * we can't just flush_work here, because it might deadlock + * (as we might get called from the same workqueue) + */ + cancel_delayed_work_sync(&wl->roc_complete_work); + wlcore_roc_completed(wl); + + return 0; +} + static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw) { struct wl1271 *wl = hw->priv; @@ -4883,6 +4994,8 @@ static const struct ieee80211_ops wl1271_ops = { .set_bitrate_mask = wl12xx_set_bitrate_mask, .channel_switch = wl12xx_op_channel_switch, .flush = wlcore_op_flush, + .remain_on_channel = wlcore_op_remain_on_channel, + .cancel_remain_on_channel = wlcore_op_cancel_remain_on_channel, CFG80211_TESTMODE_CMD(wl1271_tm_cmd) }; @@ -5279,6 +5392,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->wiphy->max_sched_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE - sizeof(struct ieee80211_header); + wl->hw->wiphy->max_remain_on_channel_duration = 5000; + wl->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; @@ -5377,6 +5492,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) INIT_WORK(&wl->tx_work, wl1271_tx_work); INIT_WORK(&wl->recovery_work, wl1271_recovery_work); INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); + INIT_DELAYED_WORK(&wl->roc_complete_work, wlcore_roc_complete_work); INIT_DELAYED_WORK(&wl->tx_watchdog_work, wl12xx_tx_watchdog_work); INIT_DELAYED_WORK(&wl->connection_loss_work, wl1271_connection_loss_work); diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index a555a70..cf6dbee 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -155,12 +155,20 @@ static u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 wl12xx_tx_get_hlid(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct sk_buff *skb, struct ieee80211_sta *sta) { + struct ieee80211_tx_info *control; + if (!wlvif || wl12xx_is_dummy_packet(wl, skb)) return wl->system_hlid; if (wlvif->bss_type == BSS_TYPE_AP_BSS) return wl12xx_tx_get_hlid_ap(wl, wlvif, skb, sta); + control = IEEE80211_SKB_CB(skb); + if (control->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { + wl1271_debug(DEBUG_TX, "tx offchannel"); + return wlvif->dev_hlid; + } + return wlvif->sta.hlid; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 1030b6b..b636f1d 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -286,6 +286,9 @@ struct wl1271 { /* Connection loss work */ struct delayed_work connection_loss_work; + struct ieee80211_vif *roc_vif; + struct delayed_work roc_complete_work; + bool sched_scanning; /* The current band */ -- cgit v0.10.2 From cd1810ddcffbf779afb42c0c675aa93f5a86adda Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:04 +0200 Subject: wlcore: get channel from bss_conf instead of hw->conf We care only about the operational channel, not about the temporal hw channel (which won't have any real meaning in multi-channel env anyway) Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 829d818..03765cf 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3977,7 +3977,7 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, goto sta_not_found; /* save the supp_rates of the ap */ - sta_rate_set = sta->supp_rates[wl->hw->conf.channel->band]; + sta_rate_set = sta->supp_rates[wlvif->band]; if (sta->ht_cap.ht_supported) sta_rate_set |= (sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET) | -- cgit v0.10.2 From b6970ee582acf059fbbc35d861376bd2ae38b7de Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:05 +0200 Subject: wlcore: add chanctx implementation Add some basic chanctx implementation - debug prints, and save the vif's channel/band/type. After that, we no longer need to handle channel change notifications on op_config. Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 03765cf..d5cd58c 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2682,49 +2682,7 @@ static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_conf *conf, u32 changed) { bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); - int channel, ret; - - channel = ieee80211_frequency_to_channel(conf->channel->center_freq); - - /* if the channel changes while joined, join again */ - if (changed & IEEE80211_CONF_CHANGE_CHANNEL && - ((wlvif->band != conf->channel->band) || - (wlvif->channel != channel) || - (wlvif->channel_type != conf->channel_type))) { - /* send all pending packets */ - ret = wlcore_tx_work_locked(wl); - if (ret < 0) - return ret; - - wlvif->band = conf->channel->band; - wlvif->channel = channel; - wlvif->channel_type = conf->channel_type; - - if (is_ap) { - wl1271_set_band_rate(wl, wlvif); - ret = wl1271_init_ap_rates(wl, wlvif); - if (ret < 0) - wl1271_error("AP rate policy change failed %d", - ret); - } else { - /* - * FIXME: the mac80211 should really provide a fixed - * rate to use here. for now, just use the smallest - * possible rate for the band as a fixed rate for - * association frames and other control messages. - */ - if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) - wl1271_set_band_rate(wl, wlvif); - - wlvif->basic_rate = - wl1271_tx_min_rate_get(wl, - wlvif->basic_rate_set); - ret = wl1271_acx_sta_rate_policies(wl, wlvif); - if (ret < 0) - wl1271_warning("rate policy for channel " - "failed %d", ret); - } - } + int ret; if ((changed & IEEE80211_CONF_CHANGE_PS) && !is_ap) { @@ -2779,37 +2737,17 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) struct wl1271 *wl = hw->priv; struct wl12xx_vif *wlvif; struct ieee80211_conf *conf = &hw->conf; - int channel, ret = 0; - - channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int ret = 0; - wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s" + wl1271_debug(DEBUG_MAC80211, "mac80211 config psm %s power %d %s" " changed 0x%x", - channel, conf->flags & IEEE80211_CONF_PS ? "on" : "off", conf->power_level, conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use", changed); - /* - * mac80211 will go to idle nearly immediately after transmitting some - * frames, such as the deauth. To make sure those frames reach the air, - * wait here until the TX queue is fully flushed. - */ - if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || - ((changed & IEEE80211_CONF_CHANGE_IDLE) && - (conf->flags & IEEE80211_CONF_IDLE))) - wl1271_tx_flush(wl); - mutex_lock(&wl->mutex); - /* we support configuring the channel and band even while off */ - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - wl->band = conf->channel->band; - wl->channel = channel; - wl->channel_type = conf->channel_type; - } - if (changed & IEEE80211_CONF_CHANGE_POWER) wl->power_level = conf->power_level; @@ -3758,7 +3696,7 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); int ret = 0; - if ((changed & BSS_CHANGED_BASIC_RATES)) { + if (changed & BSS_CHANGED_BASIC_RATES) { u32 rates = bss_conf->basic_rates; wlvif->basic_rate_set = wl1271_tx_enabled_rates_get(wl, rates, @@ -4184,6 +4122,76 @@ out: mutex_unlock(&wl->mutex); } +static int wlcore_op_add_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx) +{ + wl1271_debug(DEBUG_MAC80211, "mac80211 add chanctx %d (type %d)", + ieee80211_frequency_to_channel(ctx->channel->center_freq), + ctx->channel_type); + return 0; +} + +static void wlcore_op_remove_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx) +{ + wl1271_debug(DEBUG_MAC80211, "mac80211 remove chanctx %d (type %d)", + ieee80211_frequency_to_channel(ctx->channel->center_freq), + ctx->channel_type); +} + +static void wlcore_op_change_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + u32 changed) +{ + wl1271_debug(DEBUG_MAC80211, + "mac80211 change chanctx %d (type %d) changed 0x%x", + ieee80211_frequency_to_channel(ctx->channel->center_freq), + ctx->channel_type, changed); +} + +static int wlcore_op_assign_vif_chanctx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx) +{ + struct wl1271 *wl = hw->priv; + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + int channel = ieee80211_frequency_to_channel( + ctx->channel->center_freq); + + wl1271_debug(DEBUG_MAC80211, + "mac80211 assign chanctx (role %d) %d (type %d)", + wlvif->role_id, channel, ctx->channel_type); + + mutex_lock(&wl->mutex); + + wlvif->band = ctx->channel->band; + wlvif->channel = channel; + wlvif->channel_type = ctx->channel_type; + + /* update default rates according to the band */ + wl1271_set_band_rate(wl, wlvif); + + mutex_unlock(&wl->mutex); + + return 0; +} + +static void wlcore_op_unassign_vif_chanctx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx) +{ + struct wl1271 *wl = hw->priv; + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + + wl1271_debug(DEBUG_MAC80211, + "mac80211 unassign chanctx (role %d) %d (type %d)", + wlvif->role_id, + ieee80211_frequency_to_channel(ctx->channel->center_freq), + ctx->channel_type); + + wl1271_tx_flush(wl); +} + static int wl1271_op_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) @@ -4996,6 +5004,11 @@ static const struct ieee80211_ops wl1271_ops = { .flush = wlcore_op_flush, .remain_on_channel = wlcore_op_remain_on_channel, .cancel_remain_on_channel = wlcore_op_cancel_remain_on_channel, + .add_chanctx = wlcore_op_add_chanctx, + .remove_chanctx = wlcore_op_remove_chanctx, + .change_chanctx = wlcore_op_change_chanctx, + .assign_vif_chanctx = wlcore_op_assign_vif_chanctx, + .unassign_vif_chanctx = wlcore_op_unassign_vif_chanctx, CFG80211_TESTMODE_CMD(wl1271_tm_cmd) }; -- cgit v0.10.2 From 29936266780295c812b9b8ac27a3db669e0ed1be Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:06 +0200 Subject: wlcore: initiate ROC/CROC on sta state updates Use the sta_state notifications to ROC when a station is about to connect, and CROC respectively on authorization (success) / deletion (failure). Change the wl12xx_update_sta_state() flow to bail out only on error, so multiple code blocks could refer to the same state. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d5cd58c..11aedb2 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -83,8 +83,6 @@ static int wl12xx_set_authorized(struct wl1271 *wl, if (ret < 0) return ret; - wl12xx_croc(wl, wlvif->role_id); - wl1271_info("Association completed."); return 0; } @@ -3974,14 +3972,6 @@ sta_not_found: wl1271_warning("cmd join failed %d", ret); goto out; } - - /* ROC until connected (after EAPOL exchange) */ - if (!is_ibss) { - ret = wl12xx_roc(wl, wlvif, wlvif->role_id, - wlvif->band, wlvif->channel); - if (ret < 0) - goto out; - } } if (changed & BSS_CHANGED_ASSOC) { @@ -4398,8 +4388,11 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, /* Add station (AP mode) */ if (is_ap && old_state == IEEE80211_STA_NOTEXIST && - new_state == IEEE80211_STA_NONE) - return wl12xx_sta_add(wl, wlvif, sta); + new_state == IEEE80211_STA_NONE) { + ret = wl12xx_sta_add(wl, wlvif, sta); + if (ret) + return ret; + } /* Remove station (AP mode) */ if (is_ap && @@ -4407,7 +4400,6 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, new_state == IEEE80211_STA_NOTEXIST) { /* must not fail */ wl12xx_sta_remove(wl, wlvif, sta); - return 0; } /* Authorize station (AP mode) */ @@ -4419,14 +4411,17 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true, hlid); - return ret; + if (ret) + return ret; } /* Authorize station */ if (is_sta && new_state == IEEE80211_STA_AUTHORIZED) { set_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags); - return wl12xx_set_authorized(wl, wlvif); + ret = wl12xx_set_authorized(wl, wlvif); + if (ret) + return ret; } if (is_sta && @@ -4434,9 +4429,26 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, new_state == IEEE80211_STA_ASSOC) { clear_bit(WLVIF_FLAG_STA_AUTHORIZED, &wlvif->flags); clear_bit(WLVIF_FLAG_STA_STATE_SENT, &wlvif->flags); - return 0; } + /* clear ROCs on failure or authorization */ + if (is_sta && + (new_state == IEEE80211_STA_AUTHORIZED || + new_state == IEEE80211_STA_NOTEXIST)) { + if (test_bit(wlvif->role_id, wl->roc_map)) + wl12xx_croc(wl, wlvif->role_id); + } + + if (is_sta && + old_state == IEEE80211_STA_NOTEXIST && + new_state == IEEE80211_STA_NONE) { + if (find_first_bit(wl->roc_map, + WL12XX_MAX_ROLES) >= WL12XX_MAX_ROLES) { + WARN_ON(wlvif->role_id == WL12XX_INVALID_ROLE_ID); + wl12xx_roc(wl, wlvif, wlvif->role_id, + wlvif->band, wlvif->channel); + } + } return 0; } -- cgit v0.10.2 From 6c7b519464cf6c64b02ea0d9e41bd2e49bbd51ce Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:07 +0200 Subject: wlcore: set active psm on association The default ps mode of the fw is auto, while the default ps mode of mac80211 is active (ps off). In order to sync them, configure active ps on association. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 11aedb2..e02f2aa 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2614,6 +2614,12 @@ static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif, if (ret < 0) return ret; + /* + * The default fw psm configuration is AUTO, while mac80211 default + * setting is off (ACTIVE), so sync the fw with the correct value. + */ + ret = wl1271_ps_set_mode(wl, wlvif, STATION_ACTIVE_MODE); + return ret; } -- cgit v0.10.2 From 42ec1f82a862b38eb84bc3bbd7fb97b1aa48f18c Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:08 +0200 Subject: wlcore: specify correct supported_rates The supported_rates field should contain all our supported rates, even if the remote peer doesn't support them. (rename CONF_TX_AP_ENABLED_RATES to CONF_TX_ENABLED_RATES, as we now use it for both ap and sta) Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 38fa8ff..1cf1225 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -441,6 +441,7 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) { struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); struct wl12xx_cmd_role_start *cmd; + u32 supported_rates; int ret; cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); @@ -461,7 +462,14 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->sta.ssid_len = wlvif->ssid_len; memcpy(cmd->sta.ssid, wlvif->ssid, wlvif->ssid_len); memcpy(cmd->sta.bssid, vif->bss_conf.bssid, ETH_ALEN); - cmd->sta.local_rates = cpu_to_le32(wlvif->rate_set); + + supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES | + wlcore_hw_sta_get_ap_rate_mask(wl, wlvif); + if (wlvif->p2p) + supported_rates &= ~CONF_TX_CCK_RATES; + + cmd->sta.local_rates = cpu_to_le32(supported_rates); + cmd->channel_type = wlcore_get_native_channel_type(wlvif->channel_type); if (wlvif->sta.hlid == WL12XX_INVALID_LINK_ID) { @@ -601,7 +609,7 @@ int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif) memcpy(cmd->ap.ssid, bss_conf->ssid, bss_conf->ssid_len); } - supported_rates = CONF_TX_AP_ENABLED_RATES | CONF_TX_MCS_RATES | + supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES | wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif); wl1271_debug(DEBUG_CMD, "cmd role start ap with supported_rates 0x%08x", diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 9e40760..a5d1908 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -415,11 +415,11 @@ struct conf_rx_settings { #define CONF_TX_RATE_MASK_BASIC_P2P CONF_HW_BIT_RATE_6MBPS /* - * Rates supported for data packets when operating as AP. Note the absence + * Rates supported for data packets when operating as STA/AP. Note the absence * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop * one. The rate dropped is not mandatory under any operating mode. */ -#define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ +#define CONF_TX_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \ CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \ diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 32d157f..84641b3 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -463,7 +463,7 @@ int wl1271_init_ap_rates(struct wl1271 *wl, struct wl12xx_vif *wlvif) if ((wlvif->basic_rate_set & CONF_TX_OFDM_RATES)) supported_rates = CONF_TX_OFDM_RATES; else - supported_rates = CONF_TX_AP_ENABLED_RATES; + supported_rates = CONF_TX_ENABLED_RATES; /* unconditionally enable HT rates */ supported_rates |= CONF_TX_MCS_RATES; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index e02f2aa..ef1fd04 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2035,15 +2035,15 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) for (i = 0; i < CONF_TX_MAX_AC_COUNT; i++) wl12xx_allocate_rate_policy(wl, &wlvif->ap.ucast_rate_idx[i]); - wlvif->basic_rate_set = CONF_TX_AP_ENABLED_RATES; + wlvif->basic_rate_set = CONF_TX_ENABLED_RATES; /* * TODO: check if basic_rate shouldn't be * wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set); * instead (the same thing for STA above). */ - wlvif->basic_rate = CONF_TX_AP_ENABLED_RATES; + wlvif->basic_rate = CONF_TX_ENABLED_RATES; /* TODO: this seems to be used only for STA, check it */ - wlvif->rate_set = CONF_TX_AP_ENABLED_RATES; + wlvif->rate_set = CONF_TX_ENABLED_RATES; } wlvif->bitrate_masks[IEEE80211_BAND_2GHZ] = wl->conf.tx.basic_rate; -- cgit v0.10.2 From ec87011a4ac30a4a6ddfbf5dc17e302a490c7763 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:09 +0200 Subject: wlcore: reconfigure rate policy on association When first configuring the rate policy, before auth, we still don't have the correct rates that were agreed during association. Reconfigure the rate policy on association in order to update them. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index ef1fd04..87fa426 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2553,7 +2553,8 @@ static int wlcore_set_ssid(struct wl1271 *wl, struct wl12xx_vif *wlvif) } static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct ieee80211_bss_conf *bss_conf) + struct ieee80211_bss_conf *bss_conf, + u32 sta_rate_set) { int ieoffset; int ret; @@ -2619,6 +2620,18 @@ static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif, * setting is off (ACTIVE), so sync the fw with the correct value. */ ret = wl1271_ps_set_mode(wl, wlvif, STATION_ACTIVE_MODE); + if (ret < 0) + return ret; + + if (sta_rate_set) { + wlvif->rate_set = + wl1271_tx_enabled_rates_get(wl, + sta_rate_set, + wlvif->band); + ret = wl1271_acx_sta_rate_policies(wl, wlvif); + if (ret < 0) + return ret; + } return ret; } @@ -3912,7 +3925,8 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, wlvif->rssi_thold = bss_conf->cqm_rssi_thold; } - if (changed & (BSS_CHANGED_BSSID | BSS_CHANGED_HT)) { + if (changed & (BSS_CHANGED_BSSID | BSS_CHANGED_HT | + BSS_CHANGED_ASSOC)) { rcu_read_lock(); sta = ieee80211_find_sta(vif, bss_conf->bssid); if (!sta) @@ -3982,7 +3996,8 @@ sta_not_found: if (changed & BSS_CHANGED_ASSOC) { if (bss_conf->assoc) { - ret = wlcore_set_assoc(wl, wlvif, bss_conf); + ret = wlcore_set_assoc(wl, wlvif, bss_conf, + sta_rate_set); if (ret < 0) goto out; -- cgit v0.10.2 From 58321b296de93df4a060f012151213fe1a1a3498 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:10 +0200 Subject: wlcore: refactor CHANGED_HT handling Pass a variable indicating whether HT is enabled, instead of duplicating the function call with different arguments. Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 87fa426..f526ae0 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4009,44 +4009,32 @@ sta_not_found: } /* Handle new association with HT. Do this after join. */ - if (sta_exists) { - if ((changed & BSS_CHANGED_HT) && - (bss_conf->channel_type != NL80211_CHAN_NO_HT)) { - ret = wl1271_acx_set_ht_capabilities(wl, - &sta_ht_cap, - true, - wlvif->sta.hlid); - if (ret < 0) { - wl1271_warning("Set ht cap true failed %d", - ret); - goto out; - } + if (sta_exists && + (changed & BSS_CHANGED_HT)) { + bool enabled = + bss_conf->channel_type != NL80211_CHAN_NO_HT; + + ret = wl1271_acx_set_ht_capabilities(wl, + &sta_ht_cap, + enabled, + wlvif->sta.hlid); + if (ret < 0) { + wl1271_warning("Set ht cap failed %d", ret); + goto out; + } - /* handle new association without HT and disassociation */ - else if (changed & BSS_CHANGED_ASSOC) { - ret = wl1271_acx_set_ht_capabilities(wl, - &sta_ht_cap, - false, - wlvif->sta.hlid); + + if (enabled) { + ret = wl1271_acx_set_ht_information(wl, wlvif, + bss_conf->ht_operation_mode); if (ret < 0) { - wl1271_warning("Set ht cap false failed %d", + wl1271_warning("Set ht information failed %d", ret); goto out; } } } - /* Handle HT information change. Done after join. */ - if ((changed & BSS_CHANGED_HT) && - (bss_conf->channel_type != NL80211_CHAN_NO_HT)) { - ret = wl1271_acx_set_ht_information(wl, wlvif, - bss_conf->ht_operation_mode); - if (ret < 0) { - wl1271_warning("Set ht information failed %d", ret); - goto out; - } - } - /* Handle arp filtering. Done after join. */ if ((changed & BSS_CHANGED_ARP_FILTER) || (!is_ibss && (changed & BSS_CHANGED_QOS))) { -- cgit v0.10.2 From dc62a3dbf38a7c3aa5a7ae724b04e0fefc10fea4 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 20 Nov 2012 13:20:11 +0200 Subject: wlcore: configure the remote rates with our own rates With the new connection flow, start_sta is called before the remote rates where updated. Use our own supported rates instead to make sure we don't disable any potential rate (the rate policies will be updated later, but there is currently no way to update the remote rates) Signed-off-by: Eliad Peller Reviewed-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1cf1225..04ba86d 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -479,7 +479,12 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) } cmd->sta.hlid = wlvif->sta.hlid; cmd->sta.session = wl12xx_get_new_session_id(wl, wlvif); - cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set); + /* + * We don't have the correct remote rates in this stage, and there + * is no way to update them later, so use our supported rates instead. + * The fw will take the configured rate policies into account anyway. + */ + cmd->sta.remote_rates = cpu_to_le32(supported_rates); wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d " "basic_rate_set: 0x%x, remote_rates: 0x%x", -- cgit v0.10.2 From d3f5a1b59839e3df3e40b9e520d16b8475d27681 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 19 Nov 2012 17:14:05 +0200 Subject: wlcore: print role_id on bss_info_changed In multi-vif setup it's useful to know the role_id being configured. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index f526ae0..a420ba3 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4084,8 +4084,8 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); int ret; - wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed 0x%x", - (int)changed); + wl1271_debug(DEBUG_MAC80211, "mac80211 bss info role %d changed 0x%x", + wlvif->role_id, (int)changed); /* * make sure to cancel pending disconnections if our association -- cgit v0.10.2 From a8e27820f27155d2eaea2426b10bac810c293f3b Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 19 Nov 2012 17:14:06 +0200 Subject: wlcore: don't leak wl->mbox free it on wlcore_free_hw() Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index a420ba3..d425bd5 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5638,6 +5638,7 @@ int wlcore_free_hw(struct wl1271 *wl) device_remove_file(wl->dev, &dev_attr_hw_pg_ver); device_remove_file(wl->dev, &dev_attr_bt_coex_state); + kfree(wl->mbox); free_page((unsigned long)wl->fwlog); dev_kfree_skb(wl->dummy_packet); free_pages((unsigned long)wl->aggr_buf, get_order(wl->aggr_buf_size)); -- cgit v0.10.2 From ef08d0281a90781b07d2030c1c69f4fb2f156267 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 20 Nov 2012 11:03:31 +0200 Subject: wlcore: avoid using goto in normal code flow Remove goto and label in the code where a simple if can be used. If nothing else, this is at least confusing git diff, which shows the label name as the name of the function. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d425bd5..e488056 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3929,19 +3929,19 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, BSS_CHANGED_ASSOC)) { rcu_read_lock(); sta = ieee80211_find_sta(vif, bss_conf->bssid); - if (!sta) - goto sta_not_found; - - /* save the supp_rates of the ap */ - sta_rate_set = sta->supp_rates[wlvif->band]; - if (sta->ht_cap.ht_supported) - sta_rate_set |= - (sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET) | - (sta->ht_cap.mcs.rx_mask[1] << HW_MIMO_RATES_OFFSET); - sta_ht_cap = sta->ht_cap; - sta_exists = true; - -sta_not_found: + if (sta) { + u8 *rx_mask = sta->ht_cap.mcs.rx_mask; + + /* save the supp_rates of the ap */ + sta_rate_set = sta->supp_rates[wlvif->band]; + if (sta->ht_cap.ht_supported) + sta_rate_set |= + (rx_mask[0] << HW_HT_RATES_OFFSET) | + (rx_mask[1] << HW_MIMO_RATES_OFFSET); + sta_ht_cap = sta->ht_cap; + sta_exists = true; + } + rcu_read_unlock(); } -- cgit v0.10.2 From 48af2eb046bd452f381f142b19cf9c86ddf575f5 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 20 Nov 2012 11:03:32 +0200 Subject: wlcore: remove a bunch of unnecessary parentheses Some if statements had unnecessary parentheses. Remove them for consistency. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index e488056..11ee7cc 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3679,7 +3679,7 @@ static int wl1271_bss_beacon_info_changed(struct wl1271 *wl, bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); int ret = 0; - if ((changed & BSS_CHANGED_BEACON_INT)) { + if (changed & BSS_CHANGED_BEACON_INT) { wl1271_debug(DEBUG_MASTER, "beacon interval updated: %d", bss_conf->beacon_int); @@ -3692,7 +3692,7 @@ static int wl1271_bss_beacon_info_changed(struct wl1271 *wl, wl1271_ap_set_probe_resp_tmpl(wl, rate, vif); } - if ((changed & BSS_CHANGED_BEACON)) { + if (changed & BSS_CHANGED_BEACON) { ret = wlcore_set_beacon_template(wl, vif, is_ap); if (ret < 0) goto out; @@ -3744,7 +3744,7 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl, if (ret < 0) goto out; - if ((changed & BSS_CHANGED_BEACON_ENABLED)) { + if (changed & BSS_CHANGED_BEACON_ENABLED) { if (bss_conf->enable_beacon) { if (!test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) { ret = wl12xx_cmd_role_start_ap(wl, wlvif); @@ -3913,7 +3913,7 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, do_join = true; } - if ((changed & BSS_CHANGED_CQM)) { + if (changed & BSS_CHANGED_CQM) { bool enable = false; if (bss_conf->cqm_rssi_thold) enable = true; -- cgit v0.10.2 From 598b262a06235ced311a5327e1fbcedd74da53c9 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:11 +0200 Subject: wlcore: don't call ieee80211_sched_scan_stopped directly When we stop sched scan during connection, we shouldn't call ieee80211_sched_scan_stopped directly, but do it in the normal flow, as part of the SCHED_SCAN_COMPLETED event handling. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 11ee7cc..111b84f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3820,10 +3820,8 @@ static int wlcore_set_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif, wlvif->band); /* we only support sched_scan while not connected */ - if (wl->sched_scanning) { + if (wl->sched_scanning) wl1271_scan_sched_scan_stop(wl, wlvif); - ieee80211_sched_scan_stopped(wl->hw); - } ret = wl1271_acx_sta_rate_policies(wl, wlvif); if (ret < 0) -- cgit v0.10.2 From 512c5385e6dc86addc9e51848913378052aa5e03 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:12 +0200 Subject: wlcore: make scan scan configuration functions more generic 18xx and 12xx have different scan APIs. In 18xx, the scan and the sched scan use the same struct. Prepare the scan configuration functions to it, by taking more generic params (e.g. ieee80211_channel) instead of specific structs/requests. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index d005014..22dd7e9 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -403,17 +403,19 @@ out: } static int -wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, - struct cfg80211_sched_scan_request *req, - struct conn_scan_ch_params *channels, - u32 band, bool radar, bool passive, - int start, int max_channels, - u8 *n_pactive_ch) +wlcore_scan_get_channels(struct wl1271 *wl, + struct ieee80211_channel *req_channels[], + u32 n_channels, + u32 n_ssids, + struct conn_scan_ch_params *channels, + u32 band, bool radar, bool passive, + int start, int max_channels, + u8 *n_pactive_ch) { struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; - bool force_passive = !req->n_ssids; + bool force_passive = !n_ssids; u32 min_dwell_time_active, max_dwell_time_active, delta_per_probe; u32 dwell_time_passive, dwell_time_dfs; @@ -423,7 +425,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, delta_per_probe = c->dwell_time_delta_per_probe; min_dwell_time_active = c->base_dwell_time + - req->n_ssids * c->num_probe_reqs * delta_per_probe; + n_ssids * c->num_probe_reqs * delta_per_probe; max_dwell_time_active = min_dwell_time_active + c->max_dwell_time_delta; @@ -433,27 +435,27 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, dwell_time_dfs = DIV_ROUND_UP(c->dwell_time_dfs, 1000); for (i = 0, j = start; - i < req->n_channels && j < max_channels; + i < n_channels && j < max_channels; i++) { - flags = req->channels[i]->flags; + flags = req_channels[i]->flags; if (force_passive) flags |= IEEE80211_CHAN_PASSIVE_SCAN; - if ((req->channels[i]->band == band) && + if ((req_channels[i]->band == band) && !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && /* if radar is set, we ignore the passive flag */ (radar || !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", - req->channels[i]->band, - req->channels[i]->center_freq); + req_channels[i]->band, + req_channels[i]->center_freq); wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", - req->channels[i]->hw_value, - req->channels[i]->flags); + req_channels[i]->hw_value, + req_channels[i]->flags); wl1271_debug(DEBUG_SCAN, "max_power %d", - req->channels[i]->max_power); + req_channels[i]->max_power); wl1271_debug(DEBUG_SCAN, "min_dwell_time %d max dwell time %d", min_dwell_time_active, max_dwell_time_active); @@ -473,10 +475,11 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, channels[j].max_duration = cpu_to_le16(max_dwell_time_active); - channels[j].tx_power_att = req->channels[i]->max_power; - channels[j].channel = req->channels[i]->hw_value; + channels[j].tx_power_att = req_channels[i]->max_power; + channels[j].channel = req_channels[i]->hw_value; - if ((band == IEEE80211_BAND_2GHZ) && + if (n_pactive_ch && + (band == IEEE80211_BAND_2GHZ) && (channels[j].channel >= 12) && (channels[j].channel <= 14) && (flags & IEEE80211_CHAN_PASSIVE_SCAN) && @@ -501,45 +504,68 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, } static bool -wl1271_scan_sched_scan_channels(struct wl1271 *wl, - struct cfg80211_sched_scan_request *req, - struct wl1271_cmd_sched_scan_config *cfg) +wlcore_set_scan_chan_params(struct wl1271 *wl, + struct wl1271_cmd_sched_scan_config *cfg, + struct ieee80211_channel *channels[], + u32 n_channels, + u32 n_ssids) { u8 n_pactive_ch = 0; cfg->passive[0] = - wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_2, - IEEE80211_BAND_2GHZ, - false, true, 0, - MAX_CHANNELS_2GHZ, - &n_pactive_ch); + wlcore_scan_get_channels(wl, + channels, + n_channels, + n_ssids, + cfg->channels_2, + IEEE80211_BAND_2GHZ, + false, true, 0, + MAX_CHANNELS_2GHZ, + &n_pactive_ch); cfg->active[0] = - wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_2, - IEEE80211_BAND_2GHZ, - false, false, - cfg->passive[0], - MAX_CHANNELS_2GHZ, - &n_pactive_ch); + wlcore_scan_get_channels(wl, + channels, + n_channels, + n_ssids, + cfg->channels_2, + IEEE80211_BAND_2GHZ, + false, false, + cfg->passive[0], + MAX_CHANNELS_2GHZ, + &n_pactive_ch); cfg->passive[1] = - wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, - IEEE80211_BAND_5GHZ, - false, true, 0, - MAX_CHANNELS_5GHZ, - &n_pactive_ch); + wlcore_scan_get_channels(wl, + channels, + n_channels, + n_ssids, + cfg->channels_5, + IEEE80211_BAND_5GHZ, + false, true, 0, + MAX_CHANNELS_5GHZ, + &n_pactive_ch); cfg->dfs = - wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, - IEEE80211_BAND_5GHZ, - true, true, - cfg->passive[1], - MAX_CHANNELS_5GHZ, - &n_pactive_ch); + wlcore_scan_get_channels(wl, + channels, + n_channels, + n_ssids, + cfg->channels_5, + IEEE80211_BAND_5GHZ, + true, true, + cfg->passive[1], + MAX_CHANNELS_5GHZ, + &n_pactive_ch); cfg->active[1] = - wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, - IEEE80211_BAND_5GHZ, - false, false, - cfg->passive[1] + cfg->dfs, - MAX_CHANNELS_5GHZ, - &n_pactive_ch); + wlcore_scan_get_channels(wl, + channels, + n_channels, + n_ssids, + cfg->channels_5, + IEEE80211_BAND_5GHZ, + false, false, + cfg->passive[1] + cfg->dfs, + MAX_CHANNELS_5GHZ, + &n_pactive_ch); + /* 802.11j channels are not supported yet */ cfg->passive[2] = 0; cfg->active[2] = 0; @@ -705,7 +731,8 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); - if (!wl1271_scan_sched_scan_channels(wl, req, cfg)) { + if (!wlcore_set_scan_chan_params(wl, cfg, req->channels, + req->n_channels, req->n_ssids)) { wl1271_error("scan channel list is empty"); ret = -EINVAL; goto out; -- cgit v0.10.2 From 750a986d6a69f3f9ed7913bab8c6d171f291ebe6 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:13 +0200 Subject: wl18xx: change fw name and temporarily fail loading The new fw (8.5.0.0.28) is not backward compatible with older drivers. Use a new fw name (along with bumping the min fw version), and add some code to fail any boot attempt during the fw api alignment patches (as the driver is not functional in these transitional patches). This code will be removed after the api alignment will be done. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a39682a..8ba1c93 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -595,7 +595,7 @@ static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = { }; /* TODO: maybe move to a new header file? */ -#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw.bin" +#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-2.bin" static int wl18xx_identify_chip(struct wl1271 *wl) { @@ -1385,6 +1385,10 @@ static int wl18xx_setup(struct wl1271 *wl) struct wl18xx_priv *priv = wl->priv; int ret; + wl1271_error("driver is in transitional commit (due to fw api" + "change) and can't be booted!"); + return -EINVAL; + wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 96a1e43..4d295a5 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -26,10 +26,10 @@ /* minimum FW required for driver */ #define WL18XX_CHIP_VER 8 -#define WL18XX_IFTYPE_VER 2 +#define WL18XX_IFTYPE_VER 5 #define WL18XX_MAJOR_VER 0 #define WL18XX_SUBTYPE_VER 0 -#define WL18XX_MINOR_VER 100 +#define WL18XX_MINOR_VER 28 #define WL18XX_CMD_MAX_SIZE 740 -- cgit v0.10.2 From e9b9d4550733dc322cd0d191e0423a480d9180ef Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:14 +0200 Subject: wlcore: update commands enum to new fw api Align the commands enum with the new fw api (8.4.0.0.19) Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 3be2e92..d021305 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -151,8 +151,11 @@ enum wl1271_commands { CMD_WFD_START_DISCOVERY = 45, CMD_WFD_STOP_DISCOVERY = 46, CMD_WFD_ATTRIBUTE_CONFIG = 47, - CMD_NOP = 48, - CMD_LAST_COMMAND, + CMD_GENERIC_CFG = 48, + CMD_NOP = 49, + + /* start of 18xx specific commands */ + CMD_DFS_CHANNEL_CONFIG = 60, MAX_COMMAND_ID = 0xFFFF, }; -- cgit v0.10.2 From 78e28062fea51c62280cd17fe6143ed583f83ba0 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:15 +0200 Subject: wlcore: split 18xx and 12xx scan mechanism The scan APIs of 12xx and 18xx are totally different. Use some common functions as much as possible (e.g. for setting scan channels), but split scan.c into chip-specific scan.c files, each implementing its own scan mechanism. (in other words - move most of the current wlcore's scan.c into wl12xx, and implement a similar mechanism in 18xx, according to the new api) New wlcore ops are introduced in order to call the chip-specific scan functions. The template indices used for each scan (regular/scheduled) are also different between the chips, so set the correct indices used for each scan type after identifying the chip. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/Makefile b/drivers/net/wireless/ti/wl12xx/Makefile index da509aa..8d9afd2 100644 --- a/drivers/net/wireless/ti/wl12xx/Makefile +++ b/drivers/net/wireless/ti/wl12xx/Makefile @@ -1,3 +1,3 @@ -wl12xx-objs = main.o cmd.o acx.o debugfs.o +wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 6c9fba4..ada7031 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -38,6 +38,7 @@ #include "reg.h" #include "cmd.h" #include "acx.h" +#include "scan.h" #include "debugfs.h" static char *fref_param; @@ -698,6 +699,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) goto out; } + /* common settings */ + wl->scan_templ_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY; + wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY; + wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; + wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; out: return ret; } @@ -1618,6 +1624,11 @@ static struct wlcore_ops wl12xx_ops = { .set_rx_csum = NULL, .ap_get_mimo_wide_rate_mask = NULL, .debugfs_init = wl12xx_debugfs_add_files, + .scan_start = wl12xx_scan_start, + .scan_stop = wl12xx_scan_stop, + .scan_completed = wl12xx_scan_completed, + .sched_scan_start = wl12xx_sched_scan_start, + .sched_scan_stop = wl12xx_scan_sched_scan_stop, .get_spare_blocks = wl12xx_get_spare_blocks, .set_key = wl12xx_set_key, .pre_pkt_send = NULL, diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c new file mode 100644 index 0000000..a99e876 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -0,0 +1,500 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include "scan.h" +#include "../wlcore/debug.h" +#include "../wlcore/tx.h" + +static int wl1271_get_scan_channels(struct wl1271 *wl, + struct cfg80211_scan_request *req, + struct basic_scan_channel_params *channels, + enum ieee80211_band band, bool passive) +{ + struct conf_scan_settings *c = &wl->conf.scan; + int i, j; + u32 flags; + + for (i = 0, j = 0; + i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; + i++) { + flags = req->channels[i]->flags; + + if (!test_bit(i, wl->scan.scanned_ch) && + !(flags & IEEE80211_CHAN_DISABLED) && + (req->channels[i]->band == band) && + /* + * In passive scans, we scan all remaining + * channels, even if not marked as such. + * In active scans, we only scan channels not + * marked as passive. + */ + (passive || !(flags & IEEE80211_CHAN_PASSIVE_SCAN))) { + wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", + req->channels[i]->band, + req->channels[i]->center_freq); + wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", + req->channels[i]->hw_value, + req->channels[i]->flags); + wl1271_debug(DEBUG_SCAN, + "max_antenna_gain %d, max_power %d", + req->channels[i]->max_antenna_gain, + req->channels[i]->max_power); + wl1271_debug(DEBUG_SCAN, "beacon_found %d", + req->channels[i]->beacon_found); + + if (!passive) { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_active); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_active); + } else { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_passive); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_passive); + } + channels[j].early_termination = 0; + channels[j].tx_power_att = req->channels[i]->max_power; + channels[j].channel = req->channels[i]->hw_value; + + memset(&channels[j].bssid_lsb, 0xff, 4); + memset(&channels[j].bssid_msb, 0xff, 2); + + /* Mark the channels we already used */ + set_bit(i, wl->scan.scanned_ch); + + j++; + } + } + + return j; +} + +#define WL1271_NOTHING_TO_SCAN 1 + +static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, + enum ieee80211_band band, + bool passive, u32 basic_rate) +{ + struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct wl1271_cmd_scan *cmd; + struct wl1271_cmd_trigger_scan_to *trigger; + int ret; + u16 scan_options = 0; + + /* skip active scans if we don't have SSIDs */ + if (!passive && wl->scan.req->n_ssids == 0) + return WL1271_NOTHING_TO_SCAN; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); + if (!cmd || !trigger) { + ret = -ENOMEM; + goto out; + } + + if (wl->conf.scan.split_scan_timeout) + scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; + + if (passive) + scan_options |= WL1271_SCAN_OPT_PASSIVE; + + cmd->params.role_id = wlvif->role_id; + + if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->params.scan_options = cpu_to_le16(scan_options); + + cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, + cmd->channels, + band, passive); + if (cmd->params.n_ch == 0) { + ret = WL1271_NOTHING_TO_SCAN; + goto out; + } + + cmd->params.tx_rate = cpu_to_le32(basic_rate); + cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; + cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; + + if (band == IEEE80211_BAND_2GHZ) + cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; + else + cmd->params.band = WL1271_SCAN_BAND_5_GHZ; + + if (wl->scan.ssid_len && wl->scan.ssid) { + cmd->params.ssid_len = wl->scan.ssid_len; + memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); + } + + memcpy(cmd->addr, vif->addr, ETH_ALEN); + + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->params.role_id, band, + wl->scan.ssid, wl->scan.ssid_len, + wl->scan.req->ie, + wl->scan.req->ie_len, false); + if (ret < 0) { + wl1271_error("PROBE request template failed"); + goto out; + } + + trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); + ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, + sizeof(*trigger), 0); + if (ret < 0) { + wl1271_error("trigger scan to failed for hw scan"); + goto out; + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd); + kfree(trigger); + return ret; +} + +int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_header *cmd = NULL; + int ret = 0; + + if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) + return -EINVAL; + + wl1271_debug(DEBUG_CMD, "cmd scan stop"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, + sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("cmd stop_scan failed"); + goto out; + } +out: + kfree(cmd); + return ret; +} + +void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + int ret = 0; + enum ieee80211_band band; + u32 rate, mask; + + switch (wl->scan.state) { + case WL1271_SCAN_STATE_IDLE: + break; + + case WL1271_SCAN_STATE_2GHZ_ACTIVE: + band = IEEE80211_BAND_2GHZ; + mask = wlvif->bitrate_masks[band]; + if (wl->scan.req->no_cck) { + mask &= ~CONF_TX_CCK_RATES; + if (!mask) + mask = CONF_TX_RATE_MASK_BASIC_P2P; + } + rate = wl1271_tx_min_rate_get(wl, mask); + ret = wl1271_scan_send(wl, wlvif, band, false, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_2GHZ_PASSIVE: + band = IEEE80211_BAND_2GHZ; + mask = wlvif->bitrate_masks[band]; + if (wl->scan.req->no_cck) { + mask &= ~CONF_TX_CCK_RATES; + if (!mask) + mask = CONF_TX_RATE_MASK_BASIC_P2P; + } + rate = wl1271_tx_min_rate_get(wl, mask); + ret = wl1271_scan_send(wl, wlvif, band, true, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + if (wl->enable_11a) + wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; + else + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_ACTIVE: + band = IEEE80211_BAND_5GHZ; + rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); + ret = wl1271_scan_send(wl, wlvif, band, false, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_PASSIVE: + band = IEEE80211_BAND_5GHZ; + rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); + ret = wl1271_scan_send(wl, wlvif, band, true, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_DONE: + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + break; + + default: + wl1271_error("invalid scan state"); + break; + } + + if (ret < 0) { + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + } +} + +static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, + struct wlcore_scan_channels *cmd_channels) +{ + memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); + memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); + cmd->dfs = cmd_channels->dfs; + cmd->n_pactive_ch = cmd_channels->passive_active; + + memcpy(cmd->channels_2, cmd_channels->channels_2, + sizeof(cmd->channels_2)); + memcpy(cmd->channels_5, cmd_channels->channels_5, + sizeof(cmd->channels_2)); + /* channels_4 are not supported, so no need to copy them */ +} + +int wl1271_scan_sched_scan_config(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + struct wl1271_cmd_sched_scan_config *cfg = NULL; + struct wlcore_scan_channels *cfg_channels = NULL; + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + int i, ret; + bool force_passive = !req->n_ssids; + + wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->role_id = wlvif->role_id; + cfg->rssi_threshold = c->rssi_threshold; + cfg->snr_threshold = c->snr_threshold; + cfg->n_probe_reqs = c->num_probe_reqs; + /* cycles set to 0 it means infinite (until manually stopped) */ + cfg->cycles = 0; + /* report APs when at least 1 is found */ + cfg->report_after = 1; + /* don't stop scanning automatically when something is found */ + cfg->terminate = 0; + cfg->tag = WL1271_SCAN_DEFAULT_TAG; + /* don't filter on BSS type */ + cfg->bss_type = SCAN_BSS_TYPE_ANY; + /* currently NL80211 supports only a single interval */ + for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) + cfg->intervals[i] = cpu_to_le32(req->interval); + + cfg->ssid_len = 0; + ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); + if (ret < 0) + goto out; + + cfg->filter_type = ret; + + wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); + + cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL); + if (!cfg_channels) { + ret = -ENOMEM; + goto out; + } + + if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, + req->n_channels, req->n_ssids)) { + wl1271_error("scan channel list is empty"); + ret = -EINVAL; + goto out; + } + wl12xx_adjust_channels(cfg, cfg_channels); + + if (!force_passive && cfg->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + wlvif->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], true); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (!force_passive && cfg->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + wlvif->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], true); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); + + ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, + sizeof(*cfg), 0); + if (ret < 0) { + wl1271_error("SCAN configuration failed"); + goto out; + } +out: + kfree(cfg_channels); + kfree(cfg); + return ret; +} + +int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_sched_scan_start *start; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); + + if (wlvif->bss_type != BSS_TYPE_STA_BSS) + return -EOPNOTSUPP; + + if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && + test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) + return -EBUSY; + + start = kzalloc(sizeof(*start), GFP_KERNEL); + if (!start) + return -ENOMEM; + + start->role_id = wlvif->role_id; + start->tag = WL1271_SCAN_DEFAULT_TAG; + + ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, + sizeof(*start), 0); + if (ret < 0) { + wl1271_error("failed to send scan start command"); + goto out_free; + } + +out_free: + kfree(start); + return ret; +} + +int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + int ret; + + ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); + if (ret < 0) + return ret; + + return wl1271_scan_sched_scan_start(wl, wlvif); +} + +void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_sched_scan_stop *stop; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); + + /* FIXME: what to do if alloc'ing to stop fails? */ + stop = kzalloc(sizeof(*stop), GFP_KERNEL); + if (!stop) { + wl1271_error("failed to alloc memory to send sched scan stop"); + return; + } + + stop->role_id = wlvif->role_id; + stop->tag = WL1271_SCAN_DEFAULT_TAG; + + ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, + sizeof(*stop), 0); + if (ret < 0) { + wl1271_error("failed to send sched scan stop command"); + goto out_free; + } + +out_free: + kfree(stop); +} + +int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + wl1271_scan_stm(wl, wlvif); + return 0; +} + +void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + wl1271_scan_stm(wl, wlvif); +} diff --git a/drivers/net/wireless/ti/wl12xx/scan.h b/drivers/net/wireless/ti/wl12xx/scan.h new file mode 100644 index 0000000..bd075de --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/scan.h @@ -0,0 +1,138 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_SCAN_H__ +#define __WL12XX_SCAN_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/scan.h" + +struct basic_scan_params { + /* Scan option flags (WL1271_SCAN_OPT_*) */ + __le16 scan_options; + u8 role_id; + /* Number of scan channels in the list (maximum 30) */ + u8 n_ch; + /* This field indicates the number of probe requests to send + per channel for an active scan */ + u8 n_probe_reqs; + u8 tid_trigger; + u8 ssid_len; + u8 use_ssid_list; + + /* Rate bit field for sending the probes */ + __le32 tx_rate; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + /* Band to scan */ + u8 band; + + u8 scan_tag; + u8 padding2[2]; +} __packed; + +struct basic_scan_channel_params { + /* Duration in TU to wait for frames on a channel for active scan */ + __le32 min_duration; + __le32 max_duration; + __le32 bssid_lsb; + __le16 bssid_msb; + u8 early_termination; + u8 tx_power_att; + u8 channel; + /* FW internal use only! */ + u8 dfs_candidate; + u8 activity_detected; + u8 pad; +} __packed; + +struct wl1271_cmd_scan { + struct wl1271_cmd_header header; + + struct basic_scan_params params; + struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; + + /* src mac address */ + u8 addr[ETH_ALEN]; + u8 padding[2]; +} __packed; + +struct wl1271_cmd_sched_scan_config { + struct wl1271_cmd_header header; + + __le32 intervals[SCAN_MAX_CYCLE_INTERVALS]; + + s8 rssi_threshold; /* for filtering (in dBm) */ + s8 snr_threshold; /* for filtering (in dB) */ + + u8 cycles; /* maximum number of scan cycles */ + u8 report_after; /* report when this number of results are received */ + u8 terminate; /* stop scanning after reporting */ + + u8 tag; + u8 bss_type; /* for filtering */ + u8 filter_type; + + u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ + u8 ssid[IEEE80211_MAX_SSID_LEN]; + + u8 n_probe_reqs; /* Number of probes requests per channel */ + + u8 passive[SCAN_MAX_BANDS]; + u8 active[SCAN_MAX_BANDS]; + + u8 dfs; + + u8 n_pactive_ch; /* number of pactive (passive until fw detects energy) + channels in BG band */ + u8 role_id; + u8 padding[1]; + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; +} __packed; + +struct wl1271_cmd_sched_scan_start { + struct wl1271_cmd_header header; + + u8 tag; + u8 role_id; + u8 padding[2]; +} __packed; + +struct wl1271_cmd_sched_scan_stop { + struct wl1271_cmd_header header; + + u8 tag; + u8 role_id; + u8 padding[2]; +} __packed; + +int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); +int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); +void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile index 67c0987..f742249 100644 --- a/drivers/net/wireless/ti/wl18xx/Makefile +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -1,3 +1,3 @@ -wl18xx-objs = main.o acx.o tx.o io.o debugfs.o +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 8ba1c93..97c23c8 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -38,6 +38,7 @@ #include "tx.h" #include "wl18xx.h" #include "io.h" +#include "scan.h" #include "debugfs.h" #define WL18XX_RX_CHECKSUM_MASK 0x40 @@ -612,7 +613,8 @@ static int wl18xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | - WLCORE_QUIRK_TX_PAD_LAST_FRAME; + WLCORE_QUIRK_TX_PAD_LAST_FRAME | + WLCORE_QUIRK_DUAL_PROBE_TMPL; wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER, WL18XX_SUBTYPE_VER, @@ -630,6 +632,10 @@ static int wl18xx_identify_chip(struct wl1271 *wl) goto out; } + wl->scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; + wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC; + wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC; out: return ret; } @@ -1320,6 +1326,11 @@ static struct wlcore_ops wl18xx_ops = { .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask, .get_mac = wl18xx_get_mac, .debugfs_init = wl18xx_debugfs_add_files, + .scan_start = wl18xx_scan_start, + .scan_stop = wl18xx_scan_stop, + .scan_completed = wl18xx_scan_completed, + .sched_scan_start = wl18xx_sched_scan_start, + .sched_scan_stop = wl18xx_scan_sched_scan_stop, .handle_static_data = wl18xx_handle_static_data, .get_spare_blocks = wl18xx_get_spare_blocks, .set_key = wl18xx_set_key, diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c new file mode 100644 index 0000000..f31d0d4 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -0,0 +1,320 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include "scan.h" +#include "../wlcore/debug.h" + +static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd, + struct wlcore_scan_channels *cmd_channels) +{ + memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); + memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); + cmd->dfs = cmd_channels->dfs; + cmd->passive_active = cmd_channels->passive_active; + + memcpy(cmd->channels_2, cmd_channels->channels_2, + sizeof(cmd->channels_2)); + memcpy(cmd->channels_5, cmd_channels->channels_5, + sizeof(cmd->channels_2)); + /* channels_4 are not supported, so no need to copy them */ +} + +static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + struct wl18xx_cmd_scan_params *cmd; + struct wlcore_scan_channels *cmd_channels = NULL; + int ret; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + + if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->scan_type = SCAN_TYPE_SEARCH; + cmd->rssi_threshold = -127; + cmd->snr_threshold = 0; + + cmd->bss_type = SCAN_BSS_TYPE_ANY; + + cmd->ssid_from_list = 0; + cmd->filter = 0; + cmd->add_broadcast = 0; + + cmd->urgency = 0; + cmd->protect = 0; + + cmd->n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->terminate_after = 0; + + /* configure channels */ + WARN_ON(req->n_ssids > 1); + + cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL); + if (!cmd_channels) { + ret = -ENOMEM; + goto out; + } + + wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, + req->n_channels, req->n_ssids); + wl18xx_adjust_channels(cmd, cmd_channels); + + /* + * all the cycles params (except total cycles) should + * remain 0 for normal scan + */ + cmd->total_cycles = 1; + + if (req->no_cck) + cmd->rate = WL18XX_SCAN_RATE_6; + + cmd->tag = WL1271_SCAN_DEFAULT_TAG; + + if (req->n_ssids) { + cmd->ssid_len = req->ssids[0].ssid_len; + memcpy(cmd->ssid, req->ssids[0].ssid, cmd->ssid_len); + } + + /* TODO: per-band ies? */ + if (cmd->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + req->ie, + req->ie_len, + false); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (cmd->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + req->ie, + req->ie_len, + false); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd_channels); + kfree(cmd); + return ret; +} + +void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); +} + +static +int wl18xx_scan_sched_scan_config(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + struct wl18xx_cmd_scan_params *cmd; + struct wlcore_scan_channels *cmd_channels = NULL; + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + int ret; + int filter_type; + + wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); + + filter_type = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); + if (filter_type < 0) + return filter_type; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + + if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->scan_type = SCAN_TYPE_PERIODIC; + cmd->rssi_threshold = c->rssi_threshold; + cmd->snr_threshold = c->snr_threshold; + + /* don't filter on BSS type */ + cmd->bss_type = SCAN_BSS_TYPE_ANY; + + cmd->ssid_from_list = 1; + if (filter_type == SCAN_SSID_FILTER_LIST) + cmd->filter = 1; + cmd->add_broadcast = 0; + + cmd->urgency = 0; + cmd->protect = 0; + + cmd->n_probe_reqs = c->num_probe_reqs; + /* don't stop scanning automatically when something is found */ + cmd->terminate_after = 0; + + cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL); + if (!cmd_channels) { + ret = -ENOMEM; + goto out; + } + + /* configure channels */ + wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, + req->n_channels, req->n_ssids); + wl18xx_adjust_channels(cmd, cmd_channels); + + cmd->short_cycles_sec = 0; + cmd->long_cycles_sec = cpu_to_le16(req->interval); + cmd->short_cycles_count = 0; + + cmd->total_cycles = 0; + + cmd->tag = WL1271_SCAN_DEFAULT_TAG; + + if (cmd->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], + true); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (cmd->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], + true); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd_channels); + kfree(cmd); + return ret; +} + +int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + return wl18xx_scan_sched_scan_config(wl, wlvif, req, ies); +} + +static int __wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 scan_type) +{ + struct wl18xx_cmd_scan_stop *stop; + int ret; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); + + stop = kzalloc(sizeof(*stop), GFP_KERNEL); + if (!stop) { + wl1271_error("failed to alloc memory to send sched scan stop"); + return -ENOMEM; + } + + stop->role_id = wlvif->role_id; + stop->scan_type = scan_type; + + ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, stop, sizeof(*stop), 0); + if (ret < 0) { + wl1271_error("failed to send sched scan stop command"); + goto out_free; + } + +out_free: + kfree(stop); + return ret; +} + +void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_PERIODIC); +} +int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + return wl18xx_scan_send(wl, wlvif, req); +} + +int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + return __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_SEARCH); +} diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h new file mode 100644 index 0000000..404baf1 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -0,0 +1,120 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_SCAN_H__ +#define __WL18XX_SCAN_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/scan.h" + +struct tracking_ch_params { + struct conn_scan_ch_params channel; + + __le32 bssid_lsb; + __le16 bssid_msb; + + u8 padding[2]; +} __packed; + +enum +{ + SCAN_TYPE_SEARCH = 0, + SCAN_TYPE_PERIODIC = 1, + SCAN_TYPE_TRACKING = 2, +}; + +/* probe request rate */ +enum +{ + WL18XX_SCAN_RATE_1 = 0, + WL18XX_SCAN_RATE_5_5 = 1, + WL18XX_SCAN_RATE_6 = 2, +}; + +struct wl18xx_cmd_scan_params { + struct wl1271_cmd_header header; + + u8 role_id; + u8 scan_type; + + s8 rssi_threshold; /* for filtering (in dBm) */ + s8 snr_threshold; /* for filtering (in dB) */ + + u8 bss_type; /* for filtering */ + u8 ssid_from_list; /* use ssid from configured ssid list */ + u8 filter; /* forward only results with matching ssids */ + + /* + * add broadcast ssid in addition to the configured ssids. + * the driver should add dummy entry for it (?). + */ + u8 add_broadcast; + + u8 urgency; + u8 protect; /* ??? */ + u8 n_probe_reqs; /* Number of probes requests per channel */ + u8 terminate_after; /* early terminate scan operation */ + + u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */ + u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */ + u8 dfs; /* number of dfs channels in 5ghz */ + u8 passive_active; /* number of passive before active channels 2.4ghz */ + + __le16 short_cycles_sec; + __le16 long_cycles_sec; + u8 short_cycles_count; + u8 total_cycles; /* 0 - infinite */ + u8 rate; + u8 padding[1]; + + union { + struct { + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; + }; + struct tracking_ch_params channels_tracking[WL1271_SCAN_MAX_CHANNELS]; + } ; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ + u8 tag; + u8 padding1[2]; +} __packed; + +struct wl18xx_cmd_scan_stop { + struct wl1271_cmd_header header; + + u8 role_id; + u8 scan_type; + u8 padding[2]; +} __packed; + +int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); +int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); +void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 04ba86d..c8c7766 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -131,6 +131,7 @@ fail: wl12xx_queue_recovery_work(wl); return ret; } +EXPORT_SYMBOL_GPL(wl1271_cmd_send); /* * Poll the mailbox event field until any of the bits in the mask is set or a @@ -1049,8 +1050,8 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct sk_buff *skb; int ret; u32 rate; - u16 template_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; - u16 template_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + u16 template_id_2_4 = wl->scan_templ_id_2_4; + u16 template_id_5 = wl->scan_templ_id_5; skb = ieee80211_probereq_get(wl->hw, vif, ssid, ssid_len, ie, ie_len); @@ -1061,10 +1062,10 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len); - if (!sched_scan && + if (sched_scan && (wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL)) { - template_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4; - template_id_5 = CMD_TEMPL_APP_PROBE_REQ_5; + template_id_2_4 = wl->sched_scan_templ_id_2_4; + template_id_5 = wl->sched_scan_templ_id_5; } rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); @@ -1081,6 +1082,7 @@ out: dev_kfree_skb(skb); return ret; } +EXPORT_SYMBOL_GPL(wl12xx_cmd_build_probe_req); struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index d021305..9e9062f 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -172,8 +172,8 @@ enum cmd_templ { CMD_TEMPL_PS_POLL, CMD_TEMPL_KLV, CMD_TEMPL_DISCONNECT, - CMD_TEMPL_APP_PROBE_REQ_2_4, - CMD_TEMPL_APP_PROBE_REQ_5, + CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY, + CMD_TEMPL_APP_PROBE_REQ_5_LEGACY, CMD_TEMPL_BAR, /* for firmware internal use only */ CMD_TEMPL_CTS, /* * For CTS-to-self (FastCTS) mechanism @@ -184,6 +184,8 @@ enum cmd_templ { CMD_TEMPL_DEAUTH_AP, CMD_TEMPL_TEMPORARY, CMD_TEMPL_LINK_MEASUREMENT_REPORT, + CMD_TEMPL_PROBE_REQ_2_4_PERIODIC, + CMD_TEMPL_PROBE_REQ_5_PERIODIC, CMD_TEMPL_MAX = 0xff }; diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index cf45aaf..d9353da 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -117,7 +117,9 @@ static int wl1271_event_process(struct wl1271 *wl) wl1271_debug(DEBUG_EVENT, "status: 0x%x", mbox->scheduled_scan_status); - wl1271_scan_stm(wl, wl->scan_vif); + if (wl->scan_vif) + wl->ops->scan_completed(wl, + wl12xx_vif_to_data(wl->scan_vif)); } if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 84641b3..06e1bf9 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -41,14 +41,14 @@ int wl1271_init_templates_config(struct wl1271 *wl) /* send empty templates for fw memory reservation */ ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL, + wl->scan_templ_id_2_4, NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) return ret; ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_CFG_PROBE_REQ_5, + wl->scan_templ_id_5, NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) @@ -56,14 +56,16 @@ int wl1271_init_templates_config(struct wl1271 *wl) if (wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL) { ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_APP_PROBE_REQ_2_4, NULL, + wl->sched_scan_templ_id_2_4, + NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) return ret; ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_APP_PROBE_REQ_5, NULL, + wl->sched_scan_templ_id_5, + NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 111b84f..0f7a933 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3252,7 +3252,7 @@ static int wl1271_op_hw_scan(struct ieee80211_hw *hw, goto out_sleep; } - ret = wl1271_scan(hw->priv, vif, ssid, len, req); + ret = wlcore_scan(hw->priv, vif, ssid, len, req); out_sleep: wl1271_ps_elp_sleep(wl); out: @@ -3265,6 +3265,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct wl1271 *wl = hw->priv; + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); int ret; wl1271_debug(DEBUG_MAC80211, "mac80211 cancel hw scan"); @@ -3282,7 +3283,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, goto out; if (wl->scan.state != WL1271_SCAN_STATE_DONE) { - ret = wl1271_scan_stop(wl); + ret = wl->ops->scan_stop(wl, wlvif); if (ret < 0) goto out_sleep; } @@ -3329,11 +3330,7 @@ static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw, if (ret < 0) goto out; - ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); - if (ret < 0) - goto out_sleep; - - ret = wl1271_scan_sched_scan_start(wl, wlvif); + ret = wl->ops->sched_scan_start(wl, wlvif, req, ies); if (ret < 0) goto out_sleep; @@ -3364,7 +3361,7 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw, if (ret < 0) goto out; - wl1271_scan_sched_scan_stop(wl, wlvif); + wl->ops->sched_scan_stop(wl, wlvif); wl1271_ps_elp_sleep(wl); out: @@ -3821,7 +3818,7 @@ static int wlcore_set_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif, /* we only support sched_scan while not connected */ if (wl->sched_scanning) - wl1271_scan_sched_scan_stop(wl, wlvif); + wl->ops->sched_scan_stop(wl, wlvif); ret = wl1271_acx_sta_rate_policies(wl, wlvif); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 22dd7e9..9eab64d 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -89,319 +89,6 @@ out: } - -static int wl1271_get_scan_channels(struct wl1271 *wl, - struct cfg80211_scan_request *req, - struct basic_scan_channel_params *channels, - enum ieee80211_band band, bool passive) -{ - struct conf_scan_settings *c = &wl->conf.scan; - int i, j; - u32 flags; - - for (i = 0, j = 0; - i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; - i++) { - flags = req->channels[i]->flags; - - if (!test_bit(i, wl->scan.scanned_ch) && - !(flags & IEEE80211_CHAN_DISABLED) && - (req->channels[i]->band == band) && - /* - * In passive scans, we scan all remaining - * channels, even if not marked as such. - * In active scans, we only scan channels not - * marked as passive. - */ - (passive || !(flags & IEEE80211_CHAN_PASSIVE_SCAN))) { - wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", - req->channels[i]->band, - req->channels[i]->center_freq); - wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", - req->channels[i]->hw_value, - req->channels[i]->flags); - wl1271_debug(DEBUG_SCAN, - "max_antenna_gain %d, max_power %d", - req->channels[i]->max_antenna_gain, - req->channels[i]->max_power); - wl1271_debug(DEBUG_SCAN, "beacon_found %d", - req->channels[i]->beacon_found); - - if (!passive) { - channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_active); - channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_active); - } else { - channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_passive); - channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_passive); - } - channels[j].early_termination = 0; - channels[j].tx_power_att = req->channels[i]->max_power; - channels[j].channel = req->channels[i]->hw_value; - - memset(&channels[j].bssid_lsb, 0xff, 4); - memset(&channels[j].bssid_msb, 0xff, 2); - - /* Mark the channels we already used */ - set_bit(i, wl->scan.scanned_ch); - - j++; - } - } - - return j; -} - -#define WL1271_NOTHING_TO_SCAN 1 - -static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif, - enum ieee80211_band band, - bool passive, u32 basic_rate) -{ - struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); - struct wl1271_cmd_scan *cmd; - struct wl1271_cmd_trigger_scan_to *trigger; - int ret; - u16 scan_options = 0; - - /* skip active scans if we don't have SSIDs */ - if (!passive && wl->scan.req->n_ssids == 0) - return WL1271_NOTHING_TO_SCAN; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); - if (!cmd || !trigger) { - ret = -ENOMEM; - goto out; - } - - if (wl->conf.scan.split_scan_timeout) - scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; - - if (passive) - scan_options |= WL1271_SCAN_OPT_PASSIVE; - - cmd->params.role_id = wlvif->role_id; - - if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { - ret = -EINVAL; - goto out; - } - - cmd->params.scan_options = cpu_to_le16(scan_options); - - cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, - cmd->channels, - band, passive); - if (cmd->params.n_ch == 0) { - ret = WL1271_NOTHING_TO_SCAN; - goto out; - } - - cmd->params.tx_rate = cpu_to_le32(basic_rate); - cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; - cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; - cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; - - if (band == IEEE80211_BAND_2GHZ) - cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; - else - cmd->params.band = WL1271_SCAN_BAND_5_GHZ; - - if (wl->scan.ssid_len && wl->scan.ssid) { - cmd->params.ssid_len = wl->scan.ssid_len; - memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); - } - - memcpy(cmd->addr, vif->addr, ETH_ALEN); - - ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->params.role_id, band, - wl->scan.ssid, wl->scan.ssid_len, - wl->scan.req->ie, - wl->scan.req->ie_len, false); - if (ret < 0) { - wl1271_error("PROBE request template failed"); - goto out; - } - - trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); - ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, - sizeof(*trigger), 0); - if (ret < 0) { - wl1271_error("trigger scan to failed for hw scan"); - goto out; - } - - wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); - - ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("SCAN failed"); - goto out; - } - -out: - kfree(cmd); - kfree(trigger); - return ret; -} - -void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif) -{ - struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); - int ret = 0; - enum ieee80211_band band; - u32 rate, mask; - - switch (wl->scan.state) { - case WL1271_SCAN_STATE_IDLE: - break; - - case WL1271_SCAN_STATE_2GHZ_ACTIVE: - band = IEEE80211_BAND_2GHZ; - mask = wlvif->bitrate_masks[band]; - if (wl->scan.req->no_cck) { - mask &= ~CONF_TX_CCK_RATES; - if (!mask) - mask = CONF_TX_RATE_MASK_BASIC_P2P; - } - rate = wl1271_tx_min_rate_get(wl, mask); - ret = wl1271_scan_send(wl, vif, band, false, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_2GHZ_PASSIVE: - band = IEEE80211_BAND_2GHZ; - mask = wlvif->bitrate_masks[band]; - if (wl->scan.req->no_cck) { - mask &= ~CONF_TX_CCK_RATES; - if (!mask) - mask = CONF_TX_RATE_MASK_BASIC_P2P; - } - rate = wl1271_tx_min_rate_get(wl, mask); - ret = wl1271_scan_send(wl, vif, band, true, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - if (wl->enable_11a) - wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; - else - wl->scan.state = WL1271_SCAN_STATE_DONE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_5GHZ_ACTIVE: - band = IEEE80211_BAND_5GHZ; - rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); - ret = wl1271_scan_send(wl, vif, band, false, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_5GHZ_PASSIVE: - band = IEEE80211_BAND_5GHZ; - rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); - ret = wl1271_scan_send(wl, vif, band, true, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_DONE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_DONE: - wl->scan.failed = false; - cancel_delayed_work(&wl->scan_complete_work); - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(0)); - break; - - default: - wl1271_error("invalid scan state"); - break; - } - - if (ret < 0) { - cancel_delayed_work(&wl->scan_complete_work); - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(0)); - } -} - -int wl1271_scan(struct wl1271 *wl, struct ieee80211_vif *vif, - const u8 *ssid, size_t ssid_len, - struct cfg80211_scan_request *req) -{ - /* - * cfg80211 should guarantee that we don't get more channels - * than what we have registered. - */ - BUG_ON(req->n_channels > WL1271_MAX_CHANNELS); - - if (wl->scan.state != WL1271_SCAN_STATE_IDLE) - return -EBUSY; - - wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; - - if (ssid_len && ssid) { - wl->scan.ssid_len = ssid_len; - memcpy(wl->scan.ssid, ssid, ssid_len); - } else { - wl->scan.ssid_len = 0; - } - - wl->scan_vif = vif; - wl->scan.req = req; - memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); - - /* we assume failure so that timeout scenarios are handled correctly */ - wl->scan.failed = true; - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); - - wl1271_scan_stm(wl, vif); - - return 0; -} - -int wl1271_scan_stop(struct wl1271 *wl) -{ - struct wl1271_cmd_header *cmd = NULL; - int ret = 0; - - if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) - return -EINVAL; - - wl1271_debug(DEBUG_CMD, "cmd scan stop"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, - sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("cmd stop_scan failed"); - goto out; - } -out: - kfree(cmd); - return ret; -} - static int wlcore_scan_get_channels(struct wl1271 *wl, struct ieee80211_channel *req_channels[], @@ -503,9 +190,9 @@ wlcore_scan_get_channels(struct wl1271 *wl, return j - start; } -static bool +bool wlcore_set_scan_chan_params(struct wl1271 *wl, - struct wl1271_cmd_sched_scan_config *cfg, + struct wlcore_scan_channels *cfg, struct ieee80211_channel *channels[], u32 n_channels, u32 n_ssids) @@ -570,7 +257,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, cfg->passive[2] = 0; cfg->active[2] = 0; - cfg->n_pactive_ch = n_pactive_ch; + cfg->passive_active = n_pactive_ch; wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); @@ -582,10 +269,48 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, cfg->passive[1] || cfg->active[1] || cfg->dfs || cfg->passive[2] || cfg->active[2]; } +EXPORT_SYMBOL_GPL(wlcore_set_scan_chan_params); +int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, + const u8 *ssid, size_t ssid_len, + struct cfg80211_scan_request *req) +{ + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + + /* + * cfg80211 should guarantee that we don't get more channels + * than what we have registered. + */ + BUG_ON(req->n_channels > WL1271_MAX_CHANNELS); + + if (wl->scan.state != WL1271_SCAN_STATE_IDLE) + return -EBUSY; + + wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; + + if (ssid_len && ssid) { + wl->scan.ssid_len = ssid_len; + memcpy(wl->scan.ssid, ssid, ssid_len); + } else { + wl->scan.ssid_len = 0; + } + + wl->scan_vif = vif; + wl->scan.req = req; + memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); + + /* we assume failure so that timeout scenarios are handled correctly */ + wl->scan.failed = true; + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); + + wl->ops->scan_start(wl, wlvif, req); + + return 0; +} /* Returns the scan type to be used or a negative value on error */ -static int -wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl, +int +wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_sched_scan_request *req) { @@ -688,129 +413,7 @@ out: return ret; return type; } - -int wl1271_scan_sched_scan_config(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct cfg80211_sched_scan_request *req, - struct ieee80211_sched_scan_ies *ies) -{ - struct wl1271_cmd_sched_scan_config *cfg = NULL; - struct conf_sched_scan_settings *c = &wl->conf.sched_scan; - int i, ret; - bool force_passive = !req->n_ssids; - - wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); - - cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); - if (!cfg) - return -ENOMEM; - - cfg->role_id = wlvif->role_id; - cfg->rssi_threshold = c->rssi_threshold; - cfg->snr_threshold = c->snr_threshold; - cfg->n_probe_reqs = c->num_probe_reqs; - /* cycles set to 0 it means infinite (until manually stopped) */ - cfg->cycles = 0; - /* report APs when at least 1 is found */ - cfg->report_after = 1; - /* don't stop scanning automatically when something is found */ - cfg->terminate = 0; - cfg->tag = WL1271_SCAN_DEFAULT_TAG; - /* don't filter on BSS type */ - cfg->bss_type = SCAN_BSS_TYPE_ANY; - /* currently NL80211 supports only a single interval */ - for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) - cfg->intervals[i] = cpu_to_le32(req->interval); - - cfg->ssid_len = 0; - ret = wl12xx_scan_sched_scan_ssid_list(wl, wlvif, req); - if (ret < 0) - goto out; - - cfg->filter_type = ret; - - wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); - - if (!wlcore_set_scan_chan_params(wl, cfg, req->channels, - req->n_channels, req->n_ssids)) { - wl1271_error("scan channel list is empty"); - ret = -EINVAL; - goto out; - } - - if (!force_passive && cfg->active[0]) { - u8 band = IEEE80211_BAND_2GHZ; - ret = wl12xx_cmd_build_probe_req(wl, wlvif, - wlvif->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], true); - if (ret < 0) { - wl1271_error("2.4GHz PROBE request template failed"); - goto out; - } - } - - if (!force_passive && cfg->active[1]) { - u8 band = IEEE80211_BAND_5GHZ; - ret = wl12xx_cmd_build_probe_req(wl, wlvif, - wlvif->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], true); - if (ret < 0) { - wl1271_error("5GHz PROBE request template failed"); - goto out; - } - } - - wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); - - ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, - sizeof(*cfg), 0); - if (ret < 0) { - wl1271_error("SCAN configuration failed"); - goto out; - } -out: - kfree(cfg); - return ret; -} - -int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) -{ - struct wl1271_cmd_sched_scan_start *start; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); - - if (wlvif->bss_type != BSS_TYPE_STA_BSS) - return -EOPNOTSUPP; - - if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && - test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) - return -EBUSY; - - start = kzalloc(sizeof(*start), GFP_KERNEL); - if (!start) - return -ENOMEM; - - start->role_id = wlvif->role_id; - start->tag = WL1271_SCAN_DEFAULT_TAG; - - ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, - sizeof(*start), 0); - if (ret < 0) { - wl1271_error("failed to send scan start command"); - goto out_free; - } - -out_free: - kfree(start); - return ret; -} +EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_ssid_list); void wl1271_scan_sched_scan_results(struct wl1271 *wl) { @@ -818,31 +421,3 @@ void wl1271_scan_sched_scan_results(struct wl1271 *wl) ieee80211_sched_scan_results(wl->hw); } - -void wl1271_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) -{ - struct wl1271_cmd_sched_scan_stop *stop; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); - - /* FIXME: what to do if alloc'ing to stop fails? */ - stop = kzalloc(sizeof(*stop), GFP_KERNEL); - if (!stop) { - wl1271_error("failed to alloc memory to send sched scan stop"); - return; - } - - stop->role_id = wlvif->role_id; - stop->tag = WL1271_SCAN_DEFAULT_TAG; - - ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, - sizeof(*stop), 0); - if (ret < 0) { - wl1271_error("failed to send sched scan stop command"); - goto out_free; - } - -out_free: - kfree(stop); -} diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 29f3c8d6..25b0422 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -26,21 +26,19 @@ #include "wlcore.h" -int wl1271_scan(struct wl1271 *wl, struct ieee80211_vif *vif, +int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, const u8 *ssid, size_t ssid_len, struct cfg80211_scan_request *req); -int wl1271_scan_stop(struct wl1271 *wl); int wl1271_scan_build_probe_req(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, u8 band); -void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif); +void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif); void wl1271_scan_complete_work(struct work_struct *work); int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif); -void wl1271_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); void wl1271_scan_sched_scan_results(struct wl1271 *wl); #define WL1271_SCAN_MAX_CHANNELS 24 @@ -66,56 +64,6 @@ enum { WL1271_SCAN_STATE_DONE }; -struct basic_scan_params { - /* Scan option flags (WL1271_SCAN_OPT_*) */ - __le16 scan_options; - u8 role_id; - /* Number of scan channels in the list (maximum 30) */ - u8 n_ch; - /* This field indicates the number of probe requests to send - per channel for an active scan */ - u8 n_probe_reqs; - u8 tid_trigger; - u8 ssid_len; - u8 use_ssid_list; - - /* Rate bit field for sending the probes */ - __le32 tx_rate; - - u8 ssid[IEEE80211_MAX_SSID_LEN]; - /* Band to scan */ - u8 band; - - u8 scan_tag; - u8 padding2[2]; -} __packed; - -struct basic_scan_channel_params { - /* Duration in TU to wait for frames on a channel for active scan */ - __le32 min_duration; - __le32 max_duration; - __le32 bssid_lsb; - __le16 bssid_msb; - u8 early_termination; - u8 tx_power_att; - u8 channel; - /* FW internal use only! */ - u8 dfs_candidate; - u8 activity_detected; - u8 pad; -} __packed; - -struct wl1271_cmd_scan { - struct wl1271_cmd_header header; - - struct basic_scan_params params; - struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; - - /* src mac address */ - u8 addr[ETH_ALEN]; - u8 padding[2]; -} __packed; - struct wl1271_cmd_trigger_scan_to { struct wl1271_cmd_header header; @@ -160,43 +108,6 @@ struct conn_scan_ch_params { u8 padding[3]; } __packed; -struct wl1271_cmd_sched_scan_config { - struct wl1271_cmd_header header; - - __le32 intervals[SCAN_MAX_CYCLE_INTERVALS]; - - s8 rssi_threshold; /* for filtering (in dBm) */ - s8 snr_threshold; /* for filtering (in dB) */ - - u8 cycles; /* maximum number of scan cycles */ - u8 report_after; /* report when this number of results are received */ - u8 terminate; /* stop scanning after reporting */ - - u8 tag; - u8 bss_type; /* for filtering */ - u8 filter_type; - - u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ - u8 ssid[IEEE80211_MAX_SSID_LEN]; - - u8 n_probe_reqs; /* Number of probes requests per channel */ - - u8 passive[SCAN_MAX_BANDS]; - u8 active[SCAN_MAX_BANDS]; - - u8 dfs; - - u8 n_pactive_ch; /* number of pactive (passive until fw detects energy) - channels in BG band */ - u8 role_id; - u8 padding[1]; - - struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; - struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; - struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; -} __packed; - - #define SCHED_SCAN_MAX_SSIDS 16 enum { @@ -220,21 +131,27 @@ struct wl1271_cmd_sched_scan_ssid_list { u8 padding[2]; } __packed; -struct wl1271_cmd_sched_scan_start { - struct wl1271_cmd_header header; +struct wlcore_scan_channels { + u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */ + u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */ + u8 dfs; /* number of dfs channels in 5ghz */ + u8 passive_active; /* number of passive before active channels 2.4ghz */ - u8 tag; - u8 role_id; - u8 padding[2]; -} __packed; - -struct wl1271_cmd_sched_scan_stop { - struct wl1271_cmd_header header; - - u8 tag; - u8 role_id; - u8 padding[2]; -} __packed; + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; +}; +bool +wlcore_set_scan_chan_params(struct wl1271 *wl, + struct wlcore_scan_channels *cfg, + struct ieee80211_channel *channels[], + u32 n_channels, + u32 n_ssids); + +int +wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req); #endif /* __WL1271_SCAN_H__ */ diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index cf6dbee..2844f30 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -1135,6 +1135,7 @@ u32 wl1271_tx_min_rate_get(struct wl1271 *wl, u32 rate_set) return BIT(__ffs(rate_set)); } +EXPORT_SYMBOL_GPL(wl1271_tx_min_rate_get); void wlcore_stop_queue_locked(struct wl1271 *wl, u8 queue, enum wlcore_queue_stop_reason reason) diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index b636f1d..9f82ee3 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -82,6 +82,14 @@ struct wlcore_ops { int (*debugfs_init)(struct wl1271 *wl, struct dentry *rootdir); int (*handle_static_data)(struct wl1271 *wl, struct wl1271_static_data *static_data); + int (*scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); + int (*scan_stop)(struct wl1271 *wl, struct wl12xx_vif *wlvif); + void (*scan_completed)(struct wl1271 *wl, struct wl12xx_vif *wlvif); + int (*sched_scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); + void (*sched_scan_stop)(struct wl1271 *wl, struct wl12xx_vif *wlvif); int (*get_spare_blocks)(struct wl1271 *wl, bool is_gem); int (*set_key)(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_vif *vif, @@ -370,6 +378,11 @@ struct wl1271 { const char *sr_fw_name; const char *mr_fw_name; + u8 scan_templ_id_2_4; + u8 scan_templ_id_5; + u8 sched_scan_templ_id_2_4; + u8 sched_scan_templ_id_5; + /* per-chip-family private structure */ void *priv; -- cgit v0.10.2 From 0a1c720c63be74bbfe416fa085d0783348e4d69b Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:16 +0200 Subject: wl18xx: increase MAX_CHANNELS_5GHZ Some regdomains have more than 23 valid 5ghz channels, so 18xx's MAX_CHANNELS_5GHZ was increased to 32. Since now we have different max 5ghz channels values for wl12xx and wl18xx, add a new wl->max_channels_5ghz field, and use it for scan channels configuration. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index ada7031..0c81eeb 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -704,6 +704,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY; wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + wl->max_channels_5 = WL12XX_MAX_CHANNELS_5GHZ; out: return ret; } diff --git a/drivers/net/wireless/ti/wl12xx/scan.h b/drivers/net/wireless/ti/wl12xx/scan.h index bd075de..264af7a 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.h +++ b/drivers/net/wireless/ti/wl12xx/scan.h @@ -26,6 +26,8 @@ #include "../wlcore/cmd.h" #include "../wlcore/scan.h" +#define WL12XX_MAX_CHANNELS_5GHZ 23 + struct basic_scan_params { /* Scan option flags (WL1271_SCAN_OPT_*) */ __le16 scan_options; @@ -107,7 +109,7 @@ struct wl1271_cmd_sched_scan_config { u8 role_id; u8 padding[1]; struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; - struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_5[WL12XX_MAX_CHANNELS_5GHZ]; struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; } __packed; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 97c23c8..e81b351 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -636,6 +636,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl) wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC; wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC; + wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ; out: return ret; } diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h index 404baf1..0e026ec 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.h +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -50,6 +50,8 @@ enum WL18XX_SCAN_RATE_6 = 2, }; +#define WL18XX_MAX_CHANNELS_5GHZ 32 + struct wl18xx_cmd_scan_params { struct wl1271_cmd_header header; @@ -89,7 +91,7 @@ struct wl18xx_cmd_scan_params { union { struct { struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; - struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_5[WL18XX_MAX_CHANNELS_5GHZ]; struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; }; struct tracking_ch_params channels_tracking[WL1271_SCAN_MAX_CHANNELS]; diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 9eab64d..e7d0a02 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -228,7 +228,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, cfg->channels_5, IEEE80211_BAND_5GHZ, false, true, 0, - MAX_CHANNELS_5GHZ, + wl->max_channels_5, &n_pactive_ch); cfg->dfs = wlcore_scan_get_channels(wl, @@ -239,7 +239,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_5GHZ, true, true, cfg->passive[1], - MAX_CHANNELS_5GHZ, + wl->max_channels_5, &n_pactive_ch); cfg->active[1] = wlcore_scan_get_channels(wl, @@ -250,7 +250,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_5GHZ, false, false, cfg->passive[1] + cfg->dfs, - MAX_CHANNELS_5GHZ, + wl->max_channels_5, &n_pactive_ch); /* 802.11j channels are not supported yet */ diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 25b0422..8465f35 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -71,9 +71,17 @@ struct wl1271_cmd_trigger_scan_to { } __packed; #define MAX_CHANNELS_2GHZ 14 -#define MAX_CHANNELS_5GHZ 23 #define MAX_CHANNELS_4GHZ 4 +/* + * This max value here is used only for the struct definition of + * wlcore_scan_channels. This struct is used by both 12xx + * and 18xx (which have different max 5ghz channels value). + * In order to make sure this is large enough, just use the + * max possible 5ghz channels. + */ +#define MAX_CHANNELS_5GHZ 42 + #define SCAN_MAX_CYCLE_INTERVALS 16 #define SCAN_MAX_BANDS 3 diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 9f82ee3..36fde4e 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -382,6 +382,7 @@ struct wl1271 { u8 scan_templ_id_5; u8 sched_scan_templ_id_2_4; u8 sched_scan_templ_id_5; + u8 max_channels_5; /* per-chip-family private structure */ void *priv; -- cgit v0.10.2 From b6acb4e00e187cb5ae8dd479958a02fe0ea97bf0 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:17 +0200 Subject: wlcore: update acx enum update the acx enum to the new fw api. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c index 72840e2..adff9cd 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.c +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -75,7 +75,7 @@ int wl18xx_acx_set_checksum_state(struct wl1271 *wl) acx->checksum_state = CHECKSUM_OFFLOAD_ENABLED; - ret = wl1271_cmd_configure(wl, ACX_CHECKSUM_CONFIG, acx, sizeof(*acx)); + ret = wl1271_cmd_configure(wl, ACX_CSUM_CONFIG, acx, sizeof(*acx)); if (ret < 0) { wl1271_warning("failed to set Tx checksum state: %d", ret); goto out; diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h index e2609a6..394d125 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.h +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -26,7 +26,13 @@ #include "../wlcore/acx.h" enum { - ACX_CLEAR_STATISTICS = 0x0047, + ACX_NS_IPV6_FILTER = 0x0050, + ACX_PEER_HT_OPERATION_MODE_CFG = 0x0051, + ACX_CSUM_CONFIG = 0x0052, + ACX_SIM_CONFIG = 0x0053, + ACX_CLEAR_STATISTICS = 0x0054, + ACX_AUTO_RX_STREAMING = 0x0055, + ACX_PEER_CAP = 0x0056 }; /* numbers of bits the length field takes (add 1 for the actual number) */ diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h index d03215d..126536c 100644 --- a/drivers/net/wireless/ti/wlcore/acx.h +++ b/drivers/net/wireless/ti/wlcore/acx.h @@ -1025,7 +1025,6 @@ enum { ACX_CONFIG_HANGOVER = 0x0042, ACX_FEATURE_CFG = 0x0043, ACX_PROTECTION_CFG = 0x0044, - ACX_CHECKSUM_CONFIG = 0x0045, }; -- cgit v0.10.2 From fcab189027cdd68df7f97474d1419aaa4a82130c Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:18 +0200 Subject: wlcore: update channel_switch/stop_channel_switch commands Some fields were added to the channel_switch and stop_channel_switch commands. Unfortunately, the new 18xx channel_switch struct is not backward compatible with the 12xx channel switch struct. Add a new channel_switch op to wlcore, and update the driver accordingly. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c index 6222062..7dc9f96 100644 --- a/drivers/net/wireless/ti/wl12xx/cmd.c +++ b/drivers/net/wireless/ti/wl12xx/cmd.c @@ -284,3 +284,40 @@ int wl128x_cmd_radio_parms(struct wl1271 *wl) kfree(radio_parms); return ret; } + +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl12xx_cmd_channel_switch *cmd; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->channel->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + /* FIXME: control from mac80211 in the future */ + /* Enable TX on the target channel */ + cmd->post_switch_tx_disable = 0; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); + +out: + return ret; +} diff --git a/drivers/net/wireless/ti/wl12xx/cmd.h b/drivers/net/wireless/ti/wl12xx/cmd.h index 140a0e8..32cbad5 100644 --- a/drivers/net/wireless/ti/wl12xx/cmd.h +++ b/drivers/net/wireless/ti/wl12xx/cmd.h @@ -103,10 +103,30 @@ struct wl1271_ext_radio_parms_cmd { u8 padding[3]; } __packed; +struct wl12xx_cmd_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + + /* The new serving channel */ + u8 channel; + /* Relative time of the serving channel switch in TBTT units */ + u8 switch_time; + /* Stop the role TX, should expect it after radar detection */ + u8 stop_tx; + /* The target channel tx status 1-stopped 0-open*/ + u8 post_switch_tx_disable; + + u8 padding[3]; +} __packed; + int wl1271_cmd_general_parms(struct wl1271 *wl); int wl128x_cmd_general_parms(struct wl1271 *wl); int wl1271_cmd_radio_parms(struct wl1271 *wl); int wl128x_cmd_radio_parms(struct wl1271 *wl); int wl1271_cmd_ext_radio_parms(struct wl1271 *wl); +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); #endif /* __WL12XX_CMD_H__ */ diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 0c81eeb..b93de04 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1632,6 +1632,7 @@ static struct wlcore_ops wl12xx_ops = { .sched_scan_stop = wl12xx_scan_sched_scan_stop, .get_spare_blocks = wl12xx_get_spare_blocks, .set_key = wl12xx_set_key, + .channel_switch = wl12xx_cmd_channel_switch, .pre_pkt_send = NULL, }; diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile index f742249..81a864f 100644 --- a/drivers/net/wireless/ti/wl18xx/Makefile +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -1,3 +1,3 @@ -wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/cmd.c b/drivers/net/wireless/ti/wl18xx/cmd.c new file mode 100644 index 0000000..1d1f6cc --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/cmd.c @@ -0,0 +1,80 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/hw_ops.h" + +#include "cmd.h" + +int wl18xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl18xx_cmd_channel_switch *cmd; + u32 supported_rates; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->channel->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + switch (ch_switch->channel->band) { + case IEEE80211_BAND_2GHZ: + cmd->band = WLCORE_BAND_2_4GHZ; + break; + case IEEE80211_BAND_5GHZ: + cmd->band = WLCORE_BAND_5GHZ; + break; + default: + wl1271_error("invalid channel switch band: %d", + ch_switch->channel->band); + ret = -EINVAL; + goto out_free; + } + + supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES | + wlcore_hw_sta_get_ap_rate_mask(wl, wlvif); + if (wlvif->p2p) + supported_rates &= ~CONF_TX_CCK_RATES; + cmd->local_supported_rates = cpu_to_le32(supported_rates); + cmd->channel_type = wlvif->channel_type; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); +out: + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/cmd.h b/drivers/net/wireless/ti/wl18xx/cmd.h new file mode 100644 index 0000000..6687d10 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/cmd.h @@ -0,0 +1,52 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_CMD_H__ +#define __WL18XX_CMD_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/acx.h" + +struct wl18xx_cmd_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + + /* The new serving channel */ + u8 channel; + /* Relative time of the serving channel switch in TBTT units */ + u8 switch_time; + /* Stop the role TX, should expect it after radar detection */ + u8 stop_tx; + + __le32 local_supported_rates; + + u8 channel_type; + u8 band; + + u8 padding[2]; +} __packed; + +int wl18xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); + +#endif diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index e81b351..2e54a3e 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -34,6 +34,7 @@ #include "reg.h" #include "conf.h" +#include "cmd.h" #include "acx.h" #include "tx.h" #include "wl18xx.h" @@ -1335,6 +1336,7 @@ static struct wlcore_ops wl18xx_ops = { .handle_static_data = wl18xx_handle_static_data, .get_spare_blocks = wl18xx_get_spare_blocks, .set_key = wl18xx_set_key, + .channel_switch = wl18xx_cmd_channel_switch, .pre_pkt_send = wl18xx_pre_pkt_send, }; diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index c8c7766..9796765 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1722,43 +1722,7 @@ out: return ret; } -int wl12xx_cmd_channel_switch(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct ieee80211_channel_switch *ch_switch) -{ - struct wl12xx_cmd_channel_switch *cmd; - int ret; - - wl1271_debug(DEBUG_ACX, "cmd channel switch"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - cmd->role_id = wlvif->role_id; - cmd->channel = ch_switch->channel->hw_value; - cmd->switch_time = ch_switch->count; - cmd->stop_tx = ch_switch->block_tx; - - /* FIXME: control from mac80211 in the future */ - cmd->post_switch_tx_disable = 0; /* Enable TX on the target channel */ - - ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("failed to send channel switch command"); - goto out_free; - } - -out_free: - kfree(cmd); - -out: - return ret; -} - -int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl) +int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, struct wl12xx_vif *wlvif) { struct wl12xx_cmd_stop_channel_switch *cmd; int ret; @@ -1771,6 +1735,8 @@ int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl) goto out; } + cmd->role_id = wlvif->role_id; + ret = wl1271_cmd_send(wl, CMD_STOP_CHANNEL_SWICTH, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_error("failed to stop channel switch command"); diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 9e9062f..96d53a7 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -89,7 +89,8 @@ int wl12xx_cmd_stop_fwlog(struct wl1271 *wl); int wl12xx_cmd_channel_switch(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_channel_switch *ch_switch); -int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl); +int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif); int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); @@ -633,27 +634,13 @@ struct wl12xx_cmd_stop_fwlog { struct wl1271_cmd_header header; } __packed; -struct wl12xx_cmd_channel_switch { +struct wl12xx_cmd_stop_channel_switch { struct wl1271_cmd_header header; u8 role_id; - - /* The new serving channel */ - u8 channel; - /* Relative time of the serving channel switch in TBTT units */ - u8 switch_time; - /* Stop the role TX, should expect it after radar detection */ - u8 stop_tx; - /* The target channel tx status 1-stopped 0-open*/ - u8 post_switch_tx_disable; - u8 padding[3]; } __packed; -struct wl12xx_cmd_stop_channel_switch { - struct wl1271_cmd_header header; -} __packed; - /* Used to check radio status after calibration */ #define MAX_TLV_LENGTH 500 #define TEST_CMD_P2G_CAL 2 /* TX BiP */ diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 0f7a933..efb770a 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2673,7 +2673,7 @@ static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif) if (test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) { struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); - wl12xx_cmd_stop_channel_switch(wl); + wl12xx_cmd_stop_channel_switch(wl, wlvif); ieee80211_chswitch_done(vif, false); } @@ -4680,8 +4680,7 @@ static void wl12xx_op_channel_switch(struct ieee80211_hw *hw, /* TODO: change mac80211 to pass vif as param */ wl12xx_for_each_wlvif_sta(wl, wlvif) { - ret = wl12xx_cmd_channel_switch(wl, wlvif, ch_switch); - + ret = wl->ops->channel_switch(wl, wlvif, ch_switch); if (!ret) set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 36fde4e..1ad49c9 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -95,6 +95,9 @@ struct wlcore_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key_conf); + int (*channel_switch)(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); u32 (*pre_pkt_send)(struct wl1271 *wl, u32 buf_offset, u32 last_len); }; -- cgit v0.10.2 From c50a282515dc7092f7318708a0f3ae7ca7342b9f Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:19 +0200 Subject: wlcore: update events enum/struct to new fw api The event mailbox in wl18xx has a different (non-compatible) structure. Create common functions in wlcore to handle the events, and call them from the chip-specific event mailbox parsers. This way, each driver (wl12xx/wl18xx) extracts the event mailbox by itself according to its own structure, and then calls the common wlcore functions to handle it. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/Makefile b/drivers/net/wireless/ti/wl12xx/Makefile index 8d9afd2..e6a2405 100644 --- a/drivers/net/wireless/ti/wl12xx/Makefile +++ b/drivers/net/wireless/ti/wl12xx/Makefile @@ -1,3 +1,3 @@ -wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o +wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o event.o obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/ti/wl12xx/event.c b/drivers/net/wireless/ti/wl12xx/event.c new file mode 100644 index 0000000..6437dac --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/event.c @@ -0,0 +1,112 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "event.h" +#include "scan.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +int wl12xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout) +{ + u32 local_event; + + switch (event) { + case WLCORE_EVENT_ROLE_STOP_COMPLETE: + local_event = ROLE_STOP_COMPLETE_EVENT_ID; + break; + + case WLCORE_EVENT_PEER_REMOVE_COMPLETE: + local_event = PEER_REMOVE_COMPLETE_EVENT_ID; + break; + + default: + /* event not implemented */ + return 0; + } + return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout); +} + +int wl12xx_process_mailbox_events(struct wl1271 *wl) +{ + struct wl12xx_event_mailbox *mbox = wl->mbox; + u32 vector; + + + vector = le32_to_cpu(mbox->events_vector); + vector &= ~(le32_to_cpu(mbox->events_mask)); + + wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "status: 0x%x", + mbox->scheduled_scan_status); + + if (wl->scan_wlvif) + wl12xx_scan_completed(wl, wl->scan_wlvif); + } + + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) + wlcore_event_sched_scan_report(wl, + mbox->scheduled_scan_status); + + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) + wlcore_event_sched_scan_completed(wl, + mbox->scheduled_scan_status); + if (vector & SOFT_GEMINI_SENSE_EVENT_ID) + wlcore_event_soft_gemini_sense(wl, + mbox->soft_gemini_sense_info); + + if (vector & BSS_LOSE_EVENT_ID) + wlcore_event_beacon_loss(wl, 0xff); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) + wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric); + + if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) + wlcore_event_ba_rx_constraint(wl, + BIT(mbox->role_id), + mbox->rx_ba_allowed); + + if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) + wlcore_event_channel_switch(wl, 0xff, + mbox->channel_switch_status); + + if (vector & DUMMY_PACKET_EVENT_ID) + wlcore_event_dummy_packet(wl); + + /* + * "TX retries exceeded" has a different meaning according to mode. + * In AP mode the offending station is disconnected. + */ + if (vector & MAX_TX_RETRY_EVENT_ID) + wlcore_event_max_tx_failure(wl, + le16_to_cpu(mbox->sta_tx_retry_exceeded)); + + if (vector & INACTIVE_STA_EVENT_ID) + wlcore_event_inactive_sta(wl, + le16_to_cpu(mbox->sta_aging_status)); + + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) + wlcore_event_roc_complete(wl); + + return 0; +} diff --git a/drivers/net/wireless/ti/wl12xx/event.h b/drivers/net/wireless/ti/wl12xx/event.h new file mode 100644 index 0000000..a5cc3fc --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/event.h @@ -0,0 +1,111 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_EVENT_H__ +#define __WL12XX_EVENT_H__ + +#include "../wlcore/wlcore.h" + +enum { + MEASUREMENT_START_EVENT_ID = BIT(8), + MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), + SCAN_COMPLETE_EVENT_ID = BIT(10), + WFD_DISCOVERY_COMPLETE_EVENT_ID = BIT(11), + AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), + RESERVED1 = BIT(13), + PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), + ROLE_STOP_COMPLETE_EVENT_ID = BIT(15), + RADAR_DETECTED_EVENT_ID = BIT(16), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), + BSS_LOSE_EVENT_ID = BIT(18), + REGAINED_BSS_EVENT_ID = BIT(19), + MAX_TX_RETRY_EVENT_ID = BIT(20), + DUMMY_PACKET_EVENT_ID = BIT(21), + SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), + CHANGE_AUTO_MODE_TIMEOUT_EVENT_ID = BIT(23), + SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), + PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), + INACTIVE_STA_EVENT_ID = BIT(26), + PEER_REMOVE_COMPLETE_EVENT_ID = BIT(27), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), + BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(30), + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(31), +}; + +struct wl12xx_event_mailbox { + __le32 events_vector; + __le32 events_mask; + __le32 reserved_1; + __le32 reserved_2; + + u8 number_of_scan_results; + u8 scan_tag; + u8 completed_scan_status; + u8 reserved_3; + + u8 soft_gemini_sense_info; + u8 soft_gemini_protective_info; + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + u8 change_auto_mode_timeout; + u8 scheduled_scan_status; + u8 reserved4; + /* tuned channel (roc) */ + u8 roc_channel; + + __le16 hlid_removed_bitmap; + + /* bitmap of aged stations (by HLID) */ + __le16 sta_aging_status; + + /* bitmap of stations (by HLID) which exceeded max tx retries */ + __le16 sta_tx_retry_exceeded; + + /* discovery completed results */ + u8 discovery_tag; + u8 number_of_preq_results; + u8 number_of_prsp_results; + u8 reserved_5; + + /* rx ba constraint */ + u8 role_id; /* 0xFF means any role. */ + u8 rx_ba_allowed; + u8 reserved_6[2]; + + /* Channel switch results */ + + u8 channel_switch_role_id; + u8 channel_switch_status; + u8 reserved_7[2]; + + u8 ps_poll_delivery_failure_role_ids; + u8 stopped_role_ids; + u8 started_role_ids; + + u8 reserved_8[9]; +} __packed; + +int wl12xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); +int wl12xx_process_mailbox_events(struct wl1271 *wl); + +#endif + diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index b93de04..7138fe4 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -39,6 +39,7 @@ #include "cmd.h" #include "acx.h" #include "scan.h" +#include "event.h" #include "debugfs.h" static char *fref_param; @@ -1229,6 +1230,23 @@ static int wl12xx_boot(struct wl1271 *wl) if (ret < 0) goto out; + wl->event_mask = BSS_LOSE_EVENT_ID | + REGAINED_BSS_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + ROLE_STOP_COMPLETE_EVENT_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PSPOLL_DELIVERY_FAILURE_EVENT_ID | + SOFT_GEMINI_SENSE_EVENT_ID | + PERIODIC_SCAN_REPORT_EVENT_ID | + PERIODIC_SCAN_COMPLETE_EVENT_ID | + DUMMY_PACKET_EVENT_ID | + PEER_REMOVE_COMPLETE_EVENT_ID | + BA_SESSION_RX_CONSTRAINT_EVENT_ID | + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | + INACTIVE_STA_EVENT_ID | + MAX_TX_RETRY_EVENT_ID | + CHANNEL_SWITCH_COMPLETE_EVENT_ID; + ret = wlcore_boot_run_firmware(wl); if (ret < 0) goto out; @@ -1609,6 +1627,8 @@ static struct wlcore_ops wl12xx_ops = { .plt_init = wl12xx_plt_init, .trigger_cmd = wl12xx_trigger_cmd, .ack_event = wl12xx_ack_event, + .wait_for_event = wl12xx_wait_for_event, + .process_mailbox_events = wl12xx_process_mailbox_events, .calc_tx_blocks = wl12xx_calc_tx_blocks, .set_tx_desc_blocks = wl12xx_set_tx_desc_blocks, .set_tx_desc_data_len = wl12xx_set_tx_desc_data_len, @@ -1627,7 +1647,6 @@ static struct wlcore_ops wl12xx_ops = { .debugfs_init = wl12xx_debugfs_add_files, .scan_start = wl12xx_scan_start, .scan_stop = wl12xx_scan_stop, - .scan_completed = wl12xx_scan_completed, .sched_scan_start = wl12xx_sched_scan_start, .sched_scan_stop = wl12xx_scan_sched_scan_stop, .get_spare_blocks = wl12xx_get_spare_blocks, @@ -1719,7 +1738,8 @@ static int __devinit wl12xx_probe(struct platform_device *pdev) int ret; hw = wlcore_alloc_hw(sizeof(struct wl12xx_priv), - WL12XX_AGGR_BUFFER_SIZE); + WL12XX_AGGR_BUFFER_SIZE, + sizeof(struct wl12xx_event_mailbox)); if (IS_ERR(hw)) { wl1271_error("can't allocate hw"); ret = PTR_ERR(hw); diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile index 81a864f..ae2b817 100644 --- a/drivers/net/wireless/ti/wl18xx/Makefile +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -1,3 +1,3 @@ -wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o event.o obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c new file mode 100644 index 0000000..bf4233c --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -0,0 +1,99 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "event.h" +#include "scan.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout) +{ + u32 local_event; + + switch (event) { + case WLCORE_EVENT_PEER_REMOVE_COMPLETE: + local_event = PEER_REMOVE_COMPLETE_EVENT_ID; + break; + + default: + /* event not implemented */ + return 0; + } + return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout); +} + +int wl18xx_process_mailbox_events(struct wl1271 *wl) +{ + struct wl18xx_event_mailbox *mbox = wl->mbox; + u32 vector; + + vector = le32_to_cpu(mbox->events_vector); + wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "scan results: %d", + mbox->number_of_scan_results); + + if (wl->scan_wlvif) + wl18xx_scan_completed(wl, wl->scan_wlvif); + } + + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) + wlcore_event_sched_scan_completed(wl, 1); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) + wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric); + + if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) + wlcore_event_ba_rx_constraint(wl, + le16_to_cpu(mbox->rx_ba_role_id_bitmap), + le16_to_cpu(mbox->rx_ba_allowed_bitmap)); + + if (vector & BSS_LOSS_EVENT_ID) + wlcore_event_beacon_loss(wl, + le16_to_cpu(mbox->bss_loss_bitmap)); + + if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) + wlcore_event_channel_switch(wl, + le16_to_cpu(mbox->channel_switch_role_id_bitmap), + true); + + if (vector & DUMMY_PACKET_EVENT_ID) + wlcore_event_dummy_packet(wl); + + /* + * "TX retries exceeded" has a different meaning according to mode. + * In AP mode the offending station is disconnected. + */ + if (vector & MAX_TX_FAILURE_EVENT_ID) + wlcore_event_max_tx_failure(wl, + le32_to_cpu(mbox->tx_retry_exceeded_bitmap)); + + if (vector & INACTIVE_STA_EVENT_ID) + wlcore_event_inactive_sta(wl, + le32_to_cpu(mbox->inactive_sta_bitmap)); + + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) + wlcore_event_roc_complete(wl); + + return 0; +} diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h new file mode 100644 index 0000000..b55fd31 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/event.h @@ -0,0 +1,76 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_EVENT_H__ +#define __WL18XX_EVENT_H__ + +#include "../wlcore/wlcore.h" + +enum { + SCAN_COMPLETE_EVENT_ID = BIT(8), + RADAR_DETECTED_EVENT_ID = BIT(9), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(10), + BSS_LOSS_EVENT_ID = BIT(11), + MAX_TX_FAILURE_EVENT_ID = BIT(12), + DUMMY_PACKET_EVENT_ID = BIT(13), + INACTIVE_STA_EVENT_ID = BIT(14), + PEER_REMOVE_COMPLETE_EVENT_ID = BIT(15), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(16), + BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(17), + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(18), + DFS_CHANNELS_CONFIG_COMPLETE_EVENT = BIT(19), +}; + +struct wl18xx_event_mailbox { + __le32 events_vector; + + u8 number_of_scan_results; + u8 number_of_sched_scan_results; + + __le16 channel_switch_role_id_bitmap; + + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + + /* bitmap of removed links */ + __le32 hlid_removed_bitmap; + + /* rx ba constraint */ + __le16 rx_ba_role_id_bitmap; /* 0xfff means any role. */ + __le16 rx_ba_allowed_bitmap; + + /* bitmap of roc completed (by role id) */ + __le16 roc_completed_bitmap; + + /* bitmap of stations (by role id) with bss loss */ + __le16 bss_loss_bitmap; + + /* bitmap of stations (by HLID) which exceeded max tx retries */ + __le32 tx_retry_exceeded_bitmap; + + /* bitmap of inactive stations (by HLID) */ + __le32 inactive_sta_bitmap; +} __packed; + +int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); +int wl18xx_process_mailbox_events(struct wl1271 *wl); + +#endif diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 2e54a3e..0895ffa 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -40,6 +40,7 @@ #include "wl18xx.h" #include "io.h" #include "scan.h" +#include "event.h" #include "debugfs.h" #define WL18XX_RX_CHECKSUM_MASK 0x40 @@ -851,6 +852,18 @@ static int wl18xx_boot(struct wl1271 *wl) if (ret < 0) goto out; + wl->event_mask = BSS_LOSS_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PERIODIC_SCAN_COMPLETE_EVENT_ID | + DUMMY_PACKET_EVENT_ID | + PEER_REMOVE_COMPLETE_EVENT_ID | + BA_SESSION_RX_CONSTRAINT_EVENT_ID | + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | + INACTIVE_STA_EVENT_ID | + MAX_TX_FAILURE_EVENT_ID | + CHANNEL_SWITCH_COMPLETE_EVENT_ID; + ret = wlcore_boot_run_firmware(wl); if (ret < 0) goto out; @@ -1313,6 +1326,8 @@ static struct wlcore_ops wl18xx_ops = { .plt_init = wl18xx_plt_init, .trigger_cmd = wl18xx_trigger_cmd, .ack_event = wl18xx_ack_event, + .wait_for_event = wl18xx_wait_for_event, + .process_mailbox_events = wl18xx_process_mailbox_events, .calc_tx_blocks = wl18xx_calc_tx_blocks, .set_tx_desc_blocks = wl18xx_set_tx_desc_blocks, .set_tx_desc_data_len = wl18xx_set_tx_desc_data_len, @@ -1330,7 +1345,6 @@ static struct wlcore_ops wl18xx_ops = { .debugfs_init = wl18xx_debugfs_add_files, .scan_start = wl18xx_scan_start, .scan_stop = wl18xx_scan_stop, - .scan_completed = wl18xx_scan_completed, .sched_scan_start = wl18xx_sched_scan_start, .sched_scan_stop = wl18xx_scan_sched_scan_stop, .handle_static_data = wl18xx_handle_static_data, @@ -1524,7 +1538,8 @@ static int __devinit wl18xx_probe(struct platform_device *pdev) int ret; hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv), - WL18XX_AGGR_BUFFER_SIZE); + WL18XX_AGGR_BUFFER_SIZE, + sizeof(struct wl18xx_event_mailbox)); if (IS_ERR(hw)) { wl1271_error("can't allocate hw"); ret = PTR_ERR(hw); diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index 375ea57..230c765 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -491,7 +491,7 @@ int wlcore_boot_run_firmware(struct wl1271 *wl) if (ret < 0) return ret; - wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox); + wl->mbox_ptr[1] = wl->mbox_ptr[0] + wl->mbox_size; wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x", wl->mbox_ptr[0], wl->mbox_ptr[1]); @@ -508,23 +508,6 @@ int wlcore_boot_run_firmware(struct wl1271 *wl) */ /* unmask required mbox events */ - wl->event_mask = BSS_LOSE_EVENT_ID | - REGAINED_BSS_EVENT_ID | - SCAN_COMPLETE_EVENT_ID | - ROLE_STOP_COMPLETE_EVENT_ID | - RSSI_SNR_TRIGGER_0_EVENT_ID | - PSPOLL_DELIVERY_FAILURE_EVENT_ID | - SOFT_GEMINI_SENSE_EVENT_ID | - PERIODIC_SCAN_REPORT_EVENT_ID | - PERIODIC_SCAN_COMPLETE_EVENT_ID | - DUMMY_PACKET_EVENT_ID | - PEER_REMOVE_COMPLETE_EVENT_ID | - BA_SESSION_RX_CONSTRAINT_EVENT_ID | - REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | - INACTIVE_STA_EVENT_ID | - MAX_TX_RETRY_EVENT_ID | - CHANNEL_SWITCH_COMPLETE_EVENT_ID; - ret = wl1271_event_unmask(wl); if (ret < 0) { wl1271_error("EVENT mask setting failed"); diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 9796765..63102f2 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -137,8 +137,8 @@ EXPORT_SYMBOL_GPL(wl1271_cmd_send); * Poll the mailbox event field until any of the bits in the mask is set or a * timeout occurs (WL1271_EVENT_TIMEOUT in msecs) */ -static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, - u32 mask, bool *timeout) +int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, + u32 mask, bool *timeout) { u32 *events_vector; u32 event; @@ -188,20 +188,7 @@ out: kfree(events_vector); return ret; } - -static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask) -{ - int ret; - bool timeout = false; - - ret = wl1271_cmd_wait_for_event_or_timeout(wl, mask, &timeout); - if (ret != 0 || timeout) { - wl12xx_queue_recovery_work(wl); - return ret; - } - - return 0; -} +EXPORT_SYMBOL_GPL(wlcore_cmd_wait_for_event_or_timeout); int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type, u8 *role_id) @@ -423,12 +410,6 @@ static int wl12xx_cmd_role_stop_dev(struct wl1271 *wl, goto out_free; } - ret = wl1271_cmd_wait_for_event(wl, ROLE_STOP_COMPLETE_EVENT_ID); - if (ret < 0) { - wl1271_error("cmd role stop dev event completion error"); - goto out_free; - } - wl12xx_free_link(wl, wlvif, &wlvif->dev_hlid); out_free: @@ -516,7 +497,6 @@ int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) { struct wl12xx_cmd_role_stop *cmd; int ret; - bool timeout = false; if (WARN_ON(wlvif->sta.hlid == WL12XX_INVALID_LINK_ID)) return -EINVAL; @@ -539,17 +519,6 @@ int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) goto out_free; } - /* - * Sometimes the firmware doesn't send this event, so we just - * time out without failing. Queue recovery for other - * failures. - */ - ret = wl1271_cmd_wait_for_event_or_timeout(wl, - ROLE_STOP_COMPLETE_EVENT_ID, - &timeout); - if (ret) - wl12xx_queue_recovery_work(wl); - wl12xx_free_link(wl, wlvif, &wlvif->sta.hlid); out_free: @@ -1505,9 +1474,10 @@ int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid) goto out_free; } - ret = wl1271_cmd_wait_for_event_or_timeout(wl, - PEER_REMOVE_COMPLETE_EVENT_ID, - &timeout); + ret = wl->ops->wait_for_event(wl, + WLCORE_EVENT_PEER_REMOVE_COMPLETE, + &timeout); + /* * We are ok with a timeout here. The event is sometimes not sent * due to a firmware bug. In case of another error (like SDIO timeout) diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 96d53a7..46513da 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -94,6 +94,8 @@ int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); +int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, + u32 mask, bool *timeout); enum wl1271_commands { CMD_INTERROGATE = 1, /* use this to read information elements */ diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index d9353da..3c20393 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -29,25 +29,29 @@ #include "scan.h" #include "wl12xx_80211.h" -static void wl1271_event_rssi_trigger(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct event_mailbox *mbox) +void wlcore_event_rssi_trigger(struct wl1271 *wl, s8 *metric_arr) { - struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; enum nl80211_cqm_rssi_threshold_event event; - s8 metric = mbox->rssi_snr_trigger_metric[0]; + s8 metric = metric_arr[0]; wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric); - if (metric <= wlvif->rssi_thold) - event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; - else - event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; - - if (event != wlvif->last_rssi_event) - ieee80211_cqm_rssi_notify(vif, event, GFP_KERNEL); - wlvif->last_rssi_event = event; + /* TODO: check actual multi-role support */ + wl12xx_for_each_wlvif_sta(wl, wlvif) { + if (metric <= wlvif->rssi_thold) + event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; + else + event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; + + vif = wl12xx_wlvif_to_vif(wlvif); + if (event != wlvif->last_rssi_event) + ieee80211_cqm_rssi_notify(vif, event, GFP_KERNEL); + wlvif->last_rssi_event = event; + } } +EXPORT_SYMBOL_GPL(wlcore_event_rssi_trigger); static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif) { @@ -74,8 +78,7 @@ static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif) } } -static void wl12xx_event_soft_gemini_sense(struct wl1271 *wl, - u8 enable) +void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable) { struct wl12xx_vif *wlvif; @@ -87,210 +90,179 @@ static void wl12xx_event_soft_gemini_sense(struct wl1271 *wl, wl1271_recalc_rx_streaming(wl, wlvif); } } - } +EXPORT_SYMBOL_GPL(wlcore_event_soft_gemini_sense); -static void wl1271_event_mbox_dump(struct event_mailbox *mbox) +void wlcore_event_sched_scan_report(struct wl1271 *wl, + u8 status) { - wl1271_debug(DEBUG_EVENT, "MBOX DUMP:"); - wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector); - wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask); + wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", + status); + + wl1271_scan_sched_scan_results(wl); } +EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_report); -static int wl1271_event_process(struct wl1271 *wl) +void wlcore_event_sched_scan_completed(struct wl1271 *wl, + u8 status) { - struct event_mailbox *mbox = wl->mbox; - struct ieee80211_vif *vif; - struct wl12xx_vif *wlvif; - u32 vector; - bool disconnect_sta = false; - unsigned long sta_bitmap = 0; - int ret; + wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT (status 0x%0x)", + status); - wl1271_event_mbox_dump(mbox); + if (wl->sched_scanning) { + ieee80211_sched_scan_stopped(wl->hw); + wl->sched_scanning = false; + } +} +EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_completed); - vector = le32_to_cpu(mbox->events_vector); - vector &= ~(le32_to_cpu(mbox->events_mask)); - wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector); +void wlcore_event_ba_rx_constraint(struct wl1271 *wl, + unsigned long roles_bitmap, + unsigned long allowed_bitmap) +{ + struct wl12xx_vif *wlvif; - if (vector & SCAN_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "status: 0x%x", - mbox->scheduled_scan_status); + wl1271_debug(DEBUG_EVENT, "%s: roles=0x%lx allowed=0x%lx", + __func__, roles_bitmap, allowed_bitmap); - if (wl->scan_vif) - wl->ops->scan_completed(wl, - wl12xx_vif_to_data(wl->scan_vif)); - } + wl12xx_for_each_wlvif(wl, wlvif) { + if (wlvif->role_id == WL12XX_INVALID_ROLE_ID || + !test_bit(wlvif->role_id , &roles_bitmap)) + continue; - if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT " - "(status 0x%0x)", mbox->scheduled_scan_status); - - wl1271_scan_sched_scan_results(wl); + wlvif->ba_allowed = !!test_bit(wlvif->role_id, + &allowed_bitmap); + if (!wlvif->ba_allowed) + wl1271_stop_ba_event(wl, wlvif); } +} +EXPORT_SYMBOL_GPL(wlcore_event_ba_rx_constraint); - if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT " - "(status 0x%0x)", mbox->scheduled_scan_status); - if (wl->sched_scanning) { - ieee80211_sched_scan_stopped(wl->hw); - wl->sched_scanning = false; - } - } +void wlcore_event_channel_switch(struct wl1271 *wl, + unsigned long roles_bitmap, + bool success) +{ + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; - if (vector & SOFT_GEMINI_SENSE_EVENT_ID) - wl12xx_event_soft_gemini_sense(wl, - mbox->soft_gemini_sense_info); + wl1271_debug(DEBUG_EVENT, "%s: roles=0x%lx success=%d", + __func__, roles_bitmap, success); - /* - * We are HW_MONITOR device. On beacon loss - queue - * connection loss work. Cancel it on REGAINED event. - */ - if (vector & BSS_LOSE_EVENT_ID) { - /* TODO: check for multi-role */ - int delay = wl->conf.conn.synch_fail_thold * - wl->conf.conn.bss_lose_timeout; - wl1271_info("Beacon loss detected."); + wl12xx_for_each_wlvif_sta(wl, wlvif) { + if (wlvif->role_id == WL12XX_INVALID_ROLE_ID || + !test_bit(wlvif->role_id , &roles_bitmap)) + continue; - /* - * if the work is already queued, it should take place. We - * don't want to delay the connection loss indication - * any more. - */ - ieee80211_queue_delayed_work(wl->hw, &wl->connection_loss_work, - msecs_to_jiffies(delay)); + if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, + &wlvif->flags)) + continue; - wl12xx_for_each_wlvif_sta(wl, wlvif) { - vif = wl12xx_wlvif_to_vif(wlvif); + vif = wl12xx_wlvif_to_vif(wlvif); - ieee80211_cqm_rssi_notify( - vif, - NL80211_CQM_RSSI_BEACON_LOSS_EVENT, - GFP_KERNEL); - } + ieee80211_chswitch_done(vif, success); + cancel_delayed_work(&wlvif->channel_switch_work); } +} +EXPORT_SYMBOL_GPL(wlcore_event_channel_switch); - if (vector & REGAINED_BSS_EVENT_ID) { - /* TODO: check for multi-role */ - wl1271_info("Beacon regained."); - cancel_delayed_work(&wl->connection_loss_work); - - /* sanity check - we can't lose and gain the beacon together */ - WARN(vector & BSS_LOSE_EVENT_ID, - "Concurrent beacon loss and gain from FW"); - } +void wlcore_event_dummy_packet(struct wl1271 *wl) +{ + wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID"); + wl1271_tx_dummy_packet(wl); +} +EXPORT_SYMBOL_GPL(wlcore_event_dummy_packet); - if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) { - /* TODO: check actual multi-role support */ - wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT"); - wl12xx_for_each_wlvif_sta(wl, wlvif) { - wl1271_event_rssi_trigger(wl, wlvif, mbox); +static void wlcore_disconnect_sta(struct wl1271 *wl, unsigned long sta_bitmap) +{ + u32 num_packets = wl->conf.tx.max_tx_retries; + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; + struct ieee80211_sta *sta; + const u8 *addr; + int h; + + for_each_set_bit(h, &sta_bitmap, WL12XX_MAX_LINKS) { + bool found = false; + /* find the ap vif connected to this sta */ + wl12xx_for_each_wlvif_ap(wl, wlvif) { + if (!test_bit(h, wlvif->ap.sta_hlid_map)) + continue; + found = true; + break; } - } - - if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) { - u8 role_id = mbox->role_id; - wl1271_debug(DEBUG_EVENT, "BA_SESSION_RX_CONSTRAINT_EVENT_ID. " - "ba_allowed = 0x%x, role_id=%d", - mbox->rx_ba_allowed, role_id); + if (!found) + continue; - wl12xx_for_each_wlvif(wl, wlvif) { - if (role_id != 0xff && role_id != wlvif->role_id) - continue; + vif = wl12xx_wlvif_to_vif(wlvif); + addr = wl->links[h].addr; - wlvif->ba_allowed = !!mbox->rx_ba_allowed; - if (!wlvif->ba_allowed) - wl1271_stop_ba_event(wl, wlvif); + rcu_read_lock(); + sta = ieee80211_find_sta(vif, addr); + if (sta) { + wl1271_debug(DEBUG_EVENT, "remove sta %d", h); + ieee80211_report_low_ack(sta, num_packets); } + rcu_read_unlock(); } +} - if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "CHANNEL_SWITCH_COMPLETE_EVENT_ID. " - "status = 0x%x", - mbox->channel_switch_status); - /* - * That event uses for two cases: - * 1) channel switch complete with status=0 - * 2) channel switch failed status=1 - */ - - /* TODO: configure only the relevant vif */ - wl12xx_for_each_wlvif_sta(wl, wlvif) { - bool success; - - if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, - &wlvif->flags)) - continue; - - success = mbox->channel_switch_status ? false : true; - vif = wl12xx_wlvif_to_vif(wlvif); +void wlcore_event_max_tx_failure(struct wl1271 *wl, unsigned long sta_bitmap) +{ + wl1271_debug(DEBUG_EVENT, "MAX_TX_FAILURE_EVENT_ID"); + wlcore_disconnect_sta(wl, sta_bitmap); +} +EXPORT_SYMBOL_GPL(wlcore_event_max_tx_failure); - ieee80211_chswitch_done(vif, success); - } - } +void wlcore_event_inactive_sta(struct wl1271 *wl, unsigned long sta_bitmap) +{ + wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID"); + wlcore_disconnect_sta(wl, sta_bitmap); +} +EXPORT_SYMBOL_GPL(wlcore_event_inactive_sta); - if ((vector & DUMMY_PACKET_EVENT_ID)) { - wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID"); - ret = wl1271_tx_dummy_packet(wl); - if (ret < 0) - return ret; - } +void wlcore_event_roc_complete(struct wl1271 *wl) +{ + wl1271_debug(DEBUG_EVENT, "REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID"); + if (wl->roc_vif) + ieee80211_ready_on_channel(wl->hw); +} +EXPORT_SYMBOL_GPL(wlcore_event_roc_complete); +void wlcore_event_beacon_loss(struct wl1271 *wl, unsigned long roles_bitmap) +{ /* - * "TX retries exceeded" has a different meaning according to mode. - * In AP mode the offending station is disconnected. + * We are HW_MONITOR device. On beacon loss - queue + * connection loss work. Cancel it on REGAINED event. */ - if (vector & MAX_TX_RETRY_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID"); - sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded); - disconnect_sta = true; - } - - if (vector & INACTIVE_STA_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID"); - sta_bitmap |= le16_to_cpu(mbox->sta_aging_status); - disconnect_sta = true; - } + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; + int delay = wl->conf.conn.synch_fail_thold * + wl->conf.conn.bss_lose_timeout; - if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, - "REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID"); - if (wl->roc_vif) - ieee80211_ready_on_channel(wl->hw); - } + wl1271_info("Beacon loss detected. roles:0x%lx", roles_bitmap); - if (disconnect_sta) { - u32 num_packets = wl->conf.tx.max_tx_retries; - struct ieee80211_sta *sta; - const u8 *addr; - int h; - - for_each_set_bit(h, &sta_bitmap, WL12XX_MAX_LINKS) { - bool found = false; - /* find the ap vif connected to this sta */ - wl12xx_for_each_wlvif_ap(wl, wlvif) { - if (!test_bit(h, wlvif->ap.sta_hlid_map)) - continue; - found = true; - break; - } - if (!found) - continue; + wl12xx_for_each_wlvif_sta(wl, wlvif) { + if (wlvif->role_id == WL12XX_INVALID_ROLE_ID || + !test_bit(wlvif->role_id , &roles_bitmap)) + continue; - vif = wl12xx_wlvif_to_vif(wlvif); - addr = wl->links[h].addr; + /* + * if the work is already queued, it should take place. + * We don't want to delay the connection loss + * indication any more. + */ + ieee80211_queue_delayed_work(wl->hw, + &wlvif->connection_loss_work, + msecs_to_jiffies(delay)); - rcu_read_lock(); - sta = ieee80211_find_sta(vif, addr); - if (sta) { - wl1271_debug(DEBUG_EVENT, "remove sta %d", h); - ieee80211_report_low_ack(sta, num_packets); - } - rcu_read_unlock(); - } + vif = wl12xx_wlvif_to_vif(wlvif); + ieee80211_cqm_rssi_notify( + vif, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, + GFP_KERNEL); } - return 0; } +EXPORT_SYMBOL_GPL(wlcore_event_beacon_loss); int wl1271_event_unmask(struct wl1271 *wl) { @@ -314,12 +286,12 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num) /* first we read the mbox descriptor */ ret = wlcore_read(wl, wl->mbox_ptr[mbox_num], wl->mbox, - sizeof(*wl->mbox), false); + wl->mbox_size, false); if (ret < 0) return ret; /* process the descriptor */ - ret = wl1271_event_process(wl); + ret = wl->ops->process_mailbox_events(wl); if (ret < 0) return ret; diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h index 8adf18d..766b02f 100644 --- a/drivers/net/wireless/ti/wlcore/event.h +++ b/drivers/net/wireless/ti/wlcore/event.h @@ -46,33 +46,16 @@ enum { RSSI_SNR_TRIGGER_5_EVENT_ID = BIT(5), RSSI_SNR_TRIGGER_6_EVENT_ID = BIT(6), RSSI_SNR_TRIGGER_7_EVENT_ID = BIT(7), - MEASUREMENT_START_EVENT_ID = BIT(8), - MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), - SCAN_COMPLETE_EVENT_ID = BIT(10), - WFD_DISCOVERY_COMPLETE_EVENT_ID = BIT(11), - AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), - RESERVED1 = BIT(13), - PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), - ROLE_STOP_COMPLETE_EVENT_ID = BIT(15), - RADAR_DETECTED_EVENT_ID = BIT(16), - CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), - BSS_LOSE_EVENT_ID = BIT(18), - REGAINED_BSS_EVENT_ID = BIT(19), - MAX_TX_RETRY_EVENT_ID = BIT(20), - DUMMY_PACKET_EVENT_ID = BIT(21), - SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), - CHANGE_AUTO_MODE_TIMEOUT_EVENT_ID = BIT(23), - SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), - PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), - INACTIVE_STA_EVENT_ID = BIT(26), - PEER_REMOVE_COMPLETE_EVENT_ID = BIT(27), - PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), - PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), - BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(30), - REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(31), + EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff, }; +/* events the driver might want to wait for */ +enum wlcore_wait_event { + WLCORE_EVENT_ROLE_STOP_COMPLETE, + WLCORE_EVENT_PEER_REMOVE_COMPLETE, +}; + enum { EVENT_ENTER_POWER_SAVE_FAIL = 0, EVENT_ENTER_POWER_SAVE_SUCCESS, @@ -80,61 +63,26 @@ enum { #define NUM_OF_RSSI_SNR_TRIGGERS 8 -struct event_mailbox { - __le32 events_vector; - __le32 events_mask; - __le32 reserved_1; - __le32 reserved_2; - - u8 number_of_scan_results; - u8 scan_tag; - u8 completed_scan_status; - u8 reserved_3; - - u8 soft_gemini_sense_info; - u8 soft_gemini_protective_info; - s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; - u8 change_auto_mode_timeout; - u8 scheduled_scan_status; - u8 reserved4; - /* tuned channel (roc) */ - u8 roc_channel; - - __le16 hlid_removed_bitmap; - - /* bitmap of aged stations (by HLID) */ - __le16 sta_aging_status; - - /* bitmap of stations (by HLID) which exceeded max tx retries */ - __le16 sta_tx_retry_exceeded; - - /* discovery completed results */ - u8 discovery_tag; - u8 number_of_preq_results; - u8 number_of_prsp_results; - u8 reserved_5; - - /* rx ba constraint */ - u8 role_id; /* 0xFF means any role. */ - u8 rx_ba_allowed; - u8 reserved_6[2]; - - /* Channel switch results */ - - u8 channel_switch_role_id; - u8 channel_switch_status; - u8 reserved_7[2]; - - u8 ps_poll_delivery_failure_role_ids; - u8 stopped_role_ids; - u8 started_role_ids; - - u8 reserved_8[9]; -} __packed; - struct wl1271; int wl1271_event_unmask(struct wl1271 *wl); int wl1271_event_handle(struct wl1271 *wl, u8 mbox); +void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable); +void wlcore_event_sched_scan_report(struct wl1271 *wl, + u8 status); +void wlcore_event_sched_scan_completed(struct wl1271 *wl, + u8 status); +void wlcore_event_ba_rx_constraint(struct wl1271 *wl, + unsigned long roles_bitmap, + unsigned long allowed_bitmap); +void wlcore_event_channel_switch(struct wl1271 *wl, + unsigned long roles_bitmap, + bool success); +void wlcore_event_beacon_loss(struct wl1271 *wl, unsigned long roles_bitmap); +void wlcore_event_dummy_packet(struct wl1271 *wl); +void wlcore_event_max_tx_failure(struct wl1271 *wl, unsigned long sta_bitmap); +void wlcore_event_inactive_sta(struct wl1271 *wl, unsigned long sta_bitmap); +void wlcore_event_roc_complete(struct wl1271 *wl); +void wlcore_event_rssi_trigger(struct wl1271 *wl, s8 *metric_arr); #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index efb770a..043bf7f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1139,7 +1139,6 @@ int wl1271_plt_stop(struct wl1271 *wl) cancel_work_sync(&wl->recovery_work); cancel_delayed_work_sync(&wl->elp_work); cancel_delayed_work_sync(&wl->tx_watchdog_work); - cancel_delayed_work_sync(&wl->connection_loss_work); mutex_lock(&wl->mutex); wl1271_power_off(wl); @@ -1841,7 +1840,6 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) cancel_work_sync(&wl->tx_work); cancel_delayed_work_sync(&wl->elp_work); cancel_delayed_work_sync(&wl->tx_watchdog_work); - cancel_delayed_work_sync(&wl->connection_loss_work); /* let's notify MAC80211 about the remaining pending TX frames */ wl12xx_tx_reset(wl); @@ -1916,6 +1914,71 @@ static void wlcore_op_stop(struct ieee80211_hw *hw) mutex_unlock(&wl->mutex); } +static void wlcore_channel_switch_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + struct ieee80211_vif *vif; + struct wl12xx_vif *wlvif; + int ret; + + dwork = container_of(work, struct delayed_work, work); + wlvif = container_of(dwork, struct wl12xx_vif, channel_switch_work); + wl = wlvif->wl; + + wl1271_info("channel switch failed (role_id: %d).", wlvif->role_id); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + /* check the channel switch is still ongoing */ + if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) + goto out; + + vif = wl12xx_wlvif_to_vif(wlvif); + ieee80211_chswitch_done(vif, false); + + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + wl12xx_cmd_stop_channel_switch(wl, wlvif); + + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); +} + +static void wlcore_connection_loss_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + struct ieee80211_vif *vif; + struct wl12xx_vif *wlvif; + + dwork = container_of(work, struct delayed_work, work); + wlvif = container_of(dwork, struct wl12xx_vif, connection_loss_work); + wl = wlvif->wl; + + wl1271_info("Connection loss work (role_id: %d).", wlvif->role_id); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + /* Call mac80211 connection loss */ + if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) + goto out; + + vif = wl12xx_wlvif_to_vif(wlvif); + ieee80211_connection_loss(vif); +out: + mutex_unlock(&wl->mutex); +} + static int wl12xx_allocate_rate_policy(struct wl1271 *wl, u8 *idx) { u8 policy = find_first_zero_bit(wl->rate_policies_map, @@ -2063,6 +2126,10 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) wl1271_rx_streaming_enable_work); INIT_WORK(&wlvif->rx_streaming_disable_work, wl1271_rx_streaming_disable_work); + INIT_DELAYED_WORK(&wlvif->channel_switch_work, + wlcore_channel_switch_work); + INIT_DELAYED_WORK(&wlvif->connection_loss_work, + wlcore_connection_loss_work); INIT_LIST_HEAD(&wlvif->list); setup_timer(&wlvif->rx_streaming_timer, wl1271_rx_streaming_timer, @@ -2312,7 +2379,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, wl1271_info("down"); if (wl->scan.state != WL1271_SCAN_STATE_IDLE && - wl->scan_vif == vif) { + wl->scan_wlvif == wlvif) { /* * Rearm the tx watchdog just before idling scan. This * prevents just-finished scans from triggering the watchdog @@ -2321,7 +2388,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, wl->scan.state = WL1271_SCAN_STATE_IDLE; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); - wl->scan_vif = NULL; + wl->scan_wlvif = NULL; wl->scan.req = NULL; ieee80211_scan_completed(wl->hw, true); } @@ -2408,6 +2475,7 @@ unlock: del_timer_sync(&wlvif->rx_streaming_timer); cancel_work_sync(&wlvif->rx_streaming_enable_work); cancel_work_sync(&wlvif->rx_streaming_disable_work); + cancel_delayed_work_sync(&wlvif->connection_loss_work); mutex_lock(&wl->mutex); } @@ -2675,6 +2743,7 @@ static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif) wl12xx_cmd_stop_channel_switch(wl, wlvif); ieee80211_chswitch_done(vif, false); + cancel_delayed_work(&wlvif->channel_switch_work); } /* invalidate keep-alive template */ @@ -3296,7 +3365,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, wl->scan.state = WL1271_SCAN_STATE_IDLE; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); - wl->scan_vif = NULL; + wl->scan_wlvif = NULL; wl->scan.req = NULL; ieee80211_scan_completed(wl->hw, true); @@ -4087,7 +4156,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, * state changed */ if (!is_ap && (changed & BSS_CHANGED_ASSOC)) - cancel_delayed_work_sync(&wl->connection_loss_work); + cancel_delayed_work_sync(&wlvif->connection_loss_work); if (is_ap && (changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon) @@ -4680,11 +4749,23 @@ static void wl12xx_op_channel_switch(struct ieee80211_hw *hw, /* TODO: change mac80211 to pass vif as param */ wl12xx_for_each_wlvif_sta(wl, wlvif) { + unsigned long delay_usec; + ret = wl->ops->channel_switch(wl, wlvif, ch_switch); - if (!ret) - set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); + if (ret) + goto out_sleep; + + set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); + + /* indicate failure 5 seconds after channel switch time */ + delay_usec = ieee80211_tu_to_usec(wlvif->beacon_int) * + ch_switch->count; + ieee80211_queue_delayed_work(hw, &wlvif->channel_switch_work, + usecs_to_jiffies(delay_usec) + + msecs_to_jiffies(5000)); } +out_sleep: wl1271_ps_elp_sleep(wl); out: @@ -5193,34 +5274,6 @@ static struct bin_attribute fwlog_attr = { .read = wl1271_sysfs_read_fwlog, }; -static void wl1271_connection_loss_work(struct work_struct *work) -{ - struct delayed_work *dwork; - struct wl1271 *wl; - struct ieee80211_vif *vif; - struct wl12xx_vif *wlvif; - - dwork = container_of(work, struct delayed_work, work); - wl = container_of(dwork, struct wl1271, connection_loss_work); - - wl1271_info("Connection loss work."); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state != WLCORE_STATE_ON)) - goto out; - - /* Call mac80211 connection loss */ - wl12xx_for_each_wlvif_sta(wl, wlvif) { - if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) - goto out; - vif = wl12xx_wlvif_to_vif(wlvif); - ieee80211_connection_loss(vif); - } -out: - mutex_unlock(&wl->mutex); -} - static void wl12xx_derive_mac_addresses(struct wl1271 *wl, u32 oui, u32 nic) { int i; @@ -5478,7 +5531,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) #define WL1271_DEFAULT_CHANNEL 0 -struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) +struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, + u32 mbox_size) { struct ieee80211_hw *hw; struct wl1271 *wl; @@ -5522,8 +5576,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); INIT_DELAYED_WORK(&wl->roc_complete_work, wlcore_roc_complete_work); INIT_DELAYED_WORK(&wl->tx_watchdog_work, wl12xx_tx_watchdog_work); - INIT_DELAYED_WORK(&wl->connection_loss_work, - wl1271_connection_loss_work); wl->freezable_wq = create_freezable_workqueue("wl12xx_wq"); if (!wl->freezable_wq) { @@ -5586,7 +5638,8 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) goto err_dummy_packet; } - wl->mbox = kmalloc(sizeof(*wl->mbox), GFP_KERNEL | GFP_DMA); + wl->mbox_size = mbox_size; + wl->mbox = kmalloc(wl->mbox_size, GFP_KERNEL | GFP_DMA); if (!wl->mbox) { ret = -ENOMEM; goto err_fwlog; diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index e7d0a02..eeb6188 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -35,7 +35,6 @@ void wl1271_scan_complete_work(struct work_struct *work) { struct delayed_work *dwork; struct wl1271 *wl; - struct ieee80211_vif *vif; struct wl12xx_vif *wlvif; int ret; @@ -52,8 +51,7 @@ void wl1271_scan_complete_work(struct work_struct *work) if (wl->scan.state == WL1271_SCAN_STATE_IDLE) goto out; - vif = wl->scan_vif; - wlvif = wl12xx_vif_to_data(vif); + wlvif = wl->scan_wlvif; /* * Rearm the tx watchdog just before idling scan. This @@ -64,7 +62,7 @@ void wl1271_scan_complete_work(struct work_struct *work) wl->scan.state = WL1271_SCAN_STATE_IDLE; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); wl->scan.req = NULL; - wl->scan_vif = NULL; + wl->scan_wlvif = NULL; ret = wl1271_ps_elp_wakeup(wl); if (ret < 0) @@ -295,7 +293,7 @@ int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, wl->scan.ssid_len = 0; } - wl->scan_vif = vif; + wl->scan_wlvif = wlvif; wl->scan.req = req; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 1ad49c9..d47eb6c 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -51,6 +51,9 @@ struct wlcore_ops { int (*trigger_cmd)(struct wl1271 *wl, int cmd_box_addr, void *buf, size_t len); int (*ack_event)(struct wl1271 *wl); + int (*wait_for_event)(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); + int (*process_mailbox_events)(struct wl1271 *wl); u32 (*calc_tx_blocks)(struct wl1271 *wl, u32 len, u32 spare_blks); void (*set_tx_desc_blocks)(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, @@ -85,7 +88,6 @@ struct wlcore_ops { int (*scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_scan_request *req); int (*scan_stop)(struct wl1271 *wl, struct wl12xx_vif *wlvif); - void (*scan_completed)(struct wl1271 *wl, struct wl12xx_vif *wlvif); int (*sched_scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); @@ -281,22 +283,20 @@ struct wl1271 { bool watchdog_recovery; /* Pointer that holds DMA-friendly block for the mailbox */ - struct event_mailbox *mbox; + void *mbox; /* The mbox event mask */ u32 event_mask; /* Mailbox pointers */ + u32 mbox_size; u32 mbox_ptr[2]; /* Are we currently scanning */ - struct ieee80211_vif *scan_vif; + struct wl12xx_vif *scan_wlvif; struct wl1271_scan scan; struct delayed_work scan_complete_work; - /* Connection loss work */ - struct delayed_work connection_loss_work; - struct ieee80211_vif *roc_vif; struct delayed_work roc_complete_work; @@ -436,7 +436,8 @@ struct wl1271 { int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev); int __devexit wlcore_remove(struct platform_device *pdev); -struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size); +struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, + u32 mbox_size); int wlcore_free_hw(struct wl1271 *wl); int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_vif *vif, diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 6678d4b..bc3b5f4 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -421,6 +421,9 @@ struct wl12xx_vif { struct work_struct rx_streaming_disable_work; struct timer_list rx_streaming_timer; + struct delayed_work channel_switch_work; + struct delayed_work connection_loss_work; + /* * This struct must be last! * data that has to be saved acrossed reconfigs (e.g. recovery) -- cgit v0.10.2 From d50529c0d8b7f03012f140349161c29b0f7bd24c Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:20 +0200 Subject: wlcore: pass wmm configuration to the fw New fields were added to start_role(ap) and set_peer_state commands, so the fw will be able to know whether the sta/ap supports wmm (the fw uses it in order to choose the AC for some of its internally-generated frames) For sta, take this value right from bss_conf->qos. For ap, check for wmm support by looking for the WMM IE in the configured beacon. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 63102f2..b2ebe39 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -570,6 +570,7 @@ int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->ap.beacon_expiry = WL1271_AP_DEF_BEACON_EXP; /* FIXME: Change when adding DFS */ cmd->ap.reset_tsf = 1; /* By default reset AP TSF */ + cmd->ap.wmm = wlvif->wmm_enabled; cmd->channel = wlvif->channel; cmd->channel_type = wlcore_get_native_channel_type(wlvif->channel_type); @@ -1363,7 +1364,8 @@ out: return ret; } -int wl12xx_cmd_set_peer_state(struct wl1271 *wl, u8 hlid) +int wl12xx_cmd_set_peer_state(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 hlid) { struct wl12xx_cmd_set_peer_state *cmd; int ret = 0; @@ -1379,6 +1381,10 @@ int wl12xx_cmd_set_peer_state(struct wl1271 *wl, u8 hlid) cmd->hlid = hlid; cmd->state = WL1271_CMD_STA_STATE_CONNECTED; + /* wmm param is valid only for station role */ + if (wlvif->bss_type == BSS_TYPE_STA_BSS) + cmd->wmm = wlvif->wmm_enabled; + ret = wl1271_cmd_send(wl, CMD_SET_PEER_STATE, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_error("failed to send set peer state command"); diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 46513da..2070a10 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -76,7 +76,8 @@ int wl1271_cmd_set_ap_key(struct wl1271 *wl, struct wl12xx_vif *wlvif, u16 action, u8 id, u8 key_type, u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32, u16 tx_seq_16); -int wl12xx_cmd_set_peer_state(struct wl1271 *wl, u8 hlid); +int wl12xx_cmd_set_peer_state(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 hlid); int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id, enum ieee80211_band band, u8 channel); int wl12xx_croc(struct wl1271 *wl, u8 role_id); @@ -355,7 +356,13 @@ struct wl12xx_cmd_role_start { u8 reset_tsf; - u8 padding_1[4]; + /* + * ap supports wmm (note that there is additional + * per-sta wmm configuration) + */ + u8 wmm; + + u8 padding_1[3]; } __packed ap; }; } __packed; @@ -525,7 +532,14 @@ struct wl12xx_cmd_set_peer_state { u8 hlid; u8 state; - u8 padding[2]; + + /* + * wmm is relevant for sta role only. + * ap role configures the per-sta wmm params in + * the add_peer command. + */ + u8 wmm; + u8 padding[1]; } __packed; struct wl12xx_cmd_roc { diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 043bf7f..d7fe07b 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -79,7 +79,7 @@ static int wl12xx_set_authorized(struct wl1271 *wl, if (test_and_set_bit(WLVIF_FLAG_STA_STATE_SENT, &wlvif->flags)) return 0; - ret = wl12xx_cmd_set_peer_state(wl, wlvif->sta.hlid); + ret = wl12xx_cmd_set_peer_state(wl, wlvif, wlvif->sta.hlid); if (ret < 0) return ret; @@ -2630,6 +2630,7 @@ static int wlcore_set_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif, wlvif->aid = bss_conf->aid; wlvif->channel_type = bss_conf->channel_type; wlvif->beacon_int = bss_conf->beacon_int; + wlvif->wmm_enabled = bss_conf->qos; set_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags); @@ -3692,6 +3693,12 @@ static int wlcore_set_beacon_template(struct wl1271 *wl, goto out; } + wlvif->wmm_enabled = + cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, + WLAN_OUI_TYPE_MICROSOFT_WMM, + beacon->data + ieoffset, + beacon->len - ieoffset); + /* * In case we already have a probe-resp beacon set explicitly * by usermode, don't use the beacon data. @@ -4478,7 +4485,7 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, /* Authorize station (AP mode) */ if (is_ap && new_state == IEEE80211_STA_AUTHORIZED) { - ret = wl12xx_cmd_set_peer_state(wl, hlid); + ret = wl12xx_cmd_set_peer_state(wl, wlvif, hlid); if (ret < 0) return ret; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index bc3b5f4..8478bbc 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -416,6 +416,8 @@ struct wl12xx_vif { bool ba_support; bool ba_allowed; + bool wmm_enabled; + /* Rx Streaming */ struct work_struct rx_streaming_enable_work; struct work_struct rx_streaming_disable_work; -- cgit v0.10.2 From 978cd3a0b82969c1f85942e208f8a00412964ef6 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:21 +0200 Subject: wlcore: save session_id per-link A new session_id is generated on link allocation. it is saved in a global array and used later, on tx. The new fw api adds new bcast/global_session_id fields to start_role(ap) command, and a new session_id field to add_peer command. align the driver with it. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index b2ebe39..1735a53 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -266,6 +266,16 @@ out: return ret; } +static int wlcore_get_new_session_id(struct wl1271 *wl, u8 hlid) +{ + if (wl->session_ids[hlid] >= SESSION_COUNTER_MAX) + wl->session_ids[hlid] = 0; + + wl->session_ids[hlid]++; + + return wl->session_ids[hlid]; +} + int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) { unsigned long flags; @@ -273,6 +283,8 @@ int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) if (link >= WL12XX_MAX_LINKS) return -EBUSY; + wl->session_ids[link] = wlcore_get_new_session_id(wl, link); + /* these bits are used by op_tx */ spin_lock_irqsave(&wl->wl_lock, flags); __set_bit(link, wl->links_map); @@ -304,17 +316,6 @@ void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) *hlid = WL12XX_INVALID_LINK_ID; } -static int wl12xx_get_new_session_id(struct wl1271 *wl, - struct wl12xx_vif *wlvif) -{ - if (wlvif->session_counter >= SESSION_COUNTER_MAX) - wlvif->session_counter = 0; - - wlvif->session_counter++; - - return wlvif->session_counter; -} - static u8 wlcore_get_native_channel_type(u8 nl_channel_type) { switch (nl_channel_type) { @@ -359,7 +360,7 @@ static int wl12xx_cmd_role_start_dev(struct wl1271 *wl, goto out_free; } cmd->device.hlid = wlvif->dev_hlid; - cmd->device.session = wl12xx_get_new_session_id(wl, wlvif); + cmd->device.session = wl->session_ids[wlvif->dev_hlid]; wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d", cmd->role_id, cmd->device.hlid, cmd->device.session); @@ -460,7 +461,7 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) goto out_free; } cmd->sta.hlid = wlvif->sta.hlid; - cmd->sta.session = wl12xx_get_new_session_id(wl, wlvif); + cmd->sta.session = wl->session_ids[wlvif->sta.hlid]; /* * We don't have the correct remote rates in this stage, and there * is no way to update them later, so use our supported rates instead. @@ -564,6 +565,8 @@ int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->ap.bss_index = WL1271_AP_BSS_INDEX; cmd->ap.global_hlid = wlvif->ap.global_hlid; cmd->ap.broadcast_hlid = wlvif->ap.bcast_hlid; + cmd->ap.global_session_id = wl->session_ids[wlvif->ap.global_hlid]; + cmd->ap.bcast_session_id = wl->session_ids[wlvif->ap.bcast_hlid]; cmd->ap.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set); cmd->ap.beacon_interval = cpu_to_le16(wlvif->beacon_int); cmd->ap.dtim_interval = bss_conf->dtim_period; @@ -1419,6 +1422,7 @@ int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, cmd->hlid = hlid; cmd->sp_len = sta->max_sp; cmd->wmm = sta->wme ? 1 : 0; + cmd->session_id = wl->session_ids[hlid]; for (i = 0; i < NUM_ACCESS_CATEGORIES_COPY; i++) if (sta->wme && (sta->uapsd_queues & BIT(i))) diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 2070a10..c9f8268 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -362,7 +362,9 @@ struct wl12xx_cmd_role_start { */ u8 wmm; - u8 padding_1[3]; + u8 bcast_session_id; + u8 global_session_id; + u8 padding_1[1]; } __packed ap; }; } __packed; @@ -582,7 +584,7 @@ struct wl12xx_cmd_add_peer { u8 bss_index; u8 sp_len; u8 wmm; - u8 padding1; + u8 session_id; } __packed; struct wl12xx_cmd_remove_peer { diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c index 93f801d..80376d4 100644 --- a/drivers/net/wireless/ti/wlcore/debugfs.c +++ b/drivers/net/wireless/ti/wlcore/debugfs.c @@ -589,7 +589,6 @@ static ssize_t vifs_state_read(struct file *file, char __user *user_buf, VIF_STATE_PRINT_INT(beacon_int); VIF_STATE_PRINT_INT(default_key); VIF_STATE_PRINT_INT(aid); - VIF_STATE_PRINT_INT(session_counter); VIF_STATE_PRINT_INT(psm_entry_retry); VIF_STATE_PRINT_INT(power_level); VIF_STATE_PRINT_INT(rssi_thold); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d7fe07b..97e4a9c 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1871,6 +1871,7 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) memset(wl->roles_map, 0, sizeof(wl->roles_map)); memset(wl->links_map, 0, sizeof(wl->links_map)); memset(wl->roc_map, 0, sizeof(wl->roc_map)); + memset(wl->session_ids, 0, sizeof(wl->session_ids)); wl->active_sta_count = 0; /* The system link is always allocated */ diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 2844f30..68f73f9 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -294,7 +294,7 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct wl12xx_vif *wlvif, tx_attr |= TX_HW_ATTR_TX_DUMMY_REQ; } else if (wlvif) { /* configure the tx attributes */ - tx_attr = wlvif->session_counter << + tx_attr = wl->session_ids[hlid] << TX_HW_ATTR_OFST_SESSION_COUNTER; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index d47eb6c..e9254b7 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -215,6 +215,8 @@ struct wl1271 { unsigned long klv_templates_map[ BITS_TO_LONGS(WLCORE_MAX_KLV_TEMPLATES)]; + u8 session_ids[WL12XX_MAX_LINKS]; + struct list_head wlvif_list; u8 sta_count; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 8478bbc..6be1e8e 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -396,9 +396,6 @@ struct wl12xx_vif { /* Our association ID */ u16 aid; - /* Session counter for the chipset */ - int session_counter; - /* retry counter for PSM entries */ u8 psm_entry_retry; -- cgit v0.10.2 From 050757da5d54d8e25dc06bfbd9179c7d0073137a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:21:41 +0530 Subject: ath6kl: Remove erroneous flag clearing WLAN_ENABLED is vif specific, not part of the driver's struct ath6kl. Proper clearing of this flag is already taken care in ath6kl_cleanup_vif. Cc: wei-jen jlin Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index f21fa32..828cfbf 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1801,8 +1801,6 @@ void ath6kl_stop_txrx(struct ath6kl *ar) "attempting to reset target on instance destroy\n"); ath6kl_reset_device(ar, ar->target_type, true, true); - clear_bit(WLAN_ENABLED, &ar->flag); - up(&ar->sem); } EXPORT_SYMBOL(ath6kl_stop_txrx); -- cgit v0.10.2 From 895dc3867705f7622977c8870771e15881b3e421 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:03 +0530 Subject: ath6kl: Use standard way to assign the boolean variable Assign 'true' to the bool variable instead of needless typecasting. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index ba6bd49..575e7d7 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -1184,7 +1184,7 @@ static void reset_endpoint_states(struct htc_target *target) INIT_LIST_HEAD(&ep->pipe.tx_lookup_queue); INIT_LIST_HEAD(&ep->rx_bufq); ep->target = target; - ep->pipe.tx_credit_flow_enabled = (bool) 1; /* FIXME */ + ep->pipe.tx_credit_flow_enabled = true; } } -- cgit v0.10.2 From e16ccfeefbba6a268d00eb04145a172ad6e51cd8 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:22 +0530 Subject: ath6kl: remove unnecessary check for NULL skb dev_kfree_skb kernel API itself takes for checking for NULL skb, so an explicit check is not required. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index 575e7d7..73a38f9 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -509,9 +509,7 @@ static void destroy_htc_txctrl_packet(struct htc_packet *packet) { struct sk_buff *skb; skb = packet->skb; - if (skb != NULL) - dev_kfree_skb(skb); - + dev_kfree_skb(skb); kfree(packet); } @@ -1054,6 +1052,7 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, dev_kfree_skb(skb); skb = NULL; + goto free_skb; } @@ -1089,8 +1088,7 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, skb = NULL; free_skb: - if (skb != NULL) - dev_kfree_skb(skb); + dev_kfree_skb(skb); return status; diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c index 62bcc0d..5fcd342 100644 --- a/drivers/net/wireless/ath/ath6kl/usb.c +++ b/drivers/net/wireless/ath/ath6kl/usb.c @@ -159,10 +159,8 @@ static void ath6kl_usb_free_urb_to_pipe(struct ath6kl_usb_pipe *pipe, static void ath6kl_usb_cleanup_recv_urb(struct ath6kl_urb_context *urb_context) { - if (urb_context->skb != NULL) { - dev_kfree_skb(urb_context->skb); - urb_context->skb = NULL; - } + dev_kfree_skb(urb_context->skb); + urb_context->skb = NULL; ath6kl_usb_free_urb_to_pipe(urb_context->pipe, urb_context); } diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 55ccf97..f4ef6a7 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -2481,16 +2481,11 @@ static int ath6kl_wmi_sync_point(struct wmi *wmi, u8 if_idx) free_cmd_skb: /* free up any resources left over (possibly due to an error) */ - if (skb) - dev_kfree_skb(skb); + dev_kfree_skb(skb); free_data_skb: - for (index = 0; index < num_pri_streams; index++) { - if (data_sync_bufs[index].skb != NULL) { - dev_kfree_skb((struct sk_buff *)data_sync_bufs[index]. - skb); - } - } + for (index = 0; index < num_pri_streams; index++) + dev_kfree_skb((struct sk_buff *)data_sync_bufs[index].skb); return ret; } -- cgit v0.10.2 From de2070fc4aa7c0205348010f500f5abce012e67b Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:40 +0530 Subject: ath6kl: Fix kernel panic on continuous driver load/unload On continuous loading and unloading of AR6004 ath6kl USB driver it triggers a panic due to NULL pointer dereference of 'target' pointer. while true; do sudo modprobe -v ath6kl_core; sudo modprobe -v ath6kl_usb; sudo modprobe -r usb; sudo modprobe -r ath6kl_core; done ar->htc_target can be NULL due to a race condition that can occur during driver initialization(we do 'ath6kl_hif_power_on' before initializing 'ar->htc_target' via 'ath6kl_htc_create'). 'ath6kl_hif_power_on' assigns 'ath6kl_recv_complete' as usb_complete_t/callback function for 'usb_fill_bulk_urb'. Thus the possibility of ar->htc_target being NULL via ath6kl_recv_complete -> ath6kl_usb_io_comp_work before even 'ath6kl_htc_create' is finished to initialize ar->htc_create. Worth noting is the obvious solution of doing 'ath6kl_hif_power_on' later(i.e after we are done with 'ath6kl_htc_create', causes a h/w bring up failure in AR6003 SDIO, as 'ath6kl_hif_power_on' is a pre-requisite to get the target version 'ath6kl_bmi_get_target_info'. So simply check for NULL pointer for 'ar->htc_target' and bail out. [23614.518282] BUG: unable to handle kernel NULL pointer dereference at 00000904 [23614.518463] IP: [] __ticket_spin_trylock+0x6/0x30 [23614.518570] *pde = 00000000 [23614.518664] Oops: 0000 [#1] SMP [23614.518795] Modules linked in: ath6kl_usb(O+) ath6kl_core(O) [23614.520012] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [23614.520012] EIP is at __ticket_spin_trylock+0x6/0x30 Call Trace: [] do_raw_spin_trylock+0x14/0x40 [] _raw_spin_lock_bh+0x52/0x80 [] ? ath6kl_htc_pipe_rx_complete+0x3b4/0x4c0 [ath6kl_core] [] ath6kl_htc_pipe_rx_complete+0x3b4/0x4c0 [ath6kl_core] [] ? skb_dequeue+0x22/0x70 [] ? skb_dequeue+0x22/0x70 [] ath6kl_core_rx_complete+0x12/0x20 [ath6kl_core] [] ath6kl_usb_io_comp_work+0xaa/0xb0 [ath6kl_usb] [] process_one_work+0x1a3/0x5e0 [] ? process_one_work+0x127/0x5e0 [] ? ath6kl_usb_reset_resume+0x30/0x30 [ath6kl_usb] [] worker_thread+0x11e/0x3f0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index 73a38f9..2813901 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -967,6 +967,22 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, u16 payload_len; int status = 0; + /* + * ar->htc_target can be NULL due to a race condition that can occur + * during driver initialization(we do 'ath6kl_hif_power_on' before + * initializing 'ar->htc_target' via 'ath6kl_htc_create'). + * 'ath6kl_hif_power_on' assigns 'ath6kl_recv_complete' as + * usb_complete_t/callback function for 'usb_fill_bulk_urb'. + * Thus the possibility of ar->htc_target being NULL + * via ath6kl_recv_complete -> ath6kl_usb_io_comp_work. + */ + if (WARN_ON_ONCE(!target)) { + ath6kl_err("Target not yet initialized\n"); + status = -EINVAL; + goto free_skb; + } + + netdata = skb->data; netlen = skb->len; -- cgit v0.10.2 From 8aa659d2c9ad2df8873c5ba1d7f030d6acf39c4c Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:57 +0530 Subject: ath6kl: trivial cleanup on interface type selection a minor cleanup in assigning the driver specific network type based on interface type. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 459d700..cea8856 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1557,17 +1557,13 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy, set_iface_type: switch (type) { case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: vif->next_mode = INFRA_NETWORK; break; case NL80211_IFTYPE_ADHOC: vif->next_mode = ADHOC_NETWORK; break; case NL80211_IFTYPE_AP: - vif->next_mode = AP_NETWORK; - break; - case NL80211_IFTYPE_P2P_CLIENT: - vif->next_mode = INFRA_NETWORK; - break; case NL80211_IFTYPE_P2P_GO: vif->next_mode = AP_NETWORK; break; -- cgit v0.10.2 From eb922e4b41fd315f4ef95fef0ca1051b61cd5538 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:23:15 +0530 Subject: ath6kl: Parse beacon interval from userspace Parse beacon interval from userspace to firmware. Incase the firmware does not supports it, just print a warning message and continue with AP settings. Cc: Sumathi Mandipati Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index cea8856..f253d66 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -2770,9 +2770,11 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, ar->ap_mode_bkey.valid = false; - /* TODO: - * info->interval - */ + ret = ath6kl_wmi_ap_set_beacon_intvl_cmd(ar->wmi, vif->fw_vif_idx, + info->beacon_interval); + + if (ret) + ath6kl_warn("Failed to set beacon interval: %d\n", ret); ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx, info->dtim_period); diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index f4ef6a7..a0503c2 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -752,6 +752,23 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid) NO_SYNC_WMIFLAG); } +int ath6kl_wmi_ap_set_beacon_intvl_cmd(struct wmi *wmi, u8 if_idx, + u32 beacon_intvl) +{ + struct sk_buff *skb; + struct set_beacon_int_cmd *cmd; + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct set_beacon_int_cmd *) skb->data; + + cmd->beacon_intvl = cpu_to_le32(beacon_intvl); + return ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_SET_BEACON_INT_CMDID, NO_SYNC_WMIFLAG); +} + int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 98b1755..b5f2265 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -1660,6 +1660,10 @@ struct roam_ctrl_cmd { u8 roam_ctrl; } __packed; +struct set_beacon_int_cmd { + __le32 beacon_intvl; +} __packed; + struct set_dtim_cmd { __le32 dtim_period; } __packed; @@ -2649,6 +2653,8 @@ int ath6kl_wmi_del_wow_pattern_cmd(struct wmi *wmi, u8 if_idx, int ath6kl_wmi_set_rssi_filter_cmd(struct wmi *wmi, u8 if_idx, s8 rssi); int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi); int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period); +int ath6kl_wmi_ap_set_beacon_intvl_cmd(struct wmi *wmi, u8 if_idx, + u32 beacon_interval); int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid); int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode); int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on); -- cgit v0.10.2 From 355b3a982095c8647cce13dd43ebc4bc4299f31a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:23:36 +0530 Subject: ath6kl: Move and rename ath6kl_cleanup_vif function Rename ath6kl_cleanup_vif function as 'ath6kl_cfg80211_vif_stop' which is the more appropriate name considering the functionality of the module and vif specific cleanup is actually done by ath6kl_cfg80211_vif_cleanup. Also move it to cfg80211.c. Also make ath6kl_cfg80211_sta_bmiss_enhance as static function. This addresses a FIXME/TODO. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index f253d66..e978316 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -427,6 +427,30 @@ static bool ath6kl_is_tx_pending(struct ath6kl *ar) return ar->tx_pending[ath6kl_wmi_get_control_ep(ar->wmi)] == 0; } +static void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, + bool enable) +{ + int err; + + if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) + return; + + if (vif->nw_type != INFRA_NETWORK) + return; + + if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, + vif->ar->fw_capabilities)) + return; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", + enable ? "enable" : "disable"); + + err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, + vif->fw_vif_idx, enable); + if (err) + ath6kl_err("failed to %s enhanced bmiss detection: %d\n", + enable ? "enable" : "disable", err); +} static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme) @@ -1507,7 +1531,7 @@ static int ath6kl_cfg80211_del_iface(struct wiphy *wiphy, list_del(&vif->list); spin_unlock_bh(&ar->list_lock); - ath6kl_cleanup_vif(vif, test_bit(WMI_READY, &ar->flag)); + ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag)); ath6kl_cfg80211_vif_cleanup(vif); @@ -2667,30 +2691,6 @@ static int ath6kl_set_ies(struct ath6kl_vif *vif, return 0; } -void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable) -{ - int err; - - if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) - return; - - if (vif->nw_type != INFRA_NETWORK) - return; - - if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, - vif->ar->fw_capabilities)) - return; - - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", - enable ? "enable" : "disable"); - - err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, - vif->fw_vif_idx, enable); - if (err) - ath6kl_err("failed to %s enhanced bmiss detection: %d\n", - enable ? "enable" : "disable", err); -} - static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon, u8 *rsn_capab) { @@ -3561,6 +3561,37 @@ static int ath6kl_cfg80211_vif_init(struct ath6kl_vif *vif) return 0; } +void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready) +{ + static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + bool discon_issued; + + netif_stop_queue(vif->ndev); + + clear_bit(WLAN_ENABLED, &vif->flags); + + if (wmi_ready) { + discon_issued = test_bit(CONNECTED, &vif->flags) || + test_bit(CONNECT_PEND, &vif->flags); + ath6kl_disconnect(vif); + del_timer(&vif->disconnect_timer); + + if (discon_issued) + ath6kl_disconnect_event(vif, DISCONNECT_CMD, + (vif->nw_type & AP_NETWORK) ? + bcast_mac : vif->bssid, + 0, NULL, 0); + } + + if (vif->scan_req) { + cfg80211_scan_done(vif->scan_req, true); + vif->scan_req = NULL; + } + + /* need to clean up enhanced bmiss detection fw state */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, false); +} + void ath6kl_cfg80211_vif_cleanup(struct ath6kl_vif *vif) { struct ath6kl *ar = vif->ar; diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h index e5e70f3..b59becd 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.h +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h @@ -61,7 +61,5 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar); struct ath6kl *ath6kl_cfg80211_create(void); void ath6kl_cfg80211_destroy(struct ath6kl *ar); -/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */ -void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable); #endif /* ATH6KL_CFG80211_H */ diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 189d8fa..61b2f98 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -940,7 +940,7 @@ void ath6kl_reset_device(struct ath6kl *ar, u32 target_type, bool wait_fot_compltn, bool cold_reset); void ath6kl_init_control_info(struct ath6kl_vif *vif); struct ath6kl_vif *ath6kl_vif_first(struct ath6kl *ar); -void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready); +void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready); int ath6kl_init_hw_start(struct ath6kl *ar); int ath6kl_init_hw_stop(struct ath6kl *ar); int ath6kl_init_fetch_firmwares(struct ath6kl *ar); diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 828cfbf..5d434cf 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1715,38 +1715,6 @@ void ath6kl_init_hw_restart(struct ath6kl *ar) } } -/* FIXME: move this to cfg80211.c and rename to ath6kl_cfg80211_vif_stop() */ -void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready) -{ - static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - bool discon_issued; - - netif_stop_queue(vif->ndev); - - clear_bit(WLAN_ENABLED, &vif->flags); - - if (wmi_ready) { - discon_issued = test_bit(CONNECTED, &vif->flags) || - test_bit(CONNECT_PEND, &vif->flags); - ath6kl_disconnect(vif); - del_timer(&vif->disconnect_timer); - - if (discon_issued) - ath6kl_disconnect_event(vif, DISCONNECT_CMD, - (vif->nw_type & AP_NETWORK) ? - bcast_mac : vif->bssid, - 0, NULL, 0); - } - - if (vif->scan_req) { - cfg80211_scan_done(vif->scan_req, true); - vif->scan_req = NULL; - } - - /* need to clean up enhanced bmiss detection fw state */ - ath6kl_cfg80211_sta_bmiss_enhance(vif, false); -} - void ath6kl_stop_txrx(struct ath6kl *ar) { struct ath6kl_vif *vif, *tmp_vif; @@ -1766,7 +1734,7 @@ void ath6kl_stop_txrx(struct ath6kl *ar) list_for_each_entry_safe(vif, tmp_vif, &ar->vif_list, list) { list_del(&vif->list); spin_unlock_bh(&ar->list_lock); - ath6kl_cleanup_vif(vif, test_bit(WMI_READY, &ar->flag)); + ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag)); rtnl_lock(); ath6kl_cfg80211_vif_cleanup(vif); rtnl_unlock(); -- cgit v0.10.2 From 6f7c1adb7529935df6e288a1436003c1f6dc0653 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:24:37 +0530 Subject: ath6kl: minor optimization using if, else if Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index e978316..ac0761c 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -640,13 +640,13 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, vif->req_bssid, vif->ch_hint, ar->connect_ctrl_flags, nw_subtype); - /* disable background scan if period is 0 */ - if (sme->bg_scan_period == 0) + if (sme->bg_scan_period == 0) { + /* disable background scan if period is 0 */ sme->bg_scan_period = 0xffff; - - /* configure default value if not specified */ - if (sme->bg_scan_period == -1) + } else if (sme->bg_scan_period == -1) { + /* configure default value if not specified */ sme->bg_scan_period = DEFAULT_BG_SCAN_PERIOD; + } ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx, 0, 0, sme->bg_scan_period, 0, 0, 0, 3, 0, 0, 0); -- cgit v0.10.2 From 6b70e7eb70cd6c5ad445ec02f74b84131a4c721a Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Sun, 25 Nov 2012 18:26:59 +0200 Subject: wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c index bf4233c..02ef5aa 100644 --- a/drivers/net/wireless/ti/wl18xx/event.c +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -34,6 +34,10 @@ int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, local_event = PEER_REMOVE_COMPLETE_EVENT_ID; break; + case WLCORE_EVENT_DFS_CONFIG_COMPLETE: + local_event = DFS_CHANNELS_CONFIG_COMPLETE_EVENT; + break; + default: /* event not implemented */ return 0; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0895ffa..f1eaf9a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -616,6 +616,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | WLCORE_QUIRK_TX_PAD_LAST_FRAME | + WLCORE_QUIRK_REGDOMAIN_CONF | WLCORE_QUIRK_DUAL_PROBE_TMPL; wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, @@ -862,7 +863,8 @@ static int wl18xx_boot(struct wl1271 *wl) REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | INACTIVE_STA_EVENT_ID | MAX_TX_FAILURE_EVENT_ID | - CHANNEL_SWITCH_COMPLETE_EVENT_ID; + CHANNEL_SWITCH_COMPLETE_EVENT_ID | + DFS_CHANNELS_CONFIG_COMPLETE_EVENT; ret = wlcore_boot_run_firmware(wl); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1735a53..599c006 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1503,6 +1503,131 @@ out: return ret; } +static int wlcore_get_reg_conf_ch_idx(enum ieee80211_band band, u16 ch) +{ + int idx = -1; + + switch (band) { + case IEEE80211_BAND_5GHZ: + if (ch >= 8 && ch <= 16) + idx = ((ch-8)/4 + 18); + else if (ch >= 34 && ch <= 64) + idx = ((ch-34)/2 + 3 + 18); + else if (ch >= 100 && ch <= 140) + idx = ((ch-100)/4 + 15 + 18); + else if (ch >= 149 && ch <= 165) + idx = ((ch-149)/4 + 26 + 18); + else + idx = -1; + break; + case IEEE80211_BAND_2GHZ: + if (ch >= 1 && ch <= 14) + idx = ch - 1; + else + idx = -1; + break; + default: + wl1271_error("get reg conf ch idx - unknown band: %d", + (int)band); + } + + return idx; +} + +void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, + enum ieee80211_band band) +{ + int ch_bit_idx = 0; + + if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) + return; + + ch_bit_idx = wlcore_get_reg_conf_ch_idx(band, channel); + + if (ch_bit_idx > 0 && ch_bit_idx <= WL1271_MAX_CHANNELS) + set_bit(ch_bit_idx, (long *)wl->reg_ch_conf_pending); +} + +int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl) +{ + struct wl12xx_cmd_regdomain_dfs_config *cmd = NULL; + int ret = 0, i, b, ch_bit_idx; + struct ieee80211_channel *channel; + u32 tmp_ch_bitmap[2]; + u16 ch; + struct wiphy *wiphy = wl->hw->wiphy; + struct ieee80211_supported_band *band; + bool timeout = false; + + if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) + return 0; + + wl1271_debug(DEBUG_CMD, "cmd reg domain config"); + + memset(tmp_ch_bitmap, 0, sizeof(tmp_ch_bitmap)); + + for (b = IEEE80211_BAND_2GHZ; b <= IEEE80211_BAND_5GHZ; b++) { + band = wiphy->bands[b]; + for (i = 0; i < band->n_channels; i++) { + channel = &band->channels[i]; + ch = channel->hw_value; + + if (channel->flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_PASSIVE_SCAN)) + continue; + + ch_bit_idx = wlcore_get_reg_conf_ch_idx(b, ch); + if (ch_bit_idx < 0) + continue; + + set_bit(ch_bit_idx, (long *)tmp_ch_bitmap); + } + } + + tmp_ch_bitmap[0] |= wl->reg_ch_conf_pending[0]; + tmp_ch_bitmap[1] |= wl->reg_ch_conf_pending[1]; + + if (!memcmp(tmp_ch_bitmap, wl->reg_ch_conf_last, sizeof(tmp_ch_bitmap))) + goto out; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->ch_bit_map1 = cpu_to_le32(tmp_ch_bitmap[0]); + cmd->ch_bit_map2 = cpu_to_le32(tmp_ch_bitmap[1]); + + wl1271_debug(DEBUG_CMD, + "cmd reg domain bitmap1: 0x%08x, bitmap2: 0x%08x", + cmd->ch_bit_map1, cmd->ch_bit_map2); + + ret = wl1271_cmd_send(wl, CMD_DFS_CHANNEL_CONFIG, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send reg domain dfs config"); + goto out; + } + + ret = wl->ops->wait_for_event(wl, + WLCORE_EVENT_DFS_CONFIG_COMPLETE, + &timeout); + if (ret < 0 || timeout) { + wl1271_error("reg domain conf %serror", + timeout ? "completion " : ""); + ret = timeout ? -ETIMEDOUT : ret; + goto out; + } + + memcpy(wl->reg_ch_conf_last, tmp_ch_bitmap, sizeof(tmp_ch_bitmap)); + memset(wl->reg_ch_conf_pending, 0, sizeof(wl->reg_ch_conf_pending)); + +out: + kfree(cmd); + return ret; +} + int wl12xx_cmd_config_fwlog(struct wl1271 *wl) { struct wl12xx_cmd_config_fwlog *cmd; diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index c9f8268..7f378b7 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -84,6 +84,9 @@ int wl12xx_croc(struct wl1271 *wl, u8 role_id); int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_sta *sta, u8 hlid); int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid); +void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, + enum ieee80211_band band); +int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl); int wl12xx_cmd_config_fwlog(struct wl1271 *wl); int wl12xx_cmd_start_fwlog(struct wl1271 *wl); int wl12xx_cmd_stop_fwlog(struct wl1271 *wl); @@ -623,6 +626,13 @@ enum wl12xx_fwlogger_output { WL12XX_FWLOG_OUTPUT_HOST, }; +struct wl12xx_cmd_regdomain_dfs_config { + struct wl1271_cmd_header header; + + __le32 ch_bit_map1; + __le32 ch_bit_map2; +} __packed; + struct wl12xx_cmd_config_fwlog { struct wl1271_cmd_header header; diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h index 766b02f..b4353be 100644 --- a/drivers/net/wireless/ti/wlcore/event.h +++ b/drivers/net/wireless/ti/wlcore/event.h @@ -54,6 +54,7 @@ enum { enum wlcore_wait_event { WLCORE_EVENT_ROLE_STOP_COMPLETE, WLCORE_EVENT_PEER_REMOVE_COMPLETE, + WLCORE_EVENT_DFS_CONFIG_COMPLETE }; enum { diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 06e1bf9..68828b4 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -681,6 +681,10 @@ int wl1271_hw_init(struct wl1271 *wl) if (ret < 0) return ret; + ret = wlcore_cmd_regdomain_config_locked(wl); + if (ret < 0) + return ret; + /* Bluetooth WLAN coexistence */ ret = wl1271_init_pta(wl); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 97e4a9c..015d769 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -93,6 +93,8 @@ static int wl1271_reg_notify(struct wiphy *wiphy, struct ieee80211_supported_band *band; struct ieee80211_channel *ch; int i; + struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); + struct wl1271 *wl = hw->priv; band = wiphy->bands[IEEE80211_BAND_5GHZ]; for (i = 0; i < band->n_channels; i++) { @@ -106,6 +108,9 @@ static int wl1271_reg_notify(struct wiphy *wiphy, } + if (likely(wl->state == WLCORE_STATE_ON)) + wlcore_regdomain_config(wl); + return 0; } @@ -1900,6 +1905,12 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) wl->tx_res_if = NULL; kfree(wl->target_mem_map); wl->target_mem_map = NULL; + + /* + * FW channels must be re-calibrated after recovery, + * clear the last Reg-Domain channel configuration. + */ + memset(wl->reg_ch_conf_last, 0, sizeof(wl->reg_ch_conf_last)); } static void wlcore_op_stop(struct ieee80211_hw *hw) @@ -3284,6 +3295,29 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, } EXPORT_SYMBOL_GPL(wlcore_set_key); +void wlcore_regdomain_config(struct wl1271 *wl) +{ + int ret; + + if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) + return; + + mutex_lock(&wl->mutex); + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + ret = wlcore_cmd_regdomain_config_locked(wl); + if (ret < 0) { + wl12xx_queue_recovery_work(wl); + goto out; + } + + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); +} + static int wl1271_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_scan_request *req) diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c index 9ee0ec6..4665b96 100644 --- a/drivers/net/wireless/ti/wlcore/rx.c +++ b/drivers/net/wireless/ti/wlcore/rx.c @@ -97,6 +97,10 @@ static void wl1271_rx_status(struct wl1271 *wl, wl1271_warning("Michael MIC error"); } } + + if (beacon) + wlcore_set_pending_regdomain_ch(wl, (u16)desc->channel, + status->band); } static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length, diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index eeb6188..c913700 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -80,6 +80,8 @@ void wl1271_scan_complete_work(struct work_struct *work) wl12xx_queue_recovery_work(wl); } + wlcore_cmd_regdomain_config_locked(wl); + ieee80211_scan_completed(wl->hw, false); out: diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index e9254b7..d3818ef 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -284,6 +284,11 @@ struct wl1271 { struct work_struct recovery_work; bool watchdog_recovery; + /* Reg domain last configuration */ + u32 reg_ch_conf_last[2]; + /* Reg domain pending configuration */ + u32 reg_ch_conf_pending[2]; + /* Pointer that holds DMA-friendly block for the mailbox */ void *mbox; @@ -445,6 +450,7 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key_conf); +void wlcore_regdomain_config(struct wl1271 *wl); static inline void wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band, @@ -503,6 +509,10 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* separate probe response templates for one-shot and sched scans */ #define WLCORE_QUIRK_DUAL_PROBE_TMPL BIT(10) +/* Firmware requires reg domain configuration for active calibration */ +#define WLCORE_QUIRK_REGDOMAIN_CONF BIT(11) + + /* TODO: move to the lower drivers when all usages are abstracted */ #define CHIP_ID_1271_PG10 (0x4030101) #define CHIP_ID_1271_PG20 (0x4030111) -- cgit v0.10.2 From 1019975640ec16d1753c06ac99207f4af6a721a2 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:23 +0200 Subject: wlcore: call ieee80211_sched_scan_stopped on interface removal The interface might go down before we got the SCHED_STOPPED event, so make sure to call ieee80211_sched_scan_stopped() if the scanned interface is removed. Replace sched_scanning with sched_vif in order to save the scanned interface. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c index 80376d4..1cf2cdb 100644 --- a/drivers/net/wireless/ti/wlcore/debugfs.c +++ b/drivers/net/wireless/ti/wlcore/debugfs.c @@ -490,7 +490,6 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf, DRIVER_STATE_PRINT_HEX(chip.id); DRIVER_STATE_PRINT_STR(chip.fw_ver_str); DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str); - DRIVER_STATE_PRINT_INT(sched_scanning); #undef DRIVER_STATE_PRINT_INT #undef DRIVER_STATE_PRINT_LONG diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index 3c20393..cb32c02 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -109,9 +109,9 @@ void wlcore_event_sched_scan_completed(struct wl1271 *wl, wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT (status 0x%0x)", status); - if (wl->sched_scanning) { + if (wl->sched_vif) { ieee80211_sched_scan_stopped(wl->hw); - wl->sched_scanning = false; + wl->sched_vif = NULL; } } EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_completed); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 015d769..cce73c4 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -923,11 +923,6 @@ static void wl1271_recovery_work(struct work_struct *work) /* Prevent spurious TX during FW restart */ wlcore_stop_queues(wl, WLCORE_QUEUE_STOP_REASON_FW_RESTART); - if (wl->sched_scanning) { - ieee80211_sched_scan_stopped(wl->hw); - wl->sched_scanning = false; - } - /* reboot the chipset */ while (!list_empty(&wl->wlvif_list)) { wlvif = list_first_entry(&wl->wlvif_list, @@ -1871,7 +1866,6 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) wl->time_offset = 0; wl->ap_fw_ps_map = 0; wl->ap_ps_map = 0; - wl->sched_scanning = false; wl->sleep_auth = WL1271_PSM_ILLEGAL; memset(wl->roles_map, 0, sizeof(wl->roles_map)); memset(wl->links_map, 0, sizeof(wl->links_map)); @@ -2405,6 +2399,11 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, ieee80211_scan_completed(wl->hw, true); } + if (wl->sched_vif == wlvif) { + ieee80211_sched_scan_stopped(wl->hw); + wl->sched_vif = NULL; + } + if (!test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) { /* disable active roles */ ret = wl1271_ps_elp_wakeup(wl); @@ -3439,7 +3438,7 @@ static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw, if (ret < 0) goto out_sleep; - wl->sched_scanning = true; + wl->sched_vif = wlvif; out_sleep: wl1271_ps_elp_sleep(wl); @@ -3928,7 +3927,7 @@ static int wlcore_set_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif, wlvif->band); /* we only support sched_scan while not connected */ - if (wl->sched_scanning) + if (wl->sched_vif == wlvif) wl->ops->sched_scan_stop(wl, wlvif); ret = wl1271_acx_sta_rate_policies(wl, wlvif); @@ -5638,7 +5637,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, wl->ap_fw_ps_map = 0; wl->quirks = 0; wl->platform_quirks = 0; - wl->sched_scanning = false; wl->system_hlid = WL12XX_SYSTEM_HLID; wl->active_sta_count = 0; wl->fwlog_size = 0; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index d3818ef..b315897 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -307,7 +307,7 @@ struct wl1271 { struct ieee80211_vif *roc_vif; struct delayed_work roc_complete_work; - bool sched_scanning; + struct wl12xx_vif *sched_vif; /* The current band */ enum ieee80211_band band; -- cgit v0.10.2 From 6507babab4f7fe6c51c20abedd66d7449b7a9aca Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:24 +0200 Subject: wl18xx: make driver operational again we have done updating the driver to the new fw api, so make the driver operational again. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index f1eaf9a..bb67d70 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1415,10 +1415,6 @@ static int wl18xx_setup(struct wl1271 *wl) struct wl18xx_priv *priv = wl->priv; int ret; - wl1271_error("driver is in transitional commit (due to fw api" - "change) and can't be booted!"); - return -EINVAL; - wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; -- cgit v0.10.2 From 7c482c1040ae54e89a8fd4d6415577070d5a915d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 Nov 2012 18:05:40 +0200 Subject: wlcore: configure dwell times according to scan type Allow configuring different dwell times to the different scan types (regular and scheduled). Add new configuration entry (dwell_time_dfs) to conf_scan_settings, in order to allow setting different values for normal scan and scheduled scan. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 7138fe4..17ee0fd 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -267,8 +267,8 @@ static struct wlcore_conf wl12xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, - .min_dwell_time_passive = 100000, - .max_dwell_time_passive = 100000, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, .num_probe_reqs = 2, .split_scan_timeout = 50000, }, diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c index a99e876..affdb3e 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.c +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -68,9 +68,9 @@ static int wl1271_get_scan_channels(struct wl1271 *wl, cpu_to_le32(c->max_dwell_time_active); } else { channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_passive); + cpu_to_le32(c->dwell_time_passive); channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_passive); + cpu_to_le32(c->dwell_time_passive); } channels[j].early_termination = 0; channels[j].tx_power_att = req->channels[i]->max_power; @@ -364,7 +364,8 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, } if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, - req->n_channels, req->n_ssids)) { + req->n_channels, req->n_ssids, + SCAN_TYPE_PERIODIC)) { wl1271_error("scan channel list is empty"); ret = -EINVAL; goto out; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index bb67d70..c015231 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -394,8 +394,8 @@ static struct wlcore_conf wl18xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, - .min_dwell_time_passive = 100000, - .max_dwell_time_passive = 100000, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, .num_probe_reqs = 2, .split_scan_timeout = 50000, }, diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index f31d0d4..daaebad 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -84,7 +84,8 @@ static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, } wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, - req->n_channels, req->n_ssids); + req->n_channels, req->n_ssids, + SCAN_TYPE_SEARCH); wl18xx_adjust_channels(cmd, cmd_channels); /* @@ -214,7 +215,8 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl, /* configure channels */ wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, - req->n_channels, req->n_ssids); + req->n_channels, req->n_ssids, + SCAN_TYPE_PERIODIC); wl18xx_adjust_channels(cmd, cmd_channels); cmd->short_cycles_sec = 0; diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h index 0e026ec..5eb8c7f 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.h +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -35,13 +35,6 @@ struct tracking_ch_params { u8 padding[2]; } __packed; -enum -{ - SCAN_TYPE_SEARCH = 0, - SCAN_TYPE_PERIODIC = 1, - SCAN_TYPE_TRACKING = 2, -}; - /* probe request rate */ enum { diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index a5d1908..c9de4d5 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -1059,19 +1059,11 @@ struct conf_scan_settings { */ u32 max_dwell_time_active; - /* - * The minimum time to wait on each channel for passive scans - * - * Range: u32 tu/1000 - */ - u32 min_dwell_time_passive; + /* time to wait on the channel for passive scans (in TU/1000) */ + u32 dwell_time_passive; - /* - * The maximum time to wait on each channel for passive scans - * - * Range: u32 tu/1000 - */ - u32 max_dwell_time_passive; + /* time to wait on the channel for DFS scans (in TU/1000) */ + u32 dwell_time_dfs; /* * Number of probe requests to transmit on each active scan channel @@ -1281,7 +1273,7 @@ struct conf_hangover_settings { * version, the two LSB are the lower driver's private conf * version. */ -#define WLCORE_CONF_VERSION (0x0002 << 16) +#define WLCORE_CONF_VERSION (0x0003 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index c913700..7f42f8a 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -97,29 +97,44 @@ wlcore_scan_get_channels(struct wl1271 *wl, struct conn_scan_ch_params *channels, u32 band, bool radar, bool passive, int start, int max_channels, - u8 *n_pactive_ch) + u8 *n_pactive_ch, + int scan_type) { - struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; bool force_passive = !n_ssids; - u32 min_dwell_time_active, max_dwell_time_active, delta_per_probe; + u32 min_dwell_time_active, max_dwell_time_active; u32 dwell_time_passive, dwell_time_dfs; - if (band == IEEE80211_BAND_5GHZ) - delta_per_probe = c->dwell_time_delta_per_probe_5; - else - delta_per_probe = c->dwell_time_delta_per_probe; + /* configure dwell times according to scan type */ + if (scan_type == SCAN_TYPE_SEARCH) { + struct conf_scan_settings *c = &wl->conf.scan; - min_dwell_time_active = c->base_dwell_time + - n_ssids * c->num_probe_reqs * delta_per_probe; + min_dwell_time_active = c->min_dwell_time_active; + max_dwell_time_active = c->max_dwell_time_active; + dwell_time_passive = c->dwell_time_passive; + dwell_time_dfs = c->dwell_time_dfs; + } else { + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + u32 delta_per_probe; + + if (band == IEEE80211_BAND_5GHZ) + delta_per_probe = c->dwell_time_delta_per_probe_5; + else + delta_per_probe = c->dwell_time_delta_per_probe; - max_dwell_time_active = min_dwell_time_active + c->max_dwell_time_delta; + min_dwell_time_active = c->base_dwell_time + + n_ssids * c->num_probe_reqs * delta_per_probe; + max_dwell_time_active = min_dwell_time_active + + c->max_dwell_time_delta; + dwell_time_passive = c->dwell_time_passive; + dwell_time_dfs = c->dwell_time_dfs; + } min_dwell_time_active = DIV_ROUND_UP(min_dwell_time_active, 1000); max_dwell_time_active = DIV_ROUND_UP(max_dwell_time_active, 1000); - dwell_time_passive = DIV_ROUND_UP(c->dwell_time_passive, 1000); - dwell_time_dfs = DIV_ROUND_UP(c->dwell_time_dfs, 1000); + dwell_time_passive = DIV_ROUND_UP(dwell_time_passive, 1000); + dwell_time_dfs = DIV_ROUND_UP(dwell_time_dfs, 1000); for (i = 0, j = start; i < n_channels && j < max_channels; @@ -195,7 +210,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, struct wlcore_scan_channels *cfg, struct ieee80211_channel *channels[], u32 n_channels, - u32 n_ssids) + u32 n_ssids, + int scan_type) { u8 n_pactive_ch = 0; @@ -208,7 +224,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_2GHZ, false, true, 0, MAX_CHANNELS_2GHZ, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->active[0] = wlcore_scan_get_channels(wl, channels, @@ -219,7 +236,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, false, false, cfg->passive[0], MAX_CHANNELS_2GHZ, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->passive[1] = wlcore_scan_get_channels(wl, channels, @@ -229,7 +247,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_5GHZ, false, true, 0, wl->max_channels_5, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->dfs = wlcore_scan_get_channels(wl, channels, @@ -240,7 +259,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, true, true, cfg->passive[1], wl->max_channels_5, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->active[1] = wlcore_scan_get_channels(wl, channels, @@ -251,7 +271,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, false, false, cfg->passive[1] + cfg->dfs, wl->max_channels_5, - &n_pactive_ch); + &n_pactive_ch, + scan_type); /* 802.11j channels are not supported yet */ cfg->passive[2] = 0; diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 8465f35..9ae6065 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -150,12 +150,19 @@ struct wlcore_scan_channels { struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; }; +enum { + SCAN_TYPE_SEARCH = 0, + SCAN_TYPE_PERIODIC = 1, + SCAN_TYPE_TRACKING = 2, +}; + bool wlcore_set_scan_chan_params(struct wl1271 *wl, struct wlcore_scan_channels *cfg, struct ieee80211_channel *channels[], u32 n_channels, - u32 n_ssids); + u32 n_ssids, + int scan_type); int wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, -- cgit v0.10.2 From 5f9b67770be4201f4449b0f180effecaac4e2686 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Mon, 26 Nov 2012 18:05:41 +0200 Subject: wlcore: use new set bandwidth command to adjusting channel BW We support changing the channel BW when we started the STA role on a 40Mhz bandwidth. Otherwise a reconnection is required. Save the started channel width and use it when channel width updates arrive. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c index adff9cd..801d8af 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.c +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -109,3 +109,34 @@ out: kfree(acx); return ret; } + +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide) +{ + struct wlcore_peer_ht_operation_mode *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d", + hlid, wide); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->hlid = hlid; + acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ; + + ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx, + sizeof(*acx)); + + if (ret < 0) { + wl1271_warning("acx peer ht operation mode failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; + +} diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h index 394d125..b57e348 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.h +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -284,10 +284,24 @@ struct wl18xx_acx_clear_statistics { struct acx_header header; }; +enum wlcore_bandwidth { + WLCORE_BANDWIDTH_20MHZ, + WLCORE_BANDWIDTH_40MHZ, +}; + +struct wlcore_peer_ht_operation_mode { + struct acx_header header; + + u8 hlid; + u8 bandwidth; /* enum wlcore_bandwidth */ + u8 padding[2]; +}; + int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, u32 sdio_blk_size, u32 extra_mem_blks, u32 len_field_size); int wl18xx_acx_set_checksum_state(struct wl1271 *wl); int wl18xx_acx_clear_statistics(struct wl1271 *wl); +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide); #endif /* __WL18XX_ACX_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index c015231..c616c21 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1319,6 +1319,43 @@ static u32 wl18xx_pre_pkt_send(struct wl1271 *wl, return buf_offset; } +static void wl18xx_sta_rc_update(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, + u32 changed) +{ + bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); + + if (!(changed & IEEE80211_RC_BW_CHANGED)) + return; + + mutex_lock(&wl->mutex); + + /* sanity */ + if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS)) + goto out; + + /* ignore the change before association */ + if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) + goto out; + + /* + * If we started out as wide, we can change the operation mode. If we + * thought this was a 20mhz AP, we have to reconnect + */ + if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS || + wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS) + wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide); + else + ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif)); + +out: + mutex_unlock(&wl->mutex); +} + + static int wl18xx_setup(struct wl1271 *wl); static struct wlcore_ops wl18xx_ops = { @@ -1354,6 +1391,7 @@ static struct wlcore_ops wl18xx_ops = { .set_key = wl18xx_set_key, .channel_switch = wl18xx_cmd_channel_switch, .pre_pkt_send = wl18xx_pre_pkt_send, + .sta_rc_update = wl18xx_sta_rc_update, }; /* HT cap appropriate for wide channels in 2Ghz */ diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 599c006..65f071d 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -480,6 +480,7 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) goto err_hlid; } + wlvif->sta.role_chan_type = wlvif->channel_type; goto out_free; err_hlid: diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 2673d78..0e0b656 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -201,4 +201,12 @@ wlcore_hw_pre_pkt_send(struct wl1271 *wl, u32 buf_offset, u32 last_len) return buf_offset; } +static inline void +wlcore_hw_sta_rc_update(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, u32 changed) +{ + if (wl->ops->sta_rc_update) + wl->ops->sta_rc_update(wl, wlvif, sta, changed); +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index cce73c4..59ad288 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4948,6 +4948,17 @@ static int wlcore_op_cancel_remain_on_channel(struct ieee80211_hw *hw) return 0; } +static void wlcore_op_sta_rc_update(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + u32 changed) +{ + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + struct wl1271 *wl = hw->priv; + + wlcore_hw_sta_rc_update(wl, wlvif, sta, changed); +} + static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw) { struct wl1271 *wl = hw->priv; @@ -5146,6 +5157,7 @@ static const struct ieee80211_ops wl1271_ops = { .change_chanctx = wlcore_op_change_chanctx, .assign_vif_chanctx = wlcore_op_assign_vif_chanctx, .unassign_vif_chanctx = wlcore_op_unassign_vif_chanctx, + .sta_rc_update = wlcore_op_sta_rc_update, CFG80211_TESTMODE_CMD(wl1271_tm_cmd) }; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index b315897..037c56e 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -101,6 +101,8 @@ struct wlcore_ops { struct wl12xx_vif *wlvif, struct ieee80211_channel_switch *ch_switch); u32 (*pre_pkt_send)(struct wl1271 *wl, u32 buf_offset, u32 last_len); + void (*sta_rc_update)(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, u32 changed); }; enum wlcore_partitions { diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 6be1e8e..e3a77aa 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -341,6 +341,8 @@ struct wl12xx_vif { u8 klv_template_id; bool qos; + /* channel type we started the STA role with */ + enum nl80211_channel_type role_chan_type; } sta; struct { u8 global_hlid; -- cgit v0.10.2 From 847cbebd527c2ba184f1951802d91e043fd81b47 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 Nov 2012 18:05:42 +0200 Subject: wlcore: don't stop fwlog if dbgpins are used Due to a bug, the fw asserts on fw log stop when dbg-pins are used. Don't stop the fw log in this case. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 59ad288..603cafc 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -805,11 +805,13 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl) /* * Make sure the chip is awake and the logger isn't active. - * Do not send a stop fwlog command if the fw is hanged. + * Do not send a stop fwlog command if the fw is hanged or if + * dbgpins are used (due to some fw bug). */ if (wl1271_ps_elp_wakeup(wl)) goto out; - if (!wl->watchdog_recovery) + if (!wl->watchdog_recovery && + wl->conf.fwlog.output != WL12XX_FWLOG_OUTPUT_DBG_PINS) wl12xx_cmd_stop_fwlog(wl); /* Read the first memory block address */ -- cgit v0.10.2 From de40750f4b10aa236ae44a9a3f10f50998e1c345 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Mon, 26 Nov 2012 18:05:44 +0200 Subject: wlcore/wl18xx/wl12xx: separate channel count between chips 18xx chips are capable of staying on 2 channels at the same time. Introduce a chip-family specific parameter to set the number of channels in the interface-combinations published by the driver. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 17ee0fd..97cc79c 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1676,6 +1676,7 @@ static int wl12xx_setup(struct wl1271 *wl) wl->rtable = wl12xx_rtable; wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS; + wl->num_channels = 1; wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES; wl->band_rate_to_idx = wl12xx_band_rate_to_idx; wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index c616c21..18a01b4 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1456,6 +1456,7 @@ static int wl18xx_setup(struct wl1271 *wl) wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; + wl->num_channels = 2; wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES; wl->band_rate_to_idx = wl18xx_band_rate_to_idx; wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 603cafc..4bdf3d7 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5464,10 +5464,9 @@ static const struct ieee80211_iface_limit wlcore_iface_limits[] = { }, }; -static const struct ieee80211_iface_combination +static struct ieee80211_iface_combination wlcore_iface_combinations[] = { { - .num_different_channels = 1, .max_interfaces = 3, .limits = wlcore_iface_limits, .n_limits = ARRAY_SIZE(wlcore_iface_limits), @@ -5570,6 +5569,7 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; /* allowed interface combinations */ + wlcore_iface_combinations[0].num_different_channels = wl->num_channels; wl->hw->wiphy->iface_combinations = wlcore_iface_combinations; wl->hw->wiphy->n_iface_combinations = ARRAY_SIZE(wlcore_iface_combinations); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 037c56e..5f580e5 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -441,6 +441,9 @@ struct wl1271 { unsigned int min_fw_ver[NUM_FW_VER]; struct completion nvs_loading_complete; + + /* number of concurrent channels the HW supports */ + u32 num_channels; }; int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev); -- cgit v0.10.2 From 426001a6aaffce040226a19ad2795ac26c10f942 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 Nov 2012 18:05:45 +0200 Subject: wlcore: use sta_state-based ROCs for AP mode Try an opportunistic ROC when a STA is first added and stop the ROC when the STA is removed or successfully authenticated. This would ensure we don't miss auth/assoc/EAPOL packets during connection Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 4bdf3d7..99ac6c5 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4486,6 +4486,45 @@ static int wl12xx_sta_remove(struct wl1271 *wl, return ret; } +static void wlcore_roc_if_possible(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + if (find_first_bit(wl->roc_map, + WL12XX_MAX_ROLES) < WL12XX_MAX_ROLES) + return; + + if (WARN_ON(wlvif->role_id == WL12XX_INVALID_ROLE_ID)) + return; + + wl12xx_roc(wl, wlvif, wlvif->role_id, wlvif->band, wlvif->channel); +} + +static void wlcore_update_inconn_sta(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct wl1271_station *wl_sta, + bool in_connection) +{ + if (in_connection) { + if (WARN_ON(wl_sta->in_connection)) + return; + wl_sta->in_connection = true; + if (!wlvif->inconn_count++) + wlcore_roc_if_possible(wl, wlvif); + } else { + if (!wl_sta->in_connection) + return; + + wl_sta->in_connection = false; + wlvif->inconn_count--; + if (WARN_ON(wlvif->inconn_count < 0)) + return; + + if (!wlvif->inconn_count) + if (test_bit(wlvif->role_id, wl->roc_map)) + wl12xx_croc(wl, wlvif->role_id); + } +} + static int wl12xx_update_sta_state(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_sta *sta, @@ -4508,6 +4547,8 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, ret = wl12xx_sta_add(wl, wlvif, sta); if (ret) return ret; + + wlcore_update_inconn_sta(wl, wlvif, wl_sta, true); } /* Remove station (AP mode) */ @@ -4516,6 +4557,8 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, new_state == IEEE80211_STA_NOTEXIST) { /* must not fail */ wl12xx_sta_remove(wl, wlvif, sta); + + wlcore_update_inconn_sta(wl, wlvif, wl_sta, false); } /* Authorize station (AP mode) */ @@ -4529,6 +4572,8 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, hlid); if (ret) return ret; + + wlcore_update_inconn_sta(wl, wlvif, wl_sta, false); } /* Authorize station */ diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index e3a77aa..5a92cb2 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -315,6 +315,7 @@ struct wl12xx_rx_filter { struct wl1271_station { u8 hlid; + bool in_connection; }; struct wl12xx_vif { @@ -425,6 +426,9 @@ struct wl12xx_vif { struct delayed_work channel_switch_work; struct delayed_work connection_loss_work; + /* number of in connection stations */ + int inconn_count; + /* * This struct must be last! * data that has to be saved acrossed reconfigs (e.g. recovery) -- cgit v0.10.2 From 873d2a403462b3b495603c0a9a39bd857575aa82 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 Nov 2012 18:05:46 +0200 Subject: wlcore: mask out CCK rates when starting GO mask out CCK rates from the AP's local rates when the interace is p2p interface (GO). Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 65f071d..fc508ee 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -591,6 +591,8 @@ int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif) supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES | wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif); + if (wlvif->p2p) + supported_rates &= ~CONF_TX_CCK_RATES; wl1271_debug(DEBUG_CMD, "cmd role start ap with supported_rates 0x%08x", supported_rates); -- cgit v0.10.2 From 518b680a8eb3ef953c80c9ef1bd6502e107b36fb Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 Nov 2012 18:05:47 +0200 Subject: wlcore: move ps change handling to .bss_info_changed() Adapt the new mac80211 BSS_CHANGED_PS notification, and do the ps handling in mac80211's per-vif callback (.bss_info_changed), rather than in the per-device (.config) callback. Make sure to configure it only after association. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 99ac6c5..5d3ca6c 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2781,46 +2781,8 @@ static void wl1271_set_band_rate(struct wl1271 *wl, struct wl12xx_vif *wlvif) static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_conf *conf, u32 changed) { - bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS); int ret; - if ((changed & IEEE80211_CONF_CHANGE_PS) && !is_ap) { - - if ((conf->flags & IEEE80211_CONF_PS) && - test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) && - !test_bit(WLVIF_FLAG_IN_PS, &wlvif->flags)) { - - int ps_mode; - char *ps_mode_str; - - if (wl->conf.conn.forced_ps) { - ps_mode = STATION_POWER_SAVE_MODE; - ps_mode_str = "forced"; - } else { - ps_mode = STATION_AUTO_PS_MODE; - ps_mode_str = "auto"; - } - - wl1271_debug(DEBUG_PSM, "%s ps enabled", ps_mode_str); - - ret = wl1271_ps_set_mode(wl, wlvif, ps_mode); - - if (ret < 0) - wl1271_warning("enter %s ps failed %d", - ps_mode_str, ret); - - } else if (!(conf->flags & IEEE80211_CONF_PS) && - test_bit(WLVIF_FLAG_IN_PS, &wlvif->flags)) { - - wl1271_debug(DEBUG_PSM, "auto ps disabled"); - - ret = wl1271_ps_set_mode(wl, wlvif, - STATION_ACTIVE_MODE); - if (ret < 0) - wl1271_warning("exit auto ps failed %d", ret); - } - } - if (conf->power_level != wlvif->power_level) { ret = wl1271_acx_tx_power(wl, wlvif, conf->power_level); if (ret < 0) @@ -4115,6 +4077,38 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, } } + if (changed & BSS_CHANGED_PS) { + if ((bss_conf->ps) && + test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) && + !test_bit(WLVIF_FLAG_IN_PS, &wlvif->flags)) { + int ps_mode; + char *ps_mode_str; + + if (wl->conf.conn.forced_ps) { + ps_mode = STATION_POWER_SAVE_MODE; + ps_mode_str = "forced"; + } else { + ps_mode = STATION_AUTO_PS_MODE; + ps_mode_str = "auto"; + } + + wl1271_debug(DEBUG_PSM, "%s ps enabled", ps_mode_str); + + ret = wl1271_ps_set_mode(wl, wlvif, ps_mode); + if (ret < 0) + wl1271_warning("enter %s ps failed %d", + ps_mode_str, ret); + } else if (!bss_conf->ps && + test_bit(WLVIF_FLAG_IN_PS, &wlvif->flags)) { + wl1271_debug(DEBUG_PSM, "auto ps disabled"); + + ret = wl1271_ps_set_mode(wl, wlvif, + STATION_ACTIVE_MODE); + if (ret < 0) + wl1271_warning("exit auto ps failed %d", ret); + } + } + /* Handle new association with HT. Do this after join. */ if (sta_exists && (changed & BSS_CHANGED_HT)) { -- cgit v0.10.2 From c108c90535ae29099de88187a90b8411bc1fe9a1 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 26 Nov 2012 18:05:49 +0200 Subject: wlcore: gather information about firmware stability It's sometimes useful to gather information about the firmware stability in long test runs, especially to see if problems are recurring frequently or not. With this commit we count the number of times a hardware recovery was issued and print it out during recovery and in the driver_state in debugfs. Signed-off-by: Luciano Coelho Signed-off-by: Igal Chernobelsky Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c index 1cf2cdb..e61fc2b 100644 --- a/drivers/net/wireless/ti/wlcore/debugfs.c +++ b/drivers/net/wireless/ti/wlcore/debugfs.c @@ -490,6 +490,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf, DRIVER_STATE_PRINT_HEX(chip.id); DRIVER_STATE_PRINT_STR(chip.fw_ver_str); DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str); + DRIVER_STATE_PRINT_INT(recovery_count); #undef DRIVER_STATE_PRINT_INT #undef DRIVER_STATE_PRINT_LONG diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 5d3ca6c..615b40d 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -879,7 +879,8 @@ static void wlcore_print_recovery(struct wl1271 *wl) if (ret < 0) return; - wl1271_info("pc: 0x%x, hint_sts: 0x%08x", pc, hint_sts); + wl1271_info("pc: 0x%x, hint_sts: 0x%08x count: %d", + pc, hint_sts, ++wl->recovery_count); wlcore_set_partition(wl, &wl->ptable[PART_WORK]); } @@ -5685,6 +5686,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, wl->flags = 0; wl->sg_enabled = true; wl->sleep_auth = WL1271_PSM_ILLEGAL; + wl->recovery_count = 0; wl->hw_pg_ver = -1; wl->ap_ps_map = 0; wl->ap_fw_ps_map = 0; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 5f580e5..4d5c69e 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -337,6 +337,8 @@ struct wl1271 { bool enable_11a; + int recovery_count; + /* Most recently reported noise in dBm */ s8 noise; -- cgit v0.10.2 From 7230341f254c9bce39e9576362f18b94854bc779 Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Mon, 26 Nov 2012 18:05:50 +0200 Subject: wlcore/wl18xx/wl12xx: add recovery settings to conf add support for recovery settings including bug_on_recovery and no_recovery options. These options can now be set using wl18xx-conf.bin file and wlconf tool. Signed-off-by: Yair Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 97cc79c..aa73ada 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -370,6 +370,10 @@ static struct wlcore_conf wl12xx_conf = { .increase_time = 1, .window_size = 16, }, + .recovery = { + .bug_on_recovery = 0, + .no_recovery = 0, + }, }; static struct wl12xx_priv_conf wl12xx_default_priv_conf = { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 18a01b4..98d034b 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -492,6 +492,10 @@ static struct wlcore_conf wl18xx_conf = { .increase_time = 1, .window_size = 16, }, + .recovery = { + .bug_on_recovery = 0, + .no_recovery = 0, + }, }; static struct wl18xx_priv_conf wl18xx_default_priv_conf = { diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index c9de4d5..1bd831c 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -1268,12 +1268,20 @@ struct conf_hangover_settings { u8 window_size; } __packed; +struct conf_recovery_settings { + /* BUG() on fw recovery */ + u8 bug_on_recovery; + + /* Prevent HW recovery. FW will remain stuck. */ + u8 no_recovery; +} __packed; + /* * The conf version consists of 4 bytes. The two MSB are the wlcore * version, the two LSB are the lower driver's private conf * version. */ -#define WLCORE_CONF_VERSION (0x0003 << 16) +#define WLCORE_CONF_VERSION (0x0004 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) @@ -1301,6 +1309,7 @@ struct wlcore_conf { struct conf_fwlog fwlog; struct conf_rate_policy_settings rate; struct conf_hangover_settings hangover; + struct conf_recovery_settings recovery; } __packed; struct wlcore_conf_file { diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 615b40d..4dfd533 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -56,8 +56,8 @@ #define WL1271_BOOT_RETRIES 3 static char *fwlog_param; -static bool bug_on_recovery; -static bool no_recovery; +static int bug_on_recovery = -1; +static int no_recovery = -1; static void __wl1271_op_remove_interface(struct wl1271 *wl, struct ieee80211_vif *vif, @@ -306,6 +306,7 @@ out: static void wlcore_adjust_conf(struct wl1271 *wl) { /* Adjust settings according to optional module parameters */ + if (fwlog_param) { if (!strcmp(fwlog_param, "continuous")) { wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS; @@ -321,6 +322,12 @@ static void wlcore_adjust_conf(struct wl1271 *wl) wl1271_error("Unknown fwlog parameter %s", fwlog_param); } } + + if (bug_on_recovery != -1) + wl->conf.recovery.bug_on_recovery = (u8) bug_on_recovery; + + if (no_recovery != -1) + wl->conf.recovery.no_recovery = (u8) no_recovery; } static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl, @@ -903,10 +910,10 @@ static void wl1271_recovery_work(struct work_struct *work) wlcore_print_recovery(wl); } - BUG_ON(bug_on_recovery && + BUG_ON(wl->conf.recovery.bug_on_recovery && !test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags)); - if (no_recovery) { + if (wl->conf.recovery.no_recovery) { wl1271_info("No recovery (chosen on module load). Fw will remain stuck."); goto out_unlock; } @@ -6013,10 +6020,10 @@ module_param_named(fwlog, fwlog_param, charp, 0); MODULE_PARM_DESC(fwlog, "FW logger options: continuous, ondemand, dbgpins or disable"); -module_param(bug_on_recovery, bool, S_IRUSR | S_IWUSR); +module_param(bug_on_recovery, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(bug_on_recovery, "BUG() on fw recovery"); -module_param(no_recovery, bool, S_IRUSR | S_IWUSR); +module_param(no_recovery, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(no_recovery, "Prevent HW recovery. FW will remain stuck."); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 986f3aa1666b4ef1e9e30672c73e19742b8abfd9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:51:56 +0200 Subject: wlcore/wl12xx: move wl12xx chip ID defines to the lower driver Move wl12xx-specific chip ID macros to the wl12xx driver and rename them to 127X and 128X for clarity since both the "1" (2.4GHz) and the "3" (2.4GHz and 5GHz) variants use the same chip ID. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index aa73ada..82440e1 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -607,7 +607,7 @@ static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len) { int ret; - if (wl->chip.id != CHIP_ID_1283_PG20) { + if (wl->chip.id != CHIP_ID_128X_PG20) { struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; struct wl127x_rx_mem_pool_addr rx_mem_addr; @@ -637,7 +637,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl) int ret = 0; switch (wl->chip.id) { - case CHIP_ID_1271_PG10: + case CHIP_ID_127X_PG10: wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", wl->chip.id); @@ -658,7 +658,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl) WL127X_MINOR_VER); break; - case CHIP_ID_1271_PG20: + case CHIP_ID_127X_PG20: wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", wl->chip.id); @@ -680,7 +680,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl) WL127X_MINOR_VER); break; - case CHIP_ID_1283_PG20: + case CHIP_ID_128X_PG20: wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)", wl->chip.id); wl->plt_fw_name = WL128X_PLT_FW_NAME; @@ -697,7 +697,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl) WL128X_MAJOR_VER, WL128X_SUBTYPE_VER, WL128X_MINOR_VER); break; - case CHIP_ID_1283_PG10: + case CHIP_ID_128X_PG10: default: wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); ret = -ENODEV; @@ -1082,7 +1082,7 @@ static int wl12xx_pre_boot(struct wl1271 *wl) u32 clk; int selected_clock = -1; - if (wl->chip.id == CHIP_ID_1283_PG20) { + if (wl->chip.id == CHIP_ID_128X_PG20) { ret = wl128x_boot_clk(wl, &selected_clock); if (ret < 0) goto out; @@ -1113,7 +1113,7 @@ static int wl12xx_pre_boot(struct wl1271 *wl) wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); - if (wl->chip.id == CHIP_ID_1283_PG20) + if (wl->chip.id == CHIP_ID_128X_PG20) clk |= ((selected_clock & 0x3) << 1) << 4; else clk |= (priv->ref_clock << 1) << 4; @@ -1167,7 +1167,7 @@ static int wl12xx_pre_upload(struct wl1271 *wl) /* WL1271: The reference driver skips steps 7 to 10 (jumps directly * to upload_fw) */ - if (wl->chip.id == CHIP_ID_1283_PG20) { + if (wl->chip.id == CHIP_ID_128X_PG20) { ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA); if (ret < 0) goto out; @@ -1293,7 +1293,7 @@ static void wl12xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, u32 blks, u32 spare_blks) { - if (wl->chip.id == CHIP_ID_1283_PG20) { + if (wl->chip.id == CHIP_ID_128X_PG20) { desc->wl128x_mem.total_mem_blocks = blks; } else { desc->wl127x_mem.extra_blocks = spare_blks; @@ -1307,7 +1307,7 @@ wl12xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, { u32 aligned_len = wlcore_calc_packet_alignment(wl, skb->len); - if (wl->chip.id == CHIP_ID_1283_PG20) { + if (wl->chip.id == CHIP_ID_128X_PG20) { desc->wl128x_mem.extra_bytes = aligned_len - skb->len; desc->length = cpu_to_le16(aligned_len >> 2); @@ -1371,7 +1371,7 @@ static int wl12xx_hw_init(struct wl1271 *wl) { int ret; - if (wl->chip.id == CHIP_ID_1283_PG20) { + if (wl->chip.id == CHIP_ID_128X_PG20) { u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE; ret = wl128x_cmd_general_parms(wl); @@ -1458,7 +1458,7 @@ static bool wl12xx_mac_in_fuse(struct wl1271 *wl) bool supported = false; u8 major, minor; - if (wl->chip.id == CHIP_ID_1283_PG20) { + if (wl->chip.id == CHIP_ID_128X_PG20) { major = WL128X_PG_GET_MAJOR(wl->hw_pg_ver); minor = WL128X_PG_GET_MINOR(wl->hw_pg_ver); @@ -1514,7 +1514,7 @@ static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver) u16 die_info; int ret; - if (wl->chip.id == CHIP_ID_1283_PG20) + if (wl->chip.id == CHIP_ID_128X_PG20) ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1, &die_info); else diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 7182bbf..634ad00 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -24,6 +24,12 @@ #include "conf.h" +/* WiLink 6/7 chip IDs */ +#define CHIP_ID_127X_PG10 (0x04030101) +#define CHIP_ID_127X_PG20 (0x04030111) +#define CHIP_ID_128X_PG10 (0x05030101) +#define CHIP_ID_128X_PG20 (0x05030111) + /* minimum FW required for driver for wl127x */ #define WL127X_CHIP_VER 6 #define WL127X_IFTYPE_VER 3 diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 4d5c69e..c28e891 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -520,12 +520,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, #define WLCORE_QUIRK_REGDOMAIN_CONF BIT(11) -/* TODO: move to the lower drivers when all usages are abstracted */ -#define CHIP_ID_1271_PG10 (0x4030101) -#define CHIP_ID_1271_PG20 (0x4030111) -#define CHIP_ID_1283_PG10 (0x05030101) -#define CHIP_ID_1283_PG20 (0x05030111) - /* TODO: move all these common registers and values elsewhere */ #define HW_ACCESS_ELP_CTRL_REG 0x1FFFC -- cgit v0.10.2 From c3552c06256cf7ac787ab8db0d3c8317be48bba1 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:51:57 +0200 Subject: wlcore/wl12xx: remove deprecated FW version check We don't distinguish between STA and AP firmwares anymore, so the firmware version checking and quirks setting in wl12xx isn't needed anymore. Remove implementation of .identify_fw in wl12xx and deprecated definitions. Don't remove the op entirely from wlcore, because it may be needed for more fine-grained checking later. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 82440e1..07f7f76 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1426,22 +1426,6 @@ static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl, return wlvif->rate_set; } -static int wl12xx_identify_fw(struct wl1271 *wl) -{ - unsigned int *fw_ver = wl->chip.fw_ver; - - /* Only new station firmwares support routing fw logs to the host */ - if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) && - (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN)) - wl->quirks |= WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED; - - /* This feature is not yet supported for AP mode */ - if (fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP) - wl->quirks |= WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED; - - return 0; -} - static void wl12xx_conf_init(struct wl1271 *wl) { struct wl12xx_priv *priv = wl->priv; @@ -1626,7 +1610,6 @@ static int wl12xx_setup(struct wl1271 *wl); static struct wlcore_ops wl12xx_ops = { .setup = wl12xx_setup, .identify_chip = wl12xx_identify_chip, - .identify_fw = wl12xx_identify_fw, .boot = wl12xx_boot, .plt_init = wl12xx_plt_init, .trigger_cmd = wl12xx_trigger_cmd, diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 5a92cb2..d6854b9 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -109,17 +109,6 @@ enum { NUM_FW_VER }; -#define FW_VER_CHIP_WL127X 6 -#define FW_VER_CHIP_WL128X 7 - -#define FW_VER_IF_TYPE_STA 1 -#define FW_VER_IF_TYPE_AP 2 - -#define FW_VER_MINOR_1_SPARE_STA_MIN 58 -#define FW_VER_MINOR_1_SPARE_AP_MIN 47 - -#define FW_VER_MINOR_FWLOG_STA_MIN 70 - struct wl1271_chip { u32 id; char fw_ver_str[ETHTOOL_BUSINFO_LEN]; -- cgit v0.10.2 From af4e94c56581b446b2010854a983ef722ad9ed1f Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:51:58 +0200 Subject: wlcore: change way of checking the firmware version The firmwares version string contain 5 integers. We used to consider all the digits (except for the first one, which indicates the chip) as linearly increasing version numbers. This is not correct, because some of the integers indicate type of firmware (eg. single-role vs. multi-role) or the internal project it was created for. Besides, this varies a bit from chip to chip, so we need to make the firmware version checks more flexible (eg. allow the lower driver to ignore some of the integers). Additionally, we need to change the code so that we only check for a linearly increasing number on the fields where this actually makes sense. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index 230c765..2c57246 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -85,46 +85,55 @@ static int wlcore_validate_fw_ver(struct wl1271 *wl) { unsigned int *fw_ver = wl->chip.fw_ver; unsigned int *min_ver = wl->min_fw_ver; + char min_fw_str[32] = ""; + int i; /* the chip must be exactly equal */ - if (min_ver[FW_VER_CHIP] != fw_ver[FW_VER_CHIP]) + if ((min_ver[FW_VER_CHIP] != WLCORE_FW_VER_IGNORE) && + (min_ver[FW_VER_CHIP] != fw_ver[FW_VER_CHIP])) goto fail; - /* always check the next digit if all previous ones are equal */ - - if (min_ver[FW_VER_IF_TYPE] < fw_ver[FW_VER_IF_TYPE]) - goto out; - else if (min_ver[FW_VER_IF_TYPE] > fw_ver[FW_VER_IF_TYPE]) + /* the firmware type must be equal */ + if ((min_ver[FW_VER_IF_TYPE] != WLCORE_FW_VER_IGNORE) && + (min_ver[FW_VER_IF_TYPE] != fw_ver[FW_VER_IF_TYPE])) goto fail; - if (min_ver[FW_VER_MAJOR] < fw_ver[FW_VER_MAJOR]) - goto out; - else if (min_ver[FW_VER_MAJOR] > fw_ver[FW_VER_MAJOR]) + /* the project number must be equal */ + if ((min_ver[FW_VER_SUBTYPE] != WLCORE_FW_VER_IGNORE) && + (min_ver[FW_VER_SUBTYPE] != fw_ver[FW_VER_SUBTYPE])) goto fail; - if (min_ver[FW_VER_SUBTYPE] < fw_ver[FW_VER_SUBTYPE]) - goto out; - else if (min_ver[FW_VER_SUBTYPE] > fw_ver[FW_VER_SUBTYPE]) + /* the API version must be greater or equal */ + if ((min_ver[FW_VER_MAJOR] != WLCORE_FW_VER_IGNORE) && + (min_ver[FW_VER_MAJOR] > fw_ver[FW_VER_MAJOR])) goto fail; - if (min_ver[FW_VER_MINOR] < fw_ver[FW_VER_MINOR]) - goto out; - else if (min_ver[FW_VER_MINOR] > fw_ver[FW_VER_MINOR]) + /* if the API version is equal... */ + if (((min_ver[FW_VER_MAJOR] == WLCORE_FW_VER_IGNORE) || + (min_ver[FW_VER_MAJOR] == fw_ver[FW_VER_MAJOR])) && + /* ...the minor must be greater or equal */ + ((min_ver[FW_VER_MINOR] != WLCORE_FW_VER_IGNORE) && + (min_ver[FW_VER_MINOR] > fw_ver[FW_VER_MINOR]))) goto fail; -out: return 0; fail: - wl1271_error("Your WiFi FW version (%u.%u.%u.%u.%u) is outdated.\n" - "Please use at least FW %u.%u.%u.%u.%u.\n" - "You can get more information at:\n" - "http://wireless.kernel.org/en/users/Drivers/wl12xx", + for (i = 0; i < NUM_FW_VER; i++) + if (min_ver[i] == WLCORE_FW_VER_IGNORE) + snprintf(min_fw_str, sizeof(min_fw_str), + "%s*.", min_fw_str); + else + snprintf(min_fw_str, sizeof(min_fw_str), + "%s%u.", min_fw_str, min_ver[i]); + + wl1271_error("Your WiFi FW version (%u.%u.%u.%u.%u) is invalid.\n" + "Please use at least FW %s\n" + "You can get the latest firmwares at:\n" + "git://github.com/TI-OpenLink/firmwares.git", fw_ver[FW_VER_CHIP], fw_ver[FW_VER_IF_TYPE], fw_ver[FW_VER_MAJOR], fw_ver[FW_VER_SUBTYPE], - fw_ver[FW_VER_MINOR], min_ver[FW_VER_CHIP], - min_ver[FW_VER_IF_TYPE], min_ver[FW_VER_MAJOR], - min_ver[FW_VER_SUBTYPE], min_ver[FW_VER_MINOR]); + fw_ver[FW_VER_MINOR], min_fw_str); return -EINVAL; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index c28e891..66b8306 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -466,6 +466,9 @@ wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band, memcpy(&wl->ht_cap[band], ht_cap, sizeof(*ht_cap)); } +/* Tell wlcore not to care about this element when checking the version */ +#define WLCORE_FW_VER_IGNORE -1 + static inline void wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, unsigned int iftype, unsigned int major, -- cgit v0.10.2 From b3ec9cf2052981171364c4f354f53a64089ecc75 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:51:59 +0200 Subject: wl12xx: ignore some of the firmware version fields The firmware type and the project number fields in the firmware version number, cannot be checked as if they increase sequentially, because the former is the firmware type and the latter is an internal project number. There's no guarantee that these numbers will remain incremental, so use WLCORE_FW_VER_IGNORE. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 634ad00..310df52 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -32,16 +32,16 @@ /* minimum FW required for driver for wl127x */ #define WL127X_CHIP_VER 6 -#define WL127X_IFTYPE_VER 3 +#define WL127X_IFTYPE_VER WLCORE_FW_VER_IGNORE #define WL127X_MAJOR_VER 10 -#define WL127X_SUBTYPE_VER 2 +#define WL127X_SUBTYPE_VER WLCORE_FW_VER_IGNORE #define WL127X_MINOR_VER 115 /* minimum FW required for driver for wl128x */ #define WL128X_CHIP_VER 7 -#define WL128X_IFTYPE_VER 3 +#define WL128X_IFTYPE_VER WLCORE_FW_VER_IGNORE #define WL128X_MAJOR_VER 10 -#define WL128X_SUBTYPE_VER 2 +#define WL128X_SUBTYPE_VER WLCORE_FW_VER_IGNORE #define WL128X_MINOR_VER 115 #define WL12XX_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) -- cgit v0.10.2 From 8675f9abdf5b67a3f621fa99e1f0e0c8d8ae2531 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:52:00 +0200 Subject: wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions Previously we were only checking the single-role firmware version. Now add code to check for the firmware versions separately for each firmware type. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 07f7f76..37e577f 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -653,9 +653,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) /* read data preparation is only needed by wl127x */ wl->ops->prepare_read = wl127x_prepare_read; - wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, WL127X_IFTYPE_VER, - WL127X_MAJOR_VER, WL127X_SUBTYPE_VER, - WL127X_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, + WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, + WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, + WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, + WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); break; case CHIP_ID_127X_PG20: @@ -675,9 +677,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) /* read data preparation is only needed by wl127x */ wl->ops->prepare_read = wl127x_prepare_read; - wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, WL127X_IFTYPE_VER, - WL127X_MAJOR_VER, WL127X_SUBTYPE_VER, - WL127X_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, + WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, + WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, + WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, + WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); break; case CHIP_ID_128X_PG20: @@ -693,9 +697,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_TKIP_HEADER_SPACE | WLCORE_QUIRK_START_STA_FAILS; - wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, WL128X_IFTYPE_VER, - WL128X_MAJOR_VER, WL128X_SUBTYPE_VER, - WL128X_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, + WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER, + WL128X_SUBTYPE_SR_VER, WL128X_MINOR_SR_VER, + WL128X_IFTYPE_MR_VER, WL128X_MAJOR_MR_VER, + WL128X_SUBTYPE_MR_VER, WL128X_MINOR_MR_VER); break; case CHIP_ID_128X_PG10: default: diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 310df52..a07be5e 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -30,19 +30,31 @@ #define CHIP_ID_128X_PG10 (0x05030101) #define CHIP_ID_128X_PG20 (0x05030111) -/* minimum FW required for driver for wl127x */ +/* FW chip version for wl127x */ #define WL127X_CHIP_VER 6 -#define WL127X_IFTYPE_VER WLCORE_FW_VER_IGNORE -#define WL127X_MAJOR_VER 10 -#define WL127X_SUBTYPE_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_VER 115 +/* minimum single-role FW version for wl127x */ +#define WL127X_IFTYPE_SR_VER 3 +#define WL127X_MAJOR_SR_VER 10 +#define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE +#define WL127X_MINOR_SR_VER 115 +/* minimum multi-role FW version for wl127x */ +#define WL127X_IFTYPE_MR_VER 5 +#define WL127X_MAJOR_MR_VER 7 +#define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE +#define WL127X_MINOR_MR_VER 115 -/* minimum FW required for driver for wl128x */ +/* FW chip version for wl128x */ #define WL128X_CHIP_VER 7 -#define WL128X_IFTYPE_VER WLCORE_FW_VER_IGNORE -#define WL128X_MAJOR_VER 10 -#define WL128X_SUBTYPE_VER WLCORE_FW_VER_IGNORE -#define WL128X_MINOR_VER 115 +/* minimum single-role FW version for wl128x */ +#define WL128X_IFTYPE_SR_VER 3 +#define WL128X_MAJOR_SR_VER 10 +#define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE +#define WL128X_MINOR_SR_VER 115 +/* minimum multi-role FW version for wl128x */ +#define WL128X_IFTYPE_MR_VER 5 +#define WL128X_MAJOR_MR_VER 7 +#define WL128X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE +#define WL128X_MINOR_MR_VER 42 #define WL12XX_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 98d034b..08c3a2f 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -623,9 +623,11 @@ static int wl18xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_REGDOMAIN_CONF | WLCORE_QUIRK_DUAL_PROBE_TMPL; - wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, - WL18XX_MAJOR_VER, WL18XX_SUBTYPE_VER, - WL18XX_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, + WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER, + WL18XX_SUBTYPE_VER, WL18XX_MINOR_VER, + /* there's no separate multi-role FW */ + 0, 0, 0, 0); break; case CHIP_ID_185x_PG10: wl1271_warning("chip id 0x%x (185x PG10) is deprecated", diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index 2c57246..b58ae5f 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -84,7 +84,8 @@ out: static int wlcore_validate_fw_ver(struct wl1271 *wl) { unsigned int *fw_ver = wl->chip.fw_ver; - unsigned int *min_ver = wl->min_fw_ver; + unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ? + wl->min_sr_fw_ver : wl->min_mr_fw_ver; char min_fw_str[32] = ""; int i; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 66b8306..32987d0 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -439,8 +439,11 @@ struct wl1271 { /* the number of allocated MAC addresses in this chip */ int num_mac_addr; - /* the minimum FW version required for the driver to work */ - unsigned int min_fw_ver[NUM_FW_VER]; + /* minimum FW version required for the driver to work in single-role */ + unsigned int min_sr_fw_ver[NUM_FW_VER]; + + /* minimum FW version required for the driver to work in multi-role */ + unsigned int min_mr_fw_ver[NUM_FW_VER]; struct completion nvs_loading_complete; @@ -471,14 +474,22 @@ wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band, static inline void wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, - unsigned int iftype, unsigned int major, - unsigned int subtype, unsigned int minor) + unsigned int iftype_sr, unsigned int major_sr, + unsigned int subtype_sr, unsigned int minor_sr, + unsigned int iftype_mr, unsigned int major_mr, + unsigned int subtype_mr, unsigned int minor_mr) { - wl->min_fw_ver[FW_VER_CHIP] = chip; - wl->min_fw_ver[FW_VER_IF_TYPE] = iftype; - wl->min_fw_ver[FW_VER_MAJOR] = major; - wl->min_fw_ver[FW_VER_SUBTYPE] = subtype; - wl->min_fw_ver[FW_VER_MINOR] = minor; + wl->min_sr_fw_ver[FW_VER_CHIP] = chip; + wl->min_sr_fw_ver[FW_VER_IF_TYPE] = iftype_sr; + wl->min_sr_fw_ver[FW_VER_MAJOR] = major_sr; + wl->min_sr_fw_ver[FW_VER_SUBTYPE] = subtype_sr; + wl->min_sr_fw_ver[FW_VER_MINOR] = minor_sr; + + wl->min_mr_fw_ver[FW_VER_CHIP] = chip; + wl->min_mr_fw_ver[FW_VER_IF_TYPE] = iftype_mr; + wl->min_mr_fw_ver[FW_VER_MAJOR] = major_mr; + wl->min_mr_fw_ver[FW_VER_SUBTYPE] = subtype_mr; + wl->min_mr_fw_ver[FW_VER_MINOR] = minor_mr; } /* Firmware image load chunk size */ -- cgit v0.10.2 From 2f24456149110f4d9f0547429f1249d40143561d Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:52:01 +0200 Subject: wl18xx: ignore irrelevant firmware version fields For wl18xx, only the chip ID and the minor version number are relevant. Ignore the other numbers which are either not used or relate to internal projects or internal branches. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 4d295a5..3105fbf 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -27,8 +27,8 @@ /* minimum FW required for driver */ #define WL18XX_CHIP_VER 8 #define WL18XX_IFTYPE_VER 5 -#define WL18XX_MAJOR_VER 0 -#define WL18XX_SUBTYPE_VER 0 +#define WL18XX_MAJOR_VER WLCORE_FW_VER_IGNORE +#define WL18XX_SUBTYPE_VER WLCORE_FW_VER_IGNORE #define WL18XX_MINOR_VER 28 #define WL18XX_CMD_MAX_SIZE 740 -- cgit v0.10.2 From 3ea186d137f79da5e6af283e5803715da1eb6259 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Fri, 30 Nov 2012 00:50:06 +0200 Subject: wlcore/wl12xx: make sure session id is always zero for AP The 12xx FW doesn't support non-zero session ids for AP-mode. Introduce an appropriate quirk to make sure the session id is always zero when needed. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 37e577f..d22b52f 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -644,7 +644,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | WLCORE_QUIRK_DUAL_PROBE_TMPL | WLCORE_QUIRK_TKIP_HEADER_SPACE | - WLCORE_QUIRK_START_STA_FAILS; + WLCORE_QUIRK_START_STA_FAILS | + WLCORE_QUIRK_AP_ZERO_SESSION_ID; wl->sr_fw_name = WL127X_FW_NAME_SINGLE; wl->mr_fw_name = WL127X_FW_NAME_MULTI; memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x, @@ -667,7 +668,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | WLCORE_QUIRK_DUAL_PROBE_TMPL | WLCORE_QUIRK_TKIP_HEADER_SPACE | - WLCORE_QUIRK_START_STA_FAILS; + WLCORE_QUIRK_START_STA_FAILS | + WLCORE_QUIRK_AP_ZERO_SESSION_ID; wl->plt_fw_name = WL127X_PLT_FW_NAME; wl->sr_fw_name = WL127X_FW_NAME_SINGLE; wl->mr_fw_name = WL127X_FW_NAME_MULTI; @@ -695,7 +697,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_DUAL_PROBE_TMPL | WLCORE_QUIRK_TKIP_HEADER_SPACE | - WLCORE_QUIRK_START_STA_FAILS; + WLCORE_QUIRK_START_STA_FAILS | + WLCORE_QUIRK_AP_ZERO_SESSION_ID; wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER, diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 68f73f9..c3607f0 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -293,9 +293,14 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct wl12xx_vif *wlvif, tx_attr |= TX_HW_ATTR_TX_DUMMY_REQ; } else if (wlvif) { + u8 session_id = wl->session_ids[hlid]; + + if ((wl->quirks & WLCORE_QUIRK_AP_ZERO_SESSION_ID) && + (wlvif->bss_type == BSS_TYPE_AP_BSS)) + session_id = 0; + /* configure the tx attributes */ - tx_attr = wl->session_ids[hlid] << - TX_HW_ATTR_OFST_SESSION_COUNTER; + tx_attr = session_id << TX_HW_ATTR_OFST_SESSION_COUNTER; } desc->hlid = hlid; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 32987d0..d90436d 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -533,6 +533,8 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* Firmware requires reg domain configuration for active calibration */ #define WLCORE_QUIRK_REGDOMAIN_CONF BIT(11) +/* The FW only support a zero session id for AP */ +#define WLCORE_QUIRK_AP_ZERO_SESSION_ID BIT(12) /* TODO: move all these common registers and values elsewhere */ #define HW_ACCESS_ELP_CTRL_REG 0x1FFFC -- cgit v0.10.2 From ec4f4b76a622822d5d47e99bf4062fc308a7d424 Mon Sep 17 00:00:00 2001 From: Ido Reis Date: Tue, 27 Nov 2012 08:44:42 +0200 Subject: wl18xx: update default mac/phy parameters Update mac/phy paramters according to the default HP SISO boards. Signed-off-by: Ido Reis Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index 4d426cc..1cb313f 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,20 +23,21 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0003) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0004) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) #define NUM_OF_CHANNELS_11_ABG 150 #define NUM_OF_CHANNELS_11_P 7 -#define WL18XX_NUM_OF_SUB_BANDS 9 #define SRF_TABLE_LEN 16 #define PIN_MUXING_SIZE 2 +#define WL18XX_TRACE_LOSS_GAPS_TX 10 +#define WL18XX_TRACE_LOSS_GAPS_RX 18 struct wl18xx_mac_and_phy_params { u8 phy_standalone; - u8 rdl; + u8 spare0; u8 enable_clpc; u8 enable_tx_low_pwr_on_siso_rdl; u8 auto_detect; @@ -69,8 +70,8 @@ struct wl18xx_mac_and_phy_params { u8 pwr_limit_reference_11_abg; u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; u8 pwr_limit_reference_11p; - u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS]; - u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS]; + u8 spare1[9]; + u8 spare2[9]; u8 primary_clock_setting_time; u8 clock_valid_on_wake_up; u8 secondary_clock_setting_time; @@ -81,7 +82,11 @@ struct wl18xx_mac_and_phy_params { s8 low_power_val; s8 med_power_val; s8 high_power_val; - u8 padding[1]; + s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; + s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; + u8 tx_rf_margin; + + u8 padding[4]; } __packed; enum wl18xx_ht_mode { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 08c3a2f..3588e34 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -508,7 +508,6 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .clock_valid_on_wake_up = 0x00, .secondary_clock_setting_time = 0x05, .board_type = BOARD_TYPE_HDK_18XX, - .rdl = 0x01, .auto_detect = 0x00, .dedicated_fem = FEM_NONE, .low_band_component = COMPONENT_3_WAY_SWITCH, @@ -525,13 +524,15 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .enable_tx_low_pwr_on_siso_rdl = 0x00, .rx_profile = 0x00, .pwr_limit_reference_11_abg = 0xc8, + .pwr_limit_reference_11p = 0xc8, .psat = 0, .low_power_val = 0x00, .med_power_val = 0x0a, - .high_power_val = 0x1e, + .high_power_val = 0x11, .external_pa_dc2dc = 0, .number_of_assembled_ant2_4 = 1, .number_of_assembled_ant5 = 1, + .tx_rf_margin = 1, }, }; -- cgit v0.10.2 From d88949b7def1e982871406f3ad3efa361ffa6ffc Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Tue, 27 Nov 2012 08:44:43 +0200 Subject: wl18xx: support 2nd set of mac/phy tx-power params First set (low, medium and high TX power values) is used for STA-HP background role. The 2nd set is used for other roles. Update other mac/phy parameters according to new FW. Signed-off-by: Yair Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho Conflicts: drivers/net/wireless/ti/wl18xx/main.c diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index 1cb313f..b5f1148 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,7 +23,7 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0004) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) @@ -78,15 +78,19 @@ struct wl18xx_mac_and_phy_params { u8 board_type; /* enable point saturation */ u8 psat; - /* low/medium/high Tx power in dBm */ + /* low/medium/high Tx power in dBm for STA-HP BG */ s8 low_power_val; s8 med_power_val; s8 high_power_val; s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; u8 tx_rf_margin; + /* low/medium/high Tx power in dBm for other role */ + s8 low_power_val_2nd; + s8 med_power_val_2nd; + s8 high_power_val_2nd; - u8 padding[4]; + u8 padding[1]; } __packed; enum wl18xx_ht_mode { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 3588e34..a45ecff 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -523,14 +523,37 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .enable_clpc = 0x00, .enable_tx_low_pwr_on_siso_rdl = 0x00, .rx_profile = 0x00, - .pwr_limit_reference_11_abg = 0xc8, - .pwr_limit_reference_11p = 0xc8, + .pwr_limit_reference_11_abg = 0x64, + .per_chan_pwr_limit_arr_11abg = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, + .pwr_limit_reference_11p = 0x64, + .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff }, .psat = 0, - .low_power_val = 0x00, - .med_power_val = 0x0a, - .high_power_val = 0x11, + .low_power_val = 0x08, + .med_power_val = 0x12, + .high_power_val = 0x18, + .low_power_val_2nd = 0x05, + .med_power_val_2nd = 0x0a, + .high_power_val_2nd = 0x14, .external_pa_dc2dc = 0, - .number_of_assembled_ant2_4 = 1, + .number_of_assembled_ant2_4 = 2, .number_of_assembled_ant5 = 1, .tx_rf_margin = 1, }, -- cgit v0.10.2 From ea5084356fb05093da9ff225fd2c2fcfd363371c Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Nov 2012 08:44:45 +0200 Subject: wlcore: allow fw commands to fail Currently, each fw command/acx that return a status code different than CMD_STATUS_SUCCESS will trigger a recovery in the driver. However, it is a valid for some fw commands to fail (e.g. due to temporary lack of resources), so add new functions that allow passing bitmap of valid error return values. (make the current wl1271_cmd_send/wl1271_cmd_configure wrappers around the new functions, in order to avoid changing the whole driver) Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index fc508ee..ead19c9 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -48,14 +48,15 @@ * @id: command id * @buf: buffer containing the command, must work with dma * @len: length of the buffer + * return the cmd status code on success. */ -int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, - size_t res_len) +static int __wlcore_cmd_send(struct wl1271 *wl, u16 id, void *buf, + size_t len, size_t res_len) { struct wl1271_cmd_header *cmd; unsigned long timeout; u32 intr; - int ret = 0; + int ret; u16 status; u16 poll_count = 0; @@ -71,7 +72,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, ret = wlcore_write(wl, wl->cmd_box_addr, buf, len, false); if (ret < 0) - goto fail; + return ret; /* * TODO: we just need this because one bit is in a different @@ -79,19 +80,18 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, */ ret = wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len); if (ret < 0) - goto fail; + return ret; timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr); if (ret < 0) - goto fail; + return ret; while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { if (time_after(jiffies, timeout)) { wl1271_error("command complete timeout"); - ret = -ETIMEDOUT; - goto fail; + return -ETIMEDOUT; } poll_count++; @@ -102,7 +102,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr); if (ret < 0) - goto fail; + return ret; } /* read back the status code of the command */ @@ -111,22 +111,40 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, ret = wlcore_read(wl, wl->cmd_box_addr, cmd, res_len, false); if (ret < 0) - goto fail; + return ret; status = le16_to_cpu(cmd->status); - if (status != CMD_STATUS_SUCCESS) { - wl1271_error("command execute failure %d", status); - ret = -EIO; - goto fail; - } ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK, WL1271_ACX_INTR_CMD_COMPLETE); if (ret < 0) + return ret; + + return status; +} + +/* + * send command to fw and return cmd status on success + * valid_rets contains a bitmap of allowed error codes + */ +int wlcore_cmd_send_failsafe(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len, unsigned long valid_rets) +{ + int ret = __wlcore_cmd_send(wl, id, buf, len, res_len); + + if (ret < 0) goto fail; - return 0; + /* success is always a valid status */ + valid_rets |= BIT(CMD_STATUS_SUCCESS); + if (ret >= MAX_COMMAND_STATUS || + !test_bit(ret, &valid_rets)) { + wl1271_error("command execute failure %d", ret); + ret = -EIO; + goto fail; + } + return ret; fail: wl12xx_queue_recovery_work(wl); return ret; @@ -134,6 +152,20 @@ fail: EXPORT_SYMBOL_GPL(wl1271_cmd_send); /* + * wrapper for wlcore_cmd_send that accept only CMD_STATUS_SUCCESS + * return 0 on success. + */ +int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len) +{ + int ret = wlcore_cmd_send_failsafe(wl, id, buf, len, res_len, 0); + + if (ret < 0) + return ret; + return 0; +} + +/* * Poll the mailbox event field until any of the bits in the mask is set or a * timeout occurs (WL1271_EVENT_TIMEOUT in msecs) */ @@ -791,8 +823,11 @@ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) * @id: acx id * @buf: buffer containing acx, including all headers, must work with dma * @len: length of buf + * @valid_rets: bitmap of valid cmd status codes (i.e. return values). + * return the cmd status on success. */ -int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) +int wlcore_cmd_configure_failsafe(struct wl1271 *wl, u16 id, void *buf, + size_t len, unsigned long valid_rets) { struct acx_header *acx = buf; int ret; @@ -804,12 +839,26 @@ int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) /* payload length, does not include any headers */ acx->len = cpu_to_le16(len - sizeof(*acx)); - ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0); + ret = wlcore_cmd_send_failsafe(wl, CMD_CONFIGURE, acx, len, 0, + valid_rets); if (ret < 0) { wl1271_warning("CONFIGURE command NOK"); return ret; } + return ret; +} + +/* + * wrapper for wlcore_cmd_configure that accepts only success status. + * return 0 on success + */ +int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) +{ + int ret = wlcore_cmd_configure_failsafe(wl, id, buf, len, 0); + + if (ret < 0) + return ret; return 0; } EXPORT_SYMBOL_GPL(wl1271_cmd_configure); diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 7f378b7..fd34123 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -31,6 +31,8 @@ struct acx_header; int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, size_t res_len); +int wlcore_cmd_send_failsafe(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len, unsigned long valid_rets); int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type, u8 *role_id); int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id); @@ -45,6 +47,8 @@ int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif); int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer); int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len); int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len); +int wlcore_cmd_configure_failsafe(struct wl1271 *wl, u16 id, void *buf, + size_t len, unsigned long valid_rets); int wl1271_cmd_data_path(struct wl1271 *wl, bool enable); int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 ps_mode, u16 auto_ps_timeout); @@ -234,7 +238,8 @@ enum { CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/ CMD_STATUS_TEMPLATE_OOM = 23, CMD_STATUS_NO_RX_BA_SESSION = 24, - MAX_COMMAND_STATUS = 0xff + + MAX_COMMAND_STATUS }; #define CMDMBOX_HEADER_LEN 4 -- cgit v0.10.2 From 3b44b3b3687534be24171db6ff80669b3a6dcbab Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Nov 2012 08:44:46 +0200 Subject: wlcore: allow ACX_BA_SESSION_RX_SETUP to fail Under some circumstances, that fw might be asked to remove a rx ba sessions it doesn't know about. In this case, instead of triggering a recovery, accept the error code (CMD_STATUS_NO_RX_BA_SESSION) and ignore it. [Arik - indicate failure up when the BA session cannot be setup] Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c index ce108a7..9c32f0c 100644 --- a/drivers/net/wireless/ti/wlcore/acx.c +++ b/drivers/net/wireless/ti/wlcore/acx.c @@ -1433,13 +1433,22 @@ int wl12xx_acx_set_ba_receiver_session(struct wl1271 *wl, u8 tid_index, acx->win_size = wl->conf.ht.rx_ba_win_size; acx->ssn = ssn; - ret = wl1271_cmd_configure(wl, ACX_BA_SESSION_RX_SETUP, acx, - sizeof(*acx)); + ret = wlcore_cmd_configure_failsafe(wl, ACX_BA_SESSION_RX_SETUP, acx, + sizeof(*acx), + BIT(CMD_STATUS_NO_RX_BA_SESSION)); if (ret < 0) { wl1271_warning("acx ba receiver session failed: %d", ret); goto out; } + /* sometimes we can't start the session */ + if (ret == CMD_STATUS_NO_RX_BA_SESSION) { + wl1271_warning("no fw rx ba on tid %d", tid_index); + ret = -EBUSY; + goto out; + } + + ret = 0; out: kfree(acx); return ret; -- cgit v0.10.2 From 2718bf409937655f9b0bbc174faee3ac2ecf1062 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Nov 2012 08:44:47 +0200 Subject: wlcore: remove WLCORE_QUIRK_NO_ELP all the current firmwares support elp, so we can safely remove WLCORE_QUIRK_NO_ELP. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a45ecff..4621d67 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -639,8 +639,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl) wl->sr_fw_name = WL18XX_FW_NAME; /* wl18xx uses the same firmware for PLT */ wl->plt_fw_name = WL18XX_FW_NAME; - wl->quirks |= WLCORE_QUIRK_NO_ELP | - WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | + wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | WLCORE_QUIRK_TX_PAD_LAST_FRAME | diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 68828b4..5c6f11e 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -577,9 +577,6 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif) /* Configure for power according to debugfs */ if (sta_auth != WL1271_PSM_ILLEGAL) ret = wl1271_acx_sleep_auth(wl, sta_auth); - /* Configure for power always on */ - else if (wl->quirks & WLCORE_QUIRK_NO_ELP) - ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); /* Configure for ELP power saving */ else ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index a163b09..1b42cb3 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2482,9 +2482,6 @@ deinit: /* Configure for power according to debugfs */ if (sta_auth != WL1271_PSM_ILLEGAL) wl1271_acx_sleep_auth(wl, sta_auth); - /* Configure for power always on */ - else if (wl->quirks & WLCORE_QUIRK_NO_ELP) - wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); /* Configure for ELP power saving */ else wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index d90436d..5aa8b3f 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -515,9 +515,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* Older firmwares use an old NVS format */ #define WLCORE_QUIRK_LEGACY_NVS BIT(5) -/* Some firmwares may not support ELP */ -#define WLCORE_QUIRK_NO_ELP BIT(6) - /* pad only the last frame in the aggregate buffer */ #define WLCORE_QUIRK_TX_PAD_LAST_FRAME BIT(7) -- cgit v0.10.2 From 5d979f35179c365a6455302bd5a1fa0063a4065e Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:48 +0200 Subject: wlcore: clear roc_vif on iface removal When removing an interface currently performing a ROC operation, clear the current ROC state. This is useful especially during recovery and keeps mac80211 in sync to our state. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 1b42cb3..3339216 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2414,6 +2414,11 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, wl->sched_vif = NULL; } + if (wl->roc_vif == vif) { + wl->roc_vif = NULL; + ieee80211_remain_on_channel_expired(wl->hw); + } + if (!test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) { /* disable active roles */ ret = wl1271_ps_elp_wakeup(wl); -- cgit v0.10.2 From 0330ee1f5bb65bd2fd3c4b3980f4ba999405a153 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Nov 2012 08:44:49 +0200 Subject: wl18xx: declare support for greenfield ht_cap The 18xx fw supports greenfield so add the IEEE80211_HT_CAP_GRN_FLD flag to the supported ht capabilities flags. Signed-off-by: Eliad Peller Signed-off-by: Ido Reis Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 4621d67..f6c2bac 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1426,7 +1426,8 @@ static struct wlcore_ops wl18xx_ops = { /* HT cap appropriate for wide channels in 2Ghz */ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40, + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, @@ -1440,7 +1441,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { /* HT cap appropriate for wide channels in 5Ghz */ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_SUP_WIDTH_20_40, + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, @@ -1453,7 +1455,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { /* HT cap appropriate for SISO 20 */ static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { - .cap = IEEE80211_HT_CAP_SGI_20, + .cap = IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, @@ -1466,7 +1469,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { /* HT cap appropriate for MIMO rates in 20mhz channel */ static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = { - .cap = IEEE80211_HT_CAP_SGI_20, + .cap = IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, -- cgit v0.10.2 From 4c145185175dcca660265d2fcdd4feffc0249f8e Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Tue, 27 Nov 2012 08:44:52 +0200 Subject: wlcore: remove unnecessary WARN_ON in wl12xx_tx_reset Sometimes the driver can perform a recovery while Tx is active, this will trigger unnecessary warning which might delay the recovery for more than 100 mS. Signed-off-by: Victor Goldenshtein Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index c3607f0..b5b9bd6 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -1028,7 +1028,7 @@ void wl12xx_tx_reset(struct wl1271 *wl) struct ieee80211_tx_info *info; /* only reset the queues if something bad happened */ - if (WARN_ON_ONCE(wl1271_tx_total_queue_count(wl) != 0)) { + if (wl1271_tx_total_queue_count(wl) != 0) { for (i = 0; i < WL12XX_MAX_LINKS; i++) wl1271_tx_reset_link_queues(wl, i); -- cgit v0.10.2 From d935e385f88616fa867406de97521e07fe41539d Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:53 +0200 Subject: wlcore: take the mutex before resetting Tx queues Otherwise we risk contention for private members of our global structure while op_stop_locked is running. Reported-by: Ido Yariv Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 3339216..63d3413 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1852,8 +1852,8 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) cancel_delayed_work_sync(&wl->tx_watchdog_work); /* let's notify MAC80211 about the remaining pending TX frames */ - wl12xx_tx_reset(wl); mutex_lock(&wl->mutex); + wl12xx_tx_reset(wl); wl1271_power_off(wl); /* -- cgit v0.10.2 From 6c4c45346289ec1c8a6a204e2c81325a4cf96924 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:54 +0200 Subject: wlcore: consolidate free_link and always call it Make sure free_link is always called when removing an interface. This ensures all skbs belonging to this interface are returned to mac80211. Otherwise these dangling skbs might crash the system on the next call to wl1271_tx_reset_link_queues(). This happens on recovery/stop or an unsuccessful Tx flush. Signed-off-by: Ido Yariv Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index ead19c9..38243aa 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -339,6 +339,11 @@ void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) __clear_bit(*hlid, wlvif->links_map); spin_unlock_irqrestore(&wl->wl_lock, flags); + wl->links[*hlid].allocated_pkts = 0; + wl->links[*hlid].prev_freed_pkts = 0; + wl->links[*hlid].ba_bitmap = 0; + memset(wl->links[*hlid].addr, 0, ETH_ALEN); + /* * At this point op_tx() will not add more packets to the queues. We * can purge them. diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 63d3413..6dcd7ec 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4429,8 +4429,6 @@ void wl1271_free_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid) return; clear_bit(hlid, wlvif->ap.sta_hlid_map); - memset(wl->links[hlid].addr, 0, ETH_ALEN); - wl->links[hlid].ba_bitmap = 0; __clear_bit(hlid, &wl->ap_ps_map); __clear_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map); wl12xx_free_link(wl, wlvif, &hlid); diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index b5b9bd6..c711c91 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -1009,13 +1009,14 @@ void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif) /* TX failure */ for_each_set_bit(i, wlvif->links_map, WL12XX_MAX_LINKS) { - if (wlvif->bss_type == BSS_TYPE_AP_BSS) + if (wlvif->bss_type == BSS_TYPE_AP_BSS) { + /* this calls wl12xx_free_link */ wl1271_free_sta(wl, wlvif, i); - else + } else { + u8 hlid = i; wlvif->sta.ba_rx_bitmap = 0; - - wl->links[i].allocated_pkts = 0; - wl->links[i].prev_freed_pkts = 0; + wl12xx_free_link(wl, wlvif, &hlid); + } } wlvif->last_tx_hlid = 0; -- cgit v0.10.2 From 583f81644ab34a1314827a1dffc7fc8fbad7dc0f Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Tue, 27 Nov 2012 08:44:55 +0200 Subject: wlcore: restore default channel configuration wlcore allocates two static structs wl1271_band_2ghz & wl1271_band_5ghz which are used/modified by Reg-Domain e.g. some channel might be marked as passive at some point. Make sure we don't keep stale settings around if the HW is unregistered/registered during operation. [Arik - use Tx-power constant and tweak commit message] Signed-off-by: Victor Goldenshtein Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 6dcd7ec..7b1fc91 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5070,20 +5070,20 @@ static struct ieee80211_rate wl1271_rates[] = { /* can't be const, mac80211 writes to this */ static struct ieee80211_channel wl1271_channels[] = { - { .hw_value = 1, .center_freq = 2412, .max_power = 25 }, - { .hw_value = 2, .center_freq = 2417, .max_power = 25 }, - { .hw_value = 3, .center_freq = 2422, .max_power = 25 }, - { .hw_value = 4, .center_freq = 2427, .max_power = 25 }, - { .hw_value = 5, .center_freq = 2432, .max_power = 25 }, - { .hw_value = 6, .center_freq = 2437, .max_power = 25 }, - { .hw_value = 7, .center_freq = 2442, .max_power = 25 }, - { .hw_value = 8, .center_freq = 2447, .max_power = 25 }, - { .hw_value = 9, .center_freq = 2452, .max_power = 25 }, - { .hw_value = 10, .center_freq = 2457, .max_power = 25 }, - { .hw_value = 11, .center_freq = 2462, .max_power = 25 }, - { .hw_value = 12, .center_freq = 2467, .max_power = 25 }, - { .hw_value = 13, .center_freq = 2472, .max_power = 25 }, - { .hw_value = 14, .center_freq = 2484, .max_power = 25 }, + { .hw_value = 1, .center_freq = 2412, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 2, .center_freq = 2417, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 3, .center_freq = 2422, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 4, .center_freq = 2427, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 5, .center_freq = 2432, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 6, .center_freq = 2437, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 7, .center_freq = 2442, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 8, .center_freq = 2447, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 9, .center_freq = 2452, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 10, .center_freq = 2457, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 11, .center_freq = 2462, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 12, .center_freq = 2467, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 13, .center_freq = 2472, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 14, .center_freq = 2484, .max_power = WLCORE_MAX_TXPWR }, }; /* can't be const, mac80211 writes to this */ @@ -5124,40 +5124,40 @@ static struct ieee80211_rate wl1271_rates_5ghz[] = { /* 5 GHz band channels for WL1273 */ static struct ieee80211_channel wl1271_channels_5ghz[] = { - { .hw_value = 7, .center_freq = 5035, .max_power = 25 }, - { .hw_value = 8, .center_freq = 5040, .max_power = 25 }, - { .hw_value = 9, .center_freq = 5045, .max_power = 25 }, - { .hw_value = 11, .center_freq = 5055, .max_power = 25 }, - { .hw_value = 12, .center_freq = 5060, .max_power = 25 }, - { .hw_value = 16, .center_freq = 5080, .max_power = 25 }, - { .hw_value = 34, .center_freq = 5170, .max_power = 25 }, - { .hw_value = 36, .center_freq = 5180, .max_power = 25 }, - { .hw_value = 38, .center_freq = 5190, .max_power = 25 }, - { .hw_value = 40, .center_freq = 5200, .max_power = 25 }, - { .hw_value = 42, .center_freq = 5210, .max_power = 25 }, - { .hw_value = 44, .center_freq = 5220, .max_power = 25 }, - { .hw_value = 46, .center_freq = 5230, .max_power = 25 }, - { .hw_value = 48, .center_freq = 5240, .max_power = 25 }, - { .hw_value = 52, .center_freq = 5260, .max_power = 25 }, - { .hw_value = 56, .center_freq = 5280, .max_power = 25 }, - { .hw_value = 60, .center_freq = 5300, .max_power = 25 }, - { .hw_value = 64, .center_freq = 5320, .max_power = 25 }, - { .hw_value = 100, .center_freq = 5500, .max_power = 25 }, - { .hw_value = 104, .center_freq = 5520, .max_power = 25 }, - { .hw_value = 108, .center_freq = 5540, .max_power = 25 }, - { .hw_value = 112, .center_freq = 5560, .max_power = 25 }, - { .hw_value = 116, .center_freq = 5580, .max_power = 25 }, - { .hw_value = 120, .center_freq = 5600, .max_power = 25 }, - { .hw_value = 124, .center_freq = 5620, .max_power = 25 }, - { .hw_value = 128, .center_freq = 5640, .max_power = 25 }, - { .hw_value = 132, .center_freq = 5660, .max_power = 25 }, - { .hw_value = 136, .center_freq = 5680, .max_power = 25 }, - { .hw_value = 140, .center_freq = 5700, .max_power = 25 }, - { .hw_value = 149, .center_freq = 5745, .max_power = 25 }, - { .hw_value = 153, .center_freq = 5765, .max_power = 25 }, - { .hw_value = 157, .center_freq = 5785, .max_power = 25 }, - { .hw_value = 161, .center_freq = 5805, .max_power = 25 }, - { .hw_value = 165, .center_freq = 5825, .max_power = 25 }, + { .hw_value = 7, .center_freq = 5035, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 8, .center_freq = 5040, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 9, .center_freq = 5045, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 11, .center_freq = 5055, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 12, .center_freq = 5060, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 16, .center_freq = 5080, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 34, .center_freq = 5170, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 36, .center_freq = 5180, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 38, .center_freq = 5190, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 40, .center_freq = 5200, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 42, .center_freq = 5210, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 44, .center_freq = 5220, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 46, .center_freq = 5230, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 48, .center_freq = 5240, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 52, .center_freq = 5260, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 56, .center_freq = 5280, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 60, .center_freq = 5300, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 64, .center_freq = 5320, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 100, .center_freq = 5500, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 104, .center_freq = 5520, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 108, .center_freq = 5540, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 112, .center_freq = 5560, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 116, .center_freq = 5580, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 120, .center_freq = 5600, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 124, .center_freq = 5620, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 128, .center_freq = 5640, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 132, .center_freq = 5660, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 136, .center_freq = 5680, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 140, .center_freq = 5700, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 149, .center_freq = 5745, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 153, .center_freq = 5765, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 157, .center_freq = 5785, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 161, .center_freq = 5805, .max_power = WLCORE_MAX_TXPWR }, + { .hw_value = 165, .center_freq = 5825, .max_power = WLCORE_MAX_TXPWR }, }; static struct ieee80211_supported_band wl1271_band_5ghz = { @@ -5521,6 +5521,7 @@ wlcore_iface_combinations[] = { static int wl1271_init_ieee80211(struct wl1271 *wl) { + int i; static const u32 cipher_suites[] = { WLAN_CIPHER_SUITE_WEP40, WLAN_CIPHER_SUITE_WEP104, @@ -5583,6 +5584,22 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) ARRAY_SIZE(wl1271_channels_5ghz) > WL1271_MAX_CHANNELS); /* + * clear channel flags from the previous usage + * and restore max_power & max_antenna_gain values. + */ + for (i = 0; i < ARRAY_SIZE(wl1271_channels); i++) { + wl1271_band_2ghz.channels[i].flags = 0; + wl1271_band_2ghz.channels[i].max_power = WLCORE_MAX_TXPWR; + wl1271_band_2ghz.channels[i].max_antenna_gain = 0; + } + + for (i = 0; i < ARRAY_SIZE(wl1271_channels_5ghz); i++) { + wl1271_band_5ghz.channels[i].flags = 0; + wl1271_band_5ghz.channels[i].max_power = WLCORE_MAX_TXPWR; + wl1271_band_5ghz.channels[i].max_antenna_gain = 0; + } + + /* * We keep local copies of the band structs because we need to * modify them on a per-device basis. */ diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 5aa8b3f..8703ae9 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -37,6 +37,9 @@ */ #define WLCORE_NUM_MAC_ADDRESSES 3 +/* wl12xx/wl18xx maximum transmission power (in dBm) */ +#define WLCORE_MAX_TXPWR 25 + /* forward declaration */ struct wl1271_tx_hw_descr; enum wl_rx_buf_align; -- cgit v0.10.2 From b50a62bb39c66e6ed5f1f581bb32644936f08cf3 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:56 +0200 Subject: wlcore: initialize per-link FW freed blocks correctly When a link is allocated, sometimes the "freed packets" counter in FW is non zero, but we always assumed it is. This caused us to incorrectly account FW allocated blocks in some cases. When operating in AP mode, this bug caused some stations to never come back from PSM. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 38243aa..e00d64b 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -322,6 +322,10 @@ int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) __set_bit(link, wl->links_map); __set_bit(link, wlvif->links_map); spin_unlock_irqrestore(&wl->wl_lock, flags); + + /* take the last "freed packets" value from the current FW status */ + wl->links[link].prev_freed_pkts = + wl->fw_status_2->counters.tx_lnk_free_pkts[link]; *hlid = link; return 0; } -- cgit v0.10.2 From 1e0708a9574aee0136611edc5d3a7a9b2775a113 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:57 +0200 Subject: wlcore: track wlvif inside per-link structure This allows us to pass only the link as a parameter to various functions and deduce the wlvif. Note that this member will be NULL for global links. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index e00d64b..56432c8 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -326,6 +326,7 @@ int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) /* take the last "freed packets" value from the current FW status */ wl->links[link].prev_freed_pkts = wl->fw_status_2->counters.tx_lnk_free_pkts[link]; + wl->links[link].wlvif = wlvif; *hlid = link; return 0; } @@ -353,6 +354,7 @@ void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) * can purge them. */ wl1271_tx_reset_link_queues(wl, *hlid); + wl->links[*hlid].wlvif = NULL; *hlid = WL12XX_INVALID_LINK_ID; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index d6854b9..9ffbfc1 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -249,6 +249,8 @@ enum wl12xx_vif_flags { WLVIF_FLAG_IN_USE, }; +struct wl12xx_vif; + struct wl1271_link { /* AP-mode - TX queue per AC in link */ struct sk_buff_head tx_queue[NUM_TX_QUEUES]; @@ -261,6 +263,9 @@ struct wl1271_link { /* bitmap of TIDs where RX BA sessions are active for this link */ u8 ba_bitmap; + + /* The wlvif this link belongs to. Might be null for global links */ + struct wl12xx_vif *wlvif; }; #define WL1271_MAX_RX_FILTERS 5 -- cgit v0.10.2 From 8591d42452f16b1888419da4456142864b08ef9e Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:58 +0200 Subject: wlcore: count packets held per AC in each vif This accounting will help find a vif that has data in a specific AC. Otherwise we have to traverse all the links, which can be lengthy for the AP case. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c index e61fc2b..f115fba 100644 --- a/drivers/net/wireless/ti/wlcore/debugfs.c +++ b/drivers/net/wireless/ti/wlcore/debugfs.c @@ -577,6 +577,10 @@ static ssize_t vifs_state_read(struct file *file, char __user *user_buf, VIF_STATE_PRINT_INT(ap.ucast_rate_idx[3]); } VIF_STATE_PRINT_INT(last_tx_hlid); + VIF_STATE_PRINT_INT(tx_queue_count[0]); + VIF_STATE_PRINT_INT(tx_queue_count[1]); + VIF_STATE_PRINT_INT(tx_queue_count[2]); + VIF_STATE_PRINT_INT(tx_queue_count[3]); VIF_STATE_PRINT_LHEX(links_map[0]); VIF_STATE_PRINT_NSTR(ssid, wlvif->ssid_len); VIF_STATE_PRINT_INT(band); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 7b1fc91..56ed379 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1206,6 +1206,8 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, skb_queue_tail(&wl->links[hlid].tx_queue[q], skb); wl->tx_queue_count[q]++; + if (wlvif) + wlvif->tx_queue_count[q]++; /* * The workqueue is slow to process the tx_queue and we need stop diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c index ffcd843..9b7b6e2 100644 --- a/drivers/net/wireless/ti/wlcore/ps.c +++ b/drivers/net/wireless/ti/wlcore/ps.c @@ -239,11 +239,12 @@ static void wl1271_ps_filter_frames(struct wl1271 *wl, u8 hlid) struct ieee80211_tx_info *info; unsigned long flags; int filtered[NUM_TX_QUEUES]; + struct wl1271_link *lnk = &wl->links[hlid]; /* filter all frames currently in the low level queues for this hlid */ for (i = 0; i < NUM_TX_QUEUES; i++) { filtered[i] = 0; - while ((skb = skb_dequeue(&wl->links[hlid].tx_queue[i]))) { + while ((skb = skb_dequeue(&lnk->tx_queue[i]))) { filtered[i]++; if (WARN_ON(wl12xx_is_dummy_packet(wl, skb))) @@ -257,8 +258,11 @@ static void wl1271_ps_filter_frames(struct wl1271 *wl, u8 hlid) } spin_lock_irqsave(&wl->wl_lock, flags); - for (i = 0; i < NUM_TX_QUEUES; i++) + for (i = 0; i < NUM_TX_QUEUES; i++) { wl->tx_queue_count[i] -= filtered[i]; + if (lnk->wlvif) + lnk->wlvif->tx_queue_count[i] -= filtered[i]; + } spin_unlock_irqrestore(&wl->wl_lock, flags); wl1271_handle_tx_low_watermark(wl); diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index c711c91..1ac8681 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -514,6 +514,10 @@ static struct sk_buff *wl12xx_lnk_skb_dequeue(struct wl1271 *wl, spin_lock_irqsave(&wl->wl_lock, flags); WARN_ON_ONCE(wl->tx_queue_count[q] <= 0); wl->tx_queue_count[q]--; + if (lnk->wlvif) { + WARN_ON_ONCE(lnk->wlvif->tx_queue_count[q] <= 0); + lnk->wlvif->tx_queue_count[q]--; + } spin_unlock_irqrestore(&wl->wl_lock, flags); } @@ -628,6 +632,8 @@ static void wl1271_skb_queue_head(struct wl1271 *wl, struct wl12xx_vif *wlvif, spin_lock_irqsave(&wl->wl_lock, flags); wl->tx_queue_count[q]++; + if (wlvif) + wlvif->tx_queue_count[q]++; spin_unlock_irqrestore(&wl->wl_lock, flags); } @@ -977,10 +983,11 @@ void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid) unsigned long flags; struct ieee80211_tx_info *info; int total[NUM_TX_QUEUES]; + struct wl1271_link *lnk = &wl->links[hlid]; for (i = 0; i < NUM_TX_QUEUES; i++) { total[i] = 0; - while ((skb = skb_dequeue(&wl->links[hlid].tx_queue[i]))) { + while ((skb = skb_dequeue(&lnk->tx_queue[i]))) { wl1271_debug(DEBUG_TX, "link freeing skb 0x%p", skb); if (!wl12xx_is_dummy_packet(wl, skb)) { @@ -995,8 +1002,11 @@ void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid) } spin_lock_irqsave(&wl->wl_lock, flags); - for (i = 0; i < NUM_TX_QUEUES; i++) + for (i = 0; i < NUM_TX_QUEUES; i++) { wl->tx_queue_count[i] -= total[i]; + if (lnk->wlvif) + lnk->wlvif->tx_queue_count[i] -= total[i]; + } spin_unlock_irqrestore(&wl->wl_lock, flags); wl1271_handle_tx_low_watermark(wl); @@ -1020,6 +1030,8 @@ void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif) } wlvif->last_tx_hlid = 0; + for (i = 0; i < NUM_TX_QUEUES; i++) + wlvif->tx_queue_count[i] = 0; } /* caller must hold wl->mutex and TX must be stopped */ void wl12xx_tx_reset(struct wl1271 *wl) diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 9ffbfc1..670d12f 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -359,6 +359,9 @@ struct wl12xx_vif { /* the hlid of the last transmitted skb */ int last_tx_hlid; + /* counters of packets per AC, across all links in the vif */ + int tx_queue_count[NUM_TX_QUEUES]; + unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)]; u8 ssid[IEEE80211_MAX_SSID_LEN + 1]; -- cgit v0.10.2 From 9ebcb232158c737db21e22b7bfdc4fc6d661ea8c Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:44:59 +0200 Subject: wlcore: track FW-allocated packets per link Move FW-allocation tracking code to the fw_status function and track allocations made by all links. These will be incorporated in the improved Tx scheduling algorithm. Manually zero the system link counters on op_stop, as this link is not allocated the normal way. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 56ed379..33a9559 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -359,9 +359,8 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct wl_fw_status_2 *status) { - struct wl1271_link *lnk; u32 cur_fw_ps_map; - u8 hlid, cnt; + u8 hlid; /* TODO: also use link_fast_bitmap here */ @@ -375,17 +374,9 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl, wl->ap_fw_ps_map = cur_fw_ps_map; } - for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, WL12XX_MAX_LINKS) { - lnk = &wl->links[hlid]; - cnt = status->counters.tx_lnk_free_pkts[hlid] - - lnk->prev_freed_pkts; - - lnk->prev_freed_pkts = status->counters.tx_lnk_free_pkts[hlid]; - lnk->allocated_pkts -= cnt; - + for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, WL12XX_MAX_LINKS) wl12xx_irq_ps_regulate_link(wl, wlvif, hlid, - lnk->allocated_pkts); - } + wl->links[hlid].allocated_pkts); } static int wlcore_fw_status(struct wl1271 *wl, @@ -399,6 +390,7 @@ static int wlcore_fw_status(struct wl1271 *wl, int i; size_t status_len; int ret; + struct wl1271_link *lnk; status_len = WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) + sizeof(*status_2) + wl->fw_status_priv_len; @@ -424,6 +416,17 @@ static int wlcore_fw_status(struct wl1271 *wl, wl->tx_pkts_freed[i] = status_2->counters.tx_released_pkts[i]; } + + for_each_set_bit(i, wl->links_map, WL12XX_MAX_LINKS) { + lnk = &wl->links[i]; + /* prevent wrap-around in freed-packets counter */ + lnk->allocated_pkts -= + (status_2->counters.tx_lnk_free_pkts[i] - + lnk->prev_freed_pkts) & 0xff; + + lnk->prev_freed_pkts = status_2->counters.tx_lnk_free_pkts[i]; + } + /* prevent wrap-around in total blocks counter */ if (likely(wl->tx_blocks_freed <= le32_to_cpu(status_2->total_released_blks))) @@ -1886,6 +1889,8 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) wl->active_sta_count = 0; /* The system link is always allocated */ + wl->links[WL12XX_SYSTEM_HLID].allocated_pkts = 0; + wl->links[WL12XX_SYSTEM_HLID].prev_freed_pkts = 0; __set_bit(WL12XX_SYSTEM_HLID, wl->links_map); /* diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 1ac8681..076983b 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -224,9 +224,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct wl12xx_vif *wlvif, ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); wl->tx_allocated_pkts[ac]++; - if (!wl12xx_is_dummy_packet(wl, skb) && wlvif && - wlvif->bss_type == BSS_TYPE_AP_BSS && - test_bit(hlid, wlvif->ap.sta_hlid_map)) + if (test_bit(hlid, wl->links_map)) wl->links[hlid].allocated_pkts++; ret = 0; -- cgit v0.10.2 From 0e81047996fdde7fc9e8a1c01d532df1f53586fa Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:45:00 +0200 Subject: wlcore: improved Tx scheduling algorithm Prioritize EDCA by choosing the AC before anything else. Use the fast/slow link bitmap in FW to improve the scheduling algorithm for the multi-link scenario. Set packet thresholds to determine if a given link is high or low priority according to its speed. A slow link will be given high priority if the amount of packets queued for it in the FW is lower than the slow-threshold. Similarly, a fast link will be given high priority if the number of its packets queued in FW is smaller than the high-threshold. The improved algorithm: 1. Choose optimal AC according to FW utilization 2. Traversing the VIFs in a round-robin fashion, try to choose a high priority link. Links are traversed in a round-robin fashion inside a VIF. 3. If no high priority links are found, choose the first non-empty (low priority) link found in the round robin. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index d22b52f..64dffaf 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -210,6 +210,8 @@ static struct wlcore_conf wl12xx_conf = { .tmpl_short_retry_limit = 10, .tmpl_long_retry_limit = 10, .tx_watchdog_timeout = 5000, + .slow_link_thold = 3, + .fast_link_thold = 10, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index f6c2bac..a5119d3 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -337,6 +337,8 @@ static struct wlcore_conf wl18xx_conf = { .tmpl_short_retry_limit = 10, .tmpl_long_retry_limit = 10, .tx_watchdog_timeout = 5000, + .slow_link_thold = 3, + .fast_link_thold = 30, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 1bd831c..552ac81 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -677,6 +677,18 @@ struct conf_tx_settings { /* Time in ms for Tx watchdog timer to expire */ u32 tx_watchdog_timeout; + + /* + * when a slow link has this much packets pending, it becomes a low + * priority link, scheduling-wise + */ + u8 slow_link_thold; + + /* + * when a fast link has this much packets pending, it becomes a low + * priority link, scheduling-wise + */ + u8 fast_link_thold; } __packed; enum { @@ -1281,7 +1293,7 @@ struct conf_recovery_settings { * version, the two LSB are the lower driver's private conf * version. */ -#define WLCORE_CONF_VERSION (0x0004 << 16) +#define WLCORE_CONF_VERSION (0x0005 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 33a9559..486b7fa 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -362,8 +362,6 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl, u32 cur_fw_ps_map; u8 hlid; - /* TODO: also use link_fast_bitmap here */ - cur_fw_ps_map = le32_to_cpu(status->link_ps_bitmap); if (wl->ap_fw_ps_map != cur_fw_ps_map) { wl1271_debug(DEBUG_PSM, @@ -479,6 +477,8 @@ static int wlcore_fw_status(struct wl1271 *wl, wl->time_offset = (timespec_to_ns(&ts) >> 10) - (s64)le32_to_cpu(status_2->fw_localtime); + wl->fw_fast_lnk_map = le32_to_cpu(status_2->link_fast_bitmap); + return 0; } diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 076983b..fbda3cb 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -467,8 +467,7 @@ void wl1271_handle_tx_low_watermark(struct wl1271 *wl) } } -static struct sk_buff_head *wl1271_select_queue(struct wl1271 *wl, - struct sk_buff_head *queues) +static int wlcore_select_ac(struct wl1271 *wl) { int i, q = -1, ac; u32 min_pkts = 0xffffffff; @@ -482,33 +481,24 @@ static struct sk_buff_head *wl1271_select_queue(struct wl1271 *wl, */ for (i = 0; i < NUM_TX_QUEUES; i++) { ac = wl1271_tx_get_queue(i); - if (!skb_queue_empty(&queues[ac]) && - (wl->tx_allocated_pkts[ac] < min_pkts)) { + if (wl->tx_queue_count[ac] && + wl->tx_allocated_pkts[ac] < min_pkts) { q = ac; min_pkts = wl->tx_allocated_pkts[q]; } } - if (q == -1) - return NULL; - - return &queues[q]; + return q; } -static struct sk_buff *wl12xx_lnk_skb_dequeue(struct wl1271 *wl, - struct wl1271_link *lnk) +static struct sk_buff *wlcore_lnk_dequeue(struct wl1271 *wl, + struct wl1271_link *lnk, u8 q) { struct sk_buff *skb; unsigned long flags; - struct sk_buff_head *queue; - queue = wl1271_select_queue(wl, lnk->tx_queue); - if (!queue) - return NULL; - - skb = skb_dequeue(queue); + skb = skb_dequeue(&lnk->tx_queue[q]); if (skb) { - int q = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); spin_lock_irqsave(&wl->wl_lock, flags); WARN_ON_ONCE(wl->tx_queue_count[q] <= 0); wl->tx_queue_count[q]--; @@ -522,9 +512,41 @@ static struct sk_buff *wl12xx_lnk_skb_dequeue(struct wl1271 *wl, return skb; } -static struct sk_buff *wl12xx_vif_skb_dequeue(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - u8 *hlid) +static bool wlcore_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = wl->conf.tx.fast_link_thold; + else + thold = wl->conf.tx.slow_link_thold; + + return lnk->allocated_pkts < thold; +} + +static struct sk_buff *wlcore_lnk_dequeue_high_prio(struct wl1271 *wl, + u8 hlid, u8 ac, + u8 *low_prio_hlid) +{ + struct wl1271_link *lnk = &wl->links[hlid]; + + if (!wlcore_lnk_high_prio(wl, hlid, lnk)) { + if (*low_prio_hlid == WL12XX_INVALID_LINK_ID && + !skb_queue_empty(&lnk->tx_queue[ac])) + /* we found the first non-empty low priority queue */ + *low_prio_hlid = hlid; + + return NULL; + } + + return wlcore_lnk_dequeue(wl, lnk, ac); +} + +static struct sk_buff *wlcore_vif_dequeue_high_prio(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + u8 ac, u8 *hlid, + u8 *low_prio_hlid) { struct sk_buff *skb = NULL; int i, h, start_hlid; @@ -540,7 +562,8 @@ static struct sk_buff *wl12xx_vif_skb_dequeue(struct wl1271 *wl, if (!test_bit(h, wlvif->links_map)) continue; - skb = wl12xx_lnk_skb_dequeue(wl, &wl->links[h]); + skb = wlcore_lnk_dequeue_high_prio(wl, h, ac, + low_prio_hlid); if (!skb) continue; @@ -560,42 +583,74 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl, u8 *hlid) unsigned long flags; struct wl12xx_vif *wlvif = wl->last_wlvif; struct sk_buff *skb = NULL; + int ac; + u8 low_prio_hlid = WL12XX_INVALID_LINK_ID; + + ac = wlcore_select_ac(wl); + if (ac < 0) + goto out; /* continue from last wlvif (round robin) */ if (wlvif) { wl12xx_for_each_wlvif_continue(wl, wlvif) { - skb = wl12xx_vif_skb_dequeue(wl, wlvif, hlid); - if (skb) { - wl->last_wlvif = wlvif; - break; - } + if (!wlvif->tx_queue_count[ac]) + continue; + + skb = wlcore_vif_dequeue_high_prio(wl, wlvif, ac, hlid, + &low_prio_hlid); + if (!skb) + continue; + + wl->last_wlvif = wlvif; + break; } } /* dequeue from the system HLID before the restarting wlvif list */ if (!skb) { - skb = wl12xx_lnk_skb_dequeue(wl, &wl->links[wl->system_hlid]); - *hlid = wl->system_hlid; + skb = wlcore_lnk_dequeue_high_prio(wl, wl->system_hlid, + ac, &low_prio_hlid); + if (skb) { + *hlid = wl->system_hlid; + wl->last_wlvif = NULL; + } } - /* do a new pass over the wlvif list */ + /* Do a new pass over the wlvif list. But no need to continue + * after last_wlvif. The previous pass should have found it. */ if (!skb) { wl12xx_for_each_wlvif(wl, wlvif) { - skb = wl12xx_vif_skb_dequeue(wl, wlvif, hlid); + if (!wlvif->tx_queue_count[ac]) + goto next; + + skb = wlcore_vif_dequeue_high_prio(wl, wlvif, ac, hlid, + &low_prio_hlid); if (skb) { wl->last_wlvif = wlvif; break; } - /* - * No need to continue after last_wlvif. The previous - * pass should have found it. - */ +next: if (wlvif == wl->last_wlvif) break; } } + /* no high priority skbs found - but maybe a low priority one? */ + if (!skb && low_prio_hlid != WL12XX_INVALID_LINK_ID) { + struct wl1271_link *lnk = &wl->links[low_prio_hlid]; + skb = wlcore_lnk_dequeue(wl, lnk, ac); + + WARN_ON(!skb); /* we checked this before */ + *hlid = low_prio_hlid; + + /* ensure proper round robin in the vif/link levels */ + wl->last_wlvif = lnk->wlvif; + if (lnk->wlvif) + lnk->wlvif->last_tx_hlid = low_prio_hlid; + + } + if (!skb && test_and_clear_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags)) { int q; @@ -609,6 +664,7 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl, u8 *hlid) spin_unlock_irqrestore(&wl->wl_lock, flags); } +out: return skb; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 8703ae9..e8245f3 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -361,6 +361,9 @@ struct wl1271 { */ struct wl1271_link links[WL12XX_MAX_LINKS]; + /* Fast/slow links bitmap according to FW */ + u32 fw_fast_lnk_map; + /* AP-mode - a bitmap of links currently in PS mode according to FW */ u32 ap_fw_ps_map; -- cgit v0.10.2 From 4d703847617fa053689b119e43122088c81ef86d Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Fri, 30 Nov 2012 00:46:48 +0200 Subject: wl18xx: set last Tx rate from FW status Obtain the last Tx rate from the FW status and translate it to the mac80211 rate+flag format before sending it up via the Tx status. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/tx.c b/drivers/net/wireless/ti/wl18xx/tx.c index 5b1fb10..57c6943 100644 --- a/drivers/net/wireless/ti/wl18xx/tx.c +++ b/drivers/net/wireless/ti/wl18xx/tx.c @@ -28,6 +28,49 @@ #include "wl18xx.h" #include "tx.h" +static +void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif, + struct ieee80211_tx_rate *rate) +{ + u8 fw_rate = wl->fw_status_2->counters.tx_last_rate; + + if (fw_rate > CONF_HW_RATE_INDEX_MAX) { + wl1271_error("last Tx rate invalid: %d", fw_rate); + rate->idx = 0; + rate->flags = 0; + return; + } + + if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) { + rate->idx = fw_rate; + rate->flags = 0; + } else { + rate->flags = IEEE80211_TX_RC_MCS; + rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0; + + /* SGI modifier is counted as a separate rate */ + if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI) + (rate->idx)--; + if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) + (rate->idx)--; + + /* this also covers the 40Mhz SGI case (= MCS15) */ + if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI || + fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) + rate->flags |= IEEE80211_TX_RC_SHORT_GI; + + if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) { + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + /* adjustment needed for range 0-7 */ + rate->idx -= 8; + rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + } + } + } +} + static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) { struct ieee80211_tx_info *info; @@ -44,7 +87,6 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) /* a zero bit indicates Tx success */ tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX)); - skb = wl->tx_frames[id]; info = IEEE80211_SKB_CB(skb); @@ -56,11 +98,13 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) /* update the TX status info */ if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) info->flags |= IEEE80211_TX_STAT_ACK; + /* + * first pass info->control.vif while it's valid, and then fill out + * the info->status structures + */ + wl18xx_get_last_tx_rate(wl, info->control.vif, &info->status.rates[0]); - /* no real data about Tx completion */ - info->status.rates[0].idx = -1; - info->status.rates[0].count = 0; - info->status.rates[0].flags = 0; + info->status.rates[0].count = 1; /* no data about retries */ info->status.ack_signal = -1; if (!tx_success) diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 552ac81..fd173b9 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -57,20 +57,49 @@ enum { }; enum { - CONF_HW_RATE_INDEX_1MBPS = 0, - CONF_HW_RATE_INDEX_2MBPS = 1, - CONF_HW_RATE_INDEX_5_5MBPS = 2, - CONF_HW_RATE_INDEX_6MBPS = 3, - CONF_HW_RATE_INDEX_9MBPS = 4, - CONF_HW_RATE_INDEX_11MBPS = 5, - CONF_HW_RATE_INDEX_12MBPS = 6, - CONF_HW_RATE_INDEX_18MBPS = 7, - CONF_HW_RATE_INDEX_22MBPS = 8, - CONF_HW_RATE_INDEX_24MBPS = 9, - CONF_HW_RATE_INDEX_36MBPS = 10, - CONF_HW_RATE_INDEX_48MBPS = 11, - CONF_HW_RATE_INDEX_54MBPS = 12, - CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_11MBPS = 3, + CONF_HW_RATE_INDEX_6MBPS = 4, + CONF_HW_RATE_INDEX_9MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_24MBPS = 8, + CONF_HW_RATE_INDEX_36MBPS = 9, + CONF_HW_RATE_INDEX_48MBPS = 10, + CONF_HW_RATE_INDEX_54MBPS = 11, + CONF_HW_RATE_INDEX_MCS0 = 12, + CONF_HW_RATE_INDEX_MCS1 = 13, + CONF_HW_RATE_INDEX_MCS2 = 14, + CONF_HW_RATE_INDEX_MCS3 = 15, + CONF_HW_RATE_INDEX_MCS4 = 16, + CONF_HW_RATE_INDEX_MCS5 = 17, + CONF_HW_RATE_INDEX_MCS6 = 18, + CONF_HW_RATE_INDEX_MCS7 = 19, + CONF_HW_RATE_INDEX_MCS7_SGI = 20, + CONF_HW_RATE_INDEX_MCS0_40MHZ = 21, + CONF_HW_RATE_INDEX_MCS1_40MHZ = 22, + CONF_HW_RATE_INDEX_MCS2_40MHZ = 23, + CONF_HW_RATE_INDEX_MCS3_40MHZ = 24, + CONF_HW_RATE_INDEX_MCS4_40MHZ = 25, + CONF_HW_RATE_INDEX_MCS5_40MHZ = 26, + CONF_HW_RATE_INDEX_MCS6_40MHZ = 27, + CONF_HW_RATE_INDEX_MCS7_40MHZ = 28, + CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI = 29, + + /* MCS8+ rates overlap with 40Mhz rates */ + CONF_HW_RATE_INDEX_MCS8 = 21, + CONF_HW_RATE_INDEX_MCS9 = 22, + CONF_HW_RATE_INDEX_MCS10 = 23, + CONF_HW_RATE_INDEX_MCS11 = 24, + CONF_HW_RATE_INDEX_MCS12 = 25, + CONF_HW_RATE_INDEX_MCS13 = 26, + CONF_HW_RATE_INDEX_MCS14 = 27, + CONF_HW_RATE_INDEX_MCS15 = 28, + CONF_HW_RATE_INDEX_MCS15_SGI = 29, + + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI, }; #define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 670d12f..0194f55 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -130,7 +130,10 @@ struct wl_fw_packet_counters { /* Cumulative counter of released Voice memory blocks */ u8 tx_voice_released_blks; - u8 padding[3]; + /* Tx rate of the last transmitted packet */ + u8 tx_last_rate; + + u8 padding[2]; } __packed; /* FW status registers */ -- cgit v0.10.2 From 530abe195df6918d43c9381fd9a70b7e16d55036 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Wed, 28 Nov 2012 11:42:31 +0200 Subject: wlcore: add ACX_PEER_CAP command ACX_PEER_CAP command is just ACX_PEER_HT_CAP, but allows configuring the peer's support rates as well. this is needed because we start the station role when the remote rates are not known yet. the two commands should be unified in future fw versions, but for now add a new set_peer_cap per-hw op, that will use ACX_PEER_CAP for 18xx, and ACX_PEER_HT_CAP for 12xx. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 64dffaf..8b4827f 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1616,6 +1616,15 @@ static int wl12xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, return wlcore_set_key(wl, cmd, vif, sta, key_conf); } +static int wl12xx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + return wl1271_acx_set_ht_capabilities(wl, ht_cap, allow_ht_operation, + hlid); +} + static int wl12xx_setup(struct wl1271 *wl); static struct wlcore_ops wl12xx_ops = { @@ -1651,6 +1660,7 @@ static struct wlcore_ops wl12xx_ops = { .set_key = wl12xx_set_key, .channel_switch = wl12xx_cmd_channel_switch, .pre_pkt_send = NULL, + .set_peer_cap = wl12xx_set_peer_cap, }; static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c index 801d8af..a169bb5 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.c +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -140,3 +140,57 @@ out: return ret; } + +/* + * this command is basically the same as wl1271_acx_ht_capabilities, + * with the addition of supported rates. they should be unified in + * the next fw api change + */ +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + struct wlcore_acx_peer_cap *acx; + int ret = 0; + u32 ht_capabilites = 0; + + wl1271_debug(DEBUG_ACX, + "acx set cap ht_supp: %d ht_cap: %d rates: 0x%x", + ht_cap->ht_supported, ht_cap->cap, rate_set); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + if (allow_ht_operation && ht_cap->ht_supported) { + /* no need to translate capabilities - use the spec values */ + ht_capabilites = ht_cap->cap; + + /* + * this bit is not employed by the spec but only by FW to + * indicate peer HT support + */ + ht_capabilites |= WL12XX_HT_CAP_HT_OPERATION; + + /* get data from A-MPDU parameters field */ + acx->ampdu_max_length = ht_cap->ampdu_factor; + acx->ampdu_min_spacing = ht_cap->ampdu_density; + } + + acx->hlid = hlid; + acx->ht_capabilites = cpu_to_le32(ht_capabilites); + acx->supported_rates = cpu_to_le32(rate_set); + + ret = wl1271_cmd_configure(wl, ACX_PEER_CAP, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx ht capabilities setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h index b57e348..0e636de 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.h +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -297,11 +297,44 @@ struct wlcore_peer_ht_operation_mode { u8 padding[2]; }; +/* + * ACX_PEER_CAP + * this struct is very similar to wl1271_acx_ht_capabilities, with the + * addition of supported rates + */ +struct wlcore_acx_peer_cap { + struct acx_header header; + + /* bitmask of capability bits supported by the peer */ + __le32 ht_capabilites; + + /* rates supported by the remote peer */ + __le32 supported_rates; + + /* Indicates to which link these capabilities apply. */ + u8 hlid; + + /* + * This the maximum A-MPDU length supported by the AP. The FW may not + * exceed this length when sending A-MPDUs + */ + u8 ampdu_max_length; + + /* This is the minimal spacing required when sending A-MPDUs to the AP*/ + u8 ampdu_min_spacing; + + u8 padding; +} __packed; + int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, u32 sdio_blk_size, u32 extra_mem_blks, u32 len_field_size); int wl18xx_acx_set_checksum_state(struct wl1271 *wl); int wl18xx_acx_clear_statistics(struct wl1271 *wl); int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide); +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid); #endif /* __WL18XX_ACX_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a5119d3..55fd46b 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1386,6 +1386,14 @@ out: mutex_unlock(&wl->mutex); } +static int wl18xx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + return wl18xx_acx_set_peer_cap(wl, ht_cap, allow_ht_operation, + rate_set, hlid); +} static int wl18xx_setup(struct wl1271 *wl); @@ -1423,6 +1431,7 @@ static struct wlcore_ops wl18xx_ops = { .channel_switch = wl18xx_cmd_channel_switch, .pre_pkt_send = wl18xx_pre_pkt_send, .sta_rc_update = wl18xx_sta_rc_update, + .set_peer_cap = wl18xx_set_peer_cap, }; /* HT cap appropriate for wide channels in 2Ghz */ diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c index 9c32f0c..c796543 100644 --- a/drivers/net/wireless/ti/wlcore/acx.c +++ b/drivers/net/wireless/ti/wlcore/acx.c @@ -1340,6 +1340,8 @@ out: kfree(acx); return ret; } +EXPORT_SYMBOL_GPL(wl1271_acx_set_ht_capabilities); + int wl1271_acx_set_ht_information(struct wl1271 *wl, struct wl12xx_vif *wlvif, diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 56432c8..1fbee0d 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -506,11 +506,10 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->sta.hlid = wlvif->sta.hlid; cmd->sta.session = wl->session_ids[wlvif->sta.hlid]; /* - * We don't have the correct remote rates in this stage, and there - * is no way to update them later, so use our supported rates instead. - * The fw will take the configured rate policies into account anyway. + * We don't have the correct remote rates in this stage. the rates + * will be reconfigured later, after authorization. */ - cmd->sta.remote_rates = cpu_to_le32(supported_rates); + cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set); wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d " "basic_rate_set: 0x%x, remote_rates: 0x%x", diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 0e0b656..4db03e1 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -209,4 +209,17 @@ wlcore_hw_sta_rc_update(struct wl1271 *wl, struct wl12xx_vif *wlvif, wl->ops->sta_rc_update(wl, wlvif, sta, changed); } +static inline int +wlcore_hw_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + if (wl->ops->set_peer_cap) + return wl->ops->set_peer_cap(wl, ht_cap, allow_ht_operation, + rate_set, hlid); + + return 0; +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 486b7fa..fed227c 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4132,10 +4132,11 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, bool enabled = bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; - ret = wl1271_acx_set_ht_capabilities(wl, - &sta_ht_cap, - enabled, - wlvif->sta.hlid); + ret = wlcore_hw_set_peer_cap(wl, + &sta_ht_cap, + enabled, + wlvif->rate_set, + wlvif->sta.hlid); if (ret < 0) { wl1271_warning("Set ht cap failed %d", ret); goto out; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index e8245f3..a444116 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -106,6 +106,11 @@ struct wlcore_ops { u32 (*pre_pkt_send)(struct wl1271 *wl, u32 buf_offset, u32 last_len); void (*sta_rc_update)(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_sta *sta, u32 changed); + int (*set_peer_cap)(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid); + }; enum wlcore_partitions { -- cgit v0.10.2 From f4d02007cdd56c59bdb9362c699875cb2d02c0fe Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:33 +0200 Subject: wlcore: remove support for injected Tx Require each incoming packet to have a valid vif. The injected Tx code path was buggy (and unused), so disallow it altogether. Cleanup a few places and add a warning so we can better discover anomalies (corrupted skbs?) masquerading as injected Tx. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index fed227c..ba9f001 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1179,9 +1179,13 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, int q, mapping; u8 hlid; - if (vif) - wlvif = wl12xx_vif_to_data(vif); + if (!vif) { + wl1271_debug(DEBUG_TX, "DROP skb with no vif"); + ieee80211_free_txskb(hw, skb); + return; + } + wlvif = wl12xx_vif_to_data(vif); mapping = skb_get_queue_mapping(skb); q = wl1271_tx_get_queue(mapping); @@ -1195,7 +1199,7 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, * allow these packets through. */ if (hlid == WL12XX_INVALID_LINK_ID || - (wlvif && !test_bit(hlid, wlvif->links_map)) || + (!test_bit(hlid, wlvif->links_map)) || (wlcore_is_queue_stopped(wl, q) && !wlcore_is_queue_stopped_by_reason(wl, q, WLCORE_QUEUE_STOP_REASON_WATERMARK))) { @@ -1209,8 +1213,7 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, skb_queue_tail(&wl->links[hlid].tx_queue[q], skb); wl->tx_queue_count[q]++; - if (wlvif) - wlvif->tx_queue_count[q]++; + wlvif->tx_queue_count[q]++; /* * The workqueue is slow to process the tx_queue and we need stop diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index fbda3cb..8f5ea89 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -157,9 +157,6 @@ u8 wl12xx_tx_get_hlid(struct wl1271 *wl, struct wl12xx_vif *wlvif, { struct ieee80211_tx_info *control; - if (!wlvif || wl12xx_is_dummy_packet(wl, skb)) - return wl->system_hlid; - if (wlvif->bss_type == BSS_TYPE_AP_BSS) return wl12xx_tx_get_hlid_ap(wl, wlvif, skb, sta); @@ -764,7 +761,7 @@ int wlcore_tx_work_locked(struct wl1271 *wl) bool has_data = false; wlvif = NULL; - if (!wl12xx_is_dummy_packet(wl, skb) && info->control.vif) + if (!wl12xx_is_dummy_packet(wl, skb)) wlvif = wl12xx_vif_to_data(info->control.vif); else hlid = wl->system_hlid; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 0194f55..1857b8b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -451,6 +451,7 @@ struct wl12xx_vif { static inline struct wl12xx_vif *wl12xx_vif_to_data(struct ieee80211_vif *vif) { + WARN_ON(!vif); return (struct wl12xx_vif *)vif->drv_priv; } -- cgit v0.10.2 From 5d3a160365306c4161b7064d482c26a85829f170 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Sat, 8 Dec 2012 02:58:23 +0200 Subject: wlcore: increase scan dwell times if no activity There's a limit on scan dwell times of max 30ms in order to avoid degrading voip traffic which could be going on while scanning. However these dwell times increase the chance of missing out on nearby APs leading to partial scan results. Allow configuration of longer dwell times in case there no active interface (i.e. no STA associated or AP up). [Arik - count started vifs using an in-driver function] [Fixed some new checkpatch warnings regarding comments in the networking subsystem. -- Luca] Signed-off-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 8b4827f..08b6762 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -269,6 +269,8 @@ static struct wlcore_conf wl12xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, + .min_dwell_time_active_long = 25000, + .max_dwell_time_active_long = 50000, .dwell_time_passive = 100000, .dwell_time_dfs = 150000, .num_probe_reqs = 2, diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 55fd46b..62f431a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -396,6 +396,8 @@ static struct wlcore_conf wl18xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, + .min_dwell_time_active_long = 25000, + .max_dwell_time_active_long = 50000, .dwell_time_passive = 100000, .dwell_time_dfs = 150000, .num_probe_reqs = 2, diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index fd173b9..2b96ff8 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -1088,6 +1088,7 @@ struct conf_roam_trigger_settings { struct conf_scan_settings { /* * The minimum time to wait on each channel for active scans + * This value will be used whenever there's a connected interface. * * Range: u32 tu/1000 */ @@ -1095,11 +1096,32 @@ struct conf_scan_settings { /* * The maximum time to wait on each channel for active scans + * This value will be currently used whenever there's a + * connected interface. It shouldn't exceed 30000 (~30ms) to avoid + * possible interference of voip traffic going on while scanning. * * Range: u32 tu/1000 */ u32 max_dwell_time_active; + /* The minimum time to wait on each channel for active scans + * when it's possible to have longer scan dwell times. + * Currently this is used whenever we're idle on all interfaces. + * Longer dwell times improve detection of networks within a + * single scan. + * + * Range: u32 tu/1000 + */ + u32 min_dwell_time_active_long; + + /* The maximum time to wait on each channel for active scans + * when it's possible to have longer scan dwell times. + * See min_dwell_time_active_long + * + * Range: u32 tu/1000 + */ + u32 max_dwell_time_active_long; + /* time to wait on the channel for passive scans (in TU/1000) */ u32 dwell_time_passive; diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 7f42f8a..6cfdeae 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -89,6 +89,25 @@ out: } +static void wlcore_started_vifs_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + int *count = (int *)data; + + if (!vif->bss_conf.idle) + (*count)++; +} + +static int wlcore_count_started_vifs(struct wl1271 *wl) +{ + int count = 0; + + ieee80211_iterate_active_interfaces_atomic(wl->hw, + IEEE80211_IFACE_ITER_RESUME_ALL, + wlcore_started_vifs_iter, &count); + return count; +} + static int wlcore_scan_get_channels(struct wl1271 *wl, struct ieee80211_channel *req_channels[], @@ -109,9 +128,14 @@ wlcore_scan_get_channels(struct wl1271 *wl, /* configure dwell times according to scan type */ if (scan_type == SCAN_TYPE_SEARCH) { struct conf_scan_settings *c = &wl->conf.scan; - - min_dwell_time_active = c->min_dwell_time_active; - max_dwell_time_active = c->max_dwell_time_active; + bool active_vif_exists = !!wlcore_count_started_vifs(wl); + + min_dwell_time_active = active_vif_exists ? + c->min_dwell_time_active : + c->min_dwell_time_active_long; + max_dwell_time_active = active_vif_exists ? + c->max_dwell_time_active : + c->max_dwell_time_active_long; dwell_time_passive = c->dwell_time_passive; dwell_time_dfs = c->dwell_time_dfs; } else { -- cgit v0.10.2 From 387116b89e987521653b7e9b70a13a9dc1ea6a85 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:35 +0200 Subject: wlcore: improve handling for Rx errors Treat Rx error code as a bitmask. This allows sending MIC failures when other error bit are on. Align Rx descriptor status mask to the FW definition. Ease debugging in case FW reports failure to decrypt on packets. Discard corrupted packets early in Rx path to avoid reporting other abnormalities with corrupted packets that also have other failure bytes on. Namely - we don't want to get a MIC failure on a corrupted packet. This is mandated by the WiFi specification - see section 11.4.2.4.1 in 802.11-2012. Signed-off-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c index 4665b96..6791a1a 100644 --- a/drivers/net/wireless/ti/wlcore/rx.c +++ b/drivers/net/wireless/ti/wlcore/rx.c @@ -92,9 +92,10 @@ static void wl1271_rx_status(struct wl1271 *wl, status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED | RX_FLAG_DECRYPTED; - if (unlikely(desc_err_code == WL1271_RX_DESC_MIC_FAIL)) { + if (unlikely(desc_err_code & WL1271_RX_DESC_MIC_FAIL)) { status->flag |= RX_FLAG_MMIC_ERROR; - wl1271_warning("Michael MIC error"); + wl1271_warning("Michael MIC error. Desc: 0x%x", + desc_err_code); } } @@ -112,7 +113,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length, u8 *buf; u8 beacon = 0; u8 is_data = 0; - u8 reserved = 0; + u8 reserved = 0, offset_to_data = 0; u16 seq_num; u32 pkt_data_len; @@ -132,6 +133,8 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length, if (rx_align == WLCORE_RX_BUF_UNALIGNED) reserved = RX_BUF_ALIGN; + else if (rx_align == WLCORE_RX_BUF_PADDED) + offset_to_data = RX_BUF_ALIGN; /* the data read starts with the descriptor */ desc = (struct wl1271_rx_descriptor *) data; @@ -143,19 +146,15 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length, return 0; } - switch (desc->status & WL1271_RX_DESC_STATUS_MASK) { /* discard corrupted packets */ - case WL1271_RX_DESC_DRIVER_RX_Q_FAIL: - case WL1271_RX_DESC_DECRYPT_FAIL: - wl1271_warning("corrupted packet in RX with status: 0x%x", - desc->status & WL1271_RX_DESC_STATUS_MASK); - return -EINVAL; - case WL1271_RX_DESC_SUCCESS: - case WL1271_RX_DESC_MIC_FAIL: - break; - default: - wl1271_error("invalid RX descriptor status: 0x%x", - desc->status & WL1271_RX_DESC_STATUS_MASK); + if (desc->status & WL1271_RX_DESC_DECRYPT_FAIL) { + hdr = (void *)(data + sizeof(*desc) + offset_to_data); + wl1271_warning("corrupted packet in RX: status: 0x%x len: %d", + desc->status & WL1271_RX_DESC_STATUS_MASK, + pkt_data_len); + wl1271_dump((DEBUG_RX|DEBUG_CMD), "PKT: ", data + sizeof(*desc), + min(pkt_data_len, + ieee80211_hdrlen(hdr->frame_control))); return -EINVAL; } diff --git a/drivers/net/wireless/ti/wlcore/rx.h b/drivers/net/wireless/ti/wlcore/rx.h index 71eba18..3363f60 100644 --- a/drivers/net/wireless/ti/wlcore/rx.h +++ b/drivers/net/wireless/ti/wlcore/rx.h @@ -84,12 +84,11 @@ * Bits 3-5 - process_id tag (AP mode FW) * Bits 6-7 - reserved */ -#define WL1271_RX_DESC_STATUS_MASK 0x03 +#define WL1271_RX_DESC_STATUS_MASK 0x07 #define WL1271_RX_DESC_SUCCESS 0x00 #define WL1271_RX_DESC_DECRYPT_FAIL 0x01 #define WL1271_RX_DESC_MIC_FAIL 0x02 -#define WL1271_RX_DESC_DRIVER_RX_Q_FAIL 0x03 #define RX_MEM_BLOCK_MASK 0xFF #define RX_BUF_SIZE_MASK 0xFFF00 -- cgit v0.10.2 From c23280eb1436edd30814e5e40e4c46ae4cdb3cf4 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:36 +0200 Subject: wlcore: set 5Ghz probe-req template for DFS channels Even passive scans on DFS channels require us to send probe requests, so configure the probe-req in this case. Also use this opportunity to prevent the code from crashing in case no SSIDs are sent from above. This will likely happen in the DFS case introduced. Even a passive scan might need the probe request configured because of DFS channels. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index daaebad..1df88d5 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -108,27 +108,27 @@ static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, if (cmd->active[0]) { u8 band = IEEE80211_BAND_2GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - req->ie, - req->ie_len, - false); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + req->ie, + req->ie_len, + false); if (ret < 0) { wl1271_error("2.4GHz PROBE request template failed"); goto out; } } - if (cmd->active[1]) { + if (cmd->active[1] || cmd->dfs) { u8 band = IEEE80211_BAND_5GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - req->ie, - req->ie_len, - false); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + req->ie, + req->ie_len, + false); if (ret < 0) { wl1271_error("5GHz PROBE request template failed"); goto out; @@ -230,27 +230,27 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl, if (cmd->active[0]) { u8 band = IEEE80211_BAND_2GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], - true); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + ies->ie[band], + ies->len[band], + true); if (ret < 0) { wl1271_error("2.4GHz PROBE request template failed"); goto out; } } - if (cmd->active[1]) { + if (cmd->active[1] || cmd->dfs) { u8 band = IEEE80211_BAND_5GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], - true); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + ies->ie[band], + ies->len[band], + true); if (ret < 0) { wl1271_error("5GHz PROBE request template failed"); goto out; -- cgit v0.10.2 From c91ec5f3ada86807ea4857fc5793a4efe99c9de3 Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Wed, 28 Nov 2012 11:42:39 +0200 Subject: wl18xx: fix a bug in wl->num_rx_desc initialization wl->num_rx_desc was mistakenly initialized with WL18XX_NUM_TX_DESCRIPTORS but it should use WL18XX_NUM_RX_DESCRIPTORS instead. This bug was passed unnoticed because currently both RX and TX descriptors are initialized to the same value (32). Signed-off-by: Yair Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 62f431a..a35eba2 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1501,7 +1501,7 @@ static int wl18xx_setup(struct wl1271 *wl) wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; - wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; + wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS; wl->num_channels = 2; wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES; wl->band_rate_to_idx = wl18xx_band_rate_to_idx; -- cgit v0.10.2 From f1626fd8983a5bc68ce2879865cce297eb96c0b4 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:40 +0200 Subject: wlcore/wl18xx: change priority calculations for links Update the 18xx FW status private part to include Tx related link priorities. Introduce new HW ops to determine link priority per chip family. For 18xx the changes are: - Suspended links are at most low priority and Tx for them is stopped beyond the suspend threshold. - Active links now get their thresholds directly from FW - There's a new "stop" threshold for active links, at which point a link stops receiving new packets. Update the min 18xx FW version required to make sure suspended links bitmap is advertised by the FW. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 08b6762..6d4a021 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1627,6 +1627,26 @@ static int wl12xx_set_peer_cap(struct wl1271 *wl, hlid); } +static bool wl12xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = wl->conf.tx.fast_link_thold; + else + thold = wl->conf.tx.slow_link_thold; + + return lnk->allocated_pkts < thold; +} + +static bool wl12xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + /* any link is good for low priority */ + return true; +} + static int wl12xx_setup(struct wl1271 *wl); static struct wlcore_ops wl12xx_ops = { @@ -1663,6 +1683,8 @@ static struct wlcore_ops wl12xx_ops = { .channel_switch = wl12xx_cmd_channel_switch, .pre_pkt_send = NULL, .set_peer_cap = wl12xx_set_peer_cap, + .lnk_high_prio = wl12xx_lnk_high_prio, + .lnk_low_prio = wl12xx_lnk_low_prio, }; static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a35eba2..ed34a7f 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1397,6 +1397,45 @@ static int wl18xx_set_peer_cap(struct wl1271 *wl, rate_set, hlid); } +static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv; + u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); + + /* suspended links are never high priority */ + if (test_bit(hlid, (unsigned long *)&suspend_bitmap)) + return false; + + /* the priority thresholds are taken from FW */ + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = status_priv->tx_fast_link_prio_threshold; + else + thold = status_priv->tx_slow_link_prio_threshold; + + return lnk->allocated_pkts < thold; +} + +static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv; + u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); + + if (test_bit(hlid, (unsigned long *)&suspend_bitmap)) + thold = status_priv->tx_suspend_threshold; + else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = status_priv->tx_fast_stop_threshold; + else + thold = status_priv->tx_slow_stop_threshold; + + return lnk->allocated_pkts < thold; +} + static int wl18xx_setup(struct wl1271 *wl); static struct wlcore_ops wl18xx_ops = { @@ -1434,6 +1473,8 @@ static struct wlcore_ops wl18xx_ops = { .pre_pkt_send = wl18xx_pre_pkt_send, .sta_rc_update = wl18xx_sta_rc_update, .set_peer_cap = wl18xx_set_peer_cap, + .lnk_high_prio = wl18xx_lnk_high_prio, + .lnk_low_prio = wl18xx_lnk_low_prio, }; /* HT cap appropriate for wide channels in 2Ghz */ diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 3105fbf..e6ea78c 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -68,7 +68,43 @@ struct wl18xx_fw_status_priv { */ u8 released_tx_desc[WL18XX_FW_MAX_TX_STATUS_DESC]; - u8 padding[2]; + /* A bitmap representing the currently suspended links. The suspend + * is short lived, for multi-channel Tx requirements. + */ + __le32 link_suspend_bitmap; + + /* packet threshold for an "almost empty" AC, + * for Tx schedulng purposes + */ + u8 tx_ac_threshold; + + /* number of packets to queue up for a link in PS */ + u8 tx_ps_threshold; + + /* number of packet to queue up for a suspended link */ + u8 tx_suspend_threshold; + + /* Should have less than this number of packets in queue of a slow + * link to qualify as high priority link + */ + u8 tx_slow_link_prio_threshold; + + /* Should have less than this number of packets in queue of a fast + * link to qualify as high priority link + */ + u8 tx_fast_link_prio_threshold; + + /* Should have less than this number of packets in queue of a slow + * link before we stop queuing up packets for it. + */ + u8 tx_slow_stop_threshold; + + /* Should have less than this number of packets in queue of a fast + * link before we stop queuing up packets for it. + */ + u8 tx_fast_stop_threshold; + + u8 padding[3]; }; #define WL18XX_PHY_VERSION_MAX_LEN 20 diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 4db03e1..7fd260c 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -222,4 +222,24 @@ wlcore_hw_set_peer_cap(struct wl1271 *wl, return 0; } +static inline bool +wlcore_hw_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + if (!wl->ops->lnk_high_prio) + BUG_ON(1); + + return wl->ops->lnk_high_prio(wl, hlid, lnk); +} + +static inline bool +wlcore_hw_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + if (!wl->ops->lnk_low_prio) + BUG_ON(1); + + return wl->ops->lnk_low_prio(wl, hlid, lnk); +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 8f5ea89..25cfd35 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -509,28 +509,16 @@ static struct sk_buff *wlcore_lnk_dequeue(struct wl1271 *wl, return skb; } -static bool wlcore_lnk_high_prio(struct wl1271 *wl, u8 hlid, - struct wl1271_link *lnk) -{ - u8 thold; - - if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) - thold = wl->conf.tx.fast_link_thold; - else - thold = wl->conf.tx.slow_link_thold; - - return lnk->allocated_pkts < thold; -} - static struct sk_buff *wlcore_lnk_dequeue_high_prio(struct wl1271 *wl, u8 hlid, u8 ac, u8 *low_prio_hlid) { struct wl1271_link *lnk = &wl->links[hlid]; - if (!wlcore_lnk_high_prio(wl, hlid, lnk)) { + if (!wlcore_hw_lnk_high_prio(wl, hlid, lnk)) { if (*low_prio_hlid == WL12XX_INVALID_LINK_ID && - !skb_queue_empty(&lnk->tx_queue[ac])) + !skb_queue_empty(&lnk->tx_queue[ac]) && + wlcore_hw_lnk_low_prio(wl, hlid, lnk)) /* we found the first non-empty low priority queue */ *low_prio_hlid = hlid; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index a444116..58e5250 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -110,7 +110,10 @@ struct wlcore_ops { struct ieee80211_sta_ht_cap *ht_cap, bool allow_ht_operation, u32 rate_set, u8 hlid); - + bool (*lnk_high_prio)(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk); + bool (*lnk_low_prio)(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk); }; enum wlcore_partitions { -- cgit v0.10.2 From 98323895c021ff010685ba77773af876eff503a5 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:41 +0200 Subject: wl18xx: limit Tx for the AP single-STA-in-PSM case Treat a single connected STA in PSM as a slow link and regulate Tx speed according to slow link priority/stop thresholds. This allows us to avoid flooding the FW, while delivering decent throughput to a peer in forced-PSM. [Small simplification of the if statements -- Luca] Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index ed34a7f..3f6762c 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1410,7 +1410,8 @@ static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, return false; /* the priority thresholds are taken from FW */ - if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map) && + !test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map)) thold = status_priv->tx_fast_link_prio_threshold; else thold = status_priv->tx_slow_link_prio_threshold; @@ -1428,7 +1429,8 @@ static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, if (test_bit(hlid, (unsigned long *)&suspend_bitmap)) thold = status_priv->tx_suspend_threshold; - else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map) && + !test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map)) thold = status_priv->tx_fast_stop_threshold; else thold = status_priv->tx_slow_stop_threshold; -- cgit v0.10.2 From 9a1009684df5295883ba2eb85066a23ed3c3f6a6 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:42 +0200 Subject: wlcore: use link count for single-STA-PSM optimization Only allow a PSM STA to congest FW memory when it is the single active link. Being a single STA doesn't imply a single link - there might be other links on other roles. [Changed WARN_ON to WARN_ON_ONCE -- Luca] Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1fbee0d..14734b7 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -328,6 +328,8 @@ int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) wl->fw_status_2->counters.tx_lnk_free_pkts[link]; wl->links[link].wlvif = wlvif; *hlid = link; + + wl->active_link_count++; return 0; } @@ -357,6 +359,8 @@ void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid) wl->links[*hlid].wlvif = NULL; *hlid = WL12XX_INVALID_LINK_ID; + wl->active_link_count--; + WARN_ON_ONCE(wl->active_link_count < 0); } static u8 wlcore_get_native_channel_type(u8 nl_channel_type) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index ba9f001..b78c47d 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -334,10 +334,10 @@ static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid, u8 tx_pkts) { - bool fw_ps, single_sta; + bool fw_ps, single_link; fw_ps = test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map); - single_sta = (wl->active_sta_count == 1); + single_link = (wl->active_link_count == 1); /* * Wake up from high level PS if the STA is asleep with too little @@ -348,10 +348,10 @@ static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl, /* * Start high-level PS if the STA is asleep with enough blocks in FW. - * Make an exception if this is the only connected station. In this - * case FW-memory congestion is not a problem. + * Make an exception if this is the only connected link. In this + * case FW-memory congestion is less of a problem. */ - else if (!single_sta && fw_ps && tx_pkts >= WL1271_PS_STA_MAX_PACKETS) + else if (!single_link && fw_ps && tx_pkts >= WL1271_PS_STA_MAX_PACKETS) wl12xx_ps_link_start(wl, wlvif, hlid, true); } @@ -1890,6 +1890,7 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) memset(wl->roc_map, 0, sizeof(wl->roc_map)); memset(wl->session_ids, 0, sizeof(wl->session_ids)); wl->active_sta_count = 0; + wl->active_link_count = 0; /* The system link is always allocated */ wl->links[WL12XX_SYSTEM_HLID].allocated_pkts = 0; @@ -5728,6 +5729,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, wl->platform_quirks = 0; wl->system_hlid = WL12XX_SYSTEM_HLID; wl->active_sta_count = 0; + wl->active_link_count = 0; wl->fwlog_size = 0; init_waitqueue_head(&wl->fwlog_waitq); diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 25cfd35..76dbb6f 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -104,7 +104,7 @@ static void wl1271_tx_regulate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid) { - bool fw_ps, single_sta; + bool fw_ps, single_link; u8 tx_pkts; if (WARN_ON(!test_bit(hlid, wlvif->links_map))) @@ -112,15 +112,15 @@ static void wl1271_tx_regulate_link(struct wl1271 *wl, fw_ps = test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map); tx_pkts = wl->links[hlid].allocated_pkts; - single_sta = (wl->active_sta_count == 1); + single_link = (wl->active_link_count == 1); /* * if in FW PS and there is enough data in FW we can put the link * into high-level PS and clean out its TX queues. - * Make an exception if this is the only connected station. In this - * case FW-memory congestion is not a problem. + * Make an exception if this is the only connected link. In this + * case FW-memory congestion is less of a problem. */ - if (!single_sta && fw_ps && tx_pkts >= WL1271_PS_STA_MAX_PACKETS) + if (!single_link && fw_ps && tx_pkts >= WL1271_PS_STA_MAX_PACKETS) wl12xx_ps_link_start(wl, wlvif, hlid, true); } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 58e5250..22347e8 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -369,6 +369,9 @@ struct wl1271 { */ struct wl1271_link links[WL12XX_MAX_LINKS]; + /* number of currently active links */ + int active_link_count; + /* Fast/slow links bitmap according to FW */ u32 fw_fast_lnk_map; -- cgit v0.10.2 From 1c33db782d1d0d9be83feacbb065cd4956f485e7 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Fri, 30 Nov 2012 00:48:03 +0200 Subject: wlcore: use separate HW queue for each AC in each vif Start using the new hw_queue mechanism in mac80211 and give each AC in each vif its own hw_queue number. This allows us to stop an AC in a vif independently from other vifs. Change the Tx watermark handling functions to count packets per AC in vif. From now on fast links should not be able to hurt the throughput of slow links on the same AC but on different vifs. Change internal queue mgmt functions to operate per vif, to support the new Tx watermark granularity. Make the global versions of the queue stop/start functions to use the global mac80211 API for queue mgmt. This helps in situations where the driver currently doesn't know all the vifs that reside in mac80211. Recovery is a good example for such a case. [Moved hw_base_queue addition into the wlcore_tx_get_mac80211_queue() function; changed WARN_ONs to WARN_ON_ONCEs; simplified for loops; fixed new checkpatch warnings. -- Luca] Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index b78c47d..89f69d9 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1200,8 +1200,8 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, */ if (hlid == WL12XX_INVALID_LINK_ID || (!test_bit(hlid, wlvif->links_map)) || - (wlcore_is_queue_stopped(wl, q) && - !wlcore_is_queue_stopped_by_reason(wl, q, + (wlcore_is_queue_stopped(wl, wlvif, q) && + !wlcore_is_queue_stopped_by_reason(wl, wlvif, q, WLCORE_QUEUE_STOP_REASON_WATERMARK))) { wl1271_debug(DEBUG_TX, "DROP skb hlid %d q %d", hlid, q); ieee80211_free_txskb(hw, skb); @@ -1219,11 +1219,11 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, * The workqueue is slow to process the tx_queue and we need stop * the queue here, otherwise the queue will get too long. */ - if (wl->tx_queue_count[q] >= WL1271_TX_QUEUE_HIGH_WATERMARK && - !wlcore_is_queue_stopped_by_reason(wl, q, + if (wlvif->tx_queue_count[q] >= WL1271_TX_QUEUE_HIGH_WATERMARK && + !wlcore_is_queue_stopped_by_reason(wl, wlvif, q, WLCORE_QUEUE_STOP_REASON_WATERMARK)) { wl1271_debug(DEBUG_TX, "op_tx: stopping queues for q %d", q); - wlcore_stop_queue_locked(wl, q, + wlcore_stop_queue_locked(wl, wlvif, q, WLCORE_QUEUE_STOP_REASON_WATERMARK); } @@ -2290,6 +2290,81 @@ static void wl12xx_force_active_psm(struct wl1271 *wl) } } +struct wlcore_hw_queue_iter_data { + unsigned long hw_queue_map[BITS_TO_LONGS(WLCORE_NUM_MAC_ADDRESSES)]; + /* current vif */ + struct ieee80211_vif *vif; + /* is the current vif among those iterated */ + bool cur_running; +}; + +static void wlcore_hw_queue_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct wlcore_hw_queue_iter_data *iter_data = data; + + if (WARN_ON_ONCE(vif->hw_queue[0] == IEEE80211_INVAL_HW_QUEUE)) + return; + + if (iter_data->cur_running || vif == iter_data->vif) { + iter_data->cur_running = true; + return; + } + + __set_bit(vif->hw_queue[0] / NUM_TX_QUEUES, iter_data->hw_queue_map); +} + +static int wlcore_allocate_hw_queue_base(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct wlcore_hw_queue_iter_data iter_data = {}; + int i, q_base; + + iter_data.vif = vif; + + /* mark all bits taken by active interfaces */ + ieee80211_iterate_active_interfaces_atomic(wl->hw, + IEEE80211_IFACE_ITER_RESUME_ALL, + wlcore_hw_queue_iter, &iter_data); + + /* the current vif is already running in mac80211 (resume/recovery) */ + if (iter_data.cur_running) { + wlvif->hw_queue_base = vif->hw_queue[0]; + wl1271_debug(DEBUG_MAC80211, + "using pre-allocated hw queue base %d", + wlvif->hw_queue_base); + + /* interface type might have changed type */ + goto adjust_cab_queue; + } + + q_base = find_first_zero_bit(iter_data.hw_queue_map, + WLCORE_NUM_MAC_ADDRESSES); + if (q_base >= WLCORE_NUM_MAC_ADDRESSES) + return -EBUSY; + + wlvif->hw_queue_base = q_base * NUM_TX_QUEUES; + wl1271_debug(DEBUG_MAC80211, "allocating hw queue base: %d", + wlvif->hw_queue_base); + + for (i = 0; i < NUM_TX_QUEUES; i++) { + wl->queue_stop_reasons[wlvif->hw_queue_base + i] = 0; + /* register hw queues in mac80211 */ + vif->hw_queue[i] = wlvif->hw_queue_base + i; + } + +adjust_cab_queue: + /* the last places are reserved for cab queues per interface */ + if (wlvif->bss_type == BSS_TYPE_AP_BSS) + vif->cab_queue = NUM_TX_QUEUES * WLCORE_NUM_MAC_ADDRESSES + + wlvif->hw_queue_base / NUM_TX_QUEUES; + else + vif->cab_queue = IEEE80211_INVAL_HW_QUEUE; + + return 0; +} + static int wl1271_op_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { @@ -2336,6 +2411,10 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, goto out; } + ret = wlcore_allocate_hw_queue_base(wl, wlvif); + if (ret < 0) + goto out; + if (wl12xx_need_fw_change(wl, vif_count, true)) { wl12xx_force_active_psm(wl); set_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags); @@ -5564,7 +5643,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) IEEE80211_HW_AP_LINK_PS | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | - IEEE80211_HW_SCAN_WHILE_IDLE; + IEEE80211_HW_SCAN_WHILE_IDLE | + IEEE80211_HW_QUEUE_CONTROL; wl->hw->wiphy->cipher_suites = cipher_suites; wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); @@ -5631,7 +5711,14 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl->bands[IEEE80211_BAND_5GHZ]; - wl->hw->queues = 4; + /* + * allow 4 queues per mac address we support + + * 1 cab queue per mac + one global offchannel Tx queue + */ + wl->hw->queues = (NUM_TX_QUEUES + 1) * WLCORE_NUM_MAC_ADDRESSES + 1; + + /* the last queue is the offchannel queue */ + wl->hw->offchannel_tx_hw_queue = wl->hw->queues - 1; wl->hw->max_rates = 1; wl->hw->wiphy->reg_notifier = wl1271_reg_notify; diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 76dbb6f..d464a8e 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -452,14 +452,17 @@ u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set, void wl1271_handle_tx_low_watermark(struct wl1271 *wl) { int i; + struct wl12xx_vif *wlvif; - for (i = 0; i < NUM_TX_QUEUES; i++) { - if (wlcore_is_queue_stopped_by_reason(wl, i, - WLCORE_QUEUE_STOP_REASON_WATERMARK) && - wl->tx_queue_count[i] <= WL1271_TX_QUEUE_LOW_WATERMARK) { - /* firmware buffer has space, restart queues */ - wlcore_wake_queue(wl, i, - WLCORE_QUEUE_STOP_REASON_WATERMARK); + wl12xx_for_each_wlvif(wl, wlvif) { + for (i = 0; i < NUM_TX_QUEUES; i++) { + if (wlcore_is_queue_stopped_by_reason(wl, wlvif, i, + WLCORE_QUEUE_STOP_REASON_WATERMARK) && + wlvif->tx_queue_count[i] <= + WL1271_TX_QUEUE_LOW_WATERMARK) + /* firmware buffer has space, restart queues */ + wlcore_wake_queue(wl, wlvif, i, + WLCORE_QUEUE_STOP_REASON_WATERMARK); } } } @@ -1194,44 +1197,46 @@ u32 wl1271_tx_min_rate_get(struct wl1271 *wl, u32 rate_set) } EXPORT_SYMBOL_GPL(wl1271_tx_min_rate_get); -void wlcore_stop_queue_locked(struct wl1271 *wl, u8 queue, - enum wlcore_queue_stop_reason reason) +void wlcore_stop_queue_locked(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 queue, enum wlcore_queue_stop_reason reason) { - bool stopped = !!wl->queue_stop_reasons[queue]; + int hwq = wlcore_tx_get_mac80211_queue(wlvif, queue); + bool stopped = !!wl->queue_stop_reasons[hwq]; /* queue should not be stopped for this reason */ - WARN_ON(test_and_set_bit(reason, &wl->queue_stop_reasons[queue])); + WARN_ON_ONCE(test_and_set_bit(reason, &wl->queue_stop_reasons[hwq])); if (stopped) return; - ieee80211_stop_queue(wl->hw, wl1271_tx_get_mac80211_queue(queue)); + ieee80211_stop_queue(wl->hw, hwq); } -void wlcore_stop_queue(struct wl1271 *wl, u8 queue, +void wlcore_stop_queue(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason) { unsigned long flags; spin_lock_irqsave(&wl->wl_lock, flags); - wlcore_stop_queue_locked(wl, queue, reason); + wlcore_stop_queue_locked(wl, wlvif, queue, reason); spin_unlock_irqrestore(&wl->wl_lock, flags); } -void wlcore_wake_queue(struct wl1271 *wl, u8 queue, +void wlcore_wake_queue(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason) { unsigned long flags; + int hwq = wlcore_tx_get_mac80211_queue(wlvif, queue); spin_lock_irqsave(&wl->wl_lock, flags); /* queue should not be clear for this reason */ - WARN_ON(!test_and_clear_bit(reason, &wl->queue_stop_reasons[queue])); + WARN_ON_ONCE(!test_and_clear_bit(reason, &wl->queue_stop_reasons[hwq])); - if (wl->queue_stop_reasons[queue]) + if (wl->queue_stop_reasons[hwq]) goto out; - ieee80211_wake_queue(wl->hw, wl1271_tx_get_mac80211_queue(queue)); + ieee80211_wake_queue(wl->hw, hwq); out: spin_unlock_irqrestore(&wl->wl_lock, flags); @@ -1241,48 +1246,55 @@ void wlcore_stop_queues(struct wl1271 *wl, enum wlcore_queue_stop_reason reason) { int i; + unsigned long flags; - for (i = 0; i < NUM_TX_QUEUES; i++) - wlcore_stop_queue(wl, i, reason); -} -EXPORT_SYMBOL_GPL(wlcore_stop_queues); + spin_lock_irqsave(&wl->wl_lock, flags); -void wlcore_wake_queues(struct wl1271 *wl, - enum wlcore_queue_stop_reason reason) -{ - int i; + /* mark all possible queues as stopped */ + for (i = 0; i < WLCORE_NUM_MAC_ADDRESSES * NUM_TX_QUEUES; i++) + WARN_ON_ONCE(test_and_set_bit(reason, + &wl->queue_stop_reasons[i])); - for (i = 0; i < NUM_TX_QUEUES; i++) - wlcore_wake_queue(wl, i, reason); + /* use the global version to make sure all vifs in mac80211 we don't + * know are stopped. + */ + ieee80211_stop_queues(wl->hw); + + spin_unlock_irqrestore(&wl->wl_lock, flags); } -EXPORT_SYMBOL_GPL(wlcore_wake_queues); -void wlcore_reset_stopped_queues(struct wl1271 *wl) +void wlcore_wake_queues(struct wl1271 *wl, + enum wlcore_queue_stop_reason reason) { int i; unsigned long flags; spin_lock_irqsave(&wl->wl_lock, flags); - for (i = 0; i < NUM_TX_QUEUES; i++) { - if (!wl->queue_stop_reasons[i]) - continue; + /* mark all possible queues as awake */ + for (i = 0; i < WLCORE_NUM_MAC_ADDRESSES * NUM_TX_QUEUES; i++) + WARN_ON_ONCE(!test_and_clear_bit(reason, + &wl->queue_stop_reasons[i])); - wl->queue_stop_reasons[i] = 0; - ieee80211_wake_queue(wl->hw, - wl1271_tx_get_mac80211_queue(i)); - } + /* use the global version to make sure all vifs in mac80211 we don't + * know are woken up. + */ + ieee80211_wake_queues(wl->hw); spin_unlock_irqrestore(&wl->wl_lock, flags); } -bool wlcore_is_queue_stopped_by_reason(struct wl1271 *wl, u8 queue, - enum wlcore_queue_stop_reason reason) +bool wlcore_is_queue_stopped_by_reason(struct wl1271 *wl, + struct wl12xx_vif *wlvif, u8 queue, + enum wlcore_queue_stop_reason reason) { - return test_bit(reason, &wl->queue_stop_reasons[queue]); + int hwq = wlcore_tx_get_mac80211_queue(wlvif, queue); + return test_bit(reason, &wl->queue_stop_reasons[hwq]); } -bool wlcore_is_queue_stopped(struct wl1271 *wl, u8 queue) +bool wlcore_is_queue_stopped(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 queue) { - return !!wl->queue_stop_reasons[queue]; + int hwq = wlcore_tx_get_mac80211_queue(wlvif, queue); + return !!wl->queue_stop_reasons[hwq]; } diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h index 349520d..751bb6f 100644 --- a/drivers/net/wireless/ti/wlcore/tx.h +++ b/drivers/net/wireless/ti/wlcore/tx.h @@ -207,19 +207,22 @@ static inline int wl1271_tx_get_queue(int queue) } } -static inline int wl1271_tx_get_mac80211_queue(int queue) +static inline +int wlcore_tx_get_mac80211_queue(struct wl12xx_vif *wlvif, int queue) { + int mac_queue = wlvif->hw_queue_base; + switch (queue) { case CONF_TX_AC_VO: - return 0; + return mac_queue + 0; case CONF_TX_AC_VI: - return 1; + return mac_queue + 1; case CONF_TX_AC_BE: - return 2; + return mac_queue + 2; case CONF_TX_AC_BK: - return 3; + return mac_queue + 3; default: - return 2; + return mac_queue + 2; } } @@ -252,20 +255,21 @@ void wl12xx_rearm_rx_streaming(struct wl1271 *wl, unsigned long *active_hlids); unsigned int wlcore_calc_packet_alignment(struct wl1271 *wl, unsigned int packet_length); void wl1271_free_tx_id(struct wl1271 *wl, int id); -void wlcore_stop_queue_locked(struct wl1271 *wl, u8 queue, - enum wlcore_queue_stop_reason reason); -void wlcore_stop_queue(struct wl1271 *wl, u8 queue, +void wlcore_stop_queue_locked(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 queue, enum wlcore_queue_stop_reason reason); +void wlcore_stop_queue(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason); -void wlcore_wake_queue(struct wl1271 *wl, u8 queue, +void wlcore_wake_queue(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason); void wlcore_stop_queues(struct wl1271 *wl, enum wlcore_queue_stop_reason reason); void wlcore_wake_queues(struct wl1271 *wl, enum wlcore_queue_stop_reason reason); -void wlcore_reset_stopped_queues(struct wl1271 *wl); -bool wlcore_is_queue_stopped_by_reason(struct wl1271 *wl, u8 queue, +bool wlcore_is_queue_stopped_by_reason(struct wl1271 *wl, + struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason); -bool wlcore_is_queue_stopped(struct wl1271 *wl, u8 queue); +bool wlcore_is_queue_stopped(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 queue); /* from main.c */ void wl1271_free_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 22347e8..6c2fd03 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -255,7 +255,8 @@ struct wl1271 { /* Frames scheduled for transmission, not handled yet */ int tx_queue_count[NUM_TX_QUEUES]; - unsigned long queue_stop_reasons[NUM_TX_QUEUES]; + unsigned long queue_stop_reasons[ + NUM_TX_QUEUES * WLCORE_NUM_MAC_ADDRESSES]; /* Frames received, not handled yet by mac80211 */ struct sk_buff_head deferred_rx_queue; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 1857b8b..ee49676 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -430,6 +430,15 @@ struct wl12xx_vif { int inconn_count; /* + * This vif's queues are mapped to mac80211 HW queues as: + * VO - hw_queue_base + * VI - hw_queue_base + 1 + * BE - hw_queue_base + 2 + * BK - hw_queue_base + 3 + */ + int hw_queue_base; + + /* * This struct must be last! * data that has to be saved acrossed reconfigs (e.g. recovery) * should be declared in this struct. -- cgit v0.10.2 From d6037d22f30738e942ddfd29e3fef17deb075420 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:44 +0200 Subject: wlcore: don't take mutex before stopping queues Protect all functions touching queue_stop_reasons by spin-lock, since they are accessed by op_tx. Now there's no need to take the mutex before caling wlcore_queue_xxx functions. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 89f69d9..56a5308b 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1200,8 +1200,8 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, */ if (hlid == WL12XX_INVALID_LINK_ID || (!test_bit(hlid, wlvif->links_map)) || - (wlcore_is_queue_stopped(wl, wlvif, q) && - !wlcore_is_queue_stopped_by_reason(wl, wlvif, q, + (wlcore_is_queue_stopped_locked(wl, wlvif, q) && + !wlcore_is_queue_stopped_by_reason_locked(wl, wlvif, q, WLCORE_QUEUE_STOP_REASON_WATERMARK))) { wl1271_debug(DEBUG_TX, "DROP skb hlid %d q %d", hlid, q); ieee80211_free_txskb(hw, skb); @@ -1220,7 +1220,7 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, * the queue here, otherwise the queue will get too long. */ if (wlvif->tx_queue_count[q] >= WL1271_TX_QUEUE_HIGH_WATERMARK && - !wlcore_is_queue_stopped_by_reason(wl, wlvif, q, + !wlcore_is_queue_stopped_by_reason_locked(wl, wlvif, q, WLCORE_QUEUE_STOP_REASON_WATERMARK)) { wl1271_debug(DEBUG_TX, "op_tx: stopping queues for q %d", q); wlcore_stop_queue_locked(wl, wlvif, q, @@ -3229,10 +3229,7 @@ static int wlcore_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, * stop the queues and flush to ensure the next packets are * in sync with FW spare block accounting */ - mutex_lock(&wl->mutex); wlcore_stop_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK); - mutex_unlock(&wl->mutex); - wl1271_tx_flush(wl); } diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index d464a8e..894ddc7 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -1288,13 +1288,32 @@ bool wlcore_is_queue_stopped_by_reason(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason) { + unsigned long flags; + bool stopped; + + spin_lock_irqsave(&wl->wl_lock, flags); + stopped = wlcore_is_queue_stopped_by_reason_locked(wl, wlvif, queue, + reason); + spin_unlock_irqrestore(&wl->wl_lock, flags); + + return stopped; +} + +bool wlcore_is_queue_stopped_by_reason_locked(struct wl1271 *wl, + struct wl12xx_vif *wlvif, u8 queue, + enum wlcore_queue_stop_reason reason) +{ int hwq = wlcore_tx_get_mac80211_queue(wlvif, queue); + + WARN_ON_ONCE(!spin_is_locked(&wl->wl_lock)); return test_bit(reason, &wl->queue_stop_reasons[hwq]); } -bool wlcore_is_queue_stopped(struct wl1271 *wl, struct wl12xx_vif *wlvif, - u8 queue) +bool wlcore_is_queue_stopped_locked(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 queue) { int hwq = wlcore_tx_get_mac80211_queue(wlvif, queue); + + WARN_ON_ONCE(!spin_is_locked(&wl->wl_lock)); return !!wl->queue_stop_reasons[hwq]; } diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h index 751bb6f..55aa4ac 100644 --- a/drivers/net/wireless/ti/wlcore/tx.h +++ b/drivers/net/wireless/ti/wlcore/tx.h @@ -268,8 +268,13 @@ void wlcore_wake_queues(struct wl1271 *wl, bool wlcore_is_queue_stopped_by_reason(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 queue, enum wlcore_queue_stop_reason reason); -bool wlcore_is_queue_stopped(struct wl1271 *wl, struct wl12xx_vif *wlvif, - u8 queue); +bool +wlcore_is_queue_stopped_by_reason_locked(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + u8 queue, + enum wlcore_queue_stop_reason reason); +bool wlcore_is_queue_stopped_locked(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 queue); /* from main.c */ void wl1271_free_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 hlid); -- cgit v0.10.2 From 9ae5d8d4b7b845869a04576a7bc5fa6cf9716cd5 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:45 +0200 Subject: wlcore: consolidate Rx BA bitmap management to links struct Remove the STA specific ba_rx_bitmap field and use the common links structure. This simplifies code setting/checking the BA bitmap. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c index f115fba..e70a7c8 100644 --- a/drivers/net/wireless/ti/wlcore/debugfs.c +++ b/drivers/net/wireless/ti/wlcore/debugfs.c @@ -560,7 +560,6 @@ static ssize_t vifs_state_read(struct file *file, char __user *user_buf, if (wlvif->bss_type == BSS_TYPE_STA_BSS || wlvif->bss_type == BSS_TYPE_IBSS) { VIF_STATE_PRINT_INT(sta.hlid); - VIF_STATE_PRINT_INT(sta.ba_rx_bitmap); VIF_STATE_PRINT_INT(sta.basic_rate_idx); VIF_STATE_PRINT_INT(sta.ap_rate_idx); VIF_STATE_PRINT_INT(sta.p2p_rate_idx); diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index cb32c02..2776d95 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -58,9 +58,10 @@ static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif) struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); if (wlvif->bss_type != BSS_TYPE_AP_BSS) { - if (!wlvif->sta.ba_rx_bitmap) + u8 hlid = wlvif->sta.hlid; + if (!wl->links[hlid].ba_bitmap) return; - ieee80211_stop_rx_ba_session(vif, wlvif->sta.ba_rx_bitmap, + ieee80211_stop_rx_ba_session(vif, wl->links[hlid].ba_bitmap, vif->bss_conf.bssid); } else { u8 hlid; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 56a5308b..227c571 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4764,18 +4764,18 @@ static int wl1271_op_ampdu_action(struct ieee80211_hw *hw, if (wlvif->bss_type == BSS_TYPE_STA_BSS) { hlid = wlvif->sta.hlid; - ba_bitmap = &wlvif->sta.ba_rx_bitmap; } else if (wlvif->bss_type == BSS_TYPE_AP_BSS) { struct wl1271_station *wl_sta; wl_sta = (struct wl1271_station *)sta->drv_priv; hlid = wl_sta->hlid; - ba_bitmap = &wl->links[hlid].ba_bitmap; } else { ret = -EINVAL; goto out; } + ba_bitmap = &wl->links[hlid].ba_bitmap; + ret = wl1271_ps_elp_wakeup(wl); if (ret < 0) goto out; diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 894ddc7..ece392c 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -1066,7 +1066,6 @@ void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif) wl1271_free_sta(wl, wlvif, i); } else { u8 hlid = i; - wlvif->sta.ba_rx_bitmap = 0; wl12xx_free_link(wl, wlvif, &hlid); } } diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index ee49676..20316ac 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -330,7 +330,6 @@ struct wl12xx_vif { union { struct { u8 hlid; - u8 ba_rx_bitmap; u8 basic_rate_idx; u8 ap_rate_idx; -- cgit v0.10.2 From c80daad625b382fcd72ad68a5c0a26933263aa85 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:46 +0200 Subject: wl18xx: support MIMO only if HT mode is not forced to SISO Don't use MIMO rates when HT mode is forced to SISO, even if we have multiple antennas. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 3f6762c..0ff9bc7 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1078,7 +1078,12 @@ static bool wl18xx_is_mimo_supported(struct wl1271 *wl) { struct wl18xx_priv *priv = wl->priv; - return priv->conf.phy.number_of_assembled_ant2_4 >= 2; + /* only support MIMO with multiple antennas, and when SISO + * is not forced through config + */ + return (priv->conf.phy.number_of_assembled_ant2_4 >= 2) && + (priv->conf.ht.mode != HT_MODE_WIDE) && + (priv->conf.ht.mode != HT_MODE_SISO20); } /* -- cgit v0.10.2 From 0b70078c38fd1c8d69cf52b93e8c3bdd719a2394 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Wed, 28 Nov 2012 11:42:47 +0200 Subject: wlcore: support scan reports during periodic scan FW API changed and now PERIODIC_SCAN_REPORT_EVENT is sent in case results were found at the end of each sched scan cycle. Previous FW was missing that and broke sched scan. This API change is available from 18xx FW 8.5.0.0.27 [Arik - move changes to 18xx specific files, align FW structures to latest for scan command] Signed-off-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/event.c b/drivers/net/wireless/ti/wl12xx/event.c index 6437dac..6ac0ed7 100644 --- a/drivers/net/wireless/ti/wl12xx/event.c +++ b/drivers/net/wireless/ti/wl12xx/event.c @@ -64,9 +64,13 @@ int wl12xx_process_mailbox_events(struct wl1271 *wl) wl12xx_scan_completed(wl, wl->scan_wlvif); } - if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) - wlcore_event_sched_scan_report(wl, - mbox->scheduled_scan_status); + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", + mbox->scheduled_scan_status); + + wlcore_scan_sched_scan_results(wl); + } if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) wlcore_event_sched_scan_completed(wl, diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c index 02ef5aa..c9199d7 100644 --- a/drivers/net/wireless/ti/wl18xx/event.c +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -61,6 +61,14 @@ int wl18xx_process_mailbox_events(struct wl1271 *wl) wl18xx_scan_completed(wl, wl->scan_wlvif); } + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "PERIODIC_SCAN_REPORT_EVENT (results %d)", + mbox->number_of_sched_scan_results); + + wlcore_scan_sched_scan_results(wl); + } + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) wlcore_event_sched_scan_completed(wl, 1); diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h index b55fd31..398f3d2 100644 --- a/drivers/net/wireless/ti/wl18xx/event.h +++ b/drivers/net/wireless/ti/wl18xx/event.h @@ -37,6 +37,7 @@ enum { BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(17), REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(18), DFS_CHANNELS_CONFIG_COMPLETE_EVENT = BIT(19), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(20), }; struct wl18xx_event_mailbox { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0ff9bc7..ec331e9 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -890,6 +890,7 @@ static int wl18xx_boot(struct wl1271 *wl) SCAN_COMPLETE_EVENT_ID | RSSI_SNR_TRIGGER_0_EVENT_ID | PERIODIC_SCAN_COMPLETE_EVENT_ID | + PERIODIC_SCAN_REPORT_EVENT_ID | DUMMY_PACKET_EVENT_ID | PEER_REMOVE_COMPLETE_EVENT_ID | BA_SESSION_RX_CONSTRAINT_EVENT_ID | diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index 1df88d5..09d9445 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -227,6 +227,10 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl, cmd->tag = WL1271_SCAN_DEFAULT_TAG; + /* create a PERIODIC_SCAN_REPORT_EVENT whenever we've got a match */ + cmd->report_threshold = 1; + cmd->terminate_on_report = 0; + if (cmd->active[0]) { u8 band = IEEE80211_BAND_2GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h index 5eb8c7f..eadee42 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.h +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -78,8 +78,7 @@ struct wl18xx_cmd_scan_params { __le16 long_cycles_sec; u8 short_cycles_count; u8 total_cycles; /* 0 - infinite */ - u8 rate; - u8 padding[1]; + u8 padding[2]; union { struct { @@ -93,7 +92,20 @@ struct wl18xx_cmd_scan_params { u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ u8 tag; - u8 padding1[2]; + u8 rate; + + /* send SCAN_REPORT_EVENT in periodic scans after each cycle + * if number of results >= report_threshold. Must be 0 for + * non periodic scans + */ + u8 report_threshold; + + /* Should periodic scan stop after a report event was created. + * Must be 0 for non periodic scans. + */ + u8 terminate_on_report; + + u8 padding1[3]; } __packed; struct wl18xx_cmd_scan_stop { diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index 2776d95..70f289a 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -94,16 +94,6 @@ void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable) } EXPORT_SYMBOL_GPL(wlcore_event_soft_gemini_sense); -void wlcore_event_sched_scan_report(struct wl1271 *wl, - u8 status) -{ - wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", - status); - - wl1271_scan_sched_scan_results(wl); -} -EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_report); - void wlcore_event_sched_scan_completed(struct wl1271 *wl, u8 status) { diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h index b4353be..acc7a59 100644 --- a/drivers/net/wireless/ti/wlcore/event.h +++ b/drivers/net/wireless/ti/wlcore/event.h @@ -70,8 +70,6 @@ int wl1271_event_unmask(struct wl1271 *wl); int wl1271_event_handle(struct wl1271 *wl, u8 mbox); void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable); -void wlcore_event_sched_scan_report(struct wl1271 *wl, - u8 status); void wlcore_event_sched_scan_completed(struct wl1271 *wl, u8 status); void wlcore_event_ba_rx_constraint(struct wl1271 *wl, diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 6cfdeae..f407101 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -460,9 +460,10 @@ out: } EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_ssid_list); -void wl1271_scan_sched_scan_results(struct wl1271 *wl) +void wlcore_scan_sched_scan_results(struct wl1271 *wl) { wl1271_debug(DEBUG_SCAN, "got periodic scan results"); ieee80211_sched_scan_results(wl->hw); } +EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_results); diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 9ae6065..a6ab24b 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -39,7 +39,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif); -void wl1271_scan_sched_scan_results(struct wl1271 *wl); +void wlcore_scan_sched_scan_results(struct wl1271 *wl); #define WL1271_SCAN_MAX_CHANNELS 24 #define WL1271_SCAN_DEFAULT_TAG 1 -- cgit v0.10.2 From 2fd8a3bb49400a4a0fe9d9cd9d49019e7a46403e Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:48 +0200 Subject: wl18xx: count HW block spare based correctly on keys We have no idea how many VIFs there are requiring a special spare, we know just about the number of keys set. Rename the counter appropriately and toggle it whenever a special key is added/removed. Previously this was only changed once, since it was toggled whenever the actual spare was changed. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index ec331e9..6b57686 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1021,7 +1021,7 @@ static int wl18xx_hw_init(struct wl1271 *wl) /* (re)init private structures. Relevant on recovery as well. */ priv->last_fw_rls_idx = 0; - priv->extra_spare_vif_count = 0; + priv->extra_spare_key_count = 0; /* set the default amount of spare blocks in the bitmap */ ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); @@ -1285,8 +1285,8 @@ static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) { struct wl18xx_priv *priv = wl->priv; - /* If we have VIFs requiring extra spare, indulge them */ - if (priv->extra_spare_vif_count) + /* If we have keys requiring extra spare, indulge them */ + if (priv->extra_spare_key_count) return WL18XX_TX_HW_EXTRA_BLOCK_SPARE; return WL18XX_TX_HW_BLOCK_SPARE; @@ -1298,42 +1298,48 @@ static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_key_conf *key_conf) { struct wl18xx_priv *priv = wl->priv; - bool change_spare = false; + bool change_spare = false, special_enc; int ret; + wl1271_debug(DEBUG_CRYPT, "extra spare keys before: %d", + priv->extra_spare_key_count); + + special_enc = key_conf->cipher == WL1271_CIPHER_SUITE_GEM || + key_conf->cipher == WLAN_CIPHER_SUITE_TKIP; + + ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); + if (ret < 0) + goto out; + /* - * when adding the first or removing the last GEM/TKIP interface, + * when adding the first or removing the last GEM/TKIP key, * we have to adjust the number of spare blocks. */ - change_spare = (key_conf->cipher == WL1271_CIPHER_SUITE_GEM || - key_conf->cipher == WLAN_CIPHER_SUITE_TKIP) && - ((priv->extra_spare_vif_count == 0 && cmd == SET_KEY) || - (priv->extra_spare_vif_count == 1 && cmd == DISABLE_KEY)); + if (special_enc) { + if (cmd == SET_KEY) { + /* first key */ + change_spare = (priv->extra_spare_key_count == 0); + priv->extra_spare_key_count++; + } else if (cmd == DISABLE_KEY) { + /* last key */ + change_spare = (priv->extra_spare_key_count == 1); + priv->extra_spare_key_count--; + } + } - /* no need to change spare - just regular set_key */ - if (!change_spare) - return wlcore_set_key(wl, cmd, vif, sta, key_conf); + wl1271_debug(DEBUG_CRYPT, "extra spare keys after: %d", + priv->extra_spare_key_count); - ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); - if (ret < 0) + if (!change_spare) goto out; /* key is now set, change the spare blocks */ - if (cmd == SET_KEY) { + if (priv->extra_spare_key_count) ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_EXTRA_BLOCK_SPARE); - if (ret < 0) - goto out; - - priv->extra_spare_vif_count++; - } else { + else ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); - if (ret < 0) - goto out; - - priv->extra_spare_vif_count--; - } out: return ret; diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index e6ea78c..b6739e7 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -49,8 +49,8 @@ struct wl18xx_priv { /* Index of last released Tx desc in FW */ u8 last_fw_rls_idx; - /* number of VIFs requiring extra spare mem-blocks */ - int extra_spare_vif_count; + /* number of keys requiring extra spare mem-blocks */ + int extra_spare_key_count; }; #define WL18XX_FW_MAX_TX_STATUS_DESC 33 -- cgit v0.10.2 From 2e07d02828759a506b5205b2cff40daa58df5bf7 Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Wed, 28 Nov 2012 11:42:49 +0200 Subject: wlcore: Always pass DMA-able buffers to mmc functions Some of the mmc drivers initiate DMA transfers with buffers passed from higher layers. This means that the driver shouldn't ever pass non DMA-able buffers, such as ones that are unaligned, allocated on the stack or static. Fix a couple of calls to the mmc layer in which buffers which weren't necessarily DMA-able were passed. [Use sizeof(*wl->buffer_32) instead of sizeof(u32) -- Luca] Signed-off-by: Ido Yariv Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 6d4a021..5b023a5 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -613,7 +613,7 @@ static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len) if (wl->chip.id != CHIP_ID_128X_PG20) { struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; - struct wl127x_rx_mem_pool_addr rx_mem_addr; + struct wl12xx_priv *priv = wl->priv; /* * Choose the block we want to read @@ -622,13 +622,13 @@ static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len) */ u32 mem_block = rx_desc & RX_MEM_BLOCK_MASK; - rx_mem_addr.addr = (mem_block << 8) + + priv->rx_mem_addr->addr = (mem_block << 8) + le32_to_cpu(wl_mem_map->packet_memory_pool_start); - rx_mem_addr.addr_extra = rx_mem_addr.addr + 4; + priv->rx_mem_addr->addr_extra = priv->rx_mem_addr->addr + 4; - ret = wlcore_write(wl, WL1271_SLV_REG_DATA, &rx_mem_addr, - sizeof(rx_mem_addr), false); + ret = wlcore_write(wl, WL1271_SLV_REG_DATA, priv->rx_mem_addr, + sizeof(*priv->rx_mem_addr), false); if (ret < 0) return ret; } @@ -1761,6 +1761,10 @@ static int wl12xx_setup(struct wl1271 *wl) wl1271_error("Invalid tcxo parameter %s", tcxo_param); } + priv->rx_mem_addr = kmalloc(sizeof(*priv->rx_mem_addr), GFP_KERNEL); + if (!priv->rx_mem_addr) + return -ENOMEM; + return 0; } @@ -1794,6 +1798,21 @@ out: return ret; } +static int __devexit wl12xx_remove(struct platform_device *pdev) +{ + struct wl1271 *wl = platform_get_drvdata(pdev); + struct wl12xx_priv *priv; + + if (!wl) + goto out; + priv = wl->priv; + + kfree(priv->rx_mem_addr); + +out: + return wlcore_remove(pdev); +} + static const struct platform_device_id wl12xx_id_table[] __devinitconst = { { "wl12xx", 0 }, { } /* Terminating Entry */ @@ -1802,7 +1821,7 @@ MODULE_DEVICE_TABLE(platform, wl12xx_id_table); static struct platform_driver wl12xx_driver = { .probe = wl12xx_probe, - .remove = __devexit_p(wlcore_remove), + .remove = __devexit_p(wl12xx_remove), .id_table = wl12xx_id_table, .driver = { .name = "wl12xx_driver", diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index a07be5e..d455285 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -73,6 +73,8 @@ struct wl12xx_priv { int ref_clock; int tcxo_clock; + + struct wl127x_rx_mem_pool_addr *rx_mem_addr; }; #endif /* __WL12XX_PRIV_H__ */ diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h index f48530f..af7d9f9 100644 --- a/drivers/net/wireless/ti/wlcore/io.h +++ b/drivers/net/wireless/ti/wlcore/io.h @@ -105,13 +105,13 @@ static inline int __must_check wlcore_raw_read32(struct wl1271 *wl, int addr, { int ret; - ret = wlcore_raw_read(wl, addr, &wl->buffer_32, - sizeof(wl->buffer_32), false); + ret = wlcore_raw_read(wl, addr, wl->buffer_32, + sizeof(*wl->buffer_32), false); if (ret < 0) return ret; if (val) - *val = le32_to_cpu(wl->buffer_32); + *val = le32_to_cpu(*wl->buffer_32); return 0; } @@ -119,9 +119,9 @@ static inline int __must_check wlcore_raw_read32(struct wl1271 *wl, int addr, static inline int __must_check wlcore_raw_write32(struct wl1271 *wl, int addr, u32 val) { - wl->buffer_32 = cpu_to_le32(val); - return wlcore_raw_write(wl, addr, &wl->buffer_32, - sizeof(wl->buffer_32), false); + *wl->buffer_32 = cpu_to_le32(val); + return wlcore_raw_write(wl, addr, wl->buffer_32, + sizeof(*wl->buffer_32), false); } static inline int __must_check wlcore_read(struct wl1271 *wl, int addr, diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 227c571..0e599c9 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5860,8 +5860,17 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, goto err_fwlog; } + wl->buffer_32 = kmalloc(sizeof(*wl->buffer_32), GFP_KERNEL); + if (!wl->buffer_32) { + ret = -ENOMEM; + goto err_mbox; + } + return hw; +err_mbox: + kfree(wl->mbox); + err_fwlog: free_page((unsigned long)wl->fwlog); @@ -5900,6 +5909,7 @@ int wlcore_free_hw(struct wl1271 *wl) device_remove_file(wl->dev, &dev_attr_hw_pg_ver); device_remove_file(wl->dev, &dev_attr_bt_coex_state); + kfree(wl->buffer_32); kfree(wl->mbox); free_page((unsigned long)wl->fwlog); dev_kfree_skb(wl->dummy_packet); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 6c2fd03..118208a 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -334,7 +334,7 @@ struct wl1271 { struct wl1271_stats stats; - __le32 buffer_32; + __le32 *buffer_32; u32 buffer_cmd; u32 buffer_busyword[WL1271_BUSY_WORD_CNT]; -- cgit v0.10.2 From b5a05550b76fe5b934b6f3b7f4b36ae9513745f6 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 20 Dec 2012 09:11:24 +0000 Subject: bnx2x: use ARRAY_SIZE where possible Signed-off-by: Sasha Levin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 09096b4..cb41f54 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3659,7 +3659,7 @@ static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_CL49_USERB0_CTRL, (3<<6)); - for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -3713,7 +3713,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, }; DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); /* Set to default registers that may be overriden by 10G force */ - for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -3854,7 +3854,7 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2} }; - for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -4242,7 +4242,7 @@ static void bnx2x_warpcore_clear_regs(struct bnx2x_phy *phy, bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, (3<<13)); - for (i = 0; i < sizeof(wc_regs)/sizeof(struct bnx2x_reg_set); i++) + for (i = 0; i < ARRAY_SIZE(wc_regs); i++) bnx2x_cl45_write(bp, phy, wc_regs[i].devad, wc_regs[i].reg, wc_regs[i].val); @@ -9520,7 +9520,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, } else { /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -9592,7 +9592,7 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, val); - for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -13395,7 +13395,7 @@ static void bnx2x_disable_kr2(struct link_params *params, }; DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); - for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; -- cgit v0.10.2 From 4bf84c35c65f36a344fb7a6cde6274df4120efb8 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 27 Dec 2012 23:49:37 +0000 Subject: net: add change_carrier netdev op This allows a driver to register change_carrier callback which will be called whenever user will like to change carrier state. This is useful for devices like dummy, gre, team and so on. Signed-off-by: Jiri Pirko Acked-by: Flavio Leitner Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c599e47..0e1b92a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -891,6 +891,14 @@ struct netdev_fcoe_hbainfo { * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh) * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, * struct net_device *dev) + * + * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier); + * Called to change device carrier. Soft-devices (like dummy, team, etc) + * which do not represent real hardware may define this to allow their + * userspace components to manage their virtual carrier state. Devices + * that determine carrier state from physical hardware properties (eg + * network cables) or protocol-dependent mechanisms (eg + * USB_CDC_NOTIFY_NETWORK_CONNECTION) should NOT implement this function. */ struct net_device_ops { int (*ndo_init)(struct net_device *dev); @@ -1008,6 +1016,8 @@ struct net_device_ops { int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev); + int (*ndo_change_carrier)(struct net_device *dev, + bool new_carrier); }; /* @@ -2194,6 +2204,8 @@ extern int dev_set_mtu(struct net_device *, int); extern void dev_set_group(struct net_device *, int); extern int dev_set_mac_address(struct net_device *, struct sockaddr *); +extern int dev_change_carrier(struct net_device *, + bool new_carrier); extern int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev, struct netdev_queue *txq); diff --git a/net/core/dev.c b/net/core/dev.c index 515473e..21c5b97 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5027,6 +5027,25 @@ int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa) } EXPORT_SYMBOL(dev_set_mac_address); +/** + * dev_change_carrier - Change device carrier + * @dev: device + * @new_carries: new value + * + * Change device carrier + */ +int dev_change_carrier(struct net_device *dev, bool new_carrier) +{ + const struct net_device_ops *ops = dev->netdev_ops; + + if (!ops->ndo_change_carrier) + return -EOPNOTSUPP; + if (!netif_device_present(dev)) + return -ENODEV; + return ops->ndo_change_carrier(dev, new_carrier); +} +EXPORT_SYMBOL(dev_change_carrier); + /* * Perform the SIOCxIFxxx calls, inside rcu_read_lock() */ -- cgit v0.10.2 From fdae0fde5352790030d89edd09f1b43b9bed97f8 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 27 Dec 2012 23:49:38 +0000 Subject: net: allow to change carrier via sysfs Make carrier writable Signed-off-by: Jiri Pirko Acked-by: Flavio Leitner Signed-off-by: David S. Miller diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 28c5f5a..29c884a 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -126,6 +126,19 @@ static ssize_t show_broadcast(struct device *dev, return -EINVAL; } +static int change_carrier(struct net_device *net, unsigned long new_carrier) +{ + if (!netif_running(net)) + return -EINVAL; + return dev_change_carrier(net, (bool) new_carrier); +} + +static ssize_t store_carrier(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + return netdev_store(dev, attr, buf, len, change_carrier); +} + static ssize_t show_carrier(struct device *dev, struct device_attribute *attr, char *buf) { @@ -331,7 +344,7 @@ static struct device_attribute net_class_attributes[] = { __ATTR(link_mode, S_IRUGO, show_link_mode, NULL), __ATTR(address, S_IRUGO, show_address, NULL), __ATTR(broadcast, S_IRUGO, show_broadcast, NULL), - __ATTR(carrier, S_IRUGO, show_carrier, NULL), + __ATTR(carrier, S_IRUGO | S_IWUSR, show_carrier, store_carrier), __ATTR(speed, S_IRUGO, show_speed, NULL), __ATTR(duplex, S_IRUGO, show_duplex, NULL), __ATTR(dormant, S_IRUGO, show_dormant, NULL), -- cgit v0.10.2 From 9a57247f31e361f80508c40363366222dbbb6aa5 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 27 Dec 2012 23:49:39 +0000 Subject: rtnl: expose carrier value with possibility to set it Signed-off-by: Jiri Pirko Acked-by: Flavio Leitner Signed-off-by: David S. Miller diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt index 1a77a3c..9769457 100644 --- a/Documentation/networking/operstates.txt +++ b/Documentation/networking/operstates.txt @@ -88,6 +88,10 @@ set this flag. On netif_carrier_off(), the scheduler stops sending packets. The name 'carrier' and the inversion are historical, think of it as lower layer. +Note that for certain kind of soft-devices, which are not managing any +real hardware, there is possible to set this bit from userpsace. +One should use TVL IFLA_CARRIER to do so. + netif_carrier_ok() can be used to query that bit. __LINK_STATE_DORMANT, maps to IFF_DORMANT: diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 60f3b6b..c4edfe1 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -142,6 +142,7 @@ enum { #define IFLA_PROMISCUITY IFLA_PROMISCUITY IFLA_NUM_TX_QUEUES, IFLA_NUM_RX_QUEUES, + IFLA_CARRIER, __IFLA_MAX }; diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 1868625..2ef7a56 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -780,6 +780,7 @@ static noinline size_t if_nlmsg_size(const struct net_device *dev, + nla_total_size(4) /* IFLA_MTU */ + nla_total_size(4) /* IFLA_LINK */ + nla_total_size(4) /* IFLA_MASTER */ + + nla_total_size(1) /* IFLA_CARRIER */ + nla_total_size(4) /* IFLA_PROMISCUITY */ + nla_total_size(4) /* IFLA_NUM_TX_QUEUES */ + nla_total_size(4) /* IFLA_NUM_RX_QUEUES */ @@ -909,6 +910,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, nla_put_u32(skb, IFLA_LINK, dev->iflink)) || (dev->master && nla_put_u32(skb, IFLA_MASTER, dev->master->ifindex)) || + nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) || (dev->qdisc && nla_put_string(skb, IFLA_QDISC, dev->qdisc->ops->id)) || (dev->ifalias && @@ -1108,6 +1110,7 @@ const struct nla_policy ifla_policy[IFLA_MAX+1] = { [IFLA_MTU] = { .type = NLA_U32 }, [IFLA_LINK] = { .type = NLA_U32 }, [IFLA_MASTER] = { .type = NLA_U32 }, + [IFLA_CARRIER] = { .type = NLA_U8 }, [IFLA_TXQLEN] = { .type = NLA_U32 }, [IFLA_WEIGHT] = { .type = NLA_U32 }, [IFLA_OPERSTATE] = { .type = NLA_U8 }, @@ -1438,6 +1441,13 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, modified = 1; } + if (tb[IFLA_CARRIER]) { + err = dev_change_carrier(dev, nla_get_u8(tb[IFLA_CARRIER])); + if (err) + goto errout; + modified = 1; + } + if (tb[IFLA_TXQLEN]) dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]); -- cgit v0.10.2 From 210ab6656fa8c49d7238c13f85ed551ebab94fb0 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 27 Dec 2012 23:49:40 +0000 Subject: dummy: implement carrier change Signed-off-by: Jiri Pirko Acked-by: Flavio Leitner Signed-off-by: David S. Miller diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c index c260af5..42aa54a 100644 --- a/drivers/net/dummy.c +++ b/drivers/net/dummy.c @@ -100,6 +100,15 @@ static void dummy_dev_uninit(struct net_device *dev) free_percpu(dev->dstats); } +static int dummy_change_carrier(struct net_device *dev, bool new_carrier) +{ + if (new_carrier) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + static const struct net_device_ops dummy_netdev_ops = { .ndo_init = dummy_dev_init, .ndo_uninit = dummy_dev_uninit, @@ -108,6 +117,7 @@ static const struct net_device_ops dummy_netdev_ops = { .ndo_set_rx_mode = set_multicast_list, .ndo_set_mac_address = eth_mac_addr, .ndo_get_stats64 = dummy_get_stats64, + .ndo_change_carrier = dummy_change_carrier, }; static void dummy_setup(struct net_device *dev) -- cgit v0.10.2 From b2111724a639ec31a19fdca62ea3a0a222d59d11 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 28 Dec 2012 06:06:37 +0000 Subject: net: use per task frag allocator in skb_append_datato_frags Use the new per task frag allocator in skb_append_datato_frags(), to reduce number of frags and page allocator overhead. Tested: ifconfig lo mtu 16436 perf record netperf -t UDP_STREAM ; perf report before : Throughput: 32928 Mbit/s 51.79% netperf [kernel.kallsyms] [k] copy_user_generic_string 5.98% netperf [kernel.kallsyms] [k] __alloc_pages_nodemask 5.58% netperf [kernel.kallsyms] [k] get_page_from_freelist 5.01% netperf [kernel.kallsyms] [k] __rmqueue 3.74% netperf [kernel.kallsyms] [k] skb_append_datato_frags 1.87% netperf [kernel.kallsyms] [k] prep_new_page 1.42% netperf [kernel.kallsyms] [k] next_zones_zonelist 1.28% netperf [kernel.kallsyms] [k] __inc_zone_state 1.26% netperf [kernel.kallsyms] [k] alloc_pages_current 0.78% netperf [kernel.kallsyms] [k] sock_alloc_send_pskb 0.74% netperf [kernel.kallsyms] [k] udp_sendmsg 0.72% netperf [kernel.kallsyms] [k] zone_watermark_ok 0.68% netperf [kernel.kallsyms] [k] __cpuset_node_allowed_softwall 0.67% netperf [kernel.kallsyms] [k] fib_table_lookup 0.60% netperf [kernel.kallsyms] [k] memcpy_fromiovecend 0.55% netperf [kernel.kallsyms] [k] __udp4_lib_lookup after: Throughput: 47185 Mbit/s 61.74% netperf [kernel.kallsyms] [k] copy_user_generic_string 2.07% netperf [kernel.kallsyms] [k] prep_new_page 1.98% netperf [kernel.kallsyms] [k] skb_append_datato_frags 1.02% netperf [kernel.kallsyms] [k] sock_alloc_send_pskb 0.97% netperf [kernel.kallsyms] [k] enqueue_task_fair 0.97% netperf [kernel.kallsyms] [k] udp_sendmsg 0.91% netperf [kernel.kallsyms] [k] __ip_route_output_key 0.88% netperf [kernel.kallsyms] [k] __netif_receive_skb 0.87% netperf [kernel.kallsyms] [k] fib_table_lookup 0.85% netperf [kernel.kallsyms] [k] resched_task 0.78% netperf [kernel.kallsyms] [k] __udp4_lib_lookup 0.77% netperf [kernel.kallsyms] [k] _raw_spin_lock_irqsave Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 3ab989b..ec8737e 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2686,48 +2686,37 @@ int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, int len, int odd, struct sk_buff *skb), void *from, int length) { - int frg_cnt = 0; - skb_frag_t *frag = NULL; - struct page *page = NULL; - int copy, left; + int frg_cnt = skb_shinfo(skb)->nr_frags; + int copy; int offset = 0; int ret; + struct page_frag *pfrag = ¤t->task_frag; do { /* Return error if we don't have space for new frag */ - frg_cnt = skb_shinfo(skb)->nr_frags; if (frg_cnt >= MAX_SKB_FRAGS) - return -EFAULT; - - /* allocate a new page for next frag */ - page = alloc_pages(sk->sk_allocation, 0); + return -EMSGSIZE; - /* If alloc_page fails just return failure and caller will - * free previous allocated pages by doing kfree_skb() - */ - if (page == NULL) + if (!sk_page_frag_refill(sk, pfrag)) return -ENOMEM; - /* initialize the next frag */ - skb_fill_page_desc(skb, frg_cnt, page, 0, 0); - skb->truesize += PAGE_SIZE; - atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc); - - /* get the new initialized frag */ - frg_cnt = skb_shinfo(skb)->nr_frags; - frag = &skb_shinfo(skb)->frags[frg_cnt - 1]; - /* copy the user data to page */ - left = PAGE_SIZE - frag->page_offset; - copy = (length > left)? left : length; + copy = min_t(int, length, pfrag->size - pfrag->offset); - ret = getfrag(from, skb_frag_address(frag) + skb_frag_size(frag), - offset, copy, 0, skb); + ret = getfrag(from, page_address(pfrag->page) + pfrag->offset, + offset, copy, 0, skb); if (ret < 0) return -EFAULT; /* copy was successful so update the size parameters */ - skb_frag_size_add(frag, copy); + skb_fill_page_desc(skb, frg_cnt, pfrag->page, pfrag->offset, + copy); + frg_cnt++; + pfrag->offset += copy; + get_page(pfrag->page); + + skb->truesize += copy; + atomic_add(copy, &sk->sk_wmem_alloc); skb->len += copy; skb->data_len += copy; offset += copy; -- cgit v0.10.2 From bd2a13e2ebedc084ca4d5bc77e8ed03cf793a130 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 28 Dec 2012 18:18:55 +0000 Subject: sctp: make sctp_addr_wq_timeout_handler static Fix sparse warning about local function that should be static. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index f898b1c..1c2e46c 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -595,7 +595,7 @@ static void sctp_v4_ecn_capable(struct sock *sk) INET_ECN_xmit(sk); } -void sctp_addr_wq_timeout_handler(unsigned long arg) +static void sctp_addr_wq_timeout_handler(unsigned long arg) { struct net *net = (struct net *)arg; struct sctp_sockaddr_entry *addrw, *temp; -- cgit v0.10.2 From bb717d764926b8748aecd18e3531189b323f6e4d Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 28 Dec 2012 18:20:24 +0000 Subject: tcp: make proc_tcp_fastopen_key static Detected by sparse. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index d84400b..7547a6d 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -232,8 +232,8 @@ static int ipv4_tcp_mem(ctl_table *ctl, int write, return 0; } -int proc_tcp_fastopen_key(ctl_table *ctl, int write, void __user *buffer, - size_t *lenp, loff_t *ppos) +static int proc_tcp_fastopen_key(ctl_table *ctl, int write, void __user *buffer, + size_t *lenp, loff_t *ppos) { ctl_table tbl = { .maxlen = (TCP_FASTOPEN_KEY_LENGTH * 2 + 10) }; struct tcp_fastopen_context *ctxt; -- cgit v0.10.2 From 61c5e88aecd6fbf2480f39394bb495964e6d9984 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 28 Dec 2012 18:24:28 +0000 Subject: skbuff: make __kmalloc_reserve static Sparse detected case where this local function should be static. It may even allow some compiler optimizations. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ec8737e..bc96100 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -155,8 +155,9 @@ static void skb_under_panic(struct sk_buff *skb, int sz, void *here) */ #define kmalloc_reserve(size, gfp, node, pfmemalloc) \ __kmalloc_reserve(size, gfp, node, _RET_IP_, pfmemalloc) -void *__kmalloc_reserve(size_t size, gfp_t flags, int node, unsigned long ip, - bool *pfmemalloc) + +static void *__kmalloc_reserve(size_t size, gfp_t flags, int node, + unsigned long ip, bool *pfmemalloc) { void *obj; bool ret_pfmemalloc = false; -- cgit v0.10.2 From aa1113d9f85da59dcbdd32aeb5d71da566e46def Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 28 Dec 2012 10:50:17 +0000 Subject: net: filter: return -EINVAL if BPF_S_ANC* operation is not supported Currently, we return -EINVAL for malformed or wrong BPF filters. However, this is not done for BPF_S_ANC* operations, which makes it more difficult to detect if it's actually supported or not by the BPF machine. Therefore, we should also return -EINVAL if K is within the SKF_AD_OFF universe and the ancillary operation did not match. Why exactly is it needed? If tools such as libpcap/tcpdump want to make use of new ancillary operations (like filtering VLAN in kernel space), there is currently no sane way to test if this feature / BPF_S_ANC* op is present or not, since no error is returned. This patch will make life easier for that and allow for a proper usage for user space applications. There was concern, if this patch will break userland. Short answer: Yes and no. Long answer: It will "break" only for code that calls ... { BPF_LD | BPF_(W|H|B) | BPF_ABS, 0, 0, }, ... where is in [0xfffff000, 0xffffffff] _and_ is *not* an ancillary. And here comes the BUT: assuming some *old* code will have such an instruction where is between [0xfffff000, 0xffffffff] and it doesn't know ancillary operations, then this will give a non-expected / unwanted behavior as well (since we do not return the BPF machine with 0 after a failed load_pointer(), which was the case before introducing ancillary operations, but load sth. into the accumulator instead, and continue with the next instruction, for instance). Thus, user space code would already have been broken by introducing ancillary operations into the BPF machine per se. Code that does such a direct load, e.g. "load word at packet offset 0xffffffff into accumulator" ("ld [0xffffffff]") is quite broken, isn't it? The whole assumption of ancillary operations is that no-one intentionally calls things like "ld [0xffffffff]" and expect this word to be loaded from such a packet offset. Hence, we can also safely make use of this feature testing patch and facilitate application development. Therefore, at least from this patch onwards, we have *for sure* a check whether current or in future implemented BPF_S_ANC* ops are supported in the kernel. Patch was tested on x86_64. (Thanks to Eric for the previous review.) Cc: Eric Dumazet Reported-by: Ani Sinha Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/net/core/filter.c b/net/core/filter.c index c23543c..2ead2a9 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -532,6 +532,7 @@ int sk_chk_filter(struct sock_filter *filter, unsigned int flen) [BPF_JMP|BPF_JSET|BPF_X] = BPF_S_JMP_JSET_X, }; int pc; + bool anc_found; if (flen == 0 || flen > BPF_MAXINSNS) return -EINVAL; @@ -592,8 +593,10 @@ int sk_chk_filter(struct sock_filter *filter, unsigned int flen) case BPF_S_LD_W_ABS: case BPF_S_LD_H_ABS: case BPF_S_LD_B_ABS: + anc_found = false; #define ANCILLARY(CODE) case SKF_AD_OFF + SKF_AD_##CODE: \ code = BPF_S_ANC_##CODE; \ + anc_found = true; \ break switch (ftest->k) { ANCILLARY(PROTOCOL); @@ -610,6 +613,10 @@ int sk_chk_filter(struct sock_filter *filter, unsigned int flen) ANCILLARY(VLAN_TAG); ANCILLARY(VLAN_TAG_PRESENT); } + + /* ancillary operation unknown or unsupported */ + if (anc_found == false && ftest->k >= SKF_AD_OFF) + return -EINVAL; } ftest->code = code; } -- cgit v0.10.2 From 576eb62598f10c8c7fd75703fe89010cdcfff596 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 28 Dec 2012 18:15:22 +0000 Subject: bridge: respect RFC2863 operational state The bridge link detection should follow the operational state of the lower device, rather than the carrier bit. This allows devices like tunnels that are controlled by userspace control plane to work with bridge STP link management. Signed-off-by: Stephen Hemminger Reviewed-by: Flavio Leitner Signed-off-by: David S. Miller diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 37fe693..1edd71d 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -66,14 +66,14 @@ void br_port_carrier_check(struct net_bridge_port *p) struct net_device *dev = p->dev; struct net_bridge *br = p->br; - if (netif_running(dev) && netif_carrier_ok(dev)) + if (netif_running(dev) && netif_oper_up(dev)) p->path_cost = port_cost(dev); if (!netif_running(br->dev)) return; spin_lock_bh(&br->lock); - if (netif_running(dev) && netif_carrier_ok(dev)) { + if (netif_running(dev) && netif_oper_up(dev)) { if (p->state == BR_STATE_DISABLED) br_stp_enable_port(p); } else { @@ -383,7 +383,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) spin_lock_bh(&br->lock); changed_addr = br_stp_recalculate_bridge_id(br); - if ((dev->flags & IFF_UP) && netif_carrier_ok(dev) && + if (netif_running(dev) && netif_oper_up(dev) && (br->dev->flags & IFF_UP)) br_stp_enable_port(p); spin_unlock_bh(&br->lock); diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 97ba018..caa3f69 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -181,8 +181,11 @@ static int br_set_port_state(struct net_bridge_port *p, u8 state) if (p->br->stp_enabled == BR_KERNEL_STP) return -EBUSY; + /* if device is not up, change is not allowed + * if link is not present, only allowable state is disabled + */ if (!netif_running(p->dev) || - (!netif_carrier_ok(p->dev) && state != BR_STATE_DISABLED)) + (!netif_oper_up(p->dev) && state != BR_STATE_DISABLED)) return -ENETDOWN; p->state = state; diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c index a76b621..1644b3e 100644 --- a/net/bridge/br_notify.c +++ b/net/bridge/br_notify.c @@ -82,7 +82,7 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v break; case NETDEV_UP: - if (netif_carrier_ok(dev) && (br->dev->flags & IFF_UP)) { + if (netif_running(br->dev) && netif_oper_up(dev)) { spin_lock_bh(&br->lock); br_stp_enable_port(p); spin_unlock_bh(&br->lock); diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c index 9d5a414..7b5197c 100644 --- a/net/bridge/br_stp_if.c +++ b/net/bridge/br_stp_if.c @@ -54,7 +54,7 @@ void br_stp_enable_bridge(struct net_bridge *br) br_config_bpdu_generation(br); list_for_each_entry(p, &br->port_list, list) { - if ((p->dev->flags & IFF_UP) && netif_carrier_ok(p->dev)) + if (netif_running(p->dev) && netif_oper_up(p->dev)) br_stp_enable_port(p); } -- cgit v0.10.2 From 4cafe373d40dd9893a301fa83dc99abb80a2bd0b Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Sat, 29 Dec 2012 15:31:01 +0000 Subject: team: implement carrier change The user space teamd daemon may need to control the master's carrier state depending on the selected mode. Signed-off-by: Flavio Leitner Acked-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index ad86660..27a6ede 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1707,6 +1707,15 @@ static netdev_features_t team_fix_features(struct net_device *dev, return features; } +static int team_change_carrier(struct net_device *dev, bool new_carrier) +{ + if (new_carrier) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + static const struct net_device_ops team_netdev_ops = { .ndo_init = team_init, .ndo_uninit = team_uninit, @@ -1729,6 +1738,7 @@ static const struct net_device_ops team_netdev_ops = { .ndo_add_slave = team_add_slave, .ndo_del_slave = team_del_slave, .ndo_fix_features = team_fix_features, + .ndo_change_carrier = team_change_carrier, }; -- cgit v0.10.2 From 2681128f0ced8aa4e66f221197e183cc16d244fe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 29 Dec 2012 16:02:43 +0000 Subject: veth: reduce stat overhead veth stats are a bit bloated. There is no need to account transmit and receive stats, since they are absolutely symmetric. Also use a per device atomic64_t for the dropped counter, as it should never be used in fast path. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 95814d9..c048f8d 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -25,18 +25,15 @@ #define MIN_MTU 68 /* Min L3 MTU */ #define MAX_MTU 65535 /* Max L3 MTU (arbitrary) */ -struct veth_net_stats { - u64 rx_packets; - u64 rx_bytes; - u64 tx_packets; - u64 tx_bytes; - u64 rx_dropped; +struct pcpu_vstats { + u64 packets; + u64 bytes; struct u64_stats_sync syncp; }; struct veth_priv { - struct net_device *peer; - struct veth_net_stats __percpu *stats; + struct net_device *peer; + atomic64_t dropped; }; /* @@ -107,50 +104,30 @@ static const struct ethtool_ops veth_ethtool_ops = { .get_ethtool_stats = veth_get_ethtool_stats, }; -/* - * xmit - */ - static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) { - struct net_device *rcv = NULL; - struct veth_priv *priv, *rcv_priv; - struct veth_net_stats *stats, *rcv_stats; - int length; - - priv = netdev_priv(dev); - rcv = priv->peer; - rcv_priv = netdev_priv(rcv); - - stats = this_cpu_ptr(priv->stats); - rcv_stats = this_cpu_ptr(rcv_priv->stats); + struct veth_priv *priv = netdev_priv(dev); + struct net_device *rcv = priv->peer; + int length = skb->len; /* don't change ip_summed == CHECKSUM_PARTIAL, as that - will cause bad checksum on forwarded packets */ + * will cause bad checksum on forwarded packets + */ if (skb->ip_summed == CHECKSUM_NONE && rcv->features & NETIF_F_RXCSUM) skb->ip_summed = CHECKSUM_UNNECESSARY; - length = skb->len; - if (dev_forward_skb(rcv, skb) != NET_RX_SUCCESS) - goto rx_drop; - - u64_stats_update_begin(&stats->syncp); - stats->tx_bytes += length; - stats->tx_packets++; - u64_stats_update_end(&stats->syncp); + if (likely(dev_forward_skb(rcv, skb) == NET_RX_SUCCESS)) { + struct pcpu_vstats *stats = this_cpu_ptr(dev->vstats); - u64_stats_update_begin(&rcv_stats->syncp); - rcv_stats->rx_bytes += length; - rcv_stats->rx_packets++; - u64_stats_update_end(&rcv_stats->syncp); - - return NETDEV_TX_OK; + u64_stats_update_begin(&stats->syncp); + stats->bytes += length; + stats->packets++; + u64_stats_update_end(&stats->syncp); + } else { + atomic64_inc(&priv->dropped); + } -rx_drop: - u64_stats_update_begin(&rcv_stats->syncp); - rcv_stats->rx_dropped++; - u64_stats_update_end(&rcv_stats->syncp); return NETDEV_TX_OK; } @@ -158,32 +135,42 @@ rx_drop: * general routines */ -static struct rtnl_link_stats64 *veth_get_stats64(struct net_device *dev, - struct rtnl_link_stats64 *tot) +static u64 veth_stats_one(struct pcpu_vstats *result, struct net_device *dev) { struct veth_priv *priv = netdev_priv(dev); int cpu; + result->packets = 0; + result->bytes = 0; for_each_possible_cpu(cpu) { - struct veth_net_stats *stats = per_cpu_ptr(priv->stats, cpu); - u64 rx_packets, rx_bytes, rx_dropped; - u64 tx_packets, tx_bytes; + struct pcpu_vstats *stats = per_cpu_ptr(dev->vstats, cpu); + u64 packets, bytes; unsigned int start; do { start = u64_stats_fetch_begin_bh(&stats->syncp); - rx_packets = stats->rx_packets; - tx_packets = stats->tx_packets; - rx_bytes = stats->rx_bytes; - tx_bytes = stats->tx_bytes; - rx_dropped = stats->rx_dropped; + packets = stats->packets; + bytes = stats->bytes; } while (u64_stats_fetch_retry_bh(&stats->syncp, start)); - tot->rx_packets += rx_packets; - tot->tx_packets += tx_packets; - tot->rx_bytes += rx_bytes; - tot->tx_bytes += tx_bytes; - tot->rx_dropped += rx_dropped; + result->packets += packets; + result->bytes += bytes; } + return atomic64_read(&priv->dropped); +} + +static struct rtnl_link_stats64 *veth_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *tot) +{ + struct veth_priv *priv = netdev_priv(dev); + struct pcpu_vstats one; + + tot->tx_dropped = veth_stats_one(&one, dev); + tot->tx_bytes = one.bytes; + tot->tx_packets = one.packets; + + tot->rx_dropped = veth_stats_one(&one, priv->peer); + tot->rx_bytes = one.bytes; + tot->rx_packets = one.packets; return tot; } @@ -228,24 +215,16 @@ static int veth_change_mtu(struct net_device *dev, int new_mtu) static int veth_dev_init(struct net_device *dev) { - struct veth_net_stats __percpu *stats; - struct veth_priv *priv; - - stats = alloc_percpu(struct veth_net_stats); - if (stats == NULL) + dev->vstats = alloc_percpu(struct pcpu_vstats); + if (!dev->vstats) return -ENOMEM; - priv = netdev_priv(dev); - priv->stats = stats; return 0; } static void veth_dev_free(struct net_device *dev) { - struct veth_priv *priv; - - priv = netdev_priv(dev); - free_percpu(priv->stats); + free_percpu(dev->vstats); free_netdev(dev); } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0e1b92a..6835b58 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1284,6 +1284,7 @@ struct net_device { struct pcpu_lstats __percpu *lstats; /* loopback stats */ struct pcpu_tstats __percpu *tstats; /* tunnel stats */ struct pcpu_dstats __percpu *dstats; /* dummy stats */ + struct pcpu_vstats __percpu *vstats; /* veth stats */ }; /* GARP */ struct garp_port __rcu *garp_port; -- cgit v0.10.2 From 8093315a91340bca52549044975d8c7f673b28a1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 29 Dec 2012 16:26:10 +0000 Subject: veth: extend device features MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit veth is lacking most modern facilities, like SG, checksums, TSO. It makes sense to extend dev->features to get them, or GRO aggregation is defeated by a forced segmentation. Reported-by: Andrew Vagin Signed-off-by: Eric Dumazet Cc: Michał Mirosław Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index c048f8d..8b2e112 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -238,6 +238,10 @@ static const struct net_device_ops veth_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; +#define VETH_FEATURES (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \ + NETIF_F_HW_CSUM | NETIF_F_RXCSUM | NETIF_F_HIGHDMA | \ + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX) + static void veth_setup(struct net_device *dev) { ether_setup(dev); @@ -248,9 +252,10 @@ static void veth_setup(struct net_device *dev) dev->netdev_ops = &veth_netdev_ops; dev->ethtool_ops = &veth_ethtool_ops; dev->features |= NETIF_F_LLTX; + dev->features |= VETH_FEATURES; dev->destructor = veth_dev_free; - dev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_RXCSUM; + dev->hw_features = VETH_FEATURES; } /* -- cgit v0.10.2 From 7f51c58731dfb0ef88ff283851a4710cc3335788 Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Sat, 29 Dec 2012 16:37:33 +0000 Subject: team: add ethtool support This patch adds few ethtool operations to team driver. Signed-off-by: Flavio Leitner Acked-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 27a6ede..918a901 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #define DRV_NAME "team" @@ -1741,6 +1742,21 @@ static const struct net_device_ops team_netdev_ops = { .ndo_change_carrier = team_change_carrier, }; +/*********************** + * ethtool interface + ***********************/ + +static void team_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *drvinfo) +{ + strncpy(drvinfo->driver, DRV_NAME, 32); + strncpy(drvinfo->version, UTS_RELEASE, 32); +} + +static const struct ethtool_ops team_ethtool_ops = { + .get_drvinfo = team_ethtool_get_drvinfo, + .get_link = ethtool_op_get_link, +}; /*********************** * rt netlink interface @@ -1790,6 +1806,7 @@ static void team_setup(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &team_netdev_ops; + dev->ethtool_ops = &team_ethtool_ops; dev->destructor = team_destructor; dev->tx_queue_len = 0; dev->flags |= IFF_MULTICAST; -- cgit v0.10.2 From 1ab4434c64f8d4786e4a26299e0ebb138a0a6415 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:23 +0000 Subject: bnx2x: Support probing and removing of VF device To support probing and removing of a bnx2x virtual function the following were added: 1. add bnx2x_vfpf.h: defines the VF to PF channel 2. add bnx2x_sriov.h: header for bnx2x SR-IOV functionality 3. enumerate VF hw types (identify VFs) 4. if driving a VF, map VF bar 5. if driving a VF, allocate Vf to PF channel 6. refactor interrupt flows to include VF Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index e8d4db1..ff5da33 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -49,6 +49,12 @@ #include "bnx2x_dcb.h" #include "bnx2x_stats.h" +enum bnx2x_int_mode { + BNX2X_INT_MODE_MSIX, + BNX2X_INT_MODE_INTX, + BNX2X_INT_MODE_MSI +}; + /* error/debug prints */ #define DRV_MODULE_NAME "bnx2x" @@ -954,6 +960,9 @@ struct bnx2x_port { extern struct workqueue_struct *bnx2x_wq; #define BNX2X_MAX_NUM_OF_VFS 64 +#define BNX2X_VF_CID_WND 0 +#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) +#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) #define BNX2X_VF_ID_INVALID 0xFF /* @@ -1231,6 +1240,10 @@ struct bnx2x { (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) #define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) + /* vf pf channel mailbox contains request and response buffers */ + struct bnx2x_vf_mbx_msg *vf2pf_mbox; + dma_addr_t vf2pf_mbox_mapping; + struct net_device *dev; struct pci_dev *pdev; @@ -1318,8 +1331,6 @@ struct bnx2x { #define DISABLE_MSI_FLAG (1 << 7) #define TPA_ENABLE_FLAG (1 << 8) #define NO_MCP_FLAG (1 << 9) - -#define BP_NOMCP(bp) (bp->flags & NO_MCP_FLAG) #define GRO_ENABLE_FLAG (1 << 10) #define MF_FUNC_DIS (1 << 11) #define OWN_CNIC_IRQ (1 << 12) @@ -1330,6 +1341,11 @@ struct bnx2x { #define BC_SUPPORTS_FCOE_FEATURES (1 << 19) #define USING_SINGLE_MSIX_FLAG (1 << 20) #define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21) +#define IS_VF_FLAG (1 << 22) + +#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) +#define IS_VF(bp) ((bp)->flags & IS_VF_FLAG) +#define IS_PF(bp) (!((bp)->flags & IS_VF_FLAG)) #define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG) #define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG) @@ -1432,6 +1448,7 @@ struct bnx2x { u8 igu_sb_cnt; u8 min_msix_vec_cnt; + u32 igu_base_addr; dma_addr_t def_status_blk_mapping; struct bnx2x_slowpath *slowpath; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 01588b6..8687eb3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1439,12 +1439,15 @@ void bnx2x_free_irq(struct bnx2x *bp) int bnx2x_enable_msix(struct bnx2x *bp) { - int msix_vec = 0, i, rc, req_cnt; + int msix_vec = 0, i, rc; - bp->msix_table[msix_vec].entry = msix_vec; - BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n", - bp->msix_table[0].entry); - msix_vec++; + /* VFs don't have a default status block */ + if (IS_PF(bp)) { + bp->msix_table[msix_vec].entry = msix_vec; + BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n", + bp->msix_table[0].entry); + msix_vec++; + } /* Cnic requires an msix vector for itself */ if (CNIC_SUPPORT(bp)) { @@ -1462,9 +1465,10 @@ int bnx2x_enable_msix(struct bnx2x *bp) msix_vec++; } - req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp) + 1; + DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors\n", + msix_vec); - rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt); + rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], msix_vec); /* * reconfigure number of tx/rx queues according to available @@ -1472,7 +1476,7 @@ int bnx2x_enable_msix(struct bnx2x *bp) */ if (rc >= BNX2X_MIN_MSIX_VEC_CNT(bp)) { /* how less vectors we will have? */ - int diff = req_cnt - rc; + int diff = msix_vec - rc; BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc); @@ -3905,7 +3909,10 @@ int bnx2x_alloc_mem_bp(struct bnx2x *bp) * The biggest MSI-X table we might need is as a maximum number of fast * path IGU SBs plus default SB (for PF). */ - msix_table_size = bp->igu_sb_cnt + 1; + msix_table_size = bp->igu_sb_cnt; + if (IS_PF(bp)) + msix_table_size++; + BNX2X_DEV_INFO("msix_table_size %d\n", msix_table_size); /* fp array: RSS plus CNIC related L2 queues */ fp_array_size = BNX2X_MAX_RSS_COUNT(bp) + CNIC_SUPPORT(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 0991534..bca371e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -863,7 +863,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp) netif_napi_del(&bnx2x_fp(bp, i, napi)); } -void bnx2x_set_int_mode(struct bnx2x *bp); +int bnx2x_set_int_mode(struct bnx2x *bp); static inline void bnx2x_disable_msi(struct bnx2x *bp) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 940ef85..bb59004 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -59,6 +59,8 @@ #include "bnx2x_init.h" #include "bnx2x_init_ops.h" #include "bnx2x_cmn.h" +#include "bnx2x_vfpf.h" +#include "bnx2x_sriov.h" #include "bnx2x_dcb.h" #include "bnx2x_sp.h" @@ -133,39 +135,49 @@ enum bnx2x_board_type { BCM57711E, BCM57712, BCM57712_MF, + BCM57712_VF, BCM57800, BCM57800_MF, + BCM57800_VF, BCM57810, BCM57810_MF, - BCM57840_O, + BCM57810_VF, BCM57840_4_10, BCM57840_2_20, - BCM57840_MFO, BCM57840_MF, + BCM57840_VF, BCM57811, - BCM57811_MF + BCM57811_MF, + BCM57840_O, + BCM57840_MFO, + BCM57811_VF }; /* indexed by board_type, above */ static struct { char *name; } board_info[] = { - { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, - { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, - { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, - { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, - { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, - { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, - { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" }, - { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"}, - { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"}, - { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet"}, - { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function"}, + [BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, + [BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, + [BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, + [BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, + [BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, + [BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" }, + [BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, + [BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, + [BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" }, + [BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, + [BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, + [BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" }, + [BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" }, + [BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" }, + [BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }, + [BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" }, + [BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" }, + [BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, + [BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" } }; #ifndef PCI_DEVICE_ID_NX2_57710 @@ -7792,41 +7804,49 @@ int bnx2x_setup_leading(struct bnx2x *bp) * * In case of MSI-X it will also try to enable MSI-X. */ -void bnx2x_set_int_mode(struct bnx2x *bp) +int bnx2x_set_int_mode(struct bnx2x *bp) { + int rc = 0; + + if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) + return -EINVAL; + switch (int_mode) { - case INT_MODE_MSI: + case BNX2X_INT_MODE_MSIX: + /* attempt to enable msix */ + rc = bnx2x_enable_msix(bp); + + /* msix attained */ + if (!rc) + return 0; + + /* vfs use only msix */ + if (rc && IS_VF(bp)) + return rc; + + /* failed to enable multiple MSI-X */ + BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", + bp->num_queues, + 1 + bp->num_cnic_queues); + + /* falling through... */ + case BNX2X_INT_MODE_MSI: bnx2x_enable_msi(bp); + /* falling through... */ - case INT_MODE_INTx: + case BNX2X_INT_MODE_INTX: bp->num_ethernet_queues = 1; bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; BNX2X_DEV_INFO("set number of queues to 1\n"); break; default: - /* if we can't use MSI-X we only need one fp, - * so try to enable MSI-X with the requested number of fp's - * and fallback to MSI or legacy INTx with one fp - */ - if (bnx2x_enable_msix(bp) || - bp->flags & USING_SINGLE_MSIX_FLAG) { - /* failed to enable multiple MSI-X */ - BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", - bp->num_queues, - 1 + bp->num_cnic_queues); - - bp->num_queues = 1 + bp->num_cnic_queues; - - /* Try to enable MSI */ - if (!(bp->flags & USING_SINGLE_MSIX_FLAG) && - !(bp->flags & DISABLE_MSI_FLAG)) - bnx2x_enable_msi(bp); - } - break; + BNX2X_DEV_INFO("unknown value in int_mode module parameter\n"); + return -EINVAL; } + return 0; } -/* must be called prioir to any HW initializations */ +/* must be called prior to any HW initializations */ static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) { return L2_ILT_LINES(bp); @@ -11081,9 +11101,13 @@ static int bnx2x_init_bp(struct bnx2x *bp) INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); - rc = bnx2x_get_hwinfo(bp); - if (rc) - return rc; + if (IS_PF(bp)) { + rc = bnx2x_get_hwinfo(bp); + if (rc) + return rc; + } else { + random_ether_addr(bp->dev->dev_addr); + } bnx2x_set_modes_bitmap(bp); @@ -11096,7 +11120,7 @@ static int bnx2x_init_bp(struct bnx2x *bp) func = BP_FUNC(bp); /* need to reset chip if undi was active */ - if (!BP_NOMCP(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* init fw_seq */ bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & @@ -11133,6 +11157,8 @@ static int bnx2x_init_bp(struct bnx2x *bp) bp->mrrs = mrrs; bp->tx_ring_size = IS_MF_FCOE_AFEX(bp) ? 0 : MAX_TX_AVAIL; + if (IS_VF(bp)) + bp->rx_ring_size = MAX_RX_AVAIL; /* make sure that the numbers are in the right granularity */ bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; @@ -11161,12 +11187,18 @@ static int bnx2x_init_bp(struct bnx2x *bp) bp->cnic_base_cl_id = FP_SB_MAX_E2; /* multiple tx priority */ - if (CHIP_IS_E1x(bp)) + if (IS_VF(bp)) + bp->max_cos = 1; + else if (CHIP_IS_E1x(bp)) bp->max_cos = BNX2X_MULTI_TX_COS_E1X; - if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) + else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; - if (CHIP_IS_E3B0(bp)) + else if (CHIP_IS_E3B0(bp)) bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; + else + BNX2X_ERR("unknown chip %x revision %x\n", + CHIP_NUM(bp), CHIP_REV(bp)); + BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos); /* We need at least one default status block for slow-path events, * second status block for the L2 queue, and a third status block for @@ -11551,10 +11583,9 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp) return 0; } -static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, - unsigned long board_type) +static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, + struct net_device *dev, unsigned long board_type) { - struct bnx2x *bp; int rc; u32 pci_cfg_dword; bool chip_is_e1x = (board_type == BCM57710 || @@ -11562,11 +11593,9 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, board_type == BCM57711E); SET_NETDEV_DEV(dev, &pdev->dev); - bp = netdev_priv(dev); bp->dev = dev; bp->pdev = pdev; - bp->flags = 0; rc = pci_enable_device(pdev); if (rc) { @@ -11582,9 +11611,8 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, goto err_out_disable; } - if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { - dev_err(&bp->pdev->dev, "Cannot find second PCI device" - " base address, aborting\n"); + if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n"); rc = -ENODEV; goto err_out_disable; } @@ -11609,12 +11637,14 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, pci_save_state(pdev); } - bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (bp->pm_cap == 0) { - dev_err(&bp->pdev->dev, - "Cannot find power management capability, aborting\n"); - rc = -EIO; - goto err_out_release; + if (IS_PF(bp)) { + bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (bp->pm_cap == 0) { + dev_err(&bp->pdev->dev, + "Cannot find power management capability, aborting\n"); + rc = -EIO; + goto err_out_release; + } } if (!pci_is_pcie(pdev)) { @@ -11665,25 +11695,28 @@ static int bnx2x_init_dev(struct pci_dev *pdev, struct net_device *dev, * Clean the following indirect addresses for all functions since it * is not used by the driver. */ - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + if (IS_PF(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + + if (chip_is_e1x) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } - if (chip_is_e1x) { - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + /* Enable internal target-read (in case we are probed after PF + * FLR). Must be done prior to any BAR read access. Only for + * 57712 and up + */ + if (!chip_is_e1x) + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); } - /* - * Enable internal target-read (in case we are probed after PF FLR). - * Must be done prior to any BAR read access. Only for 57712 and up - */ - if (!chip_is_e1x) - REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); - dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &bnx2x_netdev_ops; @@ -11734,8 +11767,9 @@ err_out: static void bnx2x_get_pcie_width_speed(struct bnx2x *bp, int *width, int *speed) { - u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + u32 val = 0; + pci_read_config_dword(bp->pdev, PCICFG_LINK_CONTROL, &val); *width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT; /* return value of 1=2.5GHz 2=5GHz */ @@ -12012,10 +12046,10 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp) * */ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, - int cnic_cnt) + int cnic_cnt, bool is_vf) { - int pos; - u16 control; + int pos, index; + u16 control = 0; pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); @@ -12023,85 +12057,114 @@ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, * If MSI-X is not supported - return number of SBs needed to support * one fast path queue: one FP queue + SB for CNIC */ - if (!pos) + if (!pos) { + dev_info(&pdev->dev, "no msix capability found\n"); return 1 + cnic_cnt; + } + dev_info(&pdev->dev, "msix capability found\n"); /* * The value in the PCI configuration space is the index of the last * entry, namely one less than the actual size of the table, which is * exactly what we want to return from this function: number of all SBs * without the default SB. + * For VFs there is no default SB, then we return (index+1). */ pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &control); - return control & PCI_MSIX_FLAGS_QSIZE; -} -struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *); + index = control & PCI_MSIX_FLAGS_QSIZE; -static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct net_device *dev = NULL; - struct bnx2x *bp; - int pcie_width, pcie_speed; - int rc, max_non_def_sbs; - int rx_count, tx_count, rss_count, doorbell_size; - int cnic_cnt; - /* - * An estimated maximum supported CoS number according to the chip - * version. - * We will try to roughly estimate the maximum number of CoSes this chip - * may support in order to minimize the memory allocated for Tx - * netdev_queue's. This number will be accurately calculated during the - * initialization of bp->max_cos based on the chip versions AND chip - * revision in the bnx2x_init_bp(). - */ - u8 max_cos_est = 0; + return is_vf ? index + 1 : index; +} - switch (ent->driver_data) { +static int set_max_cos_est(int chip_id) +{ + switch (chip_id) { case BCM57710: case BCM57711: case BCM57711E: - max_cos_est = BNX2X_MULTI_TX_COS_E1X; - break; - + return BNX2X_MULTI_TX_COS_E1X; case BCM57712: case BCM57712_MF: - max_cos_est = BNX2X_MULTI_TX_COS_E2_E3A0; - break; - + case BCM57712_VF: + return BNX2X_MULTI_TX_COS_E2_E3A0; case BCM57800: case BCM57800_MF: + case BCM57800_VF: case BCM57810: case BCM57810_MF: - case BCM57840_O: case BCM57840_4_10: case BCM57840_2_20: + case BCM57840_O: case BCM57840_MFO: + case BCM57810_VF: case BCM57840_MF: + case BCM57840_VF: case BCM57811: case BCM57811_MF: - max_cos_est = BNX2X_MULTI_TX_COS_E3B0; - break; - + case BCM57811_VF: + return BNX2X_MULTI_TX_COS_E3B0; + return 1; default: - pr_err("Unknown board_type (%ld), aborting\n", - ent->driver_data); + pr_err("Unknown board_type (%d), aborting\n", chip_id); return -ENODEV; } +} - cnic_cnt = 1; - max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt); +static int set_is_vf(int chip_id) +{ + switch (chip_id) { + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: + return true; + default: + return false; + } +} - WARN_ON(!max_non_def_sbs); +struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev); + +static int bnx2x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct bnx2x *bp; + int pcie_width, pcie_speed; + int rc, max_non_def_sbs; + int rx_count, tx_count, rss_count, doorbell_size; + int max_cos_est; + bool is_vf; + int cnic_cnt; + + /* An estimated maximum supported CoS number according to the chip + * version. + * We will try to roughly estimate the maximum number of CoSes this chip + * may support in order to minimize the memory allocated for Tx + * netdev_queue's. This number will be accurately calculated during the + * initialization of bp->max_cos based on the chip versions AND chip + * revision in the bnx2x_init_bp(). + */ + max_cos_est = set_max_cos_est(ent->driver_data); + if (max_cos_est < 0) + return max_cos_est; + is_vf = set_is_vf(ent->driver_data); + cnic_cnt = is_vf ? 0 : 1; + + max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt, is_vf); /* Maximum number of RSS queues: one IGU SB goes to CNIC */ - rss_count = max_non_def_sbs - cnic_cnt; + rss_count = is_vf ? 1 : max_non_def_sbs - cnic_cnt; + + if (rss_count < 1) + return -EINVAL; /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ rx_count = rss_count + cnic_cnt; - /* - * Maximum number of netdev Tx queues: + /* Maximum number of netdev Tx queues: * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 */ tx_count = rss_count * max_cos_est + cnic_cnt; @@ -12113,22 +12176,28 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) bp = netdev_priv(dev); + bp->flags = 0; + if (is_vf) + bp->flags |= IS_VF_FLAG; + bp->igu_sb_cnt = max_non_def_sbs; + bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM; bp->msg_enable = debug; bp->cnic_support = cnic_cnt; bp->cnic_probe = bnx2x_cnic_probe; pci_set_drvdata(pdev, dev); - rc = bnx2x_init_dev(pdev, dev, ent->driver_data); + rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data); if (rc < 0) { free_netdev(dev); return rc; } + BNX2X_DEV_INFO("This is a %s function\n", + IS_PF(bp) ? "physical" : "virtual"); BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); - BNX2X_DEV_INFO("max_non_def_sbs %d\n", max_non_def_sbs); - + BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", tx_count, rx_count); @@ -12136,19 +12205,28 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto init_one_exit; - /* - * Map doorbels here as we need the real value of bp->max_cos which - * is initialized in bnx2x_init_bp(). + /* Map doorbells here as we need the real value of bp->max_cos which + * is initialized in bnx2x_init_bp() to determine the number of + * l2 connections. */ - doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); - if (doorbell_size > pci_resource_len(pdev, 2)) { - dev_err(&bp->pdev->dev, - "Cannot map doorbells, bar size too small, aborting\n"); - rc = -ENOMEM; - goto init_one_exit; + if (IS_VF(bp)) { + /* vf doorbells are embedded within the regview */ + bp->doorbells = bp->regview + PXP_VF_ADDR_DB_START; + + /* allocate vf2pf mailbox for vf to pf channel */ + BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + } else { + doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); + if (doorbell_size > pci_resource_len(pdev, 2)) { + dev_err(&bp->pdev->dev, + "Cannot map doorbells, bar size too small, aborting\n"); + rc = -ENOMEM; + goto init_one_exit; + } + bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), + doorbell_size); } - bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), - doorbell_size); if (!bp->doorbells) { dev_err(&bp->pdev->dev, "Cannot map doorbell space, aborting\n"); @@ -12158,6 +12236,7 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* calc qm_cid_count */ bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); + BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); /* disable FCOE L2 queue for E1x*/ if (CHIP_IS_E1x(bp)) @@ -12179,13 +12258,19 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Configure interrupt mode: try to enable MSI-X/MSI if * needed. */ - bnx2x_set_int_mode(bp); + rc = bnx2x_set_int_mode(bp); + if (rc) { + dev_err(&pdev->dev, "Cannot set interrupts\n"); + goto init_one_exit; + } + /* register the net device */ rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); goto init_one_exit; } + BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name); if (!NO_FCOE(bp)) { @@ -12196,6 +12281,8 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed); + BNX2X_DEV_INFO("got pcie width %d and speed %d\n", + pcie_width, pcie_speed); BNX2X_DEV_INFO( "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", @@ -12209,11 +12296,16 @@ static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; +alloc_mem_err: + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + rc = -ENOMEM; + init_one_exit: if (bp->regview) iounmap(bp->regview); - if (bp->doorbells) + if (IS_PF(bp) && bp->doorbells) iounmap(bp->doorbells); free_netdev(dev); @@ -12253,13 +12345,15 @@ static void bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); /* Power on: we can't let PCI layer write to us while we are in D3 */ - bnx2x_set_power_state(bp, PCI_D0); + if (IS_PF(bp)) + bnx2x_set_power_state(bp, PCI_D0); /* Disable MSI/MSI-X */ bnx2x_disable_msi(bp); /* Power off */ - bnx2x_set_power_state(bp, PCI_D3hot); + if (IS_PF(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); /* Make sure RESET task is not scheduled before continuing */ cancel_delayed_work_sync(&bp->sp_rtnl_task); @@ -12267,11 +12361,15 @@ static void bnx2x_remove_one(struct pci_dev *pdev) if (bp->regview) iounmap(bp->regview); - if (bp->doorbells) - iounmap(bp->doorbells); - - bnx2x_release_firmware(bp); + /* for vf doorbells are part of the regview and were unmapped along with + * it. FW is only loaded by PF. + */ + if (IS_PF(bp)) { + if (bp->doorbells) + iounmap(bp->doorbells); + bnx2x_release_firmware(bp); + } bnx2x_free_mem_bp(bp); free_netdev(dev); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index bc2f65b..463a984 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6554,6 +6554,15 @@ (7L< + * Written by: Shmulik Ravid + * Ariel Elior + */ +#ifndef BNX2X_SRIOV_H +#define BNX2X_SRIOV_H + +struct bnx2x_vf_mbx_msg { + union vfpf_tlvs req; + union pfvf_tlvs resp; +}; + +#endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h new file mode 100644 index 0000000..bb37675 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -0,0 +1,37 @@ +/* bnx2x_vfpf.h: Broadcom Everest network driver. + * + * Copyright (c) 2011-2012 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein + * Written by: Ariel Elior + */ +#ifndef VF_PF_IF_H +#define VF_PF_IF_H + +/* HW VF-PF channel definitions + * A.K.A VF-PF mailbox + */ +#define TLV_BUFFER_SIZE 1024 + +struct tlv_buffer_size { + u8 tlv_buffer[TLV_BUFFER_SIZE]; +}; + +union vfpf_tlvs { + struct tlv_buffer_size tlv_buf_size; +}; + +union pfvf_tlvs { + struct tlv_buffer_size tlv_buf_size; +}; +#endif /* VF_PF_IF_H */ -- cgit v0.10.2 From be1f1ffaf9acf06f556a00e2d1548c70af2b6dea Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:24 +0000 Subject: bnx2x: VF <-> PF channel 'acquire' at vf probe Add the 'acquire' request to VF <-> PF channel and use it at VF probe. In the acquire request the VF driver lists the resources it would like to have. In the response the PF either ratifies the request, or denies it and supplies the maximum values supported. The VF may then attempt another acquire request. This patch adds the bnx2x_vfpf.c file which contains the implementation of the VF to PF hardware channel. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile index 48fbdd4..d862ea6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/Makefile +++ b/drivers/net/ethernet/broadcom/bnx2x/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_BNX2X) += bnx2x.o -bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o +bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_vfpf.o diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index ff5da33..eebc01d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -48,6 +48,7 @@ #include "bnx2x_sp.h" #include "bnx2x_dcb.h" #include "bnx2x_stats.h" +#include "bnx2x_vfpf.h" enum bnx2x_int_mode { BNX2X_INT_MODE_MSIX, @@ -1244,6 +1245,9 @@ struct bnx2x { struct bnx2x_vf_mbx_msg *vf2pf_mbox; dma_addr_t vf2pf_mbox_mapping; + /* we set aside a copy of the acquire response */ + struct pfvf_acquire_resp_tlv acquire_resp; + struct net_device *dev; struct pci_dev *pdev; @@ -2207,6 +2211,15 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, #define BNX2X_VPD_LEN 128 #define VENDOR_ID_LEN 4 +#define VF_ACQUIRE_THRESH 3 +#define VF_ACQUIRE_MAC_FILTERS 1 +#define VF_ACQUIRE_MC_FILTERS 10 + +#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \ + (!((me_reg) & ME_REG_VF_ERR))) +int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id); +int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping); +int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); /* Congestion management fairness mode */ #define CMNG_FNS_NONE 0 #define CMNG_FNS_MINMAX 1 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index bb59004..e53f851 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12234,6 +12234,12 @@ static int bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } + if (IS_VF(bp)) { + rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count); + if (rc) + goto init_one_exit; + } + /* calc qm_cid_count */ bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); @@ -13157,4 +13163,183 @@ struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) return cp; } +int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping) +{ + struct cstorm_vf_zone_data __iomem *zone_data = + REG_ADDR(bp, PXP_VF_ADDR_CSDM_GLOBAL_START); + int tout = 600, interval = 100; /* wait for 60 seconds */ + + if (*done) { + BNX2X_ERR("done was non zero before message to pf was sent\n"); + WARN_ON(true); + return -EINVAL; + } + + /* Write message address */ + writel(U64_LO(msg_mapping), + &zone_data->non_trigger.vf_pf_channel.msg_addr_lo); + writel(U64_HI(msg_mapping), + &zone_data->non_trigger.vf_pf_channel.msg_addr_hi); + + /* make sure the address is written before FW accesses it */ + wmb(); + + /* Trigger the PF FW */ + writeb(1, &zone_data->trigger.vf_pf_channel.addr_valid); + + /* Wait for PF to complete */ + while ((tout >= 0) && (!*done)) { + msleep(interval); + tout -= 1; + + /* progress indicator - HV can take its own sweet time in + * answering VFs... + */ + DP_CONT(BNX2X_MSG_IOV, "."); + } + + if (!*done) { + BNX2X_ERR("PF response has timed out\n"); + return -EAGAIN; + } + DP(BNX2X_MSG_SP, "Got a response from PF\n"); + return 0; +} + +int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id) +{ + u32 me_reg; + int tout = 10, interval = 100; /* Wait for 1 sec */ + + do { + /* pxp traps vf read of doorbells and returns me reg value */ + me_reg = readl(bp->doorbells); + if (GOOD_ME_REG(me_reg)) + break; + + msleep(interval); + + BNX2X_ERR("Invalid ME register value: 0x%08x\n. Is pf driver up?", + me_reg); + } while (tout-- > 0); + + if (!GOOD_ME_REG(me_reg)) { + BNX2X_ERR("Invalid ME register value: 0x%08x\n", me_reg); + return -EINVAL; + } + + BNX2X_ERR("valid ME register value: 0x%08x\n", me_reg); + + *vf_id = (me_reg & ME_REG_VF_NUM_MASK) >> ME_REG_VF_NUM_SHIFT; + return 0; +} + +int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) +{ + int rc = 0, attempts = 0; + struct vfpf_acquire_tlv *req = &bp->vf2pf_mbox->req.acquire; + struct pfvf_acquire_resp_tlv *resp = &bp->vf2pf_mbox->resp.acquire_resp; + u32 vf_id; + bool resources_acquired = false; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_ACQUIRE, sizeof(*req)); + + if (bnx2x_get_vf_id(bp, &vf_id)) + return -EAGAIN; + + req->vfdev_info.vf_id = vf_id; + req->vfdev_info.vf_os = 0; + + req->resc_request.num_rxqs = rx_count; + req->resc_request.num_txqs = tx_count; + req->resc_request.num_sbs = bp->igu_sb_cnt; + req->resc_request.num_mac_filters = VF_ACQUIRE_MAC_FILTERS; + req->resc_request.num_mc_filters = VF_ACQUIRE_MC_FILTERS; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + while (!resources_acquired) { + DP(BNX2X_MSG_SP, "attempting to acquire resources\n"); + + /* send acquire request */ + rc = bnx2x_send_msg2pf(bp, + &resp->hdr.status, + bp->vf2pf_mbox_mapping); + + /* PF timeout */ + if (rc) + return rc; + + /* copy acquire response from buffer to bp */ + memcpy(&bp->acquire_resp, resp, sizeof(bp->acquire_resp)); + + attempts++; + + /* test whether the PF accepted our request. If not, humble the + * the request and try again. + */ + if (bp->acquire_resp.hdr.status == PFVF_STATUS_SUCCESS) { + DP(BNX2X_MSG_SP, "resources acquired\n"); + resources_acquired = true; + } else if (bp->acquire_resp.hdr.status == + PFVF_STATUS_NO_RESOURCE && + attempts < VF_ACQUIRE_THRESH) { + DP(BNX2X_MSG_SP, + "PF unwilling to fulfill resource request. Try PF recommended amount\n"); + + /* humble our request */ + req->resc_request.num_txqs = + bp->acquire_resp.resc.num_txqs; + req->resc_request.num_rxqs = + bp->acquire_resp.resc.num_rxqs; + req->resc_request.num_sbs = + bp->acquire_resp.resc.num_sbs; + req->resc_request.num_mac_filters = + bp->acquire_resp.resc.num_mac_filters; + req->resc_request.num_vlan_filters = + bp->acquire_resp.resc.num_vlan_filters; + req->resc_request.num_mc_filters = + bp->acquire_resp.resc.num_mc_filters; + + /* Clear response buffer */ + memset(&bp->vf2pf_mbox->resp, 0, + sizeof(union pfvf_tlvs)); + } else { + /* PF reports error */ + BNX2X_ERR("Failed to get the requested amount of resources: %d. Breaking...\n", + bp->acquire_resp.hdr.status); + return -EAGAIN; + } + } + + /* get HW info */ + bp->common.chip_id |= (bp->acquire_resp.pfdev_info.chip_num & 0xffff); + bp->link_params.chip_id = bp->common.chip_id; + bp->db_size = bp->acquire_resp.pfdev_info.db_size; + bp->common.int_block = INT_BLOCK_IGU; + bp->common.chip_port_mode = CHIP_2_PORT_MODE; + bp->igu_dsb_id = -1; + bp->mf_ov = 0; + bp->mf_mode = 0; + bp->common.flash_size = 0; + bp->flags |= + NO_WOL_FLAG | NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG | NO_FCOE_FLAG; + bp->igu_sb_cnt = 1; + bp->igu_base_sb = bp->acquire_resp.resc.hw_sbs[0].hw_sb_id; + strlcpy(bp->fw_ver, bp->acquire_resp.pfdev_info.fw_ver, + sizeof(bp->fw_ver)); + + if (is_valid_ether_addr(bp->acquire_resp.resc.current_mac_addr)) + memcpy(bp->dev->dev_addr, + bp->acquire_resp.resc.current_mac_addr, + ETH_ALEN); + + return 0; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 463a984..c302de4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6558,6 +6558,12 @@ #define PXP_VF_ADDR_IGU_SIZE 0x3000 #define PXP_VF_ADDR_IGU_END\ ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1) + +#define PXP_VF_ADDR_CSDM_GLOBAL_START 0x7600 +#define PXP_VF_ADDR_CSDM_GLOBAL_SIZE (PXP_ADDR_REG_SIZE) +#define PXP_VF_ADDR_CSDM_GLOBAL_END\ + ((PXP_VF_ADDR_CSDM_GLOBAL_START) + (PXP_VF_ADDR_CSDM_GLOBAL_SIZE) - 1) + #define PXP_VF_ADDR_DB_START 0x7c00 #define PXP_VF_ADDR_DB_SIZE 0x200 #define PXP_VF_ADDR_DB_END\ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 1b14745..6d0df33 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -24,4 +24,9 @@ struct bnx2x_vf_mbx_msg { union pfvf_tlvs resp; }; +void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, + u16 length); +void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, + u16 type, u16 length); +void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list); #endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c new file mode 100644 index 0000000..55dd6a9 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -0,0 +1,80 @@ +/* bnx2x_vfpf.c: Broadcom Everest network driver. + * + * Copyright 2009-2012 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein + * Written by: Shmulik Ravid + * Ariel Elior + */ + +#include "bnx2x.h" +#include "bnx2x_sriov.h" + +/* place a given tlv on the tlv buffer at a given offset */ +void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, + u16 length) +{ + struct channel_tlv *tl = + (struct channel_tlv *)(tlvs_list + offset); + + tl->type = type; + tl->length = length; +} + +/* Clear the mailbox and init the header of the first tlv */ +void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, + u16 type, u16 length) +{ + DP(BNX2X_MSG_IOV, "preparing to send %d tlv over vf pf channel\n", + type); + + /* Clear mailbox */ + memset(bp->vf2pf_mbox, 0, sizeof(struct bnx2x_vf_mbx_msg)); + + /* init type and length */ + bnx2x_add_tlv(bp, &first_tlv->tl, 0, type, length); + + /* init first tlv header */ + first_tlv->resp_msg_offset = sizeof(bp->vf2pf_mbox->req); +} + +/* list the types and lengths of the tlvs on the buffer */ +void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list) +{ + int i = 1; + struct channel_tlv *tlv = (struct channel_tlv *)tlvs_list; + + while (tlv->type != CHANNEL_TLV_LIST_END) { + /* output tlv */ + DP(BNX2X_MSG_IOV, "TLV number %d: type %d, length %d\n", i, + tlv->type, tlv->length); + + /* advance to next tlv */ + tlvs_list += tlv->length; + + /* cast general tlv list pointer to channel tlv header*/ + tlv = (struct channel_tlv *)tlvs_list; + + i++; + + /* break condition for this loop */ + if (i > MAX_TLVS_IN_LIST) { + WARN(true, "corrupt tlvs"); + return; + } + } + + /* output last tlv */ + DP(BNX2X_MSG_IOV, "TLV number %d: type %d, length %d\n", i, + tlv->type, tlv->length); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index bb37675..728491f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -18,20 +18,137 @@ #ifndef VF_PF_IF_H #define VF_PF_IF_H +/* Common definitions for all HVs */ +struct vf_pf_resc_request { + u8 num_rxqs; + u8 num_txqs; + u8 num_sbs; + u8 num_mac_filters; + u8 num_vlan_filters; + u8 num_mc_filters; /* No limit so superfluous */ +}; + +struct hw_sb_info { + u8 hw_sb_id; /* aka absolute igu id, used to ack the sb */ + u8 sb_qid; /* used to update DHC for sb */ +}; + /* HW VF-PF channel definitions * A.K.A VF-PF mailbox */ #define TLV_BUFFER_SIZE 1024 +enum { + PFVF_STATUS_WAITING = 0, + PFVF_STATUS_SUCCESS, + PFVF_STATUS_FAILURE, + PFVF_STATUS_NOT_SUPPORTED, + PFVF_STATUS_NO_RESOURCE +}; + +/* vf pf channel tlvs */ +/* general tlv header (used for both vf->pf request and pf->vf response) */ +struct channel_tlv { + u16 type; + u16 length; +}; + +/* header of first vf->pf tlv carries the offset used to calculate response + * buffer address + */ +struct vfpf_first_tlv { + struct channel_tlv tl; + u32 resp_msg_offset; +}; + +/* header of pf->vf tlvs, carries the status of handling the request */ +struct pfvf_tlv { + struct channel_tlv tl; + u8 status; + u8 padding[3]; +}; + +/* used to terminate and pad a tlv list */ +struct channel_list_end_tlv { + struct channel_tlv tl; + u8 padding[4]; +}; + +/* Acquire */ +struct vfpf_acquire_tlv { + struct vfpf_first_tlv first_tlv; + + struct vf_pf_vfdev_info { + /* the following fields are for debug purposes */ + u8 vf_id; /* ME register value */ + u8 vf_os; /* e.g. Linux, W2K8 */ + u8 padding[2]; + } vfdev_info; + + struct vf_pf_resc_request resc_request; + + aligned_u64 bulletin_addr; +}; + +/* acquire response tlv - carries the allocated resources */ +struct pfvf_acquire_resp_tlv { + struct pfvf_tlv hdr; + struct pf_vf_pfdev_info { + u32 chip_num; + u32 pf_cap; +#define PFVF_CAP_RSS 0x00000001 +#define PFVF_CAP_DHC 0x00000002 +#define PFVF_CAP_TPA 0x00000004 + char fw_ver[32]; + u16 db_size; + u8 indices_per_sb; + u8 padding; + } pfdev_info; + struct pf_vf_resc { + /* in case of status NO_RESOURCE in message hdr, pf will fill + * this struct with suggested amount of resources for next + * acquire request + */ +#define PFVF_MAX_QUEUES_PER_VF 16 +#define PFVF_MAX_SBS_PER_VF 16 + struct hw_sb_info hw_sbs[PFVF_MAX_SBS_PER_VF]; + u8 hw_qid[PFVF_MAX_QUEUES_PER_VF]; + u8 num_rxqs; + u8 num_txqs; + u8 num_sbs; + u8 num_mac_filters; + u8 num_vlan_filters; + u8 num_mc_filters; + u8 permanent_mac_addr[ETH_ALEN]; + u8 current_mac_addr[ETH_ALEN]; + u8 padding[2]; + } resc; +}; + struct tlv_buffer_size { u8 tlv_buffer[TLV_BUFFER_SIZE]; }; union vfpf_tlvs { + struct vfpf_first_tlv first_tlv; + struct vfpf_acquire_tlv acquire; + struct channel_list_end_tlv list_end; struct tlv_buffer_size tlv_buf_size; }; union pfvf_tlvs { + struct pfvf_acquire_resp_tlv acquire_resp; + struct channel_list_end_tlv list_end; struct tlv_buffer_size tlv_buf_size; }; + +#define MAX_TLVS_IN_LIST 50 + +enum channel_tlvs { + CHANNEL_TLV_NONE, + CHANNEL_TLV_ACQUIRE, + CHANNEL_TLV_LIST_END, + CHANNEL_TLV_MAX +}; + #endif /* VF_PF_IF_H */ -- cgit v0.10.2 From 4513f92576856c552212fb9608aca56b88022454 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:25 +0000 Subject: bnx2x: Add to VF <-> PF channel the release request VF driver uses this request when removed. The PF driver reclaims all resources allocated for that VF at this time. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index eebc01d..4dc754b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2220,6 +2220,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id); int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping); int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); +int bnx2x_vfpf_release(struct bnx2x *bp); /* Congestion management fairness mode */ #define CMNG_FNS_NONE 0 #define CMNG_FNS_MINMAX 1 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e53f851..3dd5b26 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12363,6 +12363,9 @@ static void bnx2x_remove_one(struct pci_dev *pdev) /* Make sure RESET task is not scheduled before continuing */ cancel_delayed_work_sync(&bp->sp_rtnl_task); + /* send message via vfpf channel to release the resources of this vf */ + if (IS_VF(bp)) + bnx2x_vfpf_release(bp); if (bp->regview) iounmap(bp->regview); @@ -13343,3 +13346,43 @@ int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) return 0; } + +int bnx2x_vfpf_release(struct bnx2x *bp) +{ + struct vfpf_release_tlv *req = &bp->vf2pf_mbox->req.release; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + u32 rc = 0, vf_id; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_RELEASE, sizeof(*req)); + + if (bnx2x_get_vf_id(bp, &vf_id)) + return -EAGAIN; + + req->vf_id = vf_id; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send release request */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) + /* PF timeout */ + return rc; + if (resp->hdr.status == PFVF_STATUS_SUCCESS) { + /* PF released us */ + DP(BNX2X_MSG_SP, "vf released\n"); + } else { + /* PF reports error */ + BNX2X_ERR("PF failed our release request - are we out of sync? response status: %d\n", + resp->hdr.status); + return -EAGAIN; + } + + return 0; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 728491f..561c656 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -68,6 +68,11 @@ struct pfvf_tlv { u8 padding[3]; }; +/* response tlv used for most tlvs */ +struct pfvf_general_resp_tlv { + struct pfvf_tlv hdr; +}; + /* used to terminate and pad a tlv list */ struct channel_list_end_tlv { struct channel_tlv tl; @@ -125,6 +130,13 @@ struct pfvf_acquire_resp_tlv { } resc; }; +/* release the VF's acquired resources */ +struct vfpf_release_tlv { + struct vfpf_first_tlv first_tlv; + u16 vf_id; + u8 padding[2]; +}; + struct tlv_buffer_size { u8 tlv_buffer[TLV_BUFFER_SIZE]; }; @@ -132,11 +144,13 @@ struct tlv_buffer_size { union vfpf_tlvs { struct vfpf_first_tlv first_tlv; struct vfpf_acquire_tlv acquire; + struct vfpf_release_tlv release; struct channel_list_end_tlv list_end; struct tlv_buffer_size tlv_buf_size; }; union pfvf_tlvs { + struct pfvf_general_resp_tlv general_resp; struct pfvf_acquire_resp_tlv acquire_resp; struct channel_list_end_tlv list_end; struct tlv_buffer_size tlv_buf_size; @@ -147,6 +161,7 @@ union pfvf_tlvs { enum channel_tlvs { CHANNEL_TLV_NONE, CHANNEL_TLV_ACQUIRE, + CHANNEL_TLV_RELEASE, CHANNEL_TLV_LIST_END, CHANNEL_TLV_MAX }; -- cgit v0.10.2 From ad5afc89365e981cffafc241a4c46f56ca943370 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:26 +0000 Subject: bnx2x: Separate VF and PF logic Generally, the VF driver cannot access the chip, except by the narrow window its BAR allows. Care had to be taken so the VF driver will not reach code which accesses the chip elsewhere. Refactor the nic_load flow into parts so it would be easier to separate the VF-only logic from the PF-only logic. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 4dc754b..634eb30 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2221,6 +2221,7 @@ int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id); int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping); int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); int bnx2x_vfpf_release(struct bnx2x *bp); +int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code); /* Congestion management fairness mode */ #define CMNG_FNS_NONE 0 #define CMNG_FNS_MINMAX 1 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 8687eb3..646bfd1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1064,7 +1064,7 @@ void __bnx2x_link_report(struct bnx2x *bp) struct bnx2x_link_report_data cur_data; /* reread mf_cfg */ - if (!CHIP_IS_E1(bp)) + if (IS_PF(bp) && !CHIP_IS_E1(bp)) bnx2x_read_mf_cfg(bp); /* Read the current link report info */ @@ -1406,10 +1406,14 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs) if (nvecs == offset) return; - free_irq(bp->msix_table[offset].vector, bp->dev); - DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", - bp->msix_table[offset].vector); - offset++; + + /* VFs don't have a default SB */ + if (IS_PF(bp)) { + free_irq(bp->msix_table[offset].vector, bp->dev); + DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", + bp->msix_table[offset].vector); + offset++; + } if (CNIC_SUPPORT(bp)) { if (nvecs == offset) @@ -1430,11 +1434,17 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs) void bnx2x_free_irq(struct bnx2x *bp) { if (bp->flags & USING_MSIX_FLAG && - !(bp->flags & USING_SINGLE_MSIX_FLAG)) - bnx2x_free_msix_irqs(bp, BNX2X_NUM_ETH_QUEUES(bp) + - CNIC_SUPPORT(bp) + 1); - else + !(bp->flags & USING_SINGLE_MSIX_FLAG)) { + int nvecs = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp); + + /* vfs don't have a default status block */ + if (IS_PF(bp)) + nvecs++; + + bnx2x_free_msix_irqs(bp, nvecs); + } else { free_irq(bp->dev->irq, bp->dev); + } } int bnx2x_enable_msix(struct bnx2x *bp) @@ -1530,12 +1540,15 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) { int i, rc, offset = 0; - rc = request_irq(bp->msix_table[offset++].vector, - bnx2x_msix_sp_int, 0, - bp->dev->name, bp->dev); - if (rc) { - BNX2X_ERR("request sp irq failed\n"); - return -EBUSY; + /* no default status block for vf */ + if (IS_PF(bp)) { + rc = request_irq(bp->msix_table[offset++].vector, + bnx2x_msix_sp_int, 0, + bp->dev->name, bp->dev); + if (rc) { + BNX2X_ERR("request sp irq failed\n"); + return -EBUSY; + } } if (CNIC_SUPPORT(bp)) @@ -1559,12 +1572,20 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) } i = BNX2X_NUM_ETH_QUEUES(bp); - offset = 1 + CNIC_SUPPORT(bp); - netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n", - bp->msix_table[0].vector, - 0, bp->msix_table[offset].vector, - i - 1, bp->msix_table[offset + i - 1].vector); - + if (IS_PF(bp)) { + offset = 1 + CNIC_SUPPORT(bp); + netdev_info(bp->dev, + "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n", + bp->msix_table[0].vector, + 0, bp->msix_table[offset].vector, + i - 1, bp->msix_table[offset + i - 1].vector); + } else { + offset = CNIC_SUPPORT(bp); + netdev_info(bp->dev, + "using MSI-X IRQs: fp[%d] %d ... fp[%d] %d\n", + 0, bp->msix_table[offset].vector, + i - 1, bp->msix_table[offset + i - 1].vector); + } return 0; } @@ -1972,27 +1993,204 @@ static void bnx2x_squeeze_objects(struct bnx2x *bp) } while (0) #endif /*BNX2X_STOP_ON_ERROR*/ -bool bnx2x_test_firmware_version(struct bnx2x *bp, bool is_err) +static void bnx2x_free_fw_stats_mem(struct bnx2x *bp) +{ + BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + return; +} + +static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) { - /* build FW version dword */ - u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) + - (BCM_5710_FW_MINOR_VERSION << 8) + - (BCM_5710_FW_REVISION_VERSION << 16) + - (BCM_5710_FW_ENGINEERING_VERSION << 24); + int num_groups; + int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1; - /* read loaded FW from chip */ - u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); + /* number of queues for statistics is number of eth queues + FCoE */ + u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe_stats; - DP(NETIF_MSG_IFUP, "loaded fw %x, my fw %x\n", loaded_fw, my_fw); + /* Total number of FW statistics requests = + * 1 for port stats + 1 for PF stats + potential 2 for FCoE (fcoe proper + * and fcoe l2 queue) stats + num of queues (which includes another 1 + * for fcoe l2 queue if applicable) + */ + bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats; - if (loaded_fw != my_fw) { - if (is_err) - BNX2X_ERR("bnx2x with FW %x was already loaded, which mismatches my %x FW. aborting\n", + /* Request is built from stats_query_header and an array of + * stats_query_cmd_group each of which contains + * STATS_QUERY_CMD_COUNT rules. The real number or requests is + * configured in the stats_query_header. + */ + num_groups = + (((bp->fw_stats_num) / STATS_QUERY_CMD_COUNT) + + (((bp->fw_stats_num) % STATS_QUERY_CMD_COUNT) ? + 1 : 0)); + + DP(BNX2X_MSG_SP, "stats fw_stats_num %d, num_groups %d\n", + bp->fw_stats_num, num_groups); + bp->fw_stats_req_sz = sizeof(struct stats_query_header) + + num_groups * sizeof(struct stats_query_cmd_group); + + /* Data for statistics requests + stats_counter + * stats_counter holds per-STORM counters that are incremented + * when STORM has finished with the current request. + * memory for FCoE offloaded statistics are counted anyway, + * even if they will not be sent. + * VF stats are not accounted for here as the data of VF stats is stored + * in memory allocated by the VF, not here. + */ + bp->fw_stats_data_sz = sizeof(struct per_port_stats) + + sizeof(struct per_pf_stats) + + sizeof(struct fcoe_statistics_params) + + sizeof(struct per_queue_stats) * num_queue_stats + + sizeof(struct stats_counter); + + BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + + /* Set shortcuts */ + bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats; + bp->fw_stats_req_mapping = bp->fw_stats_mapping; + bp->fw_stats_data = (struct bnx2x_fw_stats_data *) + ((u8 *)bp->fw_stats + bp->fw_stats_req_sz); + bp->fw_stats_data_mapping = bp->fw_stats_mapping + + bp->fw_stats_req_sz; + + DP(BNX2X_MSG_SP, "statistics request base address set to %x %x", + U64_HI(bp->fw_stats_req_mapping), + U64_LO(bp->fw_stats_req_mapping)); + DP(BNX2X_MSG_SP, "statistics data base address set to %x %x", + U64_HI(bp->fw_stats_data_mapping), + U64_LO(bp->fw_stats_data_mapping)); + return 0; + +alloc_mem_err: + bnx2x_free_fw_stats_mem(bp); + BNX2X_ERR("Can't allocate FW stats memory\n"); + return -ENOMEM; +} + +/* send load request to mcp and analyze response */ +static int bnx2x_nic_load_request(struct bnx2x *bp, u32 *load_code) +{ + /* init fw_seq */ + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + + /* Get current FW pulse sequence */ + bp->fw_drv_pulse_wr_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) & + DRV_PULSE_SEQ_MASK); + BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq); + + /* load request */ + (*load_code) = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, + DRV_MSG_CODE_LOAD_REQ_WITH_LFA); + + /* if mcp fails to respond we must abort */ + if (!(*load_code)) { + BNX2X_ERR("MCP response failure, aborting\n"); + return -EBUSY; + } + + /* If mcp refused (e.g. other port is in diagnostic mode) we + * must abort + */ + if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) { + BNX2X_ERR("MCP refused load request, aborting\n"); + return -EBUSY; + } + return 0; +} + +/* check whether another PF has already loaded FW to chip. In + * virtualized environments a pf from another VM may have already + * initialized the device including loading FW + */ +int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code) +{ + /* is another pf loaded on this engine? */ + if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP && + load_code != FW_MSG_CODE_DRV_LOAD_COMMON) { + /* build my FW version dword */ + u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) + + (BCM_5710_FW_MINOR_VERSION << 8) + + (BCM_5710_FW_REVISION_VERSION << 16) + + (BCM_5710_FW_ENGINEERING_VERSION << 24); + + /* read loaded FW from chip */ + u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); + + DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n", + loaded_fw, my_fw); + + /* abort nic load if version mismatch */ + if (my_fw != loaded_fw) { + BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. aborting\n", loaded_fw, my_fw); - return false; + return -EBUSY; + } + } + return 0; +} + +/* returns the "mcp load_code" according to global load_count array */ +static int bnx2x_nic_load_no_mcp(struct bnx2x *bp, int port) +{ + int path = BP_PATH(bp); + + DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n", + path, load_count[path][0], load_count[path][1], + load_count[path][2]); + load_count[path][0]++; + load_count[path][1 + port]++; + DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n", + path, load_count[path][0], load_count[path][1], + load_count[path][2]); + if (load_count[path][0] == 1) + return FW_MSG_CODE_DRV_LOAD_COMMON; + else if (load_count[path][1 + port] == 1) + return FW_MSG_CODE_DRV_LOAD_PORT; + else + return FW_MSG_CODE_DRV_LOAD_FUNCTION; +} + +/* mark PMF if applicable */ +static void bnx2x_nic_load_pmf(struct bnx2x *bp, u32 load_code) +{ + if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) || + (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) { + bp->port.pmf = 1; + /* We need the barrier to ensure the ordering between the + * writing to bp->port.pmf here and reading it from the + * bnx2x_periodic_task(). + */ + smp_mb(); + } else { + bp->port.pmf = 0; } - return true; + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); +} + +static void bnx2x_nic_load_afex_dcc(struct bnx2x *bp, int load_code) +{ + if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) && + (bp->common.shmem2_base)) { + if (SHMEM2_HAS(bp, dcc_support)) + SHMEM2_WR(bp, dcc_support, + (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV | + SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV)); + if (SHMEM2_HAS(bp, afex_driver_support)) + SHMEM2_WR(bp, afex_driver_support, + SHMEM_AFEX_SUPPORTED_VERSION_ONE); + } + + /* Set AFEX default VLAN tag to an invalid value */ + bp->afex_def_vlan_tag = -1; } /** @@ -2095,10 +2293,12 @@ int bnx2x_load_cnic(struct bnx2x *bp) mutex_init(&bp->cnic_mutex); - rc = bnx2x_alloc_mem_cnic(bp); - if (rc) { - BNX2X_ERR("Unable to allocate bp memory for cnic\n"); - LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0); + if (IS_PF(bp)) { + rc = bnx2x_alloc_mem_cnic(bp); + if (rc) { + BNX2X_ERR("Unable to allocate bp memory for cnic\n"); + LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0); + } } rc = bnx2x_alloc_fp_mem_cnic(bp); @@ -2125,14 +2325,17 @@ int bnx2x_load_cnic(struct bnx2x *bp) bnx2x_nic_init_cnic(bp); - /* Enable Timer scan */ - REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1); - - for_each_cnic_queue(bp, i) { - rc = bnx2x_setup_queue(bp, &bp->fp[i], 0); - if (rc) { - BNX2X_ERR("Queue setup failed\n"); - LOAD_ERROR_EXIT(bp, load_error_cnic2); + if (IS_PF(bp)) { + /* Enable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1); + + /* setup cnic queues */ + for_each_cnic_queue(bp, i) { + rc = bnx2x_setup_queue(bp, &bp->fp[i], 0); + if (rc) { + BNX2X_ERR("Queue setup failed\n"); + LOAD_ERROR_EXIT(bp, load_error_cnic2); + } } } @@ -2178,8 +2381,7 @@ load_error_cnic0: int bnx2x_nic_load(struct bnx2x *bp, int load_mode) { int port = BP_PORT(bp); - u32 load_code; - int i, rc; + int i, rc = 0, load_code = 0; DP(NETIF_MSG_IFUP, "Starting NIC load\n"); DP(NETIF_MSG_IFUP, @@ -2201,8 +2403,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) &bp->last_reported_link.link_report_flags); bnx2x_release_phy_lock(bp); - /* must be called before memory allocation and HW init */ - bnx2x_ilt_set_info(bp); + if (IS_PF(bp)) + /* must be called before memory allocation and HW init */ + bnx2x_ilt_set_info(bp); /* * Zero fastpath structures preserving invariants like napi, which are @@ -2221,8 +2424,26 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) /* Set the receive queues buffer size */ bnx2x_set_rx_buf_size(bp); - if (bnx2x_alloc_mem(bp)) - return -ENOMEM; + if (IS_PF(bp)) { + rc = bnx2x_alloc_mem(bp); + if (rc) { + BNX2X_ERR("Unable to allocate bp memory\n"); + return rc; + } + } + + /* Allocated memory for FW statistics */ + if (bnx2x_alloc_fw_stats_mem(bp)) + LOAD_ERROR_EXIT(bp, load_error0); + + /* need to be done after alloc mem, since it's self adjusting to amount + * of memory available for RSS queues + */ + rc = bnx2x_alloc_fp_mem(bp); + if (rc) { + BNX2X_ERR("Unable to allocate memory for fps\n"); + LOAD_ERROR_EXIT(bp, load_error0); + } /* As long as bnx2x_alloc_mem() may possibly update * bp->num_queues, bnx2x_set_real_num_queues() should always @@ -2245,98 +2466,48 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) DP(NETIF_MSG_IFUP, "napi added\n"); bnx2x_napi_enable(bp); - /* set pf load just before approaching the MCP */ - bnx2x_set_pf_load(bp); - - /* Send LOAD_REQUEST command to MCP - * Returns the type of LOAD command: - * if it is the first port to be initialized - * common blocks should be initialized, otherwise - not - */ - if (!BP_NOMCP(bp)) { - /* init fw_seq */ - bp->fw_seq = - (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); - - /* Get current FW pulse sequence */ - bp->fw_drv_pulse_wr_seq = - (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) & - DRV_PULSE_SEQ_MASK); - BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq); - - load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, - DRV_MSG_CODE_LOAD_REQ_WITH_LFA); - if (!load_code) { - BNX2X_ERR("MCP response failure, aborting\n"); - rc = -EBUSY; - LOAD_ERROR_EXIT(bp, load_error1); - } - if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { - BNX2X_ERR("Driver load refused\n"); - rc = -EBUSY; /* other port in diagnostic mode */ - LOAD_ERROR_EXIT(bp, load_error1); - } - if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP && - load_code != FW_MSG_CODE_DRV_LOAD_COMMON) { - /* abort nic load if version mismatch */ - if (!bnx2x_test_firmware_version(bp, true)) { - rc = -EBUSY; + if (IS_PF(bp)) { + /* set pf load just before approaching the MCP */ + bnx2x_set_pf_load(bp); + + /* if mcp exists send load request and analyze response */ + if (!BP_NOMCP(bp)) { + /* attempt to load pf */ + rc = bnx2x_nic_load_request(bp, &load_code); + if (rc) + LOAD_ERROR_EXIT(bp, load_error1); + + /* what did mcp say? */ + rc = bnx2x_nic_load_analyze_req(bp, load_code); + if (rc) { + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); LOAD_ERROR_EXIT(bp, load_error2); } + } else { + load_code = bnx2x_nic_load_no_mcp(bp, port); } - } else { - int path = BP_PATH(bp); - - DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n", - path, load_count[path][0], load_count[path][1], - load_count[path][2]); - load_count[path][0]++; - load_count[path][1 + port]++; - DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n", - path, load_count[path][0], load_count[path][1], - load_count[path][2]); - if (load_count[path][0] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_COMMON; - else if (load_count[path][1 + port] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_PORT; - else - load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; - } + /* mark pmf if applicable */ + bnx2x_nic_load_pmf(bp, load_code); - if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || - (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) || - (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) { - bp->port.pmf = 1; - /* - * We need the barrier to ensure the ordering between the - * writing to bp->port.pmf here and reading it from the - * bnx2x_periodic_task(). - */ - smp_mb(); - } else - bp->port.pmf = 0; - - DP(NETIF_MSG_IFUP, "pmf %d\n", bp->port.pmf); + /* Init Function state controlling object */ + bnx2x__init_func_obj(bp); - /* Init Function state controlling object */ - bnx2x__init_func_obj(bp); - - /* Initialize HW */ - rc = bnx2x_init_hw(bp, load_code); - if (rc) { - BNX2X_ERR("HW init failed, aborting\n"); - bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); - LOAD_ERROR_EXIT(bp, load_error2); + /* Initialize HW */ + rc = bnx2x_init_hw(bp, load_code); + if (rc) { + BNX2X_ERR("HW init failed, aborting\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error2); + } } /* Connect to IRQs */ rc = bnx2x_setup_irqs(bp); if (rc) { - BNX2X_ERR("IRQs setup failed\n"); - bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + BNX2X_ERR("setup irqs failed\n"); + if (IS_PF(bp)) + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); LOAD_ERROR_EXIT(bp, load_error2); } @@ -2344,78 +2515,78 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bnx2x_nic_init(bp, load_code); /* Init per-function objects */ - bnx2x_init_bp_objs(bp); - - if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || - (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) && - (bp->common.shmem2_base)) { - if (SHMEM2_HAS(bp, dcc_support)) - SHMEM2_WR(bp, dcc_support, - (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV | - SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV)); - if (SHMEM2_HAS(bp, afex_driver_support)) - SHMEM2_WR(bp, afex_driver_support, - SHMEM_AFEX_SUPPORTED_VERSION_ONE); - } + if (IS_PF(bp)) { + bnx2x_init_bp_objs(bp); - /* Set AFEX default VLAN tag to an invalid value */ - bp->afex_def_vlan_tag = -1; - bp->state = BNX2X_STATE_OPENING_WAIT4_PORT; - rc = bnx2x_func_start(bp); - if (rc) { - BNX2X_ERR("Function start failed!\n"); - bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); - LOAD_ERROR_EXIT(bp, load_error3); - } + /* Set AFEX default VLAN tag to an invalid value */ + bp->afex_def_vlan_tag = -1; + bnx2x_nic_load_afex_dcc(bp, load_code); + bp->state = BNX2X_STATE_OPENING_WAIT4_PORT; + rc = bnx2x_func_start(bp); + if (rc) { + BNX2X_ERR("Function start failed!\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); - /* Send LOAD_DONE command to MCP */ - if (!BP_NOMCP(bp)) { - load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); - if (!load_code) { - BNX2X_ERR("MCP response failure, aborting\n"); - rc = -EBUSY; LOAD_ERROR_EXIT(bp, load_error3); } - } - rc = bnx2x_setup_leading(bp); - if (rc) { - BNX2X_ERR("Setup leading failed!\n"); - LOAD_ERROR_EXIT(bp, load_error3); - } + /* Send LOAD_DONE command to MCP */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, + DRV_MSG_CODE_LOAD_DONE, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + LOAD_ERROR_EXIT(bp, load_error3); + } + } - for_each_nondefault_eth_queue(bp, i) { - rc = bnx2x_setup_queue(bp, &bp->fp[i], 0); + /* setup the leading queue */ + rc = bnx2x_setup_leading(bp); if (rc) { - BNX2X_ERR("Queue setup failed\n"); + BNX2X_ERR("Setup leading failed!\n"); LOAD_ERROR_EXIT(bp, load_error3); } - } - rc = bnx2x_init_rss_pf(bp); - if (rc) { - BNX2X_ERR("PF RSS init failed\n"); - LOAD_ERROR_EXIT(bp, load_error3); + /* set up the rest of the queues */ + for_each_nondefault_eth_queue(bp, i) { + rc = bnx2x_setup_queue(bp, &bp->fp[i], 0); + if (rc) { + BNX2X_ERR("Queue setup failed\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } + } + + /* setup rss */ + rc = bnx2x_init_rss_pf(bp); + if (rc) { + BNX2X_ERR("PF RSS init failed\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } } /* Now when Clients are configured we are ready to work */ bp->state = BNX2X_STATE_OPEN; /* Configure a ucast MAC */ - rc = bnx2x_set_eth_mac(bp, true); + if (IS_PF(bp)) + rc = bnx2x_set_eth_mac(bp, true); if (rc) { BNX2X_ERR("Setting Ethernet MAC failed\n"); LOAD_ERROR_EXIT(bp, load_error3); } - if (bp->pending_max) { + if (IS_PF(bp) && bp->pending_max) { bnx2x_update_max_mf_config(bp, bp->pending_max); bp->pending_max = 0; } - if (bp->port.pmf) - bnx2x_initial_phy_init(bp, load_mode); + if (bp->port.pmf) { + rc = bnx2x_initial_phy_init(bp, load_mode); + if (rc) + LOAD_ERROR_EXIT(bp, load_error3); + } bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_BOOT_FROM_SAN; /* Start fast path */ @@ -2457,8 +2628,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (CNIC_ENABLED(bp)) bnx2x_load_cnic(bp); - /* mark driver is loaded in shmem2 */ - if (SHMEM2_HAS(bp, drv_capabilities_flag)) { + if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { + /* mark driver is loaded in shmem2 */ u32 val; val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]); SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], @@ -2467,7 +2638,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) } /* Wait for all pending SP commands to complete */ - if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) { + if (IS_PF(bp) && !bnx2x_wait_sp_comp(bp, ~0x0UL)) { BNX2X_ERR("Timeout waiting for SP elements to complete\n"); bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); return -EBUSY; @@ -2483,10 +2654,12 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) #ifndef BNX2X_STOP_ON_ERROR load_error3: - bnx2x_int_disable_sync(bp, 1); + if (IS_PF(bp)) { + bnx2x_int_disable_sync(bp, 1); - /* Clean queueable objects */ - bnx2x_squeeze_objects(bp); + /* Clean queueable objects */ + bnx2x_squeeze_objects(bp); + } /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); @@ -2496,7 +2669,7 @@ load_error3: /* Release IRQs */ bnx2x_free_irq(bp); load_error2: - if (!BP_NOMCP(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); } @@ -2504,15 +2677,35 @@ load_error2: bp->port.pmf = 0; load_error1: bnx2x_napi_disable(bp); + /* clear pf_load status, as it was already set */ - bnx2x_clear_pf_load(bp); + if (IS_PF(bp)) + bnx2x_clear_pf_load(bp); load_error0: + bnx2x_free_fp_mem(bp); + bnx2x_free_fw_stats_mem(bp); bnx2x_free_mem(bp); return rc; #endif /* ! BNX2X_STOP_ON_ERROR */ } +static int bnx2x_drain_tx_queues(struct bnx2x *bp) +{ + u8 rc = 0, cos, i; + + /* Wait until tx fastpath tasks complete */ + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + for_each_cos_in_tx_queue(fp, cos) + rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]); + if (rc) + return rc; + } + return 0; +} + /* must be called with rtnl_lock */ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) { @@ -2522,15 +2715,16 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) DP(NETIF_MSG_IFUP, "Starting NIC unload\n"); /* mark driver is unloaded in shmem2 */ - if (SHMEM2_HAS(bp, drv_capabilities_flag)) { + if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { u32 val; val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]); SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); } - if ((bp->state == BNX2X_STATE_CLOSED) || - (bp->state == BNX2X_STATE_ERROR)) { + if (IS_PF(bp) && + (bp->state == BNX2X_STATE_CLOSED || + bp->state == BNX2X_STATE_ERROR)) { /* We can get here if the driver has been unloaded * during parity error recovery and is either waiting for a * leader to complete or for other functions to unload and @@ -2567,13 +2761,16 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) del_timer_sync(&bp->timer); - /* Set ALWAYS_ALIVE bit in shmem */ - bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; - - bnx2x_drv_pulse(bp); + if (IS_PF(bp)) { + /* Set ALWAYS_ALIVE bit in shmem */ + bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; + bnx2x_drv_pulse(bp); + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_save_statistics(bp); + } - bnx2x_stats_handle(bp, STATS_EVENT_STOP); - bnx2x_save_statistics(bp); + /* wait till consumers catch up with producers in all queues */ + bnx2x_drain_tx_queues(bp); /* Cleanup the chip if needed */ if (unload_mode != UNLOAD_RECOVERY) @@ -2609,7 +2806,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) * At this stage no more interrupts will arrive so we may safly clean * the queueable objects here in case they failed to get cleaned so far. */ - bnx2x_squeeze_objects(bp); + if (IS_PF(bp)) + bnx2x_squeeze_objects(bp); /* There should be no more pending SP commands at this stage */ bp->sp_state = 0; @@ -2623,19 +2821,22 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) for_each_rx_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); - if (CNIC_LOADED(bp)) { + bnx2x_free_fp_mem(bp); + if (CNIC_LOADED(bp)) bnx2x_free_fp_mem_cnic(bp); - bnx2x_free_mem_cnic(bp); - } - bnx2x_free_mem(bp); + if (IS_PF(bp)) { + bnx2x_free_mem(bp); + if (CNIC_LOADED(bp)) + bnx2x_free_mem_cnic(bp); + } bp->state = BNX2X_STATE_CLOSED; bp->cnic_loaded = false; /* Check if there are pending parity attentions. If there are - set * RECOVERY_IN_PROGRESS. */ - if (bnx2x_chk_parity_attn(bp, &global, false)) { + if (IS_PF(bp) && bnx2x_chk_parity_attn(bp, &global, false)) { bnx2x_set_reset_in_progress(bp); /* Set RESET_IS_GLOBAL if needed */ @@ -2647,7 +2848,9 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) /* The last driver must disable a "close the gate" if there is no * parity attention or "process kill" pending. */ - if (!bnx2x_clear_pf_load(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp))) + if (IS_PF(bp) && + !bnx2x_clear_pf_load(bp) && + bnx2x_reset_is_done(bp, BP_PATH(bp))) bnx2x_disable_close_the_gate(bp); DP(NETIF_MSG_IFUP, "Ending NIC unload\n"); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index bca371e..91e432d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1128,11 +1128,18 @@ static inline u8 bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp) static inline u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) { struct bnx2x *bp = fp->bp; - - if (!CHIP_IS_E1x(bp)) - return USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); + u32 offset = BAR_USTRORM_INTMEM; + + if (IS_VF(bp)) + return PXP_VF_ADDR_USDM_QUEUES_START + + bp->acquire_resp.resc.hw_qid[fp->index] * + sizeof(struct ustorm_queue_zone_data); + else if (!CHIP_IS_E1x(bp)) + offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); else - return USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); + offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); + + return offset; } static inline void bnx2x_init_txdata(struct bnx2x *bp, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 277f17e..b7c82f9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -890,7 +890,7 @@ static void bnx2x_set_msglevel(struct net_device *dev, u32 level) if (capable(CAP_NET_ADMIN)) { /* dump MCP trace */ - if (level & BNX2X_MSG_MCP) + if (IS_PF(bp) && (level & BNX2X_MSG_MCP)) bnx2x_fw_dump_lvl(bp, KERN_INFO); bp->msg_enable = level; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 3dd5b26..6e07c70 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -2460,17 +2460,49 @@ void bnx2x__link_status_update(struct bnx2x *bp) return; /* read updated dcb configuration */ - bnx2x_dcbx_pmf_update(bp); - - bnx2x_link_status_update(&bp->link_params, &bp->link_vars); + if (IS_PF(bp)) { + bnx2x_dcbx_pmf_update(bp); + bnx2x_link_status_update(&bp->link_params, &bp->link_vars); + if (bp->link_vars.link_up) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + else + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* indicate link status */ + bnx2x_link_report(bp); - if (bp->link_vars.link_up) + } else { /* VF */ + bp->port.supported[0] |= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + bp->port.advertising[0] = bp->port.supported[0]; + + bp->link_params.bp = bp; + bp->link_params.port = BP_PORT(bp); + bp->link_params.req_duplex[0] = DUPLEX_FULL; + bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE; + bp->link_params.req_line_speed[0] = SPEED_10000; + bp->link_params.speed_cap_mask[0] = 0x7f0000; + bp->link_params.switch_cfg = SWITCH_CFG_10G; + bp->link_vars.mac_type = MAC_TYPE_BMAC; + bp->link_vars.line_speed = SPEED_10000; + bp->link_vars.link_status = + (LINK_STATUS_LINK_UP | + LINK_STATUS_SPEED_AND_DUPLEX_10GTFD); + bp->link_vars.link_up = 1; + bp->link_vars.duplex = DUPLEX_FULL; + bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE; + __bnx2x_link_report(bp); bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); - else - bnx2x_stats_handle(bp, STATS_EVENT_STOP); - - /* indicate link status */ - bnx2x_link_report(bp); + } } static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, @@ -5700,6 +5732,13 @@ static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) cids[cos] = fp->txdata_ptr[cos]->cid; } + /* nothing more for vf to do here */ + if (IS_VF(bp)) + return; + + bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, + fp->fw_sb_id, fp->igu_sb_id); + bnx2x_update_fpsb_idx(fp); bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids, fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), bnx2x_sp_mapping(bp, q_rdata), q_type); @@ -5709,13 +5748,10 @@ static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) */ bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX); - DP(NETIF_MSG_IFUP, "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", - fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, - fp->igu_sb_id); - bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, - fp->fw_sb_id, fp->igu_sb_id); - - bnx2x_update_fpsb_idx(fp); + DP(NETIF_MSG_IFUP, + "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", + fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, + fp->igu_sb_id); } static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata) @@ -5787,17 +5823,22 @@ void bnx2x_nic_init(struct bnx2x *bp, u32 load_code) for_each_eth_queue(bp, i) bnx2x_init_eth_fp(bp, i); + + /* ensure status block indices were read */ + rmb(); + bnx2x_init_rx_rings(bp); + bnx2x_init_tx_rings(bp); + + if (IS_VF(bp)) + return; + /* Initialize MOD_ABS interrupts */ bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id, bp->common.shmem_base, bp->common.shmem2_base, BP_PORT(bp)); - /* ensure status block indices were read */ - rmb(); bnx2x_init_def_sb(bp); bnx2x_update_dsb_idx(bp); - bnx2x_init_rx_rings(bp); - bnx2x_init_tx_rings(bp); bnx2x_init_sp_ring(bp); bnx2x_init_eq_ring(bp); bnx2x_init_internal(bp, load_code); @@ -9656,7 +9697,7 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) * the one required, then FLR will be sufficient to clean any residue * left by previous driver */ - rc = bnx2x_test_firmware_version(bp, false); + rc = bnx2x_nic_load_analyze_req(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION); if (!rc) { /* fw version is good */ @@ -11236,50 +11277,51 @@ static int bnx2x_open(struct net_device *dev) bnx2x_set_power_state(bp, PCI_D0); - other_load_status = bnx2x_get_load_status(bp, other_engine); - load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); - - /* - * If parity had happen during the unload, then attentions + /* If parity had happen during the unload, then attentions * and/or RECOVERY_IN_PROGRES may still be set. In this case we * want the first function loaded on the current engine to * complete the recovery. + * Parity recovery is only relevant for PF driver. */ - if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || - bnx2x_chk_parity_attn(bp, &global, true)) - do { - /* - * If there are attentions and they are in a global - * blocks, set the GLOBAL_RESET bit regardless whether - * it will be this function that will complete the - * recovery or not. - */ - if (global) - bnx2x_set_reset_global(bp); + if (IS_PF(bp)) { + other_load_status = bnx2x_get_load_status(bp, other_engine); + load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); + if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || + bnx2x_chk_parity_attn(bp, &global, true)) { + do { + /* If there are attentions and they are in a + * global blocks, set the GLOBAL_RESET bit + * regardless whether it will be this function + * that will complete the recovery or not. + */ + if (global) + bnx2x_set_reset_global(bp); - /* - * Only the first function on the current engine should - * try to recover in open. In case of attentions in - * global blocks only the first in the chip should try - * to recover. - */ - if ((!load_status && - (!global || !other_load_status)) && - bnx2x_trylock_leader_lock(bp) && - !bnx2x_leader_reset(bp)) { - netdev_info(bp->dev, "Recovered in open\n"); - break; - } + /* Only the first function on the current + * engine should try to recover in open. In case + * of attentions in global blocks only the first + * in the chip should try to recover. + */ + if ((!load_status && + (!global || !other_load_status)) && + bnx2x_trylock_leader_lock(bp) && + !bnx2x_leader_reset(bp)) { + netdev_info(bp->dev, + "Recovered in open\n"); + break; + } - /* recovery has failed... */ - bnx2x_set_power_state(bp, PCI_D3hot); - bp->recovery_state = BNX2X_RECOVERY_FAILED; + /* recovery has failed... */ + bnx2x_set_power_state(bp, PCI_D3hot); + bp->recovery_state = BNX2X_RECOVERY_FAILED; - BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n" - "If you still see this message after a few retries then power cycle is required.\n"); + BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n" + "If you still see this message after a few retries then power cycle is required.\n"); - return -EAGAIN; - } while (0); + return -EAGAIN; + } while (0); + } + } bp->recovery_state = BNX2X_RECOVERY_DONE; return bnx2x_nic_load(bp, LOAD_OPEN); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index c302de4..3f01526 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6559,6 +6559,12 @@ #define PXP_VF_ADDR_IGU_END\ ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1) +#define PXP_VF_ADDR_USDM_QUEUES_START 0x3000 +#define PXP_VF_ADDR_USDM_QUEUES_SIZE\ + (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE) +#define PXP_VF_ADDR_USDM_QUEUES_END\ + ((PXP_VF_ADDR_USDM_QUEUES_START) + (PXP_VF_ADDR_USDM_QUEUES_SIZE) - 1) + #define PXP_VF_ADDR_CSDM_GLOBAL_START 0x7600 #define PXP_VF_ADDR_CSDM_GLOBAL_SIZE (PXP_ADDR_REG_SIZE) #define PXP_VF_ADDR_CSDM_GLOBAL_END\ -- cgit v0.10.2 From 8d9ac297d18dbe05b6e7cb4378da51e67143b452 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:27 +0000 Subject: bnx2x: Add init, setup_q, set_mac to VF <-> PF channel 'init' - init an acquired VF. Supply allocation GPAs to PF. 'setup_q' - PF to allocate a queue in device on behalf of the VF. 'set_mac' - PF to configure a mac in device on behalf of the VF. VF driver uses these requests in the VF <-> PF channel in nic_load flow. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 634eb30..5c64d1d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -341,6 +341,9 @@ union db_prod { #define SGE_PAGE_SIZE PAGE_SIZE #define SGE_PAGE_SHIFT PAGE_SHIFT #define SGE_PAGE_ALIGN(addr) PAGE_ALIGN((typeof(PAGE_SIZE))(addr)) +#define SGE_PAGES (SGE_PAGE_SIZE * PAGES_PER_SGE) +#define TPA_AGG_SIZE min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \ + SGE_PAGES), 0xffff) /* SGE ring related macros */ #define NUM_RX_SGE_PAGES 2 @@ -2221,6 +2224,9 @@ int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id); int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping); int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); int bnx2x_vfpf_release(struct bnx2x *bp); +int bnx2x_vfpf_init(struct bnx2x *bp); +int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx); +int bnx2x_vfpf_set_mac(struct bnx2x *bp); int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code); /* Congestion management fairness mode */ #define CMNG_FNS_NONE 0 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 646bfd1..f7b23c2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2445,6 +2445,13 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) LOAD_ERROR_EXIT(bp, load_error0); } + /* request pf to initialize status blocks */ + if (IS_VF(bp)) { + rc = bnx2x_vfpf_init(bp); + if (rc) + LOAD_ERROR_EXIT(bp, load_error0); + } + /* As long as bnx2x_alloc_mem() may possibly update * bp->num_queues, bnx2x_set_real_num_queues() should always * come after it. At this stage cnic queues are not counted. @@ -2564,6 +2571,15 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) BNX2X_ERR("PF RSS init failed\n"); LOAD_ERROR_EXIT(bp, load_error3); } + + } else { /* vf */ + for_each_eth_queue(bp, i) { + rc = bnx2x_vfpf_setup_q(bp, i); + if (rc) { + BNX2X_ERR("Queue setup failed\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } + } } /* Now when Clients are configured we are ready to work */ @@ -2572,6 +2588,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) /* Configure a ucast MAC */ if (IS_PF(bp)) rc = bnx2x_set_eth_mac(bp, true); + else /* vf */ + rc = bnx2x_vfpf_set_mac(bp); if (rc) { BNX2X_ERR("Setting Ethernet MAC failed\n"); LOAD_ERROR_EXIT(bp, load_error3); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6e07c70..8ba054a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13428,3 +13428,166 @@ int bnx2x_vfpf_release(struct bnx2x *bp) return 0; } + +/* Tell PF about SB addresses */ +int bnx2x_vfpf_init(struct bnx2x *bp) +{ + struct vfpf_init_tlv *req = &bp->vf2pf_mbox->req.init; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc, i; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_INIT, sizeof(*req)); + + /* status blocks */ + for_each_eth_queue(bp, i) + req->sb_addr[i] = (dma_addr_t)bnx2x_fp(bp, i, + status_blk_mapping); + + /* statistics - requests only supports single queue for now */ + req->stats_addr = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, queue_stats); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + return rc; + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("INIT VF failed: %d. Breaking...\n", + resp->hdr.status); + return -EAGAIN; + } + + DP(BNX2X_MSG_SP, "INIT VF Succeeded\n"); + return 0; +} + +/* ask the pf to open a queue for the vf */ +int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx) +{ + struct vfpf_setup_q_tlv *req = &bp->vf2pf_mbox->req.setup_q; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; + u16 tpa_agg_size = 0, flags = 0; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SETUP_Q, sizeof(*req)); + + /* select tpa mode to request */ + if (!fp->disable_tpa) { + flags |= VFPF_QUEUE_FLG_TPA; + flags |= VFPF_QUEUE_FLG_TPA_IPV6; + if (fp->mode == TPA_MODE_GRO) + flags |= VFPF_QUEUE_FLG_TPA_GRO; + tpa_agg_size = TPA_AGG_SIZE; + } + + /* calculate queue flags */ + flags |= VFPF_QUEUE_FLG_STATS; + flags |= VFPF_QUEUE_FLG_CACHE_ALIGN; + flags |= IS_MF_SD(bp) ? VFPF_QUEUE_FLG_OV : 0; + flags |= VFPF_QUEUE_FLG_VLAN; + DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); + + /* Common */ + req->vf_qid = fp_idx; + req->param_valid = VFPF_RXQ_VALID | VFPF_TXQ_VALID; + + /* Rx */ + req->rxq.rcq_addr = fp->rx_comp_mapping; + req->rxq.rcq_np_addr = fp->rx_comp_mapping + BCM_PAGE_SIZE; + req->rxq.rxq_addr = fp->rx_desc_mapping; + req->rxq.sge_addr = fp->rx_sge_mapping; + req->rxq.vf_sb = fp_idx; + req->rxq.sb_index = HC_INDEX_ETH_RX_CQ_CONS; + req->rxq.hc_rate = bp->rx_ticks ? 1000000/bp->rx_ticks : 0; + req->rxq.mtu = bp->dev->mtu; + req->rxq.buf_sz = fp->rx_buf_size; + req->rxq.sge_buf_sz = BCM_PAGE_SIZE * PAGES_PER_SGE; + req->rxq.tpa_agg_sz = tpa_agg_size; + req->rxq.max_sge_pkt = SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT; + req->rxq.max_sge_pkt = ((req->rxq.max_sge_pkt + PAGES_PER_SGE - 1) & + (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; + req->rxq.flags = flags; + req->rxq.drop_flags = 0; + req->rxq.cache_line_log = BNX2X_RX_ALIGN_SHIFT; + req->rxq.stat_id = -1; /* No stats at the moment */ + + /* Tx */ + req->txq.txq_addr = fp->txdata_ptr[FIRST_TX_COS_INDEX]->tx_desc_mapping; + req->txq.vf_sb = fp_idx; + req->txq.sb_index = HC_INDEX_ETH_TX_CQ_CONS_COS0; + req->txq.hc_rate = bp->tx_ticks ? 1000000/bp->tx_ticks : 0; + req->txq.flags = flags; + req->txq.traffic_type = LLFC_TRAFFIC_TYPE_NW; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + BNX2X_ERR("Sending SETUP_Q message for queue[%d] failed!\n", + fp_idx); + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Status of SETUP_Q for queue[%d] is %d\n", + fp_idx, resp->hdr.status); + return -EINVAL; + } + return rc; +} + +/* request pf to add a mac for the vf */ +int bnx2x_vfpf_set_mac(struct bnx2x *bp) +{ + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + req->flags = VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED; + req->vf_qid = 0; + req->n_mac_vlan_filters = 1; + req->filters[0].flags = + VFPF_Q_FILTER_DEST_MAC_VALID | VFPF_Q_FILTER_SET_MAC; + + /* copy mac from device to request */ + memcpy(req->filters[0].mac, bp->dev->dev_addr, ETH_ALEN); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("failed to send message to pf. rc was %d\n", rc); + return rc; + } + + /* PF failed the transaction */ + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("vfpf SET MAC failed: %d\n", resp->hdr.status); + return -EINVAL; + } + + return 0; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 561c656..12889f0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -38,6 +38,22 @@ struct hw_sb_info { */ #define TLV_BUFFER_SIZE 1024 +#define VFPF_QUEUE_FLG_TPA 0x0001 +#define VFPF_QUEUE_FLG_TPA_IPV6 0x0002 +#define VFPF_QUEUE_FLG_TPA_GRO 0x0004 +#define VFPF_QUEUE_FLG_CACHE_ALIGN 0x0008 +#define VFPF_QUEUE_FLG_STATS 0x0010 +#define VFPF_QUEUE_FLG_OV 0x0020 +#define VFPF_QUEUE_FLG_VLAN 0x0040 +#define VFPF_QUEUE_FLG_COS 0x0080 +#define VFPF_QUEUE_FLG_HC 0x0100 +#define VFPF_QUEUE_FLG_DHC 0x0200 + +#define VFPF_QUEUE_DROP_IP_CS_ERR (1 << 0) +#define VFPF_QUEUE_DROP_TCP_CS_ERR (1 << 1) +#define VFPF_QUEUE_DROP_TTL0 (1 << 2) +#define VFPF_QUEUE_DROP_UDP_CS_ERR (1 << 3) + enum { PFVF_STATUS_WAITING = 0, PFVF_STATUS_SUCCESS, @@ -130,6 +146,107 @@ struct pfvf_acquire_resp_tlv { } resc; }; +/* Init VF */ +struct vfpf_init_tlv { + struct vfpf_first_tlv first_tlv; + aligned_u64 sb_addr[PFVF_MAX_SBS_PER_VF]; /* vf_sb based */ + aligned_u64 spq_addr; + aligned_u64 stats_addr; +}; + +/* Setup Queue */ +struct vfpf_setup_q_tlv { + struct vfpf_first_tlv first_tlv; + + struct vf_pf_rxq_params { + /* physical addresses */ + aligned_u64 rcq_addr; + aligned_u64 rcq_np_addr; + aligned_u64 rxq_addr; + aligned_u64 sge_addr; + + /* sb + hc info */ + u8 vf_sb; /* index in hw_sbs[] */ + u8 sb_index; /* Index in the SB */ + u16 hc_rate; /* desired interrupts per sec. */ + /* valid iff VFPF_QUEUE_FLG_HC */ + /* rx buffer info */ + u16 mtu; + u16 buf_sz; + u16 flags; /* VFPF_QUEUE_FLG_X flags */ + u16 stat_id; /* valid iff VFPF_QUEUE_FLG_STATS */ + + /* valid iff VFPF_QUEUE_FLG_TPA */ + u16 sge_buf_sz; + u16 tpa_agg_sz; + u8 max_sge_pkt; + + u8 drop_flags; /* VFPF_QUEUE_DROP_X, for Linux VMs + * all the flags are turned off + */ + + u8 cache_line_log; /* VFPF_QUEUE_FLG_CACHE_ALIGN */ + u8 padding; + } rxq; + + struct vf_pf_txq_params { + /* physical addresses */ + aligned_u64 txq_addr; + + /* sb + hc info */ + u8 vf_sb; /* index in hw_sbs[] */ + u8 sb_index; /* Index in the SB */ + u16 hc_rate; /* desired interrupts per sec. */ + /* valid iff VFPF_QUEUE_FLG_HC */ + u32 flags; /* VFPF_QUEUE_FLG_X flags */ + u16 stat_id; /* valid iff VFPF_QUEUE_FLG_STATS */ + u8 traffic_type; /* see in setup_context() */ + u8 padding; + } txq; + + u8 vf_qid; /* index in hw_qid[] */ + u8 param_valid; +#define VFPF_RXQ_VALID 0x01 +#define VFPF_TXQ_VALID 0x02 + u8 padding[2]; +}; + +/* Set Queue Filters */ +struct vfpf_q_mac_vlan_filter { + u32 flags; +#define VFPF_Q_FILTER_DEST_MAC_VALID 0x01 +#define VFPF_Q_FILTER_VLAN_TAG_VALID 0x02 +#define VFPF_Q_FILTER_SET_MAC 0x100 /* set/clear */ + u8 mac[ETH_ALEN]; + u16 vlan_tag; +}; + +/* configure queue filters */ +struct vfpf_set_q_filters_tlv { + struct vfpf_first_tlv first_tlv; + + u32 flags; +#define VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED 0x01 +#define VFPF_SET_Q_FILTERS_MULTICAST_CHANGED 0x02 +#define VFPF_SET_Q_FILTERS_RX_MASK_CHANGED 0x04 + + u8 vf_qid; /* index in hw_qid[] */ + u8 n_mac_vlan_filters; + u8 n_multicast; + u8 padding; + +#define PFVF_MAX_MAC_FILTERS 16 +#define PFVF_MAX_VLAN_FILTERS 16 +#define PFVF_MAX_FILTERS (PFVF_MAX_MAC_FILTERS +\ + PFVF_MAX_VLAN_FILTERS) + struct vfpf_q_mac_vlan_filter filters[PFVF_MAX_FILTERS]; + +#define PFVF_MAX_MULTICAST_PER_VF 32 + u8 multicast[PFVF_MAX_MULTICAST_PER_VF][ETH_ALEN]; + + u32 rx_mask; /* see mask constants at the top of the file */ +}; + /* release the VF's acquired resources */ struct vfpf_release_tlv { struct vfpf_first_tlv first_tlv; @@ -144,6 +261,9 @@ struct tlv_buffer_size { union vfpf_tlvs { struct vfpf_first_tlv first_tlv; struct vfpf_acquire_tlv acquire; + struct vfpf_init_tlv init; + struct vfpf_setup_q_tlv setup_q; + struct vfpf_set_q_filters_tlv set_q_filters; struct vfpf_release_tlv release; struct channel_list_end_tlv list_end; struct tlv_buffer_size tlv_buf_size; @@ -161,6 +281,9 @@ union pfvf_tlvs { enum channel_tlvs { CHANNEL_TLV_NONE, CHANNEL_TLV_ACQUIRE, + CHANNEL_TLV_INIT, + CHANNEL_TLV_SETUP_Q, + CHANNEL_TLV_SET_Q_FILTERS, CHANNEL_TLV_RELEASE, CHANNEL_TLV_LIST_END, CHANNEL_TLV_MAX -- cgit v0.10.2 From 9b176b6b63ed07472c26b6833a0ac23b373e6bf8 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:28 +0000 Subject: bnx2x: Add teardown_q and close to VF <-> PF channel When a VF is being closed its queues are released via the 'teardown_q' and the VF itself is closed with 'close'. These are essentially the unload counterparts of 'init' and 'setup_q' from the load flow. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 5c64d1d..82c6233 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2225,7 +2225,9 @@ int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping); int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); int bnx2x_vfpf_release(struct bnx2x *bp); int bnx2x_vfpf_init(struct bnx2x *bp); +void bnx2x_vfpf_close_vf(struct bnx2x *bp); int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx); +int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx); int bnx2x_vfpf_set_mac(struct bnx2x *bp); int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code); /* Congestion management fairness mode */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index f7b23c2..362451d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2790,8 +2790,13 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) /* wait till consumers catch up with producers in all queues */ bnx2x_drain_tx_queues(bp); - /* Cleanup the chip if needed */ - if (unload_mode != UNLOAD_RECOVERY) + /* if VF indicate to PF this function is going down (PF will delete sp + * elements and clear initializations + */ + if (IS_VF(bp)) + bnx2x_vfpf_close_vf(bp); + else if (unload_mode != UNLOAD_RECOVERY) + /* if this is a normal/close unload need to clean up chip*/ bnx2x_chip_cleanup(bp, unload_mode, keep_link); else { /* Send the UNLOAD_REQUEST to the MCP */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 8ba054a..2bf7dcc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13469,6 +13469,55 @@ int bnx2x_vfpf_init(struct bnx2x *bp) return 0; } +/* CLOSE VF - opposite to INIT_VF */ +void bnx2x_vfpf_close_vf(struct bnx2x *bp) +{ + struct vfpf_close_tlv *req = &bp->vf2pf_mbox->req.close; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int i, rc; + u32 vf_id; + + /* If we haven't got a valid VF id, there is no sense to + * continue with sending messages + */ + if (bnx2x_get_vf_id(bp, &vf_id)) + goto free_irq; + + /* Close the queues */ + for_each_queue(bp, i) + bnx2x_vfpf_teardown_queue(bp, i); + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_CLOSE, sizeof(*req)); + + req->vf_id = vf_id; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) + BNX2X_ERR("Sending CLOSE failed. rc was: %d\n", rc); + + else if (resp->hdr.status != PFVF_STATUS_SUCCESS) + BNX2X_ERR("Sending CLOSE failed: pf response was %d\n", + resp->hdr.status); + +free_irq: + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + + /* Release IRQs */ + bnx2x_free_irq(bp); +} + /* ask the pf to open a queue for the vf */ int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx) { @@ -13549,6 +13598,42 @@ int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx) return rc; } +int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx) +{ + struct vfpf_q_op_tlv *req = &bp->vf2pf_mbox->req.q_op; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_TEARDOWN_Q, + sizeof(*req)); + + req->vf_qid = qidx; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) { + BNX2X_ERR("Sending TEARDOWN for queue %d failed: %d\n", qidx, + rc); + return rc; + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("TEARDOWN for queue %d failed: %d\n", qidx, + resp->hdr.status); + return -EINVAL; + } + + return 0; +} + /* request pf to add a mac for the vf */ int bnx2x_vfpf_set_mac(struct bnx2x *bp) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 12889f0..ed4a618 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -111,6 +111,13 @@ struct vfpf_acquire_tlv { aligned_u64 bulletin_addr; }; +/* simple operation request on queue */ +struct vfpf_q_op_tlv { + struct vfpf_first_tlv first_tlv; + u8 vf_qid; + u8 padding[3]; +}; + /* acquire response tlv - carries the allocated resources */ struct pfvf_acquire_resp_tlv { struct pfvf_tlv hdr; @@ -247,6 +254,13 @@ struct vfpf_set_q_filters_tlv { u32 rx_mask; /* see mask constants at the top of the file */ }; +/* close VF (disable VF) */ +struct vfpf_close_tlv { + struct vfpf_first_tlv first_tlv; + u16 vf_id; /* for debug */ + u8 padding[2]; +}; + /* release the VF's acquired resources */ struct vfpf_release_tlv { struct vfpf_first_tlv first_tlv; @@ -262,6 +276,8 @@ union vfpf_tlvs { struct vfpf_first_tlv first_tlv; struct vfpf_acquire_tlv acquire; struct vfpf_init_tlv init; + struct vfpf_close_tlv close; + struct vfpf_q_op_tlv q_op; struct vfpf_setup_q_tlv setup_q; struct vfpf_set_q_filters_tlv set_q_filters; struct vfpf_release_tlv release; @@ -284,6 +300,8 @@ enum channel_tlvs { CHANNEL_TLV_INIT, CHANNEL_TLV_SETUP_Q, CHANNEL_TLV_SET_Q_FILTERS, + CHANNEL_TLV_TEARDOWN_Q, + CHANNEL_TLV_CLOSE, CHANNEL_TLV_RELEASE, CHANNEL_TLV_LIST_END, CHANNEL_TLV_MAX -- cgit v0.10.2 From 381ac16b10ae9369ebbbd74bb52b970818f68022 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:29 +0000 Subject: bnx2x: Support ndo_set_rxmode in VF driver The VF driver uses the 'q_filter' request in the VF <-> PF channel to have the PF configure the requested rxmode to device. ndo_set_rxmode is called under bottom half lock, so sleeping until the response arrives over the VF <-> PF channel is out of the question. For this reason the VF driver returns from the ndo after scheduling a work item, which in turn processes the rx mode request and adds the classification information through the VF <-> PF channel accordingly. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 82c6233..2fe1908 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1191,6 +1191,8 @@ enum { BNX2X_SP_RTNL_TX_TIMEOUT, BNX2X_SP_RTNL_AFEX_F_UPDATE, BNX2X_SP_RTNL_FAN_FAILURE, + BNX2X_SP_RTNL_VFPF_MCAST, + BNX2X_SP_RTNL_VFPF_STORM_RX_MODE, }; @@ -2229,6 +2231,9 @@ void bnx2x_vfpf_close_vf(struct bnx2x *bp); int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx); int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx); int bnx2x_vfpf_set_mac(struct bnx2x *bp); +int bnx2x_vfpf_set_mcast(struct net_device *dev); +int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp); + int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code); /* Congestion management fairness mode */ #define CMNG_FNS_NONE 0 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 2bf7dcc..d278205 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9403,6 +9403,19 @@ sp_rtnl_not_reset: bnx2x_close(bp->dev); } + if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) { + DP(BNX2X_MSG_SP, + "sending set mcast vf pf channel message from rtnl sp-task\n"); + bnx2x_vfpf_set_mcast(bp->dev); + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_STORM_RX_MODE, + &bp->sp_rtnl_state)) { + DP(BNX2X_MSG_SP, + "sending set storm rx mode vf pf channel message from rtnl sp-task\n"); + bnx2x_vfpf_storm_rx_mode(bp); + } + sp_rtnl_exit: rtnl_unlock(); } @@ -11479,12 +11492,25 @@ void bnx2x_set_rx_mode(struct net_device *dev) CHIP_IS_E1(bp))) rx_mode = BNX2X_RX_MODE_ALLMULTI; else { - /* some multicasts */ - if (bnx2x_set_mc_list(bp) < 0) - rx_mode = BNX2X_RX_MODE_ALLMULTI; + if (IS_PF(bp)) { + /* some multicasts */ + if (bnx2x_set_mc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_ALLMULTI; - if (bnx2x_set_uc_list(bp) < 0) - rx_mode = BNX2X_RX_MODE_PROMISC; + if (bnx2x_set_uc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_PROMISC; + } else { + /* configuring mcast to a vf involves sleeping (when we + * wait for the pf's response). Since this function is + * called from non sleepable context we must schedule + * a work item for this purpose + */ + smp_mb__before_clear_bit(); + set_bit(BNX2X_SP_RTNL_VFPF_MCAST, + &bp->sp_rtnl_state); + smp_mb__after_clear_bit(); + schedule_delayed_work(&bp->sp_rtnl_task, 0); + } } bp->rx_mode = rx_mode; @@ -11498,7 +11524,20 @@ void bnx2x_set_rx_mode(struct net_device *dev) return; } - bnx2x_set_storm_rx_mode(bp); + if (IS_PF(bp)) { + bnx2x_set_storm_rx_mode(bp); + } else { + /* configuring rx mode to storms in a vf involves sleeping (when + * we wait for the pf's response). Since this function is + * called from non sleepable context we must schedule + * a work item for this purpose + */ + smp_mb__before_clear_bit(); + set_bit(BNX2X_SP_RTNL_VFPF_STORM_RX_MODE, + &bp->sp_rtnl_state); + smp_mb__after_clear_bit(); + schedule_delayed_work(&bp->sp_rtnl_task, 0); + } } /* called with rtnl_lock */ @@ -13676,3 +13715,125 @@ int bnx2x_vfpf_set_mac(struct bnx2x *bp) return 0; } + +int bnx2x_vfpf_set_mcast(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc, i = 0; + struct netdev_hw_addr *ha; + + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); + return -EINVAL; + } + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + /* Get Rx mode requested */ + DP(NETIF_MSG_IFUP, "dev->flags = %x\n", dev->flags); + + netdev_for_each_mc_addr(ha, dev) { + DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n", + bnx2x_mc_addr(ha)); + memcpy(req->multicast[i], bnx2x_mc_addr(ha), ETH_ALEN); + i++; + } + + /* We support four PFVF_MAX_MULTICAST_PER_VF mcast + * addresses tops + */ + if (i >= PFVF_MAX_MULTICAST_PER_VF) { + DP(NETIF_MSG_IFUP, + "VF supports not more than %d multicast MAC addresses\n", + PFVF_MAX_MULTICAST_PER_VF); + return -EINVAL; + } + + req->n_multicast = i; + req->flags |= VFPF_SET_Q_FILTERS_MULTICAST_CHANGED; + req->vf_qid = 0; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("Sending a message failed: %d\n", rc); + return rc; + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Set Rx mode/multicast failed: %d\n", + resp->hdr.status); + return -EINVAL; + } + + return 0; +} + +int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp) +{ + int mode = bp->rx_mode; + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + DP(NETIF_MSG_IFUP, "Rx mode is %d\n", mode); + + switch (mode) { + case BNX2X_RX_MODE_NONE: /* no Rx */ + req->rx_mask = VFPF_RX_MASK_ACCEPT_NONE; + break; + case BNX2X_RX_MODE_NORMAL: + req->rx_mask = VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + break; + case BNX2X_RX_MODE_ALLMULTI: + req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + break; + case BNX2X_RX_MODE_PROMISC: + req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_ALL_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + break; + default: + BNX2X_ERR("BAD rx mode (%d)\n", mode); + return -EINVAL; + } + + req->flags |= VFPF_SET_Q_FILTERS_RX_MASK_CHANGED; + req->vf_qid = 0; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + BNX2X_ERR("Sending a message failed: %d\n", rc); + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Set Rx mode failed: %d\n", resp->hdr.status); + return -EINVAL; + } + + return rc; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index ed4a618..bf11e08 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -54,6 +54,13 @@ struct hw_sb_info { #define VFPF_QUEUE_DROP_TTL0 (1 << 2) #define VFPF_QUEUE_DROP_UDP_CS_ERR (1 << 3) +#define VFPF_RX_MASK_ACCEPT_NONE 0x00000000 +#define VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST 0x00000001 +#define VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST 0x00000002 +#define VFPF_RX_MASK_ACCEPT_ALL_UNICAST 0x00000004 +#define VFPF_RX_MASK_ACCEPT_ALL_MULTICAST 0x00000008 +#define VFPF_RX_MASK_ACCEPT_BROADCAST 0x00000010 + enum { PFVF_STATUS_WAITING = 0, PFVF_STATUS_SUCCESS, -- cgit v0.10.2 From dc1ba591463ca0f7ba2ac9af6ee4a5305f27ca1f Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:30 +0000 Subject: bnx2x: VF fastpath When VF driver is transmitting it must supply the correct mac address in the parsing BD. This is used for firmware validation and enforcement and also for tx-switching. Refactor interrupt ack flow to allow for different BAR addresses of the hardware in the PF BAR vs the VF BAR. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 362451d..18baf75 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3472,8 +3472,18 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) cpu_to_le16(vlan_tx_tag_get(skb)); tx_start_bd->bd_flags.as_bitfield |= (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); - } else - tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } else { + /* when transmitting in a vf, start bd must hold the ethertype + * for fw to enforce it + */ + if (IS_VF(bp)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + /* used by FW for packet accounting */ + tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } + } /* turn on parsing and get a BD */ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); @@ -3489,9 +3499,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) hlen = bnx2x_set_pbd_csum_e2(bp, skb, &pbd_e2_parsing_data, xmit_type); - if (IS_MF_SI(bp)) { - /* - * fill in the MAC addresses in the PBD - for local + + if (IS_MF_SI(bp) || IS_VF(bp)) { + /* fill in the MAC addresses in the PBD - for local * switching */ bnx2x_set_fw_mac_addr(&pbd_e2->src_mac_addr_hi, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 91e432d..6b0add2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -499,6 +499,39 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc); /* select_queue callback */ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb); +static inline void bnx2x_update_rx_prod(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + u16 bd_prod, u16 rx_comp_prod, + u16 rx_sge_prod) +{ + struct ustorm_eth_rx_producers rx_prods = {0}; + u32 i; + + /* Update producers */ + rx_prods.bd_prod = bd_prod; + rx_prods.cqe_prod = rx_comp_prod; + rx_prods.sge_prod = rx_sge_prod; + + /* Make sure that the BD and SGE data is updated before updating the + * producers since FW might read the BD/SGE right after the producer + * is updated. + * This is only applicable for weak-ordered memory model archs such + * as IA-64. The following barrier is also mandatory since FW will + * assumes BDs must have buffers. + */ + wmb(); + + for (i = 0; i < sizeof(rx_prods)/4; i++) + REG_WR(bp, fp->ustorm_rx_prods_offset + i*4, + ((u32 *)&rx_prods)[i]); + + mmiowb(); /* keep prod updates ordered */ + + DP(NETIF_MSG_RX_STATUS, + "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n", + fp->index, bd_prod, rx_comp_prod, rx_sge_prod); +} + /* reload helper */ int bnx2x_reload_if_running(struct net_device *dev); @@ -507,9 +540,6 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p); /* NAPI poll Rx part */ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget); -void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp, - u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod); - /* NAPI poll Tx part */ int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata); @@ -612,38 +642,6 @@ static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp) fp->fp_hc_idx = fp->sb_running_index[SM_RX_ID]; } -static inline void bnx2x_update_rx_prod_gen(struct bnx2x *bp, - struct bnx2x_fastpath *fp, u16 bd_prod, - u16 rx_comp_prod, u16 rx_sge_prod, u32 start) -{ - struct ustorm_eth_rx_producers rx_prods = {0}; - u32 i; - - /* Update producers */ - rx_prods.bd_prod = bd_prod; - rx_prods.cqe_prod = rx_comp_prod; - rx_prods.sge_prod = rx_sge_prod; - - /* - * Make sure that the BD and SGE data is updated before updating the - * producers since FW might read the BD/SGE right after the producer - * is updated. - * This is only applicable for weak-ordered memory model archs such - * as IA-64. The following barrier is also mandatory since FW will - * assumes BDs must have buffers. - */ - wmb(); - - for (i = 0; i < sizeof(rx_prods)/4; i++) - REG_WR(bp, start + i*4, ((u32 *)&rx_prods)[i]); - - mmiowb(); /* keep prod updates ordered */ - - DP(NETIF_MSG_RX_STATUS, - "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n", - fp->index, bd_prod, rx_comp_prod, rx_sge_prod); -} - static inline void bnx2x_igu_ack_sb_gen(struct bnx2x *bp, u8 igu_sb_id, u8 segment, u16 index, u8 op, u8 update, u32 igu_addr) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index d278205..aafcaf6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1697,15 +1697,6 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) return; } -void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp, - u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod) -{ - u32 start = BAR_USTRORM_INTMEM + fp->ustorm_rx_prods_offset; - - bnx2x_update_rx_prod_gen(bp, fp, bd_prod, rx_comp_prod, rx_sge_prod, - start); -} - irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) { struct bnx2x *bp = netdev_priv(dev_instance); @@ -4620,8 +4611,8 @@ static void bnx2x_attn_int(struct bnx2x *bp) void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, u16 index, u8 op, u8 update) { - u32 igu_addr = BAR_IGU_INTMEM + (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; - + u32 igu_addr = bp->igu_base_addr; + igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, igu_addr); } -- cgit v0.10.2 From 290ca2bb456d4214f00ba0b83fcb9793963fe007 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:31 +0000 Subject: bnx2x: Allocate VF database in PF when VFs are present When A PF determines that it may have to manage SRIOV VFs it allocates a database for this purpose. The database is intended to keep track of the VF state, the resources allocated for each VF (queues, interrupt vectors, etc), the state of the VF's queues. When the VF loads the database is updated accordingly. When A VF closes the database is consulted to determine which resources need to be released (close queues against device, reclaim interrupt vectors, etc). Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile index d862ea6..2ef6803 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/Makefile +++ b/drivers/net/ethernet/broadcom/bnx2x/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_BNX2X) += bnx2x.o -bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_vfpf.o +bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_vfpf.o bnx2x_sriov.o diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 2fe1908..027a4a3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -13,9 +13,12 @@ #ifndef BNX2X_H #define BNX2X_H + +#include #include #include #include +#include /* compilation time flags */ @@ -966,6 +969,7 @@ extern struct workqueue_struct *bnx2x_wq; #define BNX2X_MAX_NUM_OF_VFS 64 #define BNX2X_VF_CID_WND 0 #define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) +#define BNX2X_FIRST_VF_CID 256 #define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) #define BNX2X_VF_ID_INVALID 0xFF @@ -1117,6 +1121,7 @@ struct hw_context { /* forward */ struct bnx2x_ilt; +struct bnx2x_vfdb; enum bnx2x_recovery_state { BNX2X_RECOVERY_DONE, @@ -1606,6 +1611,9 @@ struct bnx2x { char fw_ver[32]; const struct firmware *firmware; + struct bnx2x_vfdb *vfdb; +#define IS_SRIOV(bp) ((bp)->vfdb) + /* DCB support on/off */ u16 dcb_state; #define BNX2X_DCB_STATE_OFF 0 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index aafcaf6..6188ec6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -7270,12 +7270,21 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) ilt = BP_ILT(bp); cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + if (IS_SRIOV(bp)) + cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS; + cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start); + + /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes + * those of the VFs, so start line should be reset + */ + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; for (i = 0; i < L2_ILT_LINES(bp); i++) { ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt; ilt->lines[cdu_ilt_start + i].page_mapping = bp->context[i].cxt_mapping; ilt->lines[cdu_ilt_start + i].size = bp->context[i].size; } + bnx2x_ilt_init_op(bp, INITOP_SET); if (!CONFIGURE_NIC_MODE(bp)) { @@ -7881,6 +7890,8 @@ int bnx2x_set_int_mode(struct bnx2x *bp) /* must be called prior to any HW initializations */ static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) { + if (IS_SRIOV(bp)) + return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS; return L2_ILT_LINES(bp); } @@ -12106,8 +12117,12 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp) { int cid_count = BNX2X_L2_MAX_CID(bp); + if (IS_SRIOV(bp)) + cid_count += BNX2X_VF_CIDS; + if (CNIC_SUPPORT(bp)) cid_count += CNIC_CID_MAX; + return roundup(cid_count, QM_CID_ROUND); } @@ -12312,6 +12327,16 @@ static int bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } + /* Enable SRIOV if capability found in configuration space. + * Once the generic SR-IOV framework makes it in from the + * pci tree this will be revised, to allow dynamic control + * over the number of VFs. Right now, change the num of vfs + * param below to enable SR-IOV. + */ + rc = bnx2x_iov_init_one(bp, int_mode, 0/*num vfs*/); + if (rc) + goto init_one_exit; + /* calc qm_cid_count */ bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); @@ -12435,6 +12460,9 @@ static void bnx2x_remove_one(struct pci_dev *pdev) /* Make sure RESET task is not scheduled before continuing */ cancel_delayed_work_sync(&bp->sp_rtnl_task); + + bnx2x_iov_remove_one(bp); + /* send message via vfpf channel to release the resources of this vf */ if (IS_VF(bp)) bnx2x_vfpf_release(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 3f01526..00e4398 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6305,6 +6305,15 @@ #define PCI_PM_DATA_B 0x414 #define PCI_ID_VAL1 0x434 #define PCI_ID_VAL2 0x438 +#define GRC_CONFIG_REG_PF_INIT_VF 0x624 +#define GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK 0xf +/* First VF_NUM for PF is encoded in this register. + * The number of VFs assigned to a PF is assumed to be a multiple of 8. + * Software should program these bits based on Total Number of VFs \ + * programmed for each PF. + * Since registers from 0x000-0x7ff are split across functions, each PF will + * have the same location for the same 4 bits + */ #define PXPCS_TL_CONTROL_5 0x814 #define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c new file mode 100644 index 0000000..f92bf8b --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -0,0 +1,304 @@ +/* bnx2x_sriov.c: Broadcom Everest network driver. + * + * Copyright 2009-2012 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein + * Written by: Shmulik Ravid + * Ariel Elior + * + */ +#include "bnx2x.h" +#include "bnx2x_init.h" +#include "bnx2x_sriov.h" +int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) +{ + int idx; + + for_each_vf(bp, idx) + if (bnx2x_vf(bp, idx, abs_vfid) == abs_vfid) + break; + return idx; +} + +static +struct bnx2x_virtf *bnx2x_vf_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) +{ + u16 idx = (u16)bnx2x_vf_idx_by_abs_fid(bp, abs_vfid); + return (idx < BNX2X_NR_VIRTFN(bp)) ? BP_VF(bp, idx) : NULL; +} + +static int bnx2x_ari_enabled(struct pci_dev *dev) +{ + return dev->bus->self && dev->bus->self->ari_enabled; +} + +static void +bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid) +{ + struct bnx2x_virtf *vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + if (vf) { + if (!vf_sb_count(vf)) + vf->igu_base_id = igu_sb_id; + ++vf_sb_count(vf); + } +} + +static void +bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) +{ + int sb_id; + u32 val; + u8 fid; + + /* IGU in normal mode - read CAM */ + for (sb_id = 0; sb_id < IGU_REG_MAPPING_MEMORY_SIZE; sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); + if (!(fid & IGU_FID_ENCODE_IS_PF)) + bnx2x_vf_set_igu_info(bp, sb_id, + (fid & IGU_FID_VF_NUM_MASK)); + + DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", + ((fid & IGU_FID_ENCODE_IS_PF) ? "PF" : "VF"), + ((fid & IGU_FID_ENCODE_IS_PF) ? (fid & IGU_FID_PF_NUM_MASK) : + (fid & IGU_FID_VF_NUM_MASK)), sb_id, + GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)); + } +} + +static void __bnx2x_iov_free_vfdb(struct bnx2x *bp) +{ + if (bp->vfdb) { + kfree(bp->vfdb->vfqs); + kfree(bp->vfdb->vfs); + kfree(bp->vfdb); + } + bp->vfdb = NULL; +} + +static int bnx2x_sriov_pci_cfg_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + int pos; + struct pci_dev *dev = bp->pdev; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) { + BNX2X_ERR("failed to find SRIOV capability in device\n"); + return -ENODEV; + } + + iov->pos = pos; + DP(BNX2X_MSG_IOV, "sriov ext pos %d\n", pos); + pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &iov->ctrl); + pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &iov->total); + pci_read_config_word(dev, pos + PCI_SRIOV_INITIAL_VF, &iov->initial); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &iov->offset); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &iov->stride); + pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &iov->pgsz); + pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); + pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); + + return 0; +} + +static int bnx2x_sriov_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + u32 val; + + /* read the SRIOV capability structure + * The fields can be read via configuration read or + * directly from the device (starting at offset PCICFG_OFFSET) + */ + if (bnx2x_sriov_pci_cfg_info(bp, iov)) + return -ENODEV; + + /* get the number of SRIOV bars */ + iov->nres = 0; + + /* read the first_vfid */ + val = REG_RD(bp, PCICFG_OFFSET + GRC_CONFIG_REG_PF_INIT_VF); + iov->first_vf_in_pf = ((val & GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK) + * 8) - (BNX2X_MAX_NUM_OF_VFS * BP_PATH(bp)); + + DP(BNX2X_MSG_IOV, + "IOV info[%d]: first vf %d, nres %d, cap 0x%x, ctrl 0x%x, total %d, initial %d, num vfs %d, offset %d, stride %d, page size 0x%x\n", + BP_FUNC(bp), + iov->first_vf_in_pf, iov->nres, iov->cap, iov->ctrl, iov->total, + iov->initial, iov->nr_virtfn, iov->offset, iov->stride, iov->pgsz); + + return 0; +} + +static u8 bnx2x_iov_get_max_queue_count(struct bnx2x *bp) +{ + int i; + u8 queue_count = 0; + + if (IS_SRIOV(bp)) + for_each_vf(bp, i) + queue_count += bnx2x_vf(bp, i, alloc_resc.num_sbs); + + return queue_count; +} + +/* must be called after PF bars are mapped */ +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, + int num_vfs_param) +{ + int err, i, qcount; + struct bnx2x_sriov *iov; + struct pci_dev *dev = bp->pdev; + + bp->vfdb = NULL; + + /* verify sriov capability is present in configuration space */ + if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV)) { + DP(BNX2X_MSG_IOV, "no sriov - capability not found\n"); + return 0; + } + + /* verify is pf */ + if (IS_VF(bp)) + return 0; + + /* verify chip revision */ + if (CHIP_IS_E1x(bp)) + return 0; + + /* check if SRIOV support is turned off */ + if (!num_vfs_param) + return 0; + + /* SRIOV assumes that num of PF CIDs < BNX2X_FIRST_VF_CID */ + if (BNX2X_L2_MAX_CID(bp) >= BNX2X_FIRST_VF_CID) { + BNX2X_ERR("PF cids %d are overspilling into vf space (starts at %d). Abort SRIOV\n", + BNX2X_L2_MAX_CID(bp), BNX2X_FIRST_VF_CID); + return 0; + } + + /* SRIOV can be enabled only with MSIX */ + if (int_mode_param == BNX2X_INT_MODE_MSI || + int_mode_param == BNX2X_INT_MODE_INTX) { + BNX2X_ERR("Forced MSI/INTx mode is incompatible with SRIOV\n"); + return 0; + } + + /* verify ari is enabled */ + if (!bnx2x_ari_enabled(bp->pdev)) { + BNX2X_ERR("ARI not supported, SRIOV can not be enabled\n"); + return 0; + } + + /* verify igu is in normal mode */ + if (CHIP_INT_MODE_IS_BC(bp)) { + BNX2X_ERR("IGU not normal mode, SRIOV can not be enabled\n"); + return 0; + } + + /* allocate the vfs database */ + bp->vfdb = kzalloc(sizeof(*(bp->vfdb)), GFP_KERNEL); + if (!bp->vfdb) { + BNX2X_ERR("failed to allocate vf database\n"); + err = -ENOMEM; + goto failed; + } + + /* get the sriov info - Linux already collected all the pertinent + * information, however the sriov structure is for the private use + * of the pci module. Also we want this information regardless + * of the hyper-visor. + */ + iov = &(bp->vfdb->sriov); + err = bnx2x_sriov_info(bp, iov); + if (err) + goto failed; + + /* SR-IOV capability was enabled but there are no VFs*/ + if (iov->total == 0) + goto failed; + + /* calcuate the actual number of VFs */ + iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param); + + /* allcate the vf array */ + bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) * + BNX2X_NR_VIRTFN(bp), GFP_KERNEL); + if (!bp->vfdb->vfs) { + BNX2X_ERR("failed to allocate vf array\n"); + err = -ENOMEM; + goto failed; + } + + /* Initial VF init - index and abs_vfid - nr_virtfn must be set */ + for_each_vf(bp, i) { + bnx2x_vf(bp, i, index) = i; + bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i; + bnx2x_vf(bp, i, state) = VF_FREE; + INIT_LIST_HEAD(&bnx2x_vf(bp, i, op_list_head)); + mutex_init(&bnx2x_vf(bp, i, op_mutex)); + bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE; + } + + /* re-read the IGU CAM for VFs - index and abs_vfid must be set */ + bnx2x_get_vf_igu_cam_info(bp); + + /* get the total queue count and allocate the global queue arrays */ + qcount = bnx2x_iov_get_max_queue_count(bp); + + /* allocate the queue arrays for all VFs */ + bp->vfdb->vfqs = kzalloc(qcount * sizeof(struct bnx2x_vf_queue), + GFP_KERNEL); + if (!bp->vfdb->vfqs) { + BNX2X_ERR("failed to allocate vf queue array\n"); + err = -ENOMEM; + goto failed; + } + + return 0; +failed: + DP(BNX2X_MSG_IOV, "Failed err=%d\n", err); + __bnx2x_iov_free_vfdb(bp); + return err; +} + +/* called by bnx2x_init_hw_func, returns the next ilt line */ +int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) +{ + int i; + struct bnx2x_ilt *ilt = BP_ILT(bp); + + if (!IS_SRIOV(bp)) + return line; + + /* set vfs ilt lines */ + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *hw_cxt = BP_VF_CXT_PAGE(bp, i); + + ilt->lines[line+i].page = hw_cxt->addr; + ilt->lines[line+i].page_mapping = hw_cxt->mapping; + ilt->lines[line+i].size = hw_cxt->size; /* doesn't matter */ + } + return line + i; +} + +void bnx2x_iov_remove_one(struct bnx2x *bp) +{ + /* if SRIOV is not enabled there's nothing to do */ + if (!IS_SRIOV(bp)) + return; + + /* free vf database */ + __bnx2x_iov_free_vfdb(bp); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 6d0df33..97275aa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -19,11 +19,231 @@ #ifndef BNX2X_SRIOV_H #define BNX2X_SRIOV_H +/* The bnx2x device structure holds vfdb structure described below. + * The VF array is indexed by the relative vfid. + */ +struct bnx2x_sriov { + u32 first_vf_in_pf; + + /* standard SRIOV capability fields, mostly for debugging */ + int pos; /* capability position */ + int nres; /* number of resources */ + u32 cap; /* SR-IOV Capabilities */ + u16 ctrl; /* SR-IOV Control */ + u16 total; /* total VFs associated with the PF */ + u16 initial; /* initial VFs associated with the PF */ + u16 nr_virtfn; /* number of VFs available */ + u16 offset; /* first VF Routing ID offset */ + u16 stride; /* following VF stride */ + u32 pgsz; /* page size for BAR alignment */ + u8 link; /* Function Dependency Link */ +}; + +/* bars */ +struct bnx2x_vf_bar { + u64 bar; + u32 size; +}; + +/* vf queue (used both for rx or tx) */ +struct bnx2x_vf_queue { + struct eth_context *cxt; + + /* MACs object */ + struct bnx2x_vlan_mac_obj mac_obj; + + /* VLANs object */ + struct bnx2x_vlan_mac_obj vlan_obj; + atomic_t vlan_count; /* 0 means vlan-0 is set ~ untagged */ + + /* Queue Slow-path State object */ + struct bnx2x_queue_sp_obj sp_obj; + + u32 cid; + u16 index; + u16 sb_idx; +}; + +/* struct bnx2x_vfop_qctor_params - prepare queue construction parameters: + * q-init, q-setup and SB index + */ +struct bnx2x_vfop_qctor_params { + struct bnx2x_queue_state_params qstate; + struct bnx2x_queue_setup_params prep_qsetup; +}; + +/* VFOP parameters (one copy per VF) */ +union bnx2x_vfop_params { + struct bnx2x_vlan_mac_ramrod_params vlan_mac; + struct bnx2x_rx_mode_ramrod_params rx_mode; + struct bnx2x_mcast_ramrod_params mcast; + struct bnx2x_config_rss_params rss; + struct bnx2x_vfop_qctor_params qctor; +}; + +/* forward */ +struct bnx2x_virtf; +/* vf context */ +struct bnx2x_virtf { + u16 cfg_flags; +#define VF_CFG_STATS 0x0001 +#define VF_CFG_FW_FC 0x0002 +#define VF_CFG_TPA 0x0004 +#define VF_CFG_INT_SIMD 0x0008 +#define VF_CACHE_LINE 0x0010 + + u8 state; +#define VF_FREE 0 /* VF ready to be acquired holds no resc */ +#define VF_ACQUIRED 1 /* VF aquired, but not initalized */ +#define VF_ENABLED 2 /* VF Enabled */ +#define VF_RESET 3 /* VF FLR'd, pending cleanup */ + + /* non 0 during flr cleanup */ + u8 flr_clnup_stage; +#define VF_FLR_CLN 1 /* reclaim resources and do 'final cleanup' + * sans the end-wait + */ +#define VF_FLR_ACK 2 /* ACK flr notification */ +#define VF_FLR_EPILOG 3 /* wait for VF remnants to dissipate in the HW + * ~ final cleanup' end wait + */ + + /* dma */ + dma_addr_t fw_stat_map; /* valid iff VF_CFG_STATS */ + dma_addr_t spq_map; + dma_addr_t bulletin_map; + + /* Allocated resources counters. Before the VF is acquired, the + * counters hold the following values: + * + * - xxq_count = 0 as the queues memory is not allocated yet. + * + * - sb_count = The number of status blocks configured for this VF in + * the IGU CAM. Initially read during probe. + * + * - xx_rules_count = The number of rules statically and equally + * allocated for each VF, during PF load. + */ + struct vf_pf_resc_request alloc_resc; +#define vf_rxq_count(vf) ((vf)->alloc_resc.num_rxqs) +#define vf_txq_count(vf) ((vf)->alloc_resc.num_txqs) +#define vf_sb_count(vf) ((vf)->alloc_resc.num_sbs) +#define vf_mac_rules_cnt(vf) ((vf)->alloc_resc.num_mac_filters) +#define vf_vlan_rules_cnt(vf) ((vf)->alloc_resc.num_vlan_filters) +#define vf_mc_rules_cnt(vf) ((vf)->alloc_resc.num_mc_filters) + + u8 sb_count; /* actual number of SBs */ + u8 igu_base_id; /* base igu status block id */ + + struct bnx2x_vf_queue *vfqs; +#define bnx2x_vfq(vf, nr, var) ((vf)->vfqs[(nr)].var) + + u8 index; /* index in the vf array */ + u8 abs_vfid; + u8 sp_cl_id; + u32 error; /* 0 means all's-well */ + + /* BDF */ + unsigned int bus; + unsigned int devfn; + + /* bars */ + struct bnx2x_vf_bar bars[PCI_SRIOV_NUM_BARS]; + + /* set-mac ramrod state 1-pending, 0-done */ + unsigned long filter_state; + + /* leading rss client id ~~ the client id of the first rxq, must be + * set for each txq. + */ + int leading_rss; + + /* MCAST object */ + struct bnx2x_mcast_obj mcast_obj; + + /* RSS configuration object */ + struct bnx2x_rss_config_obj rss_conf_obj; + + /* slow-path operations */ + atomic_t op_in_progress; + int op_rc; + bool op_wait_blocking; + struct list_head op_list_head; + union bnx2x_vfop_params op_params; + struct mutex op_mutex; /* one vfop at a time mutex */ + enum channel_tlvs op_current; +}; + +#define BNX2X_NR_VIRTFN(bp) ((bp)->vfdb->sriov.nr_virtfn) + +#define for_each_vf(bp, var) \ + for ((var) = 0; (var) < BNX2X_NR_VIRTFN(bp); (var)++) + struct bnx2x_vf_mbx_msg { union vfpf_tlvs req; union pfvf_tlvs resp; }; +struct bnx2x_vf_mbx { + struct bnx2x_vf_mbx_msg *msg; + dma_addr_t msg_mapping; + + /* VF GPA address */ + u32 vf_addr_lo; + u32 vf_addr_hi; + + struct vfpf_first_tlv first_tlv; /* saved VF request header */ + + u8 flags; +#define VF_MSG_INPROCESS 0x1 /* failsafe - the FW should prevent + * more then one pending msg + */ +}; + +struct hw_dma { + void *addr; + dma_addr_t mapping; + size_t size; +}; + +struct bnx2x_vfdb { +#define BP_VFDB(bp) ((bp)->vfdb) + /* vf array */ + struct bnx2x_virtf *vfs; +#define BP_VF(bp, idx) (&((bp)->vfdb->vfs[(idx)])) +#define bnx2x_vf(bp, idx, var) ((bp)->vfdb->vfs[(idx)].var) + + /* queue array - for all vfs */ + struct bnx2x_vf_queue *vfqs; + + /* vf HW contexts */ + struct hw_dma context[BNX2X_VF_CIDS/ILT_PAGE_CIDS]; +#define BP_VF_CXT_PAGE(bp, i) (&(bp)->vfdb->context[(i)]) + + /* SR-IOV information */ + struct bnx2x_sriov sriov; + struct hw_dma mbx_dma; +#define BP_VF_MBX_DMA(bp) (&((bp)->vfdb->mbx_dma)) + struct bnx2x_vf_mbx mbxs[BNX2X_MAX_NUM_OF_VFS]; +#define BP_VF_MBX(bp, vfid) (&((bp)->vfdb->mbxs[(vfid)])) + + struct hw_dma sp_dma; +#define bnx2x_vf_sp(bp, vf, field) ((bp)->vfdb->sp_dma.addr + \ + (vf)->index * sizeof(struct bnx2x_vf_sp) + \ + offsetof(struct bnx2x_vf_sp, field)) +#define bnx2x_vf_sp_map(bp, vf, field) ((bp)->vfdb->sp_dma.mapping + \ + (vf)->index * sizeof(struct bnx2x_vf_sp) + \ + offsetof(struct bnx2x_vf_sp, field)) + +#define FLRD_VFS_DWORDS (BNX2X_MAX_NUM_OF_VFS / 32) + u32 flrd_vfs[FLRD_VFS_DWORDS]; +}; + +/* global iov routines */ +int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line); +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, int num_vfs_param); +void bnx2x_iov_remove_one(struct bnx2x *bp); +int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, u16 length); void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, -- cgit v0.10.2 From b56e9670ffa4de1a3cf0ca2f89ff5e2e0c31a1f7 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:32 +0000 Subject: bnx2x: Prepare device and initialize VF database At nic load of the PF, if VFs may be present, prepare the device for the VFs. Initialize the VF database in preparation of VF arrival. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 027a4a3..af34ee3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1633,6 +1633,10 @@ struct bnx2x { int dcb_version; /* CAM credit pools */ + + /* used only in sriov */ + struct bnx2x_credit_pool_obj vlans_pool; + struct bnx2x_credit_pool_obj macs_pool; /* RX_MODE object */ @@ -1847,12 +1851,14 @@ int bnx2x_del_all_macs(struct bnx2x *bp, /* Init Function API */ void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p); +u32 bnx2x_get_pretend_reg(struct bnx2x *bp); int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port); int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode); int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); void bnx2x_read_mf_cfg(struct bnx2x *bp); +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val); /* dmae */ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32); @@ -1864,6 +1870,7 @@ u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode); u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, bool with_comp, u8 comp_type); +u8 bnx2x_is_pcie_pending(struct pci_dev *dev); void bnx2x_calc_fc_adv(struct bnx2x *bp); int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, @@ -1888,6 +1895,9 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, return val; } +void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, + bool is_pf); + #define BNX2X_ILT_ZALLOC(x, y, size) \ do { \ x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 18baf75..e8bb146 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -27,8 +27,7 @@ #include "bnx2x_cmn.h" #include "bnx2x_init.h" #include "bnx2x_sp.h" - - +#include "bnx2x_sriov.h" /** * bnx2x_move_fp - move content of the fastpath structure. @@ -2524,7 +2523,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) /* Init per-function objects */ if (IS_PF(bp)) { bnx2x_init_bp_objs(bp); - + bnx2x_iov_nic_init(bp); /* Set AFEX default VLAN tag to an invalid value */ bp->afex_def_vlan_tag = -1; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 6b0add2..9ee67fa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1106,6 +1106,9 @@ static inline void bnx2x_init_bp_objs(struct bnx2x *bp) bnx2x_init_mac_credit_pool(bp, &bp->macs_pool, BP_FUNC(bp), bnx2x_get_path_func_num(bp)); + bnx2x_init_vlan_credit_pool(bp, &bp->vlans_pool, BP_ABS_FUNC(bp)>>1, + bnx2x_get_path_func_num(bp)); + /* RSS configuration object */ bnx2x_init_rss_config_obj(bp, &bp->rss_conf_obj, bp->fp->cl_id, bp->fp->cid, BP_FUNC(bp), BP_FUNC(bp), diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6188ec6..e55de72 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1171,7 +1171,7 @@ static int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, return ret; } -static u8 bnx2x_is_pcie_pending(struct pci_dev *dev) +u8 bnx2x_is_pcie_pending(struct pci_dev *dev) { u16 status; @@ -6269,49 +6269,6 @@ static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); } -static void bnx2x_pretend_func(struct bnx2x *bp, u8 pretend_func_num) -{ - u32 offset = 0; - - if (CHIP_IS_E1(bp)) - return; - if (CHIP_IS_E1H(bp) && (pretend_func_num >= E1H_FUNC_MAX)) - return; - - switch (BP_ABS_FUNC(bp)) { - case 0: - offset = PXP2_REG_PGL_PRETEND_FUNC_F0; - break; - case 1: - offset = PXP2_REG_PGL_PRETEND_FUNC_F1; - break; - case 2: - offset = PXP2_REG_PGL_PRETEND_FUNC_F2; - break; - case 3: - offset = PXP2_REG_PGL_PRETEND_FUNC_F3; - break; - case 4: - offset = PXP2_REG_PGL_PRETEND_FUNC_F4; - break; - case 5: - offset = PXP2_REG_PGL_PRETEND_FUNC_F5; - break; - case 6: - offset = PXP2_REG_PGL_PRETEND_FUNC_F6; - break; - case 7: - offset = PXP2_REG_PGL_PRETEND_FUNC_F7; - break; - default: - return; - } - - REG_WR(bp, offset, pretend_func_num); - REG_RD(bp, offset); - DP(NETIF_MSG_HW, "Pretending to func %d\n", pretend_func_num); -} - void bnx2x_pf_disable(struct bnx2x *bp) { u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); @@ -6568,6 +6525,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON); + bnx2x_iov_init_dmae(bp); + /* clean the DMAE memory */ bp->dmae_ready = 1; bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1); @@ -7053,15 +7012,14 @@ static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr) REG_WR_DMAE(bp, reg, wb_write, 2); } -static void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, - u8 idu_sb_id, bool is_Pf) +void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf) { u32 data, ctl, cnt = 100; u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4; u32 sb_bit = 1 << (idu_sb_id%32); - u32 func_encode = func | (is_Pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT; + u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT; u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id; /* Not supported in BC mode */ @@ -7357,6 +7315,9 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_TM, init_phase); bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + + bnx2x_iov_init_dq(bp); + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); bnx2x_init_block(bp, BLOCK_PRS, init_phase); bnx2x_init_block(bp, BLOCK_TSDM, init_phase); @@ -9459,7 +9420,7 @@ period_task_exit: * Init service functions */ -static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) +u32 bnx2x_get_pretend_reg(struct bnx2x *bp) { u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0; u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 00e4398..cefe448 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -825,6 +825,7 @@ /* [RW 28] The value sent to CM header in the case of CFC load error. */ #define DORQ_REG_ERR_CMHEAD 0x170058 #define DORQ_REG_IF_EN 0x170004 +#define DORQ_REG_MAX_RVFID_SIZE 0x1701ec #define DORQ_REG_MODE_ACT 0x170008 /* [RW 5] The normal mode CID extraction offset. */ #define DORQ_REG_NORM_CID_OFST 0x17002c @@ -847,6 +848,22 @@ writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The read reads this written value. */ #define DORQ_REG_RSP_INIT_CRD 0x170048 +#define DORQ_REG_RSPB_CRD_CNT 0x1700b0 +#define DORQ_REG_VF_NORM_CID_BASE 0x1701a0 +#define DORQ_REG_VF_NORM_CID_OFST 0x1701f4 +#define DORQ_REG_VF_NORM_CID_WND_SIZE 0x1701a4 +#define DORQ_REG_VF_NORM_MAX_CID_COUNT 0x1701e4 +#define DORQ_REG_VF_NORM_VF_BASE 0x1701a8 +/* [RW 10] VF type validation mask value */ +#define DORQ_REG_VF_TYPE_MASK_0 0x170218 +/* [RW 17] VF type validation Min MCID value */ +#define DORQ_REG_VF_TYPE_MAX_MCID_0 0x1702d8 +/* [RW 17] VF type validation Max MCID value */ +#define DORQ_REG_VF_TYPE_MIN_MCID_0 0x170298 +/* [RW 10] VF type validation comp value */ +#define DORQ_REG_VF_TYPE_VALUE_0 0x170258 +#define DORQ_REG_VF_USAGE_CT_LIMIT 0x170340 + /* [RW 4] Initial activity counter value on the load request; when the shortcut is done. */ #define DORQ_REG_SHRT_ACT_CNT 0x170070 @@ -2571,6 +2588,7 @@ current task in process). */ #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c #define PBF_REG_DISABLE_PF 0x1402e8 +#define PBF_REG_DISABLE_VF 0x1402ec /* [RW 18] For port 0: For each client that is subject to WFQ (the * corresponding bit is 1); indicates to which of the credit registers this * client is mapped. For clients which are not credit blocked; their mapping diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index f92bf8b..d833a2d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -19,7 +19,36 @@ */ #include "bnx2x.h" #include "bnx2x_init.h" +#include "bnx2x_cmn.h" #include "bnx2x_sriov.h" + +/* General service functions */ +static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, + u16 pf_id) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); +} + +static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, + u8 enable) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), + enable); +} + int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) { int idx; @@ -272,6 +301,376 @@ failed: __bnx2x_iov_free_vfdb(bp); return err; } +/* VF enable primitives + * when pretend is required the caller is responsible + * for calling pretend prior to calling these routines + */ + +/* called only on E1H or E2. + * When pretending to be PF, the pretend value is the function number 0...7 + * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID + * combination + */ +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) +{ + u32 pretend_reg; + + if (CHIP_IS_E1H(bp) && pretend_func_val > E1H_FUNC_MAX) + return -1; + + /* get my own pretend register */ + pretend_reg = bnx2x_get_pretend_reg(bp); + REG_WR(bp, pretend_reg, pretend_func_val); + REG_RD(bp, pretend_reg); + return 0; +} + +/* internal vf enable - until vf is enabled internally all transactions + * are blocked. this routine should always be called last with pretend. + */ +static void bnx2x_vf_enable_internal(struct bnx2x *bp, u8 enable) +{ + REG_WR(bp, PGLUE_B_REG_INTERNAL_VFID_ENABLE, enable ? 1 : 0); +} + +/* clears vf error in all semi blocks */ +static void bnx2x_vf_semi_clear_err(struct bnx2x *bp, u8 abs_vfid) +{ + REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, abs_vfid); + REG_WR(bp, USEM_REG_VFPF_ERR_NUM, abs_vfid); + REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, abs_vfid); + REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, abs_vfid); +} + +static void bnx2x_vf_pglue_clear_err(struct bnx2x *bp, u8 abs_vfid) +{ + u32 was_err_group = (2 * BP_PATH(bp) + abs_vfid) >> 5; + u32 was_err_reg = 0; + + switch (was_err_group) { + case 0: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR; + break; + case 1: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR; + break; + case 2: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR; + break; + case 3: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR; + break; + } + REG_WR(bp, was_err_reg, 1 << (abs_vfid & 0x1f)); +} + +void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid) +{ + /* set the VF-PF association in the FW */ + storm_memset_vf_to_pf(bp, FW_VF_HANDLE(abs_vfid), BP_FUNC(bp)); + storm_memset_func_en(bp, FW_VF_HANDLE(abs_vfid), 1); + + /* clear vf errors*/ + bnx2x_vf_semi_clear_err(bp, abs_vfid); + bnx2x_vf_pglue_clear_err(bp, abs_vfid); + + /* internal vf-enable - pretend */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, abs_vfid)); + DP(BNX2X_MSG_IOV, "enabling internal access for vf %x\n", abs_vfid); + bnx2x_vf_enable_internal(bp, true); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + +static u8 bnx2x_vf_is_pcie_pending(struct bnx2x *bp, u8 abs_vfid) +{ + struct pci_dev *dev; + struct bnx2x_virtf *vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + + if (!vf) + goto unknown_dev; + + dev = pci_get_bus_and_slot(vf->bus, vf->devfn); + if (dev) + return bnx2x_is_pcie_pending(dev); + +unknown_dev: + BNX2X_ERR("Unknown device\n"); + return false; +} + +int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid) +{ + /* Wait 100ms */ + msleep(100); + + /* Verify no pending pci transactions */ + if (bnx2x_vf_is_pcie_pending(bp, abs_vfid)) + BNX2X_ERR("PCIE Transactions still pending\n"); + + return 0; +} + +/* must be called after the number of PF queues and the number of VFs are + * both known + */ +static void +bnx2x_iov_static_resc(struct bnx2x *bp, struct vf_pf_resc_request *resc) +{ + u16 vlan_count = 0; + + /* will be set only during VF-ACQUIRE */ + resc->num_rxqs = 0; + resc->num_txqs = 0; + + /* no credit calculcis for macs (just yet) */ + resc->num_mac_filters = 1; + + /* divvy up vlan rules */ + vlan_count = bp->vlans_pool.check(&bp->vlans_pool); + vlan_count = 1 << ilog2(vlan_count); + resc->num_vlan_filters = vlan_count / BNX2X_NR_VIRTFN(bp); + + /* no real limitation */ + resc->num_mc_filters = 0; + + /* num_sbs already set */ +} + +/* IOV global initialization routines */ +void bnx2x_iov_init_dq(struct bnx2x *bp) +{ + if (!IS_SRIOV(bp)) + return; + + /* Set the DQ such that the CID reflect the abs_vfid */ + REG_WR(bp, DORQ_REG_VF_NORM_VF_BASE, 0); + REG_WR(bp, DORQ_REG_MAX_RVFID_SIZE, ilog2(BNX2X_MAX_NUM_OF_VFS)); + + /* Set VFs starting CID. If its > 0 the preceding CIDs are belong to + * the PF L2 queues + */ + REG_WR(bp, DORQ_REG_VF_NORM_CID_BASE, BNX2X_FIRST_VF_CID); + + /* The VF window size is the log2 of the max number of CIDs per VF */ + REG_WR(bp, DORQ_REG_VF_NORM_CID_WND_SIZE, BNX2X_VF_CID_WND); + + /* The VF doorbell size 0 - *B, 4 - 128B. We set it here to match + * the Pf doorbell size although the 2 are independent. + */ + REG_WR(bp, DORQ_REG_VF_NORM_CID_OFST, + BNX2X_DB_SHIFT - BNX2X_DB_MIN_SHIFT); + + /* No security checks for now - + * configure single rule (out of 16) mask = 0x1, value = 0x0, + * CID range 0 - 0x1ffff + */ + REG_WR(bp, DORQ_REG_VF_TYPE_MASK_0, 1); + REG_WR(bp, DORQ_REG_VF_TYPE_VALUE_0, 0); + REG_WR(bp, DORQ_REG_VF_TYPE_MIN_MCID_0, 0); + REG_WR(bp, DORQ_REG_VF_TYPE_MAX_MCID_0, 0x1ffff); + + /* set the number of VF alllowed doorbells to the full DQ range */ + REG_WR(bp, DORQ_REG_VF_NORM_MAX_CID_COUNT, 0x20000); + + /* set the VF doorbell threshold */ + REG_WR(bp, DORQ_REG_VF_USAGE_CT_LIMIT, 4); +} + +void bnx2x_iov_init_dmae(struct bnx2x *bp) +{ + DP(BNX2X_MSG_IOV, "SRIOV is %s\n", IS_SRIOV(bp) ? "ON" : "OFF"); + if (!IS_SRIOV(bp)) + return; + + REG_WR(bp, DMAE_REG_BACKWARD_COMP_EN, 0); +} + +static int bnx2x_vf_bus(struct bnx2x *bp, int vfid) +{ + struct pci_dev *dev = bp->pdev; + struct bnx2x_sriov *iov = &bp->vfdb->sriov; + + return dev->bus->number + ((dev->devfn + iov->offset + + iov->stride * vfid) >> 8); +} + +static int bnx2x_vf_devfn(struct bnx2x *bp, int vfid) +{ + struct pci_dev *dev = bp->pdev; + struct bnx2x_sriov *iov = &bp->vfdb->sriov; + + return (dev->devfn + iov->offset + iov->stride * vfid) & 0xff; +} + +static void bnx2x_vf_set_bars(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int i, n; + struct pci_dev *dev = bp->pdev; + struct bnx2x_sriov *iov = &bp->vfdb->sriov; + + for (i = 0, n = 0; i < PCI_SRIOV_NUM_BARS; i += 2, n++) { + u64 start = pci_resource_start(dev, PCI_IOV_RESOURCES + i); + u32 size = pci_resource_len(dev, PCI_IOV_RESOURCES + i); + + do_div(size, iov->total); + vf->bars[n].bar = start + size * vf->abs_vfid; + vf->bars[n].size = size; + } +} + +void bnx2x_iov_free_mem(struct bnx2x *bp) +{ + int i; + + if (!IS_SRIOV(bp)) + return; + + /* free vfs hw contexts */ + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *cxt = &bp->vfdb->context[i]; + BNX2X_PCI_FREE(cxt->addr, cxt->mapping, cxt->size); + } + + BNX2X_PCI_FREE(BP_VFDB(bp)->sp_dma.addr, + BP_VFDB(bp)->sp_dma.mapping, + BP_VFDB(bp)->sp_dma.size); + + BNX2X_PCI_FREE(BP_VF_MBX_DMA(bp)->addr, + BP_VF_MBX_DMA(bp)->mapping, + BP_VF_MBX_DMA(bp)->size); +} + +int bnx2x_iov_alloc_mem(struct bnx2x *bp) +{ + size_t tot_size; + int i, rc = 0; + + if (!IS_SRIOV(bp)) + return rc; + + /* allocate vfs hw contexts */ + tot_size = (BP_VFDB(bp)->sriov.first_vf_in_pf + BNX2X_NR_VIRTFN(bp)) * + BNX2X_CIDS_PER_VF * sizeof(union cdu_context); + + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *cxt = BP_VF_CXT_PAGE(bp, i); + cxt->size = min_t(size_t, tot_size, CDU_ILT_PAGE_SZ); + + if (cxt->size) { + BNX2X_PCI_ALLOC(cxt->addr, &cxt->mapping, cxt->size); + } else { + cxt->addr = NULL; + cxt->mapping = 0; + } + tot_size -= cxt->size; + } + + /* allocate vfs ramrods dma memory - client_init and set_mac */ + tot_size = BNX2X_NR_VIRTFN(bp) * sizeof(struct bnx2x_vf_sp); + BNX2X_PCI_ALLOC(BP_VFDB(bp)->sp_dma.addr, &BP_VFDB(bp)->sp_dma.mapping, + tot_size); + BP_VFDB(bp)->sp_dma.size = tot_size; + + /* allocate mailboxes */ + tot_size = BNX2X_NR_VIRTFN(bp) * MBX_MSG_ALIGNED_SIZE; + BNX2X_PCI_ALLOC(BP_VF_MBX_DMA(bp)->addr, &BP_VF_MBX_DMA(bp)->mapping, + tot_size); + BP_VF_MBX_DMA(bp)->size = tot_size; + + return 0; + +alloc_mem_err: + return -ENOMEM; +} + +/* called by bnx2x_nic_load */ +int bnx2x_iov_nic_init(struct bnx2x *bp) +{ + int vfid, qcount, i; + + if (!IS_SRIOV(bp)) { + DP(BNX2X_MSG_IOV, "vfdb was not allocated\n"); + return 0; + } + + DP(BNX2X_MSG_IOV, "num of vfs: %d\n", (bp)->vfdb->sriov.nr_virtfn); + + /* initialize vf database */ + for_each_vf(bp, vfid) { + struct bnx2x_virtf *vf = BP_VF(bp, vfid); + + int base_vf_cid = (BP_VFDB(bp)->sriov.first_vf_in_pf + vfid) * + BNX2X_CIDS_PER_VF; + + union cdu_context *base_cxt = (union cdu_context *) + BP_VF_CXT_PAGE(bp, base_vf_cid/ILT_PAGE_CIDS)->addr + + (base_vf_cid & (ILT_PAGE_CIDS-1)); + + DP(BNX2X_MSG_IOV, + "VF[%d] Max IGU SBs: %d, base vf cid 0x%x, base cid 0x%x, base cxt %p\n", + vf->abs_vfid, vf_sb_count(vf), base_vf_cid, + BNX2X_FIRST_VF_CID + base_vf_cid, base_cxt); + + /* init statically provisioned resources */ + bnx2x_iov_static_resc(bp, &vf->alloc_resc); + + /* queues are initialized during VF-ACQUIRE */ + + /* reserve the vf vlan credit */ + bp->vlans_pool.get(&bp->vlans_pool, vf_vlan_rules_cnt(vf)); + + vf->filter_state = 0; + vf->sp_cl_id = bnx2x_fp(bp, 0, cl_id); + + /* init mcast object - This object will be re-initialized + * during VF-ACQUIRE with the proper cl_id and cid. + * It needs to be initialized here so that it can be safely + * handled by a subsequent FLR flow. + */ + bnx2x_init_mcast_obj(bp, &vf->mcast_obj, 0xFF, + 0xFF, 0xFF, 0xFF, + bnx2x_vf_sp(bp, vf, mcast_rdata), + bnx2x_vf_sp_map(bp, vf, mcast_rdata), + BNX2X_FILTER_MCAST_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX); + + /* set the mailbox message addresses */ + BP_VF_MBX(bp, vfid)->msg = (struct bnx2x_vf_mbx_msg *) + (((u8 *)BP_VF_MBX_DMA(bp)->addr) + vfid * + MBX_MSG_ALIGNED_SIZE); + + BP_VF_MBX(bp, vfid)->msg_mapping = BP_VF_MBX_DMA(bp)->mapping + + vfid * MBX_MSG_ALIGNED_SIZE; + + /* Enable vf mailbox */ + bnx2x_vf_enable_mbx(bp, vf->abs_vfid); + } + + /* Final VF init */ + qcount = 0; + for_each_vf(bp, i) { + struct bnx2x_virtf *vf = BP_VF(bp, i); + + /* fill in the BDF and bars */ + vf->bus = bnx2x_vf_bus(bp, i); + vf->devfn = bnx2x_vf_devfn(bp, i); + bnx2x_vf_set_bars(bp, vf); + + DP(BNX2X_MSG_IOV, + "VF info[%d]: bus 0x%x, devfn 0x%x, bar0 [0x%x, %d], bar1 [0x%x, %d], bar2 [0x%x, %d]\n", + vf->abs_vfid, vf->bus, vf->devfn, + (unsigned)vf->bars[0].bar, vf->bars[0].size, + (unsigned)vf->bars[1].bar, vf->bars[1].size, + (unsigned)vf->bars[2].bar, vf->bars[2].size); + + /* set local queue arrays */ + vf->vfqs = &bp->vfdb->vfqs[qcount]; + qcount += bnx2x_vf(bp, i, alloc_resc.num_sbs); + } + + return 0; +} /* called by bnx2x_init_hw_func, returns the next ilt line */ int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 97275aa..0e521b0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -179,6 +179,25 @@ struct bnx2x_virtf { #define for_each_vf(bp, var) \ for ((var) = 0; (var) < BNX2X_NR_VIRTFN(bp); (var)++) +#define HW_VF_HANDLE(bp, abs_vfid) \ + (u16)(BP_ABS_FUNC((bp)) | (1<<3) | ((u16)(abs_vfid) << 4)) + +#define FW_PF_MAX_HANDLE 8 + +#define FW_VF_HANDLE(abs_vfid) \ + (abs_vfid + FW_PF_MAX_HANDLE) + +/* VF mail box (aka vf-pf channel) */ + +/* a container for the bi-directional vf<-->pf messages. + * The actual response will be placed according to the offset parameter + * provided in the request + */ + +#define MBX_MSG_ALIGN 8 +#define MBX_MSG_ALIGNED_SIZE (roundup(sizeof(struct bnx2x_vf_mbx_msg), \ + MBX_MSG_ALIGN)) + struct bnx2x_vf_mbx_msg { union vfpf_tlvs req; union pfvf_tlvs resp; @@ -200,6 +219,29 @@ struct bnx2x_vf_mbx { */ }; +struct bnx2x_vf_sp { + union { + struct eth_classify_rules_ramrod_data e2; + } mac_rdata; + + union { + struct eth_classify_rules_ramrod_data e2; + } vlan_rdata; + + union { + struct eth_filter_rules_ramrod_data e2; + } rx_mode_rdata; + + union { + struct eth_multicast_rules_ramrod_data e2; + } mcast_rdata; + + union { + struct client_init_ramrod_data init_data; + struct client_update_ramrod_data update_data; + } q_data; +}; + struct hw_dma { void *addr; dma_addr_t mapping; @@ -239,11 +281,25 @@ struct bnx2x_vfdb { u32 flrd_vfs[FLRD_VFS_DWORDS]; }; +static inline u8 vf_igu_sb(struct bnx2x_virtf *vf, u16 sb_idx) +{ + return vf->igu_base_id + sb_idx; +} + /* global iov routines */ int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line); int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, int num_vfs_param); void bnx2x_iov_remove_one(struct bnx2x *bp); +void bnx2x_iov_free_mem(struct bnx2x *bp); +int bnx2x_iov_alloc_mem(struct bnx2x *bp); +int bnx2x_iov_nic_init(struct bnx2x *bp); +void bnx2x_iov_init_dq(struct bnx2x *bp); +void bnx2x_iov_init_dmae(struct bnx2x *bp); +void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid); int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); +/* VF FLR helpers */ +int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid); +void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid); void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, u16 length); void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 55dd6a9..d1a8644 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -78,3 +78,41 @@ void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list) DP(BNX2X_MSG_IOV, "TLV number %d: type %d, length %d\n", i, tlv->type, tlv->length); } + +/* General service functions */ +static void storm_memset_vf_mbx_ack(struct bnx2x *bp, u16 abs_fid) +{ + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_VF_PF_CHANNEL_STATE_OFFSET(abs_fid); + + REG_WR8(bp, addr, VF_PF_CHANNEL_STATE_READY); +} + +static void storm_memset_vf_mbx_valid(struct bnx2x *bp, u16 abs_fid) +{ + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_VF_PF_CHANNEL_VALID_OFFSET(abs_fid); + + REG_WR8(bp, addr, 1); +} + +static inline void bnx2x_set_vf_mbxs_valid(struct bnx2x *bp) +{ + int i; + + for_each_vf(bp, i) + storm_memset_vf_mbx_valid(bp, bnx2x_vf(bp, i, abs_vfid)); +} + +/* enable vf_pf mailbox (aka vf-pf-chanell) */ +void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid) +{ + bnx2x_vf_flr_clnup_epilog(bp, abs_vfid); + + /* enable the mailbox in the FW */ + storm_memset_vf_mbx_ack(bp, abs_vfid); + storm_memset_vf_mbx_valid(bp, abs_vfid); + + /* enable the VF access to the mailbox */ + bnx2x_vf_enable_access(bp, abs_vfid); +} -- cgit v0.10.2 From fd1fc79dd6deb88ebf38ae9673190da999b3209f Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:33 +0000 Subject: bnx2x: Infrastructure for VF <-> PF request on PF side Support interrupt from device which indicates VF has placed A request on the VF <-> PF channel. The PF driver issues a DMAE to retrieve the request from the VM memory (the Ghost Physical Address of the request is contained in the interrupt. The PF driver uses the GPA in the DMAE request, which is translated by the IOMMU to the correct physical address). The request which arrives is examined to recognize the sending VF. The PF driver allocates a workitem to handle the VF Operation (vfop). Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index af34ee3..5219373 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1379,6 +1379,7 @@ struct bnx2x { int mrrs; struct delayed_work sp_task; + atomic_t interrupt_occurred; struct delayed_work sp_rtnl_task; struct delayed_work period_task; @@ -1870,6 +1871,11 @@ u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode); u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, bool with_comp, u8 comp_type); +void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u8 src_type, u8 dst_type); +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae); +void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae, int msglvl); + u8 bnx2x_is_pcie_pending(struct pci_dev *dev); void bnx2x_calc_fc_adv(struct bnx2x *bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e55de72..e6738f6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -347,6 +347,65 @@ static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr) #define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]" #define DMAE_DP_DST_NONE "dst_addr [none]" +void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae, int msglvl) +{ + u32 src_type = dmae->opcode & DMAE_COMMAND_SRC; + + switch (dmae->opcode & DMAE_COMMAND_DST) { + case DMAE_CMD_DST_PCI: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + case DMAE_CMD_DST_GRC: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst_addr [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + default: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + } +} /* copy command into DMAE command memory and set DMAE command go */ void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx) @@ -397,7 +456,7 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, return opcode; } -static void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, +void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, u8 src_type, u8 dst_type) { @@ -413,9 +472,8 @@ static void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, dmae->comp_val = DMAE_COMP_VAL; } -/* issue a dmae command over the init-channel and wailt for completion */ -static int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, - struct dmae_command *dmae) +/* issue a dmae command over the init-channel and wait for completion */ +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) { u32 *wb_comp = bnx2x_sp(bp, wb_comp); int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; @@ -1600,6 +1658,24 @@ static bool bnx2x_trylock_leader_lock(struct bnx2x *bp) static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err); +/* schedule the sp task and mark that interrupt occurred (runs from ISR) */ +static int bnx2x_schedule_sp_task(struct bnx2x *bp) +{ + /* Set the interrupt occurred bit for the sp-task to recognize it + * must ack the interrupt and transition according to the IGU + * state machine. + */ + atomic_set(&bp->interrupt_occurred, 1); + + /* The sp_task must execute only after this bit + * is set, otherwise we will get out of sync and miss all + * further interrupts. Hence, the barrier. + */ + smp_wmb(); + + /* schedule sp_task to workqueue */ + return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); +} void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) { @@ -1614,6 +1690,13 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) fp->index, cid, command, bp->state, rr_cqe->ramrod_cqe.ramrod_type); + /* If cid is within VF range, replace the slowpath object with the + * one corresponding to this VF + */ + if (cid >= BNX2X_FIRST_VF_CID && + cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS) + bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj); + switch (command) { case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE): DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid); @@ -1665,6 +1748,8 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) #else return; #endif + /* SRIOV: reschedule any 'in_progress' operations */ + bnx2x_iov_sp_event(bp, cid, true); smp_mb__before_atomic_inc(); atomic_inc(&bp->cq_spq_left); @@ -1690,8 +1775,8 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); smp_mb__after_clear_bit(); - /* schedule workqueue to send ack to MCP */ - queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); + /* schedule the sp task as mcp ack is required */ + bnx2x_schedule_sp_task(bp); } return; @@ -1751,7 +1836,11 @@ irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) } if (unlikely(status & 0x1)) { - queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); + + /* schedule sp task to perform default status block work, ack + * attentions and enable interrupts. + */ + bnx2x_schedule_sp_task(bp); status &= ~0x1; if (!status) @@ -4833,7 +4922,7 @@ static void bnx2x_eq_int(struct bnx2x *bp) u8 echo; u32 cid; u8 opcode; - int spqe_cnt = 0; + int rc, spqe_cnt = 0; struct bnx2x_queue_sp_obj *q_obj; struct bnx2x_func_sp_obj *f_obj = &bp->func_obj; struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw; @@ -4864,12 +4953,23 @@ static void bnx2x_eq_int(struct bnx2x *bp) elem = &bp->eq_ring[EQ_DESC(sw_cons)]; + rc = bnx2x_iov_eq_sp_event(bp, elem); + if (!rc) { + DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n", + rc); + goto next_spqe; + } cid = SW_CID(elem->message.data.cfc_del_event.cid); opcode = elem->message.opcode; /* handle eq element */ switch (opcode) { + case EVENT_RING_OPCODE_VF_PF_CHANNEL: + DP(BNX2X_MSG_IOV, "vf pf channel element on eq\n"); + bnx2x_vf_mbx(bp, &elem->message.data.vf_pf_event); + continue; + case EVENT_RING_OPCODE_STAT_QUERY: DP(BNX2X_MSG_SP | BNX2X_MSG_STATS, "got statistics comp event %d\n", @@ -5035,50 +5135,65 @@ next_spqe: static void bnx2x_sp_task(struct work_struct *work) { struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work); - u16 status; - status = bnx2x_update_dsb_idx(bp); -/* if (status == 0) */ -/* BNX2X_ERR("spurious slowpath interrupt!\n"); */ + DP(BNX2X_MSG_SP, "sp task invoked\n"); - DP(BNX2X_MSG_SP, "got a slowpath interrupt (status 0x%x)\n", status); + /* make sure the atomic interupt_occurred has been written */ + smp_rmb(); + if (atomic_read(&bp->interrupt_occurred)) { - /* HW attentions */ - if (status & BNX2X_DEF_SB_ATT_IDX) { - bnx2x_attn_int(bp); - status &= ~BNX2X_DEF_SB_ATT_IDX; - } + /* what work needs to be performed? */ + u16 status = bnx2x_update_dsb_idx(bp); - /* SP events: STAT_QUERY and others */ - if (status & BNX2X_DEF_SB_IDX) { - struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); + DP(BNX2X_MSG_SP, "status %x\n", status); + DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n"); + atomic_set(&bp->interrupt_occurred, 0); + + /* HW attentions */ + if (status & BNX2X_DEF_SB_ATT_IDX) { + bnx2x_attn_int(bp); + status &= ~BNX2X_DEF_SB_ATT_IDX; + } + + /* SP events: STAT_QUERY and others */ + if (status & BNX2X_DEF_SB_IDX) { + struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); if (FCOE_INIT(bp) && - (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { - /* - * Prevent local bottom-halves from running as - * we are going to change the local NAPI list. - */ - local_bh_disable(); - napi_schedule(&bnx2x_fcoe(bp, napi)); - local_bh_enable(); + (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { + /* Prevent local bottom-halves from running as + * we are going to change the local NAPI list. + */ + local_bh_disable(); + napi_schedule(&bnx2x_fcoe(bp, napi)); + local_bh_enable(); + } + + /* Handle EQ completions */ + bnx2x_eq_int(bp); + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, + le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); + + status &= ~BNX2X_DEF_SB_IDX; } - /* Handle EQ completions */ - bnx2x_eq_int(bp); + /* if status is non zero then perhaps something went wrong */ + if (unlikely(status)) + DP(BNX2X_MSG_SP, + "got an unknown interrupt! (status 0x%x)\n", status); - bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, - le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); + /* ack status block only if something was actually handled */ + bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, + le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); - status &= ~BNX2X_DEF_SB_IDX; } - if (unlikely(status)) - DP(BNX2X_MSG_SP, "got an unknown interrupt! (status 0x%x)\n", - status); - - bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, - le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); + /* must be called after the EQ processing (since eq leads to sriov + * ramrod completion flows). + * This flow may have been scheduled by the arrival of a ramrod + * completion, or by the sriov code rescheduling itself. + */ + bnx2x_iov_sp_task(bp); /* afex - poll to check if VIFSET_ACK should be sent to MFW */ if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, @@ -5111,7 +5226,10 @@ irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) rcu_read_unlock(); } - queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); + /* schedule sp task to perform default status block work, ack + * attentions and enable interrupts. + */ + bnx2x_schedule_sp_task(bp); return IRQ_HANDLED; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index d833a2d..9233117 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -518,6 +518,16 @@ static void bnx2x_vf_set_bars(struct bnx2x *bp, struct bnx2x_virtf *vf) } } +void bnx2x_iov_remove_one(struct bnx2x *bp) +{ + /* if SRIOV is not enabled there's nothing to do */ + if (!IS_SRIOV(bp)) + return; + + /* free vf database */ + __bnx2x_iov_free_vfdb(bp); +} + void bnx2x_iov_free_mem(struct bnx2x *bp) { int i; @@ -692,12 +702,241 @@ int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) return line + i; } -void bnx2x_iov_remove_one(struct bnx2x *bp) +static u8 bnx2x_iov_is_vf_cid(struct bnx2x *bp, u16 cid) { - /* if SRIOV is not enabled there's nothing to do */ + return ((cid >= BNX2X_FIRST_VF_CID) && + ((cid - BNX2X_FIRST_VF_CID) < BNX2X_VF_CIDS)); +} + +static +void bnx2x_vf_handle_classification_eqe(struct bnx2x *bp, + struct bnx2x_vf_queue *vfq, + union event_ring_elem *elem) +{ + unsigned long ramrod_flags = 0; + int rc = 0; + + /* Always push next commands out, don't wait here */ + set_bit(RAMROD_CONT, &ramrod_flags); + + switch (elem->message.data.eth_event.echo >> BNX2X_SWCID_SHIFT) { + case BNX2X_FILTER_MAC_PENDING: + rc = vfq->mac_obj.complete(bp, &vfq->mac_obj, elem, + &ramrod_flags); + break; + case BNX2X_FILTER_VLAN_PENDING: + rc = vfq->vlan_obj.complete(bp, &vfq->vlan_obj, elem, + &ramrod_flags); + break; + default: + BNX2X_ERR("Unsupported classification command: %d\n", + elem->message.data.eth_event.echo); + return; + } + if (rc < 0) + BNX2X_ERR("Failed to schedule new commands: %d\n", rc); + else if (rc > 0) + DP(BNX2X_MSG_IOV, "Scheduled next pending commands...\n"); +} + +static +void bnx2x_vf_handle_mcast_eqe(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + int rc; + + rparam.mcast_obj = &vf->mcast_obj; + vf->mcast_obj.raw.clear_pending(&vf->mcast_obj.raw); + + /* If there are pending mcast commands - send them */ + if (vf->mcast_obj.check_pending(&vf->mcast_obj)) { + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + if (rc < 0) + BNX2X_ERR("Failed to send pending mcast commands: %d\n", + rc); + } +} + +static +void bnx2x_vf_handle_filters_eqe(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + smp_mb__before_clear_bit(); + clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state); + smp_mb__after_clear_bit(); +} + +int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem) +{ + struct bnx2x_virtf *vf; + int qidx = 0, abs_vfid; + u8 opcode; + u16 cid = 0xffff; + + if (!IS_SRIOV(bp)) + return 1; + + /* first get the cid - the only events we handle here are cfc-delete + * and set-mac completion + */ + opcode = elem->message.opcode; + + switch (opcode) { + case EVENT_RING_OPCODE_CFC_DEL: + cid = SW_CID((__force __le32) + elem->message.data.cfc_del_event.cid); + DP(BNX2X_MSG_IOV, "checking cfc-del comp cid=%d\n", cid); + break; + case EVENT_RING_OPCODE_CLASSIFICATION_RULES: + case EVENT_RING_OPCODE_MULTICAST_RULES: + case EVENT_RING_OPCODE_FILTERS_RULES: + cid = (elem->message.data.eth_event.echo & + BNX2X_SWCID_MASK); + DP(BNX2X_MSG_IOV, "checking filtering comp cid=%d\n", cid); + break; + case EVENT_RING_OPCODE_VF_FLR: + abs_vfid = elem->message.data.vf_flr_event.vf_id; + DP(BNX2X_MSG_IOV, "Got VF FLR notification abs_vfid=%d\n", + abs_vfid); + goto get_vf; + case EVENT_RING_OPCODE_MALICIOUS_VF: + abs_vfid = elem->message.data.malicious_vf_event.vf_id; + DP(BNX2X_MSG_IOV, "Got VF MALICIOUS notification abs_vfid=%d\n", + abs_vfid); + goto get_vf; + default: + return 1; + } + + /* check if the cid is the VF range */ + if (!bnx2x_iov_is_vf_cid(bp, cid)) { + DP(BNX2X_MSG_IOV, "cid is outside vf range: %d\n", cid); + return 1; + } + + /* extract vf and rxq index from vf_cid - relies on the following: + * 1. vfid on cid reflects the true abs_vfid + * 2. the max number of VFs (per path) is 64 + */ + qidx = cid & ((1 << BNX2X_VF_CID_WND)-1); + abs_vfid = (cid >> BNX2X_VF_CID_WND) & (BNX2X_MAX_NUM_OF_VFS-1); +get_vf: + vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + + if (!vf) { + BNX2X_ERR("EQ completion for unknown VF, cid %d, abs_vfid %d\n", + cid, abs_vfid); + return 0; + } + + switch (opcode) { + case EVENT_RING_OPCODE_CFC_DEL: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] cfc delete ramrod\n", + vf->abs_vfid, qidx); + vfq_get(vf, qidx)->sp_obj.complete_cmd(bp, + &vfq_get(vf, + qidx)->sp_obj, + BNX2X_Q_CMD_CFC_DEL); + break; + case EVENT_RING_OPCODE_CLASSIFICATION_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] set mac/vlan ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_classification_eqe(bp, vfq_get(vf, qidx), elem); + break; + case EVENT_RING_OPCODE_MULTICAST_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] set mcast ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_mcast_eqe(bp, vf); + break; + case EVENT_RING_OPCODE_FILTERS_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] set rx-mode ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_filters_eqe(bp, vf); + break; + case EVENT_RING_OPCODE_VF_FLR: + DP(BNX2X_MSG_IOV, "got VF [%d] FLR notification\n", + vf->abs_vfid); + /* Do nothing for now */ + break; + case EVENT_RING_OPCODE_MALICIOUS_VF: + DP(BNX2X_MSG_IOV, "got VF [%d] MALICIOUS notification\n", + vf->abs_vfid); + /* Do nothing for now */ + break; + } + /* SRIOV: reschedule any 'in_progress' operations */ + bnx2x_iov_sp_event(bp, cid, false); + + return 0; +} + +static struct bnx2x_virtf *bnx2x_vf_by_cid(struct bnx2x *bp, int vf_cid) +{ + /* extract the vf from vf_cid - relies on the following: + * 1. vfid on cid reflects the true abs_vfid + * 2. the max number of VFs (per path) is 64 + */ + int abs_vfid = (vf_cid >> BNX2X_VF_CID_WND) & (BNX2X_MAX_NUM_OF_VFS-1); + return bnx2x_vf_by_abs_fid(bp, abs_vfid); +} + +void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, + struct bnx2x_queue_sp_obj **q_obj) +{ + struct bnx2x_virtf *vf; + if (!IS_SRIOV(bp)) return; - /* free vf database */ - __bnx2x_iov_free_vfdb(bp); + vf = bnx2x_vf_by_cid(bp, vf_cid); + + if (vf) { + /* extract queue index from vf_cid - relies on the following: + * 1. vfid on cid reflects the true abs_vfid + * 2. the max number of VFs (per path) is 64 + */ + int q_index = vf_cid & ((1 << BNX2X_VF_CID_WND)-1); + *q_obj = &bnx2x_vfq(vf, q_index, sp_obj); + } else { + BNX2X_ERR("No vf matching cid %d\n", vf_cid); + } +} + +void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work) +{ + struct bnx2x_virtf *vf; + + /* check if the cid is the VF range */ + if (!IS_SRIOV(bp) || !bnx2x_iov_is_vf_cid(bp, vf_cid)) + return; + + vf = bnx2x_vf_by_cid(bp, vf_cid); + if (vf) { + /* set in_progress flag */ + atomic_set(&vf->op_in_progress, 1); + if (queue_work) + queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); + } +} + +void bnx2x_iov_sp_task(struct bnx2x *bp) +{ + int i; + + if (!IS_SRIOV(bp)) + return; + /* Iterate over all VFs and invoke state transition for VFs with + * 'in-progress' slow-path operations + */ + DP(BNX2X_MSG_IOV, "searching for pending vf operations\n"); + for_each_vf(bp, i) { + struct bnx2x_virtf *vf = BP_VF(bp, i); + + if (!list_empty(&vf->op_list_head) && + atomic_read(&vf->op_in_progress)) { + DP(BNX2X_MSG_IOV, "running pending op for vf %d\n", i); + bnx2x_vfop_cur(bp, vf)->transition(bp, vf); + } + } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 0e521b0..6af7bde 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -83,6 +83,84 @@ union bnx2x_vfop_params { /* forward */ struct bnx2x_virtf; + +/* VFOP definitions */ +typedef void (*vfop_handler_t)(struct bnx2x *bp, struct bnx2x_virtf *vf); + +/* VFOP queue filters command additional arguments */ +struct bnx2x_vfop_filter { + struct list_head link; + int type; +#define BNX2X_VFOP_FILTER_MAC 1 +#define BNX2X_VFOP_FILTER_VLAN 2 + + bool add; + u8 *mac; + u16 vid; +}; + +struct bnx2x_vfop_filters { + int add_cnt; + struct list_head head; + struct bnx2x_vfop_filter filters[]; +}; + +/* transient list allocated, built and saved until its + * passed to the SP-VERBs layer. + */ +struct bnx2x_vfop_args_mcast { + int mc_num; + struct bnx2x_mcast_list_elem *mc; +}; + +struct bnx2x_vfop_args_qctor { + int qid; + u16 sb_idx; +}; + +struct bnx2x_vfop_args_qdtor { + int qid; + struct eth_context *cxt; +}; + +struct bnx2x_vfop_args_defvlan { + int qid; + bool enable; + u16 vid; + u8 prio; +}; + +struct bnx2x_vfop_args_qx { + int qid; + bool en_add; +}; + +struct bnx2x_vfop_args_filters { + struct bnx2x_vfop_filters *multi_filter; + atomic_t *credit; /* non NULL means 'don't consume credit' */ +}; + +union bnx2x_vfop_args { + struct bnx2x_vfop_args_mcast mc_list; + struct bnx2x_vfop_args_qctor qctor; + struct bnx2x_vfop_args_qdtor qdtor; + struct bnx2x_vfop_args_defvlan defvlan; + struct bnx2x_vfop_args_qx qx; + struct bnx2x_vfop_args_filters filters; +}; + +struct bnx2x_vfop { + struct list_head link; + int rc; /* return code */ + int state; /* next state */ + union bnx2x_vfop_args args; /* extra arguments */ + union bnx2x_vfop_params *op_p; /* ramrod params */ + + /* state machine callbacks */ + vfop_handler_t transition; + vfop_handler_t done; +}; + /* vf context */ struct bnx2x_virtf { u16 cfg_flags; @@ -281,6 +359,12 @@ struct bnx2x_vfdb { u32 flrd_vfs[FLRD_VFS_DWORDS]; }; +/* queue access */ +static inline struct bnx2x_vf_queue *vfq_get(struct bnx2x_virtf *vf, u8 index) +{ + return &(vf->vfqs[index]); +} + static inline u8 vf_igu_sb(struct bnx2x_virtf *vf, u16 sb_idx) { return vf->igu_base_id + sb_idx; @@ -295,7 +379,22 @@ int bnx2x_iov_alloc_mem(struct bnx2x *bp); int bnx2x_iov_nic_init(struct bnx2x *bp); void bnx2x_iov_init_dq(struct bnx2x *bp); void bnx2x_iov_init_dmae(struct bnx2x *bp); +void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, + struct bnx2x_queue_sp_obj **q_obj); +void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work); +int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem); +void bnx2x_iov_sp_task(struct bnx2x *bp); +/* global vf mailbox routines */ +void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event); void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid); +static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + WARN(!mutex_is_locked(&vf->op_mutex), "about to access vf op linked list but mutex was not locked!"); + WARN_ON(list_empty(&vf->op_list_head)); + return list_first_entry(&vf->op_list_head, struct bnx2x_vfop, link); +} + int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); /* VF FLR helpers */ int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid); @@ -305,4 +404,7 @@ void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, u16 type, u16 length); void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list); + +bool bnx2x_tlv_supported(u16 tlvtype); + #endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index d1a8644..6e5e063 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -79,6 +79,24 @@ void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list) tlv->type, tlv->length); } +/* test whether we support a tlv type */ +bool bnx2x_tlv_supported(u16 tlvtype) +{ + return CHANNEL_TLV_NONE < tlvtype && tlvtype < CHANNEL_TLV_MAX; +} + +static inline int bnx2x_pfvf_status_codes(int rc) +{ + switch (rc) { + case 0: + return PFVF_STATUS_SUCCESS; + case -ENOMEM: + return PFVF_STATUS_NO_RESOURCE; + default: + return PFVF_STATUS_FAILURE; + } +} + /* General service functions */ static void storm_memset_vf_mbx_ack(struct bnx2x *bp, u16 abs_fid) { @@ -116,3 +134,139 @@ void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid) /* enable the VF access to the mailbox */ bnx2x_vf_enable_access(bp, abs_vfid); } + +/* this works only on !E1h */ +static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf, + dma_addr_t pf_addr, u8 vfid, u32 vf_addr_hi, + u32 vf_addr_lo, u32 len32) +{ + struct dmae_command dmae; + + if (CHIP_IS_E1x(bp)) { + BNX2X_ERR("Chip revision does not support VFs\n"); + return DMAE_NOT_RDY; + } + + if (!bp->dmae_ready) { + BNX2X_ERR("DMAE is not ready, can not copy\n"); + return DMAE_NOT_RDY; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_PCI); + + if (from_vf) { + dmae.opcode_iov = (vfid << DMAE_COMMAND_SRC_VFID_SHIFT) | + (DMAE_SRC_VF << DMAE_COMMAND_SRC_VFPF_SHIFT) | + (DMAE_DST_PF << DMAE_COMMAND_DST_VFPF_SHIFT); + + dmae.opcode |= (DMAE_C_DST << DMAE_COMMAND_C_FUNC_SHIFT); + + dmae.src_addr_lo = vf_addr_lo; + dmae.src_addr_hi = vf_addr_hi; + dmae.dst_addr_lo = U64_LO(pf_addr); + dmae.dst_addr_hi = U64_HI(pf_addr); + } else { + dmae.opcode_iov = (vfid << DMAE_COMMAND_DST_VFID_SHIFT) | + (DMAE_DST_VF << DMAE_COMMAND_DST_VFPF_SHIFT) | + (DMAE_SRC_PF << DMAE_COMMAND_SRC_VFPF_SHIFT); + + dmae.opcode |= (DMAE_C_SRC << DMAE_COMMAND_C_FUNC_SHIFT); + + dmae.src_addr_lo = U64_LO(pf_addr); + dmae.src_addr_hi = U64_HI(pf_addr); + dmae.dst_addr_lo = vf_addr_lo; + dmae.dst_addr_hi = vf_addr_hi; + } + dmae.len = len32; + bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_DMAE); + + /* issue the command and wait for completion */ + return bnx2x_issue_dmae_with_comp(bp, &dmae); +} + +/* dispatch request */ +static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int i; + + /* check if tlv type is known */ + if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) { + /* switch on the opcode */ + switch (mbx->first_tlv.tl.type) { + } + } else { + /* unknown TLV - this may belong to a VF driver from the future + * - a version written after this PF driver was written, which + * supports features unknown as of yet. Too bad since we don't + * support them. Or this may be because someone wrote a crappy + * VF driver and is sending garbage over the channel. + */ + BNX2X_ERR("unknown TLV. type %d length %d. first 20 bytes of mailbox buffer:\n", + mbx->first_tlv.tl.type, mbx->first_tlv.tl.length); + for (i = 0; i < 20; i++) + DP_CONT(BNX2X_MSG_IOV, "%x ", + mbx->msg->req.tlv_buf_size.tlv_buffer[i]); + } +} + +/* handle new vf-pf message */ +void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event) +{ + struct bnx2x_virtf *vf; + struct bnx2x_vf_mbx *mbx; + u8 vf_idx; + int rc; + + DP(BNX2X_MSG_IOV, + "vf pf event received: vfid %d, address_hi %x, address lo %x", + vfpf_event->vf_id, vfpf_event->msg_addr_hi, vfpf_event->msg_addr_lo); + /* Sanity checks consider removing later */ + + /* check if the vf_id is valid */ + if (vfpf_event->vf_id - BP_VFDB(bp)->sriov.first_vf_in_pf > + BNX2X_NR_VIRTFN(bp)) { + BNX2X_ERR("Illegal vf_id %d max allowed: %d\n", + vfpf_event->vf_id, BNX2X_NR_VIRTFN(bp)); + goto mbx_done; + } + vf_idx = bnx2x_vf_idx_by_abs_fid(bp, vfpf_event->vf_id); + mbx = BP_VF_MBX(bp, vf_idx); + + /* verify an event is not currently being processed - + * debug failsafe only + */ + if (mbx->flags & VF_MSG_INPROCESS) { + BNX2X_ERR("Previous message is still being processed, vf_id %d\n", + vfpf_event->vf_id); + goto mbx_done; + } + vf = BP_VF(bp, vf_idx); + + /* save the VF message address */ + mbx->vf_addr_hi = vfpf_event->msg_addr_hi; + mbx->vf_addr_lo = vfpf_event->msg_addr_lo; + DP(BNX2X_MSG_IOV, "mailbox vf address hi 0x%x, lo 0x%x, offset 0x%x\n", + mbx->vf_addr_hi, mbx->vf_addr_lo, mbx->first_tlv.resp_msg_offset); + + /* dmae to get the VF request */ + rc = bnx2x_copy32_vf_dmae(bp, true, mbx->msg_mapping, vf->abs_vfid, + mbx->vf_addr_hi, mbx->vf_addr_lo, + sizeof(union vfpf_tlvs)/4); + if (rc) { + BNX2X_ERR("Failed to copy request VF %d\n", vf->abs_vfid); + goto mbx_error; + } + + /* process the VF message header */ + mbx->first_tlv = mbx->msg->req.first_tlv; + + /* dispatch the request (will prepare the response) */ + bnx2x_vf_mbx_request(bp, vf, mbx); + goto mbx_done; + +mbx_error: +mbx_done: + return; +} -- cgit v0.10.2 From 8ca5e17e58c953b9a9dbd4974c554b25c6d70b1a Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:34 +0000 Subject: bnx2x: Support of PF driver of a VF acquire request When a VF is probed by the VF driver, the VF driver sends an 'acquire' request over the VF <-> PF channel for the resources it needs to operate (interrupts, queues, etc). The PF driver either ratifies the request and allocates the resources, responds with the maximum values it will allow the VF to acquire, or fails the request entirely if there is a problem. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e8bb146..022c491 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -85,6 +85,34 @@ static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to) to_fp->txdata_ptr[0] = &bp->bnx2x_txq[new_txdata_index]; } +/** + * bnx2x_fill_fw_str - Fill buffer with FW version string. + * + * @bp: driver handle + * @buf: character buffer to fill with the fw name + * @buf_len: length of the above buffer + * + */ +void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len) +{ + if (IS_PF(bp)) { + u8 phy_fw_ver[PHY_FW_VER_LEN]; + + phy_fw_ver[0] = '\0'; + bnx2x_get_ext_phy_fw_version(&bp->link_params, + phy_fw_ver, PHY_FW_VER_LEN); + strlcpy(buf, bp->fw_ver, buf_len); + snprintf(buf + strlen(bp->fw_ver), 32 - strlen(bp->fw_ver), + "bc %d.%d.%d%s%s", + (bp->common.bc_ver & 0xff0000) >> 16, + (bp->common.bc_ver & 0xff00) >> 8, + (bp->common.bc_ver & 0xff), + ((phy_fw_ver[0] != '\0') ? " phy " : ""), phy_fw_ver); + } else { + strlcpy(buf, bp->acquire_resp.pfdev_info.fw_ver, buf_len); + } +} + int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */ /* free skb in the packet ring at pos idx diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 9ee67fa..cd1eaff 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1401,4 +1401,13 @@ static inline bool bnx2x_is_valid_ether_addr(struct bnx2x *bp, u8 *addr) return false; } +/** + * bnx2x_fill_fw_str - Fill buffer with FW version string. + * + * @bp: driver handle + * @buf: character buffer to fill with the fw name + * @buf_len: length of the above buffer + * + */ +void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len); #endif /* BNX2X_CMN_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index b7c82f9..292634f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -817,21 +817,12 @@ static void bnx2x_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct bnx2x *bp = netdev_priv(dev); - u8 phy_fw_ver[PHY_FW_VER_LEN]; strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); - phy_fw_ver[0] = '\0'; - bnx2x_get_ext_phy_fw_version(&bp->link_params, - phy_fw_ver, PHY_FW_VER_LEN); - strlcpy(info->fw_version, bp->fw_ver, sizeof(info->fw_version)); - snprintf(info->fw_version + strlen(bp->fw_ver), 32 - strlen(bp->fw_ver), - "bc %d.%d.%d%s%s", - (bp->common.bc_ver & 0xff0000) >> 16, - (bp->common.bc_ver & 0xff00) >> 8, - (bp->common.bc_ver & 0xff), - ((phy_fw_ver[0] != '\0') ? " phy " : ""), phy_fw_ver); + bnx2x_fill_fw_str(bp, info->fw_version, sizeof(info->fw_version)); + strlcpy(info->bus_info, pci_name(bp->pdev), sizeof(info->bus_info)); info->n_stats = BNX2X_NUM_STATS; info->testinfo_len = BNX2X_NUM_TESTS(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 9233117..de42f66 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -593,6 +593,63 @@ alloc_mem_err: return -ENOMEM; } +static void bnx2x_vfq_init(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q) +{ + u8 cl_id = vfq_cl_id(vf, q); + u8 func_id = FW_VF_HANDLE(vf->abs_vfid); + unsigned long q_type = 0; + + set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + + /* Queue State object */ + bnx2x_init_queue_obj(bp, &q->sp_obj, + cl_id, &q->cid, 1, func_id, + bnx2x_vf_sp(bp, vf, q_data), + bnx2x_vf_sp_map(bp, vf, q_data), + q_type); + + DP(BNX2X_MSG_IOV, + "initialized vf %d's queue object. func id set to %d\n", + vf->abs_vfid, q->sp_obj.func_id); + + /* mac/vlan objects are per queue, but only those + * that belong to the leading queue are initialized + */ + if (vfq_is_leading(q)) { + /* mac */ + bnx2x_init_mac_obj(bp, &q->mac_obj, + cl_id, q->cid, func_id, + bnx2x_vf_sp(bp, vf, mac_rdata), + bnx2x_vf_sp_map(bp, vf, mac_rdata), + BNX2X_FILTER_MAC_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX, + &bp->macs_pool); + /* vlan */ + bnx2x_init_vlan_obj(bp, &q->vlan_obj, + cl_id, q->cid, func_id, + bnx2x_vf_sp(bp, vf, vlan_rdata), + bnx2x_vf_sp_map(bp, vf, vlan_rdata), + BNX2X_FILTER_VLAN_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX, + &bp->vlans_pool); + + /* mcast */ + bnx2x_init_mcast_obj(bp, &vf->mcast_obj, cl_id, + q->cid, func_id, func_id, + bnx2x_vf_sp(bp, vf, mcast_rdata), + bnx2x_vf_sp_map(bp, vf, mcast_rdata), + BNX2X_FILTER_MCAST_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX); + + vf->leading_rss = cl_id; + } +} + /* called by bnx2x_nic_load */ int bnx2x_iov_nic_init(struct bnx2x *bp) { @@ -940,3 +997,145 @@ void bnx2x_iov_sp_task(struct bnx2x *bp) } } } + +u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + return min_t(u8, min_t(u8, vf_sb_count(vf), BNX2X_CIDS_PER_VF), + BNX2X_VF_MAX_QUEUES); +} + +static +int bnx2x_vf_chk_avail_resc(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vf_pf_resc_request *req_resc) +{ + u8 rxq_cnt = vf_rxq_count(vf) ? : bnx2x_vf_max_queue_cnt(bp, vf); + u8 txq_cnt = vf_txq_count(vf) ? : bnx2x_vf_max_queue_cnt(bp, vf); + + return ((req_resc->num_rxqs <= rxq_cnt) && + (req_resc->num_txqs <= txq_cnt) && + (req_resc->num_sbs <= vf_sb_count(vf)) && + (req_resc->num_mac_filters <= vf_mac_rules_cnt(vf)) && + (req_resc->num_vlan_filters <= vf_vlan_rules_cnt(vf))); +} + +/* CORE VF API */ +int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vf_pf_resc_request *resc) +{ + int base_vf_cid = (BP_VFDB(bp)->sriov.first_vf_in_pf + vf->index) * + BNX2X_CIDS_PER_VF; + + union cdu_context *base_cxt = (union cdu_context *) + BP_VF_CXT_PAGE(bp, base_vf_cid/ILT_PAGE_CIDS)->addr + + (base_vf_cid & (ILT_PAGE_CIDS-1)); + int i; + + /* if state is 'acquired' the VF was not released or FLR'd, in + * this case the returned resources match the acquired already + * acquired resources. Verify that the requested numbers do + * not exceed the already acquired numbers. + */ + if (vf->state == VF_ACQUIRED) { + DP(BNX2X_MSG_IOV, "VF[%d] Trying to re-acquire resources (VF was not released or FLR'd)\n", + vf->abs_vfid); + + if (!bnx2x_vf_chk_avail_resc(bp, vf, resc)) { + BNX2X_ERR("VF[%d] When re-acquiring resources, requested numbers must be <= then previously acquired numbers\n", + vf->abs_vfid); + return -EINVAL; + } + return 0; + } + + /* Otherwise vf state must be 'free' or 'reset' */ + if (vf->state != VF_FREE && vf->state != VF_RESET) { + BNX2X_ERR("VF[%d] Can not acquire a VF with state %d\n", + vf->abs_vfid, vf->state); + return -EINVAL; + } + + /* static allocation: + * the global maximum number are fixed per VF. fail the request if + * requested number exceed these globals + */ + if (!bnx2x_vf_chk_avail_resc(bp, vf, resc)) { + DP(BNX2X_MSG_IOV, + "cannot fulfill vf resource request. Placing maximal available values in response\n"); + /* set the max resource in the vf */ + return -ENOMEM; + } + + /* Set resources counters - 0 request means max available */ + vf_sb_count(vf) = resc->num_sbs; + vf_rxq_count(vf) = resc->num_rxqs ? : bnx2x_vf_max_queue_cnt(bp, vf); + vf_txq_count(vf) = resc->num_txqs ? : bnx2x_vf_max_queue_cnt(bp, vf); + if (resc->num_mac_filters) + vf_mac_rules_cnt(vf) = resc->num_mac_filters; + if (resc->num_vlan_filters) + vf_vlan_rules_cnt(vf) = resc->num_vlan_filters; + + DP(BNX2X_MSG_IOV, + "Fulfilling vf request: sb count %d, tx_count %d, rx_count %d, mac_rules_count %d, vlan_rules_count %d\n", + vf_sb_count(vf), vf_rxq_count(vf), + vf_txq_count(vf), vf_mac_rules_cnt(vf), + vf_vlan_rules_cnt(vf)); + + /* Initialize the queues */ + if (!vf->vfqs) { + DP(BNX2X_MSG_IOV, "vf->vfqs was not allocated\n"); + return -EINVAL; + } + + for_each_vfq(vf, i) { + struct bnx2x_vf_queue *q = vfq_get(vf, i); + + if (!q) { + DP(BNX2X_MSG_IOV, "q number %d was not allocated\n", i); + return -EINVAL; + } + + q->index = i; + q->cxt = &((base_cxt + i)->eth); + q->cid = BNX2X_FIRST_VF_CID + base_vf_cid + i; + + DP(BNX2X_MSG_IOV, "VFQ[%d:%d]: index %d, cid 0x%x, cxt %p\n", + vf->abs_vfid, i, q->index, q->cid, q->cxt); + + /* init SP objects */ + bnx2x_vfq_init(bp, vf, q); + } + vf->state = VF_ACQUIRED; + return 0; +} + +void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs tlv) +{ + /* lock the channel */ + mutex_lock(&vf->op_mutex); + + /* record the locking op */ + vf->op_current = tlv; + + /* log the lock */ + DP(BNX2X_MSG_IOV, "VF[%d]: vf pf channel locked by %d\n", + vf->abs_vfid, tlv); +} + +void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs expected_tlv) +{ + WARN(expected_tlv != vf->op_current, + "lock mismatch: expected %d found %d", expected_tlv, + vf->op_current); + + /* lock the channel */ + mutex_unlock(&vf->op_mutex); + + /* log the unlock */ + DP(BNX2X_MSG_IOV, "VF[%d]: vf pf channel unlocked by %d\n", + vf->abs_vfid, vf->op_current); + + /* record the locking op */ + vf->op_current = CHANNEL_TLV_NONE; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 6af7bde..5248ebe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -19,9 +19,13 @@ #ifndef BNX2X_SRIOV_H #define BNX2X_SRIOV_H +#include "bnx2x_vfpf.h" +#include "bnx2x_cmn.h" + /* The bnx2x device structure holds vfdb structure described below. * The VF array is indexed by the relative vfid. */ +#define BNX2X_VF_MAX_QUEUES 16 struct bnx2x_sriov { u32 first_vf_in_pf; @@ -257,6 +261,12 @@ struct bnx2x_virtf { #define for_each_vf(bp, var) \ for ((var) = 0; (var) < BNX2X_NR_VIRTFN(bp); (var)++) +#define for_each_vfq(vf, var) \ + for ((var) = 0; (var) < vf_rxq_count(vf); (var)++) + +#define for_each_vf_sb(vf, var) \ + for ((var) = 0; (var) < vf_sb_count(vf); (var)++) + #define HW_VF_HANDLE(bp, abs_vfid) \ (u16)(BP_ABS_FUNC((bp)) | (1<<3) | ((u16)(abs_vfid) << 4)) @@ -265,6 +275,13 @@ struct bnx2x_virtf { #define FW_VF_HANDLE(abs_vfid) \ (abs_vfid + FW_PF_MAX_HANDLE) +/* locking and unlocking the channel mutex */ +void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs tlv); + +void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs expected_tlv); + /* VF mail box (aka vf-pf channel) */ /* a container for the bi-directional vf<-->pf messages. @@ -365,11 +382,32 @@ static inline struct bnx2x_vf_queue *vfq_get(struct bnx2x_virtf *vf, u8 index) return &(vf->vfqs[index]); } +static inline bool vfq_is_leading(struct bnx2x_vf_queue *vfq) +{ + return (vfq->index == 0); +} + +/* FW ids */ static inline u8 vf_igu_sb(struct bnx2x_virtf *vf, u16 sb_idx) { return vf->igu_base_id + sb_idx; } +static inline u8 vf_hc_qzone(struct bnx2x_virtf *vf, u16 sb_idx) +{ + return vf_igu_sb(vf, sb_idx); +} + +static u8 vfq_cl_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) +{ + return vf->igu_base_id + q->index; +} + +static inline u8 vfq_qzone_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) +{ + return vfq_cl_id(vf, q); +} + /* global iov routines */ int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line); int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, int num_vfs_param); @@ -387,6 +425,10 @@ void bnx2x_iov_sp_task(struct bnx2x *bp); /* global vf mailbox routines */ void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event); void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid); +/* acquire */ +int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vf_pf_resc_request *resc); + static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp, struct bnx2x_virtf *vf) { @@ -396,6 +438,7 @@ static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp, } int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); +u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); /* VF FLR helpers */ int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid); void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 6e5e063..3b6b577 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -185,6 +185,176 @@ static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf, return bnx2x_issue_dmae_with_comp(bp, &dmae); } +static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vf_mbx *mbx = BP_VF_MBX(bp, vf->index); + u64 vf_addr; + dma_addr_t pf_addr; + u16 length, type; + int rc; + struct pfvf_general_resp_tlv *resp = &mbx->msg->resp.general_resp; + + /* prepare response */ + type = mbx->first_tlv.tl.type; + length = type == CHANNEL_TLV_ACQUIRE ? + sizeof(struct pfvf_acquire_resp_tlv) : + sizeof(struct pfvf_general_resp_tlv); + bnx2x_add_tlv(bp, resp, 0, type, length); + resp->hdr.status = bnx2x_pfvf_status_codes(vf->op_rc); + bnx2x_add_tlv(bp, resp, length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + bnx2x_dp_tlv_list(bp, resp); + DP(BNX2X_MSG_IOV, "mailbox vf address hi 0x%x, lo 0x%x, offset 0x%x\n", + mbx->vf_addr_hi, mbx->vf_addr_lo, mbx->first_tlv.resp_msg_offset); + + /* send response */ + vf_addr = HILO_U64(mbx->vf_addr_hi, mbx->vf_addr_lo) + + mbx->first_tlv.resp_msg_offset; + pf_addr = mbx->msg_mapping + + offsetof(struct bnx2x_vf_mbx_msg, resp); + + /* copy the response body, if there is one, before the header, as the vf + * is sensitive to the header being written + */ + if (resp->hdr.tl.length > sizeof(u64)) { + length = resp->hdr.tl.length - sizeof(u64); + vf_addr += sizeof(u64); + pf_addr += sizeof(u64); + rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, vf->abs_vfid, + U64_HI(vf_addr), + U64_LO(vf_addr), + length/4); + if (rc) { + BNX2X_ERR("Failed to copy response body to VF %d\n", + vf->abs_vfid); + return; + } + vf_addr -= sizeof(u64); + pf_addr -= sizeof(u64); + } + + /* ack the FW */ + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + mmiowb(); + + /* initiate dmae to send the response */ + mbx->flags &= ~VF_MSG_INPROCESS; + + /* copy the response header including status-done field, + * must be last dmae, must be after FW is acked + */ + rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, vf->abs_vfid, + U64_HI(vf_addr), + U64_LO(vf_addr), + sizeof(u64)/4); + + /* unlock channel mutex */ + bnx2x_unlock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); + + if (rc) { + BNX2X_ERR("Failed to copy response status to VF %d\n", + vf->abs_vfid); + } + return; +} + +static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx, int vfop_status) +{ + int i; + struct pfvf_acquire_resp_tlv *resp = &mbx->msg->resp.acquire_resp; + struct pf_vf_resc *resc = &resp->resc; + u8 status = bnx2x_pfvf_status_codes(vfop_status); + + memset(resp, 0, sizeof(*resp)); + + /* fill in pfdev info */ + resp->pfdev_info.chip_num = bp->common.chip_id; + resp->pfdev_info.db_size = (1 << BNX2X_DB_SHIFT); + resp->pfdev_info.indices_per_sb = HC_SB_MAX_INDICES_E2; + resp->pfdev_info.pf_cap = (PFVF_CAP_RSS | + /* PFVF_CAP_DHC |*/ PFVF_CAP_TPA); + bnx2x_fill_fw_str(bp, resp->pfdev_info.fw_ver, + sizeof(resp->pfdev_info.fw_ver)); + + if (status == PFVF_STATUS_NO_RESOURCE || + status == PFVF_STATUS_SUCCESS) { + /* set resources numbers, if status equals NO_RESOURCE these + * are max possible numbers + */ + resc->num_rxqs = vf_rxq_count(vf) ? : + bnx2x_vf_max_queue_cnt(bp, vf); + resc->num_txqs = vf_txq_count(vf) ? : + bnx2x_vf_max_queue_cnt(bp, vf); + resc->num_sbs = vf_sb_count(vf); + resc->num_mac_filters = vf_mac_rules_cnt(vf); + resc->num_vlan_filters = vf_vlan_rules_cnt(vf); + resc->num_mc_filters = 0; + + if (status == PFVF_STATUS_SUCCESS) { + for_each_vfq(vf, i) + resc->hw_qid[i] = + vfq_qzone_id(vf, vfq_get(vf, i)); + + for_each_vf_sb(vf, i) { + resc->hw_sbs[i].hw_sb_id = vf_igu_sb(vf, i); + resc->hw_sbs[i].sb_qid = vf_hc_qzone(vf, i); + } + } + } + + DP(BNX2X_MSG_IOV, "VF[%d] ACQUIRE_RESPONSE: pfdev_info- chip_num=0x%x, db_size=%d, idx_per_sb=%d, pf_cap=0x%x\n" + "resources- n_rxq-%d, n_txq-%d, n_sbs-%d, n_macs-%d, n_vlans-%d, n_mcs-%d, fw_ver: '%s'\n", + vf->abs_vfid, + resp->pfdev_info.chip_num, + resp->pfdev_info.db_size, + resp->pfdev_info.indices_per_sb, + resp->pfdev_info.pf_cap, + resc->num_rxqs, + resc->num_txqs, + resc->num_sbs, + resc->num_mac_filters, + resc->num_vlan_filters, + resc->num_mc_filters, + resp->pfdev_info.fw_ver); + + DP_CONT(BNX2X_MSG_IOV, "hw_qids- [ "); + for (i = 0; i < vf_rxq_count(vf); i++) + DP_CONT(BNX2X_MSG_IOV, "%d ", resc->hw_qid[i]); + DP_CONT(BNX2X_MSG_IOV, "], sb_info- [ "); + for (i = 0; i < vf_sb_count(vf); i++) + DP_CONT(BNX2X_MSG_IOV, "%d:%d ", + resc->hw_sbs[i].hw_sb_id, + resc->hw_sbs[i].sb_qid); + DP_CONT(BNX2X_MSG_IOV, "]\n"); + + /* send the response */ + vf->op_rc = vfop_status; + bnx2x_vf_mbx_resp(bp, vf); +} + +static void bnx2x_vf_mbx_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int rc; + struct vfpf_acquire_tlv *acquire = &mbx->msg->req.acquire; + + /* log vfdef info */ + DP(BNX2X_MSG_IOV, + "VF[%d] ACQUIRE: vfdev_info- vf_id %d, vf_os %d resources- n_rxq-%d, n_txq-%d, n_sbs-%d, n_macs-%d, n_vlans-%d, n_mcs-%d\n", + vf->abs_vfid, acquire->vfdev_info.vf_id, acquire->vfdev_info.vf_os, + acquire->resc_request.num_rxqs, acquire->resc_request.num_txqs, + acquire->resc_request.num_sbs, acquire->resc_request.num_mac_filters, + acquire->resc_request.num_vlan_filters, + acquire->resc_request.num_mc_filters); + + /* acquire the resources */ + rc = bnx2x_vf_acquire(bp, vf, &acquire->resc_request); + + /* response */ + bnx2x_vf_mbx_acquire_resp(bp, vf, mbx, rc); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -193,8 +363,16 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, /* check if tlv type is known */ if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) { + /* Lock the per vf op mutex and note the locker's identity. + * The unlock will take place in mbx response. + */ + bnx2x_lock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); + /* switch on the opcode */ switch (mbx->first_tlv.tl.type) { + case CHANNEL_TLV_ACQUIRE: + bnx2x_vf_mbx_acquire(bp, vf, mbx); + break; } } else { /* unknown TLV - this may belong to a VF driver from the future @@ -208,6 +386,23 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, for (i = 0; i < 20; i++) DP_CONT(BNX2X_MSG_IOV, "%x ", mbx->msg->req.tlv_buf_size.tlv_buffer[i]); + + /* test whether we can respond to the VF (do we have an address + * for it?) + */ + if (vf->state == VF_ACQUIRED) { + /* mbx_resp uses the op_rc of the VF */ + vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; + + /* notify the VF that we do not support this request */ + bnx2x_vf_mbx_resp(bp, vf); + } else { + /* can't send a response since this VF is unknown to us + * just unlock the channel and be done with. + */ + bnx2x_unlock_vf_pf_channel(bp, vf, + mbx->first_tlv.tl.type); + } } } -- cgit v0.10.2 From b93288d5e7efc57628c59fe3f1844fb87982b409 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:35 +0000 Subject: bnx2x: Support of PF driver of a VF init request The VF driver will send an 'init' request as part of its nic load flow. This message is used by the VF to publish the GPA's of its status blocks, slow path ring and statistics buffer. The PF driver notes all this down in the VF database, and also uses this message to transfer the VF to VF_INIT state internally. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 5219373..d096e3e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1852,6 +1852,8 @@ int bnx2x_del_all_macs(struct bnx2x *bp, /* Init Function API */ void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p); +void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, + u8 vf_valid, int fw_sb_id, int igu_sb_id); u32 bnx2x_get_pretend_reg(struct bnx2x *bp); int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port); int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e6738f6..0fae563 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -5420,7 +5420,7 @@ static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; } -static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, +void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, u8 vf_valid, int fw_sb_id, int igu_sb_id) { int igu_seg_id; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index cefe448..1008d3f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -3726,6 +3726,10 @@ #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c /* [WB 160] Used for initialization of the inbound interrupts memory */ #define PXP_REG_HST_INBOUND_INT 0x103800 +/* [RW 7] Indirect access to the permission table. The fields are : {Valid; + * VFID[5:0]} + */ +#define PXP_REG_HST_ZONE_PERMISSION_TABLE 0x103400 /* [RW 32] Interrupt mask register #0 read/write */ #define PXP_REG_PXP_INT_MASK_0 0x103074 #define PXP_REG_PXP_INT_MASK_1 0x103084 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index de42f66..14e49bc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -66,6 +66,41 @@ struct bnx2x_virtf *bnx2x_vf_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) return (idx < BNX2X_NR_VIRTFN(bp)) ? BP_VF(bp, idx) : NULL; } +static void bnx2x_vf_igu_ack_sb(struct bnx2x *bp, struct bnx2x_virtf *vf, + u8 igu_sb_id, u8 segment, u16 index, u8 op, + u8 update) +{ + /* acking a VF sb through the PF - use the GRC */ + u32 ctl; + u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; + u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; + u32 func_encode = vf->abs_vfid; + u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + igu_sb_id; + struct igu_regular cmd_data = {0}; + + cmd_data.sb_id_and_flags = + ((index << IGU_REGULAR_SB_INDEX_SHIFT) | + (segment << IGU_REGULAR_SEGMENT_ACCESS_SHIFT) | + (update << IGU_REGULAR_BUPDATE_SHIFT) | + (op << IGU_REGULAR_ENABLE_INT_SHIFT)); + + ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | + func_encode << IGU_CTRL_REG_FID_SHIFT | + IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; + + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + cmd_data.sb_id_and_flags, igu_addr_data); + REG_WR(bp, igu_addr_data, cmd_data.sb_id_and_flags); + mmiowb(); + barrier(); + + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + ctl, igu_addr_ctl); + REG_WR(bp, igu_addr_ctl, ctl); + mmiowb(); + barrier(); +} + static int bnx2x_ari_enabled(struct pci_dev *dev) { return dev->bus->self && dev->bus->self->ari_enabled; @@ -364,6 +399,52 @@ static void bnx2x_vf_pglue_clear_err(struct bnx2x *bp, u8 abs_vfid) REG_WR(bp, was_err_reg, 1 << (abs_vfid & 0x1f)); } +static void bnx2x_vf_igu_reset(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int i; + u32 val; + + /* Set VF masks and configuration - pretend */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); + + val = REG_RD(bp, IGU_REG_VF_CONFIGURATION); + val |= (IGU_VF_CONF_FUNC_EN | IGU_VF_CONF_MSI_MSIX_EN); + if (vf->cfg_flags & VF_CFG_INT_SIMD) + val |= IGU_VF_CONF_SINGLE_ISR_EN; + val &= ~IGU_VF_CONF_PARENT_MASK; + val |= BP_FUNC(bp) << IGU_VF_CONF_PARENT_SHIFT; /* parent PF */ + REG_WR(bp, IGU_REG_VF_CONFIGURATION, val); + + DP(BNX2X_MSG_IOV, + "value in IGU_REG_VF_CONFIGURATION of vf %d after write %x\n", + vf->abs_vfid, REG_RD(bp, IGU_REG_VF_CONFIGURATION)); + + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + /* iterate over all queues, clear sb consumer */ + for (i = 0; i < vf_sb_count(vf); i++) { + u8 igu_sb_id = vf_igu_sb(vf, i); + + /* zero prod memory */ + REG_WR(bp, IGU_REG_PROD_CONS_MEMORY + igu_sb_id * 4, 0); + + /* clear sb state machine */ + bnx2x_igu_clear_sb_gen(bp, vf->abs_vfid, igu_sb_id, + false /* VF */); + + /* disable + update */ + bnx2x_vf_igu_ack_sb(bp, vf, igu_sb_id, USTORM_ID, 0, + IGU_INT_DISABLE, 1); + } +} + void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid) { /* set the VF-PF association in the FW */ @@ -381,6 +462,17 @@ void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid) bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); } +static void bnx2x_vf_enable_traffic(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + /* Reset vf in IGU interrupts are still disabled */ + bnx2x_vf_igu_reset(bp, vf); + + /* pretend to enable the vf with the PBF */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + REG_WR(bp, PBF_REG_DISABLE_VF, 0); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + static u8 bnx2x_vf_is_pcie_pending(struct bnx2x *bp, u8 abs_vfid) { struct pci_dev *dev; @@ -997,6 +1089,14 @@ void bnx2x_iov_sp_task(struct bnx2x *bp) } } } +static void bnx2x_vf_qtbl_set_q(struct bnx2x *bp, u8 abs_vfid, u8 qid, + u8 enable) +{ + u32 reg = PXP_REG_HST_ZONE_PERMISSION_TABLE + qid * 4; + u32 val = enable ? (abs_vfid | (1 << 6)) : 0; + + REG_WR(bp, reg, val); +} u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf) { @@ -1108,6 +1208,65 @@ int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, return 0; } +int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, dma_addr_t *sb_map) +{ + struct bnx2x_func_init_params func_init = {0}; + u16 flags = 0; + int i; + + /* the sb resources are initialized at this point, do the + * FW/HW initializations + */ + for_each_vf_sb(vf, i) + bnx2x_init_sb(bp, (dma_addr_t)sb_map[i], vf->abs_vfid, true, + vf_igu_sb(vf, i), vf_igu_sb(vf, i)); + + /* Sanity checks */ + if (vf->state != VF_ACQUIRED) { + DP(BNX2X_MSG_IOV, "VF[%d] is not in VF_ACQUIRED, but %d\n", + vf->abs_vfid, vf->state); + return -EINVAL; + } + /* FLR cleanup epilogue */ + if (bnx2x_vf_flr_clnup_epilog(bp, vf->abs_vfid)) + return -EBUSY; + + /* reset IGU VF statistics: MSIX */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + vf->abs_vfid * 4 , 0); + + /* vf init */ + if (vf->cfg_flags & VF_CFG_STATS) + flags |= (FUNC_FLG_STATS | FUNC_FLG_SPQ); + + if (vf->cfg_flags & VF_CFG_TPA) + flags |= FUNC_FLG_TPA; + + if (is_vf_multi(vf)) + flags |= FUNC_FLG_RSS; + + /* function setup */ + func_init.func_flgs = flags; + func_init.pf_id = BP_FUNC(bp); + func_init.func_id = FW_VF_HANDLE(vf->abs_vfid); + func_init.fw_stat_map = vf->fw_stat_map; + func_init.spq_map = vf->spq_map; + func_init.spq_prod = 0; + bnx2x_func_init(bp, &func_init); + + /* Enable the vf */ + bnx2x_vf_enable_access(bp, vf->abs_vfid); + bnx2x_vf_enable_traffic(bp, vf); + + /* queue protection table */ + for_each_vfq(vf, i) + bnx2x_vf_qtbl_set_q(bp, vf->abs_vfid, + vfq_qzone_id(vf, vfq_get(vf, i)), true); + + vf->state = VF_ENABLED; + + return 0; +} + void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, enum channel_tlvs tlv) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 5248ebe..6dac57e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -267,6 +267,8 @@ struct bnx2x_virtf { #define for_each_vf_sb(vf, var) \ for ((var) = 0; (var) < vf_sb_count(vf); (var)++) +#define is_vf_multi(vf) (vf_rxq_count(vf) > 1) + #define HW_VF_HANDLE(bp, abs_vfid) \ (u16)(BP_ABS_FUNC((bp)) | (1<<3) | ((u16)(abs_vfid) << 4)) @@ -427,8 +429,10 @@ void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event); void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid); /* acquire */ int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, - struct vf_pf_resc_request *resc); - + struct vf_pf_resc_request *resc); +/* init */ +int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, + dma_addr_t *sb_map); static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp, struct bnx2x_virtf *vf) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 3b6b577..7aa0e4f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -19,6 +19,7 @@ #include "bnx2x.h" #include "bnx2x_sriov.h" +#include /* place a given tlv on the tlv buffer at a given offset */ void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, @@ -355,6 +356,20 @@ static void bnx2x_vf_mbx_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, bnx2x_vf_mbx_acquire_resp(bp, vf, mbx, rc); } +static void bnx2x_vf_mbx_init_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct vfpf_init_tlv *init = &mbx->msg->req.init; + + /* record ghost addresses from vf message */ + vf->spq_map = init->spq_addr; + vf->fw_stat_map = init->stats_addr; + vf->op_rc = bnx2x_vf_init(bp, vf, (dma_addr_t *)init->sb_addr); + + /* response */ + bnx2x_vf_mbx_resp(bp, vf); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -373,6 +388,9 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, case CHANNEL_TLV_ACQUIRE: bnx2x_vf_mbx_acquire(bp, vf, mbx); break; + case CHANNEL_TLV_INIT: + bnx2x_vf_mbx_init_vf(bp, vf, mbx); + break; } } else { /* unknown TLV - this may belong to a VF driver from the future -- cgit v0.10.2 From 67c431a5f2f3e0dda511509ed5773346839c07c0 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:36 +0000 Subject: bnx2x: Support statistics collection for VFs by the PF Statistics are collected by the PF driver. The collection is performed via a query sent to the device which is basically an array of 3-tuples of the form (statistics client, function, DMAE address). In this patch the PF driver adds to the query, on top of the statistics clients it is maintaining for itself (rss queues, storage, etc), the 3-tuples for the VFs it is maintaining. The addresses used are the GPAs of the statistics buffers supplied by the VF in the init message on the VF <-> PF channel. The function parameter ensures that the iommu will translate the GPA to the correct physical address. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 0fae563..6f21a09 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -5251,7 +5251,8 @@ static void bnx2x_timer(unsigned long data) if (!netif_running(bp->dev)) return; - if (!BP_NOMCP(bp)) { + if (IS_PF(bp) && + !BP_NOMCP(bp)) { int mb_idx = BP_FW_MB_IDX(bp); u32 drv_pulse; u32 mcp_pulse; @@ -7670,66 +7671,6 @@ void bnx2x_free_mem(struct bnx2x *bp) BCM_PAGE_SIZE * NUM_EQ_PAGES); } -static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) -{ - int num_groups; - int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1; - - /* number of queues for statistics is number of eth queues + FCoE */ - u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe_stats; - - /* Total number of FW statistics requests = - * 1 for port stats + 1 for PF stats + potential 1 for FCoE stats + - * num of queues - */ - bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats; - - - /* Request is built from stats_query_header and an array of - * stats_query_cmd_group each of which contains - * STATS_QUERY_CMD_COUNT rules. The real number or requests is - * configured in the stats_query_header. - */ - num_groups = ((bp->fw_stats_num) / STATS_QUERY_CMD_COUNT) + - (((bp->fw_stats_num) % STATS_QUERY_CMD_COUNT) ? 1 : 0); - - bp->fw_stats_req_sz = sizeof(struct stats_query_header) + - num_groups * sizeof(struct stats_query_cmd_group); - - /* Data for statistics requests + stats_conter - * - * stats_counter holds per-STORM counters that are incremented - * when STORM has finished with the current request. - * - * memory for FCoE offloaded statistics are counted anyway, - * even if they will not be sent. - */ - bp->fw_stats_data_sz = sizeof(struct per_port_stats) + - sizeof(struct per_pf_stats) + - sizeof(struct fcoe_statistics_params) + - sizeof(struct per_queue_stats) * num_queue_stats + - sizeof(struct stats_counter); - - BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping, - bp->fw_stats_data_sz + bp->fw_stats_req_sz); - - /* Set shortcuts */ - bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats; - bp->fw_stats_req_mapping = bp->fw_stats_mapping; - - bp->fw_stats_data = (struct bnx2x_fw_stats_data *) - ((u8 *)bp->fw_stats + bp->fw_stats_req_sz); - - bp->fw_stats_data_mapping = bp->fw_stats_mapping + - bp->fw_stats_req_sz; - return 0; - -alloc_mem_err: - BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, - bp->fw_stats_data_sz + bp->fw_stats_req_sz); - BNX2X_ERR("Can't allocate memory\n"); - return -ENOMEM; -} int bnx2x_alloc_mem_cnic(struct bnx2x *bp) { @@ -7776,10 +7717,6 @@ int bnx2x_alloc_mem(struct bnx2x *bp) BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping, sizeof(struct bnx2x_slowpath)); - /* Allocated memory for FW statistics */ - if (bnx2x_alloc_fw_stats_mem(bp)) - goto alloc_mem_err; - /* Allocate memory for CDU context: * This memory is allocated separately and not in the generic ILT * functions because CDU differs in few aspects: @@ -7808,6 +7745,9 @@ int bnx2x_alloc_mem(struct bnx2x *bp) if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC)) goto alloc_mem_err; + if (bnx2x_iov_alloc_mem(bp)) + goto alloc_mem_err; + /* Slow path ring */ BNX2X_PCI_ALLOC(bp->spq, &bp->spq_mapping, BCM_PAGE_SIZE); @@ -7815,13 +7755,6 @@ int bnx2x_alloc_mem(struct bnx2x *bp) BNX2X_PCI_ALLOC(bp->eq_ring, &bp->eq_mapping, BCM_PAGE_SIZE * NUM_EQ_PAGES); - - /* fastpath */ - /* need to be done at the end, since it's self adjusting to amount - * of memory available for RSS queues - */ - if (bnx2x_alloc_fp_mem(bp)) - goto alloc_mem_err; return 0; alloc_mem_err: diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 09b625e..147933a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -5199,6 +5199,27 @@ void bnx2x_init_queue_obj(struct bnx2x *bp, obj->set_pending = bnx2x_queue_set_pending; } +/* return a queue object's logical state*/ +int bnx2x_get_q_logical_state(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj) +{ + switch (obj->state) { + case BNX2X_Q_STATE_ACTIVE: + case BNX2X_Q_STATE_MULTI_COS: + return BNX2X_Q_LOGICAL_STATE_ACTIVE; + case BNX2X_Q_STATE_RESET: + case BNX2X_Q_STATE_INITIALIZED: + case BNX2X_Q_STATE_MCOS_TERMINATED: + case BNX2X_Q_STATE_INACTIVE: + case BNX2X_Q_STATE_STOPPED: + case BNX2X_Q_STATE_TERMINATED: + case BNX2X_Q_STATE_FLRED: + return BNX2X_Q_LOGICAL_STATE_STOPPED; + default: + return -EINVAL; + } +} + /********************** Function state object *********************************/ enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp, struct bnx2x_func_sp_obj *o) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index adbd91b..b304678 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -776,6 +776,12 @@ enum bnx2x_q_state { BNX2X_Q_STATE_MAX, }; +/* Allowed Queue states */ +enum bnx2x_q_logical_state { + BNX2X_Q_LOGICAL_STATE_ACTIVE, + BNX2X_Q_LOGICAL_STATE_STOPPED, +}; + /* Allowed commands */ enum bnx2x_queue_cmd { BNX2X_Q_CMD_INIT, @@ -1261,6 +1267,9 @@ void bnx2x_init_queue_obj(struct bnx2x *bp, int bnx2x_queue_state_change(struct bnx2x *bp, struct bnx2x_queue_state_params *params); +int bnx2x_get_q_logical_state(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj); + /********************* VLAN-MAC ****************/ void bnx2x_init_mac_obj(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *mac_obj, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 14e49bc..71e1c6f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1069,6 +1069,80 @@ void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work) } } +void bnx2x_iov_adjust_stats_req(struct bnx2x *bp) +{ + int i; + int first_queue_query_index, num_queues_req; + dma_addr_t cur_data_offset; + struct stats_query_entry *cur_query_entry; + u8 stats_count = 0; + bool is_fcoe = false; + + if (!IS_SRIOV(bp)) + return; + + if (!NO_FCOE(bp)) + is_fcoe = true; + + /* fcoe adds one global request and one queue request */ + num_queues_req = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe; + first_queue_query_index = BNX2X_FIRST_QUEUE_QUERY_IDX - + (is_fcoe ? 0 : 1); + + DP(BNX2X_MSG_IOV, + "BNX2X_NUM_ETH_QUEUES %d, is_fcoe %d, first_queue_query_index %d => determined the last non virtual statistics query index is %d. Will add queries on top of that\n", + BNX2X_NUM_ETH_QUEUES(bp), is_fcoe, first_queue_query_index, + first_queue_query_index + num_queues_req); + + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, queue_stats) + + num_queues_req * sizeof(struct per_queue_stats); + + cur_query_entry = &bp->fw_stats_req-> + query[first_queue_query_index + num_queues_req]; + + for_each_vf(bp, i) { + int j; + struct bnx2x_virtf *vf = BP_VF(bp, i); + + if (vf->state != VF_ENABLED) { + DP(BNX2X_MSG_IOV, + "vf %d not enabled so no stats for it\n", + vf->abs_vfid); + continue; + } + + DP(BNX2X_MSG_IOV, "add addresses for vf %d\n", vf->abs_vfid); + for_each_vfq(vf, j) { + struct bnx2x_vf_queue *rxq = vfq_get(vf, j); + + /* collect stats fro active queues only */ + if (bnx2x_get_q_logical_state(bp, &rxq->sp_obj) == + BNX2X_Q_LOGICAL_STATE_STOPPED) + continue; + + /* create stats query entry for this queue */ + cur_query_entry->kind = STATS_TYPE_QUEUE; + cur_query_entry->index = vfq_cl_id(vf, rxq); + cur_query_entry->funcID = + cpu_to_le16(FW_VF_HANDLE(vf->abs_vfid)); + cur_query_entry->address.hi = + cpu_to_le32(U64_HI(vf->fw_stat_map)); + cur_query_entry->address.lo = + cpu_to_le32(U64_LO(vf->fw_stat_map)); + DP(BNX2X_MSG_IOV, + "added address %x %x for vf %d queue %d client %d\n", + cur_query_entry->address.hi, + cur_query_entry->address.lo, cur_query_entry->funcID, + j, cur_query_entry->index); + cur_query_entry++; + cur_data_offset += sizeof(struct per_queue_stats); + stats_count++; + } + } + bp->fw_stats_req->hdr.cmd_num = bp->fw_stats_num + stats_count; +} + void bnx2x_iov_sp_task(struct bnx2x *bp) { int i; @@ -1089,6 +1163,23 @@ void bnx2x_iov_sp_task(struct bnx2x *bp) } } } + +static inline +struct bnx2x_virtf *__vf_from_stat_id(struct bnx2x *bp, u8 stat_id) +{ + int i; + struct bnx2x_virtf *vf = NULL; + + for_each_vf(bp, i) { + vf = BP_VF(bp, i); + if (stat_id >= vf->igu_base_id && + stat_id < vf->igu_base_id + vf_sb_count(vf)) + break; + } + return vf; +} + +/* VF API helpers */ static void bnx2x_vf_qtbl_set_q(struct bnx2x *bp, u8 abs_vfid, u8 qid, u8 enable) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 6dac57e..c3d27b5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -423,6 +423,8 @@ void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, struct bnx2x_queue_sp_obj **q_obj); void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, bool queue_work); int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem); +void bnx2x_iov_adjust_stats_req(struct bnx2x *bp); +void bnx2x_iov_storm_stats_update(struct bnx2x *bp); void bnx2x_iov_sp_task(struct bnx2x *bp); /* global vf mailbox routines */ void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 89ec066..93a8e74 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -19,7 +19,7 @@ #include "bnx2x_stats.h" #include "bnx2x_cmn.h" - +#include "bnx2x_sriov.h" /* Statistics */ @@ -79,6 +79,42 @@ static inline u16 bnx2x_get_port_stats_dma_len(struct bnx2x *bp) * Init service functions */ +static void bnx2x_dp_stats(struct bnx2x *bp) +{ + int i; + + DP(BNX2X_MSG_STATS, "dumping stats:\n" + "fw_stats_req\n" + " hdr\n" + " cmd_num %d\n" + " reserved0 %d\n" + " drv_stats_counter %d\n" + " reserved1 %d\n" + " stats_counters_addrs %x %x\n", + bp->fw_stats_req->hdr.cmd_num, + bp->fw_stats_req->hdr.reserved0, + bp->fw_stats_req->hdr.drv_stats_counter, + bp->fw_stats_req->hdr.reserved1, + bp->fw_stats_req->hdr.stats_counters_addrs.hi, + bp->fw_stats_req->hdr.stats_counters_addrs.lo); + + for (i = 0; i < bp->fw_stats_req->hdr.cmd_num; i++) { + DP(BNX2X_MSG_STATS, + "query[%d]\n" + " kind %d\n" + " index %d\n" + " funcID %d\n" + " reserved %d\n" + " address %x %x\n", + i, bp->fw_stats_req->query[i].kind, + bp->fw_stats_req->query[i].index, + bp->fw_stats_req->query[i].funcID, + bp->fw_stats_req->query[i].reserved, + bp->fw_stats_req->query[i].address.hi, + bp->fw_stats_req->query[i].address.lo); + } +} + /* Post the next statistics ramrod. Protect it with the spin in * order to ensure the strict order between statistics ramrods * (each ramrod has a sequence number passed in a @@ -103,7 +139,9 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "Sending statistics ramrod %d\n", bp->fw_stats_req->hdr.drv_stats_counter); - + /* adjust the ramrod to include VF queues statistics */ + bnx2x_iov_adjust_stats_req(bp); + bnx2x_dp_stats(bp); /* send FW stats ramrod */ rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STAT_QUERY, 0, @@ -482,6 +520,12 @@ static void bnx2x_func_stats_init(struct bnx2x *bp) static void bnx2x_stats_start(struct bnx2x *bp) { + /* vfs travel through here as part of the statistics FSM, but no action + * is required + */ + if (IS_VF(bp)) + return; + if (bp->port.pmf) bnx2x_port_stats_init(bp); @@ -501,6 +545,11 @@ static void bnx2x_stats_pmf_start(struct bnx2x *bp) static void bnx2x_stats_restart(struct bnx2x *bp) { + /* vfs travel through here as part of the statistics FSM, but no action + * is required + */ + if (IS_VF(bp)) + return; bnx2x_stats_comp(bp); bnx2x_stats_start(bp); } @@ -832,19 +881,10 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp) return 0; } -static int bnx2x_storm_stats_update(struct bnx2x *bp) +static int bnx2x_storm_stats_validate_counters(struct bnx2x *bp) { - struct tstorm_per_port_stats *tport = - &bp->fw_stats_data->port.tstorm_port_statistics; - struct tstorm_per_pf_stats *tfunc = - &bp->fw_stats_data->pf.tstorm_pf_statistics; - struct host_func_stats *fstats = &bp->func_stats; - struct bnx2x_eth_stats *estats = &bp->eth_stats; - struct bnx2x_eth_stats_old *estats_old = &bp->eth_stats_old; struct stats_counter *counters = &bp->fw_stats_data->storm_counters; - int i; u16 cur_stats_counter; - /* Make sure we use the value of the counter * used for sending the last stats ramrod. */ @@ -880,6 +920,23 @@ static int bnx2x_storm_stats_update(struct bnx2x *bp) le16_to_cpu(counters->tstats_counter), bp->stats_counter); return -EAGAIN; } + return 0; +} + +static int bnx2x_storm_stats_update(struct bnx2x *bp) +{ + struct tstorm_per_port_stats *tport = + &bp->fw_stats_data->port.tstorm_port_statistics; + struct tstorm_per_pf_stats *tfunc = + &bp->fw_stats_data->pf.tstorm_pf_statistics; + struct host_func_stats *fstats = &bp->func_stats; + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct bnx2x_eth_stats_old *estats_old = &bp->eth_stats_old; + int i; + + /* vfs stat counter is managed by pf */ + if (IS_PF(bp) && bnx2x_storm_stats_validate_counters(bp)) + return -EAGAIN; estats->error_bytes_received_hi = 0; estats->error_bytes_received_lo = 0; @@ -1174,23 +1231,34 @@ static void bnx2x_stats_update(struct bnx2x *bp) if (bnx2x_edebug_stats_stopped(bp)) return; - if (*stats_comp != DMAE_COMP_VAL) - return; + if (IS_PF(bp)) { + if (*stats_comp != DMAE_COMP_VAL) + return; - if (bp->port.pmf) - bnx2x_hw_stats_update(bp); + if (bp->port.pmf) + bnx2x_hw_stats_update(bp); - if (bnx2x_storm_stats_update(bp)) { - if (bp->stats_pending++ == 3) { - BNX2X_ERR("storm stats were not updated for 3 times\n"); - bnx2x_panic(); + if (bnx2x_storm_stats_update(bp)) { + if (bp->stats_pending++ == 3) { + BNX2X_ERR("storm stats were not updated for 3 times\n"); + bnx2x_panic(); + } + return; } - return; + } else { + /* vf doesn't collect HW statistics, and doesn't get completions + * perform only update + */ + bnx2x_storm_stats_update(bp); } bnx2x_net_stats_update(bp); bnx2x_drv_stats_update(bp); + /* vf is done */ + if (IS_VF(bp)) + return; + if (netif_msg_timer(bp)) { struct bnx2x_eth_stats *estats = &bp->eth_stats; -- cgit v0.10.2 From 8db573baa5cf1f65ed94039ac3100ea5a94260de Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:37 +0000 Subject: bnx2x: Support of PF driver of a VF setup_q request Upon receiving a 'setup_q' request from the VF over the VF <-> PF channel the PF driver will open a corresponding queue in the device. The PF driver configures the queue with appropriate mac address, vlan configuration, etc from the VF. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d096e3e..fbe8be3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -969,6 +969,7 @@ extern struct workqueue_struct *bnx2x_wq; #define BNX2X_MAX_NUM_OF_VFS 64 #define BNX2X_VF_CID_WND 0 #define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) +#define BNX2X_CLIENTS_PER_VF 1 #define BNX2X_FIRST_VF_CID 256 #define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) #define BNX2X_VF_ID_INVALID 0xFF diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 022c491..cdb073a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2029,7 +2029,7 @@ static void bnx2x_free_fw_stats_mem(struct bnx2x *bp) static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) { - int num_groups; + int num_groups, vf_headroom = 0; int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1; /* number of queues for statistics is number of eth queues + FCoE */ @@ -2042,18 +2042,26 @@ static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) */ bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats; + /* vf stats appear in the request list, but their data is allocated by + * the VFs themselves. We don't include them in the bp->fw_stats_num as + * it is used to determine where to place the vf stats queries in the + * request struct + */ + if (IS_SRIOV(bp)) + vf_headroom = bp->vfdb->sriov.nr_virtfn * BNX2X_CLIENTS_PER_VF; + /* Request is built from stats_query_header and an array of * stats_query_cmd_group each of which contains * STATS_QUERY_CMD_COUNT rules. The real number or requests is * configured in the stats_query_header. */ num_groups = - (((bp->fw_stats_num) / STATS_QUERY_CMD_COUNT) + - (((bp->fw_stats_num) % STATS_QUERY_CMD_COUNT) ? + (((bp->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT) + + (((bp->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT) ? 1 : 0)); - DP(BNX2X_MSG_SP, "stats fw_stats_num %d, num_groups %d\n", - bp->fw_stats_num, num_groups); + DP(BNX2X_MSG_SP, "stats fw_stats_num %d, vf headroom %d, num_groups %d\n", + bp->fw_stats_num, vf_headroom, num_groups); bp->fw_stats_req_sz = sizeof(struct stats_query_header) + num_groups * sizeof(struct stats_query_cmd_group); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 71e1c6f..5b47b08 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -100,10 +100,233 @@ static void bnx2x_vf_igu_ack_sb(struct bnx2x *bp, struct bnx2x_virtf *vf, mmiowb(); barrier(); } +/* VFOP - VF slow-path operation support */ + +/* VFOP operations states */ +enum bnx2x_vfop_qctor_state { + BNX2X_VFOP_QCTOR_INIT, + BNX2X_VFOP_QCTOR_SETUP, + BNX2X_VFOP_QCTOR_INT_EN +}; + +enum bnx2x_vfop_vlan_mac_state { + BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE, + BNX2X_VFOP_VLAN_MAC_CLEAR, + BNX2X_VFOP_VLAN_MAC_CHK_DONE, + BNX2X_VFOP_MAC_CONFIG_LIST, + BNX2X_VFOP_VLAN_CONFIG_LIST, + BNX2X_VFOP_VLAN_CONFIG_LIST_0 +}; + +enum bnx2x_vfop_qsetup_state { + BNX2X_VFOP_QSETUP_CTOR, + BNX2X_VFOP_QSETUP_VLAN0, + BNX2X_VFOP_QSETUP_DONE +}; + +#define bnx2x_vfop_reset_wq(vf) atomic_set(&vf->op_in_progress, 0) + +void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx) +{ + DP(BNX2X_MSG_IOV, + "VF[%d] Q_SETUP: txq[%d]-- vfsb=%d, sb-index=%d, hc-rate=%d, flags=0x%lx, traffic-type=%d", + vf->abs_vfid, + q_idx, + sb_idx, + init_params->tx.sb_cq_index, + init_params->tx.hc_rate, + setup_params->flags, + setup_params->txq_params.traffic_type); +} -static int bnx2x_ari_enabled(struct pci_dev *dev) +void bnx2x_vfop_qctor_dump_rx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx) { - return dev->bus->self && dev->bus->self->ari_enabled; + struct bnx2x_rxq_setup_params *rxq_params = &setup_params->rxq_params; + + DP(BNX2X_MSG_IOV, "VF[%d] Q_SETUP: rxq[%d]-- vfsb=%d, sb-index=%d, hc-rate=%d, mtu=%d, buf-size=%d\n" + "sge-size=%d, max_sge_pkt=%d, tpa-agg-size=%d, flags=0x%lx, drop-flags=0x%x, cache-log=%d\n", + vf->abs_vfid, + q_idx, + sb_idx, + init_params->rx.sb_cq_index, + init_params->rx.hc_rate, + setup_params->gen_params.mtu, + rxq_params->buf_sz, + rxq_params->sge_buf_sz, + rxq_params->max_sges_pkt, + rxq_params->tpa_agg_sz, + setup_params->flags, + rxq_params->drop_flags, + rxq_params->cache_line_log); +} + +void bnx2x_vfop_qctor_prep(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q, + struct bnx2x_vfop_qctor_params *p, + unsigned long q_type) +{ + struct bnx2x_queue_init_params *init_p = &p->qstate.params.init; + struct bnx2x_queue_setup_params *setup_p = &p->prep_qsetup; + + /* INIT */ + + /* Enable host coalescing in the transition to INIT state */ + if (test_bit(BNX2X_Q_FLG_HC, &init_p->rx.flags)) + __set_bit(BNX2X_Q_FLG_HC_EN, &init_p->rx.flags); + + if (test_bit(BNX2X_Q_FLG_HC, &init_p->tx.flags)) + __set_bit(BNX2X_Q_FLG_HC_EN, &init_p->tx.flags); + + /* FW SB ID */ + init_p->rx.fw_sb_id = vf_igu_sb(vf, q->sb_idx); + init_p->tx.fw_sb_id = vf_igu_sb(vf, q->sb_idx); + + /* context */ + init_p->cxts[0] = q->cxt; + + /* SETUP */ + + /* Setup-op general parameters */ + setup_p->gen_params.spcl_id = vf->sp_cl_id; + setup_p->gen_params.stat_id = vfq_stat_id(vf, q); + + /* Setup-op pause params: + * Nothing to do, the pause thresholds are set by default to 0 which + * effectively turns off the feature for this queue. We don't want + * one queue (VF) to interfering with another queue (another VF) + */ + if (vf->cfg_flags & VF_CFG_FW_FC) + BNX2X_ERR("No support for pause to VFs (abs_vfid: %d)\n", + vf->abs_vfid); + /* Setup-op flags: + * collect statistics, zero statistics, local-switching, security, + * OV for Flex10, RSS and MCAST for leading + */ + if (test_bit(BNX2X_Q_FLG_STATS, &setup_p->flags)) + __set_bit(BNX2X_Q_FLG_ZERO_STATS, &setup_p->flags); + + /* for VFs, enable tx switching, bd coherency, and mac address + * anti-spoofing + */ + __set_bit(BNX2X_Q_FLG_TX_SWITCH, &setup_p->flags); + __set_bit(BNX2X_Q_FLG_TX_SEC, &setup_p->flags); + __set_bit(BNX2X_Q_FLG_ANTI_SPOOF, &setup_p->flags); + + if (vfq_is_leading(q)) { + __set_bit(BNX2X_Q_FLG_LEADING_RSS, &setup_p->flags); + __set_bit(BNX2X_Q_FLG_MCAST, &setup_p->flags); + } + + /* Setup-op rx parameters */ + if (test_bit(BNX2X_Q_TYPE_HAS_RX, &q_type)) { + struct bnx2x_rxq_setup_params *rxq_p = &setup_p->rxq_params; + + rxq_p->cl_qzone_id = vfq_qzone_id(vf, q); + rxq_p->fw_sb_id = vf_igu_sb(vf, q->sb_idx); + rxq_p->rss_engine_id = FW_VF_HANDLE(vf->abs_vfid); + + if (test_bit(BNX2X_Q_FLG_TPA, &setup_p->flags)) + rxq_p->max_tpa_queues = BNX2X_VF_MAX_TPA_AGG_QUEUES; + } + + /* Setup-op tx parameters */ + if (test_bit(BNX2X_Q_TYPE_HAS_TX, &q_type)) { + setup_p->txq_params.tss_leading_cl_id = vf->leading_rss; + setup_p->txq_params.fw_sb_id = vf_igu_sb(vf, q->sb_idx); + } +} + +/* VFOP queue construction */ +static void bnx2x_vfop_qctor(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_vfop_args_qctor *args = &vfop->args.qctor; + struct bnx2x_queue_state_params *q_params = &vfop->op_p->qctor.qstate; + enum bnx2x_vfop_qctor_state state = vfop->state; + + bnx2x_vfop_reset_wq(vf); + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_QCTOR_INIT: + + /* has this queue already been opened? */ + if (bnx2x_get_q_logical_state(bp, q_params->q_obj) == + BNX2X_Q_LOGICAL_STATE_ACTIVE) { + DP(BNX2X_MSG_IOV, + "Entered qctor but queue was already up. Aborting gracefully\n"); + goto op_done; + } + + /* next state */ + vfop->state = BNX2X_VFOP_QCTOR_SETUP; + + q_params->cmd = BNX2X_Q_CMD_INIT; + vfop->rc = bnx2x_queue_state_change(bp, q_params); + + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT); + + case BNX2X_VFOP_QCTOR_SETUP: + /* next state */ + vfop->state = BNX2X_VFOP_QCTOR_INT_EN; + + /* copy pre-prepared setup params to the queue-state params */ + vfop->op_p->qctor.qstate.params.setup = + vfop->op_p->qctor.prep_qsetup; + + q_params->cmd = BNX2X_Q_CMD_SETUP; + vfop->rc = bnx2x_queue_state_change(bp, q_params); + + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT); + + case BNX2X_VFOP_QCTOR_INT_EN: + + /* enable interrupts */ + bnx2x_vf_igu_ack_sb(bp, vf, vf_igu_sb(vf, args->sb_idx), + USTORM_ID, 0, IGU_INT_ENABLE, 0); + goto op_done; + default: + bnx2x_vfop_default(state); + } +op_err: + BNX2X_ERR("QCTOR[%d:%d] error: cmd %d, rc %d\n", + vf->abs_vfid, args->qid, q_params->cmd, vfop->rc); +op_done: + bnx2x_vfop_end(bp, vf, vfop); +op_pending: + return; +} + +static int bnx2x_vfop_qctor_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + vf->op_params.qctor.qstate.q_obj = &bnx2x_vfq(vf, qid, sp_obj); + + vfop->args.qctor.qid = qid; + vfop->args.qctor.sb_idx = bnx2x_vfq(vf, qid, sb_idx); + + bnx2x_vfop_opset(BNX2X_VFOP_QCTOR_INIT, + bnx2x_vfop_qctor, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qctor, + cmd->block); + } + return -ENOMEM; } static void @@ -117,225 +340,342 @@ bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid) } } -static void -bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) +/* VFOP MAC/VLAN helpers */ +static inline void bnx2x_vfop_credit(struct bnx2x *bp, + struct bnx2x_vfop *vfop, + struct bnx2x_vlan_mac_obj *obj) { - int sb_id; - u32 val; - u8 fid; + struct bnx2x_vfop_args_filters *args = &vfop->args.filters; - /* IGU in normal mode - read CAM */ - for (sb_id = 0; sb_id < IGU_REG_MAPPING_MEMORY_SIZE; sb_id++) { - val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + sb_id * 4); - if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) - continue; - fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); - if (!(fid & IGU_FID_ENCODE_IS_PF)) - bnx2x_vf_set_igu_info(bp, sb_id, - (fid & IGU_FID_VF_NUM_MASK)); + /* update credit only if there is no error + * and a valid credit counter + */ + if (!vfop->rc && args->credit) { + int cnt = 0; + struct list_head *pos; - DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", - ((fid & IGU_FID_ENCODE_IS_PF) ? "PF" : "VF"), - ((fid & IGU_FID_ENCODE_IS_PF) ? (fid & IGU_FID_PF_NUM_MASK) : - (fid & IGU_FID_VF_NUM_MASK)), sb_id, - GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)); + list_for_each(pos, &obj->head) + cnt++; + + atomic_set(args->credit, cnt); } } -static void __bnx2x_iov_free_vfdb(struct bnx2x *bp) +static int bnx2x_vfop_set_user_req(struct bnx2x *bp, + struct bnx2x_vfop_filter *pos, + struct bnx2x_vlan_mac_data *user_req) { - if (bp->vfdb) { - kfree(bp->vfdb->vfqs); - kfree(bp->vfdb->vfs); - kfree(bp->vfdb); + user_req->cmd = pos->add ? BNX2X_VLAN_MAC_ADD : + BNX2X_VLAN_MAC_DEL; + + switch (pos->type) { + case BNX2X_VFOP_FILTER_MAC: + memcpy(user_req->u.mac.mac, pos->mac, ETH_ALEN); + break; + case BNX2X_VFOP_FILTER_VLAN: + user_req->u.vlan.vlan = pos->vid; + break; + default: + BNX2X_ERR("Invalid filter type, skipping\n"); + return 1; } - bp->vfdb = NULL; + return 0; } -static int bnx2x_sriov_pci_cfg_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +static int +bnx2x_vfop_config_vlan0(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *vlan_mac, + bool add) { - int pos; - struct pci_dev *dev = bp->pdev; - - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); - if (!pos) { - BNX2X_ERR("failed to find SRIOV capability in device\n"); - return -ENODEV; - } + int rc; - iov->pos = pos; - DP(BNX2X_MSG_IOV, "sriov ext pos %d\n", pos); - pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &iov->ctrl); - pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &iov->total); - pci_read_config_word(dev, pos + PCI_SRIOV_INITIAL_VF, &iov->initial); - pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &iov->offset); - pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &iov->stride); - pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &iov->pgsz); - pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); - pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); + vlan_mac->user_req.cmd = add ? BNX2X_VLAN_MAC_ADD : + BNX2X_VLAN_MAC_DEL; + vlan_mac->user_req.u.vlan.vlan = 0; - return 0; + rc = bnx2x_config_vlan_mac(bp, vlan_mac); + if (rc == -EEXIST) + rc = 0; + return rc; } -static int bnx2x_sriov_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +static int bnx2x_vfop_config_list(struct bnx2x *bp, + struct bnx2x_vfop_filters *filters, + struct bnx2x_vlan_mac_ramrod_params *vlan_mac) { - u32 val; - - /* read the SRIOV capability structure - * The fields can be read via configuration read or - * directly from the device (starting at offset PCICFG_OFFSET) - */ - if (bnx2x_sriov_pci_cfg_info(bp, iov)) - return -ENODEV; + struct bnx2x_vfop_filter *pos, *tmp; + struct list_head rollback_list, *filters_list = &filters->head; + struct bnx2x_vlan_mac_data *user_req = &vlan_mac->user_req; + int rc = 0, cnt = 0; - /* get the number of SRIOV bars */ - iov->nres = 0; + INIT_LIST_HEAD(&rollback_list); - /* read the first_vfid */ - val = REG_RD(bp, PCICFG_OFFSET + GRC_CONFIG_REG_PF_INIT_VF); - iov->first_vf_in_pf = ((val & GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK) - * 8) - (BNX2X_MAX_NUM_OF_VFS * BP_PATH(bp)); + list_for_each_entry_safe(pos, tmp, filters_list, link) { + if (bnx2x_vfop_set_user_req(bp, pos, user_req)) + continue; - DP(BNX2X_MSG_IOV, - "IOV info[%d]: first vf %d, nres %d, cap 0x%x, ctrl 0x%x, total %d, initial %d, num vfs %d, offset %d, stride %d, page size 0x%x\n", - BP_FUNC(bp), - iov->first_vf_in_pf, iov->nres, iov->cap, iov->ctrl, iov->total, - iov->initial, iov->nr_virtfn, iov->offset, iov->stride, iov->pgsz); + rc = bnx2x_config_vlan_mac(bp, vlan_mac); + if (rc >= 0) { + cnt += pos->add ? 1 : -1; + list_del(&pos->link); + list_add(&pos->link, &rollback_list); + rc = 0; + } else if (rc == -EEXIST) { + rc = 0; + } else { + BNX2X_ERR("Failed to add a new vlan_mac command\n"); + break; + } + } - return 0; + /* rollback if error or too many rules added */ + if (rc || cnt > filters->add_cnt) { + BNX2X_ERR("error or too many rules added. Performing rollback\n"); + list_for_each_entry_safe(pos, tmp, &rollback_list, link) { + pos->add = !pos->add; /* reverse op */ + bnx2x_vfop_set_user_req(bp, pos, user_req); + bnx2x_config_vlan_mac(bp, vlan_mac); + list_del(&pos->link); + } + cnt = 0; + if (!rc) + rc = -EINVAL; + } + filters->add_cnt = cnt; + return rc; } -static u8 bnx2x_iov_get_max_queue_count(struct bnx2x *bp) +/* VFOP set VLAN/MAC */ +static void bnx2x_vfop_vlan_mac(struct bnx2x *bp, struct bnx2x_virtf *vf) { - int i; - u8 queue_count = 0; + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_vlan_mac_ramrod_params *vlan_mac = &vfop->op_p->vlan_mac; + struct bnx2x_vlan_mac_obj *obj = vlan_mac->vlan_mac_obj; + struct bnx2x_vfop_filters *filters = vfop->args.filters.multi_filter; - if (IS_SRIOV(bp)) - for_each_vf(bp, i) - queue_count += bnx2x_vf(bp, i, alloc_resc.num_sbs); + enum bnx2x_vfop_vlan_mac_state state = vfop->state; - return queue_count; -} + if (vfop->rc < 0) + goto op_err; -/* must be called after PF bars are mapped */ -int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, - int num_vfs_param) -{ - int err, i, qcount; - struct bnx2x_sriov *iov; - struct pci_dev *dev = bp->pdev; + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); - bp->vfdb = NULL; + bnx2x_vfop_reset_wq(vf); - /* verify sriov capability is present in configuration space */ - if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV)) { - DP(BNX2X_MSG_IOV, "no sriov - capability not found\n"); - return 0; - } + switch (state) { + case BNX2X_VFOP_VLAN_MAC_CLEAR: + /* next state */ + vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE; - /* verify is pf */ - if (IS_VF(bp)) - return 0; + /* do delete */ + vfop->rc = obj->delete_all(bp, obj, + &vlan_mac->user_req.vlan_mac_flags, + &vlan_mac->ramrod_flags); - /* verify chip revision */ - if (CHIP_IS_E1x(bp)) - return 0; + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); - /* check if SRIOV support is turned off */ - if (!num_vfs_param) - return 0; + case BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE: + /* next state */ + vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE; - /* SRIOV assumes that num of PF CIDs < BNX2X_FIRST_VF_CID */ - if (BNX2X_L2_MAX_CID(bp) >= BNX2X_FIRST_VF_CID) { - BNX2X_ERR("PF cids %d are overspilling into vf space (starts at %d). Abort SRIOV\n", - BNX2X_L2_MAX_CID(bp), BNX2X_FIRST_VF_CID); - return 0; - } + /* do config */ + vfop->rc = bnx2x_config_vlan_mac(bp, vlan_mac); + if (vfop->rc == -EEXIST) + vfop->rc = 0; - /* SRIOV can be enabled only with MSIX */ - if (int_mode_param == BNX2X_INT_MODE_MSI || - int_mode_param == BNX2X_INT_MODE_INTX) { - BNX2X_ERR("Forced MSI/INTx mode is incompatible with SRIOV\n"); - return 0; - } + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); - /* verify ari is enabled */ - if (!bnx2x_ari_enabled(bp->pdev)) { - BNX2X_ERR("ARI not supported, SRIOV can not be enabled\n"); - return 0; - } + case BNX2X_VFOP_VLAN_MAC_CHK_DONE: + vfop->rc = !!obj->raw.check_pending(&obj->raw); + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); - /* verify igu is in normal mode */ - if (CHIP_INT_MODE_IS_BC(bp)) { - BNX2X_ERR("IGU not normal mode, SRIOV can not be enabled\n"); - return 0; - } + case BNX2X_VFOP_MAC_CONFIG_LIST: + /* next state */ + vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE; - /* allocate the vfs database */ - bp->vfdb = kzalloc(sizeof(*(bp->vfdb)), GFP_KERNEL); - if (!bp->vfdb) { - BNX2X_ERR("failed to allocate vf database\n"); - err = -ENOMEM; - goto failed; - } + /* do list config */ + vfop->rc = bnx2x_vfop_config_list(bp, filters, vlan_mac); + if (vfop->rc) + goto op_err; - /* get the sriov info - Linux already collected all the pertinent - * information, however the sriov structure is for the private use - * of the pci module. Also we want this information regardless - * of the hyper-visor. - */ - iov = &(bp->vfdb->sriov); - err = bnx2x_sriov_info(bp, iov); - if (err) - goto failed; + set_bit(RAMROD_CONT, &vlan_mac->ramrod_flags); + vfop->rc = bnx2x_config_vlan_mac(bp, vlan_mac); + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); - /* SR-IOV capability was enabled but there are no VFs*/ - if (iov->total == 0) - goto failed; + case BNX2X_VFOP_VLAN_CONFIG_LIST: + /* next state */ + vfop->state = BNX2X_VFOP_VLAN_CONFIG_LIST_0; - /* calcuate the actual number of VFs */ - iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param); + /* remove vlan0 - could be no-op */ + vfop->rc = bnx2x_vfop_config_vlan0(bp, vlan_mac, false); + if (vfop->rc) + goto op_err; - /* allcate the vf array */ - bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) * - BNX2X_NR_VIRTFN(bp), GFP_KERNEL); - if (!bp->vfdb->vfs) { - BNX2X_ERR("failed to allocate vf array\n"); - err = -ENOMEM; - goto failed; + /* Do vlan list config. if this operation fails we try to + * restore vlan0 to keep the queue is working order + */ + vfop->rc = bnx2x_vfop_config_list(bp, filters, vlan_mac); + if (!vfop->rc) { + set_bit(RAMROD_CONT, &vlan_mac->ramrod_flags); + vfop->rc = bnx2x_config_vlan_mac(bp, vlan_mac); + } + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT); /* fall-through */ + + case BNX2X_VFOP_VLAN_CONFIG_LIST_0: + /* next state */ + vfop->state = BNX2X_VFOP_VLAN_MAC_CHK_DONE; + + if (list_empty(&obj->head)) + /* add vlan0 */ + vfop->rc = bnx2x_vfop_config_vlan0(bp, vlan_mac, true); + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); + + default: + bnx2x_vfop_default(state); } +op_err: + BNX2X_ERR("VLAN-MAC error: rc %d\n", vfop->rc); +op_done: + kfree(filters); + bnx2x_vfop_credit(bp, vfop, obj); + bnx2x_vfop_end(bp, vf, vfop); +op_pending: + return; +} - /* Initial VF init - index and abs_vfid - nr_virtfn must be set */ - for_each_vf(bp, i) { - bnx2x_vf(bp, i, index) = i; - bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i; - bnx2x_vf(bp, i, state) = VF_FREE; - INIT_LIST_HEAD(&bnx2x_vf(bp, i, op_list_head)); - mutex_init(&bnx2x_vf(bp, i, op_mutex)); - bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE; +struct bnx2x_vfop_vlan_mac_flags { + bool drv_only; + bool dont_consume; + bool single_cmd; + bool add; +}; + +static void +bnx2x_vfop_vlan_mac_prep_ramrod(struct bnx2x_vlan_mac_ramrod_params *ramrod, + struct bnx2x_vfop_vlan_mac_flags *flags) +{ + struct bnx2x_vlan_mac_data *ureq = &ramrod->user_req; + + memset(ramrod, 0, sizeof(*ramrod)); + + /* ramrod flags */ + if (flags->drv_only) + set_bit(RAMROD_DRV_CLR_ONLY, &ramrod->ramrod_flags); + if (flags->single_cmd) + set_bit(RAMROD_EXEC, &ramrod->ramrod_flags); + + /* mac_vlan flags */ + if (flags->dont_consume) + set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, &ureq->vlan_mac_flags); + + /* cmd */ + ureq->cmd = flags->add ? BNX2X_VLAN_MAC_ADD : BNX2X_VLAN_MAC_DEL; +} + +int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid, u16 vid, bool add) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_vfop_args_filters filters = { + .multi_filter = NULL, /* single command */ + .credit = &bnx2x_vfq(vf, qid, vlan_count), + }; + struct bnx2x_vfop_vlan_mac_flags flags = { + .drv_only = false, + .dont_consume = (filters.credit != NULL), + .single_cmd = true, + .add = add, + }; + struct bnx2x_vlan_mac_ramrod_params *ramrod = + &vf->op_params.vlan_mac; + + /* set ramrod params */ + bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags); + ramrod->user_req.u.vlan.vlan = vid; + + /* set object */ + ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj); + + /* set extra args */ + vfop->args.filters = filters; + + bnx2x_vfop_opset(BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE, + bnx2x_vfop_vlan_mac, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac, + cmd->block); } + return -ENOMEM; +} - /* re-read the IGU CAM for VFs - index and abs_vfid must be set */ - bnx2x_get_vf_igu_cam_info(bp); +/* VFOP queue setup (queue constructor + set vlan 0) */ +static void bnx2x_vfop_qsetup(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + int qid = vfop->args.qctor.qid; + enum bnx2x_vfop_qsetup_state state = vfop->state; + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vfop_qsetup, + .block = false, + }; + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_QSETUP_CTOR: + /* init the queue ctor command */ + vfop->state = BNX2X_VFOP_QSETUP_VLAN0; + vfop->rc = bnx2x_vfop_qctor_cmd(bp, vf, &cmd, qid); + if (vfop->rc) + goto op_err; + return; - /* get the total queue count and allocate the global queue arrays */ - qcount = bnx2x_iov_get_max_queue_count(bp); + case BNX2X_VFOP_QSETUP_VLAN0: + /* skip if non-leading or FPGA/EMU*/ + if (qid) + goto op_done; - /* allocate the queue arrays for all VFs */ - bp->vfdb->vfqs = kzalloc(qcount * sizeof(struct bnx2x_vf_queue), - GFP_KERNEL); - if (!bp->vfdb->vfqs) { - BNX2X_ERR("failed to allocate vf queue array\n"); - err = -ENOMEM; - goto failed; + /* init the queue set-vlan command (for vlan 0) */ + vfop->state = BNX2X_VFOP_QSETUP_DONE; + vfop->rc = bnx2x_vfop_vlan_set_cmd(bp, vf, &cmd, qid, 0, true); + if (vfop->rc) + goto op_err; + return; +op_err: + BNX2X_ERR("QSETUP[%d:%d] error: rc %d\n", vf->abs_vfid, qid, vfop->rc); +op_done: + case BNX2X_VFOP_QSETUP_DONE: + bnx2x_vfop_end(bp, vf, vfop); + return; + default: + bnx2x_vfop_default(state); } +} - return 0; -failed: - DP(BNX2X_MSG_IOV, "Failed err=%d\n", err); - __bnx2x_iov_free_vfdb(bp); - return err; +int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + vfop->args.qctor.qid = qid; + + bnx2x_vfop_opset(BNX2X_VFOP_QSETUP_CTOR, + bnx2x_vfop_qsetup, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qsetup, + cmd->block); + } + return -ENOMEM; } + /* VF enable primitives * when pretend is required the caller is responsible * for calling pretend prior to calling these routines @@ -610,6 +950,228 @@ static void bnx2x_vf_set_bars(struct bnx2x *bp, struct bnx2x_virtf *vf) } } +static int bnx2x_ari_enabled(struct pci_dev *dev) +{ + return dev->bus->self && dev->bus->self->ari_enabled; +} + +static void +bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) +{ + int sb_id; + u32 val; + u8 fid; + + /* IGU in normal mode - read CAM */ + for (sb_id = 0; sb_id < IGU_REG_MAPPING_MEMORY_SIZE; sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); + if (!(fid & IGU_FID_ENCODE_IS_PF)) + bnx2x_vf_set_igu_info(bp, sb_id, + (fid & IGU_FID_VF_NUM_MASK)); + + DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", + ((fid & IGU_FID_ENCODE_IS_PF) ? "PF" : "VF"), + ((fid & IGU_FID_ENCODE_IS_PF) ? (fid & IGU_FID_PF_NUM_MASK) : + (fid & IGU_FID_VF_NUM_MASK)), sb_id, + GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)); + } +} + +static void __bnx2x_iov_free_vfdb(struct bnx2x *bp) +{ + if (bp->vfdb) { + kfree(bp->vfdb->vfqs); + kfree(bp->vfdb->vfs); + kfree(bp->vfdb); + } + bp->vfdb = NULL; +} + +static int bnx2x_sriov_pci_cfg_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + int pos; + struct pci_dev *dev = bp->pdev; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) { + BNX2X_ERR("failed to find SRIOV capability in device\n"); + return -ENODEV; + } + + iov->pos = pos; + DP(BNX2X_MSG_IOV, "sriov ext pos %d\n", pos); + pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &iov->ctrl); + pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &iov->total); + pci_read_config_word(dev, pos + PCI_SRIOV_INITIAL_VF, &iov->initial); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &iov->offset); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &iov->stride); + pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &iov->pgsz); + pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); + pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); + + return 0; +} + +static int bnx2x_sriov_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + u32 val; + + /* read the SRIOV capability structure + * The fields can be read via configuration read or + * directly from the device (starting at offset PCICFG_OFFSET) + */ + if (bnx2x_sriov_pci_cfg_info(bp, iov)) + return -ENODEV; + + /* get the number of SRIOV bars */ + iov->nres = 0; + + /* read the first_vfid */ + val = REG_RD(bp, PCICFG_OFFSET + GRC_CONFIG_REG_PF_INIT_VF); + iov->first_vf_in_pf = ((val & GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK) + * 8) - (BNX2X_MAX_NUM_OF_VFS * BP_PATH(bp)); + + DP(BNX2X_MSG_IOV, + "IOV info[%d]: first vf %d, nres %d, cap 0x%x, ctrl 0x%x, total %d, initial %d, num vfs %d, offset %d, stride %d, page size 0x%x\n", + BP_FUNC(bp), + iov->first_vf_in_pf, iov->nres, iov->cap, iov->ctrl, iov->total, + iov->initial, iov->nr_virtfn, iov->offset, iov->stride, iov->pgsz); + + return 0; +} + +static u8 bnx2x_iov_get_max_queue_count(struct bnx2x *bp) +{ + int i; + u8 queue_count = 0; + + if (IS_SRIOV(bp)) + for_each_vf(bp, i) + queue_count += bnx2x_vf(bp, i, alloc_resc.num_sbs); + + return queue_count; +} + +/* must be called after PF bars are mapped */ +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, + int num_vfs_param) +{ + int err, i, qcount; + struct bnx2x_sriov *iov; + struct pci_dev *dev = bp->pdev; + + bp->vfdb = NULL; + + /* verify is pf */ + if (IS_VF(bp)) + return 0; + + /* verify sriov capability is present in configuration space */ + if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV)) + return 0; + + /* verify chip revision */ + if (CHIP_IS_E1x(bp)) + return 0; + + /* check if SRIOV support is turned off */ + if (!num_vfs_param) + return 0; + + /* SRIOV assumes that num of PF CIDs < BNX2X_FIRST_VF_CID */ + if (BNX2X_L2_MAX_CID(bp) >= BNX2X_FIRST_VF_CID) { + BNX2X_ERR("PF cids %d are overspilling into vf space (starts at %d). Abort SRIOV\n", + BNX2X_L2_MAX_CID(bp), BNX2X_FIRST_VF_CID); + return 0; + } + + /* SRIOV can be enabled only with MSIX */ + if (int_mode_param == BNX2X_INT_MODE_MSI || + int_mode_param == BNX2X_INT_MODE_INTX) + BNX2X_ERR("Forced MSI/INTx mode is incompatible with SRIOV\n"); + + err = -EIO; + /* verify ari is enabled */ + if (!bnx2x_ari_enabled(bp->pdev)) { + BNX2X_ERR("ARI not supported, SRIOV can not be enabled\n"); + return err; + } + + /* verify igu is in normal mode */ + if (CHIP_INT_MODE_IS_BC(bp)) { + BNX2X_ERR("IGU not normal mode, SRIOV can not be enabled\n"); + return err; + } + + /* allocate the vfs database */ + bp->vfdb = kzalloc(sizeof(*(bp->vfdb)), GFP_KERNEL); + if (!bp->vfdb) { + BNX2X_ERR("failed to allocate vf database\n"); + err = -ENOMEM; + goto failed; + } + + /* get the sriov info - Linux already collected all the pertinent + * information, however the sriov structure is for the private use + * of the pci module. Also we want this information regardless + * of the hyper-visor. + */ + iov = &(bp->vfdb->sriov); + err = bnx2x_sriov_info(bp, iov); + if (err) + goto failed; + + /* SR-IOV capability was enabled but there are no VFs*/ + if (iov->total == 0) + goto failed; + + /* calculate the actual number of VFs */ + iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param); + + /* allocate the vf array */ + bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) * + BNX2X_NR_VIRTFN(bp), GFP_KERNEL); + if (!bp->vfdb->vfs) { + BNX2X_ERR("failed to allocate vf array\n"); + err = -ENOMEM; + goto failed; + } + + /* Initial VF init - index and abs_vfid - nr_virtfn must be set */ + for_each_vf(bp, i) { + bnx2x_vf(bp, i, index) = i; + bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i; + bnx2x_vf(bp, i, state) = VF_FREE; + INIT_LIST_HEAD(&bnx2x_vf(bp, i, op_list_head)); + mutex_init(&bnx2x_vf(bp, i, op_mutex)); + bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE; + } + + /* re-read the IGU CAM for VFs - index and abs_vfid must be set */ + bnx2x_get_vf_igu_cam_info(bp); + + /* get the total queue count and allocate the global queue arrays */ + qcount = bnx2x_iov_get_max_queue_count(bp); + + /* allocate the queue arrays for all VFs */ + bp->vfdb->vfqs = kzalloc(qcount * sizeof(struct bnx2x_vf_queue), + GFP_KERNEL); + if (!bp->vfdb->vfqs) { + BNX2X_ERR("failed to allocate vf queue array\n"); + err = -ENOMEM; + goto failed; + } + + return 0; +failed: + DP(BNX2X_MSG_IOV, "Failed err=%d\n", err); + __bnx2x_iov_free_vfdb(bp); + return err; +} + void bnx2x_iov_remove_one(struct bnx2x *bp) { /* if SRIOV is not enabled there's nothing to do */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index c3d27b5..49d452e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -26,6 +26,8 @@ * The VF array is indexed by the relative vfid. */ #define BNX2X_VF_MAX_QUEUES 16 +#define BNX2X_VF_MAX_TPA_AGG_QUEUES 8 + struct bnx2x_sriov { u32 first_vf_in_pf; @@ -91,6 +93,11 @@ struct bnx2x_virtf; /* VFOP definitions */ typedef void (*vfop_handler_t)(struct bnx2x *bp, struct bnx2x_virtf *vf); +struct bnx2x_vfop_cmd { + vfop_handler_t done; + bool block; +}; + /* VFOP queue filters command additional arguments */ struct bnx2x_vfop_filter { struct list_head link; @@ -405,6 +412,11 @@ static u8 vfq_cl_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) return vf->igu_base_id + q->index; } +static inline u8 vfq_stat_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) +{ + return vfq_cl_id(vf, q); +} + static inline u8 vfq_qzone_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) { return vfq_cl_id(vf, q); @@ -435,6 +447,45 @@ int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, /* init */ int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, dma_addr_t *sb_map); + +/* VFOP generic helpers */ +#define bnx2x_vfop_default(state) do { \ + BNX2X_ERR("Bad state %d\n", (state)); \ + vfop->rc = -EINVAL; \ + goto op_err; \ + } while (0) + +enum { + VFOP_DONE, + VFOP_CONT, + VFOP_VERIFY_PEND, +}; + +#define bnx2x_vfop_finalize(vf, rc, next) do { \ + if ((rc) < 0) \ + goto op_err; \ + else if ((rc) > 0) \ + goto op_pending; \ + else if ((next) == VFOP_DONE) \ + goto op_done; \ + else if ((next) == VFOP_VERIFY_PEND) \ + BNX2X_ERR("expected pending\n"); \ + else { \ + DP(BNX2X_MSG_IOV, "no ramrod. scheduling\n"); \ + atomic_set(&vf->op_in_progress, 1); \ + queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); \ + return; \ + } \ + } while (0) + +#define bnx2x_vfop_opset(first_state, trans_hndlr, done_hndlr) \ + do { \ + vfop->state = first_state; \ + vfop->op_p = &vf->op_params; \ + vfop->transition = trans_hndlr; \ + vfop->done = done_hndlr; \ + } while (0) + static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp, struct bnx2x_virtf *vf) { @@ -443,6 +494,132 @@ static inline struct bnx2x_vfop *bnx2x_vfop_cur(struct bnx2x *bp, return list_first_entry(&vf->op_list_head, struct bnx2x_vfop, link); } +static inline struct bnx2x_vfop *bnx2x_vfop_add(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = kzalloc(sizeof(*vfop), GFP_KERNEL); + + WARN(!mutex_is_locked(&vf->op_mutex), "about to access vf op linked list but mutex was not locked!"); + if (vfop) { + INIT_LIST_HEAD(&vfop->link); + list_add(&vfop->link, &vf->op_list_head); + } + return vfop; +} + +static inline void bnx2x_vfop_end(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vfop *vfop) +{ + /* rc < 0 - error, otherwise set to 0 */ + DP(BNX2X_MSG_IOV, "rc was %d\n", vfop->rc); + if (vfop->rc >= 0) + vfop->rc = 0; + DP(BNX2X_MSG_IOV, "rc is now %d\n", vfop->rc); + + /* unlink the current op context and propagate error code + * must be done before invoking the 'done()' handler + */ + WARN(!mutex_is_locked(&vf->op_mutex), + "about to access vf op linked list but mutex was not locked!"); + list_del(&vfop->link); + + if (list_empty(&vf->op_list_head)) { + DP(BNX2X_MSG_IOV, "list was empty %d\n", vfop->rc); + vf->op_rc = vfop->rc; + DP(BNX2X_MSG_IOV, "copying rc vf->op_rc %d, vfop->rc %d\n", + vf->op_rc, vfop->rc); + } else { + struct bnx2x_vfop *cur_vfop; + + DP(BNX2X_MSG_IOV, "list not empty %d\n", vfop->rc); + cur_vfop = bnx2x_vfop_cur(bp, vf); + cur_vfop->rc = vfop->rc; + DP(BNX2X_MSG_IOV, "copying rc vf->op_rc %d, vfop->rc %d\n", + vf->op_rc, vfop->rc); + } + + /* invoke done handler */ + if (vfop->done) { + DP(BNX2X_MSG_IOV, "calling done handler\n"); + vfop->done(bp, vf); + } + + DP(BNX2X_MSG_IOV, "done handler complete. vf->op_rc %d, vfop->rc %d\n", + vf->op_rc, vfop->rc); + + /* if this is the last nested op reset the wait_blocking flag + * to release any blocking wrappers, only after 'done()' is invoked + */ + if (list_empty(&vf->op_list_head)) { + DP(BNX2X_MSG_IOV, "list was empty after done %d\n", vfop->rc); + vf->op_wait_blocking = false; + } + + kfree(vfop); +} + +static inline int bnx2x_vfop_wait_blocking(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + /* can take a while if any port is running */ + int cnt = 5000; + + might_sleep(); + while (cnt--) { + if (vf->op_wait_blocking == false) { +#ifdef BNX2X_STOP_ON_ERROR + DP(BNX2X_MSG_IOV, "exit (cnt %d)\n", 5000 - cnt); +#endif + return 0; + } + usleep_range(1000, 2000); + + if (bp->panic) + return -EIO; + } + + /* timeout! */ +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + + return -EBUSY; +} + +static inline int bnx2x_vfop_transition(struct bnx2x *bp, + struct bnx2x_virtf *vf, + vfop_handler_t transition, + bool block) +{ + if (block) + vf->op_wait_blocking = true; + transition(bp, vf); + if (block) + return bnx2x_vfop_wait_blocking(bp, vf); + return 0; +} + +/* VFOP queue construction helpers */ +void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx); + +void bnx2x_vfop_qctor_dump_rx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx); + +void bnx2x_vfop_qctor_prep(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q, + struct bnx2x_vfop_qctor_params *p, + unsigned long q_type); +int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid); + int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); /* VF FLR helpers */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 7aa0e4f..6605567 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -370,6 +370,149 @@ static void bnx2x_vf_mbx_init_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, bnx2x_vf_mbx_resp(bp, vf); } +/* convert MBX queue-flags to standard SP queue-flags */ +static void bnx2x_vf_mbx_set_q_flags(u32 mbx_q_flags, + unsigned long *sp_q_flags) +{ + if (mbx_q_flags & VFPF_QUEUE_FLG_TPA) + __set_bit(BNX2X_Q_FLG_TPA, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_TPA_IPV6) + __set_bit(BNX2X_Q_FLG_TPA_IPV6, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_TPA_GRO) + __set_bit(BNX2X_Q_FLG_TPA_GRO, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_STATS) + __set_bit(BNX2X_Q_FLG_STATS, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_OV) + __set_bit(BNX2X_Q_FLG_OV, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_VLAN) + __set_bit(BNX2X_Q_FLG_VLAN, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_COS) + __set_bit(BNX2X_Q_FLG_COS, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_HC) + __set_bit(BNX2X_Q_FLG_HC, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_DHC) + __set_bit(BNX2X_Q_FLG_DHC, sp_q_flags); +} + +static void bnx2x_vf_mbx_setup_q(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct vfpf_setup_q_tlv *setup_q = &mbx->msg->req.setup_q; + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vf_mbx_resp, + .block = false, + }; + + /* verify vf_qid */ + if (setup_q->vf_qid >= vf_rxq_count(vf)) { + BNX2X_ERR("vf_qid %d invalid, max queue count is %d\n", + setup_q->vf_qid, vf_rxq_count(vf)); + vf->op_rc = -EINVAL; + goto response; + } + + /* tx queues must be setup alongside rx queues thus if the rx queue + * is not marked as valid there's nothing to do. + */ + if (setup_q->param_valid & (VFPF_RXQ_VALID|VFPF_TXQ_VALID)) { + struct bnx2x_vf_queue *q = vfq_get(vf, setup_q->vf_qid); + unsigned long q_type = 0; + + struct bnx2x_queue_init_params *init_p; + struct bnx2x_queue_setup_params *setup_p; + + /* reinit the VF operation context */ + memset(&vf->op_params.qctor, 0 , sizeof(vf->op_params.qctor)); + setup_p = &vf->op_params.qctor.prep_qsetup; + init_p = &vf->op_params.qctor.qstate.params.init; + + /* activate immediately */ + __set_bit(BNX2X_Q_FLG_ACTIVE, &setup_p->flags); + + if (setup_q->param_valid & VFPF_TXQ_VALID) { + struct bnx2x_txq_setup_params *txq_params = + &setup_p->txq_params; + + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + /* save sb resource index */ + q->sb_idx = setup_q->txq.vf_sb; + + /* tx init */ + init_p->tx.hc_rate = setup_q->txq.hc_rate; + init_p->tx.sb_cq_index = setup_q->txq.sb_index; + + bnx2x_vf_mbx_set_q_flags(setup_q->txq.flags, + &init_p->tx.flags); + + /* tx setup - flags */ + bnx2x_vf_mbx_set_q_flags(setup_q->txq.flags, + &setup_p->flags); + + /* tx setup - general, nothing */ + + /* tx setup - tx */ + txq_params->dscr_map = setup_q->txq.txq_addr; + txq_params->sb_cq_index = setup_q->txq.sb_index; + txq_params->traffic_type = setup_q->txq.traffic_type; + + bnx2x_vfop_qctor_dump_tx(bp, vf, init_p, setup_p, + q->index, q->sb_idx); + } + + if (setup_q->param_valid & VFPF_RXQ_VALID) { + struct bnx2x_rxq_setup_params *rxq_params = + &setup_p->rxq_params; + + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + + /* Note: there is no support for different SBs + * for TX and RX + */ + q->sb_idx = setup_q->rxq.vf_sb; + + /* rx init */ + init_p->rx.hc_rate = setup_q->rxq.hc_rate; + init_p->rx.sb_cq_index = setup_q->rxq.sb_index; + bnx2x_vf_mbx_set_q_flags(setup_q->rxq.flags, + &init_p->rx.flags); + + /* rx setup - flags */ + bnx2x_vf_mbx_set_q_flags(setup_q->rxq.flags, + &setup_p->flags); + + /* rx setup - general */ + setup_p->gen_params.mtu = setup_q->rxq.mtu; + + /* rx setup - rx */ + rxq_params->drop_flags = setup_q->rxq.drop_flags; + rxq_params->dscr_map = setup_q->rxq.rxq_addr; + rxq_params->sge_map = setup_q->rxq.sge_addr; + rxq_params->rcq_map = setup_q->rxq.rcq_addr; + rxq_params->rcq_np_map = setup_q->rxq.rcq_np_addr; + rxq_params->buf_sz = setup_q->rxq.buf_sz; + rxq_params->tpa_agg_sz = setup_q->rxq.tpa_agg_sz; + rxq_params->max_sges_pkt = setup_q->rxq.max_sge_pkt; + rxq_params->sge_buf_sz = setup_q->rxq.sge_buf_sz; + rxq_params->cache_line_log = + setup_q->rxq.cache_line_log; + rxq_params->sb_cq_index = setup_q->rxq.sb_index; + + bnx2x_vfop_qctor_dump_rx(bp, vf, init_p, setup_p, + q->index, q->sb_idx); + } + /* complete the preparations */ + bnx2x_vfop_qctor_prep(bp, vf, q, &vf->op_params.qctor, q_type); + + vf->op_rc = bnx2x_vfop_qsetup_cmd(bp, vf, &cmd, q->index); + if (vf->op_rc) + goto response; + return; + } +response: + bnx2x_vf_mbx_resp(bp, vf); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -391,6 +534,9 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, case CHANNEL_TLV_INIT: bnx2x_vf_mbx_init_vf(bp, vf, mbx); break; + case CHANNEL_TLV_SETUP_Q: + bnx2x_vf_mbx_setup_q(bp, vf, mbx); + break; } } else { /* unknown TLV - this may belong to a VF driver from the future -- cgit v0.10.2 From 954ea7480b11e67266c760c8c67fc337a3a6d5b9 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:38 +0000 Subject: bnx2x: Support of PF driver of a VF q_filters request The VF driver uses the 'q_filters' message on the VF <-> PF channel for configuring an open queue, for example when the rxmode changes. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 5b47b08..e63925c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -102,6 +102,8 @@ static void bnx2x_vf_igu_ack_sb(struct bnx2x *bp, struct bnx2x_virtf *vf, } /* VFOP - VF slow-path operation support */ +#define BNX2X_VFOP_FILTER_ADD_CNT_MAX 0x10000 + /* VFOP operations states */ enum bnx2x_vfop_qctor_state { BNX2X_VFOP_QCTOR_INIT, @@ -124,6 +126,17 @@ enum bnx2x_vfop_qsetup_state { BNX2X_VFOP_QSETUP_DONE }; +enum bnx2x_vfop_mcast_state { + BNX2X_VFOP_MCAST_DEL, + BNX2X_VFOP_MCAST_ADD, + BNX2X_VFOP_MCAST_CHK_DONE +}; + +enum bnx2x_vfop_rxmode_state { + BNX2X_VFOP_RXMODE_CONFIG, + BNX2X_VFOP_RXMODE_DONE +}; + #define bnx2x_vfop_reset_wq(vf) atomic_set(&vf->op_in_progress, 0) void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf, @@ -572,6 +585,57 @@ bnx2x_vfop_vlan_mac_prep_ramrod(struct bnx2x_vlan_mac_ramrod_params *ramrod, ureq->cmd = flags->add ? BNX2X_VLAN_MAC_ADD : BNX2X_VLAN_MAC_DEL; } +static inline void +bnx2x_vfop_mac_prep_ramrod(struct bnx2x_vlan_mac_ramrod_params *ramrod, + struct bnx2x_vfop_vlan_mac_flags *flags) +{ + bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, flags); + set_bit(BNX2X_ETH_MAC, &ramrod->user_req.vlan_mac_flags); +} + +int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + struct bnx2x_vfop_filters *macs, + int qid, bool drv_only) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_vfop_args_filters filters = { + .multi_filter = macs, + .credit = NULL, /* consume credit */ + }; + struct bnx2x_vfop_vlan_mac_flags flags = { + .drv_only = drv_only, + .dont_consume = (filters.credit != NULL), + .single_cmd = false, + .add = false, /* don't care since only the items in the + * filters list affect the sp operation, + * not the list itself + */ + }; + struct bnx2x_vlan_mac_ramrod_params *ramrod = + &vf->op_params.vlan_mac; + + /* set ramrod params */ + bnx2x_vfop_mac_prep_ramrod(ramrod, &flags); + + /* set object */ + ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj); + + /* set extra args */ + filters.multi_filter->add_cnt = BNX2X_VFOP_FILTER_ADD_CNT_MAX; + vfop->args.filters = filters; + + bnx2x_vfop_opset(BNX2X_VFOP_MAC_CONFIG_LIST, + bnx2x_vfop_vlan_mac, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac, + cmd->block); + } + return -ENOMEM; +} + int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd, @@ -611,6 +675,48 @@ int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp, return -ENOMEM; } +int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + struct bnx2x_vfop_filters *vlans, + int qid, bool drv_only) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_vfop_args_filters filters = { + .multi_filter = vlans, + .credit = &bnx2x_vfq(vf, qid, vlan_count), + }; + struct bnx2x_vfop_vlan_mac_flags flags = { + .drv_only = drv_only, + .dont_consume = (filters.credit != NULL), + .single_cmd = false, + .add = false, /* don't care */ + }; + struct bnx2x_vlan_mac_ramrod_params *ramrod = + &vf->op_params.vlan_mac; + + /* set ramrod params */ + bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags); + + /* set object */ + ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj); + + /* set extra args */ + filters.multi_filter->add_cnt = vf_vlan_rules_cnt(vf) - + atomic_read(filters.credit); + + vfop->args.filters = filters; + + bnx2x_vfop_opset(BNX2X_VFOP_VLAN_CONFIG_LIST, + bnx2x_vfop_vlan_mac, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac, + cmd->block); + } + return -ENOMEM; +} + /* VFOP queue setup (queue constructor + set vlan 0) */ static void bnx2x_vfop_qsetup(struct bnx2x *bp, struct bnx2x_virtf *vf) { @@ -676,6 +782,180 @@ int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp, return -ENOMEM; } +/* VFOP multi-casts */ +static void bnx2x_vfop_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_mcast_ramrod_params *mcast = &vfop->op_p->mcast; + struct bnx2x_raw_obj *raw = &mcast->mcast_obj->raw; + struct bnx2x_vfop_args_mcast *args = &vfop->args.mc_list; + enum bnx2x_vfop_mcast_state state = vfop->state; + int i; + + bnx2x_vfop_reset_wq(vf); + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_MCAST_DEL: + /* clear existing mcasts */ + vfop->state = BNX2X_VFOP_MCAST_ADD; + vfop->rc = bnx2x_config_mcast(bp, mcast, BNX2X_MCAST_CMD_DEL); + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT); + + case BNX2X_VFOP_MCAST_ADD: + if (raw->check_pending(raw)) + goto op_pending; + + if (args->mc_num) { + /* update mcast list on the ramrod params */ + INIT_LIST_HEAD(&mcast->mcast_list); + for (i = 0; i < args->mc_num; i++) + list_add_tail(&(args->mc[i].link), + &mcast->mcast_list); + /* add new mcasts */ + vfop->state = BNX2X_VFOP_MCAST_CHK_DONE; + vfop->rc = bnx2x_config_mcast(bp, mcast, + BNX2X_MCAST_CMD_ADD); + } + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); + + case BNX2X_VFOP_MCAST_CHK_DONE: + vfop->rc = raw->check_pending(raw) ? 1 : 0; + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); + default: + bnx2x_vfop_default(state); + } +op_err: + BNX2X_ERR("MCAST CONFIG error: rc %d\n", vfop->rc); +op_done: + kfree(args->mc); + bnx2x_vfop_end(bp, vf, vfop); +op_pending: + return; +} + +int bnx2x_vfop_mcast_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + bnx2x_mac_addr_t *mcasts, + int mcast_num, bool drv_only) +{ + struct bnx2x_vfop *vfop = NULL; + size_t mc_sz = mcast_num * sizeof(struct bnx2x_mcast_list_elem); + struct bnx2x_mcast_list_elem *mc = mc_sz ? kzalloc(mc_sz, GFP_KERNEL) : + NULL; + + if (!mc_sz || mc) { + vfop = bnx2x_vfop_add(bp, vf); + if (vfop) { + int i; + struct bnx2x_mcast_ramrod_params *ramrod = + &vf->op_params.mcast; + + /* set ramrod params */ + memset(ramrod, 0, sizeof(*ramrod)); + ramrod->mcast_obj = &vf->mcast_obj; + if (drv_only) + set_bit(RAMROD_DRV_CLR_ONLY, + &ramrod->ramrod_flags); + + /* copy mcasts pointers */ + vfop->args.mc_list.mc_num = mcast_num; + vfop->args.mc_list.mc = mc; + for (i = 0; i < mcast_num; i++) + mc[i].mac = mcasts[i]; + + bnx2x_vfop_opset(BNX2X_VFOP_MCAST_DEL, + bnx2x_vfop_mcast, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_mcast, + cmd->block); + } else { + kfree(mc); + } + } + return -ENOMEM; +} + +/* VFOP rx-mode */ +static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_rx_mode_ramrod_params *ramrod = &vfop->op_p->rx_mode; + enum bnx2x_vfop_rxmode_state state = vfop->state; + + bnx2x_vfop_reset_wq(vf); + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_RXMODE_CONFIG: + /* next state */ + vfop->state = BNX2X_VFOP_RXMODE_DONE; + + vfop->rc = bnx2x_config_rx_mode(bp, ramrod); + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); +op_err: + BNX2X_ERR("RXMODE error: rc %d\n", vfop->rc); +op_done: + case BNX2X_VFOP_RXMODE_DONE: + bnx2x_vfop_end(bp, vf, vfop); + return; + default: + bnx2x_vfop_default(state); + } +op_pending: + return; +} + +int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid, unsigned long accept_flags) +{ + struct bnx2x_vf_queue *vfq = vfq_get(vf, qid); + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_rx_mode_ramrod_params *ramrod = + &vf->op_params.rx_mode; + + memset(ramrod, 0, sizeof(*ramrod)); + + /* Prepare ramrod parameters */ + ramrod->cid = vfq->cid; + ramrod->cl_id = vfq_cl_id(vf, vfq); + ramrod->rx_mode_obj = &bp->rx_mode_obj; + ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid); + + ramrod->rx_accept_flags = accept_flags; + ramrod->tx_accept_flags = accept_flags; + ramrod->pstate = &vf->filter_state; + ramrod->state = BNX2X_FILTER_RX_MODE_PENDING; + + set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state); + set_bit(RAMROD_RX, &ramrod->ramrod_flags); + set_bit(RAMROD_TX, &ramrod->ramrod_flags); + + ramrod->rdata = + bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2); + ramrod->rdata_mapping = + bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2); + + bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG, + bnx2x_vfop_rxmode, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_rxmode, + cmd->block); + } + return -ENOMEM; +} + /* VF enable primitives * when pretend is required the caller is responsible * for calling pretend prior to calling these routines diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 49d452e..f75bd65 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -441,6 +441,10 @@ void bnx2x_iov_sp_task(struct bnx2x *bp); /* global vf mailbox routines */ void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event); void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid); + +/* CORE VF API */ +typedef u8 bnx2x_mac_addr_t[ETH_ALEN]; + /* acquire */ int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, struct vf_pf_resc_request *resc); @@ -615,11 +619,39 @@ void bnx2x_vfop_qctor_prep(struct bnx2x *bp, struct bnx2x_vf_queue *q, struct bnx2x_vfop_qctor_params *p, unsigned long q_type); +int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + struct bnx2x_vfop_filters *macs, + int qid, bool drv_only); + +int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid, u16 vid, bool add); + +int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + struct bnx2x_vfop_filters *vlans, + int qid, bool drv_only); + int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd, int qid); +int bnx2x_vfop_mcast_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + bnx2x_mac_addr_t *mcasts, + int mcast_num, bool drv_only); + +int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid, unsigned long accept_flags); + int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); /* VF FLR helpers */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 6605567..ad92bf4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -513,6 +513,280 @@ response: bnx2x_vf_mbx_resp(bp, vf); } +enum bnx2x_vfop_filters_state { + BNX2X_VFOP_MBX_Q_FILTERS_MACS, + BNX2X_VFOP_MBX_Q_FILTERS_VLANS, + BNX2X_VFOP_MBX_Q_FILTERS_RXMODE, + BNX2X_VFOP_MBX_Q_FILTERS_MCAST, + BNX2X_VFOP_MBX_Q_FILTERS_DONE +}; + +static int bnx2x_vf_mbx_macvlan_list(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct vfpf_set_q_filters_tlv *tlv, + struct bnx2x_vfop_filters **pfl, + u32 type_flag) +{ + int i, j; + struct bnx2x_vfop_filters *fl = NULL; + size_t fsz; + + fsz = tlv->n_mac_vlan_filters * sizeof(struct bnx2x_vfop_filter) + + sizeof(struct bnx2x_vfop_filters); + + fl = kzalloc(fsz, GFP_KERNEL); + if (!fl) + return -ENOMEM; + + INIT_LIST_HEAD(&fl->head); + + for (i = 0, j = 0; i < tlv->n_mac_vlan_filters; i++) { + struct vfpf_q_mac_vlan_filter *msg_filter = &tlv->filters[i]; + + if ((msg_filter->flags & type_flag) != type_flag) + continue; + if (type_flag == VFPF_Q_FILTER_DEST_MAC_VALID) { + fl->filters[j].mac = msg_filter->mac; + fl->filters[j].type = BNX2X_VFOP_FILTER_MAC; + } else { + fl->filters[j].vid = msg_filter->vlan_tag; + fl->filters[j].type = BNX2X_VFOP_FILTER_VLAN; + } + fl->filters[j].add = + (msg_filter->flags & VFPF_Q_FILTER_SET_MAC) ? + true : false; + list_add_tail(&fl->filters[j++].link, &fl->head); + } + if (list_empty(&fl->head)) + kfree(fl); + else + *pfl = fl; + + return 0; +} + +static void bnx2x_vf_mbx_dp_q_filter(struct bnx2x *bp, int msglvl, int idx, + struct vfpf_q_mac_vlan_filter *filter) +{ + DP(msglvl, "MAC-VLAN[%d] -- flags=0x%x\n", idx, filter->flags); + if (filter->flags & VFPF_Q_FILTER_VLAN_TAG_VALID) + DP_CONT(msglvl, ", vlan=%d", filter->vlan_tag); + if (filter->flags & VFPF_Q_FILTER_DEST_MAC_VALID) + DP_CONT(msglvl, ", MAC=%pM", filter->mac); + DP_CONT(msglvl, "\n"); +} + +static void bnx2x_vf_mbx_dp_q_filters(struct bnx2x *bp, int msglvl, + struct vfpf_set_q_filters_tlv *filters) +{ + int i; + + if (filters->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) + for (i = 0; i < filters->n_mac_vlan_filters; i++) + bnx2x_vf_mbx_dp_q_filter(bp, msglvl, i, + &filters->filters[i]); + + if (filters->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) + DP(msglvl, "RX-MASK=0x%x\n", filters->rx_mask); + + if (filters->flags & VFPF_SET_Q_FILTERS_MULTICAST_CHANGED) + for (i = 0; i < filters->n_multicast; i++) + DP(msglvl, "MULTICAST=%pM\n", filters->multicast[i]); +} + +#define VFPF_MAC_FILTER VFPF_Q_FILTER_DEST_MAC_VALID +#define VFPF_VLAN_FILTER VFPF_Q_FILTER_VLAN_TAG_VALID + +static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int rc; + + struct vfpf_set_q_filters_tlv *msg = + &BP_VF_MBX(bp, vf->index)->msg->req.set_q_filters; + + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + enum bnx2x_vfop_filters_state state = vfop->state; + + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vfop_mbx_qfilters, + .block = false, + }; + + DP(BNX2X_MSG_IOV, "STATE: %d\n", state); + + if (vfop->rc < 0) + goto op_err; + + switch (state) { + case BNX2X_VFOP_MBX_Q_FILTERS_MACS: + /* next state */ + vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_VLANS; + + /* check for any vlan/mac changes */ + if (msg->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) { + /* build mac list */ + struct bnx2x_vfop_filters *fl = NULL; + + vfop->rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl, + VFPF_MAC_FILTER); + if (vfop->rc) + goto op_err; + + if (fl) { + /* set mac list */ + rc = bnx2x_vfop_mac_list_cmd(bp, vf, &cmd, fl, + msg->vf_qid, + false); + if (rc) { + vfop->rc = rc; + goto op_err; + } + return; + } + } + /* fall through */ + + case BNX2X_VFOP_MBX_Q_FILTERS_VLANS: + /* next state */ + vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_RXMODE; + + /* check for any vlan/mac changes */ + if (msg->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) { + /* build vlan list */ + struct bnx2x_vfop_filters *fl = NULL; + + vfop->rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl, + VFPF_VLAN_FILTER); + if (vfop->rc) + goto op_err; + + if (fl) { + /* set vlan list */ + rc = bnx2x_vfop_vlan_list_cmd(bp, vf, &cmd, fl, + msg->vf_qid, + false); + if (rc) { + vfop->rc = rc; + goto op_err; + } + return; + } + } + /* fall through */ + + case BNX2X_VFOP_MBX_Q_FILTERS_RXMODE: + /* next state */ + vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_MCAST; + + if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) { + unsigned long accept = 0; + + /* covert VF-PF if mask to bnx2x accept flags */ + if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST) + __set_bit(BNX2X_ACCEPT_UNICAST, &accept); + + if (msg->rx_mask & + VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST) + __set_bit(BNX2X_ACCEPT_MULTICAST, &accept); + + if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_UNICAST) + __set_bit(BNX2X_ACCEPT_ALL_UNICAST, &accept); + + if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_ALL_MULTICAST) + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept); + + if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_BROADCAST) + __set_bit(BNX2X_ACCEPT_BROADCAST, &accept); + + /* A packet arriving the vf's mac should be accepted + * with any vlan + */ + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept); + + /* set rx-mode */ + rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd, + msg->vf_qid, accept); + if (rc) { + vfop->rc = rc; + goto op_err; + } + return; + } + /* fall through */ + + case BNX2X_VFOP_MBX_Q_FILTERS_MCAST: + /* next state */ + vfop->state = BNX2X_VFOP_MBX_Q_FILTERS_DONE; + + if (msg->flags & VFPF_SET_Q_FILTERS_MULTICAST_CHANGED) { + /* set mcasts */ + rc = bnx2x_vfop_mcast_cmd(bp, vf, &cmd, msg->multicast, + msg->n_multicast, false); + if (rc) { + vfop->rc = rc; + goto op_err; + } + return; + } + /* fall through */ +op_done: + case BNX2X_VFOP_MBX_Q_FILTERS_DONE: + bnx2x_vfop_end(bp, vf, vfop); + return; +op_err: + BNX2X_ERR("QFILTERS[%d:%d] error: rc %d\n", + vf->abs_vfid, msg->vf_qid, vfop->rc); + goto op_done; + + default: + bnx2x_vfop_default(state); + } +} + +static int bnx2x_vfop_mbx_qfilters_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + if (vfop) { + bnx2x_vfop_opset(BNX2X_VFOP_MBX_Q_FILTERS_MACS, + bnx2x_vfop_mbx_qfilters, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_mbx_qfilters, + cmd->block); + } + return -ENOMEM; +} + +static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct vfpf_set_q_filters_tlv *filters = &mbx->msg->req.set_q_filters; + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vf_mbx_resp, + .block = false, + }; + + /* verify vf_qid */ + if (filters->vf_qid > vf_rxq_count(vf)) + goto response; + + DP(BNX2X_MSG_IOV, "VF[%d] Q_FILTERS: queue[%d]\n", + vf->abs_vfid, + filters->vf_qid); + + /* print q_filter message */ + bnx2x_vf_mbx_dp_q_filters(bp, BNX2X_MSG_IOV, filters); + + vf->op_rc = bnx2x_vfop_mbx_qfilters_cmd(bp, vf, &cmd); + if (vf->op_rc) + goto response; + return; + +response: + bnx2x_vf_mbx_resp(bp, vf); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -537,6 +811,9 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, case CHANNEL_TLV_SETUP_Q: bnx2x_vf_mbx_setup_q(bp, vf, mbx); break; + case CHANNEL_TLV_SET_Q_FILTERS: + bnx2x_vf_mbx_set_q_filters(bp, vf, mbx); + break; } } else { /* unknown TLV - this may belong to a VF driver from the future -- cgit v0.10.2 From 463a68a7734db3975c0d1c748f5fde713eb9a5b9 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:39 +0000 Subject: bnx2x: Support of PF driver of a VF q_teardown request The 'q_teardown' request is basically the opposite of the 'q_setup'. Here the PF driver removes from the device the queue it opened against the VF fastpath ring at 'setup_q' stage, along with all related rx_mode info. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index e63925c..9fd43c0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -111,6 +111,13 @@ enum bnx2x_vfop_qctor_state { BNX2X_VFOP_QCTOR_INT_EN }; +enum bnx2x_vfop_qdtor_state { + BNX2X_VFOP_QDTOR_HALT, + BNX2X_VFOP_QDTOR_TERMINATE, + BNX2X_VFOP_QDTOR_CFCDEL, + BNX2X_VFOP_QDTOR_DONE +}; + enum bnx2x_vfop_vlan_mac_state { BNX2X_VFOP_VLAN_MAC_CONFIG_SINGLE, BNX2X_VFOP_VLAN_MAC_CLEAR, @@ -137,6 +144,14 @@ enum bnx2x_vfop_rxmode_state { BNX2X_VFOP_RXMODE_DONE }; +enum bnx2x_vfop_qteardown_state { + BNX2X_VFOP_QTEARDOWN_RXMODE, + BNX2X_VFOP_QTEARDOWN_CLR_VLAN, + BNX2X_VFOP_QTEARDOWN_CLR_MAC, + BNX2X_VFOP_QTEARDOWN_QDTOR, + BNX2X_VFOP_QTEARDOWN_DONE +}; + #define bnx2x_vfop_reset_wq(vf) atomic_set(&vf->op_in_progress, 0) void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf, @@ -342,6 +357,101 @@ static int bnx2x_vfop_qctor_cmd(struct bnx2x *bp, return -ENOMEM; } +/* VFOP queue destruction */ +static void bnx2x_vfop_qdtor(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_vfop_args_qdtor *qdtor = &vfop->args.qdtor; + struct bnx2x_queue_state_params *q_params = &vfop->op_p->qctor.qstate; + enum bnx2x_vfop_qdtor_state state = vfop->state; + + bnx2x_vfop_reset_wq(vf); + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_QDTOR_HALT: + + /* has this queue already been stopped? */ + if (bnx2x_get_q_logical_state(bp, q_params->q_obj) == + BNX2X_Q_LOGICAL_STATE_STOPPED) { + DP(BNX2X_MSG_IOV, + "Entered qdtor but queue was already stopped. Aborting gracefully\n"); + goto op_done; + } + + /* next state */ + vfop->state = BNX2X_VFOP_QDTOR_TERMINATE; + + q_params->cmd = BNX2X_Q_CMD_HALT; + vfop->rc = bnx2x_queue_state_change(bp, q_params); + + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT); + + case BNX2X_VFOP_QDTOR_TERMINATE: + /* next state */ + vfop->state = BNX2X_VFOP_QDTOR_CFCDEL; + + q_params->cmd = BNX2X_Q_CMD_TERMINATE; + vfop->rc = bnx2x_queue_state_change(bp, q_params); + + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_CONT); + + case BNX2X_VFOP_QDTOR_CFCDEL: + /* next state */ + vfop->state = BNX2X_VFOP_QDTOR_DONE; + + q_params->cmd = BNX2X_Q_CMD_CFC_DEL; + vfop->rc = bnx2x_queue_state_change(bp, q_params); + + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); +op_err: + BNX2X_ERR("QDTOR[%d:%d] error: cmd %d, rc %d\n", + vf->abs_vfid, qdtor->qid, q_params->cmd, vfop->rc); +op_done: + case BNX2X_VFOP_QDTOR_DONE: + /* invalidate the context */ + qdtor->cxt->ustorm_ag_context.cdu_usage = 0; + qdtor->cxt->xstorm_ag_context.cdu_reserved = 0; + bnx2x_vfop_end(bp, vf, vfop); + return; + default: + bnx2x_vfop_default(state); + } +op_pending: + return; +} + +static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_queue_state_params *qstate = + &vf->op_params.qctor.qstate; + + memset(qstate, 0, sizeof(*qstate)); + qstate->q_obj = &bnx2x_vfq(vf, qid, sp_obj); + + vfop->args.qdtor.qid = qid; + vfop->args.qdtor.cxt = bnx2x_vfq(vf, qid, cxt); + + bnx2x_vfop_opset(BNX2X_VFOP_QDTOR_HALT, + bnx2x_vfop_qdtor, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor, + cmd->block); + } + DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop. rc %d\n", + vf->abs_vfid, vfop->rc); + return -ENOMEM; +} + static void bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid) { @@ -593,6 +703,44 @@ bnx2x_vfop_mac_prep_ramrod(struct bnx2x_vlan_mac_ramrod_params *ramrod, set_bit(BNX2X_ETH_MAC, &ramrod->user_req.vlan_mac_flags); } +static int bnx2x_vfop_mac_delall_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid, bool drv_only) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_vfop_args_filters filters = { + .multi_filter = NULL, /* single */ + .credit = NULL, /* consume credit */ + }; + struct bnx2x_vfop_vlan_mac_flags flags = { + .drv_only = drv_only, + .dont_consume = (filters.credit != NULL), + .single_cmd = true, + .add = false /* don't care */, + }; + struct bnx2x_vlan_mac_ramrod_params *ramrod = + &vf->op_params.vlan_mac; + + /* set ramrod params */ + bnx2x_vfop_mac_prep_ramrod(ramrod, &flags); + + /* set object */ + ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj); + + /* set extra args */ + vfop->args.filters = filters; + + bnx2x_vfop_opset(BNX2X_VFOP_VLAN_MAC_CLEAR, + bnx2x_vfop_vlan_mac, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac, + cmd->block); + } + return -ENOMEM; +} + int bnx2x_vfop_mac_list_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd, @@ -675,6 +823,44 @@ int bnx2x_vfop_vlan_set_cmd(struct bnx2x *bp, return -ENOMEM; } +static int bnx2x_vfop_vlan_delall_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid, bool drv_only) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + struct bnx2x_vfop_args_filters filters = { + .multi_filter = NULL, /* single command */ + .credit = &bnx2x_vfq(vf, qid, vlan_count), + }; + struct bnx2x_vfop_vlan_mac_flags flags = { + .drv_only = drv_only, + .dont_consume = (filters.credit != NULL), + .single_cmd = true, + .add = false, /* don't care */ + }; + struct bnx2x_vlan_mac_ramrod_params *ramrod = + &vf->op_params.vlan_mac; + + /* set ramrod params */ + bnx2x_vfop_vlan_mac_prep_ramrod(ramrod, &flags); + + /* set object */ + ramrod->vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj); + + /* set extra args */ + vfop->args.filters = filters; + + bnx2x_vfop_opset(BNX2X_VFOP_VLAN_MAC_CLEAR, + bnx2x_vfop_vlan_mac, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_vlan_mac, + cmd->block); + } + return -ENOMEM; +} + int bnx2x_vfop_vlan_list_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd, @@ -956,6 +1142,89 @@ int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp, return -ENOMEM; } +/* VFOP queue tear-down ('drop all' rx-mode, clear vlans, clear macs, + * queue destructor) + */ +static void bnx2x_vfop_qdown(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + int qid = vfop->args.qx.qid; + enum bnx2x_vfop_qteardown_state state = vfop->state; + struct bnx2x_vfop_cmd cmd; + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + cmd.done = bnx2x_vfop_qdown; + cmd.block = false; + + switch (state) { + case BNX2X_VFOP_QTEARDOWN_RXMODE: + /* Drop all */ + vfop->state = BNX2X_VFOP_QTEARDOWN_CLR_VLAN; + vfop->rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd, qid, 0); + if (vfop->rc) + goto op_err; + return; + + case BNX2X_VFOP_QTEARDOWN_CLR_VLAN: + /* vlan-clear-all: don't consume credit */ + vfop->state = BNX2X_VFOP_QTEARDOWN_CLR_MAC; + vfop->rc = bnx2x_vfop_vlan_delall_cmd(bp, vf, &cmd, qid, false); + if (vfop->rc) + goto op_err; + return; + + case BNX2X_VFOP_QTEARDOWN_CLR_MAC: + /* mac-clear-all: consume credit */ + vfop->state = BNX2X_VFOP_QTEARDOWN_QDTOR; + vfop->rc = bnx2x_vfop_mac_delall_cmd(bp, vf, &cmd, qid, false); + if (vfop->rc) + goto op_err; + return; + + case BNX2X_VFOP_QTEARDOWN_QDTOR: + /* run the queue destruction flow */ + DP(BNX2X_MSG_IOV, "case: BNX2X_VFOP_QTEARDOWN_QDTOR\n"); + vfop->state = BNX2X_VFOP_QTEARDOWN_DONE; + DP(BNX2X_MSG_IOV, "new state: BNX2X_VFOP_QTEARDOWN_DONE\n"); + vfop->rc = bnx2x_vfop_qdtor_cmd(bp, vf, &cmd, qid); + DP(BNX2X_MSG_IOV, "returned from cmd\n"); + if (vfop->rc) + goto op_err; + return; +op_err: + BNX2X_ERR("QTEARDOWN[%d:%d] error: rc %d\n", + vf->abs_vfid, qid, vfop->rc); + + case BNX2X_VFOP_QTEARDOWN_DONE: + bnx2x_vfop_end(bp, vf, vfop); + return; + default: + bnx2x_vfop_default(state); + } +} + +int bnx2x_vfop_qdown_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + vfop->args.qx.qid = qid; + bnx2x_vfop_opset(BNX2X_VFOP_QTEARDOWN_RXMODE, + bnx2x_vfop_qdown, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdown, + cmd->block); + } + + return -ENOMEM; +} + /* VF enable primitives * when pretend is required the caller is responsible * for calling pretend prior to calling these routines diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index f75bd65..9f0099c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -641,6 +641,11 @@ int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp, struct bnx2x_vfop_cmd *cmd, int qid); +int bnx2x_vfop_qdown_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid); + int bnx2x_vfop_mcast_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index ad92bf4..af30eb4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -787,6 +787,23 @@ response: bnx2x_vf_mbx_resp(bp, vf); } +static void bnx2x_vf_mbx_teardown_q(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int qid = mbx->msg->req.q_op.vf_qid; + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vf_mbx_resp, + .block = false, + }; + + DP(BNX2X_MSG_IOV, "VF[%d] Q_TEARDOWN: vf_qid=%d\n", + vf->abs_vfid, qid); + + vf->op_rc = bnx2x_vfop_qdown_cmd(bp, vf, &cmd, qid); + if (vf->op_rc) + bnx2x_vf_mbx_resp(bp, vf); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -814,7 +831,11 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, case CHANNEL_TLV_SET_Q_FILTERS: bnx2x_vf_mbx_set_q_filters(bp, vf, mbx); break; + case CHANNEL_TLV_TEARDOWN_Q: + bnx2x_vf_mbx_teardown_q(bp, vf, mbx); + break; } + } else { /* unknown TLV - this may belong to a VF driver from the future * - a version written after this PF driver was written, which -- cgit v0.10.2 From 99e9d211a40cdd12bda7f50c2014c2fbb8f386f5 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:40 +0000 Subject: bnx2x: Support of PF driver of a VF close request The 'close' command is the opposite of an init request. Here the queues of the VF are closed (if any are opened) and released. This flow applies the 'q_teardown' flow on all the queues. The VF state is changed by this request. Interrupts are disabled for the VF when closed. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 9fd43c0..3dd3a6a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -139,6 +139,11 @@ enum bnx2x_vfop_mcast_state { BNX2X_VFOP_MCAST_CHK_DONE }; +enum bnx2x_vfop_close_state { + BNX2X_VFOP_CLOSE_QUEUES, + BNX2X_VFOP_CLOSE_HW +}; + enum bnx2x_vfop_rxmode_state { BNX2X_VFOP_RXMODE_CONFIG, BNX2X_VFOP_RXMODE_DONE @@ -2300,6 +2305,28 @@ static void bnx2x_vf_qtbl_set_q(struct bnx2x *bp, u8 abs_vfid, u8 qid, REG_WR(bp, reg, val); } +static void bnx2x_vf_clr_qtbl(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int i; + + for_each_vfq(vf, i) + bnx2x_vf_qtbl_set_q(bp, vf->abs_vfid, + vfq_qzone_id(vf, vfq_get(vf, i)), false); +} + +static void bnx2x_vf_igu_disable(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + u32 val; + + /* clear the VF configuration - pretend */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + val = REG_RD(bp, IGU_REG_VF_CONFIGURATION); + val &= ~(IGU_VF_CONF_MSI_MSIX_EN | IGU_VF_CONF_SINGLE_ISR_EN | + IGU_VF_CONF_FUNC_EN | IGU_VF_CONF_PARENT_MASK); + REG_WR(bp, IGU_REG_VF_CONFIGURATION, val); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf) { return min_t(u8, min_t(u8, vf_sb_count(vf), BNX2X_CIDS_PER_VF), @@ -2469,6 +2496,76 @@ int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, dma_addr_t *sb_map) return 0; } +/* VFOP close (teardown the queues, delete mcasts and close HW) */ +static void bnx2x_vfop_close(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_vfop_args_qx *qx = &vfop->args.qx; + enum bnx2x_vfop_close_state state = vfop->state; + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vfop_close, + .block = false, + }; + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_CLOSE_QUEUES: + + if (++(qx->qid) < vf_rxq_count(vf)) { + vfop->rc = bnx2x_vfop_qdown_cmd(bp, vf, &cmd, qx->qid); + if (vfop->rc) + goto op_err; + return; + } + + /* remove multicasts */ + vfop->state = BNX2X_VFOP_CLOSE_HW; + vfop->rc = bnx2x_vfop_mcast_cmd(bp, vf, &cmd, NULL, 0, false); + if (vfop->rc) + goto op_err; + return; + + case BNX2X_VFOP_CLOSE_HW: + + /* disable the interrupts */ + DP(BNX2X_MSG_IOV, "disabling igu\n"); + bnx2x_vf_igu_disable(bp, vf); + + /* disable the VF */ + DP(BNX2X_MSG_IOV, "clearing qtbl\n"); + bnx2x_vf_clr_qtbl(bp, vf); + + goto op_done; + default: + bnx2x_vfop_default(state); + } +op_err: + BNX2X_ERR("VF[%d] CLOSE error: rc %d\n", vf->abs_vfid, vfop->rc); +op_done: + vf->state = VF_ACQUIRED; + DP(BNX2X_MSG_IOV, "set state to acquired\n"); + bnx2x_vfop_end(bp, vf, vfop); +} + +int bnx2x_vfop_close_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + if (vfop) { + vfop->args.qx.qid = -1; /* loop */ + bnx2x_vfop_opset(BNX2X_VFOP_CLOSE_QUEUES, + bnx2x_vfop_close, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_close, + cmd->block); + } + return -ENOMEM; +} + void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, enum channel_tlvs tlv) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 9f0099c..d2a65d6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -657,6 +657,10 @@ int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp, struct bnx2x_vfop_cmd *cmd, int qid, unsigned long accept_flags); +int bnx2x_vfop_close_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd); + int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); /* VF FLR helpers */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index af30eb4..73368aa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -804,6 +804,21 @@ static void bnx2x_vf_mbx_teardown_q(struct bnx2x *bp, struct bnx2x_virtf *vf, bnx2x_vf_mbx_resp(bp, vf); } +static void bnx2x_vf_mbx_close_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vf_mbx_resp, + .block = false, + }; + + DP(BNX2X_MSG_IOV, "VF[%d] VF_CLOSE\n", vf->abs_vfid); + + vf->op_rc = bnx2x_vfop_close_cmd(bp, vf, &cmd); + if (vf->op_rc) + bnx2x_vf_mbx_resp(bp, vf); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -834,6 +849,9 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, case CHANNEL_TLV_TEARDOWN_Q: bnx2x_vf_mbx_teardown_q(bp, vf, mbx); break; + case CHANNEL_TLV_CLOSE: + bnx2x_vf_mbx_close_vf(bp, vf, mbx); + break; } } else { -- cgit v0.10.2 From f1929b016c2161c364e45c21788aaae938ae557c Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:41 +0000 Subject: bnx2x: Support of PF driver of a VF release request The 'release' request is the opposite of the 'acquire' request. At release, all the resources allocated to the VF are reclaimed. The release flow applies the close flow if applicable. Note that there are actually two types of release: 1. The VF has been removed, and so issued a 'release' request over the VF <-> PF Channel. 2. The PF is going down and so has to release all of it's VFs. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6f21a09..249ba70 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8626,6 +8626,7 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) netif_addr_unlock_bh(bp->dev); + bnx2x_iov_chip_cleanup(bp); /* diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 3dd3a6a..71d0976 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1422,6 +1422,14 @@ bnx2x_iov_static_resc(struct bnx2x *bp, struct vf_pf_resc_request *resc) /* num_sbs already set */ } +/* FLR routines: */ +static void bnx2x_vf_free_resc(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + /* reset the state variables */ + bnx2x_iov_static_resc(bp, &vf->alloc_resc); + vf->state = VF_FREE; +} + /* IOV global initialization routines */ void bnx2x_iov_init_dq(struct bnx2x *bp) { @@ -1947,6 +1955,21 @@ int bnx2x_iov_nic_init(struct bnx2x *bp) return 0; } +/* called by bnx2x_chip_cleanup */ +int bnx2x_iov_chip_cleanup(struct bnx2x *bp) +{ + int i; + + if (!IS_SRIOV(bp)) + return 0; + + /* release all the VFs */ + for_each_vf(bp, i) + bnx2x_vf_release(bp, BP_VF(bp, i), true); /* blocking */ + + return 0; +} + /* called by bnx2x_init_hw_func, returns the next ilt line */ int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) { @@ -2566,6 +2589,106 @@ int bnx2x_vfop_close_cmd(struct bnx2x *bp, return -ENOMEM; } +/* VF release can be called either: 1. the VF was acquired but + * not enabled 2. the vf was enabled or in the process of being + * enabled + */ +static void bnx2x_vfop_release(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vfop_release, + .block = false, + }; + + DP(BNX2X_MSG_IOV, "vfop->rc %d\n", vfop->rc); + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "VF[%d] STATE: %s\n", vf->abs_vfid, + vf->state == VF_FREE ? "Free" : + vf->state == VF_ACQUIRED ? "Acquired" : + vf->state == VF_ENABLED ? "Enabled" : + vf->state == VF_RESET ? "Reset" : + "Unknown"); + + switch (vf->state) { + case VF_ENABLED: + vfop->rc = bnx2x_vfop_close_cmd(bp, vf, &cmd); + if (vfop->rc) + goto op_err; + return; + + case VF_ACQUIRED: + DP(BNX2X_MSG_IOV, "about to free resources\n"); + bnx2x_vf_free_resc(bp, vf); + DP(BNX2X_MSG_IOV, "vfop->rc %d\n", vfop->rc); + goto op_done; + + case VF_FREE: + case VF_RESET: + /* do nothing */ + goto op_done; + default: + bnx2x_vfop_default(vf->state); + } +op_err: + BNX2X_ERR("VF[%d] RELEASE error: rc %d\n", vf->abs_vfid, vfop->rc); +op_done: + bnx2x_vfop_end(bp, vf, vfop); +} + +int bnx2x_vfop_release_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + if (vfop) { + bnx2x_vfop_opset(-1, /* use vf->state */ + bnx2x_vfop_release, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_release, + cmd->block); + } + return -ENOMEM; +} + +/* VF release ~ VF close + VF release-resources + * Release is the ultimate SW shutdown and is called whenever an + * irrecoverable error is encountered. + */ +void bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf, bool block) +{ + struct bnx2x_vfop_cmd cmd = { + .done = NULL, + .block = block, + }; + int rc; + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF); + + rc = bnx2x_vfop_release_cmd(bp, vf, &cmd); + if (rc) + WARN(rc, + "VF[%d] Failed to allocate resources for release op- rc=%d\n", + vf->abs_vfid, rc); +} + +static inline void bnx2x_vf_get_sbdf(struct bnx2x *bp, + struct bnx2x_virtf *vf, u32 *sbdf) +{ + *sbdf = vf->devfn | (vf->bus << 8); +} + +static inline void bnx2x_vf_get_bars(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_bar_info *bar_info) +{ + int n; + + bar_info->nr_bars = bp->vfdb->sriov.nres; + for (n = 0; n < bar_info->nr_bars; n++) + bar_info->bars[n] = vf->bars[n]; +} + void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, enum channel_tlvs tlv) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index d2a65d6..a09db28 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -51,6 +51,11 @@ struct bnx2x_vf_bar { u32 size; }; +struct bnx2x_vf_bar_info { + struct bnx2x_vf_bar bars[PCI_SRIOV_NUM_BARS]; + u8 nr_bars; +}; + /* vf queue (used both for rx or tx) */ struct bnx2x_vf_queue { struct eth_context *cxt; @@ -429,6 +434,7 @@ void bnx2x_iov_remove_one(struct bnx2x *bp); void bnx2x_iov_free_mem(struct bnx2x *bp); int bnx2x_iov_alloc_mem(struct bnx2x *bp); int bnx2x_iov_nic_init(struct bnx2x *bp); +int bnx2x_iov_chip_cleanup(struct bnx2x *bp); void bnx2x_iov_init_dq(struct bnx2x *bp); void bnx2x_iov_init_dmae(struct bnx2x *bp); void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, @@ -546,6 +552,11 @@ static inline void bnx2x_vfop_end(struct bnx2x *bp, struct bnx2x_virtf *vf, if (vfop->done) { DP(BNX2X_MSG_IOV, "calling done handler\n"); vfop->done(bp, vf); + } else { + /* there is no done handler for the operation to unlock + * the mutex. Must have gotten here from PF initiated VF RELEASE + */ + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF); } DP(BNX2X_MSG_IOV, "done handler complete. vf->op_rc %d, vfop->rc %d\n", @@ -661,6 +672,16 @@ int bnx2x_vfop_close_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd); +int bnx2x_vfop_release_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd); + +/* VF release ~ VF close + VF release-resources + * + * Release is the ultimate SW shutdown and is called whenever an + * irrecoverable error is encountered. + */ +void bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf, bool block); int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); /* VF FLR helpers */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 73368aa..ba8b95d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -228,7 +228,7 @@ static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf) if (rc) { BNX2X_ERR("Failed to copy response body to VF %d\n", vf->abs_vfid); - return; + goto mbx_error; } vf_addr -= sizeof(u64); pf_addr -= sizeof(u64); @@ -255,8 +255,12 @@ static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf) if (rc) { BNX2X_ERR("Failed to copy response status to VF %d\n", vf->abs_vfid); + goto mbx_error; } return; + +mbx_error: + bnx2x_vf_release(bp, vf, false); /* non blocking */ } static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf, @@ -819,6 +823,21 @@ static void bnx2x_vf_mbx_close_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, bnx2x_vf_mbx_resp(bp, vf); } +static void bnx2x_vf_mbx_release_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vf_mbx_resp, + .block = false, + }; + + DP(BNX2X_MSG_IOV, "VF[%d] VF_RELEASE\n", vf->abs_vfid); + + vf->op_rc = bnx2x_vfop_release_cmd(bp, vf, &cmd); + if (vf->op_rc) + bnx2x_vf_mbx_resp(bp, vf); +} + /* dispatch request */ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vf_mbx *mbx) @@ -852,6 +871,9 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, case CHANNEL_TLV_CLOSE: bnx2x_vf_mbx_close_vf(bp, vf, mbx); break; + case CHANNEL_TLV_RELEASE: + bnx2x_vf_mbx_release_vf(bp, vf, mbx); + break; } } else { @@ -942,6 +964,7 @@ void bnx2x_vf_mbx(struct bnx2x *bp, struct vf_pf_event_data *vfpf_event) goto mbx_done; mbx_error: + bnx2x_vf_release(bp, vf, false); /* non blocking */ mbx_done: return; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index bf11e08..6278a9e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -310,6 +310,7 @@ enum channel_tlvs { CHANNEL_TLV_TEARDOWN_Q, CHANNEL_TLV_CLOSE, CHANNEL_TLV_RELEASE, + CHANNEL_TLV_PF_RELEASE_VF, CHANNEL_TLV_LIST_END, CHANNEL_TLV_MAX }; -- cgit v0.10.2 From d16132cef8a72ff7563aff95f03bf505779fe3e6 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:42 +0000 Subject: bnx2x: Support VF FLR The FLR indication arrives as an attention from the management processor. Upon VF flr all FLRed function in the indication have already been released by Firmware and now we basically need to free the resources allocated to those VFs, and clean any remainders from the device (FLR final cleanup). Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index fbe8be3..2431ffd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1879,7 +1879,13 @@ void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae); void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae, int msglvl); +/* FLR related routines */ +u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp); +void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count); +int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt); u8 bnx2x_is_pcie_pending(struct pci_dev *dev); +int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt); void bnx2x_calc_fc_adv(struct bnx2x *bp); int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 249ba70..00c110e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1097,8 +1097,8 @@ static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, return val; } -static int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, - char *msg, u32 poll_cnt) +int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt) { u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt); if (val != 0) { @@ -1108,7 +1108,8 @@ static int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, return 0; } -static u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) +/* Common routines with VF FLR cleanup */ +u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) { /* adjust polling timeout */ if (CHIP_REV_IS_EMUL(bp)) @@ -1120,7 +1121,7 @@ static u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) return FLR_POLL_CNT; } -static void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) +void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) { struct pbf_pN_cmd_regs cmd_regs[] = { {0, (CHIP_IS_E3B0(bp)) ? @@ -1195,8 +1196,7 @@ static void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX) -static int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, - u32 poll_cnt) +int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) { struct sdm_op_gen op_gen = {0}; @@ -1221,7 +1221,8 @@ static int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, BNX2X_ERR("FW final cleanup did not succeed\n"); DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n", (REG_RD(bp, comp_addr))); - ret = 1; + bnx2x_panic(); + return 1; } /* Zero completion for nxt FLR */ REG_WR(bp, comp_addr, 0); @@ -3904,6 +3905,10 @@ static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) if (val & DRV_STATUS_DRV_INFO_REQ) bnx2x_handle_drv_info_req(bp); + + if (val & DRV_STATUS_VF_DISABLED) + bnx2x_vf_handle_flr_event(bp); + if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF)) bnx2x_pmf_update(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 1008d3f..a015965 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -876,6 +876,7 @@ #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) #define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1<<0) +#define DORQ_REG_VF_USAGE_CNT 0x170320 #define HC_REG_AGG_INT_0 0x108050 #define HC_REG_AGG_INT_1 0x108054 #define HC_REG_ATTN_BIT 0x108120 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 71d0976..c96ce5b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -138,6 +138,17 @@ enum bnx2x_vfop_mcast_state { BNX2X_VFOP_MCAST_ADD, BNX2X_VFOP_MCAST_CHK_DONE }; +enum bnx2x_vfop_qflr_state { + BNX2X_VFOP_QFLR_CLR_VLAN, + BNX2X_VFOP_QFLR_CLR_MAC, + BNX2X_VFOP_QFLR_TERMINATE, + BNX2X_VFOP_QFLR_DONE +}; + +enum bnx2x_vfop_flr_state { + BNX2X_VFOP_FLR_QUEUES, + BNX2X_VFOP_FLR_HW +}; enum bnx2x_vfop_close_state { BNX2X_VFOP_CLOSE_QUEUES, @@ -973,6 +984,94 @@ int bnx2x_vfop_qsetup_cmd(struct bnx2x *bp, return -ENOMEM; } +/* VFOP queue FLR handling (clear vlans, clear macs, queue destructor) */ +static void bnx2x_vfop_qflr(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + int qid = vfop->args.qx.qid; + enum bnx2x_vfop_qflr_state state = vfop->state; + struct bnx2x_queue_state_params *qstate; + struct bnx2x_vfop_cmd cmd; + + bnx2x_vfop_reset_wq(vf); + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "VF[%d] STATE: %d\n", vf->abs_vfid, state); + + cmd.done = bnx2x_vfop_qflr; + cmd.block = false; + + switch (state) { + case BNX2X_VFOP_QFLR_CLR_VLAN: + /* vlan-clear-all: driver-only, don't consume credit */ + vfop->state = BNX2X_VFOP_QFLR_CLR_MAC; + vfop->rc = bnx2x_vfop_vlan_delall_cmd(bp, vf, &cmd, qid, true); + if (vfop->rc) + goto op_err; + return; + + case BNX2X_VFOP_QFLR_CLR_MAC: + /* mac-clear-all: driver only consume credit */ + vfop->state = BNX2X_VFOP_QFLR_TERMINATE; + vfop->rc = bnx2x_vfop_mac_delall_cmd(bp, vf, &cmd, qid, true); + DP(BNX2X_MSG_IOV, + "VF[%d] vfop->rc after bnx2x_vfop_mac_delall_cmd was %d", + vf->abs_vfid, vfop->rc); + if (vfop->rc) + goto op_err; + return; + + case BNX2X_VFOP_QFLR_TERMINATE: + qstate = &vfop->op_p->qctor.qstate; + memset(qstate , 0, sizeof(*qstate)); + qstate->q_obj = &bnx2x_vfq(vf, qid, sp_obj); + vfop->state = BNX2X_VFOP_QFLR_DONE; + + DP(BNX2X_MSG_IOV, "VF[%d] qstate during flr was %d\n", + vf->abs_vfid, qstate->q_obj->state); + + if (qstate->q_obj->state != BNX2X_Q_STATE_RESET) { + qstate->q_obj->state = BNX2X_Q_STATE_STOPPED; + qstate->cmd = BNX2X_Q_CMD_TERMINATE; + vfop->rc = bnx2x_queue_state_change(bp, qstate); + bnx2x_vfop_finalize(vf, vfop->rc, VFOP_VERIFY_PEND); + } else { + goto op_done; + } + +op_err: + BNX2X_ERR("QFLR[%d:%d] error: rc %d\n", + vf->abs_vfid, qid, vfop->rc); +op_done: + case BNX2X_VFOP_QFLR_DONE: + bnx2x_vfop_end(bp, vf, vfop); + return; + default: + bnx2x_vfop_default(state); + } +op_pending: + return; +} + +static int bnx2x_vfop_qflr_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vfop_cmd *cmd, + int qid) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + + if (vfop) { + vfop->args.qx.qid = qid; + bnx2x_vfop_opset(BNX2X_VFOP_QFLR_CLR_VLAN, + bnx2x_vfop_qflr, cmd->done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qflr, + cmd->block); + } + return -ENOMEM; +} + /* VFOP multi-casts */ static void bnx2x_vfop_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf) { @@ -1430,6 +1529,201 @@ static void bnx2x_vf_free_resc(struct bnx2x *bp, struct bnx2x_virtf *vf) vf->state = VF_FREE; } +static void bnx2x_vf_flr_clnup_hw(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); + + /* DQ usage counter */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + bnx2x_flr_clnup_poll_hw_counter(bp, DORQ_REG_VF_USAGE_CNT, + "DQ VF usage counter timed out", + poll_cnt); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + /* FW cleanup command - poll for the results */ + if (bnx2x_send_final_clnup(bp, (u8)FW_VF_HANDLE(vf->abs_vfid), + poll_cnt)) + BNX2X_ERR("VF[%d] Final cleanup timed-out\n", vf->abs_vfid); + + /* verify TX hw is flushed */ + bnx2x_tx_hw_flushed(bp, poll_cnt); +} + +static void bnx2x_vfop_flr(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_cur(bp, vf); + struct bnx2x_vfop_args_qx *qx = &vfop->args.qx; + enum bnx2x_vfop_flr_state state = vfop->state; + struct bnx2x_vfop_cmd cmd = { + .done = bnx2x_vfop_flr, + .block = false, + }; + + if (vfop->rc < 0) + goto op_err; + + DP(BNX2X_MSG_IOV, "vf[%d] STATE: %d\n", vf->abs_vfid, state); + + switch (state) { + case BNX2X_VFOP_FLR_QUEUES: + /* the cleanup operations are valid if and only if the VF + * was first acquired. + */ + if (++(qx->qid) < vf_rxq_count(vf)) { + vfop->rc = bnx2x_vfop_qflr_cmd(bp, vf, &cmd, + qx->qid); + if (vfop->rc) + goto op_err; + return; + } + /* remove multicasts */ + vfop->state = BNX2X_VFOP_FLR_HW; + vfop->rc = bnx2x_vfop_mcast_cmd(bp, vf, &cmd, NULL, + 0, true); + if (vfop->rc) + goto op_err; + return; + case BNX2X_VFOP_FLR_HW: + + /* dispatch final cleanup and wait for HW queues to flush */ + bnx2x_vf_flr_clnup_hw(bp, vf); + + /* release VF resources */ + bnx2x_vf_free_resc(bp, vf); + + /* re-open the mailbox */ + bnx2x_vf_enable_mbx(bp, vf->abs_vfid); + + goto op_done; + default: + bnx2x_vfop_default(state); + } +op_err: + BNX2X_ERR("VF[%d] FLR error: rc %d\n", vf->abs_vfid, vfop->rc); +op_done: + vf->flr_clnup_stage = VF_FLR_ACK; + bnx2x_vfop_end(bp, vf, vfop); + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR); +} + +static int bnx2x_vfop_flr_cmd(struct bnx2x *bp, + struct bnx2x_virtf *vf, + vfop_handler_t done) +{ + struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); + if (vfop) { + vfop->args.qx.qid = -1; /* loop */ + bnx2x_vfop_opset(BNX2X_VFOP_FLR_QUEUES, + bnx2x_vfop_flr, done); + return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_flr, false); + } + return -ENOMEM; +} + +static void bnx2x_vf_flr_clnup(struct bnx2x *bp, struct bnx2x_virtf *prev_vf) +{ + int i = prev_vf ? prev_vf->index + 1 : 0; + struct bnx2x_virtf *vf; + + /* find next VF to cleanup */ +next_vf_to_clean: + for (; + i < BNX2X_NR_VIRTFN(bp) && + (bnx2x_vf(bp, i, state) != VF_RESET || + bnx2x_vf(bp, i, flr_clnup_stage) != VF_FLR_CLN); + i++) + ; + + DP(BNX2X_MSG_IOV, "next vf to cleanup: %d. num of vfs: %d\n", i, + BNX2X_NR_VIRTFN(bp)); + + if (i < BNX2X_NR_VIRTFN(bp)) { + vf = BP_VF(bp, i); + + /* lock the vf pf channel */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR); + + /* invoke the VF FLR SM */ + if (bnx2x_vfop_flr_cmd(bp, vf, bnx2x_vf_flr_clnup)) { + BNX2X_ERR("VF[%d]: FLR cleanup failed -ENOMEM\n", + vf->abs_vfid); + + /* mark the VF to be ACKED and continue */ + vf->flr_clnup_stage = VF_FLR_ACK; + goto next_vf_to_clean; + } + return; + } + + /* we are done, update vf records */ + for_each_vf(bp, i) { + vf = BP_VF(bp, i); + + if (vf->flr_clnup_stage != VF_FLR_ACK) + continue; + + vf->flr_clnup_stage = VF_FLR_EPILOG; + } + + /* Acknowledge the handled VFs. + * we are acknowledge all the vfs which an flr was requested for, even + * if amongst them there are such that we never opened, since the mcp + * will interrupt us immediately again if we only ack some of the bits, + * resulting in an endless loop. This can happen for example in KVM + * where an 'all ones' flr request is sometimes given by hyper visor + */ + DP(BNX2X_MSG_MCP, "DRV_STATUS_VF_DISABLED ACK for vfs 0x%x 0x%x\n", + bp->vfdb->flrd_vfs[0], bp->vfdb->flrd_vfs[1]); + for (i = 0; i < FLRD_VFS_DWORDS; i++) + SHMEM2_WR(bp, drv_ack_vf_disabled[BP_FW_MB_IDX(bp)][i], + bp->vfdb->flrd_vfs[i]); + + bnx2x_fw_command(bp, DRV_MSG_CODE_VF_DISABLED_DONE, 0); + + /* clear the acked bits - better yet if the MCP implemented + * write to clear semantics + */ + for (i = 0; i < FLRD_VFS_DWORDS; i++) + SHMEM2_WR(bp, drv_ack_vf_disabled[BP_FW_MB_IDX(bp)][i], 0); +} + +void bnx2x_vf_handle_flr_event(struct bnx2x *bp) +{ + int i; + + /* Read FLR'd VFs */ + for (i = 0; i < FLRD_VFS_DWORDS; i++) + bp->vfdb->flrd_vfs[i] = SHMEM2_RD(bp, mcp_vf_disabled[i]); + + DP(BNX2X_MSG_MCP, + "DRV_STATUS_VF_DISABLED received for vfs 0x%x 0x%x\n", + bp->vfdb->flrd_vfs[0], bp->vfdb->flrd_vfs[1]); + + for_each_vf(bp, i) { + struct bnx2x_virtf *vf = BP_VF(bp, i); + u32 reset = 0; + + if (vf->abs_vfid < 32) + reset = bp->vfdb->flrd_vfs[0] & (1 << vf->abs_vfid); + else + reset = bp->vfdb->flrd_vfs[1] & + (1 << (vf->abs_vfid - 32)); + + if (reset) { + /* set as reset and ready for cleanup */ + vf->state = VF_RESET; + vf->flr_clnup_stage = VF_FLR_CLN; + + DP(BNX2X_MSG_IOV, + "Initiating Final cleanup for VF %d\n", + vf->abs_vfid); + } + } + + /* do the FLR cleanup for all marked VFs*/ + bnx2x_vf_flr_clnup(bp, NULL); +} + /* IOV global initialization routines */ void bnx2x_iov_init_dq(struct bnx2x *bp) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index a09db28..25396fa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -684,9 +684,16 @@ int bnx2x_vfop_release_cmd(struct bnx2x *bp, void bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf, bool block); int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); + +/* FLR routines */ + /* VF FLR helpers */ int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid); void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid); + +/* Handles an FLR (or VF_DISABLE) notification form the MCP */ +void bnx2x_vf_handle_flr_event(struct bnx2x *bp); + void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, u16 length); void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 6278a9e..554c119 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -312,6 +312,7 @@ enum channel_tlvs { CHANNEL_TLV_RELEASE, CHANNEL_TLV_PF_RELEASE_VF, CHANNEL_TLV_LIST_END, + CHANNEL_TLV_FLR, CHANNEL_TLV_MAX }; -- cgit v0.10.2 From abc5a021ba645cd162205209bd5664a0d4b866a6 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:43 +0000 Subject: bnx2x: Support PF <-> VF Bulletin Board The PF <-> VF Bulletin Board is a simple interface between the PF and the VF. The main reason for the Bulletin Board is to allow the PF to be the initiator. The VF publishes at 'acquire' stage the GPA of a Bulletin Board structure it has allocated. The PF notes this GPA in the VF database. The VF samples the Bulletin Board periodically for new messages. The latest version of the BB is always used. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 2431ffd..335b536 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1259,6 +1259,12 @@ struct bnx2x { /* we set aside a copy of the acquire response */ struct pfvf_acquire_resp_tlv acquire_resp; + /* bulletin board for messages from pf to vf */ + union pf_vf_bulletin *pf2vf_bulletin; + dma_addr_t pf2vf_bulletin_mapping; + + struct pf_vf_bulletin_content old_bulletin; + struct net_device *dev; struct pci_dev *pdev; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index cdb073a..f9a15cb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3793,6 +3793,93 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) return 0; } +/* New mac for VF. Consider these cases: + * 1. VF hasn't been acquired yet - save the mac in local bulletin board and + * supply at acquire. + * 2. VF has already been acquired but has not yet initialized - store in local + * bulletin board. mac will be posted on VF bulletin board after VF init. VF + * will configure this mac when it is ready. + * 3. VF has already initialized but has not yet setup a queue - post the new + * mac on VF's bulletin board right now. VF will configure this mac when it + * is ready. + * 4. VF has already set a queue - delete any macs already configured for this + * queue and manually config the new mac. + * In any event, once this function has been called refuse any attempts by the + * VF to configure any mac for itself except for this mac. In case of a race + * where the VF fails to see the new post on its bulletin board before sending a + * mac configuration request, the PF will simply fail the request and VF can try + * again after consulting its bulletin board + */ +int bnx2x_set_vf_mac(struct net_device *dev, int queue, u8 *mac) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc, q_logical_state, vfidx = queue; + struct bnx2x_virtf *vf = BP_VF(bp, vfidx); + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx); + + /* if SRIOV is disabled there is nothing to do (and somewhere, someone + * has erred). + */ + if (!IS_SRIOV(bp)) { + BNX2X_ERR("bnx2x_set_vf_mac called though sriov is disabled\n"); + return -EINVAL; + } + + if (!is_valid_ether_addr(mac)) { + BNX2X_ERR("mac address invalid\n"); + return -EINVAL; + } + + /* update PF's copy of the VF's bulletin. will no longer accept mac + * configuration requests from vf unless match this mac + */ + bulletin->valid_bitmap |= 1 << MAC_ADDR_VALID; + memcpy(bulletin->mac, mac, ETH_ALEN); + + /* Post update on VF's bulletin board */ + rc = bnx2x_post_vf_bulletin(bp, vfidx); + if (rc) { + BNX2X_ERR("failed to update VF[%d] bulletin\n", vfidx); + return rc; + } + + /* is vf initialized and queue set up? */ + q_logical_state = + bnx2x_get_q_logical_state(bp, &bnx2x_vfq(vf, 0, sp_obj)); + if (vf->state == VF_ENABLED && + q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) { + /* configure the mac in device on this vf's queue */ + unsigned long flags = 0; + struct bnx2x_vlan_mac_obj *mac_obj = &bnx2x_vfq(vf, 0, mac_obj); + + /* must lock vfpf channel to protect against vf flows */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); + + /* remove existing eth macs */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true); + if (rc) { + BNX2X_ERR("failed to delete eth macs\n"); + return -EINVAL; + } + + /* remove existing uc list macs */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true); + if (rc) { + BNX2X_ERR("failed to delete uc_list macs\n"); + return -EINVAL; + } + + /* configure the new mac to device */ + __set_bit(RAMROD_COMP_WAIT, &flags); + bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true, + BNX2X_ETH_MAC, &flags); + + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); + } + + return rc; +} + /* called with rtnl_lock */ int bnx2x_change_mac_addr(struct net_device *dev, void *p) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index cd1eaff..23a1fa9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -496,6 +496,8 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev); /* setup_tc callback */ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc); +int bnx2x_set_vf_mac(struct net_device *dev, int queue, u8 *mac); + /* select_queue callback */ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 00c110e..216802a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -5248,6 +5248,61 @@ void bnx2x_drv_pulse(struct bnx2x *bp) bp->fw_drv_pulse_wr_seq); } +/* crc is the first field in the bulletin board. compute the crc over the + * entire bulletin board excluding the crc field itself + */ +u32 bnx2x_crc_vf_bulletin(struct bnx2x *bp, + struct pf_vf_bulletin_content *bulletin) +{ + return crc32(BULLETIN_CRC_SEED, + ((u8 *)bulletin) + sizeof(bulletin->crc), + BULLETIN_CONTENT_SIZE - sizeof(bulletin->crc)); +} + +/* Check for new posts on the bulletin board */ +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp) +{ + struct pf_vf_bulletin_content bulletin = bp->pf2vf_bulletin->content; + int attempts; + + /* bulletin board hasn't changed since last sample */ + if (bp->old_bulletin.version == bulletin.version) + return PFVF_BULLETIN_UNCHANGED; + + /* validate crc of new bulletin board */ + if (bp->old_bulletin.version != bp->pf2vf_bulletin->content.version) { + /* sampling structure in mid post may result with corrupted data + * validate crc to ensure coherency. + */ + for (attempts = 0; attempts < BULLETIN_ATTEMPTS; attempts++) { + bulletin = bp->pf2vf_bulletin->content; + if (bulletin.crc == bnx2x_crc_vf_bulletin(bp, + &bulletin)) + break; + + BNX2X_ERR("bad crc on bulletin board. contained %x computed %x\n", + bulletin.crc, + bnx2x_crc_vf_bulletin(bp, &bulletin)); + } + if (attempts >= BULLETIN_ATTEMPTS) { + BNX2X_ERR("pf to vf bulletin board crc was wrong %d consecutive times. Aborting\n", + attempts); + return PFVF_BULLETIN_CRC_ERR; + } + } + + /* the mac address in bulletin board is valid and is new */ + if (bulletin.valid_bitmap & 1 << MAC_ADDR_VALID && + memcmp(bulletin.mac, bp->old_bulletin.mac, ETH_ALEN)) { + /* update new mac to net device */ + memcpy(bp->dev->dev_addr, bulletin.mac, ETH_ALEN); + } + + /* copy new bulletin board to bp */ + bp->old_bulletin = bulletin; + + return PFVF_BULLETIN_UPDATED; +} static void bnx2x_timer(unsigned long data) { @@ -5284,6 +5339,10 @@ static void bnx2x_timer(unsigned long data) if (bp->state == BNX2X_STATE_OPEN) bnx2x_stats_handle(bp, STATS_EVENT_UPDATE); + /* sample pf vf bulletin board for new posts from pf */ + if (IS_VF(bp)) + bnx2x_sample_bulletin(bp); + mod_timer(&bp->timer, jiffies + bp->current_interval); } @@ -11660,7 +11719,7 @@ static const struct net_device_ops bnx2x_netdev_ops = { .ndo_poll_controller = poll_bnx2x, #endif .ndo_setup_tc = bnx2x_setup_tc, - + .ndo_set_vf_mac = bnx2x_set_vf_mac, #ifdef NETDEV_FCOE_WWNN .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, #endif @@ -12321,6 +12380,11 @@ static int bnx2x_init_one(struct pci_dev *pdev, /* allocate vf2pf mailbox for vf to pf channel */ BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping, sizeof(struct bnx2x_vf_mbx_msg)); + + /* allocate pf 2 vf bulletin board */ + BNX2X_PCI_ALLOC(bp->pf2vf_bulletin, &bp->pf2vf_bulletin_mapping, + sizeof(union pf_vf_bulletin)); + } else { doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); if (doorbell_size > pci_resource_len(pdev, 2)) { @@ -13379,6 +13443,9 @@ int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) req->resc_request.num_mac_filters = VF_ACQUIRE_MAC_FILTERS; req->resc_request.num_mc_filters = VF_ACQUIRE_MC_FILTERS; + /* pf 2 vf bulletin board address */ + req->bulletin_addr = bp->pf2vf_bulletin_mapping; + /* add list termination tlv */ bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, sizeof(struct channel_list_end_tlv)); @@ -13701,6 +13768,7 @@ int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx) return rc; } + /* PF failed the transaction */ if (resp->hdr.status != PFVF_STATUS_SUCCESS) { BNX2X_ERR("TEARDOWN for queue %d failed: %d\n", qidx, resp->hdr.status); @@ -13727,6 +13795,9 @@ int bnx2x_vfpf_set_mac(struct bnx2x *bp) req->filters[0].flags = VFPF_Q_FILTER_DEST_MAC_VALID | VFPF_Q_FILTER_SET_MAC; + /* sample bulletin board for new mac */ + bnx2x_sample_bulletin(bp); + /* copy mac from device to request */ memcpy(req->filters[0].mac, bp->dev->dev_addr, ETH_ALEN); @@ -13744,7 +13815,26 @@ int bnx2x_vfpf_set_mac(struct bnx2x *bp) return rc; } - /* PF failed the transaction */ + /* failure may mean PF was configured with a new mac for us */ + while (resp->hdr.status == PFVF_STATUS_FAILURE) { + DP(BNX2X_MSG_IOV, + "vfpf SET MAC failed. Check bulletin board for new posts\n"); + + /* check if bulletin board was updated */ + if (bnx2x_sample_bulletin(bp) == PFVF_BULLETIN_UPDATED) { + /* copy mac from device to request */ + memcpy(req->filters[0].mac, bp->dev->dev_addr, + ETH_ALEN); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, + bp->vf2pf_mbox_mapping); + } else { + /* no new info in bulletin */ + break; + } + } + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { BNX2X_ERR("vfpf SET MAC failed: %d\n", resp->hdr.status); return -EINVAL; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index c96ce5b..1f1e823 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -2058,6 +2058,10 @@ void bnx2x_iov_free_mem(struct bnx2x *bp) BNX2X_PCI_FREE(BP_VF_MBX_DMA(bp)->addr, BP_VF_MBX_DMA(bp)->mapping, BP_VF_MBX_DMA(bp)->size); + + BNX2X_PCI_FREE(BP_VF_BULLETIN_DMA(bp)->addr, + BP_VF_BULLETIN_DMA(bp)->mapping, + BP_VF_BULLETIN_DMA(bp)->size); } int bnx2x_iov_alloc_mem(struct bnx2x *bp) @@ -2097,6 +2101,12 @@ int bnx2x_iov_alloc_mem(struct bnx2x *bp) tot_size); BP_VF_MBX_DMA(bp)->size = tot_size; + /* allocate local bulletin boards */ + tot_size = BNX2X_NR_VIRTFN(bp) * BULLETIN_CONTENT_SIZE; + BNX2X_PCI_ALLOC(BP_VF_BULLETIN_DMA(bp)->addr, + &BP_VF_BULLETIN_DMA(bp)->mapping, tot_size); + BP_VF_BULLETIN_DMA(bp)->size = tot_size; + return 0; alloc_mem_err: @@ -2810,6 +2820,9 @@ int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, dma_addr_t *sb_map) vf->state = VF_ENABLED; + /* update vf bulletin board */ + bnx2x_post_vf_bulletin(bp, vf->index); + return 0; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 25396fa..aab2a05 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -378,6 +378,12 @@ struct bnx2x_vfdb { struct bnx2x_vf_mbx mbxs[BNX2X_MAX_NUM_OF_VFS]; #define BP_VF_MBX(bp, vfid) (&((bp)->vfdb->mbxs[(vfid)])) + struct hw_dma bulletin_dma; +#define BP_VF_BULLETIN_DMA(bp) (&((bp)->vfdb->bulletin_dma)) +#define BP_VF_BULLETIN(bp, vf) \ + (((struct pf_vf_bulletin_content *)(BP_VF_BULLETIN_DMA(bp)->addr)) \ + + (vf)) + struct hw_dma sp_dma; #define bnx2x_vf_sp(bp, vf, field) ((bp)->vfdb->sp_dma.addr + \ (vf)->index * sizeof(struct bnx2x_vf_sp) + \ @@ -702,4 +708,16 @@ void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list); bool bnx2x_tlv_supported(u16 tlvtype); +u32 bnx2x_crc_vf_bulletin(struct bnx2x *bp, + struct pf_vf_bulletin_content *bulletin); +int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf); + +enum sample_bulletin_result { + PFVF_BULLETIN_UNCHANGED, + PFVF_BULLETIN_UPDATED, + PFVF_BULLETIN_CRC_ERR +}; + +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); + #endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index ba8b95d..b410b9f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -297,6 +297,10 @@ static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf, resc->num_mc_filters = 0; if (status == PFVF_STATUS_SUCCESS) { + /* fill in the allocated resources */ + struct pf_vf_bulletin_content *bulletin = + BP_VF_BULLETIN(bp, vf->index); + for_each_vfq(vf, i) resc->hw_qid[i] = vfq_qzone_id(vf, vfq_get(vf, i)); @@ -305,6 +309,12 @@ static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf, resc->hw_sbs[i].hw_sb_id = vf_igu_sb(vf, i); resc->hw_sbs[i].sb_qid = vf_hc_qzone(vf, i); } + + /* if a mac has been set for this vf, supply it */ + if (bulletin->valid_bitmap & 1 << MAC_ADDR_VALID) { + memcpy(resc->current_mac_addr, bulletin->mac, + ETH_ALEN); + } } } @@ -356,6 +366,9 @@ static void bnx2x_vf_mbx_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, /* acquire the resources */ rc = bnx2x_vf_acquire(bp, vf, &acquire->resc_request); + /* store address of vf's bulletin board */ + vf->bulletin_map = acquire->bulletin_addr; + /* response */ bnx2x_vf_mbx_acquire_resp(bp, vf, mbx, rc); } @@ -766,11 +779,37 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp, struct bnx2x_vf_mbx *mbx) { struct vfpf_set_q_filters_tlv *filters = &mbx->msg->req.set_q_filters; + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf->index); struct bnx2x_vfop_cmd cmd = { .done = bnx2x_vf_mbx_resp, .block = false, }; + /* if a mac was already set for this VF via the set vf mac ndo, we only + * accept mac configurations of that mac. Why accept them at all? + * because PF may have been unable to configure the mac at the time + * since queue was not set up. + */ + if (bulletin->valid_bitmap & 1 << MAC_ADDR_VALID) { + /* once a mac was set by ndo can only accept a single mac... */ + if (filters->n_mac_vlan_filters > 1) { + BNX2X_ERR("VF[%d] requested the addition of multiple macs after set_vf_mac ndo was called\n", + vf->abs_vfid); + vf->op_rc = -EPERM; + goto response; + } + + /* ...and only the mac set by the ndo */ + if (filters->n_mac_vlan_filters == 1 && + memcmp(filters->filters->mac, bulletin->mac, ETH_ALEN)) { + BNX2X_ERR("VF[%d] requested the addition of a mac address not matching the one configured by set_vf_mac ndo\n", + vf->abs_vfid); + + vf->op_rc = -EPERM; + goto response; + } + } + /* verify vf_qid */ if (filters->vf_qid > vf_rxq_count(vf)) goto response; @@ -968,3 +1007,29 @@ mbx_error: mbx_done: return; } + +/* propagate local bulletin board to vf */ +int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf) +{ + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf); + dma_addr_t pf_addr = BP_VF_BULLETIN_DMA(bp)->mapping + + vf * BULLETIN_CONTENT_SIZE; + dma_addr_t vf_addr = bnx2x_vf(bp, vf, bulletin_map); + u32 len = BULLETIN_CONTENT_SIZE; + int rc; + + /* can only update vf after init took place */ + if (bnx2x_vf(bp, vf, state) != VF_ENABLED && + bnx2x_vf(bp, vf, state) != VF_ACQUIRED) + return 0; + + /* increment bulletin board version and compute crc */ + bulletin->version++; + bulletin->crc = bnx2x_crc_vf_bulletin(bp, bulletin); + + /* propagate bulletin board via dmae to vm memory */ + rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, + bnx2x_vf(bp, vf, abs_vfid), U64_HI(vf_addr), + U64_LO(vf_addr), len/4); + return rc; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 554c119..9f07ada 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -37,6 +37,7 @@ struct hw_sb_info { * A.K.A VF-PF mailbox */ #define TLV_BUFFER_SIZE 1024 +#define PF_VF_BULLETIN_SIZE 512 #define VFPF_QUEUE_FLG_TPA 0x0001 #define VFPF_QUEUE_FLG_TPA_IPV6 0x0002 @@ -60,6 +61,9 @@ struct hw_sb_info { #define VFPF_RX_MASK_ACCEPT_ALL_UNICAST 0x00000004 #define VFPF_RX_MASK_ACCEPT_ALL_MULTICAST 0x00000008 #define VFPF_RX_MASK_ACCEPT_BROADCAST 0x00000010 +#define BULLETIN_CONTENT_SIZE (sizeof(struct pf_vf_bulletin_content)) +#define BULLETIN_ATTEMPTS 5 /* crc failures before throwing towel */ +#define BULLETIN_CRC_SEED 0 enum { PFVF_STATUS_WAITING = 0, @@ -299,6 +303,38 @@ union pfvf_tlvs { struct tlv_buffer_size tlv_buf_size; }; +/* This is a structure which is allocated in the VF, which the PF may update + * when it deems it necessary to do so. The bulletin board is sampled + * periodically by the VF. A copy per VF is maintained in the PF (to prevent + * loss of data upon multiple updates (or the need for read modify write)). + */ +struct pf_vf_bulletin_size { + u8 size[PF_VF_BULLETIN_SIZE]; +}; + +struct pf_vf_bulletin_content { + u32 crc; /* crc of structure to ensure is not in + * mid-update + */ + u32 version; + + aligned_u64 valid_bitmap; /* bitmap indicating which fields + * hold valid values + */ + +#define MAC_ADDR_VALID 0 /* alert the vf that a new mac address + * is available for it + */ + + u8 mac[ETH_ALEN]; + u8 padding[2]; +}; + +union pf_vf_bulletin { + struct pf_vf_bulletin_content content; + struct pf_vf_bulletin_size size; +}; + #define MAX_TLVS_IN_LIST 50 enum channel_tlvs { @@ -313,6 +349,7 @@ enum channel_tlvs { CHANNEL_TLV_PF_RELEASE_VF, CHANNEL_TLV_LIST_END, CHANNEL_TLV_FLR, + CHANNEL_TLV_PF_SET_MAC, CHANNEL_TLV_MAX }; -- cgit v0.10.2 From 8395be5e04647c56fa6b9cac6dfd6ae16bcb7de3 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 1 Jan 2013 05:22:44 +0000 Subject: bnx2x: Add VF device ids and enable feature Add the various VF device ids (of all supported hardware) Add the calls to enable_sriov and disable_sriov to enable the SR-IOV feature. This patch also advances the version and release date of the bnx2x module. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 335b536..8596917 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -26,8 +26,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.78.00-0" -#define DRV_MODULE_RELDATE "2012/09/27" +#define DRV_MODULE_VERSION "1.78.01-0" +#define DRV_MODULE_RELDATE "2012/10/30" #define BNX2X_BC_VER 0x040200 #if defined(CONFIG_DCB) @@ -802,36 +802,46 @@ struct bnx2x_common { #define CHIP_NUM_57711E 0x1650 #define CHIP_NUM_57712 0x1662 #define CHIP_NUM_57712_MF 0x1663 +#define CHIP_NUM_57712_VF 0x166f #define CHIP_NUM_57713 0x1651 #define CHIP_NUM_57713E 0x1652 #define CHIP_NUM_57800 0x168a #define CHIP_NUM_57800_MF 0x16a5 +#define CHIP_NUM_57800_VF 0x16a9 #define CHIP_NUM_57810 0x168e #define CHIP_NUM_57810_MF 0x16ae +#define CHIP_NUM_57810_VF 0x16af #define CHIP_NUM_57811 0x163d #define CHIP_NUM_57811_MF 0x163e +#define CHIP_NUM_57811_VF 0x163f #define CHIP_NUM_57840_OBSOLETE 0x168d #define CHIP_NUM_57840_MF_OBSOLETE 0x16ab #define CHIP_NUM_57840_4_10 0x16a1 #define CHIP_NUM_57840_2_20 0x16a2 #define CHIP_NUM_57840_MF 0x16a4 +#define CHIP_NUM_57840_VF 0x16ad #define CHIP_IS_E1(bp) (CHIP_NUM(bp) == CHIP_NUM_57710) #define CHIP_IS_57711(bp) (CHIP_NUM(bp) == CHIP_NUM_57711) #define CHIP_IS_57711E(bp) (CHIP_NUM(bp) == CHIP_NUM_57711E) #define CHIP_IS_57712(bp) (CHIP_NUM(bp) == CHIP_NUM_57712) +#define CHIP_IS_57712_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_VF) #define CHIP_IS_57712_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_MF) #define CHIP_IS_57800(bp) (CHIP_NUM(bp) == CHIP_NUM_57800) #define CHIP_IS_57800_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_MF) +#define CHIP_IS_57800_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_VF) #define CHIP_IS_57810(bp) (CHIP_NUM(bp) == CHIP_NUM_57810) #define CHIP_IS_57810_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_MF) +#define CHIP_IS_57810_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_VF) #define CHIP_IS_57811(bp) (CHIP_NUM(bp) == CHIP_NUM_57811) #define CHIP_IS_57811_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_MF) +#define CHIP_IS_57811_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_VF) #define CHIP_IS_57840(bp) \ ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || \ (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || \ (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) #define CHIP_IS_57840_MF(bp) ((CHIP_NUM(bp) == CHIP_NUM_57840_MF) || \ (CHIP_NUM(bp) == CHIP_NUM_57840_MF_OBSOLETE)) +#define CHIP_IS_57840_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57840_VF) #define CHIP_IS_E1H(bp) (CHIP_IS_57711(bp) || \ CHIP_IS_57711E(bp)) #define CHIP_IS_E2(bp) (CHIP_IS_57712(bp) || \ @@ -840,10 +850,13 @@ struct bnx2x_common { CHIP_IS_57800_MF(bp) || \ CHIP_IS_57810(bp) || \ CHIP_IS_57810_MF(bp) || \ + CHIP_IS_57810_VF(bp) || \ CHIP_IS_57811(bp) || \ CHIP_IS_57811_MF(bp) || \ + CHIP_IS_57811_VF(bp) || \ CHIP_IS_57840(bp) || \ - CHIP_IS_57840_MF(bp)) + CHIP_IS_57840_MF(bp) || \ + CHIP_IS_57840_VF(bp)) #define CHIP_IS_E1x(bp) (CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp))) #define USES_WARPCORE(bp) (CHIP_IS_E3(bp)) #define IS_E1H_OFFSET (!CHIP_IS_E1(bp)) @@ -1195,8 +1208,9 @@ struct bnx2x_fw_stats_data { enum { BNX2X_SP_RTNL_SETUP_TC, BNX2X_SP_RTNL_TX_TIMEOUT, - BNX2X_SP_RTNL_AFEX_F_UPDATE, BNX2X_SP_RTNL_FAN_FAILURE, + BNX2X_SP_RTNL_AFEX_F_UPDATE, + BNX2X_SP_RTNL_ENABLE_SRIOV, BNX2X_SP_RTNL_VFPF_MCAST, BNX2X_SP_RTNL_VFPF_STORM_RX_MODE, }; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 216802a..2b6a919 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -195,12 +195,18 @@ static struct { #ifndef PCI_DEVICE_ID_NX2_57712_MF #define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF #endif +#ifndef PCI_DEVICE_ID_NX2_57712_VF +#define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF +#endif #ifndef PCI_DEVICE_ID_NX2_57800 #define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800 #endif #ifndef PCI_DEVICE_ID_NX2_57800_MF #define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF #endif +#ifndef PCI_DEVICE_ID_NX2_57800_VF +#define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF +#endif #ifndef PCI_DEVICE_ID_NX2_57810 #define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810 #endif @@ -210,6 +216,9 @@ static struct { #ifndef PCI_DEVICE_ID_NX2_57840_O #define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE #endif +#ifndef PCI_DEVICE_ID_NX2_57810_VF +#define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF +#endif #ifndef PCI_DEVICE_ID_NX2_57840_4_10 #define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10 #endif @@ -222,29 +231,41 @@ static struct { #ifndef PCI_DEVICE_ID_NX2_57840_MF #define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF #endif +#ifndef PCI_DEVICE_ID_NX2_57840_VF +#define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF +#endif #ifndef PCI_DEVICE_ID_NX2_57811 #define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811 #endif #ifndef PCI_DEVICE_ID_NX2_57811_MF #define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF #endif +#ifndef PCI_DEVICE_ID_NX2_57811_VF +#define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF +#endif + static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = { { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 }, { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF }, { 0 } }; @@ -9428,8 +9449,10 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work) rtnl_lock(); - if (!netif_running(bp->dev)) - goto sp_rtnl_exit; + if (!netif_running(bp->dev)) { + rtnl_unlock(); + return; + } /* if stop on error is defined no recovery flows should be executed */ #ifdef BNX2X_STOP_ON_ERROR @@ -9448,7 +9471,8 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work) bnx2x_parity_recover(bp); - goto sp_rtnl_exit; + rtnl_unlock(); + return; } if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) { @@ -9462,7 +9486,8 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work) bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); bnx2x_nic_load(bp, LOAD_NORMAL); - goto sp_rtnl_exit; + rtnl_unlock(); + return; } #ifdef BNX2X_STOP_ON_ERROR sp_rtnl_not_reset: @@ -9480,6 +9505,8 @@ sp_rtnl_not_reset: DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n"); netif_device_detach(bp->dev); bnx2x_close(bp->dev); + rtnl_unlock(); + return; } if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) { @@ -9495,8 +9522,28 @@ sp_rtnl_not_reset: bnx2x_vfpf_storm_rx_mode(bp); } -sp_rtnl_exit: + /* work which needs rtnl lock not-taken (as it takes the lock itself and + * can be called from other contexts as well) + */ + rtnl_unlock(); + + if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, + &bp->sp_rtnl_state)) { + int rc = 0; + + /* disbale sriov in case it is still enabled */ + pci_disable_sriov(bp->pdev); + DP(BNX2X_MSG_IOV, "sriov disabled\n"); + + /* enable sriov */ + DP(BNX2X_MSG_IOV, "vf num (%d)\n", (bp->vfdb->sriov.nr_virtfn)); + rc = pci_enable_sriov(bp->pdev, (bp->vfdb->sriov.nr_virtfn)); + if (rc) + BNX2X_ERR("pci_enable_sriov failed with %d\n", rc); + else + DP(BNX2X_MSG_IOV, "sriov enabled\n"); + } } /* end of nic load/unload */ @@ -11355,6 +11402,26 @@ static int bnx2x_init_bp(struct bnx2x *bp) * net_device service functions */ +static int bnx2x_open_epilog(struct bnx2x *bp) +{ + /* Enable sriov via delayed work. This must be done via delayed work + * because it causes the probe of the vf devices to be run, which invoke + * register_netdevice which must have rtnl lock taken. As we are holding + * the lock right now, that could only work if the probe would not take + * the lock. However, as the probe of the vf may be called from other + * contexts as well (such as passthrough to vm failes) it can't assume + * the lock is being held for it. Using delayed work here allows the + * probe code to simply take the lock (i.e. wait for it to be released + * if it is being held). + */ + smp_mb__before_clear_bit(); + set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state); + smp_mb__after_clear_bit(); + schedule_delayed_work(&bp->sp_rtnl_task, 0); + + return 0; +} + /* called with rtnl_lock */ static int bnx2x_open(struct net_device *dev) { @@ -11362,6 +11429,7 @@ static int bnx2x_open(struct net_device *dev) bool global = false; int other_engine = BP_PATH(bp) ? 0 : 1; bool other_load_status, load_status; + int rc; bp->stats_init = true; @@ -11416,7 +11484,10 @@ static int bnx2x_open(struct net_device *dev) } bp->recovery_state = BNX2X_RECOVERY_DONE; - return bnx2x_nic_load(bp, LOAD_OPEN); + rc = bnx2x_nic_load(bp, LOAD_OPEN); + if (rc) + return rc; + return bnx2x_open_epilog(bp); } /* called with rtnl_lock */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 1f1e823..71fcef0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -2034,6 +2034,10 @@ void bnx2x_iov_remove_one(struct bnx2x *bp) if (!IS_SRIOV(bp)) return; + DP(BNX2X_MSG_IOV, "about to call disable sriov\n"); + pci_disable_sriov(bp->pdev); + DP(BNX2X_MSG_IOV, "sriov disabled\n"); + /* free vf database */ __bnx2x_iov_free_vfdb(bp); } -- cgit v0.10.2 From 7e2cf4feba058476324dc545e3d1b316998c91e6 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:17 +0000 Subject: qlcnic: change driver hardware interface mechanism Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Create adapter abstraction layer and seperate 82xx hardware access routines. Create mailbox based HW interface mechanism Signed-off-by: Anirban Chakraborty Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index bc7ec64..5c5c578 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -402,6 +402,7 @@ struct qlcnic_hardware_context { struct qlcnic_hardware_ops *hw_ops; struct qlcnic_nic_intr_coalesce coal; struct qlcnic_fw_dump fw_dump; + u32 *reg_tbl; }; struct qlcnic_adapter_stats { @@ -492,8 +493,6 @@ struct qlcnic_recv_context { /* HW context creation */ #define QLCNIC_OS_CRB_RETRY_COUNT 4000 -#define QLCNIC_CDRP_SIGNATURE_MAKE(pcifn, version) \ - (((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16)) #define QLCNIC_CDRP_CMD_BIT 0x80000000 @@ -1266,10 +1265,8 @@ struct qlcnic_esw_statistics { #define QLCNIC_RESET_QUIESCENT 0xadd00020 struct _cdrp_cmd { - u32 cmd; - u32 arg1; - u32 arg2; - u32 arg3; + u32 num; + u32 *arg; }; struct qlcnic_cmd_args { @@ -1279,9 +1276,6 @@ struct qlcnic_cmd_args { int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter); int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config); - -int qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off); -int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data); int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data); int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data); void qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *, u64, u64 *); @@ -1291,9 +1285,10 @@ void qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *, u64, u64); (((addr) < (high)) && ((addr) >= (low))) #define QLCRD32(adapter, off) \ - (qlcnic_hw_read_wx_2M(adapter, off)) + (adapter->ahw->hw_ops->read_reg)(adapter, off) + #define QLCWR32(adapter, off, val) \ - (qlcnic_hw_write_wx_2M(adapter, off, val)) + adapter->ahw->hw_ops->write_reg(adapter, off, val) int qlcnic_pcie_sem_lock(struct qlcnic_adapter *, int, u32); void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int); @@ -1306,10 +1301,6 @@ void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int); qlcnic_pcie_sem_lock((a), 3, QLCNIC_PHY_LOCK_ID) #define qlcnic_phy_unlock(a) \ qlcnic_pcie_sem_unlock((a), 3) -#define qlcnic_api_lock(a) \ - qlcnic_pcie_sem_lock((a), 5, 0) -#define qlcnic_api_unlock(a) \ - qlcnic_pcie_sem_unlock((a), 5) #define qlcnic_sw_lock(a) \ qlcnic_pcie_sem_lock((a), 6, 0) #define qlcnic_sw_unlock(a) \ @@ -1324,9 +1315,7 @@ void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int); #define MAX_CTL_CHECK 1000 -int qlcnic_get_board_info(struct qlcnic_adapter *adapter); int qlcnic_wol_supported(struct qlcnic_adapter *adapter); -int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate); void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter); void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter); int qlcnic_dump_fw(struct qlcnic_adapter *); @@ -1365,47 +1354,28 @@ void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max); void qlcnic_set_multi(struct net_device *netdev); void qlcnic_free_mac_list(struct qlcnic_adapter *adapter); -int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32); -int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter); -int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable); -int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, int cmd); -int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable); -void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup); int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu); int qlcnic_change_mtu(struct net_device *netdev, int new_mtu); netdev_features_t qlcnic_fix_features(struct net_device *netdev, netdev_features_t features); int qlcnic_set_features(struct net_device *netdev, netdev_features_t features); -int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable); int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable); int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter); void qlcnic_update_cmd_producer(struct qlcnic_host_tx_ring *); -void qlcnic_fetch_mac(u32, u32, u8, u8 *); -void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring); -void qlcnic_clear_lb_mode(struct qlcnic_adapter *adapter); -int qlcnic_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode); /* Functions from qlcnic_ethtool.c */ int qlcnic_check_loopback_buff(unsigned char *data, u8 mac[]); /* Functions from qlcnic_main.c */ int qlcnic_reset_context(struct qlcnic_adapter *); -void qlcnic_issue_cmd(struct qlcnic_adapter *adapter, struct qlcnic_cmd_args *); void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings); int qlcnic_diag_alloc_res(struct net_device *netdev, int test); netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev); -int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val); int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data); -void qlcnic_dev_request_reset(struct qlcnic_adapter *); +int qlcnic_validate_max_rss(struct net_device *netdev, u8, u8); void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter); -/* Management functions */ -int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*); -int qlcnic_get_nic_info(struct qlcnic_adapter *, struct qlcnic_info *, u8); -int qlcnic_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *); -int qlcnic_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info*); - /* eSwitch management functions */ int qlcnic_config_switch_port(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); @@ -1418,12 +1388,10 @@ int qlcnic_get_eswitch_stats(struct qlcnic_adapter *, const u8, u8, struct __qlcnic_esw_statistics *); int qlcnic_clear_esw_stats(struct qlcnic_adapter *adapter, u8, u8, u8); int qlcnic_get_mac_stats(struct qlcnic_adapter *, struct qlcnic_mac_statistics *); -extern int qlcnic_config_tso; -int qlcnic_napi_add(struct qlcnic_adapter *, struct net_device *); -void qlcnic_napi_del(struct qlcnic_adapter *adapter); -void qlcnic_napi_enable(struct qlcnic_adapter *adapter); -void qlcnic_napi_disable(struct qlcnic_adapter *adapter); +void qlcnic_free_mbx_args(struct qlcnic_cmd_args *cmd); +void qlcnic_napi_del(struct qlcnic_adapter *); + int qlcnic_alloc_sds_rings(struct qlcnic_recv_context *, int); void qlcnic_free_sds_rings(struct qlcnic_recv_context *); void qlcnic_free_tx_rings(struct qlcnic_adapter *); @@ -1433,6 +1401,9 @@ void qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter); void qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter); void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter); void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter); +void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter); +void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter); + int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32); int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32); void qlcnic_set_vlan_config(struct qlcnic_adapter *, @@ -1462,6 +1433,271 @@ static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring) tx_ring->producer; } +struct qlcnic_nic_template { + int (*config_bridged_mode) (struct qlcnic_adapter *, u32); + int (*config_led) (struct qlcnic_adapter *, u32, u32); + int (*start_firmware) (struct qlcnic_adapter *); + int (*init_driver) (struct qlcnic_adapter *); + void (*request_reset) (struct qlcnic_adapter *, u32); + void (*cancel_idc_work) (struct qlcnic_adapter *); + int (*napi_add)(struct qlcnic_adapter *, struct net_device *); + void (*config_ipaddr)(struct qlcnic_adapter *, __be32, int); + irqreturn_t (*clear_legacy_intr)(struct qlcnic_adapter *); +}; + +/* Adapter hardware abstraction */ +struct qlcnic_hardware_ops { + void (*read_crb) (struct qlcnic_adapter *, char *, loff_t, size_t); + void (*write_crb) (struct qlcnic_adapter *, char *, loff_t, size_t); + int (*read_reg) (struct qlcnic_adapter *, ulong); + int (*write_reg) (struct qlcnic_adapter *, ulong, u32); + void (*get_ocm_win) (struct qlcnic_hardware_context *); + int (*get_mac_address) (struct qlcnic_adapter *, u8 *); + int (*setup_intr) (struct qlcnic_adapter *, u8); + int (*alloc_mbx_args)(struct qlcnic_cmd_args *, + struct qlcnic_adapter *, u32); + int (*mbx_cmd) (struct qlcnic_adapter *, struct qlcnic_cmd_args *); + void (*get_func_no) (struct qlcnic_adapter *); + int (*api_lock) (struct qlcnic_adapter *); + void (*api_unlock) (struct qlcnic_adapter *); + void (*add_sysfs) (struct qlcnic_adapter *); + void (*remove_sysfs) (struct qlcnic_adapter *); + void (*process_lb_rcv_ring_diag) (struct qlcnic_host_sds_ring *); + int (*create_rx_ctx) (struct qlcnic_adapter *); + int (*create_tx_ctx) (struct qlcnic_adapter *, + struct qlcnic_host_tx_ring *, int); + int (*setup_link_event) (struct qlcnic_adapter *, int); + int (*get_nic_info) (struct qlcnic_adapter *, struct qlcnic_info *, u8); + int (*get_pci_info) (struct qlcnic_adapter *, struct qlcnic_pci_info *); + int (*set_nic_info) (struct qlcnic_adapter *, struct qlcnic_info *); + int (*change_macvlan) (struct qlcnic_adapter *, u8*, __le16, u8); + void (*napi_enable) (struct qlcnic_adapter *); + void (*napi_disable) (struct qlcnic_adapter *); + void (*config_intr_coal) (struct qlcnic_adapter *); + int (*config_rss) (struct qlcnic_adapter *, int); + int (*config_hw_lro) (struct qlcnic_adapter *, int); + int (*config_loopback) (struct qlcnic_adapter *, u8); + int (*clear_loopback) (struct qlcnic_adapter *, u8); + int (*config_promisc_mode) (struct qlcnic_adapter *, u32); + void (*change_l2_filter) (struct qlcnic_adapter *, u64 *, __le16); + int (*get_board_info) (struct qlcnic_adapter *); +}; + +extern struct qlcnic_nic_template qlcnic_vf_ops; + +static inline int qlcnic_start_firmware(struct qlcnic_adapter *adapter) +{ + return adapter->nic_ops->start_firmware(adapter); +} + +static inline void qlcnic_read_crb(struct qlcnic_adapter *adapter, char *buf, + loff_t offset, size_t size) +{ + adapter->ahw->hw_ops->read_crb(adapter, buf, offset, size); +} + +static inline void qlcnic_write_crb(struct qlcnic_adapter *adapter, char *buf, + loff_t offset, size_t size) +{ + adapter->ahw->hw_ops->write_crb(adapter, buf, offset, size); +} + +static inline u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, + ulong off) +{ + return adapter->ahw->hw_ops->read_reg(adapter, off); +} + +static inline int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, + ulong off, u32 data) +{ + return adapter->ahw->hw_ops->write_reg(adapter, off, data); +} + +static inline int qlcnic_get_mac_address(struct qlcnic_adapter *adapter, + u8 *mac) +{ + return adapter->ahw->hw_ops->get_mac_address(adapter, mac); +} + +static inline int qlcnic_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) +{ + return adapter->ahw->hw_ops->setup_intr(adapter, num_intr); +} + +static inline int qlcnic_alloc_mbx_args(struct qlcnic_cmd_args *mbx, + struct qlcnic_adapter *adapter, u32 arg) +{ + return adapter->ahw->hw_ops->alloc_mbx_args(mbx, adapter, arg); +} + +static inline int qlcnic_issue_cmd(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) +{ + return adapter->ahw->hw_ops->mbx_cmd(adapter, cmd); +} + +static inline void qlcnic_get_func_no(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->get_func_no(adapter); +} + +static inline int qlcnic_api_lock(struct qlcnic_adapter *adapter) +{ + return adapter->ahw->hw_ops->api_lock(adapter); +} + +static inline void qlcnic_api_unlock(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->api_unlock(adapter); +} + +static inline void qlcnic_add_sysfs(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->add_sysfs(adapter); +} + +static inline void qlcnic_remove_sysfs(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->remove_sysfs(adapter); +} + +static inline void +qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) +{ + sds_ring->adapter->ahw->hw_ops->process_lb_rcv_ring_diag(sds_ring); +} + +static inline int qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) +{ + return adapter->ahw->hw_ops->create_rx_ctx(adapter); +} + +static inline int qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *ptr, + int ring) +{ + return adapter->ahw->hw_ops->create_tx_ctx(adapter, ptr, ring); +} + +static inline int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, + int enable) +{ + return adapter->ahw->hw_ops->setup_link_event(adapter, enable); +} + +static inline int qlcnic_get_nic_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *info, u8 id) +{ + return adapter->ahw->hw_ops->get_nic_info(adapter, info, id); +} + +static inline int qlcnic_get_pci_info(struct qlcnic_adapter *adapter, + struct qlcnic_pci_info *info) +{ + return adapter->ahw->hw_ops->get_pci_info(adapter, info); +} + +static inline int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *info) +{ + return adapter->ahw->hw_ops->set_nic_info(adapter, info); +} + +static inline int qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, + u8 *addr, __le16 id, u8 cmd) +{ + return adapter->ahw->hw_ops->change_macvlan(adapter, addr, id, cmd); +} + +static inline int qlcnic_napi_add(struct qlcnic_adapter *adapter, + struct net_device *netdev) +{ + return adapter->nic_ops->napi_add(adapter, netdev); +} + +static inline void qlcnic_napi_enable(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->napi_enable(adapter); +} + +static inline void qlcnic_napi_disable(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->napi_disable(adapter); +} + +static inline void qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter) +{ + adapter->ahw->hw_ops->config_intr_coal(adapter); +} + +static inline int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable) +{ + return adapter->ahw->hw_ops->config_rss(adapter, enable); +} + +static inline int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, + int enable) +{ + return adapter->ahw->hw_ops->config_hw_lro(adapter, enable); +} + +static inline int qlcnic_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) +{ + return adapter->ahw->hw_ops->config_loopback(adapter, mode); +} + +static inline int qlcnic_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode) +{ + return adapter->ahw->hw_ops->config_loopback(adapter, mode); +} + +static inline int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, + u32 mode) +{ + return adapter->ahw->hw_ops->config_promisc_mode(adapter, mode); +} + +static inline void qlcnic_change_filter(struct qlcnic_adapter *adapter, + u64 *addr, __le16 id) +{ + adapter->ahw->hw_ops->change_l2_filter(adapter, addr, id); +} + +static inline int qlcnic_get_board_info(struct qlcnic_adapter *adapter) +{ + return adapter->ahw->hw_ops->get_board_info(adapter); +} + +static inline void qlcnic_dev_request_reset(struct qlcnic_adapter *adapter, + u32 key) +{ + adapter->nic_ops->request_reset(adapter, key); +} + +static inline void qlcnic_cancel_idc_work(struct qlcnic_adapter *adapter) +{ + adapter->nic_ops->cancel_idc_work(adapter); +} + +static inline irqreturn_t +qlcnic_clear_legacy_intr(struct qlcnic_adapter *adapter) +{ + return adapter->nic_ops->clear_legacy_intr(adapter); +} + +static inline int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, + u32 rate) +{ + return adapter->nic_ops->config_led(adapter, state, rate); +} + +static inline void qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, + __be32 ip, int cmd) +{ + adapter->nic_ops->config_ipaddr(adapter, ip, cmd); +} + static inline void qlcnic_disable_int(struct qlcnic_host_sds_ring *sds_ring) { writel(0, sds_ring->crb_intr_mask); @@ -1480,12 +1716,6 @@ static inline void qlcnic_enable_int(struct qlcnic_host_sds_ring *sds_ring) extern const struct ethtool_ops qlcnic_ethtool_ops; extern const struct ethtool_ops qlcnic_ethtool_failed_ops; -struct qlcnic_nic_template { - int (*config_bridged_mode) (struct qlcnic_adapter *, u32); - int (*config_led) (struct qlcnic_adapter *, u32, u32); - int (*start_firmware) (struct qlcnic_adapter *); -}; - #define QLCDB(adapter, lvl, _fmt, _args...) do { \ if (NETIF_MSG_##lvl & adapter->ahw->msg_enable) \ printk(KERN_INFO "%s: %s: " _fmt, \ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index b14b8f0..7ebd861 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -7,6 +7,86 @@ #include "qlcnic.h" +static const struct qlcnic_mailbox_metadata qlcnic_mbx_tbl[] = { + {QLCNIC_CMD_CREATE_RX_CTX, 4, 1}, + {QLCNIC_CMD_DESTROY_RX_CTX, 2, 1}, + {QLCNIC_CMD_CREATE_TX_CTX, 4, 1}, + {QLCNIC_CMD_DESTROY_TX_CTX, 2, 1}, + {QLCNIC_CMD_INTRPT_TEST, 4, 1}, + {QLCNIC_CMD_SET_MTU, 4, 1}, + {QLCNIC_CMD_READ_PHY, 4, 2}, + {QLCNIC_CMD_WRITE_PHY, 5, 1}, + {QLCNIC_CMD_READ_HW_REG, 4, 1}, + {QLCNIC_CMD_GET_FLOW_CTL, 4, 2}, + {QLCNIC_CMD_SET_FLOW_CTL, 4, 1}, + {QLCNIC_CMD_READ_MAX_MTU, 4, 2}, + {QLCNIC_CMD_READ_MAX_LRO, 4, 2}, + {QLCNIC_CMD_MAC_ADDRESS, 4, 3}, + {QLCNIC_CMD_GET_PCI_INFO, 4, 1}, + {QLCNIC_CMD_GET_NIC_INFO, 4, 1}, + {QLCNIC_CMD_SET_NIC_INFO, 4, 1}, + {QLCNIC_CMD_GET_ESWITCH_CAPABILITY, 4, 3}, + {QLCNIC_CMD_TOGGLE_ESWITCH, 4, 1}, + {QLCNIC_CMD_GET_ESWITCH_STATUS, 4, 3}, + {QLCNIC_CMD_SET_PORTMIRRORING, 4, 1}, + {QLCNIC_CMD_CONFIGURE_ESWITCH, 4, 1}, + {QLCNIC_CMD_GET_MAC_STATS, 4, 1}, + {QLCNIC_CMD_GET_ESWITCH_PORT_CONFIG, 4, 3}, + {QLCNIC_CMD_GET_ESWITCH_STATS, 5, 1}, + {QLCNIC_CMD_CONFIG_PORT, 4, 1}, + {QLCNIC_CMD_TEMP_SIZE, 4, 4}, + {QLCNIC_CMD_GET_TEMP_HDR, 4, 1}, + {QLCNIC_CMD_SET_DRV_VER, 4, 1}, +}; + +static inline u32 qlcnic_get_cmd_signature(struct qlcnic_hardware_context *ahw) +{ + return (ahw->pci_func & 0xff) | ((ahw->fw_hal_version & 0xff) << 8) | + (0xcafe << 16); +} + +/* Allocate mailbox registers */ +int qlcnic_82xx_alloc_mbx_args(struct qlcnic_cmd_args *mbx, + struct qlcnic_adapter *adapter, u32 type) +{ + int i, size; + const struct qlcnic_mailbox_metadata *mbx_tbl; + + mbx_tbl = qlcnic_mbx_tbl; + size = ARRAY_SIZE(qlcnic_mbx_tbl); + for (i = 0; i < size; i++) { + if (type == mbx_tbl[i].cmd) { + mbx->req.num = mbx_tbl[i].in_args; + mbx->rsp.num = mbx_tbl[i].out_args; + mbx->req.arg = kcalloc(mbx->req.num, + sizeof(u32), GFP_ATOMIC); + if (!mbx->req.arg) + return -ENOMEM; + mbx->rsp.arg = kcalloc(mbx->rsp.num, + sizeof(u32), GFP_ATOMIC); + if (!mbx->rsp.arg) { + kfree(mbx->req.arg); + mbx->req.arg = NULL; + return -ENOMEM; + } + memset(mbx->req.arg, 0, sizeof(u32) * mbx->req.num); + memset(mbx->rsp.arg, 0, sizeof(u32) * mbx->rsp.num); + mbx->req.arg[0] = type; + break; + } + } + return 0; +} + +/* Free up mailbox registers */ +void qlcnic_free_mbx_args(struct qlcnic_cmd_args *cmd) +{ + kfree(cmd->req.arg); + cmd->req.arg = NULL; + kfree(cmd->rsp.arg); + cmd->rsp.arg = NULL; +} + static int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func) { int i; @@ -38,194 +118,105 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) return rsp; } -void -qlcnic_issue_cmd(struct qlcnic_adapter *adapter, struct qlcnic_cmd_args *cmd) +int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) { + int i; u32 rsp; u32 signature; struct pci_dev *pdev = adapter->pdev; struct qlcnic_hardware_context *ahw = adapter->ahw; - signature = QLCNIC_CDRP_SIGNATURE_MAKE(ahw->pci_func, - adapter->ahw->fw_hal_version); + signature = qlcnic_get_cmd_signature(ahw); /* Acquire semaphore before accessing CRB */ if (qlcnic_api_lock(adapter)) { - cmd->rsp.cmd = QLCNIC_RCODE_TIMEOUT; - return; + cmd->rsp.arg[0] = QLCNIC_RCODE_TIMEOUT; + return cmd->rsp.arg[0]; } QLCWR32(adapter, QLCNIC_SIGN_CRB_OFFSET, signature); - QLCWR32(adapter, QLCNIC_ARG1_CRB_OFFSET, cmd->req.arg1); - QLCWR32(adapter, QLCNIC_ARG2_CRB_OFFSET, cmd->req.arg2); - QLCWR32(adapter, QLCNIC_ARG3_CRB_OFFSET, cmd->req.arg3); + for (i = 1; i < QLCNIC_CDRP_MAX_ARGS; i++) + QLCWR32(adapter, QLCNIC_CDRP_ARG(i), cmd->req.arg[i]); QLCWR32(adapter, QLCNIC_CDRP_CRB_OFFSET, - QLCNIC_CDRP_FORM_CMD(cmd->req.cmd)); - + QLCNIC_CDRP_FORM_CMD(cmd->req.arg[0])); rsp = qlcnic_poll_rsp(adapter); if (rsp == QLCNIC_CDRP_RSP_TIMEOUT) { - dev_err(&pdev->dev, "CDRP response timeout.\n"); - cmd->rsp.cmd = QLCNIC_RCODE_TIMEOUT; + dev_err(&pdev->dev, "card response timeout.\n"); + cmd->rsp.arg[0] = QLCNIC_RCODE_TIMEOUT; } else if (rsp == QLCNIC_CDRP_RSP_FAIL) { - cmd->rsp.cmd = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET); - switch (cmd->rsp.cmd) { - case QLCNIC_RCODE_INVALID_ARGS: - dev_err(&pdev->dev, "CDRP invalid args: 0x%x.\n", - cmd->rsp.cmd); - break; - case QLCNIC_RCODE_NOT_SUPPORTED: - case QLCNIC_RCODE_NOT_IMPL: - dev_err(&pdev->dev, - "CDRP command not supported: 0x%x.\n", - cmd->rsp.cmd); - break; - case QLCNIC_RCODE_NOT_PERMITTED: - dev_err(&pdev->dev, - "CDRP requested action not permitted: 0x%x.\n", - cmd->rsp.cmd); - break; - case QLCNIC_RCODE_INVALID: - dev_err(&pdev->dev, - "CDRP invalid or unknown cmd received: 0x%x.\n", - cmd->rsp.cmd); - break; - case QLCNIC_RCODE_TIMEOUT: - dev_err(&pdev->dev, "CDRP command timeout: 0x%x.\n", - cmd->rsp.cmd); - break; - default: - dev_err(&pdev->dev, "CDRP command failed: 0x%x.\n", - cmd->rsp.cmd); - } - } else if (rsp == QLCNIC_CDRP_RSP_OK) { - cmd->rsp.cmd = QLCNIC_RCODE_SUCCESS; - if (cmd->rsp.arg2) - cmd->rsp.arg2 = QLCRD32(adapter, - QLCNIC_ARG2_CRB_OFFSET); - if (cmd->rsp.arg3) - cmd->rsp.arg3 = QLCRD32(adapter, - QLCNIC_ARG3_CRB_OFFSET); - } - if (cmd->rsp.arg1) - cmd->rsp.arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET); + cmd->rsp.arg[0] = QLCRD32(adapter, QLCNIC_CDRP_ARG(1)); + dev_err(&pdev->dev, "failed card response code:0x%x\n", + cmd->rsp.arg[0]); + } else if (rsp == QLCNIC_CDRP_RSP_OK) + cmd->rsp.arg[0] = QLCNIC_RCODE_SUCCESS; + + for (i = 1; i < cmd->rsp.num; i++) + cmd->rsp.arg[i] = QLCRD32(adapter, QLCNIC_CDRP_ARG(i)); /* Release semaphore */ qlcnic_api_unlock(adapter); - -} - -static uint32_t qlcnic_temp_checksum(uint32_t *temp_buffer, u32 temp_size) -{ - uint64_t sum = 0; - int count = temp_size / sizeof(uint32_t); - while (count-- > 0) - sum += *temp_buffer++; - while (sum >> 32) - sum = (sum & 0xFFFFFFFF) + (sum >> 32); - return ~sum; + return cmd->rsp.arg[0]; } int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter) { - int err, i; + int err = 0; void *tmp_addr; - u32 temp_size, version, csum, *template; - __le32 *tmp_buf; struct qlcnic_cmd_args cmd; - struct qlcnic_hardware_context *ahw; - struct qlcnic_dump_template_hdr *tmpl_hdr; dma_addr_t tmp_addr_t = 0; - ahw = adapter->ahw; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_TEMP_SIZE; - memset(&cmd.rsp, 1, sizeof(struct _cdrp_cmd)); - qlcnic_issue_cmd(adapter, &cmd); - if (cmd.rsp.cmd != QLCNIC_RCODE_SUCCESS) { - dev_info(&adapter->pdev->dev, - "Can't get template size %d\n", cmd.rsp.cmd); - err = -EIO; - return err; - } - temp_size = cmd.rsp.arg2; - version = cmd.rsp.arg3; - dev_info(&adapter->pdev->dev, - "minidump template version = 0x%x", version); - if (!temp_size) - return -EIO; - - tmp_addr = dma_alloc_coherent(&adapter->pdev->dev, temp_size, - &tmp_addr_t, GFP_KERNEL); + tmp_addr = dma_alloc_coherent(&adapter->pdev->dev, 0x1000, + &tmp_addr_t, GFP_KERNEL); if (!tmp_addr) { dev_err(&adapter->pdev->dev, "Can't get memory for FW dump template\n"); return -ENOMEM; } - memset(&cmd.rsp, 0, sizeof(struct _cdrp_cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_TEMP_HDR; - cmd.req.arg1 = LSD(tmp_addr_t); - cmd.req.arg2 = MSD(tmp_addr_t); - cmd.req.arg3 = temp_size; - qlcnic_issue_cmd(adapter, &cmd); - - err = cmd.rsp.cmd; - if (err != QLCNIC_RCODE_SUCCESS) { - dev_err(&adapter->pdev->dev, - "Failed to get mini dump template header %d\n", err); - err = -EIO; - goto error; - } - ahw->fw_dump.tmpl_hdr = vzalloc(temp_size); - if (!ahw->fw_dump.tmpl_hdr) { - err = -EIO; - goto error; - } - tmp_buf = tmp_addr; - template = (u32 *) ahw->fw_dump.tmpl_hdr; - for (i = 0; i < temp_size/sizeof(u32); i++) - *template++ = __le32_to_cpu(*tmp_buf++); - csum = qlcnic_temp_checksum((u32 *)ahw->fw_dump.tmpl_hdr, temp_size); - if (csum) { - dev_err(&adapter->pdev->dev, - "Template header checksum validation failed\n"); - err = -EIO; - goto error; + if (qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_TEMP_HDR)) { + err = -ENOMEM; + goto free_mem; } - tmpl_hdr = ahw->fw_dump.tmpl_hdr; - tmpl_hdr->drv_cap_mask = QLCNIC_DUMP_MASK_DEF; - ahw->fw_dump.enable = 1; -error: - dma_free_coherent(&adapter->pdev->dev, temp_size, tmp_addr, tmp_addr_t); + cmd.req.arg[1] = LSD(tmp_addr_t); + cmd.req.arg[2] = MSD(tmp_addr_t); + cmd.req.arg[3] = 0x1000; + err = qlcnic_issue_cmd(adapter, &cmd); + + + qlcnic_free_mbx_args(&cmd); + +free_mem: + dma_free_coherent(&adapter->pdev->dev, 0x1000, tmp_addr, tmp_addr_t); + return err; } int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu) { + int err = 0; struct qlcnic_cmd_args cmd; struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_SET_MTU; - cmd.req.arg1 = recv_ctx->context_id; - cmd.req.arg2 = mtu; - cmd.req.arg3 = 0; - if (recv_ctx->state == QLCNIC_HOST_CTX_STATE_ACTIVE) { - qlcnic_issue_cmd(adapter, &cmd); - if (cmd.rsp.cmd) { - dev_err(&adapter->pdev->dev, "Failed to set mtu\n"); - return -EIO; - } - } + if (recv_ctx->state != QLCNIC_HOST_CTX_STATE_ACTIVE) + return err; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_MTU); + cmd.req.arg[1] = recv_ctx->context_id; + cmd.req.arg[2] = mtu; - return 0; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_err(&adapter->pdev->dev, "Failed to set mtu\n"); + err = -EIO; + } + qlcnic_free_mbx_args(&cmd); + return err; } -static int -qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) +int qlcnic_82xx_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) { void *addr; struct qlcnic_hostrq_rx_ctx *prq; @@ -242,10 +233,10 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) u64 phys_addr; u8 i, nrds_rings, nsds_rings; + u16 temp_u16; size_t rq_size, rsp_size; u32 cap, reg, val, reg2; int err; - u16 temp; struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; @@ -279,11 +270,8 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) | QLCNIC_CAP0_VALIDOFF); cap |= (QLCNIC_CAP0_JUMBO_CONTIGUOUS | QLCNIC_CAP0_LRO_CONTIGUOUS); - if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) - cap |= QLCNIC_CAP0_LRO_MSS; - - temp = offsetof(struct qlcnic_hostrq_rx_ctx, msix_handler); - prq->valid_field_offset = cpu_to_le16(temp); + temp_u16 = offsetof(struct qlcnic_hostrq_rx_ctx, msix_handler); + prq->valid_field_offset = cpu_to_le16(temp_u16); prq->txrx_sds_binding = nsds_rings - 1; prq->capabilities[0] = cpu_to_le32(cap); @@ -329,20 +317,17 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) } phys_addr = hostrq_phys_addr; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.arg1 = (u32) (phys_addr >> 32); - cmd.req.arg2 = (u32) (phys_addr & 0xffffffff); - cmd.req.arg3 = rq_size; - cmd.req.cmd = QLCNIC_CDRP_CMD_CREATE_RX_CTX; - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CREATE_RX_CTX); + cmd.req.arg[1] = MSD(phys_addr); + cmd.req.arg[2] = LSD(phys_addr); + cmd.req.arg[3] = rq_size; + err = qlcnic_issue_cmd(adapter, &cmd); if (err) { dev_err(&adapter->pdev->dev, "Failed to create rx ctx in firmware%d\n", err); goto out_free_rsp; } - prsp_rds = ((struct qlcnic_cardrsp_rds_ring *) &prsp->data[le32_to_cpu(prsp->rds_ring_offset)]); @@ -373,6 +358,7 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter) out_free_rsp: dma_free_coherent(&adapter->pdev->dev, rsp_size, prsp, cardrsp_phys_addr); + qlcnic_free_mbx_args(&cmd); out_free_rq: dma_free_coherent(&adapter->pdev->dev, rq_size, prq, hostrq_phys_addr); return err; @@ -381,24 +367,24 @@ out_free_rq: static void qlcnic_fw_cmd_destroy_rx_ctx(struct qlcnic_adapter *adapter) { + int err; struct qlcnic_cmd_args cmd; struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.arg1 = recv_ctx->context_id; - cmd.req.arg2 = QLCNIC_DESTROY_CTX_RESET; - cmd.req.arg3 = 0; - cmd.req.cmd = QLCNIC_CDRP_CMD_DESTROY_RX_CTX; - qlcnic_issue_cmd(adapter, &cmd); - if (cmd.rsp.cmd) + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_DESTROY_RX_CTX); + cmd.req.arg[1] = recv_ctx->context_id; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) dev_err(&adapter->pdev->dev, "Failed to destroy rx ctx in firmware\n"); recv_ctx->state = QLCNIC_HOST_CTX_STATE_FREED; + qlcnic_free_mbx_args(&cmd); } -static int -qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter) +int qlcnic_82xx_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *tx_ring, + int ring) { struct qlcnic_hostrq_tx_ctx *prq; struct qlcnic_hostrq_cds_ring *prq_cds; @@ -410,7 +396,6 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter) int err; u64 phys_addr; dma_addr_t rq_phys_addr, rsp_phys_addr; - struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring; /* reset host resources */ tx_ring->producer = 0; @@ -445,9 +430,9 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter) prq->host_int_crb_mode = cpu_to_le32(QLCNIC_HOST_INT_CRB_MODE_SHARED); + prq->msi_index = 0; prq->interrupt_ctl = 0; - prq->msi_index = 0; prq->cmd_cons_dma_addr = cpu_to_le64(tx_ring->hw_cons_phys_addr); prq_cds = &prq->cds_ring; @@ -456,19 +441,17 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter) prq_cds->ring_size = cpu_to_le32(tx_ring->num_desc); phys_addr = rq_phys_addr; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.arg1 = (u32)(phys_addr >> 32); - cmd.req.arg2 = ((u32)phys_addr & 0xffffffff); - cmd.req.arg3 = rq_size; - cmd.req.cmd = QLCNIC_CDRP_CMD_CREATE_TX_CTX; - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CREATE_TX_CTX); + cmd.req.arg[1] = MSD(phys_addr); + cmd.req.arg[2] = LSD(phys_addr); + cmd.req.arg[3] = rq_size; + err = qlcnic_issue_cmd(adapter, &cmd); if (err == QLCNIC_RCODE_SUCCESS) { temp = le32_to_cpu(prsp->cds_ring.host_producer_crb); tx_ring->crb_cmd_producer = adapter->ahw->pci_base0 + temp; - - adapter->tx_ring->ctx_id = le16_to_cpu(prsp->context_id); + tx_ring->ctx_id = le16_to_cpu(prsp->context_id); } else { dev_err(&adapter->pdev->dev, "Failed to create tx ctx in firmware%d\n", err); @@ -476,41 +459,40 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter) } dma_free_coherent(&adapter->pdev->dev, rsp_size, rsp_addr, - rsp_phys_addr); + rsp_phys_addr); out_free_rq: dma_free_coherent(&adapter->pdev->dev, rq_size, rq_addr, rq_phys_addr); + qlcnic_free_mbx_args(&cmd); return err; } static void -qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter) +qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *tx_ring) { struct qlcnic_cmd_args cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.arg1 = adapter->tx_ring->ctx_id; - cmd.req.arg2 = QLCNIC_DESTROY_CTX_RESET; - cmd.req.arg3 = 0; - cmd.req.cmd = QLCNIC_CDRP_CMD_DESTROY_TX_CTX; - qlcnic_issue_cmd(adapter, &cmd); - if (cmd.rsp.cmd) + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_DESTROY_TX_CTX); + cmd.req.arg[1] = tx_ring->ctx_id; + if (qlcnic_issue_cmd(adapter, &cmd)) dev_err(&adapter->pdev->dev, "Failed to destroy tx ctx in firmware\n"); + qlcnic_free_mbx_args(&cmd); } int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config) { + int err; struct qlcnic_cmd_args cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.arg1 = config; - cmd.req.cmd = QLCNIC_CDRP_CMD_CONFIG_PORT; - qlcnic_issue_cmd(adapter, &cmd); - - return cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIG_PORT); + cmd.req.arg[1] = config; + err = qlcnic_issue_cmd(adapter, &cmd); + qlcnic_free_mbx_args(&cmd); + return err; } int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter) @@ -584,36 +566,49 @@ err_out_free: return err; } - -int qlcnic_fw_create_ctx(struct qlcnic_adapter *adapter) +int qlcnic_fw_create_ctx(struct qlcnic_adapter *dev) { - int err; + int i, err, ring; - if (adapter->flags & QLCNIC_NEED_FLR) { - pci_reset_function(adapter->pdev); - adapter->flags &= ~QLCNIC_NEED_FLR; + if (dev->flags & QLCNIC_NEED_FLR) { + pci_reset_function(dev->pdev); + dev->flags &= ~QLCNIC_NEED_FLR; } - err = qlcnic_fw_cmd_create_rx_ctx(adapter); + err = qlcnic_fw_cmd_create_rx_ctx(dev); if (err) return err; - err = qlcnic_fw_cmd_create_tx_ctx(adapter); - if (err) { - qlcnic_fw_cmd_destroy_rx_ctx(adapter); - return err; + for (ring = 0; ring < dev->max_drv_tx_rings; ring++) { + err = qlcnic_fw_cmd_create_tx_ctx(dev, + &dev->tx_ring[ring], + ring); + if (err) { + qlcnic_fw_cmd_destroy_rx_ctx(dev); + if (ring == 0) + return err; + + for (i = 0; i < ring; i++) + qlcnic_fw_cmd_destroy_tx_ctx(dev, + &dev->tx_ring[i]); + + return err; + } } - set_bit(__QLCNIC_FW_ATTACHED, &adapter->state); + set_bit(__QLCNIC_FW_ATTACHED, &dev->state); return 0; } void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) { + int ring; + if (test_and_clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state)) { qlcnic_fw_cmd_destroy_rx_ctx(adapter); - qlcnic_fw_cmd_destroy_tx_ctx(adapter); - + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) + qlcnic_fw_cmd_destroy_tx_ctx(adapter, + &adapter->tx_ring[ring]); /* Allow dma queues to drain after context reset */ mdelay(20); } @@ -671,40 +666,43 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter) } -/* Get MAC address of a NIC partition */ -int qlcnic_get_mac_address(struct qlcnic_adapter *adapter, u8 *mac) +int qlcnic_82xx_get_mac_address(struct qlcnic_adapter *adapter, u8 *mac) { - int err; + int err, i; struct qlcnic_cmd_args cmd; + u32 mac_low, mac_high; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.arg1 = adapter->ahw->pci_func | BIT_8; - cmd.req.cmd = QLCNIC_CDRP_CMD_MAC_ADDRESS; - cmd.rsp.arg1 = cmd.rsp.arg2 = 1; - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_MAC_ADDRESS); + cmd.req.arg[1] = adapter->ahw->pci_func | BIT_8; + err = qlcnic_issue_cmd(adapter, &cmd); - if (err == QLCNIC_RCODE_SUCCESS) - qlcnic_fetch_mac(cmd.rsp.arg1, cmd.rsp.arg2, 0, mac); - else { + if (err == QLCNIC_RCODE_SUCCESS) { + mac_low = cmd.rsp.arg[1]; + mac_high = cmd.rsp.arg[2]; + + for (i = 0; i < 2; i++) + mac[i] = (u8) (mac_high >> ((1 - i) * 8)); + for (i = 2; i < 6; i++) + mac[i] = (u8) (mac_low >> ((5 - i) * 8)); + } else { dev_err(&adapter->pdev->dev, "Failed to get mac address%d\n", err); err = -EIO; } - + qlcnic_free_mbx_args(&cmd); return err; } /* Get info of a NIC partition */ -int qlcnic_get_nic_info(struct qlcnic_adapter *adapter, - struct qlcnic_info *npar_info, u8 func_id) +int qlcnic_82xx_get_nic_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *npar_info, u8 func_id) { int err; dma_addr_t nic_dma_t; - struct qlcnic_info_le *nic_info; + const struct qlcnic_info_le *nic_info; void *nic_info_addr; struct qlcnic_cmd_args cmd; - size_t nic_size = sizeof(struct qlcnic_info_le); + size_t nic_size = sizeof(struct qlcnic_info_le); nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size, &nic_dma_t, GFP_KERNEL); @@ -713,47 +711,39 @@ int qlcnic_get_nic_info(struct qlcnic_adapter *adapter, memset(nic_info_addr, 0, nic_size); nic_info = nic_info_addr; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_NIC_INFO; - cmd.req.arg1 = MSD(nic_dma_t); - cmd.req.arg2 = LSD(nic_dma_t); - cmd.req.arg3 = (func_id << 16 | nic_size); - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; - if (err == QLCNIC_RCODE_SUCCESS) { + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_NIC_INFO); + cmd.req.arg[1] = MSD(nic_dma_t); + cmd.req.arg[2] = LSD(nic_dma_t); + cmd.req.arg[3] = (func_id << 16 | nic_size); + err = qlcnic_issue_cmd(adapter, &cmd); + if (err != QLCNIC_RCODE_SUCCESS) { + dev_err(&adapter->pdev->dev, + "Failed to get nic info%d\n", err); + err = -EIO; + } else { npar_info->pci_func = le16_to_cpu(nic_info->pci_func); npar_info->op_mode = le16_to_cpu(nic_info->op_mode); + npar_info->min_tx_bw = le16_to_cpu(nic_info->min_tx_bw); + npar_info->max_tx_bw = le16_to_cpu(nic_info->max_tx_bw); npar_info->phys_port = le16_to_cpu(nic_info->phys_port); npar_info->switch_mode = le16_to_cpu(nic_info->switch_mode); npar_info->max_tx_ques = le16_to_cpu(nic_info->max_tx_ques); npar_info->max_rx_ques = le16_to_cpu(nic_info->max_rx_ques); - npar_info->min_tx_bw = le16_to_cpu(nic_info->min_tx_bw); - npar_info->max_tx_bw = le16_to_cpu(nic_info->max_tx_bw); npar_info->capabilities = le32_to_cpu(nic_info->capabilities); npar_info->max_mtu = le16_to_cpu(nic_info->max_mtu); - - dev_info(&adapter->pdev->dev, - "phy port: %d switch_mode: %d,\n" - "\tmax_tx_q: %d max_rx_q: %d min_tx_bw: 0x%x,\n" - "\tmax_tx_bw: 0x%x max_mtu:0x%x, capabilities: 0x%x\n", - npar_info->phys_port, npar_info->switch_mode, - npar_info->max_tx_ques, npar_info->max_rx_ques, - npar_info->min_tx_bw, npar_info->max_tx_bw, - npar_info->max_mtu, npar_info->capabilities); - } else { - dev_err(&adapter->pdev->dev, - "Failed to get nic info%d\n", err); - err = -EIO; } dma_free_coherent(&adapter->pdev->dev, nic_size, nic_info_addr, - nic_dma_t); + nic_dma_t); + qlcnic_free_mbx_args(&cmd); + return err; } /* Configure a NIC partition */ -int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic) +int qlcnic_82xx_set_nic_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *nic) { int err = -EIO; dma_addr_t nic_dma_t; @@ -784,13 +774,11 @@ int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic) nic_info->min_tx_bw = cpu_to_le16(nic->min_tx_bw); nic_info->max_tx_bw = cpu_to_le16(nic->max_tx_bw); - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_SET_NIC_INFO; - cmd.req.arg1 = MSD(nic_dma_t); - cmd.req.arg2 = LSD(nic_dma_t); - cmd.req.arg3 = ((nic->pci_func << 16) | nic_size); - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_NIC_INFO); + cmd.req.arg[1] = MSD(nic_dma_t); + cmd.req.arg[2] = LSD(nic_dma_t); + cmd.req.arg[3] = ((nic->pci_func << 16) | nic_size); + err = qlcnic_issue_cmd(adapter, &cmd); if (err != QLCNIC_RCODE_SUCCESS) { dev_err(&adapter->pdev->dev, @@ -800,12 +788,14 @@ int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic) dma_free_coherent(&adapter->pdev->dev, nic_size, nic_info_addr, nic_dma_t); + qlcnic_free_mbx_args(&cmd); + return err; } /* Get PCI Info of a partition */ -int qlcnic_get_pci_info(struct qlcnic_adapter *adapter, - struct qlcnic_pci_info *pci_info) +int qlcnic_82xx_get_pci_info(struct qlcnic_adapter *adapter, + struct qlcnic_pci_info *pci_info) { int err = 0, i; struct qlcnic_cmd_args cmd; @@ -822,13 +812,11 @@ int qlcnic_get_pci_info(struct qlcnic_adapter *adapter, memset(pci_info_addr, 0, pci_size); npar = pci_info_addr; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_PCI_INFO; - cmd.req.arg1 = MSD(pci_info_dma_t); - cmd.req.arg2 = LSD(pci_info_dma_t); - cmd.req.arg3 = pci_size; - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_PCI_INFO); + cmd.req.arg[1] = MSD(pci_info_dma_t); + cmd.req.arg[2] = LSD(pci_info_dma_t); + cmd.req.arg[3] = pci_size; + err = qlcnic_issue_cmd(adapter, &cmd); adapter->ahw->act_pci_func = 0; if (err == QLCNIC_RCODE_SUCCESS) { @@ -854,6 +842,8 @@ int qlcnic_get_pci_info(struct qlcnic_adapter *adapter, dma_free_coherent(&adapter->pdev->dev, pci_size, pci_info_addr, pci_info_dma_t); + qlcnic_free_mbx_args(&cmd); + return err; } @@ -872,21 +862,19 @@ int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id, arg1 = id | (enable_mirroring ? BIT_4 : 0); arg1 |= pci_func << 8; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_SET_PORTMIRRORING; - cmd.req.arg1 = arg1; - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_PORTMIRRORING); + cmd.req.arg[1] = arg1; + err = qlcnic_issue_cmd(adapter, &cmd); - if (err != QLCNIC_RCODE_SUCCESS) { + if (err != QLCNIC_RCODE_SUCCESS) dev_err(&adapter->pdev->dev, "Failed to configure port mirroring%d on eswitch:%d\n", pci_func, id); - } else { + else dev_info(&adapter->pdev->dev, "Configured eSwitch %d for port mirroring:%d\n", id, pci_func); - } + qlcnic_free_mbx_args(&cmd); return err; } @@ -923,13 +911,11 @@ int qlcnic_get_port_stats(struct qlcnic_adapter *adapter, const u8 func, arg1 = func | QLCNIC_STATS_VERSION << 8 | QLCNIC_STATS_PORT << 12; arg1 |= rx_tx << 15 | stats_size << 16; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_ESWITCH_STATS; - cmd.req.arg1 = arg1; - cmd.req.arg2 = MSD(stats_dma_t); - cmd.req.arg3 = LSD(stats_dma_t); - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_ESWITCH_STATS); + cmd.req.arg[1] = arg1; + cmd.req.arg[2] = MSD(stats_dma_t); + cmd.req.arg[3] = LSD(stats_dma_t); + err = qlcnic_issue_cmd(adapter, &cmd); if (!err) { stats = stats_addr; @@ -949,6 +935,8 @@ int qlcnic_get_port_stats(struct qlcnic_adapter *adapter, const u8 func, dma_free_coherent(&adapter->pdev->dev, stats_size, stats_addr, stats_dma_t); + qlcnic_free_mbx_args(&cmd); + return err; } @@ -963,6 +951,9 @@ int qlcnic_get_mac_stats(struct qlcnic_adapter *adapter, void *stats_addr; int err; + if (mac_stats == NULL) + return -ENOMEM; + stats_addr = dma_alloc_coherent(&adapter->pdev->dev, stats_size, &stats_dma_t, GFP_KERNEL); if (!stats_addr) { @@ -971,15 +962,11 @@ int qlcnic_get_mac_stats(struct qlcnic_adapter *adapter, return -ENOMEM; } memset(stats_addr, 0, stats_size); - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_MAC_STATS; - cmd.req.arg1 = stats_size << 16; - cmd.req.arg2 = MSD(stats_dma_t); - cmd.req.arg3 = LSD(stats_dma_t); - - qlcnic_issue_cmd(adapter, &cmd); - err = cmd.rsp.cmd; - + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_MAC_STATS); + cmd.req.arg[1] = stats_size << 16; + cmd.req.arg[2] = MSD(stats_dma_t); + cmd.req.arg[3] = LSD(stats_dma_t); + err = qlcnic_issue_cmd(adapter, &cmd); if (!err) { stats = stats_addr; mac_stats->mac_tx_frames = le64_to_cpu(stats->mac_tx_frames); @@ -1001,10 +988,16 @@ int qlcnic_get_mac_stats(struct qlcnic_adapter *adapter, mac_stats->mac_rx_jabber = le64_to_cpu(stats->mac_rx_jabber); mac_stats->mac_rx_dropped = le64_to_cpu(stats->mac_rx_dropped); mac_stats->mac_rx_crc_error = le64_to_cpu(stats->mac_rx_crc_error); + } else { + dev_err(&adapter->pdev->dev, + "%s: Get mac stats failed, err=%d.\n", __func__, err); } dma_free_coherent(&adapter->pdev->dev, stats_size, stats_addr, stats_dma_t); + + qlcnic_free_mbx_args(&cmd); + return err; } @@ -1065,7 +1058,7 @@ int qlcnic_get_eswitch_stats(struct qlcnic_adapter *adapter, const u8 eswitch, int qlcnic_clear_esw_stats(struct qlcnic_adapter *adapter, const u8 func_esw, const u8 port, const u8 rx_tx) { - + int err; u32 arg1; struct qlcnic_cmd_args cmd; @@ -1088,15 +1081,16 @@ int qlcnic_clear_esw_stats(struct qlcnic_adapter *adapter, const u8 func_esw, arg1 = port | QLCNIC_STATS_VERSION << 8 | func_esw << 12; arg1 |= BIT_14 | rx_tx << 15; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_ESWITCH_STATS; - cmd.req.arg1 = arg1; - qlcnic_issue_cmd(adapter, &cmd); - return cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_ESWITCH_STATS); + cmd.req.arg[1] = arg1; + err = qlcnic_issue_cmd(adapter, &cmd); + qlcnic_free_mbx_args(&cmd); + return err; err_ret: - dev_err(&adapter->pdev->dev, "Invalid argument func_esw=%d port=%d" - "rx_ctx=%d\n", func_esw, port, rx_tx); + dev_err(&adapter->pdev->dev, + "Invalid args func_esw %d port %d rx_ctx %d\n", + func_esw, port, rx_tx); return -EIO; } @@ -1109,22 +1103,21 @@ __qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter, u8 pci_func; pci_func = (*arg1 >> 8); - cmd.req.cmd = QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG; - cmd.req.arg1 = *arg1; - cmd.rsp.arg1 = cmd.rsp.arg2 = 1; - qlcnic_issue_cmd(adapter, &cmd); - *arg1 = cmd.rsp.arg1; - *arg2 = cmd.rsp.arg2; - err = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_GET_ESWITCH_PORT_CONFIG); + cmd.req.arg[1] = *arg1; + err = qlcnic_issue_cmd(adapter, &cmd); + *arg1 = cmd.rsp.arg[1]; + *arg2 = cmd.rsp.arg[2]; + qlcnic_free_mbx_args(&cmd); - if (err == QLCNIC_RCODE_SUCCESS) { + if (err == QLCNIC_RCODE_SUCCESS) dev_info(&adapter->pdev->dev, - "eSwitch port config for pci func %d\n", pci_func); - } else { + "eSwitch port config for pci func %d\n", pci_func); + else dev_err(&adapter->pdev->dev, "Failed to get eswitch port config for pci func %d\n", pci_func); - } return err; } /* Configure eSwitch port @@ -1189,20 +1182,18 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter, return err; } - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH; - cmd.req.arg1 = arg1; - cmd.req.arg2 = arg2; - qlcnic_issue_cmd(adapter, &cmd); + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_ESWITCH); + cmd.req.arg[1] = arg1; + cmd.req.arg[2] = arg2; + err = qlcnic_issue_cmd(adapter, &cmd); + qlcnic_free_mbx_args(&cmd); - err = cmd.rsp.cmd; - if (err != QLCNIC_RCODE_SUCCESS) { + if (err != QLCNIC_RCODE_SUCCESS) dev_err(&adapter->pdev->dev, "Failed to configure eswitch pci func %d\n", pci_func); - } else { + else dev_info(&adapter->pdev->dev, - "Configured eSwitch for pci func %d\n", pci_func); - } + "Configured eSwitch for pci func %d\n", pci_func); return err; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 74b9811..064f36b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -705,20 +705,19 @@ static int qlcnic_irq_test(struct net_device *netdev) goto clear_it; adapter->ahw->diag_cnt = 0; - memset(&cmd, 0, sizeof(cmd)); - cmd.req.cmd = QLCNIC_CDRP_CMD_INTRPT_TEST; - cmd.req.arg1 = adapter->ahw->pci_func; - qlcnic_issue_cmd(adapter, &cmd); - ret = cmd.rsp.cmd; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST); + + cmd.req.arg[1] = adapter->ahw->pci_func; + ret = qlcnic_issue_cmd(adapter, &cmd); if (ret) goto done; - msleep(10); - + usleep_range(1000, 12000); ret = !adapter->ahw->diag_cnt; done: + qlcnic_free_mbx_args(&cmd); qlcnic_diag_free_res(netdev, max_sds_rings); clear_it: @@ -845,7 +844,7 @@ static int qlcnic_loopback_test(struct net_device *netdev, u8 mode) ret = qlcnic_do_lb_test(adapter, mode); - qlcnic_clear_lb_mode(adapter); + qlcnic_clear_lb_mode(adapter, mode); free_res: qlcnic_diag_free_res(netdev, max_sds_rings); @@ -1307,7 +1306,7 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val) return 0; } netdev_info(netdev, "Forcing a FW dump\n"); - qlcnic_dev_request_reset(adapter); + qlcnic_dev_request_reset(adapter, 0); break; case QLCNIC_DISABLE_FW_DUMP: if (fw_dump->enable && fw_dump->tmpl_hdr) { @@ -1327,7 +1326,7 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val) return 0; case QLCNIC_FORCE_FW_RESET: netdev_info(netdev, "Forcing a FW reset\n"); - qlcnic_dev_request_reset(adapter); + qlcnic_dev_request_reset(adapter, 0); adapter->flags &= ~QLCNIC_FW_RESET_OWNER; return 0; case QLCNIC_SET_QUIESCENT: diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h index 49cc1ac..fa2b8c6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h @@ -11,6 +11,8 @@ #include #include +#include "qlcnic_hw.h" + /* * The basic unit of access when reading/writing control registers. */ @@ -568,6 +570,9 @@ enum { #define QLCNIC_REG(X) (NIC_CRB_BASE+(X)) #define QLCNIC_REG_2(X) (NIC_CRB_BASE_2+(X)) +#define QLCNIC_CDRP_MAX_ARGS 4 +#define QLCNIC_CDRP_ARG(i) (QLCNIC_REG(0x18 + ((i) * 4))) + #define QLCNIC_CDRP_CRB_OFFSET (QLCNIC_REG(0x18)) #define QLCNIC_ARG1_CRB_OFFSET (QLCNIC_REG(0x1c)) #define QLCNIC_ARG2_CRB_OFFSET (QLCNIC_REG(0x20)) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 7a6d5eb..284618b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -417,9 +417,8 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter, return 0; } -static int -qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr, - __le16 vlan_id, unsigned op) +int qlcnic_82xx_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr, + __le16 vlan_id, u8 op) { struct qlcnic_nic_req req; struct qlcnic_mac_req *mac_req; @@ -516,7 +515,7 @@ send_fw_cmd: qlcnic_nic_set_promisc(adapter, mode); } -int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode) +int qlcnic_82xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode) { struct qlcnic_nic_req req; u64 word; @@ -620,12 +619,13 @@ static int qlcnic_set_fw_loopback(struct qlcnic_adapter *adapter, u8 flag) return rv; } -int qlcnic_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) +int qlcnic_82xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) { if (qlcnic_set_fw_loopback(adapter, mode)) return -EIO; - if (qlcnic_nic_set_promisc(adapter, VPORT_MISS_MODE_ACCEPT_ALL)) { + if (qlcnic_nic_set_promisc(adapter, + VPORT_MISS_MODE_ACCEPT_ALL)) { qlcnic_set_fw_loopback(adapter, 0); return -EIO; } @@ -634,11 +634,11 @@ int qlcnic_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) return 0; } -void qlcnic_clear_lb_mode(struct qlcnic_adapter *adapter) +int qlcnic_82xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode) { - int mode = VPORT_MISS_MODE_DROP; struct net_device *netdev = adapter->netdev; + mode = VPORT_MISS_MODE_DROP; qlcnic_set_fw_loopback(adapter, 0); if (netdev->flags & IFF_PROMISC) @@ -648,12 +648,13 @@ void qlcnic_clear_lb_mode(struct qlcnic_adapter *adapter) qlcnic_nic_set_promisc(adapter, mode); msleep(1000); + return 0; } /* * Send the interrupt coalescing parameter set by ethtool to the card. */ -int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter) +void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter) { struct qlcnic_nic_req req; int rv; @@ -675,10 +676,9 @@ int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter) if (rv != 0) dev_err(&adapter->netdev->dev, "Could not send interrupt coalescing parameters\n"); - return rv; } -int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable) +int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) { struct qlcnic_nic_req req; u64 word; @@ -736,7 +736,7 @@ int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable) #define RSS_HASHTYPE_IP_TCP 0x3 -int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable) +int qlcnic_82xx_config_rss(struct qlcnic_adapter *adapter, int enable) { struct qlcnic_nic_req req; u64 word; @@ -779,7 +779,8 @@ int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable) return rv; } -int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, int cmd) +void qlcnic_82xx_config_ipaddr(struct qlcnic_adapter *adapter, + __be32 ip, int cmd) { struct qlcnic_nic_req req; struct qlcnic_ipaddr *ipa; @@ -801,23 +802,19 @@ int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, int cmd) dev_err(&adapter->netdev->dev, "could not notify %s IP 0x%x reuqest\n", (cmd == QLCNIC_IP_UP) ? "Add" : "Remove", ip); - - return rv; } -int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable) +int qlcnic_82xx_linkevent_request(struct qlcnic_adapter *adapter, int enable) { struct qlcnic_nic_req req; u64 word; int rv; - memset(&req, 0, sizeof(struct qlcnic_nic_req)); req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23); word = QLCNIC_H2C_OPCODE_GET_LINKEVENT | ((u64)adapter->portnum << 16); req.req_hdr = cpu_to_le64(word); req.words[0] = cpu_to_le64(enable | (enable << 8)); - rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1); if (rv != 0) dev_err(&adapter->netdev->dev, @@ -981,8 +978,8 @@ qlcnic_pci_set_crbwindow_2M(struct qlcnic_adapter *adapter, ulong off) return 0; } -int -qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, u32 data) +int qlcnic_82xx_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, + u32 data) { unsigned long flags; int rv; @@ -1013,7 +1010,7 @@ qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, u32 data) return -EIO; } -int qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off) +int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off) { unsigned long flags; int rv; @@ -1042,7 +1039,6 @@ int qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off) return -1; } - void __iomem *qlcnic_get_ioaddr(struct qlcnic_hardware_context *ahw, u32 offset) { @@ -1268,7 +1264,7 @@ int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *adapter, u64 off, u64 *data) return ret; } -int qlcnic_get_board_info(struct qlcnic_adapter *adapter) +int qlcnic_82xx_get_board_info(struct qlcnic_adapter *adapter) { int offset, board_type, magic; struct pci_dev *pdev = adapter->pdev; @@ -1341,7 +1337,7 @@ qlcnic_wol_supported(struct qlcnic_adapter *adapter) return 0; } -int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate) +int qlcnic_82xx_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate) { struct qlcnic_nic_req req; int rv; @@ -1362,3 +1358,56 @@ int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate) return rv; } + +void qlcnic_82xx_get_func_no(struct qlcnic_adapter *adapter) +{ + void __iomem *msix_base_addr; + u32 func; + u32 msix_base; + + pci_read_config_dword(adapter->pdev, QLCNIC_MSIX_TABLE_OFFSET, &func); + msix_base_addr = adapter->ahw->pci_base0 + QLCNIC_MSIX_BASE; + msix_base = readl(msix_base_addr); + func = (func - msix_base) / QLCNIC_MSIX_TBL_PGSIZE; + adapter->ahw->pci_func = func; +} + +void qlcnic_82xx_read_crb(struct qlcnic_adapter *adapter, char *buf, + loff_t offset, size_t size) +{ + u32 data; + u64 qmdata; + + if (ADDR_IN_RANGE(offset, QLCNIC_PCI_CAMQM, QLCNIC_PCI_CAMQM_END)) { + qlcnic_pci_camqm_read_2M(adapter, offset, &qmdata); + memcpy(buf, &qmdata, size); + } else { + data = QLCRD32(adapter, offset); + memcpy(buf, &data, size); + } +} + +void qlcnic_82xx_write_crb(struct qlcnic_adapter *adapter, char *buf, + loff_t offset, size_t size) +{ + u32 data; + u64 qmdata; + + if (ADDR_IN_RANGE(offset, QLCNIC_PCI_CAMQM, QLCNIC_PCI_CAMQM_END)) { + memcpy(&qmdata, buf, size); + qlcnic_pci_camqm_write_2M(adapter, offset, qmdata); + } else { + memcpy(&data, buf, size); + QLCWR32(adapter, offset, data); + } +} + +int qlcnic_82xx_api_lock(struct qlcnic_adapter *adapter) +{ + return qlcnic_pcie_sem_lock(adapter, 5, 0); +} + +void qlcnic_82xx_api_unlock(struct qlcnic_adapter *adapter) +{ + qlcnic_pcie_sem_unlock(adapter, 5); +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h new file mode 100644 index 0000000..2b9537d --- /dev/null +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -0,0 +1,161 @@ +#ifndef __QLCNIC_HW_H +#define __QLCNIC_HW_H + +/* Common registers in 83xx and 82xx */ +enum qlcnic_regs { + QLCNIC_PEG_HALT_STATUS1 = 0, + QLCNIC_PEG_HALT_STATUS2, + QLCNIC_PEG_ALIVE_COUNTER, + QLCNIC_FLASH_LOCK_OWNER, + QLCNIC_FW_CAPABILITIES, + QLCNIC_CRB_DRV_ACTIVE, + QLCNIC_CRB_DEV_STATE, + QLCNIC_CRB_DRV_STATE, + QLCNIC_CRB_DRV_SCRATCH, + QLCNIC_CRB_DEV_PARTITION_INFO, + QLCNIC_CRB_DRV_IDC_VER, + QLCNIC_FW_VERSION_MAJOR, + QLCNIC_FW_VERSION_MINOR, + QLCNIC_FW_VERSION_SUB, + QLCNIC_CRB_DEV_NPAR_STATE, + QLCNIC_FW_IMG_VALID, + QLCNIC_CMDPEG_STATE, + QLCNIC_RCVPEG_STATE, + QLCNIC_ASIC_TEMP, + QLCNIC_FW_API, + QLCNIC_DRV_OP_MODE, + QLCNIC_FLASH_LOCK, + QLCNIC_FLASH_UNLOCK, +}; + +#define QLCNIC_CMD_CONFIGURE_IP_ADDR 0x1 +#define QLCNIC_CMD_CONFIG_INTRPT 0x2 +#define QLCNIC_CMD_CREATE_RX_CTX 0x7 +#define QLCNIC_CMD_DESTROY_RX_CTX 0x8 +#define QLCNIC_CMD_CREATE_TX_CTX 0x9 +#define QLCNIC_CMD_DESTROY_TX_CTX 0xa +#define QLCNIC_CMD_CONFIGURE_LRO 0xC +#define QLCNIC_CMD_CONFIGURE_MAC_LEARNING 0xD +#define QLCNIC_CMD_GET_STATISTICS 0xF +#define QLCNIC_CMD_INTRPT_TEST 0x11 +#define QLCNIC_CMD_SET_MTU 0x12 +#define QLCNIC_CMD_READ_PHY 0x13 +#define QLCNIC_CMD_WRITE_PHY 0x14 +#define QLCNIC_CMD_READ_HW_REG 0x15 +#define QLCNIC_CMD_GET_FLOW_CTL 0x16 +#define QLCNIC_CMD_SET_FLOW_CTL 0x17 +#define QLCNIC_CMD_READ_MAX_MTU 0x18 +#define QLCNIC_CMD_READ_MAX_LRO 0x19 +#define QLCNIC_CMD_MAC_ADDRESS 0x1f +#define QLCNIC_CMD_GET_PCI_INFO 0x20 +#define QLCNIC_CMD_GET_NIC_INFO 0x21 +#define QLCNIC_CMD_SET_NIC_INFO 0x22 +#define QLCNIC_CMD_GET_ESWITCH_CAPABILITY 0x24 +#define QLCNIC_CMD_TOGGLE_ESWITCH 0x25 +#define QLCNIC_CMD_GET_ESWITCH_STATUS 0x26 +#define QLCNIC_CMD_SET_PORTMIRRORING 0x27 +#define QLCNIC_CMD_CONFIGURE_ESWITCH 0x28 +#define QLCNIC_CMD_GET_ESWITCH_PORT_CONFIG 0x29 +#define QLCNIC_CMD_GET_ESWITCH_STATS 0x2a +#define QLCNIC_CMD_CONFIG_PORT 0x2e +#define QLCNIC_CMD_TEMP_SIZE 0x2f +#define QLCNIC_CMD_GET_TEMP_HDR 0x30 +#define QLCNIC_CMD_GET_MAC_STATS 0x37 +#define QLCNIC_CMD_SET_DRV_VER 0x38 +#define QLCNIC_CMD_CONFIGURE_RSS 0x41 +#define QLCNIC_CMD_CONFIG_INTR_COAL 0x43 +#define QLCNIC_CMD_CONFIGURE_LED 0x44 +#define QLCNIC_CMD_CONFIG_MAC_VLAN 0x45 +#define QLCNIC_CMD_GET_LINK_EVENT 0x48 +#define QLCNIC_CMD_CONFIGURE_MAC_RX_MODE 0x49 +#define QLCNIC_CMD_CONFIGURE_HW_LRO 0x4A +#define QLCNIC_CMD_INIT_NIC_FUNC 0x60 +#define QLCNIC_CMD_STOP_NIC_FUNC 0x61 +#define QLCNIC_CMD_IDC_ACK 0x63 +#define QLCNIC_CMD_SET_PORT_CONFIG 0x66 +#define QLCNIC_CMD_GET_PORT_CONFIG 0x67 +#define QLCNIC_CMD_GET_LINK_STATUS 0x68 +#define QLCNIC_CMD_SET_LED_CONFIG 0x69 +#define QLCNIC_CMD_GET_LED_CONFIG 0x6A + +#define QLCNIC_INTRPT_INTX 1 +#define QLCNIC_INTRPT_MSIX 3 +#define QLCNIC_INTRPT_ADD 1 +#define QLCNIC_INTRPT_DEL 2 + +#define QLCNIC_GET_CURRENT_MAC 1 +#define QLCNIC_SET_STATION_MAC 2 +#define QLCNIC_GET_DEFAULT_MAC 3 +#define QLCNIC_GET_FAC_DEF_MAC 4 +#define QLCNIC_SET_FAC_DEF_MAC 5 + +#define QLCNIC_MBX_LINK_EVENT 0x8001 +#define QLCNIC_MBX_COMP_EVENT 0x8100 +#define QLCNIC_MBX_REQUEST_EVENT 0x8101 +#define QLCNIC_MBX_TIME_EXTEND_EVENT 0x8102 +#define QLCNIC_MBX_SFP_INSERT_EVENT 0x8130 +#define QLCNIC_MBX_SFP_REMOVE_EVENT 0x8131 + +struct qlcnic_mailbox_metadata { + u32 cmd; + u32 in_args; + u32 out_args; +}; + +#define QLCNIC_MBX_RSP_OK 1 +#define QLCNIC_MBX_PORT_RSP_OK 0x1a + +struct qlcnic_pci_info; +struct qlcnic_info; +struct qlcnic_cmd_args; +struct ethtool_stats; +struct pci_device_id; +struct qlcnic_host_sds_ring; +struct qlcnic_host_tx_ring; +struct qlcnic_host_tx_ring; +struct qlcnic_hardware_context; +struct qlcnic_adapter; + +int qlcnic_82xx_start_firmware(struct qlcnic_adapter *); +int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong); +int qlcnic_82xx_hw_write_wx_2M(struct qlcnic_adapter *, ulong, u32); +int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int); +int qlcnic_82xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32); +int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter, + struct net_device *netdev); +void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, + u64 *uaddr, __le16 vlan_id); +void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter); +int qlcnic_82xx_config_rss(struct qlcnic_adapter *adapter, int); +void qlcnic_82xx_config_ipaddr(struct qlcnic_adapter *adapter, + __be32, int); +int qlcnic_82xx_linkevent_request(struct qlcnic_adapter *adapter, int); +void qlcnic_82xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring); +int qlcnic_82xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8); +int qlcnic_82xx_set_lb_mode(struct qlcnic_adapter *, u8); +void qlcnic_82xx_write_crb(struct qlcnic_adapter *, char *, loff_t, size_t); +void qlcnic_82xx_read_crb(struct qlcnic_adapter *, char *, loff_t, size_t); +void qlcnic_82xx_dev_request_reset(struct qlcnic_adapter *, u32); +int qlcnic_82xx_setup_intr(struct qlcnic_adapter *, u8); +irqreturn_t qlcnic_82xx_clear_legacy_intr(struct qlcnic_adapter *); +int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *); +int qlcnic_82xx_fw_cmd_create_rx_ctx(struct qlcnic_adapter *); +int qlcnic_82xx_fw_cmd_create_tx_ctx(struct qlcnic_adapter *, + struct qlcnic_host_tx_ring *tx_ring, int); +int qlcnic_82xx_sre_macaddr_change(struct qlcnic_adapter *, u8 *, __le16, u8); +int qlcnic_82xx_get_mac_address(struct qlcnic_adapter *, u8*); +int qlcnic_82xx_get_nic_info(struct qlcnic_adapter *, struct qlcnic_info *, u8); +int qlcnic_82xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *); +int qlcnic_82xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info*); +int qlcnic_82xx_alloc_mbx_args(struct qlcnic_cmd_args *, + struct qlcnic_adapter *, u32); +int qlcnic_82xx_hw_write_wx_2M(struct qlcnic_adapter *, ulong, u32); +int qlcnic_82xx_get_board_info(struct qlcnic_adapter *); +int qlcnic_82xx_config_led(struct qlcnic_adapter *, u32, u32); +void qlcnic_82xx_get_func_no(struct qlcnic_adapter *); +int qlcnic_82xx_api_lock(struct qlcnic_adapter *); +void qlcnic_82xx_api_unlock(struct qlcnic_adapter *); +void qlcnic_82xx_napi_enable(struct qlcnic_adapter *); +void qlcnic_82xx_napi_disable(struct qlcnic_adapter *); +#endif /* __QLCNIC_HW_H_ */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 6f82812..8d9202f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -95,14 +95,14 @@ #define STATUS_CKSUM_LOOP 0 #define STATUS_CKSUM_OK 2 -static void qlcnic_change_filter(struct qlcnic_adapter *adapter, - u64 uaddr, __le16 vlan_id, - struct qlcnic_host_tx_ring *tx_ring) +void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, + __le16 vlan_id) { struct cmd_desc_type0 *hwdesc; struct qlcnic_nic_req *req; struct qlcnic_mac_req *mac_req; struct qlcnic_vlan_req *vlan_req; + struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring; u32 producer; u64 word; @@ -132,21 +132,21 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, struct cmd_desc_type0 *first_desc, struct sk_buff *skb) { - struct ethhdr *phdr = (struct ethhdr *)(skb->data); struct qlcnic_filter *fil, *tmp_fil; struct hlist_node *tmp_hnode, *n; struct hlist_head *head; + struct ethhdr *phdr = (struct ethhdr *)(skb->data); u64 src_addr = 0; __le16 vlan_id = 0; u8 hindex; - if (ether_addr_equal(phdr->h_source, adapter->mac_addr)) + if (!compare_ether_addr(phdr->h_source, adapter->mac_addr)) return; if (adapter->fhash.fnum >= adapter->fhash.fmax) return; - /* Only NPAR capable devices support vlan based learning*/ + /* Only NPAR capable devices support vlan based learning */ if (adapter->flags & QLCNIC_ESWITCH_ENABLED) vlan_id = first_desc->vlan_TCI; memcpy(&src_addr, phdr->h_source, ETH_ALEN); @@ -155,11 +155,10 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) { if (!memcmp(tmp_fil->faddr, &src_addr, ETH_ALEN) && - tmp_fil->vlan_id == vlan_id) { - + tmp_fil->vlan_id == vlan_id) { if (jiffies > (QLCNIC_READD_AGE * HZ + tmp_fil->ftime)) - qlcnic_change_filter(adapter, src_addr, vlan_id, - tx_ring); + qlcnic_change_filter(adapter, &src_addr, + vlan_id); tmp_fil->ftime = jiffies; return; } @@ -169,17 +168,13 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, if (!fil) return; - qlcnic_change_filter(adapter, src_addr, vlan_id, tx_ring); - + qlcnic_change_filter(adapter, &src_addr, vlan_id); fil->ftime = jiffies; fil->vlan_id = vlan_id; memcpy(fil->faddr, &src_addr, ETH_ALEN); - spin_lock(&adapter->mac_learn_lock); - hlist_add_head(&(fil->fnode), head); adapter->fhash.fnum++; - spin_unlock(&adapter->mac_learn_lock); } @@ -492,7 +487,8 @@ drop_packet: return NETDEV_TX_OK; } -void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup) +static void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, + int linkup) { struct net_device *netdev = adapter->netdev; @@ -1180,7 +1176,7 @@ static void qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter, int ring, return; } -void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) +void qlcnic_82xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) { struct qlcnic_adapter *adapter = sds_ring->adapter; struct status_desc *desc; @@ -1217,26 +1213,8 @@ void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) writel(consumer, sds_ring->crb_sts_consumer); } -void qlcnic_fetch_mac(u32 off1, u32 off2, u8 alt_mac, u8 *mac) -{ - u32 mac_low, mac_high; - int i; - - mac_low = off1; - mac_high = off2; - - if (alt_mac) { - mac_low |= (mac_low >> 16) | (mac_high << 16); - mac_high >>= 16; - } - - for (i = 0; i < 2; i++) - mac[i] = (u8)(mac_high >> ((1 - i) * 8)); - for (i = 2; i < 6; i++) - mac[i] = (u8)(mac_low >> ((5 - i) * 8)); -} - -int qlcnic_napi_add(struct qlcnic_adapter *adapter, struct net_device *netdev) +int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter, + struct net_device *netdev) { int ring, max_sds_rings; struct qlcnic_host_sds_ring *sds_ring; @@ -1275,7 +1253,7 @@ void qlcnic_napi_del(struct qlcnic_adapter *adapter) qlcnic_free_sds_rings(adapter->recv_ctx); } -void qlcnic_napi_enable(struct qlcnic_adapter *adapter) +void qlcnic_82xx_napi_enable(struct qlcnic_adapter *adapter) { int ring; struct qlcnic_host_sds_ring *sds_ring; @@ -1291,7 +1269,7 @@ void qlcnic_napi_enable(struct qlcnic_adapter *adapter) } } -void qlcnic_napi_disable(struct qlcnic_adapter *adapter) +void qlcnic_82xx_napi_disable(struct qlcnic_adapter *adapter) { int ring; struct qlcnic_host_sds_ring *sds_ring; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index d833f59..70d325c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -120,6 +120,32 @@ static const u32 msi_tgt_status[8] = { ISR_INT_TARGET_STATUS_F6, ISR_INT_TARGET_STATUS_F7 }; +static const u32 qlcnic_reg_tbl[] = { + 0x1B20A8, /* PEG_HALT_STAT1 */ + 0x1B20AC, /* PEG_HALT_STAT2 */ + 0x1B20B0, /* FW_HEARTBEAT */ + 0x1B2100, /* LOCK ID */ + 0x1B2128, /* FW_CAPABILITIES */ + 0x1B2138, /* drv active */ + 0x1B2140, /* dev state */ + 0x1B2144, /* drv state */ + 0x1B2148, /* drv scratch */ + 0x1B214C, /* dev partition info */ + 0x1B2174, /* drv idc ver */ + 0x1B2150, /* fw version major */ + 0x1B2154, /* fw version minor */ + 0x1B2158, /* fw version sub */ + 0x1B219C, /* npar state */ + 0x1B21FC, /* FW_IMG_VALID */ + 0x1B2250, /* CMD_PEG_STATE */ + 0x1B233C, /* RCV_PEG_STATE */ + 0x1B23B4, /* ASIC TEMP */ + 0x1B216C, /* FW api */ + 0x1B2170, /* drv op mode */ + 0x13C010, /* flash lock */ + 0x13C014, /* flash unlock */ +}; + static const struct qlcnic_board_info qlcnic_boards[] = { {0x1077, 0x8020, 0x1077, 0x203, "8200 Series Single Port 10GbE Converged Network Adapter" @@ -164,11 +190,6 @@ void qlcnic_free_sds_rings(struct qlcnic_recv_context *recv_ctx) recv_ctx->sds_rings = NULL; } -static void qlcnic_clear_stats(struct qlcnic_adapter *adapter) -{ - memset(&adapter->stats, 0, sizeof(adapter->stats)); -} - static void qlcnic_set_msix_bit(struct pci_dev *pdev, int enable) { u32 control; @@ -243,6 +264,14 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p) return 0; } +static void qlcnic_82xx_cancel_idc_work(struct qlcnic_adapter *adapter) +{ + while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) + usleep_range(10000, 11000); + + cancel_delayed_work_sync(&adapter->fw_work); +} + static const struct net_device_ops qlcnic_netdev_ops = { .ndo_open = qlcnic_open, .ndo_stop = qlcnic_close, @@ -267,15 +296,54 @@ static const struct net_device_ops qlcnic_netdev_failed_ops = { }; static struct qlcnic_nic_template qlcnic_ops = { - .config_bridged_mode = qlcnic_config_bridged_mode, - .config_led = qlcnic_config_led, - .start_firmware = qlcnic_start_firmware + .config_bridged_mode = qlcnic_config_bridged_mode, + .config_led = qlcnic_82xx_config_led, + .start_firmware = qlcnic_82xx_start_firmware, + .request_reset = qlcnic_82xx_dev_request_reset, + .cancel_idc_work = qlcnic_82xx_cancel_idc_work, + .napi_add = qlcnic_82xx_napi_add, + .config_ipaddr = qlcnic_82xx_config_ipaddr, + .clear_legacy_intr = qlcnic_82xx_clear_legacy_intr, +}; + +struct qlcnic_nic_template qlcnic_vf_ops = { + .config_bridged_mode = qlcnicvf_config_bridged_mode, + .config_led = qlcnicvf_config_led, + .start_firmware = qlcnicvf_start_firmware }; -static struct qlcnic_nic_template qlcnic_vf_ops = { - .config_bridged_mode = qlcnicvf_config_bridged_mode, - .config_led = qlcnicvf_config_led, - .start_firmware = qlcnicvf_start_firmware +static struct qlcnic_hardware_ops qlcnic_hw_ops = { + .read_crb = qlcnic_82xx_read_crb, + .write_crb = qlcnic_82xx_write_crb, + .read_reg = qlcnic_82xx_hw_read_wx_2M, + .write_reg = qlcnic_82xx_hw_write_wx_2M, + .get_mac_address = qlcnic_82xx_get_mac_address, + .setup_intr = qlcnic_82xx_setup_intr, + .alloc_mbx_args = qlcnic_82xx_alloc_mbx_args, + .mbx_cmd = qlcnic_82xx_issue_cmd, + .get_func_no = qlcnic_82xx_get_func_no, + .api_lock = qlcnic_82xx_api_lock, + .api_unlock = qlcnic_82xx_api_unlock, + .add_sysfs = qlcnic_82xx_add_sysfs, + .remove_sysfs = qlcnic_82xx_remove_sysfs, + .process_lb_rcv_ring_diag = qlcnic_82xx_process_rcv_ring_diag, + .create_rx_ctx = qlcnic_82xx_fw_cmd_create_rx_ctx, + .create_tx_ctx = qlcnic_82xx_fw_cmd_create_tx_ctx, + .setup_link_event = qlcnic_82xx_linkevent_request, + .get_nic_info = qlcnic_82xx_get_nic_info, + .get_pci_info = qlcnic_82xx_get_pci_info, + .set_nic_info = qlcnic_82xx_set_nic_info, + .change_macvlan = qlcnic_82xx_sre_macaddr_change, + .napi_enable = qlcnic_82xx_napi_enable, + .napi_disable = qlcnic_82xx_napi_disable, + .config_intr_coal = qlcnic_82xx_config_intr_coalesce, + .config_rss = qlcnic_82xx_config_rss, + .config_hw_lro = qlcnic_82xx_config_hw_lro, + .config_loopback = qlcnic_82xx_set_lb_mode, + .clear_loopback = qlcnic_82xx_clear_lb_mode, + .config_promisc_mode = qlcnic_82xx_nic_set_promisc, + .change_l2_filter = qlcnic_82xx_change_filter, + .get_board_info = qlcnic_82xx_get_board_info, }; static int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) @@ -338,21 +406,25 @@ static void qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter) adapter->msix_entries[0].vector = pdev->irq; } -static void -qlcnic_setup_intr(struct qlcnic_adapter *adapter) +int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) { - int num_msix; + int num_msix, err; - if (adapter->ahw->msix_supported) { + if (!num_intr) + num_intr = QLCNIC_DEF_NUM_STS_DESC_RINGS; + + if (adapter->ahw->msix_supported) num_msix = rounddown_pow_of_two(min_t(int, num_online_cpus(), - QLCNIC_DEF_NUM_STS_DESC_RINGS)); - } else + num_intr)); + else num_msix = 1; - if (!qlcnic_enable_msix(adapter, num_msix)) - return; + err = qlcnic_enable_msix(adapter, num_msix); + if (err == -ENOMEM || !err) + return err; qlcnic_enable_msi_legacy(adapter); + return 0; } static void @@ -371,6 +443,34 @@ qlcnic_cleanup_pci_map(struct qlcnic_adapter *adapter) iounmap(adapter->ahw->pci_base0); } +static int qlcnic_get_act_pci_func(struct qlcnic_adapter *adapter) +{ + struct qlcnic_pci_info *pci_info; + int ret; + + if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + switch (adapter->ahw->port_type) { + case QLCNIC_GBE: + adapter->ahw->act_pci_func = QLCNIC_NIU_MAX_GBE_PORTS; + break; + case QLCNIC_XGBE: + adapter->ahw->act_pci_func = QLCNIC_NIU_MAX_XG_PORTS; + break; + } + return 0; + } + + if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC) + return 0; + + pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL); + if (!pci_info) + return -ENOMEM; + + ret = qlcnic_get_pci_info(adapter, pci_info); + kfree(pci_info); + return ret; +} static int qlcnic_init_pci_info(struct qlcnic_adapter *adapter) { struct qlcnic_pci_info *pci_info; @@ -547,6 +647,7 @@ static int qlcnic_setup_pci_map(struct pci_dev *pdev, } dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20)); + ahw->pci_base0 = mem_ptr0; ahw->pci_len0 = pci_len0; offset = QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(ahw->pci_func)); @@ -944,8 +1045,7 @@ qlcnic_set_mgmt_operations(struct qlcnic_adapter *adapter) return err; } -static int -qlcnic_start_firmware(struct qlcnic_adapter *adapter) +int qlcnic_82xx_start_firmware(struct qlcnic_adapter *adapter) { int err; @@ -1493,13 +1593,13 @@ qlcnic_alloc_msix_entries(struct qlcnic_adapter *adapter, u16 count) return -ENOMEM; } -static int +static int __devinit qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev = NULL; struct qlcnic_adapter *adapter = NULL; + struct qlcnic_hardware_context *ahw; int err, pci_using_dac = -1; - uint8_t revision_id; char board_name[QLCNIC_MAX_BOARD_NAME_LEN]; err = pci_enable_device(pdev); @@ -1522,10 +1622,23 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); pci_enable_pcie_error_reporting(pdev); + ahw = kzalloc(sizeof(struct qlcnic_hardware_context), GFP_KERNEL); + if (!ahw) + goto err_out_free_res; + + if (ent->device == PCI_DEVICE_ID_QLOGIC_QLE824X) { + ahw->hw_ops = &qlcnic_hw_ops; + ahw->reg_tbl = (u32 *)qlcnic_reg_tbl; + } + + err = qlcnic_setup_pci_map(pdev, ahw); + if (err) + goto err_out_free_hw_res; + netdev = alloc_etherdev(sizeof(struct qlcnic_adapter)); if (!netdev) { err = -ENOMEM; - goto err_out_free_res; + goto err_out_iounmap; } SET_NETDEV_DEV(netdev, &pdev->dev); @@ -1539,9 +1652,9 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_netdev; adapter->dev_rst_time = jiffies; - revision_id = pdev->revision; - adapter->ahw->revision_id = revision_id; + adapter->ahw->revision_id = pdev->revision; adapter->mac_learn = qlcnic_mac_learn; + adapter->max_drv_tx_rings = 1; rwlock_init(&adapter->ahw->crb_lock); mutex_init(&adapter->ahw->mem_lock); @@ -1549,31 +1662,20 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) spin_lock_init(&adapter->tx_clean_lock); INIT_LIST_HEAD(&adapter->mac_list); - err = qlcnic_setup_pci_map(pdev, adapter->ahw); - if (err) - goto err_out_free_hw; - qlcnic_check_vf(adapter); - - /* This will be reset for mezz cards */ - adapter->portnum = adapter->ahw->pci_func; - - err = qlcnic_get_board_info(adapter); - if (err) { - dev_err(&pdev->dev, "Error getting board config info.\n"); - goto err_out_iounmap; - } - - err = qlcnic_setup_idc_param(adapter); - if (err) - goto err_out_iounmap; + if (qlcnic_82xx_check(adapter)) { + qlcnic_check_vf(adapter); + adapter->portnum = adapter->ahw->pci_func; + err = qlcnic_start_firmware(adapter); + if (err) { + dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n"); + goto err_out_free_hw; + } - adapter->flags |= QLCNIC_NEED_FLR; + err = qlcnic_setup_idc_param(adapter); + if (err) + goto err_out_free_hw; - err = adapter->nic_ops->start_firmware(adapter); - if (err) { - dev_err(&pdev->dev, "Loading fw failed. Please Reboot\n" - "\t\tIf reboot doesn't help, try flashing the card\n"); - goto err_out_maintenance_mode; + adapter->flags |= QLCNIC_NEED_FLR; } if (qlcnic_read_mac_addr(adapter)) @@ -1585,18 +1687,18 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) module_name(THIS_MODULE), board_name, adapter->ahw->revision_id); } - - qlcnic_clear_stats(adapter); - err = qlcnic_alloc_msix_entries(adapter, adapter->ahw->max_rx_ques); if (err) - goto err_out_decr_ref; + goto err_out_disable_msi; + + err = qlcnic_setup_intr(adapter, 0); + if (err) + goto err_out_disable_msi; - qlcnic_setup_intr(adapter); err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac); if (err) - goto err_out_disable_msi; + goto err_out_disable_mbx_intr; pci_set_drvdata(pdev, adapter); @@ -1615,29 +1717,35 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) break; } + if (qlcnic_get_act_pci_func(adapter)) + goto err_out_disable_mbx_intr; + if (adapter->mac_learn) qlcnic_alloc_lb_filters_mem(adapter); - qlcnic_create_diag_entries(adapter); + qlcnic_add_sysfs(adapter); return 0; +err_out_disable_mbx_intr: + err_out_disable_msi: qlcnic_teardown_intr(adapter); - kfree(adapter->msix_entries); - -err_out_decr_ref: + qlcnic_cancel_idc_work(adapter); qlcnic_clr_all_drv_state(adapter, 0); -err_out_iounmap: - qlcnic_cleanup_pci_map(adapter); - err_out_free_hw: qlcnic_free_adapter_resources(adapter); err_out_free_netdev: free_netdev(netdev); +err_out_iounmap: + qlcnic_cleanup_pci_map(adapter); + +err_out_free_hw_res: + kfree(ahw); + err_out_free_res: pci_release_regions(pdev); @@ -1645,18 +1753,6 @@ err_out_disable_pdev: pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); return err; - -err_out_maintenance_mode: - netdev->netdev_ops = &qlcnic_netdev_failed_ops; - SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_failed_ops); - err = register_netdev(netdev); - if (err) { - dev_err(&pdev->dev, "failed to register net device\n"); - goto err_out_decr_ref; - } - pci_set_drvdata(pdev, adapter); - qlcnic_create_diag_entries(adapter); - return 0; } static void qlcnic_remove(struct pci_dev *pdev) @@ -1933,7 +2029,7 @@ static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev) return stats; } -static irqreturn_t qlcnic_clear_legacy_intr(struct qlcnic_adapter *adapter) +irqreturn_t qlcnic_82xx_clear_legacy_intr(struct qlcnic_adapter *adapter) { u32 status; @@ -2313,7 +2409,7 @@ wait_npar: switch (dev_state) { case QLCNIC_DEV_READY: - if (!adapter->nic_ops->start_firmware(adapter)) { + if (!qlcnic_start_firmware(adapter)) { qlcnic_schedule_work(adapter, qlcnic_attach_work, 0); adapter->fw_wait_cnt = 0; return; @@ -2411,9 +2507,7 @@ qlcnic_set_npar_non_operational(struct qlcnic_adapter *adapter) qlcnic_api_unlock(adapter); } -/*Transit to RESET state from READY state only */ -void -qlcnic_dev_request_reset(struct qlcnic_adapter *adapter) +void qlcnic_82xx_dev_request_reset(struct qlcnic_adapter *adapter, u32 key) { u32 state, xg_val = 0, gb_val = 0; @@ -2536,7 +2630,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) goto detach; if (adapter->need_fw_reset) - qlcnic_dev_request_reset(adapter); + qlcnic_dev_request_reset(adapter, 0); state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); if (state == QLCNIC_DEV_NEED_RESET) { @@ -2565,7 +2659,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) adapter->flags |= QLCNIC_FW_HANG; - qlcnic_dev_request_reset(adapter); + qlcnic_dev_request_reset(adapter, 0); if (qlcnic_auto_fw_reset) clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state); @@ -2677,7 +2771,7 @@ static int qlcnic_attach_func(struct pci_dev *pdev) return err; qlcnic_clr_drv_state(adapter); - qlcnic_setup_intr(adapter); + qlcnic_setup_intr(adapter, 0); if (netif_running(netdev)) { err = qlcnic_attach(adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 341d37c..eeefc73 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -958,3 +958,13 @@ void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) device_remove_bin_file(dev, &bin_attr_pm_config); device_remove_bin_file(dev, &bin_attr_esw_stats); } + +void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter) +{ + qlcnic_create_diag_entries(adapter); +} + +void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter) +{ + qlcnic_remove_diag_entries(adapter); +} -- cgit v0.10.2 From a15ebd371992dbadb8a30367fd80cb5cd73b8fb1 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Tue, 1 Jan 2013 03:20:18 +0000 Subject: qlcnic: macros for common register access Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Use QLC_SHARED_REG_RD32 and QLC__SHARED_REG_WR32 macros for 82xx and 83xx common register access. Signed-off-by: Anirban Chakraborty Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 2b9537d..937d75f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -28,6 +28,14 @@ enum qlcnic_regs { QLCNIC_FLASH_UNLOCK, }; +/* Read from an address offset from BAR0, existing registers */ +#define QLC_SHARED_REG_RD32(a, addr) \ + readl(((a)->ahw->pci_base0) + ((a)->ahw->reg_tbl[addr])) + +/* Write to an address offset from BAR0, existing registers */ +#define QLC_SHARED_REG_WR32(a, addr, value) \ + writel(value, ((a)->ahw->pci_base0) + ((a)->ahw->reg_tbl[addr])) + #define QLCNIC_CMD_CONFIGURE_IP_ADDR 0x1 #define QLCNIC_CMD_CONFIG_INTRPT 0x2 #define QLCNIC_CMD_CREATE_RX_CTX 0x7 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index de79cde..4b41f9b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -5,11 +5,8 @@ * See LICENSE.qlcnic for copyright and licensing details. */ -#include -#include -#include -#include #include "qlcnic.h" +#include "qlcnic_hw.h" struct crb_addr_pair { u32 addr; @@ -327,7 +324,6 @@ static int qlcnic_wait_rom_done(struct qlcnic_adapter *adapter) long done = 0; cond_resched(); - while (done == 0) { done = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_STATUS); done &= 2; @@ -416,8 +412,8 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter) u32 off; struct pci_dev *pdev = adapter->pdev; - QLCWR32(adapter, CRB_CMDPEG_STATE, 0); - QLCWR32(adapter, CRB_RCVPEG_STATE, 0); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CMDPEG_STATE, 0); + QLC_SHARED_REG_WR32(adapter, QLCNIC_RCVPEG_STATE, 0); /* Halt all the indiviual PEGs and other blocks */ /* disable all I2Q */ @@ -564,8 +560,8 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter) QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0xc, 0); msleep(1); - QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0); - QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0); + QLC_SHARED_REG_WR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0); + QLC_SHARED_REG_WR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0); return 0; } @@ -576,7 +572,7 @@ static int qlcnic_cmd_peg_ready(struct qlcnic_adapter *adapter) int retries = QLCNIC_CMDPEG_CHECK_RETRY_COUNT; do { - val = QLCRD32(adapter, CRB_CMDPEG_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CMDPEG_STATE); switch (val) { case PHAN_INITIALIZE_COMPLETE: @@ -592,7 +588,8 @@ static int qlcnic_cmd_peg_ready(struct qlcnic_adapter *adapter) } while (--retries); - QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CMDPEG_STATE, + PHAN_INITIALIZE_FAILED); out_err: dev_err(&adapter->pdev->dev, "Command Peg initialization not " @@ -607,7 +604,7 @@ qlcnic_receive_peg_ready(struct qlcnic_adapter *adapter) int retries = QLCNIC_RCVPEG_CHECK_RETRY_COUNT; do { - val = QLCRD32(adapter, CRB_RCVPEG_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_RCVPEG_STATE); if (val == PHAN_PEG_RCV_INITIALIZED) return 0; @@ -638,7 +635,7 @@ qlcnic_check_fw_status(struct qlcnic_adapter *adapter) if (err) return err; - QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CMDPEG_STATE, PHAN_INITIALIZE_ACK); return err; } @@ -649,7 +646,7 @@ qlcnic_setup_idc_param(struct qlcnic_adapter *adapter) { int timeo; u32 val; - val = QLCRD32(adapter, QLCNIC_CRB_DEV_PARTITION_INFO); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_PARTITION_INFO); val = QLC_DEV_GET_DRV(val, adapter->portnum); if ((val & 0x3) != QLCNIC_TYPE_NIC) { dev_err(&adapter->pdev->dev, @@ -689,7 +686,7 @@ static int qlcnic_get_flt_entry(struct qlcnic_adapter *adapter, u8 region, } entry_size = flt_hdr.len - sizeof(struct qlcnic_flt_header); - flt_entry = (struct qlcnic_flt_entry *)vzalloc(entry_size); + flt_entry = vzalloc(entry_size); if (flt_entry == NULL) { dev_warn(&adapter->pdev->dev, "error allocating memory\n"); return -EIO; @@ -1096,11 +1093,13 @@ qlcnic_check_fw_hearbeat(struct qlcnic_adapter *adapter) u32 heartbeat, ret = -EIO; int retries = QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT; - adapter->heartbeat = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER); + adapter->heartbeat = QLC_SHARED_REG_RD32(adapter, + QLCNIC_PEG_ALIVE_COUNTER); do { msleep(QLCNIC_HEARTBEAT_PERIOD_MSECS); - heartbeat = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER); + heartbeat = QLC_SHARED_REG_RD32(adapter, + QLCNIC_PEG_ALIVE_COUNTER); if (heartbeat != adapter->heartbeat) { ret = QLCNIC_RCODE_SUCCESS; break; @@ -1270,7 +1269,7 @@ qlcnic_validate_firmware(struct qlcnic_adapter *adapter) return -EINVAL; } - QLCWR32(adapter, QLCNIC_CAM_RAM(0x1fc), QLCNIC_BDINFO_MAGIC); + QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, QLCNIC_BDINFO_MAGIC); return 0; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 70d325c..73b4f67 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -10,6 +10,7 @@ #include #include "qlcnic.h" +#include "qlcnic_hw.h" #include #include @@ -426,7 +427,6 @@ int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) qlcnic_enable_msi_legacy(adapter); return 0; } - static void qlcnic_teardown_intr(struct qlcnic_adapter *adapter) { @@ -562,12 +562,12 @@ qlcnic_set_function_modes(struct qlcnic_adapter *adapter) QLC_DEV_SET_DRV(0xf, id)); } } else { - data = QLCRD32(adapter, QLCNIC_DRV_OP_MODE); + data = QLC_SHARED_REG_RD32(adapter, QLCNIC_DRV_OP_MODE); data = (data & ~QLC_DEV_SET_DRV(0xf, ahw->pci_func)) | (QLC_DEV_SET_DRV(QLCNIC_MGMT_FUNC, ahw->pci_func)); } - QLCWR32(adapter, QLCNIC_DRV_OP_MODE, data); + QLC_SHARED_REG_WR32(adapter, QLCNIC_DRV_OP_MODE, data); qlcnic_api_unlock(adapter); err_lock: return ret; @@ -682,19 +682,26 @@ static void qlcnic_get_board_name(struct qlcnic_adapter *adapter, char *name) static void qlcnic_check_options(struct qlcnic_adapter *adapter) { + int err; u32 fw_major, fw_minor, fw_build, prev_fw_version; struct pci_dev *pdev = adapter->pdev; - struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump; + struct qlcnic_hardware_context *ahw = adapter->ahw; + struct qlcnic_fw_dump *fw_dump = &ahw->fw_dump; prev_fw_version = adapter->fw_version; - fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR); - fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR); - fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB); + fw_major = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MAJOR); + fw_minor = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MINOR); + fw_build = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_SUB); adapter->fw_version = QLCNIC_VERSION_CODE(fw_major, fw_minor, fw_build); - if (adapter->ahw->op_mode != QLCNIC_NON_PRIV_FUNC) { + err = qlcnic_get_board_info(adapter); + if (err) { + dev_err(&pdev->dev, "Error getting board config info.\n"); + return; + } + if (ahw->op_mode != QLCNIC_NON_PRIV_FUNC) { if (fw_dump->tmpl_hdr == NULL || adapter->fw_version > prev_fw_version) { if (fw_dump->tmpl_hdr) @@ -1010,10 +1017,12 @@ static int qlcnic_check_npar_opertional(struct qlcnic_adapter *adapter) if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC) return 0; - npar_state = QLCRD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE); + npar_state = QLC_SHARED_REG_RD32(adapter, + QLCNIC_CRB_DEV_NPAR_STATE); while (npar_state != QLCNIC_DEV_NPAR_OPER && --npar_opt_timeo) { msleep(1000); - npar_state = QLCRD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE); + npar_state = QLC_SHARED_REG_RD32(adapter, + QLCNIC_CRB_DEV_NPAR_STATE); } if (!npar_opt_timeo) { dev_err(&adapter->pdev->dev, @@ -1085,9 +1094,8 @@ check_fw_status: if (err) goto err_out; - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY); qlcnic_idc_debug_info(adapter, 1); - err = qlcnic_check_eswitch_mode(adapter); if (err) { dev_err(&adapter->pdev->dev, @@ -1105,7 +1113,7 @@ check_fw_status: return 0; err_out: - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_FAILED); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_FAILED); dev_err(&adapter->pdev->dev, "Device state set to failed\n"); qlcnic_release_firmware(adapter); @@ -1969,7 +1977,7 @@ static int qlcnic_check_temp(struct qlcnic_adapter *adapter) int rv = 0; if (qlcnic_82xx_check(adapter)) - temp = QLCRD32(adapter, CRB_TEMP_STATE); + temp = QLC_SHARED_REG_RD32(adapter, QLCNIC_ASIC_TEMP); temp_state = qlcnic_get_temp_state(temp); temp_val = qlcnic_get_temp_val(temp); @@ -2131,7 +2139,7 @@ qlcnic_idc_debug_info(struct qlcnic_adapter *adapter, u8 encoding) val |= encoding << 7; val |= (jiffies - adapter->dev_rst_time) << 8; - QLCWR32(adapter, QLCNIC_CRB_DRV_SCRATCH, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_SCRATCH, val); adapter->dev_rst_time = jiffies; } @@ -2146,14 +2154,14 @@ qlcnic_set_drv_state(struct qlcnic_adapter *adapter, u8 state) if (qlcnic_api_lock(adapter)) return -EIO; - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); if (state == QLCNIC_DEV_NEED_RESET) QLC_DEV_SET_RST_RDY(val, adapter->portnum); else if (state == QLCNIC_DEV_NEED_QUISCENT) QLC_DEV_SET_QSCNT_RDY(val, adapter->portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_STATE, val); qlcnic_api_unlock(adapter); @@ -2168,9 +2176,9 @@ qlcnic_clr_drv_state(struct qlcnic_adapter *adapter) if (qlcnic_api_lock(adapter)) return -EBUSY; - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); QLC_DEV_CLR_RST_QSCNT(val, adapter->portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_STATE, val); qlcnic_api_unlock(adapter); @@ -2185,20 +2193,22 @@ qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter, u8 failed) if (qlcnic_api_lock(adapter)) goto err; - val = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_ACTIVE); QLC_DEV_CLR_REF_CNT(val, adapter->portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_ACTIVE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_ACTIVE, val); if (failed) { - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_FAILED); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, + QLCNIC_DEV_FAILED); dev_info(&adapter->pdev->dev, "Device state set to Failed. Please Reboot\n"); } else if (!(val & 0x11111111)) - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_COLD); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, + QLCNIC_DEV_COLD); - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); QLC_DEV_CLR_RST_QSCNT(val, adapter->portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_STATE, val); qlcnic_api_unlock(adapter); err: @@ -2213,12 +2223,13 @@ static int qlcnic_check_drv_state(struct qlcnic_adapter *adapter) { int act, state, active_mask; + struct qlcnic_hardware_context *ahw = adapter->ahw; - state = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); - act = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE); + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); + act = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_ACTIVE); if (adapter->flags & QLCNIC_FW_RESET_OWNER) { - active_mask = (~(1 << (adapter->ahw->pci_func * 4))); + active_mask = (~(1 << (ahw->pci_func * 4))); act = act & active_mask; } @@ -2231,7 +2242,7 @@ qlcnic_check_drv_state(struct qlcnic_adapter *adapter) static int qlcnic_check_idc_ver(struct qlcnic_adapter *adapter) { - u32 val = QLCRD32(adapter, QLCNIC_CRB_DRV_IDC_VER); + u32 val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_IDC_VER); if (val != QLCNIC_DRV_IDC_VER) { dev_warn(&adapter->pdev->dev, "IDC Version mismatch, driver's" @@ -2255,19 +2266,21 @@ qlcnic_can_start_firmware(struct qlcnic_adapter *adapter) if (qlcnic_api_lock(adapter)) return -1; - val = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_ACTIVE); if (!(val & (1 << (portnum * 4)))) { QLC_DEV_SET_REF_CNT(val, portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_ACTIVE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_ACTIVE, val); } - prev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + prev_state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); QLCDB(adapter, HW, "Device state = %u\n", prev_state); switch (prev_state) { case QLCNIC_DEV_COLD: - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_INITIALIZING); - QLCWR32(adapter, QLCNIC_CRB_DRV_IDC_VER, QLCNIC_DRV_IDC_VER); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, + QLCNIC_DEV_INITIALIZING); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_IDC_VER, + QLCNIC_DRV_IDC_VER); qlcnic_idc_debug_info(adapter, 0); qlcnic_api_unlock(adapter); return 1; @@ -2278,15 +2291,15 @@ qlcnic_can_start_firmware(struct qlcnic_adapter *adapter) return ret; case QLCNIC_DEV_NEED_RESET: - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); QLC_DEV_SET_RST_RDY(val, portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_STATE, val); break; case QLCNIC_DEV_NEED_QUISCENT: - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); QLC_DEV_SET_QSCNT_RDY(val, portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_STATE, val); break; case QLCNIC_DEV_FAILED: @@ -2303,7 +2316,7 @@ qlcnic_can_start_firmware(struct qlcnic_adapter *adapter) do { msleep(1000); - prev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + prev_state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); if (prev_state == QLCNIC_DEV_QUISCENT) continue; @@ -2318,9 +2331,9 @@ qlcnic_can_start_firmware(struct qlcnic_adapter *adapter) if (qlcnic_api_lock(adapter)) return -1; - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DRV_STATE); QLC_DEV_CLR_RST_QSCNT(val, portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DRV_STATE, val); ret = qlcnic_check_idc_ver(adapter); qlcnic_api_unlock(adapter); @@ -2339,7 +2352,7 @@ qlcnic_fwinit_work(struct work_struct *work) if (qlcnic_api_lock(adapter)) goto err_ret; - dev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + dev_state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); if (dev_state == QLCNIC_DEV_QUISCENT || dev_state == QLCNIC_DEV_NEED_QUISCENT) { qlcnic_api_unlock(adapter); @@ -2368,17 +2381,19 @@ qlcnic_fwinit_work(struct work_struct *work) if (!qlcnic_check_drv_state(adapter)) { skip_ack_check: - dev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + dev_state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); if (dev_state == QLCNIC_DEV_NEED_RESET) { - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, - QLCNIC_DEV_INITIALIZING); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, + QLCNIC_DEV_INITIALIZING); set_bit(__QLCNIC_START_FW, &adapter->state); QLCDB(adapter, DRV, "Restarting fw\n"); qlcnic_idc_debug_info(adapter, 0); - val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE); + val = QLC_SHARED_REG_RD32(adapter, + QLCNIC_CRB_DRV_STATE); QLC_DEV_SET_RST_RDY(val, adapter->portnum); - QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val); + QLC_SHARED_REG_WR32(adapter, + QLCNIC_CRB_DRV_STATE, val); } qlcnic_api_unlock(adapter); @@ -2404,7 +2419,7 @@ skip_ack_check: qlcnic_api_unlock(adapter); wait_npar: - dev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + dev_state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); QLCDB(adapter, HW, "Func waiting: Device state=%u\n", dev_state); switch (dev_state) { @@ -2446,7 +2461,7 @@ qlcnic_detach_work(struct work_struct *work) } else qlcnic_down(adapter, netdev); - status = QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1); + status = QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS1); if (status & QLCNIC_RCODE_FATAL_ERROR) { dev_err(&adapter->pdev->dev, @@ -2497,13 +2512,14 @@ qlcnic_set_npar_non_operational(struct qlcnic_adapter *adapter) { u32 state; - state = QLCRD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE); + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE); if (state == QLCNIC_DEV_NPAR_NON_OPER) return; if (qlcnic_api_lock(adapter)) return; - QLCWR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE, QLCNIC_DEV_NPAR_NON_OPER); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE, + QLCNIC_DEV_NPAR_NON_OPER); qlcnic_api_unlock(adapter); } @@ -2551,7 +2567,8 @@ qlcnic_dev_set_npar_ready(struct qlcnic_adapter *adapter) if (qlcnic_api_lock(adapter)) return; - QLCWR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE, QLCNIC_DEV_NPAR_OPER); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE, + QLCNIC_DEV_NPAR_OPER); QLCDB(adapter, DRV, "NPAR operational state set\n"); qlcnic_api_unlock(adapter); @@ -2590,7 +2607,8 @@ qlcnic_attach_work(struct work_struct *work) u32 npar_state; if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) { - npar_state = QLCRD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE); + npar_state = QLC_SHARED_REG_RD32(adapter, + QLCNIC_CRB_DEV_NPAR_STATE); if (adapter->fw_wait_cnt++ > QLCNIC_DEV_NPAR_OPER_TIMEO) qlcnic_clr_all_drv_state(adapter, 0); else if (npar_state != QLCNIC_DEV_NPAR_OPER) @@ -2632,14 +2650,14 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) if (adapter->need_fw_reset) qlcnic_dev_request_reset(adapter, 0); - state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); if (state == QLCNIC_DEV_NEED_RESET) { qlcnic_set_npar_non_operational(adapter); adapter->need_fw_reset = 1; } else if (state == QLCNIC_DEV_NEED_QUISCENT) goto detach; - heartbeat = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER); + heartbeat = QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_ALIVE_COUNTER); if (heartbeat != adapter->heartbeat) { adapter->heartbeat = heartbeat; adapter->fw_fail_cnt = 0; @@ -2665,19 +2683,19 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state); dev_err(&adapter->pdev->dev, "firmware hang detected\n"); + peg_status = QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS1); dev_err(&adapter->pdev->dev, "Dumping hw/fw registers\n" "PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n" "PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n" "PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n" "PEG_NET_4_PC: 0x%x\n", - QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1), - QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS2), + peg_status, + QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS2), QLCRD32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x3c), QLCRD32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x3c), QLCRD32(adapter, QLCNIC_CRB_PEG_NET_2 + 0x3c), QLCRD32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x3c), QLCRD32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c)); - peg_status = QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1); if (QLCNIC_FWERROR_CODE(peg_status) == 0x67) dev_err(&adapter->pdev->dev, "Firmware aborted with error code 0x00006700. " @@ -2761,7 +2779,8 @@ static int qlcnic_attach_func(struct pci_dev *pdev) if (adapter->ahw->op_mode != QLCNIC_NON_PRIV_FUNC && first_func) { adapter->need_fw_reset = 1; set_bit(__QLCNIC_START_FW, &adapter->state); - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_INITIALIZING); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, + QLCNIC_DEV_INITIALIZING); QLCDB(adapter, DRV, "Restarting fw\n"); } qlcnic_api_unlock(adapter); @@ -2832,12 +2851,13 @@ static pci_ers_result_t qlcnic_io_slot_reset(struct pci_dev *pdev) static void qlcnic_io_resume(struct pci_dev *pdev) { + u32 state; struct qlcnic_adapter *adapter = pci_get_drvdata(pdev); pci_cleanup_aer_uncorrect_error_status(pdev); - - if (QLCRD32(adapter, QLCNIC_CRB_DEV_STATE) == QLCNIC_DEV_READY && - test_and_clear_bit(__QLCNIC_AER, &adapter->state)) + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_READY && test_and_clear_bit(__QLCNIC_AER, + &adapter->state)) qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY); } -- cgit v0.10.2 From 7f9664525f9cb507de9198a395a111371413f230 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:19 +0000 Subject: qlcnic: 83xx memory map and HW access routines 83xx adapter register map. 83xx hardware interface routines. Signed-off-by: Sucheta Chakraborty Signed-off-by: Anirban Chakraborty Signed-off-by: Sritej Velaga Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/Makefile b/drivers/net/ethernet/qlogic/qlcnic/Makefile index c4b8ced..f8d85ae 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/Makefile +++ b/drivers/net/ethernet/qlogic/qlcnic/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_QLCNIC) := qlcnic.o qlcnic-y := qlcnic_hw.o qlcnic_main.o qlcnic_init.o \ qlcnic_ethtool.o qlcnic_ctx.o qlcnic_io.o \ - qlcnic_sysfs.o qlcnic_minidump.o + qlcnic_sysfs.o qlcnic_minidump.o qlcnic_83xx_hw.o diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 5c5c578..2b7adda 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -33,6 +33,8 @@ #include #include "qlcnic_hdr.h" +#include "qlcnic_hw.h" +#include "qlcnic_83xx_hw.h" #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 @@ -96,7 +98,6 @@ #define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + MAX_TSO_HEADER_DESC \ + MGMT_CMD_DESC_RESV) #define QLCNIC_MAX_TX_TIMEOUTS 2 - /* * Following are the states of the Phantom. Phantom will set them and * Host will read to check if the fields are correct. @@ -399,10 +400,16 @@ struct qlcnic_hardware_context { u32 temp; u32 int_vec_bit; u32 fw_hal_version; + u32 port_config; struct qlcnic_hardware_ops *hw_ops; struct qlcnic_nic_intr_coalesce coal; struct qlcnic_fw_dump fw_dump; + struct qlcnic_intrpt_config *intr_tbl; u32 *reg_tbl; + u32 *ext_reg_tbl; + u32 mbox_aen[QLC_83XX_MBX_AEN_CNT]; + u32 mbox_reg[4]; + spinlock_t mbx_lock; }; struct qlcnic_adapter_stats { @@ -423,6 +430,7 @@ struct qlcnic_adapter_stats { u64 null_rxbuf; u64 rx_dma_map_error; u64 tx_dma_map_error; + u64 spurious_intr; }; /* @@ -461,6 +469,8 @@ struct qlcnic_host_sds_ring { } ____cacheline_internodealigned_in_smp; struct qlcnic_host_tx_ring { + void __iomem *crb_intr_mask; + char name[IFNAMSIZ+4]; u16 ctx_id; u32 producer; u32 sw_consumer; @@ -761,7 +771,7 @@ struct qlcnic_mac_list_s { */ #define QLCNIC_C2H_OPCODE_CONFIG_LOOPBACK 0x8f -#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE 141 +#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE 0x8D #define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */ #define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */ @@ -854,7 +864,7 @@ struct qlcnic_ipaddr { #define QLCNIC_MSI_ENABLED 0x02 #define QLCNIC_MSIX_ENABLED 0x04 -#define QLCNIC_LRO_ENABLED 0x08 +#define QLCNIC_LRO_ENABLED 0x01 #define QLCNIC_LRO_DISABLED 0x00 #define QLCNIC_BRIDGE_ENABLED 0X10 #define QLCNIC_DIAG_ENABLED 0x20 @@ -894,6 +904,7 @@ struct qlcnic_ipaddr { #define QLCNIC_FILTER_AGE 80 #define QLCNIC_READD_AGE 20 #define QLCNIC_LB_MAX_FILTERS 64 +#define QLCNIC_LB_BUCKET_SIZE 32 /* QLCNIC Driver Error Code */ #define QLCNIC_FW_NOT_RESPOND 51 @@ -911,7 +922,8 @@ struct qlcnic_filter { struct qlcnic_filter_hash { struct hlist_head *fhead; u8 fnum; - u8 fmax; + u16 fmax; + u16 fbucket_size; }; struct qlcnic_adapter { @@ -933,6 +945,7 @@ struct qlcnic_adapter { u8 max_rds_rings; u8 max_sds_rings; + u8 rx_csum; u8 portnum; u8 fw_wait_cnt; @@ -968,7 +981,9 @@ struct qlcnic_adapter { void __iomem *isr_int_vec; struct msix_entry *msix_entries; + struct workqueue_struct *qlcnic_wq; struct delayed_work fw_work; + struct delayed_work idc_aen_work; struct qlcnic_filter_hash fhash; @@ -994,7 +1009,24 @@ struct qlcnic_info_le { __le16 max_rx_ques; __le16 min_tx_bw; __le16 max_tx_bw; - u8 reserved2[104]; + __le32 op_type; + __le16 max_bw_reg_offset; + __le16 max_linkspeed_reg_offset; + __le32 capability1; + __le32 capability2; + __le32 capability3; + __le16 max_tx_mac_filters; + __le16 max_rx_mcast_mac_filters; + __le16 max_rx_ucast_mac_filters; + __le16 max_rx_ip_addr; + __le16 max_rx_lro_flow; + __le16 max_rx_status_rings; + __le16 max_rx_buf_rings; + __le16 max_tx_vlan_keys; + u8 total_pf; + u8 total_rss_engines; + __le16 max_vports; + u8 reserved2[64]; } __packed; struct qlcnic_info { @@ -1010,6 +1042,23 @@ struct qlcnic_info { u16 max_rx_ques; u16 min_tx_bw; u16 max_tx_bw; + u32 op_type; + u16 max_bw_reg_offset; + u16 max_linkspeed_reg_offset; + u32 capability1; + u32 capability2; + u32 capability3; + u16 max_tx_mac_filters; + u16 max_rx_mcast_mac_filters; + u16 max_rx_ucast_mac_filters; + u16 max_rx_ip_addr; + u16 max_rx_lro_flow; + u16 max_rx_status_rings; + u16 max_rx_buf_rings; + u16 max_tx_vlan_keys; + u8 total_pf; + u8 total_rss_engines; + u16 max_vports; }; struct qlcnic_pci_info_le { @@ -1023,7 +1072,9 @@ struct qlcnic_pci_info_le { __le16 reserved1[2]; u8 mac[ETH_ALEN]; - u8 reserved2[106]; + __le16 func_count; + u8 reserved2[104]; + } __packed; struct qlcnic_pci_info { @@ -1034,6 +1085,7 @@ struct qlcnic_pci_info { u16 tx_min_bw; u16 tx_max_bw; u8 mac[ETH_ALEN]; + u16 func_count; }; struct qlcnic_npar_info { @@ -1375,6 +1427,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev); int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data); int qlcnic_validate_max_rss(struct net_device *netdev, u8, u8); void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter); +int qlcnic_enable_msix(struct qlcnic_adapter *, u32); /* eSwitch management functions */ int qlcnic_config_switch_port(struct qlcnic_adapter *, @@ -1394,6 +1447,7 @@ void qlcnic_napi_del(struct qlcnic_adapter *); int qlcnic_alloc_sds_rings(struct qlcnic_recv_context *, int); void qlcnic_free_sds_rings(struct qlcnic_recv_context *); +void qlcnic_advert_link_change(struct qlcnic_adapter *, int); void qlcnic_free_tx_rings(struct qlcnic_adapter *); int qlcnic_alloc_tx_rings(struct qlcnic_adapter *, struct net_device *); @@ -1502,7 +1556,7 @@ static inline void qlcnic_write_crb(struct qlcnic_adapter *adapter, char *buf, adapter->ahw->hw_ops->write_crb(adapter, buf, offset, size); } -static inline u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, +static inline int qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off) { return adapter->ahw->hw_ops->read_reg(adapter, off); @@ -1723,6 +1777,7 @@ extern const struct ethtool_ops qlcnic_ethtool_failed_ops; __func__, ##_args); \ } while (0) +#define PCI_DEVICE_ID_QLOGIC_QLE834X 0x8030 #define PCI_DEVICE_ID_QLOGIC_QLE824X 0x8020 static inline bool qlcnic_82xx_check(struct qlcnic_adapter *adapter) { @@ -1730,4 +1785,11 @@ static inline bool qlcnic_82xx_check(struct qlcnic_adapter *adapter) return (device == PCI_DEVICE_ID_QLOGIC_QLE824X) ? true : false; } +static inline bool qlcnic_83xx_check(struct qlcnic_adapter *adapter) +{ + unsigned short device = adapter->pdev->device; + return (device == PCI_DEVICE_ID_QLOGIC_QLE834X) ? true : false; +} + + #endif /* __QLCNIC_H_ */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c new file mode 100644 index 0000000..454cd9f --- /dev/null +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -0,0 +1,1719 @@ +#include "qlcnic.h" +#include +#include +#include +#include + +#define QLCNIC_MAX_TX_QUEUES 1 + +#define QLCNIC_MBX_RSP(reg) LSW(reg) +#define QLCNIC_MBX_NUM_REGS(reg) (MSW(reg) & 0x1FF) +#define QLCNIC_MBX_STATUS(reg) (((reg) >> 25) & 0x7F) +#define QLCNIC_MBX_HOST(ahw, i) ((ahw)->pci_base0 + ((i) * 4)) +#define QLCNIC_MBX_FW(ahw, i) ((ahw)->pci_base0 + 0x800 + ((i) * 4)) + +#define RSS_HASHTYPE_IP_TCP 0x3 + +/* status descriptor mailbox data + * @phy_addr: physical address of buffer + * @sds_ring_size: buffer size + * @intrpt_id: interrupt id + * @intrpt_val: source of interrupt + */ +struct qlcnic_sds_mbx { + u64 phy_addr; + u8 rsvd1[16]; + u16 sds_ring_size; + u16 rsvd2[3]; + u16 intrpt_id; + u8 intrpt_val; + u8 rsvd3[5]; +} __packed; + +/* receive descriptor buffer data + * phy_addr_reg: physical address of regular buffer + * phy_addr_jmb: physical address of jumbo buffer + * reg_ring_sz: size of regular buffer + * reg_ring_len: no. of entries in regular buffer + * jmb_ring_len: no. of entries in jumbo buffer + * jmb_ring_sz: size of jumbo buffer + */ +struct qlcnic_rds_mbx { + u64 phy_addr_reg; + u64 phy_addr_jmb; + u16 reg_ring_sz; + u16 reg_ring_len; + u16 jmb_ring_sz; + u16 jmb_ring_len; +} __packed; + +/* host producers for regular and jumbo rings */ +struct __host_producer_mbx { + u32 reg_buf; + u32 jmb_buf; +} __packed; + +/* Receive context mailbox data outbox registers + * @state: state of the context + * @vport_id: virtual port id + * @context_id: receive context id + * @num_pci_func: number of pci functions of the port + * @phy_port: physical port id + */ +struct qlcnic_rcv_mbx_out { + u8 rcv_num; + u8 sts_num; + u16 ctx_id; + u8 state; + u8 num_pci_func; + u8 phy_port; + u8 vport_id; + u32 host_csmr[QLCNIC_MAX_RING_SETS]; + struct __host_producer_mbx host_prod[QLCNIC_MAX_RING_SETS]; +} __packed; + +struct qlcnic_add_rings_mbx_out { + u8 rcv_num; + u8 sts_num; + u16 ctx_id; + u32 host_csmr[QLCNIC_MAX_RING_SETS]; + struct __host_producer_mbx host_prod[QLCNIC_MAX_RING_SETS]; +} __packed; + +/* Transmit context mailbox inbox registers + * @phys_addr: DMA address of the transmit buffer + * @cnsmr_index: host consumer index + * @size: legth of transmit buffer ring + * @intr_id: interrput id + * @src: src of interrupt + */ +struct qlcnic_tx_mbx { + u64 phys_addr; + u64 cnsmr_index; + u16 size; + u16 intr_id; + u8 src; + u8 rsvd[3]; +} __packed; + +/* Transmit context mailbox outbox registers + * @host_prod: host producer index + * @ctx_id: transmit context id + * @state: state of the transmit context + */ +struct qlcnic_tx_mbx_out { + u32 host_prod; + u16 ctx_id; + u8 state; + u8 rsvd; +} __packed; + +static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = { + {QLCNIC_CMD_CONFIGURE_IP_ADDR, 6, 1}, + {QLCNIC_CMD_CONFIG_INTRPT, 18, 34}, + {QLCNIC_CMD_CREATE_RX_CTX, 136, 27}, + {QLCNIC_CMD_DESTROY_RX_CTX, 2, 1}, + {QLCNIC_CMD_CREATE_TX_CTX, 54, 18}, + {QLCNIC_CMD_DESTROY_TX_CTX, 2, 1}, + {QLCNIC_CMD_CONFIGURE_MAC_LEARNING, 2, 1}, + {QLCNIC_CMD_INTRPT_TEST, 22, 12}, + {QLCNIC_CMD_SET_MTU, 3, 1}, + {QLCNIC_CMD_READ_PHY, 4, 2}, + {QLCNIC_CMD_WRITE_PHY, 5, 1}, + {QLCNIC_CMD_READ_HW_REG, 4, 1}, + {QLCNIC_CMD_GET_FLOW_CTL, 4, 2}, + {QLCNIC_CMD_SET_FLOW_CTL, 4, 1}, + {QLCNIC_CMD_READ_MAX_MTU, 4, 2}, + {QLCNIC_CMD_READ_MAX_LRO, 4, 2}, + {QLCNIC_CMD_MAC_ADDRESS, 4, 3}, + {QLCNIC_CMD_GET_PCI_INFO, 1, 66}, + {QLCNIC_CMD_GET_NIC_INFO, 2, 19}, + {QLCNIC_CMD_SET_NIC_INFO, 32, 1}, + {QLCNIC_CMD_GET_ESWITCH_CAPABILITY, 4, 3}, + {QLCNIC_CMD_TOGGLE_ESWITCH, 4, 1}, + {QLCNIC_CMD_GET_ESWITCH_STATUS, 4, 3}, + {QLCNIC_CMD_SET_PORTMIRRORING, 4, 1}, + {QLCNIC_CMD_CONFIGURE_ESWITCH, 4, 1}, + {QLCNIC_CMD_GET_ESWITCH_PORT_CONFIG, 4, 3}, + {QLCNIC_CMD_GET_ESWITCH_STATS, 5, 1}, + {QLCNIC_CMD_CONFIG_PORT, 4, 1}, + {QLCNIC_CMD_TEMP_SIZE, 1, 4}, + {QLCNIC_CMD_GET_TEMP_HDR, 5, 5}, + {QLCNIC_CMD_GET_LINK_EVENT, 2, 1}, + {QLCNIC_CMD_CONFIG_MAC_VLAN, 4, 3}, + {QLCNIC_CMD_CONFIG_INTR_COAL, 6, 1}, + {QLCNIC_CMD_CONFIGURE_RSS, 14, 1}, + {QLCNIC_CMD_CONFIGURE_LED, 2, 1}, + {QLCNIC_CMD_CONFIGURE_MAC_RX_MODE, 2, 1}, + {QLCNIC_CMD_CONFIGURE_HW_LRO, 2, 1}, + {QLCNIC_CMD_GET_STATISTICS, 2, 80}, + {QLCNIC_CMD_SET_PORT_CONFIG, 2, 1}, + {QLCNIC_CMD_GET_PORT_CONFIG, 2, 2}, + {QLCNIC_CMD_GET_LINK_STATUS, 2, 4}, + {QLCNIC_CMD_IDC_ACK, 5, 1}, + {QLCNIC_CMD_INIT_NIC_FUNC, 2, 1}, + {QLCNIC_CMD_STOP_NIC_FUNC, 2, 1}, + {QLCNIC_CMD_SET_LED_CONFIG, 5, 1}, + {QLCNIC_CMD_GET_LED_CONFIG, 1, 5}, + {QLCNIC_CMD_ADD_RCV_RINGS, 130, 26}, +}; + +static const u32 qlcnic_83xx_ext_reg_tbl[] = { + 0x38CC, /* Global Reset */ + 0x38F0, /* Wildcard */ + 0x38FC, /* Informant */ + 0x3038, /* Host MBX ctrl */ + 0x303C, /* FW MBX ctrl */ + 0x355C, /* BOOT LOADER ADDRESS REG */ + 0x3560, /* BOOT LOADER SIZE REG */ + 0x3564, /* FW IMAGE ADDR REG */ + 0x1000, /* MBX intr enable */ + 0x1200, /* Default Intr mask */ + 0x1204, /* Default Interrupt ID */ + 0x3780, /* QLC_83XX_IDC_MAJ_VERSION */ + 0x3784, /* QLC_83XX_IDC_DEV_STATE */ + 0x3788, /* QLC_83XX_IDC_DRV_PRESENCE */ + 0x378C, /* QLC_83XX_IDC_DRV_ACK */ + 0x3790, /* QLC_83XX_IDC_CTRL */ + 0x3794, /* QLC_83XX_IDC_DRV_AUDIT */ + 0x3798, /* QLC_83XX_IDC_MIN_VERSION */ + 0x379C, /* QLC_83XX_RECOVER_DRV_LOCK */ + 0x37A0, /* QLC_83XX_IDC_PF_0 */ + 0x37A4, /* QLC_83XX_IDC_PF_1 */ + 0x37A8, /* QLC_83XX_IDC_PF_2 */ + 0x37AC, /* QLC_83XX_IDC_PF_3 */ + 0x37B0, /* QLC_83XX_IDC_PF_4 */ + 0x37B4, /* QLC_83XX_IDC_PF_5 */ + 0x37B8, /* QLC_83XX_IDC_PF_6 */ + 0x37BC, /* QLC_83XX_IDC_PF_7 */ + 0x37C0, /* QLC_83XX_IDC_PF_8 */ + 0x37C4, /* QLC_83XX_IDC_PF_9 */ + 0x37C8, /* QLC_83XX_IDC_PF_10 */ + 0x37CC, /* QLC_83XX_IDC_PF_11 */ + 0x37D0, /* QLC_83XX_IDC_PF_12 */ + 0x37D4, /* QLC_83XX_IDC_PF_13 */ + 0x37D8, /* QLC_83XX_IDC_PF_14 */ + 0x37DC, /* QLC_83XX_IDC_PF_15 */ + 0x37E0, /* QLC_83XX_IDC_DEV_PARTITION_INFO_1 */ + 0x37E4, /* QLC_83XX_IDC_DEV_PARTITION_INFO_2 */ + 0x37F0, /* QLC_83XX_DRV_OP_MODE */ + 0x37F4, /* QLC_83XX_VNIC_STATE */ + 0x3868, /* QLC_83XX_DRV_LOCK */ + 0x386C, /* QLC_83XX_DRV_UNLOCK */ + 0x3504, /* QLC_83XX_DRV_LOCK_ID */ + 0x34A4, /* QLC_83XX_ASIC_TEMP */ +}; + +static const u32 qlcnic_83xx_reg_tbl[] = { + 0x34A8, /* PEG_HALT_STAT1 */ + 0x34AC, /* PEG_HALT_STAT2 */ + 0x34B0, /* FW_HEARTBEAT */ + 0x3500, /* FLASH LOCK_ID */ + 0x3528, /* FW_CAPABILITIES */ + 0x3538, /* Driver active, DRV_REG0 */ + 0x3540, /* Device state, DRV_REG1 */ + 0x3544, /* Driver state, DRV_REG2 */ + 0x3548, /* Driver scratch, DRV_REG3 */ + 0x354C, /* Device partiton info, DRV_REG4 */ + 0x3524, /* Driver IDC ver, DRV_REG5 */ + 0x3550, /* FW_VER_MAJOR */ + 0x3554, /* FW_VER_MINOR */ + 0x3558, /* FW_VER_SUB */ + 0x359C, /* NPAR STATE */ + 0x35FC, /* FW_IMG_VALID */ + 0x3650, /* CMD_PEG_STATE */ + 0x373C, /* RCV_PEG_STATE */ + 0x37B4, /* ASIC TEMP */ + 0x356C, /* FW API */ + 0x3570, /* DRV OP MODE */ + 0x3850, /* FLASH LOCK */ + 0x3854, /* FLASH UNLOCK */ +}; + +static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { + .read_crb = qlcnic_83xx_read_crb, + .write_crb = qlcnic_83xx_write_crb, + .read_reg = qlcnic_83xx_rd_reg_indirect, + .write_reg = qlcnic_83xx_wrt_reg_indirect, + .get_mac_address = qlcnic_83xx_get_mac_address, + .setup_intr = qlcnic_83xx_setup_intr, + .alloc_mbx_args = qlcnic_83xx_alloc_mbx_args, + .mbx_cmd = qlcnic_83xx_mbx_op, + .get_func_no = qlcnic_83xx_get_func_no, + .api_lock = qlcnic_83xx_cam_lock, + .api_unlock = qlcnic_83xx_cam_unlock, + .create_rx_ctx = qlcnic_83xx_create_rx_ctx, + .create_tx_ctx = qlcnic_83xx_create_tx_ctx, + .setup_link_event = qlcnic_83xx_setup_link_event, + .get_nic_info = qlcnic_83xx_get_nic_info, + .get_pci_info = qlcnic_83xx_get_pci_info, + .set_nic_info = qlcnic_83xx_set_nic_info, + .change_macvlan = qlcnic_83xx_sre_macaddr_change, + .config_intr_coal = qlcnic_83xx_config_intr_coal, + .config_rss = qlcnic_83xx_config_rss, + .config_hw_lro = qlcnic_83xx_config_hw_lro, + .config_loopback = qlcnic_83xx_set_lb_mode, + .clear_loopback = qlcnic_83xx_clear_lb_mode, + .config_promisc_mode = qlcnic_83xx_nic_set_promisc, + .change_l2_filter = qlcnic_83xx_change_l2_filter, + .get_board_info = qlcnic_83xx_get_port_info, +}; + +static struct qlcnic_nic_template qlcnic_83xx_ops = { + .config_bridged_mode = qlcnic_config_bridged_mode, + .config_led = qlcnic_config_led, + .config_ipaddr = qlcnic_83xx_config_ipaddr, + .clear_legacy_intr = qlcnic_83xx_clear_legacy_intr, +}; + +void qlcnic_83xx_register_map(struct qlcnic_hardware_context *ahw) +{ + ahw->hw_ops = &qlcnic_83xx_hw_ops; + ahw->reg_tbl = (u32 *)qlcnic_83xx_reg_tbl; + ahw->ext_reg_tbl = (u32 *)qlcnic_83xx_ext_reg_tbl; +} + +int qlcnic_83xx_get_fw_version(struct qlcnic_adapter *adapter) +{ + u32 fw_major, fw_minor, fw_build; + struct pci_dev *pdev = adapter->pdev; + + fw_major = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MAJOR); + fw_minor = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MINOR); + fw_build = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_SUB); + adapter->fw_version = QLCNIC_VERSION_CODE(fw_major, fw_minor, fw_build); + + dev_info(&pdev->dev, "Driver v%s, firmware version %d.%d.%d\n", + QLCNIC_LINUX_VERSIONID, fw_major, fw_minor, fw_build); + + return adapter->fw_version; +} + +static int __qlcnic_set_win_base(struct qlcnic_adapter *adapter, u32 addr) +{ + void __iomem *base; + u32 val; + + base = adapter->ahw->pci_base0 + + QLC_83XX_CRB_WIN_FUNC(adapter->ahw->pci_func); + writel(addr, base); + val = readl(base); + if (val != addr) + return -EIO; + + return 0; +} + +int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *adapter, ulong addr) +{ + int ret; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + ret = __qlcnic_set_win_base(adapter, (u32) addr); + if (!ret) { + return QLCRDX(ahw, QLCNIC_WILDCARD); + } else { + dev_err(&adapter->pdev->dev, + "%s failed, addr = 0x%x\n", __func__, (int)addr); + return -EIO; + } +} + +int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *adapter, ulong addr, + u32 data) +{ + int err; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + err = __qlcnic_set_win_base(adapter, (u32) addr); + if (!err) { + QLCWRX(ahw, QLCNIC_WILDCARD, data); + return 0; + } else { + dev_err(&adapter->pdev->dev, + "%s failed, addr = 0x%x data = 0x%x\n", + __func__, (int)addr, data); + return err; + } +} + +int qlcnic_83xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) +{ + int err, i, num_msix; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (!num_intr) + num_intr = QLCNIC_DEF_NUM_STS_DESC_RINGS; + num_msix = rounddown_pow_of_two(min_t(int, num_online_cpus(), + num_intr)); + /* account for AEN interrupt MSI-X based interrupts */ + num_msix += 1; + num_msix += adapter->max_drv_tx_rings; + err = qlcnic_enable_msix(adapter, num_msix); + if (err == -ENOMEM) + return err; + if (adapter->flags & QLCNIC_MSIX_ENABLED) + num_msix = adapter->ahw->num_msix; + else + num_msix = 1; + /* setup interrupt mapping table for fw */ + ahw->intr_tbl = vzalloc(num_msix * + sizeof(struct qlcnic_intrpt_config)); + if (!ahw->intr_tbl) + return -ENOMEM; + if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { + /* MSI-X enablement failed, use legacy interrupt */ + adapter->tgt_status_reg = ahw->pci_base0 + QLC_83XX_INTX_PTR; + adapter->tgt_mask_reg = ahw->pci_base0 + QLC_83XX_INTX_MASK; + adapter->isr_int_vec = ahw->pci_base0 + QLC_83XX_INTX_TRGR; + adapter->msix_entries[0].vector = adapter->pdev->irq; + dev_info(&adapter->pdev->dev, "using legacy interrupt\n"); + } + + for (i = 0; i < num_msix; i++) { + if (adapter->flags & QLCNIC_MSIX_ENABLED) + ahw->intr_tbl[i].type = QLCNIC_INTRPT_MSIX; + else + ahw->intr_tbl[i].type = QLCNIC_INTRPT_INTX; + ahw->intr_tbl[i].id = i; + ahw->intr_tbl[i].src = 0; + } + return 0; +} + +inline void qlcnic_83xx_enable_intr(struct qlcnic_adapter *adapter, + struct qlcnic_host_sds_ring *sds_ring) +{ + writel(0, sds_ring->crb_intr_mask); + if (!QLCNIC_IS_MSI_FAMILY(adapter)) + writel(0, adapter->tgt_mask_reg); +} + +static inline void qlcnic_83xx_get_mbx_data(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) +{ + int i; + for (i = 0; i < cmd->rsp.num; i++) + cmd->rsp.arg[i] = readl(QLCNIC_MBX_FW(adapter->ahw, i)); +} + +irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *adapter) +{ + u32 intr_val; + struct qlcnic_hardware_context *ahw = adapter->ahw; + int retries = 0; + + intr_val = readl(adapter->tgt_status_reg); + + if (!QLC_83XX_VALID_INTX_BIT31(intr_val)) + return IRQ_NONE; + + if (QLC_83XX_INTX_FUNC(intr_val) != adapter->ahw->pci_func) { + adapter->stats.spurious_intr++; + return IRQ_NONE; + } + /* clear the interrupt trigger control register */ + writel(0, adapter->isr_int_vec); + do { + intr_val = readl(adapter->tgt_status_reg); + if (QLC_83XX_INTX_FUNC(intr_val) != ahw->pci_func) + break; + retries++; + } while (QLC_83XX_VALID_INTX_BIT30(intr_val) && + (retries < QLC_83XX_LEGACY_INTX_MAX_RETRY)); + + if (retries == QLC_83XX_LEGACY_INTX_MAX_RETRY) { + dev_info(&adapter->pdev->dev, + "Reached maximum retries to clear legacy interrupt\n"); + return IRQ_NONE; + } + + mdelay(QLC_83XX_LEGACY_INTX_DELAY); + + return IRQ_HANDLED; +} + +irqreturn_t qlcnic_83xx_tmp_intr(int irq, void *data) +{ + struct qlcnic_host_sds_ring *sds_ring = data; + struct qlcnic_adapter *adapter = sds_ring->adapter; + + if (adapter->flags & QLCNIC_MSIX_ENABLED) + goto done; + + if (adapter->nic_ops->clear_legacy_intr(adapter) == IRQ_NONE) + return IRQ_NONE; + +done: + adapter->ahw->diag_cnt++; + qlcnic_83xx_enable_intr(adapter, sds_ring); + + return IRQ_HANDLED; +} + +void qlcnic_83xx_free_mbx_intr(struct qlcnic_adapter *adapter) +{ + u32 val = 0; + u32 num_msix = adapter->ahw->num_msix - 1; + + val = (num_msix << 8); + + QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, val); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + free_irq(adapter->msix_entries[num_msix].vector, adapter); +} + +int qlcnic_83xx_setup_mbx_intr(struct qlcnic_adapter *adapter) +{ + irq_handler_t handler; + u32 val; + char name[32]; + int err = 0; + unsigned long flags = 0; + + if (!(adapter->flags & QLCNIC_MSI_ENABLED) && + !(adapter->flags & QLCNIC_MSIX_ENABLED)) + flags |= IRQF_SHARED; + + if (adapter->flags & QLCNIC_MSIX_ENABLED) { + handler = qlcnic_83xx_handle_aen; + val = adapter->msix_entries[adapter->ahw->num_msix - 1].vector; + snprintf(name, (IFNAMSIZ + 4), + "%s[%s]", adapter->netdev->name, "aen"); + err = request_irq(val, handler, flags, name, adapter); + if (err) { + dev_err(&adapter->pdev->dev, + "failed to register MBX interrupt\n"); + return err; + } + } + + /* Enable mailbox interrupt */ + qlcnic_83xx_enable_mbx_intrpt(adapter); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + err = qlcnic_83xx_config_intrpt(adapter, 1); + + return err; +} + +void qlcnic_83xx_get_func_no(struct qlcnic_adapter *adapter) +{ + u32 val = QLCRDX(adapter->ahw, QLCNIC_INFORMANT); + adapter->ahw->pci_func = val & 0xf; +} + +int qlcnic_83xx_cam_lock(struct qlcnic_adapter *adapter) +{ + void __iomem *addr; + u32 val, limit = 0; + + struct qlcnic_hardware_context *ahw = adapter->ahw; + + addr = ahw->pci_base0 + QLC_83XX_SEM_LOCK_FUNC(ahw->pci_func); + do { + val = readl(addr); + if (val) { + /* write the function number to register */ + QLC_SHARED_REG_WR32(adapter, QLCNIC_FLASH_LOCK_OWNER, + ahw->pci_func); + return 0; + } + usleep_range(1000, 2000); + } while (++limit <= QLCNIC_PCIE_SEM_TIMEOUT); + + return -EIO; +} + +void qlcnic_83xx_cam_unlock(struct qlcnic_adapter *adapter) +{ + void __iomem *addr; + u32 val; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + addr = ahw->pci_base0 + QLC_83XX_SEM_UNLOCK_FUNC(ahw->pci_func); + val = readl(addr); +} + +void qlcnic_83xx_read_crb(struct qlcnic_adapter *adapter, char *buf, + loff_t offset, size_t size) +{ + int ret; + u32 data; + + if (qlcnic_api_lock(adapter)) { + dev_err(&adapter->pdev->dev, + "%s: failed to acquire lock. addr offset 0x%x\n", + __func__, (u32)offset); + return; + } + + ret = qlcnic_83xx_rd_reg_indirect(adapter, (u32) offset); + qlcnic_api_unlock(adapter); + + if (ret == -EIO) { + dev_err(&adapter->pdev->dev, + "%s: failed. addr offset 0x%x\n", + __func__, (u32)offset); + return; + } + data = ret; + memcpy(buf, &data, size); +} + +void qlcnic_83xx_write_crb(struct qlcnic_adapter *adapter, char *buf, + loff_t offset, size_t size) +{ + u32 data; + + memcpy(&data, buf, size); + qlcnic_83xx_wrt_reg_indirect(adapter, (u32) offset, data); +} + +int qlcnic_83xx_get_port_info(struct qlcnic_adapter *adapter) +{ + int status; + + status = qlcnic_83xx_get_port_config(adapter); + if (status) { + dev_err(&adapter->pdev->dev, + "Get Port Info failed\n"); + } else { + if (QLC_83XX_SFP_10G_CAPABLE(adapter->ahw->port_config)) + adapter->ahw->port_type = QLCNIC_XGBE; + else + adapter->ahw->port_type = QLCNIC_GBE; + if (QLC_83XX_AUTONEG(adapter->ahw->port_config)) + adapter->ahw->link_autoneg = AUTONEG_ENABLE; + } + return status; +} + +void qlcnic_83xx_enable_mbx_intrpt(struct qlcnic_adapter *adapter) +{ + u32 val; + + if (adapter->flags & QLCNIC_MSIX_ENABLED) + val = BIT_2 | ((adapter->ahw->num_msix - 1) << 8); + else + val = BIT_2; + QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, val); +} + +void qlcnic_83xx_check_vf(struct qlcnic_adapter *adapter, + const struct pci_device_id *ent) +{ + u32 op_mode, priv_level; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + /* Determine FW API version */ + ahw->fw_hal_version = 2; + /* Find PCI function number */ + qlcnic_get_func_no(adapter); + + /* Determine function privilege level */ + op_mode = QLCRDX(adapter->ahw, QLC_83XX_DRV_OP_MODE); + if (op_mode == QLC_83XX_DEFAULT_OPMODE) + priv_level = QLCNIC_MGMT_FUNC; + else + priv_level = QLC_83XX_GET_FUNC_PRIVILEGE(op_mode, + ahw->pci_func); + + if (priv_level == QLCNIC_NON_PRIV_FUNC) { + ahw->op_mode = QLCNIC_NON_PRIV_FUNC; + dev_info(&adapter->pdev->dev, + "HAL Version: %d Non Privileged function\n", + ahw->fw_hal_version); + adapter->nic_ops = &qlcnic_vf_ops; + } else { + adapter->nic_ops = &qlcnic_83xx_ops; + } +} + +static void qlcnic_83xx_handle_link_aen(struct qlcnic_adapter *adapter, + u32 data[]); +static void qlcnic_83xx_handle_idc_comp_aen(struct qlcnic_adapter *adapter, + u32 data[]); + +static void qlcnic_dump_mbx(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) +{ + int i; + + dev_info(&adapter->pdev->dev, + "Host MBX regs(%d)\n", cmd->req.num); + for (i = 0; i < cmd->req.num; i++) { + if (i && !(i % 8)) + pr_info("\n"); + pr_info("%08x ", cmd->req.arg[i]); + } + pr_info("\n"); + dev_info(&adapter->pdev->dev, + "FW MBX regs(%d)\n", cmd->rsp.num); + for (i = 0; i < cmd->rsp.num; i++) { + if (i && !(i % 8)) + pr_info("\n"); + pr_info("%08x ", cmd->rsp.arg[i]); + } + pr_info("\n"); +} + +static u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter) +{ + u32 data; + unsigned long wait_time = 0; + struct qlcnic_hardware_context *ahw = adapter->ahw; + /* wait for mailbox completion */ + do { + data = QLCRDX(ahw, QLCNIC_FW_MBX_CTRL); + if (++wait_time > QLCNIC_MBX_TIMEOUT) { + data = QLCNIC_RCODE_TIMEOUT; + break; + } + mdelay(1); + } while (!data); + return data; +} + +int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) +{ + int i; + u16 opcode; + u8 mbx_err_code, mac_cmd_rcode; + u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, temp, fw[8]; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + opcode = LSW(cmd->req.arg[0]); + spin_lock(&ahw->mbx_lock); + mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); + + if (mbx_val) { + QLCDB(adapter, DRV, + "Mailbox cmd attempted, 0x%x\n", opcode); + QLCDB(adapter, DRV, + "Mailbox not available, 0x%x, collect FW dump\n", + mbx_val); + cmd->rsp.arg[0] = QLCNIC_RCODE_TIMEOUT; + spin_unlock(&ahw->mbx_lock); + return cmd->rsp.arg[0]; + } + + /* Fill in mailbox registers */ + mbx_cmd = cmd->req.arg[0]; + writel(mbx_cmd, QLCNIC_MBX_HOST(ahw, 0)); + for (i = 1; i < cmd->req.num; i++) + writel(cmd->req.arg[i], QLCNIC_MBX_HOST(ahw, i)); + + /* Signal FW about the impending command */ + QLCWRX(ahw, QLCNIC_HOST_MBX_CTRL, QLCNIC_SET_OWNER); +poll: + rsp = qlcnic_83xx_mbx_poll(adapter); + /* Get the FW response data */ + fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); + mbx_err_code = QLCNIC_MBX_STATUS(fw_data); + rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); + opcode = QLCNIC_MBX_RSP(fw_data); + + if (rsp != QLCNIC_RCODE_TIMEOUT) { + if (opcode == QLCNIC_MBX_LINK_EVENT) { + for (i = 0; i < rsp_num; i++) { + temp = readl(QLCNIC_MBX_FW(ahw, i)); + fw[i] = temp; + } + qlcnic_83xx_handle_link_aen(adapter, fw); + /* clear fw mbx control register */ + QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); + mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); + if (mbx_val) + goto poll; + } else if (opcode == QLCNIC_MBX_COMP_EVENT) { + for (i = 0; i < rsp_num; i++) { + temp = readl(QLCNIC_MBX_FW(ahw, i)); + fw[i] = temp; + } + qlcnic_83xx_handle_idc_comp_aen(adapter, fw); + /* clear fw mbx control register */ + QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); + mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); + if (mbx_val) + goto poll; + } else if (opcode == QLCNIC_MBX_REQUEST_EVENT) { + /* IDC Request Notification */ + for (i = 0; i < rsp_num; i++) { + temp = readl(QLCNIC_MBX_FW(ahw, i)); + fw[i] = temp; + } + for (i = 0; i < QLC_83XX_MBX_AEN_CNT; i++) { + temp = QLCNIC_MBX_RSP(fw[i]); + adapter->ahw->mbox_aen[i] = temp; + } + queue_delayed_work(adapter->qlcnic_wq, + &adapter->idc_aen_work, 0); + /* clear fw mbx control register */ + QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); + mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); + if (mbx_val) + goto poll; + } else if ((mbx_err_code == QLCNIC_MBX_RSP_OK) || + (mbx_err_code == QLCNIC_MBX_PORT_RSP_OK)) { + qlcnic_83xx_get_mbx_data(adapter, cmd); + rsp = QLCNIC_RCODE_SUCCESS; + } else { + qlcnic_83xx_get_mbx_data(adapter, cmd); + if (opcode == QLCNIC_CMD_CONFIG_MAC_VLAN) { + fw_data = readl(QLCNIC_MBX_FW(ahw, 2)); + mac_cmd_rcode = (u8)fw_data; + if (mac_cmd_rcode == QLC_83XX_NO_NIC_RESOURCE || + mac_cmd_rcode == QLC_83XX_MAC_PRESENT || + mac_cmd_rcode == QLC_83XX_MAC_ABSENT) { + rsp = QLCNIC_RCODE_SUCCESS; + goto out; + } + } + dev_info(&adapter->pdev->dev, + "MBX command 0x%x failed with err:0x%x\n", + opcode, mbx_err_code); + rsp = mbx_err_code; + qlcnic_dump_mbx(adapter, cmd); + } + } else { + dev_info(&adapter->pdev->dev, + "MBX command 0x%x timed out\n", opcode); + qlcnic_dump_mbx(adapter, cmd); + } +out: + /* clear fw mbx control register */ + QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); + spin_unlock(&ahw->mbx_lock); + return rsp; +} + +int qlcnic_83xx_alloc_mbx_args(struct qlcnic_cmd_args *mbx, + struct qlcnic_adapter *adapter, u32 type) +{ + int i, size; + u32 temp; + const struct qlcnic_mailbox_metadata *mbx_tbl; + + mbx_tbl = qlcnic_83xx_mbx_tbl; + size = ARRAY_SIZE(qlcnic_83xx_mbx_tbl); + for (i = 0; i < size; i++) { + if (type == mbx_tbl[i].cmd) { + mbx->req.num = mbx_tbl[i].in_args; + mbx->rsp.num = mbx_tbl[i].out_args; + mbx->req.arg = kcalloc(mbx->req.num, sizeof(u32), + GFP_ATOMIC); + if (!mbx->req.arg) + return -ENOMEM; + mbx->rsp.arg = kcalloc(mbx->rsp.num, sizeof(u32), + GFP_ATOMIC); + if (!mbx->rsp.arg) { + kfree(mbx->req.arg); + mbx->req.arg = NULL; + return -ENOMEM; + } + memset(mbx->req.arg, 0, sizeof(u32) * mbx->req.num); + memset(mbx->rsp.arg, 0, sizeof(u32) * mbx->rsp.num); + temp = adapter->ahw->fw_hal_version << 29; + mbx->req.arg[0] = (type | (mbx->req.num << 16) | temp); + break; + } + } + return 0; +} + +void qlcnic_83xx_idc_aen_work(struct work_struct *work) +{ + struct qlcnic_adapter *adapter; + struct qlcnic_cmd_args cmd; + int i, err = 0; + + adapter = container_of(work, struct qlcnic_adapter, idc_aen_work.work); + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_IDC_ACK); + + for (i = 1; i < QLC_83XX_MBX_AEN_CNT; i++) + cmd.req.arg[i] = adapter->ahw->mbox_aen[i]; + + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_info(&adapter->pdev->dev, + "%s: Mailbox IDC ACK failed.\n", __func__); + qlcnic_free_mbx_args(&cmd); +} + +static void qlcnic_83xx_handle_idc_comp_aen(struct qlcnic_adapter *adapter, + u32 data[]) +{ + dev_dbg(&adapter->pdev->dev, "Completion AEN:0x%x.\n", + QLCNIC_MBX_RSP(data[0])); + return; +} + +void qlcnic_83xx_process_aen(struct qlcnic_adapter *adapter) +{ + u32 mask, resp, event[QLC_83XX_MBX_AEN_CNT]; + int i; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (!spin_trylock(&ahw->mbx_lock)) { + mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); + writel(0, adapter->ahw->pci_base0 + mask); + return; + } + resp = QLCRDX(ahw, QLCNIC_FW_MBX_CTRL); + + if (!(resp & QLCNIC_SET_OWNER)) + goto out; + + for (i = 0; i < QLC_83XX_MBX_AEN_CNT; i++) + event[i] = readl(QLCNIC_MBX_FW(ahw, i)); + + switch (QLCNIC_MBX_RSP(event[0])) { + + case QLCNIC_MBX_LINK_EVENT: + qlcnic_83xx_handle_link_aen(adapter, event); + break; + case QLCNIC_MBX_COMP_EVENT: + qlcnic_83xx_handle_idc_comp_aen(adapter, event); + break; + case QLCNIC_MBX_REQUEST_EVENT: + for (i = 0; i < QLC_83XX_MBX_AEN_CNT; i++) + adapter->ahw->mbox_aen[i] = QLCNIC_MBX_RSP(event[i]); + queue_delayed_work(adapter->qlcnic_wq, + &adapter->idc_aen_work, 0); + break; + case QLCNIC_MBX_TIME_EXTEND_EVENT: + break; + case QLCNIC_MBX_SFP_INSERT_EVENT: + dev_info(&adapter->pdev->dev, "SFP+ Insert AEN:0x%x.\n", + QLCNIC_MBX_RSP(event[0])); + break; + case QLCNIC_MBX_SFP_REMOVE_EVENT: + dev_info(&adapter->pdev->dev, "SFP Removed AEN:0x%x.\n", + QLCNIC_MBX_RSP(event[0])); + break; + default: + dev_dbg(&adapter->pdev->dev, "Unsupported AEN:0x%x.\n", + QLCNIC_MBX_RSP(event[0])); + break; + } + + QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); +out: + mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); + writel(0, adapter->ahw->pci_base0 + mask); + spin_unlock(&ahw->mbx_lock); +} + +static int qlcnic_83xx_add_rings(struct qlcnic_adapter *adapter) +{ + int index, i, err, sds_mbx_size; + u32 *buf, intrpt_id, intr_mask; + u16 context_id; + u8 num_sds; + struct qlcnic_cmd_args cmd; + struct qlcnic_host_sds_ring *sds; + struct qlcnic_sds_mbx sds_mbx; + struct qlcnic_add_rings_mbx_out *mbx_out; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + sds_mbx_size = sizeof(struct qlcnic_sds_mbx); + context_id = recv_ctx->context_id; + num_sds = (adapter->max_sds_rings - QLCNIC_MAX_RING_SETS); + ahw->hw_ops->alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_ADD_RCV_RINGS); + cmd.req.arg[1] = 0 | (num_sds << 8) | (context_id << 16); + + /* set up status rings, mbx 2-81 */ + index = 2; + for (i = 8; i < adapter->max_sds_rings; i++) { + memset(&sds_mbx, 0, sds_mbx_size); + sds = &recv_ctx->sds_rings[i]; + sds->consumer = 0; + memset(sds->desc_head, 0, STATUS_DESC_RINGSIZE(sds)); + sds_mbx.phy_addr = sds->phys_addr; + sds_mbx.sds_ring_size = sds->num_desc; + + if (adapter->flags & QLCNIC_MSIX_ENABLED) + intrpt_id = ahw->intr_tbl[i].id; + else + intrpt_id = QLCRDX(ahw, QLCNIC_DEF_INT_ID); + + if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) + sds_mbx.intrpt_id = intrpt_id; + else + sds_mbx.intrpt_id = 0xffff; + sds_mbx.intrpt_val = 0; + buf = &cmd.req.arg[index]; + memcpy(buf, &sds_mbx, sds_mbx_size); + index += sds_mbx_size / sizeof(u32); + } + + /* send the mailbox command */ + err = ahw->hw_ops->mbx_cmd(adapter, &cmd); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to add rings %d\n", err); + goto out; + } + + mbx_out = (struct qlcnic_add_rings_mbx_out *)&cmd.rsp.arg[1]; + index = 0; + /* status descriptor ring */ + for (i = 8; i < adapter->max_sds_rings; i++) { + sds = &recv_ctx->sds_rings[i]; + sds->crb_sts_consumer = ahw->pci_base0 + + mbx_out->host_csmr[index]; + if (adapter->flags & QLCNIC_MSIX_ENABLED) + intr_mask = ahw->intr_tbl[i].src; + else + intr_mask = QLCRDX(ahw, QLCNIC_DEF_INT_MASK); + + sds->crb_intr_mask = ahw->pci_base0 + intr_mask; + index++; + } +out: + qlcnic_free_mbx_args(&cmd); + return err; +} + +int qlcnic_83xx_create_rx_ctx(struct qlcnic_adapter *adapter) +{ + int i, err, index, sds_mbx_size, rds_mbx_size; + u8 num_sds, num_rds; + u32 *buf, intrpt_id, intr_mask, cap = 0; + struct qlcnic_host_sds_ring *sds; + struct qlcnic_host_rds_ring *rds; + struct qlcnic_sds_mbx sds_mbx; + struct qlcnic_rds_mbx rds_mbx; + struct qlcnic_cmd_args cmd; + struct qlcnic_rcv_mbx_out *mbx_out; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct qlcnic_hardware_context *ahw = adapter->ahw; + num_rds = adapter->max_rds_rings; + + if (adapter->max_sds_rings <= QLCNIC_MAX_RING_SETS) + num_sds = adapter->max_sds_rings; + else + num_sds = QLCNIC_MAX_RING_SETS; + + sds_mbx_size = sizeof(struct qlcnic_sds_mbx); + rds_mbx_size = sizeof(struct qlcnic_rds_mbx); + cap = QLCNIC_CAP0_LEGACY_CONTEXT; + + if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) + cap |= QLC_83XX_FW_CAP_LRO_MSS; + + /* set mailbox hdr and capabilities */ + qlcnic_alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_CREATE_RX_CTX); + cmd.req.arg[1] = cap; + cmd.req.arg[5] = 1 | (num_rds << 5) | (num_sds << 8) | + (QLC_83XX_HOST_RDS_MODE_UNIQUE << 16); + /* set up status rings, mbx 8-57/87 */ + index = QLC_83XX_HOST_SDS_MBX_IDX; + for (i = 0; i < num_sds; i++) { + memset(&sds_mbx, 0, sds_mbx_size); + sds = &recv_ctx->sds_rings[i]; + sds->consumer = 0; + memset(sds->desc_head, 0, STATUS_DESC_RINGSIZE(sds)); + sds_mbx.phy_addr = sds->phys_addr; + sds_mbx.sds_ring_size = sds->num_desc; + if (adapter->flags & QLCNIC_MSIX_ENABLED) + intrpt_id = ahw->intr_tbl[i].id; + else + intrpt_id = QLCRDX(ahw, QLCNIC_DEF_INT_ID); + if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) + sds_mbx.intrpt_id = intrpt_id; + else + sds_mbx.intrpt_id = 0xffff; + sds_mbx.intrpt_val = 0; + buf = &cmd.req.arg[index]; + memcpy(buf, &sds_mbx, sds_mbx_size); + index += sds_mbx_size / sizeof(u32); + } + /* set up receive rings, mbx 88-111/135 */ + index = QLCNIC_HOST_RDS_MBX_IDX; + rds = &recv_ctx->rds_rings[0]; + rds->producer = 0; + memset(&rds_mbx, 0, rds_mbx_size); + rds_mbx.phy_addr_reg = rds->phys_addr; + rds_mbx.reg_ring_sz = rds->dma_size; + rds_mbx.reg_ring_len = rds->num_desc; + /* Jumbo ring */ + rds = &recv_ctx->rds_rings[1]; + rds->producer = 0; + rds_mbx.phy_addr_jmb = rds->phys_addr; + rds_mbx.jmb_ring_sz = rds->dma_size; + rds_mbx.jmb_ring_len = rds->num_desc; + buf = &cmd.req.arg[index]; + memcpy(buf, &rds_mbx, rds_mbx_size); + + /* send the mailbox command */ + err = ahw->hw_ops->mbx_cmd(adapter, &cmd); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to create Rx ctx in firmware%d\n", err); + goto out; + } + mbx_out = (struct qlcnic_rcv_mbx_out *)&cmd.rsp.arg[1]; + recv_ctx->context_id = mbx_out->ctx_id; + recv_ctx->state = mbx_out->state; + recv_ctx->virt_port = mbx_out->vport_id; + dev_info(&adapter->pdev->dev, "Rx Context[%d] Created, state:0x%x\n", + recv_ctx->context_id, recv_ctx->state); + /* Receive descriptor ring */ + /* Standard ring */ + rds = &recv_ctx->rds_rings[0]; + rds->crb_rcv_producer = ahw->pci_base0 + + mbx_out->host_prod[0].reg_buf; + /* Jumbo ring */ + rds = &recv_ctx->rds_rings[1]; + rds->crb_rcv_producer = ahw->pci_base0 + + mbx_out->host_prod[0].jmb_buf; + /* status descriptor ring */ + for (i = 0; i < num_sds; i++) { + sds = &recv_ctx->sds_rings[i]; + sds->crb_sts_consumer = ahw->pci_base0 + + mbx_out->host_csmr[i]; + if (adapter->flags & QLCNIC_MSIX_ENABLED) + intr_mask = ahw->intr_tbl[i].src; + else + intr_mask = QLCRDX(ahw, QLCNIC_DEF_INT_MASK); + sds->crb_intr_mask = ahw->pci_base0 + intr_mask; + } + + if (adapter->max_sds_rings > QLCNIC_MAX_RING_SETS) + err = qlcnic_83xx_add_rings(adapter); +out: + qlcnic_free_mbx_args(&cmd); + return err; +} + +int qlcnic_83xx_create_tx_ctx(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *tx, int ring) +{ + int err; + u16 msix_id; + u32 *buf, intr_mask; + struct qlcnic_cmd_args cmd; + struct qlcnic_tx_mbx mbx; + struct qlcnic_tx_mbx_out *mbx_out; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + /* Reset host resources */ + tx->producer = 0; + tx->sw_consumer = 0; + *(tx->hw_consumer) = 0; + + memset(&mbx, 0, sizeof(struct qlcnic_tx_mbx)); + + /* setup mailbox inbox registerss */ + mbx.phys_addr = tx->phys_addr; + mbx.cnsmr_index = tx->hw_cons_phys_addr; + mbx.size = tx->num_desc; + if (adapter->flags & QLCNIC_MSIX_ENABLED) + msix_id = ahw->intr_tbl[adapter->max_sds_rings + ring].id; + else + msix_id = QLCRDX(ahw, QLCNIC_DEF_INT_ID); + if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) + mbx.intr_id = msix_id; + else + mbx.intr_id = 0xffff; + mbx.src = 0; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CREATE_TX_CTX); + cmd.req.arg[1] = QLCNIC_CAP0_LEGACY_CONTEXT; + cmd.req.arg[5] = QLCNIC_MAX_TX_QUEUES; + buf = &cmd.req.arg[6]; + memcpy(buf, &mbx, sizeof(struct qlcnic_tx_mbx)); + /* send the mailbox command*/ + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to create Tx ctx in firmware 0x%x\n", err); + goto out; + } + mbx_out = (struct qlcnic_tx_mbx_out *)&cmd.rsp.arg[2]; + tx->crb_cmd_producer = ahw->pci_base0 + mbx_out->host_prod; + tx->ctx_id = mbx_out->ctx_id; + if (adapter->flags & QLCNIC_MSIX_ENABLED) { + intr_mask = ahw->intr_tbl[adapter->max_sds_rings + ring].src; + tx->crb_intr_mask = ahw->pci_base0 + intr_mask; + } + dev_info(&adapter->pdev->dev, "Tx Context[0x%x] Created, state:0x%x\n", + tx->ctx_id, mbx_out->state); +out: + qlcnic_free_mbx_args(&cmd); + return err; +} + +void qlcnic_83xx_register_nic_idc_func(struct qlcnic_adapter *adapter, + int enable) +{ + struct qlcnic_cmd_args cmd; + int status; + + if (enable) { + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INIT_NIC_FUNC); + cmd.req.arg[1] = 1 | BIT_0; + } else { + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_STOP_NIC_FUNC); + cmd.req.arg[1] = 0 | BIT_0; + } + status = qlcnic_issue_cmd(adapter, &cmd); + if (status) + dev_err(&adapter->pdev->dev, + "Failed to %s in NIC IDC function event.\n", + (enable ? "register" : "unregister")); + + qlcnic_free_mbx_args(&cmd); +} + +int qlcnic_83xx_set_port_config(struct qlcnic_adapter *adapter) +{ + struct qlcnic_cmd_args cmd; + int err; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_PORT_CONFIG); + cmd.req.arg[1] = adapter->ahw->port_config; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_info(&adapter->pdev->dev, "Set Port Config failed.\n"); + qlcnic_free_mbx_args(&cmd); + return err; +} + +int qlcnic_83xx_get_port_config(struct qlcnic_adapter *adapter) +{ + struct qlcnic_cmd_args cmd; + int err; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_PORT_CONFIG); + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_info(&adapter->pdev->dev, "Get Port config failed\n"); + else + adapter->ahw->port_config = cmd.rsp.arg[1]; + qlcnic_free_mbx_args(&cmd); + return err; +} + +int qlcnic_83xx_setup_link_event(struct qlcnic_adapter *adapter, int enable) +{ + int err; + u32 temp; + struct qlcnic_cmd_args cmd; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_LINK_EVENT); + temp = adapter->recv_ctx->context_id << 16; + cmd.req.arg[1] = (enable ? 1 : 0) | BIT_8 | temp; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_info(&adapter->pdev->dev, + "Setup linkevent mailbox failed\n"); + qlcnic_free_mbx_args(&cmd); + return err; +} + +int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode) +{ + int err; + u32 temp; + struct qlcnic_cmd_args cmd; + + if (adapter->recv_ctx->state == QLCNIC_HOST_CTX_STATE_FREED) + return -EIO; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_MAC_RX_MODE); + temp = adapter->recv_ctx->context_id << 16; + cmd.req.arg[1] = (mode ? 1 : 0) | temp; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_info(&adapter->pdev->dev, + "Promiscous mode config failed\n"); + qlcnic_free_mbx_args(&cmd); + + return err; +} + +int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + int status = 0; + u32 config; + + status = qlcnic_83xx_get_port_config(adapter); + if (status) + return status; + + config = ahw->port_config; + + if (mode == QLCNIC_ILB_MODE) + ahw->port_config |= QLC_83XX_CFG_LOOPBACK_HSS; + if (mode == QLCNIC_ELB_MODE) + ahw->port_config |= QLC_83XX_CFG_LOOPBACK_EXT; + + status = qlcnic_83xx_set_port_config(adapter); + if (status) { + dev_err(&adapter->pdev->dev, + "Failed to Set Loopback Mode = 0x%x.\n", + ahw->port_config); + ahw->port_config = config; + return status; + } + + qlcnic_sre_macaddr_change(adapter, adapter->mac_addr, 0, + QLCNIC_MAC_ADD); + return status; +} + +int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + int status = 0; + u32 config = ahw->port_config; + + if (mode == QLCNIC_ILB_MODE) + ahw->port_config &= ~QLC_83XX_CFG_LOOPBACK_HSS; + if (mode == QLCNIC_ELB_MODE) + ahw->port_config &= ~QLC_83XX_CFG_LOOPBACK_EXT; + + status = qlcnic_83xx_set_port_config(adapter); + if (status) { + dev_err(&adapter->pdev->dev, + "Failed to Clear Loopback Mode = 0x%x.\n", + ahw->port_config); + ahw->port_config = config; + return status; + } + + qlcnic_sre_macaddr_change(adapter, adapter->mac_addr, 0, + QLCNIC_MAC_DEL); + return status; +} + +void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, + int mode) +{ + int err; + u32 temp; + struct qlcnic_cmd_args cmd; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_IP_ADDR); + if (mode == QLCNIC_IP_UP) { + temp = adapter->recv_ctx->context_id << 16; + cmd.req.arg[1] = 1 | temp; + } else { + temp = adapter->recv_ctx->context_id << 16; + cmd.req.arg[1] = 2 | temp; + } + cmd.req.arg[2] = ntohl(ip); + + err = qlcnic_issue_cmd(adapter, &cmd); + if (err != QLCNIC_RCODE_SUCCESS) + dev_err(&adapter->netdev->dev, + "could not notify %s IP 0x%x request\n", + (mode == QLCNIC_IP_UP) ? "Add" : "Remove", ip); + qlcnic_free_mbx_args(&cmd); +} + +int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *adapter, int mode) +{ + int err; + u32 temp, arg1; + struct qlcnic_cmd_args cmd; + + if (adapter->recv_ctx->state == QLCNIC_HOST_CTX_STATE_FREED) + return 0; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_HW_LRO); + temp = adapter->recv_ctx->context_id << 16; + arg1 = (mode ? (BIT_0 | BIT_1 | BIT_3) : 0) | temp; + cmd.req.arg[1] = arg1; + + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_info(&adapter->pdev->dev, "LRO config failed\n"); + qlcnic_free_mbx_args(&cmd); + + return err; +} + +int qlcnic_83xx_config_rss(struct qlcnic_adapter *adapter, int enable) +{ + int err; + u32 word; + struct qlcnic_cmd_args cmd; + const u64 key[] = { 0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL, + 0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL, + 0x255b0ec26d5a56daULL }; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_RSS); + + /* + * RSS request: + * bits 3-0: Rsvd + * 5-4: hash_type_ipv4 + * 7-6: hash_type_ipv6 + * 8: enable + * 9: use indirection table + * 16-31: indirection table mask + */ + word = ((u32)(RSS_HASHTYPE_IP_TCP & 0x3) << 4) | + ((u32)(RSS_HASHTYPE_IP_TCP & 0x3) << 6) | + ((u32)(enable & 0x1) << 8) | + ((0x7ULL) << 16); + cmd.req.arg[1] = (adapter->recv_ctx->context_id); + cmd.req.arg[2] = word; + memcpy(&cmd.req.arg[4], key, sizeof(key)); + + err = qlcnic_issue_cmd(adapter, &cmd); + + if (err) + dev_info(&adapter->pdev->dev, "RSS config failed\n"); + qlcnic_free_mbx_args(&cmd); + + return err; + +} + +int qlcnic_83xx_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr, + __le16 vlan_id, u8 op) +{ + int err; + u32 *buf; + struct qlcnic_cmd_args cmd; + struct qlcnic_macvlan_mbx mv; + + if (adapter->recv_ctx->state == QLCNIC_HOST_CTX_STATE_FREED) + return -EIO; + + err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIG_MAC_VLAN); + if (err) + return err; + cmd.req.arg[1] = op | (1 << 8) | + (adapter->recv_ctx->context_id << 16); + + mv.vlan = le16_to_cpu(vlan_id); + memcpy(&mv.mac, addr, ETH_ALEN); + buf = &cmd.req.arg[2]; + memcpy(buf, &mv, sizeof(struct qlcnic_macvlan_mbx)); + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) + dev_err(&adapter->pdev->dev, + "MAC-VLAN %s to CAM failed, err=%d.\n", + ((op == 1) ? "add " : "delete "), err); + qlcnic_free_mbx_args(&cmd); + return err; +} + +void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr, + __le16 vlan_id) +{ + u8 mac[ETH_ALEN]; + memcpy(&mac, addr, ETH_ALEN); + qlcnic_83xx_sre_macaddr_change(adapter, mac, vlan_id, QLCNIC_MAC_ADD); +} + +void qlcnic_83xx_configure_mac(struct qlcnic_adapter *adapter, u8 *mac, + u8 type, struct qlcnic_cmd_args *cmd) +{ + switch (type) { + case QLCNIC_SET_STATION_MAC: + case QLCNIC_SET_FAC_DEF_MAC: + memcpy(&cmd->req.arg[2], mac, sizeof(u32)); + memcpy(&cmd->req.arg[3], &mac[4], sizeof(u16)); + break; + } + cmd->req.arg[1] = type; +} + +int qlcnic_83xx_get_mac_address(struct qlcnic_adapter *adapter, u8 *mac) +{ + int err, i; + struct qlcnic_cmd_args cmd; + u32 mac_low, mac_high; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_MAC_ADDRESS); + qlcnic_83xx_configure_mac(adapter, mac, QLCNIC_GET_CURRENT_MAC, &cmd); + err = qlcnic_issue_cmd(adapter, &cmd); + + if (err == QLCNIC_RCODE_SUCCESS) { + mac_low = cmd.rsp.arg[1]; + mac_high = cmd.rsp.arg[2]; + + for (i = 0; i < 2; i++) + mac[i] = (u8) (mac_high >> ((1 - i) * 8)); + for (i = 2; i < 6; i++) + mac[i] = (u8) (mac_low >> ((5 - i) * 8)); + } else { + dev_err(&adapter->pdev->dev, "Failed to get mac address%d\n", + err); + err = -EIO; + } + qlcnic_free_mbx_args(&cmd); + return err; +} + +void qlcnic_83xx_config_intr_coal(struct qlcnic_adapter *adapter) +{ + int err; + u32 temp; + struct qlcnic_cmd_args cmd; + struct qlcnic_nic_intr_coalesce *coal = &adapter->ahw->coal; + + if (adapter->recv_ctx->state == QLCNIC_HOST_CTX_STATE_FREED) + return; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIG_INTR_COAL); + cmd.req.arg[1] = 1 | (adapter->recv_ctx->context_id << 16); + cmd.req.arg[3] = coal->flag; + temp = coal->rx_time_us << 16; + cmd.req.arg[2] = coal->rx_packets | temp; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err != QLCNIC_RCODE_SUCCESS) + dev_info(&adapter->pdev->dev, + "Failed to send interrupt coalescence parameters\n"); + qlcnic_free_mbx_args(&cmd); +} + +static void qlcnic_83xx_handle_link_aen(struct qlcnic_adapter *adapter, + u32 data[]) +{ + u8 link_status, duplex; + /* link speed */ + link_status = LSB(data[3]) & 1; + adapter->ahw->link_speed = MSW(data[2]); + adapter->ahw->link_autoneg = MSB(MSW(data[3])); + adapter->ahw->module_type = MSB(LSW(data[3])); + duplex = LSB(MSW(data[3])); + if (duplex) + adapter->ahw->link_duplex = DUPLEX_FULL; + else + adapter->ahw->link_duplex = DUPLEX_HALF; + adapter->ahw->has_link_events = 1; + qlcnic_advert_link_change(adapter, link_status); +} + +irqreturn_t qlcnic_83xx_handle_aen(int irq, void *data) +{ + struct qlcnic_adapter *adapter = data; + qlcnic_83xx_process_aen(adapter); + return IRQ_HANDLED; +} + +int qlcnic_enable_eswitch(struct qlcnic_adapter *adapter, u8 port, u8 enable) +{ + int err = -EIO; + struct qlcnic_cmd_args cmd; + + if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) { + dev_err(&adapter->pdev->dev, + "%s: Error, invoked by non management func\n", + __func__); + return err; + } + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_TOGGLE_ESWITCH); + cmd.req.arg[1] = (port & 0xf) | BIT_4; + err = qlcnic_issue_cmd(adapter, &cmd); + + if (err != QLCNIC_RCODE_SUCCESS) { + dev_err(&adapter->pdev->dev, "Failed to enable eswitch%d\n", + err); + err = -EIO; + } + qlcnic_free_mbx_args(&cmd); + + return err; + +} + +int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *nic) +{ + int i, err = -EIO; + struct qlcnic_cmd_args cmd; + + if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) { + dev_err(&adapter->pdev->dev, + "%s: Error, invoked by non management func\n", + __func__); + return err; + } + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_NIC_INFO); + cmd.req.arg[1] = (nic->pci_func << 16); + cmd.req.arg[2] = 0x1 << 16; + cmd.req.arg[3] = nic->phys_port | (nic->switch_mode << 16); + cmd.req.arg[4] = nic->capabilities; + cmd.req.arg[5] = (nic->max_mac_filters & 0xFF) | ((nic->max_mtu) << 16); + cmd.req.arg[6] = (nic->max_tx_ques) | ((nic->max_rx_ques) << 16); + cmd.req.arg[7] = (nic->min_tx_bw) | ((nic->max_tx_bw) << 16); + for (i = 8; i < 32; i++) + cmd.req.arg[i] = 0; + + err = qlcnic_issue_cmd(adapter, &cmd); + + if (err != QLCNIC_RCODE_SUCCESS) { + dev_err(&adapter->pdev->dev, "Failed to set nic info%d\n", + err); + err = -EIO; + } + + qlcnic_free_mbx_args(&cmd); + + return err; +} + +int qlcnic_83xx_get_nic_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *npar_info, u8 func_id) +{ + int err; + u32 temp; + u8 op = 0; + struct qlcnic_cmd_args cmd; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_NIC_INFO); + if (func_id != adapter->ahw->pci_func) { + temp = func_id << 16; + cmd.req.arg[1] = op | BIT_31 | temp; + } else { + cmd.req.arg[1] = adapter->ahw->pci_func << 16; + } + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_info(&adapter->pdev->dev, + "Failed to get nic info %d\n", err); + goto out; + } + + npar_info->op_type = cmd.rsp.arg[1]; + npar_info->pci_func = cmd.rsp.arg[2] & 0xFFFF; + npar_info->op_mode = (cmd.rsp.arg[2] & 0xFFFF0000) >> 16; + npar_info->phys_port = cmd.rsp.arg[3] & 0xFFFF; + npar_info->switch_mode = (cmd.rsp.arg[3] & 0xFFFF0000) >> 16; + npar_info->capabilities = cmd.rsp.arg[4]; + npar_info->max_mac_filters = cmd.rsp.arg[5] & 0xFF; + npar_info->max_mtu = (cmd.rsp.arg[5] & 0xFFFF0000) >> 16; + npar_info->max_tx_ques = cmd.rsp.arg[6] & 0xFFFF; + npar_info->max_rx_ques = (cmd.rsp.arg[6] & 0xFFFF0000) >> 16; + npar_info->min_tx_bw = cmd.rsp.arg[7] & 0xFFFF; + npar_info->max_tx_bw = (cmd.rsp.arg[7] & 0xFFFF0000) >> 16; + if (cmd.rsp.arg[8] & 0x1) + npar_info->max_bw_reg_offset = (cmd.rsp.arg[8] & 0x7FFE) >> 1; + if (cmd.rsp.arg[8] & 0x10000) { + temp = (cmd.rsp.arg[8] & 0x7FFE0000) >> 17; + npar_info->max_linkspeed_reg_offset = temp; + } + +out: + qlcnic_free_mbx_args(&cmd); + return err; +} + +int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *adapter, + struct qlcnic_pci_info *pci_info) +{ + int i, err = 0, j = 0; + u32 temp; + struct qlcnic_cmd_args cmd; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_PCI_INFO); + err = qlcnic_issue_cmd(adapter, &cmd); + + adapter->ahw->act_pci_func = 0; + if (err == QLCNIC_RCODE_SUCCESS) { + pci_info->func_count = cmd.rsp.arg[1] & 0xFF; + dev_info(&adapter->pdev->dev, + "%s: total functions = %d\n", + __func__, pci_info->func_count); + for (i = 2, j = 0; j < QLCNIC_MAX_PCI_FUNC; j++, pci_info++) { + pci_info->id = cmd.rsp.arg[i] & 0xFFFF; + pci_info->active = (cmd.rsp.arg[i] & 0xFFFF0000) >> 16; + i++; + pci_info->type = cmd.rsp.arg[i] & 0xFFFF; + if (pci_info->type == QLCNIC_TYPE_NIC) + adapter->ahw->act_pci_func++; + temp = (cmd.rsp.arg[i] & 0xFFFF0000) >> 16; + pci_info->default_port = temp; + i++; + pci_info->tx_min_bw = cmd.rsp.arg[i] & 0xFFFF; + temp = (cmd.rsp.arg[i] & 0xFFFF0000) >> 16; + pci_info->tx_max_bw = temp; + i = i + 2; + memcpy(pci_info->mac, &cmd.rsp.arg[i], ETH_ALEN - 2); + i++; + memcpy(pci_info->mac + sizeof(u32), &cmd.rsp.arg[i], 2); + i = i + 3; + + dev_info(&adapter->pdev->dev, "%s:\n" + "\tid = %d active = %d type = %d\n" + "\tport = %d min bw = %d max bw = %d\n" + "\tmac_addr = %pM\n", __func__, + pci_info->id, pci_info->active, pci_info->type, + pci_info->default_port, pci_info->tx_min_bw, + pci_info->tx_max_bw, pci_info->mac); + } + } else { + dev_err(&adapter->pdev->dev, "Failed to get PCI Info%d\n", + err); + err = -EIO; + } + + qlcnic_free_mbx_args(&cmd); + + return err; +} + +int qlcnic_83xx_config_intrpt(struct qlcnic_adapter *adapter, bool op_type) +{ + int i, index, err; + bool type; + u8 max_ints; + u32 val, temp; + struct qlcnic_cmd_args cmd; + + max_ints = adapter->ahw->num_msix; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIG_INTRPT); + cmd.req.arg[1] = max_ints; + for (i = 0, index = 2; i < max_ints; i++) { + type = op_type ? QLCNIC_INTRPT_ADD : QLCNIC_INTRPT_DEL; + val = type | (adapter->ahw->intr_tbl[i].type << 4); + if (adapter->ahw->intr_tbl[i].type == QLCNIC_INTRPT_MSIX) + val |= (adapter->ahw->intr_tbl[i].id << 16); + cmd.req.arg[index++] = val; + } + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to configure interrupts 0x%x\n", err); + goto out; + } + + max_ints = cmd.rsp.arg[1]; + for (i = 0, index = 2; i < max_ints; i++, index += 2) { + val = cmd.rsp.arg[index]; + if (LSB(val)) { + dev_info(&adapter->pdev->dev, + "Can't configure interrupt %d\n", + adapter->ahw->intr_tbl[i].id); + continue; + } + if (op_type) { + adapter->ahw->intr_tbl[i].id = MSW(val); + adapter->ahw->intr_tbl[i].enabled = 1; + temp = cmd.rsp.arg[index + 1]; + adapter->ahw->intr_tbl[i].src = temp; + } else { + adapter->ahw->intr_tbl[i].id = i; + adapter->ahw->intr_tbl[i].enabled = 0; + adapter->ahw->intr_tbl[i].src = 0; + } + } +out: + qlcnic_free_mbx_args(&cmd); + return err; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h new file mode 100644 index 0000000..9d707be --- /dev/null +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -0,0 +1,250 @@ +#ifndef __QLCNIC_83XX_HW_H +#define __QLCNIC_83XX_HW_H + +#include +#include +#include "qlcnic_hw.h" + +/* Directly mapped registers */ +#define QLC_83XX_CRB_WIN_BASE 0x3800 +#define QLC_83XX_CRB_WIN_FUNC(f) (QLC_83XX_CRB_WIN_BASE+((f)*4)) +#define QLC_83XX_SEM_LOCK_BASE 0x3840 +#define QLC_83XX_SEM_UNLOCK_BASE 0x3844 +#define QLC_83XX_SEM_LOCK_FUNC(f) (QLC_83XX_SEM_LOCK_BASE+((f)*8)) +#define QLC_83XX_SEM_UNLOCK_FUNC(f) (QLC_83XX_SEM_UNLOCK_BASE+((f)*8)) +#define QLC_83XX_LINK_STATE(f) (0x3698+((f) > 7 ? 4 : 0)) +#define QLC_83XX_LINK_SPEED(f) (0x36E0+(((f) >> 2) * 4)) +#define QLC_83XX_LINK_SPEED_FACTOR 10 +#define QLC_83xx_FUNC_VAL(v, f) ((v) & (1 << (f * 4))) +#define QLC_83XX_INTX_PTR 0x38C0 +#define QLC_83XX_INTX_TRGR 0x38C4 +#define QLC_83XX_INTX_MASK 0x38C8 + +#define QLC_83XX_DRV_LOCK_WAIT_COUNTER 100 +#define QLC_83XX_DRV_LOCK_WAIT_DELAY 20 +#define QLC_83XX_NEED_DRV_LOCK_RECOVERY 1 +#define QLC_83XX_DRV_LOCK_RECOVERY_IN_PROGRESS 2 +#define QLC_83XX_MAX_DRV_LOCK_RECOVERY_ATTEMPT 3 +#define QLC_83XX_DRV_LOCK_RECOVERY_DELAY 200 +#define QLC_83XX_DRV_LOCK_RECOVERY_STATUS_MASK 0x3 + +#define QLC_83XX_NO_NIC_RESOURCE 0x5 +#define QLC_83XX_MAC_PRESENT 0xC +#define QLC_83XX_MAC_ABSENT 0xD + + +#define QLC_83XX_FLASH_SECTOR_SIZE (64 * 1024) + +/* PEG status definitions */ +#define QLC_83XX_CMDPEG_COMPLETE 0xff01 +#define QLC_83XX_VALID_INTX_BIT30(val) ((val) & BIT_30) +#define QLC_83XX_VALID_INTX_BIT31(val) ((val) & BIT_31) +#define QLC_83XX_INTX_FUNC(val) ((val) & 0xFF) +#define QLC_83XX_LEGACY_INTX_MAX_RETRY 100 +#define QLC_83XX_LEGACY_INTX_DELAY 4 +#define QLC_83XX_REG_DESC 1 +#define QLC_83XX_LRO_DESC 2 +#define QLC_83XX_CTRL_DESC 3 +#define QLC_83XX_FW_CAPABILITY_TSO BIT_6 +#define QLC_83XX_FW_CAP_LRO_MSS BIT_17 +#define QLC_83XX_HOST_RDS_MODE_UNIQUE 0 +#define QLC_83XX_HOST_SDS_MBX_IDX 8 + +#define QLCNIC_HOST_RDS_MBX_IDX 88 +#define QLCNIC_MAX_RING_SETS 8 + +struct qlcnic_intrpt_config { + u8 type; + u8 enabled; + u16 id; + u32 src; +}; + +struct qlcnic_macvlan_mbx { + u8 mac[ETH_ALEN]; + u16 vlan; +}; + + +/* Mailbox process AEN count */ +#define QLC_83XX_IDC_COMP_AEN 3 +#define QLC_83XX_MBX_AEN_CNT 5 +#define QLC_83XX_MODULE_LOADED 1 +#define QLC_83XX_MBX_READY 2 +#define QLC_83XX_MBX_AEN_ACK 3 +#define QLC_83XX_SFP_PRESENT(data) ((data) & 3) +#define QLC_83XX_SFP_ERR(data) (((data) >> 2) & 3) +#define QLC_83XX_SFP_MODULE_TYPE(data) (((data) >> 4) & 0x1F) +#define QLC_83XX_SFP_CU_LENGTH(data) (LSB((data) >> 16)) +#define QLC_83XX_SFP_TX_FAULT(data) ((data) & BIT_10) +#define QLC_83XX_SFP_10G_CAPABLE(data) ((data) & BIT_11) +#define QLC_83XX_LINK_STATS(data) ((data) & BIT_0) +#define QLC_83XX_CURRENT_LINK_SPEED(data) (((data) >> 3) & 7) +#define QLC_83XX_LINK_PAUSE(data) (((data) >> 6) & 3) +#define QLC_83XX_LINK_LB(data) (((data) >> 8) & 7) +#define QLC_83XX_LINK_FEC(data) ((data) & BIT_12) +#define QLC_83XX_LINK_EEE(data) ((data) & BIT_13) +#define QLC_83XX_DCBX(data) (((data) >> 28) & 7) +#define QLC_83XX_AUTONEG(data) ((data) & BIT_15) +#define QLC_83XX_CFG_STD_PAUSE (1 << 5) +#define QLC_83XX_CFG_STD_TX_PAUSE (1 << 20) +#define QLC_83XX_CFG_STD_RX_PAUSE (2 << 20) +#define QLC_83XX_CFG_STD_TX_RX_PAUSE (3 << 20) +#define QLC_83XX_ENABLE_AUTONEG (1 << 15) +#define QLC_83XX_CFG_LOOPBACK_HSS (2 << 1) +#define QLC_83XX_CFG_LOOPBACK_PHY (3 << 1) +#define QLC_83XX_CFG_LOOPBACK_EXT (4 << 1) + +/* LED configuration settings */ +#define QLC_83XX_ENABLE_BEACON 0xe +#define QLC_83XX_LED_RATE 0xff +#define QLC_83XX_LED_ACT (1 << 10) +#define QLC_83XX_LED_MOD (0 << 13) +#define QLC_83XX_LED_CONFIG (QLC_83XX_LED_RATE | QLC_83XX_LED_ACT | \ + QLC_83XX_LED_MOD) + +#define QLC_83XX_10M_LINK 1 +#define QLC_83XX_100M_LINK 2 +#define QLC_83XX_1G_LINK 3 +#define QLC_83XX_10G_LINK 4 +#define QLC_83XX_STAT_TX 3 +#define QLC_83XX_STAT_RX 2 +#define QLC_83XX_STAT_MAC 1 +#define QLC_83XX_TX_STAT_REGS 14 +#define QLC_83XX_RX_STAT_REGS 40 +#define QLC_83XX_MAC_STAT_REGS 80 + +#define QLC_83XX_GET_FUNC_PRIVILEGE(VAL, FN) (0x3 & ((VAL) >> (FN * 2))) +#define QLC_83XX_SET_FUNC_OPMODE(VAL, FN) ((VAL) << (FN * 2)) +#define QLC_83XX_DEFAULT_OPMODE 0x55555555 +#define QLC_83XX_PRIVLEGED_FUNC 0x1 +#define QLC_83XX_VIRTUAL_FUNC 0x2 + +#define QLC_83XX_LB_MAX_FILTERS 2048 +#define QLC_83XX_LB_BUCKET_SIZE 256 +#define QLC_83XX_MINIMUM_VECTOR 3 + +#define QLC_83XX_GET_FUNC_MODE_FROM_NPAR_INFO(val) (val & 0x80000000) +#define QLC_83XX_GET_LRO_CAPABILITY(val) (val & 0x20) +#define QLC_83XX_GET_LSO_CAPABILITY(val) (val & 0x40) +#define QLC_83XX_GET_LSO_CAPABILITY(val) (val & 0x40) +#define QLC_83XX_GET_HW_LRO_CAPABILITY(val) (val & 0x400) +#define QLC_83XX_GET_VLAN_ALIGN_CAPABILITY(val) (val & 0x4000) +#define QLC_83XX_VIRTUAL_NIC_MODE 0xFF +#define QLC_83XX_DEFAULT_MODE 0x0 +#define QLCNIC_BRDTYPE_83XX_10G 0x0083 + +/* Additional registers in 83xx */ +enum qlc_83xx_ext_regs { + QLCNIC_GLOBAL_RESET = 0, + QLCNIC_WILDCARD, + QLCNIC_INFORMANT, + QLCNIC_HOST_MBX_CTRL, + QLCNIC_FW_MBX_CTRL, + QLCNIC_BOOTLOADER_ADDR, + QLCNIC_BOOTLOADER_SIZE, + QLCNIC_FW_IMAGE_ADDR, + QLCNIC_MBX_INTR_ENBL, + QLCNIC_DEF_INT_MASK, + QLCNIC_DEF_INT_ID, + QLC_83XX_IDC_MAJ_VERSION, + QLC_83XX_IDC_DEV_STATE, + QLC_83XX_IDC_DRV_PRESENCE, + QLC_83XX_IDC_DRV_ACK, + QLC_83XX_IDC_CTRL, + QLC_83XX_IDC_DRV_AUDIT, + QLC_83XX_IDC_MIN_VERSION, + QLC_83XX_RECOVER_DRV_LOCK, + QLC_83XX_IDC_PF_0, + QLC_83XX_IDC_PF_1, + QLC_83XX_IDC_PF_2, + QLC_83XX_IDC_PF_3, + QLC_83XX_IDC_PF_4, + QLC_83XX_IDC_PF_5, + QLC_83XX_IDC_PF_6, + QLC_83XX_IDC_PF_7, + QLC_83XX_IDC_PF_8, + QLC_83XX_IDC_PF_9, + QLC_83XX_IDC_PF_10, + QLC_83XX_IDC_PF_11, + QLC_83XX_IDC_PF_12, + QLC_83XX_IDC_PF_13, + QLC_83XX_IDC_PF_14, + QLC_83XX_IDC_PF_15, + QLC_83XX_IDC_DEV_PARTITION_INFO_1, + QLC_83XX_IDC_DEV_PARTITION_INFO_2, + QLC_83XX_DRV_OP_MODE, + QLC_83XX_VNIC_STATE, + QLC_83XX_DRV_LOCK, + QLC_83XX_DRV_UNLOCK, + QLC_83XX_DRV_LOCK_ID, + QLC_83XX_ASIC_TEMP, +}; + +/* 83xx funcitons */ +int qlcnic_83xx_get_fw_version(struct qlcnic_adapter *); +int qlcnic_83xx_mbx_op(struct qlcnic_adapter *, struct qlcnic_cmd_args *); +int qlcnic_83xx_setup_intr(struct qlcnic_adapter *, u8); +void qlcnic_83xx_get_func_no(struct qlcnic_adapter *); +int qlcnic_83xx_cam_lock(struct qlcnic_adapter *); +void qlcnic_83xx_cam_unlock(struct qlcnic_adapter *); +int qlcnic_send_ctrl_op(struct qlcnic_adapter *, struct qlcnic_cmd_args *, u32); +void qlcnic_83xx_write_crb(struct qlcnic_adapter *, char *, loff_t, size_t); +void qlcnic_83xx_read_crb(struct qlcnic_adapter *, char *, loff_t, size_t); +int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *, ulong); +int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *, ulong, u32); +void qlcnic_83xx_process_rcv_diag(struct qlcnic_adapter *, + struct qlcnic_host_sds_ring *, int, u64 []); +int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32); +int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *, u8); +int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *, u8); +int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *, int); +int qlcnic_83xx_config_rss(struct qlcnic_adapter *, int); +int qlcnic_83xx_config_intr_coalesce(struct qlcnic_adapter *); +void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *, u64 *, __le16); +int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info *); +int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *); +void qlcnic_83xx_register_nic_idc_func(struct qlcnic_adapter *, int); + +void qlcnic_ind_wr(struct qlcnic_adapter *, u32, u32); +int qlcnic_ind_rd(struct qlcnic_adapter *, u32); +void qlcnic_83xx_get_stats(struct qlcnic_adapter *, + struct ethtool_stats *, u64 *); +int qlcnic_83xx_create_rx_ctx(struct qlcnic_adapter *); +int qlcnic_83xx_create_tx_ctx(struct qlcnic_adapter *, + struct qlcnic_host_tx_ring *, int); +int qlcnic_83xx_get_nic_info(struct qlcnic_adapter *, struct qlcnic_info *, u8); +int qlcnic_83xx_setup_link_event(struct qlcnic_adapter *, int); +void qlcnic_83xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *); +int qlcnic_83xx_config_intrpt(struct qlcnic_adapter *, bool); +int qlcnic_83xx_sre_macaddr_change(struct qlcnic_adapter *, u8 *, __le16, u8); +int qlcnic_83xx_get_mac_address(struct qlcnic_adapter *, u8 *); +void qlcnic_83xx_configure_mac(struct qlcnic_adapter *, u8 *, u8, + struct qlcnic_cmd_args *); +int qlcnic_83xx_alloc_mbx_args(struct qlcnic_cmd_args *, + struct qlcnic_adapter *, u32); +void qlcnic_free_mbx_args(struct qlcnic_cmd_args *); +void qlcnic_set_npar_data(struct qlcnic_adapter *, const struct qlcnic_info *, + struct qlcnic_info *); +void qlcnic_83xx_config_intr_coal(struct qlcnic_adapter *); +irqreturn_t qlcnic_83xx_handle_aen(int, void *); +int qlcnic_83xx_get_port_info(struct qlcnic_adapter *); +void qlcnic_83xx_enable_mbx_intrpt(struct qlcnic_adapter *); +irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *); +irqreturn_t qlcnic_83xx_tmp_intr(int, void *); +void qlcnic_83xx_enable_intr(struct qlcnic_adapter *, + struct qlcnic_host_sds_ring *); +void qlcnic_83xx_check_vf(struct qlcnic_adapter *, + const struct pci_device_id *); +void qlcnic_83xx_process_aen(struct qlcnic_adapter *); +int qlcnic_83xx_get_port_config(struct qlcnic_adapter *); +int qlcnic_83xx_set_port_config(struct qlcnic_adapter *); +int qlcnic_enable_eswitch(struct qlcnic_adapter *, u8, u8); +int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *); +int qlcnic_83xx_config_default_opmode(struct qlcnic_adapter *); +int qlcnic_83xx_setup_mbx_intr(struct qlcnic_adapter *); +void qlcnic_83xx_free_mbx_intr(struct qlcnic_adapter *); +void qlcnic_83xx_register_map(struct qlcnic_hardware_context *); +void qlcnic_83xx_idc_aen_work(struct work_struct *); +void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *, __be32, int); +#endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h index fa2b8c6..458b9ae 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h @@ -493,7 +493,7 @@ enum { #define QLCNIC_NIU_GB_MAC_CONFIG_1(I) \ (QLCNIC_CRB_NIU + 0x30004 + (I)*0x10000) - +#define MAX_CTL_CHECK 1000 #define TEST_AGT_CTRL (0x00) #define TA_CTL_START BIT_0 @@ -749,6 +749,9 @@ enum { #define QLCNIC_HEARTBEAT_PERIOD_MSECS 200 #define QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT 45 +#define QLCNIC_MAX_MC_COUNT 38 +#define QLCNIC_WATCHDOG_TIMEOUTVALUE 5 + #define ISR_MSI_INT_TRIGGER(FUNC) (QLCNIC_PCIX_PS_REG(PCIX_MSI_F(FUNC))) #define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200) @@ -801,7 +804,8 @@ static const u32 MIU_TEST_READ_DATA[] = { enum { QLCNIC_MGMT_FUNC = 0, QLCNIC_PRIV_FUNC = 1, - QLCNIC_NON_PRIV_FUNC = 2 + QLCNIC_NON_PRIV_FUNC = 2, + QLCNIC_UNKNOWN_FUNC_MODE = 3 }; enum { @@ -1018,6 +1022,8 @@ enum { #define QLCNIC_NIU_PROMISC_MODE 1 #define QLCNIC_NIU_ALLMULTI_MODE 2 +#define QLCNIC_PCIE_SEM_TIMEOUT 10000 + struct crb_128M_2M_sub_block_map { unsigned valid; unsigned start_128M; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 284618b..d692aa8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -344,21 +344,26 @@ qlcnic_pcie_sem_unlock(struct qlcnic_adapter *adapter, int sem) QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_UNLOCK(sem))); } -static int qlcnic_ind_rd(struct qlcnic_adapter *adapter, u32 addr) +int qlcnic_ind_rd(struct qlcnic_adapter *adapter, u32 addr) { u32 data; if (qlcnic_82xx_check(adapter)) qlcnic_read_window_reg(addr, adapter->ahw->pci_base0, &data); - else - return -EIO; + else { + data = qlcnic_83xx_rd_reg_indirect(adapter, addr); + if (data == -EIO) + return -EIO; + } return data; } -static void qlcnic_ind_wr(struct qlcnic_adapter *adapter, u32 addr, u32 data) +void qlcnic_ind_wr(struct qlcnic_adapter *adapter, u32 addr, u32 data) { if (qlcnic_82xx_check(adapter)) qlcnic_write_window_reg(addr, adapter->ahw->pci_base0, data); + else + qlcnic_83xx_wrt_reg_indirect(adapter, addr, data); } static int @@ -553,19 +558,20 @@ void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter) struct qlcnic_filter *tmp_fil; struct hlist_node *tmp_hnode, *n; struct hlist_head *head; - int i; + int i, time; + u8 cmd; - for (i = 0; i < adapter->fhash.fmax; i++) { + for (i = 0; i < adapter->fhash.fbucket_size; i++) { head = &(adapter->fhash.fhead[i]); - - hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) - { - if (jiffies > - (QLCNIC_FILTER_AGE * HZ + tmp_fil->ftime)) { + hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) { + cmd = tmp_fil->vlan_id ? QLCNIC_MAC_VLAN_DEL : + QLCNIC_MAC_DEL; + time = tmp_fil->ftime; + if (jiffies > (QLCNIC_FILTER_AGE * HZ + time)) { qlcnic_sre_macaddr_change(adapter, - tmp_fil->faddr, tmp_fil->vlan_id, - tmp_fil->vlan_id ? QLCNIC_MAC_VLAN_DEL : - QLCNIC_MAC_DEL); + tmp_fil->faddr, + tmp_fil->vlan_id, + cmd); spin_lock_bh(&adapter->mac_learn_lock); adapter->fhash.fnum--; hlist_del(&tmp_fil->fnode); @@ -582,14 +588,17 @@ void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter) struct hlist_node *tmp_hnode, *n; struct hlist_head *head; int i; + u8 cmd; - for (i = 0; i < adapter->fhash.fmax; i++) { + for (i = 0; i < adapter->fhash.fbucket_size; i++) { head = &(adapter->fhash.fhead[i]); - hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) { - qlcnic_sre_macaddr_change(adapter, tmp_fil->faddr, - tmp_fil->vlan_id, tmp_fil->vlan_id ? - QLCNIC_MAC_VLAN_DEL : QLCNIC_MAC_DEL); + cmd = tmp_fil->vlan_id ? QLCNIC_MAC_VLAN_DEL : + QLCNIC_MAC_DEL; + qlcnic_sre_macaddr_change(adapter, + tmp_fil->faddr, + tmp_fil->vlan_id, + cmd); spin_lock_bh(&adapter->mac_learn_lock); adapter->fhash.fnum--; hlist_del(&tmp_fil->fnode); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 937d75f..9673e2b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -36,6 +36,14 @@ enum qlcnic_regs { #define QLC_SHARED_REG_WR32(a, addr, value) \ writel(value, ((a)->ahw->pci_base0) + ((a)->ahw->reg_tbl[addr])) +/* Read from a direct address offset from BAR0, additional registers */ +#define QLCRDX(ahw, addr) \ + readl(((ahw)->pci_base0) + ((ahw)->ext_reg_tbl[addr])) + +/* Write to a direct address offset from BAR0, additional registers */ +#define QLCWRX(ahw, addr, value) \ + writel(value, (((ahw)->pci_base0) + ((ahw)->ext_reg_tbl[addr]))) + #define QLCNIC_CMD_CONFIGURE_IP_ADDR 0x1 #define QLCNIC_CMD_CONFIG_INTRPT 0x2 #define QLCNIC_CMD_CREATE_RX_CTX 0x7 @@ -85,6 +93,7 @@ enum qlcnic_regs { #define QLCNIC_CMD_GET_LINK_STATUS 0x68 #define QLCNIC_CMD_SET_LED_CONFIG 0x69 #define QLCNIC_CMD_GET_LED_CONFIG 0x6A +#define QLCNIC_CMD_ADD_RCV_RINGS 0x0B #define QLCNIC_INTRPT_INTX 1 #define QLCNIC_INTRPT_MSIX 3 @@ -110,6 +119,13 @@ struct qlcnic_mailbox_metadata { u32 out_args; }; +/* Mailbox ownership */ +#define QLCNIC_GET_OWNER(val) ((val) & (BIT_0 | BIT_1)) + +#define QLCNIC_SET_OWNER 1 +#define QLCNIC_CLR_OWNER 0 +#define QLCNIC_MBX_TIMEOUT 10000 + #define QLCNIC_MBX_RSP_OK 1 #define QLCNIC_MBX_PORT_RSP_OK 0x1a @@ -166,4 +182,5 @@ int qlcnic_82xx_api_lock(struct qlcnic_adapter *); void qlcnic_82xx_api_unlock(struct qlcnic_adapter *); void qlcnic_82xx_napi_enable(struct qlcnic_adapter *); void qlcnic_82xx_napi_disable(struct qlcnic_adapter *); +void qlcnic_82xx_napi_del(struct qlcnic_adapter *); #endif /* __QLCNIC_HW_H_ */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 8d9202f..d678e6d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -487,8 +487,7 @@ drop_packet: return NETDEV_TX_OK; } -static void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, - int linkup) +void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup) { struct net_device *netdev = adapter->netdev; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 73b4f67..9498b39 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -347,7 +347,7 @@ static struct qlcnic_hardware_ops qlcnic_hw_ops = { .get_board_info = qlcnic_82xx_get_board_info, }; -static int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) +int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) { struct pci_dev *pdev = adapter->pdev; int err = -1; -- cgit v0.10.2 From 4be41e92f7c613d6c08686374ad0fdeaaa2a7280 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:20 +0000 Subject: qlcnic: 83xx data path routines Add 83xx adapter data path routines Update few 82xx adapter data path routines Modify datapath resource allocation routines Signed-off-by: Anirban Chakraborty Signed-off-by: Sucheta Chakraborty Signed-off-by: Sritej Velaga Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 2b7adda..31cf1b1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -431,6 +431,7 @@ struct qlcnic_adapter_stats { u64 rx_dma_map_error; u64 tx_dma_map_error; u64 spurious_intr; + u64 mac_filter_limit_overrun; }; /* @@ -469,6 +470,7 @@ struct qlcnic_host_sds_ring { } ____cacheline_internodealigned_in_smp; struct qlcnic_host_tx_ring { + int irq; void __iomem *crb_intr_mask; char name[IFNAMSIZ+4]; u16 ctx_id; @@ -477,6 +479,8 @@ struct qlcnic_host_tx_ring { u32 num_desc; void __iomem *crb_cmd_producer; struct cmd_desc_type0 *desc_head; + struct qlcnic_adapter *adapter; + struct napi_struct napi; struct qlcnic_cmd_buffer *cmd_buf_arr; __le32 *hw_consumer; @@ -1402,7 +1406,7 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter); int qlcnic_check_fw_status(struct qlcnic_adapter *adapter); void qlcnic_watchdog_task(struct work_struct *work); void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, - struct qlcnic_host_rds_ring *rds_ring); + struct qlcnic_host_rds_ring *rds_ring, u8 ring_id); int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max); void qlcnic_set_multi(struct net_device *netdev); void qlcnic_free_mac_list(struct qlcnic_adapter *adapter); @@ -1443,7 +1447,6 @@ int qlcnic_clear_esw_stats(struct qlcnic_adapter *adapter, u8, u8, u8); int qlcnic_get_mac_stats(struct qlcnic_adapter *, struct qlcnic_mac_statistics *); void qlcnic_free_mbx_args(struct qlcnic_cmd_args *cmd); -void qlcnic_napi_del(struct qlcnic_adapter *); int qlcnic_alloc_sds_rings(struct qlcnic_recv_context *, int); void qlcnic_free_sds_rings(struct qlcnic_recv_context *); @@ -1495,6 +1498,7 @@ struct qlcnic_nic_template { void (*request_reset) (struct qlcnic_adapter *, u32); void (*cancel_idc_work) (struct qlcnic_adapter *); int (*napi_add)(struct qlcnic_adapter *, struct net_device *); + void (*napi_del)(struct qlcnic_adapter *); void (*config_ipaddr)(struct qlcnic_adapter *, __be32, int); irqreturn_t (*clear_legacy_intr)(struct qlcnic_adapter *); }; @@ -1670,6 +1674,11 @@ static inline int qlcnic_napi_add(struct qlcnic_adapter *adapter, return adapter->nic_ops->napi_add(adapter, netdev); } +static inline void qlcnic_napi_del(struct qlcnic_adapter *adapter) +{ + adapter->nic_ops->napi_del(adapter); +} + static inline void qlcnic_napi_enable(struct qlcnic_adapter *adapter) { adapter->ahw->hw_ops->napi_enable(adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 454cd9f..b2b024c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -242,6 +242,7 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { .get_func_no = qlcnic_83xx_get_func_no, .api_lock = qlcnic_83xx_cam_lock, .api_unlock = qlcnic_83xx_cam_unlock, + .process_lb_rcv_ring_diag = qlcnic_83xx_process_rcv_ring_diag, .create_rx_ctx = qlcnic_83xx_create_rx_ctx, .create_tx_ctx = qlcnic_83xx_create_tx_ctx, .setup_link_event = qlcnic_83xx_setup_link_event, @@ -249,6 +250,8 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { .get_pci_info = qlcnic_83xx_get_pci_info, .set_nic_info = qlcnic_83xx_set_nic_info, .change_macvlan = qlcnic_83xx_sre_macaddr_change, + .napi_enable = qlcnic_83xx_napi_enable, + .napi_disable = qlcnic_83xx_napi_disable, .config_intr_coal = qlcnic_83xx_config_intr_coal, .config_rss = qlcnic_83xx_config_rss, .config_hw_lro = qlcnic_83xx_config_hw_lro, @@ -262,6 +265,8 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { static struct qlcnic_nic_template qlcnic_83xx_ops = { .config_bridged_mode = qlcnic_config_bridged_mode, .config_led = qlcnic_config_led, + .napi_add = qlcnic_83xx_napi_add, + .napi_del = qlcnic_83xx_napi_del, .config_ipaddr = qlcnic_83xx_config_ipaddr, .clear_legacy_intr = qlcnic_83xx_clear_legacy_intr, }; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 9d707be..e2cfc86 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -193,8 +193,7 @@ void qlcnic_83xx_write_crb(struct qlcnic_adapter *, char *, loff_t, size_t); void qlcnic_83xx_read_crb(struct qlcnic_adapter *, char *, loff_t, size_t); int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *, ulong); int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *, ulong, u32); -void qlcnic_83xx_process_rcv_diag(struct qlcnic_adapter *, - struct qlcnic_host_sds_ring *, int, u64 []); +void qlcnic_83xx_process_rcv_diag(struct qlcnic_adapter *, int, u64 []); int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32); int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *, u8); int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *, u8); @@ -206,6 +205,11 @@ int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info *); int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *); void qlcnic_83xx_register_nic_idc_func(struct qlcnic_adapter *, int); +int qlcnic_83xx_napi_add(struct qlcnic_adapter *, struct net_device *); +void qlcnic_83xx_napi_del(struct qlcnic_adapter *); +void qlcnic_83xx_napi_enable(struct qlcnic_adapter *); +void qlcnic_83xx_napi_disable(struct qlcnic_adapter *); + void qlcnic_ind_wr(struct qlcnic_adapter *, u32, u32); int qlcnic_ind_rd(struct qlcnic_adapter *, u32); void qlcnic_83xx_get_stats(struct qlcnic_adapter *, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 7ebd861..3098a14 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -498,36 +498,42 @@ qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config) int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter) { void *addr; - int err; - int ring; + int err, ring; struct qlcnic_recv_context *recv_ctx; struct qlcnic_host_rds_ring *rds_ring; struct qlcnic_host_sds_ring *sds_ring; struct qlcnic_host_tx_ring *tx_ring; + __le32 *ptr; struct pci_dev *pdev = adapter->pdev; recv_ctx = adapter->recv_ctx; - tx_ring = adapter->tx_ring; - tx_ring->hw_consumer = (__le32 *) dma_alloc_coherent(&pdev->dev, - sizeof(u32), &tx_ring->hw_cons_phys_addr, GFP_KERNEL); - if (tx_ring->hw_consumer == NULL) { - dev_err(&pdev->dev, "failed to allocate tx consumer\n"); - return -ENOMEM; - } + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + ptr = (__le32 *)dma_alloc_coherent(&pdev->dev, sizeof(u32), + &tx_ring->hw_cons_phys_addr, + GFP_KERNEL); - /* cmd desc ring */ - addr = dma_alloc_coherent(&pdev->dev, TX_DESC_RINGSIZE(tx_ring), - &tx_ring->phys_addr, GFP_KERNEL); + if (ptr == NULL) { + dev_err(&pdev->dev, "failed to allocate tx consumer\n"); + return -ENOMEM; + } + tx_ring->hw_consumer = ptr; + /* cmd desc ring */ + addr = dma_alloc_coherent(&pdev->dev, TX_DESC_RINGSIZE(tx_ring), + &tx_ring->phys_addr, + GFP_KERNEL); - if (addr == NULL) { - dev_err(&pdev->dev, "failed to allocate tx desc ring\n"); - err = -ENOMEM; - goto err_out_free; - } + if (addr == NULL) { + dev_err(&pdev->dev, + "failed to allocate tx desc ring\n"); + err = -ENOMEM; + goto err_out_free; + } - tx_ring->desc_head = addr; + tx_ring->desc_head = addr; + } for (ring = 0; ring < adapter->max_rds_rings; ring++) { rds_ring = &recv_ctx->rds_rings[ring]; @@ -624,20 +630,23 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter) recv_ctx = adapter->recv_ctx; - tx_ring = adapter->tx_ring; - if (tx_ring->hw_consumer != NULL) { - dma_free_coherent(&adapter->pdev->dev, - sizeof(u32), - tx_ring->hw_consumer, - tx_ring->hw_cons_phys_addr); - tx_ring->hw_consumer = NULL; - } + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + if (tx_ring->hw_consumer != NULL) { + dma_free_coherent(&adapter->pdev->dev, sizeof(u32), + tx_ring->hw_consumer, + tx_ring->hw_cons_phys_addr); - if (tx_ring->desc_head != NULL) { - dma_free_coherent(&adapter->pdev->dev, - TX_DESC_RINGSIZE(tx_ring), - tx_ring->desc_head, tx_ring->phys_addr); - tx_ring->desc_head = NULL; + tx_ring->hw_consumer = NULL; + } + + if (tx_ring->desc_head != NULL) { + dma_free_coherent(&adapter->pdev->dev, + TX_DESC_RINGSIZE(tx_ring), + tx_ring->desc_head, + tx_ring->phys_addr); + tx_ring->desc_head = NULL; + } } for (ring = 0; ring < adapter->max_rds_rings; ring++) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index 4b41f9b..aa71eba 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -163,13 +163,12 @@ void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter) { struct qlcnic_recv_context *recv_ctx; struct qlcnic_host_rds_ring *rds_ring; - struct qlcnic_host_tx_ring *tx_ring; int ring; recv_ctx = adapter->recv_ctx; if (recv_ctx->rds_rings == NULL) - goto skip_rds; + return; for (ring = 0; ring < adapter->max_rds_rings; ring++) { rds_ring = &recv_ctx->rds_rings[ring]; @@ -177,16 +176,6 @@ void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter) rds_ring->rx_buf_arr = NULL; } kfree(recv_ctx->rds_rings); - -skip_rds: - if (adapter->tx_ring == NULL) - return; - - tx_ring = adapter->tx_ring; - vfree(tx_ring->cmd_buf_arr); - tx_ring->cmd_buf_arr = NULL; - kfree(adapter->tx_ring); - adapter->tx_ring = NULL; } int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter) @@ -194,31 +183,11 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter) struct qlcnic_recv_context *recv_ctx; struct qlcnic_host_rds_ring *rds_ring; struct qlcnic_host_sds_ring *sds_ring; - struct qlcnic_host_tx_ring *tx_ring; struct qlcnic_rx_buffer *rx_buf; int ring, i, size; - struct qlcnic_cmd_buffer *cmd_buf_arr; struct net_device *netdev = adapter->netdev; - size = sizeof(struct qlcnic_host_tx_ring); - tx_ring = kzalloc(size, GFP_KERNEL); - if (tx_ring == NULL) { - dev_err(&netdev->dev, "failed to allocate tx ring struct\n"); - return -ENOMEM; - } - adapter->tx_ring = tx_ring; - - tx_ring->num_desc = adapter->num_txd; - tx_ring->txq = netdev_get_tx_queue(netdev, 0); - - cmd_buf_arr = vzalloc(TX_BUFF_RINGSIZE(tx_ring)); - if (cmd_buf_arr == NULL) { - dev_err(&netdev->dev, "failed to allocate cmd buffer ring\n"); - goto err_out; - } - tx_ring->cmd_buf_arr = cmd_buf_arr; - recv_ctx = adapter->recv_ctx; size = adapter->max_rds_rings * sizeof(struct qlcnic_host_rds_ring); @@ -253,10 +222,11 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter) } rds_ring->rx_buf_arr = vzalloc(RCV_BUFF_RINGSIZE(rds_ring)); if (rds_ring->rx_buf_arr == NULL) { - dev_err(&netdev->dev, "Failed to allocate " - "rx buffer ring %d\n", ring); + dev_err(&netdev->dev, + "Failed to allocate rx buffer ring %d\n", ring); goto err_out; } + INIT_LIST_HEAD(&rds_ring->free_list); /* * Now go through all of them, set reference handles diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index d678e6d..383ecd2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -5,9 +5,6 @@ #include "qlcnic.h" -#define QLCNIC_MAC_HASH(MAC)\ - ((((MAC) & 0x70000) >> 0x10) | (((MAC) & 0x70000000000ULL) >> 0x25)) - #define TX_ETHER_PKT 0x01 #define TX_TCP_PKT 0x02 #define TX_UDP_PKT 0x03 @@ -91,10 +88,61 @@ #define QLCNIC_RESPONSE_DESC 0x05 #define QLCNIC_LRO_DESC 0x12 +#define QLCNIC_TX_POLL_BUDGET 128 +#define QLCNIC_TCP_HDR_SIZE 20 +#define QLCNIC_TCP_TS_OPTION_SIZE 12 +#define QLCNIC_FETCH_RING_ID(handle) ((handle) >> 63) +#define QLCNIC_DESC_OWNER_FW cpu_to_le64(STATUS_OWNER_PHANTOM) + +#define QLCNIC_TCP_TS_HDR_SIZE (QLCNIC_TCP_HDR_SIZE + QLCNIC_TCP_TS_OPTION_SIZE) + /* for status field in status_desc */ #define STATUS_CKSUM_LOOP 0 #define STATUS_CKSUM_OK 2 +#define qlcnic_83xx_pktln(sts) ((sts >> 32) & 0x3FFF) +#define qlcnic_83xx_hndl(sts) ((sts >> 48) & 0x7FFF) +#define qlcnic_83xx_csum_status(sts) ((sts >> 39) & 7) +#define qlcnic_83xx_opcode(sts) ((sts >> 42) & 0xF) +#define qlcnic_83xx_vlan_tag(sts) (((sts) >> 48) & 0xFFFF) +#define qlcnic_83xx_lro_pktln(sts) (((sts) >> 32) & 0x3FFF) +#define qlcnic_83xx_l2_hdr_off(sts) (((sts) >> 16) & 0xFF) +#define qlcnic_83xx_l4_hdr_off(sts) (((sts) >> 24) & 0xFF) +#define qlcnic_83xx_pkt_cnt(sts) (((sts) >> 16) & 0x7) +#define qlcnic_83xx_is_tstamp(sts) (((sts) >> 40) & 1) +#define qlcnic_83xx_is_psh_bit(sts) (((sts) >> 41) & 1) +#define qlcnic_83xx_is_ip_align(sts) (((sts) >> 46) & 1) +#define qlcnic_83xx_has_vlan_tag(sts) (((sts) >> 47) & 1) + +struct sk_buff *qlcnic_process_rxbuf(struct qlcnic_adapter *, + struct qlcnic_host_rds_ring *, u16, u16); + +inline void qlcnic_83xx_enable_tx_intr(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *tx_ring) +{ + writel(0, tx_ring->crb_intr_mask); +} + +inline void qlcnic_83xx_disable_tx_intr(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *tx_ring) +{ + writel(1, tx_ring->crb_intr_mask); +} + +static inline u8 qlcnic_mac_hash(u64 mac) +{ + return (u8)((mac & 0xff) ^ ((mac >> 40) & 0xff)); +} + +static inline u32 qlcnic_get_ref_handle(struct qlcnic_adapter *adapter, + u16 handle, u8 ring_id) +{ + if (adapter->pdev->device == PCI_DEVICE_ID_QLOGIC_QLE834X) + return handle | (ring_id << 15); + else + return handle; +} + void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, __le16 vlan_id) { @@ -128,29 +176,33 @@ void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, } static void qlcnic_send_filter(struct qlcnic_adapter *adapter, - struct qlcnic_host_tx_ring *tx_ring, struct cmd_desc_type0 *first_desc, struct sk_buff *skb) { struct qlcnic_filter *fil, *tmp_fil; struct hlist_node *tmp_hnode, *n; struct hlist_head *head; + struct net_device *netdev = adapter->netdev; struct ethhdr *phdr = (struct ethhdr *)(skb->data); u64 src_addr = 0; __le16 vlan_id = 0; u8 hindex; - if (!compare_ether_addr(phdr->h_source, adapter->mac_addr)) + if (ether_addr_equal(phdr->h_source, adapter->mac_addr)) return; - if (adapter->fhash.fnum >= adapter->fhash.fmax) + if (adapter->fhash.fnum >= adapter->fhash.fmax) { + adapter->stats.mac_filter_limit_overrun++; + netdev_info(netdev, "Can not add more than %d mac addresses\n", + adapter->fhash.fmax); return; + } /* Only NPAR capable devices support vlan based learning */ if (adapter->flags & QLCNIC_ESWITCH_ENABLED) vlan_id = first_desc->vlan_TCI; memcpy(&src_addr, phdr->h_source, ETH_ALEN); - hindex = QLCNIC_MAC_HASH(src_addr) & (QLCNIC_LB_MAX_FILTERS - 1); + hindex = qlcnic_mac_hash(src_addr) & (adapter->fhash.fbucket_size - 1); head = &(adapter->fhash.fhead[hindex]); hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) { @@ -470,7 +522,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) goto unwind_buff; if (adapter->mac_learn) - qlcnic_send_filter(adapter, tx_ring, first_desc, skb); + qlcnic_send_filter(adapter, first_desc, skb); adapter->stats.txbytes += skb->len; adapter->stats.xmitcalled++; @@ -523,8 +575,8 @@ static int qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter, } skb_reserve(skb, NET_IP_ALIGN); - dma = pci_map_single(pdev, skb->data, rds_ring->dma_size, - PCI_DMA_FROMDEVICE); + dma = pci_map_single(pdev, skb->data, + rds_ring->dma_size, PCI_DMA_FROMDEVICE); if (pci_dma_mapping_error(pdev, dma)) { adapter->stats.rx_dma_map_error++; @@ -539,12 +591,13 @@ static int qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter, } static void qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter, - struct qlcnic_host_rds_ring *rds_ring) + struct qlcnic_host_rds_ring *rds_ring, + u8 ring_id) { struct rcv_desc *pdesc; struct qlcnic_rx_buffer *buffer; int count = 0; - uint32_t producer; + uint32_t producer, handle; struct list_head *head; if (!spin_trylock(&rds_ring->lock)) @@ -552,7 +605,6 @@ static void qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter, producer = rds_ring->producer; head = &rds_ring->free_list; - while (!list_empty(head)) { buffer = list_entry(head->next, struct qlcnic_rx_buffer, list); @@ -560,28 +612,29 @@ static void qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter, if (qlcnic_alloc_rx_skb(adapter, rds_ring, buffer)) break; } - count++; list_del(&buffer->list); /* make a rcv descriptor */ pdesc = &rds_ring->desc_head[producer]; - pdesc->reference_handle = cpu_to_le16(buffer->ref_handle); + handle = qlcnic_get_ref_handle(adapter, + buffer->ref_handle, ring_id); + pdesc->reference_handle = cpu_to_le16(handle); pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size); pdesc->addr_buffer = cpu_to_le64(buffer->dma); producer = get_next_index(producer, rds_ring->num_desc); } - if (count) { rds_ring->producer = producer; writel((producer - 1) & (rds_ring->num_desc - 1), rds_ring->crb_rcv_producer); } - spin_unlock(&rds_ring->lock); } -static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter) +static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter, + struct qlcnic_host_tx_ring *tx_ring, + int budget) { u32 sw_consumer, hw_consumer; int i, done, count = 0; @@ -589,7 +642,6 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter) struct pci_dev *pdev = adapter->pdev; struct net_device *netdev = adapter->netdev; struct qlcnic_skb_frag *frag; - struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring; if (!spin_trylock(&adapter->tx_clean_lock)) return 1; @@ -610,22 +662,19 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter) PCI_DMA_TODEVICE); frag->dma = 0ULL; } - adapter->stats.xmitfinished++; dev_kfree_skb_any(buffer->skb); buffer->skb = NULL; } sw_consumer = get_next_index(sw_consumer, tx_ring->num_desc); - if (++count >= MAX_STATUS_HANDLE) + if (++count >= budget) break; } if (count && netif_running(netdev)) { tx_ring->sw_consumer = sw_consumer; - smp_mb(); - if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) { if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH) { netif_wake_queue(netdev); @@ -649,7 +698,6 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter) */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); done = (sw_consumer == hw_consumer); - spin_unlock(&adapter->tx_clean_lock); return done; @@ -657,16 +705,15 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter) static int qlcnic_poll(struct napi_struct *napi, int budget) { + int tx_complete, work_done; struct qlcnic_host_sds_ring *sds_ring; struct qlcnic_adapter *adapter; - int tx_complete, work_done; sds_ring = container_of(napi, struct qlcnic_host_sds_ring, napi); adapter = sds_ring->adapter; - - tx_complete = qlcnic_process_cmd_ring(adapter); + tx_complete = qlcnic_process_cmd_ring(adapter, adapter->tx_ring, + budget); work_done = qlcnic_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { napi_complete(&sds_ring->napi); if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) @@ -799,26 +846,23 @@ static void qlcnic_handle_fw_message(int desc_cnt, int index, } } -static struct sk_buff * -qlcnic_process_rxbuf(struct qlcnic_adapter *adapter, - struct qlcnic_host_rds_ring *rds_ring, u16 index, - u16 cksum) +struct sk_buff *qlcnic_process_rxbuf(struct qlcnic_adapter *adapter, + struct qlcnic_host_rds_ring *ring, + u16 index, u16 cksum) { struct qlcnic_rx_buffer *buffer; struct sk_buff *skb; - buffer = &rds_ring->rx_buf_arr[index]; - + buffer = &ring->rx_buf_arr[index]; if (unlikely(buffer->skb == NULL)) { WARN_ON(1); return NULL; } - pci_unmap_single(adapter->pdev, buffer->dma, rds_ring->dma_size, + pci_unmap_single(adapter->pdev, buffer->dma, ring->dma_size, PCI_DMA_FROMDEVICE); skb = buffer->skb; - if (likely((adapter->netdev->features & NETIF_F_RXCSUM) && (cksum == STATUS_CKSUM_OK || cksum == STATUS_CKSUM_LOOP))) { adapter->stats.csummed++; @@ -827,6 +871,7 @@ qlcnic_process_rxbuf(struct qlcnic_adapter *adapter, skb_checksum_none_assert(skb); } + buffer->skb = NULL; return skb; @@ -1001,9 +1046,9 @@ int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max) struct list_head *cur; struct status_desc *desc; struct qlcnic_rx_buffer *rxbuf; + int opcode, desc_cnt, count = 0; u64 sts_data0, sts_data1; - __le64 owner_phantom = cpu_to_le64(STATUS_OWNER_PHANTOM); - int opcode, ring, desc_cnt, count = 0; + u8 ring; u32 consumer = sds_ring->consumer; while (count < max) { @@ -1015,7 +1060,6 @@ int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max) desc_cnt = qlcnic_get_sts_desc_cnt(sts_data0); opcode = qlcnic_get_sts_opcode(sts_data0); - switch (opcode) { case QLCNIC_RXPKT_DESC: case QLCNIC_OLD_RXPKT_DESC: @@ -1035,18 +1079,16 @@ int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max) default: goto skip; } - WARN_ON(desc_cnt > 1); if (likely(rxbuf)) list_add_tail(&rxbuf->list, &sds_ring->free_list[ring]); else adapter->stats.null_rxbuf++; - skip: for (; desc_cnt > 0; desc_cnt--) { desc = &sds_ring->desc_head[consumer]; - desc->status_desc_data[0] = owner_phantom; + desc->status_desc_data[0] = QLCNIC_DESC_OWNER_FW; consumer = get_next_index(consumer, sds_ring->num_desc); } count++; @@ -1054,7 +1096,6 @@ skip: for (ring = 0; ring < adapter->max_rds_rings; ring++) { rds_ring = &adapter->recv_ctx->rds_rings[ring]; - if (!list_empty(&sds_ring->free_list[ring])) { list_for_each(cur, &sds_ring->free_list[ring]) { rxbuf = list_entry(cur, struct qlcnic_rx_buffer, @@ -1067,7 +1108,7 @@ skip: spin_unlock(&rds_ring->lock); } - qlcnic_post_rx_buffers_nodb(adapter, rds_ring); + qlcnic_post_rx_buffers_nodb(adapter, rds_ring, ring); } if (count) { @@ -1079,12 +1120,12 @@ skip: } void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, - struct qlcnic_host_rds_ring *rds_ring) + struct qlcnic_host_rds_ring *rds_ring, u8 ring_id) { struct rcv_desc *pdesc; struct qlcnic_rx_buffer *buffer; int count = 0; - u32 producer; + u32 producer, handle; struct list_head *head; producer = rds_ring->producer; @@ -1105,7 +1146,9 @@ void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, /* make a rcv descriptor */ pdesc = &rds_ring->desc_head[producer]; pdesc->addr_buffer = cpu_to_le64(buffer->dma); - pdesc->reference_handle = cpu_to_le16(buffer->ref_handle); + handle = qlcnic_get_ref_handle(adapter, buffer->ref_handle, + ring_id); + pdesc->reference_handle = cpu_to_le16(handle); pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size); producer = get_next_index(producer, rds_ring->num_desc); } @@ -1226,8 +1269,7 @@ int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter, for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &recv_ctx->sds_rings[ring]; - - if (ring == max_sds_rings - 1) + if (ring == adapter->max_sds_rings - 1) netif_napi_add(netdev, &sds_ring->napi, qlcnic_poll, QLCNIC_NETDEV_WEIGHT / max_sds_rings); else @@ -1235,10 +1277,15 @@ int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter, QLCNIC_NETDEV_WEIGHT*2); } + if (qlcnic_alloc_tx_rings(adapter, netdev)) { + qlcnic_free_sds_rings(recv_ctx); + return -ENOMEM; + } + return 0; } -void qlcnic_napi_del(struct qlcnic_adapter *adapter) +void qlcnic_82xx_napi_del(struct qlcnic_adapter *adapter) { int ring; struct qlcnic_host_sds_ring *sds_ring; @@ -1250,6 +1297,7 @@ void qlcnic_napi_del(struct qlcnic_adapter *adapter) } qlcnic_free_sds_rings(adapter->recv_ctx); + qlcnic_free_tx_rings(adapter); } void qlcnic_82xx_napi_enable(struct qlcnic_adapter *adapter) @@ -1284,3 +1332,447 @@ void qlcnic_82xx_napi_disable(struct qlcnic_adapter *adapter) napi_disable(&sds_ring->napi); } } + +static struct qlcnic_rx_buffer * +qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter, + struct qlcnic_host_sds_ring *sds_ring, + u8 ring, u64 sts_data[]) +{ + struct net_device *netdev = adapter->netdev; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct qlcnic_rx_buffer *buffer; + struct sk_buff *skb; + struct qlcnic_host_rds_ring *rds_ring; + int index, length, cksum; + u16 vid = 0xffff; + + if (unlikely(ring >= adapter->max_rds_rings)) + return NULL; + + rds_ring = &recv_ctx->rds_rings[ring]; + + index = qlcnic_83xx_hndl(sts_data[0]); + if (unlikely(index >= rds_ring->num_desc)) + return NULL; + + buffer = &rds_ring->rx_buf_arr[index]; + length = qlcnic_83xx_pktln(sts_data[0]); + cksum = qlcnic_83xx_csum_status(sts_data[1]); + skb = qlcnic_process_rxbuf(adapter, rds_ring, index, cksum); + if (!skb) + return buffer; + + if (length > rds_ring->skb_size) + skb_put(skb, rds_ring->skb_size); + else + skb_put(skb, length); + + if (unlikely(qlcnic_check_rx_tagging(adapter, skb, &vid))) { + adapter->stats.rxdropped++; + dev_kfree_skb(skb); + return buffer; + } + + skb->protocol = eth_type_trans(skb, netdev); + + if (vid != 0xffff) + __vlan_hwaccel_put_tag(skb, vid); + + napi_gro_receive(&sds_ring->napi, skb); + + adapter->stats.rx_pkts++; + adapter->stats.rxbytes += length; + + return buffer; +} + +static struct qlcnic_rx_buffer * +qlcnic_83xx_process_lro(struct qlcnic_adapter *adapter, + u8 ring, u64 sts_data[]) +{ + struct net_device *netdev = adapter->netdev; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct qlcnic_rx_buffer *buffer; + struct sk_buff *skb; + struct qlcnic_host_rds_ring *rds_ring; + struct iphdr *iph; + struct ipv6hdr *ipv6h; + struct tcphdr *th; + bool push; + int l2_hdr_offset, l4_hdr_offset; + int index; + u16 lro_length, length, data_offset; + u16 vid = 0xffff; + + if (unlikely(ring > adapter->max_rds_rings)) + return NULL; + + rds_ring = &recv_ctx->rds_rings[ring]; + + index = qlcnic_83xx_hndl(sts_data[0]); + if (unlikely(index > rds_ring->num_desc)) + return NULL; + + buffer = &rds_ring->rx_buf_arr[index]; + + lro_length = qlcnic_83xx_lro_pktln(sts_data[0]); + l2_hdr_offset = qlcnic_83xx_l2_hdr_off(sts_data[1]); + l4_hdr_offset = qlcnic_83xx_l4_hdr_off(sts_data[1]); + push = qlcnic_83xx_is_psh_bit(sts_data[1]); + + skb = qlcnic_process_rxbuf(adapter, rds_ring, index, STATUS_CKSUM_OK); + if (!skb) + return buffer; + if (qlcnic_83xx_is_tstamp(sts_data[1])) + data_offset = l4_hdr_offset + QLCNIC_TCP_TS_HDR_SIZE; + else + data_offset = l4_hdr_offset + QLCNIC_TCP_HDR_SIZE; + + skb_put(skb, lro_length + data_offset); + skb_pull(skb, l2_hdr_offset); + + if (unlikely(qlcnic_check_rx_tagging(adapter, skb, &vid))) { + adapter->stats.rxdropped++; + dev_kfree_skb(skb); + return buffer; + } + + skb->protocol = eth_type_trans(skb, netdev); + if (ntohs(skb->protocol) == ETH_P_IPV6) { + ipv6h = (struct ipv6hdr *)skb->data; + th = (struct tcphdr *)(skb->data + sizeof(struct ipv6hdr)); + + length = (th->doff << 2) + lro_length; + ipv6h->payload_len = htons(length); + } else { + iph = (struct iphdr *)skb->data; + th = (struct tcphdr *)(skb->data + (iph->ihl << 2)); + length = (iph->ihl << 2) + (th->doff << 2) + lro_length; + iph->tot_len = htons(length); + iph->check = 0; + iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); + } + + th->psh = push; + length = skb->len; + + if (vid != 0xffff) + __vlan_hwaccel_put_tag(skb, vid); + + netif_receive_skb(skb); + + adapter->stats.lro_pkts++; + adapter->stats.lrobytes += length; + return buffer; +} + +static int qlcnic_83xx_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, + int max) +{ + struct qlcnic_host_rds_ring *rds_ring; + struct qlcnic_adapter *adapter = sds_ring->adapter; + struct list_head *cur; + struct status_desc *desc; + struct qlcnic_rx_buffer *rxbuf = NULL; + u8 ring; + u64 sts_data[2]; + int count = 0, opcode; + u32 consumer = sds_ring->consumer; + + while (count < max) { + desc = &sds_ring->desc_head[consumer]; + sts_data[1] = le64_to_cpu(desc->status_desc_data[1]); + opcode = qlcnic_83xx_opcode(sts_data[1]); + if (!opcode) + break; + sts_data[0] = le64_to_cpu(desc->status_desc_data[0]); + ring = QLCNIC_FETCH_RING_ID(sts_data[0]); + + switch (opcode) { + case QLC_83XX_REG_DESC: + rxbuf = qlcnic_83xx_process_rcv(adapter, sds_ring, + ring, sts_data); + break; + case QLC_83XX_LRO_DESC: + rxbuf = qlcnic_83xx_process_lro(adapter, ring, + sts_data); + break; + default: + dev_info(&adapter->pdev->dev, + "Unkonwn opcode: 0x%x\n", opcode); + goto skip; + } + + if (likely(rxbuf)) + list_add_tail(&rxbuf->list, &sds_ring->free_list[ring]); + else + adapter->stats.null_rxbuf++; +skip: + desc = &sds_ring->desc_head[consumer]; + /* Reset the descriptor */ + desc->status_desc_data[1] = 0; + consumer = get_next_index(consumer, sds_ring->num_desc); + count++; + } + for (ring = 0; ring < adapter->max_rds_rings; ring++) { + rds_ring = &adapter->recv_ctx->rds_rings[ring]; + if (!list_empty(&sds_ring->free_list[ring])) { + list_for_each(cur, &sds_ring->free_list[ring]) { + rxbuf = list_entry(cur, struct qlcnic_rx_buffer, + list); + qlcnic_alloc_rx_skb(adapter, rds_ring, rxbuf); + } + spin_lock(&rds_ring->lock); + list_splice_tail_init(&sds_ring->free_list[ring], + &rds_ring->free_list); + spin_unlock(&rds_ring->lock); + } + qlcnic_post_rx_buffers_nodb(adapter, rds_ring, ring); + } + if (count) { + sds_ring->consumer = consumer; + writel(consumer, sds_ring->crb_sts_consumer); + } + return count; +} + +static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) +{ + int tx_complete; + int work_done; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_adapter *adapter; + struct qlcnic_host_tx_ring *tx_ring; + + sds_ring = container_of(napi, struct qlcnic_host_sds_ring, napi); + adapter = sds_ring->adapter; + /* tx ring count = 1 */ + tx_ring = adapter->tx_ring; + + if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) + qlcnic_83xx_process_aen(adapter); + + tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); + work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); + if ((work_done < budget) && tx_complete) { + napi_complete(&sds_ring->napi); + if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) + qlcnic_83xx_enable_intr(adapter, sds_ring); + } + + return work_done; +} + +static int qlcnic_83xx_msix_tx_poll(struct napi_struct *napi, int budget) +{ + int work_done; + struct qlcnic_host_tx_ring *tx_ring; + struct qlcnic_adapter *adapter; + + budget = QLCNIC_TX_POLL_BUDGET; + tx_ring = container_of(napi, struct qlcnic_host_tx_ring, napi); + adapter = tx_ring->adapter; + work_done = qlcnic_process_cmd_ring(adapter, tx_ring, budget); + if (work_done) { + napi_complete(&tx_ring->napi); + if (test_bit(__QLCNIC_DEV_UP , &adapter->state)) + qlcnic_83xx_enable_tx_intr(adapter, tx_ring); + } + + return work_done; +} + +static int qlcnic_83xx_rx_poll(struct napi_struct *napi, int budget) +{ + int work_done; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_adapter *adapter; + + sds_ring = container_of(napi, struct qlcnic_host_sds_ring, napi); + adapter = sds_ring->adapter; + work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); + if (work_done < budget) { + napi_complete(&sds_ring->napi); + if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) + qlcnic_83xx_enable_intr(adapter, sds_ring); + } + + return work_done; +} + +void qlcnic_83xx_napi_enable(struct qlcnic_adapter *adapter) +{ + int ring; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_host_tx_ring *tx_ring; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + + if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) + return; + + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + napi_enable(&sds_ring->napi); + qlcnic_83xx_enable_intr(adapter, sds_ring); + } + + if (adapter->flags & QLCNIC_MSIX_ENABLED) { + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + napi_enable(&tx_ring->napi); + qlcnic_83xx_enable_tx_intr(adapter, tx_ring); + } + } +} + +void qlcnic_83xx_napi_disable(struct qlcnic_adapter *adapter) +{ + int ring; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct qlcnic_host_tx_ring *tx_ring; + + if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) + return; + + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + writel(1, sds_ring->crb_intr_mask); + napi_synchronize(&sds_ring->napi); + napi_disable(&sds_ring->napi); + } + + if (adapter->flags & QLCNIC_MSIX_ENABLED) { + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + qlcnic_83xx_disable_tx_intr(adapter, tx_ring); + napi_synchronize(&tx_ring->napi); + napi_disable(&tx_ring->napi); + } + } +} + +int qlcnic_83xx_napi_add(struct qlcnic_adapter *adapter, + struct net_device *netdev) +{ + int ring, max_sds_rings; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_host_tx_ring *tx_ring; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + + if (qlcnic_alloc_sds_rings(recv_ctx, adapter->max_sds_rings)) + return -ENOMEM; + + max_sds_rings = adapter->max_sds_rings; + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + if (adapter->flags & QLCNIC_MSIX_ENABLED) + netif_napi_add(netdev, &sds_ring->napi, + qlcnic_83xx_rx_poll, + QLCNIC_NETDEV_WEIGHT * 2); + else + netif_napi_add(netdev, &sds_ring->napi, + qlcnic_83xx_poll, + QLCNIC_NETDEV_WEIGHT / max_sds_rings); + } + + if (qlcnic_alloc_tx_rings(adapter, netdev)) { + qlcnic_free_sds_rings(recv_ctx); + return -ENOMEM; + } + + if (adapter->flags & QLCNIC_MSIX_ENABLED) { + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + netif_napi_add(netdev, &tx_ring->napi, + qlcnic_83xx_msix_tx_poll, + QLCNIC_NETDEV_WEIGHT); + } + } + + return 0; +} + +void qlcnic_83xx_napi_del(struct qlcnic_adapter *adapter) +{ + int ring; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct qlcnic_host_tx_ring *tx_ring; + + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + netif_napi_del(&sds_ring->napi); + } + + qlcnic_free_sds_rings(adapter->recv_ctx); + + if ((adapter->flags & QLCNIC_MSIX_ENABLED)) { + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + netif_napi_del(&tx_ring->napi); + } + } + + qlcnic_free_tx_rings(adapter); +} + +void qlcnic_83xx_process_rcv_diag(struct qlcnic_adapter *adapter, + int ring, u64 sts_data[]) +{ + struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; + struct sk_buff *skb; + struct qlcnic_host_rds_ring *rds_ring; + int index, length; + + if (unlikely(ring >= adapter->max_rds_rings)) + return; + + rds_ring = &recv_ctx->rds_rings[ring]; + index = qlcnic_83xx_hndl(sts_data[0]); + if (unlikely(index >= rds_ring->num_desc)) + return; + + length = qlcnic_83xx_pktln(sts_data[0]); + + skb = qlcnic_process_rxbuf(adapter, rds_ring, index, STATUS_CKSUM_OK); + if (!skb) + return; + + if (length > rds_ring->skb_size) + skb_put(skb, rds_ring->skb_size); + else + skb_put(skb, length); + + if (!qlcnic_check_loopback_buff(skb->data, adapter->mac_addr)) + adapter->ahw->diag_cnt++; + else + dump_skb(skb, adapter); + + dev_kfree_skb_any(skb); + return; +} + +void qlcnic_83xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) +{ + struct qlcnic_adapter *adapter = sds_ring->adapter; + struct status_desc *desc; + u64 sts_data[2]; + int ring, opcode; + u32 consumer = sds_ring->consumer; + + desc = &sds_ring->desc_head[consumer]; + sts_data[0] = le64_to_cpu(desc->status_desc_data[0]); + sts_data[1] = le64_to_cpu(desc->status_desc_data[1]); + opcode = qlcnic_83xx_opcode(sts_data[1]); + if (!opcode) + return; + + ring = QLCNIC_FETCH_RING_ID(qlcnic_83xx_hndl(sts_data[0])); + qlcnic_83xx_process_rcv_diag(adapter, ring, sts_data); + desc = &sds_ring->desc_head[consumer]; + desc->status_desc_data[0] = cpu_to_le64(STATUS_OWNER_PHANTOM); + consumer = get_next_index(consumer, sds_ring->num_desc); + sds_ring->consumer = consumer; + writel(consumer, sds_ring->crb_sts_consumer); +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 9498b39..ae289ab 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -303,6 +303,7 @@ static struct qlcnic_nic_template qlcnic_ops = { .request_reset = qlcnic_82xx_dev_request_reset, .cancel_idc_work = qlcnic_82xx_cancel_idc_work, .napi_add = qlcnic_82xx_napi_add, + .napi_del = qlcnic_82xx_napi_del, .config_ipaddr = qlcnic_82xx_config_ipaddr, .clear_legacy_intr = qlcnic_82xx_clear_legacy_intr, }; @@ -1201,7 +1202,7 @@ __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) for (ring = 0; ring < adapter->max_rds_rings; ring++) { rds_ring = &adapter->recv_ctx->rds_rings[ring]; - qlcnic_post_rx_buffers(adapter, rds_ring); + qlcnic_post_rx_buffers(adapter, rds_ring, ring); } qlcnic_set_multi(netdev); @@ -1380,21 +1381,11 @@ out: static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter) { int err = 0; - adapter->ahw = kzalloc(sizeof(struct qlcnic_hardware_context), - GFP_KERNEL); - if (!adapter->ahw) { - dev_err(&adapter->pdev->dev, - "Failed to allocate recv ctx resources for adapter\n"); - err = -ENOMEM; - goto err_out; - } adapter->recv_ctx = kzalloc(sizeof(struct qlcnic_recv_context), GFP_KERNEL); if (!adapter->recv_ctx) { dev_err(&adapter->pdev->dev, "Failed to allocate recv ctx resources for adapter\n"); - kfree(adapter->ahw); - adapter->ahw = NULL; err = -ENOMEM; goto err_out; } @@ -1402,6 +1393,8 @@ static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter) adapter->ahw->coal.flag = QLCNIC_INTR_DEFAULT; adapter->ahw->coal.rx_time_us = QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US; adapter->ahw->coal.rx_packets = QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS; + /* clear stats */ + memset(&adapter->stats, 0, sizeof(adapter->stats)); err_out: return err; } @@ -1415,8 +1408,8 @@ static void qlcnic_free_adapter_resources(struct qlcnic_adapter *adapter) vfree(adapter->ahw->fw_dump.tmpl_hdr); adapter->ahw->fw_dump.tmpl_hdr = NULL; } - kfree(adapter->ahw); - adapter->ahw = NULL; + + adapter->ahw->fw_dump.tmpl_hdr = NULL; } int qlcnic_diag_alloc_res(struct net_device *netdev, int test) @@ -1436,6 +1429,7 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test) adapter->max_sds_rings = 1; adapter->ahw->diag_test = test; + adapter->ahw->linkup = 0; ret = qlcnic_attach(adapter); if (ret) { @@ -1452,7 +1446,7 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test) for (ring = 0; ring < adapter->max_rds_rings; ring++) { rds_ring = &adapter->recv_ctx->rds_rings[ring]; - qlcnic_post_rx_buffers(adapter, rds_ring); + qlcnic_post_rx_buffers(adapter, rds_ring, ring); } if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { @@ -1601,6 +1595,66 @@ qlcnic_alloc_msix_entries(struct qlcnic_adapter *adapter, u16 count) return -ENOMEM; } +void qlcnic_free_tx_rings(struct qlcnic_adapter *adapter) +{ + int ring; + struct qlcnic_host_tx_ring *tx_ring; + + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + if (tx_ring && tx_ring->cmd_buf_arr != NULL) { + vfree(tx_ring->cmd_buf_arr); + tx_ring->cmd_buf_arr = NULL; + } + } + if (adapter->tx_ring != NULL) + kfree(adapter->tx_ring); +} + +int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter, + struct net_device *netdev) +{ + int ring, size, vector, index; + struct qlcnic_host_tx_ring *tx_ring; + struct qlcnic_cmd_buffer *cmd_buf_arr; + + size = adapter->max_drv_tx_rings * sizeof(struct qlcnic_host_tx_ring); + tx_ring = kzalloc(size, GFP_KERNEL); + if (tx_ring == NULL) { + dev_err(&netdev->dev, "failed to allocate tx rings\n"); + return -ENOMEM; + } + adapter->tx_ring = tx_ring; + + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + tx_ring->num_desc = adapter->num_txd; + tx_ring->txq = netdev_get_tx_queue(netdev, ring); + cmd_buf_arr = vzalloc(TX_BUFF_RINGSIZE(tx_ring)); + if (cmd_buf_arr == NULL) { + dev_err(&netdev->dev, + "failed to allocate cmd buffer ring\n"); + qlcnic_free_tx_rings(adapter); + return -ENOMEM; + } + memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring)); + tx_ring->cmd_buf_arr = cmd_buf_arr; + } + + if (qlcnic_83xx_check(adapter)) { + for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { + tx_ring = &adapter->tx_ring[ring]; + tx_ring->adapter = adapter; + if (adapter->flags & QLCNIC_MSIX_ENABLED) { + index = adapter->max_sds_rings + ring; + vector = adapter->msix_entries[index].vector; + tx_ring->irq = vector; + } + } + } + return 0; +} + static int __devinit qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { -- cgit v0.10.2 From 13159183ec7afe03ed48d3b083b255278f429b5a Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:21 +0000 Subject: qlcnic: 83xx base driver Enable base 83xx adapter driver. Common driver interface routines like probe, interface up/down routines, irq and resource allocation routines are modified to add support for 83xx adapter. Signed-off-by: Sucheta Chakraborty Signed-off-by: Sritej Velaga Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 31cf1b1..dd9be4f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1377,6 +1377,7 @@ void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter); int qlcnic_dump_fw(struct qlcnic_adapter *); /* Functions from qlcnic_init.c */ +void qlcnic_schedule_work(struct qlcnic_adapter *, work_func_t, int); int qlcnic_load_firmware(struct qlcnic_adapter *adapter); int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter); void qlcnic_request_firmware(struct qlcnic_adapter *adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index e2cfc86..51775e4 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -209,7 +209,6 @@ int qlcnic_83xx_napi_add(struct qlcnic_adapter *, struct net_device *); void qlcnic_83xx_napi_del(struct qlcnic_adapter *); void qlcnic_83xx_napi_enable(struct qlcnic_adapter *); void qlcnic_83xx_napi_disable(struct qlcnic_adapter *); - void qlcnic_ind_wr(struct qlcnic_adapter *, u32, u32); int qlcnic_ind_rd(struct qlcnic_adapter *, u32); void qlcnic_83xx_get_stats(struct qlcnic_adapter *, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index ae289ab..2e69ff8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2,10 +2,15 @@ * QLogic qlcnic NIC Driver * Copyright (c) 2009-2010 QLogic Corporation * + * PCI searching functions pci_get_domain_bus_and_slot & pci_channel_offline + * Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter, + * David Mosberger-Tang + * Copyright (C) 1997 -- 2000 Martin Mares + * Copyright (C) 2003 -- 2004 Greg Kroah-Hartman . + * * See LICENSE.qlcnic for copyright and licensing details. */ -#include #include #include @@ -14,10 +19,10 @@ #include #include +#include #include #include #include -#include #include #include @@ -30,7 +35,6 @@ char qlcnic_driver_name[] = "qlcnic"; static const char qlcnic_driver_string[] = "QLogic 1/10 GbE " "Converged/Intelligent Ethernet Driver v" QLCNIC_LINUX_VERSIONID; -static struct workqueue_struct *qlcnic_wq; static int qlcnic_mac_learn; module_param(qlcnic_mac_learn, int, 0444); MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)"); @@ -63,9 +67,6 @@ static void qlcnic_tx_timeout(struct net_device *netdev); static void qlcnic_attach_work(struct work_struct *work); static void qlcnic_fwinit_work(struct work_struct *work); static void qlcnic_fw_poll_work(struct work_struct *work); -static void qlcnic_schedule_work(struct qlcnic_adapter *adapter, - work_func_t func, int delay); -static void qlcnic_cancel_fw_work(struct qlcnic_adapter *adapter); #ifdef CONFIG_NET_POLL_CONTROLLER static void qlcnic_poll_controller(struct net_device *netdev); #endif @@ -78,6 +79,7 @@ static irqreturn_t qlcnic_tmp_intr(int irq, void *data); static irqreturn_t qlcnic_intr(int irq, void *data); static irqreturn_t qlcnic_msi_intr(int irq, void *data); static irqreturn_t qlcnic_msix_intr(int irq, void *data); +static irqreturn_t qlcnic_msix_tx_intr(int irq, void *data); static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev); static void qlcnic_restore_indev_addr(struct net_device *dev, unsigned long); @@ -94,15 +96,24 @@ static int qlcnic_vlan_rx_del(struct net_device *, u16); #define QLCNIC_IS_TSO_CAPABLE(adapter) \ ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) +static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (adapter->pdev->device == PCI_DEVICE_ID_QLOGIC_QLE824X) + return ahw->capabilities & QLCNIC_FW_CAPABILITY_FVLANTX; + else + return 1; +} + /* PCI Device ID Table */ #define ENTRY(device) \ {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \ .class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0} -#define PCI_DEVICE_ID_QLOGIC_QLE824X 0x8020 - static DEFINE_PCI_DEVICE_TABLE(qlcnic_pci_tbl) = { ENTRY(PCI_DEVICE_ID_QLOGIC_QLE824X), + ENTRY(PCI_DEVICE_ID_QLOGIC_QLE834X), {0,} }; @@ -191,30 +202,6 @@ void qlcnic_free_sds_rings(struct qlcnic_recv_context *recv_ctx) recv_ctx->sds_rings = NULL; } -static void qlcnic_set_msix_bit(struct pci_dev *pdev, int enable) -{ - u32 control; - int pos; - - pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); - if (pos) { - pci_read_config_dword(pdev, pos, &control); - if (enable) - control |= PCI_MSIX_FLAGS_ENABLE; - else - control = 0; - pci_write_config_dword(pdev, pos, control); - } -} - -static void qlcnic_init_msix_entries(struct qlcnic_adapter *adapter, int count) -{ - int i; - - for (i = 0; i < count; i++) - adapter->msix_entries[i].entry = i; -} - static int qlcnic_read_mac_addr(struct qlcnic_adapter *adapter) { @@ -247,7 +234,7 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p) return -EOPNOTSUPP; if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; + return -EINVAL; if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) { netif_device_detach(netdev); @@ -351,31 +338,66 @@ static struct qlcnic_hardware_ops qlcnic_hw_ops = { int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) { struct pci_dev *pdev = adapter->pdev; - int err = -1; + int err = -1, i; + int max_tx_rings; + + if (!adapter->msix_entries) { + adapter->msix_entries = kcalloc(num_msix, + sizeof(struct msix_entry), + GFP_KERNEL); + if (!adapter->msix_entries) { + dev_err(&pdev->dev, "failed allocating msix_entries\n"); + return -ENOMEM; + } + } adapter->max_sds_rings = 1; adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED); - qlcnic_set_msix_bit(pdev, 0); if (adapter->ahw->msix_supported) { enable_msix: - qlcnic_init_msix_entries(adapter, num_msix); + for (i = 0; i < num_msix; i++) + adapter->msix_entries[i].entry = i; err = pci_enable_msix(pdev, adapter->msix_entries, num_msix); if (err == 0) { adapter->flags |= QLCNIC_MSIX_ENABLED; - qlcnic_set_msix_bit(pdev, 1); - - adapter->max_sds_rings = num_msix; - + if (qlcnic_83xx_check(adapter)) { + adapter->ahw->num_msix = num_msix; + /* subtract mail box and tx ring vectors */ + max_tx_rings = adapter->max_drv_tx_rings; + adapter->max_sds_rings = num_msix - + max_tx_rings - 1; + } else { + adapter->max_sds_rings = num_msix; + } dev_info(&pdev->dev, "using msi-x interrupts\n"); return err; - } - if (err > 0) { - num_msix = rounddown_pow_of_two(err); - if (num_msix) + } else if (err > 0) { + dev_info(&pdev->dev, + "Unable to allocate %d MSI-X interrupt vectors\n", + num_msix); + if (qlcnic_83xx_check(adapter)) { + if (err < QLC_83XX_MINIMUM_VECTOR) + return err; + err -= (adapter->max_drv_tx_rings + 1); + num_msix = rounddown_pow_of_two(err); + num_msix += (adapter->max_drv_tx_rings + 1); + } else { + num_msix = rounddown_pow_of_two(err); + } + + if (num_msix) { + dev_info(&pdev->dev, + "Trying %d MSI-X interrupt vectors\n", + num_msix); goto enable_msix; + } + } else { + dev_info(&pdev->dev, "Failed to get %d vectors\n", + num_msix); } } + return err; } @@ -428,6 +450,7 @@ int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) qlcnic_enable_msi_legacy(adapter); return 0; } + static void qlcnic_teardown_intr(struct qlcnic_adapter *adapter) { @@ -435,6 +458,14 @@ qlcnic_teardown_intr(struct qlcnic_adapter *adapter) pci_disable_msix(adapter->pdev); if (adapter->flags & QLCNIC_MSI_ENABLED) pci_disable_msi(adapter->pdev); + + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + + if (adapter->ahw->intr_tbl) { + vfree(adapter->ahw->intr_tbl); + adapter->ahw->intr_tbl = NULL; + } } static void @@ -524,8 +555,11 @@ static int qlcnic_init_pci_info(struct qlcnic_adapter *adapter) j++; } - for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++) + for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++) { adapter->eswitch[i].flags |= QLCNIC_SWITCH_ENABLE; + if (qlcnic_83xx_check(adapter)) + qlcnic_enable_eswitch(adapter, i, 1); + } kfree(pci_info); return 0; @@ -574,29 +608,20 @@ err_lock: return ret; } -static void -qlcnic_check_vf(struct qlcnic_adapter *adapter) +static void qlcnic_check_vf(struct qlcnic_adapter *adapter, + const struct pci_device_id *ent) { - void __iomem *msix_base_addr; - void __iomem *priv_op; - u32 func; - u32 msix_base; u32 op_mode, priv_level; /* Determine FW API version */ - adapter->ahw->fw_hal_version = readl(adapter->ahw->pci_base0 + - QLCNIC_FW_API); + adapter->ahw->fw_hal_version = QLC_SHARED_REG_RD32(adapter, + QLCNIC_FW_API); /* Find PCI function number */ - pci_read_config_dword(adapter->pdev, QLCNIC_MSIX_TABLE_OFFSET, &func); - msix_base_addr = adapter->ahw->pci_base0 + QLCNIC_MSIX_BASE; - msix_base = readl(msix_base_addr); - func = (func - msix_base)/QLCNIC_MSIX_TBL_PGSIZE; - adapter->ahw->pci_func = func; + qlcnic_get_func_no(adapter); /* Determine function privilege level */ - priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE; - op_mode = readl(priv_op); + op_mode = QLC_SHARED_REG_RD32(adapter, QLCNIC_DRV_OP_MODE); if (op_mode == QLC_DEV_DRV_DEFAULT) priv_level = QLCNIC_MGMT_FUNC; else @@ -613,12 +638,16 @@ qlcnic_check_vf(struct qlcnic_adapter *adapter) } #define QLCNIC_82XX_BAR0_LENGTH 0x00200000UL +#define QLCNIC_83XX_BAR0_LENGTH 0x4000 static void qlcnic_get_bar_length(u32 dev_id, ulong *bar) { switch (dev_id) { case PCI_DEVICE_ID_QLOGIC_QLE824X: *bar = QLCNIC_82XX_BAR0_LENGTH; break; + case PCI_DEVICE_ID_QLOGIC_QLE834X: + *bar = QLCNIC_83XX_BAR0_LENGTH; + break; default: *bar = 0; } @@ -713,8 +742,9 @@ qlcnic_check_options(struct qlcnic_adapter *adapter) } } - dev_info(&pdev->dev, "firmware v%d.%d.%d\n", - fw_major, fw_minor, fw_build); + dev_info(&pdev->dev, "Driver v%s, firmware v%d.%d.%d\n", + QLCNIC_LINUX_VERSIONID, fw_major, fw_minor, fw_build); + if (adapter->ahw->port_type == QLCNIC_XGBE) { if (adapter->flags & QLCNIC_ESWITCH_ENABLED) { adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_VF; @@ -760,6 +790,10 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter) adapter->ahw->max_mac_filters = nic_info.max_mac_filters; adapter->ahw->max_mtu = nic_info.max_mtu; + /* Disable NPAR for 83XX */ + if (qlcnic_83xx_check(adapter)) + return err; + if (adapter->ahw->capabilities & BIT_6) adapter->flags |= QLCNIC_ESWITCH_ENABLED; else @@ -839,14 +873,17 @@ qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, struct qlcnic_esw_func_cfg *esw_cfg) { struct net_device *netdev = adapter->netdev; - netdev_features_t features, vlan_features; + unsigned long features, vlan_features; + + if (qlcnic_83xx_check(adapter)) + return; - features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM | + features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO); vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | NETIF_F_HW_VLAN_FILTER); + NETIF_F_IPV6_CSUM); - if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) { + if (QLCNIC_IS_TSO_CAPABLE(adapter)) { features |= (NETIF_F_TSO | NETIF_F_TSO6); vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6); } @@ -856,12 +893,14 @@ qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, if (esw_cfg->offload_flags & BIT_0) { netdev->features |= features; + adapter->rx_csum = 1; if (!(esw_cfg->offload_flags & BIT_1)) netdev->features &= ~NETIF_F_TSO; if (!(esw_cfg->offload_flags & BIT_2)) netdev->features &= ~NETIF_F_TSO6; } else { netdev->features &= ~features; + adapter->rx_csum = 0; } netdev->vlan_features = (features & vlan_features); @@ -870,7 +909,6 @@ qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, static int qlcnic_check_eswitch_mode(struct qlcnic_adapter *adapter) { - void __iomem *priv_op; u32 op_mode, priv_level; int err = 0; @@ -881,8 +919,7 @@ qlcnic_check_eswitch_mode(struct qlcnic_adapter *adapter) if (adapter->flags & QLCNIC_ADAPTER_INITIALIZED) return 0; - priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE; - op_mode = readl(priv_op); + op_mode = QLC_SHARED_REG_RD32(adapter, QLCNIC_DRV_OP_MODE); priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func); if (op_mode == QLC_DEV_DRV_DEFAULT) @@ -947,6 +984,7 @@ static int qlcnic_set_default_offload_settings(struct qlcnic_adapter *adapter) return 0; } + static int qlcnic_reset_eswitch_config(struct qlcnic_adapter *adapter, struct qlcnic_npar_info *npar, int pci_func) @@ -986,8 +1024,7 @@ static int qlcnic_reset_npar_config(struct qlcnic_adapter *adapter) npar = &adapter->npars[i]; pci_func = npar->pci_func; memset(&nic_info, 0, sizeof(struct qlcnic_info)); - err = qlcnic_get_nic_info(adapter, - &nic_info, pci_func); + err = qlcnic_get_nic_info(adapter, &nic_info, pci_func); if (err) return err; nic_info.min_tx_bw = npar->min_bw; @@ -1052,6 +1089,8 @@ qlcnic_set_mgmt_operations(struct qlcnic_adapter *adapter) qlcnic_dev_set_npar_ready(adapter); + if (qlcnic_83xx_check(adapter)) + qlcnic_83xx_register_nic_idc_func(adapter, 1); return err; } @@ -1126,6 +1165,7 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter) { irq_handler_t handler; struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_host_tx_ring *tx_ring; int err, ring; unsigned long flags = 0; @@ -1133,7 +1173,8 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter) struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { - handler = qlcnic_tmp_intr; + if (qlcnic_82xx_check(adapter)) + handler = qlcnic_tmp_intr; if (!QLCNIC_IS_MSI_FAMILY(adapter)) flags |= IRQF_SHARED; @@ -1149,15 +1190,32 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter) } adapter->irq = netdev->irq; - for (ring = 0; ring < adapter->max_sds_rings; ring++) { - sds_ring = &recv_ctx->sds_rings[ring]; - sprintf(sds_ring->name, "%s[%d]", netdev->name, ring); - err = request_irq(sds_ring->irq, handler, - flags, sds_ring->name, sds_ring); - if (err) - return err; + if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) { + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + snprintf(sds_ring->name, sizeof(int) + IFNAMSIZ, + "%s[%d]", netdev->name, ring); + err = request_irq(sds_ring->irq, handler, flags, + sds_ring->name, sds_ring); + if (err) + return err; + } + if (qlcnic_83xx_check(adapter) && + (adapter->flags & QLCNIC_MSIX_ENABLED)) { + handler = qlcnic_msix_tx_intr; + for (ring = 0; ring < adapter->max_drv_tx_rings; + ring++) { + tx_ring = &adapter->tx_ring[ring]; + snprintf(tx_ring->name, sizeof(int) + IFNAMSIZ, + "%s[%d]", netdev->name, + adapter->max_sds_rings + ring); + err = request_irq(tx_ring->irq, handler, flags, + tx_ring->name, tx_ring); + if (err) + return err; + } + } } - return 0; } @@ -1166,12 +1224,23 @@ qlcnic_free_irq(struct qlcnic_adapter *adapter) { int ring; struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_host_tx_ring *tx_ring; struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; - for (ring = 0; ring < adapter->max_sds_rings; ring++) { - sds_ring = &recv_ctx->sds_rings[ring]; - free_irq(sds_ring->irq, sds_ring); + if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) { + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + free_irq(sds_ring->irq, sds_ring); + } + if (qlcnic_83xx_check(adapter)) { + for (ring = 0; ring < adapter->max_drv_tx_rings; + ring++) { + tx_ring = &adapter->tx_ring[ring]; + if (tx_ring->irq) + free_irq(tx_ring->irq, tx_ring); + } + } } } @@ -1229,8 +1298,7 @@ __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) /* Usage: During resume and firmware recovery module.*/ -static int -qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) +static int qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) { int err = 0; @@ -1358,7 +1426,10 @@ void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings) if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - qlcnic_disable_int(sds_ring); + if (qlcnic_83xx_check(adapter)) + writel(1, sds_ring->crb_intr_mask); + else + qlcnic_disable_int(sds_ring); } } @@ -1484,6 +1555,7 @@ qlcnic_reset_hw_context(struct qlcnic_adapter *adapter) netif_device_attach(netdev); clear_bit(__QLCNIC_RESETTING, &adapter->state); + dev_err(&adapter->pdev->dev, "%s:\n", __func__); return 0; } @@ -1527,33 +1599,38 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev, int err; struct pci_dev *pdev = adapter->pdev; + adapter->rx_csum = 1; adapter->ahw->mc_enabled = 0; - adapter->ahw->max_mc_count = 38; + adapter->ahw->max_mc_count = QLCNIC_MAX_MC_COUNT; netdev->netdev_ops = &qlcnic_netdev_ops; - netdev->watchdog_timeo = 5*HZ; + netdev->watchdog_timeo = QLCNIC_WATCHDOG_TIMEOUTVALUE * HZ; qlcnic_change_mtu(netdev, netdev->mtu); SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops); - netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM; + netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | NETIF_F_GRO | + NETIF_F_HW_VLAN_RX); + netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM); - if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) - netdev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6; - if (pci_using_dac == 1) - netdev->hw_features |= NETIF_F_HIGHDMA; + if (QLCNIC_IS_TSO_CAPABLE(adapter)) { + netdev->features |= (NETIF_F_TSO | NETIF_F_TSO6); + netdev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6); + } - netdev->vlan_features = netdev->hw_features; + if (pci_using_dac) { + netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } - if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_FVLANTX) - netdev->hw_features |= NETIF_F_HW_VLAN_TX; - if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO) - netdev->hw_features |= NETIF_F_LRO; + if (qlcnic_vlan_tx_check(adapter)) + netdev->features |= (NETIF_F_HW_VLAN_TX); - netdev->features |= netdev->hw_features | - NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; + if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO) + netdev->features |= NETIF_F_LRO; netdev->irq = adapter->msix_entries[0].vector; @@ -1582,19 +1659,6 @@ static int qlcnic_set_dma_mask(struct pci_dev *pdev, int *pci_using_dac) return 0; } -static int -qlcnic_alloc_msix_entries(struct qlcnic_adapter *adapter, u16 count) -{ - adapter->msix_entries = kcalloc(count, sizeof(struct msix_entry), - GFP_KERNEL); - - if (adapter->msix_entries) - return 0; - - dev_err(&adapter->pdev->dev, "failed allocating msix_entries\n"); - return -ENOMEM; -} - void qlcnic_free_tx_rings(struct qlcnic_adapter *adapter) { int ring; @@ -1691,6 +1755,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ent->device == PCI_DEVICE_ID_QLOGIC_QLE824X) { ahw->hw_ops = &qlcnic_hw_ops; ahw->reg_tbl = (u32 *)qlcnic_reg_tbl; + } else if (ent->device == PCI_DEVICE_ID_QLOGIC_QLE834X) { + qlcnic_83xx_register_map(ahw); + } else { + goto err_out_free_hw_res; } err = qlcnic_setup_pci_map(pdev, ahw); @@ -1708,6 +1776,13 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; + adapter->ahw = ahw; + + adapter->qlcnic_wq = create_singlethread_workqueue("qlcnic"); + if (adapter->qlcnic_wq == NULL) { + dev_err(&pdev->dev, "Failed to create workqueue\n"); + goto err_out_free_netdev; + } err = qlcnic_alloc_adapter_resources(adapter); if (err) @@ -1725,7 +1800,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_LIST_HEAD(&adapter->mac_list); if (qlcnic_82xx_check(adapter)) { - qlcnic_check_vf(adapter); + qlcnic_check_vf(adapter, ent); adapter->portnum = adapter->ahw->pci_func; err = qlcnic_start_firmware(adapter); if (err) { @@ -1738,6 +1813,13 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_hw; adapter->flags |= QLCNIC_NEED_FLR; + } else if (qlcnic_83xx_check(adapter)) { + qlcnic_83xx_check_vf(adapter, ent); + adapter->portnum = adapter->ahw->pci_func; + } else { + dev_err(&pdev->dev, + "%s: failed. Please Reboot\n", __func__); + goto err_out_free_hw; } if (qlcnic_read_mac_addr(adapter)) @@ -1745,18 +1827,20 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (adapter->portnum == 0) { qlcnic_get_board_name(adapter, board_name); + pr_info("%s: %s Board Chip rev 0x%x\n", module_name(THIS_MODULE), board_name, adapter->ahw->revision_id); } - err = qlcnic_alloc_msix_entries(adapter, adapter->ahw->max_rx_ques); - if (err) - goto err_out_disable_msi; - err = qlcnic_setup_intr(adapter, 0); if (err) goto err_out_disable_msi; + if (qlcnic_83xx_check(adapter)) { + err = qlcnic_83xx_setup_mbx_intr(adapter); + if (err) + goto err_out_disable_msi; + } err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac); if (err) @@ -1790,6 +1874,11 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; err_out_disable_mbx_intr: + if (qlcnic_83xx_check(adapter)) { + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_config_intrpt(adapter, 0); + qlcnic_83xx_free_mbx_intr(adapter); + } err_out_disable_msi: qlcnic_teardown_intr(adapter); @@ -1817,10 +1906,11 @@ err_out_disable_pdev: return err; } -static void qlcnic_remove(struct pci_dev *pdev) +static void __devexit qlcnic_remove(struct pci_dev *pdev) { struct qlcnic_adapter *adapter; struct net_device *netdev; + struct qlcnic_hardware_context *ahw; adapter = pci_get_drvdata(pdev); if (adapter == NULL) @@ -1828,10 +1918,17 @@ static void qlcnic_remove(struct pci_dev *pdev) netdev = adapter->netdev; - qlcnic_cancel_fw_work(adapter); + qlcnic_cancel_idc_work(adapter); + ahw = adapter->ahw; unregister_netdev(netdev); + if (qlcnic_83xx_check(adapter)) { + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_config_intrpt(adapter, 0); + qlcnic_83xx_free_mbx_intr(adapter); + } + qlcnic_detach(adapter); if (adapter->npars != NULL) @@ -1847,9 +1944,8 @@ static void qlcnic_remove(struct pci_dev *pdev) qlcnic_free_lb_filters_mem(adapter); qlcnic_teardown_intr(adapter); - kfree(adapter->msix_entries); - qlcnic_remove_diag_entries(adapter); + qlcnic_remove_sysfs(adapter); qlcnic_cleanup_pci_map(adapter); @@ -1860,7 +1956,12 @@ static void qlcnic_remove(struct pci_dev *pdev) pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); + if (adapter->qlcnic_wq) { + destroy_workqueue(adapter->qlcnic_wq); + adapter->qlcnic_wq = NULL; + } qlcnic_free_adapter_resources(adapter); + kfree(ahw); free_netdev(netdev); } static int __qlcnic_shutdown(struct pci_dev *pdev) @@ -1871,7 +1972,7 @@ static int __qlcnic_shutdown(struct pci_dev *pdev) netif_device_detach(netdev); - qlcnic_cancel_fw_work(adapter); + qlcnic_cancel_idc_work(adapter); if (netif_running(netdev)) qlcnic_down(adapter, netdev); @@ -1884,7 +1985,6 @@ static int __qlcnic_shutdown(struct pci_dev *pdev) retval = pci_save_state(pdev); if (retval) return retval; - if (qlcnic_82xx_check(adapter)) { if (qlcnic_wol_supported(adapter)) { pci_enable_wake(pdev, PCI_D3cold, 1); @@ -1932,7 +2032,7 @@ qlcnic_resume(struct pci_dev *pdev) pci_set_master(pdev); pci_restore_state(pdev); - err = adapter->nic_ops->start_firmware(adapter); + err = qlcnic_start_firmware(adapter); if (err) { dev_err(&pdev->dev, "failed to start firmware\n"); return err; @@ -1990,6 +2090,11 @@ static int qlcnic_close(struct net_device *netdev) struct qlcnic_adapter *adapter = netdev_priv(netdev); __qlcnic_down(adapter, netdev); + if (qlcnic_83xx_check(adapter)) { + qlcnic_83xx_register_nic_idc_func(adapter, 0); + cancel_delayed_work_sync(&adapter->idc_aen_work); + } + return 0; } @@ -1997,21 +2102,37 @@ void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter) { void *head; int i; + struct net_device *netdev = adapter->netdev; + u32 filter_size = 0; + u16 act_pci_func = 0; if (adapter->fhash.fmax && adapter->fhash.fhead) return; + act_pci_func = adapter->ahw->act_pci_func; spin_lock_init(&adapter->mac_learn_lock); - head = kcalloc(QLCNIC_LB_MAX_FILTERS, sizeof(struct hlist_head), - GFP_KERNEL); + if (qlcnic_82xx_check(adapter)) { + filter_size = QLCNIC_LB_MAX_FILTERS; + adapter->fhash.fbucket_size = QLCNIC_LB_BUCKET_SIZE; + } else { + filter_size = QLC_83XX_LB_MAX_FILTERS; + adapter->fhash.fbucket_size = QLC_83XX_LB_BUCKET_SIZE; + } + + head = kcalloc(adapter->fhash.fbucket_size, + sizeof(struct hlist_head), GFP_KERNEL); + if (!head) return; - adapter->fhash.fmax = QLCNIC_LB_MAX_FILTERS; + adapter->fhash.fmax = (filter_size / act_pci_func); adapter->fhash.fhead = head; - for (i = 0; i < adapter->fhash.fmax; i++) + netdev_info(netdev, "active nic func = %d, mac filter size=%d\n", + act_pci_func, adapter->fhash.fmax); + + for (i = 0; i < adapter->fhash.fbucket_size; i++) INIT_HLIST_HEAD(&adapter->fhash.fhead[i]); } @@ -2030,6 +2151,9 @@ static int qlcnic_check_temp(struct qlcnic_adapter *adapter) u32 temp_state, temp_val, temp = 0; int rv = 0; + if (qlcnic_83xx_check(adapter)) + temp = QLCRDX(adapter->ahw, QLC_83XX_ASIC_TEMP); + if (qlcnic_82xx_check(adapter)) temp = QLC_SHARED_REG_RD32(adapter, QLCNIC_ASIC_TEMP); @@ -2167,6 +2291,14 @@ static irqreturn_t qlcnic_msix_intr(int irq, void *data) return IRQ_HANDLED; } +static irqreturn_t qlcnic_msix_tx_intr(int irq, void *data) +{ + struct qlcnic_host_tx_ring *tx_ring = data; + + napi_schedule(&tx_ring->napi); + return IRQ_HANDLED; +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void qlcnic_poll_controller(struct net_device *netdev) { @@ -2592,25 +2724,22 @@ void qlcnic_82xx_dev_request_reset(struct qlcnic_adapter *adapter, u32 key) dev_info(&adapter->pdev->dev, "Pause control frames disabled" " on all ports\n"); adapter->need_fw_reset = 1; + if (qlcnic_api_lock(adapter)) return; - state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); - if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD)) { - netdev_err(adapter->netdev, - "Device is in FAILED state, Please Reboot\n"); - qlcnic_api_unlock(adapter); - return; - } + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); if (state == QLCNIC_DEV_READY) { - QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_NEED_RESET); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, + QLCNIC_DEV_NEED_RESET); adapter->flags |= QLCNIC_FW_RESET_OWNER; QLCDB(adapter, DRV, "NEED_RESET state set\n"); qlcnic_idc_debug_info(adapter, 0); } - QLCWR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE, QLCNIC_DEV_NPAR_NON_OPER); + QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE, + QLCNIC_DEV_NPAR_NON_OPER); qlcnic_api_unlock(adapter); } @@ -2628,28 +2757,15 @@ qlcnic_dev_set_npar_ready(struct qlcnic_adapter *adapter) qlcnic_api_unlock(adapter); } -static void -qlcnic_schedule_work(struct qlcnic_adapter *adapter, - work_func_t func, int delay) +void qlcnic_schedule_work(struct qlcnic_adapter *adapter, + work_func_t func, int delay) { if (test_bit(__QLCNIC_AER, &adapter->state)) return; INIT_DELAYED_WORK(&adapter->fw_work, func); - queue_delayed_work(qlcnic_wq, &adapter->fw_work, - round_jiffies_relative(delay)); -} - -static void -qlcnic_cancel_fw_work(struct qlcnic_adapter *adapter) -{ - while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) - msleep(10); - - if (!adapter->fw_work.work.func) - return; - - cancel_delayed_work_sync(&adapter->fw_work); + queue_delayed_work(adapter->qlcnic_wq, &adapter->fw_work, + round_jiffies_relative(delay)); } static void @@ -2788,6 +2904,19 @@ reschedule: qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY); } +struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus, + unsigned int devfn) +{ + struct pci_dev *dev = NULL; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + if (pci_domain_nr(dev->bus) == domain && + (dev->bus->number == bus && dev->devfn == devfn)) + return dev; + } + return NULL; +} + static int qlcnic_is_first_func(struct pci_dev *pdev) { struct pci_dev *oth_pdev; @@ -2839,12 +2968,25 @@ static int qlcnic_attach_func(struct pci_dev *pdev) } qlcnic_api_unlock(adapter); - err = adapter->nic_ops->start_firmware(adapter); + err = qlcnic_start_firmware(adapter); if (err) return err; qlcnic_clr_drv_state(adapter); - qlcnic_setup_intr(adapter, 0); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + err = qlcnic_setup_intr(adapter, 0); + + if (qlcnic_83xx_check(adapter)) { + err = qlcnic_83xx_setup_mbx_intr(adapter); + if (err) { + dev_err(&adapter->pdev->dev, + "failed to setup mbx interrupt\n"); + qlcnic_clr_all_drv_state(adapter, 1); + clear_bit(__QLCNIC_AER, &adapter->state); + goto done; + } + } if (netif_running(netdev)) { err = qlcnic_attach(adapter); @@ -2886,6 +3028,12 @@ static pci_ers_result_t qlcnic_io_error_detected(struct pci_dev *pdev, if (netif_running(netdev)) qlcnic_down(adapter, netdev); + if (qlcnic_83xx_check(adapter)) { + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_config_intrpt(adapter, 0); + qlcnic_83xx_free_mbx_intr(adapter); + } + qlcnic_detach(adapter); qlcnic_teardown_intr(adapter); @@ -2962,21 +3110,34 @@ int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val) int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data) { + int err; struct net_device *netdev = adapter->netdev; - int err = 0; - - if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) - return -EBUSY; + rtnl_lock(); netif_device_detach(netdev); if (netif_running(netdev)) __qlcnic_down(adapter, netdev); + + if (qlcnic_83xx_check(adapter)) { + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_config_intrpt(adapter, 0); + qlcnic_83xx_free_mbx_intr(adapter); + } + qlcnic_detach(adapter); qlcnic_teardown_intr(adapter); + err = adapter->ahw->hw_ops->setup_intr(adapter, data); + if (err) + dev_err(&adapter->pdev->dev, + "failed setting max_rss; rss disabled\n"); - if (qlcnic_enable_msix(adapter, data)) { - netdev_info(netdev, "failed setting max_rss; rss disabled\n"); - qlcnic_enable_msi_legacy(adapter); + if (qlcnic_83xx_check(adapter)) { + err = qlcnic_83xx_setup_mbx_intr(adapter); + if (err) { + dev_err(&adapter->pdev->dev, + "failed to setup mbx interrupt\n"); + goto done; + } } if (netif_running(netdev)) { @@ -2991,6 +3152,7 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data) done: netif_device_attach(netdev); clear_bit(__QLCNIC_RESETTING, &adapter->state); + rtnl_unlock(); return err; } @@ -3108,9 +3270,11 @@ recheck: switch (event) { case NETDEV_UP: qlcnic_config_ipaddr(adapter, ifa->ifa_address, QLCNIC_IP_UP); + break; case NETDEV_DOWN: qlcnic_config_ipaddr(adapter, ifa->ifa_address, QLCNIC_IP_DOWN); + break; default: break; @@ -3158,12 +3322,6 @@ static int __init qlcnic_init_module(void) printk(KERN_INFO "%s\n", qlcnic_driver_string); - qlcnic_wq = create_singlethread_workqueue("qlcnic"); - if (qlcnic_wq == NULL) { - printk(KERN_ERR "qlcnic: cannot create workqueue\n"); - return -ENOMEM; - } - #ifdef CONFIG_INET register_netdevice_notifier(&qlcnic_netdev_cb); register_inetaddr_notifier(&qlcnic_inetaddr_cb); @@ -3175,7 +3333,6 @@ static int __init qlcnic_init_module(void) unregister_inetaddr_notifier(&qlcnic_inetaddr_cb); unregister_netdevice_notifier(&qlcnic_netdev_cb); #endif - destroy_workqueue(qlcnic_wq); } return ret; @@ -3185,14 +3342,12 @@ module_init(qlcnic_init_module); static void __exit qlcnic_exit_module(void) { - pci_unregister_driver(&qlcnic_driver); #ifdef CONFIG_INET unregister_inetaddr_notifier(&qlcnic_inetaddr_cb); unregister_netdevice_notifier(&qlcnic_netdev_cb); #endif - destroy_workqueue(qlcnic_wq); } module_exit(qlcnic_exit_module); -- cgit v0.10.2 From 319ecf121e1da3d75dd1bde32fed255532e61797 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:22 +0000 Subject: qlcnic: 83xx sysfs routines Add 83xx sysfs interface routines Update 82xx sysfs interface routines Signed-off-by: Anirban Chakraborty Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index dd9be4f..6d51c24 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1429,8 +1429,8 @@ int qlcnic_reset_context(struct qlcnic_adapter *); void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings); int qlcnic_diag_alloc_res(struct net_device *netdev, int test); netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev); -int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data); -int qlcnic_validate_max_rss(struct net_device *netdev, u8, u8); +int qlcnic_set_max_rss(struct qlcnic_adapter *, u8, size_t); +int qlcnic_validate_max_rss(u8, u8); void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter); int qlcnic_enable_msix(struct qlcnic_adapter *, u32); @@ -1468,6 +1468,13 @@ void qlcnic_set_vlan_config(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); void qlcnic_set_eswitch_port_features(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); +void __qlcnic_down(struct qlcnic_adapter *, struct net_device *); +void qlcnic_detach(struct qlcnic_adapter *); +void qlcnic_teardown_intr(struct qlcnic_adapter *); +int qlcnic_attach(struct qlcnic_adapter *); +int __qlcnic_up(struct qlcnic_adapter *, struct net_device *); +void qlcnic_restore_indev_addr(struct net_device *, unsigned long); + /* * QLOGIC Board information diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index b2b024c..6d4d792 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -242,6 +242,8 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { .get_func_no = qlcnic_83xx_get_func_no, .api_lock = qlcnic_83xx_cam_lock, .api_unlock = qlcnic_83xx_cam_unlock, + .add_sysfs = qlcnic_83xx_add_sysfs, + .remove_sysfs = qlcnic_83xx_remove_sysfs, .process_lb_rcv_ring_diag = qlcnic_83xx_process_rcv_ring_diag, .create_rx_ctx = qlcnic_83xx_create_rx_ctx, .create_tx_ctx = qlcnic_83xx_create_tx_ctx, @@ -1154,6 +1156,64 @@ out: return err; } +int qlcnic_83xx_config_led(struct qlcnic_adapter *adapter, u32 state, + u32 beacon) +{ + struct qlcnic_cmd_args cmd; + u32 mbx_in; + int i, status = 0; + + if (state) { + /* Get LED configuration */ + qlcnic_alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_GET_LED_CONFIG); + status = qlcnic_issue_cmd(adapter, &cmd); + if (status) { + dev_err(&adapter->pdev->dev, + "Get led config failed.\n"); + goto mbx_err; + } else { + for (i = 0; i < 4; i++) + adapter->ahw->mbox_reg[i] = cmd.rsp.arg[i+1]; + } + qlcnic_free_mbx_args(&cmd); + /* Set LED Configuration */ + mbx_in = (LSW(QLC_83XX_LED_CONFIG) << 16) | + LSW(QLC_83XX_LED_CONFIG); + qlcnic_alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_SET_LED_CONFIG); + cmd.req.arg[1] = mbx_in; + cmd.req.arg[2] = mbx_in; + cmd.req.arg[3] = mbx_in; + if (beacon) + cmd.req.arg[4] = QLC_83XX_ENABLE_BEACON; + status = qlcnic_issue_cmd(adapter, &cmd); + if (status) { + dev_err(&adapter->pdev->dev, + "Set led config failed.\n"); + } +mbx_err: + qlcnic_free_mbx_args(&cmd); + return status; + + } else { + /* Restoring default LED configuration */ + qlcnic_alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_SET_LED_CONFIG); + cmd.req.arg[1] = adapter->ahw->mbox_reg[0]; + cmd.req.arg[2] = adapter->ahw->mbox_reg[1]; + cmd.req.arg[3] = adapter->ahw->mbox_reg[2]; + if (beacon) + cmd.req.arg[4] = adapter->ahw->mbox_reg[3]; + status = qlcnic_issue_cmd(adapter, &cmd); + if (status) + dev_err(&adapter->pdev->dev, + "Restoring led config failed.\n"); + qlcnic_free_mbx_args(&cmd); + return status; + } +} + void qlcnic_83xx_register_nic_idc_func(struct qlcnic_adapter *adapter, int enable) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 51775e4..7af5a46 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -189,6 +189,8 @@ void qlcnic_83xx_get_func_no(struct qlcnic_adapter *); int qlcnic_83xx_cam_lock(struct qlcnic_adapter *); void qlcnic_83xx_cam_unlock(struct qlcnic_adapter *); int qlcnic_send_ctrl_op(struct qlcnic_adapter *, struct qlcnic_cmd_args *, u32); +void qlcnic_83xx_add_sysfs(struct qlcnic_adapter *); +void qlcnic_83xx_remove_sysfs(struct qlcnic_adapter *); void qlcnic_83xx_write_crb(struct qlcnic_adapter *, char *, loff_t, size_t); void qlcnic_83xx_read_crb(struct qlcnic_adapter *, char *, loff_t, size_t); int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *, ulong); @@ -209,6 +211,7 @@ int qlcnic_83xx_napi_add(struct qlcnic_adapter *, struct net_device *); void qlcnic_83xx_napi_del(struct qlcnic_adapter *); void qlcnic_83xx_napi_enable(struct qlcnic_adapter *); void qlcnic_83xx_napi_disable(struct qlcnic_adapter *); +int qlcnic_83xx_config_led(struct qlcnic_adapter *, u32, u32); void qlcnic_ind_wr(struct qlcnic_adapter *, u32, u32); int qlcnic_ind_rd(struct qlcnic_adapter *, u32); void qlcnic_83xx_get_stats(struct qlcnic_adapter *, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 064f36b..920e33d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -529,11 +529,11 @@ static int qlcnic_set_channels(struct net_device *dev, channel->tx_count != channel->max_tx) return -EINVAL; - err = qlcnic_validate_max_rss(dev, channel->max_rx, channel->rx_count); + err = qlcnic_validate_max_rss(channel->max_rx, channel->rx_count); if (err) return err; - err = qlcnic_set_max_rss(adapter, channel->rx_count); + err = qlcnic_set_max_rss(adapter, channel->rx_count, 0); netdev_info(dev, "allocated 0x%x sds rings\n", adapter->max_sds_rings); return err; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 2e69ff8..4a05dc0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -82,7 +82,6 @@ static irqreturn_t qlcnic_msix_intr(int irq, void *data); static irqreturn_t qlcnic_msix_tx_intr(int irq, void *data); static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev); -static void qlcnic_restore_indev_addr(struct net_device *dev, unsigned long); static int qlcnic_start_firmware(struct qlcnic_adapter *); static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter); @@ -181,6 +180,7 @@ static const struct qlcnic_board_info qlcnic_boards[] = { }; #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards) +#define QLC_MAX_SDS_RINGS 8 static const struct qlcnic_legacy_intr_set legacy_intr[] = QLCNIC_LEGACY_INTR_CONFIG; @@ -451,8 +451,7 @@ int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) return 0; } -static void -qlcnic_teardown_intr(struct qlcnic_adapter *adapter) +void qlcnic_teardown_intr(struct qlcnic_adapter *adapter) { if (adapter->flags & QLCNIC_MSIX_ENABLED) pci_disable_msix(adapter->pdev); @@ -1244,8 +1243,7 @@ qlcnic_free_irq(struct qlcnic_adapter *adapter) } } -static int -__qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) +int __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) { int ring; u32 capab2; @@ -1310,8 +1308,7 @@ static int qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) return err; } -static void -__qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) +void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) { if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) return; @@ -1353,7 +1350,7 @@ qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) } -static int +int qlcnic_attach(struct qlcnic_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -1399,8 +1396,7 @@ err_out_napi_del: return err; } -static void -qlcnic_detach(struct qlcnic_adapter *adapter) +void qlcnic_detach(struct qlcnic_adapter *adapter) { if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) return; @@ -2055,14 +2051,8 @@ done: static int qlcnic_open(struct net_device *netdev) { struct qlcnic_adapter *adapter = netdev_priv(netdev); - u32 state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); int err; - if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD)) { - netdev_err(netdev, "Device in FAILED state\n"); - return -EIO; - } - netif_carrier_off(netdev); err = qlcnic_attach(adapter); @@ -3092,33 +3082,38 @@ qlcnicvf_start_firmware(struct qlcnic_adapter *adapter) return err; } -int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val) +int qlcnic_validate_max_rss(u8 max_hw, u8 val) { - if (!qlcnic_use_msi_x && !qlcnic_use_msi) { - netdev_info(netdev, "no msix or msi support, hence no rss\n"); - return -EINVAL; + u32 max_allowed; + + if (max_hw > QLC_MAX_SDS_RINGS) { + max_hw = QLC_MAX_SDS_RINGS; + pr_info("max rss reset to %d\n", QLC_MAX_SDS_RINGS); } - if ((val > max_hw) || (val < 2) || !is_power_of_2(val)) { - netdev_info(netdev, "rss_ring valid range [2 - %x] in " - " powers of 2\n", max_hw); + max_allowed = rounddown_pow_of_two(min_t(int, max_hw, + num_online_cpus())); + if ((val > max_allowed) || (val < 2) || !is_power_of_2(val)) { + pr_info("rss_ring valid range [2 - %x] in powers of 2\n", + max_allowed); return -EINVAL; } return 0; - } -int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data) +int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data, size_t len) { int err; struct net_device *netdev = adapter->netdev; - rtnl_lock(); + if (test_bit(__QLCNIC_RESETTING, &adapter->state)) + return -EBUSY; + netif_device_detach(netdev); if (netif_running(netdev)) __qlcnic_down(adapter, netdev); - if (qlcnic_83xx_check(adapter)) { + if (qlcnic_82xx_check(adapter)) { if (adapter->flags & QLCNIC_MSIX_ENABLED) qlcnic_83xx_config_intrpt(adapter, 0); qlcnic_83xx_free_mbx_intr(adapter); @@ -3126,7 +3121,7 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data) qlcnic_detach(adapter); qlcnic_teardown_intr(adapter); - err = adapter->ahw->hw_ops->setup_intr(adapter, data); + err = qlcnic_setup_intr(adapter, data); if (err) dev_err(&adapter->pdev->dev, "failed setting max_rss; rss disabled\n"); @@ -3149,10 +3144,10 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data) goto done; qlcnic_restore_indev_addr(netdev, NETDEV_UP); } + err = len; done: netif_device_attach(netdev); clear_bit(__QLCNIC_RESETTING, &adapter->state); - rtnl_unlock(); return err; } @@ -3188,8 +3183,7 @@ qlcnic_config_indev_addr(struct qlcnic_adapter *adapter, in_dev_put(indev); } -static void -qlcnic_restore_indev_addr(struct net_device *netdev, unsigned long event) +void qlcnic_restore_indev_addr(struct net_device *netdev, unsigned long event) { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct net_device *dev; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index eeefc73..5045063 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -3,6 +3,7 @@ #include #include "qlcnic.h" +#include "qlcnic_hw.h" #include #include @@ -13,6 +14,10 @@ #include #include +#include + +#define QLC_STATUS_UNSUPPORTED_CMD -2 + int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable) { return -EOPNOTSUPP; @@ -40,7 +45,7 @@ static ssize_t qlcnic_store_bridged_mode(struct device *dev, if (strict_strtoul(buf, 2, &new)) goto err_out; - if (!adapter->nic_ops->config_bridged_mode(adapter, !!new)) + if (!qlcnic_config_bridged_mode(adapter, !!new)) ret = len; err_out: @@ -80,9 +85,7 @@ static ssize_t qlcnic_show_diag_mode(struct device *dev, struct device_attribute *attr, char *buf) { struct qlcnic_adapter *adapter = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", - !!(adapter->flags & QLCNIC_DIAG_ENABLED)); + return sprintf(buf, "%d\n", !!(adapter->flags & QLCNIC_DIAG_ENABLED)); } static int qlcnic_validate_beacon(struct qlcnic_adapter *adapter, u16 beacon, @@ -111,10 +114,11 @@ static ssize_t qlcnic_store_beacon(struct device *dev, const char *buf, size_t len) { struct qlcnic_adapter *adapter = dev_get_drvdata(dev); - int max_sds_rings = adapter->max_sds_rings; + struct qlcnic_hardware_context *ahw = adapter->ahw; + int err, max_sds_rings = adapter->max_sds_rings; u16 beacon; u8 b_state, b_rate; - int err; + unsigned long h_beacon; if (adapter->ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { dev_warn(dev, @@ -122,6 +126,41 @@ static ssize_t qlcnic_store_beacon(struct device *dev, return -EOPNOTSUPP; } + if (qlcnic_83xx_check(adapter) && + !test_bit(__QLCNIC_RESETTING, &adapter->state)) { + if (kstrtoul(buf, 2, &h_beacon)) + return -EINVAL; + + if (ahw->beacon_state == h_beacon) + return len; + + rtnl_lock(); + if (!ahw->beacon_state) { + if (test_and_set_bit(__QLCNIC_LED_ENABLE, + &adapter->state)) { + rtnl_unlock(); + return -EBUSY; + } + } + if (h_beacon) { + err = qlcnic_83xx_config_led(adapter, 1, h_beacon); + if (err) + goto beacon_err; + } else { + err = qlcnic_83xx_config_led(adapter, 0, !h_beacon); + if (err) + goto beacon_err; + } + /* set the current beacon state */ + ahw->beacon_state = h_beacon; +beacon_err: + if (!ahw->beacon_state) + clear_bit(__QLCNIC_LED_ENABLE, &adapter->state); + + rtnl_unlock(); + return len; + } + if (len != sizeof(u16)) return QL_STATUS_INVALID_PARAM; @@ -154,11 +193,10 @@ static ssize_t qlcnic_store_beacon(struct device *dev, } err = qlcnic_config_led(adapter, b_state, b_rate); - - if (!err) { + if (!err) err = len; - adapter->ahw->beacon_state = b_state; - } + else + ahw->beacon_state = b_state; if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state)) qlcnic_diag_free_res(adapter->netdev, max_sds_rings); @@ -207,21 +245,13 @@ static ssize_t qlcnic_sysfs_read_crb(struct file *filp, struct kobject *kobj, { struct device *dev = container_of(kobj, struct device, kobj); struct qlcnic_adapter *adapter = dev_get_drvdata(dev); - u32 data; - u64 qmdata; int ret; ret = qlcnic_sysfs_validate_crb(adapter, offset, size); if (ret != 0) return ret; + qlcnic_read_crb(adapter, buf, offset, size); - if (ADDR_IN_RANGE(offset, QLCNIC_PCI_CAMQM, QLCNIC_PCI_CAMQM_END)) { - qlcnic_pci_camqm_read_2M(adapter, offset, &qmdata); - memcpy(buf, &qmdata, size); - } else { - data = QLCRD32(adapter, offset); - memcpy(buf, &data, size); - } return size; } @@ -231,21 +261,13 @@ static ssize_t qlcnic_sysfs_write_crb(struct file *filp, struct kobject *kobj, { struct device *dev = container_of(kobj, struct device, kobj); struct qlcnic_adapter *adapter = dev_get_drvdata(dev); - u32 data; - u64 qmdata; int ret; ret = qlcnic_sysfs_validate_crb(adapter, offset, size); if (ret != 0) return ret; - if (ADDR_IN_RANGE(offset, QLCNIC_PCI_CAMQM, QLCNIC_PCI_CAMQM_END)) { - memcpy(&qmdata, buf, size); - qlcnic_pci_camqm_write_2M(adapter, offset, qmdata); - } else { - memcpy(&data, buf, size); - QLCWR32(adapter, offset, data); - } + qlcnic_write_crb(adapter, buf, offset, size); return size; } @@ -303,33 +325,44 @@ static ssize_t qlcnic_sysfs_write_mem(struct file *filp, struct kobject *kobj, return size; } +static int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func) +{ + int i; + for (i = 0; i < adapter->ahw->act_pci_func; i++) { + if (adapter->npars[i].pci_func == pci_func) + return i; + } + + return -1; +} + static int validate_pm_config(struct qlcnic_adapter *adapter, struct qlcnic_pm_func_cfg *pm_cfg, int count) { - u8 src_pci_func, s_esw_id, d_esw_id, dest_pci_func; - int i; + u8 src_pci_func, s_esw_id, d_esw_id; + u8 dest_pci_func; + int i, src_index, dest_index; for (i = 0; i < count; i++) { src_pci_func = pm_cfg[i].pci_func; dest_pci_func = pm_cfg[i].dest_npar; - if (src_pci_func >= QLCNIC_MAX_PCI_FUNC || - dest_pci_func >= QLCNIC_MAX_PCI_FUNC) - return QL_STATUS_INVALID_PARAM; + src_index = qlcnic_is_valid_nic_func(adapter, src_pci_func); - if (adapter->npars[src_pci_func].type != QLCNIC_TYPE_NIC) + if (src_index < 0) return QL_STATUS_INVALID_PARAM; - if (adapter->npars[dest_pci_func].type != QLCNIC_TYPE_NIC) + dest_index = qlcnic_is_valid_nic_func(adapter, dest_pci_func); + if (dest_index < 0) return QL_STATUS_INVALID_PARAM; - s_esw_id = adapter->npars[src_pci_func].phy_port; - d_esw_id = adapter->npars[dest_pci_func].phy_port; + s_esw_id = adapter->npars[src_index].phy_port; + d_esw_id = adapter->npars[dest_index].phy_port; if (s_esw_id != d_esw_id) return QL_STATUS_INVALID_PARAM; } - return 0; + return 0; } static ssize_t qlcnic_sysfs_write_pm_config(struct file *filp, @@ -342,7 +375,7 @@ static ssize_t qlcnic_sysfs_write_pm_config(struct file *filp, struct qlcnic_adapter *adapter = dev_get_drvdata(dev); struct qlcnic_pm_func_cfg *pm_cfg; u32 id, action, pci_func; - int count, rem, i, ret; + int count, rem, i, ret, index; count = size / sizeof(struct qlcnic_pm_func_cfg); rem = size % sizeof(struct qlcnic_pm_func_cfg); @@ -350,26 +383,32 @@ static ssize_t qlcnic_sysfs_write_pm_config(struct file *filp, return QL_STATUS_INVALID_PARAM; pm_cfg = (struct qlcnic_pm_func_cfg *)buf; - ret = validate_pm_config(adapter, pm_cfg, count); + if (ret) return ret; for (i = 0; i < count; i++) { pci_func = pm_cfg[i].pci_func; action = !!pm_cfg[i].action; - id = adapter->npars[pci_func].phy_port; - ret = qlcnic_config_port_mirroring(adapter, id, action, - pci_func); + index = qlcnic_is_valid_nic_func(adapter, pci_func); + if (index < 0) + return QL_STATUS_INVALID_PARAM; + + id = adapter->npars[index].phy_port; + ret = qlcnic_config_port_mirroring(adapter, id, + action, pci_func); if (ret) return ret; } for (i = 0; i < count; i++) { pci_func = pm_cfg[i].pci_func; - id = adapter->npars[pci_func].phy_port; - adapter->npars[pci_func].enable_pm = !!pm_cfg[i].action; - adapter->npars[pci_func].dest_npar = id; + index = qlcnic_is_valid_nic_func(adapter, pci_func); + id = adapter->npars[index].phy_port; + adapter->npars[index].enable_pm = !!pm_cfg[i].action; + adapter->npars[index].dest_npar = id; } + return size; } @@ -383,16 +422,19 @@ static ssize_t qlcnic_sysfs_read_pm_config(struct file *filp, struct qlcnic_adapter *adapter = dev_get_drvdata(dev); struct qlcnic_pm_func_cfg pm_cfg[QLCNIC_MAX_PCI_FUNC]; int i; + u8 pci_func; if (size != sizeof(pm_cfg)) return QL_STATUS_INVALID_PARAM; - for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { - if (adapter->npars[i].type != QLCNIC_TYPE_NIC) - continue; - pm_cfg[i].action = adapter->npars[i].enable_pm; - pm_cfg[i].dest_npar = 0; - pm_cfg[i].pci_func = i; + memset(&pm_cfg, 0, + sizeof(struct qlcnic_pm_func_cfg) * QLCNIC_MAX_PCI_FUNC); + + for (i = 0; i < adapter->ahw->act_pci_func; i++) { + pci_func = adapter->npars[i].pci_func; + pm_cfg[pci_func].action = adapter->npars[i].enable_pm; + pm_cfg[pci_func].dest_npar = 0; + pm_cfg[pci_func].pci_func = i; } memcpy(buf, &pm_cfg, size); @@ -404,24 +446,33 @@ static int validate_esw_config(struct qlcnic_adapter *adapter, { u32 op_mode; u8 pci_func; - int i; + int i, ret; - op_mode = readl(adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE); + if (qlcnic_82xx_check(adapter)) + op_mode = readl(adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE); + else + op_mode = QLCRDX(adapter->ahw, QLC_83XX_DRV_OP_MODE); for (i = 0; i < count; i++) { pci_func = esw_cfg[i].pci_func; if (pci_func >= QLCNIC_MAX_PCI_FUNC) return QL_STATUS_INVALID_PARAM; - if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC) { - if (adapter->npars[pci_func].type != QLCNIC_TYPE_NIC) + if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC) + if (qlcnic_is_valid_nic_func(adapter, pci_func) < 0) return QL_STATUS_INVALID_PARAM; - } switch (esw_cfg[i].op_mode) { case QLCNIC_PORT_DEFAULTS: - if (QLC_DEV_GET_DRV(op_mode, pci_func) != - QLCNIC_NON_PRIV_FUNC) { + if (qlcnic_82xx_check(adapter)) { + ret = QLC_DEV_GET_DRV(op_mode, pci_func); + } else { + ret = QLC_83XX_GET_FUNC_PRIVILEGE(op_mode, + pci_func); + esw_cfg[i].offload_flags = 0; + } + + if (ret != QLCNIC_NON_PRIV_FUNC) { if (esw_cfg[i].mac_anti_spoof != 0) return QL_STATUS_INVALID_PARAM; if (esw_cfg[i].mac_override != 1) @@ -444,6 +495,7 @@ static int validate_esw_config(struct qlcnic_adapter *adapter, return QL_STATUS_INVALID_PARAM; } } + return 0; } @@ -458,7 +510,8 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file, struct qlcnic_esw_func_cfg *esw_cfg; struct qlcnic_npar_info *npar; int count, rem, i, ret; - u8 pci_func, op_mode = 0; + int index; + u8 op_mode = 0, pci_func; count = size / sizeof(struct qlcnic_esw_func_cfg); rem = size % sizeof(struct qlcnic_esw_func_cfg); @@ -471,10 +524,9 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file, return ret; for (i = 0; i < count; i++) { - if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC) { + if (adapter->ahw->op_mode == QLCNIC_MGMT_FUNC) if (qlcnic_config_switch_port(adapter, &esw_cfg[i])) return QL_STATUS_INVALID_PARAM; - } if (adapter->ahw->pci_func != esw_cfg[i].pci_func) continue; @@ -503,7 +555,8 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file, for (i = 0; i < count; i++) { pci_func = esw_cfg[i].pci_func; - npar = &adapter->npars[pci_func]; + index = qlcnic_is_valid_nic_func(adapter, pci_func); + npar = &adapter->npars[index]; switch (esw_cfg[i].op_mode) { case QLCNIC_PORT_DEFAULTS: npar->promisc_mode = esw_cfg[i].promisc_mode; @@ -533,18 +586,21 @@ static ssize_t qlcnic_sysfs_read_esw_config(struct file *file, struct device *dev = container_of(kobj, struct device, kobj); struct qlcnic_adapter *adapter = dev_get_drvdata(dev); struct qlcnic_esw_func_cfg esw_cfg[QLCNIC_MAX_PCI_FUNC]; - u8 i; + u8 i, pci_func; if (size != sizeof(esw_cfg)) return QL_STATUS_INVALID_PARAM; - for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { - if (adapter->npars[i].type != QLCNIC_TYPE_NIC) - continue; - esw_cfg[i].pci_func = i; - if (qlcnic_get_eswitch_port_config(adapter, &esw_cfg[i])) + memset(&esw_cfg, 0, + sizeof(struct qlcnic_esw_func_cfg) * QLCNIC_MAX_PCI_FUNC); + + for (i = 0; i < adapter->ahw->act_pci_func; i++) { + pci_func = adapter->npars[i].pci_func; + esw_cfg[pci_func].pci_func = pci_func; + if (qlcnic_get_eswitch_port_config(adapter, &esw_cfg[pci_func])) return QL_STATUS_INVALID_PARAM; } + memcpy(buf, &esw_cfg, size); return size; @@ -558,10 +614,7 @@ static int validate_npar_config(struct qlcnic_adapter *adapter, for (i = 0; i < count; i++) { pci_func = np_cfg[i].pci_func; - if (pci_func >= QLCNIC_MAX_PCI_FUNC) - return QL_STATUS_INVALID_PARAM; - - if (adapter->npars[pci_func].type != QLCNIC_TYPE_NIC) + if (qlcnic_is_valid_nic_func(adapter, pci_func) < 0) return QL_STATUS_INVALID_PARAM; if (!IS_VALID_BW(np_cfg[i].min_bw) || @@ -581,7 +634,7 @@ static ssize_t qlcnic_sysfs_write_npar_config(struct file *file, struct qlcnic_adapter *adapter = dev_get_drvdata(dev); struct qlcnic_info nic_info; struct qlcnic_npar_func_cfg *np_cfg; - int i, count, rem, ret; + int i, count, rem, ret, index; u8 pci_func; count = size / sizeof(struct qlcnic_npar_func_cfg); @@ -594,8 +647,10 @@ static ssize_t qlcnic_sysfs_write_npar_config(struct file *file, if (ret) return ret; - for (i = 0; i < count ; i++) { + for (i = 0; i < count; i++) { pci_func = np_cfg[i].pci_func; + + memset(&nic_info, 0, sizeof(struct qlcnic_info)); ret = qlcnic_get_nic_info(adapter, &nic_info, pci_func); if (ret) return ret; @@ -605,12 +660,12 @@ static ssize_t qlcnic_sysfs_write_npar_config(struct file *file, ret = qlcnic_set_nic_info(adapter, &nic_info); if (ret) return ret; - adapter->npars[i].min_bw = nic_info.min_tx_bw; - adapter->npars[i].max_bw = nic_info.max_tx_bw; + index = qlcnic_is_valid_nic_func(adapter, pci_func); + adapter->npars[index].min_bw = nic_info.min_tx_bw; + adapter->npars[index].max_bw = nic_info.max_tx_bw; } return size; - } static ssize_t qlcnic_sysfs_read_npar_config(struct file *file, @@ -628,8 +683,12 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file, if (size != sizeof(np_cfg)) return QL_STATUS_INVALID_PARAM; + memset(&nic_info, 0, sizeof(struct qlcnic_info)); + memset(&np_cfg, 0, + sizeof(struct qlcnic_npar_func_cfg) * QLCNIC_MAX_PCI_FUNC); + for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { - if (adapter->npars[i].type != QLCNIC_TYPE_NIC) + if (qlcnic_is_valid_nic_func(adapter, i) < 0) continue; ret = qlcnic_get_nic_info(adapter, &nic_info, i); if (ret) @@ -644,6 +703,7 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file, np_cfg[i].max_tx_queues = nic_info.max_tx_ques; np_cfg[i].max_rx_queues = nic_info.max_rx_ques; } + memcpy(buf, &np_cfg, size); return size; } @@ -659,6 +719,9 @@ static ssize_t qlcnic_sysfs_get_port_stats(struct file *file, struct qlcnic_esw_statistics port_stats; int ret; + if (qlcnic_83xx_check(adapter)) + return QLC_STATUS_UNSUPPORTED_CMD; + if (size != sizeof(struct qlcnic_esw_statistics)) return QL_STATUS_INVALID_PARAM; @@ -691,6 +754,9 @@ static ssize_t qlcnic_sysfs_get_esw_stats(struct file *file, struct qlcnic_esw_statistics esw_stats; int ret; + if (qlcnic_83xx_check(adapter)) + return QLC_STATUS_UNSUPPORTED_CMD; + if (size != sizeof(struct qlcnic_esw_statistics)) return QL_STATUS_INVALID_PARAM; @@ -722,6 +788,9 @@ static ssize_t qlcnic_sysfs_clear_esw_stats(struct file *file, struct qlcnic_adapter *adapter = dev_get_drvdata(dev); int ret; + if (qlcnic_83xx_check(adapter)) + return QLC_STATUS_UNSUPPORTED_CMD; + if (offset >= QLCNIC_NIU_MAX_XG_PORTS) return QL_STATUS_INVALID_PARAM; @@ -744,10 +813,14 @@ static ssize_t qlcnic_sysfs_clear_port_stats(struct file *file, char *buf, loff_t offset, size_t size) { + struct device *dev = container_of(kobj, struct device, kobj); struct qlcnic_adapter *adapter = dev_get_drvdata(dev); int ret; + if (qlcnic_83xx_check(adapter)) + return QLC_STATUS_UNSUPPORTED_CMD; + if (offset >= QLCNIC_MAX_PCI_FUNC) return QL_STATUS_INVALID_PARAM; @@ -789,7 +862,10 @@ static ssize_t qlcnic_sysfs_read_pci_config(struct file *file, return ret; } - for (i = 0; i < QLCNIC_MAX_PCI_FUNC ; i++) { + memset(&pci_cfg, 0, + sizeof(struct qlcnic_pci_func_cfg) * QLCNIC_MAX_PCI_FUNC); + + for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { pci_cfg[i].pci_func = pci_info[i].id; pci_cfg[i].func_type = pci_info[i].type; pci_cfg[i].port_num = pci_info[i].default_port; @@ -797,6 +873,7 @@ static ssize_t qlcnic_sysfs_read_pci_config(struct file *file, pci_cfg[i].max_bw = pci_info[i].tx_max_bw; memcpy(&pci_cfg[i].def_mac_addr, &pci_info[i].mac, ETH_ALEN); } + memcpy(buf, &pci_cfg, size); kfree(pci_info); return size; @@ -897,7 +974,6 @@ void qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter) void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; - u32 state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); if (device_create_bin_file(dev, &bin_attr_port_stats)) dev_info(dev, "failed to create port stats sysfs entry"); @@ -911,9 +987,6 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) if (device_create_bin_file(dev, &bin_attr_mem)) dev_info(dev, "failed to create mem sysfs entry\n"); - if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD)) - return; - if (device_create_bin_file(dev, &bin_attr_pci_config)) dev_info(dev, "failed to create pci config sysfs entry"); if (device_create_file(dev, &dev_attr_beacon)) @@ -936,7 +1009,6 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; - u32 state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); device_remove_bin_file(dev, &bin_attr_port_stats); @@ -945,8 +1017,6 @@ void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) device_remove_file(dev, &dev_attr_diag_mode); device_remove_bin_file(dev, &bin_attr_crb); device_remove_bin_file(dev, &bin_attr_mem); - if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD)) - return; device_remove_bin_file(dev, &bin_attr_pci_config); device_remove_file(dev, &dev_attr_beacon); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) @@ -968,3 +1038,13 @@ void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter) { qlcnic_remove_diag_entries(adapter); } + +void qlcnic_83xx_add_sysfs(struct qlcnic_adapter *adapter) +{ + qlcnic_create_diag_entries(adapter); +} + +void qlcnic_83xx_remove_sysfs(struct qlcnic_adapter *adapter) +{ + qlcnic_remove_diag_entries(adapter); +} -- cgit v0.10.2 From d865ebb479ce6fdba96301845e8f16acb089b424 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:23 +0000 Subject: qlcnic: 83xx adpater flash interface routines 83xx adapter flash memory map, data structures and interface routines Signed-off-by: Himanshu Madhani Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 6d51c24..f0bec7e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -204,6 +204,7 @@ struct uni_data_desc{ /* Flash Defines and Structures */ #define QLCNIC_FLT_LOCATION 0x3F1000 +#define QLCNIC_FDT_LOCATION 0x3F0000 #define QLCNIC_B0_FW_IMAGE_REGION 0x74 #define QLCNIC_C0_FW_IMAGE_REGION 0x97 #define QLCNIC_BOOTLD_REGION 0X72 @@ -224,6 +225,36 @@ struct qlcnic_flt_entry { u32 end_addr; }; +/* Flash Descriptor Table */ +struct qlcnic_fdt { + u32 valid; + u16 ver; + u16 len; + u16 cksum; + u16 unused; + u8 model[16]; + u16 mfg_id; + u16 id; + u8 flag; + u8 erase_cmd; + u8 alt_erase_cmd; + u8 write_enable_cmd; + u8 write_enable_bits; + u8 write_statusreg_cmd; + u8 unprotected_sec_cmd; + u8 read_manuf_cmd; + u32 block_size; + u32 alt_block_size; + u32 flash_size; + u32 write_enable_data; + u8 readid_addr_len; + u8 write_disable_bits; + u8 read_dev_id_len; + u8 chip_erase_cmd; + u16 read_timeo; + u8 protected_sec_cmd; + u8 resvd[65]; +}; /* Magic number to let user know flash is programmed */ #define QLCNIC_BDINFO_MAGIC 0x12345678 @@ -404,6 +435,7 @@ struct qlcnic_hardware_context { struct qlcnic_hardware_ops *hw_ops; struct qlcnic_nic_intr_coalesce coal; struct qlcnic_fw_dump fw_dump; + struct qlcnic_fdt fdt; struct qlcnic_intrpt_config *intr_tbl; u32 *reg_tbl; u32 *ext_reg_tbl; @@ -972,6 +1004,7 @@ struct qlcnic_adapter { u64 dev_rst_time; u8 mac_learn; unsigned long vlans[BITS_TO_LONGS(VLAN_N_VID)]; + u8 flash_mfg_id; struct qlcnic_npar_info *npars; struct qlcnic_eswitch *eswitch; struct qlcnic_nic_template *nic_ops; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 6d4d792..a4a521e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1782,3 +1782,363 @@ out: qlcnic_free_mbx_args(&cmd); return err; } + +int qlcnic_83xx_lock_flash(struct qlcnic_adapter *adapter) +{ + int id, timeout = 0; + u32 status = 0; + + while (status == 0) { + status = QLC_SHARED_REG_RD32(adapter, QLCNIC_FLASH_LOCK); + if (status) + break; + + if (++timeout >= QLC_83XX_FLASH_LOCK_TIMEOUT) { + id = QLC_SHARED_REG_RD32(adapter, + QLCNIC_FLASH_LOCK_OWNER); + dev_err(&adapter->pdev->dev, + "%s: failed, lock held by %d\n", __func__, id); + return -EIO; + } + usleep_range(1000, 2000); + } + + QLC_SHARED_REG_WR32(adapter, QLCNIC_FLASH_LOCK_OWNER, adapter->portnum); + return 0; +} + +void qlcnic_83xx_unlock_flash(struct qlcnic_adapter *adapter) +{ + QLC_SHARED_REG_RD32(adapter, QLCNIC_FLASH_UNLOCK); + QLC_SHARED_REG_WR32(adapter, QLCNIC_FLASH_LOCK_OWNER, 0xFF); +} + +static int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter, + u32 flash_addr, u8 *p_data, + int count) +{ + int i, ret; + u32 word, range, flash_offset, addr = flash_addr; + ulong indirect_add, direct_window; + + flash_offset = addr & (QLCNIC_FLASH_SECTOR_SIZE - 1); + if (addr & 0x3) { + dev_err(&adapter->pdev->dev, "Illegal addr = 0x%x\n", addr); + return -EIO; + } + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_DIRECT_WINDOW, + (addr)); + + range = flash_offset + (count * sizeof(u32)); + /* Check if data is spread across multiple sectors */ + if (range > (QLCNIC_FLASH_SECTOR_SIZE - 1)) { + + /* Multi sector read */ + for (i = 0; i < count; i++) { + indirect_add = QLC_83XX_FLASH_DIRECT_DATA(addr); + ret = qlcnic_83xx_rd_reg_indirect(adapter, + indirect_add); + if (ret == -EIO) + return -EIO; + + word = ret; + *(u32 *)p_data = word; + p_data = p_data + 4; + addr = addr + 4; + flash_offset = flash_offset + 4; + + if (flash_offset > (QLCNIC_FLASH_SECTOR_SIZE - 1)) { + direct_window = QLC_83XX_FLASH_DIRECT_WINDOW; + /* This write is needed once for each sector */ + qlcnic_83xx_wrt_reg_indirect(adapter, + direct_window, + (addr)); + flash_offset = 0; + } + } + } else { + /* Single sector read */ + for (i = 0; i < count; i++) { + indirect_add = QLC_83XX_FLASH_DIRECT_DATA(addr); + ret = qlcnic_83xx_rd_reg_indirect(adapter, + indirect_add); + if (ret == -EIO) + return -EIO; + + word = ret; + *(u32 *)p_data = word; + p_data = p_data + 4; + addr = addr + 4; + } + } + + return 0; +} + +static int qlcnic_83xx_poll_flash_status_reg(struct qlcnic_adapter *adapter) +{ + u32 status; + int retries = QLC_83XX_FLASH_READ_RETRY_COUNT; + + do { + status = qlcnic_83xx_rd_reg_indirect(adapter, + QLC_83XX_FLASH_STATUS); + if ((status & QLC_83XX_FLASH_STATUS_READY) == + QLC_83XX_FLASH_STATUS_READY) + break; + + msleep(QLC_83XX_FLASH_STATUS_REG_POLL_DELAY); + } while (--retries); + + if (!retries) + return -EIO; + + return 0; +} + +static int qlcnic_83xx_enable_flash_write_op(struct qlcnic_adapter *adapter) +{ + int ret; + u32 cmd; + cmd = adapter->ahw->fdt.write_statusreg_cmd; + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + (QLC_83XX_FLASH_FDT_WRITE_DEF_SIG | cmd)); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, + adapter->ahw->fdt.write_enable_bits); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_SECOND_ERASE_MS_VAL); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) + return -EIO; + + return 0; +} + +static int qlcnic_83xx_disable_flash_write_op(struct qlcnic_adapter *adapter) +{ + int ret; + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + (QLC_83XX_FLASH_FDT_WRITE_DEF_SIG | + adapter->ahw->fdt.write_statusreg_cmd)); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, + adapter->ahw->fdt.write_disable_bits); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_SECOND_ERASE_MS_VAL); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) + return -EIO; + + return 0; +} + +int qlcnic_83xx_read_flash_mfg_id(struct qlcnic_adapter *adapter) +{ + int ret, mfg_id; + + if (qlcnic_83xx_lock_flash(adapter)) + return -EIO; + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + QLC_83XX_FLASH_FDT_READ_MFG_ID_VAL); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_READ_CTRL); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + qlcnic_83xx_unlock_flash(adapter); + return -EIO; + } + + mfg_id = qlcnic_83xx_rd_reg_indirect(adapter, QLC_83XX_FLASH_RDDATA); + if (mfg_id == -EIO) + return -EIO; + + adapter->flash_mfg_id = (mfg_id & 0xFF); + qlcnic_83xx_unlock_flash(adapter); + + return 0; +} + +int qlcnic_83xx_read_flash_descriptor_table(struct qlcnic_adapter *adapter) +{ + int count, fdt_size, ret = 0; + + fdt_size = sizeof(struct qlcnic_fdt); + count = fdt_size / sizeof(u32); + + if (qlcnic_83xx_lock_flash(adapter)) + return -EIO; + + memset(&adapter->ahw->fdt, 0, fdt_size); + ret = qlcnic_83xx_lockless_flash_read32(adapter, QLCNIC_FDT_LOCATION, + (u8 *)&adapter->ahw->fdt, + count); + + qlcnic_83xx_unlock_flash(adapter); + return ret; +} + +int qlcnic_83xx_erase_flash_sector(struct qlcnic_adapter *adapter, + u32 sector_start_addr) +{ + u32 reversed_addr, addr1, addr2, cmd; + int ret = -EIO; + + if (qlcnic_83xx_lock_flash(adapter) != 0) + return -EIO; + + if (adapter->ahw->fdt.mfg_id == adapter->flash_mfg_id) { + ret = qlcnic_83xx_enable_flash_write_op(adapter); + if (ret) { + qlcnic_83xx_unlock_flash(adapter); + dev_err(&adapter->pdev->dev, + "%s failed at %d\n", + __func__, __LINE__); + return ret; + } + } + + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + qlcnic_83xx_unlock_flash(adapter); + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return -EIO; + } + + addr1 = (sector_start_addr & 0xFF) << 16; + addr2 = (sector_start_addr & 0xFF0000) >> 16; + reversed_addr = addr1 | addr2; + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, + reversed_addr); + cmd = QLC_83XX_FLASH_FDT_ERASE_DEF_SIG | adapter->ahw->fdt.erase_cmd; + if (adapter->ahw->fdt.mfg_id == adapter->flash_mfg_id) + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, cmd); + else + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + QLC_83XX_FLASH_OEM_ERASE_SIG); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_LAST_ERASE_MS_VAL); + + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + qlcnic_83xx_unlock_flash(adapter); + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return -EIO; + } + + if (adapter->ahw->fdt.mfg_id == adapter->flash_mfg_id) { + ret = qlcnic_83xx_disable_flash_write_op(adapter); + if (ret) { + qlcnic_83xx_unlock_flash(adapter); + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return ret; + } + } + + qlcnic_83xx_unlock_flash(adapter); + + return 0; +} + +int qlcnic_83xx_flash_write32(struct qlcnic_adapter *adapter, u32 addr, + u32 *p_data) +{ + int ret = -EIO; + u32 addr1 = 0x00800000 | (addr >> 2); + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, addr1); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, *p_data); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_LAST_ERASE_MS_VAL); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return -EIO; + } + + return 0; +} + +int qlcnic_83xx_flash_bulk_write(struct qlcnic_adapter *adapter, u32 addr, + u32 *p_data, int count) +{ + u32 temp; + int ret = -EIO; + + if ((count < QLC_83XX_FLASH_BULK_WRITE_MIN) || + (count > QLC_83XX_FLASH_BULK_WRITE_MAX)) { + dev_err(&adapter->pdev->dev, + "%s: Invalid word count\n", __func__); + return -EIO; + } + + temp = qlcnic_83xx_rd_reg_indirect(adapter, + QLC_83XX_FLASH_SPI_CONTROL); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_SPI_CONTROL, + (temp | QLC_83XX_FLASH_SPI_CTRL)); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + QLC_83XX_FLASH_ADDR_TEMP_VAL); + + /* First DWORD write */ + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, *p_data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_FIRST_MS_PATTERN); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return -EIO; + } + + count--; + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + QLC_83XX_FLASH_ADDR_SECOND_TEMP_VAL); + /* Second to N-1 DWORD writes */ + while (count != 1) { + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, + *p_data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_SECOND_MS_PATTERN); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return -EIO; + } + count--; + } + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + QLC_83XX_FLASH_ADDR_TEMP_VAL | + (addr >> 2)); + /* Last DWORD write */ + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA, *p_data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_LAST_MS_PATTERN); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) { + dev_err(&adapter->pdev->dev, + "%s: failed at %d\n", __func__, __LINE__); + return -EIO; + } + + ret = qlcnic_83xx_rd_reg_indirect(adapter, QLC_83XX_FLASH_SPI_STATUS); + if ((ret & QLC_83XX_FLASH_SPI_CTRL) == QLC_83XX_FLASH_SPI_CTRL) { + dev_err(&adapter->pdev->dev, "%s: failed at %d\n", + __func__, __LINE__); + /* Operation failed, clear error bit */ + temp = qlcnic_83xx_rd_reg_indirect(adapter, + QLC_83XX_FLASH_SPI_CONTROL); + qlcnic_83xx_wrt_reg_indirect(adapter, + QLC_83XX_FLASH_SPI_CONTROL, + (temp | QLC_83XX_FLASH_SPI_CTRL)); + } + + return 0; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 7af5a46..4519995 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -134,6 +134,46 @@ struct qlcnic_macvlan_mbx { #define QLC_83XX_DEFAULT_MODE 0x0 #define QLCNIC_BRDTYPE_83XX_10G 0x0083 +#define QLC_83XX_FLASH_SPI_STATUS 0x2808E010 +#define QLC_83XX_FLASH_SPI_CONTROL 0x2808E014 +#define QLC_83XX_FLASH_STATUS 0x42100004 +#define QLC_83XX_FLASH_CONTROL 0x42110004 +#define QLC_83XX_FLASH_ADDR 0x42110008 +#define QLC_83XX_FLASH_WRDATA 0x4211000C +#define QLC_83XX_FLASH_RDDATA 0x42110018 +#define QLC_83XX_FLASH_DIRECT_WINDOW 0x42110030 +#define QLC_83XX_FLASH_DIRECT_DATA(DATA) (0x42150000 | (0x0000FFFF&DATA)) +#define QLC_83XX_FLASH_SECTOR_ERASE_CMD 0xdeadbeef +#define QLC_83XX_FLASH_WRITE_CMD 0xdacdacda +#define QLC_83XX_FLASH_BULK_WRITE_CMD 0xcadcadca +#define QLC_83XX_FLASH_READ_RETRY_COUNT 5000 +#define QLC_83XX_FLASH_STATUS_READY 0x6 +#define QLC_83XX_FLASH_BULK_WRITE_MIN 2 +#define QLC_83XX_FLASH_BULK_WRITE_MAX 64 +#define QLC_83XX_FLASH_STATUS_REG_POLL_DELAY 1 +#define QLC_83XX_ERASE_MODE 1 +#define QLC_83XX_WRITE_MODE 2 +#define QLC_83XX_BULK_WRITE_MODE 3 +#define QLC_83XX_FLASH_FDT_WRITE_DEF_SIG 0xFD0100 +#define QLC_83XX_FLASH_FDT_ERASE_DEF_SIG 0xFD0300 +#define QLC_83XX_FLASH_FDT_READ_MFG_ID_VAL 0xFD009F +#define QLC_83XX_FLASH_OEM_ERASE_SIG 0xFD03D8 +#define QLC_83XX_FLASH_OEM_WRITE_SIG 0xFD0101 +#define QLC_83XX_FLASH_OEM_READ_SIG 0xFD0005 +#define QLC_83XX_FLASH_ADDR_TEMP_VAL 0x00800000 +#define QLC_83XX_FLASH_ADDR_SECOND_TEMP_VAL 0x00800001 +#define QLC_83XX_FLASH_WRDATA_DEF 0x0 +#define QLC_83XX_FLASH_READ_CTRL 0x3F +#define QLC_83XX_FLASH_SPI_CTRL 0x4 +#define QLC_83XX_FLASH_FIRST_ERASE_MS_VAL 0x2 +#define QLC_83XX_FLASH_SECOND_ERASE_MS_VAL 0x5 +#define QLC_83XX_FLASH_LAST_ERASE_MS_VAL 0x3D +#define QLC_83XX_FLASH_FIRST_MS_PATTERN 0x43 +#define QLC_83XX_FLASH_SECOND_MS_PATTERN 0x7F +#define QLC_83XX_FLASH_LAST_MS_PATTERN 0x7D +#define QLC_83xx_FLASH_MAX_WAIT_USEC 100 +#define QLC_83XX_FLASH_LOCK_TIMEOUT 10000 + /* Additional registers in 83xx */ enum qlc_83xx_ext_regs { QLCNIC_GLOBAL_RESET = 0, @@ -253,4 +293,14 @@ void qlcnic_83xx_free_mbx_intr(struct qlcnic_adapter *); void qlcnic_83xx_register_map(struct qlcnic_hardware_context *); void qlcnic_83xx_idc_aen_work(struct work_struct *); void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *, __be32, int); + +int qlcnic_83xx_erase_flash_sector(struct qlcnic_adapter *, u32); +int qlcnic_83xx_flash_bulk_write(struct qlcnic_adapter *, u32, u32 *, int); +int qlcnic_83xx_flash_write32(struct qlcnic_adapter *, u32, u32 *); +int qlcnic_83xx_lock_flash(struct qlcnic_adapter *); +void qlcnic_83xx_unlock_flash(struct qlcnic_adapter *); +int qlcnic_83xx_save_flash_status(struct qlcnic_adapter *); +int qlcnic_83xx_restore_flash_status(struct qlcnic_adapter *, int); +int qlcnic_83xx_read_flash_mfg_id(struct qlcnic_adapter *); +int qlcnic_83xx_read_flash_descriptor_table(struct qlcnic_adapter *); #endif -- cgit v0.10.2 From 629263acaea3613a7da4d602ac1d143533d251cc Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 04:11:55 +0000 Subject: qlcnic: 83xx CNA inter driver communication mechanism Inter Driver Communication (IDC) module. CNA function drivers(ISCSI, FCOE and NIC) which shares the adapter relies on IDC mechanism for gracefull shut down, restart and firmware error recovery. Signed-off-by: Rajesh Borundia Signed-off-by: Sucheta Chakraborty Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/Makefile b/drivers/net/ethernet/qlogic/qlcnic/Makefile index f8d85ae..799325d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/Makefile +++ b/drivers/net/ethernet/qlogic/qlcnic/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_QLCNIC) := qlcnic.o qlcnic-y := qlcnic_hw.o qlcnic_main.o qlcnic_init.o \ qlcnic_ethtool.o qlcnic_ctx.o qlcnic_io.o \ - qlcnic_sysfs.o qlcnic_minidump.o qlcnic_83xx_hw.o + qlcnic_sysfs.o qlcnic_minidump.o qlcnic_83xx_hw.o \ + qlcnic_83xx_init.o diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index f0bec7e..9a6d093 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -299,6 +299,12 @@ struct qlcnic_fdt { extern char qlcnic_driver_name[]; +extern int qlcnic_use_msi; +extern int qlcnic_use_msi_x; +extern int qlcnic_auto_fw_reset; +extern int qlcnic_load_fw_file; +extern int qlcnic_config_npars; + /* Number of status descriptors to handle per interrupt */ #define MAX_STATUS_HANDLE (64) @@ -436,6 +442,8 @@ struct qlcnic_hardware_context { struct qlcnic_nic_intr_coalesce coal; struct qlcnic_fw_dump fw_dump; struct qlcnic_fdt fdt; + struct qlc_83xx_idc idc; + struct qlc_83xx_fw_info fw_info; struct qlcnic_intrpt_config *intr_tbl; u32 *reg_tbl; u32 *ext_reg_tbl; @@ -947,6 +955,7 @@ struct qlcnic_ipaddr { #define QLCNIC_TEST_IN_PROGRESS 52 #define QLCNIC_UNDEFINED_ERROR 53 #define QLCNIC_LB_CABLE_NOT_CONN 54 +#define QLCNIC_ILB_MAX_RCV_LOOP 10 struct qlcnic_filter { struct hlist_node fnode; @@ -1470,6 +1479,7 @@ int qlcnic_enable_msix(struct qlcnic_adapter *, u32); /* eSwitch management functions */ int qlcnic_config_switch_port(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); + int qlcnic_get_eswitch_port_config(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); int qlcnic_config_port_mirroring(struct qlcnic_adapter *, u8, u8, u8); @@ -1501,6 +1511,9 @@ void qlcnic_set_vlan_config(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); void qlcnic_set_eswitch_port_features(struct qlcnic_adapter *, struct qlcnic_esw_func_cfg *); + +void qlcnic_down(struct qlcnic_adapter *, struct net_device *); +int qlcnic_up(struct qlcnic_adapter *, struct net_device *); void __qlcnic_down(struct qlcnic_adapter *, struct net_device *); void qlcnic_detach(struct qlcnic_adapter *); void qlcnic_teardown_intr(struct qlcnic_adapter *); @@ -1508,6 +1521,7 @@ int qlcnic_attach(struct qlcnic_adapter *); int __qlcnic_up(struct qlcnic_adapter *, struct net_device *); void qlcnic_restore_indev_addr(struct net_device *, unsigned long); +int qlcnic_check_temp(struct qlcnic_adapter *); /* * QLOGIC Board information diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index a4a521e..8fdc4e6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -267,6 +267,8 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { static struct qlcnic_nic_template qlcnic_83xx_ops = { .config_bridged_mode = qlcnic_config_bridged_mode, .config_led = qlcnic_config_led, + .request_reset = qlcnic_83xx_idc_request_reset, + .cancel_idc_work = qlcnic_83xx_idc_exit, .napi_add = qlcnic_83xx_napi_add, .napi_del = qlcnic_83xx_napi_del, .config_ipaddr = qlcnic_83xx_config_ipaddr, @@ -589,6 +591,7 @@ int qlcnic_83xx_get_port_info(struct qlcnic_adapter *adapter) adapter->ahw->port_type = QLCNIC_XGBE; else adapter->ahw->port_type = QLCNIC_GBE; + if (QLC_83XX_AUTONEG(adapter->ahw->port_config)) adapter->ahw->link_autoneg = AUTONEG_ENABLE; } @@ -603,6 +606,7 @@ void qlcnic_83xx_enable_mbx_intrpt(struct qlcnic_adapter *adapter) val = BIT_2 | ((adapter->ahw->num_msix - 1) << 8); else val = BIT_2; + QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, val); } @@ -612,9 +616,7 @@ void qlcnic_83xx_check_vf(struct qlcnic_adapter *adapter, u32 op_mode, priv_level; struct qlcnic_hardware_context *ahw = adapter->ahw; - /* Determine FW API version */ ahw->fw_hal_version = 2; - /* Find PCI function number */ qlcnic_get_func_no(adapter); /* Determine function privilege level */ @@ -691,6 +693,13 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, struct qlcnic_hardware_context *ahw = adapter->ahw; opcode = LSW(cmd->req.arg[0]); + if (!test_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status)) { + dev_info(&adapter->pdev->dev, + "Mailbox cmd attempted, 0x%x\n", opcode); + dev_info(&adapter->pdev->dev, "Mailbox detached\n"); + return 0; + } + spin_lock(&ahw->mbx_lock); mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); @@ -853,6 +862,7 @@ static void qlcnic_83xx_handle_idc_comp_aen(struct qlcnic_adapter *adapter, { dev_dbg(&adapter->pdev->dev, "Completion AEN:0x%x.\n", QLCNIC_MBX_RSP(data[0])); + clear_bit(QLC_83XX_IDC_COMP_AEN, &adapter->ahw->idc.status); return; } @@ -1306,7 +1316,7 @@ int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode) int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) { struct qlcnic_hardware_context *ahw = adapter->ahw; - int status = 0; + int status = 0, loop = 0; u32 config; status = qlcnic_83xx_get_port_config(adapter); @@ -1314,6 +1324,7 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) return status; config = ahw->port_config; + set_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); if (mode == QLCNIC_ILB_MODE) ahw->port_config |= QLC_83XX_CFG_LOOPBACK_HSS; @@ -1326,9 +1337,21 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) "Failed to Set Loopback Mode = 0x%x.\n", ahw->port_config); ahw->port_config = config; + clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); return status; } + /* Wait until firmware send IDC Completion AEN */ + do { + msleep(300); + if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { + dev_err(&adapter->pdev->dev, + "FW did not generate IDC completion AEN\n"); + clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); + return -EIO; + } + } while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status)); + qlcnic_sre_macaddr_change(adapter, adapter->mac_addr, 0, QLCNIC_MAC_ADD); return status; @@ -1337,9 +1360,10 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode) { struct qlcnic_hardware_context *ahw = adapter->ahw; - int status = 0; + int status = 0, loop = 0; u32 config = ahw->port_config; + set_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); if (mode == QLCNIC_ILB_MODE) ahw->port_config &= ~QLC_83XX_CFG_LOOPBACK_HSS; if (mode == QLCNIC_ELB_MODE) @@ -1351,9 +1375,21 @@ int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode) "Failed to Clear Loopback Mode = 0x%x.\n", ahw->port_config); ahw->port_config = config; + clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); return status; } + /* Wait until firmware send IDC Completion AEN */ + do { + msleep(300); + if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { + dev_err(&adapter->pdev->dev, + "Firmware didn't sent IDC completion AEN\n"); + clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); + return -EIO; + } + } while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status)); + qlcnic_sre_macaddr_change(adapter, adapter->mac_addr, 0, QLCNIC_MAC_DEL); return status; @@ -1813,9 +1849,9 @@ void qlcnic_83xx_unlock_flash(struct qlcnic_adapter *adapter) QLC_SHARED_REG_WR32(adapter, QLCNIC_FLASH_LOCK_OWNER, 0xFF); } -static int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter, - u32 flash_addr, u8 *p_data, - int count) +int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter, + u32 flash_addr, u8 *p_data, + int count) { int i, ret; u32 word, range, flash_offset, addr = flash_addr; @@ -2142,3 +2178,168 @@ int qlcnic_83xx_flash_bulk_write(struct qlcnic_adapter *adapter, u32 addr, return 0; } + +static void qlcnic_83xx_recover_driver_lock(struct qlcnic_adapter *adapter) +{ + u32 val, id; + + val = QLCRDX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK); + + /* Check if recovery need to be performed by the calling function */ + if ((val & QLC_83XX_DRV_LOCK_RECOVERY_STATUS_MASK) == 0) { + val = val & ~0x3F; + val = val | ((adapter->portnum << 2) | + QLC_83XX_NEED_DRV_LOCK_RECOVERY); + QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, val); + dev_info(&adapter->pdev->dev, + "%s: lock recovery initiated\n", __func__); + msleep(QLC_83XX_DRV_LOCK_RECOVERY_DELAY); + val = QLCRDX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK); + id = ((val >> 2) & 0xF); + if (id == adapter->portnum) { + val = val & ~QLC_83XX_DRV_LOCK_RECOVERY_STATUS_MASK; + val = val | QLC_83XX_DRV_LOCK_RECOVERY_IN_PROGRESS; + QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, val); + /* Force release the lock */ + QLCRDX(adapter->ahw, QLC_83XX_DRV_UNLOCK); + /* Clear recovery bits */ + val = val & ~0x3F; + QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, val); + dev_info(&adapter->pdev->dev, + "%s: lock recovery completed\n", __func__); + } else { + dev_info(&adapter->pdev->dev, + "%s: func %d to resume lock recovery process\n", + __func__, id); + } + } else { + dev_info(&adapter->pdev->dev, + "%s: lock recovery initiated by other functions\n", + __func__); + } +} + +int qlcnic_83xx_lock_driver(struct qlcnic_adapter *adapter) +{ + u32 lock_alive_counter, val, id, i = 0, status = 0, temp = 0; + int max_attempt = 0; + + while (status == 0) { + status = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK); + if (status) + break; + + msleep(QLC_83XX_DRV_LOCK_WAIT_DELAY); + i++; + + if (i == 1) + temp = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); + + if (i == QLC_83XX_DRV_LOCK_WAIT_COUNTER) { + val = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); + if (val == temp) { + id = val & 0xFF; + dev_info(&adapter->pdev->dev, + "%s: lock to be recovered from %d\n", + __func__, id); + qlcnic_83xx_recover_driver_lock(adapter); + i = 0; + max_attempt++; + } else { + dev_err(&adapter->pdev->dev, + "%s: failed to get lock\n", __func__); + return -EIO; + } + } + + /* Force exit from while loop after few attempts */ + if (max_attempt == QLC_83XX_MAX_DRV_LOCK_RECOVERY_ATTEMPT) { + dev_err(&adapter->pdev->dev, + "%s: failed to get lock\n", __func__); + return -EIO; + } + } + + val = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); + lock_alive_counter = val >> 8; + lock_alive_counter++; + val = lock_alive_counter << 8 | adapter->portnum; + QLCWRX(adapter->ahw, QLC_83XX_DRV_LOCK_ID, val); + + return 0; +} + +void qlcnic_83xx_unlock_driver(struct qlcnic_adapter *adapter) +{ + u32 val, lock_alive_counter, id; + + val = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); + id = val & 0xFF; + lock_alive_counter = val >> 8; + + if (id != adapter->portnum) + dev_err(&adapter->pdev->dev, + "%s:Warning func %d is unlocking lock owned by %d\n", + __func__, adapter->portnum, id); + + val = (lock_alive_counter << 8) | 0xFF; + QLCWRX(adapter->ahw, QLC_83XX_DRV_LOCK_ID, val); + QLCRDX(adapter->ahw, QLC_83XX_DRV_UNLOCK); +} + +int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *adapter, u64 addr, + u32 *data, u32 count) +{ + int i, j, ret = 0; + u32 temp; + + /* Check alignment */ + if (addr & 0xF) + return -EIO; + + mutex_lock(&adapter->ahw->mem_lock); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_ADDR_HI, 0); + + for (i = 0; i < count; i++, addr += 16) { + if (!((ADDR_IN_RANGE(addr, QLCNIC_ADDR_QDR_NET, + QLCNIC_ADDR_QDR_NET_MAX)) || + (ADDR_IN_RANGE(addr, QLCNIC_ADDR_DDR_NET, + QLCNIC_ADDR_DDR_NET_MAX)))) { + mutex_unlock(&adapter->ahw->mem_lock); + return -EIO; + } + + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_ADDR_LO, addr); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_WRTDATA_LO, + *data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_WRTDATA_HI, + *data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_WRTDATA_ULO, + *data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_WRTDATA_UHI, + *data++); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_CTRL, + QLCNIC_TA_WRITE_ENABLE); + qlcnic_83xx_wrt_reg_indirect(adapter, QLCNIC_MS_CTRL, + QLCNIC_TA_WRITE_START); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qlcnic_83xx_rd_reg_indirect(adapter, + QLCNIC_MS_CTRL); + if ((temp & TA_CTL_BUSY) == 0) + break; + } + + /* Status check failure */ + if (j >= MAX_CTL_CHECK) { + printk_ratelimited(KERN_WARNING + "MS memory write failed\n"); + mutex_unlock(&adapter->ahw->mem_lock); + return -EIO; + } + } + + mutex_unlock(&adapter->ahw->mem_lock); + + return ret; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 4519995..99b8427 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -53,6 +53,30 @@ #define QLCNIC_HOST_RDS_MBX_IDX 88 #define QLCNIC_MAX_RING_SETS 8 +/* Pause control registers */ +#define QLC_83XX_SRE_SHIM_REG 0x0D200284 +#define QLC_83XX_PORT0_THRESHOLD 0x0B2003A4 +#define QLC_83XX_PORT1_THRESHOLD 0x0B2013A4 +#define QLC_83XX_PORT0_TC_MC_REG 0x0B200388 +#define QLC_83XX_PORT1_TC_MC_REG 0x0B201388 +#define QLC_83XX_PORT0_TC_STATS 0x0B20039C +#define QLC_83XX_PORT1_TC_STATS 0x0B20139C +#define QLC_83XX_PORT2_IFB_THRESHOLD 0x0B200704 +#define QLC_83XX_PORT3_IFB_THRESHOLD 0x0B201704 + +/* Peg PC status registers */ +#define QLC_83XX_CRB_PEG_NET_0 0x3400003c +#define QLC_83XX_CRB_PEG_NET_1 0x3410003c +#define QLC_83XX_CRB_PEG_NET_2 0x3420003c +#define QLC_83XX_CRB_PEG_NET_3 0x3430003c +#define QLC_83XX_CRB_PEG_NET_4 0x34b0003c + +/* Firmware image definitions */ +#define QLC_83XX_BOOTLOADER_FLASH_ADDR 0x10000 +#define QLC_83XX_FW_FILE_NAME "83xx_fw.bin" +#define QLC_83XX_BOOT_FROM_FLASH 0 +#define QLC_83XX_BOOT_FROM_FILE 0x12345678 + struct qlcnic_intrpt_config { u8 type; u8 enabled; @@ -65,6 +89,49 @@ struct qlcnic_macvlan_mbx { u16 vlan; }; +struct qlc_83xx_fw_info { + const struct firmware *fw; + u16 major_fw_version; + u8 minor_fw_version; + u8 sub_fw_version; + u8 fw_build_num; + u8 load_from_file; +}; + +#define QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY 0x1 +#define QLC_83XX_IDC_GRACEFULL_RESET 0x2 +#define QLC_83XX_IDC_TIMESTAMP 0 +#define QLC_83XX_IDC_DURATION 1 +#define QLC_83XX_IDC_INIT_TIMEOUT_SECS 30 +#define QLC_83XX_IDC_RESET_ACK_TIMEOUT_SECS 10 +#define QLC_83XX_IDC_RESET_TIMEOUT_SECS 10 +#define QLC_83XX_IDC_QUIESCE_ACK_TIMEOUT_SECS 20 +#define QLC_83XX_IDC_FW_POLL_DELAY (1 * HZ) +#define QLC_83XX_IDC_FW_FAIL_THRESH 2 +#define QLC_83XX_IDC_MAX_FUNC_PER_PARTITION_INFO 8 +#define QLC_83XX_IDC_MAX_CNA_FUNCTIONS 16 +#define QLC_83XX_IDC_MAJOR_VERSION 1 +#define QLC_83XX_IDC_MINOR_VERSION 0 +#define QLC_83XX_IDC_FLASH_PARAM_ADDR 0x3e8020 + +/* Mailbox process AEN count */ +#define QLC_83XX_MBX_AEN_CNT 5 + +struct qlcnic_adapter; +struct qlc_83xx_idc { + int (*state_entry) (struct qlcnic_adapter *); + u64 sec_counter; + u64 delay; + unsigned long status; + int err_code; + int collect_dump; + u8 curr_state; + u8 prev_state; + u8 vnic_state; + u8 vnic_wait_limit; + u8 quiesce_req; + char **name; +}; /* Mailbox process AEN count */ #define QLC_83XX_IDC_COMP_AEN 3 @@ -303,4 +370,17 @@ int qlcnic_83xx_save_flash_status(struct qlcnic_adapter *); int qlcnic_83xx_restore_flash_status(struct qlcnic_adapter *, int); int qlcnic_83xx_read_flash_mfg_id(struct qlcnic_adapter *); int qlcnic_83xx_read_flash_descriptor_table(struct qlcnic_adapter *); +int qlcnic_83xx_flash_read32(struct qlcnic_adapter *, u32, u8 *, int); +int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *, + u32, u8 *, int); +int qlcnic_83xx_init(struct qlcnic_adapter *); +int qlcnic_83xx_idc_ready_state_entry(struct qlcnic_adapter *); +int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev); +void qlcnic_83xx_idc_poll_dev_state(struct work_struct *); +void qlcnic_83xx_idc_exit(struct qlcnic_adapter *); +void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *, u32); +int qlcnic_83xx_lock_driver(struct qlcnic_adapter *); +void qlcnic_83xx_unlock_driver(struct qlcnic_adapter *); +int qlcnic_83xx_set_default_offload_settings(struct qlcnic_adapter *); +int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *, u64, u32 *, u32); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c new file mode 100644 index 0000000..c26d190 --- /dev/null +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -0,0 +1,1513 @@ +#include "qlcnic.h" +#include "qlcnic_hw.h" + +static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter); +static int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter); +static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev); +static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter); + +static const char *const qlc_83xx_idc_states[] = { + "Unknown", + "Cold", + "Init", + "Ready", + "Need Reset", + "Need Quiesce", + "Failed", + "Quiesce" +}; + +/* Device States */ +enum qlcnic_83xx_states { + QLC_83XX_IDC_DEV_UNKNOWN, + QLC_83XX_IDC_DEV_COLD, + QLC_83XX_IDC_DEV_INIT, + QLC_83XX_IDC_DEV_READY, + QLC_83XX_IDC_DEV_NEED_RESET, + QLC_83XX_IDC_DEV_NEED_QUISCENT, + QLC_83XX_IDC_DEV_FAILED, + QLC_83XX_IDC_DEV_QUISCENT +}; + +static int +qlcnic_83xx_idc_check_driver_presence_reg(struct qlcnic_adapter *adapter) +{ + u32 val; + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); + if ((val & 0xFFFF)) + return 1; + else + return 0; +} + +static void qlcnic_83xx_idc_log_state_history(struct qlcnic_adapter *adapter) +{ + u32 cur, prev; + cur = adapter->ahw->idc.curr_state; + prev = adapter->ahw->idc.prev_state; + + dev_info(&adapter->pdev->dev, + "current state = %s, prev state = %s\n", + adapter->ahw->idc.name[cur], + adapter->ahw->idc.name[prev]); +} + +static int qlcnic_83xx_idc_update_audit_reg(struct qlcnic_adapter *adapter, + u8 mode, int lock) +{ + u32 val; + int seconds; + + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + val = adapter->portnum & 0xf; + val |= mode << 7; + if (mode) + seconds = jiffies / HZ - adapter->ahw->idc.sec_counter; + else + seconds = jiffies / HZ; + + val |= seconds << 8; + QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT, val); + adapter->ahw->idc.sec_counter = jiffies / HZ; + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static void qlcnic_83xx_idc_update_minor_version(struct qlcnic_adapter *adapter) +{ + u32 val; + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MIN_VERSION); + val = val & ~(0x3 << (adapter->portnum * 2)); + val = val | (QLC_83XX_IDC_MINOR_VERSION << (adapter->portnum * 2)); + QLCWRX(adapter->ahw, QLC_83XX_IDC_MIN_VERSION, val); +} + +static int qlcnic_83xx_idc_update_major_version(struct qlcnic_adapter *adapter, + int lock) +{ + u32 val; + + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION); + val = val & ~0xFF; + val = val | QLC_83XX_IDC_MAJOR_VERSION; + QLCWRX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION, val); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int +qlcnic_83xx_idc_update_drv_presence_reg(struct qlcnic_adapter *adapter, + int status, int lock) +{ + u32 val; + + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); + + if (status) + val = val | (1 << adapter->portnum); + else + val = val & ~(1 << adapter->portnum); + + QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val); + qlcnic_83xx_idc_update_minor_version(adapter); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_idc_check_major_version(struct qlcnic_adapter *adapter) +{ + u32 val; + u8 version; + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION); + version = val & 0xFF; + + if (version != QLC_83XX_IDC_MAJOR_VERSION) { + dev_info(&adapter->pdev->dev, + "%s:mismatch. version 0x%x, expected version 0x%x\n", + __func__, version, QLC_83XX_IDC_MAJOR_VERSION); + return -EIO; + } + + return 0; +} + +static int qlcnic_83xx_idc_clear_registers(struct qlcnic_adapter *adapter, + int lock) +{ + u32 val; + + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, 0); + /* Clear gracefull reset bit */ + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + val &= ~QLC_83XX_IDC_GRACEFULL_RESET; + QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_idc_update_drv_ack_reg(struct qlcnic_adapter *adapter, + int flag, int lock) +{ + u32 val; + + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_ACK); + if (flag) + val = val | (1 << adapter->portnum); + else + val = val & ~(1 << adapter->portnum); + QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, val); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_idc_check_timeout(struct qlcnic_adapter *adapter, + int time_limit) +{ + u64 seconds; + + seconds = jiffies / HZ - adapter->ahw->idc.sec_counter; + if (seconds <= time_limit) + return 0; + else + return -EBUSY; +} + +/** + * qlcnic_83xx_idc_check_reset_ack_reg + * + * @adapter: adapter structure + * + * Check ACK wait limit and clear the functions which failed to ACK + * + * Return 0 if all functions have acknowledged the reset request. + **/ +static int qlcnic_83xx_idc_check_reset_ack_reg(struct qlcnic_adapter *adapter) +{ + int timeout; + u32 ack, presence, val; + + timeout = QLC_83XX_IDC_RESET_TIMEOUT_SECS; + ack = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_ACK); + presence = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); + dev_info(&adapter->pdev->dev, + "%s: ack = 0x%x, presence = 0x%x\n", __func__, ack, presence); + if (!((ack & presence) == presence)) { + if (qlcnic_83xx_idc_check_timeout(adapter, timeout)) { + /* Clear functions which failed to ACK */ + dev_info(&adapter->pdev->dev, + "%s: ACK wait exceeds time limit\n", __func__); + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); + val = val & ~(ack ^ presence); + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val); + dev_info(&adapter->pdev->dev, + "%s: updated drv presence reg = 0x%x\n", + __func__, val); + qlcnic_83xx_unlock_driver(adapter); + return 0; + + } else { + return 1; + } + } else { + dev_info(&adapter->pdev->dev, + "%s: Reset ACK received from all functions\n", + __func__); + return 0; + } +} + +/** + * qlcnic_83xx_idc_tx_soft_reset + * + * @adapter: adapter structure + * + * Handle context deletion and recreation request from transmit routine + * + * Returns -EBUSY or Success (0) + * + **/ +static int qlcnic_83xx_idc_tx_soft_reset(struct qlcnic_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) + return -EBUSY; + + netif_device_detach(netdev); + qlcnic_down(adapter, netdev); + qlcnic_up(adapter, netdev); + netif_device_attach(netdev); + clear_bit(__QLCNIC_RESETTING, &adapter->state); + dev_err(&adapter->pdev->dev, "%s:\n", __func__); + + adapter->netdev->trans_start = jiffies; + + return 0; +} + +/** + * qlcnic_83xx_idc_detach_driver + * + * @adapter: adapter structure + * Detach net interface, stop TX and cleanup resources before the HW reset. + * Returns: None + * + **/ +static void qlcnic_83xx_idc_detach_driver(struct qlcnic_adapter *adapter) +{ + int i; + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + /* Disable mailbox interrupt */ + QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, 0); + qlcnic_down(adapter, netdev); + for (i = 0; i < adapter->ahw->num_msix; i++) { + adapter->ahw->intr_tbl[i].id = i; + adapter->ahw->intr_tbl[i].enabled = 0; + adapter->ahw->intr_tbl[i].src = 0; + } +} + +/** + * qlcnic_83xx_idc_attach_driver + * + * @adapter: adapter structure + * + * Re-attach and re-enable net interface + * Returns: None + * + **/ +static void qlcnic_83xx_idc_attach_driver(struct qlcnic_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + if (netif_running(netdev)) { + if (qlcnic_up(adapter, netdev)) + goto done; + qlcnic_restore_indev_addr(netdev, NETDEV_UP); + } +done: + netif_device_attach(netdev); + if (netif_running(netdev)) { + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } +} + +static int qlcnic_83xx_idc_enter_failed_state(struct qlcnic_adapter *adapter, + int lock) +{ + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + qlcnic_83xx_idc_clear_registers(adapter, 0); + QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_FAILED); + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + qlcnic_83xx_idc_log_state_history(adapter); + dev_info(&adapter->pdev->dev, "Device will enter failed state\n"); + + return 0; +} + +static int qlcnic_83xx_idc_enter_init_state(struct qlcnic_adapter *adapter, + int lock) +{ + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_INIT); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_idc_enter_need_quiesce(struct qlcnic_adapter *adapter, + int lock) +{ + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, + QLC_83XX_IDC_DEV_NEED_QUISCENT); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int +qlcnic_83xx_idc_enter_need_reset_state(struct qlcnic_adapter *adapter, int lock) +{ + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, + QLC_83XX_IDC_DEV_NEED_RESET); + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_idc_enter_ready_state(struct qlcnic_adapter *adapter, + int lock) +{ + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_READY); + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +/** + * qlcnic_83xx_idc_find_reset_owner_id + * + * @adapter: adapter structure + * + * NIC gets precedence over ISCSI and ISCSI has precedence over FCOE. + * Within the same class, function with lowest PCI ID assumes ownership + * + * Returns: reset owner id or failure indication (-EIO) + * + **/ +static int qlcnic_83xx_idc_find_reset_owner_id(struct qlcnic_adapter *adapter) +{ + u32 reg, reg1, reg2, i, j, owner, class; + + reg1 = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_PARTITION_INFO_1); + reg2 = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_PARTITION_INFO_2); + owner = QLCNIC_TYPE_NIC; + i = 0; + j = 0; + reg = reg1; + + do { + class = (((reg & (0xF << j * 4)) >> j * 4) & 0x3); + if (class == owner) + break; + if (i == (QLC_83XX_IDC_MAX_FUNC_PER_PARTITION_INFO - 1)) { + reg = reg2; + j = 0; + } else { + j++; + } + + if (i == (QLC_83XX_IDC_MAX_CNA_FUNCTIONS - 1)) { + if (owner == QLCNIC_TYPE_NIC) + owner = QLCNIC_TYPE_ISCSI; + else if (owner == QLCNIC_TYPE_ISCSI) + owner = QLCNIC_TYPE_FCOE; + else if (owner == QLCNIC_TYPE_FCOE) + return -EIO; + reg = reg1; + j = 0; + i = 0; + } + } while (i++ < QLC_83XX_IDC_MAX_CNA_FUNCTIONS); + + return i; +} + +static int qlcnic_83xx_idc_restart_hw(struct qlcnic_adapter *adapter, int lock) +{ + int ret = 0; + + ret = qlcnic_83xx_restart_hw(adapter); + + if (ret) { + qlcnic_83xx_idc_enter_failed_state(adapter, lock); + } else { + qlcnic_83xx_idc_clear_registers(adapter, lock); + ret = qlcnic_83xx_idc_enter_ready_state(adapter, lock); + } + + return ret; +} + +static int qlcnic_83xx_idc_check_fan_failure(struct qlcnic_adapter *adapter) +{ + u32 status; + + status = QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS1); + + if (status & QLCNIC_RCODE_FATAL_ERROR) { + dev_err(&adapter->pdev->dev, + "peg halt status1=0x%x\n", status); + if (QLCNIC_FWERROR_CODE(status) == QLCNIC_FWERROR_FAN_FAILURE) { + dev_err(&adapter->pdev->dev, + "On board active cooling fan failed. " + "Device has been halted.\n"); + dev_err(&adapter->pdev->dev, + "Replace the adapter.\n"); + return -EIO; + } + } + + return 0; +} + +static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter) +{ + qlcnic_83xx_enable_mbx_intrpt(adapter); + if ((adapter->flags & QLCNIC_MSIX_ENABLED)) { + if (qlcnic_83xx_config_intrpt(adapter, 1)) { + netdev_err(adapter->netdev, + "Failed to enable mbx intr\n"); + return -EIO; + } + } + + if (qlcnic_83xx_configure_opmode(adapter)) { + qlcnic_83xx_idc_enter_failed_state(adapter, 1); + return -EIO; + } + + if (adapter->nic_ops->init_driver(adapter)) { + qlcnic_83xx_idc_enter_failed_state(adapter, 1); + return -EIO; + } + + qlcnic_83xx_idc_attach_driver(adapter); + + return 0; +} + +static void qlcnic_83xx_idc_update_idc_params(struct qlcnic_adapter *adapter) +{ + qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 1); + clear_bit(__QLCNIC_RESETTING, &adapter->state); + set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); + qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); + set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); + adapter->ahw->idc.quiesce_req = 0; + adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; + adapter->ahw->idc.err_code = 0; + adapter->ahw->idc.collect_dump = 0; +} + +/** + * qlcnic_83xx_idc_ready_state_entry + * + * @adapter: adapter structure + * + * Perform ready state initialization, this routine will get invoked only + * once from READY state. + * + * Returns: Error code or Success(0) + * + **/ +int qlcnic_83xx_idc_ready_state_entry(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_READY) { + qlcnic_83xx_idc_update_idc_params(adapter); + /* Re-attach the device if required */ + if ((ahw->idc.prev_state == QLC_83XX_IDC_DEV_NEED_RESET) || + (ahw->idc.prev_state == QLC_83XX_IDC_DEV_INIT)) { + if (qlcnic_83xx_idc_reattach_driver(adapter)) + return -EIO; + } + } + + return 0; +} + +static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter) +{ + adapter->ahw->idc.err_code = -EIO; + dev_err(&adapter->pdev->dev, + "%s: Device in unknown state\n", __func__); + return 0; +} + +/** + * qlcnic_83xx_idc_cold_state + * + * @adapter: adapter structure + * + * If HW is up and running device will enter READY state. + * If firmware image from host needs to be loaded, device is + * forced to start with the file firmware image. + * + * Returns: Error code or Success(0) + * + **/ +static int qlcnic_83xx_idc_cold_state_handler(struct qlcnic_adapter *adapter) +{ + qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 0); + qlcnic_83xx_idc_update_audit_reg(adapter, 1, 0); + + if (qlcnic_load_fw_file) { + qlcnic_83xx_idc_restart_hw(adapter, 0); + } else { + if (qlcnic_83xx_check_hw_status(adapter)) { + qlcnic_83xx_idc_enter_failed_state(adapter, 0); + return -EIO; + } else { + qlcnic_83xx_idc_enter_ready_state(adapter, 0); + } + } + return 0; +} + +/** + * qlcnic_83xx_idc_init_state + * + * @adapter: adapter structure + * + * Reset owner will restart the device from this state. + * Device will enter failed state if it remains + * in this state for more than DEV_INIT time limit. + * + * Returns: Error code or Success(0) + * + **/ +static int qlcnic_83xx_idc_init_state(struct qlcnic_adapter *adapter) +{ + int timeout, ret = 0; + u32 owner; + + timeout = QLC_83XX_IDC_INIT_TIMEOUT_SECS; + if (adapter->ahw->idc.prev_state == QLC_83XX_IDC_DEV_NEED_RESET) { + owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); + if (adapter->ahw->pci_func == owner) + ret = qlcnic_83xx_idc_restart_hw(adapter, 1); + } else { + ret = qlcnic_83xx_idc_check_timeout(adapter, timeout); + return ret; + } + + return ret; +} + +/** + * qlcnic_83xx_idc_ready_state + * + * @adapter: adapter structure + * + * Perform IDC protocol specicifed actions after monitoring device state and + * events. + * + * Returns: Error code or Success(0) + * + **/ +static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) +{ + u32 val; + struct qlcnic_hardware_context *ahw = adapter->ahw; + int ret = 0; + + /* Perform NIC configuration based ready state entry actions */ + if (ahw->idc.state_entry(adapter)) + return -EIO; + + if (qlcnic_check_temp(adapter)) { + if (ahw->temp == QLCNIC_TEMP_PANIC) { + qlcnic_83xx_idc_check_fan_failure(adapter); + dev_err(&adapter->pdev->dev, + "Error: device temperature %d above limits\n", + adapter->ahw->temp); + clear_bit(QLC_83XX_MBX_READY, &ahw->idc.status); + set_bit(__QLCNIC_RESETTING, &adapter->state); + qlcnic_83xx_idc_detach_driver(adapter); + qlcnic_83xx_idc_enter_failed_state(adapter, 1); + return -EIO; + } + } + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + ret = qlcnic_83xx_check_heartbeat(adapter); + if (ret) { + adapter->flags |= QLCNIC_FW_HANG; + if (!(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) { + clear_bit(QLC_83XX_MBX_READY, &ahw->idc.status); + set_bit(__QLCNIC_RESETTING, &adapter->state); + qlcnic_83xx_idc_enter_need_reset_state(adapter, 1); + } + return -EIO; + } + + if ((val & QLC_83XX_IDC_GRACEFULL_RESET) || ahw->idc.collect_dump) { + /* Move to need reset state and prepare for reset */ + qlcnic_83xx_idc_enter_need_reset_state(adapter, 1); + return ret; + } + + /* Check for soft reset request */ + if (ahw->reset_context && + !(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) { + qlcnic_83xx_idc_tx_soft_reset(adapter); + return ret; + } + + /* Move to need quiesce state if requested */ + if (adapter->ahw->idc.quiesce_req) { + qlcnic_83xx_idc_enter_need_quiesce(adapter, 1); + qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); + return ret; + } + + return ret; +} + +/** + * qlcnic_83xx_idc_need_reset_state + * + * @adapter: adapter structure + * + * Device will remain in this state until: + * Reset request ACK's are recieved from all the functions + * Wait time exceeds max time limit + * + * Returns: Error code or Success(0) + * + **/ +static int qlcnic_83xx_idc_need_reset_state(struct qlcnic_adapter *adapter) +{ + int ret = 0; + + if (adapter->ahw->idc.prev_state != QLC_83XX_IDC_DEV_NEED_RESET) { + qlcnic_83xx_idc_update_drv_ack_reg(adapter, 1, 1); + qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); + set_bit(__QLCNIC_RESETTING, &adapter->state); + clear_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); + qlcnic_83xx_idc_detach_driver(adapter); + } + + /* Check ACK from other functions */ + ret = qlcnic_83xx_idc_check_reset_ack_reg(adapter); + if (ret) { + dev_info(&adapter->pdev->dev, + "%s: Waiting for reset ACK\n", __func__); + return 0; + } + + /* Transit to INIT state and restart the HW */ + qlcnic_83xx_idc_enter_init_state(adapter, 1); + + return ret; +} + +static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter) +{ + dev_err(&adapter->pdev->dev, "%s: TBD\n", __func__); + return 0; +} + +static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) +{ + dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__); + adapter->ahw->idc.err_code = -EIO; + + return 0; +} + +static int qlcnic_83xx_idc_quiesce_state(struct qlcnic_adapter *adapter) +{ + dev_info(&adapter->pdev->dev, "%s: TBD\n", __func__); + return 0; +} + +static int qlcnic_83xx_idc_check_state_validity(struct qlcnic_adapter *adapter, + u32 state) +{ + u32 cur, prev, next; + + cur = adapter->ahw->idc.curr_state; + prev = adapter->ahw->idc.prev_state; + next = state; + + if ((next < QLC_83XX_IDC_DEV_COLD) || + (next > QLC_83XX_IDC_DEV_QUISCENT)) { + dev_err(&adapter->pdev->dev, + "%s: curr %d, prev %d, next state %d is invalid\n", + __func__, cur, prev, state); + return 1; + } + + if ((cur == QLC_83XX_IDC_DEV_UNKNOWN) && + (prev == QLC_83XX_IDC_DEV_UNKNOWN)) { + if ((next != QLC_83XX_IDC_DEV_COLD) && + (next != QLC_83XX_IDC_DEV_READY)) { + dev_err(&adapter->pdev->dev, + "%s: failed, cur %d prev %d next %d\n", + __func__, cur, prev, next); + return 1; + } + } + + if (next == QLC_83XX_IDC_DEV_INIT) { + if ((prev != QLC_83XX_IDC_DEV_INIT) && + (prev != QLC_83XX_IDC_DEV_COLD) && + (prev != QLC_83XX_IDC_DEV_NEED_RESET)) { + dev_err(&adapter->pdev->dev, + "%s: failed, cur %d prev %d next %d\n", + __func__, cur, prev, next); + return 1; + } + } + + return 0; +} + +static void qlcnic_83xx_periodic_tasks(struct qlcnic_adapter *adapter) +{ + if (adapter->fhash.fnum) + qlcnic_prune_lb_filters(adapter); +} + +/** + * qlcnic_83xx_idc_poll_dev_state + * + * @work: kernel work queue structure used to schedule the function + * + * Poll device state periodically and perform state specific + * actions defined by Inter Driver Communication (IDC) protocol. + * + * Returns: None + * + **/ +void qlcnic_83xx_idc_poll_dev_state(struct work_struct *work) +{ + struct qlcnic_adapter *adapter; + u32 state; + + adapter = container_of(work, struct qlcnic_adapter, fw_work.work); + state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE); + + if (qlcnic_83xx_idc_check_state_validity(adapter, state)) { + qlcnic_83xx_idc_log_state_history(adapter); + adapter->ahw->idc.curr_state = QLC_83XX_IDC_DEV_UNKNOWN; + } else { + adapter->ahw->idc.curr_state = state; + } + + switch (adapter->ahw->idc.curr_state) { + case QLC_83XX_IDC_DEV_READY: + qlcnic_83xx_idc_ready_state(adapter); + break; + case QLC_83XX_IDC_DEV_NEED_RESET: + qlcnic_83xx_idc_need_reset_state(adapter); + break; + case QLC_83XX_IDC_DEV_NEED_QUISCENT: + qlcnic_83xx_idc_need_quiesce_state(adapter); + break; + case QLC_83XX_IDC_DEV_FAILED: + qlcnic_83xx_idc_failed_state(adapter); + return; + case QLC_83XX_IDC_DEV_INIT: + qlcnic_83xx_idc_init_state(adapter); + break; + case QLC_83XX_IDC_DEV_QUISCENT: + qlcnic_83xx_idc_quiesce_state(adapter); + break; + default: + qlcnic_83xx_idc_unknown_state(adapter); + return; + } + adapter->ahw->idc.prev_state = adapter->ahw->idc.curr_state; + qlcnic_83xx_periodic_tasks(adapter); + + /* Re-schedule the function */ + if (test_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status)) + qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state, + adapter->ahw->idc.delay); +} + +static void qlcnic_83xx_setup_idc_parameters(struct qlcnic_adapter *adapter) +{ + u32 idc_params, val; + + if (qlcnic_83xx_lockless_flash_read32(adapter, + QLC_83XX_IDC_FLASH_PARAM_ADDR, + (u8 *)&idc_params, 1)) { + dev_info(&adapter->pdev->dev, + "%s:failed to get IDC params from flash\n", __func__); + adapter->dev_init_timeo = QLC_83XX_IDC_INIT_TIMEOUT_SECS; + adapter->reset_ack_timeo = QLC_83XX_IDC_RESET_TIMEOUT_SECS; + } else { + adapter->dev_init_timeo = idc_params & 0xFFFF; + adapter->reset_ack_timeo = ((idc_params >> 16) & 0xFFFF); + } + + adapter->ahw->idc.curr_state = QLC_83XX_IDC_DEV_UNKNOWN; + adapter->ahw->idc.prev_state = QLC_83XX_IDC_DEV_UNKNOWN; + adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; + adapter->ahw->idc.err_code = 0; + adapter->ahw->idc.collect_dump = 0; + adapter->ahw->idc.name = (char **)qlc_83xx_idc_states; + + clear_bit(__QLCNIC_RESETTING, &adapter->state); + set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); + set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); + + /* Check if reset recovery is disabled */ + if (!qlcnic_auto_fw_reset) { + /* Propagate do not reset request to other functions */ + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + val = val | QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY; + QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); + } +} + +static int +qlcnic_83xx_idc_first_to_load_function_handler(struct qlcnic_adapter *adapter) +{ + u32 state, val; + + if (qlcnic_83xx_lock_driver(adapter)) + return -EIO; + + /* Clear driver lock register */ + QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, 0); + if (qlcnic_83xx_idc_update_major_version(adapter, 0)) { + qlcnic_83xx_unlock_driver(adapter); + return -EIO; + } + + state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE); + if (qlcnic_83xx_idc_check_state_validity(adapter, state)) { + qlcnic_83xx_unlock_driver(adapter); + return -EIO; + } + + if (state != QLC_83XX_IDC_DEV_COLD && qlcnic_load_fw_file) { + QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, + QLC_83XX_IDC_DEV_COLD); + state = QLC_83XX_IDC_DEV_COLD; + } + + adapter->ahw->idc.curr_state = state; + /* First to load function should cold boot the device */ + if (state == QLC_83XX_IDC_DEV_COLD) + qlcnic_83xx_idc_cold_state_handler(adapter); + + /* Check if reset recovery is enabled */ + if (qlcnic_auto_fw_reset) { + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + val = val & ~QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY; + QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); + } + + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_idc_init(struct qlcnic_adapter *adapter) +{ + qlcnic_83xx_setup_idc_parameters(adapter); + + if (!qlcnic_83xx_idc_check_driver_presence_reg(adapter)) { + if (qlcnic_83xx_idc_first_to_load_function_handler(adapter)) + return -EIO; + } else { + if (qlcnic_83xx_idc_check_major_version(adapter)) + return -EIO; + } + + qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); + + return 0; +} + +void qlcnic_83xx_idc_exit(struct qlcnic_adapter *adapter) +{ + int id; + u32 val; + + while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) + usleep_range(10000, 11000); + + id = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); + id = id & 0xFF; + + if (id == adapter->portnum) { + dev_err(&adapter->pdev->dev, + "%s: wait for lock recovery.. %d\n", __func__, id); + msleep(20); + id = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); + id = id & 0xFF; + } + + /* Clear driver presence bit */ + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); + val = val & ~(1 << adapter->portnum); + QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val); + clear_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); + clear_bit(__QLCNIC_RESETTING, &adapter->state); + + cancel_delayed_work_sync(&adapter->fw_work); +} + +void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *adapter, u32 key) +{ + u32 val; + + if (qlcnic_83xx_lock_driver(adapter)) { + dev_err(&adapter->pdev->dev, + "%s:failed, please retry\n", __func__); + return; + } + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + if ((val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) || + !qlcnic_auto_fw_reset) { + dev_err(&adapter->pdev->dev, + "%s:failed, device in non reset mode\n", __func__); + qlcnic_83xx_unlock_driver(adapter); + return; + } + + if (key == QLCNIC_FORCE_FW_RESET) { + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + val = val | QLC_83XX_IDC_GRACEFULL_RESET; + QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); + } else if (key == QLCNIC_FORCE_FW_DUMP_KEY) { + adapter->ahw->idc.collect_dump = 1; + } + + qlcnic_83xx_unlock_driver(adapter); + return; +} + +static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter) +{ + u8 *p_cache; + u32 src, size; + u64 dest; + int ret = -EIO; + + src = QLC_83XX_BOOTLOADER_FLASH_ADDR; + dest = QLCRDX(adapter->ahw, QLCNIC_BOOTLOADER_ADDR); + size = QLCRDX(adapter->ahw, QLCNIC_BOOTLOADER_SIZE); + + /* alignment check */ + if (size & 0xF) + size = (size + 16) & ~0xF; + + p_cache = kzalloc(size, GFP_KERNEL); + + if (p_cache == NULL) { + dev_err(&adapter->pdev->dev, + "Failed to allocate memory for boot loader cache\n"); + return -ENOMEM; + } + ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache, + size / sizeof(u32)); + if (ret) { + kfree(p_cache); + return ret; + } + /* 16 byte write to MS memory */ + ret = qlcnic_83xx_ms_mem_write128(adapter, dest, (u32 *)p_cache, + size / 16); + if (ret) { + kfree(p_cache); + return ret; + } + kfree(p_cache); + + return ret; +} + +static int qlcnic_83xx_copy_fw_file(struct qlcnic_adapter *adapter) +{ + u32 dest, *p_cache; + u64 addr; + u8 data[16]; + size_t size; + int i, ret = -EIO; + + dest = QLCRDX(adapter->ahw, QLCNIC_FW_IMAGE_ADDR); + size = (adapter->ahw->fw_info.fw->size & ~0xF); + p_cache = (u32 *)adapter->ahw->fw_info.fw->data; + addr = (u64)dest; + + ret = qlcnic_83xx_ms_mem_write128(adapter, addr, + (u32 *)p_cache, size / 16); + if (ret) { + dev_err(&adapter->pdev->dev, "MS memory write failed\n"); + release_firmware(adapter->ahw->fw_info.fw); + adapter->ahw->fw_info.fw = NULL; + return -EIO; + } + + /* alignment check */ + if (adapter->ahw->fw_info.fw->size & 0xF) { + addr = dest + size; + for (i = 0; i < (adapter->ahw->fw_info.fw->size & 0xF); i++) + data[i] = adapter->ahw->fw_info.fw->data[size + i]; + for (; i < 16; i++) + data[i] = 0; + ret = qlcnic_83xx_ms_mem_write128(adapter, addr, + (u32 *)data, 1); + if (ret) { + dev_err(&adapter->pdev->dev, + "MS memory write failed\n"); + release_firmware(adapter->ahw->fw_info.fw); + adapter->ahw->fw_info.fw = NULL; + return -EIO; + } + } + release_firmware(adapter->ahw->fw_info.fw); + adapter->ahw->fw_info.fw = NULL; + + return 0; +} + +static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) +{ + int i, j; + u32 val = 0, val1 = 0, reg = 0; + + val = QLCRD32(adapter, QLC_83XX_SRE_SHIM_REG); + dev_info(&adapter->pdev->dev, "SRE-Shim Ctrl:0x%x\n", val); + + for (j = 0; j < 2; j++) { + if (j == 0) { + dev_info(&adapter->pdev->dev, + "Port 0 RxB Pause Threshold Regs[TC7..TC0]:"); + reg = QLC_83XX_PORT0_THRESHOLD; + } else if (j == 1) { + dev_info(&adapter->pdev->dev, + "Port 1 RxB Pause Threshold Regs[TC7..TC0]:"); + reg = QLC_83XX_PORT1_THRESHOLD; + } + for (i = 0; i < 8; i++) { + val = QLCRD32(adapter, reg + (i * 0x4)); + dev_info(&adapter->pdev->dev, "0x%x ", val); + } + dev_info(&adapter->pdev->dev, "\n"); + } + + for (j = 0; j < 2; j++) { + if (j == 0) { + dev_info(&adapter->pdev->dev, + "Port 0 RxB TC Max Cell Registers[4..1]:"); + reg = QLC_83XX_PORT0_TC_MC_REG; + } else if (j == 1) { + dev_info(&adapter->pdev->dev, + "Port 1 RxB TC Max Cell Registers[4..1]:"); + reg = QLC_83XX_PORT1_TC_MC_REG; + } + for (i = 0; i < 4; i++) { + val = QLCRD32(adapter, reg + (i * 0x4)); + dev_info(&adapter->pdev->dev, "0x%x ", val); + } + dev_info(&adapter->pdev->dev, "\n"); + } + + for (j = 0; j < 2; j++) { + if (j == 0) { + dev_info(&adapter->pdev->dev, + "Port 0 RxB Rx TC Stats[TC7..TC0]:"); + reg = QLC_83XX_PORT0_TC_STATS; + } else if (j == 1) { + dev_info(&adapter->pdev->dev, + "Port 1 RxB Rx TC Stats[TC7..TC0]:"); + reg = QLC_83XX_PORT1_TC_STATS; + } + for (i = 7; i >= 0; i--) { + val = QLCRD32(adapter, reg); + val &= ~(0x7 << 29); /* Reset bits 29 to 31 */ + QLCWR32(adapter, reg, (val | (i << 29))); + val = QLCRD32(adapter, reg); + dev_info(&adapter->pdev->dev, "0x%x ", val); + } + dev_info(&adapter->pdev->dev, "\n"); + } + + val = QLCRD32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD); + val1 = QLCRD32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD); + dev_info(&adapter->pdev->dev, + "IFB-Pause Thresholds: Port 2:0x%x, Port 3:0x%x\n", + val, val1); +} + +static void qlcnic_83xx_disable_pause_frames(struct qlcnic_adapter *adapter) +{ + u32 reg = 0, i, j; + + if (qlcnic_83xx_lock_driver(adapter)) { + dev_err(&adapter->pdev->dev, + "%s:failed to acquire driver lock\n", __func__); + return; + } + + qlcnic_83xx_dump_pause_control_regs(adapter); + QLCWR32(adapter, QLC_83XX_SRE_SHIM_REG, 0x0); + + for (j = 0; j < 2; j++) { + if (j == 0) + reg = QLC_83XX_PORT0_THRESHOLD; + else if (j == 1) + reg = QLC_83XX_PORT1_THRESHOLD; + + for (i = 0; i < 8; i++) + QLCWR32(adapter, reg + (i * 0x4), 0x0); + } + + for (j = 0; j < 2; j++) { + if (j == 0) + reg = QLC_83XX_PORT0_TC_MC_REG; + else if (j == 1) + reg = QLC_83XX_PORT1_TC_MC_REG; + + for (i = 0; i < 4; i++) + QLCWR32(adapter, reg + (i * 0x4), 0x03FF03FF); + } + + QLCWR32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD, 0); + QLCWR32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD, 0); + dev_info(&adapter->pdev->dev, + "Disabled pause frames successfully on all ports\n"); + qlcnic_83xx_unlock_driver(adapter); +} + +static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev) +{ + u32 heartbeat, peg_status; + int retries, ret = -EIO; + + retries = QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT; + p_dev->heartbeat = QLC_SHARED_REG_RD32(p_dev, + QLCNIC_PEG_ALIVE_COUNTER); + + do { + msleep(QLCNIC_HEARTBEAT_PERIOD_MSECS); + heartbeat = QLC_SHARED_REG_RD32(p_dev, + QLCNIC_PEG_ALIVE_COUNTER); + if (heartbeat != p_dev->heartbeat) { + ret = QLCNIC_RCODE_SUCCESS; + break; + } + } while (--retries); + + if (ret) { + dev_err(&p_dev->pdev->dev, "firmware hang detected\n"); + qlcnic_83xx_disable_pause_frames(p_dev); + peg_status = QLC_SHARED_REG_RD32(p_dev, + QLCNIC_PEG_HALT_STATUS1); + dev_info(&p_dev->pdev->dev, "Dumping HW/FW registers\n" + "PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n" + "PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n" + "PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n" + "PEG_NET_4_PC: 0x%x\n", peg_status, + QLC_SHARED_REG_RD32(p_dev, QLCNIC_PEG_HALT_STATUS2), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_0), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_1), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_2), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_3), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_4)); + + if (QLCNIC_FWERROR_CODE(peg_status) == 0x67) + dev_err(&p_dev->pdev->dev, + "Device is being reset err code 0x00006700.\n"); + } + + return ret; +} + +static int qlcnic_83xx_check_cmd_peg_status(struct qlcnic_adapter *p_dev) +{ + int retries = QLCNIC_CMDPEG_CHECK_RETRY_COUNT; + u32 val; + + do { + val = QLC_SHARED_REG_RD32(p_dev, QLCNIC_CMDPEG_STATE); + if (val == QLC_83XX_CMDPEG_COMPLETE) + return 0; + msleep(QLCNIC_CMDPEG_CHECK_DELAY); + } while (--retries); + + dev_err(&p_dev->pdev->dev, "%s: failed, state = 0x%x\n", __func__, val); + return -EIO; +} + +int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev) +{ + int err; + + err = qlcnic_83xx_check_cmd_peg_status(p_dev); + if (err) + return err; + + err = qlcnic_83xx_check_heartbeat(p_dev); + if (err) + return err; + + return err; +} + +static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter) +{ + int err = -EIO; + + if (request_firmware(&adapter->ahw->fw_info.fw, + QLC_83XX_FW_FILE_NAME, &(adapter->pdev->dev))) { + dev_err(&adapter->pdev->dev, + "No file FW image, loading flash FW image.\n"); + QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, + QLC_83XX_BOOT_FROM_FLASH); + } else { + if (qlcnic_83xx_copy_fw_file(adapter)) + return err; + QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, + QLC_83XX_BOOT_FROM_FILE); + } + + return 0; +} + +static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) +{ + int err = -EIO; + + if (qlcnic_83xx_copy_bootloader(adapter)) + return err; + /* Boot either flash image or firmware image from host file system */ + if (qlcnic_load_fw_file) { + if (qlcnic_83xx_load_fw_image_from_host(adapter)) + return err; + } else { + QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, + QLC_83XX_BOOT_FROM_FLASH); + } + + if (qlcnic_83xx_check_hw_status(adapter)) + return -EIO; + + return 0; +} + +/** +* qlcnic_83xx_config_default_opmode +* +* @adapter: adapter structure +* +* Configure default driver operating mode +* +* Returns: Error code or Success(0) +* */ +int qlcnic_83xx_config_default_opmode(struct qlcnic_adapter *adapter) +{ + u32 op_mode; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + qlcnic_get_func_no(adapter); + op_mode = QLCRDX(ahw, QLC_83XX_DRV_OP_MODE); + + if (op_mode == QLC_83XX_DEFAULT_OPMODE) { + adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver; + ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry; + } else { + return -EIO; + } + + return 0; +} + +int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter) +{ + int err; + struct qlcnic_info nic_info; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + memset(&nic_info, 0, sizeof(struct qlcnic_info)); + err = qlcnic_get_nic_info(adapter, &nic_info, ahw->pci_func); + if (err) + return -EIO; + + ahw->physical_port = (u8) nic_info.phys_port; + ahw->switch_mode = nic_info.switch_mode; + ahw->max_tx_ques = nic_info.max_tx_ques; + ahw->max_rx_ques = nic_info.max_rx_ques; + ahw->capabilities = nic_info.capabilities; + ahw->max_mac_filters = nic_info.max_mac_filters; + ahw->max_mtu = nic_info.max_mtu; + + if (ahw->capabilities & BIT_23) + ahw->nic_mode = QLC_83XX_VIRTUAL_NIC_MODE; + else + ahw->nic_mode = QLC_83XX_DEFAULT_MODE; + + return ahw->nic_mode; +} + +static int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter) +{ + int ret; + + ret = qlcnic_83xx_get_nic_configuration(adapter); + if (ret == -EIO) + return -EIO; + + if (ret == QLC_83XX_DEFAULT_MODE) { + if (qlcnic_83xx_config_default_opmode(adapter)) + return -EIO; + } + + return 0; +} + +static void qlcnic_83xx_config_buff_descriptors(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (ahw->port_type == QLCNIC_XGBE) { + adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G; + adapter->max_rxd = MAX_RCV_DESCRIPTORS_10G; + adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G; + adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G; + + } else if (ahw->port_type == QLCNIC_GBE) { + adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G; + adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G; + adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G; + adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G; + } + adapter->num_txd = MAX_CMD_DESCRIPTORS; + adapter->max_rds_rings = MAX_RDS_RINGS; +} + +static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter) +{ + int err = -EIO; + + if (qlcnic_83xx_get_port_info(adapter)) + return err; + + qlcnic_83xx_config_buff_descriptors(adapter); + adapter->ahw->msix_supported = !!qlcnic_use_msi_x; + adapter->flags |= QLCNIC_ADAPTER_INITIALIZED; + + dev_info(&adapter->pdev->dev, "HAL Version: %d\n", + adapter->ahw->fw_hal_version); + + return 0; +} + +#define IS_QLC_83XX_USED(a, b, c) (((1 << a->portnum) & b) || ((c >> 6) & 0x1)) +static void qlcnic_83xx_clear_function_resources(struct qlcnic_adapter *adapter) +{ + struct qlcnic_cmd_args cmd; + u32 presence_mask, audit_mask; + int status; + + presence_mask = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); + audit_mask = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT); + + if (IS_QLC_83XX_USED(adapter, presence_mask, audit_mask)) { + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_STOP_NIC_FUNC); + cmd.req.arg[1] = BIT_31; + status = qlcnic_issue_cmd(adapter, &cmd); + if (status) + dev_err(&adapter->pdev->dev, + "Failed to clean up the function resources\n"); + qlcnic_free_mbx_args(&cmd); + } +} + +int qlcnic_83xx_init(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (qlcnic_83xx_check_hw_status(adapter)) + return -EIO; + + /* Initilaize 83xx mailbox spinlock */ + spin_lock_init(&ahw->mbx_lock); + + set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); + qlcnic_83xx_clear_function_resources(adapter); + + if (!qlcnic_83xx_read_flash_descriptor_table(adapter)) + qlcnic_83xx_read_flash_mfg_id(adapter); + + if (qlcnic_83xx_idc_init(adapter)) + return -EIO; + + /* Configure default, SR-IOV or Virtual NIC mode of operation */ + if (qlcnic_83xx_configure_opmode(adapter)) + return -EIO; + + /* Perform operating mode specific initialization */ + if (adapter->nic_ops->init_driver(adapter)) + return -EIO; + + INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work); + + /* register for NIC IDC AEN Events */ + qlcnic_83xx_register_nic_idc_func(adapter, 1); + + /* Periodically monitor device status */ + qlcnic_83xx_idc_poll_dev_state(&adapter->fw_work.work); + + return adapter->ahw->idc.err_code; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 4a05dc0..c10670f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -39,23 +39,23 @@ static int qlcnic_mac_learn; module_param(qlcnic_mac_learn, int, 0444); MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)"); -static int qlcnic_use_msi = 1; +int qlcnic_use_msi = 1; MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled"); module_param_named(use_msi, qlcnic_use_msi, int, 0444); -static int qlcnic_use_msi_x = 1; +int qlcnic_use_msi_x = 1; MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled"); module_param_named(use_msi_x, qlcnic_use_msi_x, int, 0444); -static int qlcnic_auto_fw_reset = 1; +int qlcnic_auto_fw_reset = 1; MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled"); module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644); -static int qlcnic_load_fw_file; +int qlcnic_load_fw_file; MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file"); module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444); -static int qlcnic_config_npars; +int qlcnic_config_npars; module_param(qlcnic_config_npars, int, 0444); MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled"); @@ -1294,9 +1294,7 @@ int __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) return 0; } -/* Usage: During resume and firmware recovery module.*/ - -static int qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) +int qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) { int err = 0; @@ -1340,8 +1338,7 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) /* Usage: During suspend and firmware recovery module */ -static void -qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) +void qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) { rtnl_lock(); if (netif_running(netdev)) @@ -1812,6 +1809,11 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } else if (qlcnic_83xx_check(adapter)) { qlcnic_83xx_check_vf(adapter, ent); adapter->portnum = adapter->ahw->pci_func; + err = qlcnic_83xx_init(adapter); + if (err) { + dev_err(&pdev->dev, "%s: failed\n", __func__); + goto err_out_free_hw; + } } else { dev_err(&pdev->dev, "%s: failed. Please Reboot\n", __func__); @@ -2135,7 +2137,7 @@ static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter) adapter->fhash.fmax = 0; } -static int qlcnic_check_temp(struct qlcnic_adapter *adapter) +int qlcnic_check_temp(struct qlcnic_adapter *adapter) { struct net_device *netdev = adapter->netdev; u32 temp_state, temp_val, temp = 0; -- cgit v0.10.2 From 81d0aeb0a4fff6c274f956644a837caac14a7c21 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:25 +0000 Subject: qlcnic: flash template based firmware reset recovery Flash template provides instructions to stop, restart and initalize the firmware. These instructions are abstracted as a series of read, write and poll operations on hardware registers. Register information and operation specifics are not exposed to the driver. Driver reads the template from flash and executes the instructions located at pre-defined offsets. Template based firmware reset recovery and initialization mechanism minimize driver changes as firmware evolves. Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 9a6d093..5b36d92 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -442,6 +442,7 @@ struct qlcnic_hardware_context { struct qlcnic_nic_intr_coalesce coal; struct qlcnic_fw_dump fw_dump; struct qlcnic_fdt fdt; + struct qlc_83xx_reset reset; struct qlc_83xx_idc idc; struct qlc_83xx_fw_info fw_info; struct qlcnic_intrpt_config *intr_tbl; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 8fdc4e6..9cd51cb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2343,3 +2343,43 @@ int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *adapter, u64 addr, return ret; } + +int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, + u8 *p_data, int count) +{ + int i, ret; + u32 word, addr = flash_addr; + ulong indirect_addr; + + if (qlcnic_83xx_lock_flash(adapter) != 0) + return -EIO; + + if (addr & 0x3) { + dev_err(&adapter->pdev->dev, "Illegal addr = 0x%x\n", addr); + qlcnic_83xx_unlock_flash(adapter); + return -EIO; + } + + for (i = 0; i < count; i++) { + if (qlcnic_83xx_wrt_reg_indirect(adapter, + QLC_83XX_FLASH_DIRECT_WINDOW, + (addr))) { + qlcnic_83xx_unlock_flash(adapter); + return -EIO; + } + + indirect_addr = QLC_83XX_FLASH_DIRECT_DATA(addr); + ret = qlcnic_83xx_rd_reg_indirect(adapter, + indirect_addr); + if (ret == -EIO) + return -EIO; + word = ret; + *p_data = word; + p_data = p_data + 4; + addr = addr + 4; + } + + qlcnic_83xx_unlock_flash(adapter); + + return 0; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 99b8427..969bda8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -77,6 +77,8 @@ #define QLC_83XX_BOOT_FROM_FLASH 0 #define QLC_83XX_BOOT_FROM_FILE 0x12345678 +#define QLC_83XX_MAX_RESET_SEQ_ENTRIES 16 + struct qlcnic_intrpt_config { u8 type; u8 enabled; @@ -98,6 +100,20 @@ struct qlc_83xx_fw_info { u8 load_from_file; }; +struct qlc_83xx_reset { + struct qlc_83xx_reset_hdr *hdr; + int seq_index; + int seq_error; + int array_index; + u32 array[QLC_83XX_MAX_RESET_SEQ_ENTRIES]; + u8 *buff; + u8 *stop_offset; + u8 *start_offset; + u8 *init_offset; + u8 seq_end; + u8 template_end; +}; + #define QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY 0x1 #define QLC_83XX_IDC_GRACEFULL_RESET 0x2 #define QLC_83XX_IDC_TIMESTAMP 0 @@ -377,6 +393,7 @@ int qlcnic_83xx_init(struct qlcnic_adapter *); int qlcnic_83xx_idc_ready_state_entry(struct qlcnic_adapter *); int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev); void qlcnic_83xx_idc_poll_dev_state(struct work_struct *); +int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *); void qlcnic_83xx_idc_exit(struct qlcnic_adapter *); void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *, u32); int qlcnic_83xx_lock_driver(struct qlcnic_adapter *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index c26d190..d222ee2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1,11 +1,77 @@ #include "qlcnic.h" #include "qlcnic_hw.h" +/* Reset template definitions */ +#define QLC_83XX_RESTART_TEMPLATE_SIZE 0x2000 +#define QLC_83XX_RESET_TEMPLATE_ADDR 0x4F0000 +#define QLC_83XX_RESET_SEQ_VERSION 0x0101 + +#define QLC_83XX_OPCODE_NOP 0x0000 +#define QLC_83XX_OPCODE_WRITE_LIST 0x0001 +#define QLC_83XX_OPCODE_READ_WRITE_LIST 0x0002 +#define QLC_83XX_OPCODE_POLL_LIST 0x0004 +#define QLC_83XX_OPCODE_POLL_WRITE_LIST 0x0008 +#define QLC_83XX_OPCODE_READ_MODIFY_WRITE 0x0010 +#define QLC_83XX_OPCODE_SEQ_PAUSE 0x0020 +#define QLC_83XX_OPCODE_SEQ_END 0x0040 +#define QLC_83XX_OPCODE_TMPL_END 0x0080 +#define QLC_83XX_OPCODE_POLL_READ_LIST 0x0100 + static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter); static int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter); static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev); static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter); +/* Template header */ +struct qlc_83xx_reset_hdr { + u16 version; + u16 signature; + u16 size; + u16 entries; + u16 hdr_size; + u16 checksum; + u16 init_offset; + u16 start_offset; +} __packed; + +/* Command entry header. */ +struct qlc_83xx_entry_hdr { + u16 cmd; + u16 size; + u16 count; + u16 delay; +} __packed; + +/* Generic poll command */ +struct qlc_83xx_poll { + u32 mask; + u32 status; +} __packed; + +/* Read modify write command */ +struct qlc_83xx_rmw { + u32 mask; + u32 xor_value; + u32 or_value; + u8 shl; + u8 shr; + u8 index_a; + u8 rsvd; +} __packed; + +/* Generic command with 2 DWORD */ +struct qlc_83xx_entry { + u32 arg1; + u32 arg2; +} __packed; + +/* Generic command with 4 DWORD */ +struct qlc_83xx_quad_entry { + u32 dr_addr; + u32 dr_value; + u32 ar_addr; + u32 ar_value; +} __packed; static const char *const qlc_83xx_idc_states[] = { "Unknown", "Cold", @@ -961,8 +1027,13 @@ qlcnic_83xx_idc_first_to_load_function_handler(struct qlcnic_adapter *adapter) static int qlcnic_83xx_idc_init(struct qlcnic_adapter *adapter) { + int ret = -EIO; + qlcnic_83xx_setup_idc_parameters(adapter); + if (qlcnic_83xx_get_reset_instruction_template(adapter)) + return ret; + if (!qlcnic_83xx_idc_check_driver_presence_reg(adapter)) { if (qlcnic_83xx_idc_first_to_load_function_handler(adapter)) return -EIO; @@ -1190,6 +1261,7 @@ static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) val, val1); } + static void qlcnic_83xx_disable_pause_frames(struct qlcnic_adapter *adapter) { u32 reg = 0, i, j; @@ -1305,6 +1377,409 @@ int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev) return err; } +static int qlcnic_83xx_poll_reg(struct qlcnic_adapter *p_dev, u32 addr, + int duration, u32 mask, u32 status) +{ + u32 value; + int timeout_error; + u8 retries; + + value = qlcnic_83xx_rd_reg_indirect(p_dev, addr); + retries = duration / 10; + + do { + if ((value & mask) != status) { + timeout_error = 1; + msleep(duration / 10); + value = qlcnic_83xx_rd_reg_indirect(p_dev, addr); + } else { + timeout_error = 0; + break; + } + } while (retries--); + + if (timeout_error) { + p_dev->ahw->reset.seq_error++; + dev_err(&p_dev->pdev->dev, + "%s: Timeout Err, entry_num = %d\n", + __func__, p_dev->ahw->reset.seq_index); + dev_err(&p_dev->pdev->dev, + "0x%08x 0x%08x 0x%08x\n", + value, mask, status); + } + + return timeout_error; +} + +static int qlcnic_83xx_reset_template_checksum(struct qlcnic_adapter *p_dev) +{ + u32 sum = 0; + u16 *buff = (u16 *)p_dev->ahw->reset.buff; + int count = p_dev->ahw->reset.hdr->size / sizeof(u16); + + while (count-- > 0) + sum += *buff++; + + while (sum >> 16) + sum = (sum & 0xFFFF) + (sum >> 16); + + if (~sum) { + return 0; + } else { + dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); + return -1; + } +} + +int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_dev) +{ + u8 *p_buff; + u32 addr, count; + struct qlcnic_hardware_context *ahw = p_dev->ahw; + + ahw->reset.seq_error = 0; + ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL); + + if (p_dev->ahw->reset.buff == NULL) { + dev_err(&p_dev->pdev->dev, + "%s: resource allocation failed\n", __func__); + return -ENOMEM; + } + p_buff = p_dev->ahw->reset.buff; + addr = QLC_83XX_RESET_TEMPLATE_ADDR; + count = sizeof(struct qlc_83xx_reset_hdr) / sizeof(u32); + + /* Copy template header from flash */ + if (qlcnic_83xx_flash_read32(p_dev, addr, p_buff, count)) { + dev_err(&p_dev->pdev->dev, "%s: flash read failed\n", __func__); + return -EIO; + } + ahw->reset.hdr = (struct qlc_83xx_reset_hdr *)ahw->reset.buff; + addr = QLC_83XX_RESET_TEMPLATE_ADDR + ahw->reset.hdr->hdr_size; + p_buff = ahw->reset.buff + ahw->reset.hdr->hdr_size; + count = (ahw->reset.hdr->size - ahw->reset.hdr->hdr_size) / sizeof(u32); + + /* Copy rest of the template */ + if (qlcnic_83xx_flash_read32(p_dev, addr, p_buff, count)) { + dev_err(&p_dev->pdev->dev, "%s: flash read failed\n", __func__); + return -EIO; + } + + if (qlcnic_83xx_reset_template_checksum(p_dev)) + return -EIO; + /* Get Stop, Start and Init command offsets */ + ahw->reset.init_offset = ahw->reset.buff + ahw->reset.hdr->init_offset; + ahw->reset.start_offset = ahw->reset.buff + + ahw->reset.hdr->start_offset; + ahw->reset.stop_offset = ahw->reset.buff + ahw->reset.hdr->hdr_size; + return 0; +} + +/* Read Write HW register command */ +static void qlcnic_83xx_read_write_crb_reg(struct qlcnic_adapter *p_dev, + u32 raddr, u32 waddr) +{ + int value; + + value = qlcnic_83xx_rd_reg_indirect(p_dev, raddr); + qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value); +} + +/* Read Modify Write HW register command */ +static void qlcnic_83xx_rmw_crb_reg(struct qlcnic_adapter *p_dev, + u32 raddr, u32 waddr, + struct qlc_83xx_rmw *p_rmw_hdr) +{ + int value; + + if (p_rmw_hdr->index_a) + value = p_dev->ahw->reset.array[p_rmw_hdr->index_a]; + else + value = qlcnic_83xx_rd_reg_indirect(p_dev, raddr); + + value &= p_rmw_hdr->mask; + value <<= p_rmw_hdr->shl; + value >>= p_rmw_hdr->shr; + value |= p_rmw_hdr->or_value; + value ^= p_rmw_hdr->xor_value; + qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value); +} + +/* Write HW register command */ +static void qlcnic_83xx_write_list(struct qlcnic_adapter *p_dev, + struct qlc_83xx_entry_hdr *p_hdr) +{ + int i; + struct qlc_83xx_entry *entry; + + entry = (struct qlc_83xx_entry *)((char *)p_hdr + + sizeof(struct qlc_83xx_entry_hdr)); + + for (i = 0; i < p_hdr->count; i++, entry++) { + qlcnic_83xx_wrt_reg_indirect(p_dev, entry->arg1, + entry->arg2); + if (p_hdr->delay) + udelay((u32)(p_hdr->delay)); + } +} + +/* Read and Write instruction */ +static void qlcnic_83xx_read_write_list(struct qlcnic_adapter *p_dev, + struct qlc_83xx_entry_hdr *p_hdr) +{ + int i; + struct qlc_83xx_entry *entry; + + entry = (struct qlc_83xx_entry *)((char *)p_hdr + + sizeof(struct qlc_83xx_entry_hdr)); + + for (i = 0; i < p_hdr->count; i++, entry++) { + qlcnic_83xx_read_write_crb_reg(p_dev, entry->arg1, + entry->arg2); + if (p_hdr->delay) + udelay((u32)(p_hdr->delay)); + } +} + +/* Poll HW register command */ +static void qlcnic_83xx_poll_list(struct qlcnic_adapter *p_dev, + struct qlc_83xx_entry_hdr *p_hdr) +{ + long delay; + struct qlc_83xx_entry *entry; + struct qlc_83xx_poll *poll; + int i; + unsigned long arg1, arg2; + + poll = (struct qlc_83xx_poll *)((char *)p_hdr + + sizeof(struct qlc_83xx_entry_hdr)); + + entry = (struct qlc_83xx_entry *)((char *)poll + + sizeof(struct qlc_83xx_poll)); + delay = (long)p_hdr->delay; + + if (!delay) { + for (i = 0; i < p_hdr->count; i++, entry++) + qlcnic_83xx_poll_reg(p_dev, entry->arg1, + delay, poll->mask, + poll->status); + } else { + for (i = 0; i < p_hdr->count; i++, entry++) { + arg1 = entry->arg1; + arg2 = entry->arg2; + if (delay) { + if (qlcnic_83xx_poll_reg(p_dev, + arg1, delay, + poll->mask, + poll->status)){ + qlcnic_83xx_rd_reg_indirect(p_dev, + arg1); + qlcnic_83xx_rd_reg_indirect(p_dev, + arg2); + } + } + } + } +} + +/* Poll and write HW register command */ +static void qlcnic_83xx_poll_write_list(struct qlcnic_adapter *p_dev, + struct qlc_83xx_entry_hdr *p_hdr) +{ + int i; + long delay; + struct qlc_83xx_quad_entry *entry; + struct qlc_83xx_poll *poll; + + poll = (struct qlc_83xx_poll *)((char *)p_hdr + + sizeof(struct qlc_83xx_entry_hdr)); + entry = (struct qlc_83xx_quad_entry *)((char *)poll + + sizeof(struct qlc_83xx_poll)); + delay = (long)p_hdr->delay; + + for (i = 0; i < p_hdr->count; i++, entry++) { + qlcnic_83xx_wrt_reg_indirect(p_dev, entry->dr_addr, + entry->dr_value); + qlcnic_83xx_wrt_reg_indirect(p_dev, entry->ar_addr, + entry->ar_value); + if (delay) + qlcnic_83xx_poll_reg(p_dev, entry->ar_addr, delay, + poll->mask, poll->status); + } +} + +/* Read Modify Write register command */ +static void qlcnic_83xx_read_modify_write(struct qlcnic_adapter *p_dev, + struct qlc_83xx_entry_hdr *p_hdr) +{ + int i; + struct qlc_83xx_entry *entry; + struct qlc_83xx_rmw *rmw_hdr; + + rmw_hdr = (struct qlc_83xx_rmw *)((char *)p_hdr + + sizeof(struct qlc_83xx_entry_hdr)); + + entry = (struct qlc_83xx_entry *)((char *)rmw_hdr + + sizeof(struct qlc_83xx_rmw)); + + for (i = 0; i < p_hdr->count; i++, entry++) { + qlcnic_83xx_rmw_crb_reg(p_dev, entry->arg1, + entry->arg2, rmw_hdr); + if (p_hdr->delay) + udelay((u32)(p_hdr->delay)); + } +} + +static void qlcnic_83xx_pause(struct qlc_83xx_entry_hdr *p_hdr) +{ + if (p_hdr->delay) + mdelay((u32)((long)p_hdr->delay)); +} + +/* Read and poll register command */ +static void qlcnic_83xx_poll_read_list(struct qlcnic_adapter *p_dev, + struct qlc_83xx_entry_hdr *p_hdr) +{ + long delay; + int index, i, j; + struct qlc_83xx_quad_entry *entry; + struct qlc_83xx_poll *poll; + unsigned long addr; + + poll = (struct qlc_83xx_poll *)((char *)p_hdr + + sizeof(struct qlc_83xx_entry_hdr)); + + entry = (struct qlc_83xx_quad_entry *)((char *)poll + + sizeof(struct qlc_83xx_poll)); + delay = (long)p_hdr->delay; + + for (i = 0; i < p_hdr->count; i++, entry++) { + qlcnic_83xx_wrt_reg_indirect(p_dev, entry->ar_addr, + entry->ar_value); + if (delay) { + if (!qlcnic_83xx_poll_reg(p_dev, entry->ar_addr, delay, + poll->mask, poll->status)){ + index = p_dev->ahw->reset.array_index; + addr = entry->dr_addr; + j = qlcnic_83xx_rd_reg_indirect(p_dev, addr); + p_dev->ahw->reset.array[index++] = j; + + if (index == QLC_83XX_MAX_RESET_SEQ_ENTRIES) + p_dev->ahw->reset.array_index = 1; + } + } + } +} + +static inline void qlcnic_83xx_seq_end(struct qlcnic_adapter *p_dev) +{ + p_dev->ahw->reset.seq_end = 1; +} + +static void qlcnic_83xx_template_end(struct qlcnic_adapter *p_dev) +{ + p_dev->ahw->reset.template_end = 1; + if (p_dev->ahw->reset.seq_error == 0) + dev_err(&p_dev->pdev->dev, + "HW restart process completed successfully.\n"); + else + dev_err(&p_dev->pdev->dev, + "HW restart completed with timeout errors.\n"); +} + +/** +* qlcnic_83xx_exec_template_cmd +* +* @p_dev: adapter structure +* @p_buff: Poiter to instruction template +* +* Template provides instructions to stop, restart and initalize firmware. +* These instructions are abstracted as a series of read, write and +* poll operations on hardware registers. Register information and operation +* specifics are not exposed to the driver. Driver reads the template from +* flash and executes the instructions located at pre-defined offsets. +* +* Returns: None +* */ +static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev, + char *p_buff) +{ + int index, entries; + struct qlc_83xx_entry_hdr *p_hdr; + char *entry = p_buff; + + p_dev->ahw->reset.seq_end = 0; + p_dev->ahw->reset.template_end = 0; + entries = p_dev->ahw->reset.hdr->entries; + index = p_dev->ahw->reset.seq_index; + + for (; (!p_dev->ahw->reset.seq_end) && (index < entries); index++) { + p_hdr = (struct qlc_83xx_entry_hdr *)entry; + + switch (p_hdr->cmd) { + case QLC_83XX_OPCODE_NOP: + break; + case QLC_83XX_OPCODE_WRITE_LIST: + qlcnic_83xx_write_list(p_dev, p_hdr); + break; + case QLC_83XX_OPCODE_READ_WRITE_LIST: + qlcnic_83xx_read_write_list(p_dev, p_hdr); + break; + case QLC_83XX_OPCODE_POLL_LIST: + qlcnic_83xx_poll_list(p_dev, p_hdr); + break; + case QLC_83XX_OPCODE_POLL_WRITE_LIST: + qlcnic_83xx_poll_write_list(p_dev, p_hdr); + break; + case QLC_83XX_OPCODE_READ_MODIFY_WRITE: + qlcnic_83xx_read_modify_write(p_dev, p_hdr); + break; + case QLC_83XX_OPCODE_SEQ_PAUSE: + qlcnic_83xx_pause(p_hdr); + break; + case QLC_83XX_OPCODE_SEQ_END: + qlcnic_83xx_seq_end(p_dev); + break; + case QLC_83XX_OPCODE_TMPL_END: + qlcnic_83xx_template_end(p_dev); + break; + case QLC_83XX_OPCODE_POLL_READ_LIST: + qlcnic_83xx_poll_read_list(p_dev, p_hdr); + break; + default: + dev_err(&p_dev->pdev->dev, + "%s: Unknown opcode 0x%04x in template %d\n", + __func__, p_hdr->cmd, index); + break; + } + entry += p_hdr->size; + } + p_dev->ahw->reset.seq_index = index; +} + +static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev) +{ + p_dev->ahw->reset.seq_index = 0; + + qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.stop_offset); + if (p_dev->ahw->reset.seq_end != 1) + dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); +} + +static void qlcnic_83xx_start_hw(struct qlcnic_adapter *p_dev) +{ + qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.start_offset); + if (p_dev->ahw->reset.template_end != 1) + dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); +} + +static void qlcnic_83xx_init_hw(struct qlcnic_adapter *p_dev) +{ + qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.init_offset); + if (p_dev->ahw->reset.seq_end != 1) + dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); +} + static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter) { int err = -EIO; @@ -1329,6 +1804,9 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) { int err = -EIO; + qlcnic_83xx_stop_hw(adapter); + qlcnic_83xx_init_hw(adapter); + if (qlcnic_83xx_copy_bootloader(adapter)) return err; /* Boot either flash image or firmware image from host file system */ @@ -1340,6 +1818,7 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) QLC_83XX_BOOT_FROM_FLASH); } + qlcnic_83xx_start_hw(adapter); if (qlcnic_83xx_check_hw_status(adapter)) return -EIO; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index c10670f..c71e1dc 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1473,6 +1473,7 @@ static void qlcnic_free_adapter_resources(struct qlcnic_adapter *adapter) adapter->ahw->fw_dump.tmpl_hdr = NULL; } + kfree(adapter->ahw->reset.buff); adapter->ahw->fw_dump.tmpl_hdr = NULL; } -- cgit v0.10.2 From d71170fb9d54833c4b26b1bf9ab5a077f1d65324 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:26 +0000 Subject: qlcnic: enable 83xx virtual NIC mode Enable 83xx virtual NIC mode Signed-off-by: Rajesh Borundia Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/Makefile b/drivers/net/ethernet/qlogic/qlcnic/Makefile index 799325d..25b73f1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/Makefile +++ b/drivers/net/ethernet/qlogic/qlcnic/Makefile @@ -7,4 +7,4 @@ obj-$(CONFIG_QLCNIC) := qlcnic.o qlcnic-y := qlcnic_hw.o qlcnic_main.o qlcnic_init.o \ qlcnic_ethtool.o qlcnic_ctx.o qlcnic_io.o \ qlcnic_sysfs.o qlcnic_minidump.o qlcnic_83xx_hw.o \ - qlcnic_83xx_init.o + qlcnic_83xx_init.o qlcnic_83xx_vnic.o diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 5b36d92..af8510b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1523,7 +1523,10 @@ int __qlcnic_up(struct qlcnic_adapter *, struct net_device *); void qlcnic_restore_indev_addr(struct net_device *, unsigned long); int qlcnic_check_temp(struct qlcnic_adapter *); - +int qlcnic_init_pci_info(struct qlcnic_adapter *); +int qlcnic_set_default_offload_settings(struct qlcnic_adapter *); +int qlcnic_reset_npar_config(struct qlcnic_adapter *); +int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *); /* * QLOGIC Board information */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 969bda8..f378d21 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -400,4 +400,11 @@ int qlcnic_83xx_lock_driver(struct qlcnic_adapter *); void qlcnic_83xx_unlock_driver(struct qlcnic_adapter *); int qlcnic_83xx_set_default_offload_settings(struct qlcnic_adapter *); int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *, u64, u32 *, u32); +int qlcnic_83xx_idc_vnic_pf_entry(struct qlcnic_adapter *); +int qlcnic_83xx_enable_vnic_mode(struct qlcnic_adapter *, int); +int qlcnic_83xx_disable_vnic_mode(struct qlcnic_adapter *, int); +int qlcnic_83xx_config_vnic_opmode(struct qlcnic_adapter *); +int qlcnic_83xx_get_vnic_vport_info(struct qlcnic_adapter *, + struct qlcnic_info *, u8); +int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index d222ee2..b14fb83 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -643,6 +643,52 @@ int qlcnic_83xx_idc_ready_state_entry(struct qlcnic_adapter *adapter) return 0; } +/** + * qlcnic_83xx_idc_vnic_pf_entry + * + * @adapter: adapter structure + * + * Ensure vNIC mode privileged function starts only after vNIC mode is + * enabled by management function. + * If vNIC mode is ready, start initialization. + * + * Returns: -EIO or 0 + * + **/ +int qlcnic_83xx_idc_vnic_pf_entry(struct qlcnic_adapter *adapter) +{ + u32 state; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + /* Privileged function waits till mgmt function enables VNIC mode */ + state = QLCRDX(adapter->ahw, QLC_83XX_VNIC_STATE); + if (state != QLCNIC_DEV_NPAR_OPER) { + if (!ahw->idc.vnic_wait_limit--) { + qlcnic_83xx_idc_enter_failed_state(adapter, 1); + return -EIO; + } + dev_info(&adapter->pdev->dev, "vNIC mode disabled\n"); + return -EIO; + + } else { + /* Perform one time initialization from ready state */ + if (ahw->idc.vnic_state != QLCNIC_DEV_NPAR_OPER) { + qlcnic_83xx_idc_update_idc_params(adapter); + + /* If the previous state is UNKNOWN, device will be + already attached properly by Init routine*/ + if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_UNKNOWN) { + if (qlcnic_83xx_idc_reattach_driver(adapter)) + return -EIO; + } + adapter->ahw->idc.vnic_state = QLCNIC_DEV_NPAR_OPER; + dev_info(&adapter->pdev->dev, "vNIC mode enabled\n"); + } + } + + return 0; +} + static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter) { adapter->ahw->idc.err_code = -EIO; @@ -802,6 +848,8 @@ static int qlcnic_83xx_idc_need_reset_state(struct qlcnic_adapter *adapter) qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); set_bit(__QLCNIC_RESETTING, &adapter->state); clear_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); + if (adapter->ahw->nic_mode == QLC_83XX_VIRTUAL_NIC_MODE) + qlcnic_83xx_disable_vnic_mode(adapter, 1); qlcnic_83xx_idc_detach_driver(adapter); } @@ -1887,7 +1935,10 @@ static int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter) if (ret == -EIO) return -EIO; - if (ret == QLC_83XX_DEFAULT_MODE) { + if (ret == QLC_83XX_VIRTUAL_NIC_MODE) { + if (qlcnic_83xx_config_vnic_opmode(adapter)) + return -EIO; + } else if (ret == QLC_83XX_DEFAULT_MODE) { if (qlcnic_83xx_config_default_opmode(adapter)) return -EIO; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c new file mode 100644 index 0000000..d394471 --- /dev/null +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c @@ -0,0 +1,216 @@ +#include "qlcnic.h" +#include "qlcnic_hw.h" + +int qlcnic_83xx_enable_vnic_mode(struct qlcnic_adapter *adapter, int lock) +{ + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + QLCWRX(adapter->ahw, QLC_83XX_VNIC_STATE, QLCNIC_DEV_NPAR_OPER); + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +int qlcnic_83xx_disable_vnic_mode(struct qlcnic_adapter *adapter, int lock) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (lock) { + if (qlcnic_83xx_lock_driver(adapter)) + return -EBUSY; + } + + QLCWRX(adapter->ahw, QLC_83XX_VNIC_STATE, QLCNIC_DEV_NPAR_NON_OPER); + ahw->idc.vnic_state = QLCNIC_DEV_NPAR_NON_OPER; + + if (lock) + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static int qlcnic_83xx_set_vnic_opmode(struct qlcnic_adapter *adapter) +{ + u8 id; + int i, ret = -EBUSY; + u32 data = QLCNIC_MGMT_FUNC; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (qlcnic_83xx_lock_driver(adapter)) + return ret; + + if (qlcnic_config_npars) { + for (i = 0; i < ahw->act_pci_func; i++) { + id = adapter->npars[i].pci_func; + if (id == ahw->pci_func) + continue; + data |= qlcnic_config_npars & + QLC_83XX_SET_FUNC_OPMODE(0x3, id); + } + } else { + data = QLCRDX(adapter->ahw, QLC_83XX_DRV_OP_MODE); + data = (data & ~QLC_83XX_SET_FUNC_OPMODE(0x3, ahw->pci_func)) | + QLC_83XX_SET_FUNC_OPMODE(QLCNIC_MGMT_FUNC, + ahw->pci_func); + } + QLCWRX(adapter->ahw, QLC_83XX_DRV_OP_MODE, data); + + qlcnic_83xx_unlock_driver(adapter); + + return 0; +} + +static void +qlcnic_83xx_config_vnic_buff_descriptors(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (ahw->port_type == QLCNIC_XGBE) { + adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_VF; + adapter->max_rxd = MAX_RCV_DESCRIPTORS_VF; + adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G; + adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G; + + } else if (ahw->port_type == QLCNIC_GBE) { + adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G; + adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G; + adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G; + adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G; + } + adapter->num_txd = MAX_CMD_DESCRIPTORS; + adapter->max_rds_rings = MAX_RDS_RINGS; +} + + +/** + * qlcnic_83xx_init_mgmt_vnic + * + * @adapter: adapter structure + * Management virtual NIC sets the operational mode of other vNIC's and + * configures embedded switch (ESWITCH). + * Returns: Success(0) or error code. + * + **/ +static int qlcnic_83xx_init_mgmt_vnic(struct qlcnic_adapter *adapter) +{ + int err = -EIO; + + if (!(adapter->flags & QLCNIC_ADAPTER_INITIALIZED)) { + if (qlcnic_init_pci_info(adapter)) + return err; + + if (qlcnic_83xx_set_vnic_opmode(adapter)) + return err; + + if (qlcnic_set_default_offload_settings(adapter)) + return err; + } else { + if (qlcnic_reset_npar_config(adapter)) + return err; + } + + if (qlcnic_83xx_get_port_info(adapter)) + return err; + + qlcnic_83xx_config_vnic_buff_descriptors(adapter); + adapter->ahw->msix_supported = !!qlcnic_use_msi_x; + adapter->flags |= QLCNIC_ADAPTER_INITIALIZED; + qlcnic_83xx_enable_vnic_mode(adapter, 1); + + dev_info(&adapter->pdev->dev, "HAL Version: %d, Management function\n", + adapter->ahw->fw_hal_version); + + return 0; +} + +static int qlcnic_83xx_init_privileged_vnic(struct qlcnic_adapter *adapter) +{ + int err = -EIO; + + if (qlcnic_83xx_get_port_info(adapter)) + return err; + + qlcnic_83xx_config_vnic_buff_descriptors(adapter); + adapter->ahw->msix_supported = !!qlcnic_use_msi_x; + adapter->flags |= QLCNIC_ADAPTER_INITIALIZED; + + dev_info(&adapter->pdev->dev, + "HAL Version: %d, Privileged function\n", + adapter->ahw->fw_hal_version); + return 0; +} + +static int qlcnic_83xx_init_non_privileged_vnic(struct qlcnic_adapter *adapter) +{ + int err = -EIO; + + qlcnic_83xx_get_fw_version(adapter); + if (qlcnic_set_eswitch_port_config(adapter)) + return err; + + if (qlcnic_83xx_get_port_info(adapter)) + return err; + + qlcnic_83xx_config_vnic_buff_descriptors(adapter); + adapter->ahw->msix_supported = !!qlcnic_use_msi_x; + adapter->flags |= QLCNIC_ADAPTER_INITIALIZED; + + dev_info(&adapter->pdev->dev, "HAL Version: %d, Virtual function\n", + adapter->ahw->fw_hal_version); + + return 0; +} + +/** + * qlcnic_83xx_vnic_opmode + * + * @adapter: adapter structure + * Identify virtual NIC operational modes. + * + * Returns: Success(0) or error code. + * + **/ +int qlcnic_83xx_config_vnic_opmode(struct qlcnic_adapter *adapter) +{ + u32 op_mode, priv_level; + struct qlcnic_hardware_context *ahw = adapter->ahw; + struct qlcnic_nic_template *nic_ops = adapter->nic_ops; + + qlcnic_get_func_no(adapter); + op_mode = QLCRDX(adapter->ahw, QLC_83XX_DRV_OP_MODE); + + if (op_mode == QLC_83XX_DEFAULT_OPMODE) + priv_level = QLCNIC_MGMT_FUNC; + else + priv_level = QLC_83XX_GET_FUNC_PRIVILEGE(op_mode, + ahw->pci_func); + + if (priv_level == QLCNIC_NON_PRIV_FUNC) { + ahw->op_mode = QLCNIC_NON_PRIV_FUNC; + ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry; + nic_ops->init_driver = qlcnic_83xx_init_non_privileged_vnic; + } else if (priv_level == QLCNIC_PRIV_FUNC) { + ahw->op_mode = QLCNIC_PRIV_FUNC; + ahw->idc.state_entry = qlcnic_83xx_idc_vnic_pf_entry; + nic_ops->init_driver = qlcnic_83xx_init_privileged_vnic; + } else if (priv_level == QLCNIC_MGMT_FUNC) { + ahw->op_mode = QLCNIC_MGMT_FUNC; + ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry; + nic_ops->init_driver = qlcnic_83xx_init_mgmt_vnic; + } else { + return -EIO; + } + + if (ahw->capabilities & BIT_23) + adapter->flags |= QLCNIC_ESWITCH_ENABLED; + else + adapter->flags &= ~QLCNIC_ESWITCH_ENABLED; + + adapter->ahw->idc.vnic_state = QLCNIC_DEV_NPAR_NON_OPER; + adapter->ahw->idc.vnic_wait_limit = QLCNIC_DEV_NPAR_OPER_TIMEO; + + return 0; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index c71e1dc..da04432 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -502,7 +502,8 @@ static int qlcnic_get_act_pci_func(struct qlcnic_adapter *adapter) kfree(pci_info); return ret; } -static int qlcnic_init_pci_info(struct qlcnic_adapter *adapter) + +int qlcnic_init_pci_info(struct qlcnic_adapter *adapter) { struct qlcnic_pci_info *pci_info; int i, ret = 0, j = 0; @@ -851,7 +852,7 @@ void qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter, qlcnic_set_netdev_features(adapter, esw_cfg); } -static int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter) +int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter) { struct qlcnic_esw_func_cfg esw_cfg; @@ -950,7 +951,7 @@ qlcnic_check_eswitch_mode(struct qlcnic_adapter *adapter) return err; } -static int qlcnic_set_default_offload_settings(struct qlcnic_adapter *adapter) +int qlcnic_set_default_offload_settings(struct qlcnic_adapter *adapter) { struct qlcnic_esw_func_cfg esw_cfg; struct qlcnic_npar_info *npar; @@ -1007,7 +1008,7 @@ qlcnic_reset_eswitch_config(struct qlcnic_adapter *adapter, return 0; } -static int qlcnic_reset_npar_config(struct qlcnic_adapter *adapter) +int qlcnic_reset_npar_config(struct qlcnic_adapter *adapter) { int i, err; struct qlcnic_npar_info *npar; -- cgit v0.10.2 From 4e60ac46414b2815d6e37e76fe6e3fb6dc4843c7 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:27 +0000 Subject: qlcnic: 83xx register dump routines Add 83xx register dump routines Update 82xx register dump routines Signed-off-by: Anirban Chakraborty Signed-off-by: Rajesh Borundia Signed-off-by: Sritej Velaga Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/Makefile b/drivers/net/ethernet/qlogic/qlcnic/Makefile index 25b73f1..7722a20 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/Makefile +++ b/drivers/net/ethernet/qlogic/qlcnic/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_QLCNIC) := qlcnic.o qlcnic-y := qlcnic_hw.o qlcnic_main.o qlcnic_init.o \ qlcnic_ethtool.o qlcnic_ctx.o qlcnic_io.o \ qlcnic_sysfs.o qlcnic_minidump.o qlcnic_83xx_hw.o \ - qlcnic_83xx_init.o qlcnic_83xx_vnic.o + qlcnic_83xx_init.o qlcnic_83xx_vnic.o \ + qlcnic_minidump.o diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index af8510b..1898b2f8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -375,6 +375,7 @@ struct qlcnic_dump_template_hdr { u32 sys_info[3]; u32 saved_state[16]; u32 cap_sizes[8]; + u32 ocm_wnd_reg[16]; u32 rsvd[0]; }; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index f378d21..cd12861 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -407,4 +407,6 @@ int qlcnic_83xx_config_vnic_opmode(struct qlcnic_adapter *); int qlcnic_83xx_get_vnic_vport_info(struct qlcnic_adapter *, struct qlcnic_info *, u8); int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *); + +void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index b14fb83..c9e24a8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1850,9 +1850,15 @@ static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter) static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) { + u32 val; int err = -EIO; qlcnic_83xx_stop_hw(adapter); + + /* Collect FW register dump if required */ + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + if (!(val & QLC_83XX_IDC_GRACEFULL_RESET)) + qlcnic_dump_fw(adapter); qlcnic_83xx_init_hw(adapter); if (qlcnic_83xx_copy_bootloader(adapter)) @@ -1970,6 +1976,7 @@ static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter) { int err = -EIO; + qlcnic_83xx_get_minidump_template(adapter); if (qlcnic_83xx_get_port_info(adapter)) return err; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 3098a14..ee68fe3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -160,40 +160,6 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, return cmd->rsp.arg[0]; } -int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter) -{ - int err = 0; - void *tmp_addr; - struct qlcnic_cmd_args cmd; - dma_addr_t tmp_addr_t = 0; - - tmp_addr = dma_alloc_coherent(&adapter->pdev->dev, 0x1000, - &tmp_addr_t, GFP_KERNEL); - if (!tmp_addr) { - dev_err(&adapter->pdev->dev, - "Can't get memory for FW dump template\n"); - return -ENOMEM; - } - - if (qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_TEMP_HDR)) { - err = -ENOMEM; - goto free_mem; - } - - cmd.req.arg[1] = LSD(tmp_addr_t); - cmd.req.arg[2] = MSD(tmp_addr_t); - cmd.req.arg[3] = 0x1000; - err = qlcnic_issue_cmd(adapter, &cmd); - - - qlcnic_free_mbx_args(&cmd); - -free_mem: - dma_free_coherent(&adapter->pdev->dev, 0x1000, tmp_addr, tmp_addr_t); - - return err; -} - int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c index 0b8d862..6281cbd 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c @@ -1,8 +1,19 @@ + #include "qlcnic.h" #include "qlcnic_hdr.h" +#include "qlcnic_83xx_hw.h" +#include "qlcnic_hw.h" #include +#define QLC_83XX_MINIDUMP_FLASH 0x520000 +#define QLC_83XX_OCM_INDEX 3 +#define QLC_83XX_PCI_INDEX 0 + +static const u32 qlcnic_ms_read_data[] = { + 0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC +}; + #define QLCNIC_DUMP_WCRB BIT_0 #define QLCNIC_DUMP_RWCRB BIT_1 #define QLCNIC_DUMP_ANDCRB BIT_2 @@ -102,16 +113,55 @@ struct __queue { u8 rsvd3[2]; } __packed; +struct __pollrd { + u32 sel_addr; + u32 read_addr; + u32 sel_val; + u16 sel_val_stride; + u16 no_ops; + u32 poll_wait; + u32 poll_mask; + u32 data_size; + u8 rsvd[4]; +} __packed; + +struct __mux2 { + u32 sel_addr1; + u32 sel_addr2; + u32 sel_val1; + u32 sel_val2; + u32 no_ops; + u32 sel_val_mask; + u32 read_addr; + u8 sel_val_stride; + u8 data_size; + u8 rsvd[2]; +} __packed; + +struct __pollrdmwr { + u32 addr1; + u32 addr2; + u32 val1; + u32 val2; + u32 poll_wait; + u32 poll_mask; + u32 mod_mask; + u32 data_size; +} __packed; + struct qlcnic_dump_entry { struct qlcnic_common_entry_hdr hdr; union { - struct __crb crb; - struct __cache cache; - struct __ocm ocm; - struct __mem mem; - struct __mux mux; - struct __queue que; - struct __ctrl ctrl; + struct __crb crb; + struct __cache cache; + struct __ocm ocm; + struct __mem mem; + struct __mux mux; + struct __queue que; + struct __ctrl ctrl; + struct __pollrdmwr pollrdmwr; + struct __mux2 mux2; + struct __pollrd pollrd; } region; } __packed; @@ -131,6 +181,9 @@ enum qlcnic_minidump_opcode { QLCNIC_DUMP_L2_ITAG = 22, QLCNIC_DUMP_L2_DATA = 23, QLCNIC_DUMP_L2_INST = 24, + QLCNIC_DUMP_POLL_RD = 35, + QLCNIC_READ_MUX2 = 36, + QLCNIC_READ_POLLRDMWR = 37, QLCNIC_DUMP_READ_ROM = 71, QLCNIC_DUMP_READ_MEM = 72, QLCNIC_DUMP_READ_CTRL = 98, @@ -144,46 +197,17 @@ struct qlcnic_dump_operations { __le32 *); }; -static void qlcnic_read_dump_reg(u32 addr, void __iomem *bar0, u32 *data) -{ - u32 dest; - void __iomem *window_reg; - - dest = addr & 0xFFFF0000; - window_reg = bar0 + QLCNIC_FW_DUMP_REG1; - writel(dest, window_reg); - readl(window_reg); - window_reg = bar0 + QLCNIC_FW_DUMP_REG2 + LSW(addr); - *data = readl(window_reg); -} - -static void qlcnic_write_dump_reg(u32 addr, void __iomem *bar0, u32 data) -{ - u32 dest; - void __iomem *window_reg; - - dest = addr & 0xFFFF0000; - window_reg = bar0 + QLCNIC_FW_DUMP_REG1; - writel(dest, window_reg); - readl(window_reg); - window_reg = bar0 + QLCNIC_FW_DUMP_REG2 + LSW(addr); - writel(data, window_reg); - readl(window_reg); -} - -/* FW dump related functions */ static u32 qlcnic_dump_crb(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry, __le32 *buffer) { int i; u32 addr, data; struct __crb *crb = &entry->region.crb; - void __iomem *base = adapter->ahw->pci_base0; addr = crb->addr; for (i = 0; i < crb->no_ops; i++) { - qlcnic_read_dump_reg(addr, base, &data); + data = qlcnic_ind_rd(adapter, addr); *buffer++ = cpu_to_le32(addr); *buffer++ = cpu_to_le32(data); addr += crb->stride; @@ -195,7 +219,6 @@ static u32 qlcnic_dump_ctrl(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry, __le32 *buffer) { int i, k, timeout = 0; - void __iomem *base = adapter->ahw->pci_base0; u32 addr, data; u8 no_ops; struct __ctrl *ctr = &entry->region.ctrl; @@ -211,28 +234,28 @@ static u32 qlcnic_dump_ctrl(struct qlcnic_adapter *adapter, continue; switch (1 << k) { case QLCNIC_DUMP_WCRB: - qlcnic_write_dump_reg(addr, base, ctr->val1); + qlcnic_ind_wr(adapter, addr, ctr->val1); break; case QLCNIC_DUMP_RWCRB: - qlcnic_read_dump_reg(addr, base, &data); - qlcnic_write_dump_reg(addr, base, data); + data = qlcnic_ind_rd(adapter, addr); + qlcnic_ind_wr(adapter, addr, data); break; case QLCNIC_DUMP_ANDCRB: - qlcnic_read_dump_reg(addr, base, &data); - qlcnic_write_dump_reg(addr, base, - data & ctr->val2); + data = qlcnic_ind_rd(adapter, addr); + qlcnic_ind_wr(adapter, addr, + (data & ctr->val2)); break; case QLCNIC_DUMP_ORCRB: - qlcnic_read_dump_reg(addr, base, &data); - qlcnic_write_dump_reg(addr, base, - data | ctr->val3); + data = qlcnic_ind_rd(adapter, addr); + qlcnic_ind_wr(adapter, addr, + (data | ctr->val3)); break; case QLCNIC_DUMP_POLLCRB: while (timeout <= ctr->timeout) { - qlcnic_read_dump_reg(addr, base, &data); + data = qlcnic_ind_rd(adapter, addr); if ((data & ctr->val2) == ctr->val1) break; - msleep(1); + usleep_range(1000, 2000); timeout++; } if (timeout > ctr->timeout) { @@ -244,7 +267,7 @@ static u32 qlcnic_dump_ctrl(struct qlcnic_adapter *adapter, case QLCNIC_DUMP_RD_SAVE: if (ctr->index_a) addr = t_hdr->saved_state[ctr->index_a]; - qlcnic_read_dump_reg(addr, base, &data); + data = qlcnic_ind_rd(adapter, addr); t_hdr->saved_state[ctr->index_v] = data; break; case QLCNIC_DUMP_WRT_SAVED: @@ -254,7 +277,7 @@ static u32 qlcnic_dump_ctrl(struct qlcnic_adapter *adapter, data = ctr->val1; if (ctr->index_a) addr = t_hdr->saved_state[ctr->index_a]; - qlcnic_write_dump_reg(addr, base, data); + qlcnic_ind_wr(adapter, addr, data); break; case QLCNIC_DUMP_MOD_SAVE_ST: data = t_hdr->saved_state[ctr->index_v]; @@ -283,12 +306,11 @@ static u32 qlcnic_dump_mux(struct qlcnic_adapter *adapter, int loop; u32 val, data = 0; struct __mux *mux = &entry->region.mux; - void __iomem *base = adapter->ahw->pci_base0; val = mux->val; for (loop = 0; loop < mux->no_ops; loop++) { - qlcnic_write_dump_reg(mux->addr, base, val); - qlcnic_read_dump_reg(mux->read_addr, base, &data); + qlcnic_ind_wr(adapter, mux->addr, val); + data = qlcnic_ind_rd(adapter, mux->read_addr); *buffer++ = cpu_to_le32(val); *buffer++ = cpu_to_le32(data); val += mux->val_stride; @@ -301,17 +323,16 @@ static u32 qlcnic_dump_que(struct qlcnic_adapter *adapter, { int i, loop; u32 cnt, addr, data, que_id = 0; - void __iomem *base = adapter->ahw->pci_base0; struct __queue *que = &entry->region.que; addr = que->read_addr; cnt = que->read_addr_cnt; for (loop = 0; loop < que->no_ops; loop++) { - qlcnic_write_dump_reg(que->sel_addr, base, que_id); + qlcnic_ind_wr(adapter, que->sel_addr, que_id); addr = que->read_addr; for (i = 0; i < cnt; i++) { - qlcnic_read_dump_reg(addr, base, &data); + data = qlcnic_ind_rd(adapter, addr); *buffer++ = cpu_to_le32(data); addr += que->read_addr_stride; } @@ -343,27 +364,27 @@ static u32 qlcnic_read_rom(struct qlcnic_adapter *adapter, int i, count = 0; u32 fl_addr, size, val, lck_val, addr; struct __mem *rom = &entry->region.mem; - void __iomem *base = adapter->ahw->pci_base0; fl_addr = rom->addr; - size = rom->size/4; + size = rom->size / 4; lock_try: - lck_val = readl(base + QLCNIC_FLASH_SEM2_LK); + lck_val = QLC_SHARED_REG_RD32(adapter, QLCNIC_FLASH_LOCK); if (!lck_val && count < MAX_CTL_CHECK) { - msleep(10); + usleep_range(10000, 11000); count++; goto lock_try; } - writel(adapter->ahw->pci_func, (base + QLCNIC_FLASH_LOCK_ID)); + QLC_SHARED_REG_WR32(adapter, QLCNIC_FLASH_LOCK_OWNER, + adapter->ahw->pci_func); for (i = 0; i < size; i++) { addr = fl_addr & 0xFFFF0000; - qlcnic_write_dump_reg(FLASH_ROM_WINDOW, base, addr); + qlcnic_ind_wr(adapter, FLASH_ROM_WINDOW, addr); addr = LSW(fl_addr) + FLASH_ROM_DATA; - qlcnic_read_dump_reg(addr, base, &val); + val = qlcnic_ind_rd(adapter, addr); fl_addr += 4; *buffer++ = cpu_to_le32(val); } - readl(base + QLCNIC_FLASH_SEM2_ULK); + QLC_SHARED_REG_RD32(adapter, QLCNIC_FLASH_UNLOCK); return rom->size; } @@ -372,18 +393,17 @@ static u32 qlcnic_dump_l1_cache(struct qlcnic_adapter *adapter, { int i; u32 cnt, val, data, addr; - void __iomem *base = adapter->ahw->pci_base0; struct __cache *l1 = &entry->region.cache; val = l1->init_tag_val; for (i = 0; i < l1->no_ops; i++) { - qlcnic_write_dump_reg(l1->addr, base, val); - qlcnic_write_dump_reg(l1->ctrl_addr, base, LSW(l1->ctrl_val)); + qlcnic_ind_wr(adapter, l1->addr, val); + qlcnic_ind_wr(adapter, l1->ctrl_addr, LSW(l1->ctrl_val)); addr = l1->read_addr; cnt = l1->read_addr_num; while (cnt) { - qlcnic_read_dump_reg(addr, base, &data); + data = qlcnic_ind_rd(adapter, addr); *buffer++ = cpu_to_le32(data); addr += l1->read_addr_stride; cnt--; @@ -399,7 +419,6 @@ static u32 qlcnic_dump_l2_cache(struct qlcnic_adapter *adapter, int i; u32 cnt, val, data, addr; u8 poll_mask, poll_to, time_out = 0; - void __iomem *base = adapter->ahw->pci_base0; struct __cache *l2 = &entry->region.cache; val = l2->init_tag_val; @@ -407,17 +426,17 @@ static u32 qlcnic_dump_l2_cache(struct qlcnic_adapter *adapter, poll_to = MSB(MSW(l2->ctrl_val)); for (i = 0; i < l2->no_ops; i++) { - qlcnic_write_dump_reg(l2->addr, base, val); + qlcnic_ind_wr(adapter, l2->addr, val); if (LSW(l2->ctrl_val)) - qlcnic_write_dump_reg(l2->ctrl_addr, base, - LSW(l2->ctrl_val)); + qlcnic_ind_wr(adapter, l2->ctrl_addr, + LSW(l2->ctrl_val)); if (!poll_mask) goto skip_poll; do { - qlcnic_read_dump_reg(l2->ctrl_addr, base, &data); + data = qlcnic_ind_rd(adapter, l2->ctrl_addr); if (!(data & poll_mask)) break; - msleep(1); + usleep_range(1000, 2000); time_out++; } while (time_out <= poll_to); @@ -431,7 +450,7 @@ skip_poll: addr = l2->read_addr; cnt = l2->read_addr_num; while (cnt) { - qlcnic_read_dump_reg(addr, base, &data); + data = qlcnic_ind_rd(adapter, addr); *buffer++ = cpu_to_le32(data); addr += l2->read_addr_stride; cnt--; @@ -447,7 +466,6 @@ static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter, u32 addr, data, test, ret = 0; int i, reg_read; struct __mem *mem = &entry->region.mem; - void __iomem *base = adapter->ahw->pci_base0; reg_read = mem->size; addr = mem->addr; @@ -462,13 +480,12 @@ static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter, mutex_lock(&adapter->ahw->mem_lock); while (reg_read != 0) { - qlcnic_write_dump_reg(MIU_TEST_ADDR_LO, base, addr); - qlcnic_write_dump_reg(MIU_TEST_ADDR_HI, base, 0); - qlcnic_write_dump_reg(MIU_TEST_CTR, base, - TA_CTL_ENABLE | TA_CTL_START); + qlcnic_ind_wr(adapter, QLCNIC_MS_ADDR_LO, addr); + qlcnic_ind_wr(adapter, QLCNIC_MS_ADDR_HI, 0); + qlcnic_ind_wr(adapter, QLCNIC_MS_CTRL, QLCNIC_TA_START_ENABLE); for (i = 0; i < MAX_CTL_CHECK; i++) { - qlcnic_read_dump_reg(MIU_TEST_CTR, base, &test); + test = qlcnic_ind_rd(adapter, QLCNIC_MS_CTRL); if (!(test & TA_CTL_BUSY)) break; } @@ -481,8 +498,7 @@ static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter, } } for (i = 0; i < 4; i++) { - qlcnic_read_dump_reg(MIU_TEST_READ_DATA[i], base, - &data); + data = qlcnic_ind_rd(adapter, qlcnic_ms_read_data[i]); *buffer++ = cpu_to_le32(data); } addr += 16; @@ -501,48 +517,388 @@ static u32 qlcnic_dump_nop(struct qlcnic_adapter *adapter, return 0; } -static const struct qlcnic_dump_operations fw_dump_ops[] = { - { QLCNIC_DUMP_NOP, qlcnic_dump_nop }, - { QLCNIC_DUMP_READ_CRB, qlcnic_dump_crb }, - { QLCNIC_DUMP_READ_MUX, qlcnic_dump_mux }, - { QLCNIC_DUMP_QUEUE, qlcnic_dump_que }, - { QLCNIC_DUMP_BRD_CONFIG, qlcnic_read_rom }, - { QLCNIC_DUMP_READ_OCM, qlcnic_dump_ocm }, - { QLCNIC_DUMP_PEG_REG, qlcnic_dump_ctrl }, - { QLCNIC_DUMP_L1_DTAG, qlcnic_dump_l1_cache }, - { QLCNIC_DUMP_L1_ITAG, qlcnic_dump_l1_cache }, - { QLCNIC_DUMP_L1_DATA, qlcnic_dump_l1_cache }, - { QLCNIC_DUMP_L1_INST, qlcnic_dump_l1_cache }, - { QLCNIC_DUMP_L2_DTAG, qlcnic_dump_l2_cache }, - { QLCNIC_DUMP_L2_ITAG, qlcnic_dump_l2_cache }, - { QLCNIC_DUMP_L2_DATA, qlcnic_dump_l2_cache }, - { QLCNIC_DUMP_L2_INST, qlcnic_dump_l2_cache }, - { QLCNIC_DUMP_READ_ROM, qlcnic_read_rom }, - { QLCNIC_DUMP_READ_MEM, qlcnic_read_memory }, - { QLCNIC_DUMP_READ_CTRL, qlcnic_dump_ctrl }, - { QLCNIC_DUMP_TLHDR, qlcnic_dump_nop }, - { QLCNIC_DUMP_RDEND, qlcnic_dump_nop }, -}; - -/* Walk the template and collect dump for each entry in the dump template */ -static int -qlcnic_valid_dump_entry(struct device *dev, struct qlcnic_dump_entry *entry, - u32 size) +static int qlcnic_valid_dump_entry(struct device *dev, + struct qlcnic_dump_entry *entry, u32 size) { int ret = 1; if (size != entry->hdr.cap_size) { - dev_info(dev, - "Invalid dump, Type:%d\tMask:%d\tSize:%dCap_size:%d\n", - entry->hdr.type, entry->hdr.mask, size, entry->hdr.cap_size); - dev_info(dev, "Aborting further dump capture\n"); + dev_err(dev, + "Invalid entry, Type:%d\tMask:%d\tSize:%dCap_size:%d\n", + entry->hdr.type, entry->hdr.mask, size, + entry->hdr.cap_size); ret = 0; } return ret; } +static u32 qlcnic_read_pollrdmwr(struct qlcnic_adapter *adapter, + struct qlcnic_dump_entry *entry, + __le32 *buffer) +{ + struct __pollrdmwr *poll = &entry->region.pollrdmwr; + u32 data, wait_count, poll_wait, temp; + + poll_wait = poll->poll_wait; + + qlcnic_ind_wr(adapter, poll->addr1, poll->val1); + wait_count = 0; + + while (wait_count < poll_wait) { + data = qlcnic_ind_rd(adapter, poll->addr1); + if ((data & poll->poll_mask) != 0) + break; + wait_count++; + } + + if (wait_count == poll_wait) { + dev_err(&adapter->pdev->dev, + "Timeout exceeded in %s, aborting dump\n", + __func__); + return 0; + } + + data = qlcnic_ind_rd(adapter, poll->addr2) & poll->mod_mask; + qlcnic_ind_wr(adapter, poll->addr2, data); + qlcnic_ind_wr(adapter, poll->addr1, poll->val2); + wait_count = 0; + + while (wait_count < poll_wait) { + temp = qlcnic_ind_rd(adapter, poll->addr1); + if ((temp & poll->poll_mask) != 0) + break; + wait_count++; + } + + *buffer++ = cpu_to_le32(poll->addr2); + *buffer++ = cpu_to_le32(data); + + return 2 * sizeof(u32); + +} + +static u32 qlcnic_read_pollrd(struct qlcnic_adapter *adapter, + struct qlcnic_dump_entry *entry, __le32 *buffer) +{ + struct __pollrd *pollrd = &entry->region.pollrd; + u32 data, wait_count, poll_wait, sel_val; + int i; + + poll_wait = pollrd->poll_wait; + sel_val = pollrd->sel_val; + + for (i = 0; i < pollrd->no_ops; i++) { + qlcnic_ind_wr(adapter, pollrd->sel_addr, sel_val); + wait_count = 0; + while (wait_count < poll_wait) { + data = qlcnic_ind_rd(adapter, pollrd->sel_addr); + if ((data & pollrd->poll_mask) != 0) + break; + wait_count++; + } + + if (wait_count == poll_wait) { + dev_err(&adapter->pdev->dev, + "Timeout exceeded in %s, aborting dump\n", + __func__); + return 0; + } + + data = qlcnic_ind_rd(adapter, pollrd->read_addr); + *buffer++ = cpu_to_le32(sel_val); + *buffer++ = cpu_to_le32(data); + sel_val += pollrd->sel_val_stride; + } + return pollrd->no_ops * (2 * sizeof(u32)); +} + +static u32 qlcnic_read_mux2(struct qlcnic_adapter *adapter, + struct qlcnic_dump_entry *entry, __le32 *buffer) +{ + struct __mux2 *mux2 = &entry->region.mux2; + u32 data; + u32 t_sel_val, sel_val1, sel_val2; + int i; + + sel_val1 = mux2->sel_val1; + sel_val2 = mux2->sel_val2; + + for (i = 0; i < mux2->no_ops; i++) { + qlcnic_ind_wr(adapter, mux2->sel_addr1, sel_val1); + t_sel_val = sel_val1 & mux2->sel_val_mask; + qlcnic_ind_wr(adapter, mux2->sel_addr2, t_sel_val); + data = qlcnic_ind_rd(adapter, mux2->read_addr); + *buffer++ = cpu_to_le32(t_sel_val); + *buffer++ = cpu_to_le32(data); + qlcnic_ind_wr(adapter, mux2->sel_addr1, sel_val2); + t_sel_val = sel_val2 & mux2->sel_val_mask; + qlcnic_ind_wr(adapter, mux2->sel_addr2, t_sel_val); + data = qlcnic_ind_rd(adapter, mux2->read_addr); + *buffer++ = cpu_to_le32(t_sel_val); + *buffer++ = cpu_to_le32(data); + sel_val1 += mux2->sel_val_stride; + sel_val2 += mux2->sel_val_stride; + } + + return mux2->no_ops * (4 * sizeof(u32)); +} + +static u32 qlcnic_83xx_dump_rom(struct qlcnic_adapter *adapter, + struct qlcnic_dump_entry *entry, __le32 *buffer) +{ + u32 fl_addr, size; + struct __mem *rom = &entry->region.mem; + + fl_addr = rom->addr; + size = rom->size / 4; + + if (!qlcnic_83xx_lockless_flash_read32(adapter, fl_addr, + (u8 *)buffer, size)) + return rom->size; + + return 0; +} + +static const struct qlcnic_dump_operations qlcnic_fw_dump_ops[] = { + {QLCNIC_DUMP_NOP, qlcnic_dump_nop}, + {QLCNIC_DUMP_READ_CRB, qlcnic_dump_crb}, + {QLCNIC_DUMP_READ_MUX, qlcnic_dump_mux}, + {QLCNIC_DUMP_QUEUE, qlcnic_dump_que}, + {QLCNIC_DUMP_BRD_CONFIG, qlcnic_read_rom}, + {QLCNIC_DUMP_READ_OCM, qlcnic_dump_ocm}, + {QLCNIC_DUMP_PEG_REG, qlcnic_dump_ctrl}, + {QLCNIC_DUMP_L1_DTAG, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L1_ITAG, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L1_DATA, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L1_INST, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L2_DTAG, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_L2_ITAG, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_L2_DATA, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_L2_INST, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_READ_ROM, qlcnic_read_rom}, + {QLCNIC_DUMP_READ_MEM, qlcnic_read_memory}, + {QLCNIC_DUMP_READ_CTRL, qlcnic_dump_ctrl}, + {QLCNIC_DUMP_TLHDR, qlcnic_dump_nop}, + {QLCNIC_DUMP_RDEND, qlcnic_dump_nop}, +}; + +static const struct qlcnic_dump_operations qlcnic_83xx_fw_dump_ops[] = { + {QLCNIC_DUMP_NOP, qlcnic_dump_nop}, + {QLCNIC_DUMP_READ_CRB, qlcnic_dump_crb}, + {QLCNIC_DUMP_READ_MUX, qlcnic_dump_mux}, + {QLCNIC_DUMP_QUEUE, qlcnic_dump_que}, + {QLCNIC_DUMP_BRD_CONFIG, qlcnic_83xx_dump_rom}, + {QLCNIC_DUMP_READ_OCM, qlcnic_dump_ocm}, + {QLCNIC_DUMP_PEG_REG, qlcnic_dump_ctrl}, + {QLCNIC_DUMP_L1_DTAG, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L1_ITAG, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L1_DATA, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L1_INST, qlcnic_dump_l1_cache}, + {QLCNIC_DUMP_L2_DTAG, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_L2_ITAG, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_L2_DATA, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_L2_INST, qlcnic_dump_l2_cache}, + {QLCNIC_DUMP_POLL_RD, qlcnic_read_pollrd}, + {QLCNIC_READ_MUX2, qlcnic_read_mux2}, + {QLCNIC_READ_POLLRDMWR, qlcnic_read_pollrdmwr}, + {QLCNIC_DUMP_READ_ROM, qlcnic_83xx_dump_rom}, + {QLCNIC_DUMP_READ_MEM, qlcnic_read_memory}, + {QLCNIC_DUMP_READ_CTRL, qlcnic_dump_ctrl}, + {QLCNIC_DUMP_TLHDR, qlcnic_dump_nop}, + {QLCNIC_DUMP_RDEND, qlcnic_dump_nop}, +}; + +static uint32_t qlcnic_temp_checksum(uint32_t *temp_buffer, u32 temp_size) +{ + uint64_t sum = 0; + int count = temp_size / sizeof(uint32_t); + while (count-- > 0) + sum += *temp_buffer++; + while (sum >> 32) + sum = (sum & 0xFFFFFFFF) + (sum >> 32); + return ~sum; +} + +static int qlcnic_fw_flash_get_minidump_temp(struct qlcnic_adapter *adapter, + u8 *buffer, u32 size) +{ + int ret = 0; + + if (qlcnic_82xx_check(adapter)) + return -EIO; + + if (qlcnic_83xx_lock_flash(adapter)) + return -EIO; + + ret = qlcnic_83xx_lockless_flash_read32(adapter, + QLC_83XX_MINIDUMP_FLASH, + buffer, size / sizeof(u32)); + + qlcnic_83xx_unlock_flash(adapter); + + return ret; +} + +static int +qlcnic_fw_flash_get_minidump_temp_size(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) +{ + struct qlcnic_dump_template_hdr tmp_hdr; + u32 size = sizeof(struct qlcnic_dump_template_hdr) / sizeof(u32); + int ret = 0; + + if (qlcnic_82xx_check(adapter)) + return -EIO; + + if (qlcnic_83xx_lock_flash(adapter)) + return -EIO; + + ret = qlcnic_83xx_lockless_flash_read32(adapter, + QLC_83XX_MINIDUMP_FLASH, + (u8 *)&tmp_hdr, size); + + qlcnic_83xx_unlock_flash(adapter); + + cmd->rsp.arg[2] = tmp_hdr.size; + cmd->rsp.arg[3] = tmp_hdr.version; + + return ret; +} + +static int qlcnic_fw_get_minidump_temp_size(struct qlcnic_adapter *adapter, + u32 *version, u32 *temp_size, + u8 *use_flash_temp) +{ + int err = 0; + struct qlcnic_cmd_args cmd; + + if (qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_TEMP_SIZE)) + return -ENOMEM; + + err = qlcnic_issue_cmd(adapter, &cmd); + if (err != QLCNIC_RCODE_SUCCESS) { + if (qlcnic_fw_flash_get_minidump_temp_size(adapter, &cmd)) { + qlcnic_free_mbx_args(&cmd); + return -EIO; + } + *use_flash_temp = 1; + } + + *temp_size = cmd.rsp.arg[2]; + *version = cmd.rsp.arg[3]; + qlcnic_free_mbx_args(&cmd); + + if (!(*temp_size)) + return -EIO; + + return 0; +} + +static int __qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter, + u32 *buffer, u32 temp_size) +{ + int err = 0, i; + void *tmp_addr; + __le32 *tmp_buf; + struct qlcnic_cmd_args cmd; + dma_addr_t tmp_addr_t = 0; + + tmp_addr = dma_alloc_coherent(&adapter->pdev->dev, temp_size, + &tmp_addr_t, GFP_KERNEL); + if (!tmp_addr) { + dev_err(&adapter->pdev->dev, + "Can't get memory for FW dump template\n"); + return -ENOMEM; + } + + if (qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_TEMP_HDR)) { + err = -ENOMEM; + goto free_mem; + } + + cmd.req.arg[1] = LSD(tmp_addr_t); + cmd.req.arg[2] = MSD(tmp_addr_t); + cmd.req.arg[3] = temp_size; + err = qlcnic_issue_cmd(adapter, &cmd); + + tmp_buf = tmp_addr; + if (err == QLCNIC_RCODE_SUCCESS) { + for (i = 0; i < temp_size / sizeof(u32); i++) + *buffer++ = __le32_to_cpu(*tmp_buf++); + } + + qlcnic_free_mbx_args(&cmd); + +free_mem: + dma_free_coherent(&adapter->pdev->dev, temp_size, tmp_addr, tmp_addr_t); + + return err; +} + +int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter) +{ + int err; + u32 temp_size = 0; + u32 version, csum, *tmp_buf; + struct qlcnic_hardware_context *ahw; + struct qlcnic_dump_template_hdr *tmpl_hdr; + u8 use_flash_temp = 0; + + ahw = adapter->ahw; + + err = qlcnic_fw_get_minidump_temp_size(adapter, &version, &temp_size, + &use_flash_temp); + if (err) { + dev_err(&adapter->pdev->dev, + "Can't get template size %d\n", err); + return -EIO; + } + + ahw->fw_dump.tmpl_hdr = vzalloc(temp_size); + if (!ahw->fw_dump.tmpl_hdr) + return -ENOMEM; + + tmp_buf = (u32 *)ahw->fw_dump.tmpl_hdr; + if (use_flash_temp) + goto flash_temp; + + err = __qlcnic_fw_cmd_get_minidump_temp(adapter, tmp_buf, temp_size); + + if (err) { +flash_temp: + err = qlcnic_fw_flash_get_minidump_temp(adapter, (u8 *)tmp_buf, + temp_size); + + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to get minidump template header %d\n", + err); + vfree(ahw->fw_dump.tmpl_hdr); + ahw->fw_dump.tmpl_hdr = NULL; + return -EIO; + } + } + + csum = qlcnic_temp_checksum((uint32_t *)tmp_buf, temp_size); + + if (csum) { + dev_err(&adapter->pdev->dev, + "Template header checksum validation failed\n"); + vfree(ahw->fw_dump.tmpl_hdr); + ahw->fw_dump.tmpl_hdr = NULL; + return -EIO; + } + + tmpl_hdr = ahw->fw_dump.tmpl_hdr; + tmpl_hdr->drv_cap_mask = QLCNIC_DUMP_MASK_DEF; + ahw->fw_dump.enable = 1; + + return 0; +} + int qlcnic_dump_fw(struct qlcnic_adapter *adapter) { __le32 *buffer; + u32 ocm_window; char mesg[64]; char *msg[] = {mesg, NULL}; int i, k, ops_cnt, ops_index, dump_size = 0; @@ -550,12 +906,23 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter) struct qlcnic_dump_entry *entry; struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump; struct qlcnic_dump_template_hdr *tmpl_hdr = fw_dump->tmpl_hdr; + static const struct qlcnic_dump_operations *fw_dump_ops; + struct qlcnic_hardware_context *ahw; + + ahw = adapter->ahw; + + if (!fw_dump->enable) { + dev_info(&adapter->pdev->dev, "Dump not enabled\n"); + return -EIO; + } if (fw_dump->clr) { dev_info(&adapter->pdev->dev, "Previous dump not cleared, not capturing dump\n"); return -EIO; } + + netif_info(adapter->ahw, drv, adapter->netdev, "Take FW dump\n"); /* Calculate the size for dump data area only */ for (i = 2, k = 1; (i & QLCNIC_DUMP_MASK_MAX); i <<= 1, k++) if (i & tmpl_hdr->drv_cap_mask) @@ -573,11 +940,21 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter) buffer = fw_dump->data; fw_dump->size = dump_size; no_entries = tmpl_hdr->num_entries; - ops_cnt = ARRAY_SIZE(fw_dump_ops); entry_offset = tmpl_hdr->offset; tmpl_hdr->sys_info[0] = QLCNIC_DRIVER_VERSION; tmpl_hdr->sys_info[1] = adapter->fw_version; + if (qlcnic_82xx_check(adapter)) { + ops_cnt = ARRAY_SIZE(qlcnic_fw_dump_ops); + fw_dump_ops = qlcnic_fw_dump_ops; + } else { + ops_cnt = ARRAY_SIZE(qlcnic_83xx_fw_dump_ops); + fw_dump_ops = qlcnic_83xx_fw_dump_ops; + ocm_window = tmpl_hdr->ocm_wnd_reg[adapter->ahw->pci_func]; + tmpl_hdr->saved_state[QLC_83XX_OCM_INDEX] = ocm_window; + tmpl_hdr->saved_state[QLC_83XX_PCI_INDEX] = ahw->pci_func; + } + for (i = 0; i < no_entries; i++) { entry = (void *)tmpl_hdr + entry_offset; if (!(entry->hdr.mask & tmpl_hdr->drv_cap_mask)) { @@ -585,6 +962,7 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter) entry_offset += entry->hdr.offset; continue; } + /* Find the handler for this entry */ ops_index = 0; while (ops_index < ops_cnt) { @@ -592,16 +970,17 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter) break; ops_index++; } + if (ops_index == ops_cnt) { dev_info(&adapter->pdev->dev, "Invalid entry type %d, exiting dump\n", entry->hdr.type); goto error; } + /* Collect dump for this entry */ dump = fw_dump_ops[ops_index].handler(adapter, entry, buffer); - if (dump && !qlcnic_valid_dump_entry(&adapter->pdev->dev, entry, - dump)) + if (!qlcnic_valid_dump_entry(&adapter->pdev->dev, entry, dump)) entry->hdr.flags |= QLCNIC_DUMP_SKIP; buf_offset += entry->hdr.cap_size; entry_offset += entry->hdr.offset; @@ -616,8 +995,8 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter) fw_dump->clr = 1; snprintf(mesg, sizeof(mesg), "FW_DUMP=%s", adapter->netdev->name); - dev_info(&adapter->pdev->dev, "Dump data, %d bytes captured\n", - fw_dump->size); + dev_info(&adapter->pdev->dev, "%s: Dump data, %d bytes captured\n", + adapter->netdev->name, fw_dump->size); /* Send a udev event to notify availability of FW dump */ kobject_uevent_env(&adapter->pdev->dev.kobj, KOBJ_CHANGE, msg); return 0; @@ -626,3 +1005,21 @@ error: vfree(fw_dump->data); return -EINVAL; } + +void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *adapter) +{ + u32 prev_version, current_version; + struct qlcnic_hardware_context *ahw = adapter->ahw; + struct qlcnic_fw_dump *fw_dump = &ahw->fw_dump; + struct pci_dev *pdev = adapter->pdev; + + prev_version = adapter->fw_version; + current_version = qlcnic_83xx_get_fw_version(adapter); + + if (fw_dump->tmpl_hdr == NULL || current_version > prev_version) { + if (fw_dump->tmpl_hdr) + vfree(fw_dump->tmpl_hdr); + if (!qlcnic_fw_cmd_get_minidump_temp(adapter)) + dev_info(&pdev->dev, "Supports FW dump capability\n"); + } +} -- cgit v0.10.2 From 7e38d04bcb405e3cbba15132cecadd2e9c571fdf Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 1 Jan 2013 03:20:28 +0000 Subject: qlcnic: 83xx ethtool interface routines 83xx ethtool interface routines Signed-off-by: Anirban Chakraborty Signed-off-by: Sucheta Chakraborty Signed-off-by: Jitendra Kalsaria Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 1898b2f8..b637f1e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -352,6 +352,7 @@ struct qlcnic_rx_buffer { #define QLCNIC_INTR_DEFAULT 0x04 #define QLCNIC_CONFIG_INTR_COALESCE 3 +#define QLCNIC_DEV_INFO_SIZE 1 struct qlcnic_nic_intr_coalesce { u8 type; @@ -942,6 +943,7 @@ struct qlcnic_ipaddr { #define __QLCNIC_AER 5 #define __QLCNIC_DIAG_RES_ALLOC 6 #define __QLCNIC_LED_ENABLE 7 +#define __QLCNIC_ELB_INPROGRESS 8 #define QLCNIC_INTERRUPT_TEST 1 #define QLCNIC_LOOPBACK_TEST 2 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 9cd51cb..46162f8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2383,3 +2383,375 @@ int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, return 0; } + +int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter) +{ + int err; + u32 config = 0, state; + struct qlcnic_cmd_args cmd; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + state = readl(ahw->pci_base0 + QLC_83XX_LINK_STATE(ahw->pci_func)); + if (!QLC_83xx_FUNC_VAL(state, ahw->pci_func)) { + dev_info(&adapter->pdev->dev, "link state down\n"); + return config; + } + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_LINK_STATUS); + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_info(&adapter->pdev->dev, + "Get Link Status Command failed: 0x%x\n", err); + goto out; + } else { + config = cmd.rsp.arg[1]; + switch (QLC_83XX_CURRENT_LINK_SPEED(config)) { + case QLC_83XX_10M_LINK: + ahw->link_speed = SPEED_10; + break; + case QLC_83XX_100M_LINK: + ahw->link_speed = SPEED_100; + break; + case QLC_83XX_1G_LINK: + ahw->link_speed = SPEED_1000; + break; + case QLC_83XX_10G_LINK: + ahw->link_speed = SPEED_10000; + break; + default: + ahw->link_speed = 0; + break; + } + config = cmd.rsp.arg[3]; + if (config & 1) + err = 1; + } +out: + qlcnic_free_mbx_args(&cmd); + return config; +} + +int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter) +{ + u32 config = 0; + int status = 0; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + /* Get port configuration info */ + status = qlcnic_83xx_get_port_info(adapter); + /* Get Link Status related info */ + config = qlcnic_83xx_test_link(adapter); + ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config); + /* hard code until there is a way to get it from flash */ + ahw->board_type = QLCNIC_BRDTYPE_83XX_10G; + return status; +} + +int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter, + struct ethtool_cmd *ecmd) +{ + int status = 0; + u32 config = adapter->ahw->port_config; + + if (ecmd->autoneg) + adapter->ahw->port_config |= BIT_15; + + switch (ethtool_cmd_speed(ecmd)) { + case SPEED_10: + adapter->ahw->port_config |= BIT_8; + break; + case SPEED_100: + adapter->ahw->port_config |= BIT_9; + break; + case SPEED_1000: + adapter->ahw->port_config |= BIT_10; + break; + case SPEED_10000: + adapter->ahw->port_config |= BIT_11; + break; + default: + return -EINVAL; + } + + status = qlcnic_83xx_set_port_config(adapter); + if (status) { + dev_info(&adapter->pdev->dev, + "Faild to Set Link Speed and autoneg.\n"); + adapter->ahw->port_config = config; + } + return status; +} + +static inline u64 *qlcnic_83xx_copy_stats(struct qlcnic_cmd_args *cmd, + u64 *data, int index) +{ + u32 low, hi; + u64 val; + + low = cmd->rsp.arg[index]; + hi = cmd->rsp.arg[index + 1]; + val = (((u64) low) | (((u64) hi) << 32)); + *data++ = val; + return data; +} + +static u64 *qlcnic_83xx_fill_stats(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd, u64 *data, + int type, int *ret) +{ + int err, k, total_regs; + + *ret = 0; + err = qlcnic_issue_cmd(adapter, cmd); + if (err != QLCNIC_RCODE_SUCCESS) { + dev_info(&adapter->pdev->dev, + "Error in get statistics mailbox command\n"); + *ret = -EIO; + return data; + } + total_regs = cmd->rsp.num; + switch (type) { + case QLC_83XX_STAT_MAC: + /* fill in MAC tx counters */ + for (k = 2; k < 28; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + /* skip 24 bytes of reserved area */ + /* fill in MAC rx counters */ + for (k += 6; k < 60; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + /* skip 24 bytes of reserved area */ + /* fill in MAC rx frame stats */ + for (k += 6; k < 80; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + break; + case QLC_83XX_STAT_RX: + for (k = 2; k < 8; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + /* skip 8 bytes of reserved data */ + for (k += 2; k < 24; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + /* skip 8 bytes containing RE1FBQ error data */ + for (k += 2; k < total_regs; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + break; + case QLC_83XX_STAT_TX: + for (k = 2; k < 10; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + /* skip 8 bytes of reserved data */ + for (k += 2; k < total_regs; k += 2) + data = qlcnic_83xx_copy_stats(cmd, data, k); + break; + default: + dev_warn(&adapter->pdev->dev, "Unknown get statistics mode\n"); + *ret = -EIO; + } + return data; +} + +void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data) +{ + struct qlcnic_cmd_args cmd; + int ret = 0; + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_STATISTICS); + /* Get Tx stats */ + cmd.req.arg[1] = BIT_1 | (adapter->tx_ring->ctx_id << 16); + cmd.rsp.num = QLC_83XX_TX_STAT_REGS; + data = qlcnic_83xx_fill_stats(adapter, &cmd, data, + QLC_83XX_STAT_TX, &ret); + if (ret) { + dev_info(&adapter->pdev->dev, "Error getting MAC stats\n"); + goto out; + } + /* Get MAC stats */ + cmd.req.arg[1] = BIT_2 | (adapter->portnum << 16); + cmd.rsp.num = QLC_83XX_MAC_STAT_REGS; + memset(cmd.rsp.arg, 0, sizeof(u32) * cmd.rsp.num); + data = qlcnic_83xx_fill_stats(adapter, &cmd, data, + QLC_83XX_STAT_MAC, &ret); + if (ret) { + dev_info(&adapter->pdev->dev, + "Error getting Rx stats\n"); + goto out; + } + /* Get Rx stats */ + cmd.req.arg[1] = adapter->recv_ctx->context_id << 16; + cmd.rsp.num = QLC_83XX_RX_STAT_REGS; + memset(cmd.rsp.arg, 0, sizeof(u32) * cmd.rsp.num); + data = qlcnic_83xx_fill_stats(adapter, &cmd, data, + QLC_83XX_STAT_RX, &ret); + if (ret) + dev_info(&adapter->pdev->dev, + "Error getting Tx stats\n"); +out: + qlcnic_free_mbx_args(&cmd); +} + +int qlcnic_83xx_reg_test(struct qlcnic_adapter *adapter) +{ + u32 major, minor, sub; + + major = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MAJOR); + minor = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MINOR); + sub = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_SUB); + + if (adapter->fw_version != QLCNIC_VERSION_CODE(major, minor, sub)) { + dev_info(&adapter->pdev->dev, "%s: Reg test failed\n", + __func__); + return 1; + } + return 0; +} + +int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *adapter) +{ + return (ARRAY_SIZE(qlcnic_83xx_ext_reg_tbl) * + sizeof(adapter->ahw->ext_reg_tbl)) + + (ARRAY_SIZE(qlcnic_83xx_reg_tbl) + + sizeof(adapter->ahw->reg_tbl)); +} + +int qlcnic_83xx_get_registers(struct qlcnic_adapter *adapter, u32 *regs_buff) +{ + int i, j = 0; + + for (i = QLCNIC_DEV_INFO_SIZE + 1; + j < ARRAY_SIZE(qlcnic_83xx_reg_tbl); i++, j++) + regs_buff[i] = QLC_SHARED_REG_RD32(adapter, j); + + for (j = 0; j < ARRAY_SIZE(qlcnic_83xx_ext_reg_tbl); j++) + regs_buff[i++] = QLCRDX(adapter->ahw, j); + return i; +} + +int qlcnic_83xx_interrupt_test(struct qlcnic_adapter *adapter, + struct qlcnic_cmd_args *cmd) +{ + u8 val; + int ret; + u32 data; + u16 intrpt_id, id; + + if (adapter->flags & QLCNIC_MSIX_ENABLED) + intrpt_id = adapter->ahw->intr_tbl[0].id; + else + intrpt_id = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_ID); + + cmd->req.arg[1] = 1; + cmd->req.arg[2] = intrpt_id; + cmd->req.arg[3] = BIT_0; + + ret = qlcnic_issue_cmd(adapter, cmd); + data = cmd->rsp.arg[2]; + id = LSW(data); + val = LSB(MSW(data)); + if (id != intrpt_id) + dev_info(&adapter->pdev->dev, + "Interrupt generated: 0x%x, requested:0x%x\n", + id, intrpt_id); + if (val) + dev_info(&adapter->pdev->dev, + "Interrupt test error: 0x%x\n", val); + + return ret; +} + +void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *adapter, + struct ethtool_pauseparam *pause) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + int status = 0; + u32 config; + + status = qlcnic_83xx_get_port_config(adapter); + if (status) { + dev_err(&adapter->pdev->dev, + "%s: Get Pause Config failed\n", __func__); + return; + } + config = ahw->port_config; + if (config & QLC_83XX_CFG_STD_PAUSE) { + if (config & QLC_83XX_CFG_STD_TX_PAUSE) + pause->tx_pause = 1; + if (config & QLC_83XX_CFG_STD_RX_PAUSE) + pause->rx_pause = 1; + } + + if (QLC_83XX_AUTONEG(config)) + pause->autoneg = 1; +} + +int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *adapter, + struct ethtool_pauseparam *pause) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + int status = 0; + u32 config; + + status = qlcnic_83xx_get_port_config(adapter); + if (status) { + dev_err(&adapter->pdev->dev, + "%s: Get Pause Config failed.\n", __func__); + return status; + } + config = ahw->port_config; + + if (ahw->port_type == QLCNIC_GBE) { + if (pause->autoneg) + ahw->port_config |= QLC_83XX_ENABLE_AUTONEG; + if (!pause->autoneg) + ahw->port_config &= ~QLC_83XX_ENABLE_AUTONEG; + } else if ((ahw->port_type == QLCNIC_XGBE) && (pause->autoneg)) { + return -EOPNOTSUPP; + } + + if (!(config & QLC_83XX_CFG_STD_PAUSE)) + ahw->port_config |= QLC_83XX_CFG_STD_PAUSE; + + if (pause->rx_pause && pause->tx_pause) { + ahw->port_config |= QLC_83XX_CFG_STD_TX_RX_PAUSE; + } else if (pause->rx_pause && !pause->tx_pause) { + ahw->port_config &= ~QLC_83XX_CFG_STD_TX_PAUSE; + ahw->port_config |= QLC_83XX_CFG_STD_RX_PAUSE; + } else if (pause->tx_pause && !pause->rx_pause) { + ahw->port_config &= ~QLC_83XX_CFG_STD_RX_PAUSE; + ahw->port_config |= QLC_83XX_CFG_STD_TX_PAUSE; + } else if (!pause->rx_pause && !pause->tx_pause) { + ahw->port_config &= ~QLC_83XX_CFG_STD_TX_RX_PAUSE; + } + status = qlcnic_83xx_set_port_config(adapter); + if (status) { + dev_err(&adapter->pdev->dev, + "%s: Set Pause Config failed.\n", __func__); + ahw->port_config = config; + } + return status; +} + +static int qlcnic_83xx_read_flash_status_reg(struct qlcnic_adapter *adapter) +{ + int ret; + + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, + QLC_83XX_FLASH_OEM_READ_SIG); + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_CONTROL, + QLC_83XX_FLASH_READ_CTRL); + ret = qlcnic_83xx_poll_flash_status_reg(adapter); + if (ret) + return -EIO; + + ret = qlcnic_83xx_rd_reg_indirect(adapter, QLC_83XX_FLASH_RDDATA); + return ret & 0xFF; +} + +int qlcnic_83xx_flash_test(struct qlcnic_adapter *adapter) +{ + int status; + + status = qlcnic_83xx_read_flash_status_reg(adapter); + if (status == -EIO) { + dev_info(&adapter->pdev->dev, "%s: EEPROM test failed.\n", + __func__); + return 1; + } + return 0; +} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index cd12861..2b44eb1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -337,8 +337,6 @@ void qlcnic_83xx_napi_disable(struct qlcnic_adapter *); int qlcnic_83xx_config_led(struct qlcnic_adapter *, u32, u32); void qlcnic_ind_wr(struct qlcnic_adapter *, u32, u32); int qlcnic_ind_rd(struct qlcnic_adapter *, u32); -void qlcnic_83xx_get_stats(struct qlcnic_adapter *, - struct ethtool_stats *, u64 *); int qlcnic_83xx_create_rx_ctx(struct qlcnic_adapter *); int qlcnic_83xx_create_tx_ctx(struct qlcnic_adapter *, struct qlcnic_host_tx_ring *, int); @@ -409,4 +407,18 @@ int qlcnic_83xx_get_vnic_vport_info(struct qlcnic_adapter *, int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *); void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *); +void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data); +int qlcnic_83xx_get_settings(struct qlcnic_adapter *); +int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *); +void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *, + struct ethtool_pauseparam *); +int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *, + struct ethtool_pauseparam *); +int qlcnic_83xx_test_link(struct qlcnic_adapter *); +int qlcnic_83xx_reg_test(struct qlcnic_adapter *); +int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *); +int qlcnic_83xx_get_registers(struct qlcnic_adapter *, u32 *); +int qlcnic_83xx_interrupt_test(struct qlcnic_adapter *, + struct qlcnic_cmd_args *); +int qlcnic_83xx_flash_test(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 920e33d..d8008c0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -22,42 +22,37 @@ struct qlcnic_stats { #define QLC_SIZEOF(m) FIELD_SIZEOF(struct qlcnic_adapter, m) #define QLC_OFF(m) offsetof(struct qlcnic_adapter, m) +static const u32 qlcnic_fw_dump_level[] = { + 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff +}; static const struct qlcnic_stats qlcnic_gstrings_stats[] = { - {"xmit_called", - QLC_SIZEOF(stats.xmitcalled), QLC_OFF(stats.xmitcalled)}, - {"xmit_finished", - QLC_SIZEOF(stats.xmitfinished), QLC_OFF(stats.xmitfinished)}, - {"rx_dropped", - QLC_SIZEOF(stats.rxdropped), QLC_OFF(stats.rxdropped)}, - {"tx_dropped", - QLC_SIZEOF(stats.txdropped), QLC_OFF(stats.txdropped)}, - {"csummed", - QLC_SIZEOF(stats.csummed), QLC_OFF(stats.csummed)}, - {"rx_pkts", - QLC_SIZEOF(stats.rx_pkts), QLC_OFF(stats.rx_pkts)}, - {"lro_pkts", - QLC_SIZEOF(stats.lro_pkts), QLC_OFF(stats.lro_pkts)}, - {"rx_bytes", - QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)}, - {"tx_bytes", - QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)}, - {"lrobytes", - QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)}, - {"lso_frames", - QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)}, - {"xmit_on", - QLC_SIZEOF(stats.xmit_on), QLC_OFF(stats.xmit_on)}, - {"xmit_off", - QLC_SIZEOF(stats.xmit_off), QLC_OFF(stats.xmit_off)}, + {"xmit_called", QLC_SIZEOF(stats.xmitcalled), + QLC_OFF(stats.xmitcalled)}, + {"xmit_finished", QLC_SIZEOF(stats.xmitfinished), + QLC_OFF(stats.xmitfinished)}, + {"rx_dropped", QLC_SIZEOF(stats.rxdropped), QLC_OFF(stats.rxdropped)}, + {"tx_dropped", QLC_SIZEOF(stats.txdropped), QLC_OFF(stats.txdropped)}, + {"csummed", QLC_SIZEOF(stats.csummed), QLC_OFF(stats.csummed)}, + {"rx_pkts", QLC_SIZEOF(stats.rx_pkts), QLC_OFF(stats.rx_pkts)}, + {"lro_pkts", QLC_SIZEOF(stats.lro_pkts), QLC_OFF(stats.lro_pkts)}, + {"rx_bytes", QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)}, + {"tx_bytes", QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)}, + {"lrobytes", QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)}, + {"lso_frames", QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)}, + {"xmit_on", QLC_SIZEOF(stats.xmit_on), QLC_OFF(stats.xmit_on)}, + {"xmit_off", QLC_SIZEOF(stats.xmit_off), QLC_OFF(stats.xmit_off)}, {"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure), - QLC_OFF(stats.skb_alloc_failure)}, - {"null rxbuf", - QLC_SIZEOF(stats.null_rxbuf), QLC_OFF(stats.null_rxbuf)}, + QLC_OFF(stats.skb_alloc_failure)}, + {"null rxbuf", QLC_SIZEOF(stats.null_rxbuf), QLC_OFF(stats.null_rxbuf)}, {"rx dma map error", QLC_SIZEOF(stats.rx_dma_map_error), QLC_OFF(stats.rx_dma_map_error)}, {"tx dma map error", QLC_SIZEOF(stats.tx_dma_map_error), QLC_OFF(stats.tx_dma_map_error)}, + {"mac_filter_limit_overrun", QLC_SIZEOF(stats.mac_filter_limit_overrun), + QLC_OFF(stats.mac_filter_limit_overrun)}, + {"spurious intr", QLC_SIZEOF(stats.spurious_intr), + QLC_OFF(stats.spurious_intr)}, }; @@ -78,7 +73,15 @@ static const char qlcnic_device_gstrings_stats[][ETH_GSTRING_LEN] = { "tx numbytes", }; -static const char qlcnic_mac_stats_strings [][ETH_GSTRING_LEN] = { +static const char qlcnic_83xx_tx_stats_strings[][ETH_GSTRING_LEN] = { + "ctx_tx_bytes", + "ctx_tx_pkts", + "ctx_tx_errors", + "ctx_tx_dropped_pkts", + "ctx_tx_num_buffers", +}; + +static const char qlcnic_83xx_mac_stats_strings[][ETH_GSTRING_LEN] = { "mac_tx_frames", "mac_tx_bytes", "mac_tx_mcast_pkts", @@ -110,25 +113,62 @@ static const char qlcnic_mac_stats_strings [][ETH_GSTRING_LEN] = { "mac_rx_length_large", "mac_rx_jabber", "mac_rx_dropped", - "mac_rx_crc_error", + "mac_crc_error", "mac_align_error", }; -#define QLCNIC_STATS_LEN ARRAY_SIZE(qlcnic_gstrings_stats) -#define QLCNIC_MAC_STATS_LEN ARRAY_SIZE(qlcnic_mac_stats_strings) -#define QLCNIC_DEVICE_STATS_LEN ARRAY_SIZE(qlcnic_device_gstrings_stats) -#define QLCNIC_TOTAL_STATS_LEN QLCNIC_STATS_LEN + QLCNIC_MAC_STATS_LEN +#define QLCNIC_STATS_LEN ARRAY_SIZE(qlcnic_gstrings_stats) +static const char qlcnic_83xx_rx_stats_strings[][ETH_GSTRING_LEN] = { + "ctx_rx_bytes", + "ctx_rx_pkts", + "ctx_lro_pkt_cnt", + "ctx_ip_csum_error", + "ctx_rx_pkts_wo_ctx", + "ctx_rx_pkts_dropped_wo_sts", + "ctx_rx_osized_pkts", + "ctx_rx_pkts_dropped_wo_rds", + "ctx_rx_unexpected_mcast_pkts", + "ctx_invalid_mac_address", + "ctx_rx_rds_ring_prim_attemoted", + "ctx_rx_rds_ring_prim_success", + "ctx_num_lro_flows_added", + "ctx_num_lro_flows_removed", + "ctx_num_lro_flows_active", + "ctx_pkts_dropped_unknown", +}; static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = { "Register_Test_on_offline", "Link_Test_on_offline", "Interrupt_Test_offline", "Internal_Loopback_offline", - "External_Loopback_offline" + "EEPROM_Test_offline" }; #define QLCNIC_TEST_LEN ARRAY_SIZE(qlcnic_gstrings_test) +static inline int qlcnic_82xx_statistics(void) +{ + return QLCNIC_STATS_LEN + ARRAY_SIZE(qlcnic_83xx_mac_stats_strings); +} + +static inline int qlcnic_83xx_statistics(void) +{ + return ARRAY_SIZE(qlcnic_83xx_tx_stats_strings) + + ARRAY_SIZE(qlcnic_83xx_mac_stats_strings) + + ARRAY_SIZE(qlcnic_83xx_rx_stats_strings); +} + +static int qlcnic_dev_statistics_len(struct qlcnic_adapter *adapter) +{ + if (qlcnic_82xx_check(adapter)) + return qlcnic_82xx_statistics(); + else if (qlcnic_83xx_check(adapter)) + return qlcnic_83xx_statistics(); + else + return -1; +} + #define QLCNIC_RING_REGS_COUNT 20 #define QLCNIC_RING_REGS_LEN (QLCNIC_RING_REGS_COUNT * sizeof(u32)) #define QLCNIC_MAX_EEPROM_LEN 1024 @@ -148,6 +188,12 @@ static const u32 diag_registers[] = { QLCNIC_PEG_ALIVE_COUNTER, QLCNIC_PEG_HALT_STATUS1, QLCNIC_PEG_HALT_STATUS2, + -1 +}; + +static const u32 ext_diag_registers[] = { + CRB_XG_STATE_P3P, + ISR_INT_STATE_REG, QLCNIC_CRB_PEG_NET_0+0x3c, QLCNIC_CRB_PEG_NET_1+0x3c, QLCNIC_CRB_PEG_NET_2+0x3c, @@ -156,12 +202,19 @@ static const u32 diag_registers[] = { }; #define QLCNIC_MGMT_API_VERSION 2 -#define QLCNIC_DEV_INFO_SIZE 1 -#define QLCNIC_ETHTOOL_REGS_VER 2 +#define QLCNIC_ETHTOOL_REGS_VER 3 + static int qlcnic_get_regs_len(struct net_device *dev) { - return sizeof(diag_registers) + QLCNIC_RING_REGS_LEN + - QLCNIC_DEV_INFO_SIZE + 1; + struct qlcnic_adapter *adapter = netdev_priv(dev); + u32 len; + + if (qlcnic_83xx_check(adapter)) + len = qlcnic_83xx_get_regs_len(adapter); + else + len = sizeof(ext_diag_registers) + sizeof(diag_registers); + + return QLCNIC_RING_REGS_LEN + len + QLCNIC_DEV_INFO_SIZE + 1; } static int qlcnic_get_eeprom_len(struct net_device *dev) @@ -174,10 +227,9 @@ qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) { struct qlcnic_adapter *adapter = netdev_priv(dev); u32 fw_major, fw_minor, fw_build; - - fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR); - fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR); - fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB); + fw_major = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MAJOR); + fw_minor = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_MINOR); + fw_build = QLC_SHARED_REG_RD32(adapter, QLCNIC_FW_VERSION_SUB); snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d.%d.%d", fw_major, fw_minor, fw_build); @@ -192,7 +244,10 @@ static int qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct qlcnic_adapter *adapter = netdev_priv(dev); + struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 speed, reg; int check_sfp_module = 0; + u16 pcifn = ahw->pci_func; /* read which mode */ if (adapter->ahw->port_type == QLCNIC_GBE) { @@ -213,9 +268,12 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->autoneg = adapter->ahw->link_autoneg; } else if (adapter->ahw->port_type == QLCNIC_XGBE) { - u32 val; + u32 val = 0; + if (qlcnic_83xx_check(adapter)) + qlcnic_83xx_get_settings(adapter); + else + val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); - val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); if (val == QLCNIC_PORT_MODE_802_3_AP) { ecmd->supported = SUPPORTED_1000baseT_Full; ecmd->advertising = ADVERTISED_1000baseT_Full; @@ -225,6 +283,12 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } if (netif_running(dev) && adapter->ahw->has_link_events) { + if (qlcnic_82xx_check(adapter)) { + reg = QLCRD32(adapter, + P3P_LINK_SPEED_REG(pcifn)); + speed = P3P_LINK_SPEED_VAL(pcifn, reg); + ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; + } ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed); ecmd->autoneg = adapter->ahw->link_autoneg; ecmd->duplex = adapter->ahw->link_duplex; @@ -294,6 +358,13 @@ skip: ecmd->port = PORT_TP; } break; + case QLCNIC_BRDTYPE_83XX_10G: + ecmd->autoneg = AUTONEG_DISABLE; + ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP); + ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP); + ecmd->port = PORT_FIBRE; + check_sfp_module = netif_running(dev) && ahw->has_link_events; + break; default: dev_err(&adapter->pdev->dev, "Unsupported board model %d\n", adapter->ahw->board_type); @@ -321,16 +392,10 @@ skip: return 0; } -static int -qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +static int qlcnic_set_port_config(struct qlcnic_adapter *adapter, + struct ethtool_cmd *ecmd) { - u32 config = 0; - u32 ret = 0; - struct qlcnic_adapter *adapter = netdev_priv(dev); - - if (adapter->ahw->port_type != QLCNIC_GBE) - return -EOPNOTSUPP; - + u32 ret = 0, config = 0; /* read which mode */ if (ecmd->duplex) config |= 0x1; @@ -358,6 +423,24 @@ qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) return -EOPNOTSUPP; else if (ret) return -EIO; + return ret; +} + +static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + u32 ret = 0; + struct qlcnic_adapter *adapter = netdev_priv(dev); + + if (adapter->ahw->port_type != QLCNIC_GBE) + return -EOPNOTSUPP; + + if (qlcnic_83xx_check(adapter)) + ret = qlcnic_83xx_set_settings(adapter, ecmd); + else + ret = qlcnic_set_port_config(adapter, ecmd); + + if (!ret) + return ret; adapter->ahw->link_speed = ethtool_cmd_speed(ecmd); adapter->ahw->link_duplex = ecmd->duplex; @@ -370,6 +453,19 @@ qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) return dev->netdev_ops->ndo_open(dev); } +static int qlcnic_82xx_get_registers(struct qlcnic_adapter *adapter, + u32 *regs_buff) +{ + int i, j = 0; + + for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++) + regs_buff[i] = QLC_SHARED_REG_RD32(adapter, diag_registers[j]); + j = 0; + while (ext_diag_registers[j] != -1) + regs_buff[i++] = QLCRD32(adapter, ext_diag_registers[j++]); + return i; +} + static void qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) { @@ -377,17 +473,20 @@ qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; struct qlcnic_host_sds_ring *sds_ring; u32 *regs_buff = p; - int ring, i = 0, j = 0; + int ring, i = 0; memset(p, 0, qlcnic_get_regs_len(dev)); + regs->version = (QLCNIC_ETHTOOL_REGS_VER << 24) | (adapter->ahw->revision_id << 16) | (adapter->pdev)->device; regs_buff[0] = (0xcafe0000 | (QLCNIC_DEV_INFO_SIZE & 0xffff)); regs_buff[1] = QLCNIC_MGMT_API_VERSION; - for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++) - regs_buff[i] = QLCRD32(adapter, diag_registers[j]); + if (qlcnic_82xx_check(adapter)) + i = qlcnic_82xx_get_registers(adapter, regs_buff); + else + i = qlcnic_83xx_get_registers(adapter, regs_buff); if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) return; @@ -415,6 +514,10 @@ static u32 qlcnic_test_link(struct net_device *dev) struct qlcnic_adapter *adapter = netdev_priv(dev); u32 val; + if (qlcnic_83xx_check(adapter)) { + val = qlcnic_83xx_test_link(adapter); + return (val & 1) ? 0 : 1; + } val = QLCRD32(adapter, CRB_XG_STATE_P3P); val = XG_LINK_STATE_P3P(adapter->ahw->pci_func, val); return (val == XG_LINK_UP_P3P) ? 0 : 1; @@ -426,8 +529,10 @@ qlcnic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, { struct qlcnic_adapter *adapter = netdev_priv(dev); int offset; - int ret; + int ret = -1; + if (qlcnic_83xx_check(adapter)) + return 0; if (eeprom->len == 0) return -EINVAL; @@ -435,8 +540,9 @@ qlcnic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, ((adapter->pdev)->device << 16); offset = eeprom->offset; - ret = qlcnic_rom_fast_read_words(adapter, offset, bytes, - eeprom->len); + if (qlcnic_82xx_check(adapter)) + ret = qlcnic_rom_fast_read_words(adapter, offset, bytes, + eeprom->len); if (ret < 0) return ret; @@ -547,6 +653,10 @@ qlcnic_get_pauseparam(struct net_device *netdev, int port = adapter->ahw->physical_port; __u32 val; + if (qlcnic_83xx_check(adapter)) { + qlcnic_83xx_get_pauseparam(adapter, pause); + return; + } if (adapter->ahw->port_type == QLCNIC_GBE) { if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS)) return; @@ -592,6 +702,9 @@ qlcnic_set_pauseparam(struct net_device *netdev, int port = adapter->ahw->physical_port; __u32 val; + if (qlcnic_83xx_check(adapter)) + return qlcnic_83xx_set_pauseparam(adapter, pause); + /* read mode */ if (adapter->ahw->port_type == QLCNIC_GBE) { if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS)) @@ -606,6 +719,7 @@ qlcnic_set_pauseparam(struct net_device *netdev, QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), val); + QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), val); /* set autoneg */ val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL); switch (port) { @@ -668,6 +782,9 @@ static int qlcnic_reg_test(struct net_device *dev) struct qlcnic_adapter *adapter = netdev_priv(dev); u32 data_read; + if (qlcnic_83xx_check(adapter)) + return qlcnic_83xx_reg_test(adapter); + data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0)); if ((data_read & 0xffff) != adapter->pdev->vendor) return 1; @@ -675,16 +792,30 @@ static int qlcnic_reg_test(struct net_device *dev) return 0; } +static int qlcnic_eeprom_test(struct net_device *dev) +{ + struct qlcnic_adapter *adapter = netdev_priv(dev); + + if (qlcnic_82xx_check(adapter)) + return 0; + + return qlcnic_83xx_flash_test(adapter); +} + static int qlcnic_get_sset_count(struct net_device *dev, int sset) { + int len; + struct qlcnic_adapter *adapter = netdev_priv(dev); switch (sset) { case ETH_SS_TEST: return QLCNIC_TEST_LEN; case ETH_SS_STATS: - if (adapter->flags & QLCNIC_ESWITCH_ENABLED) - return QLCNIC_TOTAL_STATS_LEN + QLCNIC_DEVICE_STATS_LEN; - return QLCNIC_TOTAL_STATS_LEN; + len = qlcnic_dev_statistics_len(adapter) + QLCNIC_STATS_LEN; + if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) || + qlcnic_83xx_check(adapter)) + return len; + return qlcnic_82xx_statistics(); default: return -EOPNOTSUPP; } @@ -707,8 +838,12 @@ static int qlcnic_irq_test(struct net_device *netdev) adapter->ahw->diag_cnt = 0; qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST); - cmd.req.arg[1] = adapter->ahw->pci_func; - ret = qlcnic_issue_cmd(adapter, &cmd); + if (qlcnic_83xx_check(adapter)) { + ret = qlcnic_83xx_interrupt_test(adapter, &cmd); + } else { + cmd.req.arg[1] = adapter->ahw->pci_func; + ret = qlcnic_issue_cmd(adapter, &cmd); + } if (ret) goto done; @@ -760,11 +895,10 @@ static int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode) skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE); qlcnic_create_loopback_buff(skb->data, adapter->mac_addr); skb_put(skb, QLCNIC_ILB_PKT_SIZE); - adapter->ahw->diag_cnt = 0; qlcnic_xmit_frame(skb, adapter->netdev); - loop = 0; + do { msleep(1); qlcnic_process_rcv_ring_diag(sds_ring); @@ -775,18 +909,18 @@ static int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode) dev_kfree_skb_any(skb); if (!adapter->ahw->diag_cnt) - QLCDB(adapter, DRV, - "LB Test: packet #%d was not received\n", i + 1); + dev_warn(&adapter->pdev->dev, + "LB Test: packet #%d was not received\n", + i + 1); else cnt++; } if (cnt != i) { - dev_warn(&adapter->pdev->dev, "LB Test failed\n"); - if (mode != QLCNIC_ILB_MODE) { + dev_err(&adapter->pdev->dev, + "LB Test: failed, TX[%d], RX[%d]\n", i, cnt); + if (mode != QLCNIC_ILB_MODE) dev_warn(&adapter->pdev->dev, - "WARNING: Please make sure external" - "loopback connector is plugged in\n"); - } + "WARNING: Please check loopback cable\n"); return -1; } return 0; @@ -797,20 +931,23 @@ static int qlcnic_loopback_test(struct net_device *netdev, u8 mode) struct qlcnic_adapter *adapter = netdev_priv(netdev); int max_sds_rings = adapter->max_sds_rings; struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_hardware_context *ahw = adapter->ahw; int loop = 0; int ret; - if (!(adapter->ahw->capabilities & - QLCNIC_FW_CAPABILITY_MULTI_LOOPBACK)) { - netdev_info(netdev, "Firmware is not loopback test capable\n"); + if (qlcnic_83xx_check(adapter)) + goto skip_cap; + if (!(ahw->capabilities & QLCNIC_FW_CAPABILITY_MULTI_LOOPBACK)) { + dev_info(&adapter->pdev->dev, + "Firmware do not support loopback test\n"); return -EOPNOTSUPP; } - - QLCDB(adapter, DRV, "%s loopback test in progress\n", - mode == QLCNIC_ILB_MODE ? "internal" : "external"); - if (adapter->ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { - netdev_warn(netdev, "Loopback test not supported for non " - "privilege function\n"); +skip_cap: + dev_warn(&adapter->pdev->dev, "%s loopback test in progress\n", + mode == QLCNIC_ILB_MODE ? "internal" : "external"); + if (ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { + dev_warn(&adapter->pdev->dev, + "Loopback test not supported in nonprivileged mode\n"); return 0; } @@ -822,12 +959,14 @@ static int qlcnic_loopback_test(struct net_device *netdev, u8 mode) goto clear_it; sds_ring = &adapter->recv_ctx->sds_rings[0]; - ret = qlcnic_set_lb_mode(adapter, mode); if (ret) goto free_res; - adapter->ahw->diag_cnt = 0; + if (qlcnic_83xx_check(adapter)) + goto skip_fw_msg; + + ahw->diag_cnt = 0; do { msleep(500); qlcnic_process_rcv_ring_diag(sds_ring); @@ -840,10 +979,22 @@ static int qlcnic_loopback_test(struct net_device *netdev, u8 mode) ret = adapter->ahw->diag_cnt; goto free_res; } - } while (!QLCNIC_IS_LB_CONFIGURED(adapter->ahw->loopback_state)); - + } while (!QLCNIC_IS_LB_CONFIGURED(ahw->loopback_state)); +skip_fw_msg: + if (qlcnic_83xx_check(adapter)) { + /* wait until firmware report link up before running traffic */ + loop = 0; + do { + msleep(500); + if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { + dev_info(&adapter->pdev->dev, + "No linkup event after LB req\n"); + ret = -QLCNIC_FW_NOT_RESPOND; + goto free_res; + } + } while ((adapter->ahw->linkup && ahw->has_link_events) != 1); + } ret = qlcnic_do_lb_test(adapter, mode); - qlcnic_clear_lb_mode(adapter, mode); free_res: @@ -877,20 +1028,18 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test, data[3] = qlcnic_loopback_test(dev, QLCNIC_ILB_MODE); if (data[3]) eth_test->flags |= ETH_TEST_FL_FAILED; - if (eth_test->flags & ETH_TEST_FL_EXTERNAL_LB) { - data[4] = qlcnic_loopback_test(dev, QLCNIC_ELB_MODE); - if (data[4]) - eth_test->flags |= ETH_TEST_FL_FAILED; - eth_test->flags |= ETH_TEST_FL_EXTERNAL_LB_DONE; - } + + data[4] = qlcnic_eeprom_test(dev); + if (data[4]) + eth_test->flags |= ETH_TEST_FL_FAILED; } } static void -qlcnic_get_strings(struct net_device *dev, u32 stringset, u8 * data) +qlcnic_get_strings(struct net_device *dev, u32 stringset, u8 *data) { struct qlcnic_adapter *adapter = netdev_priv(dev); - int index, i, j; + int index, i, num_stats; switch (stringset) { case ETH_SS_TEST: @@ -903,14 +1052,34 @@ qlcnic_get_strings(struct net_device *dev, u32 stringset, u8 * data) qlcnic_gstrings_stats[index].stat_string, ETH_GSTRING_LEN); } - for (j = 0; j < QLCNIC_MAC_STATS_LEN; index++, j++) { - memcpy(data + index * ETH_GSTRING_LEN, - qlcnic_mac_stats_strings[j], - ETH_GSTRING_LEN); + if (qlcnic_83xx_check(adapter)) { + num_stats = ARRAY_SIZE(qlcnic_83xx_tx_stats_strings); + for (i = 0; i < num_stats; i++, index++) + memcpy(data + index * ETH_GSTRING_LEN, + qlcnic_83xx_tx_stats_strings[i], + ETH_GSTRING_LEN); + num_stats = ARRAY_SIZE(qlcnic_83xx_mac_stats_strings); + for (i = 0; i < num_stats; i++, index++) + memcpy(data + index * ETH_GSTRING_LEN, + qlcnic_83xx_mac_stats_strings[i], + ETH_GSTRING_LEN); + num_stats = ARRAY_SIZE(qlcnic_83xx_rx_stats_strings); + for (i = 0; i < num_stats; i++, index++) + memcpy(data + index * ETH_GSTRING_LEN, + qlcnic_83xx_rx_stats_strings[i], + ETH_GSTRING_LEN); + return; + } else { + num_stats = ARRAY_SIZE(qlcnic_83xx_mac_stats_strings); + for (i = 0; i < num_stats; i++, index++) + memcpy(data + index * ETH_GSTRING_LEN, + qlcnic_83xx_mac_stats_strings[i], + ETH_GSTRING_LEN); } if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) return; - for (i = 0; i < QLCNIC_DEVICE_STATS_LEN; index++, i++) { + num_stats = ARRAY_SIZE(qlcnic_device_gstrings_stats); + for (i = 0; i < num_stats; index++, i++) { memcpy(data + index * ETH_GSTRING_LEN, qlcnic_device_gstrings_stats[i], ETH_GSTRING_LEN); @@ -919,89 +1088,84 @@ qlcnic_get_strings(struct net_device *dev, u32 stringset, u8 * data) } static void -qlcnic_fill_stats(int *index, u64 *data, void *stats, int type) +qlcnic_fill_stats(u64 *data, void *stats, int type) { - int ind = *index; - if (type == QLCNIC_MAC_STATS) { struct qlcnic_mac_statistics *mac_stats = (struct qlcnic_mac_statistics *)stats; - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_frames); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_bytes); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_mcast_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_bcast_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_pause_cnt); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_ctrl_pkt); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_64b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_127b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_255b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_511b_pkts); - data[ind++] = - QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_1023b_pkts); - data[ind++] = - QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_1518b_pkts); - data[ind++] = - QLCNIC_FILL_STATS(mac_stats->mac_tx_gt_1518b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_frames); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_bytes); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_mcast_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_bcast_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_pause_cnt); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_ctrl_pkt); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_64b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_127b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_255b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_511b_pkts); - data[ind++] = - QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_1023b_pkts); - data[ind++] = - QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_1518b_pkts); - data[ind++] = - QLCNIC_FILL_STATS(mac_stats->mac_rx_gt_1518b_pkts); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_length_error); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_length_small); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_length_large); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_jabber); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_dropped); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_rx_crc_error); - data[ind++] = QLCNIC_FILL_STATS(mac_stats->mac_align_error); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_frames); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_bytes); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_mcast_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_bcast_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_pause_cnt); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_ctrl_pkt); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_64b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_127b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_255b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_511b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_1023b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_lt_1518b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_tx_gt_1518b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_frames); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_bytes); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_mcast_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_bcast_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_pause_cnt); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_ctrl_pkt); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_64b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_127b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_255b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_511b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_1023b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_lt_1518b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_gt_1518b_pkts); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_length_error); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_length_small); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_length_large); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_jabber); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_dropped); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_rx_crc_error); + *data++ = QLCNIC_FILL_STATS(mac_stats->mac_align_error); } else if (type == QLCNIC_ESW_STATS) { struct __qlcnic_esw_statistics *esw_stats = (struct __qlcnic_esw_statistics *)stats; - data[ind++] = QLCNIC_FILL_STATS(esw_stats->unicast_frames); - data[ind++] = QLCNIC_FILL_STATS(esw_stats->multicast_frames); - data[ind++] = QLCNIC_FILL_STATS(esw_stats->broadcast_frames); - data[ind++] = QLCNIC_FILL_STATS(esw_stats->dropped_frames); - data[ind++] = QLCNIC_FILL_STATS(esw_stats->errors); - data[ind++] = QLCNIC_FILL_STATS(esw_stats->local_frames); - data[ind++] = QLCNIC_FILL_STATS(esw_stats->numbytes); + *data++ = QLCNIC_FILL_STATS(esw_stats->unicast_frames); + *data++ = QLCNIC_FILL_STATS(esw_stats->multicast_frames); + *data++ = QLCNIC_FILL_STATS(esw_stats->broadcast_frames); + *data++ = QLCNIC_FILL_STATS(esw_stats->dropped_frames); + *data++ = QLCNIC_FILL_STATS(esw_stats->errors); + *data++ = QLCNIC_FILL_STATS(esw_stats->local_frames); + *data++ = QLCNIC_FILL_STATS(esw_stats->numbytes); } - - *index = ind; } -static void -qlcnic_get_ethtool_stats(struct net_device *dev, - struct ethtool_stats *stats, u64 * data) +static void qlcnic_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) { struct qlcnic_adapter *adapter = netdev_priv(dev); struct qlcnic_esw_statistics port_stats; struct qlcnic_mac_statistics mac_stats; - int index, ret; - - for (index = 0; index < QLCNIC_STATS_LEN; index++) { - char *p = - (char *)adapter + - qlcnic_gstrings_stats[index].stat_offset; - data[index] = - (qlcnic_gstrings_stats[index].sizeof_stat == - sizeof(u64)) ? *(u64 *)p:(*(u32 *)p); + int index, ret, length, size; + char *p; + + memset(data, 0, stats->n_stats * sizeof(u64)); + length = QLCNIC_STATS_LEN; + for (index = 0; index < length; index++) { + p = (char *)adapter + qlcnic_gstrings_stats[index].stat_offset; + size = qlcnic_gstrings_stats[index].sizeof_stat; + *data++ = (size == sizeof(u64)) ? (*(u64 *)p) : ((*(u32 *)p)); } - /* Retrieve MAC statistics from firmware */ - memset(&mac_stats, 0, sizeof(struct qlcnic_mac_statistics)); - qlcnic_get_mac_stats(adapter, &mac_stats); - qlcnic_fill_stats(&index, data, &mac_stats, QLCNIC_MAC_STATS); + if (qlcnic_83xx_check(adapter)) { + if (adapter->ahw->linkup) + qlcnic_83xx_get_stats(adapter, data); + return; + } else { + /* Retrieve MAC statistics from firmware */ + memset(&mac_stats, 0, sizeof(struct qlcnic_mac_statistics)); + qlcnic_get_mac_stats(adapter, &mac_stats); + qlcnic_fill_stats(data, &mac_stats, QLCNIC_MAC_STATS); + } if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) return; @@ -1012,14 +1176,13 @@ qlcnic_get_ethtool_stats(struct net_device *dev, if (ret) return; - qlcnic_fill_stats(&index, data, &port_stats.rx, QLCNIC_ESW_STATS); - + qlcnic_fill_stats(data, &port_stats.rx, QLCNIC_ESW_STATS); ret = qlcnic_get_port_stats(adapter, adapter->ahw->pci_func, QLCNIC_QUERY_TX_COUNTER, &port_stats.tx); if (ret) return; - qlcnic_fill_stats(&index, data, &port_stats.tx, QLCNIC_ESW_STATS); + qlcnic_fill_stats(data, &port_stats.tx, QLCNIC_ESW_STATS); } static int qlcnic_set_led(struct net_device *dev, @@ -1029,6 +1192,8 @@ static int qlcnic_set_led(struct net_device *dev, int max_sds_rings = adapter->max_sds_rings; int err = -EIO, active = 1; + if (qlcnic_83xx_check(adapter)) + return -EOPNOTSUPP; if (adapter->ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { netdev_warn(dev, "LED test not supported for non " "privilege function\n"); @@ -1095,6 +1260,8 @@ qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct qlcnic_adapter *adapter = netdev_priv(dev); u32 wol_cfg; + if (qlcnic_83xx_check(adapter)) + return; wol->supported = 0; wol->wolopts = 0; @@ -1113,8 +1280,10 @@ qlcnic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct qlcnic_adapter *adapter = netdev_priv(dev); u32 wol_cfg; - if (wol->wolopts & ~WAKE_MAGIC) + if (qlcnic_83xx_check(adapter)) return -EOPNOTSUPP; + if (wol->wolopts & ~WAKE_MAGIC) + return -EINVAL; wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV); if (!(wol_cfg & (1 << adapter->portnum))) @@ -1306,7 +1475,7 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val) return 0; } netdev_info(netdev, "Forcing a FW dump\n"); - qlcnic_dev_request_reset(adapter, 0); + qlcnic_dev_request_reset(adapter, val->flag); break; case QLCNIC_DISABLE_FW_DUMP: if (fw_dump->enable && fw_dump->tmpl_hdr) { @@ -1326,7 +1495,7 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val) return 0; case QLCNIC_FORCE_FW_RESET: netdev_info(netdev, "Forcing a FW reset\n"); - qlcnic_dev_request_reset(adapter, 0); + qlcnic_dev_request_reset(adapter, val->flag); adapter->flags &= ~QLCNIC_FW_RESET_OWNER; return 0; case QLCNIC_SET_QUIESCENT: @@ -1340,8 +1509,8 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val) netdev_err(netdev, "FW dump not supported\n"); return -ENOTSUPP; } - for (i = 0; i < ARRAY_SIZE(FW_DUMP_LEVELS); i++) { - if (val->flag == FW_DUMP_LEVELS[i]) { + for (i = 0; i < ARRAY_SIZE(qlcnic_fw_dump_level); i++) { + if (val->flag == qlcnic_fw_dump_level[i]) { fw_dump->tmpl_hdr->drv_cap_mask = val->flag; netdev_info(netdev, "Driver mask changed to: 0x%x\n", @@ -1385,10 +1554,3 @@ const struct ethtool_ops qlcnic_ethtool_ops = { .get_dump_data = qlcnic_get_dump_data, .set_dump = qlcnic_set_dump, }; - -const struct ethtool_ops qlcnic_ethtool_failed_ops = { - .get_settings = qlcnic_get_settings, - .get_drvinfo = qlcnic_get_drvinfo, - .set_msglevel = qlcnic_set_msglevel, - .get_msglevel = qlcnic_get_msglevel, -}; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index d692aa8..6f5b5eb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -909,7 +909,7 @@ int qlcnic_set_features(struct net_device *netdev, netdev_features_t features) if (!(changed & NETIF_F_LRO)) return 0; - netdev->features = features ^ NETIF_F_LRO; + netdev->features ^= NETIF_F_LRO; if (qlcnic_config_hw_lro(adapter, hw_lro)) return -EIO; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index da04432..e1a3625 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -878,8 +878,8 @@ qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, if (qlcnic_83xx_check(adapter)) return; - features = (NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | NETIF_F_GRO); + features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM | + NETIF_F_IPV6_CSUM | NETIF_F_GRO); vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); @@ -894,12 +894,17 @@ qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, if (esw_cfg->offload_flags & BIT_0) { netdev->features |= features; adapter->rx_csum = 1; - if (!(esw_cfg->offload_flags & BIT_1)) + if (!(esw_cfg->offload_flags & BIT_1)) { netdev->features &= ~NETIF_F_TSO; - if (!(esw_cfg->offload_flags & BIT_2)) + features &= ~NETIF_F_TSO; + } + if (!(esw_cfg->offload_flags & BIT_2)) { netdev->features &= ~NETIF_F_TSO6; + features &= ~NETIF_F_TSO6; + } } else { netdev->features &= ~features; + features &= ~features; adapter->rx_csum = 0; } @@ -1518,7 +1523,10 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test) if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - qlcnic_enable_int(sds_ring); + if (qlcnic_82xx_check(adapter)) + qlcnic_enable_int(sds_ring); + else + qlcnic_83xx_enable_intr(adapter, sds_ring); } } @@ -1605,7 +1613,7 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev, SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops); - netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | + netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO | NETIF_F_HW_VLAN_RX); netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | @@ -1627,6 +1635,7 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev, if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO) netdev->features |= NETIF_F_LRO; + netdev->hw_features = netdev->features; netdev->irq = adapter->msix_entries[0].vector; err = register_netdev(netdev); -- cgit v0.10.2 From 2c6196d2629b7e8236d1c9fb9f2d48e60c82a7ce Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Tue, 1 Jan 2013 03:20:29 +0000 Subject: qlcnic: remove unused definitions from header file Signed-off-by: Shahed Shaikh Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index b637f1e..471982c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -569,43 +569,6 @@ struct qlcnic_recv_context { * the crb QLCNIC_CDRP_CRB_OFFSET. */ #define QLCNIC_CDRP_FORM_CMD(cmd) (QLCNIC_CDRP_CMD_BIT | (cmd)) -#define QLCNIC_CDRP_IS_CMD(cmd) (((cmd) & QLCNIC_CDRP_CMD_BIT) != 0) - -#define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES 0x00000001 -#define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX 0x00000002 -#define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX 0x00000003 -#define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX 0x00000004 -#define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX 0x00000005 -#define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX 0x00000006 -#define QLCNIC_CDRP_CMD_CREATE_RX_CTX 0x00000007 -#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX 0x00000008 -#define QLCNIC_CDRP_CMD_CREATE_TX_CTX 0x00000009 -#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX 0x0000000a -#define QLCNIC_CDRP_CMD_INTRPT_TEST 0x00000011 -#define QLCNIC_CDRP_CMD_SET_MTU 0x00000012 -#define QLCNIC_CDRP_CMD_READ_PHY 0x00000013 -#define QLCNIC_CDRP_CMD_WRITE_PHY 0x00000014 -#define QLCNIC_CDRP_CMD_READ_HW_REG 0x00000015 -#define QLCNIC_CDRP_CMD_GET_FLOW_CTL 0x00000016 -#define QLCNIC_CDRP_CMD_SET_FLOW_CTL 0x00000017 -#define QLCNIC_CDRP_CMD_READ_MAX_MTU 0x00000018 -#define QLCNIC_CDRP_CMD_READ_MAX_LRO 0x00000019 -#define QLCNIC_CDRP_CMD_MAC_ADDRESS 0x0000001f - -#define QLCNIC_CDRP_CMD_GET_PCI_INFO 0x00000020 -#define QLCNIC_CDRP_CMD_GET_NIC_INFO 0x00000021 -#define QLCNIC_CDRP_CMD_SET_NIC_INFO 0x00000022 -#define QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY 0x00000024 -#define QLCNIC_CDRP_CMD_TOGGLE_ESWITCH 0x00000025 -#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS 0x00000026 -#define QLCNIC_CDRP_CMD_SET_PORTMIRRORING 0x00000027 -#define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH 0x00000028 -#define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG 0x00000029 -#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS 0x0000002a -#define QLCNIC_CDRP_CMD_CONFIG_PORT 0x0000002E -#define QLCNIC_CDRP_CMD_TEMP_SIZE 0x0000002f -#define QLCNIC_CDRP_CMD_GET_TEMP_HDR 0x00000030 -#define QLCNIC_CDRP_CMD_GET_MAC_STATS 0x00000037 #define QLCNIC_RCODE_SUCCESS 0 #define QLCNIC_RCODE_INVALID_ARGS 6 @@ -1086,7 +1049,6 @@ struct qlcnic_info { u16 switch_mode; u32 capabilities; u8 max_mac_filters; - u8 reserved1; u16 max_mtu; u16 max_tx_ques; u16 max_rx_ques; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index d8008c0..f65fd7b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -174,11 +174,9 @@ static int qlcnic_dev_statistics_len(struct qlcnic_adapter *adapter) #define QLCNIC_MAX_EEPROM_LEN 1024 static const u32 diag_registers[] = { - CRB_CMDPEG_STATE, - CRB_RCVPEG_STATE, - CRB_XG_STATE_P3P, - CRB_FW_CAPABILITIES_1, - ISR_INT_STATE_REG, + QLCNIC_CMDPEG_STATE, + QLCNIC_RCVPEG_STATE, + QLCNIC_FW_CAPABILITIES, QLCNIC_CRB_DRV_ACTIVE, QLCNIC_CRB_DEV_STATE, QLCNIC_CRB_DRV_STATE, @@ -191,6 +189,7 @@ static const u32 diag_registers[] = { -1 }; + static const u32 ext_diag_registers[] = { CRB_XG_STATE_P3P, ISR_INT_STATE_REG, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h index 458b9ae..74f7711 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h @@ -389,9 +389,6 @@ enum { #define QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT (ROMUSB_ROM + 0x0014) #define QLCNIC_ROMUSB_ROM_RDATA (ROMUSB_ROM + 0x0018) -/* Lock IDs for ROM lock */ -#define ROM_LOCK_DRIVER 0x0d417340 - /****************************************************************************** * * Definitions specific to M25P flash @@ -451,13 +448,10 @@ enum { #define ISR_INT_TARGET_STATUS_F7 (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F7)) #define ISR_INT_TARGET_MASK_F7 (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F7)) -#define QLCNIC_PCI_MN_2M (0) -#define QLCNIC_PCI_MS_2M (0x80000) #define QLCNIC_PCI_OCM0_2M (0x000c0000UL) #define QLCNIC_PCI_CRBSPACE (0x06000000UL) #define QLCNIC_PCI_CAMQM (0x04800000UL) #define QLCNIC_PCI_CAMQM_END (0x04800800UL) -#define QLCNIC_PCI_2MB_SIZE (0x00200000UL) #define QLCNIC_PCI_CAMQM_2M_BASE (0x000ff800UL) #define QLCNIC_CRB_CAM QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_CAM) @@ -501,44 +495,6 @@ enum { #define TA_CTL_WRITE BIT_2 #define TA_CTL_BUSY BIT_3 -/* - * Register offsets for MN - */ -#define MIU_TEST_AGT_BASE (0x90) - -#define MIU_TEST_AGT_ADDR_LO (0x04) -#define MIU_TEST_AGT_ADDR_HI (0x08) -#define MIU_TEST_AGT_WRDATA_LO (0x10) -#define MIU_TEST_AGT_WRDATA_HI (0x14) -#define MIU_TEST_AGT_WRDATA_UPPER_LO (0x20) -#define MIU_TEST_AGT_WRDATA_UPPER_HI (0x24) -#define MIU_TEST_AGT_WRDATA(i) (0x10+(0x10*((i)>>1))+(4*((i)&1))) -#define MIU_TEST_AGT_RDDATA_LO (0x18) -#define MIU_TEST_AGT_RDDATA_HI (0x1c) -#define MIU_TEST_AGT_RDDATA_UPPER_LO (0x28) -#define MIU_TEST_AGT_RDDATA_UPPER_HI (0x2c) -#define MIU_TEST_AGT_RDDATA(i) (0x18+(0x10*((i)>>1))+(4*((i)&1))) - -#define MIU_TEST_AGT_ADDR_MASK 0xfffffff8 -#define MIU_TEST_AGT_UPPER_ADDR(off) (0) - -/* - * Register offsets for MS - */ -#define SIU_TEST_AGT_BASE (0x60) - -#define SIU_TEST_AGT_ADDR_LO (0x04) -#define SIU_TEST_AGT_ADDR_HI (0x18) -#define SIU_TEST_AGT_WRDATA_LO (0x08) -#define SIU_TEST_AGT_WRDATA_HI (0x0c) -#define SIU_TEST_AGT_WRDATA(i) (0x08+(4*(i))) -#define SIU_TEST_AGT_RDDATA_LO (0x10) -#define SIU_TEST_AGT_RDDATA_HI (0x14) -#define SIU_TEST_AGT_RDDATA(i) (0x10+(4*(i))) - -#define SIU_TEST_AGT_ADDR_MASK 0x3ffff8 -#define SIU_TEST_AGT_UPPER_ADDR(off) ((off)>>22) - /* XG Link status */ #define XG_LINK_UP 0x10 #define XG_LINK_DOWN 0x20 @@ -558,9 +514,6 @@ enum { #define QLCNIC_CAM_RAM_BASE (QLCNIC_CRB_CAM + 0x02000) #define QLCNIC_CAM_RAM(reg) (QLCNIC_CAM_RAM_BASE + (reg)) -#define QLCNIC_FW_VERSION_MAJOR (QLCNIC_CAM_RAM(0x150)) -#define QLCNIC_FW_VERSION_MINOR (QLCNIC_CAM_RAM(0x154)) -#define QLCNIC_FW_VERSION_SUB (QLCNIC_CAM_RAM(0x158)) #define QLCNIC_ROM_LOCK_ID (QLCNIC_CAM_RAM(0x100)) #define QLCNIC_PHY_LOCK_ID (QLCNIC_CAM_RAM(0x120)) #define QLCNIC_CRB_WIN_LOCK_ID (QLCNIC_CAM_RAM(0x124)) @@ -574,27 +527,13 @@ enum { #define QLCNIC_CDRP_ARG(i) (QLCNIC_REG(0x18 + ((i) * 4))) #define QLCNIC_CDRP_CRB_OFFSET (QLCNIC_REG(0x18)) -#define QLCNIC_ARG1_CRB_OFFSET (QLCNIC_REG(0x1c)) -#define QLCNIC_ARG2_CRB_OFFSET (QLCNIC_REG(0x20)) -#define QLCNIC_ARG3_CRB_OFFSET (QLCNIC_REG(0x24)) #define QLCNIC_SIGN_CRB_OFFSET (QLCNIC_REG(0x28)) -#define CRB_CMDPEG_STATE (QLCNIC_REG(0x50)) -#define CRB_RCVPEG_STATE (QLCNIC_REG(0x13c)) - #define CRB_XG_STATE_P3P (QLCNIC_REG(0x98)) #define CRB_PF_LINK_SPEED_1 (QLCNIC_REG(0xe8)) -#define CRB_PF_LINK_SPEED_2 (QLCNIC_REG(0xec)) - -#define CRB_TEMP_STATE (QLCNIC_REG(0x1b4)) - -#define CRB_V2P_0 (QLCNIC_REG(0x290)) -#define CRB_V2P(port) (CRB_V2P_0+((port)*4)) #define CRB_DRIVER_VERSION (QLCNIC_REG(0x2a0)) -#define CRB_FW_CAPABILITIES_1 (QLCNIC_CAM_RAM(0x128)) #define CRB_FW_CAPABILITIES_2 (QLCNIC_CAM_RAM(0x12c)) -#define CRB_MAC_BLOCK_START (QLCNIC_CAM_RAM(0x1c0)) /* * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address @@ -621,11 +560,6 @@ enum { /* Lock IDs for PHY lock */ #define PHY_LOCK_DRIVER 0x44524956 -/* Used for PS PCI Memory access */ -#define PCIX_PS_OP_ADDR_LO (0x10000) -/* via CRB (PS side only) */ -#define PCIX_PS_OP_ADDR_HI (0x10004) - #define PCIX_INT_VECTOR (0x10100) #define PCIX_INT_MASK (0x10104) @@ -687,17 +621,6 @@ enum { #define QLCNIC_PEG_TUNE_CAPABILITY (QLCNIC_CAM_RAM(0x02c)) #define QLCNIC_DMA_WATCHDOG_CTRL (QLCNIC_CAM_RAM(0x14)) -#define QLCNIC_PEG_ALIVE_COUNTER (QLCNIC_CAM_RAM(0xb0)) -#define QLCNIC_PEG_HALT_STATUS1 (QLCNIC_CAM_RAM(0xa8)) -#define QLCNIC_PEG_HALT_STATUS2 (QLCNIC_CAM_RAM(0xac)) -#define QLCNIC_CRB_DRV_ACTIVE (QLCNIC_CAM_RAM(0x138)) -#define QLCNIC_CRB_DEV_STATE (QLCNIC_CAM_RAM(0x140)) - -#define QLCNIC_CRB_DRV_STATE (QLCNIC_CAM_RAM(0x144)) -#define QLCNIC_CRB_DRV_SCRATCH (QLCNIC_CAM_RAM(0x148)) -#define QLCNIC_CRB_DEV_PARTITION_INFO (QLCNIC_CAM_RAM(0x14c)) -#define QLCNIC_CRB_DRV_IDC_VER (QLCNIC_CAM_RAM(0x174)) -#define QLCNIC_CRB_DEV_NPAR_STATE (QLCNIC_CAM_RAM(0x19c)) #define QLCNIC_ROM_DEV_INIT_TIMEOUT (0x3e885c) #define QLCNIC_ROM_DRV_RESET_TIMEOUT (0x3e8860) @@ -716,7 +639,6 @@ enum { #define QLCNIC_DEV_NPAR_OPER 1 /* NPAR Operational */ #define QLCNIC_DEV_NPAR_OPER_TIMEO 30 /* Operational time out */ -#define QLC_DEV_CHECK_ACTIVE(VAL, FN) ((VAL) & (1 << (FN * 4))) #define QLC_DEV_SET_REF_CNT(VAL, FN) ((VAL) |= (1 << (FN * 4))) #define QLC_DEV_CLR_REF_CNT(VAL, FN) ((VAL) &= ~(1 << (FN * 4))) #define QLC_DEV_SET_RST_RDY(VAL, FN) ((VAL) |= (1 << (FN * 4))) @@ -774,26 +696,13 @@ struct qlcnic_legacy_intr_set { u32 pci_int_reg; }; -#define QLCNIC_FW_API 0x1b216c -#define QLCNIC_DRV_OP_MODE 0x1b2170 #define QLCNIC_MSIX_BASE 0x132110 #define QLCNIC_MAX_PCI_FUNC 8 #define QLCNIC_MAX_VLAN_FILTERS 64 -/* FW dump defines */ -#define MIU_TEST_CTR 0x41000090 -#define MIU_TEST_ADDR_LO 0x41000094 -#define MIU_TEST_ADDR_HI 0x41000098 #define FLASH_ROM_WINDOW 0x42110030 #define FLASH_ROM_DATA 0x42150000 - -static const u32 FW_DUMP_LEVELS[] = { - 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; - -static const u32 MIU_TEST_READ_DATA[] = { - 0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC, }; - #define QLCNIC_FW_DUMP_REG1 0x00130060 #define QLCNIC_FW_DUMP_REG2 0x001e0000 #define QLCNIC_FLASH_SEM2_LK 0x0013C010 -- cgit v0.10.2 From dc8ba109064b1473293402921169dc96aff7e691 Mon Sep 17 00:00:00 2001 From: "Signed-off-by: Sony Chacko" Date: Tue, 1 Jan 2013 03:20:30 +0000 Subject: qlcnic: update driver version Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 471982c..893cbe8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -38,8 +38,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 30 -#define QLCNIC_LINUX_VERSIONID "5.0.30" +#define _QLCNIC_LINUX_SUBVERSION 31 +#define QLCNIC_LINUX_VERSIONID "5.1.31" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v0.10.2 From 47caf255244739459a76aad76cb6dacb28640cf3 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 2 Jan 2013 17:23:53 +0000 Subject: qlcnic: do not duplicate infrastructure functions Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index e1a3625..3bdb1beae 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2,12 +2,6 @@ * QLogic qlcnic NIC Driver * Copyright (c) 2009-2010 QLogic Corporation * - * PCI searching functions pci_get_domain_bus_and_slot & pci_channel_offline - * Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter, - * David Mosberger-Tang - * Copyright (C) 1997 -- 2000 Martin Mares - * Copyright (C) 2003 -- 2004 Greg Kroah-Hartman . - * * See LICENSE.qlcnic for copyright and licensing details. */ @@ -25,6 +19,7 @@ #include #include #include +#include MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver"); MODULE_LICENSE("GPL"); @@ -2907,19 +2902,6 @@ reschedule: qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY); } -struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus, - unsigned int devfn) -{ - struct pci_dev *dev = NULL; - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - if (pci_domain_nr(dev->bus) == domain && - (dev->bus->number == bus && dev->devfn == devfn)) - return dev; - } - return NULL; -} - static int qlcnic_is_first_func(struct pci_dev *pdev) { struct pci_dev *oth_pdev; -- cgit v0.10.2 From f8ca2b6f03499379926a3a4f20f3c193325949b3 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Wed, 2 Jan 2013 23:10:15 +0000 Subject: qlcnic: fix build error Fix the following error reported by kbuild test robot. static declaration of 'qlcnic_restore_indev_addr' follows non-static declaration. Signed-off-by: Shahed Shaikh Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 3bdb1beae..137ca13 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3281,8 +3281,7 @@ static struct notifier_block qlcnic_inetaddr_cb = { .notifier_call = qlcnic_inetaddr_event, }; #else -static void -qlcnic_restore_indev_addr(struct net_device *dev, unsigned long event) +void qlcnic_restore_indev_addr(struct net_device *dev, unsigned long event) { } #endif static struct pci_error_handlers qlcnic_err_handler = { -- cgit v0.10.2 From 06a7fc429f00a90c03d677d8c5ae09f0db6bf87d Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Sun, 30 Dec 2012 08:27:29 +0000 Subject: team: update master carrier state Update master's carrier state when there is any change with its ports. Signed-off-by: Flavio Leitner Acked-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 918a901..78c7d87 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1400,13 +1400,11 @@ static void team_destructor(struct net_device *dev) static int team_open(struct net_device *dev) { - netif_carrier_on(dev); return 0; } static int team_close(struct net_device *dev) { - netif_carrier_off(dev); return 0; } @@ -2560,21 +2558,43 @@ send_event: } +static void __team_carrier_check(struct team *team) +{ + struct team_port *port; + bool team_linkup; + + team_linkup = false; + list_for_each_entry(port, &team->port_list, list) { + if (port->linkup) { + team_linkup = true; + break; + } + } + + if (team_linkup) + netif_carrier_on(team->dev); + else + netif_carrier_off(team->dev); +} + static void __team_port_change_check(struct team_port *port, bool linkup) { if (port->state.linkup != linkup) __team_port_change_send(port, linkup); + __team_carrier_check(port->team); } static void __team_port_change_port_added(struct team_port *port, bool linkup) { __team_port_change_send(port, linkup); + __team_carrier_check(port->team); } static void __team_port_change_port_removed(struct team_port *port) { port->removed = true; __team_port_change_send(port, false); + __team_carrier_check(port->team); } static void team_port_change_check(struct team_port *port, bool linkup) -- cgit v0.10.2 From bc0784d951470ca6597239f1bae6e59caf49fb10 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Wed, 12 Dec 2012 16:56:20 -0800 Subject: mac80211: Allow disabling SGI-20 This allows user-space (wpa_supplicant) to disable short guard interval (SGI) for 20Mhz. The SGI-40 disable option is already handled. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index a71d891..8a6d68f 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -62,6 +62,9 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_SUP_WIDTH_20_40); __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_SGI_40); + /* Allow user to disable SGI-20 (SGI-40 is handled above) */ + __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_SGI_20); + /* Allow user to disable the max-AMSDU bit. */ __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_MAX_AMSDU); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 1b087ff..0c0d4ca 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -537,6 +537,7 @@ static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_MAX_AMSDU | + IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40), .mcs = { .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff, -- cgit v0.10.2 From f4eabc918c3b88763bc20dd9e2b248aa6c757005 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 13 Dec 2012 18:59:57 +0800 Subject: mac80211: use short slot time in mesh for 5GHz Use short slot time in 5GHz for mesh. The performance is increased from 16.4Mbps to 23.4Mbps for two directly connected mesh STAs operating in legacy rate using iperf measurement. Almost similar to the results claimed in IBSS mode. Signed-off-by: Chun-Yeow Yeoh [call ieee80211_get_sdata_band() only once] Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 649ad51..8565c00 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -607,6 +607,12 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; + u32 changed = BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_HT | + BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT; + enum ieee80211_band band = ieee80211_get_sdata_band(sdata); local->fif_other_bss++; /* mesh ifaces must set allmulti to forward mcast traffic */ @@ -626,13 +632,14 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) ifmsh->mshcfg.ht_opmode; sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; sdata->vif.bss_conf.basic_rates = - ieee80211_mandatory_rates(sdata->local, - ieee80211_get_sdata_band(sdata)); - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED | - BSS_CHANGED_HT | - BSS_CHANGED_BASIC_RATES | - BSS_CHANGED_BEACON_INT); + ieee80211_mandatory_rates(local, band); + + if (band == IEEE80211_BAND_5GHZ) { + sdata->vif.bss_conf.use_short_slot = true; + changed |= BSS_CHANGED_ERP_SLOT; + } + + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); } -- cgit v0.10.2 From a357d7f9855e3002d6aaaea5c40dd1ac02b78de7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 10 Dec 2012 11:57:42 +0100 Subject: mac80211_hwsim: allow testing paged RX Paged RX, i.e. SKBs with (some of) the data in pages instead of the SKB header data (skb->data) can behave differently in the stack and cause other bugs. To make debugging easier add an option to hwsim to test with such SKBs. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index ff90855..145498f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -48,6 +48,10 @@ static int channels = 1; module_param(channels, int, 0444); MODULE_PARM_DESC(channels, "Number of concurrent channels"); +static bool paged_rx = false; +module_param(paged_rx, bool, 0644); +MODULE_PARM_DESC(paged_rx, "Use paged SKBs for RX instead of linear ones"); + /** * enum hwsim_regtest - the type of regulatory tests we offer * @@ -755,9 +759,25 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, * reserve some space for our vendor and the normal * radiotap header, since we're copying anyway */ - nskb = skb_copy_expand(skb, 64, 0, GFP_ATOMIC); - if (nskb == NULL) - continue; + if (skb->len < PAGE_SIZE && paged_rx) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + continue; + + nskb = dev_alloc_skb(128); + if (!nskb) { + __free_page(page); + continue; + } + + memcpy(page_address(page), skb->data, skb->len); + skb_add_rx_frag(nskb, 0, page, 0, skb->len, skb->len); + } else { + nskb = skb_copy(skb, GFP_ATOMIC); + if (!nskb) + continue; + } if (mac80211_hwsim_addr_match(data2, hdr->addr1)) ack = true; -- cgit v0.10.2 From 0f6dfcee2e081f47a3e97cb8984fb4d62217e6f7 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 18 Dec 2012 09:55:33 +0200 Subject: wireless: more 'capability info' bits define bits for 'capability info', as in recent spec edition IEEE802.11-2012 Also, add mask for 2-bit field 'bss type', as it is in 802.11ad Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index f0859cc..09879eb 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1311,16 +1311,21 @@ struct ieee80211_vht_operation { #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) #define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) +#define WLAN_CAPABILITY_APSD (1<<11) +#define WLAN_CAPABILITY_RADIO_MEASURE (1<<12) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) +#define WLAN_CAPABILITY_DEL_BACK (1<<14) +#define WLAN_CAPABILITY_IMM_BACK (1<<15) /* DMG (60gHz) 802.11ad */ /* type - bits 0..1 */ +#define WLAN_CAPABILITY_DMG_TYPE_MASK (3<<0) #define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */ #define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */ #define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */ #define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2) -#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) +#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) #define WLAN_CAPABILITY_DMG_PRIVACY (1<<4) #define WLAN_CAPABILITY_DMG_ECPAC (1<<5) -- cgit v0.10.2 From b998e8bb3e1c6eeae5eab9d6a434563270286c3b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:07:46 +0100 Subject: mac80211: remove final sta_info_flush() When all interfaces have been removed, there can't be any stations left over, so there's no need to flush again. Remove this, and all code associated with it, which also simplifies the function. Tested-by: Ben Greear Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 47e0aca..be01953 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1010,8 +1010,8 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree_rcu(old_probe_resp, rcu_head); list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - sta_info_flush(local, vlan); - sta_info_flush(local, sdata); + sta_info_flush(vlan); + sta_info_flush(sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); @@ -1301,7 +1301,6 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac) { - struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -1309,7 +1308,7 @@ static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, if (mac) return sta_info_destroy_addr_bss(sdata, mac); - sta_info_flush(local, sdata); + sta_info_flush(sdata); return 0; } diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 6b7644e..854de97 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -67,7 +67,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, skb_reserve(skb, sdata->local->hw.extra_tx_headroom); if (!ether_addr_equal(ifibss->bssid, bssid)) - sta_info_flush(sdata->local, sdata); + sta_info_flush(sdata); /* if merging, indicate to driver that we leave the old IBSS */ if (sdata->vif.bss_conf.ibss_joined) { @@ -1182,7 +1182,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) memset(ifibss->bssid, 0, ETH_ALEN); ifibss->ssid_len = 0; - sta_info_flush(sdata->local, sdata); + sta_info_flush(sdata); spin_lock_bh(&ifibss->incomplete_lock); while (!list_empty(&ifibss->incomplete_stations)) { diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8be854e..ecf7d15 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -776,7 +776,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * all other modes we've already removed all stations when * disconnecting etc. */ - sta_info_flush(local, sdata); + sta_info_flush(sdata); /* * Don't count this interface for promisc/allmulti while it @@ -961,7 +961,6 @@ static void ieee80211_set_multicast_list(struct net_device *dev) */ static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) { - struct ieee80211_local *local = sdata->local; int flushed; int i; @@ -977,7 +976,7 @@ static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) if (ieee80211_vif_is_mesh(&sdata->vif)) mesh_rmc_free(sdata); - flushed = sta_info_flush(local, sdata); + flushed = sta_info_flush(sdata); WARN_ON(flushed); } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 8565c00..8a9d5d0 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -656,7 +656,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); /* flush STAs and mpaths on this iface */ - sta_info_flush(sdata->local, sdata); + sta_info_flush(sdata); mesh_path_flush_by_iface(sdata); del_timer_sync(&sdata->u.mesh.housekeeping_timer); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a355292..6d61d2f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1521,7 +1521,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, memset(ifmgd->bssid, 0, ETH_ALEN); /* remove AP and TDLS peers */ - sta_info_flush(local, sdata); + sta_info_flush(sdata); /* finally reset all BSS / config parameters */ changed |= ieee80211_reset_erp_info(sdata); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index ca9fde1..d743645 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -885,7 +885,6 @@ void sta_info_init(struct ieee80211_local *local) void sta_info_stop(struct ieee80211_local *local) { del_timer_sync(&local->sta_cleanup); - sta_info_flush(local, NULL); } /** @@ -893,12 +892,11 @@ void sta_info_stop(struct ieee80211_local *local) * * Returns the number of removed STA entries. * - * @local: local interface data - * @sdata: matching rule for the net device (sta->dev) or %NULL to match all STAs + * @sdata: sdata to remove all stations from */ -int sta_info_flush(struct ieee80211_local *local, - struct ieee80211_sub_if_data *sdata) +int sta_info_flush(struct ieee80211_sub_if_data *sdata) { + struct ieee80211_local *local = sdata->local; struct sta_info *sta, *tmp; int ret = 0; @@ -906,7 +904,7 @@ int sta_info_flush(struct ieee80211_local *local, mutex_lock(&local->sta_mtx); list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { - if (!sdata || sdata == sta->sdata) { + if (sdata == sta->sdata) { WARN_ON(__sta_info_destroy(sta)); ret++; } @@ -915,17 +913,8 @@ int sta_info_flush(struct ieee80211_local *local, rcu_barrier(); - if (sdata) { - ieee80211_cleanup_sdata_stas(sdata); - cancel_work_sync(&sdata->cleanup_stations_wk); - } else { - mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - ieee80211_cleanup_sdata_stas(sdata); - cancel_work_sync(&sdata->cleanup_stations_wk); - } - mutex_unlock(&local->iflist_mtx); - } + ieee80211_cleanup_sdata_stas(sdata); + cancel_work_sync(&sdata->cleanup_stations_wk); return ret; } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 37c1889..13698da 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -548,8 +548,7 @@ void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); -int sta_info_flush(struct ieee80211_local *local, - struct ieee80211_sub_if_data *sdata); +int sta_info_flush(struct ieee80211_sub_if_data *sdata); void sta_set_rate_info_tx(struct sta_info *sta, const struct ieee80211_tx_rate *rate, struct rate_info *rinfo); -- cgit v0.10.2 From 09f4114e02aac9cbf40553a17580b07ab29715d8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:26:57 +0100 Subject: mac80211: warn if unexpectedly removing stations When an interface is brought down it must have been disconnected (or similar) in all modes other than WDS, so warn if any stations were removed in other modes. Tested-by: Ben Greear Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ecf7d15..604b4aa 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -747,7 +747,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, unsigned long flags; struct sk_buff *skb, *tmp; u32 hw_reconf_flags = 0; - int i; + int i, flushed; clear_bit(SDATA_STATE_RUNNING, &sdata->state); @@ -772,11 +772,13 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * (because if we remove a STA after ops->remove_interface() * the driver will have removed the vif info already!) * - * This is relevant only in AP, WDS and mesh modes, since in - * all other modes we've already removed all stations when - * disconnecting etc. + * This is relevant only in WDS mode, in all other modes we've + * already removed all stations when disconnecting or similar, + * so warn otherwise. */ - sta_info_flush(sdata); + flushed = sta_info_flush(sdata); + WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || + (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); /* * Don't count this interface for promisc/allmulti while it -- cgit v0.10.2 From 051007d9e281cd8ea603a4cc4c96b0170b26c7e9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:49:02 +0100 Subject: mac80211: optimise roaming time again The last fixes re-added the RCU synchronize penalty on roaming to fix the races. Split up sta_info_flush() now to get rid of that again, and let managed mode (and only it) delay the actual destruction. Tested-by: Ben Greear Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 604b4aa..12341ef 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -775,8 +775,10 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * This is relevant only in WDS mode, in all other modes we've * already removed all stations when disconnecting or similar, * so warn otherwise. + * + * We call sta_info_flush_cleanup() later, to combine RCU waits. */ - flushed = sta_info_flush(sdata); + flushed = sta_info_flush_defer(sdata); WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); @@ -861,11 +863,14 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->work); /* * When we get here, the interface is marked down. - * Call synchronize_rcu() to wait for the RX path - * should it be using the interface and enqueuing - * frames at this very time on another CPU. + * sta_info_flush_cleanup() calls rcu_barrier to + * wait for the station call_rcu() calls to complete, + * here we require it to wait for the RX path in case + * it is using the interface and enqueuing frames at + * this very time on another CPU. */ - synchronize_rcu(); + sta_info_flush_cleanup(sdata); + skb_queue_purge(&sdata->skb_queue); /* diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6d61d2f..3cf85d8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1521,7 +1521,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, memset(ifmgd->bssid, 0, ETH_ALEN); /* remove AP and TDLS peers */ - sta_info_flush(sdata); + sta_info_flush_defer(sdata); /* finally reset all BSS / config parameters */ changed |= ieee80211_reset_erp_info(sdata); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index d743645..7199b9d 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -104,6 +104,16 @@ static void cleanup_single_sta(struct sta_info *sta) * neither mac80211 nor the driver can reference this * sta struct any more except by still existing timers * associated with this station that we clean up below. + * + * Note though that this still uses the sdata and even + * calls the driver in AP and mesh mode, so interfaces + * of those types mush use call sta_info_flush_cleanup() + * (typically via sta_info_flush()) before deconfiguring + * the driver. + * + * In station mode, nothing happens here so it doesn't + * have to (and doesn't) do that, this is intentional to + * speed up roaming. */ if (test_sta_flag(sta, WLAN_STA_PS_STA)) { @@ -887,14 +897,8 @@ void sta_info_stop(struct ieee80211_local *local) del_timer_sync(&local->sta_cleanup); } -/** - * sta_info_flush - flush matching STA entries from the STA table - * - * Returns the number of removed STA entries. - * - * @sdata: sdata to remove all stations from - */ -int sta_info_flush(struct ieee80211_sub_if_data *sdata) + +int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sta_info *sta, *tmp; @@ -911,12 +915,15 @@ int sta_info_flush(struct ieee80211_sub_if_data *sdata) } mutex_unlock(&local->sta_mtx); + return ret; +} + +void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata) +{ rcu_barrier(); ieee80211_cleanup_sdata_stas(sdata); cancel_work_sync(&sdata->cleanup_stations_wk); - - return ret; } void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 13698da..c3266aed 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -548,7 +548,25 @@ void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); -int sta_info_flush(struct ieee80211_sub_if_data *sdata); +int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata); +void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata); + +/** + * sta_info_flush - flush matching STA entries from the STA table + * + * Returns the number of removed STA entries. + * + * @sdata: sdata to remove all stations from + */ +static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata) +{ + int ret = sta_info_flush_defer(sdata); + + sta_info_flush_cleanup(sdata); + + return ret; +} + void sta_set_rate_info_tx(struct sta_info *sta, const struct ieee80211_tx_rate *rate, struct rate_info *rinfo); -- cgit v0.10.2 From 10ff57f98d5fccb9bb508ba30230e5df030d67e3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 15 Dec 2012 09:45:50 +0100 Subject: mac80211: remove a bit of dead mesh code In a file that's only built when CONFIG_MAC80211_MESH is defined, having an #ifdef on the same is entirely pointless, so remove it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 8a9d5d0..c0008d5 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -20,16 +20,11 @@ int mesh_allocated; static struct kmem_cache *rm_cache; -#ifdef CONFIG_MAC80211_MESH bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) { return (mgmt->u.action.u.mesh_action.action_code == WLAN_MESH_ACTION_HWMP_PATH_SELECTION); } -#else -bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) -{ return false; } -#endif void ieee80211s_init(void) { -- cgit v0.10.2 From 8a57fff0c178febbe28669a0ef68a8e3460a7589 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 17:03:17 +0100 Subject: regulatory: don't write past array when intersecting rules When intersecting rules, we count first to know how many rules need to be allocated, and then do the intersection into the allocated array. However, the code doing this writes past the end of the array because it attempts to do all intersections. Make it stop when the right number of rules has been reached. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6e53089..40646e8 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -647,9 +647,9 @@ static struct ieee80211_regdomain *regdom_intersect( if (!rd) return NULL; - for (x = 0; x < rd1->n_reg_rules; x++) { + for (x = 0; x < rd1->n_reg_rules && rule_idx < num_rules; x++) { rule1 = &rd1->reg_rules[x]; - for (y = 0; y < rd2->n_reg_rules; y++) { + for (y = 0; y < rd2->n_reg_rules && rule_idx < num_rules; y++) { rule2 = &rd2->reg_rules[y]; /* * This time around instead of using the stack lets -- cgit v0.10.2 From 82f20856304319d5a931846e0269eb911d52a905 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 12:49:16 +0100 Subject: regulatory: don't allocate too much memory There's no need to allocate one reg rule more than will be used, reduce the allocations. The allocation in nl80211 already doesn't allocate too much space. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 40646e8..62bf212 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -318,8 +318,9 @@ static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, int size_of_regd = 0; unsigned int i; - size_of_regd = sizeof(struct ieee80211_regdomain) + - ((src_regd->n_reg_rules + 1) * sizeof(struct ieee80211_reg_rule)); + size_of_regd = + sizeof(struct ieee80211_regdomain) + + src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule); regd = kzalloc(size_of_regd, GFP_KERNEL); if (!regd) @@ -641,7 +642,7 @@ static struct ieee80211_regdomain *regdom_intersect( return NULL; size_of_regd = sizeof(struct ieee80211_regdomain) + - ((num_rules + 1) * sizeof(struct ieee80211_reg_rule)); + num_rules * sizeof(struct ieee80211_reg_rule); rd = kzalloc(size_of_regd, GFP_KERNEL); if (!rd) -- cgit v0.10.2 From 74f53cd8d4474f9ba91c7309feabebae80a60089 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 17:26:17 +0100 Subject: regulatory: clean up regdom_intersect As the dummy_rule (also renamed from irule) is only used for output by the reg_rules_intersect() function there's no need to clear it at all, remove that. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 62bf212..d52ffa2 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -608,12 +608,7 @@ static struct ieee80211_regdomain *regdom_intersect( struct ieee80211_reg_rule *intersected_rule; struct ieee80211_regdomain *rd; /* This is just a dummy holder to help us count */ - struct ieee80211_reg_rule irule; - - /* Uses the stack temporarily for counter arithmetic */ - intersected_rule = &irule; - - memset(intersected_rule, 0, sizeof(struct ieee80211_reg_rule)); + struct ieee80211_reg_rule dummy_rule; if (!rd1 || !rd2) return NULL; @@ -630,11 +625,8 @@ static struct ieee80211_regdomain *regdom_intersect( rule1 = &rd1->reg_rules[x]; for (y = 0; y < rd2->n_reg_rules; y++) { rule2 = &rd2->reg_rules[y]; - if (!reg_rules_intersect(rule1, rule2, - intersected_rule)) + if (!reg_rules_intersect(rule1, rule2, &dummy_rule)) num_rules++; - memset(intersected_rule, 0, - sizeof(struct ieee80211_reg_rule)); } } -- cgit v0.10.2 From e9763c3c295a8b31316e16558b58b226e005b160 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 16:59:46 +0100 Subject: regulatory: clean up reg_copy_regd() Use ERR_PTR/IS_ERR to return the result or errors, also do some code cleanups. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index d52ffa2..52a3598 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -311,11 +311,11 @@ static bool is_user_regdom_saved(void) return true; } -static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, - const struct ieee80211_regdomain *src_regd) +static const struct ieee80211_regdomain * +reg_copy_regd(const struct ieee80211_regdomain *src_regd) { struct ieee80211_regdomain *regd; - int size_of_regd = 0; + int size_of_regd; unsigned int i; size_of_regd = @@ -324,16 +324,15 @@ static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, regd = kzalloc(size_of_regd, GFP_KERNEL); if (!regd) - return -ENOMEM; + return ERR_PTR(-ENOMEM); memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); for (i = 0; i < src_regd->n_reg_rules; i++) memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], - sizeof(struct ieee80211_reg_rule)); + sizeof(struct ieee80211_reg_rule)); - *dst_regd = regd; - return 0; + return regd; } #ifdef CONFIG_CFG80211_INTERNAL_REGDB @@ -348,9 +347,8 @@ static DEFINE_MUTEX(reg_regdb_search_mutex); static void reg_regdb_search(struct work_struct *work) { struct reg_regdb_search_request *request; - const struct ieee80211_regdomain *curdom, *regdom; - int i, r; - bool set_reg = false; + const struct ieee80211_regdomain *curdom, *regdom = NULL; + int i; mutex_lock(&cfg80211_mutex); @@ -365,10 +363,7 @@ static void reg_regdb_search(struct work_struct *work) curdom = reg_regdb[i]; if (!memcmp(request->alpha2, curdom->alpha2, 2)) { - r = reg_copy_regd(®dom, curdom); - if (r) - break; - set_reg = true; + regdom = reg_copy_regd(curdom); break; } } @@ -377,7 +372,7 @@ static void reg_regdb_search(struct work_struct *work) } mutex_unlock(®_regdb_search_mutex); - if (set_reg) + if (!IS_ERR_OR_NULL(regdom)) set_regdom(regdom); mutex_unlock(&cfg80211_mutex); @@ -1509,6 +1504,7 @@ static void reg_set_request_processed(void) static int __regulatory_hint(struct wiphy *wiphy, struct regulatory_request *pending_request) { + const struct ieee80211_regdomain *regd; bool intersect = false; int r = 0; @@ -1519,11 +1515,12 @@ static int __regulatory_hint(struct wiphy *wiphy, if (r == REG_INTERSECT) { if (pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); - if (r) { + regd = reg_copy_regd(cfg80211_regdomain); + if (IS_ERR(regd)) { kfree(pending_request); - return r; + return PTR_ERR(regd); } + wiphy->regd = regd; } intersect = true; } else if (r) { @@ -1535,12 +1532,13 @@ static int __regulatory_hint(struct wiphy *wiphy, if (r == -EALREADY && pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); - if (r) { + regd = reg_copy_regd(cfg80211_regdomain); + if (IS_ERR(regd)) { kfree(pending_request); - return r; + return PTR_ERR(regd); } r = -EALREADY; + wiphy->regd = regd; goto new_request; } kfree(pending_request); @@ -2200,6 +2198,7 @@ static void print_regdomain_info(const struct ieee80211_regdomain *rd) /* Takes ownership of rd only if it doesn't fail */ static int __set_regdom(const struct ieee80211_regdomain *rd) { + const struct ieee80211_regdomain *regd; const struct ieee80211_regdomain *intersected_rd = NULL; struct wiphy *request_wiphy; /* Some basic sanity checks first */ @@ -2257,8 +2256,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } if (!last_request->intersect) { - int r; - if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { reset_regdomains(false); cfg80211_regdomain = rd; @@ -2277,10 +2274,11 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (request_wiphy->regd) return -EALREADY; - r = reg_copy_regd(&request_wiphy->regd, rd); - if (r) - return r; + regd = reg_copy_regd(rd); + if (IS_ERR(regd)) + return PTR_ERR(regd); + request_wiphy->regd = regd; reset_regdomains(false); cfg80211_regdomain = rd; return 0; -- cgit v0.10.2 From fea9bcedce2d0c751d4f31155f4634689d46166e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:32:01 +0100 Subject: regulatory: don't test list before iterating There's no need to test whether a list is empty or not before iterating. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 52a3598..1496a10 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1104,9 +1104,6 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) assert_cfg80211_lock(); - if (list_empty(®_beacon_list)) - return; - list_for_each_entry(reg_beacon, ®_beacon_list, list) { if (!wiphy->bands[reg_beacon->chan.band]) continue; @@ -1666,11 +1663,6 @@ static void reg_process_pending_beacon_hints(void) /* This goes through the _pending_ beacon list */ spin_lock_bh(®_pending_beacons_lock); - if (list_empty(®_pending_beacons)) { - spin_unlock_bh(®_pending_beacons_lock); - goto out; - } - list_for_each_entry_safe(pending_beacon, tmp, ®_pending_beacons, list) { @@ -1685,7 +1677,6 @@ static void reg_process_pending_beacon_hints(void) } spin_unlock_bh(®_pending_beacons_lock); -out: mutex_unlock(&cfg80211_mutex); } @@ -1949,34 +1940,24 @@ static void restore_regulatory_settings(bool reset_user) * settings. */ spin_lock(®_requests_lock); - if (!list_empty(®_requests_list)) { - list_for_each_entry_safe(reg_request, tmp, - ®_requests_list, list) { - if (reg_request->initiator != - NL80211_REGDOM_SET_BY_USER) - continue; - list_move_tail(®_request->list, &tmp_reg_req_list); - } + list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { + if (reg_request->initiator != NL80211_REGDOM_SET_BY_USER) + continue; + list_move_tail(®_request->list, &tmp_reg_req_list); } spin_unlock(®_requests_lock); /* Clear beacon hints */ spin_lock_bh(®_pending_beacons_lock); - if (!list_empty(®_pending_beacons)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_pending_beacons, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } spin_unlock_bh(®_pending_beacons_lock); - if (!list_empty(®_beacon_list)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_beacon_list, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } /* First restore to the basic regulatory settings */ @@ -2490,30 +2471,21 @@ void /* __init_or_exit */ regulatory_exit(void) platform_device_unregister(reg_pdev); spin_lock_bh(®_pending_beacons_lock); - if (!list_empty(®_pending_beacons)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_pending_beacons, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } spin_unlock_bh(®_pending_beacons_lock); - if (!list_empty(®_beacon_list)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_beacon_list, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } spin_lock(®_requests_lock); - if (!list_empty(®_requests_list)) { - list_for_each_entry_safe(reg_request, tmp, - ®_requests_list, list) { - list_del(®_request->list); - kfree(reg_request); - } + list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { + list_del(®_request->list); + kfree(reg_request); } spin_unlock(®_requests_lock); -- cgit v0.10.2 From 75e2dba866706ab9b133983b7fd9a6297b24c22d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:21:26 +0100 Subject: regulatory: simplify regulatory_hint_11d There's no need to unlock before calling queue_regulatory_request(), so simplify the function. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 1496a10..cd99d28 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1825,12 +1825,7 @@ void regulatory_hint_11d(struct wiphy *wiphy, request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE; request->country_ie_env = env; - mutex_unlock(®_mutex); - queue_regulatory_request(request); - - return; - out: mutex_unlock(®_mutex); } -- cgit v0.10.2 From 1a9193185f462a51815fe48491f8a6fb6b942551 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:21:11 +0100 Subject: regulatory: code cleanup Clean up various things like indentation, extra parentheses, too many/few line breaks, etc. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f45706a..a19583c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4259,7 +4259,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) dfs_region = nla_get_u8(info->attrs[NL80211_ATTR_DFS_REGION]); nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], - rem_reg_rules) { + rem_reg_rules) { num_rules++; if (num_rules > NL80211_MAX_SUPP_REG_RULES) return -EINVAL; @@ -4273,7 +4273,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) } size_of_regd = sizeof(struct ieee80211_regdomain) + - (num_rules * sizeof(struct ieee80211_reg_rule)); + num_rules * sizeof(struct ieee80211_reg_rule); rd = kzalloc(size_of_regd, GFP_KERNEL); if (!rd) { @@ -4293,10 +4293,10 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) rd->dfs_region = dfs_region; nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], - rem_reg_rules) { + rem_reg_rules) { nla_parse(tb, NL80211_REG_RULE_ATTR_MAX, - nla_data(nl_reg_rule), nla_len(nl_reg_rule), - reg_rule_policy); + nla_data(nl_reg_rule), nla_len(nl_reg_rule), + reg_rule_policy); r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]); if (r) goto bad_reg; @@ -4312,10 +4312,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) BUG_ON(rule_idx != num_rules); r = set_regdom(rd); - - mutex_unlock(&cfg80211_mutex); - - return r; + rd = NULL; bad_reg: mutex_unlock(&cfg80211_mutex); diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cd99d28..cf2fb34 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -48,7 +48,6 @@ #include #include #include -#include #include #include #include @@ -219,18 +218,14 @@ bool is_world_regdom(const char *alpha2) { if (!alpha2) return false; - if (alpha2[0] == '0' && alpha2[1] == '0') - return true; - return false; + return alpha2[0] == '0' && alpha2[1] == '0'; } static bool is_alpha2_set(const char *alpha2) { if (!alpha2) return false; - if (alpha2[0] != 0 && alpha2[1] != 0) - return true; - return false; + return alpha2[0] && alpha2[1]; } static bool is_unknown_alpha2(const char *alpha2) @@ -241,9 +236,7 @@ static bool is_unknown_alpha2(const char *alpha2) * Special case where regulatory domain was built by driver * but a specific alpha2 cannot be determined */ - if (alpha2[0] == '9' && alpha2[1] == '9') - return true; - return false; + return alpha2[0] == '9' && alpha2[1] == '9'; } static bool is_intersected_alpha2(const char *alpha2) @@ -255,28 +248,21 @@ static bool is_intersected_alpha2(const char *alpha2) * result of an intersection between two regulatory domain * structures */ - if (alpha2[0] == '9' && alpha2[1] == '8') - return true; - return false; + return alpha2[0] == '9' && alpha2[1] == '8'; } static bool is_an_alpha2(const char *alpha2) { if (!alpha2) return false; - if (isalpha(alpha2[0]) && isalpha(alpha2[1])) - return true; - return false; + return isalpha(alpha2[0]) && isalpha(alpha2[1]); } static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) { if (!alpha2_x || !alpha2_y) return false; - if (alpha2_x[0] == alpha2_y[0] && - alpha2_x[1] == alpha2_y[1]) - return true; - return false; + return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1]; } static bool regdom_changes(const char *alpha2) @@ -285,9 +271,7 @@ static bool regdom_changes(const char *alpha2) if (!cfg80211_regdomain) return true; - if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) - return false; - return true; + return !alpha2_equal(cfg80211_regdomain->alpha2, alpha2); } /* @@ -301,11 +285,9 @@ static bool is_user_regdom_saved(void) return false; /* This would indicate a mistake on the design */ - if (WARN((!is_world_regdom(user_alpha2) && - !is_an_alpha2(user_alpha2)), + if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2), "Unexpected user alpha2: %c%c\n", - user_alpha2[0], - user_alpha2[1])) + user_alpha2[0], user_alpha2[1])) return false; return true; @@ -359,10 +341,10 @@ static void reg_regdb_search(struct work_struct *work) list); list_del(&request->list); - for (i=0; ialpha2, curdom->alpha2, 2)) { + if (alpha2_equal(request->alpha2, curdom->alpha2)) { regdom = reg_copy_regd(curdom); break; } @@ -456,7 +438,7 @@ static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; if (freq_range->end_freq_khz <= freq_range->start_freq_khz || - freq_range->max_bandwidth_khz > freq_diff) + freq_range->max_bandwidth_khz > freq_diff) return false; return true; @@ -514,7 +496,7 @@ static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, * regulatory rule support for other "bands". **/ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, - u32 freq_khz) + u32 freq_khz) { #define ONE_GHZ_IN_KHZ 1000000 /* @@ -536,10 +518,9 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, * Helper for regdom_intersect(), this does the real * mathematical intersection fun */ -static int reg_rules_intersect( - const struct ieee80211_reg_rule *rule1, - const struct ieee80211_reg_rule *rule2, - struct ieee80211_reg_rule *intersected_rule) +static int reg_rules_intersect(const struct ieee80211_reg_rule *rule1, + const struct ieee80211_reg_rule *rule2, + struct ieee80211_reg_rule *intersected_rule) { const struct ieee80211_freq_range *freq_range1, *freq_range2; struct ieee80211_freq_range *freq_range; @@ -556,11 +537,11 @@ static int reg_rules_intersect( power_rule = &intersected_rule->power_rule; freq_range->start_freq_khz = max(freq_range1->start_freq_khz, - freq_range2->start_freq_khz); + freq_range2->start_freq_khz); freq_range->end_freq_khz = min(freq_range1->end_freq_khz, - freq_range2->end_freq_khz); + freq_range2->end_freq_khz); freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz, - freq_range2->max_bandwidth_khz); + freq_range2->max_bandwidth_khz); freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; if (freq_range->max_bandwidth_khz > freq_diff) @@ -571,7 +552,7 @@ static int reg_rules_intersect( power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, power_rule2->max_antenna_gain); - intersected_rule->flags = (rule1->flags | rule2->flags); + intersected_rule->flags = rule1->flags | rule2->flags; if (!is_valid_reg_rule(intersected_rule)) return -EINVAL; @@ -592,9 +573,9 @@ static int reg_rules_intersect( * resulting intersection of rules between rd1 and rd2. We will * kzalloc() this structure for you. */ -static struct ieee80211_regdomain *regdom_intersect( - const struct ieee80211_regdomain *rd1, - const struct ieee80211_regdomain *rd2) +static struct ieee80211_regdomain * +regdom_intersect(const struct ieee80211_regdomain *rd1, + const struct ieee80211_regdomain *rd2) { int r, size_of_regd; unsigned int x, y; @@ -645,8 +626,7 @@ static struct ieee80211_regdomain *regdom_intersect( * a memcpy() */ intersected_rule = &rd->reg_rules[rule_idx]; - r = reg_rules_intersect(rule1, rule2, - intersected_rule); + r = reg_rules_intersect(rule1, rule2, intersected_rule); /* * No need to memset here the intersected rule here as * we're not using the stack anymore @@ -731,9 +711,7 @@ static int freq_reg_info_regd(struct wiphy *wiphy, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, - center_freq, - desired_bw_khz); + bw_fits = reg_does_bw_fit(fr, center_freq, desired_bw_khz); if (band_rule_found && bw_fits) { *reg_rule = rr; @@ -747,17 +725,13 @@ static int freq_reg_info_regd(struct wiphy *wiphy, return -EINVAL; } -int freq_reg_info(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule) { assert_cfg80211_lock(); - return freq_reg_info_regd(wiphy, - center_freq, - desired_bw_khz, - reg_rule, - NULL); + + return freq_reg_info_regd(wiphy, center_freq, desired_bw_khz, + reg_rule, NULL); } EXPORT_SYMBOL(freq_reg_info); @@ -795,16 +769,12 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, else snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain); - REG_DBG_PRINT("Updating information on frequency %d MHz " - "for a %d MHz width channel with regulatory rule:\n", - chan->center_freq, - KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Updating information on frequency %d MHz for a %d MHz width channel with regulatory rule:\n", + chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); REG_DBG_PRINT("%d KHz - %d KHz @ %d KHz), (%s mBi, %d mBm)\n", - freq_range->start_freq_khz, - freq_range->end_freq_khz, - freq_range->max_bandwidth_khz, - max_antenna_gain, + freq_range->start_freq_khz, freq_range->end_freq_khz, + freq_range->max_bandwidth_khz, max_antenna_gain, power_rule->max_eirp); } #else @@ -850,11 +820,8 @@ static void handle_channel(struct wiphy *wiphy, flags = chan->orig_flags; - r = freq_reg_info(wiphy, - MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, - ®_rule); - + r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), + desired_bw_khz, ®_rule); if (r) { /* * We will disable all channels that do not match our @@ -902,8 +869,9 @@ static void handle_channel(struct wiphy *wiphy, chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); - chan->max_antenna_gain = min(chan->orig_mag, - (int) MBI_TO_DBI(power_rule->max_antenna_gain)); + chan->max_antenna_gain = + min_t(int, chan->orig_mag, + MBI_TO_DBI(power_rule->max_antenna_gain)); chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp); if (chan->orig_mpwr) { /* @@ -922,8 +890,7 @@ static void handle_channel(struct wiphy *wiphy, chan->max_power = chan->max_reg_power; } -static void handle_band(struct wiphy *wiphy, - enum ieee80211_band band, +static void handle_band(struct wiphy *wiphy, enum ieee80211_band band, enum nl80211_reg_initiator initiator) { unsigned int i; @@ -940,51 +907,48 @@ static bool reg_request_cell_base(struct regulatory_request *request) { if (request->initiator != NL80211_REGDOM_SET_BY_USER) return false; - if (request->user_reg_hint_type != NL80211_USER_REG_HINT_CELL_BASE) - return false; - return true; + return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE; } bool reg_last_request_cell_base(void) { bool val; + assert_cfg80211_lock(); mutex_lock(®_mutex); val = reg_request_cell_base(last_request); mutex_unlock(®_mutex); + return val; } #ifdef CONFIG_CFG80211_CERTIFICATION_ONUS - /* Core specific check */ static int reg_ignore_cell_hint(struct regulatory_request *pending_request) { if (!reg_num_devs_support_basehint) return -EOPNOTSUPP; - if (reg_request_cell_base(last_request)) { - if (!regdom_changes(pending_request->alpha2)) - return -EALREADY; - return 0; - } + if (reg_request_cell_base(last_request) && + !regdom_changes(pending_request->alpha2)) + return -EALREADY; + return 0; } /* Device specific check */ static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) { - if (!(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS)) - return true; - return false; + return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS); } #else static int reg_ignore_cell_hint(struct regulatory_request *pending_request) { return -EOPNOTSUPP; } -static int reg_dev_ignore_cell_hint(struct wiphy *wiphy) + +static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) { return true; } @@ -995,17 +959,14 @@ static bool ignore_reg_update(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { if (!last_request) { - REG_DBG_PRINT("Ignoring regulatory request %s since " - "last_request is not set\n", + REG_DBG_PRINT("Ignoring regulatory request %s since last_request is not set\n", reg_initiator_name(initiator)); return true; } if (initiator == NL80211_REGDOM_SET_BY_CORE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) { - REG_DBG_PRINT("Ignoring regulatory request %s " - "since the driver uses its own custom " - "regulatory domain\n", + REG_DBG_PRINT("Ignoring regulatory request %s since the driver uses its own custom regulatory domain\n", reg_initiator_name(initiator)); return true; } @@ -1017,9 +978,7 @@ static bool ignore_reg_update(struct wiphy *wiphy, if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY && !wiphy->regd && initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && !is_world_regdom(last_request->alpha2)) { - REG_DBG_PRINT("Ignoring regulatory request %s " - "since the driver requires its own regulatory " - "domain to be set first\n", + REG_DBG_PRINT("Ignoring regulatory request %s since the driver requires its own regulatory domain to be set first\n", reg_initiator_name(initiator)); return true; } @@ -1030,8 +989,7 @@ static bool ignore_reg_update(struct wiphy *wiphy, return false; } -static void handle_reg_beacon(struct wiphy *wiphy, - unsigned int chan_idx, +static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, struct reg_beacon *reg_beacon) { struct ieee80211_supported_band *sband; @@ -1139,16 +1097,14 @@ static void reg_process_beacons(struct wiphy *wiphy) wiphy_update_beacon_reg(wiphy); } -static bool is_ht40_not_allowed(struct ieee80211_channel *chan) +static bool is_ht40_allowed(struct ieee80211_channel *chan) { if (!chan) - return true; + return false; if (chan->flags & IEEE80211_CHAN_DISABLED) - return true; + return false; /* This would happen when regulatory rules disallow HT40 completely */ - if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40))) - return true; - return false; + return !(chan->flags & IEEE80211_CHAN_NO_HT40); } static void reg_process_ht_flags_channel(struct wiphy *wiphy, @@ -1166,7 +1122,7 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, BUG_ON(chan_idx >= sband->n_channels); channel = &sband->channels[chan_idx]; - if (is_ht40_not_allowed(channel)) { + if (!is_ht40_allowed(channel)) { channel->flags |= IEEE80211_CHAN_NO_HT40; return; } @@ -1177,6 +1133,7 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, */ for (i = 0; i < sband->n_channels; i++) { struct ieee80211_channel *c = &sband->channels[i]; + if (c->center_freq == (channel->center_freq - 20)) channel_before = c; if (c->center_freq == (channel->center_freq + 20)) @@ -1188,12 +1145,12 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, * if that ever changes we also need to change the below logic * to include that as well. */ - if (is_ht40_not_allowed(channel_before)) + if (!is_ht40_allowed(channel_before)) channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; else channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; - if (is_ht40_not_allowed(channel_after)) + if (!is_ht40_allowed(channel_after)) channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; else channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; @@ -1245,6 +1202,7 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, reg_process_beacons(wiphy); reg_process_ht_flags(wiphy); + if (wiphy->reg_notifier) wiphy->reg_notifier(wiphy, last_request); } @@ -1289,18 +1247,12 @@ static void handle_channel_custom(struct wiphy *wiphy, BUG_ON(chan_idx >= sband->n_channels); chan = &sband->channels[chan_idx]; - r = freq_reg_info_regd(wiphy, - MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, - ®_rule, - regd); + r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), + desired_bw_khz, ®_rule, regd); if (r) { - REG_DBG_PRINT("Disabling freq %d MHz as custom " - "regd has no rule that fits a %d MHz " - "wide channel\n", - chan->center_freq, - KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits a %d MHz wide channel\n", + chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); chan->flags = IEEE80211_CHAN_DISABLED; return; } @@ -1350,7 +1302,7 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, /* * no point in calling this if it won't have any effect - * on your device's supportd bands. + * on your device's supported bands. */ WARN_ON(!bands_set); } @@ -1379,7 +1331,6 @@ static int ignore_request(struct wiphy *wiphy, case NL80211_REGDOM_SET_BY_CORE: return 0; case NL80211_REGDOM_SET_BY_COUNTRY_IE: - if (reg_request_cell_base(last_request)) { /* Trust a Cell base station over the AP's country IE */ if (regdom_changes(pending_request->alpha2)) @@ -1444,18 +1395,17 @@ static int ignore_request(struct wiphy *wiphy, * to their country before the IE is picked up */ if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && - last_request->intersect) + last_request->intersect) return -EOPNOTSUPP; /* * Process user requests only after previous user/driver/core * requests have been processed */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE || - last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || - last_request->initiator == NL80211_REGDOM_SET_BY_USER) { - if (regdom_changes(last_request->alpha2)) - return -EAGAIN; - } + if ((last_request->initiator == NL80211_REGDOM_SET_BY_CORE || + last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || + last_request->initiator == NL80211_REGDOM_SET_BY_USER) && + regdom_changes(last_request->alpha2)) + return -EAGAIN; if (!regdom_changes(pending_request->alpha2)) return -EALREADY; @@ -1585,8 +1535,7 @@ static void reg_process_hint(struct regulatory_request *reg_request, if (wiphy_idx_valid(reg_request->wiphy_idx)) wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); - if (reg_initiator == NL80211_REGDOM_SET_BY_DRIVER && - !wiphy) { + if (reg_initiator == NL80211_REGDOM_SET_BY_DRIVER && !wiphy) { kfree(reg_request); return; } @@ -1603,8 +1552,7 @@ static void reg_process_hint(struct regulatory_request *reg_request, * We only time out user hints, given that they should be the only * source of bogus requests. */ - if (r != -EALREADY && - reg_initiator == NL80211_REGDOM_SET_BY_USER) + if (r != -EALREADY && reg_initiator == NL80211_REGDOM_SET_BY_USER) schedule_delayed_work(®_timeout, msecs_to_jiffies(3142)); } @@ -1622,8 +1570,7 @@ static void reg_process_pending_hints(void) /* When last_request->processed becomes true this will be rescheduled */ if (last_request && !last_request->processed) { - REG_DBG_PRINT("Pending regulatory request, waiting " - "for it to be processed...\n"); + REG_DBG_PRINT("Pending regulatory request, waiting for it to be processed...\n"); goto out; } @@ -1665,7 +1612,6 @@ static void reg_process_pending_beacon_hints(void) list_for_each_entry_safe(pending_beacon, tmp, ®_pending_beacons, list) { - list_del_init(&pending_beacon->list); /* Applies the beacon hint to current wiphys */ @@ -1708,8 +1654,7 @@ static int regulatory_hint_core(const char *alpha2) { struct regulatory_request *request; - request = kzalloc(sizeof(struct regulatory_request), - GFP_KERNEL); + request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) return -ENOMEM; @@ -1776,10 +1721,8 @@ EXPORT_SYMBOL(regulatory_hint); * We hold wdev_lock() here so we cannot hold cfg80211_mutex() and * therefore cannot iterate over the rdev list here. */ -void regulatory_hint_11d(struct wiphy *wiphy, - enum ieee80211_band band, - const u8 *country_ie, - u8 country_ie_len) +void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, + const u8 *country_ie, u8 country_ie_len) { char alpha2[2]; enum environment_cap env = ENVIRON_ANY; @@ -1811,8 +1754,8 @@ void regulatory_hint_11d(struct wiphy *wiphy, * cfg80211_mutex. */ if (likely(last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE && - wiphy_idx_valid(last_request->wiphy_idx))) + NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy_idx_valid(last_request->wiphy_idx))) goto out; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -1840,8 +1783,7 @@ static void restore_alpha2(char *alpha2, bool reset_user) if (is_user_regdom_saved()) { /* Unless we're asked to ignore it and reset it */ if (reset_user) { - REG_DBG_PRINT("Restoring regulatory settings " - "including user preference\n"); + REG_DBG_PRINT("Restoring regulatory settings including user preference\n"); user_alpha2[0] = '9'; user_alpha2[1] = '7'; @@ -1851,26 +1793,20 @@ static void restore_alpha2(char *alpha2, bool reset_user) * back as they were for a full restore. */ if (!is_world_regdom(ieee80211_regdom)) { - REG_DBG_PRINT("Keeping preference on " - "module parameter ieee80211_regdom: %c%c\n", - ieee80211_regdom[0], - ieee80211_regdom[1]); + REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], ieee80211_regdom[1]); alpha2[0] = ieee80211_regdom[0]; alpha2[1] = ieee80211_regdom[1]; } } else { - REG_DBG_PRINT("Restoring regulatory settings " - "while preserving user preference for: %c%c\n", - user_alpha2[0], - user_alpha2[1]); + REG_DBG_PRINT("Restoring regulatory settings while preserving user preference for: %c%c\n", + user_alpha2[0], user_alpha2[1]); alpha2[0] = user_alpha2[0]; alpha2[1] = user_alpha2[1]; } } else if (!is_world_regdom(ieee80211_regdom)) { - REG_DBG_PRINT("Keeping preference on " - "module parameter ieee80211_regdom: %c%c\n", - ieee80211_regdom[0], - ieee80211_regdom[1]); + REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], ieee80211_regdom[1]); alpha2[0] = ieee80211_regdom[0]; alpha2[1] = ieee80211_regdom[1]; } else @@ -1986,10 +1922,8 @@ static void restore_regulatory_settings(bool reset_user) spin_lock(®_requests_lock); list_for_each_entry_safe(reg_request, tmp, &tmp_reg_req_list, list) { - REG_DBG_PRINT("Adding request for country %c%c back " - "into the queue\n", - reg_request->alpha2[0], - reg_request->alpha2[1]); + REG_DBG_PRINT("Adding request for country %c%c back into the queue\n", + reg_request->alpha2[0], reg_request->alpha2[1]); list_move_tail(®_request->list, ®_requests_list); } spin_unlock(®_requests_lock); @@ -2004,8 +1938,7 @@ static void restore_regulatory_settings(bool reset_user) void regulatory_hint_disconnect(void) { - REG_DBG_PRINT("All devices are disconnected, going to " - "restore regulatory settings\n"); + REG_DBG_PRINT("All devices are disconnected, going to restore regulatory settings\n"); restore_regulatory_settings(false); } @@ -2024,25 +1957,23 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy, { struct reg_beacon *reg_beacon; - if (likely((beacon_chan->beacon_found || - (beacon_chan->flags & IEEE80211_CHAN_RADAR) || + if (beacon_chan->beacon_found || + beacon_chan->flags & IEEE80211_CHAN_RADAR || (beacon_chan->band == IEEE80211_BAND_2GHZ && - !freq_is_chan_12_13_14(beacon_chan->center_freq))))) + !freq_is_chan_12_13_14(beacon_chan->center_freq))) return 0; reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); if (!reg_beacon) return -ENOMEM; - REG_DBG_PRINT("Found new beacon on " - "frequency: %d MHz (Ch %d) on %s\n", + REG_DBG_PRINT("Found new beacon on frequency: %d MHz (Ch %d) on %s\n", beacon_chan->center_freq, ieee80211_frequency_to_channel(beacon_chan->center_freq), wiphy_name(wiphy)); memcpy(®_beacon->chan, beacon_chan, - sizeof(struct ieee80211_channel)); - + sizeof(struct ieee80211_channel)); /* * Since we can be called from BH or and non-BH context @@ -2122,7 +2053,7 @@ static void print_dfs_region(u8 dfs_region) pr_info(" DFS Master region JP"); break; default: - pr_info(" DFS Master region Uknown"); + pr_info(" DFS Master region Unknown"); break; } } @@ -2131,7 +2062,6 @@ static void print_regdomain(const struct ieee80211_regdomain *rd) { if (is_intersected_alpha2(rd->alpha2)) { - if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { struct cfg80211_registered_device *rdev; @@ -2145,22 +2075,21 @@ static void print_regdomain(const struct ieee80211_regdomain *rd) pr_info("Current regulatory domain intersected:\n"); } else pr_info("Current regulatory domain intersected:\n"); - } else if (is_world_regdom(rd->alpha2)) + } else if (is_world_regdom(rd->alpha2)) { pr_info("World regulatory domain updated:\n"); - else { + } else { if (is_unknown_alpha2(rd->alpha2)) pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n"); else { if (reg_request_cell_base(last_request)) - pr_info("Regulatory domain changed " - "to country: %c%c by Cell Station\n", + pr_info("Regulatory domain changed to country: %c%c by Cell Station\n", rd->alpha2[0], rd->alpha2[1]); else - pr_info("Regulatory domain changed " - "to country: %c%c\n", + pr_info("Regulatory domain changed to country: %c%c\n", rd->alpha2[0], rd->alpha2[1]); } } + print_dfs_region(rd->dfs_region); print_rd_rules(rd); } @@ -2187,7 +2116,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && - !is_unknown_alpha2(rd->alpha2)) + !is_unknown_alpha2(rd->alpha2)) return -EINVAL; if (!last_request) @@ -2263,7 +2192,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Intersection requires a bit more work */ if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { - intersected_rd = regdom_intersect(rd, cfg80211_regdomain); if (!intersected_rd) return -EINVAL; @@ -2315,8 +2243,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - if (!last_request->intersect) - BUG_ON(rd != cfg80211_regdomain); + BUG_ON(!last_request->intersect && rd != cfg80211_regdomain); /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); @@ -2393,8 +2320,7 @@ out: static void reg_timeout_work(struct work_struct *work) { - REG_DBG_PRINT("Timeout while waiting for CRDA to reply, " - "restoring regulatory settings\n"); + REG_DBG_PRINT("Timeout while waiting for CRDA to reply, restoring regulatory settings\n"); restore_regulatory_settings(true); } @@ -2448,7 +2374,7 @@ int __init regulatory_init(void) return 0; } -void /* __init_or_exit */ regulatory_exit(void) +void regulatory_exit(void) { struct regulatory_request *reg_request, *tmp; struct reg_beacon *reg_beacon, *btmp; diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 4c0a32f..37891e8 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -55,8 +55,8 @@ bool reg_last_request_cell_base(void); * set the wiphy->disable_beacon_hints to true. */ int regulatory_hint_found_beacon(struct wiphy *wiphy, - struct ieee80211_channel *beacon_chan, - gfp_t gfp); + struct ieee80211_channel *beacon_chan, + gfp_t gfp); /** * regulatory_hint_11d - hints a country IE as a regulatory domain diff --git a/net/wireless/sme.c b/net/wireless/sme.c index f2431e4..d2d2651 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -519,10 +519,8 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, * - country_ie + 2, the start of the country ie data, and * - and country_ie[1] which is the IE length */ - regulatory_hint_11d(wdev->wiphy, - bss->channel->band, - country_ie + 2, - country_ie[1]); + regulatory_hint_11d(wdev->wiphy, bss->channel->band, + country_ie + 2, country_ie[1]); kfree(country_ie); } -- cgit v0.10.2 From 9027b1493b57a6a8f9f56741e4c4189048ea5633 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:59:24 +0100 Subject: regulatory: remove useless locking on exit It would be a major problem if anything were to run concurrently while the module is being unloaded so remove the locking that doesn't help anything. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cf2fb34..cf4386f 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2382,34 +2382,29 @@ void regulatory_exit(void) cancel_work_sync(®_work); cancel_delayed_work_sync(®_timeout); + /* Lock to suppress warnings */ mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true); + mutex_unlock(&cfg80211_mutex); + mutex_unlock(®_mutex); dev_set_uevent_suppress(®_pdev->dev, true); platform_device_unregister(reg_pdev); - spin_lock_bh(®_pending_beacons_lock); list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { list_del(®_beacon->list); kfree(reg_beacon); } - spin_unlock_bh(®_pending_beacons_lock); list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { list_del(®_beacon->list); kfree(reg_beacon); } - spin_lock(®_requests_lock); list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { list_del(®_request->list); kfree(reg_request); } - spin_unlock(®_requests_lock); - - mutex_unlock(®_mutex); - mutex_unlock(&cfg80211_mutex); } -- cgit v0.10.2 From 2f92212b71f198d42060f7133ff1dc4edf438f6c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:54:55 +0100 Subject: regulatory: use proper enum for return values Instead of treating special error codes specially, like -EALREADY, introduce a real enum for all the needed possibilities and use it. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cf4386f..1295869 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -65,6 +65,13 @@ #define REG_DBG_PRINT(args...) #endif +enum reg_request_treatment { + REG_REQ_OK, + REG_REQ_IGNORE, + REG_REQ_INTERSECT, + REG_REQ_ALREADY_SET, +}; + static struct regulatory_request core_request_world = { .initiator = NL80211_REGDOM_SET_BY_CORE, .alpha2[0] = '0', @@ -925,16 +932,17 @@ bool reg_last_request_cell_base(void) #ifdef CONFIG_CFG80211_CERTIFICATION_ONUS /* Core specific check */ -static int reg_ignore_cell_hint(struct regulatory_request *pending_request) +static enum reg_request_treatment +reg_ignore_cell_hint(struct regulatory_request *pending_request) { if (!reg_num_devs_support_basehint) - return -EOPNOTSUPP; + return REG_REQ_IGNORE; if (reg_request_cell_base(last_request) && !regdom_changes(pending_request->alpha2)) - return -EALREADY; + return REG_REQ_ALREADY_SET; - return 0; + return REG_REQ_OK; } /* Device specific check */ @@ -945,7 +953,7 @@ static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) #else static int reg_ignore_cell_hint(struct regulatory_request *pending_request) { - return -EOPNOTSUPP; + return REG_REQ_IGNORE; } static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) @@ -1308,15 +1316,10 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, } EXPORT_SYMBOL(wiphy_apply_custom_regulatory); -/* - * Return value which can be used by ignore_request() to indicate - * it has been determined we should intersect two regulatory domains - */ -#define REG_INTERSECT 1 - /* This has the logic which determines when a new request * should be ignored. */ -static int ignore_request(struct wiphy *wiphy, +static enum reg_request_treatment +get_reg_request_treatment(struct wiphy *wiphy, struct regulatory_request *pending_request) { struct wiphy *last_wiphy = NULL; @@ -1325,17 +1328,17 @@ static int ignore_request(struct wiphy *wiphy, /* All initial requests are respected */ if (!last_request) - return 0; + return REG_REQ_OK; switch (pending_request->initiator) { case NL80211_REGDOM_SET_BY_CORE: - return 0; + return REG_REQ_OK; case NL80211_REGDOM_SET_BY_COUNTRY_IE: if (reg_request_cell_base(last_request)) { /* Trust a Cell base station over the AP's country IE */ if (regdom_changes(pending_request->alpha2)) - return -EOPNOTSUPP; - return -EALREADY; + return REG_REQ_IGNORE; + return REG_REQ_ALREADY_SET; } last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); @@ -1352,23 +1355,23 @@ static int ignore_request(struct wiphy *wiphy, * to be correct. Reject second one for now. */ if (regdom_changes(pending_request->alpha2)) - return -EOPNOTSUPP; - return -EALREADY; + return REG_REQ_IGNORE; + return REG_REQ_ALREADY_SET; } /* * Two consecutive Country IE hints on the same wiphy. * This should be picked up early by the driver/stack */ if (WARN_ON(regdom_changes(pending_request->alpha2))) - return 0; - return -EALREADY; + return REG_REQ_OK; + return REG_REQ_ALREADY_SET; } return 0; case NL80211_REGDOM_SET_BY_DRIVER: if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) { if (regdom_changes(pending_request->alpha2)) - return 0; - return -EALREADY; + return REG_REQ_OK; + return REG_REQ_ALREADY_SET; } /* @@ -1378,25 +1381,25 @@ static int ignore_request(struct wiphy *wiphy, */ if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && !regdom_changes(pending_request->alpha2)) - return -EALREADY; + return REG_REQ_ALREADY_SET; - return REG_INTERSECT; + return REG_REQ_INTERSECT; case NL80211_REGDOM_SET_BY_USER: if (reg_request_cell_base(pending_request)) return reg_ignore_cell_hint(pending_request); if (reg_request_cell_base(last_request)) - return -EOPNOTSUPP; + return REG_REQ_IGNORE; if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) - return REG_INTERSECT; + return REG_REQ_INTERSECT; /* * If the user knows better the user should set the regdom * to their country before the IE is picked up */ if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && last_request->intersect) - return -EOPNOTSUPP; + return REG_REQ_IGNORE; /* * Process user requests only after previous user/driver/core * requests have been processed @@ -1405,15 +1408,15 @@ static int ignore_request(struct wiphy *wiphy, last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || last_request->initiator == NL80211_REGDOM_SET_BY_USER) && regdom_changes(last_request->alpha2)) - return -EAGAIN; + return REG_REQ_IGNORE; if (!regdom_changes(pending_request->alpha2)) - return -EALREADY; + return REG_REQ_ALREADY_SET; - return 0; + return REG_REQ_OK; } - return -EINVAL; + return REG_REQ_IGNORE; } static void reg_set_request_processed(void) @@ -1443,23 +1446,24 @@ static void reg_set_request_processed(void) * The Wireless subsystem can use this function to hint to the wireless core * what it believes should be the current regulatory domain. * - * Returns zero if all went fine, %-EALREADY if a regulatory domain had - * already been set or other standard error codes. + * Returns one of the different reg request treatment values. * * Caller must hold &cfg80211_mutex and ®_mutex */ -static int __regulatory_hint(struct wiphy *wiphy, - struct regulatory_request *pending_request) +static enum reg_request_treatment +__regulatory_hint(struct wiphy *wiphy, + struct regulatory_request *pending_request) { const struct ieee80211_regdomain *regd; bool intersect = false; - int r = 0; + enum reg_request_treatment treatment; assert_cfg80211_lock(); - r = ignore_request(wiphy, pending_request); + treatment = get_reg_request_treatment(wiphy, pending_request); - if (r == REG_INTERSECT) { + switch (treatment) { + case REG_REQ_INTERSECT: if (pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { regd = reg_copy_regd(cfg80211_regdomain); @@ -1470,26 +1474,28 @@ static int __regulatory_hint(struct wiphy *wiphy, wiphy->regd = regd; } intersect = true; - } else if (r) { + break; + case REG_REQ_OK: + break; + default: /* * If the regulatory domain being requested by the * driver has already been set just copy it to the * wiphy */ - if (r == -EALREADY && - pending_request->initiator == - NL80211_REGDOM_SET_BY_DRIVER) { + if (treatment == REG_REQ_ALREADY_SET && + pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { regd = reg_copy_regd(cfg80211_regdomain); if (IS_ERR(regd)) { kfree(pending_request); - return PTR_ERR(regd); + return REG_REQ_IGNORE; } - r = -EALREADY; + treatment = REG_REQ_ALREADY_SET; wiphy->regd = regd; goto new_request; } kfree(pending_request); - return r; + return treatment; } new_request: @@ -1506,28 +1512,29 @@ new_request: user_alpha2[1] = last_request->alpha2[1]; } - /* When r == REG_INTERSECT we do need to call CRDA */ - if (r < 0) { + /* When r == REG_REQ_INTERSECT we do need to call CRDA */ + if (treatment != REG_REQ_OK && treatment != REG_REQ_INTERSECT) { /* * Since CRDA will not be called in this case as we already * have applied the requested regulatory domain before we just * inform userspace we have processed the request */ - if (r == -EALREADY) { + if (treatment == REG_REQ_ALREADY_SET) { nl80211_send_reg_change_event(last_request); reg_set_request_processed(); } - return r; + return treatment; } - return call_crda(last_request->alpha2); + if (call_crda(last_request->alpha2)) + return REG_REQ_IGNORE; + return REG_REQ_OK; } /* This processes *all* regulatory hints */ static void reg_process_hint(struct regulatory_request *reg_request, enum nl80211_reg_initiator reg_initiator) { - int r = 0; struct wiphy *wiphy = NULL; BUG_ON(!reg_request->alpha2); @@ -1540,20 +1547,18 @@ static void reg_process_hint(struct regulatory_request *reg_request, return; } - r = __regulatory_hint(wiphy, reg_request); - /* This is required so that the orig_* parameters are saved */ - if (r == -EALREADY && wiphy && - wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) { - wiphy_update_regulatory(wiphy, reg_initiator); - return; + switch (__regulatory_hint(wiphy, reg_request)) { + case REG_REQ_ALREADY_SET: + /* This is required so that the orig_* parameters are saved */ + if (wiphy && wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) + wiphy_update_regulatory(wiphy, reg_initiator); + break; + default: + if (reg_initiator == NL80211_REGDOM_SET_BY_USER) + schedule_delayed_work(®_timeout, + msecs_to_jiffies(3142)); + break; } - - /* - * We only time out user hints, given that they should be the only - * source of bogus requests. - */ - if (r != -EALREADY && reg_initiator == NL80211_REGDOM_SET_BY_USER) - schedule_delayed_work(®_timeout, msecs_to_jiffies(3142)); } /* -- cgit v0.10.2 From f41737669d2f4c07c09e90767498243e142171f9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:23:37 +0100 Subject: cfg80211: remove wiphy_idx_valid This is pretty much useless since get_wiphy_idx() always returns true since it's always called with a valid wiphy pointer. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 14d9904..747dd93 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -57,9 +57,6 @@ struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx) { struct cfg80211_registered_device *result = NULL, *rdev; - if (!wiphy_idx_valid(wiphy_idx)) - return NULL; - assert_cfg80211_lock(); list_for_each_entry(rdev, &cfg80211_rdev_list, list) { @@ -74,10 +71,8 @@ struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx) int get_wiphy_idx(struct wiphy *wiphy) { - struct cfg80211_registered_device *rdev; - if (!wiphy) - return WIPHY_IDX_STALE; - rdev = wiphy_to_dev(wiphy); + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + return rdev->wiphy_idx; } @@ -86,9 +81,6 @@ struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx) { struct cfg80211_registered_device *rdev; - if (!wiphy_idx_valid(wiphy_idx)) - return NULL; - assert_cfg80211_lock(); rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx); @@ -309,7 +301,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) rdev->wiphy_idx = wiphy_counter++; - if (unlikely(!wiphy_idx_valid(rdev->wiphy_idx))) { + if (unlikely(rdev->wiphy_idx < 0)) { wiphy_counter--; mutex_unlock(&cfg80211_mutex); /* ugh, wrapped! */ diff --git a/net/wireless/core.h b/net/wireless/core.h index 3563097..b8f4630 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -18,6 +18,9 @@ #include #include "reg.h" + +#define WIPHY_IDX_INVALID -1 + struct cfg80211_registered_device { const struct cfg80211_ops *ops; struct list_head list; @@ -96,13 +99,6 @@ struct cfg80211_registered_device *wiphy_to_dev(struct wiphy *wiphy) return container_of(wiphy, struct cfg80211_registered_device, wiphy); } -/* Note 0 is valid, hence phy0 */ -static inline -bool wiphy_idx_valid(int wiphy_idx) -{ - return wiphy_idx >= 0; -} - static inline void cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev) { @@ -126,12 +122,6 @@ static inline void assert_cfg80211_lock(void) lockdep_assert_held(&cfg80211_mutex); } -/* - * You can use this to mark a wiphy_idx as not having an associated wiphy. - * It guarantees cfg80211_rdev_by_wiphy_idx(wiphy_idx) will return NULL - */ -#define WIPHY_IDX_STALE -1 - struct cfg80211_internal_bss { struct list_head list; struct rb_node rbn; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index a19583c..5fbc8cd 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -8048,7 +8048,7 @@ void nl80211_send_reg_change_event(struct regulatory_request *request) goto nla_put_failure; } - if (wiphy_idx_valid(request->wiphy_idx) && + if (request->wiphy_idx != WIPHY_IDX_INVALID && nla_put_u32(msg, NL80211_ATTR_WIPHY, request->wiphy_idx)) goto nla_put_failure; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 1295869..b825c82 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1539,7 +1539,7 @@ static void reg_process_hint(struct regulatory_request *reg_request, BUG_ON(!reg_request->alpha2); - if (wiphy_idx_valid(reg_request->wiphy_idx)) + if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); if (reg_initiator == NL80211_REGDOM_SET_BY_DRIVER && !wiphy) { @@ -1684,7 +1684,7 @@ int regulatory_hint_user(const char *alpha2, if (!request) return -ENOMEM; - request->wiphy_idx = WIPHY_IDX_STALE; + request->wiphy_idx = WIPHY_IDX_INVALID; request->alpha2[0] = alpha2[0]; request->alpha2[1] = alpha2[1]; request->initiator = NL80211_REGDOM_SET_BY_USER; @@ -1709,9 +1709,6 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2) request->wiphy_idx = get_wiphy_idx(wiphy); - /* Must have registered wiphy first */ - BUG_ON(!wiphy_idx_valid(request->wiphy_idx)); - request->alpha2[0] = alpha2[0]; request->alpha2[1] = alpha2[1]; request->initiator = NL80211_REGDOM_SET_BY_DRIVER; @@ -1758,9 +1755,8 @@ void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, * We leave conflict resolution to the workqueue, where can hold * cfg80211_mutex. */ - if (likely(last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE && - wiphy_idx_valid(last_request->wiphy_idx))) + if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + last_request->wiphy_idx != WIPHY_IDX_INVALID) goto out; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -2317,7 +2313,7 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) if (!request_wiphy || request_wiphy != wiphy) goto out; - last_request->wiphy_idx = WIPHY_IDX_STALE; + last_request->wiphy_idx = WIPHY_IDX_INVALID; last_request->country_ie_env = ENVIRON_ANY; out: mutex_unlock(®_mutex); -- cgit v0.10.2 From fdc9d7b2863ce67f51ed64f89e5b20f3077be569 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:36:09 +0100 Subject: regulatory: remove BUG_ON This code is a bit too BUG_ON happy, remove all instances and while doing so make some code a bit smarter by passing the right pointer instead of indices into arrays. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 5fbc8cd..9c2c918 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4309,8 +4309,6 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) } } - BUG_ON(rule_idx != num_rules); - r = set_regdom(rd); rd = NULL; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b825c82..57812df 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -213,7 +213,7 @@ static void reset_regdomains(bool full_reset) */ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { - BUG_ON(!last_request); + WARN_ON(!last_request); reset_regdomains(false); @@ -804,8 +804,7 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, - enum ieee80211_band band, - unsigned int chan_idx) + struct ieee80211_channel *chan) { int r; u32 flags, bw_flags = 0; @@ -813,18 +812,12 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *chan; struct wiphy *request_wiphy = NULL; assert_cfg80211_lock(); request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); - sband = wiphy->bands[band]; - BUG_ON(chan_idx >= sband->n_channels); - chan = &sband->channels[chan_idx]; - flags = chan->orig_flags; r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), @@ -897,17 +890,17 @@ static void handle_channel(struct wiphy *wiphy, chan->max_power = chan->max_reg_power; } -static void handle_band(struct wiphy *wiphy, enum ieee80211_band band, - enum nl80211_reg_initiator initiator) +static void handle_band(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator, + struct ieee80211_supported_band *sband) { unsigned int i; - struct ieee80211_supported_band *sband; - BUG_ON(!wiphy->bands[band]); - sband = wiphy->bands[band]; + if (!sband) + return; for (i = 0; i < sband->n_channels; i++) - handle_channel(wiphy, initiator, band, i); + handle_channel(wiphy, initiator, &sband->channels[i]); } static bool reg_request_cell_base(struct regulatory_request *request) @@ -1116,20 +1109,14 @@ static bool is_ht40_allowed(struct ieee80211_channel *chan) } static void reg_process_ht_flags_channel(struct wiphy *wiphy, - enum ieee80211_band band, - unsigned int chan_idx) + struct ieee80211_channel *channel) { - struct ieee80211_supported_band *sband; - struct ieee80211_channel *channel; + struct ieee80211_supported_band *sband = wiphy->bands[channel->band]; struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; unsigned int i; assert_cfg80211_lock(); - sband = wiphy->bands[band]; - BUG_ON(chan_idx >= sband->n_channels); - channel = &sband->channels[chan_idx]; - if (!is_ht40_allowed(channel)) { channel->flags |= IEEE80211_CHAN_NO_HT40; return; @@ -1165,16 +1152,15 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, } static void reg_process_ht_flags_band(struct wiphy *wiphy, - enum ieee80211_band band) + struct ieee80211_supported_band *sband) { unsigned int i; - struct ieee80211_supported_band *sband; - BUG_ON(!wiphy->bands[band]); - sband = wiphy->bands[band]; + if (!sband) + return; for (i = 0; i < sband->n_channels; i++) - reg_process_ht_flags_channel(wiphy, band, i); + reg_process_ht_flags_channel(wiphy, &sband->channels[i]); } static void reg_process_ht_flags(struct wiphy *wiphy) @@ -1184,11 +1170,8 @@ static void reg_process_ht_flags(struct wiphy *wiphy) if (!wiphy) return; - for (band = 0; band < IEEE80211_NUM_BANDS; band++) { - if (wiphy->bands[band]) - reg_process_ht_flags_band(wiphy, band); - } - + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + reg_process_ht_flags_band(wiphy, wiphy->bands[band]); } static void wiphy_update_regulatory(struct wiphy *wiphy, @@ -1203,10 +1186,8 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, last_request->dfs_region = cfg80211_regdomain->dfs_region; - for (band = 0; band < IEEE80211_NUM_BANDS; band++) { - if (wiphy->bands[band]) - handle_band(wiphy, band, initiator); - } + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + handle_band(wiphy, initiator, wiphy->bands[band]); reg_process_beacons(wiphy); reg_process_ht_flags(wiphy); @@ -1236,8 +1217,7 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) } static void handle_channel_custom(struct wiphy *wiphy, - enum ieee80211_band band, - unsigned int chan_idx, + struct ieee80211_channel *chan, const struct ieee80211_regdomain *regd) { int r; @@ -1246,15 +1226,9 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *chan; assert_reg_lock(); - sband = wiphy->bands[band]; - BUG_ON(chan_idx >= sband->n_channels); - chan = &sband->channels[chan_idx]; - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), desired_bw_khz, ®_rule, regd); @@ -1279,17 +1253,17 @@ static void handle_channel_custom(struct wiphy *wiphy, (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band, +static void handle_band_custom(struct wiphy *wiphy, + struct ieee80211_supported_band *sband, const struct ieee80211_regdomain *regd) { unsigned int i; - struct ieee80211_supported_band *sband; - BUG_ON(!wiphy->bands[band]); - sband = wiphy->bands[band]; + if (!sband) + return; for (i = 0; i < sband->n_channels; i++) - handle_channel_custom(wiphy, band, i, regd); + handle_channel_custom(wiphy, &sband->channels[i], regd); } /* Used by drivers prior to wiphy registration */ @@ -1303,7 +1277,7 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (!wiphy->bands[band]) continue; - handle_band_custom(wiphy, band, regd); + handle_band_custom(wiphy, wiphy->bands[band], regd); bands_set++; } mutex_unlock(®_mutex); @@ -1537,7 +1511,8 @@ static void reg_process_hint(struct regulatory_request *reg_request, { struct wiphy *wiphy = NULL; - BUG_ON(!reg_request->alpha2); + if (WARN_ON(!reg_request->alpha2)) + return; if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); @@ -1678,7 +1653,8 @@ int regulatory_hint_user(const char *alpha2, { struct regulatory_request *request; - BUG_ON(!alpha2); + if (WARN_ON(!alpha2)) + return -EINVAL; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) @@ -1700,8 +1676,8 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2) { struct regulatory_request *request; - BUG_ON(!alpha2); - BUG_ON(!wiphy); + if (WARN_ON(!alpha2 || !wiphy)) + return -EINVAL; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) @@ -2239,12 +2215,14 @@ int set_regdom(const struct ieee80211_regdomain *rd) reg_set_request_processed(); kfree(rd); - mutex_unlock(®_mutex); - return r; + goto out; } /* This would make this whole thing pointless */ - BUG_ON(!last_request->intersect && rd != cfg80211_regdomain); + if (WARN_ON(!last_request->intersect && rd != cfg80211_regdomain)) { + r = -EINVAL; + goto out; + } /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); @@ -2255,6 +2233,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) reg_set_request_processed(); + out: mutex_unlock(®_mutex); return r; -- cgit v0.10.2 From 11cff96c0660e1e361d60ab90514ffbbfbaf7c03 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:56:41 +0100 Subject: regulatory: simplify restore_regulatory_settings Use list_splice_tail_init() and also simplify the locking. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 57812df..87daba9 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1878,9 +1878,6 @@ static void restore_regulatory_settings(bool reset_user) restore_custom_reg_settings(&rdev->wiphy); } - mutex_unlock(®_mutex); - mutex_unlock(&cfg80211_mutex); - regulatory_hint_core(world_alpha2); /* @@ -1891,18 +1888,8 @@ static void restore_regulatory_settings(bool reset_user) if (is_an_alpha2(alpha2)) regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER); - if (list_empty(&tmp_reg_req_list)) - return; - - mutex_lock(&cfg80211_mutex); - mutex_lock(®_mutex); - spin_lock(®_requests_lock); - list_for_each_entry_safe(reg_request, tmp, &tmp_reg_req_list, list) { - REG_DBG_PRINT("Adding request for country %c%c back into the queue\n", - reg_request->alpha2[0], reg_request->alpha2[1]); - list_move_tail(®_request->list, ®_requests_list); - } + list_splice_tail_init(&tmp_reg_req_list, ®_requests_list); spin_unlock(®_requests_lock); mutex_unlock(®_mutex); -- cgit v0.10.2 From d4f2c8819a51f31ef0f929574ce8d80b323c6a76 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:59:58 +0100 Subject: regulatory: remove redundant isalpha() check toupper() only modifies lower-case letters, so the isalpha() check is redundant; remove it. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 87daba9..946cd53 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1614,10 +1614,8 @@ static void reg_todo(struct work_struct *work) static void queue_regulatory_request(struct regulatory_request *request) { - if (isalpha(request->alpha2[0])) - request->alpha2[0] = toupper(request->alpha2[0]); - if (isalpha(request->alpha2[1])) - request->alpha2[1] = toupper(request->alpha2[1]); + request->alpha2[0] = toupper(request->alpha2[0]); + request->alpha2[1] = toupper(request->alpha2[1]); spin_lock(®_requests_lock); list_add_tail(&request->list, ®_requests_list); -- cgit v0.10.2 From 0ba857ad671aa8aa2a1276aa7a0c79abd0575146 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 19:12:02 +0100 Subject: regulatory: remove useless warning Even if it never happens and is hidden behind the debug config option, it's completely useless: the calltrace will only show module loading. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 946cd53..b63bdf8 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2322,10 +2322,6 @@ int __init regulatory_init(void) * errors as non-fatal. */ pr_err("kobject_uevent_env() was unable to call CRDA during init\n"); -#ifdef CONFIG_CFG80211_REG_DEBUG - /* We want to find out exactly why when debugging */ - WARN_ON(err); -#endif } /* -- cgit v0.10.2 From 5d885b999c68283c493cf00cc020260d38951ae6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 00:14:17 +0100 Subject: regulatory: simplify freq_reg_info_regd The function itself has dual-purpose: it can retrieve from a given regdomain or from the globally installed one. Change it to have a single purpose only: to look up from a given regdomain. Pass the correct regdomain in the freq_reg_info() function instead. This also changes the locking rules for it, no locking is required any more. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b63bdf8..7523978 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -678,28 +678,15 @@ static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule, - const struct ieee80211_regdomain *custom_regd) + const struct ieee80211_regdomain *regd) { int i; bool band_rule_found = false; - const struct ieee80211_regdomain *regd; bool bw_fits = false; if (!desired_bw_khz) desired_bw_khz = MHZ_TO_KHZ(20); - regd = custom_regd ? custom_regd : cfg80211_regdomain; - - /* - * Follow the driver's regulatory domain, if present, unless a country - * IE has been processed or a user wants to help complaince further - */ - if (!custom_regd && - last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - last_request->initiator != NL80211_REGDOM_SET_BY_USER && - wiphy->regd) - regd = wiphy->regd; - if (!regd) return -EINVAL; @@ -735,10 +722,24 @@ static int freq_reg_info_regd(struct wiphy *wiphy, int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule) { + const struct ieee80211_regdomain *regd; + + assert_reg_lock(); assert_cfg80211_lock(); + /* + * Follow the driver's regulatory domain, if present, unless a country + * IE has been processed or a user wants to help complaince further + */ + if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + last_request->initiator != NL80211_REGDOM_SET_BY_USER && + wiphy->regd) + regd = wiphy->regd; + else + regd = cfg80211_regdomain; + return freq_reg_info_regd(wiphy, center_freq, desired_bw_khz, - reg_rule, NULL); + reg_rule, regd); } EXPORT_SYMBOL(freq_reg_info); -- cgit v0.10.2 From e8da2bb4fe9ecb888f44714e2624c7d4268ac09d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 23:00:08 +0100 Subject: regulatory: clarify locking rules and assertions Many places that currently check that cfg80211_mutex is held don't actually use any data protected by it. The functions that need to hold the cfg80211_mutex are the ones using the cfg80211_regdomain variable, so add the lock assertion to those and clarify this in the comments. The reason for this is that nl80211 uses the regdom without being able to hold reg_mutex. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 7523978..603a019 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -94,14 +94,14 @@ static struct device_type reg_device_type = { /* * Central wireless core regulatory domains, we only need two, * the current one and a world regulatory domain in case we have no - * information to give us an alpha2 + * information to give us an alpha2. + * Protected by the cfg80211_mutex. */ const struct ieee80211_regdomain *cfg80211_regdomain; /* * Protects static reg.c components: * - cfg80211_world_regdom - * - cfg80211_regdom * - last_request * - reg_num_devs_support_basehint */ @@ -185,6 +185,9 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); static void reset_regdomains(bool full_reset) { + assert_cfg80211_lock(); + assert_reg_lock(); + /* avoid freeing static information or freeing something twice */ if (cfg80211_regdomain == cfg80211_world_regdom) cfg80211_regdomain = NULL; @@ -215,6 +218,9 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { WARN_ON(!last_request); + assert_cfg80211_lock(); + assert_reg_lock(); + reset_regdomains(false); cfg80211_world_regdom = rd; @@ -422,8 +428,6 @@ static int call_crda(const char *alpha2) /* Used by nl80211 before kmalloc'ing our regulatory domain */ bool reg_is_valid_request(const char *alpha2) { - assert_cfg80211_lock(); - if (!last_request) return false; @@ -915,8 +919,6 @@ bool reg_last_request_cell_base(void) { bool val; - assert_cfg80211_lock(); - mutex_lock(®_mutex); val = reg_request_cell_base(last_request); mutex_unlock(®_mutex); @@ -999,8 +1001,6 @@ static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, bool channel_changed = false; struct ieee80211_channel chan_before; - assert_cfg80211_lock(); - sband = wiphy->bands[reg_beacon->chan.band]; chan = &sband->channels[chan_idx]; @@ -1042,8 +1042,6 @@ static void wiphy_update_new_beacon(struct wiphy *wiphy, unsigned int i; struct ieee80211_supported_band *sband; - assert_cfg80211_lock(); - if (!wiphy->bands[reg_beacon->chan.band]) return; @@ -1062,8 +1060,6 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) struct ieee80211_supported_band *sband; struct reg_beacon *reg_beacon; - assert_cfg80211_lock(); - list_for_each_entry(reg_beacon, ®_beacon_list, list) { if (!wiphy->bands[reg_beacon->chan.band]) continue; @@ -1075,6 +1071,8 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) static bool reg_is_world_roaming(struct wiphy *wiphy) { + assert_cfg80211_lock(); + if (is_world_regdom(cfg80211_regdomain->alpha2) || (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) return true; @@ -1116,8 +1114,6 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; unsigned int i; - assert_cfg80211_lock(); - if (!is_ht40_allowed(channel)) { channel->flags |= IEEE80211_CHAN_NO_HT40; return; @@ -1180,6 +1176,7 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, { enum ieee80211_band band; + assert_cfg80211_lock(); assert_reg_lock(); if (ignore_reg_update(wiphy, initiator)) @@ -1299,8 +1296,6 @@ get_reg_request_treatment(struct wiphy *wiphy, { struct wiphy *last_wiphy = NULL; - assert_cfg80211_lock(); - /* All initial requests are respected */ if (!last_request) return REG_REQ_OK; @@ -2246,8 +2241,6 @@ int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env) void wiphy_regulatory_register(struct wiphy *wiphy) { - assert_cfg80211_lock(); - mutex_lock(®_mutex); if (!reg_dev_ignore_cell_hint(wiphy)) @@ -2263,8 +2256,6 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) { struct wiphy *request_wiphy = NULL; - assert_cfg80211_lock(); - mutex_lock(®_mutex); if (!reg_dev_ignore_cell_hint(wiphy)) -- cgit v0.10.2 From 540f6f2cc545da9ae2baa9faa3152fc550bedb57 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 00:19:24 +0100 Subject: regulatory: remove locking from wiphy_apply_custom_regulatory wiphy_apply_custom_regulatory() doesn't have to hold the regulatory mutex as it only modifies the given wiphy with the given regulatory domain, it doesn't access any global regulatory data. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 603a019..752729e 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1225,8 +1225,6 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - assert_reg_lock(); - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), desired_bw_khz, ®_rule, regd); @@ -1271,14 +1269,12 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, enum ieee80211_band band; unsigned int bands_set = 0; - mutex_lock(®_mutex); for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (!wiphy->bands[band]) continue; handle_band_custom(wiphy, wiphy->bands[band], regd); bands_set++; } - mutex_unlock(®_mutex); /* * no point in calling this if it won't have any effect -- cgit v0.10.2 From 6913b49a5071064f49f7a74b432286fa735f7612 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 00:48:59 +0100 Subject: regulatory: fix reg_is_valid_request handling There's a bug with the world regulatory domain, it can be updated any time which is different from all other regdomains that can only be updated once after a request for them. Fix this by adding a check for "processed" to the reg_is_valid_request() function and clear that when doing a request. While looking at this I also found another locking bug, last_request is protected by the reg_mutex not the cfg80211_mutex so the code in nl80211 is racy. Remove that code as it only tries to prevent an allocation in an error case, which isn't necessary. Then the function can also become static and locking in nl80211 can have a smaller scope. Also change __set_regdom() to do the checks earlier and not different for world/other regdomains. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 9c2c918..b387dea 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4265,21 +4265,12 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } - mutex_lock(&cfg80211_mutex); - - if (!reg_is_valid_request(alpha2)) { - r = -EINVAL; - goto bad_reg; - } - size_of_regd = sizeof(struct ieee80211_regdomain) + num_rules * sizeof(struct ieee80211_reg_rule); rd = kzalloc(size_of_regd, GFP_KERNEL); - if (!rd) { - r = -ENOMEM; - goto bad_reg; - } + if (!rd) + return -ENOMEM; rd->n_reg_rules = num_rules; rd->alpha2[0] = alpha2[0]; @@ -4309,11 +4300,14 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) } } + mutex_lock(&cfg80211_mutex); + r = set_regdom(rd); + /* set_regdom took ownership */ rd = NULL; + mutex_unlock(&cfg80211_mutex); bad_reg: - mutex_unlock(&cfg80211_mutex); kfree(rd); return r; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 752729e..b3f94c9 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -425,12 +425,16 @@ static int call_crda(const char *alpha2) return kobject_uevent(®_pdev->dev.kobj, KOBJ_CHANGE); } -/* Used by nl80211 before kmalloc'ing our regulatory domain */ -bool reg_is_valid_request(const char *alpha2) +static bool reg_is_valid_request(const char *alpha2) { + assert_reg_lock(); + if (!last_request) return false; + if (last_request->processed) + return false; + return alpha2_equal(last_request->alpha2, alpha2); } @@ -1470,6 +1474,7 @@ new_request: last_request = pending_request; last_request->intersect = intersect; + last_request->processed = false; pending_request = NULL; @@ -2060,11 +2065,13 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) const struct ieee80211_regdomain *regd; const struct ieee80211_regdomain *intersected_rd = NULL; struct wiphy *request_wiphy; + /* Some basic sanity checks first */ + if (!reg_is_valid_request(rd->alpha2)) + return -EINVAL; + if (is_world_regdom(rd->alpha2)) { - if (WARN_ON(!reg_is_valid_request(rd->alpha2))) - return -EINVAL; update_world_regdomain(rd); return 0; } @@ -2073,9 +2080,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) !is_unknown_alpha2(rd->alpha2)) return -EINVAL; - if (!last_request) - return -EINVAL; - /* * Lets only bother proceeding on the same alpha2 if the current * rd is non static (it means CRDA was present and was used last) @@ -2097,9 +2101,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * internal EEPROM data */ - if (WARN_ON(!reg_is_valid_request(rd->alpha2))) - return -EINVAL; - if (!is_valid_rd(rd)) { pr_err("Invalid regulatory domain detected:\n"); print_regdomain_info(rd); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 37891e8..d391b50 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -19,7 +19,6 @@ extern const struct ieee80211_regdomain *cfg80211_regdomain; bool is_world_regdom(const char *alpha2); -bool reg_is_valid_request(const char *alpha2); bool reg_supported_dfs_region(u8 dfs_region); int regulatory_hint_user(const char *alpha2, -- cgit v0.10.2 From fe7ef5e9ba0c60bab01390493a4c6790f7b093af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 15:07:34 +0100 Subject: regulatory: remove handling of channel bandwidth The channel bandwidth handling isn't really quite right, it assumes that a 40 MHz channel is really two 20 MHz channels, which isn't strictly true. This is the way the regulatory database handling is defined right now though so remove the logic to handle other channel widths. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index d816980..8ae58c40 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -195,7 +195,6 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - u32 bandwidth = 0; int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -216,7 +215,6 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { r = freq_reg_info(wiphy, ch->center_freq, - bandwidth, ®_rule); if (r) continue; @@ -254,7 +252,6 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - u32 bandwidth = 0; int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; @@ -283,7 +280,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) @@ -291,7 +288,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index a90b722..3027251 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -686,7 +686,7 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { ret = freq_reg_info(wiphy, ch->center_freq, - 0, &rule); + &rule); if (ret) continue; diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index c1608cd..be55dc9 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -158,7 +158,6 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - u32 bandwidth = 0; int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -174,8 +173,7 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, (ch->flags & IEEE80211_CHAN_RADAR)) continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, ch->center_freq, - bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (r) continue; @@ -211,7 +209,6 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - u32 bandwidth = 0; int r; if (!wiphy->bands[IEEE80211_BAND_2GHZ]) @@ -240,7 +237,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) @@ -248,7 +245,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8e6a6b7..c222e5f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2938,10 +2938,6 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @desired_bw_khz: the desired max bandwidth you want to use per - * channel. Note that this is still 20 MHz if you want to use HT40 - * as HT40 makes use of two channels for its 40 MHz width bandwidth. - * If set to 0 we'll assume you want the standard 20 MHz. * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on @@ -2956,9 +2952,7 @@ extern void wiphy_apply_custom_regulatory( * freq_in_rule_band() for our current definition of a band -- this is purely * subjective and right now its 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule); /* diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b3f94c9..2e38b47 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -480,8 +480,7 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd) } static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, - u32 center_freq_khz, - u32 bw_khz) + u32 center_freq_khz, u32 bw_khz) { u32 start_freq_khz, end_freq_khz; @@ -682,9 +681,7 @@ static u32 map_regdom_flags(u32 rd_flags) return channel_flags; } -static int freq_reg_info_regd(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule, const struct ieee80211_regdomain *regd) { @@ -692,9 +689,6 @@ static int freq_reg_info_regd(struct wiphy *wiphy, bool band_rule_found = false; bool bw_fits = false; - if (!desired_bw_khz) - desired_bw_khz = MHZ_TO_KHZ(20); - if (!regd) return -EINVAL; @@ -713,7 +707,7 @@ static int freq_reg_info_regd(struct wiphy *wiphy, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, center_freq, desired_bw_khz); + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); if (band_rule_found && bw_fits) { *reg_rule = rr; @@ -727,7 +721,7 @@ static int freq_reg_info_regd(struct wiphy *wiphy, return -EINVAL; } -int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, +int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule) { const struct ieee80211_regdomain *regd; @@ -746,8 +740,7 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, else regd = cfg80211_regdomain; - return freq_reg_info_regd(wiphy, center_freq, desired_bw_khz, - reg_rule, regd); + return freq_reg_info_regd(wiphy, center_freq, reg_rule, regd); } EXPORT_SYMBOL(freq_reg_info); @@ -770,7 +763,6 @@ static const char *reg_initiator_name(enum nl80211_reg_initiator initiator) } static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, - u32 desired_bw_khz, const struct ieee80211_reg_rule *reg_rule) { const struct ieee80211_power_rule *power_rule; @@ -785,8 +777,8 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, else snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain); - REG_DBG_PRINT("Updating information on frequency %d MHz for a %d MHz width channel with regulatory rule:\n", - chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Updating information on frequency %d MHz with regulatory rule:\n", + chan->center_freq); REG_DBG_PRINT("%d KHz - %d KHz @ %d KHz), (%s mBi, %d mBm)\n", freq_range->start_freq_khz, freq_range->end_freq_khz, @@ -795,7 +787,6 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, } #else static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, - u32 desired_bw_khz, const struct ieee80211_reg_rule *reg_rule) { return; @@ -805,11 +796,7 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, /* * Note that right now we assume the desired channel bandwidth * is always 20 MHz for each individual channel (HT40 uses 20 MHz - * per channel, the primary and the extension channel). To support - * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a - * new ieee80211_channel.target_bw and re run the regulatory check - * on the wiphy with the target_bw specified. Then we can simply use - * that below for the desired_bw_khz below. + * per channel, the primary and the extension channel). */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, @@ -817,7 +804,6 @@ static void handle_channel(struct wiphy *wiphy, { int r; u32 flags, bw_flags = 0; - u32 desired_bw_khz = MHZ_TO_KHZ(20); const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; @@ -829,8 +815,7 @@ static void handle_channel(struct wiphy *wiphy, flags = chan->orig_flags; - r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, ®_rule); + r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), ®_rule); if (r) { /* * We will disable all channels that do not match our @@ -851,7 +836,7 @@ static void handle_channel(struct wiphy *wiphy, return; } - chan_reg_rule_print_dbg(chan, desired_bw_khz, reg_rule); + chan_reg_rule_print_dbg(chan, reg_rule); power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; @@ -1223,23 +1208,22 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_regdomain *regd) { int r; - u32 desired_bw_khz = MHZ_TO_KHZ(20); u32 bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, ®_rule, regd); + ®_rule, regd); if (r) { - REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits a %d MHz wide channel\n", - chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits it\n", + chan->center_freq); chan->flags = IEEE80211_CHAN_DISABLED; return; } - chan_reg_rule_print_dbg(chan, desired_bw_khz, reg_rule); + chan_reg_rule_print_dbg(chan, reg_rule); power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; -- cgit v0.10.2 From 379b82f4c9dc6e67bf61aa61b096c06a2f320f60 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:44:07 +0100 Subject: regulatory: pass new regdomain to reset function Instead of assigning after calling the function do it inside the function. This will later avoid a period of time where the pointer is NULL. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2e38b47..35541d6 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -183,7 +183,8 @@ static char user_alpha2[2]; module_param(ieee80211_regdom, charp, 0444); MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); -static void reset_regdomains(bool full_reset) +static void reset_regdomains(bool full_reset, + const struct ieee80211_regdomain *new_regdom) { assert_cfg80211_lock(); assert_reg_lock(); @@ -200,7 +201,7 @@ static void reset_regdomains(bool full_reset) kfree(cfg80211_world_regdom); cfg80211_world_regdom = &world_regdom; - cfg80211_regdomain = NULL; + cfg80211_regdomain = new_regdom; if (!full_reset) return; @@ -221,10 +222,9 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) assert_cfg80211_lock(); assert_reg_lock(); - reset_regdomains(false); + reset_regdomains(false, rd); cfg80211_world_regdom = rd; - cfg80211_regdomain = rd; } bool is_world_regdom(const char *alpha2) @@ -1817,7 +1817,7 @@ static void restore_regulatory_settings(bool reset_user) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true); + reset_regdomains(true, cfg80211_world_regdom); restore_alpha2(alpha2, reset_user); /* @@ -1848,9 +1848,8 @@ static void restore_regulatory_settings(bool reset_user) } /* First restore to the basic regulatory settings */ - cfg80211_regdomain = cfg80211_world_regdom; - world_alpha2[0] = cfg80211_regdomain->alpha2[0]; - world_alpha2[1] = cfg80211_regdomain->alpha2[1]; + world_alpha2[0] = cfg80211_world_regdom->alpha2[0]; + world_alpha2[1] = cfg80211_world_regdom->alpha2[1]; list_for_each_entry(rdev, &cfg80211_rdev_list, list) { if (rdev->wiphy.flags & WIPHY_FLAG_CUSTOM_REGULATORY) @@ -2101,8 +2100,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (!last_request->intersect) { if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { - reset_regdomains(false); - cfg80211_regdomain = rd; + reset_regdomains(false, rd); return 0; } @@ -2123,8 +2121,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return PTR_ERR(regd); request_wiphy->regd = regd; - reset_regdomains(false); - cfg80211_regdomain = rd; + reset_regdomains(false, rd); return 0; } @@ -2147,8 +2144,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) rd = NULL; - reset_regdomains(false); - cfg80211_regdomain = intersected_rd; + reset_regdomains(false, intersected_rd); return 0; } @@ -2319,7 +2315,7 @@ void regulatory_exit(void) /* Lock to suppress warnings */ mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true); + reset_regdomains(true, NULL); mutex_unlock(&cfg80211_mutex); mutex_unlock(®_mutex); -- cgit v0.10.2 From 458f4f9e960b9a3b674c4b87d996eef186b1fe83 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:47:38 +0100 Subject: regulatory: use RCU to protect global and wiphy regdomains To simplify the locking and not require cfg80211_mutex (which nl80211 uses to access the global regdomain) and also to make it possible for drivers to access their wiphy->regd safely, use RCU to protect these pointers. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c222e5f..f3be58a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2369,7 +2369,7 @@ struct wiphy { /* fields below are read-only, assigned by cfg80211 */ - const struct ieee80211_regdomain *regd; + const struct ieee80211_regdomain __rcu *regd; /* the item in /sys/class/ieee80211/ points to this, * you need use set_wiphy_dev() (see below) */ diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 7dcaa27..96b0f07 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -18,6 +18,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#include /** * enum environment_cap - Environment parsed from country IE @@ -101,6 +102,7 @@ struct ieee80211_reg_rule { }; struct ieee80211_regdomain { + struct rcu_head rcu_head; u32 n_reg_rules; char alpha2[2]; u8 dfs_region; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b387dea..b3cf7cc 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3787,12 +3787,8 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) * window between nl80211_init() and regulatory_init(), if that is * even possible. */ - mutex_lock(&cfg80211_mutex); - if (unlikely(!cfg80211_regdomain)) { - mutex_unlock(&cfg80211_mutex); + if (unlikely(!rcu_access_pointer(cfg80211_regdomain))) return -EINPROGRESS; - } - mutex_unlock(&cfg80211_mutex); if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) return -EINVAL; @@ -4152,6 +4148,7 @@ static int nl80211_update_mesh_config(struct sk_buff *skb, static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) { + const struct ieee80211_regdomain *regdom; struct sk_buff *msg; void *hdr = NULL; struct nlattr *nl_reg_rules; @@ -4174,35 +4171,36 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) if (!hdr) goto put_failure; - if (nla_put_string(msg, NL80211_ATTR_REG_ALPHA2, - cfg80211_regdomain->alpha2) || - (cfg80211_regdomain->dfs_region && - nla_put_u8(msg, NL80211_ATTR_DFS_REGION, - cfg80211_regdomain->dfs_region))) - goto nla_put_failure; - if (reg_last_request_cell_base() && nla_put_u32(msg, NL80211_ATTR_USER_REG_HINT_TYPE, NL80211_USER_REG_HINT_CELL_BASE)) goto nla_put_failure; + rcu_read_lock(); + regdom = rcu_dereference(cfg80211_regdomain); + + if (nla_put_string(msg, NL80211_ATTR_REG_ALPHA2, regdom->alpha2) || + (regdom->dfs_region && + nla_put_u8(msg, NL80211_ATTR_DFS_REGION, regdom->dfs_region))) + goto nla_put_failure_rcu; + nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES); if (!nl_reg_rules) - goto nla_put_failure; + goto nla_put_failure_rcu; - for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) { + for (i = 0; i < regdom->n_reg_rules; i++) { struct nlattr *nl_reg_rule; const struct ieee80211_reg_rule *reg_rule; const struct ieee80211_freq_range *freq_range; const struct ieee80211_power_rule *power_rule; - reg_rule = &cfg80211_regdomain->reg_rules[i]; + reg_rule = ®dom->reg_rules[i]; freq_range = ®_rule->freq_range; power_rule = ®_rule->power_rule; nl_reg_rule = nla_nest_start(msg, i); if (!nl_reg_rule) - goto nla_put_failure; + goto nla_put_failure_rcu; if (nla_put_u32(msg, NL80211_ATTR_REG_RULE_FLAGS, reg_rule->flags) || @@ -4216,10 +4214,11 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) power_rule->max_antenna_gain) || nla_put_u32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP, power_rule->max_eirp)) - goto nla_put_failure; + goto nla_put_failure_rcu; nla_nest_end(msg, nl_reg_rule); } + rcu_read_unlock(); nla_nest_end(msg, nl_reg_rules); @@ -4227,6 +4226,8 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) err = genlmsg_reply(msg, info); goto out; +nla_put_failure_rcu: + rcu_read_unlock(); nla_put_failure: genlmsg_cancel(msg, hdr); put_failure: diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 35541d6..9b64b20 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -95,15 +95,15 @@ static struct device_type reg_device_type = { * Central wireless core regulatory domains, we only need two, * the current one and a world regulatory domain in case we have no * information to give us an alpha2. - * Protected by the cfg80211_mutex. */ -const struct ieee80211_regdomain *cfg80211_regdomain; +const struct ieee80211_regdomain __rcu *cfg80211_regdomain; /* * Protects static reg.c components: - * - cfg80211_world_regdom - * - last_request - * - reg_num_devs_support_basehint + * - cfg80211_regdomain (if not used with RCU) + * - cfg80211_world_regdom + * - last_request + * - reg_num_devs_support_basehint */ static DEFINE_MUTEX(reg_mutex); @@ -118,6 +118,25 @@ static inline void assert_reg_lock(void) lockdep_assert_held(®_mutex); } +static const struct ieee80211_regdomain *get_cfg80211_regdom(void) +{ + return rcu_dereference_protected(cfg80211_regdomain, + lockdep_is_held(®_mutex)); +} + +static const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy) +{ + return rcu_dereference_protected(wiphy->regd, + lockdep_is_held(®_mutex)); +} + +static void rcu_free_regdom(const struct ieee80211_regdomain *r) +{ + if (!r) + return; + kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); +} + /* Used to queue up regulatory hints */ static LIST_HEAD(reg_requests_list); static spinlock_t reg_requests_lock; @@ -186,22 +205,25 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); static void reset_regdomains(bool full_reset, const struct ieee80211_regdomain *new_regdom) { - assert_cfg80211_lock(); + const struct ieee80211_regdomain *r; + assert_reg_lock(); + r = get_cfg80211_regdom(); + /* avoid freeing static information or freeing something twice */ - if (cfg80211_regdomain == cfg80211_world_regdom) - cfg80211_regdomain = NULL; + if (r == cfg80211_world_regdom) + r = NULL; if (cfg80211_world_regdom == &world_regdom) cfg80211_world_regdom = NULL; - if (cfg80211_regdomain == &world_regdom) - cfg80211_regdomain = NULL; + if (r == &world_regdom) + r = NULL; - kfree(cfg80211_regdomain); - kfree(cfg80211_world_regdom); + rcu_free_regdom(r); + rcu_free_regdom(cfg80211_world_regdom); cfg80211_world_regdom = &world_regdom; - cfg80211_regdomain = new_regdom; + rcu_assign_pointer(cfg80211_regdomain, new_regdom); if (!full_reset) return; @@ -219,7 +241,6 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { WARN_ON(!last_request); - assert_cfg80211_lock(); assert_reg_lock(); reset_regdomains(false, rd); @@ -280,11 +301,11 @@ static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) static bool regdom_changes(const char *alpha2) { - assert_cfg80211_lock(); + const struct ieee80211_regdomain *r = get_cfg80211_regdom(); - if (!cfg80211_regdomain) + if (!r) return true; - return !alpha2_equal(cfg80211_regdomain->alpha2, alpha2); + return !alpha2_equal(r->alpha2, alpha2); } /* @@ -727,7 +748,6 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_regdomain *regd; assert_reg_lock(); - assert_cfg80211_lock(); /* * Follow the driver's regulatory domain, if present, unless a country @@ -736,9 +756,9 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && last_request->initiator != NL80211_REGDOM_SET_BY_USER && wiphy->regd) - regd = wiphy->regd; + regd = get_wiphy_regdom(wiphy); else - regd = cfg80211_regdomain; + regd = get_cfg80211_regdom(); return freq_reg_info_regd(wiphy, center_freq, reg_rule, regd); } @@ -809,8 +829,6 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_freq_range *freq_range = NULL; struct wiphy *request_wiphy = NULL; - assert_cfg80211_lock(); - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); flags = chan->orig_flags; @@ -1060,15 +1078,17 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) static bool reg_is_world_roaming(struct wiphy *wiphy) { - assert_cfg80211_lock(); + const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); + const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); - if (is_world_regdom(cfg80211_regdomain->alpha2) || - (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) + if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) return true; + if (last_request && last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) return true; + return false; } @@ -1165,13 +1185,12 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, { enum ieee80211_band band; - assert_cfg80211_lock(); assert_reg_lock(); if (ignore_reg_update(wiphy, initiator)) return; - last_request->dfs_region = cfg80211_regdomain->dfs_region; + last_request->dfs_region = get_cfg80211_regdom()->dfs_region; for (band = 0; band < IEEE80211_NUM_BANDS; band++) handle_band(wiphy, initiator, wiphy->bands[band]); @@ -1188,6 +1207,8 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) struct cfg80211_registered_device *rdev; struct wiphy *wiphy; + assert_cfg80211_lock(); + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { wiphy = &rdev->wiphy; wiphy_update_regulatory(wiphy, initiator); @@ -1402,7 +1423,7 @@ static void reg_set_request_processed(void) * * Returns one of the different reg request treatment values. * - * Caller must hold &cfg80211_mutex and ®_mutex + * Caller must hold ®_mutex */ static enum reg_request_treatment __regulatory_hint(struct wiphy *wiphy, @@ -1412,20 +1433,18 @@ __regulatory_hint(struct wiphy *wiphy, bool intersect = false; enum reg_request_treatment treatment; - assert_cfg80211_lock(); - treatment = get_reg_request_treatment(wiphy, pending_request); switch (treatment) { case REG_REQ_INTERSECT: if (pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - regd = reg_copy_regd(cfg80211_regdomain); + regd = reg_copy_regd(get_cfg80211_regdom()); if (IS_ERR(regd)) { kfree(pending_request); return PTR_ERR(regd); } - wiphy->regd = regd; + rcu_assign_pointer(wiphy->regd, regd); } intersect = true; break; @@ -1439,13 +1458,13 @@ __regulatory_hint(struct wiphy *wiphy, */ if (treatment == REG_REQ_ALREADY_SET && pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - regd = reg_copy_regd(cfg80211_regdomain); + regd = reg_copy_regd(get_cfg80211_regdom()); if (IS_ERR(regd)) { kfree(pending_request); return REG_REQ_IGNORE; } treatment = REG_REQ_ALREADY_SET; - wiphy->regd = regd; + rcu_assign_pointer(wiphy->regd, regd); goto new_request; } kfree(pending_request); @@ -2051,6 +2070,8 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Some basic sanity checks first */ + assert_reg_lock(); + if (!reg_is_valid_request(rd->alpha2)) return -EINVAL; @@ -2120,7 +2141,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (IS_ERR(regd)) return PTR_ERR(regd); - request_wiphy->regd = regd; + rcu_assign_pointer(request_wiphy->regd, regd); reset_regdomains(false, rd); return 0; } @@ -2128,7 +2149,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Intersection requires a bit more work */ if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { - intersected_rd = regdom_intersect(rd, cfg80211_regdomain); + intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); if (!intersected_rd) return -EINVAL; @@ -2138,7 +2159,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * domain we keep it for its private use */ if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) - request_wiphy->regd = rd; + rcu_assign_pointer(request_wiphy->regd, rd); else kfree(rd); @@ -2156,14 +2177,12 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* * Use this call to set the current regulatory domain. Conflicts with * multiple drivers can be ironed out later. Caller must've already - * kmalloc'd the rd structure. Caller must hold cfg80211_mutex + * kmalloc'd the rd structure. */ int set_regdom(const struct ieee80211_regdomain *rd) { int r; - assert_cfg80211_lock(); - mutex_lock(®_mutex); /* Note that this doesn't update the wiphys, this is done below */ @@ -2177,7 +2196,8 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - if (WARN_ON(!last_request->intersect && rd != cfg80211_regdomain)) { + if (WARN_ON(!last_request->intersect && + rd != get_cfg80211_regdom())) { r = -EINVAL; goto out; } @@ -2185,7 +2205,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); - print_regdomain(cfg80211_regdomain); + print_regdomain(get_cfg80211_regdom()); nl80211_send_reg_change_event(last_request); @@ -2238,7 +2258,8 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) if (!reg_dev_ignore_cell_hint(wiphy)) reg_num_devs_support_basehint--; - kfree(wiphy->regd); + rcu_free_regdom(get_wiphy_regdom(wiphy)); + rcu_assign_pointer(wiphy->regd, NULL); if (last_request) request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); @@ -2273,13 +2294,13 @@ int __init regulatory_init(void) reg_regdb_size_check(); - cfg80211_regdomain = cfg80211_world_regdom; + rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom); user_alpha2[0] = '9'; user_alpha2[1] = '7'; /* We always try to get an update for the static regdomain */ - err = regulatory_hint_core(cfg80211_regdomain->alpha2); + err = regulatory_hint_core(cfg80211_world_regdom->alpha2); if (err) { if (err == -ENOMEM) return err; @@ -2313,10 +2334,8 @@ void regulatory_exit(void) cancel_delayed_work_sync(®_timeout); /* Lock to suppress warnings */ - mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); reset_regdomains(true, NULL); - mutex_unlock(&cfg80211_mutex); mutex_unlock(®_mutex); dev_set_uevent_suppress(®_pdev->dev, true); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index d391b50..af2d5f8 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -extern const struct ieee80211_regdomain *cfg80211_regdomain; +extern const struct ieee80211_regdomain __rcu *cfg80211_regdomain; bool is_world_regdom(const char *alpha2); bool reg_supported_dfs_region(u8 dfs_region); -- cgit v0.10.2 From c492db370c17c428a0a58d3673294d4e99634b7d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 16:29:25 +0100 Subject: regulatory: use RCU to protect last_request This will allow making freq_reg_info() lock-free. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 96b0f07..f17ed59 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -36,6 +36,7 @@ enum environment_cap { /** * struct regulatory_request - used to keep track of regulatory requests * + * @rcu_head: RCU head struct used to free the request * @wiphy_idx: this is set if this request's initiator is * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This * can be used by the wireless core to deal with conflicts @@ -73,6 +74,7 @@ enum environment_cap { * @list: used to insert into the reg_requests_list linked list */ struct regulatory_request { + struct rcu_head rcu_head; int wiphy_idx; enum nl80211_reg_initiator initiator; enum nl80211_user_reg_hint_type user_reg_hint_type; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 9b64b20..2a7c3ad 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -82,7 +82,8 @@ static struct regulatory_request core_request_world = { }; /* Receipt of information from last regulatory request */ -static struct regulatory_request *last_request = &core_request_world; +static struct regulatory_request __rcu *last_request = + (void __rcu *)&core_request_world; /* To trigger userspace events */ static struct platform_device *reg_pdev; @@ -102,7 +103,7 @@ const struct ieee80211_regdomain __rcu *cfg80211_regdomain; * Protects static reg.c components: * - cfg80211_regdomain (if not used with RCU) * - cfg80211_world_regdom - * - last_request + * - last_request (if not used with RCU) * - reg_num_devs_support_basehint */ static DEFINE_MUTEX(reg_mutex); @@ -137,6 +138,12 @@ static void rcu_free_regdom(const struct ieee80211_regdomain *r) kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); } +static struct regulatory_request *get_last_request(void) +{ + return rcu_dereference_protected(last_request, + lockdep_is_held(®_mutex)); +} + /* Used to queue up regulatory hints */ static LIST_HEAD(reg_requests_list); static spinlock_t reg_requests_lock; @@ -206,6 +213,7 @@ static void reset_regdomains(bool full_reset, const struct ieee80211_regdomain *new_regdom) { const struct ieee80211_regdomain *r; + struct regulatory_request *lr; assert_reg_lock(); @@ -228,9 +236,10 @@ static void reset_regdomains(bool full_reset, if (!full_reset) return; - if (last_request != &core_request_world) - kfree(last_request); - last_request = &core_request_world; + lr = get_last_request(); + if (lr != &core_request_world && lr) + kfree_rcu(lr, rcu_head); + rcu_assign_pointer(last_request, &core_request_world); } /* @@ -239,9 +248,11 @@ static void reset_regdomains(bool full_reset, */ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { - WARN_ON(!last_request); + struct regulatory_request *lr; - assert_reg_lock(); + lr = get_last_request(); + + WARN_ON(!lr); reset_regdomains(false, rd); @@ -448,15 +459,12 @@ static int call_crda(const char *alpha2) static bool reg_is_valid_request(const char *alpha2) { - assert_reg_lock(); + struct regulatory_request *lr = get_last_request(); - if (!last_request) + if (!lr || lr->processed) return false; - if (last_request->processed) - return false; - - return alpha2_equal(last_request->alpha2, alpha2); + return alpha2_equal(lr->alpha2, alpha2); } /* Sanity check on a regulatory rule */ @@ -746,15 +754,14 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule) { const struct ieee80211_regdomain *regd; - - assert_reg_lock(); + struct regulatory_request *lr = get_last_request(); /* * Follow the driver's regulatory domain, if present, unless a country * IE has been processed or a user wants to help complaince further */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - last_request->initiator != NL80211_REGDOM_SET_BY_USER && + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + lr->initiator != NL80211_REGDOM_SET_BY_USER && wiphy->regd) regd = get_wiphy_regdom(wiphy); else @@ -828,8 +835,9 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; struct wiphy *request_wiphy = NULL; + struct regulatory_request *lr = get_last_request(); - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); flags = chan->orig_flags; @@ -862,7 +870,7 @@ static void handle_channel(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; - if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && request_wiphy && request_wiphy == wiphy && request_wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) { /* @@ -927,7 +935,7 @@ bool reg_last_request_cell_base(void) bool val; mutex_lock(®_mutex); - val = reg_request_cell_base(last_request); + val = reg_request_cell_base(get_last_request()); mutex_unlock(®_mutex); return val; @@ -938,10 +946,12 @@ bool reg_last_request_cell_base(void) static enum reg_request_treatment reg_ignore_cell_hint(struct regulatory_request *pending_request) { + struct regulatory_request *lr = get_last_request(); + if (!reg_num_devs_support_basehint) return REG_REQ_IGNORE; - if (reg_request_cell_base(last_request) && + if (reg_request_cell_base(lr) && !regdom_changes(pending_request->alpha2)) return REG_REQ_ALREADY_SET; @@ -969,7 +979,9 @@ static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) static bool ignore_reg_update(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { - if (!last_request) { + struct regulatory_request *lr = get_last_request(); + + if (!lr) { REG_DBG_PRINT("Ignoring regulatory request %s since last_request is not set\n", reg_initiator_name(initiator)); return true; @@ -988,13 +1000,13 @@ static bool ignore_reg_update(struct wiphy *wiphy, */ if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY && !wiphy->regd && initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - !is_world_regdom(last_request->alpha2)) { + !is_world_regdom(lr->alpha2)) { REG_DBG_PRINT("Ignoring regulatory request %s since the driver requires its own regulatory domain to be set first\n", reg_initiator_name(initiator)); return true; } - if (reg_request_cell_base(last_request)) + if (reg_request_cell_base(lr)) return reg_dev_ignore_cell_hint(wiphy); return false; @@ -1080,12 +1092,12 @@ static bool reg_is_world_roaming(struct wiphy *wiphy) { const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); + struct regulatory_request *lr = get_last_request(); if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) return true; - if (last_request && - last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) return true; @@ -1184,13 +1196,12 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { enum ieee80211_band band; - - assert_reg_lock(); + struct regulatory_request *lr = get_last_request(); if (ignore_reg_update(wiphy, initiator)) return; - last_request->dfs_region = get_cfg80211_regdom()->dfs_region; + lr->dfs_region = get_cfg80211_regdom()->dfs_region; for (band = 0; band < IEEE80211_NUM_BANDS; band++) handle_band(wiphy, initiator, wiphy->bands[band]); @@ -1199,7 +1210,7 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, reg_process_ht_flags(wiphy); if (wiphy->reg_notifier) - wiphy->reg_notifier(wiphy, last_request); + wiphy->reg_notifier(wiphy, lr); } static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) @@ -1220,7 +1231,7 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) if (initiator == NL80211_REGDOM_SET_BY_CORE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY && wiphy->reg_notifier) - wiphy->reg_notifier(wiphy, last_request); + wiphy->reg_notifier(wiphy, get_last_request()); } } @@ -1300,28 +1311,28 @@ get_reg_request_treatment(struct wiphy *wiphy, struct regulatory_request *pending_request) { struct wiphy *last_wiphy = NULL; + struct regulatory_request *lr = get_last_request(); /* All initial requests are respected */ - if (!last_request) + if (!lr) return REG_REQ_OK; switch (pending_request->initiator) { case NL80211_REGDOM_SET_BY_CORE: return REG_REQ_OK; case NL80211_REGDOM_SET_BY_COUNTRY_IE: - if (reg_request_cell_base(last_request)) { + if (reg_request_cell_base(lr)) { /* Trust a Cell base station over the AP's country IE */ if (regdom_changes(pending_request->alpha2)) return REG_REQ_IGNORE; return REG_REQ_ALREADY_SET; } - last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); if (unlikely(!is_an_alpha2(pending_request->alpha2))) return -EINVAL; - if (last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { if (last_wiphy != wiphy) { /* * Two cards with two APs claiming different @@ -1343,7 +1354,7 @@ get_reg_request_treatment(struct wiphy *wiphy, } return 0; case NL80211_REGDOM_SET_BY_DRIVER: - if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) { + if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) { if (regdom_changes(pending_request->alpha2)) return REG_REQ_OK; return REG_REQ_ALREADY_SET; @@ -1354,7 +1365,7 @@ get_reg_request_treatment(struct wiphy *wiphy, * back in or if you add a new device for which the previously * loaded card also agrees on the regulatory domain. */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && !regdom_changes(pending_request->alpha2)) return REG_REQ_ALREADY_SET; @@ -1363,26 +1374,26 @@ get_reg_request_treatment(struct wiphy *wiphy, if (reg_request_cell_base(pending_request)) return reg_ignore_cell_hint(pending_request); - if (reg_request_cell_base(last_request)) + if (reg_request_cell_base(lr)) return REG_REQ_IGNORE; - if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) return REG_REQ_INTERSECT; /* * If the user knows better the user should set the regdom * to their country before the IE is picked up */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && - last_request->intersect) + if (lr->initiator == NL80211_REGDOM_SET_BY_USER && + lr->intersect) return REG_REQ_IGNORE; /* * Process user requests only after previous user/driver/core * requests have been processed */ - if ((last_request->initiator == NL80211_REGDOM_SET_BY_CORE || - last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || - last_request->initiator == NL80211_REGDOM_SET_BY_USER) && - regdom_changes(last_request->alpha2)) + if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE || + lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || + lr->initiator == NL80211_REGDOM_SET_BY_USER) && + regdom_changes(lr->alpha2)) return REG_REQ_IGNORE; if (!regdom_changes(pending_request->alpha2)) @@ -1397,15 +1408,16 @@ get_reg_request_treatment(struct wiphy *wiphy, static void reg_set_request_processed(void) { bool need_more_processing = false; + struct regulatory_request *lr = get_last_request(); - last_request->processed = true; + lr->processed = true; spin_lock(®_requests_lock); if (!list_empty(®_requests_list)) need_more_processing = true; spin_unlock(®_requests_lock); - if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) + if (lr->initiator == NL80211_REGDOM_SET_BY_USER) cancel_delayed_work(®_timeout); if (need_more_processing) @@ -1432,6 +1444,7 @@ __regulatory_hint(struct wiphy *wiphy, const struct ieee80211_regdomain *regd; bool intersect = false; enum reg_request_treatment treatment; + struct regulatory_request *lr; treatment = get_reg_request_treatment(wiphy, pending_request); @@ -1472,18 +1485,20 @@ __regulatory_hint(struct wiphy *wiphy, } new_request: - if (last_request != &core_request_world) - kfree(last_request); + lr = get_last_request(); + if (lr != &core_request_world && lr) + kfree_rcu(lr, rcu_head); - last_request = pending_request; - last_request->intersect = intersect; - last_request->processed = false; + pending_request->intersect = intersect; + pending_request->processed = false; + rcu_assign_pointer(last_request, pending_request); + lr = pending_request; pending_request = NULL; - if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) { - user_alpha2[0] = last_request->alpha2[0]; - user_alpha2[1] = last_request->alpha2[1]; + if (lr->initiator == NL80211_REGDOM_SET_BY_USER) { + user_alpha2[0] = lr->alpha2[0]; + user_alpha2[1] = lr->alpha2[1]; } /* When r == REG_REQ_INTERSECT we do need to call CRDA */ @@ -1494,13 +1509,13 @@ new_request: * inform userspace we have processed the request */ if (treatment == REG_REQ_ALREADY_SET) { - nl80211_send_reg_change_event(last_request); + nl80211_send_reg_change_event(lr); reg_set_request_processed(); } return treatment; } - if (call_crda(last_request->alpha2)) + if (call_crda(lr->alpha2)) return REG_REQ_IGNORE; return REG_REQ_OK; } @@ -1543,13 +1558,14 @@ static void reg_process_hint(struct regulatory_request *reg_request, */ static void reg_process_pending_hints(void) { - struct regulatory_request *reg_request; + struct regulatory_request *reg_request, *lr; mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); + lr = get_last_request(); /* When last_request->processed becomes true this will be rescheduled */ - if (last_request && !last_request->processed) { + if (lr && !lr->processed) { REG_DBG_PRINT("Pending regulatory request, waiting for it to be processed...\n"); goto out; } @@ -1702,11 +1718,12 @@ void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, { char alpha2[2]; enum environment_cap env = ENVIRON_ANY; - struct regulatory_request *request; + struct regulatory_request *request, *lr; mutex_lock(®_mutex); + lr = get_last_request(); - if (unlikely(!last_request)) + if (unlikely(!lr)) goto out; /* IE len must be evenly divisible by 2 */ @@ -1729,8 +1746,8 @@ void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, * We leave conflict resolution to the workqueue, where can hold * cfg80211_mutex. */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && - last_request->wiphy_idx != WIPHY_IDX_INVALID) + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + lr->wiphy_idx != WIPHY_IDX_INVALID) goto out; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -2021,13 +2038,12 @@ static void print_dfs_region(u8 dfs_region) static void print_regdomain(const struct ieee80211_regdomain *rd) { + struct regulatory_request *lr = get_last_request(); if (is_intersected_alpha2(rd->alpha2)) { - if (last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { struct cfg80211_registered_device *rdev; - rdev = cfg80211_rdev_by_wiphy_idx( - last_request->wiphy_idx); + rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx); if (rdev) { pr_info("Current regulatory domain updated by AP to: %c%c\n", rdev->country_ie_alpha2[0], @@ -2042,7 +2058,7 @@ static void print_regdomain(const struct ieee80211_regdomain *rd) if (is_unknown_alpha2(rd->alpha2)) pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n"); else { - if (reg_request_cell_base(last_request)) + if (reg_request_cell_base(lr)) pr_info("Regulatory domain changed to country: %c%c by Cell Station\n", rd->alpha2[0], rd->alpha2[1]); else @@ -2067,11 +2083,10 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) const struct ieee80211_regdomain *regd; const struct ieee80211_regdomain *intersected_rd = NULL; struct wiphy *request_wiphy; + struct regulatory_request *lr = get_last_request(); /* Some basic sanity checks first */ - assert_reg_lock(); - if (!reg_is_valid_request(rd->alpha2)) return -EINVAL; @@ -2089,7 +2104,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * rd is non static (it means CRDA was present and was used last) * and the pending request came in from a country IE */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { /* * If someone else asked us to change the rd lets only bother * checking if the alpha2 changes if CRDA was already called @@ -2111,16 +2126,16 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return -EINVAL; } - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); if (!request_wiphy && - (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || - last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)) { + (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || + lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)) { schedule_delayed_work(®_timeout, 0); return -ENODEV; } - if (!last_request->intersect) { - if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { + if (!lr->intersect) { + if (lr->initiator != NL80211_REGDOM_SET_BY_DRIVER) { reset_regdomains(false, rd); return 0; } @@ -2148,7 +2163,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Intersection requires a bit more work */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); if (!intersected_rd) return -EINVAL; @@ -2158,7 +2173,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * However if a driver requested this specific regulatory * domain we keep it for its private use */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) rcu_assign_pointer(request_wiphy->regd, rd); else kfree(rd); @@ -2181,9 +2196,11 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) */ int set_regdom(const struct ieee80211_regdomain *rd) { + struct regulatory_request *lr; int r; mutex_lock(®_mutex); + lr = get_last_request(); /* Note that this doesn't update the wiphys, this is done below */ r = __set_regdom(rd); @@ -2196,18 +2213,17 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - if (WARN_ON(!last_request->intersect && - rd != get_cfg80211_regdom())) { + if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom())) { r = -EINVAL; goto out; } /* update all wiphys now with the new established regulatory domain */ - update_all_wiphy_regulatory(last_request->initiator); + update_all_wiphy_regulatory(lr->initiator); print_regdomain(get_cfg80211_regdom()); - nl80211_send_reg_change_event(last_request); + nl80211_send_reg_change_event(lr); reg_set_request_processed(); @@ -2220,10 +2236,11 @@ int set_regdom(const struct ieee80211_regdomain *rd) #ifdef CONFIG_HOTPLUG int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env) { - if (last_request && !last_request->processed) { + struct regulatory_request *lr = get_last_request(); + + if (lr && !lr->processed) { if (add_uevent_var(env, "COUNTRY=%c%c", - last_request->alpha2[0], - last_request->alpha2[1])) + lr->alpha2[0], lr->alpha2[1])) return -ENOMEM; } @@ -2252,8 +2269,10 @@ void wiphy_regulatory_register(struct wiphy *wiphy) void wiphy_regulatory_deregister(struct wiphy *wiphy) { struct wiphy *request_wiphy = NULL; + struct regulatory_request *lr; mutex_lock(®_mutex); + lr = get_last_request(); if (!reg_dev_ignore_cell_hint(wiphy)) reg_num_devs_support_basehint--; @@ -2261,14 +2280,14 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) rcu_free_regdom(get_wiphy_regdom(wiphy)); rcu_assign_pointer(wiphy->regd, NULL); - if (last_request) - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + if (lr) + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); if (!request_wiphy || request_wiphy != wiphy) goto out; - last_request->wiphy_idx = WIPHY_IDX_INVALID; - last_request->country_ie_env = ENVIRON_ANY; + lr->wiphy_idx = WIPHY_IDX_INVALID; + lr->country_ie_env = ENVIRON_ANY; out: mutex_unlock(®_mutex); } -- cgit v0.10.2 From 361c9c8b0eeeec7d881e018d5143bf883558c566 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:57:14 +0100 Subject: regulatory: use IS_ERR macro family for freq_reg_info Instead of returning an error and filling a pointer return the pointer and an ERR_PTR value in error cases. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 8ae58c40..7a6c79e 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -195,7 +195,6 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -213,10 +212,8 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, - ch->center_freq, - ®_rule); - if (r) + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (IS_ERR(reg_rule)) continue; /* * If 11d had a rule for this channel ensure @@ -252,7 +249,6 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; if (!sband) @@ -280,16 +276,16 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 3027251..4eb3f0d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -670,7 +670,7 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *rule; - int band, i, ret; + int band, i; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { sband = wiphy->bands[band]; @@ -685,9 +685,8 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - ret = freq_reg_info(wiphy, ch->center_freq, - &rule); - if (ret) + rule = freq_reg_info(wiphy, ch->center_freq); + if (IS_ERR(rule)) continue; if (!(rule->flags & NL80211_RRF_NO_IBSS)) diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index be55dc9..7e3ead7 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -158,7 +158,6 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -173,8 +172,8 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, (ch->flags & IEEE80211_CHAN_RADAR)) continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (r) + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (IS_ERR(reg_rule)) continue; /* @@ -209,7 +208,6 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - int r; if (!wiphy->bands[IEEE80211_BAND_2GHZ]) return; @@ -237,16 +235,16 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f3be58a..1f74360 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2938,22 +2938,22 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on * a given wireless device. If the device has a specific regulatory domain * it wants to follow we respect that unless a country IE has been received * and processed already. * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. + * When an error occurs, for example if no rule can be found, the return value + * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain + * the numeric return value. The numeric return value will be -ERANGE if we + * determine the given center_freq does not even have a regulatory rule for a + * frequency range in the center_freq's band. See freq_in_rule_band() for our + * current definition of a band -- this is purely subjective and right now it's + * 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule); +const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, + u32 center_freq); /* * callbacks for asynchronous cfg80211 methods, notification diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2a7c3ad..fd53d97 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -710,16 +710,16 @@ static u32 map_regdom_flags(u32 rd_flags) return channel_flags; } -static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule, - const struct ieee80211_regdomain *regd) +static const struct ieee80211_reg_rule * +freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, + const struct ieee80211_regdomain *regd) { int i; bool band_rule_found = false; bool bw_fits = false; if (!regd) - return -EINVAL; + return ERR_PTR(-EINVAL); for (i = 0; i < regd->n_reg_rules; i++) { const struct ieee80211_reg_rule *rr; @@ -738,20 +738,18 @@ static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); - if (band_rule_found && bw_fits) { - *reg_rule = rr; - return 0; - } + if (band_rule_found && bw_fits) + return rr; } if (!band_rule_found) - return -ERANGE; + return ERR_PTR(-ERANGE); - return -EINVAL; + return ERR_PTR(-EINVAL); } -int freq_reg_info(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule) +const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, + u32 center_freq) { const struct ieee80211_regdomain *regd; struct regulatory_request *lr = get_last_request(); @@ -767,7 +765,7 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, else regd = get_cfg80211_regdom(); - return freq_reg_info_regd(wiphy, center_freq, reg_rule, regd); + return freq_reg_info_regd(wiphy, center_freq, regd); } EXPORT_SYMBOL(freq_reg_info); @@ -829,7 +827,6 @@ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, struct ieee80211_channel *chan) { - int r; u32 flags, bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; @@ -841,8 +838,8 @@ static void handle_channel(struct wiphy *wiphy, flags = chan->orig_flags; - r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), ®_rule); - if (r) { + reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq)); + if (IS_ERR(reg_rule)) { /* * We will disable all channels that do not match our * received regulatory rule unless the hint is coming @@ -854,7 +851,7 @@ static void handle_channel(struct wiphy *wiphy, * while 5 GHz is still supported. */ if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && - r == -ERANGE) + PTR_ERR(reg_rule) == -ERANGE) return; REG_DBG_PRINT("Disabling freq %d MHz\n", chan->center_freq); @@ -1239,16 +1236,15 @@ static void handle_channel_custom(struct wiphy *wiphy, struct ieee80211_channel *chan, const struct ieee80211_regdomain *regd) { - int r; u32 bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), - ®_rule, regd); + reg_rule = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), + regd); - if (r) { + if (IS_ERR(reg_rule)) { REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits it\n", chan->center_freq); chan->flags = IEEE80211_CHAN_DISABLED; -- cgit v0.10.2 From 75de9113bb9dc4939a7cd54e4bdfad555b35f5b1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:56:03 +0100 Subject: mac80211: optimise AP stop RCU handling If there are VLANs, stopping an AP is inefficient as it calls rcu_barrier() once for each interface (the VLANs and the AP itself). Optimise this by moving rcu_barrier() out of the station cleanups and calling it only once for all interfaces combined. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index be01953..908f115 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1010,8 +1010,13 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree_rcu(old_probe_resp, rcu_head); list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - sta_info_flush(vlan); - sta_info_flush(sdata); + sta_info_flush_defer(vlan); + sta_info_flush_defer(sdata); + rcu_barrier(); + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + sta_info_flush_cleanup(vlan); + sta_info_flush_cleanup(sdata); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 12341ef..1ab7d8e 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -863,12 +863,15 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->work); /* * When we get here, the interface is marked down. - * sta_info_flush_cleanup() calls rcu_barrier to - * wait for the station call_rcu() calls to complete, - * here we require it to wait for the RX path in case - * it is using the interface and enqueuing frames at - * this very time on another CPU. + * + * sta_info_flush_cleanup() requires rcu_barrier() + * first to wait for the station call_rcu() calls + * to complete, here we need at least sychronize_rcu() + * it to wait for the RX path in case it is using the + * interface and enqueuing frames at this very time on + * another CPU. */ + rcu_barrier(); sta_info_flush_cleanup(sdata); skb_queue_purge(&sdata->skb_queue); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 7199b9d..738f934 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -920,8 +920,6 @@ int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata) void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata) { - rcu_barrier(); - ieee80211_cleanup_sdata_stas(sdata); cancel_work_sync(&sdata->cleanup_stations_wk); } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index c3266aed..031e4a5 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -549,6 +549,19 @@ void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata); + +/** + * sta_info_flush_cleanup - flush the sta_info cleanup queue + * @sdata: the interface + * + * Flushes the sta_info cleanup queue for a given interface; + * this is necessary before the interface is removed or, for + * AP/mesh interfaces, before it is deconfigured. + * + * Note an rcu_barrier() must precede the function, after all + * stations have been flushed/removed to ensure the call_rcu() + * calls that add stations to the cleanup queue have completed. + */ void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata); /** @@ -562,6 +575,7 @@ static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata) { int ret = sta_info_flush_defer(sdata); + rcu_barrier(); sta_info_flush_cleanup(sdata); return ret; -- cgit v0.10.2 From 9cab315190cddbe3aaa31b64841354dd719afdfd Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 00:19:08 +0100 Subject: cfg80211: adjacent 80+80 MHz channel segments are invalid In that case, it's really a 160 MHz channel, so disallow this configuration. Signed-off-by: Johannes Berg diff --git a/net/wireless/chan.c b/net/wireless/chan.c index a7990bb..396373f 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -76,6 +76,10 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef) return false; if (!chandef->center_freq2) return false; + /* adjacent is not allowed -- that's a 160 MHz channel */ + if (chandef->center_freq1 - chandef->center_freq2 == 80 || + chandef->center_freq2 - chandef->center_freq1 == 80) + return false; break; case NL80211_CHAN_WIDTH_80: if (chandef->center_freq1 != control_freq + 30 && -- cgit v0.10.2 From cc3983d8ab174ca43d5817f16c489b3cce3a795a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 7 Dec 2012 12:45:06 +0100 Subject: mac80211: fix ieee80211_ie_build_vht_cap indentation Signed-off-by: Johannes Berg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index f11e8c5..051313f 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1864,7 +1864,7 @@ u8 *ieee80211_ie_build_ht_cap(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap, } u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap, - u32 cap) + u32 cap) { __le32 tmp; -- cgit v0.10.2 From d45c41722a3eca639ced2c4c93665ced229b1da9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 10 Dec 2012 16:19:13 +0200 Subject: mac82011: use frame control to differentiate probe resp/beacon The probe response/beacon management frame RX code passes a bool parameter to differentiate beacons and probe responses. This is useless since we have the frame and can thus use its frame control field. Moreover it is buggy since there is one call to ieee80211_rx_bss_info with a beacon frame that is indicated as a probe response, which is also fixed by using the frame control field, so do that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 854de97..2722749 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -425,11 +425,9 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata, } static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, + struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status, - struct ieee802_11_elems *elems, - bool beacon) + struct ieee802_11_elems *elems) { struct ieee80211_local *local = sdata->local; int freq; @@ -530,7 +528,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, } bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, - channel, beacon); + channel); if (!bss) return; @@ -877,14 +875,21 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, ieee80211_tx_skb(sdata, skb); } -static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) +static +void ieee80211_rx_mgmt_probe_beacon(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + struct ieee80211_rx_status *rx_status) { size_t baselen; struct ieee802_11_elems elems; + BUILD_BUG_ON(offsetof(typeof(mgmt->u.probe_resp), variable) != + offsetof(typeof(mgmt->u.beacon), variable)); + + /* + * either beacon or probe_resp but the variable field is at the + * same offset + */ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; if (baselen > len) return; @@ -892,25 +897,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, &elems); - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); -} - -static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) -{ - size_t baselen; - struct ieee802_11_elems elems; - - /* Process beacon from the current BSS */ - baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; - if (baselen > len) - return; - - ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); - - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, true); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); } void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, @@ -934,12 +921,9 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_rx_mgmt_probe_req(sdata, skb); break; case IEEE80211_STYPE_PROBE_RESP: - ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len, - rx_status); - break; case IEEE80211_STYPE_BEACON: - ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, - rx_status); + ieee80211_rx_mgmt_probe_beacon(sdata, mgmt, skb->len, + rx_status); break; case IEEE80211_STYPE_AUTH: ieee80211_rx_mgmt_auth_ibss(sdata, mgmt, skb->len); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8563b9a..fa6d43e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1346,8 +1346,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local, struct ieee80211_mgmt *mgmt, size_t len, struct ieee802_11_elems *elems, - struct ieee80211_channel *channel, - bool beacon); + struct ieee80211_channel *channel); void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3cf85d8..7d253a0 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2369,8 +2369,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status, - struct ieee802_11_elems *elems, - bool beacon) + struct ieee802_11_elems *elems) { struct ieee80211_local *local = sdata->local; int freq; @@ -2404,7 +2403,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, return; bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, - channel, beacon); + channel); if (bss) ieee80211_rx_bss_put(local, bss); @@ -2447,7 +2446,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, &elems); - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); if (ifmgd->associated && ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) @@ -2528,8 +2527,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, - false); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; ifmgd->assoc_data->sent_assoc = false; /* continue assoc process */ @@ -2682,8 +2680,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ifmgd->beacon_crc = ncrc; ifmgd->beacon_crc_valid = true; - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, - true); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); if (ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, elems.wmm_param_len)) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d59fc68..06cbe26 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -65,12 +65,11 @@ static bool is_uapsd_supported(struct ieee802_11_elems *elems) struct ieee80211_bss * ieee80211_bss_info_update(struct ieee80211_local *local, struct ieee80211_rx_status *rx_status, - struct ieee80211_mgmt *mgmt, - size_t len, + struct ieee80211_mgmt *mgmt, size_t len, struct ieee802_11_elems *elems, - struct ieee80211_channel *channel, - bool beacon) + struct ieee80211_channel *channel) { + bool beacon = ieee80211_is_beacon(mgmt->frame_control); struct cfg80211_bss *cbss; struct ieee80211_bss *bss; int clen, srlen; @@ -203,7 +202,7 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) bss = ieee80211_bss_info_update(local, rx_status, mgmt, skb->len, &elems, - channel, beacon); + channel); if (bss) ieee80211_rx_bss_put(local, bss); } -- cgit v0.10.2 From 61e8a48cc1283c8e4358b3ce06305d886c55f7ce Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 16:47:42 +0100 Subject: mac80211: clean up ieee80211_quiesce It's a bit odd that there's a return value that only depends on the iftype, move that logic out of the function into the only caller that needs it. Also, since the quiescing could stop timers that trigger the sdata work, move the sdata work cancel into the function and after the actual quiesce. Finally, there's no need to call it on interfaces that are down, so don't. Change-Id: I1632d46d21ba3558ea713d035184f1939905f2f1 Signed-off-by: Johannes Berg diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 79a48f3..f321783 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -7,25 +7,23 @@ #include "led.h" /* return value indicates whether the driver should be further notified */ -static bool ieee80211_quiesce(struct ieee80211_sub_if_data *sdata) +static void ieee80211_quiesce(struct ieee80211_sub_if_data *sdata) { switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: ieee80211_sta_quiesce(sdata); - return true; + break; case NL80211_IFTYPE_ADHOC: ieee80211_ibss_quiesce(sdata); - return true; + break; case NL80211_IFTYPE_MESH_POINT: ieee80211_mesh_quiesce(sdata); - return true; - case NL80211_IFTYPE_AP_VLAN: - case NL80211_IFTYPE_MONITOR: - /* don't tell driver about this */ - return false; + break; default: - return true; + break; } + + cancel_work_sync(&sdata->work); } int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) @@ -94,10 +92,9 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) WARN_ON(err != 1); local->wowlan = false; } else { - list_for_each_entry(sdata, &local->interfaces, list) { - cancel_work_sync(&sdata->work); - ieee80211_quiesce(sdata); - } + list_for_each_entry(sdata, &local->interfaces, list) + if (ieee80211_sdata_running(sdata)) + ieee80211_quiesce(sdata); goto suspend; } } @@ -124,13 +121,18 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { - cancel_work_sync(&sdata->work); - - if (!ieee80211_quiesce(sdata)) + if (!ieee80211_sdata_running(sdata)) continue; - if (!ieee80211_sdata_running(sdata)) + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MONITOR: + /* skip these */ continue; + default: + ieee80211_quiesce(sdata); + break; + } /* disable beaconing */ ieee80211_bss_info_change_notify(sdata, -- cgit v0.10.2 From 529ba6e9313dbe60dab7e72c6fdf647a012e9f5b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 17:16:45 +0100 Subject: mac80211: clean up association better in suspend When suspending, bss_info_changed() is called to disable beacons, but managed mode interfaces are simply removed (bss_info_changed() is called with "no change" only). This can lead to problems. To fix this and copy the BSS configuration, clear it during suspend and restore it on resume. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fa6d43e..38e7883 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -783,6 +783,11 @@ struct ieee80211_sub_if_data { struct dentry *default_mgmt_key; } debugfs; #endif + +#ifdef CONFIG_PM + struct ieee80211_bss_conf suspend_bss_conf; +#endif + /* must be last, dynamically sized area in this! */ struct ieee80211_vif vif; }; diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index f321783..712c17f 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -121,6 +121,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { + u32 changed = BSS_CHANGED_BEACON_ENABLED; + if (!ieee80211_sdata_running(sdata)) continue; @@ -129,14 +131,25 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) case NL80211_IFTYPE_MONITOR: /* skip these */ continue; + case NL80211_IFTYPE_STATION: + if (sdata->vif.bss_conf.assoc) + changed = BSS_CHANGED_ASSOC | + BSS_CHANGED_BSSID | + BSS_CHANGED_IDLE; + else + changed = 0; + /* fall through */ default: ieee80211_quiesce(sdata); break; } - /* disable beaconing */ - ieee80211_bss_info_change_notify(sdata, - BSS_CHANGED_BEACON_ENABLED); + sdata->suspend_bss_conf = sdata->vif.bss_conf; + memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf)); + sdata->vif.bss_conf.idle = true; + + /* disable beaconing or remove association */ + ieee80211_bss_info_change_notify(sdata, changed); if (sdata->vif.type == NL80211_IFTYPE_AP && rcu_access_pointer(sdata->u.ap.beacon)) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 051313f..2e2e13b 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1526,6 +1526,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) BSS_CHANGED_IDLE | BSS_CHANGED_TXPOWER; +#ifdef CONFIG_PM + if (local->resuming) + sdata->vif.bss_conf = sdata->suspend_bss_conf; +#endif + switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: changed |= BSS_CHANGED_ASSOC | -- cgit v0.10.2 From 8a61af65c6d03781015315dbc43d0942a5b31db9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 17:42:30 +0100 Subject: mac80211: fix channel context iteration During suspend/resume channel contexts might be iterated even if they haven't been re-added to the driver, keep track of this and skip them in iteration. Also use the new status for sanity checks. Also clarify the fact that during HW restart all contexts are iterated over (thanks Eliad.) Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ee50c5e..0978b0f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3754,6 +3754,11 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw, * The iterator will not find a context that's being added (during * the driver callback to add it) but will find it while it's being * removed. + * + * Note that during hardware restart, all contexts that existed + * before the restart are considered already present so will be + * found while iterating, whether they've been re-added already + * or not. */ void ieee80211_iter_chan_contexts_atomic( struct ieee80211_hw *hw, diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 80e5552..1bfe0a8 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -381,7 +381,8 @@ void ieee80211_iter_chan_contexts_atomic( rcu_read_lock(); list_for_each_entry_rcu(ctx, &local->chanctx_list, list) - iter(hw, &ctx->conf, iter_data); + if (ctx->driver_present) + iter(hw, &ctx->conf, iter_data); rcu_read_unlock(); } EXPORT_SYMBOL_GPL(ieee80211_iter_chan_contexts_atomic); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 698dc7e..608ced4 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -913,6 +913,8 @@ static inline int drv_add_chanctx(struct ieee80211_local *local, if (local->ops->add_chanctx) ret = local->ops->add_chanctx(&local->hw, &ctx->conf); trace_drv_return_int(local, ret); + if (!ret) + ctx->driver_present = true; return ret; } @@ -924,6 +926,7 @@ static inline void drv_remove_chanctx(struct ieee80211_local *local, if (local->ops->remove_chanctx) local->ops->remove_chanctx(&local->hw, &ctx->conf); trace_drv_return_void(local); + ctx->driver_present = false; } static inline void drv_change_chanctx(struct ieee80211_local *local, @@ -931,8 +934,10 @@ static inline void drv_change_chanctx(struct ieee80211_local *local, u32 changed) { trace_drv_change_chanctx(local, ctx, changed); - if (local->ops->change_chanctx) + if (local->ops->change_chanctx) { + WARN_ON_ONCE(!ctx->driver_present); local->ops->change_chanctx(&local->hw, &ctx->conf, changed); + } trace_drv_return_void(local); } @@ -945,10 +950,12 @@ static inline int drv_assign_vif_chanctx(struct ieee80211_local *local, check_sdata_in_driver(sdata); trace_drv_assign_vif_chanctx(local, sdata, ctx); - if (local->ops->assign_vif_chanctx) + if (local->ops->assign_vif_chanctx) { + WARN_ON_ONCE(!ctx->driver_present); ret = local->ops->assign_vif_chanctx(&local->hw, &sdata->vif, &ctx->conf); + } trace_drv_return_int(local, ret); return ret; @@ -961,10 +968,12 @@ static inline void drv_unassign_vif_chanctx(struct ieee80211_local *local, check_sdata_in_driver(sdata); trace_drv_unassign_vif_chanctx(local, sdata, ctx); - if (local->ops->unassign_vif_chanctx) + if (local->ops->unassign_vif_chanctx) { + WARN_ON_ONCE(!ctx->driver_present); local->ops->unassign_vif_chanctx(&local->hw, &sdata->vif, &ctx->conf); + } trace_drv_return_void(local); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 38e7883..2316118 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -685,6 +685,7 @@ struct ieee80211_chanctx { enum ieee80211_chanctx_mode mode; int refcount; + bool driver_present; struct ieee80211_chanctx_conf conf; }; -- cgit v0.10.2 From d6a83228823fc0cc8d79d95c9f0bf568b7317862 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:06:28 +0100 Subject: mac80211: track enable_beacon explicitly Instead of calculating in ieee80211_bss_info_change_notify() whether beaconing should be enabled or not, set it in the correct places in the callers. This simplifies the logic in this function at the expense of offchannel, but is also more robust. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 908f115..3e7d557 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -930,6 +930,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, sdata->vif.bss_conf.beacon_int = params->beacon_interval; sdata->vif.bss_conf.dtim_period = params->dtim_period; + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.ssid_len = params->ssid_len; if (params->ssid_len) @@ -1017,6 +1018,8 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) sta_info_flush_cleanup(vlan); sta_info_flush_cleanup(sdata); + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 2722749..b4b866f 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -191,6 +191,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, rcu_assign_pointer(ifibss->presp, skb); + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.beacon_int = beacon_int; sdata->vif.bss_conf.basic_rates = basic_rates; bss_change = BSS_CHANGED_BEACON_INT; @@ -1189,6 +1190,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) RCU_INIT_POINTER(sdata->u.ibss.presp, NULL); sdata->vif.bss_conf.ibss_joined = false; sdata->vif.bss_conf.ibss_creator = false; + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_IBSS); synchronize_rcu(); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2316118..c084c15 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -659,10 +659,13 @@ enum ieee80211_sub_if_data_flags { * change handling while the interface is up * @SDATA_STATE_OFFCHANNEL: This interface is currently in offchannel * mode, so queues are stopped + * @SDATA_STATE_OFFCHANNEL_BEACON_STOPPED: Beaconing was stopped due + * to offchannel, reset when offchannel returns */ enum ieee80211_sdata_state_bits { SDATA_STATE_RUNNING, SDATA_STATE_OFFCHANNEL, + SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, }; /** diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 0c0d4ca..71a64f4 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -245,38 +245,6 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, break; } - if (changed & BSS_CHANGED_BEACON_ENABLED) { - if (local->quiescing || !ieee80211_sdata_running(sdata) || - test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) { - sdata->vif.bss_conf.enable_beacon = false; - } else { - /* - * Beacon should be enabled, but AP mode must - * check whether there is a beacon configured. - */ - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - sdata->vif.bss_conf.enable_beacon = - !!sdata->u.ap.beacon; - break; - case NL80211_IFTYPE_ADHOC: - sdata->vif.bss_conf.enable_beacon = - !!sdata->u.ibss.presp; - break; -#ifdef CONFIG_MAC80211_MESH - case NL80211_IFTYPE_MESH_POINT: - sdata->vif.bss_conf.enable_beacon = - !!sdata->u.mesh.mesh_id_len; - break; -#endif - default: - /* not reached */ - WARN_ON(1); - break; - } - } - } - drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index c0008d5..fcfa7ef9 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -626,6 +626,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.ht_operation_mode = ifmsh->mshcfg.ht_opmode; sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); @@ -648,6 +649,8 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) /* stop the beacon */ ifmsh->mesh_id_len = 0; + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); /* flush STAs and mpaths on this iface */ diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index a5379ae..1430b48 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -126,11 +126,13 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); /* Check to see if we should disable beaconing. */ - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_ADHOC || - sdata->vif.type == NL80211_IFTYPE_MESH_POINT) + if (sdata->vif.bss_conf.enable_beacon) { + set_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, + &sdata->state); + sdata->vif.bss_conf.enable_beacon = false; ieee80211_bss_info_change_notify( sdata, BSS_CHANGED_BEACON_ENABLED); + } if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { netif_tx_stop_all_queues(sdata->dev); @@ -183,11 +185,12 @@ void ieee80211_offchannel_return(struct ieee80211_local *local, netif_tx_wake_all_queues(sdata->dev); } - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_ADHOC || - sdata->vif.type == NL80211_IFTYPE_MESH_POINT) + if (test_and_clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, + &sdata->state)) { + sdata->vif.bss_conf.enable_beacon = true; ieee80211_bss_info_change_notify( sdata, BSS_CHANGED_BEACON_ENABLED); + } } mutex_unlock(&local->iflist_mtx); } -- cgit v0.10.2 From 8da349329ae52462253052f804ef30d086c9911a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:17:26 +0100 Subject: mac80211: reconfig bss_info_changed only if beaconing For AP/IBSS/mesh interfaces, call the driver to reconfigure bss_info_changed only if the interface was beaconing before suspend, otherwise we call the driver and it might interpret the change as going from enabled to disabled. Signed-off-by: Johannes Berg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 2e2e13b..e27c89c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1555,9 +1555,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* fall through */ case NL80211_IFTYPE_MESH_POINT: - changed |= BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED; - ieee80211_bss_info_change_notify(sdata, changed); + if (sdata->vif.bss_conf.enable_beacon) { + changed |= BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED; + ieee80211_bss_info_change_notify(sdata, changed); + } break; case NL80211_IFTYPE_WDS: break; -- cgit v0.10.2 From b8dc1a35c88dddcf62ce7bc59a7ed4c38c2f7597 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:22:10 +0100 Subject: mac80211: further simplify ieee80211_bss_info_change_notify The special case in the function isn't really needed, instead make the suspend code a bit better and also easier to understand and move the warning into the driver op wrapper inline. Signed-off-by: Johannes Berg diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 608ced4..cccc486 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -207,6 +207,12 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, { might_sleep(); + WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED) && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT); + check_sdata_in_driver(sdata); trace_drv_bss_info_changed(local, sdata, info, changed); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 71a64f4..b719a16 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -231,20 +231,6 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, return; } - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_WDS: - case NL80211_IFTYPE_MESH_POINT: - break; - default: - /* do not warn to simplify caller in scan.c */ - changed &= ~BSS_CHANGED_BEACON_ENABLED; - if (WARN_ON(changed & BSS_CHANGED_BEACON)) - return; - break; - } - drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 712c17f..8a67d7e 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -121,7 +121,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { - u32 changed = BSS_CHANGED_BEACON_ENABLED; + u32 changed = 0; if (!ieee80211_sdata_running(sdata)) continue; @@ -136,14 +136,19 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) changed = BSS_CHANGED_ASSOC | BSS_CHANGED_BSSID | BSS_CHANGED_IDLE; - else - changed = 0; - /* fall through */ + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + if (sdata->vif.bss_conf.enable_beacon) + changed = BSS_CHANGED_BEACON_ENABLED; + break; default: - ieee80211_quiesce(sdata); break; } + ieee80211_quiesce(sdata); + sdata->suspend_bss_conf = sdata->vif.bss_conf; memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf)); sdata->vif.bss_conf.idle = true; -- cgit v0.10.2 From ad2d223aa900179031feb40273881e212941573d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:34:25 +0100 Subject: mac80211: assign bss_conf.bssid only once Instead of checking every time bss_info_changed is called, assign the pointer once depending on the interface type and then leave it untouched until the interface type is changed. This makes the ieee80211_bss_info_change_notify() now a simple wrapper to call the driver only. Signed-off-by: Johannes Berg diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index cccc486..0c07f94 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -212,6 +212,8 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, sdata->vif.type != NL80211_IFTYPE_AP && sdata->vif.type != NL80211_IFTYPE_ADHOC && sdata->vif.type != NL80211_IFTYPE_MESH_POINT); + WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE && + changed & ~BSS_CHANGED_IDLE); check_sdata_in_driver(sdata); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 1ab7d8e..06fac29 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1227,6 +1227,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, case NL80211_IFTYPE_AP: skb_queue_head_init(&sdata->u.ap.ps.bc_buf); INIT_LIST_HEAD(&sdata->u.ap.vlans); + sdata->vif.bss_conf.bssid = sdata->vif.addr; break; case NL80211_IFTYPE_P2P_CLIENT: type = NL80211_IFTYPE_STATION; @@ -1234,9 +1235,11 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, sdata->vif.p2p = true; /* fall through */ case NL80211_IFTYPE_STATION: + sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid; ieee80211_sta_setup_sdata(sdata); break; case NL80211_IFTYPE_ADHOC: + sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; ieee80211_ibss_setup_sdata(sdata); break; case NL80211_IFTYPE_MESH_POINT: @@ -1250,8 +1253,12 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, MONITOR_FLAG_OTHER_BSS; break; case NL80211_IFTYPE_WDS: + sdata->vif.bss_conf.bssid = NULL; + break; case NL80211_IFTYPE_AP_VLAN: + break; case NL80211_IFTYPE_P2P_DEVICE: + sdata->vif.bss_conf.bssid = sdata->vif.addr; break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: diff --git a/net/mac80211/main.c b/net/mac80211/main.c index b719a16..e6514f2 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -207,30 +207,10 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, u32 changed) { struct ieee80211_local *local = sdata->local; - static const u8 zero[ETH_ALEN] = { 0 }; if (!changed) return; - if (sdata->vif.type == NL80211_IFTYPE_STATION) { - sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid; - } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) - sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; - else if (sdata->vif.type == NL80211_IFTYPE_AP) - sdata->vif.bss_conf.bssid = sdata->vif.addr; - else if (sdata->vif.type == NL80211_IFTYPE_WDS) - sdata->vif.bss_conf.bssid = NULL; - else if (ieee80211_vif_is_mesh(&sdata->vif)) { - sdata->vif.bss_conf.bssid = zero; - } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { - sdata->vif.bss_conf.bssid = sdata->vif.addr; - WARN_ONCE(changed & ~(BSS_CHANGED_IDLE), - "P2P Device BSS changed %#x", changed); - } else { - WARN_ON(1); - return; - } - drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index fcfa7ef9..2458858 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -810,6 +810,7 @@ void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + static u8 zero_addr[ETH_ALEN] = {}; setup_timer(&ifmsh->housekeeping_timer, ieee80211_mesh_housekeeping_timer, @@ -835,4 +836,6 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) INIT_LIST_HEAD(&ifmsh->preq_queue.list); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); + + sdata->vif.bss_conf.bssid = zero_addr; } diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 8a67d7e..f81fd30 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -121,6 +121,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { + static u8 zero_addr[ETH_ALEN] = {}; u32 changed = 0; if (!ieee80211_sdata_running(sdata)) @@ -152,6 +153,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) sdata->suspend_bss_conf = sdata->vif.bss_conf; memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf)); sdata->vif.bss_conf.idle = true; + if (sdata->suspend_bss_conf.bssid) + sdata->vif.bss_conf.bssid = zero_addr; /* disable beaconing or remove association */ ieee80211_bss_info_change_notify(sdata, changed); -- cgit v0.10.2 From 3ebfa6e76beab01e644e1facd5fdb84d4274043e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 19 Dec 2012 10:53:02 -0800 Subject: cfg80211: do not process beacon hints if one is already queued Regulatory beacon hints are used to help with world roaming and as it is right now we learn from a beacon hint processed on one wiphy to all other wiphys. The processing of beacon hints however is scheduled and if we have a lot of interfaces we may hit the case that we'll queue a the same beacon hint many times until its processed. To avoid this do a lookup on the queued up beacon hints prior to adding a new beacon hint. If the beacon hint is removed from the pending reg beacon hint list then it would be processed and we'd ensure all wiphys would have learned from it, if its on the pending reg beacon list we'd now find it prior to it being processed. Tested-by: Ben Greear Reported-by: Ben Greear Reported-by: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index fd53d97..2a3ae4d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1925,11 +1925,23 @@ static bool freq_is_chan_12_13_14(u16 freq) return false; } +static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan) +{ + struct reg_beacon *pending_beacon; + + list_for_each_entry(pending_beacon, ®_pending_beacons, list) + if (beacon_chan->center_freq == + pending_beacon->chan.center_freq) + return true; + return false; +} + int regulatory_hint_found_beacon(struct wiphy *wiphy, struct ieee80211_channel *beacon_chan, gfp_t gfp) { struct reg_beacon *reg_beacon; + bool processing; if (beacon_chan->beacon_found || beacon_chan->flags & IEEE80211_CHAN_RADAR || @@ -1937,6 +1949,13 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy, !freq_is_chan_12_13_14(beacon_chan->center_freq))) return 0; + spin_lock_bh(®_pending_beacons_lock); + processing = pending_reg_beacon(beacon_chan); + spin_unlock_bh(®_pending_beacons_lock); + + if (processing) + return 0; + reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); if (!reg_beacon) return -ENOMEM; -- cgit v0.10.2 From 3195e489a878aaa3b735d4a1b7c5c79b3786efed Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 19 Dec 2012 10:53:03 -0800 Subject: cfg80211: move reg_is_world_roaming() This will be used later by other code. This has no functional change. Tested-by: Ben Greear Reported-by: Ben Greear Reported-by: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2a3ae4d..b68eeef 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1009,6 +1009,22 @@ static bool ignore_reg_update(struct wiphy *wiphy, return false; } +static bool reg_is_world_roaming(struct wiphy *wiphy) +{ + const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); + const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); + struct regulatory_request *lr = get_last_request(); + + if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) + return true; + + if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) + return true; + + return false; +} + static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, struct reg_beacon *reg_beacon) { @@ -1085,22 +1101,6 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) } } -static bool reg_is_world_roaming(struct wiphy *wiphy) -{ - const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); - const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); - struct regulatory_request *lr = get_last_request(); - - if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) - return true; - - if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) - return true; - - return false; -} - /* Reap the advantages of previously found beacons */ static void reg_process_beacons(struct wiphy *wiphy) { -- cgit v0.10.2 From 0f500a5f6cadac888d5d3fce326452372d1a8343 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 19 Dec 2012 10:53:04 -0800 Subject: cfg80211: move world roaming check for beacon hints We should not add new beacon hints even if the wiphy is not world roaming. Without this we were always adding a beacon hint if not world roaming for every non world roaming wiphy interface. Tested-by: Ben Greear Reported-by: Ben Greear Reported-by: Johannes Berg Signed-off-by: Luis R. Rodriguez [fix locking] Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b68eeef..0b35de0 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1044,6 +1044,9 @@ static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, chan->beacon_found = true; + if (!reg_is_world_roaming(wiphy)) + return; + if (wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS) return; @@ -1110,8 +1113,6 @@ static void reg_process_beacons(struct wiphy *wiphy) */ if (!last_request) return; - if (!reg_is_world_roaming(wiphy)) - return; wiphy_update_beacon_reg(wiphy); } @@ -1593,11 +1594,8 @@ static void reg_process_pending_beacon_hints(void) struct cfg80211_registered_device *rdev; struct reg_beacon *pending_beacon, *tmp; - /* - * No need to hold the reg_mutex here as we just touch wiphys - * and do not read or access regulatory variables. - */ mutex_lock(&cfg80211_mutex); + mutex_lock(®_mutex); /* This goes through the _pending_ beacon list */ spin_lock_bh(®_pending_beacons_lock); @@ -1615,6 +1613,7 @@ static void reg_process_pending_beacon_hints(void) } spin_unlock_bh(®_pending_beacons_lock); + mutex_unlock(®_mutex); mutex_unlock(&cfg80211_mutex); } -- cgit v0.10.2 From b08fbbd8ade1fe3eea821a65b98d9f6a828329da Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 7 Dec 2012 13:06:48 +0100 Subject: mac80211: restrict assoc request VHT capabilities In interoperability testing some APs showed bad behaviour if some of the VHT capabilities of the station are better than their own. Restrict the assoc request parameters - beamformee capabable, - RX STBC and - RX MCS set to the subset that the AP can support. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c084c15..7182907 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -405,6 +405,8 @@ struct ieee80211_mgd_assoc_data { u8 ap_ht_param; + struct ieee80211_vht_cap ap_vht_cap; + size_t ie_len; u8 ie[]; }; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7d253a0..6ffbf70 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -341,11 +341,13 @@ static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, - struct ieee80211_supported_band *sband) + struct ieee80211_supported_band *sband, + struct ieee80211_vht_cap *ap_vht_cap) { u8 *pos; u32 cap; struct ieee80211_sta_vht_cap vht_cap; + int i; BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); @@ -364,6 +366,42 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; } + /* + * Some APs apparently get confused if our capabilities are better + * than theirs, so restrict what we advertise in the assoc request. + */ + if (!(ap_vht_cap->vht_cap_info & + cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) + cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; + + if (!(ap_vht_cap->vht_cap_info & + cpu_to_le32(IEEE80211_VHT_CAP_TXSTBC))) + cap &= ~(IEEE80211_VHT_CAP_RXSTBC_1 | + IEEE80211_VHT_CAP_RXSTBC_3 | + IEEE80211_VHT_CAP_RXSTBC_4); + + for (i = 0; i < 8; i++) { + int shift = i * 2; + u16 mask = IEEE80211_VHT_MCS_NOT_SUPPORTED << shift; + u16 ap_mcs, our_mcs; + + ap_mcs = (le16_to_cpu(ap_vht_cap->supp_mcs.tx_mcs_map) & + mask) >> shift; + our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) & + mask) >> shift; + + switch (ap_mcs) { + default: + if (our_mcs <= ap_mcs) + break; + /* fall through */ + case IEEE80211_VHT_MCS_NOT_SUPPORTED: + vht_cap.vht_mcs.rx_mcs_map &= cpu_to_le16(~mask); + vht_cap.vht_mcs.rx_mcs_map |= + cpu_to_le16(ap_mcs << shift); + } + } + /* reserve and fill IE */ pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); @@ -562,7 +600,8 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) sband, chan, sdata->smps_mode); if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) - ieee80211_add_vht_ie(sdata, skb, sband); + ieee80211_add_vht_ie(sdata, skb, sband, + &assoc_data->ap_vht_cap); /* if present, add any custom non-vendor IEs that go after HT */ if (assoc_data->ie_len && assoc_data->ie) { @@ -3753,7 +3792,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_bss *bss = (void *)req->bss->priv; struct ieee80211_mgd_assoc_data *assoc_data; struct ieee80211_supported_band *sband; - const u8 *ssidie, *ht_ie; + const u8 *ssidie, *ht_ie, *vht_ie; int i, err; assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); @@ -3872,6 +3911,12 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param; else ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY); + if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) + memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, + sizeof(struct ieee80211_vht_cap)); + else + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; rcu_read_unlock(); if (bss->wmm_used && bss->uapsd_supported && -- cgit v0.10.2 From dfa674da1807bc8fb782fc38a7d48c8ea3168eb7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 20 Dec 2012 18:23:01 +0100 Subject: cfg80211: move some AP code to right file Some AP code ended up in mlme.c as ap.c didn't exist when it was written, move it now. Signed-off-by: Johannes Berg diff --git a/net/wireless/ap.c b/net/wireless/ap.c index 324e8d8..a4a14e8 100644 --- a/net/wireless/ap.c +++ b/net/wireless/ap.c @@ -46,3 +46,65 @@ int cfg80211_stop_ap(struct cfg80211_registered_device *rdev, return err; } + +void cfg80211_ch_switch_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + trace_cfg80211_ch_switch_notify(dev, chandef); + + wdev_lock(wdev); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && + wdev->iftype != NL80211_IFTYPE_P2P_GO)) + goto out; + + wdev->channel = chandef->chan; + nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL); +out: + wdev_unlock(wdev); + return; +} +EXPORT_SYMBOL(cfg80211_ch_switch_notify); + +bool cfg80211_rx_spurious_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + bool ret; + + trace_cfg80211_rx_spurious_frame(dev, addr); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && + wdev->iftype != NL80211_IFTYPE_P2P_GO)) { + trace_cfg80211_return_bool(false); + return false; + } + ret = nl80211_unexpected_frame(dev, addr, gfp); + trace_cfg80211_return_bool(ret); + return ret; +} +EXPORT_SYMBOL(cfg80211_rx_spurious_frame); + +bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + bool ret; + + trace_cfg80211_rx_unexpected_4addr_frame(dev, addr); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && + wdev->iftype != NL80211_IFTYPE_P2P_GO && + wdev->iftype != NL80211_IFTYPE_AP_VLAN)) { + trace_cfg80211_return_bool(false); + return false; + } + ret = nl80211_unexpected_4addr_frame(dev, addr, gfp); + trace_cfg80211_return_bool(ret); + return ret; +} +EXPORT_SYMBOL(cfg80211_rx_unexpected_4addr_frame); diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 5e8123e..461e692 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -987,65 +987,3 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, nl80211_pmksa_candidate_notify(rdev, dev, index, bssid, preauth, gfp); } EXPORT_SYMBOL(cfg80211_pmksa_candidate_notify); - -void cfg80211_ch_switch_notify(struct net_device *dev, - struct cfg80211_chan_def *chandef) -{ - struct wireless_dev *wdev = dev->ieee80211_ptr; - struct wiphy *wiphy = wdev->wiphy; - struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); - - trace_cfg80211_ch_switch_notify(dev, chandef); - - wdev_lock(wdev); - - if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO)) - goto out; - - wdev->channel = chandef->chan; - nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL); -out: - wdev_unlock(wdev); - return; -} -EXPORT_SYMBOL(cfg80211_ch_switch_notify); - -bool cfg80211_rx_spurious_frame(struct net_device *dev, - const u8 *addr, gfp_t gfp) -{ - struct wireless_dev *wdev = dev->ieee80211_ptr; - bool ret; - - trace_cfg80211_rx_spurious_frame(dev, addr); - - if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO)) { - trace_cfg80211_return_bool(false); - return false; - } - ret = nl80211_unexpected_frame(dev, addr, gfp); - trace_cfg80211_return_bool(ret); - return ret; -} -EXPORT_SYMBOL(cfg80211_rx_spurious_frame); - -bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, - const u8 *addr, gfp_t gfp) -{ - struct wireless_dev *wdev = dev->ieee80211_ptr; - bool ret; - - trace_cfg80211_rx_unexpected_4addr_frame(dev, addr); - - if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO && - wdev->iftype != NL80211_IFTYPE_AP_VLAN)) { - trace_cfg80211_return_bool(false); - return false; - } - ret = nl80211_unexpected_4addr_frame(dev, addr, gfp); - trace_cfg80211_return_bool(ret); - return ret; -} -EXPORT_SYMBOL(cfg80211_rx_unexpected_4addr_frame); -- cgit v0.10.2 From d582cffbcd04eae0bd8a83b05648bfd54bfd21c9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 17:53:44 +0200 Subject: nl80211/mac80211: support full station state in AP mode Today, stations are added already associated. That is inefficient if, for example, the driver has no room for stations any more because then the station will go through the entire auth/assoc handshake, only to be kicked out afterwards. To address this a bit better, at least with drivers using the new station state callback, allow hostapd to add stations in unauthenticated mode, just after receiving the AUTH frame, before even replying. Thus if there's no more space at that point, it can send a negative auth frame back. It still needs to handle later state transition errors though, of course. Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e3e19f8..5470171 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1697,6 +1697,9 @@ enum nl80211_iftype { * flag can't be changed, it is only valid while adding a station, and * attempts to change it will silently be ignored (rather than rejected * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1708,6 +1711,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -3140,6 +3144,17 @@ enum nl80211_ap_sme_features { * setting * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3155,6 +3170,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 3e7d557..f4d12c7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -510,6 +510,7 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) BIT(NL80211_STA_FLAG_WME) | BIT(NL80211_STA_FLAG_MFP) | BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED) | BIT(NL80211_STA_FLAG_TDLS_PEER); if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED); @@ -521,6 +522,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP); if (test_sta_flag(sta, WLAN_STA_AUTH)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); + if (test_sta_flag(sta, WLAN_STA_ASSOC)) + sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED); if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); } @@ -1077,6 +1080,58 @@ static void ieee80211_send_layer2_update(struct sta_info *sta) netif_rx_ni(skb); } +static int sta_apply_auth_flags(struct ieee80211_local *local, + struct sta_info *sta, + u32 mask, u32 set) +{ + int ret; + + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + !test_sta_flag(sta, WLAN_STA_AUTH)) { + ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && + set & BIT(NL80211_STA_FLAG_ASSOCIATED) && + !test_sta_flag(sta, WLAN_STA_ASSOC)) { + ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { + if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) + ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); + else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) + ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + else + ret = 0; + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && + !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) && + test_sta_flag(sta, WLAN_STA_ASSOC)) { + ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && + test_sta_flag(sta, WLAN_STA_AUTH)) { + ret = sta_info_move_state(sta, IEEE80211_STA_NONE); + if (ret) + return ret; + } + + return 0; +} + static int sta_apply_parameters(struct ieee80211_local *local, struct sta_info *sta, struct station_parameters *params) @@ -1094,52 +1149,20 @@ static int sta_apply_parameters(struct ieee80211_local *local, mask = params->sta_flags_mask; set = params->sta_flags_set; - /* - * In mesh mode, we can clear AUTHENTICATED flag but must - * also make ASSOCIATED follow appropriately for the driver - * API. See also below, after AUTHORIZED changes. - */ - if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) { - /* cfg80211 should not allow this in non-mesh modes */ - if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif))) - return -EINVAL; - - if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && - !test_sta_flag(sta, WLAN_STA_AUTH)) { - ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (ret) - return ret; - ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); - if (ret) - return ret; - } - } - - if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { - if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) - ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); - else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) - ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); - if (ret) - return ret; - } - - if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) { - /* cfg80211 should not allow this in non-mesh modes */ - if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif))) - return -EINVAL; - - if (!(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && - test_sta_flag(sta, WLAN_STA_AUTH)) { - ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (ret) - return ret; - ret = sta_info_move_state(sta, IEEE80211_STA_NONE); - if (ret) - return ret; - } + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* + * In mesh mode, ASSOCIATED isn't part of the nl80211 + * API but must follow AUTHENTICATED for driver state. + */ + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) + mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); + if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) + set |= BIT(NL80211_STA_FLAG_ASSOCIATED); } + ret = sta_apply_auth_flags(local, sta, mask, set); + if (ret) + return ret; if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) { if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) @@ -1273,6 +1296,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, if (!sta) return -ENOMEM; + /* + * defaults -- if userspace wants something else we'll + * change it accordingly in sta_apply_parameters() + */ sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e6514f2..39cfe8f 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -541,7 +541,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | NL80211_FEATURE_SAE | NL80211_FEATURE_HT_IBSS | - NL80211_FEATURE_VIF_TXPOWER; + NL80211_FEATURE_VIF_TXPOWER | + NL80211_FEATURE_FULL_AP_CLIENT_STATE; if (!ops->hw_scan) wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b3cf7cc..087f68b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3231,11 +3231,21 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* accept only the listed bits */ if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) | + BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED) | BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) | BIT(NL80211_STA_FLAG_WME) | BIT(NL80211_STA_FLAG_MFP))) return -EINVAL; + /* but authenticated/associated only if driver handles it */ + if (!(rdev->wiphy.features & + NL80211_FEATURE_FULL_AP_CLIENT_STATE) && + params.sta_flags_mask & + (BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED))) + return -EINVAL; + /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); if (IS_ERR(params.vlan)) @@ -3393,17 +3403,31 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) /* but don't bother the driver with it */ params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); + /* allow authenticated/associated only if driver handles it */ + if (!(rdev->wiphy.features & + NL80211_FEATURE_FULL_AP_CLIENT_STATE) && + params.sta_flags_mask & + (BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED))) + return -EINVAL; + /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); if (IS_ERR(params.vlan)) return PTR_ERR(params.vlan); break; case NL80211_IFTYPE_MESH_POINT: + /* associated is disallowed */ + if (params.sta_flags_mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) + return -EINVAL; /* TDLS peers cannot be added */ if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) return -EINVAL; break; case NL80211_IFTYPE_STATION: + /* associated is disallowed */ + if (params.sta_flags_mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) + return -EINVAL; /* Only TDLS peers can be added */ if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) return -EINVAL; -- cgit v0.10.2 From c82c4a80bbb9c8ffa1d783070a8caa37f2db45b6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 13:31:31 +0200 Subject: mac80211: split aggregation stop by reason The initiator/tx doesn't really identify why an aggregation session is stopped, give a reason for stopping that more clearly identifies what's going on. This will help tell the driver clearly what is expected of it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index eb9df22..e0656d7 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -150,8 +150,7 @@ void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, } int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx) + enum ieee80211_agg_stop_reason reason) { struct ieee80211_local *local = sta->local; struct tid_ampdu_tx *tid_tx; @@ -212,8 +211,10 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ synchronize_net(); - tid_tx->stop_initiator = initiator; - tid_tx->tx_stop = tx; + tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ? + WLAN_BACK_RECIPIENT : + WLAN_BACK_INITIATOR; + tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST; ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_TX_STOP, @@ -660,14 +661,13 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx) + enum ieee80211_agg_stop_reason reason) { int ret; mutex_lock(&sta->ampdu_mlme.mtx); - ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator, tx); + ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason); mutex_unlock(&sta->ampdu_mlme.mtx); @@ -868,8 +868,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, } } else { - ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR, - false); + ___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED); } out: diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 8a6d68f..df46cd8 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -182,16 +182,19 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, ieee80211_apply_htcap_overrides(sdata, ht_cap); } -void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, bool tx) +void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, + enum ieee80211_agg_stop_reason reason) { int i; cancel_work_sync(&sta->ampdu_mlme.work); for (i = 0; i < IEEE80211_NUM_TIDS; i++) { - __ieee80211_stop_tx_ba_session(sta, i, WLAN_BACK_INITIATOR, tx); + __ieee80211_stop_tx_ba_session(sta, i, reason); __ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT, - WLAN_REASON_QSTA_LEAVE_QBSS, tx); + WLAN_REASON_QSTA_LEAVE_QBSS, + reason != AGG_STOP_DESTROY_STA && + reason != AGG_STOP_PEER_REQUEST); } } @@ -248,8 +251,7 @@ void ieee80211_ba_session_work(struct work_struct *work) if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state)) ___ieee80211_stop_tx_ba_session(sta, tid, - WLAN_BACK_INITIATOR, - true); + AGG_STOP_LOCAL_REQUEST); } mutex_unlock(&sta->ampdu_mlme.mtx); } @@ -317,8 +319,7 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, __ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0, true); else - __ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_RECIPIENT, - true); + __ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_PEER_REQUEST); } int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 7182907..0fa44a9 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1432,7 +1432,8 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, u16 initiator, u16 reason, bool stop); void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, u16 initiator, u16 reason, bool stop); -void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, bool tx); +void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, + enum ieee80211_agg_stop_reason reason); void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_mgmt *mgmt, size_t len); @@ -1446,11 +1447,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, size_t len); int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx); + enum ieee80211_agg_stop_reason reason); int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx); + enum ieee80211_agg_stop_reason reason); void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid); void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid); void ieee80211_ba_session_work(struct work_struct *work); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6ffbf70..d90c07b1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1525,7 +1525,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, sta = sta_info_get(sdata, ifmgd->bssid); if (sta) { set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, false); + ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); } mutex_unlock(&local->sta_mtx); diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index f81fd30..e45b836 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -42,7 +42,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, true); + ieee80211_sta_tear_down_BA_sessions( + sta, AGG_STOP_LOCAL_REQUEST); } mutex_unlock(&local->sta_mtx); } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 738f934..9d864ed 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -784,7 +784,7 @@ int __must_check __sta_info_destroy(struct sta_info *sta) * will be sufficient. */ set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, false); + ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); ret = sta_info_hash_del(local, sta); if (ret) diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 031e4a5..af7d78a 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -92,6 +92,13 @@ enum ieee80211_sta_info_flags { #define HT_AGG_STATE_WANT_START 4 #define HT_AGG_STATE_WANT_STOP 5 +enum ieee80211_agg_stop_reason { + AGG_STOP_DECLINED, + AGG_STOP_LOCAL_REQUEST, + AGG_STOP_PEER_REQUEST, + AGG_STOP_DESTROY_STA, +}; + /** * struct tid_ampdu_tx - TID aggregation information (Tx). * diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e27c89c..1b94207 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1639,7 +1639,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { - ieee80211_sta_tear_down_BA_sessions(sta, true); + ieee80211_sta_tear_down_BA_sessions( + sta, AGG_STOP_LOCAL_REQUEST); clear_sta_flag(sta, WLAN_STA_BLOCK_BA); } -- cgit v0.10.2 From faec12ee2dd92edc09f75aab3d8c5085102052c5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 14:12:44 +0200 Subject: mac80211: split out aggregation TX removal Create the function ieee80211_remove_tid_tx to call it from ___ieee80211_stop_tx_ba_session later. Signed-off-by: Johannes Berg diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index e0656d7..101bbfb 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -713,6 +713,35 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) } EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); +static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) +{ + struct tid_ampdu_tx *tid_tx; + + lockdep_assert_held(&sta->ampdu_mlme.mtx); + lockdep_assert_held(&sta->lock); + + tid_tx = rcu_dereference_protected_tid_tx(sta, tid); + + /* + * When we get here, the TX path will not be lockless any more wrt. + * aggregation, since the OPERATIONAL bit has long been cleared. + * Thus it will block on getting the lock, if it occurs. So if we + * stop the queue now, we will not get any more packets, and any + * that might be being processed will wait for us here, thereby + * guaranteeing that no packets go to the tid_tx pending queue any + * more. + */ + + ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); + + /* future packets must not find the tid_tx struct any more */ + ieee80211_assign_tid_tx(sta, tid, NULL); + + ieee80211_agg_splice_finish(sta->sdata, tid); + + kfree_rcu(tid_tx, rcu_head); +} + void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); @@ -751,24 +780,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) ieee80211_send_delba(sta->sdata, ra, tid, WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); - /* - * When we get here, the TX path will not be lockless any more wrt. - * aggregation, since the OPERATIONAL bit has long been cleared. - * Thus it will block on getting the lock, if it occurs. So if we - * stop the queue now, we will not get any more packets, and any - * that might be being processed will wait for us here, thereby - * guaranteeing that no packets go to the tid_tx pending queue any - * more. - */ - - ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); - - /* future packets must not find the tid_tx struct any more */ - ieee80211_assign_tid_tx(sta, tid, NULL); - - ieee80211_agg_splice_finish(sta->sdata, tid); - - kfree_rcu(tid_tx, rcu_head); + ieee80211_remove_tid_tx(sta, tid); unlock_sta: spin_unlock_bh(&sta->lock); -- cgit v0.10.2 From 30bf5f1f433c7612857ed13c50525945c483dfe0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 09:43:03 +0100 Subject: mac80211: move ieee80211_remove_tid_tx function To call it from ___ieee80211_stop_tx_ba_session, move the function and dependencies up. Signed-off-by: Johannes Berg diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 101bbfb..dda8d7d 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -149,6 +149,109 @@ void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx); } +static inline int ieee80211_ac_from_tid(int tid) +{ + return ieee802_1d_to_ac[tid & 7]; +} + +/* + * When multiple aggregation sessions on multiple stations + * are being created/destroyed simultaneously, we need to + * refcount the global queue stop caused by that in order + * to not get into a situation where one of the aggregation + * setup or teardown re-enables queues before the other is + * ready to handle that. + * + * These two functions take care of this issue by keeping + * a global "agg_queue_stop" refcount. + */ +static void __acquires(agg_queue) +ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) +{ + int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; + + if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1) + ieee80211_stop_queue_by_reason( + &sdata->local->hw, queue, + IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + __acquire(agg_queue); +} + +static void __releases(agg_queue) +ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) +{ + int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; + + if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0) + ieee80211_wake_queue_by_reason( + &sdata->local->hw, queue, + IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + __release(agg_queue); +} + +/* + * splice packets from the STA's pending to the local pending, + * requires a call to ieee80211_agg_splice_finish later + */ +static void __acquires(agg_queue) +ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata, + struct tid_ampdu_tx *tid_tx, u16 tid) +{ + struct ieee80211_local *local = sdata->local; + int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; + unsigned long flags; + + ieee80211_stop_queue_agg(sdata, tid); + + if (WARN(!tid_tx, + "TID %d gone but expected when splicing aggregates from the pending queue\n", + tid)) + return; + + if (!skb_queue_empty(&tid_tx->pending)) { + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + /* copy over remaining packets */ + skb_queue_splice_tail_init(&tid_tx->pending, + &local->pending[queue]); + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); + } +} + +static void __releases(agg_queue) +ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid) +{ + ieee80211_wake_queue_agg(sdata, tid); +} + +static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) +{ + struct tid_ampdu_tx *tid_tx; + + lockdep_assert_held(&sta->ampdu_mlme.mtx); + lockdep_assert_held(&sta->lock); + + tid_tx = rcu_dereference_protected_tid_tx(sta, tid); + + /* + * When we get here, the TX path will not be lockless any more wrt. + * aggregation, since the OPERATIONAL bit has long been cleared. + * Thus it will block on getting the lock, if it occurs. So if we + * stop the queue now, we will not get any more packets, and any + * that might be being processed will wait for us here, thereby + * guaranteeing that no packets go to the tid_tx pending queue any + * more. + */ + + ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); + + /* future packets must not find the tid_tx struct any more */ + ieee80211_assign_tid_tx(sta, tid, NULL); + + ieee80211_agg_splice_finish(sta->sdata, tid); + + kfree_rcu(tid_tx, rcu_head); +} + int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_agg_stop_reason reason) { @@ -265,80 +368,6 @@ static void sta_addba_resp_timer_expired(unsigned long data) rcu_read_unlock(); } -static inline int ieee80211_ac_from_tid(int tid) -{ - return ieee802_1d_to_ac[tid & 7]; -} - -/* - * When multiple aggregation sessions on multiple stations - * are being created/destroyed simultaneously, we need to - * refcount the global queue stop caused by that in order - * to not get into a situation where one of the aggregation - * setup or teardown re-enables queues before the other is - * ready to handle that. - * - * These two functions take care of this issue by keeping - * a global "agg_queue_stop" refcount. - */ -static void __acquires(agg_queue) -ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) -{ - int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; - - if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1) - ieee80211_stop_queue_by_reason( - &sdata->local->hw, queue, - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - __acquire(agg_queue); -} - -static void __releases(agg_queue) -ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) -{ - int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; - - if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0) - ieee80211_wake_queue_by_reason( - &sdata->local->hw, queue, - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - __release(agg_queue); -} - -/* - * splice packets from the STA's pending to the local pending, - * requires a call to ieee80211_agg_splice_finish later - */ -static void __acquires(agg_queue) -ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata, - struct tid_ampdu_tx *tid_tx, u16 tid) -{ - struct ieee80211_local *local = sdata->local; - int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; - unsigned long flags; - - ieee80211_stop_queue_agg(sdata, tid); - - if (WARN(!tid_tx, - "TID %d gone but expected when splicing aggregates from the pending queue\n", - tid)) - return; - - if (!skb_queue_empty(&tid_tx->pending)) { - spin_lock_irqsave(&local->queue_stop_reason_lock, flags); - /* copy over remaining packets */ - skb_queue_splice_tail_init(&tid_tx->pending, - &local->pending[queue]); - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - } -} - -static void __releases(agg_queue) -ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid) -{ - ieee80211_wake_queue_agg(sdata, tid); -} - void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) { struct tid_ampdu_tx *tid_tx; @@ -713,35 +742,6 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) } EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); -static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) -{ - struct tid_ampdu_tx *tid_tx; - - lockdep_assert_held(&sta->ampdu_mlme.mtx); - lockdep_assert_held(&sta->lock); - - tid_tx = rcu_dereference_protected_tid_tx(sta, tid); - - /* - * When we get here, the TX path will not be lockless any more wrt. - * aggregation, since the OPERATIONAL bit has long been cleared. - * Thus it will block on getting the lock, if it occurs. So if we - * stop the queue now, we will not get any more packets, and any - * that might be being processed will wait for us here, thereby - * guaranteeing that no packets go to the tid_tx pending queue any - * more. - */ - - ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); - - /* future packets must not find the tid_tx struct any more */ - ieee80211_assign_tid_tx(sta, tid, NULL); - - ieee80211_agg_splice_finish(sta->sdata, tid); - - kfree_rcu(tid_tx, rcu_head); -} - void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); -- cgit v0.10.2 From 18b559d5db47c86b10c14590aa2d26c0243c39e4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 13:51:25 +0200 Subject: mac80211: split TX aggregation stop action When TX aggregation is stopped, there are a few different cases: - connection with the peer was dropped - session stop was requested locally - session stop was requested by the peer - connection was dropped while a session is stopping The behaviour in these cases should be different, if the connection is dropped then the driver should drop all frames, otherwise the frames may continue to be transmitted, aggregated in the case of a locally requested session stop or unaggregated in the case of the peer requesting session stop. Split these different cases so that the driver can act accordingly; however, treat local and remote stop the same way and ask the driver to not send frames as aggregated packets any more. In the case of connection drop, the stop callback the driver is otherwise supposed to call is no longer required. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 9c07a8f..a8016d7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1628,7 +1628,9 @@ static int ath9k_htc_ampdu_action(struct ieee80211_hw *hw, if (!ret) ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ath9k_htc_tx_aggr_oper(priv, vif, sta, action, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be30a9a..e1fa705 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1610,7 +1610,9 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ath9k_ps_wakeup(sc); ath_tx_aggr_stop(sc, sta, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 25a1e2f..9d2051a 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1394,7 +1394,9 @@ static int carl9170_op_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: rcu_read_lock(); tid_info = rcu_dereference(sta_info->agg[tid]); if (tid_info) { diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 1fbd8ec..f0fc8cd 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -668,7 +668,9 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: spin_lock_bh(&wl->lock); brcms_c_ampdu_flush(wl->wlc, sta, tid); spin_unlock_bh(&wl->lock); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index c3fbf67..6a86ed4 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5968,7 +5968,9 @@ il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, D_HT("start Tx\n"); ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: D_HT("stop Tx\n"); ret = il4965_tx_agg_stop(il, vif, sta, tid); if (test_bit(S_EXIT_PENDING, &il->status)) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 3163e0f..02fdcea 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -679,7 +679,9 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, IWL_DEBUG_HT(priv, "start Tx\n"); ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: IWL_DEBUG_HT(priv, "stop Tx\n"); ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); if ((ret == 0) && (priv->agg_tids_count > 0)) { diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 145498f..d248a4c 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1312,7 +1312,9 @@ static int mac80211_hwsim_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_TX_START: ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_OPERATIONAL: diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index f221b95..19b46fd 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5170,7 +5170,9 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } ieee80211_start_tx_ba_cb_irqsafe(vif, addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: if (stream) { if (stream->state == AMPDU_STREAM_ACTIVE) { spin_unlock(&priv->stream_lock); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 197b446..12f93e4 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -5484,7 +5484,9 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, case IEEE80211_AMPDU_TX_START: ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_OPERATIONAL: diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index be33aa1..d3ce9fb 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -879,7 +879,9 @@ static int rtl_op_ampdu_action(struct ieee80211_hw *hw, "IEEE80211_AMPDU_TX_START: TID:%d\n", tid); return rtl_tx_agg_start(hw, sta, tid, ssn); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, "IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid); return rtl_tx_agg_stop(hw, sta, tid); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index ea9d8e0..d7de063 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4575,7 +4575,9 @@ static int wl1271_op_ampdu_action(struct ieee80211_hw *hw, * Falling break here on purpose for all TX APDU commands. */ case IEEE80211_AMPDU_TX_START: - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: case IEEE80211_AMPDU_TX_OPERATIONAL: ret = -EINVAL; break; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0978b0f..a464f4f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2033,17 +2033,29 @@ enum ieee80211_filter_flags { * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer * might receive the addBA frame and send a delBA right away! * - * @IEEE80211_AMPDU_RX_START: start Rx aggregation - * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation - * @IEEE80211_AMPDU_TX_START: start Tx aggregation - * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation + * @IEEE80211_AMPDU_RX_START: start RX aggregation + * @IEEE80211_AMPDU_RX_STOP: stop RX aggregation + * @IEEE80211_AMPDU_TX_START: start TX aggregation * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational + * @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting + * queued packets, now unaggregated. After all packets are transmitted the + * driver has to call ieee80211_stop_tx_ba_cb_irqsafe(). + * @IEEE80211_AMPDU_TX_STOP_FLUSH: stop TX aggregation and flush all packets, + * called when the station is removed. There's no need or reason to call + * ieee80211_stop_tx_ba_cb_irqsafe() in this case as mac80211 assumes the + * session is gone and removes the station. + * @IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: called when TX aggregation is stopped + * but the driver hasn't called ieee80211_stop_tx_ba_cb_irqsafe() yet and + * now the connection is dropped and the station will be removed. Drivers + * should clean up and drop remaining packets when this is called. */ enum ieee80211_ampdu_mlme_action { IEEE80211_AMPDU_RX_START, IEEE80211_AMPDU_RX_STOP, IEEE80211_AMPDU_TX_START, - IEEE80211_AMPDU_TX_STOP, + IEEE80211_AMPDU_TX_STOP_CONT, + IEEE80211_AMPDU_TX_STOP_FLUSH, + IEEE80211_AMPDU_TX_STOP_FLUSH_CONT, IEEE80211_AMPDU_TX_OPERATIONAL, }; diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index dda8d7d..2f0ccbc 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -257,10 +257,25 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, { struct ieee80211_local *local = sta->local; struct tid_ampdu_tx *tid_tx; + enum ieee80211_ampdu_mlme_action action; int ret; lockdep_assert_held(&sta->ampdu_mlme.mtx); + switch (reason) { + case AGG_STOP_DECLINED: + case AGG_STOP_LOCAL_REQUEST: + case AGG_STOP_PEER_REQUEST: + action = IEEE80211_AMPDU_TX_STOP_CONT; + break; + case AGG_STOP_DESTROY_STA: + action = IEEE80211_AMPDU_TX_STOP_FLUSH; + break; + default: + WARN_ON_ONCE(1); + return -EINVAL; + } + spin_lock_bh(&sta->lock); tid_tx = rcu_dereference_protected_tid_tx(sta, tid); @@ -269,10 +284,19 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return -ENOENT; } - /* if we're already stopping ignore any new requests to stop */ + /* + * if we're already stopping ignore any new requests to stop + * unless we're destroying it in which case notify the driver + */ if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { spin_unlock_bh(&sta->lock); - return -EALREADY; + if (reason != AGG_STOP_DESTROY_STA) + return -EALREADY; + ret = drv_ampdu_action(local, sta->sdata, + IEEE80211_AMPDU_TX_STOP_FLUSH_CONT, + &sta->sta, tid, NULL, 0); + WARN_ON_ONCE(ret); + goto remove_tid_tx; } if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { @@ -319,8 +343,7 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, WLAN_BACK_INITIATOR; tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST; - ret = drv_ampdu_action(local, sta->sdata, - IEEE80211_AMPDU_TX_STOP, + ret = drv_ampdu_action(local, sta->sdata, action, &sta->sta, tid, NULL, 0); /* HW shall not deny going back to legacy */ @@ -331,7 +354,14 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ } - return ret; + if (reason == AGG_STOP_DESTROY_STA) { + remove_tid_tx: + spin_lock_bh(&sta->lock); + ieee80211_remove_tid_tx(sta, tid); + spin_unlock_bh(&sta->lock); + } + + return 0; } /* -- cgit v0.10.2 From 598a5938e04ce30d837dca4c3c3326c69435342a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:00:40 +0100 Subject: wireless: use __packed in ieee80211.h Use __packed instead of __attribute__((packed)). Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 09879eb..5db76eb 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -180,7 +180,7 @@ struct ieee80211_hdr { u8 addr3[6]; __le16 seq_ctrl; u8 addr4[6]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_hdr_3addr { __le16 frame_control; @@ -189,7 +189,7 @@ struct ieee80211_hdr_3addr { u8 addr2[6]; u8 addr3[6]; __le16 seq_ctrl; -} __attribute__ ((packed)); +} __packed; struct ieee80211_qos_hdr { __le16 frame_control; @@ -199,7 +199,7 @@ struct ieee80211_qos_hdr { u8 addr3[6]; __le16 seq_ctrl; __le16 qos_ctrl; -} __attribute__ ((packed)); +} __packed; /** * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set @@ -576,7 +576,7 @@ struct ieee80211s_hdr { __le32 seqnum; u8 eaddr1[6]; u8 eaddr2[6]; -} __attribute__ ((packed)); +} __packed; /* Mesh flags */ #define MESH_FLAGS_AE_A4 0x1 @@ -614,7 +614,7 @@ struct ieee80211_quiet_ie { u8 period; __le16 duration; __le16 offset; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_msrment_ie @@ -626,7 +626,7 @@ struct ieee80211_msrment_ie { u8 mode; u8 type; u8 request[0]; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_channel_sw_ie @@ -637,7 +637,7 @@ struct ieee80211_channel_sw_ie { u8 mode; u8 new_ch_num; u8 count; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_tim @@ -650,7 +650,7 @@ struct ieee80211_tim_ie { u8 bitmap_ctrl; /* variable size: 1 - 251 bytes */ u8 virtual_map[1]; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_meshconf_ie @@ -665,7 +665,7 @@ struct ieee80211_meshconf_ie { u8 meshconf_auth; u8 meshconf_form; u8 meshconf_cap; -} __attribute__ ((packed)); +} __packed; /** * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags @@ -695,7 +695,7 @@ struct ieee80211_rann_ie { __le32 rann_seq; __le32 rann_interval; __le32 rann_metric; -} __attribute__ ((packed)); +} __packed; enum ieee80211_rann_flags { RANN_FLAG_IS_GATE = 1 << 0, @@ -717,33 +717,33 @@ struct ieee80211_mgmt { __le16 status_code; /* possibly followed by Challenge text */ u8 variable[0]; - } __attribute__ ((packed)) auth; + } __packed auth; struct { __le16 reason_code; - } __attribute__ ((packed)) deauth; + } __packed deauth; struct { __le16 capab_info; __le16 listen_interval; /* followed by SSID and Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) assoc_req; + } __packed assoc_req; struct { __le16 capab_info; __le16 status_code; __le16 aid; /* followed by Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) assoc_resp, reassoc_resp; + } __packed assoc_resp, reassoc_resp; struct { __le16 capab_info; __le16 listen_interval; u8 current_ap[6]; /* followed by SSID and Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) reassoc_req; + } __packed reassoc_req; struct { __le16 reason_code; - } __attribute__ ((packed)) disassoc; + } __packed disassoc; struct { __le64 timestamp; __le16 beacon_int; @@ -751,11 +751,11 @@ struct ieee80211_mgmt { /* followed by some of SSID, Supported rates, * FH Params, DS Params, CF Params, IBSS Params, TIM */ u8 variable[0]; - } __attribute__ ((packed)) beacon; + } __packed beacon; struct { /* only variable items: SSID, Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) probe_req; + } __packed probe_req; struct { __le64 timestamp; __le16 beacon_int; @@ -763,7 +763,7 @@ struct ieee80211_mgmt { /* followed by some of SSID, Supported rates, * FH Params, DS Params, CF Params, IBSS Params */ u8 variable[0]; - } __attribute__ ((packed)) probe_resp; + } __packed probe_resp; struct { u8 category; union { @@ -772,55 +772,55 @@ struct ieee80211_mgmt { u8 dialog_token; u8 status_code; u8 variable[0]; - } __attribute__ ((packed)) wme_action; + } __packed wme_action; struct{ u8 action_code; u8 element_id; u8 length; struct ieee80211_channel_sw_ie sw_elem; - } __attribute__((packed)) chan_switch; + } __packed chan_switch; struct{ u8 action_code; u8 dialog_token; u8 element_id; u8 length; struct ieee80211_msrment_ie msr_elem; - } __attribute__((packed)) measurement; + } __packed measurement; struct{ u8 action_code; u8 dialog_token; __le16 capab; __le16 timeout; __le16 start_seq_num; - } __attribute__((packed)) addba_req; + } __packed addba_req; struct{ u8 action_code; u8 dialog_token; __le16 status; __le16 capab; __le16 timeout; - } __attribute__((packed)) addba_resp; + } __packed addba_resp; struct{ u8 action_code; __le16 params; __le16 reason_code; - } __attribute__((packed)) delba; + } __packed delba; struct { u8 action_code; u8 variable[0]; - } __attribute__((packed)) self_prot; + } __packed self_prot; struct{ u8 action_code; u8 variable[0]; - } __attribute__((packed)) mesh_action; + } __packed mesh_action; struct { u8 action; u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; - } __attribute__ ((packed)) sa_query; + } __packed sa_query; struct { u8 action; u8 smps_control; - } __attribute__ ((packed)) ht_smps; + } __packed ht_smps; struct { u8 action_code; u8 dialog_token; @@ -828,9 +828,9 @@ struct ieee80211_mgmt { u8 variable[0]; } __packed tdls_discover_resp; } u; - } __attribute__ ((packed)) action; + } __packed action; } u; -} __attribute__ ((packed)); +} __packed; /* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */ #define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 @@ -846,7 +846,7 @@ struct ieee80211_mmie { __le16 key_id; u8 sequence_number[6]; u8 mic[8]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_vendor_ie { u8 element_id; @@ -861,20 +861,20 @@ struct ieee80211_rts { __le16 duration; u8 ra[6]; u8 ta[6]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_cts { __le16 frame_control; __le16 duration; u8 ra[6]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_pspoll { __le16 frame_control; __le16 aid; u8 bssid[6]; u8 ta[6]; -} __attribute__ ((packed)); +} __packed; /* TDLS */ @@ -967,7 +967,7 @@ struct ieee80211_bar { __u8 ta[6]; __le16 control; __le16 start_seq_num; -} __attribute__((packed)); +} __packed; /* 802.11 BAR control masks */ #define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 @@ -992,7 +992,7 @@ struct ieee80211_mcs_info { __le16 rx_highest; u8 tx_params; u8 reserved[3]; -} __attribute__((packed)); +} __packed; /* 802.11n HT capability MSC set */ #define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff @@ -1031,7 +1031,7 @@ struct ieee80211_ht_cap { __le16 extended_ht_cap_info; __le32 tx_BF_cap_info; u8 antenna_selection_info; -} __attribute__ ((packed)); +} __packed; /* 802.11n HT capabilities masks (for cap_info) */ #define IEEE80211_HT_CAP_LDPC_CODING 0x0001 @@ -1102,7 +1102,7 @@ struct ieee80211_ht_operation { __le16 operation_mode; __le16 stbc_param; u8 basic_set[16]; -} __attribute__ ((packed)); +} __packed; /* for ht_param */ #define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 @@ -1839,14 +1839,14 @@ struct ieee80211_country_ie_triplet { u8 first_channel; u8 num_channels; s8 max_power; - } __attribute__ ((packed)) chans; + } __packed chans; struct { u8 reg_extension_id; u8 reg_class; u8 coverage_class; - } __attribute__ ((packed)) ext; + } __packed ext; }; -} __attribute__ ((packed)); +} __packed; enum ieee80211_timeout_interval_type { WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */, -- cgit v0.10.2 From ec61cd63dd3f3bf982180b2bcc1b325160d73837 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:12:10 +0100 Subject: mac80211: support HT notify channel width action Support the HT notify channel width action frame to update the rate scaling about the bandwidth the peer can receive in. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 5db76eb..ccf9ee1 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -701,6 +701,11 @@ enum ieee80211_rann_flags { RANN_FLAG_IS_GATE = 1 << 0, }; +enum ieee80211_ht_chanwidth_values { + IEEE80211_HT_CHANWIDTH_20MHZ = 0, + IEEE80211_HT_CHANWIDTH_ANY = 1, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -823,6 +828,10 @@ struct ieee80211_mgmt { } __packed ht_smps; struct { u8 action_code; + u8 chanwidth; + } __packed ht_notify_cw; + struct { + u8 action_code; u8 dialog_token; __le16 capability; u8 variable[0]; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 580704e..a190895 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2353,7 +2353,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) sdata->vif.type != NL80211_IFTYPE_ADHOC) break; - /* verify action & smps_control are present */ + /* verify action & smps_control/chanwidth are present */ if (len < IEEE80211_MIN_ACTION_SIZE + 2) goto invalid; @@ -2392,6 +2392,35 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) IEEE80211_RC_SMPS_CHANGED); goto handled; } + case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { + struct ieee80211_supported_band *sband; + u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; + bool old_40mhz, new_40mhz; + + /* If it doesn't support 40 MHz it can't change ... */ + if (!rx->sta->supports_40mhz) + goto handled; + + old_40mhz = rx->sta->sta.ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40; + new_40mhz = chanwidth == IEEE80211_HT_CHANWIDTH_ANY; + + if (old_40mhz == new_40mhz) + goto handled; + + if (new_40mhz) + rx->sta->sta.ht_cap.cap |= + IEEE80211_HT_CAP_SUP_WIDTH_20_40; + else + rx->sta->sta.ht_cap.cap &= + ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + sband = rx->local->hw.wiphy->bands[status->band]; + + rate_control_rate_update(local, sband, rx->sta, + IEEE80211_RC_BW_CHANGED); + goto handled; + } default: goto invalid; } -- cgit v0.10.2 From 1c06ef9831c78648f719a174e4598ae2600b0cf7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:22:02 +0100 Subject: wireless: use __aligned Use __aligned(...) instead of __attribute__((aligned(...))) in mac80211 and cfg80211. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1f74360..e5f085c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1256,7 +1256,7 @@ struct cfg80211_bss { u8 bssid[ETH_ALEN]; - u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 priv[0] __aligned(sizeof(void *)); }; /** @@ -2392,7 +2392,7 @@ struct wiphy { const struct iw_handler_def *wext; #endif - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); + char priv[0] __aligned(NETDEV_ALIGN); }; static inline struct net *wiphy_net(struct wiphy *wiphy) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a464f4f..23daed3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -173,7 +173,7 @@ struct ieee80211_chanctx_conf { u8 rx_chains_static, rx_chains_dynamic; - u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 drv_priv[0] __aligned(sizeof(void *)); }; /** @@ -1059,7 +1059,7 @@ struct ieee80211_vif { u32 driver_flags; /* must be last */ - u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 drv_priv[0] __aligned(sizeof(void *)); }; static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) @@ -1209,7 +1209,7 @@ struct ieee80211_sta { u8 max_sp; /* must be last */ - u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 drv_priv[0] __aligned(sizeof(void *)); }; /** diff --git a/net/wireless/core.h b/net/wireless/core.h index b8f4630..f342267 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -89,7 +89,7 @@ struct cfg80211_registered_device { /* must be last because of the way we do wiphy_priv(), * and it should at least be aligned to NETDEV_ALIGN */ - struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN))); + struct wiphy wiphy __aligned(NETDEV_ALIGN); }; static inline -- cgit v0.10.2 From 21add825f90a50407e0121833c8b7cd2c071c478 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 15:01:57 +0100 Subject: mac80211: unset peer's HT 40 MHz support if not usable When an interface is configured to a 20 MHz channel and the device as well as the peer are 40 MHz capable the HT capabilities of the peer are not restricted to 20 MHz, even though they're supposed to be restricted to the currently possible capabilities. Unset the 40 MHz HT capability bits in this case. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index df46cd8..61ac7c4 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -120,6 +120,21 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_DSSSCCK40)); + + /* Unset 40 MHz if we're not using a 40 MHz channel */ + switch (sdata->vif.bss_conf.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + ht_cap->cap &= ~IEEE80211_HT_CAP_SGI_40; + ht_cap->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + break; + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + break; + } + /* * The STBC bits are asymmetric -- if we don't have * TX then mask out the peer's RX and vice versa. -- cgit v0.10.2 From ba23d2068d85f6616ea5f92320c04e87d4b9e141 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 17:32:09 +0100 Subject: cfg80211: disallow more station changes The following changes are invalid and should be disallowed when a station already exists: * supported rates changes, except for TDLS peers * listen interval changes * HT capability changes Disallow them and also update a mac80211 comment explaining how they would be racy. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f4d12c7..7d290bc 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1208,10 +1208,11 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->sta.aid = params->aid; /* - * FIXME: updating the following information is racy when this - * function is called from ieee80211_change_station(). - * However, all this information should be static so - * maybe we should just reject attemps to change it. + * Some of the following updates would be racy if called on an + * existing station, via ieee80211_change_station(). However, + * all such changes are rejected by cfg80211 except for updates + * changing the supported rates on an existing but not yet used + * TDLS peer. */ if (params->listen_interval >= 0) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 087f68b..9bd8340 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3188,13 +3188,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]); } - if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]) - params.listen_interval = - nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]); - - if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) - params.ht_capa = - nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || + info->attrs[NL80211_ATTR_HT_CAPABILITY]) + return -EINVAL; if (!rdev->ops->change_station) return -EOPNOTSUPP; @@ -3246,6 +3242,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) BIT(NL80211_STA_FLAG_ASSOCIATED))) return -EINVAL; + /* reject other things that can't change */ + if (params.supported_rates) + return -EINVAL; + /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); if (IS_ERR(params.vlan)) @@ -3265,10 +3265,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; - if (params.ht_capa) - return -EINVAL; - if (params.listen_interval >= 0) - return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3277,9 +3273,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow things mesh doesn't support */ if (params.vlan) return -EINVAL; - if (params.ht_capa) - return -EINVAL; - if (params.listen_interval >= 0) + if (params.supported_rates) return -EINVAL; /* * No special handling for TDLS here -- the userspace -- cgit v0.10.2 From 046db346386661906dffa33f5ed3dfcdccfddc0b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 5 Dec 2012 15:07:54 +0200 Subject: iwlwifi: make the BC table layout configurable This is needed for newer NICs. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index b76532e..15b4700 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -321,6 +321,8 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) * @n_no_reclaim_cmds: # of commands in list * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs, * if unset 4k will be the RX buffer size + * @bc_table_dword: set to true if the BC table expects the byte count to be + * in DWORD (as opposed to bytes) * @queue_watchdog_timeout: time (in ms) after which queues * are considered stuck and will trigger device restart * @command_names: array of command names, must be 256 entries @@ -335,6 +337,7 @@ struct iwl_trans_config { int n_no_reclaim_cmds; bool rx_buf_size_8k; + bool bc_table_dword; unsigned int queue_watchdog_timeout; const char **command_names; }; diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index d91d2e8..15f7975 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -234,6 +234,7 @@ struct iwl_txq { * @status - transport specific status flags * @cmd_queue - command queue number * @rx_buf_size_8k: 8 kB RX buffer size + * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes) * @rx_page_order: page order for receive buffer size * @wd_timeout: queue watchdog timeout (jiffies) */ @@ -279,6 +280,7 @@ struct iwl_trans_pcie { u8 no_reclaim_cmds[MAX_NO_RECLAIM_CMDS]; bool rx_buf_size_8k; + bool bc_table_dword; u32 rx_page_order; const char **command_names; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 35708b9..ab179ce 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -703,6 +703,7 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans, msecs_to_jiffies(trans_cfg->queue_watchdog_timeout); trans_pcie->command_names = trans_cfg->command_names; + trans_pcie->bc_table_dword = trans_cfg->bc_table_dword; } void iwl_trans_pcie_free(struct iwl_trans *trans) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 6c5b867..7af8f0b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -237,7 +237,10 @@ static void iwl_pcie_txq_update_byte_cnt_tbl(struct iwl_trans *trans, break; } - bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12)); + if (trans_pcie->bc_table_dword) + len = DIV_ROUND_UP(len, 4); + + bc_ent = cpu_to_le16(len | (sta_id << 12)); scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; -- cgit v0.10.2 From da58eefa6d16281c063eba6467690325bfb5f372 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 18 Dec 2012 10:47:28 +0200 Subject: iwlwifi: clean up code in AGG If we take a pointer to the tid_data, then use it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index da21328..df76881 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -541,9 +541,9 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, spin_lock_bh(&priv->sta_lock); tid_data = &priv->tid_data[sta_id][tid]; - txq_id = priv->tid_data[sta_id][tid].agg.txq_id; + txq_id = tid_data->agg.txq_id; - switch (priv->tid_data[sta_id][tid].agg.state) { + switch (tid_data->agg.state) { case IWL_EMPTYING_HW_QUEUE_ADDBA: /* * This can happen if the peer stops aggregation @@ -563,9 +563,9 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, case IWL_AGG_ON: break; default: - IWL_WARN(priv, "Stopping AGG while state not ON " - "or starting for %d on %d (%d)\n", sta_id, tid, - priv->tid_data[sta_id][tid].agg.state); + IWL_WARN(priv, + "Stopping AGG while state not ON or starting for %d on %d (%d)\n", + sta_id, tid, tid_data->agg.state); spin_unlock_bh(&priv->sta_lock); return 0; } @@ -578,12 +578,11 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, "stopping AGG on STA/TID %d/%d but hwq %d not used\n", sta_id, tid, txq_id); } else if (tid_data->agg.ssn != tid_data->next_reclaimed) { - IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, " - "next_recl = %d\n", + IWL_DEBUG_TX_QUEUES(priv, + "Can't proceed: ssn %d, next_recl = %d\n", tid_data->agg.ssn, tid_data->next_reclaimed); - priv->tid_data[sta_id][tid].agg.state = - IWL_EMPTYING_HW_QUEUE_DELBA; + tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_DELBA; spin_unlock_bh(&priv->sta_lock); return 0; } @@ -591,8 +590,8 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n", tid_data->agg.ssn); turn_off: - agg_state = priv->tid_data[sta_id][tid].agg.state; - priv->tid_data[sta_id][tid].agg.state = IWL_AGG_OFF; + agg_state = tid_data->agg.state; + tid_data->agg.state = IWL_AGG_OFF; spin_unlock_bh(&priv->sta_lock); -- cgit v0.10.2 From d28cbdef8cb7ea04d5ef7c9d7b14df0751560522 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 16:51:22 +0200 Subject: iwlwifi: don't verify fw after download No need to verify that the fw has been written correctly. In case it hasn't, we won't get ALIVE notification. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index c6467e5..ecf700b 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -286,89 +286,6 @@ static int iwl_alive_notify(struct iwl_priv *priv) return iwl_send_calib_results(priv); } - -/** - * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl_verify_sec_sparse(struct iwl_priv *priv, - const struct fw_desc *fw_desc) -{ - __le32 *image = (__le32 *)fw_desc->data; - u32 len = fw_desc->len; - u32 val; - u32 i; - - IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR, - i + fw_desc->offset); - val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) - return -EIO; - } - - return 0; -} - -static void iwl_print_mismatch_sec(struct iwl_priv *priv, - const struct fw_desc *fw_desc) -{ - __le32 *image = (__le32 *)fw_desc->data; - u32 len = fw_desc->len; - u32 val; - u32 offs; - int errors = 0; - - IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); - - iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR, - fw_desc->offset); - - for (offs = 0; - offs < len && errors < 20; - offs += sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "uCode INST section at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - offs, val, le32_to_cpu(*image)); - errors++; - } - } -} - -/** - * iwl_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl_verify_ucode(struct iwl_priv *priv, - enum iwl_ucode_type ucode_type) -{ - const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type); - - if (!img) { - IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type); - return -EINVAL; - } - - if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) { - IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n"); - - iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]); - return -EIO; -} - struct iwl_alive_data { bool valid; u8 subtype; @@ -450,18 +367,7 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return -EIO; } - /* - * This step takes a long time (60-80ms!!) and - * WoWLAN image should be loaded quickly, so - * skip it for WoWLAN. - */ if (ucode_type != IWL_UCODE_WOWLAN) { - ret = iwl_verify_ucode(priv, ucode_type); - if (ret) { - priv->cur_ucode = old_type; - return ret; - } - /* delay a bit to give rfkill time to run */ msleep(5); } -- cgit v0.10.2 From 6ae02f3ef7f20af0237e21a979f66b13198921da Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 11:10:43 +0200 Subject: iwlwifi: let the op_mode run a FW while in RFKILL In some cases, the fw should run even if the NIC is in RFKILL. Make the API more flexible to allow that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index ecf700b..ebec13a 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -343,7 +343,7 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, alive_cmd, ARRAY_SIZE(alive_cmd), iwl_alive_fn, &alive_data); - ret = iwl_trans_start_fw(priv->trans, fw); + ret = iwl_trans_start_fw(priv->trans, fw, false); if (ret) { priv->cur_ucode = old_type; iwl_remove_notification(&priv->notif_wait, &alive_wait); diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 15b4700..16a82b5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -399,7 +399,8 @@ struct iwl_trans_ops { int (*start_hw)(struct iwl_trans *iwl_trans); void (*stop_hw)(struct iwl_trans *iwl_trans, bool op_mode_leaving); - int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw); + int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, + bool run_in_rfkill); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); void (*stop_device)(struct iwl_trans *trans); @@ -531,13 +532,14 @@ static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr) } static inline int iwl_trans_start_fw(struct iwl_trans *trans, - const struct fw_img *fw) + const struct fw_img *fw, + bool run_in_rfkill) { might_sleep(); WARN_ON_ONCE(!trans->rx_mpdu_cmd); - return trans->ops->start_fw(trans, fw); + return trans->ops->start_fw(trans, fw, run_in_rfkill); } static inline void iwl_trans_stop_device(struct iwl_trans *trans) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index ab179ce..e67e179 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -435,7 +435,7 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans, } static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, - const struct fw_img *fw) + const struct fw_img *fw, bool run_in_rfkill) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); int ret; @@ -454,7 +454,7 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, /* If platform's RF_KILL switch is NOT set to KILL */ hw_rfkill = iwl_is_rfkill_set(trans); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - if (hw_rfkill) + if (hw_rfkill && !run_in_rfkill) return -ERFKILL; iwl_write32(trans, CSR_INT, 0xFFFFFFFF); -- cgit v0.10.2 From f317243a8ba1b05338bc03c6606a51021f249a67 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:27:43 +0100 Subject: iwlwifi: use __packed Use __packed instead of __attribute__((packed)). Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h index 71ab76b..0ca99c1 100644 --- a/drivers/net/wireless/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -3695,7 +3695,7 @@ struct iwl_bt_uart_msg { u8 frame5; u8 frame6; u8 frame7; -} __attribute__((packed)); +} __packed; struct iwl_bt_coex_profile_notif { struct iwl_bt_uart_msg last_bt_uart_msg; @@ -3703,7 +3703,7 @@ struct iwl_bt_coex_profile_notif { u8 bt_traffic_load; /* 0 .. 3? */ u8 bt_ci_compliance; /* 0 - not complied, 1 - complied */ u8 reserved; -} __attribute__((packed)); +} __packed; #define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS 0 #define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_MSK 0x1 @@ -3752,7 +3752,7 @@ enum bt_coex_prio_table_priorities { struct iwl_bt_coex_prio_table_cmd { u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX]; -} __attribute__((packed)); +} __packed; #define IWL_BT_COEX_ENV_CLOSE 0 #define IWL_BT_COEX_ENV_OPEN 1 @@ -3764,7 +3764,7 @@ struct iwl_bt_coex_prot_env_cmd { u8 action; /* 0 = closed, 1 = open */ u8 type; /* 0 .. 15 */ u8 reserved[2]; -} __attribute__((packed)); +} __packed; /* * REPLY_D3_CONFIG -- cgit v0.10.2 From 7a65d17053c758109477f420e813ba2d826b0eae Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 15:01:24 +0200 Subject: iwlwifi: virtualize iwl_{grab,release}_nic_access Since different transports have different ways to wake the up the NIC, we need to virtualize it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 3163e0f..8965a98 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -459,11 +459,11 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) base = priv->device_pointers.error_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { spin_lock_irqsave(&priv->trans->reg_lock, flags); - ret = iwl_grab_nic_access_silent(priv->trans); + ret = iwl_trans_grab_nic_access(priv->trans, true); if (likely(ret == 0)) { iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(priv->trans); + iwl_trans_release_nic_access(priv->trans); } spin_unlock_irqrestore(&priv->trans->reg_lock, flags); diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index faa0593..c4caedd 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -354,7 +354,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&priv->trans->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(priv->trans))) { + if (unlikely(!iwl_trans_grab_nic_access(priv->trans, false))) { spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); return; } @@ -388,7 +388,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, } } /* Allow device to power down */ - iwl_release_nic_access(priv->trans); + iwl_trans_release_nic_access(priv->trans); spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); } @@ -1717,7 +1717,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&trans->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(trans))) + if (unlikely(!iwl_trans_grab_nic_access(trans, false))) goto out_unlock; /* Set starting address; reads will auto-increment */ @@ -1756,7 +1756,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, } /* Allow device to power down */ - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); out_unlock: spin_unlock_irqrestore(&trans->reg_lock, reg_flags); return pos; diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index eb86443..a8ae513 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -186,8 +186,8 @@ static void iwl_tt_check_exit_ct_kill(unsigned long data) } iwl_read32(priv->trans, CSR_UCODE_DRV_GP1); spin_lock_irqsave(&priv->trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(priv->trans))) - iwl_release_nic_access(priv->trans); + if (likely(iwl_trans_grab_nic_access(priv->trans, false))) + iwl_trans_release_nic_access(priv->trans); spin_unlock_irqrestore(&priv->trans->reg_lock, flags); /* Reschedule the ct_kill timer to occur in diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index cdaff95..cb36fed 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -35,12 +35,12 @@ #define IWL_POLL_INTERVAL 10 /* microseconds */ -static inline void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) +void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) { iwl_write32(trans, reg, iwl_read32(trans, reg) | mask); } -static inline void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) +void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) { iwl_write32(trans, reg, iwl_read32(trans, reg) & ~mask); } @@ -99,86 +99,15 @@ int iwl_poll_bit(struct iwl_trans *trans, u32 addr, } EXPORT_SYMBOL_GPL(iwl_poll_bit); -int iwl_grab_nic_access_silent(struct iwl_trans *trans) -{ - int ret; - - lockdep_assert_held(&trans->reg_lock); - - /* this bit wakes up the NIC */ - __iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - /* - * These bits say the device is running, and should keep running for - * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), - * but they do not indicate that embedded SRAM is restored yet; - * 3945 and 4965 have volatile SRAM, and must save/restore contents - * to/from host DRAM when sleeping/waking for power-saving. - * Each direction takes approximately 1/4 millisecond; with this - * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a - * series of register accesses are expected (e.g. reading Event Log), - * to keep device from sleeping. - * - * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that - * SRAM is okay/restored. We don't check that here because this call - * is just for hardware register access; but GP1 MAC_SLEEP check is a - * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). - * - * 5000 series and later (including 1000 series) have non-volatile SRAM, - * and do not save/restore SRAM when power cycling. - */ - ret = iwl_poll_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, - (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | - CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000); - if (ret < 0) { - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI); - return -EIO; - } - - return 0; -} -EXPORT_SYMBOL_GPL(iwl_grab_nic_access_silent); - -bool iwl_grab_nic_access(struct iwl_trans *trans) -{ - int ret = iwl_grab_nic_access_silent(trans); - if (unlikely(ret)) { - u32 val = iwl_read32(trans, CSR_GP_CNTRL); - WARN_ONCE(1, "Timeout waiting for hardware access " - "(CSR_GP_CNTRL 0x%08x)\n", val); - return false; - } - - return true; -} -EXPORT_SYMBOL_GPL(iwl_grab_nic_access); - -void iwl_release_nic_access(struct iwl_trans *trans) -{ - lockdep_assert_held(&trans->reg_lock); - __iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - /* - * Above we read the CSR_GP_CNTRL register, which will flush - * any previous writes, but we need the write that clears the - * MAC_ACCESS_REQ bit to be performed before any other writes - * scheduled on different CPUs (after we drop reg_lock). - */ - mmiowb(); -} -EXPORT_SYMBOL_GPL(iwl_release_nic_access); - u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg) { u32 value; unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); value = iwl_read32(trans, reg); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); return value; @@ -190,9 +119,9 @@ void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { iwl_write32(trans, reg, value); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -233,9 +162,9 @@ u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs) u32 val; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); val = __iwl_read_prph(trans, ofs); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); return val; } @@ -246,9 +175,9 @@ void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { __iwl_write_prph(trans, ofs, val); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -259,10 +188,10 @@ void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { __iwl_write_prph(trans, ofs, __iwl_read_prph(trans, ofs) | mask); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -274,10 +203,10 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { __iwl_write_prph(trans, ofs, (__iwl_read_prph(trans, ofs) & mask) | bits); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -289,10 +218,10 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) u32 val; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { val = __iwl_read_prph(trans, ofs); __iwl_write_prph(trans, ofs, (val & ~mask)); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -306,11 +235,11 @@ void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr, u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); for (offs = 0; offs < dwords; offs++) vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -334,13 +263,14 @@ int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr, const u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); - iwl_release_nic_access(trans); - } else + iwl_trans_release_nic_access(trans); + } else { result = -EBUSY; + } spin_unlock_irqrestore(&trans->reg_lock, flags); return result; diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 48dc753..40eb0a1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -53,6 +53,8 @@ static inline u32 iwl_read32(struct iwl_trans *trans, u32 ofs) void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); +void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); +void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); void iwl_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value); @@ -61,10 +63,6 @@ int iwl_poll_bit(struct iwl_trans *trans, u32 addr, int iwl_poll_direct_bit(struct iwl_trans *trans, u32 addr, u32 mask, int timeout); -int iwl_grab_nic_access_silent(struct iwl_trans *trans); -bool iwl_grab_nic_access(struct iwl_trans *trans); -void iwl_release_nic_access(struct iwl_trans *trans); - u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg); void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value); diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index 81e8c71..08c1cfe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -467,13 +467,13 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); iwl_write32(trans, HBUS_TARG_PRPH_RADDR, addr | (3 << 24)); for (i = 0; i < size; i += 4) *(u32 *)(tst->mem.addr + i) = iwl_read32(trans, HBUS_TARG_PRPH_RDAT); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); } else { /* target memory (SRAM) */ _iwl_read_targ_mem_dwords(trans, addr, @@ -505,12 +505,12 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, if (size < 4) { memcpy(&val, buf, size); spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); iwl_write32(trans, HBUS_TARG_PRPH_WADDR, (addr & 0x0000FFFF) | ((size - 1) << 24)); iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); /* needed after consecutive writes w/o read */ mmiowb(); spin_unlock_irqrestore(&trans->reg_lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 16a82b5..1d1f5d0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -394,6 +394,8 @@ struct iwl_trans; * the op_mode. May be called several times before start_fw, can't be * called after that. * @set_pmi: set the power pmi state + * @grab_nic_access: wake the NIC to be able to access non-HBUS regs + * @release_nic_access: let the NIC go to sleep */ struct iwl_trans_ops { @@ -431,6 +433,8 @@ struct iwl_trans_ops { void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); + bool (*grab_nic_access)(struct iwl_trans *trans, bool silent); + void (*release_nic_access)(struct iwl_trans *trans); }; /** @@ -689,6 +693,17 @@ static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) trans->ops->set_pmi(trans, state); } +static inline bool iwl_trans_grab_nic_access(struct iwl_trans *trans, + bool silent) +{ + return trans->ops->grab_nic_access(trans, silent); +} + +static inline void iwl_trans_release_nic_access(struct iwl_trans *trans) +{ + trans->ops->release_nic_access(trans); +} + /***************************************************** * driver (transport) register/unregister functions ******************************************************/ diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index e67e179..80b05d8 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -759,6 +759,68 @@ static int iwl_trans_pcie_resume(struct iwl_trans *trans) } #endif /* CONFIG_PM_SLEEP */ +static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent) +{ + int ret; + + lockdep_assert_held(&trans->reg_lock); + + /* this bit wakes up the NIC */ + __iwl_set_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + + /* + * These bits say the device is running, and should keep running for + * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), + * but they do not indicate that embedded SRAM is restored yet; + * 3945 and 4965 have volatile SRAM, and must save/restore contents + * to/from host DRAM when sleeping/waking for power-saving. + * Each direction takes approximately 1/4 millisecond; with this + * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a + * series of register accesses are expected (e.g. reading Event Log), + * to keep device from sleeping. + * + * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that + * SRAM is okay/restored. We don't check that here because this call + * is just for hardware register access; but GP1 MAC_SLEEP check is a + * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). + * + * 5000 series and later (including 1000 series) have non-volatile SRAM, + * and do not save/restore SRAM when power cycling. + */ + ret = iwl_poll_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, + (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | + CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000); + if (unlikely(ret < 0)) { + iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI); + if (!silent) { + u32 val = iwl_read32(trans, CSR_GP_CNTRL); + WARN_ONCE(1, + "Timeout waiting for hardware access (CSR_GP_CNTRL 0x%08x)\n", + val); + return false; + } + } + + return true; +} + +static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) +{ + lockdep_assert_held(&trans->reg_lock); + __iwl_clear_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + /* + * Above we read the CSR_GP_CNTRL register, which will flush + * any previous writes, but we need the write that clears the + * MAC_ACCESS_REQ bit to be performed before any other writes + * scheduled on different CPUs (after we drop reg_lock). + */ + mmiowb(); +} + + #define IWL_FLUSH_WAIT_MS 2000 static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) @@ -1238,6 +1300,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .write_prph = iwl_trans_pcie_write_prph, .configure = iwl_trans_pcie_configure, .set_pmi = iwl_trans_pcie_set_pmi, + .grab_nic_access = iwl_trans_pcie_grab_nic_access, + .release_nic_access = iwl_trans_pcie_release_nic_access }; struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, -- cgit v0.10.2 From 4fd442db98dadf33ecce6d489bbbc95f6e8d3b31 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 14:27:11 +0200 Subject: iwlwifi: virtualize SRAM access Different transports implement the access to the SRAM in different ways. Virtualize it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 5b9533e..72c74af 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -157,7 +157,7 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, sram = priv->dbgfs_sram_offset & ~0x3; /* read the first u32 from sram */ - val = iwl_read_targ_mem(priv->trans, sram); + val = iwl_trans_read_mem32(priv->trans, sram); for (; len; len--) { /* put the address at the start of every line */ @@ -176,7 +176,7 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, if (++offset == 4) { sram += 4; offset = 0; - val = iwl_read_targ_mem(priv->trans, sram); + val = iwl_trans_read_mem32(priv->trans, sram); } /* put in extra spaces and split lines for human readability */ diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 8965a98..9c1f055 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -479,7 +479,7 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) } if (priv->wowlan_sram) - _iwl_read_targ_mem_dwords( + iwl_trans_read_mem( priv->trans, 0x800000, priv->wowlan_sram, img->sec[IWL_UCODE_SECTION_DATA].len / 4); diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index c4caedd..517d7ae 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -408,7 +408,8 @@ static void iwl_continuous_event_trace(struct iwl_priv *priv) base = priv->device_pointers.log_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { - iwl_read_targ_mem_bytes(priv->trans, base, &read, sizeof(read)); + iwl_trans_read_mem_bytes(priv->trans, base, + &read, sizeof(read)); capacity = read.capacity; mode = read.mode; num_wraps = read.wrap_counter; @@ -1627,7 +1628,7 @@ static void iwl_dump_nic_error_log(struct iwl_priv *priv) } /*TODO: Update dbgfs with ISR error stats obtained below */ - iwl_read_targ_mem_bytes(trans, base, &table, sizeof(table)); + iwl_trans_read_mem_bytes(trans, base, &table, sizeof(table)); if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) { IWL_ERR(trans, "Start IWL Error Log Dump:\n"); @@ -1835,10 +1836,10 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log, } /* event log header */ - capacity = iwl_read_targ_mem(trans, base); - mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32))); + capacity = iwl_trans_read_mem32(trans, base); + mode = iwl_trans_read_mem32(trans, base + (1 * sizeof(u32))); + num_wraps = iwl_trans_read_mem32(trans, base + (2 * sizeof(u32))); + next_entry = iwl_trans_read_mem32(trans, base + (3 * sizeof(u32))); if (capacity > logsize) { IWL_ERR(priv, "Log capacity %d is bogus, limit to %d " diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index cb36fed..2bd84ad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -226,59 +226,3 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_clear_bits_prph); - -void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - void *buf, int dwords) -{ - unsigned long flags; - int offs; - u32 *vals = buf; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { - iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); - for (offs = 0; offs < dwords; offs++) - vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} -EXPORT_SYMBOL_GPL(_iwl_read_targ_mem_dwords); - -u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr) -{ - u32 value; - - _iwl_read_targ_mem_dwords(trans, addr, &value, 1); - - return value; -} -EXPORT_SYMBOL_GPL(iwl_read_targ_mem); - -int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - const void *buf, int dwords) -{ - unsigned long flags; - int offs, result = 0; - const u32 *vals = buf; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { - iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); - for (offs = 0; offs < dwords; offs++) - iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); - iwl_trans_release_nic_access(trans); - } else { - result = -EBUSY; - } - spin_unlock_irqrestore(&trans->reg_lock, flags); - - return result; -} -EXPORT_SYMBOL_GPL(_iwl_write_targ_mem_dwords); - -int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val) -{ - return _iwl_write_targ_mem_dwords(trans, addr, &val, 1); -} -EXPORT_SYMBOL_GPL(iwl_write_targ_mem); diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 40eb0a1..dc47806 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -74,19 +74,4 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, u32 bits, u32 mask); void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask); -void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - void *buf, int dwords); - -#define iwl_read_targ_mem_bytes(trans, addr, buf, bufsize) \ - do { \ - BUILD_BUG_ON((bufsize) % sizeof(u32)); \ - _iwl_read_targ_mem_dwords(trans, addr, buf, \ - (bufsize) / sizeof(u32));\ - } while (0) - -int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - const void *buf, int dwords); - -u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr); -int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val); #endif diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index 08c1cfe..f8d8df8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -476,9 +476,8 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); } else { /* target memory (SRAM) */ - _iwl_read_targ_mem_dwords(trans, addr, - tst->mem.addr, - tst->mem.size / 4); + iwl_trans_read_mem(trans, addr, tst->mem.addr, + tst->mem.size / 4); } tst->mem.nchunks = @@ -522,7 +521,7 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, *(u32 *)(buf+i)); } } else if (iwl_test_valid_hw_addr(tst, addr)) { - _iwl_write_targ_mem_dwords(trans, addr, buf, size / 4); + iwl_trans_write_mem(trans, addr, buf, size / 4); } else { return -EINVAL; } diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 1d1f5d0..7584d55 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -390,6 +390,8 @@ struct iwl_trans; * @read32: read a u32 register at offset ofs from the BAR * @read_prph: read a DWORD from a periphery register * @write_prph: write a DWORD to a periphery register + * @read_mem: read device's SRAM in DWORD + * @write_mem: write device's SRAM in DWORD * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. @@ -430,6 +432,10 @@ struct iwl_trans_ops { u32 (*read32)(struct iwl_trans *trans, u32 ofs); u32 (*read_prph)(struct iwl_trans *trans, u32 ofs); void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val); + int (*read_mem)(struct iwl_trans *trans, u32 addr, + void *buf, int dwords); + int (*write_mem)(struct iwl_trans *trans, u32 addr, + void *buf, int dwords); void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); @@ -645,7 +651,7 @@ static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans) } static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans, - struct dentry *dir) + struct dentry *dir) { return trans->ops->dbgfs_register(trans, dir); } @@ -688,6 +694,41 @@ static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs, return trans->ops->write_prph(trans, ofs, val); } +static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + return trans->ops->read_mem(trans, addr, buf, dwords); +} + +#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \ + do { \ + if (__builtin_constant_p(bufsize)) \ + BUILD_BUG_ON((bufsize) % sizeof(u32)); \ + iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\ + } while (0) + +static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr) +{ + u32 value; + + if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1))) + return 0xa5a5a5a5; + + return value; +} + +static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + return trans->ops->write_mem(trans, addr, buf, dwords); +} + +static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr, + u32 val) +{ + return iwl_trans_write_mem(trans, addr, &val, 1); +} + static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) { trans->ops->set_pmi(trans, state); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 80b05d8..3a40607 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -820,6 +820,45 @@ static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) mmiowb(); } +static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + unsigned long flags; + int offs, ret = 0; + u32 *vals = buf; + + spin_lock_irqsave(&trans->reg_lock, flags); + if (likely(iwl_trans_grab_nic_access(trans, false))) { + iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); + for (offs = 0; offs < dwords; offs++) + vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); + iwl_trans_release_nic_access(trans); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&trans->reg_lock, flags); + return ret; +} + +static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + unsigned long flags; + int offs, ret = 0; + u32 *vals = buf; + + spin_lock_irqsave(&trans->reg_lock, flags); + if (likely(iwl_trans_grab_nic_access(trans, false))) { + iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); + for (offs = 0; offs < dwords; offs++) + iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); + iwl_trans_release_nic_access(trans); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&trans->reg_lock, flags); + return ret; +} #define IWL_FLUSH_WAIT_MS 2000 @@ -1298,6 +1337,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .read32 = iwl_trans_pcie_read32, .read_prph = iwl_trans_pcie_read_prph, .write_prph = iwl_trans_pcie_write_prph, + .read_mem = iwl_trans_pcie_read_mem, + .write_mem = iwl_trans_pcie_write_mem, .configure = iwl_trans_pcie_configure, .set_pmi = iwl_trans_pcie_set_pmi, .grab_nic_access = iwl_trans_pcie_grab_nic_access, diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 7af8f0b..d25fc8a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -160,7 +160,7 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n", txq->q.read_ptr, txq->q.write_ptr); - iwl_read_targ_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf)); + iwl_trans_read_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf)); iwl_print_hex_error(trans, buf, sizeof(buf)); @@ -173,9 +173,9 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) u8 fifo = (status >> SCD_QUEUE_STTS_REG_POS_TXF) & 0x7; bool active = !!(status & BIT(SCD_QUEUE_STTS_REG_POS_ACTIVE)); u32 tbl_dw = - iwl_read_targ_mem(trans, - trans_pcie->scd_base_addr + - SCD_TRANS_TBL_OFFSET_QUEUE(i)); + iwl_trans_read_mem32(trans, + trans_pcie->scd_base_addr + + SCD_TRANS_TBL_OFFSET_QUEUE(i)); if (i & 0x1) tbl_dw = (tbl_dw & 0xFFFF0000) >> 16; @@ -659,16 +659,16 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) /* reset conext data memory */ for (; a < trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_UPPER_BOUND; a += 4) - iwl_write_targ_mem(trans, a, 0); + iwl_trans_write_mem32(trans, a, 0); /* reset tx status memory */ for (; a < trans_pcie->scd_base_addr + SCD_TX_STTS_MEM_UPPER_BOUND; a += 4) - iwl_write_targ_mem(trans, a, 0); + iwl_trans_write_mem32(trans, a, 0); for (; a < trans_pcie->scd_base_addr + SCD_TRANS_TBL_OFFSET_QUEUE( trans->cfg->base_params->num_of_queues); a += 4) - iwl_write_targ_mem(trans, a, 0); + iwl_trans_write_mem32(trans, a, 0); iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, trans_pcie->scd_bc_tbls.dma >> 10); @@ -1005,14 +1005,14 @@ static int iwl_pcie_txq_set_ratid_map(struct iwl_trans *trans, u16 ra_tid, tbl_dw_addr = trans_pcie->scd_base_addr + SCD_TRANS_TBL_OFFSET_QUEUE(txq_id); - tbl_dw = iwl_read_targ_mem(trans, tbl_dw_addr); + tbl_dw = iwl_trans_read_mem32(trans, tbl_dw_addr); if (txq_id & 0x1) tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); else tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); - iwl_write_targ_mem(trans, tbl_dw_addr, tbl_dw); + iwl_trans_write_mem32(trans, tbl_dw_addr, tbl_dw); return 0; } @@ -1071,9 +1071,9 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, iwl_write_prph(trans, SCD_QUEUE_RDPTR(txq_id), ssn); /* Set up Tx window size and frame limit for this queue */ - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + + iwl_trans_write_mem32(trans, trans_pcie->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id), 0); - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + + iwl_trans_write_mem32(trans, trans_pcie->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), ((frame_limit << SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) & SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) | @@ -1104,8 +1104,8 @@ void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id) iwl_pcie_txq_set_inactive(trans, txq_id); - _iwl_write_targ_mem_dwords(trans, stts_addr, - zero_val, ARRAY_SIZE(zero_val)); + iwl_trans_write_mem(trans, stts_addr, (void *)zero_val, + ARRAY_SIZE(zero_val)); iwl_pcie_txq_unmap(trans, txq_id); -- cgit v0.10.2 From 653ea7a6a5a912a96affc6443b6e9f42dfce2234 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 31 Dec 2012 13:15:36 +0200 Subject: iwlwifi: don't treat a bool as an error code iwl_trans_grab_nic_access returns a boolean. So ret should explicitely set to an error code and not rely on the value returned by iwl_trans_grab_nic_access. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 9c1f055..1ed4bc6 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -459,11 +459,11 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) base = priv->device_pointers.error_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { spin_lock_irqsave(&priv->trans->reg_lock, flags); - ret = iwl_trans_grab_nic_access(priv->trans, true); - if (likely(ret == 0)) { + if (iwl_trans_grab_nic_access(priv->trans, true)) { iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); iwl_trans_release_nic_access(priv->trans); + ret = 0; } spin_unlock_irqrestore(&priv->trans->reg_lock, flags); -- cgit v0.10.2 From a8b691e6104e6bd27070b6ed6622d0b640707fa8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 23:08:06 +0100 Subject: iwlwifi: request IRQ only once There's no need to request the IRQ every time the device is started, we can request it just once. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 15f7975..8f017c3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -222,8 +222,6 @@ struct iwl_txq { * @rx_replenish: work that will be called when buffers need to be allocated * @drv - pointer to iwl_drv * @trans: pointer to the generic transport area - * @irq - the irq number for the device - * @irq_requested: true when the irq has been requested * @scd_base_addr: scheduler sram base address in SRAM * @scd_bc_tbls: pointer to the byte count table of the scheduler * @kw: keep warm address @@ -250,11 +248,9 @@ struct iwl_trans_pcie { int ict_index; u32 inta; bool use_ict; - bool irq_requested; struct tasklet_struct irq_tasklet; struct isr_statistics isr_stats; - unsigned int irq; spinlock_t irq_lock; u32 inta_mask; u32 scd_base_addr; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 3a40607..48cd65e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -535,7 +535,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); /* wait to make sure we flush pending tasklet*/ - synchronize_irq(trans_pcie->irq); + synchronize_irq(trans_pcie->pci_dev->irq); tasklet_kill(&trans_pcie->irq_tasklet); cancel_work_sync(&trans_pcie->rx_replenish); @@ -564,33 +564,13 @@ static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans) static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) { - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int err; bool hw_rfkill; - - trans_pcie->inta_mask = CSR_INI_SET_MASK; - - if (!trans_pcie->irq_requested) { - tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) - iwl_pcie_tasklet, (unsigned long)trans); - - iwl_pcie_alloc_ict(trans); - - err = request_irq(trans_pcie->irq, iwl_pcie_isr_ict, - IRQF_SHARED, DRV_NAME, trans); - if (err) { - IWL_ERR(trans, "Error allocating IRQ %d\n", - trans_pcie->irq); - goto error; - } - - trans_pcie->irq_requested = true; - } + int err; err = iwl_pcie_prepare_card_hw(trans); if (err) { IWL_ERR(trans, "Error while preparing HW: %d\n", err); - goto err_free_irq; + return err; } iwl_pcie_apm_init(trans); @@ -601,15 +581,7 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) hw_rfkill = iwl_is_rfkill_set(trans); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - return err; - -err_free_irq: - trans_pcie->irq_requested = false; - free_irq(trans_pcie->irq, trans); -error: - iwl_pcie_free_ict(trans); - tasklet_kill(&trans_pcie->irq_tasklet); - return err; + return 0; } static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans, @@ -713,10 +685,8 @@ void iwl_trans_pcie_free(struct iwl_trans *trans) iwl_pcie_tx_free(trans); iwl_pcie_rx_free(trans); - if (trans_pcie->irq_requested == true) { - free_irq(trans_pcie->irq, trans); - iwl_pcie_free_ict(trans); - } + free_irq(trans_pcie->pci_dev->irq, trans); + iwl_pcie_free_ict(trans); pci_disable_msi(trans_pcie->pci_dev); iounmap(trans_pcie->hw_base); @@ -1424,7 +1394,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, } trans->dev = &pdev->dev; - trans_pcie->irq = pdev->irq; trans_pcie->pci_dev = pdev; trans->hw_rev = iwl_read32(trans, CSR_HW_REV); trans->hw_id = (pdev->device << 16) + pdev->subsystem_device; @@ -1450,8 +1419,27 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, if (!trans->dev_cmd_pool) goto out_pci_disable_msi; + trans_pcie->inta_mask = CSR_INI_SET_MASK; + + tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) + iwl_pcie_tasklet, (unsigned long)trans); + + if (iwl_pcie_alloc_ict(trans)) + goto out_free_cmd_pool; + + err = request_irq(pdev->irq, iwl_pcie_isr_ict, + IRQF_SHARED, DRV_NAME, trans); + if (err) { + IWL_ERR(trans, "Error allocating IRQ %d\n", pdev->irq); + goto out_free_ict; + } + return trans; +out_free_ict: + iwl_pcie_free_ict(trans); +out_free_cmd_pool: + kmem_cache_destroy(trans->dev_cmd_pool); out_pci_disable_msi: pci_disable_msi(pdev); out_pci_release_regions: -- cgit v0.10.2 From 0aa86df673d2122fcffc43ed0266279e1b8d8204 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 22:58:21 +0100 Subject: iwlwifi: move some PCIe calls to better places Synchronizing the IRQ is pointless when we will then enable the RF-Kill interrupt again, but is needed before we free it and the data needed to handle IRQs; move it to the free function. Simiarly, cancelling the replenish work struct can move to the function that frees the RX data structures. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index dad4c4a..02c9016 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -545,6 +545,8 @@ void iwl_pcie_rx_free(struct iwl_trans *trans) return; } + cancel_work_sync(&trans_pcie->rx_replenish); + spin_lock_irqsave(&rxq->lock, flags); iwl_pcie_rxq_free_rbs(trans); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 48cd65e..bca6203 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -534,12 +534,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(trans_pcie->pci_dev->irq); - tasklet_kill(&trans_pcie->irq_tasklet); - - cancel_work_sync(&trans_pcie->rx_replenish); - /* stop and reset the on-board processor */ iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); @@ -682,6 +676,9 @@ void iwl_trans_pcie_free(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + synchronize_irq(trans_pcie->pci_dev->irq); + tasklet_kill(&trans_pcie->irq_tasklet); + iwl_pcie_tx_free(trans); iwl_pcie_rx_free(trans); -- cgit v0.10.2 From c8f9b0feab564e1ecf460b440e838673aced282c Mon Sep 17 00:00:00 2001 From: Eytan Lifshitz Date: Fri, 28 Dec 2012 00:10:36 +0200 Subject: iwlwifi: fix spelling and value in LED registers. Fix typo in the macro name and the wrong value. Signed-off-by: Eytan Lifshitz Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/led.c b/drivers/net/wireless/iwlwifi/dvm/led.c index bf479f7..844a17f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/led.c +++ b/drivers/net/wireless/iwlwifi/dvm/led.c @@ -69,7 +69,7 @@ static const struct ieee80211_tpt_blink iwl_blink[] = { /* Set led register off */ void iwlagn_led_enable(struct iwl_priv *priv) { - iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TRUN_ON); + iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TURN_ON); } /* diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 34a5287..b419a1e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -381,8 +381,8 @@ /* LED */ #define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) -#define CSR_LED_REG_TRUN_ON (0x78) -#define CSR_LED_REG_TRUN_OFF (0x38) +#define CSR_LED_REG_TURN_ON (0x60) +#define CSR_LED_REG_TURN_OFF (0x20) /* ANA_PLL */ #define CSR50_ANA_PLL_CFG_VAL (0x00880300) -- cgit v0.10.2 From abae2386d55aff1d395cdb665f03684c227a6a69 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 31 Dec 2012 13:46:42 +0200 Subject: iwlwifi: always check that grab_nic_access succeeds This allows to let sparse check that the NIC access is always released. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 517d7ae..a64f361 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -354,7 +354,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&priv->trans->reg_lock, reg_flags); - if (unlikely(!iwl_trans_grab_nic_access(priv->trans, false))) { + if (!iwl_trans_grab_nic_access(priv->trans, false)) { spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); return; } @@ -1718,7 +1718,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&trans->reg_lock, reg_flags); - if (unlikely(!iwl_trans_grab_nic_access(trans, false))) + if (!iwl_trans_grab_nic_access(trans, false)) goto out_unlock; /* Set starting address; reads will auto-increment */ diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index a8ae513..b28cfc8 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -186,7 +186,7 @@ static void iwl_tt_check_exit_ct_kill(unsigned long data) } iwl_read32(priv->trans, CSR_UCODE_DRV_GP1); spin_lock_irqsave(&priv->trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(priv->trans, false))) + if (iwl_trans_grab_nic_access(priv->trans, false)) iwl_trans_release_nic_access(priv->trans); spin_unlock_irqrestore(&priv->trans->reg_lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index 2bd84ad..bff3ac9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -101,13 +101,14 @@ EXPORT_SYMBOL_GPL(iwl_poll_bit); u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg) { - u32 value; + u32 value = 0x5a5a5a5a; unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); - value = iwl_read32(trans, reg); - iwl_trans_release_nic_access(trans); + if (iwl_trans_grab_nic_access(trans, false)) { + value = iwl_read32(trans, reg); + iwl_trans_release_nic_access(trans); + } spin_unlock_irqrestore(&trans->reg_lock, flags); return value; @@ -119,7 +120,7 @@ void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, reg, value); iwl_trans_release_nic_access(trans); } @@ -159,12 +160,13 @@ static inline void __iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs) { unsigned long flags; - u32 val; + u32 val = 0x5a5a5a5a; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); - val = __iwl_read_prph(trans, ofs); - iwl_trans_release_nic_access(trans); + if (iwl_trans_grab_nic_access(trans, false)) { + val = __iwl_read_prph(trans, ofs); + iwl_trans_release_nic_access(trans); + } spin_unlock_irqrestore(&trans->reg_lock, flags); return val; } @@ -175,7 +177,7 @@ void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { __iwl_write_prph(trans, ofs, val); iwl_trans_release_nic_access(trans); } @@ -188,7 +190,7 @@ void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { __iwl_write_prph(trans, ofs, __iwl_read_prph(trans, ofs) | mask); iwl_trans_release_nic_access(trans); @@ -203,7 +205,7 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { __iwl_write_prph(trans, ofs, (__iwl_read_prph(trans, ofs) & mask) | bits); iwl_trans_release_nic_access(trans); @@ -218,7 +220,7 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) u32 val; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { val = __iwl_read_prph(trans, ofs); __iwl_write_prph(trans, ofs, (val & ~mask)); iwl_trans_release_nic_access(trans); diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index f8d8df8..1a22611 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -467,7 +467,10 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); + if (!iwl_trans_grab_nic_access(trans, false)) { + spin_unlock_irqrestore(&trans->reg_lock, flags); + return -EIO; + } iwl_write32(trans, HBUS_TARG_PRPH_RADDR, addr | (3 << 24)); for (i = 0; i < size; i += 4) @@ -500,26 +503,29 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { - /* Periphery writes can be 1-3 bytes long, or DWORDs */ - if (size < 4) { - memcpy(&val, buf, size); - spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); - iwl_write32(trans, HBUS_TARG_PRPH_WADDR, - (addr & 0x0000FFFF) | - ((size - 1) << 24)); - iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); - iwl_trans_release_nic_access(trans); - /* needed after consecutive writes w/o read */ - mmiowb(); + /* Periphery writes can be 1-3 bytes long, or DWORDs */ + if (size < 4) { + memcpy(&val, buf, size); + spin_lock_irqsave(&trans->reg_lock, flags); + if (!iwl_trans_grab_nic_access(trans, false)) { spin_unlock_irqrestore(&trans->reg_lock, flags); - } else { - if (size % 4) - return -EINVAL; - for (i = 0; i < size; i += 4) - iwl_write_prph(trans, addr+i, - *(u32 *)(buf+i)); + return -EIO; } + iwl_write32(trans, HBUS_TARG_PRPH_WADDR, + (addr & 0x0000FFFF) | + ((size - 1) << 24)); + iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); + iwl_trans_release_nic_access(trans); + /* needed after consecutive writes w/o read */ + mmiowb(); + spin_unlock_irqrestore(&trans->reg_lock, flags); + } else { + if (size % 4) + return -EINVAL; + for (i = 0; i < size; i += 4) + iwl_write_prph(trans, addr+i, + *(u32 *)(buf+i)); + } } else if (iwl_test_valid_hw_addr(tst, addr)) { iwl_trans_write_mem(trans, addr, buf, size / 4); } else { diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 7584d55..b0d5c71 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -734,15 +734,15 @@ static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) trans->ops->set_pmi(trans, state); } -static inline bool iwl_trans_grab_nic_access(struct iwl_trans *trans, - bool silent) -{ - return trans->ops->grab_nic_access(trans, silent); -} +#define iwl_trans_grab_nic_access(trans, silent) \ + __cond_lock(nic_access, \ + likely((trans)->ops->grab_nic_access(trans, silent))) -static inline void iwl_trans_release_nic_access(struct iwl_trans *trans) +static inline void __releases(nic_access) +iwl_trans_release_nic_access(struct iwl_trans *trans) { trans->ops->release_nic_access(trans); + __release(nic_access); } /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index bca6203..db3b055 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -795,7 +795,7 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); for (offs = 0; offs < dwords; offs++) vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); @@ -815,7 +815,7 @@ static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); -- cgit v0.10.2 From e7c3273ec2a04bbce27e0991c405fe6dc6811d7d Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:13 +0000 Subject: rtnl: use dev_set_mac_address() instead of plain ndo_ Benefit from existence of dev_set_mac_address() and remove duplicate code. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 2ef7a56..78d05a9 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1310,7 +1310,6 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, struct nlattr **tb, char *ifname, int modified) { const struct net_device_ops *ops = dev->netdev_ops; - int send_addr_notify = 0; int err; if (tb[IFLA_NET_NS_PID] || tb[IFLA_NET_NS_FD]) { @@ -1363,16 +1362,6 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, struct sockaddr *sa; int len; - if (!ops->ndo_set_mac_address) { - err = -EOPNOTSUPP; - goto errout; - } - - if (!netif_device_present(dev)) { - err = -ENODEV; - goto errout; - } - len = sizeof(sa_family_t) + dev->addr_len; sa = kmalloc(len, GFP_KERNEL); if (!sa) { @@ -1382,13 +1371,11 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, sa->sa_family = dev->type; memcpy(sa->sa_data, nla_data(tb[IFLA_ADDRESS]), dev->addr_len); - err = ops->ndo_set_mac_address(dev, sa); + err = dev_set_mac_address(dev, sa); kfree(sa); if (err) goto errout; - send_addr_notify = 1; modified = 1; - add_device_randomness(dev->dev_addr, dev->addr_len); } if (tb[IFLA_MTU]) { @@ -1425,7 +1412,7 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, if (tb[IFLA_BROADCAST]) { nla_memcpy(dev->broadcast, tb[IFLA_BROADCAST], dev->addr_len); - send_addr_notify = 1; + call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); } if (ifm->ifi_flags || ifm->ifi_change) { @@ -1546,9 +1533,6 @@ errout: net_warn_ratelimited("A link change request failed with some changes committed already. Interface %s may have been left with an inconsistent configuration, please check.\n", dev->name); - if (send_addr_notify) - call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); - return err; } -- cgit v0.10.2 From f652151640344f8faee21fcf702b4fd46b8fe70b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:14 +0000 Subject: net: call add_device_randomness() only after successful mac change Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 21c5b97..c85e32b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5020,10 +5020,11 @@ int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa) if (!netif_device_present(dev)) return -ENODEV; err = ops->ndo_set_mac_address(dev, sa); - if (!err) - call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); + if (err) + return err; + call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); add_device_randomness(dev->dev_addr, dev->addr_len); - return err; + return 0; } EXPORT_SYMBOL(dev_set_mac_address); -- cgit v0.10.2 From e41b2d7fe7803e85e1202d0eb172717d7bf1bbaf Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:15 +0000 Subject: net: set dev->addr_assign_type correctly Not a bitfield, but a plain value. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 56d3f69..17651c7 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2540,7 +2540,7 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } if (atl1c_read_mac_addr(&adapter->hw)) { /* got a random MAC address, set NET_ADDR_RANDOM to netdev */ - netdev->addr_assign_type |= NET_ADDR_RANDOM; + netdev->addr_assign_type = NET_ADDR_RANDOM; } memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 71b3d7d..5b0d993 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -3053,7 +3053,7 @@ static int atl1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* copy the MAC address out of the EEPROM */ if (atl1_read_mac_addr(&adapter->hw)) { /* mark random mac */ - netdev->addr_assign_type |= NET_ADDR_RANDOM; + netdev->addr_assign_type = NET_ADDR_RANDOM; } memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 8db1c06..f380bb7 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -1068,7 +1068,7 @@ static int ethoc_probe(struct platform_device *pdev) } if (random_mac) - netdev->addr_assign_type |= NET_ADDR_RANDOM; + netdev->addr_assign_type = NET_ADDR_RANDOM; /* register MII bus */ priv->mdio = mdiobus_alloc(); diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index c124e67..cd3d2c0 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -655,7 +655,7 @@ ltq_etop_init(struct net_device *dev) /* Set addr_assign_type here, ltq_etop_set_mac_address would reset it. */ if (random_mac) - dev->addr_assign_type |= NET_ADDR_RANDOM; + dev->addr_assign_type = NET_ADDR_RANDOM; ltq_etop_set_multicast_list(dev); err = ltq_etop_mdio_init(dev); diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 243eea1..1a43e1b 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -192,7 +192,7 @@ static inline void eth_zero_addr(u8 *addr) */ static inline void eth_hw_addr_random(struct net_device *dev) { - dev->addr_assign_type |= NET_ADDR_RANDOM; + dev->addr_assign_type = NET_ADDR_RANDOM; eth_random_addr(dev->dev_addr); } -- cgit v0.10.2 From fbdeca2d7753aa1ab929aeb77ccc46489eed02b9 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:16 +0000 Subject: net: add address assign type "SET" This is the way to indicate that mac address of a device has been set by dev_set_mac_address() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 6835b58..c5031a4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -64,6 +64,8 @@ struct wireless_dev; #define NET_ADDR_PERM 0 /* address is permanent (default) */ #define NET_ADDR_RANDOM 1 /* address is generated randomly */ #define NET_ADDR_STOLEN 2 /* address is stolen from other device */ +#define NET_ADDR_SET 3 /* address is set using + * dev_set_mac_address() */ /* Backlog congestion levels */ #define NET_RX_SUCCESS 0 /* keep 'em coming, baby */ diff --git a/net/core/dev.c b/net/core/dev.c index c85e32b..bddb2f2 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5022,6 +5022,7 @@ int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa) err = ops->ndo_set_mac_address(dev, sa); if (err) return err; + dev->addr_assign_type = NET_ADDR_SET; call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); add_device_randomness(dev->dev_addr, dev->addr_len); return 0; -- cgit v0.10.2 From 15c6ff3bc0ff3464a8c7efcdea09c86454571622 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:17 +0000 Subject: net: remove unnecessary NET_ADDR_RANDOM "bitclean" NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c index c1fdb8b..8c3c9cf 100644 --- a/drivers/net/ethernet/adi/bfin_mac.c +++ b/drivers/net/ethernet/adi/bfin_mac.c @@ -647,7 +647,6 @@ static int bfin_mac_set_mac_address(struct net_device *dev, void *p) if (netif_running(dev)) return -EBUSY; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; setup_mac_addr(dev->dev_addr); return 0; } diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 17651c7..7af95ce 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -472,7 +472,6 @@ static int atl1c_set_mac_addr(struct net_device *netdev, void *p) memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.mac_addr); diff --git a/drivers/net/ethernet/atheros/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c index 77ffbc4..f82eb16 100644 --- a/drivers/net/ethernet/atheros/atlx/atlx.c +++ b/drivers/net/ethernet/atheros/atlx/atlx.c @@ -84,7 +84,6 @@ static int atlx_set_mac(struct net_device *netdev, void *p) memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; atlx_set_mac_addr(&adapter->hw); return 0; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index f9a15cb..d17fa5a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3904,7 +3904,6 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p) return rc; } - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); if (netif_running(dev)) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index b407043..a345e24 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1459,7 +1459,6 @@ static int xgmac_set_mac_address(struct net_device *dev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); xgmac_set_mac_addr(ioaddr, dev->dev_addr, 0); diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 64866ff..ebccebf 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -865,7 +865,6 @@ static int enic_set_mac_addr(struct net_device *netdev, char *addr) } memcpy(netdev->dev_addr, addr, netdev->addr_len); - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index f380bb7..b93062d 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -784,7 +784,6 @@ static int ethoc_set_mac_address(struct net_device *dev, void *addr) ethoc_write(priv, MAC_ADDR1, (mac[0] << 8) | (mac[1] << 0)); memcpy(dev->dev_addr, mac, ETH_ALEN); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 277f5df..53281ff 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1738,7 +1738,6 @@ static int igbvf_set_mac(struct net_device *netdev, void *p) return -EADDRNOTAVAIL; memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 10d678d..aa037ca 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -627,7 +627,6 @@ static int pxa168_eth_set_mac_address(struct net_device *dev, void *addr) if (!is_valid_ether_addr(sa->sa_data)) return -EADDRNOTAVAIL; memcpy(oldMac, dev->dev_addr, ETH_ALEN); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN); netif_addr_lock_bh(dev); update_hash_table_mac_address(pep, oldMac, dev->dev_addr); diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c index b71eb39..fbcb9e7 100644 --- a/drivers/net/ethernet/micrel/ks8842.c +++ b/drivers/net/ethernet/micrel/ks8842.c @@ -1080,7 +1080,6 @@ static int ks8842_set_mac(struct net_device *netdev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(netdev->dev_addr, mac, netdev->addr_len); ks8842_write_mac_addr(adapter, mac); diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index 286816a..d59bc0e 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1052,7 +1052,6 @@ static int ks8851_set_mac_address(struct net_device *dev, void *addr) if (!is_valid_ether_addr(sa->sa_data)) return -EADDRNOTAVAIL; - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN); return ks8851_write_mac_addr(dev); } diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c index ef8f9f9..a343066 100644 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ b/drivers/net/ethernet/micrel/ks8851_mll.c @@ -1237,7 +1237,6 @@ static int ks_set_mac_address(struct net_device *netdev, void *paddr) struct sockaddr *addr = paddr; u8 *da; - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); da = (u8 *)netdev->dev_addr; diff --git a/drivers/net/ethernet/microchip/enc28j60.c b/drivers/net/ethernet/microchip/enc28j60.c index a99456c..5d98a9f 100644 --- a/drivers/net/ethernet/microchip/enc28j60.c +++ b/drivers/net/ethernet/microchip/enc28j60.c @@ -527,7 +527,6 @@ static int enc28j60_set_mac_address(struct net_device *dev, void *addr) if (!is_valid_ether_addr(address->sa_data)) return -EADDRNOTAVAIL; - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, address->sa_data, dev->addr_len); return enc28j60_set_hw_macaddr(dev); } diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 653487d..b53bf9d 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -3025,7 +3025,6 @@ static int nv_set_mac_address(struct net_device *dev, void *addr) /* synchronized against open : rtnl_lock() held by caller */ memcpy(dev->dev_addr, macaddr->sa_data, ETH_ALEN); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; if (netif_running(dev)) { netif_tx_lock_bh(dev); diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index b549919..b4a842c 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -1534,12 +1534,10 @@ static int octeon_mgmt_probe(struct platform_device *pdev) mac = of_get_mac_address(pdev->dev.of_node); - if (mac && is_valid_ether_addr(mac)) { + if (mac && is_valid_ether_addr(mac)) memcpy(netdev->dev_addr, mac, ETH_ALEN); - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; - } else { + else eth_hw_addr_random(netdev); - } p->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index e112877..04ff63c 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1831,7 +1831,6 @@ static int smsc911x_set_mac_address(struct net_device *dev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); spin_lock_irq(&pdata->mac_lock); diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 2a3e2c5..6841a22 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1264,7 +1264,6 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) /* Store mac addr in priv and rx channel and set it in EMAC hw */ memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); - ndev->addr_assign_type &= ~NET_ADDR_RANDOM; /* MAC address is configured only after the interface is enabled. */ if (netif_running(ndev)) { diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 96070e9..3643549 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -2195,7 +2195,6 @@ static int tile_net_set_mac_address(struct net_device *dev, void *p) /* ISSUE: Note that "dev_addr" is now a pointer. */ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c index 3523838..545043c 100644 --- a/drivers/net/ethernet/wiznet/w5100.c +++ b/drivers/net/ethernet/wiznet/w5100.c @@ -570,7 +570,6 @@ static int w5100_set_macaddr(struct net_device *ndev, void *addr) if (!is_valid_ether_addr(sock_addr->sa_data)) return -EADDRNOTAVAIL; memcpy(ndev->dev_addr, sock_addr->sa_data, ETH_ALEN); - ndev->addr_assign_type &= ~NET_ADDR_RANDOM; w5100_write_macaddr(priv); return 0; } diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c index 9d1d986..7cbd0e6 100644 --- a/drivers/net/ethernet/wiznet/w5300.c +++ b/drivers/net/ethernet/wiznet/w5300.c @@ -490,7 +490,6 @@ static int w5300_set_macaddr(struct net_device *ndev, void *addr) if (!is_valid_ether_addr(sock_addr->sa_data)) return -EADDRNOTAVAIL; memcpy(ndev->dev_addr, sock_addr->sa_data, ETH_ALEN); - ndev->addr_assign_type &= ~NET_ADDR_RANDOM; w5300_write_macaddr(priv); return 0; } diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 68a43fe..80c6f92 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -375,7 +375,6 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p) if (!(dev->flags & IFF_UP)) { /* Just copy in the new address */ - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); } else { /* Rehash and update the device filters */ diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 78c7d87..2ea4f0e 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1500,7 +1500,6 @@ static int team_set_mac_address(struct net_device *dev, void *p) if (dev->type == ARPHRD_ETHER && !is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; rcu_read_lock(); list_for_each_entry_rcu(port, &team->port_list, list) if (team->ops.port_change_dev_addr) @@ -1770,7 +1769,6 @@ static void team_setup_by_port(struct net_device *dev, dev->mtu = port_dev->mtu; memcpy(dev->broadcast, port_dev->broadcast, port_dev->addr_len); memcpy(dev->dev_addr, port_dev->dev_addr, port_dev->addr_len); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; } static int team_dev_type_check_change(struct net_device *dev, diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index ef32dc1..9a2ec25 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -453,12 +453,10 @@ int cvm_oct_common_init(struct net_device *dev) if (priv->of_node) mac = of_get_mac_address(priv->of_node); - if (mac && is_valid_ether_addr(mac)) { + if (mac && is_valid_ether_addr(mac)) memcpy(dev->dev_addr, mac, ETH_ALEN); - dev->addr_assign_type &= ~NET_ADDR_RANDOM; - } else { + else eth_hw_addr_random(dev); - } /* * Force the interface to use the POW send if always_use_pow diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 6b548fd..fa388b2 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -124,7 +124,6 @@ static int batadv_interface_set_mac_addr(struct net_device *dev, void *p) batadv_tt_local_add(dev, addr->sa_data, BATADV_NULL_IFINDEX); } - dev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 7c78e26..38974f7 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -172,7 +172,6 @@ static int br_set_mac_address(struct net_device *dev, void *p) spin_lock_bh(&br->lock); if (!ether_addr_equal(dev->dev_addr, addr->sa_data)) { - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); br_fdb_change_mac_address(br, addr->sa_data); br_stp_change_bridge_id(br, addr->sa_data); diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index 4efad53..bc39c8c 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -290,8 +290,6 @@ int eth_mac_addr(struct net_device *dev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); - /* if device marked as NET_ADDR_RANDOM, reset it */ - dev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } EXPORT_SYMBOL(eth_mac_addr); diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c index 5d460c3..44cd5c3 100644 --- a/net/openvswitch/vport-internal_dev.c +++ b/net/openvswitch/vport-internal_dev.c @@ -69,7 +69,6 @@ static int internal_dev_mac_addr(struct net_device *dev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - dev->addr_assign_type &= ~NET_ADDR_RANDOM; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); return 0; } -- cgit v0.10.2 From 646cbcdae50e9ef40d7b77673a1f1b7eb7c18be5 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:18 +0000 Subject: um: net: use eth_hw_addr_random() to generate random mac Also remove unused "mac" from uml_net struct. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index b1314eb..fd9090d 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -293,8 +293,9 @@ static void uml_net_user_timer_expire(unsigned long _conn) #endif } -static int setup_etheraddr(char *str, unsigned char *addr, char *name) +static void setup_etheraddr(struct net_device *dev, char *str) { + unsigned char *addr = dev->dev_addr; char *end; int i; @@ -334,13 +335,12 @@ static int setup_etheraddr(char *str, unsigned char *addr, char *name) addr[0] | 0x02, addr[1], addr[2], addr[3], addr[4], addr[5]); } - return 0; + return; random: printk(KERN_INFO - "Choosing a random ethernet address for device %s\n", name); - eth_random_addr(addr); - return 1; + "Choosing a random ethernet address for device %s\n", dev->name); + eth_hw_addr_random(dev); } static DEFINE_SPINLOCK(devices_lock); @@ -392,7 +392,6 @@ static void eth_configure(int n, void *init, char *mac, struct net_device *dev; struct uml_net_private *lp; int err, size; - int random_mac; size = transport->private_size + sizeof(struct uml_net_private); @@ -419,9 +418,9 @@ static void eth_configure(int n, void *init, char *mac, */ snprintf(dev->name, sizeof(dev->name), "eth%d", n); - random_mac = setup_etheraddr(mac, device->mac, dev->name); + setup_etheraddr(dev, mac); - printk(KERN_INFO "Netdevice %d (%pM) : ", n, device->mac); + printk(KERN_INFO "Netdevice %d (%pM) : ", n, dev->dev_addr); lp = netdev_priv(dev); /* This points to the transport private data. It's still clear, but we @@ -468,17 +467,12 @@ static void eth_configure(int n, void *init, char *mac, init_timer(&lp->tl); spin_lock_init(&lp->lock); lp->tl.function = uml_net_user_timer_expire; - memcpy(lp->mac, device->mac, sizeof(lp->mac)); + memcpy(lp->mac, dev->dev_addr, sizeof(lp->mac)); if ((transport->user->init != NULL) && ((*transport->user->init)(&lp->user, dev) != 0)) goto out_unregister; - /* don't use eth_mac_addr, it will not work here */ - memcpy(dev->dev_addr, device->mac, ETH_ALEN); - if (random_mac) - dev->addr_assign_type |= NET_ADDR_RANDOM; - dev->mtu = transport->user->mtu; dev->netdev_ops = ¨_netdev_ops; dev->ethtool_ops = ¨_net_ethtool_ops; diff --git a/arch/um/include/shared/net_kern.h b/arch/um/include/shared/net_kern.h index 5c367f2..012ac87 100644 --- a/arch/um/include/shared/net_kern.h +++ b/arch/um/include/shared/net_kern.h @@ -18,7 +18,6 @@ struct uml_net { struct net_device *dev; struct platform_device pdev; int index; - unsigned char mac[ETH_ALEN]; }; struct uml_net_private { -- cgit v0.10.2 From 04e406dcc54cfd84d333ea673fa986fb5a1840e7 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 1 Jan 2013 03:30:19 +0000 Subject: ll_temac: fix mac address setting Previously, when invalid address was passed to ndo_set_mac_address, random mac was generated and set. Fix this by returning -EADDRNOTAVAIL in this situation. Also polish the code around a bit. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index aad909d..5022093 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -319,18 +319,10 @@ out: * net_device_ops */ -static int temac_set_mac_address(struct net_device *ndev, void *address) +static void temac_do_set_mac_address(struct net_device *ndev) { struct temac_local *lp = netdev_priv(ndev); - if (address) - memcpy(ndev->dev_addr, address, ETH_ALEN); - - if (!is_valid_ether_addr(ndev->dev_addr)) - eth_hw_addr_random(ndev); - else - ndev->addr_assign_type &= ~NET_ADDR_RANDOM; - /* set up unicast MAC address filter set its mac address */ mutex_lock(&lp->indirect_mutex); temac_indirect_out32(lp, XTE_UAW0_OFFSET, @@ -344,15 +336,26 @@ static int temac_set_mac_address(struct net_device *ndev, void *address) (ndev->dev_addr[4] & 0x000000ff) | (ndev->dev_addr[5] << 8)); mutex_unlock(&lp->indirect_mutex); +} +static int temac_init_mac_address(struct net_device *ndev, void *address) +{ + memcpy(ndev->dev_addr, address, ETH_ALEN); + if (!is_valid_ether_addr(ndev->dev_addr)) + eth_hw_addr_random(ndev); + temac_do_set_mac_address(ndev); return 0; } -static int netdev_set_mac_address(struct net_device *ndev, void *p) +static int temac_set_mac_address(struct net_device *ndev, void *p) { struct sockaddr *addr = p; - return temac_set_mac_address(ndev, addr->sa_data); + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + memcpy(ndev->dev_addr, addr->sa_data, ETH_ALEN); + temac_do_set_mac_address(ndev); + return 0; } static void temac_set_multicast_list(struct net_device *ndev) @@ -579,7 +582,7 @@ static void temac_device_reset(struct net_device *ndev) temac_setoptions(ndev, lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN)); - temac_set_mac_address(ndev, NULL); + temac_do_set_mac_address(ndev); /* Set address filter table */ temac_set_multicast_list(ndev); @@ -938,7 +941,7 @@ static const struct net_device_ops temac_netdev_ops = { .ndo_open = temac_open, .ndo_stop = temac_stop, .ndo_start_xmit = temac_start_xmit, - .ndo_set_mac_address = netdev_set_mac_address, + .ndo_set_mac_address = temac_set_mac_address, .ndo_validate_addr = eth_validate_addr, .ndo_do_ioctl = temac_ioctl, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -1106,7 +1109,7 @@ static int temac_of_probe(struct platform_device *op) rc = -ENODEV; goto err_iounmap_2; } - temac_set_mac_address(ndev, (void *)addr); + temac_init_mac_address(ndev, (void *)addr); rc = temac_mdio_setup(lp, op->dev.of_node); if (rc) -- cgit v0.10.2 From 75ea719cb4773b05cc48e741feb4e267522b9656 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 3 Jan 2013 00:09:46 -0500 Subject: mac80211: fix mesh_hwmp kerneldoc One of the function names was wrong and some parameters were missing. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 47aeee2..9044296 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -219,12 +219,14 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, } /** - * mesh_send_path error - Sends a PERR mesh management frame + * mesh_path_error_tx - Sends a PERR mesh management frame * + * @ttl: allowed remaining hops * @target: broken destination * @target_sn: SN of the broken destination * @target_rcode: reason code for this PERR * @ra: node this frame is addressed to + * @sdata: local mesh subif * * Note: This function may be called with driver locks taken that the driver * also acquires in the TX path. To avoid a deadlock we don't transmit the @@ -350,6 +352,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * @sdata: local mesh subif * @mgmt: mesh management frame * @hwmp_ie: hwmp information element (PREP or PREQ) + * @action: type of hwmp ie * * This function updates the path routing information to the originator and the * transmitter of a HWMP PREQ or PREP frame. -- cgit v0.10.2 From 45034bfb8c9ecc62db40b438bea7fe728ac8facf Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 2 Jan 2013 14:55:16 -0800 Subject: mac80211_hwsim: fix tsf adjustment Make hwsim TSF offset adjustments cumulative and relative to the fake PHY TSF. Now adding 1000us, then adding -1000us doesn't result in a tsf_offset of -1000. Also the beacon timestamp can now correctly be expressed as (tsf + data->tsf_offset), which will be done in a later patch. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index d248a4c..807d713 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -361,7 +361,7 @@ struct mac80211_hwsim_data { int power_level; /* difference between this hw's clock and the real clock, in usecs */ - u64 tsf_offset; + s64 tsf_offset; }; @@ -427,9 +427,10 @@ static void mac80211_hwsim_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf) { struct mac80211_hwsim_data *data = hw->priv; - struct timeval tv = ktime_to_timeval(ktime_get_real()); - u64 now = tv.tv_sec * USEC_PER_SEC + tv.tv_usec; - data->tsf_offset = tsf - now; + u64 now = mac80211_hwsim_get_tsf(hw, vif); + s64 delta = tsf - now; + + data->tsf_offset += delta; } static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw, -- cgit v0.10.2 From 01e59e467ecf976c782eecd4dc99644802cc60e2 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 2 Jan 2013 14:55:17 -0800 Subject: mac80211_hwsim: hrtimer beacon For testing various timing-sensitive protocols (power save, MBCA, etc.), a beacon accuracy of jiffies is not sufficient. A tasklet_hrtimer is used for the beacon since it runs the callback in soft-IRQ context with hrtimer resolution. Also handle BSS_CHANGED_BEACON_ENABLED for hwsim. Signed-off-by: Thomas Pedersen [simplify timer container_of] Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 807d713..c54c5d1 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -337,11 +337,11 @@ struct mac80211_hwsim_data { int scan_chan_idx; struct ieee80211_channel *channel; - unsigned long beacon_int; /* in jiffies unit */ + u64 beacon_int /* beacon interval in us */; unsigned int rx_filter; bool started, idle, scanning; struct mutex mutex; - struct timer_list beacon_timer; + struct tasklet_hrtimer beacon_timer; enum ps_mode { PS_DISABLED, PS_ENABLED, PS_AUTO_POLL, PS_MANUAL_POLL } ps; @@ -917,7 +917,7 @@ static void mac80211_hwsim_stop(struct ieee80211_hw *hw) { struct mac80211_hwsim_data *data = hw->priv; data->started = false; - del_timer(&data->beacon_timer); + tasklet_hrtimer_cancel(&data->beacon_timer); wiphy_debug(hw->wiphy, "%s\n", __func__); } @@ -1001,21 +1001,28 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, rcu_dereference(vif->chanctx_conf)->def.chan); } - -static void mac80211_hwsim_beacon(unsigned long arg) +static enum hrtimer_restart +mac80211_hwsim_beacon(struct hrtimer *timer) { - struct ieee80211_hw *hw = (struct ieee80211_hw *) arg; - struct mac80211_hwsim_data *data = hw->priv; + struct mac80211_hwsim_data *data = + container_of(timer, struct mac80211_hwsim_data, + beacon_timer.timer); + struct ieee80211_hw *hw = data->hw; + u64 bcn_int = data->beacon_int; + ktime_t next_bcn; if (!data->started) - return; + goto out; ieee80211_iterate_active_interfaces_atomic( hw, IEEE80211_IFACE_ITER_NORMAL, mac80211_hwsim_beacon_tx, hw); - data->beacon_timer.expires = jiffies + data->beacon_int; - add_timer(&data->beacon_timer); + next_bcn = ktime_add(hrtimer_get_expires(timer), + ns_to_ktime(bcn_int * 1000)); + tasklet_hrtimer_start(&data->beacon_timer, next_bcn, HRTIMER_MODE_ABS); +out: + return HRTIMER_NORESTART; } static const char *hwsim_chantypes[] = { @@ -1053,9 +1060,12 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) data->power_level = conf->power_level; if (!data->started || !data->beacon_int) - del_timer(&data->beacon_timer); - else - mod_timer(&data->beacon_timer, jiffies + data->beacon_int); + tasklet_hrtimer_cancel(&data->beacon_timer); + else if (!hrtimer_is_queued(&data->beacon_timer.timer)) { + tasklet_hrtimer_start(&data->beacon_timer, + ns_to_ktime(data->beacon_int * 1000), + HRTIMER_MODE_REL); + } return 0; } @@ -1105,12 +1115,22 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_BEACON_INT) { wiphy_debug(hw->wiphy, " BCNINT: %d\n", info->beacon_int); - data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000; - if (WARN_ON(!data->beacon_int)) - data->beacon_int = 1; - if (data->started) - mod_timer(&data->beacon_timer, - jiffies + data->beacon_int); + data->beacon_int = info->beacon_int * 1024; + } + + if (changed & BSS_CHANGED_BEACON_ENABLED) { + wiphy_debug(hw->wiphy, " BCN EN: %d\n", info->enable_beacon); + if (data->started && + !hrtimer_is_queued(&data->beacon_timer.timer) && + info->enable_beacon) { + if (WARN_ON(!data->beacon_int)) + data->beacon_int = 1000 * 1024; + tasklet_hrtimer_start(&data->beacon_timer, + ns_to_ktime(data->beacon_int * + 1000), + HRTIMER_MODE_REL); + } else if (!info->enable_beacon) + tasklet_hrtimer_cancel(&data->beacon_timer); } if (changed & BSS_CHANGED_ERP_CTS_PROT) { @@ -2393,8 +2413,9 @@ static int __init init_mac80211_hwsim(void) data->debugfs, data, &hwsim_fops_group); - setup_timer(&data->beacon_timer, mac80211_hwsim_beacon, - (unsigned long) hw); + tasklet_hrtimer_init(&data->beacon_timer, + mac80211_hwsim_beacon, + CLOCK_REALTIME, HRTIMER_MODE_ABS); list_add_tail(&data->list, &hwsim_radios); } -- cgit v0.10.2 From c51f878379b1d0677619798b1d9358d053bdbdb1 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 2 Jan 2013 14:55:18 -0800 Subject: mac80211_hwsim: fix beacon timing A beacon period starts at TSF time 0. Spoof this by rounding the starting beacon time to a multiple of the beacon interval, and keep TBTT aligned on TSF adjustment. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index c54c5d1..b6e2caa 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -362,6 +362,7 @@ struct mac80211_hwsim_data { /* difference between this hw's clock and the real clock, in usecs */ s64 tsf_offset; + s64 bcn_delta; }; @@ -428,9 +429,12 @@ static void mac80211_hwsim_set_tsf(struct ieee80211_hw *hw, { struct mac80211_hwsim_data *data = hw->priv; u64 now = mac80211_hwsim_get_tsf(hw, vif); + u32 bcn_int = data->beacon_int; s64 delta = tsf - now; data->tsf_offset += delta; + /* adjust after beaconing with new timestamp at old TBTT */ + data->bcn_delta = do_div(delta, bcn_int); } static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw, @@ -1018,6 +1022,12 @@ mac80211_hwsim_beacon(struct hrtimer *timer) hw, IEEE80211_IFACE_ITER_NORMAL, mac80211_hwsim_beacon_tx, hw); + /* beacon at new TBTT + beacon interval */ + if (data->bcn_delta) { + bcn_int -= data->bcn_delta; + data->bcn_delta = 0; + } + next_bcn = ktime_add(hrtimer_get_expires(timer), ns_to_ktime(bcn_int * 1000)); tasklet_hrtimer_start(&data->beacon_timer, next_bcn, HRTIMER_MODE_ABS); @@ -1062,8 +1072,12 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) if (!data->started || !data->beacon_int) tasklet_hrtimer_cancel(&data->beacon_timer); else if (!hrtimer_is_queued(&data->beacon_timer.timer)) { + u64 tsf = mac80211_hwsim_get_tsf(hw, NULL); + u32 bcn_int = data->beacon_int; + u64 until_tbtt = bcn_int - do_div(tsf, bcn_int); + tasklet_hrtimer_start(&data->beacon_timer, - ns_to_ktime(data->beacon_int * 1000), + ns_to_ktime(until_tbtt * 1000), HRTIMER_MODE_REL); } @@ -1123,11 +1137,15 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, if (data->started && !hrtimer_is_queued(&data->beacon_timer.timer) && info->enable_beacon) { + u64 tsf, until_tbtt; + u32 bcn_int; if (WARN_ON(!data->beacon_int)) data->beacon_int = 1000 * 1024; + tsf = mac80211_hwsim_get_tsf(hw, vif); + bcn_int = data->beacon_int; + until_tbtt = bcn_int - do_div(tsf, bcn_int); tasklet_hrtimer_start(&data->beacon_timer, - ns_to_ktime(data->beacon_int * - 1000), + ns_to_ktime(until_tbtt * 1000), HRTIMER_MODE_REL); } else if (!info->enable_beacon) tasklet_hrtimer_cancel(&data->beacon_timer); -- cgit v0.10.2 From 9ff162a8b96c96238773972e26288a366e403b0c Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:49 +0000 Subject: net: introduce upper device lists This lists are supposed to serve for storing pointers to all upper devices. Eventually it will replace dev->master pointer which is used for bonding, bridge, team but it cannot be used for vlan, macvlan where there might be multiple upper present. In case the upper link is replacement for dev->master, it is marked with "master" flag. New upper device list resolves this limitation. Also, the information stored in lists is used for preventing looping setups like "bond->somethingelse->samebond" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c5031a4..e324601 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1174,6 +1174,8 @@ struct net_device { * which this device is member of. */ + struct list_head upper_dev_list; /* List of upper devices */ + /* Interface address info used in eth_type_trans() */ unsigned char *dev_addr; /* hw address, (before bcast because most packets are @@ -2636,6 +2638,18 @@ extern int netdev_max_backlog; extern int netdev_tstamp_prequeue; extern int weight_p; extern int bpf_jit_enable; + +extern bool netdev_has_upper_dev(struct net_device *dev, + struct net_device *upper_dev); +extern bool netdev_has_any_upper_dev(struct net_device *dev); +extern struct net_device *netdev_master_upper_dev_get(struct net_device *dev); +extern struct net_device *netdev_master_upper_dev_get_rcu(struct net_device *dev); +extern int netdev_upper_dev_link(struct net_device *dev, + struct net_device *upper_dev); +extern int netdev_master_upper_dev_link(struct net_device *dev, + struct net_device *upper_dev); +extern void netdev_upper_dev_unlink(struct net_device *dev, + struct net_device *upper_dev); extern int netdev_set_master(struct net_device *dev, struct net_device *master); extern int netdev_set_bond_master(struct net_device *dev, struct net_device *master); diff --git a/net/core/dev.c b/net/core/dev.c index bddb2f2..53a9fef 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4600,6 +4600,232 @@ static int __init dev_proc_init(void) #endif /* CONFIG_PROC_FS */ +struct netdev_upper { + struct net_device *dev; + bool master; + struct list_head list; + struct rcu_head rcu; + struct list_head search_list; +}; + +static void __append_search_uppers(struct list_head *search_list, + struct net_device *dev) +{ + struct netdev_upper *upper; + + list_for_each_entry(upper, &dev->upper_dev_list, list) { + /* check if this upper is not already in search list */ + if (list_empty(&upper->search_list)) + list_add_tail(&upper->search_list, search_list); + } +} + +static bool __netdev_search_upper_dev(struct net_device *dev, + struct net_device *upper_dev) +{ + LIST_HEAD(search_list); + struct netdev_upper *upper; + struct netdev_upper *tmp; + bool ret = false; + + __append_search_uppers(&search_list, dev); + list_for_each_entry(upper, &search_list, search_list) { + if (upper->dev == upper_dev) { + ret = true; + break; + } + __append_search_uppers(&search_list, upper->dev); + } + list_for_each_entry_safe(upper, tmp, &search_list, search_list) + INIT_LIST_HEAD(&upper->search_list); + return ret; +} + +static struct netdev_upper *__netdev_find_upper(struct net_device *dev, + struct net_device *upper_dev) +{ + struct netdev_upper *upper; + + list_for_each_entry(upper, &dev->upper_dev_list, list) { + if (upper->dev == upper_dev) + return upper; + } + return NULL; +} + +/** + * netdev_has_upper_dev - Check if device is linked to an upper device + * @dev: device + * @upper_dev: upper device to check + * + * Find out if a device is linked to specified upper device and return true + * in case it is. Note that this checks only immediate upper device, + * not through a complete stack of devices. The caller must hold the RTNL lock. + */ +bool netdev_has_upper_dev(struct net_device *dev, + struct net_device *upper_dev) +{ + ASSERT_RTNL(); + + return __netdev_find_upper(dev, upper_dev); +} +EXPORT_SYMBOL(netdev_has_upper_dev); + +/** + * netdev_has_any_upper_dev - Check if device is linked to some device + * @dev: device + * + * Find out if a device is linked to an upper device and return true in case + * it is. The caller must hold the RTNL lock. + */ +bool netdev_has_any_upper_dev(struct net_device *dev) +{ + ASSERT_RTNL(); + + return !list_empty(&dev->upper_dev_list); +} +EXPORT_SYMBOL(netdev_has_any_upper_dev); + +/** + * netdev_master_upper_dev_get - Get master upper device + * @dev: device + * + * Find a master upper device and return pointer to it or NULL in case + * it's not there. The caller must hold the RTNL lock. + */ +struct net_device *netdev_master_upper_dev_get(struct net_device *dev) +{ + struct netdev_upper *upper; + + ASSERT_RTNL(); + + if (list_empty(&dev->upper_dev_list)) + return NULL; + + upper = list_first_entry(&dev->upper_dev_list, + struct netdev_upper, list); + if (likely(upper->master)) + return upper->dev; + return NULL; +} +EXPORT_SYMBOL(netdev_master_upper_dev_get); + +/** + * netdev_master_upper_dev_get_rcu - Get master upper device + * @dev: device + * + * Find a master upper device and return pointer to it or NULL in case + * it's not there. The caller must hold the RCU read lock. + */ +struct net_device *netdev_master_upper_dev_get_rcu(struct net_device *dev) +{ + struct netdev_upper *upper; + + upper = list_first_or_null_rcu(&dev->upper_dev_list, + struct netdev_upper, list); + if (upper && likely(upper->master)) + return upper->dev; + return NULL; +} +EXPORT_SYMBOL(netdev_master_upper_dev_get_rcu); + +static int __netdev_upper_dev_link(struct net_device *dev, + struct net_device *upper_dev, bool master) +{ + struct netdev_upper *upper; + + ASSERT_RTNL(); + + if (dev == upper_dev) + return -EBUSY; + + /* To prevent loops, check if dev is not upper device to upper_dev. */ + if (__netdev_search_upper_dev(upper_dev, dev)) + return -EBUSY; + + if (__netdev_find_upper(dev, upper_dev)) + return -EEXIST; + + if (master && netdev_master_upper_dev_get(dev)) + return -EBUSY; + + upper = kmalloc(sizeof(*upper), GFP_KERNEL); + if (!upper) + return -ENOMEM; + + upper->dev = upper_dev; + upper->master = master; + INIT_LIST_HEAD(&upper->search_list); + + /* Ensure that master upper link is always the first item in list. */ + if (master) + list_add_rcu(&upper->list, &dev->upper_dev_list); + else + list_add_tail_rcu(&upper->list, &dev->upper_dev_list); + dev_hold(upper_dev); + + return 0; +} + +/** + * netdev_upper_dev_link - Add a link to the upper device + * @dev: device + * @upper_dev: new upper device + * + * Adds a link to device which is upper to this one. The caller must hold + * the RTNL lock. On a failure a negative errno code is returned. + * On success the reference counts are adjusted and the function + * returns zero. + */ +int netdev_upper_dev_link(struct net_device *dev, + struct net_device *upper_dev) +{ + return __netdev_upper_dev_link(dev, upper_dev, false); +} +EXPORT_SYMBOL(netdev_upper_dev_link); + +/** + * netdev_master_upper_dev_link - Add a master link to the upper device + * @dev: device + * @upper_dev: new upper device + * + * Adds a link to device which is upper to this one. In this case, only + * one master upper device can be linked, although other non-master devices + * might be linked as well. The caller must hold the RTNL lock. + * On a failure a negative errno code is returned. On success the reference + * counts are adjusted and the function returns zero. + */ +int netdev_master_upper_dev_link(struct net_device *dev, + struct net_device *upper_dev) +{ + return __netdev_upper_dev_link(dev, upper_dev, true); +} +EXPORT_SYMBOL(netdev_master_upper_dev_link); + +/** + * netdev_upper_dev_unlink - Removes a link to upper device + * @dev: device + * @upper_dev: new upper device + * + * Removes a link to device which is upper to this one. The caller must hold + * the RTNL lock. + */ +void netdev_upper_dev_unlink(struct net_device *dev, + struct net_device *upper_dev) +{ + struct netdev_upper *upper; + + ASSERT_RTNL(); + + upper = __netdev_find_upper(dev, upper_dev); + if (!upper) + return; + list_del_rcu(&upper->list); + dev_put(upper_dev); + kfree_rcu(upper, rcu); +} +EXPORT_SYMBOL(netdev_upper_dev_unlink); + /** * netdev_set_master - set up master pointer * @slave: slave device @@ -4613,19 +4839,23 @@ static int __init dev_proc_init(void) int netdev_set_master(struct net_device *slave, struct net_device *master) { struct net_device *old = slave->master; + int err; ASSERT_RTNL(); if (master) { if (old) return -EBUSY; - dev_hold(master); + err = netdev_master_upper_dev_link(slave, master); + if (err) + return err; } slave->master = master; if (old) - dev_put(old); + netdev_upper_dev_unlink(slave, master); + return 0; } EXPORT_SYMBOL(netdev_set_master); @@ -5503,8 +5733,8 @@ static void rollback_registered_many(struct list_head *head) if (dev->netdev_ops->ndo_uninit) dev->netdev_ops->ndo_uninit(dev); - /* Notifier chain MUST detach us from master device. */ - WARN_ON(dev->master); + /* Notifier chain MUST detach us all upper devices. */ + WARN_ON(netdev_has_any_upper_dev(dev)); /* Remove entries from kobject tree */ netdev_unregister_kobject(dev); @@ -6212,6 +6442,7 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name, INIT_LIST_HEAD(&dev->napi_list); INIT_LIST_HEAD(&dev->unreg_list); INIT_LIST_HEAD(&dev->link_watch_list); + INIT_LIST_HEAD(&dev->upper_dev_list); dev->priv_flags = IFF_XMIT_DST_RELEASE; setup(dev); -- cgit v0.10.2 From 7cd43db77eed83ce9c2086edb402748256e05f14 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:50 +0000 Subject: macvlan: add link to upper device Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 80c6f92..0ae4518 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -764,16 +764,22 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, memcpy(dev->dev_addr, lowerdev->dev_addr, ETH_ALEN); } + err = netdev_upper_dev_link(lowerdev, dev); + if (err) + goto destroy_port; + port->count += 1; err = register_netdevice(dev); if (err < 0) - goto destroy_port; + goto upper_dev_unlink; list_add_tail(&vlan->list, &port->vlans); netif_stacked_transfer_operstate(lowerdev, dev); return 0; +upper_dev_unlink: + netdev_upper_dev_unlink(lowerdev, dev); destroy_port: port->count -= 1; if (!port->count) @@ -797,6 +803,7 @@ void macvlan_dellink(struct net_device *dev, struct list_head *head) list_del(&vlan->list); unregister_netdevice_queue(dev, head); + netdev_upper_dev_unlink(vlan->lowerdev, dev); } EXPORT_SYMBOL_GPL(macvlan_dellink); -- cgit v0.10.2 From 126d6c236bb817c8752be41884e4c72a52a50f92 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:51 +0000 Subject: vlan: add link to upper device Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index a292e80..babfde9 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -105,6 +105,8 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head) */ unregister_netdevice_queue(dev, head); + netdev_upper_dev_unlink(real_dev, dev); + if (grp->nr_vlan_devs == 0) vlan_gvrp_uninit_applicant(real_dev); @@ -162,9 +164,13 @@ int register_vlan_dev(struct net_device *dev) if (err < 0) goto out_uninit_applicant; + err = netdev_upper_dev_link(real_dev, dev); + if (err) + goto out_uninit_applicant; + err = register_netdevice(dev); if (err < 0) - goto out_uninit_applicant; + goto out_upper_dev_unlink; /* Account for reference in struct vlan_dev_priv */ dev_hold(real_dev); @@ -180,6 +186,8 @@ int register_vlan_dev(struct net_device *dev) return 0; +out_upper_dev_unlink: + netdev_upper_dev_unlink(real_dev, dev); out_uninit_applicant: if (grp->nr_vlan_devs == 0) vlan_gvrp_uninit_applicant(real_dev); -- cgit v0.10.2 From 898e506171b2c6132cdebd450ab4db81ae9a59bc Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:52 +0000 Subject: rtnetlink: remove usage of dev->master Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 78d05a9..d26becb 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -880,6 +880,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, const struct rtnl_link_stats64 *stats; struct nlattr *attr, *af_spec; struct rtnl_af_ops *af_ops; + struct net_device *upper_dev = netdev_master_upper_dev_get(dev); ASSERT_RTNL(); nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ifm), flags); @@ -908,8 +909,8 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, #endif (dev->ifindex != dev->iflink && nla_put_u32(skb, IFLA_LINK, dev->iflink)) || - (dev->master && - nla_put_u32(skb, IFLA_MASTER, dev->master->ifindex)) || + (upper_dev && + nla_put_u32(skb, IFLA_MASTER, upper_dev->ifindex)) || nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) || (dev->qdisc && nla_put_string(skb, IFLA_QDISC, dev->qdisc->ops->id)) || @@ -1273,16 +1274,16 @@ static int do_setvfinfo(struct net_device *dev, struct nlattr *attr) static int do_set_master(struct net_device *dev, int ifindex) { - struct net_device *master_dev; + struct net_device *upper_dev = netdev_master_upper_dev_get(dev); const struct net_device_ops *ops; int err; - if (dev->master) { - if (dev->master->ifindex == ifindex) + if (upper_dev) { + if (upper_dev->ifindex == ifindex) return 0; - ops = dev->master->netdev_ops; + ops = upper_dev->netdev_ops; if (ops->ndo_del_slave) { - err = ops->ndo_del_slave(dev->master, dev); + err = ops->ndo_del_slave(upper_dev, dev); if (err) return err; } else { @@ -1291,12 +1292,12 @@ static int do_set_master(struct net_device *dev, int ifindex) } if (ifindex) { - master_dev = __dev_get_by_index(dev_net(dev), ifindex); - if (!master_dev) + upper_dev = __dev_get_by_index(dev_net(dev), ifindex); + if (!upper_dev) return -EINVAL; - ops = master_dev->netdev_ops; + ops = upper_dev->netdev_ops; if (ops->ndo_add_slave) { - err = ops->ndo_add_slave(master_dev, dev); + err = ops->ndo_add_slave(upper_dev, dev); if (err) return err; } else { @@ -2048,7 +2049,6 @@ errout: static int rtnl_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) { struct net *net = sock_net(skb->sk); - struct net_device *master = NULL; struct ndmsg *ndm; struct nlattr *tb[NDA_MAX+1]; struct net_device *dev; @@ -2090,10 +2090,10 @@ static int rtnl_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) /* Support fdb on master device the net/bridge default case */ if ((!ndm->ndm_flags || ndm->ndm_flags & NTF_MASTER) && (dev->priv_flags & IFF_BRIDGE_PORT)) { - master = dev->master; - err = master->netdev_ops->ndo_fdb_add(ndm, tb, - dev, addr, - nlh->nlmsg_flags); + struct net_device *br_dev = netdev_master_upper_dev_get(dev); + const struct net_device_ops *ops = br_dev->netdev_ops; + + err = ops->ndo_fdb_add(ndm, tb, dev, addr, nlh->nlmsg_flags); if (err) goto out; else @@ -2154,10 +2154,11 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) /* Support fdb on master device the net/bridge default case */ if ((!ndm->ndm_flags || ndm->ndm_flags & NTF_MASTER) && (dev->priv_flags & IFF_BRIDGE_PORT)) { - struct net_device *master = dev->master; + struct net_device *br_dev = netdev_master_upper_dev_get(dev); + const struct net_device_ops *ops = br_dev->netdev_ops; - if (master->netdev_ops->ndo_fdb_del) - err = master->netdev_ops->ndo_fdb_del(ndm, dev, addr); + if (ops->ndo_fdb_del) + err = ops->ndo_fdb_del(ndm, dev, addr); if (err) goto out; @@ -2241,9 +2242,11 @@ static int rtnl_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); for_each_netdev_rcu(net, dev) { if (dev->priv_flags & IFF_BRIDGE_PORT) { - struct net_device *master = dev->master; - const struct net_device_ops *ops = master->netdev_ops; + struct net_device *br_dev; + const struct net_device_ops *ops; + br_dev = netdev_master_upper_dev_get(dev); + ops = br_dev->netdev_ops; if (ops->ndo_fdb_dump) idx = ops->ndo_fdb_dump(skb, cb, dev, idx); } @@ -2264,6 +2267,7 @@ int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct ifinfomsg *ifm; struct nlattr *br_afspec; u8 operstate = netif_running(dev) ? dev->operstate : IF_OPER_DOWN; + struct net_device *br_dev = netdev_master_upper_dev_get(dev); nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*ifm), NLM_F_MULTI); if (nlh == NULL) @@ -2281,8 +2285,8 @@ int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, if (nla_put_string(skb, IFLA_IFNAME, dev->name) || nla_put_u32(skb, IFLA_MTU, dev->mtu) || nla_put_u8(skb, IFLA_OPERSTATE, operstate) || - (dev->master && - nla_put_u32(skb, IFLA_MASTER, dev->master->ifindex)) || + (br_dev && + nla_put_u32(skb, IFLA_MASTER, br_dev->ifindex)) || (dev->addr_len && nla_put(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr)) || (dev->ifindex != dev->iflink && @@ -2318,11 +2322,11 @@ static int rtnl_bridge_getlink(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); for_each_netdev_rcu(net, dev) { const struct net_device_ops *ops = dev->netdev_ops; - struct net_device *master = dev->master; + struct net_device *br_dev = netdev_master_upper_dev_get(dev); - if (master && master->netdev_ops->ndo_bridge_getlink) { + if (br_dev && br_dev->netdev_ops->ndo_bridge_getlink) { if (idx >= cb->args[0] && - master->netdev_ops->ndo_bridge_getlink( + br_dev->netdev_ops->ndo_bridge_getlink( skb, portid, seq, dev) < 0) break; idx++; @@ -2359,7 +2363,7 @@ static inline size_t bridge_nlmsg_size(void) static int rtnl_bridge_notify(struct net_device *dev, u16 flags) { struct net *net = dev_net(dev); - struct net_device *master = dev->master; + struct net_device *br_dev = netdev_master_upper_dev_get(dev); struct sk_buff *skb; int err = -EOPNOTSUPP; @@ -2370,8 +2374,8 @@ static int rtnl_bridge_notify(struct net_device *dev, u16 flags) } if ((!flags || (flags & BRIDGE_FLAGS_MASTER)) && - master && master->netdev_ops->ndo_bridge_getlink) { - err = master->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev); + br_dev && br_dev->netdev_ops->ndo_bridge_getlink) { + err = br_dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev); if (err < 0) goto errout; } @@ -2430,13 +2434,14 @@ static int rtnl_bridge_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, oflags = flags; if (!flags || (flags & BRIDGE_FLAGS_MASTER)) { - if (!dev->master || - !dev->master->netdev_ops->ndo_bridge_setlink) { + struct net_device *br_dev = netdev_master_upper_dev_get(dev); + + if (!br_dev || !br_dev->netdev_ops->ndo_bridge_setlink) { err = -EOPNOTSUPP; goto out; } - err = dev->master->netdev_ops->ndo_bridge_setlink(dev, nlh); + err = br_dev->netdev_ops->ndo_bridge_setlink(dev, nlh); if (err) goto out; -- cgit v0.10.2 From b1cc9850cd92856196a45e75e97e9d6c2c0b6dc3 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:53 +0000 Subject: team: remove usage of netdev_set_master() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 2ea4f0e..250f8c1 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1055,10 +1055,11 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } } - err = netdev_set_master(port_dev, dev); + err = netdev_master_upper_dev_link(port_dev, dev); if (err) { - netdev_err(dev, "Device %s failed to set master\n", portname); - goto err_set_master; + netdev_err(dev, "Device %s failed to set upper link\n", + portname); + goto err_set_upper_link; } err = netdev_rx_handler_register(port_dev, team_handle_frame, @@ -1091,9 +1092,9 @@ err_option_port_add: netdev_rx_handler_unregister(port_dev); err_handler_register: - netdev_set_master(port_dev, NULL); + netdev_upper_dev_unlink(port_dev, dev); -err_set_master: +err_set_upper_link: team_port_disable_netpoll(port); err_enable_netpoll: @@ -1137,7 +1138,7 @@ static int team_port_del(struct team *team, struct net_device *port_dev) team_port_disable(team, port); list_del_rcu(&port->list); netdev_rx_handler_unregister(port_dev); - netdev_set_master(port_dev, NULL); + netdev_upper_dev_unlink(port_dev, dev); team_port_disable_netpoll(port); vlan_vids_del_by_dev(port_dev, dev); dev_close(port_dev); -- cgit v0.10.2 From 74fdd93fbcc16522406f65c564ea104490ad4908 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:54 +0000 Subject: bridge: remove usage of netdev_set_master() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 1edd71d..2148d47 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -148,7 +148,7 @@ static void del_nbp(struct net_bridge_port *p) netdev_rx_handler_unregister(dev); synchronize_net(); - netdev_set_master(dev, NULL); + netdev_upper_dev_unlink(dev, br->dev); br_multicast_del_port(p); @@ -364,7 +364,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) if (br_netpoll_info(br) && ((err = br_netpoll_enable(p, GFP_KERNEL)))) goto err3; - err = netdev_set_master(dev, br->dev); + err = netdev_master_upper_dev_link(dev, br->dev); if (err) goto err4; @@ -403,7 +403,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) return 0; err5: - netdev_set_master(dev, NULL); + netdev_upper_dev_unlink(dev, br->dev); err4: br_netpoll_disable(p); err3: -- cgit v0.10.2 From 49bd8fb0b18944fc0b6b11d999619d3687c3914a Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:55 +0000 Subject: netpoll: remove usage of dev->master Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 3151acf..d2bda8e 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -210,9 +210,12 @@ static void netpoll_poll_dev(struct net_device *dev) if (dev->flags & IFF_SLAVE) { if (ni) { - struct net_device *bond_dev = dev->master; + struct net_device *bond_dev; struct sk_buff *skb; - struct netpoll_info *bond_ni = rcu_dereference_bh(bond_dev->npinfo); + struct netpoll_info *bond_ni; + + bond_dev = netdev_master_upper_dev_get_rcu(dev); + bond_ni = rcu_dereference_bh(bond_dev->npinfo); while ((skb = skb_dequeue(&ni->arp_tx))) { skb->dev = bond_dev; skb_queue_tail(&bond_ni->arp_tx, skb); @@ -815,7 +818,7 @@ int netpoll_setup(struct netpoll *np) return -ENODEV; } - if (ndev->master) { + if (netdev_master_upper_dev_get(ndev)) { np_err(np, "%s is a slave device, aborting\n", np->dev_name); err = -EBUSY; goto put; -- cgit v0.10.2 From 2eea05b0de6bb83dc07ddd5154b1baccba773e6a Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:56 +0000 Subject: cxgb3: remove usage of dev->master Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c index 942dace..3f1f501 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c @@ -182,14 +182,17 @@ static struct net_device *get_iff_from_mac(struct adapter *adapter, struct net_device *dev = adapter->port[i]; if (!memcmp(dev->dev_addr, mac, ETH_ALEN)) { + rcu_read_lock(); if (vlan && vlan != VLAN_VID_MASK) { - rcu_read_lock(); dev = __vlan_find_dev_deep(dev, vlan); - rcu_read_unlock(); } else if (netif_is_bond_slave(dev)) { - while (dev->master) - dev = dev->master; + struct net_device *upper_dev; + + while ((upper_dev = + netdev_master_upper_dev_get_rcu(dev))) + dev = upper_dev; } + rcu_read_unlock(); return dev; } } -- cgit v0.10.2 From 43c00a75d205ffee165c40f37edb1d2173dea7ea Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:57 +0000 Subject: qlcnic: guard __vlan_find_dev_deep() by rcu_read_lock rcu_read_lock was missing here Signed-off-by: Jiri Pirko Acked-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 137ca13..3655ca2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3186,12 +3186,14 @@ void qlcnic_restore_indev_addr(struct net_device *netdev, unsigned long event) qlcnic_config_indev_addr(adapter, netdev, event); + rcu_read_lock(); for_each_set_bit(vid, adapter->vlans, VLAN_N_VID) { dev = __vlan_find_dev_deep(netdev, vid); if (!dev) continue; qlcnic_config_indev_addr(adapter, dev, event); } + rcu_read_unlock(); } static int qlcnic_netdev_event(struct notifier_block *this, -- cgit v0.10.2 From 0347af510cb8d9bf3014042bf1d2f23d9065f5d2 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:58 +0000 Subject: qeth: ensure that __vlan_find_dev_deep() is called with rcu_read_lock Also benefit from rcu_read_lock held and use __in_dev_get_rcu() in ipv4 case. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 6e5eef0..0749efe 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1640,6 +1640,7 @@ static void qeth_l3_add_mc(struct qeth_card *card, struct in_device *in4_dev) } } +/* called with rcu_read_lock */ static void qeth_l3_add_vlan_mc(struct qeth_card *card) { struct in_device *in_dev; @@ -1652,19 +1653,14 @@ static void qeth_l3_add_vlan_mc(struct qeth_card *card) for_each_set_bit(vid, card->active_vlans, VLAN_N_VID) { struct net_device *netdev; - rcu_read_lock(); netdev = __vlan_find_dev_deep(card->dev, vid); - rcu_read_unlock(); if (netdev == NULL || !(netdev->flags & IFF_UP)) continue; - in_dev = in_dev_get(netdev); + in_dev = __in_dev_get_rcu(netdev); if (!in_dev) continue; - rcu_read_lock(); qeth_l3_add_mc(card, in_dev); - rcu_read_unlock(); - in_dev_put(in_dev); } } @@ -1673,14 +1669,14 @@ static void qeth_l3_add_multicast_ipv4(struct qeth_card *card) struct in_device *in4_dev; QETH_CARD_TEXT(card, 4, "chkmcv4"); - in4_dev = in_dev_get(card->dev); - if (in4_dev == NULL) - return; rcu_read_lock(); + in4_dev = __in_dev_get_rcu(card->dev); + if (in4_dev == NULL) + goto unlock; qeth_l3_add_mc(card, in4_dev); qeth_l3_add_vlan_mc(card); +unlock: rcu_read_unlock(); - in_dev_put(in4_dev); } #ifdef CONFIG_QETH_IPV6 @@ -1705,6 +1701,7 @@ static void qeth_l3_add_mc6(struct qeth_card *card, struct inet6_dev *in6_dev) } } +/* called with rcu_read_lock */ static void qeth_l3_add_vlan_mc6(struct qeth_card *card) { struct inet6_dev *in_dev; @@ -1741,10 +1738,12 @@ static void qeth_l3_add_multicast_ipv6(struct qeth_card *card) in6_dev = in6_dev_get(card->dev); if (in6_dev == NULL) return; + rcu_read_lock(); read_lock_bh(&in6_dev->lock); qeth_l3_add_mc6(card, in6_dev); qeth_l3_add_vlan_mc6(card); read_unlock_bh(&in6_dev->lock); + rcu_read_unlock(); in6_dev_put(in6_dev); } #endif /* CONFIG_QETH_IPV6 */ @@ -1813,8 +1812,10 @@ static void qeth_l3_free_vlan_addresses6(struct qeth_card *card, static void qeth_l3_free_vlan_addresses(struct qeth_card *card, unsigned short vid) { + rcu_read_lock(); qeth_l3_free_vlan_addresses4(card, vid); qeth_l3_free_vlan_addresses6(card, vid); + rcu_read_unlock(); } static int qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) -- cgit v0.10.2 From 1cdfd72f791918ab4690570d7d93a1f86e171cb8 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:48:59 +0000 Subject: vlan: remove usage of dev->master in __vlan_find_dev_deep() Also, since all users call __vlan_find_dev_deep() with rcu_read_lock, make no possibility to call this with rtnl mutex held only. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 65e06ab..380440b 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -60,21 +60,25 @@ bool vlan_do_receive(struct sk_buff **skbp) return true; } -/* Must be invoked with rcu_read_lock or with RTNL. */ -struct net_device *__vlan_find_dev_deep(struct net_device *real_dev, +/* Must be invoked with rcu_read_lock. */ +struct net_device *__vlan_find_dev_deep(struct net_device *dev, u16 vlan_id) { - struct vlan_info *vlan_info = rcu_dereference_rtnl(real_dev->vlan_info); + struct vlan_info *vlan_info = rcu_dereference(dev->vlan_info); if (vlan_info) { return vlan_group_get_device(&vlan_info->grp, vlan_id); } else { /* - * Bonding slaves do not have grp assigned to themselves. - * Grp is assigned to bonding master instead. + * Lower devices of master uppers (bonding, team) do not have + * grp assigned to themselves. Grp is assigned to upper device + * instead. */ - if (netif_is_bond_slave(real_dev)) - return __vlan_find_dev_deep(real_dev->master, vlan_id); + struct net_device *upper_dev; + + upper_dev = netdev_master_upper_dev_get_rcu(dev); + if (upper_dev) + return __vlan_find_dev_deep(upper_dev, vlan_id); } return NULL; -- cgit v0.10.2 From 7f6e7101dfcc228151779354f6cdc5e1d62f576b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:49:00 +0000 Subject: nes: remove usage of dev->master Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 748db2d..d129c36 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -135,6 +135,7 @@ static int nes_inetaddr_event(struct notifier_block *notifier, struct net_device *event_netdev = ifa->ifa_dev->dev; struct nes_device *nesdev; struct net_device *netdev; + struct net_device *upper_dev; struct nes_vnic *nesvnic; unsigned int is_bonded; @@ -145,8 +146,9 @@ static int nes_inetaddr_event(struct notifier_block *notifier, nesdev, nesdev->netdev[0]->name); netdev = nesdev->netdev[0]; nesvnic = netdev_priv(netdev); + upper_dev = netdev_master_upper_dev_get(netdev); is_bonded = netif_is_bond_slave(netdev) && - (netdev->master == event_netdev); + (upper_dev == event_netdev); if ((netdev == event_netdev) || is_bonded) { if (nesvnic->rdma_enabled == 0) { nes_debug(NES_DBG_NETDEV, "Returning without processing event for %s since" @@ -179,9 +181,9 @@ static int nes_inetaddr_event(struct notifier_block *notifier, /* fall through */ case NETDEV_CHANGEADDR: /* Add the address to the IP table */ - if (netdev->master) + if (upper_dev) nesvnic->local_ipaddr = - ((struct in_device *)netdev->master->ip_ptr)->ifa_list->ifa_address; + ((struct in_device *)upper_dev->ip_ptr)->ifa_list->ifa_address; else nesvnic->local_ipaddr = ifa->ifa_address; diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 22ea67e..24b9f1a 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1340,7 +1340,7 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi } if (netif_is_bond_slave(nesvnic->netdev)) - netdev = nesvnic->netdev->master; + netdev = netdev_master_upper_dev_get(nesvnic->netdev); else netdev = nesvnic->netdev; -- cgit v0.10.2 From 471cb5a33dcbd7c529684a2ac7ba4451414ee4a7 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:49:01 +0000 Subject: bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index a030e63..84fabd6 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1127,7 +1127,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) // INFO_RECEIVED_LOOPBACK_FRAMES pr_err("%s: An illegal loopback occurred on adapter (%s).\n" "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n", - port->slave->dev->master->name, port->slave->dev->name); + port->slave->bond->dev->name, port->slave->dev->name); return; } __update_selected(lacpdu, port); @@ -1306,7 +1306,7 @@ static void ad_port_selection_logic(struct port *port) } if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list pr_warning("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n", - port->slave->dev->master->name, + port->slave->bond->dev->name, port->actor_port_number, port->slave->dev->name, port->aggregator->aggregator_identifier); @@ -1386,7 +1386,7 @@ static void ad_port_selection_logic(struct port *port) port->aggregator->aggregator_identifier); } else { pr_err("%s: Port %d (on %s) did not find a suitable aggregator\n", - port->slave->dev->master->name, + port->slave->bond->dev->name, port->actor_port_number, port->slave->dev->name); } } @@ -1463,7 +1463,7 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, default: pr_warning("%s: Impossible agg select mode %d\n", - curr->slave->dev->master->name, + curr->slave->bond->dev->name, __get_agg_selection_mode(curr->lag_ports)); break; } @@ -1571,7 +1571,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) // check if any partner replys if (best->is_individual) { pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n", - best->slave ? best->slave->dev->master->name : "NULL"); + best->slave ? best->slave->bond->dev->name : "NULL"); } best->is_active = 1; @@ -1898,7 +1898,7 @@ int bond_3ad_bind_slave(struct slave *slave) if (bond == NULL) { pr_err("%s: The slave %s is not attached to its bond\n", - slave->dev->master->name, slave->dev->name); + slave->bond->dev->name, slave->dev->name); return -1; } @@ -1973,7 +1973,7 @@ void bond_3ad_unbind_slave(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { pr_warning("Warning: %s: Trying to unbind an uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + slave->bond->dev->name, slave->dev->name); return; } @@ -2009,7 +2009,7 @@ void bond_3ad_unbind_slave(struct slave *slave) if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { pr_info("%s: Removing an active aggregator\n", - aggregator->slave->dev->master->name); + aggregator->slave->bond->dev->name); // select new active aggregator select_new_active_agg = 1; } @@ -2040,7 +2040,7 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_agg_selection_logic(__get_first_agg(port)); } else { pr_warning("%s: Warning: unbinding aggregator, and could not find a new aggregator for its ports\n", - slave->dev->master->name); + slave->bond->dev->name); } } else { // in case that the only port related to this aggregator is the one we want to remove select_new_active_agg = aggregator->is_active; @@ -2048,7 +2048,7 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_clear_agg(aggregator); if (select_new_active_agg) { pr_info("%s: Removing an active aggregator\n", - slave->dev->master->name); + slave->bond->dev->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2076,7 +2076,7 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_clear_agg(temp_aggregator); if (select_new_active_agg) { pr_info("%s: Removing an active aggregator\n", - slave->dev->master->name); + slave->bond->dev->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2184,7 +2184,7 @@ static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u1 if (!port->slave) { pr_warning("%s: Warning: port of slave %s is uninitialized\n", - slave->dev->name, slave->dev->master->name); + slave->dev->name, slave->bond->dev->name); return ret; } @@ -2240,7 +2240,7 @@ void bond_3ad_adapter_speed_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { pr_warning("Warning: %s: speed changed for uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + slave->bond->dev->name, slave->dev->name); return; } @@ -2268,7 +2268,7 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { pr_warning("%s: Warning: duplex changed for uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + slave->bond->dev->name, slave->dev->name); return; } @@ -2297,7 +2297,7 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) // if slave is null, the whole port is not initialized if (!port->slave) { pr_warning("Warning: %s: link status changed for uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + slave->bond->dev->name, slave->dev->name); return; } diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 7c9d136..f5e0527 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -507,7 +507,7 @@ static void rlb_update_client(struct rlb_client_info *client_info) client_info->mac_dst); if (!skb) { pr_err("%s: Error: failed to create an ARP packet\n", - client_info->slave->dev->master->name); + client_info->slave->bond->dev->name); continue; } @@ -517,7 +517,7 @@ static void rlb_update_client(struct rlb_client_info *client_info) skb = vlan_put_tag(skb, client_info->vlan_id); if (!skb) { pr_err("%s: Error: failed to insert VLAN tag\n", - client_info->slave->dev->master->name); + client_info->slave->bond->dev->name); continue; } } @@ -1043,7 +1043,7 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[]) if (dev_set_mac_address(dev, &s_addr)) { pr_err("%s: Error: dev_set_mac_address of dev %s failed!\n" "ALB mode requires that the base driver support setting the hw address also when the network device's interface is open\n", - dev->master->name, dev->name); + slave->bond->dev->name, dev->name); return -EOPNOTSUPP; } return 0; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b7d45f3..c495298 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -746,11 +746,9 @@ static void __bond_resend_igmp_join_requests(struct net_device *dev) { struct in_device *in_dev; - rcu_read_lock(); in_dev = __in_dev_get_rcu(dev); if (in_dev) ip_mc_rejoin_groups(in_dev); - rcu_read_unlock(); } /* @@ -760,9 +758,10 @@ static void __bond_resend_igmp_join_requests(struct net_device *dev) */ static void bond_resend_igmp_join_requests(struct bonding *bond) { - struct net_device *bond_dev, *vlan_dev, *master_dev; + struct net_device *bond_dev, *vlan_dev, *upper_dev; struct vlan_entry *vlan; + rcu_read_lock(); read_lock(&bond->lock); bond_dev = bond->dev; @@ -774,18 +773,14 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) * if bond is enslaved to a bridge, * then rejoin all groups on its master */ - master_dev = bond_dev->master; - if (master_dev) - if ((master_dev->priv_flags & IFF_EBRIDGE) - && (bond_dev->priv_flags & IFF_BRIDGE_PORT)) - __bond_resend_igmp_join_requests(master_dev); + upper_dev = netdev_master_upper_dev_get_rcu(bond_dev); + if (upper_dev && upper_dev->priv_flags & IFF_EBRIDGE) + __bond_resend_igmp_join_requests(upper_dev); /* rejoin all groups on vlan devices */ list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { - rcu_read_lock(); vlan_dev = __vlan_find_dev_deep(bond_dev, vlan->vlan_id); - rcu_read_unlock(); if (vlan_dev) __bond_resend_igmp_join_requests(vlan_dev); } @@ -794,13 +789,16 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); read_unlock(&bond->lock); + rcu_read_unlock(); } static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) { struct bonding *bond = container_of(work, struct bonding, mcast_work.work); + rcu_read_lock(); bond_resend_igmp_join_requests(bond); + rcu_read_unlock(); } /* @@ -1493,6 +1491,27 @@ static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb) return ret; } +static int bond_master_upper_dev_link(struct net_device *bond_dev, + struct net_device *slave_dev) +{ + int err; + + err = netdev_master_upper_dev_link(slave_dev, bond_dev); + if (err) + return err; + slave_dev->flags |= IFF_SLAVE; + rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE); + return 0; +} + +static void bond_upper_dev_unlink(struct net_device *bond_dev, + struct net_device *slave_dev) +{ + netdev_upper_dev_unlink(slave_dev, bond_dev); + slave_dev->flags &= ~IFF_SLAVE; + rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE); +} + /* enslave device to bond device */ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) { @@ -1655,9 +1674,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) } } - res = netdev_set_bond_master(slave_dev, bond_dev); + res = bond_master_upper_dev_link(bond_dev, slave_dev); if (res) { - pr_debug("Error %d calling netdev_set_bond_master\n", res); + pr_debug("Error %d calling bond_master_upper_dev_link\n", res); goto err_restore_mac; } @@ -1891,7 +1910,7 @@ err_close: dev_close(slave_dev); err_unset_master: - netdev_set_bond_master(slave_dev, NULL); + bond_upper_dev_unlink(bond_dev, slave_dev); err_restore_mac: if (!bond->params.fail_over_mac) { @@ -1936,7 +1955,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) /* slave is not a slave or master is not master of this slave */ if (!(slave_dev->flags & IFF_SLAVE) || - (slave_dev->master != bond_dev)) { + !netdev_has_upper_dev(slave_dev, bond_dev)) { pr_err("%s: Error: cannot release %s.\n", bond_dev->name, slave_dev->name); return -EINVAL; @@ -2080,7 +2099,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) netif_addr_unlock_bh(bond_dev); } - netdev_set_bond_master(slave_dev, NULL); + bond_upper_dev_unlink(bond_dev, slave_dev); slave_disable_netpoll(slave); @@ -2195,7 +2214,7 @@ static int bond_release_all(struct net_device *bond_dev) netif_addr_unlock_bh(bond_dev); } - netdev_set_bond_master(slave_dev, NULL); + bond_upper_dev_unlink(bond_dev, slave_dev); slave_disable_netpoll(slave); @@ -2259,8 +2278,9 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi if (!USES_PRIMARY(bond->params.mode)) return -EINVAL; - /* Verify that master_dev is indeed the master of slave_dev */ - if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev)) + /* Verify that bond_dev is indeed the master of slave_dev */ + if (!(slave_dev->flags & IFF_SLAVE) || + !netdev_has_upper_dev(slave_dev, bond_dev)) return -EINVAL; read_lock(&bond->lock); @@ -3258,36 +3278,32 @@ static int bond_master_netdev_event(unsigned long event, static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev) { - struct net_device *bond_dev = slave_dev->master; - struct bonding *bond = netdev_priv(bond_dev); - struct slave *slave = NULL; + struct slave *slave = bond_slave_get_rtnl(slave_dev); + struct bonding *bond = slave->bond; + struct net_device *bond_dev = slave->bond->dev; + u32 old_speed; + u8 old_duplex; switch (event) { case NETDEV_UNREGISTER: - if (bond_dev) { - if (bond->setup_by_slave) - bond_release_and_destroy(bond_dev, slave_dev); - else - bond_release(bond_dev, slave_dev); - } + if (bond->setup_by_slave) + bond_release_and_destroy(bond_dev, slave_dev); + else + bond_release(bond_dev, slave_dev); break; case NETDEV_UP: case NETDEV_CHANGE: - slave = bond_get_slave_by_dev(bond, slave_dev); - if (slave) { - u32 old_speed = slave->speed; - u8 old_duplex = slave->duplex; + old_speed = slave->speed; + old_duplex = slave->duplex; - bond_update_speed_duplex(slave); + bond_update_speed_duplex(slave); - if (bond->params.mode == BOND_MODE_8023AD) { - if (old_speed != slave->speed) - bond_3ad_adapter_speed_changed(slave); - if (old_duplex != slave->duplex) - bond_3ad_adapter_duplex_changed(slave); - } + if (bond->params.mode == BOND_MODE_8023AD) { + if (old_speed != slave->speed) + bond_3ad_adapter_speed_changed(slave); + if (old_duplex != slave->duplex) + bond_3ad_adapter_duplex_changed(slave); } - break; case NETDEV_DOWN: /* diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 21b68e5..0d282d2 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -258,6 +258,9 @@ static inline bool bond_vlan_used(struct bonding *bond) #define bond_slave_get_rcu(dev) \ ((struct slave *) rcu_dereference(dev->rx_handler_data)) +#define bond_slave_get_rtnl(dev) \ + ((struct slave *) rtnl_dereference(dev->rx_handler_data)) + /** * Returns NULL if the net_device does not belong to any of the bond's slaves * @@ -280,11 +283,9 @@ static inline struct slave *bond_get_slave_by_dev(struct bonding *bond, static inline struct bonding *bond_get_bond_by_slave(struct slave *slave) { - if (!slave || !slave->dev->master) { + if (!slave || !slave->bond) return NULL; - } - - return netdev_priv(slave->dev->master); + return slave->bond; } static inline bool bond_is_lb(const struct bonding *bond) @@ -360,10 +361,9 @@ static inline void bond_netpoll_send_skb(const struct slave *slave, static inline void bond_set_slave_inactive_flags(struct slave *slave) { - struct bonding *bond = netdev_priv(slave->dev->master); - if (!bond_is_lb(bond)) + if (!bond_is_lb(slave->bond)) bond_set_backup_slave(slave); - if (!bond->params.all_slaves_active) + if (!slave->bond->params.all_slaves_active) slave->inactive = 1; } diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index d26becb..9969afb 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1987,6 +1987,7 @@ errout: if (err < 0) rtnl_set_sk_err(net, RTNLGRP_LINK, err); } +EXPORT_SYMBOL(rtmsg_ifinfo); static int nlmsg_populate_fdb_fill(struct sk_buff *skb, struct net_device *dev, -- cgit v0.10.2 From 8b98a70c28a607a02b3c3d41bc9a4c141f421052 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:49:02 +0000 Subject: net: remove no longer used netdev_set_bond_master() and netdev_set_master() Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index e324601..3cad8ea 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -858,8 +858,7 @@ struct netdev_fcoe_hbainfo { * flow_id is a flow ID to be passed to rps_may_expire_flow() later. * Return the filter ID on success, or a negative error code. * - * Slave management functions (for bridge, bonding, etc). User should - * call netdev_set_master() to set dev->master properly. + * Slave management functions (for bridge, bonding, etc). * int (*ndo_add_slave)(struct net_device *dev, struct net_device *slave_dev); * Called to make another netdev an underling. * @@ -2650,9 +2649,6 @@ extern int netdev_master_upper_dev_link(struct net_device *dev, struct net_device *upper_dev); extern void netdev_upper_dev_unlink(struct net_device *dev, struct net_device *upper_dev); -extern int netdev_set_master(struct net_device *dev, struct net_device *master); -extern int netdev_set_bond_master(struct net_device *dev, - struct net_device *master); extern int skb_checksum_help(struct sk_buff *skb); extern struct sk_buff *skb_gso_segment(struct sk_buff *skb, netdev_features_t features); diff --git a/net/core/dev.c b/net/core/dev.c index 53a9fef..a51ccf4 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4826,69 +4826,6 @@ void netdev_upper_dev_unlink(struct net_device *dev, } EXPORT_SYMBOL(netdev_upper_dev_unlink); -/** - * netdev_set_master - set up master pointer - * @slave: slave device - * @master: new master device - * - * Changes the master device of the slave. Pass %NULL to break the - * bonding. The caller must hold the RTNL semaphore. On a failure - * a negative errno code is returned. On success the reference counts - * are adjusted and the function returns zero. - */ -int netdev_set_master(struct net_device *slave, struct net_device *master) -{ - struct net_device *old = slave->master; - int err; - - ASSERT_RTNL(); - - if (master) { - if (old) - return -EBUSY; - err = netdev_master_upper_dev_link(slave, master); - if (err) - return err; - } - - slave->master = master; - - if (old) - netdev_upper_dev_unlink(slave, master); - - return 0; -} -EXPORT_SYMBOL(netdev_set_master); - -/** - * netdev_set_bond_master - set up bonding master/slave pair - * @slave: slave device - * @master: new master device - * - * Changes the master device of the slave. Pass %NULL to break the - * bonding. The caller must hold the RTNL semaphore. On a failure - * a negative errno code is returned. On success %RTM_NEWLINK is sent - * to the routing socket and the function returns zero. - */ -int netdev_set_bond_master(struct net_device *slave, struct net_device *master) -{ - int err; - - ASSERT_RTNL(); - - err = netdev_set_master(slave, master); - if (err) - return err; - if (master) - slave->flags |= IFF_SLAVE; - else - slave->flags &= ~IFF_SLAVE; - - rtmsg_ifinfo(RTM_NEWLINK, slave, IFF_SLAVE); - return 0; -} -EXPORT_SYMBOL(netdev_set_bond_master); - static void dev_change_rx_flags(struct net_device *dev, int flags) { const struct net_device_ops *ops = dev->netdev_ops; -- cgit v0.10.2 From 85464ef271a0f5496f404c6a2f2dfbf1d76e1a49 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 3 Jan 2013 22:49:03 +0000 Subject: net: kill dev->master Nobody uses this now. Remove it. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3cad8ea..0209ac3 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1169,10 +1169,6 @@ struct net_device { * avoid dirtying this cache line. */ - struct net_device *master; /* Pointer to master device of a group, - * which this device is member of. - */ - struct list_head upper_dev_list; /* List of upper devices */ /* Interface address info used in eth_type_trans() */ -- cgit v0.10.2 From e360a8b4eddc8bc6d25f98628fffc803b6ea7f28 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 3 Jan 2013 03:00:15 +0000 Subject: smsc95xx: eliminate duplicate warnings on io failure The register read/write functions already log a warning if an access fails, so this patch removes the additional warnings logged by callers that don't add any more information. This patch makes the resulting driver smaller by not containing as many warning strings. Signed-off-by: Joe Perches Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 9b73670..124e67f 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -513,10 +513,8 @@ static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex, u32 flow, afc_cfg = 0; int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg); - if (ret < 0) { - netdev_warn(dev->net, "Error reading AFC_CFG\n"); + if (ret < 0) return ret; - } if (duplex == DUPLEX_FULL) { u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); @@ -541,16 +539,10 @@ static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex, } ret = smsc95xx_write_reg(dev, FLOW, flow); - if (ret < 0) { - netdev_warn(dev->net, "Error writing FLOW\n"); - return ret; - } - - ret = smsc95xx_write_reg(dev, AFC_CFG, afc_cfg); if (ret < 0) - netdev_warn(dev->net, "Error writing AFC_CFG\n"); + return ret; - return ret; + return smsc95xx_write_reg(dev, AFC_CFG, afc_cfg); } static int smsc95xx_link_reset(struct usbnet *dev) @@ -564,16 +556,12 @@ static int smsc95xx_link_reset(struct usbnet *dev) /* clear interrupt status */ ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PHY_INT_SRC\n"); + if (ret < 0) return ret; - } ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_); - if (ret < 0) { - netdev_warn(dev->net, "Error writing INT_STS\n"); + if (ret < 0) return ret; - } mii_check_media(mii, 1, 1); mii_ethtool_gset(&dev->mii, &ecmd); @@ -595,10 +583,8 @@ static int smsc95xx_link_reset(struct usbnet *dev) spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr); - if (ret < 0) { - netdev_warn(dev->net, "Error writing MAC_CR\n"); + if (ret < 0) return ret; - } ret = smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv); if (ret < 0) @@ -638,10 +624,8 @@ static int smsc95xx_set_features(struct net_device *netdev, int ret; ret = smsc95xx_read_reg(dev, COE_CR, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read COE_CR: %d\n", ret); + if (ret < 0) return ret; - } if (features & NETIF_F_HW_CSUM) read_buf |= Tx_COE_EN_; @@ -654,10 +638,8 @@ static int smsc95xx_set_features(struct net_device *netdev, read_buf &= ~Rx_COE_EN_; ret = smsc95xx_write_reg(dev, COE_CR, read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write COE_CR: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf); return 0; @@ -800,16 +782,10 @@ static int smsc95xx_set_mac_address(struct usbnet *dev) int ret; ret = smsc95xx_write_reg(dev, ADDRL, addr_lo); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write ADDRL: %d\n", ret); - return ret; - } - - ret = smsc95xx_write_reg(dev, ADDRH, addr_hi); if (ret < 0) - netdev_warn(dev->net, "Failed to write ADDRH: %d\n", ret); + return ret; - return ret; + return smsc95xx_write_reg(dev, ADDRH, addr_hi); } /* starts the TX path */ @@ -825,17 +801,11 @@ static int smsc95xx_start_tx_path(struct usbnet *dev) spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write MAC_CR: %d\n", ret); + if (ret < 0) return ret; - } /* Enable Tx at SCSRs */ - ret = smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_); - if (ret < 0) - netdev_warn(dev->net, "Failed to write TX_CFG: %d\n", ret); - - return ret; + return smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_); } /* Starts the Receive path */ @@ -843,17 +813,12 @@ static int smsc95xx_start_rx_path(struct usbnet *dev, int in_pm) { struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); unsigned long flags; - int ret; spin_lock_irqsave(&pdata->mac_cr_lock, flags); pdata->mac_cr |= MAC_CR_RXEN_; spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); - ret = __smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr, in_pm); - if (ret < 0) - netdev_warn(dev->net, "Failed to write MAC_CR: %d\n", ret); - - return ret; + return __smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr, in_pm); } static int smsc95xx_phy_initialize(struct usbnet *dev) @@ -910,19 +875,15 @@ static int smsc95xx_reset(struct usbnet *dev) netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n"); ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write HW_CFG_LRST_ bit in HW_CFG\n"); + if (ret < 0) return ret; - } timeout = 0; do { msleep(10); ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); + if (ret < 0) return ret; - } timeout++; } while ((read_buf & HW_CFG_LRST_) && (timeout < 100)); @@ -932,19 +893,15 @@ static int smsc95xx_reset(struct usbnet *dev) } ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write PM_CTRL: %d\n", ret); + if (ret < 0) return ret; - } timeout = 0; do { msleep(10); ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read PM_CTRL: %d\n", ret); + if (ret < 0) return ret; - } timeout++; } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100)); @@ -961,10 +918,8 @@ static int smsc95xx_reset(struct usbnet *dev) dev->net->dev_addr); ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n", read_buf); @@ -972,16 +927,12 @@ static int smsc95xx_reset(struct usbnet *dev) read_buf |= HW_CFG_BIR_; ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write HW_CFG_BIR_ bit in HW_CFG\n"); + if (ret < 0) return ret; - } ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n", @@ -1002,42 +953,32 @@ static int smsc95xx_reset(struct usbnet *dev) (ulong)dev->rx_urb_size); ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret); + if (ret < 0) return ret; - } ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "Read Value from BURST_CAP after writing: 0x%08x\n", read_buf); ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write BULK_IN_DLY: %d\n", ret); + if (ret < 0) return ret; - } ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "Read Value from BULK_IN_DLY after writing: 0x%08x\n", read_buf); ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n", read_buf); @@ -1051,69 +992,51 @@ static int smsc95xx_reset(struct usbnet *dev) read_buf |= NET_IP_ALIGN << 9; ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret); + if (ret < 0) return ret; - } ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing: 0x%08x\n", read_buf); ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write INT_STS: %d\n", ret); + if (ret < 0) return ret; - } ret = smsc95xx_read_reg(dev, ID_REV, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret); + if (ret < 0) return ret; - } netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf); /* Configure GPIO pins as LED outputs */ write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | LED_GPIO_CFG_FDX_LED; ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write LED_GPIO_CFG: %d\n", ret); + if (ret < 0) return ret; - } /* Init Tx */ ret = smsc95xx_write_reg(dev, FLOW, 0); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret); + if (ret < 0) return ret; - } ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write AFC_CFG: %d\n", ret); + if (ret < 0) return ret; - } /* Don't need mac_cr_lock during initialisation */ ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret); + if (ret < 0) return ret; - } /* Init Rx */ /* Set Vlan */ ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write VLAN1: %d\n", ret); + if (ret < 0) return ret; - } /* Enable or disable checksum offload engines */ ret = smsc95xx_set_features(dev->net, dev->net->features); @@ -1131,19 +1054,15 @@ static int smsc95xx_reset(struct usbnet *dev) } ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret); + if (ret < 0) return ret; - } /* enable PHY interrupts */ read_buf |= INT_EP_CTL_PHY_INT_; ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf); - if (ret < 0) { - netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret); + if (ret < 0) return ret; - } ret = smsc95xx_start_tx_path(dev); if (ret < 0) { @@ -1213,10 +1132,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) /* detect device revision as different features may be available */ ret = smsc95xx_read_reg(dev, ID_REV, &val); - if (ret < 0) { - netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret); + if (ret < 0) return ret; - } val >>= 16; if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) || @@ -1261,17 +1178,13 @@ static int smsc95xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask) /* read to clear */ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PHY_INT_SRC\n"); + if (ret < 0) return ret; - } /* enable interrupt source */ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PHY_INT_MASK\n"); + if (ret < 0) return ret; - } ret |= mask; @@ -1287,16 +1200,12 @@ static int smsc95xx_link_ok_nopm(struct usbnet *dev) /* first, a dummy read, needed to latch some MII phys */ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR); - if (ret < 0) { - netdev_warn(dev->net, "Error reading MII_BMSR\n"); + if (ret < 0) return ret; - } ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR); - if (ret < 0) { - netdev_warn(dev->net, "Error reading MII_BMSR\n"); + if (ret < 0) return ret; - } return !!(ret & BMSR_LSTATUS); } @@ -1308,19 +1217,15 @@ static int smsc95xx_enter_suspend0(struct usbnet *dev) int ret; ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PM_CTRL\n"); + if (ret < 0) return ret; - } val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_)); val |= PM_CTL_SUS_MODE_0; ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing PM_CTRL\n"); + if (ret < 0) return ret; - } /* clear wol status */ val &= ~PM_CTL_WUPS_; @@ -1331,15 +1236,11 @@ static int smsc95xx_enter_suspend0(struct usbnet *dev) val |= PM_CTL_WUPS_ED_; ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing PM_CTRL\n"); + if (ret < 0) return ret; - } /* read back PM_CTRL */ ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) - netdev_warn(dev->net, "Error reading PM_CTRL\n"); return ret; } @@ -1360,10 +1261,8 @@ static int smsc95xx_enter_suspend1(struct usbnet *dev) /* enable energy detect power-down mode */ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PHY_MODE_CTRL_STS\n"); + if (ret < 0) return ret; - } ret |= MODE_CTRL_STS_EDPWRDOWN_; @@ -1371,27 +1270,21 @@ static int smsc95xx_enter_suspend1(struct usbnet *dev) /* enter SUSPEND1 mode */ ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PM_CTRL\n"); + if (ret < 0) return ret; - } val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); val |= PM_CTL_SUS_MODE_1; ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing PM_CTRL\n"); + if (ret < 0) return ret; - } /* clear wol status, enable energy detection */ val &= ~PM_CTL_WUPS_; val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_); ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) - netdev_warn(dev->net, "Error writing PM_CTRL\n"); return ret; } @@ -1402,17 +1295,13 @@ static int smsc95xx_enter_suspend2(struct usbnet *dev) int ret; ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PM_CTRL\n"); + if (ret < 0) return ret; - } val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); val |= PM_CTL_SUS_MODE_2; ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) - netdev_warn(dev->net, "Error writing PM_CTRL\n"); return ret; } @@ -1442,32 +1331,24 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) /* disable energy detect (link up) & wake up events */ ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading WUCSR\n"); + if (ret < 0) goto done; - } val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_); ret = smsc95xx_write_reg_nopm(dev, WUCSR, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUCSR\n"); + if (ret < 0) goto done; - } ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PM_CTRL\n"); + if (ret < 0) goto done; - } val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_); ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing PM_CTRL\n"); + if (ret < 0) goto done; - } ret = smsc95xx_enter_suspend2(dev); goto done; @@ -1565,7 +1446,6 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) for (i = 0; i < (wuff_filter_count * 4); i++) { ret = smsc95xx_write_reg_nopm(dev, WUFF, filter_mask[i]); if (ret < 0) { - netdev_warn(dev->net, "Error writing WUFF\n"); kfree(filter_mask); goto done; } @@ -1574,67 +1454,51 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) for (i = 0; i < (wuff_filter_count / 4); i++) { ret = smsc95xx_write_reg_nopm(dev, WUFF, command[i]); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUFF\n"); + if (ret < 0) goto done; - } } for (i = 0; i < (wuff_filter_count / 4); i++) { ret = smsc95xx_write_reg_nopm(dev, WUFF, offset[i]); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUFF\n"); + if (ret < 0) goto done; - } } for (i = 0; i < (wuff_filter_count / 2); i++) { ret = smsc95xx_write_reg_nopm(dev, WUFF, crc[i]); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUFF\n"); + if (ret < 0) goto done; - } } /* clear any pending pattern match packet status */ ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading WUCSR\n"); + if (ret < 0) goto done; - } val |= WUCSR_WUFR_; ret = smsc95xx_write_reg_nopm(dev, WUCSR, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUCSR\n"); + if (ret < 0) goto done; - } } if (pdata->wolopts & WAKE_MAGIC) { /* clear any pending magic packet status */ ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading WUCSR\n"); + if (ret < 0) goto done; - } val |= WUCSR_MPR_; ret = smsc95xx_write_reg_nopm(dev, WUCSR, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUCSR\n"); + if (ret < 0) goto done; - } } /* enable/disable wakeup sources */ ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading WUCSR\n"); + if (ret < 0) goto done; - } if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) { netdev_info(dev->net, "enabling pattern match wakeup\n"); @@ -1653,17 +1517,13 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) } ret = smsc95xx_write_reg_nopm(dev, WUCSR, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUCSR\n"); + if (ret < 0) goto done; - } /* enable wol wakeup source */ ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PM_CTRL\n"); + if (ret < 0) goto done; - } val |= PM_CTL_WOL_EN_; @@ -1672,10 +1532,8 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) val |= PM_CTL_ED_EN_; ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing PM_CTRL\n"); + if (ret < 0) goto done; - } /* enable receiver to enable frame reception */ smsc95xx_start_rx_path(dev, 1); @@ -1702,34 +1560,26 @@ static int smsc95xx_resume(struct usb_interface *intf) if (pdata->wolopts) { /* clear wake-up sources */ ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading WUCSR\n"); + if (ret < 0) return ret; - } val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_); ret = smsc95xx_write_reg_nopm(dev, WUCSR, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing WUCSR\n"); + if (ret < 0) return ret; - } /* clear wake-up status */ ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); - if (ret < 0) { - netdev_warn(dev->net, "Error reading PM_CTRL\n"); + if (ret < 0) return ret; - } val &= ~PM_CTL_WOL_EN_; val |= PM_CTL_WUPS_; ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); - if (ret < 0) { - netdev_warn(dev->net, "Error writing PM_CTRL\n"); + if (ret < 0) return ret; - } } ret = usbnet_resume(intf); -- cgit v0.10.2 From b2d4b150278a5b9fbd3322a764d7b488be975a8d Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 3 Jan 2013 03:00:16 +0000 Subject: smsc95xx: enable dynamic autosuspend This patch enables USB dynamic autosuspend for LAN9500A. This saves very little power in itself, but it allows power saving in upstream hubs/hosts. The earlier devices in this family (LAN9500/9512/9514) do not support this feature. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 124e67f..6a74a68 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -55,6 +55,13 @@ #define FEATURE_PHY_NLP_CROSSOVER (0x02) #define FEATURE_AUTOSUSPEND (0x04) +#define SUSPEND_SUSPEND0 (0x01) +#define SUSPEND_SUSPEND1 (0x02) +#define SUSPEND_SUSPEND2 (0x04) +#define SUSPEND_SUSPEND3 (0x08) +#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \ + SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3) + struct smsc95xx_priv { u32 mac_cr; u32 hash_hi; @@ -62,6 +69,7 @@ struct smsc95xx_priv { u32 wolopts; spinlock_t mac_cr_lock; u8 features; + u8 suspend_flags; }; static bool turbo_mode = true; @@ -1242,6 +1250,8 @@ static int smsc95xx_enter_suspend0(struct usbnet *dev) /* read back PM_CTRL */ ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); + pdata->suspend_flags |= SUSPEND_SUSPEND0; + return ret; } @@ -1286,11 +1296,14 @@ static int smsc95xx_enter_suspend1(struct usbnet *dev) ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + pdata->suspend_flags |= SUSPEND_SUSPEND1; + return ret; } static int smsc95xx_enter_suspend2(struct usbnet *dev) { + struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); u32 val; int ret; @@ -1303,9 +1316,97 @@ static int smsc95xx_enter_suspend2(struct usbnet *dev) ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + pdata->suspend_flags |= SUSPEND_SUSPEND2; + return ret; } +static int smsc95xx_enter_suspend3(struct usbnet *dev) +{ + struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); + u32 val; + int ret; + + ret = smsc95xx_read_reg_nopm(dev, RX_FIFO_INF, &val); + if (ret < 0) + return ret; + + if (val & 0xFFFF) { + netdev_info(dev->net, "rx fifo not empty in autosuspend\n"); + return -EBUSY; + } + + ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val); + if (ret < 0) + return ret; + + val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_); + val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS; + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + if (ret < 0) + return ret; + + /* clear wol status */ + val &= ~PM_CTL_WUPS_; + val |= PM_CTL_WUPS_WOL_; + + ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val); + if (ret < 0) + return ret; + + pdata->suspend_flags |= SUSPEND_SUSPEND3; + + return 0; +} + +static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up) +{ + struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); + int ret; + + if (!netif_running(dev->net)) { + /* interface is ifconfig down so fully power down hw */ + netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n"); + return smsc95xx_enter_suspend2(dev); + } + + if (!link_up) { + /* link is down so enter EDPD mode, but only if device can + * reliably resume from it. This check should be redundant + * as current FEATURE_AUTOSUSPEND parts also support + * FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */ + if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) { + netdev_warn(dev->net, "EDPD not supported\n"); + return -EBUSY; + } + + netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n"); + + /* enable PHY wakeup events for if cable is attached */ + ret = smsc95xx_enable_phy_wakeup_interrupts(dev, + PHY_INT_MASK_ANEG_COMP_); + if (ret < 0) { + netdev_warn(dev->net, "error enabling PHY wakeup ints\n"); + return ret; + } + + netdev_info(dev->net, "entering SUSPEND1 mode\n"); + return smsc95xx_enter_suspend1(dev); + } + + /* enable PHY wakeup events so we remote wakeup if cable is pulled */ + ret = smsc95xx_enable_phy_wakeup_interrupts(dev, + PHY_INT_MASK_LINK_DOWN_); + if (ret < 0) { + netdev_warn(dev->net, "error enabling PHY wakeup ints\n"); + return ret; + } + + netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n"); + return smsc95xx_enter_suspend3(dev); +} + static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) { struct usbnet *dev = usb_get_intfdata(intf); @@ -1313,15 +1414,35 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) u32 val, link_up; int ret; + /* TODO: don't indicate this feature to usb framework if + * our current hardware doesn't have the capability + */ + if ((message.event == PM_EVENT_AUTO_SUSPEND) && + (!(pdata->features & FEATURE_AUTOSUSPEND))) { + netdev_warn(dev->net, "autosuspend not supported\n"); + return -EBUSY; + } + ret = usbnet_suspend(intf, message); if (ret < 0) { netdev_warn(dev->net, "usbnet_suspend error\n"); return ret; } + if (pdata->suspend_flags) { + netdev_warn(dev->net, "error during last resume\n"); + pdata->suspend_flags = 0; + } + /* determine if link is up using only _nopm functions */ link_up = smsc95xx_link_ok_nopm(dev); + if (message.event == PM_EVENT_AUTO_SUSPEND) { + ret = smsc95xx_autosuspend(dev, link_up); + goto done; + } + + /* if we get this far we're not autosuspending */ /* if no wol options set, or if link is down and we're not waking on * PHY activity, enter lowest power SUSPEND2 mode */ @@ -1552,12 +1673,18 @@ static int smsc95xx_resume(struct usb_interface *intf) { struct usbnet *dev = usb_get_intfdata(intf); struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); + u8 suspend_flags = pdata->suspend_flags; int ret; u32 val; BUG_ON(!dev); - if (pdata->wolopts) { + netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags); + + /* do this first to ensure it's cleared even in error case */ + pdata->suspend_flags = 0; + + if (suspend_flags & SUSPEND_ALLMODES) { /* clear wake-up sources */ ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val); if (ret < 0) @@ -1741,6 +1868,26 @@ static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev, return skb; } +static int smsc95xx_manage_power(struct usbnet *dev, int on) +{ + struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); + + dev->intf->needs_remote_wakeup = on; + + if (pdata->features & FEATURE_AUTOSUSPEND) + return 0; + + /* this chip revision doesn't support autosuspend */ + netdev_info(dev->net, "hardware doesn't support USB autosuspend\n"); + + if (on) + usb_autopm_get_interface_no_resume(dev->intf); + else + usb_autopm_put_interface(dev->intf); + + return 0; +} + static const struct driver_info smsc95xx_info = { .description = "smsc95xx USB 2.0 Ethernet", .bind = smsc95xx_bind, @@ -1750,6 +1897,7 @@ static const struct driver_info smsc95xx_info = { .rx_fixup = smsc95xx_rx_fixup, .tx_fixup = smsc95xx_tx_fixup, .status = smsc95xx_status, + .manage_power = smsc95xx_manage_power, .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; @@ -1857,6 +2005,7 @@ static struct usb_driver smsc95xx_driver = { .reset_resume = smsc95xx_resume, .disconnect = usbnet_disconnect, .disable_hub_initiated_lpm = 1, + .supports_autosuspend = 1, }; module_usb_driver(smsc95xx_driver); -- cgit v0.10.2 From 579e1d816260d9f66cb63e4c2911794c9970c293 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20H=C3=BCwe?= Date: Thu, 3 Jan 2013 04:23:50 +0000 Subject: ethernet/broadcom/tg3: Fix sparse warning: constant 0x7fffffffffffffff is so big it is long long Sparse complains that: drivers/net/ethernet/broadcom/tg3.c:5670:55: sparse: constant 0x7fffffffffffffff is so big it is long long (on x86/32 bit) so we suffix the constant with LL in the header file. Reported-by: Fengguang Wu Signed-off-by: Peter Huewe Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index d330e81..247d954 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -774,7 +774,7 @@ #define SG_DIG_AUTONEG_ERROR 0x00000001 #define TG3_TX_TSTAMP_LSB 0x000005c0 #define TG3_TX_TSTAMP_MSB 0x000005c4 -#define TG3_TSTAMP_MASK 0x7fffffffffffffff +#define TG3_TSTAMP_MASK 0x7fffffffffffffffLL /* 0x5c8 --> 0x600 unused */ #define MAC_TX_MAC_STATE_BASE 0x00000600 /* 16 bytes */ #define MAC_RX_MAC_STATE_BASE 0x00000610 /* 20 bytes */ -- cgit v0.10.2 From ff43da86c69d76a726ffe7d1666148960dc1d108 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Thu, 3 Jan 2013 16:04:23 +0000 Subject: NET: FEC: dynamtic check DMA desc buff type MX6 and mx28 support enhanced DMA descriptor buff to support 1588 ptp. But MX25, MX3x, MX5x can't support enhanced DMA descriptor buff. Check fec type and choose correct DMA descriptor buff type. Remove static config CONFIG_FEC_PTP. ptp function will be auto detected. Signed-off-by: Frank Li Acked-by: Sascha Hauer Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index ec490d7..6048dc8 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -26,6 +26,7 @@ config FEC ARCH_MXC || SOC_IMX28) default ARCH_MXC || SOC_IMX28 if ARM select PHYLIB + select PTP_1588_CLOCK ---help--- Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. @@ -92,12 +93,4 @@ config GIANFAR This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx, and MPC86xx family of chips, and the FEC on the 8540. -config FEC_PTP - bool "PTP Hardware Clock (PHC)" - depends on FEC && ARCH_MXC && !SOC_IMX25 && !SOC_IMX27 && !SOC_IMX35 && !SOC_IMX5 - select PTP_1588_CLOCK - --help--- - Say Y here if you want to use PTP Hardware Clock (PHC) in the - driver. Only the basic clock operations have been implemented. - endif # NET_VENDOR_FREESCALE diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile index d4d19b3..b7d58fe 100644 --- a/drivers/net/ethernet/freescale/Makefile +++ b/drivers/net/ethernet/freescale/Makefile @@ -2,8 +2,7 @@ # Makefile for the Freescale network device drivers. # -obj-$(CONFIG_FEC) += fec.o -obj-$(CONFIG_FEC_PTP) += fec_ptp.o +obj-$(CONFIG_FEC) += fec.o fec_ptp.o obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 0704bca..a379319 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -76,6 +76,8 @@ #define FEC_QUIRK_USE_GASKET (1 << 2) /* Controller has GBIT support */ #define FEC_QUIRK_HAS_GBIT (1 << 3) +/* Controller has extend desc buffer */ +#define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4) static struct platform_device_id fec_devtype[] = { { @@ -93,7 +95,8 @@ static struct platform_device_id fec_devtype[] = { .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME, }, { .name = "imx6q-fec", - .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT, + .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | + FEC_QUIRK_HAS_BUFDESC_EX, }, { /* sentinel */ } @@ -140,7 +143,7 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); #endif #endif /* CONFIG_M5272 */ -#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE) +#if (((RX_RING_SIZE + TX_RING_SIZE) * 32) > PAGE_SIZE) #error "FEC: descriptor ring size constants too large" #endif @@ -192,6 +195,24 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); static int mii_cnt; +static struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, int is_ex) +{ + struct bufdesc_ex *ex = (struct bufdesc_ex *)bdp; + if (is_ex) + return (struct bufdesc *)(ex + 1); + else + return bdp + 1; +} + +static struct bufdesc *fec_enet_get_prevdesc(struct bufdesc *bdp, int is_ex) +{ + struct bufdesc_ex *ex = (struct bufdesc_ex *)bdp; + if (is_ex) + return (struct bufdesc *)(ex - 1); + else + return bdp - 1; +} + static void *swap_buffer(void *bufaddr, int len) { int i; @@ -248,7 +269,11 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) */ if (((unsigned long) bufaddr) & FEC_ALIGNMENT) { unsigned int index; - index = bdp - fep->tx_bd_base; + if (fep->bufdesc_ex) + index = (struct bufdesc_ex *)bdp - + (struct bufdesc_ex *)fep->tx_bd_base; + else + index = bdp - fep->tx_bd_base; memcpy(fep->tx_bounce[index], skb->data, skb->len); bufaddr = fep->tx_bounce[index]; } @@ -280,17 +305,19 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) | BD_ENET_TX_LAST | BD_ENET_TX_TC); bdp->cbd_sc = status; -#ifdef CONFIG_FEC_PTP - bdp->cbd_bdu = 0; - if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && + if (fep->bufdesc_ex) { + + struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; + ebdp->cbd_bdu = 0; + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && fep->hwts_tx_en)) { - bdp->cbd_esc = (BD_ENET_TX_TS | BD_ENET_TX_INT); + ebdp->cbd_esc = (BD_ENET_TX_TS | BD_ENET_TX_INT); skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; - } else { + } else { - bdp->cbd_esc = BD_ENET_TX_INT; + ebdp->cbd_esc = BD_ENET_TX_INT; + } } -#endif /* Trigger transmission start */ writel(0, fep->hwp + FEC_X_DES_ACTIVE); @@ -298,7 +325,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (status & BD_ENET_TX_WRAP) bdp = fep->tx_bd_base; else - bdp++; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); if (bdp == fep->dirty_tx) { fep->tx_full = 1; @@ -359,8 +386,12 @@ fec_restart(struct net_device *ndev, int duplex) /* Set receive and transmit descriptor base. */ writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); - writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, - fep->hwp + FEC_X_DES_START); + if (fep->bufdesc_ex) + writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc_ex) + * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); + else + writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) + * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; fep->cur_rx = fep->rx_bd_base; @@ -448,17 +479,16 @@ fec_restart(struct net_device *ndev, int duplex) writel(1 << 8, fep->hwp + FEC_X_WMRK); } -#ifdef CONFIG_FEC_PTP - ecntl |= (1 << 4); -#endif + if (fep->bufdesc_ex) + ecntl |= (1 << 4); /* And last, enable the transmit and receive processing */ writel(ecntl, fep->hwp + FEC_ECNTRL); writel(0, fep->hwp + FEC_R_DES_ACTIVE); -#ifdef CONFIG_FEC_PTP - fec_ptp_start_cyclecounter(ndev); -#endif + if (fep->bufdesc_ex) + fec_ptp_start_cyclecounter(ndev); + /* Enable interrupts we wish to service */ writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); } @@ -544,19 +574,20 @@ fec_enet_tx(struct net_device *ndev) ndev->stats.tx_packets++; } -#ifdef CONFIG_FEC_PTP - if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) { + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) && + fep->bufdesc_ex) { struct skb_shared_hwtstamps shhwtstamps; unsigned long flags; + struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; memset(&shhwtstamps, 0, sizeof(shhwtstamps)); spin_lock_irqsave(&fep->tmreg_lock, flags); shhwtstamps.hwtstamp = ns_to_ktime( - timecounter_cyc2time(&fep->tc, bdp->ts)); + timecounter_cyc2time(&fep->tc, ebdp->ts)); spin_unlock_irqrestore(&fep->tmreg_lock, flags); skb_tstamp_tx(skb, &shhwtstamps); } -#endif + if (status & BD_ENET_TX_READY) printk("HEY! Enet xmit interrupt and TX_READY.\n"); @@ -575,7 +606,7 @@ fec_enet_tx(struct net_device *ndev) if (status & BD_ENET_TX_WRAP) bdp = fep->tx_bd_base; else - bdp++; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); /* Since we have freed up a buffer, the ring is no longer full */ @@ -683,21 +714,23 @@ fec_enet_rx(struct net_device *ndev) skb_put(skb, pkt_len - 4); /* Make room */ skb_copy_to_linear_data(skb, data, pkt_len - 4); skb->protocol = eth_type_trans(skb, ndev); -#ifdef CONFIG_FEC_PTP + /* Get receive timestamp from the skb */ - if (fep->hwts_rx_en) { + if (fep->hwts_rx_en && fep->bufdesc_ex) { struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb); unsigned long flags; + struct bufdesc_ex *ebdp = + (struct bufdesc_ex *)bdp; memset(shhwtstamps, 0, sizeof(*shhwtstamps)); spin_lock_irqsave(&fep->tmreg_lock, flags); shhwtstamps->hwtstamp = ns_to_ktime( - timecounter_cyc2time(&fep->tc, bdp->ts)); + timecounter_cyc2time(&fep->tc, ebdp->ts)); spin_unlock_irqrestore(&fep->tmreg_lock, flags); } -#endif + if (!skb_defer_rx_timestamp(skb)) netif_rx(skb); } @@ -712,17 +745,19 @@ rx_processing_done: status |= BD_ENET_RX_EMPTY; bdp->cbd_sc = status; -#ifdef CONFIG_FEC_PTP - bdp->cbd_esc = BD_ENET_RX_INT; - bdp->cbd_prot = 0; - bdp->cbd_bdu = 0; -#endif + if (fep->bufdesc_ex) { + struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; + + ebdp->cbd_esc = BD_ENET_RX_INT; + ebdp->cbd_prot = 0; + ebdp->cbd_bdu = 0; + } /* Update BD pointer to next entry */ if (status & BD_ENET_RX_WRAP) bdp = fep->rx_bd_base; else - bdp++; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); /* Doing this here will keep the FEC running while we process * incoming frames. On a heavily loaded network, we should be * able to keep up at the expense of system resources. @@ -1157,10 +1192,9 @@ static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) if (!phydev) return -ENODEV; -#ifdef CONFIG_FEC_PTP - if (cmd == SIOCSHWTSTAMP) + if (cmd == SIOCSHWTSTAMP && fep->bufdesc_ex) return fec_ptp_ioctl(ndev, rq, cmd); -#endif + return phy_mii_ioctl(phydev, rq, cmd); } @@ -1180,7 +1214,7 @@ static void fec_enet_free_buffers(struct net_device *ndev) FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); if (skb) dev_kfree_skb(skb); - bdp++; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); } bdp = fep->tx_bd_base; @@ -1207,14 +1241,17 @@ static int fec_enet_alloc_buffers(struct net_device *ndev) bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, skb->data, FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); bdp->cbd_sc = BD_ENET_RX_EMPTY; -#ifdef CONFIG_FEC_PTP - bdp->cbd_esc = BD_ENET_RX_INT; -#endif - bdp++; + + if (fep->bufdesc_ex) { + struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; + ebdp->cbd_esc = BD_ENET_RX_INT; + } + + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); } /* Set the last buffer to wrap. */ - bdp--; + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); bdp->cbd_sc |= BD_SC_WRAP; bdp = fep->tx_bd_base; @@ -1224,14 +1261,16 @@ static int fec_enet_alloc_buffers(struct net_device *ndev) bdp->cbd_sc = 0; bdp->cbd_bufaddr = 0; -#ifdef CONFIG_FEC_PTP - bdp->cbd_esc = BD_ENET_RX_INT; -#endif - bdp++; + if (fep->bufdesc_ex) { + struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; + ebdp->cbd_esc = BD_ENET_RX_INT; + } + + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); } /* Set the last buffer to wrap. */ - bdp--; + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); bdp->cbd_sc |= BD_SC_WRAP; return 0; @@ -1444,7 +1483,11 @@ static int fec_enet_init(struct net_device *ndev) /* Set receive and transmit descriptor base. */ fep->rx_bd_base = cbd_base; - fep->tx_bd_base = cbd_base + RX_RING_SIZE; + if (fep->bufdesc_ex) + fep->tx_bd_base = (struct bufdesc *) + (((struct bufdesc_ex *)cbd_base) + RX_RING_SIZE); + else + fep->tx_bd_base = cbd_base + RX_RING_SIZE; /* The FEC Ethernet specific entries in the device structure */ ndev->watchdog_timeo = TX_TIMEOUT; @@ -1457,11 +1500,11 @@ static int fec_enet_init(struct net_device *ndev) /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = 0; - bdp++; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); } /* Set the last buffer to wrap */ - bdp--; + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); bdp->cbd_sc |= BD_SC_WRAP; /* ...and the same for transmit */ @@ -1471,11 +1514,11 @@ static int fec_enet_init(struct net_device *ndev) /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = 0; bdp->cbd_bufaddr = 0; - bdp++; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); } /* Set the last buffer to wrap */ - bdp--; + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); bdp->cbd_sc |= BD_SC_WRAP; fec_restart(ndev, 0); @@ -1574,6 +1617,8 @@ fec_probe(struct platform_device *pdev) fep->pdev = pdev; fep->dev_id = dev_id++; + fep->bufdesc_ex = 0; + if (!fep->hwp) { ret = -ENOMEM; goto failed_ioremap; @@ -1628,19 +1673,19 @@ fec_probe(struct platform_device *pdev) goto failed_clk; } -#ifdef CONFIG_FEC_PTP fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp"); + fep->bufdesc_ex = + pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX; if (IS_ERR(fep->clk_ptp)) { ret = PTR_ERR(fep->clk_ptp); - goto failed_clk; + fep->bufdesc_ex = 0; } -#endif clk_prepare_enable(fep->clk_ahb); clk_prepare_enable(fep->clk_ipg); -#ifdef CONFIG_FEC_PTP - clk_prepare_enable(fep->clk_ptp); -#endif + if (!IS_ERR(fep->clk_ptp)) + clk_prepare_enable(fep->clk_ptp); + reg_phy = devm_regulator_get(&pdev->dev, "phy"); if (!IS_ERR(reg_phy)) { ret = regulator_enable(reg_phy); @@ -1668,9 +1713,8 @@ fec_probe(struct platform_device *pdev) if (ret) goto failed_register; -#ifdef CONFIG_FEC_PTP - fec_ptp_init(ndev, pdev); -#endif + if (fep->bufdesc_ex) + fec_ptp_init(ndev, pdev); return 0; @@ -1681,9 +1725,8 @@ failed_init: failed_regulator: clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_ipg); -#ifdef CONFIG_FEC_PTP - clk_disable_unprepare(fep->clk_ptp); -#endif + if (!IS_ERR(fep->clk_ptp)) + clk_disable_unprepare(fep->clk_ptp); failed_pin: failed_clk: for (i = 0; i < FEC_IRQ_NUM; i++) { @@ -1716,12 +1759,10 @@ fec_drv_remove(struct platform_device *pdev) if (irq > 0) free_irq(irq, ndev); } -#ifdef CONFIG_FEC_PTP del_timer_sync(&fep->time_keep); clk_disable_unprepare(fep->clk_ptp); if (fep->ptp_clock) ptp_clock_unregister(fep->ptp_clock); -#endif clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_ipg); iounmap(fep->hwp); diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index c5a3bc1..4862394 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -13,11 +13,9 @@ #define FEC_H /****************************************************************************/ -#ifdef CONFIG_FEC_PTP #include #include #include -#endif #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ defined(CONFIG_M520x) || defined(CONFIG_M532x) || \ @@ -94,14 +92,17 @@ struct bufdesc { unsigned short cbd_datlen; /* Data length */ unsigned short cbd_sc; /* Control and status info */ unsigned long cbd_bufaddr; /* Buffer address */ -#ifdef CONFIG_FEC_PTP +}; + +struct bufdesc_ex { + struct bufdesc desc; unsigned long cbd_esc; unsigned long cbd_prot; unsigned long cbd_bdu; unsigned long ts; unsigned short res0[4]; -#endif }; + #else struct bufdesc { unsigned short cbd_sc; /* Control and status info */ @@ -203,9 +204,7 @@ struct fec_enet_private { struct clk *clk_ipg; struct clk *clk_ahb; -#ifdef CONFIG_FEC_PTP struct clk *clk_ptp; -#endif /* The saved address of a sent-in-place packet/buffer, for skfree(). */ unsigned char *tx_bounce[TX_RING_SIZE]; @@ -243,8 +242,8 @@ struct fec_enet_private { int full_duplex; struct completion mdio_done; int irq[FEC_IRQ_NUM]; + int bufdesc_ex; -#ifdef CONFIG_FEC_PTP struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_caps; unsigned long last_overflow_check; @@ -257,15 +256,12 @@ struct fec_enet_private { int hwts_rx_en; int hwts_tx_en; struct timer_list time_keep; -#endif }; -#ifdef CONFIG_FEC_PTP void fec_ptp_init(struct net_device *ndev, struct platform_device *pdev); void fec_ptp_start_cyclecounter(struct net_device *ndev); int fec_ptp_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd); -#endif /****************************************************************************/ #endif /* FEC_H */ -- cgit v0.10.2 From b7dc8c3959fd43bfa0dbcf65375628c86665cb94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Fri, 4 Jan 2013 03:58:04 +0000 Subject: ndisc: Remove unused space at tail of skb for ndisc messages. (TAKE 3) Currently, the size of skb allocated for NDISC is MAX_HEADER + LL_RESERVED_SPACE(dev) + packet length + dev->needed_tailroom, but only LL_RESERVED_SPACE(dev) bytes is "reserved" for headers. As a result, the skb looks like this (after construction of the message): head data tail end +--------------------------------------------------------------+ + | | | | +--------------------------------------------------------------+ |<-hlen---->|<---ipv6 packet------>|<--tlen-->|<--MAX_HEADER-->| =LL_ = dev RESERVED_ ->needed_ SPACE(dev) tailroom As the name implies, "MAX_HEADER" is used for headers, and should be "reserved" in prior to packet construction. Or, if some space is really required at the tail of ther skb, it should be explicitly documented. We have several option after construction of NDISC message: Option 1: head data tail end +---------------------------------------------+ + | | | +---------------------------------------------+ |<-hlen---->|<---ipv6 packet------>|<--tlen-->| =LL_ = dev RESERVED_ ->needed_ SPACE(dev) tailroom Option 2: head data tail end +--------------------------------------------------+ + | | | +--------------------------------------------------+ |<--MAX_HEADER-->|<---ipv6 packet------>|<--tlen-->| = dev ->needed_ tailroom Option 3: head data tail end +--------------------------------------------------------------+ + | | | | +--------------------------------------------------------------+ |<--MAX_HEADER-->|<-hlen---->|<---ipv6 packet------>|<--tlen-->| =LL_ = dev RESERVED_ ->needed_ SPACE(dev) tailroom Our tunnel drivers try expanding headroom and the space for tunnel encapsulation was not a mandatory space -- so we are not seeing bugs here --, but just for optimization for performance critial situations. Since NDISC messages are not performance critical unlike TCP, and as we know outgoing device, LL_RESERVED_SPACE(dev) should be just enough for the device in most (if not all) cases: LL_RESERVED_SPACE(dev) <= LL_MAX_HEADER <= MAX_HEADER Note that LL_RESERVED_SPACE(dev) is also enough for NDISC over SIT (e.g., ISATAP). So, I think Option 1 is just fine here. Signed-off-by: YOSHIFUJI Hideaki Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 6574175..4c4ccf7 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -395,7 +395,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, len += ndisc_opt_addr_space(dev); skb = sock_alloc_send_skb(sk, - (MAX_HEADER + sizeof(struct ipv6hdr) + + (sizeof(struct ipv6hdr) + len + hlen + tlen), 1, &err); if (!skb) { @@ -1439,7 +1439,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) hlen = LL_RESERVED_SPACE(dev); tlen = dev->needed_tailroom; buff = sock_alloc_send_skb(sk, - (MAX_HEADER + sizeof(struct ipv6hdr) + + (sizeof(struct ipv6hdr) + len + hlen + tlen), 1, &err); if (buff == NULL) { -- cgit v0.10.2 From c65a17f4f51231f175336048b49b85da7c24fb6c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 6 Jan 2013 12:51:07 +0000 Subject: tg3: Add support for new 5762 ASIC Add basic support for 5762 which is a 57765_PLUS class device. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 78ea90c..01e3201 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2632,6 +2632,9 @@ out: tg3_writephy(tp, MII_TG3_FET_PTEST, 0x12); } + if (tp->pci_chip_rev_id == CHIPREV_ID_5762_A0) + tg3_phydsp_write(tp, 0xffb, 0x4000); + tg3_phy_toggle_automdix(tp, 1); tg3_phy_set_wirespeed(tp); return 0; @@ -4037,6 +4040,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, val); /* Fall through */ case ASIC_REV_5720: + case ASIC_REV_5762: if (!tg3_phydsp_read(tp, MII_TG3_DSP_CH34TP2, &val)) tg3_phydsp_write(tp, MII_TG3_DSP_CH34TP2, val | MII_TG3_DSP_CH34TP2_HIBW01); @@ -5484,7 +5488,8 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) | (6 << TX_LENGTHS_IPG_SHIFT); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) val |= tr32(MAC_TX_LENGTHS) & (TX_LENGTHS_JMB_FRM_LEN_MSK | TX_LENGTHS_CNT_DWN_VAL_MSK); @@ -8672,7 +8677,8 @@ static void tg3_rings_reset(struct tg3 *tp) limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16; else if (tg3_flag(tp, 5717_PLUS)) limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 4; - else if (tg3_flag(tp, 57765_CLASS)) + else if (tg3_flag(tp, 57765_CLASS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2; else limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE; @@ -8689,6 +8695,7 @@ static void tg3_rings_reset(struct tg3 *tp) else if (!tg3_flag(tp, 5705_PLUS)) limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16; else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762 || tg3_flag(tp, 57765_CLASS)) limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4; else @@ -8979,9 +8986,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) /* Enable MAC control of LPI */ if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) { - tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, - TG3_CPMU_EEE_LNKIDL_PCIE_NL0 | - TG3_CPMU_EEE_LNKIDL_UART_IDL); + val = TG3_CPMU_EEE_LNKIDL_PCIE_NL0 | + TG3_CPMU_EEE_LNKIDL_UART_IDL; + if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) + val |= TG3_CPMU_EEE_LNKIDL_APE_TX_MT; + + tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, val); tw32_f(TG3_CPMU_EEE_CTRL, TG3_CPMU_EEE_CTRL_EXIT_20_1_US); @@ -9156,7 +9166,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) val &= ~DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK; if (!tg3_flag(tp, 57765_CLASS) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) val |= DMA_RWCTRL_TAGGED_STAT_WA; tw32(TG3PCI_DMA_RW_CTRL, val | tp->dma_rwctrl); } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 && @@ -9308,7 +9319,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS, val | BDINFO_FLAGS_USE_EXT_RECV); if (!tg3_flag(tp, USE_JUMBO_BDFLAG) || - tg3_flag(tp, 57765_CLASS)) + tg3_flag(tp, 57765_CLASS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR, NIC_SRAM_RX_JUMBO_BUFFER_DESC); } else { @@ -9350,7 +9362,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) (6 << TX_LENGTHS_IPG_SHIFT) | (32 << TX_LENGTHS_SLOT_TIME_SHIFT); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) val |= tr32(MAC_TX_LENGTHS) & (TX_LENGTHS_JMB_FRM_LEN_MSK | TX_LENGTHS_CNT_DWN_VAL_MSK); @@ -9404,7 +9417,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) rdmac_mode |= tr32(RDMAC_MODE) & RDMAC_MODE_H2BNC_VLAN_DET; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || @@ -9412,8 +9426,16 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 || tg3_flag(tp, 57765_PLUS)) { - val = tr32(TG3_RDMA_RSRVCTRL_REG); - if (tp->pci_chip_rev_id == CHIPREV_ID_5719_A0) { + u32 tgtreg; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tgtreg = TG3_RDMA_RSRVCTRL_REG2; + else + tgtreg = TG3_RDMA_RSRVCTRL_REG; + + val = tr32(tgtreg); + if (tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { val &= ~(TG3_RDMA_RSRVCTRL_TXMRGN_MASK | TG3_RDMA_RSRVCTRL_FIFO_LWM_MASK | TG3_RDMA_RSRVCTRL_FIFO_HWM_MASK); @@ -9421,14 +9443,21 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) TG3_RDMA_RSRVCTRL_FIFO_LWM_1_5K | TG3_RDMA_RSRVCTRL_FIFO_HWM_1_5K; } - tw32(TG3_RDMA_RSRVCTRL_REG, - val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX); + tw32(tgtreg, val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX); } if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { - val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val | + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + u32 tgtreg; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tgtreg = TG3_LSO_RD_DMA_CRPTEN_CTRL2; + else + tgtreg = TG3_LSO_RD_DMA_CRPTEN_CTRL; + + val = tr32(tgtreg); + tw32(tgtreg, val | TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K | TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K); } @@ -9661,7 +9690,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) tp->tx_mode |= TX_MODE_MBUF_LOCKUP_FIX; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { val = TX_MODE_JMB_FRM_LEN | TX_MODE_CNT_DN_MODE; tp->tx_mode &= ~val; tp->tx_mode |= tr32(MAC_TX_MODE) & val; @@ -12342,7 +12372,8 @@ static int tg3_test_memory(struct tg3 *tp) if (tg3_flag(tp, 5717_PLUS)) mem_tbl = mem_tbl_5717; - else if (tg3_flag(tp, 57765_CLASS)) + else if (tg3_flag(tp, 57765_CLASS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) mem_tbl = mem_tbl_57765; else if (tg3_flag(tp, 5755_PLUS)) mem_tbl = mem_tbl_5755; @@ -14296,6 +14327,7 @@ static int tg3_phy_probe(struct tg3 *tp) if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) && (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762 || (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 && tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) || (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 && @@ -14785,7 +14817,10 @@ static void tg3_detect_asic_rev(struct tg3 *tp, u32 misc_ctrl_reg) tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717_C || tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 || tp->pdev->device == TG3PCI_DEVICE_TIGON3_5719 || - tp->pdev->device == TG3PCI_DEVICE_TIGON3_5720) + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5720 || + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5762 || + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5725 || + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5727) reg = TG3PCI_GEN2_PRODID_ASICREV; else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57781 || tp->pdev->device == TG3PCI_DEVICE_TIGON3_57785 || @@ -14822,7 +14857,8 @@ static void tg3_detect_asic_rev(struct tg3 *tp, u32 misc_ctrl_reg) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766) tg3_flag_set(tp, 57765_CLASS); - if (tg3_flag(tp, 57765_CLASS) || tg3_flag(tp, 5717_PLUS)) + if (tg3_flag(tp, 57765_CLASS) || tg3_flag(tp, 5717_PLUS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) tg3_flag_set(tp, 57765_PLUS); /* Intentionally exclude ASIC_REV_5906 */ @@ -15113,7 +15149,8 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) tg3_flag_set(tp, LRG_PROD_RING_CAP); if (tg3_flag(tp, 57765_PLUS) && @@ -15481,7 +15518,8 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Initialize data/descriptor byte/word swapping. */ val = tr32(GRC_MODE); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) val &= (GRC_MODE_BYTE_SWAP_B2HRX_DATA | GRC_MODE_WORD_SWAP_B2HRX_DATA | GRC_MODE_B2HRX_ENABLE | @@ -16238,6 +16276,7 @@ static char *tg3_phy_string(struct tg3 *tp) case TG3_PHY_ID_BCM57765: return "57765"; case TG3_PHY_ID_BCM5719C: return "5719C"; case TG3_PHY_ID_BCM5720C: return "5720C"; + case TG3_PHY_ID_BCM5762: return "5762C"; case TG3_PHY_ID_BCM8002: return "8002/serdes"; case 0: return "serdes"; default: return "unknown"; @@ -16413,7 +16452,10 @@ static int tg3_init_one(struct pci_dev *pdev, tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717_C || tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 || tp->pdev->device == TG3PCI_DEVICE_TIGON3_5719 || - tp->pdev->device == TG3PCI_DEVICE_TIGON3_5720) { + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5720 || + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5762 || + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5725 || + tp->pdev->device == TG3PCI_DEVICE_TIGON3_5727) { tg3_flag_set(tp, ENABLE_APE); tp->aperegs = pci_ioremap_bar(pdev, BAR_2); if (!tp->aperegs) { @@ -16608,7 +16650,8 @@ static int tg3_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) tg3_flag_set(tp, PTP_CAPABLE); if (tg3_flag(tp, 5717_PLUS)) { diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 247d954..46d43f7 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -65,6 +65,9 @@ #define TG3PCI_DEVICE_TIGON3_57766 0x1686 #define TG3PCI_DEVICE_TIGON3_57786 0x16b3 #define TG3PCI_DEVICE_TIGON3_57782 0x16b7 +#define TG3PCI_DEVICE_TIGON3_5762 0x1687 +#define TG3PCI_DEVICE_TIGON3_5725 0x1643 +#define TG3PCI_DEVICE_TIGON3_5727 0x16f3 /* 0x04 --> 0x2c unused */ #define TG3PCI_SUBVENDOR_ID_BROADCOM PCI_VENDOR_ID_BROADCOM #define TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6 0x1644 @@ -159,6 +162,7 @@ #define CHIPREV_ID_57765_A0 0x57785000 #define CHIPREV_ID_5719_A0 0x05719000 #define CHIPREV_ID_5720_A0 0x05720000 +#define CHIPREV_ID_5762_A0 0x05762000 #define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12) #define ASIC_REV_5700 0x07 #define ASIC_REV_5701 0x00 @@ -182,6 +186,7 @@ #define ASIC_REV_5719 0x5719 #define ASIC_REV_5720 0x5720 #define ASIC_REV_57766 0x57766 +#define ASIC_REV_5762 0x5762 #define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8) #define CHIPREV_5700_AX 0x70 #define CHIPREV_5700_BX 0x71 @@ -1178,6 +1183,7 @@ #define TG3_CPMU_EEE_LNKIDL_CTRL 0x000036bc #define TG3_CPMU_EEE_LNKIDL_PCIE_NL0 0x01000000 #define TG3_CPMU_EEE_LNKIDL_UART_IDL 0x00000004 +#define TG3_CPMU_EEE_LNKIDL_APE_TX_MT 0x00000002 /* 0x36c0 --> 0x36d0 unused */ #define TG3_CPMU_EEE_CTRL 0x000036d0 @@ -1400,7 +1406,10 @@ #define RDMAC_STATUS_FIFOURUN 0x00000080 #define RDMAC_STATUS_FIFOOREAD 0x00000100 #define RDMAC_STATUS_LNGREAD 0x00000200 -/* 0x4808 --> 0x4900 unused */ +/* 0x4808 --> 0x4890 unused */ + +#define TG3_RDMA_RSRVCTRL_REG2 0x00004890 +#define TG3_LSO_RD_DMA_CRPTEN_CTRL2 0x000048a0 #define TG3_RDMA_RSRVCTRL_REG 0x00004900 #define TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX 0x00000004 @@ -1910,6 +1919,8 @@ #define FLASH_5717VENDOR_ST_45USPT 0x03400001 #define FLASH_5720_EEPROM_HD 0x00000001 #define FLASH_5720_EEPROM_LD 0x00000003 +#define FLASH_5762_EEPROM_HD 0x02000001 +#define FLASH_5762_EEPROM_LD 0x02000003 #define FLASH_5720VENDOR_M_ATMEL_DB011D 0x01000000 #define FLASH_5720VENDOR_M_ATMEL_DB021D 0x01000002 #define FLASH_5720VENDOR_M_ATMEL_DB041D 0x01000001 @@ -3206,6 +3217,7 @@ struct tg3 { #define TG3_PHY_ID_BCM57765 0x5c0d8a40 #define TG3_PHY_ID_BCM5719C 0x5c0d8a20 #define TG3_PHY_ID_BCM5720C 0x5c0d8b60 +#define TG3_PHY_ID_BCM5762 0x85803780 #define TG3_PHY_ID_BCM5906 0xdc00ac40 #define TG3_PHY_ID_BCM8002 0x60010140 #define TG3_PHY_ID_INVALID 0xffffffff @@ -3230,6 +3242,7 @@ struct tg3 { (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \ (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \ (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \ + (X) == TG3_PHY_ID_BCM5720C || (X) == TG3_PHY_ID_BCM5762 || \ (X) == TG3_PHY_ID_BCM8002) u32 phy_flags; -- cgit v0.10.2 From c86a8560e2dd800b619056c25b3f0ab8f5c59156 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 6 Jan 2013 12:51:08 +0000 Subject: tg3: Add NVRAM support for 5762 Detect NVRAM types for 5762 and read OTP firmware version. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 01e3201..6eab7d7 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -330,6 +330,9 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = { {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57762)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5762)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5725)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5727)}, {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)}, {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)}, {PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)}, @@ -13714,6 +13717,20 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) nvcfg1 = tr32(NVRAM_CFG1); nvmpinstrp = nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + if (!(nvcfg1 & NVRAM_CFG1_5762VENDOR_MASK)) { + tg3_flag_set(tp, NO_NVRAM); + return; + } + + switch (nvmpinstrp) { + case FLASH_5762_EEPROM_HD: + nvmpinstrp = FLASH_5720_EEPROM_HD; + case FLASH_5762_EEPROM_LD: + nvmpinstrp = FLASH_5720_EEPROM_LD; + } + } + switch (nvmpinstrp) { case FLASH_5720_EEPROM_HD: case FLASH_5720_EEPROM_LD: @@ -13817,6 +13834,17 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) tg3_nvram_get_pagesize(tp, nvcfg1); if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528) tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS); + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + u32 val; + + if (tg3_nvram_read(tp, 0, &val)) + return; + + if (val != TG3_EEPROM_MAGIC && + (val & TG3_EEPROM_MAGIC_FW_MSK) != TG3_EEPROM_MAGIC_FW) + tg3_flag_set(tp, NO_NVRAM); + } } /* Chips other than 5700/5701 use the NVRAM for fetching info. */ @@ -13866,7 +13894,8 @@ static void tg3_nvram_init(struct tg3 *tp) else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) tg3_get_5717_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) tg3_get_5720_nvram_info(tp); else tg3_get_nvram_info(tp); @@ -14168,6 +14197,39 @@ done: device_set_wakeup_capable(&tp->pdev->dev, false); } +static int tg3_ape_otp_read(struct tg3 *tp, u32 offset, u32 *val) +{ + int i, err; + u32 val2, off = offset * 8; + + err = tg3_nvram_lock(tp); + if (err) + return err; + + tg3_ape_write32(tp, TG3_APE_OTP_ADDR, off | APE_OTP_ADDR_CPU_ENABLE); + tg3_ape_write32(tp, TG3_APE_OTP_CTRL, APE_OTP_CTRL_PROG_EN | + APE_OTP_CTRL_CMD_RD | APE_OTP_CTRL_START); + tg3_ape_read32(tp, TG3_APE_OTP_CTRL); + udelay(10); + + for (i = 0; i < 100; i++) { + val2 = tg3_ape_read32(tp, TG3_APE_OTP_STATUS); + if (val2 & APE_OTP_STATUS_CMD_DONE) { + *val = tg3_ape_read32(tp, TG3_APE_OTP_RD_DATA); + break; + } + udelay(10); + } + + tg3_ape_write32(tp, TG3_APE_OTP_CTRL, 0); + + tg3_nvram_unlock(tp); + if (val2 & APE_OTP_STATUS_CMD_DONE) + return 0; + + return -EBUSY; +} + static int tg3_issue_otp_command(struct tg3 *tp, u32 cmd) { int i; @@ -14708,6 +14770,8 @@ static void tg3_read_dash_ver(struct tg3 *tp) if (tg3_flag(tp, APE_HAS_NCSI)) fwtype = "NCSI"; + else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5725) + fwtype = "SMASH"; else fwtype = "DASH"; @@ -14721,6 +14785,31 @@ static void tg3_read_dash_ver(struct tg3 *tp) (apedata & APE_FW_VERSION_BLDMSK)); } +static void tg3_read_otp_ver(struct tg3 *tp) +{ + u32 val, val2; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + return; + + if (!tg3_ape_otp_read(tp, OTP_ADDRESS_MAGIC0, &val) && + !tg3_ape_otp_read(tp, OTP_ADDRESS_MAGIC0 + 4, &val2) && + TG3_OTP_MAGIC0_VALID(val)) { + u64 val64 = (u64) val << 32 | val2; + u32 ver = 0; + int i, vlen; + + for (i = 0; i < 7; i++) { + if ((val64 & 0xff) == 0) + break; + ver = val64 & 0xff; + val64 >>= 8; + } + vlen = strlen(tp->fw_ver); + snprintf(&tp->fw_ver[vlen], TG3_VER_SIZE - vlen, " .%02d", ver); + } +} + static void tg3_read_fw_ver(struct tg3 *tp) { u32 val; @@ -14731,6 +14820,7 @@ static void tg3_read_fw_ver(struct tg3 *tp) if (tg3_flag(tp, NO_NVRAM)) { strcat(tp->fw_ver, "sb"); + tg3_read_otp_ver(tp); return; } @@ -15428,6 +15518,10 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) GRC_LCLCTRL_GPIO_OUTPUT0; } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tp->grc_local_ctrl |= + tr32(GRC_LOCAL_CTRL) & GRC_LCLCTRL_GPIO_UART_SEL; + /* Switch out of Vaux if it is a NIC */ tg3_pwrsrc_switch_to_vmain(tp); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 46d43f7..39afc0e 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -1859,6 +1859,7 @@ #define FLASH_VENDOR_SST_SMALL 0x00000001 #define FLASH_VENDOR_SST_LARGE 0x02000001 #define NVRAM_CFG1_5752VENDOR_MASK 0x03c00003 +#define NVRAM_CFG1_5762VENDOR_MASK 0x03e00003 #define FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ 0x00000000 #define FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ 0x02000000 #define FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED 0x02000003 @@ -2376,6 +2377,20 @@ #define APE_LOCK_REQ_DRIVER 0x00001000 #define TG3_APE_LOCK_GRANT 0x004c #define APE_LOCK_GRANT_DRIVER 0x00001000 +#define TG3_APE_OTP_CTRL 0x00e8 +#define APE_OTP_CTRL_PROG_EN 0x200000 +#define APE_OTP_CTRL_CMD_RD 0x000000 +#define APE_OTP_CTRL_START 0x000001 +#define TG3_APE_OTP_STATUS 0x00ec +#define APE_OTP_STATUS_CMD_DONE 0x000001 +#define TG3_APE_OTP_ADDR 0x00f0 +#define APE_OTP_ADDR_CPU_ENABLE 0x80000000 +#define TG3_APE_OTP_RD_DATA 0x00f8 + +#define OTP_ADDRESS_MAGIC0 0x00000050 +#define TG3_OTP_MAGIC0_VALID(val) \ + ((((val) & 0xf0000000) == 0xa0000000) ||\ + (((val) & 0x0f000000) == 0x0a000000)) /* APE shared memory. Accessible through BAR1 */ #define TG3_APE_SHMEM_BASE 0x4000 -- cgit v0.10.2 From 857001f06f6bec17cafd567a03b24968902a4744 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 6 Jan 2013 12:51:09 +0000 Subject: tg3: Improve PCI function number detection. Simplify the code to detect PCI function number on 5717, 5719, and 5720. If shared memory does not have proper signature, read the function number from register directly. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 6eab7d7..3596b7b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -15441,21 +15441,18 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) &val); tp->pci_fn = val & 0x7; } - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) { - tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val); - if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) == - NIC_SRAM_CPMUSTAT_SIG) { - tp->pci_fn = val & TG3_CPMU_STATUS_FMSK_5717; - tp->pci_fn = tp->pci_fn ? 1 : 0; - } - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || + } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val); - if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) == - NIC_SRAM_CPMUSTAT_SIG) { + if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) != NIC_SRAM_CPMUSTAT_SIG) + val = tr32(TG3_CPMU_STATUS); + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) + tp->pci_fn = (val & TG3_CPMU_STATUS_FMSK_5717) ? 1 : 0; + else tp->pci_fn = (val & TG3_CPMU_STATUS_FMSK_5719) >> TG3_CPMU_STATUS_FSHFT_5719; - } } /* Get eeprom hw config before calling tg3_set_power_state(). -- cgit v0.10.2 From b681b65d4fc0cad468c4caad02b0bc93d59b00df Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Sun, 6 Jan 2013 12:51:10 +0000 Subject: tg3: Remove IS_ENABLED(CONFIG_HWMON) check Commit de0a41484c47d783dd4d442914815076aa2caac2 added Kconfig logic to select HWMON and removed all the IS_ENABLED(CONFIG_HWMON) checks in the tg3.c file. It missed this one check in the header. Update version to 3.129 and update copyright year. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3596b7b..bc4d989 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4,7 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005-2012 Broadcom Corporation. + * Copyright (C) 2005-2013 Broadcom Corporation. * * Firmware is: * Derived from proprietary unpublished source code, @@ -93,10 +93,10 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits) #define DRV_MODULE_NAME "tg3" #define TG3_MAJ_NUM 3 -#define TG3_MIN_NUM 128 +#define TG3_MIN_NUM 129 #define DRV_MODULE_VERSION \ __stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM) -#define DRV_MODULE_RELDATE "December 03, 2012" +#define DRV_MODULE_RELDATE "January 06, 2013" #define RESET_KIND_SHUTDOWN 0 #define RESET_KIND_INIT 1 diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 39afc0e..9cd88a4 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -4,7 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2007-2012 Broadcom Corporation. + * Copyright (C) 2007-2013 Broadcom Corporation. */ #ifndef _T3_H @@ -3348,9 +3348,7 @@ struct tg3 { const struct firmware *fw; u32 fw_len; /* includes BSS */ -#if IS_ENABLED(CONFIG_HWMON) struct device *hwmon_dev; -#endif bool link_up; }; -- cgit v0.10.2 From efc61a3442da9fd17a61fcabef445534598f54a8 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 6 Jan 2013 03:25:45 +0000 Subject: ethoc: fix mac address set Function ethoc_set_mac_address() was incorrectly using passed pointer as pointer to address, that is not correct. Struct sockaddr have to be be used here. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index b93062d..b51c81a 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -771,20 +771,24 @@ static int ethoc_config(struct net_device *dev, struct ifmap *map) return -ENOSYS; } -static int ethoc_set_mac_address(struct net_device *dev, void *addr) +static void ethoc_do_set_mac_address(struct net_device *dev) { struct ethoc *priv = netdev_priv(dev); - u8 *mac = (u8 *)addr; - - if (!is_valid_ether_addr(mac)) - return -EADDRNOTAVAIL; + unsigned char *mac = dev->dev_addr; ethoc_write(priv, MAC_ADDR0, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); ethoc_write(priv, MAC_ADDR1, (mac[0] << 8) | (mac[1] << 0)); +} - memcpy(dev->dev_addr, mac, ETH_ALEN); +static int ethoc_set_mac_address(struct net_device *dev, void *p) +{ + const struct sockaddr *addr = p; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + ethoc_do_set_mac_address(dev); return 0; } @@ -1060,11 +1064,7 @@ static int ethoc_probe(struct platform_device *pdev) random_mac = true; } - ret = ethoc_set_mac_address(netdev, netdev->dev_addr); - if (ret) { - dev_err(&netdev->dev, "failed to set MAC address\n"); - goto error; - } + ethoc_do_set_mac_address(netdev); if (random_mac) netdev->addr_assign_type = NET_ADDR_RANDOM; -- cgit v0.10.2 From 2afb9b533423a9b97f84181e773cf9361d98fed6 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 6 Jan 2013 12:41:57 +0000 Subject: ethtool: set addr_assign_type to NET_ADDR_SET when addr is passed on create In case user passed address via netlink during create, NET_ADDR_PERM was set. That is not correct so fix this by setting NET_ADDR_SET. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 9969afb..9a419b0 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1667,9 +1667,11 @@ struct net_device *rtnl_create_link(struct net *net, if (tb[IFLA_MTU]) dev->mtu = nla_get_u32(tb[IFLA_MTU]); - if (tb[IFLA_ADDRESS]) + if (tb[IFLA_ADDRESS]) { memcpy(dev->dev_addr, nla_data(tb[IFLA_ADDRESS]), nla_len(tb[IFLA_ADDRESS])); + dev->addr_assign_type = NET_ADDR_SET; + } if (tb[IFLA_BROADCAST]) memcpy(dev->broadcast, nla_data(tb[IFLA_BROADCAST]), nla_len(tb[IFLA_BROADCAST])); -- cgit v0.10.2 From 7826d43f2db45c9305a6e0ba165650e1a203f517 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 6 Jan 2013 00:44:26 +0000 Subject: ethtool: fix drvinfo strings set in drivers Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index fd9090d..d8926c3 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -274,8 +274,8 @@ static void uml_net_poll_controller(struct net_device *dev) static void uml_net_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRIVER_NAME); - strcpy(info->version, "42"); + strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, "42", sizeof(info->version)); } static const struct ethtool_ops uml_net_ethtool_ops = { diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 9542e16..177cf76 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -1317,11 +1317,13 @@ static void nes_netdev_get_drvinfo(struct net_device *netdev, struct nes_vnic *nesvnic = netdev_priv(netdev); struct nes_adapter *nesadapter = nesvnic->nesdev->nesadapter; - strcpy(drvinfo->driver, DRV_NAME); - strcpy(drvinfo->bus_info, pci_name(nesvnic->nesdev->pcidev)); - sprintf(drvinfo->fw_version, "%u.%u", nesadapter->firmware_version>>16, - nesadapter->firmware_version & 0x000000ff); - strcpy(drvinfo->version, DRV_VERSION); + strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->bus_info, pci_name(nesvnic->nesdev->pcidev), + sizeof(drvinfo->bus_info)); + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%u.%u", nesadapter->firmware_version >> 16, + nesadapter->firmware_version & 0x000000ff); + strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); drvinfo->testinfo_len = 0; drvinfo->eedump_len = 0; drvinfo->regdump_len = 0; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c index 29bc7b5..ca13133 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c @@ -39,7 +39,7 @@ static void ipoib_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1); + strlcpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver)); } static int ipoib_get_coalesce(struct net_device *dev, diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c495298..564cf42 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4330,11 +4330,12 @@ void bond_set_mode_ops(struct bonding *bond, int mode) } static void bond_ethtool_get_drvinfo(struct net_device *bond_dev, - struct ethtool_drvinfo *drvinfo) + struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, DRV_NAME, 32); - strncpy(drvinfo->version, DRV_VERSION, 32); - snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION); + strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d", + BOND_ABI_VERSION); } static const struct ethtool_ops bond_ethtool_ops = { diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 021d69c..29e272c 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1448,10 +1448,10 @@ static int e100_set_settings(struct net_device *dev, static void e100_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, "ETRAX 100LX", sizeof(info->driver) - 1); - strncpy(info->version, "$Revision: 1.31 $", sizeof(info->version) - 1); - strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1); - strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1); + strlcpy(info->driver, "ETRAX 100LX", sizeof(info->driver)); + strlcpy(info->version, "$Revision: 1.31 $", sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); } static int e100_nway_reset(struct net_device *dev) diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c index 2038eaa..9abd9a7 100644 --- a/drivers/net/ethernet/3com/3c501.c +++ b/drivers/net/ethernet/3com/3c501.c @@ -823,9 +823,10 @@ static void set_multicast_list(struct net_device *dev) static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", + dev->base_addr); } static u32 netdev_get_msglevel(struct net_device *dev) diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index 633c709..f36ff99 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1161,8 +1161,8 @@ el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); } static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c index 59e1e00..94c656f 100644 --- a/drivers/net/ethernet/3com/3c515.c +++ b/drivers/net/ethernet/3com/3c515.c @@ -1542,9 +1542,10 @@ static void set_rx_mode(struct net_device *dev) static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", + dev->base_addr); } static u32 netdev_get_msglevel(struct net_device *dev) diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c index 49d76bd..0e9afe7 100644 --- a/drivers/net/ethernet/8390/3c503.c +++ b/drivers/net/ethernet/8390/3c503.c @@ -695,9 +695,10 @@ el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", + dev->base_addr); } static const struct ethtool_ops netdev_ethtool_ops = { diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 70dba5d..7eeddf0 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -469,9 +469,9 @@ static void ax_get_drvinfo(struct net_device *dev, { struct platform_device *pdev = to_platform_device(dev->dev.parent); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pdev->name); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pdev->name, sizeof(info->bus_info)); } static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c index 8c3c9cf..c7a83f6 100644 --- a/drivers/net/ethernet/adi/bfin_mac.c +++ b/drivers/net/ethernet/adi/bfin_mac.c @@ -498,10 +498,10 @@ bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, KBUILD_MODNAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->fw_version, "N/A"); - strcpy(info->bus_info, dev_name(&dev->dev)); + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->bus_info, dev_name(&dev->dev), sizeof(info->bus_info)); } static void bfin_mac_ethtool_getwol(struct net_device *dev, diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c index aa53115..480662b 100644 --- a/drivers/net/ethernet/aeroflex/greth.c +++ b/drivers/net/ethernet/aeroflex/greth.c @@ -1127,10 +1127,11 @@ static void greth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *in { struct greth_private *greth = netdev_priv(dev); - strncpy(info->driver, dev_driver_string(greth->dev), 32); - strncpy(info->version, "revision: 1.0", 32); - strncpy(info->bus_info, greth->dev->bus->name, 32); - strncpy(info->fw_version, "N/A", 32); + strlcpy(info->driver, dev_driver_string(greth->dev), + sizeof(info->driver)); + strlcpy(info->version, "revision: 1.0", sizeof(info->version)); + strlcpy(info->bus_info, greth->dev->bus->name, sizeof(info->bus_info)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); info->eedump_len = 0; info->regdump_len = sizeof(struct greth_regs); } diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index 2ea221e..65b865a 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -587,10 +587,10 @@ au1000_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct au1000_private *aup = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "%s %d", DRV_NAME, aup->mac_id); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "%s %d", DRV_NAME, + aup->mac_id); info->regdump_len = 0; } diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c index c2d696c..6a40290 100644 --- a/drivers/net/ethernet/amd/sunlance.c +++ b/drivers/net/ethernet/amd/sunlance.c @@ -1284,8 +1284,8 @@ static void lance_free_hwresources(struct lance_private *lp) /* Ethtool support... */ static void sparc_lance_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "sunlance"); - strcpy(info->version, "2.02"); + strlcpy(info->driver, "sunlance", sizeof(info->driver)); + strlcpy(info->version, "2.02", sizeof(info->version)); } static const struct ethtool_ops sparc_lance_ethtool_ops = { diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index 39387d6..d8a1510 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -1227,10 +1227,11 @@ static const u32 unused_mib_regs[] = { static void bcm_enet_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, bcm_enet_driver_name, 32); - strncpy(drvinfo->version, bcm_enet_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); - strncpy(drvinfo->bus_info, "bcm63xx", 32); + strlcpy(drvinfo->driver, bcm_enet_driver_name, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, bcm_enet_driver_version, + sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, "bcm63xx", sizeof(drvinfo->bus_info)); drvinfo->n_stats = BCM_ENET_STATS_LEN; } diff --git a/drivers/net/ethernet/cirrus/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c index 78c5521..354cbb7 100644 --- a/drivers/net/ethernet/cirrus/ep93xx_eth.c +++ b/drivers/net/ethernet/cirrus/ep93xx_eth.c @@ -710,8 +710,8 @@ static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_MODULE_NAME); - strcpy(info->version, DRV_MODULE_VERSION); + strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); } static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index c73472c..8cdf025 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -434,9 +434,10 @@ static void dm9000_get_drvinfo(struct net_device *dev, { board_info_t *dm = to_dm9000_board(dev); - strcpy(info->driver, CARDNAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, to_platform_device(dm->dev)->name); + strlcpy(info->driver, CARDNAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, to_platform_device(dm->dev)->name, + sizeof(info->bus_info)); } static u32 dm9000_get_msglevel(struct net_device *dev) diff --git a/drivers/net/ethernet/dec/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c index 9f992b9..5015172 100644 --- a/drivers/net/ethernet/dec/ewrk3.c +++ b/drivers/net/ethernet/dec/ewrk3.c @@ -1506,10 +1506,10 @@ static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *in { int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->fw_version, "%d", fwrev); - strcpy(info->bus_info, "N/A"); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->fw_version, sizeof(info->fw_version), "%d", fwrev); + strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); info->eedump_len = EEPROM_MAX; } diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index 1d342d3..110d26f 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -1156,9 +1156,10 @@ set_multicast (struct net_device *dev) static void rio_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct netdev_private *np = netdev_priv(dev); - strcpy(info->driver, "dl2k"); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(np->pdev)); + + strlcpy(info->driver, "dl2k", sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info)); } static int rio_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c index 00454a1..76b302f 100644 --- a/drivers/net/ethernet/emulex/benet/be_ethtool.c +++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c @@ -183,12 +183,12 @@ static void be_get_drvinfo(struct net_device *netdev, strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); strlcpy(drvinfo->version, DRV_VER, sizeof(drvinfo->version)); - strncpy(drvinfo->fw_version, adapter->fw_ver, FW_VER_LEN); - if (memcmp(adapter->fw_ver, fw_on_flash, FW_VER_LEN) != 0) { - strcat(drvinfo->fw_version, " ["); - strcat(drvinfo->fw_version, fw_on_flash); - strcat(drvinfo->fw_version, "]"); - } + if (!memcmp(adapter->fw_ver, fw_on_flash, FW_VER_LEN)) + strlcpy(drvinfo->fw_version, adapter->fw_ver, + sizeof(drvinfo->fw_version)); + else + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%s [%s]", adapter->fw_ver, fw_on_flash); strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), sizeof(drvinfo->bus_info)); diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 74d749e..96454b5 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -955,9 +955,9 @@ static int ftgmac100_mdiobus_reset(struct mii_bus *bus) static void ftgmac100_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, dev_name(&netdev->dev)); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(&netdev->dev), sizeof(info->bus_info)); } static int ftgmac100_get_settings(struct net_device *netdev, diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c index b901a01..b5ea8fb 100644 --- a/drivers/net/ethernet/faraday/ftmac100.c +++ b/drivers/net/ethernet/faraday/ftmac100.c @@ -820,9 +820,9 @@ static void ftmac100_mdio_write(struct net_device *netdev, int phy_id, int reg, static void ftmac100_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, dev_name(&netdev->dev)); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(&netdev->dev), sizeof(info->bus_info)); } static int ftmac100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index a379319..0a9748b 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1168,9 +1168,10 @@ static void fec_enet_get_drvinfo(struct net_device *ndev, { struct fec_enet_private *fep = netdev_priv(ndev); - strcpy(info->driver, fep->pdev->dev.driver->name); - strcpy(info->version, "Revision: 1.0"); - strcpy(info->bus_info, dev_name(&ndev->dev)); + strlcpy(info->driver, fep->pdev->dev.driver->name, + sizeof(info->driver)); + strlcpy(info->version, "Revision: 1.0", sizeof(info->version)); + strlcpy(info->bus_info, dev_name(&ndev->dev), sizeof(info->bus_info)); } static const struct ethtool_ops fec_enet_ethtool_ops = { diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c index e9879c5..46df288 100644 --- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c +++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c @@ -888,8 +888,8 @@ static struct net_device_stats *fs_enet_get_stats(struct net_device *dev) static void fs_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_MODULE_NAME); - strcpy(info->version, DRV_MODULE_VERSION); + strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); } static int fs_get_regs_len(struct net_device *dev) diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 22eabc1..1b6a67c 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -649,8 +649,6 @@ struct gfar_extra_stats { /* Number of stats in the stats structure (ignore car and cam regs)*/ #define GFAR_STATS_LEN (GFAR_RMON_LEN + GFAR_EXTRA_STATS_LEN) -#define GFAR_INFOSTR_LEN 32 - struct gfar_stats { u64 extra[GFAR_EXTRA_STATS_LEN]; u64 rmon[GFAR_RMON_LEN]; diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index ab6762c..d0fe53c 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -184,10 +184,11 @@ static int gfar_sset_count(struct net_device *dev, int sset) static void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, DRV_NAME, GFAR_INFOSTR_LEN); - strncpy(drvinfo->version, gfar_driver_version, GFAR_INFOSTR_LEN); - strncpy(drvinfo->fw_version, "N/A", GFAR_INFOSTR_LEN); - strncpy(drvinfo->bus_info, "N/A", GFAR_INFOSTR_LEN); + strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, gfar_driver_version, + sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, "N/A", sizeof(drvinfo->bus_info)); drvinfo->regdump_len = 0; drvinfo->eedump_len = 0; } diff --git a/drivers/net/ethernet/freescale/ucc_geth_ethtool.c b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c index 37b0353..1ebf712 100644 --- a/drivers/net/ethernet/freescale/ucc_geth_ethtool.c +++ b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c @@ -350,10 +350,10 @@ static void uec_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, DRV_NAME, 32); - strncpy(drvinfo->version, DRV_VERSION, 32); - strncpy(drvinfo->fw_version, "N/A", 32); - strncpy(drvinfo->bus_info, "QUICC ENGINE", 32); + strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, "QUICC ENGINE", sizeof(drvinfo->bus_info)); drvinfo->eedump_len = 0; drvinfo->regdump_len = uec_get_regs_len(netdev); } diff --git a/drivers/net/ethernet/i825xx/3c505.c b/drivers/net/ethernet/i825xx/3c505.c index 6a5c21b..6d000d6 100644 --- a/drivers/net/ethernet/i825xx/3c505.c +++ b/drivers/net/ethernet/i825xx/3c505.c @@ -1138,9 +1138,10 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev) static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", + dev->base_addr); } static u32 netdev_get_msglevel(struct net_device *dev) diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c index e8984b05..13983ee 100644 --- a/drivers/net/ethernet/i825xx/3c507.c +++ b/drivers/net/ethernet/i825xx/3c507.c @@ -888,9 +888,10 @@ static void el16_rx(struct net_device *dev) static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", + dev->base_addr); } static u32 netdev_get_msglevel(struct net_device *dev) diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 256bdb8..4989481 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -2190,11 +2190,10 @@ static void emac_ethtool_get_drvinfo(struct net_device *ndev, { struct emac_instance *dev = netdev_priv(ndev); - strcpy(info->driver, "ibm_emac"); - strcpy(info->version, DRV_VERSION); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "PPC 4xx EMAC-%d %s", - dev->cell_index, dev->ofdev->dev.of_node->full_name); + strlcpy(info->driver, "ibm_emac", sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "PPC 4xx EMAC-%d %s", + dev->cell_index, dev->ofdev->dev.of_node->full_name); info->regdump_len = emac_ethtool_get_regs_len(ndev); } diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index f2fdbb7..4181f6e 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -722,9 +722,8 @@ static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, ibmveth_driver_name, sizeof(info->driver) - 1); - strncpy(info->version, ibmveth_driver_version, - sizeof(info->version) - 1); + strlcpy(info->driver, ibmveth_driver_name, sizeof(info->driver)); + strlcpy(info->version, ibmveth_driver_version, sizeof(info->version)); } static netdev_features_t ibmveth_fix_features(struct net_device *dev, diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index bc58f1d..5409fe8 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -695,9 +695,9 @@ static void netdev_get_drvinfo(struct net_device *dev, { struct korina_private *lp = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, lp->dev->name); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, lp->dev->name, sizeof(info->bus_info)); } static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index cd3d2c0..8ead46a 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -302,9 +302,9 @@ ltq_etop_hw_init(struct net_device *dev) static void ltq_etop_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "Lantiq ETOP"); - strcpy(info->bus_info, "internal"); - strcpy(info->version, DRV_VERSION); + strlcpy(info->driver, "Lantiq ETOP", sizeof(info->driver)); + strlcpy(info->bus_info, "internal", sizeof(info->bus_info)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); } static int diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index aa037ca..c7f2fa6 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1443,10 +1443,10 @@ static int pxa168_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) static void pxa168_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, DRIVER_NAME, 32); - strncpy(info->version, DRIVER_VERSION, 32); - strncpy(info->fw_version, "N/A", 32); - strncpy(info->bus_info, "N/A", 32); + strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); } static const struct ethtool_ops pxa168_ethtool_ops = { diff --git a/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c index 92dd72d..f8f0738 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c @@ -82,9 +82,9 @@ static void vxge_ethtool_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct vxgedev *vdev = netdev_priv(dev); - strlcpy(info->driver, VXGE_DRIVER_NAME, sizeof(VXGE_DRIVER_NAME)); - strlcpy(info->version, DRV_VERSION, sizeof(DRV_VERSION)); - strlcpy(info->fw_version, vdev->fw_version, VXGE_HW_FW_STRLEN); + strlcpy(info->driver, VXGE_DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, vdev->fw_version, sizeof(info->fw_version)); strlcpy(info->bus_info, pci_name(vdev->pdev), sizeof(info->bus_info)); info->regdump_len = sizeof(struct vxge_hw_vpath_reg) * vdev->no_of_vpath; diff --git a/drivers/net/ethernet/nuvoton/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c index cbd6a52..162da89 100644 --- a/drivers/net/ethernet/nuvoton/w90p910_ether.c +++ b/drivers/net/ethernet/nuvoton/w90p910_ether.c @@ -878,8 +878,8 @@ static int w90p910_ether_ioctl(struct net_device *dev, static void w90p910_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_MODULE_NAME); - strcpy(info->version, DRV_MODULE_VERSION); + strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); } static int w90p910_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 3466ca1..6fda51e 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1239,9 +1239,10 @@ static int lpc_eth_open(struct net_device *ndev) static void lpc_eth_ethtool_getdrvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) { - strcpy(info->driver, MODNAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, dev_name(ndev->dev.parent)); + strlcpy(info->driver, MODNAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(ndev->dev.parent), + sizeof(info->bus_info)); } static u32 lpc_eth_ethtool_getmsglevel(struct net_device *ndev) diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index b4a842c..921729f 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -1350,10 +1350,10 @@ static void octeon_mgmt_poll_controller(struct net_device *netdev) static void octeon_mgmt_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { - strncpy(info->driver, DRV_NAME, sizeof(info->driver)); - strncpy(info->version, DRV_VERSION, sizeof(info->version)); - strncpy(info->fw_version, "N/A", sizeof(info->fw_version)); - strncpy(info->bus_info, "N/A", sizeof(info->bus_info)); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); info->n_stats = 0; info->testinfo_len = 0; info->regdump_len = 0; diff --git a/drivers/net/ethernet/packetengines/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c index bf829ee..cac33e5 100644 --- a/drivers/net/ethernet/packetengines/hamachi.c +++ b/drivers/net/ethernet/packetengines/hamachi.c @@ -1808,9 +1808,10 @@ static int check_if_running(struct net_device *dev) static void hamachi_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct hamachi_private *np = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(np->pci_dev)); + + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); } static int hamachi_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) diff --git a/drivers/net/ethernet/packetengines/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c index fbaed4f..d28593b 100644 --- a/drivers/net/ethernet/packetengines/yellowfin.c +++ b/drivers/net/ethernet/packetengines/yellowfin.c @@ -1326,9 +1326,10 @@ static void set_rx_mode(struct net_device *dev) static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct yellowfin_private *np = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(np->pci_dev)); + + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); } static const struct ethtool_ops ethtool_ops = { diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index 63c1312..ba0be4b 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -957,9 +957,9 @@ static void netdev_get_drvinfo(struct net_device *dev, { struct r6040_private *rp = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(rp->pdev)); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(rp->pdev), sizeof(info->bus_info)); } static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c index dc171b4..7ed08c3 100644 --- a/drivers/net/ethernet/sgi/ioc3-eth.c +++ b/drivers/net/ethernet/sgi/ioc3-eth.c @@ -1565,9 +1565,9 @@ static void ioc3_get_drvinfo (struct net_device *dev, { struct ioc3_private *ip = netdev_priv(dev); - strcpy (info->driver, IOC3_NAME); - strcpy (info->version, IOC3_VERSION); - strcpy (info->bus_info, pci_name(ip->pdev)); + strlcpy(info->driver, IOC3_NAME, sizeof(info->driver)); + strlcpy(info->version, IOC3_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(ip->pdev), sizeof(info->bus_info)); } static int ioc3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c index 59a6f88..1538d54 100644 --- a/drivers/net/ethernet/smsc/smc911x.c +++ b/drivers/net/ethernet/smsc/smc911x.c @@ -1522,9 +1522,10 @@ smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) static void smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, CARDNAME, sizeof(info->driver)); - strncpy(info->version, version, sizeof(info->version)); - strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info)); + strlcpy(info->driver, CARDNAME, sizeof(info->driver)); + strlcpy(info->version, version, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(dev->dev.parent), + sizeof(info->bus_info)); } static int smc911x_ethtool_nwayreset(struct net_device *dev) diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index a670d23..591650a 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -1597,9 +1597,10 @@ smc_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) static void smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, CARDNAME, sizeof(info->driver)); - strncpy(info->version, version, sizeof(info->version)); - strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info)); + strlcpy(info->driver, CARDNAME, sizeof(info->driver)); + strlcpy(info->version, version, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(dev->dev.parent), + sizeof(info->bus_info)); } static int smc_ethtool_nwayreset(struct net_device *dev) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index 1372ce2..d1ac39c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -210,8 +210,7 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev, strlcpy(info->driver, MAC100_ETHTOOL_NAME, sizeof(info->driver)); - strcpy(info->version, DRV_MODULE_VERSION); - info->fw_version[0] = '\0'; + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); } static int stmmac_ethtool_getsettings(struct net_device *dev, diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index be82f6d..5fafca0 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -1042,8 +1042,8 @@ static void bigmac_set_multicast(struct net_device *dev) /* Ethtool support... */ static void bigmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "sunbmac"); - strcpy(info->version, "2.0"); + strlcpy(info->driver, "sunbmac", sizeof(info->driver)); + strlcpy(info->version, "2.0", sizeof(info->version)); } static u32 bigmac_get_link(struct net_device *dev) diff --git a/drivers/net/ethernet/sun/sunqe.c b/drivers/net/ethernet/sun/sunqe.c index 1dcee69..49bf3e2 100644 --- a/drivers/net/ethernet/sun/sunqe.c +++ b/drivers/net/ethernet/sun/sunqe.c @@ -685,13 +685,14 @@ static void qe_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) struct sunqe *qep = netdev_priv(dev); struct platform_device *op; - strcpy(info->driver, "sunqe"); - strcpy(info->version, "3.0"); + strlcpy(info->driver, "sunqe", sizeof(info->driver)); + strlcpy(info->version, "3.0", sizeof(info->version)); op = qep->op; regs = of_get_property(op->dev.of_node, "reg", NULL); if (regs) - sprintf(info->bus_info, "SBUS:%d", regs->which_io); + snprintf(info->bus_info, sizeof(info->bus_info), "SBUS:%d", + regs->which_io); } diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index e1b8955..1cf767e 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -882,8 +882,8 @@ static int vnet_set_mac_addr(struct net_device *dev, void *p) static void vnet_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_MODULE_NAME); - strcpy(info->version, DRV_MODULE_VERSION); + strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); } static u32 vnet_get_msglevel(struct net_device *dev) diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 1e4d743..e15cc71 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -2179,10 +2179,10 @@ bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct bdx_priv *priv = netdev_priv(netdev); - strlcat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver)); - strlcat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version)); - strlcat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); - strlcat(drvinfo->bus_info, pci_name(priv->pdev), + strlcpy(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(priv->pdev), sizeof(drvinfo->bus_info)); drvinfo->n_stats = ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names) : 0); diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c index d9625f6..70d1920 100644 --- a/drivers/net/ethernet/ti/cpmac.c +++ b/drivers/net/ethernet/ti/cpmac.c @@ -904,10 +904,9 @@ static int cpmac_set_ringparam(struct net_device *dev, static void cpmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "cpmac"); - strcpy(info->version, CPMAC_VERSION); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "%s", "cpmac"); + strlcpy(info->driver, "cpmac", sizeof(info->driver)); + strlcpy(info->version, CPMAC_VERSION, sizeof(info->version)); + snprintf(info->bus_info, sizeof(info->bus_info), "%s", "cpmac"); info->regdump_len = 0; } diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 40aff68..bea736b 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -944,9 +944,10 @@ static void cpsw_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) { struct cpsw_priv *priv = netdev_priv(ndev); - strcpy(info->driver, "TI CPSW Driver v1.0"); - strcpy(info->version, "1.0"); - strcpy(info->bus_info, priv->pdev->name); + + strlcpy(info->driver, "TI CPSW Driver v1.0", sizeof(info->driver)); + strlcpy(info->version, "1.0", sizeof(info->version)); + strlcpy(info->bus_info, priv->pdev->name, sizeof(info->bus_info)); } static u32 cpsw_get_msglevel(struct net_device *ndev) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 6841a22..6621ae3 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -480,8 +480,8 @@ static void emac_dump_regs(struct emac_priv *priv) static void emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) { - strcpy(info->driver, emac_version_string); - strcpy(info->version, EMAC_MODULE_VERSION); + strlcpy(info->driver, emac_version_string, sizeof(info->driver)); + strlcpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version)); } /** diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c index e321d0b..445c059 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c @@ -1226,8 +1226,8 @@ int gelic_net_open(struct net_device *netdev) void gelic_net_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { - strncpy(info->driver, DRV_NAME, sizeof(info->driver) - 1); - strncpy(info->version, DRV_VERSION, sizeof(info->version) - 1); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); } static int gelic_ether_get_settings(struct net_device *netdev, diff --git a/drivers/net/ethernet/toshiba/spider_net_ethtool.c b/drivers/net/ethernet/toshiba/spider_net_ethtool.c index 9c288cd..ffe5193 100644 --- a/drivers/net/ethernet/toshiba/spider_net_ethtool.c +++ b/drivers/net/ethernet/toshiba/spider_net_ethtool.c @@ -72,11 +72,13 @@ spider_net_ethtool_get_drvinfo(struct net_device *netdev, card = netdev_priv(netdev); /* clear and fill out info */ - memset(drvinfo, 0, sizeof(struct ethtool_drvinfo)); - strncpy(drvinfo->driver, spider_net_driver_name, 32); - strncpy(drvinfo->version, VERSION, 32); - strcpy(drvinfo->fw_version, "no information"); - strncpy(drvinfo->bus_info, pci_name(card->pdev), 32); + strlcpy(drvinfo->driver, spider_net_driver_name, + sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, VERSION, sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "no information", + sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(card->pdev), + sizeof(drvinfo->bus_info)); } static void diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c index 9819349..23a789e 100644 --- a/drivers/net/ethernet/toshiba/tc35815.c +++ b/drivers/net/ethernet/toshiba/tc35815.c @@ -1976,9 +1976,10 @@ tc35815_set_multicast_list(struct net_device *dev) static void tc35815_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct tc35815_local *lp = netdev_priv(dev); - strcpy(info->driver, MODNAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(lp->pci_dev)); + + strlcpy(info->driver, MODNAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(lp->pci_dev), sizeof(info->bus_info)); } static int tc35815_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index d9f69b8..d3b3571 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1124,9 +1124,8 @@ static int axienet_ethtools_set_settings(struct net_device *ndev, static void axienet_ethtools_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *ed) { - memset(ed, 0, sizeof(struct ethtool_drvinfo)); - strcpy(ed->driver, DRIVER_NAME); - strcpy(ed->version, DRIVER_VERSION); + strlcpy(ed->driver, DRIVER_NAME, sizeof(ed->driver)); + strlcpy(ed->version, DRIVER_VERSION, sizeof(ed->version)); ed->regdump_len = sizeof(u32) * AXIENET_REGS_N; } diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index 94a1f94..98e09d0 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -1412,7 +1412,8 @@ static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { strlcpy(info->driver, "xirc2ps_cs", sizeof(info->driver)); - sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr); + snprintf(info->bus_info, sizeof(info->bus_info), "PCMCIA 0x%lx", + dev->base_addr); } static const struct ethtool_ops netdev_ethtool_ops = { diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index d3ebb73..a4be1ad 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -977,11 +977,12 @@ static void ixp4xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct port *port = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); + + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); snprintf(info->fw_version, sizeof(info->fw_version), "%u:%u:%u:%u", port->firmware[0], port->firmware[1], port->firmware[2], port->firmware[3]); - strcpy(info->bus_info, "internal"); + strlcpy(info->bus_info, "internal", sizeof(info->bus_info)); } static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index f825a62..a9975c7 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -304,9 +304,9 @@ int netvsc_recv_callback(struct hv_device *device_obj, static void netvsc_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { - strcpy(info->driver, KBUILD_MODNAME); - strcpy(info->version, HV_DRV_VERSION); - strcpy(info->fw_version, "N/A"); + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->version, HV_DRV_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); } static int netvsc_change_mtu(struct net_device *ndev, int mtu) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 0ae4518..1047e58 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -585,8 +585,8 @@ static int macvlan_fdb_del(struct ndmsg *ndm, static void macvlan_ethtool_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) { - snprintf(drvinfo->driver, 32, "macvlan"); - snprintf(drvinfo->version, 32, "0.1"); + strlcpy(drvinfo->driver, "macvlan", sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, "0.1", sizeof(drvinfo->version)); } static int macvlan_ethtool_get_settings(struct net_device *dev, diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index d8b9b1e..f433b59 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -410,10 +410,10 @@ static void rionet_get_drvinfo(struct net_device *ndev, { struct rionet_private *rnet = netdev_priv(ndev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->fw_version, "n/a"); - strcpy(info->bus_info, rnet->mport->name); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "n/a", sizeof(info->fw_version)); + strlcpy(info->bus_info, rnet->mport->name, sizeof(info->bus_info)); } static u32 rionet_get_msglevel(struct net_device *ndev) diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 50d1673..19bc23f 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -510,8 +510,8 @@ void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { /* Inherit standard device info */ usbnet_get_drvinfo(net, info); - strncpy (info->driver, DRIVER_NAME, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); + strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); info->eedump_len = AX_EEPROM_LEN; } diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 18d9579..8d5cac2 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -685,9 +685,9 @@ static void catc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct catc *catc = netdev_priv(dev); - strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN); - strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); - usb_make_path (catc->usbdev, info->bus_info, sizeof info->bus_info); + strlcpy(info->driver, driver_name, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); + usb_make_path(catc->usbdev, info->bus_info, sizeof(info->bus_info)); } static int catc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 71b6e92..016aa6f 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -65,9 +65,9 @@ cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - strncpy(info->driver, dev->driver_name, sizeof(info->driver)); - strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); - strncpy(info->fw_version, dev->driver_info->description, + strlcpy(info->driver, dev->driver_name, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, dev->driver_info->description, sizeof(info->fw_version)); usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info)); } diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index a0b5807..3c02f95 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1074,8 +1074,9 @@ static void pegasus_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { pegasus_t *pegasus = netdev_priv(dev); - strncpy(info->driver, driver_name, sizeof(info->driver) - 1); - strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); + + strlcpy(info->driver, driver_name, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); usb_make_path(pegasus->usb, info->bus_info, sizeof(info->bus_info)); } diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 5f39a3b..a491d3a 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -776,9 +776,9 @@ static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinf { rtl8150_t *dev = netdev_priv(netdev); - strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN); - strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); - usb_make_path(dev->udev, info->bus_info, sizeof info->bus_info); + strlcpy(info->driver, driver_name, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); + usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info)); } static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index 18dd425..453aa6c 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -598,8 +598,8 @@ static void sierra_net_get_drvinfo(struct net_device *net, { /* Inherit standard device info */ usbnet_get_drvinfo(net, info); - strncpy(info->driver, driver_name, sizeof info->driver); - strncpy(info->version, DRIVER_VERSION, sizeof info->version); + strlcpy(info->driver, driver_name, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); } static u32 sierra_net_get_link(struct net_device *net) diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c index 587a218..8c9fa4b 100644 --- a/drivers/net/vmxnet3/vmxnet3_ethtool.c +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -207,7 +207,7 @@ vmxnet3_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) sizeof(drvinfo->version)); strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), - ETHTOOL_BUSINFO_LEN); + sizeof(drvinfo->bus_info)); drvinfo->n_stats = vmxnet3_get_sset_count(netdev, ETH_SS_STATS); drvinfo->testinfo_len = 0; drvinfo->eedump_len = 0; diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c index 1d76ae8..cedd4d3 100644 --- a/drivers/net/wimax/i2400m/netdev.c +++ b/drivers/net/wimax/i2400m/netdev.c @@ -596,12 +596,12 @@ static void i2400m_get_drvinfo(struct net_device *net_dev, { struct i2400m *i2400m = net_dev_to_i2400m(net_dev); - strncpy(info->driver, KBUILD_MODNAME, sizeof(info->driver) - 1); - strncpy(info->fw_version, - i2400m->fw_name ? : "", sizeof(info->fw_version) - 1); + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->fw_version, i2400m->fw_name ? : "", + sizeof(info->fw_version)); if (net_dev->dev.parent) - strncpy(info->bus_info, dev_name(net_dev->dev.parent), - sizeof(info->bus_info) - 1); + strlcpy(info->bus_info, dev_name(net_dev->dev.parent), + sizeof(info->bus_info)); } static const struct ethtool_ops i2400m_ethtool_ops = { diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 080f363..cd15a93 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -346,9 +346,9 @@ static void i2400mu_get_drvinfo(struct net_device *net_dev, struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); struct usb_device *udev = i2400mu->usb_dev; - strncpy(info->driver, KBUILD_MODNAME, sizeof(info->driver) - 1); - strncpy(info->fw_version, - i2400m->fw_name ? : "", sizeof(info->fw_version) - 1); + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->fw_version, i2400m->fw_name ? : "", + sizeof(info->fw_version)); usb_make_path(udev, info->bus_info, sizeof(info->bus_info)); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 74a616b..8c28a15 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -395,9 +395,11 @@ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev, struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; - sprintf(info->driver, KBUILD_MODNAME); - sprintf(info->version, "%lu", drvr->drv_version); - sprintf(info->bus_info, "%s", dev_name(drvr->bus_if->dev)); + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + snprintf(info->version, sizeof(info->version), "%lu", + drvr->drv_version); + strlcpy(info->bus_info, dev_name(drvr->bus_if->dev), + sizeof(info->bus_info)); } static const struct ethtool_ops brcmf_ethtool_ops = { diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 638a57f..029a7ac 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5444,17 +5444,14 @@ void qeth_core_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct qeth_card *card = dev->ml_priv; - if (card->options.layer2) - strcpy(info->driver, "qeth_l2"); - else - strcpy(info->driver, "qeth_l3"); - - strcpy(info->version, "1.0"); - strcpy(info->fw_version, card->info.mcl_level); - sprintf(info->bus_info, "%s/%s/%s", - CARD_RDEV_ID(card), - CARD_WDEV_ID(card), - CARD_DDEV_ID(card)); + + strlcpy(info->driver, card->options.layer2 ? "qeth_l2" : "qeth_l3", + sizeof(info->driver)); + strlcpy(info->version, "1.0", sizeof(info->version)); + strlcpy(info->fw_version, card->info.mcl_level, + sizeof(info->fw_version)); + snprintf(info->bus_info, sizeof(info->bus_info), "%s/%s/%s", + CARD_RDEV_ID(card), CARD_WDEV_ID(card), CARD_DDEV_ID(card)); } EXPORT_SYMBOL_GPL(qeth_core_get_drvinfo); diff --git a/drivers/staging/bcm/Bcmnet.c b/drivers/staging/bcm/Bcmnet.c index a3b91c7..4e470d4 100644 --- a/drivers/staging/bcm/Bcmnet.c +++ b/drivers/staging/bcm/Bcmnet.c @@ -145,8 +145,8 @@ static void bcm_get_drvinfo(struct net_device *dev, struct bcm_interface_adapter *psIntfAdapter = Adapter->pvInterfaceAdapter; struct usb_device *udev = interface_to_usbdev(psIntfAdapter->interface); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); snprintf(info->fw_version, sizeof(info->fw_version), "%u.%u", Adapter->uiFlashLayoutMajorVersion, Adapter->uiFlashLayoutMinorVersion); diff --git a/drivers/staging/ccg/u_ether.c b/drivers/staging/ccg/u_ether.c index d0dabcf..fed7886 100644 --- a/drivers/staging/ccg/u_ether.c +++ b/drivers/staging/ccg/u_ether.c @@ -157,12 +157,12 @@ static int ueth_change_mtu(struct net_device *net, int new_mtu) static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) { - struct eth_dev *dev = netdev_priv(net); + struct eth_dev *dev = netdev_priv(net); - strlcpy(p->driver, "g_ether", sizeof p->driver); - strlcpy(p->version, UETH__VERSION, sizeof p->version); - strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version); - strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); + strlcpy(p->driver, "g_ether", sizeof(p->driver)); + strlcpy(p->version, UETH__VERSION, sizeof(p->version)); + strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); + strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); } /* REVISIT can also support: diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 84bbcd4..f15059c 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -3560,15 +3560,15 @@ static void et131x_get_regs(struct net_device *netdev, regs_buff[num++] = readl(&aregs->rxdma.fbr1_min_des); } -#define ET131X_DRVINFO_LEN 32 /* value from ethtool.h */ static void et131x_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { struct et131x_adapter *adapter = netdev_priv(netdev); - strncpy(info->driver, DRIVER_NAME, ET131X_DRVINFO_LEN); - strncpy(info->version, DRIVER_VERSION, ET131X_DRVINFO_LEN); - strncpy(info->bus_info, pci_name(adapter->pdev), ET131X_DRVINFO_LEN); + strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(adapter->pdev), + sizeof(info->bus_info)); } static struct ethtool_ops et131x_ethtool_ops = { diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c index 86a680c..67ca5c9 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c @@ -2077,11 +2077,12 @@ static void ft1000_get_drvinfo(struct net_device *dev, struct ft1000_info *ft_info; ft_info = netdev_priv(dev); - snprintf(info->driver, 32, "ft1000"); - snprintf(info->bus_info, ETHTOOL_BUSINFO_LEN, "PCMCIA 0x%lx", + strlcpy(info->driver, "ft1000", sizeof(info->driver)); + snprintf(info->bus_info, sizeof(info->bus_info), "PCMCIA 0x%lx", dev->base_addr); - snprintf(info->fw_version, 32, "%d.%d.%d.%d", ft_info->DspVer[0], - ft_info->DspVer[1], ft_info->DspVer[2], ft_info->DspVer[3]); + snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d.%d", + ft_info->DspVer[0], ft_info->DspVer[1], ft_info->DspVer[2], + ft_info->DspVer[3]); } static u32 ft1000_get_link(struct net_device *dev) diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index f15b31b..83b1030 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -46,9 +46,9 @@ static void cvm_oct_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "cavium-ethernet"); - strcpy(info->version, OCTEON_ETHERNET_VERSION); - strcpy(info->bus_info, "Builtin"); + strlcpy(info->driver, "cavium-ethernet", sizeof(info->driver)); + strlcpy(info->version, OCTEON_ETHERNET_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info)); } static int cvm_oct_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c b/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c index 36452fb..0cfb3ec 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c @@ -34,9 +34,9 @@ static void rtl819x_ethtool_get_drvinfo(struct net_device *dev, { struct r8192_priv *priv = rtllib_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(priv->pdev)); + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(priv->pdev), sizeof(info->bus_info)); } static u32 rtl819x_ethtool_get_link(struct net_device *dev) diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c index fb42140..235cc2a 100644 --- a/drivers/staging/wlags49_h2/wl_netdev.c +++ b/drivers/staging/wlags49_h2/wl_netdev.c @@ -457,17 +457,17 @@ int wl_close( struct net_device *dev ) static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); - strncpy(info->version, DRV_VERSION_STR, sizeof(info->version) - 1); -// strncpy(info.fw_version, priv->fw_name, -// sizeof(info.fw_version) - 1); + strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION_STR, sizeof(info->version)); +// strlcpy(info.fw_version, priv->fw_name, +// sizeof(info.fw_version)); if (dev->dev.parent) { dev_set_name(dev->dev.parent, "%s", info->bus_info); - //strncpy(info->bus_info, dev->dev.parent->bus_id, - // sizeof(info->bus_info) - 1); + //strlcpy(info->bus_info, dev->dev.parent->bus_id, + // sizeof(info->bus_info)); } else { - snprintf(info->bus_info, sizeof(info->bus_info) - 1, + snprintf(info->bus_info, sizeof(info->bus_info), "PCMCIA FIXME"); // "PCMCIA 0x%lx", priv->hw.iobase); } diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 4ec3c0d..a0aa721 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -159,12 +159,12 @@ static int ueth_change_mtu(struct net_device *net, int new_mtu) static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) { - struct eth_dev *dev = netdev_priv(net); + struct eth_dev *dev = netdev_priv(net); - strlcpy(p->driver, "g_ether", sizeof p->driver); - strlcpy(p->version, UETH__VERSION, sizeof p->version); - strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version); - strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); + strlcpy(p->driver, "g_ether", sizeof(p->driver)); + strlcpy(p->version, UETH__VERSION, sizeof(p->version)); + strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); + strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); } /* REVISIT can also support: diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 4a6d31a..09f9108 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -640,9 +640,9 @@ static int vlan_ethtool_get_settings(struct net_device *dev, static void vlan_ethtool_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, vlan_fullname); - strcpy(info->version, vlan_version); - strcpy(info->fw_version, "N/A"); + strlcpy(info->driver, vlan_fullname, sizeof(info->driver)); + strlcpy(info->version, vlan_version, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); } static struct rtnl_link_stats64 *vlan_dev_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index fa388b2..90f4049 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -580,10 +580,10 @@ static int batadv_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) static void batadv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "B.A.T.M.A.N. advanced"); - strcpy(info->version, BATADV_SOURCE_VERSION); - strcpy(info->fw_version, "N/A"); - strcpy(info->bus_info, "batman"); + strlcpy(info->driver, "B.A.T.M.A.N. advanced", sizeof(info->driver)); + strlcpy(info->version, BATADV_SOURCE_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->bus_info, "batman", sizeof(info->bus_info)); } static u32 batadv_get_msglevel(struct net_device *dev) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 38974f7..e1bc090 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -184,10 +184,10 @@ static int br_set_mac_address(struct net_device *dev, void *p) static void br_getinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "bridge"); - strcpy(info->version, BR_VERSION); - strcpy(info->fw_version, "N/A"); - strcpy(info->bus_info, "N/A"); + strlcpy(info->driver, "bridge", sizeof(info->driver)); + strlcpy(info->version, BR_VERSION, sizeof(info->version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); } static netdev_features_t br_fix_features(struct net_device *dev, diff --git a/net/dsa/slave.c b/net/dsa/slave.c index e32083d..f795b0c 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -203,10 +203,10 @@ dsa_slave_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) static void dsa_slave_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, "dsa", 32); - strncpy(drvinfo->version, dsa_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); - strncpy(drvinfo->bus_info, "platform", 32); + strlcpy(drvinfo->driver, "dsa", sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, dsa_driver_version, sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, "platform", sizeof(drvinfo->bus_info)); } static int dsa_slave_nway_reset(struct net_device *dev) diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c index 44cd5c3..0531de6 100644 --- a/net/openvswitch/vport-internal_dev.c +++ b/net/openvswitch/vport-internal_dev.c @@ -97,7 +97,7 @@ static int internal_dev_stop(struct net_device *netdev) static void internal_dev_getinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { - strcpy(info->driver, "openvswitch"); + strlcpy(info->driver, "openvswitch", sizeof(info->driver)); } static const struct ethtool_ops internal_dev_ethtool_ops = { diff --git a/net/wireless/ethtool.c b/net/wireless/ethtool.c index 48c48ff..e37862f 100644 --- a/net/wireless/ethtool.c +++ b/net/wireless/ethtool.c @@ -15,10 +15,10 @@ static void cfg80211_get_drvinfo(struct net_device *dev, strlcpy(info->version, init_utsname()->release, sizeof(info->version)); if (wdev->wiphy->fw_version[0]) - strncpy(info->fw_version, wdev->wiphy->fw_version, + strlcpy(info->fw_version, wdev->wiphy->fw_version, sizeof(info->fw_version)); else - strncpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); strlcpy(info->bus_info, dev_name(wiphy_dev(wdev->wiphy)), sizeof(info->bus_info)); -- cgit v0.10.2 From 81135548e697a24ab41944c4354953a71b0b9efe Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 6 Jan 2013 02:12:51 +0000 Subject: net: use ETHTOOL_FWVERS_LEN instead of ETHTOOL_BUSINFO_LEN for fw_ver strings Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 05d5ba6..b2f85cb 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -783,7 +783,7 @@ static int ath9k_init_firmware_version(struct ath9k_htc_priv *priv) priv->fw_version_major = be16_to_cpu(cmd_rsp.major); priv->fw_version_minor = be16_to_cpu(cmd_rsp.minor); - snprintf(hw->wiphy->fw_version, ETHTOOL_BUSINFO_LEN, "%d.%d", + snprintf(hw->wiphy->fw_version, sizeof(hw->wiphy->fw_version), "%d.%d", priv->fw_version_major, priv->fw_version_minor); diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index d1a86b6..715291e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -157,7 +157,7 @@ struct fw_img { struct iwl_fw { u32 ucode_ver; - char fw_version[ETHTOOL_BUSINFO_LEN]; + char fw_version[ETHTOOL_FWVERS_LEN]; /* ucode images */ struct fw_img img[IWL_UCODE_TYPE_MAX]; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 6678d4b..5ce26cf 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -122,9 +122,9 @@ enum { struct wl1271_chip { u32 id; - char fw_ver_str[ETHTOOL_BUSINFO_LEN]; + char fw_ver_str[ETHTOOL_FWVERS_LEN]; unsigned int fw_ver[NUM_FW_VER]; - char phy_fw_ver_str[ETHTOOL_BUSINFO_LEN]; + char phy_fw_ver_str[ETHTOOL_FWVERS_LEN]; }; #define NUM_TX_QUEUES 4 diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8e6a6b7..f78fa19 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2333,7 +2333,7 @@ struct wiphy { u32 rts_threshold; u8 coverage_class; - char fw_version[ETHTOOL_BUSINFO_LEN]; + char fw_version[ETHTOOL_FWVERS_LEN]; u32 hw_version; #ifdef CONFIG_PM -- cgit v0.10.2 From 9ca1b22d6d228177e6f929f6818a1cd3d5e30c4a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 5 Jan 2013 21:31:18 +0000 Subject: net: splice: avoid high order page splitting splice() can handle pages of any order, but network code tries hard to split them in PAGE_SIZE units. Not quite successfully anyway, as __splice_segment() assumed poff < PAGE_SIZE. This is true for the skb->data part, not necessarily for the fragments. This patch removes this logic to give the pages as they are in the skb. Signed-off-by: Eric Dumazet Cc: Willy Tarreau Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index bc96100..b03fc0c 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1707,20 +1707,6 @@ static bool spd_fill_page(struct splice_pipe_desc *spd, return false; } -static inline void __segment_seek(struct page **page, unsigned int *poff, - unsigned int *plen, unsigned int off) -{ - unsigned long n; - - *poff += off; - n = *poff / PAGE_SIZE; - if (n) - *page = nth_page(*page, n); - - *poff = *poff % PAGE_SIZE; - *plen -= off; -} - static bool __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, @@ -1728,6 +1714,8 @@ static bool __splice_segment(struct page *page, unsigned int poff, struct sock *sk, struct pipe_inode_info *pipe) { + unsigned int flen; + if (!*len) return true; @@ -1738,24 +1726,16 @@ static bool __splice_segment(struct page *page, unsigned int poff, } /* ignore any bits we already processed */ - if (*off) { - __segment_seek(&page, &poff, &plen, *off); - *off = 0; - } - - do { - unsigned int flen = min(*len, plen); + poff += *off; + plen -= *off; + *off = 0; - /* the linear region may spread across several pages */ - flen = min_t(unsigned int, flen, PAGE_SIZE - poff); + flen = min(*len, plen); - if (spd_fill_page(spd, pipe, page, &flen, poff, skb, linear, sk)) - return true; - - __segment_seek(&page, &poff, &plen, flen); - *len -= flen; + if (spd_fill_page(spd, pipe, page, &flen, poff, skb, linear, sk)) + return true; - } while (*len && plen); + *len -= flen; return false; } -- cgit v0.10.2 From 71bcdba06db91ceaaffe019b6c958b5faf06012a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sat, 5 Jan 2013 16:34:51 +0000 Subject: ndisc: Use struct rd_msg for redirect message. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 4c4ccf7..5733cd2 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1355,12 +1355,11 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) struct net_device *dev = skb->dev; struct net *net = dev_net(dev); struct sock *sk = net->ipv6.ndisc_sk; - int len = sizeof(struct icmp6hdr) + 2 * sizeof(struct in6_addr); + int len = sizeof(struct rd_msg); struct inet_peer *peer; struct sk_buff *buff; - struct icmp6hdr *icmph; + struct rd_msg *msg; struct in6_addr saddr_buf; - struct in6_addr *addrp; struct rt6_info *rt; struct dst_entry *dst; struct inet6_dev *idev; @@ -1455,21 +1454,19 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) skb_set_transport_header(buff, skb_tail_pointer(buff) - buff->data); skb_put(buff, len); - icmph = icmp6_hdr(buff); + msg = (struct rd_msg *)icmp6_hdr(buff); - memset(icmph, 0, sizeof(struct icmp6hdr)); - icmph->icmp6_type = NDISC_REDIRECT; + memset(&msg->icmph, 0, sizeof(struct icmp6hdr)); + msg->icmph.icmp6_type = NDISC_REDIRECT; /* * copy target and destination addresses */ - addrp = (struct in6_addr *)(icmph + 1); - *addrp = *target; - addrp++; - *addrp = ipv6_hdr(skb)->daddr; + msg->target = *target; + msg->dest = ipv6_hdr(skb)->daddr; - opt = (u8*) (addrp + 1); + opt = msg->opt; /* * include target_address option @@ -1490,9 +1487,9 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) memcpy(opt, ipv6_hdr(skb), rd_len - 8); - icmph->icmp6_cksum = csum_ipv6_magic(&saddr_buf, &ipv6_hdr(skb)->saddr, - len, IPPROTO_ICMPV6, - csum_partial(icmph, len, 0)); + msg->icmph.icmp6_cksum = csum_ipv6_magic(&saddr_buf, &ipv6_hdr(skb)->saddr, + len, IPPROTO_ICMPV6, + csum_partial(msg, len, 0)); skb_dst_set(buff, dst); rcu_read_lock(); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index e229a3b..621b68e 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1705,37 +1705,33 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu struct net *net = dev_net(skb->dev); struct netevent_redirect netevent; struct rt6_info *rt, *nrt = NULL; - const struct in6_addr *target; struct ndisc_options ndopts; - const struct in6_addr *dest; struct neighbour *old_neigh; struct inet6_dev *in6_dev; struct neighbour *neigh; - struct icmp6hdr *icmph; + struct rd_msg *msg; int optlen, on_link; u8 *lladdr; optlen = skb->tail - skb->transport_header; - optlen -= sizeof(struct icmp6hdr) + 2 * sizeof(struct in6_addr); + optlen -= sizeof(*msg); if (optlen < 0) { net_dbg_ratelimited("rt6_do_redirect: packet too short\n"); return; } - icmph = icmp6_hdr(skb); - target = (const struct in6_addr *) (icmph + 1); - dest = target + 1; + msg = (struct rd_msg *)icmp6_hdr(skb); - if (ipv6_addr_is_multicast(dest)) { + if (ipv6_addr_is_multicast(&msg->dest)) { net_dbg_ratelimited("rt6_do_redirect: destination address is multicast\n"); return; } on_link = 0; - if (ipv6_addr_equal(dest, target)) { + if (ipv6_addr_equal(&msg->dest, &msg->target)) { on_link = 1; - } else if (ipv6_addr_type(target) != + } else if (ipv6_addr_type(&msg->target) != (IPV6_ADDR_UNICAST|IPV6_ADDR_LINKLOCAL)) { net_dbg_ratelimited("rt6_do_redirect: target address is not link-local unicast\n"); return; @@ -1752,7 +1748,7 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu * first-hop router for the specified ICMP Destination Address. */ - if (!ndisc_parse_options((u8*)(dest + 1), optlen, &ndopts)) { + if (!ndisc_parse_options(msg->opt, optlen, &ndopts)) { net_dbg_ratelimited("rt6_redirect: invalid ND options\n"); return; } @@ -1779,7 +1775,7 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu */ dst_confirm(&rt->dst); - neigh = __neigh_lookup(&nd_tbl, target, skb->dev, 1); + neigh = __neigh_lookup(&nd_tbl, &msg->target, skb->dev, 1); if (!neigh) return; @@ -1799,7 +1795,7 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu NEIGH_UPDATE_F_ISROUTER)) ); - nrt = ip6_rt_copy(rt, dest); + nrt = ip6_rt_copy(rt, &msg->dest); if (!nrt) goto out; @@ -1817,7 +1813,7 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu netevent.old_neigh = old_neigh; netevent.new = &nrt->dst; netevent.new_neigh = neigh; - netevent.daddr = dest; + netevent.daddr = &msg->dest; call_netevent_notifiers(NETEVENT_REDIRECT, &netevent); if (rt->rt6i_flags & RTF_CACHE) { -- cgit v0.10.2 From 5d134f1c1f36166e8a738de92c4d2f4c262ff91b Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 5 Jan 2013 16:10:48 +0000 Subject: tcp: make sysctl_tcp_ecn namespace aware As per suggestion from Eric Dumazet this patch makes tcp_ecn sysctl namespace aware. The reason behind this patch is to ease the testing of ecn problems on the internet and allows applications to tune their own use of ecn. Cc: Eric Dumazet Cc: David Miller Cc: Stephen Hemminger Signed-off-by: Hannes Frederic Sowa Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index 2ae2b83..9b78862 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -61,6 +61,8 @@ struct netns_ipv4 { int sysctl_icmp_ratemask; int sysctl_icmp_errors_use_inbound_ifaddr; + int sysctl_tcp_ecn; + kgid_t sysctl_ping_group_range[2]; long sysctl_tcp_mem[3]; diff --git a/include/net/tcp.h b/include/net/tcp.h index aed42c7..614af8b 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -266,7 +266,6 @@ extern int sysctl_tcp_abort_on_overflow; extern int sysctl_tcp_max_orphans; extern int sysctl_tcp_fack; extern int sysctl_tcp_reordering; -extern int sysctl_tcp_ecn; extern int sysctl_tcp_dsack; extern int sysctl_tcp_wmem[3]; extern int sysctl_tcp_rmem[3]; @@ -504,7 +503,8 @@ static inline __u32 cookie_v4_init_sequence(struct sock *sk, #endif extern __u32 cookie_init_timestamp(struct request_sock *req); -extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *); +extern bool cookie_check_timestamp(struct tcp_options_received *opt, + struct net *net, bool *ecn_ok); /* From net/ipv6/syncookies.c */ extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb); @@ -728,11 +728,12 @@ struct tcp_skb_cb { * notifications, we disable TCP ECN negociation. */ static inline void -TCP_ECN_create_request(struct request_sock *req, const struct sk_buff *skb) +TCP_ECN_create_request(struct request_sock *req, const struct sk_buff *skb, + struct net *net) { const struct tcphdr *th = tcp_hdr(skb); - if (sysctl_tcp_ecn && th->ece && th->cwr && + if (net->ipv4.sysctl_tcp_ecn && th->ece && th->cwr && INET_ECN_is_not_ect(TCP_SKB_CB(skb)->ip_dsfield)) inet_rsk(req)->ecn_ok = 1; } diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c index b236ef0..ef54377 100644 --- a/net/ipv4/syncookies.c +++ b/net/ipv4/syncookies.c @@ -232,7 +232,8 @@ static inline struct sock *get_cookie_sock(struct sock *sk, struct sk_buff *skb, * * return false if we decode an option that should not be. */ -bool cookie_check_timestamp(struct tcp_options_received *tcp_opt, bool *ecn_ok) +bool cookie_check_timestamp(struct tcp_options_received *tcp_opt, + struct net *net, bool *ecn_ok) { /* echoed timestamp, lowest bits contain options */ u32 options = tcp_opt->rcv_tsecr & TSMASK; @@ -247,7 +248,7 @@ bool cookie_check_timestamp(struct tcp_options_received *tcp_opt, bool *ecn_ok) tcp_opt->sack_ok = (options & (1 << 4)) ? TCP_SACK_SEEN : 0; *ecn_ok = (options >> 5) & 1; - if (*ecn_ok && !sysctl_tcp_ecn) + if (*ecn_ok && !net->ipv4.sysctl_tcp_ecn) return false; if (tcp_opt->sack_ok && !sysctl_tcp_sack) @@ -295,7 +296,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, memset(&tcp_opt, 0, sizeof(tcp_opt)); tcp_parse_options(skb, &tcp_opt, &hash_location, 0, NULL); - if (!cookie_check_timestamp(&tcp_opt, &ecn_ok)) + if (!cookie_check_timestamp(&tcp_opt, sock_net(sk), &ecn_ok)) goto out; ret = NULL; diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 7547a6d..a25e1d2 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -538,13 +538,6 @@ static struct ctl_table ipv4_table[] = { .proc_handler = proc_dointvec }, { - .procname = "tcp_ecn", - .data = &sysctl_tcp_ecn, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec - }, - { .procname = "tcp_dsack", .data = &sysctl_tcp_dsack, .maxlen = sizeof(int), @@ -850,6 +843,13 @@ static struct ctl_table ipv4_net_table[] = { .proc_handler = ipv4_ping_group_range, }, { + .procname = "tcp_ecn", + .data = &init_net.ipv4.sysctl_tcp_ecn, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, + { .procname = "tcp_mem", .maxlen = sizeof(init_net.ipv4.sysctl_tcp_mem), .mode = 0644, @@ -882,6 +882,8 @@ static __net_init int ipv4_sysctl_init_net(struct net *net) &net->ipv4.sysctl_icmp_ratemask; table[6].data = &net->ipv4.sysctl_ping_group_range; + table[7].data = + &net->ipv4.sysctl_tcp_ecn; /* Don't export sysctls to unprivileged users */ if (net->user_ns != &init_user_ns) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index a28e4db..38e1184 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -81,8 +81,6 @@ int sysctl_tcp_sack __read_mostly = 1; int sysctl_tcp_fack __read_mostly = 1; int sysctl_tcp_reordering __read_mostly = TCP_FASTRETRANS_THRESH; EXPORT_SYMBOL(sysctl_tcp_reordering); -int sysctl_tcp_ecn __read_mostly = 2; -EXPORT_SYMBOL(sysctl_tcp_ecn); int sysctl_tcp_dsack __read_mostly = 1; int sysctl_tcp_app_win __read_mostly = 31; int sysctl_tcp_adv_win_scale __read_mostly = 1; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 54139fa..c6ce9ca 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1568,7 +1568,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) goto drop_and_free; if (!want_cookie || tmp_opt.tstamp_ok) - TCP_ECN_create_request(req, skb); + TCP_ECN_create_request(req, skb, sock_net(sk)); if (want_cookie) { isn = cookie_v4_init_sequence(sk, skb, &req->mss); @@ -2888,6 +2888,7 @@ EXPORT_SYMBOL(tcp_prot); static int __net_init tcp_sk_init(struct net *net) { + net->ipv4.sysctl_tcp_ecn = 2; return 0; } diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 5d45159..667a6ad 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -314,7 +314,7 @@ static inline void TCP_ECN_send_syn(struct sock *sk, struct sk_buff *skb) struct tcp_sock *tp = tcp_sk(sk); tp->ecn_flags = 0; - if (sysctl_tcp_ecn == 1) { + if (sock_net(sk)->ipv4.sysctl_tcp_ecn == 1) { TCP_SKB_CB(skb)->tcp_flags |= TCPHDR_ECE | TCPHDR_CWR; tp->ecn_flags = TCP_ECN_OK; } diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index 4016197..8a0848b 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -179,7 +179,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) memset(&tcp_opt, 0, sizeof(tcp_opt)); tcp_parse_options(skb, &tcp_opt, &hash_location, 0, NULL); - if (!cookie_check_timestamp(&tcp_opt, &ecn_ok)) + if (!cookie_check_timestamp(&tcp_opt, sock_net(sk), &ecn_ok)) goto out; ret = NULL; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 93825dd..3164ad2 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1027,7 +1027,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) treq->rmt_addr = ipv6_hdr(skb)->saddr; treq->loc_addr = ipv6_hdr(skb)->daddr; if (!want_cookie || tmp_opt.tstamp_ok) - TCP_ECN_create_request(req, skb); + TCP_ECN_create_request(req, skb, sock_net(sk)); treq->iif = sk->sk_bound_dev_if; -- cgit v0.10.2 From 3066af582fd8084d9767ee8a71b8778360813106 Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Sat, 5 Jan 2013 02:53:10 +0000 Subject: team: use strlcpy with ethtool_drvinfo fields The fields must be null-terminated. Signed-off-by: Flavio Leitner Acked-by: Jiri Pirko Acked-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 250f8c1..70d5d6b 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1747,8 +1747,8 @@ static const struct net_device_ops team_netdev_ops = { static void team_ethtool_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) { - strncpy(drvinfo->driver, DRV_NAME, 32); - strncpy(drvinfo->version, UTS_RELEASE, 32); + strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, UTS_RELEASE, sizeof(drvinfo->version)); } static const struct ethtool_ops team_ethtool_ops = { -- cgit v0.10.2 From 483f777266f5da205459c290994bd3cda5f1f6bc Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 4 Jan 2013 16:57:17 +0000 Subject: drivers/net: remove orphaned references to micro channel We threw away the microchannel support, but the removal wasn't completely trivial since there was namespace overlap with the machine check support, and hence some orphaned dependencies survived the deletion. This attempts to sweep those up and send them to the bit-bucket. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index eb56174..8c417ed 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_3COM bool "3Com devices" default y - depends on ISA || EISA || MCA || PCI || PCMCIA + depends on ISA || EISA || PCI || PCMCIA ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -33,8 +33,8 @@ config EL1 will be called 3c501. config EL3 - tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" - depends on (ISA || EISA || MCA) + tristate "3c509/3c579 \"EtherLink III\" support" + depends on (ISA || EISA) ---help--- If you have a network (Ethernet) card belonging to the 3Com EtherLinkIII series, say Y and read the Ethernet-HOWTO, available diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index e1219e0..8801217 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -6,8 +6,8 @@ config NET_VENDOR_8390 bool "National Semi-conductor 8390 devices" default y depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \ - ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \ - MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \ + ISA || EISA || MAC || M32R || MACH_TX49XX || \ + H8300 || ARM || MIPS || ZORRO || PCMCIA || \ EXPERIMENTAL) ---help--- If you have a network (Ethernet) card belonging to this class, say Y @@ -188,10 +188,7 @@ config NE2000 If you have a PCI NE2000 card however, say N here and Y to "PCI NE2000 and clone support" under "EISA, VLB, PCI and on board - controllers" below. If you have a NE2000 card and are running on - an MCA system (a bus system used on some IBM PS/2 computers and - laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", - below. + controllers" below. To compile this driver as a module, choose M here. The module will be called ne. diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index f43038b..8fb462c 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_HYDRA) += hydra.o 8390.o obj-$(CONFIG_LNE390) += lne390.o 8390.o obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o -obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o obj-$(CONFIG_NE3210) += ne3210.o 8390.o obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 8350f4b..3046133 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_AMD default y depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ - (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA + (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA ---help--- If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -107,7 +107,7 @@ config DECLANCE config DEPCA tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" - depends on (ISA || EISA || MCA) + depends on (ISA || EISA) select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index dffee9d..aca1568 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_FUJITSU bool "Fujitsu devices" default y - depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL) + depends on ISA || PCMCIA || (ISA && EXPERIMENTAL) ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -19,7 +19,7 @@ if NET_VENDOR_FUJITSU config AT1700 tristate "AT1700/1720 support (EXPERIMENTAL)" - depends on (ISA || MCA_LEGACY) && EXPERIMENTAL + depends on ISA && EXPERIMENTAL select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 959faf7..70f8c2d 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_I825XX bool "Intel (82586/82593/82596) devices" default y depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \ - ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ + ARCH_ACORN || SNI_RM || SUN3 || \ GSC || BVME6000 || MVME16x || EXPERIMENTAL) ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index ddee406..bde4f3d 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_INTEL bool "Intel devices" default y depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \ - ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ + ARCH_ACORN || SNI_RM || SUN3 || \ GSC || BVME6000 || MVME16x || \ (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \ EXPERIMENTAL -- cgit v0.10.2 From bb65a9cb953fdfe9c507e8dbb6c4ec2540484bd3 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 28 Dec 2012 16:06:28 +0800 Subject: xfrm: removes a superfluous check and add a statistic Remove the check if x->km.state equal to XFRM_STATE_VALID in xfrm_state_check_expire(), which will be done before call xfrm_state_check_expire(). add a LINUX_MIB_XFRMOUTSTATEINVALID statistic to record the outbound error due to invalid xfrm state. Signed-off-by: Li RongQing Signed-off-by: Steffen Klassert diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index fdfba23..b49eab8 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -278,6 +278,7 @@ enum LINUX_MIB_XFRMOUTPOLDEAD, /* XfrmOutPolDead */ LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ + LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ __LINUX_MIB_XFRMMAX }; diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index 95a338c..3670526 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -61,6 +61,12 @@ static int xfrm_output_one(struct sk_buff *skb, int err) } spin_lock_bh(&x->lock); + + if (unlikely(x->km.state != XFRM_STATE_VALID)) { + XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEINVALID); + goto error_nolock; + } + err = xfrm_state_check_expire(x); if (err) { XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEEXPIRED); diff --git a/net/xfrm/xfrm_proc.c b/net/xfrm/xfrm_proc.c index d0a1af8..6039038 100644 --- a/net/xfrm/xfrm_proc.c +++ b/net/xfrm/xfrm_proc.c @@ -43,6 +43,7 @@ static const struct snmp_mib xfrm_mib_list[] = { SNMP_MIB_ITEM("XfrmOutPolDead", LINUX_MIB_XFRMOUTPOLDEAD), SNMP_MIB_ITEM("XfrmOutPolError", LINUX_MIB_XFRMOUTPOLERROR), SNMP_MIB_ITEM("XfrmFwdHdrError", LINUX_MIB_XFRMFWDHDRERROR), + SNMP_MIB_ITEM("XfrmOutStateInvalid", LINUX_MIB_XFRMOUTSTATEINVALID), SNMP_MIB_SENTINEL }; diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 3459692..05db236 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1370,9 +1370,6 @@ int xfrm_state_check_expire(struct xfrm_state *x) if (!x->curlft.use_time) x->curlft.use_time = get_seconds(); - if (x->km.state != XFRM_STATE_VALID) - return -EINVAL; - if (x->curlft.bytes >= x->lft.hard_byte_limit || x->curlft.packets >= x->lft.hard_packet_limit) { x->km.state = XFRM_STATE_EXPIRED; -- cgit v0.10.2 From bca94cffabf5c9f2399da34eab00bd534bf3735b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sat, 5 Jan 2013 20:23:12 -0500 Subject: drivers/net: delete 8390 based EISA drivers. The NS8390 chip was essentially the 1st widespread PC ethernet chip, starting its life on 8 bit ISA cards in the late 1980s. Even with better technologies available (bus mastering etc) the 8390 managed to get used on a few rare EISA cards in the early to mid 1990s. The EISA bus in the x86 world was largely confined to systems ranging from 486 to 586 (essentially 200MHz or lower, and less than 100MB RAM) -- i.e. machines unlikely to be still in service, and even less likely to be running a 3.9+ kernel. On top of that, only one of the five really ever was considered non-experimental; the smc-ultra32 was the one -- since it was largely just an EISA version of the popular smc-ultra ISA card. All the others had such a tiny user base that they simply never could be considered anything more than experimental. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 8801217..e49a442 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_8390 bool "National Semi-conductor 8390 devices" default y depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \ - ISA || EISA || MAC || M32R || MACH_TX49XX || \ + ISA || MAC || M32R || MACH_TX49XX || \ H8300 || ARM || MIPS || ZORRO || PCMCIA || \ EXPERIMENTAL) ---help--- @@ -33,18 +33,6 @@ config EL2 To compile this driver as a module, choose M here. The module will be called 3c503. -config AC3200 - tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" - depends on PCI && (ISA || EISA) && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called ac3200. - config PCMCIA_AXNET tristate "Asix AX88190 PCMCIA support" depends on PCMCIA @@ -86,18 +74,6 @@ config E2100 To compile this driver as a module, choose M here. The module will be called e2100. -config ES3210 - tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" - depends on PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called es3210. - config HPLAN_PLUS tristate "HP PCLAN+ (27247B and 27252A) support" depends on ISA @@ -140,18 +116,6 @@ config ARM_ETHERH If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. -config LNE390 - tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" - depends on PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called lne390. - config MAC8390 bool "Macintosh NS 8390 based ethernet cards" depends on MAC @@ -187,8 +151,7 @@ config NE2000 without a specific driver are compatible with NE2000. If you have a PCI NE2000 card however, say N here and Y to "PCI - NE2000 and clone support" under "EISA, VLB, PCI and on board - controllers" below. + NE2000 and clone support" below. To compile this driver as a module, choose M here. The module will be called ne. @@ -223,19 +186,6 @@ config APNE To compile this driver as a module, choose M here: the module will be called apne. -config NE3210 - tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" - depends on PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . Note that this driver - will NOT WORK for NE3200 cards as they are completely different. - - To compile this driver as a module, choose M here. The module - will be called ne3210. - config PCMCIA_PCNET tristate "NE2000 compatible PCMCIA support" depends on PCMCIA @@ -285,18 +235,6 @@ config ULTRA To compile this driver as a module, choose M here. The module will be called smc-ultra. -config ULTRA32 - tristate "SMC Ultra32 EISA support" - depends on EISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called smc-ultra32. - config WD80x3 tristate "WD80*3 support" depends on ISA diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index 8fb462c..e8bb97c 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -3,26 +3,21 @@ # obj-$(CONFIG_MAC8390) += mac8390.o -obj-$(CONFIG_AC3200) += ac3200.o 8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_AX88796) += ax88796.o obj-$(CONFIG_E2100) += e2100.o 8390.o obj-$(CONFIG_EL2) += 3c503.o 8390p.o -obj-$(CONFIG_ES3210) += es3210.o 8390.o obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o obj-$(CONFIG_HYDRA) += hydra.o 8390.o -obj-$(CONFIG_LNE390) += lne390.o 8390.o obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o -obj-$(CONFIG_NE3210) += ne3210.o 8390.o obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o -obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o obj-$(CONFIG_WD80x3) += wd.o 8390.o obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o diff --git a/drivers/net/ethernet/8390/ac3200.c b/drivers/net/ethernet/8390/ac3200.c deleted file mode 100644 index ccf0794..0000000 --- a/drivers/net/ethernet/8390/ac3200.c +++ /dev/null @@ -1,431 +0,0 @@ -/* ac3200.c: A driver for the Ansel Communications EISA ethernet adaptor. */ -/* - Written 1993, 1994 by Donald Becker. - Copyright 1993 United States Government as represented by the Director, - National Security Agency. This software may only be used and distributed - according to the terms of the GNU General Public License as modified by SRC, - incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is driver for the Ansel Communications Model 3200 EISA Ethernet LAN - Adapter. The programming information is from the users manual, as related - by glee@ardnassak.math.clemson.edu. - - Changelog: - - Paul Gortmaker 05/98 : add support for shared mem above 1MB. - - */ - -static const char version[] = - "ac3200.c:v1.01 7/1/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "8390.h" - -#define DRV_NAME "ac3200" - -/* Offsets from the base address. */ -#define AC_NIC_BASE 0x00 -#define AC_SA_PROM 0x16 /* The station address PROM. */ -#define AC_ADDR0 0x00 /* Prefix station address values. */ -#define AC_ADDR1 0x40 -#define AC_ADDR2 0x90 -#define AC_ID_PORT 0xC80 -#define AC_EISA_ID 0x0110d305 -#define AC_RESET_PORT 0xC84 -#define AC_RESET 0x00 -#define AC_ENABLE 0x01 -#define AC_CONFIG 0xC90 /* The configuration port. */ - -#define AC_IO_EXTENT 0x20 - /* Actually accessed is: - * AC_NIC_BASE (0-15) - * AC_SA_PROM (0-5) - * AC_ID_PORT (0-3) - * AC_RESET_PORT - * AC_CONFIG - */ - -/* Decoding of the configuration register. */ -static unsigned char config2irqmap[8] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; -static int addrmap[8] = -{0xFF0000, 0xFE0000, 0xFD0000, 0xFFF0000, 0xFFE0000, 0xFFC0000, 0xD0000, 0 }; -static const char *port_name[4] = { "10baseT", "invalid", "AUI", "10base2"}; - -#define config2irq(configval) config2irqmap[((configval) >> 3) & 7] -#define config2mem(configval) addrmap[(configval) & 7] -#define config2name(configval) port_name[((configval) >> 6) & 3] - -/* First and last 8390 pages. */ -#define AC_START_PG 0x00 /* First page of 8390 TX buffer */ -#define AC_STOP_PG 0x80 /* Last page +1 of the 8390 RX ring */ - -static int ac_probe1(int ioaddr, struct net_device *dev); - -static int ac_open(struct net_device *dev); -static void ac_reset_8390(struct net_device *dev); -static void ac_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ac_block_output(struct net_device *dev, const int count, - const unsigned char *buf, const int start_page); -static void ac_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); - -static int ac_close_card(struct net_device *dev); - - -/* Probe for the AC3200. - - The AC3200 can be identified by either the EISA configuration registers, - or the unique value in the station address PROM. - */ - -static int __init do_ac3200_probe(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - int irq = dev->irq; - int mem_start = dev->mem_start; - - if (ioaddr > 0x1ff) /* Check a single specified location. */ - return ac_probe1(ioaddr, dev); - else if (ioaddr > 0) /* Don't probe at all. */ - return -ENXIO; - - if ( ! EISA_bus) - return -ENXIO; - - for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { - if (ac_probe1(ioaddr, dev) == 0) - return 0; - dev->irq = irq; - dev->mem_start = mem_start; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init ac3200_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_ac3200_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops ac_netdev_ops = { - .ndo_open = ac_open, - .ndo_stop = ac_close_card, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init ac_probe1(int ioaddr, struct net_device *dev) -{ - int i, retval; - - if (!request_region(ioaddr, AC_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - if (inb_p(ioaddr + AC_ID_PORT) == 0xff) { - retval = -ENODEV; - goto out; - } - - if (inl(ioaddr + AC_ID_PORT) != AC_EISA_ID) { - retval = -ENODEV; - goto out; - } - -#ifndef final_version - printk(KERN_DEBUG "AC3200 ethercard configuration register is %#02x," - " EISA ID %02x %02x %02x %02x.\n", inb(ioaddr + AC_CONFIG), - inb(ioaddr + AC_ID_PORT + 0), inb(ioaddr + AC_ID_PORT + 1), - inb(ioaddr + AC_ID_PORT + 2), inb(ioaddr + AC_ID_PORT + 3)); -#endif - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + AC_SA_PROM + i); - - printk(KERN_DEBUG "AC3200 in EISA slot %d, node %pM", - ioaddr/0x1000, dev->dev_addr); -#if 0 - /* Check the vendor ID/prefix. Redundant after checking the EISA ID */ - if (inb(ioaddr + AC_SA_PROM + 0) != AC_ADDR0 - || inb(ioaddr + AC_SA_PROM + 1) != AC_ADDR1 - || inb(ioaddr + AC_SA_PROM + 2) != AC_ADDR2 ) { - printk(", not found (invalid prefix).\n"); - retval = -ENODEV; - goto out; - } -#endif - - /* Assign and allocate the interrupt now. */ - if (dev->irq == 0) { - dev->irq = config2irq(inb(ioaddr + AC_CONFIG)); - printk(", using"); - } else { - dev->irq = irq_canonicalize(dev->irq); - printk(", assigning"); - } - - retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk (" nothing! Unable to get IRQ %d.\n", dev->irq); - goto out; - } - - printk(" IRQ %d, %s port\n", dev->irq, port_name[dev->if_port]); - - dev->base_addr = ioaddr; - -#ifdef notyet - if (dev->mem_start) { /* Override the value from the board. */ - for (i = 0; i < 7; i++) - if (addrmap[i] == dev->mem_start) - break; - if (i >= 7) - i = 0; - outb((inb(ioaddr + AC_CONFIG) & ~7) | i, ioaddr + AC_CONFIG); - } -#endif - - dev->if_port = inb(ioaddr + AC_CONFIG) >> 6; - dev->mem_start = config2mem(inb(ioaddr + AC_CONFIG)); - - printk("%s: AC3200 at %#3x with %dkB memory at physical address %#lx.\n", - dev->name, ioaddr, AC_STOP_PG/4, dev->mem_start); - - /* - * BEWARE!! Some dain-bramaged EISA SCUs will allow you to put - * the card mem within the region covered by `normal' RAM !!! - * - * ioremap() will fail in that case. - */ - ei_status.mem = ioremap(dev->mem_start, AC_STOP_PG*0x100); - if (!ei_status.mem) { - printk(KERN_ERR "ac3200.c: Unable to remap card memory above 1MB !!\n"); - printk(KERN_ERR "ac3200.c: Try using EISA SCU to set memory below 1MB.\n"); - printk(KERN_ERR "ac3200.c: Driver NOT installed.\n"); - retval = -EINVAL; - goto out1; - } - printk("ac3200.c: remapped %dkB card memory to virtual address %p\n", - AC_STOP_PG/4, ei_status.mem); - - dev->mem_start = (unsigned long)ei_status.mem; - dev->mem_end = dev->mem_start + (AC_STOP_PG - AC_START_PG)*256; - - ei_status.name = "AC3200"; - ei_status.tx_start_page = AC_START_PG; - ei_status.rx_start_page = AC_START_PG + TX_PAGES; - ei_status.stop_page = AC_STOP_PG; - ei_status.word16 = 1; - - if (ei_debug > 0) - printk(version); - - ei_status.reset_8390 = &ac_reset_8390; - ei_status.block_input = &ac_block_input; - ei_status.block_output = &ac_block_output; - ei_status.get_8390_hdr = &ac_get_8390_hdr; - - dev->netdev_ops = &ac_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out2; - return 0; -out2: - if (ei_status.reg0) - iounmap(ei_status.mem); -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, AC_IO_EXTENT); - return retval; -} - -static int ac_open(struct net_device *dev) -{ -#ifdef notyet - /* Someday we may enable the IRQ and shared memory here. */ - int ioaddr = dev->base_addr; -#endif - - ei_open(dev); - return 0; -} - -static void ac_reset_8390(struct net_device *dev) -{ - ushort ioaddr = dev->base_addr; - - outb(AC_RESET, ioaddr + AC_RESET_PORT); - if (ei_debug > 1) printk("resetting AC3200, t=%ld...", jiffies); - - ei_status.txing = 0; - outb(AC_ENABLE, ioaddr + AC_RESET_PORT); - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void -ac_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - AC_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); -} - -/* Block input and output are easy on shared memory ethercards, the only - complication is when the ring buffer wraps. */ - -static void ac_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - void __iomem *start = ei_status.mem + ring_offset - AC_START_PG*256; - - if (ring_offset + count > AC_STOP_PG*256) { - /* We must wrap the input move. */ - int semi_count = AC_STOP_PG*256 - ring_offset; - memcpy_fromio(skb->data, start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, - ei_status.mem + TX_PAGES*256, count); - } else { - memcpy_fromio(skb->data, start, count); - } -} - -static void ac_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - AC_START_PG)<<8); - - memcpy_toio(shmem, buf, count); -} - -static int ac_close_card(struct net_device *dev) -{ - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - -#ifdef notyet - /* We should someday disable shared memory and interrupts. */ - outb(0x00, ioaddr + 6); /* Disable interrupts. */ - free_irq(dev->irq, dev); -#endif - - ei_close(dev); - return 0; -} - -#ifdef MODULE -#define MAX_AC32_CARDS 4 /* Max number of AC32 cards per module */ -static struct net_device *dev_ac32[MAX_AC32_CARDS]; -static int io[MAX_AC32_CARDS]; -static int irq[MAX_AC32_CARDS]; -static int mem[MAX_AC32_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, "Memory base address(es)"); -MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver"); -MODULE_LICENSE("GPL"); - -static int __init ac3200_module_init(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_AC32_CARDS; this_dev++) { - if (io[this_dev] == 0 && this_dev != 0) - break; - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; /* Currently ignored by driver */ - if (do_ac3200_probe(dev) == 0) { - dev_ac32[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "ac3200.c: No ac3200 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* Someday free_irq may be in ac_close_card() */ - free_irq(dev->irq, dev); - release_region(dev->base_addr, AC_IO_EXTENT); - iounmap(ei_status.mem); -} - -static void __exit ac3200_module_exit(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_AC32_CARDS; this_dev++) { - struct net_device *dev = dev_ac32[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -module_init(ac3200_module_init); -module_exit(ac3200_module_exit); -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/es3210.c b/drivers/net/ethernet/8390/es3210.c deleted file mode 100644 index ba1b5c9..0000000 --- a/drivers/net/ethernet/8390/es3210.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - es3210.c - - Linux driver for Racal-Interlan ES3210 EISA Network Adapter - - Copyright (C) 1996, Paul Gortmaker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Information and Code Sources: - - 1) The existing myriad of Linux 8390 drivers written by Donald Becker. - - 2) Once again Russ Nelson's asm packet driver provided additional info. - - 3) Info for getting IRQ and sh-mem gleaned from the EISA cfg files. - Too bad it doesn't work -- see below. - - The ES3210 is an EISA shared memory NS8390 implementation. Note - that all memory copies to/from the board must be 32bit transfers. - Which rules out using eth_io_copy_and_sum() in this driver. - - Apparently there are two slightly different revisions of the - card, since there are two distinct EISA cfg files (!rii0101.cfg - and !rii0102.cfg) One has media select in the cfg file and the - other doesn't. Hopefully this will work with either. - - That is about all I can tell you about it, having never actually - even seen one of these cards. :) Try http://www.interlan.com - if you want more info. - - Thanks go to Mark Salazar for testing v0.02 of this driver. - - Bugs, to-fix, etc: - - 1) The EISA cfg ports that are *supposed* to have the IRQ and shared - mem values just read 0xff all the time. Hrrmpf. Apparently the - same happens with the packet driver as the code for reading - these registers is disabled there. In the meantime, boot with: - ether=,0,0x,eth0 to override the IRQ and - shared memory detection. (The i/o port detection is okay.) - - 2) Module support currently untested. Probably works though. - -*/ - -static const char version[] = - "es3210.c: Driver revision v0.03, 14/09/96\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -static int es_probe1(struct net_device *dev, int ioaddr); - -static void es_reset_8390(struct net_device *dev); - -static void es_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page); -static void es_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset); -static void es_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); - -#define ES_START_PG 0x00 /* First page of TX buffer */ -#define ES_STOP_PG 0x40 /* Last page +1 of RX ring */ - -#define ES_IO_EXTENT 0x37 /* The cfg file says 0xc90 -> 0xcc7 */ -#define ES_ID_PORT 0xc80 /* Same for all EISA cards */ -#define ES_SA_PROM 0xc90 /* Start of e'net addr. */ -#define ES_RESET_PORT 0xc84 /* From the packet driver source */ -#define ES_NIC_OFFSET 0xca0 /* Hello, the 8390 is *here* */ - -#define ES_ADDR0 0x02 /* 3 byte vendor prefix */ -#define ES_ADDR1 0x07 -#define ES_ADDR2 0x01 - -/* - * Two card revisions. EISA ID's are always rev. minor, rev. major,, and - * then the three vendor letters stored in 5 bits each, with an "a" = 1. - * For eg: "rii" = 10010 01001 01001 = 0x4929, which is how the EISA - * config utility determines automagically what config file(s) to use. - */ -#define ES_EISA_ID1 0x01012949 /* !rii0101.cfg */ -#define ES_EISA_ID2 0x02012949 /* !rii0102.cfg */ - -#define ES_CFG1 0xcc0 /* IOPORT(1) --> IOPORT(6) in cfg file */ -#define ES_CFG2 0xcc1 -#define ES_CFG3 0xcc2 -#define ES_CFG4 0xcc3 -#define ES_CFG5 0xcc4 -#define ES_CFG6 0xc84 /* NB: 0xc84 is also "reset" port. */ - -/* - * You can OR any of the following bits together and assign it - * to ES_DEBUG to get verbose driver info during operation. - * Some of these don't do anything yet. - */ - -#define ES_D_PROBE 0x01 -#define ES_D_RX_PKT 0x02 -#define ES_D_TX_PKT 0x04 -#define ED_D_IRQ 0x08 - -#define ES_DEBUG 0 - -static unsigned char lo_irq_map[] __initdata = {3, 4, 5, 6, 7, 9, 10}; -static unsigned char hi_irq_map[] __initdata = {11, 12, 0, 14, 0, 0, 0, 15}; - -/* - * Probe for the card. The best way is to read the EISA ID if it - * is known. Then we check the prefix of the station address - * PROM for a match against the Racal-Interlan assigned value. - */ - -static int __init do_es_probe(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - int irq = dev->irq; - int mem_start = dev->mem_start; - - if (ioaddr > 0x1ff) /* Check a single specified location. */ - return es_probe1(dev, ioaddr); - else if (ioaddr > 0) /* Don't probe at all. */ - return -ENXIO; - - if (!EISA_bus) { -#if ES_DEBUG & ES_D_PROBE - printk("es3210.c: Not EISA bus. Not probing high ports.\n"); -#endif - return -ENXIO; - } - - /* EISA spec allows for up to 16 slots, but 8 is typical. */ - for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { - if (es_probe1(dev, ioaddr) == 0) - return 0; - dev->irq = irq; - dev->mem_start = mem_start; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init es_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_es_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static int __init es_probe1(struct net_device *dev, int ioaddr) -{ - int i, retval; - unsigned long eisa_id; - - if (!request_region(ioaddr + ES_SA_PROM, ES_IO_EXTENT, "es3210")) - return -ENODEV; - -#if ES_DEBUG & ES_D_PROBE - printk("es3210.c: probe at %#x, ID %#8x\n", ioaddr, inl(ioaddr + ES_ID_PORT)); - printk("es3210.c: config regs: %#x %#x %#x %#x %#x %#x\n", - inb(ioaddr + ES_CFG1), inb(ioaddr + ES_CFG2), inb(ioaddr + ES_CFG3), - inb(ioaddr + ES_CFG4), inb(ioaddr + ES_CFG5), inb(ioaddr + ES_CFG6)); -#endif - -/* Check the EISA ID of the card. */ - eisa_id = inl(ioaddr + ES_ID_PORT); - if ((eisa_id != ES_EISA_ID1) && (eisa_id != ES_EISA_ID2)) { - retval = -ENODEV; - goto out; - } - - for (i = 0; i < ETH_ALEN ; i++) - dev->dev_addr[i] = inb(ioaddr + ES_SA_PROM + i); - -/* Check the Racal vendor ID as well. */ - if (dev->dev_addr[0] != ES_ADDR0 || - dev->dev_addr[1] != ES_ADDR1 || - dev->dev_addr[2] != ES_ADDR2) { - printk("es3210.c: card not found %pM (invalid_prefix).\n", - dev->dev_addr); - retval = -ENODEV; - goto out; - } - - printk("es3210.c: ES3210 rev. %ld at %#x, node %pM", - eisa_id>>24, ioaddr, dev->dev_addr); - - /* Snarf the interrupt now. */ - if (dev->irq == 0) { - unsigned char hi_irq = inb(ioaddr + ES_CFG2) & 0x07; - unsigned char lo_irq = inb(ioaddr + ES_CFG1) & 0xfe; - - if (hi_irq != 0) { - dev->irq = hi_irq_map[hi_irq - 1]; - } else { - int i = 0; - while (lo_irq > (1<irq = lo_irq_map[i]; - } - printk(" using IRQ %d", dev->irq); -#if ES_DEBUG & ES_D_PROBE - printk("es3210.c: hi_irq %#x, lo_irq %#x, dev->irq = %d\n", - hi_irq, lo_irq, dev->irq); -#endif - } else { - if (dev->irq == 2) - dev->irq = 9; /* Doh! */ - printk(" assigning IRQ %d", dev->irq); - } - - if (request_irq(dev->irq, ei_interrupt, 0, "es3210", dev)) { - printk (" unable to get IRQ %d.\n", dev->irq); - retval = -EAGAIN; - goto out; - } - - if (dev->mem_start == 0) { - unsigned char mem_enabled = inb(ioaddr + ES_CFG2) & 0xc0; - unsigned char mem_bits = inb(ioaddr + ES_CFG3) & 0x07; - - if (mem_enabled != 0x80) { - printk(" shared mem disabled - giving up\n"); - retval = -ENXIO; - goto out1; - } - dev->mem_start = 0xC0000 + mem_bits*0x4000; - printk(" using "); - } else { - printk(" assigning "); - } - - ei_status.mem = ioremap(dev->mem_start, (ES_STOP_PG - ES_START_PG)*256); - if (!ei_status.mem) { - printk("ioremap failed - giving up\n"); - retval = -ENXIO; - goto out1; - } - - dev->mem_end = dev->mem_start + (ES_STOP_PG - ES_START_PG)*256; - - printk("mem %#lx-%#lx\n", dev->mem_start, dev->mem_end-1); - -#if ES_DEBUG & ES_D_PROBE - if (inb(ioaddr + ES_CFG5)) - printk("es3210: Warning - DMA channel enabled, but not used here.\n"); -#endif - /* Note, point at the 8390, and not the card... */ - dev->base_addr = ioaddr + ES_NIC_OFFSET; - - ei_status.name = "ES3210"; - ei_status.tx_start_page = ES_START_PG; - ei_status.rx_start_page = ES_START_PG + TX_PAGES; - ei_status.stop_page = ES_STOP_PG; - ei_status.word16 = 1; - - if (ei_debug > 0) - printk(version); - - ei_status.reset_8390 = &es_reset_8390; - ei_status.block_input = &es_block_input; - ei_status.block_output = &es_block_output; - ei_status.get_8390_hdr = &es_get_8390_hdr; - - dev->netdev_ops = &ei_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr + ES_SA_PROM, ES_IO_EXTENT); - return retval; -} - -/* - * Reset as per the packet driver method. Judging by the EISA cfg - * file, this just toggles the "Board Enable" bits (bit 2 and 0). - */ - -static void es_reset_8390(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - unsigned long end; - - outb(0x04, ioaddr + ES_RESET_PORT); - if (ei_debug > 1) printk("%s: resetting the ES3210...", dev->name); - - end = jiffies + 2*HZ/100; - while ((signed)(end - jiffies) > 0) continue; - - ei_status.txing = 0; - outb(0x01, ioaddr + ES_RESET_PORT); - if (ei_debug > 1) printk("reset done\n"); -} - -/* - * Note: In the following three functions is the implicit assumption - * that the associated memcpy will only use "rep; movsl" as long as - * we keep the counts as some multiple of doublewords. This is a - * requirement of the hardware, and also prevents us from using - * eth_io_copy_and_sum() since we can't guarantee it will limit - * itself to doubleword access. - */ - -/* - * Grab the 8390 specific header. Similar to the block_input routine, but - * we don't need to be concerned with ring wrap as the header will be at - * the start of a page, so we optimize accordingly. (A single doubleword.) - */ - -static void -es_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - ES_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */ -} - -/* - * Block input and output are easy on shared memory ethercards, the only - * complication is when the ring buffer wraps. The count will already - * be rounded up to a doubleword value via es_get_8390_hdr() above. - */ - -static void es_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - void __iomem *xfer_start = ei_status.mem + ring_offset - ES_START_PG*256; - - if (ring_offset + count > ES_STOP_PG*256) { - /* Packet wraps over end of ring buffer. */ - int semi_count = ES_STOP_PG*256 - ring_offset; - memcpy_fromio(skb->data, xfer_start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, ei_status.mem, count); - } else { - /* Packet is in one chunk. */ - memcpy_fromio(skb->data, xfer_start, count); - } -} - -static void es_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - ES_START_PG)<<8); - - count = (count + 3) & ~3; /* Round up to doubleword */ - memcpy_toio(shmem, buf, count); -} - -#ifdef MODULE -#define MAX_ES_CARDS 4 /* Max number of ES3210 cards per module */ -#define NAMELEN 8 /* # of chars for storing dev->name */ -static struct net_device *dev_es3210[MAX_ES_CARDS]; -static int io[MAX_ES_CARDS]; -static int irq[MAX_ES_CARDS]; -static int mem[MAX_ES_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, "memory base address(es)"); -MODULE_DESCRIPTION("Racal-Interlan ES3210 EISA ethernet driver"); -MODULE_LICENSE("GPL"); - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_ES_CARDS; this_dev++) { - if (io[this_dev] == 0 && this_dev != 0) - break; - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; - if (do_es_probe(dev) == 0) { - dev_es3210[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "es3210.c: No es3210 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, dev); - release_region(dev->base_addr, ES_IO_EXTENT); - iounmap(ei_status.mem); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_ES_CARDS; this_dev++) { - struct net_device *dev = dev_es3210[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ - diff --git a/drivers/net/ethernet/8390/lne390.c b/drivers/net/ethernet/8390/lne390.c deleted file mode 100644 index 479409b..0000000 --- a/drivers/net/ethernet/8390/lne390.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - lne390.c - - Linux driver for Mylex LNE390 EISA Network Adapter - - Copyright (C) 1996-1998, Paul Gortmaker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Information and Code Sources: - - 1) Based upon framework of es3210 driver. - 2) The existing myriad of other Linux 8390 drivers by Donald Becker. - 3) Russ Nelson's asm packet driver provided additional info. - 4) Info for getting IRQ and sh-mem gleaned from the EISA cfg files. - - The LNE390 is an EISA shared memory NS8390 implementation. Note - that all memory copies to/from the board must be 32bit transfers. - There are two versions of the card: the lne390a and the lne390b. - Going by the EISA cfg files, the "a" has jumpers to select between - BNC/AUI, but the "b" also has RJ-45 and selection is via the SCU. - The shared memory address selection is also slightly different. - Note that shared memory address > 1MB are supported with this driver. - - You can try if you want more info, as I've - never even seen one of these cards. :) - - Arnaldo Carvalho de Melo - 2000/09/01 - - get rid of check_region - - no need to check if dev == NULL in lne390_probe1 -*/ - -static const char *version = - "lne390.c: Driver revision v0.99.1, 01/09/2000\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -#define DRV_NAME "lne390" - -static int lne390_probe1(struct net_device *dev, int ioaddr); - -static void lne390_reset_8390(struct net_device *dev); - -static void lne390_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page); -static void lne390_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset); -static void lne390_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page); - -#define LNE390_START_PG 0x00 /* First page of TX buffer */ -#define LNE390_STOP_PG 0x80 /* Last page +1 of RX ring */ - -#define LNE390_ID_PORT 0xc80 /* Same for all EISA cards */ -#define LNE390_IO_EXTENT 0x20 -#define LNE390_SA_PROM 0x16 /* Start of e'net addr. */ -#define LNE390_RESET_PORT 0xc84 /* From the pkt driver source */ -#define LNE390_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */ - -#define LNE390_ADDR0 0x00 /* 3 byte vendor prefix */ -#define LNE390_ADDR1 0x80 -#define LNE390_ADDR2 0xe5 - -#define LNE390_ID0 0x10009835 /* 0x3598 = 01101 01100 11000 = mlx */ -#define LNE390_ID1 0x11009835 /* above is the 390A, this is 390B */ - -#define LNE390_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */ -#define LNE390_CFG2 0xc90 - -/* - * You can OR any of the following bits together and assign it - * to LNE390_DEBUG to get verbose driver info during operation. - * Currently only the probe one is implemented. - */ - -#define LNE390_D_PROBE 0x01 -#define LNE390_D_RX_PKT 0x02 -#define LNE390_D_TX_PKT 0x04 -#define LNE390_D_IRQ 0x08 - -#define LNE390_DEBUG 0 - -static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; -static unsigned int shmem_mapA[] __initdata = {0xff, 0xfe, 0xfd, 0xfff, 0xffe, 0xffc, 0x0d, 0x0}; -static unsigned int shmem_mapB[] __initdata = {0xff, 0xfe, 0x0e, 0xfff, 0xffe, 0xffc, 0x0d, 0x0}; - -/* - * Probe for the card. The best way is to read the EISA ID if it - * is known. Then we can check the prefix of the station address - * PROM for a match against the value assigned to Mylex. - */ - -static int __init do_lne390_probe(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - int irq = dev->irq; - int mem_start = dev->mem_start; - int ret; - - if (ioaddr > 0x1ff) { /* Check a single specified location. */ - if (!request_region(ioaddr, LNE390_IO_EXTENT, DRV_NAME)) - return -EBUSY; - ret = lne390_probe1(dev, ioaddr); - if (ret) - release_region(ioaddr, LNE390_IO_EXTENT); - return ret; - } - else if (ioaddr > 0) /* Don't probe at all. */ - return -ENXIO; - - if (!EISA_bus) { -#if LNE390_DEBUG & LNE390_D_PROBE - printk("lne390-debug: Not an EISA bus. Not probing high ports.\n"); -#endif - return -ENXIO; - } - - /* EISA spec allows for up to 16 slots, but 8 is typical. */ - for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { - if (!request_region(ioaddr, LNE390_IO_EXTENT, DRV_NAME)) - continue; - if (lne390_probe1(dev, ioaddr) == 0) - return 0; - release_region(ioaddr, LNE390_IO_EXTENT); - dev->irq = irq; - dev->mem_start = mem_start; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init lne390_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_lne390_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static int __init lne390_probe1(struct net_device *dev, int ioaddr) -{ - int i, revision, ret; - unsigned long eisa_id; - - if (inb_p(ioaddr + LNE390_ID_PORT) == 0xff) return -ENODEV; - -#if LNE390_DEBUG & LNE390_D_PROBE - printk("lne390-debug: probe at %#x, ID %#8x\n", ioaddr, inl(ioaddr + LNE390_ID_PORT)); - printk("lne390-debug: config regs: %#x %#x\n", - inb(ioaddr + LNE390_CFG1), inb(ioaddr + LNE390_CFG2)); -#endif - - -/* Check the EISA ID of the card. */ - eisa_id = inl(ioaddr + LNE390_ID_PORT); - if ((eisa_id != LNE390_ID0) && (eisa_id != LNE390_ID1)) { - return -ENODEV; - } - - revision = (eisa_id >> 24) & 0x01; /* 0 = rev A, 1 rev B */ - -#if 0 -/* Check the Mylex vendor ID as well. Not really required. */ - if (inb(ioaddr + LNE390_SA_PROM + 0) != LNE390_ADDR0 - || inb(ioaddr + LNE390_SA_PROM + 1) != LNE390_ADDR1 - || inb(ioaddr + LNE390_SA_PROM + 2) != LNE390_ADDR2 ) { - printk("lne390.c: card not found"); - for (i = 0; i < ETH_ALEN; i++) - printk(" %02x", inb(ioaddr + LNE390_SA_PROM + i)); - printk(" (invalid prefix).\n"); - return -ENODEV; - } -#endif - - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(ioaddr + LNE390_SA_PROM + i); - printk("lne390.c: LNE390%X in EISA slot %d, address %pM.\n", - 0xa+revision, ioaddr/0x1000, dev->dev_addr); - - printk("lne390.c: "); - - /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */ - if (dev->irq == 0) { - unsigned char irq_reg = inb(ioaddr + LNE390_CFG2) >> 3; - dev->irq = irq_map[irq_reg & 0x07]; - printk("using"); - } else { - /* This is useless unless we reprogram the card here too */ - if (dev->irq == 2) dev->irq = 9; /* Doh! */ - printk("assigning"); - } - printk(" IRQ %d,", dev->irq); - - if ((ret = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev))) { - printk (" unable to get IRQ %d.\n", dev->irq); - return ret; - } - - if (dev->mem_start == 0) { - unsigned char mem_reg = inb(ioaddr + LNE390_CFG2) & 0x07; - - if (revision) /* LNE390B */ - dev->mem_start = shmem_mapB[mem_reg] * 0x10000; - else /* LNE390A */ - dev->mem_start = shmem_mapA[mem_reg] * 0x10000; - printk(" using "); - } else { - /* Should check for value in shmem_map and reprogram the card to use it */ - dev->mem_start &= 0xfff0000; - printk(" assigning "); - } - - printk("%dkB memory at physical address %#lx\n", - LNE390_STOP_PG/4, dev->mem_start); - - /* - BEWARE!! Some dain-bramaged EISA SCUs will allow you to put - the card mem within the region covered by `normal' RAM !!! - - ioremap() will fail in that case. - */ - ei_status.mem = ioremap(dev->mem_start, LNE390_STOP_PG*0x100); - if (!ei_status.mem) { - printk(KERN_ERR "lne390.c: Unable to remap card memory above 1MB !!\n"); - printk(KERN_ERR "lne390.c: Try using EISA SCU to set memory below 1MB.\n"); - printk(KERN_ERR "lne390.c: Driver NOT installed.\n"); - ret = -EAGAIN; - goto cleanup; - } - printk("lne390.c: remapped %dkB card memory to virtual address %p\n", - LNE390_STOP_PG/4, ei_status.mem); - - dev->mem_start = (unsigned long)ei_status.mem; - dev->mem_end = dev->mem_start + (LNE390_STOP_PG - LNE390_START_PG)*256; - - /* The 8390 offset is zero for the LNE390 */ - dev->base_addr = ioaddr; - - ei_status.name = "LNE390"; - ei_status.tx_start_page = LNE390_START_PG; - ei_status.rx_start_page = LNE390_START_PG + TX_PAGES; - ei_status.stop_page = LNE390_STOP_PG; - ei_status.word16 = 1; - - if (ei_debug > 0) - printk(version); - - ei_status.reset_8390 = &lne390_reset_8390; - ei_status.block_input = &lne390_block_input; - ei_status.block_output = &lne390_block_output; - ei_status.get_8390_hdr = &lne390_get_8390_hdr; - - dev->netdev_ops = &ei_netdev_ops; - NS8390_init(dev, 0); - - ret = register_netdev(dev); - if (ret) - goto unmap; - return 0; -unmap: - if (ei_status.reg0) - iounmap(ei_status.mem); -cleanup: - free_irq(dev->irq, dev); - return ret; -} - -/* - * Reset as per the packet driver method. Judging by the EISA cfg - * file, this just toggles the "Board Enable" bits (bit 2 and 0). - */ - -static void lne390_reset_8390(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - - outb(0x04, ioaddr + LNE390_RESET_PORT); - if (ei_debug > 1) printk("%s: resetting the LNE390...", dev->name); - - mdelay(2); - - ei_status.txing = 0; - outb(0x01, ioaddr + LNE390_RESET_PORT); - if (ei_debug > 1) printk("reset done\n"); -} - -/* - * Note: In the following three functions is the implicit assumption - * that the associated memcpy will only use "rep; movsl" as long as - * we keep the counts as some multiple of doublewords. This is a - * requirement of the hardware, and also prevents us from using - * eth_io_copy_and_sum() since we can't guarantee it will limit - * itself to doubleword access. - */ - -/* - * Grab the 8390 specific header. Similar to the block_input routine, but - * we don't need to be concerned with ring wrap as the header will be at - * the start of a page, so we optimize accordingly. (A single doubleword.) - */ - -static void -lne390_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - LNE390_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */ -} - -/* - * Block input and output are easy on shared memory ethercards, the only - * complication is when the ring buffer wraps. The count will already - * be rounded up to a doubleword value via lne390_get_8390_hdr() above. - */ - -static void lne390_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - void __iomem *xfer_start = ei_status.mem + ring_offset - (LNE390_START_PG<<8); - - if (ring_offset + count > (LNE390_STOP_PG<<8)) { - /* Packet wraps over end of ring buffer. */ - int semi_count = (LNE390_STOP_PG<<8) - ring_offset; - memcpy_fromio(skb->data, xfer_start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, - ei_status.mem + (TX_PAGES<<8), count); - } else { - /* Packet is in one chunk. */ - memcpy_fromio(skb->data, xfer_start, count); - } -} - -static void lne390_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - LNE390_START_PG)<<8); - - count = (count + 3) & ~3; /* Round up to doubleword */ - memcpy_toio(shmem, buf, count); -} - - -#ifdef MODULE -#define MAX_LNE_CARDS 4 /* Max number of LNE390 cards per module */ -static struct net_device *dev_lne[MAX_LNE_CARDS]; -static int io[MAX_LNE_CARDS]; -static int irq[MAX_LNE_CARDS]; -static int mem[MAX_LNE_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, "memory base address(es)"); -MODULE_DESCRIPTION("Mylex LNE390A/B EISA Ethernet driver"); -MODULE_LICENSE("GPL"); - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_LNE_CARDS; this_dev++) { - if (io[this_dev] == 0 && this_dev != 0) - break; - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; - if (do_lne390_probe(dev) == 0) { - dev_lne[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "lne390.c: No LNE390 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, dev); - release_region(dev->base_addr, LNE390_IO_EXTENT); - iounmap(ei_status.mem); -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_LNE_CARDS; this_dev++) { - struct net_device *dev = dev_lne[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ - diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c deleted file mode 100644 index ebcdb52..0000000 --- a/drivers/net/ethernet/8390/ne3210.c +++ /dev/null @@ -1,346 +0,0 @@ -/* - ne3210.c - - Linux driver for Novell NE3210 EISA Network Adapter - - Copyright (C) 1998, Paul Gortmaker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Information and Code Sources: - - 1) Based upon my other EISA 8390 drivers (lne390, es3210, smc-ultra32) - 2) The existing myriad of other Linux 8390 drivers by Donald Becker. - 3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file - - The NE3210 is an EISA shared memory NS8390 implementation. Shared - memory address > 1MB should work with this driver. - - Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched - around (or perhaps there are some defective/backwards cards ???) - - This driver WILL NOT WORK FOR THE NE3200 - it is completely different - and does not use an 8390 at all. - - Updated to EISA probing API 5/2003 by Marc Zyngier. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -#define DRV_NAME "ne3210" - -static void ne3210_reset_8390(struct net_device *dev); - -static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page); -static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset); -static void ne3210_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page); - -#define NE3210_START_PG 0x00 /* First page of TX buffer */ -#define NE3210_STOP_PG 0x80 /* Last page +1 of RX ring */ - -#define NE3210_IO_EXTENT 0x20 -#define NE3210_SA_PROM 0x16 /* Start of e'net addr. */ -#define NE3210_RESET_PORT 0xc84 -#define NE3210_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */ - -#define NE3210_ADDR0 0x00 /* 3 byte vendor prefix */ -#define NE3210_ADDR1 0x00 -#define NE3210_ADDR2 0x1b - -#define NE3210_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */ -#define NE3210_CFG2 0xc90 -#define NE3210_CFG_EXTENT (NE3210_CFG2 - NE3210_CFG1 + 1) - -/* - * You can OR any of the following bits together and assign it - * to NE3210_DEBUG to get verbose driver info during operation. - * Currently only the probe one is implemented. - */ - -#define NE3210_D_PROBE 0x01 -#define NE3210_D_RX_PKT 0x02 -#define NE3210_D_TX_PKT 0x04 -#define NE3210_D_IRQ 0x08 - -#define NE3210_DEBUG 0x0 - -static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; -static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0}; -static const char * const ifmap[] __initconst = {"UTP", "?", "BNC", "AUI"}; -static int ifmap_val[] __initdata = { - IF_PORT_10BASET, - IF_PORT_UNKNOWN, - IF_PORT_10BASE2, - IF_PORT_AUI, -}; - -static int __init ne3210_eisa_probe (struct device *device) -{ - unsigned long ioaddr, phys_mem; - int i, retval, port_index; - struct eisa_device *edev = to_eisa_device (device); - struct net_device *dev; - - /* Allocate dev->priv and fill in 8390 specific dev fields. */ - if (!(dev = alloc_ei_netdev ())) { - printk ("ne3210.c: unable to allocate memory for dev!\n"); - return -ENOMEM; - } - - SET_NETDEV_DEV(dev, device); - dev_set_drvdata(device, dev); - ioaddr = edev->base_addr; - - if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) { - retval = -EBUSY; - goto out; - } - - if (!request_region(ioaddr + NE3210_CFG1, - NE3210_CFG_EXTENT, DRV_NAME)) { - retval = -EBUSY; - goto out1; - } - -#if NE3210_DEBUG & NE3210_D_PROBE - printk("ne3210-debug: probe at %#x, ID %s\n", ioaddr, edev->id.sig); - printk("ne3210-debug: config regs: %#x %#x\n", - inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2)); -#endif - - port_index = inb(ioaddr + NE3210_CFG2) >> 6; - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i); - printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n", - edev->slot, ifmap[port_index], dev->dev_addr); - - /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */ - dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07]; - printk("ne3210.c: using IRQ %d, ", dev->irq); - - retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk (" unable to get IRQ %d.\n", dev->irq); - goto out2; - } - - phys_mem = shmem_map[inb(ioaddr + NE3210_CFG2) & 0x07] * 0x1000; - - /* - BEWARE!! Some dain-bramaged EISA SCUs will allow you to put - the card mem within the region covered by `normal' RAM !!! - */ - if (phys_mem > 1024*1024) { /* phys addr > 1MB */ - if (phys_mem < virt_to_phys(high_memory)) { - printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n"); - printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n"); - printk(KERN_CRIT "ne3210.c: or to an address above 0x%llx.\n", - (u64)virt_to_phys(high_memory)); - printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n"); - retval = -EINVAL; - goto out3; - } - } - - if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) { - printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n", - phys_mem); - goto out3; - } - - printk("%dkB memory at physical address %#lx\n", - NE3210_STOP_PG/4, phys_mem); - - ei_status.mem = ioremap(phys_mem, NE3210_STOP_PG*0x100); - if (!ei_status.mem) { - printk(KERN_ERR "ne3210.c: Unable to remap card memory !!\n"); - printk(KERN_ERR "ne3210.c: Driver NOT installed.\n"); - retval = -EAGAIN; - goto out4; - } - printk("ne3210.c: remapped %dkB card memory to virtual address %p\n", - NE3210_STOP_PG/4, ei_status.mem); - dev->mem_start = (unsigned long)ei_status.mem; - dev->mem_end = dev->mem_start + (NE3210_STOP_PG - NE3210_START_PG)*256; - - /* The 8390 offset is zero for the NE3210 */ - dev->base_addr = ioaddr; - - ei_status.name = "NE3210"; - ei_status.tx_start_page = NE3210_START_PG; - ei_status.rx_start_page = NE3210_START_PG + TX_PAGES; - ei_status.stop_page = NE3210_STOP_PG; - ei_status.word16 = 1; - ei_status.priv = phys_mem; - - if (ei_debug > 0) - printk("ne3210 loaded.\n"); - - ei_status.reset_8390 = &ne3210_reset_8390; - ei_status.block_input = &ne3210_block_input; - ei_status.block_output = &ne3210_block_output; - ei_status.get_8390_hdr = &ne3210_get_8390_hdr; - - dev->netdev_ops = &ei_netdev_ops; - - dev->if_port = ifmap_val[port_index]; - - if ((retval = register_netdev (dev))) - goto out5; - - NS8390_init(dev, 0); - return 0; - - out5: - iounmap(ei_status.mem); - out4: - release_mem_region (phys_mem, NE3210_STOP_PG*0x100); - out3: - free_irq (dev->irq, dev); - out2: - release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT); - out1: - release_region (ioaddr, NE3210_IO_EXTENT); - out: - free_netdev (dev); - - return retval; -} - -static int ne3210_eisa_remove(struct device *device) -{ - struct net_device *dev = dev_get_drvdata(device); - unsigned long ioaddr = to_eisa_device (device)->base_addr; - - unregister_netdev (dev); - iounmap(ei_status.mem); - release_mem_region (ei_status.priv, NE3210_STOP_PG*0x100); - free_irq (dev->irq, dev); - release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT); - release_region (ioaddr, NE3210_IO_EXTENT); - free_netdev (dev); - - return 0; -} - -/* - * Reset by toggling the "Board Enable" bits (bit 2 and 0). - */ - -static void ne3210_reset_8390(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - - outb(0x04, ioaddr + NE3210_RESET_PORT); - if (ei_debug > 1) printk("%s: resetting the NE3210...", dev->name); - - mdelay(2); - - ei_status.txing = 0; - outb(0x01, ioaddr + NE3210_RESET_PORT); - if (ei_debug > 1) printk("reset done\n"); -} - -/* - * Note: In the following three functions is the implicit assumption - * that the associated memcpy will only use "rep; movsl" as long as - * we keep the counts as some multiple of doublewords. This is a - * requirement of the hardware, and also prevents us from using - * eth_io_copy_and_sum() since we can't guarantee it will limit - * itself to doubleword access. - */ - -/* - * Grab the 8390 specific header. Similar to the block_input routine, but - * we don't need to be concerned with ring wrap as the header will be at - * the start of a page, so we optimize accordingly. (A single doubleword.) - */ - -static void -ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - NE3210_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */ -} - -/* - * Block input and output are easy on shared memory ethercards, the only - * complication is when the ring buffer wraps. The count will already - * be rounded up to a doubleword value via ne3210_get_8390_hdr() above. - */ - -static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - void __iomem *start = ei_status.mem + ring_offset - NE3210_START_PG*256; - - if (ring_offset + count > NE3210_STOP_PG*256) { - /* Packet wraps over end of ring buffer. */ - int semi_count = NE3210_STOP_PG*256 - ring_offset; - memcpy_fromio(skb->data, start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, - ei_status.mem + TX_PAGES*256, count); - } else { - /* Packet is in one chunk. */ - memcpy_fromio(skb->data, start, count); - } -} - -static void ne3210_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - NE3210_START_PG)<<8); - - count = (count + 3) & ~3; /* Round up to doubleword */ - memcpy_toio(shmem, buf, count); -} - -static struct eisa_device_id ne3210_ids[] = { - { "EGL0101" }, - { "NVL1801" }, - { "" }, -}; -MODULE_DEVICE_TABLE(eisa, ne3210_ids); - -static struct eisa_driver ne3210_eisa_driver = { - .id_table = ne3210_ids, - .driver = { - .name = "ne3210", - .probe = ne3210_eisa_probe, - .remove = ne3210_eisa_remove, - }, -}; - -MODULE_DESCRIPTION("NE3210 EISA Ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(eisa, ne3210_ids); - -static int ne3210_init(void) -{ - return eisa_driver_register (&ne3210_eisa_driver); -} - -static void ne3210_cleanup(void) -{ - eisa_driver_unregister (&ne3210_eisa_driver); -} - -module_init (ne3210_init); -module_exit (ne3210_cleanup); diff --git a/drivers/net/ethernet/8390/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c deleted file mode 100644 index 923e42a..0000000 --- a/drivers/net/ethernet/8390/smc-ultra32.c +++ /dev/null @@ -1,463 +0,0 @@ -/* smc-ultra32.c: An SMC Ultra32 EISA ethernet driver for linux. - -Sources: - - This driver is based on (cloned from) the ISA SMC Ultra driver - written by Donald Becker. Modifications to support the EISA - version of the card by Paul Gortmaker and Leonard N. Zubkoff. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - -Theory of Operation: - - The SMC Ultra32C card uses the SMC 83c790 chip which is also - found on the ISA SMC Ultra cards. It has a shared memory mode of - operation that makes it similar to the ISA version of the card. - The main difference is that the EISA card has 32KB of RAM, but - only an 8KB window into that memory. The EISA card also can be - set for a bus-mastering mode of operation via the ECU, but that - is not (and probably will never be) supported by this driver. - The ECU should be run to enable shared memory and to disable the - bus-mastering feature for use with linux. - - By programming the 8390 to use only 8KB RAM, the modifications - to the ISA driver can be limited to the probe and initialization - code. This allows easy integration of EISA support into the ISA - driver. However, the driver development kit from SMC provided the - register information for sliding the 8KB window, and hence the 8390 - is programmed to use the full 32KB RAM. - - Unfortunately this required code changes outside the probe/init - routines, and thus we decided to separate the EISA driver from - the ISA one. In this way, ISA users don't end up with a larger - driver due to the EISA code, and EISA users don't end up with a - larger driver due to the ISA EtherEZ PIO code. The driver is - similar to the 3c503/16 driver, in that the window must be set - back to the 1st 8KB of space for access to the two 8390 Tx slots. - - In testing, using only 8KB RAM (3 Tx / 5 Rx) didn't appear to - be a limiting factor, since the EISA bus could get packets off - the card fast enough, but having the use of lots of RAM as Rx - space is extra insurance if interrupt latencies become excessive. - -*/ - -static const char *version = "smc-ultra32.c: 06/97 v1.00\n"; - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -#define DRV_NAME "smc-ultra32" - -static int ultra32_probe1(struct net_device *dev, int ioaddr); -static int ultra32_open(struct net_device *dev); -static void ultra32_reset_8390(struct net_device *dev); -static void ultra32_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void ultra32_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ultra32_block_output(struct net_device *dev, int count, - const unsigned char *buf, - const int start_page); -static int ultra32_close(struct net_device *dev); - -#define ULTRA32_CMDREG 0 /* Offset to ASIC command register. */ -#define ULTRA32_RESET 0x80 /* Board reset, in ULTRA32_CMDREG. */ -#define ULTRA32_MEMENB 0x40 /* Enable the shared memory. */ -#define ULTRA32_NIC_OFFSET 16 /* NIC register offset from the base_addr. */ -#define ULTRA32_IO_EXTENT 32 -#define EN0_ERWCNT 0x08 /* Early receive warning count. */ - -/* - * Defines that apply only to the Ultra32 EISA card. Note that - * "smc" = 10011 01101 00011 = 0x4da3, and hence !smc8010.cfg translates - * into an EISA ID of 0x1080A34D - */ -#define ULTRA32_BASE 0xca0 -#define ULTRA32_ID 0x1080a34d -#define ULTRA32_IDPORT (-0x20) /* 0xc80 */ -/* Config regs 1->7 from the EISA !SMC8010.CFG file. */ -#define ULTRA32_CFG1 0x04 /* 0xca4 */ -#define ULTRA32_CFG2 0x05 /* 0xca5 */ -#define ULTRA32_CFG3 (-0x18) /* 0xc88 */ -#define ULTRA32_CFG4 (-0x17) /* 0xc89 */ -#define ULTRA32_CFG5 (-0x16) /* 0xc8a */ -#define ULTRA32_CFG6 (-0x15) /* 0xc8b */ -#define ULTRA32_CFG7 0x0d /* 0xcad */ - -static void cleanup_card(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA32_NIC_OFFSET; - /* NB: ultra32_close_card() does free_irq */ - release_region(ioaddr, ULTRA32_IO_EXTENT); - iounmap(ei_status.mem); -} - -/* Probe for the Ultra32. This looks like a 8013 with the station - address PROM at I/O ports +8 to +13, with a checksum - following. -*/ - -struct net_device * __init ultra32_probe(int unit) -{ - struct net_device *dev; - int base; - int irq; - int err = -ENODEV; - - if (!EISA_bus) - return ERR_PTR(-ENODEV); - - dev = alloc_ei_netdev(); - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - irq = dev->irq; - - /* EISA spec allows for up to 16 slots, but 8 is typical. */ - for (base = 0x1000 + ULTRA32_BASE; base < 0x9000; base += 0x1000) { - if (ultra32_probe1(dev, base) == 0) - break; - dev->irq = irq; - } - if (base >= 0x9000) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - cleanup_card(dev); -out: - free_netdev(dev); - return ERR_PTR(err); -} - - -static const struct net_device_ops ultra32_netdev_ops = { - .ndo_open = ultra32_open, - .ndo_stop = ultra32_close, - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init ultra32_probe1(struct net_device *dev, int ioaddr) -{ - int i, edge, media, retval; - int checksum = 0; - const char *model_name; - static unsigned version_printed; - /* Values from various config regs. */ - unsigned char idreg; - unsigned char reg4; - const char *ifmap[] = {"UTP No Link", "", "UTP/AUI", "UTP/BNC"}; - - if (!request_region(ioaddr, ULTRA32_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - if (inb(ioaddr + ULTRA32_IDPORT) == 0xff || - inl(ioaddr + ULTRA32_IDPORT) != ULTRA32_ID) { - retval = -ENODEV; - goto out; - } - - media = inb(ioaddr + ULTRA32_CFG7) & 0x03; - edge = inb(ioaddr + ULTRA32_CFG5) & 0x08; - printk("SMC Ultra32 in EISA Slot %d, Media: %s, %s IRQs.\n", - ioaddr >> 12, ifmap[media], - (edge ? "Edge Triggered" : "Level Sensitive")); - - idreg = inb(ioaddr + 7); - reg4 = inb(ioaddr + 4) & 0x7f; - - /* Check the ID nibble. */ - if ((idreg & 0xf0) != 0x20) { /* SMC Ultra */ - retval = -ENODEV; - goto out; - } - - /* Select the station address register set. */ - outb(reg4, ioaddr + 4); - - for (i = 0; i < 8; i++) - checksum += inb(ioaddr + 8 + i); - if ((checksum & 0xff) != 0xff) { - retval = -ENODEV; - goto out; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - model_name = "SMC Ultra32"; - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + 8 + i); - - printk("%s: %s at 0x%X, %pM", - dev->name, model_name, ioaddr, dev->dev_addr); - - /* Switch from the station address to the alternate register set and - read the useful registers there. */ - outb(0x80 | reg4, ioaddr + 4); - - /* Enable FINE16 mode to avoid BIOS ROM width mismatches @ reboot. */ - outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c); - - /* Reset RAM addr. */ - outb(0x00, ioaddr + 0x0b); - - /* Switch back to the station address register set so that the - MS-DOS driver can find the card after a warm boot. */ - outb(reg4, ioaddr + 4); - - if ((inb(ioaddr + ULTRA32_CFG5) & 0x40) == 0) { - printk("\nsmc-ultra32: Card RAM is disabled! " - "Run EISA config utility.\n"); - retval = -ENODEV; - goto out; - } - if ((inb(ioaddr + ULTRA32_CFG2) & 0x04) == 0) - printk("\nsmc-ultra32: Ignoring Bus-Master enable bit. " - "Run EISA config utility.\n"); - - if (dev->irq < 2) { - unsigned char irqmap[] = {0, 9, 3, 5, 7, 10, 11, 15}; - int irq = irqmap[inb(ioaddr + ULTRA32_CFG5) & 0x07]; - if (irq == 0) { - printk(", failed to detect IRQ line.\n"); - retval = -EAGAIN; - goto out; - } - dev->irq = irq; - } - - /* The 8390 isn't at the base address, so fake the offset */ - dev->base_addr = ioaddr + ULTRA32_NIC_OFFSET; - - /* Save RAM address in the unused reg0 to avoid excess inb's. */ - ei_status.reg0 = inb(ioaddr + ULTRA32_CFG3) & 0xfc; - - dev->mem_start = 0xc0000 + ((ei_status.reg0 & 0x7c) << 11); - - ei_status.name = model_name; - ei_status.word16 = 1; - ei_status.tx_start_page = 0; - ei_status.rx_start_page = TX_PAGES; - /* All Ultra32 cards have 32KB memory with an 8KB window. */ - ei_status.stop_page = 128; - - ei_status.mem = ioremap(dev->mem_start, 0x2000); - if (!ei_status.mem) { - printk(", failed to ioremap.\n"); - retval = -ENOMEM; - goto out; - } - dev->mem_end = dev->mem_start + 0x1fff; - - printk(", IRQ %d, 32KB memory, 8KB window at 0x%lx-0x%lx.\n", - dev->irq, dev->mem_start, dev->mem_end); - ei_status.block_input = &ultra32_block_input; - ei_status.block_output = &ultra32_block_output; - ei_status.get_8390_hdr = &ultra32_get_8390_hdr; - ei_status.reset_8390 = &ultra32_reset_8390; - - dev->netdev_ops = &ultra32_netdev_ops; - NS8390_init(dev, 0); - - return 0; -out: - release_region(ioaddr, ULTRA32_IO_EXTENT); - return retval; -} - -static int ultra32_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA32_NIC_OFFSET; /* ASIC addr */ - int irq_flags = (inb(ioaddr + ULTRA32_CFG5) & 0x08) ? 0 : IRQF_SHARED; - int retval; - - retval = request_irq(dev->irq, ei_interrupt, irq_flags, dev->name, dev); - if (retval) - return retval; - - outb(ULTRA32_MEMENB, ioaddr); /* Enable Shared Memory. */ - outb(0x80, ioaddr + ULTRA32_CFG6); /* Enable Interrupts. */ - outb(0x84, ioaddr + 5); /* Enable MEM16 & Disable Bus Master. */ - outb(0x01, ioaddr + 6); /* Enable Interrupts. */ - /* Set the early receive warning level in window 0 high enough not - to receive ERW interrupts. */ - outb_p(E8390_NODMA+E8390_PAGE0, dev->base_addr); - outb(0xff, dev->base_addr + EN0_ERWCNT); - ei_open(dev); - return 0; -} - -static int ultra32_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA32_NIC_OFFSET; /* CMDREG */ - - netif_stop_queue(dev); - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - - outb(0x00, ioaddr + ULTRA32_CFG6); /* Disable Interrupts. */ - outb(0x00, ioaddr + 6); /* Disable interrupts. */ - free_irq(dev->irq, dev); - - NS8390_init(dev, 0); - - return 0; -} - -static void ultra32_reset_8390(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA32_NIC_OFFSET; /* ASIC base addr */ - - outb(ULTRA32_RESET, ioaddr); - if (ei_debug > 1) printk("resetting Ultra32, t=%ld...", jiffies); - ei_status.txing = 0; - - outb(ULTRA32_MEMENB, ioaddr); /* Enable Shared Memory. */ - outb(0x80, ioaddr + ULTRA32_CFG6); /* Enable Interrupts. */ - outb(0x84, ioaddr + 5); /* Enable MEM16 & Disable Bus Master. */ - outb(0x01, ioaddr + 6); /* Enable Interrupts. */ - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void ultra32_get_8390_hdr(struct net_device *dev, - struct e8390_pkt_hdr *hdr, - int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page & 0x1f) << 8); - unsigned int RamReg = dev->base_addr - ULTRA32_NIC_OFFSET + ULTRA32_CFG3; - - /* Select correct 8KB Window. */ - outb(ei_status.reg0 | ((ring_page & 0x60) >> 5), RamReg); - -#ifdef __BIG_ENDIAN - /* Officially this is what we are doing, but the readl() is faster */ - /* unfortunately it isn't endian aware of the struct */ - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = le16_to_cpu(hdr->count); -#else - ((unsigned int*)hdr)[0] = readl(hdr_start); -#endif -} - -/* Block input and output are easy on shared memory ethercards, the only - complication is when the ring buffer wraps, or in this case, when a - packet spans an 8KB boundary. Note that the current 8KB segment is - already set by the get_8390_hdr routine. */ - -static void ultra32_block_input(struct net_device *dev, - int count, - struct sk_buff *skb, - int ring_offset) -{ - void __iomem *xfer_start = ei_status.mem + (ring_offset & 0x1fff); - unsigned int RamReg = dev->base_addr - ULTRA32_NIC_OFFSET + ULTRA32_CFG3; - - if ((ring_offset & ~0x1fff) != ((ring_offset + count - 1) & ~0x1fff)) { - int semi_count = 8192 - (ring_offset & 0x1FFF); - memcpy_fromio(skb->data, xfer_start, semi_count); - count -= semi_count; - if (ring_offset < 96*256) { - /* Select next 8KB Window. */ - ring_offset += semi_count; - outb(ei_status.reg0 | ((ring_offset & 0x6000) >> 13), RamReg); - memcpy_fromio(skb->data + semi_count, ei_status.mem, count); - } else { - /* Select first 8KB Window. */ - outb(ei_status.reg0, RamReg); - memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count); - } - } else { - memcpy_fromio(skb->data, xfer_start, count); - } -} - -static void ultra32_block_output(struct net_device *dev, - int count, - const unsigned char *buf, - int start_page) -{ - void __iomem *xfer_start = ei_status.mem + (start_page<<8); - unsigned int RamReg = dev->base_addr - ULTRA32_NIC_OFFSET + ULTRA32_CFG3; - - /* Select first 8KB Window. */ - outb(ei_status.reg0, RamReg); - - memcpy_toio(xfer_start, buf, count); -} - -#ifdef MODULE -#define MAX_ULTRA32_CARDS 4 /* Max number of Ultra cards per module */ -static struct net_device *dev_ultra[MAX_ULTRA32_CARDS]; - -MODULE_DESCRIPTION("SMC Ultra32 EISA ethernet driver"); -MODULE_LICENSE("GPL"); - -int __init init_module(void) -{ - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_ULTRA32_CARDS; this_dev++) { - struct net_device *dev = ultra32_probe(-1); - if (IS_ERR(dev)) - break; - dev_ultra[found++] = dev; - } - if (found) - return 0; - printk(KERN_WARNING "smc-ultra32.c: No SMC Ultra32 found.\n"); - return -ENXIO; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_ULTRA32_CARDS; this_dev++) { - struct net_device *dev = dev_ultra[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ - -- cgit v0.10.2 From d5374ef13ebda6ec93f0b4af6b30682ea4b14782 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 12 Dec 2012 06:30:55 +0100 Subject: rt2800: refactor RFCSR initialization rt2800_init_rfcsr() is too big, split RF initialization into per chip functions. Code will change, but we should setup the same values onto RF registers and in the same order as before. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 12f93e4..0ece353 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3866,6 +3866,400 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, return rfcsr24; } +static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0x50); + rt2800_rfcsr_write(rt2x00dev, 1, 0x01); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); + rt2800_rfcsr_write(rt2x00dev, 3, 0x75); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x50); + rt2800_rfcsr_write(rt2x00dev, 8, 0x39); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x60); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x75); + rt2800_rfcsr_write(rt2x00dev, 13, 0x75); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x31); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 26, 0x25); + rt2800_rfcsr_write(rt2x00dev, 27, 0x23); + rt2800_rfcsr_write(rt2x00dev, 28, 0x13); + rt2800_rfcsr_write(rt2x00dev, 29, 0x83); + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x00); +} + +static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x60); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x41); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); +} + +static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x08); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf3); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 18, 0x02); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 25, 0x83); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x05); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x98); + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + rt2800_rfcsr_write(rt2x00dev, 54, 0x78); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0x02); + rt2800_rfcsr_write(rt2x00dev, 57, 0x80); + rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 59, 0x09); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0xc1); +} + +static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); + rt2800_rfcsr_write(rt2x00dev, 1, 0x23); + rt2800_rfcsr_write(rt2x00dev, 2, 0x50); + rt2800_rfcsr_write(rt2x00dev, 3, 0x18); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0x33); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0xd2); + rt2800_rfcsr_write(rt2x00dev, 11, 0x42); + rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x5a); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x01); + rt2800_rfcsr_write(rt2x00dev, 18, 0x45); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800_rfcsr_write(rt2x00dev, 28, 0x03); + rt2800_rfcsr_write(rt2x00dev, 29, 0x00); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x01); + rt2800_rfcsr_write(rt2x00dev, 35, 0x03); + rt2800_rfcsr_write(rt2x00dev, 36, 0xbd); + rt2800_rfcsr_write(rt2x00dev, 37, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 38, 0x5f); + rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); + rt2800_rfcsr_write(rt2x00dev, 40, 0x33); + rt2800_rfcsr_write(rt2x00dev, 41, 0x5b); + rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); + rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 46, 0xdd); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); + rt2800_rfcsr_write(rt2x00dev, 48, 0x14); + rt2800_rfcsr_write(rt2x00dev, 49, 0x00); + rt2800_rfcsr_write(rt2x00dev, 50, 0x2d); + rt2800_rfcsr_write(rt2x00dev, 51, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 52, 0x00); + rt2800_rfcsr_write(rt2x00dev, 53, 0x52); + rt2800_rfcsr_write(rt2x00dev, 54, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 55, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 56, 0x00); + rt2800_rfcsr_write(rt2x00dev, 57, 0x52); + rt2800_rfcsr_write(rt2x00dev, 58, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 59, 0x00); + rt2800_rfcsr_write(rt2x00dev, 60, 0x00); + rt2800_rfcsr_write(rt2x00dev, 61, 0x00); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); +} + +static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 3, 0x62); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); + rt2800_rfcsr_write(rt2x00dev, 6, 0x42); + rt2800_rfcsr_write(rt2x00dev, 7, 0x34); + rt2800_rfcsr_write(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 10, 0x61); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); + rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 17, 0x94); + rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); + rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x14); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x41); + rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); + rt2800_rfcsr_write(rt2x00dev, 30, 0x20); + rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); +} + +static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0x70); + rt2800_rfcsr_write(rt2x00dev, 1, 0x81); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 3, 0x02); + rt2800_rfcsr_write(rt2x00dev, 4, 0x4c); + rt2800_rfcsr_write(rt2x00dev, 5, 0x05); + rt2800_rfcsr_write(rt2x00dev, 6, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); + rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); + rt2800_rfcsr_write(rt2x00dev, 12, 0x70); + rt2800_rfcsr_write(rt2x00dev, 13, 0x65); + rt2800_rfcsr_write(rt2x00dev, 14, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rt2800_rfcsr_write(rt2x00dev, 16, 0x4c); + rt2800_rfcsr_write(rt2x00dev, 17, 0x23); + rt2800_rfcsr_write(rt2x00dev, 18, 0xac); + rt2800_rfcsr_write(rt2x00dev, 19, 0x93); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 21, 0xd0); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x15); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 30, 0x09); + rt2800_rfcsr_write(rt2x00dev, 31, 0x10); +} + +static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x88); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + else + rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0xc6); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x00); + + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + else + rt2800_rfcsr_write(rt2x00dev, 25, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + else + rt2800_rfcsr_write(rt2x00dev, 40, 0x4b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd2); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9a); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + else + rt2800_rfcsr_write(rt2x00dev, 46, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x94); + + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + else + rt2800_rfcsr_write(rt2x00dev, 53, 0x84); + rt2800_rfcsr_write(rt2x00dev, 54, 0x78); + rt2800_rfcsr_write(rt2x00dev, 55, 0x44); + rt2800_rfcsr_write(rt2x00dev, 56, 0x22); + rt2800_rfcsr_write(rt2x00dev, 57, 0x80); + rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 59, 0x63); + + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); + else + rt2800_rfcsr_write(rt2x00dev, 61, 0xdd); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); +} + +static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 1, 0x17); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x88); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4d); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x8d); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 24, 0x44); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x20); + rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x89); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0c); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x94); + rt2800_rfcsr_write(rt2x00dev, 50, 0x94); + rt2800_rfcsr_write(rt2x00dev, 51, 0x3a); + rt2800_rfcsr_write(rt2x00dev, 52, 0x48); + rt2800_rfcsr_write(rt2x00dev, 53, 0x44); + rt2800_rfcsr_write(rt2x00dev, 54, 0x38); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0xa1); + rt2800_rfcsr_write(rt2x00dev, 57, 0x00); + rt2800_rfcsr_write(rt2x00dev, 58, 0x39); + rt2800_rfcsr_write(rt2x00dev, 59, 0x07); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0x91); + rt2800_rfcsr_write(rt2x00dev, 62, 0x39); + rt2800_rfcsr_write(rt2x00dev, 63, 0x07); +} + static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; @@ -3889,6 +4283,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) /* * Init RF calibration. */ + if (rt2x00_rt(rt2x00dev, RT3290) || rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392)) { @@ -3907,379 +4302,35 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); } - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090)) { - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800_rfcsr_write(rt2x00dev, 7, 0x60); - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 10, 0x41); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); - } else if (rt2x00_rt(rt2x00dev, RT3290)) { - rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x08); - rt2800_rfcsr_write(rt2x00dev, 4, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf3); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 18, 0x02); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 25, 0x83); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x05); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - rt2800_rfcsr_write(rt2x00dev, 47, 0x00); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x98); - rt2800_rfcsr_write(rt2x00dev, 52, 0x38); - rt2800_rfcsr_write(rt2x00dev, 53, 0x00); - rt2800_rfcsr_write(rt2x00dev, 54, 0x78); - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - rt2800_rfcsr_write(rt2x00dev, 56, 0x02); - rt2800_rfcsr_write(rt2x00dev, 57, 0x80); - rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x09); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0xc1); - } else if (rt2x00_rt(rt2x00dev, RT3390)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 3, 0x62); - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); - rt2800_rfcsr_write(rt2x00dev, 6, 0x42); - rt2800_rfcsr_write(rt2x00dev, 7, 0x34); - rt2800_rfcsr_write(rt2x00dev, 8, 0x00); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 10, 0x61); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); - rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 17, 0x94); - rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); - rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x14); - rt2800_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 28, 0x41); - rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); - rt2800_rfcsr_write(rt2x00dev, 30, 0x20); - rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); - } else if (rt2x00_rt(rt2x00dev, RT3572)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0x70); - rt2800_rfcsr_write(rt2x00dev, 1, 0x81); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 3, 0x02); - rt2800_rfcsr_write(rt2x00dev, 4, 0x4c); - rt2800_rfcsr_write(rt2x00dev, 5, 0x05); - rt2800_rfcsr_write(rt2x00dev, 6, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); - rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); - rt2800_rfcsr_write(rt2x00dev, 12, 0x70); - rt2800_rfcsr_write(rt2x00dev, 13, 0x65); - rt2800_rfcsr_write(rt2x00dev, 14, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rt2800_rfcsr_write(rt2x00dev, 16, 0x4c); - rt2800_rfcsr_write(rt2x00dev, 17, 0x23); - rt2800_rfcsr_write(rt2x00dev, 18, 0xac); - rt2800_rfcsr_write(rt2x00dev, 19, 0x93); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 21, 0xd0); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x15); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 30, 0x09); - rt2800_rfcsr_write(rt2x00dev, 31, 0x10); - } else if (rt2800_is_305x_soc(rt2x00dev)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0x50); - rt2800_rfcsr_write(rt2x00dev, 1, 0x01); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); - rt2800_rfcsr_write(rt2x00dev, 3, 0x75); - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800_rfcsr_write(rt2x00dev, 7, 0x50); - rt2800_rfcsr_write(rt2x00dev, 8, 0x39); - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 10, 0x60); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x75); - rt2800_rfcsr_write(rt2x00dev, 13, 0x75); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x31); - rt2800_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800_rfcsr_write(rt2x00dev, 26, 0x25); - rt2800_rfcsr_write(rt2x00dev, 27, 0x23); - rt2800_rfcsr_write(rt2x00dev, 28, 0x13); - rt2800_rfcsr_write(rt2x00dev, 29, 0x83); - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); - rt2800_rfcsr_write(rt2x00dev, 31, 0x00); + if (rt2800_is_305x_soc(rt2x00dev)) { + rt2800_init_rfcsr_305x_soc(rt2x00dev); return 0; - } else if (rt2x00_rt(rt2x00dev, RT3352)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); - rt2800_rfcsr_write(rt2x00dev, 1, 0x23); - rt2800_rfcsr_write(rt2x00dev, 2, 0x50); - rt2800_rfcsr_write(rt2x00dev, 3, 0x18); - rt2800_rfcsr_write(rt2x00dev, 4, 0x00); - rt2800_rfcsr_write(rt2x00dev, 5, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0x33); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0xd2); - rt2800_rfcsr_write(rt2x00dev, 11, 0x42); - rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); - rt2800_rfcsr_write(rt2x00dev, 13, 0x00); - rt2800_rfcsr_write(rt2x00dev, 14, 0x5a); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x01); - rt2800_rfcsr_write(rt2x00dev, 18, 0x45); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x00); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x00); - rt2800_rfcsr_write(rt2x00dev, 24, 0x00); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 26, 0x00); - rt2800_rfcsr_write(rt2x00dev, 27, 0x03); - rt2800_rfcsr_write(rt2x00dev, 28, 0x03); - rt2800_rfcsr_write(rt2x00dev, 29, 0x00); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x01); - rt2800_rfcsr_write(rt2x00dev, 35, 0x03); - rt2800_rfcsr_write(rt2x00dev, 36, 0xbd); - rt2800_rfcsr_write(rt2x00dev, 37, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 38, 0x5f); - rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); - rt2800_rfcsr_write(rt2x00dev, 40, 0x33); - rt2800_rfcsr_write(rt2x00dev, 41, 0x5b); - rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); - rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 46, 0xdd); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); - rt2800_rfcsr_write(rt2x00dev, 48, 0x14); - rt2800_rfcsr_write(rt2x00dev, 49, 0x00); - rt2800_rfcsr_write(rt2x00dev, 50, 0x2d); - rt2800_rfcsr_write(rt2x00dev, 51, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 52, 0x00); - rt2800_rfcsr_write(rt2x00dev, 53, 0x52); - rt2800_rfcsr_write(rt2x00dev, 54, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 55, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 56, 0x00); - rt2800_rfcsr_write(rt2x00dev, 57, 0x52); - rt2800_rfcsr_write(rt2x00dev, 58, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 59, 0x00); - rt2800_rfcsr_write(rt2x00dev, 60, 0x00); - rt2800_rfcsr_write(rt2x00dev, 61, 0x00); - rt2800_rfcsr_write(rt2x00dev, 62, 0x00); - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - } else if (rt2x00_rt(rt2x00dev, RT5390)) { - rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x88); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); - else - rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0xc6); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x00); - - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x00); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 23, 0x00); - rt2800_rfcsr_write(rt2x00dev, 24, 0x00); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - else - rt2800_rfcsr_write(rt2x00dev, 25, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 26, 0x00); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); - else - rt2800_rfcsr_write(rt2x00dev, 40, 0x4b); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd2); - rt2800_rfcsr_write(rt2x00dev, 43, 0x9a); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - else - rt2800_rfcsr_write(rt2x00dev, 46, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 47, 0x00); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x94); - - rt2800_rfcsr_write(rt2x00dev, 52, 0x38); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 53, 0x00); - else - rt2800_rfcsr_write(rt2x00dev, 53, 0x84); - rt2800_rfcsr_write(rt2x00dev, 54, 0x78); - rt2800_rfcsr_write(rt2x00dev, 55, 0x44); - rt2800_rfcsr_write(rt2x00dev, 56, 0x22); - rt2800_rfcsr_write(rt2x00dev, 57, 0x80); - rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x63); - - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); - else - rt2800_rfcsr_write(rt2x00dev, 61, 0xdd); - rt2800_rfcsr_write(rt2x00dev, 62, 0x00); - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - } else if (rt2x00_rt(rt2x00dev, RT5392)) { - rt2800_rfcsr_write(rt2x00dev, 1, 0x17); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x88); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4d); - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x8d); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 23, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 24, 0x44); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x20); - rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x89); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0c); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x94); - rt2800_rfcsr_write(rt2x00dev, 50, 0x94); - rt2800_rfcsr_write(rt2x00dev, 51, 0x3a); - rt2800_rfcsr_write(rt2x00dev, 52, 0x48); - rt2800_rfcsr_write(rt2x00dev, 53, 0x44); - rt2800_rfcsr_write(rt2x00dev, 54, 0x38); - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - rt2800_rfcsr_write(rt2x00dev, 56, 0xa1); - rt2800_rfcsr_write(rt2x00dev, 57, 0x00); - rt2800_rfcsr_write(rt2x00dev, 58, 0x39); - rt2800_rfcsr_write(rt2x00dev, 59, 0x07); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0x91); - rt2800_rfcsr_write(rt2x00dev, 62, 0x39); - rt2800_rfcsr_write(rt2x00dev, 63, 0x07); + } + + switch (rt2x00dev->chip.rt) { + case RT3070: + case RT3071: + case RT3090: + rt2800_init_rfcsr_30xx(rt2x00dev); + break; + case RT3290: + rt2800_init_rfcsr_3290(rt2x00dev); + break; + case RT3352: + rt2800_init_rfcsr_3352(rt2x00dev); + break; + case RT3390: + rt2800_init_rfcsr_3390(rt2x00dev); + break; + case RT3572: + rt2800_init_rfcsr_3572(rt2x00dev); + break; + case RT5390: + rt2800_init_rfcsr_5390(rt2x00dev); + break; + case RT5392: + rt2800_init_rfcsr_5392(rt2x00dev); + break; } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { -- cgit v0.10.2 From b81950b165ff71d826fcac851153f9265a83d9ab Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 12 Dec 2012 13:14:22 +0100 Subject: ath9k: use the devres API for allocations/mappings Signed-off-by: Felix Fietkau Acked-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c index 3a69804..d1ff3c2 100644 --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -86,29 +86,25 @@ static int ath_ahb_probe(struct platform_device *pdev) if (!pdev->dev.platform_data) { dev_err(&pdev->dev, "no platform data specified\n"); - ret = -EINVAL; - goto err_out; + return -EINVAL; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no memory resource found\n"); - ret = -ENXIO; - goto err_out; + return -ENXIO; } - mem = ioremap_nocache(res->start, resource_size(res)); + mem = devm_ioremap_nocache(&pdev->dev, res->start, resource_size(res)); if (mem == NULL) { dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto err_out; + return -ENOMEM; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { dev_err(&pdev->dev, "no IRQ resource found\n"); - ret = -ENXIO; - goto err_iounmap; + return -ENXIO; } irq = res->start; @@ -116,8 +112,7 @@ static int ath_ahb_probe(struct platform_device *pdev) hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); if (hw == NULL) { dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); - ret = -ENOMEM; - goto err_iounmap; + return -ENOMEM; } SET_IEEE80211_DEV(hw, &pdev->dev); @@ -156,9 +151,6 @@ static int ath_ahb_probe(struct platform_device *pdev) err_free_hw: ieee80211_free_hw(hw); platform_set_drvdata(pdev, NULL); - err_iounmap: - iounmap(mem); - err_out: return ret; } @@ -168,12 +160,10 @@ static int ath_ahb_remove(struct platform_device *pdev) if (hw) { struct ath_softc *sc = hw->priv; - void __iomem *mem = sc->mem; ath9k_deinit_device(sc); free_irq(sc->irq, sc); ieee80211_free_hw(sc->hw); - iounmap(mem); platform_set_drvdata(pdev, NULL); } diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 86e26a1..7250107 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -109,14 +109,11 @@ struct ath_descdma { void *dd_desc; dma_addr_t dd_desc_paddr; u32 dd_desc_len; - struct ath_buf *dd_bufptr; }; int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, struct list_head *head, const char *name, int nbuf, int ndesc, bool is_tx); -void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd, - struct list_head *head); /***********/ /* RX / TX */ @@ -320,7 +317,6 @@ struct ath_rx { spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; - struct ath_buf *rx_bufptr; struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX]; struct sk_buff *frag; @@ -345,7 +341,6 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an); void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_init(struct ath_softc *sc, int nbufs); -void ath_tx_cleanup(struct ath_softc *sc); int ath_txq_update(struct ath_softc *sc, int qnum, struct ath9k_tx_queue_info *q); void ath_update_max_aggr_framelen(struct ath_softc *sc, int queue, int txop); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index f69ef5d..0f00a13 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -337,7 +337,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, struct ath_common *common = ath9k_hw_common(sc->sc_ah); u8 *ds; struct ath_buf *bf; - int i, bsize, error, desc_len; + int i, bsize, desc_len; ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n", name, nbuf, ndesc); @@ -353,8 +353,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, if ((desc_len % 4) != 0) { ath_err(common, "ath_desc not DWORD aligned\n"); BUG_ON((desc_len % 4) != 0); - error = -ENOMEM; - goto fail; + return -ENOMEM; } dd->dd_desc_len = desc_len * nbuf * ndesc; @@ -378,12 +377,11 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, } /* allocate descriptors */ - dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len, - &dd->dd_desc_paddr, GFP_KERNEL); - if (dd->dd_desc == NULL) { - error = -ENOMEM; - goto fail; - } + dd->dd_desc = dmam_alloc_coherent(sc->dev, dd->dd_desc_len, + &dd->dd_desc_paddr, GFP_KERNEL); + if (!dd->dd_desc) + return -ENOMEM; + ds = (u8 *) dd->dd_desc; ath_dbg(common, CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", name, ds, (u32) dd->dd_desc_len, @@ -391,12 +389,9 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, /* allocate buffers */ bsize = sizeof(struct ath_buf) * nbuf; - bf = kzalloc(bsize, GFP_KERNEL); - if (bf == NULL) { - error = -ENOMEM; - goto fail2; - } - dd->dd_bufptr = bf; + bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); + if (!bf) + return -ENOMEM; for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { bf->bf_desc = ds; @@ -422,12 +417,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, list_add_tail(&bf->list, head); } return 0; -fail2: - dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, - dd->dd_desc_paddr); -fail: - memset(dd, 0, sizeof(*dd)); - return error; } static int ath9k_init_queues(struct ath_softc *sc) @@ -457,11 +446,13 @@ static int ath9k_init_channels_rates(struct ath_softc *sc) ATH9K_NUM_CHANNELS); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) { - channels = kmemdup(ath9k_2ghz_chantable, + channels = devm_kzalloc(sc->dev, sizeof(ath9k_2ghz_chantable), GFP_KERNEL); if (!channels) return -ENOMEM; + memcpy(channels, ath9k_2ghz_chantable, + sizeof(ath9k_2ghz_chantable)); sc->sbands[IEEE80211_BAND_2GHZ].channels = channels; sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; sc->sbands[IEEE80211_BAND_2GHZ].n_channels = @@ -472,14 +463,13 @@ static int ath9k_init_channels_rates(struct ath_softc *sc) } if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) { - channels = kmemdup(ath9k_5ghz_chantable, + channels = devm_kzalloc(sc->dev, sizeof(ath9k_5ghz_chantable), GFP_KERNEL); - if (!channels) { - if (sc->sbands[IEEE80211_BAND_2GHZ].channels) - kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels); + if (!channels) return -ENOMEM; - } + memcpy(channels, ath9k_5ghz_chantable, + sizeof(ath9k_5ghz_chantable)); sc->sbands[IEEE80211_BAND_5GHZ].channels = channels; sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; sc->sbands[IEEE80211_BAND_5GHZ].n_channels = @@ -565,7 +555,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, int ret = 0, i; int csz = 0; - ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL); + ah = devm_kzalloc(sc->dev, sizeof(struct ath_hw), GFP_KERNEL); if (!ah) return -ENOMEM; @@ -636,7 +626,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, if (pdata && pdata->eeprom_name) { ret = ath9k_eeprom_request(sc, pdata->eeprom_name); if (ret) - goto err_eeprom; + return ret; } /* Initializes the hardware for all supported chipsets */ @@ -676,10 +666,6 @@ err_queues: ath9k_hw_deinit(ah); err_hw: ath9k_eeprom_release(sc); -err_eeprom: - kfree(ah); - sc->sc_ah = NULL; - return ret; } @@ -844,8 +830,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, /* Bring up device */ error = ath9k_init_softc(devid, sc, bus_ops); - if (error != 0) - goto error_init; + if (error) + return error; ah = sc->sc_ah; common = ath9k_hw_common(ah); @@ -855,19 +841,19 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, error = ath_regd_init(&common->regulatory, sc->hw->wiphy, ath9k_reg_notifier); if (error) - goto error_regd; + goto deinit; reg = &common->regulatory; /* Setup TX DMA */ error = ath_tx_init(sc, ATH_TXBUF); if (error != 0) - goto error_tx; + goto deinit; /* Setup RX DMA */ error = ath_rx_init(sc, ATH_RXBUF); if (error != 0) - goto error_rx; + goto deinit; ath9k_init_txpower_limits(sc); @@ -881,19 +867,19 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, /* Register with mac80211 */ error = ieee80211_register_hw(hw); if (error) - goto error_register; + goto rx_cleanup; error = ath9k_init_debug(ah); if (error) { ath_err(common, "Unable to create debugfs files\n"); - goto error_world; + goto unregister; } /* Handle world regulatory */ if (!ath_is_world_regd(reg)) { error = regulatory_hint(hw->wiphy, reg->alpha2); if (error) - goto error_world; + goto unregister; } ath_init_leds(sc); @@ -901,17 +887,12 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, return 0; -error_world: +unregister: ieee80211_unregister_hw(hw); -error_register: +rx_cleanup: ath_rx_cleanup(sc); -error_rx: - ath_tx_cleanup(sc); -error_tx: - /* Nothing */ -error_regd: +deinit: ath9k_deinit_softc(sc); -error_init: return error; } @@ -923,12 +904,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) { int i = 0; - if (sc->sbands[IEEE80211_BAND_2GHZ].channels) - kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels); - - if (sc->sbands[IEEE80211_BAND_5GHZ].channels) - kfree(sc->sbands[IEEE80211_BAND_5GHZ].channels); - ath9k_deinit_btcoex(sc); for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) @@ -940,8 +915,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) sc->dfs_detector->exit(sc->dfs_detector); ath9k_eeprom_release(sc); - kfree(sc->sc_ah); - sc->sc_ah = NULL; } void ath9k_deinit_device(struct ath_softc *sc) @@ -957,22 +930,9 @@ void ath9k_deinit_device(struct ath_softc *sc) ieee80211_unregister_hw(hw); ath_rx_cleanup(sc); - ath_tx_cleanup(sc); ath9k_deinit_softc(sc); } -void ath_descdma_cleanup(struct ath_softc *sc, - struct ath_descdma *dd, - struct list_head *head) -{ - dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, - dd->dd_desc_paddr); - - INIT_LIST_HEAD(head); - kfree(dd->dd_bufptr); - memset(dd, 0, sizeof(*dd)); -} - /************************/ /* Module Hooks */ /************************/ diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c index 5c02702..d207433 100644 --- a/drivers/net/wireless/ath/ath9k/mci.c +++ b/drivers/net/wireless/ath/ath9k/mci.c @@ -438,7 +438,7 @@ int ath_mci_setup(struct ath_softc *sc) struct ath_mci_buf *buf = &mci->sched_buf; int ret; - buf->bf_addr = dma_alloc_coherent(sc->dev, + buf->bf_addr = dmam_alloc_coherent(sc->dev, ATH_MCI_SCHED_BUF_SIZE + ATH_MCI_GPM_BUF_SIZE, &buf->bf_paddr, GFP_KERNEL); @@ -477,11 +477,6 @@ void ath_mci_cleanup(struct ath_softc *sc) struct ath_mci_coex *mci = &sc->mci_coex; struct ath_mci_buf *buf = &mci->sched_buf; - if (buf->bf_addr) - dma_free_coherent(sc->dev, - ATH_MCI_SCHED_BUF_SIZE + ATH_MCI_GPM_BUF_SIZE, - buf->bf_addr, buf->bf_paddr); - ar9003_mci_cleanup(ah); ath_dbg(common, MCI, "MCI De-Initialized\n"); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 7ae73fb..0e0d395 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -147,7 +147,6 @@ static const struct ath_bus_ops ath_pci_bus_ops = { static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - void __iomem *mem; struct ath_softc *sc; struct ieee80211_hw *hw; u8 csz; @@ -155,19 +154,19 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) int ret = 0; char hw_name[64]; - if (pci_enable_device(pdev)) + if (pcim_enable_device(pdev)) return -EIO; ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { pr_err("32-bit DMA not available\n"); - goto err_dma; + return ret; } ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { pr_err("32-bit DMA consistent DMA enable failed\n"); - goto err_dma; + return ret; } /* @@ -203,25 +202,16 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - ret = pci_request_region(pdev, 0, "ath9k"); + ret = pcim_iomap_regions(pdev, BIT(0), "ath9k"); if (ret) { dev_err(&pdev->dev, "PCI memory region reserve error\n"); - ret = -ENODEV; - goto err_region; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - pr_err("PCI memory map error\n") ; - ret = -EIO; - goto err_iomap; + return -ENODEV; } hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); if (!hw) { dev_err(&pdev->dev, "No memory for ieee80211_hw\n"); - ret = -ENOMEM; - goto err_alloc_hw; + return -ENOMEM; } SET_IEEE80211_DEV(hw, &pdev->dev); @@ -230,7 +220,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) sc = hw->priv; sc->hw = hw; sc->dev = &pdev->dev; - sc->mem = mem; + sc->mem = pcim_iomap_table(pdev)[0]; /* Will be cleared in ath9k_start() */ set_bit(SC_OP_INVALID, &sc->sc_flags); @@ -251,7 +241,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name)); wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", - hw_name, (unsigned long)mem, pdev->irq); + hw_name, (unsigned long)sc->mem, pdev->irq); return 0; @@ -259,14 +249,6 @@ err_init: free_irq(sc->irq, sc); err_irq: ieee80211_free_hw(hw); -err_alloc_hw: - pci_iounmap(pdev, mem); -err_iomap: - pci_release_region(pdev, 0); -err_region: - /* Nothing */ -err_dma: - pci_disable_device(pdev); return ret; } @@ -274,17 +256,12 @@ static void ath_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_softc *sc = hw->priv; - void __iomem *mem = sc->mem; if (!is_ath9k_unloaded) sc->sc_ah->ah_flags |= AH_UNPLUGGED; ath9k_deinit_device(sc); free_irq(sc->irq, sc); ieee80211_free_hw(sc->hw); - - pci_iounmap(pdev, mem); - pci_disable_device(pdev); - pci_release_region(pdev, 0); } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d4df98a..3d236ae 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -180,11 +180,6 @@ static void ath_rx_edma_cleanup(struct ath_softc *sc) bf->bf_mpdu = NULL; } } - - INIT_LIST_HEAD(&sc->rx.rxbuf); - - kfree(sc->rx.rx_bufptr); - sc->rx.rx_bufptr = NULL; } static void ath_rx_edma_init_queue(struct ath_rx_edma *rx_edma, int size) @@ -211,12 +206,11 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs) ah->caps.rx_hp_qdepth); size = sizeof(struct ath_buf) * nbufs; - bf = kzalloc(size, GFP_KERNEL); + bf = devm_kzalloc(sc->dev, size, GFP_KERNEL); if (!bf) return -ENOMEM; INIT_LIST_HEAD(&sc->rx.rxbuf); - sc->rx.rx_bufptr = bf; for (i = 0; i < nbufs; i++, bf++) { skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL); @@ -363,9 +357,6 @@ void ath_rx_cleanup(struct ath_softc *sc) bf->bf_mpdu = NULL; } } - - if (sc->rx.rxdma.dd_desc_len != 0) - ath_descdma_cleanup(sc, &sc->rx.rxdma, &sc->rx.rxbuf); } } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 90e48a0..ca4a034 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2361,8 +2361,8 @@ static int ath_txstatus_setup(struct ath_softc *sc, int size) u8 txs_len = sc->sc_ah->caps.txs_len; dd->dd_desc_len = size * txs_len; - dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len, - &dd->dd_desc_paddr, GFP_KERNEL); + dd->dd_desc = dmam_alloc_coherent(sc->dev, dd->dd_desc_len, + &dd->dd_desc_paddr, GFP_KERNEL); if (!dd->dd_desc) return -ENOMEM; @@ -2382,14 +2382,6 @@ static int ath_tx_edma_init(struct ath_softc *sc) return err; } -static void ath_tx_edma_cleanup(struct ath_softc *sc) -{ - struct ath_descdma *dd = &sc->txsdma; - - dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, - dd->dd_desc_paddr); -} - int ath_tx_init(struct ath_softc *sc, int nbufs) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); @@ -2402,7 +2394,7 @@ int ath_tx_init(struct ath_softc *sc, int nbufs) if (error != 0) { ath_err(common, "Failed to allocate tx descriptors: %d\n", error); - goto err; + return error; } error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf, @@ -2410,36 +2402,17 @@ int ath_tx_init(struct ath_softc *sc, int nbufs) if (error != 0) { ath_err(common, "Failed to allocate beacon descriptors: %d\n", error); - goto err; + return error; } INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work); - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) error = ath_tx_edma_init(sc); - if (error) - goto err; - } - -err: - if (error != 0) - ath_tx_cleanup(sc); return error; } -void ath_tx_cleanup(struct ath_softc *sc) -{ - if (sc->beacon.bdma.dd_desc_len != 0) - ath_descdma_cleanup(sc, &sc->beacon.bdma, &sc->beacon.bbuf); - - if (sc->tx.txdma.dd_desc_len != 0) - ath_descdma_cleanup(sc, &sc->tx.txdma, &sc->tx.txbuf); - - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_tx_edma_cleanup(sc); -} - void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) { struct ath_atx_tid *tid; -- cgit v0.10.2 From c1b976d2fcb3b308906be7c6bda1390251dec32d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 12 Dec 2012 13:14:23 +0100 Subject: ath9k_hw: use the devres API for allocations Signed-off-by: Felix Fietkau Acked-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index 874186b..fd69376 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -470,16 +470,15 @@ static void ar5008_hw_spur_mitigate(struct ath_hw *ah, static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) { #define ATH_ALLOC_BANK(bank, size) do { \ - bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \ - if (!bank) { \ - ath_err(common, "Cannot allocate RF banks\n"); \ - return -ENOMEM; \ - } \ + bank = devm_kzalloc(ah->dev, sizeof(u32) * size, GFP_KERNEL); \ + if (!bank) \ + goto error; \ } while (0); struct ath_common *common = ath9k_hw_common(ah); - BUG_ON(AR_SREV_9280_20_OR_LATER(ah)); + if (AR_SREV_9280_20_OR_LATER(ah)) + return 0; ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows); ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows); @@ -492,35 +491,12 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) return 0; #undef ATH_ALLOC_BANK +error: + ath_err(common, "Cannot allocate RF banks\n"); + return -ENOMEM; } -/** - * ar5008_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers - * @ah: atheros hardware struture - * For the external AR2133/AR5133 radios banks. - */ -static void ar5008_hw_rf_free_ext_banks(struct ath_hw *ah) -{ -#define ATH_FREE_BANK(bank) do { \ - kfree(bank); \ - bank = NULL; \ - } while (0); - - BUG_ON(AR_SREV_9280_20_OR_LATER(ah)); - - ATH_FREE_BANK(ah->analogBank0Data); - ATH_FREE_BANK(ah->analogBank1Data); - ATH_FREE_BANK(ah->analogBank2Data); - ATH_FREE_BANK(ah->analogBank3Data); - ATH_FREE_BANK(ah->analogBank6Data); - ATH_FREE_BANK(ah->analogBank6TPCData); - ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->bank6Temp); - -#undef ATH_FREE_BANK -} - /* * * ar5008_hw_set_rf_regs - programs rf registers based on EEPROM * @ah: atheros hardware structure @@ -1380,7 +1356,7 @@ static void ar5008_hw_set_radar_conf(struct ath_hw *ah) conf->radar_inband = 8; } -void ar5008_hw_attach_phy_ops(struct ath_hw *ah) +int ar5008_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); static const u32 ar5416_cca_regs[6] = { @@ -1391,12 +1367,15 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah) AR_PHY_CH1_EXT_CCA, AR_PHY_CH2_EXT_CCA }; + int ret; + + ret = ar5008_hw_rf_alloc_ext_banks(ah); + if (ret) + return ret; priv_ops->rf_set_freq = ar5008_hw_set_channel; priv_ops->spur_mitigate_freq = ar5008_hw_spur_mitigate; - priv_ops->rf_alloc_ext_banks = ar5008_hw_rf_alloc_ext_banks; - priv_ops->rf_free_ext_banks = ar5008_hw_rf_free_ext_banks; priv_ops->set_rf_regs = ar5008_hw_set_rf_regs; priv_ops->set_channel_regs = ar5008_hw_set_channel_regs; priv_ops->init_bb = ar5008_hw_init_bb; @@ -1421,4 +1400,5 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah) ar5008_hw_set_nf_limits(ah); ar5008_hw_set_radar_conf(ah); memcpy(ah->nf_regs, ar5416_cca_regs, sizeof(ah->nf_regs)); + return 0; } diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 648da3e..54da026 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -102,7 +102,7 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns; u32 *data; - data = kmalloc(size, GFP_KERNEL); + data = devm_kzalloc(ah->dev, size, GFP_KERNEL); if (!data) return; @@ -409,22 +409,27 @@ void ar9002_hw_enable_async_fifo(struct ath_hw *ah) } /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */ -void ar9002_hw_attach_ops(struct ath_hw *ah) +int ar9002_hw_attach_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); struct ath_hw_ops *ops = ath9k_hw_ops(ah); + int ret; priv_ops->init_mode_regs = ar9002_hw_init_mode_regs; priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs; ops->config_pci_powersave = ar9002_hw_configpcipowersave; - ar5008_hw_attach_phy_ops(ah); + ret = ar5008_hw_attach_phy_ops(ah); + if (ret) + return ret; + if (AR_SREV_9280_20_OR_LATER(ah)) ar9002_hw_attach_phy_ops(ah); ar9002_hw_attach_calib_ops(ah); ar9002_hw_attach_mac_ops(ah); + return 0; } void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 846dd79..8b11981 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -561,8 +561,6 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) struct ath_hw_ops *ops = ath9k_hw_ops(ah); priv_ops->set_rf_regs = NULL; - priv_ops->rf_alloc_ext_banks = NULL; - priv_ops->rf_free_ext_banks = NULL; priv_ops->rf_set_freq = ar9002_hw_set_channel; priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; priv_ops->olc_init = ar9002_olc_init; diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h index 0f2b97f..14b7011 100644 --- a/drivers/net/wireless/ath/ath9k/hw-ops.h +++ b/drivers/net/wireless/ath/ath9k/hw-ops.h @@ -101,22 +101,6 @@ static inline void ath9k_hw_spur_mitigate_freq(struct ath_hw *ah, ath9k_hw_private_ops(ah)->spur_mitigate_freq(ah, chan); } -static inline int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah) -{ - if (!ath9k_hw_private_ops(ah)->rf_alloc_ext_banks) - return 0; - - return ath9k_hw_private_ops(ah)->rf_alloc_ext_banks(ah); -} - -static inline void ath9k_hw_rf_free_ext_banks(struct ath_hw *ah) -{ - if (!ath9k_hw_private_ops(ah)->rf_free_ext_banks) - return; - - ath9k_hw_private_ops(ah)->rf_free_ext_banks(ah); -} - static inline bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, u16 modesIndex) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7cb7870..ecf1c08 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -554,14 +554,6 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah)); - ecode = ath9k_hw_rf_alloc_ext_banks(ah); - if (ecode) { - ath_err(ath9k_hw_common(ah), - "Failed allocating banks for external radio\n"); - ath9k_hw_rf_free_ext_banks(ah); - return ecode; - } - if (ah->config.enable_ani) { ath9k_hw_ani_setup(ah); ath9k_hw_ani_init(ah); @@ -570,12 +562,13 @@ static int ath9k_hw_post_init(struct ath_hw *ah) return 0; } -static void ath9k_hw_attach_ops(struct ath_hw *ah) +static int ath9k_hw_attach_ops(struct ath_hw *ah) { - if (AR_SREV_9300_20_OR_LATER(ah)) - ar9003_hw_attach_ops(ah); - else - ar9002_hw_attach_ops(ah); + if (!AR_SREV_9300_20_OR_LATER(ah)) + return ar9002_hw_attach_ops(ah); + + ar9003_hw_attach_ops(ah); + return 0; } /* Called for all hardware families */ @@ -611,7 +604,9 @@ static int __ath9k_hw_init(struct ath_hw *ah) ath9k_hw_init_defaults(ah); ath9k_hw_init_config(ah); - ath9k_hw_attach_ops(ah); + r = ath9k_hw_attach_ops(ah); + if (r) + return r; if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) { ath_err(common, "Couldn't wakeup chip\n"); @@ -1153,12 +1148,9 @@ void ath9k_hw_deinit(struct ath_hw *ah) struct ath_common *common = ath9k_hw_common(ah); if (common->state < ATH_HW_INITIALIZED) - goto free_hw; + return; ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); - -free_hw: - ath9k_hw_rf_free_ext_banks(ah); } EXPORT_SYMBOL(ath9k_hw_deinit); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7f1a8e9..d2b5229 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -604,8 +604,6 @@ struct ath_hw_radar_conf { * * @rf_set_freq: change frequency * @spur_mitigate_freq: spur mitigation - * @rf_alloc_ext_banks: - * @rf_free_ext_banks: * @set_rf_regs: * @compute_pll_control: compute the PLL control value to use for * AR_RTC_PLL_CONTROL for a given channel @@ -630,8 +628,6 @@ struct ath_hw_private_ops { struct ath9k_channel *chan); void (*spur_mitigate_freq)(struct ath_hw *ah, struct ath9k_channel *chan); - int (*rf_alloc_ext_banks)(struct ath_hw *ah); - void (*rf_free_ext_banks)(struct ath_hw *ah); bool (*set_rf_regs)(struct ath_hw *ah, struct ath9k_channel *chan, u16 modesIndex); @@ -710,6 +706,7 @@ enum ath_cal_list { struct ath_hw { struct ath_ops reg_ops; + struct device *dev; struct ieee80211_hw *hw; struct ath_common common; struct ath9k_hw_version hw_version; @@ -1068,14 +1065,14 @@ bool ar9003_paprd_is_done(struct ath_hw *ah); bool ar9003_is_paprd_enabled(struct ath_hw *ah); /* Hardware family op attach helpers */ -void ar5008_hw_attach_phy_ops(struct ath_hw *ah); +int ar5008_hw_attach_phy_ops(struct ath_hw *ah); void ar9002_hw_attach_phy_ops(struct ath_hw *ah); void ar9003_hw_attach_phy_ops(struct ath_hw *ah); void ar9002_hw_attach_calib_ops(struct ath_hw *ah); void ar9003_hw_attach_calib_ops(struct ath_hw *ah); -void ar9002_hw_attach_ops(struct ath_hw *ah); +int ar9002_hw_attach_ops(struct ath_hw *ah); void ar9003_hw_attach_ops(struct ath_hw *ah); void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 0f00a13..5c01f43 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -559,6 +559,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, if (!ah) return -ENOMEM; + ah->dev = sc->dev; ah->hw = sc->hw; ah->hw_version.devid = devid; ah->reg_ops.read = ath9k_ioread32; -- cgit v0.10.2 From d1f3de71a584a82ee4e84505fce9acccf40215ff Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 15 Dec 2012 23:18:06 +0100 Subject: carl9170: advertise support for TDLS Based on a quick test [ath9k and carl9170], TDLS seemed to be working fine. And while we are at it, let's move the wiphy feature flag set from carl9170_alloc into a single place in carl9170_fw. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index aaebecd..5a8a9f8 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -354,7 +354,11 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) ar->hw->wiphy->interface_modes |= if_comb_types; - ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + ar->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* As IBSS Encryption is software-based, IBSS RSN is supported. */ + ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | + WIPHY_FLAG_IBSS_RSN | WIPHY_FLAG_SUPPORTS_TDLS; #undef SUPPORTED return carl9170_fw_tx_sequence(ar); diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 9d2051a..ce8ae1e 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1807,10 +1807,6 @@ void *carl9170_alloc(size_t priv_size) for (i = 0; i < ARRAY_SIZE(ar->noise); i++) ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */ - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - /* As IBSS Encryption is software-based, IBSS RSN is supported. */ - hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; return ar; err_nomem: -- cgit v0.10.2 From 5ae994d0984ddc2f1e79c4f8de7189faecfc0af9 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 15 Dec 2012 23:21:32 +0100 Subject: carl9170: import 1.9.7 firmware headers Import new headers from my firmware branch: visit our wiki at: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/fwcmd.h b/drivers/net/wireless/ath/carl9170/fwcmd.h index 9443c80..9111d4f 100644 --- a/drivers/net/wireless/ath/carl9170/fwcmd.h +++ b/drivers/net/wireless/ath/carl9170/fwcmd.h @@ -156,6 +156,14 @@ struct carl9170_psm { } __packed; #define CARL9170_PSM_SIZE 4 +/* + * Note: If a bit in rx_filter is set, then it + * means that the particular frames which matches + * the condition are FILTERED/REMOVED/DISCARDED! + * (This is can be a bit confusing, especially + * because someone people think it's the exact + * opposite way, so watch out!) + */ struct carl9170_rx_filter_cmd { __le32 rx_filter; } __packed; diff --git a/drivers/net/wireless/ath/carl9170/hw.h b/drivers/net/wireless/ath/carl9170/hw.h index fa834c1..0db874a 100644 --- a/drivers/net/wireless/ath/carl9170/hw.h +++ b/drivers/net/wireless/ath/carl9170/hw.h @@ -384,7 +384,7 @@ #define AR9170_MAC_REG_BCN_ADDR (AR9170_MAC_REG_BASE + 0xd84) #define AR9170_MAC_REG_BCN_LENGTH (AR9170_MAC_REG_BASE + 0xd88) -#define AR9170_MAC_BCN_LENGTH_MAX 256 +#define AR9170_MAC_BCN_LENGTH_MAX (512 - 32) #define AR9170_MAC_REG_BCN_STATUS (AR9170_MAC_REG_BASE + 0xd8c) diff --git a/drivers/net/wireless/ath/carl9170/version.h b/drivers/net/wireless/ath/carl9170/version.h index 2ec3e91..2282847 100644 --- a/drivers/net/wireless/ath/carl9170/version.h +++ b/drivers/net/wireless/ath/carl9170/version.h @@ -1,7 +1,7 @@ #ifndef __CARL9170_SHARED_VERSION_H #define __CARL9170_SHARED_VERSION_H #define CARL9170FW_VERSION_YEAR 12 -#define CARL9170FW_VERSION_MONTH 7 -#define CARL9170FW_VERSION_DAY 7 -#define CARL9170FW_VERSION_GIT "1.9.6" +#define CARL9170FW_VERSION_MONTH 12 +#define CARL9170FW_VERSION_DAY 15 +#define CARL9170FW_VERSION_GIT "1.9.7" #endif /* __CARL9170_SHARED_VERSION_H */ -- cgit v0.10.2 From 7f878b0d96e6b3bd27d736fb2fb7e3cc94b16b26 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 16 Dec 2012 01:41:37 +0100 Subject: carl9170: allow P2P_GO interface creation after P2P_CLIENT Janusz Dziedzic reported that after a change in wpa_supplicant ["nl80211: Automatically use concurrent P2P if possible"], carl9170 was no longer able to host a P2P network. This patch tackles the problem by allowing GO interfaces to be registered, long after the P2P_CLIENT interface is brought up. Reported-by: Janusz Dziedzic Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index ce8ae1e..95e4bf0 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -580,7 +580,7 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct carl9170_vif_info *vif_priv = (void *) vif->drv_priv; - struct ieee80211_vif *main_vif; + struct ieee80211_vif *main_vif, *old_main = NULL; struct ar9170 *ar = hw->priv; int vif_id = -1, err = 0; @@ -602,6 +602,15 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, goto init; } + /* Because the AR9170 HW's MAC doesn't provide full support for + * multiple, independent interfaces [of different operation modes]. + * We have to select ONE main interface [main mode of HW], but we + * can have multiple slaves [AKA: entry in the ACK-table]. + * + * The first (from HEAD/TOP) interface in the ar->vif_list is + * always the main intf. All following intfs in this list + * are considered to be slave intfs. + */ main_vif = carl9170_get_main_vif(ar); if (main_vif) { @@ -610,6 +619,18 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, if (vif->type == NL80211_IFTYPE_STATION) break; + /* P2P GO [master] use-case + * Because the P2P GO station is selected dynamically + * by all participating peers of a WIFI Direct network, + * the driver has be able to change the main interface + * operating mode on the fly. + */ + if (main_vif->p2p && vif->p2p && + vif->type == NL80211_IFTYPE_AP) { + old_main = main_vif; + break; + } + err = -EBUSY; rcu_read_unlock(); @@ -648,14 +669,41 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, vif_priv->id = vif_id; vif_priv->enable_beacon = false; ar->vifs++; - list_add_tail_rcu(&vif_priv->list, &ar->vif_list); + if (old_main) { + /* We end up in here, if the main interface is being replaced. + * Put the new main interface at the HEAD of the list and the + * previous inteface will automatically become second in line. + */ + list_add_rcu(&vif_priv->list, &ar->vif_list); + } else { + /* Add new inteface. If the list is empty, it will become the + * main inteface, otherwise it will be slave. + */ + list_add_tail_rcu(&vif_priv->list, &ar->vif_list); + } rcu_assign_pointer(ar->vif_priv[vif_id].vif, vif); init: - if (carl9170_get_main_vif(ar) == vif) { + main_vif = carl9170_get_main_vif(ar); + + if (main_vif == vif) { rcu_assign_pointer(ar->beacon_iter, vif_priv); rcu_read_unlock(); + if (old_main) { + struct carl9170_vif_info *old_main_priv = + (void *) old_main->drv_priv; + /* downgrade old main intf to slave intf. + * NOTE: We are no longer under rcu_read_lock. + * But we are still holding ar->mutex, so the + * vif data [id, addr] is safe. + */ + err = carl9170_mod_virtual_mac(ar, old_main_priv->id, + old_main->addr); + if (err) + goto unlock; + } + err = carl9170_init_interface(ar, vif); if (err) goto unlock; -- cgit v0.10.2 From 17f658ac8c7e0af0c7aa12587477f9bbc093229e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Dec 2012 14:54:19 +0100 Subject: carl9170: Only specify interface combinations if more than one interface is possible Otherwise carl9170 triggers a warning in cfg80211, from net/wireless/core.c /* Combinations with just one interface aren't real */ if (WARN_ON(c->max_interfaces < 2)) Note: The number of supported interfaces is set by the carl9170 firmware. The default number of supported interfaces for all current firmwares is 2. Therefore this warning can only be observed with custom firmwares. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index 5a8a9f8..401a080 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -215,6 +215,24 @@ static int carl9170_fw_tx_sequence(struct ar9170 *ar) return 0; } +static void carl9170_fw_set_if_combinations(struct ar9170 *ar, + u16 if_comb_types) +{ + if (ar->fw.vif_num < 2) + return; + + ar->if_comb_limits[0].max = ar->fw.vif_num; + ar->if_comb_limits[0].types = if_comb_types; + + ar->if_combs[0].num_different_channels = 1; + ar->if_combs[0].max_interfaces = ar->fw.vif_num; + ar->if_combs[0].limits = ar->if_comb_limits; + ar->if_combs[0].n_limits = ARRAY_SIZE(ar->if_comb_limits); + + ar->hw->wiphy->iface_combinations = ar->if_combs; + ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ar->if_combs); +} + static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) { const struct carl9170fw_otus_desc *otus_desc; @@ -341,16 +359,7 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) } } - ar->if_comb_limits[0].max = ar->fw.vif_num; - ar->if_comb_limits[0].types = if_comb_types; - - ar->if_combs[0].num_different_channels = 1; - ar->if_combs[0].max_interfaces = ar->fw.vif_num; - ar->if_combs[0].limits = ar->if_comb_limits; - ar->if_combs[0].n_limits = ARRAY_SIZE(ar->if_comb_limits); - - ar->hw->wiphy->iface_combinations = ar->if_combs; - ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ar->if_combs); + carl9170_fw_set_if_combinations(ar, if_comb_types); ar->hw->wiphy->interface_modes |= if_comb_types; -- cgit v0.10.2 From 7a5c7307736cdc26146581aed24cc46a4c7e6f35 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Dec 2012 16:30:05 +0100 Subject: carl9170: don't enable hw crypto offload, if the fw doesn't support it Previously, op_start would set disable_offload always to false, even if it was set to true by the fw parser. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index 2df17f1..c77874c 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -290,6 +290,7 @@ struct ar9170 { unsigned int rx_size; unsigned int tx_seq_table; bool ba_filter; + bool disable_offload_fw; } fw; /* interface configuration combinations */ diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index 401a080..6e76179 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -282,7 +282,7 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) if (!SUPP(CARL9170FW_COMMAND_CAM)) { dev_info(&ar->udev->dev, "crypto offloading is disabled " "by firmware.\n"); - ar->disable_offload = true; + ar->fw.disable_offload_fw = true; } if (SUPP(CARL9170FW_PSM) && SUPP(CARL9170FW_FIXED_5GHZ_PSM)) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 95e4bf0..6ca5dd0 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -358,8 +358,13 @@ static int carl9170_op_start(struct ieee80211_hw *hw) ar->ps.last_action = jiffies; ar->ps.last_slept = jiffies; ar->erp_mode = CARL9170_ERP_AUTO; - ar->rx_software_decryption = false; - ar->disable_offload = false; + + /* Set "disable hw crypto offload" whenever the module parameter + * nohwcrypt is true or if the firmware does not support it. + */ + ar->disable_offload = modparam_nohwcrypt | + ar->fw.disable_offload_fw; + ar->rx_software_decryption = ar->disable_offload; for (i = 0; i < ar->hw->queues; i++) { ar->queue_stop_timeout[i] = jiffies; @@ -565,12 +570,20 @@ static int carl9170_init_interface(struct ar9170 *ar, memcpy(common->macaddr, vif->addr, ETH_ALEN); - if (modparam_nohwcrypt || - ((vif->type != NL80211_IFTYPE_STATION) && - (vif->type != NL80211_IFTYPE_AP))) { - ar->rx_software_decryption = true; - ar->disable_offload = true; - } + /* We have to fall back to software crypto, whenever + * the user choose to participates in an IBSS. HW + * offload for IBSS RSN is not supported by this driver. + * + * NOTE: If the previous main interface has already + * disabled hw crypto offload, we have to keep this + * previous disable_offload setting as it was. + * Altough ideally, we should notify mac80211 and tell + * it to forget about any HW crypto offload for now. + */ + ar->disable_offload |= ((vif->type != NL80211_IFTYPE_STATION) && + (vif->type != NL80211_IFTYPE_AP)); + + ar->rx_software_decryption = ar->disable_offload; err = carl9170_set_operating_mode(ar); return err; @@ -1160,9 +1173,7 @@ static int carl9170_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (ar->disable_offload || !vif) return -EOPNOTSUPP; - /* - * We have to fall back to software encryption, whenever - * the user choose to participates in an IBSS or is connected + /* Fall back to software encryption whenever the driver is connected * to more than one network. * * This is very unfortunate, because some machines cannot handle -- cgit v0.10.2 From 55fa645e3a3f4c0b5da744eb0e1fec4e51dfc75e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Dec 2012 17:05:55 +0100 Subject: carl9170: disable hw crypto for p2p networks While the driver supports HW offload in a single P2P client configuration, it doesn't support HW offload in the concurrent P2P GO+CLIENT configuration. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 6ca5dd0..0abf005 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -583,6 +583,14 @@ static int carl9170_init_interface(struct ar9170 *ar, ar->disable_offload |= ((vif->type != NL80211_IFTYPE_STATION) && (vif->type != NL80211_IFTYPE_AP)); + /* While the driver supports HW offload in a single + * P2P client configuration, it doesn't support HW + * offload in the favourit, concurrent P2P GO+CLIENT + * configuration. Hence, HW offload will always be + * disabled for P2P. + */ + ar->disable_offload |= vif->p2p; + ar->rx_software_decryption = ar->disable_offload; err = carl9170_set_operating_mode(ar); -- cgit v0.10.2 From 558925f3135731d67c5e65436ecff1a4b1c9450f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 20 Dec 2012 02:44:29 +0100 Subject: carl9170: remove custom NUM_TID and friends The commit: "mac80211: introduce IEEE80211_NUM_TIDS and use it" introduced a generic NUM_TID definitions for all everyone. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index c77874c..2559974 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -85,20 +85,14 @@ enum carl9170_device_state { CARL9170_STARTED, }; -#define CARL9170_NUM_TID 16 #define WME_BA_BMP_SIZE 64 #define CARL9170_TX_USER_RATE_TRIES 3 -#define WME_AC_BE 2 -#define WME_AC_BK 3 -#define WME_AC_VI 1 -#define WME_AC_VO 0 - #define TID_TO_WME_AC(_tid) \ - ((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \ - (((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK : \ - (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI : \ - WME_AC_VO) + ((((_tid) == 0) || ((_tid) == 3)) ? IEEE80211_AC_BE : \ + (((_tid) == 1) || ((_tid) == 2)) ? IEEE80211_AC_BK : \ + (((_tid) == 4) || ((_tid) == 5)) ? IEEE80211_AC_VI : \ + IEEE80211_AC_VO) #define SEQ_DIFF(_start, _seq) \ (((_start) - (_seq)) & 0x0fff) @@ -494,8 +488,8 @@ struct carl9170_sta_info { bool sleeping; atomic_t pending_frames; unsigned int ampdu_max_len; - struct carl9170_sta_tid __rcu *agg[CARL9170_NUM_TID]; - struct carl9170_ba_stats stats[CARL9170_NUM_TID]; + struct carl9170_sta_tid __rcu *agg[IEEE80211_NUM_TIDS]; + struct carl9170_ba_stats stats[IEEE80211_NUM_TIDS]; }; struct carl9170_tx_info { diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 0abf005..f22da26 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1330,7 +1330,7 @@ static int carl9170_op_sta_add(struct ieee80211_hw *hw, return 0; } - for (i = 0; i < CARL9170_NUM_TID; i++) + for (i = 0; i < ARRAY_SIZE(sta_info->agg); i++) RCU_INIT_POINTER(sta_info->agg[i], NULL); sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor); @@ -1354,7 +1354,7 @@ static int carl9170_op_sta_remove(struct ieee80211_hw *hw, sta_info->ht_sta = false; rcu_read_lock(); - for (i = 0; i < CARL9170_NUM_TID; i++) { + for (i = 0; i < ARRAY_SIZE(sta_info->agg); i++) { struct carl9170_sta_tid *tid_info; tid_info = rcu_dereference(sta_info->agg[i]); -- cgit v0.10.2 From 1f1d9654e183c31df4d168591165beed869ea098 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 22 Dec 2012 15:05:26 +0100 Subject: carl9170: refactor carl9170_update_beacon This patch moves parts of carl9170_update_beacon into separate subroutines, so the parts become more manageable. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index ef4ec0d..9c0b150 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1520,35 +1520,92 @@ void carl9170_tx_scheduler(struct ar9170 *ar) carl9170_tx(ar); } -int carl9170_update_beacon(struct ar9170 *ar, const bool submit) +/* caller has to take rcu_read_lock */ +static struct carl9170_vif_info *carl9170_pick_beaconing_vif(struct ar9170 *ar) { - struct sk_buff *skb = NULL; struct carl9170_vif_info *cvif; + int i = 1; + + /* The AR9170 hardware has no fancy beacon queue or some + * other scheduling mechanism. So, the driver has to make + * due by setting the two beacon timers (pretbtt and tbtt) + * once and then swapping the beacon address in the HW's + * register file each time the pretbtt fires. + */ + + cvif = rcu_dereference(ar->beacon_iter); + if (ar->vifs > 0 && cvif) { + do { + list_for_each_entry_continue_rcu(cvif, &ar->vif_list, + list) { + if (cvif->active && cvif->enable_beacon) + goto out; + } + } while (ar->beacon_enabled && i--); + } + +out: + rcu_assign_pointer(ar->beacon_iter, cvif); + return cvif; +} + +static bool carl9170_tx_beacon_physet(struct ar9170 *ar, struct sk_buff *skb, + u32 *ht1, u32 *plcp) +{ struct ieee80211_tx_info *txinfo; struct ieee80211_tx_rate *rate; - __le32 *data, *old = NULL; - unsigned int plcp, power, chains; - u32 word, ht1, off, addr, len; - int i = 0, err = 0; + unsigned int power, chains; + bool ht_rate; - rcu_read_lock(); - cvif = rcu_dereference(ar->beacon_iter); -retry: - if (ar->vifs == 0 || !cvif) - goto out_unlock; + txinfo = IEEE80211_SKB_CB(skb); + rate = &txinfo->control.rates[0]; + ht_rate = !!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS); + carl9170_tx_rate_tpc_chains(ar, txinfo, rate, plcp, &power, &chains); - list_for_each_entry_continue_rcu(cvif, &ar->vif_list, list) { - if (cvif->active && cvif->enable_beacon) - goto found; + *ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; + if (chains == AR9170_TX_PHY_TXCHAIN_2) + *ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; + SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, *ht1, 7); + SET_VAL(AR9170_MAC_BCN_HT1_TPC, *ht1, power); + SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, *ht1, chains); + + if (ht_rate) { + *ht1 |= AR9170_MAC_BCN_HT1_HT_EN; + if (rate->flags & IEEE80211_TX_RC_SHORT_GI) + *plcp |= AR9170_MAC_BCN_HT2_SGI; + + if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; + *plcp |= AR9170_MAC_BCN_HT2_BW40; + } else if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { + *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; + *plcp |= AR9170_MAC_BCN_HT2_BW40; + } + + SET_VAL(AR9170_MAC_BCN_HT2_LEN, *plcp, skb->len + FCS_LEN); + } else { + if (*plcp <= AR9170_TX_PHY_RATE_CCK_11M) + *plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; + else + *plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; } - if (!ar->beacon_enabled || i++) - goto out_unlock; + return ht_rate; +} - goto retry; +int carl9170_update_beacon(struct ar9170 *ar, const bool submit) +{ + struct sk_buff *skb = NULL; + struct carl9170_vif_info *cvif; + __le32 *data, *old = NULL; + u32 word, ht1, plcp, off, addr, len; + int i = 0, err = 0; + bool ht_rate; -found: - rcu_assign_pointer(ar->beacon_iter, cvif); + rcu_read_lock(); + cvif = carl9170_pick_beaconing_vif(ar); + if (!cvif) + goto out_unlock; skb = ieee80211_beacon_get_tim(ar->hw, carl9170_get_vif(cvif), NULL, NULL); @@ -1558,7 +1615,6 @@ found: goto err_free; } - txinfo = IEEE80211_SKB_CB(skb); spin_lock_bh(&ar->beacon_lock); data = (__le32 *)skb->data; if (cvif->beacon) @@ -1588,43 +1644,14 @@ found: goto err_unlock; } - ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; - rate = &txinfo->control.rates[0]; - carl9170_tx_rate_tpc_chains(ar, txinfo, rate, &plcp, &power, &chains); - if (!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { - if (plcp <= AR9170_TX_PHY_RATE_CCK_11M) - plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; - else - plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; - } else { - ht1 |= AR9170_MAC_BCN_HT1_HT_EN; - if (rate->flags & IEEE80211_TX_RC_SHORT_GI) - plcp |= AR9170_MAC_BCN_HT2_SGI; - - if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { - ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; - plcp |= AR9170_MAC_BCN_HT2_BW40; - } - if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { - ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; - plcp |= AR9170_MAC_BCN_HT2_BW40; - } - - SET_VAL(AR9170_MAC_BCN_HT2_LEN, plcp, skb->len + FCS_LEN); - } - - SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, ht1, 7); - SET_VAL(AR9170_MAC_BCN_HT1_TPC, ht1, power); - SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, ht1, chains); - if (chains == AR9170_TX_PHY_TXCHAIN_2) - ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; + ht_rate = carl9170_tx_beacon_physet(ar, skb, &ht1, &plcp); carl9170_async_regwrite_begin(ar); carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT1, ht1); - if (!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS)) - carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); - else + if (ht_rate) carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT2, plcp); + else + carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) { /* -- cgit v0.10.2 From 93476b1e685036e8513be8df34ca442096af6b4c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 17 Dec 2012 22:06:08 +0100 Subject: ath9k: fix column header comments for some initval arrays Some 3-column initval arrays have wrong comments. The column of these arrays is indexed by the 'freqIndex' variable in 'ar5008_hw_process_ini' which only depends on the actual band. The 'initvals' tool from 'qca-swiss-army-knife' prints the correct comment lines for these arrays, since commit 'atheros-initvals: fix comments for non-fastclock 3-column tables' however the comments were not refreshed in ath9k. The patch contains no functional changes. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar5008_initvals.h b/drivers/net/wireless/ath/ath9k/ar5008_initvals.h index f81e7fc..467ccfa 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar5008_initvals.h @@ -466,7 +466,7 @@ static const u32 ar5416Bank0[][2] = { }; static const u32 ar5416BB_RfGain[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x00009a00, 0x00000000, 0x00000000}, {0x00009a04, 0x00000040, 0x00000040}, {0x00009a08, 0x00000080, 0x00000080}, @@ -546,12 +546,12 @@ static const u32 ar5416Bank2[][2] = { }; static const u32 ar5416Bank3[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x000098f0, 0x01400018, 0x01c00018}, }; static const u32 ar5416Bank6[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, @@ -588,7 +588,7 @@ static const u32 ar5416Bank6[][3] = { }; static const u32 ar5416Bank6TPC[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9001_initvals.h b/drivers/net/wireless/ath/ath9k/ar9001_initvals.h index ea4a230..59524e1 100644 --- a/drivers/net/wireless/ath/ath9k/ar9001_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9001_initvals.h @@ -460,7 +460,7 @@ static const u32 ar5416Common_9100[][2] = { }; static const u32 ar5416Bank6_9100[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, @@ -497,7 +497,7 @@ static const u32 ar5416Bank6_9100[][3] = { }; static const u32 ar5416Bank6TPC_9100[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, -- cgit v0.10.2 From 70277f47b58b174a6b0b891dcd06ae5125afb73b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 20 Dec 2012 14:31:51 +0100 Subject: iwlegacy: add flush callback Dump implementation of flush, which just wait until all TX queues become empty. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index d604b40..962400a 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -3474,6 +3474,7 @@ struct ieee80211_ops il3945_mac_ops = { .sta_add = il3945_mac_sta_add, .sta_remove = il_mac_sta_remove, .tx_last_beacon = il_mac_tx_last_beacon, + .flush = il_mac_flush, }; static int diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 6a86ed4..c40020c 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6308,6 +6308,7 @@ const struct ieee80211_ops il4965_mac_ops = { .sta_remove = il_mac_sta_remove, .channel_switch = il4965_mac_channel_switch, .tx_last_beacon = il_mac_tx_last_beacon, + .flush = il_mac_flush, }; static int diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 7e16d10..56b8021 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -4707,6 +4707,42 @@ out: } EXPORT_SYMBOL(il_mac_change_interface); +void +il_mac_flush(struct ieee80211_hw *hw, bool drop) +{ + struct il_priv *il = hw->priv; + unsigned long timeout = jiffies + msecs_to_jiffies(500); + int i; + + mutex_lock(&il->mutex); + D_MAC80211("enter\n"); + + if (il->txq == NULL) + goto out; + + for (i = 0; i < il->hw_params.max_txq_num; i++) { + struct il_queue *q; + + if (i == il->cmd_queue) + continue; + + q = &il->txq[i].q; + if (q->read_ptr == q->write_ptr) + continue; + + if (time_after(jiffies, timeout)) { + IL_ERR("Failed to flush queue %d\n", q->id); + break; + } + + msleep(20); + } +out: + D_MAC80211("leave\n"); + mutex_unlock(&il->mutex); +} +EXPORT_SYMBOL(il_mac_flush); + /* * On every watchdog tick we check (latest) time stamp. If it does not * change during timeout period and queue is not empty we reset firmware. diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index a9a569f..37fe553 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -1723,6 +1723,7 @@ void il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum nl80211_iftype newtype, bool newp2p); +void il_mac_flush(struct ieee80211_hw *hw, bool drop); int il_alloc_txq_mem(struct il_priv *il); void il_free_txq_mem(struct il_priv *il); -- cgit v0.10.2 From 07db8f8fe9889a2db44d7692e5514a41d20e32c6 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 20 Dec 2012 14:31:53 +0100 Subject: iwlegacy: allow to enable PS Power save support was removed from iwlegacy due to possible firmware crashes problems it cause. I use to plan first inspect code to find reason of problems, fix them and then allow to enable PS. But realistically - code inspection will not happen, so let's do it, and wait for eventual bug reports. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 962400a..3d76a3f 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -3549,7 +3549,8 @@ il3945_setup_mac(struct il_priv *il) hw->vif_data_size = sizeof(struct il_vif_priv); /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT; + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT | + IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); @@ -3558,6 +3559,8 @@ il3945_setup_mac(struct il_priv *il) WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS | WIPHY_FLAG_IBSS_RSN; + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; /* we create the 802.11 header and a zero-length SSID element */ hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2; diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index c40020c..10fc249 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5712,8 +5712,8 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_NEED_DTIM_PERIOD | IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; - + IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | -- cgit v0.10.2 From c2397bb0c55495d8474c36143fdaced5c435a5e4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 22 Dec 2012 22:07:14 +0100 Subject: brcmsmac: initialize morepending in brcms_b_recv() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/net/wireless/brcm80211/brcmsmac/main.c: In function ‘brcms_b_recv’: drivers/net/wireless/brcm80211/brcmsmac/main.c:7636: warning: ‘morepending’ may be used uninitialized in this function Signed-off-by: Geert Uytterhoeven Acked-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 17594de..5f0f444f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7633,7 +7633,7 @@ brcms_b_recv(struct brcms_hardware *wlc_hw, uint fifo, bool bound) uint n = 0; uint bound_limit = bound ? RXBND : -1; - bool morepending; + bool morepending = false; skb_queue_head_init(&recv_frames); -- cgit v0.10.2 From e1b97c9bc5902ec8b36247bcb7c3552895611485 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 26 Dec 2012 12:27:38 +0530 Subject: ath9k_hw: Remove AR9485 1.0 macro Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index ad3c82c..0ac205e 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -884,9 +884,6 @@ #define AR_SREV_9485(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485)) -#define AR_SREV_9485_10(_ah) \ - (AR_SREV_9485(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_10)) #define AR_SREV_9485_11(_ah) \ (AR_SREV_9485(_ah) && \ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_11)) -- cgit v0.10.2 From a02308e931ad0bba19803779bec491c4b2d67b47 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 29 Dec 2012 14:51:51 +0100 Subject: rt2x00: rt2800: convert read_eeprom functions to return an int value Both the rtt2x00usb_eeprom_read and the ioremap functions are allowed to fail, however their return values are not checked in the read_eeprom functions in the rt2800{pci,usb} drivers. The patch adds the missing checks, and converts all read_eeprom functions to return an int value, so the error values can be propagated up to the 'rt2800_validate_eeprom' function. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 0ece353..f139a91 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4671,12 +4671,14 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) mutex_unlock(&rt2x00dev->csr_mutex); } -void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { unsigned int i; for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) rt2800_efuse_read(rt2x00dev, i); + + return 0; } EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); @@ -4686,11 +4688,14 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) u16 word; u8 *mac; u8 default_lna_gain; + int retval; /* * Read the EEPROM. */ - rt2800_read_eeprom(rt2x00dev); + retval = rt2800_read_eeprom(rt2x00dev); + if (retval) + return retval; /* * Start validation of the data that has been read. diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index a128cea..6ec7394 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -43,7 +43,7 @@ struct rt2800_ops { const unsigned int offset, const struct rt2x00_field32 field, u32 *reg); - void (*read_eeprom)(struct rt2x00_dev *rt2x00dev); + int (*read_eeprom)(struct rt2x00_dev *rt2x00dev); bool (*hwcrypt_disabled)(struct rt2x00_dev *rt2x00dev); int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev, @@ -117,11 +117,11 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev, return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg); } -static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev) +static inline int rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev) { const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - rt2800ops->read_eeprom(rt2x00dev); + return rt2800ops->read_eeprom(rt2x00dev); } static inline bool rt2800_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) @@ -207,7 +207,7 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev); void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); -void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); +int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 9224d87..0e8d170 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -90,17 +90,22 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) } #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) -static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); + if (!base_addr) + return -ENOMEM; + memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); iounmap(base_addr); + return 0; } #else -static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { + return -ENOMEM; } #endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */ @@ -135,7 +140,7 @@ static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); } -static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +static int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) { struct eeprom_93cx6 eeprom; u32 reg; @@ -164,6 +169,8 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, EEPROM_SIZE / sizeof(u16)); + + return 0; } static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) @@ -171,13 +178,14 @@ static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) return rt2800_efuse_detect(rt2x00dev); } -static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { - rt2800_read_eeprom_efuse(rt2x00dev); + return rt2800_read_eeprom_efuse(rt2x00dev); } #else -static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) { + return -EOPNOTSUPP; } static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) @@ -185,8 +193,9 @@ static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) return 0; } -static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { + return -EOPNOTSUPP; } #endif /* CONFIG_PCI */ @@ -970,14 +979,18 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) /* * Device probe functions. */ -static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) { + int retval; + if (rt2x00_is_soc(rt2x00dev)) - rt2800pci_read_eeprom_soc(rt2x00dev); + retval = rt2800pci_read_eeprom_soc(rt2x00dev); else if (rt2800pci_efuse_detect(rt2x00dev)) - rt2800pci_read_eeprom_efuse(rt2x00dev); + retval = rt2800pci_read_eeprom_efuse(rt2x00dev); else - rt2800pci_read_eeprom_pci(rt2x00dev); + retval = rt2800pci_read_eeprom_pci(rt2x00dev); + + return retval; } static const struct ieee80211_ops rt2800pci_mac80211_ops = { diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5c149b5..4721cad 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -735,13 +735,17 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, /* * Device probe functions. */ -static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) { + int retval; + if (rt2800_efuse_detect(rt2x00dev)) - rt2800_read_eeprom_efuse(rt2x00dev); + retval = rt2800_read_eeprom_efuse(rt2x00dev); else - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, - EEPROM_SIZE); + retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, + EEPROM_SIZE); + + return retval; } static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) -- cgit v0.10.2 From 01486c5ad388c8a38f2e075666e8c2ee32bda4b6 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Wed, 2 Jan 2013 15:22:34 +0100 Subject: brcmsmac: increase timer reference count for new timers only On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index f0fc8cd..f8e2591 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1409,9 +1409,10 @@ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) #endif t->ms = ms; t->periodic = (bool) periodic; - t->set = true; - - atomic_inc(&t->wl->callbacks); + if (!t->set) { + t->set = true; + atomic_inc(&t->wl->callbacks); + } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } -- cgit v0.10.2 From 66578c0a8cb8c34ef284acf34e05f2d8e7416ee1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:35 +0100 Subject: brcmsmac: use perimeter lock in add_interface() callback All callbacks that access driver functions should do that under perimeter lock protection. The add_interface() callback was lacking this lock. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index f8e2591..b5b4487 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -362,8 +362,10 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) return -EOPNOTSUPP; } + spin_lock_bh(&wl->lock); wl->mute_tx = false; brcms_c_mute(wl->wlc, false); + spin_unlock_bh(&wl->lock); return 0; } -- cgit v0.10.2 From b180b10056e204fa1f65f0494215d73eb8253c87 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:36 +0100 Subject: brcmsmac: allow user-space setting of interface address The interface address of the wireless device is determined by the permanent address stored in the device. This patch allows it to be overridden from user-space. Reported-by: Maximilian Engelhardt Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index b5b4487..7fc49ca 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -363,6 +363,7 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) } spin_lock_bh(&wl->lock); + memcpy(wl->pub->cur_etheraddr, vif->addr, sizeof(vif->addr)); wl->mute_tx = false; brcms_c_mute(wl->wlc, false); spin_unlock_bh(&wl->lock); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 5f0f444f..c26992a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -2473,6 +2473,7 @@ static void brcms_b_tx_fifo_resume(struct brcms_hardware *wlc_hw, static void brcms_b_mute(struct brcms_hardware *wlc_hw, bool mute_tx) { static const u8 null_ether_addr[ETH_ALEN] = {0, 0, 0, 0, 0, 0}; + u8 *ethaddr = wlc_hw->wlc->pub->cur_etheraddr; if (mute_tx) { /* suspend tx fifos */ @@ -2482,8 +2483,7 @@ static void brcms_b_mute(struct brcms_hardware *wlc_hw, bool mute_tx) brcms_b_tx_fifo_suspend(wlc_hw, TX_AC_VI_FIFO); /* zero the address match register so we do not send ACKs */ - brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, - null_ether_addr); + brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, null_ether_addr); } else { /* resume tx fifos */ brcms_b_tx_fifo_resume(wlc_hw, TX_DATA_FIFO); @@ -2492,8 +2492,7 @@ static void brcms_b_mute(struct brcms_hardware *wlc_hw, bool mute_tx) brcms_b_tx_fifo_resume(wlc_hw, TX_AC_VI_FIFO); /* Restore address */ - brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, - wlc_hw->etheraddr); + brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, ethaddr); } wlc_phy_mute_upd(wlc_hw->band->pi, mute_tx, 0); -- cgit v0.10.2 From 637ccc27f46f2232267e689b6f8eb744f78f4810 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Wed, 2 Jan 2013 15:22:37 +0100 Subject: brcmsmac: remove dead code Dead code after AMPDU restructure. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 1de94f3..1585cc5 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -961,7 +961,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, /* if acked then clear bit and free packet */ if ((bindex < AMPDU_TX_BA_MAX_WSIZE) && isset(bitmap, bindex)) { - ini->tx_in_transit--; ini->txretry[index] = 0; /* @@ -990,7 +989,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, if (retry && (ini->txretry[index] < (int)retry_limit)) { int ret; ini->txretry[index]++; - ini->tx_in_transit--; ret = brcms_c_txfifo(wlc, queue, p); /* * We shouldn't be out of space in the DMA @@ -1000,7 +998,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, WARN_ONCE(ret, "queue %d out of txds\n", queue); } else { /* Retry timeout */ - ini->tx_in_transit--; ieee80211_tx_info_clear_status(tx_info); tx_info->status.ampdu_ack_len = 0; tx_info->status.ampdu_len = 1; @@ -1009,8 +1006,8 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, skb_pull(p, D11_PHY_HDR_LEN); skb_pull(p, D11_TXH_LEN); brcms_dbg_ht(wlc->hw->d11core, - "BA Timeout, seq %d, in_transit %d\n", - seq, ini->tx_in_transit); + "BA Timeout, seq %d\n", + seq); ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p); } diff --git a/drivers/net/wireless/brcm80211/brcmsmac/scb.h b/drivers/net/wireless/brcm80211/brcmsmac/scb.h index 51c79c7..3a3d736 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/scb.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/scb.h @@ -36,7 +36,6 @@ /* structure to store per-tid state for the ampdu initiator */ struct scb_ampdu_tid_ini { - u8 tx_in_transit; /* number of pending mpdus in transit in driver */ u8 tid; /* initiator tid for easy lookup */ /* tx retry count; indexed by seq modulo */ u8 txretry[AMPDU_TX_BA_MAX_WSIZE]; -- cgit v0.10.2 From 0429a6fa6be9489bf451e9fcc0f97341e4a356b6 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:38 +0100 Subject: brcmfmac: do not reconfigure refill rx on 0-length packet. When USB device gets removed rx complete comes with 0-length packets. Do not refill those packets. In some rare cases it can cause infinite loop. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 914c56f..22eae57 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -467,7 +467,11 @@ static void brcmf_usb_rx_complete(struct urb *urb) devinfo->bus_pub.bus->dstats.rx_errors++; } else brcmf_rx_packet(devinfo->dev, ifidx, skb); - brcmf_usb_rx_refill(devinfo, req); + /* zero lenght packets indicate usb "failure". Do not refill */ + if (urb->actual_length) + brcmf_usb_rx_refill(devinfo, req); + else + brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); } else { brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); -- cgit v0.10.2 From ac744395ba0a0491f8524a8371ad6f7df67bf673 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:39 +0100 Subject: brcmfmac: removed deprecated set_bitrate_mask support Set bitrate_mask is not desired anymore. The firmware will determine the correct rates to be used. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 1261a9b..ee4eb44 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2011,67 +2011,6 @@ done: return err; } -static s32 -brcmf_cfg80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *ndev, - const u8 *addr, - const struct cfg80211_bitrate_mask *mask) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcm_rateset_le rateset_le; - s32 rate; - s32 val; - s32 err_bg; - s32 err_a; - u32 legacy; - s32 err = 0; - - brcmf_dbg(TRACE, "Enter\n"); - if (!check_vif_up(ifp->vif)) - return -EIO; - - /* addr param is always NULL. ignore it */ - /* Get current rateset */ - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CURR_RATESET, - &rateset_le, sizeof(rateset_le)); - if (err) { - brcmf_err("could not get current rateset (%d)\n", err); - goto done; - } - - legacy = ffs(mask->control[IEEE80211_BAND_2GHZ].legacy & 0xFFFF); - if (!legacy) - legacy = ffs(mask->control[IEEE80211_BAND_5GHZ].legacy & - 0xFFFF); - - val = wl_g_rates[legacy - 1].bitrate * 100000; - - if (val < le32_to_cpu(rateset_le.count)) - /* Select rate by rateset index */ - rate = rateset_le.rates[val] & 0x7f; - else - /* Specified rate in bps */ - rate = val / 500000; - - brcmf_dbg(CONN, "rate %d mbps\n", rate / 2); - - /* - * - * Set rate override, - * Since the is a/b/g-blind, both a/bg_rate are enforced. - */ - err_bg = brcmf_fil_iovar_int_set(ifp, "bg_rate", rate); - err_a = brcmf_fil_iovar_int_set(ifp, "a_rate", rate); - if (err_bg && err_a) { - brcmf_err("could not set fixed rate (%d) (%d)\n", err_bg, - err_a); - err = err_bg | err_a; - } - -done: - brcmf_dbg(TRACE, "Exit\n"); - return err; -} - static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg, struct brcmf_bss_info_le *bi) { @@ -3703,7 +3642,6 @@ static struct cfg80211_ops wl_cfg80211_ops = { .set_default_key = brcmf_cfg80211_config_default_key, .set_default_mgmt_key = brcmf_cfg80211_config_default_mgmt_key, .set_power_mgmt = brcmf_cfg80211_set_power_mgmt, - .set_bitrate_mask = brcmf_cfg80211_set_bitrate_mask, .connect = brcmf_cfg80211_connect, .disconnect = brcmf_cfg80211_disconnect, .suspend = brcmf_cfg80211_suspend, -- cgit v0.10.2 From 81d5f1bbc47961b2347d2b92b2aec56e6bad8779 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:40 +0100 Subject: brcmfmac: assure USB dongle firmware is reset upon module unload Upon unloading the brcmfmac module the USB firmware should be reset as the device remains powered. The reset assures a known device state when a new brcmfmac driver load is being done. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index fd672bf..7245b17 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -39,6 +39,7 @@ #define BRCMF_C_GET_BSSID 23 #define BRCMF_C_GET_SSID 25 #define BRCMF_C_SET_SSID 26 +#define BRCMF_C_TERMINATED 28 #define BRCMF_C_GET_CHANNEL 29 #define BRCMF_C_SET_CHANNEL 30 #define BRCMF_C_GET_SRL 31 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index dd38b78..358b54f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -154,7 +154,8 @@ static inline void brcmf_rx_packet(struct device *dev, int ifidx, extern int brcmf_attach(uint bus_hdrlen, struct device *dev); /* Indication from bus module regarding removal/absence of dongle */ extern void brcmf_detach(struct device *dev); - +/* Indication from bus module that dongle should be reset */ +extern void brcmf_dev_reset(struct device *dev); /* Indication from bus module to change flow-control state */ extern void brcmf_txflowblock(struct device *dev, bool state); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 74a616b..16efcb4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -845,6 +845,17 @@ static void brcmf_bus_detach(struct brcmf_pub *drvr) } } +void brcmf_dev_reset(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_pub *drvr = bus_if->drvr; + + if (drvr == NULL) + return; + + brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); +} + void brcmf_detach(struct device *dev) { int i; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 22eae57..1df8595 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1524,10 +1524,23 @@ static void brcmf_release_fw(struct list_head *q) } } +static int brcmf_usb_reset_device(struct device *dev, void *notused) +{ + /* device past is the usb interface so we + * need to use parent here. + */ + brcmf_dev_reset(dev->parent); + return 0; +} void brcmf_usb_exit(void) { + struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver; + int ret; + brcmf_dbg(USB, "Enter\n"); + ret = driver_for_each_device(drv, NULL, NULL, + brcmf_usb_reset_device); usb_deregister(&brcmf_usbdrvr); brcmf_release_fw(&fw_image_list); } -- cgit v0.10.2 From 79d7c4e8da4ac3cfa98e8e622a17baaeb3c9d29d Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 21:20:10 +0100 Subject: brcmfmac: define pr_fmt in one place Several source files (but not all) define the pr_fmt() macro in exactly the same way. Instead this commit defines it in a header file so driver logging is consistent. Cc: Joe Perches Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index be35a2f..11fd1c7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -15,8 +15,6 @@ */ /* ****************** SDIO CARD Interface Functions **************************/ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index d33e559..d92d373 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index 8392355..0c83998 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -19,8 +19,6 @@ * For certain dcmd codes, the dongle interprets string data from the host. ******************************************************************************/ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index f8b52e5..4544342 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index f2ab01c..ea3f5f5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -34,6 +34,10 @@ #define BRCMF_SCAN_VAL 0x4000 #define BRCMF_CONN_VAL 0x8000 +/* set default print format */ +#undef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* Macro for error messages. net_ratelimit() is used when driver * debugging is not selected. When debugging the driver error * messages are as important as other tracing or even more so. diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 16efcb4..6520b58 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index cf857f1..651474b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index b1bb46c..14be2d5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -15,8 +15,6 @@ */ /* ***** SDIO interface chip backplane handle functions ***** */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index ee4eb44..1ec2d57 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -16,8 +16,6 @@ /* Toplevel file. Relies on dhd_linux.c to send commands to the dongle. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include -- cgit v0.10.2 From 3aa7aad2b2da32dd897900ab3eb62348a54d2dc1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:42 +0100 Subject: brcmfmac: remove rx helper function from bus interface The bus interface provided a wrapper function to pass a single packet to the common driver part filling a skb queue with one packet. For clarity the caller now sets up the skb queue and call the rx bus interface function. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 358b54f..639bc2a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -138,17 +138,8 @@ extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, int prec); /* Receive frame for delivery to OS. Callee disposes of rxp. */ -extern void brcmf_rx_frame(struct device *dev, u8 ifidx, - struct sk_buff_head *rxlist); -static inline void brcmf_rx_packet(struct device *dev, int ifidx, - struct sk_buff *pkt) -{ - struct sk_buff_head q; - - skb_queue_head_init(&q); - skb_queue_tail(&q, pkt); - brcmf_rx_frame(dev, ifidx, &q); -} +extern void brcmf_rx_frames(struct device *dev, u8 ifidx, + struct sk_buff_head *rxlist); /* Indication from bus module regarding presence/insertion of dongle. */ extern int brcmf_attach(uint bus_hdrlen, struct device *dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 6520b58..a820f58 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -248,8 +248,8 @@ void brcmf_txflowblock(struct device *dev, bool state) } } -void brcmf_rx_frame(struct device *dev, u8 ifidx, - struct sk_buff_head *skb_list) +void brcmf_rx_frames(struct device *dev, u8 ifidx, + struct sk_buff_head *skb_list) { unsigned char *eth; uint len; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 651474b..13ea9b4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1405,7 +1405,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* sent any remaining packets up */ if (bus->glom.qlen) - brcmf_rx_frame(bus->sdiodev->dev, ifidx, &bus->glom); + brcmf_rx_frames(bus->sdiodev->dev, ifidx, &bus->glom); bus->sdcnt.rxglomframes++; bus->sdcnt.rxglompkts += bus->glom.qlen; @@ -1556,6 +1556,7 @@ static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; /* Packet for event or data frames */ + struct sk_buff_head pktlist; /* needed for bus interface */ u16 pad; /* Number of pad bytes to read */ uint rxleft = 0; /* Remaining number of frames allowed */ int sdret; /* Return code from calls */ @@ -1766,7 +1767,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) continue; } - brcmf_rx_packet(bus->sdiodev->dev, ifidx, pkt); + skb_queue_head_init(&pktlist); + skb_queue_tail(&pktlist, pkt); + brcmf_rx_frames(bus->sdiodev->dev, ifidx, &pktlist); } rxcount = maxframes - rxleft; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 1df8595..34342ff 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -443,6 +443,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context; struct brcmf_usbdev_info *devinfo = req->devinfo; struct sk_buff *skb; + struct sk_buff_head skbq; int ifidx = 0; brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status); @@ -460,13 +461,15 @@ static void brcmf_usb_rx_complete(struct urb *urb) } if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) { + skb_queue_head_init(&skbq); + skb_queue_tail(&skbq, skb); skb_put(skb, urb->actual_length); if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) { brcmf_err("rx protocol error\n"); brcmu_pkt_buf_free_skb(skb); devinfo->bus_pub.bus->dstats.rx_errors++; } else - brcmf_rx_packet(devinfo->dev, ifidx, skb); + brcmf_rx_frames(devinfo->dev, ifidx, &skbq); /* zero lenght packets indicate usb "failure". Do not refill */ if (urb->actual_length) brcmf_usb_rx_refill(devinfo, req); -- cgit v0.10.2 From a43af515f6252e62604a1bfc139d43fa43ef5b6f Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:43 +0100 Subject: brcmfmac: remove brcmf_proto_hdrpull() from bus interface The use of the function brcmf_proto_hdrpull() is moved to the common part of the driver and consequently it can be removed from the bus interface. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 7245b17..4937bf4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -577,6 +577,10 @@ extern int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, uint len); +/* Remove any protocol-specific data header. */ +extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, + struct sk_buff *rxp); + extern int brcmf_net_attach(struct brcmf_if *ifp); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, char *name, u8 *mac_addr); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 639bc2a..64c38f4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -130,16 +130,11 @@ int brcmf_bus_rxctl(struct brcmf_bus *bus, unsigned char *msg, uint len) * interface functions from common layer */ -/* Remove any protocol-specific data header. */ -extern int brcmf_proto_hdrpull(struct device *dev, int *ifidx, - struct sk_buff *rxp); - extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, int prec); /* Receive frame for delivery to OS. Callee disposes of rxp. */ -extern void brcmf_rx_frames(struct device *dev, u8 ifidx, - struct sk_buff_head *rxlist); +extern void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist); /* Indication from bus module regarding presence/insertion of dongle. */ extern int brcmf_attach(uint bus_hdrlen, struct device *dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index 0c83998..aa37f3e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -303,12 +303,10 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, BDC_SET_IF_IDX(h, ifidx); } -int brcmf_proto_hdrpull(struct device *dev, int *ifidx, +int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, struct sk_buff *pktbuf) { struct brcmf_proto_bdc_header *h; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; brcmf_dbg(TRACE, "Enter\n"); @@ -346,6 +344,8 @@ int brcmf_proto_hdrpull(struct device *dev, int *ifidx, skb_pull(pktbuf, BDC_HEADER_LEN); skb_pull(pktbuf, h->data_offset << 2); + if (pktbuf->len == 0) + return -ENODATA; return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index a820f58..682cb02 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -248,8 +248,7 @@ void brcmf_txflowblock(struct device *dev, bool state) } } -void brcmf_rx_frames(struct device *dev, u8 ifidx, - struct sk_buff_head *skb_list) +void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) { unsigned char *eth; uint len; @@ -257,12 +256,24 @@ void brcmf_rx_frames(struct device *dev, u8 ifidx, struct brcmf_if *ifp; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; + u8 ifidx; + int ret; brcmf_dbg(TRACE, "Enter\n"); skb_queue_walk_safe(skb_list, skb, pnext) { skb_unlink(skb, skb_list); + /* process and remove protocol-specific header + */ + ret = brcmf_proto_hdrpull(drvr, &ifidx, skb); + if (ret < 0) { + if (ret != -ENODATA) + bus_if->dstats.rx_errors++; + brcmu_pkt_buf_free_skb(skb); + continue; + } + /* Get the protocol, maintain skb around eth_type_trans() * The main reason for this hack is for the limitation of * Linux 2.4 where 'eth_type_trans' uses the @@ -326,13 +337,13 @@ void brcmf_rx_frames(struct device *dev, u8 ifidx, void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) { - uint ifidx; + u8 ifidx; struct ethhdr *eh; u16 type; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; - brcmf_proto_hdrpull(dev, &ifidx, txp); + brcmf_proto_hdrpull(drvr, &ifidx, txp); eh = (struct ethhdr *)(txp->data); type = ntohs(eh->h_proto); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 13ea9b4..7fef9b5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1167,7 +1167,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) int errcode; u8 doff, sfdoff; - int ifidx = 0; bool usechain = bus->use_rxchain; struct brcmf_sdio_read rd_new; @@ -1386,13 +1385,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) skb_unlink(pfirst, &bus->glom); brcmu_pkt_buf_free_skb(pfirst); continue; - } else if (brcmf_proto_hdrpull(bus->sdiodev->dev, - &ifidx, pfirst) != 0) { - brcmf_err("rx protocol error\n"); - bus->sdiodev->bus_if->dstats.rx_errors++; - skb_unlink(pfirst, &bus->glom); - brcmu_pkt_buf_free_skb(pfirst); - continue; } brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), @@ -1405,7 +1397,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* sent any remaining packets up */ if (bus->glom.qlen) - brcmf_rx_frames(bus->sdiodev->dev, ifidx, &bus->glom); + brcmf_rx_frames(bus->sdiodev->dev, &bus->glom); bus->sdcnt.rxglomframes++; bus->sdcnt.rxglompkts += bus->glom.qlen; @@ -1560,7 +1552,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) u16 pad; /* Number of pad bytes to read */ uint rxleft = 0; /* Remaining number of frames allowed */ int sdret; /* Return code from calls */ - int ifidx = 0; uint rxcount = 0; /* Total frames read */ struct brcmf_sdio_read *rd = &bus->cur_read, rd_new; u8 head_read = 0; @@ -1759,17 +1750,11 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) if (pkt->len == 0) { brcmu_pkt_buf_free_skb(pkt); continue; - } else if (brcmf_proto_hdrpull(bus->sdiodev->dev, &ifidx, - pkt) != 0) { - brcmf_err("rx protocol error\n"); - brcmu_pkt_buf_free_skb(pkt); - bus->sdiodev->bus_if->dstats.rx_errors++; - continue; } skb_queue_head_init(&pktlist); skb_queue_tail(&pktlist, pkt); - brcmf_rx_frames(bus->sdiodev->dev, ifidx, &pktlist); + brcmf_rx_frames(bus->sdiodev->dev, &pktlist); } rxcount = maxframes - rxleft; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 34342ff..e15630c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -444,14 +444,14 @@ static void brcmf_usb_rx_complete(struct urb *urb) struct brcmf_usbdev_info *devinfo = req->devinfo; struct sk_buff *skb; struct sk_buff_head skbq; - int ifidx = 0; brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status); brcmf_usb_del_fromq(devinfo, req); skb = req->skb; req->skb = NULL; - if (urb->status == 0) { + /* zero lenght packets indicate usb "failure". Do not refill */ + if (urb->status == 0 && urb->actual_length) { devinfo->bus_pub.bus->dstats.rx_packets++; } else { devinfo->bus_pub.bus->dstats.rx_errors++; @@ -464,17 +464,8 @@ static void brcmf_usb_rx_complete(struct urb *urb) skb_queue_head_init(&skbq); skb_queue_tail(&skbq, skb); skb_put(skb, urb->actual_length); - if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) { - brcmf_err("rx protocol error\n"); - brcmu_pkt_buf_free_skb(skb); - devinfo->bus_pub.bus->dstats.rx_errors++; - } else - brcmf_rx_frames(devinfo->dev, ifidx, &skbq); - /* zero lenght packets indicate usb "failure". Do not refill */ - if (urb->actual_length) - brcmf_usb_rx_refill(devinfo, req); - else - brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); + brcmf_rx_frames(devinfo->dev, &skbq); + brcmf_usb_rx_refill(devinfo, req); } else { brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); -- cgit v0.10.2 From a6cfb1477d23aa251a1a4b0285fb385d94cdde51 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:44 +0100 Subject: brcmfmac: Use dedicated trace level for CDC. CDC debug is partly done with TRACE and partly with CTL, however CDC hardly ever needs debugging. Use dedicated level CDC and replace TRACE and CTL in dhd_cdc with that. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index aa37f3e..db3bc2e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -105,7 +105,7 @@ static int brcmf_proto_cdc_msg(struct brcmf_pub *drvr) int len = le32_to_cpu(prot->msg.len) + sizeof(struct brcmf_proto_cdc_dcmd); - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); /* NOTE : cdc->msg.len holds the desired length of the buffer to be * returned. Only up to CDC_MAX_MSG_SIZE of this buffer area @@ -123,7 +123,7 @@ static int brcmf_proto_cdc_cmplt(struct brcmf_pub *drvr, u32 id, u32 len) int ret; struct brcmf_proto *prot = drvr->prot; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); len += sizeof(struct brcmf_proto_cdc_dcmd); do { ret = brcmf_bus_rxctl(drvr->bus_if, (unsigned char *)&prot->msg, @@ -145,8 +145,7 @@ brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, int ret = 0, retries = 0; u32 id, flags; - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(CTL, "cmd %d len %d\n", cmd, len); + brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); /* Respond "bcmerror" and "bcmerrorstr" with local cache */ if (cmd == BRCMF_C_GET_VAR && buf) { @@ -226,8 +225,7 @@ int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, int ret = 0; u32 flags, id; - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(CTL, "cmd %d len %d\n", cmd, len); + brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); memset(msg, 0, sizeof(struct brcmf_proto_cdc_dcmd)); @@ -285,7 +283,7 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, { struct brcmf_proto_bdc_header *h; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); /* Push BDC header used to convey priority for buses that don't */ @@ -308,7 +306,7 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, { struct brcmf_proto_bdc_header *h; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); /* Pop BDC header used to convey priority for buses that don't */ @@ -334,7 +332,7 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, } if (h->flags & BDC_FLAG_SUM_GOOD) { - brcmf_dbg(INFO, "%s: BDC packet received with good rx-csum, flags 0x%x\n", + brcmf_dbg(CDC, "%s: BDC rcv, good checksum, flags 0x%x\n", brcmf_ifname(drvr, *ifidx), h->flags); pkt_set_sum_good(pktbuf, true); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index ea3f5f5..bc013cb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -18,21 +18,22 @@ #define _BRCMF_DBG_H_ /* message levels */ -#define BRCMF_TRACE_VAL 0x0002 -#define BRCMF_INFO_VAL 0x0004 -#define BRCMF_DATA_VAL 0x0008 -#define BRCMF_CTL_VAL 0x0010 -#define BRCMF_TIMER_VAL 0x0020 -#define BRCMF_HDRS_VAL 0x0040 -#define BRCMF_BYTES_VAL 0x0080 -#define BRCMF_INTR_VAL 0x0100 -#define BRCMF_GLOM_VAL 0x0200 -#define BRCMF_EVENT_VAL 0x0400 -#define BRCMF_BTA_VAL 0x0800 -#define BRCMF_FIL_VAL 0x1000 -#define BRCMF_USB_VAL 0x2000 -#define BRCMF_SCAN_VAL 0x4000 -#define BRCMF_CONN_VAL 0x8000 +#define BRCMF_TRACE_VAL 0x00000002 +#define BRCMF_INFO_VAL 0x00000004 +#define BRCMF_DATA_VAL 0x00000008 +#define BRCMF_CTL_VAL 0x00000010 +#define BRCMF_TIMER_VAL 0x00000020 +#define BRCMF_HDRS_VAL 0x00000040 +#define BRCMF_BYTES_VAL 0x00000080 +#define BRCMF_INTR_VAL 0x00000100 +#define BRCMF_GLOM_VAL 0x00000200 +#define BRCMF_EVENT_VAL 0x00000400 +#define BRCMF_BTA_VAL 0x00000800 +#define BRCMF_FIL_VAL 0x00001000 +#define BRCMF_USB_VAL 0x00002000 +#define BRCMF_SCAN_VAL 0x00004000 +#define BRCMF_CONN_VAL 0x00008000 +#define BRCMF_CDC_VAL 0x00010000 /* set default print format */ #undef pr_fmt diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 682cb02..a1ca691 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -459,7 +459,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) sprintf(info.version, "%lu", drvr->drv_version); if (copy_to_user(uaddr, &info, sizeof(info))) return -EFAULT; - brcmf_dbg(CTL, "given %*s, returning %s\n", + brcmf_dbg(TRACE, "given %*s, returning %s\n", (int)sizeof(drvname), drvname, info.driver); break; -- cgit v0.10.2 From 7833b5799fb4dd201d6808c164712ea9d0c3dec0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:45 +0100 Subject: brcmfmac: remove unused event related definitions The driver had some global definitions in dhd.h to map event identifiers to event names. With redesign of firmware event processing this has all moved to fweh module so these definitions can be removed. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 4937bf4..0388599 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -520,11 +520,6 @@ struct brcmf_pub { #endif }; -struct bcmevent_name { - uint event; - const char *name; -}; - struct brcmf_if_event { u8 ifidx; u8 action; @@ -564,8 +559,6 @@ static inline s32 brcmf_ndev_bssidx(struct net_device *ndev) return ifp->bssidx; } -extern const struct bcmevent_name bcmevent_names[]; - extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); /* Return pointer to interface name */ -- cgit v0.10.2 From 12b33dacb4bb3780512d3c6a4d064d9ed1172c0e Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:46 +0100 Subject: brcmfmac: cleanup netdev transmit callback The header of the ethernet packet is processed conditionally, but the check is wrong as it checks skb length is at least ETH_ALEN. It should check it is at least sizeof struct ethhdr instead. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index a1ca691..9ca7411 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -165,6 +165,7 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) int ret; struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; + struct ethhdr *eh; brcmf_dbg(TRACE, "Enter\n"); @@ -202,17 +203,20 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) } } - /* Update multicast statistic */ - if (skb->len >= ETH_ALEN) { - u8 *pktdata = (u8 *)(skb->data); - struct ethhdr *eh = (struct ethhdr *)pktdata; - - if (is_multicast_ether_addr(eh->h_dest)) - drvr->tx_multicast++; - if (ntohs(eh->h_proto) == ETH_P_PAE) - atomic_inc(&drvr->pend_8021x_cnt); + /* validate length for ether packet */ + if (skb->len < sizeof(*eh)) { + ret = -EINVAL; + dev_kfree_skb(skb); + goto done; } + /* handle ethernet header */ + eh = (struct ethhdr *)(skb->data); + if (is_multicast_ether_addr(eh->h_dest)) + drvr->tx_multicast++; + if (ntohs(eh->h_proto) == ETH_P_PAE) + atomic_inc(&drvr->pend_8021x_cnt); + /* If the protocol uses a data header, apply it */ brcmf_proto_hdrpush(drvr, ifp->idx, skb); -- cgit v0.10.2 From b84e3112ecc73482a7e07cd88bf2feaa60e42634 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:47 +0100 Subject: brcmfmac: remove unnecessary curly braces in dhd_attach() Stumbled into a curly braces used for if statement with only one conditional statement. Removing them. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 9ca7411..285a70e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -890,9 +890,8 @@ void brcmf_detach(struct device *dev) brcmf_bus_detach(drvr); - if (drvr->prot) { + if (drvr->prot) brcmf_proto_detach(drvr); - } brcmf_debugfs_detach(drvr); bus_if->drvr = NULL; -- cgit v0.10.2 From 03abad08bb837650feb2bd7581ef14c8a1c51964 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:48 +0100 Subject: brcmfmac: Remove unused caching dongle error. CDC errors are retained. However, it is never used so it can be removed. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 0388599..bbefaf3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -496,9 +496,6 @@ struct brcmf_pub { /* Last error return */ int bcmerror; - /* Last error from dongle */ - int dongle_error; - /* Suspend disable flag flag */ int suspend_disable_flag; /* "1" to disable all extra powersaving during suspend */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index db3bc2e..4557709 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -147,18 +147,6 @@ brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); - /* Respond "bcmerror" and "bcmerrorstr" with local cache */ - if (cmd == BRCMF_C_GET_VAR && buf) { - if (!strcmp((char *)buf, "bcmerrorstr")) { - strncpy((char *)buf, "bcm_error", - BCME_STRLEN); - goto done; - } else if (!strcmp((char *)buf, "bcmerror")) { - *(int *)buf = drvr->dongle_error; - goto done; - } - } - memset(msg, 0, sizeof(struct brcmf_proto_cdc_dcmd)); msg->cmd = cpu_to_le32(cmd); @@ -207,11 +195,8 @@ retry: } /* Check the ERROR flag */ - if (flags & CDC_DCMD_ERROR) { + if (flags & CDC_DCMD_ERROR) ret = le32_to_cpu(msg->status); - /* Cache error from dongle */ - drvr->dongle_error = ret; - } done: return ret; @@ -258,11 +243,8 @@ int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, } /* Check the ERROR flag */ - if (flags & CDC_DCMD_ERROR) { + if (flags & CDC_DCMD_ERROR) ret = le32_to_cpu(msg->status); - /* Cache error from dongle */ - drvr->dongle_error = ret; - } done: return ret; -- cgit v0.10.2 From 80fd2dbee00edcd19fb8c04a12dbeefc55533f2e Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:49 +0100 Subject: brcmfmac: Return correct error on netdev xmit. Netdev xmit routine brcfm_netdev_start_xmit was defined incorrectly and used wrong return codes. Always eat the packet and return ok. Remove drvr_up check since it is not relevant. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 285a70e..d655501 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -160,7 +160,8 @@ static void brcmf_netdev_set_multicast_list(struct net_device *ndev) schedule_work(&ifp->multicast_work); } -static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) +static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, + struct net_device *ndev) { int ret; struct brcmf_if *ifp = netdev_priv(ndev); @@ -169,20 +170,21 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) brcmf_dbg(TRACE, "Enter\n"); - /* Reject if down */ - if (!drvr->bus_if->drvr_up || - (drvr->bus_if->state != BRCMF_BUS_DATA)) { - brcmf_err("xmit rejected drvup=%d state=%d\n", - drvr->bus_if->drvr_up, - drvr->bus_if->state); + /* Can the device send data? */ + if (drvr->bus_if->state != BRCMF_BUS_DATA) { + brcmf_err("xmit rejected state=%d\n", drvr->bus_if->state); netif_stop_queue(ndev); - return -ENODEV; + dev_kfree_skb(skb); + ret = -ENODEV; + goto done; } if (!drvr->iflist[ifp->idx]) { brcmf_err("bad ifidx %d\n", ifp->idx); netif_stop_queue(ndev); - return -ENODEV; + dev_kfree_skb(skb); + ret = -ENODEV; + goto done; } /* Make sure there's enough room for any header */ @@ -230,7 +232,7 @@ done: drvr->bus_if->dstats.tx_packets++; /* Return ok: we always eat the packet */ - return 0; + return NETDEV_TX_OK; } void brcmf_txflowblock(struct device *dev, bool state) -- cgit v0.10.2 From 88d1239a1b9713cd505314fe9a1031c775b3eb3c Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:50 +0100 Subject: brcmfmac: Removing obsolete variables and inline functions. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index bbefaf3..a2f32fb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -481,33 +481,14 @@ struct brcmf_pub { unsigned long drv_version; /* Version of dongle-resident driver */ u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */ - /* Additional stats for the bus level */ - /* Multicast data packets sent to dongle */ unsigned long tx_multicast; - /* Packets flushed due to unscheduled sendup thread */ - unsigned long rx_flushed; - /* Number of times dpc scheduled by watchdog timer */ - unsigned long wd_dpc_sched; - - /* Number of flow control pkts recvd */ - unsigned long fc_packets; - - /* Last error return */ - int bcmerror; - - /* Suspend disable flag flag */ - int suspend_disable_flag; /* "1" to disable all extra powersaving - during suspend */ - int in_suspend; /* flag set to 1 when early suspend called */ - int dtim_skip; /* dtim skip , default 0 means wake each dtim */ struct brcmf_if *iflist[BRCMF_MAX_IFS]; struct mutex proto_block; unsigned char proto_buf[BRCMF_DCMD_MAXLEN]; - u8 macvalue[ETH_ALEN]; atomic_t pend_8021x_cnt; wait_queue_head_t pend_8021x_wait; @@ -550,11 +531,6 @@ struct brcmf_if { u8 mac_addr[ETH_ALEN]; }; -static inline s32 brcmf_ndev_bssidx(struct net_device *ndev) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - return ifp->bssidx; -} extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index 4557709..bb454cd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -92,8 +92,6 @@ struct brcmf_proto_bdc_header { struct brcmf_proto { u16 reqid; - u8 pending; - u32 lastcmd; u8 bus_header[BUS_HEADER_LEN]; struct brcmf_proto_cdc_dcmd msg; unsigned char buf[BRCMF_DCMD_MAXLEN + ROUND_UP_MARGIN]; -- cgit v0.10.2 From 40a23296854dded596fda33e0df4a7373229d75e Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:51 +0100 Subject: brcmfmac: Update init code routines from interface up. On interface up dongle gets inialized. Move UP command to common routine and update these common init routines using ifp. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index d655501..e3326a5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -585,14 +585,9 @@ static int brcmf_netdev_open(struct net_device *ndev) /* Get current TOE mode from dongle */ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 && (toe_ol & TOE_TX_CSUM_OL) != 0) - drvr->iflist[ifp->idx]->ndev->features |= - NETIF_F_IP_CSUM; + ndev->features |= NETIF_F_IP_CSUM; else - drvr->iflist[ifp->idx]->ndev->features &= - ~NETIF_F_IP_CSUM; - - /* make sure RF is ready for work */ - brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); + ndev->features &= ~NETIF_F_IP_CSUM; /* Allow transmit calls */ netif_start_queue(ndev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 1ec2d57..730da84 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4265,9 +4265,8 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) } static s32 -brcmf_dongle_roam(struct net_device *ndev, u32 roamvar, u32 bcn_timeout) +brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout) { - struct brcmf_if *ifp = netdev_priv(ndev); s32 err = 0; __le32 roamtrigger[2]; __le32 roam_delta[2]; @@ -4318,10 +4317,9 @@ dongle_rom_out: } static s32 -brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time, +brcmf_dongle_scantime(struct brcmf_if *ifp, s32 scan_assoc_time, s32 scan_unassoc_time, s32 scan_passive_time) { - struct brcmf_if *ifp = netdev_priv(ndev); s32 err = 0; err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME, @@ -4391,6 +4389,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) { struct net_device *ndev; struct wireless_dev *wdev; + struct brcmf_if *ifp; s32 power_mode; s32 err = 0; @@ -4399,35 +4398,34 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) ndev = cfg_to_ndev(cfg); wdev = ndev->ieee80211_ptr; + ifp = netdev_priv(ndev); + + /* make sure RF is ready for work */ + brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); - brcmf_dongle_scantime(ndev, WL_SCAN_CHANNEL_TIME, - WL_SCAN_UNASSOC_TIME, WL_SCAN_PASSIVE_TIME); + brcmf_dongle_scantime(ifp, WL_SCAN_CHANNEL_TIME, + WL_SCAN_UNASSOC_TIME, WL_SCAN_PASSIVE_TIME); power_mode = cfg->pwr_save ? PM_FAST : PM_OFF; - err = brcmf_fil_cmd_int_set(netdev_priv(ndev), BRCMF_C_SET_PM, - power_mode); + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, power_mode); if (err) goto default_conf_out; brcmf_dbg(INFO, "power save set to %s\n", (power_mode ? "enabled" : "disabled")); - err = brcmf_dongle_roam(ndev, (cfg->roam_on ? 0 : 1), - WL_BEACON_TIMEOUT); + err = brcmf_dongle_roam(ifp, (cfg->roam_on ? 0 : 1), WL_BEACON_TIMEOUT); if (err) goto default_conf_out; err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, NULL, NULL); - if (err && err != -EINPROGRESS) + if (err) goto default_conf_out; err = brcmf_dongle_probecap(cfg); if (err) goto default_conf_out; - /* -EINPROGRESS: Call commit handler */ - -default_conf_out: - cfg->dongle_up = true; +default_conf_out: return err; @@ -4436,8 +4434,6 @@ default_conf_out: static s32 __brcmf_cfg80211_up(struct brcmf_if *ifp) { set_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state); - if (ifp->idx) - return 0; return brcmf_config_dongle(ifp->drvr->config); } -- cgit v0.10.2 From 6960af6dce1f0b2d9d1b4ddf75952d54e633b923 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 3 Jan 2013 00:06:47 +0400 Subject: p54pci: don't return zero on failure paths in p54p_probe() If pci_set_dma_mask() or pci_set_consistent_dma_mask() fails in p54p_probe(), it breaks off initialization, deallocates all resources, but returns zero. Similar issue is if check for returned value of pci_resource_len() fails. The patch implements proper error code propagation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 933e5d9..57e3af8 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -559,6 +559,7 @@ static int p54p_probe(struct pci_dev *pdev, mem_len = pci_resource_len(pdev, 0); if (mem_len < sizeof(struct p54p_csr)) { dev_err(&pdev->dev, "Too short PCI resources\n"); + err = -ENODEV; goto err_disable_dev; } @@ -568,8 +569,10 @@ static int p54p_probe(struct pci_dev *pdev, goto err_disable_dev; } - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) || - pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { dev_err(&pdev->dev, "No suitable DMA available\n"); goto err_free_reg; } -- cgit v0.10.2 From fc40ca92344a4e4a45bf916cf067e92085b881ea Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 2 Jan 2013 16:23:01 -0800 Subject: wireless: mwifiex: remove unreachable paths We know 'firmware' is non-NULL from the beginning of mwifiex_prog_fw_w_helper, remove all !firmware paths from the rest of the function. Signed-off-by: Sasha Levin Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index 63ac9f2..5d4a10a 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -786,21 +786,6 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) return 0; } -/* This function reads one block of firmware data. */ -static int mwifiex_get_fw_data(struct mwifiex_adapter *adapter, - u32 offset, u32 len, u8 *buf) -{ - if (!buf || !len) - return -1; - - if (offset + len > adapter->firmware->size) - return -1; - - memcpy(buf, adapter->firmware->data + offset, len); - - return 0; -} - static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, struct mwifiex_fw_image *fw) { @@ -836,23 +821,14 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, dlen = 0; } else { /* copy the header of the fw_data to get the length */ - if (firmware) - memcpy(&fwdata->fw_hdr, &firmware[tlen], - sizeof(struct fw_header)); - else - mwifiex_get_fw_data(adapter, tlen, - sizeof(struct fw_header), - (u8 *)&fwdata->fw_hdr); + memcpy(&fwdata->fw_hdr, &firmware[tlen], + sizeof(struct fw_header)); dlen = le32_to_cpu(fwdata->fw_hdr.data_len); dnld_cmd = le32_to_cpu(fwdata->fw_hdr.dnld_cmd); tlen += sizeof(struct fw_header); - if (firmware) - memcpy(fwdata->data, &firmware[tlen], dlen); - else - mwifiex_get_fw_data(adapter, tlen, dlen, - (u8 *)fwdata->data); + memcpy(fwdata->data, &firmware[tlen], dlen); fwdata->seq_num = cpu_to_le32(fw_seqnum); tlen += dlen; -- cgit v0.10.2 From d35f1035b53e92167a8231e15121dd10f4aa8edd Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 2 Jan 2013 16:56:00 -0800 Subject: mwifiex: use correct htcapinfo for HT20 ibss network It is observed that same htcapinfo ie is included in beacon for HT20, HT40+ and HT40- ibss networks. This patch makes sure that we will not advertise 40Mhz flags while creating/joining ibss network in HT20 mode. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index 245a371..9cd6216 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -53,7 +53,9 @@ mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type, sizeof(sband->ht_cap.mcs)); if (priv->bss_mode == NL80211_IFTYPE_STATION || - sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) + (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && + (priv->adapter->sec_chan_offset != + IEEE80211_HT_PARAM_CHA_SEC_NONE))) /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */ SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask); diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 88664ae..3c7cabe 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -969,6 +969,16 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv, priv->adapter->config_bands); mwifiex_fill_cap_info(priv, radio_type, ht_cap); + if (adapter->sec_chan_offset == + IEEE80211_HT_PARAM_CHA_SEC_NONE) { + u16 tmp_ht_cap; + + tmp_ht_cap = le16_to_cpu(ht_cap->ht_cap.cap_info); + tmp_ht_cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + tmp_ht_cap &= ~IEEE80211_HT_CAP_SGI_40; + ht_cap->ht_cap.cap_info = cpu_to_le16(tmp_ht_cap); + } + pos += sizeof(struct mwifiex_ie_types_htcap); cmd_append_size += sizeof(struct mwifiex_ie_types_htcap); -- cgit v0.10.2 From 54428c57b6d7a9dc172ecfa80b07f17431015d09 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Wed, 2 Jan 2013 16:56:01 -0800 Subject: mwifiex: parse WMM IEs from hostapd for mwifiex AP This patch adds support for parsing WMM IEs from hostapd and setting them to FW via sys configure command. Patch also sets wiphy flag to advertise AP uAPSD support. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a875499..c4edb28 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1327,6 +1327,7 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, } mwifiex_set_ht_params(priv, bss_cfg, params); + mwifiex_set_wmm_params(priv, bss_cfg, params); if (params->inactivity_timeout > 0) { /* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */ @@ -2261,6 +2262,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter) wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME | WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD | + WIPHY_FLAG_AP_UAPSD | WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h index e9357d8..e8a569a 100644 --- a/drivers/net/wireless/mwifiex/decl.h +++ b/drivers/net/wireless/mwifiex/decl.h @@ -26,6 +26,7 @@ #include #include #include +#include #define MWIFIEX_MAX_BSS_NUM (3) @@ -58,6 +59,8 @@ #define MWIFIEX_RTS_MAX_VALUE (2347) #define MWIFIEX_FRAG_MIN_VALUE (256) #define MWIFIEX_FRAG_MAX_VALUE (2346) +#define MWIFIEX_WMM_VERSION 0x01 +#define MWIFIEX_WMM_SUBTYPE 0x01 #define MWIFIEX_RETRY_LIMIT 14 #define MWIFIEX_SDIO_BLOCK_SIZE 256 @@ -126,4 +129,19 @@ enum mwifiex_wmm_ac_e { WMM_AC_VI, WMM_AC_VO } __packed; + +struct ieee_types_wmm_ac_parameters { + u8 aci_aifsn_bitmap; + u8 ecw_bitmap; + __le16 tx_op_limit; +} __packed; + +struct mwifiex_types_wmm_info { + u8 oui[4]; + u8 subtype; + u8 version; + u8 qos_info; + u8 reserved; + struct ieee_types_wmm_ac_parameters ac_params[IEEE80211_NUM_ACS]; +} __packed; #endif /* !_MWIFIEX_DECL_H_ */ diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index 4dc8e2e..41c85dd 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -1131,12 +1131,6 @@ struct ieee_types_vendor_header { u8 version; } __packed; -struct ieee_types_wmm_ac_parameters { - u8 aci_aifsn_bitmap; - u8 ecw_bitmap; - __le16 tx_op_limit; -} __packed; - struct ieee_types_wmm_parameter { /* * WMM Parameter IE - Vendor Specific Header: @@ -1186,6 +1180,11 @@ struct mwifiex_ie_types_htcap { struct ieee80211_ht_cap ht_cap; } __packed; +struct mwifiex_ie_types_wmmcap { + struct mwifiex_ie_types_header header; + struct mwifiex_types_wmm_info wmm_info; +} __packed; + struct mwifiex_ie_types_htinfo { struct mwifiex_ie_types_header header; struct ieee80211_ht_operation ht_oper; diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h index 4e31c60..6095b3e 100644 --- a/drivers/net/wireless/mwifiex/ioctl.h +++ b/drivers/net/wireless/mwifiex/ioctl.h @@ -20,7 +20,6 @@ #ifndef _MWIFIEX_IOCTL_H_ #define _MWIFIEX_IOCTL_H_ -#include #include enum { @@ -107,6 +106,8 @@ struct mwifiex_uap_bss_param { u8 rates[MWIFIEX_SUPPORTED_RATES]; u32 sta_ao_timer; u32 ps_sta_ao_timer; + u8 qos_info; + struct mwifiex_types_wmm_info wmm_info; }; enum { diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index 1b3cfc8..d717c98 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -890,6 +890,10 @@ void mwifiex_set_ht_params(struct mwifiex_private *priv, struct cfg80211_ap_settings *params); void mwifiex_set_uap_rates(struct mwifiex_uap_bss_param *bss_cfg, struct cfg80211_ap_settings *params); +void +mwifiex_set_wmm_params(struct mwifiex_private *priv, + struct mwifiex_uap_bss_param *bss_cfg, + struct cfg80211_ap_settings *params); /* * This function checks if the queuing is RA based or not. diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index 8dd7224..6e76a15 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -219,6 +219,7 @@ void mwifiex_set_sys_config_invalid_data(struct mwifiex_uap_bss_param *config) config->rts_threshold = 0x7FFF; config->frag_threshold = 0x7FFF; config->retry_limit = 0x7F; + config->qos_info = 0xFF; } /* This function parses BSS related parameters from structure @@ -297,6 +298,38 @@ mwifiex_uap_bss_wpa(u8 **tlv_buf, void *cmd_buf, u16 *param_size) return; } +/* This function parses WMM related parameters from cfg80211_ap_settings + * structure and updates bss_config structure. + */ +void +mwifiex_set_wmm_params(struct mwifiex_private *priv, + struct mwifiex_uap_bss_param *bss_cfg, + struct cfg80211_ap_settings *params) +{ + const u8 *vendor_ie; + struct ieee_types_header *wmm_ie; + u8 wmm_oui[] = {0x00, 0x50, 0xf2, 0x02}; + + vendor_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, + WLAN_OUI_TYPE_MICROSOFT_WMM, + params->beacon.tail, + params->beacon.tail_len); + if (vendor_ie) { + wmm_ie = (struct ieee_types_header *)vendor_ie; + memcpy(&bss_cfg->wmm_info, wmm_ie + 1, + sizeof(bss_cfg->wmm_info)); + priv->wmm_enabled = 1; + } else { + memset(&bss_cfg->wmm_info, 0, sizeof(bss_cfg->wmm_info)); + memcpy(&bss_cfg->wmm_info.oui, wmm_oui, sizeof(wmm_oui)); + bss_cfg->wmm_info.subtype = MWIFIEX_WMM_SUBTYPE; + bss_cfg->wmm_info.version = MWIFIEX_WMM_VERSION; + priv->wmm_enabled = 0; + } + + bss_cfg->qos_info = 0x00; + return; +} /* This function parses BSS related parameters from structure * and prepares TLVs specific to WEP encryption. * These TLVs are appended to command buffer. @@ -354,6 +387,7 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) struct host_cmd_tlv_rates *tlv_rates; struct host_cmd_tlv_ageout_timer *ao_timer, *ps_ao_timer; struct mwifiex_ie_types_htcap *htcap; + struct mwifiex_ie_types_wmmcap *wmm_cap; struct mwifiex_uap_bss_param *bss_cfg = cmd_buf; int i; u16 cmd_size = *param_size; @@ -507,6 +541,16 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) tlv += sizeof(struct mwifiex_ie_types_htcap); } + if (bss_cfg->wmm_info.qos_info != 0xFF) { + wmm_cap = (struct mwifiex_ie_types_wmmcap *)tlv; + wmm_cap->header.type = cpu_to_le16(WLAN_EID_VENDOR_SPECIFIC); + wmm_cap->header.len = cpu_to_le16(sizeof(wmm_cap->wmm_info)); + memcpy(&wmm_cap->wmm_info, &bss_cfg->wmm_info, + sizeof(wmm_cap->wmm_info)); + cmd_size += sizeof(struct mwifiex_ie_types_wmmcap); + tlv += sizeof(struct mwifiex_ie_types_wmmcap); + } + if (bss_cfg->sta_ao_timer) { ao_timer = (struct host_cmd_tlv_ageout_timer *)tlv; ao_timer->tlv.type = cpu_to_le16(TLV_TYPE_UAP_AO_TIMER); -- cgit v0.10.2 From b686929c544be6d2d30b82dfb7a61a7766885177 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 3 Jan 2013 12:21:21 +0530 Subject: ath9k_hw: Enable calibration types in init_cal_settings Doing this in ath9k_hw_fill_cap_info() is odd and it's cleaner to do this in the init function for calibration. Also, setup the supported calibration type in init_cal_settings. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 8b0d8dc..598b847 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -323,6 +323,14 @@ static const struct ath9k_percal_data iq_cal_single_sample = { static void ar9003_hw_init_cal_settings(struct ath_hw *ah) { ah->iq_caldata.calData = &iq_cal_single_sample; + + if (AR_SREV_9300_20_OR_LATER(ah)) { + ah->enabled_cals |= TX_IQ_CAL; + if (AR_SREV_9485_OR_LATER(ah)) + ah->enabled_cals |= TX_IQ_ON_AGC_CAL; + } + + ah->supp_cals = IQ_MISMATCH_CAL; } /* @@ -1131,13 +1139,10 @@ skip_tx_iqcal: /* Initialize list pointers */ ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL; - ah->supp_cals = IQ_MISMATCH_CAL; - if (ah->supp_cals & IQ_MISMATCH_CAL) { - INIT_CAL(&ah->iq_caldata); - INSERT_CAL(ah, &ah->iq_caldata); - ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n"); - } + INIT_CAL(&ah->iq_caldata); + INSERT_CAL(ah, &ah->iq_caldata); + ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n"); if (ah->supp_cals & TEMP_COMP_CAL) { INIT_CAL(&ah->tempCompCalData); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ecf1c08..caf0626 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2568,12 +2568,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) rx_chainmask >>= 1; } - if (AR_SREV_9300_20_OR_LATER(ah)) { - ah->enabled_cals |= TX_IQ_CAL; - if (AR_SREV_9485_OR_LATER(ah)) - ah->enabled_cals |= TX_IQ_ON_AGC_CAL; - } - if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { if (!(ah->ent_mode & AR_ENT_OTP_49GHZ_DISABLE)) pCap->hw_caps |= ATH9K_HW_CAP_MCI; @@ -2582,7 +2576,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->hw_caps |= ATH9K_HW_CAP_RTT; } - if (AR_SREV_9280_20_OR_LATER(ah)) { pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE | ATH9K_HW_WOW_PATTERN_MATCH_EXACT; -- cgit v0.10.2 From 1a6e5d7c96c247ee0d9f446248679cac1bd65dd1 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 3 Jan 2013 12:21:23 +0530 Subject: ath9k_hw: Remove TEMP_COMP_CAL This is not enabled for any chip and is unused. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 598b847..a562a5d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -32,7 +32,6 @@ struct coeff { enum ar9003_cal_types { IQ_MISMATCH_CAL = BIT(0), - TEMP_COMP_CAL = BIT(1), }; static void ar9003_hw_setup_calibration(struct ath_hw *ah, @@ -49,7 +48,7 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah, */ REG_RMW_FIELD(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_IQCAL_LOG_COUNT_MAX, - currCal->calData->calCountMax); + currCal->calData->calCountMax); REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ); ath_dbg(common, CALIBRATE, @@ -58,14 +57,8 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah, /* Kick-off cal */ REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL); break; - case TEMP_COMP_CAL: - REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM, - AR_PHY_65NM_CH0_THERM_LOCAL, 1); - REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM, - AR_PHY_65NM_CH0_THERM_START, 1); - - ath_dbg(common, CALIBRATE, - "starting Temperature Compensation Calibration\n"); + default: + ath_err(common, "Invalid calibration type\n"); break; } } @@ -1144,13 +1137,6 @@ skip_tx_iqcal: INSERT_CAL(ah, &ah->iq_caldata); ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n"); - if (ah->supp_cals & TEMP_COMP_CAL) { - INIT_CAL(&ah->tempCompCalData); - INSERT_CAL(ah, &ah->tempCompCalData); - ath_dbg(common, CALIBRATE, - "enabling Temperature Compensation Calibration\n"); - } - /* Initialize current pointer to first element in list */ ah->cal_list_curr = ah->cal_list; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index d2b5229..38c5a87 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -768,7 +768,6 @@ struct ath_hw { struct ath9k_cal_list iq_caldata; struct ath9k_cal_list adcgain_caldata; struct ath9k_cal_list adcdc_caldata; - struct ath9k_cal_list tempCompCalData; struct ath9k_cal_list *cal_list; struct ath9k_cal_list *cal_list_last; struct ath9k_cal_list *cal_list_curr; -- cgit v0.10.2 From 96769caf8a755c9767b1a5c56fe71e062c2ad7da Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:20:47 +0530 Subject: mwl8k: Remove redundant txq_idx Ampdu stream index can be derived from stream->idx. So we no longer need stream->txq_idx, hence removing it. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 19b46fd..a13f690 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -160,7 +160,6 @@ struct mwl8k_ampdu_stream { u8 tid; u8 state; u8 idx; - u8 txq_idx; /* index of this stream in priv->txq */ }; struct mwl8k_priv { @@ -1741,7 +1740,6 @@ mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid) stream->state = AMPDU_STREAM_NEW; stream->tid = tid; stream->idx = i; - stream->txq_idx = MWL8K_TX_WMM_QUEUES + i; wiphy_debug(hw->wiphy, "Added a new stream for %pM %d", sta->addr, tid); return stream; @@ -1928,8 +1926,8 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, stream = mwl8k_lookup_stream(hw, sta->addr, tid); if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { - txpriority = stream->txq_idx; - index = stream->txq_idx; + txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; + index = stream->idx + MWL8K_TX_WMM_QUEUES; } else if (stream->state == AMPDU_STREAM_NEW) { /* We get here if the driver sends us packets * after we've initiated a stream, but before -- cgit v0.10.2 From 5f2a14940db23350612071a3c906c8960e3ceb9a Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:21:25 +0530 Subject: mwl8k: set ack policy to normal Set ACK policy to NORMAL when its not going to be an AMPDU packet. Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a13f690..7df18fa 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1926,6 +1926,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, stream = mwl8k_lookup_stream(hw, sta->addr, tid); if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { + WARN_ON(!(qos & MWL8K_QOS_ACK_POLICY_BLOCKACK)); txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; index = stream->idx + MWL8K_TX_WMM_QUEUES; } else if (stream->state == AMPDU_STREAM_NEW) { @@ -1969,6 +1970,9 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, } } spin_unlock(&priv->stream_lock); + } else { + qos &= ~MWL8K_QOS_ACK_POLICY_MASK; + qos |= MWL8K_QOS_ACK_POLICY_NORMAL; } dma = pci_map_single(priv->pdev, skb->data, -- cgit v0.10.2 From 7fb978b7e93b5c4a378eba5767c7513540b56642 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:22:56 +0530 Subject: mwl8k: Enable support to support additional ampdu streams Currently, we have 2 ampdu streams that can be created simultaneously. Firmware is capable of supporting additional streams. Add support to use these streams. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 7df18fa..9e08fc6 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -101,6 +101,18 @@ MODULE_PARM_DESC(ap_mode_default, #define MWL8K_MAX_TX_QUEUES (MWL8K_TX_WMM_QUEUES + MWL8K_MAX_AMPDU_QUEUES) #define mwl8k_tx_queues(priv) (MWL8K_TX_WMM_QUEUES + (priv)->num_ampdu_queues) +/* txpriorities are mapped with hw queues. + * Each hw queue has a txpriority. + */ +#define TOTAL_HW_TX_QUEUES 8 + +/* Each HW queue can have one AMPDU stream. + * But, because one of the hw queue is reserved, + * maximum AMPDU queues that can be created are + * one short of total tx queues. + */ +#define MWL8K_NUM_AMPDU_STREAMS (TOTAL_HW_TX_QUEUES - 1) + struct rxd_ops { int rxd_size; void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr); @@ -1733,7 +1745,7 @@ mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid) struct mwl8k_priv *priv = hw->priv; int i; - for (i = 0; i < priv->num_ampdu_queues; i++) { + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { stream = &priv->ampdu[i]; if (stream->state == AMPDU_NO_STREAM) { stream->sta = sta; @@ -1780,7 +1792,7 @@ mwl8k_lookup_stream(struct ieee80211_hw *hw, u8 *addr, u8 tid) struct mwl8k_priv *priv = hw->priv; int i; - for (i = 0 ; i < priv->num_ampdu_queues; i++) { + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { struct mwl8k_ampdu_stream *stream; stream = &priv->ampdu[i]; if (stream->state == AMPDU_NO_STREAM) @@ -1827,6 +1839,13 @@ static inline void mwl8k_tx_count_packet(struct ieee80211_sta *sta, u8 tid) tx_stats->pkts++; } +/* The hardware ampdu queues start from 5. + * txpriorities for ampdu queues are + * 5 6 7 0 1 2 3 4 ie., queue 5 is highest + * and queue 3 is lowest (queue 4 is reserved) + */ +#define BA_QUEUE 5 + static void mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, @@ -1927,8 +1946,12 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { WARN_ON(!(qos & MWL8K_QOS_ACK_POLICY_BLOCKACK)); - txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; - index = stream->idx + MWL8K_TX_WMM_QUEUES; + txpriority = (BA_QUEUE + stream->idx) % + TOTAL_HW_TX_QUEUES; + if (stream->idx <= 1) + index = stream->idx + + MWL8K_TX_WMM_QUEUES; + } else if (stream->state == AMPDU_STREAM_NEW) { /* We get here if the driver sends us packets * after we've initiated a stream, but before -- cgit v0.10.2 From 07f6dda1e7ed653c87ed329c99d6ae12ee114d52 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:23:33 +0530 Subject: mwl8k: changing mwl8k_destroy_ba prototype Currently, mwl8k_ampdu_stream is passed as one of the argument to the function mwl8k_destroy_ba. Instead of this pass only the stream index. This will be helpful during watchdog event handling when bitmap of stream indices are received. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 9e08fc6..76b2f91 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3788,7 +3788,7 @@ mwl8k_create_ba(struct ieee80211_hw *hw, struct mwl8k_ampdu_stream *stream, } static void mwl8k_destroy_ba(struct ieee80211_hw *hw, - struct mwl8k_ampdu_stream *stream) + u8 idx) { struct mwl8k_cmd_bastream *cmd; @@ -3800,10 +3800,10 @@ static void mwl8k_destroy_ba(struct ieee80211_hw *hw, cmd->header.length = cpu_to_le16(sizeof(*cmd)); cmd->action = cpu_to_le32(MWL8K_BA_DESTROY); - cmd->destroy_params.ba_context = cpu_to_le32(stream->idx); + cmd->destroy_params.ba_context = cpu_to_le32(idx); mwl8k_post_cmd(hw, &cmd->header); - wiphy_debug(hw->wiphy, "Deleted BA stream index %d\n", stream->idx); + wiphy_debug(hw->wiphy, "Deleted BA stream index %d\n", idx); kfree(cmd); } @@ -5117,7 +5117,7 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int i, rc = 0; struct mwl8k_priv *priv = hw->priv; struct mwl8k_ampdu_stream *stream; - u8 *addr = sta->addr; + u8 *addr = sta->addr, idx; struct mwl8k_sta *sta_info = MWL8K_STA(sta); if (!(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION)) @@ -5200,8 +5200,9 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: if (stream) { if (stream->state == AMPDU_STREAM_ACTIVE) { + idx = stream->idx; spin_unlock(&priv->stream_lock); - mwl8k_destroy_ba(hw, stream); + mwl8k_destroy_ba(hw, idx); spin_lock(&priv->stream_lock); } mwl8k_remove_stream(hw, stream); @@ -5217,8 +5218,9 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, if (!rc) stream->state = AMPDU_STREAM_ACTIVE; else { + idx = stream->idx; spin_unlock(&priv->stream_lock); - mwl8k_destroy_ba(hw, stream); + mwl8k_destroy_ba(hw, idx); spin_lock(&priv->stream_lock); wiphy_debug(hw->wiphy, "Failed adding stream for sta %pM tid %d\n", -- cgit v0.10.2 From cfacba12f573abd04a202e3e86c09f246339071f Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:24:03 +0530 Subject: mwl8k: Handle Watchdog events for the new ampdu streams With more ampdu streams, we need to handle watchdog events for the new ampdu streams. Handle these events appropriately. Earlier mwl8k_cmd_get_watchdog_bitmap used to return only one stream index and hence bitwise operations on the return value were not required. Now the function returns a bitmap with different bits are mapped with different stream indices. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 76b2f91..19afd2c 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3603,7 +3603,11 @@ static int mwl8k_cmd_get_watchdog_bitmap(struct ieee80211_hw *hw, u8 *bitmap) return rc; } -#define INVALID_BA 0xAA +#define MWL8K_WMM_QUEUE_NUMBER 3 + +static void mwl8k_destroy_ba(struct ieee80211_hw *hw, + u8 idx); + static void mwl8k_watchdog_ba_events(struct work_struct *work) { int rc; @@ -3611,24 +3615,40 @@ static void mwl8k_watchdog_ba_events(struct work_struct *work) struct mwl8k_ampdu_stream *streams; struct mwl8k_priv *priv = container_of(work, struct mwl8k_priv, watchdog_ba_handle); + struct ieee80211_hw *hw = priv->hw; + int i; + u32 status = 0; + + mwl8k_fw_lock(hw); rc = mwl8k_cmd_get_watchdog_bitmap(priv->hw, &bitmap); if (rc) - return; + goto done; - if (bitmap == INVALID_BA) - return; + spin_lock(&priv->stream_lock); /* the bitmap is the hw queue number. Map it to the ampdu queue. */ - stream_index = bitmap - MWL8K_TX_WMM_QUEUES; - - BUG_ON(stream_index >= priv->num_ampdu_queues); - - streams = &priv->ampdu[stream_index]; - - if (streams->state == AMPDU_STREAM_ACTIVE) - ieee80211_stop_tx_ba_session(streams->sta, streams->tid); + for (i = 0; i < TOTAL_HW_TX_QUEUES; i++) { + if (bitmap & (1 << i)) { + stream_index = (i + MWL8K_WMM_QUEUE_NUMBER) % + TOTAL_HW_TX_QUEUES; + streams = &priv->ampdu[stream_index]; + if (streams->state == AMPDU_STREAM_ACTIVE) { + ieee80211_stop_tx_ba_session(streams->sta, + streams->tid); + spin_unlock(&priv->stream_lock); + mwl8k_destroy_ba(hw, stream_index); + spin_lock(&priv->stream_lock); + } + } + } + spin_unlock(&priv->stream_lock); +done: + status = ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + iowrite32((status | MWL8K_A2H_INT_BA_WATCHDOG), + priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + mwl8k_fw_unlock(hw); return; } -- cgit v0.10.2 From c27a54d3f12383789b57a404649daf98a05cbd72 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:24:19 +0530 Subject: mwl8k: Handle watchdog event with highest prioriry Currently, command path waits till all the tx host queues are empty. Whenever watchdog event is raised, firmware expects driver to destroy ampdu queues immediately. This requires corresponding commands i.e. mwl8k_cmd_get_watchdog_bitmap and mwl8k_destroy_ba to be sent without waiting for the tx queues to be completely empty. Use "watchdog_event_pending" to ensure the above mentioned two commands are sent down immediately. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 19afd2c..3b046cc 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -213,6 +213,8 @@ struct mwl8k_priv { int fw_mutex_depth; struct completion *hostcmd_wait; + atomic_t watchdog_event_pending; + /* lock held over TX and TX reap */ spinlock_t tx_lock; @@ -1527,6 +1529,9 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) return -EBUSY; } + if (atomic_read(&priv->watchdog_event_pending)) + return 0; + /* * The TX queues are stopped at this point, so this test * doesn't need to take ->tx_lock. @@ -1548,6 +1553,14 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) spin_unlock_bh(&priv->tx_lock); timeout = wait_for_completion_timeout(&tx_wait, msecs_to_jiffies(MWL8K_TX_WAIT_TIMEOUT_MS)); + + if (atomic_read(&priv->watchdog_event_pending)) { + spin_lock_bh(&priv->tx_lock); + priv->tx_wait = NULL; + spin_unlock_bh(&priv->tx_lock); + return 0; + } + spin_lock_bh(&priv->tx_lock); if (timeout) { @@ -3645,6 +3658,7 @@ static void mwl8k_watchdog_ba_events(struct work_struct *work) spin_unlock(&priv->stream_lock); done: + atomic_dec(&priv->watchdog_event_pending); status = ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); iowrite32((status | MWL8K_A2H_INT_BA_WATCHDOG), priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); @@ -4346,6 +4360,10 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id) } if (status & MWL8K_A2H_INT_BA_WATCHDOG) { + iowrite32(~MWL8K_A2H_INT_BA_WATCHDOG, + priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + + atomic_inc(&priv->watchdog_event_pending); status &= ~MWL8K_A2H_INT_BA_WATCHDOG; ieee80211_queue_work(hw, &priv->watchdog_ba_handle); } @@ -5520,6 +5538,7 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw) priv->sniffer_enabled = false; priv->wmm_enabled = false; priv->pending_tx_pkts = 0; + atomic_set(&priv->watchdog_event_pending, 0); rc = mwl8k_rxq_init(hw, 0); if (rc) -- cgit v0.10.2 From c2f2e2029bea2a8a759b2bc2a44f4d41539af236 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:24:44 +0530 Subject: mwl8k: bump firmware API to 3 New firmware is required to support a) Add support for additional ampdu streams b) Handle corresponding watchdog events to destroy ampdu streams Bumping firmware API version by one. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 3b046cc..c4d287b 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5321,7 +5321,7 @@ enum { MWL8366, }; -#define MWL8K_8366_AP_FW_API 2 +#define MWL8K_8366_AP_FW_API 3 #define _MWL8K_8366_AP_FW(api) "mwl8k/fmimage_8366_ap-" #api ".fw" #define MWL8K_8366_AP_FW(api) _MWL8K_8366_AP_FW(api) -- cgit v0.10.2 From 03c2dc73581ad4ae54f1ccfc1463929b16b8b736 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 3 Jan 2013 14:55:48 +0530 Subject: ath9k_hw: Fix calibration for AR9340 TX_IQ_ON_AGC_CAL should not be enabled for AR9340. TX-IQ calibration is run as part of AGC calibration only for AR9485, AR9462 and AR9565. For the others (AR9300, AR9330, AR9340), TX-IQ cal is done independent of AGC-cal. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index a562a5d..fa67e84 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -319,7 +319,7 @@ static void ar9003_hw_init_cal_settings(struct ath_hw *ah) if (AR_SREV_9300_20_OR_LATER(ah)) { ah->enabled_cals |= TX_IQ_CAL; - if (AR_SREV_9485_OR_LATER(ah)) + if (AR_SREV_9485_OR_LATER(ah) && !AR_SREV_9340(ah)) ah->enabled_cals |= TX_IQ_ON_AGC_CAL; } -- cgit v0.10.2 From 929a03aeb149017e88fbe5878c2b6585cfda8704 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:20 +0100 Subject: bcma: make bcma_find_core_unit() accessible This bcma_find_core_unit() is needed by the mips driver in the next patch. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 4a2d72e..d35294e 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struct bcma_bus *bus, int bcma_bus_suspend(struct bcma_bus *bus); int bcma_bus_resume(struct bcma_bus *bus); #endif +struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, + u8 unit); /* scan.c */ int bcma_bus_scan(struct bcma_bus *bus); diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 53ba20c..d12b7da 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -81,8 +81,8 @@ struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) } EXPORT_SYMBOL_GPL(bcma_find_core); -static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, - u8 unit) +struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, + u8 unit) { struct bcma_device *core; -- cgit v0.10.2 From e3f05a42faac627d8704c76c1927e09b22443b7b Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:21 +0100 Subject: bcma: mips: explicit assign IRQ numbers The assignment of the IRQs to the cores of the chips by iterating over the cores is complicated and causes problems with SoC like the BCM4706 with two GMAC core where just one should get a dedicated IRQ number. Now the code assigns the same IRQs to the cores as the code from the Broadcom SDK does. If the SoC is not know the current assigned IRQs are only read out and an error message is printed. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 792daad..171be0f 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -147,6 +147,22 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) dev->id.id, oldirq + 2, irq + 2); } +static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, + u16 coreid, u8 unit) +{ + struct bcma_device *core; + + core = bcma_find_core_unit(bus, coreid, unit); + if (!core) { + bcma_warn(bus, + "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", + coreid, unit); + return; + } + + bcma_core_mips_set_irq(core, irq); +} + static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) { int i; @@ -242,35 +258,47 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) mcore->assigned_irqs = 1; - /* Assign IRQs to all cores on the bus */ - list_for_each_entry(core, &bus->cores, list) { - int mips_irq; - if (core->irq) - continue; - - mips_irq = bcma_core_mips_irq(core); - if (mips_irq > 4) - core->irq = 0; - else - core->irq = mips_irq + 2; - if (core->irq > 5) - continue; - switch (core->id.id) { - case BCMA_CORE_PCI: - case BCMA_CORE_PCIE: - case BCMA_CORE_ETHERNET: - case BCMA_CORE_ETHERNET_GBIT: - case BCMA_CORE_MAC_GBIT: - case BCMA_CORE_80211: - case BCMA_CORE_USB20_HOST: - /* These devices get their own IRQ line if available, - * the rest goes on IRQ0 - */ - if (mcore->assigned_irqs <= 4) - bcma_core_mips_set_irq(core, - mcore->assigned_irqs++); - break; + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM4716: + case BCMA_CHIP_ID_BCM4748: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); + break; + case BCMA_CHIP_ID_BCM5356: + case BCMA_CHIP_ID_BCM47162: + case BCMA_CHIP_ID_BCM53572: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + break; + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM4749: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); + break; + case BCMA_CHIP_ID_BCM4706: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, + 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); + bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, + 0); + break; + default: + list_for_each_entry(core, &bus->cores, list) { + core->irq = bcma_core_irq(core); } + bcma_err(bus, + "Unknown device (0x%x) found, can not configure IRQs\n", + bus->chipinfo.id); } bcma_info(bus, "IRQ reconfiguration done\n"); bcma_core_mips_dump_irq(bus); -- cgit v0.10.2 From 7401cb63d00994dbdfdc2916b949b22e27475436 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:22 +0100 Subject: bcma: mips: make some info messages debug messages Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 171be0f..486aa2d 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) 1 << irqflag); } - bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n", - dev->id.id, oldirq + 2, irq + 2); + bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", + dev->id.id, oldirq + 2, irq + 2); } static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, @@ -167,7 +167,7 @@ static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) { int i; static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; - printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); + printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); for (i = 0; i <= 6; i++) printk(" %s%s", irq_name[i], i == irq ? "*" : " "); printk("\n"); @@ -252,7 +252,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) if (mcore->setup_done) return; - bcma_info(bus, "Initializing MIPS core...\n"); + bcma_debug(bus, "Initializing MIPS core...\n"); bcma_core_mips_early_init(mcore); @@ -300,7 +300,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) "Unknown device (0x%x) found, can not configure IRQs\n", bus->chipinfo.id); } - bcma_info(bus, "IRQ reconfiguration done\n"); + bcma_debug(bus, "IRQ reconfiguration done\n"); bcma_core_mips_dump_irq(bus); mcore->setup_done = true; -- cgit v0.10.2 From db5230d1b3c5f7c62564de2ef07ea1c633548959 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:23 +0100 Subject: bcma: mips: show also disabled IRQs Some cores do not have a IRQ assigned and some do not support when an IRQ is assigned to them, this is now handled and printed out in the code. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 486aa2d..6981507 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct bcma_device *dev) return dev->core_index; flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); - return flag & 0x1F; + if (flag) + return flag & 0x1F; + else + return 0x3f; } /* Get the MIPS IRQ assignment for a specified device. * If unassigned, 0 is returned. + * If disabled, 5 is returned. + * If not supported, 6 is returned. */ unsigned int bcma_core_mips_irq(struct bcma_device *dev) { @@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct bcma_device *dev) unsigned int irq; irqflag = bcma_core_mips_irqflag(dev); + if (irqflag == 0x3f) + return 6; - for (irq = 1; irq <= 4; irq++) + for (irq = 0; irq <= 4; irq++) if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & (1 << irqflag)) return irq; - return 0; + return 5; } EXPORT_SYMBOL(bcma_core_mips_irq); @@ -114,7 +121,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ~(1 << irqflag)); - else + else if (oldirq != 5) bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); /* assign the new one */ @@ -144,7 +151,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) } bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", - dev->id.id, oldirq + 2, irq + 2); + dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); } static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, -- cgit v0.10.2 From 8f9dc85348ac37ff3b6b031d22e93a5b59d81f83 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:24 +0100 Subject: bcma: mips: remove assigned_irqs from structure This member is not needed any more. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 6981507..c6d7be3 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -263,8 +263,6 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) bcma_core_mips_early_init(mcore); - mcore->assigned_irqs = 1; - switch (bus->chipinfo.id) { case BCMA_CHIP_ID_BCM4716: case BCMA_CHIP_ID_BCM4748: diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 0baf8a5..6495579 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -36,7 +36,6 @@ struct bcma_drv_mips { struct bcma_device *core; u8 setup_done:1; u8 early_setup_done:1; - unsigned int assigned_irqs; }; #ifdef CONFIG_BCMA_DRIVER_MIPS -- cgit v0.10.2 From 6ba1eafed183c6e0886d3483c8acac4efe1e95db Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:25 +0100 Subject: bcma: mips: rename oldirqflag to irqinitmask The new name better matches the use of this variable. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index c6d7be3..8a51c79 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -130,9 +130,9 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | (1 << irqflag)); } else { - u32 oldirqflag = bcma_read32(mdev, - BCMA_MIPS_MIPS74K_INTMASK(irq)); - if (oldirqflag) { + u32 irqinitmask = bcma_read32(mdev, + BCMA_MIPS_MIPS74K_INTMASK(irq)); + if (irqinitmask) { struct bcma_device *core; /* backplane irq line is in use, find out who uses @@ -140,7 +140,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) */ list_for_each_entry(core, &bus->cores, list) { if ((1 << bcma_core_mips_irqflag(core)) == - oldirqflag) { + irqinitmask) { bcma_core_mips_set_irq(core, 0); break; } -- cgit v0.10.2 From 659c4788611f725ede2def6e4db5d8d4a59b93b5 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:28 -0800 Subject: mwifiex: access interrupt status only while holding lock This patch fixes a bug for few instances where PCIe interrupt status variable is accessed without holding spin lock. This can result into missing interrupts. Fix this by copying interrupt status to a local variable and then using it for calling specific routine. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 13fbc4e..e4c2cfd 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1594,39 +1594,40 @@ exit: static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) { int ret; - u32 pcie_ireg = 0; + u32 pcie_ireg; unsigned long flags; spin_lock_irqsave(&adapter->int_lock, flags); /* Clear out unused interrupts */ - adapter->int_status &= HOST_INTR_MASK; + pcie_ireg = adapter->int_status; + adapter->int_status = 0; spin_unlock_irqrestore(&adapter->int_lock, flags); - while (adapter->int_status & HOST_INTR_MASK) { - if (adapter->int_status & HOST_INTR_DNLD_DONE) { - adapter->int_status &= ~HOST_INTR_DNLD_DONE; + while (pcie_ireg & HOST_INTR_MASK) { + if (pcie_ireg & HOST_INTR_DNLD_DONE) { + pcie_ireg &= ~HOST_INTR_DNLD_DONE; if (adapter->data_sent) { dev_dbg(adapter->dev, "info: DATA sent intr\n"); adapter->data_sent = false; } } - if (adapter->int_status & HOST_INTR_UPLD_RDY) { - adapter->int_status &= ~HOST_INTR_UPLD_RDY; + if (pcie_ireg & HOST_INTR_UPLD_RDY) { + pcie_ireg &= ~HOST_INTR_UPLD_RDY; dev_dbg(adapter->dev, "info: Rx DATA\n"); ret = mwifiex_pcie_process_recv_data(adapter); if (ret) return ret; } - if (adapter->int_status & HOST_INTR_EVENT_RDY) { - adapter->int_status &= ~HOST_INTR_EVENT_RDY; + if (pcie_ireg & HOST_INTR_EVENT_RDY) { + pcie_ireg &= ~HOST_INTR_EVENT_RDY; dev_dbg(adapter->dev, "info: Rx EVENT\n"); ret = mwifiex_pcie_process_event_ready(adapter); if (ret) return ret; } - if (adapter->int_status & HOST_INTR_CMD_DONE) { - adapter->int_status &= ~HOST_INTR_CMD_DONE; + if (pcie_ireg & HOST_INTR_CMD_DONE) { + pcie_ireg &= ~HOST_INTR_CMD_DONE; if (adapter->cmd_sent) { dev_dbg(adapter->dev, "info: CMD sent Interrupt\n"); @@ -1654,8 +1655,6 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) "Write register failed\n"); return -1; } - adapter->int_status |= pcie_ireg; - adapter->int_status &= HOST_INTR_MASK; } } -- cgit v0.10.2 From c6d1d87a10d1e5317701676c39bbec20e4651b91 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:29 -0800 Subject: mwifiex: add init_fw_port handler for PCIe interface This patch adds support for init_fw_port handler for PCIe interface, which resets RXBD read pointer for PCIe. This fixes issue where RX doesn't work until some TX from driver happens. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index 39f03ce..e00b806 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -591,6 +591,12 @@ int mwifiex_init_fw(struct mwifiex_adapter *adapter) return -1; } } + + if (adapter->if_ops.init_fw_port) { + if (adapter->if_ops.init_fw_port(adapter)) + return -1; + } + for (i = 0; i < adapter->priv_num; i++) { if (adapter->priv[i]) { ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta); diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index d717c98..ef02a5b 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -599,6 +599,7 @@ struct mwifiex_if_ops { int (*cmdrsp_complete) (struct mwifiex_adapter *, struct sk_buff *); int (*event_complete) (struct mwifiex_adapter *, struct sk_buff *); int (*data_complete) (struct mwifiex_adapter *, struct sk_buff *); + int (*init_fw_port) (struct mwifiex_adapter *); int (*dnld_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *); void (*card_reset) (struct mwifiex_adapter *); }; diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index e4c2cfd..191c682 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -966,8 +966,23 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return 0; } -/* - * This function downloads commands to the device +/* This function init rx port in firmware which in turn enables to receive data + * from device before transmitting any packet. + */ +static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + + /* Write the RX ring read pointer in to REG_RXBD_RDPTR */ + if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, card->rxbd_rdptr | 0)) { + dev_err(adapter->dev, + "RECV DATA: failed to write REG_RXBD_RDPTR\n"); + return -1; + } + return 0; +} + +/* This function downloads commands to the device */ static int mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) @@ -1899,6 +1914,7 @@ static struct mwifiex_if_ops pcie_ops = { .event_complete = mwifiex_pcie_event_complete, .update_mp_end_port = NULL, .cleanup_mpa_buf = NULL, + .init_fw_port = mwifiex_pcie_init_fw_port, }; /* -- cgit v0.10.2 From fc3314609047daf472b3ffc49f9a1c5608068713 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:30 -0800 Subject: mwifiex: use pci_alloc/free_consistent APIs for PCIe This patch uses pci_alloc_consistent and pci_free_consistent APIs for mwifiex_pcie driver. Consistent DMA memory is allocated for TX, RX and event rings. Command buffer and command response buffer also uses map/unmap memory APIs to download commands and get command responses. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 191c682..ac20bc4 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -39,17 +39,20 @@ static struct semaphore add_remove_card_sem; static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter); static int mwifiex_pcie_resume(struct pci_dev *pdev); -/* - * This function is called after skb allocation to update - * "skb->cb" with physical address of data pointer. - */ -static phys_addr_t *mwifiex_update_sk_buff_pa(struct sk_buff *skb) +static int +mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb, + int size, int flags) { - phys_addr_t *buf_pa = MWIFIEX_SKB_PACB(skb); - - *buf_pa = (phys_addr_t)virt_to_phys(skb->data); + struct pcie_service_card *card = adapter->card; + dma_addr_t buf_pa; - return buf_pa; + buf_pa = pci_map_single(card->dev, skb->data, size, flags); + if (pci_dma_mapping_error(card->dev, buf_pa)) { + dev_err(adapter->dev, "failed to map pci memory!\n"); + return -1; + } + memcpy(skb->cb, &buf_pa, sizeof(dma_addr_t)); + return 0; } /* @@ -60,8 +63,8 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter) u32 *cookie_addr; struct pcie_service_card *card = adapter->card; - if (card->sleep_cookie) { - cookie_addr = (u32 *)card->sleep_cookie->data; + if (card->sleep_cookie_vbase) { + cookie_addr = (u32 *)card->sleep_cookie_vbase; dev_dbg(adapter->dev, "info: ACCESS_HW: sleep cookie=0x%x\n", *cookie_addr); if (*cookie_addr == FW_AWAKE_COOKIE) @@ -366,9 +369,7 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; - struct sk_buff *skb; int i; - phys_addr_t *buf_pa; /* * driver maintaines the write pointer and firmware maintaines the read @@ -384,16 +385,18 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) MWIFIEX_MAX_TXRX_BD; dev_dbg(adapter->dev, "info: txbd_ring: Allocating %d bytes\n", card->txbd_ring_size); - card->txbd_ring_vbase = kzalloc(card->txbd_ring_size, GFP_KERNEL); + card->txbd_ring_vbase = pci_alloc_consistent(card->dev, + card->txbd_ring_size, + &card->txbd_ring_pbase); if (!card->txbd_ring_vbase) { - dev_err(adapter->dev, "Unable to alloc buffer for txbd ring\n"); + dev_err(adapter->dev, + "allocate consistent memory (%d bytes) failed!\n", + card->txbd_ring_size); return -ENOMEM; } - card->txbd_ring_pbase = virt_to_phys(card->txbd_ring_vbase); - dev_dbg(adapter->dev, "info: txbd_ring - base: %p, pbase: %#x:%x, len: %x\n", - card->txbd_ring_vbase, (u32)card->txbd_ring_pbase, + card->txbd_ring_vbase, (unsigned int)card->txbd_ring_pbase, (u32)((u64)card->txbd_ring_pbase >> 32), card->txbd_ring_size); for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { @@ -402,24 +405,9 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) (sizeof(struct mwifiex_pcie_buf_desc) * i)); - /* Allocate buffer here so that firmware can DMA data from it */ - skb = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); - if (!skb) { - dev_err(adapter->dev, "Unable to allocate skb for TX ring.\n"); - kfree(card->txbd_ring_vbase); - return -ENOMEM; - } - buf_pa = mwifiex_update_sk_buff_pa(skb); - - skb_put(skb, MWIFIEX_RX_DATA_BUF_SIZE); - dev_dbg(adapter->dev, "info: TX ring: add new skb base: %p, " - "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)*buf_pa, - (u32)(((u64)*buf_pa >> 32)), skb->len); - - card->tx_buf_list[i] = skb; - card->txbd_ring[i]->paddr = *buf_pa; - card->txbd_ring[i]->len = (u16)skb->len; + card->tx_buf_list[i] = NULL; + card->txbd_ring[i]->paddr = 0; + card->txbd_ring[i]->len = 0; card->txbd_ring[i]->flags = 0; } @@ -429,11 +417,16 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->tx_buf_list[i]) - dev_kfree_skb_any(card->tx_buf_list[i]); + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, card->txbd_ring[i]->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } card->tx_buf_list[i] = NULL; card->txbd_ring[i]->paddr = 0; card->txbd_ring[i]->len = 0; @@ -441,11 +434,15 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) card->txbd_ring[i] = NULL; } - kfree(card->txbd_ring_vbase); + if (card->txbd_ring_vbase) + pci_free_consistent(card->dev, card->txbd_ring_size, + card->txbd_ring_vbase, + card->txbd_ring_pbase); card->txbd_ring_size = 0; card->txbd_wrptr = 0; card->txbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; card->txbd_ring_vbase = NULL; + card->txbd_ring_pbase = 0; return 0; } @@ -458,7 +455,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct sk_buff *skb; int i; - phys_addr_t *buf_pa; + dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -472,13 +469,15 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) MWIFIEX_MAX_TXRX_BD; dev_dbg(adapter->dev, "info: rxbd_ring: Allocating %d bytes\n", card->rxbd_ring_size); - card->rxbd_ring_vbase = kzalloc(card->rxbd_ring_size, GFP_KERNEL); + card->rxbd_ring_vbase = pci_alloc_consistent(card->dev, + card->rxbd_ring_size, + &card->rxbd_ring_pbase); if (!card->rxbd_ring_vbase) { - dev_err(adapter->dev, "Unable to allocate buffer for " - "rxbd_ring.\n"); + dev_err(adapter->dev, + "allocate consistent memory (%d bytes) failed!\n", + card->rxbd_ring_size); return -ENOMEM; } - card->rxbd_ring_pbase = virt_to_phys(card->rxbd_ring_vbase); dev_dbg(adapter->dev, "info: rxbd_ring - base: %p, pbase: %#x:%x, len: %#x\n", @@ -500,16 +499,20 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) kfree(card->rxbd_ring_vbase); return -ENOMEM; } - buf_pa = mwifiex_update_sk_buff_pa(skb); - skb_put(skb, MWIFIEX_RX_DATA_BUF_SIZE); + if (mwifiex_map_pci_memory(adapter, skb, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); dev_dbg(adapter->dev, "info: RX ring: add new skb base: %p, " "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)*buf_pa, (u32)((u64)*buf_pa >> 32), + skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), skb->len); card->rx_buf_list[i] = skb; - card->rxbd_ring[i]->paddr = *buf_pa; + card->rxbd_ring[i]->paddr = buf_pa; card->rxbd_ring[i]->len = (u16)skb->len; card->rxbd_ring[i]->flags = 0; } @@ -523,11 +526,17 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->rx_buf_list[i]) - dev_kfree_skb_any(card->rx_buf_list[i]); + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, card->rxbd_ring[i]->paddr , + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } card->rx_buf_list[i] = NULL; card->rxbd_ring[i]->paddr = 0; card->rxbd_ring[i]->len = 0; @@ -535,11 +544,15 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) card->rxbd_ring[i] = NULL; } - kfree(card->rxbd_ring_vbase); + if (card->rxbd_ring_vbase) + pci_free_consistent(card->dev, card->rxbd_ring_size, + card->rxbd_ring_vbase, + card->rxbd_ring_pbase); card->rxbd_ring_size = 0; card->rxbd_wrptr = 0; card->rxbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; card->rxbd_ring_vbase = NULL; + card->rxbd_ring_pbase = 0; return 0; } @@ -552,7 +565,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct sk_buff *skb; int i; - phys_addr_t *buf_pa; + dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -566,13 +579,15 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) MWIFIEX_MAX_EVT_BD; dev_dbg(adapter->dev, "info: evtbd_ring: Allocating %d bytes\n", card->evtbd_ring_size); - card->evtbd_ring_vbase = kzalloc(card->evtbd_ring_size, GFP_KERNEL); + card->evtbd_ring_vbase = pci_alloc_consistent(card->dev, + card->evtbd_ring_size, + &card->evtbd_ring_pbase); if (!card->evtbd_ring_vbase) { dev_err(adapter->dev, - "Unable to allocate buffer. Terminating download\n"); + "allocate consistent memory (%d bytes) failed!\n", + card->evtbd_ring_size); return -ENOMEM; } - card->evtbd_ring_pbase = virt_to_phys(card->evtbd_ring_vbase); dev_dbg(adapter->dev, "info: CMDRSP/EVT bd_ring - base: %p pbase: %#x:%x len: %#x\n", @@ -594,16 +609,20 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) kfree(card->evtbd_ring_vbase); return -ENOMEM; } - buf_pa = mwifiex_update_sk_buff_pa(skb); skb_put(skb, MAX_EVENT_SIZE); + if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); dev_dbg(adapter->dev, "info: Evt ring: add new skb. base: %p, " "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)*buf_pa, (u32)((u64)*buf_pa >> 32), + skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), skb->len); card->evt_buf_list[i] = skb; - card->evtbd_ring[i]->paddr = *buf_pa; + card->evtbd_ring[i]->paddr = buf_pa; card->evtbd_ring[i]->len = (u16)skb->len; card->evtbd_ring[i]->flags = 0; } @@ -617,11 +636,16 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { - if (card->evt_buf_list[i]) - dev_kfree_skb_any(card->evt_buf_list[i]); + if (card->evt_buf_list[i]) { + skb = card->evt_buf_list[i]; + pci_unmap_single(card->dev, card->evtbd_ring[i]->paddr, + MAX_EVENT_SIZE, PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } card->evt_buf_list[i] = NULL; card->evtbd_ring[i]->paddr = 0; card->evtbd_ring[i]->len = 0; @@ -629,11 +653,15 @@ static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_ring[i] = NULL; } - kfree(card->evtbd_ring_vbase); + if (card->evtbd_ring_vbase) + pci_free_consistent(card->dev, card->evtbd_ring_size, + card->evtbd_ring_vbase, + card->evtbd_ring_pbase); card->evtbd_wrptr = 0; card->evtbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; card->evtbd_ring_size = 0; card->evtbd_ring_vbase = NULL; + card->evtbd_ring_pbase = 0; return 0; } @@ -653,21 +681,12 @@ static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter) "Unable to allocate skb for command response data.\n"); return -ENOMEM; } - mwifiex_update_sk_buff_pa(skb); skb_put(skb, MWIFIEX_UPLD_SIZE); - card->cmdrsp_buf = skb; + if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; - skb = NULL; - /* Allocate memory for sending command to firmware */ - skb = dev_alloc_skb(MWIFIEX_SIZE_OF_CMD_BUFFER); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for command data.\n"); - return -ENOMEM; - } - mwifiex_update_sk_buff_pa(skb); - skb_put(skb, MWIFIEX_SIZE_OF_CMD_BUFFER); - card->cmd_buf = skb; + card->cmdrsp_buf = skb; return 0; } @@ -678,18 +697,26 @@ static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter) { struct pcie_service_card *card; + dma_addr_t buf_pa; if (!adapter) return 0; card = adapter->card; - if (card && card->cmdrsp_buf) + if (card && card->cmdrsp_buf) { + MWIFIEX_SKB_PACB(card->cmdrsp_buf, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE); dev_kfree_skb_any(card->cmdrsp_buf); + } - if (card && card->cmd_buf) + if (card && card->cmd_buf) { + MWIFIEX_SKB_PACB(card->cmd_buf, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_SIZE_OF_CMD_BUFFER, + PCI_DMA_TODEVICE); dev_kfree_skb_any(card->cmd_buf); - + } return 0; } @@ -698,27 +725,19 @@ static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter) */ static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter *adapter) { - struct sk_buff *skb; struct pcie_service_card *card = adapter->card; - /* Allocate memory for sleep cookie */ - skb = dev_alloc_skb(sizeof(u32)); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for sleep cookie!\n"); + card->sleep_cookie_vbase = pci_alloc_consistent(card->dev, sizeof(u32), + &card->sleep_cookie_pbase); + if (!card->sleep_cookie_vbase) { + dev_err(adapter->dev, "pci_alloc_consistent failed!\n"); return -ENOMEM; } - mwifiex_update_sk_buff_pa(skb); - skb_put(skb, sizeof(u32)); - /* Init val of Sleep Cookie */ - *(u32 *)skb->data = FW_AWAKE_COOKIE; + *(u32 *)card->sleep_cookie_vbase = FW_AWAKE_COOKIE; dev_dbg(adapter->dev, "alloc_scook: sleep cookie=0x%x\n", - *((u32 *)skb->data)); - - /* Save the sleep cookie */ - card->sleep_cookie = skb; + *((u32 *)card->sleep_cookie_vbase)); return 0; } @@ -735,9 +754,11 @@ static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) card = adapter->card; - if (card && card->sleep_cookie) { - dev_kfree_skb_any(card->sleep_cookie); - card->sleep_cookie = NULL; + if (card && card->sleep_cookie_vbase) { + pci_free_consistent(card->dev, sizeof(u32), + card->sleep_cookie_vbase, + card->sleep_cookie_pbase); + card->sleep_cookie_vbase = NULL; } return 0; @@ -751,7 +772,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; u32 wrindx, rdptr; - phys_addr_t *buf_pa; + phys_addr_t buf_pa; __le16 *tmp; if (!mwifiex_pcie_ok_to_access_hw(adapter)) @@ -785,8 +806,8 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) *tmp = cpu_to_le16(MWIFIEX_TYPE_DATA); skb_put(skb_data, MWIFIEX_RX_DATA_BUF_SIZE - skb_data->len); skb_trim(skb_data, skb->len); - buf_pa = MWIFIEX_SKB_PACB(skb_data); - card->txbd_ring[wrindx]->paddr = *buf_pa; + MWIFIEX_SKB_PACB(skb_data, &buf_pa); + card->txbd_ring[wrindx]->paddr = buf_pa; card->txbd_ring[wrindx]->len = (u16)skb_data->len; card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | MWIFIEX_BD_FLAG_LAST_DESC; @@ -918,32 +939,41 @@ done: static int mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { - phys_addr_t *buf_pa = MWIFIEX_SKB_PACB(skb); + dma_addr_t buf_pa; + struct pcie_service_card *card = adapter->card; - if (!(skb->data && skb->len && *buf_pa)) { + if (!(skb->data && skb->len)) { dev_err(adapter->dev, - "Invalid parameter in %s <%p, %#x:%x, %x>\n", - __func__, skb->data, skb->len, - (u32)*buf_pa, (u32)((u64)*buf_pa >> 32)); + "Invalid parameter in %s <%p. len %d>\n", + __func__, skb->data, skb->len); return -1; } + if (mwifiex_map_pci_memory(adapter, skb, skb->len , PCI_DMA_TODEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); + /* Write the lower 32bits of the physical address to scratch * register 0 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_0_REG, (u32)*buf_pa)) { + if (mwifiex_write_reg(adapter, PCIE_SCRATCH_0_REG, (u32)buf_pa)) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", __func__); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_TODEVICE); return -1; } /* Write the upper 32bits of the physical address to scratch * register 1 */ if (mwifiex_write_reg(adapter, PCIE_SCRATCH_1_REG, - (u32)((u64)*buf_pa >> 32))) { + (u32)((u64)buf_pa >> 32))) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", __func__); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_TODEVICE); return -1; } @@ -952,6 +982,8 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) dev_err(adapter->dev, "%s: failed to write command len to scratch reg 2\n", __func__); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_TODEVICE); return -1; } @@ -960,6 +992,8 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) CPU_INTR_DOOR_BELL)) { dev_err(adapter->dev, "%s: failed to assert door-bell intr\n", __func__); + pci_unmap_single(card->dev, buf_pa, + MWIFIEX_UPLD_SIZE, PCI_DMA_TODEVICE); return -1; } @@ -989,8 +1023,8 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; int ret = 0; - phys_addr_t *cmd_buf_pa; - phys_addr_t *cmdrsp_buf_pa; + dma_addr_t cmd_buf_pa, cmdrsp_buf_pa; + u8 *payload = (u8 *)skb->data; if (!(skb->data && skb->len)) { dev_err(adapter->dev, "Invalid parameter in %s <%p, %#x>\n", @@ -1005,17 +1039,18 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -EBUSY; } - /* Make sure a command buffer is available */ - if (!card->cmd_buf) { - dev_err(adapter->dev, "Command buffer not available\n"); - return -EBUSY; - } + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); adapter->cmd_sent = true; - /* Copy the given skb in to DMA accessable shared buffer */ - skb_put(card->cmd_buf, MWIFIEX_SIZE_OF_CMD_BUFFER - card->cmd_buf->len); - skb_trim(card->cmd_buf, skb->len); - memcpy(card->cmd_buf->data, skb->data, skb->len); + + *(__le16 *)&payload[0] = cpu_to_le16((u16)skb->len); + *(__le16 *)&payload[2] = cpu_to_le16(MWIFIEX_TYPE_CMD); + + if (mwifiex_map_pci_memory(adapter, skb, skb->len, PCI_DMA_TODEVICE)) + return -1; + + card->cmd_buf = skb; /* To send a command, the driver will: 1. Write the 64bit physical address of the data buffer to @@ -1028,11 +1063,11 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) */ if (card->cmdrsp_buf) { - cmdrsp_buf_pa = MWIFIEX_SKB_PACB(card->cmdrsp_buf); + MWIFIEX_SKB_PACB(card->cmdrsp_buf, &cmdrsp_buf_pa); /* Write the lower 32bits of the cmdrsp buffer physical address */ if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_LO, - (u32)*cmdrsp_buf_pa)) { + (u32)cmdrsp_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1041,7 +1076,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) /* Write the upper 32bits of the cmdrsp buffer physical address */ if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_HI, - (u32)((u64)*cmdrsp_buf_pa >> 32))) { + (u32)((u64)cmdrsp_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1049,9 +1084,9 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } } - cmd_buf_pa = MWIFIEX_SKB_PACB(card->cmd_buf); + MWIFIEX_SKB_PACB(card->cmd_buf, &cmd_buf_pa); /* Write the lower 32bits of the physical address to REG_CMD_ADDR_LO */ - if (mwifiex_write_reg(adapter, REG_CMD_ADDR_LO, (u32)*cmd_buf_pa)) { + if (mwifiex_write_reg(adapter, REG_CMD_ADDR_LO, (u32)cmd_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1059,7 +1094,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } /* Write the upper 32bits of the physical address to REG_CMD_ADDR_HI */ if (mwifiex_write_reg(adapter, REG_CMD_ADDR_HI, - (u32)((u64)*cmd_buf_pa >> 32))) { + (u32)((u64)cmd_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1098,11 +1133,22 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct sk_buff *skb = card->cmdrsp_buf; int count = 0; + u16 rx_len; + __le16 pkt_len; + dma_addr_t buf_pa; dev_dbg(adapter->dev, "info: Rx CMD Response\n"); + MWIFIEX_SKB_PACB(skb, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE); + + pkt_len = *((__le16 *)skb->data); + rx_len = le16_to_cpu(pkt_len); + skb_trim(skb, rx_len); + skb_pull(skb, INTF_HEADER_LEN); + if (!adapter->curr_cmd) { - skb_pull(skb, INTF_HEADER_LEN); if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); @@ -1115,9 +1161,12 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) } memcpy(adapter->upld_buf, skb->data, min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); - skb_push(skb, INTF_HEADER_LEN); + if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); } else if (mwifiex_pcie_ok_to_access_hw(adapter)) { - skb_pull(skb, INTF_HEADER_LEN); adapter->curr_cmd->resp_skb = skb; adapter->cmd_resp_received = true; /* Take the pointer and set it to CMD node and will @@ -1151,10 +1200,23 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; + dma_addr_t buf_pa; + struct sk_buff *skb_tmp; if (skb) { card->cmdrsp_buf = skb; skb_push(card->cmdrsp_buf, INTF_HEADER_LEN); + if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + } + + skb_tmp = card->cmd_buf; + if (skb_tmp) { + MWIFIEX_SKB_PACB(skb_tmp, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE); + card->cmd_buf = NULL; } return 0; @@ -1168,6 +1230,10 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr, event; + dma_addr_t buf_pa; + + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); if (adapter->event_received) { dev_dbg(adapter->dev, "info: Event being processed, " @@ -1199,6 +1265,10 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) dev_dbg(adapter->dev, "info: Read Index: %d\n", rdptr); skb_cmd = card->evt_buf_list[rdptr]; + MWIFIEX_SKB_PACB(skb_cmd, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE); + /* Take the pointer and set it to event pointer in adapter and will return back after event handling callback */ card->evt_buf_list[rdptr] = NULL; @@ -1243,7 +1313,7 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, int ret = 0; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr; - phys_addr_t *buf_pa; + dma_addr_t buf_pa; if (!skb) return 0; @@ -1263,9 +1333,14 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, if (!card->evt_buf_list[rdptr]) { skb_push(skb, INTF_HEADER_LEN); + if (mwifiex_map_pci_memory(adapter, skb, + MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + MWIFIEX_SKB_PACB(skb, &buf_pa); card->evt_buf_list[rdptr] = skb; - buf_pa = MWIFIEX_SKB_PACB(skb); - card->evtbd_ring[rdptr]->paddr = *buf_pa; + MWIFIEX_SKB_PACB(skb, &buf_pa); + card->evtbd_ring[rdptr]->paddr = buf_pa; card->evtbd_ring[rdptr]->len = (u16)skb->len; card->evtbd_ring[rdptr]->flags = 0; skb = NULL; @@ -1314,11 +1389,8 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, struct sk_buff *skb; u32 txlen, tx_blocks = 0, tries, len; u32 block_retry_cnt = 0; - - if (!adapter) { - pr_err("adapter structure is not valid\n"); - return -1; - } + dma_addr_t buf_pa; + struct pcie_service_card *card = adapter->card; if (!firmware || !firmware_len) { dev_err(adapter->dev, @@ -1340,7 +1412,6 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, ret = -ENOMEM; goto done; } - mwifiex_update_sk_buff_pa(skb); /* Perform firmware data transfer */ do { @@ -1415,6 +1486,9 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, ret = -1; goto done; } + + MWIFIEX_SKB_PACB(skb, &buf_pa); + /* Wait for the command done interrupt */ do { if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS, @@ -1422,11 +1496,17 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, dev_err(adapter->dev, "%s: Failed to read " "interrupt status during fw dnld.\n", __func__); + pci_unmap_single(card->dev, buf_pa, skb->len, + PCI_DMA_TODEVICE); ret = -1; goto done; } } while ((ireg_intr & CPU_INTR_DOOR_BELL) == CPU_INTR_DOOR_BELL); + + pci_unmap_single(card->dev, buf_pa, skb->len, + PCI_DMA_TODEVICE); + offset += txlen; } while (true); @@ -1828,15 +1908,8 @@ static void mwifiex_pcie_cleanup(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct pci_dev *pdev = card->dev; - mwifiex_pcie_delete_sleep_cookie_buf(adapter); - mwifiex_pcie_delete_cmdrsp_buf(adapter); - mwifiex_pcie_delete_evtbd_ring(adapter); - mwifiex_pcie_delete_rxbd_ring(adapter); - mwifiex_pcie_delete_txbd_ring(adapter); - card->cmdrsp_buf = NULL; - - dev_dbg(adapter->dev, "Clearing driver ready signature\n"); if (user_rmmod) { + dev_dbg(adapter->dev, "Clearing driver ready signature\n"); if (mwifiex_write_reg(adapter, REG_DRV_READY, 0x00000000)) dev_err(adapter->dev, "Failed to write driver not-ready signature\n"); @@ -1893,6 +1966,13 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) if (card) { dev_dbg(adapter->dev, "%s(): calling free_irq()\n", __func__); free_irq(card->dev->irq, card->dev); + + mwifiex_pcie_delete_sleep_cookie_buf(adapter); + mwifiex_pcie_delete_cmdrsp_buf(adapter); + mwifiex_pcie_delete_evtbd_ring(adapter); + mwifiex_pcie_delete_rxbd_ring(adapter); + mwifiex_pcie_delete_txbd_ring(adapter); + card->cmdrsp_buf = NULL; } } diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 2f218f9..87201f5 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -118,7 +118,7 @@ struct pcie_service_card { u32 txbd_rdptr; u32 txbd_ring_size; u8 *txbd_ring_vbase; - phys_addr_t txbd_ring_pbase; + dma_addr_t txbd_ring_pbase; struct mwifiex_pcie_buf_desc *txbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *tx_buf_list[MWIFIEX_MAX_TXRX_BD]; @@ -126,7 +126,7 @@ struct pcie_service_card { u32 rxbd_rdptr; u32 rxbd_ring_size; u8 *rxbd_ring_vbase; - phys_addr_t rxbd_ring_pbase; + dma_addr_t rxbd_ring_pbase; struct mwifiex_pcie_buf_desc *rxbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *rx_buf_list[MWIFIEX_MAX_TXRX_BD]; @@ -134,13 +134,14 @@ struct pcie_service_card { u32 evtbd_rdptr; u32 evtbd_ring_size; u8 *evtbd_ring_vbase; - phys_addr_t evtbd_ring_pbase; + dma_addr_t evtbd_ring_pbase; struct mwifiex_pcie_buf_desc *evtbd_ring[MWIFIEX_MAX_EVT_BD]; struct sk_buff *evt_buf_list[MWIFIEX_MAX_EVT_BD]; struct sk_buff *cmd_buf; struct sk_buff *cmdrsp_buf; - struct sk_buff *sleep_cookie; + u8 *sleep_cookie_vbase; + dma_addr_t sleep_cookie_pbase; void __iomem *pci_mmap; void __iomem *pci_mmap1; }; diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c index 5d87195..c460785 100644 --- a/drivers/net/wireless/mwifiex/sta_cmd.c +++ b/drivers/net/wireless/mwifiex/sta_cmd.c @@ -931,7 +931,6 @@ mwifiex_cmd_pcie_host_spec(struct mwifiex_private *priv, struct host_cmd_ds_pcie_details *host_spec = &cmd->params.pcie_host_spec; struct pcie_service_card *card = priv->adapter->card; - phys_addr_t *buf_pa; cmd->command = cpu_to_le16(HostCmd_CMD_PCIE_DESC_DETAILS); cmd->size = cpu_to_le16(sizeof(struct @@ -953,10 +952,11 @@ mwifiex_cmd_pcie_host_spec(struct mwifiex_private *priv, host_spec->evtbd_addr_lo = (u32)(card->evtbd_ring_pbase); host_spec->evtbd_addr_hi = (u32)(((u64)card->evtbd_ring_pbase)>>32); host_spec->evtbd_count = MWIFIEX_MAX_EVT_BD; - if (card->sleep_cookie) { - buf_pa = MWIFIEX_SKB_PACB(card->sleep_cookie); - host_spec->sleep_cookie_addr_lo = (u32) *buf_pa; - host_spec->sleep_cookie_addr_hi = (u32) (((u64)*buf_pa) >> 32); + if (card->sleep_cookie_vbase) { + host_spec->sleep_cookie_addr_lo = + (u32)(card->sleep_cookie_pbase); + host_spec->sleep_cookie_addr_hi = + (u32)(((u64)(card->sleep_cookie_pbase)) >> 32); dev_dbg(priv->adapter->dev, "sleep_cook_lo phy addr: 0x%x\n", host_spec->sleep_cookie_addr_lo); } diff --git a/drivers/net/wireless/mwifiex/util.h b/drivers/net/wireless/mwifiex/util.h index f6d36b9..cb2d058 100644 --- a/drivers/net/wireless/mwifiex/util.h +++ b/drivers/net/wireless/mwifiex/util.h @@ -22,16 +22,16 @@ static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb) { - return (struct mwifiex_rxinfo *)(skb->cb + sizeof(phys_addr_t)); + return (struct mwifiex_rxinfo *)(skb->cb + sizeof(dma_addr_t)); } static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb) { - return (struct mwifiex_txinfo *)(skb->cb + sizeof(phys_addr_t)); + return (struct mwifiex_txinfo *)(skb->cb + sizeof(dma_addr_t)); } -static inline phys_addr_t *MWIFIEX_SKB_PACB(struct sk_buff *skb) +static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb, dma_addr_t *buf_pa) { - return (phys_addr_t *)skb->cb; + memcpy(buf_pa, skb->cb, sizeof(dma_addr_t)); } #endif /* !_MWIFIEX_UTIL_H_ */ -- cgit v0.10.2 From fbd7e7ac6db3db8bccf3210d23b5a2a66471c538 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:31 -0800 Subject: mwifiex: flush TX ring for PCIe after disconnect or bss stop This patch adds handler to clean PCIe TX rings after disconnect or bss stop is called for PCIe based mwifiex driver. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index ef02a5b..51044e3 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -602,6 +602,7 @@ struct mwifiex_if_ops { int (*init_fw_port) (struct mwifiex_adapter *); int (*dnld_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *); void (*card_reset) (struct mwifiex_adapter *); + int (*clean_pcie_ring) (struct mwifiex_adapter *adapter); }; struct mwifiex_adapter { diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index ac20bc4..19b5a83 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -764,6 +764,37 @@ static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) return 0; } +/* This function flushes the TX buffer descriptor ring + * This function defined as handler is also called while cleaning TXRX + * during disconnect/ bss stop. + */ +static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + u32 rdptr; + + /* Read the TX ring read pointer set by firmware */ + if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { + dev_err(adapter->dev, + "Flush TXBD: failed to read REG_TXBD_RDPTR\n"); + return -1; + } + + if (!mwifiex_pcie_txbd_empty(card, rdptr)) { + card->txbd_flush = 1; + /* write pointer already set at last send + * send dnld-rdy intr again, wait for completion. + */ + if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, + CPU_INTR_DNLD_RDY)) { + dev_err(adapter->dev, + "failed to assert dnld-rdy interrupt.\n"); + return -1; + } + } + return 0; +} + /* * This function sends data buffer to device */ @@ -1995,6 +2026,7 @@ static struct mwifiex_if_ops pcie_ops = { .update_mp_end_port = NULL, .cleanup_mpa_buf = NULL, .init_fw_port = mwifiex_pcie_init_fw_port, + .clean_pcie_ring = mwifiex_clean_pcie_ring_buf, }; /* diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 87201f5..24a39b3 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -114,6 +114,7 @@ struct pcie_service_card { struct pci_dev *dev; struct mwifiex_adapter *adapter; + u8 txbd_flush; u32 txbd_wrptr; u32 txbd_rdptr; u32 txbd_ring_size; @@ -146,4 +147,16 @@ struct pcie_service_card { void __iomem *pci_mmap1; }; +static inline int +mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) +{ + if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == + (rdptr & MWIFIEX_TXBD_MASK)) && + ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + return 1; + + return 0; +} + #endif /* _MWIFIEX_PCIE_H */ diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 818f871..6d641cb 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -568,6 +568,8 @@ mwifiex_clean_txrx(struct mwifiex_private *priv) mwifiex_wmm_delete_all_ralist(priv); memcpy(tos_to_tid, ac_to_tid, sizeof(tos_to_tid)); + if (priv->adapter->if_ops.clean_pcie_ring) + priv->adapter->if_ops.clean_pcie_ring(priv->adapter); spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); } -- cgit v0.10.2 From e7f767a7d9f809c494bfffffeda2bbdbfec110b4 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:32 -0800 Subject: mwifiex: use map/unmap APIs in TX and RX to reduce memcpy This patch is an enhacement to mwifiex_pcie driver to use map/unmap PCI memory APIs. This reduces one memcpy each in TX path and RX path, and enhances throughput. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index 68d52cf..af8fe63 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -278,14 +278,16 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); break; case -1: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; dev_err(adapter->dev, "%s: host_to_card failed: %#x\n", __func__, ret); adapter->dbg.num_tx_host_to_card_failure++; mwifiex_write_data_complete(adapter, skb_aggr, 1, ret); return 0; case -EINPROGRESS: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; break; case 0: mwifiex_write_data_complete(adapter, skb_aggr, 1, ret); diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 19b5a83..3da89b4 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -796,15 +796,15 @@ static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) } /* - * This function sends data buffer to device + * This function unmaps and frees downloaded data buffer */ -static int -mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) +static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) { + const u32 num_tx_buffs = MWIFIEX_MAX_TXRX_BD; + struct sk_buff *skb; + dma_addr_t buf_pa; + u32 wrdoneidx, rdptr, unmap_count = 0; struct pcie_service_card *card = adapter->card; - u32 wrindx, rdptr; - phys_addr_t buf_pa; - __le16 *tmp; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -812,34 +812,112 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) /* Read the TX ring read pointer set by firmware */ if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { dev_err(adapter->dev, - "SEND DATA: failed to read REG_TXBD_RDPTR\n"); + "SEND COMP: failed to read REG_TXBD_RDPTR\n"); return -1; } - wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK; + dev_dbg(adapter->dev, "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n", + card->txbd_rdptr, rdptr); - dev_dbg(adapter->dev, "info: SEND DATA: \n", rdptr, - card->txbd_wrptr); - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) != - (rdptr & MWIFIEX_TXBD_MASK)) || - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { - struct sk_buff *skb_data; + /* free from previous txbd_rdptr to current txbd_rdptr */ + while (((card->txbd_rdptr & MWIFIEX_TXBD_MASK) != + (rdptr & MWIFIEX_TXBD_MASK)) || + ((card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { + wrdoneidx = card->txbd_rdptr & MWIFIEX_TXBD_MASK; + + skb = card->tx_buf_list[wrdoneidx]; + if (skb) { + dev_dbg(adapter->dev, + "SEND COMP: Detach skb %p at txbd_rdidx=%d\n", + skb, wrdoneidx); + MWIFIEX_SKB_PACB(skb, &buf_pa); + pci_unmap_single(card->dev, buf_pa, skb->len, + PCI_DMA_TODEVICE); + + unmap_count++; + + if (card->txbd_flush) + mwifiex_write_data_complete(adapter, skb, 0, + -1); + else + mwifiex_write_data_complete(adapter, skb, 0, 0); + } + + card->tx_buf_list[wrdoneidx] = NULL; + card->txbd_ring[wrdoneidx]->paddr = 0; + card->rxbd_ring[wrdoneidx]->len = 0; + card->rxbd_ring[wrdoneidx]->flags = 0; + card->txbd_rdptr++; + + if ((card->txbd_rdptr & MWIFIEX_TXBD_MASK) == num_tx_buffs) + card->txbd_rdptr = ((card->txbd_rdptr & + MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ + MWIFIEX_BD_FLAG_ROLLOVER_IND); + } + + if (unmap_count) + adapter->data_sent = false; + + if (card->txbd_flush) { + if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == + (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) && + ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + card->txbd_flush = 0; + else + mwifiex_clean_pcie_ring_buf(adapter); + } + + return 0; +} + +/* This function sends data buffer to device. First 4 bytes of payload + * are filled with payload length and payload type. Then this payload + * is mapped to PCI device memory. Tx ring pointers are advanced accordingly. + * Download ready interrupt to FW is deffered if Tx ring is not full and + * additional payload can be accomodated. + */ +static int +mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, + struct mwifiex_tx_param *tx_param) +{ + struct pcie_service_card *card = adapter->card; + u32 wrindx; + int ret; + dma_addr_t buf_pa; + __le16 *tmp; + + if (!(skb->data && skb->len)) { + dev_err(adapter->dev, "%s(): invalid parameter <%p, %#x>\n", + __func__, skb->data, skb->len); + return -1; + } + + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); + + dev_dbg(adapter->dev, "info: SEND DATA: \n", + card->txbd_rdptr, card->txbd_wrptr); + if (mwifiex_pcie_txbd_not_full(card)) { u8 *payload; adapter->data_sent = true; - skb_data = card->tx_buf_list[wrindx]; - memcpy(skb_data->data, skb->data, skb->len); - payload = skb_data->data; + payload = skb->data; tmp = (__le16 *)&payload[0]; *tmp = cpu_to_le16((u16)skb->len); tmp = (__le16 *)&payload[2]; *tmp = cpu_to_le16(MWIFIEX_TYPE_DATA); - skb_put(skb_data, MWIFIEX_RX_DATA_BUF_SIZE - skb_data->len); - skb_trim(skb_data, skb->len); - MWIFIEX_SKB_PACB(skb_data, &buf_pa); + + if (mwifiex_map_pci_memory(adapter, skb, skb->len , + PCI_DMA_TODEVICE)) + return -1; + + wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK; + MWIFIEX_SKB_PACB(skb, &buf_pa); + card->tx_buf_list[wrindx] = skb; card->txbd_ring[wrindx]->paddr = buf_pa; - card->txbd_ring[wrindx]->len = (u16)skb_data->len; + card->txbd_ring[wrindx]->len = (u16)skb->len; card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | MWIFIEX_BD_FLAG_LAST_DESC; @@ -854,19 +932,28 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) card->txbd_wrptr)) { dev_err(adapter->dev, "SEND DATA: failed to write REG_TXBD_WRPTR\n"); - return 0; + ret = -1; + goto done_unmap; } - - /* Send the TX ready interrupt */ - if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, - CPU_INTR_DNLD_RDY)) { - dev_err(adapter->dev, - "SEND DATA: failed to assert door-bell intr\n"); - return -1; + if ((mwifiex_pcie_txbd_not_full(card)) && + tx_param->next_pkt_len) { + /* have more packets and TxBD still can hold more */ + dev_dbg(adapter->dev, + "SEND DATA: delay dnld-rdy interrupt.\n"); + adapter->data_sent = false; + } else { + /* Send the TX ready interrupt */ + if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, + CPU_INTR_DNLD_RDY)) { + dev_err(adapter->dev, + "SEND DATA: failed to assert dnld-rdy interrupt.\n"); + ret = -1; + goto done_unmap; + } } dev_dbg(adapter->dev, "info: SEND DATA: Updated and sent packet to firmware successfully\n", - rdptr, card->txbd_wrptr); + card->txbd_rdptr, card->txbd_wrptr); } else { dev_dbg(adapter->dev, "info: TX Ring full, can't send packets to fw\n"); @@ -879,7 +966,15 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -EBUSY; } - return 0; + return -EINPROGRESS; +done_unmap: + MWIFIEX_SKB_PACB(skb, &buf_pa); + pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE); + card->tx_buf_list[wrindx] = NULL; + card->txbd_ring[wrindx]->paddr = 0; + card->txbd_ring[wrindx]->len = 0; + card->txbd_ring[wrindx]->flags = 0; + return ret; } /* @@ -890,9 +985,13 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; u32 wrptr, rd_index; + dma_addr_t buf_pa; int ret = 0; struct sk_buff *skb_tmp = NULL; + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); + /* Read the RX ring Write pointer set by firmware */ if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) { dev_err(adapter->dev, @@ -900,6 +999,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) ret = -1; goto done; } + card->rxbd_wrptr = wrptr; while (((wrptr & MWIFIEX_RXBD_MASK) != (card->rxbd_rdptr & MWIFIEX_RXBD_MASK)) || @@ -907,27 +1007,50 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) (card->rxbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { struct sk_buff *skb_data; u16 rx_len; + __le16 pkt_len; rd_index = card->rxbd_rdptr & MWIFIEX_RXBD_MASK; skb_data = card->rx_buf_list[rd_index]; + MWIFIEX_SKB_PACB(skb_data, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE); + card->rx_buf_list[rd_index] = NULL; + /* Get data length from interface header - - first byte is len, second byte is type */ - rx_len = *((u16 *)skb_data->data); + * first 2 bytes for len, next 2 bytes is for type + */ + pkt_len = *((__le16 *)skb_data->data); + rx_len = le16_to_cpu(pkt_len); + skb_put(skb_data, rx_len); dev_dbg(adapter->dev, "info: RECV DATA: Rd=%#x, Wr=%#x, Len=%d\n", card->rxbd_rdptr, wrptr, rx_len); - skb_tmp = dev_alloc_skb(rx_len); + skb_pull(skb_data, INTF_HEADER_LEN); + mwifiex_handle_rx_packet(adapter, skb_data); + + skb_tmp = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); if (!skb_tmp) { - dev_dbg(adapter->dev, - "info: Failed to alloc skb for RX\n"); - ret = -EBUSY; - goto done; + dev_err(adapter->dev, + "Unable to allocate skb.\n"); + return -ENOMEM; } - skb_put(skb_tmp, rx_len); + if (mwifiex_map_pci_memory(adapter, skb_tmp, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb_tmp, &buf_pa); + + dev_dbg(adapter->dev, + "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", + skb_tmp, rd_index); + card->rx_buf_list[rd_index] = skb_tmp; + card->rxbd_ring[rd_index]->paddr = buf_pa; + card->rxbd_ring[rd_index]->len = skb_tmp->len; + card->rxbd_ring[rd_index]->flags = 0; - memcpy(skb_tmp->data, skb_data->data + INTF_HEADER_LEN, rx_len); if ((++card->rxbd_rdptr & MWIFIEX_RXBD_MASK) == MWIFIEX_MAX_TXRX_BD) { card->rxbd_rdptr = ((card->rxbd_rdptr & @@ -955,12 +1078,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) } dev_dbg(adapter->dev, "info: RECV DATA: Rcvd packet from fw successfully\n"); - mwifiex_handle_rx_packet(adapter, skb_tmp); + card->rxbd_wrptr = wrptr; } done: - if (ret && skb_tmp) - dev_kfree_skb_any(skb_tmp); return ret; } @@ -1732,10 +1853,10 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) while (pcie_ireg & HOST_INTR_MASK) { if (pcie_ireg & HOST_INTR_DNLD_DONE) { pcie_ireg &= ~HOST_INTR_DNLD_DONE; - if (adapter->data_sent) { - dev_dbg(adapter->dev, "info: DATA sent intr\n"); - adapter->data_sent = false; - } + dev_dbg(adapter->dev, "info: TX DNLD Done\n"); + ret = mwifiex_pcie_send_data_complete(adapter); + if (ret) + return ret; } if (pcie_ireg & HOST_INTR_UPLD_RDY) { pcie_ireg &= ~HOST_INTR_UPLD_RDY; @@ -1812,7 +1933,7 @@ static int mwifiex_pcie_host_to_card(struct mwifiex_adapter *adapter, u8 type, } if (type == MWIFIEX_TYPE_DATA) - return mwifiex_pcie_send_data(adapter, skb); + return mwifiex_pcie_send_data(adapter, skb, tx_param); else if (type == MWIFIEX_TYPE_CMD) return mwifiex_pcie_send_cmd(adapter, skb); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 24a39b3..37eeb2c 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -159,4 +159,15 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) return 0; } +static inline int +mwifiex_pcie_txbd_not_full(struct pcie_service_card *card) +{ + if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) != + (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) || + ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + return 1; + + return 0; +} #endif /* _MWIFIEX_PCIE_H */ diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c index 8c80024..296faec 100644 --- a/drivers/net/wireless/mwifiex/txrx.c +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -117,14 +117,16 @@ int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb, dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); break; case -1: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; dev_err(adapter->dev, "mwifiex_write_data_async failed: 0x%X\n", ret); adapter->dbg.num_tx_host_to_card_failure++; mwifiex_write_data_complete(adapter, skb, 0, ret); break; case -EINPROGRESS: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; break; case 0: mwifiex_write_data_complete(adapter, skb, 0, ret); diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 6d641cb..135d96d 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -1208,13 +1208,15 @@ mwifiex_send_processed_packet(struct mwifiex_private *priv, ra_list_flags); break; case -1: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; dev_err(adapter->dev, "host_to_card failed: %#x\n", ret); adapter->dbg.num_tx_host_to_card_failure++; mwifiex_write_data_complete(adapter, skb, 0, ret); break; case -EINPROGRESS: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; default: break; } -- cgit v0.10.2 From 428ac43f77404d28b215bb63a7e52d230014b0f0 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 6 Jan 2013 13:34:49 +0000 Subject: chelsio: Use netdev_ and pr_ Use more current logging styles. Convert printks to pr_ and printks with ("%s: ...", dev->name to netdev_(dev, "... Add pr_fmt #defines where appropriate. Coalesce formats. Use pr__once where appropriate. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c index c8fdeaa..20d2085 100644 --- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c +++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c @@ -131,7 +131,7 @@ static void t1_set_rxmode(struct net_device *dev) static void link_report(struct port_info *p) { if (!netif_carrier_ok(p->dev)) - printk(KERN_INFO "%s: link down\n", p->dev->name); + netdev_info(p->dev, "link down\n"); else { const char *s = "10Mbps"; @@ -141,9 +141,9 @@ static void link_report(struct port_info *p) case SPEED_100: s = "100Mbps"; break; } - printk(KERN_INFO "%s: link up, %s, %s-duplex\n", - p->dev->name, s, - p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + netdev_info(p->dev, "link up, %s, %s-duplex\n", + s, p->link_config.duplex == DUPLEX_FULL + ? "full" : "half"); } } @@ -976,19 +976,13 @@ static const struct net_device_ops cxgb_netdev_ops = { static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - static int version_printed; - int i, err, pci_using_dac = 0; unsigned long mmio_start, mmio_len; const struct board_info *bi; struct adapter *adapter = NULL; struct port_info *pi; - if (!version_printed) { - printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, - DRV_VERSION); - ++version_printed; - } + pr_info_once("%s - version %s\n", DRV_DESCRIPTION, DRV_VERSION); err = pci_enable_device(pdev); if (err) @@ -1124,8 +1118,8 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < bi->port_number; ++i) { err = register_netdev(adapter->port[i].dev); if (err) - pr_warning("%s: cannot register net device %s, skipping\n", - pci_name(pdev), adapter->port[i].dev->name); + pr_warn("%s: cannot register net device %s, skipping\n", + pci_name(pdev), adapter->port[i].dev->name); else { /* * Change the name we use for messages to the name of @@ -1143,10 +1137,10 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto out_release_adapter_res; } - printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name, - bi->desc, adapter->params.chip_revision, - adapter->params.pci.is_pcix ? "PCIX" : "PCI", - adapter->params.pci.speed, adapter->params.pci.width); + pr_info("%s: %s (rev %d), %s %dMHz/%d-bit\n", + adapter->name, bi->desc, adapter->params.chip_revision, + adapter->params.pci.is_pcix ? "PCIX" : "PCI", + adapter->params.pci.speed, adapter->params.pci.width); /* * Set the T1B ASIC and memory clocks. diff --git a/drivers/net/ethernet/chelsio/cxgb/sge.c b/drivers/net/ethernet/chelsio/cxgb/sge.c index d84872e..4829769 100644 --- a/drivers/net/ethernet/chelsio/cxgb/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb/sge.c @@ -1822,8 +1822,8 @@ netdev_tx_t t1_start_xmit(struct sk_buff *skb, struct net_device *dev) */ if (unlikely(skb->len < ETH_HLEN || skb->len > dev->mtu + eth_hdr_len(skb->data))) { - pr_debug("%s: packet size %d hdr %d mtu%d\n", dev->name, - skb->len, eth_hdr_len(skb->data), dev->mtu); + netdev_dbg(dev, "packet size %d hdr %d mtu%d\n", + skb->len, eth_hdr_len(skb->data), dev->mtu); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -1831,7 +1831,7 @@ netdev_tx_t t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb->ip_summed == CHECKSUM_PARTIAL && ip_hdr(skb)->protocol == IPPROTO_UDP) { if (unlikely(skb_checksum_help(skb))) { - pr_debug("%s: unable to do udp checksum\n", dev->name); + netdev_dbg(dev, "unable to do udp checksum\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index f15ee32..2b5e621 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -29,6 +29,9 @@ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -153,7 +156,7 @@ struct workqueue_struct *cxgb3_wq; static void link_report(struct net_device *dev) { if (!netif_carrier_ok(dev)) - printk(KERN_INFO "%s: link down\n", dev->name); + netdev_info(dev, "link down\n"); else { const char *s = "10Mbps"; const struct port_info *p = netdev_priv(dev); @@ -170,8 +173,9 @@ static void link_report(struct net_device *dev) break; } - printk(KERN_INFO "%s: link up, %s, %s-duplex\n", dev->name, s, - p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + netdev_info(dev, "link up, %s, %s-duplex\n", + s, p->link_config.duplex == DUPLEX_FULL + ? "full" : "half"); } } @@ -318,10 +322,10 @@ void t3_os_phymod_changed(struct adapter *adap, int port_id) const struct port_info *pi = netdev_priv(dev); if (pi->phy.modtype == phy_modtype_none) - printk(KERN_INFO "%s: PHY module unplugged\n", dev->name); + netdev_info(dev, "PHY module unplugged\n"); else - printk(KERN_INFO "%s: %s PHY module inserted\n", dev->name, - mod_str[pi->phy.modtype]); + netdev_info(dev, "%s PHY module inserted\n", + mod_str[pi->phy.modtype]); } static void cxgb_set_rxmode(struct net_device *dev) @@ -1422,8 +1426,7 @@ static int cxgb_open(struct net_device *dev) if (is_offload(adapter) && !ofld_disable) { err = offload_open(dev); if (err) - printk(KERN_WARNING - "Could not initialize offload capabilities\n"); + pr_warn("Could not initialize offload capabilities\n"); } netif_set_real_num_tx_queues(dev, pi->nqsets); @@ -3132,14 +3135,13 @@ static void print_port_info(struct adapter *adap, const struct adapter_info *ai) if (!test_bit(i, &adap->registered_device_map)) continue; - printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n", - dev->name, ai->desc, pi->phy.desc, - is_offload(adap) ? "R" : "", adap->params.rev, buf, - (adap->flags & USING_MSIX) ? " MSI-X" : - (adap->flags & USING_MSI) ? " MSI" : ""); + netdev_info(dev, "%s %s %sNIC (rev %d) %s%s\n", + ai->desc, pi->phy.desc, + is_offload(adap) ? "R" : "", adap->params.rev, buf, + (adap->flags & USING_MSIX) ? " MSI-X" : + (adap->flags & USING_MSI) ? " MSI" : ""); if (adap->name == dev->name && adap->params.vpd.mclk) - printk(KERN_INFO - "%s: %uMB CM, %uMB PMTX, %uMB PMRX, S/N: %s\n", + pr_info("%s: %uMB CM, %uMB PMTX, %uMB PMRX, S/N: %s\n", adap->name, t3_mc7_size(&adap->cm) >> 20, t3_mc7_size(&adap->pmtx) >> 20, t3_mc7_size(&adap->pmrx) >> 20, @@ -3177,24 +3179,18 @@ static void cxgb3_init_iscsi_mac(struct net_device *dev) NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA) static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - static int version_printed; - int i, err, pci_using_dac = 0; resource_size_t mmio_start, mmio_len; const struct adapter_info *ai; struct adapter *adapter = NULL; struct port_info *pi; - if (!version_printed) { - printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); - ++version_printed; - } + pr_info_once("%s - version %s\n", DRV_DESC, DRV_VERSION); if (!cxgb3_wq) { cxgb3_wq = create_singlethread_workqueue(DRV_NAME); if (!cxgb3_wq) { - printk(KERN_ERR DRV_NAME - ": cannot initialize work queue\n"); + pr_err("cannot initialize work queue\n"); return -ENOMEM; } } diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c index 3f1f501..91d02eb 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c @@ -30,6 +30,8 @@ * SOFTWARE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -235,8 +237,7 @@ static int cxgb_ulp_iscsi_ctl(struct adapter *adapter, unsigned int req, if ((val >> S_MAXRXDATA) != 0x3f60) { val &= (M_RXCOALESCESIZE << S_RXCOALESCESIZE); val |= V_MAXRXDATA(0x3f60); - printk(KERN_INFO - "%s, iscsi set MaxRxData to 16224 (0x%x).\n", + pr_info("%s, iscsi set MaxRxData to 16224 (0x%x)\n", adapter->name, val); t3_write_reg(adapter, A_TP_PARA_REG2, val); } @@ -256,8 +257,7 @@ static int cxgb_ulp_iscsi_ctl(struct adapter *adapter, unsigned int req, for (i = 0; i < 4; i++) val |= (uiip->pgsz_factor[i] & 0xF) << (8 * i); if (val && (val != t3_read_reg(adapter, A_ULPRX_ISCSI_PSZ))) { - printk(KERN_INFO - "%s, setting iscsi pgsz 0x%x, %u,%u,%u,%u.\n", + pr_info("%s, setting iscsi pgsz 0x%x, %u,%u,%u,%u\n", adapter->name, val, uiip->pgsz_factor[0], uiip->pgsz_factor[1], uiip->pgsz_factor[2], uiip->pgsz_factor[3]); @@ -709,8 +709,7 @@ static int do_smt_write_rpl(struct t3cdev *dev, struct sk_buff *skb) struct cpl_smt_write_rpl *rpl = cplhdr(skb); if (rpl->status != CPL_ERR_NONE) - printk(KERN_ERR - "Unexpected SMT_WRITE_RPL status %u for entry %u\n", + pr_err("Unexpected SMT_WRITE_RPL status %u for entry %u\n", rpl->status, GET_TID(rpl)); return CPL_RET_BUF_DONE; @@ -721,8 +720,7 @@ static int do_l2t_write_rpl(struct t3cdev *dev, struct sk_buff *skb) struct cpl_l2t_write_rpl *rpl = cplhdr(skb); if (rpl->status != CPL_ERR_NONE) - printk(KERN_ERR - "Unexpected L2T_WRITE_RPL status %u for entry %u\n", + pr_err("Unexpected L2T_WRITE_RPL status %u for entry %u\n", rpl->status, GET_TID(rpl)); return CPL_RET_BUF_DONE; @@ -733,8 +731,7 @@ static int do_rte_write_rpl(struct t3cdev *dev, struct sk_buff *skb) struct cpl_rte_write_rpl *rpl = cplhdr(skb); if (rpl->status != CPL_ERR_NONE) - printk(KERN_ERR - "Unexpected RTE_WRITE_RPL status %u for entry %u\n", + pr_err("Unexpected RTE_WRITE_RPL status %u for entry %u\n", rpl->status, GET_TID(rpl)); return CPL_RET_BUF_DONE; @@ -754,7 +751,7 @@ static int do_act_open_rpl(struct t3cdev *dev, struct sk_buff *skb) t3c_tid-> ctx); } else { - printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + pr_err("%s: received clientless CPL command 0x%x\n", dev->name, CPL_ACT_OPEN_RPL); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -772,7 +769,7 @@ static int do_stid_rpl(struct t3cdev *dev, struct sk_buff *skb) return t3c_tid->client->handlers[p->opcode] (dev, skb, t3c_tid->ctx); } else { - printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + pr_err("%s: received clientless CPL command 0x%x\n", dev->name, p->opcode); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -790,7 +787,7 @@ static int do_hwtid_rpl(struct t3cdev *dev, struct sk_buff *skb) return t3c_tid->client->handlers[p->opcode] (dev, skb, t3c_tid->ctx); } else { - printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + pr_err("%s: received clientless CPL command 0x%x\n", dev->name, p->opcode); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -817,7 +814,7 @@ static int do_cr(struct t3cdev *dev, struct sk_buff *skb) return t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ] (dev, skb, t3c_tid->ctx); } else { - printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + pr_err("%s: received clientless CPL command 0x%x\n", dev->name, CPL_PASS_ACCEPT_REQ); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -911,7 +908,7 @@ static int do_act_establish(struct t3cdev *dev, struct sk_buff *skb) return t3c_tid->client->handlers[CPL_ACT_ESTABLISH] (dev, skb, t3c_tid->ctx); } else { - printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + pr_err("%s: received clientless CPL command 0x%x\n", dev->name, CPL_ACT_ESTABLISH); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -957,7 +954,7 @@ static int do_term(struct t3cdev *dev, struct sk_buff *skb) return t3c_tid->client->handlers[opcode] (dev, skb, t3c_tid->ctx); } else { - printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + pr_err("%s: received clientless CPL command 0x%x\n", dev->name, opcode); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -994,8 +991,7 @@ static struct notifier_block nb = { */ static int do_bad_cpl(struct t3cdev *dev, struct sk_buff *skb) { - printk(KERN_ERR "%s: received bad CPL command 0x%x\n", dev->name, - *skb->data); + pr_err("%s: received bad CPL command 0x%x\n", dev->name, *skb->data); return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; } @@ -1013,8 +1009,8 @@ void t3_register_cpl_handler(unsigned int opcode, cpl_handler_func h) if (opcode < NUM_CPL_CMDS) cpl_handlers[opcode] = h ? h : do_bad_cpl; else - printk(KERN_ERR "T3C: handler registration for " - "opcode %x failed\n", opcode); + pr_err("T3C: handler registration for opcode %x failed\n", + opcode); } EXPORT_SYMBOL(t3_register_cpl_handler); @@ -1033,9 +1029,8 @@ static int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n) if (ret & CPL_RET_UNKNOWN_TID) { union opcode_tid *p = cplhdr(skb); - printk(KERN_ERR "%s: CPL message (opcode %u) had " - "unknown TID %u\n", dev->name, opcode, - G_TID(ntohl(p->opcode_tid))); + pr_err("%s: CPL message (opcode %u) had unknown TID %u\n", + dev->name, opcode, G_TID(ntohl(p->opcode_tid))); } #endif if (ret & CPL_RET_BUF_DONE) @@ -1099,7 +1094,7 @@ static void set_l2t_ix(struct t3cdev *tdev, u32 tid, struct l2t_entry *e) skb = alloc_skb(sizeof(*req), GFP_ATOMIC); if (!skb) { - printk(KERN_ERR "%s: cannot allocate skb!\n", __func__); + pr_err("%s: cannot allocate skb!\n", __func__); return; } skb->priority = CPL_PRIORITY_CONTROL; @@ -1132,23 +1127,22 @@ static void cxgb_redirect(struct dst_entry *old, struct neighbour *old_neigh, if (!is_offloading(olddev)) return; if (!is_offloading(newdev)) { - printk(KERN_WARNING "%s: Redirect to non-offload " - "device ignored.\n", __func__); + pr_warn("%s: Redirect to non-offload device ignored\n", + __func__); return; } tdev = dev2t3cdev(olddev); BUG_ON(!tdev); if (tdev != dev2t3cdev(newdev)) { - printk(KERN_WARNING "%s: Redirect to different " - "offload device ignored.\n", __func__); + pr_warn("%s: Redirect to different offload device ignored\n", + __func__); return; } /* Add new L2T entry */ e = t3_l2t_get(tdev, new, newdev, daddr); if (!e) { - printk(KERN_ERR "%s: couldn't allocate new l2t entry!\n", - __func__); + pr_err("%s: couldn't allocate new l2t entry!\n", __func__); return; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index f0718e1..aa63b66 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5131,7 +5131,7 @@ static int __init cxgb4_init_module(void) /* Debugfs support is optional, just warn if this fails */ cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); if (!cxgb4_debugfs_root) - pr_warning("could not create debugfs entry, continuing\n"); + pr_warn("could not create debugfs entry, continuing\n"); ret = pci_register_driver(&cxgb4_driver); if (ret < 0) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index 0188df7..56b46ab 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -33,6 +33,8 @@ * SOFTWARE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -196,11 +198,10 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) break; } - printk(KERN_INFO "%s: link up, %s, full-duplex, %s PAUSE\n", - dev->name, s, fc); + netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s, fc); } else { netif_carrier_off(dev); - printk(KERN_INFO "%s: link down\n", dev->name); + netdev_info(dev, "link down\n"); } } @@ -2465,8 +2466,6 @@ static const struct net_device_ops cxgb4vf_netdev_ops = { static int cxgb4vf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - static int version_printed; - int pci_using_dac; int err, pidx; unsigned int pmask; @@ -2478,10 +2477,7 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, * Print our driver banner the first time we're called to initialize a * device. */ - if (version_printed == 0) { - printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); - version_printed = 1; - } + pr_info_once("%s - version %s\n", DRV_DESC, DRV_VERSION); /* * Initialize generic PCI device state. @@ -2920,18 +2916,15 @@ static int __init cxgb4vf_module_init(void) * Vet our module parameters. */ if (msi != MSI_MSIX && msi != MSI_MSI) { - printk(KERN_WARNING KBUILD_MODNAME - ": bad module parameter msi=%d; must be %d" - " (MSI-X or MSI) or %d (MSI)\n", - msi, MSI_MSIX, MSI_MSI); + pr_warn("bad module parameter msi=%d; must be %d (MSI-X or MSI) or %d (MSI)\n", + msi, MSI_MSIX, MSI_MSI); return -EINVAL; } /* Debugfs support is optional, just warn if this fails */ cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); if (IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) - printk(KERN_WARNING KBUILD_MODNAME ": could not create" - " debugfs entry, continuing\n"); + pr_warn("could not create debugfs entry, continuing\n"); ret = pci_register_driver(&cxgb4vf_driver); if (ret < 0 && !IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) -- cgit v0.10.2 From d0e2c55e7c940a3ee91e9e23a2683b593690f1e9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 4 Jan 2013 15:42:40 +0000 Subject: veth: avoid a NULL deref in veth_stats_one commit 2681128f0ced8a (veth: extend device features) added a NULL deref in veth_stats_one(), as veth_get_stats64() was not testing if the peer device was setup or not. At init time, we call dev_get_stats() before veth pair is fully setup. [ 178.854758] [] veth_get_stats64+0x47/0x70 [veth] [ 178.861013] [] dev_get_stats+0x6d/0x130 [ 178.866486] [] rtnl_fill_ifinfo+0x47c/0x930 [ 178.872299] [] rtmsg_ifinfo+0x83/0x100 [ 178.877678] [] rtnl_configure_link+0x76/0xa0 [ 178.883580] [] veth_newlink+0x16a/0x350 [veth] [ 178.889654] [] rtnl_newlink+0x4dc/0x5e0 [ 178.895128] [] ? rtnl_newlink+0x12e/0x5e0 [ 178.900769] [] rtnetlink_rcv_msg+0x11d/0x310 [ 178.906669] [] ? __rtnl_unlock+0x20/0x20 [ 178.912225] [] netlink_rcv_skb+0xa9/0xd0 [ 178.917779] [] rtnetlink_rcv+0x25/0x40 [ 178.923159] [] netlink_unicast+0x1b1/0x230 [ 178.928887] [] netlink_sendmsg+0x2fe/0x3b0 [ 178.934615] [] sock_sendmsg+0xd2/0xf0 So we must check if peer was setup in veth_get_stats64() As pointed out by Ben Hutchings, priv->peer is missing proper synchronization. Adding RCU protection is a safe and well documented way to make sure we don't access about to be freed or already freed data. Reported-by: Tom Parkin Signed-off-by: Eric Dumazet CC: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 8b2e112..0f71a4f 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -32,7 +32,7 @@ struct pcpu_vstats { }; struct veth_priv { - struct net_device *peer; + struct net_device __rcu *peer; atomic64_t dropped; }; @@ -89,10 +89,10 @@ static int veth_get_sset_count(struct net_device *dev, int sset) static void veth_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data) { - struct veth_priv *priv; + struct veth_priv *priv = netdev_priv(dev); + struct net_device *peer = rtnl_dereference(priv->peer); - priv = netdev_priv(dev); - data[0] = priv->peer->ifindex; + data[0] = peer ? peer->ifindex : 0; } static const struct ethtool_ops veth_ethtool_ops = { @@ -107,9 +107,15 @@ static const struct ethtool_ops veth_ethtool_ops = { static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) { struct veth_priv *priv = netdev_priv(dev); - struct net_device *rcv = priv->peer; + struct net_device *rcv; int length = skb->len; + rcu_read_lock(); + rcv = rcu_dereference(priv->peer); + if (unlikely(!rcv)) { + kfree_skb(skb); + goto drop; + } /* don't change ip_summed == CHECKSUM_PARTIAL, as that * will cause bad checksum on forwarded packets */ @@ -125,9 +131,10 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) stats->packets++; u64_stats_update_end(&stats->syncp); } else { +drop: atomic64_inc(&priv->dropped); } - + rcu_read_unlock(); return NETDEV_TX_OK; } @@ -162,30 +169,36 @@ static struct rtnl_link_stats64 *veth_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *tot) { struct veth_priv *priv = netdev_priv(dev); + struct net_device *peer; struct pcpu_vstats one; tot->tx_dropped = veth_stats_one(&one, dev); tot->tx_bytes = one.bytes; tot->tx_packets = one.packets; - tot->rx_dropped = veth_stats_one(&one, priv->peer); - tot->rx_bytes = one.bytes; - tot->rx_packets = one.packets; + rcu_read_lock(); + peer = rcu_dereference(priv->peer); + if (peer) { + tot->rx_dropped = veth_stats_one(&one, peer); + tot->rx_bytes = one.bytes; + tot->rx_packets = one.packets; + } + rcu_read_unlock(); return tot; } static int veth_open(struct net_device *dev) { - struct veth_priv *priv; + struct veth_priv *priv = netdev_priv(dev); + struct net_device *peer = rtnl_dereference(priv->peer); - priv = netdev_priv(dev); - if (priv->peer == NULL) + if (!peer) return -ENOTCONN; - if (priv->peer->flags & IFF_UP) { + if (peer->flags & IFF_UP) { netif_carrier_on(dev); - netif_carrier_on(priv->peer); + netif_carrier_on(peer); } return 0; } @@ -195,7 +208,7 @@ static int veth_close(struct net_device *dev) struct veth_priv *priv = netdev_priv(dev); netif_carrier_off(dev); - netif_carrier_off(priv->peer); + netif_carrier_off(rtnl_dereference(priv->peer)); return 0; } @@ -380,10 +393,10 @@ static int veth_newlink(struct net *src_net, struct net_device *dev, */ priv = netdev_priv(dev); - priv->peer = peer; + rcu_assign_pointer(priv->peer, peer); priv = netdev_priv(peer); - priv->peer = dev; + rcu_assign_pointer(priv->peer, dev); return 0; err_register_dev: @@ -404,7 +417,16 @@ static void veth_dellink(struct net_device *dev, struct list_head *head) struct net_device *peer; priv = netdev_priv(dev); - peer = priv->peer; + peer = rtnl_dereference(priv->peer); + + /* Note : dellink() is called from default_device_exit_batch(), + * before a rcu_synchronize() point. The devices are guaranteed + * not being freed before one RCU grace period. + */ + RCU_INIT_POINTER(priv->peer, NULL); + + priv = netdev_priv(peer); + RCU_INIT_POINTER(priv->peer, NULL); unregister_netdevice_queue(dev, head); unregister_netdevice_queue(peer, head); -- cgit v0.10.2 From 5ebae4897146ea770069fe8046b30f55a37a9518 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Sun, 6 Jan 2013 16:25:07 +0000 Subject: net: fec: report correct hardware stamping info to ethtool Report correct hardware stamping capability by ethtool interface. The v1.0 ptp4l check it. Signed-off-by: Frank Li Acked-by: Sascha Hauer Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 0a9748b..6dc2094 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1174,12 +1174,41 @@ static void fec_enet_get_drvinfo(struct net_device *ndev, strlcpy(info->bus_info, dev_name(&ndev->dev), sizeof(info->bus_info)); } +static int fec_enet_get_ts_info(struct net_device *ndev, + struct ethtool_ts_info *info) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + if (fep->bufdesc_ex) { + + info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + if (fep->ptp_clock) + info->phc_index = ptp_clock_index(fep->ptp_clock); + else + info->phc_index = -1; + + info->tx_types = (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_ALL); + return 0; + } else { + return ethtool_op_get_ts_info(ndev, info); + } +} + static const struct ethtool_ops fec_enet_ethtool_ops = { .get_settings = fec_enet_get_settings, .set_settings = fec_enet_set_settings, .get_drvinfo = fec_enet_get_drvinfo, .get_link = ethtool_op_get_link, - .get_ts_info = ethtool_op_get_ts_info, + .get_ts_info = fec_enet_get_ts_info, }; static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) -- cgit v0.10.2 From 6411280ac94db94a09770807d3871d2661803604 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Mon, 7 Jan 2013 00:50:23 +0000 Subject: bnx2x: Segregate SR-IOV code In this patch the SR-IOV code is segregated from the main bulk of the bnx2x code. The CONFIG_BNX2X_SRIOV define is added to Broadcom's Kconfig, and allows the elision of the building of all the SR-IOV support code in the driver. The define is dependant on the kernel CONFIG_PCI_IOV configuration define. Signed-off-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index f552673..3b3bf0d 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -121,4 +121,13 @@ config BNX2X To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. +config BNX2X_SRIOV + bool "Broadcom 578xx and 57712 SR-IOV support" + depends on BNX2X && PCI_IOV + default y + ---help--- + This configuration parameter enables Single Root Input Output + Virtualization support in the 578xx and 57712 products. This + allows for virtual function acceleration in virtual environments. + endif # NET_VENDOR_BROADCOM diff --git a/drivers/net/ethernet/broadcom/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile index 2ef6803..116762d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/Makefile +++ b/drivers/net/ethernet/broadcom/bnx2x/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_BNX2X) += bnx2x.o -bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_vfpf.o bnx2x_sriov.o +bnx2x-y := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o +bnx2x-$(CONFIG_BNX2X_SRIOV) += bnx2x_vfpf.o bnx2x_sriov.o diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 8596917..02c93e3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1266,6 +1266,7 @@ struct bnx2x { (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) #define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) +#ifdef CONFIG_BNX2X_SRIOV /* vf pf channel mailbox contains request and response buffers */ struct bnx2x_vf_mbx_msg *vf2pf_mbox; dma_addr_t vf2pf_mbox_mapping; @@ -1278,6 +1279,7 @@ struct bnx2x { dma_addr_t pf2vf_bulletin_mapping; struct pf_vf_bulletin_content old_bulletin; +#endif /* CONFIG_BNX2X_SRIOV */ struct net_device *dev; struct pci_dev *pdev; @@ -1379,8 +1381,14 @@ struct bnx2x { #define IS_VF_FLAG (1 << 22) #define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) + +#ifdef CONFIG_BNX2X_SRIOV #define IS_VF(bp) ((bp)->flags & IS_VF_FLAG) #define IS_PF(bp) (!((bp)->flags & IS_VF_FLAG)) +#else +#define IS_VF(bp) false +#define IS_PF(bp) true +#endif #define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG) #define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG) @@ -2275,18 +2283,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, #define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \ (!((me_reg) & ME_REG_VF_ERR))) -int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id); -int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping); -int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); -int bnx2x_vfpf_release(struct bnx2x *bp); -int bnx2x_vfpf_init(struct bnx2x *bp); -void bnx2x_vfpf_close_vf(struct bnx2x *bp); -int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx); -int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx); -int bnx2x_vfpf_set_mac(struct bnx2x *bp); -int bnx2x_vfpf_set_mcast(struct net_device *dev); -int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp); - int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code); /* Congestion management fairness mode */ #define CMNG_FNS_NONE 0 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index d17fa5a..00706c4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -27,7 +27,6 @@ #include "bnx2x_cmn.h" #include "bnx2x_init.h" #include "bnx2x_sp.h" -#include "bnx2x_sriov.h" /** * bnx2x_move_fp - move content of the fastpath structure. @@ -109,7 +108,7 @@ void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len) (bp->common.bc_ver & 0xff), ((phy_fw_ver[0] != '\0') ? " phy " : ""), phy_fw_ver); } else { - strlcpy(buf, bp->acquire_resp.pfdev_info.fw_ver, buf_len); + bnx2x_vf_fill_fw_str(bp, buf, buf_len); } } @@ -2048,7 +2047,7 @@ static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) * request struct */ if (IS_SRIOV(bp)) - vf_headroom = bp->vfdb->sriov.nr_virtfn * BNX2X_CLIENTS_PER_VF; + vf_headroom = bnx2x_vf_headroom(bp); /* Request is built from stats_query_header and an array of * stats_query_cmd_group each of which contains @@ -3793,93 +3792,6 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) return 0; } -/* New mac for VF. Consider these cases: - * 1. VF hasn't been acquired yet - save the mac in local bulletin board and - * supply at acquire. - * 2. VF has already been acquired but has not yet initialized - store in local - * bulletin board. mac will be posted on VF bulletin board after VF init. VF - * will configure this mac when it is ready. - * 3. VF has already initialized but has not yet setup a queue - post the new - * mac on VF's bulletin board right now. VF will configure this mac when it - * is ready. - * 4. VF has already set a queue - delete any macs already configured for this - * queue and manually config the new mac. - * In any event, once this function has been called refuse any attempts by the - * VF to configure any mac for itself except for this mac. In case of a race - * where the VF fails to see the new post on its bulletin board before sending a - * mac configuration request, the PF will simply fail the request and VF can try - * again after consulting its bulletin board - */ -int bnx2x_set_vf_mac(struct net_device *dev, int queue, u8 *mac) -{ - struct bnx2x *bp = netdev_priv(dev); - int rc, q_logical_state, vfidx = queue; - struct bnx2x_virtf *vf = BP_VF(bp, vfidx); - struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx); - - /* if SRIOV is disabled there is nothing to do (and somewhere, someone - * has erred). - */ - if (!IS_SRIOV(bp)) { - BNX2X_ERR("bnx2x_set_vf_mac called though sriov is disabled\n"); - return -EINVAL; - } - - if (!is_valid_ether_addr(mac)) { - BNX2X_ERR("mac address invalid\n"); - return -EINVAL; - } - - /* update PF's copy of the VF's bulletin. will no longer accept mac - * configuration requests from vf unless match this mac - */ - bulletin->valid_bitmap |= 1 << MAC_ADDR_VALID; - memcpy(bulletin->mac, mac, ETH_ALEN); - - /* Post update on VF's bulletin board */ - rc = bnx2x_post_vf_bulletin(bp, vfidx); - if (rc) { - BNX2X_ERR("failed to update VF[%d] bulletin\n", vfidx); - return rc; - } - - /* is vf initialized and queue set up? */ - q_logical_state = - bnx2x_get_q_logical_state(bp, &bnx2x_vfq(vf, 0, sp_obj)); - if (vf->state == VF_ENABLED && - q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) { - /* configure the mac in device on this vf's queue */ - unsigned long flags = 0; - struct bnx2x_vlan_mac_obj *mac_obj = &bnx2x_vfq(vf, 0, mac_obj); - - /* must lock vfpf channel to protect against vf flows */ - bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); - - /* remove existing eth macs */ - rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true); - if (rc) { - BNX2X_ERR("failed to delete eth macs\n"); - return -EINVAL; - } - - /* remove existing uc list macs */ - rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true); - if (rc) { - BNX2X_ERR("failed to delete uc_list macs\n"); - return -EINVAL; - } - - /* configure the new mac to device */ - __set_bit(RAMROD_COMP_WAIT, &flags); - bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true, - BNX2X_ETH_MAC, &flags); - - bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); - } - - return rc; -} - /* called with rtnl_lock */ int bnx2x_change_mac_addr(struct net_device *dev, void *p) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 23a1fa9..6667ec5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -24,6 +24,7 @@ #include "bnx2x.h" +#include "bnx2x_sriov.h" /* This is used as a replacement for an MCP if it's not present */ extern int load_count[2][3]; /* per-path: 0-common, 1-port0, 2-port1 */ @@ -1128,22 +1129,7 @@ static inline u8 bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp) return fp->cl_id; } -static inline u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) -{ - struct bnx2x *bp = fp->bp; - u32 offset = BAR_USTRORM_INTMEM; - - if (IS_VF(bp)) - return PXP_VF_ADDR_USDM_QUEUES_START + - bp->acquire_resp.resc.hw_qid[fp->index] * - sizeof(struct ustorm_queue_zone_data); - else if (!CHIP_IS_E1x(bp)) - offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); - else - offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); - - return offset; -} +u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp); static inline void bnx2x_init_txdata(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, u32 cid, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 2b6a919..5fcaee1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -60,7 +60,6 @@ #include "bnx2x_init_ops.h" #include "bnx2x_cmn.h" #include "bnx2x_vfpf.h" -#include "bnx2x_sriov.h" #include "bnx2x_dcb.h" #include "bnx2x_sp.h" @@ -5269,62 +5268,6 @@ void bnx2x_drv_pulse(struct bnx2x *bp) bp->fw_drv_pulse_wr_seq); } -/* crc is the first field in the bulletin board. compute the crc over the - * entire bulletin board excluding the crc field itself - */ -u32 bnx2x_crc_vf_bulletin(struct bnx2x *bp, - struct pf_vf_bulletin_content *bulletin) -{ - return crc32(BULLETIN_CRC_SEED, - ((u8 *)bulletin) + sizeof(bulletin->crc), - BULLETIN_CONTENT_SIZE - sizeof(bulletin->crc)); -} - -/* Check for new posts on the bulletin board */ -enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp) -{ - struct pf_vf_bulletin_content bulletin = bp->pf2vf_bulletin->content; - int attempts; - - /* bulletin board hasn't changed since last sample */ - if (bp->old_bulletin.version == bulletin.version) - return PFVF_BULLETIN_UNCHANGED; - - /* validate crc of new bulletin board */ - if (bp->old_bulletin.version != bp->pf2vf_bulletin->content.version) { - /* sampling structure in mid post may result with corrupted data - * validate crc to ensure coherency. - */ - for (attempts = 0; attempts < BULLETIN_ATTEMPTS; attempts++) { - bulletin = bp->pf2vf_bulletin->content; - if (bulletin.crc == bnx2x_crc_vf_bulletin(bp, - &bulletin)) - break; - - BNX2X_ERR("bad crc on bulletin board. contained %x computed %x\n", - bulletin.crc, - bnx2x_crc_vf_bulletin(bp, &bulletin)); - } - if (attempts >= BULLETIN_ATTEMPTS) { - BNX2X_ERR("pf to vf bulletin board crc was wrong %d consecutive times. Aborting\n", - attempts); - return PFVF_BULLETIN_CRC_ERR; - } - } - - /* the mac address in bulletin board is valid and is new */ - if (bulletin.valid_bitmap & 1 << MAC_ADDR_VALID && - memcmp(bulletin.mac, bp->old_bulletin.mac, ETH_ALEN)) { - /* update new mac to net device */ - memcpy(bp->dev->dev_addr, bulletin.mac, ETH_ALEN); - } - - /* copy new bulletin board to bp */ - bp->old_bulletin = bulletin; - - return PFVF_BULLETIN_UPDATED; -} - static void bnx2x_timer(unsigned long data) { struct bnx2x *bp = (struct bnx2x *) data; @@ -9525,29 +9468,14 @@ sp_rtnl_not_reset: /* work which needs rtnl lock not-taken (as it takes the lock itself and * can be called from other contexts as well) */ - rtnl_unlock(); + /* enable SR-IOV if applicable */ if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, - &bp->sp_rtnl_state)) { - int rc = 0; - - /* disbale sriov in case it is still enabled */ - pci_disable_sriov(bp->pdev); - DP(BNX2X_MSG_IOV, "sriov disabled\n"); - - /* enable sriov */ - DP(BNX2X_MSG_IOV, "vf num (%d)\n", (bp->vfdb->sriov.nr_virtfn)); - rc = pci_enable_sriov(bp->pdev, (bp->vfdb->sriov.nr_virtfn)); - if (rc) - BNX2X_ERR("pci_enable_sriov failed with %d\n", rc); - else - DP(BNX2X_MSG_IOV, "sriov enabled\n"); - } + &bp->sp_rtnl_state)) + bnx2x_enable_sriov(bp); } -/* end of nic load/unload */ - static void bnx2x_period_task(struct work_struct *work) { struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work); @@ -11790,7 +11718,9 @@ static const struct net_device_ops bnx2x_netdev_ops = { .ndo_poll_controller = poll_bnx2x, #endif .ndo_setup_tc = bnx2x_setup_tc, +#ifdef CONFIG_BNX2X_SRIOV .ndo_set_vf_mac = bnx2x_set_vf_mac, +#endif #ifdef NETDEV_FCOE_WWNN .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, #endif @@ -12445,17 +12375,10 @@ static int bnx2x_init_one(struct pci_dev *pdev, * l2 connections. */ if (IS_VF(bp)) { - /* vf doorbells are embedded within the regview */ - bp->doorbells = bp->regview + PXP_VF_ADDR_DB_START; - - /* allocate vf2pf mailbox for vf to pf channel */ - BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping, - sizeof(struct bnx2x_vf_mbx_msg)); - - /* allocate pf 2 vf bulletin board */ - BNX2X_PCI_ALLOC(bp->pf2vf_bulletin, &bp->pf2vf_bulletin_mapping, - sizeof(union pf_vf_bulletin)); - + bnx2x_vf_map_doorbells(bp); + rc = bnx2x_vf_pci_alloc(bp); + if (rc) + goto init_one_exit; } else { doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); if (doorbell_size > pci_resource_len(pdev, 2)) { @@ -12552,11 +12475,6 @@ static int bnx2x_init_one(struct pci_dev *pdev, return 0; -alloc_mem_err: - BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, - sizeof(struct bnx2x_vf_mbx_msg)); - rc = -ENOMEM; - init_one_exit: if (bp->regview) iounmap(bp->regview); @@ -13419,619 +13337,36 @@ struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) return cp; } -int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping) -{ - struct cstorm_vf_zone_data __iomem *zone_data = - REG_ADDR(bp, PXP_VF_ADDR_CSDM_GLOBAL_START); - int tout = 600, interval = 100; /* wait for 60 seconds */ - - if (*done) { - BNX2X_ERR("done was non zero before message to pf was sent\n"); - WARN_ON(true); - return -EINVAL; - } - - /* Write message address */ - writel(U64_LO(msg_mapping), - &zone_data->non_trigger.vf_pf_channel.msg_addr_lo); - writel(U64_HI(msg_mapping), - &zone_data->non_trigger.vf_pf_channel.msg_addr_hi); - - /* make sure the address is written before FW accesses it */ - wmb(); - - /* Trigger the PF FW */ - writeb(1, &zone_data->trigger.vf_pf_channel.addr_valid); - - /* Wait for PF to complete */ - while ((tout >= 0) && (!*done)) { - msleep(interval); - tout -= 1; - - /* progress indicator - HV can take its own sweet time in - * answering VFs... - */ - DP_CONT(BNX2X_MSG_IOV, "."); - } - - if (!*done) { - BNX2X_ERR("PF response has timed out\n"); - return -EAGAIN; - } - DP(BNX2X_MSG_SP, "Got a response from PF\n"); - return 0; -} - -int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id) -{ - u32 me_reg; - int tout = 10, interval = 100; /* Wait for 1 sec */ - - do { - /* pxp traps vf read of doorbells and returns me reg value */ - me_reg = readl(bp->doorbells); - if (GOOD_ME_REG(me_reg)) - break; - - msleep(interval); - - BNX2X_ERR("Invalid ME register value: 0x%08x\n. Is pf driver up?", - me_reg); - } while (tout-- > 0); - - if (!GOOD_ME_REG(me_reg)) { - BNX2X_ERR("Invalid ME register value: 0x%08x\n", me_reg); - return -EINVAL; - } - - BNX2X_ERR("valid ME register value: 0x%08x\n", me_reg); - - *vf_id = (me_reg & ME_REG_VF_NUM_MASK) >> ME_REG_VF_NUM_SHIFT; - - return 0; -} - -int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) -{ - int rc = 0, attempts = 0; - struct vfpf_acquire_tlv *req = &bp->vf2pf_mbox->req.acquire; - struct pfvf_acquire_resp_tlv *resp = &bp->vf2pf_mbox->resp.acquire_resp; - u32 vf_id; - bool resources_acquired = false; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_ACQUIRE, sizeof(*req)); - - if (bnx2x_get_vf_id(bp, &vf_id)) - return -EAGAIN; - - req->vfdev_info.vf_id = vf_id; - req->vfdev_info.vf_os = 0; - - req->resc_request.num_rxqs = rx_count; - req->resc_request.num_txqs = tx_count; - req->resc_request.num_sbs = bp->igu_sb_cnt; - req->resc_request.num_mac_filters = VF_ACQUIRE_MAC_FILTERS; - req->resc_request.num_mc_filters = VF_ACQUIRE_MC_FILTERS; - - /* pf 2 vf bulletin board address */ - req->bulletin_addr = bp->pf2vf_bulletin_mapping; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - while (!resources_acquired) { - DP(BNX2X_MSG_SP, "attempting to acquire resources\n"); - - /* send acquire request */ - rc = bnx2x_send_msg2pf(bp, - &resp->hdr.status, - bp->vf2pf_mbox_mapping); - - /* PF timeout */ - if (rc) - return rc; - - /* copy acquire response from buffer to bp */ - memcpy(&bp->acquire_resp, resp, sizeof(bp->acquire_resp)); - - attempts++; - - /* test whether the PF accepted our request. If not, humble the - * the request and try again. - */ - if (bp->acquire_resp.hdr.status == PFVF_STATUS_SUCCESS) { - DP(BNX2X_MSG_SP, "resources acquired\n"); - resources_acquired = true; - } else if (bp->acquire_resp.hdr.status == - PFVF_STATUS_NO_RESOURCE && - attempts < VF_ACQUIRE_THRESH) { - DP(BNX2X_MSG_SP, - "PF unwilling to fulfill resource request. Try PF recommended amount\n"); - - /* humble our request */ - req->resc_request.num_txqs = - bp->acquire_resp.resc.num_txqs; - req->resc_request.num_rxqs = - bp->acquire_resp.resc.num_rxqs; - req->resc_request.num_sbs = - bp->acquire_resp.resc.num_sbs; - req->resc_request.num_mac_filters = - bp->acquire_resp.resc.num_mac_filters; - req->resc_request.num_vlan_filters = - bp->acquire_resp.resc.num_vlan_filters; - req->resc_request.num_mc_filters = - bp->acquire_resp.resc.num_mc_filters; - - /* Clear response buffer */ - memset(&bp->vf2pf_mbox->resp, 0, - sizeof(union pfvf_tlvs)); - } else { - /* PF reports error */ - BNX2X_ERR("Failed to get the requested amount of resources: %d. Breaking...\n", - bp->acquire_resp.hdr.status); - return -EAGAIN; - } - } - - /* get HW info */ - bp->common.chip_id |= (bp->acquire_resp.pfdev_info.chip_num & 0xffff); - bp->link_params.chip_id = bp->common.chip_id; - bp->db_size = bp->acquire_resp.pfdev_info.db_size; - bp->common.int_block = INT_BLOCK_IGU; - bp->common.chip_port_mode = CHIP_2_PORT_MODE; - bp->igu_dsb_id = -1; - bp->mf_ov = 0; - bp->mf_mode = 0; - bp->common.flash_size = 0; - bp->flags |= - NO_WOL_FLAG | NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG | NO_FCOE_FLAG; - bp->igu_sb_cnt = 1; - bp->igu_base_sb = bp->acquire_resp.resc.hw_sbs[0].hw_sb_id; - strlcpy(bp->fw_ver, bp->acquire_resp.pfdev_info.fw_ver, - sizeof(bp->fw_ver)); - - if (is_valid_ether_addr(bp->acquire_resp.resc.current_mac_addr)) - memcpy(bp->dev->dev_addr, - bp->acquire_resp.resc.current_mac_addr, - ETH_ALEN); - - return 0; -} - -int bnx2x_vfpf_release(struct bnx2x *bp) -{ - struct vfpf_release_tlv *req = &bp->vf2pf_mbox->req.release; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - u32 rc = 0, vf_id; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_RELEASE, sizeof(*req)); - - if (bnx2x_get_vf_id(bp, &vf_id)) - return -EAGAIN; - - req->vf_id = vf_id; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - /* send release request */ - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - - if (rc) - /* PF timeout */ - return rc; - if (resp->hdr.status == PFVF_STATUS_SUCCESS) { - /* PF released us */ - DP(BNX2X_MSG_SP, "vf released\n"); - } else { - /* PF reports error */ - BNX2X_ERR("PF failed our release request - are we out of sync? response status: %d\n", - resp->hdr.status); - return -EAGAIN; - } - - return 0; -} - -/* Tell PF about SB addresses */ -int bnx2x_vfpf_init(struct bnx2x *bp) -{ - struct vfpf_init_tlv *req = &bp->vf2pf_mbox->req.init; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - int rc, i; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_INIT, sizeof(*req)); - - /* status blocks */ - for_each_eth_queue(bp, i) - req->sb_addr[i] = (dma_addr_t)bnx2x_fp(bp, i, - status_blk_mapping); - - /* statistics - requests only supports single queue for now */ - req->stats_addr = bp->fw_stats_data_mapping + - offsetof(struct bnx2x_fw_stats_data, queue_stats); - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - if (rc) - return rc; - - if (resp->hdr.status != PFVF_STATUS_SUCCESS) { - BNX2X_ERR("INIT VF failed: %d. Breaking...\n", - resp->hdr.status); - return -EAGAIN; - } - - DP(BNX2X_MSG_SP, "INIT VF Succeeded\n"); - return 0; -} - -/* CLOSE VF - opposite to INIT_VF */ -void bnx2x_vfpf_close_vf(struct bnx2x *bp) -{ - struct vfpf_close_tlv *req = &bp->vf2pf_mbox->req.close; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - int i, rc; - u32 vf_id; - - /* If we haven't got a valid VF id, there is no sense to - * continue with sending messages - */ - if (bnx2x_get_vf_id(bp, &vf_id)) - goto free_irq; - - /* Close the queues */ - for_each_queue(bp, i) - bnx2x_vfpf_teardown_queue(bp, i); - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_CLOSE, sizeof(*req)); - - req->vf_id = vf_id; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - - if (rc) - BNX2X_ERR("Sending CLOSE failed. rc was: %d\n", rc); - - else if (resp->hdr.status != PFVF_STATUS_SUCCESS) - BNX2X_ERR("Sending CLOSE failed: pf response was %d\n", - resp->hdr.status); - -free_irq: - /* Disable HW interrupts, NAPI */ - bnx2x_netif_stop(bp, 0); - /* Delete all NAPI objects */ - bnx2x_del_all_napi(bp); - - /* Release IRQs */ - bnx2x_free_irq(bp); -} - -/* ask the pf to open a queue for the vf */ -int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx) -{ - struct vfpf_setup_q_tlv *req = &bp->vf2pf_mbox->req.setup_q; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; - u16 tpa_agg_size = 0, flags = 0; - int rc; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SETUP_Q, sizeof(*req)); - - /* select tpa mode to request */ - if (!fp->disable_tpa) { - flags |= VFPF_QUEUE_FLG_TPA; - flags |= VFPF_QUEUE_FLG_TPA_IPV6; - if (fp->mode == TPA_MODE_GRO) - flags |= VFPF_QUEUE_FLG_TPA_GRO; - tpa_agg_size = TPA_AGG_SIZE; - } - - /* calculate queue flags */ - flags |= VFPF_QUEUE_FLG_STATS; - flags |= VFPF_QUEUE_FLG_CACHE_ALIGN; - flags |= IS_MF_SD(bp) ? VFPF_QUEUE_FLG_OV : 0; - flags |= VFPF_QUEUE_FLG_VLAN; - DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); - - /* Common */ - req->vf_qid = fp_idx; - req->param_valid = VFPF_RXQ_VALID | VFPF_TXQ_VALID; - - /* Rx */ - req->rxq.rcq_addr = fp->rx_comp_mapping; - req->rxq.rcq_np_addr = fp->rx_comp_mapping + BCM_PAGE_SIZE; - req->rxq.rxq_addr = fp->rx_desc_mapping; - req->rxq.sge_addr = fp->rx_sge_mapping; - req->rxq.vf_sb = fp_idx; - req->rxq.sb_index = HC_INDEX_ETH_RX_CQ_CONS; - req->rxq.hc_rate = bp->rx_ticks ? 1000000/bp->rx_ticks : 0; - req->rxq.mtu = bp->dev->mtu; - req->rxq.buf_sz = fp->rx_buf_size; - req->rxq.sge_buf_sz = BCM_PAGE_SIZE * PAGES_PER_SGE; - req->rxq.tpa_agg_sz = tpa_agg_size; - req->rxq.max_sge_pkt = SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT; - req->rxq.max_sge_pkt = ((req->rxq.max_sge_pkt + PAGES_PER_SGE - 1) & - (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; - req->rxq.flags = flags; - req->rxq.drop_flags = 0; - req->rxq.cache_line_log = BNX2X_RX_ALIGN_SHIFT; - req->rxq.stat_id = -1; /* No stats at the moment */ - - /* Tx */ - req->txq.txq_addr = fp->txdata_ptr[FIRST_TX_COS_INDEX]->tx_desc_mapping; - req->txq.vf_sb = fp_idx; - req->txq.sb_index = HC_INDEX_ETH_TX_CQ_CONS_COS0; - req->txq.hc_rate = bp->tx_ticks ? 1000000/bp->tx_ticks : 0; - req->txq.flags = flags; - req->txq.traffic_type = LLFC_TRAFFIC_TYPE_NW; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - if (rc) - BNX2X_ERR("Sending SETUP_Q message for queue[%d] failed!\n", - fp_idx); - - if (resp->hdr.status != PFVF_STATUS_SUCCESS) { - BNX2X_ERR("Status of SETUP_Q for queue[%d] is %d\n", - fp_idx, resp->hdr.status); - return -EINVAL; - } - return rc; -} - -int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx) +u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) { - struct vfpf_q_op_tlv *req = &bp->vf2pf_mbox->req.q_op; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - int rc; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_TEARDOWN_Q, - sizeof(*req)); - - req->vf_qid = qidx; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - - if (rc) { - BNX2X_ERR("Sending TEARDOWN for queue %d failed: %d\n", qidx, - rc); - return rc; - } - - /* PF failed the transaction */ - if (resp->hdr.status != PFVF_STATUS_SUCCESS) { - BNX2X_ERR("TEARDOWN for queue %d failed: %d\n", qidx, - resp->hdr.status); - return -EINVAL; - } - - return 0; -} - -/* request pf to add a mac for the vf */ -int bnx2x_vfpf_set_mac(struct bnx2x *bp) -{ - struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - int rc; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, - sizeof(*req)); - - req->flags = VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED; - req->vf_qid = 0; - req->n_mac_vlan_filters = 1; - req->filters[0].flags = - VFPF_Q_FILTER_DEST_MAC_VALID | VFPF_Q_FILTER_SET_MAC; - - /* sample bulletin board for new mac */ - bnx2x_sample_bulletin(bp); - - /* copy mac from device to request */ - memcpy(req->filters[0].mac, bp->dev->dev_addr, ETH_ALEN); - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - /* send message to pf */ - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - if (rc) { - BNX2X_ERR("failed to send message to pf. rc was %d\n", rc); - return rc; - } - - /* failure may mean PF was configured with a new mac for us */ - while (resp->hdr.status == PFVF_STATUS_FAILURE) { - DP(BNX2X_MSG_IOV, - "vfpf SET MAC failed. Check bulletin board for new posts\n"); - - /* check if bulletin board was updated */ - if (bnx2x_sample_bulletin(bp) == PFVF_BULLETIN_UPDATED) { - /* copy mac from device to request */ - memcpy(req->filters[0].mac, bp->dev->dev_addr, - ETH_ALEN); - - /* send message to pf */ - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, - bp->vf2pf_mbox_mapping); - } else { - /* no new info in bulletin */ - break; - } - } + struct bnx2x *bp = fp->bp; + u32 offset = BAR_USTRORM_INTMEM; - if (resp->hdr.status != PFVF_STATUS_SUCCESS) { - BNX2X_ERR("vfpf SET MAC failed: %d\n", resp->hdr.status); - return -EINVAL; - } + if (IS_VF(bp)) + return bnx2x_vf_ustorm_prods_offset(bp, fp); + else if (!CHIP_IS_E1x(bp)) + offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); + else + offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); - return 0; + return offset; } -int bnx2x_vfpf_set_mcast(struct net_device *dev) +/* called only on E1H or E2. + * When pretending to be PF, the pretend value is the function number 0...7 + * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID + * combination + */ +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) { - struct bnx2x *bp = netdev_priv(dev); - struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - int rc, i = 0; - struct netdev_hw_addr *ha; + u32 pretend_reg; - if (bp->state != BNX2X_STATE_OPEN) { - DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); - return -EINVAL; - } - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, - sizeof(*req)); - - /* Get Rx mode requested */ - DP(NETIF_MSG_IFUP, "dev->flags = %x\n", dev->flags); - - netdev_for_each_mc_addr(ha, dev) { - DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n", - bnx2x_mc_addr(ha)); - memcpy(req->multicast[i], bnx2x_mc_addr(ha), ETH_ALEN); - i++; - } - - /* We support four PFVF_MAX_MULTICAST_PER_VF mcast - * addresses tops - */ - if (i >= PFVF_MAX_MULTICAST_PER_VF) { - DP(NETIF_MSG_IFUP, - "VF supports not more than %d multicast MAC addresses\n", - PFVF_MAX_MULTICAST_PER_VF); - return -EINVAL; - } - - req->n_multicast = i; - req->flags |= VFPF_SET_Q_FILTERS_MULTICAST_CHANGED; - req->vf_qid = 0; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - if (rc) { - BNX2X_ERR("Sending a message failed: %d\n", rc); - return rc; - } - - if (resp->hdr.status != PFVF_STATUS_SUCCESS) { - BNX2X_ERR("Set Rx mode/multicast failed: %d\n", - resp->hdr.status); - return -EINVAL; - } + if (CHIP_IS_E1H(bp) && pretend_func_val > E1H_FUNC_MAX) + return -1; + /* get my own pretend register */ + pretend_reg = bnx2x_get_pretend_reg(bp); + REG_WR(bp, pretend_reg, pretend_func_val); + REG_RD(bp, pretend_reg); return 0; } - -int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp) -{ - int mode = bp->rx_mode; - struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; - struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; - int rc; - - /* clear mailbox and prep first tlv */ - bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, - sizeof(*req)); - - DP(NETIF_MSG_IFUP, "Rx mode is %d\n", mode); - - switch (mode) { - case BNX2X_RX_MODE_NONE: /* no Rx */ - req->rx_mask = VFPF_RX_MASK_ACCEPT_NONE; - break; - case BNX2X_RX_MODE_NORMAL: - req->rx_mask = VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST; - req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; - req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; - break; - case BNX2X_RX_MODE_ALLMULTI: - req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_MULTICAST; - req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; - req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; - break; - case BNX2X_RX_MODE_PROMISC: - req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_UNICAST; - req->rx_mask |= VFPF_RX_MASK_ACCEPT_ALL_MULTICAST; - req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; - break; - default: - BNX2X_ERR("BAD rx mode (%d)\n", mode); - return -EINVAL; - } - - req->flags |= VFPF_SET_Q_FILTERS_RX_MASK_CHANGED; - req->vf_qid = 0; - - /* add list termination tlv */ - bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, - sizeof(struct channel_list_end_tlv)); - - /* output tlvs list */ - bnx2x_dp_tlv_list(bp, req); - - rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); - if (rc) - BNX2X_ERR("Sending a message failed: %d\n", rc); - - if (resp->hdr.status != PFVF_STATUS_SUCCESS) { - BNX2X_ERR("Set Rx mode failed: %d\n", resp->hdr.status); - return -EINVAL; - } - - return rc; -} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 71fcef0..f2f5c8e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -20,7 +20,7 @@ #include "bnx2x.h" #include "bnx2x_init.h" #include "bnx2x_cmn.h" -#include "bnx2x_sriov.h" +#include /* General service functions */ static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, @@ -1334,25 +1334,6 @@ int bnx2x_vfop_qdown_cmd(struct bnx2x *bp, * for calling pretend prior to calling these routines */ -/* called only on E1H or E2. - * When pretending to be PF, the pretend value is the function number 0...7 - * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID - * combination - */ -int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) -{ - u32 pretend_reg; - - if (CHIP_IS_E1H(bp) && pretend_func_val > E1H_FUNC_MAX) - return -1; - - /* get my own pretend register */ - pretend_reg = bnx2x_get_pretend_reg(bp); - REG_WR(bp, pretend_reg, pretend_func_val); - REG_RD(bp, pretend_reg); - return 0; -} - /* internal vf enable - until vf is enabled internally all transactions * are blocked. this routine should always be called last with pretend. */ @@ -1800,7 +1781,7 @@ static void bnx2x_vf_set_bars(struct bnx2x *bp, struct bnx2x_virtf *vf) u64 start = pci_resource_start(dev, PCI_IOV_RESOURCES + i); u32 size = pci_resource_len(dev, PCI_IOV_RESOURCES + i); - do_div(size, iov->total); + size /= iov->total; vf->bars[n].bar = start + size * vf->abs_vfid; vf->bars[n].size = size; } @@ -3031,3 +3012,188 @@ void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, /* record the locking op */ vf->op_current = CHANNEL_TLV_NONE; } + +void bnx2x_enable_sriov(struct bnx2x *bp) +{ + int rc = 0; + + /* disbale sriov in case it is still enabled */ + pci_disable_sriov(bp->pdev); + DP(BNX2X_MSG_IOV, "sriov disabled\n"); + + /* enable sriov */ + DP(BNX2X_MSG_IOV, "vf num (%d)\n", (bp->vfdb->sriov.nr_virtfn)); + rc = pci_enable_sriov(bp->pdev, (bp->vfdb->sriov.nr_virtfn)); + if (rc) + BNX2X_ERR("pci_enable_sriov failed with %d\n", rc); + else + DP(BNX2X_MSG_IOV, "sriov enabled\n"); +} + +/* New mac for VF. Consider these cases: + * 1. VF hasn't been acquired yet - save the mac in local bulletin board and + * supply at acquire. + * 2. VF has already been acquired but has not yet initialized - store in local + * bulletin board. mac will be posted on VF bulletin board after VF init. VF + * will configure this mac when it is ready. + * 3. VF has already initialized but has not yet setup a queue - post the new + * mac on VF's bulletin board right now. VF will configure this mac when it + * is ready. + * 4. VF has already set a queue - delete any macs already configured for this + * queue and manually config the new mac. + * In any event, once this function has been called refuse any attempts by the + * VF to configure any mac for itself except for this mac. In case of a race + * where the VF fails to see the new post on its bulletin board before sending a + * mac configuration request, the PF will simply fail the request and VF can try + * again after consulting its bulletin board + */ +int bnx2x_set_vf_mac(struct net_device *dev, int queue, u8 *mac) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc, q_logical_state, vfidx = queue; + struct bnx2x_virtf *vf = BP_VF(bp, vfidx); + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx); + + /* if SRIOV is disabled there is nothing to do (and somewhere, someone + * has erred). + */ + if (!IS_SRIOV(bp)) { + BNX2X_ERR("bnx2x_set_vf_mac called though sriov is disabled\n"); + return -EINVAL; + } + + if (!is_valid_ether_addr(mac)) { + BNX2X_ERR("mac address invalid\n"); + return -EINVAL; + } + + /* update PF's copy of the VF's bulletin. will no longer accept mac + * configuration requests from vf unless match this mac + */ + bulletin->valid_bitmap |= 1 << MAC_ADDR_VALID; + memcpy(bulletin->mac, mac, ETH_ALEN); + + /* Post update on VF's bulletin board */ + rc = bnx2x_post_vf_bulletin(bp, vfidx); + if (rc) { + BNX2X_ERR("failed to update VF[%d] bulletin\n", vfidx); + return rc; + } + + /* is vf initialized and queue set up? */ + q_logical_state = + bnx2x_get_q_logical_state(bp, &bnx2x_vfq(vf, 0, sp_obj)); + if (vf->state == VF_ENABLED && + q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) { + /* configure the mac in device on this vf's queue */ + unsigned long flags = 0; + struct bnx2x_vlan_mac_obj *mac_obj = &bnx2x_vfq(vf, 0, mac_obj); + + /* must lock vfpf channel to protect against vf flows */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); + + /* remove existing eth macs */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true); + if (rc) { + BNX2X_ERR("failed to delete eth macs\n"); + return -EINVAL; + } + + /* remove existing uc list macs */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true); + if (rc) { + BNX2X_ERR("failed to delete uc_list macs\n"); + return -EINVAL; + } + + /* configure the new mac to device */ + __set_bit(RAMROD_COMP_WAIT, &flags); + bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true, + BNX2X_ETH_MAC, &flags); + + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); + } + + return rc; +} + +/* crc is the first field in the bulletin board. compute the crc over the + * entire bulletin board excluding the crc field itself + */ +u32 bnx2x_crc_vf_bulletin(struct bnx2x *bp, + struct pf_vf_bulletin_content *bulletin) +{ + return crc32(BULLETIN_CRC_SEED, + ((u8 *)bulletin) + sizeof(bulletin->crc), + BULLETIN_CONTENT_SIZE - sizeof(bulletin->crc)); +} + +/* Check for new posts on the bulletin board */ +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp) +{ + struct pf_vf_bulletin_content bulletin = bp->pf2vf_bulletin->content; + int attempts; + + /* bulletin board hasn't changed since last sample */ + if (bp->old_bulletin.version == bulletin.version) + return PFVF_BULLETIN_UNCHANGED; + + /* validate crc of new bulletin board */ + if (bp->old_bulletin.version != bp->pf2vf_bulletin->content.version) { + /* sampling structure in mid post may result with corrupted data + * validate crc to ensure coherency. + */ + for (attempts = 0; attempts < BULLETIN_ATTEMPTS; attempts++) { + bulletin = bp->pf2vf_bulletin->content; + if (bulletin.crc == bnx2x_crc_vf_bulletin(bp, + &bulletin)) + break; + BNX2X_ERR("bad crc on bulletin board. contained %x computed %x\n", + bulletin.crc, + bnx2x_crc_vf_bulletin(bp, &bulletin)); + } + if (attempts >= BULLETIN_ATTEMPTS) { + BNX2X_ERR("pf to vf bulletin board crc was wrong %d consecutive times. Aborting\n", + attempts); + return PFVF_BULLETIN_CRC_ERR; + } + } + + /* the mac address in bulletin board is valid and is new */ + if (bulletin.valid_bitmap & 1 << MAC_ADDR_VALID && + memcmp(bulletin.mac, bp->old_bulletin.mac, ETH_ALEN)) { + /* update new mac to net device */ + memcpy(bp->dev->dev_addr, bulletin.mac, ETH_ALEN); + } + + /* copy new bulletin board to bp */ + bp->old_bulletin = bulletin; + + return PFVF_BULLETIN_UPDATED; +} + +void bnx2x_vf_map_doorbells(struct bnx2x *bp) +{ + /* vf doorbells are embedded within the regview */ + bp->doorbells = bp->regview + PXP_VF_ADDR_DB_START; +} + +int bnx2x_vf_pci_alloc(struct bnx2x *bp) +{ + /* allocate vf2pf mailbox for vf to pf channel */ + BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + + /* allocate pf 2 vf bulletin board */ + BNX2X_PCI_ALLOC(bp->pf2vf_bulletin, &bp->pf2vf_bulletin_mapping, + sizeof(union pf_vf_bulletin)); + + return 0; + +alloc_mem_err: + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + sizeof(union pf_vf_bulletin)); + return -ENOMEM; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index aab2a05..df4ae74 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -20,7 +20,15 @@ #define BNX2X_SRIOV_H #include "bnx2x_vfpf.h" -#include "bnx2x_cmn.h" +#include "bnx2x.h" + +enum sample_bulletin_result { + PFVF_BULLETIN_UNCHANGED, + PFVF_BULLETIN_UPDATED, + PFVF_BULLETIN_CRC_ERR +}; + +#ifdef CONFIG_BNX2X_SRIOV /* The bnx2x device structure holds vfdb structure described below. * The VF array is indexed by the relative vfid. @@ -712,12 +720,89 @@ u32 bnx2x_crc_vf_bulletin(struct bnx2x *bp, struct pf_vf_bulletin_content *bulletin); int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf); -enum sample_bulletin_result { - PFVF_BULLETIN_UNCHANGED, - PFVF_BULLETIN_UPDATED, - PFVF_BULLETIN_CRC_ERR -}; enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); +/* VF side vfpf channel functions */ +int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); +int bnx2x_vfpf_release(struct bnx2x *bp); +int bnx2x_vfpf_release(struct bnx2x *bp); +int bnx2x_vfpf_init(struct bnx2x *bp); +void bnx2x_vfpf_close_vf(struct bnx2x *bp); +int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx); +int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx); +int bnx2x_vfpf_set_mac(struct bnx2x *bp); +int bnx2x_vfpf_set_mcast(struct net_device *dev); +int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp); + +static inline void bnx2x_vf_fill_fw_str(struct bnx2x *bp, char *buf, + size_t buf_len) +{ + strlcpy(buf, bp->acquire_resp.pfdev_info.fw_ver, buf_len); +} + +static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp, + struct bnx2x_fastpath *fp) +{ + return PXP_VF_ADDR_USDM_QUEUES_START + + bp->acquire_resp.resc.hw_qid[fp->index] * + sizeof(struct ustorm_queue_zone_data); +} + +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); +void bnx2x_vf_map_doorbells(struct bnx2x *bp); +int bnx2x_vf_pci_alloc(struct bnx2x *bp); +void bnx2x_enable_sriov(struct bnx2x *bp); +static inline int bnx2x_vf_headroom(struct bnx2x *bp) +{ + return bp->vfdb->sriov.nr_virtfn * BNX2X_CLIENTS_PER_VF; +} + +#else /* CONFIG_BNX2X_SRIOV */ + +static inline void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, + struct bnx2x_queue_sp_obj **q_obj) {} +static inline void bnx2x_iov_sp_event(struct bnx2x *bp, int vf_cid, + bool queue_work) {} +static inline void bnx2x_vf_handle_flr_event(struct bnx2x *bp) {} +static inline int bnx2x_iov_eq_sp_event(struct bnx2x *bp, + union event_ring_elem *elem) {return 1; } +static inline void bnx2x_iov_sp_task(struct bnx2x *bp) {} +static inline void bnx2x_vf_mbx(struct bnx2x *bp, + struct vf_pf_event_data *vfpf_event) {} +static inline int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) {return line; } +static inline void bnx2x_iov_init_dq(struct bnx2x *bp) {} +static inline int bnx2x_iov_alloc_mem(struct bnx2x *bp) {return 0; } +static inline int bnx2x_iov_chip_cleanup(struct bnx2x *bp) {return 0; } +static inline void bnx2x_iov_init_dmae(struct bnx2x *bp) {} +static inline int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, + int num_vfs_param) {return 0; } +static inline void bnx2x_iov_remove_one(struct bnx2x *bp) {} +static inline void bnx2x_enable_sriov(struct bnx2x *bp) {} +static inline int bnx2x_vfpf_acquire(struct bnx2x *bp, + u8 tx_count, u8 rx_count) {return 0; } +static inline int bnx2x_vfpf_release(struct bnx2x *bp) {return 0; } +static inline int bnx2x_vfpf_init(struct bnx2x *bp) {return 0; } +static inline void bnx2x_vfpf_close_vf(struct bnx2x *bp) {} +static inline int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx) {return 0; } +static inline int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx) {return 0; } +static inline int bnx2x_vfpf_set_mac(struct bnx2x *bp) {return 0; } +static inline int bnx2x_vfpf_set_mcast(struct net_device *dev) {return 0; } +static inline int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp) {return 0; } +static inline int bnx2x_iov_nic_init(struct bnx2x *bp) {return 0; } +static inline int bnx2x_vf_headroom(struct bnx2x *bp) {return 0; } +static inline void bnx2x_iov_adjust_stats_req(struct bnx2x *bp) {} +static inline void bnx2x_vf_fill_fw_str(struct bnx2x *bp, char *buf, + size_t buf_len) {} +static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp, + struct bnx2x_fastpath *fp) {return 0; } +static inline enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp) +{ + return PFVF_BULLETIN_UNCHANGED; +} + +static inline int bnx2x_vf_map_doorbells(struct bnx2x *bp) {return 0; } +static inline int bnx2x_vf_pci_alloc(struct bnx2x *bp) {return 0; } + +#endif /* CONFIG_BNX2X_SRIOV */ #endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index b410b9f..850aad3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -18,7 +18,7 @@ */ #include "bnx2x.h" -#include "bnx2x_sriov.h" +#include "bnx2x_cmn.h" #include /* place a given tlv on the tlv buffer at a given offset */ @@ -98,6 +98,622 @@ static inline int bnx2x_pfvf_status_codes(int rc) } } +int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping) +{ + struct cstorm_vf_zone_data __iomem *zone_data = + REG_ADDR(bp, PXP_VF_ADDR_CSDM_GLOBAL_START); + int tout = 600, interval = 100; /* wait for 60 seconds */ + + if (*done) { + BNX2X_ERR("done was non zero before message to pf was sent\n"); + WARN_ON(true); + return -EINVAL; + } + + /* Write message address */ + writel(U64_LO(msg_mapping), + &zone_data->non_trigger.vf_pf_channel.msg_addr_lo); + writel(U64_HI(msg_mapping), + &zone_data->non_trigger.vf_pf_channel.msg_addr_hi); + + /* make sure the address is written before FW accesses it */ + wmb(); + + /* Trigger the PF FW */ + writeb(1, &zone_data->trigger.vf_pf_channel.addr_valid); + + /* Wait for PF to complete */ + while ((tout >= 0) && (!*done)) { + msleep(interval); + tout -= 1; + + /* progress indicator - HV can take its own sweet time in + * answering VFs... + */ + DP_CONT(BNX2X_MSG_IOV, "."); + } + + if (!*done) { + BNX2X_ERR("PF response has timed out\n"); + return -EAGAIN; + } + DP(BNX2X_MSG_SP, "Got a response from PF\n"); + return 0; +} + +int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id) +{ + u32 me_reg; + int tout = 10, interval = 100; /* Wait for 1 sec */ + + do { + /* pxp traps vf read of doorbells and returns me reg value */ + me_reg = readl(bp->doorbells); + if (GOOD_ME_REG(me_reg)) + break; + + msleep(interval); + + BNX2X_ERR("Invalid ME register value: 0x%08x\n. Is pf driver up?", + me_reg); + } while (tout-- > 0); + + if (!GOOD_ME_REG(me_reg)) { + BNX2X_ERR("Invalid ME register value: 0x%08x\n", me_reg); + return -EINVAL; + } + + BNX2X_ERR("valid ME register value: 0x%08x\n", me_reg); + + *vf_id = (me_reg & ME_REG_VF_NUM_MASK) >> ME_REG_VF_NUM_SHIFT; + + return 0; +} + +int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) +{ + int rc = 0, attempts = 0; + struct vfpf_acquire_tlv *req = &bp->vf2pf_mbox->req.acquire; + struct pfvf_acquire_resp_tlv *resp = &bp->vf2pf_mbox->resp.acquire_resp; + u32 vf_id; + bool resources_acquired = false; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_ACQUIRE, sizeof(*req)); + + if (bnx2x_get_vf_id(bp, &vf_id)) + return -EAGAIN; + + req->vfdev_info.vf_id = vf_id; + req->vfdev_info.vf_os = 0; + + req->resc_request.num_rxqs = rx_count; + req->resc_request.num_txqs = tx_count; + req->resc_request.num_sbs = bp->igu_sb_cnt; + req->resc_request.num_mac_filters = VF_ACQUIRE_MAC_FILTERS; + req->resc_request.num_mc_filters = VF_ACQUIRE_MC_FILTERS; + + /* pf 2 vf bulletin board address */ + req->bulletin_addr = bp->pf2vf_bulletin_mapping; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + while (!resources_acquired) { + DP(BNX2X_MSG_SP, "attempting to acquire resources\n"); + + /* send acquire request */ + rc = bnx2x_send_msg2pf(bp, + &resp->hdr.status, + bp->vf2pf_mbox_mapping); + + /* PF timeout */ + if (rc) + return rc; + + /* copy acquire response from buffer to bp */ + memcpy(&bp->acquire_resp, resp, sizeof(bp->acquire_resp)); + + attempts++; + + /* test whether the PF accepted our request. If not, humble the + * the request and try again. + */ + if (bp->acquire_resp.hdr.status == PFVF_STATUS_SUCCESS) { + DP(BNX2X_MSG_SP, "resources acquired\n"); + resources_acquired = true; + } else if (bp->acquire_resp.hdr.status == + PFVF_STATUS_NO_RESOURCE && + attempts < VF_ACQUIRE_THRESH) { + DP(BNX2X_MSG_SP, + "PF unwilling to fulfill resource request. Try PF recommended amount\n"); + + /* humble our request */ + req->resc_request.num_txqs = + bp->acquire_resp.resc.num_txqs; + req->resc_request.num_rxqs = + bp->acquire_resp.resc.num_rxqs; + req->resc_request.num_sbs = + bp->acquire_resp.resc.num_sbs; + req->resc_request.num_mac_filters = + bp->acquire_resp.resc.num_mac_filters; + req->resc_request.num_vlan_filters = + bp->acquire_resp.resc.num_vlan_filters; + req->resc_request.num_mc_filters = + bp->acquire_resp.resc.num_mc_filters; + + /* Clear response buffer */ + memset(&bp->vf2pf_mbox->resp, 0, + sizeof(union pfvf_tlvs)); + } else { + /* PF reports error */ + BNX2X_ERR("Failed to get the requested amount of resources: %d. Breaking...\n", + bp->acquire_resp.hdr.status); + return -EAGAIN; + } + } + + /* get HW info */ + bp->common.chip_id |= (bp->acquire_resp.pfdev_info.chip_num & 0xffff); + bp->link_params.chip_id = bp->common.chip_id; + bp->db_size = bp->acquire_resp.pfdev_info.db_size; + bp->common.int_block = INT_BLOCK_IGU; + bp->common.chip_port_mode = CHIP_2_PORT_MODE; + bp->igu_dsb_id = -1; + bp->mf_ov = 0; + bp->mf_mode = 0; + bp->common.flash_size = 0; + bp->flags |= + NO_WOL_FLAG | NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG | NO_FCOE_FLAG; + bp->igu_sb_cnt = 1; + bp->igu_base_sb = bp->acquire_resp.resc.hw_sbs[0].hw_sb_id; + strlcpy(bp->fw_ver, bp->acquire_resp.pfdev_info.fw_ver, + sizeof(bp->fw_ver)); + + if (is_valid_ether_addr(bp->acquire_resp.resc.current_mac_addr)) + memcpy(bp->dev->dev_addr, + bp->acquire_resp.resc.current_mac_addr, + ETH_ALEN); + + return 0; +} + +int bnx2x_vfpf_release(struct bnx2x *bp) +{ + struct vfpf_release_tlv *req = &bp->vf2pf_mbox->req.release; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + u32 rc = 0, vf_id; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_RELEASE, sizeof(*req)); + + if (bnx2x_get_vf_id(bp, &vf_id)) + return -EAGAIN; + + req->vf_id = vf_id; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send release request */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) + /* PF timeout */ + return rc; + if (resp->hdr.status == PFVF_STATUS_SUCCESS) { + /* PF released us */ + DP(BNX2X_MSG_SP, "vf released\n"); + } else { + /* PF reports error */ + BNX2X_ERR("PF failed our release request - are we out of sync? response status: %d\n", + resp->hdr.status); + return -EAGAIN; + } + + return 0; +} + +/* Tell PF about SB addresses */ +int bnx2x_vfpf_init(struct bnx2x *bp) +{ + struct vfpf_init_tlv *req = &bp->vf2pf_mbox->req.init; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc, i; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_INIT, sizeof(*req)); + + /* status blocks */ + for_each_eth_queue(bp, i) + req->sb_addr[i] = (dma_addr_t)bnx2x_fp(bp, i, + status_blk_mapping); + + /* statistics - requests only supports single queue for now */ + req->stats_addr = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, queue_stats); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + return rc; + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("INIT VF failed: %d. Breaking...\n", + resp->hdr.status); + return -EAGAIN; + } + + DP(BNX2X_MSG_SP, "INIT VF Succeeded\n"); + return 0; +} + +/* CLOSE VF - opposite to INIT_VF */ +void bnx2x_vfpf_close_vf(struct bnx2x *bp) +{ + struct vfpf_close_tlv *req = &bp->vf2pf_mbox->req.close; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int i, rc; + u32 vf_id; + + /* If we haven't got a valid VF id, there is no sense to + * continue with sending messages + */ + if (bnx2x_get_vf_id(bp, &vf_id)) + goto free_irq; + + /* Close the queues */ + for_each_queue(bp, i) + bnx2x_vfpf_teardown_queue(bp, i); + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_CLOSE, sizeof(*req)); + + req->vf_id = vf_id; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) + BNX2X_ERR("Sending CLOSE failed. rc was: %d\n", rc); + + else if (resp->hdr.status != PFVF_STATUS_SUCCESS) + BNX2X_ERR("Sending CLOSE failed: pf response was %d\n", + resp->hdr.status); + +free_irq: + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + + /* Release IRQs */ + bnx2x_free_irq(bp); +} + +/* ask the pf to open a queue for the vf */ +int bnx2x_vfpf_setup_q(struct bnx2x *bp, int fp_idx) +{ + struct vfpf_setup_q_tlv *req = &bp->vf2pf_mbox->req.setup_q; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; + u16 tpa_agg_size = 0, flags = 0; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SETUP_Q, sizeof(*req)); + + /* select tpa mode to request */ + if (!fp->disable_tpa) { + flags |= VFPF_QUEUE_FLG_TPA; + flags |= VFPF_QUEUE_FLG_TPA_IPV6; + if (fp->mode == TPA_MODE_GRO) + flags |= VFPF_QUEUE_FLG_TPA_GRO; + tpa_agg_size = TPA_AGG_SIZE; + } + + /* calculate queue flags */ + flags |= VFPF_QUEUE_FLG_STATS; + flags |= VFPF_QUEUE_FLG_CACHE_ALIGN; + flags |= IS_MF_SD(bp) ? VFPF_QUEUE_FLG_OV : 0; + flags |= VFPF_QUEUE_FLG_VLAN; + DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); + + /* Common */ + req->vf_qid = fp_idx; + req->param_valid = VFPF_RXQ_VALID | VFPF_TXQ_VALID; + + /* Rx */ + req->rxq.rcq_addr = fp->rx_comp_mapping; + req->rxq.rcq_np_addr = fp->rx_comp_mapping + BCM_PAGE_SIZE; + req->rxq.rxq_addr = fp->rx_desc_mapping; + req->rxq.sge_addr = fp->rx_sge_mapping; + req->rxq.vf_sb = fp_idx; + req->rxq.sb_index = HC_INDEX_ETH_RX_CQ_CONS; + req->rxq.hc_rate = bp->rx_ticks ? 1000000/bp->rx_ticks : 0; + req->rxq.mtu = bp->dev->mtu; + req->rxq.buf_sz = fp->rx_buf_size; + req->rxq.sge_buf_sz = BCM_PAGE_SIZE * PAGES_PER_SGE; + req->rxq.tpa_agg_sz = tpa_agg_size; + req->rxq.max_sge_pkt = SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT; + req->rxq.max_sge_pkt = ((req->rxq.max_sge_pkt + PAGES_PER_SGE - 1) & + (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; + req->rxq.flags = flags; + req->rxq.drop_flags = 0; + req->rxq.cache_line_log = BNX2X_RX_ALIGN_SHIFT; + req->rxq.stat_id = -1; /* No stats at the moment */ + + /* Tx */ + req->txq.txq_addr = fp->txdata_ptr[FIRST_TX_COS_INDEX]->tx_desc_mapping; + req->txq.vf_sb = fp_idx; + req->txq.sb_index = HC_INDEX_ETH_TX_CQ_CONS_COS0; + req->txq.hc_rate = bp->tx_ticks ? 1000000/bp->tx_ticks : 0; + req->txq.flags = flags; + req->txq.traffic_type = LLFC_TRAFFIC_TYPE_NW; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + BNX2X_ERR("Sending SETUP_Q message for queue[%d] failed!\n", + fp_idx); + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Status of SETUP_Q for queue[%d] is %d\n", + fp_idx, resp->hdr.status); + return -EINVAL; + } + return rc; +} + +int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx) +{ + struct vfpf_q_op_tlv *req = &bp->vf2pf_mbox->req.q_op; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_TEARDOWN_Q, + sizeof(*req)); + + req->vf_qid = qidx; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) { + BNX2X_ERR("Sending TEARDOWN for queue %d failed: %d\n", qidx, + rc); + return rc; + } + + /* PF failed the transaction */ + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("TEARDOWN for queue %d failed: %d\n", qidx, + resp->hdr.status); + return -EINVAL; + } + + return 0; +} + +/* request pf to add a mac for the vf */ +int bnx2x_vfpf_set_mac(struct bnx2x *bp) +{ + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + req->flags = VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED; + req->vf_qid = 0; + req->n_mac_vlan_filters = 1; + req->filters[0].flags = + VFPF_Q_FILTER_DEST_MAC_VALID | VFPF_Q_FILTER_SET_MAC; + + /* sample bulletin board for new mac */ + bnx2x_sample_bulletin(bp); + + /* copy mac from device to request */ + memcpy(req->filters[0].mac, bp->dev->dev_addr, ETH_ALEN); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("failed to send message to pf. rc was %d\n", rc); + return rc; + } + + /* failure may mean PF was configured with a new mac for us */ + while (resp->hdr.status == PFVF_STATUS_FAILURE) { + DP(BNX2X_MSG_IOV, + "vfpf SET MAC failed. Check bulletin board for new posts\n"); + + /* check if bulletin board was updated */ + if (bnx2x_sample_bulletin(bp) == PFVF_BULLETIN_UPDATED) { + /* copy mac from device to request */ + memcpy(req->filters[0].mac, bp->dev->dev_addr, + ETH_ALEN); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, + bp->vf2pf_mbox_mapping); + } else { + /* no new info in bulletin */ + break; + } + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("vfpf SET MAC failed: %d\n", resp->hdr.status); + return -EINVAL; + } + + return 0; +} + +int bnx2x_vfpf_set_mcast(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc, i = 0; + struct netdev_hw_addr *ha; + + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); + return -EINVAL; + } + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + /* Get Rx mode requested */ + DP(NETIF_MSG_IFUP, "dev->flags = %x\n", dev->flags); + + netdev_for_each_mc_addr(ha, dev) { + DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n", + bnx2x_mc_addr(ha)); + memcpy(req->multicast[i], bnx2x_mc_addr(ha), ETH_ALEN); + i++; + } + + /* We support four PFVF_MAX_MULTICAST_PER_VF mcast + * addresses tops + */ + if (i >= PFVF_MAX_MULTICAST_PER_VF) { + DP(NETIF_MSG_IFUP, + "VF supports not more than %d multicast MAC addresses\n", + PFVF_MAX_MULTICAST_PER_VF); + return -EINVAL; + } + + req->n_multicast = i; + req->flags |= VFPF_SET_Q_FILTERS_MULTICAST_CHANGED; + req->vf_qid = 0; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("Sending a message failed: %d\n", rc); + return rc; + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Set Rx mode/multicast failed: %d\n", + resp->hdr.status); + return -EINVAL; + } + + return 0; +} + +int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp) +{ + int mode = bp->rx_mode; + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + DP(NETIF_MSG_IFUP, "Rx mode is %d\n", mode); + + switch (mode) { + case BNX2X_RX_MODE_NONE: /* no Rx */ + req->rx_mask = VFPF_RX_MASK_ACCEPT_NONE; + break; + case BNX2X_RX_MODE_NORMAL: + req->rx_mask = VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + break; + case BNX2X_RX_MODE_ALLMULTI: + req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + break; + case BNX2X_RX_MODE_PROMISC: + req->rx_mask = VFPF_RX_MASK_ACCEPT_ALL_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_ALL_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + break; + default: + BNX2X_ERR("BAD rx mode (%d)\n", mode); + return -EINVAL; + } + + req->flags |= VFPF_SET_Q_FILTERS_RX_MASK_CHANGED; + req->vf_qid = 0; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + BNX2X_ERR("Sending a message failed: %d\n", rc); + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Set Rx mode failed: %d\n", resp->hdr.status); + return -EINVAL; + } + + return rc; +} + /* General service functions */ static void storm_memset_vf_mbx_ack(struct bnx2x *bp, u16 abs_fid) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 9f07ada..21d2985 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -18,6 +18,8 @@ #ifndef VF_PF_IF_H #define VF_PF_IF_H +#ifdef CONFIG_BNX2X_SRIOV + /* Common definitions for all HVs */ struct vf_pf_resc_request { u8 num_rxqs; @@ -353,4 +355,5 @@ enum channel_tlvs { CHANNEL_TLV_MAX }; +#endif /* CONFIG_BNX2X_SRIOV */ #endif /* VF_PF_IF_H */ -- cgit v0.10.2 From c03a14e8db06d6687f470f9769f47aa5764b1fe3 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 7 Jan 2013 09:02:08 +0000 Subject: ethtool: consolidate work with ethtool_ops No need to check if ethtool_ops == NULL since it can't be. Use local variable "ops" in functions where it is present instead of dev->ethtool_ops Introduce local variable "ops" in functions where dev->ethtool_ops is used many times. Signed-off-by: Jiri Pirko Reviewed-by: Ben Hutchings Reviewed-by: Flavio Leitner Signed-off-by: David S. Miller diff --git a/net/core/ethtool.c b/net/core/ethtool.c index a870543..d9d5520 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -175,7 +175,7 @@ static int __ethtool_get_sset_count(struct net_device *dev, int sset) if (sset == ETH_SS_FEATURES) return ARRAY_SIZE(netdev_features_strings); - if (ops && ops->get_sset_count && ops->get_strings) + if (ops->get_sset_count && ops->get_strings) return ops->get_sset_count(dev, sset); else return -EOPNOTSUPP; @@ -311,7 +311,7 @@ int __ethtool_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { ASSERT_RTNL(); - if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) + if (!dev->ethtool_ops->get_settings) return -EOPNOTSUPP; memset(cmd, 0, sizeof(struct ethtool_cmd)); @@ -355,7 +355,7 @@ static noinline_for_stack int ethtool_get_drvinfo(struct net_device *dev, memset(&info, 0, sizeof(info)); info.cmd = ETHTOOL_GDRVINFO; - if (ops && ops->get_drvinfo) { + if (ops->get_drvinfo) { ops->get_drvinfo(dev, &info); } else if (dev->dev.parent && dev->dev.parent->driver) { strlcpy(info.bus_info, dev_name(dev->dev.parent), @@ -370,7 +370,7 @@ static noinline_for_stack int ethtool_get_drvinfo(struct net_device *dev, * this method of obtaining string set info is deprecated; * Use ETHTOOL_GSSET_INFO instead. */ - if (ops && ops->get_sset_count) { + if (ops->get_sset_count) { int rc; rc = ops->get_sset_count(dev, ETH_SS_TEST); @@ -383,9 +383,9 @@ static noinline_for_stack int ethtool_get_drvinfo(struct net_device *dev, if (rc >= 0) info.n_priv_flags = rc; } - if (ops && ops->get_regs_len) + if (ops->get_regs_len) info.regdump_len = ops->get_regs_len(dev); - if (ops && ops->get_eeprom_len) + if (ops->get_eeprom_len) info.eedump_len = ops->get_eeprom_len(dev); if (copy_to_user(useraddr, &info, sizeof(info))) @@ -590,13 +590,14 @@ static noinline_for_stack int ethtool_set_rxfh_indir(struct net_device *dev, struct ethtool_rxnfc rx_rings; u32 user_size, dev_size, i; u32 *indir; + const struct ethtool_ops *ops = dev->ethtool_ops; int ret; - if (!dev->ethtool_ops->get_rxfh_indir_size || - !dev->ethtool_ops->set_rxfh_indir || - !dev->ethtool_ops->get_rxnfc) + if (!ops->get_rxfh_indir_size || !ops->set_rxfh_indir || + !ops->get_rxnfc) return -EOPNOTSUPP; - dev_size = dev->ethtool_ops->get_rxfh_indir_size(dev); + + dev_size = ops->get_rxfh_indir_size(dev); if (dev_size == 0) return -EOPNOTSUPP; @@ -613,7 +614,7 @@ static noinline_for_stack int ethtool_set_rxfh_indir(struct net_device *dev, return -ENOMEM; rx_rings.cmd = ETHTOOL_GRXRINGS; - ret = dev->ethtool_ops->get_rxnfc(dev, &rx_rings, NULL); + ret = ops->get_rxnfc(dev, &rx_rings, NULL); if (ret) goto out; @@ -639,7 +640,7 @@ static noinline_for_stack int ethtool_set_rxfh_indir(struct net_device *dev, } } - ret = dev->ethtool_ops->set_rxfh_indir(dev, indir); + ret = ops->set_rxfh_indir(dev, indir); out: kfree(indir); @@ -1082,9 +1083,10 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr) { struct ethtool_value id; static bool busy; + const struct ethtool_ops *ops = dev->ethtool_ops; int rc; - if (!dev->ethtool_ops->set_phys_id) + if (!ops->set_phys_id) return -EOPNOTSUPP; if (busy) @@ -1093,7 +1095,7 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr) if (copy_from_user(&id, useraddr, sizeof(id))) return -EFAULT; - rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE); + rc = ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE); if (rc < 0) return rc; @@ -1118,7 +1120,7 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr) i = n; do { rtnl_lock(); - rc = dev->ethtool_ops->set_phys_id(dev, + rc = ops->set_phys_id(dev, (i & 1) ? ETHTOOL_ID_OFF : ETHTOOL_ID_ON); rtnl_unlock(); if (rc) @@ -1133,7 +1135,7 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr) dev_put(dev); busy = false; - (void)dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE); + (void) ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE); return rc; } @@ -1275,7 +1277,7 @@ static int ethtool_get_dump_flag(struct net_device *dev, struct ethtool_dump dump; const struct ethtool_ops *ops = dev->ethtool_ops; - if (!dev->ethtool_ops->get_dump_flag) + if (!ops->get_dump_flag) return -EOPNOTSUPP; if (copy_from_user(&dump, useraddr, sizeof(dump))) @@ -1299,8 +1301,7 @@ static int ethtool_get_dump_data(struct net_device *dev, const struct ethtool_ops *ops = dev->ethtool_ops; void *data = NULL; - if (!dev->ethtool_ops->get_dump_data || - !dev->ethtool_ops->get_dump_flag) + if (!ops->get_dump_data || !ops->get_dump_flag) return -EOPNOTSUPP; if (copy_from_user(&dump, useraddr, sizeof(dump))) @@ -1346,13 +1347,9 @@ static int ethtool_get_ts_info(struct net_device *dev, void __user *useraddr) info.cmd = ETHTOOL_GET_TS_INFO; if (phydev && phydev->drv && phydev->drv->ts_info) { - err = phydev->drv->ts_info(phydev, &info); - - } else if (dev->ethtool_ops && dev->ethtool_ops->get_ts_info) { - + } else if (ops->get_ts_info) { err = ops->get_ts_info(dev, &info); - } else { info.so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE | -- cgit v0.10.2 From 71331da500cc13dc3c7e5db397d553c80b2e9994 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Fri, 28 Dec 2012 12:04:53 +0200 Subject: xfrm_algo: probe asynchronous block ciphers instead of synchronous IPSEC uses block ciphers asynchronous, but probes only for synchronous block ciphers and makes ealg entries only available if synchronous block cipher is found. So with setup, where hardware crypto driver registers asynchronous block ciphers and software crypto module is not build, ealg is not marked as being available. Use crypto_has_ablkcipher instead and remove ASYNC mask. Signed-off-by: Jussi Kivilinna Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c index 4ce2d93..f9a5495 100644 --- a/net/xfrm/xfrm_algo.c +++ b/net/xfrm/xfrm_algo.c @@ -700,8 +700,7 @@ void xfrm_probe_algs(void) } for (i = 0; i < ealg_entries(); i++) { - status = crypto_has_blkcipher(ealg_list[i].name, 0, - CRYPTO_ALG_ASYNC); + status = crypto_has_ablkcipher(ealg_list[i].name, 0, 0); if (ealg_list[i].available != status) ealg_list[i].available = status; } -- cgit v0.10.2 From 69d3150cfc2075d1693d17dc711de61bf4e4a6c4 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Fri, 28 Dec 2012 12:04:58 +0200 Subject: crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna Acked-by: Herbert Xu Signed-off-by: Steffen Klassert diff --git a/crypto/ctr.c b/crypto/ctr.c index 4ca7222..1f2997c 100644 --- a/crypto/ctr.c +++ b/crypto/ctr.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -25,10 +26,15 @@ struct crypto_ctr_ctx { }; struct crypto_rfc3686_ctx { - struct crypto_blkcipher *child; + struct crypto_ablkcipher *child; u8 nonce[CTR_RFC3686_NONCE_SIZE]; }; +struct crypto_rfc3686_req_ctx { + u8 iv[CTR_RFC3686_BLOCK_SIZE]; + struct ablkcipher_request subreq CRYPTO_MINALIGN_ATTR; +}; + static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, unsigned int keylen) { @@ -243,11 +249,11 @@ static struct crypto_template crypto_ctr_tmpl = { .module = THIS_MODULE, }; -static int crypto_rfc3686_setkey(struct crypto_tfm *parent, const u8 *key, - unsigned int keylen) +static int crypto_rfc3686_setkey(struct crypto_ablkcipher *parent, + const u8 *key, unsigned int keylen) { - struct crypto_rfc3686_ctx *ctx = crypto_tfm_ctx(parent); - struct crypto_blkcipher *child = ctx->child; + struct crypto_rfc3686_ctx *ctx = crypto_ablkcipher_ctx(parent); + struct crypto_ablkcipher *child = ctx->child; int err; /* the nonce is stored in bytes at end of key */ @@ -259,59 +265,64 @@ static int crypto_rfc3686_setkey(struct crypto_tfm *parent, const u8 *key, keylen -= CTR_RFC3686_NONCE_SIZE; - crypto_blkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); - crypto_blkcipher_set_flags(child, crypto_tfm_get_flags(parent) & - CRYPTO_TFM_REQ_MASK); - err = crypto_blkcipher_setkey(child, key, keylen); - crypto_tfm_set_flags(parent, crypto_blkcipher_get_flags(child) & - CRYPTO_TFM_RES_MASK); + crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(parent) & + CRYPTO_TFM_REQ_MASK); + err = crypto_ablkcipher_setkey(child, key, keylen); + crypto_ablkcipher_set_flags(parent, crypto_ablkcipher_get_flags(child) & + CRYPTO_TFM_RES_MASK); return err; } -static int crypto_rfc3686_crypt(struct blkcipher_desc *desc, - struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int crypto_rfc3686_crypt(struct ablkcipher_request *req) { - struct crypto_blkcipher *tfm = desc->tfm; - struct crypto_rfc3686_ctx *ctx = crypto_blkcipher_ctx(tfm); - struct crypto_blkcipher *child = ctx->child; - unsigned long alignmask = crypto_blkcipher_alignmask(tfm); - u8 ivblk[CTR_RFC3686_BLOCK_SIZE + alignmask]; - u8 *iv = PTR_ALIGN(ivblk + 0, alignmask + 1); - u8 *info = desc->info; - int err; + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct crypto_rfc3686_ctx *ctx = crypto_ablkcipher_ctx(tfm); + struct crypto_ablkcipher *child = ctx->child; + unsigned long align = crypto_ablkcipher_alignmask(tfm); + struct crypto_rfc3686_req_ctx *rctx = + (void *)PTR_ALIGN((u8 *)ablkcipher_request_ctx(req), align + 1); + struct ablkcipher_request *subreq = &rctx->subreq; + u8 *iv = rctx->iv; /* set up counter block */ memcpy(iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE); - memcpy(iv + CTR_RFC3686_NONCE_SIZE, info, CTR_RFC3686_IV_SIZE); + memcpy(iv + CTR_RFC3686_NONCE_SIZE, req->info, CTR_RFC3686_IV_SIZE); /* initialize counter portion of counter block */ *(__be32 *)(iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) = cpu_to_be32(1); - desc->tfm = child; - desc->info = iv; - err = crypto_blkcipher_encrypt_iv(desc, dst, src, nbytes); - desc->tfm = tfm; - desc->info = info; + ablkcipher_request_set_tfm(subreq, child); + ablkcipher_request_set_callback(subreq, req->base.flags, + req->base.complete, req->base.data); + ablkcipher_request_set_crypt(subreq, req->src, req->dst, req->nbytes, + iv); - return err; + return crypto_ablkcipher_encrypt(subreq); } static int crypto_rfc3686_init_tfm(struct crypto_tfm *tfm) { struct crypto_instance *inst = (void *)tfm->__crt_alg; - struct crypto_spawn *spawn = crypto_instance_ctx(inst); + struct crypto_skcipher_spawn *spawn = crypto_instance_ctx(inst); struct crypto_rfc3686_ctx *ctx = crypto_tfm_ctx(tfm); - struct crypto_blkcipher *cipher; + struct crypto_ablkcipher *cipher; + unsigned long align; - cipher = crypto_spawn_blkcipher(spawn); + cipher = crypto_spawn_skcipher(spawn); if (IS_ERR(cipher)) return PTR_ERR(cipher); ctx->child = cipher; + align = crypto_tfm_alg_alignmask(tfm); + align &= ~(crypto_tfm_ctx_alignment() - 1); + tfm->crt_ablkcipher.reqsize = align + + sizeof(struct crypto_rfc3686_req_ctx) + + crypto_ablkcipher_reqsize(cipher); + return 0; } @@ -319,74 +330,110 @@ static void crypto_rfc3686_exit_tfm(struct crypto_tfm *tfm) { struct crypto_rfc3686_ctx *ctx = crypto_tfm_ctx(tfm); - crypto_free_blkcipher(ctx->child); + crypto_free_ablkcipher(ctx->child); } static struct crypto_instance *crypto_rfc3686_alloc(struct rtattr **tb) { + struct crypto_attr_type *algt; struct crypto_instance *inst; struct crypto_alg *alg; + struct crypto_skcipher_spawn *spawn; + const char *cipher_name; int err; - err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER); - if (err) + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) return ERR_PTR(err); - alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_BLKCIPHER, - CRYPTO_ALG_TYPE_MASK); - err = PTR_ERR(alg); - if (IS_ERR(alg)) + if ((algt->type ^ CRYPTO_ALG_TYPE_BLKCIPHER) & algt->mask) + return ERR_PTR(-EINVAL); + + cipher_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(cipher_name); + if (IS_ERR(cipher_name)) return ERR_PTR(err); + inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL); + if (!inst) + return ERR_PTR(-ENOMEM); + + spawn = crypto_instance_ctx(inst); + + crypto_set_skcipher_spawn(spawn, inst); + err = crypto_grab_skcipher(spawn, cipher_name, 0, + crypto_requires_sync(algt->type, + algt->mask)); + if (err) + goto err_free_inst; + + alg = crypto_skcipher_spawn_alg(spawn); + /* We only support 16-byte blocks. */ err = -EINVAL; - if (alg->cra_blkcipher.ivsize != CTR_RFC3686_BLOCK_SIZE) - goto out_put_alg; + if (alg->cra_ablkcipher.ivsize != CTR_RFC3686_BLOCK_SIZE) + goto err_drop_spawn; /* Not a stream cipher? */ if (alg->cra_blocksize != 1) - goto out_put_alg; + goto err_drop_spawn; - inst = crypto_alloc_instance("rfc3686", alg); - if (IS_ERR(inst)) - goto out; + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, "rfc3686(%s)", + alg->cra_name) >= CRYPTO_MAX_ALG_NAME) + goto err_drop_spawn; + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "rfc3686(%s)", alg->cra_driver_name) >= + CRYPTO_MAX_ALG_NAME) + goto err_drop_spawn; - inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; inst->alg.cra_priority = alg->cra_priority; inst->alg.cra_blocksize = 1; inst->alg.cra_alignmask = alg->cra_alignmask; - inst->alg.cra_type = &crypto_blkcipher_type; - inst->alg.cra_blkcipher.ivsize = CTR_RFC3686_IV_SIZE; - inst->alg.cra_blkcipher.min_keysize = alg->cra_blkcipher.min_keysize - + CTR_RFC3686_NONCE_SIZE; - inst->alg.cra_blkcipher.max_keysize = alg->cra_blkcipher.max_keysize - + CTR_RFC3686_NONCE_SIZE; + inst->alg.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + (alg->cra_flags & CRYPTO_ALG_ASYNC); + inst->alg.cra_type = &crypto_ablkcipher_type; + + inst->alg.cra_ablkcipher.ivsize = CTR_RFC3686_IV_SIZE; + inst->alg.cra_ablkcipher.min_keysize = + alg->cra_ablkcipher.min_keysize + CTR_RFC3686_NONCE_SIZE; + inst->alg.cra_ablkcipher.max_keysize = + alg->cra_ablkcipher.max_keysize + CTR_RFC3686_NONCE_SIZE; - inst->alg.cra_blkcipher.geniv = "seqiv"; + inst->alg.cra_ablkcipher.geniv = "seqiv"; + + inst->alg.cra_ablkcipher.setkey = crypto_rfc3686_setkey; + inst->alg.cra_ablkcipher.encrypt = crypto_rfc3686_crypt; + inst->alg.cra_ablkcipher.decrypt = crypto_rfc3686_crypt; inst->alg.cra_ctxsize = sizeof(struct crypto_rfc3686_ctx); inst->alg.cra_init = crypto_rfc3686_init_tfm; inst->alg.cra_exit = crypto_rfc3686_exit_tfm; - inst->alg.cra_blkcipher.setkey = crypto_rfc3686_setkey; - inst->alg.cra_blkcipher.encrypt = crypto_rfc3686_crypt; - inst->alg.cra_blkcipher.decrypt = crypto_rfc3686_crypt; - -out: - crypto_mod_put(alg); return inst; -out_put_alg: - inst = ERR_PTR(err); - goto out; +err_drop_spawn: + crypto_drop_skcipher(spawn); +err_free_inst: + kfree(inst); + return ERR_PTR(err); +} + +static void crypto_rfc3686_free(struct crypto_instance *inst) +{ + struct crypto_skcipher_spawn *spawn = crypto_instance_ctx(inst); + + crypto_drop_skcipher(spawn); + kfree(inst); } static struct crypto_template crypto_rfc3686_tmpl = { .name = "rfc3686", .alloc = crypto_rfc3686_alloc, - .free = crypto_ctr_free, + .free = crypto_rfc3686_free, .module = THIS_MODULE, }; diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 7ae2130..87ef7d6 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1591,6 +1591,10 @@ static int do_test(int m) speed_template_16_24_32); test_acipher_speed("ofb(aes)", DECRYPT, sec, NULL, 0, speed_template_16_24_32); + test_acipher_speed("rfc3686(ctr(aes))", ENCRYPT, sec, NULL, 0, + speed_template_20_28_36); + test_acipher_speed("rfc3686(ctr(aes))", DECRYPT, sec, NULL, 0, + speed_template_20_28_36); break; case 501: diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index cd20685..ecdeeb1 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -51,6 +51,7 @@ static u8 speed_template_8_16[] = {8, 16, 0}; static u8 speed_template_8_32[] = {8, 32, 0}; static u8 speed_template_16_32[] = {16, 32, 0}; static u8 speed_template_16_24_32[] = {16, 24, 32, 0}; +static u8 speed_template_20_28_36[] = {20, 28, 36, 0}; static u8 speed_template_32_40_48[] = {32, 40, 48, 0}; static u8 speed_template_32_48[] = {32, 48, 0}; static u8 speed_template_32_48_64[] = {32, 48, 64, 0}; -- cgit v0.10.2 From 0024dc5371b41abb30217bbcaa708d35f49fe273 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Fri, 28 Dec 2012 12:05:04 +0200 Subject: crypto: aesni-intel - remove rfc3686(ctr(aes)), utilize rfc3686 from ctr-module instead rfc3686 in CTR module is now able of using asynchronous ctr(aes) from aesni-intel, so rfc3686(ctr(aes)) in aesni-intel is no longer needed. Signed-off-by: Jussi Kivilinna Acked-by: Herbert Xu Signed-off-by: Steffen Klassert diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 1b9c22b..a0795da 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -40,10 +40,6 @@ #include #include -#if defined(CONFIG_CRYPTO_CTR) || defined(CONFIG_CRYPTO_CTR_MODULE) -#define HAS_CTR -#endif - #if defined(CONFIG_CRYPTO_PCBC) || defined(CONFIG_CRYPTO_PCBC_MODULE) #define HAS_PCBC #endif @@ -395,12 +391,6 @@ static int ablk_ctr_init(struct crypto_tfm *tfm) return ablk_init_common(tfm, "__driver-ctr-aes-aesni"); } -#ifdef HAS_CTR -static int ablk_rfc3686_ctr_init(struct crypto_tfm *tfm) -{ - return ablk_init_common(tfm, "rfc3686(__driver-ctr-aes-aesni)"); -} -#endif #endif #ifdef HAS_PCBC @@ -1158,33 +1148,6 @@ static struct crypto_alg aesni_algs[] = { { .maxauthsize = 16, }, }, -#ifdef HAS_CTR -}, { - .cra_name = "rfc3686(ctr(aes))", - .cra_driver_name = "rfc3686-ctr-aes-aesni", - .cra_priority = 400, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 0, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_rfc3686_ctr_init, - .cra_exit = ablk_exit, - .cra_u = { - .ablkcipher = { - .min_keysize = AES_MIN_KEY_SIZE + - CTR_RFC3686_NONCE_SIZE, - .max_keysize = AES_MAX_KEY_SIZE + - CTR_RFC3686_NONCE_SIZE, - .ivsize = CTR_RFC3686_IV_SIZE, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - .geniv = "seqiv", - }, - }, -#endif #endif #ifdef HAS_PCBC }, { -- cgit v0.10.2 From fda55eca5a33f33ffcd4192c6b2d75179714a52c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 7 Jan 2013 09:28:21 +0000 Subject: net: introduce skb_transport_header_was_set() We have skb_mac_header_was_set() helper to tell if mac_header was set on a skb. We would like the same for transport_header. __netif_receive_skb() doesn't reset the transport header if already set by GRO layer. Note that network stacks usually reset the transport header anyway, after pulling the network header, so this change only allows a followup patch to have more precise qdisc pkt_len computation for GSO packets at ingress side. Signed-off-by: Eric Dumazet Cc: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 320e976..8b2256e 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1492,6 +1492,11 @@ static inline void skb_set_inner_network_header(struct sk_buff *skb, skb->inner_network_header += offset; } +static inline bool skb_transport_header_was_set(const struct sk_buff *skb) +{ + return skb->transport_header != ~0U; +} + static inline unsigned char *skb_transport_header(const struct sk_buff *skb) { return skb->head + skb->transport_header; @@ -1580,6 +1585,11 @@ static inline void skb_set_inner_network_header(struct sk_buff *skb, skb->inner_network_header = skb->data + offset; } +static inline bool skb_transport_header_was_set(const struct sk_buff *skb) +{ + return skb->transport_header != NULL; +} + static inline unsigned char *skb_transport_header(const struct sk_buff *skb) { return skb->transport_header; diff --git a/net/core/dev.c b/net/core/dev.c index a51ccf4..2e24482 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3352,7 +3352,8 @@ static int __netif_receive_skb(struct sk_buff *skb) orig_dev = skb->dev; skb_reset_network_header(skb); - skb_reset_transport_header(skb); + if (!skb_transport_header_was_set(skb)) + skb_reset_transport_header(skb); skb_reset_mac_len(skb); pt_prev = NULL; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index b03fc0c..1e1b9ea 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -260,6 +260,7 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask, skb->end = skb->tail + size; #ifdef NET_SKBUFF_DATA_USES_OFFSET skb->mac_header = ~0U; + skb->transport_header = ~0U; #endif /* make sure we initialize shinfo sequentially */ @@ -328,6 +329,7 @@ struct sk_buff *build_skb(void *data, unsigned int frag_size) skb->end = skb->tail + size; #ifdef NET_SKBUFF_DATA_USES_OFFSET skb->mac_header = ~0U; + skb->transport_header = ~0U; #endif /* make sure we initialize shinfo sequentially */ -- cgit v0.10.2 From 0c7768a0985f281e71c0229c0531ccfc0d3dd1f9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 17:42:56 +0000 Subject: net: fec: Remove 'inline' declarations Fix the following warning when building with W=1 option: drivers/net/ethernet/freescale/fec.c:810:1: warning: '__inline__' is not at beginning of declaration [-Wold-style-declaration] The inline declaration is pointless in this function, so just remove it. While at it, also remove the other 'inline' declarations. Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 6dc2094..5f2b4ac 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -807,7 +807,7 @@ fec_enet_interrupt(int irq, void *dev_id) /* ------------------------------------------------------------------------- */ -static void __inline__ fec_get_mac(struct net_device *ndev) +static void fec_get_mac(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); struct fec_platform_data *pdata = fep->pdev->dev.platform_data; @@ -1592,12 +1592,12 @@ static void fec_reset_phy(struct platform_device *pdev) gpio_set_value(phy_reset, 1); } #else /* CONFIG_OF */ -static inline int fec_get_phy_mode_dt(struct platform_device *pdev) +static int fec_get_phy_mode_dt(struct platform_device *pdev) { return -ENODEV; } -static inline void fec_reset_phy(struct platform_device *pdev) +static void fec_reset_phy(struct platform_device *pdev) { /* * In case of platform probe, the reset has been done -- cgit v0.10.2 From b7394d2429c198b1da3d46ac39192e891029ec0f Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 7 Jan 2013 20:52:39 +0000 Subject: netpoll: prepare for ipv6 This patch adjusts some struct and functions, to prepare for supporting IPv6. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 6989ebe..998fa02 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -269,12 +269,14 @@ static ssize_t show_remote_port(struct netconsole_target *nt, char *buf) static ssize_t show_local_ip(struct netconsole_target *nt, char *buf) { - return snprintf(buf, PAGE_SIZE, "%pI4\n", &nt->np.local_ip); + if (!nt->np.ipv6) + return snprintf(buf, PAGE_SIZE, "%pI4\n", &nt->np.local_ip); } static ssize_t show_remote_ip(struct netconsole_target *nt, char *buf) { - return snprintf(buf, PAGE_SIZE, "%pI4\n", &nt->np.remote_ip); + if (!nt->np.ipv6) + return snprintf(buf, PAGE_SIZE, "%pI4\n", &nt->np.remote_ip); } static ssize_t show_local_mac(struct netconsole_target *nt, char *buf) @@ -410,7 +412,8 @@ static ssize_t store_local_ip(struct netconsole_target *nt, return -EINVAL; } - nt->np.local_ip = in_aton(buf); + if (!strnchr(buf, count, ':')) + nt->np.local_ip.ip = in_aton(buf); return strnlen(buf, count); } @@ -426,7 +429,8 @@ static ssize_t store_remote_ip(struct netconsole_target *nt, return -EINVAL; } - nt->np.remote_ip = in_aton(buf); + if (!strnchr(buf, count, ':')) + nt->np.remote_ip.ip = in_aton(buf); return strnlen(buf, count); } diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 66d5379..f54c3bb 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -12,13 +12,22 @@ #include #include +union inet_addr { + __u32 all[4]; + __be32 ip; + __be32 ip6[4]; + struct in_addr in; + struct in6_addr in6; +}; + struct netpoll { struct net_device *dev; char dev_name[IFNAMSIZ]; const char *name; void (*rx_hook)(struct netpoll *, int, char *, int); - __be32 local_ip, remote_ip; + union inet_addr local_ip, remote_ip; + bool ipv6; u16 local_port, remote_port; u8 remote_mac[ETH_ALEN]; @@ -33,7 +42,7 @@ struct netpoll_info { spinlock_t rx_lock; struct list_head rx_np; /* netpolls that registered an rx_hook */ - struct sk_buff_head arp_tx; /* list of arp requests to reply to */ + struct sk_buff_head neigh_tx; /* list of neigh requests to reply to */ struct sk_buff_head txq; struct delayed_work tx_work; diff --git a/net/core/netpoll.c b/net/core/netpoll.c index d2bda8e..6bd0736 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -55,7 +55,7 @@ static atomic_t trapped; MAX_UDP_CHUNK) static void zap_completion_queue(void); -static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo); +static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo); static unsigned int carrier_timeout = 4; module_param(carrier_timeout, uint, 0644); @@ -181,13 +181,13 @@ static void poll_napi(struct net_device *dev) } } -static void service_arp_queue(struct netpoll_info *npi) +static void service_neigh_queue(struct netpoll_info *npi) { if (npi) { struct sk_buff *skb; - while ((skb = skb_dequeue(&npi->arp_tx))) - netpoll_arp_reply(skb, npi); + while ((skb = skb_dequeue(&npi->neigh_tx))) + netpoll_neigh_reply(skb, npi); } } @@ -216,14 +216,14 @@ static void netpoll_poll_dev(struct net_device *dev) bond_dev = netdev_master_upper_dev_get_rcu(dev); bond_ni = rcu_dereference_bh(bond_dev->npinfo); - while ((skb = skb_dequeue(&ni->arp_tx))) { + while ((skb = skb_dequeue(&ni->neigh_tx))) { skb->dev = bond_dev; - skb_queue_tail(&bond_ni->arp_tx, skb); + skb_queue_tail(&bond_ni->neigh_tx, skb); } } } - service_arp_queue(ni); + service_neigh_queue(ni); zap_completion_queue(); } @@ -386,7 +386,9 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) static atomic_t ip_ident; udp_len = len + sizeof(*udph); - ip_len = udp_len + sizeof(*iph); + if (!np->ipv6) + ip_len = udp_len + sizeof(*iph); + total_len = ip_len + LL_RESERVED_SPACE(np->dev); skb = find_skb(np, total_len + np->dev->needed_tailroom, @@ -403,34 +405,38 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) udph->source = htons(np->local_port); udph->dest = htons(np->remote_port); udph->len = htons(udp_len); - udph->check = 0; - udph->check = csum_tcpudp_magic(np->local_ip, - np->remote_ip, - udp_len, IPPROTO_UDP, - csum_partial(udph, udp_len, 0)); - if (udph->check == 0) - udph->check = CSUM_MANGLED_0; - - skb_push(skb, sizeof(*iph)); - skb_reset_network_header(skb); - iph = ip_hdr(skb); - - /* iph->version = 4; iph->ihl = 5; */ - put_unaligned(0x45, (unsigned char *)iph); - iph->tos = 0; - put_unaligned(htons(ip_len), &(iph->tot_len)); - iph->id = htons(atomic_inc_return(&ip_ident)); - iph->frag_off = 0; - iph->ttl = 64; - iph->protocol = IPPROTO_UDP; - iph->check = 0; - put_unaligned(np->local_ip, &(iph->saddr)); - put_unaligned(np->remote_ip, &(iph->daddr)); - iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); - - eth = (struct ethhdr *) skb_push(skb, ETH_HLEN); - skb_reset_mac_header(skb); - skb->protocol = eth->h_proto = htons(ETH_P_IP); + + if (!np->ipv6) { + udph->check = 0; + udph->check = csum_tcpudp_magic(np->local_ip.ip, + np->remote_ip.ip, + udp_len, IPPROTO_UDP, + csum_partial(udph, udp_len, 0)); + if (udph->check == 0) + udph->check = CSUM_MANGLED_0; + + skb_push(skb, sizeof(*iph)); + skb_reset_network_header(skb); + iph = ip_hdr(skb); + + /* iph->version = 4; iph->ihl = 5; */ + put_unaligned(0x45, (unsigned char *)iph); + iph->tos = 0; + put_unaligned(htons(ip_len), &(iph->tot_len)); + iph->id = htons(atomic_inc_return(&ip_ident)); + iph->frag_off = 0; + iph->ttl = 64; + iph->protocol = IPPROTO_UDP; + iph->check = 0; + put_unaligned(np->local_ip.ip, &(iph->saddr)); + put_unaligned(np->remote_ip.ip, &(iph->daddr)); + iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); + + eth = (struct ethhdr *) skb_push(skb, ETH_HLEN); + skb_reset_mac_header(skb); + skb->protocol = eth->h_proto = htons(ETH_P_IP); + } + memcpy(eth->h_source, np->dev->dev_addr, ETH_ALEN); memcpy(eth->h_dest, np->remote_mac, ETH_ALEN); @@ -440,7 +446,7 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) } EXPORT_SYMBOL(netpoll_send_udp); -static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo) +static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo) { struct arphdr *arp; unsigned char *arp_ptr; @@ -451,7 +457,7 @@ static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo) struct netpoll *np, *tmp; unsigned long flags; int hlen, tlen; - int hits = 0; + int hits = 0, proto; if (list_empty(&npinfo->rx_np)) return; @@ -469,94 +475,97 @@ static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo) if (!hits) return; - /* No arp on this interface */ - if (skb->dev->flags & IFF_NOARP) - return; - - if (!pskb_may_pull(skb, arp_hdr_len(skb->dev))) - return; + proto = ntohs(eth_hdr(skb)->h_proto); + if (proto == ETH_P_IP) { + /* No arp on this interface */ + if (skb->dev->flags & IFF_NOARP) + return; - skb_reset_network_header(skb); - skb_reset_transport_header(skb); - arp = arp_hdr(skb); + if (!pskb_may_pull(skb, arp_hdr_len(skb->dev))) + return; - if ((arp->ar_hrd != htons(ARPHRD_ETHER) && - arp->ar_hrd != htons(ARPHRD_IEEE802)) || - arp->ar_pro != htons(ETH_P_IP) || - arp->ar_op != htons(ARPOP_REQUEST)) - return; + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + arp = arp_hdr(skb); - arp_ptr = (unsigned char *)(arp+1); - /* save the location of the src hw addr */ - sha = arp_ptr; - arp_ptr += skb->dev->addr_len; - memcpy(&sip, arp_ptr, 4); - arp_ptr += 4; - /* If we actually cared about dst hw addr, - it would get copied here */ - arp_ptr += skb->dev->addr_len; - memcpy(&tip, arp_ptr, 4); - - /* Should we ignore arp? */ - if (ipv4_is_loopback(tip) || ipv4_is_multicast(tip)) - return; + if ((arp->ar_hrd != htons(ARPHRD_ETHER) && + arp->ar_hrd != htons(ARPHRD_IEEE802)) || + arp->ar_pro != htons(ETH_P_IP) || + arp->ar_op != htons(ARPOP_REQUEST)) + return; - size = arp_hdr_len(skb->dev); + arp_ptr = (unsigned char *)(arp+1); + /* save the location of the src hw addr */ + sha = arp_ptr; + arp_ptr += skb->dev->addr_len; + memcpy(&sip, arp_ptr, 4); + arp_ptr += 4; + /* If we actually cared about dst hw addr, + it would get copied here */ + arp_ptr += skb->dev->addr_len; + memcpy(&tip, arp_ptr, 4); - spin_lock_irqsave(&npinfo->rx_lock, flags); - list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { - if (tip != np->local_ip) - continue; + /* Should we ignore arp? */ + if (ipv4_is_loopback(tip) || ipv4_is_multicast(tip)) + return; - hlen = LL_RESERVED_SPACE(np->dev); - tlen = np->dev->needed_tailroom; - send_skb = find_skb(np, size + hlen + tlen, hlen); - if (!send_skb) - continue; + size = arp_hdr_len(skb->dev); - skb_reset_network_header(send_skb); - arp = (struct arphdr *) skb_put(send_skb, size); - send_skb->dev = skb->dev; - send_skb->protocol = htons(ETH_P_ARP); + spin_lock_irqsave(&npinfo->rx_lock, flags); + list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { + if (tip != np->local_ip.ip) + continue; + + hlen = LL_RESERVED_SPACE(np->dev); + tlen = np->dev->needed_tailroom; + send_skb = find_skb(np, size + hlen + tlen, hlen); + if (!send_skb) + continue; + + skb_reset_network_header(send_skb); + arp = (struct arphdr *) skb_put(send_skb, size); + send_skb->dev = skb->dev; + send_skb->protocol = htons(ETH_P_ARP); + + /* Fill the device header for the ARP frame */ + if (dev_hard_header(send_skb, skb->dev, ptype, + sha, np->dev->dev_addr, + send_skb->len) < 0) { + kfree_skb(send_skb); + continue; + } - /* Fill the device header for the ARP frame */ - if (dev_hard_header(send_skb, skb->dev, ptype, - sha, np->dev->dev_addr, - send_skb->len) < 0) { - kfree_skb(send_skb); - continue; + /* + * Fill out the arp protocol part. + * + * we only support ethernet device type, + * which (according to RFC 1390) should + * always equal 1 (Ethernet). + */ + + arp->ar_hrd = htons(np->dev->type); + arp->ar_pro = htons(ETH_P_IP); + arp->ar_hln = np->dev->addr_len; + arp->ar_pln = 4; + arp->ar_op = htons(type); + + arp_ptr = (unsigned char *)(arp + 1); + memcpy(arp_ptr, np->dev->dev_addr, np->dev->addr_len); + arp_ptr += np->dev->addr_len; + memcpy(arp_ptr, &tip, 4); + arp_ptr += 4; + memcpy(arp_ptr, sha, np->dev->addr_len); + arp_ptr += np->dev->addr_len; + memcpy(arp_ptr, &sip, 4); + + netpoll_send_skb(np, send_skb); + + /* If there are several rx_hooks for the same address, + we're fine by sending a single reply */ + break; } - - /* - * Fill out the arp protocol part. - * - * we only support ethernet device type, - * which (according to RFC 1390) should - * always equal 1 (Ethernet). - */ - - arp->ar_hrd = htons(np->dev->type); - arp->ar_pro = htons(ETH_P_IP); - arp->ar_hln = np->dev->addr_len; - arp->ar_pln = 4; - arp->ar_op = htons(type); - - arp_ptr = (unsigned char *)(arp + 1); - memcpy(arp_ptr, np->dev->dev_addr, np->dev->addr_len); - arp_ptr += np->dev->addr_len; - memcpy(arp_ptr, &tip, 4); - arp_ptr += 4; - memcpy(arp_ptr, sha, np->dev->addr_len); - arp_ptr += np->dev->addr_len; - memcpy(arp_ptr, &sip, 4); - - netpoll_send_skb(np, send_skb); - - /* If there are several rx_hooks for the same address, - we're fine by sending a single reply */ - break; + spin_unlock_irqrestore(&npinfo->rx_lock, flags); } - spin_unlock_irqrestore(&npinfo->rx_lock, flags); } int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) @@ -576,7 +585,7 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) /* check if netpoll clients need ARP */ if (skb->protocol == htons(ETH_P_ARP) && atomic_read(&trapped)) { - skb_queue_tail(&npinfo->arp_tx, skb); + skb_queue_tail(&npinfo->neigh_tx, skb); return 1; } @@ -587,60 +596,61 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) } proto = ntohs(eth_hdr(skb)->h_proto); - if (proto != ETH_P_IP) + if (proto != ETH_P_IP && proto != ETH_P_IPV6) goto out; if (skb->pkt_type == PACKET_OTHERHOST) goto out; if (skb_shared(skb)) goto out; - if (!pskb_may_pull(skb, sizeof(struct iphdr))) - goto out; - iph = (struct iphdr *)skb->data; - if (iph->ihl < 5 || iph->version != 4) - goto out; - if (!pskb_may_pull(skb, iph->ihl*4)) - goto out; - iph = (struct iphdr *)skb->data; - if (ip_fast_csum((u8 *)iph, iph->ihl) != 0) - goto out; - - len = ntohs(iph->tot_len); - if (skb->len < len || len < iph->ihl*4) - goto out; - - /* - * Our transport medium may have padded the buffer out. - * Now We trim to the true length of the frame. - */ - if (pskb_trim_rcsum(skb, len)) - goto out; + if (proto == ETH_P_IP) { + if (!pskb_may_pull(skb, sizeof(struct iphdr))) + goto out; + iph = (struct iphdr *)skb->data; + if (iph->ihl < 5 || iph->version != 4) + goto out; + if (!pskb_may_pull(skb, iph->ihl*4)) + goto out; + iph = (struct iphdr *)skb->data; + if (ip_fast_csum((u8 *)iph, iph->ihl) != 0) + goto out; - iph = (struct iphdr *)skb->data; - if (iph->protocol != IPPROTO_UDP) - goto out; + len = ntohs(iph->tot_len); + if (skb->len < len || len < iph->ihl*4) + goto out; - len -= iph->ihl*4; - uh = (struct udphdr *)(((char *)iph) + iph->ihl*4); - ulen = ntohs(uh->len); + /* + * Our transport medium may have padded the buffer out. + * Now We trim to the true length of the frame. + */ + if (pskb_trim_rcsum(skb, len)) + goto out; - if (ulen != len) - goto out; - if (checksum_udp(skb, uh, ulen, iph->saddr, iph->daddr)) - goto out; + iph = (struct iphdr *)skb->data; + if (iph->protocol != IPPROTO_UDP) + goto out; - list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { - if (np->local_ip && np->local_ip != iph->daddr) - continue; - if (np->remote_ip && np->remote_ip != iph->saddr) - continue; - if (np->local_port && np->local_port != ntohs(uh->dest)) - continue; + len -= iph->ihl*4; + uh = (struct udphdr *)(((char *)iph) + iph->ihl*4); + ulen = ntohs(uh->len); - np->rx_hook(np, ntohs(uh->source), - (char *)(uh+1), - ulen - sizeof(struct udphdr)); - hits++; + if (ulen != len) + goto out; + if (checksum_udp(skb, uh, ulen, iph->saddr, iph->daddr)) + goto out; + list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { + if (np->local_ip.ip && np->local_ip.ip != iph->daddr) + continue; + if (np->remote_ip.ip && np->remote_ip.ip != iph->saddr) + continue; + if (np->local_port && np->local_port != ntohs(uh->dest)) + continue; + + np->rx_hook(np, ntohs(uh->source), + (char *)(uh+1), + ulen - sizeof(struct udphdr)); + hits++; + } } if (!hits) @@ -661,17 +671,40 @@ out: void netpoll_print_options(struct netpoll *np) { np_info(np, "local port %d\n", np->local_port); - np_info(np, "local IP %pI4\n", &np->local_ip); + if (!np->ipv6) + np_info(np, "local IPv4 address %pI4\n", &np->local_ip.ip); np_info(np, "interface '%s'\n", np->dev_name); np_info(np, "remote port %d\n", np->remote_port); - np_info(np, "remote IP %pI4\n", &np->remote_ip); + if (!np->ipv6) + np_info(np, "remote IPv4 address %pI4\n", &np->remote_ip.ip); np_info(np, "remote ethernet address %pM\n", np->remote_mac); } EXPORT_SYMBOL(netpoll_print_options); +static int netpoll_parse_ip_addr(const char *str, union inet_addr *addr) +{ + const char *end; + + if (!strchr(str, ':') && + in4_pton(str, -1, (void *)addr, -1, &end) > 0) { + if (!*end) + return 0; + } + if (in6_pton(str, -1, addr->in6.s6_addr, -1, &end) > 0) { +#if IS_ENABLED(CONFIG_IPV6) + if (!*end) + return 1; +#else + return -1; +#endif + } + return -1; +} + int netpoll_parse_options(struct netpoll *np, char *opt) { char *cur=opt, *delim; + int ipv6; if (*cur != '@') { if ((delim = strchr(cur, '@')) == NULL) @@ -687,7 +720,11 @@ int netpoll_parse_options(struct netpoll *np, char *opt) if ((delim = strchr(cur, '/')) == NULL) goto parse_failed; *delim = 0; - np->local_ip = in_aton(cur); + ipv6 = netpoll_parse_ip_addr(cur, &np->local_ip); + if (ipv6 < 0) + goto parse_failed; + else + np->ipv6 = (bool)ipv6; cur = delim; } cur++; @@ -719,7 +756,13 @@ int netpoll_parse_options(struct netpoll *np, char *opt) if ((delim = strchr(cur, '/')) == NULL) goto parse_failed; *delim = 0; - np->remote_ip = in_aton(cur); + ipv6 = netpoll_parse_ip_addr(cur, &np->remote_ip); + if (ipv6 < 0) + goto parse_failed; + else if (np->ipv6 != (bool)ipv6) + goto parse_failed; + else + np->ipv6 = (bool)ipv6; cur = delim + 1; if (*cur != 0) { @@ -767,7 +810,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp) INIT_LIST_HEAD(&npinfo->rx_np); spin_lock_init(&npinfo->rx_lock); - skb_queue_head_init(&npinfo->arp_tx); + skb_queue_head_init(&npinfo->neigh_tx); skb_queue_head_init(&npinfo->txq); INIT_DELAYED_WORK(&npinfo->tx_work, queue_process); @@ -859,21 +902,24 @@ int netpoll_setup(struct netpoll *np) } } - if (!np->local_ip) { - rcu_read_lock(); - in_dev = __in_dev_get_rcu(ndev); + if (!np->local_ip.ip) { + if (!np->ipv6) { + rcu_read_lock(); + in_dev = __in_dev_get_rcu(ndev); - if (!in_dev || !in_dev->ifa_list) { + + if (!in_dev || !in_dev->ifa_list) { + rcu_read_unlock(); + np_err(np, "no IP address for %s, aborting\n", + np->dev_name); + err = -EDESTADDRREQ; + goto put; + } + + np->local_ip.ip = in_dev->ifa_list->ifa_local; rcu_read_unlock(); - np_err(np, "no IP address for %s, aborting\n", - np->dev_name); - err = -EDESTADDRREQ; - goto put; + np_info(np, "local IP %pI4\n", &np->local_ip.ip); } - - np->local_ip = in_dev->ifa_list->ifa_local; - rcu_read_unlock(); - np_info(np, "local IP %pI4\n", &np->local_ip); } /* fill up the skb queue */ @@ -906,7 +952,7 @@ static void rcu_cleanup_netpoll_info(struct rcu_head *rcu_head) struct netpoll_info *npinfo = container_of(rcu_head, struct netpoll_info, rcu); - skb_queue_purge(&npinfo->arp_tx); + skb_queue_purge(&npinfo->neigh_tx); skb_queue_purge(&npinfo->txq); /* we can't call cancel_delayed_work_sync here, as we are in softirq */ -- cgit v0.10.2 From acb3e04119fbf9145eb6d6bb707f6fb662ab4d3b Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 7 Jan 2013 20:52:40 +0000 Subject: ipv6: move csum_ipv6_magic() and udp6_csum_init() into static library As suggested by David, udp6_csum_init() is too big to be inlined, move it to ipv6 static library, net/ipv6/ip6_checksum.c. And the generic csum_ipv6_magic() too. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/net/ip6_checksum.h b/include/net/ip6_checksum.h index 652d3d3..7686e3f 100644 --- a/include/net/ip6_checksum.h +++ b/include/net/ip6_checksum.h @@ -35,63 +35,10 @@ #include #ifndef _HAVE_ARCH_IPV6_CSUM - -static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum csum) -{ - - int carry; - __u32 ulen; - __u32 uproto; - __u32 sum = (__force u32)csum; - - sum += (__force u32)saddr->s6_addr32[0]; - carry = (sum < (__force u32)saddr->s6_addr32[0]); - sum += carry; - - sum += (__force u32)saddr->s6_addr32[1]; - carry = (sum < (__force u32)saddr->s6_addr32[1]); - sum += carry; - - sum += (__force u32)saddr->s6_addr32[2]; - carry = (sum < (__force u32)saddr->s6_addr32[2]); - sum += carry; - - sum += (__force u32)saddr->s6_addr32[3]; - carry = (sum < (__force u32)saddr->s6_addr32[3]); - sum += carry; - - sum += (__force u32)daddr->s6_addr32[0]; - carry = (sum < (__force u32)daddr->s6_addr32[0]); - sum += carry; - - sum += (__force u32)daddr->s6_addr32[1]; - carry = (sum < (__force u32)daddr->s6_addr32[1]); - sum += carry; - - sum += (__force u32)daddr->s6_addr32[2]; - carry = (sum < (__force u32)daddr->s6_addr32[2]); - sum += carry; - - sum += (__force u32)daddr->s6_addr32[3]; - carry = (sum < (__force u32)daddr->s6_addr32[3]); - sum += carry; - - ulen = (__force u32)htonl((__u32) len); - sum += ulen; - carry = (sum < ulen); - sum += carry; - - uproto = (__force u32)htonl(proto); - sum += uproto; - carry = (sum < uproto); - sum += carry; - - return csum_fold((__force __wsum)sum); -} - +__sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum csum); #endif static __inline__ __sum16 tcp_v6_check(int len, @@ -126,4 +73,5 @@ static inline void tcp_v6_send_check(struct sock *sk, struct sk_buff *skb) __tcp_v6_send_check(skb, &np->saddr, &np->daddr); } +int udp6_csum_init(struct sk_buff *skb, struct udphdr *uh, int proto); #endif diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile index 4ea2448..309af19 100644 --- a/net/ipv6/Makefile +++ b/net/ipv6/Makefile @@ -40,7 +40,7 @@ obj-$(CONFIG_IPV6_SIT) += sit.o obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o obj-$(CONFIG_IPV6_GRE) += ip6_gre.o -obj-y += addrconf_core.o exthdrs_core.o +obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload) obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o diff --git a/net/ipv6/ip6_checksum.c b/net/ipv6/ip6_checksum.c new file mode 100644 index 0000000..72d198b --- /dev/null +++ b/net/ipv6/ip6_checksum.c @@ -0,0 +1,97 @@ +#include +#include +#include +#include + +#ifndef _HAVE_ARCH_IPV6_CSUM +__sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum csum) +{ + + int carry; + __u32 ulen; + __u32 uproto; + __u32 sum = (__force u32)csum; + + sum += (__force u32)saddr->s6_addr32[0]; + carry = (sum < (__force u32)saddr->s6_addr32[0]); + sum += carry; + + sum += (__force u32)saddr->s6_addr32[1]; + carry = (sum < (__force u32)saddr->s6_addr32[1]); + sum += carry; + + sum += (__force u32)saddr->s6_addr32[2]; + carry = (sum < (__force u32)saddr->s6_addr32[2]); + sum += carry; + + sum += (__force u32)saddr->s6_addr32[3]; + carry = (sum < (__force u32)saddr->s6_addr32[3]); + sum += carry; + + sum += (__force u32)daddr->s6_addr32[0]; + carry = (sum < (__force u32)daddr->s6_addr32[0]); + sum += carry; + + sum += (__force u32)daddr->s6_addr32[1]; + carry = (sum < (__force u32)daddr->s6_addr32[1]); + sum += carry; + + sum += (__force u32)daddr->s6_addr32[2]; + carry = (sum < (__force u32)daddr->s6_addr32[2]); + sum += carry; + + sum += (__force u32)daddr->s6_addr32[3]; + carry = (sum < (__force u32)daddr->s6_addr32[3]); + sum += carry; + + ulen = (__force u32)htonl((__u32) len); + sum += ulen; + carry = (sum < ulen); + sum += carry; + + uproto = (__force u32)htonl(proto); + sum += uproto; + carry = (sum < uproto); + sum += carry; + + return csum_fold((__force __wsum)sum); +} +EXPORT_SYMBOL(csum_ipv6_magic); +#endif + +int udp6_csum_init(struct sk_buff *skb, struct udphdr *uh, int proto) +{ + int err; + + UDP_SKB_CB(skb)->partial_cov = 0; + UDP_SKB_CB(skb)->cscov = skb->len; + + if (proto == IPPROTO_UDPLITE) { + err = udplite_checksum_init(skb, uh); + if (err) + return err; + } + + if (uh->check == 0) { + /* RFC 2460 section 8.1 says that we SHOULD log + this error. Well, it is reasonable. + */ + LIMIT_NETDEBUG(KERN_INFO "IPv6: udp checksum is 0\n"); + return 1; + } + if (skb->ip_summed == CHECKSUM_COMPLETE && + !csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, + skb->len, proto, skb->csum)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + if (!skb_csum_unnecessary(skb)) + skb->csum = ~csum_unfold(csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + skb->len, proto, 0)); + + return 0; +} +EXPORT_SYMBOL(udp6_csum_init); diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index dfaa29b..1afb635 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -752,40 +752,6 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb, return 0; } -static inline int udp6_csum_init(struct sk_buff *skb, struct udphdr *uh, - int proto) -{ - int err; - - UDP_SKB_CB(skb)->partial_cov = 0; - UDP_SKB_CB(skb)->cscov = skb->len; - - if (proto == IPPROTO_UDPLITE) { - err = udplite_checksum_init(skb, uh); - if (err) - return err; - } - - if (uh->check == 0) { - /* RFC 2460 section 8.1 says that we SHOULD log - this error. Well, it is reasonable. - */ - LIMIT_NETDEBUG(KERN_INFO "IPv6: udp checksum is 0\n"); - return 1; - } - if (skb->ip_summed == CHECKSUM_COMPLETE && - !csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, - skb->len, proto, skb->csum)) - skb->ip_summed = CHECKSUM_UNNECESSARY; - - if (!skb_csum_unnecessary(skb)) - skb->csum = ~csum_unfold(csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - skb->len, proto, 0)); - - return 0; -} - int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, int proto) { -- cgit v0.10.2 From b3d936f3ea1c97c32680e0cd235474cf9dadb762 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 7 Jan 2013 20:52:41 +0000 Subject: netpoll: add IPv6 support Currently, netpoll only supports IPv4. This patch adds IPv6 support to netpoll so that we can run netconsole over IPv6 network. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 998fa02..37add21 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -269,13 +269,17 @@ static ssize_t show_remote_port(struct netconsole_target *nt, char *buf) static ssize_t show_local_ip(struct netconsole_target *nt, char *buf) { - if (!nt->np.ipv6) + if (nt->np.ipv6) + return snprintf(buf, PAGE_SIZE, "%pI6c\n", &nt->np.local_ip.in6); + else return snprintf(buf, PAGE_SIZE, "%pI4\n", &nt->np.local_ip); } static ssize_t show_remote_ip(struct netconsole_target *nt, char *buf) { - if (!nt->np.ipv6) + if (nt->np.ipv6) + return snprintf(buf, PAGE_SIZE, "%pI6c\n", &nt->np.remote_ip.in6); + else return snprintf(buf, PAGE_SIZE, "%pI4\n", &nt->np.remote_ip); } @@ -412,8 +416,22 @@ static ssize_t store_local_ip(struct netconsole_target *nt, return -EINVAL; } - if (!strnchr(buf, count, ':')) - nt->np.local_ip.ip = in_aton(buf); + if (strnchr(buf, count, ':')) { + const char *end; + if (in6_pton(buf, count, nt->np.local_ip.in6.s6_addr, -1, &end) > 0) { + if (*end && *end != '\n') { + printk(KERN_ERR "netconsole: invalid IPv6 address at: <%c>\n", *end); + return -EINVAL; + } + nt->np.ipv6 = true; + } else + return -EINVAL; + } else { + if (!nt->np.ipv6) { + nt->np.local_ip.ip = in_aton(buf); + } else + return -EINVAL; + } return strnlen(buf, count); } @@ -429,8 +447,22 @@ static ssize_t store_remote_ip(struct netconsole_target *nt, return -EINVAL; } - if (!strnchr(buf, count, ':')) - nt->np.remote_ip.ip = in_aton(buf); + if (strnchr(buf, count, ':')) { + const char *end; + if (in6_pton(buf, count, nt->np.remote_ip.in6.s6_addr, -1, &end) > 0) { + if (*end && *end != '\n') { + printk(KERN_ERR "netconsole: invalid IPv6 address at: <%c>\n", *end); + return -EINVAL; + } + nt->np.ipv6 = true; + } else + return -EINVAL; + } else { + if (!nt->np.ipv6) { + nt->np.remote_ip.ip = in_aton(buf); + } else + return -EINVAL; + } return strnlen(buf, count); } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 6bd0736..9f05067 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -29,6 +29,9 @@ #include #include #include +#include +#include +#include #include #include @@ -384,9 +387,12 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) struct iphdr *iph; struct ethhdr *eth; static atomic_t ip_ident; + struct ipv6hdr *ip6h; udp_len = len + sizeof(*udph); - if (!np->ipv6) + if (np->ipv6) + ip_len = udp_len + sizeof(*ip6h); + else ip_len = udp_len + sizeof(*iph); total_len = ip_len + LL_RESERVED_SPACE(np->dev); @@ -406,7 +412,35 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) udph->dest = htons(np->remote_port); udph->len = htons(udp_len); - if (!np->ipv6) { + if (np->ipv6) { + udph->check = 0; + udph->check = csum_ipv6_magic(&np->local_ip.in6, + &np->remote_ip.in6, + udp_len, IPPROTO_UDP, + csum_partial(udph, udp_len, 0)); + if (udph->check == 0) + udph->check = CSUM_MANGLED_0; + + skb_push(skb, sizeof(*ip6h)); + skb_reset_network_header(skb); + ip6h = ipv6_hdr(skb); + + /* ip6h->version = 6; ip6h->priority = 0; */ + put_unaligned(0x60, (unsigned char *)ip6h); + ip6h->flow_lbl[0] = 0; + ip6h->flow_lbl[1] = 0; + ip6h->flow_lbl[2] = 0; + + ip6h->payload_len = htons(sizeof(struct udphdr) + len); + ip6h->nexthdr = IPPROTO_UDP; + ip6h->hop_limit = 32; + ip6h->saddr = np->local_ip.in6; + ip6h->daddr = np->remote_ip.in6; + + eth = (struct ethhdr *) skb_push(skb, ETH_HLEN); + skb_reset_mac_header(skb); + skb->protocol = eth->h_proto = htons(ETH_P_IPV6); + } else { udph->check = 0; udph->check = csum_tcpudp_magic(np->local_ip.ip, np->remote_ip.ip, @@ -448,9 +482,7 @@ EXPORT_SYMBOL(netpoll_send_udp); static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo) { - struct arphdr *arp; - unsigned char *arp_ptr; - int size, type = ARPOP_REPLY, ptype = ETH_P_ARP; + int size, type = ARPOP_REPLY; __be32 sip, tip; unsigned char *sha; struct sk_buff *send_skb; @@ -477,6 +509,8 @@ static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo proto = ntohs(eth_hdr(skb)->h_proto); if (proto == ETH_P_IP) { + struct arphdr *arp; + unsigned char *arp_ptr; /* No arp on this interface */ if (skb->dev->flags & IFF_NOARP) return; @@ -528,7 +562,7 @@ static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo send_skb->protocol = htons(ETH_P_ARP); /* Fill the device header for the ARP frame */ - if (dev_hard_header(send_skb, skb->dev, ptype, + if (dev_hard_header(send_skb, skb->dev, ETH_P_ARP, sha, np->dev->dev_addr, send_skb->len) < 0) { kfree_skb(send_skb); @@ -565,9 +599,124 @@ static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo break; } spin_unlock_irqrestore(&npinfo->rx_lock, flags); + } else if( proto == ETH_P_IPV6) { +#if IS_ENABLED(CONFIG_IPV6) + struct nd_msg *msg; + u8 *lladdr = NULL; + struct ipv6hdr *hdr; + struct icmp6hdr *icmp6h; + const struct in6_addr *saddr; + const struct in6_addr *daddr; + struct inet6_dev *in6_dev = NULL; + struct in6_addr *target; + + in6_dev = in6_dev_get(skb->dev); + if (!in6_dev || !in6_dev->cnf.accept_ra) + return; + + if (!pskb_may_pull(skb, skb->len)) + return; + + msg = (struct nd_msg *)skb_transport_header(skb); + + __skb_push(skb, skb->data - skb_transport_header(skb)); + + if (ipv6_hdr(skb)->hop_limit != 255) + return; + if (msg->icmph.icmp6_code != 0) + return; + if (msg->icmph.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION) + return; + + saddr = &ipv6_hdr(skb)->saddr; + daddr = &ipv6_hdr(skb)->daddr; + + size = sizeof(struct icmp6hdr) + sizeof(struct in6_addr); + + spin_lock_irqsave(&npinfo->rx_lock, flags); + list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { + if (memcmp(daddr, &np->local_ip, sizeof(*daddr))) + continue; + + hlen = LL_RESERVED_SPACE(np->dev); + tlen = np->dev->needed_tailroom; + send_skb = find_skb(np, size + hlen + tlen, hlen); + if (!send_skb) + continue; + + send_skb->protocol = htons(ETH_P_IPV6); + send_skb->dev = skb->dev; + + skb_reset_network_header(send_skb); + skb_put(send_skb, sizeof(struct ipv6hdr)); + hdr = ipv6_hdr(send_skb); + + *(__be32*)hdr = htonl(0x60000000); + + hdr->payload_len = htons(size); + hdr->nexthdr = IPPROTO_ICMPV6; + hdr->hop_limit = 255; + hdr->saddr = *saddr; + hdr->daddr = *daddr; + + send_skb->transport_header = send_skb->tail; + skb_put(send_skb, size); + + icmp6h = (struct icmp6hdr *)skb_transport_header(skb); + icmp6h->icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT; + icmp6h->icmp6_router = 0; + icmp6h->icmp6_solicited = 1; + target = (struct in6_addr *)skb_transport_header(send_skb) + sizeof(struct icmp6hdr); + *target = msg->target; + icmp6h->icmp6_cksum = csum_ipv6_magic(saddr, daddr, size, + IPPROTO_ICMPV6, + csum_partial(icmp6h, + size, 0)); + + if (dev_hard_header(send_skb, skb->dev, ETH_P_IPV6, + lladdr, np->dev->dev_addr, + send_skb->len) < 0) { + kfree_skb(send_skb); + continue; + } + + netpoll_send_skb(np, send_skb); + + /* If there are several rx_hooks for the same address, + we're fine by sending a single reply */ + break; + } + spin_unlock_irqrestore(&npinfo->rx_lock, flags); +#endif } } +static bool pkt_is_ns(struct sk_buff *skb) +{ + struct nd_msg *msg; + struct ipv6hdr *hdr; + + if (skb->protocol != htons(ETH_P_ARP)) + return false; + if (!pskb_may_pull(skb, sizeof(struct ipv6hdr) + sizeof(struct nd_msg))) + return false; + + msg = (struct nd_msg *)skb_transport_header(skb); + __skb_push(skb, skb->data - skb_transport_header(skb)); + hdr = ipv6_hdr(skb); + + if (hdr->nexthdr != IPPROTO_ICMPV6) + return false; + if (hdr->hop_limit != 255) + return false; + if (msg->icmph.icmp6_code != 0) + return false; + if (msg->icmph.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION) + return false; + + return true; +} + int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) { int proto, len, ulen; @@ -583,8 +732,10 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) goto out; /* check if netpoll clients need ARP */ - if (skb->protocol == htons(ETH_P_ARP) && - atomic_read(&trapped)) { + if (skb->protocol == htons(ETH_P_ARP) && atomic_read(&trapped)) { + skb_queue_tail(&npinfo->neigh_tx, skb); + return 1; + } else if (pkt_is_ns(skb) && atomic_read(&trapped)) { skb_queue_tail(&npinfo->neigh_tx, skb); return 1; } @@ -651,6 +802,45 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) ulen - sizeof(struct udphdr)); hits++; } + } else { +#if IS_ENABLED(CONFIG_IPV6) + const struct ipv6hdr *ip6h; + + if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) + goto out; + ip6h = (struct ipv6hdr *)skb->data; + if (ip6h->version != 6) + goto out; + len = ntohs(ip6h->payload_len); + if (!len) + goto out; + if (len + sizeof(struct ipv6hdr) > skb->len) + goto out; + if (pskb_trim_rcsum(skb, len + sizeof(struct ipv6hdr))) + goto out; + ip6h = ipv6_hdr(skb); + if (!pskb_may_pull(skb, sizeof(struct udphdr))) + goto out; + uh = udp_hdr(skb); + ulen = ntohs(uh->len); + if (ulen != skb->len) + goto out; + if (udp6_csum_init(skb, uh, IPPROTO_UDP)) + goto out; + list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { + if (memcmp(&np->local_ip.in6, &ip6h->daddr, sizeof(struct in6_addr)) != 0) + continue; + if (memcmp(&np->remote_ip.in6, &ip6h->saddr, sizeof(struct in6_addr)) != 0) + continue; + if (np->local_port && np->local_port != ntohs(uh->dest)) + continue; + + np->rx_hook(np, ntohs(uh->source), + (char *)(uh+1), + ulen - sizeof(struct udphdr)); + hits++; + } +#endif } if (!hits) @@ -671,11 +861,15 @@ out: void netpoll_print_options(struct netpoll *np) { np_info(np, "local port %d\n", np->local_port); - if (!np->ipv6) + if (np->ipv6) + np_info(np, "local IPv6 address %pI6c\n", &np->local_ip.in6); + else np_info(np, "local IPv4 address %pI4\n", &np->local_ip.ip); np_info(np, "interface '%s'\n", np->dev_name); np_info(np, "remote port %d\n", np->remote_port); - if (!np->ipv6) + if (np->ipv6) + np_info(np, "remote IPv6 address %pI6c\n", &np->remote_ip.in6); + else np_info(np, "remote IPv4 address %pI4\n", &np->remote_ip.ip); np_info(np, "remote ethernet address %pM\n", np->remote_mac); } @@ -919,6 +1113,38 @@ int netpoll_setup(struct netpoll *np) np->local_ip.ip = in_dev->ifa_list->ifa_local; rcu_read_unlock(); np_info(np, "local IP %pI4\n", &np->local_ip.ip); + } else { +#if IS_ENABLED(CONFIG_IPV6) + struct inet6_dev *idev; + + err = -EDESTADDRREQ; + rcu_read_lock(); + idev = __in6_dev_get(ndev); + if (idev) { + struct inet6_ifaddr *ifp; + + read_lock_bh(&idev->lock); + list_for_each_entry(ifp, &idev->addr_list, if_list) { + if (ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL) + continue; + np->local_ip.in6 = ifp->addr; + err = 0; + break; + } + read_unlock_bh(&idev->lock); + } + rcu_read_unlock(); + if (err) { + np_err(np, "no IPv6 address for %s, aborting\n", + np->dev_name); + goto put; + } else + np_info(np, "local IPv6 %pI6c\n", &np->local_ip.in6); +#else + np_err(np, "IPv6 is not supported %s, aborting\n", + np->dev_name); + goto put; +#endif } } -- cgit v0.10.2 From 7265a6bbdd28c37e567162308a09807cb22cdb75 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 7 Jan 2013 20:52:42 +0000 Subject: netconsole: add IPv6 example in doc Update the netconsole document as well. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt index 2e9e0ae2..a5d574a 100644 --- a/Documentation/networking/netconsole.txt +++ b/Documentation/networking/netconsole.txt @@ -1,9 +1,10 @@ started by Ingo Molnar , 2001.09.17 2.6 port and netpoll api by Matt Mackall , Sep 9 2003 +IPv6 support by Cong Wang , Jan 1 2013 Please send bug reports to Matt Mackall -and Satyam Sharma +Satyam Sharma , and Cong Wang Introduction: ============= @@ -41,6 +42,10 @@ Examples: insmod netconsole netconsole=@/,@10.0.0.2/ + or using IPv6 + + insmod netconsole netconsole=@/,@fd00:1:2:3::1/ + It also supports logging to multiple remote agents by specifying parameters for the multiple agents separated by semicolons and the complete string enclosed in "quotes", thusly: -- cgit v0.10.2 From 948b337e62ca96b6e7de06fdd5f6fe44769d7e9c Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 8 Jan 2013 01:38:25 +0000 Subject: net: init perm_addr in register_netdevice() Benefit from the fact that dev->addr_assign_type is set to NET_ADDR_PERM in case the device has permanent address. This also fixes the problem that many drivers do not set perm_addr at all. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 2e24482..594830e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6004,6 +6004,13 @@ int register_netdevice(struct net_device *dev) list_netdevice(dev); add_device_randomness(dev->dev_addr, dev->addr_len); + /* If the device has permanent device address, driver should + * set dev_addr and also addr_assign_type should be set to + * NET_ADDR_PERM (default value). + */ + if (dev->addr_assign_type == NET_ADDR_PERM) + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + /* Notify protocols, that a new device appeared. */ ret = call_netdevice_notifiers(NETDEV_REGISTER, dev); ret = notifier_to_errno(ret); -- cgit v0.10.2 From aaeb6cdfa5c07533c2cd6d2c381374c69f7db9dc Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 8 Jan 2013 01:38:26 +0000 Subject: remove init of dev->perm_addr in drivers perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 177cf76..85cf4d1 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -1705,7 +1705,6 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev, netdev->dev_addr[3] = (u8)(u64temp>>16); netdev->dev_addr[4] = (u8)(u64temp>>8); netdev->dev_addr[5] = (u8)u64temp; - memcpy(netdev->perm_addr, netdev->dev_addr, 6); netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_RX; if ((nesvnic->logical_port < 2) || (nesdev->nesadapter->hw_rev != NE020_REV)) diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index ed0feb3..1928e20 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -1293,7 +1293,6 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); for (i = 0; i < 3; i++) ((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); if (print_info) pr_cont(" %pM", dev->dev_addr); /* Unfortunately an all zero eeprom passes the checksum and this diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index c0c1279..587a885 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -374,7 +374,6 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, NS8390_init(dev, 0); memcpy(dev->dev_addr, SA_prom, dev->addr_len); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); i = register_netdev(dev); if (i) diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c index a227ccd..74cfc01 100644 --- a/drivers/net/ethernet/amd/pcnet32.c +++ b/drivers/net/ethernet/amd/pcnet32.c @@ -1688,10 +1688,9 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) memcpy(dev->dev_addr, promaddr, 6); } } - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ - if (!is_valid_ether_addr(dev->perm_addr)) + if (!is_valid_ether_addr(dev->dev_addr)) memset(dev->dev_addr, 0, ETH_ALEN); if (pcnet32_debug & NETIF_MSG_PROBE) { diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 7af95ce..8df02ba 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2542,7 +2542,6 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->addr_assign_type = NET_ADDR_RANDOM; } memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); - memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); if (netif_msg_probe(adapter)) dev_dbg(&pdev->dev, "mac address : %pM\n", adapter->hw.mac_addr); diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index e4466a3..cf79d93 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -2342,7 +2342,6 @@ static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); - memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); netdev_dbg(netdev, "mac address : %pM\n", adapter->hw.mac_addr); INIT_WORK(&adapter->reset_task, atl1e_reset_task); diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index aab83a2..1278b47 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -1433,14 +1433,7 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* copy the MAC address out of the EEPROM */ atl2_read_mac_addr(&adapter->hw); memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); -/* FIXME: do we still need this? */ -#ifdef ETHTOOL_GPERMADDR - memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { -#else if (!is_valid_ether_addr(netdev->dev_addr)) { -#endif err = -EIO; goto err_eeprom; } diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 219f622..3ba6be6 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2111,8 +2111,6 @@ static int b44_get_invariants(struct b44 *bp) return -EINVAL; } - memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len); - bp->imask = IMASK_DEF; /* XXX - really required? diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index a1adfaf..2f0ba8f 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8543,7 +8543,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); memcpy(dev->dev_addr, bp->mac_addr, 6); - memcpy(dev->perm_addr, bp->mac_addr, 6); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO_ECN | diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5fcaee1..c6a2089 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10806,7 +10806,6 @@ static void bnx2x_get_mac_hwinfo(struct bnx2x *bp) } memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); - memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN); if (!bnx2x_is_valid_ether_addr(bp, bp->dev->dev_addr)) dev_err(&bp->pdev->dev, diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bc4d989..b7696eb 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -15772,7 +15772,6 @@ static int tg3_get_macaddr_sparc(struct tg3 *tp) addr = of_get_property(dp, "local-mac-address", &len); if (addr && len == 6) { memcpy(dev->dev_addr, addr, 6); - memcpy(dev->perm_addr, dev->dev_addr, 6); return 0; } return -ENODEV; @@ -15783,7 +15782,6 @@ static int tg3_get_default_macaddr_sparc(struct tg3 *tp) struct net_device *dev = tp->dev; memcpy(dev->dev_addr, idprom->id_ethaddr, 6); - memcpy(dev->perm_addr, idprom->id_ethaddr, 6); return 0; } #endif @@ -15860,7 +15858,6 @@ static int tg3_get_device_address(struct tg3 *tp) #endif return -EINVAL; } - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c index 3dee686..c74a898 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c @@ -3725,8 +3725,6 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, memcpy(adapter->port[i]->dev_addr, hw_addr, ETH_ALEN); - memcpy(adapter->port[i]->perm_addr, hw_addr, - ETH_ALEN); init_link_config(&p->link_config, p->phy.caps); p->phy.ops->power_down(&p->phy, 1); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 22f3af5..4ce6203 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3603,7 +3603,6 @@ int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) p->lport = j; p->rss_size = rss_size; memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN); - memcpy(adap->port[i]->perm_addr, addr, ETH_ALEN); adap->port[i]->dev_id = j; ret = ntohl(c.u.info.lstatus_to_modtype); diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h index 611396c..68eaa9c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h @@ -466,7 +466,6 @@ static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx, u8 hw_addr[]) { memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN); - memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN); } /** diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c index 28fc11b..50d9c63 100644 --- a/drivers/net/ethernet/dlink/sundance.c +++ b/drivers/net/ethernet/dlink/sundance.c @@ -530,7 +530,6 @@ static int sundance_probe1(struct pci_dev *pdev, for (i = 0; i < 3; i++) ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); np = netdev_priv(dev); np->base = ioaddr; diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index a59f077..ec800b0 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2928,8 +2928,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent) e100_phy_init(nic); memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); - memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { if (!eeprom_bad_csum_allow) { netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n"); err = -EAGAIN; diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 294da56..b20fff1 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1123,9 +1123,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* don't block initalization here due to bad MAC address */ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len); - memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) + if (!is_valid_ether_addr(netdev->dev_addr)) e_err(probe, "Invalid MAC Address\n"); diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index fbf75fd..337644d 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6228,11 +6228,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) "NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", - netdev->perm_addr); + netdev->dev_addr); err = -EIO; goto err_eeprom; } diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 31cfe2e..a0a31b5 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2022,9 +2022,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "NVM Read Error\n"); memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); - memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 53281ff..8f66d45 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2757,8 +2757,6 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_hw_init; } - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, (unsigned long) adapter); diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index ae96c10..c756412 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -500,9 +500,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 20a5af6..20d6764 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7444,9 +7444,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); - memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { e_dev_err("invalid MAC address\n"); err = -EIO; goto err_sw_init; diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 257357a..c27d986 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3328,8 +3328,6 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_sw_init; /* The HW MAC address was set and/or determined in sw_init */ - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->dev_addr)) { pr_err("invalid MAC address\n"); err = -EIO; diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 5544a1f..8b08bc4 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3855,7 +3855,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, /* read the mac address */ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); return dev; } diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 3269eb3..366a12a 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4801,7 +4801,6 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port, /* read the mac address */ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); return dev; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 75a3f46..b467513 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1655,10 +1655,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, /* Set defualt MAC */ dev->addr_len = ETH_ALEN; - for (i = 0; i < ETH_ALEN; i++) { + for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[ETH_ALEN - 1 - i] = (u8) (priv->mac >> (8 * i)); - dev->perm_addr[ETH_ALEN - 1 - i] = (u8) (priv->mac >> (8 * i)); - } /* * Set driver features diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c index f4ad60c..7a5e295 100644 --- a/drivers/net/ethernet/natsemi/natsemi.c +++ b/drivers/net/ethernet/natsemi/natsemi.c @@ -862,9 +862,6 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent) prev_eedata = eedata; } - /* Store MAC Address in perm_addr */ - memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); - np = netdev_priv(dev); np->ioaddr = ioaddr; diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 7c94c08..bfd8873 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -8014,7 +8014,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* Set the factory defined MAC address initially */ dev->addr_len = ETH_ALEN; memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); - memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); /* initialize number of multicast & unicast MAC entries variables */ if (sp->device_type == XFRAME_I_DEVICE) { diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 7c87105..794444e 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -4682,7 +4682,6 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) /* Store the fw version for ethttool option */ strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version); memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); - memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN); /* Copy the station mac address to the list */ for (i = 0; i < vdev->no_of_vpath; i++) { diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index b53bf9d..ceb1617 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -5730,9 +5730,8 @@ static int nv_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) "%s: set workaround bit for reversed mac addr\n", __func__); } - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - if (!is_valid_ether_addr(dev->perm_addr)) { + if (!is_valid_ether_addr(dev->dev_addr)) { /* * Bad mac address. At least one bios sets the mac address * to 01:23:45:67:89:ab diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 6098fd4a..8e40ea0 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -501,12 +501,11 @@ netxen_read_mac_addr(struct netxen_adapter *adapter) for (i = 0; i < 6; i++) netdev->dev_addr[i] = *(p + 5 - i); - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len); /* set station address */ - if (!is_valid_ether_addr(netdev->perm_addr)) + if (!is_valid_ether_addr(netdev->dev_addr)) dev_warn(&pdev->dev, "Bad MAC address %pM.\n", netdev->dev_addr); return 0; diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index 67a679a..c0ed12d 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -3867,7 +3867,6 @@ static int ql3xxx_probe(struct pci_dev *pdev, ndev->mtu = qdev->nvram_data.macCfg_port0.etherMtu_mac ; ql_set_mac_addr(ndev, qdev->nvram_data.funcCfg_fn0.macAddress); } - memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); ndev->tx_queue_len = NUM_REQ_Q_ENTRIES; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 3655ca2..d331313 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -208,12 +208,11 @@ qlcnic_read_mac_addr(struct qlcnic_adapter *adapter) return -EIO; memcpy(netdev->dev_addr, mac_addr, ETH_ALEN); - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len); /* set station address */ - if (!is_valid_ether_addr(netdev->perm_addr)) + if (!is_valid_ether_addr(netdev->dev_addr)) dev_warn(&pdev->dev, "Bad MAC address %pM.\n", netdev->dev_addr); diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index f80cd97..7c8ba1a 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4586,7 +4586,6 @@ static int ql_init_device(struct pci_dev *pdev, struct net_device *ndev, goto err_out2; } - memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); /* Keep local copy of current mac address. */ memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len); diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index ba0be4b..be3616d 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -755,9 +755,6 @@ static void r6040_mac_address(struct net_device *dev) iowrite16(adrp[0], ioaddr + MID_0L); iowrite16(adrp[1], ioaddr + MID_0M); iowrite16(adrp[2], ioaddr + MID_0H); - - /* Store MAC Address in perm_addr */ - memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); } static int r6040_open(struct net_device *dev) diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 5ac9332..b62a324 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1949,7 +1949,6 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < 3; i++) ((__le16 *) (dev->dev_addr))[i] = cpu_to_le16(read_eeprom (regs, i + 7, addr_len)); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->netdev_ops = &cp_netdev_ops; netif_napi_add(dev, &cp->napi, cp_rx_poll, 16); diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index 5dc1616..1276ac7 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -991,7 +991,6 @@ static int rtl8139_init_one(struct pci_dev *pdev, for (i = 0; i < 3; i++) ((__le16 *) (dev->dev_addr))[i] = cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len)); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* The Rtl8139-specific entries in the device structure. */ dev->netdev_ops = &rtl8139_netdev_ops; diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index ed96f30..89184f3 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6948,7 +6948,6 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Get MAC address */ for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = RTL_R8(MAC0 + i); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops); dev->watchdog_timeo = RTL8169_TX_TIMEOUT; diff --git a/drivers/net/ethernet/silan/sc92031.c b/drivers/net/ethernet/silan/sc92031.c index b231532..28f7268 100644 --- a/drivers/net/ethernet/silan/sc92031.c +++ b/drivers/net/ethernet/silan/sc92031.c @@ -1458,12 +1458,12 @@ static int sc92031_probe(struct pci_dev *pdev, const struct pci_device_id *id) mac0 = ioread32(port_base + MAC0); mac1 = ioread32(port_base + MAC0 + 4); - dev->dev_addr[0] = dev->perm_addr[0] = mac0 >> 24; - dev->dev_addr[1] = dev->perm_addr[1] = mac0 >> 16; - dev->dev_addr[2] = dev->perm_addr[2] = mac0 >> 8; - dev->dev_addr[3] = dev->perm_addr[3] = mac0; - dev->dev_addr[4] = dev->perm_addr[4] = mac1 >> 8; - dev->dev_addr[5] = dev->perm_addr[5] = mac1; + dev->dev_addr[0] = mac0 >> 24; + dev->dev_addr[1] = mac0 >> 16; + dev->dev_addr[2] = mac0 >> 8; + dev->dev_addr[3] = mac0; + dev->dev_addr[4] = mac1 >> 8; + dev->dev_addr[5] = mac1; err = register_netdev(dev); if (err < 0) diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index 5bffd97..efca14e 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -247,8 +247,7 @@ static const struct ethtool_ops sis900_ethtool_ops; * @net_dev: the net device to get address for * * Older SiS900 and friends, use EEPROM to store MAC address. - * MAC address is read from read_eeprom() into @net_dev->dev_addr and - * @net_dev->perm_addr. + * MAC address is read from read_eeprom() into @net_dev->dev_addr. */ static int sis900_get_mac_addr(struct pci_dev *pci_dev, @@ -271,9 +270,6 @@ static int sis900_get_mac_addr(struct pci_dev *pci_dev, for (i = 0; i < 3; i++) ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - return 1; } @@ -284,8 +280,7 @@ static int sis900_get_mac_addr(struct pci_dev *pci_dev, * * SiS630E model, use APC CMOS RAM to store MAC address. * APC CMOS RAM is accessed through ISA bridge. - * MAC address is read into @net_dev->dev_addr and - * @net_dev->perm_addr. + * MAC address is read into @net_dev->dev_addr. */ static int sis630e_get_mac_addr(struct pci_dev *pci_dev, @@ -311,9 +306,6 @@ static int sis630e_get_mac_addr(struct pci_dev *pci_dev, ((u8 *)(net_dev->dev_addr))[i] = inb(0x71); } - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40); pci_dev_put(isa_bridge); @@ -328,7 +320,7 @@ static int sis630e_get_mac_addr(struct pci_dev *pci_dev, * * SiS635 model, set MAC Reload Bit to load Mac address from APC * to rfdr. rfdr is accessed through rfcr. MAC address is read into - * @net_dev->dev_addr and @net_dev->perm_addr. + * @net_dev->dev_addr. */ static int sis635_get_mac_addr(struct pci_dev *pci_dev, @@ -353,9 +345,6 @@ static int sis635_get_mac_addr(struct pci_dev *pci_dev, *( ((u16 *)net_dev->dev_addr) + i) = sr16(rfdr); } - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - /* enable packet filtering */ sw32(rfcr, rfcrSave | RFEN); @@ -375,7 +364,7 @@ static int sis635_get_mac_addr(struct pci_dev *pci_dev, * EEDONE signal to refuse EEPROM access by LAN. * The EEPROM map of SiS962 or SiS963 is different to SiS900. * The signature field in SiS962 or SiS963 spec is meaningless. - * MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr. + * MAC address is read into @net_dev->dev_addr. */ static int sis96x_get_mac_addr(struct pci_dev *pci_dev, @@ -395,9 +384,6 @@ static int sis96x_get_mac_addr(struct pci_dev *pci_dev, for (i = 0; i < 3; i++) mac[i] = read_eeprom(ioaddr, i + EEPROMMACAddr); - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - rc = 1; break; } diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index a0bdf07..c8c4915 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -8366,14 +8366,12 @@ static void niu_pci_vpd_validate(struct niu *np) return; } - memcpy(dev->perm_addr, vpd->local_mac, ETH_ALEN); + memcpy(dev->dev_addr, vpd->local_mac, ETH_ALEN); - val8 = dev->perm_addr[5]; - dev->perm_addr[5] += np->port; - if (dev->perm_addr[5] < val8) - dev->perm_addr[4]++; - - memcpy(dev->dev_addr, dev->perm_addr, dev->addr_len); + val8 = dev->dev_addr[5]; + dev->dev_addr[5] += np->port; + if (dev->dev_addr[5] < val8) + dev->dev_addr[4]++; } static int niu_pci_probe_sprom(struct niu *np) @@ -8470,29 +8468,27 @@ static int niu_pci_probe_sprom(struct niu *np) val = nr64(ESPC_MAC_ADDR0); netif_printk(np, probe, KERN_DEBUG, np->dev, "SPROM: MAC_ADDR0[%08llx]\n", (unsigned long long)val); - dev->perm_addr[0] = (val >> 0) & 0xff; - dev->perm_addr[1] = (val >> 8) & 0xff; - dev->perm_addr[2] = (val >> 16) & 0xff; - dev->perm_addr[3] = (val >> 24) & 0xff; + dev->dev_addr[0] = (val >> 0) & 0xff; + dev->dev_addr[1] = (val >> 8) & 0xff; + dev->dev_addr[2] = (val >> 16) & 0xff; + dev->dev_addr[3] = (val >> 24) & 0xff; val = nr64(ESPC_MAC_ADDR1); netif_printk(np, probe, KERN_DEBUG, np->dev, "SPROM: MAC_ADDR1[%08llx]\n", (unsigned long long)val); - dev->perm_addr[4] = (val >> 0) & 0xff; - dev->perm_addr[5] = (val >> 8) & 0xff; + dev->dev_addr[4] = (val >> 0) & 0xff; + dev->dev_addr[5] = (val >> 8) & 0xff; - if (!is_valid_ether_addr(&dev->perm_addr[0])) { + if (!is_valid_ether_addr(&dev->dev_addr[0])) { dev_err(np->device, "SPROM MAC address invalid [ %pM ]\n", - dev->perm_addr); + dev->dev_addr); return -EINVAL; } - val8 = dev->perm_addr[5]; - dev->perm_addr[5] += np->port; - if (dev->perm_addr[5] < val8) - dev->perm_addr[4]++; - - memcpy(dev->dev_addr, dev->perm_addr, dev->addr_len); + val8 = dev->dev_addr[5]; + dev->dev_addr[5] += np->port; + if (dev->dev_addr[5] < val8) + dev->dev_addr[4]++; val = nr64(ESPC_MOD_STR_LEN); netif_printk(np, probe, KERN_DEBUG, np->dev, @@ -9267,16 +9263,14 @@ static int niu_get_of_props(struct niu *np) netdev_err(dev, "%s: OF MAC address prop len (%d) is wrong\n", dp->full_name, prop_len); } - memcpy(dev->perm_addr, mac_addr, dev->addr_len); - if (!is_valid_ether_addr(&dev->perm_addr[0])) { + memcpy(dev->dev_addr, mac_addr, dev->addr_len); + if (!is_valid_ether_addr(&dev->dev_addr[0])) { netdev_err(dev, "%s: OF MAC address is invalid\n", dp->full_name); - netdev_err(dev, "%s: [ %pM ]\n", dp->full_name, dev->perm_addr); + netdev_err(dev, "%s: [ %pM ]\n", dp->full_name, dev->dev_addr); return -EINVAL; } - memcpy(dev->dev_addr, dev->perm_addr, dev->addr_len); - model = of_get_property(dp, "model", &prop_len); if (model) diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 1cf767e..289b4ee 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1032,8 +1032,6 @@ static struct vnet *vnet_new(const u64 *local_mac) for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = (*local_mac >> (5 - i) * 8) & 0xff; - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - vp = netdev_priv(dev); spin_lock_init(&vp->lock); diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c index 23a789e..f16410e 100644 --- a/drivers/net/ethernet/toshiba/tc35815.c +++ b/drivers/net/ethernet/toshiba/tc35815.c @@ -856,7 +856,6 @@ static int tc35815_init_one(struct pci_dev *pdev, if (rc) goto err_out; - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); printk(KERN_INFO "%s: %s at 0x%lx, %pM, IRQ %d\n", dev->name, chip_info[ent->driver_data].name, diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index 7992b3e..eab63e1 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -990,7 +990,6 @@ static int rhine_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) netdev_info(dev, "Using random MAC address: %pM\n", dev->dev_addr); } - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* For Rhine-I/II, phy_id is loaded from EEPROM */ if (!phy_id) diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c index 1e9cb0b..8f1c256 100644 --- a/drivers/net/ieee802154/fakehard.c +++ b/drivers/net/ieee802154/fakehard.c @@ -372,7 +372,6 @@ static int ieee802154fake_probe(struct platform_device *pdev) memcpy(dev->dev_addr, "\xba\xbe\xca\xfe\xde\xad\xbe\xef", dev->addr_len); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* * For now we'd like to emulate 2.4 GHz-only device, diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index 92c49e0..0192073 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -159,7 +159,6 @@ kalmia_bind(struct usbnet *dev, struct usb_interface *intf) } memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN); - memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN); return status; } diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 4a433583..cc49aac 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -431,7 +431,6 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) goto halt_fail_and_release; } memcpy(net->dev_addr, bp, ETH_ALEN); - memcpy(net->perm_addr, bp, ETH_ALEN); /* set a nonzero filter to enable data transfers */ memset(u.set, 0, sizeof *u.set); diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index def12b3..c9c711d 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -1055,7 +1055,6 @@ int i2400m_read_mac_addr(struct i2400m *i2400m) result = 0; } net_dev->addr_len = ETH_ALEN; - memcpy(net_dev->perm_addr, ack_buf.ack_pl, ETH_ALEN); memcpy(net_dev->dev_addr, ack_buf.ack_pl, ETH_ALEN); error_read_mac: d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, result); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 844f201..3e824b8 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11327,7 +11327,6 @@ static int ipw_up(struct ipw_priv *priv) if (!(priv->config & CFG_CUSTOM_MAC)) eeprom_parse_mac(priv, priv->mac_addr); memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN); - memcpy(priv->net_dev->perm_addr, priv->mac_addr, ETH_ALEN); ipw_set_geo(priv); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a875499..3b3d471 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -2117,7 +2117,6 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy, dev->ieee80211_ptr = priv->wdev; dev->ieee80211_ptr->iftype = priv->bss_mode; memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); - memcpy(dev->perm_addr, wiphy->perm_addr, ETH_ALEN); SET_NETDEV_DEV(dev, wiphy_dev(wiphy)); dev->flags |= IFF_BROADCAST | IFF_MULTICAST; diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index 88e3ad2..1e802f8 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -2290,7 +2290,6 @@ int orinoco_if_add(struct orinoco_private *priv, netif_carrier_off(dev); memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); - memcpy(dev->perm_addr, wiphy->perm_addr, ETH_ALEN); dev->base_addr = base_addr; dev->irq = irq; -- cgit v0.10.2 From 4a484cffc5e1836114e9556f7c704412d491200c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jan 2013 10:22:07 +0100 Subject: regulatory: fix uevent The uevent callback doesn't protect its access to last_request, which now causes a warning since the conversion to get_last_request(). Fix this by allowing to use RCU protection for last_request. Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 0b35de0..2193f62 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -140,8 +140,8 @@ static void rcu_free_regdom(const struct ieee80211_regdomain *r) static struct regulatory_request *get_last_request(void) { - return rcu_dereference_protected(last_request, - lockdep_is_held(®_mutex)); + return rcu_dereference_check(last_request, + lockdep_is_held(®_mutex)); } /* Used to queue up regulatory hints */ @@ -2250,14 +2250,21 @@ int set_regdom(const struct ieee80211_regdomain *rd) #ifdef CONFIG_HOTPLUG int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env) { - struct regulatory_request *lr = get_last_request(); + struct regulatory_request *lr; + u8 alpha2[2]; + bool add = false; + rcu_read_lock(); + lr = get_last_request(); if (lr && !lr->processed) { - if (add_uevent_var(env, "COUNTRY=%c%c", - lr->alpha2[0], lr->alpha2[1])) - return -ENOMEM; + memcpy(alpha2, lr->alpha2, 2); + add = true; } + rcu_read_unlock(); + if (add) + return add_uevent_var(env, "COUNTRY=%c%c", + alpha2[0], alpha2[1]); return 0; } #else -- cgit v0.10.2 From 2d31986764926630a6df72123a5e217219b32594 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jan 2013 12:01:38 +0100 Subject: regulatory: fix restore_regulatory_settings My commit 379b82f4c9dc6e67bf61aa61b096c06a2f320f60 ("regulatory: pass new regdomain to reset function") broke the restore_regulatory_settings() function due to a logic change. Consider this change: - reset_regdomains(true); - cfg80211_regdomain = cfg80211_world_regdom; + reset_regdomains(true, cfg80211_world_regdom); This looks innocent enough, until you realise that the called function (reset_regdomains) also resets the cfg80211_world_regdom pointer, so that the old version of the code would use the new object it pointed to and the new version of the code uses the old object. This lead to a double-free of this object. Since reset_regdomains() sets it to &world_regdom, use that directly. Reported-by: Sujith Manoharan Tested-by: Sujith Manoharan Reported-by: Bob Copeland Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2193f62..8c114e8 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1848,7 +1848,7 @@ static void restore_regulatory_settings(bool reset_user) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true, cfg80211_world_regdom); + reset_regdomains(true, &world_regdom); restore_alpha2(alpha2, reset_user); /* -- cgit v0.10.2 From d6b67c6c0c54c1b18507c15cf1667a362959a0d3 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Sat, 8 Dec 2012 07:08:25 +0200 Subject: Bluetooth: Remove unnecessary include l2cap.h This patch removes unnecessary include of in bluetooth/bnep/core.c. Signed-off-by: Rami Rosen Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c index a5b6397..e430b1a 100644 --- a/net/bluetooth/bnep/core.c +++ b/net/bluetooth/bnep/core.c @@ -33,7 +33,6 @@ #include #include -#include #include "bnep.h" -- cgit v0.10.2 From 7952861f4a8d67b6624b2e6c92cd63bd11a332ce Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 18 Dec 2012 11:48:01 +0200 Subject: Bluetooth: remove an unused variable in a header file This patch removes srej_queue_next from include/net/bluetooth/l2cap.h as it is not used. Signed-off-by: Rami Rosen Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 7588ef4..cdd3302 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -496,7 +496,6 @@ struct l2cap_chan { __u16 frames_sent; __u16 unacked_frames; __u8 retry_count; - __u16 srej_queue_next; __u16 sdu_len; struct sk_buff *sdu; struct sk_buff *sdu_last_frag; -- cgit v0.10.2 From 8e05e3ba88adcf7ac644e6ef26676ea7c048a08c Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 7 Dec 2012 14:59:05 +0200 Subject: Bluetooth: AMP: Send A2MP Create Phylink Rsp after Assoc write Postpone sending A2MP Create Phylink Response until we got successful HCI Command Complete after HCI Write Remote AMP Assoc. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index 42f2176..8b39327 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -23,6 +23,7 @@ enum amp_mgr_state { READ_LOC_AMP_INFO, READ_LOC_AMP_ASSOC, READ_LOC_AMP_ASSOC_FINAL, + WRITE_REMOTE_AMP_ASSOC, }; struct amp_mgr { @@ -144,5 +145,6 @@ void a2mp_discover_amp(struct l2cap_chan *chan); void a2mp_send_getinfo_rsp(struct hci_dev *hdev); void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status); void a2mp_send_create_phy_link_req(struct hci_dev *hdev, u8 status); +void a2mp_send_create_phy_link_rsp(struct hci_dev *hdev, u8 status); #endif /* __A2MP_H */ diff --git a/net/bluetooth/a2mp.c b/net/bluetooth/a2mp.c index 2f67d5e..a200edf 100644 --- a/net/bluetooth/a2mp.c +++ b/net/bluetooth/a2mp.c @@ -499,8 +499,16 @@ send_rsp: if (hdev) hci_dev_put(hdev); - a2mp_send(mgr, A2MP_CREATEPHYSLINK_RSP, hdr->ident, sizeof(rsp), - &rsp); + /* Reply error now and success after HCI Write Remote AMP Assoc + command complete with success status + */ + if (rsp.status != A2MP_STATUS_SUCCESS) { + a2mp_send(mgr, A2MP_CREATEPHYSLINK_RSP, hdr->ident, + sizeof(rsp), &rsp); + } else { + mgr->state = WRITE_REMOTE_AMP_ASSOC; + mgr->ident = hdr->ident; + } skb_pull(skb, le16_to_cpu(hdr->len)); return 0; @@ -949,6 +957,32 @@ clean: kfree(req); } +void a2mp_send_create_phy_link_rsp(struct hci_dev *hdev, u8 status) +{ + struct amp_mgr *mgr; + struct a2mp_physlink_rsp rsp; + struct hci_conn *hs_hcon; + + mgr = amp_mgr_lookup_by_state(WRITE_REMOTE_AMP_ASSOC); + if (!mgr) + return; + + hs_hcon = hci_conn_hash_lookup_state(hdev, AMP_LINK, BT_CONNECT); + if (!hs_hcon) { + rsp.status = A2MP_STATUS_UNABLE_START_LINK_CREATION; + } else { + rsp.remote_id = hs_hcon->remote_id; + rsp.status = A2MP_STATUS_SUCCESS; + } + + BT_DBG("%s mgr %p hs_hcon %p status %u", hdev->name, mgr, hs_hcon, + status); + + rsp.local_id = hdev->id; + a2mp_send(mgr, A2MP_CREATEPHYSLINK_RSP, mgr->ident, sizeof(rsp), &rsp); + amp_mgr_put(mgr); +} + void a2mp_discover_amp(struct l2cap_chan *chan) { struct l2cap_conn *conn = chan->conn; diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c index 1b0d92c..5228657 100644 --- a/net/bluetooth/amp.c +++ b/net/bluetooth/amp.c @@ -317,7 +317,9 @@ void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle) if (!hcon) return; - amp_write_rem_assoc_frag(hdev, hcon); + /* Send A2MP create phylink rsp when all fragments are written */ + if (amp_write_rem_assoc_frag(hdev, hcon)) + a2mp_send_create_phy_link_rsp(hdev, 0); } void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle) -- cgit v0.10.2 From 7a9898c6ff67ad640304fd3d02f9a22874483c3d Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 7 Dec 2012 14:59:06 +0200 Subject: Bluetooth: AMP: Clean up logical link create / accept Use chan->hs_hcon instead of lookup by dst address. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c index 5228657..6b829b2 100644 --- a/net/bluetooth/amp.c +++ b/net/bluetooth/amp.c @@ -405,26 +405,20 @@ void amp_physical_cfm(struct hci_conn *bredr_hcon, struct hci_conn *hs_hcon) void amp_create_logical_link(struct l2cap_chan *chan) { + struct hci_conn *hs_hcon = chan->hs_hcon; struct hci_cp_create_accept_logical_link cp; - struct hci_conn *hcon; struct hci_dev *hdev; - BT_DBG("chan %p", chan); + BT_DBG("chan %p hs_hcon %p dst %pMR", chan, hs_hcon, chan->conn->dst); - if (!chan->hs_hcon) + if (!hs_hcon) return; hdev = hci_dev_hold(chan->hs_hcon->hdev); if (!hdev) return; - BT_DBG("chan %p dst %pMR", chan, chan->conn->dst); - - hcon = hci_conn_hash_lookup_ba(hdev, AMP_LINK, chan->conn->dst); - if (!hcon) - goto done; - - cp.phy_handle = hcon->handle; + cp.phy_handle = hs_hcon->handle; cp.tx_flow_spec.id = chan->local_id; cp.tx_flow_spec.stype = chan->local_stype; @@ -440,14 +434,13 @@ void amp_create_logical_link(struct l2cap_chan *chan) cp.rx_flow_spec.acc_lat = cpu_to_le32(chan->remote_acc_lat); cp.rx_flow_spec.flush_to = cpu_to_le32(chan->remote_flush_to); - if (hcon->out) + if (hs_hcon->out) hci_send_cmd(hdev, HCI_OP_CREATE_LOGICAL_LINK, sizeof(cp), &cp); else hci_send_cmd(hdev, HCI_OP_ACCEPT_LOGICAL_LINK, sizeof(cp), &cp); -done: hci_dev_put(hdev); } -- cgit v0.10.2 From cbf54ad104cb2ec6f5734d95be1dc783bea0343b Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 7 Dec 2012 14:59:07 +0200 Subject: Bluetooth: AMP: Remove dead code Remove code which cannot execute. l2cap_conn_add for AMP_LINK might only be invoked when receiving data in l2cap_recv_acldata. But this case is checked in the first statement there. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2c78208..82a3bdc 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1527,17 +1527,12 @@ static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status) BT_DBG("hcon %p conn %p hchan %p", hcon, conn, hchan); switch (hcon->type) { - case AMP_LINK: - conn->mtu = hcon->hdev->block_mtu; - break; - case LE_LINK: if (hcon->hdev->le_mtu) { conn->mtu = hcon->hdev->le_mtu; break; } /* fall through */ - default: conn->mtu = hcon->hdev->acl_mtu; break; -- cgit v0.10.2 From cb6801c640c759fe02c812728c2661bd8ba5a302 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 7 Dec 2012 14:59:08 +0200 Subject: Bluetooth: AMP: Use set_bit / test_bit for amp_mgr state Using bit operations solves problems with multiple requests and clearing state. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index 8b39327..487b54c 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -34,7 +34,7 @@ struct amp_mgr { struct kref kref; __u8 ident; __u8 handle; - enum amp_mgr_state state; + unsigned long state; unsigned long flags; struct list_head amp_ctrls; diff --git a/net/bluetooth/a2mp.c b/net/bluetooth/a2mp.c index a200edf..eb0f4b1 100644 --- a/net/bluetooth/a2mp.c +++ b/net/bluetooth/a2mp.c @@ -290,7 +290,7 @@ static int a2mp_getinfo_req(struct amp_mgr *mgr, struct sk_buff *skb, goto done; } - mgr->state = READ_LOC_AMP_INFO; + set_bit(READ_LOC_AMP_INFO, &mgr->state); hci_send_cmd(hdev, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL); done: @@ -506,7 +506,7 @@ send_rsp: a2mp_send(mgr, A2MP_CREATEPHYSLINK_RSP, hdr->ident, sizeof(rsp), &rsp); } else { - mgr->state = WRITE_REMOTE_AMP_ASSOC; + set_bit(WRITE_REMOTE_AMP_ASSOC, &mgr->state); mgr->ident = hdr->ident; } @@ -848,7 +848,7 @@ struct amp_mgr *amp_mgr_lookup_by_state(u8 state) mutex_lock(&_mgr_list_lock); list_for_each_entry(mgr, &_mgr_list, list) { - if (mgr->state == state) { + if (test_and_clear_bit(state, &mgr->state)) { amp_mgr_get(mgr); mutex_unlock(&_mgr_list_lock); return mgr; diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c index 6b829b2..d459ed4 100644 --- a/net/bluetooth/amp.c +++ b/net/bluetooth/amp.c @@ -236,7 +236,7 @@ void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr) cp.max_len = cpu_to_le16(hdev->amp_assoc_size); - mgr->state = READ_LOC_AMP_ASSOC; + set_bit(READ_LOC_AMP_ASSOC, &mgr->state); hci_send_cmd(hdev, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp); } @@ -250,7 +250,7 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev, cp.len_so_far = cpu_to_le16(0); cp.max_len = cpu_to_le16(hdev->amp_assoc_size); - mgr->state = READ_LOC_AMP_ASSOC_FINAL; + set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); /* Read Local AMP Assoc final link information data */ hci_send_cmd(hdev, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp); -- cgit v0.10.2 From 47c37941b8895557409db286e6a441e6d557d62f Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Thu, 13 Dec 2012 15:11:20 +0100 Subject: Bluetooth: mgmt: Remove not needed restriction on add/remove OOB data Those commands don't send any HCI commands to controller so there is no need to restrict them to only powered up controller. This also makes implementation more consistent as already stored remote OOB data persist power toggle. Signed-off-by: Szymon Janc Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index f559b96..ef38582 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2254,13 +2254,6 @@ static int add_remote_oob_data(struct sock *sk, struct hci_dev *hdev, hci_dev_lock(hdev); - if (!hdev_is_powered(hdev)) { - err = cmd_complete(sk, hdev->id, MGMT_OP_ADD_REMOTE_OOB_DATA, - MGMT_STATUS_NOT_POWERED, &cp->addr, - sizeof(cp->addr)); - goto unlock; - } - err = hci_add_remote_oob_data(hdev, &cp->addr.bdaddr, cp->hash, cp->randomizer); if (err < 0) @@ -2271,7 +2264,6 @@ static int add_remote_oob_data(struct sock *sk, struct hci_dev *hdev, err = cmd_complete(sk, hdev->id, MGMT_OP_ADD_REMOTE_OOB_DATA, status, &cp->addr, sizeof(cp->addr)); -unlock: hci_dev_unlock(hdev); return err; } @@ -2287,14 +2279,6 @@ static int remove_remote_oob_data(struct sock *sk, struct hci_dev *hdev, hci_dev_lock(hdev); - if (!hdev_is_powered(hdev)) { - err = cmd_complete(sk, hdev->id, - MGMT_OP_REMOVE_REMOTE_OOB_DATA, - MGMT_STATUS_NOT_POWERED, &cp->addr, - sizeof(cp->addr)); - goto unlock; - } - err = hci_remove_remote_oob_data(hdev, &cp->addr.bdaddr); if (err < 0) status = MGMT_STATUS_INVALID_PARAMS; @@ -2304,7 +2288,6 @@ static int remove_remote_oob_data(struct sock *sk, struct hci_dev *hdev, err = cmd_complete(sk, hdev->id, MGMT_OP_REMOVE_REMOTE_OOB_DATA, status, &cp->addr, sizeof(cp->addr)); -unlock: hci_dev_unlock(hdev); return err; } -- cgit v0.10.2 From a6785be2f76e2c39b3008820e7bfef8f5fd838bc Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Thu, 13 Dec 2012 15:11:21 +0100 Subject: Bluetooth: mgmt: Avoid using magic number in status code Use MGMT_STATUS_SUCCESS for success return code. Signed-off-by: Szymon Janc Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index ef38582..e5502a5 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2259,7 +2259,7 @@ static int add_remote_oob_data(struct sock *sk, struct hci_dev *hdev, if (err < 0) status = MGMT_STATUS_FAILED; else - status = 0; + status = MGMT_STATUS_SUCCESS; err = cmd_complete(sk, hdev->id, MGMT_OP_ADD_REMOTE_OOB_DATA, status, &cp->addr, sizeof(cp->addr)); @@ -2283,7 +2283,7 @@ static int remove_remote_oob_data(struct sock *sk, struct hci_dev *hdev, if (err < 0) status = MGMT_STATUS_INVALID_PARAMS; else - status = 0; + status = MGMT_STATUS_SUCCESS; err = cmd_complete(sk, hdev->id, MGMT_OP_REMOVE_REMOTE_OOB_DATA, status, &cp->addr, sizeof(cp->addr)); @@ -2515,7 +2515,7 @@ static int block_device(struct sock *sk, struct hci_dev *hdev, void *data, if (err < 0) status = MGMT_STATUS_FAILED; else - status = 0; + status = MGMT_STATUS_SUCCESS; err = cmd_complete(sk, hdev->id, MGMT_OP_BLOCK_DEVICE, status, &cp->addr, sizeof(cp->addr)); @@ -2540,7 +2540,7 @@ static int unblock_device(struct sock *sk, struct hci_dev *hdev, void *data, if (err < 0) status = MGMT_STATUS_INVALID_PARAMS; else - status = 0; + status = MGMT_STATUS_SUCCESS; err = cmd_complete(sk, hdev->id, MGMT_OP_UNBLOCK_DEVICE, status, &cp->addr, sizeof(cp->addr)); -- cgit v0.10.2 From 72a525cbb8037ecf8663720b7087e8e6fc77a49a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 6 Jan 2013 21:48:50 +0100 Subject: ssb: add place for serial flash driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index ff3c8a2..f7305e2 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS If unsure, say N +config SSB_SFLASH + bool "SSB serial flash support" + depends on SSB_DRIVER_MIPS && BROKEN + default y + # Assumption: We are on embedded, if we compile the MIPS core. config SSB_EMBEDDED bool diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index 9159ba7..b1ddc11 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o # built-in drivers ssb-y += driver_chipcommon.o ssb-y += driver_chipcommon_pmu.o +ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c new file mode 100644 index 0000000..8662697 --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c @@ -0,0 +1,18 @@ +/* + * Sonics Silicon Backplane + * ChipCommon serial flash interface + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include + +#include "ssb_private.h" + +/* Initialize serial flash access */ +int ssb_sflash_init(struct ssb_chipcommon *cc) +{ + pr_err("Serial flash support is not implemented yet!\n"); + + return -ENOTSUPP; +} diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 5bd05b1..2a7684c 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -203,7 +203,8 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { case SSB_CHIPCO_FLASHT_STSER: case SSB_CHIPCO_FLASHT_ATSER: - pr_err("Serial flash not supported\n"); + pr_debug("Found serial flash\n"); + ssb_sflash_init(&bus->chipco); break; case SSB_CHIPCO_FLASHT_PARA: pr_debug("Found parallel flash\n"); diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index 6c10b66..77d9426 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -217,6 +217,17 @@ extern u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); +/* driver_chipcommon_sflash.c */ +#ifdef CONFIG_SSB_SFLASH +int ssb_sflash_init(struct ssb_chipcommon *cc); +#else +static inline int ssb_sflash_init(struct ssb_chipcommon *cc) +{ + pr_err("Serial flash not supported\n"); + return 0; +} +#endif /* CONFIG_SSB_SFLASH */ + #ifdef CONFIG_SSB_DRIVER_EXTIF extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); -- cgit v0.10.2 From 4656b8f680b4405d68a84e6223b1709b3e1944a6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Jan 2013 13:53:46 +0530 Subject: ath9k_hw: Do not enable IQ-CAL for half/quarter rates IQ calibration doesn't complete and times out for half/quarter rates, so skip it correctly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index fa67e84..61caf1c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1013,7 +1013,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, } } - if (!(ah->enabled_cals & TX_IQ_CAL)) + if ((IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan)) || + !(ah->enabled_cals & TX_IQ_CAL)) goto skip_tx_iqcal; /* Do Tx IQ Calibration */ @@ -1040,12 +1041,10 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_req(ah, &is_reusable); - if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) { - txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); - udelay(5); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); - } + txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); + udelay(5); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { -- cgit v0.10.2 From dfcca60b884185cc1e12de932156bd806d896747 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Jan 2013 13:53:47 +0530 Subject: ath9k_hw: Fix MCI init for AGC calibration When AGC calibration is to be done, a GPM message with the payload, MCI_GPM_WLAN_CAL_REQ has to be sent. Currently this falls within the IQ-CAL code block which is incorrect. Fix this by using a separate variable to decide when IQ-CAL is to be done separately and call ar9003_mci_init_cal_req correctly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 61caf1c..15f9b89 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -967,7 +967,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata = ah->caldata; bool txiqcal_done = false, txclcal_done = false; bool is_reusable = true, status = true; - bool run_rtt_cal = false, run_agc_cal; + bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false; bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | AR_PHY_AGC_CONTROL_FLTR_CAL | @@ -1034,19 +1034,22 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, REG_CLR_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); txiqcal_done = run_agc_cal = true; - goto skip_tx_iqcal; - } else if (caldata && !caldata->done_txiqcal_once) + } else if (caldata && !caldata->done_txiqcal_once) { run_agc_cal = true; + sep_iq_cal = true; + } +skip_tx_iqcal: if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_req(ah, &is_reusable); - txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); - udelay(5); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + if (sep_iq_cal) { + txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); + udelay(5); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + } -skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { /* Calibrate the AGC */ REG_WRITE(ah, AR_PHY_AGC_CONTROL, -- cgit v0.10.2 From 96da6fdd5ae28568be63ccf1f70b14a72135d493 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Jan 2013 14:43:33 +0530 Subject: ath9k_hw: Use helper routines to simplify ar9003_hw_init_cal() Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 15f9b89..9221f32 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -960,22 +960,68 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g) AR_PHY_65NM_RXRF_AGC_AGC_CAL_OVR, 0); } +static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int i; + + if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah)) + return; + + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue; + ar9003_hw_manual_peak_cal(ah, i, IS_CHAN_2GHZ(chan)); + } +} + +static void ar9003_hw_cl_cal_post_proc(struct ath_hw *ah, bool is_reusable) +{ + u32 cl_idx[AR9300_MAX_CHAINS] = { AR_PHY_CL_TAB_0, + AR_PHY_CL_TAB_1, + AR_PHY_CL_TAB_2 }; + struct ath9k_hw_cal_data *caldata = ah->caldata; + bool txclcal_done = false; + int i, j; + + if (!caldata || !(ah->enabled_cals & TX_CL_CAL)) + return; + + txclcal_done = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & + AR_PHY_AGC_CONTROL_CLC_SUCCESS); + + if (caldata->done_txclcal_once) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->txchainmask & (1 << i))) + continue; + for (j = 0; j < MAX_CL_TAB_ENTRY; j++) + REG_WRITE(ah, CL_TAB_ENTRY(cl_idx[i]), + caldata->tx_clcal[i][j]); + } + } else if (is_reusable && txclcal_done) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->txchainmask & (1 << i))) + continue; + for (j = 0; j < MAX_CL_TAB_ENTRY; j++) + caldata->tx_clcal[i][j] = + REG_READ(ah, CL_TAB_ENTRY(cl_idx[i])); + } + caldata->done_txclcal_once = true; + } +} + static bool ar9003_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = ah->caldata; - bool txiqcal_done = false, txclcal_done = false; + bool txiqcal_done = false; bool is_reusable = true, status = true; bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false; bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | AR_PHY_AGC_CONTROL_FLTR_CAL | AR_PHY_AGC_CONTROL_PKDET_CAL; - int i, j; - u32 cl_idx[AR9300_MAX_CHAINS] = { AR_PHY_CL_TAB_0, - AR_PHY_CL_TAB_1, - AR_PHY_CL_TAB_2 }; if (rtt) { if (!ar9003_hw_rtt_restore(ah, chan)) @@ -1060,14 +1106,8 @@ skip_tx_iqcal: status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT); - if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->rxchainmask & (1 << i))) - continue; - ar9003_hw_manual_peak_cal(ah, i, - IS_CHAN_2GHZ(chan)); - } - } + + ar9003_hw_do_manual_peak_cal(ah, chan); } if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) @@ -1092,31 +1132,7 @@ skip_tx_iqcal: else if (caldata && caldata->done_txiqcal_once) ar9003_hw_tx_iq_cal_reload(ah); -#define CL_TAB_ENTRY(reg_base) (reg_base + (4 * j)) - if (caldata && (ah->enabled_cals & TX_CL_CAL)) { - txclcal_done = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & - AR_PHY_AGC_CONTROL_CLC_SUCCESS); - if (caldata->done_txclcal_once) { - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->txchainmask & (1 << i))) - continue; - for (j = 0; j < MAX_CL_TAB_ENTRY; j++) - REG_WRITE(ah, CL_TAB_ENTRY(cl_idx[i]), - caldata->tx_clcal[i][j]); - } - } else if (is_reusable && txclcal_done) { - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->txchainmask & (1 << i))) - continue; - for (j = 0; j < MAX_CL_TAB_ENTRY; j++) - caldata->tx_clcal[i][j] = - REG_READ(ah, - CL_TAB_ENTRY(cl_idx[i])); - } - caldata->done_txclcal_once = true; - } - } -#undef CL_TAB_ENTRY + ar9003_hw_cl_cal_post_proc(ah, is_reusable); if (run_rtt_cal && caldata) { if (is_reusable) { diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 38c5a87..39a226f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -397,6 +397,7 @@ enum ath9k_int { #define MAX_RTT_TABLE_ENTRY 6 #define MAX_IQCAL_MEASUREMENT 8 #define MAX_CL_TAB_ENTRY 16 +#define CL_TAB_ENTRY(reg_base) (reg_base + (4 * j)) struct ath9k_hw_cal_data { u16 channel; -- cgit v0.10.2 From 9b0b11fb1e286e03ce911b94844952edd05f554e Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Tue, 8 Jan 2013 10:16:05 +0530 Subject: mwl8k: Disable tx_wait completion Whenever TX ring is drained, priv->tx_wait still points to a valid completion. Making sure that it points to NULL before returning from the mwl8k_tx_wait_empty check. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index c4d287b..04442c6 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1588,6 +1588,7 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) rc = -ETIMEDOUT; } + priv->tx_wait = NULL; spin_unlock_bh(&priv->tx_lock); return rc; -- cgit v0.10.2 From 0dd13a48a913f096cb44dbcb6c1daebd94b2cf84 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Tue, 8 Jan 2013 10:16:37 +0530 Subject: mwl8k: Delete ampdu streams with state AMPDU_STREAM_NEW in sta remove When a station deauths, we do not delete the streams with state AMPDU_STREAM_NEW and these remain created forever. Fix this issue by removing such streams in the driver Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 04442c6..fc4d4a4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3935,7 +3935,30 @@ static int mwl8k_cmd_set_new_stn_del(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u8 *addr) { struct mwl8k_cmd_set_new_stn *cmd; - int rc; + struct mwl8k_priv *priv = hw->priv; + int rc, i; + u8 idx; + + spin_lock(&priv->stream_lock); + /* Destroy any active ampdu streams for this sta */ + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { + struct mwl8k_ampdu_stream *s; + s = &priv->ampdu[i]; + if (s->state != AMPDU_NO_STREAM) { + if (memcmp(s->sta->addr, addr, ETH_ALEN) == 0) { + if (s->state == AMPDU_STREAM_ACTIVE) { + idx = s->idx; + spin_unlock(&priv->stream_lock); + mwl8k_destroy_ba(hw, idx); + spin_lock(&priv->stream_lock); + } else if (s->state == AMPDU_STREAM_NEW) { + mwl8k_remove_stream(hw, s); + } + } + } + } + + spin_unlock(&priv->stream_lock); cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); if (cmd == NULL) -- cgit v0.10.2 From 4850b6d355b457738fe7d872c833474dbec25304 Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Tue, 8 Jan 2013 12:10:53 +0530 Subject: mwl8k: Wake up queues in mwl8k_start If queues are stopped in mwl8k_stop, these should be started in mwl8k_start Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index fc4d4a4..a9c0788 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4531,6 +4531,8 @@ static int mwl8k_start(struct ieee80211_hw *hw) priv->irq = -1; tasklet_disable(&priv->poll_tx_task); tasklet_disable(&priv->poll_rx_task); + } else { + ieee80211_wake_queues(hw); } return rc; -- cgit v0.10.2 From 3a6a62fbc99e1b49a5f7b9d926a7061cc623a1c2 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 8 Jan 2013 20:57:51 +0530 Subject: ath9k_hw: Update initvals for QCA955x Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h index df97f21..ccc5b6c 100644 --- a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h @@ -23,16 +23,16 @@ static const u32 ar955x_1p0_radio_postamble[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x00016098, 0xd2dd5554, 0xd2dd5554, 0xd28b3330, 0xd28b3330}, - {0x0001609c, 0x0a566f3a, 0x0a566f3a, 0x06345f2a, 0x06345f2a}, - {0x000160ac, 0xa4647c00, 0xa4647c00, 0xa4646800, 0xa4646800}, - {0x000160b0, 0x01885f52, 0x01885f52, 0x04accf3a, 0x04accf3a}, - {0x00016104, 0xb7a00001, 0xb7a00001, 0xb7a00001, 0xb7a00001}, + {0x0001609c, 0x0a566f3a, 0x0a566f3a, 0x0a566f3a, 0x0a566f3a}, + {0x000160ac, 0xa4647c00, 0xa4647c00, 0x24647c00, 0x24647c00}, + {0x000160b0, 0x01885f52, 0x01885f52, 0x01885f52, 0x01885f52}, + {0x00016104, 0xb7a00000, 0xb7a00000, 0xb7a00001, 0xb7a00001}, {0x0001610c, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000}, {0x00016140, 0x10804008, 0x10804008, 0x10804008, 0x10804008}, - {0x00016504, 0xb7a00001, 0xb7a00001, 0xb7a00001, 0xb7a00001}, + {0x00016504, 0xb7a00000, 0xb7a00000, 0xb7a00001, 0xb7a00001}, {0x0001650c, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000}, {0x00016540, 0x10804008, 0x10804008, 0x10804008, 0x10804008}, - {0x00016904, 0xb7a00001, 0xb7a00001, 0xb7a00001, 0xb7a00001}, + {0x00016904, 0xb7a00000, 0xb7a00000, 0xb7a00001, 0xb7a00001}, {0x0001690c, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000}, {0x00016940, 0x10804008, 0x10804008, 0x10804008, 0x10804008}, }; @@ -69,15 +69,15 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = { {0x0000a204, 0x005c0ec0, 0x005c0ec4, 0x005c0ec4, 0x005c0ec0}, {0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004}, {0x0000a22c, 0x07e26a2f, 0x07e26a2f, 0x01026a2f, 0x01026a2f}, - {0x0000a230, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b}, + {0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b}, {0x0000a234, 0x00000fff, 0x10000fff, 0x10000fff, 0x00000fff}, {0x0000a238, 0xffb01018, 0xffb01018, 0xffb01018, 0xffb01018}, {0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108}, {0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898}, {0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002}, - {0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e}, + {0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01010e0e, 0x01010e0e}, {0x0000a260, 0x0a021501, 0x0a021501, 0x3a021501, 0x3a021501}, - {0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e}, + {0x0000a264, 0x00000e0e, 0x00000e0e, 0x01000e0e, 0x01000e0e}, {0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b}, {0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010}, {0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110}, @@ -125,7 +125,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016094, 0x00000000}, {0x000160a0, 0x0a108ffe}, {0x000160a4, 0x812fc370}, - {0x000160a8, 0x423c8000}, + {0x000160a8, 0x423c8100}, {0x000160b4, 0x92480080}, {0x000160c0, 0x006db6d0}, {0x000160c4, 0x6db6db60}, @@ -134,7 +134,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016100, 0x11999601}, {0x00016108, 0x00080010}, {0x00016144, 0x02084080}, - {0x00016148, 0x000080c0}, + {0x00016148, 0x00008040}, {0x00016280, 0x01800804}, {0x00016284, 0x00038dc5}, {0x00016288, 0x00000000}, @@ -178,7 +178,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016500, 0x11999601}, {0x00016508, 0x00080010}, {0x00016544, 0x02084080}, - {0x00016548, 0x000080c0}, + {0x00016548, 0x00008040}, {0x00016780, 0x00000000}, {0x00016784, 0x00000000}, {0x00016788, 0x00400705}, @@ -218,7 +218,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016900, 0x11999601}, {0x00016908, 0x00080010}, {0x00016944, 0x02084080}, - {0x00016948, 0x000080c0}, + {0x00016948, 0x00008040}, {0x00016b80, 0x00000000}, {0x00016b84, 0x00000000}, {0x00016b88, 0x00400705}, @@ -245,9 +245,9 @@ static const u32 ar955x_1p0_radio_core[][2] = { static const u32 ar955x_1p0_modes_xpa_tx_gain_table[][9] = { /* Addr 5G_HT20_L 5G_HT40_L 5G_HT20_M 5G_HT40_M 5G_HT20_H 5G_HT40_H 2G_HT40 2G_HT20 */ - {0x0000a2dc, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xfffd5aaa, 0xfffd5aaa}, - {0x0000a2e0, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xfffe9ccc, 0xfffe9ccc}, - {0x0000a2e4, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xffffe0f0, 0xffffe0f0}, + {0x0000a2dc, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xfffd5aaa, 0xfffd5aaa}, + {0x0000a2e0, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffe9ccc, 0xfffe9ccc}, + {0x0000a2e4, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffffe0f0, 0xffffe0f0}, {0x0000a2e8, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xfffcff00, 0xfffcff00}, {0x0000a410, 0x000050de, 0x000050de, 0x000050de, 0x000050de, 0x000050de, 0x000050de, 0x000050da, 0x000050da}, {0x0000a500, 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000000, 0x00000000}, @@ -256,63 +256,63 @@ static const u32 ar955x_1p0_modes_xpa_tx_gain_table[][9] = { {0x0000a50c, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c000006, 0x0c000006}, {0x0000a510, 0x1000000d, 0x1000000d, 0x1000000d, 0x1000000d, 0x1000000d, 0x1000000d, 0x0f00000a, 0x0f00000a}, {0x0000a514, 0x14000011, 0x14000011, 0x14000011, 0x14000011, 0x14000011, 0x14000011, 0x1300000c, 0x1300000c}, - {0x0000a518, 0x19004008, 0x19004008, 0x19004008, 0x19004008, 0x18004008, 0x18004008, 0x1700000e, 0x1700000e}, - {0x0000a51c, 0x1d00400a, 0x1d00400a, 0x1d00400a, 0x1d00400a, 0x1c00400a, 0x1c00400a, 0x1b000064, 0x1b000064}, - {0x0000a520, 0x230020a2, 0x230020a2, 0x210020a2, 0x210020a2, 0x200020a2, 0x200020a2, 0x1f000242, 0x1f000242}, - {0x0000a524, 0x2500006e, 0x2500006e, 0x2500006e, 0x2500006e, 0x2400006e, 0x2400006e, 0x23000229, 0x23000229}, - {0x0000a528, 0x29022221, 0x29022221, 0x28022221, 0x28022221, 0x27022221, 0x27022221, 0x270002a2, 0x270002a2}, - {0x0000a52c, 0x2d00062a, 0x2d00062a, 0x2c00062a, 0x2c00062a, 0x2a00062a, 0x2a00062a, 0x2c001203, 0x2c001203}, - {0x0000a530, 0x340220a5, 0x340220a5, 0x320220a5, 0x320220a5, 0x2f0220a5, 0x2f0220a5, 0x30001803, 0x30001803}, - {0x0000a534, 0x380022c5, 0x380022c5, 0x350022c5, 0x350022c5, 0x320022c5, 0x320022c5, 0x33000881, 0x33000881}, - {0x0000a538, 0x3b002486, 0x3b002486, 0x39002486, 0x39002486, 0x36002486, 0x36002486, 0x38001809, 0x38001809}, - {0x0000a53c, 0x3f00248a, 0x3f00248a, 0x3d00248a, 0x3d00248a, 0x3a00248a, 0x3a00248a, 0x3a000814, 0x3a000814}, - {0x0000a540, 0x4202242c, 0x4202242c, 0x4102242c, 0x4102242c, 0x3f02242c, 0x3f02242c, 0x3f001a0c, 0x3f001a0c}, - {0x0000a544, 0x490044c6, 0x490044c6, 0x460044c6, 0x460044c6, 0x420044c6, 0x420044c6, 0x43001a0e, 0x43001a0e}, - {0x0000a548, 0x4d024485, 0x4d024485, 0x4a024485, 0x4a024485, 0x46024485, 0x46024485, 0x46001812, 0x46001812}, - {0x0000a54c, 0x51044483, 0x51044483, 0x4e044483, 0x4e044483, 0x4a044483, 0x4a044483, 0x49001884, 0x49001884}, - {0x0000a550, 0x5404a40c, 0x5404a40c, 0x5204a40c, 0x5204a40c, 0x4d04a40c, 0x4d04a40c, 0x4d001e84, 0x4d001e84}, - {0x0000a554, 0x57024632, 0x57024632, 0x55024632, 0x55024632, 0x52024632, 0x52024632, 0x50001e69, 0x50001e69}, - {0x0000a558, 0x5c00a634, 0x5c00a634, 0x5900a634, 0x5900a634, 0x5600a634, 0x5600a634, 0x550006f4, 0x550006f4}, - {0x0000a55c, 0x5f026832, 0x5f026832, 0x5d026832, 0x5d026832, 0x5a026832, 0x5a026832, 0x59000ad3, 0x59000ad3}, - {0x0000a560, 0x6602b012, 0x6602b012, 0x6202b012, 0x6202b012, 0x5d02b012, 0x5d02b012, 0x5e000ad5, 0x5e000ad5}, - {0x0000a564, 0x6e02d0e1, 0x6e02d0e1, 0x6802d0e1, 0x6802d0e1, 0x6002d0e1, 0x6002d0e1, 0x61001ced, 0x61001ced}, - {0x0000a568, 0x7202b4c4, 0x7202b4c4, 0x6c02b4c4, 0x6c02b4c4, 0x6502b4c4, 0x6502b4c4, 0x660018d4, 0x660018d4}, - {0x0000a56c, 0x75007894, 0x75007894, 0x70007894, 0x70007894, 0x6b007894, 0x6b007894, 0x660018d4, 0x660018d4}, - {0x0000a570, 0x7b025c74, 0x7b025c74, 0x75025c74, 0x75025c74, 0x70025c74, 0x70025c74, 0x660018d4, 0x660018d4}, - {0x0000a574, 0x8300bcb5, 0x8300bcb5, 0x7a00bcb5, 0x7a00bcb5, 0x7600bcb5, 0x7600bcb5, 0x660018d4, 0x660018d4}, - {0x0000a578, 0x8a04dc74, 0x8a04dc74, 0x7f04dc74, 0x7f04dc74, 0x7c04dc74, 0x7c04dc74, 0x660018d4, 0x660018d4}, - {0x0000a57c, 0x8a04dc74, 0x8a04dc74, 0x7f04dc74, 0x7f04dc74, 0x7c04dc74, 0x7c04dc74, 0x660018d4, 0x660018d4}, + {0x0000a518, 0x1700002b, 0x1700002b, 0x1700002b, 0x1700002b, 0x1600002b, 0x1600002b, 0x1700000e, 0x1700000e}, + {0x0000a51c, 0x1b00002d, 0x1b00002d, 0x1b00002d, 0x1b00002d, 0x1a00002d, 0x1a00002d, 0x1b000064, 0x1b000064}, + {0x0000a520, 0x20000031, 0x20000031, 0x1f000031, 0x1f000031, 0x1e000031, 0x1e000031, 0x1f000242, 0x1f000242}, + {0x0000a524, 0x24000051, 0x24000051, 0x23000051, 0x23000051, 0x23000051, 0x23000051, 0x23000229, 0x23000229}, + {0x0000a528, 0x27000071, 0x27000071, 0x27000071, 0x27000071, 0x26000071, 0x26000071, 0x270002a2, 0x270002a2}, + {0x0000a52c, 0x2b000092, 0x2b000092, 0x2b000092, 0x2b000092, 0x2b000092, 0x2b000092, 0x2c001203, 0x2c001203}, + {0x0000a530, 0x3000028c, 0x3000028c, 0x2f00028c, 0x2f00028c, 0x2e00028c, 0x2e00028c, 0x30001803, 0x30001803}, + {0x0000a534, 0x34000290, 0x34000290, 0x33000290, 0x33000290, 0x32000290, 0x32000290, 0x33000881, 0x33000881}, + {0x0000a538, 0x37000292, 0x37000292, 0x36000292, 0x36000292, 0x35000292, 0x35000292, 0x38001809, 0x38001809}, + {0x0000a53c, 0x3b02028d, 0x3b02028d, 0x3a02028d, 0x3a02028d, 0x3902028d, 0x3902028d, 0x3a000814, 0x3a000814}, + {0x0000a540, 0x3f020291, 0x3f020291, 0x3e020291, 0x3e020291, 0x3d020291, 0x3d020291, 0x3f001a0c, 0x3f001a0c}, + {0x0000a544, 0x44020490, 0x44020490, 0x43020490, 0x43020490, 0x42020490, 0x42020490, 0x43001a0e, 0x43001a0e}, + {0x0000a548, 0x48020492, 0x48020492, 0x47020492, 0x47020492, 0x46020492, 0x46020492, 0x46001812, 0x46001812}, + {0x0000a54c, 0x4c020692, 0x4c020692, 0x4b020692, 0x4b020692, 0x4a020692, 0x4a020692, 0x49001884, 0x49001884}, + {0x0000a550, 0x50020892, 0x50020892, 0x4f020892, 0x4f020892, 0x4e020892, 0x4e020892, 0x4d001e84, 0x4d001e84}, + {0x0000a554, 0x53040891, 0x53040891, 0x53040891, 0x53040891, 0x52040891, 0x52040891, 0x50001e69, 0x50001e69}, + {0x0000a558, 0x58040893, 0x58040893, 0x57040893, 0x57040893, 0x56040893, 0x56040893, 0x550006f4, 0x550006f4}, + {0x0000a55c, 0x5c0408b4, 0x5c0408b4, 0x5a0408b4, 0x5a0408b4, 0x5a0408b4, 0x5a0408b4, 0x59000ad3, 0x59000ad3}, + {0x0000a560, 0x610408b6, 0x610408b6, 0x5e0408b6, 0x5e0408b6, 0x5e0408b6, 0x5e0408b6, 0x5e000ad5, 0x5e000ad5}, + {0x0000a564, 0x670408f6, 0x670408f6, 0x620408f6, 0x620408f6, 0x620408f6, 0x620408f6, 0x61001ced, 0x61001ced}, + {0x0000a568, 0x6a040cf6, 0x6a040cf6, 0x66040cf6, 0x66040cf6, 0x66040cf6, 0x66040cf6, 0x660018d4, 0x660018d4}, + {0x0000a56c, 0x6d040d76, 0x6d040d76, 0x6a040d76, 0x6a040d76, 0x6a040d76, 0x6a040d76, 0x660018d4, 0x660018d4}, + {0x0000a570, 0x70060db6, 0x70060db6, 0x6e060db6, 0x6e060db6, 0x6e060db6, 0x6e060db6, 0x660018d4, 0x660018d4}, + {0x0000a574, 0x730a0df6, 0x730a0df6, 0x720a0df6, 0x720a0df6, 0x720a0df6, 0x720a0df6, 0x660018d4, 0x660018d4}, + {0x0000a578, 0x770a13f6, 0x770a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x660018d4, 0x660018d4}, + {0x0000a57c, 0x770a13f6, 0x770a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x660018d4, 0x660018d4}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x03804000, 0x03804000}, - {0x0000a610, 0x04c08c01, 0x04c08c01, 0x04808b01, 0x04808b01, 0x04808a01, 0x04808a01, 0x0300ca02, 0x0300ca02}, - {0x0000a614, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00000e04, 0x00000e04}, - {0x0000a618, 0x04010c01, 0x04010c01, 0x03c10b01, 0x03c10b01, 0x03810a01, 0x03810a01, 0x03014000, 0x03014000}, - {0x0000a61c, 0x03814e05, 0x03814e05, 0x03414d05, 0x03414d05, 0x03414d05, 0x03414d05, 0x00000000, 0x00000000}, - {0x0000a620, 0x04010303, 0x04010303, 0x03c10303, 0x03c10303, 0x03810303, 0x03810303, 0x00000000, 0x00000000}, - {0x0000a624, 0x03814e05, 0x03814e05, 0x03414d05, 0x03414d05, 0x03414d05, 0x03414d05, 0x03014000, 0x03014000}, - {0x0000a628, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x03804c05, 0x03804c05}, - {0x0000a62c, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x0701de06, 0x0701de06}, - {0x0000a630, 0x03418000, 0x03418000, 0x03018000, 0x03018000, 0x02c18000, 0x02c18000, 0x07819c07, 0x07819c07}, - {0x0000a634, 0x03815004, 0x03815004, 0x03414f04, 0x03414f04, 0x03414e04, 0x03414e04, 0x0701dc07, 0x0701dc07}, - {0x0000a638, 0x03005302, 0x03005302, 0x02c05202, 0x02c05202, 0x02805202, 0x02805202, 0x0701dc07, 0x0701dc07}, - {0x0000a63c, 0x04c09302, 0x04c09302, 0x04809202, 0x04809202, 0x04809202, 0x04809202, 0x0701dc07, 0x0701dc07}, - {0x0000b2dc, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xfffd5aaa, 0xfffd5aaa}, - {0x0000b2e0, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xfffe9ccc, 0xfffe9ccc}, - {0x0000b2e4, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xffffe0f0, 0xffffe0f0}, + {0x0000a60c, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x03804000, 0x03804000}, + {0x0000a610, 0x04008b01, 0x04008b01, 0x04008b01, 0x04008b01, 0x03c08b01, 0x03c08b01, 0x0300ca02, 0x0300ca02}, + {0x0000a614, 0x05811403, 0x05811403, 0x05411303, 0x05411303, 0x05411303, 0x05411303, 0x00000e04, 0x00000e04}, + {0x0000a618, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x03014000, 0x03014000}, + {0x0000a61c, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x00000000, 0x00000000}, + {0x0000a620, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x00000000, 0x00000000}, + {0x0000a624, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x03014000, 0x03014000}, + {0x0000a628, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x03804c05, 0x03804c05}, + {0x0000a62c, 0x06815604, 0x06815604, 0x06415504, 0x06415504, 0x06015504, 0x06015504, 0x0701de06, 0x0701de06}, + {0x0000a630, 0x07819a05, 0x07819a05, 0x07419905, 0x07419905, 0x07019805, 0x07019805, 0x07819c07, 0x07819c07}, + {0x0000a634, 0x07819e06, 0x07819e06, 0x07419d06, 0x07419d06, 0x07019c06, 0x07019c06, 0x0701dc07, 0x0701dc07}, + {0x0000a638, 0x07819e06, 0x07819e06, 0x07419d06, 0x07419d06, 0x07019c06, 0x07019c06, 0x0701dc07, 0x0701dc07}, + {0x0000a63c, 0x07819e06, 0x07819e06, 0x07419d06, 0x07419d06, 0x07019c06, 0x07019c06, 0x0701dc07, 0x0701dc07}, + {0x0000b2dc, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xfffd5aaa, 0xfffd5aaa}, + {0x0000b2e0, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffe9ccc, 0xfffe9ccc}, + {0x0000b2e4, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffffe0f0, 0xffffe0f0}, {0x0000b2e8, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xfffcff00, 0xfffcff00}, - {0x0000c2dc, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xfffd5aaa, 0xfffd5aaa}, - {0x0000c2e0, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xfffe9ccc, 0xfffe9ccc}, - {0x0000c2e4, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xffffe0f0, 0xffffe0f0}, + {0x0000c2dc, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xfffd5aaa, 0xfffd5aaa}, + {0x0000c2e0, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffe9ccc, 0xfffe9ccc}, + {0x0000c2e4, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffffe0f0, 0xffffe0f0}, {0x0000c2e8, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xfffcff00, 0xfffcff00}, {0x00016044, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x010002d4, 0x010002d4}, - {0x00016048, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x66482401, 0x66482401}, + {0x00016048, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401}, {0x00016280, 0x01801e84, 0x01801e84, 0x01801e84, 0x01801e84, 0x01801e84, 0x01801e84, 0x01808e84, 0x01808e84}, {0x00016444, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x010002d4, 0x010002d4}, - {0x00016448, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x66482401, 0x66482401}, + {0x00016448, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401}, {0x00016844, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x010002d4, 0x010002d4}, - {0x00016848, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x66482401, 0x66482401}, + {0x00016848, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401}, }; static const u32 ar955x_1p0_mac_core[][2] = { @@ -846,7 +846,7 @@ static const u32 ar955x_1p0_baseband_core[][2] = { {0x0000a44c, 0x00000001}, {0x0000a450, 0x00010000}, {0x0000a458, 0x00000000}, - {0x0000a644, 0x3fad9d74}, + {0x0000a644, 0xbfad9d74}, {0x0000a648, 0x0048060a}, {0x0000a64c, 0x00003c37}, {0x0000a670, 0x03020100}, @@ -1277,7 +1277,7 @@ static const u32 ar955x_1p0_modes_fast_clock[][3] = { {0x0000801c, 0x148ec02b, 0x148ec057}, {0x00008318, 0x000044c0, 0x00008980}, {0x00009e00, 0x0372131c, 0x0372131c}, - {0x0000a230, 0x0000000b, 0x00000016}, + {0x0000a230, 0x0000400b, 0x00004016}, {0x0000a254, 0x00000898, 0x00001130}, }; -- cgit v0.10.2 From 2d7caefbafc4ca00cc87ec675c7981e07fa7f37b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 8 Jan 2013 20:57:52 +0530 Subject: ath9k_hw: Add TempCompensation feature for AR9550 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 562186c..881e989 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4586,14 +4586,14 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah, return 0; } -static int ar9003_hw_power_control_override(struct ath_hw *ah, - int frequency, - int *correction, - int *voltage, int *temperature) +static void ar9003_hw_power_control_override(struct ath_hw *ah, + int frequency, + int *correction, + int *voltage, int *temperature) { - int tempSlope = 0; + int temp_slope = 0, temp_slope1 = 0, temp_slope2 = 0; struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; - int f[8], t[8], i; + int f[8], t[8], t1[3], t2[3], i; REG_RMW(ah, AR_PHY_TPC_11_B0, (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), @@ -4624,38 +4624,108 @@ static int ar9003_hw_power_control_override(struct ath_hw *ah, * enable temperature compensation * Need to use register names */ - if (frequency < 4000) - tempSlope = eep->modalHeader2G.tempSlope; - else if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) { - for (i = 0; i < 8; i++) { - t[i] = eep->base_ext1.tempslopextension[i]; - f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0); + if (frequency < 4000) { + temp_slope = eep->modalHeader2G.tempSlope; + } else { + if (AR_SREV_9550(ah)) { + t[0] = eep->base_ext1.tempslopextension[2]; + t1[0] = eep->base_ext1.tempslopextension[3]; + t2[0] = eep->base_ext1.tempslopextension[4]; + f[0] = 5180; + + t[1] = eep->modalHeader5G.tempSlope; + t1[1] = eep->base_ext1.tempslopextension[0]; + t2[1] = eep->base_ext1.tempslopextension[1]; + f[1] = 5500; + + t[2] = eep->base_ext1.tempslopextension[5]; + t1[2] = eep->base_ext1.tempslopextension[6]; + t2[2] = eep->base_ext1.tempslopextension[7]; + f[2] = 5785; + + temp_slope = ar9003_hw_power_interpolate(frequency, + f, t, 3); + temp_slope1 = ar9003_hw_power_interpolate(frequency, + f, t1, 3); + temp_slope2 = ar9003_hw_power_interpolate(frequency, + f, t2, 3); + + goto tempslope; } - tempSlope = ar9003_hw_power_interpolate((s32) frequency, - f, t, 8); - } else if (eep->base_ext2.tempSlopeLow != 0) { - t[0] = eep->base_ext2.tempSlopeLow; - f[0] = 5180; - t[1] = eep->modalHeader5G.tempSlope; - f[1] = 5500; - t[2] = eep->base_ext2.tempSlopeHigh; - f[2] = 5785; - tempSlope = ar9003_hw_power_interpolate((s32) frequency, - f, t, 3); - } else - tempSlope = eep->modalHeader5G.tempSlope; - REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope); + if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) { + for (i = 0; i < 8; i++) { + t[i] = eep->base_ext1.tempslopextension[i]; + f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0); + } + temp_slope = ar9003_hw_power_interpolate((s32) frequency, + f, t, 8); + } else if (eep->base_ext2.tempSlopeLow != 0) { + t[0] = eep->base_ext2.tempSlopeLow; + f[0] = 5180; + t[1] = eep->modalHeader5G.tempSlope; + f[1] = 5500; + t[2] = eep->base_ext2.tempSlopeHigh; + f[2] = 5785; + temp_slope = ar9003_hw_power_interpolate((s32) frequency, + f, t, 3); + } else { + temp_slope = eep->modalHeader5G.tempSlope; + } + } + +tempslope: + if (AR_SREV_9550(ah)) { + /* + * AR955x has tempSlope register for each chain. + * Check whether temp_compensation feature is enabled or not. + */ + if (eep->baseEepHeader.featureEnable & 0x1) { + if (frequency < 4000) { + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.tempSlopeLow); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.tempSlopeHigh); + } else { + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope1); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope2); + } + } else { + /* + * If temp compensation is not enabled, + * set all registers to 0. + */ + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, 0); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, 0); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, 0); + } + } else { + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, temp_slope); + } if (AR_SREV_9462_20(ah)) REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, - AR_PHY_TPC_19_B1_ALPHA_THERM, tempSlope); + AR_PHY_TPC_19_B1_ALPHA_THERM, temp_slope); REG_RMW_FIELD(ah, AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE, temperature[0]); - - return 0; } /* Apply the recorded correction values. */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 1079562..e717741 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -1028,7 +1028,7 @@ #define AR_PHY_TPC_5_B2 (AR_SM2_BASE + 0x208) #define AR_PHY_TPC_6_B2 (AR_SM2_BASE + 0x20c) #define AR_PHY_TPC_11_B2 (AR_SM2_BASE + 0x220) -#define AR_PHY_PDADC_TAB_2 (AR_SM2_BASE + 0x240) +#define AR_PHY_TPC_19_B2 (AR_SM2_BASE + 0x240) #define AR_PHY_TX_IQCAL_STATUS_B2 (AR_SM2_BASE + 0x48c) #define AR_PHY_TX_IQCAL_CORR_COEFF_B2(_i) (AR_SM2_BASE + 0x450 + ((_i) << 2)) -- cgit v0.10.2 From 1a26cda8e0d954257ef2e4e732350232e1506a65 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 8 Jan 2013 20:57:53 +0530 Subject: ath9k_hw: Fix radio programming for AR9550 For AR9550, program the synth value based on the ref. clock. The logic for AR9550 is similar to AR9330, but keep the code separate since changes for AR9330 are required - which would be done later. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index ce19c09..0c4c5a6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -68,7 +68,7 @@ static const int m2ThreshExt_off = 127; static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) { u16 bMode, fracMode = 0, aModeRefSel = 0; - u32 freq, channelSel = 0, reg32 = 0; + u32 freq, chan_frac, div, channelSel = 0, reg32 = 0; struct chan_centers centers; int loadSynthChannel; @@ -77,9 +77,6 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) if (freq < 4800) { /* 2 GHz, fractional mode */ if (AR_SREV_9330(ah)) { - u32 chan_frac; - u32 div; - if (ah->is_clk_25mhz) div = 75; else @@ -89,34 +86,40 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) chan_frac = (((freq * 4) % div) * 0x20000) / div; channelSel = (channelSel << 17) | chan_frac; } else if (AR_SREV_9485(ah) || AR_SREV_9565(ah)) { - u32 chan_frac; - /* - * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0 + * freq_ref = 40 / (refdiva >> amoderefsel); + * where refdiva=1 and amoderefsel=0 * ndiv = ((chan_mhz * 4) / 3) / freq_ref; * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000 */ channelSel = (freq * 4) / 120; chan_frac = (((freq * 4) % 120) * 0x20000) / 120; channelSel = (channelSel << 17) | chan_frac; - } else if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) { + } else if (AR_SREV_9340(ah)) { if (ah->is_clk_25mhz) { - u32 chan_frac; - channelSel = (freq * 2) / 75; chan_frac = (((freq * 2) % 75) * 0x20000) / 75; channelSel = (channelSel << 17) | chan_frac; - } else + } else { channelSel = CHANSEL_2G(freq) >> 1; - } else + } + } else if (AR_SREV_9550(ah)) { + if (ah->is_clk_25mhz) + div = 75; + else + div = 120; + + channelSel = (freq * 4) / div; + chan_frac = (((freq * 4) % div) * 0x20000) / div; + channelSel = (channelSel << 17) | chan_frac; + } else { channelSel = CHANSEL_2G(freq); + } /* Set to 2G mode */ bMode = 1; } else { if ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) && ah->is_clk_25mhz) { - u32 chan_frac; - channelSel = freq / 75; chan_frac = ((freq % 75) * 0x20000) / 75; channelSel = (channelSel << 17) | chan_frac; -- cgit v0.10.2 From e93d083f42a126b5ad8137b5f0e8d6f900b332b8 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 8 Jan 2013 14:48:58 +0100 Subject: ath9k: add spectral scan feature Adds the spectral scan feature for ath9k. AR92xx and AR93xx chips are supported for now. The spectral scan is triggered by configuring a mode through a debugfs control file. Samples can be gathered via another relay debugfs file. Essentially, to try it out: echo chanscan > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl iw dev wlan0 scan cat /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan0 > samples echo disable > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl This feature is still experimental. The special "chanscan" mode is used to perform spectral scan while mac80211 is scanning for channels. To allow this, sw_scan_start/complete() ops have been added. The patch contains code snippets and information from Zefir Kurtisi and information provided by Adrian Chadd and Felix Fietkau. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 8b11981..51b7c81 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -555,6 +555,67 @@ static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); } +void ar9002_hw_spectral_scan_config(struct ath_hw *ah, + struct ath_spec_scan *param) +{ + u8 count; + + if (!param->enabled) { + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ENABLE); + return; + } + REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + + if (param->short_repeat) + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + else + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + + /* on AR92xx, the highest bit of count will make the the chip send + * spectral samples endlessly. Check if this really was intended, + * and fix otherwise. + */ + count = param->count; + if (param->endless) + count = 0; + else if (count & 0x80) + count = 0x7f; + + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_COUNT, count); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_PERIOD, param->period); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period); + + return; +} + +static void ar9002_hw_spectral_scan_trigger(struct ath_hw *ah) +{ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + /* Activate spectral scan */ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE); +} + +static void ar9002_hw_spectral_scan_wait(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + /* Poll for spectral scan complete */ + if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE, + 0, AH_WAIT_TIMEOUT)) { + ath_err(common, "spectral scan wait failed\n"); + return; + } +} + void ar9002_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -569,6 +630,9 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get; ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set; + ops->spectral_scan_config = ar9002_hw_spectral_scan_config; + ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger; + ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait; ar9002_hw_set_nf_limits(ah); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 0c4c5a6..bf119a5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1453,6 +1453,67 @@ set_rfmode: return 0; } +static void ar9003_hw_spectral_scan_config(struct ath_hw *ah, + struct ath_spec_scan *param) +{ + u8 count; + + if (!param->enabled) { + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ENABLE); + return; + } + + REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + + /* on AR93xx and newer, count = 0 will make the the chip send + * spectral samples endlessly. Check if this really was intended, + * and fix otherwise. + */ + count = param->count; + if (param->endless) + count = 0; + else if (param->count == 0) + count = 1; + + if (param->short_repeat) + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + else + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_COUNT, count); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_PERIOD, param->period); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period); + + return; +} + +static void ar9003_hw_spectral_scan_trigger(struct ath_hw *ah) +{ + /* Activate spectral scan */ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE); +} + +static void ar9003_hw_spectral_scan_wait(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + /* Poll for spectral scan complete */ + if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE, + 0, AH_WAIT_TIMEOUT)) { + ath_err(common, "spectral scan wait failed\n"); + return; + } +} + void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -1486,6 +1547,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get; ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set; ops->antctrl_shared_chain_lnadiv = ar9003_hw_antctrl_shared_chain_lnadiv; + ops->spectral_scan_config = ar9003_hw_spectral_scan_config; + ops->spectral_scan_trigger = ar9003_hw_spectral_scan_trigger; + ops->spectral_scan_wait = ar9003_hw_spectral_scan_wait; ar9003_hw_set_nf_limits(ah); ar9003_hw_set_radar_conf(ah); diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 7250107..094a9322 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -670,6 +670,23 @@ struct ath9k_vif_iter_data { int nadhocs; /* number of adhoc vifs */ }; +/* enum spectral_mode: + * + * @SPECTRAL_DISABLED: spectral mode is disabled + * @SPECTRAL_BACKGROUND: hardware sends samples when it is not busy with + * something else. + * @SPECTRAL_MANUAL: spectral scan is enabled, triggering for samples + * is performed manually. + * @SPECTRAL_CHANSCAN: Like manual, but also triggered when changing channels + * during a channel scan. + */ +enum spectral_mode { + SPECTRAL_DISABLED = 0, + SPECTRAL_BACKGROUND, + SPECTRAL_MANUAL, + SPECTRAL_CHANSCAN, +}; + struct ath_softc { struct ieee80211_hw *hw; struct device *dev; @@ -738,6 +755,10 @@ struct ath_softc { u8 ant_tx, ant_rx; struct dfs_pattern_detector *dfs_detector; u32 wow_enabled; + /* relay(fs) channel for spectral scan */ + struct rchan *rfs_chan_spec_scan; + enum spectral_mode spectral_mode; + int scanning; #ifdef CONFIG_PM_SLEEP atomic_t wow_got_bmiss_intr; @@ -746,6 +767,133 @@ struct ath_softc { #endif }; +#define SPECTRAL_SCAN_BITMASK 0x10 +/* Radar info packet format, used for DFS and spectral formats. */ +struct ath_radar_info { + u8 pulse_length_pri; + u8 pulse_length_ext; + u8 pulse_bw_info; +} __packed; + +/* The HT20 spectral data has 4 bytes of additional information at it's end. + * + * [7:0]: all bins {max_magnitude[1:0], bitmap_weight[5:0]} + * [7:0]: all bins max_magnitude[9:2] + * [7:0]: all bins {max_index[5:0], max_magnitude[11:10]} + * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned) + */ +struct ath_ht20_mag_info { + u8 all_bins[3]; + u8 max_exp; +} __packed; + +#define SPECTRAL_HT20_NUM_BINS 56 + +/* WARNING: don't actually use this struct! MAC may vary the amount of + * data by -1/+2. This struct is for reference only. + */ +struct ath_ht20_fft_packet { + u8 data[SPECTRAL_HT20_NUM_BINS]; + struct ath_ht20_mag_info mag_info; + struct ath_radar_info radar_info; +} __packed; + +#define SPECTRAL_HT20_TOTAL_DATA_LEN (sizeof(struct ath_ht20_fft_packet)) + +/* Dynamic 20/40 mode: + * + * [7:0]: lower bins {max_magnitude[1:0], bitmap_weight[5:0]} + * [7:0]: lower bins max_magnitude[9:2] + * [7:0]: lower bins {max_index[5:0], max_magnitude[11:10]} + * [7:0]: upper bins {max_magnitude[1:0], bitmap_weight[5:0]} + * [7:0]: upper bins max_magnitude[9:2] + * [7:0]: upper bins {max_index[5:0], max_magnitude[11:10]} + * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned) + */ +struct ath_ht20_40_mag_info { + u8 lower_bins[3]; + u8 upper_bins[3]; + u8 max_exp; +} __packed; + +#define SPECTRAL_HT20_40_NUM_BINS 128 + +/* WARNING: don't actually use this struct! MAC may vary the amount of + * data. This struct is for reference only. + */ +struct ath_ht20_40_fft_packet { + u8 data[SPECTRAL_HT20_40_NUM_BINS]; + struct ath_ht20_40_mag_info mag_info; + struct ath_radar_info radar_info; +} __packed; + + +#define SPECTRAL_HT20_40_TOTAL_DATA_LEN (sizeof(struct ath_ht20_40_fft_packet)) + +/* grabs the max magnitude from the all/upper/lower bins */ +static inline u16 spectral_max_magnitude(u8 *bins) +{ + return (bins[0] & 0xc0) >> 6 | + (bins[1] & 0xff) << 2 | + (bins[2] & 0x03) << 10; +} + +/* return the max magnitude from the all/upper/lower bins */ +static inline u8 spectral_max_index(u8 *bins) +{ + s8 m = (bins[2] & 0xfc) >> 2; + + /* TODO: this still doesn't always report the right values ... */ + if (m > 32) + m |= 0xe0; + else + m &= ~0xe0; + + return m + 29; +} + +/* return the bitmap weight from the all/upper/lower bins */ +static inline u8 spectral_bitmap_weight(u8 *bins) +{ + return bins[0] & 0x3f; +} + +/* FFT sample format given to userspace via debugfs. + * + * Please keep the type/length at the front position and change + * other fields after adding another sample type + * + * TODO: this might need rework when switching to nl80211-based + * interface. + */ +enum ath_fft_sample_type { + ATH_FFT_SAMPLE_HT20 = 0, +}; + +struct fft_sample_tlv { + u8 type; /* see ath_fft_sample */ + u16 length; + /* type dependent data follows */ +} __packed; + +struct fft_sample_ht20 { + struct fft_sample_tlv tlv; + + u8 __alignment; + + u16 freq; + s8 rssi; + s8 noise; + + u16 max_magnitude; + u8 max_index; + u8 bitmap_weight; + + u64 tsf; + + u16 data[SPECTRAL_HT20_NUM_BINS]; +} __packed; + void ath9k_tasklet(unsigned long data); int ath_cabq_update(struct ath_softc *); @@ -768,6 +916,10 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw); void ath9k_reload_chainmask_settings(struct ath_softc *sc); bool ath9k_uses_beacons(int type); +void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw); +int ath9k_spectral_scan_config(struct ieee80211_hw *hw, + enum spectral_mode spectral_mode); + #ifdef CONFIG_ATH9K_PCI int ath_pci_init(void); diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 13ff9ed..75b504b 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include "ath9k.h" @@ -966,6 +967,112 @@ static const struct file_operations fops_recv = { .llseek = default_llseek, }; +static ssize_t read_file_spec_scan_ctl(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char *mode = ""; + unsigned int len; + + switch (sc->spectral_mode) { + case SPECTRAL_DISABLED: + mode = "disable"; + break; + case SPECTRAL_BACKGROUND: + mode = "background"; + break; + case SPECTRAL_CHANSCAN: + mode = "chanscan"; + break; + case SPECTRAL_MANUAL: + mode = "manual"; + break; + } + len = strlen(mode); + return simple_read_from_buffer(user_buf, count, ppos, mode, len); +} + +static ssize_t write_file_spec_scan_ctl(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + char buf[32]; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + + buf[len] = '\0'; + + if (strncmp("trigger", buf, 7) == 0) { + ath9k_spectral_scan_trigger(sc->hw); + } else if (strncmp("background", buf, 9) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_BACKGROUND); + ath_dbg(common, CONFIG, "spectral scan: background mode enabled\n"); + } else if (strncmp("chanscan", buf, 8) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_CHANSCAN); + ath_dbg(common, CONFIG, "spectral scan: channel scan mode enabled\n"); + } else if (strncmp("manual", buf, 6) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_MANUAL); + ath_dbg(common, CONFIG, "spectral scan: manual mode enabled\n"); + } else if (strncmp("disable", buf, 7) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_DISABLED); + ath_dbg(common, CONFIG, "spectral scan: disabled\n"); + } else { + return -EINVAL; + } + + return count; +} + +static const struct file_operations fops_spec_scan_ctl = { + .read = read_file_spec_scan_ctl, + .write = write_file_spec_scan_ctl, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +static struct dentry *create_buf_file_handler(const char *filename, + struct dentry *parent, + umode_t mode, + struct rchan_buf *buf, + int *is_global) +{ + struct dentry *buf_file; + + buf_file = debugfs_create_file(filename, mode, parent, buf, + &relay_file_operations); + *is_global = 1; + return buf_file; +} + +static int remove_buf_file_handler(struct dentry *dentry) +{ + debugfs_remove(dentry); + + return 0; +} + +void ath_debug_send_fft_sample(struct ath_softc *sc, + struct fft_sample_tlv *fft_sample_tlv) +{ + if (!sc->rfs_chan_spec_scan) + return; + + relay_write(sc->rfs_chan_spec_scan, fft_sample_tlv, + fft_sample_tlv->length + sizeof(*fft_sample_tlv)); +} + +static struct rchan_callbacks rfs_spec_scan_cb = { + .create_buf_file = create_buf_file_handler, + .remove_buf_file = remove_buf_file_handler, +}; + + static ssize_t read_file_regidx(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -1780,6 +1887,14 @@ int ath9k_init_debug(struct ath_hw *ah) &fops_base_eeprom); debugfs_create_file("modal_eeprom", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_modal_eeprom); + sc->rfs_chan_spec_scan = relay_open("spectral_scan", + sc->debug.debugfs_phy, + 262144, 4, &rfs_spec_scan_cb, + NULL); + debugfs_create_file("spectral_scan_ctl", S_IRUSR | S_IWUSR, + sc->debug.debugfs_phy, sc, + &fops_spec_scan_ctl); + #ifdef CONFIG_ATH9K_MAC_DEBUG debugfs_create_file("samples", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_samps); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 375c3b4..b19bed7 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -23,6 +23,7 @@ struct ath_txq; struct ath_buf; +struct fft_sample_tlv; #ifdef CONFIG_ATH9K_DEBUGFS #define TX_STAT_INC(q, c) sc->debug.stats.txstats[q].c++ @@ -323,6 +324,10 @@ void ath9k_sta_remove_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); + +void ath_debug_send_fft_sample(struct ath_softc *sc, + struct fft_sample_tlv *fft_sample); + #else #define RX_STAT_INC(c) /* NOP */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 39a226f..d32ebf7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -658,6 +658,37 @@ struct ath_hw_private_ops { }; /** + * struct ath_spec_scan - parameters for Atheros spectral scan + * + * @enabled: enable/disable spectral scan + * @short_repeat: controls whether the chip is in spectral scan mode + * for 4 usec (enabled) or 204 usec (disabled) + * @count: number of scan results requested. There are special meanings + * in some chip revisions: + * AR92xx: highest bit set (>=128) for endless mode + * (spectral scan won't stopped until explicitly disabled) + * AR9300 and newer: 0 for endless mode + * @endless: true if endless mode is intended. Otherwise, count value is + * corrected to the next possible value. + * @period: time duration between successive spectral scan entry points + * (period*256*Tclk). Tclk = ath_common->clockrate + * @fft_period: PHY passes FFT frames to MAC every (fft_period+1)*4uS + * + * Note: Tclk = 40MHz or 44MHz depending upon operating mode. + * Typically it's 44MHz in 2/5GHz on later chips, but there's + * a "fast clock" check for this in 5GHz. + * + */ +struct ath_spec_scan { + bool enabled; + bool short_repeat; + bool endless; + u8 count; + u8 period; + u8 fft_period; +}; + +/** * struct ath_hw_ops - callbacks used by hardware code and driver code * * This structure contains callbacks designed to to be used internally by @@ -665,6 +696,10 @@ struct ath_hw_private_ops { * * @config_pci_powersave: * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC + * + * @spectral_scan_config: set parameters for spectral scan and enable/disable it + * @spectral_scan_trigger: trigger a spectral scan run + * @spectral_scan_wait: wait for a spectral scan run to finish */ struct ath_hw_ops { void (*config_pci_powersave)(struct ath_hw *ah, @@ -685,6 +720,10 @@ struct ath_hw_ops { void (*antdiv_comb_conf_set)(struct ath_hw *ah, struct ath_hw_antcomb_conf *antconf); void (*antctrl_shared_chain_lnadiv)(struct ath_hw *hw, bool enable); + void (*spectral_scan_config)(struct ath_hw *ah, + struct ath_spec_scan *param); + void (*spectral_scan_trigger)(struct ath_hw *ah); + void (*spectral_scan_wait)(struct ath_hw *ah); }; struct ath_nf_limits { diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 5c01f43..90cfcb3 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "ath9k.h" @@ -916,6 +917,11 @@ static void ath9k_deinit_softc(struct ath_softc *sc) sc->dfs_detector->exit(sc->dfs_detector); ath9k_eeprom_release(sc); + + if (sc->rfs_chan_spec_scan) { + relay_close(sc->rfs_chan_spec_scan); + sc->rfs_chan_spec_scan = NULL; + } } void ath9k_deinit_device(struct ath_softc *sc) diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 4a745e6..1ff8170 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -226,7 +226,8 @@ enum ath9k_phyerr { ATH9K_PHYERR_HT_LENGTH_ILLEGAL = 35, ATH9K_PHYERR_HT_RATE_ILLEGAL = 36, - ATH9K_PHYERR_MAX = 37, + ATH9K_PHYERR_SPECTRAL = 38, + ATH9K_PHYERR_MAX = 39, }; struct ath_desc { diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index e1fa705..32417fd 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1075,6 +1075,86 @@ static void ath9k_disable_ps(struct ath_softc *sc) ath_dbg(common, PS, "PowerSave disabled\n"); } +void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + u32 rxfilter; + + if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { + ath_err(common, "spectrum analyzer not implemented on this hardware\n"); + return; + } + + ath9k_ps_wakeup(sc); + rxfilter = ath9k_hw_getrxfilter(ah); + ath9k_hw_setrxfilter(ah, rxfilter | + ATH9K_RX_FILTER_PHYRADAR | + ATH9K_RX_FILTER_PHYERR); + + /* TODO: usually this should not be neccesary, but for some reason + * (or in some mode?) the trigger must be called after the + * configuration, otherwise the register will have its values reset + * (on my ar9220 to value 0x01002310) + */ + ath9k_spectral_scan_config(hw, sc->spectral_mode); + ath9k_hw_ops(ah)->spectral_scan_trigger(ah); + ath9k_ps_restore(sc); +} + +int ath9k_spectral_scan_config(struct ieee80211_hw *hw, + enum spectral_mode spectral_mode) +{ + struct ath_softc *sc = hw->priv; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ath_spec_scan param; + + if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { + ath_err(common, "spectrum analyzer not implemented on this hardware\n"); + return -1; + } + + /* NOTE: this will generate a few samples ... + * + * TODO: review default parameters, and/or define an interface to set + * them. + */ + param.enabled = 1; + param.short_repeat = true; + param.count = 8; + param.endless = false; + param.period = 0xFF; + param.fft_period = 0xF; + + switch (spectral_mode) { + case SPECTRAL_DISABLED: + param.enabled = 0; + break; + case SPECTRAL_BACKGROUND: + /* send endless samples. + * TODO: is this really useful for "background"? + */ + param.endless = 1; + break; + case SPECTRAL_CHANSCAN: + break; + case SPECTRAL_MANUAL: + break; + default: + return -1; + } + + ath9k_ps_wakeup(sc); + ath9k_hw_ops(ah)->spectral_scan_config(ah, ¶m); + ath9k_ps_restore(sc); + + sc->spectral_mode = spectral_mode; + + return 0; +} + static int ath9k_config(struct ieee80211_hw *hw, u32 changed) { struct ath_softc *sc = hw->priv; @@ -1188,6 +1268,11 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) */ if (old_pos >= 0) ath_update_survey_nf(sc, old_pos); + + /* perform spectral scan if requested. */ + if (sc->scanning && sc->spectral_mode == SPECTRAL_CHANSCAN) + ath9k_spectral_scan_trigger(hw); + } if (changed & IEEE80211_CONF_CHANGE_POWER) { @@ -2240,6 +2325,19 @@ static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled) } #endif +static void ath9k_sw_scan_start(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + + sc->scanning = 1; +} + +static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + + sc->scanning = 0; +} struct ieee80211_ops ath9k_ops = { .tx = ath9k_tx, @@ -2286,4 +2384,6 @@ struct ieee80211_ops ath9k_ops = { .sta_add_debugfs = ath9k_sta_add_debugfs, .sta_remove_debugfs = ath9k_sta_remove_debugfs, #endif + .sw_scan_start = ath9k_sw_scan_start, + .sw_scan_complete = ath9k_sw_scan_complete, }; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 3d236ae..45f2d47 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -15,6 +15,7 @@ */ #include +#include #include "ath9k.h" #include "ar9003_mac.h" @@ -1025,6 +1026,108 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, rxs->flag &= ~RX_FLAG_DECRYPTED; } +static s8 fix_rssi_inv_only(u8 rssi_val) +{ + if (rssi_val == 128) + rssi_val = 0; + return (s8) rssi_val; +} + + +static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, + struct ath_rx_status *rs, u64 tsf) +{ +#ifdef CONFIG_ATH_DEBUG + struct ath_hw *ah = sc->sc_ah; + u8 bins[SPECTRAL_HT20_NUM_BINS]; + u8 *vdata = (u8 *)hdr; + struct fft_sample_ht20 fft_sample; + struct ath_radar_info *radar_info; + struct ath_ht20_mag_info *mag_info; + int len = rs->rs_datalen; + int i, dc_pos; + + /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer + * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT + * yet, but this is supposed to be possible as well. + */ + if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && + rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && + rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) + return; + + /* Variation in the data length is possible and will be fixed later. + * Note that we only support HT20 for now. + * + * TODO: add HT20_40 support as well. + */ + if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || + (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) + return; + + /* check if spectral scan bit is set. This does not have to be checked + * if received through a SPECTRAL phy error, but shouldn't hurt. + */ + radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; + if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) + return; + + fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; + fft_sample.tlv.length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + + fft_sample.freq = ah->curchan->chan->center_freq; + fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); + fft_sample.noise = ah->noise; + + switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { + case 0: + /* length correct, nothing to do. */ + memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); + break; + case -1: + /* first byte missing, duplicate it. */ + memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); + bins[0] = vdata[0]; + break; + case 2: + /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ + memcpy(bins, vdata, 30); + bins[30] = vdata[31]; + memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); + break; + case 1: + /* MAC added 2 extra bytes AND first byte is missing. */ + bins[0] = vdata[0]; + memcpy(&bins[0], vdata, 30); + bins[31] = vdata[31]; + memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); + break; + default: + return; + } + + /* DC value (value in the middle) is the blind spot of the spectral + * sample and invalid, interpolate it. + */ + dc_pos = SPECTRAL_HT20_NUM_BINS / 2; + bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; + + /* mag data is at the end of the frame, in front of radar_info */ + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; + + /* Apply exponent and grab further auxiliary information. */ + for (i = 0; i < SPECTRAL_HT20_NUM_BINS; i++) + fft_sample.data[i] = bins[i] << mag_info->max_exp; + + fft_sample.max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_index = spectral_max_index(mag_info->all_bins); + fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); + fft_sample.tsf = tsf; + + ath_debug_send_fft_sample(sc, &fft_sample.tlv); +#endif +} + int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) { struct ath_buf *bf; @@ -1122,6 +1225,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) rxs->mactime += 0x100000000ULL; + if ((rs.rs_status & ATH9K_RXERR_PHY)) + ath_process_fft(sc, hdr, &rs, rxs->mactime); + retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs, rxs, &decrypt_error); if (retval) -- cgit v0.10.2 From 2c2d45bdcb7063ef58dc2c27d72026c394a8f584 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Tue, 27 Nov 2012 15:44:24 +0100 Subject: NFC: Add support for SO_TIMESTAMP LLCP socket option Set timestamp in sent and received sk_buffs. timestamp is then put in msghdr structure in llcp_sock_recvmsg(). Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz diff --git a/net/nfc/llcp/commands.c b/net/nfc/llcp/commands.c index df24be4..c6bc3bd 100644 --- a/net/nfc/llcp/commands.c +++ b/net/nfc/llcp/commands.c @@ -304,6 +304,8 @@ int nfc_llcp_send_symm(struct nfc_dev *dev) skb = llcp_add_header(skb, 0, 0, LLCP_PDU_SYMM); + __net_timestamp(skb); + nfc_llcp_send_to_raw_sock(local, skb, NFC_LLCP_DIRECTION_TX); return nfc_data_exchange(dev, local->target_idx, skb, diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index ec43914..6c59714 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -668,6 +668,8 @@ static void nfc_llcp_tx_work(struct work_struct *work) if (ptype == LLCP_PDU_I) copy_skb = skb_copy(skb, GFP_ATOMIC); + __net_timestamp(skb); + nfc_llcp_send_to_raw_sock(local, skb, NFC_LLCP_DIRECTION_TX); @@ -1245,6 +1247,8 @@ static void nfc_llcp_rx_work(struct work_struct *work) print_hex_dump(KERN_DEBUG, "LLCP Rx: ", DUMP_PREFIX_OFFSET, 16, 1, skb->data, skb->len, true); + __net_timestamp(skb); + nfc_llcp_send_to_raw_sock(local, skb, NFC_LLCP_DIRECTION_RX); switch (ptype) { diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index fea22eb..ba19007 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -678,6 +678,8 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, return -EFAULT; } + sock_recv_timestamp(msg, sk, skb); + if (sk->sk_type == SOCK_DGRAM && msg->msg_name) { struct nfc_llcp_ui_cb *ui_cb = nfc_llcp_ui_skb_cb(skb); struct sockaddr_nfc_llcp sockaddr; -- cgit v0.10.2 From 8d25ca799783788742bc7d9647eec44b6754766e Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:30 +0100 Subject: NFC: pn533: Remove in/out_maxlen as it is not used in_maxlen and out_maxlen was replaced with PN533_NORMAL_FRAME_MAX_LEN Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index ada681b..cf94113 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -349,11 +349,9 @@ struct pn533 { struct nfc_dev *nfc_dev; struct urb *out_urb; - int out_maxlen; struct pn533_frame *out_frame; struct urb *in_urb; - int in_maxlen; struct pn533_frame *in_frame; struct sk_buff_head resp_q; @@ -1454,8 +1452,9 @@ static int pn533_send_poll_frame(struct pn533 *dev) pn533_build_poll_frame(dev, dev->out_frame, cur_mod); rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen, pn533_poll_complete, - NULL, GFP_KERNEL); + PN533_NORMAL_FRAME_MAX_LEN, + pn533_poll_complete, + NULL, GFP_KERNEL); if (rc) nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc); @@ -1567,7 +1566,7 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); if (rc) return rc; @@ -1661,7 +1660,7 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); if (rc) { nfc_dev_err(&dev->interface->dev, "Error when sending release" " command to the controller"); @@ -1822,8 +1821,9 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen, pn533_in_dep_link_up_complete, - cmd, GFP_KERNEL); + PN533_NORMAL_FRAME_MAX_LEN, + pn533_in_dep_link_up_complete, cmd, + GFP_KERNEL); if (rc < 0) kfree(cmd); @@ -2121,8 +2121,9 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) out_frame = (struct pn533_frame *) skb->data; rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, - dev->in_maxlen, pn533_tm_send_complete, - skb, GFP_KERNEL); + PN533_NORMAL_FRAME_MAX_LEN, + pn533_tm_send_complete, skb, + GFP_KERNEL); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); @@ -2217,7 +2218,7 @@ static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); return rc; } @@ -2238,7 +2239,7 @@ static int pn533_fw_reset(struct pn533 *dev) pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); return rc; } @@ -2359,16 +2360,11 @@ static int pn533_probe(struct usb_interface *interface, for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) { - dev->in_maxlen = le16_to_cpu(endpoint->wMaxPacketSize); + if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) in_endpoint = endpoint->bEndpointAddress; - } - if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) { - dev->out_maxlen = - le16_to_cpu(endpoint->wMaxPacketSize); + if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) out_endpoint = endpoint->bEndpointAddress; - } } if (!in_endpoint || !out_endpoint) { @@ -2418,7 +2414,7 @@ static int pn533_probe(struct usb_interface *interface, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); if (rc) goto destroy_wq; -- cgit v0.10.2 From a449ae1cbdcb5ab45c894362602b239e1d8d96c3 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:31 +0100 Subject: NFC: pn533: Remove unused definitions Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index cf94113..ed8ecb3 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -41,11 +41,6 @@ #define SONY_VENDOR_ID 0x054c #define PASORI_PRODUCT_ID 0x02e1 -#define PN533_QUIRKS_TYPE_A BIT(0) -#define PN533_QUIRKS_TYPE_F BIT(1) -#define PN533_QUIRKS_DEP BIT(2) -#define PN533_QUIRKS_RAW_EXCHANGE BIT(3) - #define PN533_DEVICE_STD 0x1 #define PN533_DEVICE_PASORI 0x2 @@ -128,9 +123,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_CMD_MI_MASK 0x40 #define PN533_CMD_RET_SUCCESS 0x00 -/* PN533 status codes */ -#define PN533_STATUS_TARGET_RELEASED 0x29 - struct pn533; typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, -- cgit v0.10.2 From b1bb290ac2308616b24c5986665d7199ff7b9df3 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:32 +0100 Subject: NFC: pn533: Add frame header length define PN533_CMD_DATAEXCH_HEAD_LEN includes a frame header length which is not seen at a glance. It can be missleading, so split it and define the frame header length explicitly. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index ed8ecb3..7040106 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -82,10 +82,12 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_NORMAL_FRAME_MAX_LEN 262 /* 6 (PREAMBLE, SOF, LEN, LCS, TFI) 254 (DATA) 2 (DCS, postamble) */ +#define PN533_FRAME_HEADER_LEN (sizeof(struct pn533_frame) \ + + 2) /* data[0] TFI, data[1] CC */ +#define PN533_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ -#define PN533_FRAME_TAIL_SIZE 2 #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ - PN533_FRAME_TAIL_SIZE) + PN533_FRAME_TAIL_LEN) #define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) #define PN533_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) @@ -1233,7 +1235,7 @@ static int pn533_init_target_frame(struct pn533_frame *frame, return 0; } -#define PN533_CMD_DATAEXCH_HEAD_LEN (sizeof(struct pn533_frame) + 3) +#define PN533_CMD_DATAEXCH_HEAD_LEN 1 #define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) @@ -1261,8 +1263,9 @@ static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, } skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); - skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_SIZE); + skb_pull(skb_resp, + PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); + skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); return nfc_tm_data_received(dev->nfc_dev, skb_resp); } @@ -1276,9 +1279,10 @@ static void pn533_wq_tg_get_data(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_SIZE; + skb_resp_len = PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_CMD_DATAEXCH_DATA_MAXLEN + + PN533_FRAME_TAIL_LEN; skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); if (!skb_resp) @@ -1859,11 +1863,12 @@ static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, return -ENOSYS; } + skb_push(skb, PN533_FRAME_HEADER_LEN); + if (target == true) { switch (dev->device_type) { case PN533_DEVICE_PASORI: if (dev->tgt_active_prot == NFC_PROTO_FELICA) { - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1); out_frame = (struct pn533_frame *) skb->data; pn533_tx_frame_init(out_frame, PN533_CMD_IN_COMM_THRU); @@ -1895,7 +1900,7 @@ static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, out_frame->datalen += payload_len; pn533_tx_frame_finish(out_frame); - skb_put(skb, PN533_FRAME_TAIL_SIZE); + skb_put(skb, PN533_FRAME_TAIL_LEN); return 0; } @@ -1975,8 +1980,9 @@ static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, } skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); + skb_pull(skb_resp, PN533_FRAME_HEADER_LEN); skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_SIZE); + skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); skb_queue_tail(&dev->resp_q, skb_resp); if (status & PN533_CMD_MI_MASK) { @@ -2024,9 +2030,10 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, if (rc) goto error; - skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_SIZE; + skb_resp_len = PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_CMD_DATAEXCH_DATA_MAXLEN + + PN533_FRAME_TAIL_LEN; skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); if (!skb_resp) { @@ -2143,20 +2150,25 @@ static void pn533_wq_mi_recv(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); /* This is a zero payload size skb */ - skb_cmd = alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN + PN533_FRAME_TAIL_SIZE, + skb_cmd = alloc_skb(PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_FRAME_TAIL_LEN, GFP_KERNEL); if (skb_cmd == NULL) goto error_cmd; - skb_reserve(skb_cmd, PN533_CMD_DATAEXCH_HEAD_LEN); + skb_reserve(skb_cmd, + PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); rc = pn533_build_tx_frame(dev, skb_cmd, true); if (rc) goto error_frame; - skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_SIZE; + skb_resp_len = PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_CMD_DATAEXCH_DATA_MAXLEN + + PN533_FRAME_TAIL_LEN; + skb_resp = alloc_skb(skb_resp_len, GFP_KERNEL); if (!skb_resp) { rc = -ENOMEM; @@ -2433,8 +2445,9 @@ static int pn533_probe(struct usb_interface *interface, } dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, + PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN, - PN533_FRAME_TAIL_SIZE); + PN533_FRAME_TAIL_LEN); if (!dev->nfc_dev) goto destroy_wq; -- cgit v0.10.2 From d94ea4f54516b32affeda7ef097b93bca6e6fd32 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:33 +0100 Subject: NFC: pn533: Remove pointless flags param __pn533_send_cmd_frame_async() is called when lock is held so GFP_KERNEL flag will be always used. Thus, having extra param does not optimise the code. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 7040106..5f3459d 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -392,7 +392,6 @@ struct pn533_cmd { int in_frame_len; pn533_cmd_complete_t cmd_complete; void *arg; - gfp_t flags; }; struct pn533_frame { @@ -646,7 +645,7 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, struct pn533_frame *in_frame, int in_frame_len, pn533_cmd_complete_t cmd_complete, - void *arg, gfp_t flags) + void *arg) { int rc; @@ -664,11 +663,11 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, dev->in_urb->transfer_buffer = in_frame; dev->in_urb->transfer_buffer_length = in_frame_len; - rc = usb_submit_urb(dev->out_urb, flags); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); if (rc) return rc; - rc = pn533_submit_urb_for_ack(dev, flags); + rc = pn533_submit_urb_for_ack(dev, GFP_KERNEL); if (rc) goto error; @@ -700,7 +699,7 @@ static void pn533_wq_cmd(struct work_struct *work) __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, cmd->in_frame_len, cmd->cmd_complete, - cmd->arg, cmd->flags); + cmd->arg); kfree(cmd); } @@ -710,7 +709,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, struct pn533_frame *in_frame, int in_frame_len, pn533_cmd_complete_t cmd_complete, - void *arg, gfp_t flags) + void *arg) { struct pn533_cmd *cmd; int rc = 0; @@ -722,7 +721,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, if (!dev->cmd_pending) { rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, cmd_complete, - arg, flags); + arg); if (!rc) dev->cmd_pending = 1; @@ -731,7 +730,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); - cmd = kzalloc(sizeof(struct pn533_cmd), flags); + cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); if (!cmd) { rc = -ENOMEM; goto unlock; @@ -743,7 +742,6 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, cmd->in_frame_len = in_frame_len; cmd->cmd_complete = cmd_complete; cmd->arg = arg; - cmd->flags = flags; list_add_tail(&cmd->queue, &dev->cmd_queue); @@ -788,7 +786,7 @@ static int pn533_send_cmd_frame_sync(struct pn533 *dev, init_completion(&arg.done); rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, - pn533_sync_cmd_complete, &arg, GFP_KERNEL); + pn533_sync_cmd_complete, &arg); if (rc) return rc; @@ -1296,7 +1294,7 @@ static void pn533_wq_tg_get_data(struct work_struct *work) pn533_send_cmd_frame_async(dev, dev->out_frame, in_frame, skb_resp_len, pn533_tm_get_data_complete, - skb_resp, GFP_KERNEL); + skb_resp); return; } @@ -1450,7 +1448,7 @@ static int pn533_send_poll_frame(struct pn533 *dev) rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN, pn533_poll_complete, - NULL, GFP_KERNEL); + NULL); if (rc) nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc); @@ -1818,8 +1816,7 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN, - pn533_in_dep_link_up_complete, cmd, - GFP_KERNEL); + pn533_in_dep_link_up_complete, cmd); if (rc < 0) kfree(cmd); @@ -2056,8 +2053,7 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, arg->cb_context = cb_context; rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, - pn533_data_exchange_complete, arg, - GFP_KERNEL); + pn533_data_exchange_complete, arg); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to" " perform data_exchange", rc); @@ -2121,8 +2117,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN, - pn533_tm_send_complete, skb, - GFP_KERNEL); + pn533_tm_send_complete, skb); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); @@ -2184,7 +2179,7 @@ static void pn533_wq_mi_recv(struct work_struct *work) rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, pn533_data_exchange_complete, - dev->cmd_complete_arg, GFP_KERNEL); + dev->cmd_complete_arg); if (!rc) return; -- cgit v0.10.2 From aada17ac70e33b127c8f8dd425fc735cc0d30e25 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:34 +0100 Subject: NFC: pn533: Add a new pn533_send_cmd_async iface This is intendend to replace pn533_send_cmd_frame_async() which requires from the caller to create a complete frame. The new function constructs a frame and sends it out which hides the frame logic and avoid code duplication. The caller has to allocate skb and put its payload there, and finally provide the skb together with a complete cb to pn533_send_cmd_async(). Response skb is allocated by the core part and pass to the caller cb. Next, the caller has to free it when is not needed anymore or pass it up to the stack. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 5f3459d..89f7474 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -117,6 +117,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_CMD_TG_INIT_AS_TARGET 0x8c #define PN533_CMD_TG_GET_DATA 0x86 #define PN533_CMD_TG_SET_DATA 0x8e +#define PN533_CMD_UNDEF 0xff #define PN533_CMD_RESPONSE(cmd) (cmd + 1) @@ -130,6 +131,9 @@ struct pn533; typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, u8 *params, int params_len); +typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg, + struct sk_buff *resp); + /* structs for pn533 commands */ /* PN533_CMD_GET_FIRMWARE_VERSION */ @@ -390,6 +394,9 @@ struct pn533_cmd { struct pn533_frame *out_frame; struct pn533_frame *in_frame; int in_frame_len; + u8 cmd_code; + struct sk_buff *req; + struct sk_buff *resp; pn533_cmd_complete_t cmd_complete; void *arg; }; @@ -678,6 +685,151 @@ error: return rc; } +static void pn533_build_cmd_frame(u8 cmd_code, struct sk_buff *skb) +{ + struct pn533_frame *frame; + /* payload is already there, just update datalen */ + int payload_len = skb->len; + + skb_push(skb, PN533_FRAME_HEADER_LEN); + skb_put(skb, PN533_FRAME_TAIL_LEN); + + frame = (struct pn533_frame *)skb->data; + + pn533_tx_frame_init(frame, cmd_code); + frame->datalen += payload_len; + pn533_tx_frame_finish(frame); +} + +struct pn533_send_async_complete_arg { + pn533_send_async_complete_t complete_cb; + void *complete_cb_context; + struct sk_buff *resp; + struct sk_buff *req; +}; + +static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, + int params_len) +{ + struct pn533_send_async_complete_arg *arg = _arg; + + struct sk_buff *req = arg->req; + struct sk_buff *resp = arg->resp; + + struct pn533_frame *frame = (struct pn533_frame *)resp->data; + int rc; + + dev_kfree_skb(req); + + if (params_len < 0) { + nfc_dev_err(&dev->interface->dev, + "Error %d when starting as a target", + params_len); + + arg->complete_cb(dev, arg->complete_cb_context, + ERR_PTR(params_len)); + rc = params_len; + dev_kfree_skb(resp); + goto out; + } + + skb_put(resp, PN533_FRAME_SIZE(frame)); + skb_pull(resp, PN533_FRAME_HEADER_LEN); + skb_trim(resp, resp->len - PN533_FRAME_TAIL_LEN); + + rc = arg->complete_cb(dev, arg->complete_cb_context, resp); + +out: + kfree(arg); + return rc; +} + +static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, struct sk_buff *resp, + int resp_len, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct pn533_cmd *cmd; + struct pn533_send_async_complete_arg *arg; + int rc = 0; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + arg = kzalloc(sizeof(arg), GFP_KERNEL); + if (!arg) + return -ENOMEM; + + arg->complete_cb = complete_cb; + arg->complete_cb_context = complete_cb_context; + arg->resp = resp; + arg->req = req; + + pn533_build_cmd_frame(cmd_code, req); + + mutex_lock(&dev->cmd_lock); + + if (!dev->cmd_pending) { + rc = __pn533_send_cmd_frame_async(dev, + (struct pn533_frame *)req->data, + (struct pn533_frame *)resp->data, + resp_len, pn533_send_async_complete, + arg); + if (rc) + goto error; + + dev->cmd_pending = 1; + goto unlock; + } + + nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); + + cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); + if (!cmd) { + rc = -ENOMEM; + goto error; + } + + INIT_LIST_HEAD(&cmd->queue); + cmd->cmd_code = cmd_code; + cmd->req = req; + cmd->resp = resp; + cmd->arg = arg; + + list_add_tail(&cmd->queue, &dev->cmd_queue); + + goto unlock; + +error: + kfree(arg); +unlock: + mutex_unlock(&dev->cmd_lock); + return rc; +} + +static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct sk_buff *resp; + int rc; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + resp = alloc_skb(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + rc = __pn533_send_async(dev, cmd_code, req, resp, + PN533_NORMAL_FRAME_MAX_LEN, + complete_cb, complete_cb_context); + if (rc) + dev_kfree_skb(resp); + + return rc; +} + static void pn533_wq_cmd(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, cmd_work); @@ -697,9 +849,17 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, - cmd->in_frame_len, cmd->cmd_complete, - cmd->arg); + if (cmd->cmd_code != PN533_CMD_UNDEF) + __pn533_send_cmd_frame_async(dev, + (struct pn533_frame *)cmd->req->data, + (struct pn533_frame *)cmd->resp->data, + PN533_NORMAL_FRAME_MAX_LEN, + pn533_send_async_complete, + cmd->arg); + else + __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, + cmd->in_frame_len, + cmd->cmd_complete, cmd->arg); kfree(cmd); } @@ -740,6 +900,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, cmd->out_frame = out_frame; cmd->in_frame = in_frame; cmd->in_frame_len = in_frame_len; + cmd->cmd_code = PN533_CMD_UNDEF; cmd->cmd_complete = cmd_complete; cmd->arg = arg; -- cgit v0.10.2 From 15461aeb53ae2d3bbde6b374de913e3df81d1ad0 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:35 +0100 Subject: NFC: pn533: Add a new pn533_send_data_async iface This iface is intended to be used with DEP transfers. It differs from pn533_send_cmd_async() in the way the response skb is allocated. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 89f7474..0e9bf9d 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -86,6 +86,12 @@ MODULE_DEVICE_TABLE(usb, pn533_table); + 2) /* data[0] TFI, data[1] CC */ #define PN533_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ +/* + * Max extended frame payload len, excluding TFI and CC + * which are already in PN533_FRAME_HEADER_LEN. + */ +#define PN533_FRAME_MAX_PAYLOAD_LEN 263 + #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ PN533_FRAME_TAIL_LEN) #define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) @@ -807,6 +813,31 @@ unlock: return rc; } +static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct sk_buff *resp; + int rc; + int resp_len = PN533_FRAME_HEADER_LEN + + PN533_FRAME_MAX_PAYLOAD_LEN + + PN533_FRAME_TAIL_LEN; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + resp = nfc_alloc_recv_skb(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + rc = __pn533_send_async(dev, cmd_code, req, resp, resp_len, complete_cb, + complete_cb_context); + if (rc) + dev_kfree_skb(resp); + + return rc; +} + static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, struct sk_buff *req, pn533_send_async_complete_t complete_cb, -- cgit v0.10.2 From 94c5c1561dde894766b1a9135e47b056fdbe13a4 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:36 +0100 Subject: NFC: pn533: Add a new pn533_send_sync iface It is intended to replace pn533_send_cmd_frame_sync() iface which requires from the caller to create complete frame. The new function constructs a complete frame itself and sends it out in sync manner. This way frame logic is hidden from the caller. pn533_send_cmd_sync() returns ERR_PTR in case of an error or a pointer to valid response sk_buff otherwise. The pointer must be freed by the caller when it's been consumed. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 0e9bf9d..94c88bb 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -945,6 +945,7 @@ unlock: struct pn533_sync_cmd_response { int rc; + struct sk_buff *resp; struct completion done; }; @@ -965,6 +966,58 @@ static int pn533_sync_cmd_complete(struct pn533 *dev, void *_arg, return 0; } +static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, + struct sk_buff *resp) +{ + struct pn533_sync_cmd_response *arg = _arg; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + arg->resp = resp; + complete(&arg->done); + + return 0; +} + +/* pn533_send_cmd_sync + * + * Please note the req parameter is freed inside the function to + * limit a number of return value interpretations by the caller. + * + * 1. negative in case of error during TX path -> req should be freed + * + * 2. negative in case of error during RX path -> req should not be freed + * as it's been already freed at the begining of RX path by + * async_complete_cb. + * + * 3. valid pointer in case of succesfult RX path + * + * A caller has to check a return value with IS_ERR macro. If the test pass, + * the returned pointer is valid. + * + * */ +static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req) +{ + int rc; + struct pn533_sync_cmd_response arg; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + init_completion(&arg.done); + + rc = pn533_send_cmd_async(dev, cmd_code, req, + pn533_send_sync_complete, &arg); + if (rc) { + dev_kfree_skb(req); + return ERR_PTR(rc); + } + + wait_for_completion(&arg.done); + + return arg.resp; +} + static int pn533_send_cmd_frame_sync(struct pn533 *dev, struct pn533_frame *out_frame, struct pn533_frame *in_frame, @@ -2432,7 +2485,7 @@ static int pn533_fw_reset(struct pn533 *dev) rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN); - return rc; + return 0; } static struct nfc_ops pn533_nfc_ops = { -- cgit v0.10.2 From d22b2db69035ae3b8f71a58dfe0bd10ae1ee58d5 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:37 +0100 Subject: NFC: pn533: Add pn533_alloc_skb for req allocation Allocate sk_buff for the request. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 94c88bb..c34acd0 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1062,6 +1062,20 @@ static void pn533_send_complete(struct urb *urb) } } +static struct sk_buff *pn533_alloc_skb(unsigned int size) +{ + struct sk_buff *skb; + + skb = alloc_skb(PN533_FRAME_HEADER_LEN + + size + + PN533_FRAME_TAIL_LEN, GFP_KERNEL); + + if (skb) + skb_reserve(skb, PN533_FRAME_HEADER_LEN); + + return skb; +} + struct pn533_target_type_a { __be16 sens_res; u8 sel_res; @@ -2390,15 +2404,11 @@ static void pn533_wq_mi_recv(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); /* This is a zero payload size skb */ - skb_cmd = alloc_skb(PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_FRAME_TAIL_LEN, - GFP_KERNEL); + skb_cmd = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); if (skb_cmd == NULL) goto error_cmd; - skb_reserve(skb_cmd, - PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); + skb_reserve(skb_cmd, PN533_CMD_DATAEXCH_HEAD_LEN); rc = pn533_build_tx_frame(dev, skb_cmd, true); if (rc) -- cgit v0.10.2 From cb950d9304b2965bef07e26d6c0eb34a0b1f75fe Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:38 +0100 Subject: NFC: pn533: Remove pn533_send_cmd_frame_sync Remove obsolate pn533_send_cmd_frame_sync() and use previously added new iface for sync send. The new interface require the use of individual skb for each cmd which removes some memcpy calls and hides frame logic. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index c34acd0..e5615f5 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -286,11 +286,6 @@ const struct pn533_poll_modulations poll_mod[] = { /* PN533_CMD_IN_ATR */ -struct pn533_cmd_activate_param { - u8 tg; - u8 next; -} __packed; - struct pn533_cmd_activate_response { u8 status; u8 nfcid3t[10]; @@ -944,28 +939,10 @@ unlock: } struct pn533_sync_cmd_response { - int rc; struct sk_buff *resp; struct completion done; }; -static int pn533_sync_cmd_complete(struct pn533 *dev, void *_arg, - u8 *params, int params_len) -{ - struct pn533_sync_cmd_response *arg = _arg; - - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - - arg->rc = 0; - - if (params_len < 0) /* error */ - arg->rc = params_len; - - complete(&arg->done); - - return 0; -} - static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, struct sk_buff *resp) { @@ -1018,28 +995,6 @@ static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, return arg.resp; } -static int pn533_send_cmd_frame_sync(struct pn533 *dev, - struct pn533_frame *out_frame, - struct pn533_frame *in_frame, - int in_frame_len) -{ - int rc; - struct pn533_sync_cmd_response arg; - - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - - init_completion(&arg.done); - - rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, - pn533_sync_cmd_complete, &arg); - if (rc) - return rc; - - wait_for_completion(&arg.done); - - return arg.rc; -} - static void pn533_send_complete(struct urb *urb) { struct pn533 *dev = urb->context; @@ -1801,38 +1756,37 @@ static void pn533_stop_poll(struct nfc_dev *nfc_dev) static int pn533_activate_target_nfcdep(struct pn533 *dev) { - struct pn533_cmd_activate_param param; - struct pn533_cmd_activate_response *resp; + struct pn533_cmd_activate_response *rsp; u16 gt_len; int rc; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + struct sk_buff *skb; + struct sk_buff *resp; - pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_ATR); + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - param.tg = 1; - param.next = 0; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), ¶m, - sizeof(struct pn533_cmd_activate_param)); - dev->out_frame->datalen += sizeof(struct pn533_cmd_activate_param); + skb = pn533_alloc_skb(sizeof(u8) * 2); /*TG + Next*/ + if (!skb) + return -ENOMEM; - pn533_tx_frame_finish(dev->out_frame); + *skb_put(skb, sizeof(u8)) = 1; /* TG */ + *skb_put(skb, sizeof(u8)) = 0; /* Next */ - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); - if (rc) - return rc; + resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_ATR, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); - resp = (struct pn533_cmd_activate_response *) - PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame); - rc = resp->status & PN533_CMD_RET_MASK; + rsp = (struct pn533_cmd_activate_response *) resp->data; + rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) + dev_kfree_skb(resp); return -EIO; /* ATR_RES general bytes are located at offset 16 */ - gt_len = PN533_FRAME_CMD_PARAMS_LEN(dev->in_frame) - 16; - rc = nfc_set_remote_general_bytes(dev->nfc_dev, resp->gt, gt_len); + gt_len = resp->len - 16; + rc = nfc_set_remote_general_bytes(dev->nfc_dev, rsp->gt, gt_len); + dev_kfree_skb(resp); return rc; } @@ -1889,8 +1843,10 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, struct nfc_target *target) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - u8 tg; - u8 status; + + struct sk_buff *skb; + struct sk_buff *resp; + int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); @@ -1901,31 +1857,24 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, } dev->tgt_active_prot = 0; - skb_queue_purge(&dev->resp_q); - pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_RELEASE); - - tg = 1; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), &tg, sizeof(u8)); - dev->out_frame->datalen += sizeof(u8); + skb = pn533_alloc_skb(sizeof(u8)); + if (!skb) + return; - pn533_tx_frame_finish(dev->out_frame); + *skb_put(skb, 1) = 1; /* TG*/ - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); - if (rc) { - nfc_dev_err(&dev->interface->dev, "Error when sending release" - " command to the controller"); + resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_RELEASE, skb); + if (IS_ERR(resp)) return; - } - status = PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame)[0]; - rc = status & PN533_CMD_RET_MASK; + rc = resp->data[0] & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) nfc_dev_err(&dev->interface->dev, "Error 0x%x when releasing" " the target", rc); + dev_kfree_skb(resp); return; } @@ -2457,43 +2406,71 @@ error_cmd: static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, u8 cfgdata_len) { - int rc; - u8 *params; + struct sk_buff *skb; + struct sk_buff *resp; + + int skb_len; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - pn533_tx_frame_init(dev->out_frame, PN533_CMD_RF_CONFIGURATION); + skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */ - params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame); - params[0] = cfgitem; - memcpy(¶ms[1], cfgdata, cfgdata_len); - dev->out_frame->datalen += (1 + cfgdata_len); + skb = pn533_alloc_skb(skb_len); + if (!skb) + return -ENOMEM; - pn533_tx_frame_finish(dev->out_frame); + *skb_put(skb, sizeof(cfgitem)) = cfgitem; + memcpy(skb_put(skb, cfgdata_len), cfgdata, cfgdata_len); - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); + resp = pn533_send_cmd_sync(dev, PN533_CMD_RF_CONFIGURATION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); - return rc; + dev_kfree_skb(resp); + return 0; +} + +static int pn533_get_firmware_version(struct pn533 *dev, + struct pn533_fw_version *fv) +{ + struct sk_buff *skb; + struct sk_buff *resp; + + skb = pn533_alloc_skb(0); + if (!skb) + return -ENOMEM; + + resp = pn533_send_cmd_sync(dev, PN533_CMD_GET_FIRMWARE_VERSION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + fv->ic = resp->data[0]; + fv->ver = resp->data[1]; + fv->rev = resp->data[2]; + fv->support = resp->data[3]; + + dev_kfree_skb(resp); + return 0; } static int pn533_fw_reset(struct pn533 *dev) { - int rc; - u8 *params; + struct sk_buff *skb; + struct sk_buff *resp; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - pn533_tx_frame_init(dev->out_frame, 0x18); + skb = pn533_alloc_skb(sizeof(u8)); + if (!skb) + return -ENOMEM; - params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame); - params[0] = 0x1; - dev->out_frame->datalen += 1; + *skb_put(skb, sizeof(u8)) = 0x1; - pn533_tx_frame_finish(dev->out_frame); + resp = pn533_send_cmd_sync(dev, 0x18, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); + dev_kfree_skb(resp); return 0; } @@ -2592,7 +2569,7 @@ static int pn533_setup(struct pn533 *dev) static int pn533_probe(struct usb_interface *interface, const struct usb_device_id *id) { - struct pn533_fw_version *fw_ver; + struct pn533_fw_version fw_ver; struct pn533 *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; @@ -2664,18 +2641,14 @@ static int pn533_probe(struct usb_interface *interface, usb_set_intfdata(interface, dev); - pn533_tx_frame_init(dev->out_frame, PN533_CMD_GET_FIRMWARE_VERSION); - pn533_tx_frame_finish(dev->out_frame); - - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); - if (rc) + memset(&fw_ver, 0, sizeof(fw_ver)); + rc = pn533_get_firmware_version(dev, &fw_ver); + if (rc < 0) goto destroy_wq; - fw_ver = (struct pn533_fw_version *) - PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame); - nfc_dev_info(&dev->interface->dev, "NXP PN533 firmware ver %d.%d now" - " attached", fw_ver->ver, fw_ver->rev); + nfc_dev_info(&dev->interface->dev, + "NXP PN533 firmware ver %d.%d now attached", + fw_ver.ver, fw_ver.rev); dev->device_type = id->driver_info; switch (dev->device_type) { -- cgit v0.10.2 From 2593c2c6ec236c6aedbb8182d103185ab6580285 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 7 Dec 2012 15:55:19 +0100 Subject: NFC: llcp: Remove the tx backlog queue Not only it was improperly use to queue backlogged RX skbuffs, but it was also not processed at all. If the socket receive queue is full we simply drop the incoming packets. Signed-off-by: Samuel Ortiz diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 6c59714..003c82f 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -54,7 +54,6 @@ static void nfc_llcp_socket_purge(struct nfc_llcp_sock *sock) skb_queue_purge(&sock->tx_queue); skb_queue_purge(&sock->tx_pending_queue); - skb_queue_purge(&sock->tx_backlog_queue); if (local == NULL) return; @@ -785,7 +784,7 @@ static void nfc_llcp_recv_ui(struct nfc_llcp_local *local, skb_pull(skb, LLCP_HEADER_SIZE); if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { pr_err("receive queue is full\n"); - skb_queue_head(&llcp_sock->tx_backlog_queue, skb); + kfree_skb(skb); } nfc_llcp_sock_put(llcp_sock); @@ -980,7 +979,7 @@ static void nfc_llcp_recv_hdlc(struct nfc_llcp_local *local, skb_pull(skb, LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE); if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { pr_err("receive queue is full\n"); - skb_queue_head(&llcp_sock->tx_backlog_queue, skb); + kfree_skb(skb); } } diff --git a/net/nfc/llcp/llcp.h b/net/nfc/llcp/llcp.h index 0d62366..0eae5c5 100644 --- a/net/nfc/llcp/llcp.h +++ b/net/nfc/llcp/llcp.h @@ -121,7 +121,6 @@ struct nfc_llcp_sock { struct sk_buff_head tx_queue; struct sk_buff_head tx_pending_queue; - struct sk_buff_head tx_backlog_queue; struct list_head accept_queue; struct sock *parent; diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index ba19007..12ec487 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -808,7 +808,6 @@ struct sock *nfc_llcp_sock_alloc(struct socket *sock, int type, gfp_t gfp) llcp_sock->reserved_ssap = LLCP_SAP_MAX; skb_queue_head_init(&llcp_sock->tx_queue); skb_queue_head_init(&llcp_sock->tx_pending_queue); - skb_queue_head_init(&llcp_sock->tx_backlog_queue); INIT_LIST_HEAD(&llcp_sock->accept_queue); if (sock != NULL) @@ -823,7 +822,6 @@ void nfc_llcp_sock_free(struct nfc_llcp_sock *sock) skb_queue_purge(&sock->tx_queue); skb_queue_purge(&sock->tx_pending_queue); - skb_queue_purge(&sock->tx_backlog_queue); list_del_init(&sock->accept_queue); -- cgit v0.10.2 From 1727cf937401945a590ebf25c7fa65a4853fe9bb Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 7 Dec 2012 16:37:30 +0100 Subject: NFC: llcp: Fix Rx memory leak The reference count bump on the llcp Rx path is leading to a memory leak whenever we're not receiving an I frame. We fix that by removing the refcount bump (drivers must not free their received skb) and using it only in the I frame path, when the frame is actually queued. In that case, the skb will only be freed when someone fetches it from userspace. in all other cases, LLCP received frames will be freed when leaving the Rx work queue. Reported-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 003c82f..85bc75c 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -782,8 +782,14 @@ static void nfc_llcp_recv_ui(struct nfc_llcp_local *local, /* There is no sequence with UI frames */ skb_pull(skb, LLCP_HEADER_SIZE); - if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { - pr_err("receive queue is full\n"); + if (!sock_queue_rcv_skb(&llcp_sock->sk, skb)) { + /* + * UI frames will be freed from the socket layer, so we + * need to keep them alive until someone receives them. + */ + skb_get(skb); + } else { + pr_err("Receive queue is full\n"); kfree_skb(skb); } @@ -977,8 +983,14 @@ static void nfc_llcp_recv_hdlc(struct nfc_llcp_local *local, pr_err("Received out of sequence I PDU\n"); skb_pull(skb, LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE); - if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { - pr_err("receive queue is full\n"); + if (!sock_queue_rcv_skb(&llcp_sock->sk, skb)) { + /* + * I frames will be freed from the socket layer, so we + * need to keep them alive until someone receives them. + */ + skb_get(skb); + } else { + pr_err("Receive queue is full\n"); kfree_skb(skb); } } @@ -1299,6 +1311,13 @@ static void nfc_llcp_rx_work(struct work_struct *work) local->rx_pending = NULL; } +static void __nfc_llcp_recv(struct nfc_llcp_local *local, struct sk_buff *skb) +{ + local->rx_pending = skb; + del_timer(&local->link_timer); + schedule_work(&local->rx_work); +} + void nfc_llcp_recv(void *data, struct sk_buff *skb, int err) { struct nfc_llcp_local *local = (struct nfc_llcp_local *) data; @@ -1309,9 +1328,7 @@ void nfc_llcp_recv(void *data, struct sk_buff *skb, int err) return; } - local->rx_pending = skb_get(skb); - del_timer(&local->link_timer); - schedule_work(&local->rx_work); + __nfc_llcp_recv(local, skb); } int nfc_llcp_data_received(struct nfc_dev *dev, struct sk_buff *skb) @@ -1322,9 +1339,7 @@ int nfc_llcp_data_received(struct nfc_dev *dev, struct sk_buff *skb) if (local == NULL) return -ENODEV; - local->rx_pending = skb_get(skb); - del_timer(&local->link_timer); - schedule_work(&local->rx_work); + __nfc_llcp_recv(local, skb); return 0; } -- cgit v0.10.2 From e487882345a80a17b534182ab1f259f2321e4fed Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:44 +0100 Subject: NFC: pn533: Del frame logic from TgGet/SetData cmd Remove frame logic from TgSetData and TgGetData commands using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index e5615f5..9912824 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1450,65 +1450,46 @@ static int pn533_init_target_frame(struct pn533_frame *frame, #define PN533_CMD_DATAEXCH_HEAD_LEN 1 #define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { - struct sk_buff *skb_resp = arg; - struct pn533_frame *in_frame = (struct pn533_frame *) skb_resp->data; + u8 status; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when starting as a target", - params_len); + if (IS_ERR(resp)) + return PTR_ERR(resp); - return params_len; - } + status = resp->data[0]; + skb_pull(resp, sizeof(status)); - if (params_len > 0 && params[0] != 0) { + if (status != 0) { nfc_tm_deactivated(dev->nfc_dev); - dev->tgt_mode = 0; - - kfree_skb(skb_resp); + dev_kfree_skb(resp); return 0; } - skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); - skb_pull(skb_resp, - PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); - - return nfc_tm_data_received(dev->nfc_dev, skb_resp); + return nfc_tm_data_received(dev->nfc_dev, resp); } static void pn533_wq_tg_get_data(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, tg_work); - struct pn533_frame *in_frame; - struct sk_buff *skb_resp; - size_t skb_resp_len; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + struct sk_buff *skb; + int rc; - skb_resp_len = PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_LEN; + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); - if (!skb_resp) + skb = pn533_alloc_skb(0); + if (!skb) return; - in_frame = (struct pn533_frame *)skb_resp->data; - - pn533_tx_frame_init(dev->out_frame, PN533_CMD_TG_GET_DATA); - pn533_tx_frame_finish(dev->out_frame); + rc = pn533_send_data_async(dev, PN533_CMD_TG_GET_DATA, skb, + pn533_tm_get_data_complete, NULL); - pn533_send_cmd_frame_async(dev, dev->out_frame, in_frame, - skb_resp_len, - pn533_tm_get_data_complete, - skb_resp); + if (rc < 0) + dev_kfree_skb(skb); return; } @@ -2280,23 +2261,20 @@ error: } static int pn533_tm_send_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { - struct sk_buff *skb_out = arg; + u8 status; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - dev_kfree_skb(skb_out); + if (IS_ERR(resp)) + return PTR_ERR(resp); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when sending data", - params_len); + status = resp->data[0]; - return params_len; - } + dev_kfree_skb(resp); - if (params_len > 0 && params[0] != 0) { + if (status != 0) { nfc_tm_deactivated(dev->nfc_dev); dev->tgt_mode = 0; @@ -2312,30 +2290,21 @@ static int pn533_tm_send_complete(struct pn533 *dev, void *arg, static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - struct pn533_frame *out_frame; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - rc = pn533_build_tx_frame(dev, skb, false); - if (rc) - goto error; - - out_frame = (struct pn533_frame *) skb->data; - - rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_tm_send_complete, skb); - if (rc) { + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { nfc_dev_err(&dev->interface->dev, - "Error %d when trying to send data", rc); - goto error; + "Data length greater than the max allowed: %d", + PN533_CMD_DATAEXCH_DATA_MAXLEN); + return -ENOSYS; } - return 0; - -error: - kfree_skb(skb); + rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_DATA, skb, + pn533_tm_send_complete, NULL); + if (rc < 0) + dev_kfree_skb(skb); return rc; } -- cgit v0.10.2 From 13003649b1ebb4ea51341a9405a2ec5b10cf4f7e Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:45 +0100 Subject: NFC: pn533: Del frame logic from InJumForDep cmd Remove frame logic from InJmumpForDEP command using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 9912824..aa7803f 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -298,14 +298,6 @@ struct pn533_cmd_activate_response { u8 gt[]; } __packed; -/* PN533_CMD_IN_JUMP_FOR_DEP */ -struct pn533_cmd_jump_dep { - u8 active; - u8 baud; - u8 next; - u8 data[]; -} __packed; - struct pn533_cmd_jump_dep_response { u8 status; u8 tg; @@ -1861,53 +1853,46 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { - struct pn533_cmd_jump_dep_response *resp; - struct nfc_target nfc_target; + struct pn533_cmd_jump_dep_response *rsp; u8 target_gt_len; int rc; - struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg; - u8 active = cmd->active; + u8 active = *(u8 *)arg; kfree(arg); - if (params_len == -ENOENT) { - nfc_dev_dbg(&dev->interface->dev, ""); - return 0; - } - - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when bringing DEP link up", - params_len); - return 0; - } + if (IS_ERR(resp)) + return PTR_ERR(resp); if (dev->tgt_available_prots && !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) { nfc_dev_err(&dev->interface->dev, "The target does not support DEP"); - return -EINVAL; + rc = -EINVAL; + goto error; } - resp = (struct pn533_cmd_jump_dep_response *) params; - rc = resp->status & PN533_CMD_RET_MASK; + rsp = (struct pn533_cmd_jump_dep_response *)resp->data; + + rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, "Bringing DEP link up failed %d", rc); - return 0; + goto error; } if (!dev->tgt_available_prots) { + struct nfc_target nfc_target; + nfc_dev_dbg(&dev->interface->dev, "Creating new target"); nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK; nfc_target.nfcid1_len = 10; - memcpy(nfc_target.nfcid1, resp->nfcid3t, nfc_target.nfcid1_len); + memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len); rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1); if (rc) - return 0; + goto error; dev->tgt_available_prots = 0; } @@ -1915,15 +1900,17 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, dev->tgt_active_prot = NFC_PROTO_NFC_DEP; /* ATR_RES general bytes are located at offset 17 */ - target_gt_len = PN533_FRAME_CMD_PARAMS_LEN(dev->in_frame) - 17; + target_gt_len = resp->len - 17; rc = nfc_set_remote_general_bytes(dev->nfc_dev, - resp->gt, target_gt_len); + rsp->gt, target_gt_len); if (rc == 0) rc = nfc_dep_link_is_up(dev->nfc_dev, - dev->nfc_dev->targets[0].idx, - !active, NFC_RF_INITIATOR); + dev->nfc_dev->targets[0].idx, + !active, NFC_RF_INITIATOR); - return 0; +error: + dev_kfree_skb(resp); + return rc; } static int pn533_mod_to_baud(struct pn533 *dev) @@ -1945,10 +1932,11 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, u8 comm_mode, u8* gb, size_t gb_len) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - struct pn533_cmd_jump_dep *cmd; - u8 cmd_len, *data_ptr; + struct sk_buff *skb; + int rc, baud, skb_len; + u8 *next, *arg; + u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3}; - int rc, baud; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); @@ -1971,43 +1959,48 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, return baud; } - cmd_len = sizeof(struct pn533_cmd_jump_dep) + gb_len; + skb_len = 3 + gb_len; /* ActPass + BR + Next */ if (comm_mode == NFC_COMM_PASSIVE) - cmd_len += PASSIVE_DATA_LEN; + skb_len += PASSIVE_DATA_LEN; - cmd = kzalloc(cmd_len, GFP_KERNEL); - if (cmd == NULL) + skb = pn533_alloc_skb(skb_len); + if (!skb) return -ENOMEM; - pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_JUMP_FOR_DEP); + *skb_put(skb, 1) = !comm_mode; /* ActPass */ + *skb_put(skb, 1) = baud; /* Baud rate */ + + next = skb_put(skb, 1); /* Next */ + *next = 0; - cmd->active = !comm_mode; - cmd->next = 0; - cmd->baud = baud; - data_ptr = cmd->data; - if (comm_mode == NFC_COMM_PASSIVE && cmd->baud > 0) { - memcpy(data_ptr, passive_data, PASSIVE_DATA_LEN); - cmd->next |= 1; - data_ptr += PASSIVE_DATA_LEN; + if (comm_mode == NFC_COMM_PASSIVE && baud > 0) { + memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, + PASSIVE_DATA_LEN); + *next |= 1; } if (gb != NULL && gb_len > 0) { - cmd->next |= 4; /* We have some Gi */ - memcpy(data_ptr, gb, gb_len); + memcpy(skb_put(skb, gb_len), gb, gb_len); + *next |= 4; /* We have some Gi */ } else { - cmd->next = 0; + *next = 0; } - memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), cmd, cmd_len); - dev->out_frame->datalen += cmd_len; + arg = kmalloc(sizeof(*arg), GFP_KERNEL); + if (!arg) { + dev_kfree_skb(skb); + return -ENOMEM; + } - pn533_tx_frame_finish(dev->out_frame); + *arg = !comm_mode; - rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_in_dep_link_up_complete, cmd); - if (rc < 0) - kfree(cmd); + rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb, + pn533_in_dep_link_up_complete, arg); + + if (rc < 0) { + dev_kfree_skb(skb); + kfree(arg); + } return rc; } -- cgit v0.10.2 From b1e666f503b5479efe9adf79fb46f09fe4f04af5 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:46 +0100 Subject: NFC: pn533: Del frame logic from Data Exchange cmd Remove frame logic from transceive cb using new iface for async send. For pn533_wq_mi_recv() use pn533_send_cmd_direct_async which sends the cmd directly to the hardware, skipping cmd queue. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index aa7803f..91e1594 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -360,6 +360,7 @@ struct pn533 { pn533_cmd_complete_t cmd_complete; void *cmd_complete_arg; + void *cmd_complete_mi_arg; struct mutex cmd_lock; u8 cmd; @@ -848,6 +849,57 @@ static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, return rc; } +/* + * pn533_send_cmd_direct_async + * + * The function sends a piority cmd directly to the chip omiting the cmd + * queue. It's intended to be used by chaining mechanism of received responses + * where the host has to request every single chunk of data before scheduling + * next cmd from the queue. + */ +static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct pn533_send_async_complete_arg *arg; + struct sk_buff *resp; + int rc; + int resp_len = PN533_FRAME_HEADER_LEN + + PN533_FRAME_MAX_PAYLOAD_LEN + + PN533_FRAME_TAIL_LEN; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + resp = alloc_skb(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + arg = kzalloc(sizeof(arg), GFP_KERNEL); + if (!arg) { + dev_kfree_skb(resp); + return -ENOMEM; + } + + arg->complete_cb = complete_cb; + arg->complete_cb_context = complete_cb_context; + arg->resp = resp; + arg->req = req; + + pn533_build_cmd_frame(cmd_code, req); + + rc = __pn533_send_cmd_frame_async(dev, (struct pn533_frame *)req->data, + (struct pn533_frame *)resp->data, + resp_len, pn533_send_async_complete, + arg); + if (rc < 0) { + dev_kfree_skb(resp); + kfree(arg); + } + + return rc; +} + static void pn533_wq_cmd(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, cmd_work); @@ -2024,69 +2076,7 @@ static int pn533_dep_link_down(struct nfc_dev *nfc_dev) return 0; } -static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, - bool target) -{ - int payload_len = skb->len; - struct pn533_frame *out_frame; - u8 tg; - - nfc_dev_dbg(&dev->interface->dev, "%s - Sending %d bytes", __func__, - payload_len); - - if (payload_len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { - /* TODO: Implement support to multi-part data exchange */ - nfc_dev_err(&dev->interface->dev, "Data length greater than the" - " max allowed: %d", - PN533_CMD_DATAEXCH_DATA_MAXLEN); - return -ENOSYS; - } - - skb_push(skb, PN533_FRAME_HEADER_LEN); - - if (target == true) { - switch (dev->device_type) { - case PN533_DEVICE_PASORI: - if (dev->tgt_active_prot == NFC_PROTO_FELICA) { - out_frame = (struct pn533_frame *) skb->data; - pn533_tx_frame_init(out_frame, - PN533_CMD_IN_COMM_THRU); - - break; - } - - default: - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN); - out_frame = (struct pn533_frame *) skb->data; - pn533_tx_frame_init(out_frame, - PN533_CMD_IN_DATA_EXCHANGE); - tg = 1; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame), - &tg, sizeof(u8)); - out_frame->datalen += sizeof(u8); - - break; - } - - } else { - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1); - out_frame = (struct pn533_frame *) skb->data; - pn533_tx_frame_init(out_frame, PN533_CMD_TG_SET_DATA); - } - - - /* The data is already in the out_frame, just update the datalen */ - out_frame->datalen += payload_len; - - pn533_tx_frame_finish(out_frame); - skb_put(skb, PN533_FRAME_TAIL_LEN); - - return 0; -} - struct pn533_data_exchange_arg { - struct sk_buff *skb_resp; - struct sk_buff *skb_out; data_exchange_cb_t cb; void *cb_context; }; @@ -2130,47 +2120,44 @@ out: } static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, - u8 *params, int params_len) + struct sk_buff *resp) { struct pn533_data_exchange_arg *arg = _arg; - struct sk_buff *skb = NULL, *skb_resp = arg->skb_resp; - struct pn533_frame *in_frame = (struct pn533_frame *) skb_resp->data; - int err = 0; - u8 status; - u8 cmd_ret; + struct sk_buff *skb; + int rc = 0; + u8 status, ret, mi; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - dev_kfree_skb(arg->skb_out); - - if (params_len < 0) { /* error */ - err = params_len; - goto error; + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + goto _error; } - status = params[0]; + status = resp->data[0]; + ret = status & PN533_CMD_RET_MASK; + mi = status & PN533_CMD_MI_MASK; + + skb_pull(resp, sizeof(status)); - cmd_ret = status & PN533_CMD_RET_MASK; - if (cmd_ret != PN533_CMD_RET_SUCCESS) { - nfc_dev_err(&dev->interface->dev, "PN533 reported error %d when" - " exchanging data", cmd_ret); - err = -EIO; + if (ret != PN533_CMD_RET_SUCCESS) { + nfc_dev_err(&dev->interface->dev, + "PN533 reported error %d when exchanging data", + ret); + rc = -EIO; goto error; } - skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); - skb_pull(skb_resp, PN533_FRAME_HEADER_LEN); - skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); - skb_queue_tail(&dev->resp_q, skb_resp); + skb_queue_tail(&dev->resp_q, resp); - if (status & PN533_CMD_MI_MASK) { + if (mi) { + dev->cmd_complete_mi_arg = arg; queue_work(dev->wq, &dev->mi_work); return -EINPROGRESS; } skb = pn533_build_response(dev); - if (skb == NULL) + if (!skb) goto error; arg->cb(arg->cb_context, skb, 0); @@ -2178,11 +2165,12 @@ static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, return 0; error: + dev_kfree_skb(resp); +_error: skb_queue_purge(&dev->resp_q); - dev_kfree_skb(skb_resp); - arg->cb(arg->cb_context, NULL, err); + arg->cb(arg->cb_context, NULL, rc); kfree(arg); - return 0; + return rc; } static int pn533_transceive(struct nfc_dev *nfc_dev, @@ -2190,14 +2178,20 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, data_exchange_cb_t cb, void *cb_context) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - struct pn533_frame *out_frame, *in_frame; - struct pn533_data_exchange_arg *arg; - struct sk_buff *skb_resp; - int skb_resp_len; + struct pn533_data_exchange_arg *arg = NULL; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { + /* TODO: Implement support to multi-part data exchange */ + nfc_dev_err(&dev->interface->dev, + "Data length greater than the max allowed: %d", + PN533_CMD_DATAEXCH_DATA_MAXLEN); + rc = -ENOSYS; + goto error; + } + if (!dev->tgt_active_prot) { nfc_dev_err(&dev->interface->dev, "Cannot exchange data if" " there is no active target"); @@ -2205,51 +2199,43 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, goto error; } - rc = pn533_build_tx_frame(dev, skb, true); - if (rc) - goto error; - - skb_resp_len = PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_LEN; - - skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); - if (!skb_resp) { - rc = -ENOMEM; - goto error; - } - - in_frame = (struct pn533_frame *) skb_resp->data; - out_frame = (struct pn533_frame *) skb->data; - - arg = kmalloc(sizeof(struct pn533_data_exchange_arg), GFP_KERNEL); + arg = kmalloc(sizeof(*arg), GFP_KERNEL); if (!arg) { rc = -ENOMEM; - goto free_skb_resp; + goto error; } - arg->skb_resp = skb_resp; - arg->skb_out = skb; arg->cb = cb; arg->cb_context = cb_context; - rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, - pn533_data_exchange_complete, arg); - if (rc) { - nfc_dev_err(&dev->interface->dev, "Error %d when trying to" - " perform data_exchange", rc); - goto free_arg; + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot == NFC_PROTO_FELICA) { + rc = pn533_send_data_async(dev, PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + arg); + + break; + } + default: + *skb_push(skb, sizeof(u8)) = 1; /*TG*/ + + rc = pn533_send_data_async(dev, PN533_CMD_IN_DATA_EXCHANGE, + skb, pn533_data_exchange_complete, + arg); + + break; } + if (rc < 0) /* rc from send_async */ + goto error; + return 0; -free_arg: - kfree(arg); -free_skb_resp: - kfree_skb(skb_resp); error: - kfree_skb(skb); + kfree(arg); + dev_kfree_skb(skb); return rc; } @@ -2305,63 +2291,50 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) static void pn533_wq_mi_recv(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, mi_work); - struct sk_buff *skb_cmd; - struct pn533_data_exchange_arg *arg = dev->cmd_complete_arg; - struct pn533_frame *out_frame, *in_frame; - struct sk_buff *skb_resp; - int skb_resp_len; + + struct sk_buff *skb; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - /* This is a zero payload size skb */ - skb_cmd = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); - if (skb_cmd == NULL) - goto error_cmd; + skb = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); + if (!skb) + goto error; - skb_reserve(skb_cmd, PN533_CMD_DATAEXCH_HEAD_LEN); + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot == NFC_PROTO_FELICA) { + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_mi_arg); - rc = pn533_build_tx_frame(dev, skb_cmd, true); - if (rc) - goto error_frame; + break; + } + default: + *skb_put(skb, sizeof(u8)) = 1; /*TG*/ - skb_resp_len = PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_LEN; + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_DATA_EXCHANGE, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_mi_arg); - skb_resp = alloc_skb(skb_resp_len, GFP_KERNEL); - if (!skb_resp) { - rc = -ENOMEM; - goto error_frame; + break; } - in_frame = (struct pn533_frame *) skb_resp->data; - out_frame = (struct pn533_frame *) skb_cmd->data; - - arg->skb_resp = skb_resp; - arg->skb_out = skb_cmd; - - rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, - skb_resp_len, - pn533_data_exchange_complete, - dev->cmd_complete_arg); - if (!rc) + if (rc == 0) /* success */ return; - nfc_dev_err(&dev->interface->dev, "Error %d when trying to" - " perform data_exchange", rc); - - kfree_skb(skb_resp); + nfc_dev_err(&dev->interface->dev, + "Error %d when trying to perform data_exchange", rc); -error_frame: - kfree_skb(skb_cmd); + dev_kfree_skb(skb); + kfree(dev->cmd_complete_arg); -error_cmd: +error: pn533_send_ack(dev, GFP_KERNEL); - - kfree(arg); - queue_work(dev->wq, &dev->cmd_work); } -- cgit v0.10.2 From 99e591be3d95e55412585729624b05862bb5463c Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:47 +0100 Subject: NFC: pn533: Dump tx and rx data in debug mode Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 91e1594..b445f03 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -542,6 +542,9 @@ static void pn533_recv_response(struct urb *urb) in_frame = dev->in_urb->transfer_buffer; + print_hex_dump(KERN_DEBUG, "PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, + in_frame, PN533_FRAME_SIZE(in_frame), false); + if (!pn533_rx_frame_is_valid(in_frame)) { nfc_dev_err(&dev->interface->dev, "Received an invalid frame"); dev->wq_in_error = -EIO; @@ -664,6 +667,9 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, dev->in_urb->transfer_buffer = in_frame; dev->in_urb->transfer_buffer_length = in_frame_len; + print_hex_dump(KERN_DEBUG, "PN533 TX: ", DUMP_PREFIX_NONE, 16, 1, + out_frame, PN533_FRAME_SIZE(out_frame), false); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); if (rc) return rc; -- cgit v0.10.2 From b5193e5da24fb278c68fc0493c0a1073a1b27ab9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:48 +0100 Subject: NFC: pn533: Remove frame logic from poll cmds Remove frame logic from start_pool cb using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index b445f03..1016e09 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -320,20 +320,6 @@ struct pn533_cmd_jump_dep_response { #define PN533_INIT_TARGET_RESP_ACTIVE 0x1 #define PN533_INIT_TARGET_RESP_DEP 0x4 -struct pn533_cmd_init_target { - u8 mode; - u8 mifare[6]; - u8 felica[18]; - u8 nfcid3[10]; - u8 gb_len; - u8 gb[]; -} __packed; - -struct pn533_cmd_init_target_response { - u8 mode; - u8 cmd[]; -} __packed; - struct pn533 { struct usb_device *udev; struct usb_interface *interface; @@ -1315,50 +1301,37 @@ static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data, return 0; } -struct pn533_poll_response { - u8 nbtg; - u8 tg; - u8 target_data[]; -} __packed; - -static int pn533_target_found(struct pn533 *dev, - struct pn533_poll_response *resp, int resp_len) +static int pn533_target_found(struct pn533 *dev, u8 tg, u8 *tgdata, + int tgdata_len) { - int target_data_len; struct nfc_target nfc_tgt; int rc; nfc_dev_dbg(&dev->interface->dev, "%s - modulation=%d", __func__, - dev->poll_mod_curr); + dev->poll_mod_curr); - if (resp->tg != 1) + if (tg != 1) return -EPROTO; memset(&nfc_tgt, 0, sizeof(struct nfc_target)); - target_data_len = resp_len - sizeof(struct pn533_poll_response); - switch (dev->poll_mod_curr) { case PN533_POLL_MOD_106KBPS_A: - rc = pn533_target_found_type_a(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_type_a(&nfc_tgt, tgdata, tgdata_len); break; case PN533_POLL_MOD_212KBPS_FELICA: case PN533_POLL_MOD_424KBPS_FELICA: - rc = pn533_target_found_felica(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_felica(&nfc_tgt, tgdata, tgdata_len); break; case PN533_POLL_MOD_106KBPS_JEWEL: - rc = pn533_target_found_jewel(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_jewel(&nfc_tgt, tgdata, tgdata_len); break; case PN533_POLL_MOD_847KBPS_B: - rc = pn533_target_found_type_b(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_type_b(&nfc_tgt, tgdata, tgdata_len); break; default: - nfc_dev_err(&dev->interface->dev, "Unknown current poll" - " modulation"); + nfc_dev_err(&dev->interface->dev, + "Unknown current poll modulation"); return -EPROTO; } @@ -1366,13 +1339,14 @@ static int pn533_target_found(struct pn533 *dev, return rc; if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) { - nfc_dev_dbg(&dev->interface->dev, "The target found does not" - " have the desired protocol"); + nfc_dev_dbg(&dev->interface->dev, + "The Tg found doesn't have the desired protocol"); return -EAGAIN; } - nfc_dev_dbg(&dev->interface->dev, "Target found - supported protocols: " - "0x%x", nfc_tgt.supported_protocols); + nfc_dev_dbg(&dev->interface->dev, + "Target found - supported protocols: 0x%x", + nfc_tgt.supported_protocols); dev->tgt_available_prots = nfc_tgt.supported_protocols; @@ -1424,16 +1398,20 @@ static void pn533_poll_create_mod_list(struct pn533 *dev, pn533_poll_add_mod(dev, PN533_LISTEN_MOD); } -static int pn533_start_poll_complete(struct pn533 *dev, u8 *params, int params_len) +static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp) { - struct pn533_poll_response *resp; - int rc; + u8 nbtg, tg, *tgdata; + int rc, tgdata_len; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = (struct pn533_poll_response *) params; - if (resp->nbtg) { - rc = pn533_target_found(dev, resp, params_len); + nbtg = resp->data[0]; + tg = resp->data[1]; + tgdata = &resp->data[2]; + tgdata_len = resp->len - 2; /* nbtg + tg */ + + if (nbtg) { + rc = pn533_target_found(dev, tg, tgdata, tgdata_len); /* We must stop the poll after a valid target found */ if (rc == 0) { @@ -1445,56 +1423,55 @@ static int pn533_start_poll_complete(struct pn533 *dev, u8 *params, int params_l return -EAGAIN; } -static int pn533_init_target_frame(struct pn533_frame *frame, - u8 *gb, size_t gb_len) +static struct sk_buff *pn533_alloc_poll_tg_frame(u8 *gbytes, size_t gbytes_len) { - struct pn533_cmd_init_target *cmd; - size_t cmd_len; + struct sk_buff *skb; + u8 *felica, *nfcid3, *gb; + u8 felica_params[18] = {0x1, 0xfe, /* DEP */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff}; /* System code */ + u8 mifare_params[6] = {0x1, 0x1, /* SENS_RES */ 0x0, 0x0, 0x0, 0x40}; /* SEL_RES for DEP */ - cmd_len = sizeof(struct pn533_cmd_init_target) + gb_len + 1; - cmd = kzalloc(cmd_len, GFP_KERNEL); - if (cmd == NULL) - return -ENOMEM; + unsigned int skb_len = 36 + /* mode (1), mifare (6), + felica (18), nfcid3 (10), gb_len (1) */ + gbytes_len + + 1; /* len Tk*/ - pn533_tx_frame_init(frame, PN533_CMD_TG_INIT_AS_TARGET); + skb = pn533_alloc_skb(skb_len); + if (!skb) + return NULL; /* DEP support only */ - cmd->mode |= PN533_INIT_TARGET_DEP; + *skb_put(skb, 1) |= PN533_INIT_TARGET_DEP; + + /* MIFARE params */ + memcpy(skb_put(skb, 6), mifare_params, 6); /* Felica params */ - memcpy(cmd->felica, felica_params, 18); - get_random_bytes(cmd->felica + 2, 6); + felica = skb_put(skb, 18); + memcpy(felica, felica_params, 18); + get_random_bytes(felica + 2, 6); /* NFCID3 */ - memset(cmd->nfcid3, 0, 10); - memcpy(cmd->nfcid3, cmd->felica, 8); - - /* MIFARE params */ - memcpy(cmd->mifare, mifare_params, 6); + nfcid3 = skb_put(skb, 10); + memset(nfcid3, 0, 10); + memcpy(nfcid3, felica, 8); /* General bytes */ - cmd->gb_len = gb_len; - memcpy(cmd->gb, gb, gb_len); - - /* Len Tk */ - cmd->gb[gb_len] = 0; - - memcpy(PN533_FRAME_CMD_PARAMS_PTR(frame), cmd, cmd_len); + *skb_put(skb, 1) = gbytes_len; - frame->datalen += cmd_len; + gb = skb_put(skb, gbytes_len); + memcpy(gb, gbytes, gbytes_len); - pn533_tx_frame_finish(frame); - - kfree(cmd); + /* Len Tk */ + *skb_put(skb, 1) = 0; - return 0; + return skb; } #define PN533_CMD_DATAEXCH_HEAD_LEN 1 @@ -1545,41 +1522,32 @@ static void pn533_wq_tg_get_data(struct work_struct *work) } #define ATR_REQ_GB_OFFSET 17 -static int pn533_init_target_complete(struct pn533 *dev, u8 *params, int params_len) +static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp) { - struct pn533_cmd_init_target_response *resp; - u8 frame, comm_mode = NFC_COMM_PASSIVE, *gb; + u8 mode, *cmd, comm_mode = NFC_COMM_PASSIVE, *gb; size_t gb_len; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when starting as a target", - params_len); - - return params_len; - } - - if (params_len < ATR_REQ_GB_OFFSET + 1) + if (resp->len < ATR_REQ_GB_OFFSET + 1) return -EINVAL; - resp = (struct pn533_cmd_init_target_response *) params; + mode = resp->data[0]; + cmd = &resp->data[1]; - nfc_dev_dbg(&dev->interface->dev, "Target mode 0x%x param len %d\n", - resp->mode, params_len); + nfc_dev_dbg(&dev->interface->dev, "Target mode 0x%x len %d\n", + mode, resp->len); - frame = resp->mode & PN533_INIT_TARGET_RESP_FRAME_MASK; - if (frame == PN533_INIT_TARGET_RESP_ACTIVE) + if ((mode & PN533_INIT_TARGET_RESP_FRAME_MASK) == + PN533_INIT_TARGET_RESP_ACTIVE) comm_mode = NFC_COMM_ACTIVE; - /* Again, only DEP */ - if ((resp->mode & PN533_INIT_TARGET_RESP_DEP) == 0) + if ((mode & PN533_INIT_TARGET_RESP_DEP) == 0) /* Only DEP supported */ return -EOPNOTSUPP; - gb = resp->cmd + ATR_REQ_GB_OFFSET; - gb_len = params_len - (ATR_REQ_GB_OFFSET + 1); + gb = cmd + ATR_REQ_GB_OFFSET; + gb_len = resp->len - (ATR_REQ_GB_OFFSET + 1); rc = nfc_tm_activated(dev->nfc_dev, NFC_PROTO_NFC_DEP_MASK, comm_mode, gb, gb_len); @@ -1590,7 +1558,6 @@ static int pn533_init_target_complete(struct pn533 *dev, u8 *params, int params_ } dev->tgt_mode = 1; - queue_work(dev->wq, &dev->tg_work); return 0; @@ -1613,89 +1580,104 @@ static void pn533_listen_mode_timer(unsigned long data) } static int pn533_poll_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { struct pn533_poll_modulations *cur_mod; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (params_len == -ENOENT) { - if (dev->poll_mod_count != 0) - return 0; - - nfc_dev_err(&dev->interface->dev, - "Polling operation has been stopped"); + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); - goto stop_poll; - } + nfc_dev_err(&dev->interface->dev, "%s Poll complete error %d", + __func__, rc); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when running poll", params_len); - - goto stop_poll; + if (rc == -ENOENT) { + if (dev->poll_mod_count != 0) + return rc; + else + goto stop_poll; + } else if (rc < 0) { + nfc_dev_err(&dev->interface->dev, + "Error %d when running poll", rc); + goto stop_poll; + } } cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; - if (cur_mod->len == 0) { + if (cur_mod->len == 0) { /* Target mode */ del_timer(&dev->listen_timer); - - return pn533_init_target_complete(dev, params, params_len); - } else { - rc = pn533_start_poll_complete(dev, params, params_len); - if (!rc) - return rc; + rc = pn533_init_target_complete(dev, resp); + goto done; } - pn533_poll_next_mod(dev); + /* Initiator mode */ + rc = pn533_start_poll_complete(dev, resp); + if (!rc) + goto done; + pn533_poll_next_mod(dev); queue_work(dev->wq, &dev->poll_work); - return 0; +done: + dev_kfree_skb(resp); + return rc; stop_poll: + nfc_dev_err(&dev->interface->dev, "Polling operation has been stopped"); + pn533_poll_reset_mod_list(dev); dev->poll_protocols = 0; - return 0; + return rc; } -static void pn533_build_poll_frame(struct pn533 *dev, - struct pn533_frame *frame, - struct pn533_poll_modulations *mod) +static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533_poll_modulations + *mod) { - nfc_dev_dbg(&dev->interface->dev, "mod len %d\n", mod->len); + struct sk_buff *skb; - if (mod->len == 0) { - /* Listen mode */ - pn533_init_target_frame(frame, dev->gb, dev->gb_len); - } else { - /* Polling mode */ - pn533_tx_frame_init(frame, PN533_CMD_IN_LIST_PASSIVE_TARGET); + skb = pn533_alloc_skb(mod->len); + if (!skb) + return NULL; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(frame), &mod->data, mod->len); - frame->datalen += mod->len; + memcpy(skb_put(skb, mod->len), &mod->data, mod->len); - pn533_tx_frame_finish(frame); - } + return skb; } static int pn533_send_poll_frame(struct pn533 *dev) { - struct pn533_poll_modulations *cur_mod; + struct pn533_poll_modulations *mod; + struct sk_buff *skb; int rc; + u8 cmd_code; - cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; + mod = dev->poll_mod_active[dev->poll_mod_curr]; - pn533_build_poll_frame(dev, dev->out_frame, cur_mod); + nfc_dev_dbg(&dev->interface->dev, "%s mod len %d\n", + __func__, mod->len); - rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_poll_complete, - NULL); - if (rc) + if (mod->len == 0) { /* Listen mode */ + cmd_code = PN533_CMD_TG_INIT_AS_TARGET; + skb = pn533_alloc_poll_tg_frame(dev->gb, dev->gb_len); + } else { /* Polling mode */ + cmd_code = PN533_CMD_IN_LIST_PASSIVE_TARGET; + skb = pn533_alloc_poll_in_frame(mod); + } + + if (!skb) { + nfc_dev_err(&dev->interface->dev, "Failed to allocate skb."); + return -ENOMEM; + } + + rc = pn533_send_cmd_async(dev, cmd_code, skb, pn533_poll_complete, + NULL); + if (rc < 0) { + dev_kfree_skb(skb); nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc); + } return rc; } -- cgit v0.10.2 From 6ca55372bf55885e02d17c58cd29ceef045ee699 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:49 +0100 Subject: NFC: pn533: Fix quoted strings split across lines Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 1016e09..4397061 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -515,13 +515,13 @@ static void pn533_recv_response(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" - " status: %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Urb shutting down with status: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; default: - nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:" - " %d", urb->status); + nfc_dev_err(&dev->interface->dev, + "Nonzero urb status received: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -538,8 +538,8 @@ static void pn533_recv_response(struct urb *urb) } if (!pn533_rx_frame_is_cmd_response(in_frame, dev->cmd)) { - nfc_dev_err(&dev->interface->dev, "The received frame is not " - "response to the last command"); + nfc_dev_err(&dev->interface->dev, + "It it not the response to the last command"); dev->wq_in_error = -EIO; goto sched_wq; } @@ -572,13 +572,13 @@ static void pn533_recv_ack(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" - " status: %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Urb shutting down with status: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; default: - nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:" - " %d", urb->status); + nfc_dev_err(&dev->interface->dev, + "Nonzero urb status received: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -595,8 +595,8 @@ static void pn533_recv_ack(struct urb *urb) rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC); if (rc) { - nfc_dev_err(&dev->interface->dev, "usb_submit_urb failed with" - " result %d", rc); + nfc_dev_err(&dev->interface->dev, + "usb_submit_urb failed with result %d", rc); dev->wq_in_error = rc; goto sched_wq; } @@ -1044,12 +1044,12 @@ static void pn533_send_complete(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" - " status: %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Urb shutting down with status: %d", urb->status); break; default: - nfc_dev_dbg(&dev->interface->dev, "Nonzero urb status received:" - " %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Nonzero urb status received: %d", urb->status); } } @@ -1753,8 +1753,8 @@ static void pn533_stop_poll(struct nfc_dev *nfc_dev) del_timer(&dev->listen_timer); if (!dev->poll_mod_count) { - nfc_dev_dbg(&dev->interface->dev, "Polling operation was not" - " running"); + nfc_dev_dbg(&dev->interface->dev, + "Polling operation was not running"); return; } @@ -1813,35 +1813,35 @@ static int pn533_activate_target(struct nfc_dev *nfc_dev, protocol); if (dev->poll_mod_count) { - nfc_dev_err(&dev->interface->dev, "Cannot activate while" - " polling"); + nfc_dev_err(&dev->interface->dev, + "Cannot activate while polling"); return -EBUSY; } if (dev->tgt_active_prot) { - nfc_dev_err(&dev->interface->dev, "There is already an active" - " target"); + nfc_dev_err(&dev->interface->dev, + "There is already an active target"); return -EBUSY; } if (!dev->tgt_available_prots) { - nfc_dev_err(&dev->interface->dev, "There is no available target" - " to activate"); + nfc_dev_err(&dev->interface->dev, + "There is no available target to activate"); return -EINVAL; } if (!(dev->tgt_available_prots & (1 << protocol))) { - nfc_dev_err(&dev->interface->dev, "The target does not support" - " the requested protocol %u", protocol); + nfc_dev_err(&dev->interface->dev, + "Target doesn't support requested proto %u", + protocol); return -EINVAL; } if (protocol == NFC_PROTO_NFC_DEP) { rc = pn533_activate_target_nfcdep(dev); if (rc) { - nfc_dev_err(&dev->interface->dev, "Error %d when" - " activating target with" - " NFC_DEP protocol", rc); + nfc_dev_err(&dev->interface->dev, + "Activating target with DEP failed %d", rc); return rc; } } @@ -1884,8 +1884,8 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, rc = resp->data[0] & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) - nfc_dev_err(&dev->interface->dev, "Error 0x%x when releasing" - " the target", rc); + nfc_dev_err(&dev->interface->dev, + "Error 0x%x when releasing the target", rc); dev_kfree_skb(resp); return; @@ -2181,8 +2181,8 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, } if (!dev->tgt_active_prot) { - nfc_dev_err(&dev->interface->dev, "Cannot exchange data if" - " there is no active target"); + nfc_dev_err(&dev->interface->dev, + "Can't exchange data if there is no active target"); rc = -EINVAL; goto error; } @@ -2522,8 +2522,8 @@ static int pn533_probe(struct usb_interface *interface, } if (!in_endpoint || !out_endpoint) { - nfc_dev_err(&interface->dev, "Could not find bulk-in or" - " bulk-out endpoint"); + nfc_dev_err(&interface->dev, + "Could not find bulk-in or bulk-out endpoint"); rc = -ENODEV; goto error; } -- cgit v0.10.2 From 37cf4fc6c98f230ca026763ae03cb88ff786eeb9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:50 +0100 Subject: NFC: pn533: Fix spacing issues Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 4397061..19fecdb 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1124,7 +1124,7 @@ static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_type_a *tgt_type_a; - tgt_type_a = (struct pn533_target_type_a *) tgt_data; + tgt_type_a = (struct pn533_target_type_a *)tgt_data; if (!pn533_target_type_a_is_valid(tgt_type_a, tgt_data_len)) return -EPROTO; @@ -1182,7 +1182,7 @@ static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_felica *tgt_felica; - tgt_felica = (struct pn533_target_felica *) tgt_data; + tgt_felica = (struct pn533_target_felica *)tgt_data; if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len)) return -EPROTO; @@ -1232,7 +1232,7 @@ static int pn533_target_found_jewel(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_jewel *tgt_jewel; - tgt_jewel = (struct pn533_target_jewel *) tgt_data; + tgt_jewel = (struct pn533_target_jewel *)tgt_data; if (!pn533_target_jewel_is_valid(tgt_jewel, tgt_data_len)) return -EPROTO; @@ -1291,7 +1291,7 @@ static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_type_b *tgt_type_b; - tgt_type_b = (struct pn533_target_type_b *) tgt_data; + tgt_type_b = (struct pn533_target_type_b *)tgt_data; if (!pn533_target_type_b_is_valid(tgt_type_b, tgt_data_len)) return -EPROTO; @@ -1368,7 +1368,7 @@ static void pn533_poll_reset_mod_list(struct pn533 *dev) static void pn533_poll_add_mod(struct pn533 *dev, u8 mod_index) { dev->poll_mod_active[dev->poll_mod_count] = - (struct pn533_poll_modulations *) &poll_mod[mod_index]; + (struct pn533_poll_modulations *)&poll_mod[mod_index]; dev->poll_mod_count++; } @@ -1565,7 +1565,7 @@ static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp) static void pn533_listen_mode_timer(unsigned long data) { - struct pn533 *dev = (struct pn533 *) data; + struct pn533 *dev = (struct pn533 *)data; nfc_dev_dbg(&dev->interface->dev, "Listen mode timeout"); @@ -1789,7 +1789,7 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) if (IS_ERR(resp)) return PTR_ERR(resp); - rsp = (struct pn533_cmd_activate_response *) resp->data; + rsp = (struct pn533_cmd_activate_response *)resp->data; rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) dev_kfree_skb(resp); @@ -1969,7 +1969,7 @@ static int pn533_mod_to_baud(struct pn533 *dev) #define PASSIVE_DATA_LEN 5 static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, - u8 comm_mode, u8* gb, size_t gb_len) + u8 comm_mode, u8 *gb, size_t gb_len) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); struct sk_buff *skb; -- cgit v0.10.2 From 5d467742bc53eff6233bd437c13dcefb449246f8 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:51 +0100 Subject: NFC: pn533: Fix open parenthesis alignment Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 19fecdb..02043dc 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -640,7 +640,7 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, int rc; nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", - PN533_FRAME_CMD(out_frame)); + PN533_FRAME_CMD(out_frame)); dev->cmd = PN533_FRAME_CMD(out_frame); dev->cmd_complete = cmd_complete; @@ -1107,9 +1107,9 @@ static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a, platconf = PN533_TYPE_A_SENS_RES_PLATCONF(type_a->sens_res); if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || - (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) + platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || + (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) return false; /* Requirements 4.8.2.1, 4.8.2.3, 4.8.2.5 and 4.8.2.7 from NFC Forum */ @@ -1187,9 +1187,8 @@ static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data, if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len)) return -EPROTO; - if (tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1 && - tgt_felica->nfcid2[1] == - PN533_FELICA_SENSF_NFCID2_DEP_B2) + if ((tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1) && + (tgt_felica->nfcid2[1] == PN533_FELICA_SENSF_NFCID2_DEP_B2)) nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK; else nfc_tgt->supported_protocols = NFC_PROTO_FELICA_MASK; @@ -1219,9 +1218,9 @@ static bool pn533_target_jewel_is_valid(struct pn533_target_jewel *jewel, platconf = PN533_TYPE_A_SENS_RES_PLATCONF(jewel->sens_res); if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || - (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) + platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || + (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) return false; return true; @@ -1810,7 +1809,7 @@ static int pn533_activate_target(struct nfc_dev *nfc_dev, int rc; nfc_dev_dbg(&dev->interface->dev, "%s - protocol=%u", __func__, - protocol); + protocol); if (dev->poll_mod_count) { nfc_dev_err(&dev->interface->dev, @@ -1908,7 +1907,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, if (dev->tgt_available_prots && !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) { nfc_dev_err(&dev->interface->dev, - "The target does not support DEP"); + "The target does not support DEP"); rc = -EINVAL; goto error; } @@ -1918,7 +1917,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, - "Bringing DEP link up failed %d", rc); + "Bringing DEP link up failed %d", rc); goto error; } @@ -1982,13 +1981,13 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, if (dev->poll_mod_count) { nfc_dev_err(&dev->interface->dev, - "Cannot bring the DEP link up while polling"); + "Cannot bring the DEP link up while polling"); return -EBUSY; } if (dev->tgt_active_prot) { nfc_dev_err(&dev->interface->dev, - "There is already an active target"); + "There is already an active target"); return -EBUSY; } @@ -2533,17 +2532,15 @@ static int pn533_probe(struct usb_interface *interface, dev->out_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->in_frame || !dev->out_frame || - !dev->in_urb || !dev->out_urb) + if (!dev->in_frame || !dev->out_frame || !dev->in_urb || !dev->out_urb) goto error; usb_fill_bulk_urb(dev->in_urb, dev->udev, - usb_rcvbulkpipe(dev->udev, in_endpoint), - NULL, 0, NULL, dev); + usb_rcvbulkpipe(dev->udev, in_endpoint), + NULL, 0, NULL, dev); usb_fill_bulk_urb(dev->out_urb, dev->udev, - usb_sndbulkpipe(dev->udev, out_endpoint), - NULL, 0, - pn533_send_complete, dev); + usb_sndbulkpipe(dev->udev, out_endpoint), + NULL, 0, pn533_send_complete, dev); INIT_WORK(&dev->cmd_work, pn533_wq_cmd); INIT_WORK(&dev->cmd_complete_work, pn533_wq_cmd_complete); -- cgit v0.10.2 From b08e860355ba6f67b769c9061f468f7a8856bad9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:52 +0100 Subject: NFC: pn533: Fix minor style issues Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 02043dc..2cb8ceb 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1376,13 +1376,13 @@ static void pn533_poll_create_mod_list(struct pn533 *dev, { pn533_poll_reset_mod_list(dev); - if (im_protocols & NFC_PROTO_MIFARE_MASK - || im_protocols & NFC_PROTO_ISO14443_MASK - || im_protocols & NFC_PROTO_NFC_DEP_MASK) + if ((im_protocols & NFC_PROTO_MIFARE_MASK) || + (im_protocols & NFC_PROTO_ISO14443_MASK) || + (im_protocols & NFC_PROTO_NFC_DEP_MASK)) pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_A); - if (im_protocols & NFC_PROTO_FELICA_MASK - || im_protocols & NFC_PROTO_NFC_DEP_MASK) { + if (im_protocols & NFC_PROTO_FELICA_MASK || + im_protocols & NFC_PROTO_NFC_DEP_MASK) { pn533_poll_add_mod(dev, PN533_POLL_MOD_212KBPS_FELICA); pn533_poll_add_mod(dev, PN533_POLL_MOD_424KBPS_FELICA); } -- cgit v0.10.2 From 89fb20256725e735601ea6439680956fa2ec4741 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:53 +0100 Subject: NFC: pn533: Remove unused pn533_send_cmd_frame_asy Remove obsolete send async api as it's no longer used. Remove global dev->in_frame as well, as each packet is kept is a seperate skb struct now, so that's not used anymore. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 2cb8ceb..d17ec6a 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -329,7 +329,6 @@ struct pn533 { struct pn533_frame *out_frame; struct urb *in_urb; - struct pn533_frame *in_frame; struct sk_buff_head resp_q; @@ -371,13 +370,9 @@ struct pn533 { struct pn533_cmd { struct list_head queue; - struct pn533_frame *out_frame; - struct pn533_frame *in_frame; - int in_frame_len; u8 cmd_code; struct sk_buff *req; struct sk_buff *resp; - pn533_cmd_complete_t cmd_complete; void *arg; }; @@ -911,69 +906,16 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - if (cmd->cmd_code != PN533_CMD_UNDEF) - __pn533_send_cmd_frame_async(dev, - (struct pn533_frame *)cmd->req->data, - (struct pn533_frame *)cmd->resp->data, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_send_async_complete, - cmd->arg); - else - __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, - cmd->in_frame_len, - cmd->cmd_complete, cmd->arg); + __pn533_send_cmd_frame_async(dev, + (struct pn533_frame *)cmd->req->data, + (struct pn533_frame *)cmd->resp->data, + PN533_NORMAL_FRAME_MAX_LEN, + pn533_send_async_complete, + cmd->arg); kfree(cmd); } -static int pn533_send_cmd_frame_async(struct pn533 *dev, - struct pn533_frame *out_frame, - struct pn533_frame *in_frame, - int in_frame_len, - pn533_cmd_complete_t cmd_complete, - void *arg) -{ - struct pn533_cmd *cmd; - int rc = 0; - - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - - mutex_lock(&dev->cmd_lock); - - if (!dev->cmd_pending) { - rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, - in_frame_len, cmd_complete, - arg); - if (!rc) - dev->cmd_pending = 1; - - goto unlock; - } - - nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); - - cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); - if (!cmd) { - rc = -ENOMEM; - goto unlock; - } - - INIT_LIST_HEAD(&cmd->queue); - cmd->out_frame = out_frame; - cmd->in_frame = in_frame; - cmd->in_frame_len = in_frame_len; - cmd->cmd_code = PN533_CMD_UNDEF; - cmd->cmd_complete = cmd_complete; - cmd->arg = arg; - - list_add_tail(&cmd->queue, &dev->cmd_queue); - -unlock: - mutex_unlock(&dev->cmd_lock); - - return rc; -} - struct pn533_sync_cmd_response { struct sk_buff *resp; struct completion done; @@ -2527,12 +2469,11 @@ static int pn533_probe(struct usb_interface *interface, goto error; } - dev->in_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); dev->out_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->in_frame || !dev->out_frame || !dev->in_urb || !dev->out_urb) + if (!dev->out_frame || !dev->in_urb || !dev->out_urb) goto error; usb_fill_bulk_urb(dev->in_urb, dev->udev, @@ -2616,7 +2557,6 @@ free_nfc_dev: destroy_wq: destroy_workqueue(dev->wq); error: - kfree(dev->in_frame); usb_free_urb(dev->in_urb); kfree(dev->out_frame); usb_free_urb(dev->out_urb); @@ -2649,7 +2589,6 @@ static void pn533_disconnect(struct usb_interface *interface) kfree(cmd); } - kfree(dev->in_frame); usb_free_urb(dev->in_urb); kfree(dev->out_frame); usb_free_urb(dev->out_urb); -- cgit v0.10.2 From f8f991710b580878c88cfe49d918cfb0c9e15236 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:54 +0100 Subject: NFC: pn533: Fix urb->status handling Fix text message to be more suitable for the error code and treat ESHUTDOWN as an error not debug msg. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index d17ec6a..898375d 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -505,18 +505,19 @@ static void pn533_recv_response(struct urb *urb) switch (urb->status) { case 0: - /* success */ - break; + break; /* success */ case -ECONNRESET: case -ENOENT: - case -ESHUTDOWN: nfc_dev_dbg(&dev->interface->dev, - "Urb shutting down with status: %d", urb->status); + "The urb has been canceled (status %d)", + urb->status); dev->wq_in_error = urb->status; goto sched_wq; + break; + case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, - "Nonzero urb status received: %d", urb->status); + "Urb failure (status %d)", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -562,18 +563,19 @@ static void pn533_recv_ack(struct urb *urb) switch (urb->status) { case 0: - /* success */ - break; + break; /* success */ case -ECONNRESET: case -ENOENT: - case -ESHUTDOWN: nfc_dev_dbg(&dev->interface->dev, - "Urb shutting down with status: %d", urb->status); + "The urb has been stopped (status %d)", + urb->status); dev->wq_in_error = urb->status; goto sched_wq; + break; + case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, - "Nonzero urb status received: %d", urb->status); + "Urb failure (status %d)", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -981,17 +983,17 @@ static void pn533_send_complete(struct urb *urb) switch (urb->status) { case 0: - /* success */ - break; + break; /* success */ case -ECONNRESET: case -ENOENT: - case -ESHUTDOWN: nfc_dev_dbg(&dev->interface->dev, - "Urb shutting down with status: %d", urb->status); + "The urb has been stopped (status %d)", + urb->status); break; + case -ESHUTDOWN: default: - nfc_dev_dbg(&dev->interface->dev, - "Nonzero urb status received: %d", urb->status); + nfc_dev_err(&dev->interface->dev, + "Urb failure (status %d)", urb->status); } } -- cgit v0.10.2 From fcfafc7690164d08dfd8133a860f25db8019ca2e Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:55 +0100 Subject: NFC: pn533: Cleanup debug messages Remove debug messages which do not include valueable informations in debug mode. Add some new ones for better tracking or reword when if necessary. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 898375d..5fb5b8f 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -524,6 +524,7 @@ static void pn533_recv_response(struct urb *urb) in_frame = dev->in_urb->transfer_buffer; + nfc_dev_dbg(&dev->interface->dev, "Received a frame."); print_hex_dump(KERN_DEBUG, "PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame, PN533_FRAME_SIZE(in_frame), false); @@ -540,7 +541,6 @@ static void pn533_recv_response(struct urb *urb) goto sched_wq; } - nfc_dev_dbg(&dev->interface->dev, "Received a valid frame"); dev->wq_in_error = 0; dev->wq_in_frame = in_frame; @@ -588,8 +588,6 @@ static void pn533_recv_ack(struct urb *urb) goto sched_wq; } - nfc_dev_dbg(&dev->interface->dev, "Received a valid ack"); - rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC); if (rc) { nfc_dev_err(&dev->interface->dev, @@ -636,9 +634,6 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, { int rc; - nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", - PN533_FRAME_CMD(out_frame)); - dev->cmd = PN533_FRAME_CMD(out_frame); dev->cmd_complete = cmd_complete; dev->cmd_complete_arg = arg; @@ -705,10 +700,6 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, dev_kfree_skb(req); if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when starting as a target", - params_len); - arg->complete_cb(dev, arg->complete_cb_context, ERR_PTR(params_len)); rc = params_len; @@ -737,7 +728,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, struct pn533_send_async_complete_arg *arg; int rc = 0; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", cmd_code); arg = kzalloc(sizeof(arg), GFP_KERNEL); if (!arg) @@ -765,7 +756,8 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, goto unlock; } - nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); + nfc_dev_dbg(&dev->interface->dev, "%s Queueing command 0x%x", __func__, + cmd_code); cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); if (!cmd) { @@ -801,8 +793,6 @@ static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, PN533_FRAME_MAX_PAYLOAD_LEN + PN533_FRAME_TAIL_LEN; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = nfc_alloc_recv_skb(resp_len, GFP_KERNEL); if (!resp) return -ENOMEM; @@ -823,8 +813,6 @@ static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, struct sk_buff *resp; int rc; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = alloc_skb(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); if (!resp) return -ENOMEM; @@ -858,8 +846,6 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, PN533_FRAME_MAX_PAYLOAD_LEN + PN533_FRAME_TAIL_LEN; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = alloc_skb(resp_len, GFP_KERNEL); if (!resp) return -ENOMEM; @@ -928,8 +914,6 @@ static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, { struct pn533_sync_cmd_response *arg = _arg; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - arg->resp = resp; complete(&arg->done); @@ -959,8 +943,6 @@ static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, int rc; struct pn533_sync_cmd_response arg; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - init_completion(&arg.done); rc = pn533_send_cmd_async(dev, cmd_code, req, @@ -979,8 +961,6 @@ static void pn533_send_complete(struct urb *urb) { struct pn533 *dev = urb->context; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - switch (urb->status) { case 0: break; /* success */ @@ -1992,6 +1972,8 @@ static int pn533_dep_link_down(struct nfc_dev *nfc_dev) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + pn533_poll_reset_mod_list(dev); if (dev->tgt_mode || dev->tgt_active_prot) { @@ -2017,7 +1999,7 @@ static struct sk_buff *pn533_build_response(struct pn533 *dev) struct sk_buff *skb, *tmp, *t; unsigned int skb_len = 0, tmp_len = 0; - nfc_dev_dbg(&dev->interface->dev, "%s\n", __func__); + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); if (skb_queue_empty(&dev->resp_q)) return NULL; -- cgit v0.10.2 From 5b5a4437ae078cbe35020e74eb0b66ebedc2a2c0 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:56 +0100 Subject: NFC: pn533: Don't use out_frame in pn533_send_ack dev->out_frame buffer is much bigger for ACK frame needs. Use local buffer instead. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 5fb5b8f..5bc0c7c 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -94,7 +94,8 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ PN533_FRAME_TAIL_LEN) -#define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) +#define PN533_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), + Postamble (1) */ #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) #define PN533_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) @@ -402,26 +403,6 @@ static u8 pn533_data_checksum(u8 *data, int datalen) return pn533_checksum(sum); } -/** - * pn533_tx_frame_ack - create a ack frame - * @frame: The frame to be set as ack - * - * Ack is different type of standard frame. As a standard frame, it has - * preamble and start_frame. However the checksum of this frame must fail, - * i.e. datalen + datalen_checksum must NOT be zero. When the checksum test - * fails and datalen = 0 and datalen_checksum = 0xFF, the frame is a ack. - * After datalen_checksum field, the postamble is placed. - */ -static void pn533_tx_frame_ack(struct pn533_frame *frame) -{ - frame->preamble = 0; - frame->start_frame = cpu_to_be16(PN533_SOF); - frame->datalen = 0; - frame->datalen_checksum = 0xFF; - /* data[0] is used as postamble */ - frame->data[0] = 0; -} - static void pn533_tx_frame_init(struct pn533_frame *frame, u8 cmd) { frame->preamble = 0; @@ -612,14 +593,14 @@ static int pn533_submit_urb_for_ack(struct pn533 *dev, gfp_t flags) static int pn533_send_ack(struct pn533 *dev, gfp_t flags) { + u8 ack[PN533_FRAME_ACK_SIZE] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; + /* spec 7.1.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - pn533_tx_frame_ack(dev->out_frame); - - dev->out_urb->transfer_buffer = dev->out_frame; - dev->out_urb->transfer_buffer_length = PN533_FRAME_ACK_SIZE; + dev->out_urb->transfer_buffer = ack; + dev->out_urb->transfer_buffer_length = sizeof(ack); rc = usb_submit_urb(dev->out_urb, flags); return rc; -- cgit v0.10.2 From e8f40531113c7e8c6266886803d5bf3a9e5c8d1b Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:57 +0100 Subject: NFC: pn533: Use skb in __pn533_send_cmd_frame_asyn __pn533_send_cmd_frame_async() should be frame type independent. So, don't use pn533_frame type params and instead use skb for req and resp pointers. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 5bc0c7c..cfbfc11 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -606,28 +606,27 @@ static int pn533_send_ack(struct pn533 *dev, gfp_t flags) return rc; } -static int __pn533_send_cmd_frame_async(struct pn533 *dev, - struct pn533_frame *out_frame, - struct pn533_frame *in_frame, - int in_frame_len, +static int __pn533_send_frame_async(struct pn533 *dev, + struct sk_buff *out, + struct sk_buff *in, + int in_len, pn533_cmd_complete_t cmd_complete, void *arg) { int rc; - dev->cmd = PN533_FRAME_CMD(out_frame); + dev->cmd = PN533_FRAME_CMD(((struct pn533_frame *)out->data)); dev->cmd_complete = cmd_complete; dev->cmd_complete_arg = arg; - dev->out_urb->transfer_buffer = out_frame; - dev->out_urb->transfer_buffer_length = - PN533_FRAME_SIZE(out_frame); + dev->out_urb->transfer_buffer = out->data; + dev->out_urb->transfer_buffer_length = out->len; - dev->in_urb->transfer_buffer = in_frame; - dev->in_urb->transfer_buffer_length = in_frame_len; + dev->in_urb->transfer_buffer = in->data; + dev->in_urb->transfer_buffer_length = in_len; print_hex_dump(KERN_DEBUG, "PN533 TX: ", DUMP_PREFIX_NONE, 16, 1, - out_frame, PN533_FRAME_SIZE(out_frame), false); + out->data, out->len, false); rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); if (rc) @@ -725,11 +724,8 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, mutex_lock(&dev->cmd_lock); if (!dev->cmd_pending) { - rc = __pn533_send_cmd_frame_async(dev, - (struct pn533_frame *)req->data, - (struct pn533_frame *)resp->data, - resp_len, pn533_send_async_complete, - arg); + rc = __pn533_send_frame_async(dev, req, resp, resp_len, + pn533_send_async_complete, arg); if (rc) goto error; @@ -844,10 +840,8 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, pn533_build_cmd_frame(cmd_code, req); - rc = __pn533_send_cmd_frame_async(dev, (struct pn533_frame *)req->data, - (struct pn533_frame *)resp->data, - resp_len, pn533_send_async_complete, - arg); + rc = __pn533_send_frame_async(dev, req, resp, resp_len, + pn533_send_async_complete, arg); if (rc < 0) { dev_kfree_skb(resp); kfree(arg); @@ -875,12 +869,10 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - __pn533_send_cmd_frame_async(dev, - (struct pn533_frame *)cmd->req->data, - (struct pn533_frame *)cmd->resp->data, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_send_async_complete, - cmd->arg); + __pn533_send_frame_async(dev, cmd->req, cmd->resp, + PN533_NORMAL_FRAME_MAX_LEN, + pn533_send_async_complete, + cmd->arg); kfree(cmd); } -- cgit v0.10.2 From a5798094e927847f0d503b756a997175d7ce01ec Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:58 +0100 Subject: NFC: pn533: Remove deprecated dev->out_frame buff As it's not used anymore get rid of that buffer. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index cfbfc11..82867a0 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -327,8 +327,6 @@ struct pn533 { struct nfc_dev *nfc_dev; struct urb *out_urb; - struct pn533_frame *out_frame; - struct urb *in_urb; struct sk_buff_head resp_q; @@ -2427,10 +2425,9 @@ static int pn533_probe(struct usb_interface *interface, } dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); - dev->out_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->out_frame || !dev->in_urb || !dev->out_urb) + if (!dev->in_urb || !dev->out_urb) goto error; usb_fill_bulk_urb(dev->in_urb, dev->udev, @@ -2515,7 +2512,6 @@ destroy_wq: destroy_workqueue(dev->wq); error: usb_free_urb(dev->in_urb); - kfree(dev->out_frame); usb_free_urb(dev->out_urb); kfree(dev); return rc; @@ -2547,7 +2543,6 @@ static void pn533_disconnect(struct usb_interface *interface) } usb_free_urb(dev->in_urb); - kfree(dev->out_frame); usb_free_urb(dev->out_urb); kfree(dev); -- cgit v0.10.2 From 0c33d2626d651f3f52d6a1e8b612e2830a4ab71f Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:59 +0100 Subject: NFC: pn533: Cleanup pn533_cmd_complete_t 'params' arg in pn533_cmd_complete_t definition has been deprecated and currently is not in use (resp skb is pass in arg ptr), so remove it. Also 'params_len' arg is used as a transfer status indicator, so simply reword it appropriately. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 82867a0..db13cd7 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -109,8 +109,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); /* PN533 Commands */ #define PN533_FRAME_CMD(f) (f->data[1]) -#define PN533_FRAME_CMD_PARAMS_PTR(f) (&f->data[2]) -#define PN533_FRAME_CMD_PARAMS_LEN(f) (f->datalen - 2) #define PN533_CMD_GET_FIRMWARE_VERSION 0x02 #define PN533_CMD_RF_CONFIGURATION 0x32 @@ -135,8 +133,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table); struct pn533; -typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, - u8 *params, int params_len); +typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, int status); typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg, struct sk_buff *resp); @@ -458,19 +455,9 @@ static bool pn533_rx_frame_is_cmd_response(struct pn533_frame *frame, u8 cmd) static void pn533_wq_cmd_complete(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, cmd_complete_work); - struct pn533_frame *in_frame; int rc; - in_frame = dev->wq_in_frame; - - if (dev->wq_in_error) - rc = dev->cmd_complete(dev, dev->cmd_complete_arg, NULL, - dev->wq_in_error); - else - rc = dev->cmd_complete(dev, dev->cmd_complete_arg, - PN533_FRAME_CMD_PARAMS_PTR(in_frame), - PN533_FRAME_CMD_PARAMS_LEN(in_frame)); - + rc = dev->cmd_complete(dev, dev->cmd_complete_arg, dev->wq_in_error); if (rc != -EINPROGRESS) queue_work(dev->wq, &dev->cmd_work); } @@ -664,8 +651,7 @@ struct pn533_send_async_complete_arg { struct sk_buff *req; }; -static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, - int params_len) +static int pn533_send_async_complete(struct pn533 *dev, void *_arg, int status) { struct pn533_send_async_complete_arg *arg = _arg; @@ -677,12 +663,12 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, dev_kfree_skb(req); - if (params_len < 0) { + if (status < 0) { arg->complete_cb(dev, arg->complete_cb_context, - ERR_PTR(params_len)); - rc = params_len; + ERR_PTR(status)); dev_kfree_skb(resp); - goto out; + kfree(arg); + return status; } skb_put(resp, PN533_FRAME_SIZE(frame)); @@ -691,7 +677,6 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, rc = arg->complete_cb(dev, arg->complete_cb_context, resp); -out: kfree(arg); return rc; } -- cgit v0.10.2 From 16f7541914e8bee0e76c510c4d8bc5ad8a5edf00 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:43:00 +0100 Subject: NFC: pn533: Remove unused dev->wq_in_frame Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index db13cd7..58f7f2c 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -335,7 +335,6 @@ struct pn533 { struct work_struct mi_work; struct work_struct tg_work; struct timer_list listen_timer; - struct pn533_frame *wq_in_frame; int wq_in_error; int cancel_listen; @@ -467,8 +466,6 @@ static void pn533_recv_response(struct urb *urb) struct pn533 *dev = urb->context; struct pn533_frame *in_frame; - dev->wq_in_frame = NULL; - switch (urb->status) { case 0: break; /* success */ @@ -508,7 +505,6 @@ static void pn533_recv_response(struct urb *urb) } dev->wq_in_error = 0; - dev->wq_in_frame = in_frame; sched_wq: queue_work(dev->wq, &dev->cmd_complete_work); @@ -565,7 +561,6 @@ static void pn533_recv_ack(struct urb *urb) return; sched_wq: - dev->wq_in_frame = NULL; queue_work(dev->wq, &dev->cmd_complete_work); } -- cgit v0.10.2 From 9e2d493e74aca105aa86de56dbf80a0a654c4c53 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:43:01 +0100 Subject: NFC: pn533: Introduce ops for frame logic Encapsulate whole frame logic (tx/rx frame structure and size) inside the ops structure to make the core driver generic for devices which handle frames in non standard menner (different then pn533 spec say). Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 58f7f2c..e8c0832 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -79,9 +79,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_LISTEN_TIME 2 /* frame definitions */ -#define PN533_NORMAL_FRAME_MAX_LEN 262 /* 6 (PREAMBLE, SOF, LEN, LCS, TFI) - 254 (DATA) - 2 (DCS, postamble) */ #define PN533_FRAME_HEADER_LEN (sizeof(struct pn533_frame) \ + 2) /* data[0] TFI, data[1] CC */ #define PN533_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ @@ -92,8 +89,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); */ #define PN533_FRAME_MAX_PAYLOAD_LEN 263 -#define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ - PN533_FRAME_TAIL_LEN) #define PN533_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */ #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) @@ -361,6 +356,8 @@ struct pn533 { struct list_head cmd_queue; u8 cmd_pending; + + struct pn533_frame_ops *ops; }; struct pn533_cmd { @@ -368,6 +365,7 @@ struct pn533_cmd { u8 cmd_code; struct sk_buff *req; struct sk_buff *resp; + int resp_len; void *arg; }; @@ -379,6 +377,22 @@ struct pn533_frame { u8 data[]; } __packed; +struct pn533_frame_ops { + void (*tx_frame_init)(void *frame, u8 cmd_code); + void (*tx_frame_finish)(void *frame); + void (*tx_update_payload_len)(void *frame, int len); + int tx_header_len; + int tx_tail_len; + + bool (*rx_is_frame_valid)(void *frame); + int (*rx_frame_size)(void *frame); + int rx_header_len; + int rx_tail_len; + + int max_payload_len; + u8 (*get_cmd_code)(void *frame); +}; + /* The rule: value + checksum = 0 */ static inline u8 pn533_checksum(u8 value) { @@ -397,17 +411,21 @@ static u8 pn533_data_checksum(u8 *data, int datalen) return pn533_checksum(sum); } -static void pn533_tx_frame_init(struct pn533_frame *frame, u8 cmd) +static void pn533_tx_frame_init(void *_frame, u8 cmd_code) { + struct pn533_frame *frame = _frame; + frame->preamble = 0; frame->start_frame = cpu_to_be16(PN533_SOF); PN533_FRAME_IDENTIFIER(frame) = PN533_DIR_OUT; - PN533_FRAME_CMD(frame) = cmd; + PN533_FRAME_CMD(frame) = cmd_code; frame->datalen = 2; } -static void pn533_tx_frame_finish(struct pn533_frame *frame) +static void pn533_tx_frame_finish(void *_frame) { + struct pn533_frame *frame = _frame; + frame->datalen_checksum = pn533_checksum(frame->datalen); PN533_FRAME_CHECKSUM(frame) = @@ -416,9 +434,17 @@ static void pn533_tx_frame_finish(struct pn533_frame *frame) PN533_FRAME_POSTAMBLE(frame) = 0; } -static bool pn533_rx_frame_is_valid(struct pn533_frame *frame) +static void pn533_tx_update_payload_len(void *_frame, int len) +{ + struct pn533_frame *frame = _frame; + + frame->datalen += len; +} + +static bool pn533_rx_frame_is_valid(void *_frame) { u8 checksum; + struct pn533_frame *frame = _frame; if (frame->start_frame != cpu_to_be16(PN533_SOF)) return false; @@ -445,9 +471,39 @@ static bool pn533_rx_frame_is_ack(struct pn533_frame *frame) return true; } -static bool pn533_rx_frame_is_cmd_response(struct pn533_frame *frame, u8 cmd) +static inline int pn533_rx_frame_size(void *frame) +{ + struct pn533_frame *f = frame; + + return sizeof(struct pn533_frame) + f->datalen + PN533_FRAME_TAIL_LEN; +} + +static u8 pn533_get_cmd_code(void *frame) +{ + struct pn533_frame *f = frame; + + return PN533_FRAME_CMD(f); +} + +struct pn533_frame_ops pn533_std_frame_ops = { + .tx_frame_init = pn533_tx_frame_init, + .tx_frame_finish = pn533_tx_frame_finish, + .tx_update_payload_len = pn533_tx_update_payload_len, + .tx_header_len = PN533_FRAME_HEADER_LEN, + .tx_tail_len = PN533_FRAME_TAIL_LEN, + + .rx_is_frame_valid = pn533_rx_frame_is_valid, + .rx_frame_size = pn533_rx_frame_size, + .rx_header_len = PN533_FRAME_HEADER_LEN, + .rx_tail_len = PN533_FRAME_TAIL_LEN, + + .max_payload_len = PN533_FRAME_MAX_PAYLOAD_LEN, + .get_cmd_code = pn533_get_cmd_code, +}; + +static bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame) { - return (PN533_FRAME_CMD(frame) == PN533_CMD_RESPONSE(cmd)); + return (dev->ops->get_cmd_code(frame) == PN533_CMD_RESPONSE(dev->cmd)); } @@ -464,7 +520,7 @@ static void pn533_wq_cmd_complete(struct work_struct *work) static void pn533_recv_response(struct urb *urb) { struct pn533 *dev = urb->context; - struct pn533_frame *in_frame; + u8 *in_frame; switch (urb->status) { case 0: @@ -489,15 +545,15 @@ static void pn533_recv_response(struct urb *urb) nfc_dev_dbg(&dev->interface->dev, "Received a frame."); print_hex_dump(KERN_DEBUG, "PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, - in_frame, PN533_FRAME_SIZE(in_frame), false); + in_frame, dev->ops->rx_frame_size(in_frame), false); - if (!pn533_rx_frame_is_valid(in_frame)) { + if (!dev->ops->rx_is_frame_valid(in_frame)) { nfc_dev_err(&dev->interface->dev, "Received an invalid frame"); dev->wq_in_error = -EIO; goto sched_wq; } - if (!pn533_rx_frame_is_cmd_response(in_frame, dev->cmd)) { + if (!pn533_rx_frame_is_cmd_response(dev, in_frame)) { nfc_dev_err(&dev->interface->dev, "It it not the response to the last command"); dev->wq_in_error = -EIO; @@ -595,7 +651,7 @@ static int __pn533_send_frame_async(struct pn533 *dev, { int rc; - dev->cmd = PN533_FRAME_CMD(((struct pn533_frame *)out->data)); + dev->cmd = dev->ops->get_cmd_code(out->data); dev->cmd_complete = cmd_complete; dev->cmd_complete_arg = arg; @@ -623,20 +679,20 @@ error: return rc; } -static void pn533_build_cmd_frame(u8 cmd_code, struct sk_buff *skb) +static void pn533_build_cmd_frame(struct pn533 *dev, u8 cmd_code, + struct sk_buff *skb) { - struct pn533_frame *frame; /* payload is already there, just update datalen */ int payload_len = skb->len; + struct pn533_frame_ops *ops = dev->ops; - skb_push(skb, PN533_FRAME_HEADER_LEN); - skb_put(skb, PN533_FRAME_TAIL_LEN); - frame = (struct pn533_frame *)skb->data; + skb_push(skb, ops->tx_header_len); + skb_put(skb, ops->tx_tail_len); - pn533_tx_frame_init(frame, cmd_code); - frame->datalen += payload_len; - pn533_tx_frame_finish(frame); + ops->tx_frame_init(skb->data, cmd_code); + ops->tx_update_payload_len(skb->data, payload_len); + ops->tx_frame_finish(skb->data); } struct pn533_send_async_complete_arg { @@ -653,7 +709,6 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, int status) struct sk_buff *req = arg->req; struct sk_buff *resp = arg->resp; - struct pn533_frame *frame = (struct pn533_frame *)resp->data; int rc; dev_kfree_skb(req); @@ -666,9 +721,9 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, int status) return status; } - skb_put(resp, PN533_FRAME_SIZE(frame)); - skb_pull(resp, PN533_FRAME_HEADER_LEN); - skb_trim(resp, resp->len - PN533_FRAME_TAIL_LEN); + skb_put(resp, dev->ops->rx_frame_size(resp->data)); + skb_pull(resp, dev->ops->rx_header_len); + skb_trim(resp, resp->len - dev->ops->rx_tail_len); rc = arg->complete_cb(dev, arg->complete_cb_context, resp); @@ -697,7 +752,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, arg->resp = resp; arg->req = req; - pn533_build_cmd_frame(cmd_code, req); + pn533_build_cmd_frame(dev, cmd_code, req); mutex_lock(&dev->cmd_lock); @@ -724,6 +779,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, cmd->cmd_code = cmd_code; cmd->req = req; cmd->resp = resp; + cmd->resp_len = resp_len; cmd->arg = arg; list_add_tail(&cmd->queue, &dev->cmd_queue); @@ -744,9 +800,9 @@ static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, { struct sk_buff *resp; int rc; - int resp_len = PN533_FRAME_HEADER_LEN + - PN533_FRAME_MAX_PAYLOAD_LEN + - PN533_FRAME_TAIL_LEN; + int resp_len = dev->ops->rx_header_len + + dev->ops->max_payload_len + + dev->ops->rx_tail_len; resp = nfc_alloc_recv_skb(resp_len, GFP_KERNEL); if (!resp) @@ -767,14 +823,16 @@ static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, { struct sk_buff *resp; int rc; + int resp_len = dev->ops->rx_header_len + + dev->ops->max_payload_len + + dev->ops->rx_tail_len; - resp = alloc_skb(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); + resp = alloc_skb(resp_len, GFP_KERNEL); if (!resp) return -ENOMEM; - rc = __pn533_send_async(dev, cmd_code, req, resp, - PN533_NORMAL_FRAME_MAX_LEN, - complete_cb, complete_cb_context); + rc = __pn533_send_async(dev, cmd_code, req, resp, resp_len, complete_cb, + complete_cb_context); if (rc) dev_kfree_skb(resp); @@ -797,9 +855,9 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, struct pn533_send_async_complete_arg *arg; struct sk_buff *resp; int rc; - int resp_len = PN533_FRAME_HEADER_LEN + - PN533_FRAME_MAX_PAYLOAD_LEN + - PN533_FRAME_TAIL_LEN; + int resp_len = dev->ops->rx_header_len + + dev->ops->max_payload_len + + dev->ops->rx_tail_len; resp = alloc_skb(resp_len, GFP_KERNEL); if (!resp) @@ -816,7 +874,7 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, arg->resp = resp; arg->req = req; - pn533_build_cmd_frame(cmd_code, req); + pn533_build_cmd_frame(dev, cmd_code, req); rc = __pn533_send_frame_async(dev, req, resp, resp_len, pn533_send_async_complete, arg); @@ -847,10 +905,8 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - __pn533_send_frame_async(dev, cmd->req, cmd->resp, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_send_async_complete, - cmd->arg); + __pn533_send_frame_async(dev, cmd->req, cmd->resp, cmd->resp_len, + pn533_send_async_complete, cmd->arg); kfree(cmd); } @@ -928,16 +984,16 @@ static void pn533_send_complete(struct urb *urb) } } -static struct sk_buff *pn533_alloc_skb(unsigned int size) +static struct sk_buff *pn533_alloc_skb(struct pn533 *dev, unsigned int size) { struct sk_buff *skb; - skb = alloc_skb(PN533_FRAME_HEADER_LEN + + skb = alloc_skb(dev->ops->tx_header_len + size + - PN533_FRAME_TAIL_LEN, GFP_KERNEL); + dev->ops->tx_tail_len, GFP_KERNEL); if (skb) - skb_reserve(skb, PN533_FRAME_HEADER_LEN); + skb_reserve(skb, dev->ops->tx_header_len); return skb; } @@ -1297,11 +1353,14 @@ static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp) return -EAGAIN; } -static struct sk_buff *pn533_alloc_poll_tg_frame(u8 *gbytes, size_t gbytes_len) +static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev) { struct sk_buff *skb; u8 *felica, *nfcid3, *gb; + u8 *gbytes = dev->gb; + size_t gbytes_len = dev->gb_len; + u8 felica_params[18] = {0x1, 0xfe, /* DEP */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @@ -1316,7 +1375,7 @@ static struct sk_buff *pn533_alloc_poll_tg_frame(u8 *gbytes, size_t gbytes_len) gbytes_len + 1; /* len Tk*/ - skb = pn533_alloc_skb(skb_len); + skb = pn533_alloc_skb(dev, skb_len); if (!skb) return NULL; @@ -1382,7 +1441,7 @@ static void pn533_wq_tg_get_data(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(0); + skb = pn533_alloc_skb(dev, 0); if (!skb) return; @@ -1507,12 +1566,12 @@ stop_poll: return rc; } -static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533_poll_modulations - *mod) +static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533 *dev, + struct pn533_poll_modulations *mod) { struct sk_buff *skb; - skb = pn533_alloc_skb(mod->len); + skb = pn533_alloc_skb(dev, mod->len); if (!skb) return NULL; @@ -1535,10 +1594,10 @@ static int pn533_send_poll_frame(struct pn533 *dev) if (mod->len == 0) { /* Listen mode */ cmd_code = PN533_CMD_TG_INIT_AS_TARGET; - skb = pn533_alloc_poll_tg_frame(dev->gb, dev->gb_len); + skb = pn533_alloc_poll_tg_frame(dev); } else { /* Polling mode */ cmd_code = PN533_CMD_IN_LIST_PASSIVE_TARGET; - skb = pn533_alloc_poll_in_frame(mod); + skb = pn533_alloc_poll_in_frame(dev, mod); } if (!skb) { @@ -1652,7 +1711,7 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(sizeof(u8) * 2); /*TG + Next*/ + skb = pn533_alloc_skb(dev, sizeof(u8) * 2); /*TG + Next*/ if (!skb) return -ENOMEM; @@ -1746,7 +1805,7 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, dev->tgt_active_prot = 0; skb_queue_purge(&dev->resp_q); - skb = pn533_alloc_skb(sizeof(u8)); + skb = pn533_alloc_skb(dev, sizeof(u8)); if (!skb) return; @@ -1877,7 +1936,7 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, if (comm_mode == NFC_COMM_PASSIVE) skb_len += PASSIVE_DATA_LEN; - skb = pn533_alloc_skb(skb_len); + skb = pn533_alloc_skb(dev, skb_len); if (!skb) return -ENOMEM; @@ -2161,7 +2220,7 @@ static void pn533_wq_mi_recv(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); + skb = pn533_alloc_skb(dev, PN533_CMD_DATAEXCH_HEAD_LEN); if (!skb) goto error; @@ -2214,7 +2273,7 @@ static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */ - skb = pn533_alloc_skb(skb_len); + skb = pn533_alloc_skb(dev, skb_len); if (!skb) return -ENOMEM; @@ -2235,7 +2294,7 @@ static int pn533_get_firmware_version(struct pn533 *dev, struct sk_buff *skb; struct sk_buff *resp; - skb = pn533_alloc_skb(0); + skb = pn533_alloc_skb(dev, 0); if (!skb) return -ENOMEM; @@ -2259,7 +2318,7 @@ static int pn533_fw_reset(struct pn533 *dev) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(sizeof(u8)); + skb = pn533_alloc_skb(dev, sizeof(u8)); if (!skb) return -ENOMEM; @@ -2436,14 +2495,7 @@ static int pn533_probe(struct usb_interface *interface, usb_set_intfdata(interface, dev); - memset(&fw_ver, 0, sizeof(fw_ver)); - rc = pn533_get_firmware_version(dev, &fw_ver); - if (rc < 0) - goto destroy_wq; - - nfc_dev_info(&dev->interface->dev, - "NXP PN533 firmware ver %d.%d now attached", - fw_ver.ver, fw_ver.rev); + dev->ops = &pn533_std_frame_ops; dev->device_type = id->driver_info; switch (dev->device_type) { @@ -2462,10 +2514,20 @@ static int pn533_probe(struct usb_interface *interface, goto destroy_wq; } + memset(&fw_ver, 0, sizeof(fw_ver)); + rc = pn533_get_firmware_version(dev, &fw_ver); + if (rc < 0) + goto destroy_wq; + + nfc_dev_info(&dev->interface->dev, + "NXP PN533 firmware ver %d.%d now attached", + fw_ver.ver, fw_ver.rev); + + dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, - PN533_FRAME_HEADER_LEN + + dev->ops->tx_header_len + PN533_CMD_DATAEXCH_HEAD_LEN, - PN533_FRAME_TAIL_LEN); + dev->ops->tx_tail_len); if (!dev->nfc_dev) goto destroy_wq; -- cgit v0.10.2 From 5f4d6214ef5e9b1ff6a72ddfa387c1d72adfac98 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 6 Dec 2012 23:10:40 +0100 Subject: NFC: nfcwilink: Use devm_kzalloc devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index 50b1ee4..c7c182d 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -526,7 +526,7 @@ static int nfcwilink_probe(struct platform_device *pdev) nfc_dev_dbg(&pdev->dev, "probe entry"); - drv = kzalloc(sizeof(struct nfcwilink), GFP_KERNEL); + drv = devm_kzalloc(&pdev->dev, sizeof(struct nfcwilink), GFP_KERNEL); if (!drv) { rc = -ENOMEM; goto exit; @@ -547,7 +547,7 @@ static int nfcwilink_probe(struct platform_device *pdev) if (!drv->ndev) { nfc_dev_err(&pdev->dev, "nci_allocate_device failed"); rc = -ENOMEM; - goto free_exit; + goto exit; } nci_set_parent_dev(drv->ndev, &pdev->dev); @@ -566,9 +566,6 @@ static int nfcwilink_probe(struct platform_device *pdev) free_dev_exit: nci_free_device(drv->ndev); -free_exit: - kfree(drv); - exit: return rc; } @@ -588,8 +585,6 @@ static int nfcwilink_remove(struct platform_device *pdev) nci_unregister_device(ndev); nci_free_device(ndev); - kfree(drv); - dev_set_drvdata(&pdev->dev, NULL); return 0; -- cgit v0.10.2 From f0c9103813b3045bd5b43220b6a78c9908a45d24 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Mon, 26 Nov 2012 18:06:27 +0100 Subject: NFC: Fixed nfc core and hci unregistration and cleanup When an adapter is removed, it will unregister itself from hci and/or nfc core. In order to do that safely, work tasks must first be canceled and prevented to be scheduled again, before the hci or nfc device can be destroyed. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 671953e..e622457 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -87,6 +87,8 @@ struct nfc_hci_dev { u32 max_data_link_payload; + bool shutting_down; + struct mutex msg_tx_mutex; struct list_head msg_tx_queue; diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index fce80b2..1665674 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -115,6 +115,8 @@ struct nfc_dev { struct timer_list check_pres_timer; struct work_struct check_pres_work; + bool shutting_down; + struct nfc_ops *ops; }; #define to_nfc_dev(_dev) container_of(_dev, struct nfc_dev, dev) diff --git a/net/nfc/core.c b/net/nfc/core.c index aa64ea4..7d7b4ee 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -338,7 +338,7 @@ int nfc_activate_target(struct nfc_dev *dev, u32 target_idx, u32 protocol) dev->active_target = target; dev->rf_mode = NFC_RF_INITIATOR; - if (dev->ops->check_presence) + if (dev->ops->check_presence && !dev->shutting_down) mod_timer(&dev->check_pres_timer, jiffies + msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); } @@ -429,7 +429,7 @@ int nfc_data_exchange(struct nfc_dev *dev, u32 target_idx, struct sk_buff *skb, rc = dev->ops->im_transceive(dev, dev->active_target, skb, cb, cb_context); - if (!rc && dev->ops->check_presence) + if (!rc && dev->ops->check_presence && !dev->shutting_down) mod_timer(&dev->check_pres_timer, jiffies + msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); } else if (dev->rf_mode == NFC_RF_TARGET && dev->ops->tm_send != NULL) { @@ -684,11 +684,6 @@ static void nfc_release(struct device *d) pr_debug("dev_name=%s\n", dev_name(&dev->dev)); - if (dev->ops->check_presence) { - del_timer_sync(&dev->check_pres_timer); - cancel_work_sync(&dev->check_pres_work); - } - nfc_genl_data_exit(&dev->genl_data); kfree(dev->targets); kfree(dev); @@ -706,15 +701,16 @@ static void nfc_check_pres_work(struct work_struct *work) rc = dev->ops->check_presence(dev, dev->active_target); if (rc == -EOPNOTSUPP) goto exit; - if (!rc) { - mod_timer(&dev->check_pres_timer, jiffies + - msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); - } else { + if (rc) { u32 active_target_idx = dev->active_target->idx; device_unlock(&dev->dev); nfc_target_lost(dev, active_target_idx); return; } + + if (!dev->shutting_down) + mod_timer(&dev->check_pres_timer, jiffies + + msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); } exit: @@ -853,26 +849,27 @@ void nfc_unregister_device(struct nfc_dev *dev) id = dev->idx; - mutex_lock(&nfc_devlist_mutex); - nfc_devlist_generation++; - - /* lock to avoid unregistering a device while an operation - is in progress */ - device_lock(&dev->dev); - device_del(&dev->dev); - device_unlock(&dev->dev); + if (dev->ops->check_presence) { + device_lock(&dev->dev); + dev->shutting_down = true; + device_unlock(&dev->dev); + del_timer_sync(&dev->check_pres_timer); + cancel_work_sync(&dev->check_pres_work); + } - mutex_unlock(&nfc_devlist_mutex); + rc = nfc_genl_device_removed(dev); + if (rc) + pr_debug("The userspace won't be notified that the device %s " + "was removed\n", dev_name(&dev->dev)); nfc_llcp_unregister_device(dev); - rc = nfc_genl_device_removed(dev); - if (rc) - pr_debug("The userspace won't be notified that the device %s was removed\n", - dev_name(&dev->dev)); + mutex_lock(&nfc_devlist_mutex); + nfc_devlist_generation++; + device_del(&dev->dev); + mutex_unlock(&nfc_devlist_mutex); ida_simple_remove(&nfc_index_ida, id); - } EXPORT_SYMBOL(nfc_unregister_device); diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index 7bea574..b4b8426 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -57,6 +57,8 @@ static void nfc_hci_msg_tx_work(struct work_struct *work) int r = 0; mutex_lock(&hdev->msg_tx_mutex); + if (hdev->shutting_down) + goto exit; if (hdev->cmd_pending_msg) { if (timer_pending(&hdev->cmd_timer) == 0) { @@ -868,6 +870,28 @@ void nfc_hci_unregister_device(struct nfc_hci_dev *hdev) { struct hci_msg *msg, *n; + mutex_lock(&hdev->msg_tx_mutex); + + if (hdev->cmd_pending_msg) { + if (hdev->cmd_pending_msg->cb) + hdev->cmd_pending_msg->cb( + hdev->cmd_pending_msg->cb_context, + NULL, -ESHUTDOWN); + kfree(hdev->cmd_pending_msg); + hdev->cmd_pending_msg = NULL; + } + + hdev->shutting_down = true; + + mutex_unlock(&hdev->msg_tx_mutex); + + del_timer_sync(&hdev->cmd_timer); + cancel_work_sync(&hdev->msg_tx_work); + + cancel_work_sync(&hdev->msg_rx_work); + + nfc_unregister_device(hdev->ndev); + skb_queue_purge(&hdev->rx_hcp_frags); skb_queue_purge(&hdev->msg_rx_queue); @@ -876,13 +900,6 @@ void nfc_hci_unregister_device(struct nfc_hci_dev *hdev) skb_queue_purge(&msg->msg_frags); kfree(msg); } - - del_timer_sync(&hdev->cmd_timer); - - nfc_unregister_device(hdev->ndev); - - cancel_work_sync(&hdev->msg_tx_work); - cancel_work_sync(&hdev->msg_rx_work); } EXPORT_SYMBOL(nfc_hci_unregister_device); diff --git a/net/nfc/hci/hcp.c b/net/nfc/hci/hcp.c index bc308a7..b6b4109 100644 --- a/net/nfc/hci/hcp.c +++ b/net/nfc/hci/hcp.c @@ -105,6 +105,13 @@ int nfc_hci_hcp_message_tx(struct nfc_hci_dev *hdev, u8 pipe, } mutex_lock(&hdev->msg_tx_mutex); + + if (hdev->shutting_down) { + err = -ESHUTDOWN; + mutex_unlock(&hdev->msg_tx_mutex); + goto out_skb_err; + } + list_add_tail(&cmd->msg_l, &hdev->msg_tx_queue); mutex_unlock(&hdev->msg_tx_mutex); -- cgit v0.10.2 From 27c31191b3d7ff32c266a5dbea344b9aa96ebf14 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Wed, 28 Nov 2012 15:48:44 +0100 Subject: NFC: Added error handling in event_received hci ops There is no use to return an error if the caller doesn't get it. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index cc666de..4af70f9 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -714,8 +714,8 @@ static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, return 0; } -static void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, - u8 event, struct sk_buff *skb) +static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb) { struct sk_buff *rgb_skb = NULL; int r = 0; @@ -724,25 +724,23 @@ static void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, switch (event) { case PN544_HCI_EVT_ACTIVATED: if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) - nfc_hci_target_discovered(hdev, gate); + r = nfc_hci_target_discovered(hdev, gate); else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ, - &rgb_skb); - + &rgb_skb); if (r < 0) goto exit; - nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, - NFC_COMM_PASSIVE, rgb_skb->data, - rgb_skb->len); + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, rgb_skb->data, + rgb_skb->len); kfree_skb(rgb_skb); } - break; case PN544_HCI_EVT_DEACTIVATED: - nfc_hci_send_event(hdev, gate, - NFC_HCI_EVT_END_OPERATION, NULL, 0); + r = nfc_hci_send_event(hdev, gate, NFC_HCI_EVT_END_OPERATION, + NULL, 0); break; case PN544_HCI_EVT_RCV_DATA: if (skb->len < 2) { @@ -757,15 +755,16 @@ static void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, } skb_pull(skb, 2); - nfc_tm_data_received(hdev->ndev, skb); - - return; + return nfc_tm_data_received(hdev->ndev, skb); default: + pr_err("Discarded unknown event %x to gate %x\n", event, gate); break; } exit: kfree_skb(skb); + + return r; } static struct nfc_hci_ops pn544_hci_ops = { diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index e622457..834e364 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -57,8 +57,8 @@ struct nfc_hci_ops { int (*tm_send)(struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*check_presence)(struct nfc_hci_dev *hdev, struct nfc_target *target); - void (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, - struct sk_buff *skb); + int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb); }; /* Pipes */ diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index b4b8426..f30f6fe 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -323,16 +323,18 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, break; default: if (hdev->ops->event_received) { - hdev->ops->event_received(hdev, gate, event, skb); - return; + r = hdev->ops->event_received(hdev, gate, event, skb); + goto exit_noskb; + } else { + r = -EINVAL; } - break; } exit: kfree_skb(skb); +exit_noskb: if (r) { /* TODO: There was an error dispatching the event, * how to propagate up to nfc core? -- cgit v0.10.2 From 40d06d3647ea872a7346be1f6859f18cd0fe08d3 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 4 Dec 2012 16:43:24 +0100 Subject: NFC: Changed event_received hci ops result semantic Some chips use a standard HCI event code, destined to a proprietary gate, with a different meaning. Therefore, the HCI driver must always have a chance to intercept the event before standard processing is attempted. The new semantic specifies that the result value "1" means that the driver doesn't especially handle the event. result <= 0 means it was handled. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index 4af70f9..9349c54 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -714,18 +714,23 @@ static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, return 0; } +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, struct sk_buff *skb) { struct sk_buff *rgb_skb = NULL; - int r = 0; + int r; pr_debug("hci event %d", event); switch (event) { case PN544_HCI_EVT_ACTIVATED: - if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) + if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) { r = nfc_hci_target_discovered(hdev, gate); - else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { + } else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ, &rgb_skb); if (r < 0) @@ -736,6 +741,8 @@ static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, rgb_skb->len); kfree_skb(rgb_skb); + } else { + r = -EINVAL; } break; case PN544_HCI_EVT_DEACTIVATED: @@ -757,8 +764,7 @@ static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, skb_pull(skb, 2); return nfc_tm_data_received(hdev->ndev, skb); default: - pr_err("Discarded unknown event %x to gate %x\n", event, gate); - break; + return 1; } exit: diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index f30f6fe..0430f30 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -297,6 +297,12 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, goto exit; } + if (hdev->ops->event_received) { + r = hdev->ops->event_received(hdev, gate, event, skb); + if (r <= 0) + goto exit_noskb; + } + switch (event) { case NFC_HCI_EVT_TARGET_DISCOVERED: if (skb->len < 1) { /* no status data? */ @@ -322,12 +328,8 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, r = nfc_hci_target_discovered(hdev, gate); break; default: - if (hdev->ops->event_received) { - r = hdev->ops->event_received(hdev, gate, event, skb); - goto exit_noskb; - } else { - r = -EINVAL; - } + pr_info("Discarded unknown event %x to gate %x\n", event, gate); + r = -EINVAL; break; } -- cgit v0.10.2 From 924d4a023ee6da2e40c78578829e68bcbabee2dd Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 4 Dec 2012 16:44:25 +0100 Subject: NFC: Fixed skb leak in tm_send() nfc and hci ops implementations Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index 9349c54..cd8fb16 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -675,11 +675,17 @@ static int pn544_hci_im_transceive(struct nfc_hci_dev *hdev, static int pn544_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) { + int r; + /* Set default false for multiple information chaining */ *skb_push(skb, 1) = 0; - return nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, - PN544_HCI_EVT_SND_DATA, skb->data, skb->len); + r = nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, + PN544_HCI_EVT_SND_DATA, skb->data, skb->len); + + kfree_skb(skb); + + return r; } static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index 0430f30..d9190da 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -675,8 +675,10 @@ static int hci_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) if (hdev->ops->tm_send) return hdev->ops->tm_send(hdev, skb); - else - return -ENOTSUPP; + + kfree_skb(skb); + + return -ENOTSUPP; } static int hci_check_presence(struct nfc_dev *nfc_dev, -- cgit v0.10.2 From bf71ab8ba53081c28b960d48e0c4cd1c17588aa6 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 18 Dec 2012 14:15:49 +0100 Subject: NFC: Add HCI quirks to support driver (non)standard implementations Some chips diverge from the HCI spec in their implementation of standard features. This adds a new quirks parameter to nfc_hci_allocate_device() to let the driver indicate its divergence. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index cd8fb16..ece8342 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -833,7 +833,7 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_NFC_DEP_MASK; - info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, + info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0, protocols, llc_name, phy_headroom + PN544_CMDS_HEADROOM, phy_tailroom, phy_payload); diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 834e364..2ff7175 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -82,6 +82,16 @@ typedef int (*xmit) (struct sk_buff *skb, void *cb_data); #define NFC_HCI_MAX_GATES 256 +/* + * These values can be specified by a driver to indicate it requires some + * adaptation of the HCI standard. + * + * NFC_HCI_QUIRK_SHORT_CLEAR - send HCI_ADM_CLEAR_ALL_PIPE cmd with no params + */ +enum { + NFC_HCI_QUIRK_SHORT_CLEAR = 0, +}; + struct nfc_hci_dev { struct nfc_dev *ndev; @@ -131,11 +141,14 @@ struct nfc_hci_dev { u8 *gb; size_t gb_len; + + unsigned long quirks; }; /* hci device allocation */ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, + unsigned long quirks, u32 protocols, const char *llc_name, int tx_headroom, diff --git a/net/nfc/hci/command.c b/net/nfc/hci/command.c index 7d99410..64f922b 100644 --- a/net/nfc/hci/command.c +++ b/net/nfc/hci/command.c @@ -280,14 +280,19 @@ static int nfc_hci_delete_pipe(struct nfc_hci_dev *hdev, u8 pipe) static int nfc_hci_clear_all_pipes(struct nfc_hci_dev *hdev) { u8 param[2]; + size_t param_len = 2; /* TODO: Find out what the identity reference data is * and fill param with it. HCI spec 6.1.3.5 */ pr_debug("\n"); + if (test_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &hdev->quirks)) + param_len = 0; + return nfc_hci_execute_cmd(hdev, NFC_HCI_ADMIN_PIPE, - NFC_HCI_ADM_CLEAR_ALL_PIPE, param, 2, NULL); + NFC_HCI_ADM_CLEAR_ALL_PIPE, param, param_len, + NULL); } int nfc_hci_disconnect_gate(struct nfc_hci_dev *hdev, u8 gate) diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index d9190da..755a6b9 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -795,6 +795,7 @@ static struct nfc_ops hci_nfc_ops = { struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, + unsigned long quirks, u32 protocols, const char *llc_name, int tx_headroom, @@ -838,6 +839,8 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, memset(hdev->gate2pipe, NFC_HCI_INVALID_PIPE, sizeof(hdev->gate2pipe)); + hdev->quirks = quirks; + return hdev; } EXPORT_SYMBOL(nfc_hci_allocate_device); -- cgit v0.10.2 From aa74103071312fede1f4953fe3c027941add1256 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 16:26:23 +0100 Subject: NFC: pn544: Separate the core code and the i2c one into different modules As we may need to support other physical layers, we can avoid linking the core part into each and every pn544 module. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index ec85767..80c728b 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -5,19 +5,6 @@ menu "Near Field Communication (NFC) devices" depends on NFC -config PN544_HCI_NFC - tristate "HCI PN544 NFC driver" - depends on I2C && NFC_HCI && NFC_SHDLC - select CRC_CCITT - default n - ---help--- - NXP PN544 i2c driver. - This is a driver based on the SHDLC and HCI NFC kernel layers and - will thus not work with NXP libnfc library. - - To compile this driver as a module, choose m here. The module will - be called pn544_hci. - config NFC_PN533 tristate "NXP PN533 USB driver" depends on USB @@ -39,4 +26,6 @@ config NFC_WILINK Say Y here to compile support for Texas Instrument's NFC WiLink driver into the kernel or say M to compile it as module. +source "drivers/nfc/pn544/Kconfig" + endmenu diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index 36c3590..574bbc0 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -2,7 +2,7 @@ # Makefile for nfc devices # -obj-$(CONFIG_PN544_HCI_NFC) += pn544/ +obj-$(CONFIG_NFC_PN544) += pn544/ obj-$(CONFIG_NFC_PN533) += pn533.o obj-$(CONFIG_NFC_WILINK) += nfcwilink.o diff --git a/drivers/nfc/pn544/Kconfig b/drivers/nfc/pn544/Kconfig new file mode 100644 index 0000000..c277790 --- /dev/null +++ b/drivers/nfc/pn544/Kconfig @@ -0,0 +1,23 @@ +config NFC_PN544 + tristate "NXP PN544 NFC driver" + depends on NFC_HCI + select CRC_CCITT + default n + ---help--- + NXP PN544 core driver. + This is a driver based on the HCI NFC kernel layers and + will thus not work with NXP libnfc library. + + To compile this driver as a module, choose m here. The module will + be called pn544. + Say N if unsure. + +config NFC_PN544_I2C + tristate "NFC PN544 i2c support" + depends on NFC_PN544 && I2C && NFC_SHDLC + ---help--- + This module adds support for the NXP pn544 i2c interface. + Select this if your platform is using the i2c bus. + + If you choose to build a module, it'll be called pn544_i2c. + Say N if unsure. \ No newline at end of file diff --git a/drivers/nfc/pn544/Makefile b/drivers/nfc/pn544/Makefile index 7257338..ac07679 100644 --- a/drivers/nfc/pn544/Makefile +++ b/drivers/nfc/pn544/Makefile @@ -2,6 +2,7 @@ # Makefile for PN544 HCI based NFC driver # -obj-$(CONFIG_PN544_HCI_NFC) += pn544_i2c.o +pn544_i2c-objs = i2c.o -pn544_i2c-y := pn544.o i2c.o +obj-$(CONFIG_NFC_PN544) += pn544.o +obj-$(CONFIG_NFC_PN544_I2C) += pn544_i2c.o diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index ece8342..d108c79 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -862,6 +863,7 @@ err_alloc_hdev: err_info_alloc: return r; } +EXPORT_SYMBOL(pn544_hci_probe); void pn544_hci_remove(struct nfc_hci_dev *hdev) { @@ -871,3 +873,7 @@ void pn544_hci_remove(struct nfc_hci_dev *hdev) nfc_hci_free_device(hdev); kfree(info); } +EXPORT_SYMBOL(pn544_hci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v0.10.2 From 234d4d6b1038f004f233f14906ec9328bf53088b Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 16:40:16 +0100 Subject: NFC: pn544: Use module_i2c_driver The pn544 init routine does nothing but adding the driver to the i2c bus. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index 7da9071..ec79f35 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -472,29 +472,7 @@ static struct i2c_driver pn544_hci_i2c_driver = { .remove = __devexit_p(pn544_hci_i2c_remove), }; -static int __init pn544_hci_i2c_init(void) -{ - int r; - - pr_debug(DRIVER_DESC ": %s\n", __func__); - - r = i2c_add_driver(&pn544_hci_i2c_driver); - if (r) { - pr_err(PN544_HCI_I2C_DRIVER_NAME - ": driver registration failed\n"); - return r; - } - - return 0; -} - -static void __exit pn544_hci_i2c_exit(void) -{ - i2c_del_driver(&pn544_hci_i2c_driver); -} - -module_init(pn544_hci_i2c_init); -module_exit(pn544_hci_i2c_exit); +module_i2c_driver(pn544_hci_i2c_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v0.10.2 From a0f36536ac2ec0f7a9cfb53c72d6d8c378815fdb Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 18:07:37 +0100 Subject: NFC: pn544: Use devm_kzalloc API Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index ec79f35..7f96ca2 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -376,12 +376,12 @@ static int __devinit pn544_hci_i2c_probe(struct i2c_client *client, return -ENODEV; } - phy = kzalloc(sizeof(struct pn544_i2c_phy), GFP_KERNEL); + phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy), + GFP_KERNEL); if (!phy) { dev_err(&client->dev, "Cannot allocate memory for pn544 i2c phy.\n"); - r = -ENOMEM; - goto err_phy_alloc; + return -ENOMEM; } phy->i2c_dev = client; @@ -390,20 +390,18 @@ static int __devinit pn544_hci_i2c_probe(struct i2c_client *client, pdata = client->dev.platform_data; if (pdata == NULL) { dev_err(&client->dev, "No platform data\n"); - r = -EINVAL; - goto err_pdata; + return -EINVAL; } if (pdata->request_resources == NULL) { dev_err(&client->dev, "request_resources() missing\n"); - r = -EINVAL; - goto err_pdata; + return -EINVAL; } r = pdata->request_resources(client); if (r) { dev_err(&client->dev, "Cannot get platform resources\n"); - goto err_pdata; + return r; } phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE); @@ -435,10 +433,6 @@ err_rti: if (pdata->free_resources != NULL) pdata->free_resources(); -err_pdata: - kfree(phy); - -err_phy_alloc: return r; } @@ -458,8 +452,6 @@ static __devexit int pn544_hci_i2c_remove(struct i2c_client *client) if (pdata->free_resources) pdata->free_resources(); - kfree(phy); - return 0; } -- cgit v0.10.2 From 2ad554a502facd705ce6eb362d0f1ac3ca426508 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 18 Dec 2012 17:35:02 +0100 Subject: NFC: update HCI documentation Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/nfc/nfc-hci.txt index 89a339c..0686c9e 100644 --- a/Documentation/nfc/nfc-hci.txt +++ b/Documentation/nfc/nfc-hci.txt @@ -17,10 +17,12 @@ HCI HCI registers as an nfc device with NFC Core. Requests coming from userspace are routed through netlink sockets to NFC Core and then to HCI. From this point, they are translated in a sequence of HCI commands sent to the HCI layer in the -host controller (the chip). The sending context blocks while waiting for the -response to arrive. +host controller (the chip). Commands can be executed synchronously (the sending +context blocks waiting for response) or asynchronously (the response is returned +from HCI Rx context). HCI events can also be received from the host controller. They will be handled -and a translation will be forwarded to NFC Core as needed. +and a translation will be forwarded to NFC Core as needed. There are hooks to +let the HCI driver handle proprietary events or override standard behavior. HCI uses 2 execution contexts: - one for executing commands : nfc_hci_msg_tx_work(). Only one command can be executing at any given moment. @@ -33,6 +35,8 @@ The Session initialization is an HCI standard which must unfortunately support proprietary gates. This is the reason why the driver will pass a list of proprietary gates that must be part of the session. HCI will ensure all those gates have pipes connected when the hci device is set up. +In case the chip supports pre-opened gates and pseudo-static pipes, the driver +can pass that information to HCI core. HCI Gates and Pipes ------------------- @@ -46,6 +50,13 @@ without knowing the pipe connected to it. Driver interface ---------------- +A driver is generally written in two parts : the physical link management and +the HCI management. This makes it easier to maintain a driver for a chip that +can be connected using various phy (i2c, spi, ...) + +HCI Management +-------------- + A driver would normally register itself with HCI and provide the following entry points: @@ -53,58 +64,113 @@ struct nfc_hci_ops { int (*open)(struct nfc_hci_dev *hdev); void (*close)(struct nfc_hci_dev *hdev); int (*hci_ready) (struct nfc_hci_dev *hdev); - int (*xmit)(struct nfc_hci_dev *hdev, struct sk_buff *skb); - int (*start_poll)(struct nfc_hci_dev *hdev, u32 protocols); - int (*target_from_gate)(struct nfc_hci_dev *hdev, u8 gate, - struct nfc_target *target); + int (*xmit) (struct nfc_hci_dev *hdev, struct sk_buff *skb); + int (*start_poll) (struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols); + int (*dep_link_up)(struct nfc_hci_dev *hdev, struct nfc_target *target, + u8 comm_mode, u8 *gb, size_t gb_len); + int (*dep_link_down)(struct nfc_hci_dev *hdev); + int (*target_from_gate) (struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target); int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate, struct nfc_target *target); - int (*data_exchange) (struct nfc_hci_dev *hdev, - struct nfc_target *target, - struct sk_buff *skb, struct sk_buff **res_skb); + int (*im_transceive) (struct nfc_hci_dev *hdev, + struct nfc_target *target, struct sk_buff *skb, + data_exchange_cb_t cb, void *cb_context); + int (*tm_send)(struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*check_presence)(struct nfc_hci_dev *hdev, struct nfc_target *target); + int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb); }; - open() and close() shall turn the hardware on and off. - hci_ready() is an optional entry point that is called right after the hci session has been set up. The driver can use it to do additional initialization that must be performed using HCI commands. -- xmit() shall simply write a frame to the chip. +- xmit() shall simply write a frame to the physical link. - start_poll() is an optional entrypoint that shall set the hardware in polling mode. This must be implemented only if the hardware uses proprietary gates or a mechanism slightly different from the HCI standard. +- dep_link_up() is called after a p2p target has been detected, to finish +the p2p connection setup with hardware parameters that need to be passed back +to nfc core. +- dep_link_down() is called to bring the p2p link down. - target_from_gate() is an optional entrypoint to return the nfc protocols corresponding to a proprietary gate. - complete_target_discovered() is an optional entry point to let the driver perform additional proprietary processing necessary to auto activate the discovered target. -- data_exchange() must be implemented by the driver if proprietary HCI commands +- im_transceive() must be implemented by the driver if proprietary HCI commands are required to send data to the tag. Some tag types will require custom commands, others can be written to using the standard HCI commands. The driver can check the tag type and either do proprietary processing, or return 1 to ask -for standard processing. +for standard processing. The data exchange command itself must be sent +asynchronously. +- tm_send() is called to send data in the case of a p2p connection - check_presence() is an optional entry point that will be called regularly by the core to check that an activated tag is still in the field. If this is not implemented, the core will not be able to push tag_lost events to the user space +- event_received() is called to handle an event coming from the chip. Driver +can handle the event or return 1 to let HCI attempt standard processing. On the rx path, the driver is responsible to push incoming HCP frames to HCI using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling This must be done from a context that can sleep. -SHDLC ------ +PHY Management +-------------- + +The physical link (i2c, ...) management is defined by the following struture: + +struct nfc_phy_ops { + int (*write)(void *dev_id, struct sk_buff *skb); + int (*enable)(void *dev_id); + void (*disable)(void *dev_id); +}; + +enable(): turn the phy on (power on), make it ready to transfer data +disable(): turn the phy off +write(): Send a data frame to the chip. Note that to enable higher +layers such as an llc to store the frame for re-emission, this function must +not alter the skb. It must also not return a positive result (return 0 for +success, negative for failure). + +Data coming from the chip shall be sent directly to nfc_hci_recv_frame(). + +LLC +--- + +Communication between the CPU and the chip often requires some link layer +protocol. Those are isolated as modules managed by the HCI layer. There are +currently two modules : nop (raw transfert) and shdlc. +A new llc must implement the following functions: + +struct nfc_llc_ops { + void *(*init) (struct nfc_hci_dev *hdev, xmit_to_drv_t xmit_to_drv, + rcv_to_hci_t rcv_to_hci, int tx_headroom, + int tx_tailroom, int *rx_headroom, int *rx_tailroom, + llc_failure_t llc_failure); + void (*deinit) (struct nfc_llc *llc); + int (*start) (struct nfc_llc *llc); + int (*stop) (struct nfc_llc *llc); + void (*rcv_from_drv) (struct nfc_llc *llc, struct sk_buff *skb); + int (*xmit_from_hci) (struct nfc_llc *llc, struct sk_buff *skb); +}; + +- init() : allocate and init your private storage +- deinit() : cleanup +- start() : establish the logical connection +- stop () : terminate the logical connection +- rcv_from_drv() : handle data coming from the chip, going to HCI +- xmit_from_hci() : handle data sent by HCI, going to the chip -Most chips use shdlc to ensure integrity and delivery ordering of the HCP -frames between the host controller (the chip) and hosts (entities connected -to the chip, like the cpu). In order to simplify writing the driver, an shdlc -layer is available for use by the driver. -When used, the driver actually registers with shdlc, and shdlc will register -with HCI. HCI sees shdlc as the driver and thus send its HCP frames -through shdlc->xmit. -SHDLC adds a new execution context (nfc_shdlc_sm_work()) to run its state -machine and handle both its rx and tx path. +The llc must be registered with nfc before it can be used. Do that by +calling nfc_llc_register(const char *name, struct nfc_llc_ops *ops); + +Again, note that the llc does not handle the physical link. It is thus very +easy to mix any physical link with any llc for a given chip driver. Included Drivers ---------------- @@ -117,10 +183,12 @@ Execution Contexts The execution contexts are the following: - IRQ handler (IRQH): -fast, cannot sleep. stores incoming frames into an shdlc rx queue +fast, cannot sleep. sends incoming frames to HCI where they are passed to +the current llc. In case of shdlc, the frame is queued in shdlc rx queue. - SHDLC State Machine worker (SMW) -handles shdlc rx & tx queues. Dispatches HCI cmd responses. +Only when llc_shdlc is used: handles shdlc rx & tx queues. +Dispatches HCI cmd responses. - HCI Tx Cmd worker (MSGTXWQ) Serializes execution of HCI commands. Completes execution in case of response @@ -166,6 +234,15 @@ waiting command execution. Response processing involves invoking the completion callback that was provided by nfc_hci_msg_tx_work() when it sent the command. The completion callback will then wake the syscall context. +It is also possible to execute the command asynchronously using this API: + +static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd, + const u8 *param, size_t param_len, + data_exchange_cb_t cb, void *cb_context) + +The workflow is the same, except that the API call returns immediately, and +the callback will be called with the result from the SMW context. + Workflow receiving an HCI event or command ------------------------------------------ -- cgit v0.10.2 From 390a1bd8538132186ddb679cafe9e75b7ef7e2d2 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 19 Dec 2012 19:11:32 +0100 Subject: NFC: Initial Secure Element API Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index c7c182d..3b731ac 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -542,6 +542,7 @@ static int nfcwilink_probe(struct platform_device *pdev) drv->ndev = nci_allocate_device(&nfcwilink_ops, protocols, + NFC_SE_NONE, NFCWILINK_HDR_LEN, 0); if (!drv->ndev) { diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index e8c0832..31a5b3b 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -2525,6 +2525,7 @@ static int pn533_probe(struct usb_interface *interface, dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, + NFC_SE_NONE, dev->ops->tx_header_len + PN533_CMD_DATAEXCH_HEAD_LEN, dev->ops->tx_tail_len); diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index d108c79..9c5f16e 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -801,7 +801,7 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, struct nfc_hci_dev **hdev) { struct pn544_hci_info *info; - u32 protocols; + u32 protocols, se; struct nfc_hci_init_data init_data; int r; @@ -834,8 +834,10 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_NFC_DEP_MASK; + se = NFC_SE_UICC | NFC_SE_EMBEDDED; + info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0, - protocols, llc_name, + protocols, se, llc_name, phy_headroom + PN544_CMDS_HEADROOM, phy_tailroom, phy_payload); if (!info->hdev) { diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 2ff7175..b87a169 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -59,6 +59,8 @@ struct nfc_hci_ops { struct nfc_target *target); int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, struct sk_buff *skb); + int (*enable_se)(struct nfc_dev *dev, u32 secure_element); + int (*disable_se)(struct nfc_dev *dev, u32 secure_element); }; /* Pipes */ @@ -150,6 +152,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, unsigned long quirks, u32 protocols, + u32 supported_se, const char *llc_name, int tx_headroom, int tx_tailroom, diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h index d705d86..5bc0c46 100644 --- a/include/net/nfc/nci_core.h +++ b/include/net/nfc/nci_core.h @@ -147,6 +147,7 @@ struct nci_dev { /* ----- NCI Devices ----- */ struct nci_dev *nci_allocate_device(struct nci_ops *ops, __u32 supported_protocols, + __u32 supported_se, int tx_headroom, int tx_tailroom); void nci_free_device(struct nci_dev *ndev); diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 1665674..87a6417 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -68,6 +68,8 @@ struct nfc_ops { void *cb_context); int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb); int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target); + int (*enable_se)(struct nfc_dev *dev, u32 secure_element); + int (*disable_se)(struct nfc_dev *dev, u32 secure_element); }; #define NFC_TARGET_IDX_ANY -1 @@ -109,6 +111,9 @@ struct nfc_dev { struct nfc_genl_data genl_data; u32 supported_protocols; + u32 supported_se; + u32 active_se; + int tx_headroom; int tx_tailroom; @@ -125,6 +130,7 @@ extern struct class nfc_class; struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, u32 supported_protocols, + u32 supported_se, int tx_headroom, int tx_tailroom); diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 0e63cee..80e4ecd 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -67,6 +67,11 @@ * subsequent CONNECT and CC messages. * If one of the passed parameters is wrong none is set and -EINVAL is * returned. + * @NFC_CMD_ENABLE_SE: Enable the physical link to a specific secure element. + * Once enabled a secure element will handle card emulation mode, i.e. + * starting a poll from a device which has a secure element enabled means + * we want to do SE based card emulation. + * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -86,6 +91,8 @@ enum nfc_commands { NFC_EVENT_TM_DEACTIVATED, NFC_CMD_LLC_GET_PARAMS, NFC_CMD_LLC_SET_PARAMS, + NFC_CMD_ENABLE_SE, + NFC_CMD_DISABLE_SE, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -114,6 +121,7 @@ enum nfc_commands { * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter + * @NFC_ATTR_SE: Available Secure Elements */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -134,6 +142,7 @@ enum nfc_attrs { NFC_ATTR_LLC_PARAM_LTO, NFC_ATTR_LLC_PARAM_RW, NFC_ATTR_LLC_PARAM_MIUX, + NFC_ATTR_SE, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -172,6 +181,11 @@ enum nfc_attrs { #define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) +/* NFC Secure Elements */ +#define NFC_SE_NONE 0x0 +#define NFC_SE_UICC 0x1 +#define NFC_SE_EMBEDDED 0x2 + struct sockaddr_nfc { sa_family_t sa_family; __u32 dev_idx; diff --git a/net/nfc/core.c b/net/nfc/core.c index 7d7b4ee..25522e5 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -757,6 +757,7 @@ struct nfc_dev *nfc_get_device(unsigned int idx) */ struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, u32 supported_protocols, + u32 supported_se, int tx_headroom, int tx_tailroom) { struct nfc_dev *dev; @@ -774,6 +775,8 @@ struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, dev->ops = ops; dev->supported_protocols = supported_protocols; + dev->supported_se = supported_se; + dev->active_se = NFC_SE_NONE; dev->tx_headroom = tx_headroom; dev->tx_tailroom = tx_tailroom; diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index 755a6b9..91020b2 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -797,6 +797,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, unsigned long quirks, u32 protocols, + u32 supported_se, const char *llc_name, int tx_headroom, int tx_tailroom, @@ -822,7 +823,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, return NULL; } - hdev->ndev = nfc_allocate_device(&hci_nfc_ops, protocols, + hdev->ndev = nfc_allocate_device(&hci_nfc_ops, protocols, supported_se, tx_headroom + HCI_CMDS_HEADROOM, tx_tailroom); if (!hdev->ndev) { diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 5f98dc1..48ada0e 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -658,6 +658,7 @@ static struct nfc_ops nci_nfc_ops = { */ struct nci_dev *nci_allocate_device(struct nci_ops *ops, __u32 supported_protocols, + __u32 supported_se, int tx_headroom, int tx_tailroom) { struct nci_dev *ndev; @@ -680,6 +681,7 @@ struct nci_dev *nci_allocate_device(struct nci_ops *ops, ndev->nfc_dev = nfc_allocate_device(&nci_nfc_ops, supported_protocols, + supported_se, tx_headroom + NCI_DATA_HDR_SIZE, tx_tailroom); if (!ndev->nfc_dev) diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c index 3568ae1..504b883 100644 --- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -366,6 +366,7 @@ static int nfc_genl_send_device(struct sk_buff *msg, struct nfc_dev *dev, if (nla_put_string(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev)) || nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) || nla_put_u32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols) || + nla_put_u32(msg, NFC_ATTR_SE, dev->supported_se) || nla_put_u8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up) || nla_put_u8(msg, NFC_ATTR_RF_MODE, dev->rf_mode)) goto nla_put_failure; -- cgit v0.10.2 From 8a0ecfe74b3692258311d084d31613516828905f Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Fri, 21 Dec 2012 10:39:01 +0100 Subject: NFC: pn533: Fix missing parenthesis This is a quite critical patch as it fixes potential reference to undefined general_bytes which were never set correctly on target activation due to missing parenthesis. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 31a5b3b..f1702f9 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1724,9 +1724,10 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) rsp = (struct pn533_cmd_activate_response *)resp->data; rc = rsp->status & PN533_CMD_RET_MASK; - if (rc != PN533_CMD_RET_SUCCESS) + if (rc != PN533_CMD_RET_SUCCESS) { dev_kfree_skb(resp); return -EIO; + } /* ATR_RES general bytes are located at offset 16 */ gt_len = resp->len - 16; -- cgit v0.10.2 From 1353a10c474d1c6895051d33eefeb93542015008 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 10 Jan 2013 01:25:04 +0100 Subject: NFC: Update pn544 documentation The pn544 driver no longer has a /dev/pn544 interface nor a sysfs one. Reported-by: Marcel Holtmann Signed-off-by: Samuel Ortiz diff --git a/Documentation/nfc/nfc-pn544.txt b/Documentation/nfc/nfc-pn544.txt index 2fcac9f..b36ca14 100644 --- a/Documentation/nfc/nfc-pn544.txt +++ b/Documentation/nfc/nfc-pn544.txt @@ -1,32 +1,15 @@ Kernel driver for the NXP Semiconductors PN544 Near Field Communication chip -Author: Jari Vanhala -Contact: Matti Aaltonen (matti.j.aaltonen at nokia.com) - General ------- The PN544 is an integrated transmission module for contactless communication. The driver goes under drives/nfc/ and is compiled as a -module named "pn544". It registers a misc device and creates a device -file named "/dev/pn544". +module named "pn544". Host Interfaces: I2C, SPI and HSU, this driver supports currently only I2C. -The Interface -------------- - -The driver offers a sysfs interface for a hardware test and an IOCTL -interface for selecting between two operating modes. There are read, -write and poll functions for transferring messages. The two operating -modes are the normal (HCI) mode and the firmware update mode. - -PN544 is controlled by sending messages from the userspace to the -chip. The main function of the driver is just to pass those messages -without caring about the message content. - - Protocols --------- @@ -47,68 +30,3 @@ and third (LSB) bytes of the message. The maximum FW message length is For the ETSI HCI specification see http://www.etsi.org/WebSite/Technologies/ProtocolSpecification.aspx - -The Hardware Test ------------------ - -The idea of the test is that it can performed by reading from the -corresponding sysfs file. The test is implemented in the board file -and it should test that PN544 can be put into the firmware update -mode. If the test is not implemented the sysfs file does not get -created. - -Example: -> cat /sys/module/pn544/drivers/i2c\:pn544/3-002b/nfc_test -1 - -Normal Operation ----------------- - -PN544 is powered up when the device file is opened, otherwise it's -turned off. Only one instance can use the device at a time. - -Userspace applications control PN544 with HCI messages. The hardware -sends an interrupt when data is available for reading. Data is -physically read when the read function is called by a userspace -application. Poll() checks the read interrupt state. Configuration and -self testing are also done from the userspace using read and write. - -Example platform data: - -static int rx71_pn544_nfc_request_resources(struct i2c_client *client) -{ - /* Get and setup the HW resources for the device */ -} - -static void rx71_pn544_nfc_free_resources(void) -{ - /* Release the HW resources */ -} - -static void rx71_pn544_nfc_enable(int fw) -{ - /* Turn the device on */ -} - -static int rx71_pn544_nfc_test(void) -{ - /* - * Put the device into the FW update mode - * and then back to the normal mode. - * Check the behavior and return one on success, - * zero on failure. - */ -} - -static void rx71_pn544_nfc_disable(void) -{ - /* turn the power off */ -} - -static struct pn544_nfc_platform_data rx71_nfc_data = { - .request_resources = rx71_pn544_nfc_request_resources, - .free_resources = rx71_pn544_nfc_free_resources, - .enable = rx71_pn544_nfc_enable, - .test = rx71_pn544_nfc_test, - .disable = rx71_pn544_nfc_disable, -}; -- cgit v0.10.2 From dd4544f05469aaaeee891d7dc54d66430344321e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 8 Jan 2013 20:06:23 +0000 Subject: bgmac: driver for GBit MAC core on BCMA bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA based SoCs have gigabit ethernet provided by the GBit MAC core. This patch adds driver for such a cores registering itself as a netdev. It has been tested on a BCM4706 and BCM4718 chipsets. In the kernel tree there is already b44 driver which has some common things with bgmac, however there are many differences that has led to the decision or writing a new driver: 1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44) 2) There is 64bit DMA engine which differs from 32bit one 3) There is no CAM (Content Addressable Memory) in GBit MAC 4) We have 4 TX queues on GBit MAC devices (instead of 1) 5) Many registers have different addresses/values 6) RX header flags are also different The driver in it's state is functional how, however there is of course place for improvements: 1) Supporting more net_device_ops 2) SUpporting more ethtool_ops 3) Unaligned addressing in DMA 4) Writing separated PHY driver Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c index c62c788..932b101 100644 --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -264,7 +264,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m) } /* query bus clock frequency for PMU-enabled chipcommon */ -static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) +u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; @@ -293,6 +293,7 @@ static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) } return BCMA_CC_PMU_HT_CLOCK; } +EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock); /* query cpu clock frequency for PMU-enabled chipcommon */ u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc) diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 3b3bf0d..3e69b3f 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -130,4 +130,13 @@ config BNX2X_SRIOV Virtualization support in the 578xx and 57712 products. This allows for virtual function acceleration in virtual environments. +config BGMAC + tristate "BCMA bus GBit core support" + depends on BCMA_HOST_SOC && HAS_DMA + ---help--- + This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. + They can be found on BCM47xx SoCs and provide gigabit ethernet. + In case of using this driver on BCM4706 it's also requires to enable + BCMA_DRIVER_GMAC_CMN to make it work. + endif # NET_VENDOR_BROADCOM diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile index b789605..68efa1a 100644 --- a/drivers/net/ethernet/broadcom/Makefile +++ b/drivers/net/ethernet/broadcom/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o obj-$(CONFIG_BNX2X) += bnx2x/ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o obj-$(CONFIG_TIGON3) += tg3.o +obj-$(CONFIG_BGMAC) += bgmac.o diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c new file mode 100644 index 0000000..9bd33db --- /dev/null +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -0,0 +1,1422 @@ +/* + * Driver for (BCM4706)? GBit MAC core on BCMA bus. + * + * Copyright (C) 2012 Rafał Miłecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bgmac.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct bcma_device_id bgmac_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); + +static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, + u32 value, int timeout) +{ + u32 val; + int i; + + for (i = 0; i < timeout / 10; i++) { + val = bcma_read32(core, reg); + if ((val & mask) == value) + return true; + udelay(10); + } + pr_err("Timeout waiting for reg 0x%X\n", reg); + return false; +} + +/************************************************** + * DMA + **************************************************/ + +static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) +{ + u32 val; + int i; + + if (!ring->mmio_base) + return; + + /* Suspend DMA TX ring first. + * bgmac_wait_value doesn't support waiting for any of few values, so + * implement whole loop here. + */ + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, + BGMAC_DMA_TX_SUSPEND); + for (i = 0; i < 10000 / 10; i++) { + val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); + val &= BGMAC_DMA_TX_STAT; + if (val == BGMAC_DMA_TX_STAT_DISABLED || + val == BGMAC_DMA_TX_STAT_IDLEWAIT || + val == BGMAC_DMA_TX_STAT_STOPPED) { + i = 0; + break; + } + udelay(10); + } + if (i) + bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", + ring->mmio_base, val); + + /* Remove SUSPEND bit */ + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); + if (!bgmac_wait_value(bgmac->core, + ring->mmio_base + BGMAC_DMA_TX_STATUS, + BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, + 10000)) { + bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", + ring->mmio_base); + udelay(300); + val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); + if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED) + bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", + ring->mmio_base); + } +} + +static void bgmac_dma_tx_enable(struct bgmac *bgmac, + struct bgmac_dma_ring *ring) +{ + u32 ctl; + + ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL); + ctl |= BGMAC_DMA_TX_ENABLE; + ctl |= BGMAC_DMA_TX_PARITY_DISABLE; + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl); +} + +static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac, + struct bgmac_dma_ring *ring, + struct sk_buff *skb) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct net_device *net_dev = bgmac->net_dev; + struct bgmac_dma_desc *dma_desc; + struct bgmac_slot_info *slot; + u32 ctl0, ctl1; + int free_slots; + + if (skb->len > BGMAC_DESC_CTL1_LEN) { + bgmac_err(bgmac, "Too long skb (%d)\n", skb->len); + goto err_stop_drop; + } + + if (ring->start <= ring->end) + free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS; + else + free_slots = ring->start - ring->end; + if (free_slots == 1) { + bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n"); + netif_stop_queue(net_dev); + return NETDEV_TX_BUSY; + } + + slot = &ring->slots[ring->end]; + slot->skb = skb; + slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, + DMA_TO_DEVICE); + if (dma_mapping_error(dma_dev, slot->dma_addr)) { + bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", + ring->mmio_base); + goto err_stop_drop; + } + + ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF; + if (ring->end == ring->num_slots - 1) + ctl0 |= BGMAC_DESC_CTL0_EOT; + ctl1 = skb->len & BGMAC_DESC_CTL1_LEN; + + dma_desc = ring->cpu_base; + dma_desc += ring->end; + dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr)); + dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr)); + dma_desc->ctl0 = cpu_to_le32(ctl0); + dma_desc->ctl1 = cpu_to_le32(ctl1); + + wmb(); + + /* Increase ring->end to point empty slot. We tell hardware the first + * slot it should *not* read. + */ + if (++ring->end >= BGMAC_TX_RING_SLOTS) + ring->end = 0; + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX, + ring->end * sizeof(struct bgmac_dma_desc)); + + /* Always keep one slot free to allow detecting bugged calls. */ + if (--free_slots == 1) + netif_stop_queue(net_dev); + + return NETDEV_TX_OK; + +err_stop_drop: + netif_stop_queue(net_dev); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* Free transmitted packets */ +static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) +{ + struct device *dma_dev = bgmac->core->dma_dev; + int empty_slot; + bool freed = false; + + /* The last slot that hardware didn't consume yet */ + empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); + empty_slot &= BGMAC_DMA_TX_STATDPTR; + empty_slot /= sizeof(struct bgmac_dma_desc); + + while (ring->start != empty_slot) { + struct bgmac_slot_info *slot = &ring->slots[ring->start]; + + if (slot->skb) { + /* Unmap no longer used buffer */ + dma_unmap_single(dma_dev, slot->dma_addr, + slot->skb->len, DMA_TO_DEVICE); + slot->dma_addr = 0; + + /* Free memory! :) */ + dev_kfree_skb(slot->skb); + slot->skb = NULL; + } else { + bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n", + ring->start, ring->end); + } + + if (++ring->start >= BGMAC_TX_RING_SLOTS) + ring->start = 0; + freed = true; + } + + if (freed && netif_queue_stopped(bgmac->net_dev)) + netif_wake_queue(bgmac->net_dev); +} + +static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) +{ + if (!ring->mmio_base) + return; + + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0); + if (!bgmac_wait_value(bgmac->core, + ring->mmio_base + BGMAC_DMA_RX_STATUS, + BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, + 10000)) + bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", + ring->mmio_base); +} + +static void bgmac_dma_rx_enable(struct bgmac *bgmac, + struct bgmac_dma_ring *ring) +{ + u32 ctl; + + ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); + ctl &= BGMAC_DMA_RX_ADDREXT_MASK; + ctl |= BGMAC_DMA_RX_ENABLE; + ctl |= BGMAC_DMA_RX_PARITY_DISABLE; + ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; + ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT; + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl); +} + +static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, + struct bgmac_slot_info *slot) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_rx_header *rx; + + /* Alloc skb */ + slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); + if (!slot->skb) { + bgmac_err(bgmac, "Allocation of skb failed!\n"); + return -ENOMEM; + } + + /* Poison - if everything goes fine, hardware will overwrite it */ + rx = (struct bgmac_rx_header *)slot->skb->data; + rx->len = cpu_to_le16(0xdead); + rx->flags = cpu_to_le16(0xbeef); + + /* Map skb for the DMA */ + slot->dma_addr = dma_map_single(dma_dev, slot->skb->data, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dma_dev, slot->dma_addr)) { + bgmac_err(bgmac, "DMA mapping error\n"); + return -ENOMEM; + } + if (slot->dma_addr & 0xC0000000) + bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); + + return 0; +} + +static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, + int weight) +{ + u32 end_slot; + int handled = 0; + + end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS); + end_slot &= BGMAC_DMA_RX_STATDPTR; + end_slot /= sizeof(struct bgmac_dma_desc); + + ring->end = end_slot; + + while (ring->start != ring->end) { + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_slot_info *slot = &ring->slots[ring->start]; + struct sk_buff *skb = slot->skb; + struct sk_buff *new_skb; + struct bgmac_rx_header *rx; + u16 len, flags; + + /* Unmap buffer to make it accessible to the CPU */ + dma_sync_single_for_cpu(dma_dev, slot->dma_addr, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + + /* Get info from the header */ + rx = (struct bgmac_rx_header *)skb->data; + len = le16_to_cpu(rx->len); + flags = le16_to_cpu(rx->flags); + + /* Check for poison and drop or pass the packet */ + if (len == 0xdead && flags == 0xbeef) { + bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", + ring->start); + } else { + new_skb = netdev_alloc_skb(bgmac->net_dev, len); + if (new_skb) { + skb_put(new_skb, len); + skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, + new_skb->data, + len); + new_skb->protocol = + eth_type_trans(new_skb, bgmac->net_dev); + netif_receive_skb(new_skb); + handled++; + } else { + bgmac->net_dev->stats.rx_dropped++; + bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n"); + } + + /* Poison the old skb */ + rx->len = cpu_to_le16(0xdead); + rx->flags = cpu_to_le16(0xbeef); + } + + /* Make it back accessible to the hardware */ + dma_sync_single_for_device(dma_dev, slot->dma_addr, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + + if (++ring->start >= BGMAC_RX_RING_SLOTS) + ring->start = 0; + + if (handled >= weight) /* Should never be greater */ + break; + } + + return handled; +} + +/* Does ring support unaligned addressing? */ +static bool bgmac_dma_unaligned(struct bgmac *bgmac, + struct bgmac_dma_ring *ring, + enum bgmac_dma_ring_type ring_type) +{ + switch (ring_type) { + case BGMAC_DMA_RING_TX: + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, + 0xff0); + if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO)) + return true; + break; + case BGMAC_DMA_RING_RX: + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, + 0xff0); + if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO)) + return true; + break; + } + return false; +} + +static void bgmac_dma_ring_free(struct bgmac *bgmac, + struct bgmac_dma_ring *ring) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_slot_info *slot; + int size; + int i; + + for (i = 0; i < ring->num_slots; i++) { + slot = &ring->slots[i]; + if (slot->skb) { + if (slot->dma_addr) + dma_unmap_single(dma_dev, slot->dma_addr, + slot->skb->len, DMA_TO_DEVICE); + dev_kfree_skb(slot->skb); + } + } + + if (ring->cpu_base) { + /* Free ring of descriptors */ + size = ring->num_slots * sizeof(struct bgmac_dma_desc); + dma_free_coherent(dma_dev, size, ring->cpu_base, + ring->dma_base); + } +} + +static void bgmac_dma_free(struct bgmac *bgmac) +{ + int i; + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) + bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]); + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) + bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]); +} + +static int bgmac_dma_alloc(struct bgmac *bgmac) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_dma_ring *ring; + static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, + BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, }; + int size; /* ring size: different for Tx and Rx */ + int err; + int i; + + BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base)); + BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); + + if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { + bgmac_err(bgmac, "Core does not report 64-bit DMA\n"); + return -ENOTSUPP; + } + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { + ring = &bgmac->tx_ring[i]; + ring->num_slots = BGMAC_TX_RING_SLOTS; + ring->mmio_base = ring_base[i]; + if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX)) + bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", + ring->mmio_base); + + /* Alloc ring of descriptors */ + size = ring->num_slots * sizeof(struct bgmac_dma_desc); + ring->cpu_base = dma_zalloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); + if (!ring->cpu_base) { + bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n", + ring->mmio_base); + goto err_dma_free; + } + if (ring->dma_base & 0xC0000000) + bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); + + /* No need to alloc TX slots yet */ + } + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; + ring->num_slots = BGMAC_RX_RING_SLOTS; + ring->mmio_base = ring_base[i]; + if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX)) + bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", + ring->mmio_base); + + /* Alloc ring of descriptors */ + size = ring->num_slots * sizeof(struct bgmac_dma_desc); + ring->cpu_base = dma_zalloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); + if (!ring->cpu_base) { + bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n", + ring->mmio_base); + err = -ENOMEM; + goto err_dma_free; + } + if (ring->dma_base & 0xC0000000) + bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); + + /* Alloc RX slots */ + for (i = 0; i < ring->num_slots; i++) { + err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]); + if (err) { + bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n"); + goto err_dma_free; + } + } + } + + return 0; + +err_dma_free: + bgmac_dma_free(bgmac); + return -ENOMEM; +} + +static void bgmac_dma_init(struct bgmac *bgmac) +{ + struct bgmac_dma_ring *ring; + struct bgmac_dma_desc *dma_desc; + u32 ctl0, ctl1; + int i; + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { + ring = &bgmac->tx_ring[i]; + + /* We don't implement unaligned addressing, so enable first */ + bgmac_dma_tx_enable(bgmac, ring); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, + lower_32_bits(ring->dma_base)); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI, + upper_32_bits(ring->dma_base)); + + ring->start = 0; + ring->end = 0; /* Points the slot that should *not* be read */ + } + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; + + /* We don't implement unaligned addressing, so enable first */ + bgmac_dma_rx_enable(bgmac, ring); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, + lower_32_bits(ring->dma_base)); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI, + upper_32_bits(ring->dma_base)); + + for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots; + i++, dma_desc++) { + ctl0 = ctl1 = 0; + + if (i == ring->num_slots - 1) + ctl0 |= BGMAC_DESC_CTL0_EOT; + ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN; + /* Is there any BGMAC device that requires extension? */ + /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) & + * B43_DMA64_DCTL1_ADDREXT_MASK; + */ + + dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr)); + dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr)); + dma_desc->ctl0 = cpu_to_le32(ctl0); + dma_desc->ctl1 = cpu_to_le32(ctl1); + } + + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, + ring->num_slots * sizeof(struct bgmac_dma_desc)); + + ring->start = 0; + ring->end = 0; + } +} + +/************************************************** + * PHY ops + **************************************************/ + +u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) +{ + struct bcma_device *core; + u16 phy_access_addr; + u16 phy_ctl_addr; + u32 tmp; + + BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); + BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); + BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); + BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); + BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); + BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); + BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); + BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); + BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); + BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); + BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); + + if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { + core = bgmac->core->bus->drv_gmac_cmn.core; + phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; + phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; + } else { + core = bgmac->core; + phy_access_addr = BGMAC_PHY_ACCESS; + phy_ctl_addr = BGMAC_PHY_CNTL; + } + + tmp = bcma_read32(core, phy_ctl_addr); + tmp &= ~BGMAC_PC_EPA_MASK; + tmp |= phyaddr; + bcma_write32(core, phy_ctl_addr, tmp); + + tmp = BGMAC_PA_START; + tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; + tmp |= reg << BGMAC_PA_REG_SHIFT; + bcma_write32(core, phy_access_addr, tmp); + + if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { + bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n", + phyaddr, reg); + return 0xffff; + } + + return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ +void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) +{ + struct bcma_device *core; + u16 phy_access_addr; + u16 phy_ctl_addr; + u32 tmp; + + if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { + core = bgmac->core->bus->drv_gmac_cmn.core; + phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; + phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; + } else { + core = bgmac->core; + phy_access_addr = BGMAC_PHY_ACCESS; + phy_ctl_addr = BGMAC_PHY_CNTL; + } + + tmp = bcma_read32(core, phy_ctl_addr); + tmp &= ~BGMAC_PC_EPA_MASK; + tmp |= phyaddr; + bcma_write32(core, phy_ctl_addr, tmp); + + bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); + if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) + bgmac_warn(bgmac, "Error setting MDIO int\n"); + + tmp = BGMAC_PA_START; + tmp |= BGMAC_PA_WRITE; + tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; + tmp |= reg << BGMAC_PA_REG_SHIFT; + tmp |= value; + bcma_write32(core, phy_access_addr, tmp); + + if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) + bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", + phyaddr, reg); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ +static void bgmac_phy_force(struct bgmac *bgmac) +{ + u16 ctl; + u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB | + BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX); + + if (bgmac->phyaddr == BGMAC_PHY_NOREGS) + return; + + if (bgmac->autoneg) + return; + + ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL); + ctl &= mask; + if (bgmac->full_duplex) + ctl |= BGMAC_PHY_CTL_DUPLEX; + if (bgmac->speed == BGMAC_SPEED_100) + ctl |= BGMAC_PHY_CTL_SPEED_100; + else if (bgmac->speed == BGMAC_SPEED_1000) + ctl |= BGMAC_PHY_CTL_SPEED_1000; + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */ +static void bgmac_phy_advertise(struct bgmac *bgmac) +{ + u16 adv; + + if (bgmac->phyaddr == BGMAC_PHY_NOREGS) + return; + + if (!bgmac->autoneg) + return; + + /* Adv selected 10/100 speeds */ + adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV); + adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL | + BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL); + if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) + adv |= BGMAC_PHY_ADV_10HALF; + if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) + adv |= BGMAC_PHY_ADV_100HALF; + if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) + adv |= BGMAC_PHY_ADV_10FULL; + if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) + adv |= BGMAC_PHY_ADV_100FULL; + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv); + + /* Adv selected 1000 speeds */ + adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2); + adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL); + if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) + adv |= BGMAC_PHY_ADV2_1000HALF; + if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) + adv |= BGMAC_PHY_ADV2_1000FULL; + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv); + + /* Restart */ + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, + bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) | + BGMAC_PHY_CTL_RESTART); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ +static void bgmac_phy_init(struct bgmac *bgmac) +{ + struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; + struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; + u8 i; + + if (ci->id == BCMA_CHIP_ID_BCM5356) { + for (i = 0; i < 5; i++) { + bgmac_phy_write(bgmac, i, 0x1f, 0x008b); + bgmac_phy_write(bgmac, i, 0x15, 0x0100); + bgmac_phy_write(bgmac, i, 0x1f, 0x000f); + bgmac_phy_write(bgmac, i, 0x12, 0x2aaa); + bgmac_phy_write(bgmac, i, 0x1f, 0x000b); + } + } + if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || + (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || + (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { + bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); + bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); + for (i = 0; i < 5; i++) { + bgmac_phy_write(bgmac, i, 0x1f, 0x000f); + bgmac_phy_write(bgmac, i, 0x16, 0x5284); + bgmac_phy_write(bgmac, i, 0x1f, 0x000b); + bgmac_phy_write(bgmac, i, 0x17, 0x0010); + bgmac_phy_write(bgmac, i, 0x1f, 0x000f); + bgmac_phy_write(bgmac, i, 0x16, 0x5296); + bgmac_phy_write(bgmac, i, 0x17, 0x1073); + bgmac_phy_write(bgmac, i, 0x17, 0x9073); + bgmac_phy_write(bgmac, i, 0x16, 0x52b6); + bgmac_phy_write(bgmac, i, 0x17, 0x9273); + bgmac_phy_write(bgmac, i, 0x1f, 0x000b); + } + } +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ +static void bgmac_phy_reset(struct bgmac *bgmac) +{ + if (bgmac->phyaddr == BGMAC_PHY_NOREGS) + return; + + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, + BGMAC_PHY_CTL_RESET); + udelay(100); + if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) & + BGMAC_PHY_CTL_RESET) + bgmac_err(bgmac, "PHY reset failed\n"); + bgmac_phy_init(bgmac); +} + +/************************************************** + * Chip ops + **************************************************/ + +/* TODO: can we just drop @force? Can we don't reset MAC at all if there is + * nothing to change? Try if after stabilizng driver. + */ +static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, + bool force) +{ + u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); + u32 new_val = (cmdcfg & mask) | set; + + bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR); + udelay(2); + + if (new_val != cmdcfg || force) + bgmac_write(bgmac, BGMAC_CMDCFG, new_val); + + bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR); + udelay(2); +} + +#if 0 /* We don't use that regs yet */ +static void bgmac_chip_stats_update(struct bgmac *bgmac) +{ + int i; + + if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) { + for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) + bgmac->mib_tx_regs[i] = + bgmac_read(bgmac, + BGMAC_TX_GOOD_OCTETS + (i * 4)); + for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) + bgmac->mib_rx_regs[i] = + bgmac_read(bgmac, + BGMAC_RX_GOOD_OCTETS + (i * 4)); + } + + /* TODO: what else? how to handle BCM4706? Specs are needed */ +} +#endif + +static void bgmac_clear_mib(struct bgmac *bgmac) +{ + int i; + + if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) + return; + + bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR); + for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) + bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4)); + for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) + bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4)); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ +static void bgmac_speed(struct bgmac *bgmac, int speed) +{ + u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD); + u32 set = 0; + + if (speed & BGMAC_SPEED_10) + set |= BGMAC_CMDCFG_ES_10; + if (speed & BGMAC_SPEED_100) + set |= BGMAC_CMDCFG_ES_100; + if (speed & BGMAC_SPEED_1000) + set |= BGMAC_CMDCFG_ES_1000; + if (!bgmac->full_duplex) + set |= BGMAC_CMDCFG_HD; + bgmac_cmdcfg_maskset(bgmac, mask, set, true); +} + +static void bgmac_miiconfig(struct bgmac *bgmac) +{ + u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> + BGMAC_DS_MM_SHIFT; + if (imode == 0 || imode == 1) { + if (bgmac->autoneg) + bgmac_speed(bgmac, BGMAC_SPEED_100); + else + bgmac_speed(bgmac, bgmac->speed); + } +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ +static void bgmac_chip_reset(struct bgmac *bgmac) +{ + struct bcma_device *core = bgmac->core; + struct bcma_bus *bus = core->bus; + struct bcma_chipinfo *ci = &bus->chipinfo; + u32 flags = 0; + u32 iost; + int i; + + if (bcma_core_is_enabled(core)) { + if (!bgmac->stats_grabbed) { + /* bgmac_chip_stats_update(bgmac); */ + bgmac->stats_grabbed = true; + } + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) + bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]); + + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); + udelay(1); + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) + bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]); + + /* TODO: Clear software multicast filter list */ + } + + iost = bcma_aread32(core, BCMA_IOST); + if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) || + (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || + (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) + iost &= ~BGMAC_BCMA_IOST_ATTACHED; + + if (iost & BGMAC_BCMA_IOST_ATTACHED) { + flags = BGMAC_BCMA_IOCTL_SW_CLKEN; + if (!bgmac->has_robosw) + flags |= BGMAC_BCMA_IOCTL_SW_RESET; + } + + bcma_core_enable(core, flags); + + if (core->id.rev > 2) { + bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8); + bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24, + 1000); + } + + if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 || + ci->id == BCMA_CHIP_ID_BCM53572) { + struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; + u8 et_swtype = 0; + u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | + BGMAC_CHIPCTL_1_IF_TYPE_RMII; + char buf[2]; + + if (nvram_getenv("et_swtype", buf, 1) > 0) { + if (kstrtou8(buf, 0, &et_swtype)) + bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", + buf); + et_swtype &= 0x0f; + et_swtype <<= 4; + sw_type = et_swtype; + } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { + sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; + } else if (0) { + /* TODO */ + } + bcma_chipco_chipctl_maskset(cc, 1, + ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | + BGMAC_CHIPCTL_1_SW_TYPE_MASK), + sw_type); + } + + if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) + bcma_awrite32(core, BCMA_IOCTL, + bcma_aread32(core, BCMA_IOCTL) & + ~BGMAC_BCMA_IOCTL_SW_RESET); + + /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset + * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine + * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to + * be keps until taking MAC out of the reset. + */ + bgmac_cmdcfg_maskset(bgmac, + ~(BGMAC_CMDCFG_TE | + BGMAC_CMDCFG_RE | + BGMAC_CMDCFG_RPI | + BGMAC_CMDCFG_TAI | + BGMAC_CMDCFG_HD | + BGMAC_CMDCFG_ML | + BGMAC_CMDCFG_CFE | + BGMAC_CMDCFG_RL | + BGMAC_CMDCFG_RED | + BGMAC_CMDCFG_PE | + BGMAC_CMDCFG_TPI | + BGMAC_CMDCFG_PAD_EN | + BGMAC_CMDCFG_PF), + BGMAC_CMDCFG_PROM | + BGMAC_CMDCFG_NLC | + BGMAC_CMDCFG_CFE | + BGMAC_CMDCFG_SR, + false); + + bgmac_clear_mib(bgmac); + if (core->id.id == BCMA_CORE_4706_MAC_GBIT) + bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, + BCMA_GMAC_CMN_PC_MTE); + else + bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); + bgmac_miiconfig(bgmac); + bgmac_phy_init(bgmac); + + bgmac->int_status = 0; +} + +static void bgmac_chip_intrs_on(struct bgmac *bgmac) +{ + bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask); +} + +static void bgmac_chip_intrs_off(struct bgmac *bgmac) +{ + bgmac_write(bgmac, BGMAC_INT_MASK, 0); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ +static void bgmac_enable(struct bgmac *bgmac) +{ + struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; + u32 cmdcfg; + u32 mode; + u32 rxq_ctl; + u32 fl_ctl; + u16 bp_clk; + u8 mdp; + + cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); + bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), + BGMAC_CMDCFG_SR, true); + udelay(2); + cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; + bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); + + mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> + BGMAC_DS_MM_SHIFT; + if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0) + bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); + if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2) + bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, + BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); + + switch (ci->id) { + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM4749: + case BCMA_CHIP_ID_BCM53572: + case BCMA_CHIP_ID_BCM4716: + case BCMA_CHIP_ID_BCM47162: + fl_ctl = 0x03cb04cb; + if (ci->id == BCMA_CHIP_ID_BCM5357 || + ci->id == BCMA_CHIP_ID_BCM4749 || + ci->id == BCMA_CHIP_ID_BCM53572) + fl_ctl = 0x2300e1; + bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); + bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); + break; + } + + rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); + rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; + bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000; + mdp = (bp_clk * 128 / 1000) - 3; + rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT); + bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */ +static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) +{ + struct bgmac_dma_ring *ring; + u8 *mac = bgmac->net_dev->dev_addr; + u32 tmp; + int i; + + /* 1 interrupt per received frame */ + bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); + + /* Enable 802.3x tx flow control (honor received PAUSE frames) */ + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); + + if (bgmac->net_dev->flags & IFF_PROMISC) + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); + else + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); + + /* Set MAC addr */ + tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; + bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); + tmp = (mac[4] << 8) | mac[5]; + bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); + + if (bgmac->loopback) + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); + else + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true); + + bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); + + if (!bgmac->autoneg) { + bgmac_speed(bgmac, bgmac->speed); + bgmac_phy_force(bgmac); + } else if (bgmac->speed) { /* if there is anything to adv */ + bgmac_phy_advertise(bgmac); + } + + if (full_init) { + bgmac_dma_init(bgmac); + if (1) /* FIXME: is there any case we don't want IRQs? */ + bgmac_chip_intrs_on(bgmac); + } else { + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; + bgmac_dma_rx_enable(bgmac, ring); + } + } + + bgmac_enable(bgmac); +} + +static irqreturn_t bgmac_interrupt(int irq, void *dev_id) +{ + struct bgmac *bgmac = netdev_priv(dev_id); + + u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS); + int_status &= bgmac->int_mask; + + if (!int_status) + return IRQ_NONE; + + /* Ack */ + bgmac_write(bgmac, BGMAC_INT_STATUS, int_status); + + /* Disable new interrupts until handling existing ones */ + bgmac_chip_intrs_off(bgmac); + + bgmac->int_status = int_status; + + napi_schedule(&bgmac->napi); + + return IRQ_HANDLED; +} + +static int bgmac_poll(struct napi_struct *napi, int weight) +{ + struct bgmac *bgmac = container_of(napi, struct bgmac, napi); + struct bgmac_dma_ring *ring; + int handled = 0; + + if (bgmac->int_status & BGMAC_IS_TX0) { + ring = &bgmac->tx_ring[0]; + bgmac_dma_tx_free(bgmac, ring); + bgmac->int_status &= ~BGMAC_IS_TX0; + } + + if (bgmac->int_status & BGMAC_IS_RX) { + ring = &bgmac->rx_ring[0]; + handled += bgmac_dma_rx_read(bgmac, ring, weight); + bgmac->int_status &= ~BGMAC_IS_RX; + } + + if (bgmac->int_status) { + bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status); + bgmac->int_status = 0; + } + + if (handled < weight) + napi_complete(napi); + + bgmac_chip_intrs_on(bgmac); + + return handled; +} + +/************************************************** + * net_device_ops + **************************************************/ + +static int bgmac_open(struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + int err = 0; + + bgmac_chip_reset(bgmac); + /* Specs say about reclaiming rings here, but we do that in DMA init */ + bgmac_chip_init(bgmac, true); + + err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, + KBUILD_MODNAME, net_dev); + if (err < 0) { + bgmac_err(bgmac, "IRQ request error: %d!\n", err); + goto err_out; + } + napi_enable(&bgmac->napi); + + netif_carrier_on(net_dev); + +err_out: + return err; +} + +static int bgmac_stop(struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + netif_carrier_off(net_dev); + + napi_disable(&bgmac->napi); + bgmac_chip_intrs_off(bgmac); + free_irq(bgmac->core->irq, net_dev); + + bgmac_chip_reset(bgmac); + + return 0; +} + +static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb, + struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + struct bgmac_dma_ring *ring; + + /* No QOS support yet */ + ring = &bgmac->tx_ring[0]; + return bgmac_dma_tx_add(bgmac, ring, skb); +} + +static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + struct mii_ioctl_data *data = if_mii(ifr); + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = bgmac->phyaddr; + /* fallthru */ + case SIOCGMIIREG: + if (!netif_running(net_dev)) + return -EAGAIN; + data->val_out = bgmac_phy_read(bgmac, data->phy_id, + data->reg_num & 0x1f); + return 0; + case SIOCSMIIREG: + if (!netif_running(net_dev)) + return -EAGAIN; + bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f, + data->val_in); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static const struct net_device_ops bgmac_netdev_ops = { + .ndo_open = bgmac_open, + .ndo_stop = bgmac_stop, + .ndo_start_xmit = bgmac_start_xmit, + .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */ + .ndo_do_ioctl = bgmac_ioctl, +}; + +/************************************************** + * ethtool_ops + **************************************************/ + +static int bgmac_get_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + cmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg; + + if (bgmac->autoneg) { + WARN_ON(cmd->advertising); + if (bgmac->full_duplex) { + if (bgmac->speed & BGMAC_SPEED_10) + cmd->advertising |= ADVERTISED_10baseT_Full; + if (bgmac->speed & BGMAC_SPEED_100) + cmd->advertising |= ADVERTISED_100baseT_Full; + if (bgmac->speed & BGMAC_SPEED_1000) + cmd->advertising |= ADVERTISED_1000baseT_Full; + } else { + if (bgmac->speed & BGMAC_SPEED_10) + cmd->advertising |= ADVERTISED_10baseT_Half; + if (bgmac->speed & BGMAC_SPEED_100) + cmd->advertising |= ADVERTISED_100baseT_Half; + if (bgmac->speed & BGMAC_SPEED_1000) + cmd->advertising |= ADVERTISED_1000baseT_Half; + } + } else { + switch (bgmac->speed) { + case BGMAC_SPEED_10: + ethtool_cmd_speed_set(cmd, SPEED_10); + break; + case BGMAC_SPEED_100: + ethtool_cmd_speed_set(cmd, SPEED_100); + break; + case BGMAC_SPEED_1000: + ethtool_cmd_speed_set(cmd, SPEED_1000); + break; + } + } + + cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + + cmd->autoneg = bgmac->autoneg; + + return 0; +} + +#if 0 +static int bgmac_set_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + return -1; +} +#endif + +static void bgmac_get_drvinfo(struct net_device *net_dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info)); +} + +static const struct ethtool_ops bgmac_ethtool_ops = { + .get_settings = bgmac_get_settings, + .get_drvinfo = bgmac_get_drvinfo, +}; + +/************************************************** + * BCMA bus ops + **************************************************/ + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ +static int bgmac_probe(struct bcma_device *core) +{ + struct net_device *net_dev; + struct bgmac *bgmac; + struct ssb_sprom *sprom = &core->bus->sprom; + u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; + int err; + + /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ + if (core->core_unit > 1) { + pr_err("Unsupported core_unit %d\n", core->core_unit); + return -ENOTSUPP; + } + + /* Allocation and references */ + net_dev = alloc_etherdev(sizeof(*bgmac)); + if (!net_dev) + return -ENOMEM; + net_dev->netdev_ops = &bgmac_netdev_ops; + net_dev->irq = core->irq; + SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops); + bgmac = netdev_priv(net_dev); + bgmac->net_dev = net_dev; + bgmac->core = core; + bcma_set_drvdata(core, bgmac); + + /* Defaults */ + bgmac->autoneg = true; + bgmac->full_duplex = true; + bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000; + memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); + + /* On BCM4706 we need common core to access PHY */ + if (core->id.id == BCMA_CORE_4706_MAC_GBIT && + !core->bus->drv_gmac_cmn.core) { + bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n"); + err = -ENODEV; + goto err_netdev_free; + } + bgmac->cmn = core->bus->drv_gmac_cmn.core; + + bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : + sprom->et0phyaddr; + bgmac->phyaddr &= BGMAC_PHY_MASK; + if (bgmac->phyaddr == BGMAC_PHY_MASK) { + bgmac_err(bgmac, "No PHY found\n"); + err = -ENODEV; + goto err_netdev_free; + } + bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr, + bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); + + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { + bgmac_err(bgmac, "PCI setup not implemented\n"); + err = -ENOTSUPP; + goto err_netdev_free; + } + + bgmac_chip_reset(bgmac); + + err = bgmac_dma_alloc(bgmac); + if (err) { + bgmac_err(bgmac, "Unable to alloc memory for DMA\n"); + goto err_netdev_free; + } + + bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; + if (nvram_getenv("et0_no_txint", NULL, 0) == 0) + bgmac->int_mask &= ~BGMAC_IS_TX_MASK; + + /* TODO: reset the external phy. Specs are needed */ + bgmac_phy_reset(bgmac); + + bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & + BGMAC_BFL_ENETROBO); + if (bgmac->has_robosw) + bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); + + if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) + bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n"); + + err = register_netdev(bgmac->net_dev); + if (err) { + bgmac_err(bgmac, "Cannot register net device\n"); + err = -ENOTSUPP; + goto err_dma_free; + } + + netif_carrier_off(net_dev); + + netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); + + return 0; + +err_dma_free: + bgmac_dma_free(bgmac); + +err_netdev_free: + bcma_set_drvdata(core, NULL); + free_netdev(net_dev); + + return err; +} + +static void bgmac_remove(struct bcma_device *core) +{ + struct bgmac *bgmac = bcma_get_drvdata(core); + + netif_napi_del(&bgmac->napi); + unregister_netdev(bgmac->net_dev); + bgmac_dma_free(bgmac); + bcma_set_drvdata(core, NULL); + free_netdev(bgmac->net_dev); +} + +static struct bcma_driver bgmac_bcma_driver = { + .name = KBUILD_MODNAME, + .id_table = bgmac_bcma_tbl, + .probe = bgmac_probe, + .remove = bgmac_remove, +}; + +static int __init bgmac_init(void) +{ + int err; + + err = bcma_driver_register(&bgmac_bcma_driver); + if (err) + return err; + pr_info("Broadcom 47xx GBit MAC driver loaded\n"); + + return 0; +} + +static void __exit bgmac_exit(void) +{ + bcma_driver_unregister(&bgmac_bcma_driver); +} + +module_init(bgmac_init) +module_exit(bgmac_exit) + +MODULE_AUTHOR("Rafał Miłecki"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h new file mode 100644 index 0000000..1299470 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bgmac.h @@ -0,0 +1,456 @@ +#ifndef _BGMAC_H +#define _BGMAC_H + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define bgmac_err(bgmac, fmt, ...) \ + dev_err(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) +#define bgmac_warn(bgmac, fmt, ...) \ + dev_warn(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) +#define bgmac_info(bgmac, fmt, ...) \ + dev_info(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) +#define bgmac_dbg(bgmac, fmt, ...) \ + dev_dbg(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) + +#include +#include + +#define BGMAC_DEV_CTL 0x000 +#define BGMAC_DC_TSM 0x00000002 +#define BGMAC_DC_CFCO 0x00000004 +#define BGMAC_DC_RLSS 0x00000008 +#define BGMAC_DC_MROR 0x00000010 +#define BGMAC_DC_FCM_MASK 0x00000060 +#define BGMAC_DC_FCM_SHIFT 5 +#define BGMAC_DC_NAE 0x00000080 +#define BGMAC_DC_TF 0x00000100 +#define BGMAC_DC_RDS_MASK 0x00030000 +#define BGMAC_DC_RDS_SHIFT 16 +#define BGMAC_DC_TDS_MASK 0x000c0000 +#define BGMAC_DC_TDS_SHIFT 18 +#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */ +#define BGMAC_DS_RBF 0x00000001 +#define BGMAC_DS_RDF 0x00000002 +#define BGMAC_DS_RIF 0x00000004 +#define BGMAC_DS_TBF 0x00000008 +#define BGMAC_DS_TDF 0x00000010 +#define BGMAC_DS_TIF 0x00000020 +#define BGMAC_DS_PO 0x00000040 +#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */ +#define BGMAC_DS_MM_SHIFT 8 +#define BGMAC_BIST_STATUS 0x00c +#define BGMAC_INT_STATUS 0x020 /* Interrupt status */ +#define BGMAC_IS_MRO 0x00000001 +#define BGMAC_IS_MTO 0x00000002 +#define BGMAC_IS_TFD 0x00000004 +#define BGMAC_IS_LS 0x00000008 +#define BGMAC_IS_MDIO 0x00000010 +#define BGMAC_IS_MR 0x00000020 +#define BGMAC_IS_MT 0x00000040 +#define BGMAC_IS_TO 0x00000080 +#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */ +#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */ +#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */ +#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */ +#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive FIFO overflow */ +#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit FIFO underflow */ +#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */ +#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */ +#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */ +#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */ +#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */ +#define BGMAC_IS_TX_MASK 0x0f000000 +#define BGMAC_IS_INTMASK 0x0f01fcff +#define BGMAC_IS_ERRMASK 0x0000fc00 +#define BGMAC_INT_MASK 0x024 /* Interrupt mask */ +#define BGMAC_GP_TIMER 0x028 +#define BGMAC_INT_RECV_LAZY 0x100 +#define BGMAC_IRL_TO_MASK 0x00ffffff +#define BGMAC_IRL_FC_MASK 0xff000000 +#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */ +#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */ +#define BGMAC_WRRTHRESH 0x108 +#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c +#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */ +#define BGMAC_PA_DATA_MASK 0x0000ffff +#define BGMAC_PA_ADDR_MASK 0x001f0000 +#define BGMAC_PA_ADDR_SHIFT 16 +#define BGMAC_PA_REG_MASK 0x1f000000 +#define BGMAC_PA_REG_SHIFT 24 +#define BGMAC_PA_WRITE 0x20000000 +#define BGMAC_PA_START 0x40000000 +#define BGMAC_PHY_CNTL 0x188 /* PHY control address */ +#define BGMAC_PC_EPA_MASK 0x0000001f +#define BGMAC_PC_MCT_MASK 0x007f0000 +#define BGMAC_PC_MCT_SHIFT 16 +#define BGMAC_PC_MTE 0x00800000 +#define BGMAC_TXQ_CTL 0x18c +#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff +#define BGMAC_TXQ_CTL_DBT_SHIFT 0 +#define BGMAC_RXQ_CTL 0x190 +#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff +#define BGMAC_RXQ_CTL_DBT_SHIFT 0 +#define BGMAC_RXQ_CTL_PTE 0x00001000 +#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000 +#define BGMAC_RXQ_CTL_MDP_SHIFT 24 +#define BGMAC_GPIO_SELECT 0x194 +#define BGMAC_GPIO_OUTPUT_EN 0x198 +/* For 0x1e0 see BCMA_CLKCTLST */ +#define BGMAC_HW_WAR 0x1e4 +#define BGMAC_PWR_CTL 0x1e8 +#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */ +#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */ +#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */ +#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */ +#define BGMAC_TX_GOOD_OCTETS 0x300 +#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304 +#define BGMAC_TX_GOOD_PKTS 0x308 +#define BGMAC_TX_OCTETS 0x30c +#define BGMAC_TX_OCTETS_HIGH 0x310 +#define BGMAC_TX_PKTS 0x314 +#define BGMAC_TX_BROADCAST_PKTS 0x318 +#define BGMAC_TX_MULTICAST_PKTS 0x31c +#define BGMAC_TX_LEN_64 0x320 +#define BGMAC_TX_LEN_65_TO_127 0x324 +#define BGMAC_TX_LEN_128_TO_255 0x328 +#define BGMAC_TX_LEN_256_TO_511 0x32c +#define BGMAC_TX_LEN_512_TO_1023 0x330 +#define BGMAC_TX_LEN_1024_TO_1522 0x334 +#define BGMAC_TX_LEN_1523_TO_2047 0x338 +#define BGMAC_TX_LEN_2048_TO_4095 0x33c +#define BGMAC_TX_LEN_4095_TO_8191 0x340 +#define BGMAC_TX_LEN_8192_TO_MAX 0x344 +#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */ +#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */ +#define BGMAC_TX_FRAGMENT_PKTS 0x350 +#define BGMAC_TX_UNDERRUNS 0x354 /* Error */ +#define BGMAC_TX_TOTAL_COLS 0x358 +#define BGMAC_TX_SINGLE_COLS 0x35c +#define BGMAC_TX_MULTIPLE_COLS 0x360 +#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */ +#define BGMAC_TX_LATE_COLS 0x368 /* Error */ +#define BGMAC_TX_DEFERED 0x36c +#define BGMAC_TX_CARRIER_LOST 0x370 +#define BGMAC_TX_PAUSE_PKTS 0x374 +#define BGMAC_TX_UNI_PKTS 0x378 +#define BGMAC_TX_Q0_PKTS 0x37c +#define BGMAC_TX_Q0_OCTETS 0x380 +#define BGMAC_TX_Q0_OCTETS_HIGH 0x384 +#define BGMAC_TX_Q1_PKTS 0x388 +#define BGMAC_TX_Q1_OCTETS 0x38c +#define BGMAC_TX_Q1_OCTETS_HIGH 0x390 +#define BGMAC_TX_Q2_PKTS 0x394 +#define BGMAC_TX_Q2_OCTETS 0x398 +#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c +#define BGMAC_TX_Q3_PKTS 0x3a0 +#define BGMAC_TX_Q3_OCTETS 0x3a4 +#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8 +#define BGMAC_RX_GOOD_OCTETS 0x3b0 +#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4 +#define BGMAC_RX_GOOD_PKTS 0x3b8 +#define BGMAC_RX_OCTETS 0x3bc +#define BGMAC_RX_OCTETS_HIGH 0x3c0 +#define BGMAC_RX_PKTS 0x3c4 +#define BGMAC_RX_BROADCAST_PKTS 0x3c8 +#define BGMAC_RX_MULTICAST_PKTS 0x3cc +#define BGMAC_RX_LEN_64 0x3d0 +#define BGMAC_RX_LEN_65_TO_127 0x3d4 +#define BGMAC_RX_LEN_128_TO_255 0x3d8 +#define BGMAC_RX_LEN_256_TO_511 0x3dc +#define BGMAC_RX_LEN_512_TO_1023 0x3e0 +#define BGMAC_RX_LEN_1024_TO_1522 0x3e4 +#define BGMAC_RX_LEN_1523_TO_2047 0x3e8 +#define BGMAC_RX_LEN_2048_TO_4095 0x3ec +#define BGMAC_RX_LEN_4095_TO_8191 0x3f0 +#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4 +#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */ +#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */ +#define BGMAC_RX_FRAGMENT_PKTS 0x400 +#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */ +#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */ +#define BGMAC_RX_UNDERSIZE 0x40c /* Error */ +#define BGMAC_RX_CRC_ERRS 0x410 /* Error */ +#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */ +#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */ +#define BGMAC_RX_PAUSE_PKTS 0x41c +#define BGMAC_RX_NONPAUSE_PKTS 0x420 +#define BGMAC_RX_SACHANGES 0x424 +#define BGMAC_RX_UNI_PKTS 0x428 +#define BGMAC_UNIMAC_VERSION 0x800 +#define BGMAC_HDBKP_CTL 0x804 +#define BGMAC_CMDCFG 0x808 /* Configuration */ +#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */ +#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */ +#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */ +#define BGMAC_CMDCFG_ES_10 0x00000000 +#define BGMAC_CMDCFG_ES_100 0x00000004 +#define BGMAC_CMDCFG_ES_1000 0x00000008 +#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */ +#define BGMAC_CMDCFG_PAD_EN 0x00000020 +#define BGMAC_CMDCFG_CF 0x00000040 +#define BGMAC_CMDCFG_PF 0x00000080 +#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */ +#define BGMAC_CMDCFG_TAI 0x00000200 +#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ +#define BGMAC_CMDCFG_HD_SHIFT 10 +#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */ +#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ +#define BGMAC_CMDCFG_AE 0x00400000 +#define BGMAC_CMDCFG_CFE 0x00800000 +#define BGMAC_CMDCFG_NLC 0x01000000 +#define BGMAC_CMDCFG_RL 0x02000000 +#define BGMAC_CMDCFG_RED 0x04000000 +#define BGMAC_CMDCFG_PE 0x08000000 +#define BGMAC_CMDCFG_TPI 0x10000000 +#define BGMAC_CMDCFG_AT 0x20000000 +#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */ +#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */ +#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */ +#define BGMAC_PAUSEQUANTA 0x818 +#define BGMAC_MAC_MODE 0x844 +#define BGMAC_OUTERTAG 0x848 +#define BGMAC_INNERTAG 0x84c +#define BGMAC_TXIPG 0x85c +#define BGMAC_PAUSE_CTL 0xb30 +#define BGMAC_TX_FLUSH 0xb34 +#define BGMAC_RX_STATUS 0xb38 +#define BGMAC_TX_STATUS 0xb3c + +#define BGMAC_PHY_CTL 0x00 +#define BGMAC_PHY_CTL_SPEED_MSB 0x0040 +#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */ +#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */ +#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */ +#define BGMAC_PHY_CTL_SPEED 0x2000 +#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */ +#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */ +/* Helpers */ +#define BGMAC_PHY_CTL_SPEED_10 0 +#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED +#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB +#define BGMAC_PHY_ADV 0x04 +#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */ +#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */ +#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */ +#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */ +#define BGMAC_PHY_ADV2 0x09 +#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */ +#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */ + +/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */ +#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */ +#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */ + +/* BCMA GMAC core specific IO status (BCMA_IOST) flags */ +#define BGMAC_BCMA_IOST_ATTACHED 0x00000800 + +#define BGMAC_NUM_MIB_TX_REGS \ + (((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1) +#define BGMAC_NUM_MIB_RX_REGS \ + (((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1) + +#define BGMAC_DMA_TX_CTL 0x00 +#define BGMAC_DMA_TX_ENABLE 0x00000001 +#define BGMAC_DMA_TX_SUSPEND 0x00000002 +#define BGMAC_DMA_TX_LOOPBACK 0x00000004 +#define BGMAC_DMA_TX_FLUSH 0x00000010 +#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800 +#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000 +#define BGMAC_DMA_TX_ADDREXT_SHIFT 16 +#define BGMAC_DMA_TX_INDEX 0x04 +#define BGMAC_DMA_TX_RINGLO 0x08 +#define BGMAC_DMA_TX_RINGHI 0x0C +#define BGMAC_DMA_TX_STATUS 0x10 +#define BGMAC_DMA_TX_STATDPTR 0x00001FFF +#define BGMAC_DMA_TX_STAT 0xF0000000 +#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000 +#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000 +#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000 +#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000 +#define BGMAC_DMA_TX_STAT_SUSP 0x40000000 +#define BGMAC_DMA_TX_ERROR 0x14 +#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF +#define BGMAC_DMA_TX_ERR 0xF0000000 +#define BGMAC_DMA_TX_ERR_NOERR 0x00000000 +#define BGMAC_DMA_TX_ERR_PROT 0x10000000 +#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000 +#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000 +#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000 +#define BGMAC_DMA_TX_ERR_CORE 0x50000000 +#define BGMAC_DMA_RX_CTL 0x20 +#define BGMAC_DMA_RX_ENABLE 0x00000001 +#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE +#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1 +#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100 +#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400 +#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800 +#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000 +#define BGMAC_DMA_RX_ADDREXT_SHIFT 16 +#define BGMAC_DMA_RX_INDEX 0x24 +#define BGMAC_DMA_RX_RINGLO 0x28 +#define BGMAC_DMA_RX_RINGHI 0x2C +#define BGMAC_DMA_RX_STATUS 0x30 +#define BGMAC_DMA_RX_STATDPTR 0x00001FFF +#define BGMAC_DMA_RX_STAT 0xF0000000 +#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000 +#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000 +#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000 +#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000 +#define BGMAC_DMA_RX_STAT_SUSP 0x40000000 +#define BGMAC_DMA_RX_ERROR 0x34 +#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF +#define BGMAC_DMA_RX_ERR 0xF0000000 +#define BGMAC_DMA_RX_ERR_NOERR 0x00000000 +#define BGMAC_DMA_RX_ERR_PROT 0x10000000 +#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000 +#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000 +#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000 +#define BGMAC_DMA_RX_ERR_CORE 0x50000000 + +#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */ +#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */ +#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */ +#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */ +#define BGMAC_DESC_CTL1_LEN 0x00001FFF + +#define BGMAC_PHY_NOREGS 0x1E +#define BGMAC_PHY_MASK 0x1F + +#define BGMAC_MAX_TX_RINGS 4 +#define BGMAC_MAX_RX_RINGS 1 + +#define BGMAC_TX_RING_SLOTS 128 +#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */ + +#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */ +#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ +#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */ +#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE) + +#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */ +#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */ + +#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030 +#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000 +#define BGMAC_CHIPCTL_1_IF_TYPE_MI 0x00000010 +#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020 +#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0 +#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000 +#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040 +#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080 +#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0 +#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 + +#define BGMAC_SPEED_10 0x0001 +#define BGMAC_SPEED_100 0x0002 +#define BGMAC_SPEED_1000 0x0004 + +#define BGMAC_WEIGHT 64 + +#define ETHER_MAX_LEN 1518 + +struct bgmac_slot_info { + struct sk_buff *skb; + dma_addr_t dma_addr; +}; + +struct bgmac_dma_desc { + __le32 ctl0; + __le32 ctl1; + __le32 addr_low; + __le32 addr_high; +} __packed; + +enum bgmac_dma_ring_type { + BGMAC_DMA_RING_TX, + BGMAC_DMA_RING_RX, +}; + +/** + * bgmac_dma_ring - contains info about DMA ring (either TX or RX one) + * @start: index of the first slot containing data + * @end: index of a slot that can *not* be read (yet) + * + * Be really aware of the specific @end meaning. It's an index of a slot *after* + * the one containing data that can be read. If @start equals @end the ring is + * empty. + */ +struct bgmac_dma_ring { + u16 num_slots; + u16 start; + u16 end; + + u16 mmio_base; + struct bgmac_dma_desc *cpu_base; + dma_addr_t dma_base; + + struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS]; +}; + +struct bgmac_rx_header { + __le16 len; + __le16 flags; + __le16 pad[12]; +}; + +struct bgmac { + struct bcma_device *core; + struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ + struct net_device *net_dev; + struct napi_struct napi; + + /* DMA */ + struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS]; + struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS]; + + /* Stats */ + bool stats_grabbed; + u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS]; + u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS]; + + /* Int */ + u32 int_mask; + u32 int_status; + + /* Speed-related */ + int speed; + bool autoneg; + bool full_duplex; + + u8 phyaddr; + bool has_robosw; + + bool loopback; +}; + +static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) +{ + return bcma_read32(bgmac->core, offset); +} + +static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) +{ + bcma_write32(bgmac->core, offset, value); +} + +static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask, + u32 set) +{ + bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set); +} + +static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask) +{ + bgmac_maskset(bgmac, offset, mask, 0); +} + +static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set) +{ + bgmac_maskset(bgmac, offset, ~0, set); +} + +u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg); +void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value); + +#endif /* _BGMAC_H */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 9a0e3fa..ee332fa 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -634,4 +634,6 @@ extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); +extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ -- cgit v0.10.2 From 95c7e0e4d4792f9c9629ad759c9be047a3ddbcc5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 9 Jan 2013 07:19:37 +0000 Subject: ipv4: Use FIELD_SIZEOF() in inet_init(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 24b384b..4fdf9671 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1705,12 +1705,11 @@ static struct packet_type ip_packet_type __read_mostly = { static int __init inet_init(void) { - struct sk_buff *dummy_skb; struct inet_protosw *q; struct list_head *r; int rc = -EINVAL; - BUILD_BUG_ON(sizeof(struct inet_skb_parm) > sizeof(dummy_skb->cb)); + BUILD_BUG_ON(sizeof(struct inet_skb_parm) > FIELD_SIZEOF(struct sk_buff, cb)); sysctl_local_reserved_ports = kzalloc(65536 / 8, GFP_KERNEL); if (!sysctl_local_reserved_ports) -- cgit v0.10.2 From ba96bcbcd213e66306e8669e3442b0b3689dd768 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 9 Jan 2013 07:19:43 +0000 Subject: ipv6: Use FIELD_SIZEOF() in inet6_init(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index b043c60..6b793bf 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -811,11 +811,10 @@ static struct pernet_operations inet6_net_ops = { static int __init inet6_init(void) { - struct sk_buff *dummy_skb; struct list_head *r; int err = 0; - BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb)); + BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > FIELD_SIZEOF(struct sk_buff, cb)); /* Register the socket-side information for inet6_create. */ for (r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r) -- cgit v0.10.2 From fab25745912a82baa7c9e73f59079108d56b5d26 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 9 Jan 2013 07:19:48 +0000 Subject: netlink: Use FIELD_SIZEOF() in netlink_proto_init(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index c0353d5..74827e3 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2185,7 +2185,6 @@ static struct pernet_operations __net_initdata netlink_net_ops = { static int __init netlink_proto_init(void) { - struct sk_buff *dummy_skb; int i; unsigned long limit; unsigned int order; @@ -2194,7 +2193,7 @@ static int __init netlink_proto_init(void) if (err != 0) goto out; - BUILD_BUG_ON(sizeof(struct netlink_skb_parms) > sizeof(dummy_skb->cb)); + BUILD_BUG_ON(sizeof(struct netlink_skb_parms) > FIELD_SIZEOF(struct sk_buff, cb)); nl_table = kcalloc(MAX_LINKS, sizeof(*nl_table), GFP_KERNEL); if (!nl_table) -- cgit v0.10.2 From 3523b29bd2cd58432ea1bf3629695ec1ab607722 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 9 Jan 2013 07:19:55 +0000 Subject: openvswitch: Use FIELD_SIZEOF() in dp_init(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index f996db3..d8c13a9 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -1989,10 +1989,9 @@ static struct pernet_operations ovs_net_ops = { static int __init dp_init(void) { - struct sk_buff *dummy_skb; int err; - BUILD_BUG_ON(sizeof(struct ovs_skb_cb) > sizeof(dummy_skb->cb)); + BUILD_BUG_ON(sizeof(struct ovs_skb_cb) > FIELD_SIZEOF(struct sk_buff, cb)); pr_info("Open vSwitch switching datapath\n"); -- cgit v0.10.2 From ce6654cfc12558cc65b198cca991684e58e10bc6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 9 Jan 2013 07:20:01 +0000 Subject: rxrpc: Use FIELD_SIZEOF() in af_rxrpc_init(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 05996d0..5b0fd29 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include @@ -792,10 +793,9 @@ static const struct net_proto_family rxrpc_family_ops = { */ static int __init af_rxrpc_init(void) { - struct sk_buff *dummy_skb; int ret = -1; - BUILD_BUG_ON(sizeof(struct rxrpc_skb_priv) > sizeof(dummy_skb->cb)); + BUILD_BUG_ON(sizeof(struct rxrpc_skb_priv) > FIELD_SIZEOF(struct sk_buff, cb)); rxrpc_epoch = htonl(get_seconds()); -- cgit v0.10.2 From b4fff5f8bf32766ecaa4af6d5c7ef7f0ffb88ed2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 9 Jan 2013 07:20:07 +0000 Subject: unix: Use FIELD_SIZEOF() in af_unix_init(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 5b5c876..0c61236 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2426,9 +2426,8 @@ static struct pernet_operations unix_net_ops = { static int __init af_unix_init(void) { int rc = -1; - struct sk_buff *dummy_skb; - BUILD_BUG_ON(sizeof(struct unix_skb_parms) > sizeof(dummy_skb->cb)); + BUILD_BUG_ON(sizeof(struct unix_skb_parms) > FIELD_SIZEOF(struct sk_buff, cb)); rc = proto_register(&unix_proto, 1); if (rc != 0) { -- cgit v0.10.2 From 29166107fd34a4d180c1adaaaccab0c050defc2e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 8 Jan 2013 03:42:14 +0000 Subject: bnx2x: NULL dereference on error in debug code "vfop" is NULL here. I've changed the debugging to not use it. Signed-off-by: Dan Carpenter Acked-by: Ariel Elior Acked-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index f2f5c8e..08db503 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -463,8 +463,7 @@ static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp, return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor, cmd->block); } - DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop. rc %d\n", - vf->abs_vfid, vfop->rc); + DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop.\n", vf->abs_vfid); return -ENOMEM; } -- cgit v0.10.2 From 6c40d100ce3311a44ef82c678fb46833a270c007 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 8 Jan 2013 06:44:23 +0000 Subject: ipv6: Use container_of macro instead of magic number to get ipv6 header. In ipv6_recv_error(), addr_offset points to daddr field of the ip header. To get ipv6 header, use container_of() macro instead of substracting magic number (24). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 8edf260..56b692b 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -356,12 +356,11 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) sin->sin6_port = serr->port; sin->sin6_scope_id = 0; if (skb->protocol == htons(ETH_P_IPV6)) { - sin->sin6_addr = - *(struct in6_addr *)(nh + serr->addr_offset); + const struct ipv6hdr *ip6h = container_of((struct in6_addr *)(nh + serr->addr_offset), + struct ipv6hdr, daddr); + sin->sin6_addr = ip6h->daddr; if (np->sndflow) - sin->sin6_flowinfo = - (*(__be32 *)(nh + serr->addr_offset - 24) & - IPV6_FLOWINFO_MASK); + sin->sin6_flowinfo = *(__be32 *)ip6h & IPV6_FLOWINFO_MASK; if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL) sin->sin6_scope_id = IP6CB(skb)->iif; } else { -- cgit v0.10.2 From a0376db0f234a8053100bddf26c073be79546b2b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 8 Jan 2013 06:47:08 +0000 Subject: ipv6: Optimize ipv6_change_dsfield(). Do not convert endian back and forth. If the caller uses contant "mask" argument (and most callers do), we can omit runtime endian conversion here. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/dsfield.h b/include/net/dsfield.h index 8a8d4e0..e1ad903 100644 --- a/include/net/dsfield.h +++ b/include/net/dsfield.h @@ -43,11 +43,9 @@ static inline void ipv4_change_dsfield(struct iphdr *iph,__u8 mask, static inline void ipv6_change_dsfield(struct ipv6hdr *ipv6h,__u8 mask, __u8 value) { - __u16 tmp; + __be16 *p = (__force __be16 *)ipv6h; - tmp = ntohs(*(__be16 *) ipv6h); - tmp = (tmp & ((mask << 4) | 0xf00f)) | (value << 4); - *(__be16 *) ipv6h = htons(tmp); + *p = (*p & htons((((u16)mask << 4) | 0xf00f))) | htons((u16)value << 4); } -- cgit v0.10.2 From 3675c8d7144e91d9a2a1f6f12e576cb92e06f352 Mon Sep 17 00:00:00 2001 From: Barry Grussling Date: Tue, 8 Jan 2013 16:05:53 +0000 Subject: DSA: Convert DSA comments to network-style comments Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 325391d..637373c 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -67,27 +67,19 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) int i; int ret; - /* - * Set all ports to the disabled state. - */ + /* Set all ports to the disabled state. */ for (i = 0; i < 6; i++) { ret = REG_READ(REG_PORT(i), 0x04); REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); } - /* - * Wait for transmit queues to drain. - */ + /* Wait for transmit queues to drain. */ msleep(2); - /* - * Reset the switch. - */ + /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); - /* - * Wait up to one second for reset to complete. - */ + /* Wait up to one second for reset to complete. */ for (i = 0; i < 1000; i++) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0x8000) == 0x0000) @@ -103,15 +95,13 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) static int mv88e6060_setup_global(struct dsa_switch *ds) { - /* - * Disable discarding of frames with excessive collisions, + /* Disable discarding of frames with excessive collisions, * set the maximum frame size to 1536 bytes, and mask all * interrupt sources. */ REG_WRITE(REG_GLOBAL, 0x04, 0x0800); - /* - * Enable automatic address learning, set the address + /* Enable automatic address learning, set the address * database size to 1024 entries, and set the default aging * time to 5 minutes. */ @@ -124,16 +114,14 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p) { int addr = REG_PORT(p); - /* - * Do not force flow control, disable Ingress and Egress + /* Do not force flow control, disable Ingress and Egress * Header tagging, disable VLAN tunneling, and set the port * state to Forwarding. Additionally, if this is the CPU * port, enable Ingress and Egress Trailer tagging mode. */ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003); - /* - * Port based VLAN map: give each port its own address + /* Port based VLAN map: give each port its own address * database, allow the CPU port to talk to each of the 'real' * ports, and allow each of the 'real' ports to only talk to * the CPU port. @@ -144,8 +132,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p) ds->phys_port_mask : (1 << ds->dst->cpu_port))); - /* - * Port Association Vector: when learning source addresses + /* Port Association Vector: when learning source addresses * of packets, add the address to the address database using * a port bitmap that has only the bit for this port set and * the other bits clear. diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c index c17c75b..a644fc9 100644 --- a/drivers/net/dsa/mv88e6123_61_65.c +++ b/drivers/net/dsa/mv88e6123_61_65.c @@ -51,27 +51,19 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds) int i; int ret; - /* - * Set all ports to the disabled state. - */ + /* Set all ports to the disabled state. */ for (i = 0; i < 8; i++) { ret = REG_READ(REG_PORT(i), 0x04); REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); } - /* - * Wait for transmit queues to drain. - */ + /* Wait for transmit queues to drain. */ msleep(2); - /* - * Reset the switch. - */ + /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x04, 0xc400); - /* - * Wait up to one second for reset to complete. - */ + /* Wait up to one second for reset to complete. */ for (i = 0; i < 1000; i++) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0xc800) == 0xc800) @@ -90,54 +82,45 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) int ret; int i; - /* - * Disable the PHY polling unit (since there won't be any + /* Disable the PHY polling unit (since there won't be any * external PHYs to poll), don't discard packets with * excessive collisions, and mask all interrupt sources. */ REG_WRITE(REG_GLOBAL, 0x04, 0x0000); - /* - * Set the default address aging time to 5 minutes, and + /* Set the default address aging time to 5 minutes, and * enable address learn messages to be sent to all message * ports. */ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); - /* - * Configure the priority mapping registers. - */ + /* Configure the priority mapping registers. */ ret = mv88e6xxx_config_prio(ds); if (ret < 0) return ret; - /* - * Configure the upstream port, and configure the upstream + /* Configure the upstream port, and configure the upstream * port as the port to which ingress and egress monitor frames * are to be sent. */ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); - /* - * Disable remote management for now, and set the switch's + /* Disable remote management for now, and set the switch's * DSA device number. */ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f); - /* - * Send all frames with destination addresses matching + /* Send all frames with destination addresses matching * 01:80:c2:00:00:2x to the CPU port. */ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff); - /* - * Send all frames with destination addresses matching + /* Send all frames with destination addresses matching * 01:80:c2:00:00:0x to the CPU port. */ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); - /* - * Disable the loopback filter, disable flow control + /* Disable the loopback filter, disable flow control * messages, disable flood broadcast override, disable * removing of provider tags, disable ATU age violation * interrupts, disable tag flow control, force flow @@ -146,9 +129,7 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) */ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); - /* - * Program the DSA routing table. - */ + /* Program the DSA routing table. */ for (i = 0; i < 32; i++) { int nexthop; @@ -159,33 +140,24 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop); } - /* - * Clear all trunk masks. - */ + /* Clear all trunk masks. */ for (i = 0; i < 8; i++) REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff); - /* - * Clear all trunk mappings. - */ + /* Clear all trunk mappings. */ for (i = 0; i < 16; i++) REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); - /* - * Disable ingress rate limiting by resetting all ingress + /* Disable ingress rate limiting by resetting all ingress * rate limit registers to their initial state. */ for (i = 0; i < 6; i++) REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8)); - /* - * Initialise cross-chip port VLAN table to reset defaults. - */ + /* Initialise cross-chip port VLAN table to reset defaults. */ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000); - /* - * Clear the priority override table. - */ + /* Clear the priority override table. */ for (i = 0; i < 16; i++) REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8)); @@ -199,8 +171,7 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) int addr = REG_PORT(p); u16 val; - /* - * MAC Forcing register: don't force link, speed, duplex + /* MAC Forcing register: don't force link, speed, duplex * or flow control state to any particular values on physical * ports, but force the CPU port and all DSA ports to 1000 Mb/s * full duplex. @@ -210,15 +181,13 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) else REG_WRITE(addr, 0x01, 0x0003); - /* - * Do not limit the period of time that this port can be + /* Do not limit the period of time that this port can be * paused for by the remote end or the period of time that * this port can pause the remote end. */ REG_WRITE(addr, 0x02, 0x0000); - /* - * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, + /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, * disable Header mode, enable IGMP/MLD snooping, disable VLAN * tunneling, determine priority by looking at 802.1p and IP * priority fields (IP prio has precedence), and set STP state @@ -245,14 +214,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) val |= 0x000c; REG_WRITE(addr, 0x04, val); - /* - * Port Control 1: disable trunking. Also, if this is the + /* Port Control 1: disable trunking. Also, if this is the * CPU port, enable learn messages to be sent to this port. */ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - /* - * Port based VLAN map: give each port its own address + /* Port based VLAN map: give each port its own address * database, allow the CPU port to talk to each of the 'real' * ports, and allow each of the 'real' ports to only talk to * the upstream port. @@ -264,14 +231,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) val |= 1 << dsa_upstream_port(ds); REG_WRITE(addr, 0x06, val); - /* - * Default VLAN ID and priority: don't set a default VLAN + /* Default VLAN ID and priority: don't set a default VLAN * ID, and set the default packet priority to zero. */ REG_WRITE(addr, 0x07, 0x0000); - /* - * Port Control 2: don't force a good FCS, set the maximum + /* Port Control 2: don't force a good FCS, set the maximum * frame size to 10240 bytes, don't let the switch add or * strip 802.1q tags, don't discard tagged or untagged frames * on this port, do a destination address lookup on all @@ -281,48 +246,36 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) */ REG_WRITE(addr, 0x08, 0x2080); - /* - * Egress rate control: disable egress rate control. - */ + /* Egress rate control: disable egress rate control. */ REG_WRITE(addr, 0x09, 0x0001); - /* - * Egress rate control 2: disable egress rate control. - */ + /* Egress rate control 2: disable egress rate control. */ REG_WRITE(addr, 0x0a, 0x0000); - /* - * Port Association Vector: when learning source addresses + /* Port Association Vector: when learning source addresses * of packets, add the address to the address database using * a port bitmap that has only the bit for this port set and * the other bits clear. */ REG_WRITE(addr, 0x0b, 1 << p); - /* - * Port ATU control: disable limiting the number of address + /* Port ATU control: disable limiting the number of address * database entries that this port is allowed to use. */ REG_WRITE(addr, 0x0c, 0x0000); - /* - * Priorit Override: disable DA, SA and VTU priority override. - */ + /* Priority Override: disable DA, SA and VTU priority override. */ REG_WRITE(addr, 0x0d, 0x0000); - /* - * Port Ethertype: use the Ethertype DSA Ethertype value. - */ + /* Port Ethertype: use the Ethertype DSA Ethertype value. */ REG_WRITE(addr, 0x0f, ETH_P_EDSA); - /* - * Tag Remap: use an identity 802.1p prio -> switch prio + /* Tag Remap: use an identity 802.1p prio -> switch prio * mapping. */ REG_WRITE(addr, 0x18, 0x3210); - /* - * Tag Remap 2: use an identity 802.1p prio -> switch prio + /* Tag Remap 2: use an identity 802.1p prio -> switch prio * mapping. */ REG_WRITE(addr, 0x19, 0x7654); diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c index 55888b0..b613818 100644 --- a/drivers/net/dsa/mv88e6131.c +++ b/drivers/net/dsa/mv88e6131.c @@ -15,9 +15,7 @@ #include #include "mv88e6xxx.h" -/* - * Switch product IDs - */ +/* Switch product IDs */ #define ID_6085 0x04a0 #define ID_6095 0x0950 #define ID_6131 0x1060 @@ -45,27 +43,19 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds) int i; int ret; - /* - * Set all ports to the disabled state. - */ + /* Set all ports to the disabled state. */ for (i = 0; i < 11; i++) { ret = REG_READ(REG_PORT(i), 0x04); REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); } - /* - * Wait for transmit queues to drain. - */ + /* Wait for transmit queues to drain. */ msleep(2); - /* - * Reset the switch. - */ + /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x04, 0xc400); - /* - * Wait up to one second for reset to complete. - */ + /* Wait up to one second for reset to complete. */ for (i = 0; i < 1000; i++) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0xc800) == 0xc800) @@ -84,42 +74,34 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) int ret; int i; - /* - * Enable the PHY polling unit, don't discard packets with + /* Enable the PHY polling unit, don't discard packets with * excessive collisions, use a weighted fair queueing scheme * to arbitrate between packet queues, set the maximum frame * size to 1632, and mask all interrupt sources. */ REG_WRITE(REG_GLOBAL, 0x04, 0x4400); - /* - * Set the default address aging time to 5 minutes, and + /* Set the default address aging time to 5 minutes, and * enable address learn messages to be sent to all message * ports. */ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); - /* - * Configure the priority mapping registers. - */ + /* Configure the priority mapping registers. */ ret = mv88e6xxx_config_prio(ds); if (ret < 0) return ret; - /* - * Set the VLAN ethertype to 0x8100. - */ + /* Set the VLAN ethertype to 0x8100. */ REG_WRITE(REG_GLOBAL, 0x19, 0x8100); - /* - * Disable ARP mirroring, and configure the upstream port as + /* Disable ARP mirroring, and configure the upstream port as * the port to which ingress and egress monitor frames are to * be sent. */ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0); - /* - * Disable cascade port functionality unless this device + /* Disable cascade port functionality unless this device * is used in a cascade configuration, and set the switch's * DSA device number. */ @@ -128,23 +110,19 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) else REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f)); - /* - * Send all frames with destination addresses matching + /* Send all frames with destination addresses matching * 01:80:c2:00:00:0x to the CPU port. */ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); - /* - * Ignore removed tag data on doubly tagged packets, disable + /* Ignore removed tag data on doubly tagged packets, disable * flow control messages, force flow control priority to the * highest, and send all special multicast frames to the CPU * port at the highest priority. */ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); - /* - * Program the DSA routing table. - */ + /* Program the DSA routing table. */ for (i = 0; i < 32; i++) { int nexthop; @@ -155,20 +133,15 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop); } - /* - * Clear all trunk masks. - */ + /* Clear all trunk masks. */ for (i = 0; i < 8; i++) REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff); - /* - * Clear all trunk mappings. - */ + /* Clear all trunk mappings. */ for (i = 0; i < 16; i++) REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); - /* - * Force the priority of IGMP/MLD snoop frames and ARP frames + /* Force the priority of IGMP/MLD snoop frames and ARP frames * to the highest setting. */ REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff); @@ -182,8 +155,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) int addr = REG_PORT(p); u16 val; - /* - * MAC Forcing register: don't force link, speed, duplex + /* MAC Forcing register: don't force link, speed, duplex * or flow control state to any particular values on physical * ports, but force the CPU port and all DSA ports to 1000 Mb/s * (100 Mb/s on 6085) full duplex. @@ -196,8 +168,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) else REG_WRITE(addr, 0x01, 0x0003); - /* - * Port Control: disable Core Tag, disable Drop-on-Lock, + /* Port Control: disable Core Tag, disable Drop-on-Lock, * transmit frames unmodified, disable Header mode, * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN * tunneling, determine priority by looking at 802.1p and @@ -214,8 +185,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) val = 0x0433; if (p == dsa_upstream_port(ds)) { val |= 0x0104; - /* - * On 6085, unknown multicast forward is controlled + /* On 6085, unknown multicast forward is controlled * here rather than in Port Control 2 register. */ if (ps->id == ID_6085) @@ -225,14 +195,12 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) val |= 0x0100; REG_WRITE(addr, 0x04, val); - /* - * Port Control 1: disable trunking. Also, if this is the + /* Port Control 1: disable trunking. Also, if this is the * CPU port, enable learn messages to be sent to this port. */ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - /* - * Port based VLAN map: give each port its own address + /* Port based VLAN map: give each port its own address * database, allow the CPU port to talk to each of the 'real' * ports, and allow each of the 'real' ports to only talk to * the upstream port. @@ -244,14 +212,12 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) val |= 1 << dsa_upstream_port(ds); REG_WRITE(addr, 0x06, val); - /* - * Default VLAN ID and priority: don't set a default VLAN + /* Default VLAN ID and priority: don't set a default VLAN * ID, and set the default packet priority to zero. */ REG_WRITE(addr, 0x07, 0x0000); - /* - * Port Control 2: don't force a good FCS, don't use + /* Port Control 2: don't force a good FCS, don't use * VLAN-based, source address-based or destination * address-based priority overrides, don't let the switch * add or strip 802.1q tags, don't discard tagged or @@ -264,8 +230,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * forwarding of unknown multicast addresses. */ if (ps->id == ID_6085) - /* - * on 6085, bits 3:0 are reserved, bit 6 control ARP + /* on 6085, bits 3:0 are reserved, bit 6 control ARP * mirroring, and multicast forward is handled in * Port Control register. */ @@ -277,32 +242,25 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) REG_WRITE(addr, 0x08, val); } - /* - * Rate Control: disable ingress rate limiting. - */ + /* Rate Control: disable ingress rate limiting. */ REG_WRITE(addr, 0x09, 0x0000); - /* - * Rate Control 2: disable egress rate limiting. - */ + /* Rate Control 2: disable egress rate limiting. */ REG_WRITE(addr, 0x0a, 0x0000); - /* - * Port Association Vector: when learning source addresses + /* Port Association Vector: when learning source addresses * of packets, add the address to the address database using * a port bitmap that has only the bit for this port set and * the other bits clear. */ REG_WRITE(addr, 0x0b, 1 << p); - /* - * Tag Remap: use an identity 802.1p prio -> switch prio + /* Tag Remap: use an identity 802.1p prio -> switch prio * mapping. */ REG_WRITE(addr, 0x18, 0x3210); - /* - * Tag Remap 2: use an identity 802.1p prio -> switch prio + /* Tag Remap 2: use an identity 802.1p prio -> switch prio * mapping. */ REG_WRITE(addr, 0x19, 0x7654); diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index a2c62c2..d436668 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -15,8 +15,7 @@ #include #include "mv88e6xxx.h" -/* - * If the switch's ADDR[4:0] strap pins are strapped to zero, it will +/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will * use all 32 SMI bus addresses on its SMI bus, and all switch registers * will be directly accessible on some {device address,register address} * pair. If the ADDR[4:0] pins are not strapped to zero, the switch @@ -48,30 +47,22 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg) if (sw_addr == 0) return mdiobus_read(bus, addr, reg); - /* - * Wait for the bus to become free. - */ + /* Wait for the bus to become free. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; - /* - * Transmit the read command. - */ + /* Transmit the read command. */ ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg); if (ret < 0) return ret; - /* - * Wait for the read command to complete. - */ + /* Wait for the read command to complete. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; - /* - * Read the data. - */ + /* Read the data. */ ret = mdiobus_read(bus, sw_addr, 1); if (ret < 0) return ret; @@ -100,30 +91,22 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, if (sw_addr == 0) return mdiobus_write(bus, addr, reg, val); - /* - * Wait for the bus to become free. - */ + /* Wait for the bus to become free. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; - /* - * Transmit the data to write. - */ + /* Transmit the data to write. */ ret = mdiobus_write(bus, sw_addr, 1, val); if (ret < 0) return ret; - /* - * Transmit the write command. - */ + /* Transmit the write command. */ ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg); if (ret < 0) return ret; - /* - * Wait for the write command to complete. - */ + /* Wait for the write command to complete. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; @@ -146,9 +129,7 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) int mv88e6xxx_config_prio(struct dsa_switch *ds) { - /* - * Configure the IP ToS mapping registers. - */ + /* Configure the IP ToS mapping registers. */ REG_WRITE(REG_GLOBAL, 0x10, 0x0000); REG_WRITE(REG_GLOBAL, 0x11, 0x0000); REG_WRITE(REG_GLOBAL, 0x12, 0x5555); @@ -158,9 +139,7 @@ int mv88e6xxx_config_prio(struct dsa_switch *ds) REG_WRITE(REG_GLOBAL, 0x16, 0xffff); REG_WRITE(REG_GLOBAL, 0x17, 0xffff); - /* - * Configure the IEEE 802.1p priority mapping register. - */ + /* Configure the IEEE 802.1p priority mapping register. */ REG_WRITE(REG_GLOBAL, 0x18, 0xfa41); return 0; @@ -183,14 +162,10 @@ int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr) for (i = 0; i < 6; i++) { int j; - /* - * Write the MAC address byte. - */ + /* Write the MAC address byte. */ REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]); - /* - * Wait for the write to complete. - */ + /* Wait for the write to complete. */ for (j = 0; j < 16; j++) { ret = REG_READ(REG_GLOBAL2, 0x0d); if ((ret & 0x8000) == 0) @@ -282,8 +257,7 @@ static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds) mutex_lock(&ps->ppu_mutex); - /* - * If the PHY polling unit is enabled, disable it so that + /* If the PHY polling unit is enabled, disable it so that * we can access the PHY registers. If it was already * disabled, cancel the timer that is going to re-enable * it. @@ -307,9 +281,7 @@ static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds) { struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - /* - * Schedule a timer to re-enable the PHY polling unit. - */ + /* Schedule a timer to re-enable the PHY polling unit. */ mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10)); mutex_unlock(&ps->ppu_mutex); } @@ -431,14 +403,10 @@ static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port) { int ret; - /* - * Snapshot the hardware statistics counters for this port. - */ + /* Snapshot the hardware statistics counters for this port. */ REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port); - /* - * Wait for the snapshotting to complete. - */ + /* Wait for the snapshotting to complete. */ ret = mv88e6xxx_stats_wait(ds); if (ret < 0) return ret; @@ -502,9 +470,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, return; } - /* - * Read each of the counters. - */ + /* Read each of the counters. */ for (i = 0; i < nr_stats; i++) { struct mv88e6xxx_hw_stat *s = stats + i; u32 low; diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h index fc2cd7b..029e13d 100644 --- a/drivers/net/dsa/mv88e6xxx.h +++ b/drivers/net/dsa/mv88e6xxx.h @@ -16,16 +16,14 @@ #define REG_GLOBAL2 0x1c struct mv88e6xxx_priv_state { - /* - * When using multi-chip addressing, this mutex protects + /* When using multi-chip addressing, this mutex protects * access to the indirect access registers. (In single-chip * mode, this mutex is effectively useless.) */ struct mutex smi_mutex; #ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU - /* - * Handles automatic disabling and re-enabling of the PHY + /* Handles automatic disabling and re-enabling of the PHY * polling unit. */ struct mutex ppu_mutex; @@ -34,8 +32,7 @@ struct mv88e6xxx_priv_state { struct timer_list ppu_timer; #endif - /* - * This mutex serialises access to the statistics unit. + /* This mutex serialises access to the statistics unit. * Hold this mutex over snapshot + dump sequences. */ struct mutex stats_mutex; -- cgit v0.10.2 From 19b2f97e468b74a8aedb4e5918bccaa5702e0742 Mon Sep 17 00:00:00 2001 From: Barry Grussling Date: Tue, 8 Jan 2013 16:05:54 +0000 Subject: DSA: Convert repeated msleep calls to timeouts Convert DSA msleep calls to timeout/usleep_range calls as reported by checkpatch.pl. Signed-off-by: Barry Grussling Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 637373c..8548f8d 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -8,6 +8,8 @@ * (at your option) any later version. */ +#include +#include #include #include #include @@ -66,6 +68,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) { int i; int ret; + unsigned long timeout; /* Set all ports to the disabled state. */ for (i = 0; i < 6; i++) { @@ -74,20 +77,21 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) } /* Wait for transmit queues to drain. */ - msleep(2); + usleep_range(2000, 4000); /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); /* Wait up to one second for reset to complete. */ - for (i = 0; i < 1000; i++) { + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0x8000) == 0x0000) break; - msleep(1); + usleep_range(1000, 2000); } - if (i == 1000) + if (time_after(jiffies, timeout)) return -ETIMEDOUT; return 0; diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c index a644fc9..41ee5b6 100644 --- a/drivers/net/dsa/mv88e6123_61_65.c +++ b/drivers/net/dsa/mv88e6123_61_65.c @@ -8,6 +8,8 @@ * (at your option) any later version. */ +#include +#include #include #include #include @@ -50,6 +52,7 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds) { int i; int ret; + unsigned long timeout; /* Set all ports to the disabled state. */ for (i = 0; i < 8; i++) { @@ -58,20 +61,21 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds) } /* Wait for transmit queues to drain. */ - msleep(2); + usleep_range(2000, 4000); /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x04, 0xc400); /* Wait up to one second for reset to complete. */ - for (i = 0; i < 1000; i++) { + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0xc800) == 0xc800) break; - msleep(1); + usleep_range(1000, 2000); } - if (i == 1000) + if (time_after(jiffies, timeout)) return -ETIMEDOUT; return 0; diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c index b613818..dadfafb 100644 --- a/drivers/net/dsa/mv88e6131.c +++ b/drivers/net/dsa/mv88e6131.c @@ -8,6 +8,8 @@ * (at your option) any later version. */ +#include +#include #include #include #include @@ -42,6 +44,7 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds) { int i; int ret; + unsigned long timeout; /* Set all ports to the disabled state. */ for (i = 0; i < 11; i++) { @@ -50,20 +53,21 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds) } /* Wait for transmit queues to drain. */ - msleep(2); + usleep_range(2000, 4000); /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x04, 0xc400); /* Wait up to one second for reset to complete. */ - for (i = 0; i < 1000; i++) { + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0xc800) == 0xc800) break; - msleep(1); + usleep_range(1000, 2000); } - if (i == 1000) + if (time_after(jiffies, timeout)) return -ETIMEDOUT; return 0; diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index d436668..afe7d80 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -8,6 +8,8 @@ * (at your option) any later version. */ +#include +#include #include #include #include @@ -196,14 +198,15 @@ int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val) static int mv88e6xxx_ppu_disable(struct dsa_switch *ds) { int ret; - int i; + unsigned long timeout; ret = REG_READ(REG_GLOBAL, 0x04); REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000); - for (i = 0; i < 1000; i++) { + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { ret = REG_READ(REG_GLOBAL, 0x00); - msleep(1); + usleep_range(1000, 2000); if ((ret & 0xc000) != 0xc000) return 0; } @@ -214,14 +217,15 @@ static int mv88e6xxx_ppu_disable(struct dsa_switch *ds) static int mv88e6xxx_ppu_enable(struct dsa_switch *ds) { int ret; - int i; + unsigned long timeout; ret = REG_READ(REG_GLOBAL, 0x04); REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000); - for (i = 0; i < 1000; i++) { + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { ret = REG_READ(REG_GLOBAL, 0x00); - msleep(1); + usleep_range(1000, 2000); if ((ret & 0xc000) == 0xc000) return 0; } -- cgit v0.10.2 From ab381a93ecedee413e13cfec456d1de40aa7eab4 Mon Sep 17 00:00:00 2001 From: Barry Grussling Date: Tue, 8 Jan 2013 16:05:55 +0000 Subject: DSA: Convert printk calls to netdev_info calls Convert DSA printk calls to netdev_info calls as recommended by checkpatch.pl. Signed-off-by: Barry Grussling Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 8548f8d..7a54ec0 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -236,7 +236,7 @@ static void mv88e6060_poll_link(struct dsa_switch *ds) if (!link) { if (netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link down\n", dev->name); + netdev_info(dev, "link down\n"); netif_carrier_off(dev); } continue; @@ -247,10 +247,11 @@ static void mv88e6060_poll_link(struct dsa_switch *ds) fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0; if (!netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " - "flow control %sabled\n", dev->name, - speed, duplex ? "full" : "half", - fc ? "en" : "dis"); + netdev_info(dev, + "link up, %d Mb/s, %s duplex, flow control %sabled\n", + speed, + duplex ? "full" : "half", + fc ? "en" : "dis"); netif_carrier_on(dev); } } diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index afe7d80..3756c74 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -356,7 +356,7 @@ void mv88e6xxx_poll_link(struct dsa_switch *ds) if (!link) { if (netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link down\n", dev->name); + netdev_info(dev, "link down\n"); netif_carrier_off(dev); } continue; @@ -380,10 +380,11 @@ void mv88e6xxx_poll_link(struct dsa_switch *ds) fc = (port_status & 0x8000) ? 1 : 0; if (!netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " - "flow control %sabled\n", dev->name, - speed, duplex ? "full" : "half", - fc ? "en" : "dis"); + netdev_info(dev, + "link up, %d Mb/s, %s duplex, flow control %sabled\n", + speed, + duplex ? "full" : "half", + fc ? "en" : "dis"); netif_carrier_on(dev); } } -- cgit v0.10.2 From 8568658148ccb4481af24d1b34621ae5074ea6f7 Mon Sep 17 00:00:00 2001 From: Barry Grussling Date: Tue, 8 Jan 2013 16:05:56 +0000 Subject: DSA: Convert spaces to tabs where appropriate Fix DSA whitespace issues reported by checkpatch.pl Signed-off-by: Barry Grussling Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 3756c74..17314ed 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -205,10 +205,10 @@ static int mv88e6xxx_ppu_disable(struct dsa_switch *ds) timeout = jiffies + 1 * HZ; while (time_before(jiffies, timeout)) { - ret = REG_READ(REG_GLOBAL, 0x00); + ret = REG_READ(REG_GLOBAL, 0x00); usleep_range(1000, 2000); - if ((ret & 0xc000) != 0xc000) - return 0; + if ((ret & 0xc000) != 0xc000) + return 0; } return -ETIMEDOUT; @@ -224,10 +224,10 @@ static int mv88e6xxx_ppu_enable(struct dsa_switch *ds) timeout = jiffies + 1 * HZ; while (time_before(jiffies, timeout)) { - ret = REG_READ(REG_GLOBAL, 0x00); + ret = REG_READ(REG_GLOBAL, 0x00); usleep_range(1000, 2000); - if ((ret & 0xc000) == 0xc000) - return 0; + if ((ret & 0xc000) == 0xc000) + return 0; } return -ETIMEDOUT; @@ -239,11 +239,11 @@ static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly) ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work); if (mutex_trylock(&ps->ppu_mutex)) { - struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1; + struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1; - if (mv88e6xxx_ppu_enable(ds) == 0) - ps->ppu_disabled = 0; - mutex_unlock(&ps->ppu_mutex); + if (mv88e6xxx_ppu_enable(ds) == 0) + ps->ppu_disabled = 0; + mutex_unlock(&ps->ppu_mutex); } } @@ -267,15 +267,15 @@ static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds) * it. */ if (!ps->ppu_disabled) { - ret = mv88e6xxx_ppu_disable(ds); - if (ret < 0) { - mutex_unlock(&ps->ppu_mutex); - return ret; - } - ps->ppu_disabled = 1; + ret = mv88e6xxx_ppu_disable(ds); + if (ret < 0) { + mutex_unlock(&ps->ppu_mutex); + return ret; + } + ps->ppu_disabled = 1; } else { - del_timer(&ps->ppu_timer); - ret = 0; + del_timer(&ps->ppu_timer); + ret = 0; } return ret; @@ -307,8 +307,8 @@ int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum) ret = mv88e6xxx_ppu_access_get(ds); if (ret >= 0) { - ret = mv88e6xxx_reg_read(ds, addr, regnum); - mv88e6xxx_ppu_access_put(ds); + ret = mv88e6xxx_reg_read(ds, addr, regnum); + mv88e6xxx_ppu_access_put(ds); } return ret; @@ -321,8 +321,8 @@ int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr, ret = mv88e6xxx_ppu_access_get(ds); if (ret >= 0) { - ret = mv88e6xxx_reg_write(ds, addr, regnum, val); - mv88e6xxx_ppu_access_put(ds); + ret = mv88e6xxx_reg_write(ds, addr, regnum, val); + mv88e6xxx_ppu_access_put(ds); } return ret; diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h index 029e13d..911ede5 100644 --- a/drivers/net/dsa/mv88e6xxx.h +++ b/drivers/net/dsa/mv88e6xxx.h @@ -49,7 +49,7 @@ struct mv88e6xxx_hw_stat { int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg); int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg); int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, - int reg, u16 val); + int reg, u16 val); int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val); int mv88e6xxx_config_prio(struct dsa_switch *ds); int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr); -- cgit v0.10.2 From 1f1e4958069c6e7ff3f8b73148d14c08d015f0bf Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Wed, 9 Jan 2013 07:42:49 +0000 Subject: cxgb4: Fix incorrect PFVF CMASK With Hard-Wired firmware configuration it was incorrectly provisioning the VFs Channel Access Rights Mask. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index aa63b66..424f8ed 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4016,8 +4016,7 @@ static int adap_init0_no_config(struct adapter *adapter, int reset) VFRES_NEQ, VFRES_NETHCTRL, VFRES_NIQFLINT, VFRES_NIQ, VFRES_TC, VFRES_NVI, - FW_PFVF_CMD_CMASK_GET( - FW_PFVF_CMD_CMASK_MASK), + FW_PFVF_CMD_CMASK_MASK, pfvfres_pmask( adapter, pf, vf), VFRES_NEXACTF, -- cgit v0.10.2 From e384662b1c1004e6b1e9d2c4979945a383c07b7d Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 15:29:33 +0200 Subject: Bluetooth: Fix missing command complete event for mgmt_confirm_name All management commands are expected to indicate successful completion through a command complete event however the confirm name command was missing it. This patch add the sending of the missing event. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index e5502a5..577f316 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2493,7 +2493,8 @@ static int confirm_name(struct sock *sk, struct hci_dev *hdev, void *data, hci_inquiry_cache_update_resolve(hdev, e); } - err = 0; + err = cmd_complete(sk, hdev->id, MGMT_OP_CONFIRM_NAME, 0, &cp->addr, + sizeof(cp->addr)); failed: hci_dev_unlock(hdev); -- cgit v0.10.2 From 715a5bf2db4df4a7df64f420d21fb49ba146b3fa Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 15:29:34 +0200 Subject: Bluetooth: Fix missing command complete for mgmt_load_long_term_keys All management events are expected to indicate successful completion through a command complete event, however the load long term keys command was missing this. This patch adds the missing event. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 577f316..1dd41d4 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2648,7 +2648,7 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, { struct mgmt_cp_load_long_term_keys *cp = cp_data; u16 key_count, expected_len; - int i; + int i, err; key_count = __le16_to_cpu(cp->key_count); @@ -2682,9 +2682,12 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, key->enc_size, key->ediv, key->rand); } + err = cmd_complete(sk, hdev->id, MGMT_OP_LOAD_LONG_TERM_KEYS, 0, + NULL, 0); + hci_dev_unlock(hdev); - return 0; + return err; } static const struct mgmt_handler { -- cgit v0.10.2 From 575b3a02e20a10bb8110378ef363a8a174018680 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 15:29:35 +0200 Subject: Bluetooth: Fix checking for valid device class values The two lowest bits of the minor device class value are reserved and should be zero, and the three highest bits of the major device class likewise. The management code should therefore test for this and return a proper "invalid params" error if the condition is not met. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 1dd41d4..f3fec42 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1430,6 +1430,12 @@ static int set_dev_class(struct sock *sk, struct hci_dev *hdev, void *data, goto unlock; } + if ((cp->minor & 0x03) != 0 || (cp->major & 0xe0) != 0) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, + MGMT_STATUS_INVALID_PARAMS); + goto unlock; + } + hdev->major_class = cp->major; hdev->minor_class = cp->minor; -- cgit v0.10.2 From ee98f4738050bb93823ce9ba849f5d78f5b8c1a1 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 15:29:36 +0200 Subject: Bluetooth: Fix accepting set_dev_class for non-BR/EDR controllers The concept of Class of Device only exists for BR/EDR controllers. The mgmt_set_dev_class command should therefore return a proper "not supported" error if it is attempted for a controller that doesn't support BR/EDR (e.g. a single mode LE-only one). Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index f3fec42..d78ce81 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1424,6 +1424,12 @@ static int set_dev_class(struct sock *sk, struct hci_dev *hdev, void *data, hci_dev_lock(hdev); + if (!lmp_bredr_capable(hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, + MGMT_STATUS_NOT_SUPPORTED); + goto unlock; + } + if (test_bit(HCI_PENDING_CLASS, &hdev->dev_flags)) { err = cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, MGMT_STATUS_BUSY); -- cgit v0.10.2 From 13ecd8b6628c14c9a27832ce7c48315385272208 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 15:29:38 +0200 Subject: Bluetooth: Move non-critical sections outside of the dev lock This patch fixes sections of code that do not need hci_lock_dev to be outside of the lock. Such sections include code that do not touch the hdev at all as well as sections which just read a single byte from the supported_features value (i.e. all lmp_*_capable() macros). Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index d78ce81..28e01f9 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1133,13 +1133,11 @@ static int set_ssp(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) BT_DBG("request for %s", hdev->name); - hci_dev_lock(hdev); + if (!lmp_ssp_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_SSP, + MGMT_STATUS_NOT_SUPPORTED); - if (!lmp_ssp_capable(hdev)) { - err = cmd_status(sk, hdev->id, MGMT_OP_SET_SSP, - MGMT_STATUS_NOT_SUPPORTED); - goto failed; - } + hci_dev_lock(hdev); val = !!cp->val; @@ -1217,13 +1215,11 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) BT_DBG("request for %s", hdev->name); - hci_dev_lock(hdev); + if (!lmp_le_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_LE, + MGMT_STATUS_NOT_SUPPORTED); - if (!lmp_le_capable(hdev)) { - err = cmd_status(sk, hdev->id, MGMT_OP_SET_LE, - MGMT_STATUS_NOT_SUPPORTED); - goto unlock; - } + hci_dev_lock(hdev); val = !!cp->val; enabled = lmp_host_le_capable(hdev); @@ -1422,25 +1418,19 @@ static int set_dev_class(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); - hci_dev_lock(hdev); + if (!lmp_bredr_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, + MGMT_STATUS_NOT_SUPPORTED); - if (!lmp_bredr_capable(hdev)) { - err = cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, - MGMT_STATUS_NOT_SUPPORTED); - goto unlock; - } + if (test_bit(HCI_PENDING_CLASS, &hdev->dev_flags)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, + MGMT_STATUS_BUSY); - if (test_bit(HCI_PENDING_CLASS, &hdev->dev_flags)) { - err = cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, - MGMT_STATUS_BUSY); - goto unlock; - } + if ((cp->minor & 0x03) != 0 || (cp->major & 0xe0) != 0) + return cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, + MGMT_STATUS_INVALID_PARAMS); - if ((cp->minor & 0x03) != 0 || (cp->major & 0xe0) != 0) { - err = cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, - MGMT_STATUS_INVALID_PARAMS); - goto unlock; - } + hci_dev_lock(hdev); hdev->major_class = cp->major; hdev->minor_class = cp->minor; -- cgit v0.10.2 From a7e80f25ae2296d78163d75d753c796270464000 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 16:05:19 +0200 Subject: Bluetooth: Fix checking for exact values of boolean mgmt parameters All mgmt_set_* commands that take a boolean value encoded in the form of a byte should only accept the values 0x00 and 0x01. This patch adds the necessary checks for this and returns "invalid params" responses if anything else is provided as the value. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 28e01f9..3959c47 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -777,6 +777,10 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_POWERED, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) { @@ -872,6 +876,10 @@ static int set_discoverable(struct sock *sk, struct hci_dev *hdev, void *data, return cmd_status(sk, hdev->id, MGMT_OP_SET_DISCOVERABLE, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_DISCOVERABLE, + MGMT_STATUS_INVALID_PARAMS); + timeout = __le16_to_cpu(cp->timeout); if (!cp->val && timeout > 0) return cmd_status(sk, hdev->id, MGMT_OP_SET_DISCOVERABLE, @@ -971,6 +979,10 @@ static int set_connectable(struct sock *sk, struct hci_dev *hdev, void *data, return cmd_status(sk, hdev->id, MGMT_OP_SET_CONNECTABLE, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_CONNECTABLE, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); if (!hdev_is_powered(hdev)) { @@ -1041,6 +1053,10 @@ static int set_pairable(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_PAIRABLE, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); if (cp->val) @@ -1073,6 +1089,10 @@ static int set_link_security(struct sock *sk, struct hci_dev *hdev, void *data, return cmd_status(sk, hdev->id, MGMT_OP_SET_LINK_SECURITY, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_LINK_SECURITY, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); if (!hdev_is_powered(hdev)) { @@ -1137,6 +1157,10 @@ static int set_ssp(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) return cmd_status(sk, hdev->id, MGMT_OP_SET_SSP, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_SSP, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); val = !!cp->val; @@ -1197,6 +1221,10 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, + MGMT_STATUS_INVALID_PARAMS); + if (cp->val) set_bit(HCI_HS_ENABLED, &hdev->dev_flags); else @@ -1219,6 +1247,10 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) return cmd_status(sk, hdev->id, MGMT_OP_SET_LE, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_LE, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); val = !!cp->val; @@ -2598,6 +2630,10 @@ static int set_fast_connectable(struct sock *sk, struct hci_dev *hdev, return cmd_status(sk, hdev->id, MGMT_OP_SET_FAST_CONNECTABLE, MGMT_STATUS_NOT_SUPPORTED); + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_FAST_CONNECTABLE, + MGMT_STATUS_INVALID_PARAMS); + if (!hdev_is_powered(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_FAST_CONNECTABLE, MGMT_STATUS_NOT_POWERED); -- cgit v0.10.2 From 04106755763f558886a631338d12546345bae6e9 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 10 Jan 2013 14:54:09 +0200 Subject: Bluetooth: Fix returning proper command status for start_discovery Management commands should whenever possible fail with proper command status or command complete events. This patch fixes the mgmt_start_discovery command to do this for the failure cases where an incorrect parameter value was passed to it ("not supported" if the parameter value was valid but the controller doesn't support it and "invalid params" if it isn't valid at all). Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 3959c47..b1b0a36 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2382,31 +2382,45 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, switch (hdev->discovery.type) { case DISCOV_TYPE_BREDR: - if (lmp_bredr_capable(hdev)) - err = hci_do_inquiry(hdev, INQUIRY_LEN_BREDR); - else - err = -ENOTSUPP; + if (!lmp_bredr_capable(hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, + MGMT_STATUS_NOT_SUPPORTED); + mgmt_pending_remove(cmd); + goto failed; + } + + err = hci_do_inquiry(hdev, INQUIRY_LEN_BREDR); break; case DISCOV_TYPE_LE: - if (lmp_host_le_capable(hdev)) - err = hci_le_scan(hdev, LE_SCAN_TYPE, LE_SCAN_INT, - LE_SCAN_WIN, LE_SCAN_TIMEOUT_LE_ONLY); - else - err = -ENOTSUPP; + if (!lmp_host_le_capable(hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, + MGMT_STATUS_NOT_SUPPORTED); + mgmt_pending_remove(cmd); + goto failed; + } + + err = hci_le_scan(hdev, LE_SCAN_TYPE, LE_SCAN_INT, + LE_SCAN_WIN, LE_SCAN_TIMEOUT_LE_ONLY); break; case DISCOV_TYPE_INTERLEAVED: - if (lmp_host_le_capable(hdev) && lmp_bredr_capable(hdev)) - err = hci_le_scan(hdev, LE_SCAN_TYPE, LE_SCAN_INT, - LE_SCAN_WIN, - LE_SCAN_TIMEOUT_BREDR_LE); - else - err = -ENOTSUPP; + if (!lmp_host_le_capable(hdev) || !lmp_bredr_capable(hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, + MGMT_STATUS_NOT_SUPPORTED); + mgmt_pending_remove(cmd); + goto failed; + } + + err = hci_le_scan(hdev, LE_SCAN_TYPE, LE_SCAN_INT, LE_SCAN_WIN, + LE_SCAN_TIMEOUT_BREDR_LE); break; default: - err = -EINVAL; + err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, + MGMT_STATUS_INVALID_PARAMS); + mgmt_pending_remove(cmd); + goto failed; } if (err < 0) -- cgit v0.10.2 From a1d704509d5b96756d3d4cfb7f10a555efeadb87 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 9 Jan 2013 15:29:40 +0200 Subject: Bluetooth: Fix sending incorrect new_settings for mgmt_set_powered The socket from which a mgmt_set_powered command was received should only receive the command response but no new_settings event. The mgmt_powered() function which is used to handle the situation with the HCI_AUTO_OFF flag tries to check for a pending command to know which socket to skip the event for, but since the pending command hasn't been added this will not happen. This patch fixes the issue by adding the pending command for the HCI_AUTO_OFF case and thereby ensures that mgmt_powered() will skip the right socket when sending the new_settings event, but still send the proper response to the socket where the command came from. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index b1b0a36..37add53 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -787,8 +787,9 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data, cancel_delayed_work(&hdev->power_off); if (cp->val) { - err = send_settings_rsp(sk, MGMT_OP_SET_POWERED, hdev); - mgmt_powered(hdev, 1); + mgmt_pending_add(sk, MGMT_OP_SET_POWERED, hdev, + data, len); + err = mgmt_powered(hdev, 1); goto failed; } } -- cgit v0.10.2 From 52e0b011e29f36bc5c02ea3adbf4d864a38373de Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 10 Jan 2013 06:06:29 -0200 Subject: Bluetooth: Fix uuid output in debugfs The uuid should be printed in the CPU endianness and not in little-endian. Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index 55cceee..23b4e24 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -2,6 +2,7 @@ #include #include +#include #include #include @@ -461,19 +462,18 @@ static const struct file_operations blacklist_fops = { static void print_bt_uuid(struct seq_file *f, u8 *uuid) { - __be32 data0, data4; - __be16 data1, data2, data3, data5; + u32 data0, data5; + u16 data1, data2, data3, data4; - memcpy(&data0, &uuid[0], 4); - memcpy(&data1, &uuid[4], 2); - memcpy(&data2, &uuid[6], 2); - memcpy(&data3, &uuid[8], 2); - memcpy(&data4, &uuid[10], 4); - memcpy(&data5, &uuid[14], 2); + data5 = get_unaligned_le32(uuid); + data4 = get_unaligned_le16(uuid + 4); + data3 = get_unaligned_le16(uuid + 6); + data2 = get_unaligned_le16(uuid + 8); + data1 = get_unaligned_le16(uuid + 10); + data0 = get_unaligned_le32(uuid + 12); - seq_printf(f, "%.8x-%.4x-%.4x-%.4x-%.8x%.4x\n", - ntohl(data0), ntohs(data1), ntohs(data2), ntohs(data3), - ntohl(data4), ntohs(data5)); + seq_printf(f, "%.8x-%.4x-%.4x-%.4x-%.4x%.8x\n", + data0, data1, data2, data3, data4, data5); } static int uuids_show(struct seq_file *f, void *p) -- cgit v0.10.2 From 2efd32ee1b60b0b31404ca47c1ce70e5a5d24ebc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Jan 2013 08:32:45 +0000 Subject: veth: fix a NULL deref in netif_carrier_off In commit d0e2c55e7c94 (veth: avoid a NULL deref in veth_stats_one) we now clear the peer pointers in veth_dellink() veth_close() must therefore make sure the peer pointer is set. Reported-by: Tom Parkin Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 0f71a4f..e1da42a 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -206,9 +206,11 @@ static int veth_open(struct net_device *dev) static int veth_close(struct net_device *dev) { struct veth_priv *priv = netdev_priv(dev); + struct net_device *peer = rtnl_dereference(priv->peer); netif_carrier_off(dev); - netif_carrier_off(rtnl_dereference(priv->peer)); + if (peer) + netif_carrier_off(peer); return 0; } -- cgit v0.10.2 From 238268503f306cdc435eff2181e38c08ce412ed5 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Wed, 9 Jan 2013 07:04:35 +0000 Subject: bnx2x: align define usage to satisfy static checkers Static checkers complained that the E1H_FUNC_MAX define is used incorrectly in bnx2x_pretend_func(). The complaint was justified, although its not a real bug, as the first part of the conditional protects us in this case (a real bug would happen if a VF tried to use the pretend func, but there are no VFs in E1H chips). Reported-by: Dan Carpenter Signed-off-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c6a2089..a296758 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13360,7 +13360,7 @@ int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) { u32 pretend_reg; - if (CHIP_IS_E1H(bp) && pretend_func_val > E1H_FUNC_MAX) + if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX) return -1; /* get my own pretend register */ -- cgit v0.10.2 From 3d55b323709661df34d93e4cdcc5337620e34dfd Mon Sep 17 00:00:00 2001 From: Vijay Subramanian Date: Wed, 9 Jan 2013 12:21:30 +0000 Subject: doc: Clarify behavior when sysctl tcp_ecn = 1 Recent commit (commit 7e3a2dc52953 doc: make the description of how tcp_ecn works more explicit and clear ) clarified the behavior of tcp_ecn sysctl variable but description is inconsistent. When requested by incoming conections, ECN is enabled with not just tcp_ecn = 2 but also with tcp_ecn = 1. This patch makes it clear that with tcp_ecn = 1, ECN is enabled when requested by incoming connections. Also fix spelling of 'incoming'. Signed-off-by: Vijay Subramanian Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index dd52d51..51dcd52 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -214,8 +214,9 @@ tcp_ecn - INTEGER congestion before having to drop packets. Possible values are: 0 Disable ECN. Neither initiate nor accept ECN. - 1 Always request ECN on outgoing connection attempts. - 2 Enable ECN when requested by incomming connections + 1 Enable ECN when requested by incoming connections and + also request ECN on outgoing connection attempts. + 2 Enable ECN when requested by incoming connections but do not request ECN on outgoing connections. Default: 2 -- cgit v0.10.2 From 1def9238d4aa2146924994aa4b7dc861f03b9362 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Jan 2013 12:36:42 +0000 Subject: net_sched: more precise pkt_len computation One long standing problem with TSO/GSO/GRO packets is that skb->len doesn't represent a precise amount of bytes on wire. Headers are only accounted for the first segment. For TCP, thats typically 66 bytes per 1448 bytes segment missing, an error of 4.5 % for normal MSS value. As consequences : 1) TBF/CBQ/HTB/NETEM/... can send more bytes than the assigned limits. 2) Device stats are slightly under estimated as well. Fix this by taking account of headers in qdisc_skb_cb(skb)->pkt_len computation. Packet schedulers should use qdisc pkt_len instead of skb->len for their bandwidth limitations, and TSO enabled devices drivers could use pkt_len if their statistics are not hardware assisted, and if they don't scratch skb->cb[] first word. Both egress and ingress paths work, thanks to commit fda55eca5a (net: introduce skb_transport_header_was_set()) : If GRO built a GSO packet, it also set the transport header for us. Signed-off-by: Eric Dumazet Cc: Jamal Hadi Salim Cc: Stephen Hemminger Cc: Paolo Valente Cc: Herbert Xu Cc: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 594830e..4794cae 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2532,6 +2532,26 @@ struct netdev_queue *netdev_pick_tx(struct net_device *dev, return netdev_get_tx_queue(dev, queue_index); } +static void qdisc_pkt_len_init(struct sk_buff *skb) +{ + const struct skb_shared_info *shinfo = skb_shinfo(skb); + + qdisc_skb_cb(skb)->pkt_len = skb->len; + + /* To get more precise estimation of bytes sent on wire, + * we add to pkt_len the headers size of all segments + */ + if (shinfo->gso_size) { + unsigned int hdr_len = skb_transport_offset(skb); + + if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) + hdr_len += tcp_hdrlen(skb); + else + hdr_len += sizeof(struct udphdr); + qdisc_skb_cb(skb)->pkt_len += (shinfo->gso_segs - 1) * hdr_len; + } +} + static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q, struct net_device *dev, struct netdev_queue *txq) @@ -2540,7 +2560,7 @@ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q, bool contended; int rc; - qdisc_skb_cb(skb)->pkt_len = skb->len; + qdisc_pkt_len_init(skb); qdisc_calculate_pkt_len(skb, q); /* * Heuristic to force contended enqueues to serialize on a -- cgit v0.10.2 From c10d73671ad30f54692f7f69f0e09e75d3a8926a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Jan 2013 15:26:34 -0800 Subject: softirq: reduce latencies In various network workloads, __do_softirq() latencies can be up to 20 ms if HZ=1000, and 200 ms if HZ=100. This is because we iterate 10 times in the softirq dispatcher, and some actions can consume a lot of cycles. This patch changes the fallback to ksoftirqd condition to : - A time limit of 2 ms. - need_resched() being set on current task When one of this condition is met, we wakeup ksoftirqd for further softirq processing if we still have pending softirqs. Using need_resched() as the only condition can trigger RCU stalls, as we can keep BH disabled for too long. I ran several benchmarks and got no significant difference in throughput, but a very significant reduction of latencies (one order of magnitude) : In following bench, 200 antagonist "netperf -t TCP_RR" are started in background, using all available cpus. Then we start one "netperf -t TCP_RR", bound to the cpu handling the NIC IRQ (hard+soft) Before patch : # netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind RT_LATENCY=550110.424 MIN_LATENCY=146858 MAX_LATENCY=997109 P50_LATENCY=305000 P90_LATENCY=550000 P99_LATENCY=710000 MEAN_LATENCY=376989.12 STDDEV_LATENCY=184046.92 After patch : # netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind RT_LATENCY=40545.492 MIN_LATENCY=9834 MAX_LATENCY=78366 P50_LATENCY=33583 P90_LATENCY=59000 P99_LATENCY=69000 MEAN_LATENCY=38364.67 STDDEV_LATENCY=12865.26 Signed-off-by: Eric Dumazet Cc: David Miller Cc: Tom Herbert Cc: Ben Hutchings Signed-off-by: David S. Miller diff --git a/kernel/softirq.c b/kernel/softirq.c index ed567ba..47cb991 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -195,21 +195,21 @@ void local_bh_enable_ip(unsigned long ip) EXPORT_SYMBOL(local_bh_enable_ip); /* - * We restart softirq processing MAX_SOFTIRQ_RESTART times, - * and we fall back to softirqd after that. + * We restart softirq processing for at most 2 ms, + * and if need_resched() is not set. * - * This number has been established via experimentation. + * These limits have been established via experimentation. * The two things to balance is latency against fairness - * we want to handle softirqs as soon as possible, but they * should not be able to lock up the box. */ -#define MAX_SOFTIRQ_RESTART 10 +#define MAX_SOFTIRQ_TIME msecs_to_jiffies(2) asmlinkage void __do_softirq(void) { struct softirq_action *h; __u32 pending; - int max_restart = MAX_SOFTIRQ_RESTART; + unsigned long end = jiffies + MAX_SOFTIRQ_TIME; int cpu; unsigned long old_flags = current->flags; @@ -264,11 +264,12 @@ restart: local_irq_disable(); pending = local_softirq_pending(); - if (pending && --max_restart) - goto restart; + if (pending) { + if (time_before(jiffies, end) && !need_resched()) + goto restart; - if (pending) wakeup_softirqd(); + } lockdep_softirq_exit(); -- cgit v0.10.2 From 416186fbf8c5b4e4465a10c6ac7a45b6c47144b2 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 10 Jan 2013 08:56:51 +0000 Subject: net: Split core bits of netdev_pick_tx into __netdev_pick_tx This change splits the core bits of netdev_pick_tx into a separate function. The main idea behind this is to make this code accessible to select queue functions when they decide to process the standard path instead of their own custom path in their select queue routine. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0209ac3..608c3ac 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1403,6 +1403,7 @@ static inline void netdev_for_each_tx_queue(struct net_device *dev, extern struct netdev_queue *netdev_pick_tx(struct net_device *dev, struct sk_buff *skb); +extern u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb); /* * Net namespace inlines diff --git a/net/core/dev.c b/net/core/dev.c index 4794cae..81ff671 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2495,37 +2495,44 @@ static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb) #endif } -struct netdev_queue *netdev_pick_tx(struct net_device *dev, - struct sk_buff *skb) +u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb) { - int queue_index; - const struct net_device_ops *ops = dev->netdev_ops; - - if (dev->real_num_tx_queues == 1) - queue_index = 0; - else if (ops->ndo_select_queue) { - queue_index = ops->ndo_select_queue(dev, skb); - queue_index = dev_cap_txqueue(dev, queue_index); - } else { - struct sock *sk = skb->sk; - queue_index = sk_tx_queue_get(sk); + struct sock *sk = skb->sk; + int queue_index = sk_tx_queue_get(sk); - if (queue_index < 0 || skb->ooo_okay || - queue_index >= dev->real_num_tx_queues) { - int old_index = queue_index; + if (queue_index < 0 || skb->ooo_okay || + queue_index >= dev->real_num_tx_queues) { + int new_index = get_xps_queue(dev, skb); + if (new_index < 0) + new_index = skb_tx_hash(dev, skb); - queue_index = get_xps_queue(dev, skb); - if (queue_index < 0) - queue_index = skb_tx_hash(dev, skb); - - if (queue_index != old_index && sk) { - struct dst_entry *dst = + if (queue_index != new_index && sk) { + struct dst_entry *dst = rcu_dereference_check(sk->sk_dst_cache, 1); - if (dst && skb_dst(skb) == dst) - sk_tx_queue_set(sk, queue_index); - } + if (dst && skb_dst(skb) == dst) + sk_tx_queue_set(sk, queue_index); + } + + queue_index = new_index; + } + + return queue_index; +} + +struct netdev_queue *netdev_pick_tx(struct net_device *dev, + struct sk_buff *skb) +{ + int queue_index = 0; + + if (dev->real_num_tx_queues != 1) { + const struct net_device_ops *ops = dev->netdev_ops; + if (ops->ndo_select_queue) + queue_index = ops->ndo_select_queue(dev, skb); + else + queue_index = __netdev_pick_tx(dev, skb); + queue_index = dev_cap_txqueue(dev, queue_index); } skb_set_queue_mapping(skb, queue_index); -- cgit v0.10.2 From 537c00de1c9ba9876b91d869e84caceefe2b8bf9 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 10 Jan 2013 08:57:02 +0000 Subject: net: Add functions netif_reset_xps_queue and netif_set_xps_queue This patch adds two functions, netif_reset_xps_queue and netif_set_xps_queue. The main idea behind these two functions is to provide a mechanism through which drivers can update their defaults in regards to XPS. Currently no such mechanism exists and as a result we cannot use XPS for things such as ATR which would require a basic configuration to start in which the Tx queues are mapped to CPUs via a 1:1 mapping. With this change I am making it possible for drivers such as ixgbe to be able to use the XPS feature by controlling the default configuration. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 608c3ac..59fe9da 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2103,6 +2103,19 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index) __netif_schedule(txq->qdisc); } +#ifdef CONFIG_XPS +extern void netif_reset_xps_queue(struct net_device *dev, u16 index); +extern int netif_set_xps_queue(struct net_device *dev, struct cpumask *mask, + u16 index); +#else +static inline int netif_set_xps_queue(struct net_device *dev, + struct cpumask *mask, + u16 index) +{ + return 0; +} +#endif + /* * Returns a Tx hash for the given packet when dev->real_num_tx_queues is used * as a distribution range limit for the returned value. diff --git a/net/core/dev.c b/net/core/dev.c index 81ff671..257b295 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1857,6 +1857,161 @@ static void netif_setup_tc(struct net_device *dev, unsigned int txq) } } +#ifdef CONFIG_XPS +static DEFINE_MUTEX(xps_map_mutex); +#define xmap_dereference(P) \ + rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex)) + +void netif_reset_xps_queue(struct net_device *dev, u16 index) +{ + struct xps_dev_maps *dev_maps; + struct xps_map *map; + int i, pos, nonempty = 0; + + mutex_lock(&xps_map_mutex); + dev_maps = xmap_dereference(dev->xps_maps); + + if (!dev_maps) + goto out_no_maps; + + for_each_possible_cpu(i) { + map = xmap_dereference(dev_maps->cpu_map[i]); + if (!map) + continue; + + for (pos = 0; pos < map->len; pos++) + if (map->queues[pos] == index) + break; + + if (pos < map->len) { + if (map->len > 1) { + map->queues[pos] = map->queues[--map->len]; + } else { + RCU_INIT_POINTER(dev_maps->cpu_map[i], NULL); + kfree_rcu(map, rcu); + map = NULL; + } + } + if (map) + nonempty = 1; + } + + if (!nonempty) { + RCU_INIT_POINTER(dev->xps_maps, NULL); + kfree_rcu(dev_maps, rcu); + } + +out_no_maps: + mutex_unlock(&xps_map_mutex); +} + +int netif_set_xps_queue(struct net_device *dev, struct cpumask *mask, u16 index) +{ + int i, cpu, pos, map_len, alloc_len, need_set; + struct xps_map *map, *new_map; + struct xps_dev_maps *dev_maps, *new_dev_maps; + int nonempty = 0; + int numa_node_id = -2; + int maps_sz = max_t(unsigned int, XPS_DEV_MAPS_SIZE, L1_CACHE_BYTES); + + new_dev_maps = kzalloc(maps_sz, GFP_KERNEL); + if (!new_dev_maps) + return -ENOMEM; + + mutex_lock(&xps_map_mutex); + + dev_maps = xmap_dereference(dev->xps_maps); + + for_each_possible_cpu(cpu) { + map = dev_maps ? + xmap_dereference(dev_maps->cpu_map[cpu]) : NULL; + new_map = map; + if (map) { + for (pos = 0; pos < map->len; pos++) + if (map->queues[pos] == index) + break; + map_len = map->len; + alloc_len = map->alloc_len; + } else + pos = map_len = alloc_len = 0; + + need_set = cpumask_test_cpu(cpu, mask) && cpu_online(cpu); +#ifdef CONFIG_NUMA + if (need_set) { + if (numa_node_id == -2) + numa_node_id = cpu_to_node(cpu); + else if (numa_node_id != cpu_to_node(cpu)) + numa_node_id = -1; + } +#endif + if (need_set && pos >= map_len) { + /* Need to add queue to this CPU's map */ + if (map_len >= alloc_len) { + alloc_len = alloc_len ? + 2 * alloc_len : XPS_MIN_MAP_ALLOC; + new_map = kzalloc_node(XPS_MAP_SIZE(alloc_len), + GFP_KERNEL, + cpu_to_node(cpu)); + if (!new_map) + goto error; + new_map->alloc_len = alloc_len; + for (i = 0; i < map_len; i++) + new_map->queues[i] = map->queues[i]; + new_map->len = map_len; + } + new_map->queues[new_map->len++] = index; + } else if (!need_set && pos < map_len) { + /* Need to remove queue from this CPU's map */ + if (map_len > 1) + new_map->queues[pos] = + new_map->queues[--new_map->len]; + else + new_map = NULL; + } + RCU_INIT_POINTER(new_dev_maps->cpu_map[cpu], new_map); + } + + /* Cleanup old maps */ + for_each_possible_cpu(cpu) { + map = dev_maps ? + xmap_dereference(dev_maps->cpu_map[cpu]) : NULL; + if (map && xmap_dereference(new_dev_maps->cpu_map[cpu]) != map) + kfree_rcu(map, rcu); + if (new_dev_maps->cpu_map[cpu]) + nonempty = 1; + } + + if (nonempty) { + rcu_assign_pointer(dev->xps_maps, new_dev_maps); + } else { + kfree(new_dev_maps); + RCU_INIT_POINTER(dev->xps_maps, NULL); + } + + if (dev_maps) + kfree_rcu(dev_maps, rcu); + + netdev_queue_numa_node_write(netdev_get_tx_queue(dev, index), + (numa_node_id >= 0) ? numa_node_id : + NUMA_NO_NODE); + + mutex_unlock(&xps_map_mutex); + + return 0; +error: + mutex_unlock(&xps_map_mutex); + + if (new_dev_maps) + for_each_possible_cpu(i) + kfree(rcu_dereference_protected( + new_dev_maps->cpu_map[i], + 1)); + kfree(new_dev_maps); + return -ENOMEM; +} +EXPORT_SYMBOL(netif_set_xps_queue); + +#endif /* * Routine to help set real_num_tx_queues. To avoid skbs mapped to queues * greater then real_num_tx_queues stale skbs on the qdisc must be flushed. diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 29c884a..5ad489d 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -1002,54 +1002,14 @@ static ssize_t show_xps_map(struct netdev_queue *queue, return len; } -static DEFINE_MUTEX(xps_map_mutex); -#define xmap_dereference(P) \ - rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex)) - static void xps_queue_release(struct netdev_queue *queue) { struct net_device *dev = queue->dev; - struct xps_dev_maps *dev_maps; - struct xps_map *map; unsigned long index; - int i, pos, nonempty = 0; index = get_netdev_queue_index(queue); - mutex_lock(&xps_map_mutex); - dev_maps = xmap_dereference(dev->xps_maps); - - if (dev_maps) { - for_each_possible_cpu(i) { - map = xmap_dereference(dev_maps->cpu_map[i]); - if (!map) - continue; - - for (pos = 0; pos < map->len; pos++) - if (map->queues[pos] == index) - break; - - if (pos < map->len) { - if (map->len > 1) - map->queues[pos] = - map->queues[--map->len]; - else { - RCU_INIT_POINTER(dev_maps->cpu_map[i], - NULL); - kfree_rcu(map, rcu); - map = NULL; - } - } - if (map) - nonempty = 1; - } - - if (!nonempty) { - RCU_INIT_POINTER(dev->xps_maps, NULL); - kfree_rcu(dev_maps, rcu); - } - } - mutex_unlock(&xps_map_mutex); + netif_reset_xps_queue(dev, index); } static ssize_t store_xps_map(struct netdev_queue *queue, @@ -1057,13 +1017,9 @@ static ssize_t store_xps_map(struct netdev_queue *queue, const char *buf, size_t len) { struct net_device *dev = queue->dev; - cpumask_var_t mask; - int err, i, cpu, pos, map_len, alloc_len, need_set; unsigned long index; - struct xps_map *map, *new_map; - struct xps_dev_maps *dev_maps, *new_dev_maps; - int nonempty = 0; - int numa_node_id = -2; + cpumask_var_t mask; + int err; if (!capable(CAP_NET_ADMIN)) return -EPERM; @@ -1079,105 +1035,11 @@ static ssize_t store_xps_map(struct netdev_queue *queue, return err; } - new_dev_maps = kzalloc(max_t(unsigned int, - XPS_DEV_MAPS_SIZE, L1_CACHE_BYTES), GFP_KERNEL); - if (!new_dev_maps) { - free_cpumask_var(mask); - return -ENOMEM; - } - - mutex_lock(&xps_map_mutex); - - dev_maps = xmap_dereference(dev->xps_maps); - - for_each_possible_cpu(cpu) { - map = dev_maps ? - xmap_dereference(dev_maps->cpu_map[cpu]) : NULL; - new_map = map; - if (map) { - for (pos = 0; pos < map->len; pos++) - if (map->queues[pos] == index) - break; - map_len = map->len; - alloc_len = map->alloc_len; - } else - pos = map_len = alloc_len = 0; - - need_set = cpumask_test_cpu(cpu, mask) && cpu_online(cpu); -#ifdef CONFIG_NUMA - if (need_set) { - if (numa_node_id == -2) - numa_node_id = cpu_to_node(cpu); - else if (numa_node_id != cpu_to_node(cpu)) - numa_node_id = -1; - } -#endif - if (need_set && pos >= map_len) { - /* Need to add queue to this CPU's map */ - if (map_len >= alloc_len) { - alloc_len = alloc_len ? - 2 * alloc_len : XPS_MIN_MAP_ALLOC; - new_map = kzalloc_node(XPS_MAP_SIZE(alloc_len), - GFP_KERNEL, - cpu_to_node(cpu)); - if (!new_map) - goto error; - new_map->alloc_len = alloc_len; - for (i = 0; i < map_len; i++) - new_map->queues[i] = map->queues[i]; - new_map->len = map_len; - } - new_map->queues[new_map->len++] = index; - } else if (!need_set && pos < map_len) { - /* Need to remove queue from this CPU's map */ - if (map_len > 1) - new_map->queues[pos] = - new_map->queues[--new_map->len]; - else - new_map = NULL; - } - RCU_INIT_POINTER(new_dev_maps->cpu_map[cpu], new_map); - } - - /* Cleanup old maps */ - for_each_possible_cpu(cpu) { - map = dev_maps ? - xmap_dereference(dev_maps->cpu_map[cpu]) : NULL; - if (map && xmap_dereference(new_dev_maps->cpu_map[cpu]) != map) - kfree_rcu(map, rcu); - if (new_dev_maps->cpu_map[cpu]) - nonempty = 1; - } - - if (nonempty) { - rcu_assign_pointer(dev->xps_maps, new_dev_maps); - } else { - kfree(new_dev_maps); - RCU_INIT_POINTER(dev->xps_maps, NULL); - } - - if (dev_maps) - kfree_rcu(dev_maps, rcu); - - netdev_queue_numa_node_write(queue, (numa_node_id >= 0) ? numa_node_id : - NUMA_NO_NODE); - - mutex_unlock(&xps_map_mutex); + err = netif_set_xps_queue(dev, mask, index); free_cpumask_var(mask); - return len; -error: - mutex_unlock(&xps_map_mutex); - - if (new_dev_maps) - for_each_possible_cpu(i) - kfree(rcu_dereference_protected( - new_dev_maps->cpu_map[i], - 1)); - kfree(new_dev_maps); - free_cpumask_var(mask); - return -ENOMEM; + return err ? : len; } static struct netdev_queue_attribute xps_cpus_attribute = -- cgit v0.10.2 From 10cdc3f3cd541bfeaaf1c6e1710b1500ca19aa7f Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 10 Jan 2013 08:57:17 +0000 Subject: net: Rewrite netif_reset_xps_queue to allow for better code reuse This patch does a minor refactor on netif_reset_xps_queue to address a few items I noticed. First is the fact that we are doing removal of queues in both netif_reset_xps_queue and netif_set_xps_queue. Since there is no need to have the code in two places I am pushing it out into a separate function and will come back in another patch and reuse the code in netif_set_xps_queue. The second item this change addresses is the fact that the Tx queues were not getting their numa_node value cleared as a part of the XPS queue reset. This patch resolves that by resetting the numa_node value if the dev_maps value is set. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 257b295..231de87 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1862,45 +1862,55 @@ static DEFINE_MUTEX(xps_map_mutex); #define xmap_dereference(P) \ rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex)) -void netif_reset_xps_queue(struct net_device *dev, u16 index) +static struct xps_map *remove_xps_queue(struct xps_dev_maps *dev_maps, + int cpu, u16 index) { - struct xps_dev_maps *dev_maps; - struct xps_map *map; - int i, pos, nonempty = 0; - - mutex_lock(&xps_map_mutex); - dev_maps = xmap_dereference(dev->xps_maps); - - if (!dev_maps) - goto out_no_maps; + struct xps_map *map = NULL; + int pos; - for_each_possible_cpu(i) { - map = xmap_dereference(dev_maps->cpu_map[i]); - if (!map) - continue; - - for (pos = 0; pos < map->len; pos++) - if (map->queues[pos] == index) - break; + if (dev_maps) + map = xmap_dereference(dev_maps->cpu_map[cpu]); - if (pos < map->len) { + for (pos = 0; map && pos < map->len; pos++) { + if (map->queues[pos] == index) { if (map->len > 1) { map->queues[pos] = map->queues[--map->len]; } else { - RCU_INIT_POINTER(dev_maps->cpu_map[i], NULL); + RCU_INIT_POINTER(dev_maps->cpu_map[cpu], NULL); kfree_rcu(map, rcu); map = NULL; } + break; } - if (map) - nonempty = 1; } - if (!nonempty) { + return map; +} + +void netif_reset_xps_queue(struct net_device *dev, u16 index) +{ + struct xps_dev_maps *dev_maps; + int cpu; + bool active = false; + + mutex_lock(&xps_map_mutex); + dev_maps = xmap_dereference(dev->xps_maps); + + if (!dev_maps) + goto out_no_maps; + + for_each_possible_cpu(cpu) { + if (remove_xps_queue(dev_maps, cpu, index)) + active = true; + } + + if (!active) { RCU_INIT_POINTER(dev->xps_maps, NULL); kfree_rcu(dev_maps, rcu); } + netdev_queue_numa_node_write(netdev_get_tx_queue(dev, index), + NUMA_NO_NODE); out_no_maps: mutex_unlock(&xps_map_mutex); } -- cgit v0.10.2 From 01c5f864e62b1c1ee72fb492c6c5e47a162a507b Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 10 Jan 2013 08:57:35 +0000 Subject: net: Rewrite netif_set_xps_queues to address several issues This change is meant to address several issues I found within the netif_set_xps_queues function. If the allocation of one of the maps to be assigned to new_dev_maps failed we could end up with the device map in an inconsistent state since we had already worked through a number of CPUs and removed or added the queue. To address that I split the process into several steps. The first of which is just the allocation of updated maps for CPUs that will need larger maps to store the queue. By doing this we can fail gracefully without actually altering the contents of the current device map. The second issue I found was the fact that we were always allocating a new device map even if we were not adding any queues. I have updated the code so that we only allocate a new device map if we are adding queues, otherwise if we are not adding any queues to CPUs we just skip to the removal process. The last change I made was to reuse the code from remove_xps_queue to remove the queue from the CPU. By making this change we can be consistent in how we go about adding and removing the queues from the CPUs. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 231de87..41d5120 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1915,107 +1915,158 @@ out_no_maps: mutex_unlock(&xps_map_mutex); } +static struct xps_map *expand_xps_map(struct xps_map *map, + int cpu, u16 index) +{ + struct xps_map *new_map; + int alloc_len = XPS_MIN_MAP_ALLOC; + int i, pos; + + for (pos = 0; map && pos < map->len; pos++) { + if (map->queues[pos] != index) + continue; + return map; + } + + /* Need to add queue to this CPU's existing map */ + if (map) { + if (pos < map->alloc_len) + return map; + + alloc_len = map->alloc_len * 2; + } + + /* Need to allocate new map to store queue on this CPU's map */ + new_map = kzalloc_node(XPS_MAP_SIZE(alloc_len), GFP_KERNEL, + cpu_to_node(cpu)); + if (!new_map) + return NULL; + + for (i = 0; i < pos; i++) + new_map->queues[i] = map->queues[i]; + new_map->alloc_len = alloc_len; + new_map->len = pos; + + return new_map; +} + int netif_set_xps_queue(struct net_device *dev, struct cpumask *mask, u16 index) { - int i, cpu, pos, map_len, alloc_len, need_set; + struct xps_dev_maps *dev_maps, *new_dev_maps = NULL; struct xps_map *map, *new_map; - struct xps_dev_maps *dev_maps, *new_dev_maps; - int nonempty = 0; - int numa_node_id = -2; int maps_sz = max_t(unsigned int, XPS_DEV_MAPS_SIZE, L1_CACHE_BYTES); - - new_dev_maps = kzalloc(maps_sz, GFP_KERNEL); - if (!new_dev_maps) - return -ENOMEM; + int cpu, numa_node_id = -2; + bool active = false; mutex_lock(&xps_map_mutex); dev_maps = xmap_dereference(dev->xps_maps); + /* allocate memory for queue storage */ + for_each_online_cpu(cpu) { + if (!cpumask_test_cpu(cpu, mask)) + continue; + + if (!new_dev_maps) + new_dev_maps = kzalloc(maps_sz, GFP_KERNEL); + if (!new_dev_maps) + return -ENOMEM; + + map = dev_maps ? xmap_dereference(dev_maps->cpu_map[cpu]) : + NULL; + + map = expand_xps_map(map, cpu, index); + if (!map) + goto error; + + RCU_INIT_POINTER(new_dev_maps->cpu_map[cpu], map); + } + + if (!new_dev_maps) + goto out_no_new_maps; + for_each_possible_cpu(cpu) { - map = dev_maps ? - xmap_dereference(dev_maps->cpu_map[cpu]) : NULL; - new_map = map; - if (map) { - for (pos = 0; pos < map->len; pos++) - if (map->queues[pos] == index) - break; - map_len = map->len; - alloc_len = map->alloc_len; - } else - pos = map_len = alloc_len = 0; + if (cpumask_test_cpu(cpu, mask) && cpu_online(cpu)) { + /* add queue to CPU maps */ + int pos = 0; - need_set = cpumask_test_cpu(cpu, mask) && cpu_online(cpu); + map = xmap_dereference(new_dev_maps->cpu_map[cpu]); + while ((pos < map->len) && (map->queues[pos] != index)) + pos++; + + if (pos == map->len) + map->queues[map->len++] = index; #ifdef CONFIG_NUMA - if (need_set) { if (numa_node_id == -2) numa_node_id = cpu_to_node(cpu); else if (numa_node_id != cpu_to_node(cpu)) numa_node_id = -1; - } #endif - if (need_set && pos >= map_len) { - /* Need to add queue to this CPU's map */ - if (map_len >= alloc_len) { - alloc_len = alloc_len ? - 2 * alloc_len : XPS_MIN_MAP_ALLOC; - new_map = kzalloc_node(XPS_MAP_SIZE(alloc_len), - GFP_KERNEL, - cpu_to_node(cpu)); - if (!new_map) - goto error; - new_map->alloc_len = alloc_len; - for (i = 0; i < map_len; i++) - new_map->queues[i] = map->queues[i]; - new_map->len = map_len; - } - new_map->queues[new_map->len++] = index; - } else if (!need_set && pos < map_len) { - /* Need to remove queue from this CPU's map */ - if (map_len > 1) - new_map->queues[pos] = - new_map->queues[--new_map->len]; - else - new_map = NULL; + } else if (dev_maps) { + /* fill in the new device map from the old device map */ + map = xmap_dereference(dev_maps->cpu_map[cpu]); + RCU_INIT_POINTER(new_dev_maps->cpu_map[cpu], map); } - RCU_INIT_POINTER(new_dev_maps->cpu_map[cpu], new_map); + } + rcu_assign_pointer(dev->xps_maps, new_dev_maps); + /* Cleanup old maps */ - for_each_possible_cpu(cpu) { - map = dev_maps ? - xmap_dereference(dev_maps->cpu_map[cpu]) : NULL; - if (map && xmap_dereference(new_dev_maps->cpu_map[cpu]) != map) - kfree_rcu(map, rcu); - if (new_dev_maps->cpu_map[cpu]) - nonempty = 1; - } + if (dev_maps) { + for_each_possible_cpu(cpu) { + new_map = xmap_dereference(new_dev_maps->cpu_map[cpu]); + map = xmap_dereference(dev_maps->cpu_map[cpu]); + if (map && map != new_map) + kfree_rcu(map, rcu); + } - if (nonempty) { - rcu_assign_pointer(dev->xps_maps, new_dev_maps); - } else { - kfree(new_dev_maps); - RCU_INIT_POINTER(dev->xps_maps, NULL); + kfree_rcu(dev_maps, rcu); } - if (dev_maps) - kfree_rcu(dev_maps, rcu); + dev_maps = new_dev_maps; + active = true; +out_no_new_maps: + /* update Tx queue numa node */ netdev_queue_numa_node_write(netdev_get_tx_queue(dev, index), (numa_node_id >= 0) ? numa_node_id : NUMA_NO_NODE); + if (!dev_maps) + goto out_no_maps; + + /* removes queue from unused CPUs */ + for_each_possible_cpu(cpu) { + if (cpumask_test_cpu(cpu, mask) && cpu_online(cpu)) + continue; + + if (remove_xps_queue(dev_maps, cpu, index)) + active = true; + } + + /* free map if not active */ + if (!active) { + RCU_INIT_POINTER(dev->xps_maps, NULL); + kfree_rcu(dev_maps, rcu); + } + +out_no_maps: mutex_unlock(&xps_map_mutex); return 0; error: + /* remove any maps that we added */ + for_each_possible_cpu(cpu) { + new_map = xmap_dereference(new_dev_maps->cpu_map[cpu]); + map = dev_maps ? xmap_dereference(dev_maps->cpu_map[cpu]) : + NULL; + if (new_map && new_map != map) + kfree(new_map); + } + mutex_unlock(&xps_map_mutex); - if (new_dev_maps) - for_each_possible_cpu(i) - kfree(rcu_dereference_protected( - new_dev_maps->cpu_map[i], - 1)); kfree(new_dev_maps); return -ENOMEM; } -- cgit v0.10.2 From 024e9679a2daaa67642693366fb63a6b8c61b9f3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 10 Jan 2013 08:57:46 +0000 Subject: net: Add support for XPS without sysfs being defined This patch makes it so that we can support transmit packet steering without sysfs needing to be enabled. The reason for making this change is to make it so that a driver can make use of the XPS even while the sysfs portion of the interface is not present. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 59fe9da..aa7ad8a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2104,7 +2104,6 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index) } #ifdef CONFIG_XPS -extern void netif_reset_xps_queue(struct net_device *dev, u16 index); extern int netif_set_xps_queue(struct net_device *dev, struct cpumask *mask, u16 index); #else diff --git a/net/Kconfig b/net/Kconfig index 30b48f5..3cc5be0 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -232,7 +232,7 @@ config RFS_ACCEL config XPS boolean - depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS + depends on SMP && USE_GENERIC_SMP_HELPERS default y config NETPRIO_CGROUP diff --git a/net/core/dev.c b/net/core/dev.c index 41d5120..95de4c0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1887,10 +1887,10 @@ static struct xps_map *remove_xps_queue(struct xps_dev_maps *dev_maps, return map; } -void netif_reset_xps_queue(struct net_device *dev, u16 index) +static void netif_reset_xps_queues_gt(struct net_device *dev, u16 index) { struct xps_dev_maps *dev_maps; - int cpu; + int cpu, i; bool active = false; mutex_lock(&xps_map_mutex); @@ -1900,7 +1900,11 @@ void netif_reset_xps_queue(struct net_device *dev, u16 index) goto out_no_maps; for_each_possible_cpu(cpu) { - if (remove_xps_queue(dev_maps, cpu, index)) + for (i = index; i < dev->num_tx_queues; i++) { + if (!remove_xps_queue(dev_maps, cpu, i)) + break; + } + if (i == dev->num_tx_queues) active = true; } @@ -1909,8 +1913,10 @@ void netif_reset_xps_queue(struct net_device *dev, u16 index) kfree_rcu(dev_maps, rcu); } - netdev_queue_numa_node_write(netdev_get_tx_queue(dev, index), - NUMA_NO_NODE); + for (i = index; i < dev->num_tx_queues; i++) + netdev_queue_numa_node_write(netdev_get_tx_queue(dev, i), + NUMA_NO_NODE); + out_no_maps: mutex_unlock(&xps_map_mutex); } @@ -2096,8 +2102,12 @@ int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq) if (dev->num_tc) netif_setup_tc(dev, txq); - if (txq < dev->real_num_tx_queues) + if (txq < dev->real_num_tx_queues) { qdisc_reset_all_tx_gt(dev, txq); +#ifdef CONFIG_XPS + netif_reset_xps_queues_gt(dev, txq); +#endif + } } dev->real_num_tx_queues = txq; @@ -5919,6 +5929,10 @@ static void rollback_registered_many(struct list_head *head) /* Remove entries from kobject tree */ netdev_unregister_kobject(dev); +#ifdef CONFIG_XPS + /* Remove XPS queueing entries */ + netif_reset_xps_queues_gt(dev, 0); +#endif } synchronize_net(); diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 5ad489d..a5b89a6 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -1002,16 +1002,6 @@ static ssize_t show_xps_map(struct netdev_queue *queue, return len; } -static void xps_queue_release(struct netdev_queue *queue) -{ - struct net_device *dev = queue->dev; - unsigned long index; - - index = get_netdev_queue_index(queue); - - netif_reset_xps_queue(dev, index); -} - static ssize_t store_xps_map(struct netdev_queue *queue, struct netdev_queue_attribute *attribute, const char *buf, size_t len) @@ -1058,10 +1048,6 @@ static void netdev_queue_release(struct kobject *kobj) { struct netdev_queue *queue = to_netdev_queue(kobj); -#ifdef CONFIG_XPS - xps_queue_release(queue); -#endif - memset(kobj, 0, sizeof(*kobj)); dev_put(queue->dev); } -- cgit v0.10.2 From 17e1a42f2e377ec5809af79eb651d9ed5958fb97 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 11 Jan 2013 09:57:33 +0300 Subject: tg3: missing break statement in tg3_get_5720_nvram_info() There is a missing break statement so FLASH_5762_EEPROM_HD gets treated like FLASH_5762_EEPROM_LD. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index b7696eb..88f2d41 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -13726,8 +13726,10 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) switch (nvmpinstrp) { case FLASH_5762_EEPROM_HD: nvmpinstrp = FLASH_5720_EEPROM_HD; + break; case FLASH_5762_EEPROM_LD: nvmpinstrp = FLASH_5720_EEPROM_LD; + break; } } -- cgit v0.10.2 From 75e6934a9e996ee7cfe7a488b7f7cc2baa86717a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Jan 2013 12:32:37 +0100 Subject: mac80211: fix HT40 connections My commit 4bf88530be971bf95a7830ca61b4120980bf4347 ("mac80211: convert to channel definition struct") accidentally broke HT40 connections due to swapped channel flag checks -- fix that. Reported-by: Sujith Manoharan Tested-by: Sujith Manoharan Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d90c07b1..e930175 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -199,11 +199,11 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, case NL80211_CHAN_WIDTH_40: if (sdata->vif.bss_conf.chandef.chan->center_freq > sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40PLUS) + chan->flags & IEEE80211_CHAN_NO_HT40MINUS) disable_40 = true; if (sdata->vif.bss_conf.chandef.chan->center_freq < sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40MINUS) + chan->flags & IEEE80211_CHAN_NO_HT40PLUS) disable_40 = true; break; default: -- cgit v0.10.2 From 55b183ad8635589ea731a31653de79a2626491c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Jan 2013 14:22:58 +0100 Subject: wireless: fix regulatory HT40 allowed check commit 1a9193185f462a51815fe48491f8a6fb6b942551 "regulatory: code cleanup" changed is_ht40_allowed without considering that IEEE80211_CHAN_NO_HT40 is not just one flag, but two. This is causing HT40- to be blocked completely. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 8c114e8..6ea626b 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1123,7 +1123,9 @@ static bool is_ht40_allowed(struct ieee80211_channel *chan) if (chan->flags & IEEE80211_CHAN_DISABLED) return false; /* This would happen when regulatory rules disallow HT40 completely */ - return !(chan->flags & IEEE80211_CHAN_NO_HT40); + if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40) + return false; + return true; } static void reg_process_ht_flags_channel(struct wiphy *wiphy, -- cgit v0.10.2 From fad2e371bb5a9f64dced90309fa7cb8bce09e92f Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 11 Jan 2013 14:48:48 +0100 Subject: NFC: Avoid memcpy on LLCP connection less Rx path We can cast msg_name to a sockaddr_nfc_llcp pointer directly. Signed-off-by: Samuel Ortiz diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 12ec487..463231b 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -682,17 +682,17 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, if (sk->sk_type == SOCK_DGRAM && msg->msg_name) { struct nfc_llcp_ui_cb *ui_cb = nfc_llcp_ui_skb_cb(skb); - struct sockaddr_nfc_llcp sockaddr; + struct sockaddr_nfc_llcp *sockaddr = + (struct sockaddr_nfc_llcp *) msg->msg_name; - pr_debug("Datagram socket %d %d\n", ui_cb->dsap, ui_cb->ssap); + msg->msg_namelen = sizeof(struct sockaddr_nfc_llcp); - sockaddr.sa_family = AF_NFC; - sockaddr.nfc_protocol = NFC_PROTO_NFC_DEP; - sockaddr.dsap = ui_cb->dsap; - sockaddr.ssap = ui_cb->ssap; + pr_debug("Datagram socket %d %d\n", ui_cb->dsap, ui_cb->ssap); - memcpy(msg->msg_name, &sockaddr, sizeof(sockaddr)); - msg->msg_namelen = sizeof(sockaddr); + sockaddr->sa_family = AF_NFC; + sockaddr->nfc_protocol = NFC_PROTO_NFC_DEP; + sockaddr->dsap = ui_cb->dsap; + sockaddr->ssap = ui_cb->ssap; } /* Mark read part of skb as used */ -- cgit v0.10.2 From fb97c3e80f99988079df4fb5f3c84aea4e7f806a Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 11 Jan 2013 14:54:22 +0100 Subject: NFC: Use skb_copy_datagram_iovec Safer and more robust than than memcpy_toiovec. Signed-off-by: Samuel Ortiz diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 463231b..5332751 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -672,7 +672,7 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, copied = min_t(unsigned int, rlen, len); cskb = skb; - if (memcpy_toiovec(msg->msg_iov, cskb->data, copied)) { + if (skb_copy_datagram_iovec(cskb, 0, msg->msg_iov, copied)) { if (!(flags & MSG_PEEK)) skb_queue_head(&sk->sk_receive_queue, skb); return -EFAULT; -- cgit v0.10.2 From 29b7d9ad9112a95757c8030421dc3bd1b28ad8b5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 6 Dec 2012 23:10:40 +0100 Subject: drivers/nfc/nfcwilink.c: use devm_kzalloc devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall Signed-off-by: John W. Linville diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index 50b1ee4..c7c182d 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -526,7 +526,7 @@ static int nfcwilink_probe(struct platform_device *pdev) nfc_dev_dbg(&pdev->dev, "probe entry"); - drv = kzalloc(sizeof(struct nfcwilink), GFP_KERNEL); + drv = devm_kzalloc(&pdev->dev, sizeof(struct nfcwilink), GFP_KERNEL); if (!drv) { rc = -ENOMEM; goto exit; @@ -547,7 +547,7 @@ static int nfcwilink_probe(struct platform_device *pdev) if (!drv->ndev) { nfc_dev_err(&pdev->dev, "nci_allocate_device failed"); rc = -ENOMEM; - goto free_exit; + goto exit; } nci_set_parent_dev(drv->ndev, &pdev->dev); @@ -566,9 +566,6 @@ static int nfcwilink_probe(struct platform_device *pdev) free_dev_exit: nci_free_device(drv->ndev); -free_exit: - kfree(drv); - exit: return rc; } @@ -588,8 +585,6 @@ static int nfcwilink_remove(struct platform_device *pdev) nci_unregister_device(ndev); nci_free_device(ndev); - kfree(drv); - dev_set_drvdata(&pdev->dev, NULL); return 0; -- cgit v0.10.2 From b66851c3c89629e72a2eaa54d1b838fb74dad644 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 7 Jan 2013 14:48:07 -0800 Subject: mac80211_hwsim: fix beacon timestamp and mactime Set the beacon timestamp once during "transmission" so the monitor interface also gets a timestamped beacon. Also use a common base between TX timestamp and RX mactime. This eliminates "TX" path delay, which shows up as a constant error in Toffset. Get the global TSF once before iterating over all RX HWs, so they all set a mactime with the same time base. Signed-off-by: Thomas Pedersen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b6e2caa..b73e497 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -363,6 +363,8 @@ struct mac80211_hwsim_data { /* difference between this hw's clock and the real clock, in usecs */ s64 tsf_offset; s64 bcn_delta; + /* absolute beacon transmission time. Used to cover up "tx" delay. */ + u64 abs_bcn_ts; }; @@ -410,15 +412,19 @@ static netdev_tx_t hwsim_mon_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } +static inline u64 mac80211_hwsim_get_tsf_raw(void) +{ + return ktime_to_us(ktime_get_real()); +} + static __le64 __mac80211_hwsim_get_tsf(struct mac80211_hwsim_data *data) { - struct timeval tv = ktime_to_timeval(ktime_get_real()); - u64 now = tv.tv_sec * USEC_PER_SEC + tv.tv_usec; + u64 now = mac80211_hwsim_get_tsf_raw(); return cpu_to_le64(now + data->tsf_offset); } static u64 mac80211_hwsim_get_tsf(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) + struct ieee80211_vif *vif) { struct mac80211_hwsim_data *data = hw->priv; return le64_to_cpu(__mac80211_hwsim_get_tsf(data)); @@ -705,7 +711,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rx_status rx_status; - struct ieee80211_rate *txrate = ieee80211_get_tx_rate(hw, info); + u64 now; memset(&rx_status, 0, sizeof(rx_status)); rx_status.flag |= RX_FLAG_MACTIME_START; @@ -731,11 +737,23 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, secpath_reset(skb); nf_reset(skb); + /* + * Get absolute mactime here so all HWs RX at the "same time", and + * absolute TX time for beacon mactime so the timestamp matches. + * Giving beacons a different mactime than non-beacons looks messy, but + * it helps the Toffset be exact and a ~10us mactime discrepancy + * probably doesn't really matter. + */ + if (ieee80211_is_beacon(hdr->frame_control) || + ieee80211_is_probe_resp(hdr->frame_control)) + now = data->abs_bcn_ts; + else + now = mac80211_hwsim_get_tsf_raw(); + /* Copy skb to all enabled radios that are on the current frequency */ spin_lock(&hwsim_radio_lock); list_for_each_entry(data2, &hwsim_radios, list) { struct sk_buff *nskb; - struct ieee80211_mgmt *mgmt; struct tx_iter_data tx_iter_data = { .receive = false, .channel = chan, @@ -787,17 +805,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, if (mac80211_hwsim_addr_match(data2, hdr->addr1)) ack = true; - /* set bcn timestamp relative to receiver mactime */ - rx_status.mactime = - le64_to_cpu(__mac80211_hwsim_get_tsf(data2)); - mgmt = (struct ieee80211_mgmt *) nskb->data; - if (ieee80211_is_beacon(mgmt->frame_control) || - ieee80211_is_probe_resp(mgmt->frame_control)) - mgmt->u.beacon.timestamp = cpu_to_le64( - rx_status.mactime + - (data->tsf_offset - data2->tsf_offset) + - 24 * 8 * 10 / txrate->bitrate); - + rx_status.mactime = now + data2->tsf_offset; #if 0 /* * Don't enable this code by default as the OUI 00:00:00 @@ -987,7 +995,11 @@ static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, struct ieee80211_vif *vif) { - struct ieee80211_hw *hw = arg; + struct mac80211_hwsim_data *data = arg; + struct ieee80211_hw *hw = data->hw; + struct ieee80211_tx_info *info; + struct ieee80211_rate *txrate; + struct ieee80211_mgmt *mgmt; struct sk_buff *skb; hwsim_check_magic(vif); @@ -1000,6 +1012,15 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, skb = ieee80211_beacon_get(hw, vif); if (skb == NULL) return; + info = IEEE80211_SKB_CB(skb); + txrate = ieee80211_get_tx_rate(hw, info); + + mgmt = (struct ieee80211_mgmt *) skb->data; + /* fake header transmission time */ + data->abs_bcn_ts = mac80211_hwsim_get_tsf_raw(); + mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts + + data->tsf_offset + + 24 * 8 * 10 / txrate->bitrate); mac80211_hwsim_tx_frame(hw, skb, rcu_dereference(vif->chanctx_conf)->def.chan); @@ -1020,7 +1041,7 @@ mac80211_hwsim_beacon(struct hrtimer *timer) ieee80211_iterate_active_interfaces_atomic( hw, IEEE80211_IFACE_ITER_NORMAL, - mac80211_hwsim_beacon_tx, hw); + mac80211_hwsim_beacon_tx, data); /* beacon at new TBTT + beacon interval */ if (data->bcn_delta) { -- cgit v0.10.2 From 590152789121640bfccb2d155458819951771363 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 10 Jan 2013 10:11:37 +0100 Subject: ssb: add database of serial flash memories MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c index 8662697..720665c 100644 --- a/drivers/ssb/driver_chipcommon_sflash.c +++ b/drivers/ssb/driver_chipcommon_sflash.c @@ -9,9 +9,131 @@ #include "ssb_private.h" +struct ssb_sflash_tbl_e { + char *name; + u32 id; + u32 blocksize; + u16 numblocks; +}; + +static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { + { "M25P20", 0x11, 0x10000, 4, }, + { "M25P40", 0x12, 0x10000, 8, }, + + { "M25P16", 0x14, 0x10000, 32, }, + { "M25P32", 0x15, 0x10000, 64, }, + { "M25P64", 0x16, 0x10000, 128, }, + { "M25FL128", 0x17, 0x10000, 256, }, + { 0 }, +}; + +static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { + { "SST25WF512", 1, 0x1000, 16, }, + { "SST25VF512", 0x48, 0x1000, 16, }, + { "SST25WF010", 2, 0x1000, 32, }, + { "SST25VF010", 0x49, 0x1000, 32, }, + { "SST25WF020", 3, 0x1000, 64, }, + { "SST25VF020", 0x43, 0x1000, 64, }, + { "SST25WF040", 4, 0x1000, 128, }, + { "SST25VF040", 0x44, 0x1000, 128, }, + { "SST25VF040B", 0x8d, 0x1000, 128, }, + { "SST25WF080", 5, 0x1000, 256, }, + { "SST25VF080B", 0x8e, 0x1000, 256, }, + { "SST25VF016", 0x41, 0x1000, 512, }, + { "SST25VF032", 0x4a, 0x1000, 1024, }, + { "SST25VF064", 0x4b, 0x1000, 2048, }, + { 0 }, +}; + +static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { + { "AT45DB011", 0xc, 256, 512, }, + { "AT45DB021", 0x14, 256, 1024, }, + { "AT45DB041", 0x1c, 256, 2048, }, + { "AT45DB081", 0x24, 256, 4096, }, + { "AT45DB161", 0x2c, 512, 4096, }, + { "AT45DB321", 0x34, 512, 8192, }, + { "AT45DB642", 0x3c, 1024, 8192, }, + { 0 }, +}; + +static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) +{ + int i; + chipco_write32(cc, SSB_CHIPCO_FLASHCTL, + SSB_CHIPCO_FLASHCTL_START | opcode); + for (i = 0; i < 1000; i++) { + if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) & + SSB_CHIPCO_FLASHCTL_BUSY)) + return; + cpu_relax(); + } + pr_err("SFLASH control command failed (timeout)!\n"); +} + /* Initialize serial flash access */ int ssb_sflash_init(struct ssb_chipcommon *cc) { + struct ssb_sflash_tbl_e *e; + u32 id, id2; + + switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { + case SSB_CHIPCO_FLASHT_STSER: + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); + + chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); + id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); + + chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); + id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); + + switch (id) { + case 0xbf: + for (e = ssb_sflash_sst_tbl; e->name; e++) { + if (e->id == id2) + break; + } + break; + case 0x13: + return -ENOTSUPP; + default: + for (e = ssb_sflash_st_tbl; e->name; e++) { + if (e->id == id) + break; + } + break; + } + if (!e->name) { + pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", + id, id2); + return -ENOTSUPP; + } + + break; + case SSB_CHIPCO_FLASHT_ATSER: + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); + id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; + + for (e = ssb_sflash_at_tbl; e->name; e++) { + if (e->id == id) + break; + } + if (!e->name) { + pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", + id); + return -ENOTSUPP; + } + + break; + default: + pr_err("Unsupported flash type\n"); + return -ENOTSUPP; + } + + pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", + e->name, e->blocksize, e->numblocks); + pr_err("Serial flash support is not implemented yet!\n"); return -ENOTSUPP; -- cgit v0.10.2 From aad12ede97d62b290ac03f0077d05b999bbddd05 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 10 Jan 2013 11:45:14 +0100 Subject: ath9k: fix spectral scan endless mode on AR9002 There was a copy+paste error in ar9002 for the endless spectral mode, fix that. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 51b7c81..2cb665e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -581,7 +581,7 @@ void ar9002_hw_spectral_scan_config(struct ath_hw *ah, */ count = param->count; if (param->endless) - count = 0; + count = 0x80; else if (count & 0x80) count = 0x7f; -- cgit v0.10.2 From 1a2d50329832c4b5c77be569f20eec303a0d07b8 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 10 Jan 2013 17:52:38 +0100 Subject: bcma: fix compile error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This error was introduced in: commit e3f05a42faac627d8704c76c1927e09b22443b7b Author: Hauke Mehrtens Date: Fri Jan 4 00:51:21 2013 +0100 bcma: mips: explicit assign IRQ numbers CC drivers/bcma/driver_mips.o drivers/bcma/driver_mips.c: In function 'bcma_core_mips_init': drivers/bcma/driver_mips.c:302:4: error: implicit declaration of function 'bcma_core_irq' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[6]: *** [drivers/bcma/driver_mips.o] Error 1 Reported-by: Rafał Miłecki Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 8a51c79..90f20a2 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -299,7 +299,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) break; default: list_for_each_entry(core, &bus->cores, list) { - core->irq = bcma_core_irq(core); + core->irq = bcma_core_mips_irq(core) + 2; } bcma_err(bus, "Unknown device (0x%x) found, can not configure IRQs\n", -- cgit v0.10.2 From e2aa19fadd718d7dd920a3994118863861a4b61e Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Thu, 10 Jan 2013 17:54:09 +0100 Subject: bcma: return the mips irq number in bcma_core_irq The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c index 57981e4..b8ef965 100644 --- a/arch/mips/bcm47xx/serial.c +++ b/arch/mips/bcm47xx/serial.c @@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(void) p->mapbase = (unsigned int) bcma_port->regs; p->membase = (void *) bcma_port->regs; - p->irq = bcma_port->irq + 2; + p->irq = bcma_port->irq; p->uartclk = bcma_port->baud_base; p->regshift = bcma_port->reg_shift; p->iotype = UPIO_MEM; diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c index e461ad2..28fa50a 100644 --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c @@ -329,7 +329,7 @@ void bcma_chipco_serial_init(struct bcma_drv_cc *cc) return; } - irq = bcma_core_mips_irq(cc->core); + irq = bcma_core_irq(cc->core); /* Determine the registers of the UARTs */ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 90f20a2..a808404 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -85,7 +85,7 @@ static u32 bcma_core_mips_irqflag(struct bcma_device *dev) * If disabled, 5 is returned. * If not supported, 6 is returned. */ -unsigned int bcma_core_mips_irq(struct bcma_device *dev) +static unsigned int bcma_core_mips_irq(struct bcma_device *dev) { struct bcma_device *mdev = dev->bus->drv_mips.core; u32 irqflag; @@ -102,7 +102,13 @@ unsigned int bcma_core_mips_irq(struct bcma_device *dev) return 5; } -EXPORT_SYMBOL(bcma_core_mips_irq); + +unsigned int bcma_core_irq(struct bcma_device *dev) +{ + unsigned int mips_irq = bcma_core_mips_irq(dev); + return mips_irq <= 4 ? mips_irq + 2 : 0; +} +EXPORT_SYMBOL(bcma_core_irq); static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) { @@ -299,7 +305,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) break; default: list_for_each_entry(core, &bus->cores, list) { - core->irq = bcma_core_mips_irq(core) + 2; + core->irq = bcma_core_irq(core); } bcma_err(bus, "Unknown device (0x%x) found, can not configure IRQs\n", diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index e6b5c89..ef9f093 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -577,7 +577,7 @@ int bcma_core_pci_plat_dev_init(struct pci_dev *dev) pr_info("PCI: Fixing up device %s\n", pci_name(dev)); /* Fix up interrupt lines */ - dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; + dev->irq = bcma_core_irq(pc_host->pdev->core); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); return 0; @@ -596,6 +596,6 @@ int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); - return bcma_core_mips_irq(pc_host->pdev->core) + 2; + return bcma_core_irq(pc_host->pdev->core); } EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 6495579..73c7f4b 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -48,6 +48,6 @@ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); -extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); +extern unsigned int bcma_core_irq(struct bcma_device *core); #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ -- cgit v0.10.2 From eab6d7921d5704128c941d7cc647dacd4d50697c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 10 Jan 2013 19:41:52 +0100 Subject: ath9k_hw: add tx gain tables for newer devices Improves stability on affected devices and also fixes the Tx IQ calibration related regression on some AR9340 devices such as the TP-Link TL-WDR4300. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index 262e1e0..db5ffad 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -744,6 +744,186 @@ static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p2[][5] = { {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, }; +static const u32 ar9300Modes_mixed_ob_db_tx_gain_table_2p2[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1c000223, 0x1c000223, 0x11000400, 0x11000400}, + {0x0000a518, 0x21002220, 0x21002220, 0x15000402, 0x15000402}, + {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404}, + {0x0000a520, 0x2b022220, 0x2b022220, 0x1b000603, 0x1b000603}, + {0x0000a524, 0x2f022222, 0x2f022222, 0x1f000a02, 0x1f000a02}, + {0x0000a528, 0x34022225, 0x34022225, 0x23000a04, 0x23000a04}, + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x26000a20, 0x26000a20}, + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2a000e20, 0x2a000e20}, + {0x0000a534, 0x4202242a, 0x4202242a, 0x2e000e22, 0x2e000e22}, + {0x0000a538, 0x4702244a, 0x4702244a, 0x31000e24, 0x31000e24}, + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x34001640, 0x34001640}, + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x38001660, 0x38001660}, + {0x0000a544, 0x52022470, 0x52022470, 0x3b001861, 0x3b001861}, + {0x0000a548, 0x55022490, 0x55022490, 0x3e001a81, 0x3e001a81}, + {0x0000a54c, 0x59022492, 0x59022492, 0x42001a83, 0x42001a83}, + {0x0000a550, 0x5d022692, 0x5d022692, 0x44001c84, 0x44001c84}, + {0x0000a554, 0x61022892, 0x61022892, 0x48001ce3, 0x48001ce3}, + {0x0000a558, 0x65024890, 0x65024890, 0x4c001ce5, 0x4c001ce5}, + {0x0000a55c, 0x69024892, 0x69024892, 0x50001ce9, 0x50001ce9}, + {0x0000a560, 0x6e024c92, 0x6e024c92, 0x54001ceb, 0x54001ceb}, + {0x0000a564, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a568, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a56c, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a570, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a574, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a578, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a57c, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, + {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002}, + {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004}, + {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200}, + {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202}, + {0x0000a594, 0x1c800223, 0x1c800223, 0x11800400, 0x11800400}, + {0x0000a598, 0x21802220, 0x21802220, 0x15800402, 0x15800402}, + {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404}, + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1b800603, 0x1b800603}, + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x1f800a02, 0x1f800a02}, + {0x0000a5a8, 0x34822225, 0x34822225, 0x23800a04, 0x23800a04}, + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x26800a20, 0x26800a20}, + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2a800e20, 0x2a800e20}, + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x2e800e22, 0x2e800e22}, + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x31800e24, 0x31800e24}, + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x34801640, 0x34801640}, + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x38801660, 0x38801660}, + {0x0000a5c4, 0x52822470, 0x52822470, 0x3b801861, 0x3b801861}, + {0x0000a5c8, 0x55822490, 0x55822490, 0x3e801a81, 0x3e801a81}, + {0x0000a5cc, 0x59822492, 0x59822492, 0x42801a83, 0x42801a83}, + {0x0000a5d0, 0x5d822692, 0x5d822692, 0x44801c84, 0x44801c84}, + {0x0000a5d4, 0x61822892, 0x61822892, 0x48801ce3, 0x48801ce3}, + {0x0000a5d8, 0x65824890, 0x65824890, 0x4c801ce5, 0x4c801ce5}, + {0x0000a5dc, 0x69824892, 0x69824892, 0x50801ce9, 0x50801ce9}, + {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x54801ceb, 0x54801ceb}, + {0x0000a5e4, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5e8, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5ec, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5f0, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5f4, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5f8, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5fc, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000}, + {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501}, + {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501}, + {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, + {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x00016044, 0x012492d4, 0x012492d4, 0x056db2e4, 0x056db2e4}, + {0x00016048, 0x66480001, 0x66480001, 0x8e480001, 0x8e480001}, + {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016444, 0x012492d4, 0x012492d4, 0x056db2e4, 0x056db2e4}, + {0x00016448, 0x66480001, 0x66480001, 0x8e480001, 0x8e480001}, + {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016844, 0x012492d4, 0x012492d4, 0x056db2e4, 0x056db2e4}, + {0x00016848, 0x66480001, 0x66480001, 0x8e480001, 0x8e480001}, + {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, +}; + +static const u32 ar9300Modes_type5_tx_gain_table_2p2[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, + {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, + {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, + {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, + {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, + {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, + {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, + {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, + {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, + {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, + {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, + {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, + {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, + {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, + {0x0000a54c, 0x5e08442e, 0x5e08442e, 0x47001a83, 0x47001a83}, + {0x0000a550, 0x620a4431, 0x620a4431, 0x4a001c84, 0x4a001c84}, + {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, + {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, + {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, + {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, + {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, + {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, + {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, + {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016048, 0x65240001, 0x65240001, 0x66480001, 0x66480001}, + {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016448, 0x65240001, 0x65240001, 0x66480001, 0x66480001}, + {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016848, 0x65240001, 0x65240001, 0x66480001, 0x66480001}, + {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, +}; + static const u32 ar9300Common_rx_gain_table_2p2[][2] = { /* Addr allmodes */ {0x0000a000, 0x00010000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 74fd397..de8a56c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -507,28 +507,59 @@ static void ar9003_tx_gain_table_mode4(struct ath_hw *ah) else if (AR_SREV_9580(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9580_1p0_mixed_ob_db_tx_gain_table); + else + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9300Modes_mixed_ob_db_tx_gain_table_2p2); +} + +static void ar9003_tx_gain_table_mode5(struct ath_hw *ah) +{ + if (AR_SREV_9485_11(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9485Modes_green_ob_db_tx_gain_1_1); + else if (AR_SREV_9340(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9340Modes_ub124_tx_gain_table_1p0); + else if (AR_SREV_9580(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9580_1p0_type5_tx_gain_table); + else if (AR_SREV_9300_22(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9300Modes_type5_tx_gain_table_2p2); } +static void ar9003_tx_gain_table_mode6(struct ath_hw *ah) +{ + if (AR_SREV_9340(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9340Modes_low_ob_db_and_spur_tx_gain_table_1p0); + else if (AR_SREV_9485_11(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9485Modes_green_spur_ob_db_tx_gain_1_1); + else if (AR_SREV_9580(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9580_1p0_type6_tx_gain_table); +} + +typedef void (*ath_txgain_tab)(struct ath_hw *ah); + static void ar9003_tx_gain_table_apply(struct ath_hw *ah) { - switch (ar9003_hw_get_tx_gain_idx(ah)) { - case 0: - default: - ar9003_tx_gain_table_mode0(ah); - break; - case 1: - ar9003_tx_gain_table_mode1(ah); - break; - case 2: - ar9003_tx_gain_table_mode2(ah); - break; - case 3: - ar9003_tx_gain_table_mode3(ah); - break; - case 4: - ar9003_tx_gain_table_mode4(ah); - break; - } + static const ath_txgain_tab modes[] = { + ar9003_tx_gain_table_mode0, + ar9003_tx_gain_table_mode1, + ar9003_tx_gain_table_mode2, + ar9003_tx_gain_table_mode3, + ar9003_tx_gain_table_mode4, + ar9003_tx_gain_table_mode5, + ar9003_tx_gain_table_mode6, + }; + int idx = ar9003_hw_get_tx_gain_idx(ah); + + if (idx >= ARRAY_SIZE(modes)) + idx = 0; + + modes[idx](ah); } static void ar9003_rx_gain_table_mode0(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h index f69d292..25db921 100644 --- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h @@ -1172,6 +1172,106 @@ static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = { {0x00016448, 0x24925666, 0x24925666, 0x8e481266, 0x8e481266}, }; +static const u32 ar9340Modes_low_ob_db_and_spur_tx_gain_table_1p0[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03eaac5a, 0x03eaac5a}, + {0x0000a2e0, 0x0000f800, 0x0000f800, 0x03f330ac, 0x03f330ac}, + {0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03fc3f00, 0x03fc3f00}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ffc000, 0x03ffc000}, + {0x0000a394, 0x00000444, 0x00000444, 0x00000404, 0x00000404}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x02000001, 0x02000001}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x05000003, 0x05000003}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0a000005, 0x0a000005}, + {0x0000a510, 0x16000220, 0x16000220, 0x0e000201, 0x0e000201}, + {0x0000a514, 0x1c000223, 0x1c000223, 0x11000203, 0x11000203}, + {0x0000a518, 0x21002220, 0x21002220, 0x14000401, 0x14000401}, + {0x0000a51c, 0x27002223, 0x27002223, 0x18000403, 0x18000403}, + {0x0000a520, 0x2b022220, 0x2b022220, 0x1b000602, 0x1b000602}, + {0x0000a524, 0x2f022222, 0x2f022222, 0x1f000802, 0x1f000802}, + {0x0000a528, 0x34022225, 0x34022225, 0x21000620, 0x21000620}, + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x25000820, 0x25000820}, + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x29000822, 0x29000822}, + {0x0000a534, 0x4202242a, 0x4202242a, 0x2d000824, 0x2d000824}, + {0x0000a538, 0x4702244a, 0x4702244a, 0x30000828, 0x30000828}, + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x3400082a, 0x3400082a}, + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x38000849, 0x38000849}, + {0x0000a544, 0x5302266c, 0x5302266c, 0x3b000a2c, 0x3b000a2c}, + {0x0000a548, 0x5702286c, 0x5702286c, 0x3e000e2b, 0x3e000e2b}, + {0x0000a54c, 0x5c02486b, 0x5c02486b, 0x42000e2d, 0x42000e2d}, + {0x0000a550, 0x61024a6c, 0x61024a6c, 0x4500124a, 0x4500124a}, + {0x0000a554, 0x66026a6c, 0x66026a6c, 0x4900124c, 0x4900124c}, + {0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x4c00126c, 0x4c00126c}, + {0x0000a55c, 0x7002708c, 0x7002708c, 0x4f00128c, 0x4f00128c}, + {0x0000a560, 0x7302b08a, 0x7302b08a, 0x52001290, 0x52001290}, + {0x0000a564, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a568, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a56c, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a570, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a574, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a578, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a57c, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, + {0x0000a584, 0x06800003, 0x06800003, 0x02800001, 0x02800001}, + {0x0000a588, 0x0a800020, 0x0a800020, 0x05800003, 0x05800003}, + {0x0000a58c, 0x10800023, 0x10800023, 0x0a800005, 0x0a800005}, + {0x0000a590, 0x16800220, 0x16800220, 0x0e800201, 0x0e800201}, + {0x0000a594, 0x1c800223, 0x1c800223, 0x11800203, 0x11800203}, + {0x0000a598, 0x21820220, 0x21820220, 0x14800401, 0x14800401}, + {0x0000a59c, 0x27820223, 0x27820223, 0x18800403, 0x18800403}, + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1b800602, 0x1b800602}, + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x1f800802, 0x1f800802}, + {0x0000a5a8, 0x34822225, 0x34822225, 0x21800620, 0x21800620}, + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x25800820, 0x25800820}, + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x29800822, 0x29800822}, + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x2d800824, 0x2d800824}, + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x30800828, 0x30800828}, + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x3480082a, 0x3480082a}, + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x38800849, 0x38800849}, + {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3b800a2c, 0x3b800a2c}, + {0x0000a5c8, 0x5782286c, 0x5782286c, 0x3e800e2b, 0x3e800e2b}, + {0x0000a5cc, 0x5c84286b, 0x5c84286b, 0x42800e2d, 0x42800e2d}, + {0x0000a5d0, 0x61842a6c, 0x61842a6c, 0x4580124a, 0x4580124a}, + {0x0000a5d4, 0x66862a6c, 0x66862a6c, 0x4980124c, 0x4980124c}, + {0x0000a5d8, 0x6b862e6c, 0x6b862e6c, 0x4c80126c, 0x4c80126c}, + {0x0000a5dc, 0x7086308c, 0x7086308c, 0x4f80128c, 0x4f80128c}, + {0x0000a5e0, 0x738a308a, 0x738a308a, 0x52801290, 0x52801290}, + {0x0000a5e4, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5e8, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5ec, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5f0, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5f4, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5f8, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5fc, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a614, 0x01404000, 0x01404000, 0x01404501, 0x01404501}, + {0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501}, + {0x0000a61c, 0x02008802, 0x02008802, 0x01404501, 0x01404501}, + {0x0000a620, 0x0300cc03, 0x0300cc03, 0x03c0cf02, 0x03c0cf02}, + {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03c0cf03, 0x03c0cf03}, + {0x0000a628, 0x0300cc03, 0x0300cc03, 0x04011004, 0x04011004}, + {0x0000a62c, 0x03810c03, 0x03810c03, 0x05419405, 0x05419405}, + {0x0000a630, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000a634, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000a638, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000a63c, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03eaac5a, 0x03eaac5a}, + {0x0000b2e0, 0x0000f800, 0x0000f800, 0x03f330ac, 0x03f330ac}, + {0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03fc3f00, 0x03fc3f00}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ffc000, 0x03ffc000}, + {0x00016044, 0x022492db, 0x022492db, 0x022492db, 0x022492db}, + {0x00016048, 0x24925666, 0x24925666, 0x24925266, 0x24925266}, + {0x00016280, 0x01000015, 0x01000015, 0x01001015, 0x01001015}, + {0x00016288, 0xf0318000, 0xf0318000, 0xf0318000, 0xf0318000}, + {0x00016444, 0x022492db, 0x022492db, 0x022492db, 0x022492db}, + {0x00016448, 0x24925666, 0x24925666, 0x24925266, 0x24925266}, +}; + static const u32 ar9340_1p0_mac_core[][2] = { /* Addr allmodes */ {0x00000008, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h index a3710f3..712f415 100644 --- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h @@ -260,6 +260,79 @@ static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = { {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, }; +static const u32 ar9485Modes_green_ob_db_tx_gain_1_1[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, + {0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000}, + {0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006}, + {0x0000a504, 0x05062002, 0x05062002, 0x03000201, 0x03000201}, + {0x0000a508, 0x0c002e00, 0x0c002e00, 0x06000203, 0x06000203}, + {0x0000a50c, 0x11062202, 0x11062202, 0x0a000401, 0x0a000401}, + {0x0000a510, 0x17022e00, 0x17022e00, 0x0e000403, 0x0e000403}, + {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x12000405, 0x12000405}, + {0x0000a518, 0x25020ec0, 0x25020ec0, 0x15000604, 0x15000604}, + {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x18000605, 0x18000605}, + {0x0000a520, 0x2f001f04, 0x2f001f04, 0x1c000a04, 0x1c000a04}, + {0x0000a524, 0x35001fc4, 0x35001fc4, 0x21000a06, 0x21000a06}, + {0x0000a528, 0x3c022f04, 0x3c022f04, 0x29000a24, 0x29000a24}, + {0x0000a52c, 0x41023e85, 0x41023e85, 0x2f000e21, 0x2f000e21}, + {0x0000a530, 0x48023ec6, 0x48023ec6, 0x31000e20, 0x31000e20}, + {0x0000a534, 0x4d023f01, 0x4d023f01, 0x33000e20, 0x33000e20}, + {0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62}, + {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63}, + {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65}, + {0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66}, + {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645}, + {0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865}, + {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86}, + {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9}, + {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb}, + {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b50c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b510, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b514, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b518, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b51c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b520, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b524, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b528, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b52c, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a}, + {0x0000b530, 0x0000003a, 0x0000003a, 0x0000003a, 0x0000003a}, + {0x0000b534, 0x0000004a, 0x0000004a, 0x0000004a, 0x0000004a}, + {0x0000b538, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b53c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b540, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b544, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b548, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b54c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b550, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b554, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b558, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b55c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b560, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b564, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b568, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b56c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b570, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b574, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b578, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b57c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db}, + {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, +}; + static const u32 ar9485Modes_high_ob_db_tx_gain_1_1[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002}, @@ -450,6 +523,79 @@ static const u32 ar9485Modes_low_ob_db_tx_gain_1_1[][5] = { #define ar9485_modes_lowest_ob_db_tx_gain_1_1 ar9485Modes_low_ob_db_tx_gain_1_1 +static const u32 ar9485Modes_green_spur_ob_db_tx_gain_1_1[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, + {0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000}, + {0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006}, + {0x0000a504, 0x05062002, 0x05062002, 0x03000201, 0x03000201}, + {0x0000a508, 0x0c002e00, 0x0c002e00, 0x07000203, 0x07000203}, + {0x0000a50c, 0x11062202, 0x11062202, 0x0a000401, 0x0a000401}, + {0x0000a510, 0x17022e00, 0x17022e00, 0x0e000403, 0x0e000403}, + {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x12000405, 0x12000405}, + {0x0000a518, 0x25020ec0, 0x25020ec0, 0x14000406, 0x14000406}, + {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1800040a, 0x1800040a}, + {0x0000a520, 0x2f001f04, 0x2f001f04, 0x1c000460, 0x1c000460}, + {0x0000a524, 0x35001fc4, 0x35001fc4, 0x22000463, 0x22000463}, + {0x0000a528, 0x3c022f04, 0x3c022f04, 0x26000465, 0x26000465}, + {0x0000a52c, 0x41023e85, 0x41023e85, 0x2e0006e0, 0x2e0006e0}, + {0x0000a530, 0x48023ec6, 0x48023ec6, 0x310006e0, 0x310006e0}, + {0x0000a534, 0x4d023f01, 0x4d023f01, 0x330006e0, 0x330006e0}, + {0x0000a538, 0x53023f4b, 0x53023f4b, 0x3e0008e3, 0x3e0008e3}, + {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x410008e5, 0x410008e5}, + {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x430008e6, 0x430008e6}, + {0x0000a544, 0x6502feca, 0x6502feca, 0x4a0008ec, 0x4a0008ec}, + {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4e0008f1, 0x4e0008f1}, + {0x0000a54c, 0x7203feca, 0x7203feca, 0x520008f3, 0x520008f3}, + {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x54000eed, 0x54000eed}, + {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x58000ef1, 0x58000ef1}, + {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5c000ef3, 0x5c000ef3}, + {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x60000ef5, 0x60000ef5}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x62000ef6, 0x62000ef6}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b50c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b510, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b514, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b518, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b51c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b520, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b524, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b528, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b52c, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a}, + {0x0000b530, 0x0000003a, 0x0000003a, 0x0000003a, 0x0000003a}, + {0x0000b534, 0x0000004a, 0x0000004a, 0x0000004a, 0x0000004a}, + {0x0000b538, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b53c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b540, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b544, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b548, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b54c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b550, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b554, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b558, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b55c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b560, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b564, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b568, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b56c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b570, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b574, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b578, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b57c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db}, + {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, +}; + static const u32 ar9485_1_1[][2] = { /* Addr allmodes */ {0x0000a580, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h index 6e1915a..28fd992 100644 --- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h @@ -685,6 +685,82 @@ static const u32 ar9580_1p0_mixed_ob_db_tx_gain_table[][5] = { #define ar9580_1p0_high_ob_db_tx_gain_table ar9300Modes_high_ob_db_tx_gain_table_2p2 +#define ar9580_1p0_type5_tx_gain_table ar9300Modes_type5_tx_gain_table_2p2 + +static const u32 ar9580_1p0_type6_tx_gain_table[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, + {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, + {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, + {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, + {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, + {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, + {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, + {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, + {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, + {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, + {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, + {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, + {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, + {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, + {0x0000a54c, 0x5e08442e, 0x5e08442e, 0x47001a83, 0x47001a83}, + {0x0000a550, 0x620a4431, 0x620a4431, 0x4a001c84, 0x4a001c84}, + {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, + {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, + {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, + {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, + {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, + {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, + {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, + {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, +}; + static const u32 ar9580_1p0_soc_preamble[][2] = { /* Addr allmodes */ {0x000040a4, 0x00a0c1c9}, diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 0ac205e..5929850 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -789,6 +789,7 @@ #define AR_SREV_REVISION_9271_11 1 #define AR_SREV_VERSION_9300 0x1c0 #define AR_SREV_REVISION_9300_20 2 /* 2.0 and 2.1 */ +#define AR_SREV_REVISION_9300_22 3 #define AR_SREV_VERSION_9330 0x200 #define AR_SREV_REVISION_9330_10 0 #define AR_SREV_REVISION_9330_11 1 @@ -869,6 +870,9 @@ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9300)) #define AR_SREV_9300_20_OR_LATER(_ah) \ ((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9300) +#define AR_SREV_9300_22(_ah) \ + (AR_SREV_9300(ah) && \ + ((_ah)->hw_version.macRev == AR_SREV_REVISION_9300_22)) #define AR_SREV_9330(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9330)) -- cgit v0.10.2 From 990debe2ca8379863709721926550a55f47f3880 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Thu, 10 Jan 2013 22:24:03 -0800 Subject: bcma: update pci configuration for bcm4706/bcm4716 Update the PCI configuration for BCM4706 and BCM4716 per the 2011 Broadcom SDK. Signed-off-by: Nathan Hintz Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index ef9f093..37d1777d 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -427,7 +427,7 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) /* Reset RC */ usleep_range(3000, 5000); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); - usleep_range(1000, 2000); + msleep(50); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | BCMA_CORE_PCI_CTL_RST_OE); @@ -489,6 +489,17 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) bcma_core_pci_enable_crs(pc); + if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || + bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { + u16 val16; + bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, + &val16, sizeof(val16)); + val16 |= (2 << 5); /* Max payload size of 512 */ + val16 |= (2 << 12); /* MRRS 512 */ + bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, + &val16, sizeof(val16)); + } + /* Enable PCI bridge BAR0 memory & master access */ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 41da581..3123224 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -179,6 +179,8 @@ struct pci_dev; #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ +#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + /* PCIE Root Capability Register bits (Host mode only) */ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 -- cgit v0.10.2 From 87696f9234cb681ded2697b0f0fd01bb15a2aff2 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 11 Jan 2013 10:38:42 -0800 Subject: net: Export __netdev_pick_tx so that it can be used in modules When testing with FCoE enabled we discovered that I had not exported __netdev_pick_tx. As a result ixgbe doesn't build with the RFC patches applied because ixgbe_select_queue was calling the function. This change corrects that build issue by correctly exporting __netdev_pick_tx so it can be used by modules. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 95de4c0..d1e8116 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2746,6 +2746,7 @@ u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb) return queue_index; } +EXPORT_SYMBOL(__netdev_pick_tx); struct netdev_queue *netdev_pick_tx(struct net_device *dev, struct sk_buff *skb) -- cgit v0.10.2 From 28a28283f8220e0b397a18f624fbcbbe046b063c Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Fri, 11 Jan 2013 09:59:20 +0000 Subject: ipv4: fib: fix a comment. In fib_frontend.c, there is a confusing comment; NETLINK_CB(skb).portid does not refer to a pid of sending process, but rather to a netlink portid. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 5cd75e2..99f00d3 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -974,7 +974,7 @@ static void nl_fib_input(struct sk_buff *skb) nl_fib_lookup(frn, tb); - portid = NETLINK_CB(skb).portid; /* pid of sending process */ + portid = NETLINK_CB(skb).portid; /* netlink portid */ NETLINK_CB(skb).portid = 0; /* from kernel */ NETLINK_CB(skb).dst_group = 0; /* unicast */ netlink_unicast(net->ipv4.fibnl, skb, portid, MSG_DONTWAIT); -- cgit v0.10.2 From fb0174723e578f9023f1237143fb81e75f470f60 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 11 Jan 2013 12:18:21 +0000 Subject: gianfar: use more portable i/o accessors in/out_be32 accessors are Power arch centric whereas ioread/writebe32 are available in other arches. Also, unlike in/out_be32, ioread/writebe32 expect non-volatile address arguments. Signed-off-by: Kim Phillips Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 1b6a67c..91bb2de 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -1136,16 +1136,16 @@ static inline int gfar_has_errata(struct gfar_private *priv, return priv->errata & err; } -static inline u32 gfar_read(volatile unsigned __iomem *addr) +static inline u32 gfar_read(unsigned __iomem *addr) { u32 val; - val = in_be32(addr); + val = ioread32be(addr); return val; } -static inline void gfar_write(volatile unsigned __iomem *addr, u32 val) +static inline void gfar_write(unsigned __iomem *addr, u32 val) { - out_be32(addr, val); + iowrite32be(val, addr); } static inline void gfar_write_filer(struct gfar_private *priv, -- cgit v0.10.2 From 18aafc622abf492809723d9c5a3c5dcea287169e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 11 Jan 2013 14:46:37 +0000 Subject: net: splice: fix __splice_segment() commit 9ca1b22d6d2 (net: splice: avoid high order page splitting) forgot that skb->head could need a copy into several page frags. This could be the case for loopback traffic mostly. Also remove now useless skb argument from linear_to_page() and __splice_segment() prototypes. Signed-off-by: Eric Dumazet Cc: Willy Tarreau Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 1e1b9ea..2568c44 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1652,7 +1652,7 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) static struct page *linear_to_page(struct page *page, unsigned int *len, unsigned int *offset, - struct sk_buff *skb, struct sock *sk) + struct sock *sk) { struct page_frag *pfrag = sk_page_frag(sk); @@ -1685,14 +1685,14 @@ static bool spd_can_coalesce(const struct splice_pipe_desc *spd, static bool spd_fill_page(struct splice_pipe_desc *spd, struct pipe_inode_info *pipe, struct page *page, unsigned int *len, unsigned int offset, - struct sk_buff *skb, bool linear, + bool linear, struct sock *sk) { if (unlikely(spd->nr_pages == MAX_SKB_FRAGS)) return true; if (linear) { - page = linear_to_page(page, len, &offset, skb, sk); + page = linear_to_page(page, len, &offset, sk); if (!page) return true; } @@ -1711,13 +1711,11 @@ static bool spd_fill_page(struct splice_pipe_desc *spd, static bool __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, - unsigned int *len, struct sk_buff *skb, + unsigned int *len, struct splice_pipe_desc *spd, bool linear, struct sock *sk, struct pipe_inode_info *pipe) { - unsigned int flen; - if (!*len) return true; @@ -1732,12 +1730,16 @@ static bool __splice_segment(struct page *page, unsigned int poff, plen -= *off; *off = 0; - flen = min(*len, plen); - - if (spd_fill_page(spd, pipe, page, &flen, poff, skb, linear, sk)) - return true; + do { + unsigned int flen = min(*len, plen); - *len -= flen; + if (spd_fill_page(spd, pipe, page, &flen, poff, + linear, sk)) + return true; + poff += flen; + plen -= flen; + *len -= flen; + } while (*len && plen); return false; } @@ -1760,7 +1762,7 @@ static bool __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd, + offset, len, spd, skb_head_is_locked(skb), sk, pipe)) return true; @@ -1773,7 +1775,7 @@ static bool __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe, if (__splice_segment(skb_frag_page(f), f->page_offset, skb_frag_size(f), - offset, len, skb, spd, false, sk, pipe)) + offset, len, spd, false, sk, pipe)) return true; } -- cgit v0.10.2 From 00494be4546432a11d62ebfeca363256ff9822b5 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 11 Jan 2013 14:45:58 +0000 Subject: networking/cs89x0.txt: delete stale information about hand patching Output of a git grep happened to make me look into this file, and I found instructions about how to hand patch (without using patch) the driver into the kernel tree. Since the driver has been a part of the mainline kernel for years, we can dump this whole section. Fortunately it doesn't even cause a renumbering of the sections to do so. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt index c725d33..0e19018 100644 --- a/Documentation/networking/cs89x0.txt +++ b/Documentation/networking/cs89x0.txt @@ -36,7 +36,6 @@ TABLE OF CONTENTS 4.1 Compiling the Driver as a Loadable Module 4.2 Compiling the driver to support memory mode 4.3 Compiling the driver to support Rx DMA - 4.4 Compiling the Driver into the Kernel 5.0 TESTING AND TROUBLESHOOTING 5.1 Known Defects and Limitations @@ -364,84 +363,6 @@ The compile-time optionality for DMA was removed in the 2.3 kernel series. DMA support is now unconditionally part of the driver. It is enabled by the 'use_dma=1' module option. -4.4 COMPILING THE DRIVER INTO THE KERNEL - -If your Linux distribution already has support for the cs89x0 driver -then simply copy the source file to the /usr/src/linux/drivers/net -directory to replace the original ones and run the make utility to -rebuild the kernel. See Step 3 for rebuilding the kernel. - -If your Linux does not include the cs89x0 driver, you need to edit three -configuration files, copy the source file to the /usr/src/linux/drivers/net -directory, and then run the make utility to rebuild the kernel. - -1. Edit the following configuration files by adding the statements as -indicated. (When possible, try to locate the added text to the section of the -file containing similar statements). - - -a.) In /usr/src/linux/drivers/net/Config.in, add: - -tristate 'CS89x0 support' CONFIG_CS89x0 - -Example: - - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I - fi - - tristate 'CS89x0 support' CONFIG_CS89x0 - - tristate 'NE2000/NE1000 support' CONFIG_NE2000 - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'NI5210 support' CONFIG_NI52 - - -b.) In /usr/src/linux/drivers/net/Makefile, add the following lines: - -ifeq ($(CONFIG_CS89x0),y) -L_OBJS += cs89x0.o -else - ifeq ($(CONFIG_CS89x0),m) - M_OBJS += cs89x0.o - endif -endif - - -c.) In /linux/drivers/net/Space.c file, add the line: - -extern int cs89x0_probe(struct device *dev); - - -Example: - - extern int ultra_probe(struct device *dev); - extern int wd_probe(struct device *dev); - extern int el2_probe(struct device *dev); - - extern int cs89x0_probe(struct device *dev); - - extern int ne_probe(struct device *dev); - extern int hp_probe(struct device *dev); - extern int hp_plus_probe(struct device *dev); - - -Also add: - - #ifdef CONFIG_CS89x0 - { cs89x0_probe,0 }, - #endif - - -2.) Copy the driver source files (cs89x0.c and cs89x0.h) -into the /usr/src/linux/drivers/net directory. - - -3.) Go to /usr/src/linux directory and run 'make config' followed by 'make' -(or make bzImage) to rebuild the kernel. - -4.) Use the DOS 'setup' utility to disable plug and play on the NIC. - 5.0 TESTING AND TROUBLESHOOTING =============================================================================== -- cgit v0.10.2 From 569174433d3bd96e206a4b5969a4498371c70d16 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 13 Nov 2012 09:53:26 +0800 Subject: batman-adv: use per_cpu_add helper this_cpu_add is an atomic operation. and be more faster than per_cpu_ptr operation. Signed-off-by: Shan Wei Reviewed-by: Christoph Lameter Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index 2f85577..c4fe41f 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -276,9 +276,7 @@ static inline bool batadv_has_timed_out(unsigned long timestamp, static inline void batadv_add_counter(struct batadv_priv *bat_priv, size_t idx, size_t count) { - int cpu = get_cpu(); - per_cpu_ptr(bat_priv->bat_counters, cpu)[idx] += count; - put_cpu(); + this_cpu_add(bat_priv->bat_counters[idx], count); } #define batadv_inc_counter(b, i) batadv_add_counter(b, i, 1) -- cgit v0.10.2 From 02233e0c75fc512ca60e7e82943f0a4395a85411 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Wed, 17 Oct 2012 15:07:35 +0200 Subject: batman-adv: Do not add multicast MAC addresses to translation table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current translation table mechanism is not suitable for multicast addresses and we are currently flooding such frames anyway. Therefore this patch prevents multicast MAC addresses being added to the translation table. Signed-off-by: Linus Lüssing Acked-by: Antonio Quartulli Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 90f4049..f8cc142 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -180,7 +180,8 @@ static int batadv_interface_tx(struct sk_buff *skb, goto dropped; /* Register the client MAC in the transtable */ - batadv_tt_local_add(soft_iface, ethhdr->h_source, skb->skb_iif); + if (!is_multicast_ether_addr(ethhdr->h_source)) + batadv_tt_local_add(soft_iface, ethhdr->h_source, skb->skb_iif); /* don't accept stp packets. STP does not help in meshes. * better use the bridge loop avoidance ... -- cgit v0.10.2 From 7cf4d520fdb72250b769920274279249629881ce Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 8 Nov 2012 22:16:15 +0100 Subject: batman-adv: reduce local TT entry timeout to 10 minutes The current timeout is set to one hour. However a client connected to the mesh network will always generate traffic. In the worst case it will send ARP requests every 4 or 5 minutes. On the other hand having a long timeout means storing dead entries for one hour and it leads to very big trans-tables containing useless clients. This patch reduces the timeout to 10 minutes Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index c4fe41f..d04b209 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -41,7 +41,7 @@ * -> TODO: check influence on BATADV_TQ_LOCAL_WINDOW_SIZE */ #define BATADV_PURGE_TIMEOUT 200000 /* 200 seconds */ -#define BATADV_TT_LOCAL_TIMEOUT 3600000 /* in milliseconds */ +#define BATADV_TT_LOCAL_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_CLIENT_ROAM_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_CLIENT_TEMP_TIMEOUT 600000 /* in milliseconds */ #define BATADV_DAT_ENTRY_TIMEOUT (5*60000) /* 5 mins in milliseconds */ -- cgit v0.10.2 From 85766a82003ec5ecc35403e855c47ce69c4658fc Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 8 Nov 2012 22:16:16 +0100 Subject: batman-adv: improve local translation table output This patch adds a nice header to the local translation table and the last_seen time for each local entry Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 22457a7..426a3ae 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -472,10 +472,16 @@ int batadv_tt_local_seq_print_text(struct seq_file *seq, void *offset) struct batadv_priv *bat_priv = netdev_priv(net_dev); struct batadv_hashtable *hash = bat_priv->tt.local_hash; struct batadv_tt_common_entry *tt_common_entry; + struct batadv_tt_local_entry *tt_local; struct batadv_hard_iface *primary_if; struct hlist_node *node; struct hlist_head *head; uint32_t i; + int last_seen_secs; + int last_seen_msecs; + unsigned long last_seen_jiffies; + bool no_purge; + uint16_t np_flag = BATADV_TT_CLIENT_NOPURGE; primary_if = batadv_seq_print_text_primary_if_get(seq); if (!primary_if) @@ -484,6 +490,8 @@ int batadv_tt_local_seq_print_text(struct seq_file *seq, void *offset) seq_printf(seq, "Locally retrieved addresses (from %s) announced via TT (TTVN: %u):\n", net_dev->name, (uint8_t)atomic_read(&bat_priv->tt.vn)); + seq_printf(seq, " %-13s %-7s %-10s\n", "Client", "Flags", + "Last seen"); for (i = 0; i < hash->size; i++) { head = &hash->table[i]; @@ -491,18 +499,29 @@ int batadv_tt_local_seq_print_text(struct seq_file *seq, void *offset) rcu_read_lock(); hlist_for_each_entry_rcu(tt_common_entry, node, head, hash_entry) { - seq_printf(seq, " * %pM [%c%c%c%c%c]\n", + tt_local = container_of(tt_common_entry, + struct batadv_tt_local_entry, + common); + last_seen_jiffies = jiffies - tt_local->last_seen; + last_seen_msecs = jiffies_to_msecs(last_seen_jiffies); + last_seen_secs = last_seen_msecs / 1000; + last_seen_msecs = last_seen_msecs % 1000; + + no_purge = tt_common_entry->flags & np_flag; + + seq_printf(seq, " * %pM [%c%c%c%c%c] %3u.%03u\n", tt_common_entry->addr, (tt_common_entry->flags & BATADV_TT_CLIENT_ROAM ? 'R' : '.'), - (tt_common_entry->flags & - BATADV_TT_CLIENT_NOPURGE ? 'P' : '.'), + no_purge ? 'P' : '.', (tt_common_entry->flags & BATADV_TT_CLIENT_NEW ? 'N' : '.'), (tt_common_entry->flags & BATADV_TT_CLIENT_PENDING ? 'X' : '.'), (tt_common_entry->flags & - BATADV_TT_CLIENT_WIFI ? 'W' : '.')); + BATADV_TT_CLIENT_WIFI ? 'W' : '.'), + no_purge ? last_seen_secs : 0, + no_purge ? last_seen_msecs : 0); } rcu_read_unlock(); } -- cgit v0.10.2 From f9d8a53784a53a528e2c180291874500e87d9c91 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 19 Nov 2012 09:01:42 +0100 Subject: batman-adv: print the CRC together with the translation tables To simplify debugging operations, it is better to print the related CRC together with the translation table (local CRC for the local table and global CRC for each entry in the global table) Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 426a3ae..408807e 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -488,8 +488,9 @@ int batadv_tt_local_seq_print_text(struct seq_file *seq, void *offset) goto out; seq_printf(seq, - "Locally retrieved addresses (from %s) announced via TT (TTVN: %u):\n", - net_dev->name, (uint8_t)atomic_read(&bat_priv->tt.vn)); + "Locally retrieved addresses (from %s) announced via TT (TTVN: %u CRC: %#.4x):\n", + net_dev->name, (uint8_t)atomic_read(&bat_priv->tt.vn), + bat_priv->tt.local_crc); seq_printf(seq, " %-13s %-7s %-10s\n", "Client", "Flags", "Last seen"); @@ -986,10 +987,11 @@ batadv_tt_global_print_entry(struct batadv_tt_global_entry *tt_global_entry, best_entry = batadv_transtable_best_orig(tt_global_entry); if (best_entry) { last_ttvn = atomic_read(&best_entry->orig_node->last_ttvn); - seq_printf(seq, " %c %pM (%3u) via %pM (%3u) [%c%c%c]\n", + seq_printf(seq, + " %c %pM (%3u) via %pM (%3u) (%#.4x) [%c%c%c]\n", '*', tt_global_entry->common.addr, best_entry->ttvn, best_entry->orig_node->orig, - last_ttvn, + last_ttvn, best_entry->orig_node->tt_crc, (flags & BATADV_TT_CLIENT_ROAM ? 'R' : '.'), (flags & BATADV_TT_CLIENT_WIFI ? 'W' : '.'), (flags & BATADV_TT_CLIENT_TEMP ? 'T' : '.')); @@ -1031,8 +1033,9 @@ int batadv_tt_global_seq_print_text(struct seq_file *seq, void *offset) seq_printf(seq, "Globally announced TT entries received via the mesh %s\n", net_dev->name); - seq_printf(seq, " %-13s %s %-15s %s %s\n", - "Client", "(TTVN)", "Originator", "(Curr TTVN)", "Flags"); + seq_printf(seq, " %-13s %s %-15s %s (%-6s) %s\n", + "Client", "(TTVN)", "Originator", "(Curr TTVN)", "CRC", + "Flags"); for (i = 0; i < hash->size; i++) { head = &hash->table[i]; -- cgit v0.10.2 From 39a329915889a220b5f2c3f2eb3d7fd892567715 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 19 Nov 2012 09:01:43 +0100 Subject: batman-adv: unify and properly print hex values Values are printed in hexadecimal format in several points in the code, but they are not printed using the same format string. This patches unifies the format used for such numbers so that they look the same everywhere. Given the fact that all the variables printed as hexadecimal are 16 bit long, this is the chosen printing format: %#.4x Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 7d02ebd..f2a3649 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -1033,7 +1033,7 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, is_single_hop_neigh = true; batadv_dbg(BATADV_DBG_BATMAN, bat_priv, - "Received BATMAN packet via NB: %pM, IF: %s [%pM] (from OG: %pM, via prev OG: %pM, seqno %u, ttvn %u, crc %u, changes %u, td %d, TTL %d, V %d, IDF %d)\n", + "Received BATMAN packet via NB: %pM, IF: %s [%pM] (from OG: %pM, via prev OG: %pM, seqno %u, ttvn %u, crc %#.4x, changes %u, td %d, TTL %d, V %d, IDF %d)\n", ethhdr->h_source, if_incoming->net_dev->name, if_incoming->net_dev->dev_addr, batadv_ogm_packet->orig, batadv_ogm_packet->prev_sender, diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 5aebe93..ec12c79 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -661,12 +661,12 @@ static int batadv_handle_announce(struct batadv_priv *bat_priv, crc = ntohs(*((__be16 *)(&an_addr[4]))); batadv_dbg(BATADV_DBG_BLA, bat_priv, - "handle_announce(): ANNOUNCE vid %d (sent by %pM)... CRC = %04x\n", + "handle_announce(): ANNOUNCE vid %d (sent by %pM)... CRC = %#.4x\n", vid, backbone_gw->orig, crc); if (backbone_gw->crc != crc) { batadv_dbg(BATADV_DBG_BLA, backbone_gw->bat_priv, - "handle_announce(): CRC FAILED for %pM/%d (my = %04x, sent = %04x)\n", + "handle_announce(): CRC FAILED for %pM/%d (my = %#.4x, sent = %#.4x)\n", backbone_gw->orig, backbone_gw->vid, backbone_gw->crc, crc); @@ -835,7 +835,7 @@ static int batadv_check_claim_group(struct batadv_priv *bat_priv, /* if our mesh friends mac is bigger, use it for ourselves. */ if (ntohs(bla_dst->group) > ntohs(bla_dst_own->group)) { batadv_dbg(BATADV_DBG_BLA, bat_priv, - "taking other backbones claim group: %04x\n", + "taking other backbones claim group: %#.4x\n", ntohs(bla_dst->group)); bla_dst_own->group = bla_dst->group; } @@ -1626,10 +1626,10 @@ int batadv_bla_claim_table_seq_print_text(struct seq_file *seq, void *offset) primary_addr = primary_if->net_dev->dev_addr; seq_printf(seq, - "Claims announced for the mesh %s (orig %pM, group id %04x)\n", + "Claims announced for the mesh %s (orig %pM, group id %#.4x)\n", net_dev->name, primary_addr, ntohs(bat_priv->bla.claim_dest.group)); - seq_printf(seq, " %-17s %-5s %-17s [o] (%-4s)\n", + seq_printf(seq, " %-17s %-5s %-17s [o] (%-6s)\n", "Client", "VID", "Originator", "CRC"); for (i = 0; i < hash->size; i++) { head = &hash->table[i]; @@ -1638,7 +1638,7 @@ int batadv_bla_claim_table_seq_print_text(struct seq_file *seq, void *offset) hlist_for_each_entry_rcu(claim, node, head, hash_entry) { is_own = batadv_compare_eth(claim->backbone_gw->orig, primary_addr); - seq_printf(seq, " * %pM on % 5d by %pM [%c] (%04x)\n", + seq_printf(seq, " * %pM on % 5d by %pM [%c] (%#.4x)\n", claim->addr, claim->vid, claim->backbone_gw->orig, (is_own ? 'x' : ' '), @@ -1672,10 +1672,10 @@ int batadv_bla_backbone_table_seq_print_text(struct seq_file *seq, void *offset) primary_addr = primary_if->net_dev->dev_addr; seq_printf(seq, - "Backbones announced for the mesh %s (orig %pM, group id %04x)\n", + "Backbones announced for the mesh %s (orig %pM, group id %#.4x)\n", net_dev->name, primary_addr, ntohs(bat_priv->bla.claim_dest.group)); - seq_printf(seq, " %-17s %-5s %-9s (%-4s)\n", + seq_printf(seq, " %-17s %-5s %-9s (%-6s)\n", "Originator", "VID", "last seen", "CRC"); for (i = 0; i < hash->size; i++) { head = &hash->table[i]; @@ -1693,7 +1693,7 @@ int batadv_bla_backbone_table_seq_print_text(struct seq_file *seq, void *offset) continue; seq_printf(seq, - " * %pM on % 5d % 4i.%03is (%04x)\n", + " * %pM on % 5d % 4i.%03is (%#.4x)\n", backbone_gw->orig, backbone_gw->vid, secs, msecs, backbone_gw->crc); } diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 408807e..40ef955 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -2518,7 +2518,7 @@ void batadv_tt_update_orig(struct batadv_priv *bat_priv, orig_node->tt_crc != tt_crc) { request_table: batadv_dbg(BATADV_DBG_TT, bat_priv, - "TT inconsistency for %pM. Need to retrieve the correct information (ttvn: %u last_ttvn: %u crc: %u last_crc: %u num_changes: %u)\n", + "TT inconsistency for %pM. Need to retrieve the correct information (ttvn: %u last_ttvn: %u crc: %#.4x last_crc: %#.4x num_changes: %u)\n", orig_node->orig, ttvn, orig_ttvn, tt_crc, orig_node->tt_crc, tt_num_changes); batadv_send_tt_request(bat_priv, orig_node, ttvn, -- cgit v0.10.2 From 8425ec6aea20f8c8e1783d7390f5ea6ca01c58e1 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 19 Nov 2012 09:01:44 +0100 Subject: batman-adv: remove useless assignment in tt_local_add() The flag field of the tt_local_entry->common structure in tt_local_add() is first assigned NO_FLAGS and then TT_CLIENT_NEW so nullifying the first operation. For this reason it is safe to remove the first assignment. This was introuduced by ("batman-adv: keep local table consistency for further TT_RESPONSE") Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 40ef955..5f44232 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -305,7 +305,11 @@ void batadv_tt_local_add(struct net_device *soft_iface, const uint8_t *addr, (uint8_t)atomic_read(&bat_priv->tt.vn)); memcpy(tt_local->common.addr, addr, ETH_ALEN); - tt_local->common.flags = BATADV_NO_FLAGS; + /* The local entry has to be marked as NEW to avoid to send it in + * a full table response going out before the next ttvn increment + * (consistency check) + */ + tt_local->common.flags = BATADV_TT_CLIENT_NEW; if (batadv_is_wifi_iface(ifindex)) tt_local->common.flags |= BATADV_TT_CLIENT_WIFI; atomic_set(&tt_local->common.refcount, 2); @@ -316,12 +320,6 @@ void batadv_tt_local_add(struct net_device *soft_iface, const uint8_t *addr, if (batadv_compare_eth(addr, soft_iface->dev_addr)) tt_local->common.flags |= BATADV_TT_CLIENT_NOPURGE; - /* The local entry has to be marked as NEW to avoid to send it in - * a full table response going out before the next ttvn increment - * (consistency check) - */ - tt_local->common.flags |= BATADV_TT_CLIENT_NEW; - hash_added = batadv_hash_add(bat_priv->tt.local_hash, batadv_compare_tt, batadv_choose_orig, &tt_local->common, &tt_local->common.hash_entry); -- cgit v0.10.2 From dec05074b1a322f5fbbe3f81bc438a75bfec3c34 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sat, 10 Nov 2012 11:00:32 +0100 Subject: batman-adv: Initialize lockdep class keys for hashes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Different hashes have the same class key because they get initialised with the same one. For this reason lockdep can create false warning when they are used recursively. Re-initialise the key for each hash after the invocation to hash_new() to avoid this problem. Signed-off-by: Antonio Quartulli Tested-by: Linus Lüssing Signed-off-by: Marek Lindner diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 8c32cf1..109081c4 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -29,6 +29,9 @@ #include "soft-interface.h" #include "bridge_loop_avoidance.h" +/* hash class keys */ +static struct lock_class_key batadv_orig_hash_lock_class_key; + static void batadv_purge_orig(struct work_struct *work); static void batadv_start_purge_timer(struct batadv_priv *bat_priv) @@ -57,6 +60,9 @@ int batadv_originator_init(struct batadv_priv *bat_priv) if (!bat_priv->orig_hash) goto err; + batadv_hash_set_lock_class(bat_priv->orig_hash, + &batadv_orig_hash_lock_class_key); + batadv_start_purge_timer(bat_priv); return 0; diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 5f44232..c6fd0b7 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -29,6 +29,10 @@ #include +/* hash class keys */ +static struct lock_class_key batadv_tt_local_hash_lock_class_key; +static struct lock_class_key batadv_tt_global_hash_lock_class_key; + static void batadv_send_roam_adv(struct batadv_priv *bat_priv, uint8_t *client, struct batadv_orig_node *orig_node); static void batadv_tt_purge(struct work_struct *work); @@ -235,6 +239,9 @@ static int batadv_tt_local_init(struct batadv_priv *bat_priv) if (!bat_priv->tt.local_hash) return -ENOMEM; + batadv_hash_set_lock_class(bat_priv->tt.local_hash, + &batadv_tt_local_hash_lock_class_key); + return 0; } @@ -694,6 +701,9 @@ static int batadv_tt_global_init(struct batadv_priv *bat_priv) if (!bat_priv->tt.global_hash) return -ENOMEM; + batadv_hash_set_lock_class(bat_priv->tt.global_hash, + &batadv_tt_global_hash_lock_class_key); + return 0; } diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 0f65a9d..60eb9b7 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -28,6 +28,9 @@ #define BATADV_MAX_VIS_PACKET_SIZE 1000 +/* hash class keys */ +static struct lock_class_key batadv_vis_hash_lock_class_key; + static void batadv_start_vis_timer(struct batadv_priv *bat_priv); /* free the info */ @@ -852,6 +855,9 @@ int batadv_vis_init(struct batadv_priv *bat_priv) goto err; } + batadv_hash_set_lock_class(bat_priv->vis.hash, + &batadv_vis_hash_lock_class_key); + bat_priv->vis.my_info = kmalloc(BATADV_MAX_VIS_PACKET_SIZE, GFP_ATOMIC); if (!bat_priv->vis.my_info) goto err; -- cgit v0.10.2 From 46d160ef887963f26fee2df3d3b99eab54637014 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sat, 1 Dec 2012 02:32:01 +0100 Subject: batman-adv: remove useless blank lines before and after brackets Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index f2a3649..d90e925 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -183,7 +183,6 @@ static void batadv_iv_ogm_send_to_if(struct batadv_forw_packet *forw_packet, /* adjust all flags and log packets */ while (batadv_iv_ogm_aggr_packet(buff_pos, forw_packet->packet_len, batadv_ogm_packet->tt_num_changes)) { - /* we might have aggregated direct link packets with an * ordinary base packet */ @@ -261,7 +260,6 @@ static void batadv_iv_ogm_emit(struct batadv_forw_packet *forw_packet) */ if ((directlink && (batadv_ogm_packet->header.ttl == 1)) || (forw_packet->own && (forw_packet->if_incoming != primary_if))) { - /* FIXME: what about aggregated packets ? */ batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "%s packet (originator %pM, seqno %u, TTL %d) on interface %s [%pM]\n", @@ -325,7 +323,6 @@ batadv_iv_ogm_can_aggregate(const struct batadv_ogm_packet *new_bat_ogm_packet, if (time_before(send_time, forw_packet->send_time) && time_after_eq(aggregation_end_time, forw_packet->send_time) && (aggregated_bytes <= BATADV_MAX_AGGREGATION_BYTES)) { - /* check aggregation compatibility * -> direct link packets are broadcasted on * their interface only @@ -815,7 +812,6 @@ static int batadv_iv_ogm_calc_tq(struct batadv_orig_node *orig_node, rcu_read_lock(); hlist_for_each_entry_rcu(tmp_neigh_node, node, &orig_neigh_node->neigh_list, list) { - if (!batadv_compare_eth(tmp_neigh_node->addr, orig_neigh_node->orig)) continue; @@ -949,7 +945,6 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, rcu_read_lock(); hlist_for_each_entry_rcu(tmp_neigh_node, node, &orig_node->neigh_list, list) { - is_duplicate |= batadv_test_bit(tmp_neigh_node->real_bits, orig_node->last_real_seqno, seqno); @@ -1223,7 +1218,6 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, /* is single hop (direct) neighbor */ if (is_single_hop_neigh) { - /* mark direct link on incoming interface */ batadv_iv_ogm_forward(orig_node, ethhdr, batadv_ogm_packet, is_single_hop_neigh, diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index ec12c79..724adf0 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -235,7 +235,6 @@ batadv_bla_del_backbone_claims(struct batadv_backbone_gw *backbone_gw) spin_lock_bh(list_lock); hlist_for_each_entry_safe(claim, node, node_tmp, head, hash_entry) { - if (claim->backbone_gw != backbone_gw) continue; @@ -338,7 +337,6 @@ static void batadv_bla_send_claim(struct batadv_priv *bat_priv, uint8_t *mac, "bla_send_claim(): REQUEST of %pM to %pMon vid %d\n", ethhdr->h_source, ethhdr->h_dest, vid); break; - } if (vid != -1) @@ -539,7 +537,6 @@ static void batadv_bla_send_announce(struct batadv_priv *bat_priv, batadv_bla_send_claim(bat_priv, mac, backbone_gw->vid, BATADV_CLAIM_TYPE_ANNOUNCE); - } /** @@ -598,7 +595,6 @@ static void batadv_bla_add_claim(struct batadv_priv *bat_priv, claim->backbone_gw->crc ^= crc16(0, claim->addr, ETH_ALEN); batadv_backbone_gw_free_ref(claim->backbone_gw); - } /* set (new) backbone gw */ atomic_inc(&backbone_gw->refcount); diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 6f58ddd..0049837 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -164,7 +164,6 @@ static ssize_t batadv_log_read(struct file *file, char __user *buf, buf++; i++; - } spin_unlock_bh(&debug_log->lock); diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 109081c4..fa88b2b 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -184,7 +184,6 @@ void batadv_originator_free(struct batadv_priv *bat_priv) spin_lock_bh(list_lock); hlist_for_each_entry_safe(orig_node, node, node_tmp, head, hash_entry) { - hlist_del_rcu(node); batadv_orig_node_free_ref(orig_node); } @@ -291,7 +290,6 @@ batadv_purge_orig_neighbors(struct batadv_priv *bat_priv, /* for all neighbors towards this originator ... */ hlist_for_each_entry_safe(neigh_node, node, node_tmp, &orig_node->neigh_list, list) { - last_seen = neigh_node->last_seen; if_incoming = neigh_node->if_incoming; @@ -299,7 +297,6 @@ batadv_purge_orig_neighbors(struct batadv_priv *bat_priv, (if_incoming->if_status == BATADV_IF_INACTIVE) || (if_incoming->if_status == BATADV_IF_NOT_IN_USE) || (if_incoming->if_status == BATADV_IF_TO_BE_REMOVED)) { - if ((if_incoming->if_status == BATADV_IF_INACTIVE) || (if_incoming->if_status == BATADV_IF_NOT_IN_USE) || (if_incoming->if_status == BATADV_IF_TO_BE_REMOVED)) diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index 1aa1722..db89238 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -80,7 +80,6 @@ static void _batadv_update_route(struct batadv_priv *bat_priv, /* route added */ } else if ((!curr_router) && (neigh_node)) { - batadv_dbg(BATADV_DBG_ROUTES, bat_priv, "Adding route towards: %pM (via %pM)\n", orig_node->orig, neigh_node->addr); @@ -172,7 +171,6 @@ void batadv_bonding_candidate_add(struct batadv_orig_node *orig_node, */ hlist_for_each_entry_rcu(tmp_neigh_node, node, &orig_node->neigh_list, list) { - if (tmp_neigh_node == neigh_node) continue; @@ -836,7 +834,6 @@ static int batadv_route_unicast_packet(struct sk_buff *skb, if (unicast_packet->header.packet_type == BATADV_UNICAST_FRAG && batadv_frag_can_reassemble(skb, neigh_node->if_incoming->net_dev->mtu)) { - ret = batadv_frag_reassemble_skb(skb, bat_priv, &new_skb); if (ret == NET_RX_DROP) @@ -1103,7 +1100,6 @@ int batadv_recv_ucast_frag_packet(struct sk_buff *skb, /* packet for me */ if (batadv_is_my_mac(unicast_packet->dest)) { - ret = batadv_frag_reassemble_skb(skb, bat_priv, &new_skb); if (ret == NET_RX_DROP) diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c index 4425af9..89810ce 100644 --- a/net/batman-adv/send.c +++ b/net/batman-adv/send.c @@ -330,7 +330,6 @@ batadv_purge_outstanding_packets(struct batadv_priv *bat_priv, spin_lock_bh(&bat_priv->forw_bcast_list_lock); hlist_for_each_entry_safe(forw_packet, tmp_node, safe_tmp_node, &bat_priv->forw_bcast_list, list) { - /* if purge_outstanding_packets() was called with an argument * we delete only packets belonging to the given interface */ @@ -357,7 +356,6 @@ batadv_purge_outstanding_packets(struct batadv_priv *bat_priv, spin_lock_bh(&bat_priv->forw_bat_list_lock); hlist_for_each_entry_safe(forw_packet, tmp_node, safe_tmp_node, &bat_priv->forw_bat_list, list) { - /* if purge_outstanding_packets() was called with an argument * we delete only packets belonging to the given interface */ diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c6fd0b7..d4b27b6 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -116,7 +116,6 @@ batadv_tt_global_hash_find(struct batadv_priv *bat_priv, const void *data) struct batadv_tt_global_entry, common); return tt_global_entry; - } static void @@ -256,7 +255,6 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv, batadv_hash_remove(bat_priv->tt.global_hash, batadv_compare_tt, batadv_choose_orig, tt_global->common.addr); batadv_tt_global_entry_free_ref(tt_global); - } void batadv_tt_local_add(struct net_device *soft_iface, const uint8_t *addr, @@ -652,7 +650,6 @@ static void batadv_tt_local_purge(struct batadv_priv *bat_priv) batadv_tt_local_purge_list(bat_priv, head); spin_unlock_bh(list_lock); } - } static void batadv_tt_local_table_free(struct batadv_priv *bat_priv) @@ -1079,7 +1076,6 @@ batadv_tt_global_del_orig_list(struct batadv_tt_global_entry *tt_global_entry) batadv_tt_orig_list_entry_free_ref(orig_entry); } spin_unlock_bh(&tt_global_entry->list_lock); - } static void @@ -1855,7 +1851,6 @@ out: if (!ret) kfree_skb(skb); return ret; - } static bool @@ -2382,7 +2377,6 @@ static void batadv_tt_local_purge_pending_clients(struct batadv_priv *bat_priv) } spin_unlock_bh(list_lock); } - } static int batadv_tt_commit_changes(struct batadv_priv *bat_priv, @@ -2579,7 +2573,6 @@ bool batadv_tt_local_client_is_roaming(struct batadv_priv *bat_priv, batadv_tt_local_entry_free_ref(tt_local_entry); out: return ret; - } bool batadv_tt_add_temporary_global_entry(struct batadv_priv *bat_priv, diff --git a/net/batman-adv/unicast.c b/net/batman-adv/unicast.c index 10aff49..f56bccf 100644 --- a/net/batman-adv/unicast.c +++ b/net/batman-adv/unicast.c @@ -133,7 +133,6 @@ batadv_frag_search_packet(struct list_head *head, is_head = !!(up->flags & BATADV_UNI_FRAG_HEAD); list_for_each_entry(tfp, head, list) { - if (!tfp->skb) continue; @@ -162,7 +161,6 @@ void batadv_frag_list_free(struct list_head *head) struct batadv_frag_packet_list_entry *pf, *tmp_pf; if (!list_empty(head)) { - list_for_each_entry_safe(pf, tmp_pf, head, list) { kfree_skb(pf->skb); list_del(&pf->list); -- cgit v0.10.2 From 3f87c4239fa1df61beffbee2ca00e8ffbe31a5e3 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 29 Nov 2012 01:03:31 +0100 Subject: batman-adv: remove useless NULL check debugfs_remove_recursive() checks whether its argument is not null on its own, therefore it is possible to remove the external check. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 0049837..5136d32 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -396,10 +396,8 @@ err: void batadv_debugfs_destroy(void) { - if (batadv_debugfs) { - debugfs_remove_recursive(batadv_debugfs); - batadv_debugfs = NULL; - } + debugfs_remove_recursive(batadv_debugfs); + batadv_debugfs = NULL; } int batadv_debugfs_add_meshif(struct net_device *dev) -- cgit v0.10.2 From fa706554d6553331e886ce6fb86ca40b6dbc2083 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 26 Nov 2012 01:27:29 +0100 Subject: batman-adv: don't compile the BLA switch if not requested When the Bridge Loop Avoidance component is not compiled-in, its boolean switch should be not compiled as well. This patch surrounds the switch with a proper ifdef. This behaviour was introduced by 9fd6b0615b5499b270d39a92b8790e206cf75833 ("batman-adv: add bridge loop avoidance compile option") Signed-off-by: Antonio Quartulli Acked-by: Simon Wunderlich Signed-off-by: Marek Lindner diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index f8cc142..57714f8 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -480,7 +480,9 @@ struct net_device *batadv_softif_create(const char *name) atomic_set(&bat_priv->aggregated_ogms, 1); atomic_set(&bat_priv->bonding, 0); +#ifdef CONFIG_BATMAN_ADV_BLA atomic_set(&bat_priv->bridge_loop_avoidance, 0); +#endif #ifdef CONFIG_BATMAN_ADV_DAT atomic_set(&bat_priv->distributed_arp_table, 1); #endif diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index ae9ac9a..030ce41 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -273,7 +273,9 @@ struct batadv_priv { atomic_t bonding; /* boolean */ atomic_t fragmentation; /* boolean */ atomic_t ap_isolation; /* boolean */ +#ifdef CONFIG_BATMAN_ADV_BLA atomic_t bridge_loop_avoidance; /* boolean */ +#endif #ifdef CONFIG_BATMAN_ADV_DAT atomic_t distributed_arp_table; /* boolean */ #endif -- cgit v0.10.2 From 467b5fe69716257ebe17a9df9c428ad32eba540a Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 7 Dec 2012 14:35:36 +0100 Subject: batman-adv: use the const qualifier in hash functions The data argument in each hash function should carry the "const" qualifier as it is never modified. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 724adf0..5e834c1 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -57,7 +57,7 @@ static inline uint32_t batadv_choose_claim(const void *data, uint32_t size) static inline uint32_t batadv_choose_backbone_gw(const void *data, uint32_t size) { - struct batadv_claim *claim = (struct batadv_claim *)data; + const struct batadv_claim *claim = (struct batadv_claim *)data; uint32_t hash = 0; hash = batadv_hash_bytes(hash, &claim->addr, sizeof(claim->addr)); diff --git a/net/batman-adv/hash.h b/net/batman-adv/hash.h index e053339..ea02148 100644 --- a/net/batman-adv/hash.h +++ b/net/batman-adv/hash.h @@ -89,7 +89,7 @@ static inline void batadv_hash_delete(struct batadv_hashtable *hash, * * Returns the new hash value. */ -static inline uint32_t batadv_hash_bytes(uint32_t hash, void *data, +static inline uint32_t batadv_hash_bytes(uint32_t hash, const void *data, uint32_t size) { const unsigned char *key = data; -- cgit v0.10.2 From c0275e243c65be76a5e1352c58c8a4aeeb3854c6 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 11 Dec 2012 20:29:22 +0100 Subject: batman-adv: fix typo in debug message in bat_iv_ogm.c a debug message should print "tq" instead of "td" Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index d90e925..8f2de43 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -1028,7 +1028,7 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, is_single_hop_neigh = true; batadv_dbg(BATADV_DBG_BATMAN, bat_priv, - "Received BATMAN packet via NB: %pM, IF: %s [%pM] (from OG: %pM, via prev OG: %pM, seqno %u, ttvn %u, crc %#.4x, changes %u, td %d, TTL %d, V %d, IDF %d)\n", + "Received BATMAN packet via NB: %pM, IF: %s [%pM] (from OG: %pM, via prev OG: %pM, seqno %u, ttvn %u, crc %#.4x, changes %u, tq %d, TTL %d, V %d, IDF %d)\n", ethhdr->h_source, if_incoming->net_dev->name, if_incoming->net_dev->dev_addr, batadv_ogm_packet->orig, batadv_ogm_packet->prev_sender, -- cgit v0.10.2 From 9338026107166b54d54ef875978c9c3dca3aaee5 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Sat, 15 Dec 2012 19:09:11 +0800 Subject: batman-adv: remove unused variable from orig_node struct Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 030ce41..441880a 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -119,7 +119,6 @@ struct batadv_orig_node { spinlock_t ogm_cnt_lock; /* bcast_seqno_lock protects bcast_bits, last_bcast_seqno */ spinlock_t bcast_seqno_lock; - spinlock_t tt_list_lock; /* protects tt_list */ atomic_t bond_candidates; struct list_head bond_list; }; -- cgit v0.10.2 From 0c430d0d7b8bafa74959a84156ef0bda1417a3d4 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Sun, 16 Dec 2012 13:53:15 +0800 Subject: batman-adv: unbloat batadv_priv if debug is not enabled Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 5136d32..55a9007 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -229,7 +229,6 @@ static void batadv_debug_log_cleanup(struct batadv_priv *bat_priv) #else /* CONFIG_BATMAN_ADV_DEBUG */ static int batadv_debug_log_setup(struct batadv_priv *bat_priv) { - bat_priv->debug_log = NULL; return 0; } diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 57714f8..3d68166 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -493,7 +493,9 @@ struct net_device *batadv_softif_create(const char *name) atomic_set(&bat_priv->gw_bandwidth, 41); atomic_set(&bat_priv->orig_interval, 1000); atomic_set(&bat_priv->hop_penalty, 30); +#ifdef CONFIG_BATMAN_ADV_DEBUG atomic_set(&bat_priv->log_level, 0); +#endif atomic_set(&bat_priv->fragmentation, 1); atomic_set(&bat_priv->bcast_queue_left, BATADV_BCAST_QUEUE_LEN); atomic_set(&bat_priv->batman_queue_left, BATADV_BATMAN_QUEUE_LEN); diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 441880a..d8061ac 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -284,12 +284,16 @@ struct batadv_priv { atomic_t gw_bandwidth; /* gw bandwidth */ atomic_t orig_interval; /* uint */ atomic_t hop_penalty; /* uint */ +#ifdef CONFIG_BATMAN_ADV_DEBUG atomic_t log_level; /* uint */ +#endif atomic_t bcast_seqno; atomic_t bcast_queue_left; atomic_t batman_queue_left; char num_ifaces; +#ifdef CONFIG_BATMAN_ADV_DEBUG struct batadv_debug_log *debug_log; +#endif struct kobject *mesh_obj; struct dentry *debug_dir; struct hlist_head forw_bat_list; -- cgit v0.10.2 From 858ce0220922a52e009d17dcaaab5dfd76f9833b Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Sat, 12 Jan 2013 19:37:12 +0100 Subject: NFC: pn533: Fix bad allocation size Use dereferenced pointer in sizeof instead of pointer itself. Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index f1702f9..f696318 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -743,7 +743,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", cmd_code); - arg = kzalloc(sizeof(arg), GFP_KERNEL); + arg = kzalloc(sizeof(*arg), GFP_KERNEL); if (!arg) return -ENOMEM; @@ -863,7 +863,7 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, if (!resp) return -ENOMEM; - arg = kzalloc(sizeof(arg), GFP_KERNEL); + arg = kzalloc(sizeof(*arg), GFP_KERNEL); if (!arg) { dev_kfree_skb(resp); return -ENOMEM; -- cgit v0.10.2 From 3e4e4c1f2da66b29ee9379ca29f8dd620c2b5a1f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:01:39 +0000 Subject: ipv6: Introduce ip6_flow_hdr() to fill version, tclass and flowlabel. This is not only for readability but also for optimization. What we do here is to build the 32bit word at the beginning of the ipv6 header (the "ip6_flow" virtual member of struct ip6_hdr in RFC3542) and we do not need to read the tclass portion of the target buffer. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 5af66b2..fcbc646 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -547,6 +547,15 @@ static inline int ipv6_addr_diff(const struct in6_addr *a1, const struct in6_add extern void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt); /* + * Header manipulation + */ +static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, + __be32 flowlabel) +{ + *(__be32 *)hdr = ntohl(0x60000000 | (tclass << 20)) | flowlabel; +} + +/* * Prototypes exported by ipv6 */ diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index c727e47..db91fe3 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -772,9 +772,7 @@ static netdev_tx_t ip6gre_xmit2(struct sk_buff *skb, * Push down and install the IP header. */ ipv6h = ipv6_hdr(skb); - *(__be32 *)ipv6h = fl6->flowlabel | htonl(0x60000000); - dsfield = INET_ECN_encapsulate(0, dsfield); - ipv6_change_dsfield(ipv6h, ~INET_ECN_MASK, dsfield); + ip6_flow_hdr(ipv6h, INET_ECN_encapsulate(0, dsfield), fl6->flowlabel); ipv6h->hop_limit = tunnel->parms.hop_limit; ipv6h->nexthdr = proto; ipv6h->saddr = fl6->saddr; @@ -1240,7 +1238,7 @@ static int ip6gre_header(struct sk_buff *skb, struct net_device *dev, struct ipv6hdr *ipv6h = (struct ipv6hdr *)skb_push(skb, t->hlen); __be16 *p = (__be16 *)(ipv6h+1); - *(__be32 *)ipv6h = t->fl.u.ip6.flowlabel | htonl(0x60000000); + ip6_flow_hdr(ipv6h, 0, t->fl.u.ip6.flowlabel); ipv6h->hop_limit = t->parms.hop_limit; ipv6h->nexthdr = NEXTHDR_GRE; ipv6h->saddr = t->parms.laddr; diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 5552d13..9250c69 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -216,7 +216,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6, if (hlimit < 0) hlimit = ip6_dst_hoplimit(dst); - *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | fl6->flowlabel; + ip6_flow_hdr(hdr, tclass, fl6->flowlabel); hdr->payload_len = htons(seg_len); hdr->nexthdr = proto; @@ -267,7 +267,7 @@ int ip6_nd_hdr(struct sock *sk, struct sk_buff *skb, struct net_device *dev, skb_put(skb, sizeof(struct ipv6hdr)); hdr = ipv6_hdr(skb); - *(__be32*)hdr = htonl(0x60000000); + ip6_flow_hdr(hdr, 0, 0); hdr->payload_len = htons(len); hdr->nexthdr = proto; @@ -1548,9 +1548,7 @@ int ip6_push_pending_frames(struct sock *sk) skb_reset_network_header(skb); hdr = ipv6_hdr(skb); - *(__be32*)hdr = fl6->flowlabel | - htonl(0x60000000 | ((int)np->cork.tclass << 20)); - + ip6_flow_hdr(hdr, np->cork.tclass, fl6->flowlabel); hdr->hop_limit = np->cork.hop_limit; hdr->nexthdr = proto; hdr->saddr = fl6->saddr; diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index a14f28b..fff83cb 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1030,9 +1030,7 @@ static int ip6_tnl_xmit2(struct sk_buff *skb, skb_push(skb, sizeof(struct ipv6hdr)); skb_reset_network_header(skb); ipv6h = ipv6_hdr(skb); - *(__be32*)ipv6h = fl6->flowlabel | htonl(0x60000000); - dsfield = INET_ECN_encapsulate(0, dsfield); - ipv6_change_dsfield(ipv6h, ~INET_ECN_MASK, dsfield); + ip6_flow_hdr(ipv6h, INET_ECN_encapsulate(0, dsfield), fl6->flowlabel); ipv6h->hop_limit = t->parms.hop_limit; ipv6h->nexthdr = proto; ipv6h->saddr = fl6->saddr; diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c index fd4fb34..8e75b6f 100644 --- a/net/ipv6/netfilter/ip6t_REJECT.c +++ b/net/ipv6/netfilter/ip6t_REJECT.c @@ -126,7 +126,7 @@ static void send_reset(struct net *net, struct sk_buff *oldskb) skb_put(nskb, sizeof(struct ipv6hdr)); skb_reset_network_header(nskb); ip6h = ipv6_hdr(nskb); - *(__be32 *)ip6h = htonl(0x60000000 | (tclass << 20)); + ip6_flow_hdr(ip6h, tclass, 0); ip6h->hop_limit = ip6_dst_hoplimit(dst); ip6h->nexthdr = IPPROTO_TCP; ip6h->saddr = oip6h->daddr; -- cgit v0.10.2 From 6502ca527f8ed2c3bb327d9db8e7e6e7dcbef511 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:01:51 +0000 Subject: ipv6: Introduce ip6_flowinfo() to extract flowinfo (tclass + flowlabel). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index fcbc646..ed67208 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -555,6 +555,11 @@ static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, *(__be32 *)hdr = ntohl(0x60000000 | (tclass << 20)) | flowlabel; } +static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) +{ + return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; +} + /* * Prototypes exported by ipv6 */ diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 56b692b..7f65df4 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -360,7 +360,7 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) struct ipv6hdr, daddr); sin->sin6_addr = ip6h->daddr; if (np->sndflow) - sin->sin6_flowinfo = *(__be32 *)ip6h & IPV6_FLOWINFO_MASK; + sin->sin6_flowinfo = ip6_flowinfo(ip6h); if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL) sin->sin6_scope_id = IP6CB(skb)->iif; } else { @@ -491,9 +491,10 @@ int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb) put_cmsg(msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass); } - if (np->rxopt.bits.rxflow && (*(__be32 *)nh & IPV6_FLOWINFO_MASK)) { - __be32 flowinfo = *(__be32 *)nh & IPV6_FLOWINFO_MASK; - put_cmsg(msg, SOL_IPV6, IPV6_FLOWINFO, sizeof(flowinfo), &flowinfo); + if (np->rxopt.bits.rxflow) { + __be32 flowinfo = ip6_flowinfo((struct ipv6hdr *)nh); + if (flowinfo) + put_cmsg(msg, SOL_IPV6, IPV6_FLOWINFO, sizeof(flowinfo), &flowinfo); } /* HbH is allowed only once */ diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 621b68e..6238eb5 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -994,7 +994,7 @@ void ip6_route_input(struct sk_buff *skb) .flowi6_iif = skb->dev->ifindex, .daddr = iph->daddr, .saddr = iph->saddr, - .flowlabel = (* (__be32 *) iph) & IPV6_FLOWINFO_MASK, + .flowlabel = ip6_flowinfo(iph), .flowi6_mark = skb->mark, .flowi6_proto = iph->nexthdr, }; @@ -1159,7 +1159,7 @@ void ip6_update_pmtu(struct sk_buff *skb, struct net *net, __be32 mtu, fl6.flowi6_flags = 0; fl6.daddr = iph->daddr; fl6.saddr = iph->saddr; - fl6.flowlabel = (*(__be32 *) iph) & IPV6_FLOWINFO_MASK; + fl6.flowlabel = ip6_flowinfo(iph); dst = ip6_route_output(net, NULL, &fl6); if (!dst->error) @@ -1187,7 +1187,7 @@ void ip6_redirect(struct sk_buff *skb, struct net *net, int oif, u32 mark) fl6.flowi6_flags = 0; fl6.daddr = iph->daddr; fl6.saddr = iph->saddr; - fl6.flowlabel = (*(__be32 *) iph) & IPV6_FLOWINFO_MASK; + fl6.flowlabel = ip6_flowinfo(iph); dst = ip6_route_output(net, NULL, &fl6); if (!dst->error) -- cgit v0.10.2 From e7219858ac1f98213a4714d0e24e7a003e1bf6a2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:02:01 +0000 Subject: ipv6: Use ipv6_get_dsfield() instead of ipv6_tclass(). Commit 7a3198a8 ("ipv6: helper function to get tclass") introduced ipv6_tclass(), but similar function is already available as ipv6_get_dsfield(). We might be able to call ipv6_tclass() from ipv6_get_dsfield(), but it is confusing to have two versions. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index faed1e3..304a9f4 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -77,11 +77,6 @@ static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb) return (struct ipv6hdr *)skb_transport_header(skb); } -static inline __u8 ipv6_tclass(const struct ipv6hdr *iph) -{ - return (ntohl(*(__be32 *)iph) >> 20) & 0xff; -} - /* This structure contains results of exthdrs parsing as offsets from skb->nh. diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 7f65df4..33be363 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -487,7 +488,7 @@ int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb) } if (np->rxopt.bits.rxtclass) { - int tclass = ipv6_tclass(ipv6_hdr(skb)); + int tclass = ipv6_get_dsfield(ipv6_hdr(skb)); put_cmsg(msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass); } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 3164ad2..3701c3c 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1163,7 +1163,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, newnp->opt = NULL; newnp->mcast_oif = inet6_iif(skb); newnp->mcast_hops = ipv6_hdr(skb)->hop_limit; - newnp->rcv_tclass = ipv6_tclass(ipv6_hdr(skb)); + newnp->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); /* * No need to charge this sock to the relevant IPv6 refcnt debug socks count @@ -1243,7 +1243,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, newnp->opt = NULL; newnp->mcast_oif = inet6_iif(skb); newnp->mcast_hops = ipv6_hdr(skb)->hop_limit; - newnp->rcv_tclass = ipv6_tclass(ipv6_hdr(skb)); + newnp->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); /* Clone native IPv6 options from listening socket (if any) @@ -1456,7 +1456,7 @@ ipv6_pktoptions: if (np->rxopt.bits.rxhlim || np->rxopt.bits.rxohlim) np->mcast_hops = ipv6_hdr(opt_skb)->hop_limit; if (np->rxopt.bits.rxtclass) - np->rcv_tclass = ipv6_tclass(ipv6_hdr(skb)); + np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); if (ipv6_opt_accepted(sk, opt_skb)) { skb_set_owner_r(opt_skb, sk); opt_skb = xchg(&np->pktoptions, opt_skb); -- cgit v0.10.2 From daad151263cf334d57fcc0270e2483d4b4639650 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:02:18 +0000 Subject: ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input(). Move generalized version of ipv6_is_mld() to header, and use it from ip6_mc_input(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/addrconf.h b/include/net/addrconf.h index df4ef94..7cd14c0 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -150,7 +150,31 @@ extern void addrconf_dad_failure(struct inet6_ifaddr *ifp); extern bool ipv6_chk_mcast_addr(struct net_device *dev, const struct in6_addr *group, const struct in6_addr *src_addr); -extern bool ipv6_is_mld(struct sk_buff *skb, int nexthdr); + +/* + * identify MLD packets for MLD filter exceptions + */ +static inline bool ipv6_is_mld(struct sk_buff *skb, int nexthdr, int offset) +{ + struct icmp6hdr *hdr; + + if (nexthdr != IPPROTO_ICMPV6 || + !pskb_network_may_pull(skb, offset + sizeof(struct icmp6hdr))) + return false; + + hdr = (struct icmp6hdr *)(skb_network_header(skb) + offset); + + switch (hdr->icmp6_type) { + case ICMPV6_MGM_QUERY: + case ICMPV6_MGM_REPORT: + case ICMPV6_MGM_REDUCTION: + case ICMPV6_MLD2_REPORT: + return true; + default: + break; + } + return false; +} extern void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao); diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index a52d864..2ccd35e 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -212,7 +212,7 @@ resubmit: if (ipv6_addr_is_multicast(&hdr->daddr) && !ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, &hdr->saddr) && - !ipv6_is_mld(skb, nexthdr)) + !ipv6_is_mld(skb, nexthdr, skb_network_header_len(skb))) goto discard; } if (!(ipprot->flags & INET6_PROTO_NOPOLICY) && @@ -283,7 +283,6 @@ int ip6_mc_input(struct sk_buff *skb) if (unlikely(opt->ra)) { /* Check if this is a mld message */ u8 *ptr = skb_network_header(skb) + opt->ra; - struct icmp6hdr *icmp6; u8 nexthdr = hdr->nexthdr; __be16 frag_off; int offset; @@ -303,24 +302,10 @@ int ip6_mc_input(struct sk_buff *skb) if (offset < 0) goto out; - if (nexthdr != IPPROTO_ICMPV6) + if (!ipv6_is_mld(skb, nexthdr, offset)) goto out; - if (!pskb_may_pull(skb, (skb_network_header(skb) + - offset + 1 - skb->data))) - goto out; - - icmp6 = (struct icmp6hdr *)(skb_network_header(skb) + offset); - - switch (icmp6->icmp6_type) { - case ICMPV6_MGM_QUERY: - case ICMPV6_MGM_REPORT: - case ICMPV6_MGM_REDUCTION: - case ICMPV6_MLD2_REPORT: - deliver = true; - break; - } - goto out; + deliver = true; } /* unknown RA - process it normally */ } diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 28dfa5f..8237ee1 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -935,33 +935,6 @@ int ipv6_dev_mc_dec(struct net_device *dev, const struct in6_addr *addr) } /* - * identify MLD packets for MLD filter exceptions - */ -bool ipv6_is_mld(struct sk_buff *skb, int nexthdr) -{ - struct icmp6hdr *pic; - - if (nexthdr != IPPROTO_ICMPV6) - return false; - - if (!pskb_may_pull(skb, sizeof(struct icmp6hdr))) - return false; - - pic = icmp6_hdr(skb); - - switch (pic->icmp6_type) { - case ICMPV6_MGM_QUERY: - case ICMPV6_MGM_REPORT: - case ICMPV6_MGM_REDUCTION: - case ICMPV6_MLD2_REPORT: - return true; - default: - break; - } - return false; -} - -/* * check if the interface/address pair is valid */ bool ipv6_chk_mcast_addr(struct net_device *dev, const struct in6_addr *group, -- cgit v0.10.2 From c08977bb2b198cca1827d982b0c137458f4c2927 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:02:29 +0000 Subject: ipv6 route: Use ipv6_addr_hash() in rt6_info_hash_nhsfn(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 6238eb5..34f392f0 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -388,15 +388,8 @@ static int rt6_info_hash_nhsfn(unsigned int candidate_count, { unsigned int val = fl6->flowi6_proto; - val ^= (__force u32)fl6->daddr.s6_addr32[0]; - val ^= (__force u32)fl6->daddr.s6_addr32[1]; - val ^= (__force u32)fl6->daddr.s6_addr32[2]; - val ^= (__force u32)fl6->daddr.s6_addr32[3]; - - val ^= (__force u32)fl6->saddr.s6_addr32[0]; - val ^= (__force u32)fl6->saddr.s6_addr32[1]; - val ^= (__force u32)fl6->saddr.s6_addr32[2]; - val ^= (__force u32)fl6->saddr.s6_addr32[3]; + val ^= ipv6_addr_hash(&fl6->daddr); + val ^= ipv6_addr_hash(&fl6->saddr); /* Work only if this not encapsulated */ switch (fl6->flowi6_proto) { -- cgit v0.10.2 From 2b464f61f036f7fb9cbc34710c9b2390499e87d0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:02:38 +0000 Subject: ipv6 xfrm: Use ipv6_addr_hash() in xfrm6_tunnel_spi_hash_byaddr(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c index ee5a706..babd167 100644 --- a/net/ipv6/xfrm6_tunnel.c +++ b/net/ipv6/xfrm6_tunnel.c @@ -72,7 +72,7 @@ static inline unsigned int xfrm6_tunnel_spi_hash_byaddr(const xfrm_address_t *ad { unsigned int h; - h = (__force u32)(addr->a6[0] ^ addr->a6[1] ^ addr->a6[2] ^ addr->a6[3]); + h = ipv6_addr_hash((const struct in6_addr *)addr); h ^= h >> 16; h ^= h >> 8; h &= XFRM6_TUNNEL_SPI_BYADDR_HSIZE - 1; -- cgit v0.10.2 From dd3332bfcb2223458f553f341d3388cb84040e6a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 05:02:45 +0000 Subject: ipv6: Store Router Alert option in IP6CB directly. Router Alert option is very small and we can store the value itself in the skb. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 304a9f4..e971e37 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -84,7 +84,7 @@ static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb) struct inet6_skb_parm { int iif; - __u16 ra; + __be16 ra; __u16 hop; __u16 dst0; __u16 srcrt; @@ -100,6 +100,7 @@ struct inet6_skb_parm { #define IP6SKB_XFRM_TRANSFORMED 1 #define IP6SKB_FORWARDED 2 #define IP6SKB_REROUTED 4 +#define IP6SKB_ROUTERALERT 8 }; #define IP6CB(skb) ((struct inet6_skb_parm*)((skb)->cb)) diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 5a2991c..4bda4cf 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -63,6 +63,8 @@ struct ipv6_opt_hdr { #define ipv6_destopt_hdr ipv6_opt_hdr #define ipv6_hopopt_hdr ipv6_opt_hdr +/* Router Alert option values (RFC2711) */ +#define IPV6_OPT_ROUTERALERT_MLD 0x0000 /* MLD(RFC2710) */ /* * routing header type 0 (used in cmsghdr struct) diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 473f628..07a7d65 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -553,7 +553,8 @@ static bool ipv6_hop_ra(struct sk_buff *skb, int optoff) const unsigned char *nh = skb_network_header(skb); if (nh[optoff + 1] == 2) { - IP6CB(skb)->ra = optoff; + IP6CB(skb)->flags |= IP6SKB_ROUTERALERT; + memcpy(&IP6CB(skb)->ra, nh + optoff + 2, sizeof(IP6CB(skb)->ra)); return true; } LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_ra: wrong RA length %d\n", diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 2ccd35e..4ac5bf3 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -280,9 +280,8 @@ int ip6_mc_input(struct sk_buff *skb) struct inet6_skb_parm *opt = IP6CB(skb); /* Check for MLD */ - if (unlikely(opt->ra)) { + if (unlikely(opt->flags & IP6SKB_ROUTERALERT)) { /* Check if this is a mld message */ - u8 *ptr = skb_network_header(skb) + opt->ra; u8 nexthdr = hdr->nexthdr; __be16 frag_off; int offset; @@ -290,7 +289,7 @@ int ip6_mc_input(struct sk_buff *skb) /* Check if the value of Router Alert * is for MLD (0x0000). */ - if ((ptr[2] | ptr[3]) == 0) { + if (opt->ra == htons(IPV6_OPT_ROUTERALERT_MLD)) { deliver = false; if (!ipv6_ext_hdr(nexthdr)) { -- cgit v0.10.2 From 25d46f43a911b08c5aa8c8fd4fe7fa9b36445068 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 13 Jan 2013 16:02:06 +0000 Subject: ipv6: Move comment to right place. IN6ADDR_* and in6addr_* are not exported to userspace, and are defined in include/linux/in6.h. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/linux/in6.h b/include/linux/in6.h index 9e2ae26..a16e193 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -22,6 +22,10 @@ #include +/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 + * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined + * in network byte order, not in host byte order as are the IPv4 equivalents + */ extern const struct in6_addr in6addr_any; #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } } extern const struct in6_addr in6addr_loopback; diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index f79c372..5673b97 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -38,11 +38,6 @@ struct in6_addr { #define s6_addr32 in6_u.u6_addr32 }; -/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined - * in network byte order, not in host byte order as are the IPv4 equivalents - */ - struct sockaddr_in6 { unsigned short int sin6_family; /* AF_INET6 */ __be16 sin6_port; /* Transport layer port # */ -- cgit v0.10.2 From 0c0280bd0ba410326eecdaeb1b936696eda6381d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 11 Jan 2013 18:39:36 +0000 Subject: wireless: make the reg_notifier() void The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 30ca0a6..1d264c0 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -240,13 +240,14 @@ static const struct ath_ops ath5k_common_ops = { * Driver Initialization * \***********************/ -static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) +static void ath5k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath5k_hw *ah = hw->priv; struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); - return ath_reg_notifier_apply(wiphy, request, regulatory); + ath_reg_notifier_apply(wiphy, request, regulatory); } /********************\ diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 5516a8c..4225cca 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -3492,8 +3492,8 @@ void ath6kl_cfg80211_stop_all(struct ath6kl *ar) ath6kl_cfg80211_stop(vif); } -static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, - struct regulatory_request *request) +static void ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, + struct regulatory_request *request) { struct ath6kl *ar = wiphy_priv(wiphy); u32 rates[IEEE80211_NUM_BANDS]; @@ -3506,17 +3506,13 @@ static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, request->processed ? " processed" : "", request->initiator, request->user_reg_hint_type); - /* - * As firmware is not able intersect regdoms, we can only listen to - * cellular hints. - */ if (request->user_reg_hint_type != NL80211_USER_REG_HINT_CELL_BASE) - return -EOPNOTSUPP; + return; ret = ath6kl_wmi_set_regdomain_cmd(ar->wmi, request->alpha2); if (ret) { ath6kl_err("failed to set regdomain: %d\n", ret); - return ret; + return; } /* @@ -3536,10 +3532,8 @@ static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, if (ret) { ath6kl_err("failed to start scan for a regdomain change: %d\n", ret); - return ret; + return; } - - return 0; } static int ath6kl_cfg80211_vif_init(struct ath6kl_vif *vif) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 05d5ba6..e5d7958 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -280,14 +280,14 @@ err: return ret; } -static int ath9k_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void ath9k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath9k_htc_priv *priv = hw->priv; - return ath_reg_notifier_apply(wiphy, request, - ath9k_hw_regulatory(priv->ah)); + ath_reg_notifier_apply(wiphy, request, + ath9k_hw_regulatory(priv->ah)); } static unsigned int ath9k_regread(void *hw_priv, u32 reg_offset) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index f69ef5d..315d659 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -302,16 +302,15 @@ static void setup_ht_cap(struct ath_softc *sc, ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; } -static int ath9k_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void ath9k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath_softc *sc = hw->priv; struct ath_hw *ah = sc->sc_ah; struct ath_regulatory *reg = ath9k_hw_regulatory(ah); - int ret; - ret = ath_reg_notifier_apply(wiphy, request, reg); + ath_reg_notifier_apply(wiphy, request, reg); /* Set tx power */ if (ah->curchan) { @@ -321,8 +320,6 @@ static int ath9k_reg_notifier(struct wiphy *wiphy, sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit; ath9k_ps_restore(sc); } - - return ret; } /* diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 9d2051a..aaa2699 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1918,13 +1918,13 @@ static int carl9170_parse_eeprom(struct ar9170 *ar) return 0; } -static int carl9170_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void carl9170_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ar9170 *ar = hw->priv; - return ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory); + ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory); } int carl9170_register(struct ar9170 *ar) diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 7a6c79e..ccc4c71 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -356,9 +356,9 @@ static u16 ath_regd_find_country_by_name(char *alpha2) return -1; } -int ath_reg_notifier_apply(struct wiphy *wiphy, - struct regulatory_request *request, - struct ath_regulatory *reg) +void ath_reg_notifier_apply(struct wiphy *wiphy, + struct regulatory_request *request, + struct ath_regulatory *reg) { struct ath_common *common = container_of(reg, struct ath_common, regulatory); @@ -373,7 +373,7 @@ int ath_reg_notifier_apply(struct wiphy *wiphy, * any pending requests in the queue. */ if (!request) - return 0; + return; switch (request->initiator) { case NL80211_REGDOM_SET_BY_CORE: @@ -409,8 +409,6 @@ int ath_reg_notifier_apply(struct wiphy *wiphy, break; } - - return 0; } EXPORT_SYMBOL(ath_reg_notifier_apply); @@ -500,8 +498,8 @@ ath_get_regpair(int regdmn) static int ath_regd_init_wiphy(struct ath_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request)) + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request)) { const struct ieee80211_regdomain *regd; @@ -621,8 +619,8 @@ static int __ath_regd_init(struct ath_regulatory *reg) int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request)) + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request)) { struct ath_common *common = container_of(reg, struct ath_common, regulatory); diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h index 03a8268..37f53bd 100644 --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h @@ -252,12 +252,12 @@ enum CountryCode { bool ath_is_world_regd(struct ath_regulatory *reg); bool ath_is_49ghz_allowed(u16 redomain); int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request)); + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request)); u32 ath_regd_get_band_ctl(struct ath_regulatory *reg, enum ieee80211_band band); -int ath_reg_notifier_apply(struct wiphy *wiphy, - struct regulatory_request *request, - struct ath_regulatory *reg); +void ath_reg_notifier_apply(struct wiphy *wiphy, + struct regulatory_request *request, + struct ath_regulatory *reg); #endif diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 4eb3f0d..cdb62b8 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -702,8 +702,8 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, } } -static int brcms_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void brcms_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct brcms_info *wl = hw->priv; @@ -744,8 +744,6 @@ static int brcms_reg_notifier(struct wiphy *wiphy, if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G) wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi, brcms_c_japan_ccode(request->alpha2)); - - return 0; } void brcms_c_regd_init(struct brcms_c_info *wlc) diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index ec6d5d6..230f8eb 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -2132,6 +2132,21 @@ static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) lbs_deb_leave(LBS_DEB_CFG80211); } +static void lbs_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " + "callback for domain %c%c\n", request->alpha2[0], + request->alpha2[1]); + + memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); + if (lbs_iface_active(priv)) + lbs_set_11d_domain_info(priv); + + lbs_deb_leave(LBS_DEB_CFG80211); +} /* * This function get's called after lbs_setup_firmware() determined the @@ -2184,24 +2199,6 @@ int lbs_cfg_register(struct lbs_private *priv) return ret; } -int lbs_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) -{ - struct lbs_private *priv = wiphy_priv(wiphy); - int ret = 0; - - lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " - "callback for domain %c%c\n", request->alpha2[0], - request->alpha2[1]); - - memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); - if (lbs_iface_active(priv)) - ret = lbs_set_11d_domain_info(priv); - - lbs_deb_leave(LBS_DEB_CFG80211); - return ret; -} - void lbs_scan_deinit(struct lbs_private *priv) { lbs_deb_enter(LBS_DEB_CFG80211); diff --git a/drivers/net/wireless/libertas/cfg.h b/drivers/net/wireless/libertas/cfg.h index 558168c..10995f5 100644 --- a/drivers/net/wireless/libertas/cfg.h +++ b/drivers/net/wireless/libertas/cfg.h @@ -10,9 +10,6 @@ struct wireless_dev *lbs_cfg_alloc(struct device *dev); int lbs_cfg_register(struct lbs_private *priv); void lbs_cfg_free(struct lbs_private *priv); -int lbs_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request); - void lbs_send_disconnect_notification(struct lbs_private *priv); void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a875499..a838dde 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -519,8 +519,8 @@ static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy) * - Set by user * - Set bt Country IE */ -static int mwifiex_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void mwifiex_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); @@ -540,8 +540,6 @@ static int mwifiex_reg_notifier(struct wiphy *wiphy, break; } mwifiex_send_domain_info_cmd_fw(wiphy); - - return 0; } /* diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index 7e3ead7..d7d0d49 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -298,9 +298,9 @@ static void _rtl_reg_apply_world_flags(struct wiphy *wiphy, return; } -static int _rtl_reg_notifier_apply(struct wiphy *wiphy, - struct regulatory_request *request, - struct rtl_regulatory *reg) +static void _rtl_reg_notifier_apply(struct wiphy *wiphy, + struct regulatory_request *request, + struct rtl_regulatory *reg) { /* We always apply this */ _rtl_reg_apply_radar_flags(wiphy); @@ -314,8 +314,6 @@ static int _rtl_reg_notifier_apply(struct wiphy *wiphy, _rtl_reg_apply_world_flags(wiphy, request->initiator, reg); break; } - - return 0; } static const struct ieee80211_regdomain *_rtl_regdomain_select( @@ -348,9 +346,9 @@ static const struct ieee80211_regdomain *_rtl_regdomain_select( static int _rtl_regd_init_wiphy(struct rtl_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier) (struct wiphy *wiphy, - struct regulatory_request * - request)) + void (*reg_notifier) (struct wiphy *wiphy, + struct regulatory_request * + request)) { const struct ieee80211_regdomain *regd; @@ -379,7 +377,7 @@ static struct country_code_to_enum_rd *_rtl_regd_find_country(u16 countrycode) } int rtl_regd_init(struct ieee80211_hw *hw, - int (*reg_notifier) (struct wiphy *wiphy, + void (*reg_notifier) (struct wiphy *wiphy, struct regulatory_request *request)) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -421,12 +419,12 @@ int rtl_regd_init(struct ieee80211_hw *hw, return 0; } -int rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) +void rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct rtl_priv *rtlpriv = rtl_priv(hw); RT_TRACE(rtlpriv, COMP_REGD, DBG_LOUD, "\n"); - return _rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd); + _rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd); } diff --git a/drivers/net/wireless/rtlwifi/regd.h b/drivers/net/wireless/rtlwifi/regd.h index 70ef2f4..4e1f4f00 100644 --- a/drivers/net/wireless/rtlwifi/regd.h +++ b/drivers/net/wireless/rtlwifi/regd.h @@ -55,7 +55,7 @@ enum country_code_type_t { }; int rtl_regd_init(struct ieee80211_hw *hw, - int (*reg_notifier) (struct wiphy *wiphy, - struct regulatory_request *request)); -int rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request); + void (*reg_notifier) (struct wiphy *wiphy, + struct regulatory_request *request)); +void rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request); #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d7de063..ce6e62a 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -89,8 +89,8 @@ static int wl12xx_set_authorized(struct wl1271 *wl, return 0; } -static int wl1271_reg_notify(struct wiphy *wiphy, - struct regulatory_request *request) +static void wl1271_reg_notify(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_supported_band *band; struct ieee80211_channel *ch; @@ -107,8 +107,6 @@ static int wl1271_reg_notify(struct wiphy *wiphy, IEEE80211_CHAN_PASSIVE_SCAN; } - - return 0; } static int wl1271_set_rx_streaming(struct wl1271 *wl, struct wl12xx_vif *wlvif, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e5f085c..4275127 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2364,8 +2364,8 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); /* fields below are read-only, assigned by cfg80211 */ -- cgit v0.10.2 From d3710e74cf329839dea8d13b1ad56e572b06b173 Mon Sep 17 00:00:00 2001 From: Lauro Ramos Venancio Date: Wed, 5 Dec 2012 21:12:25 -0300 Subject: NFC: Change nfc.h license nfc.h being GPL makes it quite controversial for non GPL applications to include it. Moreover, nfc.h only includes structures and API definitions that are hardly copyrightable. Signed-off-by: Lauro Ramos Venancio Signed-off-by: Samuel Ortiz diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 80e4ecd..7969f46 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -5,20 +5,17 @@ * Lauro Ramos Venancio * Aloisio Almeida Jr * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef __LINUX_NFC_H -- cgit v0.10.2 From 9f2e73345ad9466618edfec35d98c074f2e0570d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 07:09:54 +0000 Subject: ipv6: 64bit version of ipv6_addr_diff(). Introduce __ipv6_addr_diff64() to to find the first different bit between two addresses on 64bit architectures. 32bit version is still available as __ipv6_addr_diff32(), and __ipv6_addr_diff() automatically selects appropriate version. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index ed67208..ace1113 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -507,7 +507,7 @@ static inline void ipv6_addr_set_v4mapped(const __be32 addr, * find the first different bit between two addresses * length of address must be a multiple of 32bits */ -static inline int __ipv6_addr_diff(const void *token1, const void *token2, int addrlen) +static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) { const __be32 *a1 = token1, *a2 = token2; int i; @@ -539,6 +539,33 @@ static inline int __ipv6_addr_diff(const void *token1, const void *token2, int a return addrlen << 5; } +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 +static inline int __ipv6_addr_diff64(const void *token1, const void *token2, int addrlen) +{ + const __be64 *a1 = token1, *a2 = token2; + int i; + + addrlen >>= 3; + + for (i = 0; i < addrlen; i++) { + __be64 xb = a1[i] ^ a2[i]; + if (xb) + return i * 64 + 63 - __fls(be64_to_cpu(xb)); + } + + return addrlen << 6; +} +#endif + +static inline int __ipv6_addr_diff(const void *token1, const void *token2, int addrlen) +{ +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 + if (__builtin_constant_p(addrlen) && !(addrlen & 7)) + return __ipv6_addr_diff64(token1, token2, addrlen); +#endif + return __ipv6_addr_diff32(token1, token2, addrlen); +} + static inline int ipv6_addr_diff(const struct in6_addr *a1, const struct in6_addr *a2) { return __ipv6_addr_diff(a1, a2, sizeof(struct in6_addr)); -- cgit v0.10.2 From e287656b365f8db4486371c76ea54cbdbed7129c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 07:10:06 +0000 Subject: ipv6: 64bit version of ipv6_addr_loopback(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index ace1113..c5049b0 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -475,8 +475,14 @@ static inline u32 ipv6_addr_hash(const struct in6_addr *a) static inline bool ipv6_addr_loopback(const struct in6_addr *a) { +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 + const unsigned long *ul = (const unsigned long *)a; + + return (ul[0] | (ul[1] ^ cpu_to_be64(1))) == 0UL; +#else return (a->s6_addr32[0] | a->s6_addr32[1] | a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0; +#endif } static inline bool ipv6_addr_v4mapped(const struct in6_addr *a) -- cgit v0.10.2 From a04d40b8956010d2a6a7abc9254792c8f8649242 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 07:10:14 +0000 Subject: ipv6: 64bit version of ipv6_addr_v4mapped(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index c5049b0..77cef332 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -487,8 +487,13 @@ static inline bool ipv6_addr_loopback(const struct in6_addr *a) static inline bool ipv6_addr_v4mapped(const struct in6_addr *a) { - return (a->s6_addr32[0] | a->s6_addr32[1] | - (a->s6_addr32[2] ^ htonl(0x0000ffff))) == 0; + return ( +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 + *(__be64 *)a | +#else + (a->s6_addr32[0] | a->s6_addr32[1]) | +#endif + (a->s6_addr32[2] ^ htonl(0x0000ffff))) == 0UL; } /* -- cgit v0.10.2 From 5206c579da0f5b93c3ae17bd8010d8dbd9fcdbe9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 07:10:24 +0000 Subject: ipv6: 64bit version of ipv6_addr_set(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 77cef332..fb7f7c6 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -355,14 +355,32 @@ static inline void ipv6_addr_prefix(struct in6_addr *pfx, pfx->s6_addr[o] = addr->s6_addr[o] & (0xff00 >> b); } +static inline void __ipv6_addr_set_half(__be32 *addr, + __be32 wh, __be32 wl) +{ +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 +#if defined(__BIG_ENDIAN) + if (__builtin_constant_p(wh) && __builtin_constant_p(wl)) { + *(__force u64 *)addr = ((__force u64)(wh) << 32 | (__force u64)(wl)); + return; + } +#elif defined(__LITTLE_ENDIAN) + if (__builtin_constant_p(wl) && __builtin_constant_p(wh)) { + *(__force u64 *)addr = ((__force u64)(wl) << 32 | (__force u64)(wh)); + return; + } +#endif +#endif + addr[0] = wh; + addr[1] = wl; +} + static inline void ipv6_addr_set(struct in6_addr *addr, __be32 w1, __be32 w2, __be32 w3, __be32 w4) { - addr->s6_addr32[0] = w1; - addr->s6_addr32[1] = w2; - addr->s6_addr32[2] = w3; - addr->s6_addr32[3] = w4; + __ipv6_addr_set_half(&addr->s6_addr32[0], w1, w2); + __ipv6_addr_set_half(&addr->s6_addr32[2], w3, w4); } static inline bool ipv6_addr_equal(const struct in6_addr *a1, -- cgit v0.10.2 From 2ef973320349cd536b33427aed98512e532d4cc6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 07:10:31 +0000 Subject: ipv6: Remove __ipv6_prefix_equal(). ipv6_prefix_equal() just casts its arguments and it is the only user of __ipv6_prefix_equal(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index fb7f7c6..fe95053 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -399,9 +399,12 @@ static inline bool ipv6_addr_equal(const struct in6_addr *a1, #endif } -static inline bool __ipv6_prefix_equal(const __be32 *a1, const __be32 *a2, - unsigned int prefixlen) +static inline bool ipv6_prefix_equal(const struct in6_addr *addr1, + const struct in6_addr *addr2, + unsigned int prefixlen) { + const __be32 *a1 = addr1->s6_addr32; + const __be32 *a2 = addr2->s6_addr32; unsigned int pdw, pbi; /* check complete u32 in prefix */ @@ -417,14 +420,6 @@ static inline bool __ipv6_prefix_equal(const __be32 *a1, const __be32 *a2, return true; } -static inline bool ipv6_prefix_equal(const struct in6_addr *a1, - const struct in6_addr *a2, - unsigned int prefixlen) -{ - return __ipv6_prefix_equal(a1->s6_addr32, a2->s6_addr32, - prefixlen); -} - struct inet_frag_queue; enum ip6_defrag_users { -- cgit v0.10.2 From 38675170e4235f859bb85564c33ffa077a1c1ef7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 07:10:38 +0000 Subject: ipv6: 64bit version of ipv6_prefix_equal(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index fe95053..dfc1363 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -399,6 +399,31 @@ static inline bool ipv6_addr_equal(const struct in6_addr *a1, #endif } +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 +static inline bool __ipv6_prefix_equal64_half(const __be64 *a1, + const __be64 *a2, + unsigned int len) +{ + if (len && ((*a1 ^ *a2) & cpu_to_be64(~0UL) << (64 - len))) + return false; + return true; +} + +static inline bool ipv6_prefix_equal(const struct in6_addr *addr1, + const struct in6_addr *addr2, + unsigned int prefixlen) +{ + const __be64 *a1 = (const __be64 *)addr1; + const __be64 *a2 = (const __be64 *)addr2; + + if (prefixlen >= 64) { + if (a1[0] ^ a2[0]) + return false; + return __ipv6_prefix_equal64_half(a1 + 1, a2 + 1, prefixlen - 64); + } + return __ipv6_prefix_equal64_half(a1, a2, prefixlen); +} +#else static inline bool ipv6_prefix_equal(const struct in6_addr *addr1, const struct in6_addr *addr2, unsigned int prefixlen) @@ -419,6 +444,7 @@ static inline bool ipv6_prefix_equal(const struct in6_addr *addr1, return true; } +#endif struct inet_frag_queue; -- cgit v0.10.2 From a66f566afc3a06f7588cd7a2c93125fce494162b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 13 Jan 2013 18:55:05 +0000 Subject: drivers/net: Clean up orphaned probes in Space.c The removal of the 8390 EISA drivers actually comprises the complete content of the EISA probe block, so we can now remove that block, and its hook into the unified probe. Note that the deleted comment mentions PCI probes, but they long since moved elsewhere, so no PCI probes are touched here. We get rid of the orphaned EISA probe prototypes, and a couple of left over MCA probe prototypes at the same time. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/Space.c b/drivers/net/Space.c index e3f0fac..5637c26 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -37,10 +37,8 @@ ethernet adaptor have the name "eth[0123...]". */ -extern struct net_device *ne2_probe(int unit); extern struct net_device *hp100_probe(int unit); extern struct net_device *ultra_probe(int unit); -extern struct net_device *ultra32_probe(int unit); extern struct net_device *wd_probe(int unit); extern struct net_device *el2_probe(int unit); extern struct net_device *ne_probe(int unit); @@ -55,11 +53,7 @@ extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); extern struct net_device *el1_probe(int unit); extern struct net_device *el16_probe(int unit); -extern struct net_device *elmc_probe(int unit); extern struct net_device *elplus_probe(int unit); -extern struct net_device *ac3200_probe(int unit); -extern struct net_device *es_probe(int unit); -extern struct net_device *lne390_probe(int unit); extern struct net_device *e2100_probe(int unit); extern struct net_device *ni5010_probe(int unit); extern struct net_device *ni52_probe(int unit); @@ -77,7 +71,6 @@ extern struct net_device *tc515_probe(int unit); extern struct net_device *lance_probe(int unit); extern struct net_device *mac8390_probe(int unit); extern struct net_device *mac89x0_probe(int unit); -extern struct net_device *mc32_probe(int unit); extern struct net_device *cops_probe(int unit); extern struct net_device *ltpc_probe(void); @@ -111,29 +104,6 @@ static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe) } /* - * This is a bit of an artificial separation as there are PCI drivers - * that also probe for EISA cards (in the PCI group) and there are ISA - * drivers that probe for EISA cards (in the ISA group). These are the - * legacy EISA only driver probes, and also the legacy PCI probes - */ - -static struct devprobe2 eisa_probes[] __initdata = { -#ifdef CONFIG_ULTRA32 - {ultra32_probe, 0}, -#endif -#ifdef CONFIG_AC3200 - {ac3200_probe, 0}, -#endif -#ifdef CONFIG_ES3210 - {es_probe, 0}, -#endif -#ifdef CONFIG_LNE390 - {lne390_probe, 0}, -#endif - {NULL, 0}, -}; - -/* * ISA probes that touch addresses < 0x400 (including those that also * look for EISA/PCI cards in addition to ISA cards). */ @@ -264,7 +234,6 @@ static void __init ethif_probe2(int unit) return; (void)( probe_list2(unit, m68k_probes, base_addr == 0) && - probe_list2(unit, eisa_probes, base_addr == 0) && probe_list2(unit, isa_probes, base_addr == 0) && probe_list2(unit, parport_probes, base_addr == 0)); } -- cgit v0.10.2 From 605928337866c6369ae60509fa2b10af325a25eb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 14 Jan 2013 09:28:27 +0000 Subject: ipv6 netevent: Remove old_neigh from netevent_redirect. The only user is cxgb3 driver. old_neigh is used to check device change, but it must not happen on redirect. In this sense, we can remove old_neigh argument. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c index 91d02eb..4232767 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c @@ -64,9 +64,8 @@ static const unsigned int MAX_ATIDS = 64 * 1024; static const unsigned int ATID_BASE = 0x10000; static void cxgb_neigh_update(struct neighbour *neigh); -static void cxgb_redirect(struct dst_entry *old, struct neighbour *old_neigh, - struct dst_entry *new, struct neighbour *new_neigh, - const void *daddr); +static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new, + struct neighbour *neigh, const void *daddr); static inline int offload_activated(struct t3cdev *tdev) { @@ -970,10 +969,9 @@ static int nb_callback(struct notifier_block *self, unsigned long event, } case (NETEVENT_REDIRECT):{ struct netevent_redirect *nr = ctx; - cxgb_redirect(nr->old, nr->old_neigh, - nr->new, nr->new_neigh, + cxgb_redirect(nr->old, nr->new, nr->neigh, nr->daddr); - cxgb_neigh_update(nr->new_neigh); + cxgb_neigh_update(nr->neigh); break; } default: @@ -1109,11 +1107,11 @@ static void set_l2t_ix(struct t3cdev *tdev, u32 tid, struct l2t_entry *e) tdev->send(tdev, skb); } -static void cxgb_redirect(struct dst_entry *old, struct neighbour *old_neigh, - struct dst_entry *new, struct neighbour *new_neigh, +static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new, + struct neighbour *neigh, const void *daddr) { - struct net_device *olddev, *newdev; + struct net_device *dev; struct tid_info *ti; struct t3cdev *tdev; u32 tid; @@ -1121,26 +1119,15 @@ static void cxgb_redirect(struct dst_entry *old, struct neighbour *old_neigh, struct l2t_entry *e; struct t3c_tid_entry *te; - olddev = old_neigh->dev; - newdev = new_neigh->dev; + dev = neigh->dev; - if (!is_offloading(olddev)) - return; - if (!is_offloading(newdev)) { - pr_warn("%s: Redirect to non-offload device ignored\n", - __func__); + if (!is_offloading(dev)) return; - } - tdev = dev2t3cdev(olddev); + tdev = dev2t3cdev(dev); BUG_ON(!tdev); - if (tdev != dev2t3cdev(newdev)) { - pr_warn("%s: Redirect to different offload device ignored\n", - __func__); - return; - } /* Add new L2T entry */ - e = t3_l2t_get(tdev, new, newdev, daddr); + e = t3_l2t_get(tdev, new, dev, daddr); if (!e) { pr_err("%s: couldn't allocate new l2t entry!\n", __func__); return; diff --git a/include/net/netevent.h b/include/net/netevent.h index 3ce4988..fe630dd 100644 --- a/include/net/netevent.h +++ b/include/net/netevent.h @@ -16,9 +16,8 @@ struct neighbour; struct netevent_redirect { struct dst_entry *old; - struct neighbour *old_neigh; struct dst_entry *new; - struct neighbour *new_neigh; + struct neighbour *neigh; const void *daddr; }; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 34f392f0..7c34c01 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1803,10 +1803,9 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu goto out; netevent.old = &rt->dst; - netevent.old_neigh = old_neigh; netevent.new = &nrt->dst; - netevent.new_neigh = neigh; netevent.daddr = &msg->dest; + netevent.neigh = neigh; call_netevent_notifiers(NETEVENT_REDIRECT, &netevent); if (rt->rt6i_flags & RTF_CACHE) { -- cgit v0.10.2 From c1b52739e45f5969b208ebc377f52468280af11e Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Mon, 14 Jan 2013 05:15:39 +0000 Subject: pkt_sched: namespace aware act_mirred Eric Dumazet pointed out that act_mirred needs to find the current net_ns, and struct net pointer is not provided in the call chain. His original patch made use of current->nsproxy->net_ns to find the network namespace, but this fails to work correctly for userspace code that makes use of netlink sockets in different network namespaces. Instead, pass the "struct net *" down along the call chain to where it is needed. This version removes the ifb changes as Eric has submitted that patch separately, but is otherwise identical to the previous version. Signed-off-by: Benjamin LaHaise Tested-by: Eric Dumazet Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/include/net/act_api.h b/include/net/act_api.h index c739531..112c25c 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -91,7 +91,9 @@ struct tc_action_ops { int (*dump)(struct sk_buff *, struct tc_action *, int, int); int (*cleanup)(struct tc_action *, int bind); int (*lookup)(struct tc_action *, u32); - int (*init)(struct nlattr *, struct nlattr *, struct tc_action *, int , int); + int (*init)(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *act, int ovr, + int bind); int (*walk)(struct sk_buff *, struct netlink_callback *, int, struct tc_action *); }; @@ -116,8 +118,12 @@ extern int tcf_register_action(struct tc_action_ops *a); extern int tcf_unregister_action(struct tc_action_ops *a); extern void tcf_action_destroy(struct tc_action *a, int bind); extern int tcf_action_exec(struct sk_buff *skb, const struct tc_action *a, struct tcf_result *res); -extern struct tc_action *tcf_action_init(struct nlattr *nla, struct nlattr *est, char *n, int ovr, int bind); -extern struct tc_action *tcf_action_init_1(struct nlattr *nla, struct nlattr *est, char *n, int ovr, int bind); +extern struct tc_action *tcf_action_init(struct net *net, struct nlattr *nla, + struct nlattr *est, char *n, int ovr, + int bind); +extern struct tc_action *tcf_action_init_1(struct net *net, struct nlattr *nla, + struct nlattr *est, char *n, int ovr, + int bind); extern int tcf_action_dump(struct sk_buff *skb, struct tc_action *a, int, int); extern int tcf_action_dump_old(struct sk_buff *skb, struct tc_action *a, int, int); extern int tcf_action_dump_1(struct sk_buff *skb, struct tc_action *a, int, int); diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h index 9fcc680..1317450 100644 --- a/include/net/pkt_cls.h +++ b/include/net/pkt_cls.h @@ -126,9 +126,10 @@ tcf_exts_exec(struct sk_buff *skb, struct tcf_exts *exts, return 0; } -extern int tcf_exts_validate(struct tcf_proto *tp, struct nlattr **tb, - struct nlattr *rate_tlv, struct tcf_exts *exts, - const struct tcf_ext_map *map); +extern int tcf_exts_validate(struct net *net, struct tcf_proto *tp, + struct nlattr **tb, struct nlattr *rate_tlv, + struct tcf_exts *exts, + const struct tcf_ext_map *map); extern void tcf_exts_destroy(struct tcf_proto *tp, struct tcf_exts *exts); extern void tcf_exts_change(struct tcf_proto *tp, struct tcf_exts *dst, struct tcf_exts *src); diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index 1540f9c..2d06c2a 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -195,7 +195,7 @@ struct tcf_proto_ops { unsigned long (*get)(struct tcf_proto*, u32 handle); void (*put)(struct tcf_proto*, unsigned long); - int (*change)(struct sk_buff *, + int (*change)(struct net *net, struct sk_buff *, struct tcf_proto*, unsigned long, u32 handle, struct nlattr **, unsigned long *); diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 65d240c..8579c4b 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -485,8 +485,9 @@ errout: return err; } -struct tc_action *tcf_action_init_1(struct nlattr *nla, struct nlattr *est, - char *name, int ovr, int bind) +struct tc_action *tcf_action_init_1(struct net *net, struct nlattr *nla, + struct nlattr *est, char *name, int ovr, + int bind) { struct tc_action *a; struct tc_action_ops *a_o; @@ -542,9 +543,9 @@ struct tc_action *tcf_action_init_1(struct nlattr *nla, struct nlattr *est, /* backward compatibility for policer */ if (name == NULL) - err = a_o->init(tb[TCA_ACT_OPTIONS], est, a, ovr, bind); + err = a_o->init(net, tb[TCA_ACT_OPTIONS], est, a, ovr, bind); else - err = a_o->init(nla, est, a, ovr, bind); + err = a_o->init(net, nla, est, a, ovr, bind); if (err < 0) goto err_free; @@ -566,8 +567,9 @@ err_out: return ERR_PTR(err); } -struct tc_action *tcf_action_init(struct nlattr *nla, struct nlattr *est, - char *name, int ovr, int bind) +struct tc_action *tcf_action_init(struct net *net, struct nlattr *nla, + struct nlattr *est, char *name, int ovr, + int bind) { struct nlattr *tb[TCA_ACT_MAX_PRIO + 1]; struct tc_action *head = NULL, *act, *act_prev = NULL; @@ -579,7 +581,7 @@ struct tc_action *tcf_action_init(struct nlattr *nla, struct nlattr *est, return ERR_PTR(err); for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) { - act = tcf_action_init_1(tb[i], est, name, ovr, bind); + act = tcf_action_init_1(net, tb[i], est, name, ovr, bind); if (IS_ERR(act)) goto err; act->order = i; @@ -960,7 +962,7 @@ tcf_action_add(struct net *net, struct nlattr *nla, struct nlmsghdr *n, struct tc_action *a; u32 seq = n->nlmsg_seq; - act = tcf_action_init(nla, NULL, NULL, ovr, 0); + act = tcf_action_init(net, nla, NULL, NULL, ovr, 0); if (act == NULL) goto done; if (IS_ERR(act)) { diff --git a/net/sched/act_csum.c b/net/sched/act_csum.c index 2c8ad7c..08fa1e8 100644 --- a/net/sched/act_csum.c +++ b/net/sched/act_csum.c @@ -51,7 +51,7 @@ static const struct nla_policy csum_policy[TCA_CSUM_MAX + 1] = { [TCA_CSUM_PARMS] = { .len = sizeof(struct tc_csum), }, }; -static int tcf_csum_init(struct nlattr *nla, struct nlattr *est, +static int tcf_csum_init(struct net *n, struct nlattr *nla, struct nlattr *est, struct tc_action *a, int ovr, int bind) { struct nlattr *tb[TCA_CSUM_MAX + 1]; diff --git a/net/sched/act_gact.c b/net/sched/act_gact.c index 05d60859..fd2b3cf 100644 --- a/net/sched/act_gact.c +++ b/net/sched/act_gact.c @@ -58,8 +58,9 @@ static const struct nla_policy gact_policy[TCA_GACT_MAX + 1] = { [TCA_GACT_PROB] = { .len = sizeof(struct tc_gact_p) }, }; -static int tcf_gact_init(struct nlattr *nla, struct nlattr *est, - struct tc_action *a, int ovr, int bind) +static int tcf_gact_init(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *a, + int ovr, int bind) { struct nlattr *tb[TCA_GACT_MAX + 1]; struct tc_gact *parm; diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c index 58fb3c7..0fb9e3f 100644 --- a/net/sched/act_ipt.c +++ b/net/sched/act_ipt.c @@ -102,7 +102,7 @@ static const struct nla_policy ipt_policy[TCA_IPT_MAX + 1] = { [TCA_IPT_TARG] = { .len = sizeof(struct xt_entry_target) }, }; -static int tcf_ipt_init(struct nlattr *nla, struct nlattr *est, +static int tcf_ipt_init(struct net *net, struct nlattr *nla, struct nlattr *est, struct tc_action *a, int ovr, int bind) { struct nlattr *tb[TCA_IPT_MAX + 1]; diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 9c0fd0c..5d676ed 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -62,8 +62,9 @@ static const struct nla_policy mirred_policy[TCA_MIRRED_MAX + 1] = { [TCA_MIRRED_PARMS] = { .len = sizeof(struct tc_mirred) }, }; -static int tcf_mirred_init(struct nlattr *nla, struct nlattr *est, - struct tc_action *a, int ovr, int bind) +static int tcf_mirred_init(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *a, int ovr, + int bind) { struct nlattr *tb[TCA_MIRRED_MAX + 1]; struct tc_mirred *parm; @@ -88,7 +89,7 @@ static int tcf_mirred_init(struct nlattr *nla, struct nlattr *est, return -EINVAL; } if (parm->ifindex) { - dev = __dev_get_by_index(&init_net, parm->ifindex); + dev = __dev_get_by_index(net, parm->ifindex); if (dev == NULL) return -ENODEV; switch (dev->type) { diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c index b5d029e..876f0ef 100644 --- a/net/sched/act_nat.c +++ b/net/sched/act_nat.c @@ -44,7 +44,7 @@ static const struct nla_policy nat_policy[TCA_NAT_MAX + 1] = { [TCA_NAT_PARMS] = { .len = sizeof(struct tc_nat) }, }; -static int tcf_nat_init(struct nlattr *nla, struct nlattr *est, +static int tcf_nat_init(struct net *net, struct nlattr *nla, struct nlattr *est, struct tc_action *a, int ovr, int bind) { struct nlattr *tb[TCA_NAT_MAX + 1]; diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index 45c53ab..0c3fadd 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -38,8 +38,9 @@ static const struct nla_policy pedit_policy[TCA_PEDIT_MAX + 1] = { [TCA_PEDIT_PARMS] = { .len = sizeof(struct tc_pedit) }, }; -static int tcf_pedit_init(struct nlattr *nla, struct nlattr *est, - struct tc_action *a, int ovr, int bind) +static int tcf_pedit_init(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *a, + int ovr, int bind) { struct nlattr *tb[TCA_PEDIT_MAX + 1]; struct tc_pedit *parm; diff --git a/net/sched/act_police.c b/net/sched/act_police.c index a9de232..8dbd695 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -130,8 +130,9 @@ static const struct nla_policy police_policy[TCA_POLICE_MAX + 1] = { [TCA_POLICE_RESULT] = { .type = NLA_U32 }, }; -static int tcf_act_police_locate(struct nlattr *nla, struct nlattr *est, - struct tc_action *a, int ovr, int bind) +static int tcf_act_police_locate(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *a, + int ovr, int bind) { unsigned int h; int ret = 0, err; diff --git a/net/sched/act_simple.c b/net/sched/act_simple.c index 3714f60..7725eb4 100644 --- a/net/sched/act_simple.c +++ b/net/sched/act_simple.c @@ -95,8 +95,9 @@ static const struct nla_policy simple_policy[TCA_DEF_MAX + 1] = { [TCA_DEF_DATA] = { .type = NLA_STRING, .len = SIMP_MAX_DATA }, }; -static int tcf_simp_init(struct nlattr *nla, struct nlattr *est, - struct tc_action *a, int ovr, int bind) +static int tcf_simp_init(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *a, + int ovr, int bind) { struct nlattr *tb[TCA_DEF_MAX + 1]; struct tc_defact *parm; diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c index 476e0fa..cb42211 100644 --- a/net/sched/act_skbedit.c +++ b/net/sched/act_skbedit.c @@ -67,8 +67,9 @@ static const struct nla_policy skbedit_policy[TCA_SKBEDIT_MAX + 1] = { [TCA_SKBEDIT_MARK] = { .len = sizeof(u32) }, }; -static int tcf_skbedit_init(struct nlattr *nla, struct nlattr *est, - struct tc_action *a, int ovr, int bind) +static int tcf_skbedit_init(struct net *net, struct nlattr *nla, + struct nlattr *est, struct tc_action *a, + int ovr, int bind) { struct nlattr *tb[TCA_SKBEDIT_MAX + 1]; struct tc_skbedit *parm; diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index ff55ed6..964f5e4 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -321,7 +321,7 @@ replay: } } - err = tp->ops->change(skb, tp, cl, t->tcm_handle, tca, &fh); + err = tp->ops->change(net, skb, tp, cl, t->tcm_handle, tca, &fh); if (err == 0) { if (tp_created) { spin_lock_bh(root_lock); @@ -508,7 +508,7 @@ void tcf_exts_destroy(struct tcf_proto *tp, struct tcf_exts *exts) } EXPORT_SYMBOL(tcf_exts_destroy); -int tcf_exts_validate(struct tcf_proto *tp, struct nlattr **tb, +int tcf_exts_validate(struct net *net, struct tcf_proto *tp, struct nlattr **tb, struct nlattr *rate_tlv, struct tcf_exts *exts, const struct tcf_ext_map *map) { @@ -519,7 +519,7 @@ int tcf_exts_validate(struct tcf_proto *tp, struct nlattr **tb, struct tc_action *act; if (map->police && tb[map->police]) { - act = tcf_action_init_1(tb[map->police], rate_tlv, + act = tcf_action_init_1(net, tb[map->police], rate_tlv, "police", TCA_ACT_NOREPLACE, TCA_ACT_BIND); if (IS_ERR(act)) @@ -528,8 +528,9 @@ int tcf_exts_validate(struct tcf_proto *tp, struct nlattr **tb, act->type = TCA_OLD_COMPAT; exts->action = act; } else if (map->action && tb[map->action]) { - act = tcf_action_init(tb[map->action], rate_tlv, NULL, - TCA_ACT_NOREPLACE, TCA_ACT_BIND); + act = tcf_action_init(net, tb[map->action], rate_tlv, + NULL, TCA_ACT_NOREPLACE, + TCA_ACT_BIND); if (IS_ERR(act)) return PTR_ERR(act); diff --git a/net/sched/cls_basic.c b/net/sched/cls_basic.c index 344a11b..d76a35d 100644 --- a/net/sched/cls_basic.c +++ b/net/sched/cls_basic.c @@ -132,15 +132,16 @@ static const struct nla_policy basic_policy[TCA_BASIC_MAX + 1] = { [TCA_BASIC_EMATCHES] = { .type = NLA_NESTED }, }; -static int basic_set_parms(struct tcf_proto *tp, struct basic_filter *f, - unsigned long base, struct nlattr **tb, +static int basic_set_parms(struct net *net, struct tcf_proto *tp, + struct basic_filter *f, unsigned long base, + struct nlattr **tb, struct nlattr *est) { int err = -EINVAL; struct tcf_exts e; struct tcf_ematch_tree t; - err = tcf_exts_validate(tp, tb, est, &e, &basic_ext_map); + err = tcf_exts_validate(net, tp, tb, est, &e, &basic_ext_map); if (err < 0) return err; @@ -162,7 +163,7 @@ errout: return err; } -static int basic_change(struct sk_buff *in_skb, +static int basic_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, unsigned long *arg) { @@ -182,7 +183,7 @@ static int basic_change(struct sk_buff *in_skb, if (f != NULL) { if (handle && f->handle != handle) return -EINVAL; - return basic_set_parms(tp, f, base, tb, tca[TCA_RATE]); + return basic_set_parms(net, tp, f, base, tb, tca[TCA_RATE]); } err = -ENOBUFS; @@ -208,7 +209,7 @@ static int basic_change(struct sk_buff *in_skb, f->handle = head->hgenerator; } - err = basic_set_parms(tp, f, base, tb, tca[TCA_RATE]); + err = basic_set_parms(net, tp, f, base, tb, tca[TCA_RATE]); if (err < 0) goto errout; diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c index 6db7855..3a294eb 100644 --- a/net/sched/cls_cgroup.c +++ b/net/sched/cls_cgroup.c @@ -178,7 +178,7 @@ static const struct nla_policy cgroup_policy[TCA_CGROUP_MAX + 1] = { [TCA_CGROUP_EMATCHES] = { .type = NLA_NESTED }, }; -static int cls_cgroup_change(struct sk_buff *in_skb, +static int cls_cgroup_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, unsigned long *arg) @@ -215,7 +215,8 @@ static int cls_cgroup_change(struct sk_buff *in_skb, if (err < 0) return err; - err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &cgroup_ext_map); + err = tcf_exts_validate(net, tp, tb, tca[TCA_RATE], &e, + &cgroup_ext_map); if (err < 0) return err; diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c index ce82d0c..aa36a8c 100644 --- a/net/sched/cls_flow.c +++ b/net/sched/cls_flow.c @@ -351,7 +351,7 @@ static const struct nla_policy flow_policy[TCA_FLOW_MAX + 1] = { [TCA_FLOW_PERTURB] = { .type = NLA_U32 }, }; -static int flow_change(struct sk_buff *in_skb, +static int flow_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, unsigned long *arg) @@ -397,7 +397,7 @@ static int flow_change(struct sk_buff *in_skb, return -EOPNOTSUPP; } - err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &flow_ext_map); + err = tcf_exts_validate(net, tp, tb, tca[TCA_RATE], &e, &flow_ext_map); if (err < 0) return err; diff --git a/net/sched/cls_fw.c b/net/sched/cls_fw.c index 4075a0a..1135d82 100644 --- a/net/sched/cls_fw.c +++ b/net/sched/cls_fw.c @@ -192,7 +192,7 @@ static const struct nla_policy fw_policy[TCA_FW_MAX + 1] = { }; static int -fw_change_attrs(struct tcf_proto *tp, struct fw_filter *f, +fw_change_attrs(struct net *net, struct tcf_proto *tp, struct fw_filter *f, struct nlattr **tb, struct nlattr **tca, unsigned long base) { struct fw_head *head = (struct fw_head *)tp->root; @@ -200,7 +200,7 @@ fw_change_attrs(struct tcf_proto *tp, struct fw_filter *f, u32 mask; int err; - err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &fw_ext_map); + err = tcf_exts_validate(net, tp, tb, tca[TCA_RATE], &e, &fw_ext_map); if (err < 0) return err; @@ -233,7 +233,7 @@ errout: return err; } -static int fw_change(struct sk_buff *in_skb, +static int fw_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, @@ -255,7 +255,7 @@ static int fw_change(struct sk_buff *in_skb, if (f != NULL) { if (f->id != handle && handle) return -EINVAL; - return fw_change_attrs(tp, f, tb, tca, base); + return fw_change_attrs(net, tp, f, tb, tca, base); } if (!handle) @@ -282,7 +282,7 @@ static int fw_change(struct sk_buff *in_skb, f->id = handle; - err = fw_change_attrs(tp, f, tb, tca, base); + err = fw_change_attrs(net, tp, f, tb, tca, base); if (err < 0) goto errout; diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c index c10d57b..37da567 100644 --- a/net/sched/cls_route.c +++ b/net/sched/cls_route.c @@ -335,9 +335,10 @@ static const struct nla_policy route4_policy[TCA_ROUTE4_MAX + 1] = { [TCA_ROUTE4_IIF] = { .type = NLA_U32 }, }; -static int route4_set_parms(struct tcf_proto *tp, unsigned long base, - struct route4_filter *f, u32 handle, struct route4_head *head, - struct nlattr **tb, struct nlattr *est, int new) +static int route4_set_parms(struct net *net, struct tcf_proto *tp, + unsigned long base, struct route4_filter *f, + u32 handle, struct route4_head *head, + struct nlattr **tb, struct nlattr *est, int new) { int err; u32 id = 0, to = 0, nhandle = 0x8000; @@ -346,7 +347,7 @@ static int route4_set_parms(struct tcf_proto *tp, unsigned long base, struct route4_bucket *b; struct tcf_exts e; - err = tcf_exts_validate(tp, tb, est, &e, &route_ext_map); + err = tcf_exts_validate(net, tp, tb, est, &e, &route_ext_map); if (err < 0) return err; @@ -427,7 +428,7 @@ errout: return err; } -static int route4_change(struct sk_buff *in_skb, +static int route4_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, @@ -457,7 +458,7 @@ static int route4_change(struct sk_buff *in_skb, if (f->bkt) old_handle = f->handle; - err = route4_set_parms(tp, base, f, handle, head, tb, + err = route4_set_parms(net, tp, base, f, handle, head, tb, tca[TCA_RATE], 0); if (err < 0) return err; @@ -480,7 +481,7 @@ static int route4_change(struct sk_buff *in_skb, if (f == NULL) goto errout; - err = route4_set_parms(tp, base, f, handle, head, tb, + err = route4_set_parms(net, tp, base, f, handle, head, tb, tca[TCA_RATE], 1); if (err < 0) goto errout; diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h index 494bbb9..252d8b0 100644 --- a/net/sched/cls_rsvp.h +++ b/net/sched/cls_rsvp.h @@ -416,7 +416,7 @@ static const struct nla_policy rsvp_policy[TCA_RSVP_MAX + 1] = { [TCA_RSVP_PINFO] = { .len = sizeof(struct tc_rsvp_pinfo) }, }; -static int rsvp_change(struct sk_buff *in_skb, +static int rsvp_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, @@ -440,7 +440,7 @@ static int rsvp_change(struct sk_buff *in_skb, if (err < 0) return err; - err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map); + err = tcf_exts_validate(net, tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map); if (err < 0) return err; diff --git a/net/sched/cls_tcindex.c b/net/sched/cls_tcindex.c index a1293b4..b86535a 100644 --- a/net/sched/cls_tcindex.c +++ b/net/sched/cls_tcindex.c @@ -197,9 +197,10 @@ static const struct nla_policy tcindex_policy[TCA_TCINDEX_MAX + 1] = { }; static int -tcindex_set_parms(struct tcf_proto *tp, unsigned long base, u32 handle, - struct tcindex_data *p, struct tcindex_filter_result *r, - struct nlattr **tb, struct nlattr *est) +tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base, + u32 handle, struct tcindex_data *p, + struct tcindex_filter_result *r, struct nlattr **tb, + struct nlattr *est) { int err, balloc = 0; struct tcindex_filter_result new_filter_result, *old_r = r; @@ -208,7 +209,7 @@ tcindex_set_parms(struct tcf_proto *tp, unsigned long base, u32 handle, struct tcindex_filter *f = NULL; /* make gcc behave */ struct tcf_exts e; - err = tcf_exts_validate(tp, tb, est, &e, &tcindex_ext_map); + err = tcf_exts_validate(net, tp, tb, est, &e, &tcindex_ext_map); if (err < 0) return err; @@ -332,7 +333,7 @@ errout: } static int -tcindex_change(struct sk_buff *in_skb, +tcindex_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, unsigned long *arg) { @@ -353,7 +354,8 @@ tcindex_change(struct sk_buff *in_skb, if (err < 0) return err; - return tcindex_set_parms(tp, base, handle, p, r, tb, tca[TCA_RATE]); + return tcindex_set_parms(net, tp, base, handle, p, r, tb, + tca[TCA_RATE]); } diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c index c7c27bc..eb07a1e 100644 --- a/net/sched/cls_u32.c +++ b/net/sched/cls_u32.c @@ -488,15 +488,15 @@ static const struct nla_policy u32_policy[TCA_U32_MAX + 1] = { [TCA_U32_MARK] = { .len = sizeof(struct tc_u32_mark) }, }; -static int u32_set_parms(struct tcf_proto *tp, unsigned long base, - struct tc_u_hnode *ht, +static int u32_set_parms(struct net *net, struct tcf_proto *tp, + unsigned long base, struct tc_u_hnode *ht, struct tc_u_knode *n, struct nlattr **tb, struct nlattr *est) { int err; struct tcf_exts e; - err = tcf_exts_validate(tp, tb, est, &e, &u32_ext_map); + err = tcf_exts_validate(net, tp, tb, est, &e, &u32_ext_map); if (err < 0) return err; @@ -544,7 +544,7 @@ errout: return err; } -static int u32_change(struct sk_buff *in_skb, +static int u32_change(struct net *net, struct sk_buff *in_skb, struct tcf_proto *tp, unsigned long base, u32 handle, struct nlattr **tca, unsigned long *arg) @@ -570,7 +570,8 @@ static int u32_change(struct sk_buff *in_skb, if (TC_U32_KEY(n->handle) == 0) return -EINVAL; - return u32_set_parms(tp, base, n->ht_up, n, tb, tca[TCA_RATE]); + return u32_set_parms(net, tp, base, n->ht_up, n, tb, + tca[TCA_RATE]); } if (tb[TCA_U32_DIVISOR]) { @@ -656,7 +657,7 @@ static int u32_change(struct sk_buff *in_skb, } #endif - err = u32_set_parms(tp, base, ht, n, tb, tca[TCA_RATE]); + err = u32_set_parms(net, tp, base, ht, n, tb, tca[TCA_RATE]); if (err == 0) { struct tc_u_knode **ins; for (ins = &ht->ht[TC_U32_HASH(handle)]; *ins; ins = &(*ins)->next) -- cgit v0.10.2 From e2d4a24e03f9f7b255e86a2537dca0927f08af4a Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Sat, 12 Jan 2013 10:28:12 +0800 Subject: ath9k_hw: ar9002_hw_spectral_scan_config() can be static Signed-off-by: Fengguang Wu Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 2cb665e..f400351 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -555,7 +555,7 @@ static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); } -void ar9002_hw_spectral_scan_config(struct ath_hw *ah, +static void ar9002_hw_spectral_scan_config(struct ath_hw *ah, struct ath_spec_scan *param) { u8 count; -- cgit v0.10.2 From 6bf2e5461479c4511f59946a7378db576b04dbc5 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Fri, 11 Jan 2013 22:07:22 -0800 Subject: bcma: fix bcm4716/bcm4748 i2s irqflag The default irqflag assignment for the I2S core on some Broadcom 4716/4748 devices is invalid and needs to be corrected (from the Broadcom SDK). Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index a808404..9fe86ee 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -256,6 +256,32 @@ void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) mcore->early_setup_done = true; } +static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) +{ + struct bcma_device *cpu, *pcie, *i2s; + + /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) + * (IRQ flags > 7 are ignored when setting the interrupt masks) + */ + if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && + bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) + return; + + cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + pcie = bcma_find_core(bus, BCMA_CORE_PCIE); + i2s = bcma_find_core(bus, BCMA_CORE_I2S); + if (cpu && pcie && i2s && + bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && + bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && + bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { + bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); + bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); + bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); + bcma_debug(bus, + "Moved i2s interrupt to oob line 7 instead of 8\n"); + } +} + void bcma_core_mips_init(struct bcma_drv_mips *mcore) { struct bcma_bus *bus; @@ -269,6 +295,8 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) bcma_core_mips_early_init(mcore); + bcma_fix_i2s_irqflag(bus); + switch (bus->chipinfo.id) { case BCMA_CHIP_ID_BCM4716: case BCMA_CHIP_ID_BCM4748: diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 73c7f4b..0d1ea29 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -28,6 +28,7 @@ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 +#define BCMA_MIPS_OOBSELINA74 0x004 #define BCMA_MIPS_OOBSELOUTA30 0x100 struct bcma_device; -- cgit v0.10.2 From f6734627edea983b307593f71824d7ec2dd2625a Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:13 -0800 Subject: bcma: delete duplicate readl The 'val' has already been read by the prior call to 'mips_busprobe32'; this 'readl' is unnecessary. Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 37d1777d..cf3dca9 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -122,8 +122,6 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, val = 0xffffffff; goto unmap; } - - val = readl(mmio); } val >>= (8 * (off & 3)); -- cgit v0.10.2 From a35ab937cb27ec8c00b6f13cade93dc10e22b670 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:14 -0800 Subject: bcma: jump to 'out' label for invalid 'func' value Consistently jump to the 'out' label for error conditions (adds missing check for 'func' validity in bcma_extpci_write_config). Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index cf3dca9..4a41523 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -94,7 +94,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, if (dev == 0) { /* we support only two functions on device 0 */ if (func > 1) - return -EINVAL; + goto out; /* accesses to config registers with offsets >= 256 * requires indirect access. @@ -157,6 +157,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, if (unlikely(len != 1 && len != 2 && len != 4)) goto out; if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) + goto out; + /* accesses to config registers with offsets >= 256 * requires indirect access. */ -- cgit v0.10.2 From 447d7e25be462329268f279bef2f6faa986a5185 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:15 -0800 Subject: bcma: don't map/unmap a subset of the PCI config space For PCI config space access offsets < 256 for device '0', bcma_extpci_write_config performs an 'ioremap_nocache' on a 4 byte section of the PCI config space (an area that has already previously been mapped), and then subsequently unmaps that 4 byte section. This can't be a good thing for future read access from that now unmapped location. Modify the config space writes to use the existing access functions (similar to how it is done for the reads). Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 4a41523..c0cb062 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -149,7 +149,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, const void *buf, int len) { int err = -EINVAL; - u32 addr = 0, val = 0; + u32 addr, val; void __iomem *mmio = 0; u16 chipid = pc->core->bus->chipinfo.id; @@ -165,12 +165,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, * requires indirect access. */ if (off < PCI_CONFIG_SPACE_SIZE) { - addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xfc); - mmio = ioremap_nocache(addr, sizeof(val)); - if (!mmio) - goto out; + val = pcicore_read32(pc, addr); } } else { addr = bcma_get_cfgspace_addr(pc, dev, func, off); @@ -189,12 +187,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, switch (len) { case 1: - val = readl(mmio); val &= ~(0xFF << (8 * (off & 3))); val |= *((const u8 *)buf) << (8 * (off & 3)); break; case 2: - val = readl(mmio); val &= ~(0xFFFF << (8 * (off & 3))); val |= *((const u16 *)buf) << (8 * (off & 3)); break; @@ -202,13 +198,17 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, val = *((const u32 *)buf); break; } - if (dev == 0 && !addr) { + if (dev == 0) { /* accesses to config registers with offsets >= 256 * requires indirect access. */ - addr = (func << 12); - addr |= (off & 0x0FFF); - bcma_pcie_write_config(pc, addr, val); + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFF); + bcma_pcie_write_config(pc, addr, val); + } else { + pcicore_write32(pc, addr, val); + } } else { writel(val, mmio); -- cgit v0.10.2 From b09e9abd091a4ed1e638a810b25c6577b4621b12 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:16 -0800 Subject: bcma: add support for 1 and 2 byte extended config space access The sanity checks allow 1 and 2 byte reads/writes of the extended PCI config space to proceed; however, the code only supports 4 byte reads/writes. This patch adds support for 1 and 2 byte reads/writes of the extended PCI config space. Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index c0cb062..f92124c 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -101,7 +101,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, */ if (off >= PCI_CONFIG_SPACE_SIZE) { addr = (func << 12); - addr |= (off & 0x0FFF); + addr |= (off & 0x0FFC); val = bcma_pcie_read_config(pc, addr); } else { addr = BCMA_CORE_PCI_PCICFG0; @@ -164,7 +164,11 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, /* accesses to config registers with offsets >= 256 * requires indirect access. */ - if (off < PCI_CONFIG_SPACE_SIZE) { + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFC); + val = bcma_pcie_read_config(pc, addr); + } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xfc); @@ -202,13 +206,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, /* accesses to config registers with offsets >= 256 * requires indirect access. */ - if (off >= PCI_CONFIG_SPACE_SIZE) { - addr = (func << 12); - addr |= (off & 0x0FFF); + if (off >= PCI_CONFIG_SPACE_SIZE) bcma_pcie_write_config(pc, addr, val); - } else { + else pcicore_write32(pc, addr, val); - } } else { writel(val, mmio); -- cgit v0.10.2 From 660b9caaad380758c756a7e60397e33dab44fe3f Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:17 -0800 Subject: bcma: use consistent case for 'hex' constants Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index f92124c..221f8bb 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -106,7 +106,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); - addr |= (off & 0xfc); + addr |= (off & 0xFC); val = pcicore_read32(pc, addr); } } else { @@ -119,7 +119,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, goto out; if (mips_busprobe32(val, mmio)) { - val = 0xffffffff; + val = 0xFFFFFFFF; goto unmap; } } @@ -171,7 +171,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); - addr |= (off & 0xfc); + addr |= (off & 0xFC); val = pcicore_read32(pc, addr); } } else { @@ -184,7 +184,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, goto out; if (mips_busprobe32(val, mmio)) { - val = 0xffffffff; + val = 0xFFFFFFFF; goto unmap; } } @@ -280,7 +280,7 @@ static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, /* check for Header type 0 */ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, sizeof(u8)); - if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) + if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) return cap_ptr; /* check if the capability pointer field exists */ -- cgit v0.10.2 From f9a8f83b04e0c362a2fc660dbad980d24af209fc Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 14 Jan 2013 00:52:52 +0000 Subject: net: phy: remove flags argument from phy_{attach, connect, connect_direct} The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 95e5f59..d5b1a39 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -103,7 +103,7 @@ Letting the PHY Abstraction Layer do Everything Now, to connect, just call this function: - phydev = phy_connect(dev, phy_name, &adjust_link, flags, interface); + phydev = phy_connect(dev, phy_name, &adjust_link, interface); phydev is a pointer to the phy_device structure which represents the PHY. If phy_connect is successful, it will return the pointer. dev, here, is the @@ -113,7 +113,9 @@ Letting the PHY Abstraction Layer do Everything current state, though the PHY will not yet be truly operational at this point. - flags is a u32 which can optionally contain phy-specific flags. + PHY-specific flags should be set in phydev->dev_flags prior to the call + to phy_connect() such that the underlying PHY driver can check for flags + and perform specific operations based on them. This is useful if the system has put hardware restrictions on the PHY/controller, of which the PHY needs to be aware. @@ -185,11 +187,10 @@ Doing it all yourself start, or disables then frees them for stop. struct phy_device * phy_attach(struct net_device *dev, const char *phy_id, - u32 flags, phy_interface_t interface); + phy_interface_t interface); Attaches a network device to a particular PHY, binding the PHY to a generic - driver if none was found during bus initialization. Passes in - any phy-specific flags as needed. + driver if none was found during bus initialization. int phy_start_aneg(struct phy_device *phydev); diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 7eeddf0..cab306a 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -358,7 +358,7 @@ static int ax_mii_probe(struct net_device *dev) return -ENODEV; } - ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, 0, + ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, PHY_INTERFACE_MODE_MII); if (ret) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c index c7a83f6..a175d0b 100644 --- a/drivers/net/ethernet/adi/bfin_mac.c +++ b/drivers/net/ethernet/adi/bfin_mac.c @@ -425,8 +425,8 @@ static int mii_probe(struct net_device *dev, int phy_mode) return -EINVAL; } - phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link, - 0, phy_mode); + phydev = phy_connect(dev, dev_name(&phydev->dev), + &bfin_mac_adjust_link, phy_mode); if (IS_ERR(phydev)) { netdev_err(dev, "could not attach PHY\n"); diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c index 480662b..0be2195 100644 --- a/drivers/net/ethernet/aeroflex/greth.c +++ b/drivers/net/ethernet/aeroflex/greth.c @@ -1288,9 +1288,7 @@ static int greth_mdio_probe(struct net_device *dev) } ret = phy_connect_direct(dev, phy, &greth_link_change, - 0, greth->gbit_mac ? - PHY_INTERFACE_MODE_GMII : - PHY_INTERFACE_MODE_MII); + greth->gbit_mac ? PHY_INTERFACE_MODE_GMII : PHY_INTERFACE_MODE_MII); if (ret) { if (netif_msg_ifup(greth)) dev_err(&dev->dev, "could not attach to PHY\n"); diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index 65b865a..de774d4 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -437,8 +437,8 @@ static int au1000_mii_probe(struct net_device *dev) /* now we are supposed to have a proper phydev, to attach to... */ BUG_ON(phydev->attached_dev); - phydev = phy_connect(dev, dev_name(&phydev->dev), &au1000_adjust_link, - 0, PHY_INTERFACE_MODE_MII); + phydev = phy_connect(dev, dev_name(&phydev->dev), + &au1000_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index d8a1510..f5b6b47 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -799,7 +799,7 @@ static int bcm_enet_open(struct net_device *dev) snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->mii_bus->id, priv->phy_id); - phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0, + phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c index 3a1c8a3..e9b35da 100644 --- a/drivers/net/ethernet/broadcom/sb1250-mac.c +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c @@ -2385,7 +2385,7 @@ static int sbmac_mii_probe(struct net_device *dev) return -ENXIO; } - phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, 0, + phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, PHY_INTERFACE_MODE_GMII); if (IS_ERR(phy_dev)) { printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 88f2d41..2277491 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2004,8 +2004,8 @@ static int tg3_phy_init(struct tg3 *tp) phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; /* Attach the MAC to the PHY. */ - phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link, - phydev->dev_flags, phydev->interface); + phydev = phy_connect(tp->dev, dev_name(&phydev->dev), + tg3_adjust_link, phydev->interface); if (IS_ERR(phydev)) { dev_err(&tp->pdev->dev, "Could not attach to PHY\n"); return PTR_ERR(phydev); diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index a9b0830..352190b 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -287,7 +287,7 @@ static int macb_mii_probe(struct net_device *dev) } /* attach the mac to the phy */ - ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0, + ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, bp->phy_interface); if (ret) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/dnet.c b/drivers/net/ethernet/dnet.c index 2c177b3..f3d60eb 100644 --- a/drivers/net/ethernet/dnet.c +++ b/drivers/net/ethernet/dnet.c @@ -281,11 +281,11 @@ static int dnet_mii_probe(struct net_device *dev) /* attach the mac to the phy */ if (bp->capabilities & DNET_HAS_RMII) { phydev = phy_connect(dev, dev_name(&phydev->dev), - &dnet_handle_link_change, 0, + &dnet_handle_link_change, PHY_INTERFACE_MODE_RMII); } else { phydev = phy_connect(dev, dev_name(&phydev->dev), - &dnet_handle_link_change, 0, + &dnet_handle_link_change, PHY_INTERFACE_MODE_MII); } diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index b51c81a..aa47ef9 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -682,8 +682,8 @@ static int ethoc_mdio_probe(struct net_device *dev) return -ENXIO; } - err = phy_connect_direct(dev, phy, ethoc_mdio_poll, 0, - PHY_INTERFACE_MODE_GMII); + err = phy_connect_direct(dev, phy, ethoc_mdio_poll, + PHY_INTERFACE_MODE_GMII); if (err) { dev_err(&dev->dev, "could not attach to PHY\n"); return err; diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 96454b5..7c361d1 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -858,8 +858,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv) } phydev = phy_connect(netdev, dev_name(&phydev->dev), - &ftgmac100_adjust_link, 0, - PHY_INTERFACE_MODE_GMII); + &ftgmac100_adjust_link, PHY_INTERFACE_MODE_GMII); if (IS_ERR(phydev)) { netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 5f2b4ac..1b7684a 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1008,7 +1008,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) } snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id); - phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0, + phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, fep->phy_interface); if (IS_ERR(phy_dev)) { printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name); diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 8ead46a..6a21274 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -393,8 +393,8 @@ ltq_etop_mdio_probe(struct net_device *dev) return -ENODEV; } - phydev = phy_connect(dev, dev_name(&phydev->dev), <q_etop_mdio_link, - 0, priv->pldata->mii_mode); + phydev = phy_connect(dev, dev_name(&phydev->dev), + <q_etop_mdio_link, priv->pldata->mii_mode); if (IS_ERR(phydev)) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 84c1326..c27b23d8 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2789,7 +2789,7 @@ static void phy_init(struct mv643xx_eth_private *mp, int speed, int duplex) phy_reset(mp); - phy_attach(mp->dev, dev_name(&phy->dev), 0, PHY_INTERFACE_MODE_GMII); + phy_attach(mp->dev, dev_name(&phy->dev), PHY_INTERFACE_MODE_GMII); if (speed == 0) { phy->autoneg = AUTONEG_ENABLE; diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index c7f2fa6..037ed86 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1390,7 +1390,7 @@ static void phy_init(struct pxa168_eth_private *pep, int speed, int duplex) struct phy_device *phy = pep->phy; ethernet_phy_reset(pep); - phy_attach(pep->dev, dev_name(&phy->dev), 0, PHY_INTERFACE_MODE_MII); + phy_attach(pep->dev, dev_name(&phy->dev), PHY_INTERFACE_MODE_MII); if (speed == 0) { phy->autoneg = AUTONEG_ENABLE; diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 6fda51e..c4122c8 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -800,7 +800,7 @@ static int lpc_mii_probe(struct net_device *ndev) else netdev_info(ndev, "using RMII interface\n"); phydev = phy_connect(ndev, dev_name(&phydev->dev), - &lpc_handle_link_change, 0, + &lpc_handle_link_change, lpc_phy_interface_mode(&pldat->pdev->dev)); if (IS_ERR(phydev)) { diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index be3616d..34f76e9 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -1042,7 +1042,7 @@ static int r6040_mii_probe(struct net_device *dev) } phydev = phy_connect(dev, dev_name(&phydev->dev), &r6040_adjust_link, - 0, PHY_INTERFACE_MODE_MII); + PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { dev_err(&lp->pdev->dev, "could not attach to PHY\n"); diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 3d70586..e195c1e 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1422,7 +1422,7 @@ static int sh_eth_phy_init(struct net_device *ndev) /* Try connect to PHY */ phydev = phy_connect(ndev, phy_id, sh_eth_adjust_link, - 0, mdp->phy_interface); + mdp->phy_interface); if (IS_ERR(phydev)) { dev_err(&ndev->dev, "phy_connect failed\n"); return PTR_ERR(phydev); diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c index 72fc57d..21683e2 100644 --- a/drivers/net/ethernet/s6gmac.c +++ b/drivers/net/ethernet/s6gmac.c @@ -795,7 +795,7 @@ static inline int s6gmac_phy_start(struct net_device *dev) struct phy_device *p = NULL; while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i]))) i++; - p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0, + p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, PHY_INTERFACE_MODE_RGMII); if (IS_ERR(p)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 04ff63c..da5cc9a 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -997,9 +997,8 @@ static int smsc911x_mii_probe(struct net_device *dev) SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X", phydev->addr, phydev->phy_id); - ret = phy_connect_direct(dev, phydev, - &smsc911x_phy_adjust_link, 0, - pdata->config.phy_interface); + ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link, + pdata->config.phy_interface); if (ret) { netdev_err(dev, "Could not attach to PHY\n"); diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c index 3c58658..ecfb436 100644 --- a/drivers/net/ethernet/smsc/smsc9420.c +++ b/drivers/net/ethernet/smsc/smsc9420.c @@ -1179,7 +1179,7 @@ static int smsc9420_mii_probe(struct net_device *dev) phydev->phy_id); phydev = phy_connect(dev, dev_name(&phydev->dev), - smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII); + smsc9420_phy_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { pr_err("%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index f07c061..8c65729 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -428,8 +428,7 @@ static int stmmac_init_phy(struct net_device *dev) priv->plat->phy_addr); pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt); - phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, 0, - interface); + phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface); if (IS_ERR(phydev)) { pr_err("%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c index 70d1920..31bbbca 100644 --- a/drivers/net/ethernet/ti/cpmac.c +++ b/drivers/net/ethernet/ti/cpmac.c @@ -1172,8 +1172,8 @@ static int cpmac_probe(struct platform_device *pdev) snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); - priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); + priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, + PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phy)) { if (netif_msg_drv(priv)) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index bea736b..3772804 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -592,7 +592,7 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) 1 << slave_port, 0, ALE_MCAST_FWD_2); slave->phy = phy_connect(priv->ndev, slave->data->phy_id, - &cpsw_adjust_link, 0, slave->data->phy_if); + &cpsw_adjust_link, slave->data->phy_if); if (IS_ERR(slave->phy)) { dev_err(priv->dev, "phy %s not found on slave %d\n", slave->data->phy_id, slave->slave_num); diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 6621ae3..8478d98 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1599,7 +1599,7 @@ static int emac_dev_open(struct net_device *ndev) if (priv->phy_id && *priv->phy_id) { priv->phydev = phy_connect(ndev, priv->phy_id, - &emac_adjust_link, 0, + &emac_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phydev)) { diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c index f16410e..fe25609 100644 --- a/drivers/net/ethernet/toshiba/tc35815.c +++ b/drivers/net/ethernet/toshiba/tc35815.c @@ -633,9 +633,8 @@ static int tc_mii_probe(struct net_device *dev) /* attach the mac to the phy */ phydev = phy_connect(dev, dev_name(&phydev->dev), - &tc_handle_link_change, 0, - lp->chiptype == TC35815_TX4939 ? - PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII); + &tc_handle_link_change, + lp->chiptype == TC35815_TX4939 ? PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); return PTR_ERR(phydev); diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index a4be1ad..6958a5e 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1451,7 +1451,7 @@ static int eth_init_one(struct platform_device *pdev) snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, mdio_bus->id, plat->phy); - port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, + port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(port->phydev)) { err = PTR_ERR(port->phydev); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8af46e8..9930f99 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -416,16 +416,15 @@ static void phy_prepare_link(struct phy_device *phydev, * @dev: the network device to connect * @phydev: the pointer to the phy device * @handler: callback function for state change notifications - * @flags: PHY device's dev_flags * @interface: PHY device's interface */ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface) { int rc; - rc = phy_attach_direct(dev, phydev, flags, interface); + rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); if (rc) return rc; @@ -443,7 +442,6 @@ EXPORT_SYMBOL(phy_connect_direct); * @dev: the network device to connect * @bus_id: the id string of the PHY device to connect * @handler: callback function for state change notifications - * @flags: PHY device's dev_flags * @interface: PHY device's interface * * Description: Convenience function for connecting ethernet @@ -455,7 +453,7 @@ EXPORT_SYMBOL(phy_connect_direct); * the desired functionality. */ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface) { struct phy_device *phydev; @@ -471,7 +469,7 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, } phydev = to_phy_device(d); - rc = phy_connect_direct(dev, phydev, handler, flags, interface); + rc = phy_connect_direct(dev, phydev, handler, interface); if (rc) return ERR_PTR(rc); @@ -576,14 +574,13 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, * phy_attach - attach a network device to a particular PHY device * @dev: network device to attach * @bus_id: Bus ID of PHY device to attach - * @flags: PHY device's dev_flags * @interface: PHY device's interface * * Description: Same as phy_attach_direct() except that a PHY bus_id * string is passed instead of a pointer to a struct phy_device. */ struct phy_device *phy_attach(struct net_device *dev, - const char *bus_id, u32 flags, phy_interface_t interface) + const char *bus_id, phy_interface_t interface) { struct bus_type *bus = &mdio_bus_type; struct phy_device *phydev; @@ -599,7 +596,7 @@ struct phy_device *phy_attach(struct net_device *dev, } phydev = to_phy_device(d); - rc = phy_attach_direct(dev, phydev, flags, interface); + rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); if (rc) return ERR_PTR(rc); diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index c8e0aa8..fdbab72 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -377,7 +377,7 @@ static int ax88172a_reset(struct usbnet *dev) priv->phydev = phy_connect(dev->net, priv->phy_name, &ax88172a_adjust_link, - 0, PHY_INTERFACE_MODE_MII); + PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phydev)) { netdev_err(dev->net, "Could not connect to PHY device %s\n", priv->phy_name); diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 83ca06f..e3a8b22 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -157,7 +157,7 @@ struct phy_device *of_phy_connect(struct net_device *dev, if (!phy) return NULL; - return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy; + return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy; } EXPORT_SYMBOL(of_phy_connect); @@ -194,7 +194,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0])); - phy = phy_connect(dev, bus_id, hndlr, 0, iface); + phy = phy_connect(dev, bus_id, hndlr, iface); return IS_ERR(phy) ? NULL : phy; } EXPORT_SYMBOL(of_phy_connect_fixed_link); diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index f15059c..a0a30b3 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -3917,7 +3917,7 @@ static int et131x_mii_probe(struct net_device *netdev) } phydev = phy_connect(netdev, dev_name(&phydev->dev), - &et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII); + &et131x_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { dev_err(&adapter->pdev->dev, "Could not attach to PHY\n"); diff --git a/include/linux/phy.h b/include/linux/phy.h index 93b3cf7..33999ad 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -506,13 +506,13 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); struct phy_device * phy_attach(struct net_device *dev, - const char *bus_id, u32 flags, phy_interface_t interface); + const char *bus_id, phy_interface_t interface); struct phy_device *phy_find_first(struct mii_bus *bus); int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface); struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, - void (*handler)(struct net_device *), u32 flags, + void (*handler)(struct net_device *), phy_interface_t interface); void phy_disconnect(struct phy_device *phydev); void phy_detach(struct phy_device *phydev); diff --git a/net/dsa/slave.c b/net/dsa/slave.c index f795b0c..f434558 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -391,7 +391,7 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent, if (p->phy != NULL) { phy_attach(slave_dev, dev_name(&p->phy->dev), - 0, PHY_INTERFACE_MODE_GMII); + PHY_INTERFACE_MODE_GMII); p->phy->autoneg = AUTONEG_ENABLE; p->phy->speed = 0; -- cgit v0.10.2 From 73bf0d0eecba15e2a2f96b1092554b01fc07044b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 13 Jan 2013 07:46:34 +0000 Subject: ifb: dont hard code inet_net use ifb should lookup devices in the appropriate namespace. Signed-off-by: Eric Dumazet Acked-by: Jamal Hadi Salim Cc: Benjamin LaHaise Signed-off-by: David S. Miller diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 344dceb..8216438 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -90,7 +90,7 @@ static void ri_tasklet(unsigned long dev) u64_stats_update_end(&dp->tsync); rcu_read_lock(); - skb->dev = dev_get_by_index_rcu(&init_net, skb->skb_iif); + skb->dev = dev_get_by_index_rcu(dev_net(_dev), skb->skb_iif); if (!skb->dev) { rcu_read_unlock(); dev_kfree_skb(skb); -- cgit v0.10.2 From 55eb555d9674e2ebe9d4de0146602f96ff18e7d6 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 14 Jan 2013 21:17:25 -0500 Subject: drivers/net: delete orphaned MCA ibmlana driver content In commit a5e371f61ad33c07b28e7c9b60c78d71fdd34e2a ("drivers/net: delete all code/drivers depending on CONFIG_MCA") most of the MCA drivers went, including the Kconfig/Makefile hooks for ibmlana, but it seems that I missed the "git rm" on these actual driver files, and with the namespace overlap with machine check architecture, it got missed by various git grep type checking done at that time. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/natsemi/ibmlana.c b/drivers/net/ethernet/natsemi/ibmlana.c deleted file mode 100644 index 923e640..0000000 --- a/drivers/net/ethernet/natsemi/ibmlana.c +++ /dev/null @@ -1,1075 +0,0 @@ -/* -net-3-driver for the IBM LAN Adapter/A - -This is an extension to the Linux operating system, and is covered by the -same GNU General Public License that covers that work. - -Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, - alfred.arnold@lancom.de) - -This driver is based both on the SK_MCA driver, which is itself based on the -SK_G16 and 3C523 driver. - -paper sources: - 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by - Hans-Peter Messmer for the basic Microchannel stuff - - 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer - for help on Ethernet driver programming - - 'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National - Semiconductor for info on the MAC chip - - 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 - Document Number SC30-3661-00' by IBM for info on the adapter itself - - Also see http://www.national.com/analog - -special acknowledgements to: - - Bob Eager for helping me out with documentation from IBM - - Jim Shorney for his endless patience with me while I was using - him as a beta tester to trace down the address filter bug ;-) - - Missing things: - - -> set debug level via ioctl instead of compile-time switches - -> I didn't follow the development of the 2.1.x kernels, so my - assumptions about which things changed with which kernel version - are probably nonsense - -History: - Nov 6th, 1999 - startup from SK_MCA driver - Dec 6th, 1999 - finally got docs about the card. A big thank you to Bob Eager! - Dec 12th, 1999 - first packet received - Dec 13th, 1999 - recv queue done, tcpdump works - Dec 15th, 1999 - transmission part works - Dec 28th, 1999 - added usage of the isa_functions for Linux 2.3 . Things should - still work with 2.0.x.... - Jan 28th, 2000 - in Linux 2.2.13, the version.h file mysteriously didn't get - included. Added a workaround for this. Furthermore, it now - not only compiles as a modules ;-) - Jan 30th, 2000 - newer kernels automatically probe more than one board, so the - 'startslot' as a variable is also needed here - Apr 12th, 2000 - the interrupt mask register is not set 'hard' instead of individually - setting registers, since this seems to set bits that shouldn't be - set - May 21st, 2000 - reset interrupt status immediately after CAM load - add a recovery delay after releasing the chip's reset line - May 24th, 2000 - finally found the bug in the address filter setup - damned signed - chars! - June 1st, 2000 - corrected version codes, added support for the latest 2.3 changes - Oct 28th, 2002 - cleaned up for the 2.5 tree - - *************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define _IBM_LANA_DRIVER_ -#include "ibmlana.h" - -#undef DEBUG - -#define DRV_NAME "ibmlana" - -/* ------------------------------------------------------------------------ - * global static data - not more since we can handle multiple boards and - * have to pack all state info into the device struct! - * ------------------------------------------------------------------------ */ - -static char *MediaNames[Media_Count] = { - "10BaseT", "10Base5", "Unknown", "10Base2" -}; - -/* ------------------------------------------------------------------------ - * private subfunctions - * ------------------------------------------------------------------------ */ - -#ifdef DEBUG - /* dump all registers */ - -static void dumpregs(struct net_device *dev) -{ - int z; - - for (z = 0; z < 160; z += 2) { - if (!(z & 15)) - printk("REGS: %04x:", z); - printk(" %04x", inw(dev->base_addr + z)); - if ((z & 15) == 14) - printk("\n"); - } -} - -/* dump parts of shared memory - only needed during debugging */ - -static void dumpmem(struct net_device *dev, u32 start, u32 len) -{ - ibmlana_priv *priv = netdev_priv(dev); - int z; - - printk("Address %04x:\n", start); - for (z = 0; z < len; z++) { - if ((z & 15) == 0) - printk("%04x:", z); - printk(" %02x", readb(priv->base + start + z)); - if ((z & 15) == 15) - printk("\n"); - } - if ((z & 15) != 0) - printk("\n"); -} - -/* print exact time - ditto */ - -static void PrTime(void) -{ - struct timeval tv; - - do_gettimeofday(&tv); - printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec); -} -#endif /* DEBUG */ - -/* deduce resources out of POS registers */ - -static void getaddrs(struct mca_device *mdev, int *base, int *memlen, - int *iobase, int *irq, ibmlana_medium *medium) -{ - u_char pos0, pos1; - - pos0 = mca_device_read_stored_pos(mdev, 2); - pos1 = mca_device_read_stored_pos(mdev, 3); - - *base = 0xc0000 + ((pos1 & 0xf0) << 9); - *memlen = (pos1 & 0x01) ? 0x8000 : 0x4000; - *iobase = (pos0 & 0xe0) << 7; - switch (pos0 & 0x06) { - case 0: - *irq = 5; - break; - case 2: - *irq = 15; - break; - case 4: - *irq = 10; - break; - case 6: - *irq = 11; - break; - } - *medium = (pos0 & 0x18) >> 3; -} - -/* wait on register value with mask and timeout */ - -static int wait_timeout(struct net_device *dev, int regoffs, u16 mask, - u16 value, int timeout) -{ - unsigned long fin = jiffies + timeout; - - while (time_before(jiffies,fin)) - if ((inw(dev->base_addr + regoffs) & mask) == value) - return 1; - - return 0; -} - - -/* reset the whole board */ - -static void ResetBoard(struct net_device *dev) -{ - unsigned char bcmval; - - /* read original board control value */ - - bcmval = inb(dev->base_addr + BCMREG); - - /* set reset bit for a while */ - - bcmval |= BCMREG_RESET; - outb(bcmval, dev->base_addr + BCMREG); - udelay(10); - bcmval &= ~BCMREG_RESET; - outb(bcmval, dev->base_addr + BCMREG); - - /* switch over to RAM again */ - - bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN; - outb(bcmval, dev->base_addr + BCMREG); -} - -/* calculate RAM layout & set up descriptors in RAM */ - -static void InitDscrs(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - u32 addr, baddr, raddr; - int z; - tda_t tda; - rda_t rda; - rra_t rra; - - /* initialize RAM */ - - memset_io(priv->base, 0xaa, - dev->mem_start - dev->mem_start); /* XXX: typo? */ - - /* setup n TX descriptors - independent of RAM size */ - - priv->tdastart = addr = 0; - priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT; - for (z = 0; z < TXBUFCNT; z++) { - tda.status = 0; - tda.config = 0; - tda.length = 0; - tda.fragcount = 1; - tda.startlo = baddr; - tda.starthi = 0; - tda.fraglength = 0; - if (z == TXBUFCNT - 1) - tda.link = priv->tdastart; - else - tda.link = addr + sizeof(tda_t); - tda.link |= 1; - memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); - addr += sizeof(tda_t); - baddr += PKTSIZE; - } - - /* calculate how many receive buffers fit into remaining memory */ - - priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE); - - /* calculate receive addresses */ - - priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE); - priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)); - priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t)); - - for (z = 0; z < priv->rxbufcnt; z++) { - rra.startlo = baddr; - rra.starthi = 0; - rra.cntlo = PKTSIZE >> 1; - rra.cnthi = 0; - memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t)); - - rda.status = 0; - rda.length = 0; - rda.startlo = 0; - rda.starthi = 0; - rda.seqno = 0; - if (z < priv->rxbufcnt - 1) - rda.link = addr + sizeof(rda_t); - else - rda.link = 1; - rda.inuse = 1; - memcpy_toio(priv->base + addr, &rda, sizeof(rda_t)); - - baddr += PKTSIZE; - raddr += sizeof(rra_t); - addr += sizeof(rda_t); - } - - /* initialize current pointers */ - - priv->nextrxdescr = 0; - priv->lastrxdescr = priv->rxbufcnt - 1; - priv->nexttxdescr = 0; - priv->currtxdescr = 0; - priv->txusedcnt = 0; - memset(priv->txused, 0, sizeof(priv->txused)); -} - -/* set up Rx + Tx descriptors in SONIC */ - -static int InitSONIC(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - - /* set up start & end of resource area */ - - outw(0, SONIC_URRA); - outw(priv->rrastart, dev->base_addr + SONIC_RSA); - outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA); - outw(priv->rrastart, dev->base_addr + SONIC_RRP); - outw(priv->rrastart, dev->base_addr + SONIC_RWP); - - /* set EOBC so that only one packet goes into one buffer */ - - outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC); - - /* let SONIC read the first RRA descriptor */ - - outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG); - if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) { - printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name); - return 0; - } - - /* point SONIC to the first RDA */ - - outw(0, dev->base_addr + SONIC_URDA); - outw(priv->rdastart, dev->base_addr + SONIC_CRDA); - - /* set upper half of TDA address */ - - outw(0, dev->base_addr + SONIC_UTDA); - - return 1; -} - -/* stop SONIC so we can reinitialize it */ - -static void StopSONIC(struct net_device *dev) -{ - /* disable interrupts */ - - outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG); - outb(0, dev->base_addr + SONIC_IMREG); - - /* reset the SONIC */ - - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - udelay(10); - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); -} - -/* initialize card and SONIC for proper operation */ - -static void putcam(camentry_t * cams, int *camcnt, char *addr) -{ - camentry_t *pcam = cams + (*camcnt); - u8 *uaddr = (u8 *) addr; - - pcam->index = *camcnt; - pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0]; - pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2]; - pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4]; - (*camcnt)++; -} - -static void InitBoard(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - int camcnt; - camentry_t cams[16]; - u32 cammask; - struct netdev_hw_addr *ha; - u16 rcrval; - - /* reset the SONIC */ - - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - udelay(10); - - /* clear all spurious interrupts */ - - outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG); - - /* set up the SONIC's bus interface - constant for this adapter - - must be done while the SONIC is in reset */ - - outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG); - outw(0, dev->base_addr + SONIC_DCREG2); - - /* remove reset form the SONIC */ - - outw(0, dev->base_addr + SONIC_CMDREG); - udelay(10); - - /* data sheet requires URRA to be programmed before setting up the CAM contents */ - - outw(0, dev->base_addr + SONIC_URRA); - - /* program the CAM entry 0 to the device address */ - - camcnt = 0; - putcam(cams, &camcnt, dev->dev_addr); - - /* start putting the multicast addresses into the CAM list. Stop if - it is full. */ - - netdev_for_each_mc_addr(ha, dev) { - putcam(cams, &camcnt, ha->addr); - if (camcnt == 16) - break; - } - - /* calculate CAM mask */ - - cammask = (1 << camcnt) - 1; - - /* feed CDA into SONIC, initialize RCR value (always get broadcasts) */ - - memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt); - memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask)); - -#ifdef DEBUG - printk("CAM setup:\n"); - dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask)); -#endif - - outw(0, dev->base_addr + SONIC_CAMPTR); - outw(camcnt, dev->base_addr + SONIC_CAMCNT); - outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG); - if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) { - printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name); - return; - } else { - /* clear interrupt condition */ - - outw(ISREG_LCD, dev->base_addr + SONIC_ISREG); - -#ifdef DEBUG - printk("Loading CAM done, address pointers %04x:%04x\n", - inw(dev->base_addr + SONIC_URRA), - inw(dev->base_addr + SONIC_CAMPTR)); - { - int z; - - printk("\n-->CAM: PTR %04x CNT %04x\n", - inw(dev->base_addr + SONIC_CAMPTR), - inw(dev->base_addr + SONIC_CAMCNT)); - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - for (z = 0; z < camcnt; z++) { - outw(z, dev->base_addr + SONIC_CAMEPTR); - printk("Entry %d: %04x %04x %04x\n", z, - inw(dev->base_addr + SONIC_CAMADDR0), - inw(dev->base_addr + SONIC_CAMADDR1), - inw(dev->base_addr + SONIC_CAMADDR2)); - } - outw(0, dev->base_addr + SONIC_CMDREG); - } -#endif - } - - rcrval = RCREG_BRD | RCREG_LB_NONE; - - /* if still multicast addresses left or ALLMULTI is set, set the multicast - enable bit */ - - if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt) - rcrval |= RCREG_AMC; - - /* promiscuous mode ? */ - - if (dev->flags & IFF_PROMISC) - rcrval |= RCREG_PRO; - - /* program receive mode */ - - outw(rcrval, dev->base_addr + SONIC_RCREG); -#ifdef DEBUG - printk("\nRCRVAL: %04x\n", rcrval); -#endif - - /* set up descriptors in shared memory + feed them into SONIC registers */ - - InitDscrs(dev); - if (!InitSONIC(dev)) - return; - - /* reset all pending interrupts */ - - outw(0xffff, dev->base_addr + SONIC_ISREG); - - /* enable transmitter + receiver interrupts */ - - outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG); - outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG); - - /* turn on card interrupts */ - - outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG); - -#ifdef DEBUG - printk("Register dump after initialization:\n"); - dumpregs(dev); -#endif -} - -/* start transmission of a descriptor */ - -static void StartTx(struct net_device *dev, int descr) -{ - ibmlana_priv *priv = netdev_priv(dev); - int addr; - - addr = priv->tdastart + (descr * sizeof(tda_t)); - - /* put descriptor address into SONIC */ - - outw(addr, dev->base_addr + SONIC_CTDA); - - /* trigger transmitter */ - - priv->currtxdescr = descr; - outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG); -} - -/* ------------------------------------------------------------------------ - * interrupt handler(s) - * ------------------------------------------------------------------------ */ - -/* receive buffer area exhausted */ - -static void irqrbe_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - - /* point the SONIC back to the RRA start */ - - outw(priv->rrastart, dev->base_addr + SONIC_RRP); - outw(priv->rrastart, dev->base_addr + SONIC_RWP); -} - -/* receive interrupt */ - -static void irqrx_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - rda_t rda; - u32 rdaaddr, lrdaaddr; - - /* loop until ... */ - - while (1) { - /* read descriptor that was next to be filled by SONIC */ - - rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t)); - lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t)); - memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t)); - - /* iron out upper word halves of fields we use - SONIC will duplicate - bits 0..15 to 16..31 */ - - rda.status &= 0xffff; - rda.length &= 0xffff; - rda.startlo &= 0xffff; - - /* stop if the SONIC still owns it, i.e. there is no data for us */ - - if (rda.inuse) - break; - - /* good packet? */ - - else if (rda.status & RCREG_PRX) { - struct sk_buff *skb; - - /* fetch buffer */ - - skb = netdev_alloc_skb(dev, rda.length + 2); - if (skb == NULL) - dev->stats.rx_dropped++; - else { - /* copy out data */ - - memcpy_fromio(skb_put(skb, rda.length), - priv->base + - rda.startlo, rda.length); - - /* set up skb fields */ - - skb->protocol = eth_type_trans(skb, dev); - skb_checksum_none_assert(skb); - - /* bookkeeping */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += rda.length; - - /* pass to the upper layers */ - netif_rx(skb); - } - } - - /* otherwise check error status bits and increase statistics */ - - else { - dev->stats.rx_errors++; - if (rda.status & RCREG_FAER) - dev->stats.rx_frame_errors++; - if (rda.status & RCREG_CRCR) - dev->stats.rx_crc_errors++; - } - - /* descriptor processed, will become new last descriptor in queue */ - - rda.link = 1; - rda.inuse = 1; - memcpy_toio(priv->base + rdaaddr, &rda, - sizeof(rda_t)); - - /* set up link and EOL = 0 in currently last descriptor. Only write - the link field since the SONIC may currently already access the - other fields. */ - - memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4); - - /* advance indices */ - - priv->lastrxdescr = priv->nextrxdescr; - if ((++priv->nextrxdescr) >= priv->rxbufcnt) - priv->nextrxdescr = 0; - } -} - -/* transmit interrupt */ - -static void irqtx_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - tda_t tda; - - /* fetch descriptor (we forgot the size ;-) */ - memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); - - /* update statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += tda.length; - - /* update our pointers */ - priv->txused[priv->currtxdescr] = 0; - priv->txusedcnt--; - - /* if there are more descriptors present in RAM, start them */ - if (priv->txusedcnt > 0) - StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); - - /* tell the upper layer we can go on transmitting */ - netif_wake_queue(dev); -} - -static void irqtxerr_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - tda_t tda; - - /* fetch descriptor to check status */ - memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); - - /* update statistics */ - dev->stats.tx_errors++; - if (tda.status & (TCREG_NCRS | TCREG_CRSL)) - dev->stats.tx_carrier_errors++; - if (tda.status & TCREG_EXC) - dev->stats.tx_aborted_errors++; - if (tda.status & TCREG_OWC) - dev->stats.tx_window_errors++; - if (tda.status & TCREG_FU) - dev->stats.tx_fifo_errors++; - - /* update our pointers */ - priv->txused[priv->currtxdescr] = 0; - priv->txusedcnt--; - - /* if there are more descriptors present in RAM, start them */ - if (priv->txusedcnt > 0) - StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); - - /* tell the upper layer we can go on transmitting */ - netif_wake_queue(dev); -} - -/* general interrupt entry */ - -static irqreturn_t irq_handler(int dummy, void *device) -{ - struct net_device *dev = device; - u16 ival; - - /* in case we're not meant... */ - if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND)) - return IRQ_NONE; - - /* loop through the interrupt bits until everything is clear */ - while (1) { - ival = inw(dev->base_addr + SONIC_ISREG); - - if (ival & ISREG_RBE) { - irqrbe_handler(dev); - outw(ISREG_RBE, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_PKTRX) { - irqrx_handler(dev); - outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_TXDN) { - irqtx_handler(dev); - outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_TXER) { - irqtxerr_handler(dev); - outw(ISREG_TXER, dev->base_addr + SONIC_ISREG); - } - break; - } - return IRQ_HANDLED; -} - -/* ------------------------------------------------------------------------ - * driver methods - * ------------------------------------------------------------------------ */ - -/* MCA info */ - -#if 0 /* info available elsewhere, but this is kept for reference */ -static int ibmlana_getinfo(char *buf, int slot, void *d) -{ - int len = 0, i; - struct net_device *dev = (struct net_device *) d; - ibmlana_priv *priv; - - /* can't say anything about an uninitialized device... */ - - if (dev == NULL) - return len; - priv = netdev_priv(dev); - - /* print info */ - - len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); - len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr); - len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1); - len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]); - len += sprintf(buf + len, "Device: %s\n", dev->name); - len += sprintf(buf + len, "MAC address:"); - for (i = 0; i < 6; i++) - len += sprintf(buf + len, " %02x", dev->dev_addr[i]); - buf[len++] = '\n'; - buf[len] = 0; - - return len; -} -#endif - -/* open driver. Means also initialization and start of LANCE */ - -static int ibmlana_open(struct net_device *dev) -{ - int result; - ibmlana_priv *priv = netdev_priv(dev); - - /* register resources - only necessary for IRQ */ - - result = request_irq(priv->realirq, irq_handler, IRQF_SHARED, - dev->name, dev); - if (result != 0) { - printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq); - return result; - } - dev->irq = priv->realirq; - - /* set up the card and SONIC */ - InitBoard(dev); - - /* initialize operational flags */ - netif_start_queue(dev); - return 0; -} - -/* close driver. Shut down board and free allocated resources */ - -static int ibmlana_close(struct net_device *dev) -{ - /* turn off board */ - - /* release resources */ - if (dev->irq != 0) - free_irq(dev->irq, dev); - dev->irq = 0; - return 0; -} - -/* transmit a block. */ - -static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - int tmplen, addr; - unsigned long flags; - tda_t tda; - int baddr; - - /* find out if there are free slots for a frame to transmit. If not, - the upper layer is in deep desperation and we simply ignore the frame. */ - - if (priv->txusedcnt >= TXBUFCNT) { - dev->stats.tx_dropped++; - goto tx_done; - } - - /* copy the frame data into the next free transmit buffer - fillup missing */ - tmplen = skb->len; - if (tmplen < 60) - tmplen = 60; - baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE); - memcpy_toio(priv->base + baddr, skb->data, skb->len); - - /* copy filler into RAM - in case we're filling up... - we're filling a bit more than necessary, but that doesn't harm - since the buffer is far larger... - Sorry Linus for the filler string but I couldn't resist ;-) */ - - if (tmplen > skb->len) { - char *fill = "NetBSD is a nice OS too! "; - unsigned int destoffs = skb->len, l = strlen(fill); - - while (destoffs < tmplen) { - memcpy_toio(priv->base + baddr + destoffs, fill, l); - destoffs += l; - } - } - - /* set up the new frame descriptor */ - addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t)); - memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t)); - tda.length = tda.fraglength = tmplen; - memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); - - /* if there were no active descriptors, trigger the SONIC */ - spin_lock_irqsave(&priv->lock, flags); - - priv->txusedcnt++; - priv->txused[priv->nexttxdescr] = 1; - - /* are all transmission slots used up ? */ - if (priv->txusedcnt >= TXBUFCNT) - netif_stop_queue(dev); - - if (priv->txusedcnt == 1) - StartTx(dev, priv->nexttxdescr); - priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT; - - spin_unlock_irqrestore(&priv->lock, flags); -tx_done: - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* switch receiver mode. */ - -static void ibmlana_set_multicast_list(struct net_device *dev) -{ - /* first stop the SONIC... */ - StopSONIC(dev); - /* ...then reinit it with the new flags */ - InitBoard(dev); -} - -/* ------------------------------------------------------------------------ - * hardware check - * ------------------------------------------------------------------------ */ - -static int ibmlana_irq; -static int ibmlana_io; -static int startslot; /* counts through slots when probing multiple devices */ - -static short ibmlana_adapter_ids[] __initdata = { - IBM_LANA_ID, - 0x0000 -}; - -static char *ibmlana_adapter_names[] = { - "IBM LAN Adapter/A", - NULL -}; - - -static const struct net_device_ops ibmlana_netdev_ops = { - .ndo_open = ibmlana_open, - .ndo_stop = ibmlana_close, - .ndo_start_xmit = ibmlana_tx, - .ndo_set_rx_mode = ibmlana_set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int ibmlana_init_one(struct device *kdev) -{ - struct mca_device *mdev = to_mca_device(kdev); - struct net_device *dev; - int slot = mdev->slot, z, rc; - int base = 0, irq = 0, iobase = 0, memlen = 0; - ibmlana_priv *priv; - ibmlana_medium medium; - - dev = alloc_etherdev(sizeof(ibmlana_priv)); - if (!dev) - return -ENOMEM; - - dev->irq = ibmlana_irq; - dev->base_addr = ibmlana_io; - - base = dev->mem_start; - irq = dev->irq; - - /* deduce card addresses */ - getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium); - - /* were we looking for something different ? */ - if (dev->irq && dev->irq != irq) { - rc = -ENODEV; - goto err_out; - } - if (dev->mem_start && dev->mem_start != base) { - rc = -ENODEV; - goto err_out; - } - - /* announce success */ - printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1); - - /* try to obtain I/O range */ - if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) { - printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase); - startslot = slot + 1; - rc = -EBUSY; - goto err_out; - } - - priv = netdev_priv(dev); - priv->slot = slot; - priv->realirq = mca_device_transform_irq(mdev, irq); - priv->medium = medium; - spin_lock_init(&priv->lock); - - /* set base + irq for this device (irq not allocated so far) */ - - dev->irq = 0; - dev->mem_start = base; - dev->mem_end = base + memlen; - dev->base_addr = iobase; - - priv->base = ioremap(base, memlen); - if (!priv->base) { - printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME); - startslot = slot + 1; - rc = -EBUSY; - goto err_out_reg; - } - - mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]); - mca_device_set_claim(mdev, 1); - - /* set methods */ - dev->netdev_ops = &ibmlana_netdev_ops; - dev->flags |= IFF_MULTICAST; - - /* copy out MAC address */ - - for (z = 0; z < ETH_ALEN; z++) - dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); - - /* print config */ - - printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, " - "MAC address %pM.\n", - dev->name, priv->realirq, dev->base_addr, - dev->mem_start, dev->mem_end - 1, - dev->dev_addr); - printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]); - - /* reset board */ - - ResetBoard(dev); - - /* next probe will start at next slot */ - - startslot = slot + 1; - - rc = register_netdev(dev); - if (rc) - goto err_out_claimed; - - dev_set_drvdata(kdev, dev); - return 0; - -err_out_claimed: - mca_device_set_claim(mdev, 0); - iounmap(priv->base); -err_out_reg: - release_region(iobase, IBM_LANA_IORANGE); -err_out: - free_netdev(dev); - return rc; -} - -static int ibmlana_remove_one(struct device *kdev) -{ - struct mca_device *mdev = to_mca_device(kdev); - struct net_device *dev = dev_get_drvdata(kdev); - ibmlana_priv *priv = netdev_priv(dev); - - unregister_netdev(dev); - /*DeinitBoard(dev); */ - release_region(dev->base_addr, IBM_LANA_IORANGE); - mca_device_set_claim(mdev, 0); - iounmap(priv->base); - free_netdev(dev); - return 0; -} - -/* ------------------------------------------------------------------------ - * modularization support - * ------------------------------------------------------------------------ */ - -module_param_named(irq, ibmlana_irq, int, 0); -module_param_named(io, ibmlana_io, int, 0); -MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number"); -MODULE_PARM_DESC(io, "IBM LAN/A I/O base address"); -MODULE_LICENSE("GPL"); - -static struct mca_driver ibmlana_driver = { - .id_table = ibmlana_adapter_ids, - .driver = { - .name = "ibmlana", - .bus = &mca_bus_type, - .probe = ibmlana_init_one, - .remove = ibmlana_remove_one, - }, -}; - -static int __init ibmlana_init_module(void) -{ - return mca_register_driver(&ibmlana_driver); -} - -static void __exit ibmlana_cleanup_module(void) -{ - mca_unregister_driver(&ibmlana_driver); -} - -module_init(ibmlana_init_module); -module_exit(ibmlana_cleanup_module); diff --git a/drivers/net/ethernet/natsemi/ibmlana.h b/drivers/net/ethernet/natsemi/ibmlana.h deleted file mode 100644 index accd5ef..0000000 --- a/drivers/net/ethernet/natsemi/ibmlana.h +++ /dev/null @@ -1,278 +0,0 @@ -#ifndef _IBM_LANA_INCLUDE_ -#define _IBM_LANA_INCLUDE_ - -#ifdef _IBM_LANA_DRIVER_ - -/* maximum packet size */ - -#define PKTSIZE 1524 - -/* number of transmit buffers */ - -#define TXBUFCNT 4 - -/* Adapter ID's */ -#define IBM_LANA_ID 0xffe0 - -/* media enumeration - defined in a way that it fits onto the LAN/A's - POS registers... */ - -typedef enum { - Media_10BaseT, Media_10Base5, - Media_Unknown, Media_10Base2, Media_Count -} ibmlana_medium; - -/* private structure */ - -typedef struct { - unsigned int slot; /* MCA-Slot-# */ - int realirq; /* memorizes actual IRQ, even when - currently not allocated */ - ibmlana_medium medium; /* physical cannector */ - u32 tdastart, txbufstart, /* addresses */ - rrastart, rxbufstart, rdastart, rxbufcnt, txusedcnt; - int nextrxdescr, /* next rx descriptor to be used */ - lastrxdescr, /* last free rx descriptor */ - nexttxdescr, /* last tx descriptor to be used */ - currtxdescr, /* tx descriptor currently tx'ed */ - txused[TXBUFCNT]; /* busy flags */ - void __iomem *base; - spinlock_t lock; -} ibmlana_priv; - -/* this card uses quite a lot of I/O ports...luckily the MCA bus decodes - a full 64K I/O range... */ - -#define IBM_LANA_IORANGE 0xa0 - -/* Command Register: */ - -#define SONIC_CMDREG 0x00 -#define CMDREG_HTX 0x0001 /* halt transmission */ -#define CMDREG_TXP 0x0002 /* start transmission */ -#define CMDREG_RXDIS 0x0004 /* disable receiver */ -#define CMDREG_RXEN 0x0008 /* enable receiver */ -#define CMDREG_STP 0x0010 /* stop timer */ -#define CMDREG_ST 0x0020 /* start timer */ -#define CMDREG_RST 0x0080 /* software reset */ -#define CMDREG_RRRA 0x0100 /* force SONIC to read first RRA */ -#define CMDREG_LCAM 0x0200 /* force SONIC to read CAM descrs */ - -/* Data Configuration Register */ - -#define SONIC_DCREG 0x02 -#define DCREG_EXBUS 0x8000 /* Extended Bus Mode */ -#define DCREG_LBR 0x2000 /* Latched Bus Retry */ -#define DCREG_PO1 0x1000 /* Programmable Outputs */ -#define DCREG_PO0 0x0800 -#define DCREG_SBUS 0x0400 /* Synchronous Bus Mode */ -#define DCREG_USR1 0x0200 /* User Definable Pins */ -#define DCREG_USR0 0x0100 -#define DCREG_WC0 0x0000 /* 0..3 Wait States */ -#define DCREG_WC1 0x0040 -#define DCREG_WC2 0x0080 -#define DCREG_WC3 0x00c0 -#define DCREG_DW16 0x0000 /* 16 bit Bus Mode */ -#define DCREG_DW32 0x0020 /* 32 bit Bus Mode */ -#define DCREG_BMS 0x0010 /* Block Mode Select */ -#define DCREG_RFT4 0x0000 /* 4/8/16/24 bytes RX Threshold */ -#define DCREG_RFT8 0x0004 -#define DCREG_RFT16 0x0008 -#define DCREG_RFT24 0x000c -#define DCREG_TFT8 0x0000 /* 8/16/24/28 bytes TX Threshold */ -#define DCREG_TFT16 0x0001 -#define DCREG_TFT24 0x0002 -#define DCREG_TFT28 0x0003 - -/* Receive Control Register */ - -#define SONIC_RCREG 0x04 -#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */ -#define RCREG_RNT 0x4000 /* accept packets that are < 64 */ -#define RCREG_BRD 0x2000 /* accept broadcasts */ -#define RCREG_PRO 0x1000 /* promiscuous mode */ -#define RCREG_AMC 0x0800 /* accept all multicasts */ -#define RCREG_LB_NONE 0x0000 /* no loopback */ -#define RCREG_LB_MAC 0x0200 /* MAC loopback */ -#define RCREG_LB_ENDEC 0x0400 /* ENDEC loopback */ -#define RCREG_LB_XVR 0x0600 /* Transceiver loopback */ -#define RCREG_MC 0x0100 /* Multicast received */ -#define RCREG_BC 0x0080 /* Broadcast received */ -#define RCREG_LPKT 0x0040 /* last packet in RBA */ -#define RCREG_CRS 0x0020 /* carrier sense present */ -#define RCREG_COL 0x0010 /* recv'd packet with collision */ -#define RCREG_CRCR 0x0008 /* recv'd packet with CRC error */ -#define RCREG_FAER 0x0004 /* recv'd packet with inv. framing */ -#define RCREG_LBK 0x0002 /* recv'd loopback packet */ -#define RCREG_PRX 0x0001 /* recv'd packet is OK */ - -/* Transmit Control Register */ - -#define SONIC_TCREG 0x06 -#define TCREG_PINT 0x8000 /* generate interrupt after TDA read */ -#define TCREG_POWC 0x4000 /* timer start out of window detect */ -#define TCREG_CRCI 0x2000 /* inhibit CRC generation */ -#define TCREG_EXDIS 0x1000 /* disable excessive deferral timer */ -#define TCREG_EXD 0x0400 /* excessive deferral occurred */ -#define TCREG_DEF 0x0200 /* single deferral occurred */ -#define TCREG_NCRS 0x0100 /* no carrier detected */ -#define TCREG_CRSL 0x0080 /* carrier lost */ -#define TCREG_EXC 0x0040 /* excessive collisions occurred */ -#define TCREG_OWC 0x0020 /* out of window collision occurred */ -#define TCREG_PMB 0x0008 /* packet monitored bad */ -#define TCREG_FU 0x0004 /* FIFO underrun */ -#define TCREG_BCM 0x0002 /* byte count mismatch of fragments */ -#define TCREG_PTX 0x0001 /* packet transmitted OK */ - -/* Interrupt Mask Register */ - -#define SONIC_IMREG 0x08 -#define IMREG_BREN 0x4000 /* interrupt when bus retry occurred */ -#define IMREG_HBLEN 0x2000 /* interrupt when heartbeat lost */ -#define IMREG_LCDEN 0x1000 /* interrupt when CAM loaded */ -#define IMREG_PINTEN 0x0800 /* interrupt when PINT in TDA set */ -#define IMREG_PRXEN 0x0400 /* interrupt when packet received */ -#define IMREG_PTXEN 0x0200 /* interrupt when packet was sent */ -#define IMREG_TXEREN 0x0100 /* interrupt when send failed */ -#define IMREG_TCEN 0x0080 /* interrupt when timer completed */ -#define IMREG_RDEEN 0x0040 /* interrupt when RDA exhausted */ -#define IMREG_RBEEN 0x0020 /* interrupt when RBA exhausted */ -#define IMREG_RBAEEN 0x0010 /* interrupt when RBA too short */ -#define IMREG_CRCEN 0x0008 /* interrupt when CRC counter rolls */ -#define IMREG_FAEEN 0x0004 /* interrupt when FAE counter rolls */ -#define IMREG_MPEN 0x0002 /* interrupt when MP counter rolls */ -#define IMREG_RFOEN 0x0001 /* interrupt when Rx FIFO overflows */ - -/* Interrupt Status Register */ - -#define SONIC_ISREG 0x0a -#define ISREG_BR 0x4000 /* bus retry occurred */ -#define ISREG_HBL 0x2000 /* heartbeat lost */ -#define ISREG_LCD 0x1000 /* CAM loaded */ -#define ISREG_PINT 0x0800 /* PINT in TDA set */ -#define ISREG_PKTRX 0x0400 /* packet received */ -#define ISREG_TXDN 0x0200 /* packet was sent */ -#define ISREG_TXER 0x0100 /* send failed */ -#define ISREG_TC 0x0080 /* timer completed */ -#define ISREG_RDE 0x0040 /* RDA exhausted */ -#define ISREG_RBE 0x0020 /* RBA exhausted */ -#define ISREG_RBAE 0x0010 /* RBA too short for received frame */ -#define ISREG_CRC 0x0008 /* CRC counter rolls over */ -#define ISREG_FAE 0x0004 /* FAE counter rolls over */ -#define ISREG_MP 0x0002 /* MP counter rolls over */ -#define ISREG_RFO 0x0001 /* Rx FIFO overflows */ - -#define SONIC_UTDA 0x0c /* current transmit descr address */ -#define SONIC_CTDA 0x0e - -#define SONIC_URDA 0x1a /* current receive descr address */ -#define SONIC_CRDA 0x1c - -#define SONIC_CRBA0 0x1e /* current receive buffer address */ -#define SONIC_CRBA1 0x20 - -#define SONIC_RBWC0 0x22 /* word count in receive buffer */ -#define SONIC_RBWC1 0x24 - -#define SONIC_EOBC 0x26 /* minimum space to be free in RBA */ - -#define SONIC_URRA 0x28 /* upper address of CDA & Recv Area */ - -#define SONIC_RSA 0x2a /* start of receive resource area */ - -#define SONIC_REA 0x2c /* end of receive resource area */ - -#define SONIC_RRP 0x2e /* resource read pointer */ - -#define SONIC_RWP 0x30 /* resource write pointer */ - -#define SONIC_CAMEPTR 0x42 /* CAM entry pointer */ - -#define SONIC_CAMADDR2 0x44 /* CAM address ports */ -#define SONIC_CAMADDR1 0x46 -#define SONIC_CAMADDR0 0x48 - -#define SONIC_CAMPTR 0x4c /* lower address of CDA */ - -#define SONIC_CAMCNT 0x4e /* # of CAM descriptors to load */ - -/* Data Configuration Register 2 */ - -#define SONIC_DCREG2 0x7e -#define DCREG2_EXPO3 0x8000 /* extended programmable outputs */ -#define DCREG2_EXPO2 0x4000 -#define DCREG2_EXPO1 0x2000 -#define DCREG2_EXPO0 0x1000 -#define DCREG2_HD 0x0800 /* heartbeat disable */ -#define DCREG2_JD 0x0200 /* jabber timer disable */ -#define DCREG2_AUTO 0x0100 /* enable AUI/TP auto selection */ -#define DCREG2_XWRAP 0x0040 /* TP transceiver loopback */ -#define DCREG2_PH 0x0010 /* HOLD request timing */ -#define DCREG2_PCM 0x0004 /* packet compress when matched */ -#define DCREG2_PCNM 0x0002 /* packet compress when not matched */ -#define DCREG2_RJCM 0x0001 /* inverse packet match via CAM */ - -/* Board Control Register: Enable RAM, Interrupts... */ - -#define BCMREG 0x80 -#define BCMREG_RAMEN 0x80 /* switch over to RAM */ -#define BCMREG_IPEND 0x40 /* interrupt pending ? */ -#define BCMREG_RESET 0x08 /* reset board */ -#define BCMREG_16BIT 0x04 /* adapter in 16-bit slot */ -#define BCMREG_RAMWIN 0x02 /* enable RAM window */ -#define BCMREG_IEN 0x01 /* interrupt enable */ - -/* MAC Address PROM */ - -#define MACADDRPROM 0x92 - -/* structure of a CAM entry */ - -typedef struct { - u32 index; /* pointer into CAM area */ - u32 addr0; /* address part (bits 0..15 used) */ - u32 addr1; - u32 addr2; -} camentry_t; - -/* structure of a receive resource */ - -typedef struct { - u32 startlo; /* start address (bits 0..15 used) */ - u32 starthi; - u32 cntlo; /* size in 16-bit quantities */ - u32 cnthi; -} rra_t; - -/* structure of a receive descriptor */ - -typedef struct { - u32 status; /* packet status */ - u32 length; /* length in bytes */ - u32 startlo; /* start address */ - u32 starthi; - u32 seqno; /* frame sequence */ - u32 link; /* pointer to next descriptor */ - /* bit 0 = EOL */ - u32 inuse; /* !=0 --> free for SONIC to write */ -} rda_t; - -/* structure of a transmit descriptor */ - -typedef struct { - u32 status; /* transmit status */ - u32 config; /* value for TCR */ - u32 length; /* total length */ - u32 fragcount; /* number of fragments */ - u32 startlo; /* start address of fragment */ - u32 starthi; - u32 fraglength; /* length of this fragment */ - /* more address/length triplets may */ - /* follow here */ - u32 link; /* pointer to next descriptor */ - /* bit 0 = EOL */ -} tda_t; - -#endif /* _IBM_LANA_DRIVER_ */ - -#endif /* _IBM_LANA_INCLUDE_ */ -- cgit v0.10.2 From a74801c59ec1e463d93fbb670d16e4f8f4044c7d Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 14 Jan 2013 05:11:41 +0000 Subject: bnx2x: Clear dirty status when booting after UNDI Self-tests following boot from SAN have failed as the UNDI driver might leave some NIG interrupt indications. This patch does the clean-up, clearing those indications and allowing the test to pass. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f808ed0..6578e41 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9854,6 +9854,8 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) prev_undi = true; /* clear the UNDI indication */ REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + /* clear possible idle check errors */ + REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); } } /* wait until BRB is empty */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index a015965..765e2dc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -2154,6 +2154,8 @@ /* [R 32] Interrupt register #0 read */ #define NIG_REG_NIG_INT_STS_0 0x103b0 #define NIG_REG_NIG_INT_STS_1 0x103c0 +/* [RC 32] Interrupt register #0 read clear */ +#define NIG_REG_NIG_INT_STS_CLR_0 0x103b4 /* [R 32] Legacy E1 and E1H location for parity error mask register. */ #define NIG_REG_NIG_PRTY_MASK 0x103dc /* [RW 32] Parity mask register #0 read/write */ -- cgit v0.10.2 From c14a09b785d611b3d4a6457aff1fe194780eca25 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 14 Jan 2013 05:11:42 +0000 Subject: bnx2x: Add an additional fatal hw assertion - BRB_HW_INTERRUPT Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 02c93e3..cab91da 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2154,6 +2154,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, (AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT) #define HW_PRTY_ASSERT_SET_0 (AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \ AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 765e2dc..dec014e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -5991,6 +5991,7 @@ #define HW_LOCK_RESOURCE_SPIO 2 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT (0x1<<19) #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31) #define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30) -- cgit v0.10.2 From f72839d036d5ae7db43772224eb33608bcb9b5f5 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 14 Jan 2013 05:11:43 +0000 Subject: bnx2x: use SAN Mac for FCoE. Current logic causes chips running in switch dependent multi-function FCoE mode not to configure their MAC, leading to an all 0s MAC. This patch configures the interface with the SAN Mac instead. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6578e41..4c91f3b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10789,7 +10789,7 @@ static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp) /* Zero primary MAC configuration */ memset(bp->dev->dev_addr, 0, ETH_ALEN); - if (IS_MF_FCOE_AFEX(bp)) + if (IS_MF_FCOE_AFEX(bp) || IS_MF_FCOE_SD(bp)) /* use FIP MAC as primary MAC */ memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN); -- cgit v0.10.2 From a336ca7cc5c87677c77381e01754e9491b20e38c Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Mon, 14 Jan 2013 05:11:44 +0000 Subject: bnx2x: Fix rare self-test failures On rare occasions, self test link may fail since the link is being sampled while it's still being stabilized. To correct this behaviour, try to sample the link for 2 seconds prior to declaring a failure. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index d7029c8..55f1cb0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2379,8 +2379,8 @@ static void bnx2x_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) { struct bnx2x *bp = netdev_priv(dev); - u8 is_serdes; - int rc; + u8 is_serdes, link_up; + int rc, cnt = 0; if (bp->recovery_state != BNX2X_RECOVERY_DONE) { netdev_err(bp->dev, @@ -2402,20 +2402,17 @@ static void bnx2x_self_test(struct net_device *dev, } is_serdes = (bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0; - + link_up = bp->link_vars.link_up; /* offline tests are not supported in MF mode */ if ((etest->flags & ETH_TEST_FL_OFFLINE) && !IS_MF(bp)) { int port = BP_PORT(bp); u32 val; - u8 link_up; /* save current value of input enable for TX port IF */ val = REG_RD(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4); /* disable input for TX port IF */ REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0); - link_up = bp->link_vars.link_up; - bnx2x_nic_unload(bp, UNLOAD_NORMAL, false); rc = bnx2x_nic_load(bp, LOAD_DIAG); if (rc) { @@ -2477,7 +2474,13 @@ static void bnx2x_self_test(struct net_device *dev, etest->flags |= ETH_TEST_FL_FAILED; } - if (bnx2x_link_test(bp, is_serdes) != 0) { + if (link_up) { + cnt = 100; + while (bnx2x_link_test(bp, is_serdes) && --cnt) + msleep(20); + } + + if (!cnt) { if (!IS_MF(bp)) buf[6] = 1; else -- cgit v0.10.2 From 4ba7699be9e038b3f4d4857ef5d2150ebd9a7b60 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 14 Jan 2013 05:11:45 +0000 Subject: bnx2x: Added nvram personalities support When a device is configured to act as either iscsi or fcoe device in its nvram, prevent the other from being misused by preventing its activation in the driver. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 3369a50..d2e79be 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -899,6 +899,10 @@ struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ #define PORT_FEAT_CFG_DCBX_DISABLED 0x00000000 #define PORT_FEAT_CFG_DCBX_ENABLED 0x00000100 + #define PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK 0x00000C00 + #define PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE 0x00000400 + #define PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI 0x00000800 + #define PORT_FEATURE_EN_SIZE_MASK 0x0f000000 #define PORT_FEATURE_EN_SIZE_SHIFT 24 #define PORT_FEATURE_WOL_ENABLED 0x01000000 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 4c91f3b..f4d4896 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10570,6 +10570,13 @@ static void bnx2x_get_port_hwinfo(struct bnx2x *bp) bp->wol = (!(bp->flags & NO_WOL_FLAG) && (config & PORT_FEATURE_WOL_ENABLED)); + if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == + PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp)) + bp->flags |= NO_ISCSI_FLAG; + if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == + PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp))) + bp->flags |= NO_FCOE_FLAG; + BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n", bp->link_params.lane_config, bp->link_params.speed_cap_mask[0], -- cgit v0.10.2 From 07ba6af465aa551326e18133c085035d2059cabc Mon Sep 17 00:00:00 2001 From: Miriam Shitrit Date: Mon, 14 Jan 2013 05:11:46 +0000 Subject: bnx2x: add `ethtool -w' support. This revises and enhances the bnx2x register dump facilities, adding support for `ethtool -w' on top of `ethtool -d'. Signed-off-by: Miriam Shitrit Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index cab91da..309bbb7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1704,6 +1704,7 @@ struct bnx2x { /* priority to cos mapping */ u8 prio_to_cos[8]; + u32 dump_preset_idx; }; /* Tx queues may be less or equal to Rx queues */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 6667ec5..a2583f2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -197,6 +197,7 @@ void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, /* Disable transactions from chip to host */ void bnx2x_pf_disable(struct bnx2x *bp); +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val); /** * bnx2x__link_status_update - handles link status change. diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h index b926f58..bff5e33 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h @@ -1,6 +1,6 @@ /* bnx2x_dump.h: Broadcom Everest network driver. * - * Copyright (c) 2012 Broadcom Corporation + * Copyright (c) 2012-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -22,120 +22,37 @@ #ifndef BNX2X_DUMP_H #define BNX2X_DUMP_H +/* WaitP Definitions */ +#define DRV_DUMP_XSTORM_WAITP_ADDRESS 0x2b8a80 +#define DRV_DUMP_TSTORM_WAITP_ADDRESS 0x1b8a80 +#define DRV_DUMP_USTORM_WAITP_ADDRESS 0x338a80 +#define DRV_DUMP_CSTORM_WAITP_ADDRESS 0x238a80 -/*definitions */ -#define XSTORM_WAITP_ADDR 0x2b8a80 -#define TSTORM_WAITP_ADDR 0x1b8a80 -#define USTORM_WAITP_ADDR 0x338a80 -#define CSTORM_WAITP_ADDR 0x238a80 -#define TSTORM_CAM_MODE 0x1B1440 +/* Possible Chips */ +#define DUMP_CHIP_E1 1 +#define DUMP_CHIP_E1H 2 +#define DUMP_CHIP_E2 4 +#define DUMP_CHIP_E3A0 8 +#define DUMP_CHIP_E3B0 16 +#define DUMP_PATH_0 512 +#define DUMP_PATH_1 1024 +#define NUM_PRESETS 13 +#define NUM_CHIPS 5 -#define MAX_TIMER_PENDING 200 -#define TIMER_SCAN_DONT_CARE 0xFF -#define RI_E1 0x1 -#define RI_E1H 0x2 -#define RI_E2 0x4 -#define RI_E3 0x8 -#define RI_E3B0 0x10 -#define RI_ONLINE 0x100 -#define RI_OFFLINE 0x0 -#define RI_PATH0_DUMP 0x200 -#define RI_PATH1_DUMP 0x400 - -#define RI_E1_ONLINE (RI_E1 | RI_ONLINE) -#define RI_E1H_ONLINE (RI_E1H | RI_ONLINE) -#define RI_E1E1H_ONLINE (RI_E1 | RI_E1H | RI_ONLINE) -#define RI_E2_ONLINE (RI_E2 | RI_ONLINE) -#define RI_E1E2_ONLINE (RI_E1 | RI_E2 | RI_ONLINE) -#define RI_E1HE2_ONLINE (RI_E1H | RI_E2 | RI_ONLINE) -#define RI_E1E1HE2_ONLINE (RI_E1 | RI_E1H | RI_E2 | RI_ONLINE) -#define RI_E3_ONLINE (RI_E3 | RI_ONLINE) -#define RI_E1E3_ONLINE (RI_E1 | RI_E3 | RI_ONLINE) -#define RI_E1HE3_ONLINE (RI_E1H | RI_E3 | RI_ONLINE) -#define RI_E1E1HE3_ONLINE (RI_E1 | RI_E1H | RI_E3 | RI_ONLINE) -#define RI_E2E3_ONLINE (RI_E2 | RI_E3 | RI_ONLINE) -#define RI_E1E2E3_ONLINE (RI_E1 | RI_E2 | RI_E3 | RI_ONLINE) -#define RI_E1HE2E3_ONLINE (RI_E1H | RI_E2 | RI_E3 | RI_ONLINE) -#define RI_E1E1HE2E3_ONLINE (RI_E1 | RI_E1H | RI_E2 | RI_E3 | RI_ONLINE) -#define RI_E3B0_ONLINE (RI_E3B0 | RI_ONLINE) -#define RI_E1E3B0_ONLINE (RI_E1 | RI_E3B0 | RI_ONLINE) -#define RI_E1HE3B0_ONLINE (RI_E1H | RI_E3B0 | RI_ONLINE) -#define RI_E1E1HE3B0_ONLINE (RI_E1 | RI_E1H | RI_E3B0 | RI_ONLINE) -#define RI_E2E3B0_ONLINE (RI_E2 | RI_E3B0 | RI_ONLINE) -#define RI_E1E2E3B0_ONLINE (RI_E1 | RI_E2 | RI_E3B0 | RI_ONLINE) -#define RI_E1HE2E3B0_ONLINE (RI_E1H | RI_E2 | RI_E3B0 | RI_ONLINE) -#define RI_E1E1HE2E3B0_ONLINE (RI_E1 | RI_E1H | RI_E2 | RI_E3B0 | RI_ONLINE) -#define RI_E3E3B0_ONLINE (RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1E3E3B0_ONLINE (RI_E1 | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1HE3E3B0_ONLINE (RI_E1H | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1E1HE3E3B0_ONLINE (RI_E1 | RI_E1H | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E2E3E3B0_ONLINE (RI_E2 | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1E2E3E3B0_ONLINE (RI_E1 | RI_E2 | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1HE2E3E3B0_ONLINE (RI_E1H | RI_E2 | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1E1HE2E3E3B0_ONLINE \ - (RI_E1 | RI_E1H | RI_E2 | RI_E3 | RI_E3B0 | RI_ONLINE) -#define RI_E1_OFFLINE (RI_E1 | RI_OFFLINE) -#define RI_E1H_OFFLINE (RI_E1H | RI_OFFLINE) -#define RI_E1E1H_OFFLINE (RI_E1 | RI_E1H | RI_OFFLINE) -#define RI_E2_OFFLINE (RI_E2 | RI_OFFLINE) -#define RI_E1E2_OFFLINE (RI_E1 | RI_E2 | RI_OFFLINE) -#define RI_E1HE2_OFFLINE (RI_E1H | RI_E2 | RI_OFFLINE) -#define RI_E1E1HE2_OFFLINE (RI_E1 | RI_E1H | RI_E2 | RI_OFFLINE) -#define RI_E3_OFFLINE (RI_E3 | RI_OFFLINE) -#define RI_E1E3_OFFLINE (RI_E1 | RI_E3 | RI_OFFLINE) -#define RI_E1HE3_OFFLINE (RI_E1H | RI_E3 | RI_OFFLINE) -#define RI_E1E1HE3_OFFLINE (RI_E1 | RI_E1H | RI_E3 | RI_OFFLINE) -#define RI_E2E3_OFFLINE (RI_E2 | RI_E3 | RI_OFFLINE) -#define RI_E1E2E3_OFFLINE (RI_E1 | RI_E2 | RI_E3 | RI_OFFLINE) -#define RI_E1HE2E3_OFFLINE (RI_E1H | RI_E2 | RI_E3 | RI_OFFLINE) -#define RI_E1E1HE2E3_OFFLINE (RI_E1 | RI_E1H | RI_E2 | RI_E3 | RI_OFFLINE) -#define RI_E3B0_OFFLINE (RI_E3B0 | RI_OFFLINE) -#define RI_E1E3B0_OFFLINE (RI_E1 | RI_E3B0 | RI_OFFLINE) -#define RI_E1HE3B0_OFFLINE (RI_E1H | RI_E3B0 | RI_OFFLINE) -#define RI_E1E1HE3B0_OFFLINE (RI_E1 | RI_E1H | RI_E3B0 | RI_OFFLINE) -#define RI_E2E3B0_OFFLINE (RI_E2 | RI_E3B0 | RI_OFFLINE) -#define RI_E1E2E3B0_OFFLINE (RI_E1 | RI_E2 | RI_E3B0 | RI_OFFLINE) -#define RI_E1HE2E3B0_OFFLINE (RI_E1H | RI_E2 | RI_E3B0 | RI_OFFLINE) -#define RI_E1E1HE2E3B0_OFFLINE (RI_E1 | RI_E1H | RI_E2 | RI_E3B0 | RI_OFFLINE) -#define RI_E3E3B0_OFFLINE (RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E1E3E3B0_OFFLINE (RI_E1 | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E1HE3E3B0_OFFLINE (RI_E1H | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E1E1HE3E3B0_OFFLINE (RI_E1 | RI_E1H | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E2E3E3B0_OFFLINE (RI_E2 | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E1E2E3E3B0_OFFLINE (RI_E1 | RI_E2 | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E1HE2E3E3B0_OFFLINE (RI_E1H | RI_E2 | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_E1E1HE2E3E3B0_OFFLINE \ - (RI_E1 | RI_E1H | RI_E2 | RI_E3 | RI_E3B0 | RI_OFFLINE) -#define RI_ALL_ONLINE RI_E1E1HE2E3E3B0_ONLINE -#define RI_ALL_OFFLINE RI_E1E1HE2E3E3B0_OFFLINE - -#define DBG_DMP_TRACE_BUFFER_SIZE 0x800 -#define DBG_DMP_TRACE_BUFFER_OFFSET(shmem0_offset) \ - ((shmem0_offset) - DBG_DMP_TRACE_BUFFER_SIZE) - -struct dump_sign { - u32 time_stamp; - u32 diag_ver; - u32 grc_dump_ver; -}; - -struct dump_hdr { - u32 hdr_size; /* in dwords, excluding this field */ - struct dump_sign dump_sign; - u32 xstorm_waitp; - u32 tstorm_waitp; - u32 ustorm_waitp; - u32 cstorm_waitp; - u16 info; - u8 idle_chk; - u8 reserved; +struct dump_header { + u32 header_size; /* Size in DWORDs excluding this field */ + u32 version; + u32 preset; + u32 dump_meta_data; /* OR of CHIP and PATH. */ }; +#define BNX2X_DUMP_VERSION 0x50acff01 struct reg_addr { u32 addr; u32 size; - u16 info; + u32 chips; + u32 presets; }; struct wreg_addr { @@ -143,1005 +60,2168 @@ struct wreg_addr { u32 size; u32 read_regs_count; const u32 *read_regs; - u16 info; + u32 chips; + u32 presets; +}; + +#define PAGE_MODE_VALUES_E2 2 +#define PAGE_READ_REGS_E2 1 +#define PAGE_WRITE_REGS_E2 1 +static const u32 page_vals_e2[] = {0, 128}; +static const u32 page_write_regs_e2[] = {328476}; +static const struct reg_addr page_read_regs_e2[] = { + {0x58000, 4608, DUMP_CHIP_E2, 0x30} +}; + +#define PAGE_MODE_VALUES_E3 2 +#define PAGE_READ_REGS_E3 1 +#define PAGE_WRITE_REGS_E3 1 +static const u32 page_vals_e3[] = {0, 128}; +static const u32 page_write_regs_e3[] = {328476}; +static const struct reg_addr page_read_regs_e3[] = { + {0x58000, 4608, DUMP_CHIP_E3A0 | DUMP_CHIP_E3B0, 0x30} }; static const struct reg_addr reg_addrs[] = { - { 0x2000, 341, RI_ALL_ONLINE }, - { 0x2800, 103, RI_ALL_ONLINE }, - { 0x3000, 287, RI_ALL_ONLINE }, - { 0x3800, 331, RI_ALL_ONLINE }, - { 0x8800, 6, RI_ALL_ONLINE }, - { 0x8818, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x9000, 147, RI_E2E3E3B0_ONLINE }, - { 0x924c, 1, RI_E2_ONLINE }, - { 0x9250, 16, RI_E2E3E3B0_ONLINE }, - { 0x9400, 33, RI_E2E3E3B0_ONLINE }, - { 0x9484, 5, RI_E3E3B0_ONLINE }, - { 0xa000, 27, RI_ALL_ONLINE }, - { 0xa06c, 1, RI_E1E1H_ONLINE }, - { 0xa070, 71, RI_ALL_ONLINE }, - { 0xa18c, 4, RI_E1E1H_ONLINE }, - { 0xa19c, 62, RI_ALL_ONLINE }, - { 0xa294, 2, RI_E1E1H_ONLINE }, - { 0xa29c, 2, RI_ALL_ONLINE }, - { 0xa2a4, 2, RI_E1E1HE2_ONLINE }, - { 0xa2ac, 52, RI_ALL_ONLINE }, - { 0xa39c, 7, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3b8, 2, RI_E3E3B0_ONLINE }, - { 0xa3c0, 3, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3d0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3d8, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3e0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3e8, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3f0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa3f8, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa400, 40, RI_ALL_ONLINE }, - { 0xa4a0, 1, RI_E1E1HE2_ONLINE }, - { 0xa4a4, 2, RI_ALL_ONLINE }, - { 0xa4ac, 2, RI_E1E1H_ONLINE }, - { 0xa4b4, 1, RI_E1E1HE2_ONLINE }, - { 0xa4b8, 2, RI_E1E1H_ONLINE }, - { 0xa4c0, 3, RI_ALL_ONLINE }, - { 0xa4cc, 5, RI_E1E1H_ONLINE }, - { 0xa4e0, 3, RI_ALL_ONLINE }, - { 0xa4fc, 2, RI_ALL_ONLINE }, - { 0xa504, 1, RI_E1E1H_ONLINE }, - { 0xa508, 3, RI_ALL_ONLINE }, - { 0xa518, 1, RI_ALL_ONLINE }, - { 0xa520, 1, RI_ALL_ONLINE }, - { 0xa528, 1, RI_ALL_ONLINE }, - { 0xa530, 1, RI_ALL_ONLINE }, - { 0xa538, 1, RI_ALL_ONLINE }, - { 0xa540, 1, RI_ALL_ONLINE }, - { 0xa548, 1, RI_E1E1H_ONLINE }, - { 0xa550, 1, RI_E1E1H_ONLINE }, - { 0xa558, 1, RI_E1E1H_ONLINE }, - { 0xa560, 1, RI_E1E1H_ONLINE }, - { 0xa568, 1, RI_E1E1H_ONLINE }, - { 0xa570, 1, RI_ALL_ONLINE }, - { 0xa580, 1, RI_ALL_ONLINE }, - { 0xa590, 1, RI_ALL_ONLINE }, - { 0xa5a0, 1, RI_E1E1HE2_ONLINE }, - { 0xa5c0, 1, RI_ALL_ONLINE }, - { 0xa5e0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa5e8, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa5f0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0xa5f8, 1, RI_E1HE2_ONLINE }, - { 0xa5fc, 9, RI_E1HE2E3E3B0_ONLINE }, - { 0xa620, 6, RI_E2E3E3B0_ONLINE }, - { 0xa638, 20, RI_E2_ONLINE }, - { 0xa688, 42, RI_E2E3E3B0_ONLINE }, - { 0xa730, 1, RI_E2_ONLINE }, - { 0xa734, 2, RI_E2E3E3B0_ONLINE }, - { 0xa73c, 4, RI_E2_ONLINE }, - { 0xa74c, 5, RI_E2E3E3B0_ONLINE }, - { 0xa760, 5, RI_E2_ONLINE }, - { 0xa774, 7, RI_E2E3E3B0_ONLINE }, - { 0xa790, 15, RI_E2_ONLINE }, - { 0xa7cc, 4, RI_E2E3E3B0_ONLINE }, - { 0xa7e0, 6, RI_E3E3B0_ONLINE }, - { 0xa800, 18, RI_E2_ONLINE }, - { 0xa848, 33, RI_E2E3E3B0_ONLINE }, - { 0xa8cc, 2, RI_E3E3B0_ONLINE }, - { 0xa8d4, 4, RI_E2E3E3B0_ONLINE }, - { 0xa8e4, 1, RI_E3E3B0_ONLINE }, - { 0xa8e8, 1, RI_E2E3E3B0_ONLINE }, - { 0xa8f0, 1, RI_E2E3E3B0_ONLINE }, - { 0xa8f8, 30, RI_E3E3B0_ONLINE }, - { 0xa974, 73, RI_E3E3B0_ONLINE }, - { 0xac30, 1, RI_E3E3B0_ONLINE }, - { 0xac40, 1, RI_E3E3B0_ONLINE }, - { 0xac50, 1, RI_E3E3B0_ONLINE }, - { 0xac60, 1, RI_E3B0_ONLINE }, - { 0x10000, 9, RI_ALL_ONLINE }, - { 0x10024, 1, RI_E1E1HE2_ONLINE }, - { 0x10028, 5, RI_ALL_ONLINE }, - { 0x1003c, 6, RI_E1E1HE2_ONLINE }, - { 0x10054, 20, RI_ALL_ONLINE }, - { 0x100a4, 4, RI_E1E1HE2_ONLINE }, - { 0x100b4, 11, RI_ALL_ONLINE }, - { 0x100e0, 4, RI_E1E1HE2_ONLINE }, - { 0x100f0, 8, RI_ALL_ONLINE }, - { 0x10110, 6, RI_E1E1HE2_ONLINE }, - { 0x10128, 110, RI_ALL_ONLINE }, - { 0x102e0, 4, RI_E1E1HE2_ONLINE }, - { 0x102f0, 18, RI_ALL_ONLINE }, - { 0x10338, 20, RI_E1E1HE2_ONLINE }, - { 0x10388, 10, RI_ALL_ONLINE }, - { 0x10400, 6, RI_E1E1HE2_ONLINE }, - { 0x10418, 6, RI_ALL_ONLINE }, - { 0x10430, 10, RI_E1E1HE2_ONLINE }, - { 0x10458, 22, RI_ALL_ONLINE }, - { 0x104b0, 12, RI_E1E1HE2_ONLINE }, - { 0x104e0, 1, RI_ALL_ONLINE }, - { 0x104e8, 2, RI_ALL_ONLINE }, - { 0x104f4, 2, RI_ALL_ONLINE }, - { 0x10500, 146, RI_ALL_ONLINE }, - { 0x10750, 2, RI_E1E1HE2_ONLINE }, - { 0x10760, 2, RI_E1E1HE2_ONLINE }, - { 0x10770, 2, RI_E1E1HE2_ONLINE }, - { 0x10780, 2, RI_E1E1HE2_ONLINE }, - { 0x10790, 2, RI_ALL_ONLINE }, - { 0x107a0, 2, RI_E1E1HE2_ONLINE }, - { 0x107b0, 2, RI_E1E1HE2_ONLINE }, - { 0x107c0, 2, RI_E1E1HE2_ONLINE }, - { 0x107d0, 2, RI_E1E1HE2_ONLINE }, - { 0x107e0, 2, RI_ALL_ONLINE }, - { 0x10880, 2, RI_ALL_ONLINE }, - { 0x10900, 2, RI_ALL_ONLINE }, - { 0x16000, 1, RI_E1HE2_ONLINE }, - { 0x16004, 25, RI_E1HE2E3E3B0_ONLINE }, - { 0x16070, 8, RI_E1HE2E3E3B0_ONLINE }, - { 0x16090, 4, RI_E1HE2E3_ONLINE }, - { 0x160a0, 6, RI_E1HE2E3E3B0_ONLINE }, - { 0x160c0, 7, RI_E1HE2E3E3B0_ONLINE }, - { 0x160dc, 2, RI_E1HE2_ONLINE }, - { 0x160e4, 10, RI_E1HE2E3E3B0_ONLINE }, - { 0x1610c, 2, RI_E1HE2_ONLINE }, - { 0x16114, 6, RI_E1HE2E3E3B0_ONLINE }, - { 0x16140, 48, RI_E1HE2E3E3B0_ONLINE }, - { 0x16204, 5, RI_E1HE2E3E3B0_ONLINE }, - { 0x18000, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x18008, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x18010, 35, RI_E2E3E3B0_ONLINE }, - { 0x180a4, 2, RI_E2E3E3B0_ONLINE }, - { 0x180c0, 9, RI_E2E3E3B0_ONLINE }, - { 0x180e4, 1, RI_E2E3_ONLINE }, - { 0x180e8, 2, RI_E2E3E3B0_ONLINE }, - { 0x180f0, 1, RI_E2E3_ONLINE }, - { 0x180f4, 79, RI_E2E3E3B0_ONLINE }, - { 0x18230, 1, RI_E2E3_ONLINE }, - { 0x18234, 2, RI_E2E3E3B0_ONLINE }, - { 0x1823c, 1, RI_E2E3_ONLINE }, - { 0x18240, 13, RI_E2E3E3B0_ONLINE }, - { 0x18274, 1, RI_E2_ONLINE }, - { 0x18278, 81, RI_E2E3E3B0_ONLINE }, - { 0x18440, 63, RI_E2E3E3B0_ONLINE }, - { 0x18570, 42, RI_E3E3B0_ONLINE }, - { 0x18618, 25, RI_E3B0_ONLINE }, - { 0x18680, 44, RI_E3B0_ONLINE }, - { 0x18748, 12, RI_E3B0_ONLINE }, - { 0x18788, 1, RI_E3B0_ONLINE }, - { 0x1879c, 6, RI_E3B0_ONLINE }, - { 0x187c4, 51, RI_E3B0_ONLINE }, - { 0x18a00, 48, RI_E3B0_ONLINE }, - { 0x20000, 24, RI_ALL_ONLINE }, - { 0x20060, 8, RI_ALL_ONLINE }, - { 0x20080, 94, RI_ALL_ONLINE }, - { 0x201f8, 1, RI_E1E1H_ONLINE }, - { 0x201fc, 1, RI_ALL_ONLINE }, - { 0x20200, 1, RI_E1E1H_ONLINE }, - { 0x20204, 1, RI_ALL_ONLINE }, - { 0x20208, 1, RI_E1E1H_ONLINE }, - { 0x2020c, 39, RI_ALL_ONLINE }, - { 0x202c8, 1, RI_E2E3E3B0_ONLINE }, - { 0x202d8, 4, RI_E2E3E3B0_ONLINE }, - { 0x202f0, 1, RI_E3B0_ONLINE }, - { 0x20400, 2, RI_ALL_ONLINE }, - { 0x2040c, 8, RI_ALL_ONLINE }, - { 0x2042c, 18, RI_E1HE2E3E3B0_ONLINE }, - { 0x20480, 1, RI_ALL_ONLINE }, - { 0x20500, 1, RI_ALL_ONLINE }, - { 0x20600, 1, RI_ALL_ONLINE }, - { 0x28000, 1, RI_ALL_ONLINE }, - { 0x28004, 8191, RI_ALL_OFFLINE }, - { 0x30000, 1, RI_ALL_ONLINE }, - { 0x30004, 16383, RI_ALL_OFFLINE }, - { 0x40000, 98, RI_ALL_ONLINE }, - { 0x401a8, 8, RI_E1HE2E3E3B0_ONLINE }, - { 0x401c8, 1, RI_E1H_ONLINE }, - { 0x401cc, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x401d4, 2, RI_E2E3E3B0_ONLINE }, - { 0x40200, 4, RI_ALL_ONLINE }, - { 0x40220, 6, RI_E2E3E3B0_ONLINE }, - { 0x40238, 8, RI_E2E3_ONLINE }, - { 0x40258, 4, RI_E2E3E3B0_ONLINE }, - { 0x40268, 2, RI_E3E3B0_ONLINE }, - { 0x40270, 17, RI_E3B0_ONLINE }, - { 0x40400, 43, RI_ALL_ONLINE }, - { 0x404cc, 3, RI_E1HE2E3E3B0_ONLINE }, - { 0x404e0, 1, RI_E2E3E3B0_ONLINE }, - { 0x40500, 2, RI_ALL_ONLINE }, - { 0x40510, 2, RI_ALL_ONLINE }, - { 0x40520, 2, RI_ALL_ONLINE }, - { 0x40530, 2, RI_ALL_ONLINE }, - { 0x40540, 2, RI_ALL_ONLINE }, - { 0x40550, 10, RI_E2E3E3B0_ONLINE }, - { 0x40610, 2, RI_E2E3E3B0_ONLINE }, - { 0x42000, 164, RI_ALL_ONLINE }, - { 0x422c0, 4, RI_E2E3E3B0_ONLINE }, - { 0x422d4, 5, RI_E1HE2E3E3B0_ONLINE }, - { 0x422e8, 1, RI_E2E3E3B0_ONLINE }, - { 0x42400, 49, RI_ALL_ONLINE }, - { 0x424c8, 38, RI_ALL_ONLINE }, - { 0x42568, 2, RI_ALL_ONLINE }, - { 0x42640, 5, RI_E2E3E3B0_ONLINE }, - { 0x42800, 1, RI_ALL_ONLINE }, - { 0x50000, 1, RI_ALL_ONLINE }, - { 0x50004, 19, RI_ALL_ONLINE }, - { 0x50050, 8, RI_ALL_ONLINE }, - { 0x50070, 88, RI_ALL_ONLINE }, - { 0x501f0, 4, RI_E1HE2E3E3B0_ONLINE }, - { 0x50200, 2, RI_ALL_ONLINE }, - { 0x5020c, 7, RI_ALL_ONLINE }, - { 0x50228, 6, RI_E1HE2E3E3B0_ONLINE }, - { 0x50240, 1, RI_ALL_ONLINE }, - { 0x50280, 1, RI_ALL_ONLINE }, - { 0x50300, 1, RI_E2E3E3B0_ONLINE }, - { 0x5030c, 1, RI_E2E3E3B0_ONLINE }, - { 0x50318, 1, RI_E2E3E3B0_ONLINE }, - { 0x5031c, 1, RI_E2E3E3B0_ONLINE }, - { 0x50320, 2, RI_E2E3E3B0_ONLINE }, - { 0x50330, 1, RI_E3B0_ONLINE }, - { 0x52000, 1, RI_ALL_ONLINE }, - { 0x54000, 1, RI_ALL_ONLINE }, - { 0x54004, 3327, RI_ALL_OFFLINE }, - { 0x58000, 1, RI_ALL_ONLINE }, - { 0x58004, 8191, RI_E1E1H_OFFLINE }, - { 0x60000, 26, RI_ALL_ONLINE }, - { 0x60068, 8, RI_E1E1H_ONLINE }, - { 0x60088, 12, RI_ALL_ONLINE }, - { 0x600b8, 9, RI_E1E1H_ONLINE }, - { 0x600dc, 1, RI_ALL_ONLINE }, - { 0x600e0, 5, RI_E1E1H_ONLINE }, - { 0x600f4, 1, RI_E1E1HE2_ONLINE }, - { 0x600f8, 1, RI_E1E1H_ONLINE }, - { 0x600fc, 8, RI_ALL_ONLINE }, - { 0x6013c, 24, RI_E1H_ONLINE }, - { 0x6019c, 2, RI_E2E3E3B0_ONLINE }, - { 0x601ac, 18, RI_E2E3E3B0_ONLINE }, - { 0x60200, 1, RI_ALL_ONLINE }, - { 0x60204, 2, RI_ALL_OFFLINE }, - { 0x60210, 13, RI_E2E3E3B0_ONLINE }, - { 0x60244, 16, RI_E3B0_ONLINE }, - { 0x61000, 1, RI_ALL_ONLINE }, - { 0x61004, 511, RI_ALL_OFFLINE }, - { 0x61800, 512, RI_E3E3B0_OFFLINE }, - { 0x70000, 8, RI_ALL_ONLINE }, - { 0x70020, 8184, RI_ALL_OFFLINE }, - { 0x78000, 8192, RI_E3E3B0_OFFLINE }, - { 0x85000, 3, RI_ALL_OFFLINE }, - { 0x8501c, 7, RI_ALL_OFFLINE }, - { 0x85048, 1, RI_ALL_OFFLINE }, - { 0x85200, 32, RI_ALL_OFFLINE }, - { 0xb0000, 16384, RI_E1H_OFFLINE }, - { 0xc1000, 7, RI_ALL_ONLINE }, - { 0xc103c, 2, RI_E2E3E3B0_ONLINE }, - { 0xc1800, 2, RI_ALL_ONLINE }, - { 0xc2000, 164, RI_ALL_ONLINE }, - { 0xc22c0, 5, RI_E2E3E3B0_ONLINE }, - { 0xc22d8, 4, RI_E2E3E3B0_ONLINE }, - { 0xc2400, 49, RI_ALL_ONLINE }, - { 0xc24c8, 38, RI_ALL_ONLINE }, - { 0xc2568, 2, RI_ALL_ONLINE }, - { 0xc2600, 1, RI_ALL_ONLINE }, - { 0xc4000, 165, RI_ALL_ONLINE }, - { 0xc42d8, 2, RI_E2E3E3B0_ONLINE }, - { 0xc42e0, 7, RI_E1HE2E3E3B0_ONLINE }, - { 0xc42fc, 1, RI_E2E3E3B0_ONLINE }, - { 0xc4400, 51, RI_ALL_ONLINE }, - { 0xc44d0, 38, RI_ALL_ONLINE }, - { 0xc4570, 2, RI_ALL_ONLINE }, - { 0xc4578, 5, RI_E2E3E3B0_ONLINE }, - { 0xc4600, 1, RI_ALL_ONLINE }, - { 0xd0000, 19, RI_ALL_ONLINE }, - { 0xd004c, 8, RI_ALL_ONLINE }, - { 0xd006c, 91, RI_ALL_ONLINE }, - { 0xd01fc, 1, RI_E2E3E3B0_ONLINE }, - { 0xd0200, 2, RI_ALL_ONLINE }, - { 0xd020c, 7, RI_ALL_ONLINE }, - { 0xd0228, 18, RI_E1HE2E3E3B0_ONLINE }, - { 0xd0280, 1, RI_ALL_ONLINE }, - { 0xd0300, 1, RI_ALL_ONLINE }, - { 0xd0400, 1, RI_ALL_ONLINE }, - { 0xd0818, 1, RI_E3B0_ONLINE }, - { 0xd4000, 1, RI_ALL_ONLINE }, - { 0xd4004, 2559, RI_ALL_OFFLINE }, - { 0xd8000, 1, RI_ALL_ONLINE }, - { 0xd8004, 8191, RI_ALL_OFFLINE }, - { 0xe0000, 21, RI_ALL_ONLINE }, - { 0xe0054, 8, RI_ALL_ONLINE }, - { 0xe0074, 49, RI_ALL_ONLINE }, - { 0xe0138, 1, RI_E1E1H_ONLINE }, - { 0xe013c, 35, RI_ALL_ONLINE }, - { 0xe01f4, 1, RI_E2_ONLINE }, - { 0xe01f8, 1, RI_E2E3E3B0_ONLINE }, - { 0xe0200, 2, RI_ALL_ONLINE }, - { 0xe020c, 8, RI_ALL_ONLINE }, - { 0xe022c, 18, RI_E1HE2E3E3B0_ONLINE }, - { 0xe0280, 1, RI_ALL_ONLINE }, - { 0xe0300, 1, RI_ALL_ONLINE }, - { 0xe0400, 1, RI_E3B0_ONLINE }, - { 0xe1000, 1, RI_ALL_ONLINE }, - { 0xe2000, 1, RI_ALL_ONLINE }, - { 0xe2004, 2047, RI_ALL_OFFLINE }, - { 0xf0000, 1, RI_ALL_ONLINE }, - { 0xf0004, 16383, RI_ALL_OFFLINE }, - { 0x101000, 12, RI_ALL_ONLINE }, - { 0x101050, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x101054, 3, RI_E2E3E3B0_ONLINE }, - { 0x101100, 1, RI_ALL_ONLINE }, - { 0x101800, 8, RI_ALL_ONLINE }, - { 0x102000, 18, RI_ALL_ONLINE }, - { 0x102068, 6, RI_E2E3E3B0_ONLINE }, - { 0x102080, 17, RI_ALL_ONLINE }, - { 0x1020c8, 8, RI_E1H_ONLINE }, - { 0x1020e8, 9, RI_E2E3E3B0_ONLINE }, - { 0x102400, 1, RI_ALL_ONLINE }, - { 0x103000, 26, RI_ALL_ONLINE }, - { 0x103098, 5, RI_E1HE2E3E3B0_ONLINE }, - { 0x1030ac, 2, RI_E2E3E3B0_ONLINE }, - { 0x1030b4, 1, RI_E2_ONLINE }, - { 0x1030b8, 7, RI_E2E3E3B0_ONLINE }, - { 0x1030d8, 8, RI_E2E3E3B0_ONLINE }, - { 0x103400, 1, RI_E2E3E3B0_ONLINE }, - { 0x103404, 135, RI_E2E3E3B0_OFFLINE }, - { 0x103800, 8, RI_ALL_ONLINE }, - { 0x104000, 63, RI_ALL_ONLINE }, - { 0x10411c, 16, RI_E2E3E3B0_ONLINE }, - { 0x104200, 17, RI_ALL_ONLINE }, - { 0x104400, 64, RI_ALL_ONLINE }, - { 0x104500, 192, RI_ALL_OFFLINE }, - { 0x104800, 64, RI_ALL_ONLINE }, - { 0x104900, 192, RI_ALL_OFFLINE }, - { 0x105000, 256, RI_ALL_ONLINE }, - { 0x105400, 768, RI_ALL_OFFLINE }, - { 0x107000, 7, RI_E2E3E3B0_ONLINE }, - { 0x10701c, 1, RI_E3E3B0_ONLINE }, - { 0x108000, 33, RI_E1E1H_ONLINE }, - { 0x1080ac, 5, RI_E1H_ONLINE }, - { 0x108100, 5, RI_E1E1H_ONLINE }, - { 0x108120, 5, RI_E1E1H_ONLINE }, - { 0x108200, 74, RI_E1E1H_ONLINE }, - { 0x108400, 74, RI_E1E1H_ONLINE }, - { 0x108800, 152, RI_E1E1H_ONLINE }, - { 0x110000, 111, RI_E2E3E3B0_ONLINE }, - { 0x1101dc, 1, RI_E3E3B0_ONLINE }, - { 0x110200, 4, RI_E2E3E3B0_ONLINE }, - { 0x120000, 2, RI_ALL_ONLINE }, - { 0x120008, 4, RI_ALL_ONLINE }, - { 0x120018, 3, RI_ALL_ONLINE }, - { 0x120024, 4, RI_ALL_ONLINE }, - { 0x120034, 3, RI_ALL_ONLINE }, - { 0x120040, 4, RI_ALL_ONLINE }, - { 0x120050, 3, RI_ALL_ONLINE }, - { 0x12005c, 4, RI_ALL_ONLINE }, - { 0x12006c, 3, RI_ALL_ONLINE }, - { 0x120078, 4, RI_ALL_ONLINE }, - { 0x120088, 3, RI_ALL_ONLINE }, - { 0x120094, 4, RI_ALL_ONLINE }, - { 0x1200a4, 3, RI_ALL_ONLINE }, - { 0x1200b0, 4, RI_ALL_ONLINE }, - { 0x1200c0, 3, RI_ALL_ONLINE }, - { 0x1200cc, 4, RI_ALL_ONLINE }, - { 0x1200dc, 3, RI_ALL_ONLINE }, - { 0x1200e8, 4, RI_ALL_ONLINE }, - { 0x1200f8, 3, RI_ALL_ONLINE }, - { 0x120104, 4, RI_ALL_ONLINE }, - { 0x120114, 1, RI_ALL_ONLINE }, - { 0x120118, 22, RI_ALL_ONLINE }, - { 0x120170, 2, RI_E1E1H_ONLINE }, - { 0x120178, 243, RI_ALL_ONLINE }, - { 0x120544, 4, RI_E1E1H_ONLINE }, - { 0x120554, 6, RI_ALL_ONLINE }, - { 0x12059c, 6, RI_E1HE2E3E3B0_ONLINE }, - { 0x1205b4, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1205b8, 15, RI_E1HE2E3E3B0_ONLINE }, - { 0x1205f4, 1, RI_E1HE2_ONLINE }, - { 0x1205f8, 4, RI_E2E3E3B0_ONLINE }, - { 0x120618, 1, RI_E2E3E3B0_ONLINE }, - { 0x12061c, 20, RI_E1HE2E3E3B0_ONLINE }, - { 0x12066c, 11, RI_E1HE2E3E3B0_ONLINE }, - { 0x120698, 3, RI_E2E3E3B0_ONLINE }, - { 0x1206a4, 1, RI_E2_ONLINE }, - { 0x1206a8, 1, RI_E2E3E3B0_ONLINE }, - { 0x1206b0, 75, RI_E2E3E3B0_ONLINE }, - { 0x1207dc, 1, RI_E2_ONLINE }, - { 0x1207fc, 1, RI_E2E3E3B0_ONLINE }, - { 0x12080c, 65, RI_ALL_ONLINE }, - { 0x120910, 7, RI_E2E3E3B0_ONLINE }, - { 0x120930, 9, RI_E2E3E3B0_ONLINE }, - { 0x12095c, 37, RI_E3E3B0_ONLINE }, - { 0x120a00, 2, RI_E1E1HE2_ONLINE }, - { 0x120b00, 1, RI_E3E3B0_ONLINE }, - { 0x122000, 2, RI_ALL_ONLINE }, - { 0x122008, 2046, RI_E1_OFFLINE }, - { 0x128000, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x128008, 6142, RI_E1HE2E3E3B0_OFFLINE }, - { 0x130000, 35, RI_E2E3E3B0_ONLINE }, - { 0x130100, 29, RI_E2E3E3B0_ONLINE }, - { 0x130180, 1, RI_E2E3E3B0_ONLINE }, - { 0x130200, 1, RI_E2E3E3B0_ONLINE }, - { 0x130280, 1, RI_E2E3E3B0_ONLINE }, - { 0x130300, 5, RI_E2E3E3B0_ONLINE }, - { 0x130380, 1, RI_E2E3E3B0_ONLINE }, - { 0x130400, 1, RI_E2E3E3B0_ONLINE }, - { 0x130480, 5, RI_E2E3E3B0_ONLINE }, - { 0x130800, 72, RI_E2E3E3B0_ONLINE }, - { 0x131000, 136, RI_E2E3E3B0_ONLINE }, - { 0x132000, 148, RI_E2E3E3B0_ONLINE }, - { 0x134000, 544, RI_E2E3E3B0_ONLINE }, - { 0x140000, 1, RI_ALL_ONLINE }, - { 0x140004, 9, RI_E1E1HE2E3_ONLINE }, - { 0x140028, 8, RI_ALL_ONLINE }, - { 0x140048, 10, RI_E1E1HE2E3_ONLINE }, - { 0x140070, 1, RI_ALL_ONLINE }, - { 0x140074, 10, RI_E1E1HE2E3_ONLINE }, - { 0x14009c, 1, RI_ALL_ONLINE }, - { 0x1400a0, 5, RI_E1E1HE2E3_ONLINE }, - { 0x1400b4, 7, RI_ALL_ONLINE }, - { 0x1400d0, 10, RI_E1E1HE2E3_ONLINE }, - { 0x1400f8, 2, RI_ALL_ONLINE }, - { 0x140100, 5, RI_E1E1H_ONLINE }, - { 0x140114, 5, RI_E1E1HE2E3_ONLINE }, - { 0x140128, 7, RI_ALL_ONLINE }, - { 0x140144, 9, RI_E1E1HE2E3_ONLINE }, - { 0x140168, 8, RI_ALL_ONLINE }, - { 0x140188, 3, RI_E1E1HE2E3_ONLINE }, - { 0x140194, 13, RI_ALL_ONLINE }, - { 0x140200, 6, RI_E1E1HE2E3_ONLINE }, - { 0x140260, 4, RI_E2E3_ONLINE }, - { 0x140280, 4, RI_E2E3_ONLINE }, - { 0x1402e0, 2, RI_E2E3_ONLINE }, - { 0x1402e8, 2, RI_E2E3E3B0_ONLINE }, - { 0x1402f0, 9, RI_E2E3_ONLINE }, - { 0x140314, 44, RI_E3B0_ONLINE }, - { 0x144000, 4, RI_E1E1H_ONLINE }, - { 0x148000, 4, RI_E1E1H_ONLINE }, - { 0x14c000, 4, RI_E1E1H_ONLINE }, - { 0x150000, 4, RI_E1E1H_ONLINE }, - { 0x154000, 4, RI_E1E1H_ONLINE }, - { 0x158000, 4, RI_E1E1H_ONLINE }, - { 0x15c000, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x15c008, 5, RI_E1H_ONLINE }, - { 0x15c020, 8, RI_E2E3E3B0_ONLINE }, - { 0x15c040, 1, RI_E2E3_ONLINE }, - { 0x15c044, 2, RI_E2E3E3B0_ONLINE }, - { 0x15c04c, 8, RI_E2E3_ONLINE }, - { 0x15c06c, 8, RI_E2E3E3B0_ONLINE }, - { 0x15c090, 13, RI_E2E3E3B0_ONLINE }, - { 0x15c0c8, 24, RI_E2E3E3B0_ONLINE }, - { 0x15c128, 2, RI_E2E3_ONLINE }, - { 0x15c130, 8, RI_E2E3E3B0_ONLINE }, - { 0x15c150, 2, RI_E3E3B0_ONLINE }, - { 0x15c158, 2, RI_E3_ONLINE }, - { 0x15c160, 149, RI_E3B0_ONLINE }, - { 0x161000, 7, RI_ALL_ONLINE }, - { 0x16103c, 2, RI_E2E3E3B0_ONLINE }, - { 0x161800, 2, RI_ALL_ONLINE }, - { 0x162000, 54, RI_E3E3B0_ONLINE }, - { 0x162200, 60, RI_E3E3B0_ONLINE }, - { 0x162400, 54, RI_E3E3B0_ONLINE }, - { 0x162600, 60, RI_E3E3B0_ONLINE }, - { 0x162800, 54, RI_E3E3B0_ONLINE }, - { 0x162a00, 60, RI_E3E3B0_ONLINE }, - { 0x162c00, 54, RI_E3E3B0_ONLINE }, - { 0x162e00, 60, RI_E3E3B0_ONLINE }, - { 0x164000, 60, RI_ALL_ONLINE }, - { 0x164110, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x164118, 15, RI_E2E3E3B0_ONLINE }, - { 0x164200, 1, RI_ALL_ONLINE }, - { 0x164208, 1, RI_ALL_ONLINE }, - { 0x164210, 1, RI_ALL_ONLINE }, - { 0x164218, 1, RI_ALL_ONLINE }, - { 0x164220, 1, RI_ALL_ONLINE }, - { 0x164228, 1, RI_ALL_ONLINE }, - { 0x164230, 1, RI_ALL_ONLINE }, - { 0x164238, 1, RI_ALL_ONLINE }, - { 0x164240, 1, RI_ALL_ONLINE }, - { 0x164248, 1, RI_ALL_ONLINE }, - { 0x164250, 1, RI_ALL_ONLINE }, - { 0x164258, 1, RI_ALL_ONLINE }, - { 0x164260, 1, RI_ALL_ONLINE }, - { 0x164270, 2, RI_ALL_ONLINE }, - { 0x164280, 2, RI_ALL_ONLINE }, - { 0x164800, 2, RI_ALL_ONLINE }, - { 0x165000, 2, RI_ALL_ONLINE }, - { 0x166000, 164, RI_ALL_ONLINE }, - { 0x1662cc, 7, RI_E2E3E3B0_ONLINE }, - { 0x166400, 49, RI_ALL_ONLINE }, - { 0x1664c8, 38, RI_ALL_ONLINE }, - { 0x166568, 2, RI_ALL_ONLINE }, - { 0x166570, 5, RI_E2E3E3B0_ONLINE }, - { 0x166800, 1, RI_ALL_ONLINE }, - { 0x168000, 137, RI_ALL_ONLINE }, - { 0x168224, 2, RI_E1E1H_ONLINE }, - { 0x16822c, 29, RI_ALL_ONLINE }, - { 0x1682a0, 12, RI_E1E1H_ONLINE }, - { 0x1682d0, 12, RI_ALL_ONLINE }, - { 0x168300, 2, RI_E1E1H_ONLINE }, - { 0x168308, 68, RI_ALL_ONLINE }, - { 0x168418, 2, RI_E1E1H_ONLINE }, - { 0x168420, 6, RI_ALL_ONLINE }, - { 0x168800, 19, RI_ALL_ONLINE }, - { 0x168900, 1, RI_ALL_ONLINE }, - { 0x168a00, 128, RI_ALL_ONLINE }, - { 0x16a000, 1, RI_ALL_ONLINE }, - { 0x16a004, 1535, RI_ALL_OFFLINE }, - { 0x16c000, 1, RI_ALL_ONLINE }, - { 0x16c004, 1535, RI_ALL_OFFLINE }, - { 0x16e000, 16, RI_E1H_ONLINE }, - { 0x16e040, 8, RI_E2E3E3B0_ONLINE }, - { 0x16e100, 1, RI_E1H_ONLINE }, - { 0x16e200, 2, RI_E1H_ONLINE }, - { 0x16e400, 161, RI_E1H_ONLINE }, - { 0x16e684, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x16e68c, 12, RI_E1H_ONLINE }, - { 0x16e6bc, 4, RI_E1HE2E3E3B0_ONLINE }, - { 0x16e6cc, 4, RI_E1H_ONLINE }, - { 0x16e6e0, 2, RI_E2E3E3B0_ONLINE }, - { 0x16e6e8, 5, RI_E2E3_ONLINE }, - { 0x16e6fc, 5, RI_E2E3E3B0_ONLINE }, - { 0x16e768, 17, RI_E2E3E3B0_ONLINE }, - { 0x16e7ac, 12, RI_E3B0_ONLINE }, - { 0x170000, 24, RI_ALL_ONLINE }, - { 0x170060, 4, RI_E1E1H_ONLINE }, - { 0x170070, 65, RI_ALL_ONLINE }, - { 0x170194, 11, RI_E2E3E3B0_ONLINE }, - { 0x1701c4, 1, RI_E2E3E3B0_ONLINE }, - { 0x1701cc, 7, RI_E2E3E3B0_ONLINE }, - { 0x1701e8, 1, RI_E3E3B0_ONLINE }, - { 0x1701ec, 1, RI_E2E3E3B0_ONLINE }, - { 0x1701f4, 1, RI_E2E3E3B0_ONLINE }, - { 0x170200, 4, RI_ALL_ONLINE }, - { 0x170214, 1, RI_ALL_ONLINE }, - { 0x170218, 77, RI_E2E3E3B0_ONLINE }, - { 0x170400, 64, RI_E2E3E3B0_ONLINE }, - { 0x178000, 1, RI_ALL_ONLINE }, - { 0x180000, 61, RI_ALL_ONLINE }, - { 0x18013c, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x180200, 58, RI_ALL_ONLINE }, - { 0x180340, 4, RI_ALL_ONLINE }, - { 0x180380, 1, RI_E2E3E3B0_ONLINE }, - { 0x180388, 1, RI_E2E3E3B0_ONLINE }, - { 0x180390, 1, RI_E2E3E3B0_ONLINE }, - { 0x180398, 1, RI_E2E3E3B0_ONLINE }, - { 0x1803a0, 5, RI_E2E3E3B0_ONLINE }, - { 0x1803b4, 2, RI_E3E3B0_ONLINE }, - { 0x180404, 255, RI_E1E1H_OFFLINE }, - { 0x181000, 4, RI_ALL_ONLINE }, - { 0x181010, 1020, RI_ALL_OFFLINE }, - { 0x182000, 4, RI_E3E3B0_ONLINE }, - { 0x1a0000, 1, RI_ALL_ONLINE }, - { 0x1a0004, 5631, RI_ALL_OFFLINE }, - { 0x1a5800, 2560, RI_E1HE2E3E3B0_OFFLINE }, - { 0x1a8000, 1, RI_ALL_ONLINE }, - { 0x1a8004, 8191, RI_E1HE2E3E3B0_OFFLINE }, - { 0x1b0000, 1, RI_ALL_ONLINE }, - { 0x1b0004, 15, RI_E1H_OFFLINE }, - { 0x1b0040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b0044, 239, RI_E1H_OFFLINE }, - { 0x1b0400, 1, RI_ALL_ONLINE }, - { 0x1b0404, 255, RI_E1H_OFFLINE }, - { 0x1b0800, 1, RI_ALL_ONLINE }, - { 0x1b0840, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b0c00, 1, RI_ALL_ONLINE }, - { 0x1b1000, 1, RI_ALL_ONLINE }, - { 0x1b1040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b1400, 1, RI_ALL_ONLINE }, - { 0x1b1440, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b1480, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b14c0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b1800, 128, RI_ALL_OFFLINE }, - { 0x1b1c00, 128, RI_ALL_OFFLINE }, - { 0x1b2000, 1, RI_ALL_ONLINE }, - { 0x1b2400, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b2404, 5631, RI_E2E3E3B0_OFFLINE }, - { 0x1b8000, 1, RI_ALL_ONLINE }, - { 0x1b8040, 1, RI_ALL_ONLINE }, - { 0x1b8080, 1, RI_ALL_ONLINE }, - { 0x1b80c0, 1, RI_ALL_ONLINE }, - { 0x1b8100, 1, RI_ALL_ONLINE }, - { 0x1b8140, 1, RI_ALL_ONLINE }, - { 0x1b8180, 1, RI_ALL_ONLINE }, - { 0x1b81c0, 1, RI_ALL_ONLINE }, - { 0x1b8200, 1, RI_ALL_ONLINE }, - { 0x1b8240, 1, RI_ALL_ONLINE }, - { 0x1b8280, 1, RI_ALL_ONLINE }, - { 0x1b82c0, 1, RI_ALL_ONLINE }, - { 0x1b8300, 1, RI_ALL_ONLINE }, - { 0x1b8340, 1, RI_ALL_ONLINE }, - { 0x1b8380, 1, RI_ALL_ONLINE }, - { 0x1b83c0, 1, RI_ALL_ONLINE }, - { 0x1b8400, 1, RI_ALL_ONLINE }, - { 0x1b8440, 1, RI_ALL_ONLINE }, - { 0x1b8480, 1, RI_ALL_ONLINE }, - { 0x1b84c0, 1, RI_ALL_ONLINE }, - { 0x1b8500, 1, RI_ALL_ONLINE }, - { 0x1b8540, 1, RI_ALL_ONLINE }, - { 0x1b8580, 1, RI_ALL_ONLINE }, - { 0x1b85c0, 19, RI_E2E3E3B0_ONLINE }, - { 0x1b8800, 1, RI_ALL_ONLINE }, - { 0x1b8840, 1, RI_ALL_ONLINE }, - { 0x1b8880, 1, RI_ALL_ONLINE }, - { 0x1b88c0, 1, RI_ALL_ONLINE }, - { 0x1b8900, 1, RI_ALL_ONLINE }, - { 0x1b8940, 1, RI_ALL_ONLINE }, - { 0x1b8980, 1, RI_ALL_ONLINE }, - { 0x1b89c0, 1, RI_ALL_ONLINE }, - { 0x1b8a00, 1, RI_ALL_ONLINE }, - { 0x1b8a40, 1, RI_ALL_ONLINE }, - { 0x1b8a80, 1, RI_ALL_ONLINE }, - { 0x1b8ac0, 1, RI_ALL_ONLINE }, - { 0x1b8b00, 1, RI_ALL_ONLINE }, - { 0x1b8b40, 1, RI_ALL_ONLINE }, - { 0x1b8b80, 1, RI_ALL_ONLINE }, - { 0x1b8bc0, 1, RI_ALL_ONLINE }, - { 0x1b8c00, 1, RI_ALL_ONLINE }, - { 0x1b8c40, 1, RI_ALL_ONLINE }, - { 0x1b8c80, 1, RI_ALL_ONLINE }, - { 0x1b8cc0, 1, RI_ALL_ONLINE }, - { 0x1b8cc4, 1, RI_E2E3E3B0_ONLINE }, - { 0x1b8d00, 1, RI_ALL_ONLINE }, - { 0x1b8d40, 1, RI_ALL_ONLINE }, - { 0x1b8d80, 1, RI_ALL_ONLINE }, - { 0x1b8dc0, 1, RI_ALL_ONLINE }, - { 0x1b8e00, 1, RI_ALL_ONLINE }, - { 0x1b8e40, 1, RI_ALL_ONLINE }, - { 0x1b8e80, 1, RI_ALL_ONLINE }, - { 0x1b8e84, 1, RI_E2E3E3B0_ONLINE }, - { 0x1b8ec0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b8f00, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b8f40, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b8f80, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b8fc0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x1b8fc4, 2, RI_E2E3E3B0_ONLINE }, - { 0x1b8fd0, 6, RI_E2E3E3B0_ONLINE }, - { 0x1b8fe8, 2, RI_E3E3B0_ONLINE }, - { 0x1b9000, 1, RI_E2E3E3B0_ONLINE }, - { 0x1b9040, 3, RI_E2E3E3B0_ONLINE }, - { 0x1b905c, 1, RI_E3E3B0_ONLINE }, - { 0x1b9064, 1, RI_E3B0_ONLINE }, - { 0x1b9080, 10, RI_E3B0_ONLINE }, - { 0x1b9400, 14, RI_E2E3E3B0_OFFLINE }, - { 0x1b943c, 19, RI_E2E3E3B0_OFFLINE }, - { 0x1b9490, 10, RI_E2E3E3B0_OFFLINE }, - { 0x1c0000, 2, RI_ALL_ONLINE }, - { 0x200000, 65, RI_ALL_ONLINE }, - { 0x20014c, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x200200, 58, RI_ALL_ONLINE }, - { 0x200340, 4, RI_ALL_ONLINE }, - { 0x200380, 1, RI_E2E3E3B0_ONLINE }, - { 0x200388, 1, RI_E2E3E3B0_ONLINE }, - { 0x200390, 1, RI_E2E3E3B0_ONLINE }, - { 0x200398, 1, RI_E2E3E3B0_ONLINE }, - { 0x2003a0, 1, RI_E2E3E3B0_ONLINE }, - { 0x2003a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x200404, 255, RI_E1E1H_OFFLINE }, - { 0x202000, 4, RI_ALL_ONLINE }, - { 0x202010, 2044, RI_ALL_OFFLINE }, - { 0x204000, 4, RI_E3E3B0_ONLINE }, - { 0x220000, 1, RI_ALL_ONLINE }, - { 0x220004, 5631, RI_ALL_OFFLINE }, - { 0x225800, 2560, RI_E1HE2E3E3B0_OFFLINE }, - { 0x228000, 1, RI_ALL_ONLINE }, - { 0x228004, 8191, RI_E1HE2E3E3B0_OFFLINE }, - { 0x230000, 1, RI_ALL_ONLINE }, - { 0x230004, 15, RI_E1H_OFFLINE }, - { 0x230040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x230044, 239, RI_E1H_OFFLINE }, - { 0x230400, 1, RI_ALL_ONLINE }, - { 0x230404, 255, RI_E1H_OFFLINE }, - { 0x230800, 1, RI_ALL_ONLINE }, - { 0x230840, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x230c00, 1, RI_ALL_ONLINE }, - { 0x231000, 1, RI_ALL_ONLINE }, - { 0x231040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x231400, 1, RI_ALL_ONLINE }, - { 0x231440, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x231480, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2314c0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x231800, 128, RI_ALL_OFFLINE }, - { 0x231c00, 128, RI_ALL_OFFLINE }, - { 0x232000, 1, RI_ALL_ONLINE }, - { 0x232400, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x232404, 5631, RI_E2E3E3B0_OFFLINE }, - { 0x238000, 1, RI_ALL_ONLINE }, - { 0x238040, 1, RI_ALL_ONLINE }, - { 0x238080, 1, RI_ALL_ONLINE }, - { 0x2380c0, 1, RI_ALL_ONLINE }, - { 0x238100, 1, RI_ALL_ONLINE }, - { 0x238140, 1, RI_ALL_ONLINE }, - { 0x238180, 1, RI_ALL_ONLINE }, - { 0x2381c0, 1, RI_ALL_ONLINE }, - { 0x238200, 1, RI_ALL_ONLINE }, - { 0x238240, 1, RI_ALL_ONLINE }, - { 0x238280, 1, RI_ALL_ONLINE }, - { 0x2382c0, 1, RI_ALL_ONLINE }, - { 0x238300, 1, RI_ALL_ONLINE }, - { 0x238340, 1, RI_ALL_ONLINE }, - { 0x238380, 1, RI_ALL_ONLINE }, - { 0x2383c0, 1, RI_ALL_ONLINE }, - { 0x238400, 1, RI_ALL_ONLINE }, - { 0x238440, 1, RI_ALL_ONLINE }, - { 0x238480, 1, RI_ALL_ONLINE }, - { 0x2384c0, 1, RI_ALL_ONLINE }, - { 0x238500, 1, RI_ALL_ONLINE }, - { 0x238540, 1, RI_ALL_ONLINE }, - { 0x238580, 1, RI_ALL_ONLINE }, - { 0x2385c0, 19, RI_E2E3E3B0_ONLINE }, - { 0x238800, 1, RI_ALL_ONLINE }, - { 0x238840, 1, RI_ALL_ONLINE }, - { 0x238880, 1, RI_ALL_ONLINE }, - { 0x2388c0, 1, RI_ALL_ONLINE }, - { 0x238900, 1, RI_ALL_ONLINE }, - { 0x238940, 1, RI_ALL_ONLINE }, - { 0x238980, 1, RI_ALL_ONLINE }, - { 0x2389c0, 1, RI_ALL_ONLINE }, - { 0x238a00, 1, RI_ALL_ONLINE }, - { 0x238a40, 1, RI_ALL_ONLINE }, - { 0x238a80, 1, RI_ALL_ONLINE }, - { 0x238ac0, 1, RI_ALL_ONLINE }, - { 0x238b00, 1, RI_ALL_ONLINE }, - { 0x238b40, 1, RI_ALL_ONLINE }, - { 0x238b80, 1, RI_ALL_ONLINE }, - { 0x238bc0, 1, RI_ALL_ONLINE }, - { 0x238c00, 1, RI_ALL_ONLINE }, - { 0x238c40, 1, RI_ALL_ONLINE }, - { 0x238c80, 1, RI_ALL_ONLINE }, - { 0x238cc0, 1, RI_ALL_ONLINE }, - { 0x238cc4, 1, RI_E2E3E3B0_ONLINE }, - { 0x238d00, 1, RI_ALL_ONLINE }, - { 0x238d40, 1, RI_ALL_ONLINE }, - { 0x238d80, 1, RI_ALL_ONLINE }, - { 0x238dc0, 1, RI_ALL_ONLINE }, - { 0x238e00, 1, RI_ALL_ONLINE }, - { 0x238e40, 1, RI_ALL_ONLINE }, - { 0x238e80, 1, RI_ALL_ONLINE }, - { 0x238e84, 1, RI_E2E3E3B0_ONLINE }, - { 0x238ec0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x238f00, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x238f40, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x238f80, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x238fc0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x238fc4, 2, RI_E2E3E3B0_ONLINE }, - { 0x238fd0, 6, RI_E2E3E3B0_ONLINE }, - { 0x238fe8, 2, RI_E3E3B0_ONLINE }, - { 0x239000, 1, RI_E2E3E3B0_ONLINE }, - { 0x239040, 3, RI_E2E3E3B0_ONLINE }, - { 0x23905c, 1, RI_E3E3B0_ONLINE }, - { 0x239064, 1, RI_E3B0_ONLINE }, - { 0x239080, 10, RI_E3B0_ONLINE }, - { 0x240000, 2, RI_ALL_ONLINE }, - { 0x280000, 65, RI_ALL_ONLINE }, - { 0x28014c, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x280200, 58, RI_ALL_ONLINE }, - { 0x280340, 4, RI_ALL_ONLINE }, - { 0x280380, 1, RI_E2E3E3B0_ONLINE }, - { 0x280388, 1, RI_E2E3E3B0_ONLINE }, - { 0x280390, 1, RI_E2E3E3B0_ONLINE }, - { 0x280398, 1, RI_E2E3E3B0_ONLINE }, - { 0x2803a0, 1, RI_E2E3E3B0_ONLINE }, - { 0x2803a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x280404, 255, RI_E1E1H_OFFLINE }, - { 0x282000, 4, RI_ALL_ONLINE }, - { 0x282010, 2044, RI_ALL_OFFLINE }, - { 0x284000, 4, RI_E3E3B0_ONLINE }, - { 0x2a0000, 1, RI_ALL_ONLINE }, - { 0x2a0004, 5631, RI_ALL_OFFLINE }, - { 0x2a5800, 2560, RI_E1HE2E3E3B0_OFFLINE }, - { 0x2a8000, 1, RI_ALL_ONLINE }, - { 0x2a8004, 8191, RI_E1HE2E3E3B0_OFFLINE }, - { 0x2b0000, 1, RI_ALL_ONLINE }, - { 0x2b0004, 15, RI_E1H_OFFLINE }, - { 0x2b0040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b0044, 239, RI_E1H_OFFLINE }, - { 0x2b0400, 1, RI_ALL_ONLINE }, - { 0x2b0404, 255, RI_E1H_OFFLINE }, - { 0x2b0800, 1, RI_ALL_ONLINE }, - { 0x2b0840, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b0c00, 1, RI_ALL_ONLINE }, - { 0x2b1000, 1, RI_ALL_ONLINE }, - { 0x2b1040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b1400, 1, RI_ALL_ONLINE }, - { 0x2b1440, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b1480, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b14c0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b1800, 128, RI_ALL_OFFLINE }, - { 0x2b1c00, 128, RI_ALL_OFFLINE }, - { 0x2b2000, 1, RI_ALL_ONLINE }, - { 0x2b2400, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b2404, 5631, RI_E2E3E3B0_OFFLINE }, - { 0x2b8000, 1, RI_ALL_ONLINE }, - { 0x2b8040, 1, RI_ALL_ONLINE }, - { 0x2b8080, 1, RI_ALL_ONLINE }, - { 0x2b80c0, 1, RI_ALL_ONLINE }, - { 0x2b8100, 1, RI_ALL_ONLINE }, - { 0x2b8140, 1, RI_ALL_ONLINE }, - { 0x2b8180, 1, RI_ALL_ONLINE }, - { 0x2b81c0, 1, RI_ALL_ONLINE }, - { 0x2b8200, 1, RI_ALL_ONLINE }, - { 0x2b8240, 1, RI_ALL_ONLINE }, - { 0x2b8280, 1, RI_ALL_ONLINE }, - { 0x2b82c0, 1, RI_ALL_ONLINE }, - { 0x2b8300, 1, RI_ALL_ONLINE }, - { 0x2b8340, 1, RI_ALL_ONLINE }, - { 0x2b8380, 1, RI_ALL_ONLINE }, - { 0x2b83c0, 1, RI_ALL_ONLINE }, - { 0x2b8400, 1, RI_ALL_ONLINE }, - { 0x2b8440, 1, RI_ALL_ONLINE }, - { 0x2b8480, 1, RI_ALL_ONLINE }, - { 0x2b84c0, 1, RI_ALL_ONLINE }, - { 0x2b8500, 1, RI_ALL_ONLINE }, - { 0x2b8540, 1, RI_ALL_ONLINE }, - { 0x2b8580, 1, RI_ALL_ONLINE }, - { 0x2b85c0, 19, RI_E2E3E3B0_ONLINE }, - { 0x2b8800, 1, RI_ALL_ONLINE }, - { 0x2b8840, 1, RI_ALL_ONLINE }, - { 0x2b8880, 1, RI_ALL_ONLINE }, - { 0x2b88c0, 1, RI_ALL_ONLINE }, - { 0x2b8900, 1, RI_ALL_ONLINE }, - { 0x2b8940, 1, RI_ALL_ONLINE }, - { 0x2b8980, 1, RI_ALL_ONLINE }, - { 0x2b89c0, 1, RI_ALL_ONLINE }, - { 0x2b8a00, 1, RI_ALL_ONLINE }, - { 0x2b8a40, 1, RI_ALL_ONLINE }, - { 0x2b8a80, 1, RI_ALL_ONLINE }, - { 0x2b8ac0, 1, RI_ALL_ONLINE }, - { 0x2b8b00, 1, RI_ALL_ONLINE }, - { 0x2b8b40, 1, RI_ALL_ONLINE }, - { 0x2b8b80, 1, RI_ALL_ONLINE }, - { 0x2b8bc0, 1, RI_ALL_ONLINE }, - { 0x2b8c00, 1, RI_ALL_ONLINE }, - { 0x2b8c40, 1, RI_ALL_ONLINE }, - { 0x2b8c80, 1, RI_ALL_ONLINE }, - { 0x2b8cc0, 1, RI_ALL_ONLINE }, - { 0x2b8cc4, 1, RI_E2E3E3B0_ONLINE }, - { 0x2b8d00, 1, RI_ALL_ONLINE }, - { 0x2b8d40, 1, RI_ALL_ONLINE }, - { 0x2b8d80, 1, RI_ALL_ONLINE }, - { 0x2b8dc0, 1, RI_ALL_ONLINE }, - { 0x2b8e00, 1, RI_ALL_ONLINE }, - { 0x2b8e40, 1, RI_ALL_ONLINE }, - { 0x2b8e80, 1, RI_ALL_ONLINE }, - { 0x2b8e84, 1, RI_E2E3E3B0_ONLINE }, - { 0x2b8ec0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b8f00, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b8f40, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b8f80, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b8fc0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x2b8fc4, 2, RI_E2E3E3B0_ONLINE }, - { 0x2b8fd0, 6, RI_E2E3E3B0_ONLINE }, - { 0x2b8fe8, 2, RI_E3E3B0_ONLINE }, - { 0x2b9000, 1, RI_E2E3E3B0_ONLINE }, - { 0x2b9040, 3, RI_E2E3E3B0_ONLINE }, - { 0x2b905c, 1, RI_E3E3B0_ONLINE }, - { 0x2b9064, 1, RI_E3B0_ONLINE }, - { 0x2b9080, 10, RI_E3B0_ONLINE }, - { 0x2b9400, 14, RI_E2E3E3B0_ONLINE }, - { 0x2b943c, 19, RI_E2E3E3B0_ONLINE }, - { 0x2b9490, 10, RI_E2E3E3B0_ONLINE }, - { 0x2c0000, 2, RI_ALL_ONLINE }, - { 0x300000, 65, RI_ALL_ONLINE }, - { 0x30014c, 2, RI_E1HE2E3E3B0_ONLINE }, - { 0x300200, 58, RI_ALL_ONLINE }, - { 0x300340, 4, RI_ALL_ONLINE }, - { 0x300380, 1, RI_E2E3E3B0_ONLINE }, - { 0x300388, 1, RI_E2E3E3B0_ONLINE }, - { 0x300390, 1, RI_E2E3E3B0_ONLINE }, - { 0x300398, 1, RI_E2E3E3B0_ONLINE }, - { 0x3003a0, 1, RI_E2E3E3B0_ONLINE }, - { 0x3003a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x300404, 255, RI_E1E1H_OFFLINE }, - { 0x302000, 4, RI_ALL_ONLINE }, - { 0x302010, 2044, RI_ALL_OFFLINE }, - { 0x304000, 4, RI_E3E3B0_ONLINE }, - { 0x320000, 1, RI_ALL_ONLINE }, - { 0x320004, 5631, RI_ALL_OFFLINE }, - { 0x325800, 2560, RI_E1HE2E3E3B0_OFFLINE }, - { 0x328000, 1, RI_ALL_ONLINE }, - { 0x328004, 8191, RI_E1HE2E3E3B0_OFFLINE }, - { 0x330000, 1, RI_ALL_ONLINE }, - { 0x330004, 15, RI_E1H_OFFLINE }, - { 0x330040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x330044, 239, RI_E1H_OFFLINE }, - { 0x330400, 1, RI_ALL_ONLINE }, - { 0x330404, 255, RI_E1H_OFFLINE }, - { 0x330800, 1, RI_ALL_ONLINE }, - { 0x330840, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x330c00, 1, RI_ALL_ONLINE }, - { 0x331000, 1, RI_ALL_ONLINE }, - { 0x331040, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x331400, 1, RI_ALL_ONLINE }, - { 0x331440, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x331480, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x3314c0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x331800, 128, RI_ALL_OFFLINE }, - { 0x331c00, 128, RI_ALL_OFFLINE }, - { 0x332000, 1, RI_ALL_ONLINE }, - { 0x332400, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x332404, 5631, RI_E2E3E3B0_OFFLINE }, - { 0x338000, 1, RI_ALL_ONLINE }, - { 0x338040, 1, RI_ALL_ONLINE }, - { 0x338080, 1, RI_ALL_ONLINE }, - { 0x3380c0, 1, RI_ALL_ONLINE }, - { 0x338100, 1, RI_ALL_ONLINE }, - { 0x338140, 1, RI_ALL_ONLINE }, - { 0x338180, 1, RI_ALL_ONLINE }, - { 0x3381c0, 1, RI_ALL_ONLINE }, - { 0x338200, 1, RI_ALL_ONLINE }, - { 0x338240, 1, RI_ALL_ONLINE }, - { 0x338280, 1, RI_ALL_ONLINE }, - { 0x3382c0, 1, RI_ALL_ONLINE }, - { 0x338300, 1, RI_ALL_ONLINE }, - { 0x338340, 1, RI_ALL_ONLINE }, - { 0x338380, 1, RI_ALL_ONLINE }, - { 0x3383c0, 1, RI_ALL_ONLINE }, - { 0x338400, 1, RI_ALL_ONLINE }, - { 0x338440, 1, RI_ALL_ONLINE }, - { 0x338480, 1, RI_ALL_ONLINE }, - { 0x3384c0, 1, RI_ALL_ONLINE }, - { 0x338500, 1, RI_ALL_ONLINE }, - { 0x338540, 1, RI_ALL_ONLINE }, - { 0x338580, 1, RI_ALL_ONLINE }, - { 0x3385c0, 19, RI_E2E3E3B0_ONLINE }, - { 0x338800, 1, RI_ALL_ONLINE }, - { 0x338840, 1, RI_ALL_ONLINE }, - { 0x338880, 1, RI_ALL_ONLINE }, - { 0x3388c0, 1, RI_ALL_ONLINE }, - { 0x338900, 1, RI_ALL_ONLINE }, - { 0x338940, 1, RI_ALL_ONLINE }, - { 0x338980, 1, RI_ALL_ONLINE }, - { 0x3389c0, 1, RI_ALL_ONLINE }, - { 0x338a00, 1, RI_ALL_ONLINE }, - { 0x338a40, 1, RI_ALL_ONLINE }, - { 0x338a80, 1, RI_ALL_ONLINE }, - { 0x338ac0, 1, RI_ALL_ONLINE }, - { 0x338b00, 1, RI_ALL_ONLINE }, - { 0x338b40, 1, RI_ALL_ONLINE }, - { 0x338b80, 1, RI_ALL_ONLINE }, - { 0x338bc0, 1, RI_ALL_ONLINE }, - { 0x338c00, 1, RI_ALL_ONLINE }, - { 0x338c40, 1, RI_ALL_ONLINE }, - { 0x338c80, 1, RI_ALL_ONLINE }, - { 0x338cc0, 1, RI_ALL_ONLINE }, - { 0x338cc4, 1, RI_E2E3E3B0_ONLINE }, - { 0x338d00, 1, RI_ALL_ONLINE }, - { 0x338d40, 1, RI_ALL_ONLINE }, - { 0x338d80, 1, RI_ALL_ONLINE }, - { 0x338dc0, 1, RI_ALL_ONLINE }, - { 0x338e00, 1, RI_ALL_ONLINE }, - { 0x338e40, 1, RI_ALL_ONLINE }, - { 0x338e80, 1, RI_ALL_ONLINE }, - { 0x338e84, 1, RI_E2E3E3B0_ONLINE }, - { 0x338ec0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x338f00, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x338f40, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x338f80, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x338fc0, 1, RI_E1HE2E3E3B0_ONLINE }, - { 0x338fc4, 2, RI_E2E3E3B0_ONLINE }, - { 0x338fd0, 6, RI_E2E3E3B0_ONLINE }, - { 0x338fe8, 2, RI_E3E3B0_ONLINE }, - { 0x339000, 1, RI_E2E3E3B0_ONLINE }, - { 0x339040, 3, RI_E2E3E3B0_ONLINE }, - { 0x33905c, 1, RI_E3E3B0_ONLINE }, - { 0x339064, 1, RI_E3B0_ONLINE }, - { 0x339080, 10, RI_E3B0_ONLINE }, - { 0x340000, 2, RI_ALL_ONLINE }, + { 0x2000, 1, 0x1f, 0xfff}, + { 0x2004, 1, 0x1f, 0x1fff}, + { 0x2008, 25, 0x1f, 0xfff}, + { 0x206c, 1, 0x1f, 0x1fff}, + { 0x2070, 313, 0x1f, 0xfff}, + { 0x2800, 103, 0x1f, 0xfff}, + { 0x3000, 287, 0x1f, 0xfff}, + { 0x3800, 331, 0x1f, 0xfff}, + { 0x8800, 6, 0x1f, 0x924}, + { 0x8818, 1, 0x1e, 0x924}, + { 0x9000, 4, 0x1c, 0x924}, + { 0x9010, 7, 0x1c, 0xfff}, + { 0x902c, 1, 0x1c, 0x924}, + { 0x9030, 1, 0x1c, 0xfff}, + { 0x9034, 13, 0x1c, 0x924}, + { 0x9068, 16, 0x1c, 0xfff}, + { 0x90a8, 98, 0x1c, 0x924}, + { 0x9230, 2, 0x1c, 0xfff}, + { 0x9238, 3, 0x1c, 0x924}, + { 0x9244, 1, 0x1c, 0xfff}, + { 0x9248, 1, 0x1c, 0x924}, + { 0x924c, 1, 0x4, 0x924}, + { 0x9250, 16, 0x1c, 0x924}, + { 0x92a8, 2, 0x1c, 0x1fff}, + { 0x92b4, 1, 0x1c, 0x1fff}, + { 0x9400, 33, 0x1c, 0x924}, + { 0x9484, 5, 0x18, 0x924}, + { 0xa000, 27, 0x1f, 0x924}, + { 0xa06c, 1, 0x3, 0x924}, + { 0xa070, 2, 0x1f, 0x924}, + { 0xa078, 1, 0x1f, 0x1fff}, + { 0xa07c, 31, 0x1f, 0x924}, + { 0xa0f8, 1, 0x1f, 0x1fff}, + { 0xa0fc, 3, 0x1f, 0x924}, + { 0xa108, 1, 0x1f, 0x1fff}, + { 0xa10c, 3, 0x1f, 0x924}, + { 0xa118, 1, 0x1f, 0x1fff}, + { 0xa11c, 28, 0x1f, 0x924}, + { 0xa18c, 4, 0x3, 0x924}, + { 0xa19c, 3, 0x1f, 0x924}, + { 0xa1a8, 1, 0x1f, 0x1fff}, + { 0xa1ac, 3, 0x1f, 0x924}, + { 0xa1b8, 1, 0x1f, 0x1fff}, + { 0xa1bc, 54, 0x1f, 0x924}, + { 0xa294, 2, 0x3, 0x924}, + { 0xa29c, 2, 0x1f, 0x924}, + { 0xa2a4, 2, 0x7, 0x924}, + { 0xa2ac, 2, 0x1f, 0x924}, + { 0xa2b4, 1, 0x1f, 0x1fff}, + { 0xa2b8, 49, 0x1f, 0x924}, + { 0xa38c, 2, 0x1f, 0x1fff}, + { 0xa398, 1, 0x1f, 0x1fff}, + { 0xa39c, 7, 0x1e, 0x924}, + { 0xa3b8, 2, 0x18, 0x924}, + { 0xa3c0, 1, 0x1e, 0x924}, + { 0xa3c4, 1, 0x1e, 0xfff}, + { 0xa3c8, 1, 0x1e, 0x924}, + { 0xa3d0, 1, 0x1e, 0x924}, + { 0xa3d8, 1, 0x1e, 0x924}, + { 0xa3e0, 1, 0x1e, 0x924}, + { 0xa3e8, 1, 0x1e, 0x924}, + { 0xa3f0, 1, 0x1e, 0x924}, + { 0xa3f8, 1, 0x1e, 0x924}, + { 0xa400, 1, 0x1f, 0x924}, + { 0xa404, 1, 0x1f, 0xfff}, + { 0xa408, 2, 0x1f, 0x1fff}, + { 0xa410, 7, 0x1f, 0x924}, + { 0xa42c, 12, 0x1f, 0xfff}, + { 0xa45c, 1, 0x1f, 0x924}, + { 0xa460, 1, 0x1f, 0x1924}, + { 0xa464, 15, 0x1f, 0x924}, + { 0xa4a0, 1, 0x7, 0x924}, + { 0xa4a4, 2, 0x1f, 0x924}, + { 0xa4ac, 2, 0x3, 0x924}, + { 0xa4b4, 1, 0x7, 0x924}, + { 0xa4b8, 2, 0x3, 0x924}, + { 0xa4c0, 3, 0x1f, 0x924}, + { 0xa4cc, 5, 0x3, 0x924}, + { 0xa4e0, 3, 0x1f, 0x924}, + { 0xa4fc, 2, 0x1f, 0x924}, + { 0xa504, 1, 0x3, 0x924}, + { 0xa508, 3, 0x1f, 0x924}, + { 0xa518, 1, 0x1f, 0x924}, + { 0xa520, 1, 0x1f, 0x924}, + { 0xa528, 1, 0x1f, 0x924}, + { 0xa530, 1, 0x1f, 0x924}, + { 0xa538, 1, 0x1f, 0x924}, + { 0xa540, 1, 0x1f, 0x924}, + { 0xa548, 1, 0x3, 0x924}, + { 0xa550, 1, 0x3, 0x924}, + { 0xa558, 1, 0x3, 0x924}, + { 0xa560, 1, 0x3, 0x924}, + { 0xa568, 1, 0x3, 0x924}, + { 0xa570, 1, 0x1f, 0x924}, + { 0xa580, 1, 0x1f, 0x1fff}, + { 0xa590, 1, 0x1f, 0x1fff}, + { 0xa5a0, 1, 0x7, 0x924}, + { 0xa5c0, 1, 0x1f, 0x924}, + { 0xa5e0, 1, 0x1e, 0x924}, + { 0xa5e8, 1, 0x1e, 0x924}, + { 0xa5f0, 1, 0x1e, 0x924}, + { 0xa5f8, 1, 0x6, 0x924}, + { 0xa5fc, 1, 0x1e, 0x924}, + { 0xa600, 5, 0x1e, 0xfff}, + { 0xa614, 1, 0x1e, 0x924}, + { 0xa618, 1, 0x1e, 0xfff}, + { 0xa61c, 1, 0x1e, 0x924}, + { 0xa620, 6, 0x1c, 0x924}, + { 0xa638, 20, 0x4, 0x924}, + { 0xa688, 35, 0x1c, 0x924}, + { 0xa714, 1, 0x1c, 0xfff}, + { 0xa718, 2, 0x1c, 0x924}, + { 0xa720, 1, 0x1c, 0xfff}, + { 0xa724, 3, 0x1c, 0x924}, + { 0xa730, 1, 0x4, 0x924}, + { 0xa734, 2, 0x1c, 0x924}, + { 0xa73c, 4, 0x4, 0x924}, + { 0xa74c, 1, 0x1c, 0x924}, + { 0xa750, 1, 0x1c, 0xfff}, + { 0xa754, 3, 0x1c, 0x924}, + { 0xa760, 5, 0x4, 0x924}, + { 0xa774, 7, 0x1c, 0x924}, + { 0xa790, 15, 0x4, 0x924}, + { 0xa7cc, 4, 0x1c, 0x924}, + { 0xa7e0, 6, 0x18, 0x924}, + { 0xa800, 18, 0x4, 0x924}, + { 0xa848, 33, 0x1c, 0x924}, + { 0xa8cc, 2, 0x18, 0x924}, + { 0xa8d4, 4, 0x1c, 0x924}, + { 0xa8e4, 1, 0x18, 0x924}, + { 0xa8e8, 1, 0x1c, 0x924}, + { 0xa8f0, 1, 0x1c, 0x924}, + { 0xa8f8, 30, 0x18, 0x924}, + { 0xa974, 73, 0x18, 0x924}, + { 0xac30, 1, 0x18, 0x924}, + { 0xac40, 1, 0x18, 0x924}, + { 0xac50, 1, 0x18, 0x924}, + { 0xac60, 1, 0x10, 0x924}, + { 0x10000, 9, 0x1f, 0x924}, + { 0x10024, 1, 0x7, 0x924}, + { 0x10028, 5, 0x1f, 0x924}, + { 0x1003c, 6, 0x7, 0x924}, + { 0x10054, 20, 0x1f, 0x924}, + { 0x100a4, 4, 0x7, 0x924}, + { 0x100b4, 11, 0x1f, 0x924}, + { 0x100e0, 4, 0x7, 0x924}, + { 0x100f0, 8, 0x1f, 0x924}, + { 0x10110, 6, 0x7, 0x924}, + { 0x10128, 110, 0x1f, 0x924}, + { 0x102e0, 4, 0x7, 0x924}, + { 0x102f0, 18, 0x1f, 0x924}, + { 0x10338, 20, 0x7, 0x924}, + { 0x10388, 10, 0x1f, 0x924}, + { 0x103d0, 2, 0x3, 0x1fff}, + { 0x103dc, 1, 0x3, 0x1fff}, + { 0x10400, 6, 0x7, 0x924}, + { 0x10418, 1, 0x1f, 0xfff}, + { 0x1041c, 1, 0x1f, 0x924}, + { 0x10420, 1, 0x1f, 0xfff}, + { 0x10424, 1, 0x1f, 0x924}, + { 0x10428, 1, 0x1f, 0xfff}, + { 0x1042c, 1, 0x1f, 0x924}, + { 0x10430, 10, 0x7, 0x924}, + { 0x10458, 2, 0x1f, 0x924}, + { 0x10460, 1, 0x1f, 0xfff}, + { 0x10464, 4, 0x1f, 0x924}, + { 0x10474, 1, 0x1f, 0xfff}, + { 0x10478, 14, 0x1f, 0x924}, + { 0x104b0, 12, 0x7, 0x924}, + { 0x104e0, 1, 0x1f, 0xfff}, + { 0x104e8, 1, 0x1f, 0x924}, + { 0x104ec, 1, 0x1f, 0xfff}, + { 0x104f4, 1, 0x1f, 0x924}, + { 0x104f8, 1, 0x1f, 0xfff}, + { 0x10500, 2, 0x1f, 0x924}, + { 0x10508, 1, 0x1f, 0xfff}, + { 0x1050c, 9, 0x1f, 0x924}, + { 0x10530, 1, 0x1f, 0xfff}, + { 0x10534, 1, 0x1f, 0x924}, + { 0x10538, 1, 0x1f, 0xfff}, + { 0x1053c, 3, 0x1f, 0x924}, + { 0x10548, 1, 0x1f, 0xfff}, + { 0x1054c, 3, 0x1f, 0x924}, + { 0x10558, 1, 0x1f, 0xfff}, + { 0x1055c, 123, 0x1f, 0x924}, + { 0x10750, 2, 0x7, 0x924}, + { 0x10760, 2, 0x7, 0x924}, + { 0x10770, 2, 0x7, 0x924}, + { 0x10780, 2, 0x7, 0x924}, + { 0x10790, 2, 0x1f, 0x924}, + { 0x107a0, 2, 0x7, 0x924}, + { 0x107b0, 2, 0x7, 0x924}, + { 0x107c0, 2, 0x7, 0x924}, + { 0x107d0, 2, 0x7, 0x924}, + { 0x107e0, 2, 0x1f, 0x924}, + { 0x10880, 2, 0x1f, 0x924}, + { 0x10900, 2, 0x1f, 0x924}, + { 0x16000, 1, 0x6, 0x924}, + { 0x16004, 25, 0x1e, 0x924}, + { 0x16070, 8, 0x1e, 0x924}, + { 0x16090, 4, 0xe, 0x924}, + { 0x160a0, 6, 0x1e, 0x924}, + { 0x160c0, 7, 0x1e, 0x924}, + { 0x160dc, 2, 0x6, 0x924}, + { 0x160e4, 6, 0x1e, 0x924}, + { 0x160fc, 4, 0x1e, 0x1fff}, + { 0x1610c, 2, 0x6, 0x924}, + { 0x16114, 6, 0x1e, 0x924}, + { 0x16140, 48, 0x1e, 0x1fff}, + { 0x16204, 5, 0x1e, 0x924}, + { 0x18000, 1, 0x1e, 0x924}, + { 0x18008, 1, 0x1e, 0x924}, + { 0x18010, 35, 0x1c, 0x924}, + { 0x180a4, 2, 0x1c, 0x924}, + { 0x180c0, 9, 0x1c, 0x924}, + { 0x180e4, 1, 0xc, 0x924}, + { 0x180e8, 2, 0x1c, 0x924}, + { 0x180f0, 1, 0xc, 0x924}, + { 0x180f4, 79, 0x1c, 0x924}, + { 0x18230, 1, 0xc, 0x924}, + { 0x18234, 2, 0x1c, 0x924}, + { 0x1823c, 1, 0xc, 0x924}, + { 0x18240, 13, 0x1c, 0x924}, + { 0x18274, 1, 0x4, 0x924}, + { 0x18278, 12, 0x1c, 0x924}, + { 0x182a8, 1, 0x1c, 0xfff}, + { 0x182ac, 3, 0x1c, 0x924}, + { 0x182b8, 1, 0x1c, 0xfff}, + { 0x182bc, 19, 0x1c, 0x924}, + { 0x18308, 1, 0x1c, 0xfff}, + { 0x1830c, 3, 0x1c, 0x924}, + { 0x18318, 1, 0x1c, 0xfff}, + { 0x1831c, 7, 0x1c, 0x924}, + { 0x18338, 1, 0x1c, 0xfff}, + { 0x1833c, 3, 0x1c, 0x924}, + { 0x18348, 1, 0x1c, 0xfff}, + { 0x1834c, 28, 0x1c, 0x924}, + { 0x183bc, 2, 0x1c, 0x1fff}, + { 0x183c8, 3, 0x1c, 0x1fff}, + { 0x183d8, 1, 0x1c, 0x1fff}, + { 0x18440, 48, 0x1c, 0x1fff}, + { 0x18500, 15, 0x1c, 0x924}, + { 0x18570, 1, 0x18, 0xfff}, + { 0x18574, 1, 0x18, 0x924}, + { 0x18578, 1, 0x18, 0xfff}, + { 0x1857c, 4, 0x18, 0x924}, + { 0x1858c, 1, 0x18, 0xfff}, + { 0x18590, 1, 0x18, 0x924}, + { 0x18594, 1, 0x18, 0xfff}, + { 0x18598, 32, 0x18, 0x924}, + { 0x18618, 5, 0x10, 0x924}, + { 0x1862c, 4, 0x10, 0xfff}, + { 0x1863c, 16, 0x10, 0x924}, + { 0x18680, 44, 0x10, 0x924}, + { 0x18748, 12, 0x10, 0x924}, + { 0x18788, 1, 0x10, 0x924}, + { 0x1879c, 6, 0x10, 0x924}, + { 0x187c4, 51, 0x10, 0x924}, + { 0x18a00, 48, 0x10, 0x924}, + { 0x20000, 24, 0x1f, 0x924}, + { 0x20060, 8, 0x1f, 0x9e4}, + { 0x20080, 94, 0x1f, 0x924}, + { 0x201f8, 1, 0x3, 0x924}, + { 0x201fc, 1, 0x1f, 0x924}, + { 0x20200, 1, 0x3, 0x924}, + { 0x20204, 1, 0x1f, 0x924}, + { 0x20208, 1, 0x3, 0x924}, + { 0x2020c, 4, 0x1f, 0x924}, + { 0x2021c, 11, 0x1f, 0xfff}, + { 0x20248, 24, 0x1f, 0x924}, + { 0x202b8, 2, 0x1f, 0x1fff}, + { 0x202c4, 1, 0x1f, 0x1fff}, + { 0x202c8, 1, 0x1c, 0x924}, + { 0x202d8, 4, 0x1c, 0x924}, + { 0x202f0, 1, 0x10, 0x924}, + { 0x20400, 1, 0x1f, 0x924}, + { 0x20404, 1, 0x1f, 0xfff}, + { 0x2040c, 2, 0x1f, 0xfff}, + { 0x20414, 2, 0x1f, 0x924}, + { 0x2041c, 2, 0x1f, 0xfff}, + { 0x20424, 2, 0x1f, 0x924}, + { 0x2042c, 18, 0x1e, 0x924}, + { 0x20480, 1, 0x1f, 0x924}, + { 0x20500, 1, 0x1f, 0x924}, + { 0x20600, 1, 0x1f, 0x924}, + { 0x28000, 1, 0x1f, 0x9e4}, + { 0x28004, 255, 0x1f, 0x180}, + { 0x28400, 1, 0x1f, 0x1c0}, + { 0x28404, 255, 0x1f, 0x180}, + { 0x28800, 1, 0x1f, 0x1c0}, + { 0x28804, 255, 0x1f, 0x180}, + { 0x28c00, 1, 0x1f, 0x1c0}, + { 0x28c04, 255, 0x1f, 0x180}, + { 0x29000, 1, 0x1f, 0x1c0}, + { 0x29004, 255, 0x1f, 0x180}, + { 0x29400, 1, 0x1f, 0x1c0}, + { 0x29404, 255, 0x1f, 0x180}, + { 0x29800, 1, 0x1f, 0x1c0}, + { 0x29804, 255, 0x1f, 0x180}, + { 0x29c00, 1, 0x1f, 0x1c0}, + { 0x29c04, 255, 0x1f, 0x180}, + { 0x2a000, 1, 0x1f, 0x1c0}, + { 0x2a004, 255, 0x1f, 0x180}, + { 0x2a400, 1, 0x1f, 0x1c0}, + { 0x2a404, 255, 0x1f, 0x180}, + { 0x2a800, 1, 0x1f, 0x1c0}, + { 0x2a804, 255, 0x1f, 0x180}, + { 0x2ac00, 1, 0x1f, 0x1c0}, + { 0x2ac04, 255, 0x1f, 0x180}, + { 0x2b000, 1, 0x1f, 0x1c0}, + { 0x2b004, 255, 0x1f, 0x180}, + { 0x2b400, 1, 0x1f, 0x1c0}, + { 0x2b404, 255, 0x1f, 0x180}, + { 0x2b800, 1, 0x1f, 0x1c0}, + { 0x2b804, 255, 0x1f, 0x180}, + { 0x2bc00, 1, 0x1f, 0x1c0}, + { 0x2bc04, 255, 0x1f, 0x180}, + { 0x2c000, 1, 0x1f, 0x1c0}, + { 0x2c004, 255, 0x1f, 0x180}, + { 0x2c400, 1, 0x1f, 0x1c0}, + { 0x2c404, 255, 0x1f, 0x180}, + { 0x2c800, 1, 0x1f, 0x1c0}, + { 0x2c804, 255, 0x1f, 0x180}, + { 0x2cc00, 1, 0x1f, 0x1c0}, + { 0x2cc04, 255, 0x1f, 0x180}, + { 0x2d000, 1, 0x1f, 0x1c0}, + { 0x2d004, 255, 0x1f, 0x180}, + { 0x2d400, 1, 0x1f, 0x1c0}, + { 0x2d404, 255, 0x1f, 0x180}, + { 0x2d800, 1, 0x1f, 0x1c0}, + { 0x2d804, 255, 0x1f, 0x180}, + { 0x2dc00, 1, 0x1f, 0x1c0}, + { 0x2dc04, 255, 0x1f, 0x180}, + { 0x2e000, 1, 0x1f, 0x1c0}, + { 0x2e004, 255, 0x1f, 0x180}, + { 0x2e400, 1, 0x1f, 0x1c0}, + { 0x2e404, 255, 0x1f, 0x180}, + { 0x2e800, 1, 0x1f, 0x1c0}, + { 0x2e804, 255, 0x1f, 0x180}, + { 0x2ec00, 1, 0x1f, 0x1c0}, + { 0x2ec04, 255, 0x1f, 0x180}, + { 0x2f000, 1, 0x1f, 0x1c0}, + { 0x2f004, 255, 0x1f, 0x180}, + { 0x2f400, 1, 0x1f, 0x1c0}, + { 0x2f404, 255, 0x1f, 0x180}, + { 0x2f800, 1, 0x1f, 0x1c0}, + { 0x2f804, 255, 0x1f, 0x180}, + { 0x2fc00, 1, 0x1f, 0x1c0}, + { 0x2fc04, 255, 0x1f, 0x180}, + { 0x30000, 1, 0x1f, 0x9e4}, + { 0x30004, 255, 0x1f, 0x180}, + { 0x30400, 1, 0x1f, 0x1c0}, + { 0x30404, 255, 0x1f, 0x180}, + { 0x30800, 1, 0x1f, 0x1c0}, + { 0x30804, 255, 0x1f, 0x180}, + { 0x30c00, 1, 0x1f, 0x1c0}, + { 0x30c04, 255, 0x1f, 0x180}, + { 0x31000, 1, 0x1f, 0x1c0}, + { 0x31004, 255, 0x1f, 0x180}, + { 0x31400, 1, 0x1f, 0x1c0}, + { 0x31404, 255, 0x1f, 0x180}, + { 0x31800, 1, 0x1f, 0x1c0}, + { 0x31804, 255, 0x1f, 0x180}, + { 0x31c00, 1, 0x1f, 0x1c0}, + { 0x31c04, 255, 0x1f, 0x180}, + { 0x32000, 1, 0x1f, 0x1c0}, + { 0x32004, 255, 0x1f, 0x180}, + { 0x32400, 1, 0x1f, 0x1c0}, + { 0x32404, 255, 0x1f, 0x180}, + { 0x32800, 1, 0x1f, 0x1c0}, + { 0x32804, 255, 0x1f, 0x180}, + { 0x32c00, 1, 0x1f, 0x1c0}, + { 0x32c04, 255, 0x1f, 0x180}, + { 0x33000, 1, 0x1f, 0x1c0}, + { 0x33004, 255, 0x1f, 0x180}, + { 0x33400, 1, 0x1f, 0x1c0}, + { 0x33404, 255, 0x1f, 0x180}, + { 0x33800, 1, 0x1f, 0x1c0}, + { 0x33804, 255, 0x1f, 0x180}, + { 0x33c00, 1, 0x1f, 0x1c0}, + { 0x33c04, 255, 0x1f, 0x180}, + { 0x34000, 1, 0x1f, 0x1c0}, + { 0x34004, 255, 0x1f, 0x180}, + { 0x34400, 1, 0x1f, 0x1c0}, + { 0x34404, 255, 0x1f, 0x180}, + { 0x34800, 1, 0x1f, 0x1c0}, + { 0x34804, 255, 0x1f, 0x180}, + { 0x34c00, 1, 0x1f, 0x1c0}, + { 0x34c04, 255, 0x1f, 0x180}, + { 0x35000, 1, 0x1f, 0x1c0}, + { 0x35004, 255, 0x1f, 0x180}, + { 0x35400, 1, 0x1f, 0x1c0}, + { 0x35404, 255, 0x1f, 0x180}, + { 0x35800, 1, 0x1f, 0x1c0}, + { 0x35804, 255, 0x1f, 0x180}, + { 0x35c00, 1, 0x1f, 0x1c0}, + { 0x35c04, 255, 0x1f, 0x180}, + { 0x36000, 1, 0x1f, 0x1c0}, + { 0x36004, 255, 0x1f, 0x180}, + { 0x36400, 1, 0x1f, 0x1c0}, + { 0x36404, 255, 0x1f, 0x180}, + { 0x36800, 1, 0x1f, 0x1c0}, + { 0x36804, 255, 0x1f, 0x180}, + { 0x36c00, 1, 0x1f, 0x1c0}, + { 0x36c04, 255, 0x1f, 0x180}, + { 0x37000, 1, 0x1f, 0x1c0}, + { 0x37004, 255, 0x1f, 0x180}, + { 0x37400, 1, 0x1f, 0x1c0}, + { 0x37404, 255, 0x1f, 0x180}, + { 0x37800, 1, 0x1f, 0x1c0}, + { 0x37804, 255, 0x1f, 0x180}, + { 0x37c00, 1, 0x1f, 0x1c0}, + { 0x37c04, 255, 0x1f, 0x180}, + { 0x38000, 1, 0x1f, 0x1c0}, + { 0x38004, 255, 0x1f, 0x180}, + { 0x38400, 1, 0x1f, 0x1c0}, + { 0x38404, 255, 0x1f, 0x180}, + { 0x38800, 1, 0x1f, 0x1c0}, + { 0x38804, 255, 0x1f, 0x180}, + { 0x38c00, 1, 0x1f, 0x1c0}, + { 0x38c04, 255, 0x1f, 0x180}, + { 0x39000, 1, 0x1f, 0x1c0}, + { 0x39004, 255, 0x1f, 0x180}, + { 0x39400, 1, 0x1f, 0x1c0}, + { 0x39404, 255, 0x1f, 0x180}, + { 0x39800, 1, 0x1f, 0x1c0}, + { 0x39804, 255, 0x1f, 0x180}, + { 0x39c00, 1, 0x1f, 0x1c0}, + { 0x39c04, 255, 0x1f, 0x180}, + { 0x3a000, 1, 0x1f, 0x1c0}, + { 0x3a004, 255, 0x1f, 0x180}, + { 0x3a400, 1, 0x1f, 0x1c0}, + { 0x3a404, 255, 0x1f, 0x180}, + { 0x3a800, 1, 0x1f, 0x1c0}, + { 0x3a804, 255, 0x1f, 0x180}, + { 0x3ac00, 1, 0x1f, 0x1c0}, + { 0x3ac04, 255, 0x1f, 0x180}, + { 0x3b000, 1, 0x1f, 0x1c0}, + { 0x3b004, 255, 0x1f, 0x180}, + { 0x3b400, 1, 0x1f, 0x1c0}, + { 0x3b404, 255, 0x1f, 0x180}, + { 0x3b800, 1, 0x1f, 0x1c0}, + { 0x3b804, 255, 0x1f, 0x180}, + { 0x3bc00, 1, 0x1f, 0x1c0}, + { 0x3bc04, 255, 0x1f, 0x180}, + { 0x3c000, 1, 0x1f, 0x1c0}, + { 0x3c004, 255, 0x1f, 0x180}, + { 0x3c400, 1, 0x1f, 0x1c0}, + { 0x3c404, 255, 0x1f, 0x180}, + { 0x3c800, 1, 0x1f, 0x1c0}, + { 0x3c804, 255, 0x1f, 0x180}, + { 0x3cc00, 1, 0x1f, 0x1c0}, + { 0x3cc04, 255, 0x1f, 0x180}, + { 0x3d000, 1, 0x1f, 0x1c0}, + { 0x3d004, 255, 0x1f, 0x180}, + { 0x3d400, 1, 0x1f, 0x1c0}, + { 0x3d404, 255, 0x1f, 0x180}, + { 0x3d800, 1, 0x1f, 0x1c0}, + { 0x3d804, 255, 0x1f, 0x180}, + { 0x3dc00, 1, 0x1f, 0x1c0}, + { 0x3dc04, 255, 0x1f, 0x180}, + { 0x3e000, 1, 0x1f, 0x1c0}, + { 0x3e004, 255, 0x1f, 0x180}, + { 0x3e400, 1, 0x1f, 0x1c0}, + { 0x3e404, 255, 0x1f, 0x180}, + { 0x3e800, 1, 0x1f, 0x1c0}, + { 0x3e804, 255, 0x1f, 0x180}, + { 0x3ec00, 1, 0x1f, 0x1c0}, + { 0x3ec04, 255, 0x1f, 0x180}, + { 0x3f000, 1, 0x1f, 0x1c0}, + { 0x3f004, 255, 0x1f, 0x180}, + { 0x3f400, 1, 0x1f, 0x1c0}, + { 0x3f404, 255, 0x1f, 0x180}, + { 0x3f800, 1, 0x1f, 0x1c0}, + { 0x3f804, 255, 0x1f, 0x180}, + { 0x3fc00, 1, 0x1f, 0x1c0}, + { 0x3fc04, 255, 0x1f, 0x180}, + { 0x40000, 85, 0x1f, 0x924}, + { 0x40154, 13, 0x1f, 0xfff}, + { 0x40198, 2, 0x1f, 0x1fff}, + { 0x401a4, 1, 0x1f, 0x1fff}, + { 0x401a8, 8, 0x1e, 0x924}, + { 0x401c8, 1, 0x2, 0x924}, + { 0x401cc, 2, 0x1e, 0x924}, + { 0x401d4, 2, 0x1c, 0x924}, + { 0x40200, 4, 0x1f, 0x924}, + { 0x40220, 6, 0x1c, 0x924}, + { 0x40238, 8, 0xc, 0x924}, + { 0x40258, 4, 0x1c, 0x924}, + { 0x40268, 2, 0x18, 0x924}, + { 0x40270, 17, 0x10, 0x924}, + { 0x40400, 43, 0x1f, 0x924}, + { 0x404bc, 2, 0x1f, 0x1fff}, + { 0x404c8, 1, 0x1f, 0x1fff}, + { 0x404cc, 3, 0x1e, 0x924}, + { 0x404e0, 1, 0x1c, 0x924}, + { 0x40500, 2, 0x1f, 0x924}, + { 0x40510, 2, 0x1f, 0x924}, + { 0x40520, 2, 0x1f, 0x924}, + { 0x40530, 2, 0x1f, 0x924}, + { 0x40540, 2, 0x1f, 0x924}, + { 0x40550, 10, 0x1c, 0x924}, + { 0x40610, 2, 0x1c, 0x924}, + { 0x42000, 164, 0x1f, 0x924}, + { 0x422b0, 2, 0x1f, 0x1fff}, + { 0x422bc, 1, 0x1f, 0x1fff}, + { 0x422c0, 4, 0x1c, 0x924}, + { 0x422d4, 5, 0x1e, 0x924}, + { 0x422e8, 1, 0x1c, 0x924}, + { 0x42400, 49, 0x1f, 0x924}, + { 0x424c8, 32, 0x1f, 0x924}, + { 0x42548, 1, 0x1f, 0xfff}, + { 0x4254c, 1, 0x1f, 0x924}, + { 0x42550, 1, 0x1f, 0xfff}, + { 0x42554, 1, 0x1f, 0x924}, + { 0x42558, 1, 0x1f, 0xfff}, + { 0x4255c, 1, 0x1f, 0x924}, + { 0x42568, 2, 0x1f, 0x924}, + { 0x42640, 5, 0x1c, 0x924}, + { 0x42800, 1, 0x1f, 0x924}, + { 0x50000, 1, 0x1f, 0x1fff}, + { 0x50004, 19, 0x1f, 0x924}, + { 0x50050, 8, 0x1f, 0x93c}, + { 0x50070, 60, 0x1f, 0x924}, + { 0x50160, 8, 0x1f, 0xfff}, + { 0x50180, 20, 0x1f, 0x924}, + { 0x501e0, 2, 0x1f, 0x1fff}, + { 0x501ec, 1, 0x1f, 0x1fff}, + { 0x501f0, 4, 0x1e, 0x924}, + { 0x50200, 1, 0x1f, 0x924}, + { 0x50204, 1, 0x1f, 0xfff}, + { 0x5020c, 2, 0x1f, 0xfff}, + { 0x50214, 2, 0x1f, 0x924}, + { 0x5021c, 1, 0x1f, 0xfff}, + { 0x50220, 2, 0x1f, 0x924}, + { 0x50228, 6, 0x1e, 0x924}, + { 0x50240, 1, 0x1f, 0x924}, + { 0x50280, 1, 0x1f, 0x924}, + { 0x50300, 1, 0x1c, 0x924}, + { 0x5030c, 1, 0x1c, 0x924}, + { 0x50318, 1, 0x1c, 0x934}, + { 0x5031c, 1, 0x1c, 0x924}, + { 0x50320, 2, 0x1c, 0x934}, + { 0x50330, 1, 0x10, 0x924}, + { 0x52000, 1, 0x1f, 0x924}, + { 0x54000, 1, 0x1f, 0x93c}, + { 0x54004, 255, 0x1f, 0x30}, + { 0x54400, 1, 0x1f, 0x38}, + { 0x54404, 255, 0x1f, 0x30}, + { 0x54800, 1, 0x1f, 0x38}, + { 0x54804, 255, 0x1f, 0x30}, + { 0x54c00, 1, 0x1f, 0x38}, + { 0x54c04, 255, 0x1f, 0x30}, + { 0x55000, 1, 0x1f, 0x38}, + { 0x55004, 255, 0x1f, 0x30}, + { 0x55400, 1, 0x1f, 0x38}, + { 0x55404, 255, 0x1f, 0x30}, + { 0x55800, 1, 0x1f, 0x38}, + { 0x55804, 255, 0x1f, 0x30}, + { 0x55c00, 1, 0x1f, 0x38}, + { 0x55c04, 255, 0x1f, 0x30}, + { 0x56000, 1, 0x1f, 0x38}, + { 0x56004, 255, 0x1f, 0x30}, + { 0x56400, 1, 0x1f, 0x38}, + { 0x56404, 255, 0x1f, 0x30}, + { 0x56800, 1, 0x1f, 0x38}, + { 0x56804, 255, 0x1f, 0x30}, + { 0x56c00, 1, 0x1f, 0x38}, + { 0x56c04, 255, 0x1f, 0x30}, + { 0x57000, 1, 0x1f, 0x38}, + { 0x57004, 255, 0x1f, 0x30}, + { 0x58000, 1, 0x1f, 0x934}, + { 0x58004, 8191, 0x3, 0x30}, + { 0x60000, 26, 0x1f, 0x924}, + { 0x60068, 8, 0x3, 0x924}, + { 0x60088, 2, 0x1f, 0x924}, + { 0x60090, 1, 0x1f, 0xfff}, + { 0x60094, 9, 0x1f, 0x924}, + { 0x600b8, 9, 0x3, 0x924}, + { 0x600dc, 1, 0x1f, 0x924}, + { 0x600e0, 5, 0x3, 0x924}, + { 0x600f4, 1, 0x7, 0x924}, + { 0x600f8, 1, 0x3, 0x924}, + { 0x600fc, 8, 0x1f, 0x924}, + { 0x6012c, 2, 0x1f, 0x1fff}, + { 0x60138, 1, 0x1f, 0x1fff}, + { 0x6013c, 24, 0x2, 0x924}, + { 0x6019c, 2, 0x1c, 0x924}, + { 0x601ac, 18, 0x1c, 0x924}, + { 0x60200, 1, 0x1f, 0xb6d}, + { 0x60204, 2, 0x1f, 0x249}, + { 0x60210, 13, 0x1c, 0x924}, + { 0x60244, 16, 0x10, 0x924}, + { 0x61000, 1, 0x1f, 0xb6d}, + { 0x61004, 511, 0x1f, 0x249}, + { 0x61800, 512, 0x18, 0x249}, + { 0x70000, 8, 0x1f, 0xb6d}, + { 0x70020, 8184, 0x1f, 0x249}, + { 0x78000, 8192, 0x18, 0x249}, + { 0x85000, 3, 0x1f, 0x1000}, + { 0x8501c, 7, 0x1f, 0x1000}, + { 0x85048, 1, 0x1f, 0x1000}, + { 0x85200, 32, 0x1f, 0x1000}, + { 0xa0000, 16384, 0x3, 0x1000}, + { 0xb0000, 16384, 0x2, 0x1000}, + { 0xc1000, 7, 0x1f, 0x924}, + { 0xc102c, 2, 0x1f, 0x1fff}, + { 0xc1038, 1, 0x1f, 0x1fff}, + { 0xc103c, 2, 0x1c, 0x924}, + { 0xc1800, 2, 0x1f, 0x924}, + { 0xc2000, 164, 0x1f, 0x924}, + { 0xc22b0, 2, 0x1f, 0x1fff}, + { 0xc22bc, 1, 0x1f, 0x1fff}, + { 0xc22c0, 5, 0x1c, 0x924}, + { 0xc22d8, 4, 0x1c, 0x924}, + { 0xc2400, 49, 0x1f, 0x924}, + { 0xc24c8, 32, 0x1f, 0x924}, + { 0xc2548, 1, 0x1f, 0xfff}, + { 0xc254c, 1, 0x1f, 0x924}, + { 0xc2550, 1, 0x1f, 0xfff}, + { 0xc2554, 1, 0x1f, 0x924}, + { 0xc2558, 1, 0x1f, 0xfff}, + { 0xc255c, 1, 0x1f, 0x924}, + { 0xc2568, 2, 0x1f, 0x924}, + { 0xc2600, 1, 0x1f, 0x924}, + { 0xc4000, 165, 0x1f, 0x924}, + { 0xc42b4, 2, 0x1f, 0x1fff}, + { 0xc42c0, 1, 0x1f, 0x1fff}, + { 0xc42d8, 2, 0x1c, 0x924}, + { 0xc42e0, 7, 0x1e, 0x924}, + { 0xc42fc, 1, 0x1c, 0x924}, + { 0xc4400, 51, 0x1f, 0x924}, + { 0xc44d0, 32, 0x1f, 0x924}, + { 0xc4550, 1, 0x1f, 0xfff}, + { 0xc4554, 1, 0x1f, 0x924}, + { 0xc4558, 1, 0x1f, 0xfff}, + { 0xc455c, 1, 0x1f, 0x924}, + { 0xc4560, 1, 0x1f, 0xfff}, + { 0xc4564, 1, 0x1f, 0x924}, + { 0xc4570, 2, 0x1f, 0x924}, + { 0xc4578, 5, 0x1c, 0x924}, + { 0xc4600, 1, 0x1f, 0x924}, + { 0xd0000, 19, 0x1f, 0x924}, + { 0xd004c, 8, 0x1f, 0x1927}, + { 0xd006c, 64, 0x1f, 0x924}, + { 0xd016c, 8, 0x1f, 0xfff}, + { 0xd018c, 19, 0x1f, 0x924}, + { 0xd01e8, 2, 0x1f, 0x1fff}, + { 0xd01f4, 1, 0x1f, 0x1fff}, + { 0xd01fc, 1, 0x1c, 0x924}, + { 0xd0200, 1, 0x1f, 0x924}, + { 0xd0204, 1, 0x1f, 0xfff}, + { 0xd020c, 3, 0x1f, 0xfff}, + { 0xd0218, 4, 0x1f, 0x924}, + { 0xd0228, 18, 0x1e, 0x924}, + { 0xd0280, 1, 0x1f, 0x924}, + { 0xd0300, 1, 0x1f, 0x924}, + { 0xd0400, 1, 0x1f, 0x924}, + { 0xd0818, 1, 0x10, 0x924}, + { 0xd4000, 1, 0x1f, 0x1927}, + { 0xd4004, 255, 0x1f, 0x6}, + { 0xd4400, 1, 0x1f, 0x1007}, + { 0xd4404, 255, 0x1f, 0x6}, + { 0xd4800, 1, 0x1f, 0x1007}, + { 0xd4804, 255, 0x1f, 0x6}, + { 0xd4c00, 1, 0x1f, 0x1007}, + { 0xd4c04, 255, 0x1f, 0x6}, + { 0xd5000, 1, 0x1f, 0x1007}, + { 0xd5004, 255, 0x1f, 0x6}, + { 0xd5400, 1, 0x1f, 0x1007}, + { 0xd5404, 255, 0x1f, 0x6}, + { 0xd5800, 1, 0x1f, 0x1007}, + { 0xd5804, 255, 0x1f, 0x6}, + { 0xd5c00, 1, 0x1f, 0x1007}, + { 0xd5c04, 255, 0x1f, 0x6}, + { 0xd6000, 1, 0x1f, 0x1007}, + { 0xd6004, 255, 0x1f, 0x6}, + { 0xd6400, 1, 0x1f, 0x1007}, + { 0xd6404, 255, 0x1f, 0x6}, + { 0xd8000, 1, 0x1f, 0x1927}, + { 0xd8004, 255, 0x1f, 0x6}, + { 0xd8400, 1, 0x1f, 0x1007}, + { 0xd8404, 255, 0x1f, 0x6}, + { 0xd8800, 1, 0x1f, 0x1007}, + { 0xd8804, 255, 0x1f, 0x6}, + { 0xd8c00, 1, 0x1f, 0x1007}, + { 0xd8c04, 255, 0x1f, 0x6}, + { 0xd9000, 1, 0x1f, 0x1007}, + { 0xd9004, 255, 0x1f, 0x6}, + { 0xd9400, 1, 0x1f, 0x1007}, + { 0xd9404, 255, 0x1f, 0x6}, + { 0xd9800, 1, 0x1f, 0x1007}, + { 0xd9804, 255, 0x1f, 0x6}, + { 0xd9c00, 1, 0x1f, 0x1007}, + { 0xd9c04, 255, 0x1f, 0x6}, + { 0xda000, 1, 0x1f, 0x1007}, + { 0xda004, 255, 0x1f, 0x6}, + { 0xda400, 1, 0x1f, 0x1007}, + { 0xda404, 255, 0x1f, 0x6}, + { 0xda800, 1, 0x1f, 0x1007}, + { 0xda804, 255, 0x1f, 0x6}, + { 0xdac00, 1, 0x1f, 0x1007}, + { 0xdac04, 255, 0x1f, 0x6}, + { 0xdb000, 1, 0x1f, 0x1007}, + { 0xdb004, 255, 0x1f, 0x6}, + { 0xdb400, 1, 0x1f, 0x1007}, + { 0xdb404, 255, 0x1f, 0x6}, + { 0xdb800, 1, 0x1f, 0x1007}, + { 0xdb804, 255, 0x1f, 0x6}, + { 0xdbc00, 1, 0x1f, 0x1007}, + { 0xdbc04, 255, 0x1f, 0x6}, + { 0xdc000, 1, 0x1f, 0x1007}, + { 0xdc004, 255, 0x1f, 0x6}, + { 0xdc400, 1, 0x1f, 0x1007}, + { 0xdc404, 255, 0x1f, 0x6}, + { 0xdc800, 1, 0x1f, 0x1007}, + { 0xdc804, 255, 0x1f, 0x6}, + { 0xdcc00, 1, 0x1f, 0x1007}, + { 0xdcc04, 255, 0x1f, 0x6}, + { 0xdd000, 1, 0x1f, 0x1007}, + { 0xdd004, 255, 0x1f, 0x6}, + { 0xdd400, 1, 0x1f, 0x1007}, + { 0xdd404, 255, 0x1f, 0x6}, + { 0xdd800, 1, 0x1f, 0x1007}, + { 0xdd804, 255, 0x1f, 0x6}, + { 0xddc00, 1, 0x1f, 0x1007}, + { 0xddc04, 255, 0x1f, 0x6}, + { 0xde000, 1, 0x1f, 0x1007}, + { 0xde004, 255, 0x1f, 0x6}, + { 0xde400, 1, 0x1f, 0x1007}, + { 0xde404, 255, 0x1f, 0x6}, + { 0xde800, 1, 0x1f, 0x1007}, + { 0xde804, 255, 0x1f, 0x6}, + { 0xdec00, 1, 0x1f, 0x1007}, + { 0xdec04, 255, 0x1f, 0x6}, + { 0xdf000, 1, 0x1f, 0x1007}, + { 0xdf004, 255, 0x1f, 0x6}, + { 0xdf400, 1, 0x1f, 0x1007}, + { 0xdf404, 255, 0x1f, 0x6}, + { 0xdf800, 1, 0x1f, 0x1007}, + { 0xdf804, 255, 0x1f, 0x6}, + { 0xdfc00, 1, 0x1f, 0x1007}, + { 0xdfc04, 255, 0x1f, 0x6}, + { 0xe0000, 21, 0x1f, 0x924}, + { 0xe0054, 8, 0x1f, 0xf24}, + { 0xe0074, 49, 0x1f, 0x924}, + { 0xe0138, 1, 0x3, 0x924}, + { 0xe013c, 6, 0x1f, 0x924}, + { 0xe0154, 8, 0x1f, 0xfff}, + { 0xe0174, 21, 0x1f, 0x924}, + { 0xe01d8, 2, 0x1f, 0x1fff}, + { 0xe01e4, 1, 0x1f, 0x1fff}, + { 0xe01f4, 1, 0x4, 0x924}, + { 0xe01f8, 1, 0x1c, 0x924}, + { 0xe0200, 1, 0x1f, 0x924}, + { 0xe0204, 1, 0x1f, 0xfff}, + { 0xe020c, 2, 0x1f, 0xfff}, + { 0xe0214, 2, 0x1f, 0x924}, + { 0xe021c, 2, 0x1f, 0xfff}, + { 0xe0224, 2, 0x1f, 0x924}, + { 0xe022c, 18, 0x1e, 0x924}, + { 0xe0280, 1, 0x1f, 0x924}, + { 0xe0300, 1, 0x1f, 0x924}, + { 0xe0400, 1, 0x10, 0x924}, + { 0xe1000, 1, 0x1f, 0x924}, + { 0xe2000, 1, 0x1f, 0xf24}, + { 0xe2004, 255, 0x1f, 0xc00}, + { 0xe2400, 1, 0x1f, 0xe00}, + { 0xe2404, 255, 0x1f, 0xc00}, + { 0xe2800, 1, 0x1f, 0xe00}, + { 0xe2804, 255, 0x1f, 0xc00}, + { 0xe2c00, 1, 0x1f, 0xe00}, + { 0xe2c04, 255, 0x1f, 0xc00}, + { 0xe3000, 1, 0x1f, 0xe00}, + { 0xe3004, 255, 0x1f, 0xc00}, + { 0xe3400, 1, 0x1f, 0xe00}, + { 0xe3404, 255, 0x1f, 0xc00}, + { 0xe3800, 1, 0x1f, 0xe00}, + { 0xe3804, 255, 0x1f, 0xc00}, + { 0xe3c00, 1, 0x1f, 0xe00}, + { 0xe3c04, 255, 0x1f, 0xc00}, + { 0xf0000, 1, 0x1f, 0xf24}, + { 0xf0004, 255, 0x1f, 0xc00}, + { 0xf0400, 1, 0x1f, 0xe00}, + { 0xf0404, 255, 0x1f, 0xc00}, + { 0xf0800, 1, 0x1f, 0xe00}, + { 0xf0804, 255, 0x1f, 0xc00}, + { 0xf0c00, 1, 0x1f, 0xe00}, + { 0xf0c04, 255, 0x1f, 0xc00}, + { 0xf1000, 1, 0x1f, 0xe00}, + { 0xf1004, 255, 0x1f, 0xc00}, + { 0xf1400, 1, 0x1f, 0xe00}, + { 0xf1404, 255, 0x1f, 0xc00}, + { 0xf1800, 1, 0x1f, 0xe00}, + { 0xf1804, 255, 0x1f, 0xc00}, + { 0xf1c00, 1, 0x1f, 0xe00}, + { 0xf1c04, 255, 0x1f, 0xc00}, + { 0xf2000, 1, 0x1f, 0xe00}, + { 0xf2004, 255, 0x1f, 0xc00}, + { 0xf2400, 1, 0x1f, 0xe00}, + { 0xf2404, 255, 0x1f, 0xc00}, + { 0xf2800, 1, 0x1f, 0xe00}, + { 0xf2804, 255, 0x1f, 0xc00}, + { 0xf2c00, 1, 0x1f, 0xe00}, + { 0xf2c04, 255, 0x1f, 0xc00}, + { 0xf3000, 1, 0x1f, 0xe00}, + { 0xf3004, 255, 0x1f, 0xc00}, + { 0xf3400, 1, 0x1f, 0xe00}, + { 0xf3404, 255, 0x1f, 0xc00}, + { 0xf3800, 1, 0x1f, 0xe00}, + { 0xf3804, 255, 0x1f, 0xc00}, + { 0xf3c00, 1, 0x1f, 0xe00}, + { 0xf3c04, 255, 0x1f, 0xc00}, + { 0xf4000, 1, 0x1f, 0xe00}, + { 0xf4004, 255, 0x1f, 0xc00}, + { 0xf4400, 1, 0x1f, 0xe00}, + { 0xf4404, 255, 0x1f, 0xc00}, + { 0xf4800, 1, 0x1f, 0xe00}, + { 0xf4804, 255, 0x1f, 0xc00}, + { 0xf4c00, 1, 0x1f, 0xe00}, + { 0xf4c04, 255, 0x1f, 0xc00}, + { 0xf5000, 1, 0x1f, 0xe00}, + { 0xf5004, 255, 0x1f, 0xc00}, + { 0xf5400, 1, 0x1f, 0xe00}, + { 0xf5404, 255, 0x1f, 0xc00}, + { 0xf5800, 1, 0x1f, 0xe00}, + { 0xf5804, 255, 0x1f, 0xc00}, + { 0xf5c00, 1, 0x1f, 0xe00}, + { 0xf5c04, 255, 0x1f, 0xc00}, + { 0xf6000, 1, 0x1f, 0xe00}, + { 0xf6004, 255, 0x1f, 0xc00}, + { 0xf6400, 1, 0x1f, 0xe00}, + { 0xf6404, 255, 0x1f, 0xc00}, + { 0xf6800, 1, 0x1f, 0xe00}, + { 0xf6804, 255, 0x1f, 0xc00}, + { 0xf6c00, 1, 0x1f, 0xe00}, + { 0xf6c04, 255, 0x1f, 0xc00}, + { 0xf7000, 1, 0x1f, 0xe00}, + { 0xf7004, 255, 0x1f, 0xc00}, + { 0xf7400, 1, 0x1f, 0xe00}, + { 0xf7404, 255, 0x1f, 0xc00}, + { 0xf7800, 1, 0x1f, 0xe00}, + { 0xf7804, 255, 0x1f, 0xc00}, + { 0xf7c00, 1, 0x1f, 0xe00}, + { 0xf7c04, 255, 0x1f, 0xc00}, + { 0xf8000, 1, 0x1f, 0xe00}, + { 0xf8004, 255, 0x1f, 0xc00}, + { 0xf8400, 1, 0x1f, 0xe00}, + { 0xf8404, 255, 0x1f, 0xc00}, + { 0xf8800, 1, 0x1f, 0xe00}, + { 0xf8804, 255, 0x1f, 0xc00}, + { 0xf8c00, 1, 0x1f, 0xe00}, + { 0xf8c04, 255, 0x1f, 0xc00}, + { 0xf9000, 1, 0x1f, 0xe00}, + { 0xf9004, 255, 0x1f, 0xc00}, + { 0xf9400, 1, 0x1f, 0xe00}, + { 0xf9404, 255, 0x1f, 0xc00}, + { 0xf9800, 1, 0x1f, 0xe00}, + { 0xf9804, 255, 0x1f, 0xc00}, + { 0xf9c00, 1, 0x1f, 0xe00}, + { 0xf9c04, 255, 0x1f, 0xc00}, + { 0xfa000, 1, 0x1f, 0xe00}, + { 0xfa004, 255, 0x1f, 0xc00}, + { 0xfa400, 1, 0x1f, 0xe00}, + { 0xfa404, 255, 0x1f, 0xc00}, + { 0xfa800, 1, 0x1f, 0xe00}, + { 0xfa804, 255, 0x1f, 0xc00}, + { 0xfac00, 1, 0x1f, 0xe00}, + { 0xfac04, 255, 0x1f, 0xc00}, + { 0xfb000, 1, 0x1f, 0xe00}, + { 0xfb004, 255, 0x1f, 0xc00}, + { 0xfb400, 1, 0x1f, 0xe00}, + { 0xfb404, 255, 0x1f, 0xc00}, + { 0xfb800, 1, 0x1f, 0xe00}, + { 0xfb804, 255, 0x1f, 0xc00}, + { 0xfbc00, 1, 0x1f, 0xe00}, + { 0xfbc04, 255, 0x1f, 0xc00}, + { 0xfc000, 1, 0x1f, 0xe00}, + { 0xfc004, 255, 0x1f, 0xc00}, + { 0xfc400, 1, 0x1f, 0xe00}, + { 0xfc404, 255, 0x1f, 0xc00}, + { 0xfc800, 1, 0x1f, 0xe00}, + { 0xfc804, 255, 0x1f, 0xc00}, + { 0xfcc00, 1, 0x1f, 0xe00}, + { 0xfcc04, 255, 0x1f, 0xc00}, + { 0xfd000, 1, 0x1f, 0xe00}, + { 0xfd004, 255, 0x1f, 0xc00}, + { 0xfd400, 1, 0x1f, 0xe00}, + { 0xfd404, 255, 0x1f, 0xc00}, + { 0xfd800, 1, 0x1f, 0xe00}, + { 0xfd804, 255, 0x1f, 0xc00}, + { 0xfdc00, 1, 0x1f, 0xe00}, + { 0xfdc04, 255, 0x1f, 0xc00}, + { 0xfe000, 1, 0x1f, 0xe00}, + { 0xfe004, 255, 0x1f, 0xc00}, + { 0xfe400, 1, 0x1f, 0xe00}, + { 0xfe404, 255, 0x1f, 0xc00}, + { 0xfe800, 1, 0x1f, 0xe00}, + { 0xfe804, 255, 0x1f, 0xc00}, + { 0xfec00, 1, 0x1f, 0xe00}, + { 0xfec04, 255, 0x1f, 0xc00}, + { 0xff000, 1, 0x1f, 0xe00}, + { 0xff004, 255, 0x1f, 0xc00}, + { 0xff400, 1, 0x1f, 0xe00}, + { 0xff404, 255, 0x1f, 0xc00}, + { 0xff800, 1, 0x1f, 0xe00}, + { 0xff804, 255, 0x1f, 0xc00}, + { 0xffc00, 1, 0x1f, 0xe00}, + { 0xffc04, 255, 0x1f, 0xc00}, + { 0x101000, 5, 0x1f, 0x924}, + { 0x101014, 1, 0x1f, 0xfff}, + { 0x101018, 6, 0x1f, 0x924}, + { 0x101040, 2, 0x1f, 0x1fff}, + { 0x10104c, 1, 0x1f, 0x1fff}, + { 0x101050, 1, 0x1e, 0x924}, + { 0x101054, 3, 0x1c, 0x924}, + { 0x101100, 1, 0x1f, 0x924}, + { 0x101800, 8, 0x1f, 0x924}, + { 0x102000, 18, 0x1f, 0x924}, + { 0x102058, 2, 0x1f, 0x1fff}, + { 0x102064, 1, 0x1f, 0x1fff}, + { 0x102068, 6, 0x1c, 0x924}, + { 0x102080, 16, 0x1f, 0xfff}, + { 0x1020c0, 1, 0x1f, 0x924}, + { 0x1020c8, 8, 0x2, 0x924}, + { 0x1020e8, 9, 0x1c, 0x924}, + { 0x102400, 1, 0x1f, 0x924}, + { 0x103000, 1, 0x1f, 0x924}, + { 0x103004, 2, 0x1f, 0xfff}, + { 0x10300c, 23, 0x1f, 0x924}, + { 0x103088, 2, 0x1f, 0x1fff}, + { 0x103094, 1, 0x1f, 0x1fff}, + { 0x103098, 1, 0x1e, 0x924}, + { 0x10309c, 2, 0x1e, 0xfff}, + { 0x1030a4, 2, 0x1e, 0x924}, + { 0x1030ac, 2, 0x1c, 0x924}, + { 0x1030b4, 1, 0x4, 0x924}, + { 0x1030b8, 2, 0x1c, 0xfff}, + { 0x1030c0, 3, 0x1c, 0x924}, + { 0x1030cc, 1, 0x1c, 0xfff}, + { 0x1030d0, 1, 0x1c, 0x924}, + { 0x1030d8, 2, 0x1c, 0x924}, + { 0x1030e0, 1, 0x1c, 0xfff}, + { 0x1030e4, 5, 0x1c, 0x924}, + { 0x103400, 136, 0x1c, 0x1fff}, + { 0x103800, 8, 0x1f, 0x924}, + { 0x104000, 1, 0x1f, 0x924}, + { 0x104004, 1, 0x1f, 0xfff}, + { 0x104008, 4, 0x1f, 0x924}, + { 0x104018, 1, 0x1f, 0xfff}, + { 0x10401c, 1, 0x1f, 0x924}, + { 0x104020, 1, 0x1f, 0xfff}, + { 0x104024, 6, 0x1f, 0x924}, + { 0x10403c, 1, 0x1f, 0xfff}, + { 0x104040, 47, 0x1f, 0x924}, + { 0x10410c, 2, 0x1f, 0x1fff}, + { 0x104118, 1, 0x1f, 0x1fff}, + { 0x10411c, 16, 0x1c, 0x924}, + { 0x104200, 17, 0x1f, 0x924}, + { 0x104400, 1, 0x1f, 0x1fff}, + { 0x104404, 63, 0x1f, 0xfff}, + { 0x104500, 192, 0x1f, 0xdb6}, + { 0x104800, 1, 0x1f, 0x1fff}, + { 0x104804, 63, 0x1f, 0xfff}, + { 0x104900, 192, 0x1f, 0xdb6}, + { 0x105000, 4, 0x1f, 0x1fff}, + { 0x105010, 252, 0x1f, 0xfff}, + { 0x105400, 768, 0x1f, 0xdb6}, + { 0x107000, 7, 0x1c, 0x924}, + { 0x10701c, 1, 0x18, 0x924}, + { 0x108000, 33, 0x3, 0x924}, + { 0x1080ac, 5, 0x2, 0x924}, + { 0x108100, 5, 0x3, 0x924}, + { 0x108120, 5, 0x3, 0x924}, + { 0x108200, 74, 0x3, 0x924}, + { 0x108400, 74, 0x3, 0x924}, + { 0x108800, 152, 0x3, 0x924}, + { 0x110000, 111, 0x1c, 0x924}, + { 0x1101cc, 2, 0x1c, 0x1fff}, + { 0x1101d8, 1, 0x1c, 0x1fff}, + { 0x1101dc, 1, 0x18, 0x924}, + { 0x110200, 4, 0x1c, 0x924}, + { 0x120000, 92, 0x1f, 0x924}, + { 0x120170, 2, 0x3, 0x924}, + { 0x120178, 14, 0x1f, 0x924}, + { 0x1201b0, 2, 0x1f, 0xfff}, + { 0x1201b8, 93, 0x1f, 0x924}, + { 0x12032c, 1, 0x1f, 0xfff}, + { 0x120330, 15, 0x1f, 0x924}, + { 0x12036c, 3, 0x1f, 0xfff}, + { 0x120378, 36, 0x1f, 0x924}, + { 0x120408, 2, 0x1f, 0xfff}, + { 0x120410, 1, 0x1f, 0x924}, + { 0x120414, 15, 0x1f, 0xfff}, + { 0x120450, 10, 0x1f, 0x924}, + { 0x120478, 2, 0x1f, 0xfff}, + { 0x120480, 43, 0x1f, 0x924}, + { 0x12052c, 1, 0x1f, 0xfff}, + { 0x120530, 5, 0x1f, 0x924}, + { 0x120544, 4, 0x3, 0x924}, + { 0x120554, 4, 0x1f, 0x924}, + { 0x120564, 2, 0x1f, 0xfff}, + { 0x12057c, 2, 0x1f, 0x1fff}, + { 0x120588, 3, 0x1f, 0x1fff}, + { 0x120598, 1, 0x1f, 0x1fff}, + { 0x12059c, 22, 0x1e, 0x924}, + { 0x1205f4, 1, 0x6, 0x924}, + { 0x1205f8, 4, 0x1c, 0x924}, + { 0x120618, 1, 0x1c, 0x924}, + { 0x12061c, 31, 0x1e, 0x924}, + { 0x120698, 3, 0x1c, 0x924}, + { 0x1206a4, 1, 0x4, 0x924}, + { 0x1206a8, 1, 0x1c, 0x924}, + { 0x1206b0, 38, 0x1c, 0x924}, + { 0x120748, 1, 0x1c, 0xfff}, + { 0x12074c, 11, 0x1c, 0x924}, + { 0x120778, 2, 0x1c, 0xfff}, + { 0x120780, 23, 0x1c, 0x924}, + { 0x1207dc, 1, 0x4, 0x924}, + { 0x1207fc, 1, 0x1c, 0x924}, + { 0x12080c, 2, 0x1f, 0xfff}, + { 0x120814, 1, 0x1f, 0x924}, + { 0x120818, 1, 0x1f, 0xfff}, + { 0x12081c, 1, 0x1f, 0x924}, + { 0x120820, 1, 0x1f, 0xfff}, + { 0x120824, 1, 0x1f, 0x924}, + { 0x120828, 1, 0x1f, 0xfff}, + { 0x12082c, 1, 0x1f, 0x924}, + { 0x120830, 1, 0x1f, 0xfff}, + { 0x120834, 1, 0x1f, 0x924}, + { 0x120838, 1, 0x1f, 0xfff}, + { 0x12083c, 1, 0x1f, 0x924}, + { 0x120840, 1, 0x1f, 0xfff}, + { 0x120844, 1, 0x1f, 0x924}, + { 0x120848, 1, 0x1f, 0xfff}, + { 0x12084c, 1, 0x1f, 0x924}, + { 0x120850, 1, 0x1f, 0xfff}, + { 0x120854, 1, 0x1f, 0x924}, + { 0x120858, 1, 0x1f, 0xfff}, + { 0x12085c, 1, 0x1f, 0x924}, + { 0x120860, 1, 0x1f, 0xfff}, + { 0x120864, 1, 0x1f, 0x924}, + { 0x120868, 1, 0x1f, 0xfff}, + { 0x12086c, 1, 0x1f, 0x924}, + { 0x120870, 1, 0x1f, 0xfff}, + { 0x120874, 1, 0x1f, 0x924}, + { 0x120878, 1, 0x1f, 0xfff}, + { 0x12087c, 1, 0x1f, 0x924}, + { 0x120880, 1, 0x1f, 0xfff}, + { 0x120884, 1, 0x1f, 0x924}, + { 0x120888, 1, 0x1f, 0xfff}, + { 0x12088c, 1, 0x1f, 0x924}, + { 0x120890, 1, 0x1f, 0xfff}, + { 0x120894, 1, 0x1f, 0x924}, + { 0x120898, 1, 0x1f, 0xfff}, + { 0x12089c, 1, 0x1f, 0x924}, + { 0x1208a0, 1, 0x1f, 0xfff}, + { 0x1208a4, 1, 0x1f, 0x924}, + { 0x1208a8, 1, 0x1f, 0xfff}, + { 0x1208ac, 1, 0x1f, 0x924}, + { 0x1208b0, 1, 0x1f, 0xfff}, + { 0x1208b4, 1, 0x1f, 0x924}, + { 0x1208b8, 1, 0x1f, 0xfff}, + { 0x1208bc, 1, 0x1f, 0x924}, + { 0x1208c0, 1, 0x1f, 0xfff}, + { 0x1208c4, 1, 0x1f, 0x924}, + { 0x1208c8, 1, 0x1f, 0xfff}, + { 0x1208cc, 1, 0x1f, 0x924}, + { 0x1208d0, 1, 0x1f, 0xfff}, + { 0x1208d4, 1, 0x1f, 0x924}, + { 0x1208d8, 1, 0x1f, 0xfff}, + { 0x1208dc, 1, 0x1f, 0x924}, + { 0x1208e0, 1, 0x1f, 0xfff}, + { 0x1208e4, 1, 0x1f, 0x924}, + { 0x1208e8, 1, 0x1f, 0xfff}, + { 0x1208ec, 1, 0x1f, 0x924}, + { 0x1208f0, 1, 0x1f, 0xfff}, + { 0x1208f4, 1, 0x1f, 0x924}, + { 0x1208f8, 1, 0x1f, 0xfff}, + { 0x1208fc, 1, 0x1f, 0x924}, + { 0x120900, 1, 0x1f, 0xfff}, + { 0x120904, 1, 0x1f, 0x924}, + { 0x120908, 1, 0x1f, 0xfff}, + { 0x12090c, 1, 0x1f, 0x924}, + { 0x120910, 7, 0x1c, 0x924}, + { 0x120930, 9, 0x1c, 0x924}, + { 0x12095c, 37, 0x18, 0x924}, + { 0x120a00, 2, 0x7, 0x924}, + { 0x120b00, 1, 0x18, 0x924}, + { 0x122000, 2, 0x1f, 0x924}, + { 0x122008, 2046, 0x1, 0x924}, + { 0x128000, 6144, 0x1e, 0x924}, + { 0x130000, 1, 0x1c, 0x1fff}, + { 0x130004, 11, 0x1c, 0x924}, + { 0x130030, 1, 0x1c, 0xfff}, + { 0x130034, 6, 0x1c, 0x924}, + { 0x13004c, 3, 0x1c, 0xfff}, + { 0x130058, 3, 0x1c, 0x924}, + { 0x130064, 2, 0x1c, 0xfff}, + { 0x13006c, 8, 0x1c, 0x924}, + { 0x13009c, 2, 0x1c, 0x1fff}, + { 0x1300a8, 1, 0x1c, 0x1fff}, + { 0x130100, 12, 0x1c, 0x924}, + { 0x130130, 1, 0x1c, 0xfff}, + { 0x130134, 14, 0x1c, 0x924}, + { 0x13016c, 1, 0x1c, 0xfff}, + { 0x130170, 1, 0x1c, 0x924}, + { 0x130180, 1, 0x1c, 0x924}, + { 0x130200, 1, 0x1c, 0x924}, + { 0x130280, 1, 0x1c, 0x924}, + { 0x130300, 1, 0x1c, 0xfff}, + { 0x130304, 4, 0x1c, 0x924}, + { 0x130380, 1, 0x1c, 0x924}, + { 0x130400, 1, 0x1c, 0x924}, + { 0x130480, 1, 0x1c, 0xfff}, + { 0x130484, 4, 0x1c, 0x924}, + { 0x130800, 72, 0x1c, 0x924}, + { 0x131000, 136, 0x1c, 0x924}, + { 0x132000, 148, 0x1c, 0x924}, + { 0x134000, 544, 0x1c, 0x924}, + { 0x140000, 1, 0x1f, 0x924}, + { 0x140004, 9, 0xf, 0x924}, + { 0x140028, 8, 0x1f, 0x924}, + { 0x140048, 5, 0xf, 0x924}, + { 0x14005c, 2, 0xf, 0xfff}, + { 0x140064, 3, 0xf, 0x924}, + { 0x140070, 1, 0x1f, 0x924}, + { 0x140074, 10, 0xf, 0x924}, + { 0x14009c, 1, 0x1f, 0x924}, + { 0x1400a0, 5, 0xf, 0x924}, + { 0x1400b4, 7, 0x1f, 0x924}, + { 0x1400d0, 2, 0xf, 0xfff}, + { 0x1400d8, 2, 0xf, 0x924}, + { 0x1400e0, 1, 0xf, 0xfff}, + { 0x1400e4, 5, 0xf, 0x924}, + { 0x1400f8, 2, 0x1f, 0x924}, + { 0x140100, 5, 0x3, 0x924}, + { 0x140114, 5, 0xf, 0x924}, + { 0x140128, 7, 0x1f, 0x924}, + { 0x140144, 9, 0xf, 0x924}, + { 0x140168, 8, 0x1f, 0x924}, + { 0x140188, 3, 0xf, 0x924}, + { 0x140194, 13, 0x1f, 0x924}, + { 0x1401d8, 2, 0x1f, 0x1fff}, + { 0x1401e4, 1, 0x1f, 0x1fff}, + { 0x140200, 6, 0xf, 0xfff}, + { 0x1402e0, 2, 0xc, 0x924}, + { 0x1402e8, 2, 0x1c, 0x924}, + { 0x1402f0, 9, 0xc, 0x924}, + { 0x140314, 9, 0x10, 0x924}, + { 0x140338, 7, 0x10, 0xfff}, + { 0x140354, 7, 0x10, 0x924}, + { 0x140370, 7, 0x10, 0xfff}, + { 0x14038c, 14, 0x10, 0x924}, + { 0x1404b0, 14, 0x10, 0x924}, + { 0x15c000, 2, 0x1e, 0x924}, + { 0x15c008, 5, 0x2, 0x924}, + { 0x15c020, 8, 0x1c, 0x924}, + { 0x15c040, 1, 0xc, 0x924}, + { 0x15c044, 2, 0x1c, 0x924}, + { 0x15c04c, 8, 0xc, 0x924}, + { 0x15c06c, 8, 0x1c, 0x924}, + { 0x15c090, 13, 0x1c, 0x924}, + { 0x15c0c8, 24, 0x1c, 0x924}, + { 0x15c128, 2, 0xc, 0x924}, + { 0x15c130, 1, 0x1c, 0x924}, + { 0x15c138, 6, 0x1c, 0x924}, + { 0x15c150, 2, 0x18, 0x924}, + { 0x15c158, 2, 0x8, 0x924}, + { 0x15c160, 23, 0x10, 0x924}, + { 0x15c1bc, 6, 0x10, 0xfff}, + { 0x15c1d4, 23, 0x10, 0x924}, + { 0x15c230, 7, 0x10, 0xfff}, + { 0x15c24c, 90, 0x10, 0x924}, + { 0x160004, 6, 0x18, 0x924}, + { 0x16003c, 1, 0x10, 0x924}, + { 0x160040, 6, 0x18, 0x924}, + { 0x16005c, 6, 0x18, 0x924}, + { 0x160074, 1, 0x10, 0x924}, + { 0x160078, 2, 0x18, 0x924}, + { 0x160300, 8, 0x18, 0x924}, + { 0x160330, 6, 0x18, 0x924}, + { 0x160404, 6, 0x18, 0x924}, + { 0x16043c, 1, 0x10, 0x924}, + { 0x160440, 6, 0x18, 0x924}, + { 0x16045c, 6, 0x18, 0x924}, + { 0x160474, 1, 0x10, 0x924}, + { 0x160478, 2, 0x18, 0x924}, + { 0x160700, 8, 0x18, 0x924}, + { 0x160730, 6, 0x18, 0x924}, + { 0x161000, 7, 0x1f, 0x924}, + { 0x16102c, 2, 0x1f, 0x1fff}, + { 0x161038, 1, 0x1f, 0x1fff}, + { 0x16103c, 2, 0x1c, 0x924}, + { 0x161800, 2, 0x1f, 0x924}, + { 0x162000, 54, 0x18, 0x924}, + { 0x162200, 60, 0x18, 0x924}, + { 0x162400, 54, 0x18, 0x924}, + { 0x162600, 60, 0x18, 0x924}, + { 0x162800, 54, 0x18, 0x924}, + { 0x162a00, 60, 0x18, 0x924}, + { 0x162c00, 54, 0x18, 0x924}, + { 0x162e00, 60, 0x18, 0x924}, + { 0x163000, 1, 0x18, 0x924}, + { 0x163008, 1, 0x18, 0x924}, + { 0x163010, 1, 0x18, 0x924}, + { 0x163018, 1, 0x18, 0x924}, + { 0x163020, 5, 0x18, 0x924}, + { 0x163038, 3, 0x18, 0x924}, + { 0x163048, 3, 0x18, 0x924}, + { 0x163058, 1, 0x18, 0x924}, + { 0x163060, 1, 0x18, 0x924}, + { 0x163068, 1, 0x18, 0x924}, + { 0x163070, 3, 0x18, 0x924}, + { 0x163080, 1, 0x18, 0x924}, + { 0x163088, 3, 0x18, 0x924}, + { 0x163098, 1, 0x18, 0x924}, + { 0x1630a0, 1, 0x18, 0x924}, + { 0x1630a8, 1, 0x18, 0x924}, + { 0x1630b0, 2, 0x10, 0x924}, + { 0x1630c0, 1, 0x18, 0x924}, + { 0x1630c8, 1, 0x18, 0x924}, + { 0x1630d0, 1, 0x18, 0x924}, + { 0x1630d8, 1, 0x18, 0x924}, + { 0x1630e0, 2, 0x18, 0x924}, + { 0x163110, 1, 0x18, 0x924}, + { 0x163120, 2, 0x18, 0x924}, + { 0x163420, 4, 0x18, 0x924}, + { 0x163438, 2, 0x18, 0x924}, + { 0x163488, 2, 0x18, 0x924}, + { 0x163520, 2, 0x18, 0x924}, + { 0x163800, 1, 0x18, 0x924}, + { 0x163808, 1, 0x18, 0x924}, + { 0x163810, 1, 0x18, 0x924}, + { 0x163818, 1, 0x18, 0x924}, + { 0x163820, 5, 0x18, 0x924}, + { 0x163838, 3, 0x18, 0x924}, + { 0x163848, 3, 0x18, 0x924}, + { 0x163858, 1, 0x18, 0x924}, + { 0x163860, 1, 0x18, 0x924}, + { 0x163868, 1, 0x18, 0x924}, + { 0x163870, 3, 0x18, 0x924}, + { 0x163880, 1, 0x18, 0x924}, + { 0x163888, 3, 0x18, 0x924}, + { 0x163898, 1, 0x18, 0x924}, + { 0x1638a0, 1, 0x18, 0x924}, + { 0x1638a8, 1, 0x18, 0x924}, + { 0x1638b0, 2, 0x10, 0x924}, + { 0x1638c0, 1, 0x18, 0x924}, + { 0x1638c8, 1, 0x18, 0x924}, + { 0x1638d0, 1, 0x18, 0x924}, + { 0x1638d8, 1, 0x18, 0x924}, + { 0x1638e0, 2, 0x18, 0x924}, + { 0x163910, 1, 0x18, 0x924}, + { 0x163920, 2, 0x18, 0x924}, + { 0x163c20, 4, 0x18, 0x924}, + { 0x163c38, 2, 0x18, 0x924}, + { 0x163c88, 2, 0x18, 0x924}, + { 0x163d20, 2, 0x18, 0x924}, + { 0x164000, 5, 0x1f, 0x924}, + { 0x164014, 2, 0x1f, 0xfff}, + { 0x16401c, 53, 0x1f, 0x924}, + { 0x164100, 2, 0x1f, 0x1fff}, + { 0x16410c, 1, 0x1f, 0x1fff}, + { 0x164110, 2, 0x1e, 0x924}, + { 0x164118, 15, 0x1c, 0x924}, + { 0x164200, 1, 0x1f, 0x924}, + { 0x164208, 1, 0x1f, 0x924}, + { 0x164210, 1, 0x1f, 0x924}, + { 0x164218, 1, 0x1f, 0x924}, + { 0x164220, 1, 0x1f, 0x924}, + { 0x164228, 1, 0x1f, 0x924}, + { 0x164230, 1, 0x1f, 0x924}, + { 0x164238, 1, 0x1f, 0x924}, + { 0x164240, 1, 0x1f, 0x924}, + { 0x164248, 1, 0x1f, 0x924}, + { 0x164250, 1, 0x1f, 0x924}, + { 0x164258, 1, 0x1f, 0x924}, + { 0x164260, 1, 0x1f, 0x924}, + { 0x164270, 2, 0x1f, 0x924}, + { 0x164280, 2, 0x1f, 0x924}, + { 0x164800, 2, 0x1f, 0x924}, + { 0x165000, 2, 0x1f, 0x924}, + { 0x166000, 164, 0x1f, 0x924}, + { 0x1662b0, 2, 0x1f, 0x1fff}, + { 0x1662bc, 1, 0x1f, 0x1fff}, + { 0x1662cc, 7, 0x1c, 0x924}, + { 0x166400, 49, 0x1f, 0x924}, + { 0x1664c8, 32, 0x1f, 0x924}, + { 0x166548, 1, 0x1f, 0xfff}, + { 0x16654c, 1, 0x1f, 0x924}, + { 0x166550, 1, 0x1f, 0xfff}, + { 0x166554, 1, 0x1f, 0x924}, + { 0x166558, 1, 0x1f, 0xfff}, + { 0x16655c, 1, 0x1f, 0x924}, + { 0x166568, 2, 0x1f, 0x924}, + { 0x166570, 5, 0x1c, 0x924}, + { 0x166800, 1, 0x1f, 0x924}, + { 0x168000, 1, 0x1f, 0xfff}, + { 0x168004, 1, 0x1f, 0x924}, + { 0x168008, 1, 0x1f, 0xfff}, + { 0x16800c, 1, 0x1f, 0x924}, + { 0x168010, 1, 0x1f, 0xfff}, + { 0x168014, 1, 0x1f, 0x924}, + { 0x168018, 1, 0x1f, 0xfff}, + { 0x16801c, 3, 0x1f, 0x924}, + { 0x168028, 2, 0x1f, 0xfff}, + { 0x168030, 10, 0x1f, 0x924}, + { 0x168058, 9, 0x1f, 0xfff}, + { 0x16807c, 106, 0x1f, 0x924}, + { 0x168224, 2, 0x3, 0x924}, + { 0x16822c, 3, 0x1f, 0x924}, + { 0x168238, 1, 0x1f, 0xfff}, + { 0x16823c, 25, 0x1f, 0x924}, + { 0x1682a0, 12, 0x3, 0x924}, + { 0x1682d0, 7, 0x1f, 0xfff}, + { 0x1682ec, 5, 0x1f, 0x924}, + { 0x168300, 2, 0x3, 0xfff}, + { 0x168308, 65, 0x1f, 0xfff}, + { 0x16840c, 1, 0x1f, 0x924}, + { 0x168410, 2, 0x1f, 0xfff}, + { 0x168418, 2, 0x3, 0x924}, + { 0x168420, 6, 0x1f, 0x924}, + { 0x168448, 2, 0x1f, 0x1fff}, + { 0x168454, 1, 0x1f, 0x1fff}, + { 0x168800, 19, 0x1f, 0x924}, + { 0x168900, 1, 0x1f, 0x924}, + { 0x168a00, 128, 0x1f, 0xfff}, + { 0x16a000, 1536, 0x1f, 0x924}, + { 0x16c000, 1536, 0x1f, 0x924}, + { 0x16e000, 16, 0x2, 0x924}, + { 0x16e040, 8, 0x1c, 0x924}, + { 0x16e100, 1, 0x2, 0x924}, + { 0x16e200, 2, 0x2, 0xfff}, + { 0x16e400, 1, 0x2, 0x924}, + { 0x16e404, 2, 0x2, 0xfff}, + { 0x16e40c, 94, 0x2, 0x924}, + { 0x16e584, 64, 0x2, 0xfff}, + { 0x16e684, 2, 0x1e, 0xfff}, + { 0x16e68c, 4, 0x2, 0xfff}, + { 0x16e69c, 8, 0x2, 0x924}, + { 0x16e6bc, 4, 0x1e, 0x924}, + { 0x16e6cc, 4, 0x2, 0x924}, + { 0x16e6e0, 2, 0x1c, 0x924}, + { 0x16e6e8, 5, 0xc, 0x924}, + { 0x16e6fc, 4, 0x1c, 0xfff}, + { 0x16e70c, 1, 0x1c, 0x924}, + { 0x16e768, 17, 0x1c, 0x924}, + { 0x16e7ac, 12, 0x10, 0xfff}, + { 0x170000, 24, 0x1f, 0x924}, + { 0x170060, 4, 0x3, 0x924}, + { 0x170070, 13, 0x1f, 0x924}, + { 0x1700a4, 1, 0x1f, 0xfff}, + { 0x1700a8, 1, 0x1f, 0x924}, + { 0x1700ac, 2, 0x1f, 0xfff}, + { 0x1700b4, 3, 0x1f, 0x924}, + { 0x1700c0, 1, 0x1f, 0xfff}, + { 0x1700c4, 44, 0x1f, 0x924}, + { 0x170184, 2, 0x1f, 0x1fff}, + { 0x170190, 1, 0x1f, 0x1fff}, + { 0x170194, 11, 0x1c, 0x924}, + { 0x1701c4, 1, 0x1c, 0x924}, + { 0x1701cc, 7, 0x1c, 0x924}, + { 0x1701e8, 1, 0x18, 0x924}, + { 0x1701ec, 1, 0x1c, 0x924}, + { 0x1701f4, 1, 0x1c, 0x924}, + { 0x170200, 4, 0x1f, 0x924}, + { 0x170214, 1, 0x1f, 0x924}, + { 0x170218, 77, 0x1c, 0x924}, + { 0x170400, 64, 0x1c, 0x924}, + { 0x178000, 1, 0x1f, 0x924}, + { 0x180000, 61, 0x1f, 0x924}, + { 0x180114, 2, 0x1f, 0x1fff}, + { 0x180120, 3, 0x1f, 0x1fff}, + { 0x180130, 1, 0x1f, 0x1fff}, + { 0x18013c, 2, 0x1e, 0x924}, + { 0x180200, 27, 0x1f, 0x924}, + { 0x18026c, 1, 0x1f, 0xfff}, + { 0x180270, 12, 0x1f, 0x924}, + { 0x1802a0, 1, 0x1f, 0xfff}, + { 0x1802a4, 17, 0x1f, 0x924}, + { 0x180340, 4, 0x1f, 0x924}, + { 0x180380, 1, 0x1c, 0x924}, + { 0x180388, 1, 0x1c, 0x924}, + { 0x180390, 1, 0x1c, 0x924}, + { 0x180398, 1, 0x1c, 0x924}, + { 0x1803a0, 5, 0x1c, 0x924}, + { 0x1803b4, 2, 0x18, 0x924}, + { 0x180400, 256, 0x3, 0xfff}, + { 0x181000, 4, 0x1f, 0x93c}, + { 0x181010, 1020, 0x1f, 0x38}, + { 0x182000, 4, 0x18, 0x924}, + { 0x1a0000, 1, 0x1f, 0x92c}, + { 0x1a0004, 5631, 0x1f, 0x8}, + { 0x1a5800, 2560, 0x1e, 0x8}, + { 0x1a8000, 1, 0x1f, 0x92c}, + { 0x1a8004, 8191, 0x1e, 0x8}, + { 0x1b0000, 1, 0x1f, 0x92c}, + { 0x1b0004, 15, 0x2, 0x8}, + { 0x1b0040, 1, 0x1e, 0x92c}, + { 0x1b0044, 239, 0x2, 0x8}, + { 0x1b0400, 1, 0x1f, 0x92c}, + { 0x1b0404, 255, 0x2, 0x8}, + { 0x1b0800, 1, 0x1f, 0x924}, + { 0x1b0840, 1, 0x1e, 0x924}, + { 0x1b0c00, 1, 0x1f, 0x1fff}, + { 0x1b1000, 1, 0x1f, 0x1fff}, + { 0x1b1040, 1, 0x1e, 0x1fff}, + { 0x1b1400, 1, 0x1f, 0x924}, + { 0x1b1440, 1, 0x1e, 0x924}, + { 0x1b1480, 1, 0x1e, 0x924}, + { 0x1b14c0, 1, 0x1e, 0x924}, + { 0x1b1800, 128, 0x1f, 0x10}, + { 0x1b1c00, 128, 0x1f, 0x10}, + { 0x1b2000, 1, 0x1f, 0xdb6}, + { 0x1b2400, 1, 0x1e, 0x92c}, + { 0x1b2404, 5631, 0x1c, 0x8}, + { 0x1b8000, 1, 0x1f, 0xfff}, + { 0x1b8040, 1, 0x1f, 0xfff}, + { 0x1b8080, 1, 0x1f, 0xfff}, + { 0x1b80c0, 1, 0x1f, 0xfff}, + { 0x1b8100, 1, 0x1f, 0x924}, + { 0x1b8140, 1, 0x1f, 0x924}, + { 0x1b8180, 1, 0x1f, 0x924}, + { 0x1b81c0, 1, 0x1f, 0x924}, + { 0x1b8200, 1, 0x1f, 0x924}, + { 0x1b8240, 1, 0x1f, 0x924}, + { 0x1b8280, 1, 0x1f, 0x924}, + { 0x1b82c0, 1, 0x1f, 0x924}, + { 0x1b8300, 1, 0x1f, 0x924}, + { 0x1b8340, 1, 0x1f, 0x924}, + { 0x1b8380, 1, 0x1f, 0x924}, + { 0x1b83c0, 1, 0x1f, 0x924}, + { 0x1b8400, 1, 0x1f, 0x924}, + { 0x1b8440, 1, 0x1f, 0x924}, + { 0x1b8480, 1, 0x1f, 0x924}, + { 0x1b84c0, 1, 0x1f, 0x924}, + { 0x1b8500, 1, 0x1f, 0x924}, + { 0x1b8540, 1, 0x1f, 0x924}, + { 0x1b8580, 1, 0x1f, 0x924}, + { 0x1b85c0, 19, 0x1c, 0x924}, + { 0x1b8800, 1, 0x1f, 0x924}, + { 0x1b8840, 1, 0x1f, 0x924}, + { 0x1b8880, 1, 0x1f, 0x924}, + { 0x1b88c0, 1, 0x1f, 0x924}, + { 0x1b8900, 1, 0x1f, 0x924}, + { 0x1b8940, 1, 0x1f, 0x924}, + { 0x1b8980, 1, 0x1f, 0x924}, + { 0x1b89c0, 1, 0x1f, 0x924}, + { 0x1b8a00, 1, 0x1f, 0x934}, + { 0x1b8a40, 1, 0x1f, 0x924}, + { 0x1b8a80, 1, 0x1f, 0x492}, + { 0x1b8ac0, 1, 0x1f, 0x924}, + { 0x1b8b00, 1, 0x1f, 0x924}, + { 0x1b8b40, 1, 0x1f, 0x924}, + { 0x1b8b80, 1, 0x1f, 0x924}, + { 0x1b8bc0, 1, 0x1f, 0x924}, + { 0x1b8c00, 1, 0x1f, 0x924}, + { 0x1b8c40, 1, 0x1f, 0x924}, + { 0x1b8c80, 1, 0x1f, 0x924}, + { 0x1b8cc0, 1, 0x1f, 0x924}, + { 0x1b8cc4, 1, 0x1c, 0x924}, + { 0x1b8d00, 1, 0x1f, 0x924}, + { 0x1b8d40, 1, 0x1f, 0x924}, + { 0x1b8d80, 1, 0x1f, 0x924}, + { 0x1b8dc0, 1, 0x1f, 0x924}, + { 0x1b8e00, 1, 0x1f, 0x924}, + { 0x1b8e40, 1, 0x1f, 0x924}, + { 0x1b8e80, 1, 0x1f, 0x924}, + { 0x1b8e84, 1, 0x1c, 0x924}, + { 0x1b8ec0, 1, 0x1e, 0x924}, + { 0x1b8f00, 1, 0x1e, 0x924}, + { 0x1b8f40, 1, 0x1e, 0x924}, + { 0x1b8f80, 1, 0x1e, 0x924}, + { 0x1b8fc0, 1, 0x1e, 0x924}, + { 0x1b8fd4, 5, 0x1c, 0x924}, + { 0x1b8fe8, 2, 0x18, 0x924}, + { 0x1b9000, 1, 0x1c, 0x924}, + { 0x1b9040, 3, 0x1c, 0x924}, + { 0x1b905c, 1, 0x18, 0x924}, + { 0x1b9064, 1, 0x10, 0x924}, + { 0x1b9080, 10, 0x10, 0x924}, + { 0x1c0000, 2, 0x1f, 0x924}, + { 0x200000, 65, 0x1f, 0x924}, + { 0x200124, 2, 0x1f, 0x1fff}, + { 0x200130, 3, 0x1f, 0x1fff}, + { 0x200140, 1, 0x1f, 0x1fff}, + { 0x20014c, 2, 0x1e, 0x924}, + { 0x200200, 27, 0x1f, 0x924}, + { 0x20026c, 1, 0x1f, 0xfff}, + { 0x200270, 12, 0x1f, 0x924}, + { 0x2002a0, 1, 0x1f, 0xfff}, + { 0x2002a4, 17, 0x1f, 0x924}, + { 0x200340, 4, 0x1f, 0x924}, + { 0x200380, 1, 0x1c, 0x924}, + { 0x200388, 1, 0x1c, 0x924}, + { 0x200390, 1, 0x1c, 0x924}, + { 0x200398, 1, 0x1c, 0x924}, + { 0x2003a0, 1, 0x1c, 0x924}, + { 0x2003a8, 2, 0x1c, 0x924}, + { 0x200400, 256, 0x3, 0xfff}, + { 0x202000, 4, 0x1f, 0x1927}, + { 0x202010, 2044, 0x1f, 0x1007}, + { 0x204000, 4, 0x18, 0x924}, + { 0x220000, 1, 0x1f, 0x925}, + { 0x220004, 5631, 0x1f, 0x1}, + { 0x225800, 2560, 0x1e, 0x1}, + { 0x228000, 1, 0x1f, 0x925}, + { 0x228004, 8191, 0x1e, 0x1}, + { 0x230000, 1, 0x1f, 0x925}, + { 0x230004, 15, 0x2, 0x1}, + { 0x230040, 1, 0x1e, 0x925}, + { 0x230044, 239, 0x2, 0x1}, + { 0x230400, 1, 0x1f, 0x925}, + { 0x230404, 255, 0x2, 0x1}, + { 0x230800, 1, 0x1f, 0x924}, + { 0x230840, 1, 0x1e, 0x924}, + { 0x230c00, 1, 0x1f, 0x924}, + { 0x231000, 1, 0x1f, 0x924}, + { 0x231040, 1, 0x1e, 0x924}, + { 0x231400, 1, 0x1f, 0x924}, + { 0x231440, 1, 0x1e, 0x924}, + { 0x231480, 1, 0x1e, 0x924}, + { 0x2314c0, 1, 0x1e, 0x924}, + { 0x231800, 128, 0x1f, 0x2}, + { 0x231c00, 128, 0x1f, 0x2}, + { 0x232000, 1, 0x1f, 0xdb6}, + { 0x232400, 1, 0x1e, 0x925}, + { 0x232404, 5631, 0x1c, 0x1}, + { 0x238000, 1, 0x1f, 0xfff}, + { 0x238040, 1, 0x1f, 0xfff}, + { 0x238080, 1, 0x1f, 0xfff}, + { 0x2380c0, 1, 0x1f, 0xfff}, + { 0x238100, 1, 0x1f, 0x924}, + { 0x238140, 1, 0x1f, 0x924}, + { 0x238180, 1, 0x1f, 0x924}, + { 0x2381c0, 1, 0x1f, 0x924}, + { 0x238200, 1, 0x1f, 0x924}, + { 0x238240, 1, 0x1f, 0x924}, + { 0x238280, 1, 0x1f, 0x924}, + { 0x2382c0, 1, 0x1f, 0x924}, + { 0x238300, 1, 0x1f, 0x924}, + { 0x238340, 1, 0x1f, 0x924}, + { 0x238380, 1, 0x1f, 0x924}, + { 0x2383c0, 1, 0x1f, 0x924}, + { 0x238400, 1, 0x1f, 0x924}, + { 0x238440, 1, 0x1f, 0x924}, + { 0x238480, 1, 0x1f, 0x924}, + { 0x2384c0, 1, 0x1f, 0x924}, + { 0x238500, 1, 0x1f, 0x924}, + { 0x238540, 1, 0x1f, 0x924}, + { 0x238580, 1, 0x1f, 0x924}, + { 0x2385c0, 19, 0x1c, 0x924}, + { 0x238800, 1, 0x1f, 0x924}, + { 0x238840, 1, 0x1f, 0x924}, + { 0x238880, 1, 0x1f, 0x924}, + { 0x2388c0, 1, 0x1f, 0x924}, + { 0x238900, 1, 0x1f, 0x924}, + { 0x238940, 1, 0x1f, 0x924}, + { 0x238980, 1, 0x1f, 0x924}, + { 0x2389c0, 1, 0x1f, 0x924}, + { 0x238a00, 1, 0x1f, 0x926}, + { 0x238a40, 1, 0x1f, 0x924}, + { 0x238a80, 1, 0x1f, 0x492}, + { 0x238ac0, 1, 0x1f, 0x924}, + { 0x238b00, 1, 0x1f, 0x924}, + { 0x238b40, 1, 0x1f, 0x924}, + { 0x238b80, 1, 0x1f, 0x924}, + { 0x238bc0, 1, 0x1f, 0x924}, + { 0x238c00, 1, 0x1f, 0x924}, + { 0x238c40, 1, 0x1f, 0x924}, + { 0x238c80, 1, 0x1f, 0x924}, + { 0x238cc0, 1, 0x1f, 0x924}, + { 0x238cc4, 1, 0x1c, 0x924}, + { 0x238d00, 1, 0x1f, 0x924}, + { 0x238d40, 1, 0x1f, 0x924}, + { 0x238d80, 1, 0x1f, 0x924}, + { 0x238dc0, 1, 0x1f, 0x924}, + { 0x238e00, 1, 0x1f, 0x924}, + { 0x238e40, 1, 0x1f, 0x924}, + { 0x238e80, 1, 0x1f, 0x924}, + { 0x238e84, 1, 0x1c, 0x924}, + { 0x238ec0, 1, 0x1e, 0x924}, + { 0x238f00, 1, 0x1e, 0x924}, + { 0x238f40, 1, 0x1e, 0x924}, + { 0x238f80, 1, 0x1e, 0x924}, + { 0x238fc0, 1, 0x1e, 0x924}, + { 0x238fd4, 5, 0x1c, 0x924}, + { 0x238fe8, 2, 0x18, 0x924}, + { 0x239000, 1, 0x1c, 0x924}, + { 0x239040, 3, 0x1c, 0x924}, + { 0x23905c, 1, 0x18, 0x924}, + { 0x239064, 1, 0x10, 0x924}, + { 0x239080, 10, 0x10, 0x924}, + { 0x240000, 2, 0x1f, 0x924}, + { 0x280000, 65, 0x1f, 0x924}, + { 0x280124, 2, 0x1f, 0x1fff}, + { 0x280130, 3, 0x1f, 0x1fff}, + { 0x280140, 1, 0x1f, 0x1fff}, + { 0x28014c, 2, 0x1e, 0x924}, + { 0x280200, 27, 0x1f, 0x924}, + { 0x28026c, 1, 0x1f, 0xfff}, + { 0x280270, 12, 0x1f, 0x924}, + { 0x2802a0, 1, 0x1f, 0xfff}, + { 0x2802a4, 17, 0x1f, 0x924}, + { 0x280340, 4, 0x1f, 0x924}, + { 0x280380, 1, 0x1c, 0x924}, + { 0x280388, 1, 0x1c, 0x924}, + { 0x280390, 1, 0x1c, 0x924}, + { 0x280398, 1, 0x1c, 0x924}, + { 0x2803a0, 1, 0x1c, 0x924}, + { 0x2803a8, 2, 0x1c, 0x924}, + { 0x280400, 256, 0x3, 0xfff}, + { 0x282000, 4, 0x1f, 0x9e4}, + { 0x282010, 2044, 0x1f, 0x1c0}, + { 0x284000, 4, 0x18, 0x924}, + { 0x2a0000, 1, 0x1f, 0x964}, + { 0x2a0004, 5631, 0x1f, 0x40}, + { 0x2a5800, 2560, 0x1e, 0x40}, + { 0x2a8000, 1, 0x1f, 0x964}, + { 0x2a8004, 8191, 0x1e, 0x40}, + { 0x2b0000, 1, 0x1f, 0x964}, + { 0x2b0004, 15, 0x2, 0x40}, + { 0x2b0040, 1, 0x1e, 0x964}, + { 0x2b0044, 239, 0x2, 0x40}, + { 0x2b0400, 1, 0x1f, 0x964}, + { 0x2b0404, 255, 0x2, 0x40}, + { 0x2b0800, 1, 0x1f, 0x924}, + { 0x2b0840, 1, 0x1e, 0x924}, + { 0x2b0c00, 1, 0x1f, 0x924}, + { 0x2b1000, 1, 0x1f, 0x924}, + { 0x2b1040, 1, 0x1e, 0x924}, + { 0x2b1400, 1, 0x1f, 0x924}, + { 0x2b1440, 1, 0x1e, 0x924}, + { 0x2b1480, 1, 0x1e, 0x924}, + { 0x2b14c0, 1, 0x1e, 0x924}, + { 0x2b1800, 128, 0x1f, 0x80}, + { 0x2b1c00, 128, 0x1f, 0x80}, + { 0x2b2000, 1, 0x1f, 0xdb6}, + { 0x2b2400, 1, 0x1e, 0x964}, + { 0x2b2404, 5631, 0x1c, 0x40}, + { 0x2b8000, 1, 0x1f, 0xfff}, + { 0x2b8040, 1, 0x1f, 0xfff}, + { 0x2b8080, 1, 0x1f, 0xfff}, + { 0x2b80c0, 1, 0x1f, 0x924}, + { 0x2b8100, 1, 0x1f, 0x924}, + { 0x2b8140, 1, 0x1f, 0x924}, + { 0x2b8180, 1, 0x1f, 0x924}, + { 0x2b81c0, 1, 0x1f, 0x924}, + { 0x2b8200, 1, 0x1f, 0x924}, + { 0x2b8240, 1, 0x1f, 0x924}, + { 0x2b8280, 1, 0x1f, 0x924}, + { 0x2b82c0, 1, 0x1f, 0x924}, + { 0x2b8300, 1, 0x1f, 0x924}, + { 0x2b8340, 1, 0x1f, 0x924}, + { 0x2b8380, 1, 0x1f, 0x924}, + { 0x2b83c0, 1, 0x1f, 0x924}, + { 0x2b8400, 1, 0x1f, 0x924}, + { 0x2b8440, 1, 0x1f, 0x924}, + { 0x2b8480, 1, 0x1f, 0x924}, + { 0x2b84c0, 1, 0x1f, 0x924}, + { 0x2b8500, 1, 0x1f, 0x924}, + { 0x2b8540, 1, 0x1f, 0x924}, + { 0x2b8580, 1, 0x1f, 0x924}, + { 0x2b85c0, 19, 0x1c, 0x924}, + { 0x2b8800, 1, 0x1f, 0x924}, + { 0x2b8840, 1, 0x1f, 0x924}, + { 0x2b8880, 1, 0x1f, 0x924}, + { 0x2b88c0, 1, 0x1f, 0x924}, + { 0x2b8900, 1, 0x1f, 0x924}, + { 0x2b8940, 1, 0x1f, 0x924}, + { 0x2b8980, 1, 0x1f, 0x924}, + { 0x2b89c0, 1, 0x1f, 0x924}, + { 0x2b8a00, 1, 0x1f, 0x9a4}, + { 0x2b8a40, 1, 0x1f, 0x924}, + { 0x2b8a80, 1, 0x1f, 0x492}, + { 0x2b8ac0, 1, 0x1f, 0x924}, + { 0x2b8b00, 1, 0x1f, 0x924}, + { 0x2b8b40, 1, 0x1f, 0x924}, + { 0x2b8b80, 1, 0x1f, 0x924}, + { 0x2b8bc0, 1, 0x1f, 0x924}, + { 0x2b8c00, 1, 0x1f, 0x924}, + { 0x2b8c40, 1, 0x1f, 0x924}, + { 0x2b8c80, 1, 0x1f, 0x924}, + { 0x2b8cc0, 1, 0x1f, 0x924}, + { 0x2b8cc4, 1, 0x1c, 0x924}, + { 0x2b8d00, 1, 0x1f, 0x924}, + { 0x2b8d40, 1, 0x1f, 0x924}, + { 0x2b8d80, 1, 0x1f, 0x924}, + { 0x2b8dc0, 1, 0x1f, 0x924}, + { 0x2b8e00, 1, 0x1f, 0x924}, + { 0x2b8e40, 1, 0x1f, 0x924}, + { 0x2b8e80, 1, 0x1f, 0x924}, + { 0x2b8e84, 1, 0x1c, 0x924}, + { 0x2b8ec0, 1, 0x1e, 0x924}, + { 0x2b8f00, 1, 0x1e, 0x924}, + { 0x2b8f40, 1, 0x1e, 0x924}, + { 0x2b8f80, 1, 0x1e, 0x924}, + { 0x2b8fc0, 1, 0x1e, 0x924}, + { 0x2b8fd4, 5, 0x1c, 0x924}, + { 0x2b8fe8, 2, 0x18, 0x924}, + { 0x2b9000, 1, 0x1c, 0x924}, + { 0x2b9040, 3, 0x1c, 0x924}, + { 0x2b905c, 1, 0x18, 0x924}, + { 0x2b9064, 1, 0x10, 0x924}, + { 0x2b9080, 10, 0x10, 0x924}, + { 0x2c0000, 2, 0x1f, 0x1fff}, + { 0x300000, 65, 0x1f, 0x924}, + { 0x300124, 2, 0x1f, 0x1fff}, + { 0x300130, 3, 0x1f, 0x1fff}, + { 0x300140, 1, 0x1f, 0x1fff}, + { 0x30014c, 2, 0x1e, 0x924}, + { 0x300200, 27, 0x1f, 0x924}, + { 0x30026c, 1, 0x1f, 0xfff}, + { 0x300270, 12, 0x1f, 0x924}, + { 0x3002a0, 1, 0x1f, 0xfff}, + { 0x3002a4, 17, 0x1f, 0x924}, + { 0x300340, 4, 0x1f, 0x924}, + { 0x300380, 1, 0x1c, 0x924}, + { 0x300388, 1, 0x1c, 0x924}, + { 0x300390, 1, 0x1c, 0x924}, + { 0x300398, 1, 0x1c, 0x924}, + { 0x3003a0, 1, 0x1c, 0x924}, + { 0x3003a8, 2, 0x1c, 0x924}, + { 0x300400, 256, 0x3, 0xfff}, + { 0x302000, 4, 0x1f, 0xf24}, + { 0x302010, 2044, 0x1f, 0xe00}, + { 0x304000, 4, 0x18, 0x924}, + { 0x320000, 1, 0x1f, 0xb24}, + { 0x320004, 5631, 0x1f, 0x200}, + { 0x325800, 2560, 0x1e, 0x200}, + { 0x328000, 1, 0x1f, 0xb24}, + { 0x328004, 8191, 0x1e, 0x200}, + { 0x330000, 1, 0x1f, 0xb24}, + { 0x330004, 15, 0x2, 0x200}, + { 0x330040, 1, 0x1e, 0xb24}, + { 0x330044, 239, 0x2, 0x200}, + { 0x330400, 1, 0x1f, 0xb24}, + { 0x330404, 255, 0x2, 0x200}, + { 0x330800, 1, 0x1f, 0x924}, + { 0x330840, 1, 0x1e, 0x924}, + { 0x330c00, 1, 0x1f, 0x924}, + { 0x331000, 1, 0x1f, 0x924}, + { 0x331040, 1, 0x1e, 0x924}, + { 0x331400, 1, 0x1f, 0x924}, + { 0x331440, 1, 0x1e, 0x924}, + { 0x331480, 1, 0x1e, 0x924}, + { 0x3314c0, 1, 0x1e, 0x924}, + { 0x331800, 128, 0x1f, 0x400}, + { 0x331c00, 128, 0x1f, 0x400}, + { 0x332000, 1, 0x1f, 0xdb6}, + { 0x332400, 1, 0x1e, 0xb24}, + { 0x332404, 5631, 0x1c, 0x200}, + { 0x338000, 1, 0x1f, 0xfff}, + { 0x338040, 1, 0x1f, 0xfff}, + { 0x338080, 1, 0x1f, 0xfff}, + { 0x3380c0, 1, 0x1f, 0xfff}, + { 0x338100, 1, 0x1f, 0x924}, + { 0x338140, 1, 0x1f, 0x924}, + { 0x338180, 1, 0x1f, 0x924}, + { 0x3381c0, 1, 0x1f, 0x924}, + { 0x338200, 1, 0x1f, 0x924}, + { 0x338240, 1, 0x1f, 0x924}, + { 0x338280, 1, 0x1f, 0x924}, + { 0x3382c0, 1, 0x1f, 0x924}, + { 0x338300, 1, 0x1f, 0x924}, + { 0x338340, 1, 0x1f, 0x924}, + { 0x338380, 1, 0x1f, 0x924}, + { 0x3383c0, 1, 0x1f, 0x924}, + { 0x338400, 1, 0x1f, 0x924}, + { 0x338440, 1, 0x1f, 0x924}, + { 0x338480, 1, 0x1f, 0x924}, + { 0x3384c0, 1, 0x1f, 0x924}, + { 0x338500, 1, 0x1f, 0x924}, + { 0x338540, 1, 0x1f, 0x924}, + { 0x338580, 1, 0x1f, 0x924}, + { 0x3385c0, 19, 0x1c, 0x924}, + { 0x338800, 1, 0x1f, 0x924}, + { 0x338840, 1, 0x1f, 0x924}, + { 0x338880, 1, 0x1f, 0x924}, + { 0x3388c0, 1, 0x1f, 0x924}, + { 0x338900, 1, 0x1f, 0x924}, + { 0x338940, 1, 0x1f, 0x924}, + { 0x338980, 1, 0x1f, 0x924}, + { 0x3389c0, 1, 0x1f, 0x924}, + { 0x338a00, 1, 0x1f, 0xd24}, + { 0x338a40, 1, 0x1f, 0x924}, + { 0x338a80, 1, 0x1f, 0x492}, + { 0x338ac0, 1, 0x1f, 0x924}, + { 0x338b00, 1, 0x1f, 0x924}, + { 0x338b40, 1, 0x1f, 0x924}, + { 0x338b80, 1, 0x1f, 0x924}, + { 0x338bc0, 1, 0x1f, 0x924}, + { 0x338c00, 1, 0x1f, 0x924}, + { 0x338c40, 1, 0x1f, 0x924}, + { 0x338c80, 1, 0x1f, 0x924}, + { 0x338cc0, 1, 0x1f, 0x924}, + { 0x338cc4, 1, 0x1c, 0x924}, + { 0x338d00, 1, 0x1f, 0x924}, + { 0x338d40, 1, 0x1f, 0x924}, + { 0x338d80, 1, 0x1f, 0x924}, + { 0x338dc0, 1, 0x1f, 0x924}, + { 0x338e00, 1, 0x1f, 0x924}, + { 0x338e40, 1, 0x1f, 0x924}, + { 0x338e80, 1, 0x1f, 0x924}, + { 0x338e84, 1, 0x1c, 0x924}, + { 0x338ec0, 1, 0x1e, 0x924}, + { 0x338f00, 1, 0x1e, 0x924}, + { 0x338f40, 1, 0x1e, 0x924}, + { 0x338f80, 1, 0x1e, 0x924}, + { 0x338fc0, 1, 0x1e, 0x924}, + { 0x338fd4, 5, 0x1c, 0x924}, + { 0x338fe8, 2, 0x18, 0x924}, + { 0x339000, 1, 0x1c, 0x924}, + { 0x339040, 3, 0x1c, 0x924}, + { 0x33905c, 1, 0x18, 0x924}, + { 0x339064, 1, 0x10, 0x924}, + { 0x339080, 10, 0x10, 0x924}, + { 0x340000, 2, 0x1f, 0x924}, + { 0x3a0000, 40960, 0x1c, 0x1000} }; -#define REGS_COUNT ARRAY_SIZE(reg_addrs) -static const struct dump_sign dump_sign_all = { 0x4e23fde1, 0x70017, 0x3a }; +#define REGS_COUNT ARRAY_SIZE(reg_addrs) -static const u32 page_vals_e2[] = { 0, 128 }; -#define PAGE_MODE_VALUES_E2 ARRAY_SIZE(page_vals_e2) +static const struct reg_addr idle_reg_addrs[] = { + { 0x2104, 1, 0x1f, 0xfff}, + { 0x2110, 2, 0x1f, 0xfff}, + { 0x211c, 8, 0x1f, 0xfff}, + { 0x2814, 1, 0x1f, 0xfff}, + { 0x281c, 2, 0x1f, 0xfff}, + { 0x2854, 1, 0x1f, 0xfff}, + { 0x285c, 1, 0x1f, 0xfff}, + { 0x3040, 1, 0x1f, 0xfff}, + { 0x9010, 7, 0x1c, 0xfff}, + { 0x9030, 1, 0x1c, 0xfff}, + { 0x9068, 16, 0x1c, 0xfff}, + { 0x9230, 2, 0x1c, 0xfff}, + { 0x9244, 1, 0x1c, 0xfff}, + { 0x9298, 1, 0x1c, 0xfff}, + { 0x92a8, 1, 0x1c, 0x1fff}, + { 0xa38c, 1, 0x1f, 0x1fff}, + { 0xa3c4, 1, 0x1e, 0xfff}, + { 0xa404, 1, 0x1f, 0xfff}, + { 0xa408, 2, 0x1f, 0x1fff}, + { 0xa42c, 12, 0x1f, 0xfff}, + { 0xa580, 1, 0x1f, 0x1fff}, + { 0xa590, 1, 0x1f, 0x1fff}, + { 0xa600, 5, 0x1e, 0xfff}, + { 0xa618, 1, 0x1e, 0xfff}, + { 0xa714, 1, 0x1c, 0xfff}, + { 0xa720, 1, 0x1c, 0xfff}, + { 0xa750, 1, 0x1c, 0xfff}, + { 0xc09c, 1, 0x3, 0xfff}, + { 0x103b0, 1, 0x1f, 0xfff}, + { 0x103c0, 1, 0x1f, 0xfff}, + { 0x103d0, 1, 0x3, 0x1fff}, + { 0x10418, 1, 0x1f, 0xfff}, + { 0x10420, 1, 0x1f, 0xfff}, + { 0x10428, 1, 0x1f, 0xfff}, + { 0x10460, 1, 0x1f, 0xfff}, + { 0x10474, 1, 0x1f, 0xfff}, + { 0x104e0, 1, 0x1f, 0xfff}, + { 0x104ec, 1, 0x1f, 0xfff}, + { 0x104f8, 1, 0x1f, 0xfff}, + { 0x10508, 1, 0x1f, 0xfff}, + { 0x10530, 1, 0x1f, 0xfff}, + { 0x10538, 1, 0x1f, 0xfff}, + { 0x10548, 1, 0x1f, 0xfff}, + { 0x10558, 1, 0x1f, 0xfff}, + { 0x182a8, 1, 0x1c, 0xfff}, + { 0x182b8, 1, 0x1c, 0xfff}, + { 0x18308, 1, 0x1c, 0xfff}, + { 0x18318, 1, 0x1c, 0xfff}, + { 0x18338, 1, 0x1c, 0xfff}, + { 0x18348, 1, 0x1c, 0xfff}, + { 0x183bc, 1, 0x1c, 0x1fff}, + { 0x183cc, 1, 0x1c, 0x1fff}, + { 0x18570, 1, 0x18, 0xfff}, + { 0x18578, 1, 0x18, 0xfff}, + { 0x1858c, 1, 0x18, 0xfff}, + { 0x18594, 1, 0x18, 0xfff}, + { 0x1862c, 4, 0x10, 0xfff}, + { 0x2021c, 11, 0x1f, 0xfff}, + { 0x202a8, 1, 0x1f, 0xfff}, + { 0x202b8, 1, 0x1f, 0x1fff}, + { 0x20404, 1, 0x1f, 0xfff}, + { 0x2040c, 2, 0x1f, 0xfff}, + { 0x2041c, 2, 0x1f, 0xfff}, + { 0x40154, 14, 0x1f, 0xfff}, + { 0x40198, 1, 0x1f, 0x1fff}, + { 0x404ac, 1, 0x1f, 0xfff}, + { 0x404bc, 1, 0x1f, 0x1fff}, + { 0x42290, 1, 0x1f, 0xfff}, + { 0x422a0, 1, 0x1f, 0xfff}, + { 0x422b0, 1, 0x1f, 0x1fff}, + { 0x42548, 1, 0x1f, 0xfff}, + { 0x42550, 1, 0x1f, 0xfff}, + { 0x42558, 1, 0x1f, 0xfff}, + { 0x50160, 8, 0x1f, 0xfff}, + { 0x501d0, 1, 0x1f, 0xfff}, + { 0x501e0, 1, 0x1f, 0x1fff}, + { 0x50204, 1, 0x1f, 0xfff}, + { 0x5020c, 2, 0x1f, 0xfff}, + { 0x5021c, 1, 0x1f, 0xfff}, + { 0x60090, 1, 0x1f, 0xfff}, + { 0x6011c, 1, 0x1f, 0xfff}, + { 0x6012c, 1, 0x1f, 0x1fff}, + { 0xc101c, 1, 0x1f, 0xfff}, + { 0xc102c, 1, 0x1f, 0x1fff}, + { 0xc2290, 1, 0x1f, 0xfff}, + { 0xc22a0, 1, 0x1f, 0xfff}, + { 0xc22b0, 1, 0x1f, 0x1fff}, + { 0xc2548, 1, 0x1f, 0xfff}, + { 0xc2550, 1, 0x1f, 0xfff}, + { 0xc2558, 1, 0x1f, 0xfff}, + { 0xc4294, 1, 0x1f, 0xfff}, + { 0xc42a4, 1, 0x1f, 0xfff}, + { 0xc42b4, 1, 0x1f, 0x1fff}, + { 0xc4550, 1, 0x1f, 0xfff}, + { 0xc4558, 1, 0x1f, 0xfff}, + { 0xc4560, 1, 0x1f, 0xfff}, + { 0xd016c, 8, 0x1f, 0xfff}, + { 0xd01d8, 1, 0x1f, 0xfff}, + { 0xd01e8, 1, 0x1f, 0x1fff}, + { 0xd0204, 1, 0x1f, 0xfff}, + { 0xd020c, 3, 0x1f, 0xfff}, + { 0xe0154, 8, 0x1f, 0xfff}, + { 0xe01c8, 1, 0x1f, 0xfff}, + { 0xe01d8, 1, 0x1f, 0x1fff}, + { 0xe0204, 1, 0x1f, 0xfff}, + { 0xe020c, 2, 0x1f, 0xfff}, + { 0xe021c, 2, 0x1f, 0xfff}, + { 0x101014, 1, 0x1f, 0xfff}, + { 0x101030, 1, 0x1f, 0xfff}, + { 0x101040, 1, 0x1f, 0x1fff}, + { 0x102058, 1, 0x1f, 0x1fff}, + { 0x102080, 16, 0x1f, 0xfff}, + { 0x103004, 2, 0x1f, 0xfff}, + { 0x103068, 1, 0x1f, 0xfff}, + { 0x103078, 1, 0x1f, 0xfff}, + { 0x103088, 1, 0x1f, 0x1fff}, + { 0x10309c, 2, 0x1e, 0xfff}, + { 0x1030b8, 2, 0x1c, 0xfff}, + { 0x1030cc, 1, 0x1c, 0xfff}, + { 0x1030e0, 1, 0x1c, 0xfff}, + { 0x104004, 1, 0x1f, 0xfff}, + { 0x104018, 1, 0x1f, 0xfff}, + { 0x104020, 1, 0x1f, 0xfff}, + { 0x10403c, 1, 0x1f, 0xfff}, + { 0x1040fc, 1, 0x1f, 0xfff}, + { 0x10410c, 1, 0x1f, 0x1fff}, + { 0x104400, 1, 0x1f, 0x1fff}, + { 0x104404, 63, 0x1f, 0xfff}, + { 0x104800, 1, 0x1f, 0x1fff}, + { 0x104804, 63, 0x1f, 0xfff}, + { 0x105000, 4, 0x1f, 0x1fff}, + { 0x105010, 252, 0x1f, 0xfff}, + { 0x108094, 1, 0x3, 0xfff}, + { 0x1201b0, 2, 0x1f, 0xfff}, + { 0x12032c, 1, 0x1f, 0xfff}, + { 0x12036c, 3, 0x1f, 0xfff}, + { 0x120408, 2, 0x1f, 0xfff}, + { 0x120414, 15, 0x1f, 0xfff}, + { 0x120478, 2, 0x1f, 0xfff}, + { 0x12052c, 1, 0x1f, 0xfff}, + { 0x120564, 3, 0x1f, 0xfff}, + { 0x12057c, 1, 0x1f, 0x1fff}, + { 0x12058c, 1, 0x1f, 0x1fff}, + { 0x120608, 1, 0x1e, 0xfff}, + { 0x120748, 1, 0x1c, 0xfff}, + { 0x120778, 2, 0x1c, 0xfff}, + { 0x120808, 3, 0x1f, 0xfff}, + { 0x120818, 1, 0x1f, 0xfff}, + { 0x120820, 1, 0x1f, 0xfff}, + { 0x120828, 1, 0x1f, 0xfff}, + { 0x120830, 1, 0x1f, 0xfff}, + { 0x120838, 1, 0x1f, 0xfff}, + { 0x120840, 1, 0x1f, 0xfff}, + { 0x120848, 1, 0x1f, 0xfff}, + { 0x120850, 1, 0x1f, 0xfff}, + { 0x120858, 1, 0x1f, 0xfff}, + { 0x120860, 1, 0x1f, 0xfff}, + { 0x120868, 1, 0x1f, 0xfff}, + { 0x120870, 1, 0x1f, 0xfff}, + { 0x120878, 1, 0x1f, 0xfff}, + { 0x120880, 1, 0x1f, 0xfff}, + { 0x120888, 1, 0x1f, 0xfff}, + { 0x120890, 1, 0x1f, 0xfff}, + { 0x120898, 1, 0x1f, 0xfff}, + { 0x1208a0, 1, 0x1f, 0xfff}, + { 0x1208a8, 1, 0x1f, 0xfff}, + { 0x1208b0, 1, 0x1f, 0xfff}, + { 0x1208b8, 1, 0x1f, 0xfff}, + { 0x1208c0, 1, 0x1f, 0xfff}, + { 0x1208c8, 1, 0x1f, 0xfff}, + { 0x1208d0, 1, 0x1f, 0xfff}, + { 0x1208d8, 1, 0x1f, 0xfff}, + { 0x1208e0, 1, 0x1f, 0xfff}, + { 0x1208e8, 1, 0x1f, 0xfff}, + { 0x1208f0, 1, 0x1f, 0xfff}, + { 0x1208f8, 1, 0x1f, 0xfff}, + { 0x120900, 1, 0x1f, 0xfff}, + { 0x120908, 1, 0x1f, 0xfff}, + { 0x130030, 1, 0x1c, 0xfff}, + { 0x13004c, 3, 0x1c, 0xfff}, + { 0x130064, 2, 0x1c, 0xfff}, + { 0x13009c, 1, 0x1c, 0x1fff}, + { 0x130130, 1, 0x1c, 0xfff}, + { 0x13016c, 1, 0x1c, 0xfff}, + { 0x130300, 1, 0x1c, 0xfff}, + { 0x130480, 1, 0x1c, 0xfff}, + { 0x14005c, 2, 0xf, 0xfff}, + { 0x1400d0, 2, 0xf, 0xfff}, + { 0x1400e0, 1, 0xf, 0xfff}, + { 0x1401c8, 1, 0xf, 0xfff}, + { 0x140200, 6, 0xf, 0xfff}, + { 0x140338, 7, 0x10, 0xfff}, + { 0x140370, 7, 0x10, 0xfff}, + { 0x15c1bc, 6, 0x10, 0xfff}, + { 0x15c230, 7, 0x10, 0xfff}, + { 0x16101c, 1, 0x1f, 0xfff}, + { 0x16102c, 1, 0x1f, 0x1fff}, + { 0x164014, 2, 0x1f, 0xfff}, + { 0x1640f0, 1, 0x1f, 0xfff}, + { 0x166290, 1, 0x1f, 0xfff}, + { 0x1662a0, 1, 0x1f, 0xfff}, + { 0x1662b0, 1, 0x1f, 0x1fff}, + { 0x166548, 1, 0x1f, 0xfff}, + { 0x166550, 1, 0x1f, 0xfff}, + { 0x166558, 1, 0x1f, 0xfff}, + { 0x168000, 1, 0x1f, 0xfff}, + { 0x168008, 1, 0x1f, 0xfff}, + { 0x168010, 1, 0x1f, 0xfff}, + { 0x168018, 1, 0x1f, 0xfff}, + { 0x168028, 2, 0x1f, 0xfff}, + { 0x168058, 9, 0x1f, 0xfff}, + { 0x168238, 1, 0x1f, 0xfff}, + { 0x1682d0, 7, 0x1f, 0xfff}, + { 0x168300, 2, 0x3, 0xfff}, + { 0x168308, 65, 0x1f, 0xfff}, + { 0x168410, 2, 0x1f, 0xfff}, + { 0x168438, 1, 0x1f, 0xfff}, + { 0x168448, 1, 0x1f, 0x1fff}, + { 0x168a00, 128, 0x1f, 0xfff}, + { 0x16e200, 128, 0x2, 0xfff}, + { 0x16e404, 2, 0x2, 0xfff}, + { 0x16e584, 64, 0x2, 0xfff}, + { 0x16e684, 2, 0x1e, 0xfff}, + { 0x16e68c, 4, 0x2, 0xfff}, + { 0x16e6fc, 4, 0x1c, 0xfff}, + { 0x16e7ac, 12, 0x10, 0xfff}, + { 0x1700a4, 1, 0x1f, 0xfff}, + { 0x1700ac, 2, 0x1f, 0xfff}, + { 0x1700c0, 1, 0x1f, 0xfff}, + { 0x170174, 1, 0x1f, 0xfff}, + { 0x170184, 1, 0x1f, 0x1fff}, + { 0x1800f4, 1, 0x1f, 0xfff}, + { 0x180104, 1, 0x1f, 0xfff}, + { 0x180114, 1, 0x1f, 0x1fff}, + { 0x180124, 1, 0x1f, 0x1fff}, + { 0x18026c, 1, 0x1f, 0xfff}, + { 0x1802a0, 1, 0x1f, 0xfff}, + { 0x1b8000, 1, 0x1f, 0xfff}, + { 0x1b8040, 1, 0x1f, 0xfff}, + { 0x1b8080, 1, 0x1f, 0xfff}, + { 0x1b80c0, 1, 0x1f, 0xfff}, + { 0x200104, 1, 0x1f, 0xfff}, + { 0x200114, 1, 0x1f, 0xfff}, + { 0x200124, 1, 0x1f, 0x1fff}, + { 0x200134, 1, 0x1f, 0x1fff}, + { 0x20026c, 1, 0x1f, 0xfff}, + { 0x2002a0, 1, 0x1f, 0xfff}, + { 0x238000, 1, 0x1f, 0xfff}, + { 0x238040, 1, 0x1f, 0xfff}, + { 0x238080, 1, 0x1f, 0xfff}, + { 0x2380c0, 1, 0x1f, 0xfff}, + { 0x280104, 1, 0x1f, 0xfff}, + { 0x280114, 1, 0x1f, 0xfff}, + { 0x280124, 1, 0x1f, 0x1fff}, + { 0x280134, 1, 0x1f, 0x1fff}, + { 0x28026c, 1, 0x1f, 0xfff}, + { 0x2802a0, 1, 0x1f, 0xfff}, + { 0x2b8000, 1, 0x1f, 0xfff}, + { 0x2b8040, 1, 0x1f, 0xfff}, + { 0x2b8080, 1, 0x1f, 0xfff}, + { 0x300104, 1, 0x1f, 0xfff}, + { 0x300114, 1, 0x1f, 0xfff}, + { 0x300124, 1, 0x1f, 0x1fff}, + { 0x300134, 1, 0x1f, 0x1fff}, + { 0x30026c, 1, 0x1f, 0xfff}, + { 0x3002a0, 1, 0x1f, 0xfff}, + { 0x338000, 1, 0x1f, 0xfff}, + { 0x338040, 1, 0x1f, 0xfff}, + { 0x338080, 1, 0x1f, 0xfff}, + { 0x3380c0, 1, 0x1f, 0xfff} +}; -static const u32 page_write_regs_e2[] = { 328476 }; -#define PAGE_WRITE_REGS_E2 ARRAY_SIZE(page_write_regs_e2) +#define IDLE_REGS_COUNT ARRAY_SIZE(idle_reg_addrs) -static const struct reg_addr page_read_regs_e2[] = { - { 0x58000, 4608, RI_E2_ONLINE } }; -#define PAGE_READ_REGS_E2 ARRAY_SIZE(page_read_regs_e2) +static const u32 read_reg_e1[] = { + 0x1b1000}; -static const u32 page_vals_e3[] = { 0, 128 }; -#define PAGE_MODE_VALUES_E3 ARRAY_SIZE(page_vals_e3) +static const struct wreg_addr wreg_addr_e1 = { + 0x1b0c00, 192, 1, read_reg_e1, 0x1f, 0x1fff}; -static const u32 page_write_regs_e3[] = { 328476 }; -#define PAGE_WRITE_REGS_E3 ARRAY_SIZE(page_write_regs_e3) +static const u32 read_reg_e1h[] = { + 0x1b1040, 0x1b1000}; -static const struct reg_addr page_read_regs_e3[] = { - { 0x58000, 4608, RI_E3E3B0_ONLINE } }; -#define PAGE_READ_REGS_E3 ARRAY_SIZE(page_read_regs_e3) +static const struct wreg_addr wreg_addr_e1h = { + 0x1b0c00, 256, 2, read_reg_e1h, 0x1f, 0x1fff}; + +static const u32 read_reg_e2[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e2 = { + 0x1b0c00, 128, 2, read_reg_e2, 0x1f, 0x1fff}; -#endif /* BNX2X_DUMP_H */ +static const u32 read_reg_e3[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e3 = { + 0x1b0c00, 128, 2, read_reg_e3, 0x1f, 0x1fff}; + +static const u32 read_reg_e3b0[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e3b0 = { + 0x1b0c00, 128, 2, read_reg_e3b0, 0x1f, 0x1fff}; + +static const unsigned int dump_num_registers[NUM_CHIPS][NUM_PRESETS] = { + {20782, 18567, 27975, 19729, 18311, 27719, 20836, 32391, 41799, 20812, + 26247, 35655, 19074}, + {32774, 19297, 33277, 31721, 19041, 33021, 32828, 33121, 47101, 32804, + 26977, 40957, 35895}, + {36527, 17928, 33697, 35474, 18700, 34466, 36581, 31752, 47521, 36557, + 25608, 41377, 43903}, + {45239, 17936, 34387, 44186, 18708, 35156, 45293, 31760, 48211, 45269, + 25616, 42067, 43903}, + {45302, 17999, 34802, 44249, 18771, 35571, 45356, 31823, 48626, 45332, + 25679, 42482, 43903} +}; +#endif diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 55f1cb0..9c9fe0e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -186,6 +186,7 @@ static const struct { }; #define BNX2X_NUM_STATS ARRAY_SIZE(bnx2x_stats_arr) + static int bnx2x_get_port_type(struct bnx2x *bp) { int port_type; @@ -596,29 +597,58 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return 0; } -#define IS_E1_ONLINE(info) (((info) & RI_E1_ONLINE) == RI_E1_ONLINE) -#define IS_E1H_ONLINE(info) (((info) & RI_E1H_ONLINE) == RI_E1H_ONLINE) -#define IS_E2_ONLINE(info) (((info) & RI_E2_ONLINE) == RI_E2_ONLINE) -#define IS_E3_ONLINE(info) (((info) & RI_E3_ONLINE) == RI_E3_ONLINE) -#define IS_E3B0_ONLINE(info) (((info) & RI_E3B0_ONLINE) == RI_E3B0_ONLINE) +#define DUMP_ALL_PRESETS 0x1FFF +#define DUMP_MAX_PRESETS 13 -static bool bnx2x_is_reg_online(struct bnx2x *bp, - const struct reg_addr *reg_info) +static int __bnx2x_get_preset_regs_len(struct bnx2x *bp, u32 preset) { if (CHIP_IS_E1(bp)) - return IS_E1_ONLINE(reg_info->info); + return dump_num_registers[0][preset-1]; else if (CHIP_IS_E1H(bp)) - return IS_E1H_ONLINE(reg_info->info); + return dump_num_registers[1][preset-1]; else if (CHIP_IS_E2(bp)) - return IS_E2_ONLINE(reg_info->info); + return dump_num_registers[2][preset-1]; else if (CHIP_IS_E3A0(bp)) - return IS_E3_ONLINE(reg_info->info); + return dump_num_registers[3][preset-1]; else if (CHIP_IS_E3B0(bp)) - return IS_E3B0_ONLINE(reg_info->info); + return dump_num_registers[4][preset-1]; else - return false; + return 0; +} + +static int __bnx2x_get_regs_len(struct bnx2x *bp) +{ + u32 preset_idx; + int regdump_len = 0; + + /* Calculate the total preset regs length */ + for (preset_idx = 1; preset_idx <= DUMP_MAX_PRESETS; preset_idx++) + regdump_len += __bnx2x_get_preset_regs_len(bp, preset_idx); + + return regdump_len; +} + +static int bnx2x_get_regs_len(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + int regdump_len = 0; + + regdump_len = __bnx2x_get_regs_len(bp); + regdump_len *= 4; + regdump_len += sizeof(struct dump_header); + + return regdump_len; } +#define IS_E1_REG(chips) ((chips & DUMP_CHIP_E1) == DUMP_CHIP_E1) +#define IS_E1H_REG(chips) ((chips & DUMP_CHIP_E1H) == DUMP_CHIP_E1H) +#define IS_E2_REG(chips) ((chips & DUMP_CHIP_E2) == DUMP_CHIP_E2) +#define IS_E3A0_REG(chips) ((chips & DUMP_CHIP_E3A0) == DUMP_CHIP_E3A0) +#define IS_E3B0_REG(chips) ((chips & DUMP_CHIP_E3B0) == DUMP_CHIP_E3B0) + +#define IS_REG_IN_PRESET(presets, idx) \ + ((presets & (1 << (idx-1))) == (1 << (idx-1))) + /******* Paged registers info selectors ********/ static const u32 *__bnx2x_get_page_addr_ar(struct bnx2x *bp) { @@ -680,38 +710,39 @@ static u32 __bnx2x_get_page_read_num(struct bnx2x *bp) return 0; } -static int __bnx2x_get_regs_len(struct bnx2x *bp) +static bool bnx2x_is_reg_in_chip(struct bnx2x *bp, + const struct reg_addr *reg_info) { - int num_pages = __bnx2x_get_page_reg_num(bp); - int page_write_num = __bnx2x_get_page_write_num(bp); - const struct reg_addr *page_read_addr = __bnx2x_get_page_read_ar(bp); - int page_read_num = __bnx2x_get_page_read_num(bp); - int regdump_len = 0; - int i, j, k; - - for (i = 0; i < REGS_COUNT; i++) - if (bnx2x_is_reg_online(bp, ®_addrs[i])) - regdump_len += reg_addrs[i].size; - - for (i = 0; i < num_pages; i++) - for (j = 0; j < page_write_num; j++) - for (k = 0; k < page_read_num; k++) - if (bnx2x_is_reg_online(bp, &page_read_addr[k])) - regdump_len += page_read_addr[k].size; - - return regdump_len; + if (CHIP_IS_E1(bp)) + return IS_E1_REG(reg_info->chips); + else if (CHIP_IS_E1H(bp)) + return IS_E1H_REG(reg_info->chips); + else if (CHIP_IS_E2(bp)) + return IS_E2_REG(reg_info->chips); + else if (CHIP_IS_E3A0(bp)) + return IS_E3A0_REG(reg_info->chips); + else if (CHIP_IS_E3B0(bp)) + return IS_E3B0_REG(reg_info->chips); + else + return false; } -static int bnx2x_get_regs_len(struct net_device *dev) -{ - struct bnx2x *bp = netdev_priv(dev); - int regdump_len = 0; - - regdump_len = __bnx2x_get_regs_len(bp); - regdump_len *= 4; - regdump_len += sizeof(struct dump_hdr); - return regdump_len; +static bool bnx2x_is_wreg_in_chip(struct bnx2x *bp, + const struct wreg_addr *wreg_info) +{ + if (CHIP_IS_E1(bp)) + return IS_E1_REG(wreg_info->chips); + else if (CHIP_IS_E1H(bp)) + return IS_E1H_REG(wreg_info->chips); + else if (CHIP_IS_E2(bp)) + return IS_E2_REG(wreg_info->chips); + else if (CHIP_IS_E3A0(bp)) + return IS_E3A0_REG(wreg_info->chips); + else if (CHIP_IS_E3B0(bp)) + return IS_E3B0_REG(wreg_info->chips); + else + return false; } /** @@ -720,14 +751,16 @@ static int bnx2x_get_regs_len(struct net_device *dev) * @bp device handle * @p output buffer * - * Reads "paged" memories: memories that may only be read by first writing to a - * specific address ("write address") and then reading from a specific address - * ("read address"). There may be more than one write address per "page" and - * more than one read address per write address. + * Reads "paged" memories: memories that may only be read by + * first writing to a specific address ("write address") and + * then reading from a specific address ("read address"). There + * may be more than one write address per "page" and more than + * one read address per write address. */ -static void bnx2x_read_pages_regs(struct bnx2x *bp, u32 *p) +static void bnx2x_read_pages_regs(struct bnx2x *bp, u32 *p, u32 preset) { u32 i, j, k, n; + /* addresses of the paged registers */ const u32 *page_addr = __bnx2x_get_page_addr_ar(bp); /* number of paged registers */ @@ -740,32 +773,100 @@ static void bnx2x_read_pages_regs(struct bnx2x *bp, u32 *p) const struct reg_addr *read_addr = __bnx2x_get_page_read_ar(bp); /* number of read addresses */ int read_num = __bnx2x_get_page_read_num(bp); + u32 addr, size; for (i = 0; i < num_pages; i++) { for (j = 0; j < write_num; j++) { REG_WR(bp, write_addr[j], page_addr[i]); - for (k = 0; k < read_num; k++) - if (bnx2x_is_reg_online(bp, &read_addr[k])) - for (n = 0; n < - read_addr[k].size; n++) - *p++ = REG_RD(bp, - read_addr[k].addr + n*4); + + for (k = 0; k < read_num; k++) { + if (IS_REG_IN_PRESET(read_addr[k].presets, + preset)) { + size = read_addr[k].size; + for (n = 0; n < size; n++) { + addr = read_addr[k].addr + n*4; + *p++ = REG_RD(bp, addr); + } + } + } } } } -static void __bnx2x_get_regs(struct bnx2x *bp, u32 *p) +static int __bnx2x_get_preset_regs(struct bnx2x *bp, u32 *p, u32 preset) { - u32 i, j; + u32 i, j, addr; + const struct wreg_addr *wreg_addr_p = NULL; + + if (CHIP_IS_E1(bp)) + wreg_addr_p = &wreg_addr_e1; + else if (CHIP_IS_E1H(bp)) + wreg_addr_p = &wreg_addr_e1h; + else if (CHIP_IS_E2(bp)) + wreg_addr_p = &wreg_addr_e2; + else if (CHIP_IS_E3A0(bp)) + wreg_addr_p = &wreg_addr_e3; + else if (CHIP_IS_E3B0(bp)) + wreg_addr_p = &wreg_addr_e3b0; + + /* Read the idle_chk registers */ + for (i = 0; i < IDLE_REGS_COUNT; i++) { + if (bnx2x_is_reg_in_chip(bp, &idle_reg_addrs[i]) && + IS_REG_IN_PRESET(idle_reg_addrs[i].presets, preset)) { + for (j = 0; j < idle_reg_addrs[i].size; j++) + *p++ = REG_RD(bp, idle_reg_addrs[i].addr + j*4); + } + } /* Read the regular registers */ - for (i = 0; i < REGS_COUNT; i++) - if (bnx2x_is_reg_online(bp, ®_addrs[i])) + for (i = 0; i < REGS_COUNT; i++) { + if (bnx2x_is_reg_in_chip(bp, ®_addrs[i]) && + IS_REG_IN_PRESET(reg_addrs[i].presets, preset)) { for (j = 0; j < reg_addrs[i].size; j++) *p++ = REG_RD(bp, reg_addrs[i].addr + j*4); + } + } + + /* Read the CAM registers */ + if (bnx2x_is_wreg_in_chip(bp, wreg_addr_p) && + IS_REG_IN_PRESET(wreg_addr_p->presets, preset)) { + for (i = 0; i < wreg_addr_p->size; i++) { + *p++ = REG_RD(bp, wreg_addr_p->addr + i*4); + + /* In case of wreg_addr register, read additional + registers from read_regs array + */ + for (j = 0; j < wreg_addr_p->read_regs_count; j++) { + addr = *(wreg_addr_p->read_regs); + *p++ = REG_RD(bp, addr + j*4); + } + } + } + + /* Paged registers are supported in E2 & E3 only */ + if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp)) { + /* Read "paged" registes */ + bnx2x_read_pages_regs(bp, p, preset); + } + + return 0; +} + +static void __bnx2x_get_regs(struct bnx2x *bp, u32 *p) +{ + u32 preset_idx; - /* Read "paged" registes */ - bnx2x_read_pages_regs(bp, p); + /* Read all registers, by reading all preset registers */ + for (preset_idx = 1; preset_idx <= DUMP_MAX_PRESETS; preset_idx++) { + /* Skip presets with IOR */ + if ((preset_idx == 2) || + (preset_idx == 5) || + (preset_idx == 8) || + (preset_idx == 11)) + continue; + __bnx2x_get_preset_regs(bp, p, preset_idx); + p += __bnx2x_get_preset_regs_len(bp, preset_idx); + } } static void bnx2x_get_regs(struct net_device *dev, @@ -773,9 +874,9 @@ static void bnx2x_get_regs(struct net_device *dev, { u32 *p = _p; struct bnx2x *bp = netdev_priv(dev); - struct dump_hdr dump_hdr = {0}; + struct dump_header dump_hdr = {0}; - regs->version = 1; + regs->version = 2; memset(p, 0, regs->len); if (!netif_running(bp->dev)) @@ -785,32 +886,161 @@ static void bnx2x_get_regs(struct net_device *dev, * cause false alarms by reading never written registers. We * will re-enable parity attentions right after the dump. */ + + /* Disable parity on path 0 */ + bnx2x_pretend_func(bp, 0); bnx2x_disable_blocks_parity(bp); - dump_hdr.hdr_size = (sizeof(struct dump_hdr) / 4) - 1; - dump_hdr.dump_sign = dump_sign_all; - dump_hdr.xstorm_waitp = REG_RD(bp, XSTORM_WAITP_ADDR); - dump_hdr.tstorm_waitp = REG_RD(bp, TSTORM_WAITP_ADDR); - dump_hdr.ustorm_waitp = REG_RD(bp, USTORM_WAITP_ADDR); - dump_hdr.cstorm_waitp = REG_RD(bp, CSTORM_WAITP_ADDR); + /* Disable parity on path 1 */ + bnx2x_pretend_func(bp, 1); + bnx2x_disable_blocks_parity(bp); - if (CHIP_IS_E1(bp)) - dump_hdr.info = RI_E1_ONLINE; - else if (CHIP_IS_E1H(bp)) - dump_hdr.info = RI_E1H_ONLINE; - else if (!CHIP_IS_E1x(bp)) - dump_hdr.info = RI_E2_ONLINE | - (BP_PATH(bp) ? RI_PATH1_DUMP : RI_PATH0_DUMP); + /* Return to current function */ + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - memcpy(p, &dump_hdr, sizeof(struct dump_hdr)); - p += dump_hdr.hdr_size + 1; + dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; + dump_hdr.preset = DUMP_ALL_PRESETS; + dump_hdr.version = BNX2X_DUMP_VERSION; + + /* dump_meta_data presents OR of CHIP and PATH. */ + if (CHIP_IS_E1(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1; + } else if (CHIP_IS_E1H(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1H; + } else if (CHIP_IS_E2(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E2 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3A0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3A0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3B0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3B0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } + + memcpy(p, &dump_hdr, sizeof(struct dump_header)); + p += dump_hdr.header_size + 1; /* Actually read the registers */ __bnx2x_get_regs(bp, p); - /* Re-enable parity attentions */ + /* Re-enable parity attentions on path 0 */ + bnx2x_pretend_func(bp, 0); + bnx2x_clear_blocks_parity(bp); + bnx2x_enable_blocks_parity(bp); + + /* Re-enable parity attentions on path 1 */ + bnx2x_pretend_func(bp, 1); bnx2x_clear_blocks_parity(bp); bnx2x_enable_blocks_parity(bp); + + /* Return to current function */ + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + +static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset) +{ + struct bnx2x *bp = netdev_priv(dev); + int regdump_len = 0; + + regdump_len = __bnx2x_get_preset_regs_len(bp, preset); + regdump_len *= 4; + regdump_len += sizeof(struct dump_header); + + return regdump_len; +} + +static int bnx2x_set_dump(struct net_device *dev, struct ethtool_dump *val) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* Use the ethtool_dump "flag" field as the dump preset index */ + bp->dump_preset_idx = val->flag; + return 0; +} + +static int bnx2x_get_dump_flag(struct net_device *dev, + struct ethtool_dump *dump) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* Calculate the requested preset idx length */ + dump->len = bnx2x_get_preset_regs_len(dev, bp->dump_preset_idx); + DP(BNX2X_MSG_ETHTOOL, "Get dump preset %d length=%d\n", + bp->dump_preset_idx, dump->len); + + dump->flag = ETHTOOL_GET_DUMP_DATA; + return 0; +} + +static int bnx2x_get_dump_data(struct net_device *dev, + struct ethtool_dump *dump, + void *buffer) +{ + u32 *p = buffer; + struct bnx2x *bp = netdev_priv(dev); + struct dump_header dump_hdr = {0}; + + memset(p, 0, dump->len); + + /* Disable parity attentions as long as following dump may + * cause false alarms by reading never written registers. We + * will re-enable parity attentions right after the dump. + */ + + /* Disable parity on path 0 */ + bnx2x_pretend_func(bp, 0); + bnx2x_disable_blocks_parity(bp); + + /* Disable parity on path 1 */ + bnx2x_pretend_func(bp, 1); + bnx2x_disable_blocks_parity(bp); + + /* Return to current function */ + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; + dump_hdr.preset = bp->dump_preset_idx; + dump_hdr.version = BNX2X_DUMP_VERSION; + + DP(BNX2X_MSG_ETHTOOL, "Get dump data of preset %d\n", dump_hdr.preset); + + /* dump_meta_data presents OR of CHIP and PATH. */ + if (CHIP_IS_E1(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1; + } else if (CHIP_IS_E1H(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1H; + } else if (CHIP_IS_E2(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E2 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3A0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3A0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3B0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3B0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } + + memcpy(p, &dump_hdr, sizeof(struct dump_header)); + p += dump_hdr.header_size + 1; + + /* Actually read the registers */ + __bnx2x_get_preset_regs(bp, p, dump_hdr.preset); + + /* Re-enable parity attentions on path 0 */ + bnx2x_pretend_func(bp, 0); + bnx2x_clear_blocks_parity(bp); + bnx2x_enable_blocks_parity(bp); + + /* Re-enable parity attentions on path 1 */ + bnx2x_pretend_func(bp, 1); + bnx2x_clear_blocks_parity(bp); + bnx2x_enable_blocks_parity(bp); + + /* Return to current function */ + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + return 0; } static void bnx2x_get_drvinfo(struct net_device *dev, @@ -1061,7 +1291,8 @@ static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, __be32 *ret_val, val = REG_RD(bp, MCP_REG_MCPR_NVM_READ); /* we read nvram data in cpu order * but ethtool sees it as an array of bytes - * converting to big-endian will do the work */ + * converting to big-endian will do the work + */ *ret_val = cpu_to_be32(val); rc = 0; break; @@ -1288,7 +1519,8 @@ static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, val |= (*data_buf << BYTE_OFFSET(offset)); /* nvram data is returned as an array of bytes - * convert it back to cpu order */ + * convert it back to cpu order + */ val = be32_to_cpu(val); rc = bnx2x_nvram_write_dword(bp, align_offset, val, @@ -1866,7 +2098,8 @@ static int bnx2x_test_registers(struct bnx2x *bp) hw = BNX2X_CHIP_MASK_E3; /* Repeat the test twice: - First by writing 0x00000000, second by writing 0xffffffff */ + * First by writing 0x00000000, second by writing 0xffffffff + */ for (idx = 0; idx < 2; idx++) { switch (idx) { @@ -2958,6 +3191,9 @@ static const struct ethtool_ops bnx2x_ethtool_ops = { .get_drvinfo = bnx2x_get_drvinfo, .get_regs_len = bnx2x_get_regs_len, .get_regs = bnx2x_get_regs, + .get_dump_flag = bnx2x_get_dump_flag, + .get_dump_data = bnx2x_get_dump_data, + .set_dump = bnx2x_set_dump, .get_wol = bnx2x_get_wol, .set_wol = bnx2x_set_wol, .get_msglevel = bnx2x_get_msglevel, -- cgit v0.10.2 From 823e1d90797552687d2dfab2299464e5b663a8a9 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 14 Jan 2013 05:11:47 +0000 Subject: bnx2x: improve stop-on-error Get better control over interrupts during panic, and allow FW to test outgoing Tx packets when stop-on-error is allowed. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 309bbb7..757fe2c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -123,20 +123,18 @@ do { \ } while (0) #ifdef BNX2X_STOP_ON_ERROR -void bnx2x_int_disable(struct bnx2x *bp); #define bnx2x_panic() \ do { \ bp->panic = 1; \ BNX2X_ERR("driver assert\n"); \ - bnx2x_int_disable(bp); \ - bnx2x_panic_dump(bp); \ + bnx2x_panic_dump(bp, true); \ } while (0) #else #define bnx2x_panic() \ do { \ bp->panic = 1; \ BNX2X_ERR("driver assert\n"); \ - bnx2x_panic_dump(bp); \ + bnx2x_panic_dump(bp, false); \ } while (0) #endif diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 6312e63..5409b30 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3535,13 +3535,17 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* when transmitting in a vf, start bd must hold the ethertype * for fw to enforce it */ +#ifndef BNX2X_STOP_ON_ERROR if (IS_VF(bp)) { +#endif tx_start_bd->vlan_or_ethertype = cpu_to_le16(ntohs(eth->h_proto)); +#ifndef BNX2X_STOP_ON_ERROR } else { /* used by FW for packet accounting */ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); } +#endif } /* turn on parsing and get a BD */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index a2583f2..8104b98 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -479,7 +479,7 @@ int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state); */ void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value); /* Error handling */ -void bnx2x_panic_dump(struct bnx2x *bp); +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int); void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 9c9fe0e..d3b0429 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2720,10 +2720,6 @@ static void bnx2x_self_test(struct net_device *dev, buf[2] = 1; etest->flags |= ETH_TEST_FL_FAILED; } - -#ifdef BNX2X_EXTRA_DEBUG - bnx2x_panic_dump(bp); -#endif } #define IS_PORT_STAT(i) \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f4d4896..b483851 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -802,7 +802,71 @@ static void bnx2x_fw_dump(struct bnx2x *bp) bnx2x_fw_dump_lvl(bp, KERN_ERR); } -void bnx2x_panic_dump(struct bnx2x *bp) +static void bnx2x_hc_int_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + + /* in E1 we must use only PCI configuration space to disable + * MSI/MSIX capablility + * It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block + */ + if (CHIP_IS_E1(bp)) { + /* Since IGU_PF_CONF_MSI_MSIX_EN still always on + * Use mask register to prevent from HC sending interrupts + * after we exit the function + */ + REG_WR(bp, HC_REG_INT_MASK + port*4, 0); + + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + DP(NETIF_MSG_IFDOWN, + "write %x to HC %d (addr 0x%x)\n", + val, port, addr); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, addr, val); + if (REG_RD(bp, addr) != val) + BNX2X_ERR("BUG! proper val not read from IGU!\n"); +} + +static void bnx2x_igu_int_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + val &= ~(IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN); + + DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) + BNX2X_ERR("BUG! proper val not read from IGU!\n"); +} + +static void bnx2x_int_disable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_disable(bp); + else + bnx2x_igu_int_disable(bp); +} + +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int) { int i; u16 j; @@ -812,6 +876,8 @@ void bnx2x_panic_dump(struct bnx2x *bp) u16 start = 0, end = 0; u8 cos; #endif + if (disable_int) + bnx2x_int_disable(bp); bp->stats_state = STATS_STATE_DISABLED; bp->eth_stats.unrecoverable_error++; @@ -1527,71 +1593,6 @@ void bnx2x_int_enable(struct bnx2x *bp) bnx2x_igu_int_enable(bp); } -static void bnx2x_hc_int_disable(struct bnx2x *bp) -{ - int port = BP_PORT(bp); - u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; - u32 val = REG_RD(bp, addr); - - /* - * in E1 we must use only PCI configuration space to disable - * MSI/MSIX capablility - * It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block - */ - if (CHIP_IS_E1(bp)) { - /* Since IGU_PF_CONF_MSI_MSIX_EN still always on - * Use mask register to prevent from HC sending interrupts - * after we exit the function - */ - REG_WR(bp, HC_REG_INT_MASK + port*4, 0); - - val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | - HC_CONFIG_0_REG_INT_LINE_EN_0 | - HC_CONFIG_0_REG_ATTN_BIT_EN_0); - } else - val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | - HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | - HC_CONFIG_0_REG_INT_LINE_EN_0 | - HC_CONFIG_0_REG_ATTN_BIT_EN_0); - - DP(NETIF_MSG_IFDOWN, - "write %x to HC %d (addr 0x%x)\n", - val, port, addr); - - /* flush all outstanding writes */ - mmiowb(); - - REG_WR(bp, addr, val); - if (REG_RD(bp, addr) != val) - BNX2X_ERR("BUG! proper val not read from IGU!\n"); -} - -static void bnx2x_igu_int_disable(struct bnx2x *bp) -{ - u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); - - val &= ~(IGU_PF_CONF_MSI_MSIX_EN | - IGU_PF_CONF_INT_LINE_EN | - IGU_PF_CONF_ATTN_BIT_EN); - - DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val); - - /* flush all outstanding writes */ - mmiowb(); - - REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); - if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) - BNX2X_ERR("BUG! proper val not read from IGU!\n"); -} - -static void bnx2x_int_disable(struct bnx2x *bp) -{ - if (bp->common.int_block == INT_BLOCK_HC) - bnx2x_hc_int_disable(bp); - else - bnx2x_igu_int_disable(bp); -} - void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) { int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; @@ -2945,6 +2946,10 @@ static unsigned long bnx2x_get_common_flags(struct bnx2x *bp, __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags); +#ifdef BNX2X_STOP_ON_ERROR + __set_bit(BNX2X_Q_FLG_TX_SEC, &flags); +#endif + return flags; } @@ -4765,7 +4770,7 @@ static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid, BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n", cid); - bnx2x_panic_dump(bp); + bnx2x_panic_dump(bp, false); } bnx2x_cnic_cfc_comp(bp, cid, err); return 0; -- cgit v0.10.2 From ebe61d80b42662a1cf8d24e0b8605aa16fa6e4d0 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 14 Jan 2013 05:11:48 +0000 Subject: bnx2x: Clean previous IGU status before ack When enabling interrupts, acknowledge the interrupt only after configuring the IGU to the correct interrupt mode (otherwise it would dirty selftests) Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 5409b30..b180a03 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1681,7 +1681,6 @@ static int bnx2x_setup_irqs(struct bnx2x *bp) if (rc) return rc; } else { - bnx2x_ack_int(bp); rc = bnx2x_req_irq(bp); if (rc) { BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index b483851..dce452d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1539,26 +1539,31 @@ static void bnx2x_igu_int_enable(struct bnx2x *bp) if (msix) { val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN); - val |= (IGU_PF_CONF_FUNC_EN | - IGU_PF_CONF_MSI_MSIX_EN | + val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN); if (single_msix) val |= IGU_PF_CONF_SINGLE_ISR_EN; } else if (msi) { val &= ~IGU_PF_CONF_INT_LINE_EN; - val |= (IGU_PF_CONF_FUNC_EN | - IGU_PF_CONF_MSI_MSIX_EN | + val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN); } else { val &= ~IGU_PF_CONF_MSI_MSIX_EN; - val |= (IGU_PF_CONF_FUNC_EN | - IGU_PF_CONF_INT_LINE_EN | + val |= (IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN); } + /* Clean previous status - need to configure igu prior to ack*/ + if ((!msix) || single_msix) { + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + bnx2x_ack_int(bp); + } + + val |= IGU_PF_CONF_FUNC_EN; + DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n", val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); -- cgit v0.10.2 From 9969085e7e1db68275ddfe594eac21563427fb55 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 14 Jan 2013 05:11:49 +0000 Subject: bnx2x: Added FW GRO bridging support Since submit 621b4d6 the bnx2x driver support FW GRO. However, when using the device with GRO enabled in bridging scenarios throughput is very low, as the bridge expects all incoming packets to be passed with CHECKSUM_PARTIAL - a demand which is satisfied by the SW GRO implementation, but was missed in the bnx2x driver implementation (which returned CHECKSUM_UNNECESSARY). Now, given that the traffic is supported by FW GRO (TCP/IP), the bnx2x driver calculates the pseudo checksum by itself, passing skbs with CHECKSUM_PARTIAL and giving a much better throughput when receiving GRO traffic. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index b180a03..f8801c0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -531,7 +532,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, tpa_info->parsing_flags, len_on_bd); /* set for GRO */ - if (fp->mode == TPA_MODE_GRO) + if (fp->mode == TPA_MODE_GRO && skb_shinfo(skb)->gso_size) skb_shinfo(skb)->gso_type = (GET_FLAG(tpa_info->parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == @@ -620,6 +621,55 @@ static void *bnx2x_frag_alloc(const struct bnx2x_fastpath *fp) } +#ifdef CONFIG_INET +static void bnx2x_gro_ip_csum(struct bnx2x *bp, struct sk_buff *skb) +{ + const struct iphdr *iph = ip_hdr(skb); + struct tcphdr *th; + + skb_set_transport_header(skb, sizeof(struct iphdr)); + th = tcp_hdr(skb); + + th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb), + iph->saddr, iph->daddr, 0); +} + +static void bnx2x_gro_ipv6_csum(struct bnx2x *bp, struct sk_buff *skb) +{ + struct ipv6hdr *iph = ipv6_hdr(skb); + struct tcphdr *th; + + skb_set_transport_header(skb, sizeof(struct ipv6hdr)); + th = tcp_hdr(skb); + + th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb), + &iph->saddr, &iph->daddr, 0); +} +#endif + +static void bnx2x_gro_receive(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct sk_buff *skb) +{ +#ifdef CONFIG_INET + if (fp->mode == TPA_MODE_GRO && skb_shinfo(skb)->gso_size) { + skb_set_network_header(skb, 0); + switch (be16_to_cpu(skb->protocol)) { + case ETH_P_IP: + bnx2x_gro_ip_csum(bp, skb); + break; + case ETH_P_IPV6: + bnx2x_gro_ipv6_csum(bp, skb); + break; + default: + BNX2X_ERR("FW GRO supports only IPv4/IPv6, not 0x%04x\n", + be16_to_cpu(skb->protocol)); + } + tcp_gro_complete(skb); + } +#endif + napi_gro_receive(&fp->napi, skb); +} + static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, struct bnx2x_agg_info *tpa_info, u16 pages, @@ -673,7 +723,7 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, skb, cqe, cqe_idx)) { if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN) __vlan_hwaccel_put_tag(skb, tpa_info->vlan_tag); - napi_gro_receive(&fp->napi, skb); + bnx2x_gro_receive(bp, fp, skb); } else { DP(NETIF_MSG_RX_STATUS, "Failed to allocate new pages - dropping packet!\n"); -- cgit v0.10.2 From 247fa82be1301e4f89eaa5dc10be62a9cc84e8c5 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 14 Jan 2013 05:11:50 +0000 Subject: bnx2x: Introduce 2013 and advance version to 1.78.02 Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 757fe2c..3e08a24 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,8 +26,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.78.01-0" -#define DRV_MODULE_RELDATE "2012/10/30" +#define DRV_MODULE_VERSION "1.78.02-0" +#define DRV_MODULE_RELDATE "2013/01/14" #define BNX2X_BC_VER 0x040200 #if defined(CONFIG_DCB) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index f8801c0..18fc26e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1,6 +1,6 @@ /* bnx2x_cmn.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 8104b98..faad34f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1,6 +1,6 @@ /* bnx2x_cmn.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 10bc093..37a2e9a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -1,6 +1,6 @@ /* bnx2x_dcb.c: Broadcom Everest network driver. * - * Copyright 2009-2012 Broadcom Corporation + * Copyright 2009-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h index 06c7a04..d153f44 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h @@ -1,6 +1,6 @@ /* bnx2x_dcb.h: Broadcom Everest network driver. * - * Copyright 2009-2012 Broadcom Corporation + * Copyright 2009-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index d3b0429..6292aa1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1,6 +1,6 @@ /* bnx2x_ethtool.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h index 60a83ad..2959f2a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -1,6 +1,6 @@ /* bnx2x_fw_defs.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h index 4bed52b..f572ae1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h @@ -1,6 +1,6 @@ /* bnx2x_fw_file_hdr.h: FW binary file header structure. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index d2e79be..76e30c9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -1,6 +1,6 @@ /* bnx2x_hsi.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h index c8f10f0..76df015 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -1,7 +1,7 @@ /* bnx2x_init.h: Broadcom Everest network driver. * Structures and macroes needed during the initialization. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h index d755acf..ae9b6ff 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h @@ -2,7 +2,7 @@ * Static functions needed during the initialization. * This file is "included" in bnx2x_main.c. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index cb41f54..859df75 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -1,4 +1,4 @@ -/* Copyright 2008-2012 Broadcom Corporation +/* Copyright 2008-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index ee6e7ec..d25c7d7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -1,4 +1,4 @@ -/* Copyright 2008-2012 Broadcom Corporation +/* Copyright 2008-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index dce452d..af7af08 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1,6 +1,6 @@ /* bnx2x_main.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h index ddd5106..caf1aef 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h @@ -1,6 +1,6 @@ /* bnx2x_mfw_req.h: Broadcom Everest network driver. * - * Copyright (c) 2012 Broadcom Corporation + * Copyright (c) 2012-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index dec014e..791eb2d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 147933a..8e8c91a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -1,6 +1,6 @@ /* bnx2x_sp.c: Broadcom Everest network driver. * - * Copyright (c) 2011-2012 Broadcom Corporation + * Copyright (c) 2011-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index b304678..0beac4b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -1,6 +1,6 @@ /* bnx2x_sp.h: Broadcom Everest network driver. * - * Copyright (c) 2011-2012 Broadcom Corporation + * Copyright (c) 2011-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 08db503..5e45cb9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1,6 +1,6 @@ /* bnx2x_sriov.c: Broadcom Everest network driver. * - * Copyright 2009-2012 Broadcom Corporation + * Copyright 2009-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index df4ae74..d51189b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -1,6 +1,6 @@ /* bnx2x_sriov.h: Broadcom Everest network driver. * - * Copyright 2009-2012 Broadcom Corporation + * Copyright 2009-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 93a8e74..18c2e61 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -1,6 +1,6 @@ /* bnx2x_stats.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h index b4d7b26..63a2f85 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h @@ -1,6 +1,6 @@ /* bnx2x_stats.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 850aad3..9cef520 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1,6 +1,6 @@ /* bnx2x_vfpf.c: Broadcom Everest network driver. * - * Copyright 2009-2012 Broadcom Corporation + * Copyright 2009-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index 21d2985..a74477c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -1,6 +1,6 @@ /* bnx2x_vfpf.h: Broadcom Everest network driver. * - * Copyright (c) 2011-2012 Broadcom Corporation + * Copyright (c) 2011-2013 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you -- cgit v0.10.2 From 1241f29fa3c6fa95f20e3e77452f8d6d60deae7a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:25:42 +0000 Subject: e1000e: SerDes autoneg flow control Enables flow control to be set in SerDes autoneg mode. This is what is done for copper, but relies on a different set of register/bit checks since this is all done within the Mac registers. Remove inapplicable comment in defines.h Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 02a12b6..2073532 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -241,9 +241,9 @@ #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -/* Bit definitions for the Management Data IO (MDIO) and Management Data - * Clock (MDC) pins in the Device Control Register. - */ +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 + +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 /* Device Status */ #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index cf21777..06239fe 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -191,6 +191,10 @@ enum e1e_registers { E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */ E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ + E1000_PCS_LCTL = 0x04208, /* PCS Link Control - RW */ + E1000_PCS_LSTAT = 0x0420C, /* PCS Link Status - RO */ + E1000_PCS_ANADV = 0x04218, /* AN advertisement - RW */ + E1000_PCS_LPAB = 0x0421C, /* Link Partner Ability - RW */ E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */ E1000_RFCTL = 0x05008, /* Receive Filter Control */ E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 54d9daf..0fa4c06 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1021,6 +1021,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; s32 ret_val = 0; + u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; u16 speed, duplex; @@ -1185,6 +1186,130 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } } + /* Check for the case where we have SerDes media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) && + mac->autoneg) { + /* Read the PCS_LSTS and check to see if AutoNeg + * has completed. + */ + pcs_status_reg = er32(PCS_LSTAT); + + if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { + e_dbg("PCS Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (PCS_ANADV) and the Auto_Negotiation Base + * Page Ability Register (PCS_LPAB) to determine how + * flow control was negotiated. + */ + pcs_adv_reg = er32(PCS_ANADV); + pcs_lp_ability_reg = er32(PCS_LPAB); + + /* Two bits in the Auto Negotiation Advertisement Register + * (PCS_ANADV) and two bits in the Auto Negotiation Base + * Page Ability Register (PCS_LPAB) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | e1000_fc_full + * + */ + if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + e_dbg("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + e_dbg("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + e_dbg("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + e_dbg("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + e_dbg("Flow Control = NONE.\n"); + } + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + pcs_ctrl_reg = er32(PCS_LCTL); + pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; + ew32(PCS_LCTL, pcs_ctrl_reg); + + ret_val = e1000e_force_mac_fc(hw); + if (ret_val) { + e_dbg("Error forcing flow control settings\n"); + return ret_val; + } + } + return 0; } -- cgit v0.10.2 From 635ab56439e21cbea6be346ac71222f9c4ac6463 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:25:47 +0000 Subject: e1000e: Acquire/release semaphore when writing each EEPROM page When data blocks are written to the EEPROM, the HW/SW/FW semaphore must be held for the duration. With large data blocks on 80003es2lan, 82571 and 82572, this can take too long and cause the firmware to take ownership of the semaphore and consequently ownership of writes to the EEPROM. Instead, acquire and release the semaphore for each page of the block written. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index b646880..71938ed 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -359,7 +359,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; - s32 ret_val; + s32 ret_val = -E1000_ERR_NVM; u16 widx = 0; /* A check for invalid values: offset too large, too many words, @@ -371,16 +371,18 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) return -E1000_ERR_NVM; } - ret_val = nvm->ops.acquire(hw); - if (ret_val) - return ret_val; - while (widx < words) { u8 write_opcode = NVM_WRITE_OPCODE_SPI; - ret_val = e1000_ready_nvm_eeprom(hw); + ret_val = nvm->ops.acquire(hw); if (ret_val) - goto release; + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) { + nvm->ops.release(hw); + return ret_val; + } e1000_standby_nvm(hw); @@ -413,12 +415,10 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) break; } } + usleep_range(10000, 20000); + nvm->ops.release(hw); } - usleep_range(10000, 20000); -release: - nvm->ops.release(hw); - return ret_val; } -- cgit v0.10.2 From 1cc7a3a14fa60f31ca4ff69f0dd31f369e0a51c2 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 9 Jan 2013 08:15:42 +0000 Subject: e1000e: Invalid Image CSUM bit changed for I217 On I217, the bit that indicates an invalid EEPROM (NVM) image checksum has changed from previous ICH/PCH LOMs. When validating the EEPROM checksum, check the appropriate bit on different devices. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 2073532..7326ea2 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -639,6 +639,10 @@ /* NVM Word Offsets */ #define NVM_COMPAT 0x0003 #define NVM_ID_LED_SETTINGS 0x0004 +#define NVM_FUTURE_INIT_WORD1 0x0019 +#define NVM_COMPAT_VALID_CSUM 0x0001 +#define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 + #define NVM_INIT_CONTROL2_REG 0x000F #define NVM_INIT_CONTROL3_PORT_B 0x0014 #define NVM_INIT_3GIO_3 0x001A diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9763365..7d5f6b7 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -2949,19 +2949,32 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) { s32 ret_val; u16 data; + u16 word; + u16 valid_csum_mask; - /* Read 0x19 and check bit 6. If this bit is 0, the checksum - * needs to be fixed. This bit is an indication that the NVM - * was prepared by OEM software and did not calculate the - * checksum...a likely scenario. + /* Read NVM and check Invalid Image CSUM bit. If this bit is 0, + * the checksum needs to be fixed. This bit is an indication that + * the NVM was prepared by OEM software and did not calculate + * the checksum...a likely scenario. */ - ret_val = e1000_read_nvm(hw, 0x19, 1, &data); + switch (hw->mac.type) { + case e1000_pch_lpt: + word = NVM_COMPAT; + valid_csum_mask = NVM_COMPAT_VALID_CSUM; + break; + default: + word = NVM_FUTURE_INIT_WORD1; + valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM; + break; + } + + ret_val = e1000_read_nvm(hw, word, 1, &data); if (ret_val) return ret_val; - if (!(data & 0x40)) { - data |= 0x40; - ret_val = e1000_write_nvm(hw, 0x19, 1, &data); + if (!(data & valid_csum_mask)) { + data |= valid_csum_mask; + ret_val = e1000_write_nvm(hw, word, 1, &data); if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); -- cgit v0.10.2 From 757b8b1d2bfa1210592bfd2984852b155eb58746 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Jan 2013 21:14:21 -0800 Subject: net_sched: fix qdisc_pkt_len_init() commit 1def9238d4aa2 (net_sched: more precise pkt_len computation) does a wrong computation of mac + network headers length, as it includes the padding before the frame. Signed-off-by: Eric Dumazet Cc: Yuval Mintz Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 862eaa7..b6d2b32 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2776,8 +2776,12 @@ static void qdisc_pkt_len_init(struct sk_buff *skb) * we add to pkt_len the headers size of all segments */ if (shinfo->gso_size) { - unsigned int hdr_len = skb_transport_offset(skb); + unsigned int hdr_len; + /* mac layer + network layer */ + hdr_len = skb_transport_header(skb) - skb_mac_header(skb); + + /* + transport layer */ if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) hdr_len += tcp_hdrlen(skb); else -- cgit v0.10.2 From 4ddc48a9a5f3352343eb4725eb75f9ca38fa1559 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:25:58 +0000 Subject: e1000e: helper functions for accessing EMI registers The Extended Management Interface (EMI) registers are accessed by first writing the EMI register offset to the EMI_ADDR regiter and then either reading or writing the data to/from the EMI_DATA register. Add helper functions for performing these steps and convert existing EMI register accesses accordingly. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 7d5f6b7..8004d71 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -153,7 +153,7 @@ #define I82579_LPI_CTRL_ENABLE_MASK 0x6000 #define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 -/* EMI Registers */ +/* Extended Management Interface (EMI) Registers */ #define I82579_EMI_ADDR 0x10 #define I82579_EMI_DATA 0x11 #define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ @@ -789,6 +789,58 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) } /** + * __e1000_access_emi_reg_locked - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + * + * This helper function assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val = 0; + + ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data); + else + ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg_locked - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) +{ + return __e1000_access_emi_reg_locked(hw, addr, data, true); +} + +/** + * e1000_write_emi_reg_locked - Write Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be written to the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) +{ + return __e1000_access_emi_reg_locked(hw, addr, &data, false); +} + +/** * e1000_set_eee_pchlan - Enable/disable EEE support * @hw: pointer to the HW structure * @@ -823,11 +875,11 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_LP_ABILITY); + ret_val = e1000_read_emi_reg_locked(hw, + I217_EEE_LP_ABILITY, + &dev_spec->eee_lp_ability); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability); /* EEE is not supported in 100Half, so ignore partner's EEE * in 100 ability if full-duplex is not advertised. @@ -1987,18 +2039,12 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_THRESHOLD); - if (ret_val) - goto release; /* set MSE higher to enable link to stay up when noise is high */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0034); - if (ret_val) - goto release; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_LINK_DOWN); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034); if (ret_val) goto release; /* drop link after 5 times MSE threshold was reached */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0005); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005); release: hw->phy.ops.release(hw); @@ -2172,10 +2218,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I82579_LPI_UPDATE_TIMER); - if (!ret_val) - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x1387); + ret_val = e1000_write_emi_reg_locked(hw, + I82579_LPI_UPDATE_TIMER, + 0x1387); hw->phy.ops.release(hw); } @@ -4013,11 +4058,12 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if (!dev_spec->eee_disable) { u16 eee_advert; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_ADVERTISEMENT); + ret_val = + e1000_read_emi_reg_locked(hw, + I217_EEE_ADVERTISEMENT, + &eee_advert); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert); /* Disable LPLU if both link partners support 100BaseT * EEE and 100Full is advertised on both ends of the -- cgit v0.10.2 From 651fb1026d9c41d6073cffddfaef1aa224d4ea85 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:03 +0000 Subject: e1000e: 82577: workaround for link drop issue When connected to certain switches, the 82577 PHY might drop link unexpectedly. Work around the issue by setting the Mean Square Error higher than the hardware default. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 8004d71..a7d6c87 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -157,7 +157,8 @@ #define I82579_EMI_ADDR 0x10 #define I82579_EMI_DATA 0x11 #define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */ +#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ +#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ #define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ #define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ #define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ @@ -1809,6 +1810,11 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF); + if (ret_val) + goto release; + + /* set MSE higher to enable link to stay up when noise is high */ + ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034); release: hw->phy.ops.release(hw); -- cgit v0.10.2 From 3d4d5755f1f1ff27f7f050f07758ae2e7a1256da Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:08 +0000 Subject: e1000e: fix enabling of EEE on 82579 and I217 Energy Efficient Ethernet on 82579 and I217 should only be enabled if not disabled by the user, if the link is full duplex and the link partner has similar EEE capabilities (stored in different EMI registers on the two different parts). After enabling EEE, read the IEEE MMD register 3.1 (which is also stored in different EMI registers on the two different parts) to clear the count of received Tx/Rx LPI indications. Also, rename I217_EEE_100_SUPPORTED to I82579_EEE_100_SUPPORTED to indicate the bit is valid starting with I82579 (released before I217). Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index a7d6c87..15d9314 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -150,6 +150,8 @@ /* PHY Low Power Idle Control */ #define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_100_ENABLE 0x2000 +#define I82579_LPI_CTRL_1000_ENABLE 0x4000 #define I82579_LPI_CTRL_ENABLE_MASK 0x6000 #define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 @@ -160,9 +162,13 @@ #define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ #define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ #define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ +#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ +#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ +#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ #define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ #define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ -#define I217_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ /* Intel Rapid Start Technology Support */ #define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) @@ -845,54 +851,84 @@ static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) * e1000_set_eee_pchlan - Enable/disable EEE support * @hw: pointer to the HW structure * - * Enable/disable EEE based on setting in dev_spec structure. The bits in - * the LPI Control register will remain set only if/when link is up. + * Enable/disable EEE based on setting in dev_spec structure, the duplex of + * the link and the EEE capabilities of the link partner. The LPI Control + * register bits will remain set only if/when link is up. **/ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - s32 ret_val = 0; - u16 phy_reg; + s32 ret_val; + u16 lpi_ctrl; if ((hw->phy.type != e1000_phy_82579) && (hw->phy.type != e1000_phy_i217)) return 0; - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - if (dev_spec->eee_disable) - phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK; - else - phy_reg |= I82579_LPI_CTRL_ENABLE_MASK; - - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); + ret_val = e1e_rphy_locked(hw, I82579_LPI_CTRL, &lpi_ctrl); if (ret_val) - return ret_val; + goto release; + + /* Clear bits that enable EEE in various speeds */ + lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK; + + /* Enable EEE if not disabled by user */ + if (!dev_spec->eee_disable) { + u16 lpa, pcs_status, data; - if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) { /* Save off link partner's EEE ability */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - ret_val = e1000_read_emi_reg_locked(hw, - I217_EEE_LP_ABILITY, + switch (hw->phy.type) { + case e1000_phy_82579: + lpa = I82579_EEE_LP_ABILITY; + pcs_status = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + lpa = I217_EEE_LP_ABILITY; + pcs_status = I217_EEE_PCS_STATUS; + break; + default: + ret_val = -E1000_ERR_PHY; + goto release; + } + ret_val = e1000_read_emi_reg_locked(hw, lpa, &dev_spec->eee_lp_ability); if (ret_val) goto release; - /* EEE is not supported in 100Half, so ignore partner's EEE - * in 100 ability if full-duplex is not advertised. + /* Enable EEE only for speeds in which the link partner is + * EEE capable. */ - e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg); - if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS)) - dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED; -release: - hw->phy.ops.release(hw); + if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) + lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; + + if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { + e1e_rphy_locked(hw, PHY_LP_ABILITY, &data); + if (data & NWAY_LPAR_100TX_FD_CAPS) + lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; + else + /* EEE is not supported in 100Half, so ignore + * partner's EEE in 100 ability if full-duplex + * is not advertised. + */ + dev_spec->eee_lp_ability &= + ~I82579_EEE_100_SUPPORTED; + } + + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); + if (ret_val) + goto release; } - return 0; + ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl); +release: + hw->phy.ops.release(hw); + + return ret_val; } /** @@ -4075,9 +4111,9 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) * EEE and 100Full is advertised on both ends of the * link. */ - if ((eee_advert & I217_EEE_100_SUPPORTED) && + if ((eee_advert & I82579_EEE_100_SUPPORTED) && (dev_spec->eee_lp_ability & - I217_EEE_100_SUPPORTED) && + I82579_EEE_100_SUPPORTED) && (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_NOND0A_LPLU); -- cgit v0.10.2 From 12d43f7d3cd36494a442dea6f2d2c7ccb76d0d80 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:14 +0000 Subject: e1000e: unexpected "Reset adapter" message when cable pulled When there is heavy traffic and the cable is pulled, the driver must reset the adapter to flush the Tx queue in hardware. This causes the reset path to be scheduled and logs the message "Reset adapter" which could be mis- interpreted as an error by the user. Change how the reset path is invoked for this scenario by using the same method done in an existing work-around for 80003es2lan (i.e. set a flag and if the flag is set in the reset code do not log the "Reset adapter" message since the reset is expected). Re-name the FLAG_RX_RESTART_NOW to FLAG_RESTART_NOW since it is used for resets in both the Rx and Tx specific code. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 6782a2e..3f8bbc3 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -447,7 +447,7 @@ struct e1000_info { #define FLAG_MSI_ENABLED (1 << 27) /* reserved (1 << 28) */ #define FLAG_TSO_FORCE (1 << 29) -#define FLAG_RX_RESTART_NOW (1 << 30) +#define FLAG_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) #define FLAG2_CRC_STRIPPING (1 << 0) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 337644d..7ad8ef6 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1671,7 +1671,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) /* disable receives */ u32 rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); - adapter->flags |= FLAG_RX_RESTART_NOW; + adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -1734,7 +1734,7 @@ static irqreturn_t e1000_intr(int irq, void *data) /* disable receives */ rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); - adapter->flags |= FLAG_RX_RESTART_NOW; + adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -3013,7 +3013,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) ew32(RCTL, rctl); /* just started the receive unit, no need to restart */ - adapter->flags &= ~FLAG_RX_RESTART_NOW; + adapter->flags &= ~FLAG_RESTART_NOW; } /** @@ -4355,11 +4355,11 @@ static void e1000e_enable_receives(struct e1000_adapter *adapter) { /* make sure the receive unit is started */ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && - (adapter->flags & FLAG_RX_RESTART_NOW)) { + (adapter->flags & FLAG_RESTART_NOW)) { struct e1000_hw *hw = &adapter->hw; u32 rctl = er32(RCTL); ew32(RCTL, rctl | E1000_RCTL_EN); - adapter->flags &= ~FLAG_RX_RESTART_NOW; + adapter->flags &= ~FLAG_RESTART_NOW; } } @@ -4528,8 +4528,16 @@ static void e1000_watchdog_task(struct work_struct *work) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - if (adapter->flags & FLAG_RX_NEEDS_RESTART) - schedule_work(&adapter->reset_task); + /* The link is lost so the controller stops DMA. + * If there is queued Tx work that cannot be done + * or if on an 8000ES2LAN which requires a Rx packet + * buffer work-around on link down event, reset the + * controller to flush the Tx/Rx packet buffers. + * (Do the reset outside of interrupt context). + */ + if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, LINK_TIMEOUT); @@ -4551,20 +4559,14 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); - e1000e_update_adaptive(&adapter->hw); - - if (!netif_carrier_ok(netdev) && - (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). - */ + if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return; } + e1000e_update_adaptive(&adapter->hw); + /* Simple mode for Interrupt Throttle Rate (ITR) */ if (adapter->itr_setting == 4) { /* Symmetric Tx/Rx gets a reduced ITR=2000; @@ -5134,10 +5136,9 @@ static void e1000_reset_task(struct work_struct *work) if (test_bit(__E1000_DOWN, &adapter->state)) return; - if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) && - (adapter->flags & FLAG_RX_RESTART_NOW))) { + if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); - e_err("Reset adapter\n"); + e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); } -- cgit v0.10.2 From 8e5ab42d7fdd73b11a6b6b58b4a7b26931c73385 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:19 +0000 Subject: e1000e: add missing bailout on error ...discovered during code inspection. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 15d9314..051dfda 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -2077,6 +2077,8 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) /* Set MDIO slow mode before any other MDIO access */ ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + return ret_val; ret_val = hw->phy.ops.acquire(hw); if (ret_val) -- cgit v0.10.2 From 7dbc1672f155958e2f548a29caea709a136ed0f2 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 03:11:25 +0000 Subject: e1000e: resolve checkpatch PREFER_PR_LEVEL warning WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... v2 - remove unnecessary "e1000e:" prefix as pointed out by Joe Perches since that produces a redundant "e1000e:" in the log message Cc: Joe Perches Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 7ad8ef6..b22eb04 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4300,9 +4300,8 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) u32 ctrl = er32(CTRL); /* Link status message must follow this format for user tools */ - printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", - adapter->netdev->name, - adapter->link_speed, + pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", + adapter->netdev->name, adapter->link_speed, adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half", (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" : (ctrl & E1000_CTRL_RFCE) ? "Rx" : @@ -4521,8 +4520,7 @@ static void e1000_watchdog_task(struct work_struct *work) adapter->link_speed = 0; adapter->link_duplex = 0; /* Link status message must follow this format */ - printk(KERN_INFO "e1000e: %s NIC Link is Down\n", - adapter->netdev->name); + pr_info("%s NIC Link is Down\n", adapter->netdev->name); netif_carrier_off(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, -- cgit v0.10.2 From 0a939912cf9cbc088e01a7c9493ef5791a881075 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:30 +0000 Subject: e1000e: cleanup redundant statistics counter rx_long_byte_count can be removed since it is duplicated in rx_bytes Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index f95bc6e..2225603 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -98,7 +98,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("rx_flow_control_xoff", stats.xoffrxc), E1000_STAT("tx_flow_control_xon", stats.xontxc), E1000_STAT("tx_flow_control_xoff", stats.xofftxc), - E1000_STAT("rx_long_byte_count", stats.gorc), E1000_STAT("rx_csum_offload_good", hw_csum_good), E1000_STAT("rx_csum_offload_errors", hw_csum_err), E1000_STAT("rx_header_split", rx_hdr_split), -- cgit v0.10.2 From 2a2293b9510f05f963422121109b8ec3b9ee9f9f Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:35 +0000 Subject: e1000e: cleanup unusual comment placement Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index b22eb04..18790a6 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -765,7 +765,7 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring, struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; - unsigned int bufsz = 256 - 16 /* for skb_reserve */; + unsigned int bufsz = 256 - 16; /* for skb_reserve */ i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; -- cgit v0.10.2 From 1860ac84613877f9ec8a1235e04190e26dd06514 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:40 +0000 Subject: e1000e: cleanup unnecessary line wrap Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index 89d536d..b29a8a5 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -447,8 +447,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_SmartPowerDownEnable > bd) { unsigned int spd = SmartPowerDownEnable[bd]; e1000_validate_option(&spd, &opt, adapter); - if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) - && spd) + if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd) adapter->flags |= FLAG_SMART_POWER_DOWN; } } -- cgit v0.10.2 From 3a3104e7d022ec24862448d167a21de46accf6e8 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:46 +0000 Subject: e1000e: cleanup magic number Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index 71938ed..1e7882c 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -464,8 +464,8 @@ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, if (nvm_data != NVM_PBA_PTR_GUARD) { e_dbg("NVM PBA number is not stored as string\n"); - /* we will need 11 characters to store the PBA */ - if (pba_num_size < 11) { + /* make sure callers buffer is big enough to store the PBA */ + if (pba_num_size < E1000_PBANUM_LENGTH) { e_dbg("PBA string buffer too small\n"); return E1000_ERR_NO_SPACE; } -- cgit v0.10.2 From e3d14b08e80744958af920ab8bc8ee3866c3902b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:51 +0000 Subject: e1000e: cleanup code duplication The removed code block is duplicated in e1000e_write_itr() so use that instead. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 18790a6..6aa9c5d 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2405,7 +2405,6 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, static void e1000_set_itr(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; u16 current_itr; u32 new_itr = adapter->itr; @@ -2468,10 +2467,7 @@ set_itr_now: if (adapter->msix_entries) adapter->rx_ring->set_itr = 1; else - if (new_itr) - ew32(ITR, 1000000000 / (new_itr * 256)); - else - ew32(ITR, 0); + e1000e_write_itr(adapter, new_itr); } } -- cgit v0.10.2 From d60923c465809cec44fb08c53da6cf0c53040dc1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:26:56 +0000 Subject: e1000e: merge multiple conditional statements into one Cleanup a set of conditional tests. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6aa9c5d..05538e6 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4914,12 +4914,11 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct e1000_hw *hw = &adapter->hw; u16 length, offset; - if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && - (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) - return 0; - } + if (vlan_tx_tag_present(skb) && + !((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) + return 0; if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) return 0; -- cgit v0.10.2 From 44abdc3047aecafc141dfbaf1ed4bcb77f5d1652 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 16 Jan 2013 16:05:05 +0800 Subject: xfrm: replace rwlock on xfrm_state_afinfo with rcu Similar to commit 418a99ac6ad487dc9c42e6b0e85f941af56330f2 (Replace rwlock on xfrm_policy_afinfo with rcu), the rwlock on xfrm_state_afinfo can be replaced by RCU too. Cc: Steffen Klassert Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 05db236..64780a6 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -158,8 +158,8 @@ out_unlock: mutex_unlock(&hash_resize_mutex); } -static DEFINE_RWLOCK(xfrm_state_afinfo_lock); -static struct xfrm_state_afinfo *xfrm_state_afinfo[NPROTO]; +static DEFINE_SPINLOCK(xfrm_state_afinfo_lock); +static struct xfrm_state_afinfo __rcu *xfrm_state_afinfo[NPROTO]; static DEFINE_SPINLOCK(xfrm_state_gc_lock); @@ -173,17 +173,16 @@ static struct xfrm_state_afinfo *xfrm_state_lock_afinfo(unsigned int family) struct xfrm_state_afinfo *afinfo; if (unlikely(family >= NPROTO)) return NULL; - write_lock_bh(&xfrm_state_afinfo_lock); + spin_lock_bh(&xfrm_state_afinfo_lock); afinfo = xfrm_state_afinfo[family]; if (unlikely(!afinfo)) - write_unlock_bh(&xfrm_state_afinfo_lock); + spin_unlock_bh(&xfrm_state_afinfo_lock); return afinfo; } static void xfrm_state_unlock_afinfo(struct xfrm_state_afinfo *afinfo) - __releases(xfrm_state_afinfo_lock) { - write_unlock_bh(&xfrm_state_afinfo_lock); + spin_unlock_bh(&xfrm_state_afinfo_lock); } int xfrm_register_type(const struct xfrm_type *type, unsigned short family) @@ -1845,12 +1844,12 @@ int xfrm_state_register_afinfo(struct xfrm_state_afinfo *afinfo) return -EINVAL; if (unlikely(afinfo->family >= NPROTO)) return -EAFNOSUPPORT; - write_lock_bh(&xfrm_state_afinfo_lock); + spin_lock_bh(&xfrm_state_afinfo_lock); if (unlikely(xfrm_state_afinfo[afinfo->family] != NULL)) err = -ENOBUFS; else - xfrm_state_afinfo[afinfo->family] = afinfo; - write_unlock_bh(&xfrm_state_afinfo_lock); + rcu_assign_pointer(xfrm_state_afinfo[afinfo->family], afinfo); + spin_unlock_bh(&xfrm_state_afinfo_lock); return err; } EXPORT_SYMBOL(xfrm_state_register_afinfo); @@ -1862,14 +1861,15 @@ int xfrm_state_unregister_afinfo(struct xfrm_state_afinfo *afinfo) return -EINVAL; if (unlikely(afinfo->family >= NPROTO)) return -EAFNOSUPPORT; - write_lock_bh(&xfrm_state_afinfo_lock); + spin_lock_bh(&xfrm_state_afinfo_lock); if (likely(xfrm_state_afinfo[afinfo->family] != NULL)) { if (unlikely(xfrm_state_afinfo[afinfo->family] != afinfo)) err = -EINVAL; else - xfrm_state_afinfo[afinfo->family] = NULL; + RCU_INIT_POINTER(xfrm_state_afinfo[afinfo->family], NULL); } - write_unlock_bh(&xfrm_state_afinfo_lock); + spin_unlock_bh(&xfrm_state_afinfo_lock); + synchronize_rcu(); return err; } EXPORT_SYMBOL(xfrm_state_unregister_afinfo); @@ -1879,17 +1879,16 @@ static struct xfrm_state_afinfo *xfrm_state_get_afinfo(unsigned int family) struct xfrm_state_afinfo *afinfo; if (unlikely(family >= NPROTO)) return NULL; - read_lock(&xfrm_state_afinfo_lock); - afinfo = xfrm_state_afinfo[family]; + rcu_read_lock(); + afinfo = rcu_dereference(xfrm_state_afinfo[family]); if (unlikely(!afinfo)) - read_unlock(&xfrm_state_afinfo_lock); + rcu_read_unlock(); return afinfo; } static void xfrm_state_put_afinfo(struct xfrm_state_afinfo *afinfo) - __releases(xfrm_state_afinfo_lock) { - read_unlock(&xfrm_state_afinfo_lock); + rcu_read_unlock(); } /* Temporarily located here until net/xfrm/xfrm_tunnel.c is created */ -- cgit v0.10.2 From 85168c0036fadf3657470b93cd9babeee8d123d7 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 16 Jan 2013 16:05:06 +0800 Subject: xfrm: replace rwlock on xfrm_km_list with rcu Cc: Steffen Klassert Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 64780a6..1522f19 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1644,27 +1644,26 @@ static void xfrm_replay_timer_handler(unsigned long data) } static LIST_HEAD(xfrm_km_list); -static DEFINE_RWLOCK(xfrm_km_lock); void km_policy_notify(struct xfrm_policy *xp, int dir, const struct km_event *c) { struct xfrm_mgr *km; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) if (km->notify_policy) km->notify_policy(xp, dir, c); - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); } void km_state_notify(struct xfrm_state *x, const struct km_event *c) { struct xfrm_mgr *km; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) if (km->notify) km->notify(x, c); - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); } EXPORT_SYMBOL(km_policy_notify); @@ -1694,13 +1693,13 @@ int km_query(struct xfrm_state *x, struct xfrm_tmpl *t, struct xfrm_policy *pol) int err = -EINVAL, acqret; struct xfrm_mgr *km; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) { + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) { acqret = km->acquire(x, t, pol); if (!acqret) err = acqret; } - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); return err; } EXPORT_SYMBOL(km_query); @@ -1710,14 +1709,14 @@ int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport) int err = -EINVAL; struct xfrm_mgr *km; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) { + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) { if (km->new_mapping) err = km->new_mapping(x, ipaddr, sport); if (!err) break; } - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); return err; } EXPORT_SYMBOL(km_new_mapping); @@ -1746,15 +1745,15 @@ int km_migrate(const struct xfrm_selector *sel, u8 dir, u8 type, int ret; struct xfrm_mgr *km; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) { + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) { if (km->migrate) { ret = km->migrate(sel, dir, type, m, num_migrate, k); if (!ret) err = ret; } } - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); return err; } EXPORT_SYMBOL(km_migrate); @@ -1766,15 +1765,15 @@ int km_report(struct net *net, u8 proto, struct xfrm_selector *sel, xfrm_address int ret; struct xfrm_mgr *km; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) { + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) { if (km->report) { ret = km->report(net, proto, sel, addr); if (!ret) err = ret; } } - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); return err; } EXPORT_SYMBOL(km_report); @@ -1798,14 +1797,14 @@ int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen goto out; err = -EINVAL; - read_lock(&xfrm_km_lock); - list_for_each_entry(km, &xfrm_km_list, list) { + rcu_read_lock(); + list_for_each_entry_rcu(km, &xfrm_km_list, list) { pol = km->compile_policy(sk, optname, data, optlen, &err); if (err >= 0) break; } - read_unlock(&xfrm_km_lock); + rcu_read_unlock(); if (err >= 0) { xfrm_sk_policy_insert(sk, err, pol); @@ -1819,20 +1818,23 @@ out: } EXPORT_SYMBOL(xfrm_user_policy); +static DEFINE_SPINLOCK(xfrm_km_lock); + int xfrm_register_km(struct xfrm_mgr *km) { - write_lock_bh(&xfrm_km_lock); - list_add_tail(&km->list, &xfrm_km_list); - write_unlock_bh(&xfrm_km_lock); + spin_lock_bh(&xfrm_km_lock); + list_add_tail_rcu(&km->list, &xfrm_km_list); + spin_unlock_bh(&xfrm_km_lock); return 0; } EXPORT_SYMBOL(xfrm_register_km); int xfrm_unregister_km(struct xfrm_mgr *km) { - write_lock_bh(&xfrm_km_lock); - list_del(&km->list); - write_unlock_bh(&xfrm_km_lock); + spin_lock_bh(&xfrm_km_lock); + list_del_rcu(&km->list); + spin_unlock_bh(&xfrm_km_lock); + synchronize_rcu(); return 0; } EXPORT_SYMBOL(xfrm_unregister_km); -- cgit v0.10.2 From d21fa2dad63677b5fd0c9942c0745c1e4f0832df Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 00:25:21 +0100 Subject: iwlwifi: don't memset scalar values The dma_addr_t type is a scalar value, so it should just be assigned, not memset. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 02c9016..ea9e991 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -436,7 +436,7 @@ static int iwl_pcie_rx_alloc(struct iwl_trans *trans) err_rb_stts: dma_free_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE, rxq->bd, rxq->bd_dma); - memset(&rxq->bd_dma, 0, sizeof(rxq->bd_dma)); + rxq->bd_dma = 0; rxq->bd = NULL; err_bd: return -ENOMEM; @@ -553,7 +553,7 @@ void iwl_pcie_rx_free(struct iwl_trans *trans) dma_free_coherent(trans->dev, sizeof(__le32) * RX_QUEUE_SIZE, rxq->bd, rxq->bd_dma); - memset(&rxq->bd_dma, 0, sizeof(rxq->bd_dma)); + rxq->bd_dma = 0; rxq->bd = NULL; if (rxq->rb_stts) @@ -562,7 +562,7 @@ void iwl_pcie_rx_free(struct iwl_trans *trans) rxq->rb_stts, rxq->rb_stts_dma); else IWL_DEBUG_INFO(trans, "Free rxq->rb_stts which is NULL\n"); - memset(&rxq->rb_stts_dma, 0, sizeof(rxq->rb_stts_dma)); + rxq->rb_stts_dma = 0; rxq->rb_stts = NULL; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index d25fc8a..3ff3e8b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -615,7 +615,7 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id) if (txq->q.n_bd) { dma_free_coherent(dev, sizeof(struct iwl_tfd) * txq->q.n_bd, txq->tfds, txq->q.dma_addr); - memset(&txq->q.dma_addr, 0, sizeof(txq->q.dma_addr)); + txq->q.dma_addr = 0; } kfree(txq->entries); -- cgit v0.10.2 From b1cf1bc160a94f2d56863522982160c9373b8860 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 10:26:17 +0100 Subject: iwlwifi: don't enable all interrupts on resuming Enabling the RF-kill interrupt is sufficient for getting RF-kill notifications, and no other interrupt is needed as the device isn't functional when suspended and will be restarted/reconfigured when mac80211 resumes it later. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index db3b055..2de5770 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -719,9 +719,6 @@ static int iwl_trans_pcie_resume(struct iwl_trans *trans) hw_rfkill = iwl_is_rfkill_set(trans); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - if (!hw_rfkill) - iwl_enable_interrupts(trans); - return 0; } #endif /* CONFIG_PM_SLEEP */ -- cgit v0.10.2 From 01387ffd19f37b4026fd0e4c32260bc25f6469d4 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 9 Jan 2013 11:37:59 +0200 Subject: iwlwifi: allow to zero SRAM Sending a NULL pointer to iwl_trans_write_mem allows now to zero SRAM. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index b0d5c71..55a140a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -391,7 +391,8 @@ struct iwl_trans; * @read_prph: read a DWORD from a periphery register * @write_prph: write a DWORD to a periphery register * @read_mem: read device's SRAM in DWORD - * @write_mem: write device's SRAM in DWORD + * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory + * will be zeroed. * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 2de5770..4028c03 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -815,7 +815,8 @@ static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) - iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); + iwl_write32(trans, HBUS_TARG_MEM_WDAT, + vals ? vals[offs] : 0); iwl_trans_release_nic_access(trans); } else { ret = -EBUSY; -- cgit v0.10.2 From 22dc3c9561825a7c2cd18d01b01358c2141a8e16 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jan 2013 00:47:07 +0100 Subject: iwlwifi: simplify scheduler memory clearing Writing 130 dwords into the device one by one is rather inefficient, every one needs to lock, grab NIC access (a few register reads/writes) and then write the address and data registers. Use the new memory clearing function to make this easier and faster. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 3ff3e8b..d3c4e8f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -641,9 +641,11 @@ static void iwl_pcie_txq_set_sched(struct iwl_trans *trans, u32 mask) void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u32 a; + int nq = trans->cfg->base_params->num_of_queues; int chan; u32 reg_val; + int clear_dwords = (SCD_TRANS_TBL_OFFSET_QUEUE(nq) - + SCD_CONTEXT_MEM_LOWER_BOUND) / sizeof(u32); /* make sure all queue are not stopped/used */ memset(trans_pcie->queue_stopped, 0, sizeof(trans_pcie->queue_stopped)); @@ -655,20 +657,10 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) WARN_ON(scd_base_addr != 0 && scd_base_addr != trans_pcie->scd_base_addr); - a = trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_LOWER_BOUND; - /* reset conext data memory */ - for (; a < trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_UPPER_BOUND; - a += 4) - iwl_trans_write_mem32(trans, a, 0); - /* reset tx status memory */ - for (; a < trans_pcie->scd_base_addr + SCD_TX_STTS_MEM_UPPER_BOUND; - a += 4) - iwl_trans_write_mem32(trans, a, 0); - for (; a < trans_pcie->scd_base_addr + - SCD_TRANS_TBL_OFFSET_QUEUE( - trans->cfg->base_params->num_of_queues); - a += 4) - iwl_trans_write_mem32(trans, a, 0); + /* reset context data, TX status and translation data */ + iwl_trans_write_mem(trans, trans_pcie->scd_base_addr + + SCD_CONTEXT_MEM_LOWER_BOUND, + NULL, clear_dwords); iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, trans_pcie->scd_bc_tbls.dma >> 10); -- cgit v0.10.2 From ddaf5a5b300b8f9d3591b509fd8bedab1c9887be Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 11:25:44 +0100 Subject: iwlwifi: enable communication with WoWLAN firmware On resuming, the opmode may have to be able to talk to the WoWLAN/D3 firmware in order to query it about its status and wakeup reasons. To do that, the opmode has to call the new d3_resume() transport API which will set up the device for command communcation. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 1ed4bc6..fef17c1 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -206,7 +206,8 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, #ifdef CONFIG_PM_SLEEP if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && - priv->trans->ops->wowlan_suspend && + priv->trans->ops->d3_suspend && + priv->trans->ops->d3_resume && device_can_wakeup(priv->trans->dev)) { hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT | @@ -426,7 +427,7 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw, if (ret) goto error; - iwl_trans_wowlan_suspend(priv->trans); + iwl_trans_d3_suspend(priv->trans); goto out; diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index ec48563..c646a90 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -225,6 +225,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) #define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) +#define FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x00c) +#define FH_RSCSR_CHNL0_RDPTR FW_RSCSR_CHNL0_RXDCB_RDPTR_REG /** * Rx Config/Status Registers (RCSR) @@ -257,6 +259,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) #define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) +#define FH_MEM_RCSR_CHNL0_RBDCB_WPTR (FH_MEM_RCSR_CHNL0 + 0x8) +#define FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (FH_MEM_RCSR_CHNL0 + 0x10) #define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 55a140a..0f85eb3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -308,6 +308,16 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) #define IWL_FRAME_LIMIT 64 /** + * enum iwl_wowlan_status - WoWLAN image/device status + * @IWL_D3_STATUS_ALIVE: firmware is still running after resume + * @IWL_D3_STATUS_RESET: device was reset while suspended + */ +enum iwl_d3_status { + IWL_D3_STATUS_ALIVE, + IWL_D3_STATUS_RESET, +}; + +/** * struct iwl_trans_config - transport configuration * * @op_mode: pointer to the upper layer. @@ -363,9 +373,12 @@ struct iwl_trans; * May sleep * @stop_device:stops the whole device (embedded CPU put to reset) * May sleep - * @wowlan_suspend: put the device into the correct mode for WoWLAN during + * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. + * @d3_resume: resume the device after WoWLAN, enabling the opmode to + * talk to the WoWLAN image to get its status. This is optional, if not + * implemented WoWLAN will not be supported. This callback may sleep. * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted. * If RFkill is asserted in the middle of a SYNC host command, it must * return -ERFKILL straight away. @@ -409,7 +422,8 @@ struct iwl_trans_ops { void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); void (*stop_device)(struct iwl_trans *trans); - void (*wowlan_suspend)(struct iwl_trans *trans); + void (*d3_suspend)(struct iwl_trans *trans); + int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status); int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); @@ -562,10 +576,17 @@ static inline void iwl_trans_stop_device(struct iwl_trans *trans) trans->state = IWL_TRANS_NO_FW; } -static inline void iwl_trans_wowlan_suspend(struct iwl_trans *trans) +static inline void iwl_trans_d3_suspend(struct iwl_trans *trans) +{ + might_sleep(); + trans->ops->d3_suspend(trans); +} + +static inline int iwl_trans_d3_resume(struct iwl_trans *trans, + enum iwl_d3_status *status) { might_sleep(); - trans->ops->wowlan_suspend(trans); + return trans->ops->d3_resume(trans, status); } static inline int iwl_trans_send_cmd(struct iwl_trans *trans, diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 8f017c3..20735a0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -357,6 +357,8 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, struct iwl_rx_cmd_buffer *rxb, int handler_status); void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, struct sk_buff_head *skbs); +void iwl_trans_pcie_tx_reset(struct iwl_trans *trans); + /***************************************************** * Error handling ******************************************************/ diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index ea9e991..9601303 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -455,6 +455,10 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) /* Stop Rx DMA */ iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + /* reset and flush pointers */ + iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0); + iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0); + iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0); /* Reset driver's Rx queue write index */ iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); @@ -491,7 +495,6 @@ int iwl_pcie_rx_init(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; - int i, err; unsigned long flags; @@ -518,6 +521,7 @@ int iwl_pcie_rx_init(struct iwl_trans *trans) rxq->read = rxq->write = 0; rxq->write_actual = 0; rxq->free_count = 0; + memset(rxq->rb_stts, 0, sizeof(*rxq->rb_stts)); spin_unlock_irqrestore(&rxq->lock, flags); iwl_pcie_rx_replenish(trans); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 4028c03..59340ff 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -75,21 +75,16 @@ #include "iwl-agn-hw.h" #include "internal.h" -static void iwl_pcie_set_pwr_vmain(struct iwl_trans *trans) +static void iwl_pcie_set_pwr(struct iwl_trans *trans, bool vaux) { -/* - * (for documentation purposes) - * to set power to V_AUX, do: - - if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) - iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - */ - - iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); + if (vaux && pci_pme_capable(to_pci_dev(trans->dev), PCI_D3cold)) + iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + else + iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); } /* PCI registers */ @@ -259,7 +254,7 @@ static int iwl_pcie_nic_init(struct iwl_trans *trans) spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - iwl_pcie_set_pwr_vmain(trans); + iwl_pcie_set_pwr(trans, false); iwl_op_mode_nic_config(trans->op_mode); @@ -545,15 +540,76 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) clear_bit(STATUS_RFKILL, &trans_pcie->status); } -static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans) +static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans) { /* let the ucode operate on its own */ iwl_write32(trans, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); iwl_disable_interrupts(trans); + iwl_pcie_disable_ict(trans); + iwl_clear_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + iwl_clear_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + /* + * reset TX queues -- some of their registers reset during S3 + * so if we don't reset everything here the D3 image would try + * to execute some invalid memory upon resume + */ + iwl_trans_pcie_tx_reset(trans); + + iwl_pcie_set_pwr(trans, true); +} + +static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, + enum iwl_d3_status *status) +{ + u32 val; + int ret; + + iwl_pcie_set_pwr(trans, false); + + val = iwl_read32(trans, CSR_RESET); + if (val & CSR_RESET_REG_FLAG_NEVO_RESET) { + *status = IWL_D3_STATUS_RESET; + return 0; + } + + /* + * Also enables interrupts - none will happen as the device doesn't + * know we're waking it up, only when the opmode actually tells it + * after this call. + */ + iwl_pcie_reset_ict(trans); + + iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + ret = iwl_poll_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + 25000); + if (ret) { + IWL_ERR(trans, "Failed to resume the device (mac ready)\n"); + return ret; + } + + iwl_trans_pcie_tx_reset(trans); + + ret = iwl_pcie_rx_init(trans); + if (ret) { + IWL_ERR(trans, "Failed to resume the device (RX reset)\n"); + return ret; + } + + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); + + *status = IWL_D3_STATUS_ALIVE; + return 0; } static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) @@ -1279,7 +1335,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .start_fw = iwl_trans_pcie_start_fw, .stop_device = iwl_trans_pcie_stop_device, - .wowlan_suspend = iwl_trans_pcie_wowlan_suspend, + .d3_suspend = iwl_trans_pcie_d3_suspend, + .d3_resume = iwl_trans_pcie_d3_resume, .send_cmd = iwl_trans_pcie_send_hcmd, diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index d3c4e8f..fd3280f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -692,6 +692,29 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) APMG_PCIDEV_STT_VAL_L1_ACT_DIS); } +void iwl_trans_pcie_tx_reset(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + int txq_id; + + for (txq_id = 0; txq_id < trans->cfg->base_params->num_of_queues; + txq_id++) { + struct iwl_txq *txq = &trans_pcie->txq[txq_id]; + + iwl_write_direct32(trans, FH_MEM_CBBC_QUEUE(txq_id), + txq->q.dma_addr >> 8); + iwl_pcie_txq_unmap(trans, txq_id); + txq->q.read_ptr = 0; + txq->q.write_ptr = 0; + } + + /* Tell NIC where to find the "keep warm" buffer */ + iwl_write_direct32(trans, FH_KW_MEM_ADDR_REG, + trans_pcie->kw.dma >> 4); + + iwl_pcie_tx_start(trans, trans_pcie->scd_base_addr); +} + /* * iwl_pcie_tx_stop - Stop all Tx DMA channels */ -- cgit v0.10.2 From 1c3fea82d6ebf33edadefed2d9ce3efa1a654338 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 2 Jan 2013 12:12:25 +0200 Subject: iwlwifi: improve the reports in TX path Also when things go wrong (queues don't get emtpy), try to get some data from the HW. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fef17c1..2da2627 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -521,9 +521,6 @@ static void iwlagn_mac_tx(struct ieee80211_hw *hw, { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - if (iwlagn_tx_skb(priv, control->sta, skb)) ieee80211_free_txskb(hw, skb); } diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index df76881..b0aad71 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -231,13 +231,11 @@ static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv, memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); if (info->flags & IEEE80211_TX_CTL_AMPDU) tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; - IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); break; case WLAN_CIPHER_SUITE_TKIP: tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); - IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n"); break; case WLAN_CIPHER_SUITE_WEP104: @@ -355,8 +353,6 @@ int iwlagn_tx_skb(struct iwl_priv *priv, } } - IWL_DEBUG_TX(priv, "station Id %d\n", sta_id); - if (sta) sta_priv = (void *)sta->drv_priv; @@ -472,6 +468,9 @@ int iwlagn_tx_skb(struct iwl_priv *priv, WARN_ON_ONCE(is_agg && priv->queue_to_mac80211[txq_id] != info->hw_queue); + IWL_DEBUG_TX(priv, "TX to [%d|%d] Q:%d - seq: 0x%x\n", sta_id, tid, + txq_id, seq_number); + if (iwl_trans_tx(priv->trans, skb, dev_cmd, txq_id)) goto drop_unlock_sta; @@ -953,12 +952,6 @@ static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, if (status & (AGG_TX_STATE_FEW_BYTES_MSK | AGG_TX_STATE_ABORT_MSK)) continue; - - IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), " - "try-count (0x%08x)\n", - iwl_get_agg_tx_fail_reason(fstatus), - fstatus & AGG_TX_STATUS_MSK, - fstatus & AGG_TX_TRY_MSK); } } @@ -1212,16 +1205,27 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, freed++; } - WARN_ON(!is_agg && freed != 1); + if (!is_agg && freed != 1) + IWL_ERR(priv, "Q: %d, freed %d\n", txq_id, freed); /* * An offchannel frame can be send only on the AUX queue, where * there is no aggregation (and reordering) so it only is single * skb is expected to be processed. */ - WARN_ON(is_offchannel_skb && freed != 1); + if (is_offchannel_skb && freed != 1) + IWL_ERR(priv, "OFFCHANNEL SKB freed %d\n", freed); } + IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x)\n", txq_id, + iwl_get_tx_fail_reason(status), status); + + IWL_DEBUG_TX_REPLY(priv, + "\t\t\t\tinitial_rate 0x%x retries %d, idx=%d ssn=%d seq_ctl=0x%x\n", + le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame, SEQ_TO_INDEX(sequence), ssn, + le16_to_cpu(tx_resp->seq_ctl)); + iwl_check_abort_status(priv, tx_resp->frame_count, status); spin_unlock(&priv->sta_lock); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 59340ff..c57641e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -890,6 +890,8 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) struct iwl_queue *q; int cnt; unsigned long now = jiffies; + u32 scd_sram_addr; + u8 buf[16]; int ret = 0; /* waiting for all the tx frames complete might take a while */ @@ -903,11 +905,50 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) msleep(1); if (q->read_ptr != q->write_ptr) { - IWL_ERR(trans, "fail to flush all tx fifo queues\n"); + IWL_ERR(trans, + "fail to flush all tx fifo queues Q %d\n", cnt); ret = -ETIMEDOUT; break; } } + + if (!ret) + return 0; + + IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n", + txq->q.read_ptr, txq->q.write_ptr); + + scd_sram_addr = trans_pcie->scd_base_addr + + SCD_TX_STTS_QUEUE_OFFSET(txq->q.id); + iwl_trans_read_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf)); + + iwl_print_hex_error(trans, buf, sizeof(buf)); + + for (cnt = 0; cnt < FH_TCSR_CHNL_NUM; cnt++) + IWL_ERR(trans, "FH TRBs(%d) = 0x%08x\n", cnt, + iwl_read_direct32(trans, FH_TX_TRB_REG(cnt))); + + for (cnt = 0; cnt < trans->cfg->base_params->num_of_queues; cnt++) { + u32 status = iwl_read_prph(trans, SCD_QUEUE_STATUS_BITS(cnt)); + u8 fifo = (status >> SCD_QUEUE_STTS_REG_POS_TXF) & 0x7; + bool active = !!(status & BIT(SCD_QUEUE_STTS_REG_POS_ACTIVE)); + u32 tbl_dw = + iwl_trans_read_mem32(trans, trans_pcie->scd_base_addr + + SCD_TRANS_TBL_OFFSET_QUEUE(cnt)); + + if (cnt & 0x1) + tbl_dw = (tbl_dw & 0xFFFF0000) >> 16; + else + tbl_dw = tbl_dw & 0x0000FFFF; + + IWL_ERR(trans, + "Q %d is %sactive and mapped to fifo %d ra_tid 0x%04x [%d,%d]\n", + cnt, active ? "" : "in", fifo, tbl_dw, + iwl_read_prph(trans, + SCD_QUEUE_RDPTR(cnt)) & (txq->q.n_bd - 1), + iwl_read_prph(trans, SCD_QUEUE_WRPTR(cnt))); + } + return ret; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index fd3280f..a93f067 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -309,6 +309,9 @@ void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq) return; } + IWL_DEBUG_TX(trans, "Q:%d WR: 0x%x\n", txq_id, + txq->q.write_ptr); + iwl_write_direct32(trans, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8)); @@ -1660,10 +1663,6 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - IWL_DEBUG_TX(trans, "sequence nr = 0X%x\n", - le16_to_cpu(dev_cmd->hdr.sequence)); - IWL_DEBUG_TX(trans, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - /* Set up entry for this TFD in Tx byte-count array */ iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); -- cgit v0.10.2 From 0ae997dc75efb60d47f0c71890f1e972f7d462c1 Mon Sep 17 00:00:00 2001 From: Yacine Belkadi Date: Sat, 12 Jan 2013 13:54:14 +0100 Subject: {cfg,mac}80211.h: fix some kernel-doc warnings When building the 80211 DocBook, scripts/kernel-doc reports the following type of warnings: Warning(include/net/cfg80211.h:334): No description found for return value of 'cfg80211_get_chandef_type' These warnings are only reported when scripts/kernel-doc runs in verbose mode. To fix these use "Return:" to describe function return values. Signed-off-by: Yacine Belkadi [adjust for freq_reg_info() change] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 4275127..3d8717a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -326,7 +326,7 @@ struct cfg80211_chan_def { * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * - * Returns the old channel type (NOHT, HT20, HT40+/-) from a given + * Return: The old channel type (NOHT, HT20, HT40+/-) from a given * chandef, which must have a bandwidth allowing this conversion. */ static inline enum nl80211_channel_type @@ -364,7 +364,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %true if the channels defined by the channel definitions are + * Return: %true if the channels defined by the channel definitions are * identical, %false otherwise. */ static inline bool @@ -382,7 +382,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %NULL if the given channel definitions are incompatible, + * Return: %NULL if the given channel definitions are incompatible, * chandef1 or chandef2 otherwise. */ const struct cfg80211_chan_def * @@ -392,6 +392,7 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, /** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check + * Return: %true if the channel definition is valid. %false otherwise. */ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); @@ -399,7 +400,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); * cfg80211_chandef_usable - check if secondary channels can be used * @wiphy: the wiphy to validate against * @chandef: the channel definition to check - * @prohibited_flags: the regulatory chanenl flags that must not be set + * @prohibited_flags: the regulatory channel flags that must not be set + * Return: %true if secondary channels are usable. %false otherwise. */ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, @@ -1266,7 +1268,7 @@ struct cfg80211_bss { * * Note that the return value is an RCU-protected pointer, so * rcu_read_lock() must be held when calling this function. - * Returns %NULL if not found. + * Return: %NULL if not found. */ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); @@ -2409,6 +2411,7 @@ static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) * wiphy_priv - return priv from wiphy * * @wiphy: the wiphy whose priv pointer to return + * Return: The priv of @wiphy. */ static inline void *wiphy_priv(struct wiphy *wiphy) { @@ -2420,6 +2423,7 @@ static inline void *wiphy_priv(struct wiphy *wiphy) * priv_to_wiphy - return the wiphy containing the priv * * @priv: a pointer previously returned by wiphy_priv + * Return: The wiphy of @priv. */ static inline struct wiphy *priv_to_wiphy(void *priv) { @@ -2442,6 +2446,7 @@ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) * wiphy_dev - get wiphy dev pointer * * @wiphy: The wiphy whose device struct to look up + * Return: The dev of @wiphy. */ static inline struct device *wiphy_dev(struct wiphy *wiphy) { @@ -2452,6 +2457,7 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy) * wiphy_name - get wiphy name * * @wiphy: The wiphy whose name to return + * Return: The name of @wiphy. */ static inline const char *wiphy_name(const struct wiphy *wiphy) { @@ -2467,8 +2473,8 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) * Create a new wiphy and associate the given operations with it. * @sizeof_priv bytes are allocated for private use. * - * The returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. + * Return: A pointer to the new wiphy. This pointer must be + * assigned to each netdev's ieee80211_ptr for proper operation. */ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); @@ -2477,7 +2483,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); * * @wiphy: The wiphy to register. * - * Returns a non-negative wiphy index or a negative error code. + * Return: A non-negative wiphy index or a negative error code. */ extern int wiphy_register(struct wiphy *wiphy); @@ -2626,6 +2632,7 @@ static inline u8 *wdev_address(struct wireless_dev *wdev) * wdev_priv - return wiphy priv from wireless_dev * * @wdev: The wireless device whose wiphy's priv pointer to return + * Return: The wiphy priv of @wdev. */ static inline void *wdev_priv(struct wireless_dev *wdev) { @@ -2643,12 +2650,14 @@ static inline void *wdev_priv(struct wireless_dev *wdev) * ieee80211_channel_to_frequency - convert channel number to frequency * @chan: channel number * @band: band, necessary due to channel number overlap + * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. */ extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); /** * ieee80211_frequency_to_channel - convert frequency to channel number * @freq: center frequency + * Return: The corresponding channel, or 0 if the conversion failed. */ extern int ieee80211_frequency_to_channel(int freq); @@ -2665,6 +2674,7 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, * ieee80211_get_channel - get channel struct from wiphy for specified frequency * @wiphy: the struct wiphy to get the channel for * @freq: the center frequency of the channel + * Return: The channel struct from @wiphy at @freq. */ static inline struct ieee80211_channel * ieee80211_get_channel(struct wiphy *wiphy, int freq) @@ -2679,10 +2689,10 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) * @basic_rates: bitmap of basic rates * @bitrate: the bitrate for which to find the basic rate * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. + * Return: The basic rate corresponding to a given bitrate, that + * is the next lower bitrate contained in the basic rate map, + * which is, for this function, given as a bitmap of indices of + * rates in the band's bitrate table. */ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, @@ -2775,18 +2785,21 @@ extern const unsigned char bridge_tunnel_header[6]; /** * ieee80211_get_hdrlen_from_skb - get header length from data * + * @skb: the frame + * * Given an skb with a raw 802.11 header at the data pointer this function - * returns the 802.11 header length in bytes (not including encryption - * headers). If the data in the sk_buff is too short to contain a valid 802.11 - * header the function returns 0. + * returns the 802.11 header length. * - * @skb: the frame + * Return: The 802.11 header length in bytes (not including encryption + * headers). Or 0 if the data in the sk_buff is too short to contain a valid + * 802.11 header. */ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_hdrlen - get header length in bytes from frame control * @fc: frame control field in little-endian format + * Return: The header length in bytes. */ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); @@ -2794,7 +2807,7 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); * ieee80211_get_mesh_hdrlen - get mesh extension header length * @meshhdr: the mesh extension header, only the flags field * (first byte) will be accessed - * Returns the length of the extension header, which is always at + * Return: The length of the extension header, which is always at * least 6 bytes and at most 18 if address 5 and 6 are present. */ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); @@ -2812,6 +2825,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * @skb: the 802.11 data frame * @addr: the device MAC address * @iftype: the virtual interface type + * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype); @@ -2823,6 +2837,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * @iftype: the virtual interface type * @bssid: the network bssid (used only for iftype STATION and ADHOC) * @qos: build 802.11 QoS data frame + * Return: 0 on success, or a negative error code. */ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype, u8 *bssid, bool qos); @@ -2850,6 +2865,7 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, /** * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame * @skb: the data frame + * Return: The 802.1p/1d tag. */ unsigned int cfg80211_classify8021d(struct sk_buff *skb); @@ -2860,12 +2876,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the element ID could - * not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data), or a pointer to the first byte of the requested + * element, that is the byte containing the element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data. */ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); @@ -2877,12 +2894,13 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the vendor specific element ID - * could not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the vendor specific element ID could not be found or if the + * element is invalid (claims to be longer than the given data), or a pointer to + * the first byte of the requested element, that is the byte containing the + * element ID. + * + * Note: There are no checks on the element length other than having to fit into + * the given data. */ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, const u8 *ies, int len); @@ -2915,6 +2933,8 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, * * Drivers should check the return value, its possible you can get * an -ENOMEM. + * + * Return: 0 on success. -ENOMEM. */ extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); @@ -2944,13 +2964,13 @@ extern void wiphy_apply_custom_regulatory( * it wants to follow we respect that unless a country IE has been received * and processed already. * - * When an error occurs, for example if no rule can be found, the return value - * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain - * the numeric return value. The numeric return value will be -ERANGE if we - * determine the given center_freq does not even have a regulatory rule for a - * frequency range in the center_freq's band. See freq_in_rule_band() for our - * current definition of a band -- this is purely subjective and right now it's - * 802.11 specific. + * Return: A valid pointer, or, when an error occurs, for example if no rule + * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to + * check and PTR_ERR() to obtain the numeric return value. The numeric return + * value will be -ERANGE if we determine the given center_freq does not even + * have a regulatory rule for a frequency range in the center_freq's band. + * See freq_in_rule_band() for our current definition of a band -- this is + * purely subjective and right now it's 802.11 specific. */ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, u32 center_freq); @@ -3000,7 +3020,8 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy); * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss_frame(struct wiphy *wiphy, @@ -3025,7 +3046,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, @@ -3302,16 +3324,18 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); * the testmode command. Since it is intended for a reply, calling * it outside of the @testmode_cmd operation is invalid. * - * The returned skb (or %NULL if any errors happen) is pre-filled - * with the wiphy index and set up in a way that any data that is - * put into the skb (with skb_put(), nla_put() or similar) will end - * up being within the %NL80211_ATTR_TESTDATA attribute, so all that - * needs to be done with the skb is adding data for the corresponding - * userspace tool which can then read that data out of the testdata - * attribute. You must not modify the skb in any other way. + * The returned skb is pre-filled with the wiphy index and set up in + * a way that any data that is put into the skb (with skb_put(), + * nla_put() or similar) will end up being within the + * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done + * with the skb is adding data for the corresponding userspace tool + * which can then read that data out of the testdata attribute. You + * must not modify the skb in any other way. * * When done, call cfg80211_testmode_reply() with the skb and return * its error code as the result of the @testmode_cmd operation. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen); @@ -3321,11 +3345,12 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, * @skb: The skb, must have been allocated with * cfg80211_testmode_alloc_reply_skb() * - * Returns an error code or 0 on success, since calling this - * function will usually be the last thing before returning - * from the @testmode_cmd you should return the error code. - * Note that this function consumes the skb regardless of the - * return value. + * Since calling this function will usually be the last thing + * before returning from the @testmode_cmd you should return + * the error code. Note that this function consumes the skb + * regardless of the return value. + * + * Return: An error code or 0 on success. */ int cfg80211_testmode_reply(struct sk_buff *skb); @@ -3339,14 +3364,16 @@ int cfg80211_testmode_reply(struct sk_buff *skb); * This function allocates and pre-fills an skb for an event on the * testmode multicast group. * - * The returned skb (or %NULL if any errors happen) is set up in the - * same way as with cfg80211_testmode_alloc_reply_skb() but prepared - * for an event. As there, you should simply add data to it that will - * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must - * not modify the skb in any other way. + * The returned skb is set up in the same way as with + * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As + * there, you should simply add data to it that will then end up in the + * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb + * in any other way. * * When done filling the skb, call cfg80211_testmode_event() with the * skb to send the event. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp); @@ -3527,13 +3554,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * @len: length of the frame data * @gfp: context flags * - * Returns %true if a user space application has registered for this frame. + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + * + * Return: %true if a user space application has registered for this frame. * For action frames, that makes it responsible for rejecting unrecognized * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. - * - * This function is called whenever an Action frame is received for a station - * mode interface, but is not processed in kernel. */ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, gfp_t gfp); @@ -3625,7 +3652,7 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, * This function is used in AP mode (only!) to inform userspace that * a spurious class 3 frame was received, to be able to deauth the * sender. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_spurious_frame(struct net_device *dev, @@ -3641,7 +3668,7 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev, * an associated station sent a 4addr frame but that wasn't expected. * It is allowed and desirable to send this event only once for each * station to avoid event flooding. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, @@ -3679,8 +3706,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, * @wiphy: the wiphy * @chandef: the channel definition * - * This function returns true if there is no secondary channel or the secondary - * channel(s) can be used for beaconing (i.e. is not a radar channel etc.) + * Return: %true if there is no secondary channel or the secondary channel(s) + * can be used for beaconing (i.e. is not a radar channel etc.) */ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef); @@ -3750,9 +3777,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev); * The function finds a given P2P attribute in the (vendor) IEs and * copies its contents to the given buffer. * - * The return value is a negative error code (-%EILSEQ or -%ENOENT) if - * the data is malformed or the attribute can't be found (respectively), - * or the length of the found attribute (which can be zero). + * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is + * malformed or the attribute can't be found (respectively), or the + * length of the found attribute (which can be zero). */ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 23daed3..79bc870 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1522,6 +1522,8 @@ struct ieee80211_hw { * structure can then access it via hw->priv. Note that mac802111 drivers should * not use wiphy_priv() to try to get their private driver structure as this * is already used internally by mac80211. + * + * Return: The mac80211 driver hw struct of @wiphy. */ struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy); @@ -2673,6 +2675,8 @@ struct ieee80211_ops { * * @priv_data_len: length of private data * @ops: callbacks for this device + * + * Return: A pointer to the new hardware device, or %NULL on error. */ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops); @@ -2685,6 +2689,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, * need to fill the contained wiphy's information. * * @hw: the device to register as returned by ieee80211_alloc_hw() + * + * Return: 0 on success. An error code otherwise. */ int ieee80211_register_hw(struct ieee80211_hw *hw); @@ -2731,6 +2737,8 @@ extern char *__ieee80211_create_tpt_led_trigger( * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) { @@ -2750,6 +2758,8 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) { @@ -2769,6 +2779,8 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw) { @@ -2788,6 +2800,8 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw) * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw) { @@ -2805,9 +2819,10 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw) * @blink_table: the blink table -- needs to be ordered by throughput * @blink_table_len: size of the blink table * - * This function returns %NULL (in case of error, or if no LED - * triggers are configured) or the name of the new trigger. - * This function must be called before ieee80211_register_hw(). + * Return: %NULL (in case of error, or if no LED triggers are + * configured) or the name of the new trigger. + * + * Note: This function must be called before ieee80211_register_hw(). */ static inline char * ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags, @@ -2940,10 +2955,10 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, * Calls to this function for a single hardware must be synchronized against * each other. * - * The function returns -EINVAL when the requested PS mode is already set. - * * @sta: currently connected sta * @start: start or stop PS + * + * Return: 0 on success. -EINVAL when the requested PS mode is already set. */ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start); @@ -2957,6 +2972,8 @@ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start); * * @sta: currently connected sta * @start: start or stop PS + * + * Return: Like ieee80211_sta_ps_transition(). */ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, bool start) @@ -3094,6 +3111,8 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); * according to the current DTIM parameters/TIM bitmap. * * The driver is responsible for freeing the returned skb. + * + * Return: The beacon template. %NULL on error. */ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3105,6 +3124,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from the add_interface callback. * * See ieee80211_beacon_get_tim(). + * + * Return: See ieee80211_beacon_get_tim(). */ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif) @@ -3121,6 +3142,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * hardware. The destination address should be set by the caller. * * Can only be called in AP mode. + * + * Return: The Probe Response template. %NULL on error. */ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -3136,6 +3159,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, * * Note: Caller (or hardware) is responsible for setting the * &IEEE80211_FCTL_PM bit. + * + * Return: The PS Poll template. %NULL on error. */ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -3151,6 +3176,8 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, * * Note: Caller (or hardware) is responsible for setting the * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields. + * + * Return: The nullfunc template. %NULL on error. */ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -3165,6 +3192,8 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, * * Creates a Probe Request template which can, for example, be uploaded to * hardware. + * + * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3200,6 +3229,8 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * If the RTS is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive * the duration field value in little-endian byteorder. + * + * Return: The duration. */ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, @@ -3235,6 +3266,8 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, * If the CTS-to-self is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive * the duration field value in little-endian byteorder. + * + * Return: The duration. */ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3251,6 +3284,8 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, * * Calculate the duration field of some generic frame, given its * length and transmission rate (in 100kbps). + * + * Return: The duration. */ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3267,9 +3302,10 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, * hardware/firmware does not implement buffering of broadcast/multicast * frames when power saving is used, 802.11 code buffers them in the host * memory. The low-level driver uses this function to fetch next buffered - * frame. In most cases, this is used when generating beacon frame. This - * function returns a pointer to the next buffered skb or NULL if no more - * buffered frames are available. + * frame. In most cases, this is used when generating beacon frame. + * + * Return: A pointer to the next buffered skb or NULL if no more buffered + * frames are available. * * Note: buffered frames are returned only after DTIM beacon frame was * generated with ieee80211_beacon_get() and the low-level driver must thus @@ -3449,6 +3485,8 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); * @queue: queue number (counted from zero). * * Drivers should use this function instead of netif_stop_queue. + * + * Return: %true if the queue is stopped. %false otherwise. */ int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue); @@ -3646,7 +3684,9 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, * @vif: virtual interface to look for station on * @addr: station's address * - * This function must be called under RCU lock and the + * Return: The station, if found. %NULL otherwise. + * + * Note: This function must be called under RCU lock and the * resulting pointer is only valid under RCU lock as well. */ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, @@ -3659,7 +3699,9 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, * @addr: remote station's address * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'. * - * This function must be called under RCU lock and the + * Return: The station, if found. %NULL otherwise. + * + * Note: This function must be called under RCU lock and the * resulting pointer is only valid under RCU lock as well. * * NOTE: You may pass NULL for localaddr, but then you will just get @@ -3789,7 +3831,9 @@ void ieee80211_iter_chan_contexts_atomic( * information. This function must only be called from within the * .bss_info_changed callback function and only in managed mode. The function * is only useful when the interface is associated, otherwise it will return - * NULL. + * %NULL. + * + * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -4136,12 +4180,14 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); /** - * ieee80211_ave_rssi - report the average rssi for the specified interface + * ieee80211_ave_rssi - report the average RSSI for the specified interface * * @vif: the specified virtual interface * - * This function return the average rssi value for the requested interface. - * It assumes that the given vif is valid. + * Note: This function assumes that the given vif is valid. + * + * Return: The average RSSI value for the requested interface, or 0 if not + * applicable. */ int ieee80211_ave_rssi(struct ieee80211_vif *vif); -- cgit v0.10.2 From d888130a024d1d1e8b2c3d0c9841a218fc0aed9e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 10 Jan 2013 23:55:33 +0100 Subject: mac80211: fix resume from WoWLAN My commit 529ba6e9313dbe60dab7e72c6fdf647a012e9f5b ("mac80211: clean up association better in suspend") introduced a bug when resuming from WoWLAN when a device reset is desired. This case must not use the suspend_bss_conf as it hasn't been stored. Signed-off-by: Johannes Berg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1b94207..0ad51e1 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1358,8 +1358,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_chanctx *ctx; struct sta_info *sta; int res, i; - #ifdef CONFIG_PM + bool reconfig_due_to_wowlan = false; + if (local->suspended) local->resuming = true; @@ -1377,6 +1378,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) * res is 1, which means the driver requested * to go through a regular reset on wakeup. */ + reconfig_due_to_wowlan = true; } #endif /* everything else happens only if HW was up & running */ @@ -1527,7 +1529,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) BSS_CHANGED_TXPOWER; #ifdef CONFIG_PM - if (local->resuming) + if (local->resuming && !reconfig_due_to_wowlan) sdata->vif.bss_conf = sdata->suspend_bss_conf; #endif -- cgit v0.10.2 From 8f21b0adfe95907926da1bb0bcd3382b13d0143d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Jan 2013 00:28:01 +0100 Subject: mac80211: call restart complete at wowlan resume time When the driver's resume function can't completely restore the configuration in the device, it returns 1 from the callback which will be treated like a HW restart request, but done directly. In this case, also call the driver's restart_complete() function so it can finish the reconfiguration there. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 79bc870..3037f49 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2488,7 +2488,10 @@ enum ieee80211_rate_control_changed { * * @restart_complete: Called after a call to ieee80211_restart_hw(), when the * reconfiguration has completed. This can help the driver implement the - * reconfiguration step. This callback may sleep. + * reconfiguration step. Also called when reconfiguring because the + * driver's resume function returned 1, as this is just like an "inline" + * hardware restart. This callback may sleep. + * */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 0ad51e1..7519018 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1358,9 +1358,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_chanctx *ctx; struct sta_info *sta; int res, i; -#ifdef CONFIG_PM bool reconfig_due_to_wowlan = false; +#ifdef CONFIG_PM if (local->suspended) local->resuming = true; @@ -1656,10 +1656,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) * If this is for hw restart things are still running. * We may want to change that later, however. */ - if (!local->suspended) { + if (!local->suspended || reconfig_due_to_wowlan) drv_restart_complete(local); + + if (!local->suspended) return 0; - } #ifdef CONFIG_PM /* first set suspended false, then resuming */ -- cgit v0.10.2 From ee1f668136b2fb6640ee2d54c2a525ea41f98211 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 10 Jan 2013 23:31:54 +0800 Subject: mac80211: allow disable power save in mesh Allow mesh interface to disable the power save which is by default turn on in certain chipset. Testing with 2 units of ZCN-1523H-5-16 featuring AR9280 chipset which have power save enabled by default. Constant reset if the average signal of the peer mesh STA is below -80 dBm and power save is enabled. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 7d290bc..817992b 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2232,7 +2232,8 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - if (sdata->vif.type != NL80211_IFTYPE_STATION) + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) return -EOPNOTSUPP; if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) -- cgit v0.10.2 From 0d735f13d8842d94ea8236baf12db3bea7daaf98 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:26 +0000 Subject: vmxnet3: use netdev_alloc_skb_ip_align Use netdev_alloc_skb_align, rather than open code using dev_alloc_skb. Change allocation at startup to use GFP_KERNEL. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index dc8913c..3402a0c 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -580,15 +580,14 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, if (rbi->buf_type == VMXNET3_RX_BUF_SKB) { if (rbi->skb == NULL) { - rbi->skb = dev_alloc_skb(rbi->len + - NET_IP_ALIGN); + rbi->skb = __netdev_alloc_skb_ip_align(adapter->netdev, + rbi->len, + GFP_KERNEL); if (unlikely(rbi->skb == NULL)) { rq->stats.rx_buf_alloc_failure++; break; } - rbi->skb->dev = adapter->netdev; - skb_reserve(rbi->skb, NET_IP_ALIGN); rbi->dma_addr = pci_map_single(adapter->pdev, rbi->skb->data, rbi->len, PCI_DMA_FROMDEVICE); @@ -1221,7 +1220,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, skip_page_frags = false; ctx->skb = rbi->skb; - new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN); + new_skb = netdev_alloc_skb_ip_align(adapter->netdev, + rbi->len); if (new_skb == NULL) { /* Skb allocation failed, do not handover this * skb to stack. Reuse it. Drop the existing pkt @@ -1239,8 +1239,6 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, skb_put(ctx->skb, rcd->len); /* Immediate refill */ - new_skb->dev = adapter->netdev; - skb_reserve(new_skb, NET_IP_ALIGN); rbi->skb = new_skb; rbi->dma_addr = pci_map_single(adapter->pdev, rbi->skb->data, rbi->len, -- cgit v0.10.2 From 69b9a712661cbd43bc9c20575c947ddb34314ac9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:27 +0000 Subject: vmxnet3: remove unnecessary bookkeeping The uncommitted[] array was set but never used except in a debug message. Remove it. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 3402a0c..99ef9ed 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -628,12 +628,10 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, num_allocated++; vmxnet3_cmd_ring_adv_next2fill(ring); } - rq->uncommitted[ring_idx] += num_allocated; dev_dbg(&adapter->netdev->dev, - "alloc_rx_buf: %d allocated, next2fill %u, next2comp " - "%u, uncommitted %u\n", num_allocated, ring->next2fill, - ring->next2comp, rq->uncommitted[ring_idx]); + "alloc_rx_buf: %d allocated, next2fill %u, next2comp %u\n", + num_allocated, ring->next2fill, ring->next2comp); /* so that the device can distinguish a full ring and an empty ring */ BUG_ON(num_allocated != 0 && ring->next2fill == ring->next2comp); @@ -1331,7 +1329,6 @@ rcd_done: VMXNET3_WRITE_BAR0_REG(adapter, rxprod_reg[ring_idx] + rq->qid * 8, ring->next2fill); - rq->uncommitted[ring_idx] = 0; } vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring); @@ -1376,7 +1373,6 @@ vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq, rq->rx_ring[ring_idx].gen = VMXNET3_INIT_GEN; rq->rx_ring[ring_idx].next2fill = rq->rx_ring[ring_idx].next2comp = 0; - rq->uncommitted[ring_idx] = 0; } rq->comp_ring.gen = VMXNET3_INIT_GEN; @@ -1457,7 +1453,6 @@ vmxnet3_rq_init(struct vmxnet3_rx_queue *rq, /* reset internal state and allocate buffers for both rings */ for (i = 0; i < 2; i++) { rq->rx_ring[i].next2fill = rq->rx_ring[i].next2comp = 0; - rq->uncommitted[i] = 0; memset(rq->rx_ring[i].base, 0, rq->rx_ring[i].size * sizeof(struct Vmxnet3_RxDesc)); diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index fc46a81..55465ed 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -276,8 +276,6 @@ struct vmxnet3_rx_queue { struct vmxnet3_rx_ctx rx_ctx; u32 qid; /* rqID in RCD for buffer from 1st ring */ u32 qid2; /* rqID in RCD for buffer from 2nd ring */ - u32 uncommitted[2]; /* # of buffers allocated since last RXPROD - * update */ struct vmxnet3_rx_buf_info *buf_info[2]; struct Vmxnet3_RxQueueCtrl *shared; struct vmxnet3_rq_driver_stats stats; -- cgit v0.10.2 From 4bad25fa7ecedd32424a1a6412c3b3e91c4ae9f1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:28 +0000 Subject: vmxnet3: fix messages printed before registration This messages that occur during boot time from this device when netdev_err is called before calling register_netdevice(). Switch to using dev_XXX macros which correlate message with PCI info which is available. Rather than fixing the features message, just remove it since the information is redundant and available through ethtool. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 99ef9ed..7b10d9c 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2671,10 +2671,6 @@ vmxnet3_declare_features(struct vmxnet3_adapter *adapter, bool dma64) netdev->vlan_features = netdev->hw_features & ~(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_FILTER; - - netdev_info(adapter->netdev, - "features: sg csum vlan jf tso tsoIPv6 lro%s\n", - dma64 ? " highDMA" : ""); } @@ -2717,7 +2713,7 @@ vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter, adapter->intr.num_intrs = vectors; return 0; } else if (err < 0) { - netdev_err(adapter->netdev, + dev_err(&adapter->netdev->dev, "Failed to enable MSI-X, error: %d\n", err); vectors = 0; } else if (err < vector_threshold) { @@ -2726,15 +2722,16 @@ vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter, /* If fails to enable required number of MSI-x vectors * try enabling minimum number of vectors required. */ - netdev_err(adapter->netdev, - "Failed to enable %d MSI-X, trying %d instead\n", + dev_err(&adapter->netdev->dev, + "Failed to enable %d MSI-X, trying %d instead\n", vectors, vector_threshold); vectors = vector_threshold; } } - netdev_info(adapter->netdev, - "Number of MSI-X interrupts which can be allocated are lower than min threshold required.\n"); + dev_info(&adapter->pdev->dev, + "Number of MSI-X interrupts which can be allocated " + "is lower than min threshold required.\n"); return err; } @@ -2800,9 +2797,9 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) return; /* If we cannot allocate MSIx vectors use only one rx queue */ - netdev_info(adapter->netdev, - "Failed to enable MSI-X, error %d . Limiting #rx queues to 1, try MSI.\n", - err); + dev_info(&adapter->pdev->dev, + "Failed to enable MSI-X, error %d. " + "Limiting #rx queues to 1, try MSI.\n", err); adapter->intr.type = VMXNET3_IT_MSI; } -- cgit v0.10.2 From fdcd79b94b24418133248e89887b6d432cf700b3 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:29 +0000 Subject: vmxnet3: use netdev_dbg Use netdev_dbg() rather than dev_dbg() because the former prints the device name which is more useful than the pci name. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 7b10d9c..c566b73 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -629,7 +629,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, vmxnet3_cmd_ring_adv_next2fill(ring); } - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "alloc_rx_buf: %d allocated, next2fill %u, next2comp %u\n", num_allocated, ring->next2fill, ring->next2comp); @@ -688,7 +688,7 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, tbi = tq->buf_info + tq->tx_ring.next2fill; tbi->map_type = VMXNET3_MAP_NONE; - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "txd[%u]: 0x%Lx 0x%x 0x%x\n", tq->tx_ring.next2fill, le64_to_cpu(ctx->sop_txd->txd.addr), @@ -728,7 +728,7 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, gdesc->dword[2] = cpu_to_le32(dw2); gdesc->dword[3] = 0; - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "txd[%u]: 0x%Lx 0x%x 0x%x\n", tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); @@ -768,7 +768,7 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, gdesc->dword[2] = cpu_to_le32(dw2); gdesc->dword[3] = 0; - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "txd[%u]: 0x%llu %u %u\n", tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); @@ -868,7 +868,7 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, tdd = tq->data_ring.base + tq->tx_ring.next2fill; memcpy(tdd->data, skb->data, ctx->copy_size); - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "copy %u bytes to dataRing[%u]\n", ctx->copy_size, tq->tx_ring.next2fill); return 1; @@ -974,7 +974,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) { tq->stats.tx_ring_full++; - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "tx queue stopped on %s, next2comp %u" " next2fill %u\n", adapter->netdev->name, tq->tx_ring.next2comp, tq->tx_ring.next2fill); @@ -1057,7 +1057,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, (struct Vmxnet3_TxDesc *)ctx.sop_txd); gdesc = ctx.sop_txd; #endif - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", (u32)(ctx.sop_txd - tq->tx_ring.base), le64_to_cpu(gdesc->txd.addr), @@ -1210,7 +1210,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, if (unlikely(rcd->len == 0)) { /* Pretend the rx buffer is skipped. */ BUG_ON(!(rcd->sop && rcd->eop)); - dev_dbg(&adapter->netdev->dev, + netdev_dbg(adapter->netdev, "rxRing[%u][%u] 0 length\n", ring_idx, idx); goto rcd_done; @@ -2211,7 +2211,7 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) u32 ret; unsigned long flags; - dev_dbg(&adapter->netdev->dev, "%s: skb_buf_size %d, rx_buf_per_pkt %d," + netdev_dbg(adapter->netdev, "%s: skb_buf_size %d, rx_buf_per_pkt %d," " ring sizes %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size, adapter->rx_buf_per_pkt, adapter->tx_queue[0].tx_ring.size, -- cgit v0.10.2 From 204a6e659439b7b5818e52cb530269905c04815a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:30 +0000 Subject: vmxnet3: use netdev_ printk wrappers Use the standard netdev_xxx() and dev_xxx() wrappers to format log messages. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index c566b73..d862937 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -152,8 +152,8 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue) adapter->link_speed = ret >> 16; if (ret & 1) { /* Link is up. */ - printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n", - adapter->netdev->name, adapter->link_speed); + netdev_info(adapter->netdev, "NIC Link is Up %d Mbps\n", + adapter->link_speed); if (!netif_carrier_ok(adapter->netdev)) netif_carrier_on(adapter->netdev); @@ -163,8 +163,7 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue) adapter); } } else { - printk(KERN_INFO "%s: NIC Link is Down\n", - adapter->netdev->name); + netdev_info(adapter->netdev, "NIC Link is Down\n"); if (netif_carrier_ok(adapter->netdev)) netif_carrier_off(adapter->netdev); @@ -510,8 +509,7 @@ vmxnet3_tq_create(struct vmxnet3_tx_queue *tq, * sizeof(struct Vmxnet3_TxDesc), &tq->tx_ring.basePA); if (!tq->tx_ring.base) { - printk(KERN_ERR "%s: failed to allocate tx ring\n", - adapter->netdev->name); + netdev_err(adapter->netdev, "failed to allocate tx ring\n"); goto err; } @@ -520,8 +518,7 @@ vmxnet3_tq_create(struct vmxnet3_tx_queue *tq, sizeof(struct Vmxnet3_TxDataDesc), &tq->data_ring.basePA); if (!tq->data_ring.base) { - printk(KERN_ERR "%s: failed to allocate data ring\n", - adapter->netdev->name); + netdev_err(adapter->netdev, "failed to allocate data ring\n"); goto err; } @@ -530,8 +527,7 @@ vmxnet3_tq_create(struct vmxnet3_tx_queue *tq, sizeof(struct Vmxnet3_TxCompDesc), &tq->comp_ring.basePA); if (!tq->comp_ring.base) { - printk(KERN_ERR "%s: failed to allocate tx comp ring\n", - adapter->netdev->name); + netdev_err(adapter->netdev, "failed to allocate tx comp ring\n"); goto err; } @@ -1511,8 +1507,8 @@ vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter) rq->rx_ring[i].base = pci_alloc_consistent(adapter->pdev, sz, &rq->rx_ring[i].basePA); if (!rq->rx_ring[i].base) { - printk(KERN_ERR "%s: failed to allocate rx ring %d\n", - adapter->netdev->name, i); + netdev_err(adapter->netdev, + "failed to allocate rx ring %d\n", i); goto err; } } @@ -1521,8 +1517,7 @@ vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter) rq->comp_ring.base = pci_alloc_consistent(adapter->pdev, sz, &rq->comp_ring.basePA); if (!rq->comp_ring.base) { - printk(KERN_ERR "%s: failed to allocate rx comp ring\n", - adapter->netdev->name); + netdev_err(adapter->netdev, "failed to allocate rx comp ring\n"); goto err; } @@ -1814,9 +1809,10 @@ vmxnet3_request_irqs(struct vmxnet3_adapter *adapter) adapter->rx_queue[i].name, &(adapter->rx_queue[i])); if (err) { - printk(KERN_ERR "Failed to request irq for MSIX" - ", %s, error %d\n", - adapter->rx_queue[i].name, err); + netdev_err(adapter->netdev, + "Failed to request irq for MSIX, " + "%s, error %d\n", + adapter->rx_queue[i].name, err); return err; } @@ -1845,8 +1841,9 @@ vmxnet3_request_irqs(struct vmxnet3_adapter *adapter) #endif intr->num_intrs = vector + 1; if (err) { - printk(KERN_ERR "Failed to request irq %s (intr type:%d), error" - ":%d\n", adapter->netdev->name, intr->type, err); + netdev_err(adapter->netdev, + "Failed to request irq (intr type:%d), error %d\n", + intr->type, err); } else { /* Number of rx queues will not change after this */ for (i = 0; i < adapter->num_rx_queues; i++) { @@ -1867,9 +1864,9 @@ vmxnet3_request_irqs(struct vmxnet3_adapter *adapter) adapter->rx_queue[0].comp_ring.intr_idx = 0; } - printk(KERN_INFO "%s: intr type %u, mode %u, %u vectors " - "allocated\n", adapter->netdev->name, intr->type, - intr->mask_mode, intr->num_intrs); + netdev_info(adapter->netdev, + "intr type %u, mode %u, %u vectors allocated\n", + intr->type, intr->mask_mode, intr->num_intrs); } return err; @@ -2035,8 +2032,8 @@ vmxnet3_set_mc(struct net_device *netdev) rxConf->mfTablePA = cpu_to_le64(virt_to_phys( new_table)); } else { - printk(KERN_INFO "%s: failed to copy mcast list" - ", setting ALL_MULTI\n", netdev->name); + netdev_info(netdev, "failed to copy mcast list" + ", setting ALL_MULTI\n"); new_mode |= VMXNET3_RXM_ALL_MULTI; } } @@ -2221,15 +2218,15 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) vmxnet3_tq_init_all(adapter); err = vmxnet3_rq_init_all(adapter); if (err) { - printk(KERN_ERR "Failed to init rx queue for %s: error %d\n", - adapter->netdev->name, err); + netdev_err(adapter->netdev, + "Failed to init rx queue error %d\n", err); goto rq_err; } err = vmxnet3_request_irqs(adapter); if (err) { - printk(KERN_ERR "Failed to setup irq for %s: error %d\n", - adapter->netdev->name, err); + netdev_err(adapter->netdev, + "Failed to setup irq for error %d\n", err); goto irq_err; } @@ -2246,8 +2243,8 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) spin_unlock_irqrestore(&adapter->cmd_lock, flags); if (ret != 0) { - printk(KERN_ERR "Failed to activate dev %s: error %u\n", - adapter->netdev->name, ret); + netdev_err(adapter->netdev, + "Failed to activate dev: error %u\n", ret); err = -EINVAL; goto activate_err; } @@ -2362,23 +2359,22 @@ vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64) err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR "Failed to enable adapter %s: error %d\n", - pci_name(pdev), err); + dev_err(&pdev->dev, "Failed to enable adapter: error %d\n", err); return err; } if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) { if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) { - printk(KERN_ERR "pci_set_consistent_dma_mask failed " - "for adapter %s\n", pci_name(pdev)); + dev_err(&pdev->dev, + "pci_set_consistent_dma_mask failed\n"); err = -EIO; goto err_set_mask; } *dma64 = true; } else { if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) { - printk(KERN_ERR "pci_set_dma_mask failed for adapter " - "%s\n", pci_name(pdev)); + dev_err(&pdev->dev, + "pci_set_dma_mask failed\n"); err = -EIO; goto err_set_mask; } @@ -2388,8 +2384,8 @@ vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64) err = pci_request_selected_regions(pdev, (1 << 2) - 1, vmxnet3_driver_name); if (err) { - printk(KERN_ERR "Failed to request region for adapter %s: " - "error %d\n", pci_name(pdev), err); + dev_err(&pdev->dev, + "Failed to request region for adapter: error %d\n", err); goto err_set_mask; } @@ -2399,8 +2395,7 @@ vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64) mmio_len = pci_resource_len(pdev, 0); adapter->hw_addr0 = ioremap(mmio_start, mmio_len); if (!adapter->hw_addr0) { - printk(KERN_ERR "Failed to map bar0 for adapter %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Failed to map bar0\n"); err = -EIO; goto err_ioremap; } @@ -2409,8 +2404,7 @@ vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64) mmio_len = pci_resource_len(pdev, 1); adapter->hw_addr1 = ioremap(mmio_start, mmio_len); if (!adapter->hw_addr1) { - printk(KERN_ERR "Failed to map bar1 for adapter %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Failed to map bar1\n"); err = -EIO; goto err_bar1; } @@ -2517,12 +2511,14 @@ vmxnet3_create_queues(struct vmxnet3_adapter *adapter, u32 tx_ring_size, err = vmxnet3_rq_create(rq, adapter); if (err) { if (i == 0) { - printk(KERN_ERR "Could not allocate any rx" - "queues. Aborting.\n"); + netdev_err(adapter->netdev, + "Could not allocate any rx queues. " + "Aborting.\n"); goto queue_err; } else { - printk(KERN_INFO "Number of rx queues changed " - "to : %d.\n", i); + netdev_info(adapter->netdev, + "Number of rx queues changed " + "to : %d.\n", i); adapter->num_rx_queues = i; err = 0; break; @@ -2635,15 +2631,17 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu) vmxnet3_adjust_rx_ring_size(adapter); err = vmxnet3_rq_create_all(adapter); if (err) { - printk(KERN_ERR "%s: failed to re-create rx queues," - " error %d. Closing it.\n", netdev->name, err); + netdev_err(netdev, + "failed to re-create rx queues, " + " error %d. Closing it.\n", err); goto out; } err = vmxnet3_activate_dev(adapter); if (err) { - printk(KERN_ERR "%s: failed to re-activate, error %d. " - "Closing it\n", netdev->name, err); + netdev_err(netdev, + "failed to re-activate, error %d. " + "Closing it\n", err); goto out; } } @@ -2786,7 +2784,8 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE || adapter->num_rx_queues != 1) { adapter->share_intr = VMXNET3_INTR_TXSHARE; - printk(KERN_ERR "Number of rx queues : 1\n"); + netdev_err(adapter->netdev, + "Number of rx queues : 1\n"); adapter->num_rx_queues = 1; adapter->intr.num_intrs = VMXNET3_LINUX_MIN_MSIX_VECT; @@ -2816,7 +2815,8 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) #endif /* CONFIG_PCI_MSI */ adapter->num_rx_queues = 1; - printk(KERN_INFO "Using INTx interrupt, #Rx queues: 1.\n"); + dev_info(&adapter->netdev->dev, + "Using INTx interrupt, #Rx queues: 1.\n"); adapter->intr.type = VMXNET3_IT_INTX; /* INT-X related setting */ @@ -2842,7 +2842,7 @@ vmxnet3_tx_timeout(struct net_device *netdev) struct vmxnet3_adapter *adapter = netdev_priv(netdev); adapter->tx_timeout_count++; - printk(KERN_ERR "%s: tx hang\n", adapter->netdev->name); + netdev_err(adapter->netdev, "tx hang\n"); schedule_work(&adapter->work); netif_wake_queue(adapter->netdev); } @@ -2862,12 +2862,12 @@ vmxnet3_reset_work(struct work_struct *data) /* if the device is closed, we must leave it alone */ rtnl_lock(); if (netif_running(adapter->netdev)) { - printk(KERN_INFO "%s: resetting\n", adapter->netdev->name); + netdev_notice(adapter->netdev, "resetting\n"); vmxnet3_quiesce_dev(adapter); vmxnet3_reset_dev(adapter); vmxnet3_activate_dev(adapter); } else { - printk(KERN_INFO "%s: already closed\n", adapter->netdev->name); + netdev_info(adapter->netdev, "already closed\n"); } rtnl_unlock(); @@ -2926,8 +2926,9 @@ vmxnet3_probe_device(struct pci_dev *pdev, num_tx_queues = rounddown_pow_of_two(num_tx_queues); netdev = alloc_etherdev_mq(sizeof(struct vmxnet3_adapter), max(num_tx_queues, num_rx_queues)); - printk(KERN_INFO "# of Tx queues : %d, # of Rx queues : %d\n", - num_tx_queues, num_rx_queues); + dev_info(&pdev->dev, + "# of Tx queues : %d, # of Rx queues : %d\n", + num_tx_queues, num_rx_queues); if (!netdev) return -ENOMEM; @@ -2942,8 +2943,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, sizeof(struct Vmxnet3_DriverShared), &adapter->shared_pa); if (!adapter->shared) { - printk(KERN_ERR "Failed to allocate memory for %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Failed to allocate memory\n"); err = -ENOMEM; goto err_alloc_shared; } @@ -2957,8 +2957,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, &adapter->queue_desc_pa); if (!adapter->tqd_start) { - printk(KERN_ERR "Failed to allocate memory for %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Failed to allocate memory\n"); err = -ENOMEM; goto err_alloc_queue_desc; } @@ -2988,8 +2987,8 @@ vmxnet3_probe_device(struct pci_dev *pdev, if (ver & 1) { VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_VRRS, 1); } else { - printk(KERN_ERR "Incompatible h/w version (0x%x) for adapter" - " %s\n", ver, pci_name(pdev)); + dev_err(&pdev->dev, + "Incompatible h/w version (0x%x) for adapter\n", ver); err = -EBUSY; goto err_ver; } @@ -2998,8 +2997,8 @@ vmxnet3_probe_device(struct pci_dev *pdev, if (ver & 1) { VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_UVRS, 1); } else { - printk(KERN_ERR "Incompatible upt version (0x%x) for " - "adapter %s\n", ver, pci_name(pdev)); + dev_err(&pdev->dev, + "Incompatible upt version (0x%x) for adapter\n", ver); err = -EBUSY; goto err_ver; } @@ -3020,7 +3019,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, if (adapter->num_rx_queues > 1 && adapter->intr.type == VMXNET3_IT_MSIX) { adapter->rss = true; - printk(KERN_INFO "RSS is enabled.\n"); + dev_dbg(&pdev->dev, "RSS is enabled.\n"); } else { adapter->rss = false; } @@ -3054,8 +3053,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, err = register_netdev(netdev); if (err) { - printk(KERN_ERR "Failed to register adapter %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Failed to register adapter\n"); goto err_register; } @@ -3302,7 +3300,7 @@ static struct pci_driver vmxnet3_driver = { static int __init vmxnet3_init_module(void) { - printk(KERN_INFO "%s - version %s\n", VMXNET3_DRIVER_DESC, + pr_info("%s - version %s\n", VMXNET3_DRIVER_DESC, VMXNET3_DRIVER_VERSION_REPORT); return pci_register_driver(&vmxnet3_driver); } diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c index 8c9fa4b..9bc542b 100644 --- a/drivers/net/vmxnet3/vmxnet3_ethtool.c +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -522,24 +522,23 @@ vmxnet3_set_ringparam(struct net_device *netdev, if (err) { /* failed, most likely because of OOM, try default * size */ - printk(KERN_ERR "%s: failed to apply new sizes, try the" - " default ones\n", netdev->name); + netdev_err(netdev, "failed to apply new sizes, " + "try the default ones\n"); err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE, VMXNET3_DEF_RX_RING_SIZE, VMXNET3_DEF_RX_RING_SIZE); if (err) { - printk(KERN_ERR "%s: failed to create queues " - "with default sizes. Closing it\n", - netdev->name); + netdev_err(netdev, "failed to create queues " + "with default sizes. Closing it\n"); goto out; } } err = vmxnet3_activate_dev(adapter); if (err) - printk(KERN_ERR "%s: failed to re-activate, error %d." - " Closing it\n", netdev->name, err); + netdev_err(netdev, "failed to re-activate, error %d." + " Closing it\n", err); } out: -- cgit v0.10.2 From 4816a07266f1a4fcf5939c2f9088585819682d82 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:31 +0000 Subject: vmxnet3: remove VMXNET3_MAX_DEVICES Defined but never used. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index d862937..0e55153 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -45,7 +45,6 @@ MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table); static atomic_t devices_found; -#define VMXNET3_MAX_DEVICES 10 static int enable_mq = 1; static int irq_share_mode; -- cgit v0.10.2 From f32a2605bbf9a42884b11e222d208ae0372f6d89 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:32 +0000 Subject: vmxnet3: remove device counter An atomic counter of devices present is maintained but never used. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 0e55153..1f66a7e 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -43,8 +43,6 @@ static DEFINE_PCI_DEVICE_TABLE(vmxnet3_pciid_table) = { MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table); -static atomic_t devices_found; - static int enable_mq = 1; static int irq_share_mode; @@ -3005,8 +3003,6 @@ vmxnet3_probe_device(struct pci_dev *pdev, SET_NETDEV_DEV(netdev, &pdev->dev); vmxnet3_declare_features(adapter, dma64); - adapter->dev_number = atomic_read(&devices_found); - adapter->share_intr = irq_share_mode; if (adapter->share_intr == VMXNET3_INTR_BUDDYSHARE && adapter->num_tx_queues != adapter->num_rx_queues) @@ -3057,7 +3053,6 @@ vmxnet3_probe_device(struct pci_dev *pdev, } vmxnet3_check_link(adapter, false); - atomic_inc(&devices_found); return 0; err_register: diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 55465ed..3198384 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -352,7 +352,6 @@ struct vmxnet3_adapter { unsigned long state; /* VMXNET3_STATE_BIT_xxx */ - int dev_number; int share_intr; }; -- cgit v0.10.2 From 4db37a78561c4f6ff54176257b3098f3d4357759 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:33 +0000 Subject: vmxnet3: remove unused irq_share_mode This static variable is never set, it initializes to 0 which is VMXNET3_INTR_BUDDYSHARE, and never changes. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 1f66a7e..45c39cc 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -44,7 +44,6 @@ static DEFINE_PCI_DEVICE_TABLE(vmxnet3_pciid_table) = { MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table); static int enable_mq = 1; -static int irq_share_mode; static void vmxnet3_write_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac); @@ -3003,9 +3002,9 @@ vmxnet3_probe_device(struct pci_dev *pdev, SET_NETDEV_DEV(netdev, &pdev->dev); vmxnet3_declare_features(adapter, dma64); - adapter->share_intr = irq_share_mode; - if (adapter->share_intr == VMXNET3_INTR_BUDDYSHARE && - adapter->num_tx_queues != adapter->num_rx_queues) + if (adapter->num_tx_queues == adapter->num_rx_queues) + adapter->share_intr = VMXNET3_INTR_BUDDYSHARE; + else adapter->share_intr = VMXNET3_INTR_DONTSHARE; vmxnet3_alloc_intr_resources(adapter); -- cgit v0.10.2 From 66d3591036097a30d22d8c622e332797bc5070d7 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:34 +0000 Subject: vmxnet3: use static RSS key Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device for more predictable testing. This is already done on most hardware drivers. Initial key value just some arbitrary bits extracted once from /dev/random. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 45c39cc..9777dc6 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2157,6 +2157,14 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) if (adapter->rss) { struct UPT1_RSSConf *rssConf = adapter->rss_conf; + static const uint8_t rss_key[UPT1_RSS_MAX_KEY_SIZE] = { + 0x3b, 0x56, 0xd1, 0x56, 0x13, 0x4a, 0xe7, 0xac, + 0xe8, 0x79, 0x09, 0x75, 0xe8, 0x65, 0x79, 0x28, + 0x35, 0x12, 0xb9, 0x56, 0x7c, 0x76, 0x4b, 0x70, + 0xd8, 0x56, 0xa3, 0x18, 0x9b, 0x0a, 0xee, 0xf3, + 0x96, 0xa6, 0x9f, 0x8f, 0x9e, 0x8c, 0x90, 0xc9, + }; + devRead->misc.uptFeatures |= UPT1_F_RSS; devRead->misc.numRxQueues = adapter->num_rx_queues; rssConf->hashType = UPT1_RSS_HASH_TYPE_TCP_IPV4 | @@ -2166,7 +2174,8 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) rssConf->hashFunc = UPT1_RSS_HASH_FUNC_TOEPLITZ; rssConf->hashKeySize = UPT1_RSS_MAX_KEY_SIZE; rssConf->indTableSize = VMXNET3_RSS_IND_TABLE_SIZE; - get_random_bytes(&rssConf->hashKey[0], rssConf->hashKeySize); + memcpy(rssConf->hashKey, rss_key, sizeof(rss_key)); + for (i = 0; i < rssConf->indTableSize; i++) rssConf->indTable[i] = ethtool_rxfh_indir_default( i, adapter->num_rx_queues); -- cgit v0.10.2 From 7db11f7596e0e54f982b1897f8233056e5c67a7d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Jan 2013 07:28:35 +0000 Subject: vmxnet3: better RSS support The VMXNET3 device provides RSS hash value for received packets, but it is not being used. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 9777dc6..b1c90f8 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1226,6 +1226,11 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len, PCI_DMA_FROMDEVICE); +#ifdef VMXNET3_RSS + if (rcd->rssType != VMXNET3_RCD_RSS_TYPE_NONE && + (adapter->netdev->features & NETIF_F_RXHASH)) + ctx->skb->rxhash = le32_to_cpu(rcd->rssHash); +#endif skb_put(ctx->skb, rcd->len); /* Immediate refill */ @@ -3022,6 +3027,8 @@ vmxnet3_probe_device(struct pci_dev *pdev, if (adapter->num_rx_queues > 1 && adapter->intr.type == VMXNET3_IT_MSIX) { adapter->rss = true; + netdev->hw_features |= NETIF_F_RXHASH; + netdev->features |= NETIF_F_RXHASH; dev_dbg(&pdev->dev, "RSS is enabled.\n"); } else { adapter->rss = false; -- cgit v0.10.2 From f92d318023ff70a273690a91568597168ac32f05 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 14 Jan 2013 23:34:06 +0000 Subject: netpoll: fix a rtnl lock assertion failure v4: hold rtnl lock for the whole netpoll_setup() v3: remove the comment v2: use RCU read lock This patch fixes the following warning: [ 72.013864] RTNL: assertion failed at net/core/dev.c (4955) [ 72.017758] Pid: 668, comm: netpoll-prep-v6 Not tainted 3.8.0-rc1+ #474 [ 72.019582] Call Trace: [ 72.020295] [] netdev_master_upper_dev_get+0x35/0x58 [ 72.022545] [] netpoll_setup+0x61/0x340 [ 72.024846] [] store_enabled+0x82/0xc3 [ 72.027466] [] netconsole_target_attr_store+0x35/0x37 [ 72.029348] [] configfs_write_file+0xe2/0x10c [ 72.030959] [] vfs_write+0xaf/0xf6 [ 72.032359] [] ? sysret_check+0x22/0x5d [ 72.033824] [] sys_write+0x5c/0x84 [ 72.035328] [] system_call_fastpath+0x16/0x1b In case of other races, hold rtnl lock for the entire netpoll_setup() function. Cc: Eric Dumazet Cc: Jiri Pirko Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 9f05067..a5ad1c1 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -1048,11 +1048,13 @@ int netpoll_setup(struct netpoll *np) struct in_device *in_dev; int err; + rtnl_lock(); if (np->dev_name) - ndev = dev_get_by_name(&init_net, np->dev_name); + ndev = __dev_get_by_name(&init_net, np->dev_name); if (!ndev) { np_err(np, "%s doesn't exist, aborting\n", np->dev_name); - return -ENODEV; + err = -ENODEV; + goto unlock; } if (netdev_master_upper_dev_get(ndev)) { @@ -1066,15 +1068,14 @@ int netpoll_setup(struct netpoll *np) np_info(np, "device %s not up yet, forcing it\n", np->dev_name); - rtnl_lock(); err = dev_open(ndev); - rtnl_unlock(); if (err) { np_err(np, "failed to open %s\n", ndev->name); goto put; } + rtnl_unlock(); atleast = jiffies + HZ/10; atmost = jiffies + carrier_timeout * HZ; while (!netif_carrier_ok(ndev)) { @@ -1094,16 +1095,14 @@ int netpoll_setup(struct netpoll *np) np_notice(np, "carrier detect appears untrustworthy, waiting 4 seconds\n"); msleep(4000); } + rtnl_lock(); } if (!np->local_ip.ip) { if (!np->ipv6) { - rcu_read_lock(); - in_dev = __in_dev_get_rcu(ndev); - + in_dev = __in_dev_get_rtnl(ndev); if (!in_dev || !in_dev->ifa_list) { - rcu_read_unlock(); np_err(np, "no IP address for %s, aborting\n", np->dev_name); err = -EDESTADDRREQ; @@ -1111,14 +1110,12 @@ int netpoll_setup(struct netpoll *np) } np->local_ip.ip = in_dev->ifa_list->ifa_local; - rcu_read_unlock(); np_info(np, "local IP %pI4\n", &np->local_ip.ip); } else { #if IS_ENABLED(CONFIG_IPV6) struct inet6_dev *idev; err = -EDESTADDRREQ; - rcu_read_lock(); idev = __in6_dev_get(ndev); if (idev) { struct inet6_ifaddr *ifp; @@ -1133,7 +1130,6 @@ int netpoll_setup(struct netpoll *np) } read_unlock_bh(&idev->lock); } - rcu_read_unlock(); if (err) { np_err(np, "no IPv6 address for %s, aborting\n", np->dev_name); @@ -1151,17 +1147,17 @@ int netpoll_setup(struct netpoll *np) /* fill up the skb queue */ refill_skbs(); - rtnl_lock(); err = __netpoll_setup(np, ndev, GFP_KERNEL); - rtnl_unlock(); - if (err) goto put; + rtnl_unlock(); return 0; put: dev_put(ndev); +unlock: + rtnl_unlock(); return err; } EXPORT_SYMBOL(netpoll_setup); -- cgit v0.10.2 From ea54fba20985b7a0cb8e1c8e2760a0865ee47763 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:48 +0100 Subject: nl80211: add range checks to mesh parameters Ranges are taken from IEEE 802.11-2012, common sense or current implementation requirements. Signed-off-by: Marco Porsch Acked-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 9bd8340..ceb27fd 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3981,13 +3981,15 @@ static int nl80211_parse_mesh_config(struct genl_info *info, struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1]; u32 mask = 0; -#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \ -do {\ - if (table[attr_num]) {\ - cfg->param = nla_fn(table[attr_num]); \ - mask |= (1 << (attr_num - 1)); \ - } \ -} while (0);\ +#define FILL_IN_MESH_PARAM_IF_SET(tb, cfg, param, min, max, mask, attr, fn) \ +do { \ + if (tb[attr]) { \ + if (fn(tb[attr]) < min || fn(tb[attr]) > max) \ + return -EINVAL; \ + cfg->param = fn(tb[attr]); \ + mask |= (1 << (attr - 1)); \ + } \ +} while (0) if (!info->attrs[NL80211_ATTR_MESH_CONFIG]) @@ -4002,81 +4004,88 @@ do {\ BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32); /* Fill in the params struct */ - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout, 1, 255, mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout, 1, 255, mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout, 1, 255, mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks, 0, 255, mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries, 0, 16, mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL, 1, 255, mask, NL80211_MESHCONF_TTL, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl, 1, 255, mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks, 0, 1, mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, mask, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, + 1, 255, mask, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries, 0, 255, mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time, 1, 65535, mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout, 1, 65535, mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, mask, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, + 1, 65535, mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, nla_get_u32); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval, - mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + 1, 65535, mask, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPperrMinInterval, - mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + 1, 65535, mask, + NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPnetDiameterTraversalTime, mask, + dot11MeshHWMPnetDiameterTraversalTime, + 1, 65535, mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, mask, - NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, mask, - NL80211_MESHCONF_HWMP_RANN_INTERVAL, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, 0, 4, + mask, NL80211_MESHCONF_HWMP_ROOTMODE, + nla_get_u8); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, 1, 65535, + mask, NL80211_MESHCONF_HWMP_RANN_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshGateAnnouncementProtocol, mask, - NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + dot11MeshGateAnnouncementProtocol, 0, 1, + mask, NL80211_MESHCONF_GATE_ANNOUNCEMENTS, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding, 0, 1, mask, NL80211_MESHCONF_FORWARDING, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, 1, 255, mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, 0, 16, mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout, - mask, + 1, 65535, mask, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, 1, 65535, mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPconfirmationInterval, mask, + dot11MeshHWMPconfirmationInterval, + 1, 65535, mask, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, nla_get_u16); if (mask_out) -- cgit v0.10.2 From 1617bab8db81427392d424f2c7ffb5a3282c417c Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:49 +0100 Subject: mac80211: update mesh peer link counter during userspace peering The established peer link count is indicated in mesh beacons and used for other internal tasks. Previously it was not updated when authenticated peering is performed in userspace. Signed-off-by: Marco Porsch Acked-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 817992b..8a91dd2 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1243,18 +1243,33 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH - if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) + if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { + u32 changed = 0; + switch (params->plink_state) { - case NL80211_PLINK_LISTEN: case NL80211_PLINK_ESTAB: + if (sta->plink_state != NL80211_PLINK_ESTAB) + changed = mesh_plink_inc_estab_count( + sdata); + sta->plink_state = params->plink_state; + break; + case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: + case NL80211_PLINK_OPN_SNT: + case NL80211_PLINK_OPN_RCVD: + case NL80211_PLINK_CNF_RCVD: + case NL80211_PLINK_HOLDING: + if (sta->plink_state == NL80211_PLINK_ESTAB) + changed = mesh_plink_dec_estab_count( + sdata); sta->plink_state = params->plink_state; break; default: /* nothing */ break; } - else + ieee80211_bss_info_change_notify(sdata, changed); + } else { switch (params->plink_action) { case PLINK_ACTION_OPEN: mesh_plink_open(sta); @@ -1263,6 +1278,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, mesh_plink_block(sta); break; } + } #endif } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 84c28c6..c07f6fc 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -307,6 +307,20 @@ extern int mesh_paths_generation; #ifdef CONFIG_MAC80211_MESH extern int mesh_allocated; +static inline +u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) +{ + atomic_inc(&sdata->u.mesh.estab_plinks); + return mesh_accept_plinks_update(sdata); +} + +static inline +u32 mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) +{ + atomic_dec(&sdata->u.mesh.estab_plinks); + return mesh_accept_plinks_update(sdata); +} + static inline int mesh_plink_free_count(struct ieee80211_sub_if_data *sdata) { return sdata->u.mesh.mshcfg.dot11MeshMaxPeerLinks - diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 4b274e9..9e04166 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -41,20 +41,6 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, enum ieee80211_self_protected_actioncode action, u8 *da, __le16 llid, __le16 plid, __le16 reason); -static inline -u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) -{ - atomic_inc(&sdata->u.mesh.estab_plinks); - return mesh_accept_plinks_update(sdata); -} - -static inline -u32 mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) -{ - atomic_dec(&sdata->u.mesh.estab_plinks); - return mesh_accept_plinks_update(sdata); -} - /** * mesh_plink_fsm_restart - restart a mesh peer link finite state machine * -- cgit v0.10.2 From eac70c135def117849faa7cc8b7ccb941498085f Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:50 +0100 Subject: mac80211: move add_tim to subfunction This functions will be used for mesh beacons, too. Signed-off-by: Marco Porsch [some formatting fixes] Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e9eadc4..0d73816 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2261,9 +2261,8 @@ void ieee80211_tx_pending(unsigned long data) /* functions for drivers to get certain frames */ -static void ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, - struct ps_data *ps, - struct sk_buff *skb) +static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, + struct ps_data *ps, struct sk_buff *skb) { u8 *pos, *tim; int aid0 = 0; @@ -2325,6 +2324,31 @@ static void ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, } } +static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, + struct ps_data *ps, struct sk_buff *skb) +{ + struct ieee80211_local *local = sdata->local; + + /* + * Not very nice, but we want to allow the driver to call + * ieee80211_beacon_get() as a response to the set_tim() + * callback. That, however, is already invoked under the + * sta_lock to guarantee consistent and race-free update + * of the tim bitmap in mac80211 and the driver. + */ + if (local->tim_in_locked_section) { + __ieee80211_beacon_add_tim(sdata, ps, skb); + } else { + unsigned long flags; + + spin_lock_irqsave(&local->tim_lock, flags); + __ieee80211_beacon_add_tim(sdata, ps, skb); + spin_unlock_irqrestore(&local->tim_lock, flags); + } + + return 0; +} + struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 *tim_offset, u16 *tim_length) @@ -2369,22 +2393,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, memcpy(skb_put(skb, beacon->head_len), beacon->head, beacon->head_len); - /* - * Not very nice, but we want to allow the driver to call - * ieee80211_beacon_get() as a response to the set_tim() - * callback. That, however, is already invoked under the - * sta_lock to guarantee consistent and race-free update - * of the tim bitmap in mac80211 and the driver. - */ - if (local->tim_in_locked_section) { - ieee80211_beacon_add_tim(sdata, &ap->ps, skb); - } else { - unsigned long flags; - - spin_lock_irqsave(&local->tim_lock, flags); - ieee80211_beacon_add_tim(sdata, &ap->ps, skb); - spin_unlock_irqrestore(&local->tim_lock, flags); - } + ieee80211_beacon_add_tim(sdata, &ap->ps, skb); if (tim_offset) *tim_offset = beacon->head_len; -- cgit v0.10.2 From 9bdbf04db099c11bbbaea9dcea7465c508531fb8 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:51 +0100 Subject: {cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3d8717a..516aded 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1036,6 +1036,8 @@ struct mesh_config { * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication * @is_secure: this mesh uses security + * @dtim_period: DTIM period to use + * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * * These parameters are fixed when the mesh is created. @@ -1051,6 +1053,8 @@ struct mesh_setup { u8 ie_len; bool is_authenticated; bool is_secure; + u8 dtim_period; + u16 beacon_interval; int mcast_rate[IEEE80211_NUM_BANDS]; }; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8a91dd2..36aa65f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1666,6 +1666,9 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate, sizeof(setup->mcast_rate)); + sdata->vif.bss_conf.beacon_int = setup->beacon_interval; + sdata->vif.bss_conf.dtim_period = setup->dtim_period; + return 0; } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 2458858..694e273 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -625,7 +625,6 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) ieee80211_queue_work(&local->hw, &sdata->work); sdata->vif.bss_conf.ht_operation_mode = ifmsh->mshcfg.ht_opmode; - sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index c07f6fc..aff3015 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -191,8 +191,6 @@ struct mesh_rmc { #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ) #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ) -#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units */ - #define MESH_PATH_EXPIRE (600 * HZ) /* Default maximum number of plinks per interface */ diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index f9d6ce5..0fe8ceb 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -44,6 +44,9 @@ #define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50 +#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */ +#define MESH_DEFAULT_DTIM_PERIOD 2 + const struct mesh_config default_mesh_config = { .dot11MeshRetryTimeout = MESH_RET_T, .dot11MeshConfirmTimeout = MESH_CONF_T, @@ -79,6 +82,8 @@ const struct mesh_setup default_mesh_setup = { .ie = NULL, .ie_len = 0, .is_secure = false, + .beacon_interval = MESH_DEFAULT_BEACON_INTERVAL, + .dtim_period = MESH_DEFAULT_DTIM_PERIOD, }; int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ceb27fd..d5842eb 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6669,6 +6669,21 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE]))) return -EINVAL; + if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) { + setup.beacon_interval = + nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]); + if (setup.beacon_interval < 10 || + setup.beacon_interval > 10000) + return -EINVAL; + } + + if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) { + setup.dtim_period = + nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]); + if (setup.dtim_period < 1 || setup.dtim_period > 100) + return -EINVAL; + } + if (info->attrs[NL80211_ATTR_MESH_SETUP]) { /* parse additional setup parameters if given */ err = nl80211_parse_mesh_setup(info, &setup); -- cgit v0.10.2 From 3b1c5a5307fb5277f395efdcf330c064d79df07d Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:52 +0100 Subject: {cfg,nl}80211: mesh power mode primitives and userspace access Add the nl80211_mesh_power_mode enumeration which holds possible values for the mesh power mode. These modes are unknown, active, light sleep and deep sleep. Add power_mode entry to the mesh config structure to hold the user-configured default mesh power mode. This value will be used for new peer links. Add the dot11MeshAwakeWindowDuration value to the mesh config. The awake window is a duration in TU describing how long the STA will stay awake after transmitting its beacon in PS mode. Add access routines to: - get/set local link-specific power mode (STA) - get remote STA's link-specific power mode (STA) - get remote STA's non-peer power mode (STA) - get/set default mesh power mode (mesh config) - get/set mesh awake window duration (mesh config) All config changes may be done at mesh runtime and take effect immediately. Signed-off-by: Marco Porsch Signed-off-by: Ivan Bezyazychnyy Signed-off-by: Mike Krinkin [fix commit message line length, error handling in set station] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 516aded..d9f08f6 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -610,6 +610,8 @@ enum station_parameters_apply_mask { * @sta_modify_mask: bitmap indicating which parameters changed * (for those that don't have a natural "no change" value), * see &enum station_parameters_apply_mask + * @local_pm: local link-specific mesh power save mode (no change when set + * to unknown) */ struct station_parameters { u8 *supported_rates; @@ -625,6 +627,7 @@ struct station_parameters { struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; + enum nl80211_mesh_power_mode local_pm; }; /** @@ -655,6 +658,9 @@ struct station_parameters { * @STATION_INFO_STA_FLAGS: @sta_flags filled * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled * @STATION_INFO_T_OFFSET: @t_offset filled + * @STATION_INFO_LOCAL_PM: @local_pm filled + * @STATION_INFO_PEER_PM: @peer_pm filled + * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -678,6 +684,9 @@ enum station_info_flags { STATION_INFO_STA_FLAGS = 1<<18, STATION_INFO_BEACON_LOSS_COUNT = 1<<19, STATION_INFO_T_OFFSET = 1<<20, + STATION_INFO_LOCAL_PM = 1<<21, + STATION_INFO_PEER_PM = 1<<22, + STATION_INFO_NONPEER_PM = 1<<23, }; /** @@ -791,6 +800,9 @@ struct sta_bss_parameters { * @sta_flags: station flags mask & values * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @local_pm: local mesh STA power save mode + * @peer_pm: peer mesh STA power save mode + * @nonpeer_pm: non-peer mesh STA power save mode */ struct station_info { u32 filled; @@ -820,6 +832,9 @@ struct station_info { u32 beacon_loss_count; s64 t_offset; + enum nl80211_mesh_power_mode local_pm; + enum nl80211_mesh_power_mode peer_pm; + enum nl80211_mesh_power_mode nonpeer_pm; /* * Note: Add a new enum station_info_flags value for each new field and @@ -995,6 +1010,10 @@ struct bss_parameters { * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) * during which a mesh STA can send only one Action frame containing * a PREQ element for root path confirmation. + * @power_mode: The default mesh power save mode which will be the initial + * setting for new peer links. + * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake + * after transmitting its beacon. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1022,6 +1041,8 @@ struct mesh_config { u32 dot11MeshHWMPactivePathToRootTimeout; u16 dot11MeshHWMProotInterval; u16 dot11MeshHWMPconfirmationInterval; + enum nl80211_mesh_power_mode power_mode; + u16 dot11MeshAwakeWindowDuration; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5470171..6c4f703 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1310,6 +1310,9 @@ enum nl80211_commands { * if not given in START_AP 0 is assumed, if not given in SET_BSS * no change is made. * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1580,6 +1583,8 @@ enum nl80211_attrs { NL80211_ATTR_P2P_CTWINDOW, NL80211_ATTR_P2P_OPPPS, + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1838,6 +1843,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1862,6 +1871,9 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2253,6 +2265,34 @@ enum nl80211_mntr_flags { }; /** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** * enum nl80211_meshconf_params - mesh configuration parameters * * Mesh configuration parameters. These can be changed while the mesh is @@ -2346,6 +2386,11 @@ enum nl80211_mntr_flags { * (in TUs) during which a mesh STA can send only one Action frame * containing a PREQ element for root path confirmation. * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2375,6 +2420,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 0fe8ceb..55957a2 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -46,6 +46,7 @@ #define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */ #define MESH_DEFAULT_DTIM_PERIOD 2 +#define MESH_DEFAULT_AWAKE_WINDOW 10 /* in 1024 us units (=TUs) */ const struct mesh_config default_mesh_config = { .dot11MeshRetryTimeout = MESH_RET_T, @@ -72,6 +73,8 @@ const struct mesh_config default_mesh_config = { .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, + .power_mode = NL80211_MESH_POWER_ACTIVE, + .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW, }; const struct mesh_setup default_mesh_setup = { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d5842eb..1a7a710 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3001,6 +3001,18 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, nla_put_u32(msg, NL80211_STA_INFO_BEACON_LOSS, sinfo->beacon_loss_count)) goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_LOCAL_PM) && + nla_put_u32(msg, NL80211_STA_INFO_LOCAL_PM, + sinfo->local_pm)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_PEER_PM) && + nla_put_u32(msg, NL80211_STA_INFO_PEER_PM, + sinfo->peer_pm)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_NONPEER_PM) && + nla_put_u32(msg, NL80211_STA_INFO_NONPEER_PM, + sinfo->nonpeer_pm)) + goto nla_put_failure; if (sinfo->filled & STATION_INFO_BSS_PARAM) { bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM); if (!bss_param) @@ -3206,6 +3218,17 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.plink_state = nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]); + if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) { + enum nl80211_mesh_power_mode pm = nla_get_u32( + info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]); + + if (pm <= NL80211_MESH_POWER_UNKNOWN || + pm > NL80211_MESH_POWER_MAX) + return -EINVAL; + + params.local_pm = pm; + } + switch (dev->ieee80211_ptr->iftype) { case NL80211_IFTYPE_AP: case NL80211_IFTYPE_AP_VLAN: @@ -3213,6 +3236,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow mesh-specific things */ if (params.plink_action) return -EINVAL; + if (params.local_pm) + return -EINVAL; /* TDLS can't be set, ... */ if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) @@ -3265,6 +3290,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; + if (params.local_pm) + return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3922,7 +3949,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb, nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, cur_params.dot11MeshHWMProotInterval) || nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, - cur_params.dot11MeshHWMPconfirmationInterval)) + cur_params.dot11MeshHWMPconfirmationInterval) || + nla_put_u32(msg, NL80211_MESHCONF_POWER_MODE, + cur_params.power_mode) || + nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW, + cur_params.dot11MeshAwakeWindowDuration)) goto nla_put_failure; nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); @@ -3961,6 +3992,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 }, [NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 }, [NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 }, + [NL80211_MESHCONF_POWER_MODE] = { .type = NLA_U32 }, + [NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 }, }; static const struct nla_policy @@ -4088,6 +4121,14 @@ do { \ 1, 65535, mask, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, power_mode, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_MAX, + mask, NL80211_MESHCONF_POWER_MODE, + nla_get_u32); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshAwakeWindowDuration, + 0, 65535, mask, + NL80211_MESHCONF_AWAKE_WINDOW, nla_get_u16); if (mask_out) *mask_out = mask; -- cgit v0.10.2 From 1c18f1452a772dfe884ed25677bddb3ecaf9c43a Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 8 Jan 2013 10:17:27 +0100 Subject: nl80211: allow user-space to set address for P2P_DEVICE As per email discussion Jouni Malinen pointed out that: "P2P message exchanges can be executed on the current operating channel of any operation (both P2P and non-P2P station). These can be on 5 GHz and even on 60 GHz (so yes, you _can_ do GO Negotiation on 60 GHz). As an example, it would be possible to receive a GO Negotiation Request frame on a 5 GHz only radio and then to complete GO Negotiation on that band. This can happen both when connected to a P2P group (through client discoverability mechanism) and when connected to a legacy AP (assuming the station receive Probe Request frame from full scan in the beginning of P2P device discovery)." This means that P2P messages can be sent over different radio devices. However, these should use the same P2P device address so it should be able to provision this from user-space. This patch adds a parameter for this to struct vif_params which should only be used during creation of the P2P device interface. Cc: Jouni Malinen Cc: Greg Goldman Cc: Jithu Jance Signed-off-by: Arend van Spriel [add error checking] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d9f08f6..d81e730 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -281,9 +281,13 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames + * @macaddr: address to use for this virtual interface. This will only + * be used for non-netdevice interfaces. If this parameter is set + * to zero address the driver may determine the address as needed. */ struct vif_params { int use_4addr; + u8 macaddr[ETH_ALEN]; }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1a7a710..d543cf1 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2079,6 +2079,13 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) !(rdev->wiphy.interface_modes & (1 << type))) return -EOPNOTSUPP; + if (type == NL80211_IFTYPE_P2P_DEVICE && info->attrs[NL80211_ATTR_MAC]) { + nla_memcpy(params.macaddr, info->attrs[NL80211_ATTR_MAC], + ETH_ALEN); + if (!is_valid_ether_addr(params.macaddr)) + return -EADDRNOTAVAIL; + } + if (info->attrs[NL80211_ATTR_4ADDR]) { params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]); err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type); -- cgit v0.10.2 From cee00a959c0a86571e6f99cf42f0261d7e54d2ae Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 15 Jan 2013 17:15:57 +0200 Subject: cfg80211: Allow use_mfp to be specified with the connect command The NL80211_ATTR_USE_MFP attribute was originally added for NL80211_CMD_ASSOCIATE, but it is actually as useful (if not even more useful) with NL80211_CMD_CONNECT, so process that attribute with the connect command, too. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d81e730..f1686d4 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1465,6 +1465,7 @@ struct cfg80211_ibss_params { * @ie: IEs for association request * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used + * @mfp: indicate whether management frame protection is used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication @@ -1485,6 +1486,7 @@ struct cfg80211_connect_params { u8 *ie; size_t ie_len; bool privacy; + enum nl80211_mfp mfp; struct cfg80211_crypto_settings crypto; const u8 *key; u8 key_len, key_idx; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6c4f703..d01c162 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -374,8 +374,8 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * Background scan period can optionally be @@ -958,7 +958,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d543cf1..df82a5c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5932,6 +5932,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]); } + if (info->attrs[NL80211_ATTR_USE_MFP]) { + connect.mfp = nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]); + if (connect.mfp != NL80211_MFP_REQUIRED && + connect.mfp != NL80211_MFP_NO) + return -EINVAL; + } else { + connect.mfp = NL80211_MFP_NO; + } + if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { connect.channel = ieee80211_get_channel(wiphy, diff --git a/net/wireless/sme.c b/net/wireless/sme.c index d2d2651..a825dfe 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -192,7 +192,8 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev) prev_bssid, params->ssid, params->ssid_len, params->ie, params->ie_len, - false, ¶ms->crypto, + params->mfp != NL80211_MFP_NO, + ¶ms->crypto, params->flags, ¶ms->ht_capa, ¶ms->ht_capa_mask); if (err) -- cgit v0.10.2 From 11c4a075db2f8774d37544342c8cb9752b4db9e1 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 8 Jan 2013 14:04:07 +0100 Subject: cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f1686d4..970da44 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2125,6 +2125,7 @@ struct ieee80211_iface_limit { * @beacon_int_infra_match: In this combination, the beacon intervals * between infrastructure and AP types must match. This is required * only in special cases. + * @radar_detect_widths: bitmap of channel widths supported for radar detection * * These examples can be expressed as follows: * @@ -2177,6 +2178,7 @@ struct ieee80211_iface_combination { u16 max_interfaces; u8 n_limits; bool beacon_int_infra_match; + u8 radar_detect_widths; }; struct mac_address { diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d01c162..e6eeb4b 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2984,6 +2984,8 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -3016,6 +3018,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, /* keep last */ NUM_NL80211_IFACE_COMB, diff --git a/net/wireless/core.c b/net/wireless/core.c index 747dd93..0e702cd 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -382,8 +382,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) c = &wiphy->iface_combinations[i]; - /* Combinations with just one interface aren't real */ - if (WARN_ON(c->max_interfaces < 2)) + /* + * Combinations with just one interface aren't real, + * however we make an exception for DFS. + */ + if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths)) return -EINVAL; /* Need at least one channel */ @@ -398,6 +401,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) CFG80211_MAX_NUM_DIFFERENT_CHANNELS)) return -EINVAL; + /* DFS only works on one channel. */ + if (WARN_ON(c->radar_detect_widths && + (c->num_different_channels > 1))) + return -EINVAL; + if (WARN_ON(!c->n_limits)) return -EINVAL; diff --git a/net/wireless/core.h b/net/wireless/core.h index f342267..8396f76 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -425,7 +425,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, enum nl80211_iftype iftype, struct ieee80211_channel *chan, - enum cfg80211_chan_mode chanmode); + enum cfg80211_chan_mode chanmode, + u8 radar_detect); static inline int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, @@ -433,7 +434,7 @@ cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype) { return cfg80211_can_use_iftype_chan(rdev, wdev, iftype, NULL, - CHAN_MODE_UNDEFINED); + CHAN_MODE_UNDEFINED, 0); } static inline int @@ -450,7 +451,7 @@ cfg80211_can_use_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode) { return cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, - chan, chanmode); + chan, chanmode, 0); } void diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index df82a5c..33de803 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -856,6 +856,9 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy, nla_put_u32(msg, NL80211_IFACE_COMB_MAXNUM, c->max_interfaces)) goto nla_put_failure; + if (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + c->radar_detect_widths)) + goto nla_put_failure; nla_nest_end(msg, nl_combi); } diff --git a/net/wireless/util.c b/net/wireless/util.c index 16d76a8..1c2795d 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1184,7 +1184,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, enum nl80211_iftype iftype, struct ieee80211_channel *chan, - enum cfg80211_chan_mode chanmode) + enum cfg80211_chan_mode chanmode, + u8 radar_detect) { struct wireless_dev *wdev_iter; u32 used_iftypes = BIT(iftype); @@ -1195,14 +1196,45 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chmode; int num_different_channels = 0; int total = 1; + bool radar_required; int i, j; ASSERT_RTNL(); lockdep_assert_held(&rdev->devlist_mtx); + if (WARN_ON(hweight32(radar_detect) > 1)) + return -EINVAL; + + switch (iftype) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_WDS: + radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR); + break; + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_MONITOR: + radar_required = false; + break; + case NL80211_IFTYPE_P2P_DEVICE: + case NUM_NL80211_IFTYPES: + case NL80211_IFTYPE_UNSPECIFIED: + default: + return -EINVAL; + } + + if (radar_required && !radar_detect) + return -EINVAL; + /* Always allow software iftypes */ - if (rdev->wiphy.software_iftypes & BIT(iftype)) + if (rdev->wiphy.software_iftypes & BIT(iftype)) { + if (radar_detect) + return -EINVAL; return 0; + } memset(num, 0, sizeof(num)); memset(used_channels, 0, sizeof(used_channels)); @@ -1275,7 +1307,7 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, used_iftypes |= BIT(wdev_iter->iftype); } - if (total == 1) + if (total == 1 && !radar_detect) return 0; for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { @@ -1308,6 +1340,9 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, } } + if (radar_detect && !(c->radar_detect_widths & radar_detect)) + goto cont; + /* * Finally check that all iftypes that we're currently * using are actually part of this combination. If they -- cgit v0.10.2 From 5a32aff37a02ebc959837f08d09ac8ba65d4f1b0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 21 Dec 2012 12:36:33 +0100 Subject: mac80211: split out chandef tracing macros Some new APIs will require tracing a chandef without it being part of a channel context, so separate out the tracing macros for that. Signed-off-by: Johannes Berg diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index a8270b4..41861b9 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -28,21 +28,27 @@ #define VIF_PR_FMT " vif:%s(%d%s)" #define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : "" -#define CHANCTX_ENTRY __field(u32, control_freq) \ +#define CHANDEF_ENTRY __field(u32, control_freq) \ __field(u32, chan_width) \ __field(u32, center_freq1) \ - __field(u32, center_freq2) \ + __field(u32, center_freq2) +#define CHANDEF_ASSIGN(c) \ + __entry->control_freq = (c)->chan->center_freq; \ + __entry->chan_width = (c)->width; \ + __entry->center_freq1 = (c)->center_freq1; \ + __entry->center_freq1 = (c)->center_freq2; +#define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz" +#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ + __entry->center_freq1, __entry->center_freq2 + +#define CHANCTX_ENTRY CHANDEF_ENTRY \ __field(u8, rx_chains_static) \ __field(u8, rx_chains_dynamic) -#define CHANCTX_ASSIGN __entry->control_freq = ctx->conf.def.chan->center_freq;\ - __entry->chan_width = ctx->conf.def.width; \ - __entry->center_freq1 = ctx->conf.def.center_freq1; \ - __entry->center_freq2 = ctx->conf.def.center_freq2; \ +#define CHANCTX_ASSIGN CHANDEF_ASSIGN(&ctx->conf.def) \ __entry->rx_chains_static = ctx->conf.rx_chains_static; \ __entry->rx_chains_dynamic = ctx->conf.rx_chains_dynamic -#define CHANCTX_PR_FMT " control:%d MHz width:%d center: %d/%d MHz chains:%d/%d" -#define CHANCTX_PR_ARG __entry->control_freq, __entry->chan_width, \ - __entry->center_freq1, __entry->center_freq2, \ +#define CHANCTX_PR_FMT CHANDEF_PR_FMT " chains:%d/%d" +#define CHANCTX_PR_ARG CHANDEF_PR_ARG, \ __entry->rx_chains_static, __entry->rx_chains_dynamic -- cgit v0.10.2 From 9fba0812c15e531c3ff1752174f04234b7a55fc4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Tue, 15 Jan 2013 21:01:24 +0000 Subject: r8169: remove unneeded dirty_rx index MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After commit 6f0333b ("r8169: use 50% less ram for RX ring") the rx ring buffers are always copied making dirty_rx useless. Signed-off-by: Timo Teräs Acked-by: Francois Romieu Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 89184f3..97fdbb1 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -83,7 +83,7 @@ static const int multicast_filter_limit = 32; #define R8169_REGS_SIZE 256 #define R8169_NAPI_WEIGHT 64 #define NUM_TX_DESC 64 /* Number of Tx descriptor registers */ -#define NUM_RX_DESC 256 /* Number of Rx descriptor registers */ +#define NUM_RX_DESC 256U /* Number of Rx descriptor registers */ #define R8169_TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) #define R8169_RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) @@ -727,7 +727,6 @@ struct rtl8169_private { u16 mac_version; u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */ - u32 dirty_rx; u32 dirty_tx; struct rtl8169_stats rx_stats; struct rtl8169_stats tx_stats; @@ -4177,7 +4176,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) static void rtl8169_init_ring_indexes(struct rtl8169_private *tp) { - tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; + tp->dirty_tx = tp->cur_tx = tp->cur_rx = 0; } static void rtl_hw_jumbo_enable(struct rtl8169_private *tp) @@ -5920,7 +5919,7 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT)); /* The infamous DAC f*ckup only happens at boot time */ - if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) { + if ((tp->cp_cmd & PCIDAC) && !tp->cur_rx) { void __iomem *ioaddr = tp->mmio_addr; netif_info(tp, intr, dev, "disabling PCI DAC\n"); @@ -6035,10 +6034,8 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget unsigned int count; cur_rx = tp->cur_rx; - rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; - rx_left = min(rx_left, budget); - for (; rx_left > 0; rx_left--, cur_rx++) { + for (rx_left = min(budget, NUM_RX_DESC); rx_left > 0; rx_left--, cur_rx++) { unsigned int entry = cur_rx % NUM_RX_DESC; struct RxDesc *desc = tp->RxDescArray + entry; u32 status; @@ -6123,8 +6120,6 @@ process_pkt: count = cur_rx - tp->cur_rx; tp->cur_rx = cur_rx; - tp->dirty_rx += count; - return count; } -- cgit v0.10.2 From 07f623d3b278abe88508c1c59d7c1089b4a56789 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 17 Jan 2013 12:10:57 +0900 Subject: ipv6: Fix endianess warning in ip6_flow_hdr(). Commit 3e4e4c1f ("ipv6: Introduce ip6_flow_hdr() to fill version, tclass and flowlabel.) uses ntohl(), which should be htonl(). Found by Fengguang Wu . Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index dfc1363..a0909c7 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -629,7 +629,7 @@ extern void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt); static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, __be32 flowlabel) { - *(__be32 *)hdr = ntohl(0x60000000 | (tclass << 20)) | flowlabel; + *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; } static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) -- cgit v0.10.2 From 5bd30d398792eb6351da2087fe81bbf755900991 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 17 Jan 2013 12:21:08 +0800 Subject: netpoll: fix a missing dev refcounting __dev_get_by_name() doesn't refcount the network device, so we have to do this by ourselves. Noticed by Eric. Cc: Eric Dumazet Cc: Jiri Pirko Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index a5ad1c1..a9b1004 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -1056,6 +1056,7 @@ int netpoll_setup(struct netpoll *np) err = -ENODEV; goto unlock; } + dev_hold(ndev); if (netdev_master_upper_dev_get(ndev)) { np_err(np, "%s is a slave device, aborting\n", np->dev_name); -- cgit v0.10.2 From d59577b6ffd313d0ab3be39cb1ab47e29bdc9182 Mon Sep 17 00:00:00 2001 From: Vincent Bernat Date: Wed, 16 Jan 2013 22:55:49 +0100 Subject: sk-filter: Add ability to lock a socket filter program While a privileged program can open a raw socket, attach some restrictive filter and drop its privileges (or send the socket to an unprivileged program through some Unix socket), the filter can still be removed or modified by the unprivileged program. This commit adds a socket option to lock the filter (SO_LOCK_FILTER) preventing any modification of a socket filter program. This is similar to OpenBSD BIOCLOCK ioctl on bpf sockets, except even root is not allowed change/drop the filter. The state of the lock can be read with getsockopt(). No error is triggered if the state is not changed. -EPERM is returned when a user tries to remove the lock or to change/remove the filter while the lock is active. The check is done directly in sk_attach_filter() and sk_detach_filter() and does not affect only setsockopt() syscall. Signed-off-by: Vincent Bernat Signed-off-by: David S. Miller diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index bbf2005..cdb3e40 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -17,12 +17,12 @@ creating filters. LSF is much simpler than BPF. One does not have to worry about devices or anything like that. You simply create your filter -code, send it to the kernel via the SO_ATTACH_FILTER ioctl and +code, send it to the kernel via the SO_ATTACH_FILTER option and if your filter code passes the kernel check on it, you then immediately begin filtering data on that socket. You can also detach filters from your socket via the -SO_DETACH_FILTER ioctl. This will probably not be used much +SO_DETACH_FILTER option. This will probably not be used much since when you close a socket that has a filter on it the filter is automagically removed. The other less common case may be adding a different filter on the same socket where you had another @@ -31,12 +31,19 @@ the old one and placing your new one in its place, assuming your filter has passed the checks, otherwise if it fails the old filter will remain on that socket. +SO_LOCK_FILTER option allows to lock the filter attached to a +socket. Once set, a filter cannot be removed or changed. This allows +one process to setup a socket, attach a filter, lock it then drop +privileges and be assured that the filter will be kept until the +socket is closed. + Examples ======== Ioctls- setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &Filter, sizeof(Filter)); setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &value, sizeof(value)); +setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER, &value, sizeof(value)); See the BSD bpf.4 manpage and the BSD Packet Filter paper written by Steven McCanne and Van Jacobson of Lawrence Berkeley Laboratory. diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h index 097c157..755702e 100644 --- a/arch/alpha/include/uapi/asm/socket.h +++ b/arch/alpha/include/uapi/asm/socket.h @@ -77,5 +77,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 #endif /* _UAPI_ASM_SOCKET_H */ diff --git a/arch/avr32/include/uapi/asm/socket.h b/arch/avr32/include/uapi/asm/socket.h index 486df68..f3f38a0 100644 --- a/arch/avr32/include/uapi/asm/socket.h +++ b/arch/avr32/include/uapi/asm/socket.h @@ -70,4 +70,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* __ASM_AVR32_SOCKET_H */ diff --git a/arch/cris/include/uapi/asm/socket.h b/arch/cris/include/uapi/asm/socket.h index b681b04..406b583 100644 --- a/arch/cris/include/uapi/asm/socket.h +++ b/arch/cris/include/uapi/asm/socket.h @@ -72,6 +72,8 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_SOCKET_H */ diff --git a/arch/frv/include/uapi/asm/socket.h b/arch/frv/include/uapi/asm/socket.h index 871f89b..d8e1132 100644 --- a/arch/frv/include/uapi/asm/socket.h +++ b/arch/frv/include/uapi/asm/socket.h @@ -70,5 +70,7 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_SOCKET_H */ diff --git a/arch/h8300/include/uapi/asm/socket.h b/arch/h8300/include/uapi/asm/socket.h index 90a2e57..c8b87a8 100644 --- a/arch/h8300/include/uapi/asm/socket.h +++ b/arch/h8300/include/uapi/asm/socket.h @@ -70,4 +70,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_SOCKET_H */ diff --git a/arch/ia64/include/uapi/asm/socket.h b/arch/ia64/include/uapi/asm/socket.h index 23d6759..f390896 100644 --- a/arch/ia64/include/uapi/asm/socket.h +++ b/arch/ia64/include/uapi/asm/socket.h @@ -79,4 +79,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_IA64_SOCKET_H */ diff --git a/arch/m32r/include/uapi/asm/socket.h b/arch/m32r/include/uapi/asm/socket.h index 5e7088a..6a89515 100644 --- a/arch/m32r/include/uapi/asm/socket.h +++ b/arch/m32r/include/uapi/asm/socket.h @@ -70,4 +70,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_M32R_SOCKET_H */ diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h index 17307ab..9d11a77 100644 --- a/arch/mips/include/uapi/asm/socket.h +++ b/arch/mips/include/uapi/asm/socket.h @@ -90,5 +90,6 @@ To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 #endif /* _UAPI_ASM_SOCKET_H */ diff --git a/arch/mn10300/include/uapi/asm/socket.h b/arch/mn10300/include/uapi/asm/socket.h index af5366b..ab702c4 100644 --- a/arch/mn10300/include/uapi/asm/socket.h +++ b/arch/mn10300/include/uapi/asm/socket.h @@ -70,4 +70,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_SOCKET_H */ diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h index d9ff473..da2c8d3 100644 --- a/arch/parisc/include/uapi/asm/socket.h +++ b/arch/parisc/include/uapi/asm/socket.h @@ -69,6 +69,7 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 0x4024 +#define SO_LOCK_FILTER 0x4025 /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h index eb0b186..e6ca318 100644 --- a/arch/powerpc/include/uapi/asm/socket.h +++ b/arch/powerpc/include/uapi/asm/socket.h @@ -77,4 +77,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/arch/s390/include/uapi/asm/socket.h b/arch/s390/include/uapi/asm/socket.h index 436d07c..9ce60b6 100644 --- a/arch/s390/include/uapi/asm/socket.h +++ b/arch/s390/include/uapi/asm/socket.h @@ -76,4 +76,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _ASM_SOCKET_H */ diff --git a/arch/sparc/include/uapi/asm/socket.h b/arch/sparc/include/uapi/asm/socket.h index c83a937..fbbba57 100644 --- a/arch/sparc/include/uapi/asm/socket.h +++ b/arch/sparc/include/uapi/asm/socket.h @@ -66,6 +66,7 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 0x0027 +#define SO_LOCK_FILTER 0x0028 /* Security levels - as per NRL IPv6 - don't actually do anything */ #define SO_SECURITY_AUTHENTICATION 0x5001 diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h index 38079be..dbf3164 100644 --- a/arch/xtensa/include/uapi/asm/socket.h +++ b/arch/xtensa/include/uapi/asm/socket.h @@ -81,4 +81,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* _XTENSA_SOCKET_H */ diff --git a/include/net/sock.h b/include/net/sock.h index 182ca99..5a34e2f 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -664,6 +664,7 @@ enum sock_flags { * Will use last 4 bytes of packet sent from * user-space instead. */ + SOCK_FILTER_LOCKED, /* Filter cannot be changed anymore */ }; static inline void sock_copy_flags(struct sock *nsk, struct sock *osk) diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h index 2d32d07..3f6a992 100644 --- a/include/uapi/asm-generic/socket.h +++ b/include/uapi/asm-generic/socket.h @@ -73,4 +73,6 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + #endif /* __ASM_GENERIC_SOCKET_H */ diff --git a/net/core/filter.c b/net/core/filter.c index 2ead2a9..2e20b55 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -721,6 +721,9 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk) unsigned int fsize = sizeof(struct sock_filter) * fprog->len; int err; + if (sock_flag(sk, SOCK_FILTER_LOCKED)) + return -EPERM; + /* Make sure new filter is there and in the right amounts. */ if (fprog->filter == NULL) return -EINVAL; @@ -757,6 +760,9 @@ int sk_detach_filter(struct sock *sk) int ret = -ENOENT; struct sk_filter *filter; + if (sock_flag(sk, SOCK_FILTER_LOCKED)) + return -EPERM; + filter = rcu_dereference_protected(sk->sk_filter, sock_owned_by_user(sk)); if (filter) { diff --git a/net/core/sock.c b/net/core/sock.c index bc131d4..8258fb7 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -861,6 +861,13 @@ set_rcvbuf: ret = sk_detach_filter(sk); break; + case SO_LOCK_FILTER: + if (sock_flag(sk, SOCK_FILTER_LOCKED) && !valbool) + ret = -EPERM; + else + sock_valbool_flag(sk, SOCK_FILTER_LOCKED, valbool); + break; + case SO_PASSSEC: if (valbool) set_bit(SOCK_PASSSEC, &sock->flags); @@ -1140,6 +1147,10 @@ int sock_getsockopt(struct socket *sock, int level, int optname, goto lenout; + case SO_LOCK_FILTER: + v.val = sock_flag(sk, SOCK_FILTER_LOCKED); + break; + default: return -ENOPROTOOPT; } -- cgit v0.10.2 From 7a9885b93bb623524468b37d04146d3422e099eb Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 17 Jan 2013 16:34:11 +0800 Subject: xfrm: use separated locks to protect pointers of struct xfrm_state_afinfo afinfo->type_map and afinfo->mode_map deserve separated locks, they are different things. We should just take RCU read lock to protect afinfo itself, but not for the inner pointers. Cc: Steffen Klassert Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 1522f19..0adae91 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -168,57 +168,45 @@ int __xfrm_state_delete(struct xfrm_state *x); int km_query(struct xfrm_state *x, struct xfrm_tmpl *t, struct xfrm_policy *pol); void km_state_expired(struct xfrm_state *x, int hard, u32 portid); -static struct xfrm_state_afinfo *xfrm_state_lock_afinfo(unsigned int family) -{ - struct xfrm_state_afinfo *afinfo; - if (unlikely(family >= NPROTO)) - return NULL; - spin_lock_bh(&xfrm_state_afinfo_lock); - afinfo = xfrm_state_afinfo[family]; - if (unlikely(!afinfo)) - spin_unlock_bh(&xfrm_state_afinfo_lock); - return afinfo; -} - -static void xfrm_state_unlock_afinfo(struct xfrm_state_afinfo *afinfo) -{ - spin_unlock_bh(&xfrm_state_afinfo_lock); -} - +static DEFINE_SPINLOCK(xfrm_type_lock); int xfrm_register_type(const struct xfrm_type *type, unsigned short family) { - struct xfrm_state_afinfo *afinfo = xfrm_state_lock_afinfo(family); + struct xfrm_state_afinfo *afinfo = xfrm_state_get_afinfo(family); const struct xfrm_type **typemap; int err = 0; if (unlikely(afinfo == NULL)) return -EAFNOSUPPORT; typemap = afinfo->type_map; + spin_lock_bh(&xfrm_type_lock); if (likely(typemap[type->proto] == NULL)) typemap[type->proto] = type; else err = -EEXIST; - xfrm_state_unlock_afinfo(afinfo); + spin_unlock_bh(&xfrm_type_lock); + xfrm_state_put_afinfo(afinfo); return err; } EXPORT_SYMBOL(xfrm_register_type); int xfrm_unregister_type(const struct xfrm_type *type, unsigned short family) { - struct xfrm_state_afinfo *afinfo = xfrm_state_lock_afinfo(family); + struct xfrm_state_afinfo *afinfo = xfrm_state_get_afinfo(family); const struct xfrm_type **typemap; int err = 0; if (unlikely(afinfo == NULL)) return -EAFNOSUPPORT; typemap = afinfo->type_map; + spin_lock_bh(&xfrm_type_lock); if (unlikely(typemap[type->proto] != type)) err = -ENOENT; else typemap[type->proto] = NULL; - xfrm_state_unlock_afinfo(afinfo); + spin_unlock_bh(&xfrm_type_lock); + xfrm_state_put_afinfo(afinfo); return err; } EXPORT_SYMBOL(xfrm_unregister_type); @@ -255,6 +243,7 @@ static void xfrm_put_type(const struct xfrm_type *type) module_put(type->owner); } +static DEFINE_SPINLOCK(xfrm_mode_lock); int xfrm_register_mode(struct xfrm_mode *mode, int family) { struct xfrm_state_afinfo *afinfo; @@ -264,12 +253,13 @@ int xfrm_register_mode(struct xfrm_mode *mode, int family) if (unlikely(mode->encap >= XFRM_MODE_MAX)) return -EINVAL; - afinfo = xfrm_state_lock_afinfo(family); + afinfo = xfrm_state_get_afinfo(family); if (unlikely(afinfo == NULL)) return -EAFNOSUPPORT; err = -EEXIST; modemap = afinfo->mode_map; + spin_lock_bh(&xfrm_mode_lock); if (modemap[mode->encap]) goto out; @@ -282,7 +272,8 @@ int xfrm_register_mode(struct xfrm_mode *mode, int family) err = 0; out: - xfrm_state_unlock_afinfo(afinfo); + spin_unlock_bh(&xfrm_mode_lock); + xfrm_state_put_afinfo(afinfo); return err; } EXPORT_SYMBOL(xfrm_register_mode); @@ -296,19 +287,21 @@ int xfrm_unregister_mode(struct xfrm_mode *mode, int family) if (unlikely(mode->encap >= XFRM_MODE_MAX)) return -EINVAL; - afinfo = xfrm_state_lock_afinfo(family); + afinfo = xfrm_state_get_afinfo(family); if (unlikely(afinfo == NULL)) return -EAFNOSUPPORT; err = -ENOENT; modemap = afinfo->mode_map; + spin_lock_bh(&xfrm_mode_lock); if (likely(modemap[mode->encap] == mode)) { modemap[mode->encap] = NULL; module_put(mode->afinfo->owner); err = 0; } - xfrm_state_unlock_afinfo(afinfo); + spin_unlock_bh(&xfrm_mode_lock); + xfrm_state_put_afinfo(afinfo); return err; } EXPORT_SYMBOL(xfrm_unregister_mode); -- cgit v0.10.2 From c2a936600f78aea00d3312ea4b66a79a4619f9b4 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 15 Jan 2013 07:16:35 +0000 Subject: net: increase fragment memory usage limits Increase the amount of memory usage limits for incomplete IP fragments. Arguing for new thresh high/low values: High threshold = 4 MBytes Low threshold = 3 MBytes The fragmentation memory accounting code, tries to account for the real memory usage, by measuring both the size of frag queue struct (inet_frag_queue (ipv4:ipq/ipv6:frag_queue)) and the SKB's truesize. We want to be able to handle/hold-on-to enough fragments, to ensure good performance, without causing incomplete fragments to hurt scalability, by causing the number of inet_frag_queue to grow too much (resulting longer searches for frag queues). For IPv4, how much memory does the largest frag consume. Maximum size fragment is 64K, which is approx 44 fragments with MTU(1500) sized packets. Sizeof(struct ipq) is 200. A 1500 byte packet results in a truesize of 2944 (not 2048 as I first assumed) (44*2944)+200 = 129736 bytes The current default high thresh of 262144 bytes, is obviously problematic, as only two 64K fragments can fit in the queue at the same time. How many 64K fragment can we fit into 4 MBytes: 4*2^20/((44*2944)+200) = 32.34 fragment in queues An attacker could send a separate/distinct fake fragment packets per queue, causing us to allocate one inet_frag_queue per packet, and thus attacking the hash table and its lists. How many frag queue do we need to store, and given a current hash size of 64, what is the average list length. Using one MTU sized fragment per inet_frag_queue, each consuming (2944+200) 3144 bytes. 4*2^20/(2944+200) = 1334 frag queues -> 21 avg list length An attack could send small fragments, the smallest packet I could send resulted in a truesize of 896 bytes (I'm a little surprised by this). 4*2^20/(896+200) = 3827 frag queues -> 59 avg list length When increasing these number, we also need to followup with improvements, that is going to help scalability. Simply increasing the hash size, is not enough as the current implementation does not have a per hash bucket locking. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index a0909c7..51a068a 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -292,8 +292,8 @@ static inline int ip6_frag_mem(struct net *net) } #endif -#define IPV6_FRAG_HIGH_THRESH (256 * 1024) /* 262144 */ -#define IPV6_FRAG_LOW_THRESH (192 * 1024) /* 196608 */ +#define IPV6_FRAG_HIGH_THRESH (4 * 1024*1024) /* 4194304 */ +#define IPV6_FRAG_LOW_THRESH (3 * 1024*1024) /* 3145728 */ #define IPV6_FRAG_TIMEOUT (60 * HZ) /* 60 seconds */ extern int __ipv6_addr_type(const struct in6_addr *addr); diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index eb9d63a..f55a4e6 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -851,14 +851,22 @@ static inline void ip4_frags_ctl_register(void) static int __net_init ipv4_frags_init_net(struct net *net) { - /* - * Fragment cache limits. We will commit 256K at one time. Should we - * cross that limit we will prune down to 192K. This should cope with - * even the most extreme cases without allowing an attacker to - * measurably harm machine performance. + /* Fragment cache limits. + * + * The fragment memory accounting code, (tries to) account for + * the real memory usage, by measuring both the size of frag + * queue struct (inet_frag_queue (ipv4:ipq/ipv6:frag_queue)) + * and the SKB's truesize. + * + * A 64K fragment consumes 129736 bytes (44*2944)+200 + * (1500 truesize == 2944, sizeof(struct ipq) == 200) + * + * We will commit 4MB at one time. Should we cross that limit + * we will prune down to 3MB, making room for approx 8 big 64K + * fragments 8x128k. */ - net->ipv4.frags.high_thresh = 256 * 1024; - net->ipv4.frags.low_thresh = 192 * 1024; + net->ipv4.frags.high_thresh = 4 * 1024 * 1024; + net->ipv4.frags.low_thresh = 3 * 1024 * 1024; /* * Important NOTE! Fragment queue must be destroyed before MSL expires. * RFC791 is wrong proposing to prolongate timer each fragment arrival -- cgit v0.10.2 From 512613d7dde7b679597485e9335bd64e90df78fa Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Wed, 16 Jan 2013 22:30:17 +0100 Subject: ipv6: fix ipv6_prefix_equal64_half mask conversion Fix the 64bit optimized version of ipv6_prefix_equal to convert the bitmask to network byte order only after the bit-shift. The bug was introduced in: 3867517 ipv6: 64bit version of ipv6_prefix_equal(). Signed-off-by: Fabio Baltieri Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 51a068a..464c6f7 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -404,7 +404,7 @@ static inline bool __ipv6_prefix_equal64_half(const __be64 *a1, const __be64 *a2, unsigned int len) { - if (len && ((*a1 ^ *a2) & cpu_to_be64(~0UL) << (64 - len))) + if (len && ((*a1 ^ *a2) & cpu_to_be64((~0UL) << (64 - len)))) return false; return true; } -- cgit v0.10.2 From bc6c47b50c67db420d1fe969351b5d196c0c43c4 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Wed, 16 Jan 2013 23:29:59 +0000 Subject: cxgb3: Fix Tx csum stats Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index dd901c5..9096dc0 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -1278,7 +1278,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) } /* update port statistics */ - if (skb->ip_summed == CHECKSUM_COMPLETE) + if (skb->ip_summed == CHECKSUM_PARTIAL) qs->port_stats[SGE_PSTAT_TX_CSUM]++; if (skb_shinfo(skb)->gso_size) qs->port_stats[SGE_PSTAT_TSO]++; -- cgit v0.10.2 From cbf1de72324a8105ddcc3d9ce9acbc613faea17e Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 17 Jan 2013 03:26:21 +0000 Subject: bnx2x: fix GRO parameters bnx2x does an internal GRO pass but doesn't provide gso_segs, thus breaking qdisc_pkt_len_init() in case ingress qdisc is used. We store gso_segs in NAPI_GRO_CB(skb)->count, where tcp_gro_complete() expects to find the number of aggregated segments. Signed-off-by: Yuval Mintz Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 18fc26e..49810a0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -439,31 +439,34 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, */ #define TPA_TSTAMP_OPT_LEN 12 /** - * bnx2x_set_lro_mss - calculate the approximate value of the MSS + * bnx2x_set_gro_params - compute GRO values * - * @bp: driver handle + * @skb: packet skb * @parsing_flags: parsing flags from the START CQE * @len_on_bd: total length of the first packet for the * aggregation. + * @pkt_len: length of all segments * * Approximate value of the MSS for this aggregation calculated using * the first packet of it. + * Compute number of aggregated segments, and gso_type */ -static u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags, - u16 len_on_bd) +static void bnx2x_set_gro_params(struct sk_buff *skb, u16 parsing_flags, + u16 len_on_bd, unsigned int pkt_len) { - /* - * TPA arrgregation won't have either IP options or TCP options + /* TPA aggregation won't have either IP options or TCP options * other than timestamp or IPv6 extension headers. */ u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr); if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == - PRS_FLAG_OVERETH_IPV6) + PRS_FLAG_OVERETH_IPV6) { hdrs_len += sizeof(struct ipv6hdr); - else /* IPv4 */ + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + } else { hdrs_len += sizeof(struct iphdr); - + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + } /* Check if there was a TCP timestamp, if there is it's will * always be 12 bytes length: nop nop kind length echo val. @@ -473,7 +476,13 @@ static u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags, if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG) hdrs_len += TPA_TSTAMP_OPT_LEN; - return len_on_bd - hdrs_len; + skb_shinfo(skb)->gso_size = len_on_bd - hdrs_len; + + /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count + * to skb_shinfo(skb)->gso_segs + */ + NAPI_GRO_CB(skb)->count = DIV_ROUND_UP(pkt_len - hdrs_len, + skb_shinfo(skb)->gso_size); } static int bnx2x_alloc_rx_sge(struct bnx2x *bp, @@ -527,19 +536,9 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, } /* This is needed in order to enable forwarding support */ - if (frag_size) { - skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp, - tpa_info->parsing_flags, len_on_bd); - - /* set for GRO */ - if (fp->mode == TPA_MODE_GRO && skb_shinfo(skb)->gso_size) - skb_shinfo(skb)->gso_type = - (GET_FLAG(tpa_info->parsing_flags, - PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == - PRS_FLAG_OVERETH_IPV6) ? - SKB_GSO_TCPV6 : SKB_GSO_TCPV4; - } - + if (frag_size) + bnx2x_set_gro_params(skb, tpa_info->parsing_flags, len_on_bd, + le16_to_cpu(cqe->pkt_len)); #ifdef BNX2X_STOP_ON_ERROR if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) { @@ -651,7 +650,7 @@ static void bnx2x_gro_receive(struct bnx2x *bp, struct bnx2x_fastpath *fp, struct sk_buff *skb) { #ifdef CONFIG_INET - if (fp->mode == TPA_MODE_GRO && skb_shinfo(skb)->gso_size) { + if (skb_shinfo(skb)->gso_size) { skb_set_network_header(skb, 0); switch (be16_to_cpu(skb->protocol)) { case ETH_P_IP: -- cgit v0.10.2 From 7266507d89991fa1e989283e4e032c6d9357fe26 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Mon, 17 Dec 2012 18:33:58 +0000 Subject: netfilter: nf_ct_sip: support Cisco 7941/7945 IP phones Most SIP devices use a source port of 5060/udp on SIP requests, so the response automatically comes back to port 5060: phone_ip:5060 -> proxy_ip:5060 REGISTER proxy_ip:5060 -> phone_ip:5060 100 Trying The newer Cisco IP phones, however, use a randomly chosen high source port for the SIP request but expect the response on port 5060: phone_ip:49173 -> proxy_ip:5060 REGISTER proxy_ip:5060 -> phone_ip:5060 100 Trying Standard Linux NAT, with or without nf_nat_sip, will send the reply back to port 49173, not 5060: phone_ip:49173 -> proxy_ip:5060 REGISTER proxy_ip:5060 -> phone_ip:49173 100 Trying But the phone is not listening on 49173, so it will never see the reply. This patch modifies nf_*_sip to work around this quirk by extracting the SIP response port from the Via: header, iff the source IP in the packet header matches the source IP in the SIP request. Signed-off-by: Kevin Cernekee Acked-by: Eric Dumazet Cc: Patrick McHardy Signed-off-by: Pablo Neira Ayuso diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 387bdd0..ba7f571 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -4,12 +4,15 @@ #include +#include + #define SIP_PORT 5060 #define SIP_TIMEOUT 3600 struct nf_ct_sip_master { unsigned int register_cseq; unsigned int invite_cseq; + __be16 forced_dport; }; enum sip_expectation_classes { diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index df8f4f2..72a67bb 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1440,8 +1440,25 @@ static int process_sip_request(struct sk_buff *skb, unsigned int protoff, { enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); + struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct); + enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo); unsigned int matchoff, matchlen; unsigned int cseq, i; + union nf_inet_addr addr; + __be16 port; + + /* Many Cisco IP phones use a high source port for SIP requests, but + * listen for the response on port 5060. If we are the local + * router for one of these phones, save the port number from the + * Via: header so that nf_nat_sip can redirect the responses to + * the correct port. + */ + if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen, + SIP_HDR_VIA_UDP, NULL, &matchoff, + &matchlen, &addr, &port) > 0 && + port != ct->tuplehash[dir].tuple.src.u.udp.port && + nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3)) + ct_sip_info->forced_dport = port; for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) { const struct sip_handler *handler; diff --git a/net/netfilter/nf_nat_sip.c b/net/netfilter/nf_nat_sip.c index 16303c7..5951146e 100644 --- a/net/netfilter/nf_nat_sip.c +++ b/net/netfilter/nf_nat_sip.c @@ -95,6 +95,7 @@ static int map_addr(struct sk_buff *skb, unsigned int protoff, enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo); + struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct); char buffer[INET6_ADDRSTRLEN + sizeof("[]:nnnnn")]; unsigned int buflen; union nf_inet_addr newaddr; @@ -107,7 +108,8 @@ static int map_addr(struct sk_buff *skb, unsigned int protoff, } else if (nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.dst.u3, addr) && ct->tuplehash[dir].tuple.dst.u.udp.port == port) { newaddr = ct->tuplehash[!dir].tuple.src.u3; - newport = ct->tuplehash[!dir].tuple.src.u.udp.port; + newport = ct_sip_info->forced_dport ? : + ct->tuplehash[!dir].tuple.src.u.udp.port; } else return 1; @@ -144,6 +146,7 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo); + struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct); unsigned int coff, matchoff, matchlen; enum sip_header_types hdr; union nf_inet_addr addr; @@ -258,6 +261,21 @@ next: !map_sip_addr(skb, protoff, dataoff, dptr, datalen, SIP_HDR_TO)) return NF_DROP; + /* Mangle destination port for Cisco phones, then fix up checksums */ + if (dir == IP_CT_DIR_REPLY && ct_sip_info->forced_dport) { + struct udphdr *uh; + + if (!skb_make_writable(skb, skb->len)) + return NF_DROP; + + uh = (void *)skb->data + protoff; + uh->dest = ct_sip_info->forced_dport; + + if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, + 0, 0, NULL, 0)) + return NF_DROP; + } + return NF_ACCEPT; } @@ -311,8 +329,10 @@ static unsigned int nf_nat_sip_expect(struct sk_buff *skb, unsigned int protoff, enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo); + struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct); union nf_inet_addr newaddr; u_int16_t port; + __be16 srcport; char buffer[INET6_ADDRSTRLEN + sizeof("[]:nnnnn")]; unsigned int buflen; @@ -326,8 +346,9 @@ static unsigned int nf_nat_sip_expect(struct sk_buff *skb, unsigned int protoff, /* If the signalling port matches the connection's source port in the * original direction, try to use the destination port in the opposite * direction. */ - if (exp->tuple.dst.u.udp.port == - ct->tuplehash[dir].tuple.src.u.udp.port) + srcport = ct_sip_info->forced_dport ? : + ct->tuplehash[dir].tuple.src.u.udp.port; + if (exp->tuple.dst.u.udp.port == srcport) port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port); else port = ntohs(exp->tuple.dst.u.udp.port); -- cgit v0.10.2 From c539f01717c239cfa0921dd43927afc976f1eedc Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 11 Jan 2013 06:30:44 +0000 Subject: netfilter: add connlabel conntrack extension similar to connmarks, except labels are bit-based; i.e. all labels may be attached to a flow at the same time. Up to 128 labels are supported. Supporting more labels is possible, but requires increasing the ct offset delta from u8 to u16 type due to increased extension sizes. Mapping of bit-identifier to label name is done in userspace. The extension is enabled at run-time once "-m connlabel" netfilter rules are added. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h index 8b4d1fc2..977bc8a 100644 --- a/include/net/netfilter/nf_conntrack_extend.h +++ b/include/net/netfilter/nf_conntrack_extend.h @@ -23,6 +23,9 @@ enum nf_ct_ext_id { #ifdef CONFIG_NF_CONNTRACK_TIMEOUT NF_CT_EXT_TIMEOUT, #endif +#ifdef CONFIG_NF_CONNTRACK_LABELS + NF_CT_EXT_LABELS, +#endif NF_CT_EXT_NUM, }; @@ -33,6 +36,7 @@ enum nf_ct_ext_id { #define NF_CT_EXT_ZONE_TYPE struct nf_conntrack_zone #define NF_CT_EXT_TSTAMP_TYPE struct nf_conn_tstamp #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout +#define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels /* Extensions: optional stuff which isn't permanently in struct. */ struct nf_ct_ext { diff --git a/include/net/netfilter/nf_conntrack_labels.h b/include/net/netfilter/nf_conntrack_labels.h new file mode 100644 index 0000000..b94fe31 --- /dev/null +++ b/include/net/netfilter/nf_conntrack_labels.h @@ -0,0 +1,55 @@ +#include +#include +#include +#include +#include +#include + +#include + +struct nf_conn_labels { + u8 words; + unsigned long bits[]; +}; + +static inline struct nf_conn_labels *nf_ct_labels_find(const struct nf_conn *ct) +{ +#ifdef CONFIG_NF_CONNTRACK_LABELS + return nf_ct_ext_find(ct, NF_CT_EXT_LABELS); +#else + return NULL; +#endif +} + +static inline struct nf_conn_labels *nf_ct_labels_ext_add(struct nf_conn *ct) +{ +#ifdef CONFIG_NF_CONNTRACK_LABELS + struct nf_conn_labels *cl_ext; + struct net *net = nf_ct_net(ct); + u8 words; + + words = ACCESS_ONCE(net->ct.label_words); + if (words == 0 || WARN_ON_ONCE(words > 8)) + return NULL; + + cl_ext = nf_ct_ext_add_length(ct, NF_CT_EXT_LABELS, + words * sizeof(long), GFP_ATOMIC); + if (cl_ext != NULL) + cl_ext->words = words; + + return cl_ext; +#else + return NULL; +#endif +} + +bool nf_connlabel_match(const struct nf_conn *ct, u16 bit); +int nf_connlabel_set(struct nf_conn *ct, u16 bit); + +#ifdef CONFIG_NF_CONNTRACK_LABELS +int nf_conntrack_labels_init(struct net *net); +void nf_conntrack_labels_fini(struct net *net); +#else +static inline int nf_conntrack_labels_init(struct net *n) { return 0; } +static inline void nf_conntrack_labels_fini(struct net *net) {} +#endif diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 923cb20..c9c0c53 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -84,6 +84,10 @@ struct netns_ct { int sysctl_auto_assign_helper; bool auto_assign_helper_warned; struct nf_ip_net nf_ct_proto; +#if defined(CONFIG_NF_CONNTRACK_LABELS) + unsigned int labels_used; + u8 label_words; +#endif #ifdef CONFIG_NF_NAT_NEEDED struct hlist_head *nat_bysource; unsigned int nat_htable_size; diff --git a/include/uapi/linux/netfilter/xt_connlabel.h b/include/uapi/linux/netfilter/xt_connlabel.h new file mode 100644 index 0000000..c4bc9ee --- /dev/null +++ b/include/uapi/linux/netfilter/xt_connlabel.h @@ -0,0 +1,12 @@ +#include + +#define XT_CONNLABEL_MAXBIT 127 +enum xt_connlabel_mtopts { + XT_CONNLABEL_OP_INVERT = 1 << 0, + XT_CONNLABEL_OP_SET = 1 << 1, +}; + +struct xt_connlabel_mtinfo { + __u16 bit; + __u16 options; +}; diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 49e96df..bb48607 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -124,6 +124,12 @@ config NF_CONNTRACK_TIMESTAMP If unsure, say `N'. +config NF_CONNTRACK_LABELS + bool + help + This option enables support for assigning user-defined flag bits + to connection tracking entries. It selected by the connlabel match. + config NF_CT_PROTO_DCCP tristate 'DCCP protocol connection tracking support (EXPERIMENTAL)' depends on EXPERIMENTAL @@ -842,6 +848,18 @@ config NETFILTER_XT_MATCH_CONNBYTES If you want to compile it as a module, say M here and read . If unsure, say `N'. +config NETFILTER_XT_MATCH_CONNLABEL + tristate '"connlabel" match support' + select NF_CONNTRACK_LABELS + depends on NETFILTER_ADVANCED + ---help--- + This match allows you to test and assign userspace-defined labels names + to a connection. The kernel only stores bit values - mapping + names to bits is done by userspace. + + Unlike connmark, more than 32 flag bits may be assigned to a + connection simultaneously. + config NETFILTER_XT_MATCH_CONNLIMIT tristate '"connlimit" match support"' depends on NF_CONNTRACK diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile index 3259697..b3bbda6 100644 --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile @@ -4,6 +4,7 @@ nf_conntrack-y := nf_conntrack_core.o nf_conntrack_standalone.o nf_conntrack_exp nf_conntrack-$(CONFIG_NF_CONNTRACK_TIMEOUT) += nf_conntrack_timeout.o nf_conntrack-$(CONFIG_NF_CONNTRACK_TIMESTAMP) += nf_conntrack_timestamp.o nf_conntrack-$(CONFIG_NF_CONNTRACK_EVENTS) += nf_conntrack_ecache.o +nf_conntrack-$(CONFIG_NF_CONNTRACK_LABELS) += nf_conntrack_labels.o obj-$(CONFIG_NETFILTER) = netfilter.o @@ -101,6 +102,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_ADDRTYPE) += xt_addrtype.o obj-$(CONFIG_NETFILTER_XT_MATCH_CLUSTER) += xt_cluster.o obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o obj-$(CONFIG_NETFILTER_XT_MATCH_CONNBYTES) += xt_connbytes.o +obj-$(CONFIG_NETFILTER_XT_MATCH_CONNLABEL) += xt_connlabel.o obj-$(CONFIG_NETFILTER_XT_MATCH_CONNLIMIT) += xt_connlimit.o obj-$(CONFIG_NETFILTER_XT_MATCH_CONNTRACK) += xt_conntrack.o obj-$(CONFIG_NETFILTER_XT_MATCH_CPU) += xt_cpu.o diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index e4a0c4f..85aa4b7 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -763,6 +764,7 @@ void nf_conntrack_free(struct nf_conn *ct) } EXPORT_SYMBOL_GPL(nf_conntrack_free); + /* Allocate a new conntrack: we return -ENOMEM if classification failed due to stress. Otherwise it really is unclassifiable. */ static struct nf_conntrack_tuple_hash * @@ -809,6 +811,7 @@ init_conntrack(struct net *net, struct nf_conn *tmpl, nf_ct_acct_ext_add(ct, GFP_ATOMIC); nf_ct_tstamp_ext_add(ct, GFP_ATOMIC); + nf_ct_labels_ext_add(ct); ecache = tmpl ? nf_ct_ecache_find(tmpl) : NULL; nf_ct_ecache_ext_add(ct, ecache ? ecache->ctmask : 0, @@ -1352,6 +1355,7 @@ static void nf_conntrack_cleanup_net(struct net *net) } nf_ct_free_hashtable(net->ct.hash, net->ct.htable_size); + nf_conntrack_labels_fini(net); nf_conntrack_helper_fini(net); nf_conntrack_timeout_fini(net); nf_conntrack_ecache_fini(net); @@ -1583,7 +1587,15 @@ static int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_helper_init(net); if (ret < 0) goto err_helper; + + ret = nf_conntrack_labels_init(net); + if (ret < 0) + goto err_labels; + return 0; + +err_labels: + nf_conntrack_helper_fini(net); err_helper: nf_conntrack_timeout_fini(net); err_timeout: diff --git a/net/netfilter/nf_conntrack_labels.c b/net/netfilter/nf_conntrack_labels.c new file mode 100644 index 0000000..0c542f4 --- /dev/null +++ b/net/netfilter/nf_conntrack_labels.c @@ -0,0 +1,72 @@ +/* + * test/set flag bits stored in conntrack extension area. + * + * (C) 2013 Astaro GmbH & Co KG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +static unsigned int label_bits(const struct nf_conn_labels *l) +{ + unsigned int longs = l->words; + return longs * BITS_PER_LONG; +} + +bool nf_connlabel_match(const struct nf_conn *ct, u16 bit) +{ + struct nf_conn_labels *labels = nf_ct_labels_find(ct); + + if (!labels) + return false; + + return bit < label_bits(labels) && test_bit(bit, labels->bits); +} +EXPORT_SYMBOL_GPL(nf_connlabel_match); + +int nf_connlabel_set(struct nf_conn *ct, u16 bit) +{ + struct nf_conn_labels *labels = nf_ct_labels_find(ct); + + if (!labels || bit >= label_bits(labels)) + return -ENOSPC; + + if (test_bit(bit, labels->bits)) + return 0; + + if (test_and_set_bit(bit, labels->bits)) + return 0; + + return 0; +} +EXPORT_SYMBOL_GPL(nf_connlabel_set); + +static struct nf_ct_ext_type labels_extend __read_mostly = { + .len = sizeof(struct nf_conn_labels), + .align = __alignof__(struct nf_conn_labels), + .id = NF_CT_EXT_LABELS, +}; + +int nf_conntrack_labels_init(struct net *net) +{ + if (net_eq(net, &init_net)) + return nf_ct_extend_register(&labels_extend); + return 0; +} + +void nf_conntrack_labels_fini(struct net *net) +{ + if (net_eq(net, &init_net)) + nf_ct_extend_unregister(&labels_extend); +} diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 627b0e5..e0b10ee 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -43,6 +43,7 @@ #include #include #include +#include #ifdef CONFIG_NF_NAT_NEEDED #include #include @@ -1598,6 +1599,8 @@ ctnetlink_create_conntrack(struct net *net, u16 zone, nf_ct_acct_ext_add(ct, GFP_ATOMIC); nf_ct_tstamp_ext_add(ct, GFP_ATOMIC); nf_ct_ecache_ext_add(ct, 0, 0, GFP_ATOMIC); + nf_ct_labels_ext_add(ct); + /* we must add conntrack extensions before confirmation. */ ct->status |= IPS_CONFIRMED; diff --git a/net/netfilter/xt_connlabel.c b/net/netfilter/xt_connlabel.c new file mode 100644 index 0000000..9f8719d --- /dev/null +++ b/net/netfilter/xt_connlabel.c @@ -0,0 +1,99 @@ +/* + * (C) 2013 Astaro GmbH & Co KG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Florian Westphal "); +MODULE_DESCRIPTION("Xtables: add/match connection trackling labels"); +MODULE_ALIAS("ipt_connlabel"); +MODULE_ALIAS("ip6t_connlabel"); + +static bool +connlabel_mt(const struct sk_buff *skb, struct xt_action_param *par) +{ + const struct xt_connlabel_mtinfo *info = par->matchinfo; + enum ip_conntrack_info ctinfo; + struct nf_conn *ct; + bool invert = info->options & XT_CONNLABEL_OP_INVERT; + + ct = nf_ct_get(skb, &ctinfo); + if (ct == NULL || nf_ct_is_untracked(ct)) + return invert; + + if (info->options & XT_CONNLABEL_OP_SET) + return (nf_connlabel_set(ct, info->bit) == 0) ^ invert; + + return nf_connlabel_match(ct, info->bit) ^ invert; +} + +static int connlabel_mt_check(const struct xt_mtchk_param *par) +{ + const int options = XT_CONNLABEL_OP_INVERT | + XT_CONNLABEL_OP_SET; + struct xt_connlabel_mtinfo *info = par->matchinfo; + int ret; + size_t words; + + if (info->bit > XT_CONNLABEL_MAXBIT) + return -ERANGE; + + if (info->options & ~options) { + pr_err("Unknown options in mask %x\n", info->options); + return -EINVAL; + } + + ret = nf_ct_l3proto_try_module_get(par->family); + if (ret < 0) { + pr_info("cannot load conntrack support for proto=%u\n", + par->family); + return ret; + } + + par->net->ct.labels_used++; + words = BITS_TO_LONGS(info->bit+1); + if (words > par->net->ct.label_words) + par->net->ct.label_words = words; + + return ret; +} + +static void connlabel_mt_destroy(const struct xt_mtdtor_param *par) +{ + par->net->ct.labels_used--; + if (par->net->ct.labels_used == 0) + par->net->ct.label_words = 0; + nf_ct_l3proto_module_put(par->family); +} + +static struct xt_match connlabels_mt_reg __read_mostly = { + .name = "connlabel", + .family = NFPROTO_UNSPEC, + .checkentry = connlabel_mt_check, + .match = connlabel_mt, + .matchsize = sizeof(struct xt_connlabel_mtinfo), + .destroy = connlabel_mt_destroy, + .me = THIS_MODULE, +}; + +static int __init connlabel_mt_init(void) +{ + return xt_register_match(&connlabels_mt_reg); +} + +static void __exit connlabel_mt_exit(void) +{ + xt_unregister_match(&connlabels_mt_reg); +} + +module_init(connlabel_mt_init); +module_exit(connlabel_mt_exit); -- cgit v0.10.2 From 0ceabd83875b72a29f33db4ab703d6ba40ea4c58 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 11 Jan 2013 06:30:45 +0000 Subject: netfilter: ctnetlink: deliver labels to userspace Introduce CTA_LABELS attribute to send a bit-vector of currently active labels to userspace. Future patch will permit userspace to also set/delete active labels. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index 1644cdd..d69483f 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -101,6 +101,7 @@ enum ip_conntrack_events { IPCT_MARK, /* new mark has been set */ IPCT_NATSEQADJ, /* NAT is doing sequence adjustment */ IPCT_SECMARK, /* new security mark has been set */ + IPCT_LABEL, /* new connlabel has been set */ }; enum ip_conntrack_expect_events { diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 86e930c..9e71e0c 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -49,6 +49,7 @@ enum ctattr_type { CTA_SECCTX, CTA_TIMESTAMP, CTA_MARK_MASK, + CTA_LABELS, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) diff --git a/net/netfilter/nf_conntrack_labels.c b/net/netfilter/nf_conntrack_labels.c index 0c542f4..ac5d080 100644 --- a/net/netfilter/nf_conntrack_labels.c +++ b/net/netfilter/nf_conntrack_labels.c @@ -46,7 +46,7 @@ int nf_connlabel_set(struct nf_conn *ct, u16 bit) return 0; if (test_and_set_bit(bit, labels->bits)) - return 0; + nf_conntrack_event_cache(IPCT_LABEL, ct); return 0; } diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index e0b10ee..5f53863 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -324,6 +324,40 @@ nla_put_failure: #define ctnetlink_dump_secctx(a, b) (0) #endif +#ifdef CONFIG_NF_CONNTRACK_LABELS +static int ctnetlink_label_size(const struct nf_conn *ct) +{ + struct nf_conn_labels *labels = nf_ct_labels_find(ct); + + if (!labels) + return 0; + return nla_total_size(labels->words * sizeof(long)); +} + +static int +ctnetlink_dump_labels(struct sk_buff *skb, const struct nf_conn *ct) +{ + struct nf_conn_labels *labels = nf_ct_labels_find(ct); + unsigned int len, i; + + if (!labels) + return 0; + + len = labels->words * sizeof(long); + i = 0; + do { + if (labels->bits[i] != 0) + return nla_put(skb, CTA_LABELS, len, labels->bits); + i++; + } while (i < labels->words); + + return 0; +} +#else +#define ctnetlink_dump_labels(a, b) (0) +#define ctnetlink_label_size(a) (0) +#endif + #define master_tuple(ct) &(ct->master->tuplehash[IP_CT_DIR_ORIGINAL].tuple) static inline int @@ -464,6 +498,7 @@ ctnetlink_fill_info(struct sk_buff *skb, u32 portid, u32 seq, u32 type, ctnetlink_dump_helpinfo(skb, ct) < 0 || ctnetlink_dump_mark(skb, ct) < 0 || ctnetlink_dump_secctx(skb, ct) < 0 || + ctnetlink_dump_labels(skb, ct) < 0 || ctnetlink_dump_id(skb, ct) < 0 || ctnetlink_dump_use(skb, ct) < 0 || ctnetlink_dump_master(skb, ct) < 0 || @@ -562,6 +597,7 @@ ctnetlink_nlmsg_size(const struct nf_conn *ct) + nla_total_size(sizeof(u_int32_t)) /* CTA_MARK */ #endif + ctnetlink_proto_size(ct) + + ctnetlink_label_size(ct) ; } @@ -663,6 +699,9 @@ ctnetlink_conntrack_event(unsigned int events, struct nf_ct_event *item) && ctnetlink_dump_secctx(skb, ct) < 0) goto nla_put_failure; #endif + if (events & (1 << IPCT_LABEL) && + ctnetlink_dump_labels(skb, ct) < 0) + goto nla_put_failure; if (events & (1 << IPCT_RELATED) && ctnetlink_dump_master(skb, ct) < 0) @@ -1986,6 +2025,8 @@ ctnetlink_nfqueue_build(struct sk_buff *skb, struct nf_conn *ct) if (ct->mark && ctnetlink_dump_mark(skb, ct) < 0) goto nla_put_failure; #endif + if (ctnetlink_dump_labels(skb, ct) < 0) + goto nla_put_failure; rcu_read_unlock(); return 0; -- cgit v0.10.2 From 9b21f6a90924dfe8e5e686c314ddb441fb06501e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 11 Jan 2013 06:30:46 +0000 Subject: netfilter: ctnetlink: allow userspace to modify labels Add the ability to set/clear labels assigned to a conntrack via ctnetlink. To allow userspace to only alter specific bits, Pablo suggested to add a new CTA_LABELS_MASK attribute: The new set of active labels is then determined via active = (active & ~mask) ^ changeset i.e., the mask selects those bits in the existing set that should be changed. This follows the same method already used by MARK and CONNMARK targets. Omitting CTA_LABELS_MASK is the same as setting all bits in CTA_LABELS_MASK to 1: The existing set is replaced by the one from userspace. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_labels.h b/include/net/netfilter/nf_conntrack_labels.h index b94fe31..a3ce5d0 100644 --- a/include/net/netfilter/nf_conntrack_labels.h +++ b/include/net/netfilter/nf_conntrack_labels.h @@ -46,6 +46,9 @@ static inline struct nf_conn_labels *nf_ct_labels_ext_add(struct nf_conn *ct) bool nf_connlabel_match(const struct nf_conn *ct, u16 bit); int nf_connlabel_set(struct nf_conn *ct, u16 bit); +int nf_connlabels_replace(struct nf_conn *ct, + const u32 *data, const u32 *mask, unsigned int words); + #ifdef CONFIG_NF_CONNTRACK_LABELS int nf_conntrack_labels_init(struct net *net); void nf_conntrack_labels_fini(struct net *net); diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 9e71e0c..08fabc6 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -50,6 +50,7 @@ enum ctattr_type { CTA_TIMESTAMP, CTA_MARK_MASK, CTA_LABELS, + CTA_LABELS_MASK, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) diff --git a/net/netfilter/nf_conntrack_labels.c b/net/netfilter/nf_conntrack_labels.c index ac5d080..e1d1eb8 100644 --- a/net/netfilter/nf_conntrack_labels.c +++ b/net/netfilter/nf_conntrack_labels.c @@ -52,6 +52,49 @@ int nf_connlabel_set(struct nf_conn *ct, u16 bit) } EXPORT_SYMBOL_GPL(nf_connlabel_set); +#if IS_ENABLED(CONFIG_NF_CT_NETLINK) +static void replace_u32(u32 *address, u32 mask, u32 new) +{ + u32 old, tmp; + + do { + old = *address; + tmp = (old & mask) ^ new; + } while (cmpxchg(address, old, tmp) != old); +} + +int nf_connlabels_replace(struct nf_conn *ct, + const u32 *data, + const u32 *mask, unsigned int words32) +{ + struct nf_conn_labels *labels; + unsigned int size, i; + u32 *dst; + + labels = nf_ct_labels_find(ct); + if (!labels) + return -ENOSPC; + + size = labels->words * sizeof(long); + if (size < (words32 * sizeof(u32))) + words32 = size / sizeof(u32); + + dst = (u32 *) labels->bits; + if (words32) { + for (i = 0; i < words32; i++) + replace_u32(&dst[i], mask ? ~mask[i] : 0, data[i]); + } + + size /= sizeof(u32); + for (i = words32; i < size; i++) /* pad */ + replace_u32(&dst[i], 0, 0); + + nf_conntrack_event_cache(IPCT_LABEL, ct); + return 0; +} +EXPORT_SYMBOL_GPL(nf_connlabels_replace); +#endif + static struct nf_ct_ext_type labels_extend __read_mostly = { .len = sizeof(struct nf_conn_labels), .align = __alignof__(struct nf_conn_labels), diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 5f53863..2334cc5 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -961,6 +961,7 @@ ctnetlink_parse_help(const struct nlattr *attr, char **helper_name, return 0; } +#define __CTA_LABELS_MAX_LENGTH ((XT_CONNLABEL_MAXBIT + 1) / BITS_PER_BYTE) static const struct nla_policy ct_nla_policy[CTA_MAX+1] = { [CTA_TUPLE_ORIG] = { .type = NLA_NESTED }, [CTA_TUPLE_REPLY] = { .type = NLA_NESTED }, @@ -977,6 +978,10 @@ static const struct nla_policy ct_nla_policy[CTA_MAX+1] = { [CTA_NAT_SEQ_ADJ_REPLY] = { .type = NLA_NESTED }, [CTA_ZONE] = { .type = NLA_U16 }, [CTA_MARK_MASK] = { .type = NLA_U32 }, + [CTA_LABELS] = { .type = NLA_BINARY, + .len = __CTA_LABELS_MAX_LENGTH }, + [CTA_LABELS_MASK] = { .type = NLA_BINARY, + .len = __CTA_LABELS_MAX_LENGTH }, }; static int @@ -1505,6 +1510,31 @@ ctnetlink_change_nat_seq_adj(struct nf_conn *ct, #endif static int +ctnetlink_attach_labels(struct nf_conn *ct, const struct nlattr * const cda[]) +{ +#ifdef CONFIG_NF_CONNTRACK_LABELS + size_t len = nla_len(cda[CTA_LABELS]); + const void *mask = cda[CTA_LABELS_MASK]; + + if (len & (sizeof(u32)-1)) /* must be multiple of u32 */ + return -EINVAL; + + if (mask) { + if (nla_len(cda[CTA_LABELS_MASK]) == 0 || + nla_len(cda[CTA_LABELS_MASK]) != len) + return -EINVAL; + mask = nla_data(cda[CTA_LABELS_MASK]); + } + + len /= sizeof(u32); + + return nf_connlabels_replace(ct, nla_data(cda[CTA_LABELS]), mask, len); +#else + return -EOPNOTSUPP; +#endif +} + +static int ctnetlink_change_conntrack(struct nf_conn *ct, const struct nlattr * const cda[]) { @@ -1550,6 +1580,11 @@ ctnetlink_change_conntrack(struct nf_conn *ct, return err; } #endif + if (cda[CTA_LABELS]) { + err = ctnetlink_attach_labels(ct, cda); + if (err < 0) + return err; + } return 0; } @@ -1758,6 +1793,10 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, else events = IPCT_NEW; + if (cda[CTA_LABELS] && + ctnetlink_attach_labels(ct, cda) == 0) + events |= (1 << IPCT_LABEL); + nf_conntrack_eventmask_report((1 << IPCT_REPLY) | (1 << IPCT_ASSURED) | (1 << IPCT_HELPER) | @@ -2055,6 +2094,11 @@ ctnetlink_nfqueue_parse_ct(const struct nlattr *cda[], struct nf_conn *ct) if (err < 0) return err; } + if (cda[CTA_LABELS]) { + err = ctnetlink_attach_labels(ct, cda); + if (err < 0) + return err; + } #if defined(CONFIG_NF_CONNTRACK_MARK) if (cda[CTA_MARK]) ct->mark = ntohl(nla_get_be32(cda[CTA_MARK])); -- cgit v0.10.2 From 5a406b0cdfa948c7d949b270374737b17ee1679f Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 28 Dec 2012 18:17:08 +0000 Subject: netfilter: nf_ct_snmp: add include file Prototype for nf_nat_snmp_hook is in nf_conntrack_snmp.h therefore it should be included to get type checking. Found by sparse. Signed-off-by: Stephen Hemminger Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_snmp.c b/net/netfilter/nf_conntrack_snmp.c index 6e545e2..87b95a2 100644 --- a/net/netfilter/nf_conntrack_snmp.c +++ b/net/netfilter/nf_conntrack_snmp.c @@ -16,6 +16,7 @@ #include #include #include +#include #define SNMP_PORT 161 -- cgit v0.10.2 From 7ff74a596b6aa47ccc71f6b9a26006af69d0e33f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:02 +0000 Subject: ndisc: Update neigh->updated with write lock. neigh->nud_state and neigh->updated are under protection of neigh->lock. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 7c34c01..1341f68 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -499,22 +499,26 @@ static void rt6_probe(struct rt6_info *rt) * to no more than one per minute. */ neigh = rt ? rt->n : NULL; - if (!neigh || (neigh->nud_state & NUD_VALID)) + if (!neigh) + return; + write_lock_bh(&neigh->lock); + if (neigh->nud_state & NUD_VALID) { + write_unlock_bh(&neigh->lock); return; - read_lock_bh(&neigh->lock); + } if (!(neigh->nud_state & NUD_VALID) && time_after(jiffies, neigh->updated + rt->rt6i_idev->cnf.rtr_probe_interval)) { struct in6_addr mcaddr; struct in6_addr *target; neigh->updated = jiffies; - read_unlock_bh(&neigh->lock); + write_unlock_bh(&neigh->lock); target = (struct in6_addr *)&neigh->primary_key; addrconf_addr_solict_mult(target, &mcaddr); ndisc_send_ns(rt->dst.dev, NULL, target, &mcaddr, NULL); } else { - read_unlock_bh(&neigh->lock); + write_unlock_bh(&neigh->lock); } } #else -- cgit v0.10.2 From 8e022ee63f344e0dd12e60f5cdbacabcd312c4c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:09 +0000 Subject: ndisc: Remove tbl argument for __ipv6_neigh_lookup(). We can refer to nd_tbl directly. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ndisc.h b/include/net/ndisc.h index 23b3a7c..bbc938e 100644 --- a/include/net/ndisc.h +++ b/include/net/ndisc.h @@ -148,7 +148,7 @@ static inline u32 ndisc_hashfn(const void *pkey, const struct net_device *dev, _ (p32[3] * hash_rnd[3])); } -static inline struct neighbour *__ipv6_neigh_lookup(struct neigh_table *tbl, struct net_device *dev, const void *pkey) +static inline struct neighbour *__ipv6_neigh_lookup(struct net_device *dev, const void *pkey) { struct neigh_hash_table *nht; const u32 *p32 = pkey; @@ -156,7 +156,7 @@ static inline struct neighbour *__ipv6_neigh_lookup(struct neigh_table *tbl, str u32 hash_val; rcu_read_lock_bh(); - nht = rcu_dereference_bh(tbl->nht); + nht = rcu_dereference_bh(nd_tbl.nht); hash_val = ndisc_hashfn(pkey, dev, nht->hash_rnd) >> (32 - nht->hash_shift); for (n = rcu_dereference_bh(nht->hash_buckets[hash_val]); n != NULL; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 1341f68..5d9ca27 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -145,7 +145,7 @@ static struct neighbour *ip6_neigh_lookup(const struct dst_entry *dst, struct neighbour *n; daddr = choose_neigh_daddr(rt, skb, daddr); - n = __ipv6_neigh_lookup(&nd_tbl, dst->dev, daddr); + n = __ipv6_neigh_lookup(dst->dev, daddr); if (n) return n; return neigh_create(&nd_tbl, daddr, dst->dev); @@ -153,7 +153,7 @@ static struct neighbour *ip6_neigh_lookup(const struct dst_entry *dst, static int rt6_bind_neighbour(struct rt6_info *rt, struct net_device *dev) { - struct neighbour *n = __ipv6_neigh_lookup(&nd_tbl, dev, &rt->rt6i_gateway); + struct neighbour *n = __ipv6_neigh_lookup(dev, &rt->rt6i_gateway); if (!n) { n = neigh_create(&nd_tbl, &rt->rt6i_gateway, dev); if (IS_ERR(n)) -- cgit v0.10.2 From dd0cbf29b12bf876abf2880bcc0db8983537b87a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:15 +0000 Subject: ipv6 route: Dump gateway based on RTF_GATEWAY flag and rt->rt6i_gateway. Do not depend on rt->n. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 5d9ca27..d82eb1f 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2484,7 +2484,6 @@ static int rt6_fill_node(struct net *net, struct nlmsghdr *nlh; long expires; u32 table; - struct neighbour *n; if (prefix) { /* user wants prefix routes only */ if (!(rt->rt6i_flags & RTF_PREFIX_RT)) { @@ -2597,9 +2596,8 @@ static int rt6_fill_node(struct net *net, if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0) goto nla_put_failure; - n = rt->n; - if (n) { - if (nla_put(skb, RTA_GATEWAY, 16, &n->primary_key) < 0) + if (rt->rt6i_flags & RTF_GATEWAY) { + if (nla_put(skb, RTA_GATEWAY, 16, &rt->rt6i_gateway) < 0) goto nla_put_failure; } @@ -2794,7 +2792,6 @@ struct rt6_proc_arg static int rt6_info_route(struct rt6_info *rt, void *p_arg) { struct seq_file *m = p_arg; - struct neighbour *n; seq_printf(m, "%pi6 %02x ", &rt->rt6i_dst.addr, rt->rt6i_dst.plen); @@ -2803,9 +2800,8 @@ static int rt6_info_route(struct rt6_info *rt, void *p_arg) #else seq_puts(m, "00000000000000000000000000000000 00 "); #endif - n = rt->n; - if (n) { - seq_printf(m, "%pi6", n->primary_key); + if (rt->rt6i_flags & RTF_GATEWAY) { + seq_printf(m, "%pi6", &rt->rt6i_gateway); } else { seq_puts(m, "00000000000000000000000000000000"); } -- cgit v0.10.2 From ac3175fe7a5788d40b067b76c27f2943cd0be2d7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:22 +0000 Subject: ndisc: Introduce __ipv6_neigh_lookup_noref(). This function, which looks up neighbour entry for an IPv6 address without touching refcnt, will be used for patches to remove dependency on rt->n (neighbour entry in rt6_info). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ndisc.h b/include/net/ndisc.h index bbc938e..ec48f42 100644 --- a/include/net/ndisc.h +++ b/include/net/ndisc.h @@ -148,14 +148,13 @@ static inline u32 ndisc_hashfn(const void *pkey, const struct net_device *dev, _ (p32[3] * hash_rnd[3])); } -static inline struct neighbour *__ipv6_neigh_lookup(struct net_device *dev, const void *pkey) +static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) { struct neigh_hash_table *nht; const u32 *p32 = pkey; struct neighbour *n; u32 hash_val; - rcu_read_lock_bh(); nht = rcu_dereference_bh(nd_tbl.nht); hash_val = ndisc_hashfn(pkey, dev, nht->hash_rnd) >> (32 - nht->hash_shift); for (n = rcu_dereference_bh(nht->hash_buckets[hash_val]); @@ -164,12 +163,21 @@ static inline struct neighbour *__ipv6_neigh_lookup(struct net_device *dev, cons u32 *n32 = (u32 *) n->primary_key; if (n->dev == dev && ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | - (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0) { - if (!atomic_inc_not_zero(&n->refcnt)) - n = NULL; - break; - } + (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0) + return n; } + + return NULL; +} + +static inline struct neighbour *__ipv6_neigh_lookup(struct net_device *dev, const void *pkey) +{ + struct neighbour *n; + + rcu_read_lock_bh(); + n = __ipv6_neigh_lookup_noref(dev, pkey); + if (n && !atomic_inc_not_zero(&n->refcnt)) + n = NULL; rcu_read_unlock_bh(); return n; -- cgit v0.10.2 From c440f1609b6516029ac5286e00fb86b3a11acd8e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:32 +0000 Subject: ipv6: Do not depend on rt->n in ip6_pol_route(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d82eb1f..2839381 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -925,7 +925,7 @@ restart: dst_hold(&rt->dst); read_unlock_bh(&table->tb6_lock); - if (!rt->n && !(rt->rt6i_flags & RTF_NONEXTHOP)) + if (!(rt->rt6i_flags & (RTF_NONEXTHOP | RTF_GATEWAY))) nrt = rt6_alloc_cow(rt, &fl6->daddr, &fl6->saddr); else if (!(rt->dst.flags & DST_HOST)) nrt = rt6_alloc_clone(rt, &fl6->daddr); -- cgit v0.10.2 From 145a36217adf91cdc6922c5b9cc985b87f8e0c73 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:38 +0000 Subject: ipv6: Do not depend on rt->n in rt6_check_neigh(). CC: Cong Wang Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 2839381..c7bcd77 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -546,20 +546,24 @@ static inline bool rt6_check_neigh(struct rt6_info *rt) struct neighbour *neigh; bool ret = false; - neigh = rt->n; if (rt->rt6i_flags & RTF_NONEXTHOP || !(rt->rt6i_flags & RTF_GATEWAY)) - ret = true; - else if (neigh) { - read_lock_bh(&neigh->lock); + return true; + + rcu_read_lock_bh(); + neigh = __ipv6_neigh_lookup_noref(rt->dst.dev, &rt->rt6i_gateway); + if (neigh) { + read_lock(&neigh->lock); if (neigh->nud_state & NUD_VALID) ret = true; #ifdef CONFIG_IPV6_ROUTER_PREF else if (!(neigh->nud_state & NUD_FAILED)) ret = true; #endif - read_unlock_bh(&neigh->lock); + read_unlock(&neigh->lock); } + rcu_read_unlock_bh(); + return ret; } -- cgit v0.10.2 From 2152caea719657579daa3a1a57a5425a3db6d612 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:43 +0000 Subject: ipv6: Do not depend on rt->n in rt6_probe(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c7bcd77..afc8386 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -498,28 +498,34 @@ static void rt6_probe(struct rt6_info *rt) * Router Reachability Probe MUST be rate-limited * to no more than one per minute. */ - neigh = rt ? rt->n : NULL; - if (!neigh) - return; - write_lock_bh(&neigh->lock); - if (neigh->nud_state & NUD_VALID) { - write_unlock_bh(&neigh->lock); + if (!rt || !(rt->rt6i_flags & RTF_GATEWAY)) return; + rcu_read_lock_bh(); + neigh = __ipv6_neigh_lookup_noref(rt->dst.dev, &rt->rt6i_gateway); + if (neigh) { + write_lock(&neigh->lock); + if (neigh->nud_state & NUD_VALID) + goto out; } - if (!(neigh->nud_state & NUD_VALID) && + + if (!neigh || time_after(jiffies, neigh->updated + rt->rt6i_idev->cnf.rtr_probe_interval)) { struct in6_addr mcaddr; struct in6_addr *target; neigh->updated = jiffies; - write_unlock_bh(&neigh->lock); - target = (struct in6_addr *)&neigh->primary_key; + if (neigh) + write_unlock(&neigh->lock); + + target = (struct in6_addr *)&rt->rt6i_gateway; addrconf_addr_solict_mult(target, &mcaddr); ndisc_send_ns(rt->dst.dev, NULL, target, &mcaddr, NULL); } else { - write_unlock_bh(&neigh->lock); +out: + write_unlock(&neigh->lock); } + rcu_read_unlock_bh(); } #else static inline void rt6_probe(struct rt6_info *rt) -- cgit v0.10.2 From 9bb5a14813f502b867a45075c88bc1f2b78381df Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:48 +0000 Subject: ipv6: Introduce rt6_nexthop() to select nexthop address. For RTF_GATEWAY route, return rt->rt6i_gateway. Otherwise, return 2nd argument (destination address). This will be used by following patches which remove rt->n dependency patches in ip6_dst_lookup_tail() and ip6_finish_output2(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 27d8318..30cbb15 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -23,6 +23,7 @@ struct route_info { #include #include #include +#include #define RT6_LOOKUP_F_IFACE 0x00000001 #define RT6_LOOKUP_F_REACHABLE 0x00000002 @@ -194,4 +195,11 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb) skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb)); } +static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt, struct in6_addr *dest) +{ + if (rt->rt6i_flags & RTF_GATEWAY) + return &rt->rt6i_gateway; + return dest; +} + #endif -- cgit v0.10.2 From 707be1ff3d9309f810e33790e6ae3f15e7ac967e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:53:55 +0000 Subject: ipv6: Do not depend on rt->n in ip6_dst_lookup_tail(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 9250c69..7c00edb 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -913,8 +913,12 @@ static int ip6_dst_lookup_tail(struct sock *sk, * dst entry of the nexthop router */ rt = (struct rt6_info *) *dst; - n = rt->n; - if (n && !(n->nud_state & NUD_VALID)) { + rcu_read_lock_bh(); + n = __ipv6_neigh_lookup_noref(rt->dst.dev, rt6_nexthop(rt, &fl6->daddr)); + err = n && !(n->nud_state & NUD_VALID) ? -EINVAL : 0; + rcu_read_unlock_bh(); + + if (err) { struct inet6_ifaddr *ifp; struct flowi6 fl_gw6; int redirect; -- cgit v0.10.2 From 6fd6ce2056de27090f4723138e0ce0a816f4ba0d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:54:00 +0000 Subject: ipv6: Do not depend on rt->n in ip6_finish_output2(). If neigh is not found, create new one. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 7c00edb..b0895f5 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -88,7 +88,8 @@ static int ip6_finish_output2(struct sk_buff *skb) struct dst_entry *dst = skb_dst(skb); struct net_device *dev = dst->dev; struct neighbour *neigh; - struct rt6_info *rt; + struct in6_addr *nexthop; + int ret; skb->protocol = htons(ETH_P_IPV6); skb->dev = dev; @@ -123,10 +124,17 @@ static int ip6_finish_output2(struct sk_buff *skb) skb->len); } - rt = (struct rt6_info *) dst; - neigh = rt->n; - if (neigh) - return dst_neigh_output(dst, neigh, skb); + rcu_read_lock_bh(); + nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr); + neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop); + if (unlikely(!neigh)) + neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false); + if (!IS_ERR(neigh)) { + ret = dst_neigh_output(dst, neigh, skb); + rcu_read_unlock_bh(); + return ret; + } + rcu_read_unlock_bh(); IP6_INC_STATS_BH(dev_net(dst->dev), ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES); -- cgit v0.10.2 From 887c95cc1da53f66a5890fdeab13414613010097 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 17 Jan 2013 12:54:05 +0000 Subject: ipv6: Complete neighbour entry removal from dst_entry. CC: Cong Wang Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index fdc48a9..6919a50 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -89,8 +89,6 @@ struct fib6_table; struct rt6_info { struct dst_entry dst; - struct neighbour *n; - /* * Tail elements of dst_entry (__refcnt etc.) * and these elements (rarely used in hot path) are in diff --git a/net/ipv6/route.c b/net/ipv6/route.c index afc8386..3a562a1 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -151,19 +151,6 @@ static struct neighbour *ip6_neigh_lookup(const struct dst_entry *dst, return neigh_create(&nd_tbl, daddr, dst->dev); } -static int rt6_bind_neighbour(struct rt6_info *rt, struct net_device *dev) -{ - struct neighbour *n = __ipv6_neigh_lookup(dev, &rt->rt6i_gateway); - if (!n) { - n = neigh_create(&nd_tbl, &rt->rt6i_gateway, dev); - if (IS_ERR(n)) - return PTR_ERR(n); - } - rt->n = n; - - return 0; -} - static struct dst_ops ip6_dst_ops_template = { .family = AF_INET6, .protocol = cpu_to_be16(ETH_P_IPV6), @@ -301,9 +288,6 @@ static void ip6_dst_destroy(struct dst_entry *dst) struct rt6_info *rt = (struct rt6_info *)dst; struct inet6_dev *idev = rt->rt6i_idev; - if (rt->n) - neigh_release(rt->n); - if (!(rt->dst.flags & DST_HOST)) dst_destroy_metrics_generic(dst); @@ -354,11 +338,6 @@ static void ip6_dst_ifdown(struct dst_entry *dst, struct net_device *dev, in6_dev_put(idev); } } - if (rt->n && rt->n->dev == dev) { - rt->n->dev = loopback_dev; - dev_hold(loopback_dev); - dev_put(dev); - } } } @@ -845,8 +824,6 @@ static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, rt = ip6_rt_copy(ort, daddr); if (rt) { - int attempts = !in_softirq(); - if (!(rt->rt6i_flags & RTF_GATEWAY)) { if (ort->rt6i_dst.plen != 128 && ipv6_addr_equal(&ort->rt6i_dst.addr, daddr)) @@ -862,32 +839,6 @@ static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, rt->rt6i_src.plen = 128; } #endif - - retry: - if (rt6_bind_neighbour(rt, rt->dst.dev)) { - struct net *net = dev_net(rt->dst.dev); - int saved_rt_min_interval = - net->ipv6.sysctl.ip6_rt_gc_min_interval; - int saved_rt_elasticity = - net->ipv6.sysctl.ip6_rt_gc_elasticity; - - if (attempts-- > 0) { - net->ipv6.sysctl.ip6_rt_gc_elasticity = 1; - net->ipv6.sysctl.ip6_rt_gc_min_interval = 0; - - ip6_dst_gc(&net->ipv6.ip6_dst_ops); - - net->ipv6.sysctl.ip6_rt_gc_elasticity = - saved_rt_elasticity; - net->ipv6.sysctl.ip6_rt_gc_min_interval = - saved_rt_min_interval; - goto retry; - } - - net_warn_ratelimited("Neighbour table overflow\n"); - dst_free(&rt->dst); - return NULL; - } } return rt; @@ -898,10 +849,8 @@ static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, { struct rt6_info *rt = ip6_rt_copy(ort, daddr); - if (rt) { + if (rt) rt->rt6i_flags |= RTF_CACHE; - rt->n = neigh_clone(ort->n); - } return rt; } @@ -1272,20 +1221,8 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, goto out; } - if (neigh) - neigh_hold(neigh); - else { - neigh = ip6_neigh_lookup(&rt->dst, NULL, &fl6->daddr); - if (IS_ERR(neigh)) { - in6_dev_put(idev); - dst_free(&rt->dst); - return ERR_CAST(neigh); - } - } - rt->dst.flags |= DST_HOST; rt->dst.output = ip6_output; - rt->n = neigh; atomic_set(&rt->dst.__refcnt, 1); rt->rt6i_dst.addr = fl6->daddr; rt->rt6i_dst.plen = 128; @@ -1594,12 +1531,6 @@ int ip6_route_add(struct fib6_config *cfg) } else rt->rt6i_prefsrc.plen = 0; - if (cfg->fc_flags & (RTF_GATEWAY | RTF_NONEXTHOP)) { - err = rt6_bind_neighbour(rt, dev); - if (err) - goto out; - } - rt->rt6i_flags = cfg->fc_flags; install_route: @@ -1713,7 +1644,6 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu struct netevent_redirect netevent; struct rt6_info *rt, *nrt = NULL; struct ndisc_options ndopts; - struct neighbour *old_neigh; struct inet6_dev *in6_dev; struct neighbour *neigh; struct rd_msg *msg; @@ -1786,11 +1716,6 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu if (!neigh) return; - /* Duplicate redirect: silently ignore. */ - old_neigh = rt->n; - if (neigh == old_neigh) - goto out; - /* * We have finally decided to accept it. */ @@ -1811,7 +1736,6 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu nrt->rt6i_flags &= ~RTF_GATEWAY; nrt->rt6i_gateway = *(struct in6_addr *)neigh->primary_key; - nrt->n = neigh_clone(neigh); if (ip6_ins_rt(nrt)) goto out; @@ -2125,7 +2049,6 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, { struct net *net = dev_net(idev->dev); struct rt6_info *rt = ip6_dst_alloc(net, net->loopback_dev, 0, NULL); - int err; if (!rt) { net_warn_ratelimited("Maximum number of routes reached, consider increasing route/max_size\n"); @@ -2144,11 +2067,6 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, rt->rt6i_flags |= RTF_ANYCAST; else rt->rt6i_flags |= RTF_LOCAL; - err = rt6_bind_neighbour(rt, rt->dst.dev); - if (err) { - dst_free(&rt->dst); - return ERR_PTR(err); - } rt->rt6i_dst.addr = *addr; rt->rt6i_dst.plen = 128; diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index c984413..1282737 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -110,7 +110,6 @@ static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev, /* Sheit... I remember I did this right. Apparently, * it was magically lost, so this code needs audit */ - xdst->u.rt6.n = neigh_clone(rt->n); xdst->u.rt6.rt6i_flags = rt->rt6i_flags & (RTF_ANYCAST | RTF_LOCAL); xdst->u.rt6.rt6i_metric = rt->rt6i_metric; -- cgit v0.10.2 From 6ead1bbc381a674c20f227dbe6f3a8c6f67ce7a2 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 14 Jan 2013 22:33:50 +0200 Subject: Bluetooth: Add a new workqueue for hci_request operations The hci_request function is blocking and cannot be called through the usual per-HCI device workqueue (hdev->workqueue). While hci_request is in progress any other work from the queue, including sending HCI commands to the controller would be blocked and eventually cause the hci_request call to time out. This patch adds a second workqueue to be used by operations needing hci_request and thereby avoiding issues with blocking other workqueue users. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 014a2ea..769a740 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -216,6 +216,7 @@ struct hci_dev { unsigned long le_last_tx; struct workqueue_struct *workqueue; + struct workqueue_struct *req_workqueue; struct work_struct power_on; struct delayed_work power_off; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 596660d..f73907a 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1799,6 +1799,15 @@ int hci_register_dev(struct hci_dev *hdev) goto err; } + hdev->req_workqueue = alloc_workqueue(hdev->name, + WQ_HIGHPRI | WQ_UNBOUND | + WQ_MEM_RECLAIM, 1); + if (!hdev->req_workqueue) { + destroy_workqueue(hdev->workqueue); + error = -ENOMEM; + goto err; + } + error = hci_add_sysfs(hdev); if (error < 0) goto err_wqueue; @@ -1827,6 +1836,7 @@ int hci_register_dev(struct hci_dev *hdev) err_wqueue: destroy_workqueue(hdev->workqueue); + destroy_workqueue(hdev->req_workqueue); err: ida_simple_remove(&hci_index_ida, hdev->id); write_lock(&hci_dev_list_lock); @@ -1880,6 +1890,7 @@ void hci_unregister_dev(struct hci_dev *hdev) hci_del_sysfs(hdev); destroy_workqueue(hdev->workqueue); + destroy_workqueue(hdev->req_workqueue); hci_dev_lock(hdev); hci_blacklist_clear(hdev); -- cgit v0.10.2 From 1920257316615676387794cc5fb838183b3bae7f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 14 Jan 2013 22:33:51 +0200 Subject: Bluetooth: Use req_workqueue for hci_request operations This patch converts work assignment relying on hci_request() from the system-global work queue to the per-HCI device specific work queue (hdev->req_workqueue) intended for hci_request() related tasks. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index f73907a..545553b 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1146,7 +1146,8 @@ static void hci_power_on(struct work_struct *work) return; if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) - schedule_delayed_work(&hdev->power_off, HCI_AUTO_OFF_TIMEOUT); + queue_delayed_work(hdev->req_workqueue, &hdev->power_off, + HCI_AUTO_OFF_TIMEOUT); if (test_and_clear_bit(HCI_SETUP, &hdev->dev_flags)) mgmt_index_added(hdev); @@ -1830,7 +1831,7 @@ int hci_register_dev(struct hci_dev *hdev) hci_notify(hdev, HCI_DEV_REG); hci_dev_hold(hdev); - schedule_work(&hdev->power_on); + queue_work(hdev->req_workqueue, &hdev->power_on); return id; diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 37add53..54114ff 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -812,9 +812,9 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data, } if (cp->val) - schedule_work(&hdev->power_on); + queue_work(hdev->req_workqueue, &hdev->power_on); else - schedule_work(&hdev->power_off.work); + queue_work(hdev->req_workqueue, &hdev->power_off.work); err = 0; -- cgit v0.10.2 From 46818ed514102c8d251d4aff5c99ad3ff6805432 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 14 Jan 2013 22:33:52 +0200 Subject: Bluetooth: Fix using system-global workqueue when not necessary There's a per-HCI device workqueue (hdev->workqueue) that should be used for general per-HCI device work (except hdev->req_workqueue that's for hci_request() related work). This patch fixes places using the system-global work queue and makes them use the hdev->workqueue instead. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 545553b..e061b35 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1622,8 +1622,8 @@ static int hci_do_le_scan(struct hci_dev *hdev, u8 type, u16 interval, if (err < 0) return err; - schedule_delayed_work(&hdev->le_scan_disable, - msecs_to_jiffies(timeout)); + queue_delayed_work(hdev->workqueue, &hdev->le_scan_disable, + msecs_to_jiffies(timeout)); return 0; } diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 54114ff..fc171f2 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1361,7 +1361,8 @@ static bool enable_service_cache(struct hci_dev *hdev) return false; if (!test_and_set_bit(HCI_SERVICE_CACHE, &hdev->dev_flags)) { - schedule_delayed_work(&hdev->service_cache, CACHE_TIMEOUT); + queue_delayed_work(hdev->workqueue, &hdev->service_cache, + CACHE_TIMEOUT); return true; } -- cgit v0.10.2 From de5fad815703b5b24bc4726cd71422929537d259 Mon Sep 17 00:00:00 2001 From: Yoni Divinsky Date: Wed, 30 May 2012 11:36:39 +0300 Subject: mac80211: add op to configure default key id There are hardwares which support offload of data packets for example when auto ARP is enabled the hw will send the ARP response. In such cases if WEP encryption is configured the hw must know the default WEP key in order to encrypt the packets correctly. When hw_accel is enabled and encryption type is set to WEP, the driver should get the default key index from mac80211. Signed-off-by: Yoni Divinsky [cleanups, fixes, documentation] Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3037f49..e0825a9 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1630,6 +1630,10 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is * provided by update_tkip_key only. The trigger that makes mac80211 call this * handler is software decryption with wrap around of iv16. + * + * The set_default_unicast_key() call updates the default WEP key index + * configured to the hardware for WEP encryption type. This is required + * for devices that support offload of data packets (e.g. ARP responses). */ /** @@ -2208,6 +2212,10 @@ enum ieee80211_rate_control_changed { * After rekeying was done it should (for example during resume) notify * userspace of the new replay counter using ieee80211_gtk_rekey_notify(). * + * @set_default_unicast_key: Set the default (unicast) key index, useful for + * WEP when the device sends data packets autonomously, e.g. for ARP + * offloading. The index can be 0-3, or -1 for unsetting it. + * * @hw_scan: Ask the hardware to service the scan request, no need to start * the scan state machine in stack. The scan must honour the channel * configuration done by the regulatory agent in the wiphy's @@ -2539,6 +2547,8 @@ struct ieee80211_ops { void (*set_rekey_data)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_gtk_rekey_data *data); + void (*set_default_unicast_key)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, int idx); int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_scan_request *req); void (*cancel_hw_scan)(struct ieee80211_hw *hw, diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 0c07f94..e6033b0 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -1020,4 +1020,20 @@ static inline void drv_restart_complete(struct ieee80211_local *local) trace_drv_return_void(local); } +static inline void +drv_set_default_unicast_key(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + int key_idx) +{ + check_sdata_in_driver(sdata); + + WARN_ON_ONCE(key_idx < -1 || key_idx > 3); + + trace_drv_set_default_unicast_key(local, sdata, key_idx); + if (local->ops->set_default_unicast_key) + local->ops->set_default_unicast_key(&local->hw, &sdata->vif, + key_idx); + trace_drv_return_void(local); +} + #endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 619c5d6..ef252eb 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -204,8 +204,11 @@ static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, if (idx >= 0 && idx < NUM_DEFAULT_KEYS) key = key_mtx_dereference(sdata->local, sdata->keys[idx]); - if (uni) + if (uni) { rcu_assign_pointer(sdata->default_unicast_key, key); + drv_set_default_unicast_key(sdata->local, sdata, idx); + } + if (multi) rcu_assign_pointer(sdata->default_multicast_key, key); diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 41861b9..9341b93 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1821,6 +1821,29 @@ TRACE_EVENT(stop_queue, ) ); +TRACE_EVENT(drv_set_default_unicast_key, + TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + int key_idx), + + TP_ARGS(local, sdata, key_idx), + + TP_STRUCT__entry( + LOCAL_ENTRY + VIF_ENTRY + __field(int, key_idx) + ), + + TP_fast_assign( + LOCAL_ASSIGN; + VIF_ASSIGN; + __entry->key_idx = key_idx; + ), + + TP_printk(LOCAL_PR_FMT VIF_PR_FMT " key_idx:%d", + LOCAL_PR_ARG, VIF_PR_ARG, __entry->key_idx) +); + #ifdef CONFIG_MAC80211_MESSAGE_TRACING #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg -- cgit v0.10.2 From 203e41514a557b71c4c42b4bb2912b56fa0c2fdc Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 08:40:59 +0000 Subject: e1000e: add ethtool .get_eee/.set_eee Add the ability to query and set Energy Efficient Ethernet parameters via ethtool for applicable devices. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 7326ea2..3041a54 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -383,6 +383,9 @@ #define E1000_KABGTXD_BGSQLBIAS 0x00050000 +/* Low Power IDLE Control */ +#define E1000_LPIC_LPIET_SHIFT 24 /* Low Power Idle Entry Time */ + /* PBA constants */ #define E1000_PBA_8K 0x0008 /* 8KB */ #define E1000_PBA_16K 0x0010 /* 16KB */ @@ -799,6 +802,33 @@ /* BME1000 PHY Specific Control Register */ #define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */ +/* PHY Low Power Idle Control */ +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_100_ENABLE 0x2000 +#define I82579_LPI_CTRL_1000_ENABLE 0x4000 +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 + +/* Extended Management Interface (EMI) Registers */ +#define I82579_EMI_ADDR 0x10 +#define I82579_EMI_DATA 0x11 +#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ +#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ +#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ +#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ +#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ +#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ +#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ +#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ +#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ +#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ +#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ +#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ + +#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ +#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ #define PHY_PAGE_SHIFT 5 #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 3f8bbc3..b89b181 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -659,6 +659,7 @@ extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); extern bool e1000_check_phy_82574(struct e1000_hw *hw); +extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 2225603..636ba09 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "e1000.h" @@ -2050,6 +2051,137 @@ static int e1000_get_rxnfc(struct net_device *netdev, } } +static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl; + u32 status, ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + switch (hw->phy.type) { + case e1000_phy_82579: + cap_addr = I82579_EEE_CAPABILITY; + adv_addr = I82579_EEE_ADVERTISEMENT; + lpa_addr = I82579_EEE_LP_ABILITY; + pcs_stat_addr = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + cap_addr = I217_EEE_CAPABILITY; + adv_addr = I217_EEE_ADVERTISEMENT; + lpa_addr = I217_EEE_LP_ABILITY; + pcs_stat_addr = I217_EEE_PCS_STATUS; + break; + default: + return -EOPNOTSUPP; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return -EBUSY; + + /* EEE Capability */ + ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); + if (ret_val) + goto release; + edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data); + + /* EEE Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data); + if (ret_val) + goto release; + edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE Link Partner Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data); + if (ret_val) + goto release; + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE PCS Status */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data); + if (hw->phy.type == e1000_phy_82579) + phy_data <<= 8; + +release: + hw->phy.ops.release(hw); + if (ret_val) + return -ENODATA; + + e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl); + status = er32(STATUS); + + /* Result of the EEE auto negotiation - there is no register that + * has the status of the EEE negotiation so do a best-guess based + * on whether both Tx and Rx LPI indications have been received or + * base it on the link speed, the EEE advertised speeds on both ends + * and the speeds on which EEE is enabled locally. + */ + if (((phy_data & E1000_EEE_TX_LPI_RCVD) && + (phy_data & E1000_EEE_RX_LPI_RCVD)) || + ((status & E1000_STATUS_SPEED_100) && + (edata->advertised & ADVERTISED_100baseT_Full) && + (edata->lp_advertised & ADVERTISED_100baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) || + ((status & E1000_STATUS_SPEED_1000) && + (edata->advertised & ADVERTISED_1000baseT_Full) && + (edata->lp_advertised & ADVERTISED_1000baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE))) + edata->eee_active = true; + + edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable; + edata->tx_lpi_enabled = true; + edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT; + + return 0; +} + +static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct ethtool_eee eee_curr; + s32 ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + ret_val = e1000e_get_eee(netdev, &eee_curr); + if (ret_val) + return ret_val; + + if (eee_curr.advertised != edata->advertised) { + e_err("Setting EEE advertisement is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { + e_err("Setting EEE tx-lpi is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) { + e_err("Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) { + hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + + /* reset the link */ + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + } + + return 0; +} + static const struct ethtool_ops e1000_ethtool_ops = { .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, @@ -2078,6 +2210,8 @@ static const struct ethtool_ops e1000_ethtool_ops = { .set_coalesce = e1000_set_coalesce, .get_rxnfc = e1000_get_rxnfc, .get_ts_info = ethtool_op_get_ts_info, + .get_eee = e1000e_get_eee, + .set_eee = e1000e_set_eee, }; void e1000e_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 06239fe..81afad5 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -62,6 +62,7 @@ enum e1e_registers { E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */ #define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2)) + E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */ E1000_RCTL = 0x00100, /* Rx Control - RW */ E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */ E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 051dfda..3829f7f 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -148,28 +148,6 @@ #define HV_PM_CTRL PHY_REG(770, 17) #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_100_ENABLE 0x2000 -#define I82579_LPI_CTRL_1000_ENABLE 0x4000 -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 -#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 - -/* Extended Management Interface (EMI) Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ -#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ -#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ -#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ -#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ -#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ -#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ -#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ -#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ - /* Intel Rapid Start Technology Support */ #define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) #define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 @@ -829,7 +807,7 @@ static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, * * Assumes the SW/FW/HW Semaphore is already acquired. **/ -static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) { return __e1000_access_emi_reg_locked(hw, addr, data, true); } -- cgit v0.10.2 From ffe0b2ff17e1d59d33334767e07e8141de4bd5c8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Dec 2012 06:40:07 +0000 Subject: e1000e: Use standard #defines for PCIe Capability ASPM fields Use the standard #defines for PCIe Capability ASPM fields. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by: Bjorn Helgaas CC: e1000-devel@lists.sourceforge.net Acked-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 05538e6..bf2c84cf 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5548,14 +5548,21 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) #else static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { + u16 aspm_ctl = 0; + + if (state & PCIE_LINK_STATE_L0S) + aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S; + if (state & PCIE_LINK_STATE_L1) + aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1; + /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ - pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state); + pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl); if (pdev->bus->self) pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL, - state); + aspm_ctl); } #endif static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -- cgit v0.10.2 From b67e191307a3f330525265af3e2877a74d557cbf Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 27 Dec 2012 08:32:33 +0000 Subject: e1000e: add support for hardware timestamping on some devices On 82574, 82583, 82579, I217 and I218 add support for hardware time stamping of all or no Rx packets and Tx packets which have the SKBTX_HW_TSTAMP flag set. Update the .get_ts_info ethtool operation to report the supported time stamping modes, and enable and disable hardware time stamping with the SIOCSHWTSTAMP ioctl. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c77d010..587890d 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -2044,6 +2044,7 @@ const struct e1000_info e1000_82574_info = { | FLAG_HAS_MSIX | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_APME_IN_CTRL3 | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT @@ -2065,6 +2066,7 @@ const struct e1000_info e1000_82583_info = { .mac = e1000_82583, .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_APME_IN_CTRL3 | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 3041a54..36f9fad 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -107,6 +107,7 @@ #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ #define E1000_RXDEXT_STATERR_CE 0x01000000 #define E1000_RXDEXT_STATERR_SE 0x02000000 #define E1000_RXDEXT_STATERR_SEQ 0x04000000 @@ -318,6 +319,7 @@ #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ /* Transmit Control */ #define E1000_TCTL_EN 0x00000002 /* enable Tx */ @@ -536,6 +538,18 @@ #define E1000_RXCW_C 0x20000000 /* Receive config */ #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ +#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ + +#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ +#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ + +#define E1000_TIMINCA_INCPERIOD_SHIFT 24 +#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF + /* PCI Express Control */ #define E1000_GCR_RXD_NO_SNOOP 0x00000001 #define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index b89b181..dea9e55 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -41,6 +41,8 @@ #include #include #include +#include +#include #include "hw.h" @@ -353,6 +355,7 @@ struct e1000_adapter { u64 gorc_old; u32 alloc_rx_buff_failed; u32 rx_dma_failed; + u32 rx_hwtstamp_cleared; unsigned int rx_ps_pages; u16 rx_ps_bsize0; @@ -402,6 +405,14 @@ struct e1000_adapter { u16 tx_ring_count; u16 rx_ring_count; + + struct hwtstamp_config hwtstamp_config; + struct delayed_work systim_overflow_work; + struct sk_buff *tx_hwtstamp_skb; + struct work_struct tx_hwtstamp_work; + spinlock_t systim_lock; /* protects SYSTIML/H regsters */ + struct cyclecounter cc; + struct timecounter tc; }; struct e1000_info { @@ -416,6 +427,38 @@ struct e1000_info { const struct e1000_nvm_operations *nvm_ops; }; +/* The system time is maintained by a 64-bit counter comprised of the 32-bit + * SYSTIMH and SYSTIML registers. How the counter increments (and therefore + * its resolution) is based on the contents of the TIMINCA register - it + * increments every incperiod (bits 31:24) clock ticks by incvalue (bits 23:0). + * For the best accuracy, the incperiod should be as small as possible. The + * incvalue is scaled by a factor as large as possible (while still fitting + * in bits 23:0) so that relatively small clock corrections can be made. + * + * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of + * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n) + * bits to count nanoseconds leaving the rest for fractional nonseconds. + */ +#define INCVALUE_96MHz 125 +#define INCVALUE_SHIFT_96MHz 17 +#define INCPERIOD_SHIFT_96MHz 2 +#define INCPERIOD_96MHz (12 >> INCPERIOD_SHIFT_96MHz) + +#define INCVALUE_25MHz 40 +#define INCVALUE_SHIFT_25MHz 18 +#define INCPERIOD_25MHz 1 + +/* Another drawback of scaling the incvalue by a large factor is the + * 64-bit SYSTIM register overflows more quickly. This is dealt with + * by simply reading the clock before it overflows. + * + * Clock ns bits Overflows after + * ~~~~~~ ~~~~~~~ ~~~~~~~~~~~~~~~ + * 96MHz 47-bit 2^(47-INCPERIOD_SHIFT_96MHz) / 10^9 / 3600 = 9.77 hrs + * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours + */ +#define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4) + /* hardware capability, feature, and workaround flags */ #define FLAG_HAS_AMT (1 << 0) #define FLAG_HAS_FLASH (1 << 1) @@ -431,7 +474,7 @@ struct e1000_info { #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) #define FLAG_IS_QUAD_PORT (1 << 13) -/* reserved bit14 */ +#define FLAG_HAS_HW_TIMESTAMP (1 << 14) #define FLAG_APME_IN_WUC (1 << 15) #define FLAG_APME_IN_CTRL3 (1 << 16) #define FLAG_APME_CHECK_PORT_B (1 << 17) @@ -463,6 +506,7 @@ struct e1000_info { #define FLAG2_NO_DISABLE_RX (1 << 10) #define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define FLAG2_DFLT_CRC_STRIPPING (1 << 12) +#define FLAG2_CHECK_RX_HWTSTAMP (1 << 13) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 636ba09..f268cbc 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -108,6 +108,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("dropped_smbus", stats.mgpdc), E1000_STAT("rx_dma_failed", rx_dma_failed), E1000_STAT("tx_dma_failed", tx_dma_failed), + E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), }; #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) @@ -2182,6 +2183,28 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) return 0; } +static int e1000e_get_ts_info(struct net_device *netdev, + struct ethtool_ts_info *info) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + ethtool_op_get_ts_info(netdev, info); + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return 0; + + info->so_timestamping |= (SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE); + + info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON); + + info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_ALL)); + + return 0; +} + static const struct ethtool_ops e1000_ethtool_ops = { .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, @@ -2209,7 +2232,7 @@ static const struct ethtool_ops e1000_ethtool_ops = { .get_coalesce = e1000_get_coalesce, .set_coalesce = e1000_set_coalesce, .get_rxnfc = e1000_get_rxnfc, - .get_ts_info = ethtool_op_get_ts_info, + .get_ts_info = e1000e_get_ts_info, .get_eee = e1000e_get_eee, .set_eee = e1000e_set_eee, }; diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 81afad5..8e7e803 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -60,6 +60,7 @@ enum e1e_registers { E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */ E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */ E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ + E1000_FEXTNVM7 = 0x000E4, /* Future Extended NVM 7 - RW */ E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */ #define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2)) E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */ @@ -241,6 +242,15 @@ enum e1e_registers { #define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4)) #define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE E1000_HICR = 0x08F00, /* Host Interface Control */ + E1000_SYSTIML = 0x0B600, /* System time register Low - RO */ + E1000_SYSTIMH = 0x0B604, /* System time register High - RO */ + E1000_TIMINCA = 0x0B608, /* Increment attributes register - RW */ + E1000_TSYNCTXCTL = 0x0B614, /* Tx Time Sync Control register - RW */ + E1000_TXSTMPL = 0x0B618, /* Tx timestamp value Low - RO */ + E1000_TXSTMPH = 0x0B61C, /* Tx timestamp value High - RO */ + E1000_TSYNCRXCTL = 0x0B620, /* Rx Time Sync Control register - RW */ + E1000_RXSTMPL = 0x0B624, /* Rx timestamp Low - RO */ + E1000_RXSTMPH = 0x0B628, /* Rx timestamp High - RO */ }; #define E1000_MAX_PHY_ADDR 4 diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 3829f7f..50935ef 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4601,6 +4601,7 @@ const struct e1000_info e1000_pch2_info = { .mac = e1000_pch2lan, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4620,6 +4621,7 @@ const struct e1000_info e1000_pch_lpt_info = { .mac = e1000_pch_lpt, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index bf2c84cf..c15b7e4 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -488,20 +488,87 @@ static int e1000_desc_unused(struct e1000_ring *ring) } /** + * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp + * @adapter: board private structure + * @hwtstamps: time stamp structure to update + * @systim: unsigned 64bit system time value. + * + * Convert the system time value stored in the RX/TXSTMP registers into a + * hwtstamp which can be used by the upper level time stamping functions. + * + * The 'systim_lock' spinlock is used to protect the consistency of the + * system time value. This is needed because reading the 64 bit time + * value involves reading two 32 bit registers. The first read latches the + * value. + **/ +static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter, + struct skb_shared_hwtstamps *hwtstamps, + u64 systim) +{ + u64 ns; + unsigned long flags; + + spin_lock_irqsave(&adapter->systim_lock, flags); + ns = timecounter_cyc2time(&adapter->tc, systim); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + memset(hwtstamps, 0, sizeof(*hwtstamps)); + hwtstamps->hwtstamp = ns_to_ktime(ns); +} + +/** + * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp + * @adapter: board private structure + * @status: descriptor extended error and status field + * @skb: particular skb to include time stamp + * + * If the time stamp is valid, convert it into the timecounter ns value + * and store that result into the shhwtstamps structure which is passed + * up the network stack. + **/ +static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status, + struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + u64 rxstmp; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) || + !(status & E1000_RXDEXT_STATERR_TST) || + !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) + return; + + /* The Rx time stamp registers contain the time stamp. No other + * received packet will be time stamped until the Rx time stamp + * registers are read. Because only one packet can be time stamped + * at a time, the register values must belong to this packet and + * therefore none of the other additional attributes need to be + * compared. + */ + rxstmp = (u64)er32(RXSTMPL); + rxstmp |= (u64)er32(RXSTMPH) << 32; + e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp); + + adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP; +} + +/** * e1000_receive_skb - helper function to handle Rx indications * @adapter: board private structure - * @status: descriptor status field as written by hardware + * @staterr: descriptor extended error and status field as written by hardware * @vlan: descriptor vlan field as written by hardware (no le/be conversion) * @skb: pointer to sk_buff to be indicated to stack **/ static void e1000_receive_skb(struct e1000_adapter *adapter, struct net_device *netdev, struct sk_buff *skb, - u8 status, __le16 vlan) + u32 staterr, __le16 vlan) { u16 tag = le16_to_cpu(vlan); + + e1000e_rx_hwtstamp(adapter, staterr, skb); + skb->protocol = eth_type_trans(skb, netdev); - if (status & E1000_RXD_STAT_VP) + if (staterr & E1000_RXD_STAT_VP) __vlan_hwaccel_put_tag(skb, tag); napi_gro_receive(&adapter->napi, skb); @@ -1092,6 +1159,41 @@ static void e1000_print_hw_hang(struct work_struct *work) } /** + * e1000e_tx_hwtstamp_work - check for Tx time stamp + * @work: pointer to work struct + * + * This work function polls the TSYNCTXCTL valid bit to determine when a + * timestamp has been taken for the current stored skb. The timestamp must + * be for this skb because only one such packet is allowed in the queue. + */ +static void e1000e_tx_hwtstamp_work(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, + tx_hwtstamp_work); + struct e1000_hw *hw = &adapter->hw; + + if (!adapter->tx_hwtstamp_skb) + return; + + if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { + struct skb_shared_hwtstamps shhwtstamps; + u64 txstmp; + + txstmp = er32(TXSTMPL); + txstmp |= (u64)er32(TXSTMPH) << 32; + + e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp); + + skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + } else { + /* reschedule to check later */ + schedule_work(&adapter->tx_hwtstamp_work); + } +} + +/** * e1000_clean_tx_irq - Reclaim resources after transmit completes * @tx_ring: Tx descriptor ring * @@ -1345,8 +1447,8 @@ copydone: cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) adapter->rx_hdr_split++; - e1000_receive_skb(adapter, netdev, skb, - staterr, rx_desc->wb.middle.vlan); + e1000_receive_skb(adapter, netdev, skb, staterr, + rx_desc->wb.middle.vlan); next_desc: rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); @@ -3304,6 +3406,159 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) } /** + * e1000e_get_base_timinca - get default SYSTIM time increment attributes + * @adapter: board private structure + * @timinca: pointer to returned time increment attributes + * + * Get attributes for incrementing the System Time Register SYSTIML/H at + * the default base frequency, and set the cyclecounter shift value. + **/ +static s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) +{ + struct e1000_hw *hw = &adapter->hw; + u32 incvalue, incperiod, shift; + + /* Make sure clock is enabled on I217 before checking the frequency */ + if ((hw->mac.type == e1000_pch_lpt) && + !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) && + !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) { + u32 fextnvm7 = er32(FEXTNVM7); + + if (!(fextnvm7 & (1 << 0))) { + ew32(FEXTNVM7, fextnvm7 | (1 << 0)); + e1e_flush(); + } + } + + switch (hw->mac.type) { + case e1000_pch2lan: + case e1000_pch_lpt: + /* On I217, the clock frequency is 25MHz or 96MHz as + * indicated by the System Clock Frequency Indication + */ + if ((hw->mac.type != e1000_pch_lpt) || + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + /* Stable 96MHz frequency */ + incperiod = INCPERIOD_96MHz; + incvalue = INCVALUE_96MHz; + shift = INCVALUE_SHIFT_96MHz; + adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; + break; + } + /* fall-through */ + case e1000_82574: + case e1000_82583: + /* Stable 25MHz frequency */ + incperiod = INCPERIOD_25MHz; + incvalue = INCVALUE_25MHz; + shift = INCVALUE_SHIFT_25MHz; + adapter->cc.shift = shift; + break; + default: + return -EINVAL; + } + + *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) | + ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK)); + + return 0; +} + +/** + * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable + * @adapter: board private structure + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware filters. + * Not all combinations are supported, in particular event type has to be + * specified. Matching the kind of event packet is not supported, with the + * exception of "all V2 events regardless of level 2 or 4". + **/ +static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct hwtstamp_config *config = &adapter->hwtstamp_config; + u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; + u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; + u32 regval; + s32 ret_val; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return -EINVAL; + + /* flags reserved for future extensions - must be zero */ + if (config->flags) + return -EINVAL; + + switch (config->tx_type) { + case HWTSTAMP_TX_OFF: + tsync_tx_ctl = 0; + break; + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config->rx_filter) { + case HWTSTAMP_FILTER_NONE: + tsync_rx_ctl = 0; + break; + case HWTSTAMP_FILTER_ALL: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL; + config->rx_filter = HWTSTAMP_FILTER_ALL; + break; + default: + return -ERANGE; + } + + /* enable/disable Tx h/w time stamping */ + regval = er32(TSYNCTXCTL); + regval &= ~E1000_TSYNCTXCTL_ENABLED; + regval |= tsync_tx_ctl; + ew32(TSYNCTXCTL, regval); + if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) != + (regval & E1000_TSYNCTXCTL_ENABLED)) { + e_err("Timesync Tx Control register not set as expected\n"); + return -EAGAIN; + } + + /* enable/disable Rx h/w time stamping */ + regval = er32(TSYNCRXCTL); + regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK); + regval |= tsync_rx_ctl; + ew32(TSYNCRXCTL, regval); + if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED | + E1000_TSYNCRXCTL_TYPE_MASK)) != + (regval & (E1000_TSYNCRXCTL_ENABLED | + E1000_TSYNCRXCTL_TYPE_MASK))) { + e_err("Timesync Rx Control register not set as expected\n"); + return -EAGAIN; + } + + /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ + regval = er32(RXSTMPH); + regval = er32(TXSTMPH); + + /* Get and set the System Time Register SYSTIM base frequency */ + ret_val = e1000e_get_base_timinca(adapter, ®val); + if (ret_val) + return ret_val; + ew32(TIMINCA, regval); + + /* reset the ns time counter */ + timecounter_init(&adapter->tc, &adapter->cc, + ktime_to_ns(ktime_get_real())); + + return 0; +} + +/** * e1000_configure - configure the hardware for Rx and Tx * @adapter: private board structure **/ @@ -3529,6 +3784,9 @@ void e1000e_reset(struct e1000_adapter *adapter) e1000e_reset_adaptive(hw); + /* initialize systim and reset the ns time counter */ + e1000e_config_hwtstamp(adapter); + if (!netif_running(adapter->netdev) && !test_bit(__E1000_TESTING, &adapter->state)) { e1000_power_down_phy(adapter); @@ -3665,6 +3923,24 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) } /** + * e1000e_cyclecounter_read - read raw cycle counter (used by time counter) + * @cc: cyclecounter structure + **/ +static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) +{ + struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, + cc); + struct e1000_hw *hw = &adapter->hw; + cycle_t systim; + + /* latch SYSTIMH on read of SYSTIML */ + systim = (cycle_t)er32(SYSTIML); + systim |= (cycle_t)er32(SYSTIMH) << 32; + + return systim; +} + +/** * e1000_sw_init - Initialize general software structures (struct e1000_adapter) * @adapter: board private structure to initialize * @@ -3690,6 +3966,17 @@ static int e1000_sw_init(struct e1000_adapter *adapter) if (e1000_alloc_queues(adapter)) return -ENOMEM; + /* Setup hardware time stamping cyclecounter */ + if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { + adapter->cc.read = e1000e_cyclecounter_read; + adapter->cc.mask = CLOCKSOURCE_MASK(64); + adapter->cc.mult = 1; + /* cc.shift set in e1000e_get_base_tininca() */ + + spin_lock_init(&adapter->systim_lock); + INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work); + } + /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); @@ -4597,6 +4884,17 @@ link_up: if (adapter->flags2 & FLAG2_CHECK_PHY_HANG) e1000e_check_82574_phy_workaround(adapter); + /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */ + if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) { + if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) && + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) { + er32(RXSTMPH); + adapter->rx_hwtstamp_cleared++; + } else { + adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP; + } + } + /* Reset the timer */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, @@ -4608,6 +4906,7 @@ link_up: #define E1000_TX_FLAGS_TSO 0x00000004 #define E1000_TX_FLAGS_IPV4 0x00000008 #define E1000_TX_FLAGS_NO_FCS 0x00000010 +#define E1000_TX_FLAGS_HWTSTAMP 0x00000020 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 @@ -4866,6 +5165,11 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) txd_lower &= ~(E1000_TXD_CMD_IFCS); + if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) { + txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; + txd_upper |= E1000_TXD_EXTCMD_TSTAMP; + } + i = tx_ring->next_to_use; do { @@ -5089,7 +5393,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, nr_frags); if (count) { - skb_tx_timestamp(skb); + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + !adapter->tx_hwtstamp_skb)) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= E1000_TX_FLAGS_HWTSTAMP; + adapter->tx_hwtstamp_skb = skb_get(skb); + schedule_work(&adapter->tx_hwtstamp_work); + } else { + skb_tx_timestamp(skb); + } netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); @@ -5317,6 +5629,43 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, return 0; } +/** + * e1000e_hwtstamp_ioctl - control hardware time stamping + * @netdev: network interface device structure + * @ifreq: interface request + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware filters. + * Not all combinations are supported, in particular event type has to be + * specified. Matching the kind of event packet is not supported, with the + * exception of "all V2 events regardless of level 2 or 4". + **/ +static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct hwtstamp_config config; + int ret_val; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + adapter->hwtstamp_config = config; + + ret_val = e1000e_config_hwtstamp(adapter); + if (ret_val) + return ret_val; + + config = adapter->hwtstamp_config; + + return copy_to_user(ifr->ifr_data, &config, + sizeof(config)) ? -EFAULT : 0; +} + static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -5324,6 +5673,8 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) case SIOCGMIIREG: case SIOCSMIIREG: return e1000_mii_ioctl(netdev, ifr, cmd); + case SIOCSHWTSTAMP: + return e1000e_hwtstamp_ioctl(netdev, ifr); default: return -EOPNOTSUPP; } @@ -6380,6 +6731,14 @@ static void e1000_remove(struct pci_dev *pdev) cancel_work_sync(&adapter->update_phy_task); cancel_work_sync(&adapter->print_hang_task); + if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { + cancel_work_sync(&adapter->tx_hwtstamp_work); + if (adapter->tx_hwtstamp_skb) { + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + } + } + if (!(netdev->flags & IFF_UP)) e1000_power_down_phy(adapter); -- cgit v0.10.2 From fa44f2f185f7f9da19d331929bb1b56c1ccd1d93 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Thu, 17 Jan 2013 01:03:06 -0800 Subject: igb: Enable SR-IOV configuration via PCI sysfs interface Implement callback in the driver for the new PCI bus driver interface that allows the user to enable/disable SR-IOV virtual functions in a device via the sysfs interface. Signed-off-by: Greg Rose Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a0a31b5..342bbd6 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -193,6 +193,7 @@ static const struct dev_pm_ops igb_pm_ops = { }; #endif static void igb_shutdown(struct pci_dev *); +static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs); #ifdef CONFIG_IGB_DCA static int igb_notify_dca(struct notifier_block *, unsigned long, void *); static struct notifier_block dca_notifier = { @@ -234,6 +235,7 @@ static struct pci_driver igb_driver = { .driver.pm = &igb_pm_ops, #endif .shutdown = igb_shutdown, + .sriov_configure = igb_pci_sriov_configure, .err_handler = &igb_err_handler }; @@ -2195,6 +2197,99 @@ err_dma: return err; } +#ifdef CONFIG_PCI_IOV +static int igb_disable_sriov(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* reclaim resources allocated to VFs */ + if (adapter->vf_data) { + /* disable iov and allow time for transactions to clear */ + if (igb_vfs_are_assigned(adapter)) { + dev_warn(&pdev->dev, + "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n"); + return -EPERM; + } else { + pci_disable_sriov(pdev); + msleep(500); + } + + kfree(adapter->vf_data); + adapter->vf_data = NULL; + adapter->vfs_allocated_count = 0; + wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); + wrfl(); + msleep(100); + dev_info(&pdev->dev, "IOV Disabled\n"); + + /* Re-enable DMA Coalescing flag since IOV is turned off */ + adapter->flags |= IGB_FLAG_DMAC; + } + + return 0; +} + +static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + int old_vfs = pci_num_vf(pdev); + int err = 0; + int i; + + if (!num_vfs) + goto out; + else if (old_vfs && old_vfs == num_vfs) + goto out; + else if (old_vfs && old_vfs != num_vfs) + err = igb_disable_sriov(pdev); + + if (err) + goto out; + + if (num_vfs > 7) { + err = -EPERM; + goto out; + } + + adapter->vfs_allocated_count = num_vfs; + + adapter->vf_data = kcalloc(adapter->vfs_allocated_count, + sizeof(struct vf_data_storage), GFP_KERNEL); + + /* if allocation failed then we do not support SR-IOV */ + if (!adapter->vf_data) { + adapter->vfs_allocated_count = 0; + dev_err(&pdev->dev, + "Unable to allocate memory for VF Data Storage\n"); + err = -ENOMEM; + goto out; + } + + err = pci_enable_sriov(pdev, adapter->vfs_allocated_count); + if (err) + goto err_out; + + dev_info(&pdev->dev, "%d VFs allocated\n", + adapter->vfs_allocated_count); + for (i = 0; i < adapter->vfs_allocated_count; i++) + igb_vf_configure(adapter, i); + + /* DMA Coalescing is not supported in IOV mode. */ + adapter->flags &= ~IGB_FLAG_DMAC; + goto out; + +err_out: + kfree(adapter->vf_data); + adapter->vf_data = NULL; + adapter->vfs_allocated_count = 0; +out: + return err; +} + +#endif /** * igb_remove - Device Removal Routine * @pdev: PCI device information struct @@ -2242,23 +2337,7 @@ static void igb_remove(struct pci_dev *pdev) igb_clear_interrupt_scheme(adapter); #ifdef CONFIG_PCI_IOV - /* reclaim resources allocated to VFs */ - if (adapter->vf_data) { - /* disable iov and allow time for transactions to clear */ - if (igb_vfs_are_assigned(adapter)) { - dev_info(&pdev->dev, "Unloading driver while VFs are assigned - VFs will not be deallocated\n"); - } else { - pci_disable_sriov(pdev); - msleep(500); - } - - kfree(adapter->vf_data); - adapter->vf_data = NULL; - wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); - wrfl(); - msleep(100); - dev_info(&pdev->dev, "IOV Disabled\n"); - } + igb_disable_sriov(pdev); #endif iounmap(hw->hw_addr); @@ -2289,103 +2368,22 @@ static void igb_probe_vfs(struct igb_adapter *adapter) #ifdef CONFIG_PCI_IOV struct pci_dev *pdev = adapter->pdev; struct e1000_hw *hw = &adapter->hw; - int old_vfs = pci_num_vf(adapter->pdev); - int i; /* Virtualization features not supported on i210 family. */ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) return; - if (old_vfs) { - dev_info(&pdev->dev, "%d pre-allocated VFs found - override " - "max_vfs setting of %d\n", old_vfs, max_vfs); - adapter->vfs_allocated_count = old_vfs; - } - - if (!adapter->vfs_allocated_count) - return; - - adapter->vf_data = kcalloc(adapter->vfs_allocated_count, - sizeof(struct vf_data_storage), GFP_KERNEL); - - /* if allocation failed then we do not support SR-IOV */ - if (!adapter->vf_data) { - adapter->vfs_allocated_count = 0; - dev_err(&pdev->dev, "Unable to allocate memory for VF " - "Data Storage\n"); - goto out; - } + igb_enable_sriov(pdev, max_vfs); + pci_sriov_set_totalvfs(pdev, 7); - if (!old_vfs) { - if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) - goto err_out; - } - dev_info(&pdev->dev, "%d VFs allocated\n", - adapter->vfs_allocated_count); - for (i = 0; i < adapter->vfs_allocated_count; i++) - igb_vf_configure(adapter, i); - - /* DMA Coalescing is not supported in IOV mode. */ - adapter->flags &= ~IGB_FLAG_DMAC; - goto out; -err_out: - kfree(adapter->vf_data); - adapter->vf_data = NULL; - adapter->vfs_allocated_count = 0; -out: - return; #endif /* CONFIG_PCI_IOV */ } -/** - * igb_sw_init - Initialize general software structures (struct igb_adapter) - * @adapter: board private structure to initialize - * - * igb_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ -static int igb_sw_init(struct igb_adapter *adapter) +static void igb_init_queue_configuration(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; u32 max_rss_queues; - pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); - - /* set default ring sizes */ - adapter->tx_ring_count = IGB_DEFAULT_TXD; - adapter->rx_ring_count = IGB_DEFAULT_RXD; - - /* set default ITR values */ - adapter->rx_itr_setting = IGB_DEFAULT_ITR; - adapter->tx_itr_setting = IGB_DEFAULT_ITR; - - /* set default work limits */ - adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; - - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + - VLAN_HLEN; - adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - - spin_lock_init(&adapter->stats64_lock); -#ifdef CONFIG_PCI_IOV - switch (hw->mac.type) { - case e1000_82576: - case e1000_i350: - if (max_vfs > 7) { - dev_warn(&pdev->dev, - "Maximum of 7 VFs per PF, using max\n"); - adapter->vfs_allocated_count = 7; - } else - adapter->vfs_allocated_count = max_vfs; - break; - default: - break; - } -#endif /* CONFIG_PCI_IOV */ - /* Determine the maximum number of RSS queues supported. */ switch (hw->mac.type) { case e1000_i211: @@ -2444,6 +2442,60 @@ static int igb_sw_init(struct igb_adapter *adapter) adapter->flags |= IGB_FLAG_QUEUE_PAIRS; break; } +} + +/** + * igb_sw_init - Initialize general software structures (struct igb_adapter) + * @adapter: board private structure to initialize + * + * igb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int igb_sw_init(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); + + /* set default ring sizes */ + adapter->tx_ring_count = IGB_DEFAULT_TXD; + adapter->rx_ring_count = IGB_DEFAULT_RXD; + + /* set default ITR values */ + adapter->rx_itr_setting = IGB_DEFAULT_ITR; + adapter->tx_itr_setting = IGB_DEFAULT_ITR; + + /* set default work limits */ + adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; + + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + + VLAN_HLEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + spin_lock_init(&adapter->stats64_lock); +#ifdef CONFIG_PCI_IOV + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + if (max_vfs > 7) { + dev_warn(&pdev->dev, + "Maximum of 7 VFs per PF, using max\n"); + adapter->vfs_allocated_count = 7; + } else + adapter->vfs_allocated_count = max_vfs; + if (adapter->vfs_allocated_count) + dev_warn(&pdev->dev, + "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n"); + break; + default: + break; + } +#endif /* CONFIG_PCI_IOV */ + + igb_init_queue_configuration(adapter); /* Setup and initialize a copy of the hw vlan table array */ adapter->shadow_vfta = kzalloc(sizeof(u32) * @@ -6902,6 +6954,72 @@ static void igb_shutdown(struct pci_dev *pdev) } } +#ifdef CONFIG_PCI_IOV +static int igb_sriov_reinit(struct pci_dev *dev) +{ + struct net_device *netdev = pci_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + + rtnl_lock(); + + if (netif_running(netdev)) + igb_close(netdev); + + igb_clear_interrupt_scheme(adapter); + + igb_init_queue_configuration(adapter); + + if (igb_init_interrupt_scheme(adapter, true)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + if (netif_running(netdev)) + igb_open(netdev); + + rtnl_unlock(); + + return 0; +} + +static int igb_pci_disable_sriov(struct pci_dev *dev) +{ + int err = igb_disable_sriov(dev); + + if (!err) + err = igb_sriov_reinit(dev); + + return err; +} + +static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs) +{ + int err = igb_enable_sriov(dev, num_vfs); + + if (err) + goto out; + + err = igb_sriov_reinit(dev); + if (!err) + return num_vfs; + +out: + return err; +} + +#endif +static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs) +{ +#ifdef CONFIG_PCI_IOV + if (num_vfs == 0) + return igb_pci_disable_sriov(dev); + else + return igb_pci_enable_sriov(dev, num_vfs); +#endif + return 0; +} + #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs -- cgit v0.10.2 From 441fc6fdb47ae739eeda625dce5b069941a54db3 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 7 Dec 2012 03:00:30 +0000 Subject: igb: Add i2c interface to igb. Some of our adapters have sensors on them accessible via i2c and a private interface. This patch implements the kernel interface for i2c to those sensors. Subsequent patches will provide functions to export that data. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index bde4f3d..e8912f1 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -94,6 +94,8 @@ config IGB tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI select PTP_1588_CLOCK + select I2C + select I2C_ALGOBIT ---help--- This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index fdaaf27..51e3f4f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -33,6 +33,7 @@ #include #include +#include #include "e1000_mac.h" #include "e1000_82575.h" @@ -2314,6 +2315,8 @@ static struct e1000_phy_operations e1000_phy_ops_82575 = { .acquire = igb_acquire_phy_82575, .get_cfg_done = igb_get_cfg_done_82575, .release = igb_release_phy_82575, + .write_i2c_byte = igb_write_i2c_byte, + .read_i2c_byte = igb_read_i2c_byte, }; static struct e1000_nvm_operations e1000_nvm_ops_82575 = { diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 44b76b3..67bd9f9 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -32,6 +32,10 @@ extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw); extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw); extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); +extern s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +extern s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ (ID_LED_DEF1_DEF2 << 8) | \ @@ -261,4 +265,6 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *, bool); u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); +#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 + #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 45dce06..446678e 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -470,6 +470,7 @@ #define E1000_ERR_NO_SPACE 17 #define E1000_ERR_NVM_PBA_SECTION 18 #define E1000_ERR_INVM_VALUE_NOT_FOUND 19 +#define E1000_ERR_I2C 20 /* Loop limit on how long we wait for auto-negotiation to complete */ #define COPPER_LINK_UP_LIMIT 10 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index c2a51dc..75312ba 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -342,6 +342,8 @@ struct e1000_phy_operations { s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); }; struct e1000_nvm_operations { diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index e5db485..31c3e2f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -75,6 +75,14 @@ #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ #define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ +#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ +#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ +#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ +#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ +#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ +#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ /* IEEE 1588 TIMESYNCH */ #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 17f1686..9f1af1b 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -39,6 +39,8 @@ #include #include #include +#include +#include struct igb_adapter; @@ -301,6 +303,11 @@ static inline int igb_desc_unused(struct igb_ring *ring) return ring->count + ring->next_to_clean - ring->next_to_use - 1; } +struct igb_i2c_client_list { + struct i2c_client *client; + struct igb_i2c_client_list *next; +}; + /* board specific private data structure */ struct igb_adapter { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -391,6 +398,9 @@ struct igb_adapter { struct timecounter tc; char fw_version[32]; + struct i2c_algo_bit_data i2c_algo; + struct i2c_adapter i2c_adap; + struct igb_i2c_client_list *i2c_clients; }; #define IGB_FLAG_HAS_MSI (1 << 0) @@ -466,7 +476,6 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector, extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); - static inline s32 igb_reset_phy(struct e1000_hw *hw) { if (hw->phy.ops.reset) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 342bbd6..0173b61 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -57,6 +57,7 @@ #ifdef CONFIG_IGB_DCA #include #endif +#include #include "igb.h" #define MAJ 4 @@ -567,6 +568,91 @@ exit: return; } +/* igb_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + */ +static int igb_get_i2c_data(void *data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + return ((i2cctl & E1000_I2C_DATA_IN) != 0); +} + +/* igb_set_i2c_data - Sets the I2C data bit + * @data: pointer to hardware structure + * @state: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + */ +static void igb_set_i2c_data(void *data, int state) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + if (state) + i2cctl |= E1000_I2C_DATA_OUT; + else + i2cctl &= ~E1000_I2C_DATA_OUT; + + i2cctl &= ~E1000_I2C_DATA_OE_N; + i2cctl |= E1000_I2C_CLK_OE_N; + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); + +} + +/* igb_set_i2c_clk - Sets the I2C SCL clock + * @data: pointer to hardware structure + * @state: state to set clock + * + * Sets the I2C clock line to state + */ +static void igb_set_i2c_clk(void *data, int state) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + if (state) { + i2cctl |= E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } else { + i2cctl &= ~E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); +} + +/* igb_get_i2c_clk - Gets the I2C SCL clock state + * @data: pointer to hardware structure + * + * Gets the I2C clock state + */ +static int igb_get_i2c_clk(void *data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + return ((i2cctl & E1000_I2C_CLK_IN) != 0); +} + +static const struct i2c_algo_bit_data igb_i2c_algo = { + .setsda = igb_set_i2c_data, + .setscl = igb_set_i2c_clk, + .getsda = igb_get_i2c_data, + .getscl = igb_get_i2c_clk, + .udelay = 5, + .timeout = 20, +}; + /** * igb_get_hw_dev - return device * used by hardware layer to print debugging information @@ -1824,6 +1910,37 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } +static const struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", 0Xf8), +}; + +/* igb_init_i2c - Init I2C interface + * @adapter: pointer to adapter structure + * + */ +static s32 igb_init_i2c(struct igb_adapter *adapter) +{ + s32 status = E1000_SUCCESS; + + /* I2C interface supported on i350 devices */ + if (adapter->hw.mac.type != e1000_i350) + return E1000_SUCCESS; + + /* Initialize the i2c bus which is controlled by the registers. + * This bus will use the i2c_algo_bit structue that implements + * the protocol through toggling of the 4 bits in the register. + */ + adapter->i2c_adap.owner = THIS_MODULE; + adapter->i2c_algo = igb_i2c_algo; + adapter->i2c_algo.data = adapter; + adapter->i2c_adap.algo_data = &adapter->i2c_algo; + adapter->i2c_adap.dev.parent = &adapter->pdev->dev; + strlcpy(adapter->i2c_adap.name, "igb BB", + sizeof(adapter->i2c_adap.name)); + status = i2c_bit_add_bus(&adapter->i2c_adap); + return status; +} + /** * igb_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -2116,6 +2233,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* reset the hardware with the new settings */ igb_reset(adapter); + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } + /* let the f/w know that the h/w is now under the control of the * driver. */ igb_get_hw_control(adapter); @@ -2177,6 +2301,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err_register: igb_release_hw_control(adapter); + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); err_eeprom: if (!igb_check_reset_block(hw)) igb_reset_phy(hw); @@ -2290,6 +2415,18 @@ out: } #endif +/* + * igb_remove_i2c - Cleanup I2C interface + * @adapter: pointer to adapter structure + * + */ +static void igb_remove_i2c(struct igb_adapter *adapter) +{ + + /* free the adapter bus structure */ + i2c_del_adapter(&adapter->i2c_adap); +} + /** * igb_remove - Device Removal Routine * @pdev: PCI device information struct @@ -2306,6 +2443,8 @@ static void igb_remove(struct pci_dev *pdev) struct e1000_hw *hw = &adapter->hw; pm_runtime_get_noresume(&pdev->dev); + igb_remove_i2c(adapter); + igb_ptp_stop(adapter); /* @@ -7425,4 +7564,134 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } +static DEFINE_SPINLOCK(i2c_clients_lock); + +/* igb_get_i2c_client - returns matching client + * in adapters's client list. + * @adapter: adapter struct + * @dev_addr: device address of i2c needed. + */ +struct i2c_client * +igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) +{ + ulong flags; + struct igb_i2c_client_list *client_list; + struct i2c_client *client = NULL; + struct i2c_board_info client_info = { + I2C_BOARD_INFO("igb", 0x00), + }; + + spin_lock_irqsave(&i2c_clients_lock, flags); + client_list = adapter->i2c_clients; + + /* See if we already have an i2c_client */ + while (client_list) { + if (client_list->client->addr == (dev_addr >> 1)) { + client = client_list->client; + goto exit; + } else { + client_list = client_list->next; + } + } + + /* no client_list found, create a new one */ + client_list = kzalloc(sizeof(*client_list), GFP_KERNEL); + if (client_list == NULL) + goto exit; + + /* dev_addr passed to us is left-shifted by 1 bit + * i2c_new_device call expects it to be flush to the right. + */ + client_info.addr = dev_addr >> 1; + client_info.platform_data = adapter; + client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); + if (client_list->client == NULL) { + dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n"); + goto err_no_client; + } + + /* insert new client at head of list */ + client_list->next = adapter->i2c_clients; + adapter->i2c_clients = client_list; + + spin_unlock_irqrestore(&i2c_clients_lock, flags); + + client = client_list->client; + goto exit; + +err_no_client: + kfree(client_list); +exit: + spin_unlock_irqrestore(&i2c_clients_lock, flags); + return client; +} + +/* igb_read_i2c_byte - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + */ +s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + s32 status; + u16 swfw_mask = 0; + + if (!this_client) + return E1000_ERR_I2C; + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + + status = i2c_smbus_read_byte_data(this_client, byte_offset); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status < 0) + return E1000_ERR_I2C; + else { + *data = status; + return E1000_SUCCESS; + } +} + +/* igb_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + */ +s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + s32 status; + u16 swfw_mask = E1000_SWFW_PHY0_SM; + + if (!this_client) + return E1000_ERR_I2C; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + status = i2c_smbus_write_byte_data(this_client, byte_offset, data); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status) + return E1000_ERR_I2C; + else + return E1000_SUCCESS; + +} /* igb_main.c */ -- cgit v0.10.2 From aca5dae8341bc0d340461bdb99749039266a0d81 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 7 Dec 2012 03:01:16 +0000 Subject: igb: Add support functions to access thermal data. Some of our devices have internal sensors for reporting thermal data. This patch creates the interface to the sensors for exporting via sysfs. Subsequent patch will actually export the data. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 67bd9f9..caf6abf 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -266,5 +266,12 @@ u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); #define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 - +#define E1000_EMC_INTERNAL_DATA 0x00 +#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20 +#define E1000_EMC_DIODE1_DATA 0x01 +#define E1000_EMC_DIODE1_THERM_LIMIT 0x19 +#define E1000_EMC_DIODE2_DATA 0x23 +#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A +#define E1000_EMC_DIODE3_DATA 0x2A +#define E1000_EMC_DIODE3_THERM_LIMIT 0x30 #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 446678e..9b7ef93 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -675,6 +675,18 @@ #define NVM_COMB_VER_SHFT 8 #define NVM_VER_INVALID 0xFFFF #define NVM_ETRACK_SHIFT 16 +#define NVM_ETS_CFG 0x003E +#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 +#define NVM_ETS_LTHRES_DELTA_SHIFT 6 +#define NVM_ETS_TYPE_MASK 0x0038 +#define NVM_ETS_TYPE_SHIFT 3 +#define NVM_ETS_TYPE_EMC 0x000 +#define NVM_ETS_NUM_SENSORS_MASK 0x0007 +#define NVM_ETS_DATA_LOC_MASK 0x3C00 +#define NVM_ETS_DATA_LOC_SHIFT 10 +#define NVM_ETS_DATA_INDEX_MASK 0x0300 +#define NVM_ETS_DATA_INDEX_SHIFT 8 +#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF #define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ #define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 75312ba..837a274 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -356,6 +356,19 @@ struct e1000_nvm_operations { s32 (*valid_led_default)(struct e1000_hw *, u16 *); }; +#define E1000_MAX_SENSORS 3 + +struct e1000_thermal_diode_data { + u8 location; + u8 temp; + u8 caution_thresh; + u8 max_op_thresh; +}; + +struct e1000_thermal_sensor_data { + struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS]; +}; + struct e1000_info { s32 (*get_invariants)(struct e1000_hw *); struct e1000_mac_operations *mac_ops; @@ -401,6 +414,7 @@ struct e1000_mac_info { bool report_tx_early; bool serdes_has_link; bool tx_pkt_filtering; + struct e1000_thermal_sensor_data thermal_sensor_data; }; struct e1000_phy_info { diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 31c3e2f..889de26 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -132,6 +132,14 @@ /* Split and Replication RX Control - RW */ #define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ + +/* Thermal sensor configuration and status registers */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + /* * Convenience macros * -- cgit v0.10.2 From e428893b7d0aecd0ca627c439e7420334824f764 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 7 Dec 2012 03:01:42 +0000 Subject: igb: Enable hwmon data output for thermal sensors via I2C. Some of our adapters have internal sensors that report thermal data. This patch enables reporting of that data via sysfs. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index e8912f1..21353f0 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -114,6 +114,17 @@ config IGB To compile this driver as a module, choose M here. The module will be called igb. +config IGB_HWMON + bool "Intel(R) PCI-Express Gigabit adapters HWMON support" + default y + depends on IGB && HWMON && !(IGB=y && HWMON=m) + ---help--- + Say Y if you want to expose thermal sensor data on Intel devices. + + Some of our devices contain thermal sensors, both external and internal. + This data is available via the hwmon sysfs interface and exposes + the onboard sensors. + config IGB_DCA bool "Direct Cache Access (DCA) Support" default y diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile index 624476c..f9d37c8 100644 --- a/drivers/net/ethernet/intel/igb/Makefile +++ b/drivers/net/ethernet/intel/igb/Makefile @@ -34,4 +34,4 @@ obj-$(CONFIG_IGB) += igb.o igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \ e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \ - e1000_i210.o igb_ptp.o + e1000_i210.o igb_ptp.o igb_hwmon.o diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 51e3f4f..b6ec782 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -2303,12 +2303,149 @@ out: return ret_val; } +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + */ +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return status; +} + +/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + */ +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (rd32(E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (rd32(E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} + static struct e1000_mac_operations e1000_mac_ops_82575 = { .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, .get_speed_and_duplex = igb_get_speed_and_duplex_copper, +#ifdef CONFIG_IGB_HWMON + .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic, + .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic, +#endif }; static struct e1000_phy_operations e1000_phy_ops_82575 = { diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index caf6abf..444f6f521 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -264,6 +264,8 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool); void igb_vmdq_set_replication_pf(struct e1000_hw *, bool); u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *); +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw); #define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 #define E1000_EMC_INTERNAL_DATA 0x00 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 837a274..2c9b6f4 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -325,6 +325,10 @@ struct e1000_mac_operations { s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); void (*release_swfw_sync)(struct e1000_hw *, u16); +#ifdef CONFIG_IGB_HWMON + s32 (*get_thermal_sensor_data)(struct e1000_hw *); + s32 (*init_thermal_sensor_thresh)(struct e1000_hw *); +#endif }; diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 9f1af1b..8372c00 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -308,6 +308,27 @@ struct igb_i2c_client_list { struct igb_i2c_client_list *next; }; +#ifdef CONFIG_IGB_HWMON + +#define IGB_HWMON_TYPE_LOC 0 +#define IGB_HWMON_TYPE_TEMP 1 +#define IGB_HWMON_TYPE_CAUTION 2 +#define IGB_HWMON_TYPE_MAX 3 + +struct hwmon_attr { + struct device_attribute dev_attr; + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor; + char name[12]; + }; + +struct hwmon_buff { + struct device *device; + struct hwmon_attr *hwmon_list; + unsigned int n_hwmon; + }; +#endif + /* board specific private data structure */ struct igb_adapter { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -398,6 +419,10 @@ struct igb_adapter { struct timecounter tc; char fw_version[32]; +#ifdef CONFIG_IGB_HWMON + struct hwmon_buff igb_hwmon_buff; + bool ets; +#endif struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; struct igb_i2c_client_list *i2c_clients; @@ -476,6 +501,10 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector, extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); +#ifdef CONFIG_IGB_HWMON +extern void igb_sysfs_exit(struct igb_adapter *adapter); +extern int igb_sysfs_init(struct igb_adapter *adapter); +#endif static inline s32 igb_reset_phy(struct e1000_hw *hw) { if (hw->phy.ops.reset) diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c new file mode 100644 index 0000000..106bd7c --- /dev/null +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -0,0 +1,242 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2012 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "igb.h" +#include "e1000_82575.h" +#include "e1000_hw.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_IGB_HWMON +/* hwmon callback functions */ +static ssize_t igb_hwmon_show_location(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + return sprintf(buf, "loc%u\n", + igb_attr->sensor->location); +} + +static ssize_t igb_hwmon_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value; + + /* reset the temp field */ + igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw); + + value = igb_attr->sensor->temp; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +static ssize_t igb_hwmon_show_cautionthresh(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value = igb_attr->sensor->caution_thresh; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +static ssize_t igb_hwmon_show_maxopthresh(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value = igb_attr->sensor->max_op_thresh; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file. + * @ adapter: pointer to the adapter structure + * @ offset: offset in the eeprom sensor data table + * @ type: type of sensor data to display + * + * For each file we want in hwmon's sysfs interface we need a device_attribute + * This is included in our hwmon_attr struct that contains the references to + * the data structures we need to get the data to display. + */ +static int igb_add_hwmon_attr(struct igb_adapter *adapter, + unsigned int offset, int type) { + int rc; + unsigned int n_attr; + struct hwmon_attr *igb_attr; + + n_attr = adapter->igb_hwmon_buff.n_hwmon; + igb_attr = &adapter->igb_hwmon_buff.hwmon_list[n_attr]; + + switch (type) { + case IGB_HWMON_TYPE_LOC: + igb_attr->dev_attr.show = igb_hwmon_show_location; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_label", offset); + break; + case IGB_HWMON_TYPE_TEMP: + igb_attr->dev_attr.show = igb_hwmon_show_temp; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_input", offset); + break; + case IGB_HWMON_TYPE_CAUTION: + igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_max", offset); + break; + case IGB_HWMON_TYPE_MAX: + igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_crit", offset); + break; + default: + rc = -EPERM; + return rc; + } + + /* These always the same regardless of type */ + igb_attr->sensor = + &adapter->hw.mac.thermal_sensor_data.sensor[offset]; + igb_attr->hw = &adapter->hw; + igb_attr->dev_attr.store = NULL; + igb_attr->dev_attr.attr.mode = S_IRUGO; + igb_attr->dev_attr.attr.name = igb_attr->name; + sysfs_attr_init(&igb_attr->dev_attr.attr); + rc = device_create_file(&adapter->pdev->dev, + &igb_attr->dev_attr); + if (rc == 0) + ++adapter->igb_hwmon_buff.n_hwmon; + + return rc; +} + +static void igb_sysfs_del_adapter(struct igb_adapter *adapter) +{ + int i; + + if (adapter == NULL) + return; + + for (i = 0; i < adapter->igb_hwmon_buff.n_hwmon; i++) { + device_remove_file(&adapter->pdev->dev, + &adapter->igb_hwmon_buff.hwmon_list[i].dev_attr); + } + + kfree(adapter->igb_hwmon_buff.hwmon_list); + + if (adapter->igb_hwmon_buff.device) + hwmon_device_unregister(adapter->igb_hwmon_buff.device); +} + +/* called from igb_main.c */ +void igb_sysfs_exit(struct igb_adapter *adapter) +{ + igb_sysfs_del_adapter(adapter); +} + +/* called from igb_main.c */ +int igb_sysfs_init(struct igb_adapter *adapter) +{ + struct hwmon_buff *igb_hwmon = &adapter->igb_hwmon_buff; + unsigned int i; + int n_attrs; + int rc = 0; + + /* If this method isn't defined we don't support thermals */ + if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) + goto exit; + + /* Don't create thermal hwmon interface if no sensors present */ + rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw)); + if (rc) + goto exit; + + /* Allocation space for max attributes + * max num sensors * values (loc, temp, max, caution) + */ + n_attrs = E1000_MAX_SENSORS * 4; + igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr), + GFP_KERNEL); + if (!igb_hwmon->hwmon_list) { + rc = -ENOMEM; + goto err; + } + + igb_hwmon->device = hwmon_device_register(&adapter->pdev->dev); + if (IS_ERR(igb_hwmon->device)) { + rc = PTR_ERR(igb_hwmon->device); + goto err; + } + + for (i = 0; i < E1000_MAX_SENSORS; i++) { + + /* Only create hwmon sysfs entries for sensors that have + * meaningful data. + */ + if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0) + continue; + + /* Bail if any hwmon attr struct fails to initialize */ + rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX); + if (rc) + goto err; + } + + goto exit; + +err: + igb_sysfs_del_adapter(adapter); +exit: + return rc; +} +#endif diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 0173b61..a9cb84a 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1796,6 +1796,18 @@ void igb_reset(struct igb_adapter *adapter) igb_force_mac_fc(hw); igb_init_dmac(adapter, pba); +#ifdef CONFIG_IGB_HWMON + /* Re-initialize the thermal sensor on i350 devices. */ + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (mac->type == e1000_i350 && hw->bus.func == 0) { + /* If present, re-initialize the external thermal sensor + * interface. + */ + if (adapter->ets) + mac->ops.init_thermal_sensor_thresh(hw); + } + } +#endif if (!netif_running(adapter->netdev)) igb_power_down_link(adapter); @@ -2260,7 +2272,27 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } #endif +#ifdef CONFIG_IGB_HWMON + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350 && hw->bus.func == 0) { + u16 ets_word; + /* + * Read the NVM to determine if this i350 device supports an + * external thermal sensor. + */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + if (igb_sysfs_init(adapter)) + dev_err(&pdev->dev, + "failed to allocate sysfs resources\n"); + } else { + adapter->ets = false; + } +#endif /* do hw tstamp init after resetting */ igb_ptp_init(adapter); @@ -2443,10 +2475,11 @@ static void igb_remove(struct pci_dev *pdev) struct e1000_hw *hw = &adapter->hw; pm_runtime_get_noresume(&pdev->dev); +#ifdef CONFIG_IGB_HWMON + igb_sysfs_exit(adapter); +#endif igb_remove_i2c(adapter); - igb_ptp_stop(adapter); - /* * The watchdog timer may be rescheduled, so explicitly * disable watchdog from being rescheduled. @@ -7594,7 +7627,12 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) } } - /* no client_list found, create a new one */ + /* no client_list found, create a new one as long as + * irqs are not disabled + */ + if (unlikely(irqs_disabled())) + goto exit; + client_list = kzalloc(sizeof(*client_list), GFP_KERNEL); if (client_list == NULL) goto exit; @@ -7606,7 +7644,8 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) client_info.platform_data = adapter; client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); if (client_list->client == NULL) { - dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n"); + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); goto err_no_client; } @@ -7614,8 +7653,6 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) client_list->next = adapter->i2c_clients; adapter->i2c_clients = client_list; - spin_unlock_irqrestore(&i2c_clients_lock, flags); - client = client_list->client; goto exit; -- cgit v0.10.2 From b66e2397cd277cf2bec2628b3ed35865df2609e5 Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Thu, 13 Dec 2012 07:20:33 +0000 Subject: igb: Add support for SW timestamping Enable SW timestamping for situations where the user may prefer it over HW timestamping or there may not be HW timestamping. Cc: Richard Cochran Signed-off-by: Matthew Vick Acked-by: Jacob Keller Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index bfe9208..6180303 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2272,12 +2272,21 @@ static int igb_get_ts_info(struct net_device *dev, struct igb_adapter *adapter = netdev_priv(dev); switch (adapter->hw.mac.type) { + case e1000_82575: + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; + return 0; case e1000_82576: case e1000_82580: case e1000_i350: case e1000_i210: case e1000_i211: info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_HARDWARE | SOF_TIMESTAMPING_RX_HARDWARE | SOF_TIMESTAMPING_RAW_HARDWARE; diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a9cb84a..9dd3da5 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4610,6 +4610,8 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, first->bytecount = skb->len; first->gso_segs = 1; + skb_tx_timestamp(skb); + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && !(adapter->ptp_tx_skb))) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; -- cgit v0.10.2 From 428f1f715131ea5ae32e29502541ce007f556b5b Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Thu, 13 Dec 2012 07:20:34 +0000 Subject: igb: Add timeout for PTP Tx work item When transmitting a packet that must return a Tx timestamp, a work item gets scheduled to poll for the Tx timestamp being completed in hardware. Add a timeout on this work item of 15 seconds from when the driver gets the skb, after which it will stop polling. Report via stats and system log if this occurs. Cc: Richard Cochran Signed-off-by: Matthew Vick Acked-by: Jacob Keller Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 8372c00..8c6f59d 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -414,9 +414,11 @@ struct igb_adapter { struct delayed_work ptp_overflow_work; struct work_struct ptp_tx_work; struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; + u32 tx_hwtstamp_timeouts; char fw_version[32]; #ifdef CONFIG_IGB_HWMON diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 6180303..6f2579c 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -92,6 +92,7 @@ static const struct igb_stats igb_gstrings_stats[] = { IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc), IGB_STAT("os2bmc_tx_by_host", stats.o2bspc), IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc), + IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), }; #define IGB_NETDEV_STAT(_net_stat) { \ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 9dd3da5..9540a81 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4618,6 +4618,7 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, tx_flags |= IGB_TX_FLAGS_TSTAMP; adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; if (adapter->hw.mac.type == e1000_82576) schedule_work(&adapter->ptp_tx_work); } diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index ab34297..086af46 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -70,6 +70,7 @@ */ #define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9) +#define IGB_PTP_TX_TIMEOUT (HZ * 15) #define INCPERIOD_82576 (1 << E1000_TIMINCA_16NS_SHIFT) #define INCVALUE_82576_MASK ((1 << E1000_TIMINCA_16NS_SHIFT) - 1) #define INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT) @@ -396,6 +397,15 @@ void igb_ptp_tx_work(struct work_struct *work) if (!adapter->ptp_tx_skb) return; + if (time_is_before_jiffies(adapter->ptp_tx_start + + IGB_PTP_TX_TIMEOUT)) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + adapter->tx_hwtstamp_timeouts++; + dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang"); + return; + } + tsynctxctl = rd32(E1000_TSYNCTXCTL); if (tsynctxctl & E1000_TSYNCTXCTL_VALID) igb_ptp_tx_hwtstamp(adapter); -- cgit v0.10.2 From fc5807511699787f69b202d0382eb9f11e1da412 Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Thu, 13 Dec 2012 07:20:35 +0000 Subject: igb: Add mechanism for detecting latched hardware Rx timestamp Add a check against possible Rx timestamp freezing in the hardware via watchdog mechanism. This situation can occur when an Rx timestamp has been latched, but the packet has been dropped because the Rx ring is full. Whenever a packet comes in that should be timestamped, the Rx timestamp gets latched into the hardware registers and we will store the jiffy value in the rx_ring. The watchdog will keep track of his own jiffy timer whenever there is no valid timestamp in the registers. If the watchdog detects a valid timestamp in the registers, meaning that no Rx packet has consumed it yet, it will check which time is most recent: the last time in the watchdog or any time in the rx_rings. If the most recent "event" was more than 5 seconds ago, it will flush the Rx timestamp and print a warning message to the syslog. Cc: Richard Cochran Signed-off-by: Matthew Vick Acked-by: Richard Cochran Acked-by: Jacob Keller Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 8c6f59d..ad317ab 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -221,6 +221,7 @@ struct igb_ring { struct igb_tx_buffer *tx_buffer_info; struct igb_rx_buffer *rx_buffer_info; }; + unsigned long last_rx_timestamp; void *desc; /* descriptor ring memory */ unsigned long flags; /* ring specific flags */ void __iomem *tail; /* pointer to ring tail register */ @@ -415,10 +416,12 @@ struct igb_adapter { struct work_struct ptp_tx_work; struct sk_buff *ptp_tx_skb; unsigned long ptp_tx_start; + unsigned long last_rx_ptp_check; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; u32 tx_hwtstamp_timeouts; + u32 rx_hwtstamp_cleared; char fw_version[32]; #ifdef CONFIG_IGB_HWMON @@ -486,6 +489,7 @@ extern void igb_ptp_init(struct igb_adapter *adapter); extern void igb_ptp_stop(struct igb_adapter *adapter); extern void igb_ptp_reset(struct igb_adapter *adapter); extern void igb_ptp_tx_work(struct work_struct *work); +extern void igb_ptp_rx_hang(struct igb_adapter *adapter); extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter); extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb); diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 6f2579c..3ff3794 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -93,6 +93,7 @@ static const struct igb_stats igb_gstrings_stats[] = { IGB_STAT("os2bmc_tx_by_host", stats.o2bspc), IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc), IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), + IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), }; #define IGB_NETDEV_STAT(_net_stat) { \ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 9540a81..c9e438b 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3991,6 +3991,7 @@ static void igb_watchdog_task(struct work_struct *work) } igb_spoof_check(adapter); + igb_ptp_rx_hang(adapter); /* Reset the timer */ if (!test_bit(__IGB_DOWN, &adapter->state)) diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 086af46..2ec53d7 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -429,6 +429,51 @@ static void igb_ptp_overflow_check(struct work_struct *work) } /** + * igb_ptp_rx_hang - detect error case when Rx timestamp registers latched + * @adapter: private network adapter structure + * + * This watchdog task is scheduled to detect error case where hardware has + * dropped an Rx packet that was timestamped when the ring is full. The + * particular error is rare but leaves the device in a state unable to timestamp + * any future packets. + */ +void igb_ptp_rx_hang(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_ring *rx_ring; + u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL); + unsigned long rx_event; + int n; + + if (hw->mac.type != e1000_82576) + return; + + /* If we don't have a valid timestamp in the registers, just update the + * timeout counter and exit + */ + if (!(tsyncrxctl & E1000_TSYNCRXCTL_VALID)) { + adapter->last_rx_ptp_check = jiffies; + return; + } + + /* Determine the most recent watchdog or rx_timestamp event */ + rx_event = adapter->last_rx_ptp_check; + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + if (time_after(rx_ring->last_rx_timestamp, rx_event)) + rx_event = rx_ring->last_rx_timestamp; + } + + /* Only need to read the high RXSTMP register to clear the lock */ + if (time_is_before_jiffies(rx_event + 5 * HZ)) { + rd32(E1000_RXSTMPH); + adapter->last_rx_ptp_check = jiffies; + adapter->rx_hwtstamp_cleared++; + dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang"); + } +} + +/** * igb_ptp_tx_hwtstamp - utility function which checks for TX time stamp * @adapter: Board private structure. * -- cgit v0.10.2 From badc26dd648cb3017affb834e9f79995e3911335 Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Thu, 13 Dec 2012 07:20:37 +0000 Subject: igb: Free any held skb that should have been timestamped on remove To prevent a race condition where an skb has been saved to return the Tx timestamp later and the driver is removed, add a check to determine if we have an skb stored and, if so, free it. Cc: Richard Cochran Signed-off-by: Matthew Vick Acked-by: Jacob Keller Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 2ec53d7..09f61a4 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -856,6 +856,10 @@ void igb_ptp_stop(struct igb_adapter *adapter) } cancel_work_sync(&adapter->ptp_tx_work); + if (adapter->ptp_tx_skb) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + } if (adapter->ptp_clock) { ptp_clock_unregister(adapter->ptp_clock); -- cgit v0.10.2 From ba59814b39b7ec674f604b0f9b35f1773f2fbf1a Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Thu, 13 Dec 2012 07:20:36 +0000 Subject: igb: Use in-kernel PTP_EV_PORT #define Rather than use an extra #define for something that already exists, use the kernel #define for the PTP port. Cc: Richard Cochran Signed-off-by: Matthew Vick Acked-by: Jacob Keller Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 09f61a4..0987822 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "igb.h" @@ -698,7 +699,6 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, else wr32(E1000_ETQF(3), 0); -#define PTP_PORT 319 /* L4 Queue Filter[3]: filter by destination port and protocol */ if (is_l4) { u32 ftqf = (IPPROTO_UDP /* UDP */ @@ -707,12 +707,12 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, | E1000_FTQF_MASK); /* mask all inputs */ ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */ - wr32(E1000_IMIR(3), htons(PTP_PORT)); + wr32(E1000_IMIR(3), htons(PTP_EV_PORT)); wr32(E1000_IMIREXT(3), (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP)); if (hw->mac.type == e1000_82576) { /* enable source port check */ - wr32(E1000_SPQF(3), htons(PTP_PORT)); + wr32(E1000_SPQF(3), htons(PTP_EV_PORT)); ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP; } wr32(E1000_FTQF(3), ftqf); -- cgit v0.10.2 From 5620df65d81292c5fb1beba8d380ef58cd98b53f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 16 Jan 2013 04:24:06 +0000 Subject: net: asix: init ASIX AX88772B MAC from EEPROM The device comes up with a MAC address of all zeros. We need to read the initial device MAC from EEPROM so it can be set properly later. Signed-off-by: Lucas Stach Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index e889631..7afe8ac 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -167,6 +167,9 @@ struct asix_data { u8 res; }; +/* ASIX specific flags */ +#define FLAG_EEPROM_MAC (1UL << 0) /* init device MAC from eeprom */ + int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, u16 size, void *data); diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 7a6e758..0ecc3bc 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -422,14 +422,25 @@ static const struct net_device_ops ax88772_netdev_ops = { static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { - int ret, embd_phy; + int ret, embd_phy, i; u8 buf[ETH_ALEN]; u32 phyid; usbnet_get_endpoints(dev,intf); /* Get the MAC address */ - ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (dev->driver_info->data & FLAG_EEPROM_MAC) { + for (i = 0; i < (ETH_ALEN >> 1); i++) { + ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i, + 0, 2, buf + i * 2); + if (ret < 0) + break; + } + } else { + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, + 0, 0, ETH_ALEN, buf); + } + if (ret < 0) { netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); return ret; @@ -872,6 +883,19 @@ static const struct driver_info ax88772_info = { .tx_fixup = asix_tx_fixup, }; +static const struct driver_info ax88772b_info = { + .description = "ASIX AX88772B USB 2.0 Ethernet", + .bind = ax88772_bind, + .status = asix_status, + .link_reset = ax88772_link_reset, + .reset = ax88772_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | + FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, + .data = FLAG_EEPROM_MAC, +}; + static const struct driver_info ax88178_info = { .description = "ASIX AX88178 USB 2.0 Ethernet", .bind = ax88178_bind, @@ -953,7 +977,7 @@ static const struct usb_device_id products [] = { }, { // ASIX AX88772B 10/100 USB_DEVICE (0x0b95, 0x772b), - .driver_info = (unsigned long) &ax88772_info, + .driver_info = (unsigned long) &ax88772b_info, }, { // ASIX AX88772 10/100 USB_DEVICE (0x0b95, 0x7720), -- cgit v0.10.2 From 8b5b6f5413e97c3e8bafcdd67553d508f4f698cd Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 16 Jan 2013 04:24:07 +0000 Subject: net: asix: handle packets crossing URB boundaries ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet header may now cross URB boundaries. To handle this we have to introduce some state between individual calls to asix_rx_fixup(). Signed-off-by: Lucas Stach Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index 7afe8ac..346c032 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -167,6 +167,17 @@ struct asix_data { u8 res; }; +struct asix_rx_fixup_info { + struct sk_buff *ax_skb; + u32 header; + u16 size; + bool split_head; +}; + +struct asix_common_private { + struct asix_rx_fixup_info rx_fixup_info; +}; + /* ASIX specific flags */ #define FLAG_EEPROM_MAC (1UL << 0) /* init device MAC from eeprom */ @@ -179,7 +190,9 @@ int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, u16 size, void *data); -int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb); +int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb, + struct asix_rx_fixup_info *rx); +int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb); struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags); diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 19bc23f..f7f623a 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -51,49 +51,89 @@ void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, value, index, data, size); } -int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb, + struct asix_rx_fixup_info *rx) { int offset = 0; - while (offset + sizeof(u32) < skb->len) { - struct sk_buff *ax_skb; - u16 size; - u32 header = get_unaligned_le32(skb->data + offset); - - offset += sizeof(u32); - - /* get the packet length */ - size = (u16) (header & 0x7ff); - if (size != ((~header >> 16) & 0x07ff)) { - netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); - return 0; + while (offset + sizeof(u16) <= skb->len) { + u16 remaining = 0; + unsigned char *data; + + if (!rx->size) { + if ((skb->len - offset == sizeof(u16)) || + rx->split_head) { + if(!rx->split_head) { + rx->header = get_unaligned_le16( + skb->data + offset); + rx->split_head = true; + offset += sizeof(u16); + break; + } else { + rx->header |= (get_unaligned_le16( + skb->data + offset) + << 16); + rx->split_head = false; + offset += sizeof(u16); + } + } else { + rx->header = get_unaligned_le32(skb->data + + offset); + offset += sizeof(u32); + } + + /* get the packet length */ + rx->size = (u16) (rx->header & 0x7ff); + if (rx->size != ((~rx->header >> 16) & 0x7ff)) { + netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n", + rx->header, offset); + rx->size = 0; + return 0; + } + rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, + rx->size); + if (!rx->ax_skb) + return 0; } - if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || - (size + offset > skb->len)) { + if (rx->size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) { netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", - size); + rx->size); + kfree_skb(rx->ax_skb); return 0; } - ax_skb = netdev_alloc_skb_ip_align(dev->net, size); - if (!ax_skb) - return 0; - skb_put(ax_skb, size); - memcpy(ax_skb->data, skb->data + offset, size); - usbnet_skb_return(dev, ax_skb); + if (rx->size > skb->len - offset) { + remaining = rx->size - (skb->len - offset); + rx->size = skb->len - offset; + } + + data = skb_put(rx->ax_skb, rx->size); + memcpy(data, skb->data + offset, rx->size); + if (!remaining) + usbnet_skb_return(dev, rx->ax_skb); - offset += (size + 1) & 0xfffe; + offset += (rx->size + 1) & 0xfffe; + rx->size = remaining; } if (skb->len != offset) { - netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", - skb->len); + netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n", + skb->len, offset); return 0; } + return 1; } +int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb) +{ + struct asix_common_private *dp = dev->driver_priv; + struct asix_rx_fixup_info *rx = &dp->rx_fixup_info; + + return asix_rx_fixup_internal(dev, skb, rx); +} + struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 0ecc3bc..37de7db 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -495,9 +495,19 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->rx_urb_size = 2048; } + dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL); + if (!dev->driver_priv) + return -ENOMEM; + return 0; } +void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + if (dev->driver_priv) + kfree(dev->driver_priv); +} + static const struct ethtool_ops ax88178_ethtool_ops = { .get_drvinfo = asix_get_drvinfo, .get_link = asix_get_link, @@ -829,6 +839,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) dev->rx_urb_size = 2048; } + dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL); + if (!dev->driver_priv) + return -ENOMEM; + return 0; } @@ -875,23 +889,25 @@ static const struct driver_info hawking_uf200_info = { static const struct driver_info ax88772_info = { .description = "ASIX AX88772 USB 2.0 Ethernet", .bind = ax88772_bind, + .unbind = ax88772_unbind, .status = asix_status, .link_reset = ax88772_link_reset, .reset = ax88772_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, - .rx_fixup = asix_rx_fixup, + .rx_fixup = asix_rx_fixup_common, .tx_fixup = asix_tx_fixup, }; static const struct driver_info ax88772b_info = { .description = "ASIX AX88772B USB 2.0 Ethernet", .bind = ax88772_bind, + .unbind = ax88772_unbind, .status = asix_status, .link_reset = ax88772_link_reset, .reset = ax88772_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, - .rx_fixup = asix_rx_fixup, + .rx_fixup = asix_rx_fixup_common, .tx_fixup = asix_tx_fixup, .data = FLAG_EEPROM_MAC, }; @@ -899,11 +915,12 @@ static const struct driver_info ax88772b_info = { static const struct driver_info ax88178_info = { .description = "ASIX AX88178 USB 2.0 Ethernet", .bind = ax88178_bind, + .unbind = ax88772_unbind, .status = asix_status, .link_reset = ax88178_link_reset, .reset = ax88178_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR, - .rx_fixup = asix_rx_fixup, + .rx_fixup = asix_rx_fixup_common, .tx_fixup = asix_tx_fixup, }; diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index fdbab72..76ee541 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -35,6 +35,7 @@ struct ax88172a_private { u16 phy_addr; u16 oldmode; int use_embdphy; + struct asix_rx_fixup_info rx_fixup_info; }; /* MDIO read and write wrappers for phylib */ @@ -400,6 +401,14 @@ out: } +static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + struct ax88172a_private *dp = dev->driver_priv; + struct asix_rx_fixup_info *rx = &dp->rx_fixup_info; + + return asix_rx_fixup_internal(dev, skb, rx); +} + const struct driver_info ax88172a_info = { .description = "ASIX AX88172A USB 2.0 Ethernet", .bind = ax88172a_bind, @@ -409,6 +418,6 @@ const struct driver_info ax88172a_info = { .status = ax88172a_status, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, - .rx_fixup = asix_rx_fixup, + .rx_fixup = ax88172a_rx_fixup, .tx_fixup = asix_tx_fixup, }; -- cgit v0.10.2 From baa70a5c48a01ea02e32270eb96eb19bd3b76667 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Wed, 16 Jan 2013 16:55:58 +0000 Subject: net: fec: enable pause frame to improve rx prefomance for 1G network The limition of imx6 internal bus cause fec can't achieve 1G perfomance. There will be many packages lost because FIFO over run. This patch enable pause frame flow control. Before this patch iperf -s -i 1 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49773 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 6.35 MBytes 53.3 Mbits/sec [ 4] 1.0- 2.0 sec 3.39 MBytes 28.5 Mbits/sec [ 4] 2.0- 3.0 sec 2.63 MBytes 22.1 Mbits/sec [ 4] 3.0- 4.0 sec 1.10 MBytes 9.23 Mbits/sec ifconfig RX packets:46195 errors:1859 dropped:1 overruns:1859 frame:1859 After this patch iperf -s -i 1 [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49757 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 49.8 MBytes 418 Mbits/sec [ 4] 1.0- 2.0 sec 50.1 MBytes 420 Mbits/sec [ 4] 2.0- 3.0 sec 47.5 MBytes 399 Mbits/sec [ 4] 3.0- 4.0 sec 45.9 MBytes 385 Mbits/sec [ 4] 4.0- 5.0 sec 44.8 MBytes 376 Mbits/sec ifconfig RX packets:2348454 errors:0 dropped:16 overruns:0 frame:0 Signed-off-by: Frank Li Signed-off-by: Fugang Duan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 1b7684a..f52ba33 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -68,6 +68,14 @@ #define DRIVER_NAME "fec" +/* Pause frame feild and FIFO threshold */ +#define FEC_ENET_FCE (1 << 5) +#define FEC_ENET_RSEM_V 0x84 +#define FEC_ENET_RSFL_V 16 +#define FEC_ENET_RAEM_V 0x8 +#define FEC_ENET_RAFL_V 0x8 +#define FEC_ENET_OPD_V 0xFFF0 + /* Controller is ENET-MAC */ #define FEC_QUIRK_ENET_MAC (1 << 0) /* Controller needs driver to swap frame */ @@ -193,6 +201,9 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); /* Transmitter timeout */ #define TX_TIMEOUT (2 * HZ) +#define FEC_PAUSE_FLAG_AUTONEG 0x1 +#define FEC_PAUSE_FLAG_ENABLE 0x2 + static int mii_cnt; static struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, int is_ex) @@ -470,6 +481,25 @@ fec_restart(struct net_device *ndev, int duplex) } #endif } + + /* enable pause frame*/ + if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) || + ((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) && + fep->phy_dev && fep->phy_dev->pause)) { + rcntl |= FEC_ENET_FCE; + + /* set FIFO thresh hold parameter to reduce overrun */ + writel(FEC_ENET_RSEM_V, fep->hwp + FEC_R_FIFO_RSEM); + writel(FEC_ENET_RSFL_V, fep->hwp + FEC_R_FIFO_RSFL); + writel(FEC_ENET_RAEM_V, fep->hwp + FEC_R_FIFO_RAEM); + writel(FEC_ENET_RAFL_V, fep->hwp + FEC_R_FIFO_RAFL); + + /* OPD */ + writel(FEC_ENET_OPD_V, fep->hwp + FEC_OPD); + } else { + rcntl &= ~FEC_ENET_FCE; + } + writel(rcntl, fep->hwp + FEC_R_CNTRL); if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { @@ -1016,8 +1046,10 @@ static int fec_enet_mii_probe(struct net_device *ndev) } /* mask with MAC supported features */ - if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) + if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) { phy_dev->supported &= PHY_GBIT_FEATURES; + phy_dev->supported |= SUPPORTED_Pause; + } else phy_dev->supported &= PHY_BASIC_FEATURES; @@ -1203,7 +1235,55 @@ static int fec_enet_get_ts_info(struct net_device *ndev, } } +static void fec_enet_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pause) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + pause->autoneg = (fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) != 0; + pause->tx_pause = (fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) != 0; + pause->rx_pause = pause->tx_pause; +} + +static int fec_enet_set_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pause) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + if (pause->tx_pause != pause->rx_pause) { + netdev_info(ndev, + "hardware only support enable/disable both tx and rx"); + return -EINVAL; + } + + fep->pause_flag = 0; + + /* tx pause must be same as rx pause */ + fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0; + fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0; + + if (pause->rx_pause || pause->autoneg) { + fep->phy_dev->supported |= ADVERTISED_Pause; + fep->phy_dev->advertising |= ADVERTISED_Pause; + } else { + fep->phy_dev->supported &= ~ADVERTISED_Pause; + fep->phy_dev->advertising &= ~ADVERTISED_Pause; + } + + if (pause->autoneg) { + if (netif_running(ndev)) + fec_stop(ndev); + phy_start_aneg(fep->phy_dev); + } + if (netif_running(ndev)) + fec_restart(ndev, 0); + + return 0; +} + static const struct ethtool_ops fec_enet_ethtool_ops = { + .get_pauseparam = fec_enet_get_pauseparam, + .set_pauseparam = fec_enet_set_pauseparam, .get_settings = fec_enet_get_settings, .set_settings = fec_enet_set_settings, .get_drvinfo = fec_enet_get_drvinfo, @@ -1643,6 +1723,11 @@ fec_probe(struct platform_device *pdev) /* setup board info structure */ fep = netdev_priv(ndev); + /* default enable pause frame auto negotiation */ + if (pdev->id_entry && + (pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT)) + fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG; + fep->hwp = ioremap(r->start, resource_size(r)); fep->pdev = pdev; fep->dev_id = dev_id++; diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 4862394..2ebedaf 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -48,6 +48,10 @@ #define FEC_R_DES_START 0x180 /* Receive descriptor ring */ #define FEC_X_DES_START 0x184 /* Transmit descriptor ring */ #define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */ +#define FEC_R_FIFO_RSFL 0x190 /* Receive FIFO section full threshold */ +#define FEC_R_FIFO_RSEM 0x194 /* Receive FIFO section empty threshold */ +#define FEC_R_FIFO_RAEM 0x198 /* Receive FIFO almost empty threshold */ +#define FEC_R_FIFO_RAFL 0x19c /* Receive FIFO almost full threshold */ #define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */ #define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */ @@ -243,6 +247,7 @@ struct fec_enet_private { struct completion mdio_done; int irq[FEC_IRQ_NUM]; int bufdesc_ex; + int pause_flag; struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_caps; -- cgit v0.10.2 From 0c446212c4f68e51ba03a9b172599437d6660a9d Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Wed, 16 Jan 2013 19:09:47 +0000 Subject: 6lowpan: Refactor packet delivery into a function Refactor the handing of the skb's to the individual lowpan devices into a function. Signed-off-by: Alan Ott Signed-off-by: David S. Miller diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index f651da6..1714cfa 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -594,10 +594,32 @@ static int lowpan_header_create(struct sk_buff *skb, } } +static int lowpan_give_skb_to_devices(struct sk_buff *skb) +{ + struct lowpan_dev_record *entry; + struct sk_buff *skb_cp; + int stat = NET_RX_SUCCESS; + + rcu_read_lock(); + list_for_each_entry_rcu(entry, &lowpan_devices, list) + if (lowpan_dev_info(entry->ldev)->real_dev == skb->dev) { + skb_cp = skb_copy(skb, GFP_ATOMIC); + if (!skb_cp) { + stat = -ENOMEM; + break; + } + + skb_cp->dev = entry->ldev; + stat = netif_rx(skb_cp); + } + rcu_read_unlock(); + + return stat; +} + static int lowpan_skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr) { struct sk_buff *new; - struct lowpan_dev_record *entry; int stat = NET_RX_SUCCESS; new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb), @@ -614,19 +636,7 @@ static int lowpan_skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr) new->protocol = htons(ETH_P_IPV6); new->pkt_type = PACKET_HOST; - rcu_read_lock(); - list_for_each_entry_rcu(entry, &lowpan_devices, list) - if (lowpan_dev_info(entry->ldev)->real_dev == new->dev) { - skb = skb_copy(new, GFP_ATOMIC); - if (!skb) { - stat = -ENOMEM; - break; - } - - skb->dev = entry->ldev; - stat = netif_rx(skb); - } - rcu_read_unlock(); + stat = lowpan_give_skb_to_devices(new); kfree_skb(new); -- cgit v0.10.2 From ee21c7e0d1f6e742e9f441f580a3bac316a39a21 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Wed, 16 Jan 2013 19:09:48 +0000 Subject: 6lowpan: Handle uncompressed IPv6 packets over 6LoWPAN Handle the reception of uncompressed packets (dispatch type = IPv6). Signed-off-by: Alan Ott Signed-off-by: David S. Miller diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index 1714cfa..09cba81 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1147,19 +1147,42 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *dev, goto drop; /* check that it's our buffer */ - switch (skb->data[0] & 0xe0) { - case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */ - case LOWPAN_DISPATCH_FRAG1: /* first fragment header */ - case LOWPAN_DISPATCH_FRAGN: /* next fragments headers */ - local_skb = skb_clone(skb, GFP_ATOMIC); + if (skb->data[0] == LOWPAN_DISPATCH_IPV6) { + /* Copy the packet so that the IPv6 header is + * properly aligned. + */ + local_skb = skb_copy_expand(skb, NET_SKB_PAD - 1, + skb_tailroom(skb), GFP_ATOMIC); if (!local_skb) goto drop; - lowpan_process_data(local_skb); + local_skb->protocol = htons(ETH_P_IPV6); + local_skb->pkt_type = PACKET_HOST; + + /* Pull off the 1-byte of 6lowpan header. */ + skb_pull(local_skb, 1); + skb_reset_network_header(local_skb); + skb_set_transport_header(local_skb, sizeof(struct ipv6hdr)); + + lowpan_give_skb_to_devices(local_skb); + + kfree_skb(local_skb); kfree_skb(skb); - break; - default: - break; + } else { + switch (skb->data[0] & 0xe0) { + case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */ + case LOWPAN_DISPATCH_FRAG1: /* first fragment header */ + case LOWPAN_DISPATCH_FRAGN: /* next fragments headers */ + local_skb = skb_clone(skb, GFP_ATOMIC); + if (!local_skb) + goto drop; + lowpan_process_data(local_skb); + + kfree_skb(skb); + break; + default: + break; + } } return NET_RX_SUCCESS; -- cgit v0.10.2 From fae50823d0ee579e006a7ba2b20880e354388b25 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Thu, 17 Jan 2013 06:31:34 +0000 Subject: net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors When there is heavy transmission traffic in the CPDMA, then Rx descriptors memory is also utilized as tx desc memory looses all rx descriptors and the driver stops working then. This patch adds boundary for tx and rx descriptors in bd ram dividing the descriptor memory to ensure that during heavy transmission tx doesn't use rx descriptors. This patch is already applied to davinci_emac driver, since CPSW and davici_dmac shares the same CPDMA, moving the boundry seperation from Davinci EMAC driver to CPDMA driver which was done in the following commit commit 86d8c07ff2448eb4e860e50f34ef6ee78e45c40c Author: Sascha Hauer Date: Tue Jan 3 05:27:47 2012 +0000 net/davinci: do not use all descriptors for tx packets The driver uses a shared pool for both rx and tx descriptors. During open it queues fixed number of 128 descriptors for receive packets. For each received packet it tries to queue another descriptor. If this fails the descriptor is lost for rx. The driver has no limitation on tx descriptors to use, so it can happen during a nmap / ping -f attack that the driver allocates all descriptors for tx and looses all rx descriptors. The driver stops working then. To fix this limit the number of tx descriptors used to half of the descriptors available, the rx path uses the other half. Tested on a custom board using nmap / ping -f to the board from two different hosts. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 3772804..b35e6a7 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -374,6 +374,9 @@ void cpsw_tx_handler(void *token, int len, int status) struct net_device *ndev = skb->dev; struct cpsw_priv *priv = netdev_priv(ndev); + /* Check whether the queue is stopped due to stalled tx dma, if the + * queue is stopped then start the queue as we have free desc for tx + */ if (unlikely(netif_queue_stopped(ndev))) netif_start_queue(ndev); cpts_tx_timestamp(&priv->cpts, skb); @@ -736,6 +739,12 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, goto fail; } + /* If there is no more tx desc left free then we need to + * tell the kernel to stop sending us tx frames. + */ + if (unlikely(cpdma_check_free_tx_desc(priv->txch))) + netif_stop_queue(ndev); + return NETDEV_TX_OK; fail: priv->stats.tx_dropped++; diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 4995673..f862918 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -105,13 +105,13 @@ struct cpdma_ctlr { }; struct cpdma_chan { + struct cpdma_desc __iomem *head, *tail; + void __iomem *hdp, *cp, *rxfree; enum cpdma_state state; struct cpdma_ctlr *ctlr; int chan_num; spinlock_t lock; - struct cpdma_desc __iomem *head, *tail; int count; - void __iomem *hdp, *cp, *rxfree; u32 mask; cpdma_handler_fn handler; enum dma_data_direction dir; @@ -217,17 +217,27 @@ desc_from_phys(struct cpdma_desc_pool *pool, dma_addr_t dma) } static struct cpdma_desc __iomem * -cpdma_desc_alloc(struct cpdma_desc_pool *pool, int num_desc) +cpdma_desc_alloc(struct cpdma_desc_pool *pool, int num_desc, bool is_rx) { unsigned long flags; int index; + int desc_start; + int desc_end; struct cpdma_desc __iomem *desc = NULL; spin_lock_irqsave(&pool->lock, flags); - index = bitmap_find_next_zero_area(pool->bitmap, pool->num_desc, 0, - num_desc, 0); - if (index < pool->num_desc) { + if (is_rx) { + desc_start = 0; + desc_end = pool->num_desc/2; + } else { + desc_start = pool->num_desc/2; + desc_end = pool->num_desc; + } + + index = bitmap_find_next_zero_area(pool->bitmap, + desc_end, desc_start, num_desc, 0); + if (index < desc_end) { bitmap_set(pool->bitmap, index, num_desc); desc = pool->iomap + pool->desc_size * index; pool->used_desc++; @@ -668,7 +678,7 @@ int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, goto unlock_ret; } - desc = cpdma_desc_alloc(ctlr->pool, 1); + desc = cpdma_desc_alloc(ctlr->pool, 1, is_rx_chan(chan)); if (!desc) { chan->stats.desc_alloc_fail++; ret = -ENOMEM; @@ -704,6 +714,29 @@ unlock_ret: } EXPORT_SYMBOL_GPL(cpdma_chan_submit); +bool cpdma_check_free_tx_desc(struct cpdma_chan *chan) +{ + unsigned long flags; + int index; + bool ret; + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc_pool *pool = ctlr->pool; + + spin_lock_irqsave(&pool->lock, flags); + + index = bitmap_find_next_zero_area(pool->bitmap, + pool->num_desc, pool->num_desc/2, 1, 0); + + if (index < pool->num_desc) + ret = true; + else + ret = false; + + spin_unlock_irqrestore(&pool->lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(cpdma_check_free_tx_desc); + static void __cpdma_chan_free(struct cpdma_chan *chan, struct cpdma_desc __iomem *desc, int outlen, int status) diff --git a/drivers/net/ethernet/ti/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h index afa19a0..8d2aeb2 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.h +++ b/drivers/net/ethernet/ti/davinci_cpdma.h @@ -88,6 +88,7 @@ int cpdma_chan_process(struct cpdma_chan *chan, int quota); int cpdma_ctlr_int_ctrl(struct cpdma_ctlr *ctlr, bool enable); void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr); int cpdma_chan_int_ctrl(struct cpdma_chan *chan, bool enable); +bool cpdma_check_free_tx_desc(struct cpdma_chan *chan); enum cpdma_control { CPDMA_CMD_IDLE, /* write-only */ diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 8478d98..1c97c81 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -120,7 +120,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DEF_TX_CH (0) /* Default 0th channel */ #define EMAC_DEF_RX_CH (0) /* Default 0th channel */ #define EMAC_DEF_RX_NUM_DESC (128) -#define EMAC_DEF_TX_NUM_DESC (128) #define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ #define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ #define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ @@ -342,7 +341,6 @@ struct emac_priv { u32 mac_hash2; u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; u32 rx_addr_type; - atomic_t cur_tx; const char *phy_id; #ifdef CONFIG_OF struct device_node *phy_node; @@ -1050,10 +1048,10 @@ static void emac_tx_handler(void *token, int len, int status) { struct sk_buff *skb = token; struct net_device *ndev = skb->dev; - struct emac_priv *priv = netdev_priv(ndev); - - atomic_dec(&priv->cur_tx); + /* Check whether the queue is stopped due to stalled tx dma, if the + * queue is stopped then start the queue as we have free desc for tx + */ if (unlikely(netif_queue_stopped(ndev))) netif_start_queue(ndev); ndev->stats.tx_packets++; @@ -1101,7 +1099,10 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) goto fail_tx; } - if (atomic_inc_return(&priv->cur_tx) >= EMAC_DEF_TX_NUM_DESC) + /* If there is no more tx desc left free then we need to + * tell the kernel to stop sending us tx frames. + */ + if (unlikely(cpdma_check_free_tx_desc(priv->txch))) netif_stop_queue(ndev); return NETDEV_TX_OK; -- cgit v0.10.2 From 15c8bb1284c2e4b0614274602f0d92c4ea3412df Mon Sep 17 00:00:00 2001 From: Simon Que Date: Thu, 17 Jan 2013 09:29:49 +0000 Subject: net: usb: initialize tmp in dm9601.c to avoid warning In two places, tmp is initialized implicitly by being passed as a pointer during a function call. However, this is not obvious to the compiler, which logs a warning. Signed-off-by: Simon Que Acked-by: Peter Korsgaard Signed-off-by: David S. Miller diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 3f554c1..0794004 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -122,7 +122,7 @@ static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *valu dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4); for (i = 0; i < DM_TIMEOUT; i++) { - u8 tmp; + u8 tmp = 0; udelay(1); ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp); @@ -165,7 +165,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12); for (i = 0; i < DM_TIMEOUT; i++) { - u8 tmp; + u8 tmp = 0; udelay(1); ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp); -- cgit v0.10.2 From 6b80778d3d7424b8f0a45052742d065ec491abd8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 17 Jan 2013 16:46:02 +0000 Subject: smsc: smc911x: Fix sparse warnings ioremap returns 'void __iomem *' type. Fix the following build warnings: drivers/net/ethernet/smsc/smc911x.c:2079:14: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/smsc/smc911x.c:2079:14: expected unsigned int *addr drivers/net/ethernet/smsc/smc911x.c:2079:14: got void [noderef] * drivers/net/ethernet/smsc/smc911x.c:2086:18: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/smsc/smc911x.c:2086:18: expected void [noderef] *base drivers/net/ethernet/smsc/smc911x.c:2086:18: got unsigned int *addr drivers/net/ethernet/smsc/smc911x.c:2091:25: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/smsc/smc911x.c:2091:25: expected void volatile [noderef] *addr drivers/net/ethernet/smsc/smc911x.c:2091:25: got unsigned int *addr Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c index 1538d54..9dd842d 100644 --- a/drivers/net/ethernet/smsc/smc911x.c +++ b/drivers/net/ethernet/smsc/smc911x.c @@ -2036,7 +2036,7 @@ static int smc911x_drv_probe(struct platform_device *pdev) struct net_device *ndev; struct resource *res; struct smc911x_local *lp; - unsigned int *addr; + void __iomem *addr; int ret; DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); -- cgit v0.10.2 From 4505f40a6f1a6a1bb8f8ef84a4a35263d64b5125 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 17 Jan 2013 21:46:18 +0000 Subject: enic: change sprintf() to snprintf() These are copying data into 16 char arrays. They all specify that the first string can't be more than 11 characters but once you add on the "-rx-" and the NUL character there isn't space for the %d. The first string is probably never going to be 11 characters, but if it is then let's truncate the string instead of corrupting memory. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index ebccebf..ec1a233 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1490,7 +1490,8 @@ static int enic_request_intr(struct enic *enic) for (i = 0; i < enic->rq_count; i++) { intr = enic_msix_rq_intr(enic, i); - sprintf(enic->msix[intr].devname, + snprintf(enic->msix[intr].devname, + sizeof(enic->msix[intr].devname), "%.11s-rx-%d", netdev->name, i); enic->msix[intr].isr = enic_isr_msix_rq; enic->msix[intr].devid = &enic->napi[i]; @@ -1498,20 +1499,23 @@ static int enic_request_intr(struct enic *enic) for (i = 0; i < enic->wq_count; i++) { intr = enic_msix_wq_intr(enic, i); - sprintf(enic->msix[intr].devname, + snprintf(enic->msix[intr].devname, + sizeof(enic->msix[intr].devname), "%.11s-tx-%d", netdev->name, i); enic->msix[intr].isr = enic_isr_msix_wq; enic->msix[intr].devid = enic; } intr = enic_msix_err_intr(enic); - sprintf(enic->msix[intr].devname, + snprintf(enic->msix[intr].devname, + sizeof(enic->msix[intr].devname), "%.11s-err", netdev->name); enic->msix[intr].isr = enic_isr_msix_err; enic->msix[intr].devid = enic; intr = enic_msix_notify_intr(enic); - sprintf(enic->msix[intr].devname, + snprintf(enic->msix[intr].devname, + sizeof(enic->msix[intr].devname), "%.11s-notify", netdev->name); enic->msix[intr].isr = enic_isr_msix_notify; enic->msix[intr].devid = enic; -- cgit v0.10.2 From 12fd84f4383b15b0a12cfd50b7c527cd55d6f101 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Fri, 18 Jan 2013 02:00:24 +0000 Subject: ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers. Because of rt->n removal, we do not need neigh argument any more. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 30cbb15..260f83f 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -103,7 +103,6 @@ extern struct rt6_info *rt6_lookup(struct net *net, int oif, int flags); extern struct dst_entry *icmp6_dst_alloc(struct net_device *dev, - struct neighbour *neigh, struct flowi6 *fl6); extern int icmp6_dst_gc(void); diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 8237ee1..587a845 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1391,7 +1391,7 @@ static void mld_sendpack(struct sk_buff *skb) icmpv6_flow_init(net->ipv6.igmp_sk, &fl6, ICMPV6_MLD2_REPORT, &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, skb->dev->ifindex); - dst = icmp6_dst_alloc(skb->dev, NULL, &fl6); + dst = icmp6_dst_alloc(skb->dev, &fl6); err = 0; if (IS_ERR(dst)) { @@ -1759,7 +1759,7 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type) icmpv6_flow_init(sk, &fl6, type, &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, skb->dev->ifindex); - dst = icmp6_dst_alloc(skb->dev, NULL, &fl6); + dst = icmp6_dst_alloc(skb->dev, &fl6); if (IS_ERR(dst)) { err = PTR_ERR(dst); goto err_out; diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 5733cd2..429622d 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -432,7 +432,6 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, } static void ndisc_send_skb(struct sk_buff *skb, struct net_device *dev, - struct neighbour *neigh, const struct in6_addr *daddr, const struct in6_addr *saddr, struct icmp6hdr *icmp6h) @@ -448,7 +447,7 @@ static void ndisc_send_skb(struct sk_buff *skb, struct net_device *dev, type = icmp6h->icmp6_type; icmpv6_flow_init(sk, &fl6, type, saddr, daddr, dev->ifindex); - dst = icmp6_dst_alloc(dev, neigh, &fl6); + dst = icmp6_dst_alloc(dev, &fl6); if (IS_ERR(dst)) { kfree_skb(skb); return; @@ -474,7 +473,6 @@ static void ndisc_send_skb(struct sk_buff *skb, struct net_device *dev, * Send a Neighbour Discover packet */ static void __ndisc_send(struct net_device *dev, - struct neighbour *neigh, const struct in6_addr *daddr, const struct in6_addr *saddr, struct icmp6hdr *icmp6h, const struct in6_addr *target, @@ -486,7 +484,7 @@ static void __ndisc_send(struct net_device *dev, if (!skb) return; - ndisc_send_skb(skb, dev, neigh, daddr, saddr, icmp6h); + ndisc_send_skb(skb, dev, daddr, saddr, icmp6h); } static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, @@ -521,8 +519,7 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, icmp6h.icmp6_solicited = solicited; icmp6h.icmp6_override = override; - __ndisc_send(dev, neigh, daddr, src_addr, - &icmp6h, solicited_addr, + __ndisc_send(dev, daddr, src_addr, &icmp6h, solicited_addr, inc_opt ? ND_OPT_TARGET_LL_ADDR : 0); } @@ -563,8 +560,7 @@ void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh, saddr = &addr_buf; } - __ndisc_send(dev, neigh, daddr, saddr, - &icmp6h, solicit, + __ndisc_send(dev, daddr, saddr, &icmp6h, solicit, !ipv6_addr_any(saddr) ? ND_OPT_SOURCE_LL_ADDR : 0); } @@ -598,8 +594,7 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr, } } #endif - __ndisc_send(dev, NULL, daddr, saddr, - &icmp6h, NULL, + __ndisc_send(dev, daddr, saddr, &icmp6h, NULL, send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0); } diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3a562a1..2d94d5a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1203,7 +1203,6 @@ static struct dst_entry *icmp6_dst_gc_list; static DEFINE_SPINLOCK(icmp6_dst_lock); struct dst_entry *icmp6_dst_alloc(struct net_device *dev, - struct neighbour *neigh, struct flowi6 *fl6) { struct dst_entry *dst; -- cgit v0.10.2 From 115b0aa6b444e8dd89b7f67b77b8c472763fbc1a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Fri, 18 Jan 2013 02:05:03 +0000 Subject: ndisc: Check NS message length before access. Check message length before accessing "target" field, as we do for other types. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 429622d..350f860 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -671,6 +671,11 @@ static void ndisc_recv_ns(struct sk_buff *skb) bool inc; int is_router = -1; + if (skb->len < sizeof(struct nd_msg)) { + ND_PRINTK(2, warn, "NS: packet too short\n"); + return; + } + if (ipv6_addr_is_multicast(&msg->target)) { ND_PRINTK(2, warn, "NS: multicast target address\n"); return; -- cgit v0.10.2 From 1ad759d8479b4b28f2a6c874d380066cf987b341 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Fri, 18 Jan 2013 09:18:17 +0000 Subject: ipv6: remove unneeded check to pskb_may_pull in ipip6_rcv This is already checked by the caller (tunnel64_rcv) and brings ipip6_rcv in line with ipip_rcv. Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index cfba99b..98fe536 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -592,15 +592,10 @@ out: static int ipip6_rcv(struct sk_buff *skb) { - const struct iphdr *iph; + const struct iphdr *iph = ip_hdr(skb); struct ip_tunnel *tunnel; int err; - if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) - goto out; - - iph = ip_hdr(skb); - tunnel = ipip6_tunnel_lookup(dev_net(skb->dev), skb->dev, iph->saddr, iph->daddr); if (tunnel != NULL) { -- cgit v0.10.2 From 0f19b41e223d787251c59137e61fc5145c13d1c4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 14 Jan 2013 16:39:07 +0100 Subject: mac80211: remove ARP filter enable/disable logic Depending on the driver, having ARP filtering for some addresses may be possible. Remove the logic that tracks whether ARP filter is enabled or not and give the driver the total number of addresses instead of the length of the list so it can make its own decision. Reviewed-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index f0fc8cd..e4b42f7 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -539,9 +539,8 @@ brcms_ops_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_ARP_FILTER) { /* Hardware ARP filter address list or state changed */ - brcms_err(core, "%s: arp filtering: enabled %s, count %d" - " (implement)\n", __func__, info->arp_filter_enabled ? - "true" : "false", info->arp_addr_cnt); + brcms_err(core, "%s: arp filtering: %d addresses" + " (implement)\n", __func__, info->arp_addr_cnt); } if (changed & BSS_CHANGED_QOS) { diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index ce6e62a..919ad70 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4113,8 +4113,7 @@ sta_not_found: wlvif->sta.qos = bss_conf->qos; WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS); - if (bss_conf->arp_addr_cnt == 1 && - bss_conf->arp_filter_enabled) { + if (bss_conf->arp_addr_cnt == 1 && bss_conf->assoc) { wlvif->ip_addr = addr; /* * The template should have been configured only upon diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e0825a9..679ad4b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -297,11 +297,9 @@ enum ieee80211_rssi_event { * may filter ARP queries targeted for other addresses than listed here. * The driver must allow ARP queries targeted for all address listed here * to pass through. An empty list implies no ARP queries need to pass. - * @arp_addr_cnt: Number of addresses currently on the list. - * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may - * filter ARP queries based on the @arp_addr_list, if disabled, the - * hardware must not perform any ARP filtering. Note, that the filter will - * be enabled also in promiscuous mode. + * @arp_addr_cnt: Number of addresses currently on the list. Note that this + * may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list + * array size), it's up to the driver what to do in that case. * @qos: This is a QoS-enabled BSS. * @idle: This interface is idle. There's also a global idle flag in the * hardware config which may be more appropriate depending on what @@ -338,8 +336,7 @@ struct ieee80211_bss_conf { u32 cqm_rssi_hyst; struct cfg80211_chan_def chandef; __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; - u8 arp_addr_cnt; - bool arp_filter_enabled; + int arp_addr_cnt; bool qos; bool idle; bool ps; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0fa44a9..b1fed54 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -747,8 +747,6 @@ struct ieee80211_sub_if_data { struct work_struct work; struct sk_buff_head skb_queue; - bool arp_filter_state; - u8 needed_rx_chains; enum ieee80211_smps_mode smps_mode; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 06fac29..0a36dc6 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1574,9 +1574,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, /* initialise type-independent data */ sdata->wdev.wiphy = local->hw.wiphy; sdata->local = local; -#ifdef CONFIG_INET - sdata->arp_filter_state = true; -#endif for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) skb_queue_head_init(&sdata->fragments[i].skb_list); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 39cfe8f..baf9720 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -349,27 +349,19 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, /* Copy the addresses to the bss_conf list */ ifa = idev->ifa_list; - while (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN && ifa) { - bss_conf->arp_addr_list[c] = ifa->ifa_address; + while (ifa) { + if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN) + bss_conf->arp_addr_list[c] = ifa->ifa_address; ifa = ifa->ifa_next; c++; } - /* If not all addresses fit the list, disable filtering */ - if (ifa) { - sdata->arp_filter_state = false; - c = 0; - } else { - sdata->arp_filter_state = true; - } bss_conf->arp_addr_cnt = c; /* Configure driver only if associated (which also implies it is up) */ - if (ifmgd->associated) { - bss_conf->arp_filter_enabled = sdata->arp_filter_state; + if (ifmgd->associated) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_ARP_FILTER); - } mutex_unlock(&ifmgd->mtx); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e930175..2d9ef20 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1465,10 +1465,8 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, bss_info_changed |= BSS_CHANGED_CQM; /* Enable ARP filtering */ - if (bss_conf->arp_filter_enabled != sdata->arp_filter_state) { - bss_conf->arp_filter_enabled = sdata->arp_filter_state; + if (bss_conf->arp_addr_cnt) bss_info_changed |= BSS_CHANGED_ARP_FILTER; - } ieee80211_bss_info_change_notify(sdata, bss_info_changed); @@ -1582,10 +1580,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&local->dynamic_ps_enable_work); /* Disable ARP filtering */ - if (sdata->vif.bss_conf.arp_filter_enabled) { - sdata->vif.bss_conf.arp_filter_enabled = false; + if (sdata->vif.bss_conf.arp_addr_cnt) changed |= BSS_CHANGED_ARP_FILTER; - } sdata->vif.bss_conf.qos = false; changed |= BSS_CHANGED_QOS; diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 9341b93..e9f9591 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -347,8 +347,11 @@ TRACE_EVENT(drv_bss_info_changed, __field(s32, cqm_rssi_hyst); __field(u32, channel_width); __field(u32, channel_cfreq1); - __dynamic_array(u32, arp_addr_list, info->arp_addr_cnt); - __field(bool, arp_filter_enabled); + __dynamic_array(u32, arp_addr_list, + info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ? + IEEE80211_BSS_ARP_ADDR_LIST_LEN : + info->arp_addr_cnt); + __field(int, arp_addr_cnt); __field(bool, qos); __field(bool, idle); __field(bool, ps); @@ -384,9 +387,11 @@ TRACE_EVENT(drv_bss_info_changed, __entry->cqm_rssi_hyst = info->cqm_rssi_hyst; __entry->channel_width = info->chandef.width; __entry->channel_cfreq1 = info->chandef.center_freq1; + __entry->arp_addr_cnt = info->arp_addr_cnt; memcpy(__get_dynamic_array(arp_addr_list), info->arp_addr_list, - sizeof(u32) * info->arp_addr_cnt); - __entry->arp_filter_enabled = info->arp_filter_enabled; + sizeof(u32) * (info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ? + IEEE80211_BSS_ARP_ADDR_LIST_LEN : + info->arp_addr_cnt)); __entry->qos = info->qos; __entry->idle = info->idle; __entry->ps = info->ps; -- cgit v0.10.2 From 0a214d3f7e5041685ebff054628a4354bedd78c3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 16 Jan 2013 10:39:44 +0100 Subject: mac80211: improve aggregation debug messages A lot of the aggregation messages don't indicate the station so they're hard to understand if there are multiple sessions in progress. Make that easier by adding the MAC address to most messages. Also add the TID if it wasn't already there. Signed-off-by: Johannes Berg diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index 808338a..31bf258 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -83,8 +83,8 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP, &sta->sta, tid, NULL, 0)) sdata_info(sta->sdata, - "HW problem - can not stop rx aggregation for tid %d\n", - tid); + "HW problem - can not stop rx aggregation for %pM tid %d\n", + sta->sta.addr, tid); /* check if this is a self generated aggregation halt */ if (initiator == WLAN_BACK_RECIPIENT && tx) @@ -159,7 +159,8 @@ static void sta_rx_agg_session_timer_expired(unsigned long data) } rcu_read_unlock(); - ht_dbg(sta->sdata, "rx session timer expired on tid %d\n", (u16)*ptid); + ht_dbg(sta->sdata, "RX session timer expired on %pM tid %d\n", + sta->sta.addr, (u16)*ptid); set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired); ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work); @@ -247,7 +248,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, status = WLAN_STATUS_REQUEST_DECLINED; if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) { - ht_dbg(sta->sdata, "Suspend in progress - Denying ADDBA request\n"); + ht_dbg(sta->sdata, + "Suspend in progress - Denying ADDBA request (%pM tid %d)\n", + sta->sta.addr, tid); goto end_no_lock; } @@ -317,7 +320,8 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START, &sta->sta, tid, &start_seq_num, 0); - ht_dbg(sta->sdata, "Rx A-MPDU request on tid %d result %d\n", tid, ret); + ht_dbg(sta->sdata, "Rx A-MPDU request on %pM tid %d result %d\n", + sta->sta.addr, tid, ret); if (ret) { kfree(tid_agg_rx->reorder_buf); kfree(tid_agg_rx->reorder_time); diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 2f0ccbc..e909118 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -387,12 +387,13 @@ static void sta_addba_resp_timer_expired(unsigned long data) test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) { rcu_read_unlock(); ht_dbg(sta->sdata, - "timer expired on tid %d but we are not (or no longer) expecting addBA response there\n", - tid); + "timer expired on %pM tid %d but we are not (or no longer) expecting addBA response there\n", + sta->sta.addr, tid); return; } - ht_dbg(sta->sdata, "addBA response timer expired on tid %d\n", tid); + ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n", + sta->sta.addr, tid); ieee80211_stop_tx_ba_session(&sta->sta, tid); rcu_read_unlock(); @@ -429,7 +430,8 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) &sta->sta, tid, &start_seq_num, 0); if (ret) { ht_dbg(sdata, - "BA request denied - HW unavailable for tid %d\n", tid); + "BA request denied - HW unavailable for %pM tid %d\n", + sta->sta.addr, tid); spin_lock_bh(&sta->lock); ieee80211_agg_splice_packets(sdata, tid_tx, tid); ieee80211_assign_tid_tx(sta, tid, NULL); @@ -442,7 +444,8 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) /* activate the timer for the recipient's addBA response */ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL); - ht_dbg(sdata, "activated addBA response timer on tid %d\n", tid); + ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n", + sta->sta.addr, tid); spin_lock_bh(&sta->lock); sta->ampdu_mlme.last_addba_req_time[tid] = jiffies; @@ -489,7 +492,8 @@ static void sta_tx_agg_session_timer_expired(unsigned long data) rcu_read_unlock(); - ht_dbg(sta->sdata, "tx session timer expired on tid %d\n", (u16)*ptid); + ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n", + sta->sta.addr, (u16)*ptid); ieee80211_stop_tx_ba_session(&sta->sta, *ptid); } @@ -525,7 +529,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) { ht_dbg(sdata, - "BA sessions blocked - Denying BA session request\n"); + "BA sessions blocked - Denying BA session request %pM tid %d\n", + sta->sta.addr, tid); return -EINVAL; } @@ -566,8 +571,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] + HT_AGG_RETRIES_PERIOD)) { ht_dbg(sdata, - "BA request denied - waiting a grace period after %d failed requests on tid %u\n", - sta->ampdu_mlme.addba_req_num[tid], tid); + "BA request denied - waiting a grace period after %d failed requests on %pM tid %u\n", + sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid); ret = -EBUSY; goto err_unlock_sta; } @@ -576,8 +581,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, /* check if the TID is not in aggregation flow already */ if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) { ht_dbg(sdata, - "BA request denied - session is not idle on tid %u\n", - tid); + "BA request denied - session is not idle on %pM tid %u\n", + sta->sta.addr, tid); ret = -EAGAIN; goto err_unlock_sta; } @@ -632,7 +637,8 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local, tid_tx = rcu_dereference_protected_tid_tx(sta, tid); - ht_dbg(sta->sdata, "Aggregation is on for tid %d\n", tid); + ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n", + sta->sta.addr, tid); drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_TX_OPERATIONAL, @@ -802,7 +808,9 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) tid_tx = rcu_dereference_protected_tid_tx(sta, tid); if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { - ht_dbg(sdata, "unexpected callback to A-MPDU stop\n"); + ht_dbg(sdata, + "unexpected callback to A-MPDU stop for %pM tid %d\n", + sta->sta.addr, tid); goto unlock_sta; } @@ -861,13 +869,15 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, goto out; if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) { - ht_dbg(sta->sdata, "wrong addBA response token, tid %d\n", tid); + ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n", + sta->sta.addr, tid); goto out; } del_timer_sync(&tid_tx->addba_resp_timer); - ht_dbg(sta->sdata, "switched off addBA timer for tid %d\n", tid); + ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n", + sta->sta.addr, tid); /* * addba_resp_timer may have fired before we got here, and @@ -877,8 +887,8 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) || test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { ht_dbg(sta->sdata, - "got addBA resp for tid %d but we already gave up\n", - tid); + "got addBA resp for %pM tid %d but we already gave up\n", + sta->sta.addr, tid); goto out; } -- cgit v0.10.2 From a65240c1013222dbf41166c8b2c5ed2720c807c3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 14 Jan 2013 15:14:34 +0100 Subject: mac80211: allow drivers to access IPv6 information To be able to implement NS response offloading (in regular operation or while in WoWLAN) drivers need to know the IPv6 addresses assigned to interfaces. Implement an IPv6 notifier in mac80211 to call the driver when addresses change. Unlike for IPv4, implement it as a callback rather than as a list in the BSS configuration, that is more flexible. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 679ad4b..ece5733 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2497,6 +2497,9 @@ enum ieee80211_rate_control_changed { * driver's resume function returned 1, as this is just like an "inline" * hardware restart. This callback may sleep. * + * @ipv6_addr_change: IPv6 address assignment on the given interface changed. + * Currently, this is only called for managed or P2P client interfaces. + * This callback is optional; it must not sleep. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2672,6 +2675,12 @@ struct ieee80211_ops { struct ieee80211_chanctx_conf *ctx); void (*restart_complete)(struct ieee80211_hw *hw); + +#if IS_ENABLED(CONFIG_IPV6) + void (*ipv6_addr_change)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct inet6_dev *idev); +#endif }; /** diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index e6033b0..d51afbd 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -1036,4 +1036,16 @@ drv_set_default_unicast_key(struct ieee80211_local *local, trace_drv_return_void(local); } +#if IS_ENABLED(CONFIG_IPV6) +static inline void drv_ipv6_addr_change(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + struct inet6_dev *idev) +{ + trace_drv_ipv6_addr_change(local, sdata); + if (local->ops->ipv6_addr_change) + local->ops->ipv6_addr_change(&local->hw, &sdata->vif, idev); + trace_drv_return_void(local); +} +#endif + #endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index b1fed54..aec1b33 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1127,6 +1127,7 @@ struct ieee80211_local { struct timer_list dynamic_ps_timer; struct notifier_block network_latency_notifier; struct notifier_block ifa_notifier; + struct notifier_block ifa6_notifier; /* * The dynamic ps timeout configured from user space via WEXT - diff --git a/net/mac80211/main.c b/net/mac80211/main.c index baf9720..2bdd454 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "ieee80211_i.h" #include "driver-ops.h" @@ -369,6 +370,37 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, } #endif +#if IS_ENABLED(CONFIG_IPV6) +static int ieee80211_ifa6_changed(struct notifier_block *nb, + unsigned long data, void *arg) +{ + struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg; + struct inet6_dev *idev = ifa->idev; + struct net_device *ndev = ifa->idev->dev; + struct ieee80211_local *local = + container_of(nb, struct ieee80211_local, ifa6_notifier); + struct wireless_dev *wdev = ndev->ieee80211_ptr; + struct ieee80211_sub_if_data *sdata; + + /* Make sure it's our interface that got changed */ + if (!wdev || wdev->wiphy != local->hw.wiphy) + return NOTIFY_DONE; + + sdata = IEEE80211_DEV_TO_SUB_IF(ndev); + + /* + * For now only support station mode. This is mostly because + * doing AP would have to handle AP_VLAN in some way ... + */ + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return NOTIFY_DONE; + + drv_ipv6_addr_change(local, sdata, idev); + + return NOTIFY_DONE; +} +#endif + static int ieee80211_napi_poll(struct napi_struct *napi, int budget) { struct ieee80211_local *local = @@ -977,12 +1009,25 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_ifa; #endif +#if IS_ENABLED(CONFIG_IPV6) + local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; + result = register_inet6addr_notifier(&local->ifa6_notifier); + if (result) + goto fail_ifa6; +#endif + netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll, local->hw.napi_weight); return 0; +#if IS_ENABLED(CONFIG_IPV6) + fail_ifa6: #ifdef CONFIG_INET + unregister_inetaddr_notifier(&local->ifa_notifier); +#endif +#endif +#if defined(CONFIG_INET) || defined(CONFIG_IPV6) fail_ifa: pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, &local->network_latency_notifier); @@ -1018,6 +1063,9 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) #ifdef CONFIG_INET unregister_inetaddr_notifier(&local->ifa_notifier); #endif +#if IS_ENABLED(CONFIG_IPV6) + unregister_inet6addr_notifier(&local->ifa6_notifier); +#endif rtnl_lock(); diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index e9f9591..2a2c2e2 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1437,6 +1437,14 @@ DEFINE_EVENT(local_only_evt, drv_restart_complete, TP_ARGS(local) ); +#if IS_ENABLED(CONFIG_IPV6) +DEFINE_EVENT(local_sdata_evt, drv_ipv6_addr_change, + TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata), + TP_ARGS(local, sdata) +); +#endif + /* * Tracing for API calls that drivers call. */ -- cgit v0.10.2 From 610a63fc8ef903a11921bb48f26fd4d34aacd3c0 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Oct 2012 02:34:34 +0000 Subject: ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes IEEE DCBx has a mechanism to change the default user priority. In the normal case the OS can handle this via cgroups, iptables, socket, options etc. With SR-IOV and direct assigned VF devices the default priority needs to be set by the PF device so the inserted VLAN tag is correct. Signed-off-by: John Fastabend Tested-by: Phil Schmitt Tested-by: Marcus Dennis Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index f1e002d..6718fb4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -30,6 +30,7 @@ #include #include "ixgbe_dcb_82598.h" #include "ixgbe_dcb_82599.h" +#include "ixgbe_sriov.h" /* Callbacks for DCB netlink in the kernel */ #define BIT_DCB_MODE 0x01 @@ -643,9 +644,11 @@ static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev, return err; err = dcb_ieee_setapp(dev, app); + if (err) + return err; #ifdef IXGBE_FCOE - if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && app->protocol == ETH_P_FCOE) { u8 app_mask = dcb_ieee_getapp_mask(dev, app); @@ -656,6 +659,23 @@ static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev, ixgbe_dcbnl_devreset(dev); } #endif + + /* VF devices should use default UP when available */ + if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->protocol == 0) { + int vf; + + adapter->default_up = app->priority; + + for (vf = 0; vf < adapter->num_vfs; vf++) { + struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; + + if (!vfinfo->pf_qos) + ixgbe_set_vmvir(adapter, vfinfo->pf_vlan, + app->priority, vf); + } + } + return 0; } @@ -683,6 +703,24 @@ static int ixgbe_dcbnl_ieee_delapp(struct net_device *dev, ixgbe_dcbnl_devreset(dev); } #endif + /* IF default priority is being removed clear VF default UP */ + if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->protocol == 0 && adapter->default_up == app->priority) { + int vf; + long unsigned int app_mask = dcb_ieee_getapp_mask(dev, app); + int qos = app_mask ? find_first_bit(&app_mask, 8) : 0; + + adapter->default_up = qos; + + for (vf = 0; vf < adapter->num_vfs; vf++) { + struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; + + if (!vfinfo->pf_qos) + ixgbe_set_vmvir(adapter, vfinfo->pf_vlan, + qos, vf); + } + } + return err; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 85cddac..647734b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -447,15 +447,6 @@ static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); } -static void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, - u16 vid, u16 qos, u32 vf) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 vmvir = vid | (qos << VLAN_PRIO_SHIFT) | IXGBE_VMVIR_VLANA_DEFAULT; - - IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), vmvir); -} - static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf) { struct ixgbe_hw *hw = &adapter->hw; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index 1be1d30..21bc1dd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -47,6 +47,14 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, const struct ixgbe_info *ii); #endif +static inline void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, + u16 vid, u16 qos, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vmvir = vid | (qos << VLAN_PRIO_SHIFT) | IXGBE_VMVIR_VLANA_DEFAULT; + + IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), vmvir); +} #endif /* _IXGBE_SRIOV_H_ */ -- cgit v0.10.2 From 8f4fbb9bfc8f0eac8932d45f57e29507d5b631a3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 30 Oct 2012 06:01:40 +0000 Subject: ixgbe: Make TSO check for CHECKSUM_PARTIAL to avoid skb_is_gso check This change is meant to reduce the overhead for workloads that are not using either TSO or checksum offloads. Most of the time the compiler should jump ahead after failing this check to the VLAN check since in the ixgbe_tx_csum call we start with that check as well. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 20d6764..e197cc2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5899,6 +5899,9 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens, type_tucmd; u32 mss_l4len_idx, l4len; + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + if (!skb_is_gso(skb)) return 0; -- cgit v0.10.2 From c44f5f516e0b830f560ade66847433f88a4bcc3a Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 30 Oct 2012 06:01:45 +0000 Subject: ixgbe: Always use context 0, even for FCoE and TSO We were spending cycles separating the FCoE and TSO contexts even though we always overwriting the context anyway. Instead of doing that we can just use context 0 for all descriptors. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 252850d..c88aa1c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -550,9 +550,8 @@ int ixgbe_fso(struct ixgbe_ring *tx_ring, /* set flag indicating FCOE to ixgbe_tx_map call */ first->tx_flags |= IXGBE_TX_FLAGS_FCOE; - /* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */ + /* mss_l4len_id: use 0 for FSO as TSO, no need for L4LEN */ mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; - mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ vlan_macip_lens = skb_transport_offset(skb) + diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index e197cc2..2e2bf33 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5944,10 +5944,9 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring, first->gso_segs = skb_shinfo(skb)->gso_segs; first->bytecount += (first->gso_segs - 1) * *hdr_len; - /* mss_l4len_id: use 1 as index for TSO */ + /* mss_l4len_id: use 0 as index for TSO */ mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT; mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; - mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ vlan_macip_lens = skb_network_header_len(skb); @@ -6073,14 +6072,6 @@ static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc, if (tx_flags & IXGBE_TX_FLAGS_IPV4) olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM); - /* use index 1 context for TSO/FSO/FCOE */ -#ifdef IXGBE_FCOE - if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FCOE)) -#else - if (tx_flags & IXGBE_TX_FLAGS_TSO) -#endif - olinfo_status |= cpu_to_le32(1 << IXGBE_ADVTXD_IDX_SHIFT); - /* * Check Context must be set if Tx switch is enabled, which it * always is for case where virtual functions are running -- cgit v0.10.2 From 472148c320c0d11245932ba1315bc4ec0667ed57 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 7 Nov 2012 02:34:28 +0000 Subject: ixgbe: Update ixgbe Tx flags to improve code efficiency This change is meant to improve the efficiency of the Tx flags in ixgbe by aligning them with the values that will later be written into either the cmd_type or olinfo. By doing this we are able to reduce most of these functions to either just a simple shift followed by an or in the case of cmd_type, or an and followed by an or in the case of olinfo. To do this I also needed to change the logic and/or drop some flags. I dropped the IXGBE_TX_FLAGS_FSO and it was replaced by IXGBE_TX_FLAGS_TSO since the only place it was ever checked was in conjunction with IXGBE_TX_FLAGS_TSO. I replaced IXGBE_TX_FLAGS_TXSW with IXGBE_TX_FLAGS_CC, this way we have a clear point for what the flag is meant to do. Finally the IXGBE_TX_FLAGS_NO_IFCS was dropped since were are already carrying the data for that flag in the skb. Instead we can just check the bitflag in the skb. In order to avoid type conversion errors I also adjusted the locations where we were switching between CPU and little endian. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 8e78676..f94c085 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -96,16 +96,23 @@ /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define IXGBE_TX_FLAGS_CSUM (u32)(1) -#define IXGBE_TX_FLAGS_HW_VLAN (u32)(1 << 1) -#define IXGBE_TX_FLAGS_SW_VLAN (u32)(1 << 2) -#define IXGBE_TX_FLAGS_TSO (u32)(1 << 3) -#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 4) -#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5) -#define IXGBE_TX_FLAGS_FSO (u32)(1 << 6) -#define IXGBE_TX_FLAGS_TXSW (u32)(1 << 7) -#define IXGBE_TX_FLAGS_TSTAMP (u32)(1 << 8) -#define IXGBE_TX_FLAGS_NO_IFCS (u32)(1 << 9) +enum ixgbe_tx_flags { + /* cmd_type flags */ + IXGBE_TX_FLAGS_HW_VLAN = 0x01, + IXGBE_TX_FLAGS_TSO = 0x02, + IXGBE_TX_FLAGS_TSTAMP = 0x04, + + /* olinfo flags */ + IXGBE_TX_FLAGS_CC = 0x08, + IXGBE_TX_FLAGS_IPV4 = 0x10, + IXGBE_TX_FLAGS_CSUM = 0x20, + + /* software defined flags */ + IXGBE_TX_FLAGS_SW_VLAN = 0x40, + IXGBE_TX_FLAGS_FCOE = 0x80, +}; + +/* VLAN info */ #define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000 #define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index c88aa1c..4968367 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -544,11 +544,11 @@ int ixgbe_fso(struct ixgbe_ring *tx_ring, first->gso_segs = DIV_ROUND_UP(skb->len - *hdr_len, skb_shinfo(skb)->gso_size); first->bytecount += (first->gso_segs - 1) * *hdr_len; - first->tx_flags |= IXGBE_TX_FLAGS_FSO; + first->tx_flags |= IXGBE_TX_FLAGS_TSO; } /* set flag indicating FCOE to ixgbe_tx_map call */ - first->tx_flags |= IXGBE_TX_FLAGS_FCOE; + first->tx_flags |= IXGBE_TX_FLAGS_FCOE | IXGBE_TX_FLAGS_CC; /* mss_l4len_id: use 0 for FSO as TSO, no need for L4LEN */ mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 2e2bf33..f7a314f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5968,12 +5968,9 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, u32 type_tucmd = 0; if (skb->ip_summed != CHECKSUM_PARTIAL) { - if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN)) { - if (unlikely(skb->no_fcs)) - first->tx_flags |= IXGBE_TX_FLAGS_NO_IFCS; - if (!(first->tx_flags & IXGBE_TX_FLAGS_TXSW)) - return; - } + if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN) && + !(first->tx_flags & IXGBE_TX_FLAGS_CC)) + return; } else { u8 l4_hdr = 0; switch (first->protocol) { @@ -6031,30 +6028,32 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, type_tucmd, mss_l4len_idx); } -static __le32 ixgbe_tx_cmd_type(u32 tx_flags) +#define IXGBE_SET_FLAG(_input, _flag, _result) \ + ((_flag <= _result) ? \ + ((u32)(_input & _flag) * (_result / _flag)) : \ + ((u32)(_input & _flag) / (_flag / _result))) + +static u32 ixgbe_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) { /* set type for advanced descriptor with frame checksum insertion */ - __le32 cmd_type = cpu_to_le32(IXGBE_ADVTXD_DTYP_DATA | - IXGBE_ADVTXD_DCMD_DEXT); + u32 cmd_type = IXGBE_ADVTXD_DTYP_DATA | + IXGBE_ADVTXD_DCMD_DEXT | + IXGBE_ADVTXD_DCMD_IFCS; /* set HW vlan bit if vlan is present */ - if (tx_flags & IXGBE_TX_FLAGS_HW_VLAN) - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_VLE); - - if (tx_flags & IXGBE_TX_FLAGS_TSTAMP) - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_MAC_TSTAMP); + cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_HW_VLAN, + IXGBE_ADVTXD_DCMD_VLE); /* set segmentation enable bits for TSO/FSO */ -#ifdef IXGBE_FCOE - if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FSO)) -#else - if (tx_flags & IXGBE_TX_FLAGS_TSO) -#endif - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_TSE); + cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSO, + IXGBE_ADVTXD_DCMD_TSE); + + /* set timestamp bit if present */ + cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSTAMP, + IXGBE_ADVTXD_MAC_TSTAMP); /* insert frame checksum */ - if (!(tx_flags & IXGBE_TX_FLAGS_NO_IFCS)) - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_IFCS); + cmd_type ^= IXGBE_SET_FLAG(skb->no_fcs, 1, IXGBE_ADVTXD_DCMD_IFCS); return cmd_type; } @@ -6062,28 +6061,27 @@ static __le32 ixgbe_tx_cmd_type(u32 tx_flags) static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc, u32 tx_flags, unsigned int paylen) { - __le32 olinfo_status = cpu_to_le32(paylen << IXGBE_ADVTXD_PAYLEN_SHIFT); + u32 olinfo_status = paylen << IXGBE_ADVTXD_PAYLEN_SHIFT; /* enable L4 checksum for TSO and TX checksum offload */ - if (tx_flags & IXGBE_TX_FLAGS_CSUM) - olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM); + olinfo_status |= IXGBE_SET_FLAG(tx_flags, + IXGBE_TX_FLAGS_CSUM, + IXGBE_ADVTXD_POPTS_TXSM); /* enble IPv4 checksum for TSO */ - if (tx_flags & IXGBE_TX_FLAGS_IPV4) - olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM); + olinfo_status |= IXGBE_SET_FLAG(tx_flags, + IXGBE_TX_FLAGS_IPV4, + IXGBE_ADVTXD_POPTS_IXSM); /* * Check Context must be set if Tx switch is enabled, which it * always is for case where virtual functions are running */ -#ifdef IXGBE_FCOE - if (tx_flags & (IXGBE_TX_FLAGS_TXSW | IXGBE_TX_FLAGS_FCOE)) -#else - if (tx_flags & IXGBE_TX_FLAGS_TXSW) -#endif - olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC); + olinfo_status |= IXGBE_SET_FLAG(tx_flags, + IXGBE_TX_FLAGS_CC, + IXGBE_ADVTXD_CC); - tx_desc->read.olinfo_status = olinfo_status; + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); } #define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ @@ -6102,13 +6100,12 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, unsigned int size = skb_headlen(skb); unsigned int paylen = skb->len - hdr_len; u32 tx_flags = first->tx_flags; - __le32 cmd_type; + u32 cmd_type = ixgbe_tx_cmd_type(skb, tx_flags); u16 i = tx_ring->next_to_use; tx_desc = IXGBE_TX_DESC(tx_ring, i); ixgbe_tx_olinfo_status(tx_desc, tx_flags, paylen); - cmd_type = ixgbe_tx_cmd_type(tx_flags); #ifdef IXGBE_FCOE if (tx_flags & IXGBE_TX_FLAGS_FCOE) { @@ -6134,7 +6131,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, for (;;) { while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) { tx_desc->read.cmd_type_len = - cmd_type | cpu_to_le32(IXGBE_MAX_DATA_PER_TXD); + cpu_to_le32(cmd_type ^ IXGBE_MAX_DATA_PER_TXD); i++; tx_desc++; @@ -6153,7 +6150,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, if (likely(!data_len)) break; - tx_desc->read.cmd_type_len = cmd_type | cpu_to_le32(size); + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); i++; tx_desc++; @@ -6185,8 +6182,8 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, } /* write last descriptor with RS and EOP bits */ - cmd_type |= cpu_to_le32(size) | cpu_to_le32(IXGBE_TXD_CMD); - tx_desc->read.cmd_type_len = cmd_type; + cmd_type |= size | IXGBE_TXD_CMD; + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); @@ -6447,7 +6444,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, * Tx switch had been disabled. */ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) - tx_flags |= IXGBE_TX_FLAGS_TXSW; + tx_flags |= IXGBE_TX_FLAGS_CC; #endif /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ -- cgit v0.10.2 From ec718254cbfe2c311ee56a41af41877b7a51a556 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 30 Oct 2012 06:01:55 +0000 Subject: ixgbe: Improve performance and reduce size of ixgbe_tx_map This change is meant to both improve the performance and reduce the size of ixgbe_tx_map. To do this I have expanded the work done in the main loop by pushing first into tx_buffer. This allows us to pull in the dma_mapping_error check, the tx_buffer value assignment, and the initial DMA value assignment to the Tx descriptor. The net result is that the function reduces in size by a little over a 100 bytes and is about 1% or 2% faster. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index f7a314f..e7109de 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6091,21 +6091,22 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, struct ixgbe_tx_buffer *first, const u8 hdr_len) { - dma_addr_t dma; struct sk_buff *skb = first->skb; struct ixgbe_tx_buffer *tx_buffer; union ixgbe_adv_tx_desc *tx_desc; - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; - unsigned int data_len = skb->data_len; - unsigned int size = skb_headlen(skb); - unsigned int paylen = skb->len - hdr_len; + struct skb_frag_struct *frag; + dma_addr_t dma; + unsigned int data_len, size; u32 tx_flags = first->tx_flags; u32 cmd_type = ixgbe_tx_cmd_type(skb, tx_flags); u16 i = tx_ring->next_to_use; tx_desc = IXGBE_TX_DESC(tx_ring, i); - ixgbe_tx_olinfo_status(tx_desc, tx_flags, paylen); + ixgbe_tx_olinfo_status(tx_desc, tx_flags, skb->len - hdr_len); + + size = skb_headlen(skb); + data_len = skb->data_len; #ifdef IXGBE_FCOE if (tx_flags & IXGBE_TX_FLAGS_FCOE) { @@ -6119,16 +6120,19 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, #endif dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); - if (dma_mapping_error(tx_ring->dev, dma)) - goto dma_error; - /* record length, and DMA address */ - dma_unmap_len_set(first, len, size); - dma_unmap_addr_set(first, dma, dma); + tx_buffer = first; + + for (frag = &skb_shinfo(skb)->frags[0];; frag++) { + if (dma_mapping_error(tx_ring->dev, dma)) + goto dma_error; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_buffer, len, size); + dma_unmap_addr_set(tx_buffer, dma, dma); - tx_desc->read.buffer_addr = cpu_to_le64(dma); + tx_desc->read.buffer_addr = cpu_to_le64(dma); - for (;;) { while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) { tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ IXGBE_MAX_DATA_PER_TXD); @@ -6139,12 +6143,12 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, tx_desc = IXGBE_TX_DESC(tx_ring, 0); i = 0; } + tx_desc->read.olinfo_status = 0; dma += IXGBE_MAX_DATA_PER_TXD; size -= IXGBE_MAX_DATA_PER_TXD; tx_desc->read.buffer_addr = cpu_to_le64(dma); - tx_desc->read.olinfo_status = 0; } if (likely(!data_len)) @@ -6158,6 +6162,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, tx_desc = IXGBE_TX_DESC(tx_ring, 0); i = 0; } + tx_desc->read.olinfo_status = 0; #ifdef IXGBE_FCOE size = min_t(unsigned int, data_len, skb_frag_size(frag)); @@ -6168,17 +6173,8 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, DMA_TO_DEVICE); - if (dma_mapping_error(tx_ring->dev, dma)) - goto dma_error; tx_buffer = &tx_ring->tx_buffer_info[i]; - dma_unmap_len_set(tx_buffer, len, size); - dma_unmap_addr_set(tx_buffer, dma, dma); - - tx_desc->read.buffer_addr = cpu_to_le64(dma); - tx_desc->read.olinfo_status = 0; - - frag++; } /* write last descriptor with RS and EOP bits */ -- cgit v0.10.2 From 1e72bfc39d772ccb49f95d5b296a35c348796022 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Fri, 4 Jan 2013 07:37:20 +0000 Subject: ixgbevf: Synch out of tree and in tree mailbox interrupt handlers The out of tree driver and the in kernel driver should use the same interrupt handling logic for mailbox interrupts. The difference in the handlers was causing dissimilar behavior between the two drivers complicating debug and trouble shooting. Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index c27d986..580dfd8 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -750,12 +750,35 @@ static void ixgbevf_set_itr(struct ixgbevf_q_vector *q_vector) static irqreturn_t ixgbevf_msix_other(int irq, void *data) { struct ixgbevf_adapter *adapter = data; + struct pci_dev *pdev = adapter->pdev; struct ixgbe_hw *hw = &adapter->hw; + u32 msg; + bool got_ack = false; hw->mac.get_link_status = 1; + if (!hw->mbx.ops.check_for_ack(hw)) + got_ack = true; - if (!test_bit(__IXGBEVF_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies); + if (!hw->mbx.ops.check_for_msg(hw)) { + hw->mbx.ops.read(hw, &msg, 1); + + if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 1)); + + if (msg & IXGBE_VT_MSGTYPE_NACK) + dev_info(&pdev->dev, + "Last Request of type %2.2x to PF Nacked\n", + msg & 0xFF); + hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFSTS; + } + + /* checking for the ack clears the PFACK bit. Place + * it back in the v2p_mailbox cache so that anyone + * polling for an ack will not miss it + */ + if (got_ack) + hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFACK; IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, adapter->eims_other); -- cgit v0.10.2 From 6fe59675500760dd21ef8a339fa129f7adb596c8 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Fri, 4 Jan 2013 07:37:26 +0000 Subject: ixgbevf: Fix link up messages Use dev_info to log link up/down messages. Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 580dfd8..3fbf0d2 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -2240,9 +2240,10 @@ static void ixgbevf_watchdog_task(struct work_struct *work) if (link_up) { if (!netif_carrier_ok(netdev)) { - hw_dbg(&adapter->hw, "NIC Link is Up, %u Gbps\n", - (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ? - 10 : 1); + dev_info(&adapter->pdev->dev, + "NIC Link is Up, %u Gbps\n", + (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ? + 10 : 1); netif_carrier_on(netdev); netif_tx_wake_all_queues(netdev); } @@ -2250,7 +2251,7 @@ static void ixgbevf_watchdog_task(struct work_struct *work) adapter->link_up = false; adapter->link_speed = 0; if (netif_carrier_ok(netdev)) { - hw_dbg(&adapter->hw, "NIC Link is Down\n"); + dev_info(&adapter->pdev->dev, "NIC Link is Down\n"); netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); } -- cgit v0.10.2 From 088245a3584d13f94ff0b4c1610dae7d897b28f9 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Fri, 4 Jan 2013 07:37:31 +0000 Subject: ixgbevf: Fix statistics corruption When the physical function (PF) is reset for any reason the statistics collection in ixgbevf_update_stats needs to wait to update until after the reset synchronization ensures that the PF driver is up and running and is finished with its own reset. Go ahead and clear the link flag to indicate this when the control message from the PF is received. The reset synchronization and recovery in the watchdog task will eventually set the link flag up when the PF has resumed. Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 3fbf0d2..551e31d 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -762,9 +762,11 @@ static irqreturn_t ixgbevf_msix_other(int irq, void *data) if (!hw->mbx.ops.check_for_msg(hw)) { hw->mbx.ops.read(hw, &msg, 1); - if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG) + if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG) { mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 1)); + adapter->link_up = false; + } if (msg & IXGBE_VT_MSGTYPE_NACK) dev_info(&pdev->dev, @@ -2118,6 +2120,9 @@ void ixgbevf_update_stats(struct ixgbevf_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; int i; + if (!adapter->link_up) + return; + UPDATE_VF_COUNTER_32bit(IXGBE_VFGPRC, adapter->stats.last_vfgprc, adapter->stats.vfgprc); UPDATE_VF_COUNTER_32bit(IXGBE_VFGPTC, adapter->stats.last_vfgptc, -- cgit v0.10.2 From 70d289bcef24eca45dadf2f10fe79a936589216e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 8 Jan 2013 07:01:03 +0000 Subject: igb: Replace rmb in Tx cleanup with read_barrier_depends The rmb in the Tx cleanup path is a much stronger barrier than we really need. All that is really needed is a read_barrier_depends since the location of the EOP descriptor is dependent on the eop_desc value. Signed-off-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index c9e438b..7835404 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -5930,7 +5930,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) break; /* prevent any other reads prior to eop_desc */ - rmb(); + read_barrier_depends(); /* if DD is not set pending work has not been completed */ if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) -- cgit v0.10.2 From 4b9ea4626b52c113c367c4776c9bb11b7231393d Mon Sep 17 00:00:00 2001 From: "Akeem G. Abodunrin" Date: Tue, 8 Jan 2013 18:31:12 +0000 Subject: igb: Copyright string update to year 2013 This patch updates Copyright year to 2013 v2: Changed Copyright year on Makefile Signed-off-by: Akeem G. Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile index f9d37c8..f19700e 100644 --- a/drivers/net/ethernet/intel/igb/Makefile +++ b/drivers/net/ethernet/intel/igb/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 82575 PCI-Express Ethernet Linux driver -# Copyright(c) 1999 - 2012 Intel Corporation. +# Copyright(c) 1999 - 2013 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index b6ec782..54a7c20 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 444f6f521..73ab41f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 9b7ef93..7e13337 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 2c9b6f4..0d5cf9c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index fbcdbeb..6a42344 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index 1c89358..e4e1a73 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 101e6e4..a5c7200 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h index e2b2c4b..e6d6ce4 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.h +++ b/drivers/net/ethernet/intel/igb/e1000_mac.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c index 5988b89..38e0df3 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mbx.c +++ b/drivers/net/ethernet/intel/igb/e1000_mbx.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h index dbcfa3d..c13b56d 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mbx.h +++ b/drivers/net/ethernet/intel/igb/e1000_mbx.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c index fbb7604..5b62adb 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.c +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h index 7012d45..6bfc0c4 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.h +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2012 Intel Corporation. + Copyright(c) 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index fe76004..2918c97 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index ed282f8..784fd1c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 889de26..1534328 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index ad317ab..4b78053 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 3ff3794..40b5d56 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 106bd7c..0a9b073 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 7835404..b81a953 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -69,7 +69,8 @@ char igb_driver_name[] = "igb"; char igb_driver_version[] = DRV_VERSION; static const char igb_driver_string[] = "Intel(R) Gigabit Ethernet Network Driver"; -static const char igb_copyright[] = "Copyright (c) 2007-2012 Intel Corporation."; +static const char igb_copyright[] = + "Copyright (c) 2007-2013 Intel Corporation."; static const struct e1000_info *igb_info_tbl[] = { [board_82575] = &e1000_82575_info, -- cgit v0.10.2 From 7241444209f88f804ea33483394a601c1afb1d64 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 25 Dec 2012 13:14:37 +0100 Subject: batman-adv: a delayed_work has to be initialised once A delayed_work struct does not need to be initialized each every time before being enqueued. Therefore the INIT_DELAYED_WORK() macro should be used during the initialization process only. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 5e834c1..bb5fbd6 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1100,16 +1100,6 @@ void batadv_bla_update_orig_address(struct batadv_priv *bat_priv, } } - - -/* (re)start the timer */ -static void batadv_bla_start_timer(struct batadv_priv *bat_priv) -{ - INIT_DELAYED_WORK(&bat_priv->bla.work, batadv_bla_periodic_work); - queue_delayed_work(batadv_event_workqueue, &bat_priv->bla.work, - msecs_to_jiffies(BATADV_BLA_PERIOD_LENGTH)); -} - /* periodic work to do: * * purge structures when they are too old * * send announcements @@ -1180,7 +1170,8 @@ out: if (primary_if) batadv_hardif_free_ref(primary_if); - batadv_bla_start_timer(bat_priv); + queue_delayed_work(batadv_event_workqueue, &bat_priv->bla.work, + msecs_to_jiffies(BATADV_BLA_PERIOD_LENGTH)); } /* The hash for claim and backbone hash receive the same key because they @@ -1238,7 +1229,10 @@ int batadv_bla_init(struct batadv_priv *bat_priv) batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla hashes initialized\n"); - batadv_bla_start_timer(bat_priv); + INIT_DELAYED_WORK(&bat_priv->bla.work, batadv_bla_periodic_work); + + queue_delayed_work(batadv_event_workqueue, &bat_priv->bla.work, + msecs_to_jiffies(BATADV_BLA_PERIOD_LENGTH)); return 0; } diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index d04b209..af73d60 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -44,6 +44,8 @@ #define BATADV_TT_LOCAL_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_CLIENT_ROAM_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_CLIENT_TEMP_TIMEOUT 600000 /* in milliseconds */ +#define BATADV_TT_WORK_PERIOD 5000 /* 5 seconds */ +#define BATADV_ORIG_WORK_PERIOD 1000 /* 1 second */ #define BATADV_DAT_ENTRY_TIMEOUT (5*60000) /* 5 mins in milliseconds */ /* sliding packet range of received originator messages in sequence numbers * (should be a multiple of our word size) diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index fa88b2b..92a55fd 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -34,13 +34,6 @@ static struct lock_class_key batadv_orig_hash_lock_class_key; static void batadv_purge_orig(struct work_struct *work); -static void batadv_start_purge_timer(struct batadv_priv *bat_priv) -{ - INIT_DELAYED_WORK(&bat_priv->orig_work, batadv_purge_orig); - queue_delayed_work(batadv_event_workqueue, - &bat_priv->orig_work, msecs_to_jiffies(1000)); -} - /* returns 1 if they are the same originator */ static int batadv_compare_orig(const struct hlist_node *node, const void *data2) { @@ -63,7 +56,11 @@ int batadv_originator_init(struct batadv_priv *bat_priv) batadv_hash_set_lock_class(bat_priv->orig_hash, &batadv_orig_hash_lock_class_key); - batadv_start_purge_timer(bat_priv); + INIT_DELAYED_WORK(&bat_priv->orig_work, batadv_purge_orig); + queue_delayed_work(batadv_event_workqueue, + &bat_priv->orig_work, + msecs_to_jiffies(BATADV_ORIG_WORK_PERIOD)); + return 0; err: @@ -396,7 +393,9 @@ static void batadv_purge_orig(struct work_struct *work) delayed_work = container_of(work, struct delayed_work, work); bat_priv = container_of(delayed_work, struct batadv_priv, orig_work); _batadv_purge_orig(bat_priv); - batadv_start_purge_timer(bat_priv); + queue_delayed_work(batadv_event_workqueue, + &bat_priv->orig_work, + msecs_to_jiffies(BATADV_ORIG_WORK_PERIOD)); } void batadv_purge_orig_ref(struct batadv_priv *bat_priv) diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c index 89810ce..0b6f65b 100644 --- a/net/batman-adv/send.c +++ b/net/batman-adv/send.c @@ -155,8 +155,6 @@ _batadv_add_bcast_packet_to_list(struct batadv_priv *bat_priv, spin_unlock_bh(&bat_priv->forw_bcast_list_lock); /* start timer for this packet */ - INIT_DELAYED_WORK(&forw_packet->delayed_work, - batadv_send_outstanding_bcast_packet); queue_delayed_work(batadv_event_workqueue, &forw_packet->delayed_work, send_time); } @@ -210,6 +208,9 @@ int batadv_add_bcast_packet_to_list(struct batadv_priv *bat_priv, /* how often did we send the bcast packet ? */ forw_packet->num_packets = 0; + INIT_DELAYED_WORK(&forw_packet->delayed_work, + batadv_send_outstanding_bcast_packet); + _batadv_add_bcast_packet_to_list(bat_priv, forw_packet, delay); return NETDEV_TX_OK; diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index d4b27b6..877acd1 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -52,13 +52,6 @@ static int batadv_compare_tt(const struct hlist_node *node, const void *data2) return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0); } -static void batadv_tt_start_timer(struct batadv_priv *bat_priv) -{ - INIT_DELAYED_WORK(&bat_priv->tt.work, batadv_tt_purge); - queue_delayed_work(batadv_event_workqueue, &bat_priv->tt.work, - msecs_to_jiffies(5000)); -} - static struct batadv_tt_common_entry * batadv_tt_hash_find(struct batadv_hashtable *hash, const void *data) { @@ -2136,7 +2129,9 @@ int batadv_tt_init(struct batadv_priv *bat_priv) if (ret < 0) return ret; - batadv_tt_start_timer(bat_priv); + INIT_DELAYED_WORK(&bat_priv->tt.work, batadv_tt_purge); + queue_delayed_work(batadv_event_workqueue, &bat_priv->tt.work, + msecs_to_jiffies(BATADV_TT_WORK_PERIOD)); return 1; } @@ -2286,7 +2281,8 @@ static void batadv_tt_purge(struct work_struct *work) batadv_tt_req_purge(bat_priv); batadv_tt_roam_purge(bat_priv); - batadv_tt_start_timer(bat_priv); + queue_delayed_work(batadv_event_workqueue, &bat_priv->tt.work, + msecs_to_jiffies(BATADV_TT_WORK_PERIOD)); } void batadv_tt_free(struct batadv_priv *bat_priv) diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 60eb9b7..51e2bf0 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -31,8 +31,6 @@ /* hash class keys */ static struct lock_class_key batadv_vis_hash_lock_class_key; -static void batadv_start_vis_timer(struct batadv_priv *bat_priv); - /* free the info */ static void batadv_free_info(struct kref *ref) { @@ -830,7 +828,9 @@ static void batadv_send_vis_packets(struct work_struct *work) kref_put(&info->refcount, batadv_free_info); } spin_unlock_bh(&bat_priv->vis.hash_lock); - batadv_start_vis_timer(bat_priv); + + queue_delayed_work(batadv_event_workqueue, &bat_priv->vis.work, + msecs_to_jiffies(BATADV_VIS_INTERVAL)); } /* init the vis server. this may only be called when if_list is already @@ -900,7 +900,11 @@ int batadv_vis_init(struct batadv_priv *bat_priv) } spin_unlock_bh(&bat_priv->vis.hash_lock); - batadv_start_vis_timer(bat_priv); + + INIT_DELAYED_WORK(&bat_priv->vis.work, batadv_send_vis_packets); + queue_delayed_work(batadv_event_workqueue, &bat_priv->vis.work, + msecs_to_jiffies(BATADV_VIS_INTERVAL)); + return 0; free_info: @@ -937,11 +941,3 @@ void batadv_vis_quit(struct batadv_priv *bat_priv) bat_priv->vis.my_info = NULL; spin_unlock_bh(&bat_priv->vis.hash_lock); } - -/* schedule packets for (re)transmission */ -static void batadv_start_vis_timer(struct batadv_priv *bat_priv) -{ - INIT_DELAYED_WORK(&bat_priv->vis.work, batadv_send_vis_packets); - queue_delayed_work(batadv_event_workqueue, &bat_priv->vis.work, - msecs_to_jiffies(BATADV_VIS_INTERVAL)); -} -- cgit v0.10.2 From b6d0ab7ca306f3363a5996570ae8772d57d61846 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:19 +0800 Subject: batman-adv: align kernel doc properly Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index d8061ac..dffbdff 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -66,19 +66,18 @@ struct batadv_hard_iface { }; /** - * struct batadv_orig_node - structure for orig_list maintaining nodes of mesh - * @primary_addr: hosts primary interface address - * @last_seen: when last packet from this node was received - * @bcast_seqno_reset: time when the broadcast seqno window was reset - * @batman_seqno_reset: time when the batman seqno window was reset - * @gw_flags: flags related to gateway class - * @flags: for now only VIS_SERVER flag - * @last_real_seqno: last and best known sequence number - * @last_ttl: ttl of last received packet - * @last_bcast_seqno: last broadcast sequence number received by this host - * - * @candidates: how many candidates are available - * @selected: next bonding candidate + * struct batadv_orig_node - structure for orig_list maintaining nodes of mesh + * @primary_addr: hosts primary interface address + * @last_seen: when last packet from this node was received + * @bcast_seqno_reset: time when the broadcast seqno window was reset + * @batman_seqno_reset: time when the batman seqno window was reset + * @gw_flags: flags related to gateway class + * @flags: for now only VIS_SERVER flag + * @last_real_seqno: last and best known sequence number + * @last_ttl: ttl of last received packet + * @last_bcast_seqno: last broadcast sequence number received by this host + * @candidates: how many candidates are available + * @selected: next bonding candidate */ struct batadv_orig_node { uint8_t orig[ETH_ALEN]; -- cgit v0.10.2 From 0abf5d8117dc864135eda5adda12640e16ed0cb8 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:20 +0800 Subject: batman-adv: mark debug_log struct as bat_priv only struct Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 55a9007..e47555b 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -40,13 +40,14 @@ static struct dentry *batadv_debugfs; static const int batadv_log_buff_len = BATADV_LOG_BUF_LEN; -static char *batadv_log_char_addr(struct batadv_debug_log *debug_log, +static char *batadv_log_char_addr(struct batadv_priv_debug_log *debug_log, size_t idx) { return &debug_log->log_buff[idx & BATADV_LOG_BUFF_MASK]; } -static void batadv_emit_log_char(struct batadv_debug_log *debug_log, char c) +static void batadv_emit_log_char(struct batadv_priv_debug_log *debug_log, + char c) { char *char_addr; @@ -59,7 +60,7 @@ static void batadv_emit_log_char(struct batadv_debug_log *debug_log, char c) } __printf(2, 3) -static int batadv_fdebug_log(struct batadv_debug_log *debug_log, +static int batadv_fdebug_log(struct batadv_priv_debug_log *debug_log, const char *fmt, ...) { va_list args; @@ -114,7 +115,7 @@ static int batadv_log_release(struct inode *inode, struct file *file) return 0; } -static int batadv_log_empty(struct batadv_debug_log *debug_log) +static int batadv_log_empty(struct batadv_priv_debug_log *debug_log) { return !(debug_log->log_start - debug_log->log_end); } @@ -123,7 +124,7 @@ static ssize_t batadv_log_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct batadv_priv *bat_priv = file->private_data; - struct batadv_debug_log *debug_log = bat_priv->debug_log; + struct batadv_priv_debug_log *debug_log = bat_priv->debug_log; int error, i = 0; char *char_addr; char c; @@ -177,7 +178,7 @@ static ssize_t batadv_log_read(struct file *file, char __user *buf, static unsigned int batadv_log_poll(struct file *file, poll_table *wait) { struct batadv_priv *bat_priv = file->private_data; - struct batadv_debug_log *debug_log = bat_priv->debug_log; + struct batadv_priv_debug_log *debug_log = bat_priv->debug_log; poll_wait(file, &debug_log->queue_wait, wait); diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index dffbdff..db3fb25 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -233,6 +233,16 @@ struct batadv_priv_bla { }; #endif +#ifdef CONFIG_BATMAN_ADV_DEBUG +struct batadv_priv_debug_log { + char log_buff[BATADV_LOG_BUF_LEN]; + unsigned long log_start; + unsigned long log_end; + spinlock_t lock; /* protects log_buff, log_start and log_end */ + wait_queue_head_t queue_wait; +}; +#endif + struct batadv_priv_gw { struct hlist_head list; spinlock_t list_lock; /* protects gw_list and curr_gw */ @@ -290,9 +300,6 @@ struct batadv_priv { atomic_t bcast_queue_left; atomic_t batman_queue_left; char num_ifaces; -#ifdef CONFIG_BATMAN_ADV_DEBUG - struct batadv_debug_log *debug_log; -#endif struct kobject *mesh_obj; struct dentry *debug_dir; struct hlist_head forw_bat_list; @@ -306,6 +313,9 @@ struct batadv_priv { #ifdef CONFIG_BATMAN_ADV_BLA struct batadv_priv_bla bla; #endif +#ifdef CONFIG_BATMAN_ADV_DEBUG + struct batadv_priv_debug_log *debug_log; +#endif struct batadv_priv_gw gw; struct batadv_priv_tt tt; struct batadv_priv_vis vis; @@ -425,15 +435,6 @@ struct batadv_if_list_entry { bool primary; struct hlist_node list; }; - -struct batadv_debug_log { - char log_buff[BATADV_LOG_BUF_LEN]; - unsigned long log_start; - unsigned long log_end; - spinlock_t lock; /* protects log_buff, log_start and log_end */ - wait_queue_head_t queue_wait; -}; - struct batadv_frag_packet_list_entry { struct list_head list; uint16_t seqno; -- cgit v0.10.2 From 2006fea82085cfd9ddc92b23ef1ea8d57e065c61 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:21 +0800 Subject: batman-adv: group tt type definitions together Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index db3fb25..9a66115 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -339,6 +339,31 @@ struct batadv_socket_packet { struct batadv_icmp_packet_rr icmp_packet; }; +#ifdef CONFIG_BATMAN_ADV_BLA +struct batadv_backbone_gw { + uint8_t orig[ETH_ALEN]; + short vid; /* used VLAN ID */ + struct hlist_node hash_entry; + struct batadv_priv *bat_priv; + unsigned long lasttime; /* last time we heard of this backbone gw */ + atomic_t wait_periods; + atomic_t request_sent; + atomic_t refcount; + struct rcu_head rcu; + uint16_t crc; /* crc checksum over all claims */ +}; + +struct batadv_claim { + uint8_t addr[ETH_ALEN]; + short vid; + struct batadv_backbone_gw *backbone_gw; + unsigned long lasttime; /* last time we heard of claim (locals only) */ + struct rcu_head rcu; + atomic_t refcount; + struct hlist_node hash_entry; +}; +#endif + struct batadv_tt_common_entry { uint8_t addr[ETH_ALEN]; struct hlist_node hash_entry; @@ -368,31 +393,6 @@ struct batadv_tt_orig_list_entry { struct hlist_node list; }; -#ifdef CONFIG_BATMAN_ADV_BLA -struct batadv_backbone_gw { - uint8_t orig[ETH_ALEN]; - short vid; /* used VLAN ID */ - struct hlist_node hash_entry; - struct batadv_priv *bat_priv; - unsigned long lasttime; /* last time we heard of this backbone gw */ - atomic_t wait_periods; - atomic_t request_sent; - atomic_t refcount; - struct rcu_head rcu; - uint16_t crc; /* crc checksum over all claims */ -}; - -struct batadv_claim { - uint8_t addr[ETH_ALEN]; - short vid; - struct batadv_backbone_gw *backbone_gw; - unsigned long lasttime; /* last time we heard of claim (locals only) */ - struct rcu_head rcu; - atomic_t refcount; - struct hlist_node hash_entry; -}; -#endif - struct batadv_tt_change_node { struct list_head list; struct batadv_tt_change change; -- cgit v0.10.2 From 015b4ae4a36bb5ee62187ac6e2f193e87d225516 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:22 +0800 Subject: batman-adv: rename batadv_if_list_entry struct to make clear it is used by vis Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 9a66115..d17517c 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -426,15 +426,6 @@ struct batadv_forw_packet { struct batadv_hard_iface *if_incoming; }; -/* While scanning for vis-entries of a particular vis-originator - * this list collects its interfaces to create a subgraph/cluster - * out of them later - */ -struct batadv_if_list_entry { - uint8_t addr[ETH_ALEN]; - bool primary; - struct hlist_node list; -}; struct batadv_frag_packet_list_entry { struct list_head list; uint16_t seqno; @@ -467,6 +458,16 @@ struct batadv_recvlist_node { uint8_t mac[ETH_ALEN]; }; +/* While scanning for vis-entries of a particular vis-originator + * this list collects its interfaces to create a subgraph/cluster + * out of them later + */ +struct batadv_vis_if_list_entry { + uint8_t addr[ETH_ALEN]; + bool primary; + struct hlist_node list; +}; + struct batadv_algo_ops { struct hlist_node list; char *name; diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 51e2bf0..3d42b17 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -127,7 +127,7 @@ static void batadv_vis_data_insert_interface(const uint8_t *interface, struct hlist_head *if_list, bool primary) { - struct batadv_if_list_entry *entry; + struct batadv_vis_if_list_entry *entry; struct hlist_node *pos; hlist_for_each_entry(entry, pos, if_list, list) { @@ -147,7 +147,7 @@ static void batadv_vis_data_insert_interface(const uint8_t *interface, static void batadv_vis_data_read_prim_sec(struct seq_file *seq, const struct hlist_head *if_list) { - struct batadv_if_list_entry *entry; + struct batadv_vis_if_list_entry *entry; struct hlist_node *pos; hlist_for_each_entry(entry, pos, if_list, list) { @@ -197,7 +197,7 @@ static void batadv_vis_data_read_entries(struct seq_file *seq, struct batadv_vis_info_entry *entries) { int i; - struct batadv_if_list_entry *entry; + struct batadv_vis_if_list_entry *entry; struct hlist_node *pos; hlist_for_each_entry(entry, pos, list, list) { @@ -223,7 +223,7 @@ static void batadv_vis_seq_print_text_bucket(struct seq_file *seq, struct batadv_vis_packet *packet; uint8_t *entries_pos; struct batadv_vis_info_entry *entries; - struct batadv_if_list_entry *entry; + struct batadv_vis_if_list_entry *entry; struct hlist_node *pos, *n; HLIST_HEAD(vis_if_list); -- cgit v0.10.2 From 28500f07abf120e5609a68d6eb2f78350562381d Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:23 +0800 Subject: batman-adv: rename batadv_recvlist_node struct to make clear it is used by vis Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index d17517c..c56e0d9 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -453,7 +453,7 @@ struct batadv_vis_info_entry { uint8_t quality; /* quality = 0 client */ } __packed; -struct batadv_recvlist_node { +struct batadv_vis_recvlist_node { struct list_head list; uint8_t mac[ETH_ALEN]; }; diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 3d42b17..2e70ec1 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -36,7 +36,7 @@ static void batadv_free_info(struct kref *ref) { struct batadv_vis_info *info; struct batadv_priv *bat_priv; - struct batadv_recvlist_node *entry, *tmp; + struct batadv_vis_recvlist_node *entry, *tmp; info = container_of(ref, struct batadv_vis_info, refcount); bat_priv = info->bat_priv; @@ -305,7 +305,7 @@ static void batadv_send_list_del(struct batadv_vis_info *info) static void batadv_recv_list_add(struct batadv_priv *bat_priv, struct list_head *recv_list, const char *mac) { - struct batadv_recvlist_node *entry; + struct batadv_vis_recvlist_node *entry; entry = kmalloc(sizeof(*entry), GFP_ATOMIC); if (!entry) @@ -322,7 +322,7 @@ static int batadv_recv_list_is_in(struct batadv_priv *bat_priv, const struct list_head *recv_list, const char *mac) { - const struct batadv_recvlist_node *entry; + const struct batadv_vis_recvlist_node *entry; spin_lock_bh(&bat_priv->vis.list_lock); list_for_each_entry(entry, recv_list, list) { -- cgit v0.10.2 From bae987747150d8939bf385863f49e2647db15e2a Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:24 +0800 Subject: batman-adv: rename batadv_backbone_gw struct to make clear it is used by bla Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index bb5fbd6..5f9a206 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -34,8 +34,9 @@ static const uint8_t batadv_announce_mac[4] = {0x43, 0x05, 0x43, 0x05}; static void batadv_bla_periodic_work(struct work_struct *work); -static void batadv_bla_send_announce(struct batadv_priv *bat_priv, - struct batadv_backbone_gw *backbone_gw); +static void +batadv_bla_send_announce(struct batadv_priv *bat_priv, + struct batadv_bla_backbone_gw *backbone_gw); /* return the index of the claim */ static inline uint32_t batadv_choose_claim(const void *data, uint32_t size) @@ -75,9 +76,9 @@ static inline uint32_t batadv_choose_backbone_gw(const void *data, static int batadv_compare_backbone_gw(const struct hlist_node *node, const void *data2) { - const void *data1 = container_of(node, struct batadv_backbone_gw, + const void *data1 = container_of(node, struct batadv_bla_backbone_gw, hash_entry); - const struct batadv_backbone_gw *gw1 = data1, *gw2 = data2; + const struct batadv_bla_backbone_gw *gw1 = data1, *gw2 = data2; if (!batadv_compare_eth(gw1->orig, gw2->orig)) return 0; @@ -106,7 +107,8 @@ static int batadv_compare_claim(const struct hlist_node *node, } /* free a backbone gw */ -static void batadv_backbone_gw_free_ref(struct batadv_backbone_gw *backbone_gw) +static void +batadv_backbone_gw_free_ref(struct batadv_bla_backbone_gw *backbone_gw) { if (atomic_dec_and_test(&backbone_gw->refcount)) kfree_rcu(backbone_gw, rcu); @@ -176,15 +178,15 @@ static struct batadv_claim *batadv_claim_hash_find(struct batadv_priv *bat_priv, * * Returns claim if found or NULL otherwise. */ -static struct batadv_backbone_gw * +static struct batadv_bla_backbone_gw * batadv_backbone_hash_find(struct batadv_priv *bat_priv, uint8_t *addr, short vid) { struct batadv_hashtable *hash = bat_priv->bla.backbone_hash; struct hlist_head *head; struct hlist_node *node; - struct batadv_backbone_gw search_entry, *backbone_gw; - struct batadv_backbone_gw *backbone_gw_tmp = NULL; + struct batadv_bla_backbone_gw search_entry, *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw_tmp = NULL; int index; if (!hash) @@ -215,7 +217,7 @@ batadv_backbone_hash_find(struct batadv_priv *bat_priv, /* delete all claims for a backbone */ static void -batadv_bla_del_backbone_claims(struct batadv_backbone_gw *backbone_gw) +batadv_bla_del_backbone_claims(struct batadv_bla_backbone_gw *backbone_gw) { struct batadv_hashtable *hash; struct hlist_node *node, *node_tmp; @@ -364,11 +366,11 @@ out: * searches for the backbone gw or creates a new one if it could not * be found. */ -static struct batadv_backbone_gw * +static struct batadv_bla_backbone_gw * batadv_bla_get_backbone_gw(struct batadv_priv *bat_priv, uint8_t *orig, short vid, bool own_backbone) { - struct batadv_backbone_gw *entry; + struct batadv_bla_backbone_gw *entry; struct batadv_orig_node *orig_node; int hash_added; @@ -435,7 +437,7 @@ batadv_bla_update_own_backbone_gw(struct batadv_priv *bat_priv, struct batadv_hard_iface *primary_if, short vid) { - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; backbone_gw = batadv_bla_get_backbone_gw(bat_priv, primary_if->net_dev->dev_addr, @@ -461,7 +463,7 @@ static void batadv_bla_answer_request(struct batadv_priv *bat_priv, struct hlist_head *head; struct batadv_hashtable *hash; struct batadv_claim *claim; - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; int i; batadv_dbg(BATADV_DBG_BLA, bat_priv, @@ -500,7 +502,7 @@ static void batadv_bla_answer_request(struct batadv_priv *bat_priv, * After the request, it will repeat all of his own claims and finally * send an announcement claim with which we can check again. */ -static void batadv_bla_send_request(struct batadv_backbone_gw *backbone_gw) +static void batadv_bla_send_request(struct batadv_bla_backbone_gw *backbone_gw) { /* first, remove all old entries */ batadv_bla_del_backbone_claims(backbone_gw); @@ -526,7 +528,7 @@ static void batadv_bla_send_request(struct batadv_backbone_gw *backbone_gw) * places. */ static void batadv_bla_send_announce(struct batadv_priv *bat_priv, - struct batadv_backbone_gw *backbone_gw) + struct batadv_bla_backbone_gw *backbone_gw) { uint8_t mac[ETH_ALEN]; __be16 crc; @@ -548,7 +550,7 @@ static void batadv_bla_send_announce(struct batadv_priv *bat_priv, */ static void batadv_bla_add_claim(struct batadv_priv *bat_priv, const uint8_t *mac, const short vid, - struct batadv_backbone_gw *backbone_gw) + struct batadv_bla_backbone_gw *backbone_gw) { struct batadv_claim *claim; struct batadv_claim search_claim; @@ -639,7 +641,7 @@ static int batadv_handle_announce(struct batadv_priv *bat_priv, uint8_t *an_addr, uint8_t *backbone_addr, short vid) { - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; uint16_t crc; if (memcmp(an_addr, batadv_announce_mac, 4) != 0) @@ -711,7 +713,7 @@ static int batadv_handle_unclaim(struct batadv_priv *bat_priv, uint8_t *backbone_addr, uint8_t *claim_addr, short vid) { - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; /* unclaim in any case if it is our own */ if (primary_if && batadv_compare_eth(backbone_addr, @@ -740,7 +742,7 @@ static int batadv_handle_claim(struct batadv_priv *bat_priv, uint8_t *backbone_addr, uint8_t *claim_addr, short vid) { - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; /* register the gateway if not yet available, and add the claim. */ @@ -954,7 +956,7 @@ static int batadv_bla_process_claim(struct batadv_priv *bat_priv, */ static void batadv_bla_purge_backbone_gw(struct batadv_priv *bat_priv, int now) { - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; struct hlist_node *node, *node_tmp; struct hlist_head *head; struct batadv_hashtable *hash; @@ -1058,7 +1060,7 @@ void batadv_bla_update_orig_address(struct batadv_priv *bat_priv, struct batadv_hard_iface *primary_if, struct batadv_hard_iface *oldif) { - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; struct hlist_node *node; struct hlist_head *head; struct batadv_hashtable *hash; @@ -1111,7 +1113,7 @@ static void batadv_bla_periodic_work(struct work_struct *work) struct batadv_priv_bla *priv_bla; struct hlist_node *node; struct hlist_head *head; - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; struct batadv_hashtable *hash; struct batadv_hard_iface *primary_if; int i; @@ -1320,7 +1322,7 @@ int batadv_bla_is_backbone_gw_orig(struct batadv_priv *bat_priv, uint8_t *orig) struct batadv_hashtable *hash = bat_priv->bla.backbone_hash; struct hlist_head *head; struct hlist_node *node; - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; int i; if (!atomic_read(&bat_priv->bridge_loop_avoidance)) @@ -1361,7 +1363,7 @@ int batadv_bla_is_backbone_gw(struct sk_buff *skb, { struct ethhdr *ethhdr; struct vlan_ethhdr *vhdr; - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; short vid = -1; if (!atomic_read(&orig_node->bat_priv->bridge_loop_avoidance)) @@ -1647,7 +1649,7 @@ int batadv_bla_backbone_table_seq_print_text(struct seq_file *seq, void *offset) struct net_device *net_dev = (struct net_device *)seq->private; struct batadv_priv *bat_priv = netdev_priv(net_dev); struct batadv_hashtable *hash = bat_priv->bla.backbone_hash; - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; struct batadv_hard_iface *primary_if; struct hlist_node *node; struct hlist_head *head; diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index c56e0d9..eb3d129 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -340,7 +340,7 @@ struct batadv_socket_packet { }; #ifdef CONFIG_BATMAN_ADV_BLA -struct batadv_backbone_gw { +struct batadv_bla_backbone_gw { uint8_t orig[ETH_ALEN]; short vid; /* used VLAN ID */ struct hlist_node hash_entry; @@ -356,7 +356,7 @@ struct batadv_backbone_gw { struct batadv_claim { uint8_t addr[ETH_ALEN]; short vid; - struct batadv_backbone_gw *backbone_gw; + struct batadv_bla_backbone_gw *backbone_gw; unsigned long lasttime; /* last time we heard of claim (locals only) */ struct rcu_head rcu; atomic_t refcount; -- cgit v0.10.2 From 712bbfe46b3004603762adb506baff99be0f8d8c Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 17:03:25 +0800 Subject: batman-adv: rename batadv_claim struct to make clear it is used by bla Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 5f9a206..9971892 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -41,7 +41,7 @@ batadv_bla_send_announce(struct batadv_priv *bat_priv, /* return the index of the claim */ static inline uint32_t batadv_choose_claim(const void *data, uint32_t size) { - struct batadv_claim *claim = (struct batadv_claim *)data; + struct batadv_bla_claim *claim = (struct batadv_bla_claim *)data; uint32_t hash = 0; hash = batadv_hash_bytes(hash, &claim->addr, sizeof(claim->addr)); @@ -58,7 +58,7 @@ static inline uint32_t batadv_choose_claim(const void *data, uint32_t size) static inline uint32_t batadv_choose_backbone_gw(const void *data, uint32_t size) { - const struct batadv_claim *claim = (struct batadv_claim *)data; + const struct batadv_bla_claim *claim = (struct batadv_bla_claim *)data; uint32_t hash = 0; hash = batadv_hash_bytes(hash, &claim->addr, sizeof(claim->addr)); @@ -93,9 +93,9 @@ static int batadv_compare_backbone_gw(const struct hlist_node *node, static int batadv_compare_claim(const struct hlist_node *node, const void *data2) { - const void *data1 = container_of(node, struct batadv_claim, + const void *data1 = container_of(node, struct batadv_bla_claim, hash_entry); - const struct batadv_claim *cl1 = data1, *cl2 = data2; + const struct batadv_bla_claim *cl1 = data1, *cl2 = data2; if (!batadv_compare_eth(cl1->addr, cl2->addr)) return 0; @@ -117,16 +117,16 @@ batadv_backbone_gw_free_ref(struct batadv_bla_backbone_gw *backbone_gw) /* finally deinitialize the claim */ static void batadv_claim_free_rcu(struct rcu_head *rcu) { - struct batadv_claim *claim; + struct batadv_bla_claim *claim; - claim = container_of(rcu, struct batadv_claim, rcu); + claim = container_of(rcu, struct batadv_bla_claim, rcu); batadv_backbone_gw_free_ref(claim->backbone_gw); kfree(claim); } /* free a claim, call claim_free_rcu if its the last reference */ -static void batadv_claim_free_ref(struct batadv_claim *claim) +static void batadv_claim_free_ref(struct batadv_bla_claim *claim) { if (atomic_dec_and_test(&claim->refcount)) call_rcu(&claim->rcu, batadv_claim_free_rcu); @@ -138,14 +138,15 @@ static void batadv_claim_free_ref(struct batadv_claim *claim) * looks for a claim in the hash, and returns it if found * or NULL otherwise. */ -static struct batadv_claim *batadv_claim_hash_find(struct batadv_priv *bat_priv, - struct batadv_claim *data) +static struct batadv_bla_claim +*batadv_claim_hash_find(struct batadv_priv *bat_priv, + struct batadv_bla_claim *data) { struct batadv_hashtable *hash = bat_priv->bla.claim_hash; struct hlist_head *head; struct hlist_node *node; - struct batadv_claim *claim; - struct batadv_claim *claim_tmp = NULL; + struct batadv_bla_claim *claim; + struct batadv_bla_claim *claim_tmp = NULL; int index; if (!hash) @@ -222,7 +223,7 @@ batadv_bla_del_backbone_claims(struct batadv_bla_backbone_gw *backbone_gw) struct batadv_hashtable *hash; struct hlist_node *node, *node_tmp; struct hlist_head *head; - struct batadv_claim *claim; + struct batadv_bla_claim *claim; int i; spinlock_t *list_lock; /* protects write access to the hash lists */ @@ -462,7 +463,7 @@ static void batadv_bla_answer_request(struct batadv_priv *bat_priv, struct hlist_node *node; struct hlist_head *head; struct batadv_hashtable *hash; - struct batadv_claim *claim; + struct batadv_bla_claim *claim; struct batadv_bla_backbone_gw *backbone_gw; int i; @@ -552,8 +553,8 @@ static void batadv_bla_add_claim(struct batadv_priv *bat_priv, const uint8_t *mac, const short vid, struct batadv_bla_backbone_gw *backbone_gw) { - struct batadv_claim *claim; - struct batadv_claim search_claim; + struct batadv_bla_claim *claim; + struct batadv_bla_claim search_claim; int hash_added; memcpy(search_claim.addr, mac, ETH_ALEN); @@ -615,7 +616,7 @@ claim_free_ref: static void batadv_bla_del_claim(struct batadv_priv *bat_priv, const uint8_t *mac, const short vid) { - struct batadv_claim search_claim, *claim; + struct batadv_bla_claim search_claim, *claim; memcpy(search_claim.addr, mac, ETH_ALEN); search_claim.vid = vid; @@ -1011,7 +1012,7 @@ static void batadv_bla_purge_claims(struct batadv_priv *bat_priv, struct batadv_hard_iface *primary_if, int now) { - struct batadv_claim *claim; + struct batadv_bla_claim *claim; struct hlist_node *node; struct hlist_head *head; struct batadv_hashtable *hash; @@ -1434,7 +1435,7 @@ int batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb, short vid, bool is_bcast) { struct ethhdr *ethhdr; - struct batadv_claim search_claim, *claim = NULL; + struct batadv_bla_claim search_claim, *claim = NULL; struct batadv_hard_iface *primary_if; int ret; @@ -1528,7 +1529,7 @@ out: int batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb, short vid) { struct ethhdr *ethhdr; - struct batadv_claim search_claim, *claim = NULL; + struct batadv_bla_claim search_claim, *claim = NULL; struct batadv_hard_iface *primary_if; int ret = 0; @@ -1604,7 +1605,7 @@ int batadv_bla_claim_table_seq_print_text(struct seq_file *seq, void *offset) struct net_device *net_dev = (struct net_device *)seq->private; struct batadv_priv *bat_priv = netdev_priv(net_dev); struct batadv_hashtable *hash = bat_priv->bla.claim_hash; - struct batadv_claim *claim; + struct batadv_bla_claim *claim; struct batadv_hard_iface *primary_if; struct hlist_node *node; struct hlist_head *head; diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index eb3d129..549ba56 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -353,7 +353,7 @@ struct batadv_bla_backbone_gw { uint16_t crc; /* crc checksum over all claims */ }; -struct batadv_claim { +struct batadv_bla_claim { uint8_t addr[ETH_ALEN]; short vid; struct batadv_bla_backbone_gw *backbone_gw; -- cgit v0.10.2 From 88a32c9a8a3f0217430f0b67fc90e425c1ceaa7f Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 25 Dec 2012 21:45:12 +0800 Subject: batman-adv: kernel doc for types.h Thanks to Sven Eckelmann and Simon Wunderlich for their support. Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 549ba56..03197f5 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -24,6 +24,9 @@ #include "bitarray.h" #include +/** + * Maximum overhead for the encapsulation for a payload packet + */ #define BATADV_HEADER_LEN \ (ETH_HLEN + max(sizeof(struct batadv_unicast_packet), \ sizeof(struct batadv_bcast_packet))) @@ -51,6 +54,21 @@ struct batadv_hard_iface_bat_iv { atomic_t ogm_seqno; }; +/** + * struct batadv_hard_iface - network device known to batman-adv + * @list: list node for batadv_hardif_list + * @if_num: identificator of the interface + * @if_status: status of the interface for batman-adv + * @net_dev: pointer to the net_device + * @frag_seqno: last fragment sequence number sent by this interface + * @hardif_obj: kobject of the per interface sysfs "mesh" directory + * @refcount: number of contexts the object is used + * @batman_adv_ptype: packet type describing packets that should be processed by + * batman-adv for this interface + * @soft_iface: the batman-adv interface which uses this network interface + * @rcu: struct used for freeing in an RCU-safe manner + * @bat_iv: BATMAN IV specific per hard interface data + */ struct batadv_hard_iface { struct list_head list; int16_t if_num; @@ -67,17 +85,47 @@ struct batadv_hard_iface { /** * struct batadv_orig_node - structure for orig_list maintaining nodes of mesh + * @orig: originator ethernet address * @primary_addr: hosts primary interface address - * @last_seen: when last packet from this node was received + * @router: router that should be used to reach this originator + * @batadv_dat_addr_t: address of the orig node in the distributed hash + * @bcast_own: bitfield containing the number of our OGMs this orig_node + * rebroadcasted "back" to us (relative to last_real_seqno) + * @bcast_own_sum: counted result of bcast_own + * @last_seen: time when last packet from this node was received * @bcast_seqno_reset: time when the broadcast seqno window was reset * @batman_seqno_reset: time when the batman seqno window was reset * @gw_flags: flags related to gateway class * @flags: for now only VIS_SERVER flag + * @last_ttvn: last seen translation table version number + * @tt_crc: CRC of the translation table + * @tt_buff: last tt changeset this node received from the orig node + * @tt_buff_len: length of the last tt changeset this node received from the + * orig node + * @tt_buff_lock: lock that protects tt_buff and tt_buff_len + * @tt_size: number of global TT entries announced by the orig node + * @tt_initialised: bool keeping track of whether or not this node have received + * any translation table information from the orig node yet * @last_real_seqno: last and best known sequence number * @last_ttl: ttl of last received packet + * @bcast_bits: bitfield containing the info which payload broadcast originated + * from this orig node this host already has seen (relative to + * last_bcast_seqno) * @last_bcast_seqno: last broadcast sequence number received by this host - * @candidates: how many candidates are available - * @selected: next bonding candidate + * @neigh_list: list of potential next hop neighbor towards this orig node + * @frag_list: fragmentation buffer list for fragment re-assembly + * @last_frag_packet: time when last fragmented packet from this node was + * received + * @neigh_list_lock: lock protecting neigh_list, router and bonding_list + * @hash_entry: hlist node for batadv_priv::orig_hash + * @bat_priv: pointer to soft_iface this orig node belongs to + * @ogm_cnt_lock: lock protecting bcast_own, bcast_own_sum, + * neigh_node->real_bits & neigh_node->real_packet_count + * @bcast_seqno_lock: lock protecting bcast_bits & last_bcast_seqno + * @bond_candidates: how many candidates are available + * @bond_list: list of bonding candidates + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner */ struct batadv_orig_node { uint8_t orig[ETH_ALEN]; @@ -93,11 +141,11 @@ struct batadv_orig_node { unsigned long batman_seqno_reset; uint8_t gw_flags; uint8_t flags; - atomic_t last_ttvn; /* last seen translation table version number */ + atomic_t last_ttvn; uint16_t tt_crc; unsigned char *tt_buff; int16_t tt_buff_len; - spinlock_t tt_buff_lock; /* protects tt_buff */ + spinlock_t tt_buff_lock; /* protects tt_buff & tt_buff_len */ atomic_t tt_size; bool tt_initialised; uint32_t last_real_seqno; @@ -106,22 +154,31 @@ struct batadv_orig_node { uint32_t last_bcast_seqno; struct hlist_head neigh_list; struct list_head frag_list; - spinlock_t neigh_list_lock; /* protects neigh_list and router */ - atomic_t refcount; - struct rcu_head rcu; + unsigned long last_frag_packet; + /* neigh_list_lock protects: neigh_list, router & bonding_list */ + spinlock_t neigh_list_lock; struct hlist_node hash_entry; struct batadv_priv *bat_priv; - unsigned long last_frag_packet; /* ogm_cnt_lock protects: bcast_own, bcast_own_sum, - * neigh_node->real_bits, neigh_node->real_packet_count + * neigh_node->real_bits & neigh_node->real_packet_count */ spinlock_t ogm_cnt_lock; - /* bcast_seqno_lock protects bcast_bits, last_bcast_seqno */ + /* bcast_seqno_lock protects: bcast_bits & last_bcast_seqno */ spinlock_t bcast_seqno_lock; atomic_t bond_candidates; struct list_head bond_list; + atomic_t refcount; + struct rcu_head rcu; }; +/** + * struct batadv_gw_node - structure for orig nodes announcing gw capabilities + * @list: list node for batadv_priv_gw::list + * @orig_node: pointer to corresponding orig node + * @deleted: this struct is scheduled for deletion + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner + */ struct batadv_gw_node { struct hlist_node list; struct batadv_orig_node *orig_node; @@ -130,13 +187,28 @@ struct batadv_gw_node { struct rcu_head rcu; }; -/* batadv_neigh_node - * @last_seen: when last packet via this neighbor was received +/** + * struct batadv_neigh_node - structure for single hop neighbors + * @list: list node for batadv_orig_node::neigh_list + * @addr: mac address of neigh node + * @tq_recv: ring buffer of received TQ values from this neigh node + * @tq_index: ring buffer index + * @tq_avg: averaged tq of all tq values in the ring buffer (tq_recv) + * @last_ttl: last received ttl from this neigh node + * @bonding_list: list node for batadv_orig_node::bond_list + * @last_seen: when last packet via this neighbor was received + * @real_bits: bitfield containing the number of OGMs received from this neigh + * node (relative to orig_node->last_real_seqno) + * @real_packet_count: counted result of real_bits + * @orig_node: pointer to corresponding orig_node + * @if_incoming: pointer to incoming hard interface + * @lq_update_lock: lock protecting tq_recv & tq_index + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner */ struct batadv_neigh_node { struct hlist_node list; uint8_t addr[ETH_ALEN]; - uint8_t real_packet_count; uint8_t tq_recv[BATADV_TQ_GLOBAL_WINDOW_SIZE]; uint8_t tq_index; uint8_t tq_avg; @@ -144,13 +216,20 @@ struct batadv_neigh_node { struct list_head bonding_list; unsigned long last_seen; DECLARE_BITMAP(real_bits, BATADV_TQ_LOCAL_WINDOW_SIZE); - atomic_t refcount; - struct rcu_head rcu; + uint8_t real_packet_count; struct batadv_orig_node *orig_node; struct batadv_hard_iface *if_incoming; - spinlock_t lq_update_lock; /* protects: tq_recv, tq_index */ + spinlock_t lq_update_lock; /* protects tq_recv & tq_index */ + atomic_t refcount; + struct rcu_head rcu; }; +/** + * struct batadv_bcast_duplist_entry - structure for LAN broadcast suppression + * @orig[ETH_ALEN]: mac address of orig node orginating the broadcast + * @crc: crc32 checksum of broadcast payload + * @entrytime: time when the broadcast packet was received + */ #ifdef CONFIG_BATMAN_ADV_BLA struct batadv_bcast_duplist_entry { uint8_t orig[ETH_ALEN]; @@ -159,6 +238,33 @@ struct batadv_bcast_duplist_entry { }; #endif +/** + * enum batadv_counters - indices for traffic counters + * @BATADV_CNT_TX: transmitted payload traffic packet counter + * @BATADV_CNT_TX_BYTES: transmitted payload traffic bytes counter + * @BATADV_CNT_TX_DROPPED: dropped transmission payload traffic packet counter + * @BATADV_CNT_RX: received payload traffic packet counter + * @BATADV_CNT_RX_BYTES: received payload traffic bytes counter + * @BATADV_CNT_FORWARD: forwarded payload traffic packet counter + * @BATADV_CNT_FORWARD_BYTES: forwarded payload traffic bytes counter + * @BATADV_CNT_MGMT_TX: transmitted routing protocol traffic packet counter + * @BATADV_CNT_MGMT_TX_BYTES: transmitted routing protocol traffic bytes counter + * @BATADV_CNT_MGMT_RX: received routing protocol traffic packet counter + * @BATADV_CNT_MGMT_RX_BYTES: received routing protocol traffic bytes counter + * @BATADV_CNT_TT_REQUEST_TX: transmitted tt req traffic packet counter + * @BATADV_CNT_TT_REQUEST_RX: received tt req traffic packet counter + * @BATADV_CNT_TT_RESPONSE_TX: transmitted tt resp traffic packet counter + * @BATADV_CNT_TT_RESPONSE_RX: received tt resp traffic packet counter + * @BATADV_CNT_TT_ROAM_ADV_TX: transmitted tt roam traffic packet counter + * @BATADV_CNT_TT_ROAM_ADV_RX: received tt roam traffic packet counter + * @BATADV_CNT_DAT_GET_TX: transmitted dht GET traffic packet counter + * @BATADV_CNT_DAT_GET_RX: received dht GET traffic packet counter + * @BATADV_CNT_DAT_PUT_TX: transmitted dht PUT traffic packet counter + * @BATADV_CNT_DAT_PUT_RX: received dht PUT traffic packet counter + * @BATADV_CNT_DAT_CACHED_REPLY_TX: transmitted dat cache reply traffic packet + * counter + * @BATADV_CNT_NUM: number of traffic counters + */ enum batadv_counters { BATADV_CNT_TX, BATADV_CNT_TX_BYTES, @@ -190,14 +296,23 @@ enum batadv_counters { /** * struct batadv_priv_tt - per mesh interface translation table data * @vn: translation table version number + * @ogm_append_cnt: counter of number of OGMs containing the local tt diff * @local_changes: changes registered in an originator interval - * @poss_change: Detect an ongoing roaming phase. If true, then this node - * received a roaming_adv and has to inspect every packet directed to it to - * check whether it still is the true destination or not. This flag will be - * reset to false as soon as the this node's ttvn is increased * @changes_list: tracks tt local changes within an originator interval - * @req_list: list of pending tt_requests + * @local_hash: local translation table hash table + * @global_hash: global translation table hash table + * @req_list: list of pending & unanswered tt_requests + * @roam_list: list of the last roaming events of each client limiting the + * number of roaming events to avoid route flapping + * @changes_list_lock: lock protecting changes_list + * @req_list_lock: lock protecting req_list + * @roam_list_lock: lock protecting roam_list + * @local_entry_num: number of entries in the local hash table * @local_crc: Checksum of the local table, recomputed before sending a new OGM + * @last_changeset: last tt changeset this host has generated + * @last_changeset_len: length of last tt changeset this host has generated + * @last_changeset_lock: lock protecting last_changeset & last_changeset_len + * @work: work queue callback item for translation table purging */ struct batadv_priv_tt { atomic_t vn; @@ -215,24 +330,45 @@ struct batadv_priv_tt { uint16_t local_crc; unsigned char *last_changeset; int16_t last_changeset_len; - spinlock_t last_changeset_lock; /* protects last_changeset */ + /* protects last_changeset & last_changeset_len */ + spinlock_t last_changeset_lock; struct delayed_work work; }; +/** + * struct batadv_priv_bla - per mesh interface bridge loope avoidance data + * @num_requests; number of bla requests in flight + * @claim_hash: hash table containing mesh nodes this host has claimed + * @backbone_hash: hash table containing all detected backbone gateways + * @bcast_duplist: recently received broadcast packets array (for broadcast + * duplicate suppression) + * @bcast_duplist_curr: index of last broadcast packet added to bcast_duplist + * @bcast_duplist_lock: lock protecting bcast_duplist & bcast_duplist_curr + * @claim_dest: local claim data (e.g. claim group) + * @work: work queue callback item for cleanups & bla announcements + */ #ifdef CONFIG_BATMAN_ADV_BLA struct batadv_priv_bla { - atomic_t num_requests; /* number of bla requests in flight */ + atomic_t num_requests; struct batadv_hashtable *claim_hash; struct batadv_hashtable *backbone_hash; struct batadv_bcast_duplist_entry bcast_duplist[BATADV_DUPLIST_SIZE]; int bcast_duplist_curr; - /* protects bcast_duplist and bcast_duplist_curr */ + /* protects bcast_duplist & bcast_duplist_curr */ spinlock_t bcast_duplist_lock; struct batadv_bla_claim_dst claim_dest; struct delayed_work work; }; #endif +/** + * struct batadv_debug_log - debug logging data + * @log_buff: buffer holding the logs (ring bufer) + * @log_start: index of next character to read + * @log_end: index of next character to write + * @lock: lock protecting log_buff, log_start & log_end + * @queue_wait: log reader's wait queue + */ #ifdef CONFIG_BATMAN_ADV_DEBUG struct batadv_priv_debug_log { char log_buff[BATADV_LOG_BUF_LEN]; @@ -243,18 +379,34 @@ struct batadv_priv_debug_log { }; #endif +/** + * struct batadv_priv_gw - per mesh interface gateway data + * @list: list of available gateway nodes + * @list_lock: lock protecting gw_list & curr_gw + * @curr_gw: pointer to currently selected gateway node + * @reselect: bool indicating a gateway re-selection is in progress + */ struct batadv_priv_gw { struct hlist_head list; - spinlock_t list_lock; /* protects gw_list and curr_gw */ + spinlock_t list_lock; /* protects gw_list & curr_gw */ struct batadv_gw_node __rcu *curr_gw; /* rcu protected pointer */ atomic_t reselect; }; +/** + * struct batadv_priv_vis - per mesh interface vis data + * @send_list: list of batadv_vis_info packets to sent + * @hash: hash table containing vis data from other nodes in the network + * @hash_lock: lock protecting the hash table + * @list_lock: lock protecting my_info::recv_list + * @work: work queue callback item for vis packet sending + * @my_info: holds this node's vis data sent on a regular basis + */ struct batadv_priv_vis { struct list_head send_list; struct batadv_hashtable *hash; spinlock_t hash_lock; /* protects hash */ - spinlock_t list_lock; /* protects info::recv_list */ + spinlock_t list_lock; /* protects my_info::recv_list */ struct delayed_work work; struct batadv_vis_info *my_info; }; @@ -273,28 +425,70 @@ struct batadv_priv_dat { }; #endif +/** + * struct batadv_priv - per mesh interface data + * @mesh_state: current status of the mesh (inactive/active/deactivating) + * @stats: structure holding the data for the ndo_get_stats() call + * @bat_counters: mesh internal traffic statistic counters (see batadv_counters) + * @aggregated_ogms: bool indicating whether OGM aggregation is enabled + * @bonding: bool indicating whether traffic bonding is enabled + * @fragmentation: bool indicating whether traffic fragmentation is enabled + * @ap_isolation: bool indicating whether ap isolation is enabled + * @bridge_loop_avoidance: bool indicating whether bridge loop avoidance is + * enabled + * @distributed_arp_table: bool indicating whether distributed ARP table is + * enabled + * @vis_mode: vis operation: client or server (see batadv_vis_packettype) + * @gw_mode: gateway operation: off, client or server (see batadv_gw_modes) + * @gw_sel_class: gateway selection class (applies if gw_mode client) + * @gw_bandwidth: gateway announced bandwidth (applies if gw_mode server) + * @orig_interval: OGM broadcast interval in milliseconds + * @hop_penalty: penalty which will be applied to an OGM's tq-field on every hop + * @log_level: configured log level (see batadv_dbg_level) + * @bcast_seqno: last sent broadcast packet sequence number + * @bcast_queue_left: number of remaining buffered broadcast packet slots + * @batman_queue_left: number of remaining OGM packet slots + * @num_ifaces: number of interfaces assigned to this mesh interface + * @mesh_obj: kobject for sysfs mesh subdirectory + * @debug_dir: dentry for debugfs batman-adv subdirectory + * @forw_bat_list: list of aggregated OGMs that will be forwarded + * @forw_bcast_list: list of broadcast packets that will be rebroadcasted + * @orig_hash: hash table containing mesh participants (orig nodes) + * @forw_bat_list_lock: lock protecting forw_bat_list + * @forw_bcast_list_lock: lock protecting forw_bcast_list + * @orig_work: work queue callback item for orig node purging + * @primary_if: one of the hard interfaces assigned to this mesh interface + * becomes the primary interface + * @bat_algo_ops: routing algorithm used by this mesh interface + * @bla: bridge loope avoidance data + * @debug_log: holding debug logging relevant data + * @gw: gateway data + * @tt: translation table data + * @vis: vis data + * @dat: distributed arp table data + */ struct batadv_priv { atomic_t mesh_state; struct net_device_stats stats; uint64_t __percpu *bat_counters; /* Per cpu counters */ - atomic_t aggregated_ogms; /* boolean */ - atomic_t bonding; /* boolean */ - atomic_t fragmentation; /* boolean */ - atomic_t ap_isolation; /* boolean */ + atomic_t aggregated_ogms; + atomic_t bonding; + atomic_t fragmentation; + atomic_t ap_isolation; #ifdef CONFIG_BATMAN_ADV_BLA - atomic_t bridge_loop_avoidance; /* boolean */ + atomic_t bridge_loop_avoidance; #endif #ifdef CONFIG_BATMAN_ADV_DAT - atomic_t distributed_arp_table; /* boolean */ + atomic_t distributed_arp_table; #endif - atomic_t vis_mode; /* VIS_TYPE_* */ - atomic_t gw_mode; /* GW_MODE_* */ - atomic_t gw_sel_class; /* uint */ - atomic_t gw_bandwidth; /* gw bandwidth */ - atomic_t orig_interval; /* uint */ - atomic_t hop_penalty; /* uint */ + atomic_t vis_mode; + atomic_t gw_mode; + atomic_t gw_sel_class; + atomic_t gw_bandwidth; + atomic_t orig_interval; + atomic_t hop_penalty; #ifdef CONFIG_BATMAN_ADV_DEBUG - atomic_t log_level; /* uint */ + atomic_t log_level; #endif atomic_t bcast_seqno; atomic_t bcast_queue_left; @@ -324,46 +518,97 @@ struct batadv_priv { #endif }; +/** + * struct batadv_socket_client - layer2 icmp socket client data + * @queue_list: packet queue for packets destined for this socket client + * @queue_len: number of packets in the packet queue (queue_list) + * @index: socket client's index in the batadv_socket_client_hash + * @lock: lock protecting queue_list, queue_len & index + * @queue_wait: socket client's wait queue + * @bat_priv: pointer to soft_iface this client belongs to + */ struct batadv_socket_client { struct list_head queue_list; unsigned int queue_len; unsigned char index; - spinlock_t lock; /* protects queue_list, queue_len, index */ + spinlock_t lock; /* protects queue_list, queue_len & index */ wait_queue_head_t queue_wait; struct batadv_priv *bat_priv; }; +/** + * struct batadv_socket_packet - layer2 icmp packet for socket client + * @list: list node for batadv_socket_client::queue_list + * @icmp_len: size of the layer2 icmp packet + * @icmp_packet: layer2 icmp packet + */ struct batadv_socket_packet { struct list_head list; size_t icmp_len; struct batadv_icmp_packet_rr icmp_packet; }; +/** + * struct batadv_bla_backbone_gw - batman-adv gateway bridged into the LAN + * @orig: originator address of backbone node (mac address of primary iface) + * @vid: vlan id this gateway was detected on + * @hash_entry: hlist node for batadv_priv_bla::backbone_hash + * @bat_priv: pointer to soft_iface this backbone gateway belongs to + * @lasttime: last time we heard of this backbone gw + * @wait_periods: grace time for bridge forward delays and bla group forming at + * bootup phase - no bcast traffic is formwared until it has elapsed + * @request_sent: if this bool is set to true we are out of sync with this + * backbone gateway - no bcast traffic is formwared until the situation was + * resolved + * @crc: crc16 checksum over all claims + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner + */ #ifdef CONFIG_BATMAN_ADV_BLA struct batadv_bla_backbone_gw { uint8_t orig[ETH_ALEN]; - short vid; /* used VLAN ID */ + short vid; struct hlist_node hash_entry; struct batadv_priv *bat_priv; - unsigned long lasttime; /* last time we heard of this backbone gw */ + unsigned long lasttime; atomic_t wait_periods; atomic_t request_sent; + uint16_t crc; atomic_t refcount; struct rcu_head rcu; - uint16_t crc; /* crc checksum over all claims */ }; +/** + * struct batadv_bla_claim - claimed non-mesh client structure + * @addr: mac address of claimed non-mesh client + * @vid: vlan id this client was detected on + * @batadv_bla_backbone_gw: pointer to backbone gw claiming this client + * @lasttime: last time we heard of claim (locals only) + * @hash_entry: hlist node for batadv_priv_bla::claim_hash + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner + */ struct batadv_bla_claim { uint8_t addr[ETH_ALEN]; short vid; struct batadv_bla_backbone_gw *backbone_gw; - unsigned long lasttime; /* last time we heard of claim (locals only) */ + unsigned long lasttime; + struct hlist_node hash_entry; struct rcu_head rcu; atomic_t refcount; - struct hlist_node hash_entry; }; #endif +/** + * struct batadv_tt_common_entry - tt local & tt global common data + * @addr: mac address of non-mesh client + * @hash_entry: hlist node for batadv_priv_tt::local_hash or for + * batadv_priv_tt::global_hash + * @flags: various state handling flags (see batadv_tt_client_flags) + * @added_at: timestamp used for purging stale tt common entries + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner + */ struct batadv_tt_common_entry { uint8_t addr[ETH_ALEN]; struct hlist_node hash_entry; @@ -373,37 +618,76 @@ struct batadv_tt_common_entry { struct rcu_head rcu; }; +/** + * struct batadv_tt_local_entry - translation table local entry data + * @common: general translation table data + * @last_seen: timestamp used for purging stale tt local entries + */ struct batadv_tt_local_entry { struct batadv_tt_common_entry common; unsigned long last_seen; }; +/** + * struct batadv_tt_global_entry - translation table global entry data + * @common: general translation table data + * @orig_list: list of orig nodes announcing this non-mesh client + * @list_lock: lock protecting orig_list + * @roam_at: time at which TT_GLOBAL_ROAM was set + */ struct batadv_tt_global_entry { struct batadv_tt_common_entry common; struct hlist_head orig_list; - spinlock_t list_lock; /* protects the list */ - unsigned long roam_at; /* time at which TT_GLOBAL_ROAM was set */ + spinlock_t list_lock; /* protects orig_list */ + unsigned long roam_at; }; +/** + * struct batadv_tt_orig_list_entry - orig node announcing a non-mesh client + * @orig_node: pointer to orig node announcing this non-mesh client + * @ttvn: translation table version number which added the non-mesh client + * @list: list node for batadv_tt_global_entry::orig_list + * @refcount: number of contexts the object is used + * @rcu: struct used for freeing in an RCU-safe manner + */ struct batadv_tt_orig_list_entry { struct batadv_orig_node *orig_node; uint8_t ttvn; + struct hlist_node list; atomic_t refcount; struct rcu_head rcu; - struct hlist_node list; }; +/** + * struct batadv_tt_change_node - structure for tt changes occured + * @list: list node for batadv_priv_tt::changes_list + * @change: holds the actual translation table diff data + */ struct batadv_tt_change_node { struct list_head list; struct batadv_tt_change change; }; +/** + * struct batadv_tt_req_node - data to keep track of the tt requests in flight + * @addr: mac address address of the originator this request was sent to + * @issued_at: timestamp used for purging stale tt requests + * @list: list node for batadv_priv_tt::req_list + */ struct batadv_tt_req_node { uint8_t addr[ETH_ALEN]; unsigned long issued_at; struct list_head list; }; +/** + * struct batadv_tt_roam_node - roaming client data + * @addr: mac address of the client in the roaming phase + * @counter: number of allowed roaming events per client within a single + * OGM interval (changes are committed with each OGM) + * @first_time: timestamp used for purging stale roaming node entries + * @list: list node for batadv_priv_tt::roam_list + */ struct batadv_tt_roam_node { uint8_t addr[ETH_ALEN]; atomic_t counter; @@ -411,8 +695,19 @@ struct batadv_tt_roam_node { struct list_head list; }; -/* forw_packet - structure for forw_list maintaining packets to be - * send/forwarded +/** + * struct batadv_forw_packet - structure for bcast packets to be sent/forwarded + * @list: list node for batadv_socket_client::queue_list + * @send_time: execution time for delayed_work (packet sending) + * @own: bool for locally generated packets (local OGMs are re-scheduled after + * sending) + * @skb: bcast packet's skb buffer + * @packet_len: size of aggregated OGM packet inside the skb buffer + * @direct_link_flags: direct link flags for aggregated OGM packets + * @num_packets: counter for bcast packet retransmission + * @delayed_work: work queue callback item for packet sending + * @if_incoming: pointer incoming hard-iface or primary iface if locally + * generated packet */ struct batadv_forw_packet { struct hlist_node list; @@ -426,39 +721,69 @@ struct batadv_forw_packet { struct batadv_hard_iface *if_incoming; }; +/** + * struct batadv_frag_packet_list_entry - storage for fragment packet + * @list: list node for orig_node::frag_list + * @seqno: sequence number of the fragment + * @skb: fragment's skb buffer + */ struct batadv_frag_packet_list_entry { struct list_head list; uint16_t seqno; struct sk_buff *skb; }; +/** + * struct batadv_vis_info - local data for vis information + * @first_seen: timestamp used for purging stale vis info entries + * @recv_list: List of server-neighbors we have received this packet from. This + * packet should not be re-forward to them again. List elements are struct + * batadv_vis_recvlist_node + * @send_list: list of packets to be forwarded + * @refcount: number of contexts the object is used + * @hash_entry: hlist node for batadv_priv_vis::hash + * @bat_priv: pointer to soft_iface this orig node belongs to + * @skb_packet: contains the vis packet + */ struct batadv_vis_info { unsigned long first_seen; - /* list of server-neighbors we received a vis-packet - * from. we should not reply to them. - */ struct list_head recv_list; struct list_head send_list; struct kref refcount; struct hlist_node hash_entry; struct batadv_priv *bat_priv; - /* this packet might be part of the vis send queue. */ struct sk_buff *skb_packet; - /* vis_info may follow here */ } __packed; +/** + * struct batadv_vis_info_entry - contains link information for vis + * @src: source MAC of the link, all zero for local TT entry + * @dst: destination MAC of the link, client mac address for local TT entry + * @quality: transmission quality of the link, or 0 for local TT entry + */ struct batadv_vis_info_entry { uint8_t src[ETH_ALEN]; uint8_t dest[ETH_ALEN]; - uint8_t quality; /* quality = 0 client */ + uint8_t quality; } __packed; +/** + * struct batadv_vis_recvlist_node - list entry for batadv_vis_info::recv_list + * @list: list node for batadv_vis_info::recv_list + * @mac: MAC address of the originator from where the vis_info was received + */ struct batadv_vis_recvlist_node { struct list_head list; uint8_t mac[ETH_ALEN]; }; -/* While scanning for vis-entries of a particular vis-originator +/** + * struct batadv_vis_if_list_entry - auxiliary data for vis data generation + * @addr: MAC address of the interface + * @primary: true if this interface is the primary interface + * @list: list node the interface list + * + * While scanning for vis-entries of a particular vis-originator * this list collects its interfaces to create a subgraph/cluster * out of them later */ @@ -468,22 +793,26 @@ struct batadv_vis_if_list_entry { struct hlist_node list; }; +/** + * struct batadv_algo_ops - mesh algorithm callbacks + * @list: list node for the batadv_algo_list + * @name: name of the algorithm + * @bat_iface_enable: init routing info when hard-interface is enabled + * @bat_iface_disable: de-init routing info when hard-interface is disabled + * @bat_iface_update_mac: (re-)init mac addresses of the protocol information + * belonging to this hard-interface + * @bat_primary_iface_set: called when primary interface is selected / changed + * @bat_ogm_schedule: prepare a new outgoing OGM for the send queue + * @bat_ogm_emit: send scheduled OGM + */ struct batadv_algo_ops { struct hlist_node list; char *name; - /* init routing info when hard-interface is enabled */ int (*bat_iface_enable)(struct batadv_hard_iface *hard_iface); - /* de-init routing info when hard-interface is disabled */ void (*bat_iface_disable)(struct batadv_hard_iface *hard_iface); - /* (re-)init mac addresses of the protocol information - * belonging to this hard-interface - */ void (*bat_iface_update_mac)(struct batadv_hard_iface *hard_iface); - /* called when primary interface is selected / changed */ void (*bat_primary_iface_set)(struct batadv_hard_iface *hard_iface); - /* prepare a new outgoing OGM for the send queue */ void (*bat_ogm_schedule)(struct batadv_hard_iface *hard_iface); - /* send scheduled OGM */ void (*bat_ogm_emit)(struct batadv_forw_packet *forw_packet); }; -- cgit v0.10.2 From e76e4320a26ba6301dfd3e9a28a1e3faccd302ab Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 24 Dec 2012 11:14:07 +0900 Subject: batman-adv: rename random32() to prandom_u32() Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita Acked-by: Antonio Quartulli Signed-off-by: Marek Lindner Cc: Simon Wunderlich Cc: Antonio Quartulli Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: "David S. Miller" Cc: netdev@vger.kernel.org Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 8f2de43..36b9727 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -123,7 +123,7 @@ batadv_iv_ogm_emit_send_time(const struct batadv_priv *bat_priv) unsigned int msecs; msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER; - msecs += random32() % (2 * BATADV_JITTER); + msecs += prandom_u32() % (2 * BATADV_JITTER); return jiffies + msecs_to_jiffies(msecs); } @@ -131,7 +131,7 @@ batadv_iv_ogm_emit_send_time(const struct batadv_priv *bat_priv) /* when do we schedule a ogm packet to be sent */ static unsigned long batadv_iv_ogm_fwd_send_time(void) { - return jiffies + msecs_to_jiffies(random32() % (BATADV_JITTER / 2)); + return jiffies + msecs_to_jiffies(prandom_u32() % (BATADV_JITTER / 2)); } /* apply hop penalty for a normal link */ -- cgit v0.10.2 From 5bc44dc8458cbac08c664f2f337326bf87cc924b Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 11 Jan 2013 10:19:51 +0100 Subject: batman-adv: postpone sysfs removal when unregistering When processing the unregister notify for a hard interface, removing the sysfs files may lead to a circular deadlock (rtnl mutex <-> s_active). To overcome this problem, postpone the sysfs removal in a worker. Reported-by: Sasha Levin Reported-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index f1d37cd..cb3191f 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -457,6 +457,24 @@ out: batadv_hardif_free_ref(primary_if); } +/** + * batadv_hardif_remove_interface_finish - cleans up the remains of a hardif + * @work: work queue item + * + * Free the parts of the hard interface which can not be removed under + * rtnl lock (to prevent deadlock situations). + */ +static void batadv_hardif_remove_interface_finish(struct work_struct *work) +{ + struct batadv_hard_iface *hard_iface; + + hard_iface = container_of(work, struct batadv_hard_iface, + cleanup_work); + + batadv_sysfs_del_hardif(&hard_iface->hardif_obj); + batadv_hardif_free_ref(hard_iface); +} + static struct batadv_hard_iface * batadv_hardif_add_interface(struct net_device *net_dev) { @@ -484,6 +502,9 @@ batadv_hardif_add_interface(struct net_device *net_dev) hard_iface->soft_iface = NULL; hard_iface->if_status = BATADV_IF_NOT_IN_USE; INIT_LIST_HEAD(&hard_iface->list); + INIT_WORK(&hard_iface->cleanup_work, + batadv_hardif_remove_interface_finish); + /* extra reference for return */ atomic_set(&hard_iface->refcount, 2); @@ -518,8 +539,7 @@ static void batadv_hardif_remove_interface(struct batadv_hard_iface *hard_iface) return; hard_iface->if_status = BATADV_IF_TO_BE_REMOVED; - batadv_sysfs_del_hardif(&hard_iface->hardif_obj); - batadv_hardif_free_ref(hard_iface); + queue_work(batadv_event_workqueue, &hard_iface->cleanup_work); } void batadv_hardif_remove_interfaces(void) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 3d68166..c9962fe 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -449,6 +449,30 @@ static void batadv_interface_setup(struct net_device *dev) memset(priv, 0, sizeof(*priv)); } +/** + * batadv_softif_destroy_finish - cleans up the remains of a softif + * @work: work queue item + * + * Free the parts of the soft interface which can not be removed under + * rtnl lock (to prevent deadlock situations). + */ +static void batadv_softif_destroy_finish(struct work_struct *work) +{ + struct batadv_priv *bat_priv; + struct net_device *soft_iface; + + bat_priv = container_of(work, struct batadv_priv, + cleanup_work); + soft_iface = bat_priv->soft_iface; + + batadv_debugfs_del_meshif(soft_iface); + batadv_sysfs_del_meshif(soft_iface); + + rtnl_lock(); + unregister_netdevice(soft_iface); + rtnl_unlock(); +} + struct net_device *batadv_softif_create(const char *name) { struct net_device *soft_iface; @@ -463,6 +487,8 @@ struct net_device *batadv_softif_create(const char *name) goto out; bat_priv = netdev_priv(soft_iface); + bat_priv->soft_iface = soft_iface; + INIT_WORK(&bat_priv->cleanup_work, batadv_softif_destroy_finish); /* batadv_interface_stats() needs to be available as soon as * register_netdevice() has been called @@ -551,10 +577,10 @@ out: void batadv_softif_destroy(struct net_device *soft_iface) { - batadv_debugfs_del_meshif(soft_iface); - batadv_sysfs_del_meshif(soft_iface); + struct batadv_priv *bat_priv = netdev_priv(soft_iface); + batadv_mesh_free(soft_iface); - unregister_netdevice(soft_iface); + queue_work(batadv_event_workqueue, &bat_priv->cleanup_work); } int batadv_softif_is_valid(const struct net_device *net_dev) diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 03197f5..8d4a16c 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -68,6 +68,7 @@ struct batadv_hard_iface_bat_iv { * @soft_iface: the batman-adv interface which uses this network interface * @rcu: struct used for freeing in an RCU-safe manner * @bat_iv: BATMAN IV specific per hard interface data + * @cleanup_work: work queue callback item for hard interface deinit */ struct batadv_hard_iface { struct list_head list; @@ -81,6 +82,7 @@ struct batadv_hard_iface { struct net_device *soft_iface; struct rcu_head rcu; struct batadv_hard_iface_bat_iv bat_iv; + struct work_struct cleanup_work; }; /** @@ -428,6 +430,7 @@ struct batadv_priv_dat { /** * struct batadv_priv - per mesh interface data * @mesh_state: current status of the mesh (inactive/active/deactivating) + * @soft_iface: net device which holds this struct as private data * @stats: structure holding the data for the ndo_get_stats() call * @bat_counters: mesh internal traffic statistic counters (see batadv_counters) * @aggregated_ogms: bool indicating whether OGM aggregation is enabled @@ -457,6 +460,7 @@ struct batadv_priv_dat { * @forw_bat_list_lock: lock protecting forw_bat_list * @forw_bcast_list_lock: lock protecting forw_bcast_list * @orig_work: work queue callback item for orig node purging + * @cleanup_work: work queue callback item for soft interface deinit * @primary_if: one of the hard interfaces assigned to this mesh interface * becomes the primary interface * @bat_algo_ops: routing algorithm used by this mesh interface @@ -469,6 +473,7 @@ struct batadv_priv_dat { */ struct batadv_priv { atomic_t mesh_state; + struct net_device *soft_iface; struct net_device_stats stats; uint64_t __percpu *bat_counters; /* Per cpu counters */ atomic_t aggregated_ogms; @@ -502,6 +507,7 @@ struct batadv_priv { spinlock_t forw_bat_list_lock; /* protects forw_bat_list */ spinlock_t forw_bcast_list_lock; /* protects forw_bcast_list */ struct delayed_work orig_work; + struct work_struct cleanup_work; struct batadv_hard_iface __rcu *primary_if; /* rcu protected pointer */ struct batadv_algo_ops *bat_algo_ops; #ifdef CONFIG_BATMAN_ADV_BLA -- cgit v0.10.2 From 0b87393146244c2dc31cb3c69c45f4948ca94ee1 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 4 Jan 2013 03:05:31 +0100 Subject: batman-adv: update copyright years Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bat_algo.h b/net/batman-adv/bat_algo.h index a0ba3bf..a4808c2 100644 --- a/net/batman-adv/bat_algo.h +++ b/net/batman-adv/bat_algo.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2011-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 36b9727..72fe1bb 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/bitarray.c b/net/batman-adv/bitarray.c index 5453b17..9739824 100644 --- a/net/batman-adv/bitarray.c +++ b/net/batman-adv/bitarray.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2006-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2006-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich, Marek Lindner * diff --git a/net/batman-adv/bitarray.h b/net/batman-adv/bitarray.h index cebaae7..a81b932 100644 --- a/net/batman-adv/bitarray.h +++ b/net/batman-adv/bitarray.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2006-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2006-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich, Marek Lindner * diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 9971892..30f4652 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2011-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich * diff --git a/net/batman-adv/bridge_loop_avoidance.h b/net/batman-adv/bridge_loop_avoidance.h index 196d9a0..dea2fbc 100644 --- a/net/batman-adv/bridge_loop_avoidance.h +++ b/net/batman-adv/bridge_loop_avoidance.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2011-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich * diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index e47555b..6ae8651 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/debugfs.h b/net/batman-adv/debugfs.h index 3319e1f..f8c3849 100644 --- a/net/batman-adv/debugfs.h +++ b/net/batman-adv/debugfs.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 8e1d89d..7485a78 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2011-2013 B.A.T.M.A.N. contributors: * * Antonio Quartulli * diff --git a/net/batman-adv/distributed-arp-table.h b/net/batman-adv/distributed-arp-table.h index d060c03..125c8c6 100644 --- a/net/batman-adv/distributed-arp-table.h +++ b/net/batman-adv/distributed-arp-table.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2011-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2011-2013 B.A.T.M.A.N. contributors: * * Antonio Quartulli * diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index dd07c7e..074107f 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2009-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2009-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/gateway_client.h b/net/batman-adv/gateway_client.h index f0d129e..039902d 100644 --- a/net/batman-adv/gateway_client.h +++ b/net/batman-adv/gateway_client.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2009-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2009-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c index 9001208..84bb2b1 100644 --- a/net/batman-adv/gateway_common.c +++ b/net/batman-adv/gateway_common.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2009-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2009-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h index 13697f6..509b2bf 100644 --- a/net/batman-adv/gateway_common.h +++ b/net/batman-adv/gateway_common.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2009-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2009-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index cb3191f..368219e 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/hard-interface.h b/net/batman-adv/hard-interface.h index 3732366..308437d 100644 --- a/net/batman-adv/hard-interface.h +++ b/net/batman-adv/hard-interface.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/hash.c b/net/batman-adv/hash.c index 15a849c..7198daf 100644 --- a/net/batman-adv/hash.c +++ b/net/batman-adv/hash.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2006-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2006-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich, Marek Lindner * diff --git a/net/batman-adv/hash.h b/net/batman-adv/hash.h index ea02148..1b4da72 100644 --- a/net/batman-adv/hash.h +++ b/net/batman-adv/hash.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2006-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2006-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich, Marek Lindner * diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c index 87ca809..0ba6c89 100644 --- a/net/batman-adv/icmp_socket.c +++ b/net/batman-adv/icmp_socket.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/icmp_socket.h b/net/batman-adv/icmp_socket.h index 29443a1..1fcca37 100644 --- a/net/batman-adv/icmp_socket.h +++ b/net/batman-adv/icmp_socket.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index f65a222..21fe698 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index af73d60..74eb960 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 92a55fd..457ea44 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2009-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2009-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h index 9778e65..286bf74 100644 --- a/net/batman-adv/originator.h +++ b/net/batman-adv/originator.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/packet.h b/net/batman-adv/packet.h index cb6405bf..ed0aa89 100644 --- a/net/batman-adv/packet.h +++ b/net/batman-adv/packet.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/ring_buffer.c b/net/batman-adv/ring_buffer.c index c8f61e3..ccab0bb 100644 --- a/net/batman-adv/ring_buffer.c +++ b/net/batman-adv/ring_buffer.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/ring_buffer.h b/net/batman-adv/ring_buffer.h index fda8c17..3f92ae2 100644 --- a/net/batman-adv/ring_buffer.h +++ b/net/batman-adv/ring_buffer.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index db89238..60ba03f 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/routing.h b/net/batman-adv/routing.h index 9262279..99eeafa 100644 --- a/net/batman-adv/routing.h +++ b/net/batman-adv/routing.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c index 0b6f65b..80ca65f 100644 --- a/net/batman-adv/send.c +++ b/net/batman-adv/send.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/send.h b/net/batman-adv/send.h index 0078dec..38e662f 100644 --- a/net/batman-adv/send.h +++ b/net/batman-adv/send.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index c9962fe..2711e87 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/soft-interface.h b/net/batman-adv/soft-interface.h index 07a08fe..43182e5 100644 --- a/net/batman-adv/soft-interface.h +++ b/net/batman-adv/soft-interface.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 84a55cb..afbba31 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/sysfs.h b/net/batman-adv/sysfs.h index 3fd1412..479acf4 100644 --- a/net/batman-adv/sysfs.h +++ b/net/batman-adv/sysfs.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: * * Marek Lindner * diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 877acd1..fb15b4c 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich, Antonio Quartulli * diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h index 46d4451..ab8e683 100644 --- a/net/batman-adv/translation-table.h +++ b/net/batman-adv/translation-table.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich, Antonio Quartulli * diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 8d4a16c..4cd87a0 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich * diff --git a/net/batman-adv/unicast.c b/net/batman-adv/unicast.c index f56bccf..50e079f 100644 --- a/net/batman-adv/unicast.c +++ b/net/batman-adv/unicast.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: * * Andreas Langer * diff --git a/net/batman-adv/unicast.h b/net/batman-adv/unicast.h index 61abba5..429cf8a 100644 --- a/net/batman-adv/unicast.h +++ b/net/batman-adv/unicast.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: * * Andreas Langer * diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 2e70ec1..22d2785 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2008-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2008-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich * diff --git a/net/batman-adv/vis.h b/net/batman-adv/vis.h index 873282f..ad92b0e 100644 --- a/net/batman-adv/vis.h +++ b/net/batman-adv/vis.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2008-2012 B.A.T.M.A.N. contributors: +/* Copyright (C) 2008-2013 B.A.T.M.A.N. contributors: * * Simon Wunderlich, Marek Lindner * -- cgit v0.10.2 From 5ac2a177298e1f245aa54cce4030842f3abe5aea Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 3 Jan 2013 12:22:10 +0100 Subject: batman-adv: Start new development cycle Signed-off-by: Simon Wunderlich Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index 74eb960..ced08b9 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -26,7 +26,7 @@ #define BATADV_DRIVER_DEVICE "batman-adv" #ifndef BATADV_SOURCE_VERSION -#define BATADV_SOURCE_VERSION "2012.5.0" +#define BATADV_SOURCE_VERSION "2013.1.0" #endif /* B.A.T.M.A.N. parameters */ -- cgit v0.10.2 From ad327910c4686f0ad17a771d71e5e38638f71173 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 18 Jan 2013 15:36:56 +0000 Subject: net: asix: ax88772_unbind() can be static Signed-off-by: Fengguang Wu Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 37de7db..2205dbc 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -502,7 +502,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) return 0; } -void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf) +static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf) { if (dev->driver_priv) kfree(dev->driver_priv); -- cgit v0.10.2 From b27b28cb445975dc02d2e7d9437d23af76a51571 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 21 Jan 2013 02:38:38 +0900 Subject: ipv6: Make ipv6_addr_is_XXX() return boolean. ipv6_addr_is_{multicast,ll_all_nodes,ll_all_routers,isatap}() return boolean. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 7cd14c0..c6a4421 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -281,26 +281,26 @@ static inline void addrconf_addr_solict_mult(const struct in6_addr *addr, htonl(0xFF000000) | addr->s6_addr32[3]); } -static inline int ipv6_addr_is_multicast(const struct in6_addr *addr) +static inline bool ipv6_addr_is_multicast(const struct in6_addr *addr) { return (addr->s6_addr32[0] & htonl(0xFF000000)) == htonl(0xFF000000); } -static inline int ipv6_addr_is_ll_all_nodes(const struct in6_addr *addr) +static inline bool ipv6_addr_is_ll_all_nodes(const struct in6_addr *addr) { return ((addr->s6_addr32[0] ^ htonl(0xff020000)) | addr->s6_addr32[1] | addr->s6_addr32[2] | (addr->s6_addr32[3] ^ htonl(0x00000001))) == 0; } -static inline int ipv6_addr_is_ll_all_routers(const struct in6_addr *addr) +static inline bool ipv6_addr_is_ll_all_routers(const struct in6_addr *addr) { return ((addr->s6_addr32[0] ^ htonl(0xff020000)) | addr->s6_addr32[1] | addr->s6_addr32[2] | (addr->s6_addr32[3] ^ htonl(0x00000002))) == 0; } -static inline int ipv6_addr_is_isatap(const struct in6_addr *addr) +static inline bool ipv6_addr_is_isatap(const struct in6_addr *addr) { return (addr->s6_addr32[2] | htonl(0x02000000)) == htonl(0x02005EFE); } -- cgit v0.10.2 From ca97a644d752b46e5e08526e36705c3b0dd03f5f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 20 Jan 2013 07:39:00 +0000 Subject: ipv6: Introduce ipv6_addr_is_solict_mult() to check Solicited Node Multicast Addresses. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/addrconf.h b/include/net/addrconf.h index c6a4421..3a3eeb4 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -305,6 +305,14 @@ static inline bool ipv6_addr_is_isatap(const struct in6_addr *addr) return (addr->s6_addr32[2] | htonl(0x02000000)) == htonl(0x02005EFE); } +static inline bool ipv6_addr_is_solict_mult(const struct in6_addr *addr) +{ + return (addr->s6_addr32[0] == htonl(0xff020000) && + addr->s6_addr32[1] == htonl(0x00000000) && + addr->s6_addr32[2] == htonl(0x00000001) && + addr->s6_addr[12] == 0xff); +} + #ifdef CONFIG_PROC_FS extern int if6_proc_init(void); extern void if6_proc_exit(void); diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 350f860..903191a 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -685,11 +685,7 @@ static void ndisc_recv_ns(struct sk_buff *skb) * RFC2461 7.1.1: * DAD has to be destined for solicited node multicast address. */ - if (dad && - !(daddr->s6_addr32[0] == htonl(0xff020000) && - daddr->s6_addr32[1] == htonl(0x00000000) && - daddr->s6_addr32[2] == htonl(0x00000001) && - daddr->s6_addr [12] == 0xff )) { + if (dad && !ipv6_addr_is_solict_mult(daddr)) { ND_PRINTK(2, warn, "NS: bad DAD packet (wrong destination)\n"); return; } -- cgit v0.10.2 From 9d1007740041613bae8492be092932a3f0eb1ebf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 20 Jan 2013 07:39:07 +0000 Subject: ipv6: Optimize ipv6_addr_is_solict_mult(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 3a3eeb4..9dc5efc 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -307,10 +307,17 @@ static inline bool ipv6_addr_is_isatap(const struct in6_addr *addr) static inline bool ipv6_addr_is_solict_mult(const struct in6_addr *addr) { - return (addr->s6_addr32[0] == htonl(0xff020000) && - addr->s6_addr32[1] == htonl(0x00000000) && - addr->s6_addr32[2] == htonl(0x00000001) && - addr->s6_addr[12] == 0xff); +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 + __u64 *p = (__u64 *)addr; + return ((p[0] ^ cpu_to_be64(0xff02000000000000UL)) | + ((p[1] ^ cpu_to_be64(0x00000001ff000000UL)) & + cpu_to_be64(0xffffffffff000000UL))) == 0UL; +#else + return ((addr->s6_addr32[0] ^ htonl(0xff020000)) | + addr->s6_addr32[1] | + (addr->s6_addr32[2] ^ htonl(0x00000001)) | + (addr->s6_addr[12] ^ 0xff)) == 0; +#endif } #ifdef CONFIG_PROC_FS -- cgit v0.10.2 From d1641565f6926c2e9f5859d81bc6f72fc0e1ad76 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 20 Jan 2013 07:38:52 +0000 Subject: ipv6: Optimize ipv6_addr_is_ll_all_{nodes,routers}(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 9dc5efc..6c58d50 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -288,16 +288,26 @@ static inline bool ipv6_addr_is_multicast(const struct in6_addr *addr) static inline bool ipv6_addr_is_ll_all_nodes(const struct in6_addr *addr) { +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 + __u64 *p = (__u64 *)addr; + return ((p[0] ^ cpu_to_be64(0xff02000000000000UL)) | (p[1] ^ cpu_to_be64(1))) == 0UL; +#else return ((addr->s6_addr32[0] ^ htonl(0xff020000)) | addr->s6_addr32[1] | addr->s6_addr32[2] | (addr->s6_addr32[3] ^ htonl(0x00000001))) == 0; +#endif } static inline bool ipv6_addr_is_ll_all_routers(const struct in6_addr *addr) { +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64 + __u64 *p = (__u64 *)addr; + return ((p[0] ^ cpu_to_be64(0xff02000000000000UL)) | (p[1] ^ cpu_to_be64(2))) == 0UL; +#else return ((addr->s6_addr32[0] ^ htonl(0xff020000)) | addr->s6_addr32[1] | addr->s6_addr32[2] | (addr->s6_addr32[3] ^ htonl(0x00000002))) == 0; +#endif } static inline bool ipv6_addr_is_isatap(const struct in6_addr *addr) -- cgit v0.10.2 From fb568637e58a8459edd551af1160f27ea53e8367 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 20 Jan 2013 07:39:18 +0000 Subject: ndisc: Make several arguments for ndisc_send_na() boolean. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 903191a..067a0d2 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -490,7 +490,7 @@ static void __ndisc_send(struct net_device *dev, static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, const struct in6_addr *daddr, const struct in6_addr *solicited_addr, - int router, int solicited, int override, int inc_opt) + bool router, bool solicited, bool override, bool inc_opt) { struct in6_addr tmpaddr; struct inet6_ifaddr *ifp; @@ -776,11 +776,11 @@ static void ndisc_recv_ns(struct sk_buff *skb) } if (is_router < 0) - is_router = !!idev->cnf.forwarding; + is_router = idev->cnf.forwarding; if (dad) { ndisc_send_na(dev, NULL, &in6addr_linklocal_allnodes, &msg->target, - is_router, 0, (ifp != NULL), 1); + !!is_router, false, (ifp != NULL), true); goto out; } @@ -801,8 +801,8 @@ static void ndisc_recv_ns(struct sk_buff *skb) NEIGH_UPDATE_F_OVERRIDE); if (neigh || !dev->header_ops) { ndisc_send_na(dev, neigh, saddr, &msg->target, - is_router, - 1, (ifp != NULL && inc), inc); + !!is_router, + true, (ifp != NULL && inc), inc); if (neigh) neigh_release(neigh); } -- cgit v0.10.2 From 546bfedbe604baeb5a03736593bb95c9aa56bcfa Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Jan 2013 05:26:07 +0000 Subject: net/mlx4_en: remove redundant code remove redundant code from build_inline_wqe() Signed-off-by: Eric Dumazet Acked-By: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 2b799f4..16af338 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -515,10 +515,6 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk wmb(); inl->byte_count = cpu_to_be32(1 << 31 | (skb->len - spc)); } - tx_desc->ctrl.vlan_tag = cpu_to_be16(*vlan_tag); - tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * - (!!vlan_tx_tag_present(skb)); - tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f; } u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb) -- cgit v0.10.2 From 4fbc5b20e2715997a1b5e634543e8cac9aa36d4c Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 19 Jan 2013 01:32:01 +0000 Subject: usbnet: pegasus: set wakeup enable in set_wol This patch calls device_set_wakeup_enable() inside set_wol callback, so that turning on WOL from user mode utility can make the 'wakeup' of pegasus device to be enabled, then remote wakeup may be enabled before putting into sleep. Cc: Sarah Sharp Cc: Petko Manolov Signed-off-by: Ming Lei Signed-off-by: David S. Miller diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 3c02f95..8ee5ab0 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1097,6 +1097,7 @@ pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { pegasus_t *pegasus = netdev_priv(dev); u8 reg78 = 0x04; + int ret; if (wol->wolopts & ~WOL_SUPPORTED) return -EINVAL; @@ -1111,7 +1112,12 @@ pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) else pegasus->eth_regs[0] &= ~0x10; pegasus->wolopts = wol->wolopts; - return set_register(pegasus, WakeupControl, reg78); + + ret = set_register(pegasus, WakeupControl, reg78); + if (!ret) + ret = device_set_wakeup_enable(&pegasus->usb->dev, + wol->wolopts); + return ret; } static inline void pegasus_reset_wol(struct net_device *dev) -- cgit v0.10.2 From b577d7e2ad50cfbf43b648e34128a5c231cc5236 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sat, 19 Jan 2013 21:43:40 +0000 Subject: firewire net: Ensure checksumming in upper layer. It is wrong to set skb->ip_summed to CHECKSUM_UNNECESSARY unless the device has already checked it. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index e7a711f5..df6a1ca 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -520,7 +520,7 @@ static int fwnet_finish_incoming_packet(struct net_device *net, dev = netdev_priv(net); /* Write metadata, and then pass to the receive level */ skb->dev = net; - skb->ip_summed = CHECKSUM_UNNECESSARY; /* don't check it */ + skb->ip_summed = CHECKSUM_NONE; /* * Parse the encapsulation header. This actually does the job of -- cgit v0.10.2 From 825863408a1670035e7105368cbfe8b126290ba1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sat, 19 Jan 2013 22:03:07 +0000 Subject: firewire net: Use LL_RESERVED_SPACE(), HH_DATA_OFF(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index df6a1ca..2b27bff 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -270,7 +270,7 @@ static int fwnet_header_cache(const struct neighbour *neigh, if (type == cpu_to_be16(ETH_P_802_3)) return -1; net = neigh->dev; - h = (struct fwnet_header *)((u8 *)hh->hh_data + 16 - sizeof(*h)); + h = (struct fwnet_header *)((u8 *)hh->hh_data + HH_DATA_OFF(sizeof(*h))); h->h_proto = type; memcpy(h->h_dest, neigh->ha, net->addr_len); hh->hh_len = FWNET_HLEN; @@ -282,7 +282,7 @@ static int fwnet_header_cache(const struct neighbour *neigh, static void fwnet_header_cache_update(struct hh_cache *hh, const struct net_device *net, const unsigned char *haddr) { - memcpy((u8 *)hh->hh_data + 16 - FWNET_HLEN, haddr, net->addr_len); + memcpy((u8 *)hh->hh_data + HH_DATA_OFF(FWNET_HLEN), haddr, net->addr_len); } static int fwnet_header_parse(const struct sk_buff *skb, unsigned char *haddr) @@ -398,11 +398,11 @@ static struct fwnet_partial_datagram *fwnet_pd_new(struct net_device *net, new->datagram_label = datagram_label; new->datagram_size = dg_size; - new->skb = dev_alloc_skb(dg_size + net->hard_header_len + 15); + new->skb = dev_alloc_skb(dg_size + LL_RESERVED_SPACE(net)); if (new->skb == NULL) goto fail_w_fi; - skb_reserve(new->skb, (net->hard_header_len + 15) & ~15); + skb_reserve(new->skb, LL_RESERVED_SPACE(net)); new->pbuf = skb_put(new->skb, dg_size); memcpy(new->pbuf + frag_off, frag_buf, frag_len); list_add_tail(&new->pd_link, &peer->pd_list); @@ -690,14 +690,14 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, buf++; len -= RFC2374_UNFRAG_HDR_SIZE; - skb = dev_alloc_skb(len + net->hard_header_len + 15); + skb = dev_alloc_skb(len + LL_RESERVED_SPACE(net)); if (unlikely(!skb)) { dev_err(&net->dev, "out of memory\n"); net->stats.rx_dropped++; return -ENOMEM; } - skb_reserve(skb, (net->hard_header_len + 15) & ~15); + skb_reserve(skb, LL_RESERVED_SPACE(net)); memcpy(skb_put(skb, len), buf, len); return fwnet_finish_incoming_packet(net, skb, source_node_id, -- cgit v0.10.2 From 02bfd8ecf5cf980ede53e30a903b102924fc32f4 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 27 Nov 2012 09:46:17 +0100 Subject: xfrm: Remove unused defines XFRM_REPLAY_SEQ, XFRM_REPLAY_OSEQ and XFRM_REPLAY_SEQ_MASK were introduced years ago but actually never used. Signed-off-by: Steffen Klassert diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 63445ed..421f764 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -557,10 +557,6 @@ struct xfrm_migrate { }; #define XFRM_KM_TIMEOUT 30 -/* which seqno */ -#define XFRM_REPLAY_SEQ 1 -#define XFRM_REPLAY_OSEQ 2 -#define XFRM_REPLAY_SEQ_MASK 3 /* what happened */ #define XFRM_REPLAY_UPDATE XFRM_AE_CR #define XFRM_REPLAY_TIMEOUT XFRM_AE_CE -- cgit v0.10.2 From e6f30c731718db45cec380964dfee210307cfc4a Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 18 Jan 2013 07:17:30 +0000 Subject: netfilter: x_tables: add xt_bpf match Support arbitrary linux socket filter (BPF) programs as x_tables match rules. This allows for very expressive filters, and on platforms with BPF JIT appears competitive with traditional hardcoded iptables rules using the u32 match. The size of the filter has been artificially limited to 64 instructions maximum to avoid bloating the size of each rule using this new match. Signed-off-by: Willem de Bruijn Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/xt_bpf.h b/include/uapi/linux/netfilter/xt_bpf.h new file mode 100644 index 0000000..5dda450 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_bpf.h @@ -0,0 +1,17 @@ +#ifndef _XT_BPF_H +#define _XT_BPF_H + +#include +#include + +#define XT_BPF_MAX_NUM_INSTR 64 + +struct xt_bpf_info { + __u16 bpf_program_num_elem; + struct sock_filter bpf_program[XT_BPF_MAX_NUM_INSTR]; + + /* only used in the kernel */ + struct sk_filter *filter __attribute__((aligned(8))); +}; + +#endif /*_XT_BPF_H */ diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index bb48607..eb2c8eb 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -811,6 +811,15 @@ config NETFILTER_XT_MATCH_ADDRTYPE If you want to compile it as a module, say M here and read . If unsure, say `N'. +config NETFILTER_XT_MATCH_BPF + tristate '"bpf" match support' + depends on NETFILTER_ADVANCED + help + BPF matching applies a linux socket filter to each packet and + accepts those for which the filter returns non-zero. + + To compile it as a module, choose M here. If unsure, say N. + config NETFILTER_XT_MATCH_CLUSTER tristate '"cluster" match support' depends on NF_CONNTRACK diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile index b3bbda6..a1abf87 100644 --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_IDLETIMER) += xt_IDLETIMER.o # matches obj-$(CONFIG_NETFILTER_XT_MATCH_ADDRTYPE) += xt_addrtype.o +obj-$(CONFIG_NETFILTER_XT_MATCH_BPF) += xt_bpf.o obj-$(CONFIG_NETFILTER_XT_MATCH_CLUSTER) += xt_cluster.o obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o obj-$(CONFIG_NETFILTER_XT_MATCH_CONNBYTES) += xt_connbytes.o diff --git a/net/netfilter/xt_bpf.c b/net/netfilter/xt_bpf.c new file mode 100644 index 0000000..12d4da8 --- /dev/null +++ b/net/netfilter/xt_bpf.c @@ -0,0 +1,73 @@ +/* Xtables module to match packets using a BPF filter. + * Copyright 2013 Google Inc. + * Written by Willem de Bruijn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +MODULE_AUTHOR("Willem de Bruijn "); +MODULE_DESCRIPTION("Xtables: BPF filter match"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("ipt_bpf"); +MODULE_ALIAS("ip6t_bpf"); + +static int bpf_mt_check(const struct xt_mtchk_param *par) +{ + struct xt_bpf_info *info = par->matchinfo; + struct sock_fprog program; + + program.len = info->bpf_program_num_elem; + program.filter = (struct sock_filter __user *) info->bpf_program; + if (sk_unattached_filter_create(&info->filter, &program)) { + pr_info("bpf: check failed: parse error\n"); + return -EINVAL; + } + + return 0; +} + +static bool bpf_mt(const struct sk_buff *skb, struct xt_action_param *par) +{ + const struct xt_bpf_info *info = par->matchinfo; + + return SK_RUN_FILTER(info->filter, skb); +} + +static void bpf_mt_destroy(const struct xt_mtdtor_param *par) +{ + const struct xt_bpf_info *info = par->matchinfo; + sk_unattached_filter_destroy(info->filter); +} + +static struct xt_match bpf_mt_reg __read_mostly = { + .name = "bpf", + .revision = 0, + .family = NFPROTO_UNSPEC, + .checkentry = bpf_mt_check, + .match = bpf_mt, + .destroy = bpf_mt_destroy, + .matchsize = sizeof(struct xt_bpf_info), + .me = THIS_MODULE, +}; + +static int __init bpf_mt_init(void) +{ + return xt_register_match(&bpf_mt_reg); +} + +static void __exit bpf_mt_exit(void) +{ + xt_unregister_match(&bpf_mt_reg); +} + +module_init(bpf_mt_init); +module_exit(bpf_mt_exit); -- cgit v0.10.2 From e7db3cbcd6508235d63ba4a31bbd1ce4fdece6e1 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 21 Jan 2013 12:30:59 +0100 Subject: netfilter: add missing xt_bpf.h header in installation Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 08f555f..8b4bd36 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -35,6 +35,7 @@ header-y += xt_TCPOPTSTRIP.h header-y += xt_TEE.h header-y += xt_TPROXY.h header-y += xt_addrtype.h +header-y += xt_bpf.h header-y += xt_cluster.h header-y += xt_comment.h header-y += xt_connbytes.h -- cgit v0.10.2 From c9f9e0e1597f99d605212356f5a220c757d190ac Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 17 Jan 2013 23:05:08 +0000 Subject: netfilter: doc: add nf_conntrack sysctl api documentation I grepped through the code and picked bits about nf_conntrack sysctl api and put that into one documentation file. [ I have mangled this patch including comments from several grammar improvements proposed by Neal Murphy , any new grammar error is my mistake --pablo ] Signed-off-by: Jiri Pirko Signed-off-by: Pablo Neira Ayuso diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt new file mode 100644 index 0000000..70da508 --- /dev/null +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -0,0 +1,176 @@ +/proc/sys/net/netfilter/nf_conntrack_* Variables: + +nf_conntrack_acct - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + Enable connection tracking flow accounting. 64-bit byte and packet + counters per flow are added. + +nf_conntrack_buckets - INTEGER (read-only) + Size of hash table. If not specified as parameter during module + loading, the default size is calculated by dividing total memory + by 16384 to determine the number of buckets but the hash table will + never have fewer than 32 or more than 16384 buckets. + +nf_conntrack_checksum - BOOLEAN + 0 - disabled + not 0 - enabled (default) + + Verify checksum of incoming packets. Packets with bad checksums are + in INVALID state. If this is enabled, such packets will not be + considered for connection tracking. + +nf_conntrack_count - INTEGER (read-only) + Number of currently allocated flow entries. + +nf_conntrack_events - BOOLEAN + 0 - disabled + not 0 - enabled (default) + + If this option is enabled, the connection tracking code will + provide userspace with connection tracking events via ctnetlink. + +nf_conntrack_events_retry_timeout - INTEGER (seconds) + default 15 + + This option is only relevant when "reliable connection tracking + events" are used. Normally, ctnetlink is "lossy", that is, + events are normally dropped when userspace listeners can't keep up. + + Userspace can request "reliable event mode". When this mode is + active, the conntrack will only be destroyed after the event was + delivered. If event delivery fails, the kernel periodically + re-tries to send the event to userspace. + + This is the maximum interval the kernel should use when re-trying + to deliver the destroy event. + + A higher number means there will be fewer delivery retries and it + will take longer for a backlog to be processed. + +nf_conntrack_expect_max - INTEGER + Maximum size of expectation table. Default value is + nf_conntrack_buckets / 256. Minimum is 1. + +nf_conntrack_frag6_high_thresh - INTEGER + default 262144 + + Maximum memory used to reassemble IPv6 fragments. When + nf_conntrack_frag6_high_thresh bytes of memory is allocated for this + purpose, the fragment handler will toss packets until + nf_conntrack_frag6_low_thresh is reached. + +nf_conntrack_frag6_low_thresh - INTEGER + default 196608 + + See nf_conntrack_frag6_low_thresh + +nf_conntrack_frag6_timeout - INTEGER (seconds) + default 60 + + Time to keep an IPv6 fragment in memory. + +nf_conntrack_generic_timeout - INTEGER (seconds) + default 600 + + Default for generic timeout. This refers to layer 4 unknown/unsupported + protocols. + +nf_conntrack_helper - BOOLEAN + 0 - disabled + not 0 - enabled (default) + + Enable automatic conntrack helper assignment. + +nf_conntrack_icmp_timeout - INTEGER (seconds) + default 30 + + Default for ICMP timeout. + +nf_conntrack_icmpv6_timeout - INTEGER (seconds) + default 30 + + Default for ICMP6 timeout. + +nf_conntrack_log_invalid - INTEGER + 0 - disable (default) + 1 - log ICMP packets + 6 - log TCP packets + 17 - log UDP packets + 33 - log DCCP packets + 41 - log ICMPv6 packets + 136 - log UDPLITE packets + 255 - log packets of any protocol + + Log invalid packets of a type specified by value. + +nf_conntrack_max - INTEGER + Size of connection tracking table. Default value is + nf_conntrack_buckets value * 4. + +nf_conntrack_tcp_be_liberal - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + Be conservative in what you do, be liberal in what you accept from others. + If it's non-zero, we mark only out of window RST segments as INVALID. + +nf_conntrack_tcp_loose - BOOLEAN + 0 - disabled + not 0 - enabled (default) + + If it is set to zero, we disable picking up already established + connections. + +nf_conntrack_tcp_max_retrans - INTEGER + default 3 + + Maximum number of packets that can be retransmitted without + received an (acceptable) ACK from the destination. If this number + is reached, a shorter timer will be started. + +nf_conntrack_tcp_timeout_close - INTEGER (seconds) + default 10 + +nf_conntrack_tcp_timeout_close_wait - INTEGER (seconds) + default 60 + +nf_conntrack_tcp_timeout_established - INTEGER (seconds) + default 432000 (5 days) + +nf_conntrack_tcp_timeout_fin_wait - INTEGER (seconds) + default 120 + +nf_conntrack_tcp_timeout_last_ack - INTEGER (seconds) + default 30 + +nf_conntrack_tcp_timeout_max_retrans - INTEGER (seconds) + default 300 + +nf_conntrack_tcp_timeout_syn_recv - INTEGER (seconds) + default 60 + +nf_conntrack_tcp_timeout_syn_sent - INTEGER (seconds) + default 120 + +nf_conntrack_tcp_timeout_time_wait - INTEGER (seconds) + default 120 + +nf_conntrack_tcp_timeout_unacknowledged - INTEGER (seconds) + default 300 + +nf_conntrack_timestamp - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + Enable connection tracking flow timestamping. + +nf_conntrack_udp_timeout - INTEGER (seconds) + default 30 + +nf_conntrack_udp_timeout_stream2 - INTEGER (seconds) + default 180 + + This extended timeout will be used in case there is an UDP stream + detected. -- cgit v0.10.2 From 8a454ab95e5ccbffd04363e9c028f60739bc3fa4 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 21 Jan 2013 13:02:19 +0100 Subject: netfilter: add missing xt_connlabel.h header in installation In (c539f01 netfilter: add connlabel conntrack extension), it was missing the change to the Kbuild file to install the header in the system. Reported-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 8b4bd36..4111577 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -39,6 +39,7 @@ header-y += xt_bpf.h header-y += xt_cluster.h header-y += xt_comment.h header-y += xt_connbytes.h +header-y += xt_connlabel.h header-y += xt_connlimit.h header-y += xt_connmark.h header-y += xt_conntrack.h -- cgit v0.10.2 From 7373470202a3c98e1a338bf1acf51247cd100868 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 21 Jan 2013 10:38:39 +0100 Subject: net: ethernet: davinci: Fix build breakage The correct name of the transmit DMA channel field in struct emac_priv is txchan, not txch. Signed-off-by: Thierry Reding Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 1c97c81..242ec55 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1102,7 +1102,7 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) /* If there is no more tx desc left free then we need to * tell the kernel to stop sending us tx frames. */ - if (unlikely(cpdma_check_free_tx_desc(priv->txch))) + if (unlikely(cpdma_check_free_tx_desc(priv->txchan))) netif_stop_queue(ndev); return NETDEV_TX_OK; -- cgit v0.10.2 From 315ff09dbaebc6061948102d7ed8781d4ee46f36 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:47:50 +0000 Subject: ndisc: Reduce number of arguments for ndisc_fill_addr_option(). Add pointer to struct net_device (dev) and remove data_len (= dev->addr_len) and addr_type (= dev->type). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 067a0d2..49dfc2a 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -148,10 +148,11 @@ static inline int ndisc_opt_addr_space(struct net_device *dev) return NDISC_OPT_SPACE(dev->addr_len + ndisc_addr_option_pad(dev->type)); } -static u8 *ndisc_fill_addr_option(u8 *opt, int type, void *data, int data_len, - unsigned short addr_type) +static u8 *ndisc_fill_addr_option(u8 *opt, int type, void *data, + struct net_device *dev) { - int pad = ndisc_addr_option_pad(addr_type); + int pad = ndisc_addr_option_pad(dev->type); + int data_len = dev->addr_len; int space = NDISC_OPT_SPACE(data_len + pad); opt[0] = type; @@ -420,8 +421,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, } if (llinfo) - ndisc_fill_addr_option(opt, llinfo, dev->dev_addr, - dev->addr_len, dev->type); + ndisc_fill_addr_option(opt, llinfo, dev->dev_addr, dev); hdr->icmp6_cksum = csum_ipv6_magic(saddr, daddr, len, IPPROTO_ICMPV6, @@ -1469,8 +1469,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) */ if (ha) - opt = ndisc_fill_addr_option(opt, ND_OPT_TARGET_LL_ADDR, ha, - dev->addr_len, dev->type); + opt = ndisc_fill_addr_option(opt, ND_OPT_TARGET_LL_ADDR, ha, dev); /* * build redirect option and copy skb over to the new packet. -- cgit v0.10.2 From c558e9fca876d6d0463a7c337d2291774b9c6f96 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:47:56 +0000 Subject: ndisc: Move ndisc_opt_addr_space() to include/net/ndisc.h. This also makes ndisc_opt_addr_data() and ndisc_fill_addr_option() use ndisc_opt_addr_space(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ndisc.h b/include/net/ndisc.h index ec48f42..745bf74 100644 --- a/include/net/ndisc.h +++ b/include/net/ndisc.h @@ -127,13 +127,19 @@ static int ndisc_addr_option_pad(unsigned short type) } } +static inline int ndisc_opt_addr_space(struct net_device *dev) +{ + return NDISC_OPT_SPACE(dev->addr_len + + ndisc_addr_option_pad(dev->type)); +} + static inline u8 *ndisc_opt_addr_data(struct nd_opt_hdr *p, struct net_device *dev) { u8 *lladdr = (u8 *)(p + 1); int lladdrlen = p->nd_opt_len << 3; int prepad = ndisc_addr_option_pad(dev->type); - if (lladdrlen != NDISC_OPT_SPACE(dev->addr_len + prepad)) + if (lladdrlen != ndisc_opt_addr_space(dev)) return NULL; return lladdr + prepad; } diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 49dfc2a..82ccf0a 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -143,17 +143,12 @@ struct neigh_table nd_tbl = { .gc_thresh3 = 1024, }; -static inline int ndisc_opt_addr_space(struct net_device *dev) -{ - return NDISC_OPT_SPACE(dev->addr_len + ndisc_addr_option_pad(dev->type)); -} - static u8 *ndisc_fill_addr_option(u8 *opt, int type, void *data, struct net_device *dev) { int pad = ndisc_addr_option_pad(dev->type); int data_len = dev->addr_len; - int space = NDISC_OPT_SPACE(data_len + pad); + int space = ndisc_opt_addr_space(dev); opt[0] = type; opt[1] = space>>3; -- cgit v0.10.2 From 6bce6b4e16e46cc860175b9e10a283194ef9f004 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:03 +0000 Subject: ndisc: Use skb_linearize() instead of pskb_may_pull(skb, skb->len). Suggested by Eric Dumazet . Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 82ccf0a..539b2ec 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1509,7 +1509,7 @@ int ndisc_rcv(struct sk_buff *skb) { struct nd_msg *msg; - if (!pskb_may_pull(skb, skb->len)) + if (skb_linearize(skb)) return 0; msg = (struct nd_msg *)skb_transport_header(skb); -- cgit v0.10.2 From 9c86dafe94f03679b77d85915e65da1304005a7c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:09 +0000 Subject: ndisc: Introduce ndisc_fill_redirect_hdr_option(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 539b2ec..53a545f 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1341,6 +1341,19 @@ static void ndisc_redirect_rcv(struct sk_buff *skb) icmpv6_notify(skb, NDISC_REDIRECT, 0, 0); } +static u8 *ndisc_fill_redirect_hdr_option(u8 *opt, struct sk_buff *orig_skb, + int rd_len) +{ + memset(opt, 0, 8); + *(opt++) = ND_OPT_REDIRECT_HDR; + *(opt++) = (rd_len >> 3); + opt += 6; + + memcpy(opt, ipv6_hdr(orig_skb), rd_len - 8); + + return opt + rd_len - 8; +} + void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) { struct net_device *dev = skb->dev; @@ -1470,12 +1483,8 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) * build redirect option and copy skb over to the new packet. */ - memset(opt, 0, 8); - *(opt++) = ND_OPT_REDIRECT_HDR; - *(opt++) = (rd_len >> 3); - opt += 6; - - memcpy(opt, ipv6_hdr(skb), rd_len - 8); + if (rd_len) + opt = ndisc_fill_redirect_hdr_option(opt, skb, rd_len); msg->icmph.icmp6_cksum = csum_ipv6_magic(&saddr_buf, &ipv6_hdr(skb)->saddr, len, IPPROTO_ICMPV6, -- cgit v0.10.2 From de09334b9326632bbf1a74bfd8b01866cbbf2f61 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:14 +0000 Subject: ndisc: Introduce ndisc_alloc_skb() helper. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 53a545f..1776a0d 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -366,6 +366,29 @@ static void pndisc_destructor(struct pneigh_entry *n) ipv6_dev_mc_dec(dev, &maddr); } +static struct sk_buff *ndisc_alloc_skb(struct net_device *dev, + int len) +{ + int hlen = LL_RESERVED_SPACE(dev); + int tlen = dev->needed_tailroom; + struct sock *sk = dev_net(dev)->ipv6.ndisc_sk; + struct sk_buff *skb; + int err; + + skb = sock_alloc_send_skb(sk, + hlen + sizeof(struct ipv6hdr) + len + tlen, + 1, &err); + if (!skb) { + ND_PRINTK(0, err, "ndisc: %s failed to allocate an skb, err=%d\n", + __func__, err); + return NULL; + } + + skb_reserve(skb, hlen); + + return skb; +} + static struct sk_buff *ndisc_build_skb(struct net_device *dev, const struct in6_addr *daddr, const struct in6_addr *saddr, @@ -377,10 +400,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, struct sock *sk = net->ipv6.ndisc_sk; struct sk_buff *skb; struct icmp6hdr *hdr; - int hlen = LL_RESERVED_SPACE(dev); - int tlen = dev->needed_tailroom; int len; - int err; u8 *opt; if (!dev->addr_len) @@ -390,17 +410,10 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (llinfo) len += ndisc_opt_addr_space(dev); - skb = sock_alloc_send_skb(sk, - (sizeof(struct ipv6hdr) + - len + hlen + tlen), - 1, &err); - if (!skb) { - ND_PRINTK(0, err, "ND: %s failed to allocate an skb, err=%d\n", - __func__, err); + skb = ndisc_alloc_skb(dev, len); + if (!skb) return NULL; - } - skb_reserve(skb, hlen); ip6_nd_hdr(sk, skb, dev, saddr, daddr, IPPROTO_ICMPV6, len); skb->transport_header = skb->tail; @@ -1369,7 +1382,6 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) struct inet6_dev *idev; struct flowi6 fl6; u8 *opt; - int hlen, tlen; int rd_len; int err; u8 ha_buf[MAX_ADDR_LEN], *ha = NULL; @@ -1439,20 +1451,10 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) rd_len &= ~0x7; len += rd_len; - hlen = LL_RESERVED_SPACE(dev); - tlen = dev->needed_tailroom; - buff = sock_alloc_send_skb(sk, - (sizeof(struct ipv6hdr) + - len + hlen + tlen), - 1, &err); - if (buff == NULL) { - ND_PRINTK(0, err, - "Redirect: %s failed to allocate an skb, err=%d\n", - __func__, err); + buff = ndisc_alloc_skb(dev, len); + if (!buff) goto release; - } - skb_reserve(buff, hlen); ip6_nd_hdr(sk, buff, dev, &saddr_buf, &ipv6_hdr(skb)->saddr, IPPROTO_ICMPV6, len); -- cgit v0.10.2 From 2576f17dfad402e2446244238ed22dddf35c2e53 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:19 +0000 Subject: ipv6: Unshare ip6_nd_hdr() and change return type to void. - move ip6_nd_hdr() to its users' source files. In net/ipv6/mcast.c, it will be called ip6_mc_hdr(). - make return type to void since this function never fails. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 464c6f7..c1878f7 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -661,13 +661,6 @@ extern int ip6_xmit(struct sock *sk, struct ipv6_txoptions *opt, int tclass); -extern int ip6_nd_hdr(struct sock *sk, - struct sk_buff *skb, - struct net_device *dev, - const struct in6_addr *saddr, - const struct in6_addr *daddr, - int proto, int len); - extern int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr); extern int ip6_append_data(struct sock *sk, diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index b0895f5..7eee94c 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -254,39 +254,6 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6, EXPORT_SYMBOL(ip6_xmit); -/* - * To avoid extra problems ND packets are send through this - * routine. It's code duplication but I really want to avoid - * extra checks since ipv6_build_header is used by TCP (which - * is for us performance critical) - */ - -int ip6_nd_hdr(struct sock *sk, struct sk_buff *skb, struct net_device *dev, - const struct in6_addr *saddr, const struct in6_addr *daddr, - int proto, int len) -{ - struct ipv6_pinfo *np = inet6_sk(sk); - struct ipv6hdr *hdr; - - skb->protocol = htons(ETH_P_IPV6); - skb->dev = dev; - - skb_reset_network_header(skb); - skb_put(skb, sizeof(struct ipv6hdr)); - hdr = ipv6_hdr(skb); - - ip6_flow_hdr(hdr, 0, 0); - - hdr->payload_len = htons(len); - hdr->nexthdr = proto; - hdr->hop_limit = np->hop_limit; - - hdr->saddr = *saddr; - hdr->daddr = *daddr; - - return 0; -} - static int ip6_call_ra_chain(struct sk_buff *skb, int sel) { struct ip6_ra_chain *ra; diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 587a845..f25002a 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1313,6 +1313,31 @@ mld_scount(struct ifmcaddr6 *pmc, int type, int gdeleted, int sdeleted) return scount; } +static void ip6_mc_hdr(struct sock *sk, struct sk_buff *skb, + struct net_device *dev, + const struct in6_addr *saddr, + const struct in6_addr *daddr, + int proto, int len) +{ + struct ipv6hdr *hdr; + + skb->protocol = htons(ETH_P_IPV6); + skb->dev = dev; + + skb_reset_network_header(skb); + skb_put(skb, sizeof(struct ipv6hdr)); + hdr = ipv6_hdr(skb); + + ip6_flow_hdr(hdr, 0, 0); + + hdr->payload_len = htons(len); + hdr->nexthdr = proto; + hdr->hop_limit = inet6_sk(sk)->hop_limit; + + hdr->saddr = *saddr; + hdr->daddr = *daddr; +} + static struct sk_buff *mld_newpack(struct net_device *dev, int size) { struct net *net = dev_net(dev); @@ -1348,7 +1373,7 @@ static struct sk_buff *mld_newpack(struct net_device *dev, int size) } else saddr = &addr_buf; - ip6_nd_hdr(sk, skb, dev, saddr, &mld2_all_mcr, NEXTHDR_HOP, 0); + ip6_mc_hdr(sk, skb, dev, saddr, &mld2_all_mcr, NEXTHDR_HOP, 0); memcpy(skb_put(skb, sizeof(ra)), ra, sizeof(ra)); @@ -1740,7 +1765,7 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type) } else saddr = &addr_buf; - ip6_nd_hdr(sk, skb, dev, saddr, snd_addr, NEXTHDR_HOP, payload_len); + ip6_mc_hdr(sk, skb, dev, saddr, snd_addr, NEXTHDR_HOP, payload_len); memcpy(skb_put(skb, sizeof(ra)), ra, sizeof(ra)); diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 1776a0d..7ce266f 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -389,6 +389,31 @@ static struct sk_buff *ndisc_alloc_skb(struct net_device *dev, return skb; } +static void ip6_nd_hdr(struct sock *sk, + struct sk_buff *skb, struct net_device *dev, + const struct in6_addr *saddr, + const struct in6_addr *daddr, + int proto, int len) +{ + struct ipv6hdr *hdr; + + skb->protocol = htons(ETH_P_IPV6); + skb->dev = dev; + + skb_reset_network_header(skb); + skb_put(skb, sizeof(struct ipv6hdr)); + hdr = ipv6_hdr(skb); + + ip6_flow_hdr(hdr, 0, 0); + + hdr->payload_len = htons(len); + hdr->nexthdr = proto; + hdr->hop_limit = inet6_sk(sk)->hop_limit; + + hdr->saddr = *saddr; + hdr->daddr = *daddr; +} + static struct sk_buff *ndisc_build_skb(struct net_device *dev, const struct in6_addr *daddr, const struct in6_addr *saddr, -- cgit v0.10.2 From c8d6c380d9463e1405d821db7071e39f63acfb28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:24 +0000 Subject: ndisc: Simplify arguments for ip6_nd_hdr(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 7ce266f..05c6996 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -389,11 +389,10 @@ static struct sk_buff *ndisc_alloc_skb(struct net_device *dev, return skb; } -static void ip6_nd_hdr(struct sock *sk, - struct sk_buff *skb, struct net_device *dev, +static void ip6_nd_hdr(struct sk_buff *skb, struct net_device *dev, const struct in6_addr *saddr, const struct in6_addr *daddr, - int proto, int len) + int hop_limit, int len) { struct ipv6hdr *hdr; @@ -407,8 +406,8 @@ static void ip6_nd_hdr(struct sock *sk, ip6_flow_hdr(hdr, 0, 0); hdr->payload_len = htons(len); - hdr->nexthdr = proto; - hdr->hop_limit = inet6_sk(sk)->hop_limit; + hdr->nexthdr = IPPROTO_ICMPV6; + hdr->hop_limit = hop_limit; hdr->saddr = *saddr; hdr->daddr = *daddr; @@ -439,7 +438,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (!skb) return NULL; - ip6_nd_hdr(sk, skb, dev, saddr, daddr, IPPROTO_ICMPV6, len); + ip6_nd_hdr(skb, dev, saddr, daddr, inet6_sk(sk)->hop_limit, len); skb->transport_header = skb->tail; skb_put(skb, len); @@ -1480,8 +1479,8 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (!buff) goto release; - ip6_nd_hdr(sk, buff, dev, &saddr_buf, &ipv6_hdr(skb)->saddr, - IPPROTO_ICMPV6, len); + ip6_nd_hdr(buff, dev, &saddr_buf, &ipv6_hdr(skb)->saddr, + inet6_sk(sk)->hop_limit, len); skb_set_transport_header(buff, skb_tail_pointer(buff) - buff->data); skb_put(buff, len); -- cgit v0.10.2 From f382d03ad003815be6dc268711659d4475fb7d28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:29 +0000 Subject: ndisc: Set skb->dev and skb->protocol inside ndisc_alloc_skb(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 05c6996..ed3ba8e 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -384,21 +384,21 @@ static struct sk_buff *ndisc_alloc_skb(struct net_device *dev, return NULL; } + skb->protocol = htons(ETH_P_IPV6); + skb->dev = dev; + skb_reserve(skb, hlen); return skb; } -static void ip6_nd_hdr(struct sk_buff *skb, struct net_device *dev, +static void ip6_nd_hdr(struct sk_buff *skb, const struct in6_addr *saddr, const struct in6_addr *daddr, int hop_limit, int len) { struct ipv6hdr *hdr; - skb->protocol = htons(ETH_P_IPV6); - skb->dev = dev; - skb_reset_network_header(skb); skb_put(skb, sizeof(struct ipv6hdr)); hdr = ipv6_hdr(skb); @@ -438,7 +438,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (!skb) return NULL; - ip6_nd_hdr(skb, dev, saddr, daddr, inet6_sk(sk)->hop_limit, len); + ip6_nd_hdr(skb, saddr, daddr, inet6_sk(sk)->hop_limit, len); skb->transport_header = skb->tail; skb_put(skb, len); @@ -1479,7 +1479,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (!buff) goto release; - ip6_nd_hdr(buff, dev, &saddr_buf, &ipv6_hdr(skb)->saddr, + ip6_nd_hdr(buff, &saddr_buf, &ipv6_hdr(skb)->saddr, inet6_sk(sk)->hop_limit, len); skb_set_transport_header(buff, skb_tail_pointer(buff) - buff->data); -- cgit v0.10.2 From af9a997629488ba5f92dc3d76e1ec51fcd759c5d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:34 +0000 Subject: ndisc: Remove dev argument for ndisc_send_skb(). Since we have skb->dev, use it. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index ed3ba8e..200b2b2 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -463,14 +463,14 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, return skb; } -static void ndisc_send_skb(struct sk_buff *skb, struct net_device *dev, +static void ndisc_send_skb(struct sk_buff *skb, const struct in6_addr *daddr, const struct in6_addr *saddr, struct icmp6hdr *icmp6h) { struct flowi6 fl6; struct dst_entry *dst; - struct net *net = dev_net(dev); + struct net *net = dev_net(skb->dev); struct sock *sk = net->ipv6.ndisc_sk; struct inet6_dev *idev; int err; @@ -478,8 +478,8 @@ static void ndisc_send_skb(struct sk_buff *skb, struct net_device *dev, type = icmp6h->icmp6_type; - icmpv6_flow_init(sk, &fl6, type, saddr, daddr, dev->ifindex); - dst = icmp6_dst_alloc(dev, &fl6); + icmpv6_flow_init(sk, &fl6, type, saddr, daddr, skb->dev->ifindex); + dst = icmp6_dst_alloc(skb->dev, &fl6); if (IS_ERR(dst)) { kfree_skb(skb); return; @@ -516,7 +516,7 @@ static void __ndisc_send(struct net_device *dev, if (!skb) return; - ndisc_send_skb(skb, dev, daddr, saddr, icmp6h); + ndisc_send_skb(skb, daddr, saddr, icmp6h); } static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, -- cgit v0.10.2 From 527a150fb2292a59ca0545dace8d482581253532 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:39 +0000 Subject: ndisc: Defer building IPv6 header. Build ICMPv6 message first and make buffer management easier; we can use skb->len when filling checksum in ICMPv6 header, and then build IP header with length field. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 200b2b2..09171fd 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -387,7 +387,7 @@ static struct sk_buff *ndisc_alloc_skb(struct net_device *dev, skb->protocol = htons(ETH_P_IPV6); skb->dev = dev; - skb_reserve(skb, hlen); + skb_reserve(skb, hlen + sizeof(struct ipv6hdr)); return skb; } @@ -399,8 +399,8 @@ static void ip6_nd_hdr(struct sk_buff *skb, { struct ipv6hdr *hdr; + skb_push(skb, sizeof(*hdr)); skb_reset_network_header(skb); - skb_put(skb, sizeof(struct ipv6hdr)); hdr = ipv6_hdr(skb); ip6_flow_hdr(hdr, 0, 0); @@ -438,8 +438,6 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (!skb) return NULL; - ip6_nd_hdr(skb, saddr, daddr, inet6_sk(sk)->hop_limit, len); - skb->transport_header = skb->tail; skb_put(skb, len); @@ -455,10 +453,12 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (llinfo) ndisc_fill_addr_option(opt, llinfo, dev->dev_addr, dev); - hdr->icmp6_cksum = csum_ipv6_magic(saddr, daddr, len, + hdr->icmp6_cksum = csum_ipv6_magic(saddr, daddr, skb->len, IPPROTO_ICMPV6, csum_partial(hdr, - len, 0)); + skb->len, 0)); + + ip6_nd_hdr(skb, saddr, daddr, inet6_sk(sk)->hop_limit, skb->len); return skb; } @@ -1479,9 +1479,6 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (!buff) goto release; - ip6_nd_hdr(buff, &saddr_buf, &ipv6_hdr(skb)->saddr, - inet6_sk(sk)->hop_limit, len); - skb_set_transport_header(buff, skb_tail_pointer(buff) - buff->data); skb_put(buff, len); msg = (struct rd_msg *)icmp6_hdr(buff); @@ -1513,8 +1510,11 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) opt = ndisc_fill_redirect_hdr_option(opt, skb, rd_len); msg->icmph.icmp6_cksum = csum_ipv6_magic(&saddr_buf, &ipv6_hdr(skb)->saddr, - len, IPPROTO_ICMPV6, - csum_partial(msg, len, 0)); + buff->len, IPPROTO_ICMPV6, + csum_partial(msg, buff->len, 0)); + + ip6_nd_hdr(buff, &saddr_buf, &ipv6_hdr(skb)->saddr, + inet6_sk(sk)->hop_limit, buff->len); skb_dst_set(buff, dst); rcu_read_lock(); -- cgit v0.10.2 From 5135e633f92ab4deb3600a30cbbec6e0929fc8a4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:44 +0000 Subject: ndisc: Reset skb->trasport_headner inside ndisc_alloc_send_skb(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 09171fd..62b1415 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -388,6 +388,7 @@ static struct sk_buff *ndisc_alloc_skb(struct net_device *dev, skb->dev = dev; skb_reserve(skb, hlen + sizeof(struct ipv6hdr)); + skb_reset_transport_header(skb); return skb; } @@ -438,7 +439,6 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (!skb) return NULL; - skb->transport_header = skb->tail; skb_put(skb, len); hdr = (struct icmp6hdr *)skb_transport_header(skb); @@ -1479,7 +1479,6 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (!buff) goto release; - skb_set_transport_header(buff, skb_tail_pointer(buff) - buff->data); skb_put(buff, len); msg = (struct rd_msg *)icmp6_hdr(buff); -- cgit v0.10.2 From 2ce13576144ade3e9340efce9620a6dd338aedc7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:49 +0000 Subject: ndisc: Calculate message body length and option length separately. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 62b1415..c2b16ff 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -426,6 +426,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, struct sk_buff *skb; struct icmp6hdr *hdr; int len; + int optlen = 0; u8 *opt; if (!dev->addr_len) @@ -433,13 +434,13 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, len = sizeof(struct icmp6hdr) + (target ? sizeof(*target) : 0); if (llinfo) - len += ndisc_opt_addr_space(dev); + optlen += ndisc_opt_addr_space(dev); - skb = ndisc_alloc_skb(dev, len); + skb = ndisc_alloc_skb(dev, len + optlen); if (!skb) return NULL; - skb_put(skb, len); + skb_put(skb, len + optlen); hdr = (struct icmp6hdr *)skb_transport_header(skb); memcpy(hdr, icmp6h, sizeof(*hdr)); @@ -1396,7 +1397,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) struct net_device *dev = skb->dev; struct net *net = dev_net(dev); struct sock *sk = net->ipv6.ndisc_sk; - int len = sizeof(struct rd_msg); + int optlen = 0; struct inet_peer *peer; struct sk_buff *buff; struct rd_msg *msg; @@ -1463,7 +1464,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) memcpy(ha_buf, neigh->ha, dev->addr_len); read_unlock_bh(&neigh->lock); ha = ha_buf; - len += ndisc_opt_addr_space(dev); + optlen += ndisc_opt_addr_space(dev); } else read_unlock_bh(&neigh->lock); @@ -1471,15 +1472,16 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) } rd_len = min_t(unsigned int, - IPV6_MIN_MTU-sizeof(struct ipv6hdr)-len, skb->len + 8); + IPV6_MIN_MTU - sizeof(struct ipv6hdr) - sizeof(*msg) - optlen, + skb->len + 8); rd_len &= ~0x7; - len += rd_len; + optlen += rd_len; - buff = ndisc_alloc_skb(dev, len); + buff = ndisc_alloc_skb(dev, sizeof(*msg) + optlen); if (!buff) goto release; - skb_put(buff, len); + skb_put(buff, sizeof(*msg) + optlen); msg = (struct rd_msg *)icmp6_hdr(buff); memset(&msg->icmph, 0, sizeof(struct icmp6hdr)); -- cgit v0.10.2 From 5f5a0115635bf678d267cbc72169a718e8724d03 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:53 +0000 Subject: ndisc: Make ndisc_fill_xxx_option() for sk_buff. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index c2b16ff..ed78644 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -143,12 +143,12 @@ struct neigh_table nd_tbl = { .gc_thresh3 = 1024, }; -static u8 *ndisc_fill_addr_option(u8 *opt, int type, void *data, - struct net_device *dev) +static void ndisc_fill_addr_option(struct sk_buff *skb, int type, void *data) { - int pad = ndisc_addr_option_pad(dev->type); - int data_len = dev->addr_len; - int space = ndisc_opt_addr_space(dev); + int pad = ndisc_addr_option_pad(skb->dev->type); + int data_len = skb->dev->addr_len; + int space = ndisc_opt_addr_space(skb->dev); + u8 *opt = skb_put(skb, space); opt[0] = type; opt[1] = space>>3; @@ -162,7 +162,6 @@ static u8 *ndisc_fill_addr_option(u8 *opt, int type, void *data, opt += data_len; if ((space -= data_len) > 0) memset(opt, 0, space); - return opt + space; } static struct nd_opt_hdr *ndisc_next_option(struct nd_opt_hdr *cur, @@ -440,7 +439,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (!skb) return NULL; - skb_put(skb, len + optlen); + skb_put(skb, len); hdr = (struct icmp6hdr *)skb_transport_header(skb); memcpy(hdr, icmp6h, sizeof(*hdr)); @@ -452,7 +451,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, } if (llinfo) - ndisc_fill_addr_option(opt, llinfo, dev->dev_addr, dev); + ndisc_fill_addr_option(skb, llinfo, dev->dev_addr); hdr->icmp6_cksum = csum_ipv6_magic(saddr, daddr, skb->len, IPPROTO_ICMPV6, @@ -1379,17 +1378,18 @@ static void ndisc_redirect_rcv(struct sk_buff *skb) icmpv6_notify(skb, NDISC_REDIRECT, 0, 0); } -static u8 *ndisc_fill_redirect_hdr_option(u8 *opt, struct sk_buff *orig_skb, - int rd_len) +static void ndisc_fill_redirect_hdr_option(struct sk_buff *skb, + struct sk_buff *orig_skb, + int rd_len) { + u8 *opt = skb_put(skb, rd_len); + memset(opt, 0, 8); *(opt++) = ND_OPT_REDIRECT_HDR; *(opt++) = (rd_len >> 3); opt += 6; memcpy(opt, ipv6_hdr(orig_skb), rd_len - 8); - - return opt + rd_len - 8; } void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) @@ -1406,7 +1406,6 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) struct dst_entry *dst; struct inet6_dev *idev; struct flowi6 fl6; - u8 *opt; int rd_len; int err; u8 ha_buf[MAX_ADDR_LEN], *ha = NULL; @@ -1481,7 +1480,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (!buff) goto release; - skb_put(buff, sizeof(*msg) + optlen); + skb_put(buff, sizeof(*msg)); msg = (struct rd_msg *)icmp6_hdr(buff); memset(&msg->icmph, 0, sizeof(struct icmp6hdr)); @@ -1494,21 +1493,19 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) msg->target = *target; msg->dest = ipv6_hdr(skb)->daddr; - opt = msg->opt; - /* * include target_address option */ if (ha) - opt = ndisc_fill_addr_option(opt, ND_OPT_TARGET_LL_ADDR, ha, dev); + ndisc_fill_addr_option(skb, ND_OPT_TARGET_LL_ADDR, ha); /* * build redirect option and copy skb over to the new packet. */ if (rd_len) - opt = ndisc_fill_redirect_hdr_option(opt, skb, rd_len); + ndisc_fill_redirect_hdr_option(buff, skb, rd_len); msg->icmph.icmp6_cksum = csum_ipv6_magic(&saddr_buf, &ipv6_hdr(skb)->saddr, buff->len, IPPROTO_ICMPV6, -- cgit v0.10.2 From aa4bdd4b3f43274252c1280f6464850b0f004fc8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:48:58 +0000 Subject: ndisc: Remove icmp6h argument from ndisc_send_skb(). skb_transport_header() (thus icmp6_hdr()) is available here, use it. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index ed78644..f0c436b 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -465,8 +465,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, static void ndisc_send_skb(struct sk_buff *skb, const struct in6_addr *daddr, - const struct in6_addr *saddr, - struct icmp6hdr *icmp6h) + const struct in6_addr *saddr) { struct flowi6 fl6; struct dst_entry *dst; @@ -474,6 +473,7 @@ static void ndisc_send_skb(struct sk_buff *skb, struct sock *sk = net->ipv6.ndisc_sk; struct inet6_dev *idev; int err; + struct icmp6hdr *icmp6h = icmp6_hdr(skb); u8 type; type = icmp6h->icmp6_type; @@ -516,7 +516,7 @@ static void __ndisc_send(struct net_device *dev, if (!skb) return; - ndisc_send_skb(skb, daddr, saddr, icmp6h); + ndisc_send_skb(skb, daddr, saddr); } static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, -- cgit v0.10.2 From f4de84c64e3d801965ee4c6dadd19b76b9424bbf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:49:03 +0000 Subject: ndisc: Use ndisc_send_skb() for redirect. Reuse dst if one is attached with skb. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index f0c436b..437781c 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -467,10 +467,8 @@ static void ndisc_send_skb(struct sk_buff *skb, const struct in6_addr *daddr, const struct in6_addr *saddr) { - struct flowi6 fl6; - struct dst_entry *dst; + struct dst_entry *dst = skb_dst(skb); struct net *net = dev_net(skb->dev); - struct sock *sk = net->ipv6.ndisc_sk; struct inet6_dev *idev; int err; struct icmp6hdr *icmp6h = icmp6_hdr(skb); @@ -478,14 +476,19 @@ static void ndisc_send_skb(struct sk_buff *skb, type = icmp6h->icmp6_type; - icmpv6_flow_init(sk, &fl6, type, saddr, daddr, skb->dev->ifindex); - dst = icmp6_dst_alloc(skb->dev, &fl6); - if (IS_ERR(dst)) { - kfree_skb(skb); - return; - } + if (!dst) { + struct sock *sk = net->ipv6.ndisc_sk; + struct flowi6 fl6; - skb_dst_set(skb, dst); + icmpv6_flow_init(sk, &fl6, type, saddr, daddr, skb->dev->ifindex); + dst = icmp6_dst_alloc(skb->dev, &fl6); + if (IS_ERR(dst)) { + kfree_skb(skb); + return; + } + + skb_dst_set(skb, dst); + } rcu_read_lock(); idev = __in6_dev_get(dst->dev); @@ -1404,10 +1407,8 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) struct in6_addr saddr_buf; struct rt6_info *rt; struct dst_entry *dst; - struct inet6_dev *idev; struct flowi6 fl6; int rd_len; - int err; u8 ha_buf[MAX_ADDR_LEN], *ha = NULL; bool ret; @@ -1515,17 +1516,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) inet6_sk(sk)->hop_limit, buff->len); skb_dst_set(buff, dst); - rcu_read_lock(); - idev = __in6_dev_get(dst->dev); - IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len); - err = NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT, buff, NULL, dst->dev, - dst_output); - if (!err) { - ICMP6MSGOUT_INC_STATS(net, idev, NDISC_REDIRECT); - ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS); - } - - rcu_read_unlock(); + ndisc_send_skb(buff, &ipv6_hdr(skb)->saddr, &saddr_buf); return; release: -- cgit v0.10.2 From 7b3d9b06d8b6407fe25e00e627b48ec0d4a2a076 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:49:08 +0000 Subject: ndisc: Fill in ICMPv6 checksum and IPv6 header in ndisc_send_skb(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 437781c..dda4add 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -420,8 +420,6 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, const struct in6_addr *target, int llinfo) { - struct net *net = dev_net(dev); - struct sock *sk = net->ipv6.ndisc_sk; struct sk_buff *skb; struct icmp6hdr *hdr; int len; @@ -453,13 +451,6 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev, if (llinfo) ndisc_fill_addr_option(skb, llinfo, dev->dev_addr); - hdr->icmp6_cksum = csum_ipv6_magic(saddr, daddr, skb->len, - IPPROTO_ICMPV6, - csum_partial(hdr, - skb->len, 0)); - - ip6_nd_hdr(skb, saddr, daddr, inet6_sk(sk)->hop_limit, skb->len); - return skb; } @@ -469,6 +460,7 @@ static void ndisc_send_skb(struct sk_buff *skb, { struct dst_entry *dst = skb_dst(skb); struct net *net = dev_net(skb->dev); + struct sock *sk = net->ipv6.ndisc_sk; struct inet6_dev *idev; int err; struct icmp6hdr *icmp6h = icmp6_hdr(skb); @@ -490,6 +482,13 @@ static void ndisc_send_skb(struct sk_buff *skb, skb_dst_set(skb, dst); } + icmp6h->icmp6_cksum = csum_ipv6_magic(saddr, daddr, skb->len, + IPPROTO_ICMPV6, + csum_partial(icmp6h, + skb->len, 0)); + + ip6_nd_hdr(skb, saddr, daddr, inet6_sk(sk)->hop_limit, skb->len); + rcu_read_lock(); idev = __in6_dev_get(dst->dev); IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len); @@ -1508,13 +1507,6 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (rd_len) ndisc_fill_redirect_hdr_option(buff, skb, rd_len); - msg->icmph.icmp6_cksum = csum_ipv6_magic(&saddr_buf, &ipv6_hdr(skb)->saddr, - buff->len, IPPROTO_ICMPV6, - csum_partial(msg, buff->len, 0)); - - ip6_nd_hdr(buff, &saddr_buf, &ipv6_hdr(skb)->saddr, - inet6_sk(sk)->hop_limit, buff->len); - skb_dst_set(buff, dst); ndisc_send_skb(buff, &ipv6_hdr(skb)->saddr, &saddr_buf); return; -- cgit v0.10.2 From b44b5f4ae96de87e458ef73fc01e7ec0dbac10c0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:49:13 +0000 Subject: ndisc: Break down __ndisc_send(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index dda4add..79a56a7 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -503,29 +503,12 @@ static void ndisc_send_skb(struct sk_buff *skb, rcu_read_unlock(); } -/* - * Send a Neighbour Discover packet - */ -static void __ndisc_send(struct net_device *dev, - const struct in6_addr *daddr, - const struct in6_addr *saddr, - struct icmp6hdr *icmp6h, const struct in6_addr *target, - int llinfo) -{ - struct sk_buff *skb; - - skb = ndisc_build_skb(dev, daddr, saddr, icmp6h, target, llinfo); - if (!skb) - return; - - ndisc_send_skb(skb, daddr, saddr); -} - static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, const struct in6_addr *daddr, const struct in6_addr *solicited_addr, bool router, bool solicited, bool override, bool inc_opt) { + struct sk_buff *skb; struct in6_addr tmpaddr; struct inet6_ifaddr *ifp; const struct in6_addr *src_addr; @@ -553,8 +536,12 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, icmp6h.icmp6_solicited = solicited; icmp6h.icmp6_override = override; - __ndisc_send(dev, daddr, src_addr, &icmp6h, solicited_addr, - inc_opt ? ND_OPT_TARGET_LL_ADDR : 0); + skb = ndisc_build_skb(dev, daddr, src_addr, &icmp6h, solicited_addr, + inc_opt ? ND_OPT_TARGET_LL_ADDR : 0); + if (!skb) + return; + + ndisc_send_skb(skb, daddr, src_addr); } static void ndisc_send_unsol_na(struct net_device *dev) @@ -582,6 +569,7 @@ void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh, const struct in6_addr *solicit, const struct in6_addr *daddr, const struct in6_addr *saddr) { + struct sk_buff *skb; struct in6_addr addr_buf; struct icmp6hdr icmp6h = { .icmp6_type = NDISC_NEIGHBOUR_SOLICITATION, @@ -594,13 +582,18 @@ void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh, saddr = &addr_buf; } - __ndisc_send(dev, daddr, saddr, &icmp6h, solicit, - !ipv6_addr_any(saddr) ? ND_OPT_SOURCE_LL_ADDR : 0); + skb = ndisc_build_skb(dev, daddr, saddr, &icmp6h, solicit, + !ipv6_addr_any(saddr) ? ND_OPT_SOURCE_LL_ADDR : 0); + if (!skb) + return; + + ndisc_send_skb(skb, daddr, saddr); } void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr, const struct in6_addr *daddr) { + struct sk_buff *skb; struct icmp6hdr icmp6h = { .icmp6_type = NDISC_ROUTER_SOLICITATION, }; @@ -628,8 +621,12 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr, } } #endif - __ndisc_send(dev, daddr, saddr, &icmp6h, NULL, - send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0); + skb = ndisc_build_skb(dev, daddr, saddr, &icmp6h, NULL, + send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0); + if (!skb) + return; + + ndisc_send_skb(skb, daddr, saddr); } -- cgit v0.10.2 From 1cb3fe513f62ca7c5963d551e01d75aa4f6ca72a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:49:17 +0000 Subject: ndisc: Break down ndisc_build_skb() and build message directly. Construct NS/NA/RS message directly using C99 compound literals. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 79a56a7..1c01566 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -413,47 +413,6 @@ static void ip6_nd_hdr(struct sk_buff *skb, hdr->daddr = *daddr; } -static struct sk_buff *ndisc_build_skb(struct net_device *dev, - const struct in6_addr *daddr, - const struct in6_addr *saddr, - struct icmp6hdr *icmp6h, - const struct in6_addr *target, - int llinfo) -{ - struct sk_buff *skb; - struct icmp6hdr *hdr; - int len; - int optlen = 0; - u8 *opt; - - if (!dev->addr_len) - llinfo = 0; - - len = sizeof(struct icmp6hdr) + (target ? sizeof(*target) : 0); - if (llinfo) - optlen += ndisc_opt_addr_space(dev); - - skb = ndisc_alloc_skb(dev, len + optlen); - if (!skb) - return NULL; - - skb_put(skb, len); - - hdr = (struct icmp6hdr *)skb_transport_header(skb); - memcpy(hdr, icmp6h, sizeof(*hdr)); - - opt = skb_transport_header(skb) + sizeof(struct icmp6hdr); - if (target) { - *(struct in6_addr *)opt = *target; - opt += sizeof(*target); - } - - if (llinfo) - ndisc_fill_addr_option(skb, llinfo, dev->dev_addr); - - return skb; -} - static void ndisc_send_skb(struct sk_buff *skb, const struct in6_addr *daddr, const struct in6_addr *saddr) @@ -512,9 +471,8 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, struct in6_addr tmpaddr; struct inet6_ifaddr *ifp; const struct in6_addr *src_addr; - struct icmp6hdr icmp6h = { - .icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT, - }; + struct nd_msg *msg; + int optlen = 0; /* for anycast or proxy, solicited_addr != src_addr */ ifp = ipv6_get_ifaddr(dev_net(dev), solicited_addr, dev, 1); @@ -532,15 +490,31 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, src_addr = &tmpaddr; } - icmp6h.icmp6_router = router; - icmp6h.icmp6_solicited = solicited; - icmp6h.icmp6_override = override; + if (!dev->addr_len) + inc_opt = 0; + if (inc_opt) + optlen += ndisc_opt_addr_space(dev); - skb = ndisc_build_skb(dev, daddr, src_addr, &icmp6h, solicited_addr, - inc_opt ? ND_OPT_TARGET_LL_ADDR : 0); + skb = ndisc_alloc_skb(dev, sizeof(*msg) + optlen); if (!skb) return; + msg = (struct nd_msg *)skb_put(skb, sizeof(*msg)); + *msg = (struct nd_msg) { + .icmph = { + .icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT, + .icmp6_router = router, + .icmp6_solicited = solicited, + .icmp6_override = override, + }, + .target = *solicited_addr, + }; + + if (inc_opt) + ndisc_fill_addr_option(skb, ND_OPT_TARGET_LL_ADDR, + dev->dev_addr); + + ndisc_send_skb(skb, daddr, src_addr); } @@ -571,9 +545,9 @@ void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh, { struct sk_buff *skb; struct in6_addr addr_buf; - struct icmp6hdr icmp6h = { - .icmp6_type = NDISC_NEIGHBOUR_SOLICITATION, - }; + int inc_opt = dev->addr_len; + int optlen = 0; + struct nd_msg *msg; if (saddr == NULL) { if (ipv6_get_lladdr(dev, &addr_buf, @@ -582,11 +556,27 @@ void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh, saddr = &addr_buf; } - skb = ndisc_build_skb(dev, daddr, saddr, &icmp6h, solicit, - !ipv6_addr_any(saddr) ? ND_OPT_SOURCE_LL_ADDR : 0); + if (ipv6_addr_any(saddr)) + inc_opt = 0; + if (inc_opt) + optlen += ndisc_opt_addr_space(dev); + + skb = ndisc_alloc_skb(dev, sizeof(*msg) + optlen); if (!skb) return; + msg = (struct nd_msg *)skb_put(skb, sizeof(*msg)); + *msg = (struct nd_msg) { + .icmph = { + .icmp6_type = NDISC_NEIGHBOUR_SOLICITATION, + }, + .target = *solicit, + }; + + if (inc_opt) + ndisc_fill_addr_option(skb, ND_OPT_SOURCE_LL_ADDR, + dev->dev_addr); + ndisc_send_skb(skb, daddr, saddr); } @@ -594,10 +584,9 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr, const struct in6_addr *daddr) { struct sk_buff *skb; - struct icmp6hdr icmp6h = { - .icmp6_type = NDISC_ROUTER_SOLICITATION, - }; + struct rs_msg *msg; int send_sllao = dev->addr_len; + int optlen = 0; #ifdef CONFIG_IPV6_OPTIMISTIC_DAD /* @@ -621,11 +610,26 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr, } } #endif - skb = ndisc_build_skb(dev, daddr, saddr, &icmp6h, NULL, - send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0); + if (!dev->addr_len) + send_sllao = 0; + if (send_sllao) + optlen += ndisc_opt_addr_space(dev); + + skb = ndisc_alloc_skb(dev, sizeof(*msg) + optlen); if (!skb) return; + msg = (struct rs_msg *)skb_put(skb, sizeof(*msg)); + *msg = (struct rs_msg) { + .icmph = { + .icmp6_type = NDISC_ROUTER_SOLICITATION, + }, + }; + + if (send_sllao) + ndisc_fill_addr_option(skb, ND_OPT_SOURCE_LL_ADDR, + dev->dev_addr); + ndisc_send_skb(skb, daddr, saddr); } -- cgit v0.10.2 From 4d5c152e8694b57094e320060be4621dee5779dd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 06:49:25 +0000 Subject: ndisc: Use compound literals to build redirect message. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 1c01566..76ef435 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1481,18 +1481,14 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) if (!buff) goto release; - skb_put(buff, sizeof(*msg)); - msg = (struct rd_msg *)icmp6_hdr(buff); - - memset(&msg->icmph, 0, sizeof(struct icmp6hdr)); - msg->icmph.icmp6_type = NDISC_REDIRECT; - - /* - * copy target and destination addresses - */ - - msg->target = *target; - msg->dest = ipv6_hdr(skb)->daddr; + msg = (struct rd_msg *)skb_put(buff, sizeof(*msg)); + *msg = (struct rd_msg) { + .icmph = { + .icmp6_type = NDISC_REDIRECT, + }, + .target = *target, + .dest = ipv6_hdr(skb)->daddr, + }; /* * include target_address option -- cgit v0.10.2 From 6ebb7f8d79d16e9e921bc1112171faa93a9102ed Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 21 Jan 2013 02:30:18 +0000 Subject: qeth: Fix retry logic in hardsetup The previous code did never retry any idx setup unless retries were done for device offline/online at the beginning of the function. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 029a7ac..1ea6b70 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4765,14 +4765,14 @@ static struct ccw_driver qeth_ccw_driver = { int qeth_core_hardsetup_card(struct qeth_card *card) { - int retries = 0; + int retries = 3; int rc; QETH_DBF_TEXT(SETUP, 2, "hrdsetup"); atomic_set(&card->force_alloc_skb, 0); qeth_update_from_chp_desc(card); retry: - if (retries) + if (retries < 3) QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n", dev_name(&card->gdev->dev)); ccw_device_set_offline(CARD_DDEV(card)); @@ -4794,7 +4794,7 @@ retriable: return rc; } else if (rc) { QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (++retries > 3) + if (--retries < 0) goto out; else goto retry; -- cgit v0.10.2 From eb3fb0baa2369595fa5cbfadc16f87f99a71ce4b Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 21 Jan 2013 02:30:19 +0000 Subject: qeth: Remove unused exports Remove exports that are not used anywhere else. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 480fbea..7f526bf 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -909,9 +909,6 @@ struct qeth_cmd_buffer *qeth_wait_for_buffer(struct qeth_channel *); int qeth_mdio_read(struct net_device *, int, int); int qeth_snmp_command(struct qeth_card *, char __user *); int qeth_query_oat_command(struct qeth_card *, char __user *); -struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *, __u32, __u32); -int qeth_default_setadapterparms_cb(struct qeth_card *, struct qeth_reply *, - unsigned long); int qeth_send_control_data(struct qeth_card *, int, struct qeth_cmd_buffer *, int (*reply_cb)(struct qeth_card *, struct qeth_reply*, unsigned long), void *reply_param); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 1ea6b70..db077c4 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2868,7 +2868,7 @@ int qeth_send_startlan(struct qeth_card *card) } EXPORT_SYMBOL_GPL(qeth_send_startlan); -int qeth_default_setadapterparms_cb(struct qeth_card *card, +static int qeth_default_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) { struct qeth_ipa_cmd *cmd; @@ -2881,7 +2881,6 @@ int qeth_default_setadapterparms_cb(struct qeth_card *card, cmd->data.setadapterparms.hdr.return_code; return 0; } -EXPORT_SYMBOL_GPL(qeth_default_setadapterparms_cb); static int qeth_query_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) @@ -2901,7 +2900,7 @@ static int qeth_query_setadapterparms_cb(struct qeth_card *card, return qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd); } -struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *card, +static struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *card, __u32 command, __u32 cmdlen) { struct qeth_cmd_buffer *iob; @@ -2917,7 +2916,6 @@ struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *card, return iob; } -EXPORT_SYMBOL_GPL(qeth_get_adapter_cmd); int qeth_query_setadapterparms(struct qeth_card *card) { -- cgit v0.10.2 From 0f54761d167f98dd93cb19a16edbc47bb6574a28 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 21 Jan 2013 02:30:20 +0000 Subject: qeth: Support VEPA mode The existing port isolation mode 'forward' will now verify that the adjacent switch port supports the required reflective relay (RR) mode. This patch adds the required error handling for the cases where enabling port isolation mode 'forward' can now fail. Furthermore, once established, we never fall back from one of the port isolation modes to a non-isolated mode without further user-interaction. This includes cases where the isolation mode was enabled successfully, but ceases to work e.g. due to configuration changes at the switch port. Finally, configuring an isolation mode with the device being offline will make onlining the device fail permanently upon errors encountered until either errors are resolved or the isolation mode is changed by the user to a different mode. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 7f526bf..d690b33 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -678,6 +678,7 @@ struct qeth_card_options { int performance_stats; int rx_sg_cb; enum qeth_ipa_isolation_modes isolation; + enum qeth_ipa_isolation_modes prev_isolation; int sniffer; enum qeth_cq cq; char hsuid[9]; @@ -789,6 +790,7 @@ struct qeth_card { struct qeth_rx rx; struct delayed_work buffer_reclaim_work; int reclaim_index; + struct work_struct close_dev_work; }; struct qeth_card_list_struct { @@ -925,12 +927,13 @@ void qeth_core_get_strings(struct net_device *, u32, u8 *); void qeth_core_get_drvinfo(struct net_device *, struct ethtool_drvinfo *); void qeth_dbf_longtext(debug_info_t *id, int level, char *text, ...); int qeth_core_ethtool_get_settings(struct net_device *, struct ethtool_cmd *); -int qeth_set_access_ctrl_online(struct qeth_card *card); +int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback); int qeth_hdr_chk_and_bounce(struct sk_buff *, int); int qeth_configure_cq(struct qeth_card *, enum qeth_cq); int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action); int qeth_query_ipassists(struct qeth_card *, enum qeth_prot_versions prot); void qeth_trace_features(struct qeth_card *); +void qeth_close_dev(struct qeth_card *); /* exports for OSN */ int qeth_osn_assist(struct net_device *, void *, int); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index db077c4..1cccbad 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -68,6 +68,27 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, enum qeth_qdio_buffer_states newbufstate); static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *, int); +static struct workqueue_struct *qeth_wq; + +static void qeth_close_dev_handler(struct work_struct *work) +{ + struct qeth_card *card; + + card = container_of(work, struct qeth_card, close_dev_work); + QETH_CARD_TEXT(card, 2, "cldevhdl"); + rtnl_lock(); + dev_close(card->dev); + rtnl_unlock(); + ccwgroup_set_offline(card->gdev); +} + +void qeth_close_dev(struct qeth_card *card) +{ + QETH_CARD_TEXT(card, 2, "cldevsubm"); + queue_work(qeth_wq, &card->close_dev_work); +} +EXPORT_SYMBOL_GPL(qeth_close_dev); + static inline const char *qeth_get_cardname(struct qeth_card *card) { if (card->info.guestlan) { @@ -542,11 +563,23 @@ static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card, } else { switch (cmd->hdr.command) { case IPA_CMD_STOPLAN: - dev_warn(&card->gdev->dev, + if (cmd->hdr.return_code == + IPA_RC_VEPA_TO_VEB_TRANSITION) { + dev_err(&card->gdev->dev, + "Interface %s is down because the " + "adjacent port is no longer in " + "reflective relay mode\n", + QETH_CARD_IFNAME(card)); + qeth_close_dev(card); + } else { + dev_warn(&card->gdev->dev, "The link for interface %s on CHPID" " 0x%X failed\n", QETH_CARD_IFNAME(card), card->info.chpid); + qeth_issue_ipa_msg(cmd, + cmd->hdr.return_code, card); + } card->lan_online = 0; if (card->dev && netif_carrier_ok(card->dev)) netif_carrier_off(card->dev); @@ -1416,6 +1449,7 @@ static int qeth_setup_card(struct qeth_card *card) /* init QDIO stuff */ qeth_init_qdio_info(card); INIT_DELAYED_WORK(&card->buffer_reclaim_work, qeth_buffer_reclaim_work); + INIT_WORK(&card->close_dev_work, qeth_close_dev_handler); return 0; } @@ -4057,6 +4091,7 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, { struct qeth_ipa_cmd *cmd; struct qeth_set_access_ctrl *access_ctrl_req; + int fallback = *(int *)reply->param; QETH_CARD_TEXT(card, 4, "setaccb"); @@ -4066,12 +4101,14 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, QETH_DBF_TEXT_(SETUP, 2, "%s", card->gdev->dev.kobj.name); QETH_DBF_TEXT_(SETUP, 2, "rc=%d", cmd->data.setadapterparms.hdr.return_code); + if (cmd->data.setadapterparms.hdr.return_code != + SET_ACCESS_CTRL_RC_SUCCESS) + QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%s,%d)==%d\n", + card->gdev->dev.kobj.name, + access_ctrl_req->subcmd_code, + cmd->data.setadapterparms.hdr.return_code); switch (cmd->data.setadapterparms.hdr.return_code) { case SET_ACCESS_CTRL_RC_SUCCESS: - case SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED: - case SET_ACCESS_CTRL_RC_ALREADY_ISOLATED: - { - card->options.isolation = access_ctrl_req->subcmd_code; if (card->options.isolation == ISOLATION_MODE_NONE) { dev_info(&card->gdev->dev, "QDIO data connection isolation is deactivated\n"); @@ -4079,72 +4116,64 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, dev_info(&card->gdev->dev, "QDIO data connection isolation is activated\n"); } - QETH_DBF_MESSAGE(3, "OK:SET_ACCESS_CTRL(%s, %d)==%d\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); break; - } + case SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED: + QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already " + "deactivated\n", dev_name(&card->gdev->dev)); + if (fallback) + card->options.isolation = card->options.prev_isolation; + break; + case SET_ACCESS_CTRL_RC_ALREADY_ISOLATED: + QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already" + " activated\n", dev_name(&card->gdev->dev)); + if (fallback) + card->options.isolation = card->options.prev_isolation; + break; case SET_ACCESS_CTRL_RC_NOT_SUPPORTED: - { - QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%s,%d)==%d\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); dev_err(&card->gdev->dev, "Adapter does not " "support QDIO data connection isolation\n"); - - /* ensure isolation mode is "none" */ - card->options.isolation = ISOLATION_MODE_NONE; break; - } case SET_ACCESS_CTRL_RC_NONE_SHARED_ADAPTER: - { - QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_MODE(%s,%d)==%d\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); dev_err(&card->gdev->dev, "Adapter is dedicated. " "QDIO data connection isolation not supported\n"); - - /* ensure isolation mode is "none" */ - card->options.isolation = ISOLATION_MODE_NONE; + if (fallback) + card->options.isolation = card->options.prev_isolation; break; - } case SET_ACCESS_CTRL_RC_ACTIVE_CHECKSUM_OFF: - { - QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_MODE(%s,%d)==%d\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); dev_err(&card->gdev->dev, "TSO does not permit QDIO data connection isolation\n"); - - /* ensure isolation mode is "none" */ - card->options.isolation = ISOLATION_MODE_NONE; + if (fallback) + card->options.isolation = card->options.prev_isolation; + break; + case SET_ACCESS_CTRL_RC_REFLREL_UNSUPPORTED: + dev_err(&card->gdev->dev, "The adjacent switch port does not " + "support reflective relay mode\n"); + if (fallback) + card->options.isolation = card->options.prev_isolation; + break; + case SET_ACCESS_CTRL_RC_REFLREL_FAILED: + dev_err(&card->gdev->dev, "The reflective relay mode cannot be " + "enabled at the adjacent switch port"); + if (fallback) + card->options.isolation = card->options.prev_isolation; + break; + case SET_ACCESS_CTRL_RC_REFLREL_DEACT_FAILED: + dev_warn(&card->gdev->dev, "Turning off reflective relay mode " + "at the adjacent switch failed\n"); break; - } default: - { /* this should never happen */ - QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_MODE(%s,%d)==%d" - "==UNKNOWN\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); - - /* ensure isolation mode is "none" */ - card->options.isolation = ISOLATION_MODE_NONE; + if (fallback) + card->options.isolation = card->options.prev_isolation; break; } - } qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd); return 0; } static int qeth_setadpparms_set_access_ctrl(struct qeth_card *card, - enum qeth_ipa_isolation_modes isolation) + enum qeth_ipa_isolation_modes isolation, int fallback) { int rc; struct qeth_cmd_buffer *iob; @@ -4164,12 +4193,12 @@ static int qeth_setadpparms_set_access_ctrl(struct qeth_card *card, access_ctrl_req->subcmd_code = isolation; rc = qeth_send_ipa_cmd(card, iob, qeth_setadpparms_set_access_ctrl_cb, - NULL); + &fallback); QETH_DBF_TEXT_(SETUP, 2, "rc=%d", rc); return rc; } -int qeth_set_access_ctrl_online(struct qeth_card *card) +int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback) { int rc = 0; @@ -4179,12 +4208,13 @@ int qeth_set_access_ctrl_online(struct qeth_card *card) card->info.type == QETH_CARD_TYPE_OSX) && qeth_adp_supported(card, IPA_SETADP_SET_ACCESS_CONTROL)) { rc = qeth_setadpparms_set_access_ctrl(card, - card->options.isolation); + card->options.isolation, fallback); if (rc) { QETH_DBF_MESSAGE(3, "IPA(SET_ACCESS_CTRL,%s,%d) sent failed\n", card->gdev->dev.kobj.name, rc); + rc = -EOPNOTSUPP; } } else if (card->options.isolation != ISOLATION_MODE_NONE) { card->options.isolation = ISOLATION_MODE_NONE; @@ -5552,6 +5582,8 @@ static int __init qeth_core_init(void) rwlock_init(&qeth_core_card_list.rwlock); mutex_init(&qeth_mod_mutex); + qeth_wq = create_singlethread_workqueue("qeth_wq"); + rc = qeth_register_dbf_views(); if (rc) goto out_err; @@ -5598,6 +5630,7 @@ out_err: static void __exit qeth_core_exit(void) { + destroy_workqueue(qeth_wq); ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); ccw_driver_unregister(&qeth_ccw_driver); kmem_cache_destroy(qeth_qdio_outbuf_cache); diff --git a/drivers/s390/net/qeth_core_mpc.c b/drivers/s390/net/qeth_core_mpc.c index 5cebfdd..06c5578 100644 --- a/drivers/s390/net/qeth_core_mpc.c +++ b/drivers/s390/net/qeth_core_mpc.c @@ -204,6 +204,7 @@ static struct ipa_rc_msg qeth_ipa_rc_msg[] = { {IPA_RC_INVALID_SETRTG_INDICATOR, "Invalid SETRTG indicator"}, {IPA_RC_MC_ADDR_ALREADY_DEFINED, "Multicast address already defined"}, {IPA_RC_LAN_OFFLINE, "STRTLAN_LAN_DISABLED - LAN offline"}, + {IPA_RC_VEPA_TO_VEB_TRANSITION, "Adj. switch disabled port mode RR"}, {IPA_RC_INVALID_IP_VERSION2, "Invalid IP version"}, {IPA_RC_ENOMEM, "Memory problem"}, {IPA_RC_FFFF, "Unknown Error"} diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h index 3690bbf..07085d5 100644 --- a/drivers/s390/net/qeth_core_mpc.h +++ b/drivers/s390/net/qeth_core_mpc.h @@ -177,6 +177,7 @@ enum qeth_ipa_return_codes { IPA_RC_INVALID_SETRTG_INDICATOR = 0xe012, IPA_RC_MC_ADDR_ALREADY_DEFINED = 0xe013, IPA_RC_LAN_OFFLINE = 0xe080, + IPA_RC_VEPA_TO_VEB_TRANSITION = 0xe090, IPA_RC_INVALID_IP_VERSION2 = 0xf001, IPA_RC_ENOMEM = 0xfffe, IPA_RC_FFFF = 0xffff @@ -269,6 +270,9 @@ enum qeth_ipa_set_access_mode_rc { SET_ACCESS_CTRL_RC_ALREADY_ISOLATED = 0x0010, SET_ACCESS_CTRL_RC_NONE_SHARED_ADAPTER = 0x0014, SET_ACCESS_CTRL_RC_ACTIVE_CHECKSUM_OFF = 0x0018, + SET_ACCESS_CTRL_RC_REFLREL_UNSUPPORTED = 0x0022, + SET_ACCESS_CTRL_RC_REFLREL_FAILED = 0x0024, + SET_ACCESS_CTRL_RC_REFLREL_DEACT_FAILED = 0x0028, }; @@ -386,6 +390,7 @@ struct qeth_snmp_ureq { /* SET_ACCESS_CONTROL: same format for request and reply */ struct qeth_set_access_ctrl { __u32 subcmd_code; + __u8 reserved[8]; } __attribute__((packed)); struct qeth_query_oat { diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 9655dc0..425c0ec 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -513,10 +513,11 @@ static ssize_t qeth_dev_isolation_store(struct device *dev, rc = count; /* defer IP assist if device is offline (until discipline->set_online)*/ + card->options.prev_isolation = card->options.isolation; card->options.isolation = isolation; if (card->state == CARD_STATE_SOFTSETUP || card->state == CARD_STATE_UP) { - int ipa_rc = qeth_set_access_ctrl_online(card); + int ipa_rc = qeth_set_access_ctrl_online(card, 1); if (ipa_rc != 0) rc = ipa_rc; } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 7319555..d690166 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1025,9 +1025,14 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) contin: if ((card->info.type == QETH_CARD_TYPE_OSD) || - (card->info.type == QETH_CARD_TYPE_OSX)) + (card->info.type == QETH_CARD_TYPE_OSX)) { /* configure isolation level */ - qeth_set_access_ctrl_online(card); + rc = qeth_set_access_ctrl_online(card, 0); + if (rc) { + rc = -ENODEV; + goto out_remove; + } + } if (card->info.type != QETH_CARD_TYPE_OSN && card->info.type != QETH_CARD_TYPE_OSM) @@ -1144,12 +1149,9 @@ static int qeth_l2_recover(void *ptr) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); else { - if (rtnl_trylock()) { - dev_close(card->dev); - rtnl_unlock(); - dev_warn(&card->gdev->dev, "The qeth device driver " + qeth_close_dev(card); + dev_warn(&card->gdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); - } } qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 0749efe..091ca0efa 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1449,7 +1449,8 @@ static int qeth_l3_start_ipassists(struct qeth_card *card) { QETH_CARD_TEXT(card, 3, "strtipas"); - qeth_set_access_ctrl_online(card); /* go on*/ + if (qeth_set_access_ctrl_online(card, 0)) + return -EIO; qeth_l3_start_ipa_arp_processing(card); /* go on*/ qeth_l3_start_ipa_ip_fragmentation(card); /* go on*/ qeth_l3_start_ipa_source_mac(card); /* go on*/ @@ -3388,8 +3389,10 @@ contin: QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); if (!card->options.sniffer) { rc = qeth_l3_start_ipassists(card); - if (rc) + if (rc) { QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc); + goto out_remove; + } rc = qeth_l3_setrouting_v4(card); if (rc) QETH_DBF_TEXT_(SETUP, 2, "4err%d", rc); @@ -3511,12 +3514,9 @@ static int qeth_l3_recover(void *ptr) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); else { - if (rtnl_trylock()) { - dev_close(card->dev); - rtnl_unlock(); - dev_warn(&card->gdev->dev, "The qeth device driver " + qeth_close_dev(card); + dev_warn(&card->gdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); - } } qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); -- cgit v0.10.2 From 26e4b3340e5ac423497ee1a59d42b4ef81af4272 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 21 Jan 2013 02:30:21 +0000 Subject: qeth: Update Kconfig wording Refer to virtual NICs instead of GuestLANs. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index dfda748..8b3f559 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -74,8 +74,8 @@ config QETH depends on CCW && NETDEVICES && IP_MULTICAST && QDIO help This driver supports the IBM System z OSA Express adapters - in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN - interfaces in QDIO and HIPER mode. + in QDIO mode (all media types), HiperSockets interfaces and z/VM + virtual NICs for Guest LAN and VSWITCH. For details please refer to the documentation provided by IBM at -- cgit v0.10.2 From 819dc537fd7fcd799c5f7f85693d29e2635a84f9 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 21 Jan 2013 02:30:22 +0000 Subject: qeth: Make s390dbf card entries persistent As of now, s390dbf entries for the cards are discarded as soon as the device is removed. However, this will also bar us of all chances of getting valuable debug information after a device has been removed. This patch will keep the s390dbf entries around until the qeth module is removed. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 1cccbad..3535b13 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5122,13 +5122,81 @@ static const struct device_type qeth_osn_devtype = { .groups = qeth_osn_attr_groups, }; +#define DBF_NAME_LEN 20 + +struct qeth_dbf_entry { + char dbf_name[DBF_NAME_LEN]; + debug_info_t *dbf_info; + struct list_head dbf_list; +}; + +static LIST_HEAD(qeth_dbf_list); +static DEFINE_MUTEX(qeth_dbf_list_mutex); + +static debug_info_t *qeth_get_dbf_entry(char *name) +{ + struct qeth_dbf_entry *entry; + debug_info_t *rc = NULL; + + mutex_lock(&qeth_dbf_list_mutex); + list_for_each_entry(entry, &qeth_dbf_list, dbf_list) { + if (strcmp(entry->dbf_name, name) == 0) { + rc = entry->dbf_info; + break; + } + } + mutex_unlock(&qeth_dbf_list_mutex); + return rc; +} + +static int qeth_add_dbf_entry(struct qeth_card *card, char *name) +{ + struct qeth_dbf_entry *new_entry; + + card->debug = debug_register(name, 2, 1, 8); + if (!card->debug) { + QETH_DBF_TEXT_(SETUP, 2, "%s", "qcdbf"); + goto err; + } + if (debug_register_view(card->debug, &debug_hex_ascii_view)) + goto err_dbg; + new_entry = kzalloc(sizeof(struct qeth_dbf_entry), GFP_KERNEL); + if (!new_entry) + goto err_dbg; + strncpy(new_entry->dbf_name, name, DBF_NAME_LEN); + new_entry->dbf_info = card->debug; + mutex_lock(&qeth_dbf_list_mutex); + list_add(&new_entry->dbf_list, &qeth_dbf_list); + mutex_unlock(&qeth_dbf_list_mutex); + + return 0; + +err_dbg: + debug_unregister(card->debug); +err: + return -ENOMEM; +} + +static void qeth_clear_dbf_list(void) +{ + struct qeth_dbf_entry *entry, *tmp; + + mutex_lock(&qeth_dbf_list_mutex); + list_for_each_entry_safe(entry, tmp, &qeth_dbf_list, dbf_list) { + list_del(&entry->dbf_list); + debug_unregister(entry->dbf_info); + kfree(entry); + } + mutex_unlock(&qeth_dbf_list_mutex); +} + static int qeth_core_probe_device(struct ccwgroup_device *gdev) { struct qeth_card *card; struct device *dev; int rc; unsigned long flags; - char dbf_name[20]; + char dbf_name[DBF_NAME_LEN]; QETH_DBF_TEXT(SETUP, 2, "probedev"); @@ -5147,13 +5215,12 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev) snprintf(dbf_name, sizeof(dbf_name), "qeth_card_%s", dev_name(&gdev->dev)); - card->debug = debug_register(dbf_name, 2, 1, 8); + card->debug = qeth_get_dbf_entry(dbf_name); if (!card->debug) { - QETH_DBF_TEXT_(SETUP, 2, "%s", "qcdbf"); - rc = -ENOMEM; - goto err_card; + rc = qeth_add_dbf_entry(card, dbf_name); + if (rc) + goto err_card; } - debug_register_view(card->debug, &debug_hex_ascii_view); card->read.ccwdev = gdev->cdev[0]; card->write.ccwdev = gdev->cdev[1]; @@ -5167,12 +5234,12 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev) rc = qeth_determine_card_type(card); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc); - goto err_dbf; + goto err_card; } rc = qeth_setup_card(card); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); - goto err_dbf; + goto err_card; } if (card->info.type == QETH_CARD_TYPE_OSN) @@ -5185,7 +5252,7 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev) case QETH_CARD_TYPE_OSM: rc = qeth_core_load_discipline(card, QETH_DISCIPLINE_LAYER2); if (rc) - goto err_dbf; + goto err_card; rc = card->discipline->setup(card->gdev); if (rc) goto err_disc; @@ -5204,8 +5271,6 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev) err_disc: qeth_core_free_discipline(card); -err_dbf: - debug_unregister(card->debug); err_card: qeth_core_free_card(card); err_dev: @@ -5225,7 +5290,6 @@ static void qeth_core_remove_device(struct ccwgroup_device *gdev) qeth_core_free_discipline(card); } - debug_unregister(card->debug); write_lock_irqsave(&qeth_core_card_list.rwlock, flags); list_del(&card->list); write_unlock_irqrestore(&qeth_core_card_list.rwlock, flags); @@ -5579,6 +5643,7 @@ static int __init qeth_core_init(void) pr_info("loading core functions\n"); INIT_LIST_HEAD(&qeth_core_card_list.list); + INIT_LIST_HEAD(&qeth_dbf_list); rwlock_init(&qeth_core_card_list.rwlock); mutex_init(&qeth_mod_mutex); @@ -5630,6 +5695,7 @@ out_err: static void __exit qeth_core_exit(void) { + qeth_clear_dbf_list(); destroy_workqueue(qeth_wq); ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); ccw_driver_unregister(&qeth_ccw_driver); -- cgit v0.10.2 From 0fa81cd49da84965ee01288b429a69a2ffd0bc5d Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 21 Jan 2013 02:30:23 +0000 Subject: qeth: Fix HiperSockets performance regression Commit 46d3ceab "tcp: TCP Small Queues" has severly degraded performance for single connection RR workloads on HiperSockets with MTU >=16K due to a conflict of the TCP Small Queues approach with our buffer scan threshold which releases buffers not frequently enough yet. This fix restores performance to the same level as before cited commit. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3535b13..0d8cdff 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4700,7 +4700,7 @@ static int qeth_qdio_establish(struct qeth_card *card) init_data.output_sbal_addr_array = (void **) out_sbal_ptrs; init_data.output_sbal_state_array = card->qdio.out_bufstates; init_data.scan_threshold = - (card->info.type == QETH_CARD_TYPE_IQD) ? 8 : 32; + (card->info.type == QETH_CARD_TYPE_IQD) ? 1 : 32; if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ALLOCATED, QETH_QDIO_ESTABLISHED) == QETH_QDIO_ALLOCATED) { -- cgit v0.10.2 From 202dc3fc599c1dded235d3b448d9ca924252e354 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 21 Jan 2013 06:17:41 +0000 Subject: Documentation: remove obsolete networking/multicast.txt file The original intent of this file was to list limitations in drivers/hardware relating to multicast use, back when some modest hardware from the early 1990s did not support things we might take for granted today. I was intending to delete some now-gone MCA/token ring entries in this file, but once I opened it, I found it only contained information on the earliest (pre-2000) linux networking drivers. Checking the git history shows that the file hasn't been touched since 2005. Clearly nobody is actively consulting this file as a meaningful reference. Rather than add a "YES YES YES" line for all of the drivers we currently have, lets just take advantage of the fact that nobody is using the file to delete it. This has the side benefit of not having to do a line-by-line deletion of the file content as each older driver is expired. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 2cc3c77..1abfff2 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -126,8 +126,6 @@ ltpc.txt - the Apple or Farallon LocalTalk PC card driver mac80211-injection.txt - HOWTO use packet injection with mac80211 -multicast.txt - - Behaviour of cards under Multicast multiqueue.txt - HOWTO for multiqueue network device support. netconsole.txt diff --git a/Documentation/networking/multicast.txt b/Documentation/networking/multicast.txt deleted file mode 100644 index b06c8c6..0000000 --- a/Documentation/networking/multicast.txt +++ /dev/null @@ -1,63 +0,0 @@ -Behaviour of Cards Under Multicast -================================== - -This is how they currently behave, not what the hardware can do--for example, -the Lance driver doesn't use its filter, even though the code for loading -it is in the DEC Lance-based driver. - -The following are requirements for multicasting ------------------------------------------------ -AppleTalk Multicast hardware filtering not important but - avoid cards only doing promisc -IP-Multicast Multicast hardware filters really help -IP-MRoute AllMulti hardware filters are of no help - - -Board Multicast AllMulti Promisc Filter ------------------------------------------------------------------------- -3c501 YES YES YES Software -3c503 YES YES YES Hardware -3c505 YES NO YES Hardware -3c507 NO NO NO N/A -3c509 YES YES YES Software -3c59x YES YES YES Software -ac3200 YES YES YES Hardware -apricot YES PROMISC YES Hardware -arcnet NO NO NO N/A -at1700 PROMISC PROMISC YES Software -atp PROMISC PROMISC YES Software -cs89x0 YES YES YES Software -de4x5 YES YES YES Hardware -de600 NO NO NO N/A -de620 PROMISC PROMISC YES Software -depca YES PROMISC YES Hardware -dmfe YES YES YES Software(*) -e2100 YES YES YES Hardware -eepro YES PROMISC YES Hardware -eexpress NO NO NO N/A -ewrk3 YES PROMISC YES Hardware -hp-plus YES YES YES Hardware -hp YES YES YES Hardware -hp100 YES YES YES Hardware -ibmtr NO NO NO N/A -ioc3-eth YES YES YES Hardware -lance YES YES YES Software(#) -ne YES YES YES Hardware -ni52 <------------------ Buggy ------------------> -ni65 YES YES YES Software(#) -seeq NO NO NO N/A -sgiseek <------------------ Buggy ------------------> -smc-ultra YES YES YES Hardware -sunlance YES YES YES Hardware -tulip YES YES YES Hardware -wavelan YES PROMISC YES Hardware -wd YES YES YES Hardware -xirc2ps_cs YES YES YES Hardware -znet YES YES YES Software - - -PROMISC = This multicast mode is in fact promiscuous mode. Avoid using -cards who go PROMISC on any multicast in a multicast kernel. - -(#) = Hardware multicast support is not used yet. -(*) = Hardware support for Davicom 9132 chipset only. -- cgit v0.10.2 From bbb923a4c2d17ebd5ec34755fe19a33914cbd86f Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 21 Jan 2013 06:00:25 +0000 Subject: mcast: define and use MRT[6]_MAX in ip[6]_mroute_opt() This will ease further addition of new MRT[6]_* values and avoid to update in6.h each time. Note that we reduce the maximum value from 210 to 209, but 210 does not match any known value in ip[6]_mroute_setsockopt(). Signed-off-by: Nicolas Dichtel Acked-by: David L Stevens Signed-off-by: David S. Miller diff --git a/include/linux/mroute.h b/include/linux/mroute.h index ea00d91..79aaa9f 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -9,7 +9,7 @@ #ifdef CONFIG_IP_MROUTE static inline int ip_mroute_opt(int opt) { - return (opt >= MRT_BASE) && (opt <= MRT_BASE + 10); + return (opt >= MRT_BASE) && (opt <= MRT_MAX); } #else static inline int ip_mroute_opt(int opt) diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index a223561..66982e7 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -10,7 +10,7 @@ #ifdef CONFIG_IPV6_MROUTE static inline int ip6_mroute_opt(int opt) { - return (opt >= MRT6_BASE) && (opt <= MRT6_BASE + 10); + return (opt >= MRT6_BASE) && (opt <= MRT6_MAX); } #else static inline int ip6_mroute_opt(int opt) diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 5673b97..53b1d56 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -259,17 +259,10 @@ struct in6_flowlabel_req { /* * Multicast Routing: - * see include/linux/mroute6.h. + * see include/uapi/linux/mroute6.h. * - * MRT6_INIT 200 - * MRT6_DONE 201 - * MRT6_ADD_MIF 202 - * MRT6_DEL_MIF 203 - * MRT6_ADD_MFC 204 - * MRT6_DEL_MFC 205 - * MRT6_VERSION 206 - * MRT6_ASSERT 207 - * MRT6_PIM 208 - * (reserved) 209 + * MRT6_BASE 200 + * ... + * MRT6_MAX */ #endif /* _UAPI_LINUX_IN6_H */ diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h index 1692999..1c11004 100644 --- a/include/uapi/linux/mroute.h +++ b/include/uapi/linux/mroute.h @@ -26,6 +26,7 @@ #define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ #define MRT_PIM (MRT_BASE+8) /* enable PIM code */ #define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ +#define MRT_MAX (MRT_BASE+9) #define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h index 3e89b5e..c206ae3 100644 --- a/include/uapi/linux/mroute6.h +++ b/include/uapi/linux/mroute6.h @@ -26,6 +26,7 @@ #define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ #define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ #define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ +#define MRT6_MAX (MRT6_BASE+9) #define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) -- cgit v0.10.2 From 660b26dc1a8aeb33c2a2246ebf1b3684449a74b7 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 21 Jan 2013 06:00:26 +0000 Subject: mcast: add multicast proxy support (IPv4 and IPv6) This patch add the support of proxy multicast, ie being able to build a static multicast tree. It adds the support of (*,*) and (*,G) entries. The user should define an (*,*) entry which is not used for real forwarding. This entry defines the upstream in iif and contains all interfaces from the static tree in its oifs. It will be used to forward packet upstream when they come from an interface belonging to the static tree. Hence, the user should define (*,G) entries to build its static tree. Note that upstream interface must be part of oifs: packets are sent to all oifs interfaces except the input interface. This ensures to always join the whole static tree, even if the packet is not coming from the upstream interface. Signed-off-by: Nicolas Dichtel Acked-by: David L Stevens Signed-off-by: David S. Miller diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h index 1c11004..a382d2c 100644 --- a/include/uapi/linux/mroute.h +++ b/include/uapi/linux/mroute.h @@ -26,7 +26,9 @@ #define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ #define MRT_PIM (MRT_BASE+8) /* enable PIM code */ #define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ -#define MRT_MAX (MRT_BASE+9) +#define MRT_ADD_MFC_PROXY (MRT_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT_DEL_MFC_PROXY (MRT_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT_MAX (MRT_BASE+11) #define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h index c206ae3..ce91215 100644 --- a/include/uapi/linux/mroute6.h +++ b/include/uapi/linux/mroute6.h @@ -26,7 +26,9 @@ #define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ #define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ #define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ -#define MRT6_MAX (MRT6_BASE+9) +#define MRT6_ADD_MFC_PROXY (MRT6_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT6_DEL_MFC_PROXY (MRT6_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT6_MAX (MRT6_BASE+11) #define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index a9454cb..4b5e226 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -828,6 +828,49 @@ static struct mfc_cache *ipmr_cache_find(struct mr_table *mrt, return NULL; } +/* Look for a (*,*,oif) entry */ +static struct mfc_cache *ipmr_cache_find_any_parent(struct mr_table *mrt, + int vifi) +{ + int line = MFC_HASH(INADDR_ANY, INADDR_ANY); + struct mfc_cache *c; + + list_for_each_entry_rcu(c, &mrt->mfc_cache_array[line], list) + if (c->mfc_origin == INADDR_ANY && + c->mfc_mcastgrp == INADDR_ANY && + c->mfc_un.res.ttls[vifi] < 255) + return c; + + return NULL; +} + +/* Look for a (*,G) entry */ +static struct mfc_cache *ipmr_cache_find_any(struct mr_table *mrt, + __be32 mcastgrp, int vifi) +{ + int line = MFC_HASH(mcastgrp, INADDR_ANY); + struct mfc_cache *c, *proxy; + + if (mcastgrp == INADDR_ANY) + goto skip; + + list_for_each_entry_rcu(c, &mrt->mfc_cache_array[line], list) + if (c->mfc_origin == INADDR_ANY && + c->mfc_mcastgrp == mcastgrp) { + if (c->mfc_un.res.ttls[vifi] < 255) + return c; + + /* It's ok if the vifi is part of the static tree */ + proxy = ipmr_cache_find_any_parent(mrt, + c->mfc_parent); + if (proxy && proxy->mfc_un.res.ttls[vifi] < 255) + return c; + } + +skip: + return ipmr_cache_find_any_parent(mrt, vifi); +} + /* * Allocate a multicast cache entry */ @@ -1053,7 +1096,7 @@ ipmr_cache_unresolved(struct mr_table *mrt, vifi_t vifi, struct sk_buff *skb) * MFC cache manipulation by user space mroute daemon */ -static int ipmr_mfc_delete(struct mr_table *mrt, struct mfcctl *mfc) +static int ipmr_mfc_delete(struct mr_table *mrt, struct mfcctl *mfc, int parent) { int line; struct mfc_cache *c, *next; @@ -1062,7 +1105,8 @@ static int ipmr_mfc_delete(struct mr_table *mrt, struct mfcctl *mfc) list_for_each_entry_safe(c, next, &mrt->mfc_cache_array[line], list) { if (c->mfc_origin == mfc->mfcc_origin.s_addr && - c->mfc_mcastgrp == mfc->mfcc_mcastgrp.s_addr) { + c->mfc_mcastgrp == mfc->mfcc_mcastgrp.s_addr && + (parent == -1 || parent == c->mfc_parent)) { list_del_rcu(&c->list); mroute_netlink_event(mrt, c, RTM_DELROUTE); ipmr_cache_free(c); @@ -1073,7 +1117,7 @@ static int ipmr_mfc_delete(struct mr_table *mrt, struct mfcctl *mfc) } static int ipmr_mfc_add(struct net *net, struct mr_table *mrt, - struct mfcctl *mfc, int mrtsock) + struct mfcctl *mfc, int mrtsock, int parent) { bool found = false; int line; @@ -1086,7 +1130,8 @@ static int ipmr_mfc_add(struct net *net, struct mr_table *mrt, list_for_each_entry(c, &mrt->mfc_cache_array[line], list) { if (c->mfc_origin == mfc->mfcc_origin.s_addr && - c->mfc_mcastgrp == mfc->mfcc_mcastgrp.s_addr) { + c->mfc_mcastgrp == mfc->mfcc_mcastgrp.s_addr && + (parent == -1 || parent == c->mfc_parent)) { found = true; break; } @@ -1103,7 +1148,8 @@ static int ipmr_mfc_add(struct net *net, struct mr_table *mrt, return 0; } - if (!ipv4_is_multicast(mfc->mfcc_mcastgrp.s_addr)) + if (mfc->mfcc_mcastgrp.s_addr != INADDR_ANY && + !ipv4_is_multicast(mfc->mfcc_mcastgrp.s_addr)) return -EINVAL; c = ipmr_cache_alloc(); @@ -1218,7 +1264,7 @@ static void mrtsock_destruct(struct sock *sk) int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen) { - int ret; + int ret, parent = 0; struct vifctl vif; struct mfcctl mfc; struct net *net = sock_net(sk); @@ -1287,16 +1333,22 @@ int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsi */ case MRT_ADD_MFC: case MRT_DEL_MFC: + parent = -1; + case MRT_ADD_MFC_PROXY: + case MRT_DEL_MFC_PROXY: if (optlen != sizeof(mfc)) return -EINVAL; if (copy_from_user(&mfc, optval, sizeof(mfc))) return -EFAULT; + if (parent == 0) + parent = mfc.mfcc_parent; rtnl_lock(); - if (optname == MRT_DEL_MFC) - ret = ipmr_mfc_delete(mrt, &mfc); + if (optname == MRT_DEL_MFC || optname == MRT_DEL_MFC_PROXY) + ret = ipmr_mfc_delete(mrt, &mfc, parent); else ret = ipmr_mfc_add(net, mrt, &mfc, - sk == rtnl_dereference(mrt->mroute_sk)); + sk == rtnl_dereference(mrt->mroute_sk), + parent); rtnl_unlock(); return ret; /* @@ -1749,17 +1801,28 @@ static int ip_mr_forward(struct net *net, struct mr_table *mrt, { int psend = -1; int vif, ct; + int true_vifi = ipmr_find_vif(mrt, skb->dev); vif = cache->mfc_parent; cache->mfc_un.res.pkt++; cache->mfc_un.res.bytes += skb->len; + if (cache->mfc_origin == INADDR_ANY && true_vifi >= 0) { + struct mfc_cache *cache_proxy; + + /* For an (*,G) entry, we only check that the incomming + * interface is part of the static tree. + */ + cache_proxy = ipmr_cache_find_any_parent(mrt, vif); + if (cache_proxy && + cache_proxy->mfc_un.res.ttls[true_vifi] < 255) + goto forward; + } + /* * Wrong interface: drop packet and (maybe) send PIM assert. */ if (mrt->vif_table[vif].dev != skb->dev) { - int true_vifi; - if (rt_is_output_route(skb_rtable(skb))) { /* It is our own packet, looped back. * Very complicated situation... @@ -1776,7 +1839,6 @@ static int ip_mr_forward(struct net *net, struct mr_table *mrt, } cache->mfc_un.res.wrong_if++; - true_vifi = ipmr_find_vif(mrt, skb->dev); if (true_vifi >= 0 && mrt->mroute_do_assert && /* pimsm uses asserts, when switching from RPT to SPT, @@ -1794,15 +1856,33 @@ static int ip_mr_forward(struct net *net, struct mr_table *mrt, goto dont_forward; } +forward: mrt->vif_table[vif].pkt_in++; mrt->vif_table[vif].bytes_in += skb->len; /* * Forward the frame */ + if (cache->mfc_origin == INADDR_ANY && + cache->mfc_mcastgrp == INADDR_ANY) { + if (true_vifi >= 0 && + true_vifi != cache->mfc_parent && + ip_hdr(skb)->ttl > + cache->mfc_un.res.ttls[cache->mfc_parent]) { + /* It's an (*,*) entry and the packet is not coming from + * the upstream: forward the packet to the upstream + * only. + */ + psend = cache->mfc_parent; + goto last_forward; + } + goto dont_forward; + } for (ct = cache->mfc_un.res.maxvif - 1; ct >= cache->mfc_un.res.minvif; ct--) { - if (ip_hdr(skb)->ttl > cache->mfc_un.res.ttls[ct]) { + /* For (*,G) entry, don't forward to the incoming interface */ + if ((cache->mfc_origin != INADDR_ANY || ct != true_vifi) && + ip_hdr(skb)->ttl > cache->mfc_un.res.ttls[ct]) { if (psend != -1) { struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); @@ -1813,6 +1893,7 @@ static int ip_mr_forward(struct net *net, struct mr_table *mrt, psend = ct; } } +last_forward: if (psend != -1) { if (local) { struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); @@ -1902,6 +1983,13 @@ int ip_mr_input(struct sk_buff *skb) /* already under rcu_read_lock() */ cache = ipmr_cache_find(mrt, ip_hdr(skb)->saddr, ip_hdr(skb)->daddr); + if (cache == NULL) { + int vif = ipmr_find_vif(mrt, skb->dev); + + if (vif >= 0) + cache = ipmr_cache_find_any(mrt, ip_hdr(skb)->daddr, + vif); + } /* * No usable cache entry @@ -2107,7 +2195,12 @@ int ipmr_get_route(struct net *net, struct sk_buff *skb, rcu_read_lock(); cache = ipmr_cache_find(mrt, saddr, daddr); + if (cache == NULL && skb->dev) { + int vif = ipmr_find_vif(mrt, skb->dev); + if (vif >= 0) + cache = ipmr_cache_find_any(mrt, daddr, vif); + } if (cache == NULL) { struct sk_buff *skb2; struct iphdr *iph; diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 26dcdec..acc3249 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1017,6 +1017,50 @@ static struct mfc6_cache *ip6mr_cache_find(struct mr6_table *mrt, return NULL; } +/* Look for a (*,*,oif) entry */ +static struct mfc6_cache *ip6mr_cache_find_any_parent(struct mr6_table *mrt, + mifi_t mifi) +{ + int line = MFC6_HASH(&in6addr_any, &in6addr_any); + struct mfc6_cache *c; + + list_for_each_entry(c, &mrt->mfc6_cache_array[line], list) + if (ipv6_addr_any(&c->mf6c_origin) && + ipv6_addr_any(&c->mf6c_mcastgrp) && + (c->mfc_un.res.ttls[mifi] < 255)) + return c; + + return NULL; +} + +/* Look for a (*,G) entry */ +static struct mfc6_cache *ip6mr_cache_find_any(struct mr6_table *mrt, + struct in6_addr *mcastgrp, + mifi_t mifi) +{ + int line = MFC6_HASH(mcastgrp, &in6addr_any); + struct mfc6_cache *c, *proxy; + + if (ipv6_addr_any(mcastgrp)) + goto skip; + + list_for_each_entry(c, &mrt->mfc6_cache_array[line], list) + if (ipv6_addr_any(&c->mf6c_origin) && + ipv6_addr_equal(&c->mf6c_mcastgrp, mcastgrp)) { + if (c->mfc_un.res.ttls[mifi] < 255) + return c; + + /* It's ok if the mifi is part of the static tree */ + proxy = ip6mr_cache_find_any_parent(mrt, + c->mf6c_parent); + if (proxy && proxy->mfc_un.res.ttls[mifi] < 255) + return c; + } + +skip: + return ip6mr_cache_find_any_parent(mrt, mifi); +} + /* * Allocate a multicast cache entry */ @@ -1247,7 +1291,8 @@ ip6mr_cache_unresolved(struct mr6_table *mrt, mifi_t mifi, struct sk_buff *skb) * MFC6 cache manipulation by user space */ -static int ip6mr_mfc_delete(struct mr6_table *mrt, struct mf6cctl *mfc) +static int ip6mr_mfc_delete(struct mr6_table *mrt, struct mf6cctl *mfc, + int parent) { int line; struct mfc6_cache *c, *next; @@ -1256,7 +1301,9 @@ static int ip6mr_mfc_delete(struct mr6_table *mrt, struct mf6cctl *mfc) list_for_each_entry_safe(c, next, &mrt->mfc6_cache_array[line], list) { if (ipv6_addr_equal(&c->mf6c_origin, &mfc->mf6cc_origin.sin6_addr) && - ipv6_addr_equal(&c->mf6c_mcastgrp, &mfc->mf6cc_mcastgrp.sin6_addr)) { + ipv6_addr_equal(&c->mf6c_mcastgrp, + &mfc->mf6cc_mcastgrp.sin6_addr) && + (parent == -1 || parent == c->mf6c_parent)) { write_lock_bh(&mrt_lock); list_del(&c->list); write_unlock_bh(&mrt_lock); @@ -1391,7 +1438,7 @@ void ip6_mr_cleanup(void) } static int ip6mr_mfc_add(struct net *net, struct mr6_table *mrt, - struct mf6cctl *mfc, int mrtsock) + struct mf6cctl *mfc, int mrtsock, int parent) { bool found = false; int line; @@ -1413,7 +1460,9 @@ static int ip6mr_mfc_add(struct net *net, struct mr6_table *mrt, list_for_each_entry(c, &mrt->mfc6_cache_array[line], list) { if (ipv6_addr_equal(&c->mf6c_origin, &mfc->mf6cc_origin.sin6_addr) && - ipv6_addr_equal(&c->mf6c_mcastgrp, &mfc->mf6cc_mcastgrp.sin6_addr)) { + ipv6_addr_equal(&c->mf6c_mcastgrp, + &mfc->mf6cc_mcastgrp.sin6_addr) && + (parent == -1 || parent == mfc->mf6cc_parent)) { found = true; break; } @@ -1430,7 +1479,8 @@ static int ip6mr_mfc_add(struct net *net, struct mr6_table *mrt, return 0; } - if (!ipv6_addr_is_multicast(&mfc->mf6cc_mcastgrp.sin6_addr)) + if (!ipv6_addr_any(&mfc->mf6cc_mcastgrp.sin6_addr) && + !ipv6_addr_is_multicast(&mfc->mf6cc_mcastgrp.sin6_addr)) return -EINVAL; c = ip6mr_cache_alloc(); @@ -1596,7 +1646,7 @@ struct sock *mroute6_socket(struct net *net, struct sk_buff *skb) int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen) { - int ret; + int ret, parent = 0; struct mif6ctl vif; struct mf6cctl mfc; mifi_t mifi; @@ -1653,15 +1703,21 @@ int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, uns */ case MRT6_ADD_MFC: case MRT6_DEL_MFC: + parent = -1; + case MRT6_ADD_MFC_PROXY: + case MRT6_DEL_MFC_PROXY: if (optlen < sizeof(mfc)) return -EINVAL; if (copy_from_user(&mfc, optval, sizeof(mfc))) return -EFAULT; + if (parent == 0) + parent = mfc.mf6cc_parent; rtnl_lock(); - if (optname == MRT6_DEL_MFC) - ret = ip6mr_mfc_delete(mrt, &mfc); + if (optname == MRT6_DEL_MFC || optname == MRT6_DEL_MFC_PROXY) + ret = ip6mr_mfc_delete(mrt, &mfc, parent); else - ret = ip6mr_mfc_add(net, mrt, &mfc, sk == mrt->mroute6_sk); + ret = ip6mr_mfc_add(net, mrt, &mfc, + sk == mrt->mroute6_sk, parent); rtnl_unlock(); return ret; @@ -2015,19 +2071,29 @@ static int ip6_mr_forward(struct net *net, struct mr6_table *mrt, { int psend = -1; int vif, ct; + int true_vifi = ip6mr_find_vif(mrt, skb->dev); vif = cache->mf6c_parent; cache->mfc_un.res.pkt++; cache->mfc_un.res.bytes += skb->len; + if (ipv6_addr_any(&cache->mf6c_origin) && true_vifi >= 0) { + struct mfc6_cache *cache_proxy; + + /* For an (*,G) entry, we only check that the incomming + * interface is part of the static tree. + */ + cache_proxy = ip6mr_cache_find_any_parent(mrt, vif); + if (cache_proxy && + cache_proxy->mfc_un.res.ttls[true_vifi] < 255) + goto forward; + } + /* * Wrong interface: drop packet and (maybe) send PIM assert. */ if (mrt->vif6_table[vif].dev != skb->dev) { - int true_vifi; - cache->mfc_un.res.wrong_if++; - true_vifi = ip6mr_find_vif(mrt, skb->dev); if (true_vifi >= 0 && mrt->mroute_do_assert && /* pimsm uses asserts, when switching from RPT to SPT, @@ -2045,14 +2111,32 @@ static int ip6_mr_forward(struct net *net, struct mr6_table *mrt, goto dont_forward; } +forward: mrt->vif6_table[vif].pkt_in++; mrt->vif6_table[vif].bytes_in += skb->len; /* * Forward the frame */ + if (ipv6_addr_any(&cache->mf6c_origin) && + ipv6_addr_any(&cache->mf6c_mcastgrp)) { + if (true_vifi >= 0 && + true_vifi != cache->mf6c_parent && + ipv6_hdr(skb)->hop_limit > + cache->mfc_un.res.ttls[cache->mf6c_parent]) { + /* It's an (*,*) entry and the packet is not coming from + * the upstream: forward the packet to the upstream + * only. + */ + psend = cache->mf6c_parent; + goto last_forward; + } + goto dont_forward; + } for (ct = cache->mfc_un.res.maxvif - 1; ct >= cache->mfc_un.res.minvif; ct--) { - if (ipv6_hdr(skb)->hop_limit > cache->mfc_un.res.ttls[ct]) { + /* For (*,G) entry, don't forward to the incoming interface */ + if ((!ipv6_addr_any(&cache->mf6c_origin) || ct != true_vifi) && + ipv6_hdr(skb)->hop_limit > cache->mfc_un.res.ttls[ct]) { if (psend != -1) { struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); if (skb2) @@ -2061,6 +2145,7 @@ static int ip6_mr_forward(struct net *net, struct mr6_table *mrt, psend = ct; } } +last_forward: if (psend != -1) { ip6mr_forward2(net, mrt, skb, cache, psend); return 0; @@ -2096,6 +2181,14 @@ int ip6_mr_input(struct sk_buff *skb) read_lock(&mrt_lock); cache = ip6mr_cache_find(mrt, &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr); + if (cache == NULL) { + int vif = ip6mr_find_vif(mrt, skb->dev); + + if (vif >= 0) + cache = ip6mr_cache_find_any(mrt, + &ipv6_hdr(skb)->daddr, + vif); + } /* * No usable cache entry @@ -2183,6 +2276,13 @@ int ip6mr_get_route(struct net *net, read_lock(&mrt_lock); cache = ip6mr_cache_find(mrt, &rt->rt6i_src.addr, &rt->rt6i_dst.addr); + if (!cache && skb->dev) { + int vif = ip6mr_find_vif(mrt, skb->dev); + + if (vif >= 0) + cache = ip6mr_cache_find_any(mrt, &rt->rt6i_dst.addr, + vif); + } if (!cache) { struct sk_buff *skb2; -- cgit v0.10.2 From 40cbfc37075a2ae2ed6c769cb0e9193819511f0a Mon Sep 17 00:00:00 2001 From: Amos Kong Date: Mon, 21 Jan 2013 01:17:21 +0000 Subject: move virtnet_send_command() above virtnet_set_mac_address() We want to send vq command to set mac address in virtnet_set_mac_address(), so do this function moving. Fixed a little issue of coding style. Signed-off-by: Amos Kong Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index a6fcf15..395ab4f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -753,6 +753,50 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +/* + * Send command via the control virtqueue and check status. Commands + * supported by the hypervisor, as indicated by feature bits, should + * never fail unless improperly formated. + */ +static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, + struct scatterlist *data, int out, int in) +{ + struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; + struct virtio_net_ctrl_hdr ctrl; + virtio_net_ctrl_ack status = ~0; + unsigned int tmp; + int i; + + /* Caller should know better */ + BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) || + (out + in > VIRTNET_SEND_COMMAND_SG_MAX)); + + out++; /* Add header */ + in++; /* Add return status */ + + ctrl.class = class; + ctrl.cmd = cmd; + + sg_init_table(sg, out + in); + + sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); + for_each_sg(data, s, out + in - 2, i) + sg_set_buf(&sg[i + 1], sg_virt(s), s->length); + sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); + + BUG_ON(virtqueue_add_buf(vi->cvq, sg, out, in, vi, GFP_ATOMIC) < 0); + + virtqueue_kick(vi->cvq); + + /* Spin for a response, the kick causes an ioport write, trapping + * into the hypervisor, so the request should be handled immediately. + */ + while (!virtqueue_get_buf(vi->cvq, &tmp)) + cpu_relax(); + + return status == VIRTIO_NET_OK; +} + static int virtnet_set_mac_address(struct net_device *dev, void *p) { struct virtnet_info *vi = netdev_priv(dev); @@ -819,51 +863,6 @@ static void virtnet_netpoll(struct net_device *dev) } #endif -/* - * Send command via the control virtqueue and check status. Commands - * supported by the hypervisor, as indicated by feature bits, should - * never fail unless improperly formated. - */ -static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, - struct scatterlist *data, int out, int in) -{ - struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; - struct virtio_net_ctrl_hdr ctrl; - virtio_net_ctrl_ack status = ~0; - unsigned int tmp; - int i; - - /* Caller should know better */ - BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) || - (out + in > VIRTNET_SEND_COMMAND_SG_MAX)); - - out++; /* Add header */ - in++; /* Add return status */ - - ctrl.class = class; - ctrl.cmd = cmd; - - sg_init_table(sg, out + in); - - sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); - for_each_sg(data, s, out + in - 2, i) - sg_set_buf(&sg[i + 1], sg_virt(s), s->length); - sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); - - BUG_ON(virtqueue_add_buf(vi->cvq, sg, out, in, vi, GFP_ATOMIC) < 0); - - virtqueue_kick(vi->cvq); - - /* - * Spin for a response, the kick causes an ioport write, trapping - * into the hypervisor, so the request should be handled immediately. - */ - while (!virtqueue_get_buf(vi->cvq, &tmp)) - cpu_relax(); - - return status == VIRTIO_NET_OK; -} - static void virtnet_ack_link_announce(struct virtnet_info *vi) { rtnl_lock(); -- cgit v0.10.2 From fa0879e37b59e8e3f130a30a9e6fa515717c5bdd Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Mon, 21 Jan 2013 01:17:22 +0000 Subject: net: split eth_mac_addr for better error handling When we set mac address, software mac address in system and hardware mac address all need to be updated. Current eth_mac_addr() doesn't allow callers to implement error handling nicely. This patch split eth_mac_addr() to prepare part and real commit part, then we can prepare first, and try to change hardware address, then do the real commit if hardware address is set successfully. Signed-off-by: Stefan Hajnoczi Signed-off-by: Amos Kong Signed-off-by: David S. Miller diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 1a43e1b..c623861 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -40,6 +40,8 @@ extern int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh, extern void eth_header_cache_update(struct hh_cache *hh, const struct net_device *dev, const unsigned char *haddr); +extern int eth_prepare_mac_addr_change(struct net_device *dev, void *p); +extern void eth_commit_mac_addr_change(struct net_device *dev, void *p); extern int eth_mac_addr(struct net_device *dev, void *p); extern int eth_change_mtu(struct net_device *dev, int new_mtu); extern int eth_validate_addr(struct net_device *dev); diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index bc39c8c..a36c85ea 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -272,6 +272,36 @@ void eth_header_cache_update(struct hh_cache *hh, EXPORT_SYMBOL(eth_header_cache_update); /** + * eth_prepare_mac_addr_change - prepare for mac change + * @dev: network device + * @p: socket address + */ +int eth_prepare_mac_addr_change(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + if (!(dev->priv_flags & IFF_LIVE_ADDR_CHANGE) && netif_running(dev)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + return 0; +} +EXPORT_SYMBOL(eth_prepare_mac_addr_change); + +/** + * eth_commit_mac_addr_change - commit mac change + * @dev: network device + * @p: socket address + */ +void eth_commit_mac_addr_change(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); +} +EXPORT_SYMBOL(eth_commit_mac_addr_change); + +/** * eth_mac_addr - set new Ethernet hardware address * @dev: network device * @p: socket address @@ -283,13 +313,12 @@ EXPORT_SYMBOL(eth_header_cache_update); */ int eth_mac_addr(struct net_device *dev, void *p) { - struct sockaddr *addr = p; + int ret; - if (!(dev->priv_flags & IFF_LIVE_ADDR_CHANGE) && netif_running(dev)) - return -EBUSY; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + ret = eth_prepare_mac_addr_change(dev, p); + if (ret < 0) + return ret; + eth_commit_mac_addr_change(dev, p); return 0; } EXPORT_SYMBOL(eth_mac_addr); -- cgit v0.10.2 From 7e58d5aea8abb993983a3f3088fd4a3f06180a1c Mon Sep 17 00:00:00 2001 From: Amos Kong Date: Mon, 21 Jan 2013 01:17:23 +0000 Subject: virtio-net: introduce a new control to set macaddr Currently we write MAC address to pci config space byte by byte, this means that we have an intermediate step where mac is wrong. This patch introduced a new control command to set MAC address, it's atomic. VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility. Signed-off-by: Amos Kong Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 395ab4f..701408a 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -802,14 +802,28 @@ static int virtnet_set_mac_address(struct net_device *dev, void *p) struct virtnet_info *vi = netdev_priv(dev); struct virtio_device *vdev = vi->vdev; int ret; + struct sockaddr *addr = p; + struct scatterlist sg; - ret = eth_mac_addr(dev, p); + ret = eth_prepare_mac_addr_change(dev, p); if (ret) return ret; - if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) + if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) { + sg_init_one(&sg, addr->sa_data, dev->addr_len); + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC, + VIRTIO_NET_CTRL_MAC_ADDR_SET, + &sg, 1, 0)) { + dev_warn(&vdev->dev, + "Failed to set mac address by vq command.\n"); + return -EINVAL; + } + } else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) { vdev->config->set(vdev, offsetof(struct virtio_net_config, mac), - dev->dev_addr, dev->addr_len); + addr->sa_data, dev->addr_len); + } + + eth_commit_mac_addr_change(dev, p); return 0; } @@ -1627,6 +1641,7 @@ static unsigned int features[] = { VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, + VIRTIO_NET_F_CTRL_MAC_ADDR, }; static struct virtio_driver virtio_net_driver = { diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 848e358..a5a8c88 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -53,6 +53,7 @@ * network */ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ @@ -127,7 +128,7 @@ typedef __u8 virtio_net_ctrl_ack; #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* - * Control the MAC filter table. + * Control the MAC * * The MAC filter table is managed by the hypervisor, the guest should * assume the size is infinite. Filtering should be considered @@ -140,6 +141,10 @@ typedef __u8 virtio_net_ctrl_ack; * first sg list contains unicast addresses, the second is for multicast. * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature * is available. + * + * The ADDR_SET command requests one out scatterlist, it contains a + * 6 bytes MAC address. This functionality is present if the + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. */ struct virtio_net_ctrl_mac { __u32 entries; @@ -148,6 +153,7 @@ struct virtio_net_ctrl_mac { #define VIRTIO_NET_CTRL_MAC 1 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 + #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 /* * Control VLAN filtering -- cgit v0.10.2 From 441d9d327f1e770f5aa76fd91735851ac6e1e236 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 21 Jan 2013 00:39:24 +0000 Subject: net: move rx and tx hash functions to net/core/flow_dissector.c __skb_tx_hash() and __skb_get_rxhash() are all for calculating hash value based by some fields in skb, mostly used for selecting queues by device drivers. Meanwhile, net/core/dev.c is bloating. Cc: "David S. Miller" Cc: Eric Dumazet Cc: Ben Hutchings Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index b6d2b32..c69cd87 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -134,7 +134,6 @@ #include #include #include -#include #include "net-sysfs.h" @@ -2636,136 +2635,6 @@ out: return rc; } -static u32 hashrnd __read_mostly; - -/* - * Returns a Tx hash based on the given packet descriptor a Tx queues' number - * to be used as a distribution range. - */ -u16 __skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb, - unsigned int num_tx_queues) -{ - u32 hash; - u16 qoffset = 0; - u16 qcount = num_tx_queues; - - if (skb_rx_queue_recorded(skb)) { - hash = skb_get_rx_queue(skb); - while (unlikely(hash >= num_tx_queues)) - hash -= num_tx_queues; - return hash; - } - - if (dev->num_tc) { - u8 tc = netdev_get_prio_tc_map(dev, skb->priority); - qoffset = dev->tc_to_txq[tc].offset; - qcount = dev->tc_to_txq[tc].count; - } - - if (skb->sk && skb->sk->sk_hash) - hash = skb->sk->sk_hash; - else - hash = (__force u16) skb->protocol; - hash = jhash_1word(hash, hashrnd); - - return (u16) (((u64) hash * qcount) >> 32) + qoffset; -} -EXPORT_SYMBOL(__skb_tx_hash); - -static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index) -{ - if (unlikely(queue_index >= dev->real_num_tx_queues)) { - net_warn_ratelimited("%s selects TX queue %d, but real number of TX queues is %d\n", - dev->name, queue_index, - dev->real_num_tx_queues); - return 0; - } - return queue_index; -} - -static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb) -{ -#ifdef CONFIG_XPS - struct xps_dev_maps *dev_maps; - struct xps_map *map; - int queue_index = -1; - - rcu_read_lock(); - dev_maps = rcu_dereference(dev->xps_maps); - if (dev_maps) { - map = rcu_dereference( - dev_maps->cpu_map[raw_smp_processor_id()]); - if (map) { - if (map->len == 1) - queue_index = map->queues[0]; - else { - u32 hash; - if (skb->sk && skb->sk->sk_hash) - hash = skb->sk->sk_hash; - else - hash = (__force u16) skb->protocol ^ - skb->rxhash; - hash = jhash_1word(hash, hashrnd); - queue_index = map->queues[ - ((u64)hash * map->len) >> 32]; - } - if (unlikely(queue_index >= dev->real_num_tx_queues)) - queue_index = -1; - } - } - rcu_read_unlock(); - - return queue_index; -#else - return -1; -#endif -} - -u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb) -{ - struct sock *sk = skb->sk; - int queue_index = sk_tx_queue_get(sk); - - if (queue_index < 0 || skb->ooo_okay || - queue_index >= dev->real_num_tx_queues) { - int new_index = get_xps_queue(dev, skb); - if (new_index < 0) - new_index = skb_tx_hash(dev, skb); - - if (queue_index != new_index && sk) { - struct dst_entry *dst = - rcu_dereference_check(sk->sk_dst_cache, 1); - - if (dst && skb_dst(skb) == dst) - sk_tx_queue_set(sk, queue_index); - - } - - queue_index = new_index; - } - - return queue_index; -} -EXPORT_SYMBOL(__netdev_pick_tx); - -struct netdev_queue *netdev_pick_tx(struct net_device *dev, - struct sk_buff *skb) -{ - int queue_index = 0; - - if (dev->real_num_tx_queues != 1) { - const struct net_device_ops *ops = dev->netdev_ops; - if (ops->ndo_select_queue) - queue_index = ops->ndo_select_queue(dev, skb); - else - queue_index = __netdev_pick_tx(dev, skb); - queue_index = dev_cap_txqueue(dev, queue_index); - } - - skb_set_queue_mapping(skb, queue_index); - return netdev_get_tx_queue(dev, queue_index); -} - static void qdisc_pkt_len_init(struct sk_buff *skb) { const struct skb_shared_info *shinfo = skb_shinfo(skb); @@ -3015,41 +2884,6 @@ static inline void ____napi_schedule(struct softnet_data *sd, __raise_softirq_irqoff(NET_RX_SOFTIRQ); } -/* - * __skb_get_rxhash: calculate a flow hash based on src/dst addresses - * and src/dst port numbers. Sets rxhash in skb to non-zero hash value - * on success, zero indicates no valid hash. Also, sets l4_rxhash in skb - * if hash is a canonical 4-tuple hash over transport ports. - */ -void __skb_get_rxhash(struct sk_buff *skb) -{ - struct flow_keys keys; - u32 hash; - - if (!skb_flow_dissect(skb, &keys)) - return; - - if (keys.ports) - skb->l4_rxhash = 1; - - /* get a consistent hash (same value on both flow directions) */ - if (((__force u32)keys.dst < (__force u32)keys.src) || - (((__force u32)keys.dst == (__force u32)keys.src) && - ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]))) { - swap(keys.dst, keys.src); - swap(keys.port16[0], keys.port16[1]); - } - - hash = jhash_3words((__force u32)keys.dst, - (__force u32)keys.src, - (__force u32)keys.ports, hashrnd); - if (!hash) - hash = 1; - - skb->rxhash = hash; -} -EXPORT_SYMBOL(__skb_get_rxhash); - #ifdef CONFIG_RPS /* One global table that all flow-based protocols share. */ @@ -7308,12 +7142,3 @@ out: } subsys_initcall(net_dev_init); - -static int __init initialize_hashrnd(void) -{ - get_random_bytes(&hashrnd, sizeof(hashrnd)); - return 0; -} - -late_initcall_sync(initialize_hashrnd); - diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 466820b..9d4c720 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -143,3 +143,176 @@ ipv6: return true; } EXPORT_SYMBOL(skb_flow_dissect); + +static u32 hashrnd __read_mostly; + +/* + * __skb_get_rxhash: calculate a flow hash based on src/dst addresses + * and src/dst port numbers. Sets rxhash in skb to non-zero hash value + * on success, zero indicates no valid hash. Also, sets l4_rxhash in skb + * if hash is a canonical 4-tuple hash over transport ports. + */ +void __skb_get_rxhash(struct sk_buff *skb) +{ + struct flow_keys keys; + u32 hash; + + if (!skb_flow_dissect(skb, &keys)) + return; + + if (keys.ports) + skb->l4_rxhash = 1; + + /* get a consistent hash (same value on both flow directions) */ + if (((__force u32)keys.dst < (__force u32)keys.src) || + (((__force u32)keys.dst == (__force u32)keys.src) && + ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]))) { + swap(keys.dst, keys.src); + swap(keys.port16[0], keys.port16[1]); + } + + hash = jhash_3words((__force u32)keys.dst, + (__force u32)keys.src, + (__force u32)keys.ports, hashrnd); + if (!hash) + hash = 1; + + skb->rxhash = hash; +} +EXPORT_SYMBOL(__skb_get_rxhash); + +/* + * Returns a Tx hash based on the given packet descriptor a Tx queues' number + * to be used as a distribution range. + */ +u16 __skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb, + unsigned int num_tx_queues) +{ + u32 hash; + u16 qoffset = 0; + u16 qcount = num_tx_queues; + + if (skb_rx_queue_recorded(skb)) { + hash = skb_get_rx_queue(skb); + while (unlikely(hash >= num_tx_queues)) + hash -= num_tx_queues; + return hash; + } + + if (dev->num_tc) { + u8 tc = netdev_get_prio_tc_map(dev, skb->priority); + qoffset = dev->tc_to_txq[tc].offset; + qcount = dev->tc_to_txq[tc].count; + } + + if (skb->sk && skb->sk->sk_hash) + hash = skb->sk->sk_hash; + else + hash = (__force u16) skb->protocol; + hash = jhash_1word(hash, hashrnd); + + return (u16) (((u64) hash * qcount) >> 32) + qoffset; +} +EXPORT_SYMBOL(__skb_tx_hash); + +static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index) +{ + if (unlikely(queue_index >= dev->real_num_tx_queues)) { + net_warn_ratelimited("%s selects TX queue %d, but real number of TX queues is %d\n", + dev->name, queue_index, + dev->real_num_tx_queues); + return 0; + } + return queue_index; +} + +static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb) +{ +#ifdef CONFIG_XPS + struct xps_dev_maps *dev_maps; + struct xps_map *map; + int queue_index = -1; + + rcu_read_lock(); + dev_maps = rcu_dereference(dev->xps_maps); + if (dev_maps) { + map = rcu_dereference( + dev_maps->cpu_map[raw_smp_processor_id()]); + if (map) { + if (map->len == 1) + queue_index = map->queues[0]; + else { + u32 hash; + if (skb->sk && skb->sk->sk_hash) + hash = skb->sk->sk_hash; + else + hash = (__force u16) skb->protocol ^ + skb->rxhash; + hash = jhash_1word(hash, hashrnd); + queue_index = map->queues[ + ((u64)hash * map->len) >> 32]; + } + if (unlikely(queue_index >= dev->real_num_tx_queues)) + queue_index = -1; + } + } + rcu_read_unlock(); + + return queue_index; +#else + return -1; +#endif +} + +u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb) +{ + struct sock *sk = skb->sk; + int queue_index = sk_tx_queue_get(sk); + + if (queue_index < 0 || skb->ooo_okay || + queue_index >= dev->real_num_tx_queues) { + int new_index = get_xps_queue(dev, skb); + if (new_index < 0) + new_index = skb_tx_hash(dev, skb); + + if (queue_index != new_index && sk) { + struct dst_entry *dst = + rcu_dereference_check(sk->sk_dst_cache, 1); + + if (dst && skb_dst(skb) == dst) + sk_tx_queue_set(sk, queue_index); + + } + + queue_index = new_index; + } + + return queue_index; +} +EXPORT_SYMBOL(__netdev_pick_tx); + +struct netdev_queue *netdev_pick_tx(struct net_device *dev, + struct sk_buff *skb) +{ + int queue_index = 0; + + if (dev->real_num_tx_queues != 1) { + const struct net_device_ops *ops = dev->netdev_ops; + if (ops->ndo_select_queue) + queue_index = ops->ndo_select_queue(dev, skb); + else + queue_index = __netdev_pick_tx(dev, skb); + queue_index = dev_cap_txqueue(dev, queue_index); + } + + skb_set_queue_mapping(skb, queue_index); + return netdev_get_tx_queue(dev, queue_index); +} + +static int __init initialize_hashrnd(void) +{ + get_random_bytes(&hashrnd, sizeof(hashrnd)); + return 0; +} + +late_initcall_sync(initialize_hashrnd); -- cgit v0.10.2 From f490be049ba0a3b194bed3a0dfbdcab1ef0ae063 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Jan 2013 09:58:50 +0000 Subject: dsa: use an unique and non conflicting bus name for the slave MII bus The slave MII bus registered by the DSA code is using the parent MII bus as part of its name (ds->master_mii_bus_id), in case the parent MII bus name is already 16 characters long (such as d0072004.mdio-mi) we will get the following WARN_ON in dsa_switch_setup() when calling mdiobus_register(): [ 79.088782] ------------[ cut here ]------------ [ 79.093448] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0x80/0xa0() [ 79.099831] sysfs: cannot create duplicate filename '/class/mdio_bus/d0072004.mdio-mi' This is a genuine warning, because the DSA slave MII bus will also be named d0072004.mdio-mi, and since MII_BUS_ID_SIZE is 17 characters long (with null-terminator) the following will truncate the slave MII bus id: snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-%d:%.2x", ds->master_mii_bus->id, ds->pd->sw_addr); Fix this by using dsa-: which is guaranteed to be unique. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/net/dsa/slave.c b/net/dsa/slave.c index f434558..6ebd8fb 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -41,8 +41,8 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds) ds->slave_mii_bus->name = "dsa slave smi"; ds->slave_mii_bus->read = dsa_slave_phy_read; ds->slave_mii_bus->write = dsa_slave_phy_write; - snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s:%.2x", - ds->master_mii_bus->id, ds->pd->sw_addr); + snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "dsa-%d:%.2x", + ds->index, ds->pd->sw_addr); ds->slave_mii_bus->parent = &ds->master_mii_bus->dev; } -- cgit v0.10.2 From f9bf5a2ca6cc331f32e3dd9cf16ced7215d0e6e8 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Jan 2013 09:58:51 +0000 Subject: dsa: make dsa_switch_setup check for valid port names This patch changes dsa_switch_setup() to ensure that at least one valid valid port name is specified and will bail out with an error in case we walked the maximum number of port with a valid port name found. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index 45295ca..2bc62ea 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -80,6 +80,7 @@ dsa_switch_setup(struct dsa_switch_tree *dst, int index, int ret; char *name; int i; + bool valid_name_found = false; /* * Probe for switch model. @@ -131,8 +132,13 @@ dsa_switch_setup(struct dsa_switch_tree *dst, int index, } else { ds->phys_port_mask |= 1 << i; } + valid_name_found = true; } + if (!valid_name_found && i == DSA_MAX_PORTS) { + ret = -EINVAL; + goto out; + } /* * If the CPU connects to this switch, set the switch tree -- cgit v0.10.2 From b820bb6b996966d93a5442b5fbf803ea58e7f487 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Mon, 21 Jan 2013 09:58:50 +0000 Subject: ndisc: Do not try to update "updated" time if neighbour has already gone. Commit 2152caea ("ipv6: Do not depend on rt->n in rt6_probe().") introduce a bug to try to update "updated" time in neighbour structure. Update the "updated" time only if neighbour is available. Bug was found by Dan Carpenter Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 2d94d5a..f3328bc 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -492,10 +492,10 @@ static void rt6_probe(struct rt6_info *rt) struct in6_addr mcaddr; struct in6_addr *target; - neigh->updated = jiffies; - - if (neigh) + if (neigh) { + neigh->updated = jiffies; write_unlock(&neigh->lock); + } target = (struct in6_addr *)&rt->rt6i_gateway; addrconf_addr_solict_mult(target, &mcaddr); -- cgit v0.10.2 From 56567c6f8751c633581ca7c8e1cf08eed503f5ea Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jan 2013 03:02:48 +0000 Subject: drivers/net/ethernet/sfc/ptp.c: adjust duplicate test Delete successive tests to the same location. rc was previously tested and not subsequently updated. efx_phc_adjtime can return an error code, so the call is updated so that is tested instead. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // Signed-off-by: Julia Lawall Acked-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c index 0767043f..3f93624 100644 --- a/drivers/net/ethernet/sfc/ptp.c +++ b/drivers/net/ethernet/sfc/ptp.c @@ -1439,7 +1439,7 @@ static int efx_phc_settime(struct ptp_clock_info *ptp, delta = timespec_sub(*e_ts, time_now); - efx_phc_adjtime(ptp, timespec_to_ns(&delta)); + rc = efx_phc_adjtime(ptp, timespec_to_ns(&delta)); if (rc != 0) return rc; -- cgit v0.10.2 From 03f18285cd2c2c065c6f5a4046e1eee0b45e4e0e Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:20 +0000 Subject: isdn/divert: fix readability damage Fix up some of the readibility deterioration caused by last year's ISDN whitespace coding style cleanup. Note that the checkpatch complaints all apply to the state of the source before this patch as well, and in many cases even more so. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/divert/divert_init.c b/drivers/isdn/divert/divert_init.c index 5374c25..267dede 100644 --- a/drivers/isdn/divert/divert_init.c +++ b/drivers/isdn/divert/divert_init.c @@ -22,13 +22,13 @@ MODULE_LICENSE("GPL"); /****************************************/ /* structure containing interface to hl */ /****************************************/ -isdn_divert_if divert_if = -{ DIVERT_IF_MAGIC, /* magic value */ - DIVERT_CMD_REG, /* register cmd */ - ll_callback, /* callback routine from ll */ - NULL, /* command still not specified */ - NULL, /* drv_to_name */ - NULL, /* name_to_drv */ +isdn_divert_if divert_if = { + DIVERT_IF_MAGIC, /* magic value */ + DIVERT_CMD_REG, /* register cmd */ + ll_callback, /* callback routine from ll */ + NULL, /* command still not specified */ + NULL, /* drv_to_name */ + NULL, /* name_to_drv */ }; /*************************/ @@ -36,14 +36,15 @@ isdn_divert_if divert_if = /* no cmd line parms */ /*************************/ static int __init divert_init(void) -{ int i; +{ + int i; - if (divert_dev_init()) - { printk(KERN_WARNING "dss1_divert: cannot install device, not loaded\n"); + if (divert_dev_init()) { + printk(KERN_WARNING "dss1_divert: cannot install device, not loaded\n"); return (-EIO); } - if ((i = DIVERT_REG_NAME(&divert_if)) != DIVERT_NO_ERR) - { divert_dev_deinit(); + if ((i = DIVERT_REG_NAME(&divert_if)) != DIVERT_NO_ERR) { + divert_dev_deinit(); printk(KERN_WARNING "dss1_divert: error %d registering module, not loaded\n", i); return (-EIO); } @@ -61,13 +62,13 @@ static void __exit divert_exit(void) spin_lock_irqsave(&divert_lock, flags); divert_if.cmd = DIVERT_CMD_REL; /* release */ - if ((i = DIVERT_REG_NAME(&divert_if)) != DIVERT_NO_ERR) - { printk(KERN_WARNING "dss1_divert: error %d releasing module\n", i); + if ((i = DIVERT_REG_NAME(&divert_if)) != DIVERT_NO_ERR) { + printk(KERN_WARNING "dss1_divert: error %d releasing module\n", i); spin_unlock_irqrestore(&divert_lock, flags); return; } - if (divert_dev_deinit()) - { printk(KERN_WARNING "dss1_divert: device busy, remove cancelled\n"); + if (divert_dev_deinit()) { + printk(KERN_WARNING "dss1_divert: device busy, remove cancelled\n"); spin_unlock_irqrestore(&divert_lock, flags); return; } diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c index e61e55f..db432e6 100644 --- a/drivers/isdn/divert/isdn_divert.c +++ b/drivers/isdn/divert/isdn_divert.c @@ -19,8 +19,8 @@ /**********************************/ /* structure keeping calling info */ /**********************************/ -struct call_struc -{ isdn_ctrl ics; /* delivered setup + driver parameters */ +struct call_struc { + isdn_ctrl ics; /* delivered setup + driver parameters */ ulong divert_id; /* Id delivered to user */ unsigned char akt_state; /* actual state */ char deflect_dest[35]; /* deflection destination */ @@ -34,8 +34,8 @@ struct call_struc /********************************************/ /* structure keeping deflection table entry */ /********************************************/ -struct deflect_struc -{ struct deflect_struc *next, *prev; +struct deflect_struc { + struct deflect_struc *next, *prev; divert_rule rule; /* used rule */ }; @@ -64,16 +64,16 @@ static void deflect_timer_expire(ulong arg) del_timer(&cs->timer); /* delete active timer */ spin_unlock_irqrestore(&divert_lock, flags); - switch (cs->akt_state) - { case DEFLECT_PROCEED: - cs->ics.command = ISDN_CMD_HANGUP; /* cancel action */ - divert_if.ll_cmd(&cs->ics); - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - break; + switch (cs->akt_state) { + case DEFLECT_PROCEED: + cs->ics.command = ISDN_CMD_HANGUP; /* cancel action */ + divert_if.ll_cmd(&cs->ics); + spin_lock_irqsave(&divert_lock, flags); + cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ + cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); + add_timer(&cs->timer); + spin_unlock_irqrestore(&divert_lock, flags); + break; case DEFLECT_ALERT: cs->ics.command = ISDN_CMD_REDIR; /* protocol */ @@ -111,7 +111,8 @@ static void deflect_timer_expire(ulong arg) int cf_command(int drvid, int mode, u_char proc, char *msn, u_char service, char *fwd_nr, ulong *procid) -{ unsigned long flags; +{ + unsigned long flags; int retval, msnlen; int fwd_len; char *p, *ielenp, tmp[60]; @@ -130,8 +131,8 @@ int cf_command(int drvid, int mode, *p++ = 1; /* length */ *p++ = service; /* service to handle */ - if (mode == 1) - { if (!*fwd_nr) return (-EINVAL); /* destination missing */ + if (mode == 1) { + if (!*fwd_nr) return (-EINVAL); /* destination missing */ if (strchr(fwd_nr, '.')) return (-EINVAL); /* subaddress not allowed */ fwd_len = strlen(fwd_nr); *p++ = 0x30; /* number enumeration */ @@ -144,12 +145,12 @@ int cf_command(int drvid, int mode, msnlen = strlen(msn); *p++ = 0x80; /* msn number */ - if (msnlen > 1) - { *p++ = msnlen; /* length */ + if (msnlen > 1) { + *p++ = msnlen; /* length */ strcpy(p, msn); p += msnlen; - } - else *p++ = 0; + } else + *p++ = 0; *ielenp = p - ielenp - 1; /* set total IE length */ @@ -186,14 +187,13 @@ int cf_command(int drvid, int mode, retval = divert_if.ll_cmd(&cs->ics); /* execute command */ - if (!retval) - { cs->prev = NULL; + if (!retval) { + cs->prev = NULL; spin_lock_irqsave(&divert_lock, flags); cs->next = divert_head; divert_head = cs; spin_unlock_irqrestore(&divert_lock, flags); - } - else + } else kfree(cs); return (retval); } /* cf_command */ @@ -203,15 +203,16 @@ int cf_command(int drvid, int mode, /* handle a external deflection command */ /****************************************/ int deflect_extern_action(u_char cmd, ulong callid, char *to_nr) -{ struct call_struc *cs; +{ + struct call_struc *cs; isdn_ctrl ic; unsigned long flags; int i; if ((cmd & 0x7F) > 2) return (-EINVAL); /* invalid command */ cs = divert_head; /* start of parameter list */ - while (cs) - { if (cs->divert_id == callid) break; /* found */ + while (cs) { + if (cs->divert_id == callid) break; /* found */ cs = cs->next; } /* search entry */ if (!cs) return (-EINVAL); /* invalid callid */ @@ -220,32 +221,30 @@ int deflect_extern_action(u_char cmd, ulong callid, char *to_nr) ic.arg = cs->ics.arg; i = -EINVAL; if (cs->akt_state == DEFLECT_AUTODEL) return (i); /* no valid call */ - switch (cmd & 0x7F) - { case 0: /* hangup */ - del_timer(&cs->timer); - ic.command = ISDN_CMD_HANGUP; - i = divert_if.ll_cmd(&ic); - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - break; + switch (cmd & 0x7F) { + case 0: /* hangup */ + del_timer(&cs->timer); + ic.command = ISDN_CMD_HANGUP; + i = divert_if.ll_cmd(&ic); + spin_lock_irqsave(&divert_lock, flags); + cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ + cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); + add_timer(&cs->timer); + spin_unlock_irqrestore(&divert_lock, flags); + break; case 1: /* alert */ if (cs->akt_state == DEFLECT_ALERT) return (0); cmd &= 0x7F; /* never wait */ del_timer(&cs->timer); ic.command = ISDN_CMD_ALERT; - if ((i = divert_if.ll_cmd(&ic))) - { + if ((i = divert_if.ll_cmd(&ic))) { spin_lock_irqsave(&divert_lock, flags); cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); add_timer(&cs->timer); spin_unlock_irqrestore(&divert_lock, flags); - } - else + } else cs->akt_state = DEFLECT_ALERT; break; @@ -254,15 +253,13 @@ int deflect_extern_action(u_char cmd, ulong callid, char *to_nr) strlcpy(cs->ics.parm.setup.phone, to_nr, sizeof(cs->ics.parm.setup.phone)); strcpy(cs->ics.parm.setup.eazmsn, "Testtext manual"); ic.command = ISDN_CMD_REDIR; - if ((i = divert_if.ll_cmd(&ic))) - { + if ((i = divert_if.ll_cmd(&ic))) { spin_lock_irqsave(&divert_lock, flags); cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); add_timer(&cs->timer); spin_unlock_irqrestore(&divert_lock, flags); - } - else + } else cs->akt_state = DEFLECT_ALERT; break; @@ -274,19 +271,19 @@ int deflect_extern_action(u_char cmd, ulong callid, char *to_nr) /* insert a new rule before idx */ /********************************/ int insertrule(int idx, divert_rule *newrule) -{ struct deflect_struc *ds, *ds1 = NULL; +{ + struct deflect_struc *ds, *ds1 = NULL; unsigned long flags; - if (!(ds = kmalloc(sizeof(struct deflect_struc), - GFP_KERNEL))) + if (!(ds = kmalloc(sizeof(struct deflect_struc), GFP_KERNEL))) return (-ENOMEM); /* no memory */ ds->rule = *newrule; /* set rule */ spin_lock_irqsave(&divert_lock, flags); - if (idx >= 0) - { ds1 = table_head; + if (idx >= 0) { + ds1 = table_head; while ((ds1) && (idx > 0)) { idx--; ds1 = ds1->next; @@ -294,17 +291,16 @@ int insertrule(int idx, divert_rule *newrule) if (!ds1) idx = -1; } - if (idx < 0) - { ds->prev = table_tail; /* previous entry */ + if (idx < 0) { + ds->prev = table_tail; /* previous entry */ ds->next = NULL; /* end of chain */ if (ds->prev) ds->prev->next = ds; /* last forward */ else table_head = ds; /* is first entry */ table_tail = ds; /* end of queue */ - } - else - { ds->next = ds1; /* next entry */ + } else { + ds->next = ds1; /* next entry */ ds->prev = ds1->prev; /* prev entry */ ds1->prev = ds; /* backward chain old element */ if (!ds->prev) @@ -319,17 +315,18 @@ int insertrule(int idx, divert_rule *newrule) /* delete the rule at position idx */ /***********************************/ int deleterule(int idx) -{ struct deflect_struc *ds, *ds1; +{ + struct deflect_struc *ds, *ds1; unsigned long flags; - if (idx < 0) - { spin_lock_irqsave(&divert_lock, flags); + if (idx < 0) { + spin_lock_irqsave(&divert_lock, flags); ds = table_head; table_head = NULL; table_tail = NULL; spin_unlock_irqrestore(&divert_lock, flags); - while (ds) - { ds1 = ds; + while (ds) { + ds1 = ds; ds = ds->next; kfree(ds1); } @@ -339,13 +336,12 @@ int deleterule(int idx) spin_lock_irqsave(&divert_lock, flags); ds = table_head; - while ((ds) && (idx > 0)) - { idx--; + while ((ds) && (idx > 0)) { + idx--; ds = ds->next; } - if (!ds) - { + if (!ds) { spin_unlock_irqrestore(&divert_lock, flags); return (-EINVAL); } @@ -369,12 +365,13 @@ int deleterule(int idx) /* get a pointer to a specific rule number */ /*******************************************/ divert_rule *getruleptr(int idx) -{ struct deflect_struc *ds = table_head; +{ + struct deflect_struc *ds = table_head; if (idx < 0) return (NULL); - while ((ds) && (idx >= 0)) - { if (!(idx--)) - { return (&ds->rule); + while ((ds) && (idx >= 0)) { + if (!(idx--)) { + return (&ds->rule); break; } ds = ds->next; @@ -386,7 +383,8 @@ divert_rule *getruleptr(int idx) /* called from common module on an incoming call */ /*************************************************/ static int isdn_divert_icall(isdn_ctrl *ic) -{ int retval = 0; +{ + int retval = 0; unsigned long flags; struct call_struc *cs = NULL; struct deflect_struc *dv; @@ -394,8 +392,8 @@ static int isdn_divert_icall(isdn_ctrl *ic) u_char accept; /* first check the internal deflection table */ - for (dv = table_head; dv; dv = dv->next) - { /* scan table */ + for (dv = table_head; dv; dv = dv->next) { + /* scan table */ if (((dv->rule.callopt == 1) && (ic->command == ISDN_STAT_ICALLW)) || ((dv->rule.callopt == 2) && (ic->command == ISDN_STAT_ICALL))) continue; /* call option check */ @@ -409,10 +407,10 @@ static int isdn_divert_icall(isdn_ctrl *ic) p = dv->rule.my_msn; p1 = ic->parm.setup.eazmsn; accept = 0; - while (*p) - { /* complete compare */ - if (*p == '-') - { accept = 1; /* call accepted */ + while (*p) { + /* complete compare */ + if (*p == '-') { + accept = 1; /* call accepted */ break; } if (*p++ != *p1++) @@ -422,14 +420,15 @@ static int isdn_divert_icall(isdn_ctrl *ic) } /* complete compare */ if (!accept) continue; /* not accepted */ - if ((strcmp(dv->rule.caller, "0")) || (ic->parm.setup.phone[0])) - { p = dv->rule.caller; + if ((strcmp(dv->rule.caller, "0")) || + (ic->parm.setup.phone[0])) { + p = dv->rule.caller; p1 = ic->parm.setup.phone; accept = 0; - while (*p) - { /* complete compare */ - if (*p == '-') - { accept = 1; /* call accepted */ + while (*p) { + /* complete compare */ + if (*p == '-') { + accept = 1; /* call accepted */ break; } if (*p++ != *p1++) @@ -440,10 +439,10 @@ static int isdn_divert_icall(isdn_ctrl *ic) if (!accept) continue; /* not accepted */ } - switch (dv->rule.action) - { case DEFLECT_IGNORE: - return (0); - break; + switch (dv->rule.action) { + case DEFLECT_IGNORE: + return (0); + break; case DEFLECT_ALERT: case DEFLECT_PROCEED: @@ -465,31 +464,29 @@ static int isdn_divert_icall(isdn_ctrl *ic) cs->ics.parm.setup.screen = dv->rule.screen; if (dv->rule.waittime) cs->timer.expires = jiffies + (HZ * dv->rule.waittime); + else if (dv->rule.action == DEFLECT_PROCEED) + cs->timer.expires = jiffies + (HZ * extern_wait_max); else - if (dv->rule.action == DEFLECT_PROCEED) - cs->timer.expires = jiffies + (HZ * extern_wait_max); - else - cs->timer.expires = 0; + cs->timer.expires = 0; cs->akt_state = dv->rule.action; spin_lock_irqsave(&divert_lock, flags); cs->divert_id = next_id++; /* new sequence number */ spin_unlock_irqrestore(&divert_lock, flags); cs->prev = NULL; - if (cs->akt_state == DEFLECT_ALERT) - { strcpy(cs->deflect_dest, dv->rule.to_nr); - if (!cs->timer.expires) - { strcpy(ic->parm.setup.eazmsn, "Testtext direct"); + if (cs->akt_state == DEFLECT_ALERT) { + strcpy(cs->deflect_dest, dv->rule.to_nr); + if (!cs->timer.expires) { + strcpy(ic->parm.setup.eazmsn, + "Testtext direct"); ic->parm.setup.screen = dv->rule.screen; strlcpy(ic->parm.setup.phone, dv->rule.to_nr, sizeof(ic->parm.setup.phone)); cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); retval = 5; - } - else + } else retval = 1; /* alerting */ - } - else - { cs->deflect_dest[0] = '\0'; + } else { + cs->deflect_dest[0] = '\0'; retval = 4; /* only proceed */ } sprintf(cs->info, "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n", @@ -505,8 +502,8 @@ static int isdn_divert_icall(isdn_ctrl *ic) dv->rule.waittime, cs->deflect_dest); if ((dv->rule.action == DEFLECT_REPORT) || - (dv->rule.action == DEFLECT_REJECT)) - { put_info_buffer(cs->info); + (dv->rule.action == DEFLECT_REJECT)) { + put_info_buffer(cs->info); kfree(cs); /* remove */ return ((dv->rule.action == DEFLECT_REPORT) ? 0 : 2); /* nothing to do */ } @@ -519,8 +516,8 @@ static int isdn_divert_icall(isdn_ctrl *ic) break; } /* scan_table */ - if (cs) - { cs->prev = NULL; + if (cs) { + cs->prev = NULL; spin_lock_irqsave(&divert_lock, flags); cs->next = divert_head; divert_head = cs; @@ -529,21 +526,21 @@ static int isdn_divert_icall(isdn_ctrl *ic) put_info_buffer(cs->info); return (retval); - } - else + } else return (0); } /* isdn_divert_icall */ void deleteprocs(void) -{ struct call_struc *cs, *cs1; +{ + struct call_struc *cs, *cs1; unsigned long flags; spin_lock_irqsave(&divert_lock, flags); cs = divert_head; divert_head = NULL; - while (cs) - { del_timer(&cs->timer); + while (cs) { + del_timer(&cs->timer); cs1 = cs; cs = cs->next; kfree(cs1); @@ -555,12 +552,13 @@ void deleteprocs(void) /* put a address including address type into buffer */ /****************************************************/ static int put_address(char *st, u_char *p, int len) -{ u_char retval = 0; +{ + u_char retval = 0; u_char adr_typ = 0; /* network standard */ if (len < 2) return (retval); - if (*p == 0xA1) - { retval = *(++p) + 2; /* total length */ + if (*p == 0xA1) { + retval = *(++p) + 2; /* total length */ if (retval > len) return (0); /* too short */ len = retval - 2; /* remaining length */ if (len < 3) return (0); @@ -572,16 +570,13 @@ static int put_address(char *st, u_char *p, int len) if (*p++ != 0x12) return (0); if (*p > len) return (0); /* check number length */ len = *p++; - } - else - if (*p == 0x80) - { retval = *(++p) + 2; /* total length */ - if (retval > len) return (0); - len = retval - 2; - p++; - } - else - return (0); /* invalid address information */ + } else if (*p == 0x80) { + retval = *(++p) + 2; /* total length */ + if (retval > len) return (0); + len = retval - 2; + p++; + } else + return (0); /* invalid address information */ sprintf(st, "%d ", adr_typ); st += strlen(st); @@ -598,7 +593,8 @@ static int put_address(char *st, u_char *p, int len) /* report a successful interrogation */ /*************************************/ static int interrogate_success(isdn_ctrl *ic, struct call_struc *cs) -{ char *src = ic->parm.dss1_io.data; +{ + char *src = ic->parm.dss1_io.data; int restlen = ic->parm.dss1_io.datalen; int cnt = 1; u_char n, n1; @@ -608,50 +604,44 @@ static int interrogate_success(isdn_ctrl *ic, struct call_struc *cs) if (*src++ != 0x30) return (-101); if ((n = *src++) > 0x81) return (-102); /* invalid length field */ restlen -= 2; /* remaining bytes */ - if (n == 0x80) - { if (restlen < 2) return (-103); + if (n == 0x80) { + if (restlen < 2) return (-103); if ((*(src + restlen - 1)) || (*(src + restlen - 2))) return (-104); restlen -= 2; - } + } else if (n == 0x81) { + n = *src++; + restlen--; + if (n > restlen) return (-105); + restlen = n; + } else if (n > restlen) + return (-106); else - if (n == 0x81) - { n = *src++; - restlen--; - if (n > restlen) return (-105); - restlen = n; - } - else - if (n > restlen) return (-106); - else - restlen = n; /* standard format */ + restlen = n; /* standard format */ if (restlen < 3) return (-107); /* no procedure */ if ((*src++ != 2) || (*src++ != 1) || (*src++ != 0x0B)) return (-108); restlen -= 3; if (restlen < 2) return (-109); /* list missing */ - if (*src == 0x31) - { src++; + if (*src == 0x31) { + src++; if ((n = *src++) > 0x81) return (-110); /* invalid length field */ restlen -= 2; /* remaining bytes */ - if (n == 0x80) - { if (restlen < 2) return (-111); + if (n == 0x80) { + if (restlen < 2) return (-111); if ((*(src + restlen - 1)) || (*(src + restlen - 2))) return (-112); restlen -= 2; - } + } else if (n == 0x81) { + n = *src++; + restlen--; + if (n > restlen) return (-113); + restlen = n; + } else if (n > restlen) + return (-114); else - if (n == 0x81) - { n = *src++; - restlen--; - if (n > restlen) return (-113); - restlen = n; - } - else - if (n > restlen) return (-114); - else - restlen = n; /* standard format */ + restlen = n; /* standard format */ } /* result list header */ - while (restlen >= 2) - { stp = st; + while (restlen >= 2) { + stp = st; sprintf(stp, "%d 0x%lx %d %s ", DIVERT_REPORT, ic->parm.dss1_io.ll_id, cnt++, divert_if.drv_to_name(ic->driver)); stp += strlen(stp); @@ -674,8 +664,8 @@ static int interrogate_success(isdn_ctrl *ic, struct call_struc *cs) sprintf(stp, "%d ", (*p++) & 0xFF); stp += strlen(stp); n -= 6; - if (n > 2) - { if (*p++ != 0x30) continue; + if (n > 2) { + if (*p++ != 0x30) continue; if (*p > (n - 2)) continue; n = *p++; if (!(n1 = put_address(stp, p, n & 0xFF))) continue; @@ -692,58 +682,58 @@ static int interrogate_success(isdn_ctrl *ic, struct call_struc *cs) /* callback for protocol specific extensions */ /*********************************************/ static int prot_stat_callback(isdn_ctrl *ic) -{ struct call_struc *cs, *cs1; +{ + struct call_struc *cs, *cs1; int i; unsigned long flags; cs = divert_head; /* start of list */ cs1 = NULL; - while (cs) - { if (ic->driver == cs->ics.driver) - { switch (cs->ics.arg) - { case DSS1_CMD_INVOKE: - if ((cs->ics.parm.dss1_io.ll_id == ic->parm.dss1_io.ll_id) && - (cs->ics.parm.dss1_io.hl_id == ic->parm.dss1_io.hl_id)) - { switch (ic->arg) - { case DSS1_STAT_INVOKE_ERR: - sprintf(cs->info, "128 0x%lx 0x%x\n", - ic->parm.dss1_io.ll_id, - ic->parm.dss1_io.timeout); - put_info_buffer(cs->info); - break; - - case DSS1_STAT_INVOKE_RES: - switch (cs->ics.parm.dss1_io.proc) - { case 7: - case 8: - put_info_buffer(cs->info); - break; - - case 11: - i = interrogate_success(ic, cs); - if (i) - sprintf(cs->info, "%d 0x%lx %d\n", DIVERT_REPORT, - ic->parm.dss1_io.ll_id, i); - put_info_buffer(cs->info); - break; - - default: - printk(KERN_WARNING "dss1_divert: unknown proc %d\n", cs->ics.parm.dss1_io.proc); - break; - } - + while (cs) { + if (ic->driver == cs->ics.driver) { + switch (cs->ics.arg) { + case DSS1_CMD_INVOKE: + if ((cs->ics.parm.dss1_io.ll_id == ic->parm.dss1_io.ll_id) && + (cs->ics.parm.dss1_io.hl_id == ic->parm.dss1_io.hl_id)) { + switch (ic->arg) { + case DSS1_STAT_INVOKE_ERR: + sprintf(cs->info, "128 0x%lx 0x%x\n", + ic->parm.dss1_io.ll_id, + ic->parm.dss1_io.timeout); + put_info_buffer(cs->info); + break; + + case DSS1_STAT_INVOKE_RES: + switch (cs->ics.parm.dss1_io.proc) { + case 7: + case 8: + put_info_buffer(cs->info); + break; + case 11: + i = interrogate_success(ic, cs); + if (i) + sprintf(cs->info, "%d 0x%lx %d\n", DIVERT_REPORT, + ic->parm.dss1_io.ll_id, i); + put_info_buffer(cs->info); break; default: - printk(KERN_WARNING "dss1_divert unknown invoke answer %lx\n", ic->arg); + printk(KERN_WARNING "dss1_divert: unknown proc %d\n", cs->ics.parm.dss1_io.proc); break; } - cs1 = cs; /* remember structure */ - cs = NULL; - continue; /* abort search */ - } /* id found */ - break; + + break; + + default: + printk(KERN_WARNING "dss1_divert unknown invoke answer %lx\n", ic->arg); + break; + } + cs1 = cs; /* remember structure */ + cs = NULL; + continue; /* abort search */ + } /* id found */ + break; case DSS1_CMD_INVOKE_ABORT: printk(KERN_WARNING "dss1_divert unhandled invoke abort\n"); @@ -757,13 +747,12 @@ static int prot_stat_callback(isdn_ctrl *ic) } /* driver ok */ } - if (!cs1) - { printk(KERN_WARNING "dss1_divert unhandled process\n"); + if (!cs1) { + printk(KERN_WARNING "dss1_divert unhandled process\n"); return (0); } - if (cs1->ics.driver == -1) - { + if (cs1->ics.driver == -1) { spin_lock_irqsave(&divert_lock, flags); del_timer(&cs1->timer); if (cs1->prev) @@ -784,20 +773,22 @@ static int prot_stat_callback(isdn_ctrl *ic) /* status callback from HL */ /***************************/ static int isdn_divert_stat_callback(isdn_ctrl *ic) -{ struct call_struc *cs, *cs1; +{ + struct call_struc *cs, *cs1; unsigned long flags; int retval; retval = -1; cs = divert_head; /* start of list */ - while (cs) - { if ((ic->driver == cs->ics.driver) && (ic->arg == cs->ics.arg)) - { switch (ic->command) - { case ISDN_STAT_DHUP: - sprintf(cs->info, "129 0x%lx\n", cs->divert_id); - del_timer(&cs->timer); - cs->ics.driver = -1; - break; + while (cs) { + if ((ic->driver == cs->ics.driver) && + (ic->arg == cs->ics.arg)) { + switch (ic->command) { + case ISDN_STAT_DHUP: + sprintf(cs->info, "129 0x%lx\n", cs->divert_id); + del_timer(&cs->timer); + cs->ics.driver = -1; + break; case ISDN_STAT_CAUSE: sprintf(cs->info, "130 0x%lx %s\n", cs->divert_id, ic->parm.num); @@ -818,8 +809,7 @@ static int isdn_divert_stat_callback(isdn_ctrl *ic) } cs1 = cs; cs = cs->next; - if (cs1->ics.driver == -1) - { + if (cs1->ics.driver == -1) { spin_lock_irqsave(&divert_lock, flags); if (cs1->prev) cs1->prev->next = cs1->next; /* forward link */ @@ -840,20 +830,19 @@ static int isdn_divert_stat_callback(isdn_ctrl *ic) /********************/ int ll_callback(isdn_ctrl *ic) { - switch (ic->command) - { case ISDN_STAT_ICALL: + switch (ic->command) { + case ISDN_STAT_ICALL: case ISDN_STAT_ICALLW: return (isdn_divert_icall(ic)); break; case ISDN_STAT_PROT: - if ((ic->arg & 0xFF) == ISDN_PTYPE_EURO) - { if (ic->arg != DSS1_STAT_INVOKE_BRD) + if ((ic->arg & 0xFF) == ISDN_PTYPE_EURO) { + if (ic->arg != DSS1_STAT_INVOKE_BRD) return (prot_stat_callback(ic)); else return (0); /* DSS1 invoke broadcast */ - } - else + } else return (-1); /* protocol not euro */ default: diff --git a/drivers/isdn/divert/isdn_divert.h b/drivers/isdn/divert/isdn_divert.h index 42f2893..55033dd8 100644 --- a/drivers/isdn/divert/isdn_divert.h +++ b/drivers/isdn/divert/isdn_divert.h @@ -43,8 +43,8 @@ #define DEFLECT_ALL_IDS 0xFFFFFFFF /* all drivers selected */ -typedef struct -{ ulong drvid; /* driver ids, bit mapped */ +typedef struct { + ulong drvid; /* driver ids, bit mapped */ char my_msn[35]; /* desired msn, subaddr allowed */ char caller[35]; /* caller id, partial string with * + subaddr allowed */ char to_nr[35]; /* deflected to number incl. subaddress */ @@ -65,18 +65,18 @@ typedef struct u_char waittime; /* maximum wait time for proceeding */ } divert_rule; -typedef union -{ int drv_version; /* return of driver version */ - struct - { int drvid; /* id of driver */ +typedef union { + int drv_version; /* return of driver version */ + struct { + int drvid; /* id of driver */ char drvnam[30]; /* name of driver */ } getid; - struct - { int ruleidx; /* index of rule */ + struct { + int ruleidx; /* index of rule */ divert_rule rule; /* rule parms */ } getsetrule; - struct - { u_char subcmd; /* 0 = hangup/reject, + struct { + u_char subcmd; /* 0 = hangup/reject, 1 = alert, 2 = deflect */ ulong callid; /* id of call delivered by ascii output */ @@ -84,8 +84,8 @@ typedef union else uus1 string (maxlen 31), data from rule used if empty */ } fwd_ctrl; - struct - { int drvid; /* id of driver */ + struct { + int drvid; /* id of driver */ u_char cfproc; /* cfu = 0, cfb = 1, cfnr = 2 */ ulong procid; /* process id returned when no error */ u_char service; /* basically coded service, 0 = all */ @@ -104,8 +104,8 @@ typedef union /**************************************************/ /* structure keeping ascii info for device output */ /**************************************************/ -struct divert_info -{ struct divert_info *next; +struct divert_info { + struct divert_info *next; ulong usage_cnt; /* number of files still to work */ char info_start[2]; /* info string start */ }; -- cgit v0.10.2 From d2ca8481941efca3300227f0a60003af21ad2895 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:20 +0000 Subject: isdn/gigaset: leave DLE mode before hanging up Some firmware releases of Gigaset M105 do not accept AT+VLS=0 command in DLE mode, so always leave DLE mode before sending the command. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c index 2e6963d..e2383ec 100644 --- a/drivers/isdn/gigaset/ev-layer.c +++ b/drivers/isdn/gigaset/ev-layer.c @@ -1693,6 +1693,11 @@ static void process_command_flags(struct cardstate *cs) for (i = 0; i < cs->channels; ++i) { bcs = cs->bcs + i; if (bcs->at_state.pending_commands & PC_HUP) { + if (cs->dle) { + cs->curchannel = bcs->channel; + schedule_sequence(cs, &cs->at_state, SEQ_DLE0); + return; + } bcs->at_state.pending_commands &= ~PC_HUP; if (bcs->at_state.pending_commands & PC_CID) { /* not yet dialing: PC_NOCID is sufficient */ -- cgit v0.10.2 From cdc4827098d128423297720dcf33792d85079b78 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:20 +0000 Subject: isdn/gigaset: beautify interface.c Avoid forward declarations and remove a needless initialization. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 67abf3f..20b7e7a 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -112,36 +112,6 @@ static int if_config(struct cardstate *cs, int *arg) } /*** the terminal driver ***/ -/* stolen from usbserial and some other tty drivers */ - -static int if_open(struct tty_struct *tty, struct file *filp); -static void if_close(struct tty_struct *tty, struct file *filp); -static int if_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static int if_write_room(struct tty_struct *tty); -static int if_chars_in_buffer(struct tty_struct *tty); -static void if_throttle(struct tty_struct *tty); -static void if_unthrottle(struct tty_struct *tty); -static void if_set_termios(struct tty_struct *tty, struct ktermios *old); -static int if_tiocmget(struct tty_struct *tty); -static int if_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int if_write(struct tty_struct *tty, - const unsigned char *buf, int count); - -static const struct tty_operations if_ops = { - .open = if_open, - .close = if_close, - .ioctl = if_ioctl, - .write = if_write, - .write_room = if_write_room, - .chars_in_buffer = if_chars_in_buffer, - .set_termios = if_set_termios, - .throttle = if_throttle, - .unthrottle = if_unthrottle, - .tiocmget = if_tiocmget, - .tiocmset = if_tiocmset, -}; static int if_open(struct tty_struct *tty, struct file *filp) { @@ -355,7 +325,7 @@ done: static int if_write_room(struct tty_struct *tty) { struct cardstate *cs = tty->driver_data; - int retval = -ENODEV; + int retval; gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__); @@ -498,6 +468,20 @@ out: mutex_unlock(&cs->mutex); } +static const struct tty_operations if_ops = { + .open = if_open, + .close = if_close, + .ioctl = if_ioctl, + .write = if_write, + .write_room = if_write_room, + .chars_in_buffer = if_chars_in_buffer, + .set_termios = if_set_termios, + .throttle = if_throttle, + .unthrottle = if_unthrottle, + .tiocmget = if_tiocmget, + .tiocmset = if_tiocmset, +}; + /* wakeup tasklet for the write operation */ static void if_wake(unsigned long data) -- cgit v0.10.2 From bc882b1880b94d3731b462d3a213885073b350ed Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:21 +0000 Subject: isdn/gigaset: beautify common.c Rearrange the gigaset_freecs() function to make it more readable, and adapt gigaset_initcs() accordingly. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index 6849a11..7c78144 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -467,11 +467,6 @@ void gigaset_freecs(struct cardstate *cs) mutex_lock(&cs->mutex); - if (!cs->bcs) - goto f_cs; - if (!cs->inbuf) - goto f_bcs; - spin_lock_irqsave(&cs->lock, flags); cs->running = 0; spin_unlock_irqrestore(&cs->lock, flags); /* event handler and timer are @@ -507,17 +502,16 @@ void gigaset_freecs(struct cardstate *cs) gig_dbg(DEBUG_INIT, "clearing at_state"); clear_at_state(&cs->at_state); dealloc_temp_at_states(cs); + clear_events(cs); tty_port_destroy(&cs->port); /* fall through */ case 0: /* error in basic setup */ - clear_events(cs); gig_dbg(DEBUG_INIT, "freeing inbuf"); kfree(cs->inbuf); + kfree(cs->bcs); } -f_bcs: gig_dbg(DEBUG_INIT, "freeing bcs[]"); - kfree(cs->bcs); -f_cs: gig_dbg(DEBUG_INIT, "freeing cs"); + mutex_unlock(&cs->mutex); free_cs(cs); } @@ -687,19 +681,6 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, return NULL; } - gig_dbg(DEBUG_INIT, "allocating bcs[0..%d]", channels - 1); - cs->bcs = kmalloc(channels * sizeof(struct bc_state), GFP_KERNEL); - if (!cs->bcs) { - pr_err("out of memory\n"); - goto error; - } - gig_dbg(DEBUG_INIT, "allocating inbuf"); - cs->inbuf = kmalloc(sizeof(struct inbuf_t), GFP_KERNEL); - if (!cs->inbuf) { - pr_err("out of memory\n"); - goto error; - } - cs->cs_init = 0; cs->channels = channels; cs->onechannel = onechannel; @@ -729,6 +710,12 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, cs->mode = M_UNKNOWN; cs->mstate = MS_UNINITIALIZED; + cs->bcs = kmalloc(channels * sizeof(struct bc_state), GFP_KERNEL); + cs->inbuf = kmalloc(sizeof(struct inbuf_t), GFP_KERNEL); + if (!cs->bcs || !cs->inbuf) { + pr_err("out of memory\n"); + goto error; + } ++cs->cs_init; gig_dbg(DEBUG_INIT, "setting up at_state"); -- cgit v0.10.2 From 63b203b43baeb1ba5fab0b7f3611e0f0a2a4a7ab Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:21 +0000 Subject: isdn/gigaset: beautify ev-layer.c Cosmetic changes to drivers/isdn/gigaset/ev-layer.c and drivers/isdn/gigaset/gigaset.h to improve readability. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c index e2383ec..7459b12 100644 --- a/drivers/isdn/gigaset/ev-layer.c +++ b/drivers/isdn/gigaset/ev-layer.c @@ -351,10 +351,11 @@ struct reply_t gigaset_tab_cid[] = static const struct resp_type_t { - unsigned char *response; - int resp_code; - int type; -} resp_type[] = + char *response; + int resp_code; + int type; +} +resp_type[] = { {"OK", RSP_OK, RT_NOTHING}, {"ERROR", RSP_ERROR, RT_NOTHING}, @@ -374,11 +375,12 @@ static const struct resp_type_t { }; static const struct zsau_resp_t { - unsigned char *str; - int code; -} zsau_resp[] = + char *str; + int code; +} +zsau_resp[] = { - {"OUTGOING_CALL_PROCEEDING", ZSAU_OUTGOING_CALL_PROCEEDING}, + {"OUTGOING_CALL_PROCEEDING", ZSAU_PROCEEDING}, {"CALL_DELIVERED", ZSAU_CALL_DELIVERED}, {"ACTIVE", ZSAU_ACTIVE}, {"DISCONNECT_IND", ZSAU_DISCONNECT_IND}, @@ -434,7 +436,7 @@ void gigaset_handle_modem_response(struct cardstate *cs) len = cs->cbytes; if (!len) { /* ignore additional LFs/CRs (M10x config mode or cx100) */ - gig_dbg(DEBUG_MCMD, "skipped EOL [%02X]", cs->respdata[len]); + gig_dbg(DEBUG_MCMD, "skipped EOL [%02X]", cs->respdata[0]); return; } cs->respdata[len] = 0; @@ -707,27 +709,29 @@ static void schedule_init(struct cardstate *cs, int state) cs->commands_pending = 1; } -/* Add "AT" to a command, add the cid, dle encode it, send the result to the - hardware. */ -static void send_command(struct cardstate *cs, const char *cmd, int cid, - int dle, gfp_t kmallocflags) +/* send an AT command + * adding the "AT" prefix, cid and DLE encapsulation as appropriate + */ +static void send_command(struct cardstate *cs, const char *cmd, + struct at_state_t *at_state) { + int cid = at_state->cid; struct cmdbuf_t *cb; size_t buflen; buflen = strlen(cmd) + 12; /* DLE ( A T 1 2 3 4 5 DLE ) \0 */ - cb = kmalloc(sizeof(struct cmdbuf_t) + buflen, kmallocflags); + cb = kmalloc(sizeof(struct cmdbuf_t) + buflen, GFP_ATOMIC); if (!cb) { dev_err(cs->dev, "%s: out of memory\n", __func__); return; } if (cid > 0 && cid <= 65535) cb->len = snprintf(cb->buf, buflen, - dle ? "\020(AT%d%s\020)" : "AT%d%s", + cs->dle ? "\020(AT%d%s\020)" : "AT%d%s", cid, cmd); else cb->len = snprintf(cb->buf, buflen, - dle ? "\020(AT%s\020)" : "AT%s", + cs->dle ? "\020(AT%s\020)" : "AT%s", cmd); cb->offset = 0; cb->next = NULL; @@ -886,7 +890,7 @@ static void finish_shutdown(struct cardstate *cs) gigaset_isdn_stop(cs); } - /* The rest is done by cleanup_cs () in user mode. */ + /* The rest is done by cleanup_cs() in process context. */ cs->cmd_result = -ENODEV; cs->waiting = 0; @@ -976,10 +980,9 @@ exit: } static void handle_icall(struct cardstate *cs, struct bc_state *bcs, - struct at_state_t **p_at_state) + struct at_state_t *at_state) { int retval; - struct at_state_t *at_state = *p_at_state; retval = gigaset_isdn_icall(at_state); switch (retval) { @@ -1176,7 +1179,7 @@ static void do_action(int action, struct cardstate *cs, spin_unlock_irqrestore(&cs->lock, flags); break; case ACT_ICALL: - handle_icall(cs, bcs, p_at_state); + handle_icall(cs, bcs, at_state); break; case ACT_FAILSDOWN: dev_warn(cs->dev, "Could not shut down the device.\n"); @@ -1264,7 +1267,7 @@ static void do_action(int action, struct cardstate *cs, cs->commands_pending = 1; break; } - /* fall through */ + /* bad cid: fall through */ case ACT_FAILCID: cs->cur_at_seq = SEQ_NONE; channel = cs->curchannel; @@ -1339,7 +1342,6 @@ static void do_action(int action, struct cardstate *cs, *p_resp_code = RSP_ERROR; break; } - /*at_state->getstring = 1;*/ cs->gotfwver = 0; break; case ACT_GOTVER: @@ -1471,7 +1473,6 @@ static void process_event(struct cardstate *cs, struct event_t *ev) int rcode; int genresp = 0; int resp_code = RSP_ERROR; - int sendcid; struct at_state_t *at_state; int index; int curact; @@ -1499,7 +1500,6 @@ static void process_event(struct cardstate *cs, struct event_t *ev) at_state->ConState, ev->type); bcs = at_state->bcs; - sendcid = at_state->cid; /* Setting the pointer to the dial array */ rep = at_state->replystruct; @@ -1510,10 +1510,12 @@ static void process_event(struct cardstate *cs, struct event_t *ev) || !at_state->timer_active) { ev->type = RSP_NONE; /* old timeout */ gig_dbg(DEBUG_EVENT, "old timeout"); - } else if (!at_state->waiting) - gig_dbg(DEBUG_EVENT, "timeout occurred"); - else - gig_dbg(DEBUG_EVENT, "stopped waiting"); + } else { + if (at_state->waiting) + gig_dbg(DEBUG_EVENT, "stopped waiting"); + else + gig_dbg(DEBUG_EVENT, "timeout occurred"); + } } spin_unlock_irqrestore(&cs->lock, flags); @@ -1561,45 +1563,40 @@ static void process_event(struct cardstate *cs, struct event_t *ev) do_action(rep->action[curact], cs, bcs, &at_state, &p_command, &genresp, &resp_code, ev); if (!at_state) - break; /* may be freed after disconnect */ + /* at_state destroyed by disconnect */ + return; } - if (at_state) { - /* Jump to the next con-state regarding the array */ - if (rep->new_ConState >= 0) - at_state->ConState = rep->new_ConState; + /* Jump to the next con-state regarding the array */ + if (rep->new_ConState >= 0) + at_state->ConState = rep->new_ConState; - if (genresp) { - spin_lock_irqsave(&cs->lock, flags); + if (genresp) { + spin_lock_irqsave(&cs->lock, flags); + at_state->timer_expires = 0; + at_state->timer_active = 0; + spin_unlock_irqrestore(&cs->lock, flags); + gigaset_add_event(cs, at_state, resp_code, NULL, 0, NULL); + } else { + /* Send command to modem if not NULL... */ + if (p_command) { + if (cs->connected) + send_command(cs, p_command, at_state); + else + gigaset_add_event(cs, at_state, RSP_NODEV, + NULL, 0, NULL); + } + + spin_lock_irqsave(&cs->lock, flags); + if (!rep->timeout) { at_state->timer_expires = 0; at_state->timer_active = 0; - spin_unlock_irqrestore(&cs->lock, flags); - gigaset_add_event(cs, at_state, resp_code, - NULL, 0, NULL); - } else { - /* Send command to modem if not NULL... */ - if (p_command) { - if (cs->connected) - send_command(cs, p_command, - sendcid, cs->dle, - GFP_ATOMIC); - else - gigaset_add_event(cs, at_state, - RSP_NODEV, - NULL, 0, NULL); - } - - spin_lock_irqsave(&cs->lock, flags); - if (!rep->timeout) { - at_state->timer_expires = 0; - at_state->timer_active = 0; - } else if (rep->timeout > 0) { /* new timeout */ - at_state->timer_expires = rep->timeout * 10; - at_state->timer_active = 1; - ++at_state->timer_index; - } - spin_unlock_irqrestore(&cs->lock, flags); + } else if (rep->timeout > 0) { /* new timeout */ + at_state->timer_expires = rep->timeout * 10; + at_state->timer_active = 1; + ++at_state->timer_index; } + spin_unlock_irqrestore(&cs->lock, flags); } } diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h index 8e2fc8f..eb63a0f 100644 --- a/drivers/isdn/gigaset/gigaset.h +++ b/drivers/isdn/gigaset/gigaset.h @@ -111,11 +111,10 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg, /* connection state */ #define ZSAU_NONE 0 -#define ZSAU_DISCONNECT_IND 4 -#define ZSAU_OUTGOING_CALL_PROCEEDING 1 #define ZSAU_PROCEEDING 1 #define ZSAU_CALL_DELIVERED 2 #define ZSAU_ACTIVE 3 +#define ZSAU_DISCONNECT_IND 4 #define ZSAU_NULL 5 #define ZSAU_DISCONNECT_REQ 6 #define ZSAU_UNKNOWN -1 @@ -183,18 +182,22 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg, #define AT_NUM 7 /* variables in struct at_state_t */ +/* - numeric */ #define VAR_ZSAU 0 #define VAR_ZDLE 1 #define VAR_ZCTP 2 +/* total number */ #define VAR_NUM 3 - +/* - string */ #define STR_NMBR 0 #define STR_ZCPN 1 #define STR_ZCON 2 #define STR_ZBC 3 #define STR_ZHLC 4 +/* total number */ #define STR_NUM 5 +/* event types */ #define EV_TIMEOUT -105 #define EV_IF_VER -106 #define EV_PROC_CIDMODE -107 -- cgit v0.10.2 From 6e07ba3e6ad939c89befc2588e72bf37038f7f53 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 8 Jan 2013 22:00:39 -0500 Subject: drivers/net: delete 486 Apricot support The Apricot was a 486 PC with 4MB RAM, and an on-board ethernet via an intel i82596 hard-wired to i/o 0x300. Those who were using linux in the 1990's will recall that the i82596 driver was not one of the more stable or widely used drivers of its day. Combine that with the extremely limited resources of the platform, and it is truly time to expire the support for this thing. There are some old m68k targets who were also using this chip, so rather than poll the m68k user base, we simply cut out the x86/Apricot support here in this commit. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 5637c26..c6e5194 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -165,7 +165,7 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ {ewrk3_probe, 0}, #endif -#if defined(CONFIG_APRICOT) || defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ +#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ {i82596_probe, 0}, #endif #ifdef CONFIG_EL1 /* 3c501 */ diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c index 6aa927a..1c54e22 100644 --- a/drivers/net/ethernet/i825xx/82596.c +++ b/drivers/net/ethernet/i825xx/82596.c @@ -95,9 +95,6 @@ static char version[] __initdata = #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE) #define ENABLE_BVME6000_NET #endif -#if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE) -#define ENABLE_APRICOT -#endif #ifdef ENABLE_MVME16x_NET #include @@ -120,8 +117,15 @@ static char version[] __initdata = #define WSWAPtbd(x) ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) #define WSWAPchar(x) ((char *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) #define ISCP_BUSY 0x00010000 -#define MACH_IS_APRICOT 0 #else +#error 82596.c: unknown architecture +#endif + +/* + * These were the intel versions, left here for reference. There + * are currently no x86 users of this legacy i82596 chip. + */ +#if 0 #define WSWAPrfd(x) ((struct i596_rfd *)((long)x)) #define WSWAPrbd(x) ((struct i596_rbd *)((long)x)) #define WSWAPiscp(x) ((struct i596_iscp *)((long)x)) @@ -130,7 +134,6 @@ static char version[] __initdata = #define WSWAPtbd(x) ((struct i596_tbd *)((long)x)) #define WSWAPchar(x) ((char *)((long)x)) #define ISCP_BUSY 0x0001 -#define MACH_IS_APRICOT 1 #endif /* @@ -383,11 +386,6 @@ static inline void CA(struct net_device *dev) i = *(volatile u32 *) (dev->base_addr); } #endif -#ifdef ENABLE_APRICOT - if (MACH_IS_APRICOT) { - outw(0, (short) (dev->base_addr) + 4); - } -#endif } @@ -617,9 +615,6 @@ static void rebuild_rx_bufs(struct net_device *dev) static int init_i596_mem(struct net_device *dev) { struct i596_private *lp = dev->ml_priv; -#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT) - short ioaddr = dev->base_addr; -#endif unsigned long flags; MPU_PORT(dev, PORT_RESET, NULL); @@ -653,18 +648,6 @@ static int init_i596_mem(struct net_device *dev) MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp)); -#elif defined(ENABLE_APRICOT) - - { - u32 scp = virt_to_bus(&lp->scp); - - /* change the scp address */ - outw(0, ioaddr); - outw(0, ioaddr); - outb(4, ioaddr + 0xf); - outw(scp | 2, ioaddr); - outw(scp >> 16, ioaddr); - } #endif lp->last_cmd = jiffies; @@ -677,10 +660,6 @@ static int init_i596_mem(struct net_device *dev) if (MACH_IS_BVME6000) lp->scp.sysbus = 0x0000004c; #endif -#ifdef ENABLE_APRICOT - if (MACH_IS_APRICOT) - lp->scp.sysbus = 0x00440000; -#endif lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp)); lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb)); @@ -698,10 +677,6 @@ static int init_i596_mem(struct net_device *dev) DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name)); -#if defined(ENABLE_APRICOT) - (void) inb(ioaddr + 0x10); - outb(4, ioaddr + 0xf); -#endif CA(dev); if (wait_istat(dev,lp,1000,"initialization timed out")) @@ -1203,43 +1178,6 @@ struct net_device * __init i82596_probe(int unit) goto found; } #endif -#ifdef ENABLE_APRICOT - { - int checksum = 0; - int ioaddr = 0x300; - - /* this is easy the ethernet interface can only be at 0x300 */ - /* first check nothing is already registered here */ - - if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) { - printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr); - err = -EBUSY; - goto out; - } - - dev->base_addr = ioaddr; - - for (i = 0; i < 8; i++) { - eth_addr[i] = inb(ioaddr + 8 + i); - checksum += eth_addr[i]; - } - - /* checksum is a multiple of 0x100, got this wrong first time - some machines have 0x100, some 0x200. The DOS driver doesn't - even bother with the checksum. - Some other boards trip the checksum.. but then appear as - ether address 0. Trap these - AC */ - - if ((checksum % 0x100) || - (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) { - err = -ENODEV; - goto out1; - } - - dev->irq = 10; - goto found; - } -#endif err = -ENODEV; goto out; @@ -1296,9 +1234,6 @@ out2: #endif free_page ((u32)(dev->mem_start)); out1: -#ifdef ENABLE_APRICOT - release_region(dev->base_addr, I596_TOTAL_SIZE); -#endif out: free_netdev(dev); return ERR_PTR(err); @@ -1455,10 +1390,6 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id) *ethirq = 3; } #endif -#ifdef ENABLE_APRICOT - (void) inb(ioaddr + 0x10); - outb(4, ioaddr + 0xf); -#endif CA(dev); DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name)); @@ -1589,11 +1520,6 @@ static void set_multicast_list(struct net_device *dev) #ifdef MODULE static struct net_device *dev_82596; -#ifdef ENABLE_APRICOT -module_param(irq, int, 0); -MODULE_PARM_DESC(irq, "Apricot IRQ number"); -#endif - static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "i82596 debug mask"); @@ -1620,10 +1546,6 @@ void __exit cleanup_module(void) IOMAP_FULL_CACHING); #endif free_page ((u32)(dev_82596->mem_start)); -#ifdef ENABLE_APRICOT - /* If we don't do this, we can't re-insmod it later. */ - release_region(dev_82596->base_addr, I596_TOTAL_SIZE); -#endif free_netdev(dev_82596); } diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 70f8c2d..c39698a 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -50,17 +50,6 @@ config ARM_ETHER1 If you have an Acorn system with one of these (AKA25) network cards, you should say Y to this option if you wish to use it with Linux. -config APRICOT - tristate "Apricot Xen-II on board Ethernet" - depends on ISA - ---help--- - If you have a network (Ethernet) controller of this type, say Y and - read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called apricot. - config BVME6000_NET tristate "BVME6000 Ethernet support" depends on BVME6000 diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index 6adff85..e5ab9d0 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_LP486E) += lp486e.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o obj-$(CONFIG_ZNET) += znet.o -obj-$(CONFIG_APRICOT) += 82596.o obj-$(CONFIG_LASI_82596) += lasi_82596.o obj-$(CONFIG_SNI_82596) += sni_82596.o obj-$(CONFIG_MVME16x_NET) += 82596.o -- cgit v0.10.2 From 5205939d0f15803cc402e32ac5b886dbb7c50b99 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 8 Jan 2013 22:11:54 -0500 Subject: drivers/net: delete intel 486 panther onboard ethernet support This driver was specific to a "professional workstation" line of products from around 1993 that used the i82596 ethernet chip as an on-board ethernet solution. With a 486 processor, and the premium top of the line model maxing out at a clock speed of 50MHz, we can safely retire this support. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index c39698a..46edb81 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -93,14 +93,6 @@ config LASI_82596 Say Y here to support the builtin Intel 82596 ethernet controller found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. -config LP486E - tristate "LP486E on board Ethernet" - depends on ISA - ---help--- - Say Y here to support the 82596-based on-board Ethernet controller - for the Panther motherboard, which is one of the two shipped in the - Intel Professional Workstation. - config MVME16x_NET tristate "MVME16x Ethernet support" depends on MVME16x diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index e5ab9d0..4f01584 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_EEXPRESS) += eexpress.o obj-$(CONFIG_EEXPRESS_PRO) += eepro.o obj-$(CONFIG_ELPLUS) += 3c505.o obj-$(CONFIG_EL16) += 3c507.o -obj-$(CONFIG_LP486E) += lp486e.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o obj-$(CONFIG_ZNET) += znet.o diff --git a/drivers/net/ethernet/i825xx/lp486e.c b/drivers/net/ethernet/i825xx/lp486e.c deleted file mode 100644 index 3735bfa..0000000 --- a/drivers/net/ethernet/i825xx/lp486e.c +++ /dev/null @@ -1,1337 +0,0 @@ -/* Intel Professional Workstation/panther ethernet driver */ -/* lp486e.c: A panther 82596 ethernet driver for linux. */ -/* - History and copyrights: - - Driver skeleton - Written 1993 by Donald Becker. - Copyright 1993 United States Government as represented by the Director, - National Security Agency. This software may only be used and - distributed according to the terms of the GNU General Public License - as modified by SRC, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Apricot - Written 1994 by Mark Evans. - This driver is for the Apricot 82596 bus-master interface - - Modularised 12/94 Mark Evans - - Professional Workstation - Derived from apricot.c by Ard van Breemen - || - - Credits: - Thanks to Murphy Software BV for letting me write this in their time. - Well, actually, I get paid doing this... - (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for - more information on the Professional Workstation) - - Present version - aeb@cwi.nl -*/ -/* - There are currently two motherboards that I know of in the - professional workstation. The only one that I know is the - intel panther motherboard. -- ard -*/ -/* -The pws is equipped with an intel 82596. This is a very intelligent controller -which runs its own micro-code. Communication with the hostprocessor is done -through linked lists of commands and buffers in the hostprocessors memory. -A complete description of the 82596 is available from intel. Search for -a file called "29021806.pdf". It is a complete description of the chip itself. -To use it for the pws some additions are needed regarding generation of -the PORT and CA signal, and the interrupt glue needed for a pc. -I/O map: -PORT SIZE ACTION MEANING -0xCB0 2 WRITE Lower 16 bits for PORT command -0xCB2 2 WRITE Upper 16 bits for PORT command, and issue of PORT command -0xCB4 1 WRITE Generation of CA signal -0xCB8 1 WRITE Clear interrupt glue -All other communication is through memory! -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "lp486e" - -/* debug print flags */ -#define LOG_SRCDST 0x80000000 -#define LOG_STATINT 0x40000000 -#define LOG_STARTINT 0x20000000 - -#define i596_debug debug - -static int i596_debug = 0; - -static const char * const medianame[] = { - "10baseT", "AUI", - "10baseT-FD", "AUI-FD", -}; - -#define LP486E_TOTAL_SIZE 16 - -#define I596_NULL (0xffffffff) - -#define CMD_EOL 0x8000 /* The last command of the list, stop. */ -#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ -#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ - -#define CMD_FLEX 0x0008 /* Enable flexible memory model */ - -enum commands { - CmdNOP = 0, - CmdIASetup = 1, - CmdConfigure = 2, - CmdMulticastList = 3, - CmdTx = 4, - CmdTDR = 5, - CmdDump = 6, - CmdDiagnose = 7 -}; - -#if 0 -static const char *CUcmdnames[8] = { "NOP", "IASetup", "Configure", "MulticastList", - "Tx", "TDR", "Dump", "Diagnose" }; -#endif - -/* Status word bits */ -#define STAT_CX 0x8000 /* The CU finished executing a command - with the Interrupt bit set */ -#define STAT_FR 0x4000 /* The RU finished receiving a frame */ -#define STAT_CNA 0x2000 /* The CU left the active state */ -#define STAT_RNR 0x1000 /* The RU left the active state */ -#define STAT_ACK (STAT_CX | STAT_FR | STAT_CNA | STAT_RNR) -#define STAT_CUS 0x0700 /* Status of CU: 0: idle, 1: suspended, - 2: active, 3-7: unused */ -#define STAT_RUS 0x00f0 /* Status of RU: 0: idle, 1: suspended, - 2: no resources, 4: ready, - 10: no resources due to no more RBDs, - 12: no more RBDs, other: unused */ -#define STAT_T 0x0008 /* Bus throttle timers loaded */ -#define STAT_ZERO 0x0807 /* Always zero */ - -#if 0 -static char *CUstates[8] = { - "idle", "suspended", "active", 0, 0, 0, 0, 0 -}; -static char *RUstates[16] = { - "idle", "suspended", "no resources", 0, "ready", 0, 0, 0, - 0, 0, "no RBDs", 0, "out of RBDs", 0, 0, 0 -}; - -static void -i596_out_status(int status) { - int bad = 0; - char *s; - - printk("status %4.4x:", status); - if (status == 0xffff) - printk(" strange..\n"); - else { - if (status & STAT_CX) - printk(" CU done"); - if (status & STAT_CNA) - printk(" CU stopped"); - if (status & STAT_FR) - printk(" got a frame"); - if (status & STAT_RNR) - printk(" RU stopped"); - if (status & STAT_T) - printk(" throttled"); - if (status & STAT_ZERO) - bad = 1; - s = CUstates[(status & STAT_CUS) >> 8]; - if (!s) - bad = 1; - else - printk(" CU(%s)", s); - s = RUstates[(status & STAT_RUS) >> 4]; - if (!s) - bad = 1; - else - printk(" RU(%s)", s); - if (bad) - printk(" bad status"); - printk("\n"); - } -} -#endif - -/* Command word bits */ -#define ACK_CX 0x8000 -#define ACK_FR 0x4000 -#define ACK_CNA 0x2000 -#define ACK_RNR 0x1000 - -#define CUC_START 0x0100 -#define CUC_RESUME 0x0200 -#define CUC_SUSPEND 0x0300 -#define CUC_ABORT 0x0400 - -#define RX_START 0x0010 -#define RX_RESUME 0x0020 -#define RX_SUSPEND 0x0030 -#define RX_ABORT 0x0040 - -typedef u32 phys_addr; - -static inline phys_addr -va_to_pa(void *x) { - return x ? virt_to_bus(x) : I596_NULL; -} - -static inline void * -pa_to_va(phys_addr x) { - return (x == I596_NULL) ? NULL : bus_to_virt(x); -} - -/* status bits for cmd */ -#define CMD_STAT_C 0x8000 /* CU command complete */ -#define CMD_STAT_B 0x4000 /* CU command in progress */ -#define CMD_STAT_OK 0x2000 /* CU command completed without errors */ -#define CMD_STAT_A 0x1000 /* CU command abnormally terminated */ - -struct i596_cmd { /* 8 bytes */ - unsigned short status; - unsigned short command; - phys_addr pa_next; /* va_to_pa(struct i596_cmd *next) */ -}; - -#define EOF 0x8000 -#define SIZE_MASK 0x3fff - -struct i596_tbd { - unsigned short size; - unsigned short pad; - phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */ - phys_addr pa_data; /* va_to_pa(char *data) */ - struct sk_buff *skb; -}; - -struct tx_cmd { - struct i596_cmd cmd; - phys_addr pa_tbd; /* va_to_pa(struct i596_tbd *tbd) */ - unsigned short size; - unsigned short pad; -}; - -/* status bits for rfd */ -#define RFD_STAT_C 0x8000 /* Frame reception complete */ -#define RFD_STAT_B 0x4000 /* Frame reception in progress */ -#define RFD_STAT_OK 0x2000 /* Frame received without errors */ -#define RFD_STATUS 0x1fff -#define RFD_LENGTH_ERR 0x1000 -#define RFD_CRC_ERR 0x0800 -#define RFD_ALIGN_ERR 0x0400 -#define RFD_NOBUFS_ERR 0x0200 -#define RFD_DMA_ERR 0x0100 /* DMA overrun failure to acquire system bus */ -#define RFD_SHORT_FRAME_ERR 0x0080 -#define RFD_NOEOP_ERR 0x0040 -#define RFD_TRUNC_ERR 0x0020 -#define RFD_MULTICAST 0x0002 /* 0: destination had our address - 1: destination was broadcast/multicast */ -#define RFD_COLLISION 0x0001 - -/* receive frame descriptor */ -struct i596_rfd { - unsigned short stat; - unsigned short cmd; - phys_addr pa_next; /* va_to_pa(struct i596_rfd *next) */ - phys_addr pa_rbd; /* va_to_pa(struct i596_rbd *rbd) */ - unsigned short count; - unsigned short size; - char data[1532]; -}; - -#define RBD_EL 0x8000 -#define RBD_P 0x4000 -#define RBD_SIZEMASK 0x3fff -#define RBD_EOF 0x8000 -#define RBD_F 0x4000 - -/* receive buffer descriptor */ -struct i596_rbd { - unsigned short size; - unsigned short pad; - phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */ - phys_addr pa_data; /* va_to_pa(char *data) */ - phys_addr pa_prev; /* va_to_pa(struct i596_tbd *prev) */ - - /* Driver private part */ - struct sk_buff *skb; -}; - -#define RX_RING_SIZE 64 -#define RX_SKBSIZE (ETH_FRAME_LEN+10) -#define RX_RBD_SIZE 32 - -/* System Control Block - 40 bytes */ -struct i596_scb { - u16 status; /* 0 */ - u16 command; /* 2 */ - phys_addr pa_cmd; /* 4 - va_to_pa(struct i596_cmd *cmd) */ - phys_addr pa_rfd; /* 8 - va_to_pa(struct i596_rfd *rfd) */ - u32 crc_err; /* 12 */ - u32 align_err; /* 16 */ - u32 resource_err; /* 20 */ - u32 over_err; /* 24 */ - u32 rcvdt_err; /* 28 */ - u32 short_err; /* 32 */ - u16 t_on; /* 36 */ - u16 t_off; /* 38 */ -}; - -/* Intermediate System Configuration Pointer - 8 bytes */ -struct i596_iscp { - u32 busy; /* 0 */ - phys_addr pa_scb; /* 4 - va_to_pa(struct i596_scb *scb) */ -}; - -/* System Configuration Pointer - 12 bytes */ -struct i596_scp { - u32 sysbus; /* 0 */ - u32 pad; /* 4 */ - phys_addr pa_iscp; /* 8 - va_to_pa(struct i596_iscp *iscp) */ -}; - -/* Selftest and dump results - needs 16-byte alignment */ -/* - * The size of the dump area is 304 bytes. When the dump is executed - * by the Port command an extra word will be appended to the dump area. - * The extra word is a copy of the Dump status word (containing the - * C, B, OK bits). [I find 0xa006, with a0 for C+OK and 6 for dump] - */ -struct i596_dump { - u16 dump[153]; /* (304 = 130h) + 2 bytes */ -}; - -struct i596_private { /* aligned to a 16-byte boundary */ - struct i596_scp scp; /* 0 - needs 16-byte alignment */ - struct i596_iscp iscp; /* 12 */ - struct i596_scb scb; /* 20 */ - u32 dummy; /* 60 */ - struct i596_dump dump; /* 64 - needs 16-byte alignment */ - - struct i596_cmd set_add; - char eth_addr[8]; /* directly follows set_add */ - - struct i596_cmd set_conf; - char i596_config[16]; /* directly follows set_conf */ - - struct i596_cmd tdr; - unsigned long tdr_stat; /* directly follows tdr */ - - int last_restart; - struct i596_rbd *rbd_list; - struct i596_rbd *rbd_tail; - struct i596_rfd *rx_tail; - struct i596_cmd *cmd_tail; - struct i596_cmd *cmd_head; - int cmd_backlog; - unsigned long last_cmd; - spinlock_t cmd_lock; -}; - -static char init_setup[14] = { - 0x8E, /* length 14 bytes, prefetch on */ - 0xC8, /* default: fifo to 8, monitor off */ - 0x40, /* default: don't save bad frames (apricot.c had 0x80) */ - 0x2E, /* (default is 0x26) - No source address insertion, 8 byte preamble */ - 0x00, /* default priority and backoff */ - 0x60, /* default interframe spacing */ - 0x00, /* default slot time LSB */ - 0xf2, /* default slot time and nr of retries */ - 0x00, /* default various bits - (0: promiscuous mode, 1: broadcast disable, - 2: encoding mode, 3: transmit on no CRS, - 4: no CRC insertion, 5: CRC type, - 6: bit stuffing, 7: padding) */ - 0x00, /* default carrier sense and collision detect */ - 0x40, /* default minimum frame length */ - 0xff, /* (default is 0xff, and that is what apricot.c has; - elp486.c has 0xfb: Enable crc append in memory.) */ - 0x00, /* default: not full duplex */ - 0x7f /* (default is 0x3f) multi IA */ -}; - -static int i596_open(struct net_device *dev); -static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t i596_interrupt(int irq, void *dev_id); -static int i596_close(struct net_device *dev); -static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd); -static void print_eth(char *); -static void set_multicast_list(struct net_device *dev); -static void i596_tx_timeout(struct net_device *dev); - -static int -i596_timeout(struct net_device *dev, char *msg, int ct) { - struct i596_private *lp; - int boguscnt = ct; - - lp = netdev_priv(dev); - while (lp->scb.command) { - if (--boguscnt == 0) { - printk("%s: %s timed out - stat %4.4x, cmd %4.4x\n", - dev->name, msg, - lp->scb.status, lp->scb.command); - return 1; - } - udelay(5); - barrier(); - } - return 0; -} - -static inline int -init_rx_bufs(struct net_device *dev, int num) { - struct i596_private *lp; - struct i596_rfd *rfd; - int i; - // struct i596_rbd *rbd; - - lp = netdev_priv(dev); - lp->scb.pa_rfd = I596_NULL; - - for (i = 0; i < num; i++) { - rfd = kmalloc(sizeof(struct i596_rfd), GFP_KERNEL); - if (rfd == NULL) - break; - - rfd->stat = 0; - rfd->pa_rbd = I596_NULL; - rfd->count = 0; - rfd->size = 1532; - if (i == 0) { - rfd->cmd = CMD_EOL; - lp->rx_tail = rfd; - } else { - rfd->cmd = 0; - } - rfd->pa_next = lp->scb.pa_rfd; - lp->scb.pa_rfd = va_to_pa(rfd); - lp->rx_tail->pa_next = lp->scb.pa_rfd; - } - -#if 0 - for (i = 0; ipad = 0; - rbd->count = 0; - rbd->skb = dev_alloc_skb(RX_SKBSIZE); - if (!rbd->skb) { - printk("dev_alloc_skb failed"); - } - rbd->next = rfd->rbd; - if (i) { - rfd->rbd->prev = rbd; - rbd->size = RX_SKBSIZE; - } else { - rbd->size = (RX_SKBSIZE | RBD_EL); - lp->rbd_tail = rbd; - } - - rfd->rbd = rbd; - } - } - lp->rbd_tail->next = rfd->rbd; -#endif - return i; -} - -static inline void -remove_rx_bufs(struct net_device *dev) { - struct i596_private *lp; - struct i596_rfd *rfd; - - lp = netdev_priv(dev); - lp->rx_tail->pa_next = I596_NULL; - - do { - rfd = pa_to_va(lp->scb.pa_rfd); - lp->scb.pa_rfd = rfd->pa_next; - kfree(rfd); - } while (rfd != lp->rx_tail); - - lp->rx_tail = NULL; - -#if 0 - for (lp->rbd_list) { - } -#endif -} - -#define PORT_RESET 0x00 /* reset 82596 */ -#define PORT_SELFTEST 0x01 /* selftest */ -#define PORT_ALTSCP 0x02 /* alternate SCB address */ -#define PORT_DUMP 0x03 /* dump */ - -#define IOADDR 0xcb0 /* real constant */ -#define IRQ 10 /* default IRQ - can be changed by ECU */ - -/* The 82596 requires two 16-bit write cycles for a port command */ -static inline void -PORT(phys_addr a, unsigned int cmd) { - if (a & 0xf) - printk("lp486e.c: PORT: address not aligned\n"); - outw(((a & 0xffff) | cmd), IOADDR); - outw(((a>>16) & 0xffff), IOADDR+2); -} - -static inline void -CA(void) { - outb(0, IOADDR+4); - udelay(8); -} - -static inline void -CLEAR_INT(void) { - outb(0, IOADDR+8); -} - -#if 0 -/* selftest or dump */ -static void -i596_port_do(struct net_device *dev, int portcmd, char *cmdname) { - struct i596_private *lp = netdev_priv(dev); - u16 *outp; - int i, m; - - memset((void *)&(lp->dump), 0, sizeof(struct i596_dump)); - outp = &(lp->dump.dump[0]); - - PORT(va_to_pa(outp), portcmd); - mdelay(30); /* random, unmotivated */ - - printk("lp486e i82596 %s result:\n", cmdname); - for (m = ARRAY_SIZE(lp->dump.dump); m && lp->dump.dump[m-1] == 0; m--) - ; - for (i = 0; i < m; i++) { - printk(" %04x", lp->dump.dump[i]); - if (i%8 == 7) - printk("\n"); - } - printk("\n"); -} -#endif - -static int -i596_scp_setup(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - int boguscnt; - - /* Setup SCP, ISCP, SCB */ - /* - * sysbus bits: - * only a single byte is significant - here 0x44 - * 0x80: big endian mode (details depend on stepping) - * 0x40: 1 - * 0x20: interrupt pin is active low - * 0x10: lock function disabled - * 0x08: external triggering of bus throttle timers - * 0x06: 00: 82586 compat mode, 01: segmented mode, 10: linear mode - * 0x01: unused - */ - lp->scp.sysbus = 0x00440000; /* linear mode */ - lp->scp.pad = 0; /* must be zero */ - lp->scp.pa_iscp = va_to_pa(&(lp->iscp)); - - /* - * The CPU sets the ISCP to 1 before it gives the first CA() - */ - lp->iscp.busy = 0x0001; - lp->iscp.pa_scb = va_to_pa(&(lp->scb)); - - lp->scb.command = 0; - lp->scb.status = 0; - lp->scb.pa_cmd = I596_NULL; - /* lp->scb.pa_rfd has been initialised already */ - - lp->last_cmd = jiffies; - lp->cmd_backlog = 0; - lp->cmd_head = NULL; - - /* - * Reset the 82596. - * We need to wait 10 systemclock cycles, and - * 5 serial clock cycles. - */ - PORT(0, PORT_RESET); /* address part ignored */ - udelay(100); - - /* - * Before the CA signal is asserted, the default SCP address - * (0x00fffff4) can be changed to a 16-byte aligned value - */ - PORT(va_to_pa(&lp->scp), PORT_ALTSCP); /* change the scp address */ - - /* - * The initialization procedure begins when a - * Channel Attention signal is asserted after a reset. - */ - - CA(); - - /* - * The ISCP busy is cleared by the 82596 after the SCB address is read. - */ - boguscnt = 100; - while (lp->iscp.busy) { - if (--boguscnt == 0) { - /* No i82596 present? */ - printk("%s: i82596 initialization timed out\n", - dev->name); - return 1; - } - udelay(5); - barrier(); - } - /* I find here boguscnt==100, so no delay was required. */ - - return 0; -} - -static int -init_i596(struct net_device *dev) { - struct i596_private *lp; - - if (i596_scp_setup(dev)) - return 1; - - lp = netdev_priv(dev); - lp->scb.command = 0; - - memcpy ((void *)lp->i596_config, init_setup, 14); - lp->set_conf.command = CmdConfigure; - i596_add_cmd(dev, (void *)&lp->set_conf); - - memcpy ((void *)lp->eth_addr, dev->dev_addr, 6); - lp->set_add.command = CmdIASetup; - i596_add_cmd(dev, &lp->set_add); - - lp->tdr.command = CmdTDR; - i596_add_cmd(dev, &lp->tdr); - - if (lp->scb.command && i596_timeout(dev, "i82596 init", 200)) - return 1; - - lp->scb.command = RX_START; - CA(); - - barrier(); - - if (lp->scb.command && i596_timeout(dev, "Receive Unit start", 100)) - return 1; - - return 0; -} - -/* Receive a single frame */ -static inline int -i596_rx_one(struct net_device *dev, struct i596_private *lp, - struct i596_rfd *rfd, int *frames) { - - if (rfd->stat & RFD_STAT_OK) { - /* a good frame */ - int pkt_len = (rfd->count & 0x3fff); - struct sk_buff *skb = netdev_alloc_skb(dev, pkt_len); - - (*frames)++; - - if (rfd->cmd & CMD_EOL) - printk("Received on EOL\n"); - - if (skb == NULL) { - printk ("%s: i596_rx Memory squeeze, " - "dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return 1; - } - - memcpy(skb_put(skb,pkt_len), rfd->data, pkt_len); - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - } else { -#if 0 - printk("Frame reception error status %04x\n", - rfd->stat); -#endif - dev->stats.rx_errors++; - if (rfd->stat & RFD_COLLISION) - dev->stats.collisions++; - if (rfd->stat & RFD_SHORT_FRAME_ERR) - dev->stats.rx_length_errors++; - if (rfd->stat & RFD_DMA_ERR) - dev->stats.rx_over_errors++; - if (rfd->stat & RFD_NOBUFS_ERR) - dev->stats.rx_fifo_errors++; - if (rfd->stat & RFD_ALIGN_ERR) - dev->stats.rx_frame_errors++; - if (rfd->stat & RFD_CRC_ERR) - dev->stats.rx_crc_errors++; - if (rfd->stat & RFD_LENGTH_ERR) - dev->stats.rx_length_errors++; - } - rfd->stat = rfd->count = 0; - return 0; -} - -static int -i596_rx(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - struct i596_rfd *rfd; - int frames = 0; - - while (1) { - rfd = pa_to_va(lp->scb.pa_rfd); - if (!rfd) { - printk(KERN_ERR "i596_rx: NULL rfd?\n"); - return 0; - } -#if 1 - if (rfd->stat && !(rfd->stat & (RFD_STAT_C | RFD_STAT_B))) - printk("SF:%p-%04x\n", rfd, rfd->stat); -#endif - if (!(rfd->stat & RFD_STAT_C)) - break; /* next one not ready */ - if (i596_rx_one(dev, lp, rfd, &frames)) - break; /* out of memory */ - rfd->cmd = CMD_EOL; - lp->rx_tail->cmd = 0; - lp->rx_tail = rfd; - lp->scb.pa_rfd = rfd->pa_next; - barrier(); - } - - return frames; -} - -static void -i596_cleanup_cmd(struct net_device *dev) { - struct i596_private *lp; - struct i596_cmd *cmd; - - lp = netdev_priv(dev); - while (lp->cmd_head) { - cmd = lp->cmd_head; - - lp->cmd_head = pa_to_va(lp->cmd_head->pa_next); - lp->cmd_backlog--; - - switch ((cmd->command) & 0x7) { - case CmdTx: { - struct tx_cmd *tx_cmd = (struct tx_cmd *) cmd; - struct i596_tbd * tx_cmd_tbd; - tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd); - - dev_kfree_skb_any(tx_cmd_tbd->skb); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)tx_cmd); - netif_wake_queue(dev); - break; - } - case CmdMulticastList: { - // unsigned short count = *((unsigned short *) (ptr + 1)); - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)cmd); - break; - } - default: { - cmd->pa_next = I596_NULL; - break; - } - } - barrier(); - } - - if (lp->scb.command && i596_timeout(dev, "i596_cleanup_cmd", 100)) - ; - - lp->scb.pa_cmd = va_to_pa(lp->cmd_head); -} - -static void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) { - - if (lp->scb.command && i596_timeout(dev, "i596_reset", 100)) - ; - - netif_stop_queue(dev); - - lp->scb.command = CUC_ABORT | RX_ABORT; - CA(); - barrier(); - - /* wait for shutdown */ - if (lp->scb.command && i596_timeout(dev, "i596_reset(2)", 400)) - ; - - i596_cleanup_cmd(dev); - i596_rx(dev); - - netif_start_queue(dev); - /*dev_kfree_skb(skb, FREE_WRITE);*/ - init_i596(dev); -} - -static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) { - struct i596_private *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - - cmd->status = 0; - cmd->command |= (CMD_EOL | CMD_INTR); - cmd->pa_next = I596_NULL; - - spin_lock_irqsave(&lp->cmd_lock, flags); - - if (lp->cmd_head) { - lp->cmd_tail->pa_next = va_to_pa(cmd); - } else { - lp->cmd_head = cmd; - if (lp->scb.command && i596_timeout(dev, "i596_add_cmd", 100)) - ; - lp->scb.pa_cmd = va_to_pa(cmd); - lp->scb.command = CUC_START; - CA(); - } - lp->cmd_tail = cmd; - lp->cmd_backlog++; - - lp->cmd_head = pa_to_va(lp->scb.pa_cmd); - spin_unlock_irqrestore(&lp->cmd_lock, flags); - - if (lp->cmd_backlog > 16) { - int tickssofar = jiffies - lp->last_cmd; - if (tickssofar < HZ/4) - return; - - printk(KERN_WARNING "%s: command unit timed out, status resetting.\n", dev->name); - i596_reset(dev, lp, ioaddr); - } -} - -static int i596_open(struct net_device *dev) -{ - int i; - - i = request_irq(dev->irq, i596_interrupt, IRQF_SHARED, dev->name, dev); - if (i) { - printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); - return i; - } - - if ((i = init_rx_bufs(dev, RX_RING_SIZE)) < RX_RING_SIZE) - printk(KERN_ERR "%s: only able to allocate %d receive buffers\n", dev->name, i); - - if (i < 4) { - free_irq(dev->irq, dev); - return -EAGAIN; - } - netif_start_queue(dev); - init_i596(dev); - return 0; /* Always succeed */ -} - -static netdev_tx_t i596_start_xmit (struct sk_buff *skb, struct net_device *dev) { - struct tx_cmd *tx_cmd; - short length; - - length = skb->len; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - tx_cmd = kmalloc((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC); - if (tx_cmd == NULL) { - printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name); - dev->stats.tx_dropped++; - dev_kfree_skb (skb); - } else { - struct i596_tbd *tx_cmd_tbd; - tx_cmd_tbd = (struct i596_tbd *) (tx_cmd + 1); - tx_cmd->pa_tbd = va_to_pa (tx_cmd_tbd); - tx_cmd_tbd->pa_next = I596_NULL; - - tx_cmd->cmd.command = (CMD_FLEX | CmdTx); - - tx_cmd->pad = 0; - tx_cmd->size = 0; - tx_cmd_tbd->pad = 0; - tx_cmd_tbd->size = (EOF | length); - - tx_cmd_tbd->pa_data = va_to_pa (skb->data); - tx_cmd_tbd->skb = skb; - - if (i596_debug & LOG_SRCDST) - print_eth (skb->data); - - i596_add_cmd (dev, (struct i596_cmd *) tx_cmd); - - dev->stats.tx_packets++; - } - - return NETDEV_TX_OK; -} - -static void -i596_tx_timeout (struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Transmitter timeout, serious problems. */ - printk(KERN_WARNING "%s: transmit timed out, status resetting.\n", dev->name); - dev->stats.tx_errors++; - - /* Try to restart the adaptor */ - if (lp->last_restart == dev->stats.tx_packets) { - printk ("Resetting board.\n"); - - /* Shutdown and restart */ - i596_reset (dev, lp, ioaddr); - } else { - /* Issue a channel attention signal */ - printk ("Kicking board.\n"); - lp->scb.command = (CUC_START | RX_START); - CA(); - lp->last_restart = dev->stats.tx_packets; - } - netif_wake_queue(dev); -} - -static void print_eth(char *add) -{ - int i; - - printk ("Dest "); - for (i = 0; i < 6; i++) - printk(" %2.2X", (unsigned char) add[i]); - printk ("\n"); - - printk ("Source"); - for (i = 0; i < 6; i++) - printk(" %2.2X", (unsigned char) add[i+6]); - printk ("\n"); - - printk ("type %2.2X%2.2X\n", - (unsigned char) add[12], (unsigned char) add[13]); -} - -static const struct net_device_ops i596_netdev_ops = { - .ndo_open = i596_open, - .ndo_stop = i596_close, - .ndo_start_xmit = i596_start_xmit, - .ndo_set_rx_mode = set_multicast_list, - .ndo_tx_timeout = i596_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init lp486e_probe(struct net_device *dev) { - struct i596_private *lp; - unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 }; - unsigned char *bios; - int i, j; - int ret = -ENOMEM; - static int probed; - - if (probed) - return -ENODEV; - probed++; - - if (!request_region(IOADDR, LP486E_TOTAL_SIZE, DRV_NAME)) { - printk(KERN_ERR "lp486e: IO address 0x%x in use\n", IOADDR); - return -EBUSY; - } - - lp = netdev_priv(dev); - spin_lock_init(&lp->cmd_lock); - - /* - * Do we really have this thing? - */ - if (i596_scp_setup(dev)) { - ret = -ENODEV; - goto err_out_kfree; - } - - dev->base_addr = IOADDR; - dev->irq = IRQ; - - - /* - * How do we find the ethernet address? I don't know. - * One possibility is to look at the EISA configuration area - * [0xe8000-0xe9fff]. This contains the ethernet address - * but not at a fixed address - things depend on setup options. - * - * If we find no address, or the wrong address, use - * ifconfig eth0 hw ether a1:a2:a3:a4:a5:a6 - * with the value found in the BIOS setup. - */ - bios = bus_to_virt(0xe8000); - for (j = 0; j < 0x2000; j++) { - if (bios[j] == 0 && bios[j+1] == 0xaa && bios[j+2] == 0) { - printk("%s: maybe address at BIOS 0x%x:", - dev->name, 0xe8000+j); - for (i = 0; i < 6; i++) { - eth_addr[i] = bios[i+j]; - printk(" %2.2X", eth_addr[i]); - } - printk("\n"); - } - } - - printk("%s: lp486e 82596 at %#3lx, IRQ %d,", - dev->name, dev->base_addr, dev->irq); - for (i = 0; i < 6; i++) - printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]); - printk("\n"); - - /* The LP486E-specific entries in the device structure. */ - dev->netdev_ops = &i596_netdev_ops; - dev->watchdog_timeo = 5*HZ; - -#if 0 - /* selftest reports 0x320925ae - don't know what that means */ - i596_port_do(dev, PORT_SELFTEST, "selftest"); - i596_port_do(dev, PORT_DUMP, "dump"); -#endif - return 0; - -err_out_kfree: - release_region(IOADDR, LP486E_TOTAL_SIZE); - return ret; -} - -static inline void -i596_handle_CU_completion(struct net_device *dev, - struct i596_private *lp, - unsigned short status, - unsigned short *ack_cmdp) { - struct i596_cmd *cmd; - int frames_out = 0; - int commands_done = 0; - int cmd_val; - unsigned long flags; - - spin_lock_irqsave(&lp->cmd_lock, flags); - cmd = lp->cmd_head; - - while (lp->cmd_head && (lp->cmd_head->status & CMD_STAT_C)) { - cmd = lp->cmd_head; - - lp->cmd_head = pa_to_va(lp->cmd_head->pa_next); - lp->cmd_backlog--; - - commands_done++; - cmd_val = cmd->command & 0x7; -#if 0 - printk("finished CU %s command (%d)\n", - CUcmdnames[cmd_val], cmd_val); -#endif - switch (cmd_val) { - case CmdTx: - { - struct tx_cmd *tx_cmd; - struct i596_tbd *tx_cmd_tbd; - - tx_cmd = (struct tx_cmd *) cmd; - tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd); - - frames_out++; - if (cmd->status & CMD_STAT_OK) { - if (i596_debug) - print_eth(pa_to_va(tx_cmd_tbd->pa_data)); - } else { - dev->stats.tx_errors++; - if (i596_debug) - printk("transmission failure:%04x\n", - cmd->status); - if (cmd->status & 0x0020) - dev->stats.collisions++; - if (!(cmd->status & 0x0040)) - dev->stats.tx_heartbeat_errors++; - if (cmd->status & 0x0400) - dev->stats.tx_carrier_errors++; - if (cmd->status & 0x0800) - dev->stats.collisions++; - if (cmd->status & 0x1000) - dev->stats.tx_aborted_errors++; - } - dev_kfree_skb_irq(tx_cmd_tbd->skb); - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)tx_cmd); - netif_wake_queue(dev); - break; - } - - case CmdMulticastList: - cmd->pa_next = I596_NULL; - kfree((unsigned char *)cmd); - break; - - case CmdTDR: - { - unsigned long status = *((unsigned long *) (cmd + 1)); - if (status & 0x8000) { - if (i596_debug) - printk("%s: link ok.\n", dev->name); - } else { - if (status & 0x4000) - printk("%s: Transceiver problem.\n", - dev->name); - if (status & 0x2000) - printk("%s: Termination problem.\n", - dev->name); - if (status & 0x1000) - printk("%s: Short circuit.\n", - dev->name); - printk("%s: Time %ld.\n", - dev->name, status & 0x07ff); - } - } - default: - cmd->pa_next = I596_NULL; - lp->last_cmd = jiffies; - - } - barrier(); - } - - cmd = lp->cmd_head; - while (cmd && (cmd != lp->cmd_tail)) { - cmd->command &= 0x1fff; - cmd = pa_to_va(cmd->pa_next); - barrier(); - } - - if (lp->cmd_head) - *ack_cmdp |= CUC_START; - lp->scb.pa_cmd = va_to_pa(lp->cmd_head); - spin_unlock_irqrestore(&lp->cmd_lock, flags); -} - -static irqreturn_t -i596_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct i596_private *lp = netdev_priv(dev); - unsigned short status, ack_cmd = 0; - int frames_in = 0; - - /* - * The 82596 examines the command, performs the required action, - * and then clears the SCB command word. - */ - if (lp->scb.command && i596_timeout(dev, "interrupt", 40)) - ; - - /* - * The status word indicates the status of the 82596. - * It is modified only by the 82596. - * - * [So, we must not clear it. I find often status 0xffff, - * which is not one of the values allowed by the docs.] - */ - status = lp->scb.status; -#if 0 - if (i596_debug) { - printk("%s: i596 interrupt, ", dev->name); - i596_out_status(status); - } -#endif - /* Impossible, but it happens - perhaps when we get - a receive interrupt but scb.pa_rfd is I596_NULL. */ - if (status == 0xffff) { - printk("%s: i596_interrupt: got status 0xffff\n", dev->name); - goto out; - } - - ack_cmd = (status & STAT_ACK); - - if (status & (STAT_CX | STAT_CNA)) - i596_handle_CU_completion(dev, lp, status, &ack_cmd); - - if (status & (STAT_FR | STAT_RNR)) { - /* Restart the receive unit when it got inactive somehow */ - if ((status & STAT_RNR) && netif_running(dev)) - ack_cmd |= RX_START; - - if (status & STAT_FR) { - frames_in = i596_rx(dev); - if (!frames_in) - printk("receive frame reported, but no frames\n"); - } - } - - /* acknowledge the interrupt */ - /* - if ((lp->scb.pa_cmd != I596_NULL) && netif_running(dev)) - ack_cmd |= CUC_START; - */ - - if (lp->scb.command && i596_timeout(dev, "i596 interrupt", 100)) - ; - - lp->scb.command = ack_cmd; - - CLEAR_INT(); - CA(); - - out: - return IRQ_HANDLED; -} - -static int i596_close(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - - netif_stop_queue(dev); - - if (i596_debug) - printk("%s: Shutting down ethercard, status was %4.4x.\n", - dev->name, lp->scb.status); - - lp->scb.command = (CUC_ABORT | RX_ABORT); - CA(); - - i596_cleanup_cmd(dev); - - if (lp->scb.command && i596_timeout(dev, "i596_close", 200)) - ; - - free_irq(dev->irq, dev); - remove_rx_bufs(dev); - - return 0; -} - -/* -* Set or clear the multicast filter for this adaptor. -*/ - -static void set_multicast_list(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - struct i596_cmd *cmd; - - if (i596_debug > 1) - printk ("%s: set multicast list %d\n", - dev->name, netdev_mc_count(dev)); - - if (!netdev_mc_empty(dev)) { - struct netdev_hw_addr *ha; - char *cp; - cmd = kmalloc(sizeof(struct i596_cmd) + 2 + - netdev_mc_count(dev) * 6, GFP_ATOMIC); - if (cmd == NULL) { - printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name); - return; - } - cmd->command = CmdMulticastList; - *((unsigned short *) (cmd + 1)) = netdev_mc_count(dev) * 6; - cp = ((char *)(cmd + 1))+2; - netdev_for_each_mc_addr(ha, dev) { - memcpy(cp, ha->addr, 6); - cp += 6; - } - if (i596_debug & LOG_SRCDST) - print_eth (((char *)(cmd + 1)) + 2); - i596_add_cmd(dev, cmd); - } else { - if (lp->set_conf.pa_next != I596_NULL) { - return; - } - if (netdev_mc_empty(dev) && - !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - lp->i596_config[8] &= ~0x01; - } else { - lp->i596_config[8] |= 0x01; - } - - i596_add_cmd(dev, &lp->set_conf); - } -} - -MODULE_AUTHOR("Ard van Breemen "); -MODULE_DESCRIPTION("Intel Panther onboard i82596 driver"); -MODULE_LICENSE("GPL"); - -static struct net_device *dev_lp486e; -static int full_duplex; -static int options; -static int io = IOADDR; -static int irq = IRQ; - -module_param(debug, int, 0); -//module_param(max_interrupt_work, int, 0); -//module_param(reverse_probe, int, 0); -//module_param(rx_copybreak, int, 0); -module_param(options, int, 0); -module_param(full_duplex, int, 0); - -static int __init lp486e_init_module(void) { - int err; - struct net_device *dev = alloc_etherdev(sizeof(struct i596_private)); - if (!dev) - return -ENOMEM; - - dev->irq = irq; - dev->base_addr = io; - err = lp486e_probe(dev); - if (err) { - free_netdev(dev); - return err; - } - err = register_netdev(dev); - if (err) { - release_region(dev->base_addr, LP486E_TOTAL_SIZE); - free_netdev(dev); - return err; - } - dev_lp486e = dev; - full_duplex = 0; - options = 0; - return 0; -} - -static void __exit lp486e_cleanup_module(void) { - unregister_netdev(dev_lp486e); - release_region(dev_lp486e->base_addr, LP486E_TOTAL_SIZE); - free_netdev(dev_lp486e); -} - -module_init(lp486e_init_module); -module_exit(lp486e_cleanup_module); -- cgit v0.10.2 From de8270ff4642f78ff62e9bae20e6ebf39677880c Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 9 Jan 2013 20:25:05 -0500 Subject: drivers/net: delete old 8bit ISA 3c501 driver. It was amusing that linux was able to make use of this 1980's technology on machines long past its intended lifespan, but it probably should go now. To set some context, the 3c501 was designed in the 1980's to be used on 8088 PC-XT 8bit ISA machines. It was built using a large number of discrete TTL components and truly looks like a relic of the ancient past before large scale integration was common. But from a functional point of view, the real issue, as stated in the (also obsolete) Ethernet-HowTo, is that "...the 3c501 can only do one thing at a time -- while you are removing one packet from the single-packet buffer it cannot receive another packet, nor can it receive a packet while loading a transmit packet." You know things are not good when the Kconfig help text suggests you make a cron job doing a ping every minute. Hardware that old and crippled is simply not going to be used by anyone in a time where 10 year old 100Mbit PCI cards (that are still functional) are largely give-away items. Cc: Alan Cox Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index c6e5194..64cd86e 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -51,7 +51,6 @@ extern struct net_device *fmv18x_probe(int unit); extern struct net_device *eth16i_probe(int unit); extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); -extern struct net_device *el1_probe(int unit); extern struct net_device *el16_probe(int unit); extern struct net_device *elplus_probe(int unit); extern struct net_device *e2100_probe(int unit); @@ -168,9 +167,6 @@ static struct devprobe2 isa_probes[] __initdata = { #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ {i82596_probe, 0}, #endif -#ifdef CONFIG_EL1 /* 3c501 */ - {el1_probe, 0}, -#endif #ifdef CONFIG_EL16 /* 3c507 */ {el16_probe, 0}, #endif diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c deleted file mode 100644 index 9abd9a7..0000000 --- a/drivers/net/ethernet/3com/3c501.c +++ /dev/null @@ -1,897 +0,0 @@ -/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */ -/* - Written 1992,1993,1994 Donald Becker - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - This is a device driver for the 3Com Etherlink 3c501. - Do not purchase this card, even as a joke. It's performance is horrible, - and it breaks in many ways. - - The original author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Fixed (again!) the missing interrupt locking on TX/RX shifting. - Alan Cox - - Removed calls to init_etherdev since they are no longer needed, and - cleaned up modularization just a bit. The driver still allows only - the default address for cards when loaded as a module, but that's - really less braindead than anyone using a 3c501 board. :) - 19950208 (invid@msen.com) - - Added traps for interrupts hitting the window as we clear and TX load - the board. Now getting 150K/second FTP with a 3c501 card. Still playing - with a TX-TX optimisation to see if we can touch 180-200K/second as seems - theoretically maximum. - 19950402 Alan Cox - - Cleaned up for 2.3.x because we broke SMP now. - 20000208 Alan Cox - - Check up pass for 2.5. Nothing significant changed - 20021009 Alan Cox - - Fixed zero fill corner case - 20030104 Alan Cox - - - For the avoidance of doubt the "preferred form" of this code is one which - is in an open non patent encumbered format. Where cryptographic key signing - forms part of the process of creating an executable the information - including keys needed to generate an equivalently functional executable - are deemed to be part of the source code. - -*/ - - -/** - * DOC: 3c501 Card Notes - * - * Some notes on this thing if you have to hack it. [Alan] - * - * Some documentation is available from 3Com. Due to the boards age - * standard responses when you ask for this will range from 'be serious' - * to 'give it to a museum'. The documentation is incomplete and mostly - * of historical interest anyway. - * - * The basic system is a single buffer which can be used to receive or - * transmit a packet. A third command mode exists when you are setting - * things up. - * - * If it's transmitting it's not receiving and vice versa. In fact the - * time to get the board back into useful state after an operation is - * quite large. - * - * The driver works by keeping the board in receive mode waiting for a - * packet to arrive. When one arrives it is copied out of the buffer - * and delivered to the kernel. The card is reloaded and off we go. - * - * When transmitting lp->txing is set and the card is reset (from - * receive mode) [possibly losing a packet just received] to command - * mode. A packet is loaded and transmit mode triggered. The interrupt - * handler runs different code for transmit interrupts and can handle - * returning to receive mode or retransmissions (yes you have to help - * out with those too). - * - * DOC: Problems - * - * There are a wide variety of undocumented error returns from the card - * and you basically have to kick the board and pray if they turn up. Most - * only occur under extreme load or if you do something the board doesn't - * like (eg touching a register at the wrong time). - * - * The driver is less efficient than it could be. It switches through - * receive mode even if more transmits are queued. If this worries you buy - * a real Ethernet card. - * - * The combination of slow receive restart and no real multicast - * filter makes the board unusable with a kernel compiled for IP - * multicasting in a real multicast environment. That's down to the board, - * but even with no multicast programs running a multicast IP kernel is - * in group 224.0.0.1 and you will therefore be listening to all multicasts. - * One nv conference running over that Ethernet and you can give up. - * - */ - -#define DRV_NAME "3c501" -#define DRV_VERSION "2002/10/09" - - -static const char version[] = - DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@lxorguk.ukuu.org.uk).\n"; - -/* - * Braindamage remaining: - * The 3c501 board. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -#include "3c501.h" - -/* - * The boilerplate probe code. - */ - -static int io = 0x280; -static int irq = 5; -static int mem_start; - -/** - * el1_probe - probe for a 3c501 - * @dev: The device structure passed in to probe. - * - * This can be called from two places. The network layer will probe using - * a device structure passed in with the probe information completed. For a - * modular driver we use #init_module to fill in our own structure and probe - * for it. - * - * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to - * probe and failing to find anything. - */ - -struct net_device * __init el1_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - static const unsigned ports[] = { 0x280, 0x300, 0}; - const unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - mem_start = dev->mem_start & 7; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = el1_probe1(dev, io); - } else if (io != 0) { - err = -ENXIO; /* Don't probe at all. */ - } else { - for (port = ports; *port && el1_probe1(dev, *port); port++) - ; - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, EL1_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops el_netdev_ops = { - .ndo_open = el_open, - .ndo_stop = el1_close, - .ndo_start_xmit = el_start_xmit, - .ndo_tx_timeout = el_timeout, - .ndo_set_rx_mode = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/** - * el1_probe1: - * @dev: The device structure to use - * @ioaddr: An I/O address to probe at. - * - * The actual probe. This is iterated over by #el1_probe in order to - * check all the applicable device locations. - * - * Returns 0 for a success, in which case the device is activated, - * EAGAIN if the IRQ is in use by another driver, and ENODEV if the - * board cannot be found. - */ - -static int __init el1_probe1(struct net_device *dev, int ioaddr) -{ - struct net_local *lp; - const char *mname; /* Vendor name */ - unsigned char station_addr[6]; - int autoirq = 0; - int i; - - /* - * Reserve I/O resource for exclusive use by this driver - */ - - if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME)) - return -ENODEV; - - /* - * Read the station address PROM data from the special port. - */ - - for (i = 0; i < 6; i++) { - outw(i, ioaddr + EL1_DATAPTR); - station_addr[i] = inb(ioaddr + EL1_SAPROM); - } - /* - * Check the first three octets of the S.A. for 3Com's prefix, or - * for the Sager NP943 prefix. - */ - - if (station_addr[0] == 0x02 && station_addr[1] == 0x60 && - station_addr[2] == 0x8c) - mname = "3c501"; - else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 && - station_addr[2] == 0xC8) - mname = "NP943"; - else { - release_region(ioaddr, EL1_IO_EXTENT); - return -ENODEV; - } - - /* - * We auto-IRQ by shutting off the interrupt line and letting it - * float high. - */ - - dev->irq = irq; - - if (dev->irq < 2) { - unsigned long irq_mask; - - irq_mask = probe_irq_on(); - inb(RX_STATUS); /* Clear pending interrupts. */ - inb(TX_STATUS); - outb(AX_LOOP + 1, AX_CMD); - - outb(0x00, AX_CMD); - - mdelay(20); - autoirq = probe_irq_off(irq_mask); - - if (autoirq == 0) { - pr_warning("%s probe at %#x failed to detect IRQ line.\n", - mname, ioaddr); - release_region(ioaddr, EL1_IO_EXTENT); - return -EAGAIN; - } - } - - outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */ - dev->base_addr = ioaddr; - memcpy(dev->dev_addr, station_addr, ETH_ALEN); - - if (mem_start & 0xf) - el_debug = mem_start & 0x7; - if (autoirq) - dev->irq = autoirq; - - pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n", - dev->name, mname, dev->base_addr, - autoirq ? "auto":"assigned ", dev->irq); - -#ifdef CONFIG_IP_MULTICAST - pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n"); -#endif - - if (el_debug) - pr_debug("%s", version); - - lp = netdev_priv(dev); - memset(lp, 0, sizeof(struct net_local)); - spin_lock_init(&lp->lock); - - /* - * The EL1-specific entries in the device structure. - */ - - dev->netdev_ops = &el_netdev_ops; - dev->watchdog_timeo = HZ; - dev->ethtool_ops = &netdev_ethtool_ops; - return 0; -} - -/** - * el1_open: - * @dev: device that is being opened - * - * When an ifconfig is issued which changes the device flags to include - * IFF_UP this function is called. It is only called when the change - * occurs, not when the interface remains up. #el1_close will be called - * when it goes down. - * - * Returns 0 for a successful open, or -EAGAIN if someone has run off - * with our interrupt line. - */ - -static int el_open(struct net_device *dev) -{ - int retval; - int ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - unsigned long flags; - - if (el_debug > 2) - pr_debug("%s: Doing el_open()...\n", dev->name); - - retval = request_irq(dev->irq, el_interrupt, 0, dev->name, dev); - if (retval) - return retval; - - spin_lock_irqsave(&lp->lock, flags); - el_reset(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - lp->txing = 0; /* Board in RX mode */ - outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ - netif_start_queue(dev); - return 0; -} - -/** - * el_timeout: - * @dev: The 3c501 card that has timed out - * - * Attempt to restart the board. This is basically a mixture of extreme - * violence and prayer - * - */ - -static void el_timeout(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if (el_debug) - pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n", - dev->name, inb(TX_STATUS), - inb(AX_STATUS), inb(RX_STATUS)); - dev->stats.tx_errors++; - outb(TX_NORM, TX_CMD); - outb(RX_NORM, RX_CMD); - outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */ - outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ - lp->txing = 0; /* Ripped back in to RX */ - netif_wake_queue(dev); -} - - -/** - * el_start_xmit: - * @skb: The packet that is queued to be sent - * @dev: The 3c501 card we want to throw it down - * - * Attempt to send a packet to a 3c501 card. There are some interesting - * catches here because the 3c501 is an extremely old and therefore - * stupid piece of technology. - * - * If we are handling an interrupt on the other CPU we cannot load a packet - * as we may still be attempting to retrieve the last RX packet buffer. - * - * When a transmit times out we dump the card into control mode and just - * start again. It happens enough that it isn't worth logging. - * - * We avoid holding the spin locks when doing the packet load to the board. - * The device is very slow, and its DMA mode is even slower. If we held the - * lock while loading 1500 bytes onto the controller we would drop a lot of - * serial port characters. This requires we do extra locking, but we have - * no real choice. - */ - -static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - - /* - * Avoid incoming interrupts between us flipping txing and flipping - * mode as the driver assumes txing is a faithful indicator of card - * state - */ - - spin_lock_irqsave(&lp->lock, flags); - - /* - * Avoid timer-based retransmission conflicts. - */ - - netif_stop_queue(dev); - - do { - int len = skb->len; - int pad = 0; - int gp_start; - unsigned char *buf = skb->data; - - if (len < ETH_ZLEN) - pad = ETH_ZLEN - len; - - gp_start = 0x800 - (len + pad); - - lp->tx_pkt_start = gp_start; - lp->collisions = 0; - - dev->stats.tx_bytes += skb->len; - - /* - * Command mode with status cleared should [in theory] - * mean no more interrupts can be pending on the card. - */ - - outb_p(AX_SYS, AX_CMD); - inb_p(RX_STATUS); - inb_p(TX_STATUS); - - lp->loading = 1; - lp->txing = 1; - - /* - * Turn interrupts back on while we spend a pleasant - * afternoon loading bytes into the board - */ - - spin_unlock_irqrestore(&lp->lock, flags); - - /* Set rx packet area to 0. */ - outw(0x00, RX_BUF_CLR); - /* aim - packet will be loaded into buffer start */ - outw(gp_start, GP_LOW); - /* load buffer (usual thing each byte increments the pointer) */ - outsb(DATAPORT, buf, len); - if (pad) { - while (pad--) /* Zero fill buffer tail */ - outb(0, DATAPORT); - } - /* the board reuses the same register */ - outw(gp_start, GP_LOW); - - if (lp->loading != 2) { - /* fire ... Trigger xmit. */ - outb(AX_XMIT, AX_CMD); - lp->loading = 0; - if (el_debug > 2) - pr_debug(" queued xmit.\n"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - /* A receive upset our load, despite our best efforts */ - if (el_debug > 2) - pr_debug("%s: burped during tx load.\n", dev->name); - spin_lock_irqsave(&lp->lock, flags); - } while (1); -} - -/** - * el_interrupt: - * @irq: Interrupt number - * @dev_id: The 3c501 that burped - * - * Handle the ether interface interrupts. The 3c501 needs a lot more - * hand holding than most cards. In particular we get a transmit interrupt - * with a collision error because the board firmware isn't capable of rewinding - * its own transmit buffer pointers. It can however count to 16 for us. - * - * On the receive side the card is also very dumb. It has no buffering to - * speak of. We simply pull the packet out of its PIO buffer (which is slow) - * and queue it for the kernel. Then we reset the card for the next packet. - * - * We sometimes get surprise interrupts late both because the SMP IRQ delivery - * is message passing and because the card sometimes seems to deliver late. I - * think if it is part way through a receive and the mode is changed it carries - * on receiving and sends us an interrupt. We have to band aid all these cases - * to get a sensible 150kBytes/second performance. Even then you want a small - * TCP window. - */ - -static irqreturn_t el_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr; - int axsr; /* Aux. status reg. */ - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - spin_lock(&lp->lock); - - /* - * What happened ? - */ - - axsr = inb(AX_STATUS); - - /* - * Log it - */ - - if (el_debug > 3) - pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr); - - if (lp->loading == 1 && !lp->txing) - pr_warning("%s: Inconsistent state loading while not in tx\n", - dev->name); - - if (lp->txing) { - /* - * Board in transmit mode. May be loading. If we are - * loading we shouldn't have got this. - */ - int txsr = inb(TX_STATUS); - - if (lp->loading == 1) { - if (el_debug > 2) - pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n", - dev->name, txsr, inw(GP_LOW), inw(RX_LOW)); - - /* Force a reload */ - lp->loading = 2; - spin_unlock(&lp->lock); - goto out; - } - if (el_debug > 6) - pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name, - txsr, inw(GP_LOW), inw(RX_LOW)); - - if ((axsr & 0x80) && (txsr & TX_READY) == 0) { - /* - * FIXME: is there a logic to whether to keep - * on trying or reset immediately ? - */ - if (el_debug > 1) - pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n", - dev->name, txsr, axsr, - inw(ioaddr + EL1_DATAPTR), - inw(ioaddr + EL1_RXPTR)); - lp->txing = 0; - netif_wake_queue(dev); - } else if (txsr & TX_16COLLISIONS) { - /* - * Timed out - */ - if (el_debug) - pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name); - outb(AX_SYS, AX_CMD); - lp->txing = 0; - dev->stats.tx_aborted_errors++; - netif_wake_queue(dev); - } else if (txsr & TX_COLLISION) { - /* - * Retrigger xmit. - */ - - if (el_debug > 6) - pr_debug("%s: retransmitting after a collision.\n", dev->name); - /* - * Poor little chip can't reset its own start - * pointer - */ - - outb(AX_SYS, AX_CMD); - outw(lp->tx_pkt_start, GP_LOW); - outb(AX_XMIT, AX_CMD); - dev->stats.collisions++; - spin_unlock(&lp->lock); - goto out; - } else { - /* - * It worked.. we will now fall through and receive - */ - dev->stats.tx_packets++; - if (el_debug > 6) - pr_debug("%s: Tx succeeded %s\n", dev->name, - (txsr & TX_RDY) ? "." : "but tx is busy!"); - /* - * This is safe the interrupt is atomic WRT itself. - */ - lp->txing = 0; - /* In case more to transmit */ - netif_wake_queue(dev); - } - } else { - /* - * In receive mode. - */ - - int rxsr = inb(RX_STATUS); - if (el_debug > 5) - pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n", - dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW)); - /* - * Just reading rx_status fixes most errors. - */ - if (rxsr & RX_MISSED) - dev->stats.rx_missed_errors++; - else if (rxsr & RX_RUNT) { - /* Handled to avoid board lock-up. */ - dev->stats.rx_length_errors++; - if (el_debug > 5) - pr_debug("%s: runt.\n", dev->name); - } else if (rxsr & RX_GOOD) { - /* - * Receive worked. - */ - el_receive(dev); - } else { - /* - * Nothing? Something is broken! - */ - if (el_debug > 2) - pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n", - dev->name, rxsr); - el_reset(dev); - } - } - - /* - * Move into receive mode - */ - - outb(AX_RX, AX_CMD); - outw(0x00, RX_BUF_CLR); - inb(RX_STATUS); /* Be certain that interrupts are cleared. */ - inb(TX_STATUS); - spin_unlock(&lp->lock); -out: - return IRQ_HANDLED; -} - - -/** - * el_receive: - * @dev: Device to pull the packets from - * - * We have a good packet. Well, not really "good", just mostly not broken. - * We must check everything to see if it is good. In particular we occasionally - * get wild packet sizes from the card. If the packet seems sane we PIO it - * off the card and queue it for the protocol layers. - */ - -static void el_receive(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int pkt_len; - struct sk_buff *skb; - - pkt_len = inw(RX_LOW); - - if (el_debug > 4) - pr_debug(" el_receive %d.\n", pkt_len); - - if (pkt_len < 60 || pkt_len > 1536) { - if (el_debug) - pr_debug("%s: bogus packet, length=%d\n", - dev->name, pkt_len); - dev->stats.rx_over_errors++; - return; - } - - /* - * Command mode so we can empty the buffer - */ - - outb(AX_SYS, AX_CMD); - skb = netdev_alloc_skb(dev, pkt_len + 2); - - /* - * Start of frame - */ - - outw(0x00, GP_LOW); - if (skb == NULL) { - pr_info("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return; - } else { - skb_reserve(skb, 2); /* Force 16 byte alignment */ - /* - * The read increments through the bytes. The interrupt - * handler will fix the pointer when it returns to - * receive mode. - */ - insb(DATAPORT, skb_put(skb, pkt_len), pkt_len); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } -} - -/** - * el_reset: Reset a 3c501 card - * @dev: The 3c501 card about to get zapped - * - * Even resetting a 3c501 isn't simple. When you activate reset it loses all - * its configuration. You must hold the lock when doing this. The function - * cannot take the lock itself as it is callable from the irq handler. - */ - -static void el_reset(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if (el_debug > 2) - pr_info("3c501 reset...\n"); - outb(AX_RESET, AX_CMD); /* Reset the chip */ - /* Aux control, irq and loopback enabled */ - outb(AX_LOOP, AX_CMD); - { - int i; - for (i = 0; i < 6; i++) /* Set the station address. */ - outb(dev->dev_addr[i], ioaddr + i); - } - - outw(0, RX_BUF_CLR); /* Set rx packet area to 0. */ - outb(TX_NORM, TX_CMD); /* tx irq on done, collision */ - outb(RX_NORM, RX_CMD); /* Set Rx commands. */ - inb(RX_STATUS); /* Clear status. */ - inb(TX_STATUS); - lp->txing = 0; -} - -/** - * el1_close: - * @dev: 3c501 card to shut down - * - * Close a 3c501 card. The IFF_UP flag has been cleared by the user via - * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued, - * and then disable the interrupts. Finally we reset the chip. The effects - * of the rest will be cleaned up by #el1_open. Always returns 0 indicating - * a success. - */ - -static int el1_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (el_debug > 2) - pr_info("%s: Shutting down Ethernet card at %#x.\n", - dev->name, ioaddr); - - netif_stop_queue(dev); - - /* - * Free and disable the IRQ. - */ - - free_irq(dev->irq, dev); - outb(AX_RESET, AX_CMD); /* Reset the chip */ - - return 0; -} - -/** - * set_multicast_list: - * @dev: The device to adjust - * - * Set or clear the multicast filter for this adaptor to use the best-effort - * filtering supported. The 3c501 supports only three modes of filtering. - * It always receives broadcasts and packets for itself. You can choose to - * optionally receive all packets, or all multicast packets on top of this. - */ - -static void set_multicast_list(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (dev->flags & IFF_PROMISC) { - outb(RX_PROM, RX_CMD); - inb(RX_STATUS); - } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { - /* Multicast or all multicast is the same */ - outb(RX_MULT, RX_CMD); - inb(RX_STATUS); /* Clear status. */ - } else { - outb(RX_NORM, RX_CMD); - inb(RX_STATUS); - } -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE - -static struct net_device *dev_3c501; - -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "EtherLink I/O base address"); -MODULE_PARM_DESC(irq, "EtherLink IRQ number"); - -/** - * init_module: - * - * When the driver is loaded as a module this function is called. We fake up - * a device structure with the base I/O and interrupt set as if it were being - * called from Space.c. This minimises the extra code that would otherwise - * be required. - * - * Returns 0 for success or -EIO if a card is not found. Returning an error - * here also causes the module to be unloaded - */ - -int __init init_module(void) -{ - dev_3c501 = el1_probe(-1); - if (IS_ERR(dev_3c501)) - return PTR_ERR(dev_3c501); - return 0; -} - -/** - * cleanup_module: - * - * The module is being unloaded. We unhook our network device from the system - * and then free up the resources we took when the card was found. - */ - -void __exit cleanup_module(void) -{ - struct net_device *dev = dev_3c501; - unregister_netdev(dev); - release_region(dev->base_addr, EL1_IO_EXTENT); - free_netdev(dev); -} - -#endif /* MODULE */ - -MODULE_AUTHOR("Donald Becker, Alan Cox"); -MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/net/ethernet/3com/3c501.h b/drivers/net/ethernet/3com/3c501.h deleted file mode 100644 index 183fd55..0000000 --- a/drivers/net/ethernet/3com/3c501.h +++ /dev/null @@ -1,91 +0,0 @@ - -/* - * Index to functions. - */ - -static int el1_probe1(struct net_device *dev, int ioaddr); -static int el_open(struct net_device *dev); -static void el_timeout(struct net_device *dev); -static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t el_interrupt(int irq, void *dev_id); -static void el_receive(struct net_device *dev); -static void el_reset(struct net_device *dev); -static int el1_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; - -#define EL1_IO_EXTENT 16 - -#ifndef EL_DEBUG -#define EL_DEBUG 0 /* use 0 for production, 1 for devel., >2 for debug */ -#endif /* Anything above 5 is wordy death! */ -#define debug el_debug -static int el_debug = EL_DEBUG; - -/* - * Board-specific info in netdev_priv(dev). - */ - -struct net_local -{ - int tx_pkt_start; /* The length of the current Tx packet. */ - int collisions; /* Tx collisions this packet */ - int loading; /* Spot buffer load collisions */ - int txing; /* True if card is in TX mode */ - spinlock_t lock; /* Serializing lock */ -}; - - -#define RX_STATUS (ioaddr + 0x06) -#define RX_CMD RX_STATUS -#define TX_STATUS (ioaddr + 0x07) -#define TX_CMD TX_STATUS -#define GP_LOW (ioaddr + 0x08) -#define GP_HIGH (ioaddr + 0x09) -#define RX_BUF_CLR (ioaddr + 0x0A) -#define RX_LOW (ioaddr + 0x0A) -#define RX_HIGH (ioaddr + 0x0B) -#define SAPROM (ioaddr + 0x0C) -#define AX_STATUS (ioaddr + 0x0E) -#define AX_CMD AX_STATUS -#define DATAPORT (ioaddr + 0x0F) -#define TX_RDY 0x08 /* In TX_STATUS */ - -#define EL1_DATAPTR 0x08 -#define EL1_RXPTR 0x0A -#define EL1_SAPROM 0x0C -#define EL1_DATAPORT 0x0f - -/* - * Writes to the ax command register. - */ - -#define AX_OFF 0x00 /* Irq off, buffer access on */ -#define AX_SYS 0x40 /* Load the buffer */ -#define AX_XMIT 0x44 /* Transmit a packet */ -#define AX_RX 0x48 /* Receive a packet */ -#define AX_LOOP 0x0C /* Loopback mode */ -#define AX_RESET 0x80 - -/* - * Normal receive mode written to RX_STATUS. We must intr on short packets - * to avoid bogus rx lockups. - */ - -#define RX_NORM 0xA8 /* 0x68 == all addrs, 0xA8 only to me. */ -#define RX_PROM 0x68 /* Senior Prom, uhmm promiscuous mode. */ -#define RX_MULT 0xE8 /* Accept multicast packets. */ -#define TX_NORM 0x0A /* Interrupt on everything that might hang the chip */ - -/* - * TX_STATUS register. - */ - -#define TX_COLLISION 0x02 -#define TX_16COLLISIONS 0x04 -#define TX_READY 0x08 - -#define RX_RUNT 0x08 -#define RX_MISSED 0x01 /* Missed a packet due to 3c501 braindamage. */ -#define RX_GOOD 0x30 /* Good packet 0x20, or simple overflow 0x10. */ - diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 8c417ed..1c71c76 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -18,20 +18,6 @@ config NET_VENDOR_3COM if NET_VENDOR_3COM -config EL1 - tristate "3c501 \"EtherLink\" support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . Also, consider buying a - new card, since the 3c501 is slow, broken, and obsolete: you will - have problems. Some people suggest to ping ("man ping") a nearby - machine every minute ("man cron") when using this card. - - To compile this driver as a module, choose M here. The module - will be called 3c501. - config EL3 tristate "3c509/3c579 \"EtherLink III\" support" depends on (ISA || EISA) diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile index 1e5382a..74046af 100644 --- a/drivers/net/ethernet/3com/Makefile +++ b/drivers/net/ethernet/3com/Makefile @@ -2,7 +2,6 @@ # Makefile for the 3Com Ethernet device drivers # -obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL3) += 3c509.o obj-$(CONFIG_3C515) += 3c515.o obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o -- cgit v0.10.2 From 168e06ae26dd327df347e70b7244218ff1766a1f Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 9 Jan 2013 20:30:26 -0500 Subject: drivers/net: delete old parallel port de600/de620 drivers The parallel port is largely replaced by USB, and even in the day where these drivers were current, the documented speed was less than 100kB/s. Let us not pretend that anyone cares about these drivers anymore, or worse - pretend that anyone is using them on a modern kernel. As a side bonus, this is the end of legacy parallel port ethernet, so we get to drop the whole chunk relating to that in the legacy Space.c file containing the non-PCI unified probe dispatch. Signed-off-by: Paul Gortmaker diff --git a/Documentation/networking/DLINK.txt b/Documentation/networking/DLINK.txt deleted file mode 100644 index 55d2443..0000000 --- a/Documentation/networking/DLINK.txt +++ /dev/null @@ -1,203 +0,0 @@ -Released 1994-06-13 - - - CONTENTS: - - 1. Introduction. - 2. License. - 3. Files in this release. - 4. Installation. - 5. Problems and tuning. - 6. Using the drivers with earlier releases. - 7. Acknowledgments. - - - 1. INTRODUCTION. - - This is a set of Ethernet drivers for the D-Link DE-600/DE-620 - pocket adapters, for the parallel port on a Linux based machine. - Some adapter "clones" will also work. Xircom is _not_ a clone... - These drivers _can_ be used as loadable modules, - and were developed for use on Linux 1.1.13 and above. - For use on Linux 1.0.X, or earlier releases, see below. - - I have used these drivers for NFS, ftp, telnet and X-clients on - remote machines. Transmissions with ftp seems to work as - good as can be expected (i.e. > 80k bytes/sec) from a - parallel port...:-) Receive speeds will be about 60-80% of this. - Depending on your machine, somewhat higher speeds can be achieved. - - All comments/fixes to Bjorn Ekwall (bj0rn@blox.se). - - - 2. LICENSE. - - This program is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more - details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA - 02139, USA. - - - 3. FILES IN THIS RELEASE. - - README.DLINK This file. - de600.c The Source (may it be with You :-) for the DE-600 - de620.c ditto for the DE-620 - de620.h Macros for de620.c - - If you are upgrading from the d-link tar release, there will - also be a "dlink-patches" file that will patch Linux 1.1.18: - linux/drivers/net/Makefile - linux/drivers/net/CONFIG - linux/drivers/net/MODULES - linux/drivers/net/Space.c - linux/config.in - Apply the patch by: - "cd /usr/src; patch -p0 < linux/drivers/net/dlink-patches" - The old source, "linux/drivers/net/d_link.c", can be removed. - - - 4. INSTALLATION. - - o Get the latest net binaries, according to current net.wisdom. - - o Read the NET-2 and Ethernet HOWTOs and modify your setup. - - o If your parallel port has a strange address or irq, - modify "linux/drivers/net/CONFIG" accordingly, or adjust - the parameters in the "tuning" section in the sources. - - If you are going to use the drivers as loadable modules, do _not_ - enable them while doing "make config", but instead make sure that - the drivers are included in "linux/drivers/net/MODULES". - - If you are _not_ going to use the driver(s) as loadable modules, - but instead have them included in the kernel, remember to enable - the drivers while doing "make config". - - o To include networking and DE600/DE620 support in your kernel: - # cd /linux - (as modules:) - # make config (answer yes on CONFIG_NET and CONFIG_INET) - (else included in the kernel:) - # make config (answer yes on CONFIG _NET, _INET and _DE600 or _DE620) - # make clean - # make zImage (or whatever magic you usually do) - - o I use lilo to boot multiple kernels, so that I at least - can have one working kernel :-). If you do too, append - these lines to /etc/lilo/config: - - image = /linux/zImage - label = newlinux - root = /dev/hda2 (or whatever YOU have...) - - # /etc/lilo/install - - o Do "sync" and reboot the new kernel with a D-Link - DE-600/DE-620 pocket adapter connected. - - o The adapter can be configured with ifconfig eth? - where the actual number is decided by the kernel - when the drivers are initialized. - - - 5. "PROBLEMS" AND TUNING, - - o If you see error messages from the driver, and if the traffic - stops on the adapter, try to do "ifconfig" and "route" once - more, just as in "rc.inet1". This should take care of most - problems, including effects from power loss, or adapters that - aren't connected to the printer port in some way or another. - You can somewhat change the behaviour by enabling/disabling - the macro SHUTDOWN_WHEN_LOST in the "tuning" section. - For the DE-600 there is another macro, CHECK_LOST_DE600, - that you might want to read about in the "tuning" section. - - o Some machines have trouble handling the parallel port and - the adapter at high speed. If you experience problems: - - DE-600: - - The adapter is not recognized at boot, i.e. an Ethernet - address of 00:80:c8:... is not shown, try to add another - "; SLOW_DOWN_IO" - at DE600_SLOW_DOWN in the "tuning" section. As a last resort, - uncomment: "#define REALLY_SLOW_IO" (see for hints). - - - You experience "timeout" messages: first try to add another - "; SLOW_DOWN_IO" - at DE600_SLOW_DOWN in the "tuning" section, _then_ try to - increase the value (original value: 5) at - "if (tickssofar < 5)" near line 422. - - DE-620: - - Your parallel port might be "sluggish". To cater for - this, there are the macros LOWSPEED and READ_DELAY/WRITE_DELAY - in the "tuning" section. Your first step should be to enable - LOWSPEED, and after that you can "tune" the XXX_DELAY values. - - o If the adapter _is_ recognized at boot but you get messages - about "Network Unreachable", then the problem is probably - _not_ with the driver. Check your net configuration instead - (ifconfig and route) in "rc.inet1". - - o There is some rudimentary support for debugging, look at - the source. Use "-DDE600_DEBUG=3" or "-DDE620_DEBUG=3" - when compiling, or include it in "linux/drivers/net/CONFIG". - IF YOU HAVE PROBLEMS YOU CAN'T SOLVE: PLEASE COMPILE THE DRIVER - WITH DEBUGGING ENABLED, AND SEND ME THE RESULTING OUTPUT! - - - 6. USING THE DRIVERS WITH EARLIER RELEASES. - - The later 1.1.X releases of the Linux kernel include some - changes in the networking layer (a.k.a. NET3). This affects - these drivers in a few places. The hints that follow are - _not_ tested by me, since I don't have the disk space to keep - all releases on-line. - Known needed changes to date: - - release patchfile: some patches will fail, but they should - be easy to apply "by hand", since they are trivial. - (Space.c: d_link_init() is now called de600_probe()) - - de600.c: change "mark_bh(NET_BH)" to "mark_bh(INET_BH)". - - de620.c: (maybe) change the code around "netif_rx(skb);" to be - similar to the code around "dev_rint(...)" in de600.c - - - 7. ACKNOWLEDGMENTS. - - These drivers wouldn't have been done without the base - (and support) from Ross Biro, and D-Link Systems Inc. - The driver relies upon GPL-ed source from D-Link Systems Inc. - and from Russel Nelson at Crynwr Software . - - Additional input also from: - Donald Becker , Alan Cox - and Fred N. van Kempen - - DE-600 alpha release primary victim^H^H^H^H^H^Htester: - - Erik Proper . - Good input also from several users, most notably - - Mark Burton . - - DE-620 alpha release victims^H^H^H^H^H^H^Htesters: - - J. Joshua Kopper - - Olav Kvittem - - Germano Caronni - - Jeremy Fitzhardinge - - - Happy hacking! - - Bjorn Ekwall == bj0rn@blox.se diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 64cd86e..d487127 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -73,9 +73,6 @@ extern struct net_device *mac89x0_probe(int unit); extern struct net_device *cops_probe(int unit); extern struct net_device *ltpc_probe(void); -/* Detachable devices ("pocket adaptors") */ -extern struct net_device *de620_probe(int unit); - /* Fibre Channel adapters */ extern int iph5526_probe(struct net_device *dev); @@ -185,13 +182,6 @@ static struct devprobe2 isa_probes[] __initdata = { {NULL, 0}, }; -static struct devprobe2 parport_probes[] __initdata = { -#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */ - {de620_probe, 0}, -#endif - {NULL, 0}, -}; - static struct devprobe2 m68k_probes[] __initdata = { #ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */ {atarilance_probe, 0}, @@ -230,8 +220,7 @@ static void __init ethif_probe2(int unit) return; (void)( probe_list2(unit, m68k_probes, base_addr == 0) && - probe_list2(unit, isa_probes, base_addr == 0) && - probe_list2(unit, parport_probes, base_addr == 0)); + probe_list2(unit, isa_probes, base_addr == 0)); } /* Statically configured drivers -- order matters here. */ diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig index b5afe21..ee26ce7 100644 --- a/drivers/net/ethernet/dlink/Kconfig +++ b/drivers/net/ethernet/dlink/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_DLINK bool "D-Link devices" default y - depends on PCI || PARPORT + depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -18,36 +18,6 @@ config NET_VENDOR_DLINK if NET_VENDOR_DLINK -config DE600 - tristate "D-Link DE600 pocket adapter support" - depends on PARPORT - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read as well as the - Ethernet-HOWTO, available from - , if you want to use - this. It is possible to have several devices share a single parallel - port and it is safe to compile the corresponding drivers into the - kernel. - - To compile this driver as a module, choose M here: the module - will be called de600. - -config DE620 - tristate "D-Link DE620 pocket adapter support" - depends on PARPORT - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read as well as the - Ethernet-HOWTO, available from - , if you want to use - this. It is possible to have several devices share a single parallel - port and it is safe to compile the corresponding drivers into the - kernel. - - To compile this driver as a module, choose M here: the module - will be called de620. - config DL2K tristate "DL2000/TC902x-based Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile index c705eaa..40085f6 100644 --- a/drivers/net/ethernet/dlink/Makefile +++ b/drivers/net/ethernet/dlink/Makefile @@ -2,7 +2,5 @@ # Makefile for the D-Link network device drivers. # -obj-$(CONFIG_DE600) += de600.o -obj-$(CONFIG_DE620) += de620.o obj-$(CONFIG_DL2K) += dl2k.o obj-$(CONFIG_SUNDANCE) += sundance.o diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c deleted file mode 100644 index 414f0ee..0000000 --- a/drivers/net/ethernet/dlink/de600.c +++ /dev/null @@ -1,529 +0,0 @@ -static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n"; -/* - * de600.c - * - * Linux driver for the D-Link DE-600 Ethernet pocket adapter. - * - * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall - * The Author may be reached as bj0rn@blox.se - * - * Based on adapter information gathered from DE600.ASM by D-Link Inc., - * as included on disk C in the v.2.11 of PC/TCP from FTP Software. - * For DE600.asm: - * Portions (C) Copyright 1990 D-Link, Inc. - * Copyright, 1988-1992, Russell Nelson, Crynwr Software - * - * Adapted to the sample network driver core for linux, - * written by: Donald Becker - * (Now at ) - * - **************************************************************/ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - **************************************************************/ - -/* Add more time here if your adapter won't work OK: */ -#define DE600_SLOW_DOWN udelay(delay_time) - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "de600.h" - -static bool check_lost = true; -module_param(check_lost, bool, 0); -MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600"); - -static unsigned int delay_time = 10; -module_param(delay_time, int, 0); -MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds"); - - -/* - * D-Link driver variables: - */ - -static volatile int rx_page; - -#define TX_PAGES 2 -static volatile int tx_fifo[TX_PAGES]; -static volatile int tx_fifo_in; -static volatile int tx_fifo_out; -static volatile int free_tx_pages = TX_PAGES; -static int was_down; -static DEFINE_SPINLOCK(de600_lock); - -static inline u8 de600_read_status(struct net_device *dev) -{ - u8 status; - - outb_p(STATUS, DATA_PORT); - status = inb(STATUS_PORT); - outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT); - - return status; -} - -static inline u8 de600_read_byte(unsigned char type, struct net_device *dev) -{ - /* dev used by macros */ - u8 lo; - outb_p((type), DATA_PORT); - lo = ((unsigned char)inb(STATUS_PORT)) >> 4; - outb_p((type) | HI_NIBBLE, DATA_PORT); - return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * after booting when 'ifconfig name> $IP_ADDR' is run (in rc.inet1). - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - */ - -static int de600_open(struct net_device *dev) -{ - unsigned long flags; - int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev); - if (ret) { - printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ); - return ret; - } - spin_lock_irqsave(&de600_lock, flags); - ret = adapter_init(dev); - spin_unlock_irqrestore(&de600_lock, flags); - return ret; -} - -/* - * The inverse routine to de600_open(). - */ - -static int de600_close(struct net_device *dev) -{ - select_nic(); - rx_page = 0; - de600_put_command(RESET); - de600_put_command(STOP_RESET); - de600_put_command(0); - select_prn(); - free_irq(DE600_IRQ, dev); - return 0; -} - -static inline void trigger_interrupt(struct net_device *dev) -{ - de600_put_command(FLIP_IRQ); - select_prn(); - DE600_SLOW_DOWN; - select_nic(); - de600_put_command(0); -} - -/* - * Copy a buffer to the adapter transmit page memory. - * Start sending. - */ - -static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int transmit_from; - int len; - int tickssofar; - u8 *buffer = skb->data; - int i; - - if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */ - tickssofar = jiffies - dev_trans_start(dev); - if (tickssofar < HZ/20) - return NETDEV_TX_BUSY; - /* else */ - printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem"); - /* Restart the adapter. */ - spin_lock_irqsave(&de600_lock, flags); - if (adapter_init(dev)) { - spin_unlock_irqrestore(&de600_lock, flags); - return NETDEV_TX_BUSY; - } - spin_unlock_irqrestore(&de600_lock, flags); - } - - /* Start real output */ - pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages); - - if ((len = skb->len) < RUNT) - len = RUNT; - - spin_lock_irqsave(&de600_lock, flags); - select_nic(); - tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len; - tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */ - - if(check_lost) - { - /* This costs about 40 instructions per packet... */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - de600_read_byte(READ_DATA, dev); - if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) { - if (adapter_init(dev)) { - spin_unlock_irqrestore(&de600_lock, flags); - return NETDEV_TX_BUSY; - } - } - } - - de600_setup_address(transmit_from, RW_ADDR); - for (i = 0; i < skb->len ; ++i, ++buffer) - de600_put_byte(*buffer); - for (; i < len; ++i) - de600_put_byte(0); - - if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */ - dev->trans_start = jiffies; - netif_start_queue(dev); /* allow more packets into adapter */ - /* Send page and generate a faked interrupt */ - de600_setup_address(transmit_from, TX_ADDR); - de600_put_command(TX_ENABLE); - } - else { - if (free_tx_pages) - netif_start_queue(dev); - else - netif_stop_queue(dev); - select_prn(); - } - spin_unlock_irqrestore(&de600_lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* - * The typical workload of the driver: - * Handle the network interface interrupts. - */ - -static irqreturn_t de600_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - u8 irq_status; - int retrig = 0; - int boguscount = 0; - - spin_lock(&de600_lock); - - select_nic(); - irq_status = de600_read_status(dev); - - do { - pr_debug("de600_interrupt (%02X)\n", irq_status); - - if (irq_status & RX_GOOD) - de600_rx_intr(dev); - else if (!(irq_status & RX_BUSY)) - de600_put_command(RX_ENABLE); - - /* Any transmission in progress? */ - if (free_tx_pages < TX_PAGES) - retrig = de600_tx_intr(dev, irq_status); - else - retrig = 0; - - irq_status = de600_read_status(dev); - } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) ); - /* - * Yeah, it _looks_ like busy waiting, smells like busy waiting - * and I know it's not PC, but please, it will only occur once - * in a while and then only for a loop or so (< 1ms for sure!) - */ - - /* Enable adapter interrupts */ - select_prn(); - if (retrig) - trigger_interrupt(dev); - spin_unlock(&de600_lock); - return IRQ_HANDLED; -} - -static int de600_tx_intr(struct net_device *dev, int irq_status) -{ - /* - * Returns 1 if tx still not done - */ - - /* Check if current transmission is done yet */ - if (irq_status & TX_BUSY) - return 1; /* tx not done, try again */ - - /* else */ - /* If last transmission OK then bump fifo index */ - if (!(irq_status & TX_FAILED16)) { - tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES; - ++free_tx_pages; - dev->stats.tx_packets++; - netif_wake_queue(dev); - } - - /* More to send, or resend last packet? */ - if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) { - dev->trans_start = jiffies; - de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR); - de600_put_command(TX_ENABLE); - return 1; - } - /* else */ - - return 0; -} - -/* - * We have a good packet, get it out of the adapter. - */ -static void de600_rx_intr(struct net_device *dev) -{ - struct sk_buff *skb; - int i; - int read_from; - int size; - unsigned char *buffer; - - /* Get size of received packet */ - size = de600_read_byte(RX_LEN, dev); /* low byte */ - size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */ - size -= 4; /* Ignore trailing 4 CRC-bytes */ - - /* Tell adapter where to store next incoming packet, enable receiver */ - read_from = rx_page_adr(); - next_rx_page(); - de600_put_command(RX_ENABLE); - - if ((size < 32) || (size > 1535)) { - printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size); - if (size > 10000) - adapter_init(dev); - return; - } - - skb = netdev_alloc_skb(dev, size + 2); - if (skb == NULL) { - printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); - return; - } - /* else */ - - skb_reserve(skb,2); /* Align */ - - /* 'skb->data' points to the start of sk_buff data area. */ - buffer = skb_put(skb,size); - - /* copy the packet into the buffer */ - de600_setup_address(read_from, RW_ADDR); - for (i = size; i > 0; --i, ++buffer) - *buffer = de600_read_byte(READ_DATA, dev); - - skb->protocol=eth_type_trans(skb,dev); - - netif_rx(skb); - - /* update stats */ - dev->stats.rx_packets++; /* count all receives */ - dev->stats.rx_bytes += size; /* count all received bytes */ - - /* - * If any worth-while packets have been received, netif_rx() - * will work on them when we get to the tasklets. - */ -} - -static const struct net_device_ops de600_netdev_ops = { - .ndo_open = de600_open, - .ndo_stop = de600_close, - .ndo_start_xmit = de600_start_xmit, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - - -static struct net_device * __init de600_probe(void) -{ - int i; - struct net_device *dev; - int err; - - dev = alloc_etherdev(0); - if (!dev) - return ERR_PTR(-ENOMEM); - - - if (!request_region(DE600_IO, 3, "de600")) { - printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO); - err = -EBUSY; - goto out; - } - - printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name); - /* Alpha testers must have the version number to report bugs. */ - pr_debug("%s", version); - - /* probe for adapter */ - err = -ENODEV; - rx_page = 0; - select_nic(); - (void)de600_read_status(dev); - de600_put_command(RESET); - de600_put_command(STOP_RESET); - if (de600_read_status(dev) & 0xf0) { - printk(": not at I/O %#3x.\n", DATA_PORT); - goto out1; - } - - /* - * Maybe we found one, - * have to check if it is a D-Link DE-600 adapter... - */ - - /* Get the adapter ethernet address from the ROM */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = de600_read_byte(READ_DATA, dev); - dev->broadcast[i] = 0xff; - } - - /* Check magic code */ - if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) { - /* OK, install real address */ - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x80; - dev->dev_addr[2] = 0xc8; - dev->dev_addr[3] &= 0x0f; - dev->dev_addr[3] |= 0x70; - } else { - printk(" not identified in the printer port\n"); - goto out1; - } - - printk(", Ethernet Address: %pM\n", dev->dev_addr); - - dev->netdev_ops = &de600_netdev_ops; - - dev->flags&=~IFF_MULTICAST; - - select_prn(); - - err = register_netdev(dev); - if (err) - goto out1; - - return dev; - -out1: - release_region(DE600_IO, 3); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static int adapter_init(struct net_device *dev) -{ - int i; - - select_nic(); - rx_page = 0; /* used by RESET */ - de600_put_command(RESET); - de600_put_command(STOP_RESET); - - /* Check if it is still there... */ - /* Get the some bytes of the adapter ethernet address from the ROM */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - de600_read_byte(READ_DATA, dev); - if ((de600_read_byte(READ_DATA, dev) != 0xde) || - (de600_read_byte(READ_DATA, dev) != 0x15)) { - /* was: if (de600_read_status(dev) & 0xf0) { */ - printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n"); - /* Goodbye, cruel world... */ - dev->flags &= ~IFF_UP; - de600_close(dev); - was_down = 1; - netif_stop_queue(dev); /* Transmit busy... */ - return 1; /* failed */ - } - - if (was_down) { - printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name); - was_down = 0; - } - - tx_fifo_in = 0; - tx_fifo_out = 0; - free_tx_pages = TX_PAGES; - - - /* set the ether address. */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - for (i = 0; i < ETH_ALEN; i++) - de600_put_byte(dev->dev_addr[i]); - - /* where to start saving incoming packets */ - rx_page = RX_BP | RX_BASE_PAGE; - de600_setup_address(MEM_4K, RW_ADDR); - /* Enable receiver */ - de600_put_command(RX_ENABLE); - select_prn(); - - netif_start_queue(dev); - - return 0; /* OK */ -} - -static struct net_device *de600_dev; - -static int __init de600_init(void) -{ - de600_dev = de600_probe(); - if (IS_ERR(de600_dev)) - return PTR_ERR(de600_dev); - return 0; -} - -static void __exit de600_exit(void) -{ - unregister_netdev(de600_dev); - release_region(DE600_IO, 3); - free_netdev(de600_dev); -} - -module_init(de600_init); -module_exit(de600_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dlink/de600.h b/drivers/net/ethernet/dlink/de600.h deleted file mode 100644 index e80ecba..0000000 --- a/drivers/net/ethernet/dlink/de600.h +++ /dev/null @@ -1,168 +0,0 @@ -/************************************************** - * * - * Definition of D-Link Ethernet Pocket adapter * - * * - **************************************************/ -/* - * D-Link Ethernet pocket adapter ports - */ -/* - * OK, so I'm cheating, but there are an awful lot of - * reads and writes in order to get anything in and out - * of the DE-600 with 4 bits at a time in the parallel port, - * so every saved instruction really helps :-) - */ - -#ifndef DE600_IO -#define DE600_IO 0x378 -#endif - -#define DATA_PORT (DE600_IO) -#define STATUS_PORT (DE600_IO + 1) -#define COMMAND_PORT (DE600_IO + 2) - -#ifndef DE600_IRQ -#define DE600_IRQ 7 -#endif -/* - * It really should look like this, and autoprobing as well... - * -#define DATA_PORT (dev->base_addr + 0) -#define STATUS_PORT (dev->base_addr + 1) -#define COMMAND_PORT (dev->base_addr + 2) -#define DE600_IRQ dev->irq - */ - -/* - * D-Link COMMAND_PORT commands - */ -#define SELECT_NIC 0x04 /* select Network Interface Card */ -#define SELECT_PRN 0x1c /* select Printer */ -#define NML_PRN 0xec /* normal Printer situation */ -#define IRQEN 0x10 /* enable IRQ line */ - -/* - * D-Link STATUS_PORT - */ -#define RX_BUSY 0x80 -#define RX_GOOD 0x40 -#define TX_FAILED16 0x10 -#define TX_BUSY 0x08 - -/* - * D-Link DATA_PORT commands - * command in low 4 bits - * data in high 4 bits - * select current data nibble with HI_NIBBLE bit - */ -#define WRITE_DATA 0x00 /* write memory */ -#define READ_DATA 0x01 /* read memory */ -#define STATUS 0x02 /* read status register */ -#define COMMAND 0x03 /* write command register (see COMMAND below) */ -#define NULL_COMMAND 0x04 /* null command */ -#define RX_LEN 0x05 /* read received packet length */ -#define TX_ADDR 0x06 /* set adapter transmit memory address */ -#define RW_ADDR 0x07 /* set adapter read/write memory address */ -#define HI_NIBBLE 0x08 /* read/write the high nibble of data, - or-ed with rest of command */ - -/* - * command register, accessed through DATA_PORT with low bits = COMMAND - */ -#define RX_ALL 0x01 /* PROMISCUOUS */ -#define RX_BP 0x02 /* default: BROADCAST & PHYSICAL ADDRESS */ -#define RX_MBP 0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */ - -#define TX_ENABLE 0x04 /* bit 2 */ -#define RX_ENABLE 0x08 /* bit 3 */ - -#define RESET 0x80 /* set bit 7 high */ -#define STOP_RESET 0x00 /* set bit 7 low */ - -/* - * data to command register - * (high 4 bits in write to DATA_PORT) - */ -#define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */ -#define RX_BASE_PAGE 0x20 /* bit 5, always set when specifying RX_ADDR */ -#define FLIP_IRQ 0x40 /* bit 6 */ - -/* - * D-Link adapter internal memory: - * - * 0-2K 1:st transmit page (send from pointer up to 2K) - * 2-4K 2:nd transmit page (send from pointer up to 4K) - * - * 4-6K 1:st receive page (data from 4K upwards) - * 6-8K 2:nd receive page (data from 6K upwards) - * - * 8K+ Adapter ROM (contains magic code and last 3 bytes of Ethernet address) - */ -#define MEM_2K 0x0800 /* 2048 */ -#define MEM_4K 0x1000 /* 4096 */ -#define MEM_6K 0x1800 /* 6144 */ -#define NODE_ADDRESS 0x2000 /* 8192 */ - -#define RUNT 60 /* Too small Ethernet packet */ - -/************************************************** - * * - * End of definition * - * * - **************************************************/ - -/* - * Index to functions, as function prototypes. - */ -/* Routines used internally. (See "convenience macros") */ -static u8 de600_read_status(struct net_device *dev); -static u8 de600_read_byte(unsigned char type, struct net_device *dev); - -/* Put in the device structure. */ -static int de600_open(struct net_device *dev); -static int de600_close(struct net_device *dev); -static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev); - -/* Dispatch from interrupts. */ -static irqreturn_t de600_interrupt(int irq, void *dev_id); -static int de600_tx_intr(struct net_device *dev, int irq_status); -static void de600_rx_intr(struct net_device *dev); - -/* Initialization */ -static void trigger_interrupt(struct net_device *dev); -static int adapter_init(struct net_device *dev); - -/* - * Convenience macros/functions for D-Link adapter - */ - -#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN -#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN - -/* Thanks for hints from Mark Burton */ -#define de600_put_byte(data) ( \ - outb_p(((data) << 4) | WRITE_DATA , DATA_PORT), \ - outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT)) - -/* - * The first two outb_p()'s below could perhaps be deleted if there - * would be more delay in the last two. Not certain about it yet... - */ -#define de600_put_command(cmd) ( \ - outb_p(( rx_page << 4) | COMMAND , DATA_PORT), \ - outb_p(( rx_page & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \ - outb_p(((rx_page | cmd) << 4) | COMMAND , DATA_PORT), \ - outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT)) - -#define de600_setup_address(addr,type) ( \ - outb_p((((addr) << 4) & 0xf0) | type , DATA_PORT), \ - outb_p(( (addr) & 0xf0) | type | HI_NIBBLE, DATA_PORT), \ - outb_p((((addr) >> 4) & 0xf0) | type , DATA_PORT), \ - outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT)) - -#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K)) - -/* Flip bit, only 2 pages */ -#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT) - -#define tx_page_adr(a) (((a) + 1) * MEM_2K) diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c deleted file mode 100644 index 2e2bc60..0000000 --- a/drivers/net/ethernet/dlink/de620.c +++ /dev/null @@ -1,987 +0,0 @@ -/* - * de620.c $Revision: 1.40 $ BETA - * - * - * Linux driver for the D-Link DE-620 Ethernet pocket adapter. - * - * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall - * - * Based on adapter information gathered from DOS packetdriver - * sources from D-Link Inc: (Special thanks to Henry Ngai of D-Link.) - * Portions (C) Copyright D-Link SYSTEM Inc. 1991, 1992 - * Copyright, 1988, Russell Nelson, Crynwr Software - * - * Adapted to the sample network driver core for linux, - * written by: Donald Becker - * (Now at ) - * - * Valuable assistance from: - * J. Joshua Kopper - * Olav Kvittem - * Germano Caronni - * Jeremy Fitzhardinge - * - *****************************************************************************/ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - *****************************************************************************/ -static const char version[] = - "de620.c: $Revision: 1.40 $, Bjorn Ekwall \n"; - -/*********************************************************************** - * - * "Tuning" section. - * - * Compile-time options: (see below for descriptions) - * -DDE620_IO=0x378 (lpt1) - * -DDE620_IRQ=7 (lpt1) - * -DSHUTDOWN_WHEN_LOST - * -DCOUNT_LOOPS - * -DLOWSPEED - * -DREAD_DELAY - * -DWRITE_DELAY - */ - -/* - * This driver assumes that the printer port is a "normal", - * dumb, uni-directional port! - * If your port is "fancy" in any way, please try to set it to "normal" - * with your BIOS setup. I have no access to machines with bi-directional - * ports, so I can't test such a driver :-( - * (Yes, I _know_ it is possible to use DE620 with bidirectional ports...) - * - * There are some clones of DE620 out there, with different names. - * If the current driver does not recognize a clone, try to change - * the following #define to: - * - * #define DE620_CLONE 1 - */ -#define DE620_CLONE 0 - -/* - * If the adapter has problems with high speeds, enable this #define - * otherwise full printerport speed will be attempted. - * - * You can tune the READ_DELAY/WRITE_DELAY below if you enable LOWSPEED - * -#define LOWSPEED - */ - -#ifndef READ_DELAY -#define READ_DELAY 100 /* adapter internal read delay in 100ns units */ -#endif - -#ifndef WRITE_DELAY -#define WRITE_DELAY 100 /* adapter internal write delay in 100ns units */ -#endif - -/* - * Enable this #define if you want the adapter to do a "ifconfig down" on - * itself when we have detected that something is possibly wrong with it. - * The default behaviour is to retry with "adapter_init()" until success. - * This should be used for debugging purposes only. - * -#define SHUTDOWN_WHEN_LOST - */ - -#ifdef LOWSPEED -/* - * Enable this #define if you want to see debugging output that show how long - * we have to wait before the DE-620 is ready for the next read/write/command. - * -#define COUNT_LOOPS - */ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Constant definitions for the DE-620 registers, commands and bits */ -#include "de620.h" - -typedef unsigned char byte; - -/******************************************************* - * * - * Definition of D-Link DE-620 Ethernet Pocket adapter * - * See also "de620.h" * - * * - *******************************************************/ -#ifndef DE620_IO /* Compile-time configurable */ -#define DE620_IO 0x378 -#endif - -#ifndef DE620_IRQ /* Compile-time configurable */ -#define DE620_IRQ 7 -#endif - -#define DATA_PORT (dev->base_addr) -#define STATUS_PORT (dev->base_addr + 1) -#define COMMAND_PORT (dev->base_addr + 2) - -#define RUNT 60 /* Too small Ethernet packet */ -#define GIANT 1514 /* largest legal size packet, no fcs */ - -/* - * Force media with insmod: - * insmod de620.o bnc=1 - * or - * insmod de620.o utp=1 - * - * Force io and/or irq with insmod: - * insmod de620.o io=0x378 irq=7 - * - * Make a clone skip the Ethernet-address range check: - * insmod de620.o clone=1 - */ -static int bnc; -static int utp; -static int io = DE620_IO; -static int irq = DE620_IRQ; -static int clone = DE620_CLONE; - -static spinlock_t de620_lock; - -module_param(bnc, int, 0); -module_param(utp, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(clone, int, 0); -MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)"); -MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)"); -MODULE_PARM_DESC(io, "DE-620 I/O base address,required"); -MODULE_PARM_DESC(irq, "DE-620 IRQ number,required"); -MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)"); - -/*********************************************** - * * - * Index to functions, as function prototypes. * - * * - ***********************************************/ - -/* - * Routines used internally. (See also "convenience macros.. below") - */ - -/* Put in the device structure. */ -static int de620_open(struct net_device *); -static int de620_close(struct net_device *); -static void de620_set_multicast_list(struct net_device *); -static int de620_start_xmit(struct sk_buff *, struct net_device *); - -/* Dispatch from interrupts. */ -static irqreturn_t de620_interrupt(int, void *); -static int de620_rx_intr(struct net_device *); - -/* Initialization */ -static int adapter_init(struct net_device *); -static int read_eeprom(struct net_device *); - - -/* - * D-Link driver variables: - */ -#define SCR_DEF NIBBLEMODE |INTON | SLEEP | AUTOTX -#define TCR_DEF RXPB /* not used: | TXSUCINT | T16INT */ -#define DE620_RX_START_PAGE 12 /* 12 pages (=3k) reserved for tx */ -#define DEF_NIC_CMD IRQEN | ICEN | DS1 - -static volatile byte NIC_Cmd; -static volatile byte next_rx_page; -static byte first_rx_page; -static byte last_rx_page; -static byte EIPRegister; - -static struct nic { - byte NodeID[6]; - byte RAM_Size; - byte Model; - byte Media; - byte SCR; -} nic_data; - -/********************************************************** - * * - * Convenience macros/functions for D-Link DE-620 adapter * - * * - **********************************************************/ -#define de620_tx_buffs(dd) (inb(STATUS_PORT) & (TXBF0 | TXBF1)) -#define de620_flip_ds(dd) NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT); - -/* Check for ready-status, and return a nibble (high 4 bits) for data input */ -#ifdef COUNT_LOOPS -static int tot_cnt; -#endif -static inline byte -de620_ready(struct net_device *dev) -{ - byte value; - register short int cnt = 0; - - while ((((value = inb(STATUS_PORT)) & READY) == 0) && (cnt <= 1000)) - ++cnt; - -#ifdef COUNT_LOOPS - tot_cnt += cnt; -#endif - return value & 0xf0; /* nibble */ -} - -static inline void -de620_send_command(struct net_device *dev, byte cmd) -{ - de620_ready(dev); - if (cmd == W_DUMMY) - outb(NIC_Cmd, COMMAND_PORT); - - outb(cmd, DATA_PORT); - - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - de620_ready(dev); - outb(NIC_Cmd, COMMAND_PORT); -} - -static inline void -de620_put_byte(struct net_device *dev, byte value) -{ - /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ - de620_ready(dev); - outb(value, DATA_PORT); - de620_flip_ds(dev); -} - -static inline byte -de620_read_byte(struct net_device *dev) -{ - byte value; - - /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ - value = de620_ready(dev); /* High nibble */ - de620_flip_ds(dev); - value |= de620_ready(dev) >> 4; /* Low nibble */ - return value; -} - -static inline void -de620_write_block(struct net_device *dev, byte *buffer, int count, int pad) -{ -#ifndef LOWSPEED - byte uflip = NIC_Cmd ^ (DS0 | DS1); - byte dflip = NIC_Cmd; -#else /* LOWSPEED */ -#ifdef COUNT_LOOPS - int bytes = count; -#endif /* COUNT_LOOPS */ -#endif /* LOWSPEED */ - -#ifdef LOWSPEED -#ifdef COUNT_LOOPS - tot_cnt = 0; -#endif /* COUNT_LOOPS */ - /* No further optimization useful, the limit is in the adapter. */ - for ( ; count > 0; --count, ++buffer) { - de620_put_byte(dev,*buffer); - } - for ( count = pad ; count > 0; --count, ++buffer) { - de620_put_byte(dev, 0); - } - de620_send_command(dev,W_DUMMY); -#ifdef COUNT_LOOPS - /* trial debug output: loops per byte in de620_ready() */ - printk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1))); -#endif /* COUNT_LOOPS */ -#else /* not LOWSPEED */ - for ( ; count > 0; count -=2) { - outb(*buffer++, DATA_PORT); - outb(uflip, COMMAND_PORT); - outb(*buffer++, DATA_PORT); - outb(dflip, COMMAND_PORT); - } - de620_send_command(dev,W_DUMMY); -#endif /* LOWSPEED */ -} - -static inline void -de620_read_block(struct net_device *dev, byte *data, int count) -{ -#ifndef LOWSPEED - byte value; - byte uflip = NIC_Cmd ^ (DS0 | DS1); - byte dflip = NIC_Cmd; -#else /* LOWSPEED */ -#ifdef COUNT_LOOPS - int bytes = count; - - tot_cnt = 0; -#endif /* COUNT_LOOPS */ -#endif /* LOWSPEED */ - -#ifdef LOWSPEED - /* No further optimization useful, the limit is in the adapter. */ - while (count-- > 0) { - *data++ = de620_read_byte(dev); - de620_flip_ds(dev); - } -#ifdef COUNT_LOOPS - /* trial debug output: loops per byte in de620_ready() */ - printk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1))); -#endif /* COUNT_LOOPS */ -#else /* not LOWSPEED */ - while (count-- > 0) { - value = inb(STATUS_PORT) & 0xf0; /* High nibble */ - outb(uflip, COMMAND_PORT); - *data++ = value | inb(STATUS_PORT) >> 4; /* Low nibble */ - outb(dflip , COMMAND_PORT); - } -#endif /* LOWSPEED */ -} - -static inline void -de620_set_delay(struct net_device *dev) -{ - de620_ready(dev); - outb(W_DFR, DATA_PORT); - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - - de620_ready(dev); -#ifdef LOWSPEED - outb(WRITE_DELAY, DATA_PORT); -#else - outb(0, DATA_PORT); -#endif - de620_flip_ds(dev); - - de620_ready(dev); -#ifdef LOWSPEED - outb(READ_DELAY, DATA_PORT); -#else - outb(0, DATA_PORT); -#endif - de620_flip_ds(dev); -} - -static inline void -de620_set_register(struct net_device *dev, byte reg, byte value) -{ - de620_ready(dev); - outb(reg, DATA_PORT); - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - - de620_put_byte(dev, value); -} - -static inline byte -de620_get_register(struct net_device *dev, byte reg) -{ - byte value; - - de620_send_command(dev,reg); - value = de620_read_byte(dev); - de620_send_command(dev,W_DUMMY); - - return value; -} - -/********************************************************************* - * - * Open/initialize the board. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - * - */ -static int de620_open(struct net_device *dev) -{ - int ret = request_irq(dev->irq, de620_interrupt, 0, dev->name, dev); - if (ret) { - printk (KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq); - return ret; - } - - if (adapter_init(dev)) { - ret = -EIO; - goto out_free_irq; - } - - netif_start_queue(dev); - return 0; - -out_free_irq: - free_irq(dev->irq, dev); - return ret; -} - -/************************************************ - * - * The inverse routine to de620_open(). - * - */ - -static int de620_close(struct net_device *dev) -{ - netif_stop_queue(dev); - /* disable recv */ - de620_set_register(dev, W_TCR, RXOFF); - free_irq(dev->irq, dev); - return 0; -} - -/********************************************* - * - * Set or clear the multicast filter for this adaptor. - * (no real multicast implemented for the DE-620, but she can be promiscuous...) - * - */ - -static void de620_set_multicast_list(struct net_device *dev) -{ - if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) - { /* Enable promiscuous mode */ - de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL); - } - else - { /* Disable promiscuous mode, use normal mode */ - de620_set_register(dev, W_TCR, TCR_DEF); - } -} - -/******************************************************* - * - * Handle timeouts on transmit - */ - -static void de620_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); - /* Restart the adapter. */ - if (!adapter_init(dev)) /* maybe close it */ - netif_wake_queue(dev); -} - -/******************************************************* - * - * Copy a buffer to the adapter transmit page memory. - * Start sending. - */ -static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int len; - byte *buffer = skb->data; - byte using_txbuf; - - using_txbuf = de620_tx_buffs(dev); /* Peek at the adapter */ - - netif_stop_queue(dev); - - - if ((len = skb->len) < RUNT) - len = RUNT; - if (len & 1) /* send an even number of bytes */ - ++len; - - /* Start real output */ - - spin_lock_irqsave(&de620_lock, flags); - pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n", - (int)skb->len, using_txbuf); - - /* select a free tx buffer. if there is one... */ - switch (using_txbuf) { - default: /* both are free: use TXBF0 */ - case TXBF1: /* use TXBF0 */ - de620_send_command(dev,W_CR | RW0); - using_txbuf |= TXBF0; - break; - - case TXBF0: /* use TXBF1 */ - de620_send_command(dev,W_CR | RW1); - using_txbuf |= TXBF1; - break; - - case (TXBF0 | TXBF1): /* NONE!!! */ - printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name); - spin_unlock_irqrestore(&de620_lock, flags); - return NETDEV_TX_BUSY; - } - de620_write_block(dev, buffer, skb->len, len-skb->len); - - if(!(using_txbuf == (TXBF0 | TXBF1))) - netif_wake_queue(dev); - - dev->stats.tx_packets++; - spin_unlock_irqrestore(&de620_lock, flags); - dev_kfree_skb (skb); - return NETDEV_TX_OK; -} - -/***************************************************** - * - * Handle the network interface interrupts. - * - */ -static irqreturn_t -de620_interrupt(int irq_in, void *dev_id) -{ - struct net_device *dev = dev_id; - byte irq_status; - int bogus_count = 0; - int again = 0; - - spin_lock(&de620_lock); - - /* Read the status register (_not_ the status port) */ - irq_status = de620_get_register(dev, R_STS); - - pr_debug("de620_interrupt (%2.2X)\n", irq_status); - - if (irq_status & RXGOOD) { - do { - again = de620_rx_intr(dev); - pr_debug("again=%d\n", again); - } - while (again && (++bogus_count < 100)); - } - - if(de620_tx_buffs(dev) != (TXBF0 | TXBF1)) - netif_wake_queue(dev); - - spin_unlock(&de620_lock); - return IRQ_HANDLED; -} - -/************************************** - * - * Get a packet from the adapter - * - * Send it "upstairs" - * - */ -static int de620_rx_intr(struct net_device *dev) -{ - struct header_buf { - byte status; - byte Rx_NextPage; - unsigned short Rx_ByteCount; - } header_buf; - struct sk_buff *skb; - int size; - byte *buffer; - byte pagelink; - byte curr_page; - - pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page); - - /* Tell the adapter that we are going to read data, and from where */ - de620_send_command(dev, W_CR | RRN); - de620_set_register(dev, W_RSA1, next_rx_page); - de620_set_register(dev, W_RSA0, 0); - - /* Deep breath, and away we goooooo */ - de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf)); - pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n", - header_buf.status, header_buf.Rx_NextPage, - header_buf.Rx_ByteCount); - - /* Plausible page header? */ - pagelink = header_buf.Rx_NextPage; - if ((pagelink < first_rx_page) || (last_rx_page < pagelink)) { - /* Ouch... Forget it! Skip all and start afresh... */ - printk(KERN_WARNING "%s: Ring overrun? Restoring...\n", dev->name); - /* You win some, you lose some. And sometimes plenty... */ - adapter_init(dev); - netif_wake_queue(dev); - dev->stats.rx_over_errors++; - return 0; - } - - /* OK, this look good, so far. Let's see if it's consistent... */ - /* Let's compute the start of the next packet, based on where we are */ - pagelink = next_rx_page + - ((header_buf.Rx_ByteCount + (4 - 1 + 0x100)) >> 8); - - /* Are we going to wrap around the page counter? */ - if (pagelink > last_rx_page) - pagelink -= (last_rx_page - first_rx_page + 1); - - /* Is the _computed_ next page number equal to what the adapter says? */ - if (pagelink != header_buf.Rx_NextPage) { - /* Naah, we'll skip this packet. Probably bogus data as well */ - printk(KERN_WARNING "%s: Page link out of sync! Restoring...\n", dev->name); - next_rx_page = header_buf.Rx_NextPage; /* at least a try... */ - de620_send_command(dev, W_DUMMY); - de620_set_register(dev, W_NPRF, next_rx_page); - dev->stats.rx_over_errors++; - return 0; - } - next_rx_page = pagelink; - - size = header_buf.Rx_ByteCount - 4; - if ((size < RUNT) || (GIANT < size)) { - printk(KERN_WARNING "%s: Illegal packet size: %d!\n", dev->name, size); - } - else { /* Good packet? */ - skb = netdev_alloc_skb(dev, size + 2); - if (skb == NULL) { /* Yeah, but no place to put it... */ - printk(KERN_WARNING "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); - dev->stats.rx_dropped++; - } - else { /* Yep! Go get it! */ - skb_reserve(skb,2); /* Align */ - /* skb->data points to the start of sk_buff data area */ - buffer = skb_put(skb,size); - /* copy the packet into the buffer */ - de620_read_block(dev, buffer, size); - pr_debug("Read %d bytes\n", size); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); /* deliver it "upstairs" */ - /* count all receives */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - } - } - - /* Let's peek ahead to see if we have read the last current packet */ - /* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */ - curr_page = de620_get_register(dev, R_CPR); - de620_set_register(dev, W_NPRF, next_rx_page); - pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page); - - return next_rx_page != curr_page; /* That was slightly tricky... */ -} - -/********************************************* - * - * Reset the adapter to a known state - * - */ -static int adapter_init(struct net_device *dev) -{ - int i; - static int was_down; - - if ((nic_data.Model == 3) || (nic_data.Model == 0)) { /* CT */ - EIPRegister = NCTL0; - if (nic_data.Media != 1) - EIPRegister |= NIS0; /* not BNC */ - } - else if (nic_data.Model == 2) { /* UTP */ - EIPRegister = NCTL0 | NIS0; - } - - if (utp) - EIPRegister = NCTL0 | NIS0; - if (bnc) - EIPRegister = NCTL0; - - de620_send_command(dev, W_CR | RNOP | CLEAR); - de620_send_command(dev, W_CR | RNOP); - - de620_set_register(dev, W_SCR, SCR_DEF); - /* disable recv to wait init */ - de620_set_register(dev, W_TCR, RXOFF); - - /* Set the node ID in the adapter */ - for (i = 0; i < 6; ++i) { /* W_PARn = 0xaa + n */ - de620_set_register(dev, W_PAR0 + i, dev->dev_addr[i]); - } - - de620_set_register(dev, W_EIP, EIPRegister); - - next_rx_page = first_rx_page = DE620_RX_START_PAGE; - if (nic_data.RAM_Size) - last_rx_page = nic_data.RAM_Size - 1; - else /* 64k RAM */ - last_rx_page = 255; - - de620_set_register(dev, W_SPR, first_rx_page); /* Start Page Register*/ - de620_set_register(dev, W_EPR, last_rx_page); /* End Page Register */ - de620_set_register(dev, W_CPR, first_rx_page);/*Current Page Register*/ - de620_send_command(dev, W_NPR | first_rx_page); /* Next Page Register*/ - de620_send_command(dev, W_DUMMY); - de620_set_delay(dev); - - /* Final sanity check: Anybody out there? */ - /* Let's hope some bits from the statusregister make a good check */ -#define CHECK_MASK ( 0 | TXSUC | T16 | 0 | RXCRC | RXSHORT | 0 | 0 ) -#define CHECK_OK ( 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 ) - /* success: X 0 0 X 0 0 X X */ - /* ignore: EEDI RXGOOD COLS LNKS*/ - - if (((i = de620_get_register(dev, R_STS)) & CHECK_MASK) != CHECK_OK) { - printk(KERN_ERR "%s: Something has happened to the DE-620! Please check it" -#ifdef SHUTDOWN_WHEN_LOST - " and do a new ifconfig" -#endif - "! (%02x)\n", dev->name, i); -#ifdef SHUTDOWN_WHEN_LOST - /* Goodbye, cruel world... */ - dev->flags &= ~IFF_UP; - de620_close(dev); -#endif - was_down = 1; - return 1; /* failed */ - } - if (was_down) { - printk(KERN_WARNING "%s: Thanks, I feel much better now!\n", dev->name); - was_down = 0; - } - - /* All OK, go ahead... */ - de620_set_register(dev, W_TCR, TCR_DEF); - - return 0; /* all ok */ -} - -static const struct net_device_ops de620_netdev_ops = { - .ndo_open = de620_open, - .ndo_stop = de620_close, - .ndo_start_xmit = de620_start_xmit, - .ndo_tx_timeout = de620_timeout, - .ndo_set_rx_mode = de620_set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/****************************************************************************** - * - * Only start-up code below - * - */ -/**************************************** - * - * Check if there is a DE-620 connected - */ -struct net_device * __init de620_probe(int unit) -{ - byte checkbyte = 0xa5; - struct net_device *dev; - int err = -ENOMEM; - int i; - - dev = alloc_etherdev(0); - if (!dev) - goto out; - - spin_lock_init(&de620_lock); - - /* - * This is where the base_addr and irq gets set. - * Tunable at compile-time and insmod-time - */ - dev->base_addr = io; - dev->irq = irq; - - /* allow overriding parameters on command line */ - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - pr_debug("%s", version); - - printk(KERN_INFO "D-Link DE-620 pocket adapter"); - - if (!request_region(dev->base_addr, 3, "de620")) { - printk(" io 0x%3lX, which is busy.\n", dev->base_addr); - err = -EBUSY; - goto out1; - } - - /* Initially, configure basic nibble mode, so we can read the EEPROM */ - NIC_Cmd = DEF_NIC_CMD; - de620_set_register(dev, W_EIP, EIPRegister); - - /* Anybody out there? */ - de620_set_register(dev, W_CPR, checkbyte); - checkbyte = de620_get_register(dev, R_CPR); - - if ((checkbyte != 0xa5) || (read_eeprom(dev) != 0)) { - printk(" not identified in the printer port\n"); - err = -ENODEV; - goto out2; - } - - /* else, got it! */ - dev->dev_addr[0] = nic_data.NodeID[0]; - for (i = 1; i < ETH_ALEN; i++) { - dev->dev_addr[i] = nic_data.NodeID[i]; - dev->broadcast[i] = 0xff; - } - - printk(", Ethernet Address: %pM", dev->dev_addr); - - printk(" (%dk RAM,", - (nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64); - - if (nic_data.Media == 1) - printk(" BNC)\n"); - else - printk(" UTP)\n"); - - dev->netdev_ops = &de620_netdev_ops; - dev->watchdog_timeo = HZ*2; - - /* base_addr and irq are already set, see above! */ - - /* dump eeprom */ - pr_debug("\nEEPROM contents:\n" - "RAM_Size = 0x%02X\n" - "NodeID = %pM\n" - "Model = %d\n" - "Media = %d\n" - "SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID, - nic_data.Model, nic_data.Media, nic_data.SCR); - - err = register_netdev(dev); - if (err) - goto out2; - return dev; - -out2: - release_region(dev->base_addr, 3); -out1: - free_netdev(dev); -out: - return ERR_PTR(err); -} - -/********************************** - * - * Read info from on-board EEPROM - * - * Note: Bitwise serial I/O to/from the EEPROM vi the status _register_! - */ -#define sendit(dev,data) de620_set_register(dev, W_EIP, data | EIPRegister); - -static unsigned short __init ReadAWord(struct net_device *dev, int from) -{ - unsigned short data; - int nbits; - - /* cs [__~~] SET SEND STATE */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 0); sendit(dev, 1); sendit(dev, 5); sendit(dev, 4); - - /* Send the 9-bit address from where we want to read the 16-bit word */ - for (nbits = 9; nbits > 0; --nbits, from <<= 1) { - if (from & 0x0100) { /* bit set? */ - /* cs [~~~~] SEND 1 */ - /* di [~~~~] */ - /* sck [_~~_] */ - sendit(dev, 6); sendit(dev, 7); sendit(dev, 7); sendit(dev, 6); - } - else { - /* cs [~~~~] SEND 0 */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); - } - } - - /* Shift in the 16-bit word. The bits appear serially in EEDI (=0x80) */ - for (data = 0, nbits = 16; nbits > 0; --nbits) { - /* cs [~~~~] SEND 0 */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); - data = (data << 1) | ((de620_get_register(dev, R_STS) & EEDI) >> 7); - } - /* cs [____] RESET SEND STATE */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 0); sendit(dev, 1); sendit(dev, 1); sendit(dev, 0); - - return data; -} - -static int __init read_eeprom(struct net_device *dev) -{ - unsigned short wrd; - - /* D-Link Ethernet addresses are in the series 00:80:c8:7X:XX:XX:XX */ - wrd = ReadAWord(dev, 0x1aa); /* bytes 0 + 1 of NodeID */ - if (!clone && (wrd != htons(0x0080))) /* Valid D-Link ether sequence? */ - return -1; /* Nope, not a DE-620 */ - nic_data.NodeID[0] = wrd & 0xff; - nic_data.NodeID[1] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ab); /* bytes 2 + 3 of NodeID */ - if (!clone && ((wrd & 0xff) != 0xc8)) /* Valid D-Link ether sequence? */ - return -1; /* Nope, not a DE-620 */ - nic_data.NodeID[2] = wrd & 0xff; - nic_data.NodeID[3] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ac); /* bytes 4 + 5 of NodeID */ - nic_data.NodeID[4] = wrd & 0xff; - nic_data.NodeID[5] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ad); /* RAM size in pages (256 bytes). 0 = 64k */ - nic_data.RAM_Size = (wrd >> 8); - - wrd = ReadAWord(dev, 0x1ae); /* hardware model (CT = 3) */ - nic_data.Model = (wrd & 0xff); - - wrd = ReadAWord(dev, 0x1af); /* media (indicates BNC/UTP) */ - nic_data.Media = (wrd & 0xff); - - wrd = ReadAWord(dev, 0x1a8); /* System Configuration Register */ - nic_data.SCR = (wrd >> 8); - - return 0; /* no errors */ -} - -/****************************************************************************** - * - * Loadable module skeleton - * - */ -#ifdef MODULE -static struct net_device *de620_dev; - -int __init init_module(void) -{ - de620_dev = de620_probe(-1); - if (IS_ERR(de620_dev)) - return PTR_ERR(de620_dev); - return 0; -} - -void cleanup_module(void) -{ - unregister_netdev(de620_dev); - release_region(de620_dev->base_addr, 3); - free_netdev(de620_dev); -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dlink/de620.h b/drivers/net/ethernet/dlink/de620.h deleted file mode 100644 index e8d9a88..0000000 --- a/drivers/net/ethernet/dlink/de620.h +++ /dev/null @@ -1,117 +0,0 @@ -/********************************************************* - * * - * Definition of D-Link DE-620 Ethernet Pocket adapter * - * * - *********************************************************/ - -/* DE-620's CMD port Command */ -#define CS0 0x08 /* 1->0 command strobe */ -#define ICEN 0x04 /* 0=enable DL3520 host interface */ -#define DS0 0x02 /* 1->0 data strobe 0 */ -#define DS1 0x01 /* 1->0 data strobe 1 */ - -#define WDIR 0x20 /* general 0=read 1=write */ -#define RDIR 0x00 /* (not 100% confirm ) */ -#define PS2WDIR 0x00 /* ps/2 mode 1=read, 0=write */ -#define PS2RDIR 0x20 - -#define IRQEN 0x10 /* 1 = enable printer IRQ line */ -#define SELECTIN 0x08 /* 1 = select printer */ -#define INITP 0x04 /* 0 = initial printer */ -#define AUTOFEED 0x02 /* 1 = printer auto form feed */ -#define STROBE 0x01 /* 0->1 data strobe */ - -#define RESET 0x08 -#define NIS0 0x20 /* 0 = BNC, 1 = UTP */ -#define NCTL0 0x10 - -/* DE-620 DIC Command */ -#define W_DUMMY 0x00 /* DIC reserved command */ -#define W_CR 0x20 /* DIC write command register */ -#define W_NPR 0x40 /* DIC write Next Page Register */ -#define W_TBR 0x60 /* DIC write Tx Byte Count 1 reg */ -#define W_RSA 0x80 /* DIC write Remote Start Addr 1 */ - -/* DE-620's STAT port bits 7-4 */ -#define EMPTY 0x80 /* 1 = receive buffer empty */ -#define INTLEVEL 0x40 /* 1 = interrupt level is high */ -#define TXBF1 0x20 /* 1 = transmit buffer 1 is in use */ -#define TXBF0 0x10 /* 1 = transmit buffer 0 is in use */ -#define READY 0x08 /* 1 = h/w ready to accept cmd/data */ - -/* IDC 1 Command */ -#define W_RSA1 0xa0 /* write remote start address 1 */ -#define W_RSA0 0xa1 /* write remote start address 0 */ -#define W_NPRF 0xa2 /* write next page register NPR15-NPR8 */ -#define W_DFR 0xa3 /* write delay factor register */ -#define W_CPR 0xa4 /* write current page register */ -#define W_SPR 0xa5 /* write start page register */ -#define W_EPR 0xa6 /* write end page register */ -#define W_SCR 0xa7 /* write system configuration register */ -#define W_TCR 0xa8 /* write Transceiver Configuration reg */ -#define W_EIP 0xa9 /* write EEPM Interface port */ -#define W_PAR0 0xaa /* write physical address register 0 */ -#define W_PAR1 0xab /* write physical address register 1 */ -#define W_PAR2 0xac /* write physical address register 2 */ -#define W_PAR3 0xad /* write physical address register 3 */ -#define W_PAR4 0xae /* write physical address register 4 */ -#define W_PAR5 0xaf /* write physical address register 5 */ - -/* IDC 2 Command */ -#define R_STS 0xc0 /* read status register */ -#define R_CPR 0xc1 /* read current page register */ -#define R_BPR 0xc2 /* read boundary page register */ -#define R_TDR 0xc3 /* read time domain reflectometry reg */ - -/* STATUS Register */ -#define EEDI 0x80 /* EEPM DO pin */ -#define TXSUC 0x40 /* tx success */ -#define T16 0x20 /* tx fail 16 times */ -#define TS1 0x40 /* 0=Tx success, 1=T16 */ -#define TS0 0x20 /* 0=Tx success, 1=T16 */ -#define RXGOOD 0x10 /* rx a good packet */ -#define RXCRC 0x08 /* rx a CRC error packet */ -#define RXSHORT 0x04 /* rx a short packet */ -#define COLS 0x02 /* coaxial collision status */ -#define LNKS 0x01 /* UTP link status */ - -/* Command Register */ -#define CLEAR 0x10 /* reset part of hardware */ -#define NOPER 0x08 /* No Operation */ -#define RNOP 0x08 -#define RRA 0x06 /* After RR then auto-advance NPR & BPR(=NPR-1) */ -#define RRN 0x04 /* Normal Remote Read mode */ -#define RW1 0x02 /* Remote Write tx buffer 1 ( page 6 - 11 ) */ -#define RW0 0x00 /* Remote Write tx buffer 0 ( page 0 - 5 ) */ -#define TXEN 0x01 /* 0->1 tx enable */ - -/* System Configuration Register */ -#define TESTON 0x80 /* test host data transfer reliability */ -#define SLEEP 0x40 /* sleep mode */ -#if 0 -#define FASTMODE 0x04 /* fast mode for intel 82360SL fast mode */ -#define BYTEMODE 0x02 /* byte mode */ -#else -#define FASTMODE 0x20 /* fast mode for intel 82360SL fast mode */ -#define BYTEMODE 0x10 /* byte mode */ -#endif -#define NIBBLEMODE 0x00 /* nibble mode */ -#define IRQINV 0x08 /* turn off IRQ line inverter */ -#define IRQNML 0x00 /* turn on IRQ line inverter */ -#define INTON 0x04 -#define AUTOFFSET 0x02 /* auto shift address to TPR+12 */ -#define AUTOTX 0x01 /* auto tx when leave RW mode */ - -/* Transceiver Configuration Register */ -#define JABBER 0x80 /* generate jabber condition */ -#define TXSUCINT 0x40 /* enable tx success interrupt */ -#define T16INT 0x20 /* enable T16 interrupt */ -#define RXERRPKT 0x10 /* accept CRC error or short packet */ -#define EXTERNALB2 0x0C /* external loopback 2 */ -#define EXTERNALB1 0x08 /* external loopback 1 */ -#define INTERNALB 0x04 /* internal loopback */ -#define NMLOPERATE 0x00 /* normal operation */ -#define RXPBM 0x03 /* rx physical, broadcast, multicast */ -#define RXPB 0x02 /* rx physical, broadcast */ -#define RXALL 0x01 /* rx all packet */ -#define RXOFF 0x00 /* rx disable */ -- cgit v0.10.2 From 0e245dbaac9fa1c2fd0f4e2af7b9f6d874083a8b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 9 Jan 2013 20:51:58 -0500 Subject: drivers/net: delete the 3Com 3c505/3c507 intel i825xx support For those of us who were around in the early to mid 1990's, we will remember that the i825xx ethernet support was not something that was considered sufficiently vetted for 24/7 use. Folks might be inclined to use *functional* ISA hardware on some near expired P3 ISA machines for dedicated workhorse applications, but the odds of using (and relying on) one of these old/experimental drivers is essentially nil. So lets remove them. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index d487127..ac66a6a 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -51,8 +51,6 @@ extern struct net_device *fmv18x_probe(int unit); extern struct net_device *eth16i_probe(int unit); extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); -extern struct net_device *el16_probe(int unit); -extern struct net_device *elplus_probe(int unit); extern struct net_device *e2100_probe(int unit); extern struct net_device *ni5010_probe(int unit); extern struct net_device *ni52_probe(int unit); @@ -164,12 +162,6 @@ static struct devprobe2 isa_probes[] __initdata = { #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ {i82596_probe, 0}, #endif -#ifdef CONFIG_EL16 /* 3c507 */ - {el16_probe, 0}, -#endif -#ifdef CONFIG_ELPLUS /* 3c505 */ - {elplus_probe, 0}, -#endif #ifdef CONFIG_NI5010 {ni5010_probe, 0}, #endif diff --git a/drivers/net/ethernet/i825xx/3c505.c b/drivers/net/ethernet/i825xx/3c505.c deleted file mode 100644 index 6d000d6..0000000 --- a/drivers/net/ethernet/i825xx/3c505.c +++ /dev/null @@ -1,1672 +0,0 @@ -/* - * Linux Ethernet device driver for the 3Com Etherlink Plus (3C505) - * By Craig Southeren, Juha Laiho and Philip Blundell - * - * 3c505.c This module implements an interface to the 3Com - * Etherlink Plus (3c505) Ethernet card. Linux device - * driver interface reverse engineered from the Linux 3C509 - * device drivers. Some 3C505 information gleaned from - * the Crynwr packet driver. Still this driver would not - * be here without 3C505 technical reference provided by - * 3Com. - * - * $Id: 3c505.c,v 1.10 1996/04/16 13:06:27 phil Exp $ - * - * Authors: Linux 3c505 device driver by - * Craig Southeren, - * Final debugging by - * Andrew Tridgell, - * Auto irq/address, tuning, cleanup and v1.1.4+ kernel mods by - * Juha Laiho, - * Linux 3C509 driver by - * Donald Becker, - * (Now at ) - * Crynwr packet driver by - * Krishnan Gopalan and Gregg Stefancik, - * Clemson University Engineering Computer Operations. - * Portions of the code have been adapted from the 3c505 - * driver for NCSA Telnet by Bruce Orchard and later - * modified by Warren Van Houten and krus@diku.dk. - * 3C505 technical information provided by - * Terry Murphy, of 3Com Network Adapter Division - * Linux 1.3.0 changes by - * Alan Cox - * More debugging, DMA support, currently maintained by - * Philip Blundell - * Multicard/soft configurable dma channel/rev 2 hardware support - * by Christopher Collins - * Ethtool support (jgarzik), 11/17/2001 - */ - -#define DRV_NAME "3c505" -#define DRV_VERSION "1.10a" - - -/* Theory of operation: - * - * The 3c505 is quite an intelligent board. All communication with it is done - * by means of Primary Command Blocks (PCBs); these are transferred using PIO - * through the command register. The card has 256k of on-board RAM, which is - * used to buffer received packets. It might seem at first that more buffers - * are better, but in fact this isn't true. From my tests, it seems that - * more than about 10 buffers are unnecessary, and there is a noticeable - * performance hit in having more active on the card. So the majority of the - * card's memory isn't, in fact, used. Sadly, the card only has one transmit - * buffer and, short of loading our own firmware into it (which is what some - * drivers resort to) there's nothing we can do about this. - * - * We keep up to 4 "receive packet" commands active on the board at a time. - * When a packet comes in, so long as there is a receive command active, the - * board will send us a "packet received" PCB and then add the data for that - * packet to the DMA queue. If a DMA transfer is not already in progress, we - * set one up to start uploading the data. We have to maintain a list of - * backlogged receive packets, because the card may decide to tell us about - * a newly-arrived packet at any time, and we may not be able to start a DMA - * transfer immediately (ie one may already be going on). We can't NAK the - * PCB, because then it would throw the packet away. - * - * Trying to send a PCB to the card at the wrong moment seems to have bad - * effects. If we send it a transmit PCB while a receive DMA is happening, - * it will just NAK the PCB and so we will have wasted our time. Worse, it - * sometimes seems to interrupt the transfer. The majority of the low-level - * code is protected by one huge semaphore -- "busy" -- which is set whenever - * it probably isn't safe to do anything to the card. The receive routine - * must gain a lock on "busy" before it can start a DMA transfer, and the - * transmit routine must gain a lock before it sends the first PCB to the card. - * The send_pcb() routine also has an internal semaphore to protect it against - * being re-entered (which would be disastrous) -- this is needed because - * several things can happen asynchronously (re-priming the receiver and - * asking the card for statistics, for example). send_pcb() will also refuse - * to talk to the card at all if a DMA upload is happening. The higher-level - * networking code will reschedule a later retry if some part of the driver - * is blocked. In practice, this doesn't seem to happen very often. - */ - -/* This driver may now work with revision 2.x hardware, since all the read - * operations on the HCR have been removed (we now keep our own softcopy). - * But I don't have an old card to test it on. - * - * This has had the bad effect that the autoprobe routine is now a bit - * less friendly to other devices. However, it was never very good. - * before, so I doubt it will hurt anybody. - */ - -/* The driver is a mess. I took Craig's and Juha's code, and hacked it firstly - * to make it more reliable, and secondly to add DMA mode. Many things could - * probably be done better; the concurrency protection is particularly awful. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "3c505.h" - -/********************************************************* - * - * define debug messages here as common strings to reduce space - * - *********************************************************/ - -#define timeout_msg "*** timeout at %s:%s (line %d) ***\n" -#define TIMEOUT_MSG(lineno) \ - pr_notice(timeout_msg, __FILE__, __func__, (lineno)) - -#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n" -#define INVALID_PCB_MSG(len) \ - pr_notice(invalid_pcb_msg, (len), __FILE__, __func__, __LINE__) - -#define search_msg "%s: Looking for 3c505 adapter at address %#x..." - -#define stilllooking_msg "still looking..." - -#define found_msg "found.\n" - -#define notfound_msg "not found (reason = %d)\n" - -#define couldnot_msg "%s: 3c505 not found\n" - -/********************************************************* - * - * various other debug stuff - * - *********************************************************/ - -#ifdef ELP_DEBUG -static int elp_debug = ELP_DEBUG; -#else -static int elp_debug; -#endif -#define debug elp_debug - -/* - * 0 = no messages (well, some) - * 1 = messages when high level commands performed - * 2 = messages when low level commands performed - * 3 = messages when interrupts received - */ - -/***************************************************************** - * - * List of I/O-addresses we try to auto-sense - * Last element MUST BE 0! - *****************************************************************/ - -static int addr_list[] __initdata = {0x300, 0x280, 0x310, 0}; - -/* Dma Memory related stuff */ - -static unsigned long dma_mem_alloc(int size) -{ - int order = get_order(size); - return __get_dma_pages(GFP_KERNEL, order); -} - - -/***************************************************************** - * - * Functions for I/O (note the inline !) - * - *****************************************************************/ - -static inline unsigned char inb_status(unsigned int base_addr) -{ - return inb(base_addr + PORT_STATUS); -} - -static inline int inb_command(unsigned int base_addr) -{ - return inb(base_addr + PORT_COMMAND); -} - -static inline void outb_control(unsigned char val, struct net_device *dev) -{ - outb(val, dev->base_addr + PORT_CONTROL); - ((elp_device *)(netdev_priv(dev)))->hcr_val = val; -} - -#define HCR_VAL(x) (((elp_device *)(netdev_priv(x)))->hcr_val) - -static inline void outb_command(unsigned char val, unsigned int base_addr) -{ - outb(val, base_addr + PORT_COMMAND); -} - -static inline unsigned int backlog_next(unsigned int n) -{ - return (n + 1) % BACKLOG_SIZE; -} - -/***************************************************************** - * - * useful functions for accessing the adapter - * - *****************************************************************/ - -/* - * use this routine when accessing the ASF bits as they are - * changed asynchronously by the adapter - */ - -/* get adapter PCB status */ -#define GET_ASF(addr) \ - (get_status(addr)&ASF_PCB_MASK) - -static inline int get_status(unsigned int base_addr) -{ - unsigned long timeout = jiffies + 10*HZ/100; - register int stat1; - do { - stat1 = inb_status(base_addr); - } while (stat1 != inb_status(base_addr) && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - return stat1; -} - -static inline void set_hsf(struct net_device *dev, int hsf) -{ - elp_device *adapter = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - outb_control((HCR_VAL(dev) & ~HSF_PCB_MASK) | hsf, dev); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static bool start_receive(struct net_device *, pcb_struct *); - -static inline void adapter_reset(struct net_device *dev) -{ - unsigned long timeout; - elp_device *adapter = netdev_priv(dev); - unsigned char orig_hcr = adapter->hcr_val; - - outb_control(0, dev); - - if (inb_status(dev->base_addr) & ACRF) { - do { - inb_command(dev->base_addr); - timeout = jiffies + 2*HZ/100; - while (time_before_eq(jiffies, timeout) && !(inb_status(dev->base_addr) & ACRF)); - } while (inb_status(dev->base_addr) & ACRF); - set_hsf(dev, HSF_PCB_NAK); - } - outb_control(adapter->hcr_val | ATTN | DIR, dev); - mdelay(10); - outb_control(adapter->hcr_val & ~ATTN, dev); - mdelay(10); - outb_control(adapter->hcr_val | FLSH, dev); - mdelay(10); - outb_control(adapter->hcr_val & ~FLSH, dev); - mdelay(10); - - outb_control(orig_hcr, dev); - if (!start_receive(dev, &adapter->tx_pcb)) - pr_err("%s: start receive command failed\n", dev->name); -} - -/* Check to make sure that a DMA transfer hasn't timed out. This should - * never happen in theory, but seems to occur occasionally if the card gets - * prodded at the wrong time. - */ -static inline void check_3c505_dma(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) { - unsigned long flags, f; - pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name, - adapter->current_dma.direction ? "download" : "upload", - get_dma_residue(dev->dma)); - spin_lock_irqsave(&adapter->lock, flags); - adapter->dmaing = 0; - adapter->busy = 0; - - f=claim_dma_lock(); - disable_dma(dev->dma); - release_dma_lock(f); - - if (adapter->rx_active) - adapter->rx_active--; - outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); - spin_unlock_irqrestore(&adapter->lock, flags); - } -} - -/* Primitive functions used by send_pcb() */ -static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte) -{ - unsigned long timeout; - outb_command(byte, base_addr); - for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) { - if (inb_status(base_addr) & HCRE) - return false; - } - pr_warning("3c505: send_pcb_slow timed out\n"); - return true; -} - -static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte) -{ - unsigned int timeout; - outb_command(byte, base_addr); - for (timeout = 0; timeout < 40000; timeout++) { - if (inb_status(base_addr) & HCRE) - return false; - } - pr_warning("3c505: send_pcb_fast timed out\n"); - return true; -} - -/* Check to see if the receiver needs restarting, and kick it if so */ -static inline void prime_rx(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) { - if (!start_receive(dev, &adapter->itx_pcb)) - break; - } -} - -/***************************************************************** - * - * send_pcb - * Send a PCB to the adapter. - * - * output byte to command reg --<--+ - * wait until HCRE is non zero | - * loop until all bytes sent -->--+ - * set HSF1 and HSF2 to 1 - * output pcb length - * wait until ASF give ACK or NAK - * set HSF1 and HSF2 to 0 - * - *****************************************************************/ - -/* This can be quite slow -- the adapter is allowed to take up to 40ms - * to respond to the initial interrupt. - * - * We run initially with interrupts turned on, but with a semaphore set - * so that nobody tries to re-enter this code. Once the first byte has - * gone through, we turn interrupts off and then send the others (the - * timeout is reduced to 500us). - */ - -static bool send_pcb(struct net_device *dev, pcb_struct * pcb) -{ - int i; - unsigned long timeout; - elp_device *adapter = netdev_priv(dev); - unsigned long flags; - - check_3c505_dma(dev); - - if (adapter->dmaing && adapter->current_dma.direction == 0) - return false; - - /* Avoid contention */ - if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) { - if (elp_debug >= 3) { - pr_debug("%s: send_pcb entered while threaded\n", dev->name); - } - return false; - } - /* - * load each byte into the command register and - * wait for the HCRE bit to indicate the adapter - * had read the byte - */ - set_hsf(dev, 0); - - if (send_pcb_slow(dev->base_addr, pcb->command)) - goto abort; - - spin_lock_irqsave(&adapter->lock, flags); - - if (send_pcb_fast(dev->base_addr, pcb->length)) - goto sti_abort; - - for (i = 0; i < pcb->length; i++) { - if (send_pcb_fast(dev->base_addr, pcb->data.raw[i])) - goto sti_abort; - } - - outb_control(adapter->hcr_val | 3, dev); /* signal end of PCB */ - outb_command(2 + pcb->length, dev->base_addr); - - /* now wait for the acknowledgement */ - spin_unlock_irqrestore(&adapter->lock, flags); - - for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) { - switch (GET_ASF(dev->base_addr)) { - case ASF_PCB_ACK: - adapter->send_pcb_semaphore = 0; - return true; - - case ASF_PCB_NAK: -#ifdef ELP_DEBUG - pr_debug("%s: send_pcb got NAK\n", dev->name); -#endif - goto abort; - } - } - - if (elp_debug >= 1) - pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n", - dev->name, inb_status(dev->base_addr)); - goto abort; - - sti_abort: - spin_unlock_irqrestore(&adapter->lock, flags); - abort: - adapter->send_pcb_semaphore = 0; - return false; -} - - -/***************************************************************** - * - * receive_pcb - * Read a PCB from the adapter - * - * wait for ACRF to be non-zero ---<---+ - * input a byte | - * if ASF1 and ASF2 were not both one | - * before byte was read, loop --->---+ - * set HSF1 and HSF2 for ack - * - *****************************************************************/ - -static bool receive_pcb(struct net_device *dev, pcb_struct * pcb) -{ - int i, j; - int total_length; - int stat; - unsigned long timeout; - unsigned long flags; - - elp_device *adapter = netdev_priv(dev); - - set_hsf(dev, 0); - - /* get the command code */ - timeout = jiffies + 2*HZ/100; - while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - return false; - } - pcb->command = inb_command(dev->base_addr); - - /* read the data length */ - timeout = jiffies + 3*HZ/100; - while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - pr_info("%s: status %02x\n", dev->name, stat); - return false; - } - pcb->length = inb_command(dev->base_addr); - - if (pcb->length > MAX_PCB_DATA) { - INVALID_PCB_MSG(pcb->length); - adapter_reset(dev); - return false; - } - /* read the data */ - spin_lock_irqsave(&adapter->lock, flags); - for (i = 0; i < MAX_PCB_DATA; i++) { - for (j = 0; j < 20000; j++) { - stat = get_status(dev->base_addr); - if (stat & ACRF) - break; - } - pcb->data.raw[i] = inb_command(dev->base_addr); - if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000) - break; - } - spin_unlock_irqrestore(&adapter->lock, flags); - if (i >= MAX_PCB_DATA) { - INVALID_PCB_MSG(i); - return false; - } - if (j >= 20000) { - TIMEOUT_MSG(__LINE__); - return false; - } - /* the last "data" byte was really the length! */ - total_length = pcb->data.raw[i]; - - /* safety check total length vs data length */ - if (total_length != (pcb->length + 2)) { - if (elp_debug >= 2) - pr_warning("%s: mangled PCB received\n", dev->name); - set_hsf(dev, HSF_PCB_NAK); - return false; - } - - if (pcb->command == CMD_RECEIVE_PACKET_COMPLETE) { - if (test_and_set_bit(0, (void *) &adapter->busy)) { - if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) { - set_hsf(dev, HSF_PCB_NAK); - pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name); - pcb->command = 0; - return true; - } else { - pcb->command = 0xff; - } - } - } - set_hsf(dev, HSF_PCB_ACK); - return true; -} - -/****************************************************** - * - * queue a receive command on the adapter so we will get an - * interrupt when a packet is received. - * - ******************************************************/ - -static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb) -{ - bool status; - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: restarting receiver\n", dev->name); - tx_pcb->command = CMD_RECEIVE_PACKET; - tx_pcb->length = sizeof(struct Rcv_pkt); - tx_pcb->data.rcv_pkt.buf_seg - = tx_pcb->data.rcv_pkt.buf_ofs = 0; /* Unused */ - tx_pcb->data.rcv_pkt.buf_len = 1600; - tx_pcb->data.rcv_pkt.timeout = 0; /* set timeout to zero */ - status = send_pcb(dev, tx_pcb); - if (status) - adapter->rx_active++; - return status; -} - -/****************************************************** - * - * extract a packet from the adapter - * this routine is only called from within the interrupt - * service routine, so no cli/sti calls are needed - * note that the length is always assumed to be even - * - ******************************************************/ - -static void receive_packet(struct net_device *dev, int len) -{ - int rlen; - elp_device *adapter = netdev_priv(dev); - void *target; - struct sk_buff *skb; - unsigned long flags; - - rlen = (len + 1) & ~1; - skb = netdev_alloc_skb(dev, rlen + 2); - - if (!skb) { - pr_warning("%s: memory squeeze, dropping packet\n", dev->name); - target = adapter->dma_buffer; - adapter->current_dma.target = NULL; - /* FIXME: stats */ - return; - } - - skb_reserve(skb, 2); - target = skb_put(skb, rlen); - if ((unsigned long)(target + rlen) >= MAX_DMA_ADDRESS) { - adapter->current_dma.target = target; - target = adapter->dma_buffer; - } else { - adapter->current_dma.target = NULL; - } - - /* if this happens, we die */ - if (test_and_set_bit(0, (void *) &adapter->dmaing)) - pr_err("%s: rx blocked, DMA in progress, dir %d\n", - dev->name, adapter->current_dma.direction); - - adapter->current_dma.direction = 0; - adapter->current_dma.length = rlen; - adapter->current_dma.skb = skb; - adapter->current_dma.start_time = jiffies; - - outb_control(adapter->hcr_val | DIR | TCEN | DMAE, dev); - - flags=claim_dma_lock(); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, 0x04); /* dma read */ - set_dma_addr(dev->dma, isa_virt_to_bus(target)); - set_dma_count(dev->dma, rlen); - enable_dma(dev->dma); - release_dma_lock(flags); - - if (elp_debug >= 3) { - pr_debug("%s: rx DMA transfer started\n", dev->name); - } - - if (adapter->rx_active) - adapter->rx_active--; - - if (!adapter->busy) - pr_warning("%s: receive_packet called, busy not set.\n", dev->name); -} - -/****************************************************** - * - * interrupt handler - * - ******************************************************/ - -static irqreturn_t elp_interrupt(int irq, void *dev_id) -{ - int len; - int dlen; - int icount = 0; - struct net_device *dev = dev_id; - elp_device *adapter = netdev_priv(dev); - unsigned long timeout; - - spin_lock(&adapter->lock); - - do { - /* - * has a DMA transfer finished? - */ - if (inb_status(dev->base_addr) & DONE) { - if (!adapter->dmaing) - pr_warning("%s: phantom DMA completed\n", dev->name); - - if (elp_debug >= 3) - pr_debug("%s: %s DMA complete, status %02x\n", dev->name, - adapter->current_dma.direction ? "tx" : "rx", - inb_status(dev->base_addr)); - - outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); - if (adapter->current_dma.direction) { - dev_kfree_skb_irq(adapter->current_dma.skb); - } else { - struct sk_buff *skb = adapter->current_dma.skb; - if (skb) { - if (adapter->current_dma.target) { - /* have already done the skb_put() */ - memcpy(adapter->current_dma.target, adapter->dma_buffer, adapter->current_dma.length); - } - skb->protocol = eth_type_trans(skb,dev); - dev->stats.rx_bytes += skb->len; - netif_rx(skb); - } - } - adapter->dmaing = 0; - if (adapter->rx_backlog.in != adapter->rx_backlog.out) { - int t = adapter->rx_backlog.length[adapter->rx_backlog.out]; - adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out); - if (elp_debug >= 2) - pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t); - receive_packet(dev, t); - } else { - adapter->busy = 0; - } - } else { - /* has one timed out? */ - check_3c505_dma(dev); - } - - /* - * receive a PCB from the adapter - */ - timeout = jiffies + 3*HZ/100; - while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) { - if (receive_pcb(dev, &adapter->irx_pcb)) { - switch (adapter->irx_pcb.command) - { - case 0: - break; - /* - * received a packet - this must be handled fast - */ - case 0xff: - case CMD_RECEIVE_PACKET_COMPLETE: - /* if the device isn't open, don't pass packets up the stack */ - if (!netif_running(dev)) - break; - len = adapter->irx_pcb.data.rcv_resp.pkt_len; - dlen = adapter->irx_pcb.data.rcv_resp.buf_len; - if (adapter->irx_pcb.data.rcv_resp.timeout != 0) { - pr_err("%s: interrupt - packet not received correctly\n", dev->name); - } else { - if (elp_debug >= 3) { - pr_debug("%s: interrupt - packet received of length %i (%i)\n", - dev->name, len, dlen); - } - if (adapter->irx_pcb.command == 0xff) { - if (elp_debug >= 2) - pr_debug("%s: adding packet to backlog (len = %d)\n", - dev->name, dlen); - adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen; - adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in); - } else { - receive_packet(dev, dlen); - } - if (elp_debug >= 3) - pr_debug("%s: packet received\n", dev->name); - } - break; - - /* - * 82586 configured correctly - */ - case CMD_CONFIGURE_82586_RESPONSE: - adapter->got[CMD_CONFIGURE_82586] = 1; - if (elp_debug >= 3) - pr_debug("%s: interrupt - configure response received\n", dev->name); - break; - - /* - * Adapter memory configuration - */ - case CMD_CONFIGURE_ADAPTER_RESPONSE: - adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1; - if (elp_debug >= 3) - pr_debug("%s: Adapter memory configuration %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - /* - * Multicast list loading - */ - case CMD_LOAD_MULTICAST_RESPONSE: - adapter->got[CMD_LOAD_MULTICAST_LIST] = 1; - if (elp_debug >= 3) - pr_debug("%s: Multicast address list loading %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - /* - * Station address setting - */ - case CMD_SET_ADDRESS_RESPONSE: - adapter->got[CMD_SET_STATION_ADDRESS] = 1; - if (elp_debug >= 3) - pr_debug("%s: Ethernet address setting %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - - /* - * received board statistics - */ - case CMD_NETWORK_STATISTICS_RESPONSE: - dev->stats.rx_packets += adapter->irx_pcb.data.netstat.tot_recv; - dev->stats.tx_packets += adapter->irx_pcb.data.netstat.tot_xmit; - dev->stats.rx_crc_errors += adapter->irx_pcb.data.netstat.err_CRC; - dev->stats.rx_frame_errors += adapter->irx_pcb.data.netstat.err_align; - dev->stats.rx_fifo_errors += adapter->irx_pcb.data.netstat.err_ovrrun; - dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res; - adapter->got[CMD_NETWORK_STATISTICS] = 1; - if (elp_debug >= 3) - pr_debug("%s: interrupt - statistics response received\n", dev->name); - break; - - /* - * sent a packet - */ - case CMD_TRANSMIT_PACKET_COMPLETE: - if (elp_debug >= 3) - pr_debug("%s: interrupt - packet sent\n", dev->name); - if (!netif_running(dev)) - break; - switch (adapter->irx_pcb.data.xmit_resp.c_stat) { - case 0xffff: - dev->stats.tx_aborted_errors++; - pr_info("%s: transmit timed out, network cable problem?\n", dev->name); - break; - case 0xfffe: - dev->stats.tx_fifo_errors++; - pr_info("%s: transmit timed out, FIFO underrun\n", dev->name); - break; - } - netif_wake_queue(dev); - break; - - /* - * some unknown PCB - */ - default: - pr_debug("%s: unknown PCB received - %2.2x\n", - dev->name, adapter->irx_pcb.command); - break; - } - } else { - pr_warning("%s: failed to read PCB on interrupt\n", dev->name); - adapter_reset(dev); - } - } - - } while (icount++ < 5 && (inb_status(dev->base_addr) & (ACRF | DONE))); - - prime_rx(dev); - - /* - * indicate no longer in interrupt routine - */ - spin_unlock(&adapter->lock); - return IRQ_HANDLED; -} - - -/****************************************************** - * - * open the board - * - ******************************************************/ - -static int elp_open(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - int retval; - - if (elp_debug >= 3) - pr_debug("%s: request to open device\n", dev->name); - - /* - * make sure we actually found the device - */ - if (adapter == NULL) { - pr_err("%s: Opening a non-existent physical device\n", dev->name); - return -EAGAIN; - } - /* - * disable interrupts on the board - */ - outb_control(0, dev); - - /* - * clear any pending interrupts - */ - inb_command(dev->base_addr); - adapter_reset(dev); - - /* - * no receive PCBs active - */ - adapter->rx_active = 0; - - adapter->busy = 0; - adapter->send_pcb_semaphore = 0; - adapter->rx_backlog.in = 0; - adapter->rx_backlog.out = 0; - - spin_lock_init(&adapter->lock); - - /* - * install our interrupt service routine - */ - if ((retval = request_irq(dev->irq, elp_interrupt, 0, dev->name, dev))) { - pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq); - return retval; - } - if ((retval = request_dma(dev->dma, dev->name))) { - free_irq(dev->irq, dev); - pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma); - return retval; - } - adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE); - if (!adapter->dma_buffer) { - pr_err("%s: could not allocate DMA buffer\n", dev->name); - free_dma(dev->dma); - free_irq(dev->irq, dev); - return -ENOMEM; - } - adapter->dmaing = 0; - - /* - * enable interrupts on the board - */ - outb_control(CMDE, dev); - - /* - * configure adapter memory: we need 10 multicast addresses, default==0 - */ - if (elp_debug >= 3) - pr_debug("%s: sending 3c505 memory configuration command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; - adapter->tx_pcb.data.memconf.cmd_q = 10; - adapter->tx_pcb.data.memconf.rcv_q = 20; - adapter->tx_pcb.data.memconf.mcast = 10; - adapter->tx_pcb.data.memconf.frame = 20; - adapter->tx_pcb.data.memconf.rcv_b = 20; - adapter->tx_pcb.data.memconf.progs = 0; - adapter->tx_pcb.length = sizeof(struct Memconf); - adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send memory configuration command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } - - - /* - * configure adapter to receive broadcast messages and wait for response - */ - if (elp_debug >= 3) - pr_debug("%s: sending 82586 configure command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_82586; - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; - adapter->tx_pcb.length = 2; - adapter->got[CMD_CONFIGURE_82586] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send 82586 configure command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } - - /* enable burst-mode DMA */ - /* outb(0x1, dev->base_addr + PORT_AUXDMA); */ - - /* - * queue receive commands to provide buffering - */ - prime_rx(dev); - if (elp_debug >= 3) - pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active); - - /* - * device is now officially open! - */ - - netif_start_queue(dev); - return 0; -} - - -/****************************************************** - * - * send a packet to the adapter - * - ******************************************************/ - -static netdev_tx_t send_packet(struct net_device *dev, struct sk_buff *skb) -{ - elp_device *adapter = netdev_priv(dev); - unsigned long target; - unsigned long flags; - - /* - * make sure the length is even and no shorter than 60 bytes - */ - unsigned int nlen = (((skb->len < 60) ? 60 : skb->len) + 1) & (~1); - - if (test_and_set_bit(0, (void *) &adapter->busy)) { - if (elp_debug >= 2) - pr_debug("%s: transmit blocked\n", dev->name); - return false; - } - - dev->stats.tx_bytes += nlen; - - /* - * send the adapter a transmit packet command. Ignore segment and offset - * and make sure the length is even - */ - adapter->tx_pcb.command = CMD_TRANSMIT_PACKET; - adapter->tx_pcb.length = sizeof(struct Xmit_pkt); - adapter->tx_pcb.data.xmit_pkt.buf_ofs - = adapter->tx_pcb.data.xmit_pkt.buf_seg = 0; /* Unused */ - adapter->tx_pcb.data.xmit_pkt.pkt_len = nlen; - - if (!send_pcb(dev, &adapter->tx_pcb)) { - adapter->busy = 0; - return false; - } - /* if this happens, we die */ - if (test_and_set_bit(0, (void *) &adapter->dmaing)) - pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction); - - adapter->current_dma.direction = 1; - adapter->current_dma.start_time = jiffies; - - if ((unsigned long)(skb->data + nlen) >= MAX_DMA_ADDRESS || nlen != skb->len) { - skb_copy_from_linear_data(skb, adapter->dma_buffer, nlen); - memset(adapter->dma_buffer+skb->len, 0, nlen-skb->len); - target = isa_virt_to_bus(adapter->dma_buffer); - } - else { - target = isa_virt_to_bus(skb->data); - } - adapter->current_dma.skb = skb; - - flags=claim_dma_lock(); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, 0x48); /* dma memory -> io */ - set_dma_addr(dev->dma, target); - set_dma_count(dev->dma, nlen); - outb_control(adapter->hcr_val | DMAE | TCEN, dev); - enable_dma(dev->dma); - release_dma_lock(flags); - - if (elp_debug >= 3) - pr_debug("%s: DMA transfer started\n", dev->name); - - return true; -} - -/* - * The upper layer thinks we timed out - */ - -static void elp_timeout(struct net_device *dev) -{ - int stat; - - stat = inb_status(dev->base_addr); - pr_warning("%s: transmit timed out, lost %s?\n", dev->name, - (stat & ACRF) ? "interrupt" : "command"); - if (elp_debug >= 1) - pr_debug("%s: status %#02x\n", dev->name, stat); - dev->trans_start = jiffies; /* prevent tx timeout */ - dev->stats.tx_dropped++; - netif_wake_queue(dev); -} - -/****************************************************** - * - * start the transmitter - * return 0 if sent OK, else return 1 - * - ******************************************************/ - -static netdev_tx_t elp_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - elp_device *adapter = netdev_priv(dev); - - spin_lock_irqsave(&adapter->lock, flags); - check_3c505_dma(dev); - - if (elp_debug >= 3) - pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len); - - netif_stop_queue(dev); - - /* - * send the packet at skb->data for skb->len - */ - if (!send_packet(dev, skb)) { - if (elp_debug >= 2) { - pr_debug("%s: failed to transmit packet\n", dev->name); - } - spin_unlock_irqrestore(&adapter->lock, flags); - return NETDEV_TX_BUSY; - } - if (elp_debug >= 3) - pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len); - - prime_rx(dev); - spin_unlock_irqrestore(&adapter->lock, flags); - netif_start_queue(dev); - return NETDEV_TX_OK; -} - -/****************************************************** - * - * return statistics on the board - * - ******************************************************/ - -static struct net_device_stats *elp_get_stats(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: request for stats\n", dev->name); - - /* If the device is closed, just return the latest stats we have, - - we cannot ask from the adapter without interrupts */ - if (!netif_running(dev)) - return &dev->stats; - - /* send a get statistics command to the board */ - adapter->tx_pcb.command = CMD_NETWORK_STATISTICS; - adapter->tx_pcb.length = 0; - adapter->got[CMD_NETWORK_STATISTICS] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send get statistics command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - return &dev->stats; - } - } - - /* statistics are now up to date */ - return &dev->stats; -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -/****************************************************** - * - * close the board - * - ******************************************************/ - -static int elp_close(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: request to close device\n", dev->name); - - netif_stop_queue(dev); - - /* Someone may request the device statistic information even when - * the interface is closed. The following will update the statistics - * structure in the driver, so we'll be able to give current statistics. - */ - (void) elp_get_stats(dev); - - /* - * disable interrupts on the board - */ - outb_control(0, dev); - - /* - * release the IRQ - */ - free_irq(dev->irq, dev); - - free_dma(dev->dma); - free_pages((unsigned long) adapter->dma_buffer, get_order(DMA_BUFFER_SIZE)); - - return 0; -} - - -/************************************************************ - * - * Set multicast list - * num_addrs==0: clear mc_list - * num_addrs==-1: set promiscuous mode - * num_addrs>0: set mc_list - * - ************************************************************/ - -static void elp_set_mc_list(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - struct netdev_hw_addr *ha; - int i; - unsigned long flags; - - if (elp_debug >= 3) - pr_debug("%s: request to set multicast list\n", dev->name); - - spin_lock_irqsave(&adapter->lock, flags); - - if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - /* send a "load multicast list" command to the board, max 10 addrs/cmd */ - /* if num_addrs==0 the list will be cleared */ - adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST; - adapter->tx_pcb.length = 6 * netdev_mc_count(dev); - i = 0; - netdev_for_each_mc_addr(ha, dev) - memcpy(adapter->tx_pcb.data.multicast[i++], - ha->addr, 6); - adapter->got[CMD_LOAD_MULTICAST_LIST] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send set_multicast command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - } - } - if (!netdev_mc_empty(dev)) - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI; - else /* num_addrs == 0 */ - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; - } else - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_PROMISC; - /* - * configure adapter to receive messages (as specified above) - * and wait for response - */ - if (elp_debug >= 3) - pr_debug("%s: sending 82586 configure command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_82586; - adapter->tx_pcb.length = 2; - adapter->got[CMD_CONFIGURE_82586] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - { - spin_unlock_irqrestore(&adapter->lock, flags); - pr_err("%s: couldn't send 82586 configure command\n", dev->name); - } - else { - unsigned long timeout = jiffies + TIMEOUT; - spin_unlock_irqrestore(&adapter->lock, flags); - while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } -} - -/************************************************************ - * - * A couple of tests to see if there's 3C505 or not - * Called only by elp_autodetect - ************************************************************/ - -static int __init elp_sense(struct net_device *dev) -{ - int addr = dev->base_addr; - const char *name = dev->name; - byte orig_HSR; - - if (!request_region(addr, ELP_IO_EXTENT, "3c505")) - return -ENODEV; - - orig_HSR = inb_status(addr); - - if (elp_debug > 0) - pr_debug(search_msg, name, addr); - - if (orig_HSR == 0xff) { - if (elp_debug > 0) - pr_cont(notfound_msg, 1); - goto out; - } - - /* Wait for a while; the adapter may still be booting up */ - if (elp_debug > 0) - pr_cont(stilllooking_msg); - - if (orig_HSR & DIR) { - /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */ - outb(0, dev->base_addr + PORT_CONTROL); - msleep(300); - if (inb_status(addr) & DIR) { - if (elp_debug > 0) - pr_cont(notfound_msg, 2); - goto out; - } - } else { - /* If HCR.DIR is down, we pull it up. HSR.DIR should follow. */ - outb(DIR, dev->base_addr + PORT_CONTROL); - msleep(300); - if (!(inb_status(addr) & DIR)) { - if (elp_debug > 0) - pr_cont(notfound_msg, 3); - goto out; - } - } - /* - * It certainly looks like a 3c505. - */ - if (elp_debug > 0) - pr_cont(found_msg); - - return 0; -out: - release_region(addr, ELP_IO_EXTENT); - return -ENODEV; -} - -/************************************************************* - * - * Search through addr_list[] and try to find a 3C505 - * Called only by eplus_probe - *************************************************************/ - -static int __init elp_autodetect(struct net_device *dev) -{ - int idx = 0; - - /* if base address set, then only check that address - otherwise, run through the table */ - if (dev->base_addr != 0) { /* dev->base_addr == 0 ==> plain autodetect */ - if (elp_sense(dev) == 0) - return dev->base_addr; - } else - while ((dev->base_addr = addr_list[idx++])) { - if (elp_sense(dev) == 0) - return dev->base_addr; - } - - /* could not find an adapter */ - if (elp_debug > 0) - pr_debug(couldnot_msg, dev->name); - - return 0; /* Because of this, the layer above will return -ENODEV */ -} - -static const struct net_device_ops elp_netdev_ops = { - .ndo_open = elp_open, - .ndo_stop = elp_close, - .ndo_get_stats = elp_get_stats, - .ndo_start_xmit = elp_start_xmit, - .ndo_tx_timeout = elp_timeout, - .ndo_set_rx_mode = elp_set_mc_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/****************************************************** - * - * probe for an Etherlink Plus board at the specified address - * - ******************************************************/ - -/* There are three situations we need to be able to detect here: - - * a) the card is idle - * b) the card is still booting up - * c) the card is stuck in a strange state (some DOS drivers do this) - * - * In case (a), all is well. In case (b), we wait 10 seconds to see if the - * card finishes booting, and carry on if so. In case (c), we do a hard reset, - * loop round, and hope for the best. - * - * This is all very unpleasant, but hopefully avoids the problems with the old - * probe code (which had a 15-second delay if the card was idle, and didn't - * work at all if it was in a weird state). - */ - -static int __init elplus_setup(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - int i, tries, tries1, okay; - unsigned long timeout; - unsigned long cookie = 0; - int err = -ENODEV; - - /* - * setup adapter structure - */ - - dev->base_addr = elp_autodetect(dev); - if (!dev->base_addr) - return -ENODEV; - - adapter->send_pcb_semaphore = 0; - - for (tries1 = 0; tries1 < 3; tries1++) { - outb_control((adapter->hcr_val | CMDE) & ~DIR, dev); - /* First try to write just one byte, to see if the card is - * responding at all normally. - */ - timeout = jiffies + 5*HZ/100; - okay = 0; - while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE)); - if ((inb_status(dev->base_addr) & HCRE)) { - outb_command(0, dev->base_addr); /* send a spurious byte */ - timeout = jiffies + 5*HZ/100; - while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE)); - if (inb_status(dev->base_addr) & HCRE) - okay = 1; - } - if (!okay) { - /* Nope, it's ignoring the command register. This means that - * either it's still booting up, or it's died. - */ - pr_err("%s: command register wouldn't drain, ", dev->name); - if ((inb_status(dev->base_addr) & 7) == 3) { - /* If the adapter status is 3, it *could* still be booting. - * Give it the benefit of the doubt for 10 seconds. - */ - pr_cont("assuming 3c505 still starting\n"); - timeout = jiffies + 10*HZ; - while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7)); - if (inb_status(dev->base_addr) & 7) { - pr_err("%s: 3c505 failed to start\n", dev->name); - } else { - okay = 1; /* It started */ - } - } else { - /* Otherwise, it must just be in a strange - * state. We probably need to kick it. - */ - pr_cont("3c505 is sulking\n"); - } - } - for (tries = 0; tries < 5 && okay; tries++) { - - /* - * Try to set the Ethernet address, to make sure that the board - * is working. - */ - adapter->tx_pcb.command = CMD_STATION_ADDRESS; - adapter->tx_pcb.length = 0; - cookie = probe_irq_on(); - if (!send_pcb(dev, &adapter->tx_pcb)) { - pr_err("%s: could not send first PCB\n", dev->name); - probe_irq_off(cookie); - continue; - } - if (!receive_pcb(dev, &adapter->rx_pcb)) { - pr_err("%s: could not read first PCB\n", dev->name); - probe_irq_off(cookie); - continue; - } - if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) || - (adapter->rx_pcb.length != 6)) { - pr_err("%s: first PCB wrong (%d, %d)\n", dev->name, - adapter->rx_pcb.command, adapter->rx_pcb.length); - probe_irq_off(cookie); - continue; - } - goto okay; - } - /* It's broken. Do a hard reset to re-initialise the board, - * and try again. - */ - pr_info("%s: resetting adapter\n", dev->name); - outb_control(adapter->hcr_val | FLSH | ATTN, dev); - outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev); - } - pr_err("%s: failed to initialise 3c505\n", dev->name); - goto out; - - okay: - if (dev->irq) { /* Is there a preset IRQ? */ - int rpt = probe_irq_off(cookie); - if (dev->irq != rpt) { - pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt); - } - /* if dev->irq == probe_irq_off(cookie), all is well */ - } else /* No preset IRQ; just use what we can detect */ - dev->irq = probe_irq_off(cookie); - switch (dev->irq) { /* Legal, sane? */ - case 0: - pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n", - dev->name); - goto out; - case 1: - case 6: - case 8: - case 13: - pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n", - dev->name, dev->irq); - goto out; - } - /* - * Now we have the IRQ number so we can disable the interrupts from - * the board until the board is opened. - */ - outb_control(adapter->hcr_val & ~CMDE, dev); - - /* - * copy Ethernet address into structure - */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = adapter->rx_pcb.data.eth_addr[i]; - - /* find a DMA channel */ - if (!dev->dma) { - if (dev->mem_start) { - dev->dma = dev->mem_start & 7; - } - else { - pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name); - dev->dma = ELP_DMA; - } - } - - /* - * print remainder of startup message - */ - pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ", - dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr); - /* - * read more information from the adapter - */ - - adapter->tx_pcb.command = CMD_ADAPTER_INFO; - adapter->tx_pcb.length = 0; - if (!send_pcb(dev, &adapter->tx_pcb) || - !receive_pcb(dev, &adapter->rx_pcb) || - (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) || - (adapter->rx_pcb.length != 10)) { - pr_cont("not responding to second PCB\n"); - } - pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, - adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz); - - /* - * reconfigure the adapter memory to better suit our purposes - */ - adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; - adapter->tx_pcb.length = 12; - adapter->tx_pcb.data.memconf.cmd_q = 8; - adapter->tx_pcb.data.memconf.rcv_q = 8; - adapter->tx_pcb.data.memconf.mcast = 10; - adapter->tx_pcb.data.memconf.frame = 10; - adapter->tx_pcb.data.memconf.rcv_b = 10; - adapter->tx_pcb.data.memconf.progs = 0; - if (!send_pcb(dev, &adapter->tx_pcb) || - !receive_pcb(dev, &adapter->rx_pcb) || - (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) || - (adapter->rx_pcb.length != 2)) { - pr_err("%s: could not configure adapter memory\n", dev->name); - } - if (adapter->rx_pcb.data.configure) { - pr_err("%s: adapter configuration failed\n", dev->name); - } - - dev->netdev_ops = &elp_netdev_ops; - dev->watchdog_timeo = 10*HZ; - dev->ethtool_ops = &netdev_ethtool_ops; /* local */ - - dev->mem_start = dev->mem_end = 0; - - err = register_netdev(dev); - if (err) - goto out; - - return 0; -out: - release_region(dev->base_addr, ELP_IO_EXTENT); - return err; -} - -#ifndef MODULE -struct net_device * __init elplus_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(elp_device)); - int err; - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = elplus_setup(dev); - if (err) { - free_netdev(dev); - return ERR_PTR(err); - } - return dev; -} - -#else -static struct net_device *dev_3c505[ELP_MAX_CARDS]; -static int io[ELP_MAX_CARDS]; -static int irq[ELP_MAX_CARDS]; -static int dma[ELP_MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); -MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)"); -MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)"); - -int __init init_module(void) -{ - int this_dev, found = 0; - - for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) { - struct net_device *dev = alloc_etherdev(sizeof(elp_device)); - if (!dev) - break; - - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (dma[this_dev]) { - dev->dma = dma[this_dev]; - } else { - dev->dma = ELP_DMA; - pr_warning("3c505.c: warning, using default DMA channel,\n"); - } - if (io[this_dev] == 0) { - if (this_dev) { - free_netdev(dev); - break; - } - pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n"); - } - if (elplus_setup(dev) != 0) { - pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]); - free_netdev(dev); - break; - } - dev_3c505[this_dev] = dev; - found++; - } - if (!found) - return -ENODEV; - return 0; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) { - struct net_device *dev = dev_3c505[this_dev]; - if (dev) { - unregister_netdev(dev); - release_region(dev->base_addr, ELP_IO_EXTENT); - free_netdev(dev); - } - } -} - -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/i825xx/3c505.h b/drivers/net/ethernet/i825xx/3c505.h deleted file mode 100644 index 04df2a9..0000000 --- a/drivers/net/ethernet/i825xx/3c505.h +++ /dev/null @@ -1,292 +0,0 @@ -/***************************************************************** - * - * defines for 3Com Etherlink Plus adapter - * - *****************************************************************/ - -#define ELP_DMA 6 -#define ELP_RX_PCBS 4 -#define ELP_MAX_CARDS 4 - -/* - * I/O register offsets - */ -#define PORT_COMMAND 0x00 /* read/write, 8-bit */ -#define PORT_STATUS 0x02 /* read only, 8-bit */ -#define PORT_AUXDMA 0x02 /* write only, 8-bit */ -#define PORT_DATA 0x04 /* read/write, 16-bit */ -#define PORT_CONTROL 0x06 /* read/write, 8-bit */ - -#define ELP_IO_EXTENT 0x10 /* size of used IO registers */ - -/* - * host control registers bits - */ -#define ATTN 0x80 /* attention */ -#define FLSH 0x40 /* flush data register */ -#define DMAE 0x20 /* DMA enable */ -#define DIR 0x10 /* direction */ -#define TCEN 0x08 /* terminal count interrupt enable */ -#define CMDE 0x04 /* command register interrupt enable */ -#define HSF2 0x02 /* host status flag 2 */ -#define HSF1 0x01 /* host status flag 1 */ - -/* - * combinations of HSF flags used for PCB transmission - */ -#define HSF_PCB_ACK HSF1 -#define HSF_PCB_NAK HSF2 -#define HSF_PCB_END (HSF2|HSF1) -#define HSF_PCB_MASK (HSF2|HSF1) - -/* - * host status register bits - */ -#define HRDY 0x80 /* data register ready */ -#define HCRE 0x40 /* command register empty */ -#define ACRF 0x20 /* adapter command register full */ -/* #define DIR 0x10 direction - same as in control register */ -#define DONE 0x08 /* DMA done */ -#define ASF3 0x04 /* adapter status flag 3 */ -#define ASF2 0x02 /* adapter status flag 2 */ -#define ASF1 0x01 /* adapter status flag 1 */ - -/* - * combinations of ASF flags used for PCB reception - */ -#define ASF_PCB_ACK ASF1 -#define ASF_PCB_NAK ASF2 -#define ASF_PCB_END (ASF2|ASF1) -#define ASF_PCB_MASK (ASF2|ASF1) - -/* - * host aux DMA register bits - */ -#define DMA_BRST 0x01 /* DMA burst */ - -/* - * maximum amount of data allowed in a PCB - */ -#define MAX_PCB_DATA 62 - -/***************************************************************** - * - * timeout value - * this is a rough value used for loops to stop them from - * locking up the whole machine in the case of failure or - * error conditions - * - *****************************************************************/ - -#define TIMEOUT 300 - -/***************************************************************** - * - * PCB commands - * - *****************************************************************/ - -enum { - /* - * host PCB commands - */ - CMD_CONFIGURE_ADAPTER_MEMORY = 0x01, - CMD_CONFIGURE_82586 = 0x02, - CMD_STATION_ADDRESS = 0x03, - CMD_DMA_DOWNLOAD = 0x04, - CMD_DMA_UPLOAD = 0x05, - CMD_PIO_DOWNLOAD = 0x06, - CMD_PIO_UPLOAD = 0x07, - CMD_RECEIVE_PACKET = 0x08, - CMD_TRANSMIT_PACKET = 0x09, - CMD_NETWORK_STATISTICS = 0x0a, - CMD_LOAD_MULTICAST_LIST = 0x0b, - CMD_CLEAR_PROGRAM = 0x0c, - CMD_DOWNLOAD_PROGRAM = 0x0d, - CMD_EXECUTE_PROGRAM = 0x0e, - CMD_SELF_TEST = 0x0f, - CMD_SET_STATION_ADDRESS = 0x10, - CMD_ADAPTER_INFO = 0x11, - NUM_TRANSMIT_CMDS, - - /* - * adapter PCB commands - */ - CMD_CONFIGURE_ADAPTER_RESPONSE = 0x31, - CMD_CONFIGURE_82586_RESPONSE = 0x32, - CMD_ADDRESS_RESPONSE = 0x33, - CMD_DOWNLOAD_DATA_REQUEST = 0x34, - CMD_UPLOAD_DATA_REQUEST = 0x35, - CMD_RECEIVE_PACKET_COMPLETE = 0x38, - CMD_TRANSMIT_PACKET_COMPLETE = 0x39, - CMD_NETWORK_STATISTICS_RESPONSE = 0x3a, - CMD_LOAD_MULTICAST_RESPONSE = 0x3b, - CMD_CLEAR_PROGRAM_RESPONSE = 0x3c, - CMD_DOWNLOAD_PROGRAM_RESPONSE = 0x3d, - CMD_EXECUTE_RESPONSE = 0x3e, - CMD_SELF_TEST_RESPONSE = 0x3f, - CMD_SET_ADDRESS_RESPONSE = 0x40, - CMD_ADAPTER_INFO_RESPONSE = 0x41 -}; - -/* Definitions for the PCB data structure */ - -/* Data units */ -typedef unsigned char byte; -typedef unsigned short int word; -typedef unsigned long int dword; - -/* Data structures */ -struct Memconf { - word cmd_q, - rcv_q, - mcast, - frame, - rcv_b, - progs; -}; - -struct Rcv_pkt { - word buf_ofs, - buf_seg, - buf_len, - timeout; -}; - -struct Xmit_pkt { - word buf_ofs, - buf_seg, - pkt_len; -}; - -struct Rcv_resp { - word buf_ofs, - buf_seg, - buf_len, - pkt_len, - timeout, - status; - dword timetag; -}; - -struct Xmit_resp { - word buf_ofs, - buf_seg, - c_stat, - status; -}; - - -struct Netstat { - dword tot_recv, - tot_xmit; - word err_CRC, - err_align, - err_res, - err_ovrrun; -}; - - -struct Selftest { - word error; - union { - word ROM_cksum; - struct { - word ofs, seg; - } RAM; - word i82586; - } failure; -}; - -struct Info { - byte minor_vers, - major_vers; - word ROM_cksum, - RAM_sz, - free_ofs, - free_seg; -}; - -struct Memdump { - word size, - off, - seg; -}; - -/* -Primary Command Block. The most important data structure. All communication -between the host and the adapter is done with these. (Except for the actual -Ethernet data, which has different packaging.) -*/ -typedef struct { - byte command; - byte length; - union { - struct Memconf memconf; - word configure; - struct Rcv_pkt rcv_pkt; - struct Xmit_pkt xmit_pkt; - byte multicast[10][6]; - byte eth_addr[6]; - byte failed; - struct Rcv_resp rcv_resp; - struct Xmit_resp xmit_resp; - struct Netstat netstat; - struct Selftest selftest; - struct Info info; - struct Memdump memdump; - byte raw[62]; - } data; -} pcb_struct; - -/* These defines for 'configure' */ -#define RECV_STATION 0x00 -#define RECV_BROAD 0x01 -#define RECV_MULTI 0x02 -#define RECV_PROMISC 0x04 -#define NO_LOOPBACK 0x00 -#define INT_LOOPBACK 0x08 -#define EXT_LOOPBACK 0x10 - -/***************************************************************** - * - * structure to hold context information for adapter - * - *****************************************************************/ - -#define DMA_BUFFER_SIZE 1600 -#define BACKLOG_SIZE 4 - -typedef struct { - volatile short got[NUM_TRANSMIT_CMDS]; /* flags for - command completion */ - pcb_struct tx_pcb; /* PCB for foreground sending */ - pcb_struct rx_pcb; /* PCB for foreground receiving */ - pcb_struct itx_pcb; /* PCB for background sending */ - pcb_struct irx_pcb; /* PCB for background receiving */ - - void *dma_buffer; - - struct { - unsigned int length[BACKLOG_SIZE]; - unsigned int in; - unsigned int out; - } rx_backlog; - - struct { - unsigned int direction; - unsigned int length; - struct sk_buff *skb; - void *target; - unsigned long start_time; - } current_dma; - - /* flags */ - unsigned long send_pcb_semaphore; - unsigned long dmaing; - unsigned long busy; - - unsigned int rx_active; /* number of receive PCBs */ - volatile unsigned char hcr_val; /* what we think the HCR contains */ - spinlock_t lock; /* Interrupt v tx lock */ -} elp_device; diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c deleted file mode 100644 index 13983ee..0000000 --- a/drivers/net/ethernet/i825xx/3c507.c +++ /dev/null @@ -1,939 +0,0 @@ -/* 3c507.c: An EtherLink16 device driver for Linux. */ -/* - Written 1993,1994 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - Thanks go to jennings@Montrouge.SMR.slb.com ( Patrick Jennings) - and jrs@world.std.com (Rick Sladkey) for testing and bugfixes. - Mark Salazar made the changes for cards with - only 16K packet buffers. - - Things remaining to do: - Verify that the tx and rx buffers don't have fencepost errors. - Move the theory of operation and memory map documentation. - The statistics need to be updated correctly. -*/ - -#define DRV_NAME "3c507" -#define DRV_VERSION "1.10a" -#define DRV_RELDATE "11/17/2001" - -static const char version[] = - DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; - -/* - Sources: - This driver wouldn't have been written with the availability of the - Crynwr driver source code. It provided a known-working implementation - that filled in the gaping holes of the Intel documentation. Three cheers - for Russ Nelson. - - Intel Microcommunications Databook, Vol. 1, 1990. It provides just enough - info that the casual reader might think that it documents the i82586 :-<. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* use 0 for production, 1 for verification, 2..7 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; -#define debug net_debug - - -/* - Details of the i82586. - - You'll really need the databook to understand the details of this part, - but the outline is that the i82586 has two separate processing units. - Both are started from a list of three configuration tables, of which only - the last, the System Control Block (SCB), is used after reset-time. The SCB - has the following fields: - Status word - Command word - Tx/Command block addr. - Rx block addr. - The command word accepts the following controls for the Tx and Rx units: - */ - -#define CUC_START 0x0100 -#define CUC_RESUME 0x0200 -#define CUC_SUSPEND 0x0300 -#define RX_START 0x0010 -#define RX_RESUME 0x0020 -#define RX_SUSPEND 0x0030 - -/* The Rx unit uses a list of frame descriptors and a list of data buffer - descriptors. We use full-sized (1518 byte) data buffers, so there is - a one-to-one pairing of frame descriptors to buffer descriptors. - - The Tx ("command") unit executes a list of commands that look like: - Status word Written by the 82586 when the command is done. - Command word Command in lower 3 bits, post-command action in upper 3 - Link word The address of the next command. - Parameters (as needed). - - Some definitions related to the Command Word are: - */ -#define CMD_EOL 0x8000 /* The last command of the list, stop. */ -#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ -#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ - -enum commands { - CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3, - CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7}; - -/* Information that need to be kept for each board. */ -struct net_local { - int last_restart; - ushort rx_head; - ushort rx_tail; - ushort tx_head; - ushort tx_cmd_link; - ushort tx_reap; - ushort tx_pkts_in_ring; - spinlock_t lock; - void __iomem *base; -}; - -/* - Details of the EtherLink16 Implementation - The 3c507 is a generic shared-memory i82586 implementation. - The host can map 16K, 32K, 48K, or 64K of the 64K memory into - 0x0[CD][08]0000, or all 64K into 0xF[02468]0000. - */ - -/* Offsets from the base I/O address. */ -#define SA_DATA 0 /* Station address data, or 3Com signature. */ -#define MISC_CTRL 6 /* Switch the SA_DATA banks, and bus config bits. */ -#define RESET_IRQ 10 /* Reset the latched IRQ line. */ -#define SIGNAL_CA 11 /* Frob the 82586 Channel Attention line. */ -#define ROM_CONFIG 13 -#define MEM_CONFIG 14 -#define IRQ_CONFIG 15 -#define EL16_IO_EXTENT 16 - -/* The ID port is used at boot-time to locate the ethercard. */ -#define ID_PORT 0x100 - -/* Offsets to registers in the mailbox (SCB). */ -#define iSCB_STATUS 0x8 -#define iSCB_CMD 0xA -#define iSCB_CBL 0xC /* Command BLock offset. */ -#define iSCB_RFA 0xE /* Rx Frame Area offset. */ - -/* Since the 3c507 maps the shared memory window so that the last byte is - at 82586 address FFFF, the first byte is at 82586 address 0, 16K, 32K, or - 48K corresponding to window sizes of 64K, 48K, 32K and 16K respectively. - We can account for this be setting the 'SBC Base' entry in the ISCP table - below for all the 16 bit offset addresses, and also adding the 'SCB Base' - value to all 24 bit physical addresses (in the SCP table and the TX and RX - Buffer Descriptors). - -Mark - */ -#define SCB_BASE ((unsigned)64*1024 - (dev->mem_end - dev->mem_start)) - -/* - What follows in 'init_words[]' is the "program" that is downloaded to the - 82586 memory. It's mostly tables and command blocks, and starts at the - reset address 0xfffff6. This is designed to be similar to the EtherExpress, - thus the unusual location of the SCB at 0x0008. - - Even with the additional "don't care" values, doing it this way takes less - program space than initializing the individual tables, and I feel it's much - cleaner. - - The databook is particularly useless for the first two structures, I had - to use the Crynwr driver as an example. - - The memory setup is as follows: - */ - -#define CONFIG_CMD 0x0018 -#define SET_SA_CMD 0x0024 -#define SA_OFFSET 0x002A -#define IDLELOOP 0x30 -#define TDR_CMD 0x38 -#define TDR_TIME 0x3C -#define DUMP_CMD 0x40 -#define DIAG_CMD 0x48 -#define SET_MC_CMD 0x4E -#define DUMP_DATA 0x56 /* A 170 byte buffer for dump and Set-MC into. */ - -#define TX_BUF_START 0x0100 -#define NUM_TX_BUFS 5 -#define TX_BUF_SIZE (1518+14+20+16) /* packet+header+TBD */ - -#define RX_BUF_START 0x2000 -#define RX_BUF_SIZE (1518+14+18) /* packet+header+RBD */ -#define RX_BUF_END (dev->mem_end - dev->mem_start) - -#define TX_TIMEOUT (HZ/20) - -/* - That's it: only 86 bytes to set up the beast, including every extra - command available. The 170 byte buffer at DUMP_DATA is shared between the - Dump command (called only by the diagnostic program) and the SetMulticastList - command. - - To complete the memory setup you only have to write the station address at - SA_OFFSET and create the Tx & Rx buffer lists. - - The Tx command chain and buffer list is setup as follows: - A Tx command table, with the data buffer pointing to... - A Tx data buffer descriptor. The packet is in a single buffer, rather than - chaining together several smaller buffers. - A NoOp command, which initially points to itself, - And the packet data. - - A transmit is done by filling in the Tx command table and data buffer, - re-writing the NoOp command, and finally changing the offset of the last - command to point to the current Tx command. When the Tx command is finished, - it jumps to the NoOp, when it loops until the next Tx command changes the - "link offset" in the NoOp. This way the 82586 never has to go through the - slow restart sequence. - - The Rx buffer list is set up in the obvious ring structure. We have enough - memory (and low enough interrupt latency) that we can avoid the complicated - Rx buffer linked lists by alway associating a full-size Rx data buffer with - each Rx data frame. - - I current use four transmit buffers starting at TX_BUF_START (0x0100), and - use the rest of memory, from RX_BUF_START to RX_BUF_END, for Rx buffers. - - */ - -static unsigned short init_words[] = { - /* System Configuration Pointer (SCP). */ - 0x0000, /* Set bus size to 16 bits. */ - 0,0, /* pad words. */ - 0x0000,0x0000, /* ISCP phys addr, set in init_82586_mem(). */ - - /* Intermediate System Configuration Pointer (ISCP). */ - 0x0001, /* Status word that's cleared when init is done. */ - 0x0008,0,0, /* SCB offset, (skip, skip) */ - - /* System Control Block (SCB). */ - 0,0xf000|RX_START|CUC_START, /* SCB status and cmd. */ - CONFIG_CMD, /* Command list pointer, points to Configure. */ - RX_BUF_START, /* Rx block list. */ - 0,0,0,0, /* Error count: CRC, align, buffer, overrun. */ - - /* 0x0018: Configure command. Change to put MAC data with packet. */ - 0, CmdConfigure, /* Status, command. */ - SET_SA_CMD, /* Next command is Set Station Addr. */ - 0x0804, /* "4" bytes of config data, 8 byte FIFO. */ - 0x2e40, /* Magic values, including MAC data location. */ - 0, /* Unused pad word. */ - - /* 0x0024: Setup station address command. */ - 0, CmdSASetup, - SET_MC_CMD, /* Next command. */ - 0xaa00,0xb000,0x0bad, /* Station address (to be filled in) */ - - /* 0x0030: NOP, looping back to itself. Point to first Tx buffer to Tx. */ - 0, CmdNOp, IDLELOOP, 0 /* pad */, - - /* 0x0038: A unused Time-Domain Reflectometer command. */ - 0, CmdTDR, IDLELOOP, 0, - - /* 0x0040: An unused Dump State command. */ - 0, CmdDump, IDLELOOP, DUMP_DATA, - - /* 0x0048: An unused Diagnose command. */ - 0, CmdDiagnose, IDLELOOP, - - /* 0x004E: An empty set-multicast-list command. */ - 0, CmdMulticastList, IDLELOOP, 0, -}; - -/* Index to functions, as function prototypes. */ - -static int el16_probe1(struct net_device *dev, int ioaddr); -static int el16_open(struct net_device *dev); -static netdev_tx_t el16_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t el16_interrupt(int irq, void *dev_id); -static void el16_rx(struct net_device *dev); -static int el16_close(struct net_device *dev); -static void el16_tx_timeout (struct net_device *dev); - -static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad); -static void init_82586_mem(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; -static void init_rx_bufs(struct net_device *); - -static int io = 0x300; -static int irq; -static int mem_start; - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, (detachable devices only) allocate space for the - device and return success. - */ - -struct net_device * __init el16_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - static const unsigned ports[] = { 0x300, 0x320, 0x340, 0x280, 0}; - const unsigned *port; - int err = -ENODEV; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - mem_start = dev->mem_start & 15; - } - - if (io > 0x1ff) /* Check a single specified location. */ - err = el16_probe1(dev, io); - else if (io != 0) - err = -ENXIO; /* Don't probe at all. */ - else { - for (port = ports; *port; port++) { - err = el16_probe1(dev, *port); - if (!err) - break; - } - } - - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - free_irq(dev->irq, dev); - iounmap(((struct net_local *)netdev_priv(dev))->base); - release_region(dev->base_addr, EL16_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops netdev_ops = { - .ndo_open = el16_open, - .ndo_stop = el16_close, - .ndo_start_xmit = el16_send_packet, - .ndo_tx_timeout = el16_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init el16_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned char init_ID_done; - int i, irq, irqval, retval; - struct net_local *lp; - - if (init_ID_done == 0) { - ushort lrs_state = 0xff; - /* Send the ID sequence to the ID_PORT to enable the board(s). */ - outb(0x00, ID_PORT); - for(i = 0; i < 255; i++) { - outb(lrs_state, ID_PORT); - lrs_state <<= 1; - if (lrs_state & 0x100) - lrs_state ^= 0xe7; - } - outb(0x00, ID_PORT); - init_ID_done = 1; - } - - if (!request_region(ioaddr, EL16_IO_EXTENT, DRV_NAME)) - return -ENODEV; - - if ((inb(ioaddr) != '*') || (inb(ioaddr + 1) != '3') || - (inb(ioaddr + 2) != 'C') || (inb(ioaddr + 3) != 'O')) { - retval = -ENODEV; - goto out; - } - - pr_info("%s: 3c507 at %#x,", dev->name, ioaddr); - - /* We should make a few more checks here, like the first three octets of - the S.A. for the manufacturer's code. */ - - irq = inb(ioaddr + IRQ_CONFIG) & 0x0f; - - irqval = request_irq(irq, el16_interrupt, 0, DRV_NAME, dev); - if (irqval) { - pr_cont("\n"); - pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval); - retval = -EAGAIN; - goto out; - } - - /* We've committed to using the board, and can start filling in *dev. */ - dev->base_addr = ioaddr; - - outb(0x01, ioaddr + MISC_CTRL); - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); - pr_cont(" %pM", dev->dev_addr); - - if (mem_start) - net_debug = mem_start & 7; - -#ifdef MEM_BASE - dev->mem_start = MEM_BASE; - dev->mem_end = dev->mem_start + 0x10000; -#else - { - int base; - int size; - char mem_config = inb(ioaddr + MEM_CONFIG); - if (mem_config & 0x20) { - size = 64*1024; - base = 0xf00000 + (mem_config & 0x08 ? 0x080000 - : ((mem_config & 3) << 17)); - } else { - size = ((mem_config & 3) + 1) << 14; - base = 0x0c0000 + ( (mem_config & 0x18) << 12); - } - dev->mem_start = base; - dev->mem_end = base + size; - } -#endif - - dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0; - dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f; - - pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq, - dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1); - - if (net_debug) - pr_debug("%s", version); - - lp = netdev_priv(dev); - spin_lock_init(&lp->lock); - lp->base = ioremap(dev->mem_start, RX_BUF_END); - if (!lp->base) { - pr_err("3c507: unable to remap memory\n"); - retval = -EAGAIN; - goto out1; - } - - dev->netdev_ops = &netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - dev->ethtool_ops = &netdev_ethtool_ops; - dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */ - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, EL16_IO_EXTENT); - return retval; -} - -static int el16_open(struct net_device *dev) -{ - /* Initialize the 82586 memory and start it. */ - init_82586_mem(dev); - - netif_start_queue(dev); - return 0; -} - - -static void el16_tx_timeout (struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - if (net_debug > 1) - pr_debug("%s: transmit timed out, %s? ", dev->name, - readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" : - "network cable problem"); - /* Try to restart the adaptor. */ - if (lp->last_restart == dev->stats.tx_packets) { - if (net_debug > 1) - pr_cont("Resetting board.\n"); - /* Completely reset the adaptor. */ - init_82586_mem (dev); - lp->tx_pkts_in_ring = 0; - } else { - /* Issue the channel attention signal and hope it "gets better". */ - if (net_debug > 1) - pr_cont("Kicking board.\n"); - writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD); - outb (0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ - lp->last_restart = dev->stats.tx_packets; - } - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue (dev); -} - - -static netdev_tx_t el16_send_packet (struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - unsigned char *buf = skb->data; - - netif_stop_queue (dev); - - spin_lock_irqsave (&lp->lock, flags); - - dev->stats.tx_bytes += length; - /* Disable the 82586's input to the interrupt line. */ - outb (0x80, ioaddr + MISC_CTRL); - - hardware_send_packet (dev, buf, skb->len, length - skb->len); - - /* Enable the 82586 interrupt input. */ - outb (0x84, ioaddr + MISC_CTRL); - - spin_unlock_irqrestore (&lp->lock, flags); - - dev_kfree_skb (skb); - - /* You might need to clean up and record Tx statistics here. */ - - return NETDEV_TX_OK; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t el16_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status, boguscount = 0; - ushort ack_cmd = 0; - void __iomem *shmem; - - if (dev == NULL) { - pr_err("net_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - shmem = lp->base; - - spin_lock(&lp->lock); - - status = readw(shmem+iSCB_STATUS); - - if (net_debug > 4) { - pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status); - } - - /* Disable the 82586's input to the interrupt line. */ - outb(0x80, ioaddr + MISC_CTRL); - - /* Reap the Tx packet buffers. */ - while (lp->tx_pkts_in_ring) { - unsigned short tx_status = readw(shmem+lp->tx_reap); - if (!(tx_status & 0x8000)) { - if (net_debug > 5) - pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap); - break; - } - /* Tx unsuccessful or some interesting status bit set. */ - if (!(tx_status & 0x2000) || (tx_status & 0x0f3f)) { - dev->stats.tx_errors++; - if (tx_status & 0x0600) dev->stats.tx_carrier_errors++; - if (tx_status & 0x0100) dev->stats.tx_fifo_errors++; - if (!(tx_status & 0x0040)) dev->stats.tx_heartbeat_errors++; - if (tx_status & 0x0020) dev->stats.tx_aborted_errors++; - dev->stats.collisions += tx_status & 0xf; - } - dev->stats.tx_packets++; - if (net_debug > 5) - pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status); - lp->tx_reap += TX_BUF_SIZE; - if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE) - lp->tx_reap = TX_BUF_START; - - lp->tx_pkts_in_ring--; - /* There is always more space in the Tx ring buffer now. */ - netif_wake_queue(dev); - - if (++boguscount > 10) - break; - } - - if (status & 0x4000) { /* Packet received. */ - if (net_debug > 5) - pr_debug("Received packet, rx_head %04x.\n", lp->rx_head); - el16_rx(dev); - } - - /* Acknowledge the interrupt sources. */ - ack_cmd = status & 0xf000; - - if ((status & 0x0700) != 0x0200 && netif_running(dev)) { - if (net_debug) - pr_debug("%s: Command unit stopped, status %04x, restarting.\n", - dev->name, status); - /* If this ever occurs we should really re-write the idle loop, reset - the Tx list, and do a complete restart of the command unit. - For now we rely on the Tx timeout if the resume doesn't work. */ - ack_cmd |= CUC_RESUME; - } - - if ((status & 0x0070) != 0x0040 && netif_running(dev)) { - /* The Rx unit is not ready, it must be hung. Restart the receiver by - initializing the rx buffers, and issuing an Rx start command. */ - if (net_debug) - pr_debug("%s: Rx unit stopped, status %04x, restarting.\n", - dev->name, status); - init_rx_bufs(dev); - writew(RX_BUF_START,shmem+iSCB_RFA); - ack_cmd |= RX_START; - } - - writew(ack_cmd,shmem+iSCB_CMD); - outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ - - /* Clear the latched interrupt. */ - outb(0, ioaddr + RESET_IRQ); - - /* Enable the 82586's interrupt input. */ - outb(0x84, ioaddr + MISC_CTRL); - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -static int el16_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - netif_stop_queue(dev); - - /* Flush the Tx and disable Rx. */ - writew(RX_SUSPEND | CUC_SUSPEND,shmem+iSCB_CMD); - outb(0, ioaddr + SIGNAL_CA); - - /* Disable the 82586's input to the interrupt line. */ - outb(0x80, ioaddr + MISC_CTRL); - - /* We always physically use the IRQ line, so we don't do free_irq(). */ - - /* Update the statistics here. */ - - return 0; -} - -/* Initialize the Rx-block list. */ -static void init_rx_bufs(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - void __iomem *write_ptr; - unsigned short SCB_base = SCB_BASE; - - int cur_rxbuf = lp->rx_head = RX_BUF_START; - - /* Initialize each Rx frame + data buffer. */ - do { /* While there is room for one more. */ - - write_ptr = lp->base + cur_rxbuf; - - writew(0x0000,write_ptr); /* Status */ - writew(0x0000,write_ptr+=2); /* Command */ - writew(cur_rxbuf + RX_BUF_SIZE,write_ptr+=2); /* Link */ - writew(cur_rxbuf + 22,write_ptr+=2); /* Buffer offset */ - writew(0x0000,write_ptr+=2); /* Pad for dest addr. */ - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); /* Pad for source addr. */ - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); /* Pad for protocol. */ - - writew(0x0000,write_ptr+=2); /* Buffer: Actual count */ - writew(-1,write_ptr+=2); /* Buffer: Next (none). */ - writew(cur_rxbuf + 0x20 + SCB_base,write_ptr+=2);/* Buffer: Address low */ - writew(0x0000,write_ptr+=2); - /* Finally, the number of bytes in the buffer. */ - writew(0x8000 + RX_BUF_SIZE-0x20,write_ptr+=2); - - lp->rx_tail = cur_rxbuf; - cur_rxbuf += RX_BUF_SIZE; - } while (cur_rxbuf <= RX_BUF_END - RX_BUF_SIZE); - - /* Terminate the list by setting the EOL bit, and wrap the pointer to make - the list a ring. */ - write_ptr = lp->base + lp->rx_tail + 2; - writew(0xC000,write_ptr); /* Command, mark as last. */ - writew(lp->rx_head,write_ptr+2); /* Link */ -} - -static void init_82586_mem(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - /* Enable loopback to protect the wire while starting up, - and hold the 586 in reset during the memory initialization. */ - outb(0x20, ioaddr + MISC_CTRL); - - /* Fix the ISCP address and base. */ - init_words[3] = SCB_BASE; - init_words[7] = SCB_BASE; - - /* Write the words at 0xfff6 (address-aliased to 0xfffff6). */ - memcpy_toio(lp->base + RX_BUF_END - 10, init_words, 10); - - /* Write the words at 0x0000. */ - memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10); - - /* Fill in the station address. */ - memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN); - - /* The Tx-block list is written as needed. We just set up the values. */ - lp->tx_cmd_link = IDLELOOP + 4; - lp->tx_head = lp->tx_reap = TX_BUF_START; - - init_rx_bufs(dev); - - /* Start the 586 by releasing the reset line, but leave loopback. */ - outb(0xA0, ioaddr + MISC_CTRL); - - /* This was time consuming to track down: you need to give two channel - attention signals to reliably start up the i82586. */ - outb(0, ioaddr + SIGNAL_CA); - - { - int boguscnt = 50; - while (readw(shmem+iSCB_STATUS) == 0) - if (--boguscnt == 0) { - pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n", - dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD)); - break; - } - /* Issue channel-attn -- the 82586 won't start. */ - outb(0, ioaddr + SIGNAL_CA); - } - - /* Disable loopback and enable interrupts. */ - outb(0x84, ioaddr + MISC_CTRL); - if (net_debug > 4) - pr_debug("%s: Initialized 82586, status %04x.\n", dev->name, - readw(shmem+iSCB_STATUS)); -} - -static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad) -{ - struct net_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - ushort tx_block = lp->tx_head; - void __iomem *write_ptr = lp->base + tx_block; - static char padding[ETH_ZLEN]; - - /* Set the write pointer to the Tx block, and put out the header. */ - writew(0x0000,write_ptr); /* Tx status */ - writew(CMD_INTR|CmdTx,write_ptr+=2); /* Tx command */ - writew(tx_block+16,write_ptr+=2); /* Next command is a NoOp. */ - writew(tx_block+8,write_ptr+=2); /* Data Buffer offset. */ - - /* Output the data buffer descriptor. */ - writew((pad + length) | 0x8000,write_ptr+=2); /* Byte count parameter. */ - writew(-1,write_ptr+=2); /* No next data buffer. */ - writew(tx_block+22+SCB_BASE,write_ptr+=2); /* Buffer follows the NoOp command. */ - writew(0x0000,write_ptr+=2); /* Buffer address high bits (always zero). */ - - /* Output the Loop-back NoOp command. */ - writew(0x0000,write_ptr+=2); /* Tx status */ - writew(CmdNOp,write_ptr+=2); /* Tx command */ - writew(tx_block+16,write_ptr+=2); /* Next is myself. */ - - /* Output the packet at the write pointer. */ - memcpy_toio(write_ptr+2, buf, length); - if (pad) - memcpy_toio(write_ptr+length+2, padding, pad); - - /* Set the old command link pointing to this send packet. */ - writew(tx_block,lp->base + lp->tx_cmd_link); - lp->tx_cmd_link = tx_block + 20; - - /* Set the next free tx region. */ - lp->tx_head = tx_block + TX_BUF_SIZE; - if (lp->tx_head > RX_BUF_START - TX_BUF_SIZE) - lp->tx_head = TX_BUF_START; - - if (net_debug > 4) { - pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n", - dev->name, ioaddr, length, tx_block, lp->tx_head); - } - - /* Grimly block further packets if there has been insufficient reaping. */ - if (++lp->tx_pkts_in_ring < NUM_TX_BUFS) - netif_wake_queue(dev); -} - -static void el16_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - void __iomem *shmem = lp->base; - ushort rx_head = lp->rx_head; - ushort rx_tail = lp->rx_tail; - ushort boguscount = 10; - short frame_status; - - while ((frame_status = readw(shmem+rx_head)) < 0) { /* Command complete */ - void __iomem *read_frame = lp->base + rx_head; - ushort rfd_cmd = readw(read_frame+2); - ushort next_rx_frame = readw(read_frame+4); - ushort data_buffer_addr = readw(read_frame+6); - void __iomem *data_frame = lp->base + data_buffer_addr; - ushort pkt_len = readw(data_frame); - - if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22 || - (pkt_len & 0xC000) != 0xC000) { - pr_err("%s: Rx frame at %#x corrupted, " - "status %04x cmd %04x next %04x " - "data-buf @%04x %04x.\n", - dev->name, rx_head, frame_status, rfd_cmd, - next_rx_frame, data_buffer_addr, pkt_len); - } else if ((frame_status & 0x2000) == 0) { - /* Frame Rxed, but with error. */ - dev->stats.rx_errors++; - if (frame_status & 0x0800) dev->stats.rx_crc_errors++; - if (frame_status & 0x0400) dev->stats.rx_frame_errors++; - if (frame_status & 0x0200) dev->stats.rx_fifo_errors++; - if (frame_status & 0x0100) dev->stats.rx_over_errors++; - if (frame_status & 0x0080) dev->stats.rx_length_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - pkt_len &= 0x3fff; - skb = netdev_alloc_skb(dev, pkt_len + 2); - if (skb == NULL) { - pr_err("%s: Memory squeeze, dropping packet.\n", - dev->name); - dev->stats.rx_dropped++; - break; - } - - skb_reserve(skb,2); - - /* 'skb->data' points to the start of sk_buff data area. */ - memcpy_fromio(skb_put(skb,pkt_len), data_frame + 10, pkt_len); - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - - /* Clear the status word and set End-of-List on the rx frame. */ - writew(0,read_frame); - writew(0xC000,read_frame+2); - /* Clear the end-of-list on the prev. RFD. */ - writew(0x0000,lp->base + rx_tail + 2); - - rx_tail = rx_head; - rx_head = next_rx_frame; - if (--boguscount == 0) - break; - } - - lp->rx_head = rx_head; - lp->rx_tail = rx_tail; -} - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE -static struct net_device *dev_3c507; -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "EtherLink16 I/O base address"); -MODULE_PARM_DESC(irq, "(ignored)"); - -int __init init_module(void) -{ - if (io == 0) - pr_notice("3c507: You should not use auto-probing with insmod!\n"); - dev_3c507 = el16_probe(-1); - return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0; -} - -void __exit -cleanup_module(void) -{ - struct net_device *dev = dev_3c507; - unregister_netdev(dev); - free_irq(dev->irq, dev); - iounmap(((struct net_local *)netdev_priv(dev))->base); - release_region(dev->base_addr, EL16_IO_EXTENT); - free_netdev(dev); -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 46edb81..b800a94 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -20,29 +20,6 @@ config NET_VENDOR_I825XX if NET_VENDOR_I825XX -config ELPLUS - tristate "3c505 \"EtherLink Plus\" support" - depends on ISA && ISA_DMA_API - ---help--- - Information about this network (Ethernet) card can be found in - . If you have a card of - this type, say Y and read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called 3c505. - -config EL16 - tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" - depends on ISA && EXPERIMENTAL - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called 3c507. - config ARM_ETHER1 tristate "Acorn Ether1 support" depends on ARM && ARCH_ACORN diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index 4f01584..bc81e14 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -5,8 +5,6 @@ obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_EEXPRESS) += eexpress.o obj-$(CONFIG_EEXPRESS_PRO) += eepro.o -obj-$(CONFIG_ELPLUS) += 3c505.o -obj-$(CONFIG_EL16) += 3c507.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o obj-$(CONFIG_ZNET) += znet.o -- cgit v0.10.2 From f84932d8313af16a37cf25412b7d9054d01d3bea Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 9 Jan 2013 21:01:40 -0500 Subject: drivers/net: delete ISA intel eexpress and eepro i825xx drivers These old drivers should not be confused with the very common PCI cards that are supported by e100.c -- these older 10Mbit ISA only drivers were not as commonly used as some of the other ISA drivers, simply due to hardware availability and pricing. Given the rarity of the hardware, and the subsequent less extensive use of the drivers, it makes sense to obsolete them at this point in time, along with other rare/experimental ISA drivers. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index ac66a6a..726b17b 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -44,8 +44,6 @@ extern struct net_device *el2_probe(int unit); extern struct net_device *ne_probe(int unit); extern struct net_device *hp_probe(int unit); extern struct net_device *hp_plus_probe(int unit); -extern struct net_device *express_probe(int unit); -extern struct net_device *eepro_probe(int unit); extern struct net_device *at1700_probe(int unit); extern struct net_device *fmv18x_probe(int unit); extern struct net_device *eth16i_probe(int unit); @@ -150,12 +148,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_ETH16I {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ #endif -#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */ - {express_probe, 0}, -#endif -#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */ - {eepro_probe, 0}, -#endif #ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ {ewrk3_probe, 0}, #endif diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index b800a94..16b14a9 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -36,33 +36,6 @@ config BVME6000_NET in your kernel. To compile this driver as a module, choose M here. -config EEXPRESS - tristate "EtherExpress 16 support" - depends on ISA - ---help--- - If you have an EtherExpress16 network (Ethernet) card, say Y and - read the Ethernet-HOWTO, available from - . Note that the Intel - EtherExpress16 card used to be regarded as a very poor choice - because the driver was very unreliable. We now have a new driver - that should do better. - - To compile this driver as a module, choose M here. The module - will be called eexpress. - -config EEXPRESS_PRO - tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y. This - driver supports Intel i82595{FX,TX} based boards. Note however - that the EtherExpress PRO/100 Ethernet card has its own separate - driver. Please read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called eepro. - config LASI_82596 tristate "Lasi ethernet" depends on GSC diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index bc81e14..4267ae7 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -3,8 +3,6 @@ # obj-$(CONFIG_ARM_ETHER1) += ether1.o -obj-$(CONFIG_EEXPRESS) += eexpress.o -obj-$(CONFIG_EEXPRESS_PRO) += eepro.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o obj-$(CONFIG_ZNET) += znet.o diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c deleted file mode 100644 index 7f49fd5..0000000 --- a/drivers/net/ethernet/i825xx/eepro.c +++ /dev/null @@ -1,1822 +0,0 @@ -/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */ -/* - Written 1994, 1995,1996 by Bao C. Ha. - - Copyright (C) 1994, 1995,1996 by Bao C. Ha. - - This software may be used and distributed - according to the terms of the GNU General Public License, - incorporated herein by reference. - - The author may be reached at bao.ha@srs.gov - or 418 Hastings Place, Martinez, GA 30907. - - Things remaining to do: - Better record keeping of errors. - Eliminate transmit interrupt to reduce overhead. - Implement "concurrent processing". I won't be doing it! - - Bugs: - - If you have a problem of not detecting the 82595 during a - reboot (warm reset), disable the FLASH memory should fix it. - This is a compatibility hardware problem. - - Versions: - 0.13b basic ethtool support (aris, 09/13/2004) - 0.13a in memory shortage, drop packets also in board - (Michael Westermann , 07/30/2002) - 0.13 irq sharing, rewrote probe function, fixed a nasty bug in - hardware_send_packet and a major cleanup (aris, 11/08/2001) - 0.12d fixing a problem with single card detected as eight eth devices - fixing a problem with sudden drop in card performance - (chris (asdn@go2.pl), 10/29/2001) - 0.12c fixing some problems with old cards (aris, 01/08/2001) - 0.12b misc fixes (aris, 06/26/2000) - 0.12a port of version 0.12a of 2.2.x kernels to 2.3.x - (aris (aris@conectiva.com.br), 05/19/2000) - 0.11e some tweaks about multiple cards support (PdP, jul/aug 1999) - 0.11d added __initdata, __init stuff; call spin_lock_init - in eepro_probe1. Replaced "eepro" by dev->name. Augmented - the code protected by spin_lock in interrupt routine - (PdP, 12/12/1998) - 0.11c minor cleanup (PdP, RMC, 09/12/1998) - 0.11b Pascal Dupuis (dupuis@lei.ucl.ac.be): works as a module - under 2.1.xx. Debug messages are flagged as KERN_DEBUG to - avoid console flooding. Added locking at critical parts. Now - the dawn thing is SMP safe. - 0.11a Attempt to get 2.1.xx support up (RMC) - 0.11 Brian Candler added support for multiple cards. Tested as - a module, no idea if it works when compiled into kernel. - - 0.10e Rick Bressler notified me that ifconfig up;ifconfig down fails - because the irq is lost somewhere. Fixed that by moving - request_irq and free_irq to eepro_open and eepro_close respectively. - 0.10d Ugh! Now Wakeup works. Was seriously broken in my first attempt. - I'll need to find a way to specify an ioport other than - the default one in the PnP case. PnP definitively sucks. - And, yes, this is not the only reason. - 0.10c PnP Wakeup Test for 595FX. uncomment #define PnPWakeup; - to use. - 0.10b Should work now with (some) Pro/10+. At least for - me (and my two cards) it does. _No_ guarantee for - function with non-Pro/10+ cards! (don't have any) - (RMC, 9/11/96) - - 0.10 Added support for the Etherexpress Pro/10+. The - IRQ map was changed significantly from the old - pro/10. The new interrupt map was provided by - Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu). - (BCH, 9/3/96) - - 0.09 Fixed a race condition in the transmit algorithm, - which causes crashes under heavy load with fast - pentium computers. The performance should also - improve a bit. The size of RX buffer, and hence - TX buffer, can also be changed via lilo or insmod. - (BCH, 7/31/96) - - 0.08 Implement 32-bit I/O for the 82595TX and 82595FX - based lan cards. Disable full-duplex mode if TPE - is not used. (BCH, 4/8/96) - - 0.07a Fix a stat report which counts every packet as a - heart-beat failure. (BCH, 6/3/95) - - 0.07 Modified to support all other 82595-based lan cards. - The IRQ vector of the EtherExpress Pro will be set - according to the value saved in the EEPROM. For other - cards, I will do autoirq_request() to grab the next - available interrupt vector. (BCH, 3/17/95) - - 0.06a,b Interim released. Minor changes in the comments and - print out format. (BCH, 3/9/95 and 3/14/95) - - 0.06 First stable release that I am comfortable with. (BCH, - 3/2/95) - - 0.05 Complete testing of multicast. (BCH, 2/23/95) - - 0.04 Adding multicast support. (BCH, 2/14/95) - - 0.03 First widely alpha release for public testing. - (BCH, 2/14/95) - -*/ - -static const char version[] = - "eepro.c: v0.13b 09/13/2004 aris@cathedrallabs.org\n"; - -#include - -/* - Sources: - - This driver wouldn't have been written without the availability - of the Crynwr's Lan595 driver source code. It helps me to - familiarize with the 82595 chipset while waiting for the Intel - documentation. I also learned how to detect the 82595 using - the packet driver's technique. - - This driver is written by cutting and pasting the skeleton.c driver - provided by Donald Becker. I also borrowed the EEPROM routine from - Donald Becker's 82586 driver. - - Datasheet for the Intel 82595 (including the TX and FX version). It - provides just enough info that the casual reader might think that it - documents the i82595. - - The User Manual for the 82595. It provides a lot of the missing - information. - -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "eepro" -#define DRV_VERSION "0.13c" - -#define compat_dev_kfree_skb( skb, mode ) dev_kfree_skb( (skb) ) -/* I had reports of looong delays with SLOW_DOWN defined as udelay(2) */ -#define SLOW_DOWN inb(0x80) -/* udelay(2) */ -#define compat_init_data __initdata -enum iftype { AUI=0, BNC=1, TPE=2 }; - -/* First, a few definitions that the brave might change. */ -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int eepro_portlist[] compat_init_data = - { 0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0}; -/* note: 0x300 is default, the 595FX supports ALL IO Ports - from 0x000 to 0x3F0, some of which are reserved in PCs */ - -/* To try the (not-really PnP Wakeup: */ -/* -#define PnPWakeup -*/ - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 0 -#endif -static unsigned int net_debug = NET_DEBUG; - -/* The number of low I/O ports used by the ethercard. */ -#define EEPRO_IO_EXTENT 16 - -/* Different 82595 chips */ -#define LAN595 0 -#define LAN595TX 1 -#define LAN595FX 2 -#define LAN595FX_10ISA 3 - -/* Information that need to be kept for each board. */ -struct eepro_local { - unsigned rx_start; - unsigned tx_start; /* start of the transmit chain */ - int tx_last; /* pointer to last packet in the transmit chain */ - unsigned tx_end; /* end of the transmit chain (plus 1) */ - int eepro; /* 1 for the EtherExpress Pro/10, - 2 for the EtherExpress Pro/10+, - 3 for the EtherExpress 10 (blue cards), - 0 for other 82595-based lan cards. */ - int version; /* a flag to indicate if this is a TX or FX - version of the 82595 chip. */ - int stepping; - - spinlock_t lock; /* Serializing lock */ - - unsigned rcv_ram; /* pre-calculated space for rx */ - unsigned xmt_ram; /* pre-calculated space for tx */ - unsigned char xmt_bar; - unsigned char xmt_lower_limit_reg; - unsigned char xmt_upper_limit_reg; - short xmt_lower_limit; - short xmt_upper_limit; - short rcv_lower_limit; - short rcv_upper_limit; - unsigned char eeprom_reg; - unsigned short word[8]; -}; - -/* The station (ethernet) address prefix, used for IDing the board. */ -#define SA_ADDR0 0x00 /* Etherexpress Pro/10 */ -#define SA_ADDR1 0xaa -#define SA_ADDR2 0x00 - -#define GetBit(x,y) ((x & (1<>y) - -/* EEPROM Word 0: */ -#define ee_PnP 0 /* Plug 'n Play enable bit */ -#define ee_Word1 1 /* Word 1? */ -#define ee_BusWidth 2 /* 8/16 bit */ -#define ee_FlashAddr 3 /* Flash Address */ -#define ee_FlashMask 0x7 /* Mask */ -#define ee_AutoIO 6 /* */ -#define ee_reserved0 7 /* =0! */ -#define ee_Flash 8 /* Flash there? */ -#define ee_AutoNeg 9 /* Auto Negotiation enabled? */ -#define ee_IO0 10 /* IO Address LSB */ -#define ee_IO0Mask 0x /*...*/ -#define ee_IO1 15 /* IO MSB */ - -/* EEPROM Word 1: */ -#define ee_IntSel 0 /* Interrupt */ -#define ee_IntMask 0x7 -#define ee_LI 3 /* Link Integrity 0= enabled */ -#define ee_PC 4 /* Polarity Correction 0= enabled */ -#define ee_TPE_AUI 5 /* PortSelection 1=TPE */ -#define ee_Jabber 6 /* Jabber prevention 0= enabled */ -#define ee_AutoPort 7 /* Auto Port Selection 1= Disabled */ -#define ee_SMOUT 8 /* SMout Pin Control 0= Input */ -#define ee_PROM 9 /* Flash EPROM / PROM 0=Flash */ -#define ee_reserved1 10 /* .. 12 =0! */ -#define ee_AltReady 13 /* Alternate Ready, 0=normal */ -#define ee_reserved2 14 /* =0! */ -#define ee_Duplex 15 - -/* Word2,3,4: */ -#define ee_IA5 0 /*bit start for individual Addr Byte 5 */ -#define ee_IA4 8 /*bit start for individual Addr Byte 5 */ -#define ee_IA3 0 /*bit start for individual Addr Byte 5 */ -#define ee_IA2 8 /*bit start for individual Addr Byte 5 */ -#define ee_IA1 0 /*bit start for individual Addr Byte 5 */ -#define ee_IA0 8 /*bit start for individual Addr Byte 5 */ - -/* Word 5: */ -#define ee_BNC_TPE 0 /* 0=TPE */ -#define ee_BootType 1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */ -#define ee_BootTypeMask 0x3 -#define ee_NumConn 3 /* Number of Connections 0= One or Two */ -#define ee_FlashSock 4 /* Presence of Flash Socket 0= Present */ -#define ee_PortTPE 5 -#define ee_PortBNC 6 -#define ee_PortAUI 7 -#define ee_PowerMgt 10 /* 0= disabled */ -#define ee_CP 13 /* Concurrent Processing */ -#define ee_CPMask 0x7 - -/* Word 6: */ -#define ee_Stepping 0 /* Stepping info */ -#define ee_StepMask 0x0F -#define ee_BoardID 4 /* Manucaturer Board ID, reserved */ -#define ee_BoardMask 0x0FFF - -/* Word 7: */ -#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping = 0x1EB8 for Pro/10+ */ -#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */ - -/*..*/ -#define ee_SIZE 0x40 /* total EEprom Size */ -#define ee_Checksum 0xBABA /* initial and final value for adding checksum */ - - -/* Card identification via EEprom: */ -#define ee_addr_vendor 0x10 /* Word offset for EISA Vendor ID */ -#define ee_addr_id 0x11 /* Word offset for Card ID */ -#define ee_addr_SN 0x12 /* Serial Number */ -#define ee_addr_CRC_8 0x14 /* CRC over last thee Bytes */ - - -#define ee_vendor_intel0 0x25 /* Vendor ID Intel */ -#define ee_vendor_intel1 0xD4 -#define ee_id_eepro10p0 0x10 /* ID for eepro/10+ */ -#define ee_id_eepro10p1 0x31 - -#define TX_TIMEOUT ((4*HZ)/10) - -/* Index to functions, as function prototypes. */ - -static int eepro_probe1(struct net_device *dev, int autoprobe); -static int eepro_open(struct net_device *dev); -static netdev_tx_t eepro_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t eepro_interrupt(int irq, void *dev_id); -static void eepro_rx(struct net_device *dev); -static void eepro_transmit_interrupt(struct net_device *dev); -static int eepro_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void eepro_tx_timeout (struct net_device *dev); - -static int read_eeprom(int ioaddr, int location, struct net_device *dev); -static int hardware_send_packet(struct net_device *dev, void *buf, short length); -static int eepro_grab_irq(struct net_device *dev); - -/* - Details of the i82595. - -You will need either the datasheet or the user manual to understand what -is going on here. The 82595 is very different from the 82586, 82593. - -The receive algorithm in eepro_rx() is just an implementation of the -RCV ring structure that the Intel 82595 imposes at the hardware level. -The receive buffer is set at 24K, and the transmit buffer is 8K. I -am assuming that the total buffer memory is 32K, which is true for the -Intel EtherExpress Pro/10. If it is less than that on a generic card, -the driver will be broken. - -The transmit algorithm in the hardware_send_packet() is similar to the -one in the eepro_rx(). The transmit buffer is a ring linked list. -I just queue the next available packet to the end of the list. In my -system, the 82595 is so fast that the list seems to always contain a -single packet. In other systems with faster computers and more congested -network traffics, the ring linked list should improve performance by -allowing up to 8K worth of packets to be queued. - -The sizes of the receive and transmit buffers can now be changed via lilo -or insmod. Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0" -where rx-buffer is in KB unit. Modules uses the parameter mem which is -also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer." -The receive buffer has to be more than 3K or less than 29K. Otherwise, -it is reset to the default of 24K, and, hence, 8K for the trasnmit -buffer (transmit-buffer = 32K - receive-buffer). - -*/ -#define RAM_SIZE 0x8000 - -#define RCV_HEADER 8 -#define RCV_DEFAULT_RAM 0x6000 - -#define XMT_HEADER 8 -#define XMT_DEFAULT_RAM (RAM_SIZE - RCV_DEFAULT_RAM) - -#define XMT_START_PRO RCV_DEFAULT_RAM -#define XMT_START_10 0x0000 -#define RCV_START_PRO 0x0000 -#define RCV_START_10 XMT_DEFAULT_RAM - -#define RCV_DONE 0x0008 -#define RX_OK 0x2000 -#define RX_ERROR 0x0d81 - -#define TX_DONE_BIT 0x0080 -#define TX_OK 0x2000 -#define CHAIN_BIT 0x8000 -#define XMT_STATUS 0x02 -#define XMT_CHAIN 0x04 -#define XMT_COUNT 0x06 - -#define BANK0_SELECT 0x00 -#define BANK1_SELECT 0x40 -#define BANK2_SELECT 0x80 - -/* Bank 0 registers */ -#define COMMAND_REG 0x00 /* Register 0 */ -#define MC_SETUP 0x03 -#define XMT_CMD 0x04 -#define DIAGNOSE_CMD 0x07 -#define RCV_ENABLE_CMD 0x08 -#define RCV_DISABLE_CMD 0x0a -#define STOP_RCV_CMD 0x0b -#define RESET_CMD 0x0e -#define POWER_DOWN_CMD 0x18 -#define RESUME_XMT_CMD 0x1c -#define SEL_RESET_CMD 0x1e -#define STATUS_REG 0x01 /* Register 1 */ -#define RX_INT 0x02 -#define TX_INT 0x04 -#define EXEC_STATUS 0x30 -#define ID_REG 0x02 /* Register 2 */ -#define R_ROBIN_BITS 0xc0 /* round robin counter */ -#define ID_REG_MASK 0x2c -#define ID_REG_SIG 0x24 -#define AUTO_ENABLE 0x10 -#define INT_MASK_REG 0x03 /* Register 3 */ -#define RX_STOP_MASK 0x01 -#define RX_MASK 0x02 -#define TX_MASK 0x04 -#define EXEC_MASK 0x08 -#define ALL_MASK 0x0f -#define IO_32_BIT 0x10 -#define RCV_BAR 0x04 /* The following are word (16-bit) registers */ -#define RCV_STOP 0x06 - -#define XMT_BAR_PRO 0x0a -#define XMT_BAR_10 0x0b - -#define HOST_ADDRESS_REG 0x0c -#define IO_PORT 0x0e -#define IO_PORT_32_BIT 0x0c - -/* Bank 1 registers */ -#define REG1 0x01 -#define WORD_WIDTH 0x02 -#define INT_ENABLE 0x80 -#define INT_NO_REG 0x02 -#define RCV_LOWER_LIMIT_REG 0x08 -#define RCV_UPPER_LIMIT_REG 0x09 - -#define XMT_LOWER_LIMIT_REG_PRO 0x0a -#define XMT_UPPER_LIMIT_REG_PRO 0x0b -#define XMT_LOWER_LIMIT_REG_10 0x0b -#define XMT_UPPER_LIMIT_REG_10 0x0a - -/* Bank 2 registers */ -#define XMT_Chain_Int 0x20 /* Interrupt at the end of the transmit chain */ -#define XMT_Chain_ErrStop 0x40 /* Interrupt at the end of the chain even if there are errors */ -#define RCV_Discard_BadFrame 0x80 /* Throw bad frames away, and continue to receive others */ -#define REG2 0x02 -#define PRMSC_Mode 0x01 -#define Multi_IA 0x20 -#define REG3 0x03 -#define TPE_BIT 0x04 -#define BNC_BIT 0x20 -#define REG13 0x0d -#define FDX 0x00 -#define A_N_ENABLE 0x02 - -#define I_ADD_REG0 0x04 -#define I_ADD_REG1 0x05 -#define I_ADD_REG2 0x06 -#define I_ADD_REG3 0x07 -#define I_ADD_REG4 0x08 -#define I_ADD_REG5 0x09 - -#define EEPROM_REG_PRO 0x0a -#define EEPROM_REG_10 0x0b - -#define EESK 0x01 -#define EECS 0x02 -#define EEDI 0x04 -#define EEDO 0x08 - -/* do a full reset */ -#define eepro_reset(ioaddr) outb(RESET_CMD, ioaddr) - -/* do a nice reset */ -#define eepro_sel_reset(ioaddr) { \ - outb(SEL_RESET_CMD, ioaddr); \ - SLOW_DOWN; \ - SLOW_DOWN; \ - } - -/* disable all interrupts */ -#define eepro_dis_int(ioaddr) outb(ALL_MASK, ioaddr + INT_MASK_REG) - -/* clear all interrupts */ -#define eepro_clear_int(ioaddr) outb(ALL_MASK, ioaddr + STATUS_REG) - -/* enable tx/rx */ -#define eepro_en_int(ioaddr) outb(ALL_MASK & ~(RX_MASK | TX_MASK), \ - ioaddr + INT_MASK_REG) - -/* enable exec event interrupt */ -#define eepro_en_intexec(ioaddr) outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG) - -/* enable rx */ -#define eepro_en_rx(ioaddr) outb(RCV_ENABLE_CMD, ioaddr) - -/* disable rx */ -#define eepro_dis_rx(ioaddr) outb(RCV_DISABLE_CMD, ioaddr) - -/* switch bank */ -#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr) -#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr) -#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr) - -/* enable interrupt line */ -#define eepro_en_intline(ioaddr) outb(inb(ioaddr + REG1) | INT_ENABLE,\ - ioaddr + REG1) - -/* disable interrupt line */ -#define eepro_dis_intline(ioaddr) outb(inb(ioaddr + REG1) & 0x7f, \ - ioaddr + REG1); - -/* set diagnose flag */ -#define eepro_diag(ioaddr) outb(DIAGNOSE_CMD, ioaddr) - -/* ack for rx int */ -#define eepro_ack_rx(ioaddr) outb (RX_INT, ioaddr + STATUS_REG) - -/* ack for tx int */ -#define eepro_ack_tx(ioaddr) outb (TX_INT, ioaddr + STATUS_REG) - -/* a complete sel reset */ -#define eepro_complete_selreset(ioaddr) { \ - dev->stats.tx_errors++;\ - eepro_sel_reset(ioaddr);\ - lp->tx_end = \ - lp->xmt_lower_limit;\ - lp->tx_start = lp->tx_end;\ - lp->tx_last = 0;\ - dev->trans_start = jiffies;\ - netif_wake_queue(dev);\ - eepro_en_rx(ioaddr);\ - } - -/* Check for a network adaptor of this type, and return '0' if one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ -static int __init do_eepro_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - -#ifdef PnPWakeup - /* XXXX for multiple cards should this only be run once? */ - - /* Wakeup: */ - #define WakeupPort 0x279 - #define WakeupSeq {0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,\ - 0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,\ - 0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,\ - 0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43} - - { - unsigned short int WS[32]=WakeupSeq; - - if (request_region(WakeupPort, 2, "eepro wakeup")) { - if (net_debug>5) - printk(KERN_DEBUG "Waking UP\n"); - - outb_p(0,WakeupPort); - outb_p(0,WakeupPort); - for (i=0; i<32; i++) { - outb_p(WS[i],WakeupPort); - if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]); - } - - release_region(WakeupPort, 2); - } else - printk(KERN_WARNING "PnP wakeup region busy!\n"); - } -#endif - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return eepro_probe1(dev, 0); - - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; eepro_portlist[i]; i++) { - dev->base_addr = eepro_portlist[i]; - dev->irq = irq; - if (eepro_probe1(dev, 1) == 0) - return 0; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init eepro_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct eepro_local)); - int err; - - if (!dev) - return ERR_PTR(-ENODEV); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_eepro_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static void __init printEEPROMInfo(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned short Word; - int i,j; - - j = ee_Checksum; - for (i = 0; i < 8; i++) - j += lp->word[i]; - for ( ; i < ee_SIZE; i++) - j += read_eeprom(ioaddr, i, dev); - - printk(KERN_DEBUG "Checksum: %#x\n",j&0xffff); - - Word = lp->word[0]; - printk(KERN_DEBUG "Word0:\n"); - printk(KERN_DEBUG " Plug 'n Pray: %d\n",GetBit(Word,ee_PnP)); - printk(KERN_DEBUG " Buswidth: %d\n",(GetBit(Word,ee_BusWidth)+1)*8 ); - printk(KERN_DEBUG " AutoNegotiation: %d\n",GetBit(Word,ee_AutoNeg)); - printk(KERN_DEBUG " IO Address: %#x\n", (Word>>ee_IO0)<<4); - - if (net_debug>4) { - Word = lp->word[1]; - printk(KERN_DEBUG "Word1:\n"); - printk(KERN_DEBUG " INT: %d\n", Word & ee_IntMask); - printk(KERN_DEBUG " LI: %d\n", GetBit(Word,ee_LI)); - printk(KERN_DEBUG " PC: %d\n", GetBit(Word,ee_PC)); - printk(KERN_DEBUG " TPE/AUI: %d\n", GetBit(Word,ee_TPE_AUI)); - printk(KERN_DEBUG " Jabber: %d\n", GetBit(Word,ee_Jabber)); - printk(KERN_DEBUG " AutoPort: %d\n", !GetBit(Word,ee_AutoPort)); - printk(KERN_DEBUG " Duplex: %d\n", GetBit(Word,ee_Duplex)); - } - - Word = lp->word[5]; - printk(KERN_DEBUG "Word5:\n"); - printk(KERN_DEBUG " BNC: %d\n",GetBit(Word,ee_BNC_TPE)); - printk(KERN_DEBUG " NumConnectors: %d\n",GetBit(Word,ee_NumConn)); - printk(KERN_DEBUG " Has "); - if (GetBit(Word,ee_PortTPE)) printk(KERN_DEBUG "TPE "); - if (GetBit(Word,ee_PortBNC)) printk(KERN_DEBUG "BNC "); - if (GetBit(Word,ee_PortAUI)) printk(KERN_DEBUG "AUI "); - printk(KERN_DEBUG "port(s)\n"); - - Word = lp->word[6]; - printk(KERN_DEBUG "Word6:\n"); - printk(KERN_DEBUG " Stepping: %d\n",Word & ee_StepMask); - printk(KERN_DEBUG " BoardID: %d\n",Word>>ee_BoardID); - - Word = lp->word[7]; - printk(KERN_DEBUG "Word7:\n"); - printk(KERN_DEBUG " INT to IRQ:\n"); - - for (i=0, j=0; i<15; i++) - if (GetBit(Word,i)) printk(KERN_DEBUG " INT%d -> IRQ %d;",j++,i); - - printk(KERN_DEBUG "\n"); -} - -/* function to recalculate the limits of buffer based on rcv_ram */ -static void eepro_recalc (struct net_device *dev) -{ - struct eepro_local * lp; - - lp = netdev_priv(dev); - lp->xmt_ram = RAM_SIZE - lp->rcv_ram; - - if (lp->eepro == LAN595FX_10ISA) { - lp->xmt_lower_limit = XMT_START_10; - lp->xmt_upper_limit = (lp->xmt_ram - 2); - lp->rcv_lower_limit = lp->xmt_ram; - lp->rcv_upper_limit = (RAM_SIZE - 2); - } - else { - lp->rcv_lower_limit = RCV_START_PRO; - lp->rcv_upper_limit = (lp->rcv_ram - 2); - lp->xmt_lower_limit = lp->rcv_ram; - lp->xmt_upper_limit = (RAM_SIZE - 2); - } -} - -/* prints boot-time info */ -static void __init eepro_print_info (struct net_device *dev) -{ - struct eepro_local * lp = netdev_priv(dev); - int i; - const char * ifmap[] = {"AUI", "10Base2", "10BaseT"}; - - i = inb(dev->base_addr + ID_REG); - printk(KERN_DEBUG " id: %#x ",i); - printk(" io: %#x ", (unsigned)dev->base_addr); - - switch (lp->eepro) { - case LAN595FX_10ISA: - printk("%s: Intel EtherExpress 10 ISA\n at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - case LAN595FX: - printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - case LAN595TX: - printk("%s: Intel EtherExpress Pro/10 ISA at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - case LAN595: - printk("%s: Intel 82595-based lan card at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - } - - printk(" %pM", dev->dev_addr); - - if (net_debug > 3) - printk(KERN_DEBUG ", %dK RCV buffer", - (int)(lp->rcv_ram)/1024); - - if (dev->irq > 2) - printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]); - else - printk(", %s.\n", ifmap[dev->if_port]); - - if (net_debug > 3) { - i = lp->word[5]; - if (i & 0x2000) /* bit 13 of EEPROM word 5 */ - printk(KERN_DEBUG "%s: Concurrent Processing is " - "enabled but not used!\n", dev->name); - } - - /* Check the station address for the manufacturer's code */ - if (net_debug>3) - printEEPROMInfo(dev); -} - -static const struct ethtool_ops eepro_ethtool_ops; - -static const struct net_device_ops eepro_netdev_ops = { - .ndo_open = eepro_open, - .ndo_stop = eepro_close, - .ndo_start_xmit = eepro_send_packet, - .ndo_set_rx_mode = set_multicast_list, - .ndo_tx_timeout = eepro_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probe avoids doing writes, and - verifies that the correct device exists and functions. */ - -static int __init eepro_probe1(struct net_device *dev, int autoprobe) -{ - unsigned short station_addr[3], id, counter; - int i; - struct eepro_local *lp; - int ioaddr = dev->base_addr; - int err; - - /* Grab the region so we can find another board if autoIRQ fails. */ - if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) { - if (!autoprobe) - printk(KERN_WARNING "EEPRO: io-port 0x%04x in use\n", - ioaddr); - return -EBUSY; - } - - /* Now, we are going to check for the signature of the - ID_REG (register 2 of bank 0) */ - - id = inb(ioaddr + ID_REG); - - if ((id & ID_REG_MASK) != ID_REG_SIG) - goto exit; - - /* We seem to have the 82595 signature, let's - play with its counter (last 2 bits of - register 2 of bank 0) to be sure. */ - - counter = id & R_ROBIN_BITS; - - if ((inb(ioaddr + ID_REG) & R_ROBIN_BITS) != (counter + 0x40)) - goto exit; - - lp = netdev_priv(dev); - memset(lp, 0, sizeof(struct eepro_local)); - lp->xmt_bar = XMT_BAR_PRO; - lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO; - lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO; - lp->eeprom_reg = EEPROM_REG_PRO; - spin_lock_init(&lp->lock); - - /* Now, get the ethernet hardware address from - the EEPROM */ - station_addr[0] = read_eeprom(ioaddr, 2, dev); - - /* FIXME - find another way to know that we've found - * an Etherexpress 10 - */ - if (station_addr[0] == 0x0000 || station_addr[0] == 0xffff) { - lp->eepro = LAN595FX_10ISA; - lp->eeprom_reg = EEPROM_REG_10; - lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10; - lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10; - lp->xmt_bar = XMT_BAR_10; - station_addr[0] = read_eeprom(ioaddr, 2, dev); - } - - /* get all words at once. will be used here and for ethtool */ - for (i = 0; i < 8; i++) { - lp->word[i] = read_eeprom(ioaddr, i, dev); - } - station_addr[1] = lp->word[3]; - station_addr[2] = lp->word[4]; - - if (!lp->eepro) { - if (lp->word[7] == ee_FX_INT2IRQ) - lp->eepro = 2; - else if (station_addr[2] == SA_ADDR1) - lp->eepro = 1; - } - - /* Fill in the 'dev' fields. */ - for (i=0; i < 6; i++) - dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i]; - - /* RX buffer must be more than 3K and less than 29K */ - if (dev->mem_end < 3072 || dev->mem_end > 29696) - lp->rcv_ram = RCV_DEFAULT_RAM; - - /* calculate {xmt,rcv}_{lower,upper}_limit */ - eepro_recalc(dev); - - if (GetBit(lp->word[5], ee_BNC_TPE)) - dev->if_port = BNC; - else - dev->if_port = TPE; - - if (dev->irq < 2 && lp->eepro != 0) { - /* Mask off INT number */ - int count = lp->word[1] & 7; - unsigned irqMask = lp->word[7]; - - while (count--) - irqMask &= irqMask - 1; - - count = ffs(irqMask); - - if (count) - dev->irq = count - 1; - - if (dev->irq < 2) { - printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n"); - goto exit; - } else if (dev->irq == 2) { - dev->irq = 9; - } - } - - dev->netdev_ops = &eepro_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - dev->ethtool_ops = &eepro_ethtool_ops; - - /* print boot time info */ - eepro_print_info(dev); - - /* reset 82595 */ - eepro_reset(ioaddr); - - err = register_netdev(dev); - if (err) - goto err; - return 0; -exit: - err = -ENODEV; -err: - release_region(dev->base_addr, EEPRO_IO_EXTENT); - return err; -} - -/* Open/initialize the board. This is called (in the current kernel) - sometime after booting when the 'ifconfig' program is run. - - This routine should set everything up anew at each open, even - registers that "should" only need to be set once at boot, so that - there is non-reboot way to recover if something goes wrong. - */ - -static const char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1}; -static const char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1}; -static int eepro_grab_irq(struct net_device *dev) -{ - static const int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 }; - const int *irqp = irqlist; - int temp_reg, ioaddr = dev->base_addr; - - eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */ - - /* Enable the interrupt line. */ - eepro_en_intline(ioaddr); - - /* be CAREFUL, BANK 0 now */ - eepro_sw2bank0(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - /* Let EXEC event to interrupt */ - eepro_en_intexec(ioaddr); - - do { - eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */ - - temp_reg = inb(ioaddr + INT_NO_REG); - outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG); - - eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */ - - if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) { - unsigned long irq_mask; - /* Twinkle the interrupt, and check if it's seen */ - irq_mask = probe_irq_on(); - - eepro_diag(ioaddr); /* RESET the 82595 */ - mdelay(20); - - if (*irqp == probe_irq_off(irq_mask)) /* It's a good IRQ line */ - break; - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - } - } while (*++irqp); - - eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */ - - /* Disable the physical interrupt line. */ - eepro_dis_intline(ioaddr); - - eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */ - - /* Mask all the interrupts. */ - eepro_dis_int(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - return dev->irq; -} - -static int eepro_open(struct net_device *dev) -{ - unsigned short temp_reg, old8, old9; - int irqMask; - int i, ioaddr = dev->base_addr; - struct eepro_local *lp = netdev_priv(dev); - - if (net_debug > 3) - printk(KERN_DEBUG "%s: entering eepro_open routine.\n", dev->name); - - irqMask = lp->word[7]; - - if (lp->eepro == LAN595FX_10ISA) { - if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 3;\n"); - } - else if (irqMask == ee_FX_INT2IRQ) /* INT to IRQ Mask */ - { - lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */ - if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 2;\n"); - } - - else if ((dev->dev_addr[0] == SA_ADDR0 && - dev->dev_addr[1] == SA_ADDR1 && - dev->dev_addr[2] == SA_ADDR2)) - { - lp->eepro = 1; - if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 1;\n"); - } /* Yes, an Intel EtherExpress Pro/10 */ - - else lp->eepro = 0; /* No, it is a generic 82585 lan card */ - - /* Get the interrupt vector for the 82595 */ - if (dev->irq < 2 && eepro_grab_irq(dev) == 0) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq); - return -EAGAIN; - } - - if (request_irq(dev->irq , eepro_interrupt, 0, dev->name, dev)) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq); - return -EAGAIN; - } - - /* Initialize the 82595. */ - - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - temp_reg = inb(ioaddr + lp->eeprom_reg); - - lp->stepping = temp_reg >> 5; /* Get the stepping number of the 595 */ - - if (net_debug > 3) - printk(KERN_DEBUG "The stepping of the 82595 is %d\n", lp->stepping); - - if (temp_reg & 0x10) /* Check the TurnOff Enable bit */ - outb(temp_reg & 0xef, ioaddr + lp->eeprom_reg); - for (i=0; i < 6; i++) - outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i); - - temp_reg = inb(ioaddr + REG1); /* Setup Transmit Chaining */ - outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */ - | RCV_Discard_BadFrame, ioaddr + REG1); - - temp_reg = inb(ioaddr + REG2); /* Match broadcast */ - outb(temp_reg | 0x14, ioaddr + REG2); - - temp_reg = inb(ioaddr + REG3); - outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */ - - /* Set the receiving mode */ - eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */ - - /* Set the interrupt vector */ - temp_reg = inb(ioaddr + INT_NO_REG); - if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA) - outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG); - else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG); - - - temp_reg = inb(ioaddr + INT_NO_REG); - if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA) - outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG); - else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG); - - if (net_debug > 3) - printk(KERN_DEBUG "eepro_open: content of INT Reg is %x\n", temp_reg); - - - /* Initialize the RCV and XMT upper and lower limits */ - outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG); - outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG); - outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg); - outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg); - - /* Enable the interrupt line. */ - eepro_en_intline(ioaddr); - - /* Switch back to Bank 0 */ - eepro_sw2bank0(ioaddr); - - /* Let RX and TX events to interrupt */ - eepro_en_int(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - /* Initialize RCV */ - outw(lp->rcv_lower_limit, ioaddr + RCV_BAR); - lp->rx_start = lp->rcv_lower_limit; - outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP); - - /* Initialize XMT */ - outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar); - lp->tx_start = lp->tx_end = lp->xmt_lower_limit; - lp->tx_last = 0; - - /* Check for the i82595TX and i82595FX */ - old8 = inb(ioaddr + 8); - outb(~old8, ioaddr + 8); - - if ((temp_reg = inb(ioaddr + 8)) == old8) { - if (net_debug > 3) - printk(KERN_DEBUG "i82595 detected!\n"); - lp->version = LAN595; - } - else { - lp->version = LAN595TX; - outb(old8, ioaddr + 8); - old9 = inb(ioaddr + 9); - - if (irqMask==ee_FX_INT2IRQ) { - if (net_debug > 3) { - printk(KERN_DEBUG "IrqMask: %#x\n",irqMask); - printk(KERN_DEBUG "i82595FX detected!\n"); - } - lp->version = LAN595FX; - outb(old9, ioaddr + 9); - if (dev->if_port != TPE) { /* Hopefully, this will fix the - problem of using Pentiums and - pro/10 w/ BNC. */ - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - temp_reg = inb(ioaddr + REG13); - /* disable the full duplex mode since it is not - applicable with the 10Base2 cable. */ - outb(temp_reg & ~(FDX | A_N_ENABLE), REG13); - eepro_sw2bank0(ioaddr); /* be CAREFUL, BANK 0 now */ - } - } - else if (net_debug > 3) { - printk(KERN_DEBUG "temp_reg: %#x ~old9: %#x\n",temp_reg,((~old9)&0xff)); - printk(KERN_DEBUG "i82595TX detected!\n"); - } - } - - eepro_sel_reset(ioaddr); - - netif_start_queue(dev); - - if (net_debug > 3) - printk(KERN_DEBUG "%s: exiting eepro_open routine.\n", dev->name); - - /* enabling rx */ - eepro_en_rx(ioaddr); - - return 0; -} - -static void eepro_tx_timeout (struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* if (net_debug > 1) */ - printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name, - "network cable problem"); - /* This is not a duplicate. One message for the console, - one for the log file */ - printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name, - "network cable problem"); - eepro_complete_selreset(ioaddr); -} - - -static netdev_tx_t eepro_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - unsigned long flags; - int ioaddr = dev->base_addr; - short length = skb->len; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering eepro_send_packet routine.\n", dev->name); - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - netif_stop_queue (dev); - - eepro_dis_int(ioaddr); - spin_lock_irqsave(&lp->lock, flags); - - { - unsigned char *buf = skb->data; - - if (hardware_send_packet(dev, buf, length)) - /* we won't wake queue here because we're out of space */ - dev->stats.tx_dropped++; - else { - dev->stats.tx_bytes+=skb->len; - netif_wake_queue(dev); - } - - } - - dev_kfree_skb (skb); - - /* You might need to clean up and record Tx statistics here. */ - /* dev->stats.tx_aborted_errors++; */ - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting eepro_send_packet routine.\n", dev->name); - - eepro_en_int(ioaddr); - spin_unlock_irqrestore(&lp->lock, flags); - - return NETDEV_TX_OK; -} - - -/* The typical workload of the driver: - Handle the network interface interrupts. */ - -static irqreturn_t -eepro_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct eepro_local *lp; - int ioaddr, status, boguscount = 20; - int handled = 0; - - lp = netdev_priv(dev); - - spin_lock(&lp->lock); - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering eepro_interrupt routine.\n", dev->name); - - ioaddr = dev->base_addr; - - while (((status = inb(ioaddr + STATUS_REG)) & (RX_INT|TX_INT)) && (boguscount--)) - { - handled = 1; - if (status & RX_INT) { - if (net_debug > 4) - printk(KERN_DEBUG "%s: packet received interrupt.\n", dev->name); - - eepro_dis_int(ioaddr); - - /* Get the received packets */ - eepro_ack_rx(ioaddr); - eepro_rx(dev); - - eepro_en_int(ioaddr); - } - if (status & TX_INT) { - if (net_debug > 4) - printk(KERN_DEBUG "%s: packet transmit interrupt.\n", dev->name); - - - eepro_dis_int(ioaddr); - - /* Process the status of transmitted packets */ - eepro_ack_tx(ioaddr); - eepro_transmit_interrupt(dev); - - eepro_en_int(ioaddr); - } - } - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting eepro_interrupt routine.\n", dev->name); - - spin_unlock(&lp->lock); - return IRQ_RETVAL(handled); -} - -static int eepro_close(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - short temp_reg; - - netif_stop_queue(dev); - - eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */ - - /* Disable the physical interrupt line. */ - temp_reg = inb(ioaddr + REG1); - outb(temp_reg & 0x7f, ioaddr + REG1); - - eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */ - - /* Flush the Tx and disable Rx. */ - outb(STOP_RCV_CMD, ioaddr); - lp->tx_start = lp->tx_end = lp->xmt_lower_limit; - lp->tx_last = 0; - - /* Mask all the interrupts. */ - eepro_dis_int(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - /* Reset the 82595 */ - eepro_reset(ioaddr); - - /* release the interrupt */ - free_irq(dev->irq, dev); - - /* Update the statistics here. What statistics? */ - - return 0; -} - -/* Set or clear the multicast filter for this adaptor. - */ -static void -set_multicast_list(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - unsigned short mode; - struct netdev_hw_addr *ha; - int mc_count = netdev_mc_count(dev); - - if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63) - { - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - mode = inb(ioaddr + REG2); - outb(mode | PRMSC_Mode, ioaddr + REG2); - mode = inb(ioaddr + REG3); - outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ - eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */ - } - - else if (mc_count == 0) - { - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - mode = inb(ioaddr + REG2); - outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */ - mode = inb(ioaddr + REG3); - outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ - eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */ - } - - else - { - unsigned short status, *eaddrs; - int i, boguscount = 0; - - /* Disable RX and TX interrupts. Necessary to avoid - corruption of the HOST_ADDRESS_REG by interrupt - service routines. */ - eepro_dis_int(ioaddr); - - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - mode = inb(ioaddr + REG2); - outb(mode | Multi_IA, ioaddr + REG2); - mode = inb(ioaddr + REG3); - outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ - eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */ - outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG); - outw(MC_SETUP, ioaddr + IO_PORT); - outw(0, ioaddr + IO_PORT); - outw(0, ioaddr + IO_PORT); - outw(6 * (mc_count + 1), ioaddr + IO_PORT); - - netdev_for_each_mc_addr(ha, dev) { - eaddrs = (unsigned short *) ha->addr; - outw(*eaddrs++, ioaddr + IO_PORT); - outw(*eaddrs++, ioaddr + IO_PORT); - outw(*eaddrs++, ioaddr + IO_PORT); - } - - eaddrs = (unsigned short *) dev->dev_addr; - outw(eaddrs[0], ioaddr + IO_PORT); - outw(eaddrs[1], ioaddr + IO_PORT); - outw(eaddrs[2], ioaddr + IO_PORT); - outw(lp->tx_end, ioaddr + lp->xmt_bar); - outb(MC_SETUP, ioaddr); - - /* Update the transmit queue */ - i = lp->tx_end + XMT_HEADER + 6 * (mc_count + 1); - - if (lp->tx_start != lp->tx_end) - { - /* update the next address and the chain bit in the - last packet */ - outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG); - outw(i, ioaddr + IO_PORT); - outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG); - status = inw(ioaddr + IO_PORT); - outw(status | CHAIN_BIT, ioaddr + IO_PORT); - lp->tx_end = i ; - } - else { - lp->tx_start = lp->tx_end = i ; - } - - /* Acknowledge that the MC setup is done */ - do { /* We should be doing this in the eepro_interrupt()! */ - SLOW_DOWN; - SLOW_DOWN; - if (inb(ioaddr + STATUS_REG) & 0x08) - { - i = inb(ioaddr); - outb(0x08, ioaddr + STATUS_REG); - - if (i & 0x20) { /* command ABORTed */ - printk(KERN_NOTICE "%s: multicast setup failed.\n", - dev->name); - break; - } else if ((i & 0x0f) == 0x03) { /* MC-Done */ - printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n", - dev->name, mc_count, - mc_count > 1 ? "es":""); - break; - } - } - } while (++boguscount < 100); - - /* Re-enable RX and TX interrupts */ - eepro_en_int(ioaddr); - } - if (lp->eepro == LAN595FX_10ISA) { - eepro_complete_selreset(ioaddr); - } - else - eepro_en_rx(ioaddr); -} - -/* The horrible routine to read a word from the serial EEPROM. */ -/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */ - -/* The delay between EEPROM clock transitions. */ -#define eeprom_delay() { udelay(40); } -#define EE_READ_CMD (6 << 6) - -static int -read_eeprom(int ioaddr, int location, struct net_device *dev) -{ - int i; - unsigned short retval = 0; - struct eepro_local *lp = netdev_priv(dev); - short ee_addr = ioaddr + lp->eeprom_reg; - int read_cmd = location | EE_READ_CMD; - short ctrl_val = EECS ; - - /* XXXX - black magic */ - eepro_sw2bank1(ioaddr); - outb(0x00, ioaddr + STATUS_REG); - /* XXXX - black magic */ - - eepro_sw2bank2(ioaddr); - outb(ctrl_val, ee_addr); - - /* Shift the read command bits out. */ - for (i = 8; i >= 0; i--) { - short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI - : ctrl_val; - outb(outval, ee_addr); - outb(outval | EESK, ee_addr); /* EEPROM clock tick. */ - eeprom_delay(); - outb(outval, ee_addr); /* Finish EEPROM a clock tick. */ - eeprom_delay(); - } - outb(ctrl_val, ee_addr); - - for (i = 16; i > 0; i--) { - outb(ctrl_val | EESK, ee_addr); eeprom_delay(); - retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0); - outb(ctrl_val, ee_addr); eeprom_delay(); - } - - /* Terminate the EEPROM access. */ - ctrl_val &= ~EECS; - outb(ctrl_val | EESK, ee_addr); - eeprom_delay(); - outb(ctrl_val, ee_addr); - eeprom_delay(); - eepro_sw2bank0(ioaddr); - return retval; -} - -static int -hardware_send_packet(struct net_device *dev, void *buf, short length) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - unsigned status, tx_available, last, end; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering hardware_send_packet routine.\n", dev->name); - - /* determine how much of the transmit buffer space is available */ - if (lp->tx_end > lp->tx_start) - tx_available = lp->xmt_ram - (lp->tx_end - lp->tx_start); - else if (lp->tx_end < lp->tx_start) - tx_available = lp->tx_start - lp->tx_end; - else tx_available = lp->xmt_ram; - - if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER) >= tx_available) { - /* No space available ??? */ - return 1; - } - - last = lp->tx_end; - end = last + (((length + 3) >> 1) << 1) + XMT_HEADER; - - if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */ - if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) { - /* Arrrr!!!, must keep the xmt header together, - several days were lost to chase this one down. */ - last = lp->xmt_lower_limit; - end = last + (((length + 3) >> 1) << 1) + XMT_HEADER; - } - else end = lp->xmt_lower_limit + (end - - lp->xmt_upper_limit + 2); - } - - outw(last, ioaddr + HOST_ADDRESS_REG); - outw(XMT_CMD, ioaddr + IO_PORT); - outw(0, ioaddr + IO_PORT); - outw(end, ioaddr + IO_PORT); - outw(length, ioaddr + IO_PORT); - - if (lp->version == LAN595) - outsw(ioaddr + IO_PORT, buf, (length + 3) >> 1); - else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */ - unsigned short temp = inb(ioaddr + INT_MASK_REG); - outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG); - outsl(ioaddr + IO_PORT_32_BIT, buf, (length + 3) >> 2); - outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG); - } - - /* A dummy read to flush the DRAM write pipeline */ - status = inw(ioaddr + IO_PORT); - - if (lp->tx_start == lp->tx_end) { - outw(last, ioaddr + lp->xmt_bar); - outb(XMT_CMD, ioaddr); - lp->tx_start = last; /* I don't like to change tx_start here */ - } - else { - /* update the next address and the chain bit in the - last packet */ - - if (lp->tx_end != last) { - outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG); - outw(last, ioaddr + IO_PORT); - } - - outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG); - status = inw(ioaddr + IO_PORT); - outw(status | CHAIN_BIT, ioaddr + IO_PORT); - - /* Continue the transmit command */ - outb(RESUME_XMT_CMD, ioaddr); - } - - lp->tx_last = last; - lp->tx_end = end; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting hardware_send_packet routine.\n", dev->name); - - return 0; -} - -static void -eepro_rx(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - short boguscount = 20; - short rcv_car = lp->rx_start; - unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering eepro_rx routine.\n", dev->name); - - /* Set the read pointer to the start of the RCV */ - outw(rcv_car, ioaddr + HOST_ADDRESS_REG); - - rcv_event = inw(ioaddr + IO_PORT); - - while (rcv_event == RCV_DONE) { - - rcv_status = inw(ioaddr + IO_PORT); - rcv_next_frame = inw(ioaddr + IO_PORT); - rcv_size = inw(ioaddr + IO_PORT); - - if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) { - - /* Malloc up new buffer. */ - struct sk_buff *skb; - - dev->stats.rx_bytes+=rcv_size; - rcv_size &= 0x3fff; - skb = netdev_alloc_skb(dev, rcv_size + 5); - if (skb == NULL) { - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - rcv_car = lp->rx_start + RCV_HEADER + rcv_size; - lp->rx_start = rcv_next_frame; - outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG); - - break; - } - skb_reserve(skb,2); - - if (lp->version == LAN595) - insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 3) >> 1); - else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */ - unsigned short temp = inb(ioaddr + INT_MASK_REG); - outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG); - insl(ioaddr+IO_PORT_32_BIT, skb_put(skb,rcv_size), - (rcv_size + 3) >> 2); - outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG); - } - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - } - - else { /* Not sure will ever reach here, - I set the 595 to discard bad received frames */ - dev->stats.rx_errors++; - - if (rcv_status & 0x0100) - dev->stats.rx_over_errors++; - - else if (rcv_status & 0x0400) - dev->stats.rx_frame_errors++; - - else if (rcv_status & 0x0800) - dev->stats.rx_crc_errors++; - - printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n", - dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size); - } - - if (rcv_status & 0x1000) - dev->stats.rx_length_errors++; - - rcv_car = lp->rx_start + RCV_HEADER + rcv_size; - lp->rx_start = rcv_next_frame; - - if (--boguscount == 0) - break; - - outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG); - rcv_event = inw(ioaddr + IO_PORT); - - } - if (rcv_car == 0) - rcv_car = lp->rcv_upper_limit | 0xff; - - outw(rcv_car - 1, ioaddr + RCV_STOP); - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting eepro_rx routine.\n", dev->name); -} - -static void -eepro_transmit_interrupt(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - short boguscount = 25; - short xmt_status; - - while ((lp->tx_start != lp->tx_end) && boguscount--) { - - outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG); - xmt_status = inw(ioaddr+IO_PORT); - - if (!(xmt_status & TX_DONE_BIT)) - break; - - xmt_status = inw(ioaddr+IO_PORT); - lp->tx_start = inw(ioaddr+IO_PORT); - - netif_wake_queue (dev); - - if (xmt_status & TX_OK) - dev->stats.tx_packets++; - else { - dev->stats.tx_errors++; - if (xmt_status & 0x0400) { - dev->stats.tx_carrier_errors++; - printk(KERN_DEBUG "%s: carrier error\n", - dev->name); - printk(KERN_DEBUG "%s: XMT status = %#x\n", - dev->name, xmt_status); - } - else { - printk(KERN_DEBUG "%s: XMT status = %#x\n", - dev->name, xmt_status); - printk(KERN_DEBUG "%s: XMT status = %#x\n", - dev->name, xmt_status); - } - } - if (xmt_status & 0x000f) { - dev->stats.collisions += (xmt_status & 0x000f); - } - - if ((xmt_status & 0x0040) == 0x0) { - dev->stats.tx_heartbeat_errors++; - } - } -} - -static int eepro_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct eepro_local *lp = netdev_priv(dev); - - cmd->supported = SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_Autoneg; - cmd->advertising = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_Autoneg; - - if (GetBit(lp->word[5], ee_PortTPE)) { - cmd->supported |= SUPPORTED_TP; - cmd->advertising |= ADVERTISED_TP; - } - if (GetBit(lp->word[5], ee_PortBNC)) { - cmd->supported |= SUPPORTED_BNC; - cmd->advertising |= ADVERTISED_BNC; - } - if (GetBit(lp->word[5], ee_PortAUI)) { - cmd->supported |= SUPPORTED_AUI; - cmd->advertising |= ADVERTISED_AUI; - } - - ethtool_cmd_speed_set(cmd, SPEED_10); - - if (dev->if_port == TPE && lp->word[1] & ee_Duplex) { - cmd->duplex = DUPLEX_FULL; - } - else { - cmd->duplex = DUPLEX_HALF; - } - - cmd->port = dev->if_port; - cmd->phy_address = dev->base_addr; - cmd->transceiver = XCVR_INTERNAL; - - if (lp->word[0] & ee_AutoNeg) { - cmd->autoneg = 1; - } - - return 0; -} - -static void eepro_ethtool_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *drvinfo) -{ - strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); - strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); - snprintf(drvinfo->bus_info, sizeof(drvinfo->bus_info), - "ISA 0x%lx", dev->base_addr); -} - -static const struct ethtool_ops eepro_ethtool_ops = { - .get_settings = eepro_ethtool_get_settings, - .get_drvinfo = eepro_ethtool_get_drvinfo, -}; - -#ifdef MODULE - -#define MAX_EEPRO 8 -static struct net_device *dev_eepro[MAX_EEPRO]; - -static int io[MAX_EEPRO] = { - [0 ... MAX_EEPRO-1] = -1 -}; -static int irq[MAX_EEPRO]; -static int mem[MAX_EEPRO] = { /* Size of the rx buffer in KB */ - [0 ... MAX_EEPRO-1] = RCV_DEFAULT_RAM/1024 -}; -static int autodetect; - -static int n_eepro; -/* For linux 2.1.xx */ - -MODULE_AUTHOR("Pascal Dupuis and others"); -MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver"); -MODULE_LICENSE("GPL"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param(autodetect, int, 0); -MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); -MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)"); -MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)"); - -int __init init_module(void) -{ - struct net_device *dev; - int i; - if (io[0] == -1 && autodetect == 0) { - printk(KERN_WARNING "eepro_init_module: Probe is very dangerous in ISA boards!\n"); - printk(KERN_WARNING "eepro_init_module: Please add \"autodetect=1\" to force probe\n"); - return -ENODEV; - } - else if (autodetect) { - /* if autodetect is set then we must force detection */ - for (i = 0; i < MAX_EEPRO; i++) { - io[i] = 0; - } - - printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n"); - } - - for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) { - dev = alloc_etherdev(sizeof(struct eepro_local)); - if (!dev) - break; - - dev->mem_end = mem[i]; - dev->base_addr = io[i]; - dev->irq = irq[i]; - - if (do_eepro_probe(dev) == 0) { - dev_eepro[n_eepro++] = dev; - continue; - } - free_netdev(dev); - break; - } - - if (n_eepro) - printk(KERN_INFO "%s", version); - - return n_eepro ? 0 : -ENODEV; -} - -void __exit -cleanup_module(void) -{ - int i; - - for (i=0; ibase_addr, EEPRO_IO_EXTENT); - free_netdev(dev); - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/i825xx/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c deleted file mode 100644 index 7a6a2f0..0000000 --- a/drivers/net/ethernet/i825xx/eexpress.c +++ /dev/null @@ -1,1661 +0,0 @@ -/* Intel EtherExpress 16 device driver for Linux - * - * Written by John Sullivan, 1995 - * based on original code by Donald Becker, with changes by - * Alan Cox and Pauline Middelink. - * - * Support for 8-bit mode by Zoltan Szilagyi - * - * Many modifications, and currently maintained, by - * Philip Blundell - * Added the Compaq LTE Alan Cox - * Added MCA support Adam Fritzler (now deleted) - * - * Note - this driver is experimental still - it has problems on faster - * machines. Someone needs to sit down and go through it line by line with - * a databook... - */ - -/* The EtherExpress 16 is a fairly simple card, based on a shared-memory - * design using the i82586 Ethernet coprocessor. It bears no relationship, - * as far as I know, to the similarly-named "EtherExpress Pro" range. - * - * Historically, Linux support for these cards has been very bad. However, - * things seem to be getting better slowly. - */ - -/* If your card is confused about what sort of interface it has (eg it - * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART' - * or 'SOFTSET /LISA' from DOS seems to help. - */ - -/* Here's the scoop on memory mapping. - * - * There are three ways to access EtherExpress card memory: either using the - * shared-memory mapping, or using PIO through the dataport, or using PIO - * through the "shadow memory" ports. - * - * The shadow memory system works by having the card map some of its memory - * as follows: - * - * (the low five bits of the SMPTR are ignored) - * - * base+0x4000..400f memory at SMPTR+0..15 - * base+0x8000..800f memory at SMPTR+16..31 - * base+0xc000..c007 dubious stuff (memory at SMPTR+16..23 apparently) - * base+0xc008..c00f memory at 0x0008..0x000f - * - * This last set (the one at c008) is particularly handy because the SCB - * lives at 0x0008. So that set of ports gives us easy random access to data - * in the SCB without having to mess around setting up pointers and the like. - * We always use this method to access the SCB (via the scb_xx() functions). - * - * Dataport access works by aiming the appropriate (read or write) pointer - * at the first address you're interested in, and then reading or writing from - * the dataport. The pointers auto-increment after each transfer. We use - * this for data transfer. - * - * We don't use the shared-memory system because it allegedly doesn't work on - * all cards, and because it's a bit more prone to go wrong (it's one more - * thing to configure...). - */ - -/* Known bugs: - * - * - The card seems to want to give us two interrupts every time something - * happens, where just one would be better. - */ - -/* - * - * Note by Zoltan Szilagyi 10-12-96: - * - * I've succeeded in eliminating the "CU wedged" messages, and hence the - * lockups, which were only occurring with cards running in 8-bit mode ("force - * 8-bit operation" in Intel's SoftSet utility). This version of the driver - * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the - * CU before submitting a packet for transmission, and then restarts it as soon - * as the process of handing the packet is complete. This is definitely an - * unnecessary slowdown if the card is running in 16-bit mode; therefore one - * should detect 16-bit vs 8-bit mode from the EEPROM settings and act - * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for - * ftp's, which is significantly better than I get in DOS, so the overhead of - * stopping and restarting the CU with each transmit is not prohibitive in - * practice. - * - * Update by David Woodhouse 11/5/99: - * - * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture. - * I assume that this is because 16-bit accesses are actually handled as two - * 8-bit accesses. - */ - -#ifdef __alpha__ -#define LOCKUP16 1 -#endif -#ifndef LOCKUP16 -#define LOCKUP16 0 -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#ifndef NET_DEBUG -#define NET_DEBUG 4 -#endif - -#include "eexpress.h" - -#define EEXP_IO_EXTENT 16 - -/* - * Private data declarations - */ - -struct net_local -{ - unsigned long last_tx; /* jiffies when last transmit started */ - unsigned long init_time; /* jiffies when eexp_hw_init586 called */ - unsigned short rx_first; /* first rx buf, same as RX_BUF_START */ - unsigned short rx_last; /* last rx buf */ - unsigned short rx_ptr; /* first rx buf to look at */ - unsigned short tx_head; /* next free tx buf */ - unsigned short tx_reap; /* first in-use tx buf */ - unsigned short tx_tail; /* previous tx buf to tx_head */ - unsigned short tx_link; /* last known-executing tx buf */ - unsigned short last_tx_restart; /* set to tx_link when we - restart the CU */ - unsigned char started; - unsigned short rx_buf_start; - unsigned short rx_buf_end; - unsigned short num_tx_bufs; - unsigned short num_rx_bufs; - unsigned char width; /* 0 for 16bit, 1 for 8bit */ - unsigned char was_promisc; - unsigned char old_mc_count; - spinlock_t lock; -}; - -/* This is the code and data that is downloaded to the EtherExpress card's - * memory at boot time. - */ - -static unsigned short start_code[] = { -/* 0x0000 */ - 0x0001, /* ISCP: busy - cleared after reset */ - 0x0008,0x0000,0x0000, /* offset,address (lo,hi) of SCB */ - - 0x0000,0x0000, /* SCB: status, commands */ - 0x0000,0x0000, /* links to first command block, - first receive descriptor */ - 0x0000,0x0000, /* CRC error, alignment error counts */ - 0x0000,0x0000, /* out of resources, overrun error counts */ - - 0x0000,0x0000, /* pad */ - 0x0000,0x0000, - -/* 0x20 -- start of 82586 CU program */ -#define CONF_LINK 0x20 - 0x0000,Cmd_Config, - 0x0032, /* link to next command */ - 0x080c, /* 12 bytes follow : fifo threshold=8 */ - 0x2e40, /* don't rx bad frames - * SRDY/ARDY => ext. sync. : preamble len=8 - * take addresses from data buffers - * 6 bytes/address - */ - 0x6000, /* default backoff method & priority - * interframe spacing = 0x60 */ - 0xf200, /* slot time=0x200 - * max collision retry = 0xf */ -#define CONF_PROMISC 0x2e - 0x0000, /* no HDLC : normal CRC : enable broadcast - * disable promiscuous/multicast modes */ - 0x003c, /* minimum frame length = 60 octets) */ - - 0x0000,Cmd_SetAddr, - 0x003e, /* link to next command */ -#define CONF_HWADDR 0x38 - 0x0000,0x0000,0x0000, /* hardware address placed here */ - - 0x0000,Cmd_MCast, - 0x0076, /* link to next command */ -#define CONF_NR_MULTICAST 0x44 - 0x0000, /* number of bytes in multicast address(es) */ -#define CONF_MULTICAST 0x46 - 0x0000, 0x0000, 0x0000, /* some addresses */ - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - -#define CONF_DIAG_RESULT 0x76 - 0x0000, Cmd_Diag, - 0x007c, /* link to next command */ - - 0x0000,Cmd_TDR|Cmd_INT, - 0x0084, -#define CONF_TDR_RESULT 0x82 - 0x0000, - - 0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */ - 0x0084 /* dummy link */ -}; - -/* maps irq number to EtherExpress magic value */ -static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 }; - -/* - * Prototypes for Linux interface - */ - -static int eexp_open(struct net_device *dev); -static int eexp_close(struct net_device *dev); -static void eexp_timeout(struct net_device *dev); -static netdev_tx_t eexp_xmit(struct sk_buff *buf, - struct net_device *dev); - -static irqreturn_t eexp_irq(int irq, void *dev_addr); -static void eexp_set_multicast(struct net_device *dev); - -/* - * Prototypes for hardware access functions - */ - -static void eexp_hw_rx_pio(struct net_device *dev); -static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf, - unsigned short len); -static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr); -static unsigned short eexp_hw_readeeprom(unsigned short ioaddr, - unsigned char location); - -static unsigned short eexp_hw_lasttxstat(struct net_device *dev); -static void eexp_hw_txrestart(struct net_device *dev); - -static void eexp_hw_txinit (struct net_device *dev); -static void eexp_hw_rxinit (struct net_device *dev); - -static void eexp_hw_init586 (struct net_device *dev); -static void eexp_setup_filter (struct net_device *dev); - -static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"}; -enum eexp_iftype {AUI=0, BNC=1, TPE=2}; - -#define STARTED_RU 2 -#define STARTED_CU 1 - -/* - * Primitive hardware access functions. - */ - -static inline unsigned short scb_status(struct net_device *dev) -{ - return inw(dev->base_addr + 0xc008); -} - -static inline unsigned short scb_rdcmd(struct net_device *dev) -{ - return inw(dev->base_addr + 0xc00a); -} - -static inline void scb_command(struct net_device *dev, unsigned short cmd) -{ - outw(cmd, dev->base_addr + 0xc00a); -} - -static inline void scb_wrcbl(struct net_device *dev, unsigned short val) -{ - outw(val, dev->base_addr + 0xc00c); -} - -static inline void scb_wrrfa(struct net_device *dev, unsigned short val) -{ - outw(val, dev->base_addr + 0xc00e); -} - -static inline void set_loopback(struct net_device *dev) -{ - outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config); -} - -static inline void clear_loopback(struct net_device *dev) -{ - outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config); -} - -static inline unsigned short int SHADOW(short int addr) -{ - addr &= 0x1f; - if (addr > 0xf) addr += 0x3ff0; - return addr + 0x4000; -} - -/* - * Linux interface - */ - -/* - * checks for presence of EtherExpress card - */ - -static int __init do_express_probe(struct net_device *dev) -{ - unsigned short *port; - static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 }; - unsigned short ioaddr = dev->base_addr; - int dev_irq = dev->irq; - int err; - - dev->if_port = 0xff; /* not set */ - - if (ioaddr&0xfe00) { - if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) - return -EBUSY; - err = eexp_hw_probe(dev,ioaddr); - release_region(ioaddr, EEXP_IO_EXTENT); - return err; - } else if (ioaddr) - return -ENXIO; - - for (port=&ports[0] ; *port ; port++ ) - { - unsigned short sum = 0; - int i; - if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress")) - continue; - for ( i=0 ; i<4 ; i++ ) - { - unsigned short t; - t = inb(*port + ID_PORT); - sum |= (t>>4) << ((t & 0x03)<<2); - } - if (sum==0xbaba && !eexp_hw_probe(dev,*port)) { - release_region(*port, EEXP_IO_EXTENT); - return 0; - } - release_region(*port, EEXP_IO_EXTENT); - dev->irq = dev_irq; - } - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init express_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_express_probe(dev); - if (!err) - return dev; - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -/* - * open and initialize the adapter, ready for use - */ - -static int eexp_open(struct net_device *dev) -{ - int ret; - unsigned short ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: eexp_open()\n", dev->name); -#endif - - if (!dev->irq || !irqrmap[dev->irq]) - return -ENXIO; - - ret = request_irq(dev->irq, eexp_irq, 0, dev->name, dev); - if (ret) - return ret; - - if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr); - goto err_out1; - } - if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr+0x4000); - goto err_out2; - } - if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr+0x8000); - goto err_out3; - } - if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr+0xc000); - goto err_out4; - } - - if (lp->width) { - printk("%s: forcing ASIC to 8-bit mode\n", dev->name); - outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config); - } - - eexp_hw_init586(dev); - netif_start_queue(dev); -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name); -#endif - return 0; - - err_out4: - release_region(ioaddr+0x8000, EEXP_IO_EXTENT); - err_out3: - release_region(ioaddr+0x4000, EEXP_IO_EXTENT); - err_out2: - release_region(ioaddr, EEXP_IO_EXTENT); - err_out1: - free_irq(dev->irq, dev); - return -EBUSY; -} - -/* - * close and disable the interface, leaving the 586 in reset. - */ - -static int eexp_close(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - - int irq = dev->irq; - - netif_stop_queue(dev); - - outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ); - lp->started = 0; - scb_command(dev, SCB_CUsuspend|SCB_RUsuspend); - outb(0,ioaddr+SIGNAL_CA); - free_irq(irq,dev); - outb(i586_RST,ioaddr+EEPROM_Ctrl); - release_region(ioaddr, EEXP_IO_EXTENT); - release_region(ioaddr+0x4000, 16); - release_region(ioaddr+0x8000, 16); - release_region(ioaddr+0xc000, 16); - - return 0; -} - -/* - * This gets called when a higher level thinks we are broken. Check that - * nothing has become jammed in the CU. - */ - -static void unstick_cu(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - - if (lp->started) - { - if (time_after(jiffies, dev_trans_start(dev) + HZ/2)) - { - if (lp->tx_link==lp->last_tx_restart) - { - unsigned short boguscount=200,rsst; - printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n", - dev->name, scb_status(dev)); - eexp_hw_txinit(dev); - lp->last_tx_restart = 0; - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - while (!SCB_complete(rsst=scb_status(dev))) - { - if (!--boguscount) - { - boguscount=200; - printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n", - dev->name,rsst); - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - } - } - netif_wake_queue(dev); - } - else - { - unsigned short status = scb_status(dev); - if (SCB_CUdead(status)) - { - unsigned short txstatus = eexp_hw_lasttxstat(dev); - printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n", - dev->name, status, txstatus); - eexp_hw_txrestart(dev); - } - else - { - unsigned short txstatus = eexp_hw_lasttxstat(dev); - if (netif_queue_stopped(dev) && !txstatus) - { - printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n", - dev->name,status,txstatus); - eexp_hw_init586(dev); - netif_wake_queue(dev); - } - else - { - printk(KERN_WARNING "%s: transmit timed out\n", dev->name); - } - } - } - } - } - else - { - if (time_after(jiffies, lp->init_time + 10)) - { - unsigned short status = scb_status(dev); - printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n", - dev->name, status); - eexp_hw_init586(dev); - netif_wake_queue(dev); - } - } -} - -static void eexp_timeout(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); -#ifdef CONFIG_SMP - unsigned long flags; -#endif - int status; - - disable_irq(dev->irq); - - /* - * Best would be to use synchronize_irq(); spin_lock() here - * lets make it work first.. - */ - -#ifdef CONFIG_SMP - spin_lock_irqsave(&lp->lock, flags); -#endif - - status = scb_status(dev); - unstick_cu(dev); - printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name, - (SCB_complete(status)?"lost interrupt": - "board on fire")); - dev->stats.tx_errors++; - lp->last_tx = jiffies; - if (!SCB_complete(status)) { - scb_command(dev, SCB_CUabort); - outb(0,dev->base_addr+SIGNAL_CA); - } - netif_wake_queue(dev); -#ifdef CONFIG_SMP - spin_unlock_irqrestore(&lp->lock, flags); -#endif -} - -/* - * Called to transmit a packet, or to allow us to right ourselves - * if the kernel thinks we've died. - */ -static netdev_tx_t eexp_xmit(struct sk_buff *buf, struct net_device *dev) -{ - short length = buf->len; -#ifdef CONFIG_SMP - struct net_local *lp = netdev_priv(dev); - unsigned long flags; -#endif - -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name); -#endif - - if (buf->len < ETH_ZLEN) { - if (skb_padto(buf, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - disable_irq(dev->irq); - - /* - * Best would be to use synchronize_irq(); spin_lock() here - * lets make it work first.. - */ - -#ifdef CONFIG_SMP - spin_lock_irqsave(&lp->lock, flags); -#endif - - { - unsigned short *data = (unsigned short *)buf->data; - - dev->stats.tx_bytes += length; - - eexp_hw_tx_pio(dev,data,length); - } - dev_kfree_skb(buf); -#ifdef CONFIG_SMP - spin_unlock_irqrestore(&lp->lock, flags); -#endif - enable_irq(dev->irq); - return NETDEV_TX_OK; -} - -/* - * Handle an EtherExpress interrupt - * If we've finished initializing, start the RU and CU up. - * If we've already started, reap tx buffers, handle any received packets, - * check to make sure we've not become wedged. - */ - -static unsigned short eexp_start_irq(struct net_device *dev, - unsigned short status) -{ - unsigned short ack_cmd = SCB_ack(status); - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) { - short diag_status, tdr_status; - while (SCB_CUstat(status)==2) - status = scb_status(dev); -#if NET_DEBUG > 4 - printk("%s: CU went non-active (status %04x)\n", - dev->name, status); -#endif - - outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR); - diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT)); - if (diag_status & 1<<11) { - printk(KERN_WARNING "%s: 82586 failed self-test\n", - dev->name); - } else if (!(diag_status & 1<<13)) { - printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name); - } - - outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR); - tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT)); - if (tdr_status & (TDR_SHORT|TDR_OPEN)) { - printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : ""); - } - else if (tdr_status & TDR_XCVRPROBLEM) { - printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name); - } - else if (tdr_status & TDR_LINKOK) { -#if NET_DEBUG > 4 - printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name); -#endif - } else { - printk("%s: TDR is ga-ga (status %04x)\n", dev->name, - tdr_status); - } - - lp->started |= STARTED_CU; - scb_wrcbl(dev, lp->tx_link); - /* if the RU isn't running, start it now */ - if (!(lp->started & STARTED_RU)) { - ack_cmd |= SCB_RUstart; - scb_wrrfa(dev, lp->rx_buf_start); - lp->rx_ptr = lp->rx_buf_start; - lp->started |= STARTED_RU; - } - ack_cmd |= SCB_CUstart | 0x2000; - } - - if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4) - lp->started|=STARTED_RU; - - return ack_cmd; -} - -static void eexp_cmd_clear(struct net_device *dev) -{ - unsigned long int oldtime = jiffies; - while (scb_rdcmd(dev) && (time_before(jiffies, oldtime + 10))); - if (scb_rdcmd(dev)) { - printk("%s: command didn't clear\n", dev->name); - } -} - -static irqreturn_t eexp_irq(int dummy, void *dev_info) -{ - struct net_device *dev = dev_info; - struct net_local *lp; - unsigned short ioaddr,status,ack_cmd; - unsigned short old_read_ptr, old_write_ptr; - - lp = netdev_priv(dev); - ioaddr = dev->base_addr; - - spin_lock(&lp->lock); - - old_read_ptr = inw(ioaddr+READ_PTR); - old_write_ptr = inw(ioaddr+WRITE_PTR); - - outb(SIRQ_dis|irqrmap[dev->irq], ioaddr+SET_IRQ); - - status = scb_status(dev); - -#if NET_DEBUG > 4 - printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status); -#endif - - if (lp->started == (STARTED_CU | STARTED_RU)) { - - do { - eexp_cmd_clear(dev); - - ack_cmd = SCB_ack(status); - scb_command(dev, ack_cmd); - outb(0,ioaddr+SIGNAL_CA); - - eexp_cmd_clear(dev); - - if (SCB_complete(status)) { - if (!eexp_hw_lasttxstat(dev)) { - printk("%s: tx interrupt but no status\n", dev->name); - } - } - - if (SCB_rxdframe(status)) - eexp_hw_rx_pio(dev); - - status = scb_status(dev); - } while (status & 0xc000); - - if (SCB_RUdead(status)) - { - printk(KERN_WARNING "%s: RU stopped: status %04x\n", - dev->name,status); -#if 0 - printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd); - outw(lp->cur_rfd, ioaddr+READ_PTR); - printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT)); - outw(lp->cur_rfd+6, ioaddr+READ_PTR); - printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT)); - outw(rbd, ioaddr+READ_PTR); - printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT)); - outw(rbd+8, ioaddr+READ_PTR); - printk("[%04x]\n", inw(ioaddr+DATAPORT)); -#endif - dev->stats.rx_errors++; -#if 1 - eexp_hw_rxinit(dev); -#else - lp->cur_rfd = lp->first_rfd; -#endif - scb_wrrfa(dev, lp->rx_buf_start); - scb_command(dev, SCB_RUstart); - outb(0,ioaddr+SIGNAL_CA); - } - } else { - if (status & 0x8000) - ack_cmd = eexp_start_irq(dev, status); - else - ack_cmd = SCB_ack(status); - scb_command(dev, ack_cmd); - outb(0,ioaddr+SIGNAL_CA); - } - - eexp_cmd_clear(dev); - - outb(SIRQ_en|irqrmap[dev->irq], ioaddr+SET_IRQ); - -#if NET_DEBUG > 6 - printk("%s: leaving eexp_irq()\n", dev->name); -#endif - outw(old_read_ptr, ioaddr+READ_PTR); - outw(old_write_ptr, ioaddr+WRITE_PTR); - - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -/* - * Hardware access functions - */ - -/* - * Set the cable type to use. - */ - -static void eexp_hw_set_interface(struct net_device *dev) -{ - unsigned char oldval = inb(dev->base_addr + 0x300e); - oldval &= ~0x82; - switch (dev->if_port) { - case TPE: - oldval |= 0x2; - case BNC: - oldval |= 0x80; - break; - } - outb(oldval, dev->base_addr+0x300e); - mdelay(20); -} - -/* - * Check all the receive buffers, and hand any received packets - * to the upper levels. Basic sanity check on each frame - * descriptor, though we don't bother trying to fix broken ones. - */ - -static void eexp_hw_rx_pio(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short rx_block = lp->rx_ptr; - unsigned short boguscount = lp->num_rx_bufs; - unsigned short ioaddr = dev->base_addr; - unsigned short status; - -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name); -#endif - - do { - unsigned short rfd_cmd, rx_next, pbuf, pkt_len; - - outw(rx_block, ioaddr + READ_PTR); - status = inw(ioaddr + DATAPORT); - - if (FD_Done(status)) - { - rfd_cmd = inw(ioaddr + DATAPORT); - rx_next = inw(ioaddr + DATAPORT); - pbuf = inw(ioaddr + DATAPORT); - - outw(pbuf, ioaddr + READ_PTR); - pkt_len = inw(ioaddr + DATAPORT); - - if (rfd_cmd!=0x0000) - { - printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n", - dev->name, rfd_cmd); - continue; - } - else if (pbuf!=rx_block+0x16) - { - printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n", - dev->name, rx_block+0x16, pbuf); - continue; - } - else if ((pkt_len & 0xc000)!=0xc000) - { - printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n", - dev->name, pkt_len & 0xc000); - continue; - } - else if (!FD_OK(status)) - { - dev->stats.rx_errors++; - if (FD_CRC(status)) - dev->stats.rx_crc_errors++; - if (FD_Align(status)) - dev->stats.rx_frame_errors++; - if (FD_Resrc(status)) - dev->stats.rx_fifo_errors++; - if (FD_DMA(status)) - dev->stats.rx_over_errors++; - if (FD_Short(status)) - dev->stats.rx_length_errors++; - } - else - { - struct sk_buff *skb; - pkt_len &= 0x3fff; - skb = netdev_alloc_skb(dev, pkt_len + 16); - if (skb == NULL) - { - printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb, 2); - outw(pbuf+10, ioaddr+READ_PTR); - insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1); - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - outw(rx_block, ioaddr+WRITE_PTR); - outw(0, ioaddr+DATAPORT); - outw(0, ioaddr+DATAPORT); - rx_block = rx_next; - } - } while (FD_Done(status) && boguscount--); - lp->rx_ptr = rx_block; -} - -/* - * Hand a packet to the card for transmission - * If we get here, we MUST have already checked - * to make sure there is room in the transmit - * buffer region. - */ - -static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf, - unsigned short len) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - - if (LOCKUP16 || lp->width) { - /* Stop the CU so that there is no chance that it - jumps off to a bogus address while we are writing the - pointer to the next transmit packet in 8-bit mode -- - this eliminates the "CU wedged" errors in 8-bit mode. - (Zoltan Szilagyi 10-12-96) */ - scb_command(dev, SCB_CUsuspend); - outw(0xFFFF, ioaddr+SIGNAL_CA); - } - - outw(lp->tx_head, ioaddr + WRITE_PTR); - - outw(0x0000, ioaddr + DATAPORT); - outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT); - outw(lp->tx_head+0x08, ioaddr + DATAPORT); - outw(lp->tx_head+0x0e, ioaddr + DATAPORT); - - outw(0x0000, ioaddr + DATAPORT); - outw(0x0000, ioaddr + DATAPORT); - outw(lp->tx_head+0x08, ioaddr + DATAPORT); - - outw(0x8000|len, ioaddr + DATAPORT); - outw(-1, ioaddr + DATAPORT); - outw(lp->tx_head+0x16, ioaddr + DATAPORT); - outw(0, ioaddr + DATAPORT); - - outsw(ioaddr + DATAPORT, buf, (len+1)>>1); - - outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR); - outw(lp->tx_head, ioaddr + DATAPORT); - - dev->trans_start = jiffies; - lp->tx_tail = lp->tx_head; - if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE)) - lp->tx_head = TX_BUF_START; - else - lp->tx_head += TX_BUF_SIZE; - if (lp->tx_head != lp->tx_reap) - netif_wake_queue(dev); - - if (LOCKUP16 || lp->width) { - /* Restart the CU so that the packet can actually - be transmitted. (Zoltan Szilagyi 10-12-96) */ - scb_command(dev, SCB_CUresume); - outw(0xFFFF, ioaddr+SIGNAL_CA); - } - - dev->stats.tx_packets++; - lp->last_tx = jiffies; -} - -static const struct net_device_ops eexp_netdev_ops = { - .ndo_open = eexp_open, - .ndo_stop = eexp_close, - .ndo_start_xmit = eexp_xmit, - .ndo_set_rx_mode = eexp_set_multicast, - .ndo_tx_timeout = eexp_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* - * Sanity check the suspected EtherExpress card - * Read hardware address, reset card, size memory and initialize buffer - * memory pointers. These are held in netdev_priv(), in case someone has more - * than one card in a machine. - */ - -static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr) -{ - unsigned short hw_addr[3]; - unsigned char buswidth; - unsigned int memory_size; - int i; - unsigned short xsum = 0; - struct net_local *lp = netdev_priv(dev); - - printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr); - - outb(ASIC_RST, ioaddr+EEPROM_Ctrl); - outb(0, ioaddr+EEPROM_Ctrl); - udelay(500); - outb(i586_RST, ioaddr+EEPROM_Ctrl); - - hw_addr[0] = eexp_hw_readeeprom(ioaddr,2); - hw_addr[1] = eexp_hw_readeeprom(ioaddr,3); - hw_addr[2] = eexp_hw_readeeprom(ioaddr,4); - - /* Standard Address or Compaq LTE Address */ - if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) || - (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00)))) - { - printk(" rejected: invalid address %04x%04x%04x\n", - hw_addr[2],hw_addr[1],hw_addr[0]); - return -ENODEV; - } - - /* Calculate the EEPROM checksum. Carry on anyway if it's bad, - * though. - */ - for (i = 0; i < 64; i++) - xsum += eexp_hw_readeeprom(ioaddr, i); - if (xsum != 0xbaba) - printk(" (bad EEPROM xsum 0x%02x)", xsum); - - dev->base_addr = ioaddr; - for ( i=0 ; i<6 ; i++ ) - dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i]; - - { - static const char irqmap[] = { 0, 9, 3, 4, 5, 10, 11, 0 }; - unsigned short setupval = eexp_hw_readeeprom(ioaddr,0); - - /* Use the IRQ from EEPROM if none was given */ - if (!dev->irq) - dev->irq = irqmap[setupval>>13]; - - if (dev->if_port == 0xff) { - dev->if_port = !(setupval & 0x1000) ? AUI : - eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC; - } - - buswidth = !((setupval & 0x400) >> 10); - } - - memset(lp, 0, sizeof(struct net_local)); - spin_lock_init(&lp->lock); - - printk("(IRQ %d, %s connector, %d-bit bus", dev->irq, - eexp_ifmap[dev->if_port], buswidth?8:16); - - if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress")) - return -EBUSY; - - eexp_hw_set_interface(dev); - - release_region(dev->base_addr + 0x300e, 1); - - /* Find out how much RAM we have on the card */ - outw(0, dev->base_addr + WRITE_PTR); - for (i = 0; i < 32768; i++) - outw(0, dev->base_addr + DATAPORT); - - for (memory_size = 0; memory_size < 64; memory_size++) - { - outw(memory_size<<10, dev->base_addr + READ_PTR); - if (inw(dev->base_addr+DATAPORT)) - break; - outw(memory_size<<10, dev->base_addr + WRITE_PTR); - outw(memory_size | 0x5000, dev->base_addr+DATAPORT); - outw(memory_size<<10, dev->base_addr + READ_PTR); - if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000)) - break; - } - - /* Sort out the number of buffers. We may have 16, 32, 48 or 64k - * of RAM to play with. - */ - lp->num_tx_bufs = 4; - lp->rx_buf_end = 0x3ff6; - switch (memory_size) - { - case 64: - lp->rx_buf_end += 0x4000; - case 48: - lp->num_tx_bufs += 4; - lp->rx_buf_end += 0x4000; - case 32: - lp->rx_buf_end += 0x4000; - case 16: - printk(", %dk RAM)\n", memory_size); - break; - default: - printk(") bad memory size (%dk).\n", memory_size); - return -ENODEV; - break; - } - - lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE); - lp->width = buswidth; - - dev->netdev_ops = &eexp_netdev_ops; - dev->watchdog_timeo = 2*HZ; - - return register_netdev(dev); -} - -/* - * Read a word from the EtherExpress on-board serial EEPROM. - * The EEPROM contains 64 words of 16 bits. - */ -static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr, - unsigned char location) -{ - unsigned short cmd = 0x180|(location&0x7f); - unsigned short rval = 0,wval = EC_CS|i586_RST; - int i; - - outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl); - for (i=0x100 ; i ; i>>=1 ) - { - if (cmd&i) - wval |= EC_Wr; - else - wval &= ~EC_Wr; - - outb(wval,ioaddr+EEPROM_Ctrl); - outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - outb(wval,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - } - wval &= ~EC_Wr; - outb(wval,ioaddr+EEPROM_Ctrl); - for (i=0x8000 ; i ; i>>=1 ) - { - outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd) - rval |= i; - outb(wval,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - } - wval &= ~EC_CS; - outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - outb(wval,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - return rval; -} - -/* - * Reap tx buffers and return last transmit status. - * if ==0 then either: - * a) we're not transmitting anything, so why are we here? - * b) we've died. - * otherwise, Stat_Busy(return) means we've still got some packets - * to transmit, Stat_Done(return) means our buffers should be empty - * again - */ - -static unsigned short eexp_hw_lasttxstat(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short tx_block = lp->tx_reap; - unsigned short status; - - if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap) - return 0x0000; - - do - { - outw(tx_block & ~31, dev->base_addr + SM_PTR); - status = inw(dev->base_addr + SHADOW(tx_block)); - if (!Stat_Done(status)) - { - lp->tx_link = tx_block; - return status; - } - else - { - lp->last_tx_restart = 0; - dev->stats.collisions += Stat_NoColl(status); - if (!Stat_OK(status)) - { - char *whatsup = NULL; - dev->stats.tx_errors++; - if (Stat_Abort(status)) - dev->stats.tx_aborted_errors++; - if (Stat_TNoCar(status)) { - whatsup = "aborted, no carrier"; - dev->stats.tx_carrier_errors++; - } - if (Stat_TNoCTS(status)) { - whatsup = "aborted, lost CTS"; - dev->stats.tx_carrier_errors++; - } - if (Stat_TNoDMA(status)) { - whatsup = "FIFO underran"; - dev->stats.tx_fifo_errors++; - } - if (Stat_TXColl(status)) { - whatsup = "aborted, too many collisions"; - dev->stats.tx_aborted_errors++; - } - if (whatsup) - printk(KERN_INFO "%s: transmit %s\n", - dev->name, whatsup); - } - else - dev->stats.tx_packets++; - } - if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE)) - lp->tx_reap = tx_block = TX_BUF_START; - else - lp->tx_reap = tx_block += TX_BUF_SIZE; - netif_wake_queue(dev); - } - while (lp->tx_reap != lp->tx_head); - - lp->tx_link = lp->tx_tail + 0x08; - - return status; -} - -/* - * This should never happen. It is called when some higher routine detects - * that the CU has stopped, to try to restart it from the last packet we knew - * we were working on, or the idle loop if we had finished for the time. - */ - -static void eexp_hw_txrestart(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - - lp->last_tx_restart = lp->tx_link; - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - - { - unsigned short boguscount=50,failcount=5; - while (!scb_status(dev)) - { - if (!--boguscount) - { - if (--failcount) - { - printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev)); - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - boguscount = 100; - } - else - { - printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name); - eexp_hw_init586(dev); - netif_wake_queue(dev); - return; - } - } - } - } -} - -/* - * Writes down the list of transmit buffers into card memory. Each - * entry consists of an 82586 transmit command, followed by a jump - * pointing to itself. When we want to transmit a packet, we write - * the data into the appropriate transmit buffer and then modify the - * preceding jump to point at the new transmit command. This means that - * the 586 command unit is continuously active. - */ - -static void eexp_hw_txinit(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short tx_block = TX_BUF_START; - unsigned short curtbuf; - unsigned short ioaddr = dev->base_addr; - - for ( curtbuf=0 ; curtbufnum_tx_bufs ; curtbuf++ ) - { - outw(tx_block, ioaddr + WRITE_PTR); - - outw(0x0000, ioaddr + DATAPORT); - outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT); - outw(tx_block+0x08, ioaddr + DATAPORT); - outw(tx_block+0x0e, ioaddr + DATAPORT); - - outw(0x0000, ioaddr + DATAPORT); - outw(0x0000, ioaddr + DATAPORT); - outw(tx_block+0x08, ioaddr + DATAPORT); - - outw(0x8000, ioaddr + DATAPORT); - outw(-1, ioaddr + DATAPORT); - outw(tx_block+0x16, ioaddr + DATAPORT); - outw(0x0000, ioaddr + DATAPORT); - - tx_block += TX_BUF_SIZE; - } - lp->tx_head = TX_BUF_START; - lp->tx_reap = TX_BUF_START; - lp->tx_tail = tx_block - TX_BUF_SIZE; - lp->tx_link = lp->tx_tail + 0x08; - lp->rx_buf_start = tx_block; - -} - -/* - * Write the circular list of receive buffer descriptors to card memory. - * The end of the list isn't marked, which means that the 82586 receive - * unit will loop until buffers become available (this avoids it giving us - * "out of resources" messages). - */ - -static void eexp_hw_rxinit(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short rx_block = lp->rx_buf_start; - unsigned short ioaddr = dev->base_addr; - - lp->num_rx_bufs = 0; - lp->rx_first = lp->rx_ptr = rx_block; - do - { - lp->num_rx_bufs++; - - outw(rx_block, ioaddr + WRITE_PTR); - - outw(0, ioaddr + DATAPORT); outw(0, ioaddr+DATAPORT); - outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT); - outw(0xffff, ioaddr+DATAPORT); - - outw(0x0000, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - - outw(0x0000, ioaddr+DATAPORT); - outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT); - outw(rx_block + 0x20, ioaddr+DATAPORT); - outw(0, ioaddr+DATAPORT); - outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT); - - lp->rx_last = rx_block; - rx_block += RX_BUF_SIZE; - } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE); - - - /* Make first Rx frame descriptor point to first Rx buffer - descriptor */ - outw(lp->rx_first + 6, ioaddr+WRITE_PTR); - outw(lp->rx_first + 0x16, ioaddr+DATAPORT); - - /* Close Rx frame descriptor ring */ - outw(lp->rx_last + 4, ioaddr+WRITE_PTR); - outw(lp->rx_first, ioaddr+DATAPORT); - - /* Close Rx buffer descriptor ring */ - outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR); - outw(lp->rx_first + 0x16, ioaddr+DATAPORT); - -} - -/* - * Un-reset the 586, and start the configuration sequence. We don't wait for - * this to finish, but allow the interrupt handler to start the CU and RU for - * us. We can't start the receive/transmission system up before we know that - * the hardware is configured correctly. - */ - -static void eexp_hw_init586(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - int i; - -#if NET_DEBUG > 6 - printk("%s: eexp_hw_init586()\n", dev->name); -#endif - - lp->started = 0; - - set_loopback(dev); - - outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ); - - /* Download the startup code */ - outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR); - outw(lp->width?0x0001:0x0000, ioaddr + 0x8006); - outw(0x0000, ioaddr + 0x8008); - outw(0x0000, ioaddr + 0x800a); - outw(0x0000, ioaddr + 0x800c); - outw(0x0000, ioaddr + 0x800e); - - for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) { - int j; - outw(i, ioaddr + SM_PTR); - for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2) - outw(start_code[(i+j)/2], - ioaddr+0x4000+j); - for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2) - outw(start_code[(i+j+16)/2], - ioaddr+0x8000+j); - } - - /* Do we want promiscuous mode or multicast? */ - outw(CONF_PROMISC & ~31, ioaddr+SM_PTR); - i = inw(ioaddr+SHADOW(CONF_PROMISC)); - outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1), - ioaddr+SHADOW(CONF_PROMISC)); - lp->was_promisc = dev->flags & IFF_PROMISC; -#if 0 - eexp_setup_filter(dev); -#endif - - /* Write our hardware address */ - outw(CONF_HWADDR & ~31, ioaddr+SM_PTR); - outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR)); - outw(((unsigned short *)dev->dev_addr)[1], - ioaddr+SHADOW(CONF_HWADDR+2)); - outw(((unsigned short *)dev->dev_addr)[2], - ioaddr+SHADOW(CONF_HWADDR+4)); - - eexp_hw_txinit(dev); - eexp_hw_rxinit(dev); - - outb(0,ioaddr+EEPROM_Ctrl); - mdelay(5); - - scb_command(dev, 0xf000); - outb(0,ioaddr+SIGNAL_CA); - - outw(0, ioaddr+SM_PTR); - - { - unsigned short rboguscount=50,rfailcount=5; - while (inw(ioaddr+0x4000)) - { - if (!--rboguscount) - { - printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n", - dev->name); - scb_command(dev, 0); - outb(0,ioaddr+SIGNAL_CA); - rboguscount = 100; - if (!--rfailcount) - { - printk(KERN_WARNING "%s: i82586 not responding, giving up.\n", - dev->name); - return; - } - } - } - } - - scb_wrcbl(dev, CONF_LINK); - scb_command(dev, 0xf000|SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - - { - unsigned short iboguscount=50,ifailcount=5; - while (!scb_status(dev)) - { - if (!--iboguscount) - { - if (--ifailcount) - { - printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n", - dev->name, scb_status(dev), scb_rdcmd(dev)); - scb_wrcbl(dev, CONF_LINK); - scb_command(dev, 0xf000|SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - iboguscount = 100; - } - else - { - printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name); - return; - } - } - } - } - - clear_loopback(dev); - outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ); - - lp->init_time = jiffies; -#if NET_DEBUG > 6 - printk("%s: leaving eexp_hw_init586()\n", dev->name); -#endif -} - -static void eexp_setup_filter(struct net_device *dev) -{ - struct netdev_hw_addr *ha; - unsigned short ioaddr = dev->base_addr; - int count = netdev_mc_count(dev); - int i; - if (count > 8) { - printk(KERN_INFO "%s: too many multicast addresses (%d)\n", - dev->name, count); - count = 8; - } - - outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR); - outw(6*count, ioaddr+SHADOW(CONF_NR_MULTICAST)); - i = 0; - netdev_for_each_mc_addr(ha, dev) { - unsigned short *data = (unsigned short *) ha->addr; - - if (i == count) - break; - outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR); - outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i))); - outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR); - outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2)); - outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR); - outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4)); - i++; - } -} - -/* - * Set or clear the multicast filter for this adaptor. - */ -static void -eexp_set_multicast(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - int kick = 0, i; - if ((dev->flags & IFF_PROMISC) != lp->was_promisc) { - outw(CONF_PROMISC & ~31, ioaddr+SM_PTR); - i = inw(ioaddr+SHADOW(CONF_PROMISC)); - outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1), - ioaddr+SHADOW(CONF_PROMISC)); - lp->was_promisc = dev->flags & IFF_PROMISC; - kick = 1; - } - if (!(dev->flags & IFF_PROMISC)) { - eexp_setup_filter(dev); - if (lp->old_mc_count != netdev_mc_count(dev)) { - kick = 1; - lp->old_mc_count = netdev_mc_count(dev); - } - } - if (kick) { - unsigned long oj; - scb_command(dev, SCB_CUsuspend); - outb(0, ioaddr+SIGNAL_CA); - outb(0, ioaddr+SIGNAL_CA); -#if 0 - printk("%s: waiting for CU to go suspended\n", dev->name); -#endif - oj = jiffies; - while ((SCB_CUstat(scb_status(dev)) == 2) && - (time_before(jiffies, oj + 2000))); - if (SCB_CUstat(scb_status(dev)) == 2) - printk("%s: warning, CU didn't stop\n", dev->name); - lp->started &= ~(STARTED_CU); - scb_wrcbl(dev, CONF_LINK); - scb_command(dev, SCB_CUstart); - outb(0, ioaddr+SIGNAL_CA); - } -} - - -/* - * MODULE stuff - */ - -#ifdef MODULE - -#define EEXP_MAX_CARDS 4 /* max number of cards to support */ - -static struct net_device *dev_eexp[EEXP_MAX_CARDS]; -static int irq[EEXP_MAX_CARDS]; -static int io[EEXP_MAX_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)"); -MODULE_LICENSE("GPL"); - - -/* Ideally the user would give us io=, irq= for every card. If any parameters - * are specified, we verify and then use them. If no parameters are given, we - * autoprobe for one card only. - */ -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) { - dev = alloc_etherdev(sizeof(struct net_local)); - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (io[this_dev] == 0) { - if (this_dev) - break; - printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n"); - } - if (do_express_probe(dev) == 0) { - dev_eexp[this_dev] = dev; - found++; - continue; - } - printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]); - free_netdev(dev); - break; - } - if (found) - return 0; - return -ENXIO; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) { - struct net_device *dev = dev_eexp[this_dev]; - if (dev) { - unregister_netdev(dev); - free_netdev(dev); - } - } -} -#endif - -/* - * Local Variables: - * c-file-style: "linux" - * tab-width: 8 - * End: - */ diff --git a/drivers/net/ethernet/i825xx/eexpress.h b/drivers/net/ethernet/i825xx/eexpress.h deleted file mode 100644 index dc9c6ea..0000000 --- a/drivers/net/ethernet/i825xx/eexpress.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * eexpress.h: Intel EtherExpress16 defines - */ - -/* - * EtherExpress card register addresses - * as offsets from the base IO region (dev->base_addr) - */ - -#define DATAPORT 0x0000 -#define WRITE_PTR 0x0002 -#define READ_PTR 0x0004 -#define SIGNAL_CA 0x0006 -#define SET_IRQ 0x0007 -#define SM_PTR 0x0008 -#define MEM_Dec 0x000a -#define MEM_Ctrl 0x000b -#define MEM_Page_Ctrl 0x000c -#define Config 0x000d -#define EEPROM_Ctrl 0x000e -#define ID_PORT 0x000f -#define MEM_ECtrl 0x000f - -/* - * card register defines - */ - -/* SET_IRQ */ -#define SIRQ_en 0x08 -#define SIRQ_dis 0x00 - -/* EEPROM_Ctrl */ -#define EC_Clk 0x01 -#define EC_CS 0x02 -#define EC_Wr 0x04 -#define EC_Rd 0x08 -#define ASIC_RST 0x40 -#define i586_RST 0x80 - -#define eeprom_delay() { udelay(40); } - -/* - * i82586 Memory Configuration - */ - -/* (System Configuration Pointer) System start up block, read after 586_RST */ -#define SCP_START 0xfff6 - -/* Intermediate System Configuration Pointer */ -#define ISCP_START 0x0000 - -/* System Command Block */ -#define SCB_START 0x0008 - -/* Start of buffer region. Everything before this is used for control - * structures and the CU configuration program. The memory layout is - * determined in eexp_hw_probe(), once we know how much memory is - * available on the card. - */ - -#define TX_BUF_START 0x0100 - -#define TX_BUF_SIZE ((24+ETH_FRAME_LEN+31)&~0x1f) -#define RX_BUF_SIZE ((32+ETH_FRAME_LEN+31)&~0x1f) - -/* - * SCB defines - */ - -/* these functions take the SCB status word and test the relevant status bit */ -#define SCB_complete(s) (((s) & 0x8000) != 0) -#define SCB_rxdframe(s) (((s) & 0x4000) != 0) -#define SCB_CUdead(s) (((s) & 0x2000) != 0) -#define SCB_RUdead(s) (((s) & 0x1000) != 0) -#define SCB_ack(s) ((s) & 0xf000) - -/* Command unit status: 0=idle, 1=suspended, 2=active */ -#define SCB_CUstat(s) (((s)&0x0300)>>8) - -/* Receive unit status: 0=idle, 1=suspended, 2=out of resources, 4=ready */ -#define SCB_RUstat(s) (((s)&0x0070)>>4) - -/* SCB commands */ -#define SCB_CUnop 0x0000 -#define SCB_CUstart 0x0100 -#define SCB_CUresume 0x0200 -#define SCB_CUsuspend 0x0300 -#define SCB_CUabort 0x0400 -#define SCB_resetchip 0x0080 - -#define SCB_RUnop 0x0000 -#define SCB_RUstart 0x0010 -#define SCB_RUresume 0x0020 -#define SCB_RUsuspend 0x0030 -#define SCB_RUabort 0x0040 - -/* - * Command block defines - */ - -#define Stat_Done(s) (((s) & 0x8000) != 0) -#define Stat_Busy(s) (((s) & 0x4000) != 0) -#define Stat_OK(s) (((s) & 0x2000) != 0) -#define Stat_Abort(s) (((s) & 0x1000) != 0) -#define Stat_STFail (((s) & 0x0800) != 0) -#define Stat_TNoCar(s) (((s) & 0x0400) != 0) -#define Stat_TNoCTS(s) (((s) & 0x0200) != 0) -#define Stat_TNoDMA(s) (((s) & 0x0100) != 0) -#define Stat_TDefer(s) (((s) & 0x0080) != 0) -#define Stat_TColl(s) (((s) & 0x0040) != 0) -#define Stat_TXColl(s) (((s) & 0x0020) != 0) -#define Stat_NoColl(s) ((s) & 0x000f) - -/* Cmd_END will end AFTER the command if this is the first - * command block after an SCB_CUstart, but BEFORE the command - * for all subsequent commands. Best strategy is to place - * Cmd_INT on the last command in the sequence, followed by a - * dummy Cmd_Nop with Cmd_END after this. - */ - -#define Cmd_END 0x8000 -#define Cmd_SUS 0x4000 -#define Cmd_INT 0x2000 - -#define Cmd_Nop 0x0000 -#define Cmd_SetAddr 0x0001 -#define Cmd_Config 0x0002 -#define Cmd_MCast 0x0003 -#define Cmd_Xmit 0x0004 -#define Cmd_TDR 0x0005 -#define Cmd_Dump 0x0006 -#define Cmd_Diag 0x0007 - - -/* - * Frame Descriptor (Receive block) defines - */ - -#define FD_Done(s) (((s) & 0x8000) != 0) -#define FD_Busy(s) (((s) & 0x4000) != 0) -#define FD_OK(s) (((s) & 0x2000) != 0) - -#define FD_CRC(s) (((s) & 0x0800) != 0) -#define FD_Align(s) (((s) & 0x0400) != 0) -#define FD_Resrc(s) (((s) & 0x0200) != 0) -#define FD_DMA(s) (((s) & 0x0100) != 0) -#define FD_Short(s) (((s) & 0x0080) != 0) -#define FD_NoEOF(s) (((s) & 0x0040) != 0) - -struct rfd_header { - volatile unsigned long flags; - volatile unsigned short link; - volatile unsigned short rbd_offset; - volatile unsigned short dstaddr1; - volatile unsigned short dstaddr2; - volatile unsigned short dstaddr3; - volatile unsigned short srcaddr1; - volatile unsigned short srcaddr2; - volatile unsigned short srcaddr3; - volatile unsigned short length; - - /* This is actually a Receive Buffer Descriptor. The way we - * arrange memory means that an RBD always follows the RFD that - * points to it, so they might as well be in the same structure. - */ - volatile unsigned short actual_count; - volatile unsigned short next_rbd; - volatile unsigned short buf_addr1; - volatile unsigned short buf_addr2; - volatile unsigned short size; -}; - -/* Returned data from the Time Domain Reflectometer */ - -#define TDR_LINKOK (1<<15) -#define TDR_XCVRPROBLEM (1<<14) -#define TDR_OPEN (1<<13) -#define TDR_SHORT (1<<12) -#define TDR_TIME 0x7ff -- cgit v0.10.2 From 8a594170de2232194134d5965df92f4316a97abc Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 10 Jan 2013 18:09:44 -0500 Subject: drivers/net: delete intel i825xx based znet notebook driver This driver supported early to mid 1990's Zenith laptops, of the 2" thick variety. The driver was already dead 10+ years ago, but we see this in the source: ---------------- /* 10/2002 [...] Tested on a vintage Zenith Z-Note 433Lnp+. Probably broken on anything else. Testers (and detailed bug reports) are welcome :-). ---------------- To clarify, a 433 translates into a 486 at 33MHz, and a system with a default of 4MB RAM. I can't fault the noble effort to keep things working a decade ago, but at this point in time, there is no valid justification to continue carrying this driver along. Note that there is no associated Space.c cleanup here since this driver was using module_init to hook itself in. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 16b14a9..c3cfa57 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -79,14 +79,4 @@ config SUN3_82586 that this driver does not support 82586-based adapters on additional VME boards. -config ZNET - tristate "Zenith Z-Note support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ISA_DMA_API && X86 - ---help--- - The Zenith Z-Note notebook computer has a built-in network - (Ethernet) card, and this is the Linux driver for it. Note that the - IBM Thinkpad 300 is compatible with the Z-Note and is also supported - by this driver. Read the Ethernet-HOWTO, available from - . - endif # NET_VENDOR_I825XX diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index 4267ae7..df9e2ec 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o -obj-$(CONFIG_ZNET) += znet.o obj-$(CONFIG_LASI_82596) += lasi_82596.o obj-$(CONFIG_SNI_82596) += sni_82596.o obj-$(CONFIG_MVME16x_NET) += 82596.o diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c deleted file mode 100644 index c9479e0..0000000 --- a/drivers/net/ethernet/i825xx/znet.c +++ /dev/null @@ -1,928 +0,0 @@ -/* znet.c: An Zenith Z-Note ethernet driver for linux. */ - -/* - Written by Donald Becker. - - The author may be reached as becker@scyld.com. - This driver is based on the Linux skeleton driver. The copyright of the - skeleton driver is held by the United States Government, as represented - by DIRNSA, and it is released under the GPL. - - Thanks to Mike Hollick for alpha testing and suggestions. - - References: - The Crynwr packet driver. - - "82593 CSMA/CD Core LAN Controller" Intel datasheet, 1992 - Intel Microcommunications Databook, Vol. 1, 1990. - As usual with Intel, the documentation is incomplete and inaccurate. - I had to read the Crynwr packet driver to figure out how to actually - use the i82593, and guess at what register bits matched the loosely - related i82586. - - Theory of Operation - - The i82593 used in the Zenith Z-Note series operates using two(!) slave - DMA channels, one interrupt, and one 8-bit I/O port. - - While there several ways to configure '593 DMA system, I chose the one - that seemed commensurate with the highest system performance in the face - of moderate interrupt latency: Both DMA channels are configured as - recirculating ring buffers, with one channel (#0) dedicated to Rx and - the other channel (#1) to Tx and configuration. (Note that this is - different than the Crynwr driver, where the Tx DMA channel is initialized - before each operation. That approach simplifies operation and Tx error - recovery, but requires additional I/O in normal operation and precludes - transmit buffer chaining.) - - Both rings are set to 8192 bytes using {TX,RX}_RING_SIZE. This provides - a reasonable ring size for Rx, while simplifying DMA buffer allocation -- - DMA buffers must not cross a 128K boundary. (In truth the size selection - was influenced by my lack of '593 documentation. I thus was constrained - to use the Crynwr '593 initialization table, which sets the Rx ring size - to 8K.) - - Despite my usual low opinion about Intel-designed parts, I must admit - that the bulk data handling of the i82593 is a good design for - an integrated system, like a laptop, where using two slave DMA channels - doesn't pose a problem. I still take issue with using only a single I/O - port. In the same controlled environment there are essentially no - limitations on I/O space, and using multiple locations would eliminate - the need for multiple operations when looking at status registers, - setting the Rx ring boundary, or switching to promiscuous mode. - - I also question Zenith's selection of the '593: one of the advertised - advantages of earlier Intel parts was that if you figured out the magic - initialization incantation you could use the same part on many different - network types. Zenith's use of the "FriendlyNet" (sic) connector rather - than an on-board transceiver leads me to believe that they were planning - to take advantage of this. But, uhmmm, the '593 omits all but ethernet - functionality from the serial subsystem. - */ - -/* 10/2002 - - o Resurected for Linux 2.5+ by Marc Zyngier : - - - Removed strange DMA snooping in znet_sent_packet, which lead to - TX buffer corruption on my laptop. - - Use init_etherdev stuff. - - Use kmalloc-ed DMA buffers. - - Use as few global variables as possible. - - Use proper resources management. - - Use wireless/i82593.h as much as possible (structure, constants) - - Compiles as module or build-in. - - Now survives unplugging/replugging cable. - - Some code was taken from wavelan_cs. - - Tested on a vintage Zenith Z-Note 433Lnp+. Probably broken on - anything else. Testers (and detailed bug reports) are welcome :-). - - o TODO : - - - Properly handle multicast - - Understand why some traffic patterns add a 1s latency... - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -static char version[] __initdata = "znet.c:v1.02 9/23/94 becker@scyld.com\n"; - -#ifndef ZNET_DEBUG -#define ZNET_DEBUG 1 -#endif -static unsigned int znet_debug = ZNET_DEBUG; -module_param (znet_debug, int, 0); -MODULE_PARM_DESC (znet_debug, "ZNet debug level"); -MODULE_LICENSE("GPL"); - -/* The DMA modes we need aren't in . */ -#define DMA_RX_MODE 0x14 /* Auto init, I/O to mem, ++, demand. */ -#define DMA_TX_MODE 0x18 /* Auto init, Mem to I/O, ++, demand. */ -#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17) -#define RX_BUF_SIZE 8192 -#define TX_BUF_SIZE 8192 -#define DMA_BUF_SIZE (RX_BUF_SIZE + 16) /* 8k + 16 bytes for trailers */ - -#define TX_TIMEOUT (HZ/10) - -struct znet_private { - int rx_dma, tx_dma; - spinlock_t lock; - short sia_base, sia_size, io_size; - struct i82593_conf_block i593_init; - /* The starting, current, and end pointers for the packet buffers. */ - ushort *rx_start, *rx_cur, *rx_end; - ushort *tx_start, *tx_cur, *tx_end; - ushort tx_buf_len; /* Tx buffer length, in words. */ -}; - -/* Only one can be built-in;-> */ -static struct net_device *znet_dev; - -#define NETIDBLK_MAGIC "NETIDBLK" -#define NETIDBLK_MAGIC_SIZE 8 - -struct netidblk { - char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */ - unsigned char netid[8]; /* The physical station address */ - char nettype, globalopt; - char vendor[8]; /* The machine vendor and product name. */ - char product[8]; - char irq1, irq2; /* Interrupts, only one is currently used. */ - char dma1, dma2; - short dma_mem_misc[8]; /* DMA buffer locations (unused in Linux). */ - short iobase1, iosize1; - short iobase2, iosize2; /* Second iobase unused. */ - char driver_options; /* Misc. bits */ - char pad; -}; - -static int znet_open(struct net_device *dev); -static netdev_tx_t znet_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t znet_interrupt(int irq, void *dev_id); -static void znet_rx(struct net_device *dev); -static int znet_close(struct net_device *dev); -static void hardware_init(struct net_device *dev); -static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset); -static void znet_tx_timeout (struct net_device *dev); - -/* Request needed resources */ -static int znet_request_resources (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - - if (request_irq (dev->irq, znet_interrupt, 0, "ZNet", dev)) - goto failed; - if (request_dma (znet->rx_dma, "ZNet rx")) - goto free_irq; - if (request_dma (znet->tx_dma, "ZNet tx")) - goto free_rx_dma; - if (!request_region (znet->sia_base, znet->sia_size, "ZNet SIA")) - goto free_tx_dma; - if (!request_region (dev->base_addr, znet->io_size, "ZNet I/O")) - goto free_sia; - - return 0; /* Happy ! */ - - free_sia: - release_region (znet->sia_base, znet->sia_size); - free_tx_dma: - free_dma (znet->tx_dma); - free_rx_dma: - free_dma (znet->rx_dma); - free_irq: - free_irq (dev->irq, dev); - failed: - return -1; -} - -static void znet_release_resources (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - - release_region (znet->sia_base, znet->sia_size); - release_region (dev->base_addr, znet->io_size); - free_dma (znet->tx_dma); - free_dma (znet->rx_dma); - free_irq (dev->irq, dev); -} - -/* Keep the magical SIA stuff in a single function... */ -static void znet_transceiver_power (struct net_device *dev, int on) -{ - struct znet_private *znet = netdev_priv(dev); - unsigned char v; - - /* Turn on/off the 82501 SIA, using zenith-specific magic. */ - /* Select LAN control register */ - outb(0x10, znet->sia_base); - - if (on) - v = inb(znet->sia_base + 1) | 0x84; - else - v = inb(znet->sia_base + 1) & ~0x84; - - outb(v, znet->sia_base+1); /* Turn on/off LAN power (bit 2). */ -} - -/* Init the i82593, with current promisc/mcast configuration. - Also used from hardware_init. */ -static void znet_set_multicast_list (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - short ioaddr = dev->base_addr; - struct i82593_conf_block *cfblk = &znet->i593_init; - - memset(cfblk, 0x00, sizeof(struct i82593_conf_block)); - - /* The configuration block. What an undocumented nightmare. - The first set of values are those suggested (without explanation) - for ethernet in the Intel 82586 databook. The rest appear to be - completely undocumented, except for cryptic notes in the Crynwr - packet driver. This driver uses the Crynwr values verbatim. */ - - /* maz : Rewritten to take advantage of the wanvelan includes. - At least we have names, not just blind values */ - - /* Byte 0 */ - cfblk->fifo_limit = 10; /* = 16 B rx and 80 B tx fifo thresholds */ - cfblk->forgnesi = 0; /* 0=82C501, 1=AMD7992B compatibility */ - cfblk->fifo_32 = 1; - cfblk->d6mod = 0; /* Run in i82593 advanced mode */ - cfblk->throttle_enb = 1; - - /* Byte 1 */ - cfblk->throttle = 8; /* Continuous w/interrupts, 128-clock DMA. */ - cfblk->cntrxint = 0; /* enable continuous mode receive interrupts */ - cfblk->contin = 1; /* enable continuous mode */ - - /* Byte 2 */ - cfblk->addr_len = ETH_ALEN; - cfblk->acloc = 1; /* Disable source addr insertion by i82593 */ - cfblk->preamb_len = 2; /* 8 bytes preamble */ - cfblk->loopback = 0; /* Loopback off */ - - /* Byte 3 */ - cfblk->lin_prio = 0; /* Default priorities & backoff methods. */ - cfblk->tbofstop = 0; - cfblk->exp_prio = 0; - cfblk->bof_met = 0; - - /* Byte 4 */ - cfblk->ifrm_spc = 6; /* 96 bit times interframe spacing */ - - /* Byte 5 */ - cfblk->slottim_low = 0; /* 512 bit times slot time (low) */ - - /* Byte 6 */ - cfblk->slottim_hi = 2; /* 512 bit times slot time (high) */ - cfblk->max_retr = 15; /* 15 collisions retries */ - - /* Byte 7 */ - cfblk->prmisc = ((dev->flags & IFF_PROMISC) ? 1 : 0); /* Promiscuous mode */ - cfblk->bc_dis = 0; /* Enable broadcast reception */ - cfblk->crs_1 = 0; /* Don't transmit without carrier sense */ - cfblk->nocrc_ins = 0; /* i82593 generates CRC */ - cfblk->crc_1632 = 0; /* 32-bit Autodin-II CRC */ - cfblk->crs_cdt = 0; /* CD not to be interpreted as CS */ - - /* Byte 8 */ - cfblk->cs_filter = 0; /* CS is recognized immediately */ - cfblk->crs_src = 0; /* External carrier sense */ - cfblk->cd_filter = 0; /* CD is recognized immediately */ - - /* Byte 9 */ - cfblk->min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length */ - - /* Byte A */ - cfblk->lng_typ = 1; /* Type/length checks OFF */ - cfblk->lng_fld = 1; /* Disable 802.3 length field check */ - cfblk->rxcrc_xf = 1; /* Don't transfer CRC to memory */ - cfblk->artx = 1; /* Disable automatic retransmission */ - cfblk->sarec = 1; /* Disable source addr trig of CD */ - cfblk->tx_jabber = 0; /* Disable jabber jam sequence */ - cfblk->hash_1 = 1; /* Use bits 0-5 in mc address hash */ - cfblk->lbpkpol = 0; /* Loopback pin active high */ - - /* Byte B */ - cfblk->fdx = 0; /* Disable full duplex operation */ - - /* Byte C */ - cfblk->dummy_6 = 0x3f; /* all ones, Default multicast addresses & backoff. */ - cfblk->mult_ia = 0; /* No multiple individual addresses */ - cfblk->dis_bof = 0; /* Disable the backoff algorithm ?! */ - - /* Byte D */ - cfblk->dummy_1 = 1; /* set to 1 */ - cfblk->tx_ifs_retrig = 3; /* Hmm... Disabled */ - cfblk->mc_all = (!netdev_mc_empty(dev) || - (dev->flags & IFF_ALLMULTI)); /* multicast all mode */ - cfblk->rcv_mon = 0; /* Monitor mode disabled */ - cfblk->frag_acpt = 0; /* Do not accept fragments */ - cfblk->tstrttrs = 0; /* No start transmission threshold */ - - /* Byte E */ - cfblk->fretx = 1; /* FIFO automatic retransmission */ - cfblk->runt_eop = 0; /* drop "runt" packets */ - cfblk->hw_sw_pin = 0; /* ?? */ - cfblk->big_endn = 0; /* Big Endian ? no... */ - cfblk->syncrqs = 1; /* Synchronous DRQ deassertion... */ - cfblk->sttlen = 1; /* 6 byte status registers */ - cfblk->rx_eop = 0; /* Signal EOP on packet reception */ - cfblk->tx_eop = 0; /* Signal EOP on packet transmission */ - - /* Byte F */ - cfblk->rbuf_size = RX_BUF_SIZE >> 12; /* Set receive buffer size */ - cfblk->rcvstop = 1; /* Enable Receive Stop Register */ - - if (znet_debug > 2) { - int i; - unsigned char *c; - - for (i = 0, c = (char *) cfblk; i < sizeof (*cfblk); i++) - printk ("%02X ", c[i]); - printk ("\n"); - } - - *znet->tx_cur++ = sizeof(struct i82593_conf_block); - memcpy(znet->tx_cur, cfblk, sizeof(struct i82593_conf_block)); - znet->tx_cur += sizeof(struct i82593_conf_block)/2; - outb(OP0_CONFIGURE | CR0_CHNL, ioaddr); - - /* XXX FIXME maz : Add multicast addresses here, so having a - * multicast address configured isn't equal to IFF_ALLMULTI */ -} - -static const struct net_device_ops znet_netdev_ops = { - .ndo_open = znet_open, - .ndo_stop = znet_close, - .ndo_start_xmit = znet_send_packet, - .ndo_set_rx_mode = znet_set_multicast_list, - .ndo_tx_timeout = znet_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* The Z-Note probe is pretty easy. The NETIDBLK exists in the safe-to-probe - BIOS area. We just scan for the signature, and pull the vital parameters - out of the structure. */ - -static int __init znet_probe (void) -{ - int i; - struct netidblk *netinfo; - struct znet_private *znet; - struct net_device *dev; - char *p; - char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE); - int err = -ENOMEM; - - /* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */ - for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++) - if (*p == 'N' && - strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0) - break; - - if (p > plast) { - if (znet_debug > 1) - printk(KERN_INFO "No Z-Note ethernet adaptor found.\n"); - return -ENODEV; - } - - dev = alloc_etherdev(sizeof(struct znet_private)); - if (!dev) - return -ENOMEM; - - znet = netdev_priv(dev); - - netinfo = (struct netidblk *)p; - dev->base_addr = netinfo->iobase1; - dev->irq = netinfo->irq1; - - /* The station address is in the "netidblk" at 0x0f0000. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = netinfo->netid[i]; - - printk(KERN_INFO "%s: ZNET at %#3lx, %pM" - ", using IRQ %d DMA %d and %d.\n", - dev->name, dev->base_addr, dev->dev_addr, - dev->irq, netinfo->dma1, netinfo->dma2); - - if (znet_debug > 1) { - printk(KERN_INFO "%s: vendor '%16.16s' IRQ1 %d IRQ2 %d DMA1 %d DMA2 %d.\n", - dev->name, netinfo->vendor, - netinfo->irq1, netinfo->irq2, - netinfo->dma1, netinfo->dma2); - printk(KERN_INFO "%s: iobase1 %#x size %d iobase2 %#x size %d net type %2.2x.\n", - dev->name, netinfo->iobase1, netinfo->iosize1, - netinfo->iobase2, netinfo->iosize2, netinfo->nettype); - } - - if (znet_debug > 0) - printk(KERN_INFO "%s", version); - - znet->rx_dma = netinfo->dma1; - znet->tx_dma = netinfo->dma2; - spin_lock_init(&znet->lock); - znet->sia_base = 0xe6; /* Magic address for the 82501 SIA */ - znet->sia_size = 2; - /* maz: Despite the '593 being advertised above as using a - * single 8bits I/O port, this driver does many 16bits - * access. So set io_size accordingly */ - znet->io_size = 2; - - if (!(znet->rx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA))) - goto free_dev; - if (!(znet->tx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA))) - goto free_rx; - - if (!dma_page_eq (znet->rx_start, znet->rx_start + (RX_BUF_SIZE/2-1)) || - !dma_page_eq (znet->tx_start, znet->tx_start + (TX_BUF_SIZE/2-1))) { - printk (KERN_WARNING "tx/rx crossing DMA frontiers, giving up\n"); - goto free_tx; - } - - znet->rx_end = znet->rx_start + RX_BUF_SIZE/2; - znet->tx_buf_len = TX_BUF_SIZE/2; - znet->tx_end = znet->tx_start + znet->tx_buf_len; - - /* The ZNET-specific entries in the device structure. */ - dev->netdev_ops = &znet_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - err = register_netdev(dev); - if (err) - goto free_tx; - znet_dev = dev; - return 0; - - free_tx: - kfree(znet->tx_start); - free_rx: - kfree(znet->rx_start); - free_dev: - free_netdev(dev); - return err; -} - - -static int znet_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (znet_debug > 2) - printk(KERN_DEBUG "%s: znet_open() called.\n", dev->name); - - /* These should never fail. You can't add devices to a sealed box! */ - if (znet_request_resources (dev)) { - printk(KERN_WARNING "%s: Not opened -- resource busy?!?\n", dev->name); - return -EBUSY; - } - - znet_transceiver_power (dev, 1); - - /* According to the Crynwr driver we should wait 50 msec. for the - LAN clock to stabilize. My experiments indicates that the '593 can - be initialized immediately. The delay is probably needed for the - DC-to-DC converter to come up to full voltage, and for the oscillator - to be spot-on at 20Mhz before transmitting. - Until this proves to be a problem we rely on the higher layers for the - delay and save allocating a timer entry. */ - - /* maz : Well, I'm getting every time the following message - * without the delay on a 486@33. This machine is much too - * fast... :-) So maybe the Crynwr driver wasn't wrong after - * all, even if the message is completly harmless on my - * setup. */ - mdelay (50); - - /* This follows the packet driver's lead, and checks for success. */ - if (inb(ioaddr) != 0x10 && inb(ioaddr) != 0x00) - printk(KERN_WARNING "%s: Problem turning on the transceiver power.\n", - dev->name); - - hardware_init(dev); - netif_start_queue (dev); - - return 0; -} - - -static void znet_tx_timeout (struct net_device *dev) -{ - int ioaddr = dev->base_addr; - ushort event, tx_status, rx_offset, state; - - outb (CR0_STATUS_0, ioaddr); - event = inb (ioaddr); - outb (CR0_STATUS_1, ioaddr); - tx_status = inw (ioaddr); - outb (CR0_STATUS_2, ioaddr); - rx_offset = inw (ioaddr); - outb (CR0_STATUS_3, ioaddr); - state = inb (ioaddr); - printk (KERN_WARNING "%s: transmit timed out, status %02x %04x %04x %02x," - " resetting.\n", dev->name, event, tx_status, rx_offset, state); - if (tx_status == TX_LOST_CRS) - printk (KERN_WARNING "%s: Tx carrier error, check transceiver cable.\n", - dev->name); - outb (OP0_RESET, ioaddr); - hardware_init (dev); - netif_wake_queue (dev); -} - -static netdev_tx_t znet_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct znet_private *znet = netdev_priv(dev); - unsigned long flags; - short length = skb->len; - - if (znet_debug > 4) - printk(KERN_DEBUG "%s: ZNet_send_packet.\n", dev->name); - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - netif_stop_queue (dev); - - /* Check that the part hasn't reset itself, probably from suspend. */ - outb(CR0_STATUS_0, ioaddr); - if (inw(ioaddr) == 0x0010 && - inw(ioaddr) == 0x0000 && - inw(ioaddr) == 0x0010) { - if (znet_debug > 1) - printk (KERN_WARNING "%s : waking up\n", dev->name); - hardware_init(dev); - znet_transceiver_power (dev, 1); - } - - if (1) { - unsigned char *buf = (void *)skb->data; - ushort *tx_link = znet->tx_cur - 1; - ushort rnd_len = (length + 1)>>1; - - dev->stats.tx_bytes+=length; - - if (znet->tx_cur >= znet->tx_end) - znet->tx_cur = znet->tx_start; - *znet->tx_cur++ = length; - if (znet->tx_cur + rnd_len + 1 > znet->tx_end) { - int semi_cnt = (znet->tx_end - znet->tx_cur)<<1; /* Cvrt to byte cnt. */ - memcpy(znet->tx_cur, buf, semi_cnt); - rnd_len -= semi_cnt>>1; - memcpy(znet->tx_start, buf + semi_cnt, length - semi_cnt); - znet->tx_cur = znet->tx_start + rnd_len; - } else { - memcpy(znet->tx_cur, buf, skb->len); - znet->tx_cur += rnd_len; - } - *znet->tx_cur++ = 0; - - spin_lock_irqsave(&znet->lock, flags); - { - *tx_link = OP0_TRANSMIT | CR0_CHNL; - /* Is this always safe to do? */ - outb(OP0_TRANSMIT | CR0_CHNL, ioaddr); - } - spin_unlock_irqrestore (&znet->lock, flags); - - netif_start_queue (dev); - - if (znet_debug > 4) - printk(KERN_DEBUG "%s: Transmitter queued, length %d.\n", dev->name, length); - } - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* The ZNET interrupt handler. */ -static irqreturn_t znet_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct znet_private *znet = netdev_priv(dev); - int ioaddr; - int boguscnt = 20; - int handled = 0; - - spin_lock (&znet->lock); - - ioaddr = dev->base_addr; - - outb(CR0_STATUS_0, ioaddr); - do { - ushort status = inb(ioaddr); - if (znet_debug > 5) { - ushort result, rx_ptr, running; - outb(CR0_STATUS_1, ioaddr); - result = inw(ioaddr); - outb(CR0_STATUS_2, ioaddr); - rx_ptr = inw(ioaddr); - outb(CR0_STATUS_3, ioaddr); - running = inb(ioaddr); - printk(KERN_DEBUG "%s: interrupt, status %02x, %04x %04x %02x serial %d.\n", - dev->name, status, result, rx_ptr, running, boguscnt); - } - if ((status & SR0_INTERRUPT) == 0) - break; - - handled = 1; - - if ((status & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE || - (status & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE || - (status & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) { - int tx_status; - outb(CR0_STATUS_1, ioaddr); - tx_status = inw(ioaddr); - /* It's undocumented, but tx_status seems to match the i82586. */ - if (tx_status & TX_OK) { - dev->stats.tx_packets++; - dev->stats.collisions += tx_status & TX_NCOL_MASK; - } else { - if (tx_status & (TX_LOST_CTS | TX_LOST_CRS)) - dev->stats.tx_carrier_errors++; - if (tx_status & TX_UND_RUN) - dev->stats.tx_fifo_errors++; - if (!(tx_status & TX_HRT_BEAT)) - dev->stats.tx_heartbeat_errors++; - if (tx_status & TX_MAX_COL) - dev->stats.tx_aborted_errors++; - /* ...and the catch-all. */ - if ((tx_status | (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) != (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) - dev->stats.tx_errors++; - - /* Transceiver may be stuck if cable - * was removed while emitting a - * packet. Flip it off, then on to - * reset it. This is very empirical, - * but it seems to work. */ - - znet_transceiver_power (dev, 0); - znet_transceiver_power (dev, 1); - } - netif_wake_queue (dev); - } - - if ((status & SR0_RECEPTION) || - (status & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) { - znet_rx(dev); - } - /* Clear the interrupts we've handled. */ - outb(CR0_INT_ACK, ioaddr); - } while (boguscnt--); - - spin_unlock (&znet->lock); - - return IRQ_RETVAL(handled); -} - -static void znet_rx(struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - int ioaddr = dev->base_addr; - int boguscount = 1; - short next_frame_end_offset = 0; /* Offset of next frame start. */ - short *cur_frame_end; - short cur_frame_end_offset; - - outb(CR0_STATUS_2, ioaddr); - cur_frame_end_offset = inw(ioaddr); - - if (cur_frame_end_offset == znet->rx_cur - znet->rx_start) { - printk(KERN_WARNING "%s: Interrupted, but nothing to receive, offset %03x.\n", - dev->name, cur_frame_end_offset); - return; - } - - /* Use same method as the Crynwr driver: construct a forward list in - the same area of the backwards links we now have. This allows us to - pass packets to the upper layers in the order they were received -- - important for fast-path sequential operations. */ - while (znet->rx_start + cur_frame_end_offset != znet->rx_cur && - ++boguscount < 5) { - unsigned short hi_cnt, lo_cnt, hi_status, lo_status; - int count, status; - - if (cur_frame_end_offset < 4) { - /* Oh no, we have a special case: the frame trailer wraps around - the end of the ring buffer. We've saved space at the end of - the ring buffer for just this problem. */ - memcpy(znet->rx_end, znet->rx_start, 8); - cur_frame_end_offset += (RX_BUF_SIZE/2); - } - cur_frame_end = znet->rx_start + cur_frame_end_offset - 4; - - lo_status = *cur_frame_end++; - hi_status = *cur_frame_end++; - status = ((hi_status & 0xff) << 8) + (lo_status & 0xff); - lo_cnt = *cur_frame_end++; - hi_cnt = *cur_frame_end++; - count = ((hi_cnt & 0xff) << 8) + (lo_cnt & 0xff); - - if (znet_debug > 5) - printk(KERN_DEBUG "Constructing trailer at location %03x, %04x %04x %04x %04x" - " count %#x status %04x.\n", - cur_frame_end_offset<<1, lo_status, hi_status, lo_cnt, hi_cnt, - count, status); - cur_frame_end[-4] = status; - cur_frame_end[-3] = next_frame_end_offset; - cur_frame_end[-2] = count; - next_frame_end_offset = cur_frame_end_offset; - cur_frame_end_offset -= ((count + 1)>>1) + 3; - if (cur_frame_end_offset < 0) - cur_frame_end_offset += RX_BUF_SIZE/2; - } - - /* Now step forward through the list. */ - do { - ushort *this_rfp_ptr = znet->rx_start + next_frame_end_offset; - int status = this_rfp_ptr[-4]; - int pkt_len = this_rfp_ptr[-2]; - - if (znet_debug > 5) - printk(KERN_DEBUG "Looking at trailer ending at %04x status %04x length %03x" - " next %04x.\n", next_frame_end_offset<<1, status, pkt_len, - this_rfp_ptr[-3]<<1); - /* Once again we must assume that the i82586 docs apply. */ - if ( ! (status & RX_RCV_OK)) { /* There was an error. */ - dev->stats.rx_errors++; - if (status & RX_CRC_ERR) dev->stats.rx_crc_errors++; - if (status & RX_ALG_ERR) dev->stats.rx_frame_errors++; -#if 0 - if (status & 0x0200) dev->stats.rx_over_errors++; /* Wrong. */ - if (status & 0x0100) dev->stats.rx_fifo_errors++; -#else - /* maz : Wild guess... */ - if (status & RX_OVRRUN) dev->stats.rx_over_errors++; -#endif - if (status & RX_SRT_FRM) dev->stats.rx_length_errors++; - } else if (pkt_len > 1536) { - dev->stats.rx_length_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len); - if (skb == NULL) { - if (znet_debug) - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - break; - } - - if (&znet->rx_cur[(pkt_len+1)>>1] > znet->rx_end) { - int semi_cnt = (znet->rx_end - znet->rx_cur)<<1; - memcpy(skb_put(skb,semi_cnt), znet->rx_cur, semi_cnt); - memcpy(skb_put(skb,pkt_len-semi_cnt), znet->rx_start, - pkt_len - semi_cnt); - } else { - memcpy(skb_put(skb,pkt_len), znet->rx_cur, pkt_len); - if (znet_debug > 6) { - unsigned int *packet = (unsigned int *) skb->data; - printk(KERN_DEBUG "Packet data is %08x %08x %08x %08x.\n", packet[0], - packet[1], packet[2], packet[3]); - } - } - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - znet->rx_cur = this_rfp_ptr; - if (znet->rx_cur >= znet->rx_end) - znet->rx_cur -= RX_BUF_SIZE/2; - update_stop_hit(ioaddr, (znet->rx_cur - znet->rx_start)<<1); - next_frame_end_offset = this_rfp_ptr[-3]; - if (next_frame_end_offset == 0) /* Read all the frames? */ - break; /* Done for now */ - this_rfp_ptr = znet->rx_start + next_frame_end_offset; - } while (--boguscount); - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(INET_BH) for us and will work on them - when we get to the bottom-half routine. */ -} - -/* The inverse routine to znet_open(). */ -static int znet_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - netif_stop_queue (dev); - - outb(OP0_RESET, ioaddr); /* CMD0_RESET */ - - if (znet_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - /* Turn off transceiver power. */ - znet_transceiver_power (dev, 0); - - znet_release_resources (dev); - - return 0; -} - -static void show_dma(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - unsigned char stat = inb (ioaddr); - struct znet_private *znet = netdev_priv(dev); - unsigned long flags; - short dma_port = ((znet->tx_dma&3)<<2) + IO_DMA2_BASE; - unsigned addr = inb(dma_port); - short residue; - - addr |= inb(dma_port) << 8; - residue = get_dma_residue(znet->tx_dma); - - if (znet_debug > 1) { - flags=claim_dma_lock(); - printk(KERN_DEBUG "Stat:%02x Addr: %04x cnt:%3x\n", - stat, addr<<1, residue); - release_dma_lock(flags); - } -} - -/* Initialize the hardware. We have to do this when the board is open()ed - or when we come out of suspend mode. */ -static void hardware_init(struct net_device *dev) -{ - unsigned long flags; - short ioaddr = dev->base_addr; - struct znet_private *znet = netdev_priv(dev); - - znet->rx_cur = znet->rx_start; - znet->tx_cur = znet->tx_start; - - /* Reset the chip, and start it up. */ - outb(OP0_RESET, ioaddr); - - flags=claim_dma_lock(); - disable_dma(znet->rx_dma); /* reset by an interrupting task. */ - clear_dma_ff(znet->rx_dma); - set_dma_mode(znet->rx_dma, DMA_RX_MODE); - set_dma_addr(znet->rx_dma, isa_virt_to_bus(znet->rx_start)); - set_dma_count(znet->rx_dma, RX_BUF_SIZE); - enable_dma(znet->rx_dma); - /* Now set up the Tx channel. */ - disable_dma(znet->tx_dma); - clear_dma_ff(znet->tx_dma); - set_dma_mode(znet->tx_dma, DMA_TX_MODE); - set_dma_addr(znet->tx_dma, isa_virt_to_bus(znet->tx_start)); - set_dma_count(znet->tx_dma, znet->tx_buf_len<<1); - enable_dma(znet->tx_dma); - release_dma_lock(flags); - - if (znet_debug > 1) - printk(KERN_DEBUG "%s: Initializing the i82593, rx buf %p tx buf %p\n", - dev->name, znet->rx_start,znet->tx_start); - /* Do an empty configure command, just like the Crynwr driver. This - resets to chip to its default values. */ - *znet->tx_cur++ = 0; - *znet->tx_cur++ = 0; - show_dma(dev); - outb(OP0_CONFIGURE | CR0_CHNL, ioaddr); - - znet_set_multicast_list (dev); - - *znet->tx_cur++ = 6; - memcpy(znet->tx_cur, dev->dev_addr, 6); - znet->tx_cur += 3; - show_dma(dev); - outb(OP0_IA_SETUP | CR0_CHNL, ioaddr); - show_dma(dev); - - update_stop_hit(ioaddr, 8192); - if (znet_debug > 1) printk(KERN_DEBUG "enabling Rx.\n"); - outb(OP0_RCV_ENABLE, ioaddr); - netif_start_queue (dev); -} - -static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset) -{ - outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, ioaddr); - if (znet_debug > 5) - printk(KERN_DEBUG "Updating stop hit with value %02x.\n", - (rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE); - outb((rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE, ioaddr); - outb(OP1_SWIT_TO_PORT_0, ioaddr); -} - -static __exit void znet_cleanup (void) -{ - if (znet_dev) { - struct znet_private *znet = netdev_priv(znet_dev); - - unregister_netdev (znet_dev); - kfree (znet->rx_start); - kfree (znet->tx_start); - free_netdev (znet_dev); - } -} - -module_init (znet_probe); -module_exit (znet_cleanup); -- cgit v0.10.2 From 04861c535d1f5bad0fd537820116c0429a2dfe4b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 10 Jan 2013 18:12:04 -0500 Subject: drivers/net: delete Racal Interlan ISA ni52 (i825xx) driver Like the other drivers that were in the ISA i825xx family, the ni52 was rather rare, not widely used, and hence perhaps not as reliable as the more mainstream ISA drivers that were heavily used. Given that, it is chosen for retirement at this time as well. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 726b17b..b69dac1 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -51,7 +51,6 @@ extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); extern struct net_device *e2100_probe(int unit); extern struct net_device *ni5010_probe(int unit); -extern struct net_device *ni52_probe(int unit); extern struct net_device *ni65_probe(int unit); extern struct net_device *sonic_probe(int unit); extern struct net_device *seeq8005_probe(int unit); @@ -157,9 +156,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_NI5010 {ni5010_probe, 0}, #endif -#ifdef CONFIG_NI52 - {ni52_probe, 0}, -#endif #ifdef CONFIG_NI65 {ni65_probe, 0}, #endif diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index c3cfa57..955d929 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -52,17 +52,6 @@ config MVME16x_NET driver for this chip in your kernel. To compile this driver as a module, choose M here. -config NI52 - tristate "NI5210 support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called ni52. - config SNI_82596 tristate "SNI RM ethernet" depends on SNI_RM diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index df9e2ec..8c8dcd2 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -3,7 +3,6 @@ # obj-$(CONFIG_ARM_ETHER1) += ether1.o -obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o obj-$(CONFIG_LASI_82596) += lasi_82596.o obj-$(CONFIG_SNI_82596) += sni_82596.o diff --git a/drivers/net/ethernet/i825xx/ni52.c b/drivers/net/ethernet/i825xx/ni52.c deleted file mode 100644 index 272976e..0000000 --- a/drivers/net/ethernet/i825xx/ni52.c +++ /dev/null @@ -1,1346 +0,0 @@ -/* - * net-3-driver for the NI5210 card (i82586 Ethernet chip) - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later) - * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de) - * [feel free to mail ....] - * - * when using as module: (no autoprobing!) - * run with e.g: - * insmod ni52.o io=0x360 irq=9 memstart=0xd0000 memend=0xd4000 - * - * CAN YOU PLEASE REPORT ME YOUR PERFORMANCE EXPERIENCES !!. - * - * If you find a bug, please report me: - * The kernel panic output and any kmsg from the ni52 driver - * the ni5210-driver-version and the linux-kernel version - * how many shared memory (memsize) on the netcard, - * bootprom: yes/no, base_addr, mem_start - * maybe the ni5210-card revision and the i82586 version - * - * autoprobe for: base_addr: 0x300,0x280,0x360,0x320,0x340 - * mem_start: 0xd0000,0xd2000,0xc8000,0xca000,0xd4000,0xd6000, - * 0xd8000,0xcc000,0xce000,0xda000,0xdc000 - * - * sources: - * skeleton.c from Donald Becker - * - * I have also done a look in the following sources: (mail me if you need them) - * crynwr-packet-driver by Russ Nelson - * Garret A. Wollman's (fourth) i82586-driver for BSD - * (before getting an i82596 (yes 596 not 586) manual, the existing drivers - * helped me a lot to understand this tricky chip.) - * - * Known Problems: - * The internal sysbus seems to be slow. So we often lose packets because of - * overruns while receiving from a fast remote host. - * This can slow down TCP connections. Maybe the newer ni5210 cards are - * better. My experience is, that if a machine sends with more than about - * 500-600K/s the fifo/sysbus overflows. - * - * IMPORTANT NOTE: - * On fast networks, it's a (very) good idea to have 16K shared memory. With - * 8K, we can store only 4 receive frames, so it can (easily) happen that a - * remote machine 'overruns' our system. - * - * Known i82586/card problems (I'm sure, there are many more!): - * Running the NOP-mode, the i82586 sometimes seems to forget to report - * every xmit-interrupt until we restart the CU. - * Another MAJOR bug is, that the RU sometimes seems to ignore the EL-Bit - * in the RBD-Struct which indicates an end of the RBD queue. - * Instead, the RU fetches another (randomly selected and - * usually used) RBD and begins to fill it. (Maybe, this happens only if - * the last buffer from the previous RFD fits exact into the queue and - * the next RFD can't fetch an initial RBD. Anyone knows more? ) - * - * results from ftp performance tests with Linux 1.2.5 - * send and receive about 350-400 KByte/s (peak up to 460 kbytes/s) - * sending in NOP-mode: peak performance up to 530K/s (but better don't - * run this mode) - */ - -/* - * 29.Sept.96: virt_to_bus changes for new memory scheme - * 19.Feb.96: more Mcast changes, module support (MH) - * - * 18.Nov.95: Mcast changes (AC). - * - * 23.April.95: fixed(?) receiving problems by configuring a RFD more - * than the number of RBD's. Can maybe cause other problems. - * 18.April.95: Added MODULE support (MH) - * 17.April.95: MC related changes in init586() and set_multicast_list(). - * removed use of 'jiffies' in init586() (MH) - * - * 19.Sep.94: Added Multicast support (not tested yet) (MH) - * - * 18.Sep.94: Workaround for 'EL-Bug'. Removed flexible RBD-handling. - * Now, every RFD has exact one RBD. (MH) - * - * 14.Sep.94: added promiscuous mode, a few cleanups (MH) - * - * 19.Aug.94: changed request_irq() parameter (MH) - * - * 20.July.94: removed cleanup bugs, removed a 16K-mem-probe-bug (MH) - * - * 19.July.94: lotsa cleanups .. (MH) - * - * 17.July.94: some patches ... verified to run with 1.1.29 (MH) - * - * 4.July.94: patches for Linux 1.1.24 (MH) - * - * 26.March.94: patches for Linux 1.0 and iomem-auto-probe (MH) - * - * 30.Sep.93: Added nop-chain .. driver now runs with only one Xmit-Buff, - * too (MH) - * - * < 30.Sep.93: first versions - */ - -static int debuglevel; /* debug-printk 0: off 1: a few 2: more */ -static int automatic_resume; /* experimental .. better should be zero */ -static int rfdadd; /* rfdadd=1 may be better for 8K MEM cards */ -static int fifo = 0x8; /* don't change */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "ni52.h" - -#define DRV_NAME "ni52" - -#define DEBUG /* debug on */ -#define SYSBUSVAL 1 /* 8 Bit */ - -#define ni_attn586() { outb(0, dev->base_addr + NI52_ATTENTION); } -#define ni_reset586() { outb(0, dev->base_addr + NI52_RESET); } -#define ni_disint() { outb(0, dev->base_addr + NI52_INTDIS); } -#define ni_enaint() { outb(0, dev->base_addr + NI52_INTENA); } - -#define make32(ptr16) ((void __iomem *)(p->memtop + (short) (ptr16))) -#define make24(ptr32) ((char __iomem *)(ptr32)) - p->base -#define make16(ptr32) ((unsigned short) ((char __iomem *)(ptr32)\ - - p->memtop)) - -/******************* how to calculate the buffers ***************************** - - * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works - * --------------- in a different (more stable?) mode. Only in this mode it's - * possible to configure the driver with 'NO_NOPCOMMANDS' - -sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8; -sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT -sizeof(rfd) = 24; sizeof(rbd) = 12; -sizeof(tbd) = 8; sizeof(transmit_cmd) = 16; -sizeof(nop_cmd) = 8; - - * if you don't know the driver, better do not change these values: */ - -#define RECV_BUFF_SIZE 1524 /* slightly oversized */ -#define XMIT_BUFF_SIZE 1524 /* slightly oversized */ -#define NUM_XMIT_BUFFS 1 /* config for both, 8K and 16K shmem */ -#define NUM_RECV_BUFFS_8 4 /* config for 8K shared mem */ -#define NUM_RECV_BUFFS_16 9 /* config for 16K shared mem */ -#define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */ - -/**************************************************************************/ - - -#define NI52_TOTAL_SIZE 16 -#define NI52_ADDR0 0x02 -#define NI52_ADDR1 0x07 -#define NI52_ADDR2 0x01 - -static int ni52_probe1(struct net_device *dev, int ioaddr); -static irqreturn_t ni52_interrupt(int irq, void *dev_id); -static int ni52_open(struct net_device *dev); -static int ni52_close(struct net_device *dev); -static netdev_tx_t ni52_send_packet(struct sk_buff *, struct net_device *); -static struct net_device_stats *ni52_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void ni52_timeout(struct net_device *dev); - -/* helper-functions */ -static int init586(struct net_device *dev); -static int check586(struct net_device *dev, unsigned size); -static void alloc586(struct net_device *dev); -static void startrecv586(struct net_device *dev); -static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr); -static void ni52_rcv_int(struct net_device *dev); -static void ni52_xmt_int(struct net_device *dev); -static void ni52_rnr_int(struct net_device *dev); - -struct priv { - char __iomem *base; - char __iomem *mapped; - char __iomem *memtop; - spinlock_t spinlock; - int reset; - struct rfd_struct __iomem *rfd_last, *rfd_top, *rfd_first; - struct scp_struct __iomem *scp; - struct iscp_struct __iomem *iscp; - struct scb_struct __iomem *scb; - struct tbd_struct __iomem *xmit_buffs[NUM_XMIT_BUFFS]; -#if (NUM_XMIT_BUFFS == 1) - struct transmit_cmd_struct __iomem *xmit_cmds[2]; - struct nop_cmd_struct __iomem *nop_cmds[2]; -#else - struct transmit_cmd_struct __iomem *xmit_cmds[NUM_XMIT_BUFFS]; - struct nop_cmd_struct __iomem *nop_cmds[NUM_XMIT_BUFFS]; -#endif - int nop_point, num_recv_buffs; - char __iomem *xmit_cbuffs[NUM_XMIT_BUFFS]; - int xmit_count, xmit_last; -}; - -/* wait for command with timeout: */ -static void wait_for_scb_cmd(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - int i; - for (i = 0; i < 16384; i++) { - if (readb(&p->scb->cmd_cuc) == 0) - break; - udelay(4); - if (i == 16383) { - printk(KERN_ERR "%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n", - dev->name, readb(&p->scb->cmd_cuc), readb(&p->scb->cus)); - if (!p->reset) { - p->reset = 1; - ni_reset586(); - } - } - } -} - -static void wait_for_scb_cmd_ruc(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - int i; - for (i = 0; i < 16384; i++) { - if (readb(&p->scb->cmd_ruc) == 0) - break; - udelay(4); - if (i == 16383) { - printk(KERN_ERR "%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n", - dev->name, readb(&p->scb->cmd_ruc), - readb(&p->scb->rus)); - if (!p->reset) { - p->reset = 1; - ni_reset586(); - } - } - } -} - -static void wait_for_stat_compl(void __iomem *p) -{ - struct nop_cmd_struct __iomem *addr = p; - int i; - for (i = 0; i < 32767; i++) { - if (readw(&((addr)->cmd_status)) & STAT_COMPL) - break; - udelay(32); - } -} - -/********************************************** - * close device - */ -static int ni52_close(struct net_device *dev) -{ - free_irq(dev->irq, dev); - ni_reset586(); /* the hard way to stop the receiver */ - netif_stop_queue(dev); - return 0; -} - -/********************************************** - * open device - */ -static int ni52_open(struct net_device *dev) -{ - int ret; - - ni_disint(); - alloc586(dev); - init586(dev); - startrecv586(dev); - ni_enaint(); - - ret = request_irq(dev->irq, ni52_interrupt, 0, dev->name, dev); - if (ret) { - ni_reset586(); - return ret; - } - netif_start_queue(dev); - return 0; /* most done by init */ -} - -static int check_iscp(struct net_device *dev, void __iomem *addr) -{ - struct iscp_struct __iomem *iscp = addr; - struct priv *p = netdev_priv(dev); - memset_io(iscp, 0, sizeof(struct iscp_struct)); - - writel(make24(iscp), &p->scp->iscp); - writeb(1, &iscp->busy); - - ni_reset586(); - ni_attn586(); - mdelay(32); /* wait a while... */ - /* i82586 clears 'busy' after successful init */ - if (readb(&iscp->busy)) - return 0; - return 1; -} - -/********************************************** - * Check to see if there's an 82586 out there. - */ -static int check586(struct net_device *dev, unsigned size) -{ - struct priv *p = netdev_priv(dev); - int i; - - p->mapped = ioremap(dev->mem_start, size); - if (!p->mapped) - return 0; - - p->base = p->mapped + size - 0x01000000; - p->memtop = p->mapped + size; - p->scp = (struct scp_struct __iomem *)(p->base + SCP_DEFAULT_ADDRESS); - p->scb = (struct scb_struct __iomem *) p->mapped; - p->iscp = (struct iscp_struct __iomem *)p->scp - 1; - memset_io(p->scp, 0, sizeof(struct scp_struct)); - for (i = 0; i < sizeof(struct scp_struct); i++) - /* memory was writeable? */ - if (readb((char __iomem *)p->scp + i)) - goto Enodev; - writeb(SYSBUSVAL, &p->scp->sysbus); /* 1 = 8Bit-Bus, 0 = 16 Bit */ - if (readb(&p->scp->sysbus) != SYSBUSVAL) - goto Enodev; - - if (!check_iscp(dev, p->mapped)) - goto Enodev; - if (!check_iscp(dev, p->iscp)) - goto Enodev; - return 1; -Enodev: - iounmap(p->mapped); - return 0; -} - -/****************************************************************** - * set iscp at the right place, called by ni52_probe1 and open586. - */ -static void alloc586(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - - ni_reset586(); - mdelay(32); - - memset_io(p->iscp, 0, sizeof(struct iscp_struct)); - memset_io(p->scp , 0, sizeof(struct scp_struct)); - - writel(make24(p->iscp), &p->scp->iscp); - writeb(SYSBUSVAL, &p->scp->sysbus); - writew(make16(p->scb), &p->iscp->scb_offset); - - writeb(1, &p->iscp->busy); - ni_reset586(); - ni_attn586(); - - mdelay(32); - - if (readb(&p->iscp->busy)) - printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name); - - p->reset = 0; - - memset_io(p->scb, 0, sizeof(struct scb_struct)); -} - -/* set: io,irq,memstart,memend or set it when calling insmod */ -static int irq = 9; -static int io = 0x300; -static long memstart; /* e.g 0xd0000 */ -static long memend; /* e.g 0xd4000 */ - -/********************************************** - * probe the ni5210-card - */ -struct net_device * __init ni52_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct priv)); - static const int ports[] = {0x300, 0x280, 0x360, 0x320, 0x340, 0}; - const int *port; - struct priv *p; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - p = netdev_priv(dev); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - memstart = dev->mem_start; - memend = dev->mem_end; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = ni52_probe1(dev, io); - } else if (io > 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = ports; *port && ni52_probe1(dev, *port) ; port++) - ; - if (*port) - goto got_it; -#ifdef FULL_IO_PROBE - for (io = 0x200; io < 0x400 && ni52_probe1(dev, io); io += 8) - ; - if (io < 0x400) - goto got_it; -#endif - err = -ENODEV; - } - if (err) - goto out; -got_it: - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - iounmap(p->mapped); - release_region(dev->base_addr, NI52_TOTAL_SIZE); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops ni52_netdev_ops = { - .ndo_open = ni52_open, - .ndo_stop = ni52_close, - .ndo_get_stats = ni52_get_stats, - .ndo_tx_timeout = ni52_timeout, - .ndo_start_xmit = ni52_send_packet, - .ndo_set_rx_mode = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init ni52_probe1(struct net_device *dev, int ioaddr) -{ - int i, size, retval; - struct priv *priv = netdev_priv(dev); - - dev->base_addr = ioaddr; - dev->irq = irq; - dev->mem_start = memstart; - dev->mem_end = memend; - - spin_lock_init(&priv->spinlock); - - if (!request_region(ioaddr, NI52_TOTAL_SIZE, DRV_NAME)) - return -EBUSY; - - if (!(inb(ioaddr+NI52_MAGIC1) == NI52_MAGICVAL1) || - !(inb(ioaddr+NI52_MAGIC2) == NI52_MAGICVAL2)) { - retval = -ENODEV; - goto out; - } - - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(dev->base_addr+i); - - if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1 || - dev->dev_addr[2] != NI52_ADDR2) { - retval = -ENODEV; - goto out; - } - - printk(KERN_INFO "%s: NI5210 found at %#3lx, ", - dev->name, dev->base_addr); - - /* - * check (or search) IO-Memory, 8K and 16K - */ -#ifdef MODULE - size = dev->mem_end - dev->mem_start; - if (size != 0x2000 && size != 0x4000) { - printk("\n"); - printk(KERN_ERR "%s: Invalid memory size %d. Allowed is 0x2000 or 0x4000 bytes.\n", dev->name, size); - retval = -ENODEV; - goto out; - } - if (!check586(dev, size)) { - printk(KERN_ERR "?memcheck, Can't find memory at 0x%lx with size %d!\n", dev->mem_start, size); - retval = -ENODEV; - goto out; - } -#else - if (dev->mem_start != 0) { - /* no auto-mem-probe */ - size = 0x4000; /* check for 16K mem */ - if (!check586(dev, size)) { - size = 0x2000; /* check for 8K mem */ - if (!check586(dev, size)) { - printk(KERN_ERR "?memprobe, Can't find memory at 0x%lx!\n", dev->mem_start); - retval = -ENODEV; - goto out; - } - } - } else { - static const unsigned long memaddrs[] = { - 0xc8000, 0xca000, 0xcc000, 0xce000, 0xd0000, 0xd2000, - 0xd4000, 0xd6000, 0xd8000, 0xda000, 0xdc000, 0 - }; - for (i = 0;; i++) { - if (!memaddrs[i]) { - printk(KERN_ERR "?memprobe, Can't find io-memory!\n"); - retval = -ENODEV; - goto out; - } - dev->mem_start = memaddrs[i]; - size = 0x2000; /* check for 8K mem */ - if (check586(dev, size)) - /* 8K-check */ - break; - size = 0x4000; /* check for 16K mem */ - if (check586(dev, size)) - /* 16K-check */ - break; - } - } - /* set mem_end showed by 'ifconfig' */ - dev->mem_end = dev->mem_start + size; -#endif - - alloc586(dev); - - /* set number of receive-buffs according to memsize */ - if (size == 0x2000) - priv->num_recv_buffs = NUM_RECV_BUFFS_8; - else - priv->num_recv_buffs = NUM_RECV_BUFFS_16; - - printk(KERN_DEBUG "Memaddr: 0x%lx, Memsize: %d, ", - dev->mem_start, size); - - if (dev->irq < 2) { - unsigned long irq_mask; - - irq_mask = probe_irq_on(); - ni_reset586(); - ni_attn586(); - - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - if (!dev->irq) { - printk("?autoirq, Failed to detect IRQ line!\n"); - retval = -EAGAIN; - iounmap(priv->mapped); - goto out; - } - printk("IRQ %d (autodetected).\n", dev->irq); - } else { - if (dev->irq == 2) - dev->irq = 9; - printk("IRQ %d (assigned and not checked!).\n", dev->irq); - } - - dev->netdev_ops = &ni52_netdev_ops; - dev->watchdog_timeo = HZ/20; - - return 0; -out: - release_region(ioaddr, NI52_TOTAL_SIZE); - return retval; -} - -/********************************************** - * init the chip (ni52-interrupt should be disabled?!) - * needs a correct 'allocated' memory - */ - -static int init586(struct net_device *dev) -{ - void __iomem *ptr; - int i, result = 0; - struct priv *p = netdev_priv(dev); - struct configure_cmd_struct __iomem *cfg_cmd; - struct iasetup_cmd_struct __iomem *ias_cmd; - struct tdr_cmd_struct __iomem *tdr_cmd; - struct mcsetup_cmd_struct __iomem *mc_cmd; - struct netdev_hw_addr *ha; - int num_addrs = netdev_mc_count(dev); - - ptr = p->scb + 1; - - cfg_cmd = ptr; /* configure-command */ - writew(0, &cfg_cmd->cmd_status); - writew(CMD_CONFIGURE | CMD_LAST, &cfg_cmd->cmd_cmd); - writew(0xFFFF, &cfg_cmd->cmd_link); - - /* number of cfg bytes */ - writeb(0x0a, &cfg_cmd->byte_cnt); - /* fifo-limit (8=tx:32/rx:64) */ - writeb(fifo, &cfg_cmd->fifo); - /* hold or discard bad recv frames (bit 7) */ - writeb(0x40, &cfg_cmd->sav_bf); - /* addr_len |!src_insert |pre-len |loopback */ - writeb(0x2e, &cfg_cmd->adr_len); - writeb(0x00, &cfg_cmd->priority); - writeb(0x60, &cfg_cmd->ifs); - writeb(0x00, &cfg_cmd->time_low); - writeb(0xf2, &cfg_cmd->time_high); - writeb(0x00, &cfg_cmd->promisc); - if (dev->flags & IFF_ALLMULTI) { - int len = ((char __iomem *)p->iscp - (char __iomem *)ptr - 8) / 6; - if (num_addrs > len) { - printk(KERN_ERR "%s: switching to promisc. mode\n", - dev->name); - writeb(0x01, &cfg_cmd->promisc); - } - } - if (dev->flags & IFF_PROMISC) - writeb(0x01, &cfg_cmd->promisc); - writeb(0x00, &cfg_cmd->carr_coll); - writew(make16(cfg_cmd), &p->scb->cbl_offset); - writeb(0, &p->scb->cmd_ruc); - - writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */ - ni_attn586(); - - wait_for_stat_compl(cfg_cmd); - - if ((readw(&cfg_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) != - (STAT_COMPL|STAT_OK)) { - printk(KERN_ERR "%s: configure command failed: %x\n", - dev->name, readw(&cfg_cmd->cmd_status)); - return 1; - } - - /* - * individual address setup - */ - - ias_cmd = ptr; - - writew(0, &ias_cmd->cmd_status); - writew(CMD_IASETUP | CMD_LAST, &ias_cmd->cmd_cmd); - writew(0xffff, &ias_cmd->cmd_link); - - memcpy_toio(&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN); - - writew(make16(ias_cmd), &p->scb->cbl_offset); - - writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */ - ni_attn586(); - - wait_for_stat_compl(ias_cmd); - - if ((readw(&ias_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) != - (STAT_OK|STAT_COMPL)) { - printk(KERN_ERR "%s (ni52): individual address setup command failed: %04x\n", dev->name, readw(&ias_cmd->cmd_status)); - return 1; - } - - /* - * TDR, wire check .. e.g. no resistor e.t.c - */ - - tdr_cmd = ptr; - - writew(0, &tdr_cmd->cmd_status); - writew(CMD_TDR | CMD_LAST, &tdr_cmd->cmd_cmd); - writew(0xffff, &tdr_cmd->cmd_link); - writew(0, &tdr_cmd->status); - - writew(make16(tdr_cmd), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */ - ni_attn586(); - - wait_for_stat_compl(tdr_cmd); - - if (!(readw(&tdr_cmd->cmd_status) & STAT_COMPL)) - printk(KERN_ERR "%s: Problems while running the TDR.\n", - dev->name); - else { - udelay(16); - result = readw(&tdr_cmd->status); - writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc); - ni_attn586(); /* ack the interrupts */ - - if (result & TDR_LNK_OK) - ; - else if (result & TDR_XCVR_PRB) - printk(KERN_ERR "%s: TDR: Transceiver problem. Check the cable(s)!\n", - dev->name); - else if (result & TDR_ET_OPN) - printk(KERN_ERR "%s: TDR: No correct termination %d clocks away.\n", - dev->name, result & TDR_TIMEMASK); - else if (result & TDR_ET_SRT) { - /* time == 0 -> strange :-) */ - if (result & TDR_TIMEMASK) - printk(KERN_ERR "%s: TDR: Detected a short circuit %d clocks away.\n", - dev->name, result & TDR_TIMEMASK); - } else - printk(KERN_ERR "%s: TDR: Unknown status %04x\n", - dev->name, result); - } - - /* - * Multicast setup - */ - if (num_addrs && !(dev->flags & IFF_PROMISC)) { - mc_cmd = ptr; - writew(0, &mc_cmd->cmd_status); - writew(CMD_MCSETUP | CMD_LAST, &mc_cmd->cmd_cmd); - writew(0xffff, &mc_cmd->cmd_link); - writew(num_addrs * 6, &mc_cmd->mc_cnt); - - i = 0; - netdev_for_each_mc_addr(ha, dev) - memcpy_toio(mc_cmd->mc_list[i++], ha->addr, 6); - - writew(make16(mc_cmd), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - ni_attn586(); - - wait_for_stat_compl(mc_cmd); - - if ((readw(&mc_cmd->cmd_status) & (STAT_COMPL|STAT_OK)) - != (STAT_COMPL|STAT_OK)) - printk(KERN_ERR "%s: Can't apply multicast-address-list.\n", dev->name); - } - - /* - * alloc nop/xmit-cmds - */ -#if (NUM_XMIT_BUFFS == 1) - for (i = 0; i < 2; i++) { - p->nop_cmds[i] = ptr; - writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd); - writew(0, &p->nop_cmds[i]->cmd_status); - writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link); - ptr = ptr + sizeof(struct nop_cmd_struct); - } -#else - for (i = 0; i < NUM_XMIT_BUFFS; i++) { - p->nop_cmds[i] = ptr; - writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd); - writew(0, &p->nop_cmds[i]->cmd_status); - writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link); - ptr = ptr + sizeof(struct nop_cmd_struct); - } -#endif - - ptr = alloc_rfa(dev, ptr); /* init receive-frame-area */ - - /* - * alloc xmit-buffs / init xmit_cmds - */ - for (i = 0; i < NUM_XMIT_BUFFS; i++) { - /* Transmit cmd/buff 0 */ - p->xmit_cmds[i] = ptr; - ptr = ptr + sizeof(struct transmit_cmd_struct); - p->xmit_cbuffs[i] = ptr; /* char-buffs */ - ptr = ptr + XMIT_BUFF_SIZE; - p->xmit_buffs[i] = ptr; /* TBD */ - ptr = ptr + sizeof(struct tbd_struct); - if ((void __iomem *)ptr > (void __iomem *)p->iscp) { - printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", - dev->name); - return 1; - } - memset_io(p->xmit_cmds[i], 0, - sizeof(struct transmit_cmd_struct)); - memset_io(p->xmit_buffs[i], 0, - sizeof(struct tbd_struct)); - writew(make16(p->nop_cmds[(i+1)%NUM_XMIT_BUFFS]), - &p->xmit_cmds[i]->cmd_link); - writew(STAT_COMPL, &p->xmit_cmds[i]->cmd_status); - writew(CMD_XMIT|CMD_INT, &p->xmit_cmds[i]->cmd_cmd); - writew(make16(p->xmit_buffs[i]), &p->xmit_cmds[i]->tbd_offset); - writew(0xffff, &p->xmit_buffs[i]->next); - writel(make24(p->xmit_cbuffs[i]), &p->xmit_buffs[i]->buffer); - } - - p->xmit_count = 0; - p->xmit_last = 0; -#ifndef NO_NOPCOMMANDS - p->nop_point = 0; -#endif - - /* - * 'start transmitter' - */ -#ifndef NO_NOPCOMMANDS - writew(make16(p->nop_cmds[0]), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - ni_attn586(); - wait_for_scb_cmd(dev); -#else - writew(make16(p->xmit_cmds[0]), &p->xmit_cmds[0]->cmd_link); - writew(CMD_XMIT | CMD_SUSPEND | CMD_INT, &p->xmit_cmds[0]->cmd_cmd); -#endif - - /* - * ack. interrupts - */ - writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc); - ni_attn586(); - udelay(16); - - ni_enaint(); - - return 0; -} - -/****************************************************** - * This is a helper routine for ni52_rnr_int() and init586(). - * It sets up the Receive Frame Area (RFA). - */ - -static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr) -{ - struct rfd_struct __iomem *rfd = ptr; - struct rbd_struct __iomem *rbd; - int i; - struct priv *p = netdev_priv(dev); - - memset_io(rfd, 0, - sizeof(struct rfd_struct) * (p->num_recv_buffs + rfdadd)); - p->rfd_first = rfd; - - for (i = 0; i < (p->num_recv_buffs + rfdadd); i++) { - writew(make16(rfd + (i+1) % (p->num_recv_buffs+rfdadd)), - &rfd[i].next); - writew(0xffff, &rfd[i].rbd_offset); - } - /* RU suspend */ - writeb(RFD_SUSP, &rfd[p->num_recv_buffs-1+rfdadd].last); - - ptr = rfd + (p->num_recv_buffs + rfdadd); - - rbd = ptr; - ptr = rbd + p->num_recv_buffs; - - /* clr descriptors */ - memset_io(rbd, 0, sizeof(struct rbd_struct) * (p->num_recv_buffs)); - - for (i = 0; i < p->num_recv_buffs; i++) { - writew(make16(rbd + (i+1) % p->num_recv_buffs), &rbd[i].next); - writew(RECV_BUFF_SIZE, &rbd[i].size); - writel(make24(ptr), &rbd[i].buffer); - ptr = ptr + RECV_BUFF_SIZE; - } - p->rfd_top = p->rfd_first; - p->rfd_last = p->rfd_first + (p->num_recv_buffs - 1 + rfdadd); - - writew(make16(p->rfd_first), &p->scb->rfa_offset); - writew(make16(rbd), &p->rfd_first->rbd_offset); - - return ptr; -} - - -/************************************************** - * Interrupt Handler ... - */ - -static irqreturn_t ni52_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - unsigned int stat; - int cnt = 0; - struct priv *p; - - p = netdev_priv(dev); - - if (debuglevel > 1) - printk("I"); - - spin_lock(&p->spinlock); - - wait_for_scb_cmd(dev); /* wait for last command */ - - while ((stat = readb(&p->scb->cus) & STAT_MASK)) { - writeb(stat, &p->scb->cmd_cuc); - ni_attn586(); - - if (stat & STAT_FR) /* received a frame */ - ni52_rcv_int(dev); - - if (stat & STAT_RNR) { /* RU went 'not ready' */ - printk("(R)"); - if (readb(&p->scb->rus) & RU_SUSPEND) { - /* special case: RU_SUSPEND */ - wait_for_scb_cmd(dev); - writeb(RUC_RESUME, &p->scb->cmd_ruc); - ni_attn586(); - wait_for_scb_cmd_ruc(dev); - } else { - printk(KERN_ERR "%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n", - dev->name, stat, readb(&p->scb->rus)); - ni52_rnr_int(dev); - } - } - - /* Command with I-bit set complete */ - if (stat & STAT_CX) - ni52_xmt_int(dev); - -#ifndef NO_NOPCOMMANDS - if (stat & STAT_CNA) { /* CU went 'not ready' */ - if (netif_running(dev)) - printk(KERN_ERR "%s: oops! CU has left active state. stat: %04x/%02x.\n", - dev->name, stat, readb(&p->scb->cus)); - } -#endif - - if (debuglevel > 1) - printk("%d", cnt++); - - /* Wait for ack. (ni52_xmt_int can be faster than ack!!) */ - wait_for_scb_cmd(dev); - if (readb(&p->scb->cmd_cuc)) { /* timed out? */ - printk(KERN_ERR "%s: Acknowledge timed out.\n", - dev->name); - ni_disint(); - break; - } - } - spin_unlock(&p->spinlock); - - if (debuglevel > 1) - printk("i"); - return IRQ_HANDLED; -} - -/******************************************************* - * receive-interrupt - */ - -static void ni52_rcv_int(struct net_device *dev) -{ - int status, cnt = 0; - unsigned short totlen; - struct sk_buff *skb; - struct rbd_struct __iomem *rbd; - struct priv *p = netdev_priv(dev); - - if (debuglevel > 0) - printk("R"); - - for (; (status = readb(&p->rfd_top->stat_high)) & RFD_COMPL;) { - rbd = make32(readw(&p->rfd_top->rbd_offset)); - if (status & RFD_OK) { /* frame received without error? */ - totlen = readw(&rbd->status); - if (totlen & RBD_LAST) { - /* the first and the last buffer? */ - totlen &= RBD_MASK; /* length of this frame */ - writew(0x00, &rbd->status); - skb = netdev_alloc_skb(dev, totlen + 2); - if (skb != NULL) { - skb_reserve(skb, 2); - skb_put(skb, totlen); - memcpy_fromio(skb->data, p->base + readl(&rbd->buffer), totlen); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += totlen; - } else - dev->stats.rx_dropped++; - } else { - int rstat; - /* free all RBD's until RBD_LAST is set */ - totlen = 0; - while (!((rstat = readw(&rbd->status)) & RBD_LAST)) { - totlen += rstat & RBD_MASK; - if (!rstat) { - printk(KERN_ERR "%s: Whoops .. no end mark in RBD list\n", dev->name); - break; - } - writew(0, &rbd->status); - rbd = make32(readw(&rbd->next)); - } - totlen += rstat & RBD_MASK; - writew(0, &rbd->status); - printk(KERN_ERR "%s: received oversized frame! length: %d\n", - dev->name, totlen); - dev->stats.rx_dropped++; - } - } else {/* frame !(ok), only with 'save-bad-frames' */ - printk(KERN_ERR "%s: oops! rfd-error-status: %04x\n", - dev->name, status); - dev->stats.rx_errors++; - } - writeb(0, &p->rfd_top->stat_high); - writeb(RFD_SUSP, &p->rfd_top->last); /* maybe exchange by RFD_LAST */ - writew(0xffff, &p->rfd_top->rbd_offset); - writeb(0, &p->rfd_last->last); /* delete RFD_SUSP */ - p->rfd_last = p->rfd_top; - p->rfd_top = make32(readw(&p->rfd_top->next)); /* step to next RFD */ - writew(make16(p->rfd_top), &p->scb->rfa_offset); - - if (debuglevel > 0) - printk("%d", cnt++); - } - - if (automatic_resume) { - wait_for_scb_cmd(dev); - writeb(RUC_RESUME, &p->scb->cmd_ruc); - ni_attn586(); - wait_for_scb_cmd_ruc(dev); - } - -#ifdef WAIT_4_BUSY - { - int i; - for (i = 0; i < 1024; i++) { - if (p->rfd_top->status) - break; - udelay(16); - if (i == 1023) - printk(KERN_ERR "%s: RU hasn't fetched next RFD (not busy/complete)\n", dev->name); - } - } -#endif - if (debuglevel > 0) - printk("r"); -} - -/********************************************************** - * handle 'Receiver went not ready'. - */ - -static void ni52_rnr_int(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - - dev->stats.rx_errors++; - - wait_for_scb_cmd(dev); /* wait for the last cmd, WAIT_4_FULLSTAT?? */ - writeb(RUC_ABORT, &p->scb->cmd_ruc); /* usually the RU is in the 'no resource'-state .. abort it now. */ - ni_attn586(); - wait_for_scb_cmd_ruc(dev); /* wait for accept cmd. */ - - alloc_rfa(dev, p->rfd_first); - /* maybe add a check here, before restarting the RU */ - startrecv586(dev); /* restart RU */ - - printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n", - dev->name, readb(&p->scb->rus)); - -} - -/********************************************************** - * handle xmit - interrupt - */ - -static void ni52_xmt_int(struct net_device *dev) -{ - int status; - struct priv *p = netdev_priv(dev); - - if (debuglevel > 0) - printk("X"); - - status = readw(&p->xmit_cmds[p->xmit_last]->cmd_status); - if (!(status & STAT_COMPL)) - printk(KERN_ERR "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); - - if (status & STAT_OK) { - dev->stats.tx_packets++; - dev->stats.collisions += (status & TCMD_MAXCOLLMASK); - } else { - dev->stats.tx_errors++; - if (status & TCMD_LATECOLL) { - printk(KERN_ERR "%s: late collision detected.\n", - dev->name); - dev->stats.collisions++; - } else if (status & TCMD_NOCARRIER) { - dev->stats.tx_carrier_errors++; - printk(KERN_ERR "%s: no carrier detected.\n", - dev->name); - } else if (status & TCMD_LOSTCTS) - printk(KERN_ERR "%s: loss of CTS detected.\n", - dev->name); - else if (status & TCMD_UNDERRUN) { - dev->stats.tx_fifo_errors++; - printk(KERN_ERR "%s: DMA underrun detected.\n", - dev->name); - } else if (status & TCMD_MAXCOLL) { - printk(KERN_ERR "%s: Max. collisions exceeded.\n", - dev->name); - dev->stats.collisions += 16; - } - } -#if (NUM_XMIT_BUFFS > 1) - if ((++p->xmit_last) == NUM_XMIT_BUFFS) - p->xmit_last = 0; -#endif - netif_wake_queue(dev); -} - -/*********************************************************** - * (re)start the receiver - */ - -static void startrecv586(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - - wait_for_scb_cmd(dev); - wait_for_scb_cmd_ruc(dev); - writew(make16(p->rfd_first), &p->scb->rfa_offset); - writeb(RUC_START, &p->scb->cmd_ruc); - ni_attn586(); /* start cmd. */ - wait_for_scb_cmd_ruc(dev); - /* wait for accept cmd. (no timeout!!) */ -} - -static void ni52_timeout(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); -#ifndef NO_NOPCOMMANDS - if (readb(&p->scb->cus) & CU_ACTIVE) { /* COMMAND-UNIT active? */ - netif_wake_queue(dev); -#ifdef DEBUG - printk(KERN_ERR "%s: strange ... timeout with CU active?!?\n", - dev->name); - printk(KERN_ERR "%s: X0: %04x N0: %04x N1: %04x %d\n", - dev->name, (int)p->xmit_cmds[0]->cmd_status, - readw(&p->nop_cmds[0]->cmd_status), - readw(&p->nop_cmds[1]->cmd_status), - p->nop_point); -#endif - writeb(CUC_ABORT, &p->scb->cmd_cuc); - ni_attn586(); - wait_for_scb_cmd(dev); - writew(make16(p->nop_cmds[p->nop_point]), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - ni_attn586(); - wait_for_scb_cmd(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - return 0; - } -#endif - { -#ifdef DEBUG - printk(KERN_ERR "%s: xmitter timed out, try to restart! stat: %02x\n", - dev->name, readb(&p->scb->cus)); - printk(KERN_ERR "%s: command-stats: %04x %04x\n", - dev->name, - readw(&p->xmit_cmds[0]->cmd_status), - readw(&p->xmit_cmds[1]->cmd_status)); - printk(KERN_ERR "%s: check, whether you set the right interrupt number!\n", - dev->name); -#endif - ni52_close(dev); - ni52_open(dev); - } - dev->trans_start = jiffies; /* prevent tx timeout */ -} - -/****************************************************** - * send frame - */ - -static netdev_tx_t ni52_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - int len, i; -#ifndef NO_NOPCOMMANDS - int next_nop; -#endif - struct priv *p = netdev_priv(dev); - - if (skb->len > XMIT_BUFF_SIZE) { - printk(KERN_ERR "%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n", dev->name, XMIT_BUFF_SIZE, skb->len); - return NETDEV_TX_OK; - } - - netif_stop_queue(dev); - - memcpy_toio(p->xmit_cbuffs[p->xmit_count], skb->data, skb->len); - len = skb->len; - if (len < ETH_ZLEN) { - len = ETH_ZLEN; - memset_io(p->xmit_cbuffs[p->xmit_count]+skb->len, 0, - len - skb->len); - } - -#if (NUM_XMIT_BUFFS == 1) -# ifdef NO_NOPCOMMANDS - -#ifdef DEBUG - if (readb(&p->scb->cus) & CU_ACTIVE) { - printk(KERN_ERR "%s: Hmmm .. CU is still running and we wanna send a new packet.\n", dev->name); - printk(KERN_ERR "%s: stat: %04x %04x\n", - dev->name, readb(&p->scb->cus), - readw(&p->xmit_cmds[0]->cmd_status)); - } -#endif - writew(TBD_LAST | len, &p->xmit_buffs[0]->size); - for (i = 0; i < 16; i++) { - writew(0, &p->xmit_cmds[0]->cmd_status); - wait_for_scb_cmd(dev); - if ((readb(&p->scb->cus) & CU_STATUS) == CU_SUSPEND) - writeb(CUC_RESUME, &p->scb->cmd_cuc); - else { - writew(make16(p->xmit_cmds[0]), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - } - ni_attn586(); - if (!i) - dev_kfree_skb(skb); - wait_for_scb_cmd(dev); - /* test it, because CU sometimes doesn't start immediately */ - if (readb(&p->scb->cus) & CU_ACTIVE) - break; - if (readw(&p->xmit_cmds[0]->cmd_status)) - break; - if (i == 15) - printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name); - } -# else - next_nop = (p->nop_point + 1) & 0x1; - writew(TBD_LAST | len, &p->xmit_buffs[0]->size); - writew(make16(p->nop_cmds[next_nop]), &p->xmit_cmds[0]->cmd_link); - writew(make16(p->nop_cmds[next_nop]), - &p->nop_cmds[next_nop]->cmd_link); - writew(0, &p->xmit_cmds[0]->cmd_status); - writew(0, &p->nop_cmds[next_nop]->cmd_status); - - writew(make16(p->xmit_cmds[0]), &p->nop_cmds[p->nop_point]->cmd_link); - p->nop_point = next_nop; - dev_kfree_skb(skb); -# endif -#else - writew(TBD_LAST | len, &p->xmit_buffs[p->xmit_count]->size); - next_nop = p->xmit_count + 1 - if (next_nop == NUM_XMIT_BUFFS) - next_nop = 0; - writew(0, &p->xmit_cmds[p->xmit_count]->cmd_status); - /* linkpointer of xmit-command already points to next nop cmd */ - writew(make16(p->nop_cmds[next_nop]), - &p->nop_cmds[next_nop]->cmd_link); - writew(0, &p->nop_cmds[next_nop]->cmd_status); - writew(make16(p->xmit_cmds[p->xmit_count]), - &p->nop_cmds[p->xmit_count]->cmd_link); - p->xmit_count = next_nop; - { - unsigned long flags; - spin_lock_irqsave(&p->spinlock); - if (p->xmit_count != p->xmit_last) - netif_wake_queue(dev); - spin_unlock_irqrestore(&p->spinlock); - } - dev_kfree_skb(skb); -#endif - return NETDEV_TX_OK; -} - -/******************************************* - * Someone wanna have the statistics - */ - -static struct net_device_stats *ni52_get_stats(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - unsigned short crc, aln, rsc, ovrn; - - /* Get error-statistics from the ni82586 */ - crc = readw(&p->scb->crc_errs); - writew(0, &p->scb->crc_errs); - aln = readw(&p->scb->aln_errs); - writew(0, &p->scb->aln_errs); - rsc = readw(&p->scb->rsc_errs); - writew(0, &p->scb->rsc_errs); - ovrn = readw(&p->scb->ovrn_errs); - writew(0, &p->scb->ovrn_errs); - - dev->stats.rx_crc_errors += crc; - dev->stats.rx_fifo_errors += ovrn; - dev->stats.rx_frame_errors += aln; - dev->stats.rx_dropped += rsc; - - return &dev->stats; -} - -/******************************************************** - * Set MC list .. - */ - -static void set_multicast_list(struct net_device *dev) -{ - netif_stop_queue(dev); - ni_disint(); - alloc586(dev); - init586(dev); - startrecv586(dev); - ni_enaint(); - netif_wake_queue(dev); -} - -#ifdef MODULE -static struct net_device *dev_ni52; - -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(memstart, long, 0); -module_param(memend, long, 0); -MODULE_PARM_DESC(io, "NI5210 I/O base address,required"); -MODULE_PARM_DESC(irq, "NI5210 IRQ number,required"); -MODULE_PARM_DESC(memstart, "NI5210 memory base address,required"); -MODULE_PARM_DESC(memend, "NI5210 memory end address,required"); - -int __init init_module(void) -{ - if (io <= 0x0 || !memend || !memstart || irq < 2) { - printk(KERN_ERR "ni52: Autoprobing not allowed for modules.\n"); - printk(KERN_ERR "ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n"); - return -ENODEV; - } - dev_ni52 = ni52_probe(-1); - if (IS_ERR(dev_ni52)) - return PTR_ERR(dev_ni52); - return 0; -} - -void __exit cleanup_module(void) -{ - struct priv *p = netdev_priv(dev_ni52); - unregister_netdev(dev_ni52); - iounmap(p->mapped); - release_region(dev_ni52->base_addr, NI52_TOTAL_SIZE); - free_netdev(dev_ni52); -} -#endif /* MODULE */ - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/i825xx/ni52.h b/drivers/net/ethernet/i825xx/ni52.h deleted file mode 100644 index 0a03b28..0000000 --- a/drivers/net/ethernet/i825xx/ni52.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Intel i82586 Ethernet definitions - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de) - * - * I have done a look in the following sources: - * crynwr-packet-driver by Russ Nelson - * Garret A. Wollman's i82586-driver for BSD - */ - - -#define NI52_RESET 0 /* writing to this address, resets the i82586 */ -#define NI52_ATTENTION 1 /* channel attention, kick the 586 */ -#define NI52_TENA 3 /* 2-5 possibly wrong, Xmit enable */ -#define NI52_TDIS 2 /* Xmit disable */ -#define NI52_INTENA 5 /* Interrupt enable */ -#define NI52_INTDIS 4 /* Interrupt disable */ -#define NI52_MAGIC1 6 /* dunno exact function */ -#define NI52_MAGIC2 7 /* dunno exact function */ - -#define NI52_MAGICVAL1 0x00 /* magic-values for ni5210 card */ -#define NI52_MAGICVAL2 0x55 - -/* - * where to find the System Configuration Pointer (SCP) - */ -#define SCP_DEFAULT_ADDRESS 0xfffff4 - - -/* - * System Configuration Pointer Struct - */ - -struct scp_struct -{ - u16 zero_dum0; /* has to be zero */ - u8 sysbus; /* 0=16Bit,1=8Bit */ - u8 zero_dum1; /* has to be zero for 586 */ - u16 zero_dum2; - u16 zero_dum3; - u32 iscp; /* pointer to the iscp-block */ -}; - - -/* - * Intermediate System Configuration Pointer (ISCP) - */ -struct iscp_struct -{ - u8 busy; /* 586 clears after successful init */ - u8 zero_dummy; /* has to be zero */ - u16 scb_offset; /* pointeroffset to the scb_base */ - u32 scb_base; /* base-address of all 16-bit offsets */ -}; - -/* - * System Control Block (SCB) - */ -struct scb_struct -{ - u8 rus; - u8 cus; - u8 cmd_ruc; /* command word: RU part */ - u8 cmd_cuc; /* command word: CU part & ACK */ - u16 cbl_offset; /* pointeroffset, command block list */ - u16 rfa_offset; /* pointeroffset, receive frame area */ - u16 crc_errs; /* CRC-Error counter */ - u16 aln_errs; /* alignmenterror counter */ - u16 rsc_errs; /* Resourceerror counter */ - u16 ovrn_errs; /* OVerrunerror counter */ -}; - -/* - * possible command values for the command word - */ -#define RUC_MASK 0x0070 /* mask for RU commands */ -#define RUC_NOP 0x0000 /* NOP-command */ -#define RUC_START 0x0010 /* start RU */ -#define RUC_RESUME 0x0020 /* resume RU after suspend */ -#define RUC_SUSPEND 0x0030 /* suspend RU */ -#define RUC_ABORT 0x0040 /* abort receiver operation immediately */ - -#define CUC_MASK 0x07 /* mask for CU command */ -#define CUC_NOP 0x00 /* NOP-command */ -#define CUC_START 0x01 /* start execution of 1. cmd on the CBL */ -#define CUC_RESUME 0x02 /* resume after suspend */ -#define CUC_SUSPEND 0x03 /* Suspend CU */ -#define CUC_ABORT 0x04 /* abort command operation immediately */ - -#define ACK_MASK 0xf0 /* mask for ACK command */ -#define ACK_CX 0x80 /* acknowledges STAT_CX */ -#define ACK_FR 0x40 /* ack. STAT_FR */ -#define ACK_CNA 0x20 /* ack. STAT_CNA */ -#define ACK_RNR 0x10 /* ack. STAT_RNR */ - -/* - * possible status values for the status word - */ -#define STAT_MASK 0xf0 /* mask for cause of interrupt */ -#define STAT_CX 0x80 /* CU finished cmd with its I bit set */ -#define STAT_FR 0x40 /* RU finished receiving a frame */ -#define STAT_CNA 0x20 /* CU left active state */ -#define STAT_RNR 0x10 /* RU left ready state */ - -#define CU_STATUS 0x7 /* CU status, 0=idle */ -#define CU_SUSPEND 0x1 /* CU is suspended */ -#define CU_ACTIVE 0x2 /* CU is active */ - -#define RU_STATUS 0x70 /* RU status, 0=idle */ -#define RU_SUSPEND 0x10 /* RU suspended */ -#define RU_NOSPACE 0x20 /* RU no resources */ -#define RU_READY 0x40 /* RU is ready */ - -/* - * Receive Frame Descriptor (RFD) - */ -struct rfd_struct -{ - u8 stat_low; /* status word */ - u8 stat_high; /* status word */ - u8 rfd_sf; /* 82596 mode only */ - u8 last; /* Bit15,Last Frame on List / Bit14,suspend */ - u16 next; /* linkoffset to next RFD */ - u16 rbd_offset; /* pointeroffset to RBD-buffer */ - u8 dest[6]; /* ethernet-address, destination */ - u8 source[6]; /* ethernet-address, source */ - u16 length; /* 802.3 frame-length */ - u16 zero_dummy; /* dummy */ -}; - -#define RFD_LAST 0x80 /* last: last rfd in the list */ -#define RFD_SUSP 0x40 /* last: suspend RU after */ -#define RFD_COMPL 0x80 -#define RFD_OK 0x20 -#define RFD_BUSY 0x40 -#define RFD_ERR_LEN 0x10 /* Length error (if enabled length-checking */ -#define RFD_ERR_CRC 0x08 /* CRC error */ -#define RFD_ERR_ALGN 0x04 /* Alignment error */ -#define RFD_ERR_RNR 0x02 /* status: receiver out of resources */ -#define RFD_ERR_OVR 0x01 /* DMA Overrun! */ - -#define RFD_ERR_FTS 0x0080 /* Frame to short */ -#define RFD_ERR_NEOP 0x0040 /* No EOP flag (for bitstuffing only) */ -#define RFD_ERR_TRUN 0x0020 /* (82596 only/SF mode) indicates truncated frame */ -#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA (only 82596) */ -#define RFD_COLLDET 0x0001 /* Detected collision during reception */ - -/* - * Receive Buffer Descriptor (RBD) - */ -struct rbd_struct -{ - u16 status; /* status word,number of used bytes in buff */ - u16 next; /* pointeroffset to next RBD */ - u32 buffer; /* receive buffer address pointer */ - u16 size; /* size of this buffer */ - u16 zero_dummy; /* dummy */ -}; - -#define RBD_LAST 0x8000 /* last buffer */ -#define RBD_USED 0x4000 /* this buffer has data */ -#define RBD_MASK 0x3fff /* size-mask for length */ - -/* - * Statusvalues for Commands/RFD - */ -#define STAT_COMPL 0x8000 /* status: frame/command is complete */ -#define STAT_BUSY 0x4000 /* status: frame/command is busy */ -#define STAT_OK 0x2000 /* status: frame/command is ok */ - -/* - * Action-Commands - */ -#define CMD_NOP 0x0000 /* NOP */ -#define CMD_IASETUP 0x0001 /* initial address setup command */ -#define CMD_CONFIGURE 0x0002 /* configure command */ -#define CMD_MCSETUP 0x0003 /* MC setup command */ -#define CMD_XMIT 0x0004 /* transmit command */ -#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */ -#define CMD_DUMP 0x0006 /* dump command */ -#define CMD_DIAGNOSE 0x0007 /* diagnose command */ - -/* - * Action command bits - */ -#define CMD_LAST 0x8000 /* indicates last command in the CBL */ -#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */ -#define CMD_INT 0x2000 /* generate interrupt after execution */ - -/* - * NOP - command - */ -struct nop_cmd_struct -{ - u16 cmd_status; /* status of this command */ - u16 cmd_cmd; /* the command itself (+bits) */ - u16 cmd_link; /* offsetpointer to next command */ -}; - -/* - * IA Setup command - */ -struct iasetup_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u8 iaddr[6]; -}; - -/* - * Configure command - */ -struct configure_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u8 byte_cnt; /* size of the config-cmd */ - u8 fifo; /* fifo/recv monitor */ - u8 sav_bf; /* save bad frames (bit7=1)*/ - u8 adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/ - u8 priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */ - u8 ifs; /* inter frame spacing */ - u8 time_low; /* slot time low */ - u8 time_high; /* slot time high(0-2) and max. retries(4-7) */ - u8 promisc; /* promisc-mode(0) , et al (1-7) */ - u8 carr_coll; /* carrier(0-3)/collision(4-7) stuff */ - u8 fram_len; /* minimal frame len */ - u8 dummy; /* dummy */ -}; - -/* - * Multicast Setup command - */ -struct mcsetup_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 mc_cnt; /* number of bytes in the MC-List */ - u8 mc_list[0][6]; /* pointer to 6 bytes entries */ -}; - -/* - * DUMP command - */ -struct dump_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 dump_offset; /* pointeroffset to DUMP space */ -}; - -/* - * transmit command - */ -struct transmit_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 tbd_offset; /* pointeroffset to TBD */ - u8 dest[6]; /* destination address of the frame */ - u16 length; /* user defined: 802.3 length / Ether type */ -}; - -#define TCMD_ERRMASK 0x0fa0 -#define TCMD_MAXCOLLMASK 0x000f -#define TCMD_MAXCOLL 0x0020 -#define TCMD_HEARTBEAT 0x0040 -#define TCMD_DEFERRED 0x0080 -#define TCMD_UNDERRUN 0x0100 -#define TCMD_LOSTCTS 0x0200 -#define TCMD_NOCARRIER 0x0400 -#define TCMD_LATECOLL 0x0800 - -struct tdr_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 status; -}; - -#define TDR_LNK_OK 0x8000 /* No link problem identified */ -#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */ -#define TDR_ET_OPN 0x2000 /* open, no correct termination */ -#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */ -#define TDR_TIMEMASK 0x07ff /* mask for the time field */ - -/* - * Transmit Buffer Descriptor (TBD) - */ -struct tbd_struct -{ - u16 size; /* size + EOF-Flag(15) */ - u16 next; /* pointeroffset to next TBD */ - u32 buffer; /* pointer to buffer */ -}; - -#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */ - - - - -- cgit v0.10.2 From d2477de7a63a332a8fe75008fa87e05290c5caac Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 10 Jan 2013 18:25:04 -0500 Subject: drivers/net: delete old 8 bit ISA Racal ni5010 support. These cards were only available in 8bit format, and in addition they only had AUI and BNC(10-Base2) interfaces (i.e. no RJ-45). In fact, they are so rare, that an internet search on these old cards almost comes up empty, unless the "Micom interlan" name is used. This puts them in the equivalent domain as the 3c501, so there should be no strong opposition to the driver removal, as nobody is seriously using 3.9+ with 8 bit ISA hardware. In doing so, the whole "ethernet/racal" category becomes empty, so we clean up the Makefile/Kconfig and subdir appropriately. Cc: Andreas Mohr Cc: Jan-Pascal van Best Signed-off-by: Paul Gortmaker diff --git a/MAINTAINERS b/MAINTAINERS index cd5b31f..88866e6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5370,13 +5370,6 @@ F: include/linux/sunrpc/ F: include/uapi/linux/nfs* F: include/uapi/linux/sunrpc/ -NI5010 NETWORK DRIVER -M: Jan-Pascal van Best -M: Andreas Mohr -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/ethernet/racal/ni5010.* - NILFS2 FILESYSTEM M: KONISHI Ryusuke L: linux-nilfs@vger.kernel.org diff --git a/drivers/net/Space.c b/drivers/net/Space.c index b69dac1..4141c64 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -50,7 +50,6 @@ extern struct net_device *eth16i_probe(int unit); extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); extern struct net_device *e2100_probe(int unit); -extern struct net_device *ni5010_probe(int unit); extern struct net_device *ni65_probe(int unit); extern struct net_device *sonic_probe(int unit); extern struct net_device *seeq8005_probe(int unit); @@ -153,9 +152,6 @@ static struct devprobe2 isa_probes[] __initdata = { #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ {i82596_probe, 0}, #endif -#ifdef CONFIG_NI5010 - {ni5010_probe, 0}, -#endif #ifdef CONFIG_NI65 {ni65_probe, 0}, #endif diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index e4ff389..ed956e0 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -135,7 +135,6 @@ config ETHOC source "drivers/net/ethernet/packetengines/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" -source "drivers/net/ethernet/racal/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index d447307..8268d85 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_ETHOC) += ethoc.o obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ -obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ diff --git a/drivers/net/ethernet/racal/Kconfig b/drivers/net/ethernet/racal/Kconfig deleted file mode 100644 index 01969e0..0000000 --- a/drivers/net/ethernet/racal/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -# -# Racal-Interlan device configuration -# - -config NET_VENDOR_RACAL - bool "Racal-Interlan (Micom) NI devices" - default y - depends on ISA - ---help--- - If you have a network (Ethernet) card belonging to this class, such - as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO, - available from . - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about NI cards. If you say Y, you will be asked for - your specific card in the following questions. - -if NET_VENDOR_RACAL - -config NI5010 - tristate "NI5010 support (EXPERIMENTAL)" - depends on ISA && EXPERIMENTAL && BROKEN_ON_SMP - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . Note that this is still - experimental code. - - To compile this driver as a module, choose M here. The module - will be called ni5010. - -endif # NET_VENDOR_RACAL diff --git a/drivers/net/ethernet/racal/Makefile b/drivers/net/ethernet/racal/Makefile deleted file mode 100644 index 1e210ca..0000000 --- a/drivers/net/ethernet/racal/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Racal-Interlan network device drivers. -# - -obj-$(CONFIG_NI5010) += ni5010.o diff --git a/drivers/net/ethernet/racal/ni5010.c b/drivers/net/ethernet/racal/ni5010.c deleted file mode 100644 index 8079822..0000000 --- a/drivers/net/ethernet/racal/ni5010.c +++ /dev/null @@ -1,771 +0,0 @@ -/* ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard. - * - * Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * The authors may be reached as: - * janpascal@vanbest.org andi@lisas.de - * - * Sources: - * Donald Becker's "skeleton.c" - * Crynwr ni5010 packet driver - * - * Changes: - * v0.0: First test version - * v0.1: First working version - * v0.2: - * v0.3->v0.90: Now demand setting io and irq when loading as module - * 970430 v0.91: modified for Linux 2.1.14 - * v0.92: Implemented Andreas' (better) NI5010 probe - * 970503 v0.93: Fixed auto-irq failure on warm reboot (JB) - * 970623 v1.00: First kernel version (AM) - * 970814 v1.01: Added detection of onboard receive buffer size (AM) - * 060611 v1.02: slight cleanup: email addresses, driver modernization. - * Bugs: - * - not SMP-safe (no locking of I/O accesses) - * - Note that you have to patch ifconfig for the new /proc/net/dev - * format. It gives incorrect stats otherwise. - * - * To do: - * Fix all bugs :-) - * Move some stuff to chipset_init() - * Handle xmt errors other than collisions - * Complete merge with Andreas' driver - * Implement ring buffers (Is this useful? You can't squeeze - * too many packet in a 2k buffer!) - * Implement DMA (Again, is this useful? Some docs say DMA is - * slower than programmed I/O) - * - * Compile with: - * gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ \ - * -DMODULE -c ni5010.c - * - * Insert with e.g.: - * insmod ni5010.ko io=0x300 irq=5 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "ni5010.h" - -static const char boardname[] = "NI5010"; -static char version[] __initdata = - "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n"; - -/* bufsize_rcv == 0 means autoprobing */ -static unsigned int bufsize_rcv; - -#define JUMPERED_INTERRUPTS /* IRQ line jumpered on board */ -#undef JUMPERED_DMA /* No DMA used */ -#undef FULL_IODETECT /* Only detect in portlist */ - -#ifndef FULL_IODETECT -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int ports[] __initdata = - { 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0 }; -#endif - -/* Use 0 for production, 1 for verification, >2 for debug */ -#ifndef NI5010_DEBUG -#define NI5010_DEBUG 0 -#endif - -/* Information that needs to be kept for each board. */ -struct ni5010_local { - int o_pkt_size; - spinlock_t lock; -}; - -/* Index to functions, as function prototypes. */ - -static int ni5010_probe1(struct net_device *dev, int ioaddr); -static int ni5010_open(struct net_device *dev); -static int ni5010_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t ni5010_interrupt(int irq, void *dev_id); -static void ni5010_rx(struct net_device *dev); -static void ni5010_timeout(struct net_device *dev); -static int ni5010_close(struct net_device *dev); -static void ni5010_set_multicast_list(struct net_device *dev); -static void reset_receiver(struct net_device *dev); - -static int process_xmt_interrupt(struct net_device *dev); -#define tx_done(dev) 1 -static void hardware_send_packet(struct net_device *dev, char *buf, int length, int pad); -static void chipset_init(struct net_device *dev, int startp); -static void dump_packet(void *buf, int len); -static void ni5010_show_registers(struct net_device *dev); - -static int io; -static int irq; - -struct net_device * __init ni5010_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct ni5010_local)); - int *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - PRINTK2((KERN_DEBUG "%s: Entering ni5010_probe\n", dev->name)); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = ni5010_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { -#ifdef FULL_IODETECT - for (io=0x200; io<0x400 && ni5010_probe1(dev, io) ; io+=0x20) - ; - if (io == 0x400) - err = -ENODEV; - -#else - for (port = ports; *port && ni5010_probe1(dev, *port); port++) - ; - if (!*port) - err = -ENODEV; -#endif /* FULL_IODETECT */ - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, NI5010_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static inline int rd_port(int ioaddr) -{ - inb(IE_RBUF); - return inb(IE_SAPROM); -} - -static void __init trigger_irq(int ioaddr) -{ - outb(0x00, EDLC_RESET); /* Clear EDLC hold RESET state */ - outb(0x00, IE_RESET); /* Board reset */ - outb(0x00, EDLC_XMASK); /* Disable all Xmt interrupts */ - outb(0x00, EDLC_RMASK); /* Disable all Rcv interrupt */ - outb(0xff, EDLC_XCLR); /* Clear all pending Xmt interrupts */ - outb(0xff, EDLC_RCLR); /* Clear all pending Rcv interrupts */ - /* - * Transmit packet mode: Ignore parity, Power xcvr, - * Enable loopback - */ - outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE); - outb(RMD_BROADCAST, EDLC_RMODE); /* Receive normal&broadcast */ - outb(XM_ALL, EDLC_XMASK); /* Enable all Xmt interrupts */ - udelay(50); /* FIXME: Necessary? */ - outb(MM_EN_XMT|MM_MUX, IE_MMODE); /* Start transmission */ -} - -static const struct net_device_ops ni5010_netdev_ops = { - .ndo_open = ni5010_open, - .ndo_stop = ni5010_close, - .ndo_start_xmit = ni5010_send_packet, - .ndo_set_rx_mode = ni5010_set_multicast_list, - .ndo_tx_timeout = ni5010_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -}; - -/* - * This is the real probe routine. Linux has a history of friendly device - * probes on the ISA bus. A good device probes avoids doing writes, and - * verifies that the correct device exists and functions. - */ - -static int __init ni5010_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned version_printed; - struct ni5010_local *lp; - int i; - unsigned int data = 0; - int boguscount = 40; - int err = -ENODEV; - - dev->base_addr = ioaddr; - dev->irq = irq; - - if (!request_region(ioaddr, NI5010_IO_EXTENT, boardname)) - return -EBUSY; - - /* - * This is no "official" probe method, I've rather tested which - * probe works best with my seven NI5010 cards - * (they have very different serial numbers) - * Suggestions or failure reports are very, very welcome ! - * But I think it is a relatively good probe method - * since it doesn't use any "outb" - * It should be nearly 100% reliable ! - * well-known WARNING: this probe method (like many others) - * will hang the system if a NE2000 card region is probed ! - * - * - Andreas - */ - - PRINTK2((KERN_DEBUG "%s: entering ni5010_probe1(%#3x)\n", - dev->name, ioaddr)); - - if (inb(ioaddr+0) == 0xff) - goto out; - - while ( (rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr) & - rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr)) != 0xff) - { - if (boguscount-- == 0) - goto out; - } - - PRINTK2((KERN_DEBUG "%s: I/O #1 passed!\n", dev->name)); - - for (i=0; i<32; i++) - if ( (data = rd_port(ioaddr)) != 0xff) break; - if (data==0xff) - goto out; - - PRINTK2((KERN_DEBUG "%s: I/O #2 passed!\n", dev->name)); - - if ((data != SA_ADDR0) || (rd_port(ioaddr) != SA_ADDR1) || - (rd_port(ioaddr) != SA_ADDR2)) - goto out; - - for (i=0; i<4; i++) - rd_port(ioaddr); - - if ( (rd_port(ioaddr) != NI5010_MAGICVAL1) || - (rd_port(ioaddr) != NI5010_MAGICVAL2) ) - goto out; - - PRINTK2((KERN_DEBUG "%s: I/O #3 passed!\n", dev->name)); - - if (NI5010_DEBUG && version_printed++ == 0) - printk(KERN_INFO "%s", version); - - printk("NI5010 ethercard probe at 0x%x: ", ioaddr); - - dev->base_addr = ioaddr; - - for (i=0; i<6; i++) { - outw(i, IE_GP); - dev->dev_addr[i] = inb(IE_SAPROM); - } - printk("%pM ", dev->dev_addr); - - PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name)); - -#ifdef JUMPERED_INTERRUPTS - if (dev->irq == 0xff) - ; - else if (dev->irq < 2) { - unsigned long irq_mask; - - PRINTK2((KERN_DEBUG "%s: I/O #5 passed!\n", dev->name)); - - irq_mask = probe_irq_on(); - trigger_irq(ioaddr); - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - - PRINTK2((KERN_DEBUG "%s: I/O #6 passed!\n", dev->name)); - - if (dev->irq == 0) { - err = -EAGAIN; - printk(KERN_WARNING "%s: no IRQ found!\n", dev->name); - goto out; - } - PRINTK2((KERN_DEBUG "%s: I/O #7 passed!\n", dev->name)); - } else if (dev->irq == 2) { - dev->irq = 9; - } -#endif /* JUMPERED_INTERRUPTS */ - PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name)); - - /* DMA is not supported (yet?), so no use detecting it */ - lp = netdev_priv(dev); - - spin_lock_init(&lp->lock); - - PRINTK2((KERN_DEBUG "%s: I/O #10 passed!\n", dev->name)); - -/* get the size of the onboard receive buffer - * higher addresses than bufsize are wrapped into real buffer - * i.e. data for offs. 0x801 is written to 0x1 with a 2K onboard buffer - */ - if (!bufsize_rcv) { - outb(1, IE_MMODE); /* Put Rcv buffer on system bus */ - outw(0, IE_GP); /* Point GP at start of packet */ - outb(0, IE_RBUF); /* set buffer byte 0 to 0 */ - for (i = 1; i < 0xff; i++) { - outw(i << 8, IE_GP); /* Point GP at packet size to be tested */ - outb(i, IE_RBUF); - outw(0x0, IE_GP); /* Point GP at start of packet */ - data = inb(IE_RBUF); - if (data == i) break; - } - bufsize_rcv = i << 8; - outw(0, IE_GP); /* Point GP at start of packet */ - outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */ - } - printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); - - dev->netdev_ops = &ni5010_netdev_ops; - dev->watchdog_timeo = HZ/20; - - dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */ - - /* Shut up the ni5010 */ - outb(0, EDLC_RMASK); /* Mask all receive interrupts */ - outb(0, EDLC_XMASK); /* Mask all xmit interrupts */ - outb(0xff, EDLC_RCLR); /* Kill all pending rcv interrupts */ - outb(0xff, EDLC_XCLR); /* Kill all pending xmt interrupts */ - - printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq); - if (dev->dma) - printk(" & DMA %d", dev->dma); - printk(".\n"); - return 0; -out: - release_region(dev->base_addr, NI5010_IO_EXTENT); - return err; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * sometime after booting when the 'ifconfig' program is run. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - */ - -static int ni5010_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int i; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_open()\n", dev->name)); - - if (request_irq(dev->irq, ni5010_interrupt, 0, boardname, dev)) { - printk(KERN_WARNING "%s: Cannot get irq %#2x\n", dev->name, dev->irq); - return -EAGAIN; - } - PRINTK3((KERN_DEBUG "%s: passed open() #1\n", dev->name)); - /* - * Always allocate the DMA channel after the IRQ, - * and clean up on failure. - */ -#ifdef JUMPERED_DMA - if (request_dma(dev->dma, cardname)) { - printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma); - free_irq(dev->irq, NULL); - return -EAGAIN; - } -#endif /* JUMPERED_DMA */ - - PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name)); - /* Reset the hardware here. Don't forget to set the station address. */ - - outb(RS_RESET, EDLC_RESET); /* Hold up EDLC_RESET while configing board */ - outb(0, IE_RESET); /* Hardware reset of ni5010 board */ - outb(XMD_LBC, EDLC_XMODE); /* Only loopback xmits */ - - PRINTK3((KERN_DEBUG "%s: passed open() #3\n", dev->name)); - /* Set the station address */ - for(i = 0;i < 6; i++) { - outb(dev->dev_addr[i], EDLC_ADDR + i); - } - - PRINTK3((KERN_DEBUG "%s: Initialising ni5010\n", dev->name)); - outb(0, EDLC_XMASK); /* No xmit interrupts for now */ - outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE); - /* Normal packet xmit mode */ - outb(0xff, EDLC_XCLR); /* Clear all pending xmit interrupts */ - outb(RMD_BROADCAST, EDLC_RMODE); - /* Receive broadcast and normal packets */ - reset_receiver(dev); /* Ready ni5010 for receiving packets */ - - outb(0, EDLC_RESET); /* Un-reset the ni5010 */ - - netif_start_queue(dev); - - if (NI5010_DEBUG) ni5010_show_registers(dev); - - PRINTK((KERN_DEBUG "%s: open successful\n", dev->name)); - return 0; -} - -static void reset_receiver(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - PRINTK3((KERN_DEBUG "%s: resetting receiver\n", dev->name)); - outw(0, IE_GP); /* Receive packet at start of buffer */ - outb(0xff, EDLC_RCLR); /* Clear all pending rcv interrupts */ - outb(0, IE_MMODE); /* Put EDLC to rcv buffer */ - outb(MM_EN_RCV, IE_MMODE); /* Enable rcv */ - outb(0xff, EDLC_RMASK); /* Enable all rcv interrupts */ -} - -static void ni5010_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict" : "network cable problem"); - /* Try to restart the adaptor. */ - /* FIXME: Give it a real kick here */ - chipset_init(dev, 1); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -static int ni5010_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_send_packet\n", dev->name)); - - /* - * Block sending - */ - - netif_stop_queue(dev); - hardware_send_packet(dev, (unsigned char *)skb->data, skb->len, length-skb->len); - dev_kfree_skb (skb); - return NETDEV_TX_OK; -} - -/* - * The typical workload of the driver: - * Handle the network interface interrupts. - */ -static irqreturn_t ni5010_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ni5010_local *lp; - int ioaddr, status; - int xmit_was_error = 0; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_interrupt\n", dev->name)); - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - spin_lock(&lp->lock); - status = inb(IE_ISTAT); - PRINTK3((KERN_DEBUG "%s: IE_ISTAT = %#02x\n", dev->name, status)); - - if ((status & IS_R_INT) == 0) ni5010_rx(dev); - - if ((status & IS_X_INT) == 0) { - xmit_was_error = process_xmt_interrupt(dev); - } - - if ((status & IS_DMA_INT) == 0) { - PRINTK((KERN_DEBUG "%s: DMA complete (?)\n", dev->name)); - outb(0, IE_DMA_RST); /* Reset DMA int */ - } - - if (!xmit_was_error) - reset_receiver(dev); - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - - -static void dump_packet(void *buf, int len) -{ - int i; - - printk(KERN_DEBUG "Packet length = %#4x\n", len); - for (i = 0; i < len; i++){ - if (i % 16 == 0) printk(KERN_DEBUG "%#4.4x", i); - if (i % 2 == 0) printk(" "); - printk("%2.2x", ((unsigned char *)buf)[i]); - if (i % 16 == 15) printk("\n"); - } - printk("\n"); -} - -/* We have a good packet, get it out of the buffer. */ -static void ni5010_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - unsigned char rcv_stat; - struct sk_buff *skb; - int i_pkt_size; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_rx()\n", dev->name)); - - rcv_stat = inb(EDLC_RSTAT); - PRINTK3((KERN_DEBUG "%s: EDLC_RSTAT = %#2x\n", dev->name, rcv_stat)); - - if ( (rcv_stat & RS_VALID_BITS) != RS_PKT_OK) { - PRINTK((KERN_INFO "%s: receive error.\n", dev->name)); - dev->stats.rx_errors++; - if (rcv_stat & RS_RUNT) dev->stats.rx_length_errors++; - if (rcv_stat & RS_ALIGN) dev->stats.rx_frame_errors++; - if (rcv_stat & RS_CRC_ERR) dev->stats.rx_crc_errors++; - if (rcv_stat & RS_OFLW) dev->stats.rx_fifo_errors++; - outb(0xff, EDLC_RCLR); /* Clear the interrupt */ - return; - } - - outb(0xff, EDLC_RCLR); /* Clear the interrupt */ - - i_pkt_size = inw(IE_RCNT); - if (i_pkt_size > ETH_FRAME_LEN || i_pkt_size < 10 ) { - PRINTK((KERN_DEBUG "%s: Packet size error, packet size = %#4.4x\n", - dev->name, i_pkt_size)); - dev->stats.rx_errors++; - dev->stats.rx_length_errors++; - return; - } - - /* Malloc up new buffer. */ - skb = netdev_alloc_skb(dev, i_pkt_size + 3); - if (skb == NULL) { - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return; - } - - skb_reserve(skb, 2); - - /* Read packet into buffer */ - outb(MM_MUX, IE_MMODE); /* Rcv buffer to system bus */ - outw(0, IE_GP); /* Seek to beginning of packet */ - insb(IE_RBUF, skb_put(skb, i_pkt_size), i_pkt_size); - - if (NI5010_DEBUG >= 4) - dump_packet(skb->data, skb->len); - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += i_pkt_size; - - PRINTK2((KERN_DEBUG "%s: Received packet, size=%#4.4x\n", - dev->name, i_pkt_size)); -} - -static int process_xmt_interrupt(struct net_device *dev) -{ - struct ni5010_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int xmit_stat; - - PRINTK2((KERN_DEBUG "%s: entering process_xmt_interrupt\n", dev->name)); - - xmit_stat = inb(EDLC_XSTAT); - PRINTK3((KERN_DEBUG "%s: EDLC_XSTAT = %2.2x\n", dev->name, xmit_stat)); - - outb(0, EDLC_XMASK); /* Disable xmit IRQ's */ - outb(0xff, EDLC_XCLR); /* Clear all pending xmit IRQ's */ - - if (xmit_stat & XS_COLL){ - PRINTK((KERN_DEBUG "%s: collision detected, retransmitting\n", - dev->name)); - outw(NI5010_BUFSIZE - lp->o_pkt_size, IE_GP); - /* outb(0, IE_MMODE); */ /* xmt buf on sysbus FIXME: needed ? */ - outb(MM_EN_XMT | MM_MUX, IE_MMODE); - outb(XM_ALL, EDLC_XMASK); /* Enable xmt IRQ's */ - dev->stats.collisions++; - return 1; - } - - /* FIXME: handle other xmt error conditions */ - - dev->stats.tx_packets++; - dev->stats.tx_bytes += lp->o_pkt_size; - netif_wake_queue(dev); - - PRINTK2((KERN_DEBUG "%s: sent packet, size=%#4.4x\n", - dev->name, lp->o_pkt_size)); - - return 0; -} - -/* The inverse routine to ni5010_open(). */ -static int ni5010_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name)); -#ifdef JUMPERED_INTERRUPTS - free_irq(dev->irq, NULL); -#endif - /* Put card in held-RESET state */ - outb(0, IE_MMODE); - outb(RS_RESET, EDLC_RESET); - - netif_stop_queue(dev); - - PRINTK((KERN_DEBUG "%s: %s closed down\n", dev->name, boardname)); - return 0; - -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. -*/ -static void ni5010_set_multicast_list(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name)); - - if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || - !netdev_mc_empty(dev)) { - outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */ - PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name)); - } else { - PRINTK((KERN_DEBUG "%s: Entering broadcast mode\n", dev->name)); - outb(RMD_BROADCAST, EDLC_RMODE); /* Disable promiscuous mode, use normal mode */ - } -} - -static void hardware_send_packet(struct net_device *dev, char *buf, int length, int pad) -{ - struct ni5010_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - unsigned int buf_offs; - - PRINTK2((KERN_DEBUG "%s: entering hardware_send_packet\n", dev->name)); - - if (length > ETH_FRAME_LEN) { - PRINTK((KERN_WARNING "%s: packet too large, not possible\n", - dev->name)); - return; - } - - if (NI5010_DEBUG) ni5010_show_registers(dev); - - if (inb(IE_ISTAT) & IS_EN_XMT) { - PRINTK((KERN_WARNING "%s: sending packet while already transmitting, not possible\n", - dev->name)); - return; - } - - if (NI5010_DEBUG > 3) dump_packet(buf, length); - - buf_offs = NI5010_BUFSIZE - length - pad; - - spin_lock_irqsave(&lp->lock, flags); - lp->o_pkt_size = length + pad; - - outb(0, EDLC_RMASK); /* Mask all receive interrupts */ - outb(0, IE_MMODE); /* Put Xmit buffer on system bus */ - outb(0xff, EDLC_RCLR); /* Clear out pending rcv interrupts */ - - outw(buf_offs, IE_GP); /* Point GP at start of packet */ - outsb(IE_XBUF, buf, length); /* Put data in buffer */ - while(pad--) - outb(0, IE_XBUF); - - outw(buf_offs, IE_GP); /* Rewrite where packet starts */ - - /* should work without that outb() (Crynwr used it) */ - /*outb(MM_MUX, IE_MMODE);*/ /* Xmt buffer to EDLC bus */ - outb(MM_EN_XMT | MM_MUX, IE_MMODE); /* Begin transmission */ - outb(XM_ALL, EDLC_XMASK); /* Cause interrupt after completion or fail */ - - spin_unlock_irqrestore(&lp->lock, flags); - - netif_wake_queue(dev); - - if (NI5010_DEBUG) ni5010_show_registers(dev); -} - -static void chipset_init(struct net_device *dev, int startp) -{ - /* FIXME: Move some stuff here */ - PRINTK3((KERN_DEBUG "%s: doing NOTHING in chipset_init\n", dev->name)); -} - -static void ni5010_show_registers(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - PRINTK3((KERN_DEBUG "%s: XSTAT %#2.2x\n", dev->name, inb(EDLC_XSTAT))); - PRINTK3((KERN_DEBUG "%s: XMASK %#2.2x\n", dev->name, inb(EDLC_XMASK))); - PRINTK3((KERN_DEBUG "%s: RSTAT %#2.2x\n", dev->name, inb(EDLC_RSTAT))); - PRINTK3((KERN_DEBUG "%s: RMASK %#2.2x\n", dev->name, inb(EDLC_RMASK))); - PRINTK3((KERN_DEBUG "%s: RMODE %#2.2x\n", dev->name, inb(EDLC_RMODE))); - PRINTK3((KERN_DEBUG "%s: XMODE %#2.2x\n", dev->name, inb(EDLC_XMODE))); - PRINTK3((KERN_DEBUG "%s: ISTAT %#2.2x\n", dev->name, inb(IE_ISTAT))); -} - -#ifdef MODULE -static struct net_device *dev_ni5010; - -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "ni5010 I/O base address"); -MODULE_PARM_DESC(irq, "ni5010 IRQ number"); - -static int __init ni5010_init_module(void) -{ - PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname)); - /* - if(io <= 0 || irq == 0){ - printk(KERN_WARNING "%s: Autoprobing not allowed for modules.\n", boardname); - printk(KERN_WARNING "%s: Set symbols 'io' and 'irq'\n", boardname); - return -EINVAL; - } - */ - if (io <= 0){ - printk(KERN_WARNING "%s: Autoprobing for modules is hazardous, trying anyway..\n", boardname); - } - - PRINTK2((KERN_DEBUG "%s: init_module irq=%#2x, io=%#3x\n", boardname, irq, io)); - dev_ni5010 = ni5010_probe(-1); - if (IS_ERR(dev_ni5010)) - return PTR_ERR(dev_ni5010); - return 0; -} - -static void __exit ni5010_cleanup_module(void) -{ - PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname)); - unregister_netdev(dev_ni5010); - release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT); - free_netdev(dev_ni5010); -} -module_init(ni5010_init_module); -module_exit(ni5010_cleanup_module); -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/racal/ni5010.h b/drivers/net/ethernet/racal/ni5010.h deleted file mode 100644 index e10e717..0000000 --- a/drivers/net/ethernet/racal/ni5010.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Racal-Interlan ni5010 Ethernet definitions - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * copyrights (c) 1996 by Jan-Pascal van Best (jvbest@wi.leidenuniv.nl) - * - * I have done a look in the following sources: - * crynwr-packet-driver by Russ Nelson - */ - -#define NI5010_BUFSIZE 2048 /* number of bytes in a buffer */ - -#define NI5010_MAGICVAL0 0x00 /* magic-values for ni5010 card */ -#define NI5010_MAGICVAL1 0x55 -#define NI5010_MAGICVAL2 0xAA - -#define SA_ADDR0 0x02 -#define SA_ADDR1 0x07 -#define SA_ADDR2 0x01 - -/* The number of low I/O ports used by the ni5010 ethercard. */ -#define NI5010_IO_EXTENT 32 - -#define PRINTK(x) if (NI5010_DEBUG) printk x -#define PRINTK2(x) if (NI5010_DEBUG>=2) printk x -#define PRINTK3(x) if (NI5010_DEBUG>=3) printk x - -/* The various IE command registers */ -#define EDLC_XSTAT (ioaddr + 0x00) /* EDLC transmit csr */ -#define EDLC_XCLR (ioaddr + 0x00) /* EDLC transmit "Clear IRQ" */ -#define EDLC_XMASK (ioaddr + 0x01) /* EDLC transmit "IRQ Masks" */ -#define EDLC_RSTAT (ioaddr + 0x02) /* EDLC receive csr */ -#define EDLC_RCLR (ioaddr + 0x02) /* EDLC receive "Clear IRQ" */ -#define EDLC_RMASK (ioaddr + 0x03) /* EDLC receive "IRQ Masks" */ -#define EDLC_XMODE (ioaddr + 0x04) /* EDLC transmit Mode */ -#define EDLC_RMODE (ioaddr + 0x05) /* EDLC receive Mode */ -#define EDLC_RESET (ioaddr + 0x06) /* EDLC RESET register */ -#define EDLC_TDR1 (ioaddr + 0x07) /* "Time Domain Reflectometry" reg1 */ -#define EDLC_ADDR (ioaddr + 0x08) /* EDLC station address, 6 bytes */ - /* 0x0E doesn't exist for r/w */ -#define EDLC_TDR2 (ioaddr + 0x0f) /* "Time Domain Reflectometry" reg2 */ -#define IE_GP (ioaddr + 0x10) /* GP pointer (word register) */ - /* 0x11 is 2nd byte of GP Pointer */ -#define IE_RCNT (ioaddr + 0x10) /* Count of bytes in rcv'd packet */ - /* 0x11 is 2nd byte of "Byte Count" */ -#define IE_MMODE (ioaddr + 0x12) /* Memory Mode register */ -#define IE_DMA_RST (ioaddr + 0x13) /* IE DMA Reset. write only */ -#define IE_ISTAT (ioaddr + 0x13) /* IE Interrupt Status. read only */ -#define IE_RBUF (ioaddr + 0x14) /* IE Receive Buffer port */ -#define IE_XBUF (ioaddr + 0x15) /* IE Transmit Buffer port */ -#define IE_SAPROM (ioaddr + 0x16) /* window on station addr prom */ -#define IE_RESET (ioaddr + 0x17) /* any write causes Board Reset */ - -/* bits in EDLC_XSTAT, interrupt clear on write, status when read */ -#define XS_TPOK 0x80 /* transmit packet successful */ -#define XS_CS 0x40 /* carrier sense */ -#define XS_RCVD 0x20 /* transmitted packet received */ -#define XS_SHORT 0x10 /* transmission media is shorted */ -#define XS_UFLW 0x08 /* underflow. iff failed board */ -#define XS_COLL 0x04 /* collision occurred */ -#define XS_16COLL 0x02 /* 16th collision occurred */ -#define XS_PERR 0x01 /* parity error */ - -#define XS_CLR_UFLW 0x08 /* clear underflow */ -#define XS_CLR_COLL 0x04 /* clear collision */ -#define XS_CLR_16COLL 0x02 /* clear 16th collision */ -#define XS_CLR_PERR 0x01 /* clear parity error */ - -/* bits in EDLC_XMASK, mask/enable transmit interrupts. register is r/w */ -#define XM_TPOK 0x80 /* =1 to enable Xmt Pkt OK interrupts */ -#define XM_RCVD 0x20 /* =1 to enable Xmt Pkt Rcvd ints */ -#define XM_UFLW 0x08 /* =1 to enable Xmt Underflow ints */ -#define XM_COLL 0x04 /* =1 to enable Xmt Collision ints */ -#define XM_COLL16 0x02 /* =1 to enable Xmt 16th Coll ints */ -#define XM_PERR 0x01 /* =1 to enable Xmt Parity Error ints */ - /* note: always clear this bit */ -#define XM_ALL (XM_TPOK | XM_RCVD | XM_UFLW | XM_COLL | XM_COLL16) - -/* bits in EDLC_RSTAT, interrupt clear on write, status when read */ -#define RS_PKT_OK 0x80 /* received good packet */ -#define RS_RST_PKT 0x10 /* RESET packet received */ -#define RS_RUNT 0x08 /* Runt Pkt rcvd. Len < 64 Bytes */ -#define RS_ALIGN 0x04 /* Alignment error. not 8 bit aligned */ -#define RS_CRC_ERR 0x02 /* Bad CRC on rcvd pkt */ -#define RS_OFLW 0x01 /* overflow for rcv FIFO */ -#define RS_VALID_BITS ( RS_PKT_OK | RS_RST_PKT | RS_RUNT | RS_ALIGN | RS_CRC_ERR | RS_OFLW ) - /* all valid RSTAT bits */ - -#define RS_CLR_PKT_OK 0x80 /* clear rcvd packet interrupt */ -#define RS_CLR_RST_PKT 0x10 /* clear RESET packet received */ -#define RS_CLR_RUNT 0x08 /* clear Runt Pckt received */ -#define RS_CLR_ALIGN 0x04 /* clear Alignment error */ -#define RS_CLR_CRC_ERR 0x02 /* clear CRC error */ -#define RS_CLR_OFLW 0x01 /* clear rcv FIFO Overflow */ - -/* bits in EDLC_RMASK, mask/enable receive interrupts. register is r/w */ -#define RM_PKT_OK 0x80 /* =1 to enable rcvd good packet ints */ -#define RM_RST_PKT 0x10 /* =1 to enable RESET packet ints */ -#define RM_RUNT 0x08 /* =1 to enable Runt Pkt rcvd ints */ -#define RM_ALIGN 0x04 /* =1 to enable Alignment error ints */ -#define RM_CRC_ERR 0x02 /* =1 to enable Bad CRC error ints */ -#define RM_OFLW 0x01 /* =1 to enable overflow error ints */ - -/* bits in EDLC_RMODE, set Receive Packet mode. register is r/w */ -#define RMD_TEST 0x80 /* =1 for Chip testing. normally 0 */ -#define RMD_ADD_SIZ 0x10 /* =1 5-byte addr match. normally 0 */ -#define RMD_EN_RUNT 0x08 /* =1 enable runt rcv. normally 0 */ -#define RMD_EN_RST 0x04 /* =1 to rcv RESET pkt. normally 0 */ - -#define RMD_PROMISC 0x03 /* receive *all* packets. unusual */ -#define RMD_MULTICAST 0x02 /* receive multicasts too. unusual */ -#define RMD_BROADCAST 0x01 /* receive broadcasts & normal. usual */ -#define RMD_NO_PACKETS 0x00 /* don't receive any packets. unusual */ - -/* bits in EDLC_XMODE, set Transmit Packet mode. register is r/w */ -#define XMD_COLL_CNT 0xf0 /* coll's since success. read-only */ -#define XMD_IG_PAR 0x08 /* =1 to ignore parity. ALWAYS set */ -#define XMD_T_MODE 0x04 /* =1 to power xcvr. ALWAYS set this */ -#define XMD_LBC 0x02 /* =1 for loopbakc. normally set */ -#define XMD_DIS_C 0x01 /* =1 disables contention. normally 0 */ - -/* bits in EDLC_RESET, write only */ -#define RS_RESET 0x80 /* =1 to hold EDLC in reset state */ - -/* bits in IE_MMODE, write only */ -#define MM_EN_DMA 0x80 /* =1 begin DMA xfer, Cplt clrs it */ -#define MM_EN_RCV 0x40 /* =1 allows Pkt rcv. clr'd by rcv */ -#define MM_EN_XMT 0x20 /* =1 begin Xmt pkt. Cplt clrs it */ -#define MM_BUS_PAGE 0x18 /* =00 ALWAYS. Used when MUX=1 */ -#define MM_NET_PAGE 0x06 /* =00 ALWAYS. Used when MUX=0 */ -#define MM_MUX 0x01 /* =1 means Rcv Buff on system bus */ - /* =0 means Xmt Buff on system bus */ - -/* bits in IE_ISTAT, read only */ -#define IS_TDIAG 0x80 /* =1 if Diagnostic problem */ -#define IS_EN_RCV 0x20 /* =1 until frame is rcv'd cplt */ -#define IS_EN_XMT 0x10 /* =1 until frame is xmt'd cplt */ -#define IS_EN_DMA 0x08 /* =1 until DMA is cplt or aborted */ -#define IS_DMA_INT 0x04 /* =0 iff DMA done interrupt. */ -#define IS_R_INT 0x02 /* =0 iff unmasked Rcv interrupt */ -#define IS_X_INT 0x01 /* =0 iff unmasked Xmt interrupt */ - -- cgit v0.10.2 From 13a80cb8b72769f163834d4243bd156f1bec37dc Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 10 Jan 2013 19:19:43 -0500 Subject: drivers/net: delete at1700 ISA 10Mbit driver These Fujitsu MB86965 based ISA 10Mbit cards were another of the relatively rare cards dating from the early 1990s that for one reason or another didn't seem to get a lot of use in linux. So we retire it now with a reasonable degree of confidence that it won't impact anyone. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 4141c64..e7d916d5 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -44,7 +44,6 @@ extern struct net_device *el2_probe(int unit); extern struct net_device *ne_probe(int unit); extern struct net_device *hp_probe(int unit); extern struct net_device *hp_plus_probe(int unit); -extern struct net_device *at1700_probe(int unit); extern struct net_device *fmv18x_probe(int unit); extern struct net_device *eth16i_probe(int unit); extern struct net_device *i82596_probe(int unit); @@ -140,9 +139,6 @@ static struct devprobe2 isa_probes[] __initdata = { {cs89x0_probe, 0}, #endif #endif -#ifdef CONFIG_AT1700 - {at1700_probe, 0}, -#endif #ifdef CONFIG_ETH16I {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ #endif diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index aca1568..af114fd 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -17,18 +17,6 @@ config NET_VENDOR_FUJITSU if NET_VENDOR_FUJITSU -config AT1700 - tristate "AT1700/1720 support (EXPERIMENTAL)" - depends on ISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called at1700. - config PCMCIA_FMVJ18X tristate "Fujitsu FMV-J18x PCMCIA support" depends on PCMCIA diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile index 2730ae6..e54d0af 100644 --- a/drivers/net/ethernet/fujitsu/Makefile +++ b/drivers/net/ethernet/fujitsu/Makefile @@ -2,6 +2,5 @@ # Makefile for the Fujitsu network device drivers. # -obj-$(CONFIG_AT1700) += at1700.o obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o diff --git a/drivers/net/ethernet/fujitsu/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c deleted file mode 100644 index 4b80dc4..0000000 --- a/drivers/net/ethernet/fujitsu/at1700.c +++ /dev/null @@ -1,791 +0,0 @@ -/* at1700.c: A network device driver for the Allied Telesis AT1700. - - Written 1993-98 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is a device driver for the Allied Telesis AT1700, and - Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are - straight-forward Fujitsu MB86965 implementations. - - Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya - (tamy@flab.fujitsu.co.jp). - - Sources: - The Fujitsu MB86965 datasheet. - - After the initial version of this driver was written Gerry Sawkins of - ATI provided their EEPROM configuration code header file. - Thanks to NIIBE Yutaka for bug fixes. - - MCA bus (AT1720) support (now deleted) by Rene Schmit - - Bugs: - The MB86965 has a design flaw that makes all probes unreliable. Not - only is it difficult to detect, it also moves around in I/O space in - response to inb()s from other device probes! -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -static char version[] __initdata = - "at1700.c:v1.16 9/11/06 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#define DRV_NAME "at1700" - -/* Tunable parameters. */ - -/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */ -#define MC_FILTERBREAK 64 - -/* These unusual address orders are used to verify the CONFIG register. */ - -static int fmv18x_probe_list[] __initdata = { - 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0 -}; - -/* - * ISA - */ - -static unsigned at1700_probe_list[] __initdata = { - 0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 -}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -typedef unsigned char uchar; - -/* Information that need to be kept for each board. */ -struct net_local { - spinlock_t lock; - unsigned char mc_filter[8]; - uint jumpered:1; /* Set iff the board has jumper config. */ - uint tx_started:1; /* Packets are on the Tx queue. */ - uint tx_queue_ready:1; /* Tx queue is ready to be sent. */ - uint rx_started:1; /* Packets are Rxing. */ - uchar tx_queue; /* Number of packet on the Tx queue. */ - ushort tx_queue_len; /* Current length of the Tx queue. */ -}; - - -/* Offsets from the base address. */ -#define STATUS 0 -#define TX_STATUS 0 -#define RX_STATUS 1 -#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ -#define RX_INTR 3 -#define TX_MODE 4 -#define RX_MODE 5 -#define CONFIG_0 6 /* Misc. configuration settings. */ -#define CONFIG_1 7 -/* Run-time register bank 2 definitions. */ -#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ -#define TX_START 10 -#define COL16CNTL 11 /* Control Reg for 16 collisions */ -#define MODE13 13 -#define RX_CTRL 14 -/* Configuration registers only on the '865A/B chips. */ -#define EEPROM_Ctrl 16 -#define EEPROM_Data 17 -#define CARDSTATUS 16 /* FMV-18x Card Status */ -#define CARDSTATUS1 17 /* FMV-18x Card Status */ -#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */ -#define IOCONFIG1 19 -#define SAPROM 20 /* The station address PROM, if no EEPROM. */ -#define MODE24 24 -#define RESET 31 /* Write to reset some parts of the chip. */ -#define AT1700_IO_EXTENT 32 -#define PORT_OFFSET(o) (o) - - -#define TX_TIMEOUT (HZ/10) - - -/* Index to functions, as function prototypes. */ - -static int at1700_probe1(struct net_device *dev, int ioaddr); -static int read_eeprom(long ioaddr, int location); -static int net_open(struct net_device *dev); -static netdev_tx_t net_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id); -static void net_rx(struct net_device *dev); -static int net_close(struct net_device *dev); -static void set_rx_mode(struct net_device *dev); -static void net_tx_timeout (struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ - -static int io = 0x260; - -static int irq; - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, NULL); - release_region(dev->base_addr, AT1700_IO_EXTENT); -} - -struct net_device * __init at1700_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } else { - dev->base_addr = io; - dev->irq = irq; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = at1700_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = at1700_probe_list; *port; port++) { - if (at1700_probe1(dev, *port) == 0) - break; - dev->irq = irq; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - cleanup_card(dev); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops at1700_netdev_ops = { - .ndo_open = net_open, - .ndo_stop = net_close, - .ndo_start_xmit = net_send_packet, - .ndo_set_rx_mode = set_rx_mode, - .ndo_tx_timeout = net_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* The Fujitsu datasheet suggests that the NIC be probed for by checking its - "signature", the default bit pattern after a reset. This *doesn't* work -- - there is no way to reset the bus interface without a complete power-cycle! - - It turns out that ATI came to the same conclusion I did: the only thing - that can be done is checking a few bits and then diving right into an - EEPROM read. */ - -static int __init at1700_probe1(struct net_device *dev, int ioaddr) -{ - static const char fmv_irqmap[4] = {3, 7, 10, 15}; - static const char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15}; - static const char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15}; - unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0; - int ret = -ENODEV; - struct net_local *lp = netdev_priv(dev); - - if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Resetting the chip doesn't reset the ISA interface, so don't bother. - That means we have to be careful with the register values we probe - for. - */ -#ifdef notdef - printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n", - ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5), - read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl)); -#endif - /* We must check for the EEPROM-config boards first, else accessing - IOCONFIG0 will move the board! */ - if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr && - read_eeprom(ioaddr, 4) == 0x0000 && - (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400) - is_at1700 = 1; - else if (inb(ioaddr + SAPROM ) == 0x00 && - inb(ioaddr + SAPROM + 1) == 0x00 && - inb(ioaddr + SAPROM + 2) == 0x0e) - is_fmv18x = 1; - else { - goto err_out; - } - - /* Reset the internal state machines. */ - outb(0, ioaddr + RESET); - - if (is_at1700) { - irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04) - | (read_eeprom(ioaddr, 0)>>14)]; - } else { - /* Check PnP mode for FMV-183/184/183A/184A. */ - /* This PnP routine is very poor. IO and IRQ should be known. */ - if (inb(ioaddr + CARDSTATUS1) & 0x20) { - irq = dev->irq; - for (i = 0; i < 8; i++) { - if (irq == fmv_irqmap_pnp[i]) - break; - } - if (i == 8) { - goto err_out; - } - } else { - if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr) - goto err_out; - irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03]; - } - } - - printk("%s: %s found at %#3x, IRQ %d, address ", dev->name, - is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq); - - dev->base_addr = ioaddr; - dev->irq = irq; - - if (is_at1700) { - for(i = 0; i < 3; i++) { - unsigned short eeprom_val = read_eeprom(ioaddr, 4+i); - ((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val); - } - } else { - for(i = 0; i < 6; i++) { - unsigned char val = inb(ioaddr + SAPROM + i); - dev->dev_addr[i] = val; - } - } - printk("%pM", dev->dev_addr); - - /* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals, - rather than 150 ohm shielded twisted pair compensation. - 0x0000 == auto-sense the interface - 0x0800 == use TP interface - 0x1800 == use coax interface - */ - { - const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"}; - if (is_at1700) { - ushort setup_value = read_eeprom(ioaddr, 12); - dev->if_port = setup_value >> 8; - } else { - ushort setup_value = inb(ioaddr + CARDSTATUS); - switch (setup_value & 0x07) { - case 0x01: /* 10base5 */ - case 0x02: /* 10base2 */ - dev->if_port = 0x18; break; - case 0x04: /* 10baseT */ - dev->if_port = 0x08; break; - default: /* auto-sense */ - dev->if_port = 0x00; break; - } - } - printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); - } - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit - bus access, two 4K Tx queues, and disabled Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* Set the station address in bank zero. */ - outb(0x00, ioaddr + CONFIG_1); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i)); - - /* Switch to bank 1 and set the multicast table to accept none. */ - outb(0x04, ioaddr + CONFIG_1); - for (i = 0; i < 8; i++) - outb(0x00, ioaddr + PORT_OFFSET(8 + i)); - - - /* Switch to bank 2 */ - /* Lock our I/O address, and set manual processing mode for 16 collisions. */ - outb(0x08, ioaddr + CONFIG_1); - outb(dev->if_port, ioaddr + MODE13); - outb(0x00, ioaddr + COL16CNTL); - - if (net_debug) - printk(version); - - dev->netdev_ops = &at1700_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - spin_lock_init(&lp->lock); - - lp->jumpered = is_fmv18x; - /* Snarf the interrupt vector now. */ - ret = request_irq(irq, net_interrupt, 0, DRV_NAME, dev); - if (ret) { - printk(KERN_ERR "AT1700 at %#3x is unusable due to a " - "conflict on IRQ %d.\n", - ioaddr, irq); - goto err_out; - } - - return 0; - -err_out: - release_region(ioaddr, AT1700_IO_EXTENT); - return ret; -} - - -/* EEPROM_Ctrl bits. */ -#define EE_SHIFT_CLK 0x40 /* EEPROM shift clock, in reg. 16. */ -#define EE_CS 0x20 /* EEPROM chip select, in reg. 16. */ -#define EE_DATA_WRITE 0x80 /* EEPROM chip data in, in reg. 17. */ -#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */ - -/* The EEPROM commands include the alway-set leading bit. */ -#define EE_WRITE_CMD (5 << 6) -#define EE_READ_CMD (6 << 6) -#define EE_ERASE_CMD (7 << 6) - -static int __init read_eeprom(long ioaddr, int location) -{ - int i; - unsigned short retval = 0; - long ee_addr = ioaddr + EEPROM_Ctrl; - long ee_daddr = ioaddr + EEPROM_Data; - int read_cmd = location | EE_READ_CMD; - - /* Shift the read command bits out. */ - for (i = 9; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - outb(EE_CS, ee_addr); - outb(dataval, ee_daddr); - outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ - } - outb(EE_DATA_WRITE, ee_daddr); - for (i = 16; i > 0; i--) { - outb(EE_CS, ee_addr); - outb(EE_CS | EE_SHIFT_CLK, ee_addr); - retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0); - } - - /* Terminate the EEPROM access. */ - outb(EE_CS, ee_addr); - outb(EE_SHIFT_CLK, ee_addr); - outb(0, ee_addr); - return retval; -} - - - -static int net_open(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit - bus access, and two 4K Tx queues. */ - outb(0x5a, ioaddr + CONFIG_0); - - /* Powerup, switch to register bank 2, and enable the Rx and Tx. */ - outb(0xe8, ioaddr + CONFIG_1); - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Turn on hardware Tx and Rx interrupts. */ - outb(0x82, ioaddr + TX_INTR); - outb(0x81, ioaddr + RX_INTR); - - /* Enable the IRQ on boards of fmv18x it is feasible. */ - if (lp->jumpered) { - outb(0x80, ioaddr + IOCONFIG1); - } - - netif_start_queue(dev); - return 0; -} - -static void net_tx_timeout (struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - printk ("%s: transmit timed out with status %04x, %s?\n", dev->name, - inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80 - ? "IRQ conflict" : "network cable problem"); - printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", - dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE), - inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START), - inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL)); - dev->stats.tx_errors++; - /* ToDo: We should try to restart the adaptor... */ - outw(0xffff, ioaddr + MODE24); - outw (0xffff, ioaddr + TX_STATUS); - outb (0x5a, ioaddr + CONFIG_0); - outb (0xe8, ioaddr + CONFIG_1); - outw (0x8182, ioaddr + TX_INTR); - outb (0x00, ioaddr + TX_START); - outb (0x03, ioaddr + COL16CNTL); - - dev->trans_start = jiffies; /* prevent tx timeout */ - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - netif_wake_queue(dev); -} - - -static netdev_tx_t net_send_packet (struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - short len = skb->len; - unsigned char *buf = skb->data; - static u8 pad[ETH_ZLEN]; - - netif_stop_queue (dev); - - /* We may not start transmitting unless we finish transferring - a packet into the Tx queue. During executing the following - codes we possibly catch a Tx interrupt. Thus we flag off - tx_queue_ready, so that we prevent the interrupt routine - (net_interrupt) to start transmitting. */ - lp->tx_queue_ready = 0; - { - outw (length, ioaddr + DATAPORT); - /* Packet data */ - outsw (ioaddr + DATAPORT, buf, len >> 1); - /* Check for dribble byte */ - if (len & 1) { - outw(skb->data[skb->len-1], ioaddr + DATAPORT); - len++; - } - /* Check for packet padding */ - if (length != skb->len) - outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1); - - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_queue_ready = 1; - - if (lp->tx_started == 0) { - /* If the Tx is idle, always trigger a transmit. */ - outb (0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - lp->tx_started = 1; - netif_start_queue (dev); - } else if (lp->tx_queue_len < 4096 - 1502) - /* Yes, there is room for one more packet. */ - netif_start_queue (dev); - dev_kfree_skb (skb); - - return NETDEV_TX_OK; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t net_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - int handled = 0; - - if (dev == NULL) { - printk ("at1700_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - spin_lock (&lp->lock); - - status = inw(ioaddr + TX_STATUS); - outw(status, ioaddr + TX_STATUS); - - if (net_debug > 4) - printk("%s: Interrupt with status %04x.\n", dev->name, status); - if (lp->rx_started == 0 && - (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) { - /* Got a packet(s). - We cannot execute net_rx more than once at the same time for - the same device. During executing net_rx, we possibly catch a - Tx interrupt. Thus we flag on rx_started, so that we prevent - the interrupt routine (net_interrupt) to dive into net_rx - again. */ - handled = 1; - lp->rx_started = 1; - outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */ - net_rx(dev); - outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */ - lp->rx_started = 0; - } - if (status & 0x00ff) { - handled = 1; - if (status & 0x02) { - /* More than 16 collisions occurred */ - if (net_debug > 4) - printk("%s: 16 Collision occur during Txing.\n", dev->name); - /* Cancel sending a packet. */ - outb(0x03, ioaddr + COL16CNTL); - dev->stats.collisions++; - } - if (status & 0x82) { - dev->stats.tx_packets++; - /* The Tx queue has any packets and is not being - transferred a packet from the host, start - transmitting. */ - if (lp->tx_queue && lp->tx_queue_ready) { - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - netif_wake_queue (dev); - } else { - lp->tx_started = 0; - netif_wake_queue (dev); - } - } - } - - spin_unlock (&lp->lock); - return IRQ_RETVAL(handled); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void -net_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int boguscount = 5; - - while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { - ushort status = inw(ioaddr + DATAPORT); - ushort pkt_len = inw(ioaddr + DATAPORT); - - if (net_debug > 4) - printk("%s: Rxing packet mode %02x status %04x.\n", - dev->name, inb(ioaddr + RX_MODE), status); -#ifndef final_version - if (status == 0) { - outb(0x05, ioaddr + RX_CTRL); - break; - } -#endif - - if ((status & 0xF0) != 0x20) { /* There was an error. */ - dev->stats.rx_errors++; - if (status & 0x08) dev->stats.rx_length_errors++; - if (status & 0x04) dev->stats.rx_frame_errors++; - if (status & 0x02) dev->stats.rx_crc_errors++; - if (status & 0x01) dev->stats.rx_over_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - if (pkt_len > 1550) { - printk("%s: The AT1700 claimed a very large packet, size %d.\n", - dev->name, pkt_len); - /* Prime the FIFO and then flush the packet. */ - inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); - outb(0x05, ioaddr + RX_CTRL); - dev->stats.rx_errors++; - break; - } - skb = netdev_alloc_skb(dev, pkt_len + 3); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet (len %d).\n", - dev->name, pkt_len); - /* Prime the FIFO and then flush the packet. */ - inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); - outb(0x05, ioaddr + RX_CTRL); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb,2); - - insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); - skb->protocol=eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - if (--boguscount <= 0) - break; - } - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ - { - int i; - for (i = 0; i < 20; i++) { - if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) - break; - inw(ioaddr + DATAPORT); /* dummy status read */ - outb(0x05, ioaddr + RX_CTRL); - } - - if (net_debug > 5) - printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", - dev->name, inb(ioaddr + RX_MODE), i); - } -} - -/* The inverse routine to net_open(). */ -static int net_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - netif_stop_queue(dev); - - /* Set configuration register 0 to disable Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* No statistic counters on the chip to update. */ - - /* Disable the IRQ on boards of fmv18x where it is feasible. */ - if (lp->jumpered) - outb(0x00, ioaddr + IOCONFIG1); - - /* Power-down the chip. Green, green, green! */ - outb(0x00, ioaddr + CONFIG_1); - return 0; -} - -/* - Set the multicast/promiscuous mode for this adaptor. -*/ - -static void -set_rx_mode(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - unsigned char mc_filter[8]; /* Multicast hash filter */ - unsigned long flags; - - if (dev->flags & IFF_PROMISC) { - memset(mc_filter, 0xff, sizeof(mc_filter)); - outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ - } else if (netdev_mc_count(dev) > MC_FILTERBREAK || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter perfectly -- accept all multicasts. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - outb(2, ioaddr + RX_MODE); /* Use normal mode. */ - } else if (netdev_mc_empty(dev)) { - memset(mc_filter, 0x00, sizeof(mc_filter)); - outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */ - } else { - struct netdev_hw_addr *ha; - - memset(mc_filter, 0, sizeof(mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - unsigned int bit = - ether_crc_le(ETH_ALEN, ha->addr) >> 26; - mc_filter[bit >> 3] |= (1 << bit); - } - outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */ - } - - spin_lock_irqsave (&lp->lock, flags); - if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) { - int i; - int saved_bank = inw(ioaddr + CONFIG_0); - /* Switch to bank 1 and set the multicast table. */ - outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0); - for (i = 0; i < 8; i++) - outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i)); - memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter)); - outw(saved_bank, ioaddr + CONFIG_0); - } - spin_unlock_irqrestore (&lp->lock, flags); -} - -#ifdef MODULE -static struct net_device *dev_at1700; - -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(net_debug, int, 0); -MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); -MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); -MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); - -static int __init at1700_module_init(void) -{ - if (io == 0) - printk("at1700: You should not use auto-probing with insmod!\n"); - dev_at1700 = at1700_probe(-1); - if (IS_ERR(dev_at1700)) - return PTR_ERR(dev_at1700); - return 0; -} - -static void __exit at1700_module_exit(void) -{ - unregister_netdev(dev_at1700); - cleanup_card(dev_at1700); - free_netdev(dev_at1700); -} -module_init(at1700_module_init); -module_exit(at1700_module_exit); -#endif /* MODULE */ -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From bb37f1223a7ba9e0abf21d5392d0bb4aedce78f5 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 13 Jan 2013 19:41:14 -0500 Subject: drivers/net: delete old fujitsu based eth16i driver This is another driver for relatively rare 10Mbit hardware that originated in the early 1990's. So we select it for removal at this point in time as well. Cc: Mika Kuoppala Signed-off-by: Paul Gortmaker diff --git a/MAINTAINERS b/MAINTAINERS index 88866e6..a7aadea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2974,11 +2974,6 @@ S: Maintained F: include/linux/netfilter_bridge/ F: net/bridge/ -ETHERTEAM 16I DRIVER -M: Mika Kuoppala -S: Maintained -F: drivers/net/ethernet/fujitsu/eth16i.c - EXT2 FILE SYSTEM M: Jan Kara L: linux-ext4@vger.kernel.org diff --git a/drivers/net/Space.c b/drivers/net/Space.c index e7d916d5..15de20b 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -45,7 +45,6 @@ extern struct net_device *ne_probe(int unit); extern struct net_device *hp_probe(int unit); extern struct net_device *hp_plus_probe(int unit); extern struct net_device *fmv18x_probe(int unit); -extern struct net_device *eth16i_probe(int unit); extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); extern struct net_device *e2100_probe(int unit); @@ -139,9 +138,6 @@ static struct devprobe2 isa_probes[] __initdata = { {cs89x0_probe, 0}, #endif #endif -#ifdef CONFIG_ETH16I - {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ -#endif #ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ {ewrk3_probe, 0}, #endif diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index af114fd..c6a8762 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -28,15 +28,4 @@ config PCMCIA_FMVJ18X To compile this driver as a module, choose M here: the module will be called fmvj18x_cs. If unsure, say N. -config ETH16I - tristate "ICL EtherTeam 16i/32 support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called eth16i. - endif # NET_VENDOR_FUJITSU diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile index e54d0af..21561fd 100644 --- a/drivers/net/ethernet/fujitsu/Makefile +++ b/drivers/net/ethernet/fujitsu/Makefile @@ -2,5 +2,4 @@ # Makefile for the Fujitsu network device drivers. # -obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c deleted file mode 100644 index a992d1f..0000000 --- a/drivers/net/ethernet/fujitsu/eth16i.c +++ /dev/null @@ -1,1483 +0,0 @@ -/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux - - Written 1994-1999 by Mika Kuoppala - - Copyright (C) 1994-1999 by Mika Kuoppala - Based on skeleton.c and heavily on at1700.c by Donald Becker - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as miku@iki.fi - - This driver supports following cards : - - ICL EtherTeam 16i - - ICL EtherTeam 32 EISA - (Uses true 32 bit transfers rather than 16i compatibility mode) - - Example Module usage: - insmod eth16i.o io=0x2a0 mediatype=bnc - - mediatype can be one of the following: bnc,tp,dix,auto,eprom - - 'auto' will try to autoprobe mediatype. - 'eprom' will use whatever type defined in eprom. - - I have benchmarked driver with PII/300Mhz as a ftp client - and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec. - - Sources: - - skeleton.c a sample network driver core for linux, - written by Donald Becker - - at1700.c a driver for Allied Telesis AT1700, written - by Donald Becker. - - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i - written by Markku Viima - - The Fujitsu MB86965 databook. - - Author thanks following persons due to their valueble assistance: - Markku Viima (ICL) - Ari Valve (ICL) - Donald Becker - Kurt Huwig - - Revision history: - - Version Date Description - - 0.01 15.12-94 Initial version (card detection) - 0.02 23.01-95 Interrupt is now hooked correctly - 0.03 01.02-95 Rewrote initialization part - 0.04 07.02-95 Base skeleton done... - Made a few changes to signature checking - to make it a bit reliable. - - fixed bug in tx_buf mapping - - fixed bug in initialization (DLC_EN - wasn't enabled when initialization - was done.) - 0.05 08.02-95 If there were more than one packet to send, - transmit was jammed due to invalid - register write...now fixed - 0.06 19.02-95 Rewrote interrupt handling - 0.07 13.04-95 Wrote EEPROM read routines - Card configuration now set according to - data read from EEPROM - 0.08 23.06-95 Wrote part that tries to probe used interface - port if AUTO is selected - - 0.09 01.09-95 Added module support - - 0.10 04.09-95 Fixed receive packet allocation to work - with kernels > 1.3.x - - 0.20 20.09-95 Added support for EtherTeam32 EISA - - 0.21 17.10-95 Removed the unnecessary extern - init_etherdev() declaration. Some - other cleanups. - - 0.22 22.02-96 Receive buffer was not flushed - correctly when faulty packet was - received. Now fixed. - - 0.23 26.02-96 Made resetting the adapter - more reliable. - - 0.24 27.02-96 Rewrote faulty packet handling in eth16i_rx - - 0.25 22.05-96 kfree() was missing from cleanup_module. - - 0.26 11.06-96 Sometimes card was not found by - check_signature(). Now made more reliable. - - 0.27 23.06-96 Oops. 16 consecutive collisions halted - adapter. Now will try to retransmit - MAX_COL_16 times before finally giving up. - - 0.28 28.10-97 Added dev_id parameter (NULL) for free_irq - - 0.29 29.10-97 Multiple card support for module users - - 0.30 30.10-97 Fixed irq allocation bug. - (request_irq moved from probe to open) - - 0.30a 21.08-98 Card detection made more relaxed. Driver - had problems with some TCP/IP-PROM boots - to find the card. Suggested by - Kurt Huwig - - 0.31 28.08-98 Media interface port can now be selected - with module parameters or kernel - boot parameters. - - 0.32 31.08-98 IRQ was never freed if open/close - pair wasn't called. Now fixed. - - 0.33 10.09-98 When eth16i_open() was called after - eth16i_close() chip never recovered. - Now more shallow reset is made on - close. - - 0.34 29.06-99 Fixed one bad #ifdef. - Changed ioaddr -> io for consistency - - 0.35 01.07-99 transmit,-receive bytes were never - updated in stats. - - Bugs: - In some cases the media interface autoprobing code doesn't find - the correct interface type. In this case you can - manually choose the interface type in DOS with E16IC.EXE which is - configuration software for EtherTeam16i and EtherTeam32 cards. - This is also true for IRQ setting. You cannot use module - parameter to configure IRQ of the card (yet). - - To do: - - Real multicast support - - Rewrite the media interface autoprobing code. Its _horrible_ ! - - Possibly merge all the MB86965 specific code to external - module for use by eth16.c and Donald's at1700.c - - IRQ configuration with module parameter. I will do - this when i will get enough info about setting - irq without configuration utility. -*/ - -static char *version = - "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - - - -/* Few macros */ -#define BITSET(ioaddr, bnum) ((outb(((inb(ioaddr)) | (bnum)), ioaddr))) -#define BITCLR(ioaddr, bnum) ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr))) - -/* This is the I/O address space for Etherteam 16i adapter. */ -#define ETH16I_IO_EXTENT 32 - -/* Ticks before deciding that transmit has timed out */ -#define TX_TIMEOUT (400*HZ/1000) - -/* Maximum loop count when receiving packets */ -#define MAX_RX_LOOP 20 - -/* Some interrupt masks */ -#define ETH16I_INTR_ON 0xef8a /* Higher is receive mask */ -#define ETH16I_INTR_OFF 0x0000 - -/* Buffers header status byte meanings */ -#define PKT_GOOD BIT(5) -#define PKT_GOOD_RMT BIT(4) -#define PKT_SHORT BIT(3) -#define PKT_ALIGN_ERR BIT(2) -#define PKT_CRC_ERR BIT(1) -#define PKT_RX_BUF_OVERFLOW BIT(0) - -/* Transmit status register (DLCR0) */ -#define TX_STATUS_REG 0 -#define TX_DONE BIT(7) -#define NET_BUSY BIT(6) -#define TX_PKT_RCD BIT(5) -#define CR_LOST BIT(4) -#define TX_JABBER_ERR BIT(3) -#define COLLISION BIT(2) -#define COLLISIONS_16 BIT(1) - -/* Receive status register (DLCR1) */ -#define RX_STATUS_REG 1 -#define RX_PKT BIT(7) /* Packet received */ -#define BUS_RD_ERR BIT(6) -#define SHORT_PKT_ERR BIT(3) -#define ALIGN_ERR BIT(2) -#define CRC_ERR BIT(1) -#define RX_BUF_OVERFLOW BIT(0) - -/* Transmit Interrupt Enable Register (DLCR2) */ -#define TX_INTR_REG 2 -#define TX_INTR_DONE BIT(7) -#define TX_INTR_COL BIT(2) -#define TX_INTR_16_COL BIT(1) - -/* Receive Interrupt Enable Register (DLCR3) */ -#define RX_INTR_REG 3 -#define RX_INTR_RECEIVE BIT(7) -#define RX_INTR_SHORT_PKT BIT(3) -#define RX_INTR_CRC_ERR BIT(1) -#define RX_INTR_BUF_OVERFLOW BIT(0) - -/* Transmit Mode Register (DLCR4) */ -#define TRANSMIT_MODE_REG 4 -#define LOOPBACK_CONTROL BIT(1) -#define CONTROL_OUTPUT BIT(2) - -/* Receive Mode Register (DLCR5) */ -#define RECEIVE_MODE_REG 5 -#define RX_BUFFER_EMPTY BIT(6) -#define ACCEPT_BAD_PACKETS BIT(5) -#define RECEIVE_SHORT_ADDR BIT(4) -#define ACCEPT_SHORT_PACKETS BIT(3) -#define REMOTE_RESET BIT(2) - -#define ADDRESS_FILTER_MODE BIT(1) | BIT(0) -#define REJECT_ALL 0 -#define ACCEPT_ALL 3 -#define MODE_1 1 /* NODE ID, BC, MC, 2-24th bit */ -#define MODE_2 2 /* NODE ID, BC, MC, Hash Table */ - -/* Configuration Register 0 (DLCR6) */ -#define CONFIG_REG_0 6 -#define DLC_EN BIT(7) -#define SRAM_CYCLE_TIME_100NS BIT(6) -#define SYSTEM_BUS_WIDTH_8 BIT(5) /* 1 = 8bit, 0 = 16bit */ -#define BUFFER_WIDTH_8 BIT(4) /* 1 = 8bit, 0 = 16bit */ -#define TBS1 BIT(3) -#define TBS0 BIT(2) -#define SRAM_BS1 BIT(1) /* 00=8kb, 01=16kb */ -#define SRAM_BS0 BIT(0) /* 10=32kb, 11=64kb */ - -#ifndef ETH16I_TX_BUF_SIZE /* 0 = 2kb, 1 = 4kb */ -#define ETH16I_TX_BUF_SIZE 3 /* 2 = 8kb, 3 = 16kb */ -#endif -#define TX_BUF_1x2048 0 -#define TX_BUF_2x2048 1 -#define TX_BUF_2x4098 2 -#define TX_BUF_2x8192 3 - -/* Configuration Register 1 (DLCR7) */ -#define CONFIG_REG_1 7 -#define POWERUP BIT(5) - -/* Transmit start register */ -#define TRANSMIT_START_REG 10 -#define TRANSMIT_START_RB 2 -#define TX_START BIT(7) /* Rest of register bit indicate*/ - /* number of packets in tx buffer*/ -/* Node ID registers (DLCR8-13) */ -#define NODE_ID_0 8 -#define NODE_ID_RB 0 - -/* Hash Table registers (HT8-15) */ -#define HASH_TABLE_0 8 -#define HASH_TABLE_RB 1 - -/* Buffer memory ports */ -#define BUFFER_MEM_PORT_LB 8 -#define DATAPORT BUFFER_MEM_PORT_LB -#define BUFFER_MEM_PORT_HB 9 - -/* 16 Collision control register (BMPR11) */ -#define COL_16_REG 11 -#define HALT_ON_16 0x00 -#define RETRANS_AND_HALT_ON_16 0x02 - -/* Maximum number of attempts to send after 16 concecutive collisions */ -#define MAX_COL_16 10 - -/* DMA Burst and Transceiver Mode Register (BMPR13) */ -#define TRANSCEIVER_MODE_REG 13 -#define TRANSCEIVER_MODE_RB 2 -#define IO_BASE_UNLOCK BIT(7) -#define LOWER_SQUELCH_TRESH BIT(6) -#define LINK_TEST_DISABLE BIT(5) -#define AUI_SELECT BIT(4) -#define DIS_AUTO_PORT_SEL BIT(3) - -/* Filter Self Receive Register (BMPR14) */ -#define FILTER_SELF_RX_REG 14 -#define SKIP_RX_PACKET BIT(2) -#define FILTER_SELF_RECEIVE BIT(0) - -/* EEPROM Control Register (BMPR 16) */ -#define EEPROM_CTRL_REG 16 - -/* EEPROM Data Register (BMPR 17) */ -#define EEPROM_DATA_REG 17 - -/* NMC93CSx6 EEPROM Control Bits */ -#define CS_0 0x00 -#define CS_1 0x20 -#define SK_0 0x00 -#define SK_1 0x40 -#define DI_0 0x00 -#define DI_1 0x80 - -/* NMC93CSx6 EEPROM Instructions */ -#define EEPROM_READ 0x80 - -/* NMC93CSx6 EEPROM Addresses */ -#define E_NODEID_0 0x02 -#define E_NODEID_1 0x03 -#define E_NODEID_2 0x04 -#define E_PORT_SELECT 0x14 - #define E_PORT_BNC 0x00 - #define E_PORT_DIX 0x01 - #define E_PORT_TP 0x02 - #define E_PORT_AUTO 0x03 - #define E_PORT_FROM_EPROM 0x04 -#define E_PRODUCT_CFG 0x30 - - -/* Macro to slow down io between EEPROM clock transitions */ -#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0) - -/* Jumperless Configuration Register (BMPR19) */ -#define JUMPERLESS_CONFIG 19 - -/* ID ROM registers, writing to them also resets some parts of chip */ -#define ID_ROM_0 24 -#define ID_ROM_7 31 -#define RESET ID_ROM_0 - -/* This is the I/O address list to be probed when seeking the card */ -static unsigned int eth16i_portlist[] __initdata = { - 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 -}; - -static unsigned int eth32i_portlist[] __initdata = { - 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000, - 0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0 -}; - -/* This is the Interrupt lookup table for Eth16i card */ -static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 }; -#define NUM_OF_ISA_IRQS 4 - -/* This is the Interrupt lookup table for Eth32i card */ -static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 }; -#define EISA_IRQ_REG 0xc89 -#define NUM_OF_EISA_IRQS 8 - -static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 }; - -/* Use 0 for production, 1 for verification, >2 for debug */ -#ifndef ETH16I_DEBUG -#define ETH16I_DEBUG 0 -#endif -static unsigned int eth16i_debug = ETH16I_DEBUG; - -/* Information for each board */ - -struct eth16i_local { - unsigned char tx_started; - unsigned char tx_buf_busy; - unsigned short tx_queue; /* Number of packets in transmit buffer */ - unsigned short tx_queue_len; - unsigned int tx_buf_size; - unsigned long open_time; - unsigned long tx_buffered_packets; - unsigned long tx_buffered_bytes; - unsigned long col_16; - spinlock_t lock; -}; - -/* Function prototypes */ - -static int eth16i_probe1(struct net_device *dev, int ioaddr); -static int eth16i_check_signature(int ioaddr); -static int eth16i_probe_port(int ioaddr); -static void eth16i_set_port(int ioaddr, int porttype); -static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l); -static int eth16i_receive_probe_packet(int ioaddr); -static int eth16i_get_irq(int ioaddr); -static int eth16i_read_eeprom(int ioaddr, int offset); -static int eth16i_read_eeprom_word(int ioaddr); -static void eth16i_eeprom_cmd(int ioaddr, unsigned char command); -static int eth16i_open(struct net_device *dev); -static int eth16i_close(struct net_device *dev); -static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev); -static void eth16i_rx(struct net_device *dev); -static void eth16i_timeout(struct net_device *dev); -static irqreturn_t eth16i_interrupt(int irq, void *dev_id); -static void eth16i_reset(struct net_device *dev); -static void eth16i_timeout(struct net_device *dev); -static void eth16i_skip_packet(struct net_device *dev); -static void eth16i_multicast(struct net_device *dev); -static void eth16i_select_regbank(unsigned char regbank, int ioaddr); -static void eth16i_initialize(struct net_device *dev, int boot); - -#if 0 -static int eth16i_set_irq(struct net_device *dev); -#endif - -#ifdef MODULE -static ushort eth16i_parse_mediatype(const char* s); -#endif - -static char cardname[] __initdata = "ICL EtherTeam 16i/32"; - -static int __init do_eth16i_probe(struct net_device *dev) -{ - int i; - int ioaddr; - int base_addr = dev->base_addr; - - if(eth16i_debug > 4) - printk(KERN_DEBUG "Probing started for %s\n", cardname); - - if(base_addr > 0x1ff) /* Check only single location */ - return eth16i_probe1(dev, base_addr); - else if(base_addr != 0) /* Don't probe at all */ - return -ENXIO; - - /* Seek card from the ISA io address space */ - for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++) - if(eth16i_probe1(dev, ioaddr) == 0) - return 0; - - /* Seek card from the EISA io address space */ - for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++) - if(eth16i_probe1(dev, ioaddr) == 0) - return 0; - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init eth16i_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_eth16i_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops eth16i_netdev_ops = { - .ndo_open = eth16i_open, - .ndo_stop = eth16i_close, - .ndo_start_xmit = eth16i_tx, - .ndo_set_rx_mode = eth16i_multicast, - .ndo_tx_timeout = eth16i_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init eth16i_probe1(struct net_device *dev, int ioaddr) -{ - struct eth16i_local *lp = netdev_priv(dev); - static unsigned version_printed; - int retval; - - /* Let's grab the region */ - if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname)) - return -EBUSY; - - /* - The MB86985 chip has on register which holds information in which - io address the chip lies. First read this register and compare - it to our current io address and if match then this could - be our chip. - */ - - if(ioaddr < 0x1000) { - if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)] - != ioaddr) { - retval = -ENODEV; - goto out; - } - } - - /* Now we will go a bit deeper and try to find the chip's signature */ - - if(eth16i_check_signature(ioaddr) != 0) { - retval = -ENODEV; - goto out; - } - - /* - Now it seems that we have found a ethernet chip in this particular - ioaddr. The MB86985 chip has this feature, that when you read a - certain register it will increase it's io base address to next - configurable slot. Now when we have found the chip, first thing is - to make sure that the chip's ioaddr will hold still here. - */ - - eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr); - outb(0x00, ioaddr + TRANSCEIVER_MODE_REG); - - outb(0x00, ioaddr + RESET); /* Reset some parts of chip */ - BITSET(ioaddr + CONFIG_REG_0, BIT(7)); /* Disable the data link */ - - if( (eth16i_debug & version_printed++) == 0) - printk(KERN_INFO "%s", version); - - dev->base_addr = ioaddr; - dev->irq = eth16i_get_irq(ioaddr); - - /* Try to obtain interrupt vector */ - - if ((retval = request_irq(dev->irq, (void *)ð16i_interrupt, 0, cardname, dev))) { - printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n", - cardname, ioaddr, dev->irq); - goto out; - } - - printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ", - dev->name, cardname, ioaddr, dev->irq); - - - /* Now we will have to lock the chip's io address */ - eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr); - outb(0x38, ioaddr + TRANSCEIVER_MODE_REG); - - eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */ - - /* Now let's same some energy by shutting down the chip ;) */ - BITCLR(ioaddr + CONFIG_REG_1, POWERUP); - - /* Initialize the device structure */ - dev->netdev_ops = ð16i_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - spin_lock_init(&lp->lock); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, ETH16I_IO_EXTENT); - return retval; -} - - -static void eth16i_initialize(struct net_device *dev, int boot) -{ - int ioaddr = dev->base_addr; - int i, node_w = 0; - unsigned char node_byte = 0; - - /* Setup station address */ - eth16i_select_regbank(NODE_ID_RB, ioaddr); - for(i = 0 ; i < 3 ; i++) { - unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i); - ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val); - } - - for(i = 0; i < 6; i++) { - outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i); - if(boot) { - printk("%02x", inb(ioaddr + NODE_ID_0 + i)); - if(i != 5) - printk(":"); - } - } - - /* Now we will set multicast addresses to accept none */ - eth16i_select_regbank(HASH_TABLE_RB, ioaddr); - for(i = 0; i < 8; i++) - outb(0x00, ioaddr + HASH_TABLE_0 + i); - - /* - Now let's disable the transmitter and receiver, set the buffer ram - cycle time, bus width and buffer data path width. Also we shall - set transmit buffer size and total buffer size. - */ - - eth16i_select_regbank(2, ioaddr); - - node_byte = 0; - node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG); - - if( (node_w & 0xFF00) == 0x0800) - node_byte |= BUFFER_WIDTH_8; - - node_byte |= SRAM_BS1; - - if( (node_w & 0x00FF) == 64) - node_byte |= SRAM_BS0; - - node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2); - - outb(node_byte, ioaddr + CONFIG_REG_0); - - /* We shall halt the transmitting, if 16 collisions are detected */ - outb(HALT_ON_16, ioaddr + COL_16_REG); - -#ifdef MODULE - /* if_port already set by init_module() */ -#else - dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ? - dev->mem_start : E_PORT_FROM_EPROM; -#endif - - /* Set interface port type */ - if(boot) { - static const char * const porttype[] = { - "BNC", "DIX", "TP", "AUTO", "FROM_EPROM" - }; - - switch(dev->if_port) - { - - case E_PORT_FROM_EPROM: - dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT); - break; - - case E_PORT_AUTO: - dev->if_port = eth16i_probe_port(ioaddr); - break; - - case E_PORT_BNC: - case E_PORT_TP: - case E_PORT_DIX: - break; - } - - printk(" %s interface.\n", porttype[dev->if_port]); - - eth16i_set_port(ioaddr, dev->if_port); - } - - /* Set Receive Mode to normal operation */ - outb(MODE_2, ioaddr + RECEIVE_MODE_REG); -} - -static int eth16i_probe_port(int ioaddr) -{ - int i; - int retcode; - unsigned char dummy_packet[64]; - - /* Powerup the chip */ - outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1); - - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - - eth16i_select_regbank(NODE_ID_RB, ioaddr); - - for(i = 0; i < 6; i++) { - dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i); - dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i); - } - - dummy_packet[12] = 0x00; - dummy_packet[13] = 0x04; - memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14); - - eth16i_select_regbank(2, ioaddr); - - for(i = 0; i < 3; i++) { - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - BITCLR(ioaddr + CONFIG_REG_0, DLC_EN); - eth16i_set_port(ioaddr, i); - - if(eth16i_debug > 1) - printk(KERN_DEBUG "Set port number %d\n", i); - - retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64); - if(retcode == 0) { - retcode = eth16i_receive_probe_packet(ioaddr); - if(retcode != -1) { - if(eth16i_debug > 1) - printk(KERN_DEBUG "Eth16i interface port found at %d\n", i); - return i; - } - } - else { - if(eth16i_debug > 1) - printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n"); - } - } - - if( eth16i_debug > 1) - printk(KERN_DEBUG "Using default port\n"); - - return E_PORT_BNC; -} - -static void eth16i_set_port(int ioaddr, int porttype) -{ - unsigned short temp = 0; - - eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr); - outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG); - - temp |= DIS_AUTO_PORT_SEL; - - switch(porttype) { - - case E_PORT_BNC : - temp |= AUI_SELECT; - break; - - case E_PORT_TP : - break; - - case E_PORT_DIX : - temp |= AUI_SELECT; - BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT); - break; - } - - outb(temp, ioaddr + TRANSCEIVER_MODE_REG); - - if(eth16i_debug > 1) { - printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG)); - printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n", - inb(ioaddr+TRANSCEIVER_MODE_REG)); - } -} - -static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l) -{ - unsigned long starttime; - - outb(0xff, ioaddr + TX_STATUS_REG); - - outw(l, ioaddr + DATAPORT); - outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1); - - starttime = jiffies; - outb(TX_START | 1, ioaddr + TRANSMIT_START_REG); - - while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) { - if( time_after(jiffies, starttime + TX_TIMEOUT)) { - return -1; - } - } - - return 0; -} - -static int eth16i_receive_probe_packet(int ioaddr) -{ - unsigned long starttime; - - starttime = jiffies; - - while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) { - if( time_after(jiffies, starttime + TX_TIMEOUT)) { - - if(eth16i_debug > 1) - printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n"); - starttime = jiffies; - while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) { - if( time_after(jiffies, starttime + TX_TIMEOUT)) { - if(eth16i_debug > 1) - printk(KERN_DEBUG "Timeout occurred waiting receive packet\n"); - return -1; - } - } - - if(eth16i_debug > 1) - printk(KERN_DEBUG "RECEIVE_PACKET\n"); - return 0; /* Found receive packet */ - } - } - - if(eth16i_debug > 1) { - printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG)); - printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG)); - } - - return 0; /* Return success */ -} - -#if 0 -static int eth16i_set_irq(struct net_device* dev) -{ - const int ioaddr = dev->base_addr; - const int irq = dev->irq; - int i = 0; - - if(ioaddr < 0x1000) { - while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq) - i++; - - if(i < NUM_OF_ISA_IRQS) { - u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG); - cbyte = (cbyte & 0x3F) | (i << 6); - outb(cbyte, ioaddr + JUMPERLESS_CONFIG); - return 0; - } - } - else { - printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name); - } - - return -1; - -} -#endif - -static int __init eth16i_get_irq(int ioaddr) -{ - unsigned char cbyte; - - if( ioaddr < 0x1000) { - cbyte = inb(ioaddr + JUMPERLESS_CONFIG); - return eth16i_irqmap[((cbyte & 0xC0) >> 6)]; - } else { /* Oh..the card is EISA so method getting IRQ different */ - unsigned short index = 0; - cbyte = inb(ioaddr + EISA_IRQ_REG); - while( (cbyte & 0x01) == 0) { - cbyte = cbyte >> 1; - index++; - } - return eth32i_irqmap[index]; - } -} - -static int __init eth16i_check_signature(int ioaddr) -{ - int i; - unsigned char creg[4] = { 0 }; - - for(i = 0; i < 4 ; i++) { - - creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i); - - if(eth16i_debug > 1) - printk("eth16i: read signature byte %x at %x\n", - creg[i], - ioaddr + TRANSMIT_MODE_REG + i); - } - - creg[0] &= 0x0F; /* Mask collision cnr */ - creg[2] &= 0x7F; /* Mask DCLEN bit */ - -#if 0 - /* - This was removed because the card was sometimes left to state - from which it couldn't be find anymore. If there is need - to more strict check still this have to be fixed. - */ - if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) { - if(creg[1] != 0x42) - return -1; - } -#endif - - if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) { - creg[2] &= 0x40; - creg[3] &= 0x03; - - if( !((creg[2] == 0x40) && (creg[3] == 0x00)) ) - return -1; - } - - if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0) - return -1; - - if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00) - return -1; - - return 0; -} - -static int eth16i_read_eeprom(int ioaddr, int offset) -{ - int data = 0; - - eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset); - outb(CS_1, ioaddr + EEPROM_CTRL_REG); - data = eth16i_read_eeprom_word(ioaddr); - outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG); - - return data; -} - -static int eth16i_read_eeprom_word(int ioaddr) -{ - int i; - int data = 0; - - for(i = 16; i > 0; i--) { - outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - data = (data << 1) | - ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0); - - eeprom_slow_io(); - } - - return data; -} - -static void eth16i_eeprom_cmd(int ioaddr, unsigned char command) -{ - int i; - - outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG); - outb(DI_0, ioaddr + EEPROM_DATA_REG); - outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG); - outb(DI_1, ioaddr + EEPROM_DATA_REG); - outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG); - - for(i = 7; i >= 0; i--) { - short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 ); - outb(cmd, ioaddr + EEPROM_DATA_REG); - outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - } -} - -static int eth16i_open(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Powerup the chip */ - outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1); - - /* Initialize the chip */ - eth16i_initialize(dev, 0); - - /* Set the transmit buffer size */ - lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03]; - - if(eth16i_debug > 0) - printk(KERN_DEBUG "%s: transmit buffer size %d\n", - dev->name, lp->tx_buf_size); - - /* Now enable Transmitter and Receiver sections */ - BITCLR(ioaddr + CONFIG_REG_0, DLC_EN); - - /* Now switch to register bank 2, for run time operation */ - eth16i_select_regbank(2, ioaddr); - - lp->open_time = jiffies; - lp->tx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Turn on interrupts*/ - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - - netif_start_queue(dev); - return 0; -} - -static int eth16i_close(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - eth16i_reset(dev); - - /* Turn off interrupts*/ - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - - netif_stop_queue(dev); - - lp->open_time = 0; - - /* Disable transmit and receive */ - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - - /* Reset the chip */ - /* outb(0xff, ioaddr + RESET); */ - /* outw(0xffff, ioaddr + TX_STATUS_REG); */ - - outb(0x00, ioaddr + CONFIG_REG_1); - - return 0; -} - -static void eth16i_timeout(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - /* - If we get here, some higher level has decided that - we are broken. There should really be a "kick me" - function call instead. - */ - - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n", - dev->name, - inw(ioaddr + TX_STATUS_REG), (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ? - "IRQ conflict" : "network cable problem"); - - dev->trans_start = jiffies; /* prevent tx timeout */ - - /* Let's dump all registers */ - if(eth16i_debug > 0) { - printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n", - dev->name, inb(ioaddr + 0), - inb(ioaddr + 1), inb(ioaddr + 2), - inb(ioaddr + 3), inb(ioaddr + 4), - inb(ioaddr + 5), - inb(ioaddr + 6), inb(ioaddr + 7)); - - printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n", - dev->name, inb(ioaddr + TRANSMIT_START_REG), - inb(ioaddr + COL_16_REG)); - printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue); - printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len); - printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started); - } - dev->stats.tx_errors++; - eth16i_reset(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - netif_wake_queue(dev); -} - -static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int status = 0; - ushort length = skb->len; - unsigned char *buf; - unsigned long flags; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - buf = skb->data; - - netif_stop_queue(dev); - - /* Turn off TX interrupts */ - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - - /* We would be better doing the disable_irq tricks the 3c509 does, - that would make this suck a lot less */ - - spin_lock_irqsave(&lp->lock, flags); - - if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) { - if(eth16i_debug > 0) - printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name); - } - else { - outw(length, ioaddr + DATAPORT); - - if( ioaddr < 0x1000 ) - outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); - else { - unsigned char frag = length % 4; - outsl(ioaddr + DATAPORT, buf, length >> 2); - if( frag != 0 ) { - outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1); - if( frag == 3 ) - outsw(ioaddr + DATAPORT, - (buf + (length & 0xFFFC) + 2), 1); - } - } - lp->tx_buffered_packets++; - lp->tx_buffered_bytes = length; - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_buf_busy = 0; - - if(lp->tx_started == 0) { - /* If the transmitter is idle..always trigger a transmit */ - outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - lp->tx_started = 1; - netif_wake_queue(dev); - } - else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) { - /* There is still more room for one more packet in tx buffer */ - netif_wake_queue(dev); - } - - spin_unlock_irqrestore(&lp->lock, flags); - - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - /* Turn TX interrupts back on */ - /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */ - status = 0; - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -static void eth16i_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int boguscount = MAX_RX_LOOP; - - /* Loop until all packets have been read */ - while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) { - - /* Read status byte from receive buffer */ - ushort status = inw(ioaddr + DATAPORT); - - /* Get the size of the packet from receive buffer */ - ushort pkt_len = inw(ioaddr + DATAPORT); - - if(eth16i_debug > 4) - printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n", - dev->name, - inb(ioaddr + RECEIVE_MODE_REG), status); - - if( !(status & PKT_GOOD) ) { - dev->stats.rx_errors++; - - if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) { - dev->stats.rx_length_errors++; - eth16i_reset(dev); - return; - } - else { - eth16i_skip_packet(dev); - dev->stats.rx_dropped++; - } - } - else { /* Ok so now we should have a good packet */ - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len + 3); - if( skb == NULL ) { - printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n", - dev->name, pkt_len); - eth16i_skip_packet(dev); - dev->stats.rx_dropped++; - break; - } - - skb_reserve(skb,2); - - /* - Now let's get the packet out of buffer. - size is (pkt_len + 1) >> 1, cause we are now reading words - and it have to be even aligned. - */ - - if(ioaddr < 0x1000) - insw(ioaddr + DATAPORT, skb_put(skb, pkt_len), - (pkt_len + 1) >> 1); - else { - unsigned char *buf = skb_put(skb, pkt_len); - unsigned char frag = pkt_len % 4; - - insl(ioaddr + DATAPORT, buf, pkt_len >> 2); - - if(frag != 0) { - unsigned short rest[2]; - rest[0] = inw( ioaddr + DATAPORT ); - if(frag == 3) - rest[1] = inw( ioaddr + DATAPORT ); - - memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag); - } - } - - skb->protocol=eth_type_trans(skb, dev); - - if( eth16i_debug > 5 ) { - int i; - printk(KERN_DEBUG "%s: Received packet of length %d.\n", - dev->name, pkt_len); - for(i = 0; i < 14; i++) - printk(KERN_DEBUG " %02x", skb->data[i]); - printk(KERN_DEBUG ".\n"); - } - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - - } /* else */ - - if(--boguscount <= 0) - break; - - } /* while */ -} - -static irqreturn_t eth16i_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct eth16i_local *lp; - int ioaddr = 0, status; - int handled = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - /* Turn off all interrupts from adapter */ - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - - /* eth16i_tx won't be called */ - spin_lock(&lp->lock); - - status = inw(ioaddr + TX_STATUS_REG); /* Get the status */ - outw(status, ioaddr + TX_STATUS_REG); /* Clear status bits */ - - if (status) - handled = 1; - - if(eth16i_debug > 3) - printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status); - - if( status & 0x7f00 ) { - - dev->stats.rx_errors++; - - if(status & (BUS_RD_ERR << 8) ) - printk(KERN_WARNING "%s: Bus read error.\n",dev->name); - if(status & (SHORT_PKT_ERR << 8) ) dev->stats.rx_length_errors++; - if(status & (ALIGN_ERR << 8) ) dev->stats.rx_frame_errors++; - if(status & (CRC_ERR << 8) ) dev->stats.rx_crc_errors++; - if(status & (RX_BUF_OVERFLOW << 8) ) dev->stats.rx_over_errors++; - } - if( status & 0x001a) { - - dev->stats.tx_errors++; - - if(status & CR_LOST) dev->stats.tx_carrier_errors++; - if(status & TX_JABBER_ERR) dev->stats.tx_window_errors++; - -#if 0 - if(status & COLLISION) { - dev->stats.collisions += - ((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4); - } -#endif - if(status & COLLISIONS_16) { - if(lp->col_16 < MAX_COL_16) { - lp->col_16++; - dev->stats.collisions++; - /* Resume transmitting, skip failed packet */ - outb(0x02, ioaddr + COL_16_REG); - } - else { - printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name); - } - } - } - - if( status & 0x00ff ) { /* Let's check the transmit status reg */ - - if(status & TX_DONE) { /* The transmit has been done */ - dev->stats.tx_packets = lp->tx_buffered_packets; - dev->stats.tx_bytes += lp->tx_buffered_bytes; - lp->col_16 = 0; - - if(lp->tx_queue) { /* Is there still packets ? */ - /* There was packet(s) so start transmitting and write also - how many packets there is to be sended */ - outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - lp->tx_started = 1; - } - else { - lp->tx_started = 0; - } - netif_wake_queue(dev); - } - } - - if( ( status & 0x8000 ) || - ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) { - eth16i_rx(dev); /* We have packet in receive buffer */ - } - - /* Turn interrupts back on */ - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - - if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) { - /* There is still more room for one more packet in tx buffer */ - netif_wake_queue(dev); - } - - spin_unlock(&lp->lock); - - return IRQ_RETVAL(handled); -} - -static void eth16i_skip_packet(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - inw(ioaddr + DATAPORT); - inw(ioaddr + DATAPORT); - inw(ioaddr + DATAPORT); - - outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG); - while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0); -} - -static void eth16i_reset(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if(eth16i_debug > 1) - printk(KERN_DEBUG "%s: Resetting device.\n", dev->name); - - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - outw(0xffff, ioaddr + TX_STATUS_REG); - eth16i_select_regbank(2, ioaddr); - - lp->tx_started = 0; - lp->tx_buf_busy = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - BITCLR(ioaddr + CONFIG_REG_0, DLC_EN); -} - -static void eth16i_multicast(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) - { - outb(3, ioaddr + RECEIVE_MODE_REG); - } else { - outb(2, ioaddr + RECEIVE_MODE_REG); - } -} - -static void eth16i_select_regbank(unsigned char banknbr, int ioaddr) -{ - unsigned char data; - - data = inb(ioaddr + CONFIG_REG_1); - outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1); -} - -#ifdef MODULE - -static ushort eth16i_parse_mediatype(const char* s) -{ - if(!s) - return E_PORT_FROM_EPROM; - - if (!strncmp(s, "bnc", 3)) - return E_PORT_BNC; - else if (!strncmp(s, "tp", 2)) - return E_PORT_TP; - else if (!strncmp(s, "dix", 3)) - return E_PORT_DIX; - else if (!strncmp(s, "auto", 4)) - return E_PORT_AUTO; - else - return E_PORT_FROM_EPROM; -} - -#define MAX_ETH16I_CARDS 4 /* Max number of Eth16i cards per module */ - -static struct net_device *dev_eth16i[MAX_ETH16I_CARDS]; -static int io[MAX_ETH16I_CARDS]; -#if 0 -static int irq[MAX_ETH16I_CARDS]; -#endif -static char* mediatype[MAX_ETH16I_CARDS]; -static int debug = -1; - -MODULE_AUTHOR("Mika Kuoppala "); -MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver"); -MODULE_LICENSE("GPL"); - - -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io, "eth16i I/O base address(es)"); - -#if 0 -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq, "eth16i interrupt request number"); -#endif - -module_param_array(mediatype, charp, NULL, 0); -MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)"); - -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "eth16i debug level (0-6)"); - -int __init init_module(void) -{ - int this_dev, found = 0; - struct net_device *dev; - - for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) { - dev = alloc_etherdev(sizeof(struct eth16i_local)); - if (!dev) - break; - - dev->base_addr = io[this_dev]; - - if(debug != -1) - eth16i_debug = debug; - - if(eth16i_debug > 1) - printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" ); - - dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]); - - if(io[this_dev] == 0) { - if (this_dev != 0) { /* Only autoprobe 1st one */ - free_netdev(dev); - break; - } - - printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n"); - } - - if (do_eth16i_probe(dev) == 0) { - dev_eth16i[found++] = dev; - continue; - } - printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n", - io[this_dev]); - free_netdev(dev); - break; - } - if (found) - return 0; - return -ENXIO; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) { - struct net_device *dev = dev_eth16i[this_dev]; - - if (netdev_priv(dev)) { - unregister_netdev(dev); - free_irq(dev->irq, dev); - release_region(dev->base_addr, ETH16I_IO_EXTENT); - free_netdev(dev); - } - } -} -#endif /* MODULE */ -- cgit v0.10.2 From fce3cd45e66672744fbd58fd620c5780f3159a53 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 14 Jan 2013 20:32:46 -0500 Subject: drivers/net: delete the really obsolete 8390 based 10Mbit ISA drivers This is an area I know all too well, after being author of several 8390 drivers, and maintainer of all 8390 drivers during a large part of their active lifecycle. To that end, I can say this with a reasonable degree of confidence. The drivers deleted here represent the earliest (as in early 1990) hardware and/or rare hardware. The remaining hardware not deleted here is the more modern/sane of the lot, with ISA-PnP and jumperless "soft configuration" like the wd and smc cards had. The original ne2000 driver (ne.c) gets a pass at this time since AT/LANTIC based cards that could be both ne2000 or wd-like (with shared memory) and with jumperless configuration were made in the mid to late 1990's, and performed reasonably well for their era. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 15de20b..393b017 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -40,14 +40,10 @@ extern struct net_device *hp100_probe(int unit); extern struct net_device *ultra_probe(int unit); extern struct net_device *wd_probe(int unit); -extern struct net_device *el2_probe(int unit); extern struct net_device *ne_probe(int unit); -extern struct net_device *hp_probe(int unit); -extern struct net_device *hp_plus_probe(int unit); extern struct net_device *fmv18x_probe(int unit); extern struct net_device *i82596_probe(int unit); extern struct net_device *ewrk3_probe(int unit); -extern struct net_device *e2100_probe(int unit); extern struct net_device *ni65_probe(int unit); extern struct net_device *sonic_probe(int unit); extern struct net_device *seeq8005_probe(int unit); @@ -108,18 +104,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_WD80x3 {wd_probe, 0}, #endif -#ifdef CONFIG_EL2 /* 3c503 */ - {el2_probe, 0}, -#endif -#ifdef CONFIG_HPLAN - {hp_probe, 0}, -#endif -#ifdef CONFIG_HPLAN_PLUS - {hp_plus_probe, 0}, -#endif -#ifdef CONFIG_E2100 /* Cabletron E21xx series. */ - {e2100_probe, 0}, -#endif #if defined(CONFIG_NE2000) || \ defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */ {ne_probe, 0}, diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c deleted file mode 100644 index 0e9afe7..0000000 --- a/drivers/net/ethernet/8390/3c503.c +++ /dev/null @@ -1,778 +0,0 @@ -/* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */ -/* - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - This driver should work with the 3c503 and 3c503/16. It should be used - in shared memory mode for best performance, although it may also work - in programmed-I/O mode. - - Sources: - EtherLink II Technical Reference Manual, - EtherLink II/16 Technical Reference Manual Supplement, - 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145 - - The Crynwr 3c503 packet driver. - - Changelog: - - Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards. - Paul Gortmaker : multiple card support for module users. - rjohnson@analogic.com : Fix up PIO interface for efficient operation. - Jeff Garzik : ethtool support - -*/ - -#define DRV_NAME "3c503" -#define DRV_VERSION "1.10a" -#define DRV_RELDATE "11/17/2001" - - -static const char version[] = - DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "8390.h" -#include "3c503.h" -#define WRD_COUNT 4 - -static int el2_pio_probe(struct net_device *dev); -static int el2_probe1(struct net_device *dev, int ioaddr); - -/* A zero-terminated list of I/O addresses to be probed in PIO mode. */ -static unsigned int netcard_portlist[] __initdata = - { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0}; - -#define EL2_IO_EXTENT 16 - -static int el2_open(struct net_device *dev); -static int el2_close(struct net_device *dev); -static void el2_reset_8390(struct net_device *dev); -static void el2_init_card(struct net_device *dev); -static void el2_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset); -static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static const struct ethtool_ops netdev_ethtool_ops; - - -/* This routine probes for a memory-mapped 3c503 board by looking for - the "location register" at the end of the jumpered boot PROM space. - This works even if a PROM isn't there. - - If the ethercard isn't found there is an optional probe for - ethercard jumpered to programmed-I/O mode. - */ -static int __init do_el2_probe(struct net_device *dev) -{ - int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0}; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return el2_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (addr = addrs; *addr; addr++) { - void __iomem *p = ioremap(*addr, 1); - unsigned base_bits; - int i; - - if (!p) - continue; - base_bits = readb(p); - iounmap(p); - i = ffs(base_bits) - 1; - if (i == -1 || base_bits != (1 << i)) - continue; - if (el2_probe1(dev, netcard_portlist[i]) == 0) - return 0; - dev->irq = irq; - } -#if ! defined(no_probe_nonshared_memory) - return el2_pio_probe(dev); -#else - return -ENODEV; -#endif -} - -/* Try all of the locations that aren't obviously empty. This touches - a lot of locations, and is much riskier than the code above. */ -static int __init -el2_pio_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return el2_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; netcard_portlist[i]; i++) { - if (el2_probe1(dev, netcard_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init el2_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_el2_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops el2_netdev_ops = { - .ndo_open = el2_open, - .ndo_stop = el2_close, - - .ndo_start_xmit = eip_start_xmit, - .ndo_tx_timeout = eip_tx_timeout, - .ndo_get_stats = eip_get_stats, - .ndo_set_rx_mode = eip_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = eip_poll, -#endif -}; - -/* Probe for the Etherlink II card at I/O port base IOADDR, - returning non-zero on success. If found, set the station - address and memory parameters in DEVICE. */ -static int __init -el2_probe1(struct net_device *dev, int ioaddr) -{ - int i, iobase_reg, membase_reg, saved_406, wordlength, retval; - static unsigned version_printed; - unsigned long vendor_id; - - if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) { - retval = -EBUSY; - goto out; - } - - /* Reset and/or avoid any lurking NE2000 */ - if (inb(ioaddr + 0x408) == 0xff) { - mdelay(1); - retval = -ENODEV; - goto out1; - } - - /* We verify that it's a 3C503 board by checking the first three octets - of its ethernet address. */ - iobase_reg = inb(ioaddr+0x403); - membase_reg = inb(ioaddr+0x404); - /* ASIC location registers should be 0 or have only a single bit set. */ - if ((iobase_reg & (iobase_reg - 1)) || - (membase_reg & (membase_reg - 1))) { - retval = -ENODEV; - goto out1; - } - saved_406 = inb_p(ioaddr + 0x406); - outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */ - outb_p(ECNTRL_THIN, ioaddr + 0x406); - /* Map the station addr PROM into the lower I/O ports. We now check - for both the old and new 3Com prefix */ - outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406); - vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2); - if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) { - /* Restore the register we frobbed. */ - outb(saved_406, ioaddr + 0x406); - retval = -ENODEV; - goto out1; - } - - if (ei_debug && version_printed++ == 0) - pr_debug("%s", version); - - dev->base_addr = ioaddr; - - pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr); - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); - pr_cont("%pM", dev->dev_addr); - - /* Map the 8390 back into the window. */ - outb(ECNTRL_THIN, ioaddr + 0x406); - - /* Check for EL2/16 as described in tech. man. */ - outb_p(E8390_PAGE0, ioaddr + E8390_CMD); - outb_p(0, ioaddr + EN0_DCFG); - outb_p(E8390_PAGE2, ioaddr + E8390_CMD); - wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS; - outb_p(E8390_PAGE0, ioaddr + E8390_CMD); - - /* Probe for, turn on and clear the board's shared memory. */ - if (ei_debug > 2) - pr_cont(" memory jumpers %2.2x ", membase_reg); - outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */ - - /* This should be probed for (or set via an ioctl()) at run-time. - Right now we use a sleazy hack to pass in the interface number - at boot-time via the low bits of the mem_end field. That value is - unused, and the low bits would be discarded even if it was used. */ -#if defined(EI8390_THICK) || defined(EL2_AUI) - ei_status.interface_num = 1; -#else - ei_status.interface_num = dev->mem_end & 0xf; -#endif - pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex"); - - if ((membase_reg & 0xf0) == 0) { - dev->mem_start = 0; - ei_status.name = "3c503-PIO"; - ei_status.mem = NULL; - } else { - dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) + - ((membase_reg & 0xA0) ? 0x4000 : 0); -#define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256 - ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE); - -#ifdef EL2MEMTEST - /* This has never found an error, but someone might care. - Note that it only tests the 2nd 8kB on 16kB 3c503/16 - cards between card addr. 0x2000 and 0x3fff. */ - { /* Check the card's memory. */ - void __iomem *mem_base = ei_status.mem; - unsigned int test_val = 0xbbadf00d; - writel(0xba5eba5e, mem_base); - for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) { - writel(test_val, mem_base + i); - if (readl(mem_base) != 0xba5eba5e || - readl(mem_base + i) != test_val) { - pr_warning("3c503: memory failure or memory address conflict.\n"); - dev->mem_start = 0; - ei_status.name = "3c503-PIO"; - iounmap(mem_base); - ei_status.mem = NULL; - break; - } - test_val += 0x55555555; - writel(0, mem_base + i); - } - } -#endif /* EL2MEMTEST */ - - if (dev->mem_start) - dev->mem_end = dev->mem_start + EL2_MEMSIZE; - - if (wordlength) { /* No Tx pages to skip over to get to Rx */ - ei_status.priv = 0; - ei_status.name = "3c503/16"; - } else { - ei_status.priv = TX_PAGES * 256; - ei_status.name = "3c503"; - } - } - - /* - Divide up the memory on the card. This is the same regardless of - whether shared-mem or PIO is used. For 16 bit cards (16kB RAM), - we use the entire 8k of bank1 for an Rx ring. We only use 3k - of the bank0 for 2 full size Tx packet slots. For 8 bit cards, - (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining - 5kB for an Rx ring. */ - - if (wordlength) { - ei_status.tx_start_page = EL2_MB0_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG; - } else { - ei_status.tx_start_page = EL2_MB1_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; - } - - /* Finish setting the board's parameters. */ - ei_status.stop_page = EL2_MB1_STOP_PG; - ei_status.word16 = wordlength; - ei_status.reset_8390 = el2_reset_8390; - ei_status.get_8390_hdr = el2_get_8390_hdr; - ei_status.block_input = el2_block_input; - ei_status.block_output = el2_block_output; - - if (dev->irq == 2) - dev->irq = 9; - else if (dev->irq > 5 && dev->irq != 9) { - pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n", - dev->irq); - dev->irq = 0; - } - - ei_status.saved_irq = dev->irq; - - dev->netdev_ops = &el2_netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops; - - retval = register_netdev(dev); - if (retval) - goto out1; - - if (dev->mem_start) - pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n", - dev->name, ei_status.name, (wordlength+1)<<3, - dev->mem_start, dev->mem_end-1); - - else - { - ei_status.tx_start_page = EL2_MB1_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; - pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n", - dev->name, ei_status.name, (wordlength+1)<<3); - } - release_region(ioaddr + 0x400, 8); - return 0; -out1: - release_region(ioaddr + 0x400, 8); -out: - release_region(ioaddr, EL2_IO_EXTENT); - return retval; -} - -static irqreturn_t el2_probe_interrupt(int irq, void *seen) -{ - *(bool *)seen = true; - return IRQ_HANDLED; -} - -static int -el2_open(struct net_device *dev) -{ - int retval; - - if (dev->irq < 2) { - static const int irqlist[] = {5, 9, 3, 4, 0}; - const int *irqp = irqlist; - - outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ - do { - bool seen; - - retval = request_irq(*irqp, el2_probe_interrupt, 0, - dev->name, &seen); - if (retval == -EBUSY) - continue; - if (retval < 0) - goto err_disable; - - /* Twinkle the interrupt, and check if it's seen. */ - seen = false; - smp_wmb(); - outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); - outb_p(0x00, E33G_IDCFR); - msleep(1); - free_irq(*irqp, &seen); - if (!seen) - continue; - - retval = request_irq(dev->irq = *irqp, eip_interrupt, 0, - dev->name, dev); - if (retval == -EBUSY) - continue; - if (retval < 0) - goto err_disable; - break; - } while (*++irqp); - - if (*irqp == 0) { - err_disable: - outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ - return -EAGAIN; - } - } else { - if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) { - return retval; - } - } - - el2_init_card(dev); - eip_open(dev); - return 0; -} - -static int -el2_close(struct net_device *dev) -{ - free_irq(dev->irq, dev); - dev->irq = ei_status.saved_irq; - outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ - - eip_close(dev); - return 0; -} - -/* This is called whenever we have a unrecoverable failure: - transmit timeout - Bad ring buffer packet header - */ -static void -el2_reset_8390(struct net_device *dev) -{ - if (ei_debug > 1) { - pr_debug("%s: Resetting the 3c503 board...", dev->name); - pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR), - E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR)); - } - outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL); - ei_status.txing = 0; - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); - el2_init_card(dev); - if (ei_debug > 1) - pr_cont("done\n"); -} - -/* Initialize the 3c503 GA registers after a reset. */ -static void -el2_init_card(struct net_device *dev) -{ - /* Unmap the station PROM and select the DIX or BNC connector. */ - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); - - /* Set ASIC copy of rx's first and last+1 buffer pages */ - /* These must be the same as in the 8390. */ - outb(ei_status.rx_start_page, E33G_STARTPG); - outb(ei_status.stop_page, E33G_STOPPG); - - /* Point the vector pointer registers somewhere ?harmless?. */ - outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */ - outb(0xff, E33G_VP1); - outb(0x00, E33G_VP0); - /* Turn off all interrupts until we're opened. */ - outb_p(0x00, dev->base_addr + EN0_IMR); - /* Enable IRQs iff started. */ - outb(EGACFR_NORM, E33G_GACFR); - - /* Set the interrupt line. */ - outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR); - outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */ - outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */ - outb_p(0x00, E33G_DMAAL); - return; /* We always succeed */ -} - -/* - * Either use the shared memory (if enabled on the board) or put the packet - * out through the ASIC FIFO. - */ -static void -el2_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - unsigned short int *wrd; - int boguscount; /* timeout counter */ - unsigned short word; /* temporary for better machine code */ - void __iomem *base = ei_status.mem; - - if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */ - outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR); - else - outb(EGACFR_NORM, E33G_GACFR); - - if (base) { /* Shared memory transfer */ - memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8), - buf, count); - outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */ - return; - } - -/* - * No shared memory, put the packet out the other way. - * Set up then start the internal memory transfer to Tx Start Page - */ - - word = (unsigned short)start_page; - outb(word&0xFF, E33G_DMAAH); - outb(word>>8, E33G_DMAAL); - - outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT - | ECNTRL_START, E33G_CNTRL); - -/* - * Here I am going to write data to the FIFO as quickly as possible. - * Note that E33G_FIFOH is defined incorrectly. It is really - * E33G_FIFOL, the lowest port address for both the byte and - * word write. Variable 'count' is NOT checked. Caller must supply a - * valid count. Note that I may write a harmless extra byte to the - * 8390 if the byte-count was not even. - */ - wrd = (unsigned short int *) buf; - count = (count + 1) >> 1; - for(;;) - { - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name); - el2_reset_8390(dev); - goto blocked; - } - } - if(count > WRD_COUNT) - { - outsw(E33G_FIFOH, wrd, WRD_COUNT); - wrd += WRD_COUNT; - count -= WRD_COUNT; - } - else - { - outsw(E33G_FIFOH, wrd, count); - break; - } - } - blocked:; - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - -/* Read the 4 byte, page aligned 8390 specific header. */ -static void -el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int boguscount; - void __iomem *base = ei_status.mem; - unsigned short word; - - if (base) { /* Use the shared memory. */ - void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = le16_to_cpu(hdr->count); - return; - } - -/* - * No shared memory, use programmed I/O. - */ - - word = (unsigned short)ring_page; - outb(word&0xFF, E33G_DMAAH); - outb(word>>8, E33G_DMAAL); - - outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT - | ECNTRL_START, E33G_CNTRL); - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name); - memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr)); - el2_reset_8390(dev); - goto blocked; - } - } - insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1); - blocked:; - outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - - -static void -el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int boguscount = 0; - void __iomem *base = ei_status.mem; - unsigned short int *buf; - unsigned short word; - - /* Maybe enable shared memory just be to be safe... nahh.*/ - if (base) { /* Use the shared memory. */ - ring_offset -= (EL2_MB1_START_PG<<8); - if (ring_offset + count > EL2_MEMSIZE) { - /* We must wrap the input move. */ - int semi_count = EL2_MEMSIZE - ring_offset; - memcpy_fromio(skb->data, base + ring_offset, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count); - } else { - memcpy_fromio(skb->data, base + ring_offset, count); - } - return; - } - -/* - * No shared memory, use programmed I/O. - */ - word = (unsigned short) ring_offset; - outb(word>>8, E33G_DMAAH); - outb(word&0xFF, E33G_DMAAL); - - outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT - | ECNTRL_START, E33G_CNTRL); - -/* - * Here I also try to get data as fast as possible. I am betting that I - * can read one extra byte without clobbering anything in the kernel because - * this would only occur on an odd byte-count and allocation of skb->data - * is word-aligned. Variable 'count' is NOT checked. Caller must check - * for a valid count. - * [This is currently quite safe.... but if one day the 3c503 explodes - * you know where to come looking ;)] - */ - - buf = (unsigned short int *) skb->data; - count = (count + 1) >> 1; - for(;;) - { - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name); - el2_reset_8390(dev); - goto blocked; - } - } - if(count > WRD_COUNT) - { - insw(E33G_FIFOH, buf, WRD_COUNT); - buf += WRD_COUNT; - count -= WRD_COUNT; - } - else - { - insw(E33G_FIFOH, buf, count); - break; - } - } - blocked:; - outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - -#ifdef MODULE -#define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */ - -static struct net_device *dev_el2[MAX_EL2_CARDS]; -static int io[MAX_EL2_CARDS]; -static int irq[MAX_EL2_CARDS]; -static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */ -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(xcvr, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); -MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ - if (do_el2_probe(dev) == 0) { - dev_el2[found++] = dev; - continue; - } - free_netdev(dev); - pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: el2_close() handles free_irq */ - release_region(dev->base_addr, EL2_IO_EXTENT); - if (ei_status.mem) - iounmap(ei_status.mem); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { - struct net_device *dev = dev_el2[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/3c503.h b/drivers/net/ethernet/8390/3c503.h deleted file mode 100644 index e2367b8..0000000 --- a/drivers/net/ethernet/8390/3c503.h +++ /dev/null @@ -1,91 +0,0 @@ -/* Definitions for the 3Com 3c503 Etherlink 2. */ -/* This file is distributed under the GPL. - Many of these names and comments are directly from the Crynwr packet - drivers, which are released under the GPL. */ - -#define EL2H (dev->base_addr + 0x400) -#define EL2L (dev->base_addr) - -/* Vendor unique hardware addr. prefix. 3Com has 2 because they ran - out of available addresses on the first one... */ - -#define OLD_3COM_ID 0x02608c -#define NEW_3COM_ID 0x0020af - -/* Shared memory management parameters. NB: The 8 bit cards have only - one bank (MB1) which serves both Tx and Rx packet space. The 16bit - cards have 2 banks, MB0 for Tx packets, and MB1 for Rx packets. - You choose which bank appears in the sh. mem window with EGACFR_MBSn */ - -#define EL2_MB0_START_PG (0x00) /* EL2/16 Tx packets go in bank 0 */ -#define EL2_MB1_START_PG (0x20) /* First page of bank 1 */ -#define EL2_MB1_STOP_PG (0x40) /* Last page +1 of bank 1 */ - -/* 3Com 3c503 ASIC registers */ -#define E33G_STARTPG (EL2H+0) /* Start page, matching EN0_STARTPG */ -#define E33G_STOPPG (EL2H+1) /* Stop page, must match EN0_STOPPG */ -#define E33G_DRQCNT (EL2H+2) /* DMA burst count */ -#define E33G_IOBASE (EL2H+3) /* Read of I/O base jumpers. */ - /* (non-useful, but it also appears at the end of EPROM space) */ -#define E33G_ROMBASE (EL2H+4) /* Read of memory base jumpers. */ -#define E33G_GACFR (EL2H+5) /* Config/setup bits for the ASIC GA */ -#define E33G_CNTRL (EL2H+6) /* Board's main control register */ -#define E33G_STATUS (EL2H+7) /* Status on completions. */ -#define E33G_IDCFR (EL2H+8) /* Interrupt/DMA config register */ - /* (Which IRQ to assert, DMA chan to use) */ -#define E33G_DMAAH (EL2H+9) /* High byte of DMA address reg */ -#define E33G_DMAAL (EL2H+10) /* Low byte of DMA address reg */ -/* "Vector pointer" - if this address matches a read, the EPROM (rather than - shared RAM) is mapped into memory space. */ -#define E33G_VP2 (EL2H+11) -#define E33G_VP1 (EL2H+12) -#define E33G_VP0 (EL2H+13) -#define E33G_FIFOH (EL2H+14) /* FIFO for programmed I/O moves */ -#define E33G_FIFOL (EL2H+15) /* ... low byte of above. */ - -/* Bits in E33G_CNTRL register: */ - -#define ECNTRL_RESET (0x01) /* Software reset of the ASIC and 8390 */ -#define ECNTRL_THIN (0x02) /* Onboard xcvr enable, AUI disable */ -#define ECNTRL_AUI (0x00) /* Onboard xcvr disable, AUI enable */ -#define ECNTRL_SAPROM (0x04) /* Map the station address prom */ -#define ECNTRL_DBLBFR (0x20) /* FIFO configuration bit */ -#define ECNTRL_OUTPUT (0x40) /* PC-to-3C503 direction if 1 */ -#define ECNTRL_INPUT (0x00) /* 3C503-to-PC direction if 0 */ -#define ECNTRL_START (0x80) /* Start the DMA logic */ - -/* Bits in E33G_STATUS register: */ - -#define ESTAT_DPRDY (0x80) /* Data port (of FIFO) ready */ -#define ESTAT_UFLW (0x40) /* Tried to read FIFO when it was empty */ -#define ESTAT_OFLW (0x20) /* Tried to write FIFO when it was full */ -#define ESTAT_DTC (0x10) /* Terminal Count from PC bus DMA logic */ -#define ESTAT_DIP (0x08) /* DMA In Progress */ - -/* Bits in E33G_GACFR register: */ - -#define EGACFR_NIM (0x80) /* NIC interrupt mask */ -#define EGACFR_TCM (0x40) /* DMA term. count interrupt mask */ -#define EGACFR_RSEL (0x08) /* Map a bank of card mem into system mem */ -#define EGACFR_MBS2 (0x04) /* Memory bank select, bit 2. */ -#define EGACFR_MBS1 (0x02) /* Memory bank select, bit 1. */ -#define EGACFR_MBS0 (0x01) /* Memory bank select, bit 0. */ - -#define EGACFR_NORM (0x49) /* TCM | RSEL | MBS0 */ -#define EGACFR_IRQOFF (0xc9) /* TCM | RSEL | MBS0 | NIM */ - -/* - MBS2 MBS1 MBS0 Sh. mem windows card mem at: - ---- ---- ---- ----------------------------- - 0 0 0 0x0000 -- bank 0 - 0 0 1 0x2000 -- bank 1 (only choice for 8bit card) - 0 1 0 0x4000 -- bank 2, not used - 0 1 1 0x6000 -- bank 3, not used - -There was going to be a 32k card that used bank 2 and 3, but it -never got produced. - -*/ - - -/* End of 3C503 parameter definitions */ diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index e49a442..1b78ca7 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -21,18 +21,6 @@ config NET_VENDOR_8390 if NET_VENDOR_8390 -config EL2 - tristate "3c503 \"EtherLink II\" support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called 3c503. - config PCMCIA_AXNET tristate "Asix AX88190 PCMCIA support" depends on PCMCIA @@ -62,42 +50,6 @@ config AX88796_93CX6 ---help--- Select this if your platform comes with an external 93CX6 eeprom. -config E2100 - tristate "Cabletron E21xx support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called e2100. - -config HPLAN_PLUS - tristate "HP PCLAN+ (27247B and 27252A) support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called hp-plus. - -config HPLAN - tristate "HP PCLAN (27245 and other 27xxx series) support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called hp. - config HYDRA tristate "Hydra support" depends on ZORRO diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index e8bb97c..588954a 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -6,10 +6,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_AX88796) += ax88796.o -obj-$(CONFIG_E2100) += e2100.o 8390.o -obj-$(CONFIG_EL2) += 3c503.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o -obj-$(CONFIG_HPLAN) += hp.o 8390p.o obj-$(CONFIG_HYDRA) += hydra.o 8390.o obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c deleted file mode 100644 index ed55ce8..0000000 --- a/drivers/net/ethernet/8390/e2100.c +++ /dev/null @@ -1,489 +0,0 @@ -/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */ -/* - Written 1993-1994 by Donald Becker. - - Copyright 1994 by Donald Becker. - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - This is a driver for the Cabletron E2100 series ethercards. - - The Author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - The E2100 series ethercard is a fairly generic shared memory 8390 - implementation. The only unusual aspect is the way the shared memory - registers are set: first you do an inb() in what is normally the - station address region, and the low three bits of next outb() *address* - is used as the write value for that register. Either someone wasn't - too used to dem bit en bites, or they were trying to obfuscate the - programming interface. - - There is an additional complication when setting the window on the packet - buffer. You must first do a read into the packet buffer region with the - low 8 address bits the address setting the page for the start of the packet - buffer window, and then do the above operation. See mem_on() for details. - - One bug on the chip is that even a hard reset won't disable the memory - window, usually resulting in a hung machine if mem_off() isn't called. - If this happens, you must power down the machine for about 30 seconds. -*/ - -static const char version[] = - "e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -#define DRV_NAME "e2100" - -static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0}; - -/* Offsets from the base_addr. - Read from the ASIC register, and the low three bits of the next outb() - address is used to set the corresponding register. */ -#define E21_NIC_OFFSET 0 /* Offset to the 8390 NIC. */ -#define E21_ASIC 0x10 -#define E21_MEM_ENABLE 0x10 -#define E21_MEM_ON 0x05 /* Enable memory in 16 bit mode. */ -#define E21_MEM_ON_8 0x07 /* Enable memory in 8 bit mode. */ -#define E21_MEM_BASE 0x11 -#define E21_IRQ_LOW 0x12 /* The low three bits of the IRQ number. */ -#define E21_IRQ_HIGH 0x14 /* The high IRQ bit and media select ... */ -#define E21_MEDIA 0x14 /* (alias). */ -#define E21_ALT_IFPORT 0x02 /* Set to use the other (BNC,AUI) port. */ -#define E21_BIG_MEM 0x04 /* Use a bigger (64K) buffer (we don't) */ -#define E21_SAPROM 0x10 /* Offset to station address data. */ -#define E21_IO_EXTENT 0x20 - -static inline void mem_on(short port, volatile char __iomem *mem_base, - unsigned char start_page ) -{ - /* This is a little weird: set the shared memory window by doing a - read. The low address bits specify the starting page. */ - readb(mem_base+start_page); - inb(port + E21_MEM_ENABLE); - outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON); -} - -static inline void mem_off(short port) -{ - inb(port + E21_MEM_ENABLE); - outb(0x00, port + E21_MEM_ENABLE); -} - -/* In other drivers I put the TX pages first, but the E2100 window circuitry - is designed to have a 4K Tx region last. The windowing circuitry wraps the - window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring - appear contiguously in the window. */ -#define E21_RX_START_PG 0x00 /* First page of RX buffer */ -#define E21_RX_STOP_PG 0x30 /* Last page +1 of RX ring */ -#define E21_BIG_RX_STOP_PG 0xF0 /* Last page +1 of RX ring */ -#define E21_TX_START_PG E21_RX_STOP_PG /* First page of TX buffer */ - -static int e21_probe1(struct net_device *dev, int ioaddr); - -static int e21_open(struct net_device *dev); -static void e21_reset_8390(struct net_device *dev); -static void e21_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void e21_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static int e21_open(struct net_device *dev); -static int e21_close(struct net_device *dev); - - -/* Probe for the E2100 series ethercards. These cards have an 8390 at the - base address and the station address at both offset 0x10 and 0x18. I read - the station address from offset 0x18 to avoid the dataport of NE2000 - ethercards, and look for Ctron's unique ID (first three octets of the - station address). - */ - -static int __init do_e2100_probe(struct net_device *dev) -{ - int *port; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return e21_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (port = e21_probe_list; *port; port++) { - dev->irq = irq; - if (e21_probe1(dev, *port) == 0) - return 0; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init e2100_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_e2100_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops e21_netdev_ops = { - .ndo_open = e21_open, - .ndo_stop = e21_close, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init e21_probe1(struct net_device *dev, int ioaddr) -{ - int i, status, retval; - unsigned char *station_addr = dev->dev_addr; - static unsigned version_printed; - - if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* First check the station address for the Ctron prefix. */ - if (inb(ioaddr + E21_SAPROM + 0) != 0x00 || - inb(ioaddr + E21_SAPROM + 1) != 0x00 || - inb(ioaddr + E21_SAPROM + 2) != 0x1d) { - retval = -ENODEV; - goto out; - } - - /* Verify by making certain that there is a 8390 at there. */ - outb(E8390_NODMA + E8390_STOP, ioaddr); - udelay(1); /* we want to delay one I/O cycle - which is 2MHz */ - status = inb(ioaddr); - if (status != 0x21 && status != 0x23) { - retval = -ENODEV; - goto out; - } - - /* Read the station address PROM. */ - for (i = 0; i < 6; i++) - station_addr[i] = inb(ioaddr + E21_SAPROM + i); - - inb(ioaddr + E21_MEDIA); /* Point to media selection. */ - outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */ - - if (ei_debug && version_printed++ == 0) - printk(version); - - for (i = 0; i < 6; i++) - printk(" %02X", station_addr[i]); - - if (dev->irq < 2) { - static const int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4}; - for (i = 0; i < ARRAY_SIZE(irqlist); i++) - if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) { - dev->irq = irqlist[i]; - break; - } - if (i >= ARRAY_SIZE(irqlist)) { - printk(" unable to get IRQ %d.\n", dev->irq); - retval = -EAGAIN; - goto out; - } - } else if (dev->irq == 2) /* Fixup luser bogosity: IRQ2 is really IRQ9 */ - dev->irq = 9; - - /* The 8390 is at the base address. */ - dev->base_addr = ioaddr; - - ei_status.name = "E2100"; - ei_status.word16 = 1; - ei_status.tx_start_page = E21_TX_START_PG; - ei_status.rx_start_page = E21_RX_START_PG; - ei_status.stop_page = E21_RX_STOP_PG; - ei_status.saved_irq = dev->irq; - - /* Check the media port used. The port can be passed in on the - low mem_end bits. */ - if (dev->mem_end & 15) - dev->if_port = dev->mem_end & 7; - else { - dev->if_port = 0; - inb(ioaddr + E21_MEDIA); /* Turn automatic media detection on. */ - for(i = 0; i < 6; i++) - if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) { - dev->if_port = 1; - break; - } - } - - /* Never map in the E21 shared memory unless you are actively using it. - Also, the shared memory has effective only one setting -- spread all - over the 128K region! */ - if (dev->mem_start == 0) - dev->mem_start = 0xd0000; - - ei_status.mem = ioremap(dev->mem_start, 2*1024); - if (!ei_status.mem) { - printk("unable to remap memory\n"); - retval = -EAGAIN; - goto out; - } - -#ifdef notdef - /* These values are unused. The E2100 has a 2K window into the packet - buffer. The window can be set to start on any page boundary. */ - ei_status.rmem_start = dev->mem_start + TX_PAGES*256; - dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024; -#endif - - printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq, - dev->if_port ? "secondary" : "primary", dev->mem_start); - - ei_status.reset_8390 = &e21_reset_8390; - ei_status.block_input = &e21_block_input; - ei_status.block_output = &e21_block_output; - ei_status.get_8390_hdr = &e21_get_8390_hdr; - - dev->netdev_ops = &e21_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out; - return 0; -out: - release_region(ioaddr, E21_IO_EXTENT); - return retval; -} - -static int -e21_open(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - int retval; - - if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) - return retval; - - /* Set the interrupt line and memory base on the hardware. */ - inb(ioaddr + E21_IRQ_LOW); - outb(0, ioaddr + E21_ASIC + (dev->irq & 7)); - inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */ - outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0) - + (dev->if_port ? E21_ALT_IFPORT : 0)); - inb(ioaddr + E21_MEM_BASE); - outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7)); - - ei_open(dev); - return 0; -} - -static void -e21_reset_8390(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - outb(0x01, ioaddr); - if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies); - ei_status.txing = 0; - - /* Set up the ASIC registers, just in case something changed them. */ - - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. We put the 2k window so the header page - appears at the start of the shared memory. */ - -static void -e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - - short ioaddr = dev->base_addr; - char __iomem *shared_mem = ei_status.mem; - - mem_on(ioaddr, shared_mem, ring_page); - -#ifdef notdef - /* Officially this is what we are doing, but the readl() is faster */ - memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr)); -#else - ((unsigned int*)hdr)[0] = readl(shared_mem); -#endif - - /* Turn off memory access: we would need to reprogram the window anyway. */ - mem_off(ioaddr); - -} - -/* Block input and output are easy on shared memory ethercards. - The E21xx makes block_input() especially easy by wrapping the top - ring buffer to the bottom automatically. */ -static void -e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - short ioaddr = dev->base_addr; - char __iomem *shared_mem = ei_status.mem; - - mem_on(ioaddr, shared_mem, (ring_offset>>8)); - - memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count); - - mem_off(ioaddr); -} - -static void -e21_block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) -{ - short ioaddr = dev->base_addr; - volatile char __iomem *shared_mem = ei_status.mem; - - /* Set the shared memory window start by doing a read, with the low address - bits specifying the starting page. */ - readb(shared_mem + start_page); - mem_on(ioaddr, shared_mem, start_page); - - memcpy_toio(shared_mem, buf, count); - mem_off(ioaddr); -} - -static int -e21_close(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - - free_irq(dev->irq, dev); - dev->irq = ei_status.saved_irq; - - /* Shut off the interrupt line and secondary interface. */ - inb(ioaddr + E21_IRQ_LOW); - outb(0, ioaddr + E21_ASIC); - inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */ - outb(0, ioaddr + E21_ASIC); - - ei_close(dev); - - /* Double-check that the memory has been turned off, because really - really bad things happen if it isn't. */ - mem_off(ioaddr); - - return 0; -} - - -#ifdef MODULE -#define MAX_E21_CARDS 4 /* Max number of E21 cards per module */ -static struct net_device *dev_e21[MAX_E21_CARDS]; -static int io[MAX_E21_CARDS]; -static int irq[MAX_E21_CARDS]; -static int mem[MAX_E21_CARDS]; -static int xcvr[MAX_E21_CARDS]; /* choose int. or ext. xcvr */ - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param_array(xcvr, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, " memory base address(es)"); -MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); -MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; - dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ - if (do_e2100_probe(dev) == 0) { - dev_e21[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: e21_close() handles free_irq */ - iounmap(ei_status.mem); - release_region(dev->base_addr, E21_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) { - struct net_device *dev = dev_e21[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c deleted file mode 100644 index 52f70f9..0000000 --- a/drivers/net/ethernet/8390/hp-plus.c +++ /dev/null @@ -1,505 +0,0 @@ -/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */ -/* - Written 1994 by Donald Becker. - - This driver is for the Hewlett Packard PC LAN (27***) plus ethercards. - These cards are sold under several model numbers, usually 2724*. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - As is often the case, a great deal of credit is owed to Russ Nelson. - The Crynwr packet driver was my primary source of HP-specific - programming information. -*/ - -static const char version[] = -"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include - -#include /* Important -- this inlines word moves. */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -#define DRV_NAME "hp-plus" - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int hpplus_portlist[] __initdata = -{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0}; - -/* - The HP EtherTwist chip implementation is a fairly routine DP8390 - implementation. It allows both shared memory and programmed-I/O buffer - access, using a custom interface for both. The programmed-I/O mode is - entirely implemented in the HP EtherTwist chip, bypassing the problem - ridden built-in 8390 facilities used on NE2000 designs. The shared - memory mode is likewise special, with an offset register used to make - packets appear at the shared memory base. Both modes use a base and bounds - page register to hide the Rx ring buffer wrap -- a packet that spans the - end of physical buffer memory appears continuous to the driver. (c.f. the - 3c503 and Cabletron E2100) - - A special note: the internal buffer of the board is only 8 bits wide. - This lays several nasty traps for the unaware: - - the 8390 must be programmed for byte-wide operations - - all I/O and memory operations must work on whole words (the access - latches are serially preloaded and have no byte-swapping ability). - - This board is laid out in I/O space much like the earlier HP boards: - the first 16 locations are for the board registers, and the second 16 are - for the 8390. The board is easy to identify, with both a dedicated 16 bit - ID register and a constant 0x530* value in the upper bits of the paging - register. -*/ - -#define HP_ID 0x00 /* ID register, always 0x4850. */ -#define HP_PAGING 0x02 /* Registers visible @ 8-f, see PageName. */ -#define HPP_OPTION 0x04 /* Bitmapped options, see HP_Option. */ -#define HPP_OUT_ADDR 0x08 /* I/O output location in Perf_Page. */ -#define HPP_IN_ADDR 0x0A /* I/O input location in Perf_Page. */ -#define HP_DATAPORT 0x0c /* I/O data transfer in Perf_Page. */ -#define NIC_OFFSET 0x10 /* Offset to the 8390 registers. */ -#define HP_IO_EXTENT 32 - -#define HP_START_PG 0x00 /* First page of TX buffer */ -#define HP_STOP_PG 0x80 /* Last page +1 of RX ring */ - -/* The register set selected in HP_PAGING. */ -enum PageName { - Perf_Page = 0, /* Normal operation. */ - MAC_Page = 1, /* The ethernet address (+checksum). */ - HW_Page = 2, /* EEPROM-loaded hardware parameters. */ - LAN_Page = 4, /* Transceiver selection, testing, etc. */ - ID_Page = 6 }; - -/* The bit definitions for the HPP_OPTION register. */ -enum HP_Option { - NICReset = 1, ChipReset = 2, /* Active low, really UNreset. */ - EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20, - MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, }; - -static int hpp_probe1(struct net_device *dev, int ioaddr); - -static void hpp_reset_8390(struct net_device *dev); -static int hpp_open(struct net_device *dev); -static int hpp_close(struct net_device *dev); -static void hpp_mem_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void hpp_mem_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void hpp_io_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void hpp_io_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); - - -/* Probe a list of addresses for an HP LAN+ adaptor. - This routine is almost boilerplate. */ - -static int __init do_hpp_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return hpp_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; hpplus_portlist[i]; i++) { - if (hpp_probe1(dev, hpplus_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init hp_plus_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_hpp_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops hpp_netdev_ops = { - .ndo_open = hpp_open, - .ndo_stop = hpp_close, - .ndo_start_xmit = eip_start_xmit, - .ndo_tx_timeout = eip_tx_timeout, - .ndo_get_stats = eip_get_stats, - .ndo_set_rx_mode = eip_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = eip_poll, -#endif -}; - - -/* Do the interesting part of the probe at a single address. */ -static int __init hpp_probe1(struct net_device *dev, int ioaddr) -{ - int i, retval; - unsigned char checksum = 0; - const char name[] = "HP-PC-LAN+"; - int mem_start; - static unsigned version_printed; - - if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Check for the HP+ signature, 50 48 0x 53. */ - if (inw(ioaddr + HP_ID) != 0x4850 || - (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) { - retval = -ENODEV; - goto out; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s at %#3x, ", dev->name, name, ioaddr); - - /* Retrieve and checksum the station address. */ - outw(MAC_Page, ioaddr + HP_PAGING); - - for(i = 0; i < ETH_ALEN; i++) { - unsigned char inval = inb(ioaddr + 8 + i); - dev->dev_addr[i] = inval; - checksum += inval; - } - checksum += inb(ioaddr + 14); - - printk("%pM", dev->dev_addr); - - if (checksum != 0xff) { - printk(" bad checksum %2.2x.\n", checksum); - retval = -ENODEV; - goto out; - } else { - /* Point at the Software Configuration Flags. */ - outw(ID_Page, ioaddr + HP_PAGING); - printk(" ID %4.4x", inw(ioaddr + 12)); - } - - /* Read the IRQ line. */ - outw(HW_Page, ioaddr + HP_PAGING); - { - int irq = inb(ioaddr + 13) & 0x0f; - int option = inw(ioaddr + HPP_OPTION); - - dev->irq = irq; - if (option & MemEnable) { - mem_start = inw(ioaddr + 9) << 8; - printk(", IRQ %d, memory address %#x.\n", irq, mem_start); - } else { - mem_start = 0; - printk(", IRQ %d, programmed-I/O mode.\n", irq); - } - } - - /* Set the wrap registers for string I/O reads. */ - outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14); - - /* Set the base address to point to the NIC, not the "real" base! */ - dev->base_addr = ioaddr + NIC_OFFSET; - - dev->netdev_ops = &hpp_netdev_ops; - - ei_status.name = name; - ei_status.word16 = 0; /* Agggghhhhh! Debug time: 2 days! */ - ei_status.tx_start_page = HP_START_PG; - ei_status.rx_start_page = HP_START_PG + TX_PAGES/2; - ei_status.stop_page = HP_STOP_PG; - - ei_status.reset_8390 = &hpp_reset_8390; - ei_status.block_input = &hpp_io_block_input; - ei_status.block_output = &hpp_io_block_output; - ei_status.get_8390_hdr = &hpp_io_get_8390_hdr; - - /* Check if the memory_enable flag is set in the option register. */ - if (mem_start) { - ei_status.block_input = &hpp_mem_block_input; - ei_status.block_output = &hpp_mem_block_output; - ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr; - dev->mem_start = mem_start; - ei_status.mem = ioremap(mem_start, - (HP_STOP_PG - HP_START_PG)*256); - if (!ei_status.mem) { - retval = -ENOMEM; - goto out; - } - ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256; - dev->mem_end = ei_status.rmem_end - = dev->mem_start + (HP_STOP_PG - HP_START_PG)*256; - } - - outw(Perf_Page, ioaddr + HP_PAGING); - NS8390p_init(dev, 0); - /* Leave the 8390 and HP chip reset. */ - outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - iounmap(ei_status.mem); -out: - release_region(ioaddr, HP_IO_EXTENT); - return retval; -} - -static int -hpp_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg; - int retval; - - if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) { - return retval; - } - - /* Reset the 8390 and HP chip. */ - option_reg = inw(ioaddr + HPP_OPTION); - outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION); - udelay(5); - /* Unreset the board and enable interrupts. */ - outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION); - - /* Set the wrap registers for programmed-I/O operation. */ - outw(HW_Page, ioaddr + HP_PAGING); - outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14); - - /* Select the operational page. */ - outw(Perf_Page, ioaddr + HP_PAGING); - - return eip_open(dev); -} - -static int -hpp_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - free_irq(dev->irq, dev); - eip_close(dev); - outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset, - ioaddr + HPP_OPTION); - - return 0; -} - -static void -hpp_reset_8390(struct net_device *dev) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies); - - outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION); - /* Pause a few cycles for the hardware reset to take place. */ - udelay(5); - ei_status.txing = 0; - outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION); - - udelay(5); - - - if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0) - printk("%s: hp_reset_8390() did not complete.\n", dev->name); - - if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies); -} - -/* The programmed-I/O version of reading the 4 byte 8390 specific header. - Note that transfer with the EtherTwist+ must be on word boundaries. */ - -static void -hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - - outw((ring_page<<8), ioaddr + HPP_IN_ADDR); - insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); -} - -/* Block input and output, similar to the Crynwr packet driver. */ - -static void -hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - char *buf = skb->data; - - outw(ring_offset, ioaddr + HPP_IN_ADDR); - insw(ioaddr + HP_DATAPORT, buf, count>>1); - if (count & 0x01) - buf[count-1] = inw(ioaddr + HP_DATAPORT); -} - -/* The corresponding shared memory versions of the above 2 functions. */ - -static void -hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - outw((ring_page<<8), ioaddr + HPP_IN_ADDR); - outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION); - memcpy_fromio(hdr, ei_status.mem, sizeof(struct e8390_pkt_hdr)); - outw(option_reg, ioaddr + HPP_OPTION); - hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3; /* Round up allocation. */ -} - -static void -hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - outw(ring_offset, ioaddr + HPP_IN_ADDR); - - outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION); - - /* Caution: this relies on get_8390_hdr() rounding up count! - Also note that we *can't* use eth_io_copy_and_sum() because - it will not always copy "count" bytes (e.g. padded IP). */ - - memcpy_fromio(skb->data, ei_status.mem, count); - outw(option_reg, ioaddr + HPP_OPTION); -} - -/* A special note: we *must* always transfer >=16 bit words. - It's always safe to round up, so we do. */ -static void -hpp_io_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - outw(start_page << 8, ioaddr + HPP_OUT_ADDR); - outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2); -} - -static void -hpp_mem_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - outw(start_page << 8, ioaddr + HPP_OUT_ADDR); - outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION); - memcpy_toio(ei_status.mem, buf, (count + 3) & ~3); - outw(option_reg, ioaddr + HPP_OPTION); -} - - -#ifdef MODULE -#define MAX_HPP_CARDS 4 /* Max number of HPP cards per module */ -static struct net_device *dev_hpp[MAX_HPP_CARDS]; -static int io[MAX_HPP_CARDS]; -static int irq[MAX_HPP_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O port address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected"); -MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (do_hpp_probe(dev) == 0) { - dev_hpp[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: hpp_close() handles free_irq */ - iounmap(ei_status.mem); - release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) { - struct net_device *dev = dev_hpp[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c deleted file mode 100644 index 37fa89a..0000000 --- a/drivers/net/ethernet/8390/hp.c +++ /dev/null @@ -1,438 +0,0 @@ -/* hp.c: A HP LAN ethernet driver for linux. */ -/* - Written 1993-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is a driver for the HP PC-LAN adaptors. - - Sources: - The Crynwr packet driver. -*/ - -static const char version[] = - "hp.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8390.h" - -#define DRV_NAME "hp" - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int hppclan_portlist[] __initdata = -{ 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240, 0}; - -#define HP_IO_EXTENT 32 - -#define HP_DATAPORT 0x0c /* "Remote DMA" data port. */ -#define HP_ID 0x07 -#define HP_CONFIGURE 0x08 /* Configuration register. */ -#define HP_RUN 0x01 /* 1 == Run, 0 == reset. */ -#define HP_IRQ 0x0E /* Mask for software-configured IRQ line. */ -#define HP_DATAON 0x10 /* Turn on dataport */ -#define NIC_OFFSET 0x10 /* Offset the 8390 registers. */ - -#define HP_START_PG 0x00 /* First page of TX buffer */ -#define HP_8BSTOP_PG 0x80 /* Last page +1 of RX ring */ -#define HP_16BSTOP_PG 0xFF /* Same, for 16 bit cards. */ - -static int hp_probe1(struct net_device *dev, int ioaddr); - -static void hp_reset_8390(struct net_device *dev); -static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void hp_block_input(struct net_device *dev, int count, - struct sk_buff *skb , int ring_offset); -static void hp_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); - -static void hp_init_card(struct net_device *dev); - -/* The map from IRQ number to HP_CONFIGURE register setting. */ -/* My default is IRQ5 0 1 2 3 4 5 6 7 8 9 10 11 */ -static char irqmap[16] __initdata= { 0, 0, 4, 6, 8,10, 0,14, 0, 4, 2,12,0,0,0,0}; - - -/* Probe for an HP LAN adaptor. - Also initialize the card and fill in STATION_ADDR with the station - address. */ - -static int __init do_hp_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return hp_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; hppclan_portlist[i]; i++) { - if (hp_probe1(dev, hppclan_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init hp_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_hp_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static int __init hp_probe1(struct net_device *dev, int ioaddr) -{ - int i, retval, board_id, wordmode; - const char *name; - static unsigned version_printed; - - if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Check for the HP physical address, 08 00 09 xx xx xx. */ - /* This really isn't good enough: we may pick up HP LANCE boards - also! Avoid the lance 0x5757 signature. */ - if (inb(ioaddr) != 0x08 - || inb(ioaddr+1) != 0x00 - || inb(ioaddr+2) != 0x09 - || inb(ioaddr+14) == 0x57) { - retval = -ENODEV; - goto out; - } - - /* Set up the parameters based on the board ID. - If you have additional mappings, please mail them to me -djb. */ - if ((board_id = inb(ioaddr + HP_ID)) & 0x80) { - name = "HP27247"; - wordmode = 1; - } else { - name = "HP27250"; - wordmode = 0; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr); - - for(i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(ioaddr + i); - - printk(" %pM", dev->dev_addr); - - /* Snarf the interrupt now. Someday this could be moved to open(). */ - if (dev->irq < 2) { - static const int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0}; - static const int irq_8list[] = { 7, 5, 3, 4, 9, 0}; - const int *irqp = wordmode ? irq_16list : irq_8list; - do { - int irq = *irqp; - if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) { - unsigned long cookie = probe_irq_on(); - /* Twinkle the interrupt, and check if it's seen. */ - outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE); - outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE); - if (irq == probe_irq_off(cookie) /* It's a good IRQ line! */ - && request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) { - printk(" selecting IRQ %d.\n", irq); - dev->irq = *irqp; - break; - } - } - } while (*++irqp); - if (*irqp == 0) { - printk(" no free IRQ lines.\n"); - retval = -EBUSY; - goto out; - } - } else { - if (dev->irq == 2) - dev->irq = 9; - if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) { - printk (" unable to get IRQ %d.\n", dev->irq); - goto out; - } - } - - /* Set the base address to point to the NIC, not the "real" base! */ - dev->base_addr = ioaddr + NIC_OFFSET; - dev->netdev_ops = &eip_netdev_ops; - - ei_status.name = name; - ei_status.word16 = wordmode; - ei_status.tx_start_page = HP_START_PG; - ei_status.rx_start_page = HP_START_PG + TX_PAGES; - ei_status.stop_page = wordmode ? HP_16BSTOP_PG : HP_8BSTOP_PG; - - ei_status.reset_8390 = hp_reset_8390; - ei_status.get_8390_hdr = hp_get_8390_hdr; - ei_status.block_input = hp_block_input; - ei_status.block_output = hp_block_output; - hp_init_card(dev); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, HP_IO_EXTENT); - return retval; -} - -static void -hp_reset_8390(struct net_device *dev) -{ - int hp_base = dev->base_addr - NIC_OFFSET; - int saved_config = inb_p(hp_base + HP_CONFIGURE); - - if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies); - outb_p(0x00, hp_base + HP_CONFIGURE); - ei_status.txing = 0; - /* Pause just a few cycles for the hardware reset to take place. */ - udelay(5); - - outb_p(saved_config, hp_base + HP_CONFIGURE); - udelay(5); - - if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0) - printk("%s: hp_reset_8390() did not complete.\n", dev->name); - - if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies); -} - -static void -hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int nic_base = dev->base_addr; - int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE); - - outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base); - outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); - outb_p(0, nic_base + EN0_RCNTHI); - outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base); - - if (ei_status.word16) - insw(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); - else - insb(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)); - - outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE); -} - -/* Block input and output, similar to the Crynwr packet driver. If you are - porting to a new ethercard look at the packet driver source for hints. - The HP LAN doesn't use shared memory -- we put the packet - out through the "remote DMA" dataport. */ - -static void -hp_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int nic_base = dev->base_addr; - int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE); - int xfer_count = count; - char *buf = skb->data; - - outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base); - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); - outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base); - if (ei_status.word16) { - insw(nic_base - NIC_OFFSET + HP_DATAPORT,buf,count>>1); - if (count & 0x01) - buf[count-1] = inb(nic_base - NIC_OFFSET + HP_DATAPORT), xfer_count++; - } else { - insb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count); - } - /* This is for the ALPHA version only, remove for later releases. */ - if (ei_debug > 0) { /* DMA termination address check... */ - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - int addr = (high << 8) + low; - /* Check only the lower 8 bits so we can ignore ring wrap. */ - if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff)) - printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); - } - outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE); -} - -static void -hp_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int nic_base = dev->base_addr; - int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE); - - outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE); - /* Round the count up for word writes. Do we need to do this? - What effect will an odd byte count have on the 8390? - I should check someday. */ - if (ei_status.word16 && (count & 0x01)) - count++; - /* We should already be in page 0, but to be safe... */ - outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base); - -#ifdef NE8390_RW_BUGFIX - /* Handle the read-before-write bug the same way as the - Crynwr packet driver -- the NatSemi method doesn't work. */ - outb_p(0x42, nic_base + EN0_RCNTLO); - outb_p(0, nic_base + EN0_RCNTHI); - outb_p(0xff, nic_base + EN0_RSARLO); - outb_p(0x00, nic_base + EN0_RSARHI); -#define NE_CMD 0x00 - outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); - /* Make certain that the dummy read has occurred. */ - inb_p(0x61); - inb_p(0x61); -#endif - - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(0x00, nic_base + EN0_RSARLO); - outb_p(start_page, nic_base + EN0_RSARHI); - - outb_p(E8390_RWRITE+E8390_START, nic_base); - if (ei_status.word16) { - /* Use the 'rep' sequence for 16 bit boards. */ - outsw(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count>>1); - } else { - outsb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count); - } - - /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken! */ - - /* This is for the ALPHA version only, remove for later releases. */ - if (ei_debug > 0) { /* DMA termination address check... */ - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - int addr = (high << 8) + low; - if ((start_page << 8) + count != addr) - printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n", - dev->name, (start_page << 8) + count, addr); - } - outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE); -} - -/* This function resets the ethercard if something screws up. */ -static void __init -hp_init_card(struct net_device *dev) -{ - int irq = dev->irq; - NS8390p_init(dev, 0); - outb_p(irqmap[irq&0x0f] | HP_RUN, - dev->base_addr - NIC_OFFSET + HP_CONFIGURE); -} - -#ifdef MODULE -#define MAX_HP_CARDS 4 /* Max number of HP cards per module */ -static struct net_device *dev_hp[MAX_HP_CARDS]; -static int io[MAX_HP_CARDS]; -static int irq[MAX_HP_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_DESCRIPTION("HP PC-LAN ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (do_hp_probe(dev) == 0) { - dev_hp[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, dev); - release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) { - struct net_device *dev = dev_hp[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ -- cgit v0.10.2 From 1f1c7a5c1dca01dd8f3f740420f92c7d1d2ae080 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 16 Jan 2013 19:32:34 -0500 Subject: drivers/net: delete old DEC depca ISA drivers support. These are old ISA 10Mbit cards from the 1st 1/2 of the 1990s and required manual jumper settings in order to configure them. Here we remove them on the premise that they are no longer used in any modern 3.9+ kernels. Signed-off-by: Paul Gortmaker diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 1abfff2..6ec1d6f 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -52,8 +52,6 @@ de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt - info on using the DECnet networking layer in Linux. -depca.txt - - the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver dl2k.txt - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko). dm9000.txt diff --git a/Documentation/networking/depca.txt b/Documentation/networking/depca.txt deleted file mode 100644 index 24c6b26..0000000 --- a/Documentation/networking/depca.txt +++ /dev/null @@ -1,92 +0,0 @@ - -DE10x -===== - -Memory Addresses: - - SW1 SW2 SW3 SW4 -64K on on on on d0000 dbfff - off on on on c0000 cbfff - off off on on e0000 ebfff - -32K on on off on d8000 dbfff - off on off on c8000 cbfff - off off off on e8000 ebfff - -DBR ROM on on dc000 dffff - off on cc000 cffff - off off ec000 effff - -Note that the 2K mode is set by SW3/SW4 on/off or off/off. Address -assignment is through the RBSA register. - -I/O Address: - SW5 -0x300 on -0x200 off - -Remote Boot: - SW6 -Disable on -Enable off - -Remote Boot Timeout: - SW7 -2.5min on -30s off - -IRQ: - SW8 SW9 SW10 SW11 SW12 -2 on off off off off -3 off on off off off -4 off off on off off -5 off off off on off -7 off off off off on - -DE20x -===== - -Memory Size: - - SW3 SW4 -64K on on -32K off on -2K on off -2K off off - -Start Addresses: - - SW1 SW2 SW3 SW4 -64K on on on on c0000 cffff - on off on on d0000 dffff - off on on on e0000 effff - -32K on on off off c8000 cffff - on off off off d8000 dffff - off on off off e8000 effff - -Illegal off off - - - - - -I/O Address: - SW5 -0x300 on -0x200 off - -Remote Boot: - SW6 -Disable on -Enable off - -Remote Boot Timeout: - SW7 -2.5min on -30s off - -IRQ: - SW8 SW9 SW10 SW11 SW12 -5 on off off off off -9 off on off off off -10 off off on off off -11 off off off on off -15 off off off off on - diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 3046133..13d74aa 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -105,19 +105,6 @@ config DECLANCE DEC (now Compaq) based on the AMD LANCE chipset, including the DEPCA series. (This chipset is better known via the NE2100 cards.) -config DEPCA - tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" - depends on (ISA || EISA) - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - as well as - . - - To compile this driver as a module, choose M here. The module - will be called depca. - config HPLANCE bool "HP on-board LANCE support" depends on DIO diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile index 175caa5..cdd4301 100644 --- a/drivers/net/ethernet/amd/Makefile +++ b/drivers/net/ethernet/amd/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o obj-$(CONFIG_ARIADNE) += ariadne.o obj-$(CONFIG_ATARILANCE) += atarilance.o obj-$(CONFIG_DECLANCE) += declance.o -obj-$(CONFIG_DEPCA) += depca.o obj-$(CONFIG_HPLANCE) += hplance.o 7990.o obj-$(CONFIG_LANCE) += lance.o obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o diff --git a/drivers/net/ethernet/amd/depca.c b/drivers/net/ethernet/amd/depca.c deleted file mode 100644 index 34a4853..0000000 --- a/drivers/net/ethernet/amd/depca.c +++ /dev/null @@ -1,1910 +0,0 @@ -/* depca.c: A DIGITAL DEPCA & EtherWORKS ethernet driver for linux. - - Written 1994, 1995 by David C. Davies. - - - Copyright 1994 David C. Davies - and - United States Government - (as represented by the Director, National Security Agency). - - Copyright 1995 Digital Equipment Corporation. - - - This software may be used and distributed according to the terms of - the GNU General Public License, incorporated herein by reference. - - This driver is written for the Digital Equipment Corporation series - of DEPCA and EtherWORKS ethernet cards: - - DEPCA (the original) - DE100 - DE101 - DE200 Turbo - DE201 Turbo - DE202 Turbo (TP BNC) - DE210 - DE422 (EISA) - - The driver has been tested on DE100, DE200 and DE202 cards in a - relatively busy network. The DE422 has been tested a little. - - This driver will NOT work for the DE203, DE204 and DE205 series of - cards, since they have a new custom ASIC in place of the AMD LANCE - chip. See the 'ewrk3.c' driver in the Linux source tree for running - those cards. - - I have benchmarked the driver with a DE100 at 595kB/s to (542kB/s from) - a DECstation 5000/200. - - The author may be reached at davies@maniac.ultranet.com - - ========================================================================= - - The driver was originally based on the 'lance.c' driver from Donald - Becker which is included with the standard driver distribution for - linux. V0.4 is a complete re-write with only the kernel interface - remaining from the original code. - - 1) Lance.c code in /linux/drivers/net/ - 2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook", - AMD, 1992 [(800) 222-9323]. - 3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)", - AMD, Pub. #17881, May 1993. - 4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA", - AMD, Pub. #16907, May 1992 - 5) "DEC EtherWORKS LC Ethernet Controller Owners Manual", - Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003 - 6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual", - Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003 - 7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR - Digital Equipment Corporation, 1989 - 8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual", - Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001 - - - Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this - driver. - - The original DEPCA card requires that the ethernet ROM address counter - be enabled to count and has an 8 bit NICSR. The ROM counter enabling is - only done when a 0x08 is read as the first address octet (to minimise - the chances of writing over some other hardware's I/O register). The - NICSR accesses have been changed to byte accesses for all the cards - supported by this driver, since there is only one useful bit in the MSB - (remote boot timeout) and it is not used. Also, there is a maximum of - only 48kB network RAM for this card. My thanks to Torbjorn Lindh for - help debugging all this (and holding my feet to the fire until I got it - right). - - The DE200 series boards have on-board 64kB RAM for use as a shared - memory network buffer. Only the DE100 cards make use of a 2kB buffer - mode which has not been implemented in this driver (only the 32kB and - 64kB modes are supported [16kB/48kB for the original DEPCA]). - - At the most only 2 DEPCA cards can be supported on the ISA bus because - there is only provision for two I/O base addresses on each card (0x300 - and 0x200). The I/O address is detected by searching for a byte sequence - in the Ethernet station address PROM at the expected I/O address for the - Ethernet PROM. The shared memory base address is 'autoprobed' by - looking for the self test PROM and detecting the card name. When a - second DEPCA is detected, information is placed in the base_addr - variable of the next device structure (which is created if necessary), - thus enabling ethif_probe initialization for the device. More than 2 - EISA cards can be supported, but care will be needed assigning the - shared memory to ensure that each slot has the correct IRQ, I/O address - and shared memory address assigned. - - ************************************************************************ - - NOTE: If you are using two ISA DEPCAs, it is important that you assign - the base memory addresses correctly. The driver autoprobes I/O 0x300 - then 0x200. The base memory address for the first device must be less - than that of the second so that the auto probe will correctly assign the - I/O and memory addresses on the same card. I can't think of a way to do - this unambiguously at the moment, since there is nothing on the cards to - tie I/O and memory information together. - - I am unable to test 2 cards together for now, so this code is - unchecked. All reports, good or bad, are welcome. - - ************************************************************************ - - The board IRQ setting must be at an unused IRQ which is auto-probed - using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are - {2,3,4,5,7}, whereas the DE200 is at {5,9,10,11,15}. Note that IRQ2 is - really IRQ9 in machines with 16 IRQ lines. - - No 16MB memory limitation should exist with this driver as DMA is not - used and the common memory area is in low memory on the network card (my - current system has 20MB and I've not had problems yet). - - The ability to load this driver as a loadable module has been added. To - utilise this ability, you have to do <8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy depca.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) if you wish, edit the source code near line 1530 to reflect the I/O - address and IRQ you're using (see also 5). - 3) compile depca.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the depca configuration turned off and reboot. - 5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100] - [Alan Cox: Changed the code to allow command line irq/io assignments] - [Dave Davies: Changed the code to allow command line mem/name - assignments] - 6) run the net startup bits for your eth?? interface manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - Note that autoprobing is not allowed in loadable modules - the system is - already up and running and you're messing with interrupts. - - To unload a module, turn off the associated interface - 'ifconfig eth?? down' then 'rmmod depca'. - - To assign a base memory address for the shared memory when running as a - loadable module, see 5 above. To include the adapter name (if you have - no PROM but know the card name) also see 5 above. Note that this last - option will not work with kernel built-in depca's. - - The shared memory assignment for a loadable module makes sense to avoid - the 'memory autoprobe' picking the wrong shared memory (for the case of - 2 depca's in a PC). - - ************************************************************************ - Support for MCA EtherWORKS cards added 11-3-98. (MCA since deleted) - Verified to work with up to 2 DE212 cards in a system (although not - fully stress-tested). - - Revision History - ---------------- - - Version Date Description - - 0.1 25-jan-94 Initial writing. - 0.2 27-jan-94 Added LANCE TX hardware buffer chaining. - 0.3 1-feb-94 Added multiple DEPCA support. - 0.31 4-feb-94 Added DE202 recognition. - 0.32 19-feb-94 Tidy up. Improve multi-DEPCA support. - 0.33 25-feb-94 Fix DEPCA ethernet ROM counter enable. - Add jabber packet fix from murf@perftech.com - and becker@super.org - 0.34 7-mar-94 Fix DEPCA max network memory RAM & NICSR access. - 0.35 8-mar-94 Added DE201 recognition. Tidied up. - 0.351 30-apr-94 Added EISA support. Added DE422 recognition. - 0.36 16-may-94 DE422 fix released. - 0.37 22-jul-94 Added MODULE support - 0.38 15-aug-94 Added DBR ROM switch in depca_close(). - Multi DEPCA bug fix. - 0.38axp 15-sep-94 Special version for Alpha AXP Linux V1.0. - 0.381 12-dec-94 Added DE101 recognition, fix multicast bug. - 0.382 9-feb-95 Fix recognition bug reported by . - 0.383 22-feb-95 Fix for conflict with VESA SCSI reported by - - 0.384 17-mar-95 Fix a ring full bug reported by - 0.385 3-apr-95 Fix a recognition bug reported by - - 0.386 21-apr-95 Fix the last fix...sorry, must be galloping senility - 0.40 25-May-95 Rewrite for portability & updated. - ALPHA support from - 0.41 26-Jun-95 Added verify_area() calls in depca_ioctl() from - suggestion by - 0.42 27-Dec-95 Add 'mem' shared memory assignment for loadable - modules. - Add 'adapter_name' for loadable modules when no PROM. - Both above from a suggestion by - . - Add new multicasting code. - 0.421 22-Apr-96 Fix alloc_device() bug - 0.422 29-Apr-96 Fix depca_hw_init() bug - 0.423 7-Jun-96 Fix module load bug - 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c - 0.44 1-Sep-97 Fix *_probe() to test check_region() first - bug - reported by - 0.45 3-Nov-98 Added support for MCA EtherWORKS (DE210/DE212) cards - by - 0.451 5-Nov-98 Fixed mca stuff cuz I'm a dummy. - 0.5 14-Nov-98 Re-spin for 2.1.x kernels. - 0.51 27-Jun-99 Correct received packet length for CRC from - report by - 0.52 16-Oct-00 Fixes for 2.3 io memory accesses - Fix show-stopper (ints left masked) in depca_interrupt - by - 0.53 12-Jan-01 Release resources on failure, bss tidbits - by acme@conectiva.com.br - 0.54 08-Nov-01 use library crc32 functions - by Matt_Domsch@dell.com - 0.55 01-Mar-03 Use EISA/sysfs framework - - ========================================================================= -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#ifdef CONFIG_EISA -#include -#endif - -#include "depca.h" - -static char version[] __initdata = "depca.c:v0.53 2001/1/12 davies@maniac.ultranet.com\n"; - -#ifdef DEPCA_DEBUG -static int depca_debug = DEPCA_DEBUG; -#else -static int depca_debug = 1; -#endif - -#define DEPCA_NDA 0xffe0 /* No Device Address */ - -#define TX_TIMEOUT (1*HZ) - -/* -** Ethernet PROM defines -*/ -#define PROBE_LENGTH 32 -#define ETH_PROM_SIG 0xAA5500FFUL - -/* -** Set the number of Tx and Rx buffers. Ensure that the memory requested -** here is <= to the amount of shared memory set up by the board switches. -** The number of descriptors MUST BE A POWER OF 2. -** -** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ) -*/ -#define NUM_RX_DESC 8 /* Number of RX descriptors */ -#define NUM_TX_DESC 8 /* Number of TX descriptors */ -#define RX_BUFF_SZ 1536 /* Buffer size for each Rx buffer */ -#define TX_BUFF_SZ 1536 /* Buffer size for each Tx buffer */ - -/* -** EISA bus defines -*/ -#define DEPCA_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ - -/* -** ISA Bus defines -*/ -#define DEPCA_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0xe0000,0x00000} -#define DEPCA_TOTAL_SIZE 0x10 - -static struct { - u_long iobase; - struct platform_device *device; -} depca_io_ports[] = { - { 0x300, NULL }, - { 0x200, NULL }, - { 0 , NULL }, -}; - -/* -** Name <-> Adapter mapping -*/ -#define DEPCA_SIGNATURE {"DEPCA",\ - "DE100","DE101",\ - "DE200","DE201","DE202",\ - "DE210","DE212",\ - "DE422",\ - ""} - -static char* __initdata depca_signature[] = DEPCA_SIGNATURE; - -enum depca_type { - DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown -}; - -static char depca_string[] = "depca"; - -static int depca_device_remove (struct device *device); - -#ifdef CONFIG_EISA -static struct eisa_device_id depca_eisa_ids[] = { - { "DEC4220", de422 }, - { "" } -}; -MODULE_DEVICE_TABLE(eisa, depca_eisa_ids); - -static int depca_eisa_probe (struct device *device); - -static struct eisa_driver depca_eisa_driver = { - .id_table = depca_eisa_ids, - .driver = { - .name = depca_string, - .probe = depca_eisa_probe, - .remove = depca_device_remove - } -}; -#endif - -static int depca_isa_probe (struct platform_device *); - -static int depca_isa_remove(struct platform_device *pdev) -{ - return depca_device_remove(&pdev->dev); -} - -static struct platform_driver depca_isa_driver = { - .probe = depca_isa_probe, - .remove = depca_isa_remove, - .driver = { - .name = depca_string, - }, -}; - -/* -** Miscellaneous info... -*/ -#define DEPCA_STRLEN 16 - -/* -** Memory Alignment. Each descriptor is 4 longwords long. To force a -** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and -** DESC_ALIGN. DEPCA_ALIGN aligns the start address of the private memory area -** and hence the RX descriptor ring's first entry. -*/ -#define DEPCA_ALIGN4 ((u_long)4 - 1) /* 1 longword align */ -#define DEPCA_ALIGN8 ((u_long)8 - 1) /* 2 longword (quadword) align */ -#define DEPCA_ALIGN DEPCA_ALIGN8 /* Keep the LANCE happy... */ - -/* -** The DEPCA Rx and Tx ring descriptors. -*/ -struct depca_rx_desc { - volatile s32 base; - s16 buf_length; /* This length is negative 2's complement! */ - s16 msg_length; /* This length is "normal". */ -}; - -struct depca_tx_desc { - volatile s32 base; - s16 length; /* This length is negative 2's complement! */ - s16 misc; /* Errors and TDR info */ -}; - -#define LA_MASK 0x0000ffff /* LANCE address mask for mapping network RAM - to LANCE memory address space */ - -/* -** The Lance initialization block, described in databook, in common memory. -*/ -struct depca_init { - u16 mode; /* Mode register */ - u8 phys_addr[ETH_ALEN]; /* Physical ethernet address */ - u8 mcast_table[8]; /* Multicast Hash Table. */ - u32 rx_ring; /* Rx ring base pointer & ring length */ - u32 tx_ring; /* Tx ring base pointer & ring length */ -}; - -#define DEPCA_PKT_STAT_SZ 16 -#define DEPCA_PKT_BIN_SZ 128 /* Should be >=100 unless you - increase DEPCA_PKT_STAT_SZ */ -struct depca_private { - char adapter_name[DEPCA_STRLEN]; /* /proc/ioports string */ - enum depca_type adapter; /* Adapter type */ - enum { - DEPCA_BUS_ISA = 1, - DEPCA_BUS_EISA, - } depca_bus; /* type of bus */ - struct depca_init init_block; /* Shadow Initialization block */ -/* CPU address space fields */ - struct depca_rx_desc __iomem *rx_ring; /* Pointer to start of RX descriptor ring */ - struct depca_tx_desc __iomem *tx_ring; /* Pointer to start of TX descriptor ring */ - void __iomem *rx_buff[NUM_RX_DESC]; /* CPU virt address of sh'd memory buffs */ - void __iomem *tx_buff[NUM_TX_DESC]; /* CPU virt address of sh'd memory buffs */ - void __iomem *sh_mem; /* CPU mapped virt address of device RAM */ - u_long mem_start; /* Bus address of device RAM (before remap) */ - u_long mem_len; /* device memory size */ -/* Device address space fields */ - u_long device_ram_start; /* Start of RAM in device addr space */ -/* Offsets used in both address spaces */ - u_long rx_ring_offset; /* Offset from start of RAM to rx_ring */ - u_long tx_ring_offset; /* Offset from start of RAM to tx_ring */ - u_long buffs_offset; /* LANCE Rx and Tx buffers start address. */ -/* Kernel-only (not device) fields */ - int rx_new, tx_new; /* The next free ring entry */ - int rx_old, tx_old; /* The ring entries to be free()ed. */ - spinlock_t lock; - struct { /* Private stats counters */ - u32 bins[DEPCA_PKT_STAT_SZ]; - u32 unicast; - u32 multicast; - u32 broadcast; - u32 excessive_collisions; - u32 tx_underruns; - u32 excessive_underruns; - } pktStats; - int txRingMask; /* TX ring mask */ - int rxRingMask; /* RX ring mask */ - s32 rx_rlen; /* log2(rxRingMask+1) for the descriptors */ - s32 tx_rlen; /* log2(txRingMask+1) for the descriptors */ -}; - -/* -** The transmit ring full condition is described by the tx_old and tx_new -** pointers by: -** tx_old = tx_new Empty ring -** tx_old = tx_new+1 Full ring -** tx_old+txRingMask = tx_new Full ring (wrapped condition) -*/ -#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\ - lp->tx_old+lp->txRingMask-lp->tx_new:\ - lp->tx_old -lp->tx_new-1) - -/* -** Public Functions -*/ -static int depca_open(struct net_device *dev); -static netdev_tx_t depca_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t depca_interrupt(int irq, void *dev_id); -static int depca_close(struct net_device *dev); -static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void depca_tx_timeout(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* -** Private functions -*/ -static void depca_init_ring(struct net_device *dev); -static int depca_rx(struct net_device *dev); -static int depca_tx(struct net_device *dev); - -static void LoadCSRs(struct net_device *dev); -static int InitRestartDepca(struct net_device *dev); -static int DepcaSignature(char *name, u_long paddr); -static int DevicePresent(u_long ioaddr); -static int get_hw_addr(struct net_device *dev); -static void SetMulticastFilter(struct net_device *dev); -static int load_packet(struct net_device *dev, struct sk_buff *skb); -static void depca_dbg_open(struct net_device *dev); - -static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 }; -static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 }; -static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 }; -static u_char *depca_irq; - -static int irq; -static int io; -static char *adapter_name; -static int mem; /* For loadable module assignment - use insmod mem=0x????? .... */ -module_param (irq, int, 0); -module_param (io, int, 0); -module_param (adapter_name, charp, 0); -module_param (mem, int, 0); -MODULE_PARM_DESC(irq, "DEPCA IRQ number"); -MODULE_PARM_DESC(io, "DEPCA I/O base address"); -MODULE_PARM_DESC(adapter_name, "DEPCA adapter name"); -MODULE_PARM_DESC(mem, "DEPCA shared memory address"); -MODULE_LICENSE("GPL"); - -/* -** Miscellaneous defines... -*/ -#define STOP_DEPCA \ - outw(CSR0, DEPCA_ADDR);\ - outw(STOP, DEPCA_DATA) - -static const struct net_device_ops depca_netdev_ops = { - .ndo_open = depca_open, - .ndo_start_xmit = depca_start_xmit, - .ndo_stop = depca_close, - .ndo_set_rx_mode = set_multicast_list, - .ndo_do_ioctl = depca_ioctl, - .ndo_tx_timeout = depca_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init depca_hw_init (struct net_device *dev, struct device *device) -{ - struct depca_private *lp; - int i, j, offset, netRAM, mem_len, status = 0; - s16 nicsr; - u_long ioaddr; - u_long mem_start; - - /* - * We are now supposed to enter this function with the - * following fields filled with proper values : - * - * dev->base_addr - * lp->mem_start - * lp->depca_bus - * lp->adapter - * - * dev->irq can be set if known from device configuration (on - * MCA or EISA) or module option. Otherwise, it will be auto - * detected. - */ - - ioaddr = dev->base_addr; - - STOP_DEPCA; - - nicsr = inb(DEPCA_NICSR); - nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM); - outb(nicsr, DEPCA_NICSR); - - if (inw(DEPCA_DATA) != STOP) { - return -ENXIO; - } - - lp = netdev_priv(dev); - mem_start = lp->mem_start; - - if (!mem_start || lp->adapter < DEPCA || lp->adapter >=unknown) - return -ENXIO; - - printk("%s: %s at 0x%04lx", - dev_name(device), depca_signature[lp->adapter], ioaddr); - - switch (lp->depca_bus) { -#ifdef CONFIG_EISA - case DEPCA_BUS_EISA: - printk(" (EISA slot %d)", to_eisa_device(device)->slot); - break; -#endif - - case DEPCA_BUS_ISA: - break; - - default: - printk("Unknown DEPCA bus %d\n", lp->depca_bus); - return -ENXIO; - } - - printk(", h/w address "); - status = get_hw_addr(dev); - printk("%pM", dev->dev_addr); - if (status != 0) { - printk(" which has an Ethernet PROM CRC error.\n"); - return -ENXIO; - } - - /* Set up the maximum amount of network RAM(kB) */ - netRAM = ((lp->adapter != DEPCA) ? 64 : 48); - if ((nicsr & _128KB) && (lp->adapter == de422)) - netRAM = 128; - - /* Shared Memory Base Address */ - if (nicsr & BUF) { - nicsr &= ~BS; /* DEPCA RAM in top 32k */ - netRAM -= 32; - mem_start += 0x8000; - } - - if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init))) - > (netRAM << 10)) { - printk(",\n requests %dkB RAM: only %dkB is available!\n", (mem_len >> 10), netRAM); - return -ENXIO; - } - - printk(",\n has %dkB RAM at 0x%.5lx", netRAM, mem_start); - - /* Enable the shadow RAM. */ - if (lp->adapter != DEPCA) { - nicsr |= SHE; - outb(nicsr, DEPCA_NICSR); - } - - spin_lock_init(&lp->lock); - sprintf(lp->adapter_name, "%s (%s)", - depca_signature[lp->adapter], dev_name(device)); - status = -EBUSY; - - /* Initialisation Block */ - if (!request_mem_region (mem_start, mem_len, lp->adapter_name)) { - printk(KERN_ERR "depca: cannot request ISA memory, aborting\n"); - goto out_priv; - } - - status = -EIO; - lp->sh_mem = ioremap(mem_start, mem_len); - if (lp->sh_mem == NULL) { - printk(KERN_ERR "depca: cannot remap ISA memory, aborting\n"); - goto out1; - } - - lp->mem_start = mem_start; - lp->mem_len = mem_len; - lp->device_ram_start = mem_start & LA_MASK; - - offset = 0; - offset += sizeof(struct depca_init); - - /* Tx & Rx descriptors (aligned to a quadword boundary) */ - offset = (offset + DEPCA_ALIGN) & ~DEPCA_ALIGN; - lp->rx_ring = lp->sh_mem + offset; - lp->rx_ring_offset = offset; - - offset += (sizeof(struct depca_rx_desc) * NUM_RX_DESC); - lp->tx_ring = lp->sh_mem + offset; - lp->tx_ring_offset = offset; - - offset += (sizeof(struct depca_tx_desc) * NUM_TX_DESC); - - lp->buffs_offset = offset; - - /* Finish initialising the ring information. */ - lp->rxRingMask = NUM_RX_DESC - 1; - lp->txRingMask = NUM_TX_DESC - 1; - - /* Calculate Tx/Rx RLEN size for the descriptors. */ - for (i = 0, j = lp->rxRingMask; j > 0; i++) { - j >>= 1; - } - lp->rx_rlen = (s32) (i << 29); - for (i = 0, j = lp->txRingMask; j > 0; i++) { - j >>= 1; - } - lp->tx_rlen = (s32) (i << 29); - - /* Load the initialisation block */ - depca_init_ring(dev); - - /* Initialise the control and status registers */ - LoadCSRs(dev); - - /* Enable DEPCA board interrupts for autoprobing */ - nicsr = ((nicsr & ~IM) | IEN); - outb(nicsr, DEPCA_NICSR); - - /* To auto-IRQ we enable the initialization-done and DMA err, - interrupts. For now we will always get a DMA error. */ - if (dev->irq < 2) { - unsigned char irqnum; - unsigned long irq_mask, delay; - - irq_mask = probe_irq_on(); - - /* Assign the correct irq list */ - switch (lp->adapter) { - case DEPCA: - case de100: - case de101: - depca_irq = de1xx_irq; - break; - case de200: - case de201: - case de202: - case de210: - case de212: - depca_irq = de2xx_irq; - break; - case de422: - depca_irq = de422_irq; - break; - - default: - break; /* Not reached */ - } - - /* Trigger an initialization just for the interrupt. */ - outw(INEA | INIT, DEPCA_DATA); - - delay = jiffies + HZ/50; - while (time_before(jiffies, delay)) - yield(); - - irqnum = probe_irq_off(irq_mask); - - status = -ENXIO; - if (!irqnum) { - printk(" and failed to detect IRQ line.\n"); - goto out2; - } else { - for (dev->irq = 0, i = 0; (depca_irq[i]) && (!dev->irq); i++) - if (irqnum == depca_irq[i]) { - dev->irq = irqnum; - printk(" and uses IRQ%d.\n", dev->irq); - } - - if (!dev->irq) { - printk(" but incorrect IRQ line detected.\n"); - goto out2; - } - } - } else { - printk(" and assigned IRQ%d.\n", dev->irq); - } - - if (depca_debug > 1) { - printk(version); - } - - /* The DEPCA-specific entries in the device structure. */ - dev->netdev_ops = &depca_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - dev->mem_start = 0; - - dev_set_drvdata(device, dev); - SET_NETDEV_DEV (dev, device); - - status = register_netdev(dev); - if (status == 0) - return 0; -out2: - iounmap(lp->sh_mem); -out1: - release_mem_region (mem_start, mem_len); -out_priv: - return status; -} - - -static int depca_open(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - s16 nicsr; - int status = 0; - - STOP_DEPCA; - nicsr = inb(DEPCA_NICSR); - - /* Make sure the shadow RAM is enabled */ - if (lp->adapter != DEPCA) { - nicsr |= SHE; - outb(nicsr, DEPCA_NICSR); - } - - /* Re-initialize the DEPCA... */ - depca_init_ring(dev); - LoadCSRs(dev); - - depca_dbg_open(dev); - - if (request_irq(dev->irq, depca_interrupt, 0, lp->adapter_name, dev)) { - printk("depca_open(): Requested IRQ%d is busy\n", dev->irq); - status = -EAGAIN; - } else { - - /* Enable DEPCA board interrupts and turn off LED */ - nicsr = ((nicsr & ~IM & ~LED) | IEN); - outb(nicsr, DEPCA_NICSR); - outw(CSR0, DEPCA_ADDR); - - netif_start_queue(dev); - - status = InitRestartDepca(dev); - - if (depca_debug > 1) { - printk("CSR0: 0x%4.4x\n", inw(DEPCA_DATA)); - printk("nicsr: 0x%02x\n", inb(DEPCA_NICSR)); - } - } - return status; -} - -/* Initialize the lance Rx and Tx descriptor rings. */ -static void depca_init_ring(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_int i; - u_long offset; - - /* Lock out other processes whilst setting up the hardware */ - netif_stop_queue(dev); - - lp->rx_new = lp->tx_new = 0; - lp->rx_old = lp->tx_old = 0; - - /* Initialize the base address and length of each buffer in the ring */ - for (i = 0; i <= lp->rxRingMask; i++) { - offset = lp->buffs_offset + i * RX_BUFF_SZ; - writel((lp->device_ram_start + offset) | R_OWN, &lp->rx_ring[i].base); - writew(-RX_BUFF_SZ, &lp->rx_ring[i].buf_length); - lp->rx_buff[i] = lp->sh_mem + offset; - } - - for (i = 0; i <= lp->txRingMask; i++) { - offset = lp->buffs_offset + (i + lp->rxRingMask + 1) * TX_BUFF_SZ; - writel((lp->device_ram_start + offset) & 0x00ffffff, &lp->tx_ring[i].base); - lp->tx_buff[i] = lp->sh_mem + offset; - } - - /* Set up the initialization block */ - lp->init_block.rx_ring = (lp->device_ram_start + lp->rx_ring_offset) | lp->rx_rlen; - lp->init_block.tx_ring = (lp->device_ram_start + lp->tx_ring_offset) | lp->tx_rlen; - - SetMulticastFilter(dev); - - for (i = 0; i < ETH_ALEN; i++) { - lp->init_block.phys_addr[i] = dev->dev_addr[i]; - } - - lp->init_block.mode = 0x0000; /* Enable the Tx and Rx */ -} - - -static void depca_tx_timeout(struct net_device *dev) -{ - u_long ioaddr = dev->base_addr; - - printk("%s: transmit timed out, status %04x, resetting.\n", dev->name, inw(DEPCA_DATA)); - - STOP_DEPCA; - depca_init_ring(dev); - LoadCSRs(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); - InitRestartDepca(dev); -} - - -/* -** Writes a socket buffer to TX descriptor ring and starts transmission -*/ -static netdev_tx_t depca_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - int status = 0; - - /* Transmitter timeout, serious problems. */ - if (skb->len < 1) - goto out; - - if (skb_padto(skb, ETH_ZLEN)) - goto out; - - netif_stop_queue(dev); - - if (TX_BUFFS_AVAIL) { /* Fill in a Tx ring entry */ - status = load_packet(dev, skb); - - if (!status) { - /* Trigger an immediate send demand. */ - outw(CSR0, DEPCA_ADDR); - outw(INEA | TDMD, DEPCA_DATA); - - dev_kfree_skb(skb); - } - if (TX_BUFFS_AVAIL) - netif_start_queue(dev); - } else - status = NETDEV_TX_LOCKED; - - out: - return status; -} - -/* -** The DEPCA interrupt handler. -*/ -static irqreturn_t depca_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct depca_private *lp; - s16 csr0, nicsr; - u_long ioaddr; - - if (dev == NULL) { - printk("depca_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - lp = netdev_priv(dev); - ioaddr = dev->base_addr; - - spin_lock(&lp->lock); - - /* mask the DEPCA board interrupts and turn on the LED */ - nicsr = inb(DEPCA_NICSR); - nicsr |= (IM | LED); - outb(nicsr, DEPCA_NICSR); - - outw(CSR0, DEPCA_ADDR); - csr0 = inw(DEPCA_DATA); - - /* Acknowledge all of the current interrupt sources ASAP. */ - outw(csr0 & INTE, DEPCA_DATA); - - if (csr0 & RINT) /* Rx interrupt (packet arrived) */ - depca_rx(dev); - - if (csr0 & TINT) /* Tx interrupt (packet sent) */ - depca_tx(dev); - - /* Any resources available? */ - if ((TX_BUFFS_AVAIL >= 0) && netif_queue_stopped(dev)) { - netif_wake_queue(dev); - } - - /* Unmask the DEPCA board interrupts and turn off the LED */ - nicsr = (nicsr & ~IM & ~LED); - outb(nicsr, DEPCA_NICSR); - - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -/* Called with lp->lock held */ -static int depca_rx(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - int i, entry; - s32 status; - - for (entry = lp->rx_new; !(readl(&lp->rx_ring[entry].base) & R_OWN); entry = lp->rx_new) { - status = readl(&lp->rx_ring[entry].base) >> 16; - if (status & R_STP) { /* Remember start of frame */ - lp->rx_old = entry; - } - if (status & R_ENP) { /* Valid frame status */ - if (status & R_ERR) { /* There was an error. */ - dev->stats.rx_errors++; /* Update the error stats. */ - if (status & R_FRAM) - dev->stats.rx_frame_errors++; - if (status & R_OFLO) - dev->stats.rx_over_errors++; - if (status & R_CRC) - dev->stats.rx_crc_errors++; - if (status & R_BUFF) - dev->stats.rx_fifo_errors++; - } else { - short len, pkt_len = readw(&lp->rx_ring[entry].msg_length) - 4; - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len + 2); - if (skb != NULL) { - unsigned char *buf; - skb_reserve(skb, 2); /* 16 byte align the IP header */ - buf = skb_put(skb, pkt_len); - if (entry < lp->rx_old) { /* Wrapped buffer */ - len = (lp->rxRingMask - lp->rx_old + 1) * RX_BUFF_SZ; - memcpy_fromio(buf, lp->rx_buff[lp->rx_old], len); - memcpy_fromio(buf + len, lp->rx_buff[0], pkt_len - len); - } else { /* Linear buffer */ - memcpy_fromio(buf, lp->rx_buff[lp->rx_old], pkt_len); - } - - /* - ** Notify the upper protocol layers that there is another - ** packet to handle - */ - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - - /* - ** Update stats - */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - for (i = 1; i < DEPCA_PKT_STAT_SZ - 1; i++) { - if (pkt_len < (i * DEPCA_PKT_BIN_SZ)) { - lp->pktStats.bins[i]++; - i = DEPCA_PKT_STAT_SZ; - } - } - if (is_multicast_ether_addr(buf)) { - if (is_broadcast_ether_addr(buf)) { - lp->pktStats.broadcast++; - } else { - lp->pktStats.multicast++; - } - } else if (ether_addr_equal(buf, - dev->dev_addr)) { - lp->pktStats.unicast++; - } - - lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ - if (lp->pktStats.bins[0] == 0) { /* Reset counters */ - memset((char *) &lp->pktStats, 0, sizeof(lp->pktStats)); - } - } else { - printk("%s: Memory squeeze, deferring packet.\n", dev->name); - dev->stats.rx_dropped++; /* Really, deferred. */ - break; - } - } - /* Change buffer ownership for this last frame, back to the adapter */ - for (; lp->rx_old != entry; lp->rx_old = (lp->rx_old + 1) & lp->rxRingMask) { - writel(readl(&lp->rx_ring[lp->rx_old].base) | R_OWN, &lp->rx_ring[lp->rx_old].base); - } - writel(readl(&lp->rx_ring[entry].base) | R_OWN, &lp->rx_ring[entry].base); - } - - /* - ** Update entry information - */ - lp->rx_new = (lp->rx_new + 1) & lp->rxRingMask; - } - - return 0; -} - -/* -** Buffer sent - check for buffer errors. -** Called with lp->lock held -*/ -static int depca_tx(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - int entry; - s32 status; - u_long ioaddr = dev->base_addr; - - for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) { - status = readl(&lp->tx_ring[entry].base) >> 16; - - if (status < 0) { /* Packet not yet sent! */ - break; - } else if (status & T_ERR) { /* An error occurred. */ - status = readl(&lp->tx_ring[entry].misc); - dev->stats.tx_errors++; - if (status & TMD3_RTRY) - dev->stats.tx_aborted_errors++; - if (status & TMD3_LCAR) - dev->stats.tx_carrier_errors++; - if (status & TMD3_LCOL) - dev->stats.tx_window_errors++; - if (status & TMD3_UFLO) - dev->stats.tx_fifo_errors++; - if (status & (TMD3_BUFF | TMD3_UFLO)) { - /* Trigger an immediate send demand. */ - outw(CSR0, DEPCA_ADDR); - outw(INEA | TDMD, DEPCA_DATA); - } - } else if (status & (T_MORE | T_ONE)) { - dev->stats.collisions++; - } else { - dev->stats.tx_packets++; - } - - /* Update all the pointers */ - lp->tx_old = (lp->tx_old + 1) & lp->txRingMask; - } - - return 0; -} - -static int depca_close(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - s16 nicsr; - u_long ioaddr = dev->base_addr; - - netif_stop_queue(dev); - - outw(CSR0, DEPCA_ADDR); - - if (depca_debug > 1) { - printk("%s: Shutting down ethercard, status was %2.2x.\n", dev->name, inw(DEPCA_DATA)); - } - - /* - ** We stop the DEPCA here -- it occasionally polls - ** memory if we don't. - */ - outw(STOP, DEPCA_DATA); - - /* - ** Give back the ROM in case the user wants to go to DOS - */ - if (lp->adapter != DEPCA) { - nicsr = inb(DEPCA_NICSR); - nicsr &= ~SHE; - outb(nicsr, DEPCA_NICSR); - } - - /* - ** Free the associated irq - */ - free_irq(dev->irq, dev); - return 0; -} - -static void LoadCSRs(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - - outw(CSR1, DEPCA_ADDR); /* initialisation block address LSW */ - outw((u16) lp->device_ram_start, DEPCA_DATA); - outw(CSR2, DEPCA_ADDR); /* initialisation block address MSW */ - outw((u16) (lp->device_ram_start >> 16), DEPCA_DATA); - outw(CSR3, DEPCA_ADDR); /* ALE control */ - outw(ACON, DEPCA_DATA); - - outw(CSR0, DEPCA_ADDR); /* Point back to CSR0 */ -} - -static int InitRestartDepca(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - int i, status = 0; - - /* Copy the shadow init_block to shared memory */ - memcpy_toio(lp->sh_mem, &lp->init_block, sizeof(struct depca_init)); - - outw(CSR0, DEPCA_ADDR); /* point back to CSR0 */ - outw(INIT, DEPCA_DATA); /* initialize DEPCA */ - - /* wait for lance to complete initialisation */ - for (i = 0; (i < 100) && !(inw(DEPCA_DATA) & IDON); i++); - - if (i != 100) { - /* clear IDON by writing a "1", enable interrupts and start lance */ - outw(IDON | INEA | STRT, DEPCA_DATA); - if (depca_debug > 2) { - printk("%s: DEPCA open after %d ticks, init block 0x%08lx csr0 %4.4x.\n", dev->name, i, lp->mem_start, inw(DEPCA_DATA)); - } - } else { - printk("%s: DEPCA unopen after %d ticks, init block 0x%08lx csr0 %4.4x.\n", dev->name, i, lp->mem_start, inw(DEPCA_DATA)); - status = -1; - } - - return status; -} - -/* -** Set or clear the multicast filter for this adaptor. -*/ -static void set_multicast_list(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous mode */ - lp->init_block.mode |= PROM; - } else { - SetMulticastFilter(dev); - lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */ - } - - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ -} - -/* -** Calculate the hash code and update the logical address filter -** from a list of ethernet multicast addresses. -** Big endian crc one liner is mine, all mine, ha ha ha ha! -** LANCE calculates its hash codes big endian. -*/ -static void SetMulticastFilter(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - struct netdev_hw_addr *ha; - int i, j, bit, byte; - u16 hashcode; - u32 crc; - - if (dev->flags & IFF_ALLMULTI) { /* Set all multicast bits */ - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { - lp->init_block.mcast_table[i] = (char) 0xff; - } - } else { - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { /* Clear the multicast table */ - lp->init_block.mcast_table[i] = 0; - } - /* Add multicast addresses */ - netdev_for_each_mc_addr(ha, dev) { - crc = ether_crc(ETH_ALEN, ha->addr); - hashcode = (crc & 1); /* hashcode is 6 LSb of CRC ... */ - for (j = 0; j < 5; j++) { /* ... in reverse order. */ - hashcode = (hashcode << 1) | ((crc >>= 1) & 1); - } - - byte = hashcode >> 3; /* bit[3-5] -> byte in filter */ - bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */ - lp->init_block.mcast_table[byte] |= bit; - } - } -} - -static int __init depca_common_init (u_long ioaddr, struct net_device **devp) -{ - int status = 0; - - if (!request_region (ioaddr, DEPCA_TOTAL_SIZE, depca_string)) { - status = -EBUSY; - goto out; - } - - if (DevicePresent(ioaddr)) { - status = -ENODEV; - goto out_release; - } - - if (!(*devp = alloc_etherdev (sizeof (struct depca_private)))) { - status = -ENOMEM; - goto out_release; - } - - return 0; - - out_release: - release_region (ioaddr, DEPCA_TOTAL_SIZE); - out: - return status; -} - -/* -** ISA bus I/O device probe -*/ - -static void __init depca_platform_probe (void) -{ - int i; - struct platform_device *pldev; - - for (i = 0; depca_io_ports[i].iobase; i++) { - depca_io_ports[i].device = NULL; - - /* if an address has been specified on the command - * line, use it (if valid) */ - if (io && io != depca_io_ports[i].iobase) - continue; - - pldev = platform_device_alloc(depca_string, i); - if (!pldev) - continue; - - pldev->dev.platform_data = (void *) depca_io_ports[i].iobase; - depca_io_ports[i].device = pldev; - - if (platform_device_add(pldev)) { - depca_io_ports[i].device = NULL; - pldev->dev.platform_data = NULL; - platform_device_put(pldev); - continue; - } - - if (!pldev->dev.driver) { - /* The driver was not bound to this device, there was - * no hardware at this address. Unregister it, as the - * release function will take care of freeing the - * allocated structure */ - - depca_io_ports[i].device = NULL; - pldev->dev.platform_data = NULL; - platform_device_unregister (pldev); - } - } -} - -static enum depca_type __init depca_shmem_probe (ulong *mem_start) -{ - u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES; - enum depca_type adapter = unknown; - int i; - - for (i = 0; mem_base[i]; i++) { - *mem_start = mem ? mem : mem_base[i]; - adapter = DepcaSignature (adapter_name, *mem_start); - if (adapter != unknown) - break; - } - - return adapter; -} - -static int depca_isa_probe(struct platform_device *device) -{ - struct net_device *dev; - struct depca_private *lp; - u_long ioaddr, mem_start = 0; - enum depca_type adapter = unknown; - int status = 0; - - ioaddr = (u_long) device->dev.platform_data; - - if ((status = depca_common_init (ioaddr, &dev))) - goto out; - - adapter = depca_shmem_probe (&mem_start); - - if (adapter == unknown) { - status = -ENODEV; - goto out_free; - } - - dev->base_addr = ioaddr; - dev->irq = irq; /* Use whatever value the user gave - * us, and 0 if he didn't. */ - lp = netdev_priv(dev); - lp->depca_bus = DEPCA_BUS_ISA; - lp->adapter = adapter; - lp->mem_start = mem_start; - - if ((status = depca_hw_init(dev, &device->dev))) - goto out_free; - - return 0; - - out_free: - free_netdev (dev); - release_region (ioaddr, DEPCA_TOTAL_SIZE); - out: - return status; -} - -/* -** EISA callbacks from sysfs. -*/ - -#ifdef CONFIG_EISA -static int __init depca_eisa_probe (struct device *device) -{ - enum depca_type adapter = unknown; - struct eisa_device *edev; - struct net_device *dev; - struct depca_private *lp; - u_long ioaddr, mem_start; - int status = 0; - - edev = to_eisa_device (device); - ioaddr = edev->base_addr + DEPCA_EISA_IO_PORTS; - - if ((status = depca_common_init (ioaddr, &dev))) - goto out; - - /* It would have been nice to get card configuration from the - * card. Unfortunately, this register is write-only (shares - * it's address with the ethernet prom)... As we don't parse - * the EISA configuration structures (yet... :-), just rely on - * the ISA probing to sort it out... */ - - adapter = depca_shmem_probe (&mem_start); - if (adapter == unknown) { - status = -ENODEV; - goto out_free; - } - - dev->base_addr = ioaddr; - dev->irq = irq; - lp = netdev_priv(dev); - lp->depca_bus = DEPCA_BUS_EISA; - lp->adapter = edev->id.driver_data; - lp->mem_start = mem_start; - - if ((status = depca_hw_init(dev, device))) - goto out_free; - - return 0; - - out_free: - free_netdev (dev); - release_region (ioaddr, DEPCA_TOTAL_SIZE); - out: - return status; -} -#endif - -static int depca_device_remove(struct device *device) -{ - struct net_device *dev; - struct depca_private *lp; - int bus; - - dev = dev_get_drvdata(device); - lp = netdev_priv(dev); - - unregister_netdev (dev); - iounmap (lp->sh_mem); - release_mem_region (lp->mem_start, lp->mem_len); - release_region (dev->base_addr, DEPCA_TOTAL_SIZE); - bus = lp->depca_bus; - free_netdev (dev); - - return 0; -} - -/* -** Look for a particular board name in the on-board Remote Diagnostics -** and Boot (readb) ROM. This will also give us a clue to the network RAM -** base address. -*/ -static int __init DepcaSignature(char *name, u_long base_addr) -{ - u_int i, j, k; - void __iomem *ptr; - char tmpstr[16]; - u_long prom_addr = base_addr + 0xc000; - u_long mem_addr = base_addr + 0x8000; /* 32KB */ - - /* Can't reserve the prom region, it is already marked as - * used, at least on x86. Instead, reserve a memory region a - * board would certainly use. If it works, go ahead. If not, - * run like hell... */ - - if (!request_mem_region (mem_addr, 16, depca_string)) - return unknown; - - /* Copy the first 16 bytes of ROM */ - - ptr = ioremap(prom_addr, 16); - if (ptr == NULL) { - printk(KERN_ERR "depca: I/O remap failed at %lx\n", prom_addr); - return unknown; - } - for (i = 0; i < 16; i++) { - tmpstr[i] = readb(ptr + i); - } - iounmap(ptr); - - release_mem_region (mem_addr, 16); - - /* Check if PROM contains a valid string */ - for (i = 0; *depca_signature[i] != '\0'; i++) { - for (j = 0, k = 0; j < 16 && k < strlen(depca_signature[i]); j++) { - if (depca_signature[i][k] == tmpstr[j]) { /* track signature */ - k++; - } else { /* lost signature; begin search again */ - k = 0; - } - } - if (k == strlen(depca_signature[i])) - break; - } - - /* Check if name string is valid, provided there's no PROM */ - if (name && *name && (i == unknown)) { - for (i = 0; *depca_signature[i] != '\0'; i++) { - if (strcmp(name, depca_signature[i]) == 0) - break; - } - } - - return i; -} - -/* -** Look for a special sequence in the Ethernet station address PROM that -** is common across all DEPCA products. Note that the original DEPCA needs -** its ROM address counter to be initialized and enabled. Only enable -** if the first address octet is a 0x08 - this minimises the chances of -** messing around with some other hardware, but it assumes that this DEPCA -** card initialized itself correctly. -** -** Search the Ethernet address ROM for the signature. Since the ROM address -** counter can start at an arbitrary point, the search must include the entire -** probe sequence length plus the (length_of_the_signature - 1). -** Stop the search IMMEDIATELY after the signature is found so that the -** PROM address counter is correctly positioned at the start of the -** ethernet address for later read out. -*/ -static int __init DevicePresent(u_long ioaddr) -{ - union { - struct { - u32 a; - u32 b; - } llsig; - char Sig[sizeof(u32) << 1]; - } - dev; - short sigLength = 0; - s8 data; - s16 nicsr; - int i, j, status = 0; - - data = inb(DEPCA_PROM); /* clear counter on DEPCA */ - data = inb(DEPCA_PROM); /* read data */ - - if (data == 0x08) { /* Enable counter on DEPCA */ - nicsr = inb(DEPCA_NICSR); - nicsr |= AAC; - outb(nicsr, DEPCA_NICSR); - } - - dev.llsig.a = ETH_PROM_SIG; - dev.llsig.b = ETH_PROM_SIG; - sigLength = sizeof(u32) << 1; - - for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) { - data = inb(DEPCA_PROM); - if (dev.Sig[j] == data) { /* track signature */ - j++; - } else { /* lost signature; begin search again */ - if (data == dev.Sig[0]) { /* rare case.... */ - j = 1; - } else { - j = 0; - } - } - } - - if (j != sigLength) { - status = -ENODEV; /* search failed */ - } - - return status; -} - -/* -** The DE100 and DE101 PROM accesses were made non-standard for some bizarre -** reason: access the upper half of the PROM with x=0; access the lower half -** with x=1. -*/ -static int __init get_hw_addr(struct net_device *dev) -{ - u_long ioaddr = dev->base_addr; - struct depca_private *lp = netdev_priv(dev); - int i, k, tmp, status = 0; - u_short j, x, chksum; - - x = (((lp->adapter == de100) || (lp->adapter == de101)) ? 1 : 0); - - for (i = 0, k = 0, j = 0; j < 3; j++) { - k <<= 1; - if (k > 0xffff) - k -= 0xffff; - - k += (u_char) (tmp = inb(DEPCA_PROM + x)); - dev->dev_addr[i++] = (u_char) tmp; - k += (u_short) ((tmp = inb(DEPCA_PROM + x)) << 8); - dev->dev_addr[i++] = (u_char) tmp; - - if (k > 0xffff) - k -= 0xffff; - } - if (k == 0xffff) - k = 0; - - chksum = (u_char) inb(DEPCA_PROM + x); - chksum |= (u_short) (inb(DEPCA_PROM + x) << 8); - if (k != chksum) - status = -1; - - return status; -} - -/* -** Load a packet into the shared memory -*/ -static int load_packet(struct net_device *dev, struct sk_buff *skb) -{ - struct depca_private *lp = netdev_priv(dev); - int i, entry, end, len, status = NETDEV_TX_OK; - - entry = lp->tx_new; /* Ring around buffer number. */ - end = (entry + (skb->len - 1) / TX_BUFF_SZ) & lp->txRingMask; - if (!(readl(&lp->tx_ring[end].base) & T_OWN)) { /* Enough room? */ - /* - ** Caution: the write order is important here... don't set up the - ** ownership rights until all the other information is in place. - */ - if (end < entry) { /* wrapped buffer */ - len = (lp->txRingMask - entry + 1) * TX_BUFF_SZ; - memcpy_toio(lp->tx_buff[entry], skb->data, len); - memcpy_toio(lp->tx_buff[0], skb->data + len, skb->len - len); - } else { /* linear buffer */ - memcpy_toio(lp->tx_buff[entry], skb->data, skb->len); - } - - /* set up the buffer descriptors */ - len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len; - for (i = entry; i != end; i = (i+1) & lp->txRingMask) { - /* clean out flags */ - writel(readl(&lp->tx_ring[i].base) & ~T_FLAGS, &lp->tx_ring[i].base); - writew(0x0000, &lp->tx_ring[i].misc); /* clears other error flags */ - writew(-TX_BUFF_SZ, &lp->tx_ring[i].length); /* packet length in buffer */ - len -= TX_BUFF_SZ; - } - /* clean out flags */ - writel(readl(&lp->tx_ring[end].base) & ~T_FLAGS, &lp->tx_ring[end].base); - writew(0x0000, &lp->tx_ring[end].misc); /* clears other error flags */ - writew(-len, &lp->tx_ring[end].length); /* packet length in last buff */ - - /* start of packet */ - writel(readl(&lp->tx_ring[entry].base) | T_STP, &lp->tx_ring[entry].base); - /* end of packet */ - writel(readl(&lp->tx_ring[end].base) | T_ENP, &lp->tx_ring[end].base); - - for (i = end; i != entry; --i) { - /* ownership of packet */ - writel(readl(&lp->tx_ring[i].base) | T_OWN, &lp->tx_ring[i].base); - if (i == 0) - i = lp->txRingMask + 1; - } - writel(readl(&lp->tx_ring[entry].base) | T_OWN, &lp->tx_ring[entry].base); - - lp->tx_new = (++end) & lp->txRingMask; /* update current pointers */ - } else { - status = NETDEV_TX_LOCKED; - } - - return status; -} - -static void depca_dbg_open(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - struct depca_init *p = &lp->init_block; - int i; - - if (depca_debug > 1) { - /* Do not copy the shadow init block into shared memory */ - /* Debugging should not affect normal operation! */ - /* The shadow init block will get copied across during InitRestartDepca */ - printk("%s: depca open with irq %d\n", dev->name, dev->irq); - printk("Descriptor head addresses (CPU):\n"); - printk(" 0x%lx 0x%lx\n", (u_long) lp->rx_ring, (u_long) lp->tx_ring); - printk("Descriptor addresses (CPU):\nRX: "); - for (i = 0; i < lp->rxRingMask; i++) { - if (i < 3) { - printk("%p ", &lp->rx_ring[i].base); - } - } - printk("...%p\n", &lp->rx_ring[i].base); - printk("TX: "); - for (i = 0; i < lp->txRingMask; i++) { - if (i < 3) { - printk("%p ", &lp->tx_ring[i].base); - } - } - printk("...%p\n", &lp->tx_ring[i].base); - printk("\nDescriptor buffers (Device):\nRX: "); - for (i = 0; i < lp->rxRingMask; i++) { - if (i < 3) { - printk("0x%8.8x ", readl(&lp->rx_ring[i].base)); - } - } - printk("...0x%8.8x\n", readl(&lp->rx_ring[i].base)); - printk("TX: "); - for (i = 0; i < lp->txRingMask; i++) { - if (i < 3) { - printk("0x%8.8x ", readl(&lp->tx_ring[i].base)); - } - } - printk("...0x%8.8x\n", readl(&lp->tx_ring[i].base)); - printk("Initialisation block at 0x%8.8lx(Phys)\n", lp->mem_start); - printk(" mode: 0x%4.4x\n", p->mode); - printk(" physical address: %pM\n", p->phys_addr); - printk(" multicast hash table: "); - for (i = 0; i < (HASH_TABLE_LEN >> 3) - 1; i++) { - printk("%2.2x:", p->mcast_table[i]); - } - printk("%2.2x\n", p->mcast_table[i]); - printk(" rx_ring at: 0x%8.8x\n", p->rx_ring); - printk(" tx_ring at: 0x%8.8x\n", p->tx_ring); - printk("buffers (Phys): 0x%8.8lx\n", lp->mem_start + lp->buffs_offset); - printk("Ring size:\nRX: %d Log2(rxRingMask): 0x%8.8x\n", (int) lp->rxRingMask + 1, lp->rx_rlen); - printk("TX: %d Log2(txRingMask): 0x%8.8x\n", (int) lp->txRingMask + 1, lp->tx_rlen); - outw(CSR2, DEPCA_ADDR); - printk("CSR2&1: 0x%4.4x", inw(DEPCA_DATA)); - outw(CSR1, DEPCA_ADDR); - printk("%4.4x\n", inw(DEPCA_DATA)); - outw(CSR3, DEPCA_ADDR); - printk("CSR3: 0x%4.4x\n", inw(DEPCA_DATA)); - } -} - -/* -** Perform IOCTL call functions here. Some are privileged operations and the -** effective uid is checked in those cases. -** All multicast IOCTLs will not work here and are for testing purposes only. -*/ -static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct depca_private *lp = netdev_priv(dev); - struct depca_ioctl *ioc = (struct depca_ioctl *) &rq->ifr_ifru; - int i, status = 0; - u_long ioaddr = dev->base_addr; - union { - u8 addr[(HASH_TABLE_LEN * ETH_ALEN)]; - u16 sval[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; - u32 lval[(HASH_TABLE_LEN * ETH_ALEN) >> 2]; - } tmp; - unsigned long flags; - void *buf; - - switch (ioc->cmd) { - case DEPCA_GET_HWADDR: /* Get the hardware address */ - for (i = 0; i < ETH_ALEN; i++) { - tmp.addr[i] = dev->dev_addr[i]; - } - ioc->len = ETH_ALEN; - if (copy_to_user(ioc->data, tmp.addr, ioc->len)) - return -EFAULT; - break; - - case DEPCA_SET_HWADDR: /* Set the hardware address */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) - return -EFAULT; - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = tmp.addr[i]; - } - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new) - cpu_relax(); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ - break; - - case DEPCA_SET_PROM: /* Set Promiscuous Mode */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new) - cpu_relax(); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - lp->init_block.mode |= PROM; /* Set promiscuous mode */ - - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ - break; - - case DEPCA_CLR_PROM: /* Clear Promiscuous Mode */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new) - cpu_relax(); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - lp->init_block.mode &= ~PROM; /* Clear promiscuous mode */ - - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ - break; - - case DEPCA_SAY_BOO: /* Say "Boo!" to the kernel log file */ - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - printk("%s: Boo!\n", dev->name); - break; - - case DEPCA_GET_MCA: /* Get the multicast address table */ - ioc->len = (HASH_TABLE_LEN >> 3); - if (copy_to_user(ioc->data, lp->init_block.mcast_table, ioc->len)) - return -EFAULT; - break; - - case DEPCA_SET_MCA: /* Set a multicast address */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (ioc->len >= HASH_TABLE_LEN) - return -EINVAL; - if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN * ioc->len)) - return -EFAULT; - set_multicast_list(dev); - break; - - case DEPCA_CLR_MCA: /* Clear all multicast addresses */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - set_multicast_list(dev); - break; - - case DEPCA_MCA_EN: /* Enable pass all multicast addressing */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - set_multicast_list(dev); - break; - - case DEPCA_GET_STATS: /* Get the driver statistics */ - ioc->len = sizeof(lp->pktStats); - buf = kmalloc(ioc->len, GFP_KERNEL); - if(!buf) - return -ENOMEM; - spin_lock_irqsave(&lp->lock, flags); - memcpy(buf, &lp->pktStats, ioc->len); - spin_unlock_irqrestore(&lp->lock, flags); - if (copy_to_user(ioc->data, buf, ioc->len)) - status = -EFAULT; - kfree(buf); - break; - - case DEPCA_CLR_STATS: /* Zero out the driver statistics */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - spin_lock_irqsave(&lp->lock, flags); - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->lock, flags); - break; - - case DEPCA_GET_REG: /* Get the DEPCA Registers */ - i = 0; - tmp.sval[i++] = inw(DEPCA_NICSR); - outw(CSR0, DEPCA_ADDR); /* status register */ - tmp.sval[i++] = inw(DEPCA_DATA); - memcpy(&tmp.sval[i], &lp->init_block, sizeof(struct depca_init)); - ioc->len = i + sizeof(struct depca_init); - if (copy_to_user(ioc->data, tmp.addr, ioc->len)) - return -EFAULT; - break; - - default: - return -EOPNOTSUPP; - } - - return status; -} - -static int __init depca_module_init (void) -{ - int err = 0; - -#ifdef CONFIG_EISA - err = eisa_driver_register(&depca_eisa_driver); - if (err) - goto err_eisa; -#endif - err = platform_driver_register(&depca_isa_driver); - if (err) - goto err_eisa; - - depca_platform_probe(); - return 0; - -err_eisa: -#ifdef CONFIG_EISA - eisa_driver_unregister(&depca_eisa_driver); -#endif - return err; -} - -static void __exit depca_module_exit (void) -{ - int i; -#ifdef CONFIG_EISA - eisa_driver_unregister (&depca_eisa_driver); -#endif - platform_driver_unregister (&depca_isa_driver); - - for (i = 0; depca_io_ports[i].iobase; i++) { - if (depca_io_ports[i].device) { - depca_io_ports[i].device->dev.platform_data = NULL; - platform_device_unregister (depca_io_ports[i].device); - depca_io_ports[i].device = NULL; - } - } -} - -module_init (depca_module_init); -module_exit (depca_module_exit); diff --git a/drivers/net/ethernet/amd/depca.h b/drivers/net/ethernet/amd/depca.h deleted file mode 100644 index cdcfe42..0000000 --- a/drivers/net/ethernet/amd/depca.h +++ /dev/null @@ -1,183 +0,0 @@ -/* - Written 1994 by David C. Davies. - - Copyright 1994 David C. Davies. This software may be used and distributed - according to the terms of the GNU General Public License, incorporated herein by - reference. -*/ - -/* -** I/O addresses. Note that the 2k buffer option is not supported in -** this driver. -*/ -#define DEPCA_NICSR ioaddr+0x00 /* Network interface CSR */ -#define DEPCA_RBI ioaddr+0x02 /* RAM buffer index (2k buffer mode) */ -#define DEPCA_DATA ioaddr+0x04 /* LANCE registers' data port */ -#define DEPCA_ADDR ioaddr+0x06 /* LANCE registers' address port */ -#define DEPCA_HBASE ioaddr+0x08 /* EISA high memory base address reg. */ -#define DEPCA_PROM ioaddr+0x0c /* Ethernet address ROM data port */ -#define DEPCA_CNFG ioaddr+0x0c /* EISA Configuration port */ -#define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */ - -/* -** These are LANCE registers addressable through DEPCA_ADDR -*/ -#define CSR0 0 -#define CSR1 1 -#define CSR2 2 -#define CSR3 3 - -/* -** NETWORK INTERFACE CSR (NI_CSR) bit definitions -*/ - -#define TO 0x0100 /* Time Out for remote boot */ -#define SHE 0x0080 /* SHadow memory Enable */ -#define BS 0x0040 /* Bank Select */ -#define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */ -#define RBE 0x0010 /* Remote Boot Enable (1->net boot) */ -#define AAC 0x0008 /* Address ROM Address Counter (1->enable) */ -#define _128KB 0x0008 /* 128kB Network RAM (1->enable) */ -#define IM 0x0004 /* Interrupt Mask (1->mask) */ -#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */ -#define LED 0x0001 /* LED control */ - -/* -** Control and Status Register 0 (CSR0) bit definitions -*/ - -#define ERR 0x8000 /* Error summary */ -#define BABL 0x4000 /* Babble transmitter timeout error */ -#define CERR 0x2000 /* Collision Error */ -#define MISS 0x1000 /* Missed packet */ -#define MERR 0x0800 /* Memory Error */ -#define RINT 0x0400 /* Receiver Interrupt */ -#define TINT 0x0200 /* Transmit Interrupt */ -#define IDON 0x0100 /* Initialization Done */ -#define INTR 0x0080 /* Interrupt Flag */ -#define INEA 0x0040 /* Interrupt Enable */ -#define RXON 0x0020 /* Receiver on */ -#define TXON 0x0010 /* Transmitter on */ -#define TDMD 0x0008 /* Transmit Demand */ -#define STOP 0x0004 /* Stop */ -#define STRT 0x0002 /* Start */ -#define INIT 0x0001 /* Initialize */ -#define INTM 0xff00 /* Interrupt Mask */ -#define INTE 0xfff0 /* Interrupt Enable */ - -/* -** CONTROL AND STATUS REGISTER 3 (CSR3) -*/ - -#define BSWP 0x0004 /* Byte SWaP */ -#define ACON 0x0002 /* ALE control */ -#define BCON 0x0001 /* Byte CONtrol */ - -/* -** Initialization Block Mode Register -*/ - -#define PROM 0x8000 /* Promiscuous Mode */ -#define EMBA 0x0080 /* Enable Modified Back-off Algorithm */ -#define INTL 0x0040 /* Internal Loopback */ -#define DRTY 0x0020 /* Disable Retry */ -#define COLL 0x0010 /* Force Collision */ -#define DTCR 0x0008 /* Disable Transmit CRC */ -#define LOOP 0x0004 /* Loopback */ -#define DTX 0x0002 /* Disable the Transmitter */ -#define DRX 0x0001 /* Disable the Receiver */ - -/* -** Receive Message Descriptor 1 (RMD1) bit definitions. -*/ - -#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ -#define R_ERR 0x4000 /* Error Summary */ -#define R_FRAM 0x2000 /* Framing Error */ -#define R_OFLO 0x1000 /* Overflow Error */ -#define R_CRC 0x0800 /* CRC Error */ -#define R_BUFF 0x0400 /* Buffer Error */ -#define R_STP 0x0200 /* Start of Packet */ -#define R_ENP 0x0100 /* End of Packet */ - -/* -** Transmit Message Descriptor 1 (TMD1) bit definitions. -*/ - -#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ -#define T_ERR 0x4000 /* Error Summary */ -#define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */ -#define T_MORE 0x1000 /* >1 retry to transmit packet */ -#define T_ONE 0x0800 /* 1 try needed to transmit the packet */ -#define T_DEF 0x0400 /* Deferred */ -#define T_STP 0x02000000 /* Start of Packet */ -#define T_ENP 0x01000000 /* End of Packet */ -#define T_FLAGS 0xff000000 /* TX Flags Field */ - -/* -** Transmit Message Descriptor 3 (TMD3) bit definitions. -*/ - -#define TMD3_BUFF 0x8000 /* BUFFer error */ -#define TMD3_UFLO 0x4000 /* UnderFLOw error */ -#define TMD3_RES 0x2000 /* REServed */ -#define TMD3_LCOL 0x1000 /* Late COLlision */ -#define TMD3_LCAR 0x0800 /* Loss of CARrier */ -#define TMD3_RTRY 0x0400 /* ReTRY error */ - -/* -** EISA configuration Register (CNFG) bit definitions -*/ - -#define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */ -#define REMOTE 0x0080 /* Remote Boot Enable -> 1 */ -#define IRQ11 0x0040 /* Enable -> 1 */ -#define IRQ10 0x0020 /* Enable -> 1 */ -#define IRQ9 0x0010 /* Enable -> 1 */ -#define IRQ5 0x0008 /* Enable -> 1 */ -#define BUFF 0x0004 /* 0: 64kB or 128kB, 1: 32kB */ -#define PADR16 0x0002 /* RAM on 64kB boundary */ -#define PADR17 0x0001 /* RAM on 128kB boundary */ - -/* -** Miscellaneous -*/ -#define HASH_TABLE_LEN 64 /* Bits */ -#define HASH_BITS 0x003f /* 6 LS bits */ - -#define MASK_INTERRUPTS 1 -#define UNMASK_INTERRUPTS 0 - -#define EISA_EN 0x0001 /* Enable EISA bus buffers */ -#define EISA_ID iobase+0x0080 /* ID long word for EISA card */ -#define EISA_CTRL iobase+0x0084 /* Control word for EISA card */ - -/* -** Include the IOCTL stuff -*/ -#include - -struct depca_ioctl { - unsigned short cmd; /* Command to run */ - unsigned short len; /* Length of the data buffer */ - unsigned char __user *data; /* Pointer to the data buffer */ -}; - -/* -** Recognised commands for the driver -*/ -#define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */ -#define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */ -#define DEPCA_SET_PROM 0x03 /* Set Promiscuous Mode */ -#define DEPCA_CLR_PROM 0x04 /* Clear Promiscuous Mode */ -#define DEPCA_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ -#define DEPCA_GET_MCA 0x06 /* Get a multicast address */ -#define DEPCA_SET_MCA 0x07 /* Set a multicast address */ -#define DEPCA_CLR_MCA 0x08 /* Clear a multicast address */ -#define DEPCA_MCA_EN 0x09 /* Enable a multicast address group */ -#define DEPCA_GET_STATS 0x0a /* Get the driver statistics */ -#define DEPCA_CLR_STATS 0x0b /* Zero out the driver statistics */ -#define DEPCA_GET_REG 0x0c /* Get the Register contents */ -#define DEPCA_SET_REG 0x0d /* Set the Register contents */ -#define DEPCA_DUMP 0x0f /* Dump the DEPCA Status */ - -- cgit v0.10.2 From 0ffd89e48fc10f9665b07615cde40b1775b24570 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 20 Jan 2013 17:14:45 -0500 Subject: drivers/net: delete Digital EtherWorks-3 support. This is another one that makes sense to target for obsolescence, since it (a)appeared pre-1995, and (b)was rather rare, and (c)did not really have any statistically significant active linux user base. Removing this ISA 10Mbit driver support is unlikely to be even noticed by the user base of 3.9+ linux kernels, especially when the documentation clearly indicates the vintage with this text: "...designed to work with all kernels > 1.1.33" Signed-off-by: Paul Gortmaker diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 6ec1d6f..258d9b9 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -70,8 +70,6 @@ e1000e.txt - README for the Intel Gigabit Ethernet Driver (e1000e). eql.txt - serial IP load balancing -ewrk3.txt - - the Digital EtherWORKS 3 DE203/4/5 Ethernet driver fib_trie.txt - Level Compressed Trie (LC-trie) notes: a structure for routing. filter.txt diff --git a/Documentation/networking/ewrk3.txt b/Documentation/networking/ewrk3.txt deleted file mode 100644 index 90e9e5f..0000000 --- a/Documentation/networking/ewrk3.txt +++ /dev/null @@ -1,46 +0,0 @@ -The EtherWORKS 3 driver in this distribution is designed to work with all -kernels > 1.1.33 (approx) and includes tools in the 'ewrk3tools' -subdirectory to allow set up of the card, similar to the MSDOS -'NICSETUP.EXE' tools provided on the DOS drivers disk (type 'make' in that -subdirectory to make the tools). - -The supported cards are DE203, DE204 and DE205. All other cards are NOT -supported - refer to 'depca.c' for running the LANCE based network cards and -'de4x5.c' for the DIGITAL Semiconductor PCI chip based adapters from -Digital. - -The ability to load this driver as a loadable module has been included and -used extensively during the driver development (to save those long reboot -sequences). To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) edit the source code near line 1898 to reflect the I/O address and - IRQ you're using. - 3) compile ewrk3.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the ewrk3 configuration turned off and reboot. - 5) insmod ewrk3.o - [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y] - [Adam Kropelin: Multiple cards now supported by irq=x1,x2 io=y1,y2] - 6) run the net startup bits for your new eth?? interface manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - Note that autoprobing is not allowed in loadable modules - the system is - already up and running and you're messing with interrupts. - - To unload a module, turn off the associated interface - 'ifconfig eth?? down' then 'rmmod ewrk3'. - -The performance we've achieved so far has been measured through the 'ttcp' -tool at 975kB/s. This measures the total TCP stack performance which -includes the card, so don't expect to get much nearer the 1.25MB/s -theoretical Ethernet rate. - - -Enjoy! - -Dave diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 393b017..9c30ea4 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -43,7 +43,6 @@ extern struct net_device *wd_probe(int unit); extern struct net_device *ne_probe(int unit); extern struct net_device *fmv18x_probe(int unit); extern struct net_device *i82596_probe(int unit); -extern struct net_device *ewrk3_probe(int unit); extern struct net_device *ni65_probe(int unit); extern struct net_device *sonic_probe(int unit); extern struct net_device *seeq8005_probe(int unit); @@ -122,9 +121,6 @@ static struct devprobe2 isa_probes[] __initdata = { {cs89x0_probe, 0}, #endif #endif -#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ - {ewrk3_probe, 0}, -#endif #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ {i82596_probe, 0}, #endif diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig index 3794027..68262aa 100644 --- a/drivers/net/ethernet/dec/Kconfig +++ b/drivers/net/ethernet/dec/Kconfig @@ -17,21 +17,5 @@ config NET_VENDOR_DEC your specific card in the following questions. if NET_VENDOR_DEC - -config EWRK3 - tristate "EtherWORKS 3 (DE203, DE204, DE205) support" - depends on ISA - select CRC32 - ---help--- - This driver supports the DE203, DE204 and DE205 network (Ethernet) - cards. If this is for you, say Y and read - in the kernel source as - well as the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called ewrk3. - source "drivers/net/ethernet/dec/tulip/Kconfig" - endif # NET_VENDOR_DEC diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile index 1b01ed8..32993fc 100644 --- a/drivers/net/ethernet/dec/Makefile +++ b/drivers/net/ethernet/dec/Makefile @@ -2,5 +2,4 @@ # Makefile for the Digital Equipment Inc. network device drivers. # -obj-$(CONFIG_EWRK3) += ewrk3.o obj-$(CONFIG_NET_TULIP) += tulip/ diff --git a/drivers/net/ethernet/dec/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c deleted file mode 100644 index 5015172..0000000 --- a/drivers/net/ethernet/dec/ewrk3.c +++ /dev/null @@ -1,1961 +0,0 @@ -/* ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux. - - Written 1994 by David C. Davies. - - Copyright 1994 Digital Equipment Corporation. - - This software may be used and distributed according to the terms of - the GNU General Public License, incorporated herein by reference. - - This driver is written for the Digital Equipment Corporation series - of EtherWORKS ethernet cards: - - DE203 Turbo (BNC) - DE204 Turbo (TP) - DE205 Turbo (TP BNC) - - The driver has been tested on a relatively busy network using the DE205 - card and benchmarked with 'ttcp': it transferred 16M of data at 975kB/s - (7.8Mb/s) to a DECstation 5000/200. - - The author may be reached at davies@maniac.ultranet.com. - - ========================================================================= - This driver has been written substantially from scratch, although its - inheritance of style and stack interface from 'depca.c' and in turn from - Donald Becker's 'lance.c' should be obvious. - - The DE203/4/5 boards all use a new proprietary chip in place of the - LANCE chip used in prior cards (DEPCA, DE100, DE200/1/2, DE210, DE422). - Use the depca.c driver in the standard distribution for the LANCE based - cards from DIGITAL; this driver will not work with them. - - The DE203/4/5 cards have 2 main modes: shared memory and I/O only. I/O - only makes all the card accesses through I/O transactions and no high - (shared) memory is used. This mode provides a >48% performance penalty - and is deprecated in this driver, although allowed to provide initial - setup when hardstrapped. - - The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is - no point in using any mode other than the 2kB mode - their performances - are virtually identical, although the driver has been tested in the 2kB - and 32kB modes. I would suggest you uncomment the line: - - FORCE_2K_MODE; - - to allow the driver to configure the card as a 2kB card at your current - base address, thus leaving more room to clutter your system box with - other memory hungry boards. - - As many ISA and EISA cards can be supported under this driver as you - wish, limited primarily by the available IRQ lines, rather than by the - available I/O addresses (24 ISA, 16 EISA). I have checked different - configurations of multiple depca cards and ewrk3 cards and have not - found a problem yet (provided you have at least depca.c v0.38) ... - - The board IRQ setting must be at an unused IRQ which is auto-probed - using Donald Becker's autoprobe routines. All these cards are at - {5,10,11,15}. - - No 16MB memory limitation should exist with this driver as DMA is not - used and the common memory area is in low memory on the network card (my - current system has 20MB and I've not had problems yet). - - The ability to load this driver as a loadable module has been included - and used extensively during the driver development (to save those long - reboot sequences). To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) edit the source code near line 1898 to reflect the I/O address and - IRQ you're using. - 3) compile ewrk3.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the ewrk3 configuration turned off and reboot. - 5) insmod ewrk3.o - [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y] - [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards] - 6) run the net startup bits for your new eth?? interface manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - Note that autoprobing is not allowed in loadable modules - the system is - already up and running and you're messing with interrupts. - - To unload a module, turn off the associated interface - 'ifconfig eth?? down' then 'rmmod ewrk3'. - - Promiscuous mode has been turned off in this driver, but all the - multicast address bits have been turned on. This improved the send - performance on a busy network by about 13%. - - Ioctl's have now been provided (primarily because I wanted to grab some - packet size statistics). They are patterned after 'plipconfig.c' from a - suggestion by Alan Cox. Using these ioctls, you can enable promiscuous - mode, add/delete multicast addresses, change the hardware address, get - packet size distribution statistics and muck around with the control and - status register. I'll add others if and when the need arises. - - TO DO: - ------ - - - Revision History - ---------------- - - Version Date Description - - 0.1 26-aug-94 Initial writing. ALPHA code release. - 0.11 31-aug-94 Fixed: 2k mode memory base calc., - LeMAC version calc., - IRQ vector assignments during autoprobe. - 0.12 31-aug-94 Tested working on LeMAC2 (DE20[345]-AC) card. - Fixed up MCA hash table algorithm. - 0.20 4-sep-94 Added IOCTL functionality. - 0.21 14-sep-94 Added I/O mode. - 0.21axp 15-sep-94 Special version for ALPHA AXP Linux V1.0. - 0.22 16-sep-94 Added more IOCTLs & tidied up. - 0.23 21-sep-94 Added transmit cut through. - 0.24 31-oct-94 Added uid checks in some ioctls. - 0.30 1-nov-94 BETA code release. - 0.31 5-dec-94 Added check/allocate region code. - 0.32 16-jan-95 Broadcast packet fix. - 0.33 10-Feb-95 Fix recognition bug reported by . - 0.40 27-Dec-95 Rationalise MODULE and autoprobe code. - Rewrite for portability & updated. - ALPHA support from - Added verify_area() calls in ewrk3_ioctl() from - suggestion by . - Add new multicasting code. - 0.41 20-Jan-96 Fix IRQ set up problem reported by - . - 0.42 22-Apr-96 Fix alloc_device() bug - 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c - 0.44 08-Nov-01 use library crc32 functions - 0.45 19-Jul-02 fix unaligned access on alpha - 0.46 10-Oct-02 Multiple NIC support when module - 0.47 18-Oct-02 ethtool support - 0.48 18-Oct-02 cli/sti removal for 2.5 - ioctl locking, signature search cleanup - - ========================================================================= - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "ewrk3.h" - -#define DRV_NAME "ewrk3" -#define DRV_VERSION "0.48" - -static char version[] __initdata = -DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n"; - -#ifdef EWRK3_DEBUG -static int ewrk3_debug = EWRK3_DEBUG; -#else -static int ewrk3_debug = 1; -#endif - -#define EWRK3_NDA 0xffe0 /* No Device Address */ - -#define PROBE_LENGTH 32 -#define ETH_PROM_SIG 0xAA5500FFUL - -#ifndef EWRK3_SIGNATURE -#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""} -#define EWRK3_STRLEN 8 -#endif - -#ifndef EWRK3_RAM_BASE_ADDRESSES -#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000} -#endif - -/* - ** Sets up the I/O area for the autoprobe. - */ -#define EWRK3_IO_BASE 0x100 /* Start address for probe search */ -#define EWRK3_IOP_INC 0x20 /* I/O address increment */ -#define EWRK3_TOTAL_SIZE 0x20 /* required I/O address length */ - -#ifndef MAX_NUM_EWRK3S -#define MAX_NUM_EWRK3S 21 -#endif - -#ifndef EWRK3_EISA_IO_PORTS -#define EWRK3_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ -#endif - -#ifndef MAX_EISA_SLOTS -#define MAX_EISA_SLOTS 16 -#define EISA_SLOT_INC 0x1000 -#endif - -#define QUEUE_PKT_TIMEOUT (1*HZ) /* Jiffies */ - -/* - ** EtherWORKS 3 shared memory window sizes - */ -#define IO_ONLY 0x00 -#define SHMEM_2K 0x800 -#define SHMEM_32K 0x8000 -#define SHMEM_64K 0x10000 - -/* - ** EtherWORKS 3 IRQ ENABLE/DISABLE - */ -#define ENABLE_IRQs { \ - icr |= lp->irq_mask;\ - outb(icr, EWRK3_ICR); /* Enable the IRQs */\ -} - -#define DISABLE_IRQs { \ - icr = inb(EWRK3_ICR);\ - icr &= ~lp->irq_mask;\ - outb(icr, EWRK3_ICR); /* Disable the IRQs */\ -} - -/* - ** EtherWORKS 3 START/STOP - */ -#define START_EWRK3 { \ - csr = inb(EWRK3_CSR);\ - csr &= ~(CSR_TXD|CSR_RXD);\ - outb(csr, EWRK3_CSR); /* Enable the TX and/or RX */\ -} - -#define STOP_EWRK3 { \ - csr = (CSR_TXD|CSR_RXD);\ - outb(csr, EWRK3_CSR); /* Disable the TX and/or RX */\ -} - -/* - ** The EtherWORKS 3 private structure - */ -#define EWRK3_PKT_STAT_SZ 16 -#define EWRK3_PKT_BIN_SZ 128 /* Should be >=100 unless you - increase EWRK3_PKT_STAT_SZ */ - -struct ewrk3_stats { - u32 bins[EWRK3_PKT_STAT_SZ]; - u32 unicast; - u32 multicast; - u32 broadcast; - u32 excessive_collisions; - u32 tx_underruns; - u32 excessive_underruns; -}; - -struct ewrk3_private { - char adapter_name[80]; /* Name exported to /proc/ioports */ - u_long shmem_base; /* Shared memory start address */ - void __iomem *shmem; - u_long shmem_length; /* Shared memory window length */ - struct ewrk3_stats pktStats; /* Private stats counters */ - u_char irq_mask; /* Adapter IRQ mask bits */ - u_char mPage; /* Maximum 2kB Page number */ - u_char lemac; /* Chip rev. level */ - u_char hard_strapped; /* Don't allow a full open */ - u_char txc; /* Transmit cut through */ - void __iomem *mctbl; /* Pointer to the multicast table */ - u_char led_mask; /* Used to reserve LED access for ethtool */ - spinlock_t hw_lock; -}; - -/* - ** Force the EtherWORKS 3 card to be in 2kB MODE - */ -#define FORCE_2K_MODE { \ - shmem_length = SHMEM_2K;\ - outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\ -} - -/* - ** Public Functions - */ -static int ewrk3_open(struct net_device *dev); -static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t ewrk3_interrupt(int irq, void *dev_id); -static int ewrk3_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static const struct ethtool_ops ethtool_ops_203; -static const struct ethtool_ops ethtool_ops; - -/* - ** Private functions - */ -static int ewrk3_hw_init(struct net_device *dev, u_long iobase); -static void ewrk3_init(struct net_device *dev); -static int ewrk3_rx(struct net_device *dev); -static int ewrk3_tx(struct net_device *dev); -static void ewrk3_timeout(struct net_device *dev); - -static void EthwrkSignature(char *name, char *eeprom_image); -static int DevicePresent(u_long iobase); -static void SetMulticastFilter(struct net_device *dev); -static int EISA_signature(char *name, s32 eisa_id); - -static int Read_EEPROM(u_long iobase, u_char eaddr); -static int Write_EEPROM(short data, u_long iobase, u_char eaddr); -static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType); - -static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq); -static int isa_probe(struct net_device *dev, u_long iobase); -static int eisa_probe(struct net_device *dev, u_long iobase); - -static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12}; - -static char name[EWRK3_STRLEN + 1]; -static int num_ewrks3s; - -/* - ** Miscellaneous defines... - */ -#define INIT_EWRK3 {\ - outb(EEPROM_INIT, EWRK3_IOPR);\ - mdelay(1);\ -} - -#ifndef MODULE -struct net_device * __init ewrk3_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - err = ewrk3_probe1(dev, dev->base_addr, dev->irq); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); - -} -#endif - -static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) -{ - int err; - - dev->base_addr = iobase; - dev->irq = irq; - - /* Address PROM pattern */ - err = isa_probe(dev, iobase); - if (err != 0) - err = eisa_probe(dev, iobase); - - if (err) - return err; - - err = register_netdev(dev); - if (err) - release_region(dev->base_addr, EWRK3_TOTAL_SIZE); - - return err; -} - -static const struct net_device_ops ewrk3_netdev_ops = { - .ndo_open = ewrk3_open, - .ndo_start_xmit = ewrk3_queue_pkt, - .ndo_stop = ewrk3_close, - .ndo_set_rx_mode = set_multicast_list, - .ndo_do_ioctl = ewrk3_ioctl, - .ndo_tx_timeout = ewrk3_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init -ewrk3_hw_init(struct net_device *dev, u_long iobase) -{ - struct ewrk3_private *lp; - int i, status = 0; - u_long mem_start, shmem_length; - u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0; - u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0; - - /* - ** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot. - ** This also disables the EISA_ENABLE bit in the EISA Control Register. - */ - if (iobase > 0x400) - eisa_cr = inb(EISA_CR); - INIT_EWRK3; - - nicsr = inb(EWRK3_CSR); - - icr = inb(EWRK3_ICR); - icr &= 0x70; - outb(icr, EWRK3_ICR); /* Disable all the IRQs */ - - if (nicsr != (CSR_TXD | CSR_RXD)) - return -ENXIO; - - /* Check that the EEPROM is alive and well and not living on Pluto... */ - for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) { - union { - short val; - char c[2]; - } tmp; - - tmp.val = (short) Read_EEPROM(iobase, (i >> 1)); - eeprom_image[i] = tmp.c[0]; - eeprom_image[i + 1] = tmp.c[1]; - chksum += eeprom_image[i] + eeprom_image[i + 1]; - } - - if (chksum != 0) { /* Bad EEPROM Data! */ - printk("%s: Device has a bad on-board EEPROM.\n", dev->name); - return -ENXIO; - } - - EthwrkSignature(name, eeprom_image); - if (*name == '\0') - return -ENXIO; - - dev->base_addr = iobase; - - if (iobase > 0x400) { - outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */ - } - lemac = eeprom_image[EEPROM_CHIPVER]; - cmr = inb(EWRK3_CMR); - - if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) || - ((lemac == LeMAC2) && !(cmr & CMR_HS))) { - printk("%s: %s at %#4lx", dev->name, name, iobase); - hard_strapped = 1; - } else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) { - /* EISA slot address */ - printk("%s: %s at %#4lx (EISA slot %ld)", - dev->name, name, iobase, ((iobase >> 12) & 0x0f)); - } else { /* ISA port address */ - printk("%s: %s at %#4lx", dev->name, name, iobase); - } - - printk(", h/w address "); - if (lemac != LeMAC2) - DevicePresent(iobase); /* need after EWRK3_INIT */ - status = get_hw_addr(dev, eeprom_image, lemac); - printk("%pM\n", dev->dev_addr); - - if (status) { - printk(" which has an EEPROM CRC error.\n"); - return -ENXIO; - } - - if (lemac == LeMAC2) { /* Special LeMAC2 CMR things */ - cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS); - if (eeprom_image[EEPROM_MISC0] & READ_AHEAD) - cmr |= CMR_RA; - if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND) - cmr |= CMR_WB; - if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL) - cmr |= CMR_POLARITY; - if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK) - cmr |= CMR_LINK; - if (eeprom_image[EEPROM_MISC0] & _0WS_ENA) - cmr |= CMR_0WS; - } - if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM) - cmr |= CMR_DRAM; - outb(cmr, EWRK3_CMR); - - cr = inb(EWRK3_CR); /* Set up the Control Register */ - cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD; - if (cr & SETUP_APD) - cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS; - cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS; - cr |= eeprom_image[EEPROM_MISC0] & ENA_16; - outb(cr, EWRK3_CR); - - /* - ** Determine the base address and window length for the EWRK3 - ** RAM from the memory base register. - */ - mem_start = inb(EWRK3_MBR); - shmem_length = 0; - if (mem_start != 0) { - if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) { - mem_start *= SHMEM_64K; - shmem_length = SHMEM_64K; - } else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) { - mem_start *= SHMEM_32K; - shmem_length = SHMEM_32K; - } else if ((mem_start >= 0x40) && (mem_start <= 0xff)) { - mem_start = mem_start * SHMEM_2K + 0x80000; - shmem_length = SHMEM_2K; - } else { - return -ENXIO; - } - } - /* - ** See the top of this source code for comments about - ** uncommenting this line. - */ -/* FORCE_2K_MODE; */ - - if (hard_strapped) { - printk(" is hard strapped.\n"); - } else if (mem_start) { - printk(" has a %dk RAM window", (int) (shmem_length >> 10)); - printk(" at 0x%.5lx", mem_start); - } else { - printk(" is in I/O only mode"); - } - - lp = netdev_priv(dev); - lp->shmem_base = mem_start; - lp->shmem = ioremap(mem_start, shmem_length); - if (!lp->shmem) - return -ENOMEM; - lp->shmem_length = shmem_length; - lp->lemac = lemac; - lp->hard_strapped = hard_strapped; - lp->led_mask = CR_LED; - spin_lock_init(&lp->hw_lock); - - lp->mPage = 64; - if (cmr & CMR_DRAM) - lp->mPage <<= 1; /* 2 DRAMS on module */ - - sprintf(lp->adapter_name, "%s (%s)", name, dev->name); - - lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM; - - if (!hard_strapped) { - /* - ** Enable EWRK3 board interrupts for autoprobing - */ - icr |= ICR_IE; /* Enable interrupts */ - outb(icr, EWRK3_ICR); - - /* The DMA channel may be passed in on this parameter. */ - dev->dma = 0; - - /* To auto-IRQ we enable the initialization-done and DMA err, - interrupts. For now we will always get a DMA error. */ - if (dev->irq < 2) { -#ifndef MODULE - u_char irqnum; - unsigned long irq_mask; - - - irq_mask = probe_irq_on(); - - /* - ** Trigger a TNE interrupt. - */ - icr |= ICR_TNEM; - outb(1, EWRK3_TDQ); /* Write to the TX done queue */ - outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */ - - irqnum = irq[((icr & IRQ_SEL) >> 4)]; - - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - if ((dev->irq) && (irqnum == dev->irq)) { - printk(" and uses IRQ%d.\n", dev->irq); - } else { - if (!dev->irq) { - printk(" and failed to detect IRQ line.\n"); - } else if ((irqnum == 1) && (lemac == LeMAC2)) { - printk(" and an illegal IRQ line detected.\n"); - } else { - printk(", but incorrect IRQ line detected.\n"); - } - iounmap(lp->shmem); - return -ENXIO; - } - - DISABLE_IRQs; /* Mask all interrupts */ - -#endif /* MODULE */ - } else { - printk(" and requires IRQ%d.\n", dev->irq); - } - } - - if (ewrk3_debug > 1) { - printk(version); - } - /* The EWRK3-specific entries in the device structure. */ - dev->netdev_ops = &ewrk3_netdev_ops; - if (lp->adapter_name[4] == '3') - SET_ETHTOOL_OPS(dev, ðtool_ops_203); - else - SET_ETHTOOL_OPS(dev, ðtool_ops); - dev->watchdog_timeo = QUEUE_PKT_TIMEOUT; - - dev->mem_start = 0; - - return 0; -} - - -static int ewrk3_open(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int status = 0; - u_char icr, csr; - - /* - ** Stop the TX and RX... - */ - STOP_EWRK3; - - if (!lp->hard_strapped) { - if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) { - printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq); - status = -EAGAIN; - } else { - - /* - ** Re-initialize the EWRK3... - */ - ewrk3_init(dev); - - if (ewrk3_debug > 1) { - printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq); - printk(" physical address: %pM\n", dev->dev_addr); - if (lp->shmem_length == 0) { - printk(" no shared memory, I/O only mode\n"); - } else { - printk(" start of shared memory: 0x%08lx\n", lp->shmem_base); - printk(" window length: 0x%04lx\n", lp->shmem_length); - } - printk(" # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1)); - printk(" csr: 0x%02x\n", inb(EWRK3_CSR)); - printk(" cr: 0x%02x\n", inb(EWRK3_CR)); - printk(" icr: 0x%02x\n", inb(EWRK3_ICR)); - printk(" cmr: 0x%02x\n", inb(EWRK3_CMR)); - printk(" fmqc: 0x%02x\n", inb(EWRK3_FMQC)); - } - netif_start_queue(dev); - /* - ** Unmask EWRK3 board interrupts - */ - icr = inb(EWRK3_ICR); - ENABLE_IRQs; - - } - } else { - printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name); - printk(KERN_ERR " Run the 'ewrk3setup' utility or remove the hard straps.\n"); - return -EINVAL; - } - - return status; -} - -/* - ** Initialize the EtherWORKS 3 operating conditions - */ -static void ewrk3_init(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_char csr, page; - u_long iobase = dev->base_addr; - int i; - - /* - ** Enable any multicasts - */ - set_multicast_list(dev); - - /* - ** Set hardware MAC address. Address is initialized from the EEPROM - ** during startup but may have since been changed by the user. - */ - for (i=0; idev_addr[i], EWRK3_PAR0 + i); - - /* - ** Clean out any remaining entries in all the queues here - */ - while (inb(EWRK3_TQ)); - while (inb(EWRK3_TDQ)); - while (inb(EWRK3_RQ)); - while (inb(EWRK3_FMQ)); - - /* - ** Write a clean free memory queue - */ - for (page = 1; page < lp->mPage; page++) { /* Write the free page numbers */ - outb(page, EWRK3_FMQ); /* to the Free Memory Queue */ - } - - START_EWRK3; /* Enable the TX and/or RX */ -} - -/* - * Transmit timeout - */ - -static void ewrk3_timeout(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_char icr, csr; - u_long iobase = dev->base_addr; - - if (!lp->hard_strapped) - { - printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n", - dev->name, inb(EWRK3_CSR)); - - /* - ** Mask all board interrupts - */ - DISABLE_IRQs; - - /* - ** Stop the TX and RX... - */ - STOP_EWRK3; - - ewrk3_init(dev); - - /* - ** Unmask EWRK3 board interrupts - */ - ENABLE_IRQs; - - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); - } -} - -/* - ** Writes a socket buffer to the free page queue - */ -static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - void __iomem *buf = NULL; - u_char icr; - u_char page; - - spin_lock_irq (&lp->hw_lock); - DISABLE_IRQs; - - /* if no resources available, exit, request packet be queued */ - if (inb (EWRK3_FMQC) == 0) { - printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n", - dev->name); - printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n", - dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR), - inb (EWRK3_FMQC)); - goto err_out; - } - - /* - ** Get a free page from the FMQ - */ - if ((page = inb (EWRK3_FMQ)) >= lp->mPage) { - printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n", - (u_char) page); - goto err_out; - } - - - /* - ** Set up shared memory window and pointer into the window - */ - if (lp->shmem_length == IO_ONLY) { - outb (page, EWRK3_IOPR); - } else if (lp->shmem_length == SHMEM_2K) { - buf = lp->shmem; - outb (page, EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_32K) { - buf = (((short) page << 11) & 0x7800) + lp->shmem; - outb ((page >> 4), EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_64K) { - buf = (((short) page << 11) & 0xf800) + lp->shmem; - outb ((page >> 5), EWRK3_MPR); - } else { - printk (KERN_ERR "%s: Oops - your private data area is hosed!\n", - dev->name); - BUG (); - } - - /* - ** Set up the buffer control structures and copy the data from - ** the socket buffer to the shared memory . - */ - if (lp->shmem_length == IO_ONLY) { - int i; - u_char *p = skb->data; - outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA); - outb ((char) (skb->len & 0xff), EWRK3_DATA); - outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA); - outb ((char) 0x04, EWRK3_DATA); - for (i = 0; i < skb->len; i++) { - outb (*p++, EWRK3_DATA); - } - outb (page, EWRK3_TQ); /* Start sending pkt */ - } else { - writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf); /* ctrl byte */ - buf += 1; - writeb ((char) (skb->len & 0xff), buf); /* length (16 bit xfer) */ - buf += 1; - if (lp->txc) { - writeb(((skb->len >> 8) & 0xff) | XCT, buf); - buf += 1; - writeb (0x04, buf); /* index byte */ - buf += 1; - writeb (0x00, (buf + skb->len)); /* Write the XCT flag */ - memcpy_toio (buf, skb->data, PRELOAD); /* Write PRELOAD bytes */ - outb (page, EWRK3_TQ); /* Start sending pkt */ - memcpy_toio (buf + PRELOAD, - skb->data + PRELOAD, - skb->len - PRELOAD); - writeb (0xff, (buf + skb->len)); /* Write the XCT flag */ - } else { - writeb ((skb->len >> 8) & 0xff, buf); - buf += 1; - writeb (0x04, buf); /* index byte */ - buf += 1; - memcpy_toio (buf, skb->data, skb->len); /* Write data bytes */ - outb (page, EWRK3_TQ); /* Start sending pkt */ - } - } - - ENABLE_IRQs; - spin_unlock_irq (&lp->hw_lock); - - dev->stats.tx_bytes += skb->len; - dev_kfree_skb (skb); - - /* Check for free resources: stop Tx queue if there are none */ - if (inb (EWRK3_FMQC) == 0) - netif_stop_queue (dev); - - return NETDEV_TX_OK; - -err_out: - ENABLE_IRQs; - spin_unlock_irq (&lp->hw_lock); - return NETDEV_TX_BUSY; -} - -/* - ** The EWRK3 interrupt handler. - */ -static irqreturn_t ewrk3_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ewrk3_private *lp; - u_long iobase; - u_char icr, cr, csr; - - lp = netdev_priv(dev); - iobase = dev->base_addr; - - /* get the interrupt information */ - csr = inb(EWRK3_CSR); - - /* - ** Mask the EWRK3 board interrupts and turn on the LED - */ - spin_lock(&lp->hw_lock); - DISABLE_IRQs; - - cr = inb(EWRK3_CR); - cr |= lp->led_mask; - outb(cr, EWRK3_CR); - - if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */ - ewrk3_rx(dev); - - if (csr & CSR_TNE) /* Tx interrupt (packet sent) */ - ewrk3_tx(dev); - - /* - ** Now deal with the TX/RX disable flags. These are set when there - ** are no more resources. If resources free up then enable these - ** interrupts, otherwise mask them - failure to do this will result - ** in the system hanging in an interrupt loop. - */ - if (inb(EWRK3_FMQC)) { /* any resources available? */ - lp->irq_mask |= ICR_TXDM | ICR_RXDM; /* enable the interrupt source */ - csr &= ~(CSR_TXD | CSR_RXD); /* ensure restart of a stalled TX or RX */ - outb(csr, EWRK3_CSR); - netif_wake_queue(dev); - } else { - lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM); /* disable the interrupt source */ - } - - /* Unmask the EWRK3 board interrupts and turn off the LED */ - cr &= ~(lp->led_mask); - outb(cr, EWRK3_CR); - ENABLE_IRQs; - spin_unlock(&lp->hw_lock); - return IRQ_HANDLED; -} - -/* Called with lp->hw_lock held */ -static int ewrk3_rx(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int i, status = 0; - u_char page; - void __iomem *buf = NULL; - - while (inb(EWRK3_RQC) && !status) { /* Whilst there's incoming data */ - if ((page = inb(EWRK3_RQ)) < lp->mPage) { /* Get next entry's buffer page */ - /* - ** Set up shared memory window and pointer into the window - */ - if (lp->shmem_length == IO_ONLY) { - outb(page, EWRK3_IOPR); - } else if (lp->shmem_length == SHMEM_2K) { - buf = lp->shmem; - outb(page, EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_32K) { - buf = (((short) page << 11) & 0x7800) + lp->shmem; - outb((page >> 4), EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_64K) { - buf = (((short) page << 11) & 0xf800) + lp->shmem; - outb((page >> 5), EWRK3_MPR); - } else { - status = -1; - printk("%s: Oops - your private data area is hosed!\n", dev->name); - } - - if (!status) { - char rx_status; - int pkt_len; - - if (lp->shmem_length == IO_ONLY) { - rx_status = inb(EWRK3_DATA); - pkt_len = inb(EWRK3_DATA); - pkt_len |= ((u_short) inb(EWRK3_DATA) << 8); - } else { - rx_status = readb(buf); - buf += 1; - pkt_len = readw(buf); - buf += 3; - } - - if (!(rx_status & R_ROK)) { /* There was an error. */ - dev->stats.rx_errors++; /* Update the error stats. */ - if (rx_status & R_DBE) - dev->stats.rx_frame_errors++; - if (rx_status & R_CRC) - dev->stats.rx_crc_errors++; - if (rx_status & R_PLL) - dev->stats.rx_fifo_errors++; - } else { - struct sk_buff *skb; - skb = netdev_alloc_skb(dev, - pkt_len + 2); - - if (skb != NULL) { - unsigned char *p; - skb_reserve(skb, 2); /* Align to 16 bytes */ - p = skb_put(skb, pkt_len); - - if (lp->shmem_length == IO_ONLY) { - *p = inb(EWRK3_DATA); /* dummy read */ - for (i = 0; i < pkt_len; i++) { - *p++ = inb(EWRK3_DATA); - } - } else { - memcpy_fromio(p, buf, pkt_len); - } - - for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) { - if (pkt_len < i * EWRK3_PKT_BIN_SZ) { - lp->pktStats.bins[i]++; - i = EWRK3_PKT_STAT_SZ; - } - } - p = skb->data; /* Look at the dest addr */ - if (is_multicast_ether_addr(p)) { - if (is_broadcast_ether_addr(p)) { - lp->pktStats.broadcast++; - } else { - lp->pktStats.multicast++; - } - } else if (ether_addr_equal(p, - dev->dev_addr)) { - lp->pktStats.unicast++; - } - lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ - if (lp->pktStats.bins[0] == 0) { /* Reset counters */ - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - } - /* - ** Notify the upper protocol layers that there is another - ** packet to handle - */ - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - - /* - ** Update stats - */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } else { - printk("%s: Insufficient memory; nuking packet.\n", dev->name); - dev->stats.rx_dropped++; /* Really, deferred. */ - break; - } - } - } - /* - ** Return the received buffer to the free memory queue - */ - outb(page, EWRK3_FMQ); - } else { - printk("ewrk3_rx(): Illegal page number, page %d\n", page); - printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC)); - } - } - return status; -} - -/* -** Buffer sent - check for TX buffer errors. -** Called with lp->hw_lock held -*/ -static int ewrk3_tx(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char tx_status; - - while ((tx_status = inb(EWRK3_TDQ)) > 0) { /* Whilst there's old buffers */ - if (tx_status & T_VSTS) { /* The status is valid */ - if (tx_status & T_TXE) { - dev->stats.tx_errors++; - if (tx_status & T_NCL) - dev->stats.tx_carrier_errors++; - if (tx_status & T_LCL) - dev->stats.tx_window_errors++; - if (tx_status & T_CTU) { - if ((tx_status & T_COLL) ^ T_XUR) { - lp->pktStats.tx_underruns++; - } else { - lp->pktStats.excessive_underruns++; - } - } else if (tx_status & T_COLL) { - if ((tx_status & T_COLL) ^ T_XCOLL) { - dev->stats.collisions++; - } else { - lp->pktStats.excessive_collisions++; - } - } - } else { - dev->stats.tx_packets++; - } - } - } - - return 0; -} - -static int ewrk3_close(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char icr, csr; - - netif_stop_queue(dev); - - if (ewrk3_debug > 1) { - printk("%s: Shutting down ethercard, status was %2.2x.\n", - dev->name, inb(EWRK3_CSR)); - } - /* - ** We stop the EWRK3 here... mask interrupts and stop TX & RX - */ - DISABLE_IRQs; - - STOP_EWRK3; - - /* - ** Clean out the TX and RX queues here (note that one entry - ** may get added to either the TXD or RX queues if the TX or RX - ** just starts processing a packet before the STOP_EWRK3 command - ** is received. This will be flushed in the ewrk3_open() call). - */ - while (inb(EWRK3_TQ)); - while (inb(EWRK3_TDQ)); - while (inb(EWRK3_RQ)); - - if (!lp->hard_strapped) { - free_irq(dev->irq, dev); - } - return 0; -} - -/* - ** Set or clear the multicast filter for this adapter. - */ -static void set_multicast_list(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char csr; - - csr = inb(EWRK3_CSR); - - if (lp->shmem_length == IO_ONLY) { - lp->mctbl = NULL; - } else { - lp->mctbl = lp->shmem + PAGE0_HTE; - } - - csr &= ~(CSR_PME | CSR_MCE); - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - csr |= CSR_PME; - outb(csr, EWRK3_CSR); - } else { - SetMulticastFilter(dev); - csr |= CSR_MCE; - outb(csr, EWRK3_CSR); - } -} - -/* - ** Calculate the hash code and update the logical address filter - ** from a list of ethernet multicast addresses. - ** Little endian crc one liner from Matt Thomas, DEC. - ** - ** Note that when clearing the table, the broadcast bit must remain asserted - ** to receive broadcast messages. - */ -static void SetMulticastFilter(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - struct netdev_hw_addr *ha; - u_long iobase = dev->base_addr; - int i; - char bit, byte; - short __iomem *p = lp->mctbl; - u16 hashcode; - u32 crc; - - spin_lock_irq(&lp->hw_lock); - - if (lp->shmem_length == IO_ONLY) { - outb(0, EWRK3_IOPR); - outw(PAGE0_HTE, EWRK3_PIR1); - } else { - outb(0, EWRK3_MPR); - } - - if (dev->flags & IFF_ALLMULTI) { - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { - if (lp->shmem_length == IO_ONLY) { - outb(0xff, EWRK3_DATA); - } else { /* memset didn't work here */ - writew(0xffff, p); - p++; - i++; - } - } - } else { - /* Clear table except for broadcast bit */ - if (lp->shmem_length == IO_ONLY) { - for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) { - outb(0x00, EWRK3_DATA); - } - outb(0x80, EWRK3_DATA); - i++; /* insert the broadcast bit */ - for (; i < (HASH_TABLE_LEN >> 3); i++) { - outb(0x00, EWRK3_DATA); - } - } else { - memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3); - writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1); - } - - /* Update table */ - netdev_for_each_mc_addr(ha, dev) { - crc = ether_crc_le(ETH_ALEN, ha->addr); - hashcode = crc & ((1 << 9) - 1); /* hashcode is 9 LSb of CRC */ - - byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ - bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */ - - if (lp->shmem_length == IO_ONLY) { - u_char tmp; - - outw(PAGE0_HTE + byte, EWRK3_PIR1); - tmp = inb(EWRK3_DATA); - tmp |= bit; - outw(PAGE0_HTE + byte, EWRK3_PIR1); - outb(tmp, EWRK3_DATA); - } else { - writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte); - } - } - } - - spin_unlock_irq(&lp->hw_lock); -} - -/* - ** ISA bus I/O device probe - */ -static int __init isa_probe(struct net_device *dev, u_long ioaddr) -{ - int i = num_ewrks3s, maxSlots; - int ret = -ENODEV; - - u_long iobase; - - if (ioaddr >= 0x400) - goto out; - - if (ioaddr == 0) { /* Autoprobing */ - iobase = EWRK3_IO_BASE; /* Get the first slot address */ - maxSlots = 24; - } else { /* Probe a specific location */ - iobase = ioaddr; - maxSlots = i + 1; - } - - for (; (i < maxSlots) && (dev != NULL); - iobase += EWRK3_IOP_INC, i++) - { - if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) { - if (DevicePresent(iobase) == 0) { - int irq = dev->irq; - ret = ewrk3_hw_init(dev, iobase); - if (!ret) - break; - dev->irq = irq; - } - release_region(iobase, EWRK3_TOTAL_SIZE); - } - } - out: - - return ret; -} - -/* - ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually - ** the motherboard. - */ -static int __init eisa_probe(struct net_device *dev, u_long ioaddr) -{ - int i, maxSlots; - u_long iobase; - int ret = -ENODEV; - - if (ioaddr < 0x1000) - goto out; - - iobase = ioaddr; - i = (ioaddr >> 12); - maxSlots = i + 1; - - for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) { - if (EISA_signature(name, EISA_ID) == 0) { - if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) && - DevicePresent(iobase) == 0) { - int irq = dev->irq; - ret = ewrk3_hw_init(dev, iobase); - if (!ret) - break; - dev->irq = irq; - } - release_region(iobase, EWRK3_TOTAL_SIZE); - } - } - - out: - return ret; -} - - -/* - ** Read the EWRK3 EEPROM using this routine - */ -static int Read_EEPROM(u_long iobase, u_char eaddr) -{ - int i; - - outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ - outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */ - for (i = 0; i < 5000; i++) - inb(EWRK3_CSR); /* wait 1msec */ - - return inw(EWRK3_EPROM1); /* 16 bits data return */ -} - -/* - ** Write the EWRK3 EEPROM using this routine - */ -static int Write_EEPROM(short data, u_long iobase, u_char eaddr) -{ - int i; - - outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */ - for (i = 0; i < 5000; i++) - inb(EWRK3_CSR); /* wait 1msec */ - outw(data, EWRK3_EPROM1); /* write data to register */ - outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ - outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */ - for (i = 0; i < 75000; i++) - inb(EWRK3_CSR); /* wait 15msec */ - outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */ - for (i = 0; i < 5000; i++) - inb(EWRK3_CSR); /* wait 1msec */ - - return 0; -} - -/* - ** Look for a particular board name in the on-board EEPROM. - */ -static void __init EthwrkSignature(char *name, char *eeprom_image) -{ - int i; - char *signatures[] = EWRK3_SIGNATURE; - - for (i=0; *signatures[i] != '\0'; i++) - if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) ) - break; - - if (*signatures[i] != '\0') { - memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN); - name[EWRK3_STRLEN] = '\0'; - } else - name[0] = '\0'; -} - -/* - ** Look for a special sequence in the Ethernet station address PROM that - ** is common across all EWRK3 products. - ** - ** Search the Ethernet address ROM for the signature. Since the ROM address - ** counter can start at an arbitrary point, the search must include the entire - ** probe sequence length plus the (length_of_the_signature - 1). - ** Stop the search IMMEDIATELY after the signature is found so that the - ** PROM address counter is correctly positioned at the start of the - ** ethernet address for later read out. - */ - -static int __init DevicePresent(u_long iobase) -{ - union { - struct { - u32 a; - u32 b; - } llsig; - char Sig[sizeof(u32) << 1]; - } - dev; - short sigLength; - char data; - int i, j, status = 0; - - dev.llsig.a = ETH_PROM_SIG; - dev.llsig.b = ETH_PROM_SIG; - sigLength = sizeof(u32) << 1; - - for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) { - data = inb(EWRK3_APROM); - if (dev.Sig[j] == data) { /* track signature */ - j++; - } else { /* lost signature; begin search again */ - if (data == dev.Sig[0]) { - j = 1; - } else { - j = 0; - } - } - } - - if (j != sigLength) { - status = -ENODEV; /* search failed */ - } - return status; -} - -static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType) -{ - int i, j, k; - u_short chksum; - u_char crc, lfsr, sd, status = 0; - u_long iobase = dev->base_addr; - u16 tmp; - - if (chipType == LeMAC2) { - for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) { - sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j]; - outb(dev->dev_addr[j], EWRK3_PAR0 + j); - for (k = 0; k < 8; k++, sd >>= 1) { - lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7; - crc = (crc >> 1) + lfsr; - } - } - if (crc != eeprom_image[EEPROM_PA_CRC]) - status = -1; - } else { - for (i = 0, k = 0; i < ETH_ALEN;) { - k <<= 1; - if (k > 0xffff) - k -= 0xffff; - - k += (u_char) (tmp = inb(EWRK3_APROM)); - dev->dev_addr[i] = (u_char) tmp; - outb(dev->dev_addr[i], EWRK3_PAR0 + i); - i++; - k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8); - dev->dev_addr[i] = (u_char) tmp; - outb(dev->dev_addr[i], EWRK3_PAR0 + i); - i++; - - if (k > 0xffff) - k -= 0xffff; - } - if (k == 0xffff) - k = 0; - chksum = inb(EWRK3_APROM); - chksum |= (inb(EWRK3_APROM) << 8); - if (k != chksum) - status = -1; - } - - return status; -} - -/* - ** Look for a particular board name in the EISA configuration space - */ -static int __init EISA_signature(char *name, s32 eisa_id) -{ - u_long i; - char *signatures[] = EWRK3_SIGNATURE; - char ManCode[EWRK3_STRLEN]; - union { - s32 ID; - char Id[4]; - } Eisa; - int status = 0; - - *name = '\0'; - for (i = 0; i < 4; i++) { - Eisa.Id[i] = inb(eisa_id + i); - } - - ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40); - ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40); - ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30); - ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30); - ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30); - ManCode[5] = '\0'; - - for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) { - if (strstr(ManCode, signatures[i]) != NULL) { - strcpy(name, ManCode); - status = 1; - } - } - - return status; /* return the device name string */ -} - -static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL); - - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->fw_version, sizeof(info->fw_version), "%d", fwrev); - strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); - info->eedump_len = EEPROM_MAX; -} - -static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct ewrk3_private *lp = netdev_priv(dev); - unsigned long iobase = dev->base_addr; - u8 cr = inb(EWRK3_CR); - - switch (lp->adapter_name[4]) { - case '3': /* DE203 */ - ecmd->supported = SUPPORTED_BNC; - ecmd->port = PORT_BNC; - break; - - case '4': /* DE204 */ - ecmd->supported = SUPPORTED_TP; - ecmd->port = PORT_TP; - break; - - case '5': /* DE205 */ - ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI; - ecmd->autoneg = !(cr & CR_APD); - /* - ** Port is only valid if autoneg is disabled - ** and even then we don't know if AUI is jumpered. - */ - if (!ecmd->autoneg) - ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP; - break; - } - - ecmd->supported |= SUPPORTED_10baseT_Half; - ethtool_cmd_speed_set(ecmd, SPEED_10); - ecmd->duplex = DUPLEX_HALF; - return 0; -} - -static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct ewrk3_private *lp = netdev_priv(dev); - unsigned long iobase = dev->base_addr; - unsigned long flags; - u8 cr; - - /* DE205 is the only card with anything to set */ - if (lp->adapter_name[4] != '5') - return -EOPNOTSUPP; - - /* Sanity-check parameters */ - if (ecmd->speed != SPEED_10) - return -EINVAL; - if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC) - return -EINVAL; /* AUI is not software-selectable */ - if (ecmd->transceiver != XCVR_INTERNAL) - return -EINVAL; - if (ecmd->duplex != DUPLEX_HALF) - return -EINVAL; - if (ecmd->phy_address != 0) - return -EINVAL; - - spin_lock_irqsave(&lp->hw_lock, flags); - cr = inb(EWRK3_CR); - - /* If Autoneg is set, change to Auto Port mode */ - /* Otherwise, disable Auto Port and set port explicitly */ - if (ecmd->autoneg) { - cr &= ~CR_APD; - } else { - cr |= CR_APD; - if (ecmd->port == PORT_TP) - cr &= ~CR_PSEL; /* Force TP */ - else - cr |= CR_PSEL; /* Force BNC */ - } - - /* Commit the changes */ - outb(cr, EWRK3_CR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - return 0; -} - -static u32 ewrk3_get_link(struct net_device *dev) -{ - unsigned long iobase = dev->base_addr; - u8 cmr = inb(EWRK3_CMR); - /* DE203 has BNC only and link status does not apply */ - /* On DE204 this is always valid since TP is the only port. */ - /* On DE205 this reflects TP status even if BNC or AUI is selected. */ - return !(cmr & CMR_LINK); -} - -static int ewrk3_set_phys_id(struct net_device *dev, - enum ethtool_phys_id_state state) -{ - struct ewrk3_private *lp = netdev_priv(dev); - unsigned long iobase = dev->base_addr; - u8 cr; - - spin_lock_irq(&lp->hw_lock); - - switch (state) { - case ETHTOOL_ID_ACTIVE: - /* Prevent ISR from twiddling the LED */ - lp->led_mask = 0; - spin_unlock_irq(&lp->hw_lock); - return 2; /* cycle on/off twice per second */ - - case ETHTOOL_ID_ON: - cr = inb(EWRK3_CR); - outb(cr | CR_LED, EWRK3_CR); - break; - - case ETHTOOL_ID_OFF: - cr = inb(EWRK3_CR); - outb(cr & ~CR_LED, EWRK3_CR); - break; - - case ETHTOOL_ID_INACTIVE: - lp->led_mask = CR_LED; - cr = inb(EWRK3_CR); - outb(cr & ~CR_LED, EWRK3_CR); - } - spin_unlock_irq(&lp->hw_lock); - - return 0; -} - -static const struct ethtool_ops ethtool_ops_203 = { - .get_drvinfo = ewrk3_get_drvinfo, - .get_settings = ewrk3_get_settings, - .set_settings = ewrk3_set_settings, - .set_phys_id = ewrk3_set_phys_id, -}; - -static const struct ethtool_ops ethtool_ops = { - .get_drvinfo = ewrk3_get_drvinfo, - .get_settings = ewrk3_get_settings, - .set_settings = ewrk3_set_settings, - .get_link = ewrk3_get_link, - .set_phys_id = ewrk3_set_phys_id, -}; - -/* - ** Perform IOCTL call functions here. Some are privileged operations and the - ** effective uid is checked in those cases. - */ -static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct ewrk3_private *lp = netdev_priv(dev); - struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru; - u_long iobase = dev->base_addr; - int i, j, status = 0; - u_char csr; - unsigned long flags; - union ewrk3_addr { - u_char addr[HASH_TABLE_LEN * ETH_ALEN]; - u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; - }; - - union ewrk3_addr *tmp; - - /* All we handle are private IOCTLs */ - if (cmd != EWRK3IOCTL) - return -EOPNOTSUPP; - - tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL); - if(tmp==NULL) - return -ENOMEM; - - switch (ioc->cmd) { - case EWRK3_GET_HWADDR: /* Get the hardware address */ - for (i = 0; i < ETH_ALEN; i++) { - tmp->addr[i] = dev->dev_addr[i]; - } - ioc->len = ETH_ALEN; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - break; - - case EWRK3_SET_HWADDR: /* Set the hardware address */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr |= (CSR_TXD | CSR_RXD); - outb(csr, EWRK3_CSR); /* Disable the TX and RX */ - spin_unlock_irqrestore(&lp->hw_lock, flags); - - if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) { - status = -EFAULT; - break; - } - spin_lock_irqsave(&lp->hw_lock, flags); - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = tmp->addr[i]; - outb(tmp->addr[i], EWRK3_PAR0 + i); - } - - csr = inb(EWRK3_CSR); - csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */ - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_SET_PROM: /* Set Promiscuous Mode */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr |= CSR_PME; - csr &= ~CSR_MCE; - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_CLR_PROM: /* Clear Promiscuous Mode */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr &= ~CSR_PME; - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_MCA: /* Get the multicast address table */ - spin_lock_irqsave(&lp->hw_lock, flags); - if (lp->shmem_length == IO_ONLY) { - outb(0, EWRK3_IOPR); - outw(PAGE0_HTE, EWRK3_PIR1); - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { - tmp->addr[i] = inb(EWRK3_DATA); - } - } else { - outb(0, EWRK3_MPR); - memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3)); - } - spin_unlock_irqrestore(&lp->hw_lock, flags); - - ioc->len = (HASH_TABLE_LEN >> 3); - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - - break; - case EWRK3_SET_MCA: /* Set a multicast address */ - if (capable(CAP_NET_ADMIN)) { - if (ioc->len > HASH_TABLE_LEN) { - status = -EINVAL; - break; - } - if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) { - status = -EFAULT; - break; - } - set_multicast_list(dev); - } else { - status = -EPERM; - } - - break; - case EWRK3_CLR_MCA: /* Clear all multicast addresses */ - if (capable(CAP_NET_ADMIN)) { - set_multicast_list(dev); - } else { - status = -EPERM; - } - - break; - case EWRK3_MCA_EN: /* Enable multicast addressing */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr |= CSR_MCE; - csr &= ~CSR_PME; - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_STATS: { /* Get the driver statistics */ - struct ewrk3_stats *tmp_stats = - kmalloc(sizeof(lp->pktStats), GFP_KERNEL); - if (!tmp_stats) { - status = -ENOMEM; - break; - } - - spin_lock_irqsave(&lp->hw_lock, flags); - memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->hw_lock, flags); - - ioc->len = sizeof(lp->pktStats); - if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats))) - status = -EFAULT; - kfree(tmp_stats); - break; - } - case EWRK3_CLR_STATS: /* Zero out the driver statistics */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->hw_lock,flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_CSR: /* Get the CSR Register contents */ - tmp->addr[0] = inb(EWRK3_CSR); - ioc->len = 1; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - break; - case EWRK3_SET_CSR: /* Set the CSR Register contents */ - if (capable(CAP_NET_ADMIN)) { - if (copy_from_user(tmp->addr, ioc->data, 1)) { - status = -EFAULT; - break; - } - outb(tmp->addr[0], EWRK3_CSR); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_EEPROM: /* Get the EEPROM contents */ - if (capable(CAP_NET_ADMIN)) { - for (i = 0; i < (EEPROM_MAX >> 1); i++) { - tmp->val[i] = (short) Read_EEPROM(iobase, i); - } - i = EEPROM_MAX; - tmp->addr[i++] = inb(EWRK3_CMR); /* Config/Management Reg. */ - for (j = 0; j < ETH_ALEN; j++) { - tmp->addr[i++] = inb(EWRK3_PAR0 + j); - } - ioc->len = EEPROM_MAX + 1 + ETH_ALEN; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - } else { - status = -EPERM; - } - - break; - case EWRK3_SET_EEPROM: /* Set the EEPROM contents */ - if (capable(CAP_NET_ADMIN)) { - if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) { - status = -EFAULT; - break; - } - for (i = 0; i < (EEPROM_MAX >> 1); i++) { - Write_EEPROM(tmp->val[i], iobase, i); - } - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_CMR: /* Get the CMR Register contents */ - tmp->addr[0] = inb(EWRK3_CMR); - ioc->len = 1; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - break; - case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */ - if (capable(CAP_NET_ADMIN)) { - lp->txc = 1; - } else { - status = -EPERM; - } - - break; - case EWRK3_CLR_TX_CUT_THRU: /* Clear TX cut through mode */ - if (capable(CAP_NET_ADMIN)) { - lp->txc = 0; - } else { - status = -EPERM; - } - - break; - default: - status = -EOPNOTSUPP; - } - kfree(tmp); - return status; -} - -#ifdef MODULE -static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S]; -static int ndevs; -static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, }; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, byte, NULL, 0); -MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)"); - -static __exit void ewrk3_exit_module(void) -{ - int i; - - for( i=0; ibase_addr, EWRK3_TOTAL_SIZE); - iounmap(lp->shmem); - free_netdev(dev); - } -} - -static __init int ewrk3_init_module(void) -{ - int i=0; - - while( io[i] && irq[i] ) { - struct net_device *dev - = alloc_etherdev(sizeof(struct ewrk3_private)); - - if (!dev) - break; - - if (ewrk3_probe1(dev, io[i], irq[i]) != 0) { - free_netdev(dev); - break; - } - - ewrk3_devs[ndevs++] = dev; - i++; - } - - return ndevs ? 0 : -EIO; -} - - -/* Hack for breakage in new module stuff */ -module_exit(ewrk3_exit_module); -module_init(ewrk3_init_module); -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dec/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h deleted file mode 100644 index 8e0ee90..0000000 --- a/drivers/net/ethernet/dec/ewrk3.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - Written 1994 by David C. Davies. - - Copyright 1994 Digital Equipment Corporation. - - This software may be used and distributed according to the terms of the - GNU General Public License, incorporated herein by reference. - - The author may be reached as davies@wanton.lkg.dec.com or Digital - Equipment Corporation, 550 King Street, Littleton MA 01460. - - ========================================================================= -*/ - -/* -** I/O Address Register Map -*/ -#define EWRK3_CSR iobase+0x00 /* Control and Status Register */ -#define EWRK3_CR iobase+0x01 /* Control Register */ -#define EWRK3_ICR iobase+0x02 /* Interrupt Control Register */ -#define EWRK3_TSR iobase+0x03 /* Transmit Status Register */ -#define EWRK3_RSVD1 iobase+0x04 /* RESERVED */ -#define EWRK3_RSVD2 iobase+0x05 /* RESERVED */ -#define EWRK3_FMQ iobase+0x06 /* Free Memory Queue */ -#define EWRK3_FMQC iobase+0x07 /* Free Memory Queue Counter */ -#define EWRK3_RQ iobase+0x08 /* Receive Queue */ -#define EWRK3_RQC iobase+0x09 /* Receive Queue Counter */ -#define EWRK3_TQ iobase+0x0a /* Transmit Queue */ -#define EWRK3_TQC iobase+0x0b /* Transmit Queue Counter */ -#define EWRK3_TDQ iobase+0x0c /* Transmit Done Queue */ -#define EWRK3_TDQC iobase+0x0d /* Transmit Done Queue Counter */ -#define EWRK3_PIR1 iobase+0x0e /* Page Index Register 1 */ -#define EWRK3_PIR2 iobase+0x0f /* Page Index Register 2 */ -#define EWRK3_DATA iobase+0x10 /* Data Register */ -#define EWRK3_IOPR iobase+0x11 /* I/O Page Register */ -#define EWRK3_IOBR iobase+0x12 /* I/O Base Register */ -#define EWRK3_MPR iobase+0x13 /* Memory Page Register */ -#define EWRK3_MBR iobase+0x14 /* Memory Base Register */ -#define EWRK3_APROM iobase+0x15 /* Address PROM */ -#define EWRK3_EPROM1 iobase+0x16 /* EEPROM Data Register 1 */ -#define EWRK3_EPROM2 iobase+0x17 /* EEPROM Data Register 2 */ -#define EWRK3_PAR0 iobase+0x18 /* Physical Address Register 0 */ -#define EWRK3_PAR1 iobase+0x19 /* Physical Address Register 1 */ -#define EWRK3_PAR2 iobase+0x1a /* Physical Address Register 2 */ -#define EWRK3_PAR3 iobase+0x1b /* Physical Address Register 3 */ -#define EWRK3_PAR4 iobase+0x1c /* Physical Address Register 4 */ -#define EWRK3_PAR5 iobase+0x1d /* Physical Address Register 5 */ -#define EWRK3_CMR iobase+0x1e /* Configuration/Management Register */ - -/* -** Control Page Map -*/ -#define PAGE0_FMQ 0x000 /* Free Memory Queue */ -#define PAGE0_RQ 0x080 /* Receive Queue */ -#define PAGE0_TQ 0x100 /* Transmit Queue */ -#define PAGE0_TDQ 0x180 /* Transmit Done Queue */ -#define PAGE0_HTE 0x200 /* Hash Table Entries */ -#define PAGE0_RSVD 0x240 /* RESERVED */ -#define PAGE0_USRD 0x600 /* User Data */ - -/* -** Control and Status Register bit definitions (EWRK3_CSR) -*/ -#define CSR_RA 0x80 /* Runt Accept */ -#define CSR_PME 0x40 /* Promiscuous Mode Enable */ -#define CSR_MCE 0x20 /* Multicast Enable */ -#define CSR_TNE 0x08 /* TX Done Queue Not Empty */ -#define CSR_RNE 0x04 /* RX Queue Not Empty */ -#define CSR_TXD 0x02 /* TX Disable */ -#define CSR_RXD 0x01 /* RX Disable */ - -/* -** Control Register bit definitions (EWRK3_CR) -*/ -#define CR_APD 0x80 /* Auto Port Disable */ -#define CR_PSEL 0x40 /* Port Select (0->TP port) */ -#define CR_LBCK 0x20 /* LoopBaCK enable */ -#define CR_FDUP 0x10 /* Full DUPlex enable */ -#define CR_FBUS 0x08 /* Fast BUS enable (ISA clk > 8.33MHz) */ -#define CR_EN_16 0x04 /* ENable 16 bit memory accesses */ -#define CR_LED 0x02 /* LED (1-> turn on) */ - -/* -** Interrupt Control Register bit definitions (EWRK3_ICR) -*/ -#define ICR_IE 0x80 /* Interrupt Enable */ -#define ICR_IS 0x60 /* Interrupt Selected */ -#define ICR_TNEM 0x08 /* TNE Mask (0->mask) */ -#define ICR_RNEM 0x04 /* RNE Mask (0->mask) */ -#define ICR_TXDM 0x02 /* TXD Mask (0->mask) */ -#define ICR_RXDM 0x01 /* RXD Mask (0->mask) */ - -/* -** Transmit Status Register bit definitions (EWRK3_TSR) -*/ -#define TSR_NCL 0x80 /* No Carrier Loopback */ -#define TSR_ID 0x40 /* Initially Deferred */ -#define TSR_LCL 0x20 /* Late CoLlision */ -#define TSR_ECL 0x10 /* Excessive CoLlisions */ -#define TSR_RCNTR 0x0f /* Retries CouNTeR */ - -/* -** I/O Page Register bit definitions (EWRK3_IOPR) -*/ -#define EEPROM_INIT 0xc0 /* EEPROM INIT command */ -#define EEPROM_WR_EN 0xc8 /* EEPROM WRITE ENABLE command */ -#define EEPROM_WR 0xd0 /* EEPROM WRITE command */ -#define EEPROM_WR_DIS 0xd8 /* EEPROM WRITE DISABLE command */ -#define EEPROM_RD 0xe0 /* EEPROM READ command */ - -/* -** I/O Base Register bit definitions (EWRK3_IOBR) -*/ -#define EISA_REGS_EN 0x20 /* Enable EISA ID and Control Registers */ -#define EISA_IOB 0x1f /* Compare bits for I/O Base Address */ - -/* -** I/O Configuration/Management Register bit definitions (EWRK3_CMR) -*/ -#define CMR_RA 0x80 /* Read Ahead */ -#define CMR_WB 0x40 /* Write Behind */ -#define CMR_LINK 0x20 /* 0->TP */ -#define CMR_POLARITY 0x10 /* Informational */ -#define CMR_NO_EEPROM 0x0c /* NO_EEPROM<1:0> pin status */ -#define CMR_HS 0x08 /* Hard Strapped pin status (LeMAC2) */ -#define CMR_PNP 0x04 /* Plug 'n Play */ -#define CMR_DRAM 0x02 /* 0-> 1DRAM, 1-> 2 DRAM on board */ -#define CMR_0WS 0x01 /* Zero Wait State */ - -/* -** MAC Receive Status Register bit definitions -*/ - -#define R_ROK 0x80 /* Receive OK summary */ -#define R_IAM 0x10 /* Individual Address Match */ -#define R_MCM 0x08 /* MultiCast Match */ -#define R_DBE 0x04 /* Dribble Bit Error */ -#define R_CRC 0x02 /* CRC error */ -#define R_PLL 0x01 /* Phase Lock Lost */ - -/* -** MAC Transmit Control Register bit definitions -*/ - -#define TCR_SQEE 0x40 /* SQE Enable - look for heartbeat */ -#define TCR_SED 0x20 /* Stop when Error Detected */ -#define TCR_QMODE 0x10 /* Q_MODE */ -#define TCR_LAB 0x08 /* Less Aggressive Backoff */ -#define TCR_PAD 0x04 /* PAD Runt Packets */ -#define TCR_IFC 0x02 /* Insert Frame Check */ -#define TCR_ISA 0x01 /* Insert Source Address */ - -/* -** MAC Transmit Status Register bit definitions -*/ - -#define T_VSTS 0x80 /* Valid STatuS */ -#define T_CTU 0x40 /* Cut Through Used */ -#define T_SQE 0x20 /* Signal Quality Error */ -#define T_NCL 0x10 /* No Carrier Loopback */ -#define T_LCL 0x08 /* Late Collision */ -#define T_ID 0x04 /* Initially Deferred */ -#define T_COLL 0x03 /* COLLision status */ -#define T_XCOLL 0x03 /* Excessive Collisions */ -#define T_MCOLL 0x02 /* Multiple Collisions */ -#define T_OCOLL 0x01 /* One Collision */ -#define T_NOCOLL 0x00 /* No Collisions */ -#define T_XUR 0x03 /* Excessive Underruns */ -#define T_TXE 0x7f /* TX Errors */ - -/* -** EISA Configuration Register bit definitions -*/ - -#define EISA_ID iobase + 0x0c80 /* EISA ID Registers */ -#define EISA_ID0 iobase + 0x0c80 /* EISA ID Register 0 */ -#define EISA_ID1 iobase + 0x0c81 /* EISA ID Register 1 */ -#define EISA_ID2 iobase + 0x0c82 /* EISA ID Register 2 */ -#define EISA_ID3 iobase + 0x0c83 /* EISA ID Register 3 */ -#define EISA_CR iobase + 0x0c84 /* EISA Control Register */ - -/* -** EEPROM BYTES -*/ -#define EEPROM_MEMB 0x00 -#define EEPROM_IOB 0x01 -#define EEPROM_EISA_ID0 0x02 -#define EEPROM_EISA_ID1 0x03 -#define EEPROM_EISA_ID2 0x04 -#define EEPROM_EISA_ID3 0x05 -#define EEPROM_MISC0 0x06 -#define EEPROM_MISC1 0x07 -#define EEPROM_PNAME7 0x08 -#define EEPROM_PNAME6 0x09 -#define EEPROM_PNAME5 0x0a -#define EEPROM_PNAME4 0x0b -#define EEPROM_PNAME3 0x0c -#define EEPROM_PNAME2 0x0d -#define EEPROM_PNAME1 0x0e -#define EEPROM_PNAME0 0x0f -#define EEPROM_SWFLAGS 0x10 -#define EEPROM_HWCAT 0x11 -#define EEPROM_NETMAN2 0x12 -#define EEPROM_REVLVL 0x13 -#define EEPROM_NETMAN0 0x14 -#define EEPROM_NETMAN1 0x15 -#define EEPROM_CHIPVER 0x16 -#define EEPROM_SETUP 0x17 -#define EEPROM_PADDR0 0x18 -#define EEPROM_PADDR1 0x19 -#define EEPROM_PADDR2 0x1a -#define EEPROM_PADDR3 0x1b -#define EEPROM_PADDR4 0x1c -#define EEPROM_PADDR5 0x1d -#define EEPROM_PA_CRC 0x1e -#define EEPROM_CHKSUM 0x1f - -/* -** EEPROM bytes for checksumming -*/ -#define EEPROM_MAX 32 /* bytes */ - -/* -** EEPROM MISCELLANEOUS FLAGS -*/ -#define RBE_SHADOW 0x0100 /* Remote Boot Enable Shadow */ -#define READ_AHEAD 0x0080 /* Read Ahead feature */ -#define IRQ_SEL2 0x0070 /* IRQ line selection (LeMAC2) */ -#define IRQ_SEL 0x0060 /* IRQ line selection */ -#define FAST_BUS 0x0008 /* ISA Bus speeds > 8.33MHz */ -#define ENA_16 0x0004 /* Enables 16 bit memory transfers */ -#define WRITE_BEHIND 0x0002 /* Write Behind feature */ -#define _0WS_ENA 0x0001 /* Zero Wait State Enable */ - -/* -** EEPROM NETWORK MANAGEMENT FLAGS -*/ -#define NETMAN_POL 0x04 /* Polarity defeat */ -#define NETMAN_LINK 0x02 /* Link defeat */ -#define NETMAN_CCE 0x01 /* Custom Counters Enable */ - -/* -** EEPROM SW FLAGS -*/ -#define SW_SQE 0x10 /* Signal Quality Error */ -#define SW_LAB 0x08 /* Less Aggressive Backoff */ -#define SW_INIT 0x04 /* Initialized */ -#define SW_TIMEOUT 0x02 /* 0:2.5 mins, 1: 30 secs */ -#define SW_REMOTE 0x01 /* Remote Boot Enable -> 1 */ - -/* -** EEPROM SETUP FLAGS -*/ -#define SETUP_APD 0x80 /* AutoPort Disable */ -#define SETUP_PS 0x40 /* Port Select */ -#define SETUP_MP 0x20 /* MultiPort */ -#define SETUP_1TP 0x10 /* 1 port, TP */ -#define SETUP_1COAX 0x00 /* 1 port, Coax */ -#define SETUP_DRAM 0x02 /* Number of DRAMS on board */ - -/* -** EEPROM MANAGEMENT FLAGS -*/ -#define MGMT_CCE 0x01 /* Custom Counters Enable */ - -/* -** EEPROM VERSIONS -*/ -#define LeMAC 0x11 -#define LeMAC2 0x12 - -/* -** Miscellaneous -*/ - -#define EEPROM_WAIT_TIME 1000 /* Number of microseconds */ -#define EISA_EN 0x0001 /* Enable EISA bus buffers */ - -#define HASH_TABLE_LEN 512 /* Bits */ - -#define XCT 0x80 /* Transmit Cut Through */ -#define PRELOAD 16 /* 4 long words */ - -#define MASK_INTERRUPTS 1 -#define UNMASK_INTERRUPTS 0 - -#define EEPROM_OFFSET(a) ((u_short)((u_long)(a))) - -/* -** Include the IOCTL stuff -*/ -#include - -#define EWRK3IOCTL SIOCDEVPRIVATE - -struct ewrk3_ioctl { - unsigned short cmd; /* Command to run */ - unsigned short len; /* Length of the data buffer */ - unsigned char __user *data; /* Pointer to the data buffer */ -}; - -/* -** Recognised commands for the driver -*/ -#define EWRK3_GET_HWADDR 0x01 /* Get the hardware address */ -#define EWRK3_SET_HWADDR 0x02 /* Get the hardware address */ -#define EWRK3_SET_PROM 0x03 /* Set Promiscuous Mode */ -#define EWRK3_CLR_PROM 0x04 /* Clear Promiscuous Mode */ -#define EWRK3_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ -#define EWRK3_GET_MCA 0x06 /* Get a multicast address */ -#define EWRK3_SET_MCA 0x07 /* Set a multicast address */ -#define EWRK3_CLR_MCA 0x08 /* Clear a multicast address */ -#define EWRK3_MCA_EN 0x09 /* Enable a multicast address group */ -#define EWRK3_GET_STATS 0x0a /* Get the driver statistics */ -#define EWRK3_CLR_STATS 0x0b /* Zero out the driver statistics */ -#define EWRK3_GET_CSR 0x0c /* Get the CSR Register contents */ -#define EWRK3_SET_CSR 0x0d /* Set the CSR Register contents */ -#define EWRK3_GET_EEPROM 0x0e /* Get the EEPROM contents */ -#define EWRK3_SET_EEPROM 0x0f /* Set the EEPROM contents */ -#define EWRK3_GET_CMR 0x10 /* Get the CMR Register contents */ -#define EWRK3_CLR_TX_CUT_THRU 0x11 /* Clear the TX cut through mode */ -#define EWRK3_SET_TX_CUT_THRU 0x12 /* Set the TX cut through mode */ -- cgit v0.10.2 From 463d413cb7dcd5509bc01e1108c2e2dcf8104683 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 21 Jan 2013 19:13:26 -0500 Subject: drivers/net: delete old x86 variant of the seeq8005 driver The last update to the Ethernet HowTo (over 10 years ago) listed this: ------------------------ SEEQ 8005 Status: Obsolete, Driver Name: seeq8005 There is little information about the card included in the driver, and hence little information to be put here. If you have a question, you are probably best trying to e-mail the driver author as listed in the source. It was marked obsolete as of the 2.4 series kernels. ------------------------ If it was obsolete over a decade ago, the situation can not have improved with the passage of time, so let us act on that. Even with today's improved search engines, I was unable to locate any real meaningful information on the ISA implementation of this rare chip. There are ARM and SGI variants of the driver in tree, but they do not depend on the original x86 driver source or header file. We leave those non-x86 drivers to be deleted by the arch maintainers when they decide to expire those legacy platforms as a whole. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 9c30ea4..3a8c753 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -45,7 +45,6 @@ extern struct net_device *fmv18x_probe(int unit); extern struct net_device *i82596_probe(int unit); extern struct net_device *ni65_probe(int unit); extern struct net_device *sonic_probe(int unit); -extern struct net_device *seeq8005_probe(int unit); extern struct net_device *smc_init(int unit); extern struct net_device *atarilance_probe(int unit); extern struct net_device *sun3lance_probe(int unit); @@ -113,9 +112,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_SMC9194 {smc_init, 0}, #endif -#ifdef CONFIG_SEEQ8005 - {seeq8005_probe, 0}, -#endif #ifdef CONFIG_CS89x0 #ifndef CONFIG_CS89x0_PLATFORM {cs89x0_probe, 0}, diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig index 29f1853..a71e1ec 100644 --- a/drivers/net/ethernet/seeq/Kconfig +++ b/drivers/net/ethernet/seeq/Kconfig @@ -26,17 +26,6 @@ config ARM_ETHER3 If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. -config SEEQ8005 - tristate "SEEQ8005 support (EXPERIMENTAL)" - depends on EXPERIMENTAL - ---help--- - This is a driver for the SEEQ 8005 network (Ethernet) card. If this - is for you, read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called seeq8005. - config SGISEEQ tristate "SGI Seeq ethernet controller support" depends on SGI_HAS_SEEQ diff --git a/drivers/net/ethernet/seeq/Makefile b/drivers/net/ethernet/seeq/Makefile index 3e258a5..0488e99 100644 --- a/drivers/net/ethernet/seeq/Makefile +++ b/drivers/net/ethernet/seeq/Makefile @@ -3,5 +3,4 @@ # obj-$(CONFIG_ARM_ETHER3) += ether3.o -obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o diff --git a/drivers/net/ethernet/seeq/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c deleted file mode 100644 index d6e50de..0000000 --- a/drivers/net/ethernet/seeq/seeq8005.c +++ /dev/null @@ -1,749 +0,0 @@ -/* seeq8005.c: A network driver for linux. */ -/* - Based on skeleton.c, - Written 1993-94 by Donald Becker. - See the skeleton.c file for further copyright information. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as hamish@zot.apana.org.au - - This file is a network device driver for the SEEQ 8005 chipset and - the Linux operating system. - -*/ - -static const char version[] = - "seeq8005.c:v1.00 8/07/95 Hamish Coleman (hamish@zot.apana.org.au)\n"; - -/* - Sources: - SEEQ 8005 databook - - Version history: - 1.00 Public release. cosmetic changes (no warnings now) - 0.68 Turning per- packet,interrupt debug messages off - testing for release. - 0.67 timing problems/bad buffer reads seem to be fixed now - 0.63 *!@$ protocol=eth_type_trans -- now packets flow - 0.56 Send working - 0.48 Receive working -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "seeq8005.h" - -/* First, a few definitions that the brave might change. */ -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int seeq8005_portlist[] __initdata = - { 0x300, 0x320, 0x340, 0x360, 0}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -/* Information that need to be kept for each board. */ -struct net_local { - unsigned short receive_ptr; /* What address in packet memory do we expect a recv_pkt_header? */ - long open_time; /* Useless example local info. */ -}; - -/* The station (ethernet) address prefix, used for IDing the board. */ -#define SA_ADDR0 0x00 -#define SA_ADDR1 0x80 -#define SA_ADDR2 0x4b - -/* Index to functions, as function prototypes. */ - -static int seeq8005_probe1(struct net_device *dev, int ioaddr); -static int seeq8005_open(struct net_device *dev); -static void seeq8005_timeout(struct net_device *dev); -static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t seeq8005_interrupt(int irq, void *dev_id); -static void seeq8005_rx(struct net_device *dev); -static int seeq8005_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* Example routines you must write ;->. */ -#define tx_done(dev) (inw(SEEQ_STATUS) & SEEQSTAT_TX_ON) -static void hardware_send_packet(struct net_device *dev, char *buf, int length); -extern void seeq8005_init(struct net_device *dev, int startp); -static inline void wait_for_buffer(struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - */ - -static int io = 0x320; -static int irq = 10; - -struct net_device * __init seeq8005_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = seeq8005_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = seeq8005_portlist; *port; port++) { - if (seeq8005_probe1(dev, *port) == 0) - break; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, SEEQ8005_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops seeq8005_netdev_ops = { - .ndo_open = seeq8005_open, - .ndo_stop = seeq8005_close, - .ndo_start_xmit = seeq8005_send_packet, - .ndo_tx_timeout = seeq8005_timeout, - .ndo_set_rx_mode = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probes avoids doing writes, and - verifies that the correct device exists and functions. */ - -static int __init seeq8005_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned version_printed; - int i,j; - unsigned char SA_prom[32]; - int old_cfg1; - int old_cfg2; - int old_stat; - int old_dmaar; - int old_rear; - int retval; - - if (!request_region(ioaddr, SEEQ8005_IO_EXTENT, "seeq8005")) - return -ENODEV; - - if (net_debug>1) - printk("seeq8005: probing at 0x%x\n",ioaddr); - - old_stat = inw(SEEQ_STATUS); /* read status register */ - if (old_stat == 0xffff) { - retval = -ENODEV; - goto out; /* assume that 0xffff == no device */ - } - if ( (old_stat & 0x1800) != 0x1800 ) { /* assume that unused bits are 1, as my manual says */ - if (net_debug>1) { - printk("seeq8005: reserved stat bits != 0x1800\n"); - printk(" == 0x%04x\n",old_stat); - } - retval = -ENODEV; - goto out; - } - - old_rear = inw(SEEQ_REA); - if (old_rear == 0xffff) { - outw(0,SEEQ_REA); - if (inw(SEEQ_REA) == 0xffff) { /* assume that 0xffff == no device */ - retval = -ENODEV; - goto out; - } - } else if ((old_rear & 0xff00) != 0xff00) { /* assume that unused bits are 1 */ - if (net_debug>1) { - printk("seeq8005: unused rear bits != 0xff00\n"); - printk(" == 0x%04x\n",old_rear); - } - retval = -ENODEV; - goto out; - } - - old_cfg2 = inw(SEEQ_CFG2); /* read CFG2 register */ - old_cfg1 = inw(SEEQ_CFG1); - old_dmaar = inw(SEEQ_DMAAR); - - if (net_debug>4) { - printk("seeq8005: stat = 0x%04x\n",old_stat); - printk("seeq8005: cfg1 = 0x%04x\n",old_cfg1); - printk("seeq8005: cfg2 = 0x%04x\n",old_cfg2); - printk("seeq8005: raer = 0x%04x\n",old_rear); - printk("seeq8005: dmaar= 0x%04x\n",old_dmaar); - } - - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); /* setup for reading PROM */ - outw( 0, SEEQ_DMAAR); /* set starting PROM address */ - outw( SEEQCFG1_BUFFER_PROM, SEEQ_CFG1); /* set buffer to look at PROM */ - - - j=0; - for(i=0; i <32; i++) { - j+= SA_prom[i] = inw(SEEQ_BUFFER) & 0xff; - } - -#if 0 - /* untested because I only have the one card */ - if ( (j&0xff) != 0 ) { /* checksum appears to be 8bit = 0 */ - if (net_debug>1) { /* check this before deciding that we have a card */ - printk("seeq8005: prom sum error\n"); - } - outw( old_stat, SEEQ_STATUS); - outw( old_dmaar, SEEQ_DMAAR); - outw( old_cfg1, SEEQ_CFG1); - retval = -ENODEV; - goto out; - } -#endif - - outw( SEEQCFG2_RESET, SEEQ_CFG2); /* reset the card */ - udelay(5); - outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - - if (net_debug) { - printk("seeq8005: prom sum = 0x%08x\n",j); - for(j=0; j<32; j+=16) { - printk("seeq8005: prom %02x: ",j); - for(i=0;i<16;i++) { - printk("%02x ",SA_prom[j|i]); - } - printk(" "); - for(i=0;i<16;i++) { - if ((SA_prom[j|i]>31)&&(SA_prom[j|i]<127)) { - printk("%c", SA_prom[j|i]); - } else { - printk(" "); - } - } - printk("\n"); - } - } - -#if 0 - /* - * testing the packet buffer memory doesn't work yet - * but all other buffer accesses do - * - fixing is not a priority - */ - if (net_debug>1) { /* test packet buffer memory */ - printk("seeq8005: testing packet buffer ... "); - outw( SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0 , SEEQ_DMAAR); - for(i=0;i<32768;i++) { - outw(0x5a5a, SEEQ_BUFFER); - } - j=jiffies+HZ; - while ( ((inw(SEEQ_STATUS) & SEEQSTAT_FIFO_EMPTY) != SEEQSTAT_FIFO_EMPTY) && time_before(jiffies, j) ) - mb(); - outw( 0 , SEEQ_DMAAR); - while ( ((inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, j+HZ)) - mb(); - if ( (inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) - outw( SEEQCMD_WINDOW_INT_ACK | (inw(SEEQ_STATUS)& SEEQCMD_INT_MASK), SEEQ_CMD); - outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - j=0; - for(i=0;i<32768;i++) { - if (inw(SEEQ_BUFFER) != 0x5a5a) - j++; - } - if (j) { - printk("%i\n",j); - } else { - printk("ok.\n"); - } - } -#endif - - if (net_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s found at %#3x, ", dev->name, "seeq8005", ioaddr); - - /* Fill in the 'dev' fields. */ - dev->base_addr = ioaddr; - dev->irq = irq; - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i+6]; - printk("%pM", dev->dev_addr); - - if (dev->irq == 0xff) - ; /* Do nothing: a user-level program will set it. */ - else if (dev->irq < 2) { /* "Auto-IRQ" */ - unsigned long cookie = probe_irq_on(); - - outw( SEEQCMD_RX_INT_EN | SEEQCMD_SET_RX_ON | SEEQCMD_SET_RX_OFF, SEEQ_CMD ); - - dev->irq = probe_irq_off(cookie); - - if (net_debug >= 2) - printk(" autoirq is %d\n", dev->irq); - } else if (dev->irq == 2) - /* Fixup for users that don't know that IRQ 2 is really IRQ 9, - * or don't know which one to set. - */ - dev->irq = 9; - -#if 0 - { - int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); - if (irqval) { - printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, - dev->irq, irqval); - retval = -EAGAIN; - goto out; - } - } -#endif - dev->netdev_ops = &seeq8005_netdev_ops; - dev->watchdog_timeo = HZ/20; - dev->flags &= ~IFF_MULTICAST; - - return 0; -out: - release_region(ioaddr, SEEQ8005_IO_EXTENT); - return retval; -} - - -/* Open/initialize the board. This is called (in the current kernel) - sometime after booting when the 'ifconfig' program is run. - - This routine should set everything up anew at each open, even - registers that "should" only need to be set once at boot, so that - there is non-reboot way to recover if something goes wrong. - */ -static int seeq8005_open(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - { - int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); - if (irqval) { - printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, - dev->irq, irqval); - return -EAGAIN; - } - } - - /* Reset the hardware here. Don't forget to set the station address. */ - seeq8005_init(dev, 1); - - lp->open_time = jiffies; - - netif_start_queue(dev); - return 0; -} - -static void seeq8005_timeout(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict" : "network cable problem"); - /* Try to restart the adaptor. */ - seeq8005_init(dev, 1); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - short length = skb->len; - unsigned char *buf; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - buf = skb->data; - - /* Block a timer-based transmit from overlapping */ - netif_stop_queue(dev); - - hardware_send_packet(dev, buf, length); - dev->stats.tx_bytes += length; - dev_kfree_skb (skb); - /* You might need to clean up and record Tx statistics here. */ - - return NETDEV_TX_OK; -} - -/* - * wait_for_buffer - * - * This routine waits for the SEEQ chip to assert that the FIFO is ready - * by checking for a window interrupt, and then clearing it. This has to - * occur in the interrupt handler! - */ -inline void wait_for_buffer(struct net_device * dev) -{ - int ioaddr = dev->base_addr; - unsigned long tmp; - int status; - - tmp = jiffies + HZ; - while ( ( ((status=inw(SEEQ_STATUS)) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, tmp)) - cpu_relax(); - - if ( (status & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) - outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t seeq8005_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status, boguscount = 0; - int handled = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - status = inw(SEEQ_STATUS); - do { - if (net_debug >2) { - printk("%s: int, status=0x%04x\n",dev->name,status); - } - - if (status & SEEQSTAT_WINDOW_INT) { - handled = 1; - outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - if (net_debug) { - printk("%s: window int!\n",dev->name); - } - } - if (status & SEEQSTAT_TX_INT) { - handled = 1; - outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - dev->stats.tx_packets++; - netif_wake_queue(dev); /* Inform upper layers. */ - } - if (status & SEEQSTAT_RX_INT) { - handled = 1; - /* Got a packet(s). */ - seeq8005_rx(dev); - } - status = inw(SEEQ_STATUS); - } while ( (++boguscount < 10) && (status & SEEQSTAT_ANY_INT)) ; - - if(net_debug>2) { - printk("%s: eoi\n",dev->name); - } - return IRQ_RETVAL(handled); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void seeq8005_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int boguscount = 10; - int pkt_hdr; - int ioaddr = dev->base_addr; - - do { - int next_packet; - int pkt_len; - int i; - int status; - - status = inw(SEEQ_STATUS); - outw( lp->receive_ptr, SEEQ_DMAAR); - outw(SEEQCMD_FIFO_READ | SEEQCMD_RX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - wait_for_buffer(dev); - next_packet = ntohs(inw(SEEQ_BUFFER)); - pkt_hdr = inw(SEEQ_BUFFER); - - if (net_debug>2) { - printk("%s: 0x%04x recv next=0x%04x, hdr=0x%04x\n",dev->name,lp->receive_ptr,next_packet,pkt_hdr); - } - - if ((next_packet == 0) || ((pkt_hdr & SEEQPKTH_CHAIN)==0)) { /* Read all the frames? */ - return; /* Done for now */ - } - - if ((pkt_hdr & SEEQPKTS_DONE)==0) - break; - - if (next_packet < lp->receive_ptr) { - pkt_len = (next_packet + 0x10000 - ((DEFAULT_TEA+1)<<8)) - lp->receive_ptr - 4; - } else { - pkt_len = next_packet - lp->receive_ptr - 4; - } - - if (next_packet < ((DEFAULT_TEA+1)<<8)) { /* is the next_packet address sane? */ - printk("%s: recv packet ring corrupt, resetting board\n",dev->name); - seeq8005_init(dev,1); - return; - } - - lp->receive_ptr = next_packet; - - if (net_debug>2) { - printk("%s: recv len=0x%04x\n",dev->name,pkt_len); - } - - if (pkt_hdr & SEEQPKTS_ANY_ERROR) { /* There was an error. */ - dev->stats.rx_errors++; - if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++; - if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++; - if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++; - if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++; - /* skip over this packet */ - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA); - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - unsigned char *buf; - - skb = netdev_alloc_skb(dev, pkt_len); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb, 2); /* align data on 16 byte */ - buf = skb_put(skb,pkt_len); - - insw(SEEQ_BUFFER, buf, (pkt_len + 1) >> 1); - - if (net_debug>2) { - char * p = buf; - printk("%s: recv ",dev->name); - for(i=0;i<14;i++) { - printk("%02x ",*(p++)&0xff); - } - printk("\n"); - } - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - } while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN)); - - /* If any worth-while packets have been received, netif_rx() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ -} - -/* The inverse routine to net_open(). */ -static int seeq8005_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - lp->open_time = 0; - - netif_stop_queue(dev); - - /* Flush the Tx and disable Rx here. */ - outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - - free_irq(dev->irq, dev); - - /* Update the statistics here. */ - - return 0; - -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. - */ -static void set_multicast_list(struct net_device *dev) -{ -/* - * I _could_ do up to 6 addresses here, but won't (yet?) - */ - -#if 0 - int ioaddr = dev->base_addr; -/* - * hmm, not even sure if my matching works _anyway_ - seem to be receiving - * _everything_ . . . - */ - - if (num_addrs) { /* Enable promiscuous mode */ - outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_ALL, SEEQ_CFG1); - dev->flags|=IFF_PROMISC; - } else { /* Disable promiscuous mode, use normal mode */ - outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_BROAD, SEEQ_CFG1); - } -#endif -} - -void seeq8005_init(struct net_device *dev, int startp) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int i; - - outw(SEEQCFG2_RESET, SEEQ_CFG2); /* reset device */ - udelay(5); - - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0, SEEQ_DMAAR); /* load start address into both low and high byte */ -/* wait_for_buffer(dev); */ /* I think that you only need a wait for memory buffer */ - outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); - - for(i=0;i<6;i++) { /* set Station address */ - outb(dev->dev_addr[i], SEEQ_BUFFER); - udelay(2); - } - - outw( SEEQCFG1_BUFFER_TEA, SEEQ_CFG1); /* set xmit end area pointer to 16K */ - outb( DEFAULT_TEA, SEEQ_BUFFER); /* this gives us 16K of send buffer and 48K of recv buffer */ - - lp->receive_ptr = (DEFAULT_TEA+1)<<8; /* so we can find our packet_header */ - outw( lp->receive_ptr, SEEQ_RPR); /* Receive Pointer Register is set to recv buffer memory */ - - outw( 0x00ff, SEEQ_REA); /* Receive Area End */ - - if (net_debug>4) { - printk("%s: SA0 = ",dev->name); - - outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0, SEEQ_DMAAR); - outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); - - for(i=0;i<6;i++) { - printk("%02x ",inb(SEEQ_BUFFER)); - } - printk("\n"); - } - - outw( SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD | SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); - outw( SEEQCFG2_AUTO_REA | SEEQCFG2_CTRLO, SEEQ_CFG2); - outw( SEEQCMD_SET_RX_ON | SEEQCMD_TX_INT_EN | SEEQCMD_RX_INT_EN, SEEQ_CMD); - - if (net_debug>4) { - int old_cfg1; - old_cfg1 = inw(SEEQ_CFG1); - printk("%s: stat = 0x%04x\n",dev->name,inw(SEEQ_STATUS)); - printk("%s: cfg1 = 0x%04x\n",dev->name,old_cfg1); - printk("%s: cfg2 = 0x%04x\n",dev->name,inw(SEEQ_CFG2)); - printk("%s: raer = 0x%04x\n",dev->name,inw(SEEQ_REA)); - printk("%s: dmaar= 0x%04x\n",dev->name,inw(SEEQ_DMAAR)); - - } -} - - -static void hardware_send_packet(struct net_device * dev, char *buf, int length) -{ - int ioaddr = dev->base_addr; - int status = inw(SEEQ_STATUS); - int transmit_ptr = 0; - unsigned long tmp; - - if (net_debug>4) { - printk("%s: send 0x%04x\n",dev->name,length); - } - - /* Set FIFO to writemode and set packet-buffer address */ - outw( SEEQCMD_FIFO_WRITE | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - outw( transmit_ptr, SEEQ_DMAAR); - - /* output SEEQ Packet header barfage */ - outw( htons(length + 4), SEEQ_BUFFER); - outw( SEEQPKTH_XMIT | SEEQPKTH_DATA_FOLLOWS | SEEQPKTH_XMIT_INT_EN, SEEQ_BUFFER ); - - /* blat the buffer */ - outsw( SEEQ_BUFFER, buf, (length +1) >> 1); - /* paranoia !! */ - outw( 0, SEEQ_BUFFER); - outw( 0, SEEQ_BUFFER); - - /* set address of start of transmit chain */ - outw( transmit_ptr, SEEQ_TPR); - - /* drain FIFO */ - tmp = jiffies; - while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && time_before(jiffies, tmp + HZ)) - mb(); - - /* doit ! */ - outw( SEEQCMD_WINDOW_INT_ACK | SEEQCMD_SET_TX_ON | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - -} - - -#ifdef MODULE - -static struct net_device *dev_seeq; -MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address"); -MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number"); - -int __init init_module(void) -{ - dev_seeq = seeq8005_probe(-1); - return PTR_RET(dev_seeq); -} - -void __exit cleanup_module(void) -{ - unregister_netdev(dev_seeq); - release_region(dev_seeq->base_addr, SEEQ8005_IO_EXTENT); - free_netdev(dev_seeq); -} - -#endif /* MODULE */ diff --git a/drivers/net/ethernet/seeq/seeq8005.h b/drivers/net/ethernet/seeq/seeq8005.h deleted file mode 100644 index 5dfb009..0000000 --- a/drivers/net/ethernet/seeq/seeq8005.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * defines, etc for the seeq8005 - */ - -/* - * This file is distributed under GPL. - * - * This style and layout of this file is also copied - * from many of the other linux network device drivers. - */ - -/* The number of low I/O ports used by the ethercard. */ -#define SEEQ8005_IO_EXTENT 16 - -#define SEEQ_B (ioaddr) - -#define SEEQ_CMD (SEEQ_B) /* Write only */ -#define SEEQ_STATUS (SEEQ_B) /* Read only */ -#define SEEQ_CFG1 (SEEQ_B + 2) -#define SEEQ_CFG2 (SEEQ_B + 4) -#define SEEQ_REA (SEEQ_B + 6) /* Receive End Area Register */ -#define SEEQ_RPR (SEEQ_B + 10) /* Receive Pointer Register */ -#define SEEQ_TPR (SEEQ_B + 12) /* Transmit Pointer Register */ -#define SEEQ_DMAAR (SEEQ_B + 14) /* DMA Address Register */ -#define SEEQ_BUFFER (SEEQ_B + 8) /* Buffer Window Register */ - -#define DEFAULT_TEA (0x3f) - -#define SEEQCMD_DMA_INT_EN (0x0001) /* DMA Interrupt Enable */ -#define SEEQCMD_RX_INT_EN (0x0002) /* Receive Interrupt Enable */ -#define SEEQCMD_TX_INT_EN (0x0004) /* Transmit Interrupt Enable */ -#define SEEQCMD_WINDOW_INT_EN (0x0008) /* What the hell is this for?? */ -#define SEEQCMD_INT_MASK (0x000f) - -#define SEEQCMD_DMA_INT_ACK (0x0010) /* DMA ack */ -#define SEEQCMD_RX_INT_ACK (0x0020) -#define SEEQCMD_TX_INT_ACK (0x0040) -#define SEEQCMD_WINDOW_INT_ACK (0x0080) -#define SEEQCMD_ACK_ALL (0x00f0) - -#define SEEQCMD_SET_DMA_ON (0x0100) /* Enables DMA Request logic */ -#define SEEQCMD_SET_RX_ON (0x0200) /* Enables Packet RX */ -#define SEEQCMD_SET_TX_ON (0x0400) /* Starts TX run */ -#define SEEQCMD_SET_DMA_OFF (0x0800) -#define SEEQCMD_SET_RX_OFF (0x1000) -#define SEEQCMD_SET_TX_OFF (0x2000) -#define SEEQCMD_SET_ALL_OFF (0x3800) /* set all logic off */ - -#define SEEQCMD_FIFO_READ (0x4000) /* Set FIFO to read mode (read from Buffer) */ -#define SEEQCMD_FIFO_WRITE (0x8000) /* Set FIFO to write mode */ - -#define SEEQSTAT_DMA_INT_EN (0x0001) /* Status of interrupt enable */ -#define SEEQSTAT_RX_INT_EN (0x0002) -#define SEEQSTAT_TX_INT_EN (0x0004) -#define SEEQSTAT_WINDOW_INT_EN (0x0008) - -#define SEEQSTAT_DMA_INT (0x0010) /* Interrupt flagged */ -#define SEEQSTAT_RX_INT (0x0020) -#define SEEQSTAT_TX_INT (0x0040) -#define SEEQSTAT_WINDOW_INT (0x0080) -#define SEEQSTAT_ANY_INT (0x00f0) - -#define SEEQSTAT_DMA_ON (0x0100) /* DMA logic on */ -#define SEEQSTAT_RX_ON (0x0200) /* Packet RX on */ -#define SEEQSTAT_TX_ON (0x0400) /* TX running */ - -#define SEEQSTAT_FIFO_FULL (0x2000) -#define SEEQSTAT_FIFO_EMPTY (0x4000) -#define SEEQSTAT_FIFO_DIR (0x8000) /* 1=read, 0=write */ - -#define SEEQCFG1_BUFFER_MASK (0x000f) /* define what maps into the BUFFER register */ -#define SEEQCFG1_BUFFER_MAC0 (0x0000) /* MAC station addresses 0-5 */ -#define SEEQCFG1_BUFFER_MAC1 (0x0001) -#define SEEQCFG1_BUFFER_MAC2 (0x0002) -#define SEEQCFG1_BUFFER_MAC3 (0x0003) -#define SEEQCFG1_BUFFER_MAC4 (0x0004) -#define SEEQCFG1_BUFFER_MAC5 (0x0005) -#define SEEQCFG1_BUFFER_PROM (0x0006) /* The Address/CFG PROM */ -#define SEEQCFG1_BUFFER_TEA (0x0007) /* Transmit end area */ -#define SEEQCFG1_BUFFER_BUFFER (0x0008) /* Packet buffer memory */ -#define SEEQCFG1_BUFFER_INT_VEC (0x0009) /* Interrupt Vector */ - -#define SEEQCFG1_DMA_INTVL_MASK (0x0030) -#define SEEQCFG1_DMA_CONT (0x0000) -#define SEEQCFG1_DMA_800ns (0x0010) -#define SEEQCFG1_DMA_1600ns (0x0020) -#define SEEQCFG1_DMA_3200ns (0x0030) - -#define SEEQCFG1_DMA_LEN_MASK (0x00c0) -#define SEEQCFG1_DMA_LEN1 (0x0000) -#define SEEQCFG1_DMA_LEN2 (0x0040) -#define SEEQCFG1_DMA_LEN4 (0x0080) -#define SEEQCFG1_DMA_LEN8 (0x00c0) - -#define SEEQCFG1_MAC_MASK (0x3f00) /* Dis/enable bits for MAC addresses */ -#define SEEQCFG1_MAC0_EN (0x0100) -#define SEEQCFG1_MAC1_EN (0x0200) -#define SEEQCFG1_MAC2_EN (0x0400) -#define SEEQCFG1_MAC3_EN (0x0800) -#define SEEQCFG1_MAC4_EN (0x1000) -#define SEEQCFG1_MAC5_EN (0x2000) - -#define SEEQCFG1_MATCH_MASK (0xc000) /* Packet matching logic cfg bits */ -#define SEEQCFG1_MATCH_SPECIFIC (0x0000) /* only matching MAC addresses */ -#define SEEQCFG1_MATCH_BROAD (0x4000) /* matching and broadcast addresses */ -#define SEEQCFG1_MATCH_MULTI (0x8000) /* matching, broadcast and multicast */ -#define SEEQCFG1_MATCH_ALL (0xc000) /* Promiscuous mode */ - -#define SEEQCFG1_DEFAULT (SEEQCFG1_BUFFER_BUFFER | SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD) - -#define SEEQCFG2_BYTE_SWAP (0x0001) /* 0=Intel byte-order */ -#define SEEQCFG2_AUTO_REA (0x0002) /* if set, Receive End Area will be updated when reading from Buffer */ - -#define SEEQCFG2_CRC_ERR_EN (0x0008) /* enables receiving of packets with CRC errors */ -#define SEEQCFG2_DRIBBLE_EN (0x0010) /* enables receiving of non-aligned packets */ -#define SEEQCFG2_SHORT_EN (0x0020) /* enables receiving of short packets */ - -#define SEEQCFG2_SLOTSEL (0x0040) /* 0= standard IEEE802.3, 1= smaller,faster, non-standard */ -#define SEEQCFG2_NO_PREAM (0x0080) /* 1= user supplies Xmit preamble bytes */ -#define SEEQCFG2_ADDR_LEN (0x0100) /* 1= 2byte addresses */ -#define SEEQCFG2_REC_CRC (0x0200) /* 0= received packets will have CRC stripped from them */ -#define SEEQCFG2_XMIT_NO_CRC (0x0400) /* don't xmit CRC with each packet (user supplies it) */ -#define SEEQCFG2_LOOPBACK (0x0800) -#define SEEQCFG2_CTRLO (0x1000) -#define SEEQCFG2_RESET (0x8000) /* software Hard-reset bit */ - -struct seeq_pkt_hdr { - unsigned short next; /* address of next packet header */ - unsigned char babble_int:1, /* enable int on >1514 byte packet */ - coll_int:1, /* enable int on collision */ - coll_16_int:1, /* enable int on >15 collision */ - xmit_int:1, /* enable int on success (or xmit with <15 collision) */ - unused:1, - data_follows:1, /* if not set, process this as a header and pointer only */ - chain_cont:1, /* if set, more headers in chain only cmd bit valid in recv header */ - xmit_recv:1; /* if set, a xmit packet, else a receive packet.*/ - unsigned char status; -}; - -#define SEEQPKTH_BAB_INT_EN (0x01) /* xmit only */ -#define SEEQPKTH_COL_INT_EN (0x02) /* xmit only */ -#define SEEQPKTH_COL16_INT_EN (0x04) /* xmit only */ -#define SEEQPKTH_XMIT_INT_EN (0x08) /* xmit only */ -#define SEEQPKTH_DATA_FOLLOWS (0x20) /* supposedly in xmit only */ -#define SEEQPKTH_CHAIN (0x40) /* more headers follow */ -#define SEEQPKTH_XMIT (0x80) - -#define SEEQPKTS_BABBLE (0x0100) /* xmit only */ -#define SEEQPKTS_OVERSIZE (0x0100) /* recv only */ -#define SEEQPKTS_COLLISION (0x0200) /* xmit only */ -#define SEEQPKTS_CRC_ERR (0x0200) /* recv only */ -#define SEEQPKTS_COLL16 (0x0400) /* xmit only */ -#define SEEQPKTS_DRIB (0x0400) /* recv only */ -#define SEEQPKTS_SHORT (0x0800) /* recv only */ -#define SEEQPKTS_DONE (0x8000) -#define SEEQPKTS_ANY_ERROR (0x0f00) -- cgit v0.10.2 From 360eb5da665566a110993c58ed2a63e98f6720bf Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 22 Jan 2013 11:18:03 +0100 Subject: ipmr: fix sparse warning when testing origin or group mfc_mcastgrp and mfc_origin are __be32, thus we need to convert INADDR_ANY. Because INADDR_ANY is 0, this patch just fix sparse warnings. Reported-by: Fengguang Wu Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 4b5e226..7085b9b 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -832,12 +832,12 @@ static struct mfc_cache *ipmr_cache_find(struct mr_table *mrt, static struct mfc_cache *ipmr_cache_find_any_parent(struct mr_table *mrt, int vifi) { - int line = MFC_HASH(INADDR_ANY, INADDR_ANY); + int line = MFC_HASH(htonl(INADDR_ANY), htonl(INADDR_ANY)); struct mfc_cache *c; list_for_each_entry_rcu(c, &mrt->mfc_cache_array[line], list) - if (c->mfc_origin == INADDR_ANY && - c->mfc_mcastgrp == INADDR_ANY && + if (c->mfc_origin == htonl(INADDR_ANY) && + c->mfc_mcastgrp == htonl(INADDR_ANY) && c->mfc_un.res.ttls[vifi] < 255) return c; @@ -848,14 +848,14 @@ static struct mfc_cache *ipmr_cache_find_any_parent(struct mr_table *mrt, static struct mfc_cache *ipmr_cache_find_any(struct mr_table *mrt, __be32 mcastgrp, int vifi) { - int line = MFC_HASH(mcastgrp, INADDR_ANY); + int line = MFC_HASH(mcastgrp, htonl(INADDR_ANY)); struct mfc_cache *c, *proxy; - if (mcastgrp == INADDR_ANY) + if (mcastgrp == htonl(INADDR_ANY)) goto skip; list_for_each_entry_rcu(c, &mrt->mfc_cache_array[line], list) - if (c->mfc_origin == INADDR_ANY && + if (c->mfc_origin == htonl(INADDR_ANY) && c->mfc_mcastgrp == mcastgrp) { if (c->mfc_un.res.ttls[vifi] < 255) return c; @@ -1148,7 +1148,7 @@ static int ipmr_mfc_add(struct net *net, struct mr_table *mrt, return 0; } - if (mfc->mfcc_mcastgrp.s_addr != INADDR_ANY && + if (mfc->mfcc_mcastgrp.s_addr != htonl(INADDR_ANY) && !ipv4_is_multicast(mfc->mfcc_mcastgrp.s_addr)) return -EINVAL; @@ -1807,7 +1807,7 @@ static int ip_mr_forward(struct net *net, struct mr_table *mrt, cache->mfc_un.res.pkt++; cache->mfc_un.res.bytes += skb->len; - if (cache->mfc_origin == INADDR_ANY && true_vifi >= 0) { + if (cache->mfc_origin == htonl(INADDR_ANY) && true_vifi >= 0) { struct mfc_cache *cache_proxy; /* For an (*,G) entry, we only check that the incomming @@ -1863,8 +1863,8 @@ forward: /* * Forward the frame */ - if (cache->mfc_origin == INADDR_ANY && - cache->mfc_mcastgrp == INADDR_ANY) { + if (cache->mfc_origin == htonl(INADDR_ANY) && + cache->mfc_mcastgrp == htonl(INADDR_ANY)) { if (true_vifi >= 0 && true_vifi != cache->mfc_parent && ip_hdr(skb)->ttl > @@ -1881,7 +1881,8 @@ forward: for (ct = cache->mfc_un.res.maxvif - 1; ct >= cache->mfc_un.res.minvif; ct--) { /* For (*,G) entry, don't forward to the incoming interface */ - if ((cache->mfc_origin != INADDR_ANY || ct != true_vifi) && + if ((cache->mfc_origin != htonl(INADDR_ANY) || + ct != true_vifi) && ip_hdr(skb)->ttl > cache->mfc_un.res.ttls[ct]) { if (psend != -1) { struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); -- cgit v0.10.2 From 2724680bceee94eac391552863771af105a7355c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 22 Jan 2013 05:20:05 +0000 Subject: neigh: Keep neighbour cache entries if number of them is small enough. Since we have removed NCE (Neighbour Cache Entry) reference from routing entries, the only refcnt holders of an NCE are its timer (if running) and its owner table, in usual cases. As a result, neigh_periodic_work() purges NCEs over and over again even for gateways. It does not make sense to purge entries, if number of them is very small, so keep them. The minimum number of entries to keep is specified by gc_thresh1. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 4976564..19ac180 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -26,6 +26,11 @@ route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase this when using large numbers of interfaces and/or routes. +neigh/default/gc_thresh1 - INTEGER + Minimum number of entries to keep. Garbage collector will not + purge entries if there are fewer than this number. + Default: 256 + neigh/default/gc_thresh3 - INTEGER Maximum number of neighbor entries allowed. Increase this when using large numbers of interfaces and when communicating diff --git a/net/core/neighbour.c b/net/core/neighbour.c index c815f28..7bd0eed 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -778,6 +778,9 @@ static void neigh_periodic_work(struct work_struct *work) nht = rcu_dereference_protected(tbl->nht, lockdep_is_held(&tbl->lock)); + if (atomic_read(&tbl->entries) < tbl->gc_thresh1) + goto out; + /* * periodically recompute ReachableTime from random function */ @@ -832,6 +835,7 @@ next_elt: nht = rcu_dereference_protected(tbl->nht, lockdep_is_held(&tbl->lock)); } +out: /* Cycle through all hash buckets every base_reachable_time/2 ticks. * ARP entry timeouts range from 1/2 base_reachable_time to 3/2 * base_reachable_time. -- cgit v0.10.2 From 8fbcec241df21d1ba2aba09974ea9017832b69b0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 22 Jan 2013 06:32:44 +0000 Subject: net: Use IS_ERR_OR_NULL(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/core/flow.c b/net/core/flow.c index b0901ee..43f7495 100644 --- a/net/core/flow.c +++ b/net/core/flow.c @@ -286,7 +286,7 @@ nocache: else fle->genid--; } else { - if (flo && !IS_ERR(flo)) + if (!IS_ERR_OR_NULL(flo)) flo->ops->delete(flo); } ret_object: -- cgit v0.10.2 From 50c3a487d507568359ccbce1b15bcdfc01edf7ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 22 Jan 2013 06:32:49 +0000 Subject: ipv4: Use IS_ERR_OR_NULL(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 4fdf9671..4b70539 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1333,7 +1333,7 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, segs = ops->callbacks.gso_segment(skb, features); rcu_read_unlock(); - if (!segs || IS_ERR(segs)) + if (IS_ERR_OR_NULL(segs)) goto out; skb = segs; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 2aa69c8..5227194 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3243,7 +3243,7 @@ __tcp_alloc_md5sig_pool(struct sock *sk) struct crypto_hash *hash; hash = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC); - if (!hash || IS_ERR(hash)) + if (IS_ERR_OR_NULL(hash)) goto out_free; per_cpu_ptr(pool, cpu)->md5_desc.tfm = hash; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 79c8dbe..cf6158f 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -971,7 +971,7 @@ back_from_confirm: sizeof(struct udphdr), &ipc, &rt, msg->msg_flags); err = PTR_ERR(skb); - if (skb && !IS_ERR(skb)) + if (!IS_ERR_OR_NULL(skb)) err = udp_send_skb(skb, fl4); goto out; } -- cgit v0.10.2 From 3f0d2ba0bd7d7dc7b461bc7d2cd3c297b843a3a8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 22 Jan 2013 06:32:54 +0000 Subject: ipv6: Use IS_ERR_OR_NULL(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 420e563..80d5980 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1051,7 +1051,7 @@ retry: ipv6_add_addr(idev, &addr, tmp_plen, ipv6_addr_type(&addr)&IPV6_ADDR_SCOPE_MASK, addr_flags) : NULL; - if (!ift || IS_ERR(ift)) { + if (IS_ERR_OR_NULL(ift)) { in6_ifa_put(ifp); in6_dev_put(idev); pr_info("%s: retry temporary address regeneration\n", __func__); @@ -2079,7 +2079,7 @@ ok: addr_type&IPV6_ADDR_SCOPE_MASK, addr_flags); - if (!ifp || IS_ERR(ifp)) { + if (IS_ERR_OR_NULL(ifp)) { in6_dev_put(in6_dev); return; } -- cgit v0.10.2 From 0cc8d8df9bb931f1d4ab376f59d8ab8a49f9d4d4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 22 Jan 2013 06:33:09 +0000 Subject: netfilter: Use IS_ERR_OR_NULL(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index 3ea4127..7dc6a97 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -901,7 +901,7 @@ static int get_info(struct net *net, void __user *user, #endif t = try_then_request_module(xt_find_table_lock(net, NFPROTO_ARP, name), "arptable_%s", name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { struct arpt_getinfo info; const struct xt_table_info *private = t->private; #ifdef CONFIG_COMPAT @@ -958,7 +958,7 @@ static int get_entries(struct net *net, struct arpt_get_entries __user *uptr, } t = xt_find_table_lock(net, NFPROTO_ARP, get.name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { const struct xt_table_info *private = t->private; duprintf("t->private->number = %u\n", @@ -1001,7 +1001,7 @@ static int __do_replace(struct net *net, const char *name, t = try_then_request_module(xt_find_table_lock(net, NFPROTO_ARP, name), "arptable_%s", name); - if (!t || IS_ERR(t)) { + if (IS_ERR_OR_NULL(t)) { ret = t ? PTR_ERR(t) : -ENOENT; goto free_newinfo_counters_untrans; } @@ -1158,7 +1158,7 @@ static int do_add_counters(struct net *net, const void __user *user, } t = xt_find_table_lock(net, NFPROTO_ARP, name); - if (!t || IS_ERR(t)) { + if (IS_ERR_OR_NULL(t)) { ret = t ? PTR_ERR(t) : -ENOENT; goto free; } @@ -1646,7 +1646,7 @@ static int compat_get_entries(struct net *net, xt_compat_lock(NFPROTO_ARP); t = xt_find_table_lock(net, NFPROTO_ARP, get.name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { const struct xt_table_info *private = t->private; struct xt_table_info info; diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index 17c5e06..3efcf87 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1090,7 +1090,7 @@ static int get_info(struct net *net, void __user *user, #endif t = try_then_request_module(xt_find_table_lock(net, AF_INET, name), "iptable_%s", name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { struct ipt_getinfo info; const struct xt_table_info *private = t->private; #ifdef CONFIG_COMPAT @@ -1149,7 +1149,7 @@ get_entries(struct net *net, struct ipt_get_entries __user *uptr, } t = xt_find_table_lock(net, AF_INET, get.name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { const struct xt_table_info *private = t->private; duprintf("t->private->number = %u\n", private->number); if (get.size == private->size) @@ -1189,7 +1189,7 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks, t = try_then_request_module(xt_find_table_lock(net, AF_INET, name), "iptable_%s", name); - if (!t || IS_ERR(t)) { + if (IS_ERR_OR_NULL(t)) { ret = t ? PTR_ERR(t) : -ENOENT; goto free_newinfo_counters_untrans; } @@ -1347,7 +1347,7 @@ do_add_counters(struct net *net, const void __user *user, } t = xt_find_table_lock(net, AF_INET, name); - if (!t || IS_ERR(t)) { + if (IS_ERR_OR_NULL(t)) { ret = t ? PTR_ERR(t) : -ENOENT; goto free; } @@ -1931,7 +1931,7 @@ compat_get_entries(struct net *net, struct compat_ipt_get_entries __user *uptr, xt_compat_lock(AF_INET); t = xt_find_table_lock(net, AF_INET, get.name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { const struct xt_table_info *private = t->private; struct xt_table_info info; duprintf("t->private->number = %u\n", private->number); diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 125a90d..341b54a 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1098,7 +1098,7 @@ static int get_info(struct net *net, void __user *user, #endif t = try_then_request_module(xt_find_table_lock(net, AF_INET6, name), "ip6table_%s", name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { struct ip6t_getinfo info; const struct xt_table_info *private = t->private; #ifdef CONFIG_COMPAT @@ -1157,7 +1157,7 @@ get_entries(struct net *net, struct ip6t_get_entries __user *uptr, } t = xt_find_table_lock(net, AF_INET6, get.name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { struct xt_table_info *private = t->private; duprintf("t->private->number = %u\n", private->number); if (get.size == private->size) @@ -1197,7 +1197,7 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks, t = try_then_request_module(xt_find_table_lock(net, AF_INET6, name), "ip6table_%s", name); - if (!t || IS_ERR(t)) { + if (IS_ERR_OR_NULL(t)) { ret = t ? PTR_ERR(t) : -ENOENT; goto free_newinfo_counters_untrans; } @@ -1355,7 +1355,7 @@ do_add_counters(struct net *net, const void __user *user, unsigned int len, } t = xt_find_table_lock(net, AF_INET6, name); - if (!t || IS_ERR(t)) { + if (IS_ERR_OR_NULL(t)) { ret = t ? PTR_ERR(t) : -ENOENT; goto free; } @@ -1939,7 +1939,7 @@ compat_get_entries(struct net *net, struct compat_ip6t_get_entries __user *uptr, xt_compat_lock(AF_INET6); t = xt_find_table_lock(net, AF_INET6, get.name); - if (t && !IS_ERR(t)) { + if (!IS_ERR_OR_NULL(t)) { const struct xt_table_info *private = t->private; struct xt_table_info info; duprintf("t->private->number = %u\n", private->number); -- cgit v0.10.2 From 6aaacd861517f89797f2f4a54624a599847262f3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 13 Jan 2013 19:54:58 +0100 Subject: ath9k_hw: fix RF bank initialization ar900*_init_mode_regs needs to be called before RF banks are allocated, otherwise the storage size of RF banks isn't known. This patch fixes a memory overrun that can show up as a crash on unloading the module. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 54da026..f053d97 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -23,13 +23,13 @@ /* General hardware code for the A5008/AR9001/AR9002 hadware families */ -static void ar9002_hw_init_mode_regs(struct ath_hw *ah) +static int ar9002_hw_init_mode_regs(struct ath_hw *ah) { if (AR_SREV_9271(ah)) { INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271); INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271); INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg); - return; + return 0; } if (ah->config.pcie_clock_req) @@ -104,7 +104,7 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) data = devm_kzalloc(ah->dev, size, GFP_KERNEL); if (!data) - return; + return -ENOMEM; memcpy(data, addac->ia_array, size); addac->ia_array = data; @@ -120,6 +120,7 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniCckfirJapan2484, ar9287Common_japan_2484_cck_fir_coeff_9287_1_1); } + return 0; } static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah) @@ -415,7 +416,10 @@ int ar9002_hw_attach_ops(struct ath_hw *ah) struct ath_hw_ops *ops = ath9k_hw_ops(ah); int ret; - priv_ops->init_mode_regs = ar9002_hw_init_mode_regs; + ret = ar9002_hw_init_mode_regs(ah); + if (ret) + return ret; + priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs; ops->config_pci_powersave = ar9002_hw_configpcipowersave; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index de8a56c..6fcd6e9 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -704,7 +704,7 @@ void ar9003_hw_attach_ops(struct ath_hw *ah) struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); struct ath_hw_ops *ops = ath9k_hw_ops(ah); - priv_ops->init_mode_regs = ar9003_hw_init_mode_regs; + ar9003_hw_init_mode_regs(ah); priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs; ops->config_pci_powersave = ar9003_hw_configpcipowersave; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index caf0626..a7448d1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -54,11 +54,6 @@ static void ath9k_hw_init_cal_settings(struct ath_hw *ah) ath9k_hw_private_ops(ah)->init_cal_settings(ah); } -static void ath9k_hw_init_mode_regs(struct ath_hw *ah) -{ - ath9k_hw_private_ops(ah)->init_mode_regs(ah); -} - static u32 ath9k_hw_compute_pll_control(struct ath_hw *ah, struct ath9k_channel *chan) { @@ -670,8 +665,6 @@ static int __ath9k_hw_init(struct ath_hw *ah) if (!AR_SREV_9300_20_OR_LATER(ah)) ah->ani_function &= ~ATH9K_ANI_MRC_CCK; - ath9k_hw_init_mode_regs(ah); - if (!ah->is_pciexpress) ath9k_hw_disablepcie(ah); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index d32ebf7..195613f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -600,7 +600,6 @@ struct ath_hw_radar_conf { * @init_cal_settings: setup types of calibrations supported * @init_cal: starts actual calibration * - * @init_mode_regs: Initializes mode registers * @init_mode_gain_regs: Initialize TX/RX gain registers * * @rf_set_freq: change frequency @@ -619,7 +618,6 @@ struct ath_hw_private_ops { void (*init_cal_settings)(struct ath_hw *ah); bool (*init_cal)(struct ath_hw *ah, struct ath9k_channel *chan); - void (*init_mode_regs)(struct ath_hw *ah); void (*init_mode_gain_regs)(struct ath_hw *ah); void (*setup_calibration)(struct ath_hw *ah, struct ath9k_cal_list *currCal); -- cgit v0.10.2 From 708d019fd1d2d1bf184e797ebe934c90a6527d50 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 8 Jan 2013 13:33:03 +0800 Subject: drivers/net/wireless: need consider the not '\0' terminated string. in ray_cs.c: the a_current_ess_id is "Null terminated unless ESSID_SIZE long" so we need buffer it with '\0' firstly, before using strlen or %s. additional information: in drivers/net/wireless/rayctl.h: "NULL terminated unless 32 long" is a comment at line 616, 664 ESSID_SIZE is 32, at line 190 in include/uapi/linux/wireless.h: IW_ESSID_MAX_SIZE is also 32 in drivers/net/wireless/ray_cs.c: use strncpy for it, without '\0' terminated, at line 639 use memcpy for it, assume not '\0' terminated in line 1092..1097 buffer it with '\0' firstly, before using %s, in line 2576, 2598..2600 Signed-off-by: Chen Gang Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 598ca1c..e7cf37f 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -1107,12 +1107,15 @@ static int ray_get_essid(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { ray_dev_t *local = netdev_priv(dev); + UCHAR tmp[IW_ESSID_MAX_SIZE + 1]; /* Get the essid that was set */ memcpy(extra, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE); + memcpy(tmp, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE); + tmp[IW_ESSID_MAX_SIZE] = '\0'; /* Push it out ! */ - wrqu->essid.length = strlen(extra); + wrqu->essid.length = strlen(tmp); wrqu->essid.flags = 1; /* active */ return 0; @@ -1842,6 +1845,8 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) UCHAR tmp; UCHAR cmd; UCHAR status; + UCHAR memtmp[ESSID_SIZE + 1]; + if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */ return IRQ_NONE; @@ -1901,17 +1906,21 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) break; case CCS_START_NETWORK: case CCS_JOIN_NETWORK: + memcpy(memtmp, local->sparm.b4.a_current_ess_id, + ESSID_SIZE); + memtmp[ESSID_SIZE] = '\0'; + if (status == CCS_COMMAND_COMPLETE) { if (readb (&pccs->var.start_network.net_initiated) == 1) { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" started\n", - local->sparm.b4.a_current_ess_id); + memtmp); } else { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" joined\n", - local->sparm.b4.a_current_ess_id); + memtmp); } memcpy_fromio(&local->bss_id, pccs->var.start_network.bssid, @@ -1939,12 +1948,12 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) if (status == CCS_START_NETWORK) { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" start failed\n", - local->sparm.b4.a_current_ess_id); + memtmp); local->timer.function = start_net; } else { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" join failed\n", - local->sparm.b4.a_current_ess_id); + memtmp); local->timer.function = join_net; } add_timer(&local->timer); -- cgit v0.10.2 From e03e8ddbfd1f04fc1437e5e3e7a8ec05a1355c5f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Jan 2013 19:31:30 +0300 Subject: b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent() There were no break statements in this switch statement so everything used the default settings. Per Walter Harms's suggestion, I've replaced the switch statement and done a little cleanup. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c index 97d4e27..aaca60c 100644 --- a/drivers/net/wireless/b43/tables_nphy.c +++ b/drivers/net/wireless/b43/tables_nphy.c @@ -3226,8 +3226,6 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent( { struct nphy_gain_ctl_workaround_entry *e; u8 phy_idx; - u8 tr_iso = ghz5 ? dev->dev->bus_sprom->fem.ghz5.tr_iso : - dev->dev->bus_sprom->fem.ghz2.tr_iso; if (!ghz5 && dev->phy.rev >= 6 && dev->phy.radio_rev == 11) return &nphy_gain_ctl_wa_phy6_radio11_ghz2; @@ -3249,6 +3247,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent( !b43_channel_type_is_40mhz(dev->phy.channel_type)) e->cliplo_gain = 0x2d; } else if (!ghz5 && dev->phy.rev >= 5) { + static const int gain_data[] = {0x0062, 0x0064, 0x006a, 0x106a, + 0x106c, 0x1074, 0x107c, 0x207c}; + u8 tr_iso = dev->dev->bus_sprom->fem.ghz2.tr_iso; + if (ext_lna) { e->rfseq_init[0] &= ~0x4000; e->rfseq_init[1] &= ~0x4000; @@ -3256,26 +3258,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent( e->rfseq_init[3] &= ~0x4000; e->init_gain &= ~0x4000; } - switch (tr_iso) { - case 0: - e->cliplo_gain = 0x0062; - case 1: - e->cliplo_gain = 0x0064; - case 2: - e->cliplo_gain = 0x006a; - case 3: - e->cliplo_gain = 0x106a; - case 4: - e->cliplo_gain = 0x106c; - case 5: - e->cliplo_gain = 0x1074; - case 6: - e->cliplo_gain = 0x107c; - case 7: - e->cliplo_gain = 0x207c; - default: - e->cliplo_gain = 0x106a; - } + if (tr_iso > 7) + tr_iso = 3; + e->cliplo_gain = gain_data[tr_iso]; + } else if (ghz5 && dev->phy.rev == 4 && ext_lna) { e->rfseq_init[0] &= ~0x4000; e->rfseq_init[1] &= ~0x4000; -- cgit v0.10.2 From f49aabf816afa5913e5001bd1db1c3efb4c6e19e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 13 Jan 2013 23:03:42 +0300 Subject: prism54: bug in getting auth type There is a missing break statement so SHARED_KEY authentication doesn't work. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 4e44b1a..1c22b81 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1503,6 +1503,7 @@ static int prism54_get_auth(struct net_device *ndev, case DOT11_AUTH_BOTH: case DOT11_AUTH_SK: param->value = IW_AUTH_ALG_SHARED_KEY; + break; case DOT11_AUTH_NONE: default: param->value = 0; -- cgit v0.10.2 From 84e9e8ebd369679a958200a8baca96aafb2393bb Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 17 Jan 2013 17:34:32 +0100 Subject: rt2x00: Improve TX status handling for BlockAckReq frames Since rt2800 hardware isn't capable of reporting the TX status of BlockAckReq frames implement the TX status handling of BARs in rt2x00lib. We keep track of all BARs that are send out and try to match incoming BAs to the appropriate BARs. This allows us to report a more or less accurate TX status for BAR frames which in turn improves BA session stability. This is loosley based on Christian Lamparter's patch for carl9170 "carl9170: fix HT peer BA session corruption". We have to walk the list of pending BARs for every rx'red BA even though most BAs don't belong to any of these BARs as they are just acknowledging an AMPDU. To keep that overhead low use RCU which allows us to walk the list of pending BARs without the need to acquire a lock. This however requires us to _copy_ relevant information from the BAR (RA, TA, control field, start sequence number) into our BAR list entry. Signed-off-by: Helmut Schaa Tested-by: Andreas Hartmann Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index f139a91..a5c694f 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1296,8 +1296,7 @@ void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, - !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 0); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, @@ -5146,8 +5145,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL; + IEEE80211_HW_REPORTS_TX_ACK_STATUS; /* * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 0751b35..b52512b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1016,6 +1016,26 @@ struct rt2x00_dev { * Protect the interrupt mask register. */ spinlock_t irqmask_lock; + + /* + * List of BlockAckReq TX entries that need driver BlockAck processing. + */ + struct list_head bar_list; + spinlock_t bar_list_lock; +}; + +struct rt2x00_bar_list_entry { + struct list_head list; + struct rcu_head head; + + struct queue_entry *entry; + int block_acked; + + /* Relevant parts of the IEEE80211 BAR header */ + __u8 ra[6]; + __u8 ta[6]; + __le16 control; + __le16 start_seq_num; }; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 44f8b3f..b40a538 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -271,6 +271,50 @@ void rt2x00lib_dmadone(struct queue_entry *entry) } EXPORT_SYMBOL_GPL(rt2x00lib_dmadone); +static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_bar *bar = (void *) entry->skb->data; + struct rt2x00_bar_list_entry *bar_entry; + int ret; + + if (likely(!ieee80211_is_back_req(bar->frame_control))) + return 0; + + /* + * Unlike all other frames, the status report for BARs does + * not directly come from the hardware as it is incapable of + * matching a BA to a previously send BAR. The hardware will + * report all BARs as if they weren't acked at all. + * + * Instead the RX-path will scan for incoming BAs and set the + * block_acked flag if it sees one that was likely caused by + * a BAR from us. + * + * Remove remaining BARs here and return their status for + * TX done processing. + */ + ret = 0; + rcu_read_lock(); + list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) { + if (bar_entry->entry != entry) + continue; + + spin_lock_bh(&rt2x00dev->bar_list_lock); + /* Return whether this BAR was blockacked or not */ + ret = bar_entry->block_acked; + /* Remove the BAR from our checklist */ + list_del_rcu(&bar_entry->list); + spin_unlock_bh(&rt2x00dev->bar_list_lock); + kfree_rcu(bar_entry, head); + + break; + } + rcu_read_unlock(); + + return ret; +} + void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc) { @@ -324,9 +368,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb); /* - * Determine if the frame has been successfully transmitted. + * Determine if the frame has been successfully transmitted and + * remove BARs from our check list while checking for their + * TX status. */ success = + rt2x00lib_txdone_bar_status(entry) || test_bit(TXDONE_SUCCESS, &txdesc->flags) || test_bit(TXDONE_UNKNOWN, &txdesc->flags); @@ -491,6 +538,50 @@ static void rt2x00lib_sleep(struct work_struct *work) IEEE80211_CONF_CHANGE_PS); } +static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_bar_list_entry *entry; + struct ieee80211_bar *ba = (void *)skb->data; + + if (likely(!ieee80211_is_back(ba->frame_control))) + return; + + if (rxdesc->size < sizeof(*ba) + FCS_LEN) + return; + + rcu_read_lock(); + list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) { + + if (ba->start_seq_num != entry->start_seq_num) + continue; + +#define TID_CHECK(a, b) ( \ + ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) == \ + ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK))) \ + + if (!TID_CHECK(ba->control, entry->control)) + continue; + +#undef TID_CHECK + + if (compare_ether_addr(ba->ra, entry->ta)) + continue; + + if (compare_ether_addr(ba->ta, entry->ra)) + continue; + + /* Mark BAR since we received the according BA */ + spin_lock_bh(&rt2x00dev->bar_list_lock); + entry->block_acked = 1; + spin_unlock_bh(&rt2x00dev->bar_list_lock); + break; + } + rcu_read_unlock(); + +} + static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, struct rxdone_entry_desc *rxdesc) @@ -674,6 +765,12 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp) rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc); /* + * Check for incoming BlockAcks to match to the BlockAckReqs + * we've send out. + */ + rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc); + + /* * Update extra components */ rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc); @@ -1183,6 +1280,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) spin_lock_init(&rt2x00dev->irqmask_lock); mutex_init(&rt2x00dev->csr_mutex); + INIT_LIST_HEAD(&rt2x00dev->bar_list); + spin_lock_init(&rt2x00dev->bar_list_lock); set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index e488b94..f35d85a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -582,6 +582,48 @@ static void rt2x00queue_kick_tx_queue(struct data_queue *queue, queue->rt2x00dev->ops->lib->kick_queue(queue); } +static void rt2x00queue_bar_check(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_bar *bar = (void *) (entry->skb->data + + rt2x00dev->ops->extra_tx_headroom); + struct rt2x00_bar_list_entry *bar_entry; + + if (likely(!ieee80211_is_back_req(bar->frame_control))) + return; + + bar_entry = kmalloc(sizeof(*bar_entry), GFP_ATOMIC); + + /* + * If the alloc fails we still send the BAR out but just don't track + * it in our bar list. And as a result we will report it to mac80211 + * back as failed. + */ + if (!bar_entry) + return; + + bar_entry->entry = entry; + bar_entry->block_acked = 0; + + /* + * Copy the relevant parts of the 802.11 BAR into out check list + * such that we can use RCU for less-overhead in the RX path since + * sending BARs and processing the according BlockAck should be + * the exception. + */ + memcpy(bar_entry->ra, bar->ra, sizeof(bar->ra)); + memcpy(bar_entry->ta, bar->ta, sizeof(bar->ta)); + bar_entry->control = bar->control; + bar_entry->start_seq_num = bar->start_seq_num; + + /* + * Insert BAR into our BAR check list. + */ + spin_lock_bh(&rt2x00dev->bar_list_lock); + list_add_tail_rcu(&bar_entry->list, &rt2x00dev->bar_list); + spin_unlock_bh(&rt2x00dev->bar_list_lock); +} + int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, bool local) { @@ -680,6 +722,11 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, goto out; } + /* + * Put BlockAckReqs into our check list for driver BA processing. + */ + rt2x00queue_bar_check(entry); + set_bit(ENTRY_DATA_PENDING, &entry->flags); rt2x00queue_index_inc(entry, Q_INDEX); -- cgit v0.10.2 From 7532c7d0138a4984eb0c8b12b9c310cf8a6d6977 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Thu, 17 Jan 2013 17:41:57 -0800 Subject: mwifiex: correction in status codes used for association failure When AP responds with appropriate status code, we forward that code correctly to cfg80211. But sometimes when there is no response from AP, our firmware uses proprietary status codes. We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index 41c85dd..ebe2f6a 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -330,6 +330,9 @@ enum P2P_MODES { #define HOST_SLEEP_CFG_GPIO_DEF 0xff #define HOST_SLEEP_CFG_GAP_DEF 0 +#define MWIFIEX_TIMEOUT_FOR_AP_RESP 0xfffc +#define MWIFIEX_STATUS_CODE_AUTH_TIMEOUT 2 + #define CMD_F_HOSTCMD (1 << 0) #define CMD_F_CANCELED (1 << 1) diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 3c7cabe..893d809 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -615,23 +615,33 @@ int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, struct ieee_types_assoc_rsp *assoc_rsp; struct mwifiex_bssdescriptor *bss_desc; u8 enable_data = true; + u16 cap_info, status_code; assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params; + cap_info = le16_to_cpu(assoc_rsp->cap_info_bitmap); + status_code = le16_to_cpu(assoc_rsp->status_code); + priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN, sizeof(priv->assoc_rsp_buf)); memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size); - if (le16_to_cpu(assoc_rsp->status_code)) { + if (status_code) { priv->adapter->dbg.num_cmd_assoc_failure++; dev_err(priv->adapter->dev, "ASSOC_RESP: failed, status code=%d err=%#x a_id=%#x\n", - le16_to_cpu(assoc_rsp->status_code), - le16_to_cpu(assoc_rsp->cap_info_bitmap), - le16_to_cpu(assoc_rsp->a_id)); + status_code, cap_info, le16_to_cpu(assoc_rsp->a_id)); + + if (cap_info == MWIFIEX_TIMEOUT_FOR_AP_RESP) { + if (status_code == MWIFIEX_STATUS_CODE_AUTH_TIMEOUT) + ret = WLAN_STATUS_AUTH_TIMEOUT; + else + ret = WLAN_STATUS_UNSPECIFIED_FAILURE; + } else { + ret = status_code; + } - ret = le16_to_cpu(assoc_rsp->status_code); goto done; } -- cgit v0.10.2 From a2ca8ecb8ffc985e82c9570c3837408f7efe8c9d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 19 Jan 2013 01:24:01 +0400 Subject: mwl8k: don't return zero on failure paths in mwl8k_probe[_hw]() If pci_iomap() fails in mwl8k_probe(), it breaks off initialization, deallocates all resources, but returns zero. There is a similar issue when priv->rxd_ops is NULL in mwl8k_probe_hw(). The patch adds proper error code return values. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a9c0788..6835764 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5555,6 +5555,7 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw) if (priv->rxd_ops == NULL) { wiphy_err(hw->wiphy, "Driver does not have AP firmware image support for this hardware\n"); + rc = -ENOENT; goto err_stop_firmware; } } else { @@ -5901,6 +5902,7 @@ static int mwl8k_probe(struct pci_dev *pdev, priv->sram = pci_iomap(pdev, 0, 0x10000); if (priv->sram == NULL) { wiphy_err(hw->wiphy, "Cannot map device SRAM\n"); + rc = -EIO; goto err_iounmap; } @@ -5913,6 +5915,7 @@ static int mwl8k_probe(struct pci_dev *pdev, priv->regs = pci_iomap(pdev, 2, 0x10000); if (priv->regs == NULL) { wiphy_err(hw->wiphy, "Cannot map device registers\n"); + rc = -EIO; goto err_iounmap; } } -- cgit v0.10.2 From 662845057f2d063461c88a97b737ec7f66daece0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 19 Jan 2013 16:56:34 +0400 Subject: iwlegacy: don't return zero on failure paths in il4965_pci_probe() If hardware is not ready, il4965_pci_probe() breaks off initialization, deallocates all resources, but returns zero. The patch adds -EIO as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 10fc249..f1dc040 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6556,6 +6556,7 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) il4965_prepare_card_hw(il); if (!il->hw_ready) { IL_WARN("Failed, HW not ready\n"); + err = -EIO; goto out_iounmap; } -- cgit v0.10.2 From eee569e403861392dc693ab984ede5f0610dde29 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Sat, 19 Jan 2013 13:56:36 +0100 Subject: net: wireless/rtlwifi: fix uninitialized variable issue The use of variable packet_beacon might be uninitialized in the three files. Signed-off-by: Cong Ding Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index f9f3861..3c8754e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -452,7 +452,7 @@ static void _rtl92de_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; u16 type, cfc; __le16 fc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; hdr = (struct ieee80211_hdr *)tmp_buf; diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index 0e9f6eb..1864514 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -480,7 +480,7 @@ static void _rtl92se_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; __le16 fc; u16 type, cfc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index 87331d8..6645a50 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -247,7 +247,7 @@ static void _rtl8723ae_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *psaddr; __le16 fc; u16 type; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstatus->rx_drvinfo_size + pstatus->rx_bufshift; -- cgit v0.10.2 From 0a62acb1c9da58b54cb1c9fa6604a36507a61d48 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:52 +0100 Subject: ath9k: stop rx after tx Completing frame transmission can fail if the rx engine is stopped prematurely, as the hw might be waiting for an ACK from the other side. Shutting down tx before rx might make the DMA shutdown more reliable. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 32417fd..407199b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,10 +196,10 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - if (!ath_stoprecv(sc)) + if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - if (!ath_drain_all_txq(sc, retry_tx)) + if (!ath_stoprecv(sc)) ret = false; if (!flush) { -- cgit v0.10.2 From 1381559ba48a04ca7c98f1b4c487bd44d0b75db5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:53 +0100 Subject: ath9k: clean up processing of pending tx frames on reset Dropping packets from aggregation sessions is usually not a good idea, as it might upset the synchronization of the BlockAck receive window of the remote node. The use of the retry_tx parameter to reset/tx-drain functions also seemed a bit arbitrary. This patch removes this parameter altogether and ensures that pending tx frames are not dropped for no good reason. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 094a9322..885affd 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -334,9 +334,8 @@ void ath_txq_lock(struct ath_softc *sc, struct ath_txq *txq); void ath_txq_unlock(struct ath_softc *sc, struct ath_txq *txq); void ath_txq_unlock_complete(struct ath_softc *sc, struct ath_txq *txq); void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq); -bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx); -void ath_draintxq(struct ath_softc *sc, - struct ath_txq *txq, bool retry_tx); +bool ath_drain_all_txq(struct ath_softc *sc); +void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq); void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an); void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq); diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 531fffd..a129f83 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -198,7 +198,7 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw, if (sc->nvifs > 1) { ath_dbg(common, BEACON, "Flushing previous cabq traffic\n"); - ath_draintxq(sc, cabq, false); + ath_draintxq(sc, cabq); } } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 407199b..3e5082c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -182,7 +182,7 @@ static void ath_restart_work(struct ath_softc *sc) ath_start_ani(sc); } -static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) +static bool ath_prepare_reset(struct ath_softc *sc, bool flush) { struct ath_hw *ah = sc->sc_ah; bool ret = true; @@ -196,7 +196,7 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - if (!ath_drain_all_txq(sc, retry_tx)) + if (!ath_drain_all_txq(sc)) ret = false; if (!ath_stoprecv(sc)) @@ -255,8 +255,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) return true; } -static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, - bool retry_tx) +static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); @@ -280,7 +279,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, hchan = ah->curchan; } - if (!ath_prepare_reset(sc, retry_tx, flush)) + if (!ath_prepare_reset(sc, flush)) fastcc = false; ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", @@ -319,7 +318,7 @@ static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, if (test_bit(SC_OP_INVALID, &sc->sc_flags)) return -EIO; - r = ath_reset_internal(sc, hchan, false); + r = ath_reset_internal(sc, hchan); return r; } @@ -549,23 +548,21 @@ chip_reset: #undef SCHED_INTR } -static int ath_reset(struct ath_softc *sc, bool retry_tx) +static int ath_reset(struct ath_softc *sc) { - int r; + int i, r; ath9k_ps_wakeup(sc); - r = ath_reset_internal(sc, NULL, retry_tx); + r = ath_reset_internal(sc, NULL); - if (retry_tx) { - int i; - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (ATH_TXQ_SETUP(sc, i)) { - spin_lock_bh(&sc->tx.txq[i].axq_lock); - ath_txq_schedule(sc, &sc->tx.txq[i]); - spin_unlock_bh(&sc->tx.txq[i].axq_lock); - } - } + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (!ATH_TXQ_SETUP(sc, i)) + continue; + + spin_lock_bh(&sc->tx.txq[i].axq_lock); + ath_txq_schedule(sc, &sc->tx.txq[i]); + spin_unlock_bh(&sc->tx.txq[i].axq_lock); } ath9k_ps_restore(sc); @@ -586,7 +583,7 @@ void ath_reset_work(struct work_struct *work) { struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work); - ath_reset(sc, true); + ath_reset(sc); } /**********************/ @@ -804,7 +801,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_hw_cfg_gpio_input(ah, ah->led_pin); } - ath_prepare_reset(sc, false, true); + ath_prepare_reset(sc, true); if (sc->rx.frag) { dev_kfree_skb_any(sc->rx.frag); @@ -1816,11 +1813,11 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) if (drop) { ath9k_ps_wakeup(sc); spin_lock_bh(&sc->sc_pcu_lock); - drain_txq = ath_drain_all_txq(sc, false); + drain_txq = ath_drain_all_txq(sc); spin_unlock_bh(&sc->sc_pcu_lock); if (!drain_txq) - ath_reset(sc, false); + ath_reset(sc); ath9k_ps_restore(sc); ieee80211_wake_queues(hw); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ca4a034..ac9ee67 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -378,7 +378,7 @@ static void ath_tx_count_frames(struct ath_softc *sc, struct ath_buf *bf, static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, struct ath_buf *bf, struct list_head *bf_q, - struct ath_tx_status *ts, int txok, bool retry) + struct ath_tx_status *ts, int txok) { struct ath_node *an = NULL; struct sk_buff *skb; @@ -490,7 +490,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, } else if (!isaggr && txok) { /* transmit completion */ acked_cnt++; - } else if ((tid->state & AGGR_CLEANUP) || !retry) { + } else if (tid->state & AGGR_CLEANUP) { /* * cleanup in progress, just fail * the un-acked sub-frames @@ -1331,23 +1331,6 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid /* Queue Management */ /********************/ -static void ath_txq_drain_pending_buffers(struct ath_softc *sc, - struct ath_txq *txq) -{ - struct ath_atx_ac *ac, *ac_tmp; - struct ath_atx_tid *tid, *tid_tmp; - - list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) { - list_del(&ac->list); - ac->sched = false; - list_for_each_entry_safe(tid, tid_tmp, &ac->tid_q, list) { - list_del(&tid->list); - tid->sched = false; - ath_tid_drain(sc, txq, tid); - } - } -} - struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) { struct ath_hw *ah = sc->sc_ah; @@ -1477,7 +1460,7 @@ static bool bf_is_ampdu_not_probing(struct ath_buf *bf) } static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, - struct list_head *list, bool retry_tx) + struct list_head *list) { struct ath_buf *bf, *lastbf; struct list_head bf_head; @@ -1505,8 +1488,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, txq->axq_ampdu_depth--; if (bf_isampdu(bf)) - ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0, - retry_tx); + ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0); else ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); } @@ -1518,7 +1500,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, * This assumes output has been stopped and * we do not need to block ath_tx_tasklet. */ -void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) +void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq) { ath_txq_lock(sc, txq); @@ -1526,8 +1508,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) int idx = txq->txq_tailidx; while (!list_empty(&txq->txq_fifo[idx])) { - ath_drain_txq_list(sc, txq, &txq->txq_fifo[idx], - retry_tx); + ath_drain_txq_list(sc, txq, &txq->txq_fifo[idx]); INCR(idx, ATH_TXFIFO_DEPTH); } @@ -1536,16 +1517,12 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) txq->axq_link = NULL; txq->axq_tx_inprogress = false; - ath_drain_txq_list(sc, txq, &txq->axq_q, retry_tx); - - /* flush any pending frames if aggregation is enabled */ - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) && !retry_tx) - ath_txq_drain_pending_buffers(sc, txq); + ath_drain_txq_list(sc, txq, &txq->axq_q); ath_txq_unlock_complete(sc, txq); } -bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) +bool ath_drain_all_txq(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(sc->sc_ah); @@ -1581,7 +1558,7 @@ bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) */ txq = &sc->tx.txq[i]; txq->stopped = false; - ath_draintxq(sc, txq, retry_tx); + ath_draintxq(sc, txq); } return !npend; @@ -2191,7 +2168,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); } else - ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok, true); + ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) ath_txq_schedule(sc, txq); -- cgit v0.10.2 From 81b519504f3b2e72c8ff282a03ecc01879f28e31 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:54 +0100 Subject: ath9k: use ath_tx_process_buffer instead of open-coding similar code Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ac9ee67..feacaaf 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -604,6 +604,37 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath9k_queue_reset(sc, RESET_TYPE_TX_ERROR); } +static bool bf_is_ampdu_not_probing(struct ath_buf *bf) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu); + return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); +} + +static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, + struct ath_tx_status *ts, struct ath_buf *bf, + struct list_head *bf_head) +{ + bool txok, flush; + + txok = !(ts->ts_status & ATH9K_TXERR_MASK); + flush = !!(ts->ts_status & ATH9K_TX_FLUSH); + txq->axq_tx_inprogress = false; + + txq->axq_depth--; + if (bf_is_ampdu_not_probing(bf)) + txq->axq_ampdu_depth--; + + if (!bf_isampdu(bf)) { + if (!flush) + ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); + ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); + } else + ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); + + if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) && !flush) + ath_txq_schedule(sc, txq); +} + static bool ath_lookup_legacy(struct ath_buf *bf) { struct sk_buff *skb; @@ -1453,12 +1484,6 @@ int ath_cabq_update(struct ath_softc *sc) return 0; } -static bool bf_is_ampdu_not_probing(struct ath_buf *bf) -{ - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu); - return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); -} - static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, struct list_head *list) { @@ -1482,15 +1507,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, lastbf = bf->bf_lastbf; list_cut_position(&bf_head, list, &lastbf->list); - - txq->axq_depth--; - if (bf_is_ampdu_not_probing(bf)) - txq->axq_ampdu_depth--; - - if (bf_isampdu(bf)) - ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0); - else - ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); + ath_tx_process_buffer(sc, txq, &ts, bf, &bf_head); } } @@ -2152,28 +2169,6 @@ static void ath_tx_rc_status(struct ath_softc *sc, struct ath_buf *bf, tx_info->status.rates[tx_rateindex].count = ts->ts_longretry + 1; } -static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, - struct ath_tx_status *ts, struct ath_buf *bf, - struct list_head *bf_head) -{ - int txok; - - txq->axq_depth--; - txok = !(ts->ts_status & ATH9K_TXERR_MASK); - txq->axq_tx_inprogress = false; - if (bf_is_ampdu_not_probing(bf)) - txq->axq_ampdu_depth--; - - if (!bf_isampdu(bf)) { - ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); - ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); - } else - ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); - - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) - ath_txq_schedule(sc, txq); -} - static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) { struct ath_hw *ah = sc->sc_ah; -- cgit v0.10.2 From 0166b4beec575f9740b7a0843675173c2e00cdbc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:55 +0100 Subject: ath9k_hw: make the initval parameter to ath9k_hw_write_array const Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index a7448d1..0d84c1c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -203,7 +203,7 @@ void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, udelay(hw_delay + BASE_ACTIVATE_DELAY); } -void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, +void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array, int column, unsigned int *writecnt) { int r; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 195613f..13b97e7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1013,7 +1013,7 @@ void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, int hw_delay); bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); -void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, +void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array, int column, unsigned int *writecnt); u32 ath9k_hw_reverse_bits(u32 val, u32 n); u16 ath9k_hw_computetxtime(struct ath_hw *ah, -- cgit v0.10.2 From f5ffe23aa0a8f6512952cf393daf86cbd6e4685d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:57 +0100 Subject: ath9k_hw: remove ath9k_hw_ani_setup and its variables They are no longer needed for ANI functionality Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index e09ec40..2978287 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -489,23 +489,6 @@ void ath9k_hw_disable_mib_counters(struct ath_hw *ah) } EXPORT_SYMBOL(ath9k_hw_disable_mib_counters); -void ath9k_hw_ani_setup(struct ath_hw *ah) -{ - int i; - - static const int totalSizeDesired[] = { -55, -55, -55, -55, -62 }; - static const int coarseHigh[] = { -14, -14, -14, -14, -12 }; - static const int coarseLow[] = { -64, -64, -64, -64, -70 }; - static const int firpwr[] = { -78, -78, -78, -78, -80 }; - - for (i = 0; i < 5; i++) { - ah->totalSizeDesired[i] = totalSizeDesired[i]; - ah->coarse_high[i] = coarseHigh[i]; - ah->coarse_low[i] = coarseLow[i]; - ah->firpwr[i] = firpwr[i]; - } -} - void ath9k_hw_ani_init(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h index 1485bf5..385bdba 100644 --- a/drivers/net/wireless/ath/ath9k/ani.h +++ b/drivers/net/wireless/ath/ath9k/ani.h @@ -147,7 +147,6 @@ struct ar5416Stats { void ath9k_enable_mib_counters(struct ath_hw *ah); void ath9k_hw_disable_mib_counters(struct ath_hw *ah); -void ath9k_hw_ani_setup(struct ath_hw *ah); void ath9k_hw_ani_init(struct ath_hw *ah); #endif /* ANI_H */ diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 0d84c1c..42cf3c7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -549,10 +549,8 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah)); - if (ah->config.enable_ani) { - ath9k_hw_ani_setup(ah); + if (ah->config.enable_ani) ath9k_hw_ani_init(ah); - } return 0; } diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 13b97e7..0a3a1af 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -864,10 +864,6 @@ struct ath_hw { /* ANI */ u32 proc_phyerr; u32 aniperiod; - int totalSizeDesired[5]; - int coarse_high[5]; - int coarse_low[5]; - int firpwr[5]; enum ath9k_ani_cmd ani_function; u32 ani_skip_count; -- cgit v0.10.2 From 9dbac67da314ccdab3bb7f429b4936e59d5389b7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:58 +0100 Subject: ath9k_hw: reduce struct ar5416AniState size It is kept per-channel, so removing unnecessary (or constant) fields from it can save quite a bit of memory. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 2978287..a9218a1 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -152,7 +152,8 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, ath_dbg(common, ANI, "**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n", aniState->ofdmNoiseImmunityLevel, immunityLevel, BEACON_RSSI(ah), - aniState->rssiThrLow, aniState->rssiThrHigh); + ATH9K_ANI_RSSI_THR_LOW, + ATH9K_ANI_RSSI_THR_HIGH); if (!scan) aniState->ofdmNoiseImmunityLevel = immunityLevel; @@ -173,7 +174,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, weak_sig = entry_ofdm->ofdm_weak_signal_on; if (ah->opmode == NL80211_IFTYPE_STATION && - BEACON_RSSI(ah) <= aniState->rssiThrHigh) + BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH) weak_sig = true; if (aniState->ofdmWeakSigDetect != weak_sig) @@ -216,11 +217,11 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel, ath_dbg(common, ANI, "**** ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n", aniState->cckNoiseImmunityLevel, immunityLevel, - BEACON_RSSI(ah), aniState->rssiThrLow, - aniState->rssiThrHigh); + BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW, + ATH9K_ANI_RSSI_THR_HIGH); if (ah->opmode == NL80211_IFTYPE_STATION && - BEACON_RSSI(ah) <= aniState->rssiThrLow && + BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW && immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI) immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI; @@ -514,8 +515,6 @@ void ath9k_hw_ani_init(struct ath_hw *ah) ani->ofdmsTurn = true; - ani->rssiThrHigh = ATH9K_ANI_RSSI_THR_HIGH; - ani->rssiThrLow = ATH9K_ANI_RSSI_THR_LOW; ani->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG; ani->cckNoiseImmunityLevel = ATH9K_ANI_CCK_DEF_LEVEL; ani->ofdmNoiseImmunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL; diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h index 385bdba..dddb136 100644 --- a/drivers/net/wireless/ath/ath9k/ani.h +++ b/drivers/net/wireless/ath/ath9k/ani.h @@ -104,7 +104,6 @@ struct ath9k_ani_default { }; struct ar5416AniState { - struct ath9k_channel *c; u8 noiseImmunityLevel; u8 ofdmNoiseImmunityLevel; u8 cckNoiseImmunityLevel; @@ -113,15 +112,9 @@ struct ar5416AniState { u8 spurImmunityLevel; u8 firstepLevel; u8 ofdmWeakSigDetect; - u8 cckWeakSigThreshold; u32 listenTime; - int32_t rssiThrLow; - int32_t rssiThrHigh; u32 ofdmPhyErrCount; u32 cckPhyErrCount; - int16_t pktRssi[2]; - int16_t ofdmErrRssi[2]; - int16_t cckErrRssi[2]; struct ath9k_ani_default iniDef; }; -- cgit v0.10.2 From c5e818ef081c4144177fdbdeed154332cd7e4d7a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:59 +0100 Subject: ath9k_hw: remove a useless WARN_ON &ah->curchan->ani can never be NULL Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index a9218a1..7ecd40f 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -419,9 +419,6 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan) return; aniState = &ah->curchan->ani; - if (WARN_ON(!aniState)) - return; - if (!ath9k_hw_ani_read_counters(ah)) return; -- cgit v0.10.2 From fe038884a83b85f2bb61c77609eacb5cf613d3fb Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 16 Jan 2013 16:15:34 +0200 Subject: Bluetooth: Fix Class of Device indication when powering off When a HCI device is powered off the Management interface specification dictates that the class of device value is indicated as zero. This patch fixes sending of the appropriate class of device changed event when a HCI device is powered off. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index fc171f2..54f3ddba 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2987,7 +2987,13 @@ int mgmt_powered(struct hci_dev *hdev, u8 powered) } } else { u8 status = MGMT_STATUS_NOT_POWERED; + u8 zero_cod[] = { 0, 0, 0 }; + mgmt_pending_foreach(0, hdev, cmd_status_rsp, &status); + + if (memcmp(hdev->dev_class, zero_cod, sizeof(zero_cod)) != 0) + mgmt_event(MGMT_EV_CLASS_OF_DEV_CHANGED, hdev, + zero_cod, sizeof(zero_cod), NULL); } err = new_settings(hdev, match.sk); -- cgit v0.10.2 From f950a30e2433f049c17fc47caced1397d25373a6 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Fri, 18 Jan 2013 12:48:07 +0100 Subject: Bluetooth: Fix pair device command reply if adapter is powered off According to Bluetooth Management API specification Pair Device Command should generate command complete event on both success and failure. This fix replying with command status (which lacks address info) when adapter is powered off. Signed-off-by: Szymon Janc Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 54f3ddba..36b2310 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1939,11 +1939,15 @@ static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG(""); + memset(&rp, 0, sizeof(rp)); + bacpy(&rp.addr.bdaddr, &cp->addr.bdaddr); + rp.addr.type = cp->addr.type; + hci_dev_lock(hdev); if (!hdev_is_powered(hdev)) { - err = cmd_status(sk, hdev->id, MGMT_OP_PAIR_DEVICE, - MGMT_STATUS_NOT_POWERED); + err = cmd_complete(sk, hdev->id, MGMT_OP_PAIR_DEVICE, + MGMT_STATUS_NOT_POWERED, &rp, sizeof(rp)); goto unlock; } @@ -1960,10 +1964,6 @@ static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data, conn = hci_connect(hdev, LE_LINK, &cp->addr.bdaddr, cp->addr.type, sec_level, auth_type); - memset(&rp, 0, sizeof(rp)); - bacpy(&rp.addr.bdaddr, &cp->addr.bdaddr); - rp.addr.type = cp->addr.type; - if (IS_ERR(conn)) { int status; -- cgit v0.10.2 From 4ae14301c3b180adaf6b72285499e7404819a023 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:13 +0200 Subject: Bluetooth: Fix checking for correct mgmt_load_link_keys parameters The debug_keys parameter is only allowed to have the values 0x00 and 0x01. Any other value should result in a proper command status with MGMT_STATUS_INVALID_PARAMS. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 36b2310..d9b042e 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1519,6 +1519,10 @@ static int load_link_keys(struct sock *sk, struct hci_dev *hdev, void *data, MGMT_STATUS_INVALID_PARAMS); } + if (cp->debug_keys != 0x00 && cp->debug_keys != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_LOAD_LINK_KEYS, + MGMT_STATUS_INVALID_PARAMS); + BT_DBG("%s debug_keys %u key_count %u", hdev->name, cp->debug_keys, key_count); -- cgit v0.10.2 From e57e619f463e7841940ef1b98969e23f71f5ee8a Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:14 +0200 Subject: Bluetooth: Fix returning proper mgmt status for Load LTKs Failures of mgmt commands should be indicated with valid mgmt status codes, and EINVAL is not one of them. Instead MGMT_STATUS_INVALID_PARAMS should be returned. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index d9b042e..a050eee 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2716,7 +2716,7 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, BT_ERR("load_keys: expected %u bytes, got %u bytes", len, expected_len); return cmd_status(sk, hdev->id, MGMT_OP_LOAD_LONG_TERM_KEYS, - EINVAL); + MGMT_STATUS_INVALID_PARAMS); } BT_DBG("%s key_count %u", hdev->name, key_count); -- cgit v0.10.2 From 54ad6d8a5afe1a6d162d8d229a3d8fc48b254d24 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:15 +0200 Subject: Bluetooth: Fix checking for proper key->master value in Load LTKs The allowed values for the key->master parameter in the Load LTKs command are 0x00 and 0x01. If there is a key in the list with some other value the command should fail with a proper invalid params response. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index a050eee..c7ec47c 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2721,6 +2721,15 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, BT_DBG("%s key_count %u", hdev->name, key_count); + for (i = 0; i < key_count; i++) { + struct mgmt_ltk_info *key = &cp->keys[i]; + + if (key->master != 0x00 && key->master != 0x01) + return cmd_status(sk, hdev->id, + MGMT_OP_LOAD_LONG_TERM_KEYS, + MGMT_STATUS_INVALID_PARAMS); + } + hci_dev_lock(hdev); hci_smp_ltks_clear(hdev); -- cgit v0.10.2 From 3f706b7205456c90cdc91e21eab36e2fcf4a8bce Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:16 +0200 Subject: Bluetooth: Refactor valid LTK data testing into its own function This patch refactors valid LTK data testing into its own function. This will help keep the code readable since there are several tests still missing that need to be done on the LTK data. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index c7ec47c..cd75899 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2701,6 +2701,13 @@ done: return err; } +static bool ltk_is_valid(struct mgmt_ltk_info *key) +{ + if (key->master != 0x00 && key->master != 0x01) + return false; + return true; +} + static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, void *cp_data, u16 len) { @@ -2724,7 +2731,7 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, for (i = 0; i < key_count; i++) { struct mgmt_ltk_info *key = &cp->keys[i]; - if (key->master != 0x00 && key->master != 0x01) + if (!ltk_is_valid(key)) return cmd_status(sk, hdev->id, MGMT_OP_LOAD_LONG_TERM_KEYS, MGMT_STATUS_INVALID_PARAMS); -- cgit v0.10.2 From 44b20d33962a73ca14b934540e9168e0da1b49ab Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:17 +0200 Subject: Bluetooth: Check for valid key->authenticated value for LTKs This patch adds necessary checks for the two allowed values of the authenticated parameter of each Long Term Key, i.e. 0x00 and 0x01. If any other value is encountered the valid response is to return invalid params to user space. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index cd75899..bc04c44 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2703,6 +2703,8 @@ done: static bool ltk_is_valid(struct mgmt_ltk_info *key) { + if (key->authenticated != 0x00 && key->authenticated != 0x01) + return false; if (key->master != 0x00 && key->master != 0x01) return false; return true; -- cgit v0.10.2 From 679efe2b4fcbe575bc4c94c410039e35c169bfb6 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:18 +0200 Subject: Bluetooth: Add helper functions for testing bdaddr types This patch adds two helper functions to test for valid bdaddr type values. These will be particularely useful in the mgmt code to check that user space has passed valid values to the kernel. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 2554b3f..9531bee 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -166,6 +166,29 @@ typedef struct { #define BDADDR_LE_PUBLIC 0x01 #define BDADDR_LE_RANDOM 0x02 +static inline bool bdaddr_type_is_valid(__u8 type) +{ + switch (type) { + case BDADDR_BREDR: + case BDADDR_LE_PUBLIC: + case BDADDR_LE_RANDOM: + return true; + } + + return false; +} + +static inline bool bdaddr_type_is_le(__u8 type) +{ + switch (type) { + case BDADDR_LE_PUBLIC: + case BDADDR_LE_RANDOM: + return true; + } + + return false; +} + #define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0} }) #define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff} }) -- cgit v0.10.2 From 4ee71b2017336f68128515bdbe7c946a39aa9250 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:19 +0200 Subject: Bluetooth: Fix checking for valid address type values in mgmt commands This patch adds checks for valid address type values passed to mgmt commands. If an invalid address type is encountered the code will return a proper invalid params response. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index bc04c44..7dd2de1 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1526,6 +1526,14 @@ static int load_link_keys(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("%s debug_keys %u key_count %u", hdev->name, cp->debug_keys, key_count); + for (i = 0; i < key_count; i++) { + struct mgmt_link_key_info *key = &cp->keys[i]; + + if (key->addr.type != BDADDR_BREDR) + return cmd_status(sk, hdev->id, MGMT_OP_LOAD_LINK_KEYS, + MGMT_STATUS_INVALID_PARAMS); + } + hci_dev_lock(hdev); hci_link_keys_clear(hdev); @@ -1573,12 +1581,17 @@ static int unpair_device(struct sock *sk, struct hci_dev *hdev, void *data, struct hci_conn *conn; int err; - hci_dev_lock(hdev); - memset(&rp, 0, sizeof(rp)); bacpy(&rp.addr.bdaddr, &cp->addr.bdaddr); rp.addr.type = cp->addr.type; + if (!bdaddr_type_is_valid(cp->addr.type)) + return cmd_complete(sk, hdev->id, MGMT_OP_UNPAIR_DEVICE, + MGMT_STATUS_INVALID_PARAMS, + &rp, sizeof(rp)); + + hci_dev_lock(hdev); + if (!hdev_is_powered(hdev)) { err = cmd_complete(sk, hdev->id, MGMT_OP_UNPAIR_DEVICE, MGMT_STATUS_NOT_POWERED, &rp, sizeof(rp)); @@ -1643,6 +1656,10 @@ static int disconnect(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG(""); + if (!bdaddr_type_is_valid(cp->addr.type)) + return cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); if (!test_bit(HCI_UP, &hdev->flags)) { @@ -1947,6 +1964,11 @@ static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data, bacpy(&rp.addr.bdaddr, &cp->addr.bdaddr); rp.addr.type = cp->addr.type; + if (!bdaddr_type_is_valid(cp->addr.type)) + return cmd_complete(sk, hdev->id, MGMT_OP_PAIR_DEVICE, + MGMT_STATUS_INVALID_PARAMS, + &rp, sizeof(rp)); + hci_dev_lock(hdev); if (!hdev_is_powered(hdev)) { @@ -2564,6 +2586,10 @@ static int block_device(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("%s", hdev->name); + if (!bdaddr_type_is_valid(cp->addr.type)) + return cmd_status(sk, hdev->id, MGMT_OP_BLOCK_DEVICE, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); err = hci_blacklist_add(hdev, &cp->addr.bdaddr, cp->addr.type); @@ -2589,6 +2615,10 @@ static int unblock_device(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("%s", hdev->name); + if (!bdaddr_type_is_valid(cp->addr.type)) + return cmd_status(sk, hdev->id, MGMT_OP_UNBLOCK_DEVICE, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); err = hci_blacklist_del(hdev, &cp->addr.bdaddr, cp->addr.type); @@ -2707,6 +2737,8 @@ static bool ltk_is_valid(struct mgmt_ltk_info *key) return false; if (key->master != 0x00 && key->master != 0x01) return false; + if (!bdaddr_type_is_le(key->addr.type)) + return false; return true; } -- cgit v0.10.2 From 118da70b760f04bb2b8130ced97a9f9cc173440a Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:20 +0200 Subject: Bluetooth: Fix checking for valid disconnect parameters in unpair_device The valid values for the Disconnect parameter in the Unpair Device command are 0x00 and 0x01. If any other value is encountered the command should fail with the appropriate invalid params response. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 7dd2de1..e5e865d 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1590,6 +1590,11 @@ static int unpair_device(struct sock *sk, struct hci_dev *hdev, void *data, MGMT_STATUS_INVALID_PARAMS, &rp, sizeof(rp)); + if (cp->disconnect != 0x00 && cp->disconnect != 0x01) + return cmd_complete(sk, hdev->id, MGMT_OP_UNPAIR_DEVICE, + MGMT_STATUS_INVALID_PARAMS, + &rp, sizeof(rp)); + hci_dev_lock(hdev); if (!hdev_is_powered(hdev)) { -- cgit v0.10.2 From 06a63b19e9eb90402e465d60d4c2564afd3ca211 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:21 +0200 Subject: Bluetooth: Fix returning proper cmd_complete for mgmt_disconnect The Disconnect Management command should return Command Complete instead of Command Status whenever possible so that user space can distinguish exactly which command failed in the case of multiple commands. This patch does the necessary changes in the disconnect command handler to return the right event to user space. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index e5e865d..7b8bc7c 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1654,6 +1654,7 @@ static int disconnect(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_cp_disconnect *cp = data; + struct mgmt_rp_disconnect rp; struct hci_cp_disconnect dc; struct pending_cmd *cmd; struct hci_conn *conn; @@ -1661,21 +1662,26 @@ static int disconnect(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG(""); + memset(&rp, 0, sizeof(rp)); + bacpy(&rp.addr.bdaddr, &cp->addr.bdaddr); + rp.addr.type = cp->addr.type; + if (!bdaddr_type_is_valid(cp->addr.type)) - return cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, - MGMT_STATUS_INVALID_PARAMS); + return cmd_complete(sk, hdev->id, MGMT_OP_DISCONNECT, + MGMT_STATUS_INVALID_PARAMS, + &rp, sizeof(rp)); hci_dev_lock(hdev); if (!test_bit(HCI_UP, &hdev->flags)) { - err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, - MGMT_STATUS_NOT_POWERED); + err = cmd_complete(sk, hdev->id, MGMT_OP_DISCONNECT, + MGMT_STATUS_NOT_POWERED, &rp, sizeof(rp)); goto failed; } if (mgmt_pending_find(MGMT_OP_DISCONNECT, hdev)) { - err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, - MGMT_STATUS_BUSY); + err = cmd_complete(sk, hdev->id, MGMT_OP_DISCONNECT, + MGMT_STATUS_BUSY, &rp, sizeof(rp)); goto failed; } @@ -1686,8 +1692,8 @@ static int disconnect(struct sock *sk, struct hci_dev *hdev, void *data, conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr); if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) { - err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, - MGMT_STATUS_NOT_CONNECTED); + err = cmd_complete(sk, hdev->id, MGMT_OP_DISCONNECT, + MGMT_STATUS_NOT_CONNECTED, &rp, sizeof(rp)); goto failed; } -- cgit v0.10.2 From 5d0846d416a6c8b7fda1b24aa7369818a7dfa00e Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 20 Jan 2013 14:27:22 +0200 Subject: Bluetooth: Fix returning proper cmd_complete for mgmt_block/unblock The Block/Unblock Device Management commands should return Command Complete instead of Command Status whenever possible so that user space can distinguish exactly which command failed in the case of multiple commands. This patch does the necessary changes in the command handler to return the right event to user space. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 7b8bc7c..e7f944f 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2598,8 +2598,9 @@ static int block_device(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("%s", hdev->name); if (!bdaddr_type_is_valid(cp->addr.type)) - return cmd_status(sk, hdev->id, MGMT_OP_BLOCK_DEVICE, - MGMT_STATUS_INVALID_PARAMS); + return cmd_complete(sk, hdev->id, MGMT_OP_BLOCK_DEVICE, + MGMT_STATUS_INVALID_PARAMS, + &cp->addr, sizeof(cp->addr)); hci_dev_lock(hdev); @@ -2627,8 +2628,9 @@ static int unblock_device(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("%s", hdev->name); if (!bdaddr_type_is_valid(cp->addr.type)) - return cmd_status(sk, hdev->id, MGMT_OP_UNBLOCK_DEVICE, - MGMT_STATUS_INVALID_PARAMS); + return cmd_complete(sk, hdev->id, MGMT_OP_UNBLOCK_DEVICE, + MGMT_STATUS_INVALID_PARAMS, + &cp->addr, sizeof(cp->addr)); hci_dev_lock(hdev); -- cgit v0.10.2 From 60e77321985ab599fac010afdc465c3e30281a06 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 22 Jan 2013 14:01:59 +0200 Subject: Bluetooth: Add LE Local Features reading support To be able to make the appropriate decisions for some LE procedures we need to know the LE features that the local controller supports. Therefore, it's important to have the LE Read Local Supported Features HCI comand as part of the HCI init sequence. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 45eee08..521eefa 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -943,6 +943,12 @@ struct hci_rp_le_read_buffer_size { __u8 le_max_pkt; } __packed; +#define HCI_OP_LE_READ_LOCAL_FEATURES 0x2003 +struct hci_rp_le_read_local_features { + __u8 status; + __u8 features[8]; +} __packed; + #define HCI_OP_LE_READ_ADV_TX_POWER 0x2007 struct hci_rp_le_read_adv_tx_power { __u8 status; diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 769a740..3f607c9 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -152,6 +152,7 @@ struct hci_dev { __u8 minor_class; __u8 features[8]; __u8 host_features[8]; + __u8 le_features[8]; __u8 commands[64]; __u8 hci_ver; __u16 hci_rev; diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 705078a..07c8c79 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -609,6 +609,9 @@ static void le_setup(struct hci_dev *hdev) /* Read LE Buffer Size */ hci_send_cmd(hdev, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL); + /* Read LE Local Supported Features */ + hci_send_cmd(hdev, HCI_OP_LE_READ_LOCAL_FEATURES, 0, NULL); + /* Read LE Advertising Channel TX Power */ hci_send_cmd(hdev, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL); } @@ -1090,6 +1093,19 @@ static void hci_cc_le_read_buffer_size(struct hci_dev *hdev, hci_req_complete(hdev, HCI_OP_LE_READ_BUFFER_SIZE, rp->status); } +static void hci_cc_le_read_local_features(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct hci_rp_le_read_local_features *rp = (void *) skb->data; + + BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); + + if (!rp->status) + memcpy(hdev->le_features, rp->features, 8); + + hci_req_complete(hdev, HCI_OP_LE_READ_LOCAL_FEATURES, rp->status); +} + static void hci_cc_le_read_adv_tx_power(struct hci_dev *hdev, struct sk_buff *skb) { @@ -2628,6 +2644,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) hci_cc_le_read_buffer_size(hdev, skb); break; + case HCI_OP_LE_READ_LOCAL_FEATURES: + hci_cc_le_read_local_features(hdev, skb); + break; + case HCI_OP_LE_READ_ADV_TX_POWER: hci_cc_le_read_adv_tx_power(hdev, skb); break; -- cgit v0.10.2 From cf1d081f6597a45e5ff63f55c893494a8ae1cdaf Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 22 Jan 2013 14:02:00 +0200 Subject: Bluetooth: Add support for reading LE White List Size The LE White List Size is necessary to be known before attempting to feed the controller with any addresses intended for the white list. This patch adds the necessary HCI command sending to the HCI init sequence. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 521eefa..f1766a6 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1001,6 +1001,12 @@ struct hci_cp_le_create_conn { #define HCI_OP_LE_CREATE_CONN_CANCEL 0x200e +#define HCI_OP_LE_READ_WHITE_LIST_SIZE 0x200f +struct hci_rp_le_read_white_list_size { + __u8 status; + __u8 size; +} __packed; + #define HCI_OP_LE_CONN_UPDATE 0x2013 struct hci_cp_le_conn_update { __le16 handle; diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 3f607c9..d6ed4ac 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -153,6 +153,7 @@ struct hci_dev { __u8 features[8]; __u8 host_features[8]; __u8 le_features[8]; + __u8 le_white_list_size; __u8 commands[64]; __u8 hci_ver; __u16 hci_rev; diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 07c8c79..d2fee64 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -614,6 +614,9 @@ static void le_setup(struct hci_dev *hdev) /* Read LE Advertising Channel TX Power */ hci_send_cmd(hdev, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL); + + /* Read LE White List Size */ + hci_send_cmd(hdev, HCI_OP_LE_READ_WHITE_LIST_SIZE, 0, NULL); } static void hci_setup(struct hci_dev *hdev) @@ -1306,6 +1309,19 @@ static void hci_cc_le_set_scan_enable(struct hci_dev *hdev, } } +static void hci_cc_le_read_white_list_size(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct hci_rp_le_read_white_list_size *rp = (void *) skb->data; + + BT_DBG("%s status 0x%2.2x size %u", hdev->name, rp->status, rp->size); + + if (!rp->status) + hdev->le_white_list_size = rp->size; + + hci_req_complete(hdev, HCI_OP_LE_READ_WHITE_LIST_SIZE, rp->status); +} + static void hci_cc_le_ltk_reply(struct hci_dev *hdev, struct sk_buff *skb) { struct hci_rp_le_ltk_reply *rp = (void *) skb->data; @@ -2684,6 +2700,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) hci_cc_le_set_scan_enable(hdev, skb); break; + case HCI_OP_LE_READ_WHITE_LIST_SIZE: + hci_cc_le_read_white_list_size(hdev, skb); + break; + case HCI_OP_LE_LTK_REPLY: hci_cc_le_ltk_reply(hdev, skb); break; -- cgit v0.10.2 From 9b008c0457e583e10e62d1215bed6ab26ee54906 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 22 Jan 2013 14:02:01 +0200 Subject: Bluetooth: Add support for reading LE supported states The LE supported states indicate the states and state combinations that the link layer supports. This is important information for knowing what operations are possible when dealing with multiple connected devices. This patch adds reading of the supported states to the HCI init sequence. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index f1766a6..7f12c25f 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1045,6 +1045,12 @@ struct hci_rp_le_ltk_neg_reply { __le16 handle; } __packed; +#define HCI_OP_LE_READ_SUPPORTED_STATES 0x201c +struct hci_rp_le_read_supported_states { + __u8 status; + __u8 le_states[8]; +} __packed; + /* ---- HCI Events ---- */ #define HCI_EV_INQUIRY_COMPLETE 0x01 diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index d6ed4ac..bcf8ffe 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -154,6 +154,7 @@ struct hci_dev { __u8 host_features[8]; __u8 le_features[8]; __u8 le_white_list_size; + __u8 le_states[8]; __u8 commands[64]; __u8 hci_ver; __u16 hci_rev; diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index d2fee64..d4fcba6 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -617,6 +617,9 @@ static void le_setup(struct hci_dev *hdev) /* Read LE White List Size */ hci_send_cmd(hdev, HCI_OP_LE_READ_WHITE_LIST_SIZE, 0, NULL); + + /* Read LE Supported States */ + hci_send_cmd(hdev, HCI_OP_LE_READ_SUPPORTED_STATES, 0, NULL); } static void hci_setup(struct hci_dev *hdev) @@ -1346,6 +1349,19 @@ static void hci_cc_le_ltk_neg_reply(struct hci_dev *hdev, struct sk_buff *skb) hci_req_complete(hdev, HCI_OP_LE_LTK_NEG_REPLY, rp->status); } +static void hci_cc_le_read_supported_states(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct hci_rp_le_read_supported_states *rp = (void *) skb->data; + + BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); + + if (!rp->status) + memcpy(hdev->le_states, rp->le_states, 8); + + hci_req_complete(hdev, HCI_OP_LE_READ_SUPPORTED_STATES, rp->status); +} + static void hci_cc_write_le_host_supported(struct hci_dev *hdev, struct sk_buff *skb) { @@ -2712,6 +2728,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) hci_cc_le_ltk_neg_reply(hdev, skb); break; + case HCI_OP_LE_READ_SUPPORTED_STATES: + hci_cc_le_read_supported_states(hdev, skb); + break; + case HCI_OP_WRITE_LE_HOST_SUPPORTED: hci_cc_write_le_host_supported(hdev, skb); break; -- cgit v0.10.2 From 9647bb80a501a34f06132a04e240156950570005 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Jan 2013 17:22:07 +0000 Subject: ipv6: remove duplicated declaration of ip6_fragment() It is declared in: include/net/ip6_route.h:187:int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)); and net/ip6_route.h is already included. Cc: YOSHIFUJI Hideaki Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 7eee94c..7dea45a 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -56,8 +56,6 @@ #include #include -int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)); - int __ip6_local_out(struct sk_buff *skb) { int len; -- cgit v0.10.2 From e39363a9def53dd4086be107dc8b3ebca09f045d Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Jan 2013 17:39:11 +0000 Subject: netpoll: fix an uninitialized variable Fengguang reported: net/core/netpoll.c: In function 'netpoll_setup': net/core/netpoll.c:1049:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] in !CONFIG_IPV6 case, we may error out without initializing 'err'. Reported-by: Fengguang Wu Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index a9b1004..e2f79a1 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -1140,6 +1140,7 @@ int netpoll_setup(struct netpoll *np) #else np_err(np, "IPv6 is not supported %s, aborting\n", np->dev_name); + err = -EINVAL; goto put; #endif } -- cgit v0.10.2 From f94161c1bbdf7af11729cf106b4452f2432448e0 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:24 +0000 Subject: netfilter: nf_conntrack: move initialization out of pernet operations nf_conntrack initialization and cleanup codes happens in pernet operations function. This task should be done in module_init/exit. We can't use init_net to identify if it's the right time to initialize or cleanup since we cannot make assumption on the order netns are created/destroyed. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h index e98aeb3..e05c1f6 100644 --- a/include/net/netfilter/nf_conntrack_core.h +++ b/include/net/netfilter/nf_conntrack_core.h @@ -25,12 +25,16 @@ extern unsigned int nf_conntrack_in(struct net *net, unsigned int hooknum, struct sk_buff *skb); -extern int nf_conntrack_init(struct net *net); -extern void nf_conntrack_cleanup(struct net *net); +extern int nf_conntrack_init_net(struct net *net); +extern void nf_conntrack_cleanup_net(struct net *net); extern int nf_conntrack_proto_init(struct net *net); extern void nf_conntrack_proto_fini(struct net *net); +extern int nf_conntrack_init_start(void); +extern void nf_conntrack_cleanup_start(void); + +extern void nf_conntrack_init_end(void); extern void nf_conntrack_cleanup_end(void); extern bool diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 85aa4b7..fb3e514 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1334,8 +1334,14 @@ static int untrack_refs(void) return cnt; } -static void nf_conntrack_cleanup_init_net(void) +void nf_conntrack_cleanup_start(void) { + RCU_INIT_POINTER(ip_ct_attach, NULL); +} + +void nf_conntrack_cleanup_end(void) +{ + RCU_INIT_POINTER(nf_ct_destroy, NULL); while (untrack_refs() > 0) schedule(); @@ -1344,8 +1350,18 @@ static void nf_conntrack_cleanup_init_net(void) #endif } -static void nf_conntrack_cleanup_net(struct net *net) +/* + * Mishearing the voices in his head, our hero wonders how he's + * supposed to kill the mall. + */ +void nf_conntrack_cleanup_net(struct net *net) { + /* + * This makes sure all current packets have passed through + * netfilter framework. Roll on, two-stage module + * delete... + */ + synchronize_net(); i_see_dead_people: nf_ct_iterate_cleanup(net, kill_all, NULL); nf_ct_release_dying_list(net); @@ -1355,6 +1371,7 @@ static void nf_conntrack_cleanup_net(struct net *net) } nf_ct_free_hashtable(net->ct.hash, net->ct.htable_size); + nf_conntrack_proto_fini(net); nf_conntrack_labels_fini(net); nf_conntrack_helper_fini(net); nf_conntrack_timeout_fini(net); @@ -1367,27 +1384,6 @@ static void nf_conntrack_cleanup_net(struct net *net) free_percpu(net->ct.stat); } -/* Mishearing the voices in his head, our hero wonders how he's - supposed to kill the mall. */ -void nf_conntrack_cleanup(struct net *net) -{ - if (net_eq(net, &init_net)) - RCU_INIT_POINTER(ip_ct_attach, NULL); - - /* This makes sure all current packets have passed through - netfilter framework. Roll on, two-stage module - delete... */ - synchronize_net(); - nf_conntrack_proto_fini(net); - nf_conntrack_cleanup_net(net); -} - -void nf_conntrack_cleanup_end(void) -{ - RCU_INIT_POINTER(nf_ct_destroy, NULL); - nf_conntrack_cleanup_init_net(); -} - void *nf_ct_alloc_hashtable(unsigned int *sizep, int nulls) { struct hlist_nulls_head *hash; @@ -1478,7 +1474,7 @@ void nf_ct_untracked_status_or(unsigned long bits) } EXPORT_SYMBOL_GPL(nf_ct_untracked_status_or); -static int nf_conntrack_init_init_net(void) +int nf_conntrack_init_start(void) { int max_factor = 8; int ret, cpu; @@ -1526,6 +1522,16 @@ err_extend: return ret; } +void nf_conntrack_init_end(void) +{ + /* For use by REJECT target */ + RCU_INIT_POINTER(ip_ct_attach, nf_conntrack_attach); + RCU_INIT_POINTER(nf_ct_destroy, destroy_conntrack); + + /* Howto get NAT offsets */ + RCU_INIT_POINTER(nf_ct_nat_offset, NULL); +} + /* * We need to use special "null" values, not used in hash table */ @@ -1533,7 +1539,7 @@ err_extend: #define DYING_NULLS_VAL ((1<<30)+1) #define TEMPLATE_NULLS_VAL ((1<<30)+2) -static int nf_conntrack_init_net(struct net *net) +int nf_conntrack_init_net(struct net *net) { int ret; @@ -1592,8 +1598,13 @@ static int nf_conntrack_init_net(struct net *net) if (ret < 0) goto err_labels; + ret = nf_conntrack_proto_init(net); + if (ret < 0) + goto err_proto; return 0; +err_proto: + nf_conntrack_labels_fini(net); err_labels: nf_conntrack_helper_fini(net); err_helper: @@ -1622,38 +1633,3 @@ s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, enum ip_conntrack_dir dir, u32 seq); EXPORT_SYMBOL_GPL(nf_ct_nat_offset); - -int nf_conntrack_init(struct net *net) -{ - int ret; - - if (net_eq(net, &init_net)) { - ret = nf_conntrack_init_init_net(); - if (ret < 0) - goto out_init_net; - } - ret = nf_conntrack_proto_init(net); - if (ret < 0) - goto out_proto; - ret = nf_conntrack_init_net(net); - if (ret < 0) - goto out_net; - - if (net_eq(net, &init_net)) { - /* For use by REJECT target */ - RCU_INIT_POINTER(ip_ct_attach, nf_conntrack_attach); - RCU_INIT_POINTER(nf_ct_destroy, destroy_conntrack); - - /* Howto get NAT offsets */ - RCU_INIT_POINTER(nf_ct_nat_offset, NULL); - } - return 0; - -out_net: - nf_conntrack_proto_fini(net); -out_proto: - if (net_eq(net, &init_net)) - nf_conntrack_cleanup_init_net(); -out_init_net: - return ret; -} diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index e7185c6..725bf04 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -472,13 +472,6 @@ static int nf_conntrack_standalone_init_sysctl(struct net *net) { struct ctl_table *table; - if (net_eq(net, &init_net)) { - nf_ct_netfilter_header = - register_net_sysctl(&init_net, "net", nf_ct_netfilter_table); - if (!nf_ct_netfilter_header) - goto out; - } - table = kmemdup(nf_ct_sysctl_table, sizeof(nf_ct_sysctl_table), GFP_KERNEL); if (!table) @@ -502,10 +495,6 @@ static int nf_conntrack_standalone_init_sysctl(struct net *net) out_unregister_netfilter: kfree(table); out_kmemdup: - if (net_eq(net, &init_net)) - unregister_net_sysctl_table(nf_ct_netfilter_header); -out: - printk(KERN_ERR "nf_conntrack: can't register to sysctl.\n"); return -ENOMEM; } @@ -513,8 +502,6 @@ static void nf_conntrack_standalone_fini_sysctl(struct net *net) { struct ctl_table *table; - if (net_eq(net, &init_net)) - unregister_net_sysctl_table(nf_ct_netfilter_header); table = net->ct.sysctl_header->ctl_table_arg; unregister_net_sysctl_table(net->ct.sysctl_header); kfree(table); @@ -530,51 +517,78 @@ static void nf_conntrack_standalone_fini_sysctl(struct net *net) } #endif /* CONFIG_SYSCTL */ -static int nf_conntrack_net_init(struct net *net) +static int nf_conntrack_pernet_init(struct net *net) { int ret; - ret = nf_conntrack_init(net); + ret = nf_conntrack_init_net(net); if (ret < 0) goto out_init; + ret = nf_conntrack_standalone_init_proc(net); if (ret < 0) goto out_proc; + net->ct.sysctl_checksum = 1; net->ct.sysctl_log_invalid = 0; ret = nf_conntrack_standalone_init_sysctl(net); if (ret < 0) goto out_sysctl; + return 0; out_sysctl: nf_conntrack_standalone_fini_proc(net); out_proc: - nf_conntrack_cleanup(net); + nf_conntrack_cleanup_net(net); out_init: return ret; } -static void nf_conntrack_net_exit(struct net *net) +static void nf_conntrack_pernet_exit(struct net *net) { nf_conntrack_standalone_fini_sysctl(net); nf_conntrack_standalone_fini_proc(net); - nf_conntrack_cleanup(net); + nf_conntrack_cleanup_net(net); } static struct pernet_operations nf_conntrack_net_ops = { - .init = nf_conntrack_net_init, - .exit = nf_conntrack_net_exit, + .init = nf_conntrack_pernet_init, + .exit = nf_conntrack_pernet_exit, }; static int __init nf_conntrack_standalone_init(void) { - return register_pernet_subsys(&nf_conntrack_net_ops); + int ret = nf_conntrack_init_start(); + if (ret < 0) + goto out_start; + + nf_ct_netfilter_header = + register_net_sysctl(&init_net, "net", nf_ct_netfilter_table); + if (!nf_ct_netfilter_header) + goto out_sysctl; + + ret = register_pernet_subsys(&nf_conntrack_net_ops); + if (ret < 0) + goto out_pernet; + + nf_conntrack_init_end(); + return 0; + +out_pernet: + unregister_net_sysctl_table(nf_ct_netfilter_header); +out_sysctl: + pr_err("nf_conntrack: can't register to sysctl.\n"); + nf_conntrack_cleanup_end(); +out_start: + return ret; } static void __exit nf_conntrack_standalone_fini(void) { + nf_conntrack_cleanup_start(); unregister_pernet_subsys(&nf_conntrack_net_ops); + unregister_net_sysctl_table(nf_ct_netfilter_header); nf_conntrack_cleanup_end(); } -- cgit v0.10.2 From 83b4dbe19844b5472a8f44b6cf1d88693c080ef7 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:25 +0000 Subject: netfilter: nf_ct_expect: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_expect.h b/include/net/netfilter/nf_conntrack_expect.h index cc13f37..cbbae76 100644 --- a/include/net/netfilter/nf_conntrack_expect.h +++ b/include/net/netfilter/nf_conntrack_expect.h @@ -69,8 +69,11 @@ struct nf_conntrack_expect_policy { #define NF_CT_EXPECT_CLASS_DEFAULT 0 -int nf_conntrack_expect_init(struct net *net); -void nf_conntrack_expect_fini(struct net *net); +int nf_conntrack_expect_pernet_init(struct net *net); +void nf_conntrack_expect_pernet_fini(struct net *net); + +int nf_conntrack_expect_init(void); +void nf_conntrack_expect_fini(void); struct nf_conntrack_expect * __nf_ct_expect_find(struct net *net, u16 zone, diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index fb3e514..a3cca57 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_expect_fini(); } /* @@ -1378,7 +1379,7 @@ void nf_conntrack_cleanup_net(struct net *net) nf_conntrack_ecache_fini(net); nf_conntrack_tstamp_fini(net); nf_conntrack_acct_fini(net); - nf_conntrack_expect_fini(net); + nf_conntrack_expect_pernet_fini(net); kmem_cache_destroy(net->ct.nf_conntrack_cachep); kfree(net->ct.slabname); free_percpu(net->ct.stat); @@ -1501,6 +1502,11 @@ int nf_conntrack_init_start(void) printk(KERN_INFO "nf_conntrack version %s (%u buckets, %d max)\n", NF_CONNTRACK_VERSION, nf_conntrack_htable_size, nf_conntrack_max); + + ret = nf_conntrack_expect_init(); + if (ret < 0) + goto err_expect; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1518,7 +1524,9 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: + nf_conntrack_expect_fini(); #endif +err_expect: return ret; } @@ -1575,7 +1583,7 @@ int nf_conntrack_init_net(struct net *net) printk(KERN_ERR "Unable to create nf_conntrack_hash\n"); goto err_hash; } - ret = nf_conntrack_expect_init(net); + ret = nf_conntrack_expect_pernet_init(net); if (ret < 0) goto err_expect; ret = nf_conntrack_acct_init(net); @@ -1616,7 +1624,7 @@ err_ecache: err_tstamp: nf_conntrack_acct_fini(net); err_acct: - nf_conntrack_expect_fini(net); + nf_conntrack_expect_pernet_fini(net); err_expect: nf_ct_free_hashtable(net->ct.hash, net->ct.htable_size); err_hash: diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 527651a..bdd3418 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -587,53 +587,50 @@ static void exp_proc_remove(struct net *net) module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0400); -int nf_conntrack_expect_init(struct net *net) +int nf_conntrack_expect_pernet_init(struct net *net) { int err = -ENOMEM; - if (net_eq(net, &init_net)) { - if (!nf_ct_expect_hsize) { - nf_ct_expect_hsize = net->ct.htable_size / 256; - if (!nf_ct_expect_hsize) - nf_ct_expect_hsize = 1; - } - nf_ct_expect_max = nf_ct_expect_hsize * 4; - } - net->ct.expect_count = 0; net->ct.expect_hash = nf_ct_alloc_hashtable(&nf_ct_expect_hsize, 0); if (net->ct.expect_hash == NULL) goto err1; - if (net_eq(net, &init_net)) { - nf_ct_expect_cachep = kmem_cache_create("nf_conntrack_expect", - sizeof(struct nf_conntrack_expect), - 0, 0, NULL); - if (!nf_ct_expect_cachep) - goto err2; - } - err = exp_proc_init(net); if (err < 0) - goto err3; + goto err2; return 0; - -err3: - if (net_eq(net, &init_net)) - kmem_cache_destroy(nf_ct_expect_cachep); err2: nf_ct_free_hashtable(net->ct.expect_hash, nf_ct_expect_hsize); err1: return err; } -void nf_conntrack_expect_fini(struct net *net) +void nf_conntrack_expect_pernet_fini(struct net *net) { exp_proc_remove(net); - if (net_eq(net, &init_net)) { - rcu_barrier(); /* Wait for call_rcu() before destroy */ - kmem_cache_destroy(nf_ct_expect_cachep); - } nf_ct_free_hashtable(net->ct.expect_hash, nf_ct_expect_hsize); } + +int nf_conntrack_expect_init(void) +{ + if (!nf_ct_expect_hsize) { + nf_ct_expect_hsize = nf_conntrack_htable_size / 256; + if (!nf_ct_expect_hsize) + nf_ct_expect_hsize = 1; + } + nf_ct_expect_max = nf_ct_expect_hsize * 4; + nf_ct_expect_cachep = kmem_cache_create("nf_conntrack_expect", + sizeof(struct nf_conntrack_expect), + 0, 0, NULL); + if (!nf_ct_expect_cachep) + return -ENOMEM; + return 0; +} + +void nf_conntrack_expect_fini(void) +{ + rcu_barrier(); /* Wait for call_rcu() before destroy */ + kmem_cache_destroy(nf_ct_expect_cachep); +} -- cgit v0.10.2 From b7ff3a1fae78783e0ab1ef82f5978aeb89ddd16b Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:26 +0000 Subject: netfilter: nf_ct_acct: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_acct.h b/include/net/netfilter/nf_conntrack_acct.h index 463ae8e..2bdb7a1 100644 --- a/include/net/netfilter/nf_conntrack_acct.h +++ b/include/net/netfilter/nf_conntrack_acct.h @@ -57,7 +57,9 @@ static inline void nf_ct_set_acct(struct net *net, bool enable) net->ct.sysctl_acct = enable; } -extern int nf_conntrack_acct_init(struct net *net); -extern void nf_conntrack_acct_fini(struct net *net); +extern int nf_conntrack_acct_pernet_init(struct net *net); +extern void nf_conntrack_acct_pernet_fini(struct net *net); +extern int nf_conntrack_acct_init(void); +extern void nf_conntrack_acct_fini(void); #endif /* _NF_CONNTRACK_ACCT_H */ diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c index 7df424e..2d3030a 100644 --- a/net/netfilter/nf_conntrack_acct.c +++ b/net/netfilter/nf_conntrack_acct.c @@ -106,36 +106,26 @@ static void nf_conntrack_acct_fini_sysctl(struct net *net) } #endif -int nf_conntrack_acct_init(struct net *net) +int nf_conntrack_acct_pernet_init(struct net *net) { - int ret; - net->ct.sysctl_acct = nf_ct_acct; + return nf_conntrack_acct_init_sysctl(net); +} - if (net_eq(net, &init_net)) { - ret = nf_ct_extend_register(&acct_extend); - if (ret < 0) { - printk(KERN_ERR "nf_conntrack_acct: Unable to register extension\n"); - goto out_extend_register; - } - } +void nf_conntrack_acct_pernet_fini(struct net *net) +{ + nf_conntrack_acct_fini_sysctl(net); +} - ret = nf_conntrack_acct_init_sysctl(net); +int nf_conntrack_acct_init(void) +{ + int ret = nf_ct_extend_register(&acct_extend); if (ret < 0) - goto out_sysctl; - - return 0; - -out_sysctl: - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&acct_extend); -out_extend_register: + pr_err("nf_conntrack_acct: Unable to register extension\n"); return ret; } -void nf_conntrack_acct_fini(struct net *net) +void nf_conntrack_acct_fini(void) { - nf_conntrack_acct_fini_sysctl(net); - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&acct_extend); + nf_ct_extend_unregister(&acct_extend); } diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index a3cca57..f4c6d4a 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_acct_fini(); nf_conntrack_expect_fini(); } @@ -1378,7 +1379,7 @@ void nf_conntrack_cleanup_net(struct net *net) nf_conntrack_timeout_fini(net); nf_conntrack_ecache_fini(net); nf_conntrack_tstamp_fini(net); - nf_conntrack_acct_fini(net); + nf_conntrack_acct_pernet_fini(net); nf_conntrack_expect_pernet_fini(net); kmem_cache_destroy(net->ct.nf_conntrack_cachep); kfree(net->ct.slabname); @@ -1507,6 +1508,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_expect; + ret = nf_conntrack_acct_init(); + if (ret < 0) + goto err_acct; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1524,8 +1529,10 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: - nf_conntrack_expect_fini(); + nf_conntrack_acct_fini(); #endif +err_acct: + nf_conntrack_expect_fini(); err_expect: return ret; } @@ -1586,7 +1593,7 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_expect_pernet_init(net); if (ret < 0) goto err_expect; - ret = nf_conntrack_acct_init(net); + ret = nf_conntrack_acct_pernet_init(net); if (ret < 0) goto err_acct; ret = nf_conntrack_tstamp_init(net); @@ -1622,7 +1629,7 @@ err_timeout: err_ecache: nf_conntrack_tstamp_fini(net); err_tstamp: - nf_conntrack_acct_fini(net); + nf_conntrack_acct_pernet_fini(net); err_acct: nf_conntrack_expect_pernet_fini(net); err_expect: -- cgit v0.10.2 From 73f4001a52c986114f540504d70b21e52eb0d92a Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:27 +0000 Subject: netfilter: nf_ct_tstamp: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_timestamp.h b/include/net/netfilter/nf_conntrack_timestamp.h index fc9c82b..b004614 100644 --- a/include/net/netfilter/nf_conntrack_timestamp.h +++ b/include/net/netfilter/nf_conntrack_timestamp.h @@ -48,15 +48,28 @@ static inline void nf_ct_set_tstamp(struct net *net, bool enable) } #ifdef CONFIG_NF_CONNTRACK_TIMESTAMP -extern int nf_conntrack_tstamp_init(struct net *net); -extern void nf_conntrack_tstamp_fini(struct net *net); +extern int nf_conntrack_tstamp_pernet_init(struct net *net); +extern void nf_conntrack_tstamp_pernet_fini(struct net *net); + +extern int nf_conntrack_tstamp_init(void); +extern void nf_conntrack_tstamp_fini(void); #else -static inline int nf_conntrack_tstamp_init(struct net *net) +static inline int nf_conntrack_tstamp_pernet_init(struct net *net) +{ + return 0; +} + +static inline void nf_conntrack_tstamp_pernet_fini(struct net *net) +{ + return; +} + +static inline int nf_conntrack_tstamp_init(void) { return 0; } -static inline void nf_conntrack_tstamp_fini(struct net *net) +static inline void nf_conntrack_tstamp_fini(void) { return; } diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index f4c6d4a..20ebfff 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_tstamp_fini(); nf_conntrack_acct_fini(); nf_conntrack_expect_fini(); } @@ -1378,7 +1379,7 @@ void nf_conntrack_cleanup_net(struct net *net) nf_conntrack_helper_fini(net); nf_conntrack_timeout_fini(net); nf_conntrack_ecache_fini(net); - nf_conntrack_tstamp_fini(net); + nf_conntrack_tstamp_pernet_fini(net); nf_conntrack_acct_pernet_fini(net); nf_conntrack_expect_pernet_fini(net); kmem_cache_destroy(net->ct.nf_conntrack_cachep); @@ -1512,6 +1513,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_acct; + ret = nf_conntrack_tstamp_init(); + if (ret < 0) + goto err_tstamp; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1529,8 +1534,10 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: - nf_conntrack_acct_fini(); + nf_conntrack_tstamp_fini(); #endif +err_tstamp: + nf_conntrack_acct_fini(); err_acct: nf_conntrack_expect_fini(); err_expect: @@ -1596,7 +1603,7 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_acct_pernet_init(net); if (ret < 0) goto err_acct; - ret = nf_conntrack_tstamp_init(net); + ret = nf_conntrack_tstamp_pernet_init(net); if (ret < 0) goto err_tstamp; ret = nf_conntrack_ecache_init(net); @@ -1627,7 +1634,7 @@ err_helper: err_timeout: nf_conntrack_ecache_fini(net); err_ecache: - nf_conntrack_tstamp_fini(net); + nf_conntrack_tstamp_pernet_fini(net); err_tstamp: nf_conntrack_acct_pernet_fini(net); err_acct: diff --git a/net/netfilter/nf_conntrack_timestamp.c b/net/netfilter/nf_conntrack_timestamp.c index 7ea8026..902fb0a 100644 --- a/net/netfilter/nf_conntrack_timestamp.c +++ b/net/netfilter/nf_conntrack_timestamp.c @@ -88,37 +88,28 @@ static void nf_conntrack_tstamp_fini_sysctl(struct net *net) } #endif -int nf_conntrack_tstamp_init(struct net *net) +int nf_conntrack_tstamp_pernet_init(struct net *net) { - int ret; - net->ct.sysctl_tstamp = nf_ct_tstamp; + return nf_conntrack_tstamp_init_sysctl(net); +} - if (net_eq(net, &init_net)) { - ret = nf_ct_extend_register(&tstamp_extend); - if (ret < 0) { - printk(KERN_ERR "nf_ct_tstamp: Unable to register " - "extension\n"); - goto out_extend_register; - } - } +void nf_conntrack_tstamp_pernet_fini(struct net *net) +{ + nf_conntrack_tstamp_fini_sysctl(net); + nf_ct_extend_unregister(&tstamp_extend); +} - ret = nf_conntrack_tstamp_init_sysctl(net); +int nf_conntrack_tstamp_init(void) +{ + int ret; + ret = nf_ct_extend_register(&tstamp_extend); if (ret < 0) - goto out_sysctl; - - return 0; - -out_sysctl: - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&tstamp_extend); -out_extend_register: + pr_err("nf_ct_tstamp: Unable to register extension\n"); return ret; } -void nf_conntrack_tstamp_fini(struct net *net) +void nf_conntrack_tstamp_fini(void) { - nf_conntrack_tstamp_fini_sysctl(net); - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&tstamp_extend); + nf_ct_extend_unregister(&tstamp_extend); } -- cgit v0.10.2 From 3fe0f943d4f52f875f0fdf8dbe472c8a9b852891 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:28 +0000 Subject: netfilter: nf_ct_ecache: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 5654d29..092dc65 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -207,9 +207,11 @@ nf_ct_expect_event(enum ip_conntrack_expect_events event, nf_ct_expect_event_report(event, exp, 0, 0); } -extern int nf_conntrack_ecache_init(struct net *net); -extern void nf_conntrack_ecache_fini(struct net *net); +extern int nf_conntrack_ecache_pernet_init(struct net *net); +extern void nf_conntrack_ecache_pernet_fini(struct net *net); +extern int nf_conntrack_ecache_init(void); +extern void nf_conntrack_ecache_fini(void); #else /* CONFIG_NF_CONNTRACK_EVENTS */ static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, @@ -232,12 +234,21 @@ static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events e, u32 portid, int report) {} -static inline int nf_conntrack_ecache_init(struct net *net) +static inline int nf_conntrack_ecache_pernet_init(struct net *net) { return 0; } -static inline void nf_conntrack_ecache_fini(struct net *net) +static inline void nf_conntrack_ecache_pernet_fini(struct net *net) +{ +} + +static inline int nf_conntrack_ecache_init(void) +{ + return 0; +} + +static inline void nf_conntrack_ecache_fini(void) { } #endif /* CONFIG_NF_CONNTRACK_EVENTS */ diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 20ebfff..048fe77 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_ecache_fini(); nf_conntrack_tstamp_fini(); nf_conntrack_acct_fini(); nf_conntrack_expect_fini(); @@ -1378,7 +1379,7 @@ void nf_conntrack_cleanup_net(struct net *net) nf_conntrack_labels_fini(net); nf_conntrack_helper_fini(net); nf_conntrack_timeout_fini(net); - nf_conntrack_ecache_fini(net); + nf_conntrack_ecache_pernet_fini(net); nf_conntrack_tstamp_pernet_fini(net); nf_conntrack_acct_pernet_fini(net); nf_conntrack_expect_pernet_fini(net); @@ -1517,6 +1518,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_tstamp; + ret = nf_conntrack_ecache_init(); + if (ret < 0) + goto err_ecache; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1534,8 +1539,10 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: - nf_conntrack_tstamp_fini(); + nf_conntrack_ecache_fini(); #endif +err_ecache: + nf_conntrack_tstamp_fini(); err_tstamp: nf_conntrack_acct_fini(); err_acct: @@ -1606,7 +1613,7 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_tstamp_pernet_init(net); if (ret < 0) goto err_tstamp; - ret = nf_conntrack_ecache_init(net); + ret = nf_conntrack_ecache_pernet_init(net); if (ret < 0) goto err_ecache; ret = nf_conntrack_timeout_init(net); @@ -1632,7 +1639,7 @@ err_labels: err_helper: nf_conntrack_timeout_fini(net); err_timeout: - nf_conntrack_ecache_fini(net); + nf_conntrack_ecache_pernet_fini(net); err_ecache: nf_conntrack_tstamp_pernet_fini(net); err_tstamp: diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c index faa978f..b5d2eb8 100644 --- a/net/netfilter/nf_conntrack_ecache.c +++ b/net/netfilter/nf_conntrack_ecache.c @@ -233,38 +233,27 @@ static void nf_conntrack_event_fini_sysctl(struct net *net) } #endif /* CONFIG_SYSCTL */ -int nf_conntrack_ecache_init(struct net *net) +int nf_conntrack_ecache_pernet_init(struct net *net) { - int ret; - net->ct.sysctl_events = nf_ct_events; net->ct.sysctl_events_retry_timeout = nf_ct_events_retry_timeout; + return nf_conntrack_event_init_sysctl(net); +} - if (net_eq(net, &init_net)) { - ret = nf_ct_extend_register(&event_extend); - if (ret < 0) { - printk(KERN_ERR "nf_ct_event: Unable to register " - "event extension.\n"); - goto out_extend_register; - } - } +void nf_conntrack_ecache_pernet_fini(struct net *net) +{ + nf_conntrack_event_fini_sysctl(net); +} - ret = nf_conntrack_event_init_sysctl(net); +int nf_conntrack_ecache_init(void) +{ + int ret = nf_ct_extend_register(&event_extend); if (ret < 0) - goto out_sysctl; - - return 0; - -out_sysctl: - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&event_extend); -out_extend_register: + pr_err("nf_ct_event: Unable to register event extension.\n"); return ret; } -void nf_conntrack_ecache_fini(struct net *net) +void nf_conntrack_ecache_fini(void) { - nf_conntrack_event_fini_sysctl(net); - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&event_extend); + nf_ct_extend_unregister(&event_extend); } -- cgit v0.10.2 From 8684094cf17d8ce96e0a8c63003f331aa017e22d Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:29 +0000 Subject: netfilter: nf_ct_timeout: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_timeout.h b/include/net/netfilter/nf_conntrack_timeout.h index e41e472..d23aceb 100644 --- a/include/net/netfilter/nf_conntrack_timeout.h +++ b/include/net/netfilter/nf_conntrack_timeout.h @@ -76,15 +76,15 @@ nf_ct_timeout_lookup(struct net *net, struct nf_conn *ct, } #ifdef CONFIG_NF_CONNTRACK_TIMEOUT -extern int nf_conntrack_timeout_init(struct net *net); -extern void nf_conntrack_timeout_fini(struct net *net); +extern int nf_conntrack_timeout_init(void); +extern void nf_conntrack_timeout_fini(void); #else -static inline int nf_conntrack_timeout_init(struct net *net) +static inline int nf_conntrack_timeout_init(void) { return 0; } -static inline void nf_conntrack_timeout_fini(struct net *net) +static inline void nf_conntrack_timeout_fini(void) { return; } diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 048fe77..4f4d107 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_timeout_fini(); nf_conntrack_ecache_fini(); nf_conntrack_tstamp_fini(); nf_conntrack_acct_fini(); @@ -1378,7 +1379,6 @@ void nf_conntrack_cleanup_net(struct net *net) nf_conntrack_proto_fini(net); nf_conntrack_labels_fini(net); nf_conntrack_helper_fini(net); - nf_conntrack_timeout_fini(net); nf_conntrack_ecache_pernet_fini(net); nf_conntrack_tstamp_pernet_fini(net); nf_conntrack_acct_pernet_fini(net); @@ -1522,6 +1522,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_ecache; + ret = nf_conntrack_timeout_init(); + if (ret < 0) + goto err_timeout; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1539,8 +1543,10 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: - nf_conntrack_ecache_fini(); + nf_conntrack_timeout_fini(); #endif +err_timeout: + nf_conntrack_ecache_fini(); err_ecache: nf_conntrack_tstamp_fini(); err_tstamp: @@ -1616,9 +1622,6 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_ecache_pernet_init(net); if (ret < 0) goto err_ecache; - ret = nf_conntrack_timeout_init(net); - if (ret < 0) - goto err_timeout; ret = nf_conntrack_helper_init(net); if (ret < 0) goto err_helper; @@ -1637,8 +1640,6 @@ err_proto: err_labels: nf_conntrack_helper_fini(net); err_helper: - nf_conntrack_timeout_fini(net); -err_timeout: nf_conntrack_ecache_pernet_fini(net); err_ecache: nf_conntrack_tstamp_pernet_fini(net); diff --git a/net/netfilter/nf_conntrack_timeout.c b/net/netfilter/nf_conntrack_timeout.c index a878ce5..93da609 100644 --- a/net/netfilter/nf_conntrack_timeout.c +++ b/net/netfilter/nf_conntrack_timeout.c @@ -37,24 +37,15 @@ static struct nf_ct_ext_type timeout_extend __read_mostly = { .id = NF_CT_EXT_TIMEOUT, }; -int nf_conntrack_timeout_init(struct net *net) +int nf_conntrack_timeout_init(void) { - int ret = 0; - - if (net_eq(net, &init_net)) { - ret = nf_ct_extend_register(&timeout_extend); - if (ret < 0) { - printk(KERN_ERR "nf_ct_timeout: Unable to register " - "timeout extension.\n"); - return ret; - } - } - - return 0; + int ret = nf_ct_extend_register(&timeout_extend); + if (ret < 0) + pr_err("nf_ct_timeout: Unable to register timeout extension.\n"); + return ret; } -void nf_conntrack_timeout_fini(struct net *net) +void nf_conntrack_timeout_fini(void) { - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&timeout_extend); + nf_ct_extend_unregister(&timeout_extend); } -- cgit v0.10.2 From 5e615b220087c5551f486c967831cecdfd338dbe Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:30 +0000 Subject: netfilter: nf_ct_helper: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h index 9aad956..ce27edf 100644 --- a/include/net/netfilter/nf_conntrack_helper.h +++ b/include/net/netfilter/nf_conntrack_helper.h @@ -82,8 +82,11 @@ static inline void *nfct_help_data(const struct nf_conn *ct) return (void *)help->data; } -extern int nf_conntrack_helper_init(struct net *net); -extern void nf_conntrack_helper_fini(struct net *net); +extern int nf_conntrack_helper_pernet_init(struct net *net); +extern void nf_conntrack_helper_pernet_fini(struct net *net); + +extern int nf_conntrack_helper_init(void); +extern void nf_conntrack_helper_fini(void); extern int nf_conntrack_broadcast_help(struct sk_buff *skb, unsigned int protoff, diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 4f4d107..06b8cdb 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_helper_fini(); nf_conntrack_timeout_fini(); nf_conntrack_ecache_fini(); nf_conntrack_tstamp_fini(); @@ -1378,7 +1379,7 @@ void nf_conntrack_cleanup_net(struct net *net) nf_ct_free_hashtable(net->ct.hash, net->ct.htable_size); nf_conntrack_proto_fini(net); nf_conntrack_labels_fini(net); - nf_conntrack_helper_fini(net); + nf_conntrack_helper_pernet_fini(net); nf_conntrack_ecache_pernet_fini(net); nf_conntrack_tstamp_pernet_fini(net); nf_conntrack_acct_pernet_fini(net); @@ -1526,6 +1527,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_timeout; + ret = nf_conntrack_helper_init(); + if (ret < 0) + goto err_helper; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1543,8 +1548,10 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: - nf_conntrack_timeout_fini(); + nf_conntrack_helper_fini(); #endif +err_helper: + nf_conntrack_timeout_fini(); err_timeout: nf_conntrack_ecache_fini(); err_ecache: @@ -1622,7 +1629,7 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_ecache_pernet_init(net); if (ret < 0) goto err_ecache; - ret = nf_conntrack_helper_init(net); + ret = nf_conntrack_helper_pernet_init(net); if (ret < 0) goto err_helper; @@ -1638,7 +1645,7 @@ int nf_conntrack_init_net(struct net *net) err_proto: nf_conntrack_labels_fini(net); err_labels: - nf_conntrack_helper_fini(net); + nf_conntrack_helper_pernet_fini(net); err_helper: nf_conntrack_ecache_pernet_fini(net); err_ecache: diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 884f2b3..2f380f7 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -423,44 +423,41 @@ static struct nf_ct_ext_type helper_extend __read_mostly = { .id = NF_CT_EXT_HELPER, }; -int nf_conntrack_helper_init(struct net *net) +int nf_conntrack_helper_pernet_init(struct net *net) { - int err; - net->ct.auto_assign_helper_warned = false; net->ct.sysctl_auto_assign_helper = nf_ct_auto_assign_helper; + return nf_conntrack_helper_init_sysctl(net); +} - if (net_eq(net, &init_net)) { - nf_ct_helper_hsize = 1; /* gets rounded up to use one page */ - nf_ct_helper_hash = - nf_ct_alloc_hashtable(&nf_ct_helper_hsize, 0); - if (!nf_ct_helper_hash) - return -ENOMEM; +void nf_conntrack_helper_pernet_fini(struct net *net) +{ + nf_conntrack_helper_fini_sysctl(net); +} - err = nf_ct_extend_register(&helper_extend); - if (err < 0) - goto err1; +int nf_conntrack_helper_init(void) +{ + int ret; + nf_ct_helper_hsize = 1; /* gets rounded up to use one page */ + nf_ct_helper_hash = + nf_ct_alloc_hashtable(&nf_ct_helper_hsize, 0); + if (!nf_ct_helper_hash) + return -ENOMEM; + + ret = nf_ct_extend_register(&helper_extend); + if (ret < 0) { + pr_err("nf_ct_helper: Unable to register helper extension.\n"); + goto out_extend; } - err = nf_conntrack_helper_init_sysctl(net); - if (err < 0) - goto out_sysctl; - return 0; - -out_sysctl: - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&helper_extend); -err1: +out_extend: nf_ct_free_hashtable(nf_ct_helper_hash, nf_ct_helper_hsize); - return err; + return ret; } -void nf_conntrack_helper_fini(struct net *net) +void nf_conntrack_helper_fini(void) { - nf_conntrack_helper_fini_sysctl(net); - if (net_eq(net, &init_net)) { - nf_ct_extend_unregister(&helper_extend); - nf_ct_free_hashtable(nf_ct_helper_hash, nf_ct_helper_hsize); - } + nf_ct_extend_unregister(&helper_extend); + nf_ct_free_hashtable(nf_ct_helper_hash, nf_ct_helper_hsize); } -- cgit v0.10.2 From 5f69b8f5218dc303cbcb6f71d221c27d3cd17ebb Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:31 +0000 Subject: netfilter: nf_ct_labels: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_labels.h b/include/net/netfilter/nf_conntrack_labels.h index a3ce5d0..c985695 100644 --- a/include/net/netfilter/nf_conntrack_labels.h +++ b/include/net/netfilter/nf_conntrack_labels.h @@ -50,9 +50,9 @@ int nf_connlabels_replace(struct nf_conn *ct, const u32 *data, const u32 *mask, unsigned int words); #ifdef CONFIG_NF_CONNTRACK_LABELS -int nf_conntrack_labels_init(struct net *net); -void nf_conntrack_labels_fini(struct net *net); +int nf_conntrack_labels_init(void); +void nf_conntrack_labels_fini(void); #else -static inline int nf_conntrack_labels_init(struct net *n) { return 0; } -static inline void nf_conntrack_labels_fini(struct net *net) {} +static inline int nf_conntrack_labels_init(void) { return 0; } +static inline void nf_conntrack_labels_fini(void) {} #endif diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 06b8cdb..a4a3bcf 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_labels_fini(); nf_conntrack_helper_fini(); nf_conntrack_timeout_fini(); nf_conntrack_ecache_fini(); @@ -1378,7 +1379,6 @@ void nf_conntrack_cleanup_net(struct net *net) nf_ct_free_hashtable(net->ct.hash, net->ct.htable_size); nf_conntrack_proto_fini(net); - nf_conntrack_labels_fini(net); nf_conntrack_helper_pernet_fini(net); nf_conntrack_ecache_pernet_fini(net); nf_conntrack_tstamp_pernet_fini(net); @@ -1531,6 +1531,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_helper; + ret = nf_conntrack_labels_init(); + if (ret < 0) + goto err_labels; + #ifdef CONFIG_NF_CONNTRACK_ZONES ret = nf_ct_extend_register(&nf_ct_zone_extend); if (ret < 0) @@ -1548,8 +1552,10 @@ int nf_conntrack_init_start(void) #ifdef CONFIG_NF_CONNTRACK_ZONES err_extend: - nf_conntrack_helper_fini(); + nf_conntrack_labels_fini(); #endif +err_labels: + nf_conntrack_helper_fini(); err_helper: nf_conntrack_timeout_fini(); err_timeout: @@ -1632,19 +1638,12 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_helper_pernet_init(net); if (ret < 0) goto err_helper; - - ret = nf_conntrack_labels_init(net); - if (ret < 0) - goto err_labels; - ret = nf_conntrack_proto_init(net); if (ret < 0) goto err_proto; return 0; err_proto: - nf_conntrack_labels_fini(net); -err_labels: nf_conntrack_helper_pernet_fini(net); err_helper: nf_conntrack_ecache_pernet_fini(net); diff --git a/net/netfilter/nf_conntrack_labels.c b/net/netfilter/nf_conntrack_labels.c index e1d1eb8..8fe2e99 100644 --- a/net/netfilter/nf_conntrack_labels.c +++ b/net/netfilter/nf_conntrack_labels.c @@ -101,15 +101,12 @@ static struct nf_ct_ext_type labels_extend __read_mostly = { .id = NF_CT_EXT_LABELS, }; -int nf_conntrack_labels_init(struct net *net) +int nf_conntrack_labels_init(void) { - if (net_eq(net, &init_net)) - return nf_ct_extend_register(&labels_extend); - return 0; + return nf_ct_extend_register(&labels_extend); } -void nf_conntrack_labels_fini(struct net *net) +void nf_conntrack_labels_fini(void) { - if (net_eq(net, &init_net)) - nf_ct_extend_unregister(&labels_extend); + nf_ct_extend_unregister(&labels_extend); } -- cgit v0.10.2 From 04d870017908f40bbb1c51910acc030ae4979db4 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:32 +0000 Subject: netfilter: nf_ct_proto: move initialization out of pernet_operations Move the global initial codes to the module_init/exit context. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h index e05c1f6..930275fa 100644 --- a/include/net/netfilter/nf_conntrack_core.h +++ b/include/net/netfilter/nf_conntrack_core.h @@ -28,8 +28,11 @@ extern unsigned int nf_conntrack_in(struct net *net, extern int nf_conntrack_init_net(struct net *net); extern void nf_conntrack_cleanup_net(struct net *net); -extern int nf_conntrack_proto_init(struct net *net); -extern void nf_conntrack_proto_fini(struct net *net); +extern int nf_conntrack_proto_pernet_init(struct net *net); +extern void nf_conntrack_proto_pernet_fini(struct net *net); + +extern int nf_conntrack_proto_init(void); +extern void nf_conntrack_proto_fini(void); extern int nf_conntrack_init_start(void); extern void nf_conntrack_cleanup_start(void); diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index a4a3bcf..c8e001a 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1348,6 +1348,7 @@ void nf_conntrack_cleanup_end(void) #ifdef CONFIG_NF_CONNTRACK_ZONES nf_ct_extend_unregister(&nf_ct_zone_extend); #endif + nf_conntrack_proto_fini(); nf_conntrack_labels_fini(); nf_conntrack_helper_fini(); nf_conntrack_timeout_fini(); @@ -1378,7 +1379,7 @@ void nf_conntrack_cleanup_net(struct net *net) } nf_ct_free_hashtable(net->ct.hash, net->ct.htable_size); - nf_conntrack_proto_fini(net); + nf_conntrack_proto_pernet_fini(net); nf_conntrack_helper_pernet_fini(net); nf_conntrack_ecache_pernet_fini(net); nf_conntrack_tstamp_pernet_fini(net); @@ -1540,6 +1541,10 @@ int nf_conntrack_init_start(void) if (ret < 0) goto err_extend; #endif + ret = nf_conntrack_proto_init(); + if (ret < 0) + goto err_proto; + /* Set up fake conntrack: to never be deleted, not in any hashes */ for_each_possible_cpu(cpu) { struct nf_conn *ct = &per_cpu(nf_conntrack_untracked, cpu); @@ -1550,10 +1555,12 @@ int nf_conntrack_init_start(void) nf_ct_untracked_status_or(IPS_CONFIRMED | IPS_UNTRACKED); return 0; +err_proto: #ifdef CONFIG_NF_CONNTRACK_ZONES + nf_ct_extend_unregister(&nf_ct_zone_extend); err_extend: - nf_conntrack_labels_fini(); #endif + nf_conntrack_labels_fini(); err_labels: nf_conntrack_helper_fini(); err_helper: @@ -1638,7 +1645,7 @@ int nf_conntrack_init_net(struct net *net) ret = nf_conntrack_helper_pernet_init(net); if (ret < 0) goto err_helper; - ret = nf_conntrack_proto_init(net); + ret = nf_conntrack_proto_pernet_init(net); if (ret < 0) goto err_proto; return 0; diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c index 51e928d..f0ec07c 100644 --- a/net/netfilter/nf_conntrack_proto.c +++ b/net/netfilter/nf_conntrack_proto.c @@ -503,9 +503,8 @@ void nf_conntrack_l4proto_unregister(struct net *net, } EXPORT_SYMBOL_GPL(nf_conntrack_l4proto_unregister); -int nf_conntrack_proto_init(struct net *net) +int nf_conntrack_proto_pernet_init(struct net *net) { - unsigned int i; int err; struct nf_proto_net *pn = nf_ct_l4proto_net(net, &nf_conntrack_l4proto_generic); @@ -520,19 +519,12 @@ int nf_conntrack_proto_init(struct net *net) if (err < 0) return err; - if (net == &init_net) { - for (i = 0; i < AF_MAX; i++) - rcu_assign_pointer(nf_ct_l3protos[i], - &nf_conntrack_l3proto_generic); - } - pn->users++; return 0; } -void nf_conntrack_proto_fini(struct net *net) +void nf_conntrack_proto_pernet_fini(struct net *net) { - unsigned int i; struct nf_proto_net *pn = nf_ct_l4proto_net(net, &nf_conntrack_l4proto_generic); @@ -540,9 +532,21 @@ void nf_conntrack_proto_fini(struct net *net) nf_ct_l4proto_unregister_sysctl(net, pn, &nf_conntrack_l4proto_generic); - if (net == &init_net) { - /* free l3proto protocol tables */ - for (i = 0; i < PF_MAX; i++) - kfree(nf_ct_protos[i]); - } +} + +int nf_conntrack_proto_init(void) +{ + unsigned int i; + for (i = 0; i < AF_MAX; i++) + rcu_assign_pointer(nf_ct_l3protos[i], + &nf_conntrack_l3proto_generic); + return 0; +} + +void nf_conntrack_proto_fini(void) +{ + unsigned int i; + /* free l3proto protocol tables */ + for (i = 0; i < PF_MAX; i++) + kfree(nf_ct_protos[i]); } -- cgit v0.10.2 From 6330750d566d764ce4916d8fe2bcdcad28fc7a42 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 21 Jan 2013 22:10:33 +0000 Subject: netfilter: nf_conntrack: refactor l3proto support for netns Move the code that register/unregister l3proto to the module_init/exit context. Given that we have to modify some interfaces to accomodate these changes, it is a good time to use shorter function names for this using the nf_ct_* prefix instead of nf_conntrack_*, that is: nf_ct_l3proto_register nf_ct_l3proto_pernet_register nf_ct_l3proto_unregister nf_ct_l3proto_pernet_unregister We same many line breaks with it. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h index 6f7c13f..3bb89ea 100644 --- a/include/net/netfilter/nf_conntrack_l3proto.h +++ b/include/net/netfilter/nf_conntrack_l3proto.h @@ -76,11 +76,16 @@ struct nf_conntrack_l3proto { extern struct nf_conntrack_l3proto __rcu *nf_ct_l3protos[AF_MAX]; -/* Protocol registration. */ -extern int nf_conntrack_l3proto_register(struct net *net, +/* Protocol pernet registration. */ +extern int nf_ct_l3proto_pernet_register(struct net *net, struct nf_conntrack_l3proto *proto); -extern void nf_conntrack_l3proto_unregister(struct net *net, +extern void nf_ct_l3proto_pernet_unregister(struct net *net, struct nf_conntrack_l3proto *proto); + +/* Protocol global registration. */ +extern int nf_ct_l3proto_register(struct nf_conntrack_l3proto *proto); +extern void nf_ct_l3proto_unregister(struct nf_conntrack_l3proto *proto); + extern struct nf_conntrack_l3proto *nf_ct_l3proto_find_get(u_int16_t l3proto); extern void nf_ct_l3proto_put(struct nf_conntrack_l3proto *p); diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index fcdd0c2..76b84fc 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -438,10 +438,9 @@ static int ipv4_net_init(struct net *net) pr_err("nf_conntrack_l4proto_icmp4 :protocol register failed\n"); goto out_icmp; } - ret = nf_conntrack_l3proto_register(net, - &nf_conntrack_l3proto_ipv4); + ret = nf_ct_l3proto_pernet_register(net, &nf_conntrack_l3proto_ipv4); if (ret < 0) { - pr_err("nf_conntrack_l3proto_ipv4 :protocol register failed\n"); + pr_err("nf_conntrack_ipv4: pernet registration failed\n"); goto out_ipv4; } return 0; @@ -460,8 +459,7 @@ out_tcp: static void ipv4_net_exit(struct net *net) { - nf_conntrack_l3proto_unregister(net, - &nf_conntrack_l3proto_ipv4); + nf_ct_l3proto_pernet_unregister(net, &nf_conntrack_l3proto_ipv4); nf_conntrack_l4proto_unregister(net, &nf_conntrack_l4proto_icmp); nf_conntrack_l4proto_unregister(net, @@ -500,16 +498,25 @@ static int __init nf_conntrack_l3proto_ipv4_init(void) pr_err("nf_conntrack_ipv4: can't register hooks.\n"); goto cleanup_pernet; } + + ret = nf_ct_l3proto_register(&nf_conntrack_l3proto_ipv4); + if (ret < 0) { + pr_err("nf_conntrack_ipv4: can't register ipv4 proto.\n"); + goto cleanup_hooks; + } + #if defined(CONFIG_PROC_FS) && defined(CONFIG_NF_CONNTRACK_PROC_COMPAT) ret = nf_conntrack_ipv4_compat_init(); if (ret < 0) - goto cleanup_hooks; + goto cleanup_proto; #endif return ret; #if defined(CONFIG_PROC_FS) && defined(CONFIG_NF_CONNTRACK_PROC_COMPAT) + cleanup_proto: + nf_ct_l3proto_unregister(&nf_conntrack_l3proto_ipv4); +#endif cleanup_hooks: nf_unregister_hooks(ipv4_conntrack_ops, ARRAY_SIZE(ipv4_conntrack_ops)); -#endif cleanup_pernet: unregister_pernet_subsys(&ipv4_net_ops); cleanup_sockopt: @@ -523,6 +530,7 @@ static void __exit nf_conntrack_l3proto_ipv4_fini(void) #if defined(CONFIG_PROC_FS) && defined(CONFIG_NF_CONNTRACK_PROC_COMPAT) nf_conntrack_ipv4_compat_fini(); #endif + nf_ct_l3proto_unregister(&nf_conntrack_l3proto_ipv4); nf_unregister_hooks(ipv4_conntrack_ops, ARRAY_SIZE(ipv4_conntrack_ops)); unregister_pernet_subsys(&ipv4_net_ops); nf_unregister_sockopt(&so_getorigdst); diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c index 137e245..3eaf6ba 100644 --- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c +++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c @@ -439,10 +439,9 @@ static int ipv6_net_init(struct net *net) printk(KERN_ERR "nf_conntrack_l4proto_icmp6: protocol register failed\n"); goto cleanup_udp6; } - ret = nf_conntrack_l3proto_register(net, - &nf_conntrack_l3proto_ipv6); + ret = nf_ct_l3proto_pernet_register(net, &nf_conntrack_l3proto_ipv6); if (ret < 0) { - printk(KERN_ERR "nf_conntrack_l3proto_ipv6: protocol register failed\n"); + pr_err("nf_conntrack_ipv6: pernet registration failed.\n"); goto cleanup_icmpv6; } return 0; @@ -461,8 +460,7 @@ static int ipv6_net_init(struct net *net) static void ipv6_net_exit(struct net *net) { - nf_conntrack_l3proto_unregister(net, - &nf_conntrack_l3proto_ipv6); + nf_ct_l3proto_pernet_unregister(net, &nf_conntrack_l3proto_ipv6); nf_conntrack_l4proto_unregister(net, &nf_conntrack_l4proto_icmpv6); nf_conntrack_l4proto_unregister(net, @@ -491,19 +489,28 @@ static int __init nf_conntrack_l3proto_ipv6_init(void) ret = register_pernet_subsys(&ipv6_net_ops); if (ret < 0) - goto cleanup_pernet; + goto cleanup_sockopt; + ret = nf_register_hooks(ipv6_conntrack_ops, ARRAY_SIZE(ipv6_conntrack_ops)); if (ret < 0) { pr_err("nf_conntrack_ipv6: can't register pre-routing defrag " "hook.\n"); - goto cleanup_ipv6; + goto cleanup_pernet; + } + + ret = nf_ct_l3proto_register(&nf_conntrack_l3proto_ipv6); + if (ret < 0) { + pr_err("nf_conntrack_ipv6: can't register ipv6 proto.\n"); + goto cleanup_hooks; } return ret; - cleanup_ipv6: - unregister_pernet_subsys(&ipv6_net_ops); + cleanup_hooks: + nf_unregister_hooks(ipv6_conntrack_ops, ARRAY_SIZE(ipv6_conntrack_ops)); cleanup_pernet: + unregister_pernet_subsys(&ipv6_net_ops); + cleanup_sockopt: nf_unregister_sockopt(&so_getorigdst6); return ret; } @@ -511,6 +518,7 @@ static int __init nf_conntrack_l3proto_ipv6_init(void) static void __exit nf_conntrack_l3proto_ipv6_fini(void) { synchronize_net(); + nf_ct_l3proto_unregister(&nf_conntrack_l3proto_ipv6); nf_unregister_hooks(ipv6_conntrack_ops, ARRAY_SIZE(ipv6_conntrack_ops)); unregister_pernet_subsys(&ipv6_net_ops); nf_unregister_sockopt(&so_getorigdst6); diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c index f0ec07c..076d827 100644 --- a/net/netfilter/nf_conntrack_proto.c +++ b/net/netfilter/nf_conntrack_proto.c @@ -212,8 +212,7 @@ static void nf_ct_l3proto_unregister_sysctl(struct net *net, #endif } -static int -nf_conntrack_l3proto_register_net(struct nf_conntrack_l3proto *proto) +int nf_ct_l3proto_register(struct nf_conntrack_l3proto *proto) { int ret = 0; struct nf_conntrack_l3proto *old; @@ -242,8 +241,9 @@ out_unlock: return ret; } +EXPORT_SYMBOL_GPL(nf_ct_l3proto_register); -int nf_conntrack_l3proto_register(struct net *net, +int nf_ct_l3proto_pernet_register(struct net *net, struct nf_conntrack_l3proto *proto) { int ret = 0; @@ -254,22 +254,11 @@ int nf_conntrack_l3proto_register(struct net *net, return ret; } - ret = nf_ct_l3proto_register_sysctl(net, proto); - if (ret < 0) - return ret; - - if (net == &init_net) { - ret = nf_conntrack_l3proto_register_net(proto); - if (ret < 0) - nf_ct_l3proto_unregister_sysctl(net, proto); - } - - return ret; + return nf_ct_l3proto_register_sysctl(net, proto); } -EXPORT_SYMBOL_GPL(nf_conntrack_l3proto_register); +EXPORT_SYMBOL_GPL(nf_ct_l3proto_pernet_register); -static void -nf_conntrack_l3proto_unregister_net(struct nf_conntrack_l3proto *proto) +void nf_ct_l3proto_unregister(struct nf_conntrack_l3proto *proto) { BUG_ON(proto->l3proto >= AF_MAX); @@ -283,19 +272,17 @@ nf_conntrack_l3proto_unregister_net(struct nf_conntrack_l3proto *proto) synchronize_rcu(); } +EXPORT_SYMBOL_GPL(nf_ct_l3proto_unregister); -void nf_conntrack_l3proto_unregister(struct net *net, +void nf_ct_l3proto_pernet_unregister(struct net *net, struct nf_conntrack_l3proto *proto) { - if (net == &init_net) - nf_conntrack_l3proto_unregister_net(proto); - nf_ct_l3proto_unregister_sysctl(net, proto); /* Remove all contrack entries for this protocol */ nf_ct_iterate_cleanup(net, kill_l3proto, proto); } -EXPORT_SYMBOL_GPL(nf_conntrack_l3proto_unregister); +EXPORT_SYMBOL_GPL(nf_ct_l3proto_pernet_unregister); static struct nf_proto_net *nf_ct_l4proto_net(struct net *net, struct nf_conntrack_l4proto *l4proto) -- cgit v0.10.2 From c296bb4d5d417d466c9bcc8afef68a3db5449a64 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Wed, 23 Jan 2013 12:51:10 +0100 Subject: netfilter: nf_conntrack: refactor l4proto support for netns Move the code that register/unregister l4proto to the module_init/exit context. Given that we have to modify some interfaces to accomodate these changes, it is a good time to use shorter function names for this using the nf_ct_* prefix instead of nf_conntrack_*, that is: nf_ct_l4proto_register nf_ct_l4proto_pernet_register nf_ct_l4proto_unregister nf_ct_l4proto_pernet_unregister We same many line breaks with it. Signed-off-by: Gao feng Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h index c3be4ae..914d8d9 100644 --- a/include/net/netfilter/nf_conntrack_l4proto.h +++ b/include/net/netfilter/nf_conntrack_l4proto.h @@ -121,12 +121,16 @@ extern struct nf_conntrack_l4proto * nf_ct_l4proto_find_get(u_int16_t l3proto, u_int8_t l4proto); extern void nf_ct_l4proto_put(struct nf_conntrack_l4proto *p); -/* Protocol registration. */ -extern int nf_conntrack_l4proto_register(struct net *net, +/* Protocol pernet registration. */ +extern int nf_ct_l4proto_pernet_register(struct net *net, struct nf_conntrack_l4proto *proto); -extern void nf_conntrack_l4proto_unregister(struct net *net, +extern void nf_ct_l4proto_pernet_unregister(struct net *net, struct nf_conntrack_l4proto *proto); +/* Protocol global registration. */ +extern int nf_ct_l4proto_register(struct nf_conntrack_l4proto *proto); +extern void nf_ct_l4proto_unregister(struct nf_conntrack_l4proto *proto); + static inline void nf_ct_kfree_compat_sysctl_table(struct nf_proto_net *pn) { #if defined(CONFIG_SYSCTL) && defined(CONFIG_NF_CONNTRACK_PROC_COMPAT) diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index 76b84fc..48990ad 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -420,22 +420,19 @@ static int ipv4_net_init(struct net *net) { int ret = 0; - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_tcp4); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_tcp4); if (ret < 0) { - pr_err("nf_conntrack_l4proto_tcp4 :protocol register failed\n"); + pr_err("nf_conntrack_tcp4: pernet registration failed\n"); goto out_tcp; } - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_udp4); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_udp4); if (ret < 0) { - pr_err("nf_conntrack_l4proto_udp4 :protocol register failed\n"); + pr_err("nf_conntrack_udp4: pernet registration failed\n"); goto out_udp; } - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_icmp); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_icmp); if (ret < 0) { - pr_err("nf_conntrack_l4proto_icmp4 :protocol register failed\n"); + pr_err("nf_conntrack_icmp4: pernet registration failed\n"); goto out_icmp; } ret = nf_ct_l3proto_pernet_register(net, &nf_conntrack_l3proto_ipv4); @@ -445,14 +442,11 @@ static int ipv4_net_init(struct net *net) } return 0; out_ipv4: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_icmp); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_icmp); out_icmp: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_udp4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udp4); out_udp: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_tcp4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_tcp4); out_tcp: return ret; } @@ -460,12 +454,9 @@ out_tcp: static void ipv4_net_exit(struct net *net) { nf_ct_l3proto_pernet_unregister(net, &nf_conntrack_l3proto_ipv4); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_icmp); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_udp4); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_tcp4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_icmp); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udp4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_tcp4); } static struct pernet_operations ipv4_net_ops = { @@ -499,10 +490,28 @@ static int __init nf_conntrack_l3proto_ipv4_init(void) goto cleanup_pernet; } + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_tcp4); + if (ret < 0) { + pr_err("nf_conntrack_ipv4: can't register tcp4 proto.\n"); + goto cleanup_hooks; + } + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udp4); + if (ret < 0) { + pr_err("nf_conntrack_ipv4: can't register udp4 proto.\n"); + goto cleanup_tcp4; + } + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_icmp); + if (ret < 0) { + pr_err("nf_conntrack_ipv4: can't register icmpv4 proto.\n"); + goto cleanup_udp4; + } + ret = nf_ct_l3proto_register(&nf_conntrack_l3proto_ipv4); if (ret < 0) { pr_err("nf_conntrack_ipv4: can't register ipv4 proto.\n"); - goto cleanup_hooks; + goto cleanup_icmpv4; } #if defined(CONFIG_PROC_FS) && defined(CONFIG_NF_CONNTRACK_PROC_COMPAT) @@ -515,6 +524,12 @@ static int __init nf_conntrack_l3proto_ipv4_init(void) cleanup_proto: nf_ct_l3proto_unregister(&nf_conntrack_l3proto_ipv4); #endif + cleanup_icmpv4: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_icmp); + cleanup_udp4: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udp4); + cleanup_tcp4: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_tcp4); cleanup_hooks: nf_unregister_hooks(ipv4_conntrack_ops, ARRAY_SIZE(ipv4_conntrack_ops)); cleanup_pernet: @@ -531,6 +546,9 @@ static void __exit nf_conntrack_l3proto_ipv4_fini(void) nf_conntrack_ipv4_compat_fini(); #endif nf_ct_l3proto_unregister(&nf_conntrack_l3proto_ipv4); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_icmp); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udp4); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_tcp4); nf_unregister_hooks(ipv4_conntrack_ops, ARRAY_SIZE(ipv4_conntrack_ops)); unregister_pernet_subsys(&ipv4_net_ops); nf_unregister_sockopt(&so_getorigdst); diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c index 3eaf6ba..8a45bb2 100644 --- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c +++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c @@ -421,22 +421,19 @@ static int ipv6_net_init(struct net *net) { int ret = 0; - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_tcp6); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_tcp6); if (ret < 0) { - printk(KERN_ERR "nf_conntrack_l4proto_tcp6: protocol register failed\n"); + pr_err("nf_conntrack_tcp6: pernet registration failed\n"); goto out; } - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_udp6); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_udp6); if (ret < 0) { - printk(KERN_ERR "nf_conntrack_l4proto_udp6: protocol register failed\n"); + pr_err("nf_conntrack_udp6: pernet registration failed\n"); goto cleanup_tcp6; } - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_icmpv6); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_icmpv6); if (ret < 0) { - printk(KERN_ERR "nf_conntrack_l4proto_icmp6: protocol register failed\n"); + pr_err("nf_conntrack_icmp6: pernet registration failed\n"); goto cleanup_udp6; } ret = nf_ct_l3proto_pernet_register(net, &nf_conntrack_l3proto_ipv6); @@ -446,14 +443,11 @@ static int ipv6_net_init(struct net *net) } return 0; cleanup_icmpv6: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_icmpv6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_icmpv6); cleanup_udp6: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_udp6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udp6); cleanup_tcp6: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_tcp6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_tcp6); out: return ret; } @@ -461,12 +455,9 @@ static int ipv6_net_init(struct net *net) static void ipv6_net_exit(struct net *net) { nf_ct_l3proto_pernet_unregister(net, &nf_conntrack_l3proto_ipv6); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_icmpv6); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_udp6); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_tcp6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_icmpv6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udp6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_tcp6); } static struct pernet_operations ipv6_net_ops = { @@ -499,13 +490,37 @@ static int __init nf_conntrack_l3proto_ipv6_init(void) goto cleanup_pernet; } + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_tcp6); + if (ret < 0) { + pr_err("nf_conntrack_ipv6: can't register tcp6 proto.\n"); + goto cleanup_hooks; + } + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udp6); + if (ret < 0) { + pr_err("nf_conntrack_ipv6: can't register udp6 proto.\n"); + goto cleanup_tcp6; + } + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_icmpv6); + if (ret < 0) { + pr_err("nf_conntrack_ipv6: can't register icmpv6 proto.\n"); + goto cleanup_udp6; + } + ret = nf_ct_l3proto_register(&nf_conntrack_l3proto_ipv6); if (ret < 0) { pr_err("nf_conntrack_ipv6: can't register ipv6 proto.\n"); - goto cleanup_hooks; + goto cleanup_icmpv6; } return ret; + cleanup_icmpv6: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_icmpv6); + cleanup_udp6: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udp6); + cleanup_tcp6: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_tcp6); cleanup_hooks: nf_unregister_hooks(ipv6_conntrack_ops, ARRAY_SIZE(ipv6_conntrack_ops)); cleanup_pernet: @@ -519,6 +534,9 @@ static void __exit nf_conntrack_l3proto_ipv6_fini(void) { synchronize_net(); nf_ct_l3proto_unregister(&nf_conntrack_l3proto_ipv6); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_tcp6); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udp6); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_icmpv6); nf_unregister_hooks(ipv6_conntrack_ops, ARRAY_SIZE(ipv6_conntrack_ops)); unregister_pernet_subsys(&ipv6_net_ops); nf_unregister_sockopt(&so_getorigdst6); diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c index 076d827..58ab405 100644 --- a/net/netfilter/nf_conntrack_proto.c +++ b/net/netfilter/nf_conntrack_proto.c @@ -363,8 +363,7 @@ void nf_ct_l4proto_unregister_sysctl(struct net *net, /* FIXME: Allow NULL functions and sub in pointers to generic for them. --RR */ -static int -nf_conntrack_l4proto_register_net(struct nf_conntrack_l4proto *l4proto) +int nf_ct_l4proto_register(struct nf_conntrack_l4proto *l4proto) { int ret = 0; @@ -418,8 +417,9 @@ out_unlock: mutex_unlock(&nf_ct_proto_mutex); return ret; } +EXPORT_SYMBOL_GPL(nf_ct_l4proto_register); -int nf_conntrack_l4proto_register(struct net *net, +int nf_ct_l4proto_pernet_register(struct net *net, struct nf_conntrack_l4proto *l4proto) { int ret = 0; @@ -439,22 +439,13 @@ int nf_conntrack_l4proto_register(struct net *net, if (ret < 0) goto out; - if (net == &init_net) { - ret = nf_conntrack_l4proto_register_net(l4proto); - if (ret < 0) { - nf_ct_l4proto_unregister_sysctl(net, pn, l4proto); - goto out; - } - } - pn->users++; out: return ret; } -EXPORT_SYMBOL_GPL(nf_conntrack_l4proto_register); +EXPORT_SYMBOL_GPL(nf_ct_l4proto_pernet_register); -static void -nf_conntrack_l4proto_unregister_net(struct nf_conntrack_l4proto *l4proto) +void nf_ct_l4proto_unregister(struct nf_conntrack_l4proto *l4proto) { BUG_ON(l4proto->l3proto >= PF_MAX); @@ -469,15 +460,13 @@ nf_conntrack_l4proto_unregister_net(struct nf_conntrack_l4proto *l4proto) synchronize_rcu(); } +EXPORT_SYMBOL_GPL(nf_ct_l4proto_unregister); -void nf_conntrack_l4proto_unregister(struct net *net, +void nf_ct_l4proto_pernet_unregister(struct net *net, struct nf_conntrack_l4proto *l4proto) { struct nf_proto_net *pn = NULL; - if (net == &init_net) - nf_conntrack_l4proto_unregister_net(l4proto); - pn = nf_ct_l4proto_net(net, l4proto); if (pn == NULL) return; @@ -488,7 +477,7 @@ void nf_conntrack_l4proto_unregister(struct net *net, /* Remove all contrack entries for this protocol */ nf_ct_iterate_cleanup(net, kill_l4proto, l4proto); } -EXPORT_SYMBOL_GPL(nf_conntrack_l4proto_unregister); +EXPORT_SYMBOL_GPL(nf_ct_l4proto_pernet_unregister); int nf_conntrack_proto_pernet_init(struct net *net) { diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index a8ae287..432f957 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -935,32 +935,27 @@ static struct nf_conntrack_l4proto dccp_proto6 __read_mostly = { static __net_init int dccp_net_init(struct net *net) { int ret = 0; - ret = nf_conntrack_l4proto_register(net, - &dccp_proto4); + ret = nf_ct_l4proto_pernet_register(net, &dccp_proto4); if (ret < 0) { - pr_err("nf_conntrack_l4proto_dccp4 :protocol register failed.\n"); + pr_err("nf_conntrack_dccp4: pernet registration failed.\n"); goto out; } - ret = nf_conntrack_l4proto_register(net, - &dccp_proto6); + ret = nf_ct_l4proto_pernet_register(net, &dccp_proto6); if (ret < 0) { - pr_err("nf_conntrack_l4proto_dccp6 :protocol register failed.\n"); + pr_err("nf_conntrack_dccp6: pernet registration failed.\n"); goto cleanup_dccp4; } return 0; cleanup_dccp4: - nf_conntrack_l4proto_unregister(net, - &dccp_proto4); + nf_ct_l4proto_pernet_unregister(net, &dccp_proto4); out: return ret; } static __net_exit void dccp_net_exit(struct net *net) { - nf_conntrack_l4proto_unregister(net, - &dccp_proto6); - nf_conntrack_l4proto_unregister(net, - &dccp_proto4); + nf_ct_l4proto_pernet_unregister(net, &dccp_proto6); + nf_ct_l4proto_pernet_unregister(net, &dccp_proto4); } static struct pernet_operations dccp_net_ops = { @@ -972,11 +967,33 @@ static struct pernet_operations dccp_net_ops = { static int __init nf_conntrack_proto_dccp_init(void) { - return register_pernet_subsys(&dccp_net_ops); + int ret; + + ret = nf_ct_l4proto_register(&dccp_proto4); + if (ret < 0) + goto out_dccp4; + + ret = nf_ct_l4proto_register(&dccp_proto6); + if (ret < 0) + goto out_dccp6; + + ret = register_pernet_subsys(&dccp_net_ops); + if (ret < 0) + goto out_pernet; + + return 0; +out_pernet: + nf_ct_l4proto_unregister(&dccp_proto6); +out_dccp6: + nf_ct_l4proto_unregister(&dccp_proto4); +out_dccp4: + return ret; } static void __exit nf_conntrack_proto_dccp_fini(void) { + nf_ct_l4proto_unregister(&dccp_proto6); + nf_ct_l4proto_unregister(&dccp_proto4); unregister_pernet_subsys(&dccp_net_ops); } diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c index b09b7af..bd7d01d 100644 --- a/net/netfilter/nf_conntrack_proto_gre.c +++ b/net/netfilter/nf_conntrack_proto_gre.c @@ -397,15 +397,15 @@ static struct nf_conntrack_l4proto nf_conntrack_l4proto_gre4 __read_mostly = { static int proto_gre_net_init(struct net *net) { int ret = 0; - ret = nf_conntrack_l4proto_register(net, &nf_conntrack_l4proto_gre4); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_gre4); if (ret < 0) - pr_err("nf_conntrack_l4proto_gre4 :protocol register failed.\n"); + pr_err("nf_conntrack_gre4: pernet registration failed.\n"); return ret; } static void proto_gre_net_exit(struct net *net) { - nf_conntrack_l4proto_unregister(net, &nf_conntrack_l4proto_gre4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_gre4); nf_ct_gre_keymap_flush(net); } @@ -418,11 +418,26 @@ static struct pernet_operations proto_gre_net_ops = { static int __init nf_ct_proto_gre_init(void) { - return register_pernet_subsys(&proto_gre_net_ops); + int ret; + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4); + if (ret < 0) + goto out_gre4; + + ret = register_pernet_subsys(&proto_gre_net_ops); + if (ret < 0) + goto out_pernet; + + return 0; +out_pernet: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_gre4); +out_gre4: + return ret; } static void __exit nf_ct_proto_gre_fini(void) { + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_gre4); unregister_pernet_subsys(&proto_gre_net_ops); } diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c index c746d61..480f616 100644 --- a/net/netfilter/nf_conntrack_proto_sctp.c +++ b/net/netfilter/nf_conntrack_proto_sctp.c @@ -853,33 +853,28 @@ static int sctp_net_init(struct net *net) { int ret = 0; - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_sctp4); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_sctp4); if (ret < 0) { - pr_err("nf_conntrack_l4proto_sctp4 :protocol register failed.\n"); + pr_err("nf_conntrack_sctp4: pernet registration failed.\n"); goto out; } - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_sctp6); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_sctp6); if (ret < 0) { - pr_err("nf_conntrack_l4proto_sctp6 :protocol register failed.\n"); + pr_err("nf_conntrack_sctp6: pernet registration failed.\n"); goto cleanup_sctp4; } return 0; cleanup_sctp4: - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_sctp4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_sctp4); out: return ret; } static void sctp_net_exit(struct net *net) { - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_sctp6); - nf_conntrack_l4proto_unregister(net, - &nf_conntrack_l4proto_sctp4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_sctp6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_sctp4); } static struct pernet_operations sctp_net_ops = { @@ -891,11 +886,33 @@ static struct pernet_operations sctp_net_ops = { static int __init nf_conntrack_proto_sctp_init(void) { - return register_pernet_subsys(&sctp_net_ops); + int ret; + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_sctp4); + if (ret < 0) + goto out_sctp4; + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_sctp6); + if (ret < 0) + goto out_sctp6; + + ret = register_pernet_subsys(&sctp_net_ops); + if (ret < 0) + goto out_pernet; + + return 0; +out_pernet: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp6); +out_sctp6: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp4); +out_sctp4: + return ret; } static void __exit nf_conntrack_proto_sctp_fini(void) { + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp6); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp4); unregister_pernet_subsys(&sctp_net_ops); } diff --git a/net/netfilter/nf_conntrack_proto_udplite.c b/net/netfilter/nf_conntrack_proto_udplite.c index 4b66df2..1574895 100644 --- a/net/netfilter/nf_conntrack_proto_udplite.c +++ b/net/netfilter/nf_conntrack_proto_udplite.c @@ -336,30 +336,28 @@ static int udplite_net_init(struct net *net) { int ret = 0; - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_udplite4); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_udplite4); if (ret < 0) { - pr_err("nf_conntrack_l4proto_udplite4 :protocol register failed.\n"); + pr_err("nf_conntrack_udplite4: pernet registration failed.\n"); goto out; } - ret = nf_conntrack_l4proto_register(net, - &nf_conntrack_l4proto_udplite6); + ret = nf_ct_l4proto_pernet_register(net, &nf_conntrack_l4proto_udplite6); if (ret < 0) { - pr_err("nf_conntrack_l4proto_udplite4 :protocol register failed.\n"); + pr_err("nf_conntrack_udplite6: pernet registration failed.\n"); goto cleanup_udplite4; } return 0; cleanup_udplite4: - nf_conntrack_l4proto_unregister(net, &nf_conntrack_l4proto_udplite4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udplite4); out: return ret; } static void udplite_net_exit(struct net *net) { - nf_conntrack_l4proto_unregister(net, &nf_conntrack_l4proto_udplite6); - nf_conntrack_l4proto_unregister(net, &nf_conntrack_l4proto_udplite4); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udplite6); + nf_ct_l4proto_pernet_unregister(net, &nf_conntrack_l4proto_udplite4); } static struct pernet_operations udplite_net_ops = { @@ -371,11 +369,33 @@ static struct pernet_operations udplite_net_ops = { static int __init nf_conntrack_proto_udplite_init(void) { - return register_pernet_subsys(&udplite_net_ops); + int ret; + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udplite4); + if (ret < 0) + goto out_udplite4; + + ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udplite6); + if (ret < 0) + goto out_udplite6; + + ret = register_pernet_subsys(&udplite_net_ops); + if (ret < 0) + goto out_pernet; + + return 0; +out_pernet: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite6); +out_udplite6: + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite4); +out_udplite4: + return ret; } static void __exit nf_conntrack_proto_udplite_exit(void) { + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite6); + nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite4); unregister_pernet_subsys(&udplite_net_ops); } -- cgit v0.10.2 From 5f9f946b39bff31bc9a4a8be18cef3354d3382ae Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 23 Jan 2013 15:12:25 +0100 Subject: netfilter: nf_conntrack: fix compilation if sysctl are disabled In (f94161c netfilter: nf_conntrack: move initialization out of pernet operations), some ifdefs were missing for sysctl dependent code. Reported-by: kbuild test robot Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 725bf04..7936bf7 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -563,10 +563,14 @@ static int __init nf_conntrack_standalone_init(void) if (ret < 0) goto out_start; +#ifdef CONFIG_SYSCTL nf_ct_netfilter_header = register_net_sysctl(&init_net, "net", nf_ct_netfilter_table); - if (!nf_ct_netfilter_header) + if (!nf_ct_netfilter_header) { + pr_err("nf_conntrack: can't register to sysctl.\n"); goto out_sysctl; + } +#endif ret = register_pernet_subsys(&nf_conntrack_net_ops); if (ret < 0) @@ -576,9 +580,10 @@ static int __init nf_conntrack_standalone_init(void) return 0; out_pernet: +#ifdef CONFIG_SYSCTL unregister_net_sysctl_table(nf_ct_netfilter_header); out_sysctl: - pr_err("nf_conntrack: can't register to sysctl.\n"); +#endif nf_conntrack_cleanup_end(); out_start: return ret; @@ -588,7 +593,9 @@ static void __exit nf_conntrack_standalone_fini(void) { nf_conntrack_cleanup_start(); unregister_pernet_subsys(&nf_conntrack_net_ops); +#ifdef CONFIG_SYSCTL unregister_net_sysctl_table(nf_ct_netfilter_header); +#endif nf_conntrack_cleanup_end(); } -- cgit v0.10.2 From 4a633a602c26497b8285a202830829d3be007c7b Mon Sep 17 00:00:00 2001 From: Matt Wilson Date: Tue, 22 Jan 2013 08:08:25 +0000 Subject: xen-netback: allow changing the MAC address of the interface Sometimes it is useful to be able to change the MAC address of the interface for netback devices. For example, when using ebtables it may be useful to be able to distinguish traffic from different interfaces without depending on the interface name. Reported-by: Nikita Borzykh Reported-by: Paul Harvey Cc: netdev@vger.kernel.org Cc: xen-devel@lists.xen.org Cc: Konrad Rzeszutek Wilk Acked-by: Ian Campbell Signed-off-by: Matt Wilson Reviewed-by: Konrad Rzeszutek Wilk Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index b7d41f8..f733cae 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -238,6 +238,8 @@ static const struct net_device_ops xenvif_netdev_ops = { .ndo_stop = xenvif_close, .ndo_change_mtu = xenvif_change_mtu, .ndo_fix_features = xenvif_fix_features, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, }; struct xenvif *xenvif_alloc(struct device *parent, domid_t domid, -- cgit v0.10.2 From 055dc21a1d1d219608cd4baac7d0683fb2cbbe8a Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 22 Jan 2013 09:49:50 +0000 Subject: soreuseport: infrastructure Definitions and macros for implementing soreusport. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h index 755702e..c519552 100644 --- a/arch/alpha/include/uapi/asm/socket.h +++ b/arch/alpha/include/uapi/asm/socket.h @@ -19,7 +19,7 @@ #define SO_BROADCAST 0x0020 #define SO_LINGER 0x0080 #define SO_OOBINLINE 0x0100 -/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_REUSEPORT 0x0200 #define SO_TYPE 0x1008 #define SO_ERROR 0x1007 diff --git a/arch/avr32/include/uapi/asm/socket.h b/arch/avr32/include/uapi/asm/socket.h index f3f38a0..51c6401 100644 --- a/arch/avr32/include/uapi/asm/socket.h +++ b/arch/avr32/include/uapi/asm/socket.h @@ -22,7 +22,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/cris/include/uapi/asm/socket.h b/arch/cris/include/uapi/asm/socket.h index 406b583..50692b7 100644 --- a/arch/cris/include/uapi/asm/socket.h +++ b/arch/cris/include/uapi/asm/socket.h @@ -24,7 +24,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/frv/include/uapi/asm/socket.h b/arch/frv/include/uapi/asm/socket.h index d8e1132..595391f 100644 --- a/arch/frv/include/uapi/asm/socket.h +++ b/arch/frv/include/uapi/asm/socket.h @@ -22,7 +22,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/h8300/include/uapi/asm/socket.h b/arch/h8300/include/uapi/asm/socket.h index c8b87a8..43e3262 100644 --- a/arch/h8300/include/uapi/asm/socket.h +++ b/arch/h8300/include/uapi/asm/socket.h @@ -22,7 +22,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/ia64/include/uapi/asm/socket.h b/arch/ia64/include/uapi/asm/socket.h index f390896..c567adc 100644 --- a/arch/ia64/include/uapi/asm/socket.h +++ b/arch/ia64/include/uapi/asm/socket.h @@ -31,7 +31,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/m32r/include/uapi/asm/socket.h b/arch/m32r/include/uapi/asm/socket.h index 6a89515..519afa2 100644 --- a/arch/m32r/include/uapi/asm/socket.h +++ b/arch/m32r/include/uapi/asm/socket.h @@ -22,7 +22,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h index 9d11a77..7e27236 100644 --- a/arch/mips/include/uapi/asm/socket.h +++ b/arch/mips/include/uapi/asm/socket.h @@ -28,8 +28,7 @@ #define SO_LINGER 0x0080 /* Block on close of a reliable socket to transmit pending data. */ #define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ -#if 0 -To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ +#define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ #endif #define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ diff --git a/arch/mn10300/include/uapi/asm/socket.h b/arch/mn10300/include/uapi/asm/socket.h index ab702c4..5c7c7c9 100644 --- a/arch/mn10300/include/uapi/asm/socket.h +++ b/arch/mn10300/include/uapi/asm/socket.h @@ -22,7 +22,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h index da2c8d3..526e4b9 100644 --- a/arch/parisc/include/uapi/asm/socket.h +++ b/arch/parisc/include/uapi/asm/socket.h @@ -13,7 +13,7 @@ #define SO_BROADCAST 0x0020 #define SO_LINGER 0x0080 #define SO_OOBINLINE 0x0100 -/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_REUSEPORT 0x0200 #define SO_SNDBUF 0x1001 #define SO_RCVBUF 0x1002 #define SO_SNDBUFFORCE 0x100a diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h index e6ca318..a26dcae 100644 --- a/arch/powerpc/include/uapi/asm/socket.h +++ b/arch/powerpc/include/uapi/asm/socket.h @@ -29,7 +29,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_RCVLOWAT 16 #define SO_SNDLOWAT 17 #define SO_RCVTIMEO 18 diff --git a/arch/s390/include/uapi/asm/socket.h b/arch/s390/include/uapi/asm/socket.h index 9ce60b6..f99eea7 100644 --- a/arch/s390/include/uapi/asm/socket.h +++ b/arch/s390/include/uapi/asm/socket.h @@ -28,7 +28,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/arch/sparc/include/uapi/asm/socket.h b/arch/sparc/include/uapi/asm/socket.h index fbbba57..cbbad74 100644 --- a/arch/sparc/include/uapi/asm/socket.h +++ b/arch/sparc/include/uapi/asm/socket.h @@ -15,7 +15,7 @@ #define SO_PEERCRED 0x0040 #define SO_LINGER 0x0080 #define SO_OOBINLINE 0x0100 -/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_REUSEPORT 0x0200 #define SO_BSDCOMPAT 0x0400 #define SO_RCVLOWAT 0x0800 #define SO_SNDLOWAT 0x1000 diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h index dbf3164..35905cb 100644 --- a/arch/xtensa/include/uapi/asm/socket.h +++ b/arch/xtensa/include/uapi/asm/socket.h @@ -32,7 +32,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 diff --git a/include/linux/random.h b/include/linux/random.h index d984608..347ce55 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -74,4 +74,10 @@ static inline int arch_get_random_int(unsigned int *v) } #endif +/* Pseudo random number generator from numerical recipes. */ +static inline u32 next_pseudo_random32(u32 seed) +{ + return seed * 1664525 + 1013904223; +} + #endif /* _LINUX_RANDOM_H */ diff --git a/include/net/sock.h b/include/net/sock.h index 5a34e2f..581dc6b 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -140,6 +140,7 @@ typedef __u64 __bitwise __addrpair; * @skc_family: network address family * @skc_state: Connection state * @skc_reuse: %SO_REUSEADDR setting + * @skc_reuseport: %SO_REUSEPORT setting * @skc_bound_dev_if: bound device index if != 0 * @skc_bind_node: bind hash linkage for various protocol lookup tables * @skc_portaddr_node: second hash linkage for UDP/UDP-Lite protocol @@ -179,7 +180,8 @@ struct sock_common { unsigned short skc_family; volatile unsigned char skc_state; - unsigned char skc_reuse; + unsigned char skc_reuse:4; + unsigned char skc_reuseport:4; int skc_bound_dev_if; union { struct hlist_node skc_bind_node; @@ -297,6 +299,7 @@ struct sock { #define sk_family __sk_common.skc_family #define sk_state __sk_common.skc_state #define sk_reuse __sk_common.skc_reuse +#define sk_reuseport __sk_common.skc_reuseport #define sk_bound_dev_if __sk_common.skc_bound_dev_if #define sk_bind_node __sk_common.skc_bind_node #define sk_prot __sk_common.skc_prot diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h index 3f6a992..4ef3acb 100644 --- a/include/uapi/asm-generic/socket.h +++ b/include/uapi/asm-generic/socket.h @@ -22,8 +22,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ - +#define SO_REUSEPORT 15 #ifndef SO_PASSCRED /* powerpc only differs in these */ #define SO_PASSCRED 16 #define SO_PEERCRED 17 diff --git a/net/core/sock.c b/net/core/sock.c index 8258fb7..235fb89 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -665,6 +665,9 @@ int sock_setsockopt(struct socket *sock, int level, int optname, case SO_REUSEADDR: sk->sk_reuse = (valbool ? SK_CAN_REUSE : SK_NO_REUSE); break; + case SO_REUSEPORT: + sk->sk_reuseport = valbool; + break; case SO_TYPE: case SO_PROTOCOL: case SO_DOMAIN: @@ -972,6 +975,10 @@ int sock_getsockopt(struct socket *sock, int level, int optname, v.val = sk->sk_reuse; break; + case SO_REUSEPORT: + v.val = sk->sk_reuseport; + break; + case SO_KEEPALIVE: v.val = sock_flag(sk, SOCK_KEEPOPEN); break; -- cgit v0.10.2 From da5e36308d9f7151845018369148201a5d28b46d Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 22 Jan 2013 09:50:24 +0000 Subject: soreuseport: TCP/IPv4 implementation Allow multiple listener sockets to bind to the same port. Motivation for soresuseport would be something like a web server binding to port 80 running with multiple threads, where each thread might have it's own listener socket. This could be done as an alternative to other models: 1) have one listener thread which dispatches completed connections to workers. 2) accept on a single listener socket from multiple threads. In case #1 the listener thread can easily become the bottleneck with high connection turn-over rate. In case #2, the proportion of connections accepted per thread tends to be uneven under high connection load (assuming simple event loop: while (1) { accept(); process() }, wakeup does not promote fairness among the sockets. We have seen the disproportion to be as high as 3:1 ratio between thread accepting most connections and the one accepting the fewest. With so_reusport the distribution is uniform. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index 67a8fa0..7b2ae9d 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -81,7 +81,9 @@ struct inet_bind_bucket { struct net *ib_net; #endif unsigned short port; - signed short fastreuse; + signed char fastreuse; + signed char fastreuseport; + kuid_t fastuid; int num_owners; struct hlist_node node; struct hlist_head owners; @@ -257,15 +259,19 @@ extern void inet_unhash(struct sock *sk); extern struct sock *__inet_lookup_listener(struct net *net, struct inet_hashinfo *hashinfo, + const __be32 saddr, + const __be16 sport, const __be32 daddr, const unsigned short hnum, const int dif); static inline struct sock *inet_lookup_listener(struct net *net, struct inet_hashinfo *hashinfo, + __be32 saddr, __be16 sport, __be32 daddr, __be16 dport, int dif) { - return __inet_lookup_listener(net, hashinfo, daddr, ntohs(dport), dif); + return __inet_lookup_listener(net, hashinfo, saddr, sport, + daddr, ntohs(dport), dif); } /* Socket demux engine toys. */ @@ -358,7 +364,8 @@ static inline struct sock *__inet_lookup(struct net *net, struct sock *sk = __inet_lookup_established(net, hashinfo, saddr, sport, daddr, hnum, dif); - return sk ? : __inet_lookup_listener(net, hashinfo, daddr, hnum, dif); + return sk ? : __inet_lookup_listener(net, hashinfo, saddr, sport, + daddr, hnum, dif); } static inline struct sock *inet_lookup(struct net *net, diff --git a/include/net/netfilter/nf_tproxy_core.h b/include/net/netfilter/nf_tproxy_core.h index 75ca929..1937964 100644 --- a/include/net/netfilter/nf_tproxy_core.h +++ b/include/net/netfilter/nf_tproxy_core.h @@ -82,6 +82,7 @@ nf_tproxy_get_sock_v4(struct net *net, const u8 protocol, break; case NFT_LOOKUP_LISTENER: sk = inet_lookup_listener(net, &tcp_hashinfo, + saddr, sport, daddr, dport, in->ifindex); diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index d0670f0..8bb623d 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -59,6 +59,8 @@ int inet_csk_bind_conflict(const struct sock *sk, struct sock *sk2; struct hlist_node *node; int reuse = sk->sk_reuse; + int reuseport = sk->sk_reuseport; + kuid_t uid = sock_i_uid((struct sock *)sk); /* * Unlike other sk lookup places we do not check @@ -73,8 +75,11 @@ int inet_csk_bind_conflict(const struct sock *sk, (!sk->sk_bound_dev_if || !sk2->sk_bound_dev_if || sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) { - if (!reuse || !sk2->sk_reuse || - sk2->sk_state == TCP_LISTEN) { + if ((!reuse || !sk2->sk_reuse || + sk2->sk_state == TCP_LISTEN) && + (!reuseport || !sk2->sk_reuseport || + (sk2->sk_state != TCP_TIME_WAIT && + !uid_eq(uid, sock_i_uid(sk2))))) { const __be32 sk2_rcv_saddr = sk_rcv_saddr(sk2); if (!sk2_rcv_saddr || !sk_rcv_saddr(sk) || sk2_rcv_saddr == sk_rcv_saddr(sk)) @@ -106,6 +111,7 @@ int inet_csk_get_port(struct sock *sk, unsigned short snum) int ret, attempts = 5; struct net *net = sock_net(sk); int smallest_size = -1, smallest_rover; + kuid_t uid = sock_i_uid(sk); local_bh_disable(); if (!snum) { @@ -125,9 +131,12 @@ again: spin_lock(&head->lock); inet_bind_bucket_for_each(tb, node, &head->chain) if (net_eq(ib_net(tb), net) && tb->port == rover) { - if (tb->fastreuse > 0 && - sk->sk_reuse && - sk->sk_state != TCP_LISTEN && + if (((tb->fastreuse > 0 && + sk->sk_reuse && + sk->sk_state != TCP_LISTEN) || + (tb->fastreuseport > 0 && + sk->sk_reuseport && + uid_eq(tb->fastuid, uid))) && (tb->num_owners < smallest_size || smallest_size == -1)) { smallest_size = tb->num_owners; smallest_rover = rover; @@ -185,14 +194,17 @@ tb_found: if (sk->sk_reuse == SK_FORCE_REUSE) goto success; - if (tb->fastreuse > 0 && - sk->sk_reuse && sk->sk_state != TCP_LISTEN && + if (((tb->fastreuse > 0 && + sk->sk_reuse && sk->sk_state != TCP_LISTEN) || + (tb->fastreuseport > 0 && + sk->sk_reuseport && uid_eq(tb->fastuid, uid))) && smallest_size == -1) { goto success; } else { ret = 1; if (inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb, true)) { - if (sk->sk_reuse && sk->sk_state != TCP_LISTEN && + if (((sk->sk_reuse && sk->sk_state != TCP_LISTEN) || + (sk->sk_reuseport && uid_eq(tb->fastuid, uid))) && smallest_size != -1 && --attempts >= 0) { spin_unlock(&head->lock); goto again; @@ -212,9 +224,23 @@ tb_not_found: tb->fastreuse = 1; else tb->fastreuse = 0; - } else if (tb->fastreuse && - (!sk->sk_reuse || sk->sk_state == TCP_LISTEN)) - tb->fastreuse = 0; + if (sk->sk_reuseport) { + tb->fastreuseport = 1; + tb->fastuid = uid; + } else { + tb->fastreuseport = 0; + tb->fastuid = 0; + } + } else { + if (tb->fastreuse && + (!sk->sk_reuse || sk->sk_state == TCP_LISTEN)) + tb->fastreuse = 0; + if (tb->fastreuseport && + (!sk->sk_reuseport || !uid_eq(tb->fastuid, uid))) { + tb->fastreuseport = 0; + tb->fastuid = 0; + } + } success: if (!inet_csk(sk)->icsk_bind_hash) inet_bind_hash(sk, tb, snum); diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index fa3ae81..0ce0595 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -39,6 +39,7 @@ struct inet_bind_bucket *inet_bind_bucket_create(struct kmem_cache *cachep, write_pnet(&tb->ib_net, hold_net(net)); tb->port = snum; tb->fastreuse = 0; + tb->fastreuseport = 0; tb->num_owners = 0; INIT_HLIST_HEAD(&tb->owners); hlist_add_head(&tb->node, &head->chain); @@ -151,16 +152,16 @@ static inline int compute_score(struct sock *sk, struct net *net, if (net_eq(sock_net(sk), net) && inet->inet_num == hnum && !ipv6_only_sock(sk)) { __be32 rcv_saddr = inet->inet_rcv_saddr; - score = sk->sk_family == PF_INET ? 1 : 0; + score = sk->sk_family == PF_INET ? 2 : 1; if (rcv_saddr) { if (rcv_saddr != daddr) return -1; - score += 2; + score += 4; } if (sk->sk_bound_dev_if) { if (sk->sk_bound_dev_if != dif) return -1; - score += 2; + score += 4; } } return score; @@ -176,6 +177,7 @@ static inline int compute_score(struct sock *sk, struct net *net, struct sock *__inet_lookup_listener(struct net *net, struct inet_hashinfo *hashinfo, + const __be32 saddr, __be16 sport, const __be32 daddr, const unsigned short hnum, const int dif) { @@ -183,17 +185,29 @@ struct sock *__inet_lookup_listener(struct net *net, struct hlist_nulls_node *node; unsigned int hash = inet_lhashfn(net, hnum); struct inet_listen_hashbucket *ilb = &hashinfo->listening_hash[hash]; - int score, hiscore; + int score, hiscore, matches = 0, reuseport = 0; + u32 phash = 0; rcu_read_lock(); begin: result = NULL; - hiscore = -1; + hiscore = 0; sk_nulls_for_each_rcu(sk, node, &ilb->head) { score = compute_score(sk, net, hnum, daddr, dif); if (score > hiscore) { result = sk; hiscore = score; + reuseport = sk->sk_reuseport; + if (reuseport) { + phash = inet_ehashfn(net, daddr, hnum, + saddr, sport); + matches = 1; + } + } else if (score == hiscore && reuseport) { + matches++; + if (((u64)phash * matches) >> 32 == 0) + result = sk; + phash = next_pseudo_random32(phash); } } /* @@ -501,7 +515,8 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, inet_bind_bucket_for_each(tb, node, &head->chain) { if (net_eq(ib_net(tb), net) && tb->port == port) { - if (tb->fastreuse >= 0) + if (tb->fastreuse >= 0 || + tb->fastreuseport >= 0) goto next_port; WARN_ON(hlist_empty(&tb->owners)); if (!check_established(death_row, sk, @@ -518,6 +533,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, break; } tb->fastreuse = -1; + tb->fastreuseport = -1; goto ok; next_port: diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index c6ce9ca..bbbdcc5 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -657,7 +657,8 @@ static void tcp_v4_send_reset(struct sock *sk, struct sk_buff *skb) * no RST generated if md5 hash doesn't match. */ sk1 = __inet_lookup_listener(dev_net(skb_dst(skb)->dev), - &tcp_hashinfo, ip_hdr(skb)->daddr, + &tcp_hashinfo, ip_hdr(skb)->saddr, + th->source, ip_hdr(skb)->daddr, ntohs(th->source), inet_iif(skb)); /* don't send rst if it can't find key */ if (!sk1) @@ -2074,6 +2075,7 @@ do_time_wait: case TCP_TW_SYN: { struct sock *sk2 = inet_lookup_listener(dev_net(skb->dev), &tcp_hashinfo, + iph->saddr, th->source, iph->daddr, th->dest, inet_iif(skb)); if (sk2) { -- cgit v0.10.2 From ba418fa357a7b3c9d477f4706c6c7c96ddbd1360 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 22 Jan 2013 09:50:32 +0000 Subject: soreuseport: UDP/IPv4 implementation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allow multiple UDP sockets to bind to the same port. Motivation soreuseport would be something like a DNS server.  An alternative would be to recv on the same socket from multiple threads. As in the case of TCP, the load across these threads tends to be disproportionate and we also see a lot of contection on the socketlock. Note that SO_REUSEADDR already allows multiple UDP sockets to bind to the same port, however there is no provision to prevent hijacking and nothing to distribute packets across all the sockets sharing the same bound port.  This patch does not change the semantics of SO_REUSEADDR, but provides usable functionality of it for unicast. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index cf6158f..e0610e4 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -139,6 +139,7 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num, { struct sock *sk2; struct hlist_nulls_node *node; + kuid_t uid = sock_i_uid(sk); sk_nulls_for_each(sk2, node, &hslot->head) if (net_eq(sock_net(sk2), net) && @@ -147,6 +148,8 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num, (!sk2->sk_reuse || !sk->sk_reuse) && (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if || sk2->sk_bound_dev_if == sk->sk_bound_dev_if) && + (!sk2->sk_reuseport || !sk->sk_reuseport || + !uid_eq(uid, sock_i_uid(sk2))) && (*saddr_comp)(sk, sk2)) { if (bitmap) __set_bit(udp_sk(sk2)->udp_port_hash >> log, @@ -169,6 +172,7 @@ static int udp_lib_lport_inuse2(struct net *net, __u16 num, { struct sock *sk2; struct hlist_nulls_node *node; + kuid_t uid = sock_i_uid(sk); int res = 0; spin_lock(&hslot2->lock); @@ -179,6 +183,8 @@ static int udp_lib_lport_inuse2(struct net *net, __u16 num, (!sk2->sk_reuse || !sk->sk_reuse) && (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if || sk2->sk_bound_dev_if == sk->sk_bound_dev_if) && + (!sk2->sk_reuseport || !sk->sk_reuseport || + !uid_eq(uid, sock_i_uid(sk2))) && (*saddr_comp)(sk, sk2)) { res = 1; break; @@ -337,26 +343,26 @@ static inline int compute_score(struct sock *sk, struct net *net, __be32 saddr, !ipv6_only_sock(sk)) { struct inet_sock *inet = inet_sk(sk); - score = (sk->sk_family == PF_INET ? 1 : 0); + score = (sk->sk_family == PF_INET ? 2 : 1); if (inet->inet_rcv_saddr) { if (inet->inet_rcv_saddr != daddr) return -1; - score += 2; + score += 4; } if (inet->inet_daddr) { if (inet->inet_daddr != saddr) return -1; - score += 2; + score += 4; } if (inet->inet_dport) { if (inet->inet_dport != sport) return -1; - score += 2; + score += 4; } if (sk->sk_bound_dev_if) { if (sk->sk_bound_dev_if != dif) return -1; - score += 2; + score += 4; } } return score; @@ -365,7 +371,6 @@ static inline int compute_score(struct sock *sk, struct net *net, __be32 saddr, /* * In this second variant, we check (daddr, dport) matches (inet_rcv_sadd, inet_num) */ -#define SCORE2_MAX (1 + 2 + 2 + 2) static inline int compute_score2(struct sock *sk, struct net *net, __be32 saddr, __be16 sport, __be32 daddr, unsigned int hnum, int dif) @@ -380,21 +385,21 @@ static inline int compute_score2(struct sock *sk, struct net *net, if (inet->inet_num != hnum) return -1; - score = (sk->sk_family == PF_INET ? 1 : 0); + score = (sk->sk_family == PF_INET ? 2 : 1); if (inet->inet_daddr) { if (inet->inet_daddr != saddr) return -1; - score += 2; + score += 4; } if (inet->inet_dport) { if (inet->inet_dport != sport) return -1; - score += 2; + score += 4; } if (sk->sk_bound_dev_if) { if (sk->sk_bound_dev_if != dif) return -1; - score += 2; + score += 4; } } return score; @@ -409,19 +414,29 @@ static struct sock *udp4_lib_lookup2(struct net *net, { struct sock *sk, *result; struct hlist_nulls_node *node; - int score, badness; + int score, badness, matches = 0, reuseport = 0; + u32 hash = 0; begin: result = NULL; - badness = -1; + badness = 0; udp_portaddr_for_each_entry_rcu(sk, node, &hslot2->head) { score = compute_score2(sk, net, saddr, sport, daddr, hnum, dif); if (score > badness) { result = sk; badness = score; - if (score == SCORE2_MAX) - goto exact_match; + reuseport = sk->sk_reuseport; + if (reuseport) { + hash = inet_ehashfn(net, daddr, hnum, + saddr, htons(sport)); + matches = 1; + } + } else if (score == badness && reuseport) { + matches++; + if (((u64)hash * matches) >> 32 == 0) + result = sk; + hash = next_pseudo_random32(hash); } } /* @@ -431,9 +446,7 @@ begin: */ if (get_nulls_value(node) != slot2) goto begin; - if (result) { -exact_match: if (unlikely(!atomic_inc_not_zero_hint(&result->sk_refcnt, 2))) result = NULL; else if (unlikely(compute_score2(result, net, saddr, sport, @@ -457,7 +470,8 @@ struct sock *__udp4_lib_lookup(struct net *net, __be32 saddr, unsigned short hnum = ntohs(dport); unsigned int hash2, slot2, slot = udp_hashfn(net, hnum, udptable->mask); struct udp_hslot *hslot2, *hslot = &udptable->hash[slot]; - int score, badness; + int score, badness, matches = 0, reuseport = 0; + u32 hash = 0; rcu_read_lock(); if (hslot->count > 10) { @@ -486,13 +500,24 @@ struct sock *__udp4_lib_lookup(struct net *net, __be32 saddr, } begin: result = NULL; - badness = -1; + badness = 0; sk_nulls_for_each_rcu(sk, node, &hslot->head) { score = compute_score(sk, net, saddr, hnum, sport, daddr, dport, dif); if (score > badness) { result = sk; badness = score; + reuseport = sk->sk_reuseport; + if (reuseport) { + hash = inet_ehashfn(net, daddr, hnum, + saddr, htons(sport)); + matches = 1; + } + } else if (score == badness && reuseport) { + matches++; + if (((u64)hash * matches) >> 32 == 0) + result = sk; + hash = next_pseudo_random32(hash); } } /* -- cgit v0.10.2 From 5ba24953e9707387cce87b07f0d5fbdd03c5c11b Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 22 Jan 2013 09:50:39 +0000 Subject: soreuseport: TCP/IPv6 implementation Motivation for soreuseport would be something like a web server binding to port 80 running with multiple threads, where each thread might have it's own listener socket. This could be done as an alternative to other models: 1) have one listener thread which dispatches completed connections to workers. 2) accept on a single listener socket from multiple threads. In case #1 the listener thread can easily become the bottleneck with high connection turn-over rate. In case #2, the proportion of connections accepted per thread tends to be uneven under high connection load (assuming simple event loop: while (1) { accept(); process() }, wakeup does not promote fairness among the sockets. We have seen the disproportion to be as high as 3:1 ratio between thread accepting most connections and the one accepting the fewest. With so_reusport the distribution is uniform. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h index 9e34c87..7ca75cb 100644 --- a/include/net/inet6_hashtables.h +++ b/include/net/inet6_hashtables.h @@ -71,6 +71,8 @@ extern struct sock *__inet6_lookup_established(struct net *net, extern struct sock *inet6_lookup_listener(struct net *net, struct inet_hashinfo *hashinfo, + const struct in6_addr *saddr, + const __be16 sport, const struct in6_addr *daddr, const unsigned short hnum, const int dif); @@ -88,7 +90,8 @@ static inline struct sock *__inet6_lookup(struct net *net, if (sk) return sk; - return inet6_lookup_listener(net, hashinfo, daddr, hnum, dif); + return inet6_lookup_listener(net, hashinfo, saddr, sport, + daddr, hnum, dif); } static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo, diff --git a/include/net/netfilter/nf_tproxy_core.h b/include/net/netfilter/nf_tproxy_core.h index 1937964..36d9379 100644 --- a/include/net/netfilter/nf_tproxy_core.h +++ b/include/net/netfilter/nf_tproxy_core.h @@ -152,6 +152,7 @@ nf_tproxy_get_sock_v6(struct net *net, const u8 protocol, break; case NFT_LOOKUP_LISTENER: sk = inet6_lookup_listener(net, &tcp_hashinfo, + saddr, sport, daddr, ntohs(dport), in->ifindex); diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index 3064785..e4297a3 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -32,6 +32,9 @@ int inet6_csk_bind_conflict(const struct sock *sk, { const struct sock *sk2; const struct hlist_node *node; + int reuse = sk->sk_reuse; + int reuseport = sk->sk_reuseport; + int uid = sock_i_uid((struct sock *)sk); /* We must walk the whole port owner list in this case. -DaveM */ /* @@ -42,11 +45,17 @@ int inet6_csk_bind_conflict(const struct sock *sk, if (sk != sk2 && (!sk->sk_bound_dev_if || !sk2->sk_bound_dev_if || - sk->sk_bound_dev_if == sk2->sk_bound_dev_if) && - (!sk->sk_reuse || !sk2->sk_reuse || - sk2->sk_state == TCP_LISTEN) && - ipv6_rcv_saddr_equal(sk, sk2)) - break; + sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) { + if ((!reuse || !sk2->sk_reuse || + sk2->sk_state == TCP_LISTEN) && + (!reuseport || !sk2->sk_reuseport || + (sk2->sk_state != TCP_TIME_WAIT && + !uid_eq(uid, + sock_i_uid((struct sock *)sk2))))) { + if (ipv6_rcv_saddr_equal(sk, sk2)) + break; + } + } } return node != NULL; diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index dea17fd..32b4a16 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -158,25 +158,38 @@ static inline int compute_score(struct sock *sk, struct net *net, } struct sock *inet6_lookup_listener(struct net *net, - struct inet_hashinfo *hashinfo, const struct in6_addr *daddr, + struct inet_hashinfo *hashinfo, const struct in6_addr *saddr, + const __be16 sport, const struct in6_addr *daddr, const unsigned short hnum, const int dif) { struct sock *sk; const struct hlist_nulls_node *node; struct sock *result; - int score, hiscore; + int score, hiscore, matches = 0, reuseport = 0; + u32 phash = 0; unsigned int hash = inet_lhashfn(net, hnum); struct inet_listen_hashbucket *ilb = &hashinfo->listening_hash[hash]; rcu_read_lock(); begin: result = NULL; - hiscore = -1; + hiscore = 0; sk_nulls_for_each(sk, node, &ilb->head) { score = compute_score(sk, net, hnum, daddr, dif); if (score > hiscore) { hiscore = score; result = sk; + reuseport = sk->sk_reuseport; + if (reuseport) { + phash = inet6_ehashfn(net, daddr, hnum, + saddr, sport); + matches = 1; + } + } else if (score == hiscore && reuseport) { + matches++; + if (((u64)phash * matches) >> 32 == 0) + result = sk; + phash = next_pseudo_random32(phash); } } /* diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 3701c3c..06087e5 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -834,7 +834,8 @@ static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb) * no RST generated if md5 hash doesn't match. */ sk1 = inet6_lookup_listener(dev_net(skb_dst(skb)->dev), - &tcp_hashinfo, &ipv6h->daddr, + &tcp_hashinfo, &ipv6h->saddr, + th->source, &ipv6h->daddr, ntohs(th->source), inet6_iif(skb)); if (!sk1) return; @@ -1598,6 +1599,7 @@ do_time_wait: struct sock *sk2; sk2 = inet6_lookup_listener(dev_net(skb->dev), &tcp_hashinfo, + &ipv6_hdr(skb)->saddr, th->source, &ipv6_hdr(skb)->daddr, ntohs(th->dest), inet6_iif(skb)); if (sk2 != NULL) { -- cgit v0.10.2 From 72289b96c943757220ccc681fe2e22b46e21aced Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 22 Jan 2013 09:50:44 +0000 Subject: soreuseport: UDP/IPv6 implementation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Motivation for soreuseport would be something like a DNS server.  An alternative would be to recv on the same socket from multiple threads. As in the case of TCP, the load across these threads tends to be disproportionate and we also see a lot of contection on the socket lock. Note that SO_REUSEADDR already allows multiple UDP sockets to bind to the same port, however there is no provision to prevent hijacking and nothing to distribute packets across all the sockets sharing the same bound port.  This patch does not change the semantics of SO_REUSEADDR, but provides usable functionality of it for unicast. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 1afb635..cb5bf49 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -203,7 +204,8 @@ static struct sock *udp6_lib_lookup2(struct net *net, { struct sock *sk, *result; struct hlist_nulls_node *node; - int score, badness; + int score, badness, matches = 0, reuseport = 0; + u32 hash = 0; begin: result = NULL; @@ -214,8 +216,18 @@ begin: if (score > badness) { result = sk; badness = score; - if (score == SCORE2_MAX) + reuseport = sk->sk_reuseport; + if (reuseport) { + hash = inet6_ehashfn(net, daddr, hnum, + saddr, sport); + matches = 1; + } else if (score == SCORE2_MAX) goto exact_match; + } else if (score == badness && reuseport) { + matches++; + if (((u64)hash * matches) >> 32 == 0) + result = sk; + hash = next_pseudo_random32(hash); } } /* @@ -249,7 +261,8 @@ struct sock *__udp6_lib_lookup(struct net *net, unsigned short hnum = ntohs(dport); unsigned int hash2, slot2, slot = udp_hashfn(net, hnum, udptable->mask); struct udp_hslot *hslot2, *hslot = &udptable->hash[slot]; - int score, badness; + int score, badness, matches = 0, reuseport = 0; + u32 hash = 0; rcu_read_lock(); if (hslot->count > 10) { @@ -284,6 +297,17 @@ begin: if (score > badness) { result = sk; badness = score; + reuseport = sk->sk_reuseport; + if (reuseport) { + hash = inet6_ehashfn(net, daddr, hnum, + saddr, sport); + matches = 1; + } + } else if (score == badness && reuseport) { + matches++; + if (((u64)hash * matches) >> 32 == 0) + result = sk; + hash = next_pseudo_random32(hash); } } /* -- cgit v0.10.2 From f5ae62799a31fb2ce8b272bf184688e2a4770d19 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 23 Jan 2013 00:18:36 +0000 Subject: gianfar: Restore promisc mode on gfar_init_mac() Reactivate promiscuous mode in H/W upon gfar_init_mac(), if the net dev requires it (IFF_PROMISC flag set). This way the promisc mode is preserved accross device reset conditions like tx timeout, device restore, a.s.o. Signed-off-by: Voncken C Acksys Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index bffb2ed..e765b9b 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -355,6 +355,10 @@ static void gfar_init_mac(struct net_device *ndev) gfar_write(®s->rir0, DEFAULT_RIR0); } + /* Restore PROMISC mode */ + if (ndev->flags & IFF_PROMISC) + rctrl |= RCTRL_PROM; + if (ndev->features & NETIF_F_RXCSUM) rctrl |= RCTRL_CHECKSUMMING; -- cgit v0.10.2 From 2de67439c1f50e32fb54ca70786fcfa96c5bfd53 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:43 +0000 Subject: bnx2x: Semantic renovation Mostly corrects white spaces, indentations, and comments. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 3e08a24..9e8c37d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -141,8 +141,8 @@ do { \ #define bnx2x_mc_addr(ha) ((ha)->addr) #define bnx2x_uc_addr(ha) ((ha)->addr) -#define U64_LO(x) (u32)(((u64)(x)) & 0xffffffff) -#define U64_HI(x) (u32)(((u64)(x)) >> 32) +#define U64_LO(x) ((u32)(((u64)(x)) & 0xffffffff)) +#define U64_HI(x) ((u32)(((u64)(x)) >> 32)) #define HILO_U64(hi, lo) ((((u64)(hi)) << 32) + (lo)) @@ -812,7 +812,7 @@ struct bnx2x_common { #define CHIP_NUM_57811 0x163d #define CHIP_NUM_57811_MF 0x163e #define CHIP_NUM_57811_VF 0x163f -#define CHIP_NUM_57840_OBSOLETE 0x168d +#define CHIP_NUM_57840_OBSOLETE 0x168d #define CHIP_NUM_57840_MF_OBSOLETE 0x16ab #define CHIP_NUM_57840_4_10 0x16a1 #define CHIP_NUM_57840_2_20 0x16a2 @@ -1195,11 +1195,11 @@ struct bnx2x_fw_stats_req { }; struct bnx2x_fw_stats_data { - struct stats_counter storm_counters; - struct per_port_stats port; - struct per_pf_stats pf; + struct stats_counter storm_counters; + struct per_port_stats port; + struct per_pf_stats pf; struct fcoe_statistics_params fcoe; - struct per_queue_stats queue_stats[1]; + struct per_queue_stats queue_stats[1]; }; /* Public slow path states */ @@ -1343,8 +1343,6 @@ struct bnx2x { __le16 *eq_cons_sb; atomic_t eq_spq_left; /* COMMON_XXX ramrods credit */ - - /* Counter for marking that there is a STAT_QUERY ramrod pending */ u16 stats_pending; /* Counter for completed statistics ramrods */ @@ -2076,10 +2074,8 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, #define BNX2X_LOOPBACK_FAILED (BNX2X_MAC_LOOPBACK_FAILED | \ BNX2X_PHY_LOOPBACK_FAILED) - #define STROM_ASSERT_ARRAY_SIZE 50 - /* must be used on a CID before placing it on a HW ring */ #define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \ (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \ @@ -2110,7 +2106,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, /* Memory of fairness algorithm . 2 cycles */ #define FAIR_MEM 2 - #define ATTN_NIG_FOR_FUNC (1L << 8) #define ATTN_SW_TIMER_4_FUNC (1L << 9) #define GPIO_2_FUNC (1L << 10) @@ -2215,7 +2210,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, #define MULTI_MASK 0x7f - #define DEF_USB_FUNC_OFF offsetof(struct cstorm_def_status_block_u, func) #define DEF_CSB_FUNC_OFF offsetof(struct cstorm_def_status_block_c, func) #define DEF_XSB_FUNC_OFF offsetof(struct xstorm_def_status_block, func) @@ -2243,18 +2237,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, (&bp->def_status_blk->sp_sb.\ index_values[HC_SP_INDEX_ETH_DEF_CONS]) -#define SET_FLAG(value, mask, flag) \ - do {\ - (value) &= ~(mask);\ - (value) |= ((flag) << (mask##_SHIFT));\ - } while (0) - -#define GET_FLAG(value, mask) \ - (((value) & (mask)) >> (mask##_SHIFT)) - -#define GET_FIELD(value, fname) \ - (((value) & (fname##_MASK)) >> (fname##_SHIFT)) - #define CAM_IS_INVALID(x) \ (GET_FLAG(x.flags, \ MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \ @@ -2265,7 +2247,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, #define MC_HASH_OFFSET(bp, i) (BAR_TSTRORM_INTMEM + \ TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(BP_FUNC(bp)) + i*4) - #ifndef PXP2_REG_PXP2_INT_STS #define PXP2_REG_PXP2_INT_STS PXP2_REG_PXP2_INT_STS_0 #endif @@ -2285,8 +2266,8 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, (!((me_reg) & ME_REG_VF_ERR))) int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code); /* Congestion management fairness mode */ -#define CMNG_FNS_NONE 0 -#define CMNG_FNS_MINMAX 1 +#define CMNG_FNS_NONE 0 +#define CMNG_FNS_MINMAX 1 #define HC_SEG_ACCESS_DEF 0 /*Driver decision 0-3*/ #define HC_SEG_ACCESS_ATTN 4 @@ -2302,7 +2283,6 @@ static const u32 dmae_reg_go_c[] = { void bnx2x_set_ethtool_ops(struct net_device *netdev); void bnx2x_notify_link_changed(struct bnx2x *bp); - #define BNX2X_MF_SD_PROTOCOL(bp) \ ((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK) @@ -2323,6 +2303,18 @@ void bnx2x_notify_link_changed(struct bnx2x *bp); (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \ BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) +#define SET_FLAG(value, mask, flag) \ + do {\ + (value) &= ~(mask);\ + (value) |= ((flag) << (mask##_SHIFT));\ + } while (0) + +#define GET_FLAG(value, mask) \ + (((value) & (mask)) >> (mask##_SHIFT)) + +#define GET_FIELD(value, fname) \ + (((value) & (fname##_MASK)) >> (fname##_SHIFT)) + enum { SWITCH_UPDATE, AFEX_UPDATE, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 49810a0..96a60f0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -237,7 +237,7 @@ int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata) txdata->txq_index, hw_cons, sw_cons, pkt_cons); bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons, - &pkts_compl, &bytes_compl); + &pkts_compl, &bytes_compl); sw_cons++; } @@ -343,14 +343,14 @@ static inline void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp, fp->last_max_sge, fp->rx_sge_prod); } -/* Set Toeplitz hash value in the skb using the value from the +/* Get Toeplitz hash value in the skb using the value from the * CQE (calculated by HW). */ static u32 bnx2x_get_rxhash(const struct bnx2x *bp, const struct eth_fast_path_rx_cqe *cqe, bool *l4_rxhash) { - /* Set Toeplitz hash from CQE */ + /* Get Toeplitz hash from CQE */ if ((bp->dev->features & NETIF_F_RXHASH) && (cqe->status_flags & ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG)) { enum eth_rss_hash_type htype; @@ -449,7 +449,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, * * Approximate value of the MSS for this aggregation calculated using * the first packet of it. - * Compute number of aggregated segments, and gso_type + * Compute number of aggregated segments, and gso_type. */ static void bnx2x_set_gro_params(struct sk_buff *skb, u16 parsing_flags, u16 len_on_bd, unsigned int pkt_len) @@ -619,7 +619,6 @@ static void *bnx2x_frag_alloc(const struct bnx2x_fastpath *fp) return kmalloc(fp->rx_buf_size + NET_SKB_PAD, GFP_ATOMIC); } - #ifdef CONFIG_INET static void bnx2x_gro_ip_csum(struct bnx2x *bp, struct sk_buff *skb) { @@ -1827,7 +1826,6 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp)); } - void bnx2x_set_num_queues(struct bnx2x *bp) { /* RSS queues */ @@ -2483,7 +2481,6 @@ load_error_cnic0: #endif /* ! BNX2X_STOP_ON_ERROR */ } - /* must be called with rtnl_lock */ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) { @@ -3064,7 +3061,6 @@ int bnx2x_poll(struct napi_struct *napi, int budget) if (bnx2x_tx_queue_has_work(fp->txdata_ptr[cos])) bnx2x_tx_int(bp, fp->txdata_ptr[cos]); - if (bnx2x_has_rx_work(fp)) { work_done += bnx2x_rx_int(fp, budget - work_done); @@ -3337,12 +3333,12 @@ static inline void bnx2x_set_pbd_gso(struct sk_buff *skb, * 57712 related */ static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb, - u32 *parsing_data, u32 xmit_type) + u32 *parsing_data, u32 xmit_type) { *parsing_data |= - ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) << - ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) & - ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W; + ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) << + ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) & + ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W; if (xmit_type & XMIT_CSUM_TCP) { *parsing_data |= ((tcp_hdrlen(skb) / 4) << @@ -3488,8 +3484,8 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb(skb); return NETDEV_TX_OK; } - bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; - netif_tx_stop_queue(txq); + bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; + netif_tx_stop_queue(txq); BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); return NETDEV_TX_BUSY; @@ -4254,7 +4250,7 @@ int bnx2x_alloc_mem_bp(struct bnx2x *bp) /* * The biggest MSI-X table we might need is as a maximum number of fast - * path IGU SBs plus default SB (for PF). + * path IGU SBs plus default SB (for PF only). */ msix_table_size = bp->igu_sb_cnt; if (IS_PF(bp)) @@ -4364,7 +4360,7 @@ int bnx2x_get_link_cfg_idx(struct bnx2x *bp) { u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp); /* - * The selected actived PHY is always after swapping (in case PHY + * The selected activated PHY is always after swapping (in case PHY * swapping is enabled). So when swapping is enabled, we need to reverse * the configuration */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index faad34f..d126c85 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -975,7 +975,6 @@ static inline int bnx2x_func_start(struct bnx2x *bp) return bnx2x_func_state_change(bp, &func_params); } - /** * bnx2x_set_fw_mac_addr - fill in a MAC address in FW format * @@ -1391,7 +1390,7 @@ static inline bool bnx2x_is_valid_ether_addr(struct bnx2x *bp, u8 *addr) } /** - * bnx2x_fill_fw_str - Fill buffer with FW version string. + * bnx2x_fill_fw_str - Fill buffer with FW version string * * @bp: driver handle * @buf: character buffer to fill with the fw name diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 37a2e9a..5682054 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -416,6 +416,7 @@ static void bnx2x_pfc_set_pfc(struct bnx2x *bp) int mfw_configured = SHMEM2_HAS(bp, drv_flags) && GET_FLAGS(SHMEM2_RD(bp, drv_flags), 1 << DRV_FLAGS_DCB_MFW_CONFIGURED); + if (bp->dcbx_port_params.pfc.enabled && (!(bp->dcbx_error & DCBX_REMOTE_MIB_ERROR) || mfw_configured)) /* @@ -558,6 +559,7 @@ static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp) int mfw_configured = SHMEM2_HAS(bp, drv_flags) && GET_FLAGS(SHMEM2_RD(bp, drv_flags), 1 << DRV_FLAGS_DCB_MFW_CONFIGURED); + bnx2x_ets_disabled(&bp->link_params, &bp->link_vars); if (!bp->dcbx_port_params.ets.enabled || @@ -1904,11 +1906,13 @@ static u8 bnx2x_dcbnl_set_state(struct net_device *netdev, u8 state) struct bnx2x *bp = netdev_priv(netdev); DP(BNX2X_MSG_DCB, "state = %s\n", state ? "on" : "off"); + /* Fail to set state to "enabled" if dcbx is disabled in nvram */ if (state && ((bp->dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) || (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_INVALID))) { DP(BNX2X_MSG_DCB, "Can not set dcbx to enabled while it is disabled in nvm\n"); return 1; } + bnx2x_dcbx_set_state(bp, (state ? true : false), bp->dcbx_enabled); return 0; } @@ -2052,7 +2056,6 @@ static void bnx2x_dcbnl_set_pfc_cfg(struct net_device *netdev, int prio, if (!bnx2x_dcbnl_set_valid(bp) || prio >= MAX_PFC_PRIORITIES) return; - if (setting) { bp->dcbx_config_params.admin_pfc_bitmap |= (1 << prio); bp->dcbx_config_params.admin_pfc_tx_enable = 1; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 6292aa1..8bdd857 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -234,7 +234,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) if ((bp->state == BNX2X_STATE_OPEN) && bp->link_vars.link_up && !(bp->flags & MF_FUNC_DIS)) { - cmd->duplex = bp->link_vars.duplex; + cmd->duplex = bp->link_vars.duplex; if (IS_MF(bp) && !BP_NOMCP(bp)) ethtool_cmd_speed_set(cmd, bnx2x_get_mf_speed(bp)); @@ -400,7 +400,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n"); return -EINVAL; } - /* Save new config in case command complete successully */ + /* Save new config in case command complete successfully */ new_multi_phy_config = bp->link_params.multi_phy_config; /* Get the new cfg_idx */ cfg_idx = bnx2x_get_link_cfg_idx(bp); @@ -751,11 +751,10 @@ static bool bnx2x_is_wreg_in_chip(struct bnx2x *bp, * @bp device handle * @p output buffer * - * Reads "paged" memories: memories that may only be read by - * first writing to a specific address ("write address") and - * then reading from a specific address ("read address"). There - * may be more than one write address per "page" and more than - * one read address per write address. + * Reads "paged" memories: memories that may only be read by first writing to a + * specific address ("write address") and then reading from a specific address + * ("read address"). There may be more than one write address per "page" and + * more than one read address per write address. */ static void bnx2x_read_pages_regs(struct bnx2x *bp, u32 *p, u32 preset) { @@ -1082,13 +1081,13 @@ static int bnx2x_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct bnx2x *bp = netdev_priv(dev); if (wol->wolopts & ~WAKE_MAGIC) { - DP(BNX2X_MSG_ETHTOOL, "WOL not supproted\n"); + DP(BNX2X_MSG_ETHTOOL, "WOL not supported\n"); return -EINVAL; } if (wol->wolopts & WAKE_MAGIC) { if (bp->flags & NO_WOL_FLAG) { - DP(BNX2X_MSG_ETHTOOL, "WOL not supproted\n"); + DP(BNX2X_MSG_ETHTOOL, "WOL not supported\n"); return -EINVAL; } bp->wol = 1; @@ -1161,7 +1160,7 @@ static int bnx2x_get_eeprom_len(struct net_device *dev) * Pf B takes the lock and proceeds to perform it's own access. * pf A unlocks the per port lock, while pf B is still working (!). * mcp takes the per port lock and corrupts pf B's access (and/or has it's own - * acess corrupted by pf B).* + * access corrupted by pf B) */ static int bnx2x_acquire_nvram_lock(struct bnx2x *bp) { @@ -1970,7 +1969,6 @@ static int bnx2x_set_eee(struct net_device *dev, struct ethtool_eee *edata) return 0; } - enum { BNX2X_CHIP_E1_OFST = 0, BNX2X_CHIP_E1H_OFST, @@ -2621,6 +2619,7 @@ static void bnx2x_self_test(struct net_device *dev, etest->flags |= ETH_TEST_FL_FAILED; return; } + DP(BNX2X_MSG_ETHTOOL, "Self-test command parameters: offline = %d, external_lb = %d\n", (etest->flags & ETH_TEST_FL_OFFLINE), @@ -2976,15 +2975,14 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); return -EINVAL; - } else { - return 0; } + return 0; case UDP_V4_FLOW: case UDP_V6_FLOW: /* For UDP either 2-tupple hash or 4-tupple hash is supported */ if (info->data == (RXH_IP_SRC | RXH_IP_DST | - RXH_L4_B_0_1 | RXH_L4_B_2_3)) + RXH_L4_B_0_1 | RXH_L4_B_2_3)) udp_rss_requested = 1; else if (info->data == (RXH_IP_SRC | RXH_IP_DST)) udp_rss_requested = 0; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h index 2959f2a..e5f8083 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -305,12 +305,10 @@ #define MAX_VLAN_CREDIT_E1H 0 /* Per Chip */ #define MAX_VLAN_CREDIT_E2 272 /* Per Path */ - /* Maximal aggregation queues supported */ #define ETH_MAX_AGGREGATION_QUEUES_E1 32 #define ETH_MAX_AGGREGATION_QUEUES_E1H_E2 64 - #define ETH_NUM_OF_MCAST_BINS 256 #define ETH_NUM_OF_MCAST_ENGINES_E2 72 @@ -353,7 +351,6 @@ /* max number of slow path commands per port */ #define MAX_RAMRODS_PER_PORT 8 - /**** DEFINES FOR TIMERS/CLOCKS RESOLUTIONS ****/ #define TIMERS_TICK_SIZE_CHIP (1e-3) @@ -380,7 +377,6 @@ that is not mapped to priority*/ #define LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED 0xFF - #define C_ERES_PER_PAGE \ (PAGE_SIZE / BITS_TO_BYTES(STRUCT_SIZE(event_ring_elem))) #define C_ERE_PER_PAGE_MASK (C_ERES_PER_PAGE - 1) @@ -391,8 +387,6 @@ #define INVALID_VNIC_ID 0xFF - #define UNDEF_IRO 0x80000000 - #endif /* BNX2X_FW_DEFS_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index af7af08..502cea1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -782,12 +782,16 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); printk("%s", lvl); + + /* dump buffer after the mark */ for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, offset + 4*word)); data[8] = 0x0; pr_cont("%s", (char *)data); } + + /* dump buffer before the mark */ for (offset = addr + 4; offset <= mark; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, offset + 4*word)); @@ -1683,11 +1687,11 @@ static int bnx2x_get_leader_lock_resource(struct bnx2x *bp) } /** - * bnx2x_trylock_leader_lock- try to aquire a leader lock. + * bnx2x_trylock_leader_lock- try to acquire a leader lock. * * @bp: driver handle * - * Tries to aquire a leader lock for current engine. + * Tries to acquire a leader lock for current engine. */ static bool bnx2x_trylock_leader_lock(struct bnx2x *bp) { @@ -1804,7 +1808,7 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) * mark pending ACK to MCP bit. * prevent case that both bits are cleared. * At the end of load/unload driver checks that - * sp_state is cleaerd, and this order prevents + * sp_state is cleared, and this order prevents * races */ smp_mb__before_clear_bit(); @@ -3083,7 +3087,7 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, /* Maximum number or simultaneous TPA aggregation for this Queue. * - * For PF Clients it should be the maximum avaliable number. + * For PF Clients it should be the maximum available number. * VF driver(s) may want to define it to a smaller value. */ rxq_init->max_tpa_queues = MAX_AGG_QS(bp); @@ -3796,7 +3800,7 @@ static void bnx2x_fan_failure(struct bnx2x *bp) "Please contact OEM Support for assistance\n"); /* - * Scheudle device reset (unload) + * Schedule device reset (unload) * This is due to some boards consuming sufficient power when driver is * up to overheat if fan fails. */ @@ -4894,7 +4898,7 @@ static void bnx2x_after_function_update(struct bnx2x *bp) struct bnx2x_queue_update_params *q_update_params = &queue_params.params.update; - /* Send Q update command with afex vlan removal values for all Qs */ + /* Send Q update command with afex vlan removal values for all Qs */ queue_params.cmd = BNX2X_Q_CMD_UPDATE; /* set silent vlan removal values according to vlan mode */ @@ -4996,7 +5000,6 @@ static void bnx2x_eq_int(struct bnx2x *bp) for (; sw_cons != hw_cons; sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) { - elem = &bp->eq_ring[EQ_DESC(sw_cons)]; rc = bnx2x_iov_eq_sp_event(bp, elem); @@ -6480,7 +6483,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp)); /* - * take the UNDI lock to protect undi_unload flow from accessing + * take the RESET lock to protect undi_unload flow from accessing * registers while we're resetting the chip */ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); @@ -6610,7 +6613,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) * queues with "old" ILT addresses. * c. PF enable in the PGLC. * d. Clear the was_error of the PF in the PGLC. (could have - * occured while driver was down) + * occurred while driver was down) * e. PF enable in the CFC (WEAK + STRONG) * f. Timers scan enable * 3. PF driver unload flow: @@ -6651,7 +6654,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) /* Step 1: set zeroes to all ilt page entries with valid bit on * Step 2: set the timers first/last ilt entry to point * to the entire range to prevent ILT range error for 3rd/4th - * vnic (this code assumes existance of the vnic) + * vnic (this code assumes existence of the vnic) * * both steps performed by call to bnx2x_ilt_client_init_op() * with dummy TM client @@ -6668,7 +6671,6 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1); } - REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); @@ -7151,7 +7153,6 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) } } - /* If SPIO5 is set to generate interrupts, enable it for this port */ val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); if (val & MISC_SPIO_SPIO5) { @@ -8335,8 +8336,8 @@ static void bnx2x_reset_func(struct bnx2x *bp) /* SP SB */ REG_WR8(bp, BAR_CSTRORM_INTMEM + - CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), - SB_DISABLED); + CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), + SB_DISABLED); for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), @@ -9078,8 +9079,7 @@ static int bnx2x_process_kill(struct bnx2x *bp, bool global) int cnt = 1000; u32 val = 0; u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2; - u32 tags_63_32 = 0; - + u32 tags_63_32 = 0; /* Empty the Tetris buffer, wait for 1s */ do { @@ -9974,7 +9974,6 @@ static int bnx2x_prev_unload(struct bnx2x *bp) REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0); } - do { /* Lock MCP using an unload request */ fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0); @@ -10694,21 +10693,21 @@ static void bnx2x_get_fcoe_info(struct bnx2x *bp) /* Port info */ bp->cnic_eth_dev.fcoe_wwn_port_name_hi = SHMEM_RD(bp, - dev_info.port_hw_config[port]. + dev_info.port_hw_config[port]. fcoe_wwn_port_name_upper); bp->cnic_eth_dev.fcoe_wwn_port_name_lo = SHMEM_RD(bp, - dev_info.port_hw_config[port]. + dev_info.port_hw_config[port]. fcoe_wwn_port_name_lower); /* Node info */ bp->cnic_eth_dev.fcoe_wwn_node_name_hi = SHMEM_RD(bp, - dev_info.port_hw_config[port]. + dev_info.port_hw_config[port]. fcoe_wwn_node_name_upper); bp->cnic_eth_dev.fcoe_wwn_node_name_lo = SHMEM_RD(bp, - dev_info.port_hw_config[port]. + dev_info.port_hw_config[port]. fcoe_wwn_node_name_lower); } else if (!IS_MF_SD(bp)) { /* @@ -11611,7 +11610,6 @@ static int bnx2x_set_mc_list(struct bnx2x *bp) return rc; } - /* If bp->state is OPEN, should be called with netif_addr_lock_bh() */ void bnx2x_set_rx_mode(struct net_device *dev) { @@ -11899,13 +11897,14 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, * support Physical Device Assignment where kernel BDF maybe arbitrary * (depending on hypervisor). */ - if (chip_is_e1x) + if (chip_is_e1x) { bp->pf_num = PCI_FUNC(pdev->devfn); - else {/* chip is E2/3*/ + } else { + /* chip is E2/3*/ pci_read_config_dword(bp->pdev, PCICFG_ME_REGISTER, &pci_cfg_dword); bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >> - ME_REG_ABS_PF_NUM_SHIFT); + ME_REG_ABS_PF_NUM_SHIFT); } BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num); @@ -12426,7 +12425,7 @@ static int bnx2x_init_one(struct pci_dev *pdev, BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", - tx_count, rx_count); + tx_count, rx_count); rc = bnx2x_init_bp(bp); if (rc) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 8e8c91a..0c08abe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -1442,7 +1442,7 @@ static int bnx2x_complete_vlan_mac(struct bnx2x *bp, if (cqe->message.error) return -EINVAL; - /* Run the next bulk of pending commands if requeted */ + /* Run the next bulk of pending commands if requested */ if (test_bit(RAMROD_CONT, ramrod_flags)) { rc = bnx2x_exe_queue_step(bp, &o->exe_queue, ramrod_flags); if (rc < 0) @@ -2103,7 +2103,7 @@ static inline void __storm_memset_mac_filters(struct bnx2x *bp, static int bnx2x_set_rx_mode_e1x(struct bnx2x *bp, struct bnx2x_rx_mode_ramrod_params *p) { - /* update the bp MAC filter structure */ + /* update the bp MAC filter structure */ u32 mask = (1 << p->cl_id); struct tstorm_eth_mac_filter_config *mac_filters = @@ -2166,7 +2166,7 @@ static int bnx2x_set_rx_mode_e1x(struct bnx2x *bp, mac_filters->unmatched_unicast & ~mask; DP(BNX2X_MSG_SP, "drop_ucast 0x%x\ndrop_mcast 0x%x\n accp_ucast 0x%x\n" - "accp_mcast 0x%x\naccp_bcast 0x%x\n", + "accp_mcast 0x%x\naccp_bcast 0x%x\n", mac_filters->ucast_drop_all, mac_filters->mcast_drop_all, mac_filters->ucast_accept_all, mac_filters->mcast_accept_all, mac_filters->bcast_accept_all); @@ -2790,7 +2790,7 @@ static inline void bnx2x_mcast_hdl_add(struct bnx2x *bp, cnt++; DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", - mlist_pos->mac); + mlist_pos->mac); } *line_idx = cnt; @@ -3085,7 +3085,7 @@ static inline void bnx2x_mcast_hdl_add_e1h(struct bnx2x *bp, BNX2X_57711_SET_MC_FILTER(mc_filter, bit); DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC, bin %d\n", - mlist_pos->mac, bit); + mlist_pos->mac, bit); /* bookkeeping... */ BIT_VEC64_SET_BIT(o->registry.aprox_match.vec, @@ -3319,7 +3319,7 @@ static inline int bnx2x_mcast_handle_restore_cmd_e1( i++; DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", - cfg_data.mac); + cfg_data.mac); } *rdata_idx = i; @@ -3355,7 +3355,7 @@ static inline int bnx2x_mcast_handle_pending_cmds_e1( cnt++; DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", - pmac_pos->mac); + pmac_pos->mac); } break; @@ -5652,9 +5652,9 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp, memset(rdata, 0, sizeof(*rdata)); /* Fill the ramrod data with provided parameters */ - rdata->function_mode = (u8)start_params->mf_mode; - rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag); - rdata->path_id = BP_PATH(bp); + rdata->function_mode = (u8)start_params->mf_mode; + rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag); + rdata->path_id = BP_PATH(bp); rdata->network_cos_mode = start_params->network_cos_mode; /* diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index 0beac4b..ff8887c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -54,7 +54,7 @@ typedef enum { BNX2X_OBJ_TYPE_RX_TX, } bnx2x_obj_type; -/* Filtering states */ +/* Public slow path states */ enum { BNX2X_FILTER_MAC_PENDING, BNX2X_FILTER_VLAN_PENDING, -- cgit v0.10.2 From 924d75ab3da25c3498b329158f7226fb80cd8cec Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:44 +0000 Subject: bnx2x: reorganization and beautification Slightly changes the bnx2x code without `true' functional changes. Changes include: 1. Gathering macros into a single macro when combination is used multiple times. 2. Exporting parts of functions into their own functions. 3. Return values after if-else instead of only on the else condition (where current flow would simply return same value later in the code) 4. Removing some unnecessary code (either dead-code or incorrect conditions) Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 96a60f0..e8f2700 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -417,8 +417,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, tpa_info->rxhash = bnx2x_get_rxhash(bp, cqe, &tpa_info->l4_rxhash); if (fp->mode == TPA_MODE_GRO) { u16 gro_size = le16_to_cpu(cqe->pkt_len_or_gro_seg_len); - tpa_info->full_page = - SGE_PAGE_SIZE * PAGES_PER_SGE / gro_size * gro_size; + tpa_info->full_page = SGE_PAGES / gro_size * gro_size; tpa_info->gro_size = gro_size; } @@ -499,7 +498,7 @@ static int bnx2x_alloc_rx_sge(struct bnx2x *bp, } mapping = dma_map_page(&bp->pdev->dev, page, 0, - SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE); + SGE_PAGES, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { __free_pages(page, PAGES_PER_SGE_SHIFT); BNX2X_ERR("Can't map sge\n"); @@ -541,7 +540,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, le16_to_cpu(cqe->pkt_len)); #ifdef BNX2X_STOP_ON_ERROR - if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) { + if (pages > min_t(u32, 8, MAX_SKB_FRAGS) * SGE_PAGES) { BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n", pages, cqe_idx); BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len); @@ -559,8 +558,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, if (fp->mode == TPA_MODE_GRO) frag_len = min_t(u32, frag_size, (u32)full_page); else /* LRO */ - frag_len = min_t(u32, frag_size, - (u32)(SGE_PAGE_SIZE * PAGES_PER_SGE)); + frag_len = min_t(u32, frag_size, (u32)SGE_PAGES); rx_pg = &fp->rx_page_ring[sge_idx]; old_rx_pg = *rx_pg; @@ -576,7 +574,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, /* Unmap the page as we r going to pass it to the stack */ dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(&old_rx_pg, mapping), - SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE); + SGE_PAGES, DMA_FROM_DEVICE); /* Add one frag and update the appropriate fields in the skb */ if (fp->mode == TPA_MODE_LRO) skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len); @@ -594,7 +592,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, } skb->data_len += frag_len; - skb->truesize += SGE_PAGE_SIZE * PAGES_PER_SGE; + skb->truesize += SGE_PAGES; skb->len += frag_len; frag_size -= frag_len; @@ -2500,12 +2498,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; - /* Set the initial link reported state to link down */ - bnx2x_acquire_phy_lock(bp); memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link)); __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, &bp->last_reported_link.link_report_flags); - bnx2x_release_phy_lock(bp); if (IS_PF(bp)) /* must be called before memory allocation and HW init */ @@ -3346,12 +3341,11 @@ static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb, ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW; return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data; - } else - /* We support checksum offload for TCP and UDP only. - * No need to pass the UDP header length - it's a constant. - */ - return skb_transport_header(skb) + - sizeof(struct udphdr) - skb->data; + } + /* We support checksum offload for TCP and UDP only. + * No need to pass the UDP header length - it's a constant. + */ + return skb_transport_header(skb) + sizeof(struct udphdr) - skb->data; } static inline void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index d126c85..3e4f3fa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -403,7 +403,7 @@ void bnx2x_set_rx_mode(struct net_device *dev); * If bp->state is OPEN, should be called with * netif_addr_lock_bh(). */ -void bnx2x_set_storm_rx_mode(struct bnx2x *bp); +int bnx2x_set_storm_rx_mode(struct bnx2x *bp); /** * bnx2x_set_q_rx_mode - configures rx_mode for a single queue. @@ -415,11 +415,11 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp); * @tx_accept_flags: tx accept configuration (tx switch) * @ramrod_flags: ramrod configuration */ -void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, - unsigned long rx_mode_flags, - unsigned long rx_accept_flags, - unsigned long tx_accept_flags, - unsigned long ramrod_flags); +int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, + unsigned long rx_mode_flags, + unsigned long rx_accept_flags, + unsigned long tx_accept_flags, + unsigned long ramrod_flags); /* Parity errors related */ void bnx2x_set_pf_load(struct bnx2x *bp); @@ -821,7 +821,7 @@ static inline void bnx2x_free_rx_sge(struct bnx2x *bp, return; dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(sw_buf, mapping), - SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE); + SGE_PAGES, DMA_FROM_DEVICE); __free_pages(page, PAGES_PER_SGE_SHIFT); sw_buf->page = NULL; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 8bdd857..f949540 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -3002,9 +3002,9 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0); - } else { - return 0; } + return 0; + case IPV4_FLOW: case IPV6_FLOW: /* For IP only 2-tupple hash is supported */ @@ -3012,9 +3012,9 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); return -EINVAL; - } else { - return 0; } + return 0; + case SCTP_V4_FLOW: case AH_ESP_V4_FLOW: case AH_V4_FLOW: @@ -3030,9 +3030,9 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); return -EINVAL; - } else { - return 0; } + return 0; + default: return -EINVAL; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 502cea1..c8158ba 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -3034,15 +3034,12 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, pause->sge_th_hi + FW_PREFETCH_CNT > MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); - tpa_agg_size = min_t(u32, - (min_t(u32, 8, MAX_SKB_FRAGS) * - SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff); + tpa_agg_size = TPA_AGG_SIZE; max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT; max_sge = ((max_sge + PAGES_PER_SGE - 1) & (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; - sge_sz = (u16)min_t(u32, SGE_PAGE_SIZE * PAGES_PER_SGE, - 0xffff); + sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff); } /* pause - not for e1 */ @@ -5673,13 +5670,12 @@ static void bnx2x_init_eq_ring(struct bnx2x *bp) min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1); } - /* called with netif_addr_lock_bh() */ -void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, - unsigned long rx_mode_flags, - unsigned long rx_accept_flags, - unsigned long tx_accept_flags, - unsigned long ramrod_flags) +int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, + unsigned long rx_mode_flags, + unsigned long rx_accept_flags, + unsigned long tx_accept_flags, + unsigned long ramrod_flags) { struct bnx2x_rx_mode_ramrod_params ramrod_param; int rc; @@ -5709,22 +5705,21 @@ void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, rc = bnx2x_config_rx_mode(bp, &ramrod_param); if (rc < 0) { BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode); - return; + return rc; } + + return 0; } -/* called with netif_addr_lock_bh() */ -void bnx2x_set_storm_rx_mode(struct bnx2x *bp) +int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, + unsigned long *rx_accept_flags, + unsigned long *tx_accept_flags) { - unsigned long rx_mode_flags = 0, ramrod_flags = 0; - unsigned long rx_accept_flags = 0, tx_accept_flags = 0; - - if (!NO_FCOE(bp)) - - /* Configure rx_mode of FCoE Queue */ - __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); + /* Clear the flags first */ + *rx_accept_flags = 0; + *tx_accept_flags = 0; - switch (bp->rx_mode) { + switch (rx_mode) { case BNX2X_RX_MODE_NONE: /* * 'drop all' supersedes any accept flags that may have been @@ -5732,25 +5727,25 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp) */ break; case BNX2X_RX_MODE_NORMAL: - __set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_MULTICAST, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); /* internal switching mode */ - __set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags); - __set_bit(BNX2X_ACCEPT_MULTICAST, &tx_accept_flags); - __set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); break; case BNX2X_RX_MODE_ALLMULTI: - __set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); /* internal switching mode */ - __set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags); - __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags); - __set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); break; case BNX2X_RX_MODE_PROMISC: @@ -5758,36 +5753,57 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp) * should receive matched and unmatched (in resolution of port) * unicast packets. */ - __set_bit(BNX2X_ACCEPT_UNMATCHED, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); /* internal switching mode */ - __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags); - __set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); if (IS_MF_SI(bp)) - __set_bit(BNX2X_ACCEPT_ALL_UNICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags); else - __set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); break; default: - BNX2X_ERR("Unknown rx_mode: %d\n", bp->rx_mode); - return; + BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode); + return -EINVAL; } + /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */ if (bp->rx_mode != BNX2X_RX_MODE_NONE) { - __set_bit(BNX2X_ACCEPT_ANY_VLAN, &rx_accept_flags); - __set_bit(BNX2X_ACCEPT_ANY_VLAN, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); } + return 0; +} + +/* called with netif_addr_lock_bh() */ +int bnx2x_set_storm_rx_mode(struct bnx2x *bp) +{ + unsigned long rx_mode_flags = 0, ramrod_flags = 0; + unsigned long rx_accept_flags = 0, tx_accept_flags = 0; + int rc; + + if (!NO_FCOE(bp)) + /* Configure rx_mode of FCoE Queue */ + __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); + + rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags, + &tx_accept_flags); + if (rc) + return rc; + __set_bit(RAMROD_RX, &ramrod_flags); __set_bit(RAMROD_TX, &ramrod_flags); - bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, rx_accept_flags, - tx_accept_flags, ramrod_flags); + return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, + rx_accept_flags, tx_accept_flags, + ramrod_flags); } static void bnx2x_init_internal_common(struct bnx2x *bp) @@ -9539,36 +9555,6 @@ u32 bnx2x_get_pretend_reg(struct bnx2x *bp) return base + (BP_ABS_FUNC(bp)) * stride; } -static void bnx2x_undi_int_disable_e1h(struct bnx2x *bp) -{ - u32 reg = bnx2x_get_pretend_reg(bp); - - /* Flush all outstanding writes */ - mmiowb(); - - /* Pretend to be function 0 */ - REG_WR(bp, reg, 0); - REG_RD(bp, reg); /* Flush the GRC transaction (in the chip) */ - - /* From now we are in the "like-E1" mode */ - bnx2x_int_disable(bp); - - /* Flush all outstanding writes */ - mmiowb(); - - /* Restore the original function */ - REG_WR(bp, reg, BP_ABS_FUNC(bp)); - REG_RD(bp, reg); -} - -static inline void bnx2x_undi_int_disable(struct bnx2x *bp) -{ - if (CHIP_IS_E1(bp)) - bnx2x_int_disable(bp); - else - bnx2x_undi_int_disable_e1h(bp); -} - static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, struct bnx2x_mac_vals *vals) { @@ -9856,7 +9842,6 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* Check if the UNDI driver was previously loaded * UNDI driver initializes CID offset for normal bell to 0x7 */ - reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) { tmp_reg = REG_RD(bp, DORQ_REG_NORM_CID_OFST); if (tmp_reg == 0x7) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 0c08abe..c0e0359 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -2191,7 +2191,7 @@ static inline void bnx2x_rx_mode_set_rdata_hdr_e2(u32 cid, } static inline void bnx2x_rx_mode_set_cmd_state_e2(struct bnx2x *bp, - unsigned long accept_flags, + unsigned long *accept_flags, struct eth_filter_rules_cmd *cmd, bool clear_accept_all) { @@ -2201,33 +2201,33 @@ static inline void bnx2x_rx_mode_set_cmd_state_e2(struct bnx2x *bp, state = ETH_FILTER_RULES_CMD_UCAST_DROP_ALL | ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; - if (accept_flags) { - if (test_bit(BNX2X_ACCEPT_UNICAST, &accept_flags)) - state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; + if (test_bit(BNX2X_ACCEPT_UNICAST, accept_flags)) + state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; - if (test_bit(BNX2X_ACCEPT_MULTICAST, &accept_flags)) - state &= ~ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; + if (test_bit(BNX2X_ACCEPT_MULTICAST, accept_flags)) + state &= ~ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; - if (test_bit(BNX2X_ACCEPT_ALL_UNICAST, &accept_flags)) { - state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; - state |= ETH_FILTER_RULES_CMD_UCAST_ACCEPT_ALL; - } + if (test_bit(BNX2X_ACCEPT_ALL_UNICAST, accept_flags)) { + state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; + state |= ETH_FILTER_RULES_CMD_UCAST_ACCEPT_ALL; + } - if (test_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags)) { - state |= ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL; - state &= ~ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; - } - if (test_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags)) - state |= ETH_FILTER_RULES_CMD_BCAST_ACCEPT_ALL; + if (test_bit(BNX2X_ACCEPT_ALL_MULTICAST, accept_flags)) { + state |= ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL; + state &= ~ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; + } - if (test_bit(BNX2X_ACCEPT_UNMATCHED, &accept_flags)) { - state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; - state |= ETH_FILTER_RULES_CMD_UCAST_ACCEPT_UNMATCHED; - } - if (test_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags)) - state |= ETH_FILTER_RULES_CMD_ACCEPT_ANY_VLAN; + if (test_bit(BNX2X_ACCEPT_BROADCAST, accept_flags)) + state |= ETH_FILTER_RULES_CMD_BCAST_ACCEPT_ALL; + + if (test_bit(BNX2X_ACCEPT_UNMATCHED, accept_flags)) { + state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; + state |= ETH_FILTER_RULES_CMD_UCAST_ACCEPT_UNMATCHED; } + if (test_bit(BNX2X_ACCEPT_ANY_VLAN, accept_flags)) + state |= ETH_FILTER_RULES_CMD_ACCEPT_ANY_VLAN; + /* Clear ACCEPT_ALL_XXX flags for FCoE L2 Queue */ if (clear_accept_all) { state &= ~ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL; @@ -2260,8 +2260,9 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp, data->rules[rule_idx].cmd_general_data = ETH_FILTER_RULES_CMD_TX_CMD; - bnx2x_rx_mode_set_cmd_state_e2(bp, p->tx_accept_flags, - &(data->rules[rule_idx++]), false); + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->tx_accept_flags, + &(data->rules[rule_idx++]), + false); } /* Rx */ @@ -2272,8 +2273,9 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp, data->rules[rule_idx].cmd_general_data = ETH_FILTER_RULES_CMD_RX_CMD; - bnx2x_rx_mode_set_cmd_state_e2(bp, p->rx_accept_flags, - &(data->rules[rule_idx++]), false); + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->rx_accept_flags, + &(data->rules[rule_idx++]), + false); } @@ -2293,9 +2295,10 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp, data->rules[rule_idx].cmd_general_data = ETH_FILTER_RULES_CMD_TX_CMD; - bnx2x_rx_mode_set_cmd_state_e2(bp, p->tx_accept_flags, - &(data->rules[rule_idx++]), + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->tx_accept_flags, + &(data->rules[rule_idx]), true); + rule_idx++; } /* Rx */ @@ -2306,9 +2309,10 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp, data->rules[rule_idx].cmd_general_data = ETH_FILTER_RULES_CMD_RX_CMD; - bnx2x_rx_mode_set_cmd_state_e2(bp, p->rx_accept_flags, - &(data->rules[rule_idx++]), + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->rx_accept_flags, + &(data->rules[rule_idx]), true); + rule_idx++; } } -- cgit v0.10.2 From 0926d499e24d22da77f83cbfb3b22e1ad89aa7db Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:45 +0000 Subject: bnx2x: correct usleep_range usage Change the incorrect usage of `usleep_range(1000, 1000)' into `usleep_range(1000, 2000)'. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 3e4f3fa..9b6e27a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1224,7 +1224,7 @@ static inline int bnx2x_clean_tx_queue(struct bnx2x *bp, #endif } cnt--; - usleep_range(1000, 1000); + usleep_range(1000, 2000); } return 0; @@ -1259,7 +1259,7 @@ static inline bool bnx2x_wait_sp_comp(struct bnx2x *bp, unsigned long mask) } netif_addr_unlock_bh(bp->dev); - usleep_range(1000, 1000); + usleep_range(1000, 2000); } smp_mb(); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c8158ba..e496f19 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8654,7 +8654,7 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) } /* Give HW time to discard old tx messages */ - usleep_range(1000, 1000); + usleep_range(1000, 2000); /* Clean all ETH MACs */ rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC, @@ -9078,7 +9078,7 @@ static int bnx2x_er_poll_igu_vq(struct bnx2x *bp) if (pend_bits == 0) break; - usleep_range(1000, 1000); + usleep_range(1000, 2000); } while (cnt-- > 0); if (cnt <= 0) { @@ -9113,7 +9113,7 @@ static int bnx2x_process_kill(struct bnx2x *bp, bool global) (pgl_exp_rom2 == 0xffffffff) && (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff))) break; - usleep_range(1000, 1000); + usleep_range(1000, 2000); } while (cnt-- > 0); if (cnt <= 0) { @@ -9146,7 +9146,7 @@ static int bnx2x_process_kill(struct bnx2x *bp, bool global) /* Wait for 1ms to empty GLUE and PCI-E core queues, * PSWHST, GRC and PSWRD Tetris buffer. */ - usleep_range(1000, 1000); + usleep_range(1000, 2000); /* Prepare to chip reset: */ /* MCP */ @@ -10917,7 +10917,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp) while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) { tout--; - usleep_range(1000, 1000); + usleep_range(1000, 2000); } if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index c0e0359..4a28601 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -325,7 +325,7 @@ static inline int bnx2x_state_wait(struct bnx2x *bp, int state, return 0; } - usleep_range(1000, 1000); + usleep_range(1000, 2000); if (bp->panic) return -EIO; @@ -1407,7 +1407,7 @@ static int bnx2x_wait_vlan_mac(struct bnx2x *bp, /* Wait until there are no pending commands */ if (!bnx2x_exe_queue_empty(exeq)) - usleep_range(1000, 1000); + usleep_range(1000, 2000); else return 0; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 18c2e61..1069669 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -212,7 +212,7 @@ static int bnx2x_stats_comp(struct bnx2x *bp) break; } cnt--; - usleep_range(1000, 1000); + usleep_range(1000, 2000); } return 1; } -- cgit v0.10.2 From 04c467366553680283f953887214854f9b30a59a Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:46 +0000 Subject: bnx2x: Add additional debug information Add/Revise several debug prints in the bnx2x driver - on regular flows as well as error flows. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e8f2700..58f491e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3486,9 +3486,10 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) } DP(NETIF_MSG_TX_QUEUED, - "queue[%d]: SKB: summed %x protocol %x protocol(%x,%x) gso type %x xmit_type %x\n", + "queue[%d]: SKB: summed %x protocol %x protocol(%x,%x) gso type %x xmit_type %x len %d\n", txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, - ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); + ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type, + skb->len); eth = (struct ethhdr *)skb->data; @@ -4078,6 +4079,8 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) } else /* if rx_ring_size specified - use it */ rx_ring_size = bp->rx_ring_size; + DP(BNX2X_MSG_SP, "calculated rx_ring_size %d\n", rx_ring_size); + /* Common */ sb = &bnx2x_fp(bp, index, status_blk); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index f949540..9a674b1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1731,6 +1731,10 @@ static int bnx2x_set_ringparam(struct net_device *dev, { struct bnx2x *bp = netdev_priv(dev); + DP(BNX2X_MSG_ETHTOOL, + "set ring params command parameters: rx_pending = %d, tx_pending = %d\n", + ering->rx_pending, ering->tx_pending); + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { DP(BNX2X_MSG_ETHTOOL, "Handling parity error recovery. Try again later\n"); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e496f19..c9effad 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1027,6 +1027,17 @@ void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int) } #ifdef BNX2X_STOP_ON_ERROR + + /* event queue */ + for (i = 0; i < NUM_EQ_DESC; i++) { + u32 *data = (u32 *)&bp->eq_ring[i].message.data; + + BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n", + i, bp->eq_ring[i].message.opcode, + bp->eq_ring[i].message.error); + BNX2X_ERR("data: %x %x %x\n", data[0], data[1], data[2]); + } + /* Rings */ /* Rx */ for_each_valid_rx_queue(bp, i) { @@ -7395,8 +7406,10 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) /* FLR cleanup - hmmm */ if (!CHIP_IS_E1x(bp)) { rc = bnx2x_pf_flr_clnup(bp); - if (rc) + if (rc) { + bnx2x_fw_dump(bp); return rc; + } } /* set MSI reconfigure capability */ @@ -9782,6 +9795,8 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) if (bnx2x_prev_is_path_marked(bp)) return bnx2x_prev_mcp_done(bp); + BNX2X_DEV_INFO("Path is unmarked\n"); + /* If function has FLR capabilities, and existing FW version matches * the one required, then FLR will be sufficient to clean any residue * left by previous driver @@ -9917,7 +9932,8 @@ static void bnx2x_prev_interrupted_dmae(struct bnx2x *bp) if (!CHIP_IS_E1x(bp)) { u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { - BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); + DP(BNX2X_MSG_SP, + "'was error' bit was found to be set in pglueb upon startup. Clearing\n"); REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp)); } @@ -12488,6 +12504,7 @@ static int bnx2x_init_one(struct pci_dev *pdev, dev_err(&pdev->dev, "Cannot set interrupts\n"); goto init_one_exit; } + BNX2X_DEV_INFO("set interrupts successfully\n"); /* register the net device */ rc = register_netdev(dev); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 4a28601..7d6d601 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -4241,11 +4241,16 @@ int bnx2x_queue_state_change(struct bnx2x *bp, unsigned long *pending = &o->pending; /* Check that the requested transition is legal */ - if (o->check_transition(bp, o, params)) + rc = o->check_transition(bp, o, params); + if (rc) { + BNX2X_ERR("check transition returned an error. rc %d\n", rc); return -EINVAL; + } /* Set "pending" bit */ + DP(BNX2X_MSG_SP, "pending bit was=%lx\n", o->pending); pending_bit = o->set_pending(o, params); + DP(BNX2X_MSG_SP, "pending bit now=%lx\n", o->pending); /* Don't send a command if only driver cleanup was requested */ if (test_bit(RAMROD_DRV_CLR_ONLY, ¶ms->ramrod_flags)) @@ -5029,8 +5034,11 @@ static int bnx2x_queue_chk_transition(struct bnx2x *bp, * Don't allow a next state transition if we are in the middle of * the previous one. */ - if (o->pending) + if (o->pending) { + BNX2X_ERR("Blocking transition since pending was %lx\n", + o->pending); return -EBUSY; + } switch (state) { case BNX2X_Q_STATE_RESET: -- cgit v0.10.2 From 6ab20355c0c4a4e067ebfed157c0b93c21e2f02c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:47 +0000 Subject: bnx2x: Add missing VFs reference in macros Add missing 57712_VF and 57800_VF to CHIP_IS_E2 and CHIP_IS_E3 macros (missing from commit 8395be5). Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 9e8c37d..0532e43 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -843,9 +843,11 @@ struct bnx2x_common { #define CHIP_IS_E1H(bp) (CHIP_IS_57711(bp) || \ CHIP_IS_57711E(bp)) #define CHIP_IS_E2(bp) (CHIP_IS_57712(bp) || \ - CHIP_IS_57712_MF(bp)) + CHIP_IS_57712_MF(bp) || \ + CHIP_IS_57712_VF(bp)) #define CHIP_IS_E3(bp) (CHIP_IS_57800(bp) || \ CHIP_IS_57800_MF(bp) || \ + CHIP_IS_57800_VF(bp) || \ CHIP_IS_57810(bp) || \ CHIP_IS_57810_MF(bp) || \ CHIP_IS_57810_VF(bp) || \ -- cgit v0.10.2 From c3146eb676e7cce254e98b1d179a4c82227a9d26 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 23 Jan 2013 03:21:48 +0000 Subject: bnx2x: Correct memory preparation and release Since commit 15192a8cf there have been a memory leak upon rmmod of the bnx2x driver. This corrects the memory leak and corrects the zeroing of internal memories upon driver load. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 0532e43..55ae8f9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1702,6 +1702,8 @@ struct bnx2x { /* priority to cos mapping */ u8 prio_to_cos[8]; + + int fp_array_size; u32 dump_preset_idx; }; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 58f491e..bcb2b64 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2308,49 +2308,15 @@ static void bnx2x_nic_load_afex_dcc(struct bnx2x *bp, int load_code) static void bnx2x_bz_fp(struct bnx2x *bp, int index) { struct bnx2x_fastpath *fp = &bp->fp[index]; - struct bnx2x_fp_stats *fp_stats = &bp->fp_stats[index]; int cos; struct napi_struct orig_napi = fp->napi; struct bnx2x_agg_info *orig_tpa_info = fp->tpa_info; /* bzero bnx2x_fastpath contents */ - if (bp->stats_init) { - memset(fp->tpa_info, 0, sizeof(*fp->tpa_info)); - memset(fp, 0, sizeof(*fp)); - } else { - /* Keep Queue statistics */ - struct bnx2x_eth_q_stats *tmp_eth_q_stats; - struct bnx2x_eth_q_stats_old *tmp_eth_q_stats_old; - - tmp_eth_q_stats = kzalloc(sizeof(struct bnx2x_eth_q_stats), - GFP_KERNEL); - if (tmp_eth_q_stats) - memcpy(tmp_eth_q_stats, &fp_stats->eth_q_stats, - sizeof(struct bnx2x_eth_q_stats)); - - tmp_eth_q_stats_old = - kzalloc(sizeof(struct bnx2x_eth_q_stats_old), - GFP_KERNEL); - if (tmp_eth_q_stats_old) - memcpy(tmp_eth_q_stats_old, &fp_stats->eth_q_stats_old, - sizeof(struct bnx2x_eth_q_stats_old)); - - memset(fp->tpa_info, 0, sizeof(*fp->tpa_info)); - memset(fp, 0, sizeof(*fp)); - - if (tmp_eth_q_stats) { - memcpy(&fp_stats->eth_q_stats, tmp_eth_q_stats, - sizeof(struct bnx2x_eth_q_stats)); - kfree(tmp_eth_q_stats); - } - - if (tmp_eth_q_stats_old) { - memcpy(&fp_stats->eth_q_stats_old, tmp_eth_q_stats_old, - sizeof(struct bnx2x_eth_q_stats_old)); - kfree(tmp_eth_q_stats_old); - } - - } + if (fp->tpa_info) + memset(fp->tpa_info, 0, ETH_MAX_AGGREGATION_QUEUES_E1H_E2 * + sizeof(struct bnx2x_agg_info)); + memset(fp, 0, sizeof(*fp)); /* Restore the NAPI object as it has been already initialized */ fp->napi = orig_napi; @@ -4227,7 +4193,10 @@ int bnx2x_alloc_fp_mem(struct bnx2x *bp) void bnx2x_free_mem_bp(struct bnx2x *bp) { - kfree(bp->fp->tpa_info); + int i; + + for (i = 0; i < bp->fp_array_size; i++) + kfree(bp->fp[i].tpa_info); kfree(bp->fp); kfree(bp->sp_objs); kfree(bp->fp_stats); @@ -4256,12 +4225,13 @@ int bnx2x_alloc_mem_bp(struct bnx2x *bp) /* fp array: RSS plus CNIC related L2 queues */ fp_array_size = BNX2X_MAX_RSS_COUNT(bp) + CNIC_SUPPORT(bp); - BNX2X_DEV_INFO("fp_array_size %d", fp_array_size); + bp->fp_array_size = fp_array_size; + BNX2X_DEV_INFO("fp_array_size %d\n", bp->fp_array_size); - fp = kcalloc(fp_array_size, sizeof(*fp), GFP_KERNEL); + fp = kcalloc(bp->fp_array_size, sizeof(*fp), GFP_KERNEL); if (!fp) goto alloc_err; - for (i = 0; i < fp_array_size; i++) { + for (i = 0; i < bp->fp_array_size; i++) { fp[i].tpa_info = kcalloc(ETH_MAX_AGGREGATION_QUEUES_E1H_E2, sizeof(struct bnx2x_agg_info), GFP_KERNEL); @@ -4272,13 +4242,13 @@ int bnx2x_alloc_mem_bp(struct bnx2x *bp) bp->fp = fp; /* allocate sp objs */ - bp->sp_objs = kcalloc(fp_array_size, sizeof(struct bnx2x_sp_objs), + bp->sp_objs = kcalloc(bp->fp_array_size, sizeof(struct bnx2x_sp_objs), GFP_KERNEL); if (!bp->sp_objs) goto alloc_err; /* allocate fp_stats */ - bp->fp_stats = kcalloc(fp_array_size, sizeof(struct bnx2x_fp_stats), + bp->fp_stats = kcalloc(bp->fp_array_size, sizeof(struct bnx2x_fp_stats), GFP_KERNEL); if (!bp->fp_stats) goto alloc_err; -- cgit v0.10.2 From 80bfe5cc1b8c320247a21ff40d8c139c5f3bbcaf Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:49 +0000 Subject: bnx2x: Modify unload conditions Don't unload the bnx2x driver if its in a recovery process, or if the previous load have failed. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index bcb2b64..a461138 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2805,7 +2805,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); } - if (IS_PF(bp) && + if (IS_PF(bp) && bp->recovery_state != BNX2X_RECOVERY_DONE && (bp->state == BNX2X_STATE_CLOSED || bp->state == BNX2X_STATE_ERROR)) { /* We can get here if the driver has been unloaded @@ -2825,8 +2825,16 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) return -EINVAL; } - /* - * It's important to set the bp->state to the value different from + /* Nothing to do during unload if previous bnx2x_nic_load() + * have not completed succesfully - all resourses are released. + * + * we can get here only after unsuccessful ndo_* callback, during which + * dev->IFF_UP flag is still on. + */ + if (bp->state == BNX2X_STATE_CLOSED || bp->state == BNX2X_STATE_ERROR) + return 0; + + /* It's important to set the bp->state to the value different from * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int() * may restart the Tx from the NAPI context (see bnx2x_tx_int()). */ -- cgit v0.10.2 From 86564c3f0fe7ff3ffe452fcc54a774eeadc1cf45 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:50 +0000 Subject: bnx2x: Remove many sparse warnings Remove most of the sparse warnings in the bnx2x compilation (i.e., thus resulting when compiling with `C=2 CF=-D__CHECK_ENDIAN__'). Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a461138..ecac04a3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3128,17 +3128,21 @@ static noinline u16 bnx2x_tx_split(struct bnx2x *bp, return bd_prod; } -static inline u16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix) +#define bswab32(b32) ((__force __le32) swab32((__force __u32) (b32))) +#define bswab16(b16) ((__force __le16) swab16((__force __u16) (b16))) +static inline __le16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix) { + __sum16 tsum = (__force __sum16) csum; + if (fix > 0) - csum = (u16) ~csum_fold(csum_sub(csum, - csum_partial(t_header - fix, fix, 0))); + tsum = ~csum_fold(csum_sub((__force __wsum) csum, + csum_partial(t_header - fix, fix, 0))); else if (fix < 0) - csum = (u16) ~csum_fold(csum_add(csum, - csum_partial(t_header, -fix, 0))); + tsum = ~csum_fold(csum_add((__force __wsum) csum, + csum_partial(t_header, -fix, 0))); - return swab16(csum); + return bswab16(csum); } static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) @@ -3272,23 +3276,24 @@ static inline void bnx2x_set_pbd_gso(struct sk_buff *skb, u32 xmit_type) { pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size); - pbd->tcp_send_seq = swab32(tcp_hdr(skb)->seq); + pbd->tcp_send_seq = bswab32(tcp_hdr(skb)->seq); pbd->tcp_flags = pbd_tcp_flags(skb); if (xmit_type & XMIT_GSO_V4) { - pbd->ip_id = swab16(ip_hdr(skb)->id); + pbd->ip_id = bswab16(ip_hdr(skb)->id); pbd->tcp_pseudo_csum = - swab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr, - ip_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0)); + bswab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); } else pbd->tcp_pseudo_csum = - swab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0)); + bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); - pbd->global_data |= ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN; + pbd->global_data |= + cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN); } /** @@ -3354,8 +3359,9 @@ static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb, /* for now NS flag is not used in Linux */ pbd->global_data = - (hlen | ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) << - ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT)); + cpu_to_le16(hlen | + ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) << + ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT)); pbd->ip_hlen_w = (skb_transport_header(skb) - skb_network_header(skb)) >> 1; @@ -3372,7 +3378,7 @@ static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb, hlen = hlen*2; if (xmit_type & XMIT_CSUM_TCP) { - pbd->tcp_pseudo_csum = swab16(tcp_hdr(skb)->check); + pbd->tcp_pseudo_csum = bswab16(tcp_hdr(skb)->check); } else { s8 fix = SKB_CS_OFF(skb); /* signed! */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 9b6e27a..4635c02 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -983,8 +983,8 @@ static inline int bnx2x_func_start(struct bnx2x *bp) * @fw_lo: pointer to lower part * @mac: pointer to MAC address */ -static inline void bnx2x_set_fw_mac_addr(u16 *fw_hi, u16 *fw_mid, u16 *fw_lo, - u8 *mac) +static inline void bnx2x_set_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid, + __le16 *fw_lo, u8 *mac) { ((u8 *)fw_hi)[0] = mac[1]; ((u8 *)fw_hi)[1] = mac[0]; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 76e30c9..037860e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -3378,6 +3378,10 @@ struct regpair { __le32 hi; }; +struct regpair_native { + u32 lo; + u32 hi; +}; /* * Classify rule opcodes in E2/E3 @@ -4404,13 +4408,13 @@ struct tstorm_eth_function_common_config { * MAC filtering configuration parameters per port in Tstorm */ struct tstorm_eth_mac_filter_config { - __le32 ucast_drop_all; - __le32 ucast_accept_all; - __le32 mcast_drop_all; - __le32 mcast_accept_all; - __le32 bcast_accept_all; - __le32 vlan_filter[2]; - __le32 unmatched_unicast; + u32 ucast_drop_all; + u32 ucast_accept_all; + u32 mcast_drop_all; + u32 mcast_accept_all; + u32 bcast_accept_all; + u32 vlan_filter[2]; + u32 unmatched_unicast; }; @@ -4902,7 +4906,7 @@ union event_data { * per PF event ring data */ struct event_ring_data { - struct regpair base_addr; + struct regpair_native base_addr; #if defined(__BIG_ENDIAN) u8 index_id; u8 sb_id; @@ -5135,7 +5139,7 @@ struct pci_entity { * The fast-path status block meta-data, common to all chips */ struct hc_sb_data { - struct regpair host_sb_addr; + struct regpair_native host_sb_addr; struct hc_status_block_sm state_machine[HC_SB_MAX_SM]; struct pci_entity p_func; #if defined(__BIG_ENDIAN) @@ -5149,7 +5153,7 @@ struct hc_sb_data { u8 state; u8 rsrv0; #endif - struct regpair rsrv1[2]; + struct regpair_native rsrv1[2]; }; @@ -5167,7 +5171,7 @@ enum hc_segment { * The fast-path status block meta-data */ struct hc_sp_status_block_data { - struct regpair host_sb_addr; + struct regpair_native host_sb_addr; #if defined(__BIG_ENDIAN) u8 rsrv1; u8 state; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h index ae9b6ff..8ab0dd9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h @@ -218,7 +218,7 @@ static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr, u32 len, /* gunzip_outlen is in dwords */ len = GUNZIP_OUTLEN(bp); for (i = 0; i < len; i++) - ((u32 *)GUNZIP_BUF(bp))[i] = + ((u32 *)GUNZIP_BUF(bp))[i] = (__force u32) cpu_to_le32(((u32 *)GUNZIP_BUF(bp))[i]); bnx2x_write_big_buf_wb(bp, addr, len); @@ -232,7 +232,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage) u16 op_end = INIT_OPS_OFFSETS(bp)[BLOCK_OPS_IDX(block, stage, STAGE_END)]; - union init_op *op; + const union init_op *op; u32 op_idx, op_type, addr, len; const u32 *data, *data_base; @@ -244,7 +244,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage) for (op_idx = op_start; op_idx < op_end; op_idx++) { - op = (union init_op *)&(INIT_OPS(bp)[op_idx]); + op = (const union init_op *)&(INIT_OPS(bp)[op_idx]); /* Get generic data */ op_type = op->raw.op; addr = op->raw.offset; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c9effad..f511c3c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1310,7 +1310,7 @@ void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) { - struct sdm_op_gen op_gen = {0}; + u32 op_gen_command = 0; u32 comp_addr = BAR_CSTRORM_INTMEM + CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func); @@ -1321,13 +1321,13 @@ int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) return 1; } - op_gen.command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); - op_gen.command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); - op_gen.command |= OP_GEN_AGG_VECT(clnup_func); - op_gen.command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; + op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); + op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); + op_gen_command |= OP_GEN_AGG_VECT(clnup_func); + op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; DP(BNX2X_MSG_SP, "sending FW Final cleanup\n"); - REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen.command); + REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command); if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { BNX2X_ERR("FW final cleanup did not succeed\n"); @@ -2641,7 +2641,7 @@ void bnx2x__link_status_update(struct bnx2x *bp) static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, u16 vlan_val, u8 allowed_prio) { - struct bnx2x_func_state_params func_params = {0}; + struct bnx2x_func_state_params func_params = {NULL}; struct bnx2x_func_afex_update_params *f_update_params = &func_params.params.afex_update; @@ -2666,7 +2666,7 @@ static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type, u16 vif_index, u8 func_bit_map) { - struct bnx2x_func_state_params func_params = {0}; + struct bnx2x_func_state_params func_params = {NULL}; struct bnx2x_func_afex_viflists_params *update_params = &func_params.params.afex_viflists; int rc; @@ -2682,7 +2682,7 @@ static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type, /* set parameters according to cmd_type */ update_params->afex_vif_list_command = cmd_type; - update_params->vif_list_index = cpu_to_le16(vif_index); + update_params->vif_list_index = vif_index; update_params->func_bit_map = (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map; update_params->func_to_clear = 0; @@ -3189,7 +3189,7 @@ static void bnx2x_pf_init(struct bnx2x *bp) if (bp->port.pmf) storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); - /* init Event Queue */ + /* init Event Queue - PCI bus guarantees correct endianity*/ eq_data.base_addr.hi = U64_HI(bp->eq_mapping); eq_data.base_addr.lo = U64_LO(bp->eq_mapping); eq_data.producer = bp->eq_prod; @@ -3279,65 +3279,75 @@ static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp) struct fcoe_statistics_params *fw_fcoe_stat = &bp->fw_stats_data->fcoe; - ADD_64(fcoe_stat->rx_bytes_hi, 0, fcoe_stat->rx_bytes_lo, - fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); + ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0, + fcoe_stat->rx_bytes_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); - ADD_64(fcoe_stat->rx_bytes_hi, - fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, - fcoe_stat->rx_bytes_lo, - fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); - ADD_64(fcoe_stat->rx_bytes_hi, - fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, - fcoe_stat->rx_bytes_lo, - fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); - ADD_64(fcoe_stat->rx_bytes_hi, - fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, - fcoe_stat->rx_bytes_lo, - fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); - ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo, - fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); - ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo, - fcoe_q_tstorm_stats->rcv_ucast_pkts); + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_ucast_pkts); - ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo, - fcoe_q_tstorm_stats->rcv_bcast_pkts); + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_bcast_pkts); - ADD_64(fcoe_stat->rx_frames_hi, 0, fcoe_stat->rx_frames_lo, - fcoe_q_tstorm_stats->rcv_mcast_pkts); + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_mcast_pkts); - ADD_64(fcoe_stat->tx_bytes_hi, 0, fcoe_stat->tx_bytes_lo, - fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); + ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0, + fcoe_stat->tx_bytes_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); - ADD_64(fcoe_stat->tx_bytes_hi, - fcoe_q_xstorm_stats->ucast_bytes_sent.hi, - fcoe_stat->tx_bytes_lo, - fcoe_q_xstorm_stats->ucast_bytes_sent.lo); + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->ucast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->ucast_bytes_sent.lo); - ADD_64(fcoe_stat->tx_bytes_hi, - fcoe_q_xstorm_stats->bcast_bytes_sent.hi, - fcoe_stat->tx_bytes_lo, - fcoe_q_xstorm_stats->bcast_bytes_sent.lo); + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->bcast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->bcast_bytes_sent.lo); - ADD_64(fcoe_stat->tx_bytes_hi, - fcoe_q_xstorm_stats->mcast_bytes_sent.hi, - fcoe_stat->tx_bytes_lo, - fcoe_q_xstorm_stats->mcast_bytes_sent.lo); + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->mcast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->mcast_bytes_sent.lo); - ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo, - fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); - ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo, - fcoe_q_xstorm_stats->ucast_pkts_sent); + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->ucast_pkts_sent); - ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo, - fcoe_q_xstorm_stats->bcast_pkts_sent); + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->bcast_pkts_sent); - ADD_64(fcoe_stat->tx_frames_hi, 0, fcoe_stat->tx_frames_lo, - fcoe_q_xstorm_stats->mcast_pkts_sent); + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->mcast_pkts_sent); } /* ask L5 driver to add data to the struct */ @@ -4829,7 +4839,8 @@ static void bnx2x_handle_classification_eqe(struct bnx2x *bp, /* Always push next commands out, don't wait here */ __set_bit(RAMROD_CONT, &ramrod_flags); - switch (elem->message.data.eth_event.echo >> BNX2X_SWCID_SHIFT) { + switch (le32_to_cpu((__force __le32)elem->message.data.eth_event.echo) + >> BNX2X_SWCID_SHIFT) { case BNX2X_FILTER_MAC_PENDING: DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n"); if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp))) @@ -5016,9 +5027,11 @@ static void bnx2x_eq_int(struct bnx2x *bp) rc); goto next_spqe; } - cid = SW_CID(elem->message.data.cfc_del_event.cid); - opcode = elem->message.opcode; + /* elem CID originates from FW; actually LE */ + cid = SW_CID((__force __le32) + elem->message.data.cfc_del_event.cid); + opcode = elem->message.opcode; /* handle eq element */ switch (opcode) { @@ -5537,7 +5550,7 @@ void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id); - /* write indecies to HW */ + /* write indices to HW - PCI guarantees endianity of regpairs */ bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); } @@ -5625,6 +5638,7 @@ static void bnx2x_init_def_sb(struct bnx2x *bp) bnx2x_zero_sp_sb(bp); + /* PCI guarantees endianity of regpairs */ sp_sb_data.state = SB_ENABLED; sp_sb_data.host_sb_addr.lo = U64_LO(section); sp_sb_data.host_sb_addr.hi = U64_HI(section); @@ -5722,9 +5736,9 @@ int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, return 0; } -int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, - unsigned long *rx_accept_flags, - unsigned long *tx_accept_flags) +static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, + unsigned long *rx_accept_flags, + unsigned long *tx_accept_flags) { /* Clear the flags first */ *rx_accept_flags = 0; @@ -10541,10 +10555,10 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi) { - mac_hi = cpu_to_be16(mac_hi); - mac_lo = cpu_to_be32(mac_lo); - memcpy(mac_buf, &mac_hi, sizeof(mac_hi)); - memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo)); + __be16 mac_hi_be = cpu_to_be16(mac_hi); + __be32 mac_lo_be = cpu_to_be32(mac_lo); + memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be)); + memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be)); } static void bnx2x_get_port_hwinfo(struct bnx2x *bp) @@ -12005,7 +12019,7 @@ static int bnx2x_check_firmware(struct bnx2x *bp) struct bnx2x_fw_file_hdr *fw_hdr; struct bnx2x_fw_file_section *sections; u32 offset, len, num_ops; - u16 *ops_offsets; + __be16 *ops_offsets; int i; const u8 *fw_ver; @@ -12030,7 +12044,7 @@ static int bnx2x_check_firmware(struct bnx2x *bp) /* Likewise for the init_ops offsets */ offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); - ops_offsets = (u16 *)(firmware->data + offset); + ops_offsets = (__force __be16 *)(firmware->data + offset); num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 7d6d601..7306416 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -707,7 +707,8 @@ static inline void bnx2x_vlan_mac_set_cmd_hdr_e2(struct bnx2x *bp, static inline void bnx2x_vlan_mac_set_rdata_hdr_e2(u32 cid, int type, struct eth_classify_header *hdr, int rule_cnt) { - hdr->echo = (cid & BNX2X_SWCID_MASK) | (type << BNX2X_SWCID_SHIFT); + hdr->echo = cpu_to_le32((cid & BNX2X_SWCID_MASK) | + (type << BNX2X_SWCID_SHIFT)); hdr->rule_cnt = (u8)rule_cnt; } @@ -813,8 +814,9 @@ static inline void bnx2x_vlan_mac_set_rdata_hdr_e1x(struct bnx2x *bp, hdr->length = 1; hdr->offset = (u8)cam_offset; - hdr->client_id = 0xff; - hdr->echo = ((r->cid & BNX2X_SWCID_MASK) | (type << BNX2X_SWCID_SHIFT)); + hdr->client_id = cpu_to_le16(0xff); + hdr->echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (type << BNX2X_SWCID_SHIFT)); } static inline void bnx2x_vlan_mac_set_cfg_entry_e1x(struct bnx2x *bp, @@ -903,7 +905,7 @@ static void bnx2x_set_one_vlan_e2(struct bnx2x *bp, (struct eth_classify_rules_ramrod_data *)(raw->rdata); int rule_cnt = rule_idx + 1; union eth_classify_rule_cmd *rule_entry = &data->rules[rule_idx]; - int cmd = elem->cmd_data.vlan_mac.cmd; + enum bnx2x_vlan_mac_cmd cmd = elem->cmd_data.vlan_mac.cmd; bool add = (cmd == BNX2X_VLAN_MAC_ADD) ? true : false; u16 vlan = elem->cmd_data.vlan_mac.u.vlan.vlan; @@ -953,7 +955,7 @@ static void bnx2x_set_one_vlan_mac_e2(struct bnx2x *bp, (struct eth_classify_rules_ramrod_data *)(raw->rdata); int rule_cnt = rule_idx + 1; union eth_classify_rule_cmd *rule_entry = &data->rules[rule_idx]; - int cmd = elem->cmd_data.vlan_mac.cmd; + enum bnx2x_vlan_mac_cmd cmd = elem->cmd_data.vlan_mac.cmd; bool add = (cmd == BNX2X_VLAN_MAC_ADD) ? true : false; u16 vlan = elem->cmd_data.vlan_mac.u.vlan_mac.vlan; u8 *mac = elem->cmd_data.vlan_mac.u.vlan_mac.mac; @@ -1532,7 +1534,7 @@ static inline int bnx2x_vlan_mac_get_registry_elem( bool restore, struct bnx2x_vlan_mac_registry_elem **re) { - int cmd = elem->cmd_data.vlan_mac.cmd; + enum bnx2x_vlan_mac_cmd cmd = elem->cmd_data.vlan_mac.cmd; struct bnx2x_vlan_mac_registry_elem *reg_elem; /* Allocate a new registry element if needed. */ @@ -1591,7 +1593,7 @@ static int bnx2x_execute_vlan_mac(struct bnx2x *bp, bool restore = test_bit(RAMROD_RESTORE, ramrod_flags); bool drv_only = test_bit(RAMROD_DRV_CLR_ONLY, ramrod_flags); struct bnx2x_vlan_mac_registry_elem *reg_elem; - int cmd; + enum bnx2x_vlan_mac_cmd cmd; /* * If DRIVER_ONLY execution is requested, cleanup a registry @@ -2186,7 +2188,7 @@ static inline void bnx2x_rx_mode_set_rdata_hdr_e2(u32 cid, struct eth_classify_header *hdr, u8 rule_cnt) { - hdr->echo = cid; + hdr->echo = cpu_to_le32(cid); hdr->rule_cnt = rule_cnt; } @@ -2433,7 +2435,7 @@ static int bnx2x_mcast_wait(struct bnx2x *bp, static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp, struct bnx2x_mcast_obj *o, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { int total_sz; struct bnx2x_pending_mcast_cmd *new_cmd; @@ -2565,7 +2567,7 @@ static inline u8 bnx2x_mcast_get_rx_tx_flag(struct bnx2x_mcast_obj *o) static void bnx2x_mcast_set_one_rule_e2(struct bnx2x *bp, struct bnx2x_mcast_obj *o, int idx, union bnx2x_mcast_config_data *cfg_data, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_raw_obj *r = &o->raw; struct eth_multicast_rules_ramrod_data *data = @@ -2629,7 +2631,7 @@ static inline int bnx2x_mcast_handle_restore_cmd_e2( int *rdata_idx) { int cur_bin, cnt = *rdata_idx; - union bnx2x_mcast_config_data cfg_data = {0}; + union bnx2x_mcast_config_data cfg_data = {NULL}; /* go through the registry and configure the bins from it */ for (cur_bin = bnx2x_mcast_get_next_bin(o, start_bin); cur_bin >= 0; @@ -2661,7 +2663,7 @@ static inline void bnx2x_mcast_hdl_pending_add_e2(struct bnx2x *bp, { struct bnx2x_mcast_mac_elem *pmac_pos, *pmac_pos_n; int cnt = *line_idx; - union bnx2x_mcast_config_data cfg_data = {0}; + union bnx2x_mcast_config_data cfg_data = {NULL}; list_for_each_entry_safe(pmac_pos, pmac_pos_n, &cmd_pos->data.macs_head, link) { @@ -2784,7 +2786,7 @@ static inline void bnx2x_mcast_hdl_add(struct bnx2x *bp, int *line_idx) { struct bnx2x_mcast_list_elem *mlist_pos; - union bnx2x_mcast_config_data cfg_data = {0}; + union bnx2x_mcast_config_data cfg_data = {NULL}; int cnt = *line_idx; list_for_each_entry(mlist_pos, &p->mcast_list, link) { @@ -2831,7 +2833,8 @@ static inline void bnx2x_mcast_hdl_del(struct bnx2x *bp, * Returns number of lines filled in the ramrod data in total. */ static inline int bnx2x_mcast_handle_current_cmd(struct bnx2x *bp, - struct bnx2x_mcast_ramrod_params *p, int cmd, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd, int start_cnt) { struct bnx2x_mcast_obj *o = p->mcast_obj; @@ -2865,7 +2868,7 @@ static inline int bnx2x_mcast_handle_current_cmd(struct bnx2x *bp, static int bnx2x_mcast_validate_e2(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_mcast_obj *o = p->mcast_obj; int reg_sz = o->get_registry_size(o); @@ -2934,8 +2937,9 @@ static inline void bnx2x_mcast_set_rdata_hdr_e2(struct bnx2x *bp, struct eth_multicast_rules_ramrod_data *data = (struct eth_multicast_rules_ramrod_data *)(r->rdata); - data->header.echo = ((r->cid & BNX2X_SWCID_MASK) | - (BNX2X_FILTER_MCAST_PENDING << BNX2X_SWCID_SHIFT)); + data->header.echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (BNX2X_FILTER_MCAST_PENDING << + BNX2X_SWCID_SHIFT)); data->header.rule_cnt = len; } @@ -2969,7 +2973,7 @@ static inline int bnx2x_mcast_refresh_registry_e2(struct bnx2x *bp, static int bnx2x_mcast_setup_e2(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_raw_obj *raw = &p->mcast_obj->raw; struct bnx2x_mcast_obj *o = p->mcast_obj; @@ -3055,7 +3059,7 @@ static int bnx2x_mcast_setup_e2(struct bnx2x *bp, static int bnx2x_mcast_validate_e1h(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { /* Mark, that there is a work to do */ if ((cmd == BNX2X_MCAST_CMD_DEL) || (cmd == BNX2X_MCAST_CMD_RESTORE)) @@ -3117,7 +3121,7 @@ static inline void bnx2x_mcast_hdl_restore_e1h(struct bnx2x *bp, */ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { int i; struct bnx2x_mcast_obj *o = p->mcast_obj; @@ -3171,7 +3175,7 @@ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp, static int bnx2x_mcast_validate_e1(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_mcast_obj *o = p->mcast_obj; int reg_sz = o->get_registry_size(o); @@ -3244,7 +3248,7 @@ static void bnx2x_mcast_revert_e1(struct bnx2x *bp, static void bnx2x_mcast_set_one_rule_e1(struct bnx2x *bp, struct bnx2x_mcast_obj *o, int idx, union bnx2x_mcast_config_data *cfg_data, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_raw_obj *r = &o->raw; struct mac_configuration_cmd *data = @@ -3288,9 +3292,10 @@ static inline void bnx2x_mcast_set_rdata_hdr_e1(struct bnx2x *bp, BNX2X_MAX_MULTICAST*(1 + r->func_id)); data->hdr.offset = offset; - data->hdr.client_id = 0xff; - data->hdr.echo = ((r->cid & BNX2X_SWCID_MASK) | - (BNX2X_FILTER_MCAST_PENDING << BNX2X_SWCID_SHIFT)); + data->hdr.client_id = cpu_to_le16(0xff); + data->hdr.echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (BNX2X_FILTER_MCAST_PENDING << + BNX2X_SWCID_SHIFT)); data->hdr.length = len; } @@ -3313,7 +3318,7 @@ static inline int bnx2x_mcast_handle_restore_cmd_e1( { struct bnx2x_mcast_mac_elem *elem; int i = 0; - union bnx2x_mcast_config_data cfg_data = {0}; + union bnx2x_mcast_config_data cfg_data = {NULL}; /* go through the registry and configure the MACs from it. */ list_for_each_entry(elem, &o->registry.exact_match.macs, link) { @@ -3338,7 +3343,7 @@ static inline int bnx2x_mcast_handle_pending_cmds_e1( struct bnx2x_pending_mcast_cmd *cmd_pos; struct bnx2x_mcast_mac_elem *pmac_pos; struct bnx2x_mcast_obj *o = p->mcast_obj; - union bnx2x_mcast_config_data cfg_data = {0}; + union bnx2x_mcast_config_data cfg_data = {NULL}; int cnt = 0; @@ -3462,7 +3467,7 @@ static inline int bnx2x_mcast_refresh_registry_e1(struct bnx2x *bp, static int bnx2x_mcast_setup_e1(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_mcast_obj *o = p->mcast_obj; struct bnx2x_raw_obj *raw = &o->raw; @@ -3566,7 +3571,7 @@ static void bnx2x_mcast_set_registry_size_aprox(struct bnx2x_mcast_obj *o, int bnx2x_config_mcast(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, - int cmd) + enum bnx2x_mcast_cmd cmd) { struct bnx2x_mcast_obj *o = p->mcast_obj; struct bnx2x_raw_obj *r = &o->raw; @@ -4089,8 +4094,8 @@ static int bnx2x_setup_rss(struct bnx2x *bp, DP(BNX2X_MSG_SP, "Configuring RSS\n"); /* Set an echo field */ - data->echo = (r->cid & BNX2X_SWCID_MASK) | - (r->state << BNX2X_SWCID_SHIFT); + data->echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (r->state << BNX2X_SWCID_SHIFT)); /* RSS mode */ if (test_bit(BNX2X_RSS_MODE_DISABLED, &p->rss_flags)) @@ -5749,21 +5754,20 @@ inline int bnx2x_func_send_afex_viflists(struct bnx2x *bp, struct bnx2x_func_sp_obj *o = params->f_obj; struct afex_vif_list_ramrod_data *rdata = (struct afex_vif_list_ramrod_data *)o->afex_rdata; - struct bnx2x_func_afex_viflists_params *afex_viflist_params = + struct bnx2x_func_afex_viflists_params *afex_vif_params = ¶ms->params.afex_viflists; u64 *p_rdata = (u64 *)rdata; memset(rdata, 0, sizeof(*rdata)); /* Fill the ramrod data with provided parameters */ - rdata->vif_list_index = afex_viflist_params->vif_list_index; - rdata->func_bit_map = afex_viflist_params->func_bit_map; - rdata->afex_vif_list_command = - afex_viflist_params->afex_vif_list_command; - rdata->func_to_clear = afex_viflist_params->func_to_clear; + rdata->vif_list_index = cpu_to_le16(afex_vif_params->vif_list_index); + rdata->func_bit_map = afex_vif_params->func_bit_map; + rdata->afex_vif_list_command = afex_vif_params->afex_vif_list_command; + rdata->func_to_clear = afex_vif_params->func_to_clear; /* send in echo type of sub command */ - rdata->echo = afex_viflist_params->afex_vif_list_command; + rdata->echo = afex_vif_params->afex_vif_list_command; /* No need for an explicit memory barrier here as long we would * need to ensure the ordering of writing to the SPQ element diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index ff8887c..ff90760 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -524,7 +524,7 @@ struct bnx2x_mcast_ramrod_params { int mcast_list_len; }; -enum { +enum bnx2x_mcast_cmd { BNX2X_MCAST_CMD_ADD, BNX2X_MCAST_CMD_CONT, BNX2X_MCAST_CMD_DEL, @@ -573,7 +573,8 @@ struct bnx2x_mcast_obj { * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above) */ int (*config_mcast)(struct bnx2x *bp, - struct bnx2x_mcast_ramrod_params *p, int cmd); + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); /** * Fills the ramrod data during the RESTORE flow. @@ -590,11 +591,13 @@ struct bnx2x_mcast_obj { int start_bin, int *rdata_idx); int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, - struct bnx2x_mcast_ramrod_params *p, int cmd); + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); void (*set_one_rule)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, int idx, - union bnx2x_mcast_config_data *cfg_data, int cmd); + union bnx2x_mcast_config_data *cfg_data, + enum bnx2x_mcast_cmd cmd); /** Checks if there are more mcast MACs to be set or a previous * command is still pending. @@ -617,7 +620,8 @@ struct bnx2x_mcast_obj { * feasible. */ int (*validate)(struct bnx2x *bp, - struct bnx2x_mcast_ramrod_params *p, int cmd); + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); /** * Restore the values of internal counters in case of a failure. @@ -1347,7 +1351,8 @@ void bnx2x_init_mcast_obj(struct bnx2x *bp, * completions. */ int bnx2x_config_mcast(struct bnx2x *bp, - struct bnx2x_mcast_ramrod_params *p, int cmd); + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); /****************** CREDIT POOL ****************/ void bnx2x_init_mac_credit_pool(struct bnx2x *bp, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 1069669..4397f8b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -1010,8 +1010,8 @@ static int bnx2x_storm_stats_update(struct bnx2x *bp) UPDATE_EXTEND_TSTAT(rcv_bcast_pkts, total_broadcast_packets_received); UPDATE_EXTEND_E_TSTAT(pkts_too_big_discard, - etherstatsoverrsizepkts); - UPDATE_EXTEND_E_TSTAT(no_buff_discard, no_buff_discard); + etherstatsoverrsizepkts, 32); + UPDATE_EXTEND_E_TSTAT(no_buff_discard, no_buff_discard, 16); SUB_EXTEND_USTAT(ucast_no_buff_pkts, total_unicast_packets_received); @@ -1090,15 +1090,15 @@ static int bnx2x_storm_stats_update(struct bnx2x *bp) estats->total_bytes_received_lo, estats->rx_stat_ifhcinbadoctets_lo); - ADD_64(estats->total_bytes_received_hi, - le32_to_cpu(tfunc->rcv_error_bytes.hi), - estats->total_bytes_received_lo, - le32_to_cpu(tfunc->rcv_error_bytes.lo)); + ADD_64_LE(estats->total_bytes_received_hi, + tfunc->rcv_error_bytes.hi, + estats->total_bytes_received_lo, + tfunc->rcv_error_bytes.lo); - ADD_64(estats->error_bytes_received_hi, - le32_to_cpu(tfunc->rcv_error_bytes.hi), - estats->error_bytes_received_lo, - le32_to_cpu(tfunc->rcv_error_bytes.lo)); + ADD_64_LE(estats->error_bytes_received_hi, + tfunc->rcv_error_bytes.hi, + estats->error_bytes_received_lo, + tfunc->rcv_error_bytes.lo); UPDATE_ESTAT(etherstatsoverrsizepkts, rx_stat_dot3statsframestoolong); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h index 63a2f85..364e37e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h @@ -421,16 +421,19 @@ struct bnx2x_fw_port_stats_old { new->s); \ } while (0) -#define UPDATE_EXTEND_TSTAT(s, t) \ +#define UPDATE_EXTEND_TSTAT_X(s, t, size) \ do { \ - diff = le32_to_cpu(tclient->s) - le32_to_cpu(old_tclient->s); \ + diff = le##size##_to_cpu(tclient->s) - \ + le##size##_to_cpu(old_tclient->s); \ old_tclient->s = tclient->s; \ ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \ } while (0) -#define UPDATE_EXTEND_E_TSTAT(s, t) \ +#define UPDATE_EXTEND_TSTAT(s, t) UPDATE_EXTEND_TSTAT_X(s, t, 32) + +#define UPDATE_EXTEND_E_TSTAT(s, t, size) \ do { \ - UPDATE_EXTEND_TSTAT(s, t); \ + UPDATE_EXTEND_TSTAT_X(s, t, size); \ ADD_EXTEND_64(estats->t##_hi, estats->t##_lo, diff); \ } while (0) -- cgit v0.10.2 From 580d9d081341aad5341884f9e6b070c01512e94c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:51 +0000 Subject: bnx2x: correct memory release scheme Fix an incorrect SR-IOV memory release which was committed in 1ab4434. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f511c3c..ac00ddc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -7738,10 +7738,6 @@ void bnx2x_free_mem(struct bnx2x *bp) { int i; - /* fastpath */ - bnx2x_free_fp_mem(bp); - /* end of fastpath */ - BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping, sizeof(struct host_sp_status_block)); @@ -7762,6 +7758,8 @@ void bnx2x_free_mem(struct bnx2x *bp) BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping, BCM_PAGE_SIZE * NUM_EQ_PAGES); + + bnx2x_iov_free_mem(bp); } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index d51189b..b405017 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -773,6 +773,7 @@ static inline void bnx2x_vf_mbx(struct bnx2x *bp, static inline int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) {return line; } static inline void bnx2x_iov_init_dq(struct bnx2x *bp) {} static inline int bnx2x_iov_alloc_mem(struct bnx2x *bp) {return 0; } +static inline void bnx2x_iov_free_mem(struct bnx2x *bp) {} static inline int bnx2x_iov_chip_cleanup(struct bnx2x *bp) {return 0; } static inline void bnx2x_iov_init_dmae(struct bnx2x *bp) {} static inline int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, -- cgit v0.10.2 From ad9b4359c7839d4d87aad2c0d50c8a2ef3bcddb3 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 23 Jan 2013 03:21:52 +0000 Subject: cnic, bnx2x: Add CNIC_DRV_STATE_HANDLES_IRQ to ethdev->drv_state In INTA mode, cnic and bnx2x share the same IRQ. During chip reset, for example, cnic will stop servicing IRQs after it has shutdown the cnic hardware resources. However, the shared IRQ is still active as bnx2x needs to finish the reset. There is a window when bnx2x does not know that cnic is no longer handling IRQ and things don't always work properly. Add a flag to tell bnx2x that cnic is handling IRQ. The flag is set before the first cnic IRQ is expected and cleared when no more cnic IRQs are expected, so there should be no race conditions. Signed-off-by: Michael Chan Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index ac00ddc..c4daee1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1875,14 +1875,12 @@ irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) if (status & (mask | 0x1)) { struct cnic_ops *c_ops = NULL; - if (likely(bp->state == BNX2X_STATE_OPEN)) { - rcu_read_lock(); - c_ops = rcu_dereference(bp->cnic_ops); - if (c_ops) - c_ops->cnic_handler(bp->cnic_data, - NULL); - rcu_read_unlock(); - } + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops && (bp->cnic_eth_dev.drv_state & + CNIC_DRV_STATE_HANDLES_IRQ)) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); status &= ~mask; } diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index df8c30d..1c4dadc 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -4816,6 +4816,8 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev) return err; } + ethdev->drv_state |= CNIC_DRV_STATE_HANDLES_IRQ; + return 0; } @@ -5136,6 +5138,7 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev) if (ret) return ret; + ethdev->drv_state |= CNIC_DRV_STATE_HANDLES_IRQ; return 0; } @@ -5387,6 +5390,7 @@ static void cnic_stop_hw(struct cnic_dev *dev) } cnic_shutdown_rings(dev); cp->stop_cm(dev); + cp->ethdev->drv_state &= ~CNIC_DRV_STATE_HANDLES_IRQ; clear_bit(CNIC_F_CNIC_UP, &dev->flags); RCU_INIT_POINTER(cp->ulp_ops[CNIC_ULP_L4], NULL); synchronize_rcu(); diff --git a/drivers/net/ethernet/broadcom/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h index 2a35436..0c9367a 100644 --- a/drivers/net/ethernet/broadcom/cnic_if.h +++ b/drivers/net/ethernet/broadcom/cnic_if.h @@ -179,6 +179,7 @@ struct cnic_eth_dev { #define CNIC_DRV_STATE_NO_ISCSI_OOO 0x00000004 #define CNIC_DRV_STATE_NO_ISCSI 0x00000008 #define CNIC_DRV_STATE_NO_FCOE 0x00000010 +#define CNIC_DRV_STATE_HANDLES_IRQ 0x00000020 u32 chip_id; u32 max_kwqe_pending; struct pci_dev *pdev; -- cgit v0.10.2 From ca9bdb9b279d3bffb7f8a0dc15686a2c23fa0c12 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 23 Jan 2013 03:21:53 +0000 Subject: bnx2x: Fix compilation with stop-on-error Commit 823e1d9 caused bnx2x to fail once BNX2X_STOP_ON_ERROR is set. Fixes compilation by moving function declarations between header files. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 55ae8f9..e4605a9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -122,6 +122,8 @@ do { \ dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__); \ } while (0) +/* Error handling */ +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int); #ifdef BNX2X_STOP_ON_ERROR #define bnx2x_panic() \ do { \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 4635c02..aee7671 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -479,8 +479,6 @@ int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state); */ void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value); /* Error handling */ -void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int); - void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl); /* validate currect fw is loaded */ -- cgit v0.10.2 From 4c133c39ae1bc541b3db5903a680da738a0c57e3 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Wed, 23 Jan 2013 03:21:54 +0000 Subject: bnx2x: SR-IOV version compatibility bugfix When posting a message on the bulletin board, the PF calculates crc over the message and places the result in the message. When the VF samples the Bulletin Board it copies the message aside and validates this crc. The length of the message is crucial here and must be the same in both parties. Since the PF is running in the Hypervisor and the VF is running in a Vm, they can possibly be of different versions. As the Bulletin Board is designed to grow forward in future versions, in the VF the length must not be the size of the message structure but instead it should be a field in the message itself. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 5e45cb9..6adfa20 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3124,7 +3124,7 @@ u32 bnx2x_crc_vf_bulletin(struct bnx2x *bp, { return crc32(BULLETIN_CRC_SEED, ((u8 *)bulletin) + sizeof(bulletin->crc), - BULLETIN_CONTENT_SIZE - sizeof(bulletin->crc)); + bulletin->length - sizeof(bulletin->crc)); } /* Check for new posts on the bulletin board */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 9cef520..3624612 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1631,7 +1631,6 @@ int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf) dma_addr_t pf_addr = BP_VF_BULLETIN_DMA(bp)->mapping + vf * BULLETIN_CONTENT_SIZE; dma_addr_t vf_addr = bnx2x_vf(bp, vf, bulletin_map); - u32 len = BULLETIN_CONTENT_SIZE; int rc; /* can only update vf after init took place */ @@ -1641,11 +1640,12 @@ int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf) /* increment bulletin board version and compute crc */ bulletin->version++; + bulletin->length = BULLETIN_CONTENT_SIZE; bulletin->crc = bnx2x_crc_vf_bulletin(bp, bulletin); /* propagate bulletin board via dmae to vm memory */ rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, bnx2x_vf(bp, vf, abs_vfid), U64_HI(vf_addr), - U64_LO(vf_addr), len/4); + U64_LO(vf_addr), bulletin->length / 4); return rc; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h index a74477c..bfc80ba 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -318,7 +318,8 @@ struct pf_vf_bulletin_content { u32 crc; /* crc of structure to ensure is not in * mid-update */ - u32 version; + u16 version; + u16 length; aligned_u64 valid_bitmap; /* bitmap indicating which fields * hold valid values -- cgit v0.10.2 From dfcc4615f09c33454bc553567f7c7506cae60cb9 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 8 Nov 2012 07:07:08 +0000 Subject: ixgbe: ethtool ixgbe_diag_test cleanup This patch cleans up the ethtool diagnostics test by ensuring that the tests work properly regardless of what state the adapter was in. The SRIOV VF check is done at the beginning, forgoing the link test. The if_running -> dev_close is moved before the link test, as well as a call to enable the Tx laser. This ensures that the link test will return valid results even when adapter was previously down. Also, a call to disable the Tx laser is added if the device was down before the start. This ensures consistent behavior of the Tx laser before and after the diagnostic checks. The end result is consistent behavior regardless of device state. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 3268584..21bc72e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1837,19 +1837,11 @@ static void ixgbe_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, u64 *data) { struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; bool if_running = netif_running(netdev); set_bit(__IXGBE_TESTING, &adapter->state); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { - /* Offline tests */ - - e_info(hw, "offline testing starting\n"); - - /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ - if (ixgbe_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { int i; for (i = 0; i < adapter->num_vfs; i++) { @@ -1870,12 +1862,24 @@ static void ixgbe_diag_test(struct net_device *netdev, } } + /* Offline tests */ + e_info(hw, "offline testing starting\n"); + if (if_running) /* indicate we're in test mode */ dev_close(netdev); - else - ixgbe_reset(adapter); + /* bringing adapter down disables SFP+ optics */ + if (hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result + */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); e_info(hw, "register testing starting\n"); if (ixgbe_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1908,16 +1912,22 @@ static void ixgbe_diag_test(struct net_device *netdev, skip_loopback: ixgbe_reset(adapter); + /* clear testing bit and return adapter to previous state */ clear_bit(__IXGBE_TESTING, &adapter->state); if (if_running) dev_open(netdev); } else { e_info(hw, "online testing starting\n"); + + /* if adapter is down, SFP+ optics will be disabled */ + if (!if_running && hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); + /* Online tests */ if (ixgbe_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - /* Online tests aren't run; pass by default */ + /* Offline tests aren't run; pass by default */ data[0] = 0; data[1] = 0; data[2] = 0; @@ -1925,6 +1935,10 @@ skip_loopback: clear_bit(__IXGBE_TESTING, &adapter->state); } + + /* if adapter was down, ensure SFP+ optics are disabled again */ + if (!if_running && hw->mac.ops.disable_tx_laser) + hw->mac.ops.disable_tx_laser(hw); skip_ol_tests: msleep_interruptible(4 * 1000); } -- cgit v0.10.2 From aeb8264847c0194e42c8023cea89305c377f20e3 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 15 Nov 2012 01:10:37 +0000 Subject: ixgbe: add missing supported filters to get_ts_info This patch updates the filters for ethtool's get_ts_info to return support for all filters which can be supported by upscaling to ptp_v2_event. The intent behind this change is due to reasoning that we do in fact support the filters. (hwtstamp_ioctl returns success after setting the filter to the upscaled version). In this way we can remain consistent over which filters are supported via the get_ts_info ioctl and which filters are in practice actually supported. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 21bc72e..1513b10 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2709,6 +2709,14 @@ static int ixgbe_get_ts_info(struct net_device *dev, (1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); break; default: -- cgit v0.10.2 From f2f33387f999bd914938dc2da4a3408ea14ad878 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:24:35 +0000 Subject: ixgbe: Update ptp_overflow check comment and jiffies This patch fixes the comment on ptp_overflow_check to match up with what is currently used as the parameters. Also change the jiffies check to use time_is_after_jiffies macro. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 1a751c9..2e54e0c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -407,21 +407,21 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) /** - * ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow - * @work: structure containing information about this work task + * ixgbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow + * @adapter: private adapter struct * - * this work function is scheduled to continue reading the timecounter + * this watchdog task periodically reads the timecounter * in order to prevent missing when the system time registers wrap - * around. This needs to be run approximately twice a minute when no - * PTP activity is occurring. + * around. This needs to be run approximately twice a minute. */ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) { - unsigned long elapsed_jiffies = adapter->last_overflow_check - jiffies; + bool timeout = time_is_before_jiffies(adapter->last_overflow_check + + IXGBE_OVERFLOW_PERIOD); struct timespec ts; if ((adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) && - (elapsed_jiffies >= IXGBE_OVERFLOW_PERIOD)) { + (timeout)) { ixgbe_ptp_gettime(&adapter->ptp_caps, &ts); adapter->last_overflow_check = jiffies; } -- cgit v0.10.2 From 6cb562d6681155190c52ef7603c559c284eef159 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:24:41 +0000 Subject: ixgbe: Use watchdog check in favor of BPF for detecting latched timestamp This patch removes ixgbe_ptp_match, and the corresponding packet filtering from ixgbe driver. This code was previously causing some issues within the hotpath of the driver. However the code also provided a check against possible frozen Rx timestamp due to dropped packets when the Rx ring is full. This patch provides a replacement solution based on the watchdog. To this end, whenever a packet consumes the Rx timestamp it stores the jiffy value in the rx_ring structure. Watchdog updates its own jiffy timer whenever there is no valid timestamp in the registers. If watchdog detects a valid timestamp in the registers, (meaning that no Rx packet has consumed it yet) it will check which time is most recent, the last time in the watchdog, or any time in the rx_rings. If the most recent "event" was more than 5seconds ago, it will flush the Rx timestamp and print a warning message to the syslog. Reported-by: Alexander Duyck Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index f94c085..2572e13 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -231,6 +232,7 @@ struct ixgbe_ring { struct ixgbe_tx_buffer *tx_buffer_info; struct ixgbe_rx_buffer *rx_buffer_info; }; + unsigned long last_rx_timestamp; unsigned long state; u8 __iomem *tail; dma_addr_t dma; /* phys. address of descriptor ring */ @@ -581,10 +583,10 @@ struct ixgbe_adapter { struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_caps; unsigned long last_overflow_check; + unsigned long last_rx_ptp_check; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; - int rx_hwtstamp_filter; u32 base_incval; /* SR-IOV */ @@ -749,9 +751,10 @@ static inline struct netdev_queue *txring_txq(const struct ixgbe_ring *ring) extern void ixgbe_ptp_init(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); +extern void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, struct sk_buff *skb); -extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, +extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb); extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index e7109de..ab43288 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1441,7 +1441,7 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_rx_checksum(rx_ring, rx_desc, skb); - ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, rx_desc, skb); + ixgbe_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); if ((dev->features & NETIF_F_HW_VLAN_RX) && ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { @@ -5534,6 +5534,8 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) break; } + adapter->last_rx_ptp_check = jiffies; + if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) ixgbe_ptp_start_cyclecounter(adapter); @@ -5887,6 +5889,7 @@ static void ixgbe_service_task(struct work_struct *work) ixgbe_fdir_reinit_subtask(adapter); ixgbe_check_hang_subtask(adapter); ixgbe_ptp_overflow_check(adapter); + ixgbe_ptp_rx_hang(adapter); ixgbe_service_event_complete(adapter); } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 2e54e0c..dcc67e2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -101,10 +101,6 @@ #define NSECS_PER_SEC 1000000000ULL #endif -static struct sock_filter ptp_filter[] = { - PTP_FILTER -}; - /** * ixgbe_ptp_setup_sdp * @hw: the hardware private structure @@ -428,64 +424,44 @@ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) } /** - * ixgbe_ptp_match - determine if this skb matches a ptp packet - * @skb: pointer to the skb - * @hwtstamp: pointer to the hwtstamp_config to check - * - * Determine whether the skb should have been timestamped, assuming the - * hwtstamp was set via the hwtstamp ioctl. Returns non-zero when the packet - * should have a timestamp waiting in the registers, and 0 otherwise. + * ixgbe_ptp_rx_hang - detect error case when Rx timestamp registers latched + * @adapter: private network adapter structure * - * V1 packets have to check the version type to determine whether they are - * correct. However, we can't directly access the data because it might be - * fragmented in the SKB, in paged memory. In order to work around this, we - * use skb_copy_bits which will properly copy the data whether it is in the - * paged memory fragments or not. We have to copy the IP header as well as the - * message type. + * this watchdog task is scheduled to detect error case where hardware has + * dropped an Rx packet that was timestamped when the ring is full. The + * particular error is rare but leaves the device in a state unable to timestamp + * any future packets. */ -static int ixgbe_ptp_match(struct sk_buff *skb, int rx_filter) +void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) { - struct iphdr iph; - u8 msgtype; - unsigned int type, offset; - - if (rx_filter == HWTSTAMP_FILTER_NONE) - return 0; - - type = sk_run_filter(skb, ptp_filter); - - if (likely(rx_filter == HWTSTAMP_FILTER_PTP_V2_EVENT)) - return type & PTP_CLASS_V2; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_ring *rx_ring; + u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + unsigned long rx_event; + int n; - /* For the remaining cases actually check message type */ - switch (type) { - case PTP_CLASS_V1_IPV4: - skb_copy_bits(skb, OFF_IHL, &iph, sizeof(iph)); - offset = ETH_HLEN + (iph.ihl << 2) + UDP_HLEN + OFF_PTP_CONTROL; - break; - case PTP_CLASS_V1_IPV6: - offset = OFF_PTP6 + OFF_PTP_CONTROL; - break; - default: - /* other cases invalid or handled above */ - return 0; + /* if we don't have a valid timestamp in the registers, just update the + * timeout counter and exit + */ + if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) { + adapter->last_rx_ptp_check = jiffies; + return; } - /* Make sure our buffer is long enough */ - if (skb->len < offset) - return 0; + /* determine the most recent watchdog or rx_timestamp event */ + rx_event = adapter->last_rx_ptp_check; + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + if (time_after(rx_ring->last_rx_timestamp, rx_event)) + rx_event = rx_ring->last_rx_timestamp; + } - skb_copy_bits(skb, offset, &msgtype, sizeof(msgtype)); + /* only need to read the high RXSTMP register to clear the lock */ + if (time_is_before_jiffies(rx_event + 5*HZ)) { + IXGBE_READ_REG(hw, IXGBE_RXSTMPH); + adapter->last_rx_ptp_check = jiffies; - switch (rx_filter) { - case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: - return (msgtype == IXGBE_RXMTRL_V1_SYNC_MSG); - break; - case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: - return (msgtype == IXGBE_RXMTRL_V1_DELAY_REQ_MSG); - break; - default: - return 0; + e_warn(drv, "clearing RX Timestamp hang"); } } @@ -545,7 +521,7 @@ void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, * value, then store that result into the shhwtstamps structure which * is passed up the network stack */ -void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, +void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb) { @@ -557,43 +533,32 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, unsigned long flags; /* we cannot process timestamps on a ring without a q_vector */ - if (!q_vector || !q_vector->adapter) + if (!rx_ring->q_vector || !rx_ring->q_vector->adapter) return; - adapter = q_vector->adapter; + adapter = rx_ring->q_vector->adapter; hw = &adapter->hw; - if (likely(!ixgbe_ptp_match(skb, adapter->rx_hwtstamp_filter))) + if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) return; + /* + * Read the tsyncrxctl register afterwards in order to prevent taking an + * I/O hit on every packet. + */ tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); - - /* Check if we have a valid timestamp and make sure the skb should - * have been timestamped */ if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) return; /* - * Always read the registers, in order to clear a possible fault - * because of stagnant RX timestamp values for a packet that never - * reached the queue. + * Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. */ + rx_ring->last_rx_timestamp = jiffies; + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; - /* - * If the timestamp bit is set in the packet's descriptor, we know the - * timestamp belongs to this packet. No other packet can be - * timestamped until the registers for timestamping have been read. - * Therefor only one packet with this bit can be in the queue at a - * time, and the rx timestamp values that were in the registers belong - * to this packet. - * - * If nothing went wrong, then it should have a skb_shared_tx that we - * can turn into a skb_shared_hwtstamps. - */ - if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) - return; spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_cyc2time(&adapter->tc, regval); @@ -698,9 +663,6 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, return 0; } - /* Store filter value for later use */ - adapter->rx_hwtstamp_filter = config.rx_filter; - /* define ethertype filter for timestamping L2 packets */ if (is_l2) IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), @@ -902,10 +864,6 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) return; } - /* initialize the ptp filter */ - if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) - e_dev_warn("ptp_filter_init failed\n"); - spin_lock_init(&adapter->tmreg_lock); adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps, -- cgit v0.10.2 From 891dc0821d2089afcb04d3cace0a3522093680e7 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:24:46 +0000 Subject: ixgbe: Add ptp work item to poll for the Tx timestamp This patch copies the igb implementation of Tx timestamps, which uses a work item to poll for the Tx timestamp. In addition it adds a timeout value of 15 seconds, after which it will stop polling. This is necessary due to an issue with the descriptor being marked done before the Tx timestamp event has occurred. These two events don't correlate, so using the done bit on the descriptor as indication that the timestamp must already have been taken leads to potentially dropped Tx timestamps (especially under heavy packet load) Reported-by: Matthew Vick Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 2572e13..2618598 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -582,6 +582,9 @@ struct ixgbe_adapter { struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_caps; + struct work_struct ptp_tx_work; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; unsigned long last_overflow_check; unsigned long last_rx_ptp_check; spinlock_t tmreg_lock; @@ -752,8 +755,6 @@ extern void ixgbe_ptp_init(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter); -extern void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, - struct sk_buff *skb); extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ab43288..4c2e9d6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -850,9 +850,6 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, total_bytes += tx_buffer->bytecount; total_packets += tx_buffer->gso_segs; - if (unlikely(tx_buffer->tx_flags & IXGBE_TX_FLAGS_TSTAMP)) - ixgbe_ptp_tx_hwtstamp(q_vector, tx_buffer->skb); - /* free the skb */ dev_kfree_skb_any(tx_buffer->skb); @@ -5880,7 +5877,6 @@ static void ixgbe_service_task(struct work_struct *work) struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter, service_task); - ixgbe_reset_subtask(adapter); ixgbe_sfp_detection_subtask(adapter); ixgbe_sfp_link_config_subtask(adapter); @@ -5888,8 +5884,11 @@ static void ixgbe_service_task(struct work_struct *work) ixgbe_watchdog_subtask(adapter); ixgbe_fdir_reinit_subtask(adapter); ixgbe_check_hang_subtask(adapter); - ixgbe_ptp_overflow_check(adapter); - ixgbe_ptp_rx_hang(adapter); + + if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) { + ixgbe_ptp_overflow_check(adapter); + ixgbe_ptp_rx_hang(adapter); + } ixgbe_service_event_complete(adapter); } @@ -6435,6 +6434,11 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; tx_flags |= IXGBE_TX_FLAGS_TSTAMP; + + /* schedule check for Tx timestamp */ + adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; + schedule_work(&adapter->ptp_tx_work); } #ifdef CONFIG_PCI_IOV diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index dcc67e2..33cb8c6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -96,6 +96,7 @@ #define IXGBE_MAX_TIMEADJ_VALUE 0x7FFFFFFFFFFFFFFFULL #define IXGBE_OVERFLOW_PERIOD (HZ * 30) +#define IXGBE_PTP_TX_TIMEOUT (HZ * 15) #ifndef NSECS_PER_SEC #define NSECS_PER_SEC 1000000000ULL @@ -401,7 +402,6 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) } } - /** * ixgbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow * @adapter: private adapter struct @@ -416,8 +416,7 @@ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) IXGBE_OVERFLOW_PERIOD); struct timespec ts; - if ((adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) && - (timeout)) { + if (timeout) { ixgbe_ptp_gettime(&adapter->ptp_caps, &ts); adapter->last_overflow_check = jiffies; } @@ -467,48 +466,68 @@ void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) /** * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp - * @q_vector: structure containing interrupt and ring information - * @skb: particular skb to send timestamp with + * @adapter: the private adapter struct * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the shhwtstamps structure which * is passed up the network stack */ -void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, - struct sk_buff *skb) +static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter; - struct ixgbe_hw *hw; + struct ixgbe_hw *hw = &adapter->hw; struct skb_shared_hwtstamps shhwtstamps; u64 regval = 0, ns; - u32 tsynctxctl; unsigned long flags; - /* we cannot process timestamps on a ring without a q_vector */ - if (!q_vector || !q_vector->adapter) - return; - - adapter = q_vector->adapter; - hw = &adapter->hw; - - tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32; - /* - * if TX timestamp is not valid, exit after clearing the - * timestamp registers - */ - if (!(tsynctxctl & IXGBE_TSYNCTXCTL_VALID)) - return; - spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_cyc2time(&adapter->tc, regval); spin_unlock_irqrestore(&adapter->tmreg_lock, flags); memset(&shhwtstamps, 0, sizeof(shhwtstamps)); shhwtstamps.hwtstamp = ns_to_ktime(ns); - skb_tstamp_tx(skb, &shhwtstamps); + skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps); + + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; +} + +/** + * ixgbe_ptp_tx_hwtstamp_work + * @work: pointer to the work struct + * + * This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware + * timestamp has been taken for the current skb. It is necesary, because the + * descriptor's "done" bit does not correlate with the timestamp event. + */ +static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter, + ptp_tx_work); + struct ixgbe_hw *hw = &adapter->hw; + bool timeout = time_is_before_jiffies(adapter->ptp_tx_start + + IXGBE_PTP_TX_TIMEOUT); + u32 tsynctxctl; + + /* we have to have a valid skb */ + if (!adapter->ptp_tx_skb) + return; + + if (timeout) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + e_warn(drv, "clearing Tx Timestamp hang"); + return; + } + + tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); + if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID) + ixgbe_ptp_tx_hwtstamp(adapter); + else + /* reschedule to keep checking if it's not available yet */ + schedule_work(&adapter->ptp_tx_work); } /** @@ -865,6 +884,7 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) } spin_lock_init(&adapter->tmreg_lock); + INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work); adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps, &adapter->pdev->dev); @@ -896,6 +916,12 @@ void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) ixgbe_ptp_setup_sdp(adapter); + cancel_work_sync(&adapter->ptp_tx_work); + if (adapter->ptp_tx_skb) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + } + if (adapter->ptp_clock) { ptp_clock_unregister(adapter->ptp_clock); adapter->ptp_clock = NULL; -- cgit v0.10.2 From 12ff3f3b6c21fe8f4628b834919b393eb14aa7b2 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Sat, 1 Dec 2012 07:57:17 +0000 Subject: ixgbe: add warning when scheduling reset This patch adds warnings when a reset of the adapter is scheduled so that the user can see log of why the reset occurred. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 4c2e9d6..7e0bb95 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -803,6 +803,7 @@ static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) /* Do the reset outside of interrupt context */ if (!test_bit(__IXGBE_DOWN, &adapter->state)) { adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; + e_warn(drv, "initiating reset due to tx timeout\n"); ixgbe_service_event_schedule(adapter); } } @@ -5613,6 +5614,7 @@ static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) * to get done, so reset controller to flush Tx. * (Do the reset outside of interrupt context). */ + e_warn(drv, "initiating reset to clear Tx work after link loss\n"); adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; } } -- cgit v0.10.2 From b1e50f7ac7fd44f8da05b160a90dddde90b7e8cc Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:53:38 +0000 Subject: ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for the UDP port to timestamp on was moved above the switch statement, but was overwritten to 0 if the ioctl selected one of the V1 filters. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 33cb8c6..6304616 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -644,11 +644,11 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_SYNC_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG; break; case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: -- cgit v0.10.2 From 39dfb71bc03c5a4015d25611c0f1121991d548e6 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 5 Dec 2012 06:51:29 +0000 Subject: ixgbe: Inline Rx PTP descriptor handling This change is meant to inline the Rx PTP descriptor handling. The main motivation is to avoid unnecessary jumps into function calls that we then immediately exit because we are not performing timestamps. The net result of this change is that ixgbe_ptp_rx_tstamp drops from .5% CPU utilization in my performance runs to 0%, and the only value tested is the Rx descriptor which should already be warm in the cache if not stored in a register. Cc: Jacob Keller Signed-off-by: Alexander Duyck Acked-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 2618598..cd4c83b1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -755,9 +755,24 @@ extern void ixgbe_ptp_init(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter); -extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, - union ixgbe_adv_rx_desc *rx_desc, - struct sk_buff *skb); +extern void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb); +static inline void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) + return; + + __ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); + + /* + * Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. + */ + rx_ring->last_rx_timestamp = jiffies; +} + extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr, int cmd); extern void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 6304616..53d2047 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -531,18 +531,16 @@ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) } /** - * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp + * __ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp * @q_vector: structure containing interrupt and ring information - * @rx_desc: the rx descriptor * @skb: particular skb to send timestamp with * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the shhwtstamps structure which * is passed up the network stack */ -void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, - union ixgbe_adv_rx_desc *rx_desc, - struct sk_buff *skb) +void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb) { struct ixgbe_adapter *adapter; struct ixgbe_hw *hw; @@ -552,15 +550,12 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, unsigned long flags; /* we cannot process timestamps on a ring without a q_vector */ - if (!rx_ring->q_vector || !rx_ring->q_vector->adapter) + if (!q_vector || !q_vector->adapter) return; - adapter = rx_ring->q_vector->adapter; + adapter = q_vector->adapter; hw = &adapter->hw; - if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) - return; - /* * Read the tsyncrxctl register afterwards in order to prevent taking an * I/O hit on every packet. @@ -569,12 +564,6 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) return; - /* - * Update the last_rx_timestamp timer in order to enable watchdog check - * for error case of latched timestamp on a dropped packet. - */ - rx_ring->last_rx_timestamp = jiffies; - regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; -- cgit v0.10.2 From b205c0de495ea0a7cd073ff92b47a480c1b24ebe Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Sat, 8 Dec 2012 09:04:25 +0000 Subject: ixgbe: only compile ixgbe_debugfs.o when enabled This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe driver to only compile the file when the config is enabled. This means we can remove the #ifdef inside the ixgbe_debugfs.c file. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index f3a632b..687c83d 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o -ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o ixgbe_debugfs.o\ +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe_ptp.o @@ -40,4 +40,5 @@ ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o +ixgbe-$(CONFIG_DEBUG_FS) += ixgbe_debugfs.o ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index 50aa546..3504686 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -24,9 +24,6 @@ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ - -#ifdef CONFIG_DEBUG_FS - #include #include @@ -277,5 +274,3 @@ void ixgbe_dbg_exit(void) { debugfs_remove_recursive(ixgbe_dbg_root); } - -#endif /* CONFIG_DEBUG_FS */ -- cgit v0.10.2 From 60a1a6800decfc30bd09a84a857ec2f052872ddd Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Tue, 11 Dec 2012 08:26:33 +0000 Subject: ixgbe: Make mailbox ops initialization unconditional There is no actual dependency on initialization of the mailbox ops on whether SR-IOV is enabled or not and it doesn't hurt to go ahead and initialize ops unconditionally. Move the initialization into the device probe so that the mailbox ops are initialized at the time we have the board info necessary to do it. Signed-off-by: Greg Rose CC: Don Dutile Tested-by: Phil Schmitt Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 7e0bb95..2472dc8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7362,7 +7362,14 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } #ifdef CONFIG_PCI_IOV - ixgbe_enable_sriov(adapter, ii); + /* SR-IOV not supported on the 82598 */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + goto skip_sriov; + /* Mailbox */ + ixgbe_init_mbx_params_pf(hw); + memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops)); + ixgbe_enable_sriov(adapter); +skip_sriov: #endif netdev->features = NETIF_F_SG | diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 647734b..029c863 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -44,8 +44,7 @@ #include "ixgbe_sriov.h" #ifdef CONFIG_PCI_IOV -void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, - const struct ixgbe_info *ii) +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; int num_vf_macvlans, i; @@ -128,12 +127,6 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, kcalloc(adapter->num_vfs, sizeof(struct vf_data_storage), GFP_KERNEL); if (adapter->vfinfo) { - /* Now that we're sure SR-IOV is enabled - * and memory allocated set up the mailbox parameters - */ - ixgbe_init_mbx_params_pf(hw); - memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops)); - /* limit trafffic classes based on VFs enabled */ if ((adapter->hw.mac.type == ixgbe_mac_82599EB) && (adapter->num_vfs < 16)) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index 21bc1dd..f693469 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -43,8 +43,7 @@ int ixgbe_ndo_get_vf_config(struct net_device *netdev, void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter); void ixgbe_disable_sriov(struct ixgbe_adapter *adapter); #ifdef CONFIG_PCI_IOV -void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, - const struct ixgbe_info *ii); +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter); #endif static inline void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, -- cgit v0.10.2 From 66dcfd756919ef9d8f564a0696a451574012852c Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Tue, 11 Dec 2012 08:26:38 +0000 Subject: ixgbe: Modularize SR-IOV enablement code In preparation for enable/disable of SR-IOV via the PCI sysfs interface move some core SR-IOV enablement code that would be common to module parameter usage or callback from the PCI bus driver to a separate function so that it can be used by either method. Signed-off-by: Greg Rose CC: Don Dutile Tested-by: Phil Schmitt Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 029c863..8a284ac 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -44,49 +44,11 @@ #include "ixgbe_sriov.h" #ifdef CONFIG_PCI_IOV -void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) +static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; int num_vf_macvlans, i; struct vf_macvlans *mv_list; - int pre_existing_vfs = 0; - - pre_existing_vfs = pci_num_vf(adapter->pdev); - if (!pre_existing_vfs && !adapter->num_vfs) - return; - - /* If there are pre-existing VFs then we have to force - * use of that many because they were not deleted the last - * time someone removed the PF driver. That would have - * been because they were allocated to guest VMs and can't - * be removed. Go ahead and just re-enable the old amount. - * If the user wants to change the number of VFs they can - * use ethtool while making sure no VFs are allocated to - * guest VMs... i.e. the right way. - */ - if (pre_existing_vfs) { - adapter->num_vfs = pre_existing_vfs; - dev_warn(&adapter->pdev->dev, "Virtual Functions already " - "enabled for this device - Please reload all " - "VF drivers to avoid spoofed packet errors\n"); - } else { - int err; - /* - * The 82599 supports up to 64 VFs per physical function - * but this implementation limits allocation to 63 so that - * basic networking resources are still available to the - * physical function. If the user requests greater thn - * 63 VFs then it is an error - reset to default of zero. - */ - adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63); - - err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); - if (err) { - e_err(probe, "Failed to enable PCI sriov: %d\n", err); - adapter->num_vfs = 0; - return; - } - } adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED; e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs); @@ -150,10 +112,62 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) /* enable spoof checking for all VFs */ for (i = 0; i < adapter->num_vfs; i++) adapter->vfinfo[i].spoofchk_enabled = true; + return 0; + } + + return -ENOMEM; +} + +/* Note this function is called when the user wants to enable SR-IOV + * VFs using the now deprecated module parameter + */ +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) +{ + int pre_existing_vfs = 0; + + pre_existing_vfs = pci_num_vf(adapter->pdev); + if (!pre_existing_vfs && !adapter->num_vfs) return; + + if (!pre_existing_vfs) + dev_warn(&adapter->pdev->dev, + "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n"); + + /* If there are pre-existing VFs then we have to force + * use of that many - over ride any module parameter value. + * This may result from the user unloading the PF driver + * while VFs were assigned to guest VMs or because the VFs + * have been created via the new PCI SR-IOV sysfs interface. + */ + if (pre_existing_vfs) { + adapter->num_vfs = pre_existing_vfs; + dev_warn(&adapter->pdev->dev, + "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n"); + } else { + int err; + /* + * The 82599 supports up to 64 VFs per physical function + * but this implementation limits allocation to 63 so that + * basic networking resources are still available to the + * physical function. If the user requests greater thn + * 63 VFs then it is an error - reset to default of zero. + */ + adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63); + + err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); + if (err) { + e_err(probe, "Failed to enable PCI sriov: %d\n", err); + adapter->num_vfs = 0; + return; + } } - /* Oh oh */ + if (!__ixgbe_enable_sriov(adapter)) + return; + + /* If we have gotten to this point then there is no memory available + * to manage the VF devices - print message and bail. + */ e_err(probe, "Unable to allocate memory for VF Data Storage - " "SRIOV disabled\n"); ixgbe_disable_sriov(adapter); -- cgit v0.10.2 From da36b64736cf2552e7fb5109c0255d4af804f5e7 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Tue, 11 Dec 2012 08:26:43 +0000 Subject: ixgbe: Implement PCI SR-IOV sysfs callback operation Implement callbacks in the driver for the new PCI bus driver interface that allows the user to enable/disable SR-IOV VFs in a device via the sysfs interface. Signed-off-by: Greg Rose CC: Don Dutile Tested-by: Phil Schmitt Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index cd4c83b1..8371ae4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -778,5 +778,8 @@ extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, extern void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_reset(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr); +#ifdef CONFIG_PCI_IOV +void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter); +#endif #endif /* _IXGBE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 2472dc8..5e3ed33 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6836,6 +6836,26 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) } #endif /* CONFIG_IXGBE_DCB */ +#ifdef CONFIG_PCI_IOV +void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + rtnl_lock(); +#ifdef CONFIG_IXGBE_DCB + ixgbe_setup_tc(netdev, netdev_get_num_tc(netdev)); +#else + if (netif_running(netdev)) + ixgbe_close(netdev); + ixgbe_clear_interrupt_scheme(adapter); + ixgbe_init_interrupt_scheme(adapter); + if (netif_running(netdev)) + ixgbe_open(netdev); +#endif + rtnl_unlock(); +} + +#endif void ixgbe_do_reset(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -7625,8 +7645,14 @@ static void ixgbe_remove(struct pci_dev *pdev) if (netdev->reg_state == NETREG_REGISTERED) unregister_netdev(netdev); - ixgbe_disable_sriov(adapter); - +#ifdef CONFIG_PCI_IOV + /* + * Only disable SR-IOV on unload if the user specified the now + * deprecated max_vfs module parameter. + */ + if (max_vfs) + ixgbe_disable_sriov(adapter); +#endif ixgbe_clear_interrupt_scheme(adapter); ixgbe_release_hw_control(adapter); @@ -7840,6 +7866,7 @@ static struct pci_driver ixgbe_driver = { .resume = ixgbe_resume, #endif .shutdown = ixgbe_shutdown, + .sriov_configure = ixgbe_pci_sriov_configure, .err_handler = &ixgbe_err_handler }; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 8a284ac..ee3507f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -207,11 +207,12 @@ static bool ixgbe_vfs_are_assigned(struct ixgbe_adapter *adapter) } #endif /* #ifdef CONFIG_PCI_IOV */ -void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) +int ixgbe_disable_sriov(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 gpie; u32 vmdctl; + int rss; /* set num VFs to 0 to prevent access to vfinfo */ adapter->num_vfs = 0; @@ -226,7 +227,7 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) /* if SR-IOV is already disabled then there is nothing to do */ if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) - return; + return 0; #ifdef CONFIG_PCI_IOV /* @@ -236,7 +237,7 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) */ if (ixgbe_vfs_are_assigned(adapter)) { e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n"); - return; + return -EPERM; } /* disable iov and allow time for transactions to clear */ pci_disable_sriov(adapter->pdev); @@ -259,10 +260,94 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED; adapter->ring_feature[RING_F_VMDQ].offset = 0; + rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus()); + adapter->ring_feature[RING_F_RSS].limit = rss; + /* take a breather then clean up driver data */ msleep(100); adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; + return 0; +} + +static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs) +{ +#ifdef CONFIG_PCI_IOV + struct ixgbe_adapter *adapter = pci_get_drvdata(dev); + int err = 0; + int i; + int pre_existing_vfs = pci_num_vf(dev); + + if (pre_existing_vfs && pre_existing_vfs != num_vfs) + err = ixgbe_disable_sriov(adapter); + else if (pre_existing_vfs && pre_existing_vfs == num_vfs) + goto out; + + if (err) + goto err_out; + + /* While the SR-IOV capability structure reports total VFs to be + * 64 we limit the actual number that can be allocated to 63 so + * that some transmit/receive resources can be reserved to the + * PF. The PCI bus driver already checks for other values out of + * range. + */ + if (num_vfs > 63) { + err = -EPERM; + goto err_out; + } + + adapter->num_vfs = num_vfs; + + err = __ixgbe_enable_sriov(adapter); + if (err) + goto err_out; + + for (i = 0; i < adapter->num_vfs; i++) + ixgbe_vf_configuration(dev, (i | 0x10000000)); + + err = pci_enable_sriov(dev, num_vfs); + if (err) { + e_dev_warn("Failed to enable PCI sriov: %d\n", err); + goto err_out; + } + ixgbe_sriov_reinit(adapter); + +out: + return num_vfs; + +err_out: + return err; +#endif + return 0; +} + +static int ixgbe_pci_sriov_disable(struct pci_dev *dev) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(dev); + int err; + u32 current_flags = adapter->flags; + + err = ixgbe_disable_sriov(adapter); + + /* Only reinit if no error and state changed */ + if (!err && current_flags != adapter->flags) { + /* ixgbe_disable_sriov() doesn't clear VMDQ flag */ + adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED; +#ifdef CONFIG_PCI_IOV + ixgbe_sriov_reinit(adapter); +#endif + } + + return err; +} + +int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs) +{ + if (num_vfs == 0) + return ixgbe_pci_sriov_disable(dev); + else + return ixgbe_pci_sriov_enable(dev, num_vfs); } static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index f693469..008f9ce 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -41,10 +41,11 @@ int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting); int ixgbe_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi); void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter); -void ixgbe_disable_sriov(struct ixgbe_adapter *adapter); +int ixgbe_disable_sriov(struct ixgbe_adapter *adapter); #ifdef CONFIG_PCI_IOV void ixgbe_enable_sriov(struct ixgbe_adapter *adapter); #endif +int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs); static inline void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, u16 vid, u16 qos, u32 vf) -- cgit v0.10.2 From 43dc4e0158a343e4f6dc400b925bf4a945f4978b Mon Sep 17 00:00:00 2001 From: Donald Dutile Date: Tue, 11 Dec 2012 08:26:48 +0000 Subject: ixgbe: Limit number of reported VFs to device specific value ixgbe claims it supports 64 VFs in its SRIOV capability structure, but the driver only supports 63. Adjust it so sysfs sriov configuration checking will check with the proper totalvf value. Signed-off-by: Donald Dutile Acked-by: Greg Rose Tested-by: Phil Schmitt Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 5e3ed33..5989b3f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7389,6 +7389,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ixgbe_init_mbx_params_pf(hw); memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops)); ixgbe_enable_sriov(adapter); + pci_sriov_set_totalvfs(pdev, 63); skip_sriov: #endif -- cgit v0.10.2 From b876a744a228308ecf75466831453f0863d253db Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Sat, 19 Jan 2013 06:40:22 +0000 Subject: ixgbevf: Fix link speed message to support 100Mbps The X540 can link at 100Mbps - fix the link speed indicator message to show that value. Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 551e31d..c3db6cd 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -2245,10 +2245,23 @@ static void ixgbevf_watchdog_task(struct work_struct *work) if (link_up) { if (!netif_carrier_ok(netdev)) { + char *link_speed_string; + switch (link_speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + link_speed_string = "10 Gbps"; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + link_speed_string = "1 Gbps"; + break; + case IXGBE_LINK_SPEED_100_FULL: + link_speed_string = "100 Mbps"; + break; + default: + link_speed_string = "unknown speed"; + break; + } dev_info(&adapter->pdev->dev, - "NIC Link is Up, %u Gbps\n", - (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ? - 10 : 1); + "NIC Link is Up, %s\n", link_speed_string); netif_carrier_on(netdev); netif_tx_wake_all_queues(netdev); } -- cgit v0.10.2 From 128e63ef077ef7ccd9c5779bbdce566641714666 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 21 Jan 2013 21:39:26 +0100 Subject: iwlwifi: update copyright Update Copyright notices to 2013. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index 33b3ad2..f41ae79 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.c b/drivers/net/wireless/iwlwifi/dvm/calib.c index de54713..6468de8 100644 --- a/drivers/net/wireless/iwlwifi/dvm/calib.c +++ b/drivers/net/wireless/iwlwifi/dvm/calib.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.h b/drivers/net/wireless/iwlwifi/dvm/calib.h index 2349f39..65e920c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/calib.h +++ b/drivers/net/wireless/iwlwifi/dvm/calib.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h index 0ca99c1..8bce4b0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 72c74af..20806ca 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h index 2653a89..71ea775 100644 --- a/drivers/net/wireless/iwlwifi/dvm/dev.h +++ b/drivers/net/wireless/iwlwifi/dvm/dev.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 8c72be3..15cca2e 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/led.c b/drivers/net/wireless/iwlwifi/dvm/led.c index 844a17f..33c7e15 100644 --- a/drivers/net/wireless/iwlwifi/dvm/led.c +++ b/drivers/net/wireless/iwlwifi/dvm/led.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/led.h b/drivers/net/wireless/iwlwifi/dvm/led.h index b02a853..8749dcf 100644 --- a/drivers/net/wireless/iwlwifi/dvm/led.h +++ b/drivers/net/wireless/iwlwifi/dvm/led.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c index 6ff4660..86ea5f4 100644 --- a/drivers/net/wireless/iwlwifi/dvm/lib.c +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 2da2627..293c7bf 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index a64f361..04b467f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/power.c b/drivers/net/wireless/iwlwifi/dvm/power.c index 518cf37..bd69018 100644 --- a/drivers/net/wireless/iwlwifi/dvm/power.c +++ b/drivers/net/wireless/iwlwifi/dvm/power.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/power.h b/drivers/net/wireless/iwlwifi/dvm/power.h index a2cee7f..7b03e13 100644 --- a/drivers/net/wireless/iwlwifi/dvm/power.h +++ b/drivers/net/wireless/iwlwifi/dvm/power.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index f3dd0da..2eb4277 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.h b/drivers/net/wireless/iwlwifi/dvm/rs.h index ad3aea8..5d83cab 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.h +++ b/drivers/net/wireless/iwlwifi/dvm/rs.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c index cac4f37..e8d5b90 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rx.c +++ b/drivers/net/wireless/iwlwifi/dvm/rx.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portionhelp of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 9a891e6..9fabd26 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c index 610ed220..3a4aa52 100644 --- a/drivers/net/wireless/iwlwifi/dvm/scan.c +++ b/drivers/net/wireless/iwlwifi/dvm/scan.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index bdba954..ab76804 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/testmode.c b/drivers/net/wireless/iwlwifi/dvm/testmode.c index 57b918c..dc6f965 100644 --- a/drivers/net/wireless/iwlwifi/dvm/testmode.c +++ b/drivers/net/wireless/iwlwifi/dvm/testmode.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index b28cfc8..617fca3 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.h b/drivers/net/wireless/iwlwifi/dvm/tt.h index 44c7c8f..9356c4b 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.h +++ b/drivers/net/wireless/iwlwifi/dvm/tt.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index b0aad71..4bd42cd 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index ebec13a..736fe9b 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hw.h b/drivers/net/wireless/iwlwifi/iwl-agn-hw.h index 7960a52..e9975c5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hw.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 864219d..61a7a35 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index b419a1e..df3463a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 42b20b0..b59ec4c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project. * diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c index 70191dd..8f61c71 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2009 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2009 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index dc7e26b..9a0f45e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2009 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2009 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index d3549f4..a7fb5ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.h b/drivers/net/wireless/iwlwifi/iwl-drv.h index 285de5f..594a5c7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.h +++ b/drivers/net/wireless/iwlwifi/iwl-drv.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -66,7 +66,7 @@ /* for all modules */ #define DRV_NAME "iwlwifi" #define IWLWIFI_VERSION "in-tree:" -#define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation" +#define DRV_COPYRIGHT "Copyright(c) 2003-2013 Intel Corporation" #define DRV_AUTHOR "" diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c index 4719866..1ece4c0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h index 555f0eb..074cd07 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c index 27c7da3..ef4806f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-read.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-read.h b/drivers/net/wireless/iwlwifi/iwl-eeprom-read.h index 1337c9d..b2588c5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-read.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-read.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index c646a90..39c79ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index e715640..90873ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index d1a86b6..0bc8b6f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index bff3ac9..dbc0122 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project. * diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index dc47806..5d0ce43 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project. * diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h index d9a86d6..e5e3a79 100644 --- a/drivers/net/wireless/iwlwifi/iwl-modparams.h +++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-notif-wait.c b/drivers/net/wireless/iwlwifi/iwl-notif-wait.c index c61f207..c3affbc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-notif-wait.c +++ b/drivers/net/wireless/iwlwifi/iwl-notif-wait.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-notif-wait.h b/drivers/net/wireless/iwlwifi/iwl-notif-wait.h index 82152310..c2ce764 100644 --- a/drivers/net/wireless/iwlwifi/iwl-notif-wait.h +++ b/drivers/net/wireless/iwlwifi/iwl-notif-wait.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h index c8d9b95..b661564 100644 --- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h +++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index c3a4bb4..f46a3f2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index 1a22611..d06fc55 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-test.h b/drivers/net/wireless/iwlwifi/iwl-test.h index e13ffa8..7fbf4d7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.h +++ b/drivers/net/wireless/iwlwifi/iwl-test.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-testmode.h b/drivers/net/wireless/iwlwifi/iwl-testmode.h index 6ba211b..a963f45 100644 --- a/drivers/net/wireless/iwlwifi/iwl-testmode.h +++ b/drivers/net/wireless/iwlwifi/iwl-testmode.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 0f85eb3..fca5fec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/pcie/1000.c b/drivers/net/wireless/iwlwifi/pcie/1000.c index f8620ec..ff33897 100644 --- a/drivers/net/wireless/iwlwifi/pcie/1000.c +++ b/drivers/net/wireless/iwlwifi/pcie/1000.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/pcie/2000.c b/drivers/net/wireless/iwlwifi/pcie/2000.c index 244019c..e7de331 100644 --- a/drivers/net/wireless/iwlwifi/pcie/2000.c +++ b/drivers/net/wireless/iwlwifi/pcie/2000.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/pcie/5000.c b/drivers/net/wireless/iwlwifi/pcie/5000.c index 83ca403..5096f7c 100644 --- a/drivers/net/wireless/iwlwifi/pcie/5000.c +++ b/drivers/net/wireless/iwlwifi/pcie/5000.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/pcie/6000.c b/drivers/net/wireless/iwlwifi/pcie/6000.c index d4df976..801ff49 100644 --- a/drivers/net/wireless/iwlwifi/pcie/6000.c +++ b/drivers/net/wireless/iwlwifi/pcie/6000.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as diff --git a/drivers/net/wireless/iwlwifi/pcie/cfg.h b/drivers/net/wireless/iwlwifi/pcie/cfg.h index 82152311..3061063 100644 --- a/drivers/net/wireless/iwlwifi/pcie/cfg.h +++ b/drivers/net/wireless/iwlwifi/pcie/cfg.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index c2e141a..5651d31 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 20735a0..21395fa 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 9601303..b694d13 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index c57641e..35685c5 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index a93f067..041127a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. -- cgit v0.10.2 From d13f1862c0ad892eded4cdf633ab32bc993cc1d9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 23 Jan 2013 10:59:29 +0200 Subject: iwlwifi: provide RX page order When the pages are to be used by front-end, it may need to know the page order, provide it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index fca5fec..ce878b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -274,6 +274,7 @@ struct iwl_rx_cmd_buffer { struct page *_page; int _offset; bool _page_stolen; + u32 _rx_page_order; unsigned int truesize; }; @@ -294,6 +295,11 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) return r->_page; } +static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r) +{ + __free_pages(r->_page, r->_rx_page_order); +} + #define MAX_NO_RECLAIM_CMDS 6 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index b694d13..a2f3517 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -594,6 +594,7 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans, int index, cmd_index, err, len; struct iwl_rx_cmd_buffer rxcb = { ._offset = offset, + ._rx_page_order = trans_pcie->rx_page_order, ._page = rxb->page, ._page_stolen = false, .truesize = max_len, -- cgit v0.10.2 From 887da9176e011a044b12ec0deff62df5faadd67c Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 20 Jan 2013 17:32:41 +0200 Subject: mac80211: provide the vif in rssi_callback Since drivers can support several BSS / P2P Client interfaces, the rssi callback needs to inform the driver about the interface teh rssi event relates to. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 02fdcea..f16b81d 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1156,6 +1156,7 @@ static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw) } static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, enum ieee80211_rssi_event rssi_event) { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ece5733..5c98d65 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2633,6 +2633,7 @@ struct ieee80211_ops { int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const struct cfg80211_bitrate_mask *mask); void (*rssi_callback)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, enum ieee80211_rssi_event rssi_event); void (*allow_buffered_frames)(struct ieee80211_hw *hw, diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index d51afbd..e75f5b9 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -845,11 +845,12 @@ static inline void drv_set_rekey_data(struct ieee80211_local *local, } static inline void drv_rssi_callback(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, const enum ieee80211_rssi_event event) { - trace_drv_rssi_callback(local, event); + trace_drv_rssi_callback(local, sdata, event); if (local->ops->rssi_callback) - local->ops->rssi_callback(&local->hw, event); + local->ops->rssi_callback(&local->hw, &sdata->vif, event); trace_drv_return_void(local); } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2d9ef20..344ef7d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2604,12 +2604,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (sig > ifmgd->rssi_max_thold && (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { ifmgd->last_ave_beacon_signal = sig; - drv_rssi_callback(local, RSSI_EVENT_HIGH); + drv_rssi_callback(local, sdata, RSSI_EVENT_HIGH); } else if (sig < ifmgd->rssi_min_thold && (last_sig >= ifmgd->rssi_max_thold || last_sig == 0)) { ifmgd->last_ave_beacon_signal = sig; - drv_rssi_callback(local, RSSI_EVENT_LOW); + drv_rssi_callback(local, sdata, RSSI_EVENT_LOW); } } diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 2a2c2e2..6ca53d6 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1189,23 +1189,26 @@ TRACE_EVENT(drv_set_rekey_data, TRACE_EVENT(drv_rssi_callback, TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, enum ieee80211_rssi_event rssi_event), - TP_ARGS(local, rssi_event), + TP_ARGS(local, sdata, rssi_event), TP_STRUCT__entry( LOCAL_ENTRY + VIF_ENTRY __field(u32, rssi_event) ), TP_fast_assign( LOCAL_ASSIGN; + VIF_ASSIGN; __entry->rssi_event = rssi_event; ), TP_printk( - LOCAL_PR_FMT " rssi_event:%d", - LOCAL_PR_ARG, __entry->rssi_event + LOCAL_PR_FMT VIF_PR_FMT " rssi_event:%d", + LOCAL_PR_ARG, VIF_PR_ARG, __entry->rssi_event ) ); -- cgit v0.10.2 From 8147dc7f54f0f2e13c3b65fd9628994ad576610b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 18 Jan 2013 23:47:05 +0100 Subject: mac80211: fix aggregation state with current drivers For drivers that don't actually flush their queues when aggregation stop with the IEEE80211_AMPDU_TX_STOP_FLUSH or IEEE80211_AMPDU_TX_STOP_FLUSH_CONT reasons is done, like iwlwifi or iwlegacy, mac80211 can then transmit on a TID that the driver still considers busy. This happens in the following way: - IEEE80211_AMPDU_TX_STOP_FLUSH requested - driver marks TID as emptying - mac80211 removes tid_tx data, this can copy packets to the TX pending queues and also let new packets through to the driver - driver gets unexpected TX as it wasn't completely converted to the new API In iwlwifi, this lead to the following warning: WARNING: at drivers/net/wireless/iwlwifi/dvm/tx.c:442 iwlagn_tx_skb+0xc47/0xce0 Tx while agg.state = 4 Modules linked in: [...] Pid: 0, comm: kworker/0:0 Tainted: G W 3.1.0 #1 Call Trace: [] warn_slowpath_common+0x72/0xa0 [] warn_slowpath_fmt+0x33/0x40 [] iwlagn_tx_skb+0xc47/0xce0 [iwldvm] [] iwlagn_mac_tx+0x23/0x40 [iwldvm] [] __ieee80211_tx+0xf6/0x3c0 [mac80211] [] ieee80211_tx+0xd0/0x100 [mac80211] [] ieee80211_xmit+0x96/0xe0 [mac80211] [] ieee80211_subif_start_xmit+0x348/0xc80 [mac80211] [] dev_hard_start_xmit+0x337/0x6d0 [] sch_direct_xmit+0xa9/0x210 [] dev_queue_xmit+0x1b0/0x8e0 Fortunately, solving this problem is easy as the station is being destroyed, so such transmit packets can only happen due to races. Instead of trying to close the race just let the race not reach the drivers by making two changes: 1) remove the explicit aggregation session teardown in the managed mode code, the same thing will be done when the station is removed, in __sta_info_destroy. 2) When aggregation stop with AGG_STOP_DESTROY_STA is requested, leave the tid_tx data around as stopped. It will be cleared and freed in cleanup_single_sta later, but until then any racy packets will be put onto the tid_tx pending queue instead of transmitted which is fine since the station is being removed. Signed-off-by: Johannes Berg diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index e909118..13b7683 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -296,7 +296,7 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, IEEE80211_AMPDU_TX_STOP_FLUSH_CONT, &sta->sta, tid, NULL, 0); WARN_ON_ONCE(ret); - goto remove_tid_tx; + return 0; } if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { @@ -354,12 +354,15 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ } - if (reason == AGG_STOP_DESTROY_STA) { - remove_tid_tx: - spin_lock_bh(&sta->lock); - ieee80211_remove_tid_tx(sta, tid); - spin_unlock_bh(&sta->lock); - } + /* + * In the case of AGG_STOP_DESTROY_STA, the driver won't + * necessarily call ieee80211_stop_tx_ba_cb(), so this may + * seem like we can leave the tid_tx data pending forever. + * This is true, in a way, but "forever" is only until the + * station struct is actually destroyed. In the meantime, + * leaving it around ensures that we don't transmit packets + * to the driver on this TID which might confuse it. + */ return 0; } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 344ef7d..62e8f89 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1487,7 +1487,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; - struct sta_info *sta; u32 changed = 0; ASSERT_MGD_MTX(ifmgd); @@ -1519,14 +1518,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, netif_tx_stop_all_queues(sdata->dev); netif_carrier_off(sdata->dev); - mutex_lock(&local->sta_mtx); - sta = sta_info_get(sdata, ifmgd->bssid); - if (sta) { - set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); - } - mutex_unlock(&local->sta_mtx); - /* * if we want to get out of ps before disassoc (why?) we have * to do it before sending disassoc, as otherwise the null-packet -- cgit v0.10.2 From d437c86baacf265a640dfc462c75941d02c0e153 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 23 Jan 2013 20:33:58 -0800 Subject: ieee80211: define AKM suite selectors type 5, 6 and 7 Reference: IEEE 802.11-2012 8.4.2.27.3 "AKM suites" Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ccf9ee1..11c8bc8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1898,7 +1898,10 @@ enum ieee80211_sa_query_action { /* AKM suite selectors */ #define WLAN_AKM_SUITE_8021X 0x000FAC01 #define WLAN_AKM_SUITE_PSK 0x000FAC02 -#define WLAN_AKM_SUITE_SAE 0x000FAC08 +#define WLAN_AKM_SUITE_8021X_SHA256 0x000FAC05 +#define WLAN_AKM_SUITE_PSK_SHA256 0x000FAC06 +#define WLAN_AKM_SUITE_TDLS 0x000FAC07 +#define WLAN_AKM_SUITE_SAE 0x000FAC08 #define WLAN_AKM_SUITE_FT_OVER_SAE 0x000FAC09 #define WLAN_MAX_KEY_LEN 32 -- cgit v0.10.2 From 296fcba3ba1b8888aa8f5211de1e25a78b47aeee Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 23 Jan 2013 12:18:12 -0800 Subject: mac80211: clean up mesh sta allocation warning This refactoring fixes a "scheduling while atomic" warning when allocating a mesh station entry while holding the RCU read lock. Fix this by creating a new function mesh_sta_info_get(), which correctly handles the locking and returns under RCU. Also move some unnecessarily #ifdefed mesh station init code from sta_info_alloc() to __mesh_sta_info_alloc(). Signed-off-by: Thomas Pedersen [change code flow to make sparse happy] Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 9e04166..ef92d27 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -55,30 +55,6 @@ static inline void mesh_plink_fsm_restart(struct sta_info *sta) sta->plink_retries = 0; } -/* - * Allocate mesh sta entry and insert into station table - */ -static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata, - u8 *hw_addr) -{ - struct sta_info *sta; - - if (sdata->local->num_sta >= MESH_MAX_PLINKS) - return NULL; - - sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL); - if (!sta) - return NULL; - - sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); - sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); - sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED); - - set_sta_flag(sta, WLAN_STA_WME); - - return sta; -} - /** * mesh_set_ht_prot_mode - set correct HT protection mode * @@ -309,52 +285,24 @@ free: return err; } -/** - * mesh_peer_init - initialize new mesh peer and return resulting sta_info - * - * @sdata: local meshif - * @addr: peer's address - * @elems: IEs from beacon or mesh peering frame - * - * call under RCU - */ -static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata, - u8 *addr, - struct ieee802_11_elems *elems) +static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + struct ieee802_11_elems *elems, bool insert) { struct ieee80211_local *local = sdata->local; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); struct ieee80211_supported_band *sband; u32 rates, basic_rates = 0; - struct sta_info *sta; - bool insert = false; sband = local->hw.wiphy->bands[band]; rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates); - sta = sta_info_get(sdata, addr); - if (!sta) { - /* Userspace handles peer allocation when security is enabled */ - if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED) { - cfg80211_notify_new_peer_candidate(sdata->dev, addr, - elems->ie_start, - elems->total_len, - GFP_ATOMIC); - return NULL; - } - - sta = mesh_plink_alloc(sdata, addr); - if (!sta) - return NULL; - insert = true; - } - spin_lock_bh(&sta->lock); sta->last_rx = jiffies; - if (sta->plink_state == NL80211_PLINK_ESTAB) { - spin_unlock_bh(&sta->lock); - return sta; - } + + /* rates and capabilities don't change during peering */ + if (sta->plink_state == NL80211_PLINK_ESTAB) + goto out; sta->sta.supp_rates[band] = rates; if (elems->ht_cap_elem && @@ -379,22 +327,104 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata, if (insert) rate_control_rate_init(sta); +out: spin_unlock_bh(&sta->lock); +} + +static struct sta_info * +__mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *hw_addr) +{ + struct sta_info *sta; - if (insert && sta_info_insert(sta)) + if (sdata->local->num_sta >= MESH_MAX_PLINKS) return NULL; + sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL); + if (!sta) + return NULL; + + sta->plink_state = NL80211_PLINK_LISTEN; + init_timer(&sta->plink_timer); + + sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); + sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); + sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED); + + set_sta_flag(sta, WLAN_STA_WME); + + return sta; +} + +static struct sta_info * +mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *addr, + struct ieee802_11_elems *elems) +{ + struct sta_info *sta = NULL; + + /* Userspace handles peer allocation when security is enabled */ + if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED) + cfg80211_notify_new_peer_candidate(sdata->dev, addr, + elems->ie_start, + elems->total_len, + GFP_KERNEL); + else + sta = __mesh_sta_info_alloc(sdata, addr); + return sta; } +/* + * mesh_sta_info_get - return mesh sta info entry for @addr. + * + * @sdata: local meshif + * @addr: peer's address + * @elems: IEs from beacon or mesh peering frame. + * + * Return existing or newly allocated sta_info under RCU read lock. + * (re)initialize with given IEs. + */ +static struct sta_info * +mesh_sta_info_get(struct ieee80211_sub_if_data *sdata, + u8 *addr, struct ieee802_11_elems *elems) __acquires(RCU) +{ + struct sta_info *sta = NULL; + + rcu_read_lock(); + sta = sta_info_get(sdata, addr); + if (sta) { + mesh_sta_info_init(sdata, sta, elems, false); + } else { + rcu_read_unlock(); + /* can't run atomic */ + sta = mesh_sta_info_alloc(sdata, addr, elems); + if (!sta) { + rcu_read_lock(); + return NULL; + } + + if (sta_info_insert_rcu(sta)) + return NULL; + } + + return sta; +} + +/* + * mesh_neighbour_update - update or initialize new mesh neighbor. + * + * @sdata: local meshif + * @addr: peer's address + * @elems: IEs from beacon or mesh peering frame + * + * Initiates peering if appropriate. + */ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, u8 *hw_addr, struct ieee802_11_elems *elems) { struct sta_info *sta; - rcu_read_lock(); - sta = mesh_peer_init(sdata, hw_addr, elems); + sta = mesh_sta_info_get(sdata, hw_addr, elems); if (!sta) goto out; @@ -632,6 +662,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len == 8)) memcpy(&llid, PLINK_GET_PLID(elems.peering), 2); + /* WARNING: Only for sta pointer, is dropped & re-acquired */ rcu_read_lock(); sta = sta_info_get(sdata, mgmt->sa); @@ -735,8 +766,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } if (event == OPN_ACPT) { + rcu_read_unlock(); /* allocate sta entry if necessary and update info */ - sta = mesh_peer_init(sdata, mgmt->sa, &elems); + sta = mesh_sta_info_get(sdata, mgmt->sa, &elems); if (!sta) { mpl_dbg(sdata, "Mesh plink: failed to init peer!\n"); rcu_read_unlock(); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 9d864ed..227233c 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -380,11 +380,6 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); -#ifdef CONFIG_MAC80211_MESH - sta->plink_state = NL80211_PLINK_LISTEN; - init_timer(&sta->plink_timer); -#endif - return sta; } -- cgit v0.10.2 From f68d776a04bfcebc426f605c4440ffe38c583a4b Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 23 Jan 2013 12:18:13 -0800 Subject: mac80211: support mesh rate updates An existing mesh station entry may change its rate capabilities, so call rate_control_rate_update() to notify the rate control. Signed-off-by: Thomas Pedersen [fix compilation] Signed-off-by: Johannes Berg diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index e75f5b9..434b3c4 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -569,7 +569,8 @@ static inline void drv_sta_rc_update(struct ieee80211_local *local, check_sdata_in_driver(sdata); WARN_ON(changed & IEEE80211_RC_SUPP_RATES_CHANGED && - sdata->vif.type != NL80211_IFTYPE_ADHOC); + (sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT)); trace_drv_sta_rc_update(local, sdata, sta, changed); if (local->ops->sta_rc_update) diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index ef92d27..4e1d406 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -292,7 +292,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); struct ieee80211_supported_band *sband; - u32 rates, basic_rates = 0; + u32 rates, basic_rates = 0, changed = 0; sband = local->hw.wiphy->bands[band]; rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates); @@ -304,6 +304,8 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (sta->plink_state == NL80211_PLINK_ESTAB) goto out; + if (sta->sta.supp_rates[band] != rates) + changed |= IEEE80211_RC_SUPP_RATES_CHANGED; sta->sta.supp_rates[band] = rates; if (elems->ht_cap_elem && sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) @@ -322,11 +324,15 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, elems->ht_operation, &chandef); + if (sta->ch_width != chandef.width) + changed |= IEEE80211_RC_BW_CHANGED; sta->ch_width = chandef.width; } if (insert) rate_control_rate_init(sta); + else + rate_control_rate_update(local, sband, sta, changed); out: spin_unlock_bh(&sta->lock); } -- cgit v0.10.2 From 683d41ae6755e6ae297ec09603c229795ab9566e Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 23 Jan 2013 15:15:57 +0100 Subject: cfg80211: fix channel check in cfg80211_can_use_iftype_chan In commit "cfg80211: check radar interface combinations" a regression was introduced which might lead to NULL dereference if the argument chan = NULL, which might happen in IBSS/wext case (and probably others). Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index 1c2795d..d7873c7 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1212,7 +1212,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, case NL80211_IFTYPE_MESH_POINT: case NL80211_IFTYPE_P2P_GO: case NL80211_IFTYPE_WDS: - radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR); + radar_required = !!(chan && + (chan->flags & IEEE80211_CHAN_RADAR)); break; case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_STATION: -- cgit v0.10.2 From 782d2673655c05a1c0335fe0ee4cb62c23bcc231 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 18 Jan 2013 21:21:31 +0100 Subject: mac80211: remove redundant check There's no need to have two checks for "associated" in ieee80211_sta_restart(), make the first one locked to not race (unlikely at this point during resume) and remove the second check. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 62e8f89..5913fb9 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3156,23 +3156,22 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - if (!ifmgd->associated) + mutex_lock(&ifmgd->mtx); + if (!ifmgd->associated) { + mutex_unlock(&ifmgd->mtx); return; + } if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; - mutex_lock(&ifmgd->mtx); - if (ifmgd->associated) { - mlme_dbg(sdata, - "driver requested disconnect after resume\n"); - ieee80211_sta_connection_lost(sdata, - ifmgd->associated->bssid, - WLAN_REASON_UNSPECIFIED); - mutex_unlock(&ifmgd->mtx); - return; - } + mlme_dbg(sdata, "driver requested disconnect after resume\n"); + ieee80211_sta_connection_lost(sdata, + ifmgd->associated->bssid, + WLAN_REASON_UNSPECIFIED); mutex_unlock(&ifmgd->mtx); + return; } + mutex_unlock(&ifmgd->mtx); if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running)) add_timer(&ifmgd->timer); -- cgit v0.10.2 From 97c7952792018589640ecb3e62e1ab8f06005546 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 16:43:48 +0100 Subject: iwlwifi: include debugfs.h The iwl-op-mode.h file uses a struct dentry for debugfs so should include debugfs.h. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h index b661564..dc79258 100644 --- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h +++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h @@ -63,6 +63,8 @@ #ifndef __iwl_op_mode_h__ #define __iwl_op_mode_h__ +#include + struct iwl_op_mode; struct iwl_trans; struct sk_buff; -- cgit v0.10.2 From fe80123d83d1f9abca426914f768048e601f54db Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 Jan 2013 14:14:33 +0000 Subject: mac80211: avoid a build warning gcc cannot prove that the value of sdata->vif.type does not change between the switch() statement and the second comparison to NL80211_IFTYPE_AP, causing a harmless warning. Slightly reordering the code makes the warning go away with no functional change. Without this patch, building ARM at91sam9g45_defconfig with gcc-4.6 results in: net/mac80211/tx.c: In function 'ieee80211_subif_start_xmit': net/mac80211/tx.c:1797:22: warning: 'chanctx_conf' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann Cc: Johannes Berg Cc: "John W. Linville" Cc: "David S. Miller" Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 0d73816..b4a8414 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1784,16 +1784,16 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, break; /* fall through */ case NL80211_IFTYPE_AP: + if (sdata->vif.type == NL80211_IFTYPE_AP) + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + if (!chanctx_conf) + goto fail_rcu; fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); /* DA BSSID SA */ memcpy(hdr.addr1, skb->data, ETH_ALEN); memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); hdrlen = 24; - if (sdata->vif.type == NL80211_IFTYPE_AP) - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (!chanctx_conf) - goto fail_rcu; band = chanctx_conf->def.chan->band; break; case NL80211_IFTYPE_WDS: -- cgit v0.10.2 From 6d45a74b1f2e42e41c9931bfb35cdb789d0bb3ea Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 18 Jan 2013 11:18:44 +0530 Subject: cfg80211: Move the definition of struct mac_address up struct mac_address will be used by ACL related configuration ops. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 970da44..1830337 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -527,6 +527,10 @@ struct cfg80211_beacon_data { size_t probe_resp_len; }; +struct mac_address { + u8 addr[ETH_ALEN]; +}; + /** * struct cfg80211_ap_settings - AP configuration * @@ -2181,10 +2185,6 @@ struct ieee80211_iface_combination { u8 radar_detect_widths; }; -struct mac_address { - u8 addr[ETH_ALEN]; -}; - struct ieee80211_txrx_stypes { u16 tx, rx; }; -- cgit v0.10.2 From 77765eaf5cfb6b8dd98ec8b54b411d74ff6095f1 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 18 Jan 2013 11:18:45 +0530 Subject: cfg80211/nl80211: add API for MAC address ACLs Add API to enable drivers to implement MAC address based access control in AP/P2P GO mode. Capable drivers advertise this capability by setting the maximum number of MAC addresses in such a list in wiphy->max_acl_mac_addrs. An initial ACL may be given to the NL80211_CMD_START_AP command and/or changed later with NL80211_CMD_SET_MAC_ACL. Black- and whitelists are supported, but not simultaneously. Signed-off-by: Vasanthakumar Thiagarajan [rewrite commit log, many cleanups] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1830337..36e076e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -532,6 +532,22 @@ struct mac_address { }; /** + * struct cfg80211_acl_data - Access control list data + * + * @acl_policy: ACL policy to be applied on the station's + entry specified by mac_addr + * @n_acl_entries: Number of MAC address entries passed + * @mac_addrs: List of MAC addresses of stations to be used for ACL + */ +struct cfg80211_acl_data { + enum nl80211_acl_policy acl_policy; + int n_acl_entries; + + /* Keep it last */ + struct mac_address mac_addrs[]; +}; + +/** * struct cfg80211_ap_settings - AP configuration * * Used to configure an AP interface. @@ -550,6 +566,8 @@ struct mac_address { * @inactivity_timeout: time in seconds to determine station's inactivity. * @p2p_ctwindow: P2P CT Window * @p2p_opp_ps: P2P opportunistic PS + * @acl: ACL configuration used by the drivers which has support for + * MAC address based access control */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -566,6 +584,7 @@ struct cfg80211_ap_settings { int inactivity_timeout; u8 p2p_ctwindow; bool p2p_opp_ps; + const struct cfg80211_acl_data *acl; }; /** @@ -1800,6 +1819,13 @@ struct cfg80211_gtk_rekey_data { * * @start_p2p_device: Start the given P2P device. * @stop_p2p_device: Stop the given P2P device. + * + * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode. + * Parameters include ACL policy, an array of MAC address of stations + * and the number of MAC addresses. If there is already a list in driver + * this new list replaces the existing one. Driver has to clear its ACL + * when number of MAC addresses entries is passed as 0. Drivers which + * advertise the support for MAC based ACL have to implement this callback. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2020,6 +2046,9 @@ struct cfg80211_ops { struct wireless_dev *wdev); void (*stop_p2p_device)(struct wiphy *wiphy, struct wireless_dev *wdev); + + int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, + const struct cfg80211_acl_data *params); }; /* @@ -2325,6 +2354,9 @@ struct wiphy_wowlan_support { * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden. * If null, then none can be over-ridden. + * + * @max_acl_mac_addrs: Maximum number of MAC addresses that the device + * supports for ACL. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2346,6 +2378,8 @@ struct wiphy { /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; + u16 max_acl_mac_addrs; + u32 flags, features; u32 ap_sme_capa; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e6eeb4b..5b7dbc1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -170,7 +170,8 @@ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP @@ -586,6 +587,16 @@ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames * for IBSS or MESH vif. * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -736,6 +747,8 @@ enum nl80211_commands { NL80211_CMD_SET_MCAST_RATE, + NL80211_CMD_SET_MAC_ACL, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1313,6 +1326,16 @@ enum nl80211_commands { * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode * defined in &enum nl80211_mesh_power_mode. * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1585,6 +1608,12 @@ enum nl80211_attrs { NL80211_ATTR_LOCAL_MESH_POWER_MODE, + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3248,7 +3277,7 @@ enum nl80211_probe_resp_offload_support_attr { * enum nl80211_connect_failed_reason - connection request failed reasons * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be * handled by the AP is reached. - * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. */ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_MAX_CLIENTS, @@ -3276,4 +3305,22 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_AP = 1<<2, }; +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/net/wireless/core.c b/net/wireless/core.c index 0e702cd..ce82724 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -478,6 +478,11 @@ int wiphy_register(struct wiphy *wiphy) ETH_ALEN))) return -EINVAL; + if (WARN_ON(wiphy->max_acl_mac_addrs && + (!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) || + !rdev->ops->set_mac_acl))) + return -EINVAL; + if (wiphy->addresses) memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 33de803..b5978ab 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -365,6 +365,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_SCAN_FLAGS] = { .type = NLA_U32 }, [NL80211_ATTR_P2P_CTWINDOW] = { .type = NLA_U8 }, [NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 }, + [NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 }, + [NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED }, }; /* policy for the key attributes */ @@ -1268,6 +1270,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.ht_capa_mod_mask)) goto nla_put_failure; + if (dev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME && + dev->wiphy.max_acl_mac_addrs && + nla_put_u32(msg, NL80211_ATTR_MAC_ACL_MAX, + dev->wiphy.max_acl_mac_addrs)) + goto nla_put_failure; + return genlmsg_end(msg, hdr); nla_put_failure: @@ -2491,6 +2499,97 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) return err; } +/* This function returns an error or the number of nested attributes */ +static int validate_acl_mac_addrs(struct nlattr *nl_attr) +{ + struct nlattr *attr; + int n_entries = 0, tmp; + + nla_for_each_nested(attr, nl_attr, tmp) { + if (nla_len(attr) != ETH_ALEN) + return -EINVAL; + + n_entries++; + } + + return n_entries; +} + +/* + * This function parses ACL information and allocates memory for ACL data. + * On successful return, the calling function is responsible to free the + * ACL buffer returned by this function. + */ +static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy, + struct genl_info *info) +{ + enum nl80211_acl_policy acl_policy; + struct nlattr *attr; + struct cfg80211_acl_data *acl; + int i = 0, n_entries, tmp; + + if (!wiphy->max_acl_mac_addrs) + return ERR_PTR(-EOPNOTSUPP); + + if (!info->attrs[NL80211_ATTR_ACL_POLICY]) + return ERR_PTR(-EINVAL); + + acl_policy = nla_get_u32(info->attrs[NL80211_ATTR_ACL_POLICY]); + if (acl_policy != NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED && + acl_policy != NL80211_ACL_POLICY_DENY_UNLESS_LISTED) + return ERR_PTR(-EINVAL); + + if (!info->attrs[NL80211_ATTR_MAC_ADDRS]) + return ERR_PTR(-EINVAL); + + n_entries = validate_acl_mac_addrs(info->attrs[NL80211_ATTR_MAC_ADDRS]); + if (n_entries < 0) + return ERR_PTR(n_entries); + + if (n_entries > wiphy->max_acl_mac_addrs) + return ERR_PTR(-ENOTSUPP); + + acl = kzalloc(sizeof(*acl) + (sizeof(struct mac_address) * n_entries), + GFP_KERNEL); + if (!acl) + return ERR_PTR(-ENOMEM); + + nla_for_each_nested(attr, info->attrs[NL80211_ATTR_MAC_ADDRS], tmp) { + memcpy(acl->mac_addrs[i].addr, nla_data(attr), ETH_ALEN); + i++; + } + + acl->n_acl_entries = n_entries; + acl->acl_policy = acl_policy; + + return acl; +} + +static int nl80211_set_mac_acl(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct cfg80211_acl_data *acl; + int err; + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) + return -EOPNOTSUPP; + + if (!dev->ieee80211_ptr->beacon_interval) + return -EINVAL; + + acl = parse_acl_data(&rdev->wiphy, info); + if (IS_ERR(acl)) + return PTR_ERR(acl); + + err = rdev_set_mac_acl(rdev, dev, acl); + + kfree(acl); + + return err; +} + static int nl80211_parse_beacon(struct genl_info *info, struct cfg80211_beacon_data *bcn) { @@ -2734,6 +2833,12 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) if (err) return err; + if (info->attrs[NL80211_ATTR_ACL_POLICY]) { + params.acl = parse_acl_data(&rdev->wiphy, info); + if (IS_ERR(params.acl)) + return PTR_ERR(params.acl); + } + err = rdev_start_ap(rdev, dev, ¶ms); if (!err) { wdev->preset_chandef = params.chandef; @@ -2742,6 +2847,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) wdev->ssid_len = params.ssid_len; memcpy(wdev->ssid, params.ssid, wdev->ssid_len); } + + kfree(params.acl); + return err; } @@ -7876,6 +7984,14 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_SET_MAC_ACL, + .doit = nl80211_set_mac_acl, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 6c0c819..422d382 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -875,4 +875,16 @@ static inline void rdev_stop_p2p_device(struct cfg80211_registered_device *rdev, rdev->ops->stop_p2p_device(&rdev->wiphy, wdev); trace_rdev_return_void(&rdev->wiphy); } + +static inline int rdev_set_mac_acl(struct cfg80211_registered_device *rdev, + struct net_device *dev, + struct cfg80211_acl_data *params) +{ + int ret; + + trace_rdev_set_mac_acl(&rdev->wiphy, dev, params); + ret = rdev->ops->set_mac_acl(&rdev->wiphy, dev, params); + trace_rdev_return_int(&rdev->wiphy, ret); + return ret; +} #endif /* __CFG80211_RDEV_OPS */ diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 2134576..8bc5531 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1767,6 +1767,24 @@ DEFINE_EVENT(wiphy_wdev_evt, rdev_stop_p2p_device, TP_ARGS(wiphy, wdev) ); +TRACE_EVENT(rdev_set_mac_acl, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_acl_data *params), + TP_ARGS(wiphy, netdev, params), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + __field(u32, acl_policy) + ), + TP_fast_assign( + WIPHY_ASSIGN; + WIPHY_ASSIGN; + __entry->acl_policy = params->acl_policy; + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d", + WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->acl_policy) +); + /************************************************************* * cfg80211 exported functions traces * *************************************************************/ -- cgit v0.10.2 From 77136836aef2c7ce9745e765c1e51a14e3933931 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 21:00:00 +0200 Subject: can: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block This patch adds an 'if CAN...endif' Block around all CAN symbols in net/can/Kconfig. So the 'depends on CAN' dependencies can be removed. Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b56bd9e..8088d8f 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -1,9 +1,7 @@ menu "CAN Device Drivers" - depends on CAN config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" - depends on CAN ---help--- Similar to the network loopback devices, vcan offers a virtual local CAN interface. @@ -13,7 +11,6 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" - depends on CAN ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL @@ -33,7 +30,6 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" - depends on CAN default y ---help--- Enables the common framework for platform CAN drivers with Netlink @@ -133,7 +129,6 @@ source "drivers/net/can/softing/Kconfig" config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" - depends on CAN ---help--- Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having diff --git a/net/can/Kconfig b/net/can/Kconfig index 0320069..0435fc4 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -16,9 +16,10 @@ menuconfig CAN If you want CAN support you should say Y here and also to the specific driver for your controller(s) below. +if CAN + config CAN_RAW tristate "Raw CAN Protocol (raw access with CAN-ID filtering)" - depends on CAN default N ---help--- The raw CAN protocol option offers access to the CAN bus via @@ -29,7 +30,6 @@ config CAN_RAW config CAN_BCM tristate "Broadcast Manager CAN Protocol (with content filtering)" - depends on CAN default N ---help--- The Broadcast Manager offers content filtering, timeout monitoring, @@ -42,7 +42,6 @@ config CAN_BCM config CAN_GW tristate "CAN Gateway/Router (with netlink configuration)" - depends on CAN default N ---help--- The CAN Gateway/Router is used to route (and modify) CAN frames. @@ -53,3 +52,5 @@ config CAN_GW by the netlink configuration interface known e.g. from iptables. source "drivers/net/can/Kconfig" + +endif -- cgit v0.10.2 From 6586c5d74e8c2883ed1246aae81275efb777c088 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 21:04:13 +0200 Subject: can: Kconfig: convert 'depends on CAN_DEV' into 'if CAN_DEV...endif' block This patch adds an 'if CAN_DEV...endif' Block around the CAN driver symbols in drivers/net/can/Kconfig. So the 'depends on CAN' dependencies can be removed. Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 8088d8f..0c5a656 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -36,9 +36,10 @@ config CAN_DEV support. This is the standard library for CAN drivers. If unsure, say Y. +if CAN_DEV + config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" - depends on CAN_DEV default y ---help--- If enabled, CAN bit-timing parameters will be calculated for the @@ -52,13 +53,13 @@ config CAN_CALC_BITTIMING config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN_DEV && (ARCH_AT91SAM9263 || ARCH_AT91SAM9X5) + depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263 and AT91SAM9X5 processors. config CAN_TI_HECC - depends on CAN_DEV && ARCH_OMAP3 + depends on ARCH_OMAP3 tristate "TI High End CAN Controller" ---help--- Driver for TI HECC (High End CAN Controller) module found on many @@ -66,12 +67,12 @@ config CAN_TI_HECC config CAN_MCP251X tristate "Microchip MCP251x SPI CAN controllers" - depends on CAN_DEV && SPI && HAS_DMA + depends on SPI && HAS_DMA ---help--- Driver for the Microchip MCP251x SPI CAN controllers. config CAN_BFIN - depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x) + depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x tristate "Analog Devices Blackfin on-chip CAN" ---help--- Driver for the Analog Devices Blackfin on-chip CAN controllers @@ -81,7 +82,7 @@ config CAN_BFIN config CAN_JANZ_ICAN3 tristate "Janz VMOD-ICAN3 Intelligent CAN controller" - depends on CAN_DEV && MFD_JANZ_CMODIO + depends on MFD_JANZ_CMODIO ---help--- Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which connects to a MODULbus carrier board. @@ -94,13 +95,13 @@ config HAVE_CAN_FLEXCAN config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" - depends on CAN_DEV && HAVE_CAN_FLEXCAN + depends on HAVE_CAN_FLEXCAN ---help--- Say Y here if you want to support for Freescale FlexCAN. config PCH_CAN tristate "Intel EG20T PCH CAN controller" - depends on CAN_DEV && PCI + depends on PCI ---help--- This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which is an IOH for x86 embedded processor (Intel Atom E6xx series). @@ -108,7 +109,7 @@ config PCH_CAN config CAN_GRCAN tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices" - depends on CAN_DEV && OF + depends on OF ---help--- Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN. Note that the driver supports little endian, even though little @@ -127,6 +128,8 @@ source "drivers/net/can/usb/Kconfig" source "drivers/net/can/softing/Kconfig" +endif + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" ---help--- diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig index 3b83baf..61ffc12 100644 --- a/drivers/net/can/c_can/Kconfig +++ b/drivers/net/can/c_can/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_C_CAN tristate "Bosch C_CAN/D_CAN devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_C_CAN diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig index 22c07a8..6a9a5ba 100644 --- a/drivers/net/can/cc770/Kconfig +++ b/drivers/net/can/cc770/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_CC770 tristate "Bosch CC770 and Intel AN82527 devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_CC770 diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig index d387069..f19be52 100644 --- a/drivers/net/can/mscan/Kconfig +++ b/drivers/net/can/mscan/Kconfig @@ -1,5 +1,5 @@ config CAN_MSCAN - depends on CAN_DEV && (PPC || M68K) + depends on PPC || M68K tristate "Support for Freescale MSCAN based chips" ---help--- The Motorola Scalable Controller Area Network (MSCAN) definition diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 92f73c7..1bed54f 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_SJA1000 tristate "Philips/NXP SJA1000 devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_SJA1000 diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 5de46a9..96b6fe1 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -1,6 +1,6 @@ config CAN_SOFTING tristate "Softing Gmbh CAN generic support" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM ---help--- Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index a4e4bee..acba33d 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -1,5 +1,5 @@ menu "CAN USB interfaces" - depends on USB && CAN_DEV + depends on USB config CAN_EMS_USB tristate "EMS CPC-USB/ARM7 CAN/USB interface" -- cgit v0.10.2 From f66b0301fcab28f90c5c9249590a52239a005c5a Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 21:22:27 +0200 Subject: can: Kconfig: switch on all CAN protocolls by default This patch enables all basic CAN protocol by default. Signed-off-by: Marc Kleine-Budde diff --git a/net/can/Kconfig b/net/can/Kconfig index 0435fc4..a15c0e0 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -20,7 +20,7 @@ if CAN config CAN_RAW tristate "Raw CAN Protocol (raw access with CAN-ID filtering)" - default N + default y ---help--- The raw CAN protocol option offers access to the CAN bus via the BSD socket API. You probably want to use the raw socket in @@ -30,7 +30,7 @@ config CAN_RAW config CAN_BCM tristate "Broadcast Manager CAN Protocol (with content filtering)" - default N + default y ---help--- The Broadcast Manager offers content filtering, timeout monitoring, sending of RTR frames, and cyclic CAN messages without permanent user @@ -42,7 +42,7 @@ config CAN_BCM config CAN_GW tristate "CAN Gateway/Router (with netlink configuration)" - default N + default y ---help--- The CAN Gateway/Router is used to route (and modify) CAN frames. It is based on the PF_CAN core infrastructure for msg filtering and -- cgit v0.10.2 From af5fd6da40412002bd2ba3293fd11fe862e15d80 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 9 Aug 2012 09:32:09 +0200 Subject: can: sja1000: correct indention of Kconfig help text This patch changes the indention of the Kconfig help text to the default + 2 . Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 1bed54f..b39ca5b 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -99,11 +99,11 @@ config CAN_TSCAN1 tristate "TS-CAN1 PC104 boards" depends on ISA help - This driver is for Technologic Systems' TSCAN-1 PC104 boards. - http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 - The driver supports multiple boards and automatically configures them: - PLD IO base addresses are read from jumpers JP1 and JP2, - IRQ numbers are read from jumpers JP4 and JP5, - SJA1000 IO base addresses are chosen heuristically (first that works). + This driver is for Technologic Systems' TSCAN-1 PC104 boards. + http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 + The driver supports multiple boards and automatically configures them: + PLD IO base addresses are read from jumpers JP1 and JP2, + IRQ numbers are read from jumpers JP4 and JP5, + SJA1000 IO base addresses are chosen heuristically (first that works). endif -- cgit v0.10.2 From 0024d8ad1639e32d717445c69ca813fd19c2a91c Mon Sep 17 00:00:00 2001 From: Bernd Krumboeck Date: Sat, 19 Jan 2013 07:30:45 +0100 Subject: can: usb_8dev: Add support for USB2CAN interface from 8 devices Add device driver for USB2CAN interface from "8 devices" (http://www.8devices.com). changes since v10: * small cleanups changes since v9: * fixed syslog messages * fixed crc error number * increased MAX_RX_URBS and MAX_TX_URBS changes since v8: * remove all sysfs files changes since v7: * add sysfs documentation * fix minor styling issue * fixed can state for passive mode * changed handling for crc errors changes since v6: * changed some variable types to big endian equivalent * small cleanups changes since v5: * unlock mutex on error changes since v4: * removed FSF address * renamed struct usb_8dev * removed unused variable free_slots * replaced some _to_cpu functions with pointer equivalent * fix return value for usb_8dev_set_mode * handle can errors with separate function * fix overrun error handling * rewrite error handling for usb_8dev_start_xmit * fix urb submit in usb_8dev_start * various small fixes Acked-by: Wolfgang Grandegger Tested-by: Oliver Hartkopp Signed-off-by: Bernd Krumboeck Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index acba33d..fc96a3d 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -48,4 +48,10 @@ config CAN_PEAK_USB This driver supports the PCAN-USB and PCAN-USB Pro adapters from PEAK-System Technik (http://www.peak-system.com). +config CAN_8DEV_USB + tristate "8 devices USB2CAN interface" + ---help--- + This driver supports the USB2CAN interface + from 8 devices (http://www.8devices.com). + endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index 80a2ee4..becef46 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/ +obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c new file mode 100644 index 0000000..a9e73fa --- /dev/null +++ b/drivers/net/can/usb/usb_8dev.c @@ -0,0 +1,1022 @@ +/* + * CAN driver for "8 devices" USB2CAN converter + * + * Copyright (C) 2012 Bernd Krumboeck (krumboeck@universalnet.at) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. + * + * This driver is inspired by the 3.2.0 version of drivers/net/can/usb/ems_usb.c + * and drivers/net/can/usb/esd_usb2.c + * + * Many thanks to Gerhard Bertelsmann (info@gerhard-bertelsmann.de) + * for testing and fixing this driver. Also many thanks to "8 devices", + * who were very cooperative and answered my questions. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* driver constants */ +#define MAX_RX_URBS 20 +#define MAX_TX_URBS 20 +#define RX_BUFFER_SIZE 64 + +/* vendor and product id */ +#define USB_8DEV_VENDOR_ID 0x0483 +#define USB_8DEV_PRODUCT_ID 0x1234 + +/* endpoints */ +enum usb_8dev_endpoint { + USB_8DEV_ENDP_DATA_RX = 1, + USB_8DEV_ENDP_DATA_TX, + USB_8DEV_ENDP_CMD_RX, + USB_8DEV_ENDP_CMD_TX +}; + +/* device CAN clock */ +#define USB_8DEV_ABP_CLOCK 32000000 + +/* setup flags */ +#define USB_8DEV_SILENT 0x01 +#define USB_8DEV_LOOPBACK 0x02 +#define USB_8DEV_DISABLE_AUTO_RESTRANS 0x04 +#define USB_8DEV_STATUS_FRAME 0x08 + +/* commands */ +enum usb_8dev_cmd { + USB_8DEV_RESET = 1, + USB_8DEV_OPEN, + USB_8DEV_CLOSE, + USB_8DEV_SET_SPEED, + USB_8DEV_SET_MASK_FILTER, + USB_8DEV_GET_STATUS, + USB_8DEV_GET_STATISTICS, + USB_8DEV_GET_SERIAL, + USB_8DEV_GET_SOFTW_VER, + USB_8DEV_GET_HARDW_VER, + USB_8DEV_RESET_TIMESTAMP, + USB_8DEV_GET_SOFTW_HARDW_VER +}; + +/* command options */ +#define USB_8DEV_BAUD_MANUAL 0x09 +#define USB_8DEV_CMD_START 0x11 +#define USB_8DEV_CMD_END 0x22 + +#define USB_8DEV_CMD_SUCCESS 0 +#define USB_8DEV_CMD_ERROR 255 + +#define USB_8DEV_CMD_TIMEOUT 1000 + +/* frames */ +#define USB_8DEV_DATA_START 0x55 +#define USB_8DEV_DATA_END 0xAA + +#define USB_8DEV_TYPE_CAN_FRAME 0 +#define USB_8DEV_TYPE_ERROR_FRAME 3 + +#define USB_8DEV_EXTID 0x01 +#define USB_8DEV_RTR 0x02 +#define USB_8DEV_ERR_FLAG 0x04 + +/* status */ +#define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */ +#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occured when sending */ +#define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */ +#define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */ +#define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */ +#define USB_8DEV_STATUSMSG_STUFF 0x20 /* Stuff Error */ +#define USB_8DEV_STATUSMSG_FORM 0x21 /* Form Error */ +#define USB_8DEV_STATUSMSG_ACK 0x23 /* Ack Error */ +#define USB_8DEV_STATUSMSG_BIT0 0x24 /* Bit1 Error */ +#define USB_8DEV_STATUSMSG_BIT1 0x25 /* Bit0 Error */ +#define USB_8DEV_STATUSMSG_CRC 0x27 /* CRC Error */ + +#define USB_8DEV_RP_MASK 0x7F /* Mask for Receive Error Bit */ + + +/* table of devices that work with this driver */ +static const struct usb_device_id usb_8dev_table[] = { + { USB_DEVICE(USB_8DEV_VENDOR_ID, USB_8DEV_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_8dev_table); + +struct usb_8dev_tx_urb_context { + struct usb_8dev_priv *priv; + + u32 echo_index; + u8 dlc; +}; + +/* Structure to hold all of our device specific stuff */ +struct usb_8dev_priv { + struct can_priv can; /* must be the first member */ + + struct sk_buff *echo_skb[MAX_TX_URBS]; + + struct usb_device *udev; + struct net_device *netdev; + + atomic_t active_tx_urbs; + struct usb_anchor tx_submitted; + struct usb_8dev_tx_urb_context tx_contexts[MAX_TX_URBS]; + + struct usb_anchor rx_submitted; + + struct can_berr_counter bec; + + u8 *cmd_msg_buffer; + + struct mutex usb_8dev_cmd_lock; + +}; + +/* tx frame */ +struct __packed usb_8dev_tx_msg { + u8 begin; + u8 flags; /* RTR and EXT_ID flag */ + __be32 id; /* upper 3 bits not used */ + u8 dlc; /* data length code 0-8 bytes */ + u8 data[8]; /* 64-bit data */ + u8 end; +}; + +/* rx frame */ +struct __packed usb_8dev_rx_msg { + u8 begin; + u8 type; /* frame type */ + u8 flags; /* RTR and EXT_ID flag */ + __be32 id; /* upper 3 bits not used */ + u8 dlc; /* data length code 0-8 bytes */ + u8 data[8]; /* 64-bit data */ + __be32 timestamp; /* 32-bit timestamp */ + u8 end; +}; + +/* command frame */ +struct __packed usb_8dev_cmd_msg { + u8 begin; + u8 channel; /* unkown - always 0 */ + u8 command; /* command to execute */ + u8 opt1; /* optional parameter / return value */ + u8 opt2; /* optional parameter 2 */ + u8 data[10]; /* optional parameter and data */ + u8 end; +}; + +static int usb_8dev_send_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size) +{ + int actual_length; + + return usb_bulk_msg(priv->udev, + usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_TX), + msg, size, &actual_length, USB_8DEV_CMD_TIMEOUT); +} + +static int usb_8dev_wait_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size, + int *actual_length) +{ + return usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_RX), + msg, size, actual_length, USB_8DEV_CMD_TIMEOUT); +} + +/* Send command to device and receive result. + * Command was successful when opt1 = 0. + */ +static int usb_8dev_send_cmd(struct usb_8dev_priv *priv, + struct usb_8dev_cmd_msg *out, + struct usb_8dev_cmd_msg *in) +{ + int err; + int num_bytes_read; + struct net_device *netdev; + + netdev = priv->netdev; + + out->begin = USB_8DEV_CMD_START; + out->end = USB_8DEV_CMD_END; + + mutex_lock(&priv->usb_8dev_cmd_lock); + + memcpy(priv->cmd_msg_buffer, out, + sizeof(struct usb_8dev_cmd_msg)); + + err = usb_8dev_send_cmd_msg(priv, priv->cmd_msg_buffer, + sizeof(struct usb_8dev_cmd_msg)); + if (err < 0) { + netdev_err(netdev, "sending command message failed\n"); + goto failed; + } + + err = usb_8dev_wait_cmd_msg(priv, priv->cmd_msg_buffer, + sizeof(struct usb_8dev_cmd_msg), + &num_bytes_read); + if (err < 0) { + netdev_err(netdev, "no command message answer\n"); + goto failed; + } + + memcpy(in, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg)); + + if (in->begin != USB_8DEV_CMD_START || in->end != USB_8DEV_CMD_END || + num_bytes_read != 16 || in->opt1 != 0) + err = -EPROTO; + +failed: + mutex_unlock(&priv->usb_8dev_cmd_lock); + return err; +} + +/* Send open command to device */ +static int usb_8dev_cmd_open(struct usb_8dev_priv *priv) +{ + struct can_bittiming *bt = &priv->can.bittiming; + struct usb_8dev_cmd_msg outmsg; + struct usb_8dev_cmd_msg inmsg; + u32 ctrlmode = priv->can.ctrlmode; + u32 flags = USB_8DEV_STATUS_FRAME; + __be32 beflags; + __be16 bebrp; + + memset(&outmsg, 0, sizeof(outmsg)); + outmsg.command = USB_8DEV_OPEN; + outmsg.opt1 = USB_8DEV_BAUD_MANUAL; + outmsg.data[0] = bt->prop_seg + bt->phase_seg1; + outmsg.data[1] = bt->phase_seg2; + outmsg.data[2] = bt->sjw; + + /* BRP */ + bebrp = cpu_to_be16((u16)bt->brp); + memcpy(&outmsg.data[3], &bebrp, sizeof(bebrp)); + + /* flags */ + if (ctrlmode & CAN_CTRLMODE_LOOPBACK) + flags |= USB_8DEV_LOOPBACK; + if (ctrlmode & CAN_CTRLMODE_LISTENONLY) + flags |= USB_8DEV_SILENT; + if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) + flags |= USB_8DEV_DISABLE_AUTO_RESTRANS; + + beflags = cpu_to_be32(flags); + memcpy(&outmsg.data[5], &beflags, sizeof(beflags)); + + return usb_8dev_send_cmd(priv, &outmsg, &inmsg); +} + +/* Send close command to device */ +static int usb_8dev_cmd_close(struct usb_8dev_priv *priv) +{ + struct usb_8dev_cmd_msg inmsg; + struct usb_8dev_cmd_msg outmsg = { + .channel = 0, + .command = USB_8DEV_CLOSE, + .opt1 = 0, + .opt2 = 0 + }; + + return usb_8dev_send_cmd(priv, &outmsg, &inmsg); +} + +/* Get firmware and hardware version */ +static int usb_8dev_cmd_version(struct usb_8dev_priv *priv, u32 *res) +{ + struct usb_8dev_cmd_msg inmsg; + struct usb_8dev_cmd_msg outmsg = { + .channel = 0, + .command = USB_8DEV_GET_SOFTW_HARDW_VER, + .opt1 = 0, + .opt2 = 0 + }; + + int err = usb_8dev_send_cmd(priv, &outmsg, &inmsg); + if (err) + return err; + + *res = be32_to_cpup((__be32 *)inmsg.data); + + return err; +} + +/* Set network device mode + * + * Maybe we should leave this function empty, because the device + * set mode variable with open command. + */ +static int usb_8dev_set_mode(struct net_device *netdev, enum can_mode mode) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + int err = 0; + + switch (mode) { + case CAN_MODE_START: + err = usb_8dev_cmd_open(priv); + if (err) + netdev_warn(netdev, "couldn't start device"); + break; + + default: + return -EOPNOTSUPP; + } + + return err; +} + +/* Read error/status frames */ +static void usb_8dev_rx_err_msg(struct usb_8dev_priv *priv, + struct usb_8dev_rx_msg *msg) +{ + struct can_frame *cf; + struct sk_buff *skb; + struct net_device_stats *stats = &priv->netdev->stats; + + /* Error message: + * byte 0: Status + * byte 1: bit 7: Receive Passive + * byte 1: bit 0-6: Receive Error Counter + * byte 2: Transmit Error Counter + * byte 3: Always 0 (maybe reserved for future use) + */ + + u8 state = msg->data[0]; + u8 rxerr = msg->data[1] & USB_8DEV_RP_MASK; + u8 txerr = msg->data[2]; + int rx_errors = 0; + int tx_errors = 0; + + skb = alloc_can_err_skb(priv->netdev, &cf); + if (!skb) + return; + + switch (state) { + case USB_8DEV_STATUSMSG_OK: + priv->can.state = CAN_STATE_ERROR_ACTIVE; + cf->can_id |= CAN_ERR_PROT; + cf->data[2] = CAN_ERR_PROT_ACTIVE; + break; + case USB_8DEV_STATUSMSG_BUSOFF: + priv->can.state = CAN_STATE_BUS_OFF; + cf->can_id |= CAN_ERR_BUSOFF; + can_bus_off(priv->netdev); + break; + case USB_8DEV_STATUSMSG_OVERRUN: + case USB_8DEV_STATUSMSG_BUSLIGHT: + case USB_8DEV_STATUSMSG_BUSHEAVY: + cf->can_id |= CAN_ERR_CRTL; + break; + default: + priv->can.state = CAN_STATE_ERROR_WARNING; + cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; + priv->can.can_stats.bus_error++; + break; + } + + switch (state) { + case USB_8DEV_STATUSMSG_OK: + case USB_8DEV_STATUSMSG_BUSOFF: + break; + case USB_8DEV_STATUSMSG_ACK: + cf->can_id |= CAN_ERR_ACK; + tx_errors = 1; + break; + case USB_8DEV_STATUSMSG_CRC: + cf->data[2] |= CAN_ERR_PROT_UNSPEC; + cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ | + CAN_ERR_PROT_LOC_CRC_DEL; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_BIT0: + cf->data[2] |= CAN_ERR_PROT_BIT0; + tx_errors = 1; + break; + case USB_8DEV_STATUSMSG_BIT1: + cf->data[2] |= CAN_ERR_PROT_BIT1; + tx_errors = 1; + break; + case USB_8DEV_STATUSMSG_FORM: + cf->data[2] |= CAN_ERR_PROT_FORM; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_STUFF: + cf->data[2] |= CAN_ERR_PROT_STUFF; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_OVERRUN: + cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + stats->rx_over_errors++; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_BUSLIGHT: + priv->can.state = CAN_STATE_ERROR_WARNING; + cf->data[1] = (txerr > rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + priv->can.can_stats.error_warning++; + break; + case USB_8DEV_STATUSMSG_BUSHEAVY: + priv->can.state = CAN_STATE_ERROR_PASSIVE; + cf->data[1] = (txerr > rxerr) ? + CAN_ERR_CRTL_TX_PASSIVE : + CAN_ERR_CRTL_RX_PASSIVE; + priv->can.can_stats.error_passive++; + break; + default: + netdev_warn(priv->netdev, + "Unknown status/error message (%d)\n", state); + break; + } + + if (tx_errors) { + cf->data[2] |= CAN_ERR_PROT_TX; + stats->tx_errors++; + } + + if (rx_errors) + stats->rx_errors++; + + cf->data[6] = txerr; + cf->data[7] = rxerr; + + priv->bec.txerr = txerr; + priv->bec.rxerr = rxerr; + + netif_rx(skb); + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; +} + +/* Read data and status frames */ +static void usb_8dev_rx_can_msg(struct usb_8dev_priv *priv, + struct usb_8dev_rx_msg *msg) +{ + struct can_frame *cf; + struct sk_buff *skb; + struct net_device_stats *stats = &priv->netdev->stats; + + if (msg->type == USB_8DEV_TYPE_ERROR_FRAME && + msg->flags == USB_8DEV_ERR_FLAG) { + usb_8dev_rx_err_msg(priv, msg); + } else if (msg->type == USB_8DEV_TYPE_CAN_FRAME) { + skb = alloc_can_skb(priv->netdev, &cf); + if (!skb) + return; + + cf->can_id = be32_to_cpu(msg->id); + cf->can_dlc = get_can_dlc(msg->dlc & 0xF); + + if (msg->flags & USB_8DEV_EXTID) + cf->can_id |= CAN_EFF_FLAG; + + if (msg->flags & USB_8DEV_RTR) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, msg->data, cf->can_dlc); + + netif_rx(skb); + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; + } else { + netdev_warn(priv->netdev, "frame type %d unknown", + msg->type); + } + +} + +/* Callback for reading data from device + * + * Check urb status, call read function and resubmit urb read operation. + */ +static void usb_8dev_read_bulk_callback(struct urb *urb) +{ + struct usb_8dev_priv *priv = urb->context; + struct net_device *netdev; + int retval; + int pos = 0; + + netdev = priv->netdev; + + if (!netif_device_present(netdev)) + return; + + switch (urb->status) { + case 0: /* success */ + break; + + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + netdev_info(netdev, "Rx URB aborted (%d)\n", + urb->status); + goto resubmit_urb; + } + + while (pos < urb->actual_length) { + struct usb_8dev_rx_msg *msg; + + if (pos + sizeof(struct usb_8dev_rx_msg) > urb->actual_length) { + netdev_err(priv->netdev, "format error\n"); + break; + } + + msg = (struct usb_8dev_rx_msg *)(urb->transfer_buffer + pos); + usb_8dev_rx_can_msg(priv, msg); + + pos += sizeof(struct usb_8dev_rx_msg); + } + +resubmit_urb: + usb_fill_bulk_urb(urb, priv->udev, + usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_DATA_RX), + urb->transfer_buffer, RX_BUFFER_SIZE, + usb_8dev_read_bulk_callback, priv); + + retval = usb_submit_urb(urb, GFP_ATOMIC); + + if (retval == -ENODEV) + netif_device_detach(netdev); + else if (retval) + netdev_err(netdev, + "failed resubmitting read bulk urb: %d\n", retval); +} + +/* Callback handler for write operations + * + * Free allocated buffers, check transmit status and + * calculate statistic. + */ +static void usb_8dev_write_bulk_callback(struct urb *urb) +{ + struct usb_8dev_tx_urb_context *context = urb->context; + struct usb_8dev_priv *priv; + struct net_device *netdev; + + BUG_ON(!context); + + priv = context->priv; + netdev = priv->netdev; + + /* free up our allocated buffer */ + usb_free_coherent(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + + atomic_dec(&priv->active_tx_urbs); + + if (!netif_device_present(netdev)) + return; + + if (urb->status) + netdev_info(netdev, "Tx URB aborted (%d)\n", + urb->status); + + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += context->dlc; + + can_get_echo_skb(netdev, context->echo_index); + + /* Release context */ + context->echo_index = MAX_TX_URBS; + + netif_wake_queue(netdev); +} + +/* Send data to device */ +static netdev_tx_t usb_8dev_start_xmit(struct sk_buff *skb, + struct net_device *netdev) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + struct net_device_stats *stats = &netdev->stats; + struct can_frame *cf = (struct can_frame *) skb->data; + struct usb_8dev_tx_msg *msg; + struct urb *urb; + struct usb_8dev_tx_urb_context *context = NULL; + u8 *buf; + int i, err; + size_t size = sizeof(struct usb_8dev_tx_msg); + + if (can_dropped_invalid_skb(netdev, skb)) + return NETDEV_TX_OK; + + /* create a URB, and a buffer for it, and copy the data to the URB */ + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + netdev_err(netdev, "No memory left for URBs\n"); + goto nomem; + } + + buf = usb_alloc_coherent(priv->udev, size, GFP_ATOMIC, + &urb->transfer_dma); + if (!buf) { + netdev_err(netdev, "No memory left for USB buffer\n"); + goto nomembuf; + } + + memset(buf, 0, size); + + msg = (struct usb_8dev_tx_msg *)buf; + msg->begin = USB_8DEV_DATA_START; + msg->flags = 0x00; + + if (cf->can_id & CAN_RTR_FLAG) + msg->flags |= USB_8DEV_RTR; + + if (cf->can_id & CAN_EFF_FLAG) + msg->flags |= USB_8DEV_EXTID; + + msg->id = cpu_to_be32(cf->can_id & CAN_ERR_MASK); + msg->dlc = cf->can_dlc; + memcpy(msg->data, cf->data, cf->can_dlc); + msg->end = USB_8DEV_DATA_END; + + for (i = 0; i < MAX_TX_URBS; i++) { + if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) { + context = &priv->tx_contexts[i]; + break; + } + } + + /* May never happen! When this happens we'd more URBs in flight as + * allowed (MAX_TX_URBS). + */ + if (!context) + goto nofreecontext; + + context->priv = priv; + context->echo_index = i; + context->dlc = cf->can_dlc; + + usb_fill_bulk_urb(urb, priv->udev, + usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_DATA_TX), + buf, size, usb_8dev_write_bulk_callback, context); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usb_anchor_urb(urb, &priv->tx_submitted); + + can_put_echo_skb(skb, netdev, context->echo_index); + + atomic_inc(&priv->active_tx_urbs); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (unlikely(err)) + goto failed; + else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS) + /* Slow down tx path */ + netif_stop_queue(netdev); + + /* Release our reference to this URB, the USB core will eventually free + * it entirely. + */ + usb_free_urb(urb); + + return NETDEV_TX_OK; + +nofreecontext: + usb_unanchor_urb(urb); + usb_free_coherent(priv->udev, size, buf, urb->transfer_dma); + + netdev_warn(netdev, "couldn't find free context"); + + return NETDEV_TX_BUSY; + +failed: + can_free_echo_skb(netdev, context->echo_index); + + usb_unanchor_urb(urb); + usb_free_coherent(priv->udev, size, buf, urb->transfer_dma); + + atomic_dec(&priv->active_tx_urbs); + + if (err == -ENODEV) + netif_device_detach(netdev); + else + netdev_warn(netdev, "failed tx_urb %d\n", err); + +nomembuf: + usb_free_urb(urb); + +nomem: + dev_kfree_skb(skb); + stats->tx_dropped++; + + return NETDEV_TX_OK; +} + +static int usb_8dev_get_berr_counter(const struct net_device *netdev, + struct can_berr_counter *bec) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + + bec->txerr = priv->bec.txerr; + bec->rxerr = priv->bec.rxerr; + + return 0; +} + +/* Start USB device */ +static int usb_8dev_start(struct usb_8dev_priv *priv) +{ + struct net_device *netdev = priv->netdev; + int err, i; + + for (i = 0; i < MAX_RX_URBS; i++) { + struct urb *urb = NULL; + u8 *buf; + + /* create a URB, and a buffer for it */ + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + netdev_err(netdev, "No memory left for URBs\n"); + err = -ENOMEM; + break; + } + + buf = usb_alloc_coherent(priv->udev, RX_BUFFER_SIZE, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + netdev_err(netdev, "No memory left for USB buffer\n"); + usb_free_urb(urb); + err = -ENOMEM; + break; + } + + usb_fill_bulk_urb(urb, priv->udev, + usb_rcvbulkpipe(priv->udev, + USB_8DEV_ENDP_DATA_RX), + buf, RX_BUFFER_SIZE, + usb_8dev_read_bulk_callback, priv); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usb_anchor_urb(urb, &priv->rx_submitted); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + usb_unanchor_urb(urb); + usb_free_coherent(priv->udev, RX_BUFFER_SIZE, buf, + urb->transfer_dma); + break; + } + + /* Drop reference, USB core will take care of freeing it */ + usb_free_urb(urb); + } + + /* Did we submit any URBs */ + if (i == 0) { + netdev_warn(netdev, "couldn't setup read URBs\n"); + return err; + } + + /* Warn if we've couldn't transmit all the URBs */ + if (i < MAX_RX_URBS) + netdev_warn(netdev, "rx performance may be slow\n"); + + err = usb_8dev_cmd_open(priv); + if (err) + goto failed; + + priv->can.state = CAN_STATE_ERROR_ACTIVE; + + return 0; + +failed: + if (err == -ENODEV) + netif_device_detach(priv->netdev); + + netdev_warn(netdev, "couldn't submit control: %d\n", err); + + return err; +} + +/* Open USB device */ +static int usb_8dev_open(struct net_device *netdev) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + int err; + + /* common open */ + err = open_candev(netdev); + if (err) + return err; + + /* finally start device */ + err = usb_8dev_start(priv); + if (err) { + if (err == -ENODEV) + netif_device_detach(priv->netdev); + + netdev_warn(netdev, "couldn't start device: %d\n", + err); + + close_candev(netdev); + + return err; + } + + netif_start_queue(netdev); + + return 0; +} + +static void unlink_all_urbs(struct usb_8dev_priv *priv) +{ + int i; + + usb_kill_anchored_urbs(&priv->rx_submitted); + + usb_kill_anchored_urbs(&priv->tx_submitted); + atomic_set(&priv->active_tx_urbs, 0); + + for (i = 0; i < MAX_TX_URBS; i++) + priv->tx_contexts[i].echo_index = MAX_TX_URBS; +} + +/* Close USB device */ +static int usb_8dev_close(struct net_device *netdev) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + int err = 0; + + /* Send CLOSE command to CAN controller */ + err = usb_8dev_cmd_close(priv); + if (err) + netdev_warn(netdev, "couldn't stop device"); + + priv->can.state = CAN_STATE_STOPPED; + + netif_stop_queue(netdev); + + /* Stop polling */ + unlink_all_urbs(priv); + + close_candev(netdev); + + return err; +} + +static const struct net_device_ops usb_8dev_netdev_ops = { + .ndo_open = usb_8dev_open, + .ndo_stop = usb_8dev_close, + .ndo_start_xmit = usb_8dev_start_xmit, +}; + +static const struct can_bittiming_const usb_8dev_bittiming_const = { + .name = "usb_8dev", + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 1024, + .brp_inc = 1, +}; + +/* Probe USB device + * + * Check device and firmware. + * Set supported modes and bittiming constants. + * Allocate some memory. + */ +static int usb_8dev_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct net_device *netdev; + struct usb_8dev_priv *priv; + int i, err = -ENOMEM; + u32 version; + char buf[18]; + struct usb_device *usbdev = interface_to_usbdev(intf); + + /* product id looks strange, better we also check iProduct string */ + if (usb_string(usbdev, usbdev->descriptor.iProduct, buf, + sizeof(buf)) > 0 && strcmp(buf, "USB2CAN converter")) { + dev_info(&usbdev->dev, "ignoring: not an USB2CAN converter\n"); + return -ENODEV; + } + + netdev = alloc_candev(sizeof(struct usb_8dev_priv), MAX_TX_URBS); + if (!netdev) { + dev_err(&intf->dev, "Couldn't alloc candev\n"); + return -ENOMEM; + } + + priv = netdev_priv(netdev); + + priv->udev = usbdev; + priv->netdev = netdev; + + priv->can.state = CAN_STATE_STOPPED; + priv->can.clock.freq = USB_8DEV_ABP_CLOCK; + priv->can.bittiming_const = &usb_8dev_bittiming_const; + priv->can.do_set_mode = usb_8dev_set_mode; + priv->can.do_get_berr_counter = usb_8dev_get_berr_counter; + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | + CAN_CTRLMODE_LISTENONLY | + CAN_CTRLMODE_ONE_SHOT; + + netdev->netdev_ops = &usb_8dev_netdev_ops; + + netdev->flags |= IFF_ECHO; /* we support local echo */ + + init_usb_anchor(&priv->rx_submitted); + + init_usb_anchor(&priv->tx_submitted); + atomic_set(&priv->active_tx_urbs, 0); + + for (i = 0; i < MAX_TX_URBS; i++) + priv->tx_contexts[i].echo_index = MAX_TX_URBS; + + priv->cmd_msg_buffer = kzalloc(sizeof(struct usb_8dev_cmd_msg), + GFP_KERNEL); + if (!priv->cmd_msg_buffer) { + netdev_err(netdev, "Couldn't alloc Tx buffer\n"); + goto cleanup_candev; + } + + usb_set_intfdata(intf, priv); + + SET_NETDEV_DEV(netdev, &intf->dev); + + mutex_init(&priv->usb_8dev_cmd_lock); + + err = register_candev(netdev); + if (err) { + netdev_err(netdev, + "couldn't register CAN device: %d\n", err); + goto cleanup_cmd_msg_buffer; + } + + err = usb_8dev_cmd_version(priv, &version); + if (err) { + netdev_err(netdev, "can't get firmware version\n"); + goto cleanup_cmd_msg_buffer; + } else { + netdev_info(netdev, + "firmware: %d.%d, hardware: %d.%d\n", + (version>>24) & 0xff, (version>>16) & 0xff, + (version>>8) & 0xff, version & 0xff); + } + + return 0; + +cleanup_cmd_msg_buffer: + kfree(priv->cmd_msg_buffer); + +cleanup_candev: + free_candev(netdev); + + return err; + +} + +/* Called by the usb core when driver is unloaded or device is removed */ +static void usb_8dev_disconnect(struct usb_interface *intf) +{ + struct usb_8dev_priv *priv = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (priv) { + netdev_info(priv->netdev, "device disconnected\n"); + + unregister_netdev(priv->netdev); + free_candev(priv->netdev); + + unlink_all_urbs(priv); + } + +} + +static struct usb_driver usb_8dev_driver = { + .name = "usb_8dev", + .probe = usb_8dev_probe, + .disconnect = usb_8dev_disconnect, + .id_table = usb_8dev_table, +}; + +module_usb_driver(usb_8dev_driver); + +MODULE_AUTHOR("Bernd Krumboeck "); +MODULE_DESCRIPTION("CAN driver for 8 devices USB2CAN interfaces"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 996a953de02ffb852c9ac736f4e892008ed68884 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:50:55 +0100 Subject: can: add tx/rx LED trigger support This patch implements the functions to add two LED triggers, named -tx and -rx, to a canbus device driver. Triggers are called from specific handlers by each CAN device driver and can be disabled altogether with a Kconfig option. The implementation keeps the LED on when the interface is UP and blinks the LED on network activity at a configurable rate. This only supports can-dev based drivers, as it uses some support field in the can_priv structure. Supported drivers should call devm_can_led_init() and can_led_event() as needed. Cleanup is handled automatically by devres, so no *_exit function is needed. Supported events are: - CAN_LED_EVENT_OPEN: turn on tx/rx LEDs - CAN_LED_EVENT_STOP: turn off tx/rx LEDs - CAN_LED_EVENT_TX: trigger tx LED blink - CAN_LED_EVENT_RX: trigger tx LED blink Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 0c5a656..1cca19f 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -51,6 +51,17 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. +config CAN_LEDS + bool "Enable LED triggers for Netlink based drivers" + depends on LEDS_CLASS + select LEDS_TRIGGERS + ---help--- + This option adds two LED triggers for packet receive and transmit + events on each supported CAN device. + + Say Y here if you are working on a system with led-class supported + LEDs and you want to use them as canbus activity indicators. + config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5 diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile index 7de5986..c744039 100644 --- a/drivers/net/can/Makefile +++ b/drivers/net/can/Makefile @@ -8,6 +8,8 @@ obj-$(CONFIG_CAN_SLCAN) += slcan.o obj-$(CONFIG_CAN_DEV) += can-dev.o can-dev-y := dev.o +can-dev-$(CONFIG_CAN_LEDS) += led.o + obj-y += usb/ obj-y += softing/ diff --git a/drivers/net/can/led.c b/drivers/net/can/led.c new file mode 100644 index 0000000..c50a0d7 --- /dev/null +++ b/drivers/net/can/led.c @@ -0,0 +1,86 @@ +/* + * Copyright 2012, Fabio Baltieri + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +static unsigned long led_delay = 50; +module_param(led_delay, ulong, 0644); +MODULE_PARM_DESC(led_delay, + "blink delay time for activity leds (msecs, default: 50)."); + +/* Trigger a LED event in response to a CAN device event */ +void can_led_event(struct net_device *netdev, enum can_led_event event) +{ + struct can_priv *priv = netdev_priv(netdev); + + switch (event) { + case CAN_LED_EVENT_OPEN: + led_trigger_event(priv->tx_led_trig, LED_FULL); + led_trigger_event(priv->rx_led_trig, LED_FULL); + break; + case CAN_LED_EVENT_STOP: + led_trigger_event(priv->tx_led_trig, LED_OFF); + led_trigger_event(priv->rx_led_trig, LED_OFF); + break; + case CAN_LED_EVENT_TX: + if (led_delay) + led_trigger_blink_oneshot(priv->tx_led_trig, + &led_delay, &led_delay, 1); + break; + case CAN_LED_EVENT_RX: + if (led_delay) + led_trigger_blink_oneshot(priv->rx_led_trig, + &led_delay, &led_delay, 1); + break; + } +} +EXPORT_SYMBOL_GPL(can_led_event); + +static void can_led_release(struct device *gendev, void *res) +{ + struct can_priv *priv = netdev_priv(to_net_dev(gendev)); + + led_trigger_unregister_simple(priv->tx_led_trig); + led_trigger_unregister_simple(priv->rx_led_trig); +} + +/* Register CAN LED triggers for a CAN device + * + * This is normally called from a driver's probe function + */ +void devm_can_led_init(struct net_device *netdev) +{ + struct can_priv *priv = netdev_priv(netdev); + void *res; + + res = devres_alloc(can_led_release, 0, GFP_KERNEL); + if (!res) { + netdev_err(netdev, "cannot register LED triggers\n"); + return; + } + + snprintf(priv->tx_led_trig_name, sizeof(priv->tx_led_trig_name), + "%s-tx", netdev->name); + snprintf(priv->rx_led_trig_name, sizeof(priv->rx_led_trig_name), + "%s-rx", netdev->name); + + led_trigger_register_simple(priv->tx_led_trig_name, + &priv->tx_led_trig); + led_trigger_register_simple(priv->rx_led_trig_name, + &priv->rx_led_trig); + + devres_add(&netdev->dev, res); +} +EXPORT_SYMBOL_GPL(devm_can_led_init); diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 2b2fc34..7747d9b 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -16,6 +16,7 @@ #include #include #include +#include /* * CAN mode @@ -52,6 +53,13 @@ struct can_priv { unsigned int echo_skb_max; struct sk_buff **echo_skb; + +#ifdef CONFIG_CAN_LEDS + struct led_trigger *tx_led_trig; + char tx_led_trig_name[CAN_LED_NAME_SZ]; + struct led_trigger *rx_led_trig; + char rx_led_trig_name[CAN_LED_NAME_SZ]; +#endif }; /* diff --git a/include/linux/can/led.h b/include/linux/can/led.h new file mode 100644 index 0000000..12d5549 --- /dev/null +++ b/include/linux/can/led.h @@ -0,0 +1,42 @@ +/* + * Copyright 2012, Fabio Baltieri + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef CAN_LED_H +#define CAN_LED_H + +#include +#include + +enum can_led_event { + CAN_LED_EVENT_OPEN, + CAN_LED_EVENT_STOP, + CAN_LED_EVENT_TX, + CAN_LED_EVENT_RX, +}; + +#ifdef CONFIG_CAN_LEDS + +/* keep space for interface name + "-tx"/"-rx" suffix and null terminator */ +#define CAN_LED_NAME_SZ (IFNAMSIZ + 4) + +void can_led_event(struct net_device *netdev, enum can_led_event event); +void devm_can_led_init(struct net_device *netdev); + +#else + +static inline void can_led_event(struct net_device *netdev, + enum can_led_event event) +{ +} +static inline void devm_can_led_init(struct net_device *netdev) +{ +} + +#endif + +#endif -- cgit v0.10.2 From bf03a5379cd3492fbeca42111340581ba9dee0b8 Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 18 Dec 2012 18:50:56 +0100 Subject: can: export a safe netdev_priv wrapper for candev In net_device notifier calls, it was impossible to determine if a CAN device is based on candev in a safe way. This patch adds such test in order to access candev storage from within those notifiers. Signed-off-by: Kurt Van Dijck Acked-by: Oliver Hartkopp Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 8233e5e..13e7380 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -794,6 +794,19 @@ void unregister_candev(struct net_device *dev) } EXPORT_SYMBOL_GPL(unregister_candev); +/* + * Test if a network device is a candev based device + * and return the can_priv* if so. + */ +struct can_priv *safe_candev_priv(struct net_device *dev) +{ + if ((dev->type != ARPHRD_CAN) || (dev->rtnl_link_ops != &can_link_ops)) + return NULL; + + return netdev_priv(dev); +} +EXPORT_SYMBOL_GPL(safe_candev_priv); + static __init int can_dev_init(void) { int err; diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 7747d9b..fb0ab65 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -106,6 +106,9 @@ u8 can_len2dlc(u8 len); struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); void free_candev(struct net_device *dev); +/* a candev safe wrapper around netdev_priv */ +struct can_priv *safe_candev_priv(struct net_device *dev); + int open_candev(struct net_device *dev); void close_candev(struct net_device *dev); -- cgit v0.10.2 From a1ef7bd9fce8aba8e4701e60208148fb3bc9bdd4 Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 18 Dec 2012 18:50:57 +0100 Subject: can: rename LED trigger name on netdev renames The LED trigger name for CAN devices is based on the initial CAN device name, but does never change. The LED trigger name is not guaranteed to be unique in case of hotplugging CAN devices. This patch tries to address this problem by modifying the LED trigger name according to the CAN device name when the latter changes. v1 - Kurt Van Dijck v2 - Fabio Baltieri - remove rename blocking if trigger is bound - use led-subsystem function for the actual rename (still WiP) - call init/exit functions from dev.c v3 - Kurt Van Dijck - safe operation for non-candev based devices (vcan, slcan) based on earlier patch v4 - Kurt Van Dijck - trivial patch mistakes fixed Signed-off-by: Kurt Van Dijck Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 13e7380..6abc6e5 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #define MOD_DESC "CAN device driver interface" @@ -811,6 +812,8 @@ static __init int can_dev_init(void) { int err; + can_led_notifier_init(); + err = rtnl_link_register(&can_link_ops); if (!err) printk(KERN_INFO MOD_DESC "\n"); @@ -822,6 +825,8 @@ module_init(can_dev_init); static __exit void can_dev_exit(void) { rtnl_link_unregister(&can_link_ops); + + can_led_notifier_exit(); } module_exit(can_dev_exit); diff --git a/drivers/net/can/led.c b/drivers/net/can/led.c index c50a0d7..f27fca6 100644 --- a/drivers/net/can/led.c +++ b/drivers/net/can/led.c @@ -1,5 +1,6 @@ /* * Copyright 2012, Fabio Baltieri + * Copyright 2012, Kurt Van Dijck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -84,3 +85,40 @@ void devm_can_led_init(struct net_device *netdev) devres_add(&netdev->dev, res); } EXPORT_SYMBOL_GPL(devm_can_led_init); + +/* NETDEV rename notifier to rename the associated led triggers too */ +static int can_led_notifier(struct notifier_block *nb, unsigned long msg, + void *data) +{ + struct net_device *netdev = data; + struct can_priv *priv = safe_candev_priv(netdev); + char name[CAN_LED_NAME_SZ]; + + if (!priv) + return NOTIFY_DONE; + + if (msg == NETDEV_CHANGENAME) { + snprintf(name, sizeof(name), "%s-tx", netdev->name); + led_trigger_rename_static(name, priv->tx_led_trig); + + snprintf(name, sizeof(name), "%s-rx", netdev->name); + led_trigger_rename_static(name, priv->rx_led_trig); + } + + return NOTIFY_DONE; +} + +/* notifier block for netdevice event */ +static struct notifier_block can_netdev_notifier __read_mostly = { + .notifier_call = can_led_notifier, +}; + +int __init can_led_notifier_init(void) +{ + return register_netdevice_notifier(&can_netdev_notifier); +} + +void __exit can_led_notifier_exit(void) +{ + unregister_netdevice_notifier(&can_netdev_notifier); +} diff --git a/include/linux/can/led.h b/include/linux/can/led.h index 12d5549..9c1167ba 100644 --- a/include/linux/can/led.h +++ b/include/linux/can/led.h @@ -26,6 +26,8 @@ enum can_led_event { void can_led_event(struct net_device *netdev, enum can_led_event event); void devm_can_led_init(struct net_device *netdev); +int __init can_led_notifier_init(void); +void __exit can_led_notifier_exit(void); #else @@ -36,6 +38,13 @@ static inline void can_led_event(struct net_device *netdev, static inline void devm_can_led_init(struct net_device *netdev) { } +static inline int can_led_notifier_init(void) +{ + return 0; +} +static inline void can_led_notifier_exit(void) +{ +} #endif -- cgit v0.10.2 From adccadb92f0571fd0f9b2ac8011057a7de9e3e63 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:50:58 +0100 Subject: can: flexcan: add LED trigger support Add support for canbus activity led indicators on flexcan devices by calling appropriate can_led_* functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 0289a6d..769d29e 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -564,6 +565,8 @@ static int flexcan_read_frame(struct net_device *dev) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + can_led_event(dev, CAN_LED_EVENT_RX); + return 1; } @@ -652,6 +655,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) { stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; + can_led_event(dev, CAN_LED_EVENT_TX); flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1); netif_wake_queue(dev); } @@ -865,6 +869,9 @@ static int flexcan_open(struct net_device *dev) err = flexcan_chip_start(dev); if (err) goto out_close; + + can_led_event(dev, CAN_LED_EVENT_OPEN); + napi_enable(&priv->napi); netif_start_queue(dev); @@ -893,6 +900,8 @@ static int flexcan_close(struct net_device *dev) close_candev(dev); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -1092,6 +1101,8 @@ static int flexcan_probe(struct platform_device *pdev) goto failed_register; } + devm_can_led_init(dev); + dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n", priv->base, dev->irq); -- cgit v0.10.2 From 4723f2b8a12b6170e1835082d8c73fa932306846 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:50:59 +0100 Subject: can: at91_can: add LED trigger support Add support for canbus activity led indicators on at91_can devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 81baefd..44f3637 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -37,6 +37,7 @@ #include #include +#include #define AT91_MB_MASK(i) ((1 << (i)) - 1) @@ -641,6 +642,8 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + + can_led_event(dev, CAN_LED_EVENT_RX); } /** @@ -875,6 +878,7 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr) /* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */ can_get_echo_skb(dev, mb - get_mb_tx_first(priv)); dev->stats.tx_packets++; + can_led_event(dev, CAN_LED_EVENT_TX); } } @@ -1128,6 +1132,8 @@ static int at91_open(struct net_device *dev) goto out_close; } + can_led_event(dev, CAN_LED_EVENT_OPEN); + /* start chip and queuing */ at91_chip_start(dev); napi_enable(&priv->napi); @@ -1159,6 +1165,8 @@ static int at91_close(struct net_device *dev) close_candev(dev); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -1321,6 +1329,8 @@ static int at91_can_probe(struct platform_device *pdev) goto exit_free; } + devm_can_led_init(dev); + dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n", priv->reg_base, dev->irq); -- cgit v0.10.2 From d7ff5aae6ce3670afc1e000c08ea238712d70fae Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:51:00 +0100 Subject: can: ti_hecc: add LED trigger support Add support for canbus activity led indicators on ti_hecc devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Anant Gole Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index f898c63..f52a975 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -50,6 +50,7 @@ #include #include +#include #include #define DRV_NAME "ti_hecc" @@ -593,6 +594,7 @@ static int ti_hecc_rx_pkt(struct ti_hecc_priv *priv, int mbxno) spin_unlock_irqrestore(&priv->mbx_lock, flags); stats->rx_bytes += cf->can_dlc; + can_led_event(priv->ndev, CAN_LED_EVENT_RX); netif_receive_skb(skb); stats->rx_packets++; @@ -796,6 +798,7 @@ static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id) stats->tx_bytes += hecc_read_mbx(priv, mbxno, HECC_CANMCF) & 0xF; stats->tx_packets++; + can_led_event(ndev, CAN_LED_EVENT_TX); can_get_echo_skb(ndev, mbxno); --priv->tx_tail; } @@ -851,6 +854,8 @@ static int ti_hecc_open(struct net_device *ndev) return err; } + can_led_event(ndev, CAN_LED_EVENT_OPEN); + ti_hecc_start(ndev); napi_enable(&priv->napi); netif_start_queue(ndev); @@ -869,6 +874,8 @@ static int ti_hecc_close(struct net_device *ndev) close_candev(ndev); ti_hecc_transceiver_switch(priv, 0); + can_led_event(ndev, CAN_LED_EVENT_STOP); + return 0; } @@ -961,6 +968,9 @@ static int ti_hecc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "register_candev() failed\n"); goto probe_exit_clk; } + + devm_can_led_init(ndev); + dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n", priv->base, (u32) ndev->irq); -- cgit v0.10.2 From 5090f805600ff7dccca358f9986a92dd34185326 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:51:01 +0100 Subject: can: c_can: add LED trigger support Add support for canbus activity led indicators on c_can devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Bhupesh Sharma Cc: AnilKumar Ch Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 5233b8f..57eb1e7 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "c_can.h" @@ -477,6 +478,8 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) stats->rx_packets++; stats->rx_bytes += frame->can_dlc; + can_led_event(dev, CAN_LED_EVENT_RX); + return 0; } @@ -751,6 +754,7 @@ static void c_can_do_tx(struct net_device *dev) C_CAN_IFACE(MSGCTRL_REG, 0)) & IF_MCONT_DLC_MASK; stats->tx_packets++; + can_led_event(dev, CAN_LED_EVENT_TX); c_can_inval_msg_object(dev, 0, msg_obj_no); } else { break; @@ -1115,6 +1119,8 @@ static int c_can_open(struct net_device *dev) napi_enable(&priv->napi); + can_led_event(dev, CAN_LED_EVENT_OPEN); + /* start the c_can controller */ c_can_start(dev); @@ -1143,6 +1149,8 @@ static int c_can_close(struct net_device *dev) c_can_reset_ram(priv, false); c_can_pm_runtime_put_sync(priv); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -1268,6 +1276,8 @@ int register_c_can_dev(struct net_device *dev) err = register_candev(dev); if (err) c_can_pm_runtime_disable(priv); + else + devm_can_led_init(dev); return err; } -- cgit v0.10.2 From eb072a9baebefeef33ece48c0a6fc2f8200e5ed2 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:51:02 +0100 Subject: can: mcp251x: add LED trigger support Add support for canbus activity led indicators on mcp251x devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Christian Pellegrin Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index 5eaf47b..f32b9fc 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -60,6 +60,7 @@ #include #include +#include #include #include #include @@ -494,6 +495,9 @@ static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx) priv->net->stats.rx_packets++; priv->net->stats.rx_bytes += frame->can_dlc; + + can_led_event(priv->net, CAN_LED_EVENT_RX); + netif_rx_ni(skb); } @@ -707,6 +711,8 @@ static int mcp251x_stop(struct net_device *net) mutex_unlock(&priv->mcp_lock); + can_led_event(net, CAN_LED_EVENT_STOP); + return 0; } @@ -905,6 +911,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id) if (intf & CANINTF_TX) { net->stats.tx_packets++; net->stats.tx_bytes += priv->tx_len - 1; + can_led_event(net, CAN_LED_EVENT_TX); if (priv->tx_len) { can_get_echo_skb(net, 0); priv->tx_len = 0; @@ -968,6 +975,9 @@ static int mcp251x_open(struct net_device *net) mcp251x_open_clean(net); goto open_unlock; } + + can_led_event(net, CAN_LED_EVENT_OPEN); + netif_wake_queue(net); open_unlock: @@ -1077,10 +1087,15 @@ static int mcp251x_can_probe(struct spi_device *spi) pdata->transceiver_enable(0); ret = register_candev(net); - if (!ret) { - dev_info(&spi->dev, "probed\n"); - return ret; - } + if (ret) + goto error_probe; + + devm_can_led_init(net); + + dev_info(&spi->dev, "probed\n"); + + return ret; + error_probe: if (!mcp251x_enable_dma) kfree(priv->spi_rx_buf); -- cgit v0.10.2 From a04282f54b52cf5a629a98f09712da1e630a1060 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 18 Dec 2012 18:51:03 +0100 Subject: can: sja1000: add LED trigger support Add support for canbus activity led indicators on sja1000 devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 83ee11e..daf4013 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -60,6 +60,7 @@ #include #include +#include #include "sja1000.h" @@ -368,6 +369,8 @@ static void sja1000_rx(struct net_device *dev) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + + can_led_event(dev, CAN_LED_EVENT_RX); } static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) @@ -521,6 +524,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) can_get_echo_skb(dev, 0); } netif_wake_queue(dev); + can_led_event(dev, CAN_LED_EVENT_TX); } if (isrc & IRQ_RI) { /* receive interrupt */ @@ -575,6 +579,8 @@ static int sja1000_open(struct net_device *dev) /* init and start chi */ sja1000_start(dev); + can_led_event(dev, CAN_LED_EVENT_OPEN); + netif_start_queue(dev); return 0; @@ -592,6 +598,8 @@ static int sja1000_close(struct net_device *dev) close_candev(dev); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -639,6 +647,8 @@ static const struct net_device_ops sja1000_netdev_ops = { int register_sja1000dev(struct net_device *dev) { + int ret; + if (!sja1000_probe_chip(dev)) return -ENODEV; @@ -648,7 +658,12 @@ int register_sja1000dev(struct net_device *dev) set_reset_mode(dev); chipset_init(dev); - return register_candev(dev); + ret = register_candev(dev); + + if (!ret) + devm_can_led_init(dev); + + return ret; } EXPORT_SYMBOL_GPL(register_sja1000dev); -- cgit v0.10.2 From e2d5f2c7d66224c1a401ed1f797e467c02c025b8 Mon Sep 17 00:00:00 2001 From: Bernd Krumboeck Date: Tue, 18 Dec 2012 18:51:04 +0100 Subject: can: usb_8dev: add LED trigger support Add support for canbus activity led indicators on usb_8dev devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Signed-off-by: Bernd Krumboeck Signed-off-by: Fabio Baltieri Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index a9e73fa..f789e6f 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -33,6 +33,7 @@ #include #include #include +#include /* driver constants */ #define MAX_RX_URBS 20 @@ -497,6 +498,8 @@ static void usb_8dev_rx_can_msg(struct usb_8dev_priv *priv, stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + + can_led_event(priv->netdev, CAN_LED_EVENT_RX); } else { netdev_warn(priv->netdev, "frame type %d unknown", msg->type); @@ -597,6 +600,8 @@ static void usb_8dev_write_bulk_callback(struct urb *urb) can_get_echo_skb(netdev, context->echo_index); + can_led_event(netdev, CAN_LED_EVENT_TX); + /* Release context */ context->echo_index = MAX_TX_URBS; @@ -819,6 +824,8 @@ static int usb_8dev_open(struct net_device *netdev) if (err) return err; + can_led_event(netdev, CAN_LED_EVENT_OPEN); + /* finally start device */ err = usb_8dev_start(priv); if (err) { @@ -871,6 +878,8 @@ static int usb_8dev_close(struct net_device *netdev) close_candev(netdev); + can_led_event(netdev, CAN_LED_EVENT_STOP); + return err; } @@ -978,6 +987,8 @@ static int usb_8dev_probe(struct usb_interface *intf, (version>>8) & 0xff, version & 0xff); } + devm_can_led_init(netdev); + return 0; cleanup_cmd_msg_buffer: -- cgit v0.10.2 From 156c2bb9f88065c8da78814f98fde665a5cbb527 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 17 Jan 2013 18:43:39 +0100 Subject: can: add private data space for CAN sk_buffs The struct can_skb_priv is used to transport additional information along with the stored struct can(fd)_frame that can not be contained in existing struct sk_buff elements. can_skb_priv is located in the skb headroom, which does not touch the existing CAN sk_buff usage with skb->data and skb->len, so that even out-of-tree CAN drivers can be used without changes. Btw. out-of-tree CAN drivers without can_skb_priv in the sk_buff headroom would not support features based on can_skb_priv. The can_skb_priv->ifindex contains the first interface where the CAN frame appeared on the local host. Unfortunately skb->skb_iif can not be used as this value is overwritten in every netif_receive_skb() call. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 6abc6e5..59ada08 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -502,13 +503,18 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf) { struct sk_buff *skb; - skb = netdev_alloc_skb(dev, sizeof(struct can_frame)); + skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) + + sizeof(struct can_frame)); if (unlikely(!skb)) return NULL; skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; + + skb_reserve(skb, sizeof(struct can_skb_priv)); + ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); memset(*cf, 0, sizeof(struct can_frame)); diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index adc3708..e79a8d1 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -55,6 +55,7 @@ #include #include #include +#include static __initconst const char banner[] = KERN_INFO "slcan: serial line CAN interface driver\n"; @@ -184,7 +185,8 @@ static void slc_bump(struct slcan *sl) cf.data[i] |= tmp; } - skb = dev_alloc_skb(sizeof(struct can_frame)); + skb = dev_alloc_skb(sizeof(struct can_frame) + + sizeof(struct can_skb_priv)); if (!skb) return; @@ -192,6 +194,10 @@ static void slc_bump(struct slcan *sl) skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; + + skb_reserve(skb, sizeof(struct can_skb_priv)); + ((struct can_skb_priv *)(skb->head))->ifindex = sl->dev->ifindex; + memcpy(skb_put(skb, sizeof(struct can_frame)), &cf, sizeof(struct can_frame)); netif_rx_ni(skb); diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h new file mode 100644 index 0000000..4b0f24d --- /dev/null +++ b/include/linux/can/skb.h @@ -0,0 +1,35 @@ +/* + * linux/can/skb.h + * + * Definitions for the CAN network socket buffer + * + * Copyright (C) 2012 Oliver Hartkopp + * + */ + +#ifndef CAN_SKB_H +#define CAN_SKB_H + +#include +#include + +/* + * The struct can_skb_priv is used to transport additional information along + * with the stored struct can(fd)_frame that can not be contained in existing + * struct sk_buff elements. + * N.B. that this information must not be modified in cloned CAN sk_buffs. + * To modify the CAN frame content or the struct can_skb_priv content + * skb_copy() needs to be used instead of skb_clone(). + */ + +/** + * struct can_skb_priv - private additional data inside CAN sk_buffs + * @ifindex: ifindex of the first interface the CAN frame appeared on + * @cf: align to the following CAN frame at skb->data + */ +struct can_skb_priv { + int ifindex; + struct can_frame cf[0]; +}; + +#endif /* CAN_SKB_H */ diff --git a/net/can/bcm.c b/net/can/bcm.c index 969b7cd..ccc27b9 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include #include @@ -256,10 +257,13 @@ static void bcm_can_tx(struct bcm_op *op) return; } - skb = alloc_skb(CFSIZ, gfp_any()); + skb = alloc_skb(CFSIZ + sizeof(struct can_skb_priv), gfp_any()); if (!skb) goto out; + skb_reserve(skb, sizeof(struct can_skb_priv)); + ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + memcpy(skb_put(skb, CFSIZ), cf, CFSIZ); /* send with loopback */ @@ -1199,11 +1203,12 @@ static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) if (!ifindex) return -ENODEV; - skb = alloc_skb(CFSIZ, GFP_KERNEL); - + skb = alloc_skb(CFSIZ + sizeof(struct can_skb_priv), GFP_KERNEL); if (!skb) return -ENOMEM; + skb_reserve(skb, sizeof(struct can_skb_priv)); + err = memcpy_fromiovec(skb_put(skb, CFSIZ), msg->msg_iov, CFSIZ); if (err < 0) { kfree_skb(skb); @@ -1216,6 +1221,7 @@ static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) return -ENODEV; } + ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; skb->dev = dev; skb->sk = sk; err = can_send(skb, 1); /* send with loopback */ diff --git a/net/can/raw.c b/net/can/raw.c index 5b0e3e3..5d860e8 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include #include @@ -699,11 +700,14 @@ static int raw_sendmsg(struct kiocb *iocb, struct socket *sock, if (!dev) return -ENXIO; - skb = sock_alloc_send_skb(sk, size, msg->msg_flags & MSG_DONTWAIT, - &err); + skb = sock_alloc_send_skb(sk, size + sizeof(struct can_skb_priv), + msg->msg_flags & MSG_DONTWAIT, &err); if (!skb) goto put_dev; + skb_reserve(skb, sizeof(struct can_skb_priv)); + ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size); if (err < 0) goto free_skb; -- cgit v0.10.2 From d904d3edcbb26efc86ea3575bb4265559801a94b Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 17 Jan 2013 18:43:41 +0100 Subject: can: gw: make routing to the incoming CAN interface configurable Introduce new configuration flag CGW_FLAGS_CAN_IIF_TX_OK to configure if a CAN sk_buff that has been routed with can-gw is allowed to be send back to the originating CAN interface. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index 8e1db18..0505c7f 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -51,6 +51,7 @@ enum { #define CGW_FLAGS_CAN_ECHO 0x01 #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02 +#define CGW_FLAGS_CAN_IIF_TX_OK 0x04 #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */ diff --git a/net/can/gw.c b/net/can/gw.c index 574dda78e..37a3efb 100644 --- a/net/can/gw.c +++ b/net/can/gw.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include #include @@ -347,6 +348,13 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data) return; } + /* is sending the skb back to the incoming interface not allowed? */ + if (!(gwj->flags & CGW_FLAGS_CAN_IIF_TX_OK) && + skb_headroom(skb) == sizeof(struct can_skb_priv) && + (((struct can_skb_priv *)(skb->head))->ifindex == + gwj->dst.dev->ifindex)) + return; + /* * clone the given skb, which has not been done in can_rcv() * -- cgit v0.10.2 From be286bafe1f4069094865264f29805854c5788bf Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 17 Jan 2013 18:43:44 +0100 Subject: can: gw: add a variable limit for CAN frame routings To prevent a possible misconfiguration (e.g. circular CAN frame routings) limit the number of routings of a single CAN frame to a small variable value. The limit can be specified by the module parameter 'max_hops' (1..6). The default value is 1 (one hop), according to the original can-gw behaviour. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/net/can/gw.c b/net/can/gw.c index 37a3efb..4216a80 100644 --- a/net/can/gw.c +++ b/net/can/gw.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -58,14 +59,25 @@ #include #include -#define CAN_GW_VERSION "20101209" -static __initconst const char banner[] = - KERN_INFO "can: netlink gateway (rev " CAN_GW_VERSION ")\n"; +#define CAN_GW_VERSION "20130117" +#define CAN_GW_NAME "can-gw" MODULE_DESCRIPTION("PF_CAN netlink gateway"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Oliver Hartkopp "); -MODULE_ALIAS("can-gw"); +MODULE_ALIAS(CAN_GW_NAME); + +#define CGW_MIN_HOPS 1 +#define CGW_MAX_HOPS 6 +#define CGW_DEFAULT_HOPS 1 + +static unsigned int max_hops __read_mostly = CGW_DEFAULT_HOPS; +module_param(max_hops, uint, S_IRUGO); +MODULE_PARM_DESC(max_hops, + "maximum " CAN_GW_NAME " routing hops for CAN frames " + "(valid values: " __stringify(CGW_MIN_HOPS) "-" + __stringify(CGW_MAX_HOPS) " hops, " + "default: " __stringify(CGW_DEFAULT_HOPS) ")"); static HLIST_HEAD(cgw_list); static struct notifier_block notifier; @@ -339,8 +351,23 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data) struct sk_buff *nskb; int modidx = 0; - /* do not handle already routed frames - see comment below */ - if (skb_mac_header_was_set(skb)) + /* + * Do not handle CAN frames routed more than 'max_hops' times. + * In general we should never catch this delimiter which is intended + * to cover a misconfiguration protection (e.g. circular CAN routes). + * + * The Controller Area Network controllers only accept CAN frames with + * correct CRCs - which are not visible in the controller registers. + * According to skbuff.h documentation the csum_start element for IP + * checksums is undefined/unsued when ip_summed == CHECKSUM_UNNECESSARY. + * Only CAN skbs can be processed here which already have this property. + */ + +#define cgw_hops(skb) ((skb)->csum_start) + + BUG_ON(skb->ip_summed != CHECKSUM_UNNECESSARY); + + if (cgw_hops(skb) >= max_hops) return; if (!(gwj->dst.dev->flags & IFF_UP)) { @@ -371,15 +398,8 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data) return; } - /* - * Mark routed frames by setting some mac header length which is - * not relevant for the CAN frames located in the skb->data section. - * - * As dev->header_ops is not set in CAN netdevices no one is ever - * accessing the various header offsets in the CAN skbuffs anyway. - * E.g. using the packet socket to read CAN frames is still working. - */ - skb_set_mac_header(nskb, 8); + /* put the incremented hop counter in the cloned skb */ + cgw_hops(nskb) = cgw_hops(skb) + 1; nskb->dev = gwj->dst.dev; /* pointer to modifiable CAN frame */ @@ -903,7 +923,11 @@ static int cgw_remove_job(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) static __init int cgw_module_init(void) { - printk(banner); + /* sanitize given module parameter */ + max_hops = clamp_t(unsigned int, max_hops, CGW_MIN_HOPS, CGW_MAX_HOPS); + + pr_info("can: netlink gateway (rev " CAN_GW_VERSION ") max_hops=%d\n", + max_hops); cgw_cache = kmem_cache_create("can_gw", sizeof(struct cgw_job), 0, 0, NULL); -- cgit v0.10.2 From e6afa00a1409bc3bceed9ccb33111519463dfe7b Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 17 Jan 2013 18:43:46 +0100 Subject: can: gw: indicate and count deleted frames due to misconfiguration Add a statistic counter to detect deleted frames due to misconfiguration with a new read-only CGW_DELETED netlink attribute for the CAN gateway. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index 0505c7f..ae07bec 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -44,6 +44,7 @@ enum { CGW_SRC_IF, /* ifindex of source network interface */ CGW_DST_IF, /* ifindex of destination network interface */ CGW_FILTER, /* specify struct can_filter on source CAN device */ + CGW_DELETED, /* number of deleted CAN frames (see max_hops param) */ __CGW_MAX }; diff --git a/net/can/gw.c b/net/can/gw.c index 4216a80..acdd465 100644 --- a/net/can/gw.c +++ b/net/can/gw.c @@ -131,6 +131,7 @@ struct cgw_job { struct rcu_head rcu; u32 handled_frames; u32 dropped_frames; + u32 deleted_frames; struct cf_mod mod; union { /* CAN frame data source */ @@ -367,8 +368,11 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data) BUG_ON(skb->ip_summed != CHECKSUM_UNNECESSARY); - if (cgw_hops(skb) >= max_hops) + if (cgw_hops(skb) >= max_hops) { + /* indicate deleted frames due to misconfiguration */ + gwj->deleted_frames++; return; + } if (!(gwj->dst.dev->flags & IFF_UP)) { gwj->dropped_frames++; @@ -500,6 +504,11 @@ static int cgw_put_job(struct sk_buff *skb, struct cgw_job *gwj, int type, goto cancel; } + if (gwj->deleted_frames) { + if (nla_put_u32(skb, CGW_DELETED, gwj->deleted_frames) < 0) + goto cancel; + } + /* check non default settings of attributes */ if (gwj->mod.modtype.and) { @@ -799,6 +808,7 @@ static int cgw_create_job(struct sk_buff *skb, struct nlmsghdr *nlh, gwj->handled_frames = 0; gwj->dropped_frames = 0; + gwj->deleted_frames = 0; gwj->flags = r->flags; gwj->gwtype = r->gwtype; -- cgit v0.10.2 From c84e340a957c9b3cf16eddb426fc9cc4e8f61129 Mon Sep 17 00:00:00 2001 From: Sritej Velaga Date: Fri, 25 Jan 2013 10:20:34 +0000 Subject: qlcnic: set driver version in firmware Signed-off-by: Sritej Velaga Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 893cbe8..86487fb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -798,6 +798,7 @@ struct qlcnic_mac_list_s { #define QLCNIC_FW_CAPABILITY_MORE_CAPS BIT_31 #define QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG BIT_2 +#define QLCNIC_FW_CAPABILITY_2_OCBB BIT_5 /* module types */ #define LINKEVENT_MODULE_NOT_PRESENT 1 @@ -1421,6 +1422,7 @@ void qlcnic_set_multi(struct net_device *netdev); void qlcnic_free_mac_list(struct qlcnic_adapter *adapter); int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu); +int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *); int qlcnic_change_mtu(struct net_device *netdev, int new_mtu); netdev_features_t qlcnic_fix_features(struct net_device *netdev, netdev_features_t features); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index ee68fe3..7372964 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -160,6 +160,37 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, return cmd->rsp.arg[0]; } +int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *adapter) +{ + struct qlcnic_cmd_args cmd; + u32 arg1, arg2, arg3; + char drv_string[12]; + int err = 0; + + memset(drv_string, 0, sizeof(drv_string)); + snprintf(drv_string, sizeof(drv_string), "%d"".""%d"".""%d", + _QLCNIC_LINUX_MAJOR, _QLCNIC_LINUX_MINOR, + _QLCNIC_LINUX_SUBVERSION); + + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_DRV_VER); + memcpy(&arg1, drv_string, sizeof(u32)); + memcpy(&arg2, drv_string + 4, sizeof(u32)); + memcpy(&arg3, drv_string + 8, sizeof(u32)); + + cmd.req.arg[1] = arg1; + cmd.req.arg[2] = arg2; + cmd.req.arg[3] = arg3; + + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_info(&adapter->pdev->dev, + "Failed to set driver version in firmware\n"); + return -EIO; + } + + return 0; +} + int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index fb7ac8e..5f3308a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1724,6 +1724,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct qlcnic_adapter *adapter = NULL; struct qlcnic_hardware_context *ahw; int err, pci_using_dac = -1; + u32 capab2; char board_name[QLCNIC_MAX_BOARD_NAME_LEN]; err = pci_enable_device(pdev); @@ -1849,6 +1850,14 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto err_out_disable_mbx_intr; + if (qlcnic_82xx_check(adapter)) { + if (ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) { + capab2 = QLCRD32(adapter, CRB_FW_CAPABILITIES_2); + if (capab2 & QLCNIC_FW_CAPABILITY_2_OCBB) + qlcnic_fw_cmd_set_drv_version(adapter); + } + } + pci_set_drvdata(pdev, adapter); if (qlcnic_82xx_check(adapter)) -- cgit v0.10.2 From 776e7bded918d99f09d03e89b18bbad116ae45f6 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 25 Jan 2013 10:20:35 +0000 Subject: qlcnic: enable LRO on IPv6 without dest ip check Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 86487fb..35f3457 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -436,6 +436,7 @@ struct qlcnic_hardware_context { u16 act_pci_func; u32 capabilities; + u32 capabilities2; u32 temp; u32 int_vec_bit; u32 fw_hal_version; @@ -798,6 +799,7 @@ struct qlcnic_mac_list_s { #define QLCNIC_FW_CAPABILITY_MORE_CAPS BIT_31 #define QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG BIT_2 +#define QLCNIC_FW_CAP2_HW_LRO_IPV6 BIT_3 #define QLCNIC_FW_CAPABILITY_2_OCBB BIT_5 /* module types */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 6f5b5eb..8e0412b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -687,6 +687,11 @@ void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter) "Could not send interrupt coalescing parameters\n"); } +#define QLCNIC_ENABLE_IPV4_LRO 1 +#define QLCNIC_ENABLE_IPV6_LRO 2 +#define QLCNIC_NO_DEST_IPV4_CHECK (1 << 8) +#define QLCNIC_NO_DEST_IPV6_CHECK (2 << 8) + int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) { struct qlcnic_nic_req req; @@ -703,7 +708,15 @@ int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) word = QLCNIC_H2C_OPCODE_CONFIG_HW_LRO | ((u64)adapter->portnum << 16); req.req_hdr = cpu_to_le64(word); - req.words[0] = cpu_to_le64(enable); + word = 0; + if (enable) { + word = QLCNIC_ENABLE_IPV4_LRO | QLCNIC_NO_DEST_IPV4_CHECK; + if (adapter->ahw->capabilities2 & QLCNIC_FW_CAP2_HW_LRO_IPV6) + word |= QLCNIC_ENABLE_IPV6_LRO | + QLCNIC_NO_DEST_IPV6_CHECK; + } + + req.words[0] = cpu_to_le64(word); rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1); if (rv != 0) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 383ecd2..0033971 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -973,6 +973,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, struct sk_buff *skb; struct qlcnic_host_rds_ring *rds_ring; struct iphdr *iph; + struct ipv6hdr *ipv6h; struct tcphdr *th; bool push, timestamp; int index, l2_hdr_offset, l4_hdr_offset; @@ -1016,12 +1017,21 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, } skb->protocol = eth_type_trans(skb, netdev); - iph = (struct iphdr *)skb->data; - th = (struct tcphdr *)(skb->data + (iph->ihl << 2)); - length = (iph->ihl << 2) + (th->doff << 2) + lro_length; - iph->tot_len = htons(length); - iph->check = 0; - iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); + + if (htons(skb->protocol) == ETH_P_IPV6) { + ipv6h = (struct ipv6hdr *)skb->data; + th = (struct tcphdr *)(skb->data + sizeof(struct ipv6hdr)); + length = (th->doff << 2) + lro_length; + ipv6h->payload_len = htons(length); + } else { + iph = (struct iphdr *)skb->data; + th = (struct tcphdr *)(skb->data + (iph->ihl << 2)); + length = (iph->ihl << 2) + (th->doff << 2) + lro_length; + iph->tot_len = htons(length); + iph->check = 0; + iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); + } + th->psh = push; th->seq = htonl(seq_number); length = skb->len; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 5f3308a..e460401 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -781,6 +781,12 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter) adapter->ahw->max_tx_ques = nic_info.max_tx_ques; adapter->ahw->max_rx_ques = nic_info.max_rx_ques; adapter->ahw->capabilities = nic_info.capabilities; + + if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) { + u32 temp; + temp = QLCRD32(adapter, CRB_FW_CAPABILITIES_2); + adapter->ahw->capabilities2 = temp; + } adapter->ahw->max_mac_filters = nic_info.max_mac_filters; adapter->ahw->max_mtu = nic_info.max_mtu; -- cgit v0.10.2 From efbcb1b20a08a8dd6faefbc04a63330703bc6b5e Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 25 Jan 2013 10:20:36 +0000 Subject: qlcnic: enable RSS for TCP over IPv6 o This patch enables RSS for TYPE-C packets to enable RSS for TCP over IPv6 Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 8e0412b..186fe6e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -756,7 +756,10 @@ int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable) } -#define RSS_HASHTYPE_IP_TCP 0x3 +#define QLCNIC_RSS_HASHTYPE_IP_TCP 0x3 +#define QLCNIC_ENABLE_TYPE_C_RSS BIT_10 +#define QLCNIC_RSS_FEATURE_FLAG (1ULL << 63) +#define QLCNIC_RSS_IND_TABLE_MASK 0x7ULL int qlcnic_82xx_config_rss(struct qlcnic_adapter *adapter, int enable) { @@ -783,13 +786,19 @@ int qlcnic_82xx_config_rss(struct qlcnic_adapter *adapter, int enable) * 7-6: hash_type_ipv6 * 8: enable * 9: use indirection table - * 47-10: reserved - * 63-48: indirection table mask + * 10: type-c rss + * 11: udp rss + * 47-12: reserved + * 62-48: indirection table mask + * 63: feature flag */ - word = ((u64)(RSS_HASHTYPE_IP_TCP & 0x3) << 4) | - ((u64)(RSS_HASHTYPE_IP_TCP & 0x3) << 6) | + word = ((u64)(QLCNIC_RSS_HASHTYPE_IP_TCP & 0x3) << 4) | + ((u64)(QLCNIC_RSS_HASHTYPE_IP_TCP & 0x3) << 6) | ((u64)(enable & 0x1) << 8) | - ((0x7ULL) << 48); + ((u64)QLCNIC_RSS_IND_TABLE_MASK << 48) | + (u64)QLCNIC_ENABLE_TYPE_C_RSS | + (u64)QLCNIC_RSS_FEATURE_FLAG; + req.words[0] = cpu_to_le64(word); for (i = 0; i < 5; i++) req.words[i+1] = cpu_to_le64(key[i]); -- cgit v0.10.2 From 9a97e7053a056679e33a4e23c98c5fbb6799e92a Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Fri, 25 Jan 2013 10:20:37 +0000 Subject: qlcnic: avoid mixed mode interrupts for some adapter types o Some adapter types do not support co-existence of Legacy Interrupt with MSI-x or MSI among multiple functions. For those adapters, prevent attaching to a function during normal load, if MSI-x or MSI vectors are not available. o Using module parameters use_msi=0 and use_msi_x=0, driver can be loaded in legacy mode for all functions in the adapter. Signed-off-by: Manish Chopra Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index e460401..5cbf8c6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -395,8 +395,9 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) return err; } -static void qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter) +static int qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter) { + int err = 0; u32 offset, mask_reg; const struct qlcnic_legacy_intr_set *legacy_intrp; struct qlcnic_hardware_context *ahw = adapter->ahw; @@ -409,8 +410,10 @@ static void qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter) offset); dev_info(&pdev->dev, "using msi interrupts\n"); adapter->msix_entries[0].vector = pdev->irq; - return; + return err; } + if (qlcnic_use_msi || qlcnic_use_msi_x) + return -EOPNOTSUPP; legacy_intrp = &legacy_intr[adapter->ahw->pci_func]; adapter->ahw->int_vec_bit = legacy_intrp->int_vec_bit; @@ -422,11 +425,12 @@ static void qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter) adapter->crb_int_state_reg = qlcnic_get_ioaddr(ahw, ISR_INT_STATE_REG); dev_info(&pdev->dev, "using legacy interrupts\n"); adapter->msix_entries[0].vector = pdev->irq; + return err; } int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) { - int num_msix, err; + int num_msix, err = 0; if (!num_intr) num_intr = QLCNIC_DEF_NUM_STS_DESC_RINGS; @@ -441,8 +445,11 @@ int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) if (err == -ENOMEM || !err) return err; - qlcnic_enable_msi_legacy(adapter); - return 0; + err = qlcnic_enable_msi_legacy(adapter); + if (!err) + return err; + + return -EIO; } void qlcnic_teardown_intr(struct qlcnic_adapter *adapter) @@ -1843,8 +1850,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) board_name, adapter->ahw->revision_id); } err = qlcnic_setup_intr(adapter, 0); - if (err) + if (err) { + dev_err(&pdev->dev, "Failed to setup interrupt\n"); goto err_out_disable_msi; + } if (qlcnic_83xx_check(adapter)) { err = qlcnic_83xx_setup_mbx_intr(adapter); @@ -2976,6 +2985,12 @@ static int qlcnic_attach_func(struct pci_dev *pdev) adapter->msix_entries = NULL; err = qlcnic_setup_intr(adapter, 0); + if (err) { + kfree(adapter->msix_entries); + netdev_err(netdev, "failed to setup interrupt\n"); + return err; + } + if (qlcnic_83xx_check(adapter)) { err = qlcnic_83xx_setup_mbx_intr(adapter); if (err) { @@ -3131,9 +3146,11 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data, size_t len) qlcnic_detach(adapter); qlcnic_teardown_intr(adapter); err = qlcnic_setup_intr(adapter, data); - if (err) - dev_err(&adapter->pdev->dev, - "failed setting max_rss; rss disabled\n"); + if (err) { + kfree(adapter->msix_entries); + netdev_err(netdev, "failed to setup interrupt\n"); + return err; + } if (qlcnic_83xx_check(adapter)) { err = qlcnic_83xx_setup_mbx_intr(adapter); -- cgit v0.10.2 From dbab22c1f177e4b0e6f6ce4913cb24118f2b8440 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 25 Jan 2013 10:20:38 +0000 Subject: qlcnic: Fix LED/Beaconing tests to work on all ports of an adapter. Provide port number in command payload for LED/Beaconing tests. Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 186fe6e..30be026 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -1380,7 +1380,7 @@ int qlcnic_82xx_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate) word = QLCNIC_H2C_OPCODE_CONFIG_LED | ((u64)adapter->portnum << 16); req.req_hdr = cpu_to_le64(word); - req.words[0] = cpu_to_le64((u64)rate << 32); + req.words[0] = cpu_to_le64(((u64)rate << 32) | adapter->portnum); req.words[1] = cpu_to_le64(state); rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1); -- cgit v0.10.2 From 1d9219ddb9a74ae80aa8d4f0492158224406c3fd Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Fri, 25 Jan 2013 10:20:39 +0000 Subject: qlcnic: sleeping function called from invalid context device eth0 entered promiscuous mode BUG: sleeping function called from invalid context at mm/slub.c:930 in_atomic(): 1, irqs_disabled(): 0, pid: 5911, name: brctl INFO: lockdep is turned off. Pid: 5911, comm: brctl Tainted: GF W O 3.6.0-0.rc7.git1.4.fc18.x86_64 #1 Call Trace: [] __might_sleep+0x18a/0x240 [] __kmalloc+0x67/0x2d0 [] ? qlcnic_alloc_lb_filters_mem+0x59/0xa0 [qlcnic] [] qlcnic_alloc_lb_filters_mem+0x59/0xa0 [qlcnic] [] qlcnic_set_multi+0x81/0x100 [qlcnic] [] __dev_set_rx_mode+0x5f/0xb0 [] dev_set_rx_mode+0x2f/0x50 [] dev_set_promiscuity+0x3c/0x50 [] br_add_if+0x1e8/0x400 [bridge] [] add_del_if+0x5f/0x90 [bridge] [] br_dev_ioctl+0x4b/0x90 [bridge] [] dev_ifsioc+0x373/0x3b0 [] dev_ioctl+0x13f/0x860 [] ? avc_has_perm_flags+0x31/0x2c0 [] sock_do_ioctl+0x5d/0x70 [] sock_ioctl+0x7d/0x2c0 [] ? inode_has_perm.isra.48.constprop.61+0x62/0xa0 [] do_vfs_ioctl+0x99/0x5a0 [] ? file_has_perm+0x97/0xb0 [] ? trace_hardirqs_on+0xd/0x10 [] sys_ioctl+0x99/0xa0 [] system_call_fastpath+0x16/0x1b br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 5cbf8c6..8b0f47a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2142,7 +2142,7 @@ void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter) } head = kcalloc(adapter->fhash.fbucket_size, - sizeof(struct hlist_head), GFP_KERNEL); + sizeof(struct hlist_head), GFP_ATOMIC); if (!head) return; -- cgit v0.10.2 From fe1adc6bf227d71997e85c5aba30d84c099aedf9 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Fri, 25 Jan 2013 10:20:40 +0000 Subject: qlcnic: add support for FDB netdevice ops. Providing communication channel between KVM and e-Switch so that it can be informed when hypervisor configures a MAC address and VLAN. qlcnic_mac_learn module param usage will be changed to: 0 = MAC learning is disable 1 = Driver learning is enable 2 = FDB learning is enable Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 35f3457..3260fb3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -746,6 +746,11 @@ struct qlcnic_mac_list_s { uint8_t mac_addr[ETH_ALEN+2]; }; +/* MAC Learn */ +#define NO_MAC_LEARN 0 +#define DRV_MAC_LEARN 1 +#define FDB_MAC_LEARN 2 + #define QLCNIC_HOST_REQUEST 0x13 #define QLCNIC_REQUEST 0x14 @@ -981,7 +986,8 @@ struct qlcnic_adapter { u8 mac_addr[ETH_ALEN]; u64 dev_rst_time; - u8 mac_learn; + bool drv_mac_learn; + bool fdb_mac_learn; unsigned long vlans[BITS_TO_LONGS(VLAN_N_VID)]; u8 flash_mfg_id; struct qlcnic_npar_info *npars; @@ -1421,6 +1427,8 @@ void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, struct qlcnic_host_rds_ring *rds_ring, u8 ring_id); int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max); void qlcnic_set_multi(struct net_device *netdev); +int qlcnic_nic_add_mac(struct qlcnic_adapter *, const u8 *); +int qlcnic_nic_del_mac(struct qlcnic_adapter *, const u8 *); void qlcnic_free_mac_list(struct qlcnic_adapter *adapter); int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 30be026..6c6ecfc 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -446,7 +446,29 @@ int qlcnic_82xx_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr, return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1); } -static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, const u8 *addr) +int qlcnic_nic_del_mac(struct qlcnic_adapter *adapter, const u8 *addr) +{ + struct list_head *head; + struct qlcnic_mac_list_s *cur; + int err = -EINVAL; + + /* Delete MAC from the existing list */ + list_for_each(head, &adapter->mac_list) { + cur = list_entry(head, struct qlcnic_mac_list_s, list); + if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) { + err = qlcnic_sre_macaddr_change(adapter, cur->mac_addr, + 0, QLCNIC_MAC_DEL); + if (err) + return err; + list_del(&cur->list); + kfree(cur); + return err; + } + } + return err; +} + +int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, const u8 *addr) { struct list_head *head; struct qlcnic_mac_list_s *cur; @@ -510,11 +532,11 @@ void qlcnic_set_multi(struct net_device *netdev) } send_fw_cmd: - if (mode == VPORT_MISS_MODE_ACCEPT_ALL) { + if (mode == VPORT_MISS_MODE_ACCEPT_ALL && !adapter->fdb_mac_learn) { qlcnic_alloc_lb_filters_mem(adapter); - adapter->mac_learn = 1; + adapter->drv_mac_learn = true; } else { - adapter->mac_learn = 0; + adapter->drv_mac_learn = false; } qlcnic_nic_set_promisc(adapter, mode); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 0033971..fdf3483 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -521,7 +521,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (unlikely(qlcnic_tx_pkt(adapter, first_desc, skb))) goto unwind_buff; - if (adapter->mac_learn) + if (adapter->drv_mac_learn) qlcnic_send_filter(adapter, first_desc, skb); adapter->stats.txbytes += skb->len; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 8b0f47a..e6b363a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -32,7 +32,8 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE " static int qlcnic_mac_learn; module_param(qlcnic_mac_learn, int, 0444); -MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)"); +MODULE_PARM_DESC(qlcnic_mac_learn, + "Mac Filter (0=learning is disabled, 1=Driver learning is enabled, 2=FDB learning is enabled)"); int qlcnic_use_msi = 1; MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled"); @@ -246,6 +247,77 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p) return 0; } +static int qlcnic_fdb_del(struct ndmsg *ndm, struct net_device *netdev, + const unsigned char *addr) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + int err = -EOPNOTSUPP; + + if (!adapter->fdb_mac_learn) { + pr_info("%s: Driver mac learn is enabled, FDB operation not allowed\n", + __func__); + return err; + } + + if (adapter->flags & QLCNIC_ESWITCH_ENABLED) { + if (is_unicast_ether_addr(addr)) + err = qlcnic_nic_del_mac(adapter, addr); + else if (is_multicast_ether_addr(addr)) + err = dev_mc_del(netdev, addr); + else + err = -EINVAL; + } + return err; +} + +static int qlcnic_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *netdev, + const unsigned char *addr, u16 flags) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + int err = 0; + + if (!adapter->fdb_mac_learn) { + pr_info("%s: Driver mac learn is enabled, FDB operation not allowed\n", + __func__); + return -EOPNOTSUPP; + } + + if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + pr_info("%s: FDB e-switch is not enabled\n", __func__); + return -EOPNOTSUPP; + } + + if (ether_addr_equal(addr, adapter->mac_addr)) + return err; + + if (is_unicast_ether_addr(addr)) + err = qlcnic_nic_add_mac(adapter, addr); + else if (is_multicast_ether_addr(addr)) + err = dev_mc_add_excl(netdev, addr); + else + err = -EINVAL; + + return err; +} + +static int qlcnic_fdb_dump(struct sk_buff *skb, struct netlink_callback *ncb, + struct net_device *netdev, int idx) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + + if (!adapter->fdb_mac_learn) { + pr_info("%s: Driver mac learn is enabled, FDB operation not allowed\n", + __func__); + return -EOPNOTSUPP; + } + + if (adapter->flags & QLCNIC_ESWITCH_ENABLED) + idx = ndo_dflt_fdb_dump(skb, ncb, netdev, idx); + + return idx; +} + static void qlcnic_82xx_cancel_idc_work(struct qlcnic_adapter *adapter) { while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) @@ -268,6 +340,9 @@ static const struct net_device_ops qlcnic_netdev_ops = { .ndo_tx_timeout = qlcnic_tx_timeout, .ndo_vlan_rx_add_vid = qlcnic_vlan_rx_add, .ndo_vlan_rx_kill_vid = qlcnic_vlan_rx_del, + .ndo_fdb_add = qlcnic_fdb_add, + .ndo_fdb_del = qlcnic_fdb_del, + .ndo_fdb_dump = qlcnic_fdb_dump, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = qlcnic_poll_controller, #endif @@ -1802,7 +1877,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->dev_rst_time = jiffies; adapter->ahw->revision_id = pdev->revision; - adapter->mac_learn = qlcnic_mac_learn; + if (qlcnic_mac_learn == FDB_MAC_LEARN) + adapter->fdb_mac_learn = true; + else if (qlcnic_mac_learn == DRV_MAC_LEARN) + adapter->drv_mac_learn = true; adapter->max_drv_tx_rings = 1; rwlock_init(&adapter->ahw->crb_lock); @@ -1893,7 +1971,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (qlcnic_get_act_pci_func(adapter)) goto err_out_disable_mbx_intr; - if (adapter->mac_learn) + if (adapter->drv_mac_learn) qlcnic_alloc_lb_filters_mem(adapter); qlcnic_add_sysfs(adapter); -- cgit v0.10.2 From 7a8feb4275739012a5a11488439d3c1b8e1ca809 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Fri, 25 Jan 2013 10:20:41 +0000 Subject: qlcnic: Bump up the version to 5.1.32 Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 3260fb3..f71aef5 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -37,9 +37,9 @@ #include "qlcnic_83xx_hw.h" #define _QLCNIC_LINUX_MAJOR 5 -#define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 31 -#define QLCNIC_LINUX_VERSIONID "5.1.31" +#define _QLCNIC_LINUX_MINOR 1 +#define _QLCNIC_LINUX_SUBVERSION 32 +#define QLCNIC_LINUX_VERSIONID "5.1.32" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v0.10.2 From 5588d3742da9900323dc3d766845a53bacdfb5ab Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Fri, 25 Jan 2013 00:00:58 +0000 Subject: Remove leftover #endif after introducing SO_REUSEPORT Commit 055dc21a1d (soreuseport: infrastructure) removed the #if 0 around SO_REUSEPORT without removing the corresponding #endif thus causing the header guard to close early. Cc: Tom Herbert Signed-off-by: Thomas Graf Signed-off-by: David S. Miller diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h index 7e27236..3e68bfb 100644 --- a/arch/mips/include/uapi/asm/socket.h +++ b/arch/mips/include/uapi/asm/socket.h @@ -29,7 +29,6 @@ socket to transmit pending data. */ #define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ -#endif #define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ #define SO_STYLE SO_TYPE /* Synonym */ -- cgit v0.10.2 From 9c5e0c0bbc5f683ada546af3c39a5a90b156a6f0 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Sat, 26 Jan 2013 07:50:54 +0000 Subject: soreuseport: fix use of uid in tb->fastuid Fix a reported compilation error where ia variable of type kuid_t was being set to zero. Eliminate two instances of setting tb->fastuid to zero. tb->fastuid is only used if tb->fastreuseport is set, so there should be no problem if tb->fastuid is not initialized (when tb->fastreuesport is zero). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 8bb623d..11cb497 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -204,7 +204,8 @@ tb_found: ret = 1; if (inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb, true)) { if (((sk->sk_reuse && sk->sk_state != TCP_LISTEN) || - (sk->sk_reuseport && uid_eq(tb->fastuid, uid))) && + (tb->fastreuseport > 0 && + sk->sk_reuseport && uid_eq(tb->fastuid, uid))) && smallest_size != -1 && --attempts >= 0) { spin_unlock(&head->lock); goto again; @@ -227,19 +228,15 @@ tb_not_found: if (sk->sk_reuseport) { tb->fastreuseport = 1; tb->fastuid = uid; - } else { + } else tb->fastreuseport = 0; - tb->fastuid = 0; - } } else { if (tb->fastreuse && (!sk->sk_reuse || sk->sk_state == TCP_LISTEN)) tb->fastreuse = 0; if (tb->fastreuseport && - (!sk->sk_reuseport || !uid_eq(tb->fastuid, uid))) { + (!sk->sk_reuseport || !uid_eq(tb->fastuid, uid))) tb->fastreuseport = 0; - tb->fastuid = 0; - } } success: if (!inet_csk(sk)->icsk_bind_hash) -- cgit v0.10.2 From a8fc18910b7f35a59345b5f5cd140c7f64d57d86 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 06:25:36 +0000 Subject: e1000e: fix ethtool offline register test for I217 The SHRAH[9] register on I217 has a different R/W bit-mask than RAR and SHRAL/H registers. Set R/W bit-mask appropriately for SHRAH[9] when testing the R/W ability of the register. Also, fix the error message log format so that it does not provide misleading information (i.e. the logged register address could be incorrect). Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index f268cbc..ceff1bf 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -760,8 +760,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, (test[pat] & write)); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); if (val != (test[pat] & write & mask)) { - e_err("pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", - reg + offset, val, (test[pat] & write & mask)); + e_err("pattern test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", + reg + (offset << 2), val, + (test[pat] & write & mask)); *data = reg; return 1; } @@ -776,7 +777,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { - e_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", + e_err("set/check test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; @@ -884,12 +885,20 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) E1000_FWSM_WLOCK_MAC_SHIFT; for (i = 0; i < mac->rar_entry_count; i++) { - /* Cannot test write-protected SHRAL[n] registers */ - if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) - continue; + if (mac->type == e1000_pch_lpt) { + /* Cannot test write-protected SHRAL[n] registers */ + if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) + continue; + + /* SHRAH[9] different than the others */ + if (i == 10) + mask |= (1 << 30); + else + mask &= ~(1 << 30); + } - REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), - mask, 0xFFFFFFFF); + REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask, + 0xFFFFFFFF); } for (i = 0; i < mac->mta_reg_count; i++) -- cgit v0.10.2 From 347b5201cb2e8b9e4a20d81582563f51336eb215 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 8 Dec 2012 00:35:35 +0000 Subject: e1000e: fix flow-control thresholds for jumbo frames on 82579/I217/I218 The previous static flow-control thresholds were causing unnecessary pause packets to be transmitted when jumbo frames are configured reducing the throughput. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index c15b7e4..8bb5d28 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3724,14 +3724,17 @@ void e1000e_reset(struct e1000_adapter *adapter) break; case e1000_pch2lan: case e1000_pch_lpt: - fc->high_water = 0x05C20; - fc->low_water = 0x05048; - fc->pause_time = 0x0650; fc->refresh_time = 0x0400; - if (adapter->netdev->mtu > ETH_DATA_LEN) { - pba = 14; - ew32(PBA, pba); + + if (adapter->netdev->mtu <= ETH_DATA_LEN) { + fc->high_water = 0x05C20; + fc->low_water = 0x05048; + fc->pause_time = 0x0650; + break; } + + fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; + fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; break; } -- cgit v0.10.2 From d89777bf0e42e7cb6ce8eae35190b9375c3b4211 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 19 Jan 2013 01:09:58 +0000 Subject: e1000e: add support for IEEE-1588 PTP Add PTP IEEE-1588 support and make accesible via the PHC subsystem. v2: make e1000e_ptp_clock_info a static const struct per Stephen Hemminger Cc: Stephen Hemminger Cc: Richard Cochran Signed-off-by: Bruce Allan Reviewed-by: Jacob Keller Acked-by: Richard Cochran Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 21353f0..3d5f6d4 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -74,6 +74,7 @@ config E1000E tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" depends on PCI && (!SPARC32 || BROKEN) select CRC32 + select PTP_1588_CLOCK ---help--- This driver supports the PCI-Express Intel(R) PRO/1000 gigabit ethernet family of adapters. For PCI or PCI-X e1000 adapters, diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile index 591b713..1da0faac 100644 --- a/drivers/net/ethernet/intel/e1000e/Makefile +++ b/drivers/net/ethernet/intel/e1000e/Makefile @@ -34,5 +34,5 @@ obj-$(CONFIG_E1000E) += e1000e.o e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \ mac.o manage.o nvm.o phy.o \ - param.o ethtool.o netdev.o + param.o ethtool.o netdev.o ptp.o diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 36f9fad..5cb7441 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -544,9 +544,20 @@ #define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ #define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A #define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ #define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ +#define E1000_RXMTRL_PTP_V1_SYNC_MESSAGE 0x00000000 +#define E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE 0x00010000 + +#define E1000_RXMTRL_PTP_V2_SYNC_MESSAGE 0x00000000 +#define E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE 0x01000000 + #define E1000_TIMINCA_INCPERIOD_SHIFT 24 #define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index dea9e55..bd58761 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -43,7 +43,8 @@ #include #include #include - +#include +#include #include "hw.h" struct e1000_info; @@ -413,6 +414,8 @@ struct e1000_adapter { spinlock_t systim_lock; /* protects SYSTIML/H regsters */ struct cyclecounter cc; struct timecounter tc; + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_info; }; struct e1000_info { @@ -427,6 +430,8 @@ struct e1000_info { const struct e1000_nvm_operations *nvm_ops; }; +s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); + /* The system time is maintained by a 64-bit counter comprised of the 32-bit * SYSTIMH and SYSTIML registers. How the counter increments (and therefore * its resolution) is based on the contents of the TIMINCA register - it @@ -704,6 +709,8 @@ extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); extern bool e1000_check_phy_82574(struct e1000_hw *hw); extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); +extern void e1000e_ptp_init(struct e1000_adapter *adapter); +extern void e1000e_ptp_remove(struct e1000_adapter *adapter); static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index ceff1bf..e3855bb 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -2209,8 +2209,20 @@ static int e1000e_get_ts_info(struct net_device *netdev, info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON); info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | (1 << HWTSTAMP_FILTER_ALL)); + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + return 0; } diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 8e7e803..84e6beb 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -251,6 +251,8 @@ enum e1e_registers { E1000_TSYNCRXCTL = 0x0B620, /* Rx Time Sync Control register - RW */ E1000_RXSTMPL = 0x0B624, /* Rx timestamp Low - RO */ E1000_RXSTMPH = 0x0B628, /* Rx timestamp High - RO */ + E1000_RXMTRL = 0x0B634, /* Timesync Rx EtherType and Msg Type - RW */ + E1000_RXUDP = 0x0B638, /* Timesync Rx UDP Port - RW */ }; #define E1000_MAX_PHY_ADDR 4 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 8bb5d28..34be756 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3413,7 +3413,7 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) * Get attributes for incrementing the System Time Register SYSTIML/H at * the default base frequency, and set the cyclecounter shift value. **/ -static s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) +s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) { struct e1000_hw *hw = &adapter->hw; u32 incvalue, incperiod, shift; @@ -3485,6 +3485,10 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) struct hwtstamp_config *config = &adapter->hwtstamp_config; u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; + u32 rxmtrl = 0; + u16 rxudp = 0; + bool is_l4 = false; + bool is_l2 = false; u32 regval; s32 ret_val; @@ -3509,7 +3513,69 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) case HWTSTAMP_FILTER_NONE: tsync_rx_ctl = 0; break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; + rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; + rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + /* Also time stamps V2 L2 Path Delay Request/Response */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; + is_l2 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + /* Also time stamps V2 L2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + /* Hardware cannot filter just V2 L4 Sync messages; + * fall-through to V2 (both L2 and L4) Sync. + */ + case HWTSTAMP_FILTER_PTP_V2_SYNC: + /* Also time stamps V2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + /* Hardware cannot filter just V2 L4 Delay Request messages; + * fall-through to V2 (both L2 and L4) Delay Request. + */ + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* Also time stamps V2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + /* Hardware cannot filter just V2 L4 or L2 Event messages; + * fall-through to all V2 (both L2 and L4) Events. + */ + case HWTSTAMP_FILTER_PTP_V2_EVENT: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + /* For V1, the hardware can only filter Sync messages or + * Delay Request messages but not both so fall-through to + * time stamp all packets. + */ case HWTSTAMP_FILTER_ALL: + is_l2 = true; + is_l4 = true; tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL; config->rx_filter = HWTSTAMP_FILTER_ALL; break; @@ -3541,6 +3607,22 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) return -EAGAIN; } + /* L2: define ethertype filter for time stamped packets */ + if (is_l2) + rxmtrl |= ETH_P_1588; + + /* define which PTP packets get time stamped */ + ew32(RXMTRL, rxmtrl); + + /* Filter by destination port */ + if (is_l4) { + rxudp = PTP_EV_PORT; + cpu_to_be16s(&rxudp); + } + ew32(RXUDP, rxudp); + + e1e_flush(); + /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ regval = er32(RXSTMPH); regval = er32(TXSTMPH); @@ -5665,6 +5747,24 @@ static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) config = adapter->hwtstamp_config; + switch (config.rx_filter) { + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* With V2 type filters which specify a Sync or Delay Request, + * Path Delay Request/Response messages are also time stamped + * by hardware so notify the caller the requested packets plus + * some others are time stamped. + */ + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + default: + break; + } + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; } @@ -6672,6 +6772,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); + /* init PTP hardware clock */ + e1000e_ptp_init(adapter); + e1000_print_device_info(adapter); if (pci_dev_run_wake(pdev)) @@ -6720,6 +6823,8 @@ static void e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); bool down = test_bit(__E1000_DOWN, &adapter->state); + e1000e_ptp_remove(adapter); + /* The timers may be rescheduled, so explicitly disable them * from being rescheduled. */ diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c new file mode 100644 index 0000000..32da00c --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -0,0 +1,276 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* PTP 1588 Hardware Clock (PHC) + * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb) + * Copyright (C) 2011 Richard Cochran + */ + +#include "e1000.h" + +/** + * e1000e_phc_adjfreq - adjust the frequency of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired frequency change in parts per billion + * + * Adjust the frequency of the PHC cycle counter by the indicated delta from + * the base frequency. + **/ +static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + struct e1000_hw *hw = &adapter->hw; + bool neg_adj = false; + u64 adjustment; + u32 timinca, incvalue; + s32 ret_val; + + if ((delta > ptp->max_adj) || (delta <= -1000000000)) + return -EINVAL; + + if (delta < 0) { + neg_adj = true; + delta = -delta; + } + + /* Get the System Time Register SYSTIM base frequency */ + ret_val = e1000e_get_base_timinca(adapter, &timinca); + if (ret_val) + return ret_val; + + incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK; + + adjustment = incvalue; + adjustment *= delta; + adjustment = div_u64(adjustment, 1000000000); + + incvalue = neg_adj ? (incvalue - adjustment) : (incvalue + adjustment); + + timinca &= ~E1000_TIMINCA_INCVALUE_MASK; + timinca |= incvalue; + + ew32(TIMINCA, timinca); + + return 0; +} + +/** + * e1000e_phc_adjtime - Shift the time of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired change in nanoseconds + * + * Adjust the timer by resetting the timecounter structure. + **/ +static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + s64 now; + + spin_lock_irqsave(&adapter->systim_lock, flags); + now = timecounter_read(&adapter->tc); + now += delta; + timecounter_init(&adapter->tc, &adapter->cc, now); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +/** + * e1000e_phc_gettime - Reads the current time from the hardware clock + * @ptp: ptp clock structure + * @ts: timespec structure to hold the current time value + * + * Read the timecounter and return the correct value in ns after converting + * it into a struct timespec. + **/ +static int e1000e_phc_gettime(struct ptp_clock_info *ptp, struct timespec *ts) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + u32 remainder; + u64 ns; + + spin_lock_irqsave(&adapter->systim_lock, flags); + ns = timecounter_read(&adapter->tc); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + ts->tv_sec = div_u64_rem(ns, NSEC_PER_SEC, &remainder); + ts->tv_nsec = remainder; + + return 0; +} + +/** + * e1000e_phc_settime - Set the current time on the hardware clock + * @ptp: ptp clock structure + * @ts: timespec containing the new time for the cycle counter + * + * Reset the timecounter to use a new base value instead of the kernel + * wall timer value. + **/ +static int e1000e_phc_settime(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + u64 ns; + + ns = ts->tv_sec * NSEC_PER_SEC; + ns += ts->tv_nsec; + + /* reset the timecounter */ + spin_lock_irqsave(&adapter->systim_lock, flags); + timecounter_init(&adapter->tc, &adapter->cc, ns); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +/** + * e1000e_phc_enable - enable or disable an ancillary feature + * @ptp: ptp clock structure + * @request: Desired resource to enable or disable + * @on: Caller passes one to enable or zero to disable + * + * Enable (or disable) ancillary features of the PHC subsystem. + * Currently, no ancillary features are supported. + **/ +static int e1000e_phc_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *request, int on) +{ + return -EOPNOTSUPP; +} + +static void e1000e_systim_overflow_work(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, + systim_overflow_work.work); + struct e1000_hw *hw = &adapter->hw; + struct timespec ts; + + adapter->ptp_clock_info.gettime(&adapter->ptp_clock_info, &ts); + + e_dbg("SYSTIM overflow check at %ld.%09lu\n", ts.tv_sec, ts.tv_nsec); + + schedule_delayed_work(&adapter->systim_overflow_work, + E1000_SYSTIM_OVERFLOW_PERIOD); +} + +static const struct ptp_clock_info e1000e_ptp_clock_info = { + .owner = THIS_MODULE, + .n_alarm = 0, + .n_ext_ts = 0, + .n_per_out = 0, + .pps = 0, + .adjfreq = e1000e_phc_adjfreq, + .adjtime = e1000e_phc_adjtime, + .gettime = e1000e_phc_gettime, + .settime = e1000e_phc_settime, + .enable = e1000e_phc_enable, +}; + +/** + * e1000e_ptp_init - initialize PTP for devices which support it + * @adapter: board private structure + * + * This function performs the required steps for enabling PTP support. + * If PTP support has already been loaded it simply calls the cyclecounter + * init routine and exits. + **/ +void e1000e_ptp_init(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + adapter->ptp_clock = NULL; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return; + + adapter->ptp_clock_info = e1000e_ptp_clock_info; + + snprintf(adapter->ptp_clock_info.name, + sizeof(adapter->ptp_clock_info.name), "%pm", + adapter->netdev->perm_addr); + + switch (hw->mac.type) { + case e1000_pch2lan: + case e1000_pch_lpt: + if ((hw->mac.type != e1000_pch_lpt) || + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + adapter->ptp_clock_info.max_adj = 24000000 - 1; + break; + } + /* fall-through */ + case e1000_82574: + case e1000_82583: + adapter->ptp_clock_info.max_adj = 600000000 - 1; + break; + default: + break; + } + + INIT_DELAYED_WORK(&adapter->systim_overflow_work, + e1000e_systim_overflow_work); + + schedule_delayed_work(&adapter->systim_overflow_work, + E1000_SYSTIM_OVERFLOW_PERIOD); + + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info, + &adapter->pdev->dev); + if (IS_ERR(adapter->ptp_clock)) { + adapter->ptp_clock = NULL; + e_err("ptp_clock_register failed\n"); + } else { + e_info("registered PHC clock\n"); + } +} + +/** + * e1000e_ptp_remove - disable PTP device and stop the overflow check + * @adapter: board private structure + * + * Stop the PTP support, and cancel the delayed work. + **/ +void e1000e_ptp_remove(struct e1000_adapter *adapter) +{ + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return; + + cancel_delayed_work_sync(&adapter->systim_overflow_work); + + if (adapter->ptp_clock) { + ptp_clock_unregister(adapter->ptp_clock); + adapter->ptp_clock = NULL; + e_info("removed PHC\n"); + } +} -- cgit v0.10.2 From 94fb848bf43fae3410639fb2110a783200e9e1da Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 23 Jan 2013 09:00:03 +0000 Subject: e1000e: enable ECC on I217/I218 to catch packet buffer memory errors In rare instances, memory errors have been detected in the internal packet buffer memory on I217/I218 when stressed under certain environmental conditions. Enable Error Correcting Code (ECC) in hardware to catch both correctable and uncorrectable errors. Correctable errors will be handled by the hardware. Uncorrectable errors in the packet buffer will cause the packet to be received with an error indication in the buffer descriptor causing the packet to be discarded. If the uncorrectable error is in the descriptor itself, the hardware will stop and interrupt the driver indicating the error. The driver will then reset the hardware in order to clear the error and restart. Both types of errors will be accounted for in statistics counters. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 5cb7441..f045231 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -233,6 +233,7 @@ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */ #define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */ +#define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ @@ -394,6 +395,12 @@ #define E1000_PBS_16K E1000_PBA_16K +/* Uncorrectable/correctable ECC Error counts and enable bits */ +#define E1000_PBECCSTS_CORR_ERR_CNT_MASK 0x000000FF +#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK 0x0000FF00 +#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT 8 +#define E1000_PBECCSTS_ECC_ENABLE 0x00010000 + #define IFS_MAX 80 #define IFS_MIN 40 #define IFS_RATIO 4 @@ -413,6 +420,7 @@ #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ #define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */ #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ @@ -448,6 +456,7 @@ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */ #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ #define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index bd58761..c96e6fc 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -312,6 +312,8 @@ struct e1000_adapter { struct napi_struct napi; + unsigned int uncorr_errors; /* uncorrectable ECC errors */ + unsigned int corr_errors; /* correctable ECC errors */ unsigned int restart_queue; u32 txd_cmd; diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index e3855bb..124821b 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -109,6 +109,8 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("rx_dma_failed", rx_dma_failed), E1000_STAT("tx_dma_failed", tx_dma_failed), E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), + E1000_STAT("uncorr_ecc_errors", uncorr_errors), + E1000_STAT("corr_ecc_errors", corr_errors), }; #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 84e6beb..4bd49be 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -79,6 +79,7 @@ enum e1e_registers { #define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */ E1000_PBS = 0x01008, /* Packet Buffer Size */ + E1000_PBECCSTS = 0x0100C, /* Packet Buffer ECC Status - RW */ E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */ E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */ E1000_FLOP = 0x0103C, /* FLASH Opcode Register */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 50935ef..56cbfa7 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -3704,6 +3704,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_ich8lan) reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); ew32(RFCTL, reg); + + /* Enable ECC on Lynxpoint */ + if (hw->mac.type == e1000_pch_lpt) { + reg = er32(PBECCSTS); + reg |= E1000_PBECCSTS_ECC_ENABLE; + ew32(PBECCSTS, reg); + + reg = er32(CTRL); + reg |= E1000_CTRL_MEHE; + ew32(CTRL, reg); + } } /** diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 34be756..4c7e9fe 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1780,6 +1780,23 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -1843,6 +1860,23 @@ static irqreturn_t e1000_intr(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -2206,6 +2240,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + } else if (hw->mac.type == e1000_pch_lpt) { + ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { ew32(IMS, IMS_ENABLE_MASK); } @@ -4619,6 +4655,16 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); + + /* Correctable ECC Errors */ + if (hw->mac.type == e1000_pch_lpt) { + u32 pbeccsts = er32(PBECCSTS); + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + } } /** -- cgit v0.10.2 From 6e928b721c73817cd20f7dc7a303b3b7e57bff1d Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 12 Dec 2012 04:45:51 +0000 Subject: e1000e: prevent hardware from automatically configuring PHY on I217/I218 As done with the previous generation managed 82579, prevent the PHY from being put into an unknown state by blocking the hardware from automatically configuring the PHY as done with the previous generation managed 82579. Instead, the driver should configure the PHY with contents of the EEPROM image. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 56cbfa7..9a93223 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -363,10 +363,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) s32 ret_val; u16 phy_reg; + /* Gate automatic PHY configuration by hardware on managed and + * non-managed 82579 and newer adapters. + */ + e1000_gate_hw_phy_config_ich8lan(hw, true); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); - return ret_val; + goto out; } /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is @@ -387,13 +392,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: - /* Gate automatic PHY configuration by hardware on - * non-managed 82579 - */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - if (e1000_phy_is_accessible_pchlan(hw)) { if (hw->mac.type == e1000_pch_lpt) { /* Unforce SMBus mode in PHY */ @@ -461,6 +459,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) */ ret_val = e1000e_phy_hw_reset_generic(hw); +out: /* Ungate automatic PHY configuration on non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { @@ -763,13 +762,6 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Gate automatic PHY configuration by hardware on managed - * 82579 and i217 - */ - if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) && - (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - return 0; } -- cgit v0.10.2 From fc915e93226cf00f4b8d1263ce2711959f9b1b76 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 29 Dec 2012 09:08:50 +0000 Subject: e1000e: remove prototype of non-existent function Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index c96e6fc..b8020b8 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -563,8 +563,6 @@ extern void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr); extern unsigned int copybreak; -extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw); - extern const struct e1000_info e1000_82571_info; extern const struct e1000_info e1000_82572_info; extern const struct e1000_info e1000_82573_info; -- cgit v0.10.2 From bf67044bf86d9b5613cdba9d7d04deb4ea08892e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 1 Jan 2013 16:00:01 +0000 Subject: e1000e: update copyright date Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index e73c2c3..97ff50e 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 587890d..e9d9bef 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile index 1da0faac..c2dcfcc 100644 --- a/drivers/net/ethernet/intel/e1000e/Makefile +++ b/drivers/net/ethernet/intel/e1000e/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel PRO/1000 Linux driver -# Copyright(c) 1999 - 2012 Intel Corporation. +# Copyright(c) 1999 - 2013 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index f045231..3b99719 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index b8020b8..c7bc610 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 124821b..4262b4d 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 4bd49be..0a08b14 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9a93223..c25678d 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 0fa4c06..d21f749 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c index 6dc47be..4dae0db 100644 --- a/drivers/net/ethernet/intel/e1000e/manage.c +++ b/drivers/net/ethernet/intel/e1000e/manage.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 4c7e9fe..12784e8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -7045,7 +7045,7 @@ static int __init e1000_init_module(void) int ret; pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright(c) 1999 - 2012 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2013 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index 1e7882c..84fecc2 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index b29a8a5..19c40d6 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 28b38ff..70f7593 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index 32da00c..6b8df65 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, -- cgit v0.10.2 From ed1a42656aa794aa3d6edf5ca83f98835701dc41 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 4 Jan 2013 09:51:36 +0000 Subject: e1000e: correct maximum frame size on i217/i218 The largest jumbo frame supported by the i217 and i218 hardware is 9018. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index c25678d..e0f41f0 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4633,7 +4633,7 @@ const struct e1000_info e1000_pch_lpt_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, -- cgit v0.10.2 From 4e03510b4779851db7e9153368d1f856e66ea239 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 4 Jan 2013 09:53:19 +0000 Subject: e1000e: fix PHY init workarounds for i217/i218 Toggling the LANPHYPC Value bit cycles the power on the PHY and sets it back to power-on defaults. This includes setting it's MAC-PHY messaging mode to use the PCIe-like interconnect, so the MAC must also be set back from SMBus mode to PCIe mode otherwise the PHY can be inaccessible. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index e0f41f0..3f3477f 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -426,6 +426,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; ew32(FEXTNVM3, mac_reg); + if (hw->mac.type == e1000_pch_lpt) { + /* Toggling LANPHYPC brings the PHY out of SMBus mode + * So ensure that the MAC is also out of SMBus mode + */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } + /* Toggle LANPHYPC Value bit */ mac_reg = er32(CTRL); mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; -- cgit v0.10.2 From d394998072d05fe694e85ae544e530da964da9f8 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 4 Jan 2013 09:54:11 +0000 Subject: e1000e: remove definition of struct which is no longer used The e1000e driver has been converted to use extended descriptors instead of the older legacy descriptor type. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 0a08b14..a10de4d 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -542,16 +542,6 @@ enum e1000_serdes_link_state { e1000_serdes_link_forced_up }; -/* Receive Descriptor */ -struct e1000_rx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ - __le16 special; -}; - /* Receive Descriptor - Extended */ union e1000_rx_desc_extended { struct { -- cgit v0.10.2 From 9d57088be9f1d166d6ca311218611a51cd3ecfc2 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 4 Jan 2013 10:06:03 +0000 Subject: e1000e: add comment to spinlock_t definition Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index c7bc610..e6b9483 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -372,7 +372,7 @@ struct e1000_adapter { /* structs defined in e1000_hw.h */ struct e1000_hw hw; - spinlock_t stats64_lock; + spinlock_t stats64_lock; /* protects statistics counters */ struct e1000_hw_stats stats; struct e1000_phy_info phy_info; struct e1000_phy_stats phy_stats; -- cgit v0.10.2 From 1f96012d34670202c135828482fffbf603b4dce0 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 03:06:54 +0000 Subject: e1000e: cleanup: remove unnecessary function prototypes ...and cleanup some whitespace in other prototypes. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 97ff50e..a2b5b44 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -111,11 +111,10 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw); static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw); static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex); -static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw); -static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, - u16 *data); -static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, - u16 data); +static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, + u16 *data); +static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, + u16 data); static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw); /** diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index e9d9bef..c2c23d2 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -67,9 +67,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); -static s32 e1000_setup_link_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); -static void e1000_clear_vfta_82571(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 3f3477f..3795ac6 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -237,7 +237,6 @@ union ich8_flash_protected_range { u32 regval; }; -static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); @@ -249,9 +248,7 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); -static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); @@ -263,7 +260,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); -static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 70f7593..3b97121 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -32,12 +32,11 @@ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); static s32 e1000_wait_autoneg(struct e1000_hw *hw); -static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg); static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read, bool page_set); static u32 e1000_get_phy_addr_for_hv_page(u32 page); static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, - u16 *data, bool read); + u16 *data, bool read); /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { -- cgit v0.10.2 From 7dbbe5d5a5073d590790007d5b98d7fd51fd2ff5 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 05:08:31 +0000 Subject: e1000e: do not ignore variables which get set a value Static analysis with cppcheck has shown a few instances of a variable which is assigned a value that is never used. A number of these are the return status of various driver function calls which should be passed back to the caller of the current function. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index a2b5b44..aa5e4cf 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -773,6 +773,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ctrl = er32(CTRL); ret_val = e1000_acquire_phy_80003es2lan(hw); + if (ret_val) + return ret_val; + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); e1000_release_phy_80003es2lan(hw); @@ -832,6 +835,8 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) /* Setup link and flow control */ ret_val = mac->ops.setup_link(hw); + if (ret_val) + return ret_val; /* Disable IBIST slave mode (far-end loopback) */ e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c2c23d2..d48143f 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -554,16 +554,14 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) s32 i = 0; extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; do { + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; ew32(EXTCNF_CTRL, extcnf_ctrl); extcnf_ctrl = er32(EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) break; - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - usleep_range(2000, 4000); i++; } while (i < MDIO_OWNERSHIP_TIMEOUT); @@ -935,6 +933,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -1797,6 +1797,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); + if (ret_val) + return ret_val; } } diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 3795ac6..13f8fa0 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -2342,6 +2342,8 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -4053,8 +4055,7 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) if (ret_val) return; reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); + e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data); } /** diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 3b97121..b4aaf69 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -3332,7 +3332,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) I82577_DSTATUS_CABLE_LENGTH_SHIFT; if (length == E1000_CABLE_LENGTH_UNDEFINED) - ret_val = -E1000_ERR_PHY; + return -E1000_ERR_PHY; phy->cable_length = length; -- cgit v0.10.2 From 70806a7fd1ae8942675bb2d415899e9e64440505 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 05:08:37 +0000 Subject: e1000e: cleanup: do not assign a variable a value when not necessary Static analysis with cppcheck has shown a few instances of a variable being reassigned a value before the old one has been used. None of these ever require the old value to be used so remove the old values. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index aa5e4cf..ae96fac 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -695,7 +695,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; + s32 ret_val; u16 phy_data, index; ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data); @@ -1276,7 +1276,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data) { u32 kmrnctrlsta; - s32 ret_val = 0; + s32 ret_val; ret_val = e1000_acquire_mac_csr_80003es2lan(hw); if (ret_val) @@ -1311,7 +1311,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data) { u32 kmrnctrlsta; - s32 ret_val = 0; + s32 ret_val; ret_val = e1000_acquire_mac_csr_80003es2lan(hw); if (ret_val) @@ -1335,7 +1335,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, **/ static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw) { - s32 ret_val = 0; + s32 ret_val; /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index d48143f..0f55d79 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1397,7 +1397,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) { u16 status_1kbt = 0; u16 receive_errors = 0; - s32 ret_val = 0; + s32 ret_val; /* Read PHY Receive Error counter first, if its is max - all F's then * read the Base1000T status register If both are max then PHY is hung. @@ -1542,7 +1542,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ctrl = er32(CTRL); status = er32(STATUS); - rxcw = er32(RXCW); + er32(RXCW); /* SYNCH bit and IV bit are sticky */ udelay(10); rxcw = er32(RXCW); @@ -1812,7 +1812,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) { if (hw->mac.type == e1000_82571) { - s32 ret_val = 0; + s32 ret_val; /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 4262b4d..6ab949d 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1405,7 +1405,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl = er32(CTRL); - int link = 0; + int link; /* special requirements for 82571/82572 fiber adapters */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 13f8fa0..87676b6 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -485,7 +485,7 @@ out: static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; + s32 ret_val; phy->addr = 1; phy->reset_delay_us = 100; @@ -783,7 +783,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, u16 *data, bool read) { - s32 ret_val = 0; + s32 ret_val; ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address); if (ret_val) @@ -1387,7 +1387,7 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw) u32 strap = er32(STRAP); u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >> E1000_STRAP_SMT_FREQ_SHIFT; - s32 ret_val = 0; + s32 ret_val; strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; @@ -1623,7 +1623,7 @@ release: **/ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) { - s32 ret_val = 0; + s32 ret_val; u32 ctrl_reg = 0; u32 ctrl_ext = 0; u32 reg = 0; @@ -2284,7 +2284,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) { - s32 ret_val = 0; + s32 ret_val; u16 oem_reg; ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index d21f749..0709f49 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -165,7 +165,7 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) { u32 i; - s32 ret_val = 0; + s32 ret_val; u16 offset, nvm_alt_mac_addr_offset, nvm_data; u8 alt_mac_addr[ETH_ALEN]; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 12784e8..e386e95 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3660,8 +3660,8 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) e1e_flush(); /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ - regval = er32(RXSTMPH); - regval = er32(TXSTMPH); + er32(RXSTMPH); + er32(TXSTMPH); /* Get and set the System Time Register SYSTIM base frequency */ ret_val = e1000e_get_base_timinca(adapter, ®val); @@ -5834,7 +5834,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) struct e1000_hw *hw = &adapter->hw; u32 i, mac_reg; u16 phy_reg, wuc_enable; - int retval = 0; + int retval; /* copy MAC RARs to PHY RARs */ e1000_copy_rx_addrs_to_phy_ich8lan(hw); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index b4aaf69..44fb432 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2671,7 +2671,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) **/ s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) { - s32 ret_val = 0; + s32 ret_val; /* Select Port Control Registers page */ ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); @@ -3103,8 +3103,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) { s32 ret_val; - u32 addr_reg = 0; - u32 data_reg = 0; + u32 addr_reg; + u32 data_reg; /* This takes care of the difference with desktop vs mobile phy */ addr_reg = (hw->phy.type == e1000_phy_82578) ? -- cgit v0.10.2 From 4bf613c6d87399e3c8a4d5e14281456b6959d8fd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Jan 2013 20:40:56 +0000 Subject: irda: buffer overflow in irnet_ctrl_read() The comments here say that the /* Max event is 61 char */ but in 2003 we changed the event format and now the max event size is 75. The longest event is: "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n", 12345678901 23 456789012 34567890 1 2 3 +8 +21 +8 +2 +2 +1 = 75 characters. There was a check to return -EOVERFLOW if the user gave us a "count" value that was less than 64. Raising it to 75 might break backwards compatability. Instead I removed the check and now it returns a truncated string if "count" is too low. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 2bb2beb..3c83a1e 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -214,8 +214,7 @@ irnet_get_discovery_log(irnet_socket * ap) * After reading : discoveries = NULL ; disco_index = Y ; disco_number = -1 */ static inline int -irnet_read_discovery_log(irnet_socket * ap, - char * event) +irnet_read_discovery_log(irnet_socket *ap, char *event, int buf_size) { int done_event = 0; @@ -237,12 +236,13 @@ irnet_read_discovery_log(irnet_socket * ap, if(ap->disco_index < ap->disco_number) { /* Write an event */ - sprintf(event, "Found %08x (%s) behind %08x {hints %02X-%02X}\n", - ap->discoveries[ap->disco_index].daddr, - ap->discoveries[ap->disco_index].info, - ap->discoveries[ap->disco_index].saddr, - ap->discoveries[ap->disco_index].hints[0], - ap->discoveries[ap->disco_index].hints[1]); + snprintf(event, buf_size, + "Found %08x (%s) behind %08x {hints %02X-%02X}\n", + ap->discoveries[ap->disco_index].daddr, + ap->discoveries[ap->disco_index].info, + ap->discoveries[ap->disco_index].saddr, + ap->discoveries[ap->disco_index].hints[0], + ap->discoveries[ap->disco_index].hints[1]); DEBUG(CTRL_INFO, "Writing discovery %d : %s\n", ap->disco_index, ap->discoveries[ap->disco_index].info); @@ -282,27 +282,24 @@ irnet_ctrl_read(irnet_socket * ap, size_t count) { DECLARE_WAITQUEUE(wait, current); - char event[64]; /* Max event is 61 char */ + char event[75]; ssize_t ret = 0; DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count); - /* Check if we can write an event out in one go */ - DABORT(count < sizeof(event), -EOVERFLOW, CTRL_ERROR, "Buffer to small.\n"); - #ifdef INITIAL_DISCOVERY /* Check if we have read the log */ - if(irnet_read_discovery_log(ap, event)) + if (irnet_read_discovery_log(ap, event, sizeof(event))) { - /* We have an event !!! Copy it to the user */ - if(copy_to_user(buf, event, strlen(event))) + count = min(strlen(event), count); + if (copy_to_user(buf, event, count)) { DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); return -EFAULT; } DEXIT(CTRL_TRACE, "\n"); - return strlen(event); + return count; } #endif /* INITIAL_DISCOVERY */ @@ -339,79 +336,81 @@ irnet_ctrl_read(irnet_socket * ap, switch(irnet_events.log[ap->event_index].event) { case IRNET_DISCOVER: - sprintf(event, "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].saddr, - irnet_events.log[ap->event_index].hints.byte[0], - irnet_events.log[ap->event_index].hints.byte[1]); + snprintf(event, sizeof(event), + "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].saddr, + irnet_events.log[ap->event_index].hints.byte[0], + irnet_events.log[ap->event_index].hints.byte[1]); break; case IRNET_EXPIRE: - sprintf(event, "Expired %08x (%s) behind %08x {hints %02X-%02X}\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].saddr, - irnet_events.log[ap->event_index].hints.byte[0], - irnet_events.log[ap->event_index].hints.byte[1]); + snprintf(event, sizeof(event), + "Expired %08x (%s) behind %08x {hints %02X-%02X}\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].saddr, + irnet_events.log[ap->event_index].hints.byte[0], + irnet_events.log[ap->event_index].hints.byte[1]); break; case IRNET_CONNECT_TO: - sprintf(event, "Connected to %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); + snprintf(event, sizeof(event), "Connected to %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); break; case IRNET_CONNECT_FROM: - sprintf(event, "Connection from %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); + snprintf(event, sizeof(event), "Connection from %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); break; case IRNET_REQUEST_FROM: - sprintf(event, "Request from %08x (%s) behind %08x\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].saddr); + snprintf(event, sizeof(event), "Request from %08x (%s) behind %08x\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].saddr); break; case IRNET_NOANSWER_FROM: - sprintf(event, "No-answer from %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); + snprintf(event, sizeof(event), "No-answer from %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); break; case IRNET_BLOCKED_LINK: - sprintf(event, "Blocked link with %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); + snprintf(event, sizeof(event), "Blocked link with %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); break; case IRNET_DISCONNECT_FROM: - sprintf(event, "Disconnection from %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); + snprintf(event, sizeof(event), "Disconnection from %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); break; case IRNET_DISCONNECT_TO: - sprintf(event, "Disconnected to %08x (%s)\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name); + snprintf(event, sizeof(event), "Disconnected to %08x (%s)\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name); break; default: - sprintf(event, "Bug\n"); + snprintf(event, sizeof(event), "Bug\n"); } /* Increment our event index */ ap->event_index = (ap->event_index + 1) % IRNET_MAX_EVENTS; DEBUG(CTRL_INFO, "Event is :%s", event); - /* Copy it to the user */ - if(copy_to_user(buf, event, strlen(event))) + count = min(strlen(event), count); + if (copy_to_user(buf, event, count)) { DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); return -EFAULT; } DEXIT(CTRL_TRACE, "\n"); - return strlen(event); + return count; } /*------------------------------------------------------------------*/ -- cgit v0.10.2 From a1b1add07fa794974573d93483d68e373edfe7bd Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2013 09:24:19 +0000 Subject: gro: Fix kcalloc argument order First number, then size. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/include/net/gro_cells.h b/include/net/gro_cells.h index e5062c9..734d9b5 100644 --- a/include/net/gro_cells.h +++ b/include/net/gro_cells.h @@ -73,8 +73,8 @@ static inline int gro_cells_init(struct gro_cells *gcells, struct net_device *de int i; gcells->gro_cells_mask = roundup_pow_of_two(netif_get_num_default_rss_queues()) - 1; - gcells->cells = kcalloc(sizeof(struct gro_cell), - gcells->gro_cells_mask + 1, + gcells->cells = kcalloc(gcells->gro_cells_mask + 1, + sizeof(struct gro_cell), GFP_KERNEL); if (!gcells->cells) return -ENOMEM; -- cgit v0.10.2 From 2d51837fa1ee7ff5c42f34b07dc460daff6afda1 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 24 Jan 2013 01:54:14 +0000 Subject: net/mlx4_en: Issue the dump eth statistics command under lock Performing the DUMP_ETH_STATS firmware command outside the lock leads to kernel panic when data structures such as RX/TX rings are freed in parallel, e.g when one changes the mtu or ring sizes. Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index b467513..b6c645f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -977,12 +977,12 @@ static void mlx4_en_do_get_stats(struct work_struct *work) struct mlx4_en_dev *mdev = priv->mdev; int err; - err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0); - if (err) - en_dbg(HW, priv, "Could not update stats\n"); - mutex_lock(&mdev->state_lock); if (mdev->device_up) { + err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0); + if (err) + en_dbg(HW, priv, "Could not update stats\n"); + if (priv->port_up) mlx4_en_auto_moderation(priv); -- cgit v0.10.2 From db0e7cba6dafa269f33f379997794a9d3bd4d535 Mon Sep 17 00:00:00 2001 From: Aviad Yehezkel Date: Thu, 24 Jan 2013 01:54:15 +0000 Subject: net/mlx4_en: Fix traffic loss under promiscuous mode When port is stopped and flow steering mode is not device managed: promisc QP rule wasn't removed from MCG table. Added code to remove it in all flow steering modes. In addition, promsic rule removal should be in stop port and not in start port - moved it accordingly. Signed-off-by: Aviad Yehezkel Signed-off-by: Eugenia Emantayev Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index b6c645f..bab8cec 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1167,15 +1167,6 @@ int mlx4_en_start_port(struct net_device *dev) /* Must redo promiscuous mode setup. */ priv->flags &= ~(MLX4_EN_FLAG_PROMISC | MLX4_EN_FLAG_MC_PROMISC); - if (mdev->dev->caps.steering_mode == - MLX4_STEERING_MODE_DEVICE_MANAGED) { - mlx4_flow_steer_promisc_remove(mdev->dev, - priv->port, - MLX4_FS_PROMISC_UPLINK); - mlx4_flow_steer_promisc_remove(mdev->dev, - priv->port, - MLX4_FS_PROMISC_ALL_MULTI); - } /* Schedule multicast task to populate multicast list */ queue_work(mdev->workqueue, &priv->mcast_task); @@ -1227,6 +1218,32 @@ void mlx4_en_stop_port(struct net_device *dev) /* Set port as not active */ priv->port_up = false; + /* Promsicuous mode */ + if (mdev->dev->caps.steering_mode == + MLX4_STEERING_MODE_DEVICE_MANAGED) { + priv->flags &= ~(MLX4_EN_FLAG_PROMISC | + MLX4_EN_FLAG_MC_PROMISC); + mlx4_flow_steer_promisc_remove(mdev->dev, + priv->port, + MLX4_FS_PROMISC_UPLINK); + mlx4_flow_steer_promisc_remove(mdev->dev, + priv->port, + MLX4_FS_PROMISC_ALL_MULTI); + } else if (priv->flags & MLX4_EN_FLAG_PROMISC) { + priv->flags &= ~MLX4_EN_FLAG_PROMISC; + + /* Disable promiscouos mode */ + mlx4_unicast_promisc_remove(mdev->dev, priv->base_qpn, + priv->port); + + /* Disable Multicast promisc */ + if (priv->flags & MLX4_EN_FLAG_MC_PROMISC) { + mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn, + priv->port); + priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; + } + } + /* Detach All multicasts */ memset(&mc_list[10], 0xff, ETH_ALEN); mc_list[5] = priv->port; /* needed for B0 steering support */ -- cgit v0.10.2 From dbd501a80671180a8f3cdf93ca465959031fef18 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 24 Jan 2013 01:54:16 +0000 Subject: net/mlx4_en: Use the correct netif lock on ndo_set_rx_mode The device multicast list is protected by netif_addr_lock_bh in the networking core, we should use this locking practice in mlx4_en too. Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Reviewed-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index bab8cec..805e242 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -767,9 +767,9 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) /* Update multicast list - we cache all addresses so they won't * change while HW is updated holding the command semaphor */ - netif_tx_lock_bh(dev); + netif_addr_lock_bh(dev); mlx4_en_cache_mclist(dev); - netif_tx_unlock_bh(dev); + netif_addr_unlock_bh(dev); list_for_each_entry(mclist, &priv->mc_list, list) { mcast_addr = mlx4_en_mac_to_u64(mclist->addr); mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, -- cgit v0.10.2 From f356fcbe12c1174713e83651b630330f8f0f8415 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 24 Jan 2013 01:54:17 +0000 Subject: net/mlx4_core: Return proper error code when __mlx4_add_one fails Returning 0 (success) when in fact we are aborting the load, leads to kernel panic when unloading the module. Fix that by returning the actual error code. Signed-off-by: Jack Morgenstein Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e1bafff..983fd3d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2169,7 +2169,8 @@ slave_start: dev->num_slaves = MLX4_MAX_NUM_SLAVES; else { dev->num_slaves = 0; - if (mlx4_multi_func_init(dev)) { + err = mlx4_multi_func_init(dev); + if (err) { mlx4_err(dev, "Failed to init slave mfunc" " interface, aborting.\n"); goto err_cmd; @@ -2193,7 +2194,8 @@ slave_start: /* In master functions, the communication channel must be initialized * after obtaining its address from fw */ if (mlx4_is_master(dev)) { - if (mlx4_multi_func_init(dev)) { + err = mlx4_multi_func_init(dev); + if (err) { mlx4_err(dev, "Failed to init master mfunc" "interface, aborting.\n"); goto err_close; @@ -2210,6 +2212,7 @@ slave_start: mlx4_enable_msi_x(dev); if ((mlx4_is_mfunc(dev)) && !(dev->flags & MLX4_FLAG_MSI_X)) { + err = -ENOSYS; mlx4_err(dev, "INTx is not supported in multi-function mode." " aborting.\n"); goto err_free_eq; -- cgit v0.10.2 From 7225922558f04f25a22683ce08454dae8dd4b9f4 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Thu, 24 Jan 2013 01:54:18 +0000 Subject: net/mlx4_en: Fix a race when closing TX queue There is a possible race where the TX completion handler can clean the entire TX queue between the decision that the queue is full and actually closing it. To avoid this situation, check again if the queue is really full, if not, reopen the transmit and continue with sending the packet. CC: Eric Dumazet Signed-off-by: Yevgeny Petrilin Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 16af338..3c5ffd2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -588,7 +588,21 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) netif_tx_stop_queue(ring->tx_queue); priv->port_stats.queue_stopped++; - return NETDEV_TX_BUSY; + /* If queue was emptied after the if, and before the + * stop_queue - need to wake the queue, or else it will remain + * stopped forever. + * Need a memory barrier to make sure ring->cons was not + * updated before queue was stopped. + */ + wmb(); + + if (unlikely(((int)(ring->prod - ring->cons)) <= + ring->size - HEADROOM - MAX_DESC_TXBBS)) { + netif_tx_wake_queue(ring->tx_queue); + priv->port_stats.wake_queue++; + } else { + return NETDEV_TX_BUSY; + } } /* Track current inflight packets for performance analysis */ -- cgit v0.10.2 From 78fb2de711ec28997bf38bcf3e48e108e907be77 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Thu, 24 Jan 2013 01:54:19 +0000 Subject: net/mlx4_en: Initialize RFS filters lock and list in init_netdev filters_lock might have been used while it was re-initialized. Moved filters_lock and filters_list initialization to init_netdev instead of alloc_resources which is called every time the device is configured. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 805e242..9c42812 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1454,9 +1454,6 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->rx_ring_num); if (!priv->dev->rx_cpu_rmap) goto err; - - INIT_LIST_HEAD(&priv->filters); - spin_lock_init(&priv->filters_lock); #endif return 0; @@ -1651,6 +1648,11 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, if (err) goto out; +#ifdef CONFIG_RFS_ACCEL + INIT_LIST_HEAD(&priv->filters); + spin_lock_init(&priv->filters_lock); +#endif + /* Allocate page for receive rings */ err = mlx4_alloc_hwq_res(mdev->dev, &priv->res, MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE); -- cgit v0.10.2 From cec771d646d6c9a6f123b50e132ab142342dcb97 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Jan 2013 21:09:50 +0000 Subject: decnet: use correct RCU API to deref sk_dst_cache field sock->sk_dst_cache is protected by RCU, therefore we should use __sk_dst_get() to deref it once we lock the sock. This fixes several sparse warnings. Cc: linux-decnet-user@lists.sourceforge.net Cc: Eric Dumazet Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/net/dn_route.h b/include/net/dn_route.h index 4f7d6a1..2e9d317 100644 --- a/include/net/dn_route.h +++ b/include/net/dn_route.h @@ -16,7 +16,7 @@ *******************************************************************************/ extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri); -extern int dn_route_output_sock(struct dst_entry **pprt, struct flowidn *, struct sock *sk, int flags); +extern int dn_route_output_sock(struct dst_entry __rcu **pprt, struct flowidn *, struct sock *sk, int flags); extern int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb); extern void dn_rt_cache_flush(int delay); diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 307c322..64d9843 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -909,6 +909,7 @@ static int __dn_connect(struct sock *sk, struct sockaddr_dn *addr, int addrlen, struct dn_scp *scp = DN_SK(sk); int err = -EISCONN; struct flowidn fld; + struct dst_entry *dst; if (sock->state == SS_CONNECTED) goto out; @@ -955,10 +956,11 @@ static int __dn_connect(struct sock *sk, struct sockaddr_dn *addr, int addrlen, fld.flowidn_proto = DNPROTO_NSP; if (dn_route_output_sock(&sk->sk_dst_cache, &fld, sk, flags) < 0) goto out; - sk->sk_route_caps = sk->sk_dst_cache->dev->features; + dst = __sk_dst_get(sk); + sk->sk_route_caps = dst->dev->features; sock->state = SS_CONNECTING; scp->state = DN_CI; - scp->segsize_loc = dst_metric_advmss(sk->sk_dst_cache); + scp->segsize_loc = dst_metric_advmss(dst); dn_nsp_send_conninit(sk, NSP_CI); err = -EINPROGRESS; diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c index 8a96047c..1aaa51e 100644 --- a/net/decnet/dn_nsp_out.c +++ b/net/decnet/dn_nsp_out.c @@ -598,7 +598,7 @@ void dn_nsp_send_disc(struct sock *sk, unsigned char msgflg, if (reason == 0) reason = le16_to_cpu(scp->discdata_out.opt_status); - dn_nsp_do_disc(sk, msgflg, reason, gfp, sk->sk_dst_cache, ddl, + dn_nsp_do_disc(sk, msgflg, reason, gfp, __sk_dst_get(sk), ddl, scp->discdata_out.opt_data, scp->addrrem, scp->addrloc); } diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index b57419c..1550028 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -1282,7 +1282,7 @@ static int dn_route_output_key(struct dst_entry **pprt, struct flowidn *flp, int return err; } -int dn_route_output_sock(struct dst_entry **pprt, struct flowidn *fl, struct sock *sk, int flags) +int dn_route_output_sock(struct dst_entry __rcu **pprt, struct flowidn *fl, struct sock *sk, int flags) { int err; -- cgit v0.10.2 From 0e36cbb344575e481167e090f0926701f83207d6 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Jan 2013 21:09:51 +0000 Subject: net: add RCU annotation to sk_dst_cache field sock->sk_dst_cache is protected by RCU. Reported-by: Fengguang Wu Cc: Eric Dumazet Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/net/sock.h b/include/net/sock.h index 581dc6b..a340ab4 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -340,7 +340,7 @@ struct sock { #endif unsigned long sk_flags; struct dst_entry *sk_rx_dst; - struct dst_entry *sk_dst_cache; + struct dst_entry __rcu *sk_dst_cache; spinlock_t sk_dst_lock; atomic_t sk_wmem_alloc; atomic_t sk_omem_alloc; -- cgit v0.10.2 From cef401de7be8c4e155c6746bfccf721a4fa5fab9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 25 Jan 2013 20:34:37 +0000 Subject: net: fix possible wrong checksum generation Pravin Shelar mentioned that GSO could potentially generate wrong TX checksum if skb has fragments that are overwritten by the user between the checksum computation and transmit. He suggested to linearize skbs but this extra copy can be avoided for normal tcp skbs cooked by tcp_sendmsg(). This patch introduces a new SKB_GSO_SHARED_FRAG flag, set in skb_shinfo(skb)->gso_type if at least one frag can be modified by the user. Typical sources of such possible overwrites are {vm}splice(), sendfile(), and macvtap/tun/virtio_net drivers. Tested: $ netperf -H 7.7.8.84 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3959.52 $ netperf -H 7.7.8.84 -t TCP_SENDFILE TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3216.80 Performance of the SENDFILE is impacted by the extra allocation and copy, and because we use order-0 pages, while the TCP_STREAM uses bigger pages. Reported-by: Pravin Shelar Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0f0f9ce..b181dfb 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -543,6 +543,7 @@ static int zerocopy_sg_from_iovec(struct sk_buff *skb, const struct iovec *from, skb->data_len += len; skb->len += len; skb->truesize += truesize; + skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; atomic_add(truesize, &skb->sk->sk_wmem_alloc); while (len) { int off = base & ~PAGE_MASK; @@ -598,7 +599,7 @@ static int macvtap_skb_from_vnet_hdr(struct sk_buff *skb, if (vnet_hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { skb_shinfo(skb)->gso_size = vnet_hdr->gso_size; - skb_shinfo(skb)->gso_type = gso_type; + skb_shinfo(skb)->gso_type |= gso_type; /* Header must be checked, and gso_segs computed. */ skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index c81680d..293ce8d 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1005,6 +1005,7 @@ static int zerocopy_sg_from_iovec(struct sk_buff *skb, const struct iovec *from, skb->data_len += len; skb->len += len; skb->truesize += truesize; + skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; atomic_add(truesize, &skb->sk->sk_wmem_alloc); while (len) { int off = base & ~PAGE_MASK; @@ -1150,16 +1151,18 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) { + unsigned short gso_type = 0; + pr_debug("GSO!\n"); switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { case VIRTIO_NET_HDR_GSO_TCPV4: - skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + gso_type = SKB_GSO_TCPV4; break; case VIRTIO_NET_HDR_GSO_TCPV6: - skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + gso_type = SKB_GSO_TCPV6; break; case VIRTIO_NET_HDR_GSO_UDP: - skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + gso_type = SKB_GSO_UDP; break; default: tun->dev->stats.rx_frame_errors++; @@ -1168,9 +1171,10 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (gso.gso_type & VIRTIO_NET_HDR_GSO_ECN) - skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN; + gso_type |= SKB_GSO_TCP_ECN; skb_shinfo(skb)->gso_size = gso.gso_size; + skb_shinfo(skb)->gso_type |= gso_type; if (skb_shinfo(skb)->gso_size == 0) { tun->dev->stats.rx_frame_errors++; kfree_skb(skb); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 701408a..58914c8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -220,6 +220,7 @@ static void set_skb_frag(struct sk_buff *skb, struct page *page, skb->len += size; skb->truesize += PAGE_SIZE; skb_shinfo(skb)->nr_frags++; + skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; *len -= size; } @@ -379,16 +380,18 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len) ntohs(skb->protocol), skb->len, skb->pkt_type); if (hdr->hdr.gso_type != VIRTIO_NET_HDR_GSO_NONE) { + unsigned short gso_type = 0; + pr_debug("GSO!\n"); switch (hdr->hdr.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { case VIRTIO_NET_HDR_GSO_TCPV4: - skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + gso_type = SKB_GSO_TCPV4; break; case VIRTIO_NET_HDR_GSO_UDP: - skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + gso_type = SKB_GSO_UDP; break; case VIRTIO_NET_HDR_GSO_TCPV6: - skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + gso_type = SKB_GSO_TCPV6; break; default: net_warn_ratelimited("%s: bad gso type %u.\n", @@ -397,7 +400,7 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len) } if (hdr->hdr.gso_type & VIRTIO_NET_HDR_GSO_ECN) - skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN; + gso_type |= SKB_GSO_TCP_ECN; skb_shinfo(skb)->gso_size = hdr->hdr.gso_size; if (skb_shinfo(skb)->gso_size == 0) { @@ -405,6 +408,7 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len) goto frame_err; } + skb_shinfo(skb)->gso_type |= gso_type; /* Header must be checked, and gso_segs computed. */ skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; skb_shinfo(skb)->gso_segs = 0; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 8b2256e..0259b71 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -307,6 +307,13 @@ enum { SKB_GSO_TCPV6 = 1 << 4, SKB_GSO_FCOE = 1 << 5, + + /* This indicates at least one fragment might be overwritten + * (as in vmsplice(), sendfile() ...) + * If we need to compute a TX checksum, we'll need to copy + * all frags to avoid possible bad checksum + */ + SKB_GSO_SHARED_FRAG = 1 << 6, }; #if BITS_PER_LONG > 32 @@ -2201,6 +2208,18 @@ static inline int skb_linearize(struct sk_buff *skb) } /** + * skb_has_shared_frag - can any frag be overwritten + * @skb: buffer to test + * + * Return true if the skb has at least one frag that might be modified + * by an external entity (as in vmsplice()/sendfile()) + */ +static inline bool skb_has_shared_frag(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_type & SKB_GSO_SHARED_FRAG; +} + +/** * skb_linearize_cow - make sure skb is linear and writable * @skb: buffer to process * diff --git a/net/core/dev.c b/net/core/dev.c index c69cd87..a83375d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2271,6 +2271,15 @@ int skb_checksum_help(struct sk_buff *skb) return -EINVAL; } + /* Before computing a checksum, we should make sure no frag could + * be modified by an external entity : checksum could be wrong. + */ + if (skb_has_shared_frag(skb)) { + ret = __skb_linearize(skb); + if (ret) + goto out; + } + offset = skb_checksum_start_offset(skb); BUG_ON(offset >= skb_headlen(skb)); csum = skb_checksum(skb, offset, skb->len - offset, 0); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 2568c44..bddc1dd 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2340,6 +2340,8 @@ void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len) { int pos = skb_headlen(skb); + skb_shinfo(skb1)->gso_type = skb_shinfo(skb)->gso_type; + if (len < pos) /* Split line is inside header. */ skb_split_inside_header(skb, skb1, len, pos); else /* Second chunk has no header, nothing to copy. */ @@ -2845,6 +2847,8 @@ struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features) skb_copy_from_linear_data_offset(skb, offset, skb_put(nskb, hsize), hsize); + skb_shinfo(nskb)->gso_type = skb_shinfo(skb)->gso_type; + while (pos < offset + len && i < nfrags) { *frag = skb_shinfo(skb)->frags[i]; __skb_frag_ref(frag); diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 4b70539..49ddca3 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1306,6 +1306,7 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, SKB_GSO_UDP | SKB_GSO_DODGY | SKB_GSO_TCP_ECN | + SKB_GSO_SHARED_FRAG | 0))) goto out; diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 303012a..af6be70 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -738,7 +738,7 @@ drop: static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) { struct ip_tunnel *tunnel = netdev_priv(dev); - const struct iphdr *old_iph = ip_hdr(skb); + const struct iphdr *old_iph; const struct iphdr *tiph; struct flowi4 fl4; u8 tos; @@ -756,6 +756,8 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev skb_checksum_help(skb)) goto tx_error; + old_iph = ip_hdr(skb); + if (dev->type == ARPHRD_ETHER) IPCB(skb)->flags = 0; diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 191fc24..8f024d4 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -472,7 +472,7 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) __be16 df = tiph->frag_off; struct rtable *rt; /* Route to the other host */ struct net_device *tdev; /* Device to other host */ - const struct iphdr *old_iph = ip_hdr(skb); + const struct iphdr *old_iph; struct iphdr *iph; /* Our new IP header */ unsigned int max_headroom; /* The extra header space needed */ __be32 dst = tiph->daddr; @@ -486,6 +486,8 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) skb_checksum_help(skb)) goto tx_error; + old_iph = ip_hdr(skb); + if (tos & 1) tos = old_iph->tos; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 5227194..3ec1f69 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -896,6 +896,8 @@ new_segment: skb_fill_page_desc(skb, i, page, offset, copy); } + skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; + skb->len += copy; skb->data_len += copy; skb->truesize += copy; @@ -3032,6 +3034,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, SKB_GSO_DODGY | SKB_GSO_TCP_ECN | SKB_GSO_TCPV6 | + SKB_GSO_SHARED_FRAG | 0) || !(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))) goto out; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 0905997..492c7cf 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1240,13 +1240,13 @@ static bool tcp_shifted_skb(struct sock *sk, struct sk_buff *skb, */ if (!skb_shinfo(prev)->gso_size) { skb_shinfo(prev)->gso_size = mss; - skb_shinfo(prev)->gso_type = sk->sk_gso_type; + skb_shinfo(prev)->gso_type |= sk->sk_gso_type; } /* CHECKME: To clear or not to clear? Mimics normal skb currently */ if (skb_shinfo(skb)->gso_segs <= 1) { skb_shinfo(skb)->gso_size = 0; - skb_shinfo(skb)->gso_type = 0; + skb_shinfo(skb)->gso_type &= SKB_GSO_SHARED_FRAG; } /* Difference in this won't matter, both ACKed by the same cumul. ACK */ diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 667a6ad..367e2ec 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1133,6 +1133,7 @@ static void tcp_queue_skb(struct sock *sk, struct sk_buff *skb) static void tcp_set_skb_tso_segs(const struct sock *sk, struct sk_buff *skb, unsigned int mss_now) { + skb_shinfo(skb)->gso_type &= SKB_GSO_SHARED_FRAG; if (skb->len <= mss_now || !sk_can_gso(sk) || skb->ip_summed == CHECKSUM_NONE) { /* Avoid the costly divide in the normal @@ -1140,11 +1141,10 @@ static void tcp_set_skb_tso_segs(const struct sock *sk, struct sk_buff *skb, */ skb_shinfo(skb)->gso_segs = 1; skb_shinfo(skb)->gso_size = 0; - skb_shinfo(skb)->gso_type = 0; } else { skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss_now); skb_shinfo(skb)->gso_size = mss_now; - skb_shinfo(skb)->gso_type = sk->sk_gso_type; + skb_shinfo(skb)->gso_type |= sk->sk_gso_type; } } diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index f26f0da..d141fc3 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -100,6 +100,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, SKB_GSO_DODGY | SKB_GSO_TCP_ECN | SKB_GSO_TCPV6 | + SKB_GSO_SHARED_FRAG | 0))) goto out; -- cgit v0.10.2 From 7de89f058ec2c58ef16582e4efadeb33d711c9e1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 08:06:03 +0000 Subject: e1000e: cleanup: remove e1000_set_d0_lplu_state() Replace the function e1000_set_d0_lplu_state() with the contents of it coded in place of the single call to the function. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 44fb432..73d7813 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -30,7 +30,6 @@ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); static s32 e1000_wait_autoneg(struct e1000_hw *hw); static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read, bool page_set); @@ -894,10 +893,12 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) msleep(100); /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, false); - if (ret_val) { - e_dbg("Error Disabling LPLU D0\n"); - return ret_val; + if (hw->phy.ops.set_d0_lplu_state) { + ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); + if (ret_val) { + e_dbg("Error Disabling LPLU D0\n"); + return ret_val; + } } /* Configure mdi-mdix settings */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data); @@ -2820,28 +2821,6 @@ s32 e1000e_commit_phy(struct e1000_hw *hw) } /** - * e1000_set_d0_lplu_state - Sets low power link up state for D0 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D0 - * and SmartSpeed is disabled when active is true, else clear lplu for D0 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. This is a function pointer entry point called by drivers. - **/ -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) -{ - if (hw->phy.ops.set_d0_lplu_state) - return hw->phy.ops.set_d0_lplu_state(hw, active); - - return 0; -} - -/** * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read -- cgit v0.10.2 From c2c6629ba3f57d19b1385554b7fadb671bc7ab30 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 08:06:08 +0000 Subject: e1000e: cleanup: remove e1000_force_speed_duplex() Remove the function e1000_force_speed_duplex() and replace the single call to it with the same function pointer that it would call. The function pointer is always set so there is no risk of a NULL pointer dereference. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 73d7813..81fba6c 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -29,7 +29,6 @@ #include "e1000.h" static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); -static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); static s32 e1000_wait_autoneg(struct e1000_hw *hw); static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read, bool page_set); @@ -1196,7 +1195,7 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) * depending on user settings. */ e_dbg("Forcing Speed and Duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); + ret_val = hw->phy.ops.force_speed_duplex(hw); if (ret_val) { e_dbg("Error Forcing Speed and Duplex\n"); return ret_val; @@ -2284,21 +2283,6 @@ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) } /** - * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex - * @hw: pointer to the HW structure - * - * When the silicon family has not implemented a forced speed/duplex - * function for the PHY, simply return 0. - **/ -static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) -{ - if (hw->phy.ops.force_speed_duplex) - return hw->phy.ops.force_speed_duplex(hw); - - return 0; -} - -/** * e1000e_get_phy_type_from_id - Get PHY type from id * @phy_id: phy_id read from the phy * -- cgit v0.10.2 From fe90849f76de7cd584e8c6c38b076cd366415994 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 08:06:14 +0000 Subject: e1000e: cleanup: rename e1000_get_cfg_done() In keeping with the e1000e driver function naming convention, the subject function is renamed to indicate it is generic, i.e. it is applicable to more than just a single MAC family (e.g. 80003es2lan, 82571, ich8lan). Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 0f55d79..076938c 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1940,7 +1940,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = { .check_reset_block = e1000e_check_reset_block_generic, .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000e_get_cfg_done_generic, .get_cable_length = e1000e_get_cable_length_m88, .get_info = e1000e_get_phy_info_m88, .read_reg = e1000e_read_phy_reg_m88, @@ -1958,7 +1958,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = { .check_reset_block = e1000e_check_reset_block_generic, .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000e_get_cfg_done_generic, .get_cable_length = e1000e_get_cable_length_m88, .get_info = e1000e_get_phy_info_m88, .read_reg = e1000e_read_phy_reg_bm2, diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index e6b9483..115656e 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -654,7 +654,7 @@ extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); -extern s32 e1000e_get_cfg_done(struct e1000_hw *hw); +extern s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw); extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw); extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 87676b6..edd5996 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4378,7 +4378,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) u32 bank = 0; u32 status; - e1000e_get_cfg_done(hw); + e1000e_get_cfg_done_generic(hw); /* Wait for indication from h/w that it has completed basic config */ if (hw->mac.type >= e1000_ich10lan) { diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 81fba6c..37a85d4 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2169,13 +2169,13 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) } /** - * e1000e_get_cfg_done - Generic configuration done + * e1000e_get_cfg_done_generic - Generic configuration done * @hw: pointer to the HW structure * * Generic function to wait 10 milli-seconds for configuration to complete * and return success. **/ -s32 e1000e_get_cfg_done(struct e1000_hw *hw) +s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw) { mdelay(10); -- cgit v0.10.2 From 84c1befe341d71ed1b878afa28bb637a0b459161 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 08:06:19 +0000 Subject: e1000e: cleanup: remove e1000_get_phy_cfg_done() Remove the function e1000_get_phy_cfg_done() and replace the single call to it with the same function pointer that it would call. The function pointer is always set so there is no risk of a NULL pointer dereference. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 37a85d4..3cf627b 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -28,7 +28,6 @@ #include "e1000.h" -static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); static s32 e1000_wait_autoneg(struct e1000_hw *hw); static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read, bool page_set); @@ -2165,7 +2164,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) phy->ops.release(hw); - return e1000_get_phy_cfg_done(hw); + return phy->ops.get_cfg_done(hw); } /** @@ -2265,23 +2264,6 @@ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) return 0; } -/* Internal function pointers */ - -/** - * e1000_get_phy_cfg_done - Generic PHY configuration done - * @hw: pointer to the HW structure - * - * Return success if silicon family did not implement a family specific - * get_cfg_done function. - **/ -static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) -{ - if (hw->phy.ops.get_cfg_done) - return hw->phy.ops.get_cfg_done(hw); - - return 0; -} - /** * e1000e_get_phy_type_from_id - Get PHY type from id * @phy_id: phy_id read from the phy -- cgit v0.10.2 From dde3a5745cd27167653feb2e7e9fa0e3631e91ce Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 5 Jan 2013 08:06:24 +0000 Subject: e1000e: cleanup: remove e1000_get_cable_length() Remove the function e1000_get_cable_length() and replace the two calls to it with the same function pointer that it would call. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 115656e..896eacc 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -737,11 +737,6 @@ static inline s32 e1e_wphy_locked(struct e1000_hw *hw, u32 offset, u16 data) return hw->phy.ops.write_reg_locked(hw, offset, data); } -static inline s32 e1000_get_cable_length(struct e1000_hw *hw) -{ - return hw->phy.ops.get_cable_length(hw); -} - extern s32 e1000e_acquire_nvm(struct e1000_hw *hw); extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 3cf627b..c4bfbd6 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1960,7 +1960,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { - ret_val = e1000_get_cable_length(hw); + ret_val = hw->phy.ops.get_cable_length(hw); if (ret_val) return ret_val; @@ -2024,7 +2024,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - ret_val = e1000_get_cable_length(hw); + ret_val = phy->ops.get_cable_length(hw); if (ret_val) return ret_val; -- cgit v0.10.2 From 6b598e1eac68b07ebb831258e0667f5ba2834822 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 23 Jan 2013 06:50:05 +0000 Subject: e1000e: cleanup: remove e1000e_commit_phy() Remove the function e1000e_commit_phy() and replace the few calls to it with the same function pointer that it would call. The function pointer is almost always set for the devices that access these code paths so there is no risk of a NULL pointer dereference; for the few instances where the function pointer might not be set (i.e. can be called for the few devices which do not have this function pointer set), check for a valid function pointer. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index ae96fac..3f27546 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1010,7 +1010,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) return ret_val; /* SW Reset the PHY so all changes take effect */ - ret_val = e1000e_commit_phy(hw); + ret_val = hw->phy.ops.commit(hw); if (ret_val) { e_dbg("Error Resetting the PHY\n"); return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 896eacc..4ffb62b 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -579,8 +579,6 @@ extern const struct e1000_info e1000_es2_info; extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size); -extern s32 e1000e_commit_phy(struct e1000_hw *hw); - extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 6ab949d..58df18c 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1321,7 +1321,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) phy_reg |= 0x006; e1e_wphy(hw, PHY_REG(2, 21), phy_reg); /* Assert SW reset for above settings to take effect */ - e1000e_commit_phy(hw); + hw->phy.ops.commit(hw); mdelay(1); /* Force Full Duplex */ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); @@ -1542,7 +1542,8 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; e1e_wphy(hw, PHY_CONTROL, phy_reg); - e1000e_commit_phy(hw); + if (hw->phy.ops.commit) + hw->phy.ops.commit(hw); } break; } diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index c4bfbd6..cddfc6b 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -788,7 +788,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) if (ret_val) return ret_val; /* Commit the changes. */ - ret_val = e1000e_commit_phy(hw); + ret_val = phy->ops.commit(hw); if (ret_val) { e_dbg("Error committing the PHY changes\n"); return ret_val; @@ -844,10 +844,12 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) } /* Commit the changes. */ - ret_val = e1000e_commit_phy(hw); - if (ret_val) { - e_dbg("Error committing the PHY changes\n"); - return ret_val; + if (phy->ops.commit) { + ret_val = phy->ops.commit(hw); + if (ret_val) { + e_dbg("Error committing the PHY changes\n"); + return ret_val; + } } if (phy->type == e1000_phy_82578) { @@ -1324,9 +1326,11 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; /* Reset the phy to commit changes. */ - ret_val = e1000e_commit_phy(hw); - if (ret_val) - return ret_val; + if (hw->phy.ops.commit) { + ret_val = hw->phy.ops.commit(hw); + if (ret_val) + return ret_val; + } if (phy->autoneg_wait_to_complete) { e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); @@ -2772,21 +2776,6 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw) } /** - * e1000e_commit_phy - Soft PHY reset - * @hw: pointer to the HW structure - * - * Performs a soft PHY reset on those that apply. This is a function pointer - * entry point called by drivers. - **/ -s32 e1000e_commit_phy(struct e1000_hw *hw) -{ - if (hw->phy.ops.commit) - return hw->phy.ops.commit(hw); - - return 0; -} - -/** * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read -- cgit v0.10.2 From c3d2dbf403367eb5c17f044aa74b772508d745c1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 9 Jan 2013 01:20:46 +0000 Subject: e1000e: correct maximum frame size on 82579 The largest jumbo frame supported by the 82579 hardware is 9018. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index edd5996..58547b8 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4620,7 +4620,7 @@ const struct e1000_info e1000_pch2_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, -- cgit v0.10.2 From 3e35d9918cbbc224f88da4dd19cd90b2cd4f765e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:25:22 +0000 Subject: e1000e: adjust PM QoS request It has been found that devices other than 82579 (a.k.a. e1000_pch2lan) suffer from dropped transactions on platforms with deep C-states when jumbo frames are enabled. For example, LOMs on ICH9- and ICH10-based platforms which recently had early-receive de-featured (for stability reasons) suffer from this. To resolve this for all devices, when jumbo frames are enabled set the PM QoS DMA latency request based on the size of the receive packet buffer less one full frame. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 3b99719..c458767 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -393,6 +393,8 @@ #define E1000_PBA_8K 0x0008 /* 8KB */ #define E1000_PBA_16K 0x0010 /* 16KB */ +#define E1000_PBA_RXA_MASK 0xFFFF + #define E1000_PBS_16K E1000_PBA_16K /* Uncorrectable/correctable ECC Error counts and enable bits */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e386e95..46a38a4 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3242,18 +3242,23 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) rxcsum &= ~E1000_RXCSUM_TUOFL; ew32(RXCSUM, rxcsum); - if (adapter->hw.mac.type == e1000_pch2lan) { - /* With jumbo frames, excessive C-state transition - * latencies result in dropped transactions. - */ - if (adapter->netdev->mtu > ETH_DATA_LEN) { + /* With jumbo frames, excessive C-state transition latencies result + * in dropped transactions. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + u32 lat = + ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 - + adapter->max_frame_size) * 8 / 1000; + + if (adapter->flags & FLAG_IS_ICH) { u32 rxdctl = er32(RXDCTL(0)); ew32(RXDCTL(0), rxdctl | 0x3); - pm_qos_update_request(&adapter->netdev->pm_qos_req, 55); - } else { - pm_qos_update_request(&adapter->netdev->pm_qos_req, - PM_QOS_DEFAULT_VALUE); } + + pm_qos_update_request(&adapter->netdev->pm_qos_req, lat); + } else { + pm_qos_update_request(&adapter->netdev->pm_qos_req, + PM_QOS_DEFAULT_VALUE); } /* Enable Receives */ @@ -4281,10 +4286,8 @@ static int e1000_open(struct net_device *netdev) e1000_update_mng_vlan(adapter); /* DMA latency requirement to workaround jumbo issue */ - if (adapter->hw.mac.type == e1000_pch2lan) - pm_qos_add_request(&adapter->netdev->pm_qos_req, - PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); + pm_qos_add_request(&adapter->netdev->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt @@ -4392,8 +4395,7 @@ static int e1000_close(struct net_device *netdev) !test_bit(__E1000_TESTING, &adapter->state)) e1000e_release_hw_control(adapter); - if (adapter->hw.mac.type == e1000_pch2lan) - pm_qos_remove_request(&adapter->netdev->pm_qos_req); + pm_qos_remove_request(&adapter->netdev->pm_qos_req); pm_runtime_put_sync(&pdev->dev); -- cgit v0.10.2 From 41c7d9c96342989cd4a7efe27f768df4528294f7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:25:52 +0000 Subject: e1000e: cleanup: remove unused #define All references to E1000_ERT_2048 have been removed. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 4ffb62b..c7d5c5b 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -78,9 +78,6 @@ struct e1000_info; #define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */ #define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */ -/* Early Receive defines */ -#define E1000_ERT_2048 0x100 - #define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */ /* How many Tx Descriptors do we need to call netif_wake_queue ? */ -- cgit v0.10.2 From a9bb6290392fd9edb7293bb335d0fff1d0b5b376 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:26:22 +0000 Subject: e1000e: cleanup hw.h Remove unnecessary #include, forward prototype of struct e1000_adapter and an empty comment; fix a comment which mentions "static data for the MAC" which is not applicable to the following struct; and cleanup some whitespace issues. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index a10de4d..f32b19a 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -29,12 +29,9 @@ #ifndef _E1000_HW_H_ #define _E1000_HW_H_ -#include +#include "defines.h" struct e1000_hw; -struct e1000_adapter; - -#include "defines.h" enum e1e_registers { E1000_CTRL = 0x00000, /* Device Control - RW */ @@ -391,13 +388,11 @@ enum e1e_registers { #define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82574L 0x10D3 #define E1000_DEV_ID_82574LA 0x10F6 -#define E1000_DEV_ID_82583V 0x150C - +#define E1000_DEV_ID_82583V 0x150C #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 #define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA #define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB - #define E1000_DEV_ID_ICH8_82567V_3 0x1501 #define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A @@ -432,12 +427,12 @@ enum e1e_registers { #define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A #define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 -#define E1000_REVISION_4 4 +#define E1000_REVISION_4 4 -#define E1000_FUNC_1 1 +#define E1000_FUNC_1 1 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 enum e1000_mac_type { e1000_82571, @@ -664,7 +659,7 @@ struct e1000_data_desc { struct { u8 status; /* Descriptor status */ u8 popts; /* Packet Options */ - __le16 special; /* */ + __le16 special; } fields; } upper; }; @@ -760,7 +755,7 @@ struct e1000_host_command_header { u8 checksum; }; -#define E1000_HI_MAX_DATA_LENGTH 252 +#define E1000_HI_MAX_DATA_LENGTH 252 struct e1000_host_command_info { struct e1000_host_command_header command_header; u8 command_data[E1000_HI_MAX_DATA_LENGTH]; @@ -775,13 +770,13 @@ struct e1000_host_mng_command_header { u16 command_length; }; -#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 struct e1000_host_mng_command_info { struct e1000_host_mng_command_header command_header; u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; }; -/* Function pointers and static data for the MAC. */ +/* Function pointers for the MAC. */ struct e1000_mac_operations { s32 (*id_led_init)(struct e1000_hw *); s32 (*blink_led)(struct e1000_hw *); -- cgit v0.10.2 From 39149d4da6d50de92f9e7f70c743a8b8c20eeac1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:26:53 +0000 Subject: e1000e: cleanup: remove comments which are no longer applicable Code was removed but the applicable comments were not. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index c458767..d29b2fd 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -261,8 +261,6 @@ #define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -/* Constants used to interpret the masked PCI-X bus speed. */ - #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -330,8 +328,6 @@ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ #define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ -/* Transmit Arbitration Count */ - /* SerDes Control */ #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 @@ -800,9 +796,6 @@ #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 -/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold) - * 0=Normal 10BASE-T Rx Threshold - */ #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ /* M88E1000 PHY Specific Status Register */ -- cgit v0.10.2 From aa19c2957b425f724efe93f2d5a5858b8aa613d7 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Thu, 24 Jan 2013 04:54:48 +0000 Subject: ixgbevf: Make sure link status and speed are fetched A recent change makes it necessary to set get_link_status to ensure that the driver fetches the correct, refreshed value for link status and speed when it has changed in the physical function device. Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c index 8f20704..c9d0c12 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c +++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c @@ -99,6 +99,7 @@ static int ixgbevf_get_settings(struct net_device *netdev, ecmd->transceiver = XCVR_DUMMY1; ecmd->port = -1; + hw->mac.get_link_status = 1; hw->mac.ops.check_link(hw, &link_speed, &link_up, false); if (link_up) { -- cgit v0.10.2 From cdfa1fe5c0d4f2815acfe8cd7730a0b3d8d0a3e9 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 23 Jan 2013 22:52:27 +0800 Subject: af_key: remove a duplicated skb_orphan() skb_set_owner_r() will call skb_orphan(), I don't see any reason to call it twice. Cc: Steffen Klassert Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: Steffen Klassert diff --git a/net/key/af_key.c b/net/key/af_key.c index 5b426a6..6a6e684 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -203,7 +203,6 @@ static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2, } if (*skb2 != NULL) { if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf) { - skb_orphan(*skb2); skb_set_owner_r(*skb2, sk); skb_queue_tail(&sk->sk_receive_queue, *skb2); sk->sk_data_ready(sk, (*skb2)->len); -- cgit v0.10.2 From 5ac6f91d39e0884813dc010e14552143cd1d0d8b Mon Sep 17 00:00:00 2001 From: Mitch A Williams Date: Fri, 18 Jan 2013 08:57:20 +0000 Subject: igb: Don't give VFs random MAC addresses If the user has not assigned a MAC address to a VM, then don't give it a random one. Instead, just give it zeros and let it figure out what to do with them. Signed-off-by: Mitch Williams CC: Andy Gospodarek CC: Stefan Assmann Tested-by: Aaron Brown Tested-by: Stefan Assmann Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index b81a953..a59e630 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -5197,7 +5197,7 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf) { unsigned char mac_addr[ETH_ALEN]; - eth_random_addr(mac_addr); + eth_zero_addr(mac_addr); igb_set_vf_mac(adapter, vf, mac_addr); return 0; @@ -5550,9 +5550,9 @@ static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) { unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - /* generate a new mac address as we were hotplug removed/added */ + /* clear mac address as we were hotplug removed/added */ if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC)) - eth_random_addr(vf_mac); + eth_zero_addr(vf_mac); /* process remaining reset events */ igb_vf_reset(adapter, vf); -- cgit v0.10.2 From 8d56b6d507e0c4f6e24680fd202cbaad445935c5 Mon Sep 17 00:00:00 2001 From: Mitch A Williams Date: Fri, 18 Jan 2013 08:57:20 +0000 Subject: igbvf: be sane about random MAC addresses Tighten up some of the code surrounding MAC addresses. Since the PF is now giving all zeros instead of a random address, check for this case and generate a random address. This ensures that we always know when we have a random address and udev won't get upset about it. Additionally, tighten up some of the log messages and clean up the formatting. Signed-off-by: Mitch Williams CC: Andy Gospodarek CC: Stefan Assmann Tested-by: Aaron Brown Tested-by: Stefan Assmann Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 8f66d45..8224889 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2735,26 +2735,22 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = hw->mac.ops.reset_hw(hw); if (err) { dev_info(&pdev->dev, - "PF still in reset state, assigning new address." - " Is the PF interface up?\n"); - eth_hw_addr_random(netdev); - memcpy(adapter->hw.mac.addr, netdev->dev_addr, - netdev->addr_len); + "PF still in reset state. Is the PF interface up?\n"); } else { err = hw->mac.ops.read_mac_addr(hw); - if (err) { - dev_err(&pdev->dev, "Error reading MAC address\n"); - goto err_hw_init; - } + if (err) + dev_info(&pdev->dev, "Error reading MAC address.\n"); + else if (is_zero_ether_addr(adapter->hw.mac.addr)) + dev_info(&pdev->dev, "MAC address not assigned by administrator.\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, - netdev->addr_len); + netdev->addr_len); } if (!is_valid_ether_addr(netdev->dev_addr)) { - dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", - netdev->dev_addr); - err = -EIO; - goto err_hw_init; + dev_info(&pdev->dev, "Assigning random MAC address.\n"); + eth_hw_addr_random(netdev); + memcpy(adapter->hw.mac.addr, netdev->dev_addr, + netdev->addr_len); } setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, -- cgit v0.10.2 From 3b4797bce0050570e84bedd10e1b14e9320a3551 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Sat, 26 Jan 2013 17:00:02 -0800 Subject: mac80211: fix mesh_sta_info_get() reshuffle damage Before "mac80211: clean up mesh sta allocation warning" was applied, mesh_sta_info_get() was reshuffled to please sparse. As a result we neglect to initialize newly created STAs. Fix this. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 4e1d406..81e6126 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -408,6 +408,8 @@ mesh_sta_info_get(struct ieee80211_sub_if_data *sdata, return NULL; } + mesh_sta_info_init(sdata, sta, elems, true); + if (sta_info_insert_rcu(sta)) return NULL; } -- cgit v0.10.2 From a7966d908ae8472e8183496916b7baec5f65b3a6 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 24 Jan 2013 11:41:39 +0100 Subject: batman-adv: fix local translation table output The last-seen field has to be printed for all the local entries but the one marked with the no-purge flag Introduced by 15727323d9f8864b2d41930940acc38de987045a ("batman-adv: don't print the last_seen time for bat0 TT local entry") Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index fb15b4c..d44672f 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -517,8 +517,8 @@ int batadv_tt_local_seq_print_text(struct seq_file *seq, void *offset) BATADV_TT_CLIENT_PENDING ? 'X' : '.'), (tt_common_entry->flags & BATADV_TT_CLIENT_WIFI ? 'W' : '.'), - no_purge ? last_seen_secs : 0, - no_purge ? last_seen_msecs : 0); + no_purge ? 0 : last_seen_secs, + no_purge ? 0 : last_seen_msecs); } rcu_read_unlock(); } -- cgit v0.10.2 From 2bf3440d7b8755f2627232e6a4c37efbbe053685 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Mon, 28 Jan 2013 08:33:33 +0000 Subject: can: rework skb reserved data handling Added accessor and skb_reserve helpers for struct can_skb_priv. Removed pointless skb_headroom() check. Signed-off-by: Oliver Hartkopp CC: Marc Kleine-Budde Signed-off-by: David S. Miller diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 59ada08..f9cba41 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -512,8 +512,8 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf) skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; - skb_reserve(skb, sizeof(struct can_skb_priv)); - ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + can_skb_reserve(skb); + can_skb_prv(skb)->ifindex = dev->ifindex; *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); memset(*cf, 0, sizeof(struct can_frame)); diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index e79a8d1..06b7e09 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -195,8 +195,8 @@ static void slc_bump(struct slcan *sl) skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; - skb_reserve(skb, sizeof(struct can_skb_priv)); - ((struct can_skb_priv *)(skb->head))->ifindex = sl->dev->ifindex; + can_skb_reserve(skb); + can_skb_prv(skb)->ifindex = sl->dev->ifindex; memcpy(skb_put(skb, sizeof(struct can_frame)), &cf, sizeof(struct can_frame)); diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index 4b0f24d..2f0543f 100644 --- a/include/linux/can/skb.h +++ b/include/linux/can/skb.h @@ -32,4 +32,14 @@ struct can_skb_priv { struct can_frame cf[0]; }; +static inline struct can_skb_priv *can_skb_prv(struct sk_buff *skb) +{ + return (struct can_skb_priv *)(skb->head); +} + +static inline void can_skb_reserve(struct sk_buff *skb) +{ + skb_reserve(skb, sizeof(struct can_skb_priv)); +} + #endif /* CAN_SKB_H */ diff --git a/net/can/bcm.c b/net/can/bcm.c index ccc27b9..28e12d1 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -261,8 +261,8 @@ static void bcm_can_tx(struct bcm_op *op) if (!skb) goto out; - skb_reserve(skb, sizeof(struct can_skb_priv)); - ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + can_skb_reserve(skb); + can_skb_prv(skb)->ifindex = dev->ifindex; memcpy(skb_put(skb, CFSIZ), cf, CFSIZ); @@ -1207,7 +1207,7 @@ static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) if (!skb) return -ENOMEM; - skb_reserve(skb, sizeof(struct can_skb_priv)); + can_skb_reserve(skb); err = memcpy_fromiovec(skb_put(skb, CFSIZ), msg->msg_iov, CFSIZ); if (err < 0) { @@ -1221,7 +1221,7 @@ static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) return -ENODEV; } - ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + can_skb_prv(skb)->ifindex = dev->ifindex; skb->dev = dev; skb->sk = sk; err = can_send(skb, 1); /* send with loopback */ diff --git a/net/can/gw.c b/net/can/gw.c index acdd465..c185fcd 100644 --- a/net/can/gw.c +++ b/net/can/gw.c @@ -381,9 +381,7 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data) /* is sending the skb back to the incoming interface not allowed? */ if (!(gwj->flags & CGW_FLAGS_CAN_IIF_TX_OK) && - skb_headroom(skb) == sizeof(struct can_skb_priv) && - (((struct can_skb_priv *)(skb->head))->ifindex == - gwj->dst.dev->ifindex)) + can_skb_prv(skb)->ifindex == gwj->dst.dev->ifindex) return; /* diff --git a/net/can/raw.c b/net/can/raw.c index 5d860e8..c1764e4 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -705,8 +705,8 @@ static int raw_sendmsg(struct kiocb *iocb, struct socket *sock, if (!skb) goto put_dev; - skb_reserve(skb, sizeof(struct can_skb_priv)); - ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; + can_skb_reserve(skb); + can_skb_prv(skb)->ifindex = dev->ifindex; err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size); if (err < 0) -- cgit v0.10.2 From 5fbee843c32e5de2d8af68ba0bdd113bb0af9d86 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Jan 2013 21:29:39 +0000 Subject: netpoll: add RCU annotation to npinfo field dev->npinfo is protected by RCU. This fixes the following sparse warnings: net/core/netpoll.c:177:48: error: incompatible types in comparison expression (different address spaces) net/core/netpoll.c:200:35: error: incompatible types in comparison expression (different address spaces) net/core/netpoll.c:221:35: error: incompatible types in comparison expression (different address spaces) net/core/netpoll.c:327:18: error: incompatible types in comparison expression (different address spaces) Cc: Eric Dumazet Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 549f5ad..85b0949 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1272,7 +1272,7 @@ struct net_device { void (*destructor)(struct net_device *dev); #ifdef CONFIG_NETPOLL - struct netpoll_info *npinfo; + struct netpoll_info __rcu *npinfo; #endif #ifdef CONFIG_NET_NS -- cgit v0.10.2 From faeed828f9607923e9dc22182e819908e95c8852 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Sun, 27 Jan 2013 15:55:20 +0000 Subject: netpoll: use ipv6_addr_equal() to compare ipv6 addr ipv6_addr_equal() is faster. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index e2f79a1..a6f39b6 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -635,7 +635,7 @@ static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo spin_lock_irqsave(&npinfo->rx_lock, flags); list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { - if (memcmp(daddr, &np->local_ip, sizeof(*daddr))) + if (!ipv6_addr_equal(daddr, &np->local_ip.in6)) continue; hlen = LL_RESERVED_SPACE(np->dev); @@ -828,9 +828,9 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) if (udp6_csum_init(skb, uh, IPPROTO_UDP)) goto out; list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) { - if (memcmp(&np->local_ip.in6, &ip6h->daddr, sizeof(struct in6_addr)) != 0) + if (!ipv6_addr_equal(&np->local_ip.in6, &ip6h->daddr)) continue; - if (memcmp(&np->remote_ip.in6, &ip6h->saddr, sizeof(struct in6_addr)) != 0) + if (!ipv6_addr_equal(&np->remote_ip.in6, &ip6h->saddr)) continue; if (np->local_port && np->local_port != ntohs(uh->dest)) continue; -- cgit v0.10.2 From 556e6256c813063b95a9f4e55109f77c1a7d3fdd Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Sun, 27 Jan 2013 15:55:21 +0000 Subject: netpoll: use the net namespace of current process instead of init_net This will allow us to setup netconsole in a different namespace rather than where init_net is. Cc: Eric W. Biederman Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index a6f39b6..331ccb9 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -1049,8 +1049,10 @@ int netpoll_setup(struct netpoll *np) int err; rtnl_lock(); - if (np->dev_name) - ndev = __dev_get_by_name(&init_net, np->dev_name); + if (np->dev_name) { + struct net *net = current->nsproxy->net_ns; + ndev = __dev_get_by_name(net, np->dev_name); + } if (!ndev) { np_err(np, "%s doesn't exist, aborting\n", np->dev_name); err = -ENODEV; -- cgit v0.10.2 From ef3d90491a15f0d5cf1ec39a38a45dac6968fb2a Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 23 Jan 2013 00:30:03 +0000 Subject: net: phy: realtek: add rtl8211e driver This patch adds the minimal driver to manage the Realtek RTL8211E 10/100/1000 Transceivers. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 72f9347..8e7af83 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -23,6 +23,8 @@ #define RTL821x_INER_INIT 0x6400 #define RTL821x_INSR 0x13 +#define RTL8211E_INER_LINK_STAT 0x10 + MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); @@ -36,7 +38,7 @@ static int rtl821x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } -static int rtl821x_config_intr(struct phy_device *phydev) +static int rtl8211b_config_intr(struct phy_device *phydev) { int err; @@ -49,28 +51,63 @@ static int rtl821x_config_intr(struct phy_device *phydev) return err; } +static int rtl8211e_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, RTL821x_INER, + RTL8211E_INER_LINK_STAT); + else + err = phy_write(phydev, RTL821x_INER, 0); + + return err; +} + /* RTL8211B */ -static struct phy_driver rtl821x_driver = { +static struct phy_driver rtl8211b_driver = { .phy_id = 0x001cc912, - .name = "RTL821x Gigabit Ethernet", + .name = "RTL8211B Gigabit Ethernet", .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &rtl821x_ack_interrupt, - .config_intr = &rtl821x_config_intr, + .config_intr = &rtl8211b_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +/* RTL8211E */ +static struct phy_driver rtl8211e_driver = { + .phy_id = 0x001cc915, + .name = "RTL8211E Gigabit Ethernet", + .phy_id_mask = 0x001fffff, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &rtl821x_ack_interrupt, + .config_intr = &rtl8211e_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }; static int __init realtek_init(void) { - return phy_driver_register(&rtl821x_driver); + int ret; + + ret = phy_driver_register(&rtl8211b_driver); + if (ret < 0) + return -ENODEV; + return phy_driver_register(&rtl8211e_driver); } static void __exit realtek_exit(void) { - phy_driver_unregister(&rtl821x_driver); + phy_driver_unregister(&rtl8211b_driver); + phy_driver_unregister(&rtl8211e_driver); } module_init(realtek_init); @@ -78,6 +115,7 @@ module_exit(realtek_exit); static struct mdio_device_id __maybe_unused realtek_tbl[] = { { 0x001cc912, 0x001fffff }, + { 0x001cc915, 0x001fffff }, { } }; -- cgit v0.10.2 From 7ab59dc15e2f42a4321ed016bcd6044a4d8de6d1 Mon Sep 17 00:00:00 2001 From: "David J. Choi" Date: Wed, 23 Jan 2013 14:05:15 +0000 Subject: drivers/net/phy/micrel_phy: Add support for new PHYs Summary of changes: .Newly added phys -KSZ8081/KSZ8091, which has some phy ids. -KSZ8061 -KSZ9031, which is Gigabit phy. -KSZ886X, which has a switch function. -KSZ8031, which has a same phy ids with KSZ8021. Signed-off-by: David J. Choi Signed-off-by: David S. Miller diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index b983596..2993444 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -5,15 +5,20 @@ * * Author: David J. Choi * - * Copyright (c) 2010 Micrel, Inc. + * Copyright (c) 2010-2013 Micrel, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Support : ksz9021 1000/100/10 phy from Micrel - * ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy + * Support : Micrel Phys: + * Giga phys: ksz9021, ksz9031 + * 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041 + * ksz8021, ksz8031, ksz8051, + * ksz8081, ksz8091, + * ksz8061, + * Switch : ksz8873, ksz886x */ #include @@ -176,7 +181,7 @@ static struct phy_driver ksphy_driver[] = { }, { .phy_id = PHY_ID_KSZ8021, .phy_id_mask = 0x00ffffff, - .name = "Micrel KSZ8021", + .name = "Micrel KSZ8021 or KSZ8031", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -225,6 +230,30 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { + .phy_id = PHY_ID_KSZ8081, + .name = "Micrel KSZ8081 or KSZ8091", + .phy_id_mask = 0x00fffff0, + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8061, + .name = "Micrel KSZ8061", + .phy_id_mask = 0x00fffff0, + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { .phy_id = PHY_ID_KSZ9021, .phy_id_mask = 0x000ffffe, .name = "Micrel KSZ9021 Gigabit PHY", @@ -238,6 +267,19 @@ static struct phy_driver ksphy_driver[] = { .config_intr = ksz9021_config_intr, .driver = { .owner = THIS_MODULE, }, }, { + .phy_id = PHY_ID_KSZ9031, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KSZ9031 Gigabit PHY", + .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = ksz9021_config_intr, + .driver = { .owner = THIS_MODULE, }, +}, { .phy_id = PHY_ID_KSZ8873MLL, .phy_id_mask = 0x00fffff0, .name = "Micrel KSZ8873MLL Switch", @@ -247,6 +289,16 @@ static struct phy_driver ksphy_driver[] = { .config_aneg = ksz8873mll_config_aneg, .read_status = ksz8873mll_read_status, .driver = { .owner = THIS_MODULE, }, +}, { + .phy_id = PHY_ID_KSZ886X, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KSZ886X Switch", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, } }; static int __init ksphy_init(void) @@ -270,12 +322,16 @@ MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, + { PHY_ID_KSZ9031, 0x00fffff0 }, { PHY_ID_KSZ8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KSZ8021, 0x00ffffff }, { PHY_ID_KSZ8041, 0x00fffff0 }, { PHY_ID_KSZ8051, 0x00fffff0 }, + { PHY_ID_KSZ8061, 0x00fffff0 }, + { PHY_ID_KSZ8081, 0x00fffff0 }, { PHY_ID_KSZ8873MLL, 0x00fffff0 }, + { PHY_ID_KSZ886X, 0x00fffff0 }, { } }; diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index adfe8c0..9dbb41a 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -21,8 +21,15 @@ #define PHY_ID_KSZ8021 0x00221555 #define PHY_ID_KSZ8041 0x00221510 #define PHY_ID_KSZ8051 0x00221550 -/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */ +/* same id: ks8001 Rev. A/B, and ks8721 Rev 3. */ #define PHY_ID_KSZ8001 0x0022161A +/* same id: KS8081, KS8091 */ +#define PHY_ID_KSZ8081 0x00221560 +#define PHY_ID_KSZ8061 0x00221570 +#define PHY_ID_KSZ9031 0x00221620 + +#define PHY_ID_KSZ886X 0x00221430 +#define PHY_ID_KSZ8863 0x00221435 /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 -- cgit v0.10.2 From f7b5d1b9bd16e3ec71696abb204a8cfddd93aa62 Mon Sep 17 00:00:00 2001 From: Jamie Gloudon Date: Wed, 23 Jan 2013 18:05:04 +0000 Subject: via-rhine: add 64bit statistics. Switch to use ndo_get_stats64 to get 64bit statistics. Signed-off-by: Jamie Gloudon Tested-by: Jamie Gloudon Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index eab63e1..ec4a5e1 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -417,6 +417,12 @@ enum chip_cmd_bits { Cmd1NoTxPoll=0x08, Cmd1Reset=0x80, }; +struct rhine_stats { + u64 packets; + u64 bytes; + struct u64_stats_sync syncp; +}; + struct rhine_private { /* Bit mask for configured VLAN ids */ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -458,6 +464,8 @@ struct rhine_private { unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ unsigned int cur_tx, dirty_tx; unsigned int rx_buf_sz; /* Based on MTU+slack. */ + struct rhine_stats rx_stats; + struct rhine_stats tx_stats; u8 wolopts; u8 tx_thresh, rx_thresh; @@ -495,7 +503,8 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance); static void rhine_tx(struct net_device *dev); static int rhine_rx(struct net_device *dev, int limit); static void rhine_set_rx_mode(struct net_device *dev); -static struct net_device_stats *rhine_get_stats(struct net_device *dev); +static struct rtnl_link_stats64 *rhine_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats); static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static const struct ethtool_ops netdev_ethtool_ops; static int rhine_close(struct net_device *dev); @@ -842,7 +851,7 @@ static const struct net_device_ops rhine_netdev_ops = { .ndo_open = rhine_open, .ndo_stop = rhine_close, .ndo_start_xmit = rhine_start_tx, - .ndo_get_stats = rhine_get_stats, + .ndo_get_stats64 = rhine_get_stats64, .ndo_set_rx_mode = rhine_set_rx_mode, .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, @@ -1790,8 +1799,11 @@ static void rhine_tx(struct net_device *dev) dev->stats.collisions += txstatus & 0x0F; netif_dbg(rp, tx_done, dev, "collisions: %1.1x:%1.1x\n", (txstatus >> 3) & 0xF, txstatus & 0xF); - dev->stats.tx_bytes += rp->tx_skbuff[entry]->len; - dev->stats.tx_packets++; + + u64_stats_update_begin(&rp->tx_stats.syncp); + rp->tx_stats.bytes += rp->tx_skbuff[entry]->len; + rp->tx_stats.packets++; + u64_stats_update_end(&rp->tx_stats.syncp); } /* Free the original skb. */ if (rp->tx_skbuff_dma[entry]) { @@ -1923,8 +1935,11 @@ static int rhine_rx(struct net_device *dev, int limit) if (unlikely(desc_length & DescTag)) __vlan_hwaccel_put_tag(skb, vlan_tci); netif_receive_skb(skb); - dev->stats.rx_bytes += pkt_len; - dev->stats.rx_packets++; + + u64_stats_update_begin(&rp->rx_stats.syncp); + rp->rx_stats.bytes += pkt_len; + rp->rx_stats.packets++; + u64_stats_update_end(&rp->rx_stats.syncp); } entry = (++rp->cur_rx) % RX_RING_SIZE; rp->rx_head_desc = &rp->rx_ring[entry]; @@ -2019,15 +2034,31 @@ out_unlock: mutex_unlock(&rp->task_lock); } -static struct net_device_stats *rhine_get_stats(struct net_device *dev) +static struct rtnl_link_stats64 * +rhine_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) { struct rhine_private *rp = netdev_priv(dev); + unsigned int start; spin_lock_bh(&rp->lock); rhine_update_rx_crc_and_missed_errord(rp); spin_unlock_bh(&rp->lock); - return &dev->stats; + netdev_stats_to_stats64(stats, &dev->stats); + + do { + start = u64_stats_fetch_begin_bh(&rp->rx_stats.syncp); + stats->rx_packets = rp->rx_stats.packets; + stats->rx_bytes = rp->rx_stats.bytes; + } while (u64_stats_fetch_retry_bh(&rp->rx_stats.syncp, start)); + + do { + start = u64_stats_fetch_begin_bh(&rp->tx_stats.syncp); + stats->tx_packets = rp->tx_stats.packets; + stats->tx_bytes = rp->tx_stats.bytes; + } while (u64_stats_fetch_retry_bh(&rp->tx_stats.syncp, start)); + + return stats; } static void rhine_set_rx_mode(struct net_device *dev) -- cgit v0.10.2 From cdda88912d62f9603d27433338a18be83ef23ac1 Mon Sep 17 00:00:00 2001 From: "bingtian.ly@taobao.com" Date: Wed, 23 Jan 2013 20:35:28 +0000 Subject: net: avoid to hang up on sending due to sysctl configuration overflow. I found if we write a larger than 4GB value to some sysctl variables, the sending syscall will hang up forever, because these variables are 32 bits, such large values make them overflow to 0 or negative. This patch try to fix overflow or prevent from zero value setup of below sysctl variables: net.core.wmem_default net.core.rmem_default net.core.rmem_max net.core.wmem_max net.ipv4.udp_rmem_min net.ipv4.udp_wmem_min net.ipv4.tcp_wmem net.ipv4.tcp_rmem Signed-off-by: Eric Dumazet Signed-off-by: Li Yu Signed-off-by: David S. Miller diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c index d1b0804..cfdb46a 100644 --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -20,6 +20,8 @@ #include #include +static int one = 1; + #ifdef CONFIG_RPS static int rps_sock_flow_sysctl(ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos) @@ -92,28 +94,32 @@ static struct ctl_table net_core_table[] = { .data = &sysctl_wmem_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &one, }, { .procname = "rmem_max", .data = &sysctl_rmem_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &one, }, { .procname = "wmem_default", .data = &sysctl_wmem_default, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &one, }, { .procname = "rmem_default", .data = &sysctl_rmem_default, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &one, }, { .procname = "dev_weight", diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index a25e1d2..2622707 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -27,6 +27,7 @@ #include static int zero; +static int one = 1; static int two = 2; static int tcp_retr1_max = 255; static int ip_local_port_range_min[] = { 1, 1 }; @@ -549,14 +550,16 @@ static struct ctl_table ipv4_table[] = { .data = &sysctl_tcp_wmem, .maxlen = sizeof(sysctl_tcp_wmem), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &one, }, { .procname = "tcp_rmem", .data = &sysctl_tcp_rmem, .maxlen = sizeof(sysctl_tcp_rmem), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &one, }, { .procname = "tcp_app_win", @@ -779,7 +782,7 @@ static struct ctl_table ipv4_table[] = { .maxlen = sizeof(sysctl_udp_rmem_min), .mode = 0644, .proc_handler = proc_dointvec_minmax, - .extra1 = &zero + .extra1 = &one }, { .procname = "udp_wmem_min", @@ -787,7 +790,7 @@ static struct ctl_table ipv4_table[] = { .maxlen = sizeof(sysctl_udp_wmem_min), .mode = 0644, .proc_handler = proc_dointvec_minmax, - .extra1 = &zero + .extra1 = &one }, { } }; -- cgit v0.10.2 From 08433eff2d041b263c68306f6a6ccb4e1f75e196 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Thu, 24 Jan 2013 00:44:23 +0000 Subject: net neigh: Optimize neighbor entry size calculation. When allocating memory for neighbour cache entry, if tbl->entry_size is not set, we always calculate sizeof(struct neighbour) + tbl->key_len, which is common in the same table. With this change, set tbl->entry_size during the table initialization phase, if it was not set, and use it in neigh_alloc() and neighbour_priv(). This change also allow us to have both of protocol private data and device priate data at tha same time. Note that the only user of prototcol private is DECnet and the only user of device private is ATM CLIP. Since those are exclusive, we have not been facing issues here. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 0dab173..629ee57 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -184,7 +184,7 @@ struct neigh_table { static inline void *neighbour_priv(const struct neighbour *n) { - return (char *)n + ALIGN(sizeof(*n) + n->tbl->key_len, NEIGH_PRIV_ALIGN); + return (char *)n + n->tbl->entry_size; } /* flags for neigh_update() */ diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 7bd0eed..3863b8f 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -290,15 +290,7 @@ static struct neighbour *neigh_alloc(struct neigh_table *tbl, struct net_device goto out_entries; } - if (tbl->entry_size) - n = kzalloc(tbl->entry_size, GFP_ATOMIC); - else { - int sz = sizeof(*n) + tbl->key_len; - - sz = ALIGN(sz, NEIGH_PRIV_ALIGN); - sz += dev->neigh_priv_len; - n = kzalloc(sz, GFP_ATOMIC); - } + n = kzalloc(tbl->entry_size + dev->neigh_priv_len, GFP_ATOMIC); if (!n) goto out_entries; @@ -1546,6 +1538,12 @@ static void neigh_table_init_no_netlink(struct neigh_table *tbl) if (!tbl->nht || !tbl->phash_buckets) panic("cannot allocate neighbour cache hashes"); + if (!tbl->entry_size) + tbl->entry_size = ALIGN(offsetof(struct neighbour, primary_key) + + tbl->key_len, NEIGH_PRIV_ALIGN); + else + WARN_ON(tbl->entry_size % NEIGH_PRIV_ALIGN); + rwlock_init(&tbl->lock); INIT_DEFERRABLE_WORK(&tbl->gc_work, neigh_periodic_work); schedule_delayed_work(&tbl->gc_work, tbl->parms.reachable_time); -- cgit v0.10.2 From 8df6b7b11a5e4200484e9356073d288f08bdefb0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 28 Jan 2013 14:42:30 +0100 Subject: mac80211: remove IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL This is basically a revert of: commit 5b632fe85ec82e5c43740b52e74c66df50a37db3 Author: Stanislaw Gruszka Date: Mon Dec 3 12:56:33 2012 +0100 mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL We do not need this flag any longer, rt2x00 BAR/BA problem was fixed correctly by wireless-testing commit: commit 84e9e8ebd369679a958200a8baca96aafb2393bb Author: Helmut Schaa Date: Thu Jan 17 17:34:32 2013 +0100 rt2x00: Improve TX status handling for BlockAckReq frames Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5c98d65..21831ee 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1366,10 +1366,6 @@ struct ieee80211_tx_control { * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. - * - * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session - * should be tear down once BAR frame will not be acked. - * */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1398,7 +1394,6 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, - IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL = 1<<26, }; /** diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 07d9957..ab50285 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -502,11 +502,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) IEEE80211_BAR_CTRL_TID_INFO_MASK) >> IEEE80211_BAR_CTRL_TID_INFO_SHIFT; - if (local->hw.flags & - IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL) - ieee80211_stop_tx_ba_session(&sta->sta, tid); - else - ieee80211_set_bar_pending(sta, tid, ssn); + ieee80211_set_bar_pending(sta, tid, ssn); } } -- cgit v0.10.2 From 8dcf011ab05bf1fdd9323a9c460bdd0e325b99e1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 26 Jan 2013 22:16:08 +0100 Subject: cfg80211: add SME state to warning in __cfg80211_mlme_disassoc The warning here occasionally triggers but we haven't found the cause yet. It's a valid warning since if it triggers the SME state got confused, so add the SME state to it to help narrow it down in the future. Signed-off-by: Johannes Berg diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 461e692..fee9bf7 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -514,7 +514,7 @@ static int __cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev, if (wdev->sme_state != CFG80211_SME_CONNECTED) return -ENOTCONN; - if (WARN_ON(!wdev->current_bss)) + if (WARN(!wdev->current_bss, "sme_state=%d\n", wdev->sme_state)) return -ENOTCONN; memset(&req, 0, sizeof(req)); -- cgit v0.10.2 From ef3d56e189754e305add852110c3d6d863b6293c Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Wed, 16 Jan 2013 15:51:51 +0100 Subject: nfc: pn533: Use static poll_mod and std_frame_ops These variables are not exported. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index f696318..0d7caf7 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -219,7 +219,7 @@ struct pn533_poll_modulations { u8 len; }; -const struct pn533_poll_modulations poll_mod[] = { +static const struct pn533_poll_modulations poll_mod[] = { [PN533_POLL_MOD_106KBPS_A] = { .data = { .maxtg = 1, @@ -485,7 +485,7 @@ static u8 pn533_get_cmd_code(void *frame) return PN533_FRAME_CMD(f); } -struct pn533_frame_ops pn533_std_frame_ops = { +static struct pn533_frame_ops pn533_std_frame_ops = { .tx_frame_init = pn533_tx_frame_init, .tx_frame_finish = pn533_tx_frame_finish, .tx_update_payload_len = pn533_tx_update_payload_len, -- cgit v0.10.2 From 2323e6fc62eec19c3454642c0ac4ad42374b40a1 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Wed, 16 Jan 2013 15:51:52 +0100 Subject: nfc: pn533: Remove unreachable code Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 0d7caf7..bd5c41b 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -532,7 +532,6 @@ static void pn533_recv_response(struct urb *urb) urb->status); dev->wq_in_error = urb->status; goto sched_wq; - break; case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, @@ -589,7 +588,6 @@ static void pn533_recv_ack(struct urb *urb) urb->status); dev->wq_in_error = urb->status; goto sched_wq; - break; case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, -- cgit v0.10.2 From 656a05c899b4026ee828ccddd550202ded7a26c6 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 29 Jan 2013 09:16:30 +0200 Subject: net: ks8851: convert to threaded IRQ just as it should have been. It also helps removing the, now unnecessary, workqueue. Signed-off-by: Felipe Balbi Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index d59bc0e..33bcb63 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -69,7 +69,6 @@ union ks8851_tx_hdr { * @mii: The MII state information for the mii calls. * @rxctrl: RX settings for @rxctrl_work. * @tx_work: Work queue for tx packets - * @irq_work: Work queue for servicing interrupts * @rxctrl_work: Work queue for updating RX mode and multicast lists * @txq: Queue of packets for transmission. * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1. @@ -121,7 +120,6 @@ struct ks8851_net { struct ks8851_rxctrl rxctrl; struct work_struct tx_work; - struct work_struct irq_work; struct work_struct rxctrl_work; struct sk_buff_head txq; @@ -444,23 +442,6 @@ static void ks8851_init_mac(struct ks8851_net *ks) } /** - * ks8851_irq - device interrupt handler - * @irq: Interrupt number passed from the IRQ handler. - * @pw: The private word passed to register_irq(), our struct ks8851_net. - * - * Disable the interrupt from happening again until we've processed the - * current status by scheduling ks8851_irq_work(). - */ -static irqreturn_t ks8851_irq(int irq, void *pw) -{ - struct ks8851_net *ks = pw; - - disable_irq_nosync(irq); - schedule_work(&ks->irq_work); - return IRQ_HANDLED; -} - -/** * ks8851_rdfifo - read data from the receive fifo * @ks: The device state. * @buff: The buffer address @@ -595,19 +576,20 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) } /** - * ks8851_irq_work - work queue handler for dealing with interrupt requests - * @work: The work structure that was scheduled by schedule_work() + * ks8851_irq - IRQ handler for dealing with interrupt requests + * @irq: IRQ number + * @_ks: cookie * - * This is the handler invoked when the ks8851_irq() is called to find out - * what happened, as we cannot allow ourselves to sleep whilst waiting for - * anything other process has the chip's lock. + * This handler is invoked when the IRQ line asserts to find out what happened. + * As we cannot allow ourselves to sleep in HARDIRQ context, this handler runs + * in thread context. * * Read the interrupt status, work out what needs to be done and then clear * any of the interrupts that are not needed. */ -static void ks8851_irq_work(struct work_struct *work) +static irqreturn_t ks8851_irq(int irq, void *_ks) { - struct ks8851_net *ks = container_of(work, struct ks8851_net, irq_work); + struct ks8851_net *ks = _ks; unsigned status; unsigned handled = 0; @@ -688,7 +670,7 @@ static void ks8851_irq_work(struct work_struct *work) if (status & IRQ_TXI) netif_wake_queue(ks->netdev); - enable_irq(ks->netdev->irq); + return IRQ_HANDLED; } /** @@ -896,7 +878,6 @@ static int ks8851_net_stop(struct net_device *dev) mutex_unlock(&ks->lock); /* stop any outstanding work */ - flush_work(&ks->irq_work); flush_work(&ks->tx_work); flush_work(&ks->rxctrl_work); @@ -1437,7 +1418,6 @@ static int ks8851_probe(struct spi_device *spi) spin_lock_init(&ks->statelock); INIT_WORK(&ks->tx_work, ks8851_tx_work); - INIT_WORK(&ks->irq_work, ks8851_irq_work); INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work); /* initialise pre-made spi transfer messages */ @@ -1504,8 +1484,9 @@ static int ks8851_probe(struct spi_device *spi) ks8851_read_selftest(ks); ks8851_init_mac(ks); - ret = request_irq(spi->irq, ks8851_irq, IRQF_TRIGGER_LOW, - ndev->name, ks); + ret = request_threaded_irq(spi->irq, NULL, ks8851_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + ndev->name, ks); if (ret < 0) { dev_err(&spi->dev, "failed to get irq\n"); goto err_irq; -- cgit v0.10.2 From cd39a7890aed7433beb3188c7ad8591e260ebf10 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 28 Jan 2013 23:44:14 +0000 Subject: net: cacheline adjust struct netns_frags for better frag performance This small cacheline adjustment of struct netns_frags improves performance significantly for the fragmentation code. Struct members 'lru_list' and 'mem' are both hot elements, and it hurts performance, due to cacheline bouncing at every call point, when they share a cacheline. Also notice, how mem is placed together with 'high_thresh' and 'low_thresh', as they are used in the compare operations together. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h index 32786a0..91e7797 100644 --- a/include/net/inet_frag.h +++ b/include/net/inet_frag.h @@ -3,9 +3,12 @@ struct netns_frags { int nqueues; - atomic_t mem; struct list_head lru_list; + /* Its important for performance to keep lru_list and mem on + * separate cachelines + */ + atomic_t mem ____cacheline_aligned_in_smp; /* sysctls */ int timeout; int high_thresh; -- cgit v0.10.2 From 5f8e1e8b767bdb8e471d4f49612b88c606f8811e Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 28 Jan 2013 23:44:37 +0000 Subject: net: cacheline adjust struct inet_frags for better frag performance The globally shared rwlock, of struct inet_frags, shares cacheline with the 'rnd' number, which is used by the hash calculations. Fix this, as this obviously is a bad idea, as unnecessary cache-misses will occur when accessing the 'rnd' number. Also small note that, moving function ptr (*match) up in struct, is to avoid it lands on the next cacheline (on 64-bit). Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h index 91e7797..54c1de7 100644 --- a/include/net/inet_frag.h +++ b/include/net/inet_frag.h @@ -40,18 +40,21 @@ struct inet_frag_queue { struct inet_frags { struct hlist_head hash[INETFRAGS_HASHSZ]; - rwlock_t lock; - u32 rnd; - int qsize; + /* This rwlock is a global lock (seperate per IPv4, IPv6 and + * netfilter). Important to keep this on a seperate cacheline. + */ + rwlock_t lock ____cacheline_aligned_in_smp; int secret_interval; struct timer_list secret_timer; + u32 rnd; + int qsize; unsigned int (*hashfn)(struct inet_frag_queue *); + bool (*match)(struct inet_frag_queue *q, void *arg); void (*constructor)(struct inet_frag_queue *q, void *arg); void (*destructor)(struct inet_frag_queue *); void (*skb_free)(struct sk_buff *); - bool (*match)(struct inet_frag_queue *q, void *arg); void (*frag_expire)(unsigned long data); }; -- cgit v0.10.2 From 6e34a8b37aca63f109bf990d46131ee07206f5f1 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 28 Jan 2013 23:44:49 +0000 Subject: net: cacheline adjust struct inet_frag_queue Fragmentation code cacheline adjusting of struct inet_frag_queue. Take advantage of the size of struct timer_list, and move all but spinlock_t lock, below the timer struct. On 64-bit 'lru_list', 'list' and 'refcnt', fits exactly into the next cacheline, and a new cacheline starts at 'fragments'. The netns_frags *net pointer is moved to the end of the struct, because its used in a compare, with "next/close-by" elements of which this struct is embedded into. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h index 54c1de7..8e4c425 100644 --- a/include/net/inet_frag.h +++ b/include/net/inet_frag.h @@ -16,12 +16,11 @@ struct netns_frags { }; struct inet_frag_queue { - struct hlist_node list; - struct netns_frags *net; - struct list_head lru_list; /* lru list member */ spinlock_t lock; - atomic_t refcnt; struct timer_list timer; /* when will this queue expire? */ + struct list_head lru_list; /* lru list member */ + struct hlist_node list; + atomic_t refcnt; struct sk_buff *fragments; /* list of received fragments */ struct sk_buff *fragments_tail; ktime_t stamp; @@ -34,6 +33,8 @@ struct inet_frag_queue { #define INET_FRAG_LAST_IN 1 u16 max_size; + + struct netns_frags *net; }; #define INETFRAGS_HASHSZ 64 -- cgit v0.10.2 From d433673e5f9180e05a770c4b2ab18c08ad51cc21 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 28 Jan 2013 23:45:12 +0000 Subject: net: frag helper functions for mem limit tracking This change is primarily a preparation to ease the extension of memory limit tracking. The change does reduce the number atomic operation, during freeing of a frag queue. This does introduce a some performance improvement, as these atomic operations are at the core of the performance problems seen on NUMA systems. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h index 8e4c425..f2fabc2 100644 --- a/include/net/inet_frag.h +++ b/include/net/inet_frag.h @@ -79,4 +79,31 @@ static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f inet_frag_destroy(q, f, NULL); } +/* Memory Tracking Functions. */ + +static inline int frag_mem_limit(struct netns_frags *nf) +{ + return atomic_read(&nf->mem); +} + +static inline void sub_frag_mem_limit(struct inet_frag_queue *q, int i) +{ + atomic_sub(i, &q->net->mem); +} + +static inline void add_frag_mem_limit(struct inet_frag_queue *q, int i) +{ + atomic_add(i, &q->net->mem); +} + +static inline void init_frag_mem_limit(struct netns_frags *nf) +{ + atomic_set(&nf->mem, 0); +} + +static inline int sum_frag_mem_limit(struct netns_frags *nf) +{ + return atomic_read(&nf->mem); +} + #endif diff --git a/include/net/ipv6.h b/include/net/ipv6.h index c1878f7..dc30b60 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -288,7 +288,7 @@ static inline int ip6_frag_nqueues(struct net *net) static inline int ip6_frag_mem(struct net *net) { - return atomic_read(&net->ipv6.frags.mem); + return sum_frag_mem_limit(&net->ipv6.frags); } #endif diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 4750d2b..e348c84 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -73,7 +73,7 @@ EXPORT_SYMBOL(inet_frags_init); void inet_frags_init_net(struct netns_frags *nf) { nf->nqueues = 0; - atomic_set(&nf->mem, 0); + init_frag_mem_limit(nf); INIT_LIST_HEAD(&nf->lru_list); } EXPORT_SYMBOL(inet_frags_init_net); @@ -117,12 +117,8 @@ void inet_frag_kill(struct inet_frag_queue *fq, struct inet_frags *f) EXPORT_SYMBOL(inet_frag_kill); static inline void frag_kfree_skb(struct netns_frags *nf, struct inet_frags *f, - struct sk_buff *skb, int *work) + struct sk_buff *skb) { - if (work) - *work -= skb->truesize; - - atomic_sub(skb->truesize, &nf->mem); if (f->skb_free) f->skb_free(skb); kfree_skb(skb); @@ -133,6 +129,7 @@ void inet_frag_destroy(struct inet_frag_queue *q, struct inet_frags *f, { struct sk_buff *fp; struct netns_frags *nf; + unsigned int sum, sum_truesize = 0; WARN_ON(!(q->last_in & INET_FRAG_COMPLETE)); WARN_ON(del_timer(&q->timer) != 0); @@ -143,13 +140,14 @@ void inet_frag_destroy(struct inet_frag_queue *q, struct inet_frags *f, while (fp) { struct sk_buff *xp = fp->next; - frag_kfree_skb(nf, f, fp, work); + sum_truesize += fp->truesize; + frag_kfree_skb(nf, f, fp); fp = xp; } - + sum = sum_truesize + f->qsize; if (work) - *work -= f->qsize; - atomic_sub(f->qsize, &nf->mem); + *work -= sum; + sub_frag_mem_limit(q, sum); if (f->destructor) f->destructor(q); @@ -164,11 +162,11 @@ int inet_frag_evictor(struct netns_frags *nf, struct inet_frags *f, bool force) int work, evicted = 0; if (!force) { - if (atomic_read(&nf->mem) <= nf->high_thresh) + if (frag_mem_limit(nf) <= nf->high_thresh) return 0; } - work = atomic_read(&nf->mem) - nf->low_thresh; + work = frag_mem_limit(nf) - nf->low_thresh; while (work > 0) { read_lock(&f->lock); if (list_empty(&nf->lru_list)) { @@ -250,7 +248,8 @@ static struct inet_frag_queue *inet_frag_alloc(struct netns_frags *nf, q->net = nf; f->constructor(q, arg); - atomic_add(f->qsize, &nf->mem); + add_frag_mem_limit(q, f->qsize); + setup_timer(&q->timer, f->frag_expire, (unsigned long)q); spin_lock_init(&q->lock); atomic_set(&q->refcnt, 1); diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index f55a4e6..927fe58 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -122,7 +122,7 @@ int ip_frag_nqueues(struct net *net) int ip_frag_mem(struct net *net) { - return atomic_read(&net->ipv4.frags.mem); + return sum_frag_mem_limit(&net->ipv4.frags); } static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev, @@ -161,13 +161,6 @@ static bool ip4_frag_match(struct inet_frag_queue *q, void *a) qp->user == arg->user; } -/* Memory Tracking Functions. */ -static void frag_kfree_skb(struct netns_frags *nf, struct sk_buff *skb) -{ - atomic_sub(skb->truesize, &nf->mem); - kfree_skb(skb); -} - static void ip4_frag_init(struct inet_frag_queue *q, void *a) { struct ipq *qp = container_of(q, struct ipq, q); @@ -340,6 +333,7 @@ static inline int ip_frag_too_far(struct ipq *qp) static int ip_frag_reinit(struct ipq *qp) { struct sk_buff *fp; + unsigned int sum_truesize = 0; if (!mod_timer(&qp->q.timer, jiffies + qp->q.net->timeout)) { atomic_inc(&qp->q.refcnt); @@ -349,9 +343,12 @@ static int ip_frag_reinit(struct ipq *qp) fp = qp->q.fragments; do { struct sk_buff *xp = fp->next; - frag_kfree_skb(qp->q.net, fp); + + sum_truesize += fp->truesize; + kfree_skb(fp); fp = xp; } while (fp); + sub_frag_mem_limit(&qp->q, sum_truesize); qp->q.last_in = 0; qp->q.len = 0; @@ -496,7 +493,8 @@ found: qp->q.fragments = next; qp->q.meat -= free_it->len; - frag_kfree_skb(qp->q.net, free_it); + sub_frag_mem_limit(&qp->q, free_it->truesize); + kfree_skb(free_it); } } @@ -519,7 +517,7 @@ found: qp->q.stamp = skb->tstamp; qp->q.meat += skb->len; qp->ecn |= ecn; - atomic_add(skb->truesize, &qp->q.net->mem); + add_frag_mem_limit(&qp->q, skb->truesize); if (offset == 0) qp->q.last_in |= INET_FRAG_FIRST_IN; @@ -617,7 +615,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev, head->len -= clone->len; clone->csum = 0; clone->ip_summed = head->ip_summed; - atomic_add(clone->truesize, &qp->q.net->mem); + add_frag_mem_limit(&qp->q, clone->truesize); } skb_push(head, head->data - skb_network_header(head)); @@ -645,7 +643,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev, } fp = next; } - atomic_sub(sum_truesize, &qp->q.net->mem); + sub_frag_mem_limit(&qp->q, sum_truesize); head->next = NULL; head->dev = dev; diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 3dacecc..07ef294 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -319,7 +319,7 @@ found: fq->q.meat += skb->len; if (payload_len > fq->q.max_size) fq->q.max_size = payload_len; - atomic_add(skb->truesize, &fq->q.net->mem); + add_frag_mem_limit(&fq->q, skb->truesize); /* The first fragment. * nhoffset is obtained from the first fragment, of course. @@ -398,7 +398,7 @@ nf_ct_frag6_reasm(struct frag_queue *fq, struct net_device *dev) clone->ip_summed = head->ip_summed; NFCT_FRAG6_CB(clone)->orig = NULL; - atomic_add(clone->truesize, &fq->q.net->mem); + add_frag_mem_limit(&fq->q, clone->truesize); } /* We have to remove fragment header from datagram and to relocate @@ -422,7 +422,7 @@ nf_ct_frag6_reasm(struct frag_queue *fq, struct net_device *dev) head->csum = csum_add(head->csum, fp->csum); head->truesize += fp->truesize; } - atomic_sub(head->truesize, &fq->q.net->mem); + sub_frag_mem_limit(&fq->q, head->truesize); head->local_df = 1; head->next = NULL; diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index e5253ec..18cb8de 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -327,7 +327,7 @@ found: } fq->q.stamp = skb->tstamp; fq->q.meat += skb->len; - atomic_add(skb->truesize, &fq->q.net->mem); + add_frag_mem_limit(&fq->q, skb->truesize); /* The first fragment. * nhoffset is obtained from the first fragment, of course. @@ -429,7 +429,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev, head->len -= clone->len; clone->csum = 0; clone->ip_summed = head->ip_summed; - atomic_add(clone->truesize, &fq->q.net->mem); + add_frag_mem_limit(&fq->q, clone->truesize); } /* We have to remove fragment header from datagram and to relocate @@ -467,7 +467,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev, } fp = next; } - atomic_sub(sum_truesize, &fq->q.net->mem); + sub_frag_mem_limit(&fq->q, sum_truesize); head->next = NULL; head->dev = dev; -- cgit v0.10.2 From 6d7b857d541ecd1d9bd997c97242d4ef94b19de2 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 28 Jan 2013 23:45:33 +0000 Subject: net: use lib/percpu_counter API for fragmentation mem accounting Replace the per network namespace shared atomic "mem" accounting variable, in the fragmentation code, with a lib/percpu_counter. Getting percpu_counter to scale to the fragmentation code usage requires some tweaks. At first view, percpu_counter looks superfast, but it does not scale on multi-CPU/NUMA machines, because the default batch size is too small, for frag code usage. Thus, I have adjusted the batch size by using __percpu_counter_add() directly, instead of percpu_counter_sub() and percpu_counter_add(). The batch size is increased to 130.000, based on the largest 64K fragment memory usage. This does introduce some imprecise memory accounting, but its does not need to be strict for this use-case. It is also essential, that the percpu_counter, does not share cacheline with other writers, to make this scale. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h index f2fabc2..e0eec74 100644 --- a/include/net/inet_frag.h +++ b/include/net/inet_frag.h @@ -1,14 +1,17 @@ #ifndef __NET_FRAG_H__ #define __NET_FRAG_H__ +#include + struct netns_frags { int nqueues; struct list_head lru_list; - /* Its important for performance to keep lru_list and mem on - * separate cachelines + /* The percpu_counter "mem" need to be cacheline aligned. + * mem.count must not share cacheline with other writers */ - atomic_t mem ____cacheline_aligned_in_smp; + struct percpu_counter mem ____cacheline_aligned_in_smp; + /* sysctls */ int timeout; int high_thresh; @@ -81,29 +84,36 @@ static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f /* Memory Tracking Functions. */ +/* The default percpu_counter batch size is not big enough to scale to + * fragmentation mem acct sizes. + * The mem size of a 64K fragment is approx: + * (44 fragments * 2944 truesize) + frag_queue struct(200) = 129736 bytes + */ +static unsigned int frag_percpu_counter_batch = 130000; + static inline int frag_mem_limit(struct netns_frags *nf) { - return atomic_read(&nf->mem); + return percpu_counter_read(&nf->mem); } static inline void sub_frag_mem_limit(struct inet_frag_queue *q, int i) { - atomic_sub(i, &q->net->mem); + __percpu_counter_add(&q->net->mem, -i, frag_percpu_counter_batch); } static inline void add_frag_mem_limit(struct inet_frag_queue *q, int i) { - atomic_add(i, &q->net->mem); + __percpu_counter_add(&q->net->mem, i, frag_percpu_counter_batch); } static inline void init_frag_mem_limit(struct netns_frags *nf) { - atomic_set(&nf->mem, 0); + percpu_counter_init(&nf->mem, 0); } static inline int sum_frag_mem_limit(struct netns_frags *nf) { - return atomic_read(&nf->mem); + return percpu_counter_sum_positive(&nf->mem); } #endif diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index e348c84..b825205 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -91,6 +91,8 @@ void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f) local_bh_disable(); inet_frag_evictor(nf, f, true); local_bh_enable(); + + percpu_counter_destroy(&nf->mem); } EXPORT_SYMBOL(inet_frags_exit_net); -- cgit v0.10.2 From 3ef0eb0db4bf92c6d2510fe5c4dc51852746f206 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 28 Jan 2013 23:45:51 +0000 Subject: net: frag, move LRU list maintenance outside of rwlock Updating the fragmentation queues LRU (Least-Recently-Used) list, required taking the hash writer lock. However, the LRU list isn't tied to the hash at all, so we can use a separate lock for it. Original-idea-by: Florian Westphal Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h index e0eec74..3f237db 100644 --- a/include/net/inet_frag.h +++ b/include/net/inet_frag.h @@ -6,6 +6,7 @@ struct netns_frags { int nqueues; struct list_head lru_list; + spinlock_t lru_lock; /* The percpu_counter "mem" need to be cacheline aligned. * mem.count must not share cacheline with other writers @@ -116,4 +117,25 @@ static inline int sum_frag_mem_limit(struct netns_frags *nf) return percpu_counter_sum_positive(&nf->mem); } +static inline void inet_frag_lru_move(struct inet_frag_queue *q) +{ + spin_lock(&q->net->lru_lock); + list_move_tail(&q->lru_list, &q->net->lru_list); + spin_unlock(&q->net->lru_lock); +} + +static inline void inet_frag_lru_del(struct inet_frag_queue *q) +{ + spin_lock(&q->net->lru_lock); + list_del(&q->lru_list); + spin_unlock(&q->net->lru_lock); +} + +static inline void inet_frag_lru_add(struct netns_frags *nf, + struct inet_frag_queue *q) +{ + spin_lock(&nf->lru_lock); + list_add_tail(&q->lru_list, &nf->lru_list); + spin_unlock(&nf->lru_lock); +} #endif diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index b825205..2e453bd 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -75,6 +75,7 @@ void inet_frags_init_net(struct netns_frags *nf) nf->nqueues = 0; init_frag_mem_limit(nf); INIT_LIST_HEAD(&nf->lru_list); + spin_lock_init(&nf->lru_lock); } EXPORT_SYMBOL(inet_frags_init_net); @@ -100,9 +101,9 @@ static inline void fq_unlink(struct inet_frag_queue *fq, struct inet_frags *f) { write_lock(&f->lock); hlist_del(&fq->list); - list_del(&fq->lru_list); fq->net->nqueues--; write_unlock(&f->lock); + inet_frag_lru_del(fq); } void inet_frag_kill(struct inet_frag_queue *fq, struct inet_frags *f) @@ -170,16 +171,17 @@ int inet_frag_evictor(struct netns_frags *nf, struct inet_frags *f, bool force) work = frag_mem_limit(nf) - nf->low_thresh; while (work > 0) { - read_lock(&f->lock); + spin_lock(&nf->lru_lock); + if (list_empty(&nf->lru_list)) { - read_unlock(&f->lock); + spin_unlock(&nf->lru_lock); break; } q = list_first_entry(&nf->lru_list, struct inet_frag_queue, lru_list); atomic_inc(&q->refcnt); - read_unlock(&f->lock); + spin_unlock(&nf->lru_lock); spin_lock(&q->lock); if (!(q->last_in & INET_FRAG_COMPLETE)) @@ -233,9 +235,9 @@ static struct inet_frag_queue *inet_frag_intern(struct netns_frags *nf, atomic_inc(&qp->refcnt); hlist_add_head(&qp->list, &f->hash[hash]); - list_add_tail(&qp->lru_list, &nf->lru_list); nf->nqueues++; write_unlock(&f->lock); + inet_frag_lru_add(nf, qp); return qp; } diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 927fe58..1211613 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -529,9 +529,7 @@ found: qp->q.meat == qp->q.len) return ip_frag_reasm(qp, prev, dev); - write_lock(&ip4_frags.lock); - list_move_tail(&qp->q.lru_list, &qp->q.net->lru_list); - write_unlock(&ip4_frags.lock); + inet_frag_lru_move(&qp->q); return -EINPROGRESS; err: diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 07ef294..c674f15 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -328,9 +328,8 @@ found: fq->nhoffset = nhoff; fq->q.last_in |= INET_FRAG_FIRST_IN; } - write_lock(&nf_frags.lock); - list_move_tail(&fq->q.lru_list, &fq->q.net->lru_list); - write_unlock(&nf_frags.lock); + + inet_frag_lru_move(&fq->q); return 0; discard_fq: diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 18cb8de..bab2c27 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -341,9 +341,7 @@ found: fq->q.meat == fq->q.len) return ip6_frag_reasm(fq, prev, dev); - write_lock(&ip6_frags.lock); - list_move_tail(&fq->q.lru_list, &fq->q.net->lru_list); - write_unlock(&ip6_frags.lock); + inet_frag_lru_move(&fq->q); return -1; discard_fq: -- cgit v0.10.2 From 5c766d642bcaffd0c2a5b354db2068515b3846cf Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 24 Jan 2013 09:41:41 +0000 Subject: ipv4: introduce address lifetime MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are some usecase when lifetime of ipv4 addresses might be helpful. For example: 1) initramfs networkmanager uses a DHCP daemon to learn network configuration parameters 2) initramfs networkmanager addresses, routes and DNS configuration 3) initramfs networkmanager is requested to stop 4) initramfs networkmanager stops all daemons including dhclient 5) there are addresses and routes configured but no daemon running. If the system doesn't start networkmanager for some reason, addresses and routes will be used forever, which violates RFC 2131. This patch is essentially a backport of ivp6 address lifetime mechanism for ipv4 addresses. Current "ip" tool supports this without any patch (since it does not distinguish between ipv4 and ipv6 addresses in this perspective. Also, this should be back-compatible with all current netlink users. Reported-by: Pavel Šimerda Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index a9d8289..ea1e3b8 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -166,6 +166,12 @@ struct in_ifaddr { unsigned char ifa_flags; unsigned char ifa_prefixlen; char ifa_label[IFNAMSIZ]; + + /* In seconds, relative to tstamp. Expiry is at tstamp + HZ * lft. */ + __u32 ifa_valid_lft; + __u32 ifa_preferred_lft; + unsigned long ifa_cstamp; /* created timestamp */ + unsigned long ifa_tstamp; /* updated timestamp */ }; extern int register_inetaddr_notifier(struct notifier_block *nb); diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 6c58d50..40be2a0 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -15,6 +15,10 @@ #define IPV6_MAX_ADDRESSES 16 +#define ADDRCONF_TIMER_FUZZ_MINUS (HZ > 50 ? HZ / 50 : 1) +#define ADDRCONF_TIMER_FUZZ (HZ / 4) +#define ADDRCONF_TIMER_FUZZ_MAX (HZ) + #include #include diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index a8e4f26..5281314 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -63,6 +63,7 @@ #include #include #include +#include #include "fib_lookup.h" @@ -93,6 +94,7 @@ static const struct nla_policy ifa_ipv4_policy[IFA_MAX+1] = { [IFA_ADDRESS] = { .type = NLA_U32 }, [IFA_BROADCAST] = { .type = NLA_U32 }, [IFA_LABEL] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, + [IFA_CACHEINFO] = { .len = sizeof(struct ifa_cacheinfo) }, }; #define IN4_ADDR_HSIZE_SHIFT 8 @@ -417,6 +419,10 @@ static void inet_del_ifa(struct in_device *in_dev, struct in_ifaddr **ifap, __inet_del_ifa(in_dev, ifap, destroy, NULL, 0); } +static void check_lifetime(struct work_struct *work); + +static DECLARE_DELAYED_WORK(check_lifetime_work, check_lifetime); + static int __inet_insert_ifa(struct in_ifaddr *ifa, struct nlmsghdr *nlh, u32 portid) { @@ -462,6 +468,9 @@ static int __inet_insert_ifa(struct in_ifaddr *ifa, struct nlmsghdr *nlh, inet_hash_insert(dev_net(in_dev->dev), ifa); + cancel_delayed_work(&check_lifetime_work); + schedule_delayed_work(&check_lifetime_work, 0); + /* Send message first, then call notifier. Notifier will trigger FIB update, so that listeners of netlink will know about new ifaddr */ @@ -573,7 +582,107 @@ errout: return err; } -static struct in_ifaddr *rtm_to_ifaddr(struct net *net, struct nlmsghdr *nlh) +#define INFINITY_LIFE_TIME 0xFFFFFFFF + +static void check_lifetime(struct work_struct *work) +{ + unsigned long now, next, next_sec, next_sched; + struct in_ifaddr *ifa; + struct hlist_node *node; + int i; + + now = jiffies; + next = round_jiffies_up(now + ADDR_CHECK_FREQUENCY); + + rcu_read_lock(); + for (i = 0; i < IN4_ADDR_HSIZE; i++) { + hlist_for_each_entry_rcu(ifa, node, + &inet_addr_lst[i], hash) { + unsigned long age; + + if (ifa->ifa_flags & IFA_F_PERMANENT) + continue; + + /* We try to batch several events at once. */ + age = (now - ifa->ifa_tstamp + + ADDRCONF_TIMER_FUZZ_MINUS) / HZ; + + if (ifa->ifa_valid_lft != INFINITY_LIFE_TIME && + age >= ifa->ifa_valid_lft) { + struct in_ifaddr **ifap ; + + rtnl_lock(); + for (ifap = &ifa->ifa_dev->ifa_list; + *ifap != NULL; ifap = &ifa->ifa_next) { + if (*ifap == ifa) + inet_del_ifa(ifa->ifa_dev, + ifap, 1); + } + rtnl_unlock(); + } else if (ifa->ifa_preferred_lft == + INFINITY_LIFE_TIME) { + continue; + } else if (age >= ifa->ifa_preferred_lft) { + if (time_before(ifa->ifa_tstamp + + ifa->ifa_valid_lft * HZ, next)) + next = ifa->ifa_tstamp + + ifa->ifa_valid_lft * HZ; + + if (!(ifa->ifa_flags & IFA_F_DEPRECATED)) { + ifa->ifa_flags |= IFA_F_DEPRECATED; + rtmsg_ifa(RTM_NEWADDR, ifa, NULL, 0); + } + } else if (time_before(ifa->ifa_tstamp + + ifa->ifa_preferred_lft * HZ, + next)) { + next = ifa->ifa_tstamp + + ifa->ifa_preferred_lft * HZ; + } + } + } + rcu_read_unlock(); + + next_sec = round_jiffies_up(next); + next_sched = next; + + /* If rounded timeout is accurate enough, accept it. */ + if (time_before(next_sec, next + ADDRCONF_TIMER_FUZZ)) + next_sched = next_sec; + + now = jiffies; + /* And minimum interval is ADDRCONF_TIMER_FUZZ_MAX. */ + if (time_before(next_sched, now + ADDRCONF_TIMER_FUZZ_MAX)) + next_sched = now + ADDRCONF_TIMER_FUZZ_MAX; + + schedule_delayed_work(&check_lifetime_work, next_sched - now); +} + +static void set_ifa_lifetime(struct in_ifaddr *ifa, __u32 valid_lft, + __u32 prefered_lft) +{ + unsigned long timeout; + + ifa->ifa_flags &= ~(IFA_F_PERMANENT | IFA_F_DEPRECATED); + + timeout = addrconf_timeout_fixup(valid_lft, HZ); + if (addrconf_finite_timeout(timeout)) + ifa->ifa_valid_lft = timeout; + else + ifa->ifa_flags |= IFA_F_PERMANENT; + + timeout = addrconf_timeout_fixup(prefered_lft, HZ); + if (addrconf_finite_timeout(timeout)) { + if (timeout == 0) + ifa->ifa_flags |= IFA_F_DEPRECATED; + ifa->ifa_preferred_lft = timeout; + } + ifa->ifa_tstamp = jiffies; + if (!ifa->ifa_cstamp) + ifa->ifa_cstamp = ifa->ifa_tstamp; +} + +static struct in_ifaddr *rtm_to_ifaddr(struct net *net, struct nlmsghdr *nlh, + __u32 *pvalid_lft, __u32 *pprefered_lft) { struct nlattr *tb[IFA_MAX+1]; struct in_ifaddr *ifa; @@ -633,24 +742,73 @@ static struct in_ifaddr *rtm_to_ifaddr(struct net *net, struct nlmsghdr *nlh) else memcpy(ifa->ifa_label, dev->name, IFNAMSIZ); + if (tb[IFA_CACHEINFO]) { + struct ifa_cacheinfo *ci; + + ci = nla_data(tb[IFA_CACHEINFO]); + if (!ci->ifa_valid || ci->ifa_prefered > ci->ifa_valid) { + err = -EINVAL; + goto errout; + } + *pvalid_lft = ci->ifa_valid; + *pprefered_lft = ci->ifa_prefered; + } + return ifa; errout: return ERR_PTR(err); } +static struct in_ifaddr *find_matching_ifa(struct in_ifaddr *ifa) +{ + struct in_device *in_dev = ifa->ifa_dev; + struct in_ifaddr *ifa1, **ifap; + + if (!ifa->ifa_local) + return NULL; + + for (ifap = &in_dev->ifa_list; (ifa1 = *ifap) != NULL; + ifap = &ifa1->ifa_next) { + if (ifa1->ifa_mask == ifa->ifa_mask && + inet_ifa_match(ifa1->ifa_address, ifa) && + ifa1->ifa_local == ifa->ifa_local) + return ifa1; + } + return NULL; +} + static int inet_rtm_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) { struct net *net = sock_net(skb->sk); struct in_ifaddr *ifa; + struct in_ifaddr *ifa_existing; + __u32 valid_lft = INFINITY_LIFE_TIME; + __u32 prefered_lft = INFINITY_LIFE_TIME; ASSERT_RTNL(); - ifa = rtm_to_ifaddr(net, nlh); + ifa = rtm_to_ifaddr(net, nlh, &valid_lft, &prefered_lft); if (IS_ERR(ifa)) return PTR_ERR(ifa); - return __inet_insert_ifa(ifa, nlh, NETLINK_CB(skb).portid); + ifa_existing = find_matching_ifa(ifa); + if (!ifa_existing) { + /* It would be best to check for !NLM_F_CREATE here but + * userspace alreay relies on not having to provide this. + */ + set_ifa_lifetime(ifa, valid_lft, prefered_lft); + return __inet_insert_ifa(ifa, nlh, NETLINK_CB(skb).portid); + } else { + inet_free_ifa(ifa); + + if (nlh->nlmsg_flags & NLM_F_EXCL || + !(nlh->nlmsg_flags & NLM_F_REPLACE)) + return -EEXIST; + + set_ifa_lifetime(ifa_existing, valid_lft, prefered_lft); + } + return 0; } /* @@ -852,6 +1010,7 @@ int devinet_ioctl(struct net *net, unsigned int cmd, void __user *arg) ifa->ifa_prefixlen = 32; ifa->ifa_mask = inet_make_mask(32); } + set_ifa_lifetime(ifa, INFINITY_LIFE_TIME, INFINITY_LIFE_TIME); ret = inet_set_ifa(dev, ifa); break; @@ -1190,6 +1349,8 @@ static int inetdev_event(struct notifier_block *this, unsigned long event, ifa->ifa_dev = in_dev; ifa->ifa_scope = RT_SCOPE_HOST; memcpy(ifa->ifa_label, dev->name, IFNAMSIZ); + set_ifa_lifetime(ifa, INFINITY_LIFE_TIME, + INFINITY_LIFE_TIME); inet_insert_ifa(ifa); } } @@ -1246,11 +1407,30 @@ static size_t inet_nlmsg_size(void) + nla_total_size(IFNAMSIZ); /* IFA_LABEL */ } +static inline u32 cstamp_delta(unsigned long cstamp) +{ + return (cstamp - INITIAL_JIFFIES) * 100UL / HZ; +} + +static int put_cacheinfo(struct sk_buff *skb, unsigned long cstamp, + unsigned long tstamp, u32 preferred, u32 valid) +{ + struct ifa_cacheinfo ci; + + ci.cstamp = cstamp_delta(cstamp); + ci.tstamp = cstamp_delta(tstamp); + ci.ifa_prefered = preferred; + ci.ifa_valid = valid; + + return nla_put(skb, IFA_CACHEINFO, sizeof(ci), &ci); +} + static int inet_fill_ifaddr(struct sk_buff *skb, struct in_ifaddr *ifa, u32 portid, u32 seq, int event, unsigned int flags) { struct ifaddrmsg *ifm; struct nlmsghdr *nlh; + u32 preferred, valid; nlh = nlmsg_put(skb, portid, seq, event, sizeof(*ifm), flags); if (nlh == NULL) @@ -1259,10 +1439,31 @@ static int inet_fill_ifaddr(struct sk_buff *skb, struct in_ifaddr *ifa, ifm = nlmsg_data(nlh); ifm->ifa_family = AF_INET; ifm->ifa_prefixlen = ifa->ifa_prefixlen; - ifm->ifa_flags = ifa->ifa_flags|IFA_F_PERMANENT; + ifm->ifa_flags = ifa->ifa_flags; ifm->ifa_scope = ifa->ifa_scope; ifm->ifa_index = ifa->ifa_dev->dev->ifindex; + if (!(ifm->ifa_flags & IFA_F_PERMANENT)) { + preferred = ifa->ifa_preferred_lft; + valid = ifa->ifa_valid_lft; + if (preferred != INFINITY_LIFE_TIME) { + long tval = (jiffies - ifa->ifa_tstamp) / HZ; + + if (preferred > tval) + preferred -= tval; + else + preferred = 0; + if (valid != INFINITY_LIFE_TIME) { + if (valid > tval) + valid -= tval; + else + valid = 0; + } + } + } else { + preferred = INFINITY_LIFE_TIME; + valid = INFINITY_LIFE_TIME; + } if ((ifa->ifa_address && nla_put_be32(skb, IFA_ADDRESS, ifa->ifa_address)) || (ifa->ifa_local && @@ -1270,7 +1471,9 @@ static int inet_fill_ifaddr(struct sk_buff *skb, struct in_ifaddr *ifa, (ifa->ifa_broadcast && nla_put_be32(skb, IFA_BROADCAST, ifa->ifa_broadcast)) || (ifa->ifa_label[0] && - nla_put_string(skb, IFA_LABEL, ifa->ifa_label))) + nla_put_string(skb, IFA_LABEL, ifa->ifa_label)) || + put_cacheinfo(skb, ifa->ifa_cstamp, ifa->ifa_tstamp, + preferred, valid)) goto nla_put_failure; return nlmsg_end(skb, nlh); @@ -1988,6 +2191,8 @@ void __init devinet_init(void) register_gifconf(PF_INET, inet_gifconf); register_netdevice_notifier(&ip_netdev_notifier); + schedule_delayed_work(&check_lifetime_work, 0); + rtnl_af_register(&inet_af_ops); rtnl_register(PF_INET, RTM_NEWADDR, inet_rtm_newaddr, NULL, NULL); diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 80d5980..7f7332b 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -110,10 +110,6 @@ static inline u32 cstamp_delta(unsigned long cstamp) return (cstamp - INITIAL_JIFFIES) * 100UL / HZ; } -#define ADDRCONF_TIMER_FUZZ_MINUS (HZ > 50 ? HZ/50 : 1) -#define ADDRCONF_TIMER_FUZZ (HZ / 4) -#define ADDRCONF_TIMER_FUZZ_MAX (HZ) - #ifdef CONFIG_SYSCTL static void addrconf_sysctl_register(struct inet6_dev *idev); static void addrconf_sysctl_unregister(struct inet6_dev *idev); -- cgit v0.10.2 From 040468a0a7b3f9c7966126d98151bc64f1423657 Mon Sep 17 00:00:00 2001 From: David Ward Date: Sun, 27 Jan 2013 13:04:58 +0000 Subject: ip_gre: When TOS is inherited, use configured TOS value for non-IP packets A GRE tunnel can be configured so that outgoing tunnel packets inherit the value of the TOS field from the inner IP header. In doing so, when a non-IP packet is transmitted through the tunnel, the TOS field will always be set to 0. Instead, the user should be able to configure a different TOS value as the fallback to use for non-IP packets. This is helpful when the non-IP packets are all control packets and should be handled by routers outside the tunnel as having Internet Control precedence. One example of this is the NHRP packets that control a DMVPN-compatible mGRE tunnel; they are encapsulated directly by GRE and do not contain an inner IP header. Under the existing behavior, the IFLA_GRE_TOS parameter must be set to '1' for the TOS value to be inherited. Now, only the least significant bit of this parameter must be set to '1', and when a non-IP packet is sent through the tunnel, the upper 6 bits of this same parameter will be copied into the TOS field. (The ECN bits get masked off as before.) This behavior is backwards-compatible with existing configurations and iproute2 versions. Signed-off-by: David Ward Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index af6be70..801e023 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -820,8 +820,8 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev ttl = tiph->ttl; tos = tiph->tos; - if (tos == 1) { - tos = 0; + if (tos & 0x1) { + tos &= ~0x1; if (skb->protocol == htons(ETH_P_IP)) tos = old_iph->tos; else if (skb->protocol == htons(ETH_P_IPV6)) -- cgit v0.10.2 From 72aa8e1b29ecaed52a2a9ce1cb838563f9374007 Mon Sep 17 00:00:00 2001 From: Barry Grussling Date: Sun, 27 Jan 2013 18:44:36 +0000 Subject: ethoc: Cleanup driver format Cleanup the format of ethoc.c to meet network driver style as per checkpatch.pl. Signed-off-by: Barry Grussling Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index aa47ef9..5722bc6 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -206,7 +206,7 @@ struct ethoc { unsigned int num_rx; unsigned int cur_rx; - void** vma; + void **vma; struct net_device *netdev; struct napi_struct napi; @@ -292,7 +292,7 @@ static int ethoc_init_ring(struct ethoc *dev, unsigned long mem_start) { struct ethoc_bd bd; int i; - void* vma; + void *vma; dev->cur_tx = 0; dev->dty_tx = 0; @@ -447,8 +447,8 @@ static int ethoc_rx(struct net_device *dev, int limit) netif_receive_skb(skb); } else { if (net_ratelimit()) - dev_warn(&dev->dev, "low on memory - " - "packet dropped\n"); + dev_warn(&dev->dev, + "low on memory - packet dropped\n"); dev->stats.rx_dropped++; break; @@ -555,9 +555,8 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id) pending = ethoc_read(priv, INT_SOURCE); pending &= mask; - if (unlikely(pending == 0)) { + if (unlikely(pending == 0)) return IRQ_NONE; - } ethoc_ack_irq(priv, pending); @@ -620,7 +619,7 @@ static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg) ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg)); ethoc_write(priv, MIICOMMAND, MIICOMMAND_READ); - for (i=0; i < 5; i++) { + for (i = 0; i < 5; i++) { u32 status = ethoc_read(priv, MIISTATUS); if (!(status & MIISTATUS_BUSY)) { u32 data = ethoc_read(priv, MIIRX_DATA); @@ -628,7 +627,7 @@ static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg) ethoc_write(priv, MIICOMMAND, 0); return data; } - usleep_range(100,200); + usleep_range(100, 200); } return -EBUSY; @@ -643,14 +642,14 @@ static int ethoc_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val) ethoc_write(priv, MIITX_DATA, val); ethoc_write(priv, MIICOMMAND, MIICOMMAND_WRITE); - for (i=0; i < 5; i++) { + for (i = 0; i < 5; i++) { u32 stat = ethoc_read(priv, MIISTATUS); if (!(stat & MIISTATUS_BUSY)) { /* reset MII command register */ ethoc_write(priv, MIICOMMAND, 0); return 0; } - usleep_range(100,200); + usleep_range(100, 200); } return -EBUSY; @@ -671,11 +670,10 @@ static int ethoc_mdio_probe(struct net_device *dev) struct phy_device *phy; int err; - if (priv->phy_id != -1) { + if (priv->phy_id != -1) phy = priv->mdio->phy_map[priv->phy_id]; - } else { + else phy = phy_find_first(priv->mdio); - } if (!phy) { dev_err(&dev->dev, "no PHY found\n"); @@ -1025,7 +1023,7 @@ static int ethoc_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "ethoc: num_tx: %d num_rx: %d\n", priv->num_tx, priv->num_rx); - priv->vma = devm_kzalloc(&pdev->dev, num_bd*sizeof(void*), GFP_KERNEL); + priv->vma = devm_kzalloc(&pdev->dev, num_bd*sizeof(void *), GFP_KERNEL); if (!priv->vma) { ret = -ENOMEM; goto error; @@ -1041,7 +1039,7 @@ static int ethoc_probe(struct platform_device *pdev) #ifdef CONFIG_OF { - const uint8_t* mac; + const uint8_t *mac; mac = of_get_property(pdev->dev.of_node, "local-mac-address", @@ -1053,12 +1051,14 @@ static int ethoc_probe(struct platform_device *pdev) } /* Check that the given MAC address is valid. If it isn't, read the - * current MAC from the controller. */ + * current MAC from the controller. + */ if (!is_valid_ether_addr(netdev->dev_addr)) ethoc_get_mac_address(netdev, netdev->dev_addr); /* Check the MAC again for validity, if it still isn't choose and - * program a random one. */ + * program a random one. + */ if (!is_valid_ether_addr(netdev->dev_addr)) { eth_random_addr(netdev->dev_addr); random_mac = true; -- cgit v0.10.2 From dc975382d2ef36be7e78fac3717927de1a5abcd8 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 28 Jan 2013 18:31:42 +0000 Subject: net: fec: add napi support to improve proformance Add napi support Before this patch iperf -s -i 1 ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.138 port 50004 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 41.2 MBytes 345 Mbits/sec [ 4] 1.0- 2.0 sec 43.7 MBytes 367 Mbits/sec [ 4] 2.0- 3.0 sec 42.8 MBytes 359 Mbits/sec [ 4] 3.0- 4.0 sec 43.7 MBytes 367 Mbits/sec [ 4] 4.0- 5.0 sec 42.7 MBytes 359 Mbits/sec [ 4] 5.0- 6.0 sec 43.8 MBytes 367 Mbits/sec [ 4] 6.0- 7.0 sec 43.0 MBytes 361 Mbits/sec After this patch [ 4] 2.0- 3.0 sec 51.6 MBytes 433 Mbits/sec [ 4] 3.0- 4.0 sec 51.8 MBytes 435 Mbits/sec [ 4] 4.0- 5.0 sec 52.2 MBytes 438 Mbits/sec [ 4] 5.0- 6.0 sec 52.1 MBytes 437 Mbits/sec [ 4] 6.0- 7.0 sec 52.1 MBytes 437 Mbits/sec [ 4] 7.0- 8.0 sec 52.3 MBytes 439 Mbits/sec Signed-off-by: Frank Li Signed-off-by: Fugang Duan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index f52ba33..0287675 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -67,6 +67,7 @@ #endif #define DRIVER_NAME "fec" +#define FEC_NAPI_WEIGHT 64 /* Pause frame feild and FIFO threshold */ #define FEC_ENET_FCE (1 << 5) @@ -168,6 +169,7 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); #define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ #define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII) +#define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF)) /* The FEC stores dest/src/type, data, and checksum for receive packets. */ @@ -656,8 +658,8 @@ fec_enet_tx(struct net_device *ndev) * not been given to the system, we just set the empty indicator, * effectively tossing the packet. */ -static void -fec_enet_rx(struct net_device *ndev) +static int +fec_enet_rx(struct net_device *ndev, int budget) { struct fec_enet_private *fep = netdev_priv(ndev); const struct platform_device_id *id_entry = @@ -667,13 +669,12 @@ fec_enet_rx(struct net_device *ndev) struct sk_buff *skb; ushort pkt_len; __u8 *data; + int pkt_received = 0; #ifdef CONFIG_M532x flush_cache_all(); #endif - spin_lock(&fep->hw_lock); - /* First, grab all of the stats for the incoming packet. * These get messed up if we get called due to a busy condition. */ @@ -681,6 +682,10 @@ fec_enet_rx(struct net_device *ndev) while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { + if (pkt_received >= budget) + break; + pkt_received++; + /* Since we have allocated space to hold a complete frame, * the last indicator should be set. */ @@ -762,7 +767,7 @@ fec_enet_rx(struct net_device *ndev) } if (!skb_defer_rx_timestamp(skb)) - netif_rx(skb); + napi_gro_receive(&fep->napi, skb); } bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, data, @@ -796,7 +801,7 @@ rx_processing_done: } fep->cur_rx = bdp; - spin_unlock(&fep->hw_lock); + return pkt_received; } static irqreturn_t @@ -813,7 +818,13 @@ fec_enet_interrupt(int irq, void *dev_id) if (int_events & FEC_ENET_RXF) { ret = IRQ_HANDLED; - fec_enet_rx(ndev); + + /* Disable the RX interrupt */ + if (napi_schedule_prep(&fep->napi)) { + writel(FEC_RX_DISABLED_IMASK, + fep->hwp + FEC_IMASK); + __napi_schedule(&fep->napi); + } } /* Transmit OK, or non-fatal error. Update the buffer @@ -834,7 +845,18 @@ fec_enet_interrupt(int irq, void *dev_id) return ret; } +static int fec_enet_rx_napi(struct napi_struct *napi, int budget) +{ + struct net_device *ndev = napi->dev; + int pkts = fec_enet_rx(ndev, budget); + struct fec_enet_private *fep = netdev_priv(ndev); + if (pkts < budget) { + napi_complete(napi); + writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); + } + return pkts; +} /* ------------------------------------------------------------------------- */ static void fec_get_mac(struct net_device *ndev) @@ -1392,6 +1414,8 @@ fec_enet_open(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); int ret; + napi_enable(&fep->napi); + /* I should reset the ring buffers here, but I don't yet know * a simple way to do that. */ @@ -1604,6 +1628,9 @@ static int fec_enet_init(struct net_device *ndev) ndev->netdev_ops = &fec_netdev_ops; ndev->ethtool_ops = &fec_enet_ethtool_ops; + writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); + netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); + /* Initialize the receive buffer descriptors. */ bdp = fep->rx_bd_base; for (i = 0; i < RX_RING_SIZE; i++) { diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 2ebedaf..01579b8 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -249,6 +249,8 @@ struct fec_enet_private { int bufdesc_ex; int pause_flag; + struct napi_struct napi; + struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_caps; unsigned long last_overflow_check; -- cgit v0.10.2 From 3b144658bc7be5f7fa68d13ba24afb4c24489965 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Sat, 26 Jan 2013 16:39:55 -0800 Subject: mac80211: dynamic short slot time for MBSSs The standard mandates mesh STAs to set the ERP Short Slot Time capability info bit in beacons to 0. Even though this is their way of disallowing short slot time for mesh STAs, there should be no harm in enabling it if we determine all STAs in the current MBSS support ERP rates. Increases throughput about 20% for legacy rates when enabled. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 694e273..f920da1 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -629,11 +629,6 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); - if (band == IEEE80211_BAND_5GHZ) { - sdata->vif.bss_conf.use_short_slot = true; - changed |= BSS_CHANGED_ERP_SLOT; - } - ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 81e6126..6787d69 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -55,6 +55,66 @@ static inline void mesh_plink_fsm_restart(struct sta_info *sta) sta->plink_retries = 0; } +/* + * mesh_set_short_slot_time - enable / disable ERP short slot time. + * + * The standard indirectly mandates mesh STAs to turn off short slot time by + * disallowing advertising this (802.11-2012 8.4.1.4), but that doesn't mean we + * can't be sneaky about it. Enable short slot time if all mesh STAs in the + * MBSS support ERP rates. + * + * Returns BSS_CHANGED_ERP_SLOT or 0 for no change. + */ +static u32 mesh_set_short_slot_time(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + enum ieee80211_band band = ieee80211_get_sdata_band(sdata); + struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; + struct sta_info *sta; + u32 erp_rates = 0, changed = 0; + int i; + bool short_slot = false; + + if (band == IEEE80211_BAND_5GHZ) { + /* (IEEE 802.11-2012 19.4.5) */ + short_slot = true; + goto out; + } else if (band != IEEE80211_BAND_2GHZ || + (band == IEEE80211_BAND_2GHZ && + local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) + goto out; + + for (i = 0; i < sband->n_bitrates; i++) + if (sband->bitrates[i].flags & IEEE80211_RATE_ERP_G) + erp_rates |= BIT(i); + + if (!erp_rates) + goto out; + + rcu_read_lock(); + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sdata != sta->sdata || + sta->plink_state != NL80211_PLINK_ESTAB) + continue; + + short_slot = false; + if (erp_rates & sta->sta.supp_rates[band]) + short_slot = true; + else + break; + } + rcu_read_unlock(); + +out: + if (sdata->vif.bss_conf.use_short_slot != short_slot) { + sdata->vif.bss_conf.use_short_slot = short_slot; + changed = BSS_CHANGED_ERP_SLOT; + mpl_dbg(sdata, "mesh_plink %pM: ERP short slot time %d\n", + sdata->vif.addr, short_slot); + } + return changed; +} + /** * mesh_set_ht_prot_mode - set correct HT protection mode * @@ -896,6 +956,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m spin_unlock_bh(&sta->lock); changed |= mesh_plink_inc_estab_count(sdata); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); break; @@ -931,6 +992,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m spin_unlock_bh(&sta->lock); changed |= mesh_plink_inc_estab_count(sdata); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); mesh_plink_frame_tx(sdata, @@ -954,6 +1016,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout); spin_unlock_bh(&sta->lock); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE, sta->sta.addr, llid, plid, reason); break; -- cgit v0.10.2 From 4e58a0275015e5c8988bda9cd0635e2ef405c985 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 28 Jan 2013 19:55:53 +0000 Subject: pktgen: support net namespace v3: make pktgen_threads list per-namespace v2: remove a useless check This patch add net namespace to pktgen, so that we can use pktgen in different namespaces. Cc: Eric W. Biederman Cc: David S. Miller Signed-off-by: Cong Wang Acked-by: "Eric W. Biederman" Signed-off-by: David S. Miller diff --git a/net/core/pktgen.c b/net/core/pktgen.c index b29dacf..7977695 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -164,6 +164,7 @@ #ifdef CONFIG_XFRM #include #endif +#include #include #include #include @@ -212,7 +213,6 @@ #define PKTGEN_MAGIC 0xbe9be955 #define PG_PROC_DIR "pktgen" #define PGCTRL "pgctrl" -static struct proc_dir_entry *pg_proc_dir; #define MAX_CFLOWS 65536 @@ -397,7 +397,15 @@ struct pktgen_hdr { __be32 tv_usec; }; -static bool pktgen_exiting __read_mostly; + +static int pg_net_id __read_mostly; + +struct pktgen_net { + struct net *net; + struct proc_dir_entry *proc_dir; + struct list_head pktgen_threads; + bool pktgen_exiting; +}; struct pktgen_thread { spinlock_t if_lock; /* for list of devices */ @@ -414,6 +422,7 @@ struct pktgen_thread { wait_queue_head_t queue; struct completion start_done; + struct pktgen_net *net; }; #define REMOVE 1 @@ -428,9 +437,9 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname); static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, const char *ifname, bool exact); static int pktgen_device_event(struct notifier_block *, unsigned long, void *); -static void pktgen_run_all_threads(void); -static void pktgen_reset_all_threads(void); -static void pktgen_stop_all_threads_ifs(void); +static void pktgen_run_all_threads(struct pktgen_net *pn); +static void pktgen_reset_all_threads(struct pktgen_net *pn); +static void pktgen_stop_all_threads_ifs(struct pktgen_net *pn); static void pktgen_stop(struct pktgen_thread *t); static void pktgen_clear_counters(struct pktgen_dev *pkt_dev); @@ -442,7 +451,6 @@ static int pg_clone_skb_d __read_mostly; static int debug __read_mostly; static DEFINE_MUTEX(pktgen_thread_lock); -static LIST_HEAD(pktgen_threads); static struct notifier_block pktgen_notifier_block = { .notifier_call = pktgen_device_event, @@ -464,6 +472,7 @@ static ssize_t pgctrl_write(struct file *file, const char __user *buf, { int err = 0; char data[128]; + struct pktgen_net *pn = net_generic(current->nsproxy->net_ns, pg_net_id); if (!capable(CAP_NET_ADMIN)) { err = -EPERM; @@ -480,13 +489,13 @@ static ssize_t pgctrl_write(struct file *file, const char __user *buf, data[count - 1] = 0; /* Make string */ if (!strcmp(data, "stop")) - pktgen_stop_all_threads_ifs(); + pktgen_stop_all_threads_ifs(pn); else if (!strcmp(data, "start")) - pktgen_run_all_threads(); + pktgen_run_all_threads(pn); else if (!strcmp(data, "reset")) - pktgen_reset_all_threads(); + pktgen_reset_all_threads(pn); else pr_warning("Unknown command: %s\n", data); @@ -1824,13 +1833,14 @@ static const struct file_operations pktgen_thread_fops = { }; /* Think find or remove for NN */ -static struct pktgen_dev *__pktgen_NN_threads(const char *ifname, int remove) +static struct pktgen_dev *__pktgen_NN_threads(const struct pktgen_net *pn, + const char *ifname, int remove) { struct pktgen_thread *t; struct pktgen_dev *pkt_dev = NULL; bool exact = (remove == FIND); - list_for_each_entry(t, &pktgen_threads, th_list) { + list_for_each_entry(t, &pn->pktgen_threads, th_list) { pkt_dev = pktgen_find_dev(t, ifname, exact); if (pkt_dev) { if (remove) { @@ -1848,7 +1858,7 @@ static struct pktgen_dev *__pktgen_NN_threads(const char *ifname, int remove) /* * mark a device for removal */ -static void pktgen_mark_device(const char *ifname) +static void pktgen_mark_device(const struct pktgen_net *pn, const char *ifname) { struct pktgen_dev *pkt_dev = NULL; const int max_tries = 10, msec_per_try = 125; @@ -1859,7 +1869,7 @@ static void pktgen_mark_device(const char *ifname) while (1) { - pkt_dev = __pktgen_NN_threads(ifname, REMOVE); + pkt_dev = __pktgen_NN_threads(pn, ifname, REMOVE); if (pkt_dev == NULL) break; /* success */ @@ -1880,21 +1890,21 @@ static void pktgen_mark_device(const char *ifname) mutex_unlock(&pktgen_thread_lock); } -static void pktgen_change_name(struct net_device *dev) +static void pktgen_change_name(const struct pktgen_net *pn, struct net_device *dev) { struct pktgen_thread *t; - list_for_each_entry(t, &pktgen_threads, th_list) { + list_for_each_entry(t, &pn->pktgen_threads, th_list) { struct pktgen_dev *pkt_dev; list_for_each_entry(pkt_dev, &t->if_list, list) { if (pkt_dev->odev != dev) continue; - remove_proc_entry(pkt_dev->entry->name, pg_proc_dir); + remove_proc_entry(pkt_dev->entry->name, pn->proc_dir); pkt_dev->entry = proc_create_data(dev->name, 0600, - pg_proc_dir, + pn->proc_dir, &pktgen_if_fops, pkt_dev); if (!pkt_dev->entry) @@ -1909,8 +1919,9 @@ static int pktgen_device_event(struct notifier_block *unused, unsigned long event, void *ptr) { struct net_device *dev = ptr; + struct pktgen_net *pn = net_generic(dev_net(dev), pg_net_id); - if (!net_eq(dev_net(dev), &init_net) || pktgen_exiting) + if (pn->pktgen_exiting) return NOTIFY_DONE; /* It is OK that we do not hold the group lock right now, @@ -1919,18 +1930,19 @@ static int pktgen_device_event(struct notifier_block *unused, switch (event) { case NETDEV_CHANGENAME: - pktgen_change_name(dev); + pktgen_change_name(pn, dev); break; case NETDEV_UNREGISTER: - pktgen_mark_device(dev->name); + pktgen_mark_device(pn, dev->name); break; } return NOTIFY_DONE; } -static struct net_device *pktgen_dev_get_by_name(struct pktgen_dev *pkt_dev, +static struct net_device *pktgen_dev_get_by_name(const struct pktgen_net *pn, + struct pktgen_dev *pkt_dev, const char *ifname) { char b[IFNAMSIZ+5]; @@ -1944,13 +1956,14 @@ static struct net_device *pktgen_dev_get_by_name(struct pktgen_dev *pkt_dev, } b[i] = 0; - return dev_get_by_name(&init_net, b); + return dev_get_by_name(pn->net, b); } /* Associate pktgen_dev with a device. */ -static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname) +static int pktgen_setup_dev(const struct pktgen_net *pn, + struct pktgen_dev *pkt_dev, const char *ifname) { struct net_device *odev; int err; @@ -1961,7 +1974,7 @@ static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname) pkt_dev->odev = NULL; } - odev = pktgen_dev_get_by_name(pkt_dev, ifname); + odev = pktgen_dev_get_by_name(pn, pkt_dev, ifname); if (!odev) { pr_err("no such netdevice: \"%s\"\n", ifname); return -ENODEV; @@ -2203,9 +2216,10 @@ static inline int f_pick(struct pktgen_dev *pkt_dev) static void get_ipsec_sa(struct pktgen_dev *pkt_dev, int flow) { struct xfrm_state *x = pkt_dev->flows[flow].x; + struct pktgen_net *pn = net_generic(dev_net(pkt_dev->odev), pg_net_id); if (!x) { /*slow path: we dont already have xfrm_state*/ - x = xfrm_stateonly_find(&init_net, DUMMY_MARK, + x = xfrm_stateonly_find(pn->net, DUMMY_MARK, (xfrm_address_t *)&pkt_dev->cur_daddr, (xfrm_address_t *)&pkt_dev->cur_saddr, AF_INET, @@ -2912,7 +2926,7 @@ static void pktgen_run(struct pktgen_thread *t) t->control &= ~(T_STOP); } -static void pktgen_stop_all_threads_ifs(void) +static void pktgen_stop_all_threads_ifs(struct pktgen_net *pn) { struct pktgen_thread *t; @@ -2920,7 +2934,7 @@ static void pktgen_stop_all_threads_ifs(void) mutex_lock(&pktgen_thread_lock); - list_for_each_entry(t, &pktgen_threads, th_list) + list_for_each_entry(t, &pn->pktgen_threads, th_list) t->control |= T_STOP; mutex_unlock(&pktgen_thread_lock); @@ -2956,28 +2970,28 @@ signal: return 0; } -static int pktgen_wait_all_threads_run(void) +static int pktgen_wait_all_threads_run(struct pktgen_net *pn) { struct pktgen_thread *t; int sig = 1; mutex_lock(&pktgen_thread_lock); - list_for_each_entry(t, &pktgen_threads, th_list) { + list_for_each_entry(t, &pn->pktgen_threads, th_list) { sig = pktgen_wait_thread_run(t); if (sig == 0) break; } if (sig == 0) - list_for_each_entry(t, &pktgen_threads, th_list) + list_for_each_entry(t, &pn->pktgen_threads, th_list) t->control |= (T_STOP); mutex_unlock(&pktgen_thread_lock); return sig; } -static void pktgen_run_all_threads(void) +static void pktgen_run_all_threads(struct pktgen_net *pn) { struct pktgen_thread *t; @@ -2985,7 +2999,7 @@ static void pktgen_run_all_threads(void) mutex_lock(&pktgen_thread_lock); - list_for_each_entry(t, &pktgen_threads, th_list) + list_for_each_entry(t, &pn->pktgen_threads, th_list) t->control |= (T_RUN); mutex_unlock(&pktgen_thread_lock); @@ -2993,10 +3007,10 @@ static void pktgen_run_all_threads(void) /* Propagate thread->control */ schedule_timeout_interruptible(msecs_to_jiffies(125)); - pktgen_wait_all_threads_run(); + pktgen_wait_all_threads_run(pn); } -static void pktgen_reset_all_threads(void) +static void pktgen_reset_all_threads(struct pktgen_net *pn) { struct pktgen_thread *t; @@ -3004,7 +3018,7 @@ static void pktgen_reset_all_threads(void) mutex_lock(&pktgen_thread_lock); - list_for_each_entry(t, &pktgen_threads, th_list) + list_for_each_entry(t, &pn->pktgen_threads, th_list) t->control |= (T_REMDEVALL); mutex_unlock(&pktgen_thread_lock); @@ -3012,7 +3026,7 @@ static void pktgen_reset_all_threads(void) /* Propagate thread->control */ schedule_timeout_interruptible(msecs_to_jiffies(125)); - pktgen_wait_all_threads_run(); + pktgen_wait_all_threads_run(pn); } static void show_results(struct pktgen_dev *pkt_dev, int nr_frags) @@ -3154,9 +3168,7 @@ static void pktgen_rem_all_ifs(struct pktgen_thread *t) static void pktgen_rem_thread(struct pktgen_thread *t) { /* Remove from the thread list */ - - remove_proc_entry(t->tsk->comm, pg_proc_dir); - + remove_proc_entry(t->tsk->comm, t->net->proc_dir); } static void pktgen_resched(struct pktgen_dev *pkt_dev) @@ -3302,7 +3314,7 @@ static int pktgen_thread_worker(void *arg) pkt_dev = next_to_run(t); if (unlikely(!pkt_dev && t->control == 0)) { - if (pktgen_exiting) + if (t->net->pktgen_exiting) break; wait_event_interruptible_timeout(t->queue, t->control != 0, @@ -3424,7 +3436,7 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname) /* We don't allow a device to be on several threads */ - pkt_dev = __pktgen_NN_threads(ifname, FIND); + pkt_dev = __pktgen_NN_threads(t->net, ifname, FIND); if (pkt_dev) { pr_err("ERROR: interface already used\n"); return -EBUSY; @@ -3459,13 +3471,13 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname) pkt_dev->svlan_id = 0xffff; pkt_dev->node = -1; - err = pktgen_setup_dev(pkt_dev, ifname); + err = pktgen_setup_dev(t->net, pkt_dev, ifname); if (err) goto out1; if (pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING) pkt_dev->clone_skb = pg_clone_skb_d; - pkt_dev->entry = proc_create_data(ifname, 0600, pg_proc_dir, + pkt_dev->entry = proc_create_data(ifname, 0600, t->net->proc_dir, &pktgen_if_fops, pkt_dev); if (!pkt_dev->entry) { pr_err("cannot create %s/%s procfs entry\n", @@ -3490,7 +3502,7 @@ out1: return err; } -static int __init pktgen_create_thread(int cpu) +static int __net_init pktgen_create_thread(int cpu, struct pktgen_net *pn) { struct pktgen_thread *t; struct proc_dir_entry *pe; @@ -3508,7 +3520,7 @@ static int __init pktgen_create_thread(int cpu) INIT_LIST_HEAD(&t->if_list); - list_add_tail(&t->th_list, &pktgen_threads); + list_add_tail(&t->th_list, &pn->pktgen_threads); init_completion(&t->start_done); p = kthread_create_on_node(pktgen_thread_worker, @@ -3524,7 +3536,7 @@ static int __init pktgen_create_thread(int cpu) kthread_bind(p, cpu); t->tsk = p; - pe = proc_create_data(t->tsk->comm, 0600, pg_proc_dir, + pe = proc_create_data(t->tsk->comm, 0600, pn->proc_dir, &pktgen_thread_fops, t); if (!pe) { pr_err("cannot create %s/%s procfs entry\n", @@ -3535,6 +3547,7 @@ static int __init pktgen_create_thread(int cpu) return -EINVAL; } + t->net = pn; wake_up_process(p); wait_for_completion(&t->start_done); @@ -3560,6 +3573,7 @@ static void _rem_dev_from_if_list(struct pktgen_thread *t, static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *pkt_dev) { + struct pktgen_net *pn = t->net; pr_debug("remove_device pkt_dev=%p\n", pkt_dev); @@ -3580,7 +3594,7 @@ static int pktgen_remove_device(struct pktgen_thread *t, _rem_dev_from_if_list(t, pkt_dev); if (pkt_dev->entry) - remove_proc_entry(pkt_dev->entry->name, pg_proc_dir); + remove_proc_entry(pkt_dev->entry->name, pn->proc_dir); #ifdef CONFIG_XFRM free_SAs(pkt_dev); @@ -3592,63 +3606,63 @@ static int pktgen_remove_device(struct pktgen_thread *t, return 0; } -static int __init pg_init(void) +static int __net_init pg_net_init(struct net *net) { - int cpu; + struct pktgen_net *pn = net_generic(net, pg_net_id); struct proc_dir_entry *pe; - int ret = 0; - - pr_info("%s", version); - - pg_proc_dir = proc_mkdir(PG_PROC_DIR, init_net.proc_net); - if (!pg_proc_dir) + int cpu, ret = 0; + + pn->net = net; + INIT_LIST_HEAD(&pn->pktgen_threads); + pn->pktgen_exiting = false; + pn->proc_dir = proc_mkdir(PG_PROC_DIR, pn->net->proc_net); + if (!pn->proc_dir) { + pr_warn("cannot create /proc/net/%s\n", PG_PROC_DIR); return -ENODEV; - - pe = proc_create(PGCTRL, 0600, pg_proc_dir, &pktgen_fops); + } + pe = proc_create(PGCTRL, 0600, pn->proc_dir, &pktgen_fops); if (pe == NULL) { - pr_err("ERROR: cannot create %s procfs entry\n", PGCTRL); + pr_err("cannot create %s procfs entry\n", PGCTRL); ret = -EINVAL; - goto remove_dir; + goto remove; } - register_netdevice_notifier(&pktgen_notifier_block); - for_each_online_cpu(cpu) { int err; - err = pktgen_create_thread(cpu); + err = pktgen_create_thread(cpu, pn); if (err) - pr_warning("WARNING: Cannot create thread for cpu %d (%d)\n", + pr_warn("Cannot create thread for cpu %d (%d)\n", cpu, err); } - if (list_empty(&pktgen_threads)) { - pr_err("ERROR: Initialization failed for all threads\n"); + if (list_empty(&pn->pktgen_threads)) { + pr_err("Initialization failed for all threads\n"); ret = -ENODEV; - goto unregister; + goto remove_entry; } return 0; - unregister: - unregister_netdevice_notifier(&pktgen_notifier_block); - remove_proc_entry(PGCTRL, pg_proc_dir); - remove_dir: - proc_net_remove(&init_net, PG_PROC_DIR); +remove_entry: + remove_proc_entry(PGCTRL, pn->proc_dir); +remove: + proc_net_remove(pn->net, PG_PROC_DIR); return ret; } -static void __exit pg_cleanup(void) +static void __net_exit pg_net_exit(struct net *net) { + struct pktgen_net *pn = net_generic(net, pg_net_id); struct pktgen_thread *t; struct list_head *q, *n; LIST_HEAD(list); /* Stop all interfaces & threads */ - pktgen_exiting = true; + pn->pktgen_exiting = true; mutex_lock(&pktgen_thread_lock); - list_splice_init(&pktgen_threads, &list); + list_splice_init(&pn->pktgen_threads, &list); mutex_unlock(&pktgen_thread_lock); list_for_each_safe(q, n, &list) { @@ -3658,12 +3672,36 @@ static void __exit pg_cleanup(void) kfree(t); } - /* Un-register us from receiving netdevice events */ - unregister_netdevice_notifier(&pktgen_notifier_block); + remove_proc_entry(PGCTRL, pn->proc_dir); + proc_net_remove(pn->net, PG_PROC_DIR); +} + +static struct pernet_operations pg_net_ops = { + .init = pg_net_init, + .exit = pg_net_exit, + .id = &pg_net_id, + .size = sizeof(struct pktgen_net), +}; + +static int __init pg_init(void) +{ + int ret = 0; - /* Clean up proc file system */ - remove_proc_entry(PGCTRL, pg_proc_dir); - proc_net_remove(&init_net, PG_PROC_DIR); + pr_info("%s", version); + ret = register_pernet_subsys(&pg_net_ops); + if (ret) + return ret; + ret = register_netdevice_notifier(&pktgen_notifier_block); + if (ret) + unregister_pernet_subsys(&pg_net_ops); + + return ret; +} + +static void __exit pg_cleanup(void) +{ + unregister_netdevice_notifier(&pktgen_notifier_block); + unregister_pernet_subsys(&pg_net_ops); } module_init(pg_init); -- cgit v0.10.2 From 243bb4c6d731f886ac7a99b986e46625f0d5ba07 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 29 Jan 2013 02:16:18 +0000 Subject: ipv6: Fix inet6_csk_bind_conflict so it builds with user namespaces enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When attempting to build linux-next with user namespaces enabled I ran into this fun build error. CC net/ipv6/inet6_connection_sock.o .../net/ipv6/inet6_connection_sock.c: In function ‘inet6_csk_bind_conflict’: .../net/ipv6/inet6_connection_sock.c:37:12: error: incompatible types when initializing type ‘int’ using type ‘kuid_t’ .../net/ipv6/inet6_connection_sock.c:54:30: error: incompatible type for argument 1 of ‘uid_eq’ .../include/linux/uidgid.h:48:20: note: expected ‘kuid_t’ but argument is of type ‘int’ make[3]: *** [net/ipv6/inet6_connection_sock.o] Error 1 make[2]: *** [net/ipv6] Error 2 make[2]: *** Waiting for unfinished jobs.... Using kuid_t instead of int to hold the uid fixes this. Cc: Tom Herbert Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index e4297a3..b386a2c 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -34,7 +34,7 @@ int inet6_csk_bind_conflict(const struct sock *sk, const struct hlist_node *node; int reuse = sk->sk_reuse; int reuseport = sk->sk_reuseport; - int uid = sock_i_uid((struct sock *)sk); + kuid_t uid = sock_i_uid((struct sock *)sk); /* We must walk the whole port owner list in this case. -DaveM */ /* -- cgit v0.10.2 From 0cd3fdea07d8e0f0f5bac7534892b785af37e387 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Tue, 29 Jan 2013 03:55:10 +0000 Subject: gianfar: Optimize struct gfar_priv_tx_q for two cache lines Resize and regroup structure members to eliminate memory holes and to pack the structure into 2 cache lines (from 3). tx_ring_size was resized from 4 to 2 bytes and few members were re-grouped in order to eliminate byte holes and achieve compactness. Where possible, few members were grouped according to their usage and access order (i.e. start_xmit vs. clean_tx_ring members), less important members were pushed at the end. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 91bb2de..045c0d2 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -935,26 +935,25 @@ struct tx_q_stats { * @txtime: coalescing value if based on time */ struct gfar_priv_tx_q { + /* cacheline 1 */ spinlock_t txlock __attribute__ ((aligned (SMP_CACHE_BYTES))); - struct sk_buff ** tx_skbuff; - /* Buffer descriptor pointers */ - dma_addr_t tx_bd_dma_base; struct txbd8 *tx_bd_base; struct txbd8 *cur_tx; - struct txbd8 *dirty_tx; + unsigned int num_txbdfree; + unsigned short skb_curtx; + unsigned short tx_ring_size; struct tx_q_stats stats; - struct net_device *dev; struct gfar_priv_grp *grp; - u16 skb_curtx; - u16 skb_dirtytx; - u16 qindex; - unsigned int tx_ring_size; - unsigned int num_txbdfree; + /* cacheline 2 */ + struct net_device *dev; + struct sk_buff **tx_skbuff; + struct txbd8 *dirty_tx; + unsigned short skb_dirtytx; + unsigned short qindex; /* Configuration info for the coalescing features */ - unsigned char txcoalescing; + unsigned int txcoalescing; unsigned long txic; - unsigned short txcount; - unsigned short txtime; + dma_addr_t tx_bd_dma_base; }; /* -- cgit v0.10.2 From 5fedcc14d40e355f966d46e6b19c209e2b36fd5b Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Tue, 29 Jan 2013 03:55:11 +0000 Subject: gianfar: Cleanup gfar_parse_group() code Factor out redundant code (improve readability, source code size). Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index e765b9b..fdb8080 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -563,40 +563,38 @@ static void enable_napi(struct gfar_private *priv) static int gfar_parse_group(struct device_node *np, struct gfar_private *priv, const char *model) { + struct gfar_priv_grp *grp = &priv->gfargrp[priv->num_grps]; u32 *queue_mask; - priv->gfargrp[priv->num_grps].regs = of_iomap(np, 0); - if (!priv->gfargrp[priv->num_grps].regs) + grp->regs = of_iomap(np, 0); + if (!grp->regs) return -ENOMEM; - priv->gfargrp[priv->num_grps].interruptTransmit = - irq_of_parse_and_map(np, 0); + grp->interruptTransmit = irq_of_parse_and_map(np, 0); /* If we aren't the FEC we have multiple interrupts */ if (model && strcasecmp(model, "FEC")) { - priv->gfargrp[priv->num_grps].interruptReceive = - irq_of_parse_and_map(np, 1); - priv->gfargrp[priv->num_grps].interruptError = - irq_of_parse_and_map(np,2); - if (priv->gfargrp[priv->num_grps].interruptTransmit == NO_IRQ || - priv->gfargrp[priv->num_grps].interruptReceive == NO_IRQ || - priv->gfargrp[priv->num_grps].interruptError == NO_IRQ) + grp->interruptReceive = irq_of_parse_and_map(np, 1); + grp->interruptError = irq_of_parse_and_map(np, 2); + if (grp->interruptTransmit == NO_IRQ || + grp->interruptReceive == NO_IRQ || + grp->interruptError == NO_IRQ) return -EINVAL; } - priv->gfargrp[priv->num_grps].grp_id = priv->num_grps; - priv->gfargrp[priv->num_grps].priv = priv; - spin_lock_init(&priv->gfargrp[priv->num_grps].grplock); + grp->grp_id = priv->num_grps; + grp->priv = priv; + spin_lock_init(&grp->grplock); if (priv->mode == MQ_MG_MODE) { queue_mask = (u32 *)of_get_property(np, "fsl,rx-bit-map", NULL); - priv->gfargrp[priv->num_grps].rx_bit_map = queue_mask ? + grp->rx_bit_map = queue_mask ? *queue_mask : (DEFAULT_MAPPING >> priv->num_grps); queue_mask = (u32 *)of_get_property(np, "fsl,tx-bit-map", NULL); - priv->gfargrp[priv->num_grps].tx_bit_map = queue_mask ? + grp->tx_bit_map = queue_mask ? *queue_mask : (DEFAULT_MAPPING >> priv->num_grps); } else { - priv->gfargrp[priv->num_grps].rx_bit_map = 0xFF; - priv->gfargrp[priv->num_grps].tx_bit_map = 0xFF; + grp->rx_bit_map = 0xFF; + grp->tx_bit_map = 0xFF; } priv->num_grps++; -- cgit v0.10.2 From ee873fda3bec7c668407b837fc5519eb961fcd37 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Tue, 29 Jan 2013 03:55:12 +0000 Subject: gianfar: Pack struct gfar_priv_grp into three cachelines * remove unused members(!): imask, ievent * move space consuming interrupt name strings (int_name_* members) to external structures, unessential for the driver's hot path * keep high priority hot path data within the first 2 cache lines This reduces struct gfar_priv_grp from 6 to 3 cache lines. (Also fixed checkpatch warnings for the old code, in the process.) Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index fdb8080..19c54a0 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -544,6 +544,19 @@ static void unmap_group_regs(struct gfar_private *priv) iounmap(priv->gfargrp[i].regs); } +static void free_gfar_dev(struct gfar_private *priv) +{ + int i, j; + + for (i = 0; i < priv->num_grps; i++) + for (j = 0; j < GFAR_NUM_IRQS; j++) { + kfree(priv->gfargrp[i].irqinfo[j]); + priv->gfargrp[i].irqinfo[j] = NULL; + } + + free_netdev(priv->ndev); +} + static void disable_napi(struct gfar_private *priv) { int i; @@ -565,20 +578,36 @@ static int gfar_parse_group(struct device_node *np, { struct gfar_priv_grp *grp = &priv->gfargrp[priv->num_grps]; u32 *queue_mask; + int i; + + if (priv->mode == MQ_MG_MODE) { + for (i = 0; i < GFAR_NUM_IRQS; i++) { + grp->irqinfo[i] = kzalloc(sizeof(struct gfar_irqinfo), + GFP_KERNEL); + if (!grp->irqinfo[i]) + return -ENOMEM; + } + } else { + grp->irqinfo[GFAR_TX] = kzalloc(sizeof(struct gfar_irqinfo), + GFP_KERNEL); + if (!grp->irqinfo[GFAR_TX]) + return -ENOMEM; + grp->irqinfo[GFAR_RX] = grp->irqinfo[GFAR_ER] = NULL; + } grp->regs = of_iomap(np, 0); if (!grp->regs) return -ENOMEM; - grp->interruptTransmit = irq_of_parse_and_map(np, 0); + gfar_irq(grp, TX)->irq = irq_of_parse_and_map(np, 0); /* If we aren't the FEC we have multiple interrupts */ if (model && strcasecmp(model, "FEC")) { - grp->interruptReceive = irq_of_parse_and_map(np, 1); - grp->interruptError = irq_of_parse_and_map(np, 2); - if (grp->interruptTransmit == NO_IRQ || - grp->interruptReceive == NO_IRQ || - grp->interruptError == NO_IRQ) + gfar_irq(grp, RX)->irq = irq_of_parse_and_map(np, 1); + gfar_irq(grp, ER)->irq = irq_of_parse_and_map(np, 2); + if (gfar_irq(grp, TX)->irq == NO_IRQ || + gfar_irq(grp, RX)->irq == NO_IRQ || + gfar_irq(grp, ER)->irq == NO_IRQ) return -EINVAL; } @@ -779,7 +808,7 @@ tx_alloc_failed: free_tx_pointers(priv); err_grp_init: unmap_group_regs(priv); - free_netdev(dev); + free_gfar_dev(priv); return err; } @@ -1184,15 +1213,16 @@ static int gfar_probe(struct platform_device *ofdev) /* fill out IRQ number and name fields */ for (i = 0; i < priv->num_grps; i++) { + struct gfar_priv_grp *grp = &priv->gfargrp[i]; if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { - sprintf(priv->gfargrp[i].int_name_tx, "%s%s%c%s", + sprintf(gfar_irq(grp, TX)->name, "%s%s%c%s", dev->name, "_g", '0' + i, "_tx"); - sprintf(priv->gfargrp[i].int_name_rx, "%s%s%c%s", + sprintf(gfar_irq(grp, RX)->name, "%s%s%c%s", dev->name, "_g", '0' + i, "_rx"); - sprintf(priv->gfargrp[i].int_name_er, "%s%s%c%s", + sprintf(gfar_irq(grp, ER)->name, "%s%s%c%s", dev->name, "_g", '0' + i, "_er"); } else - strcpy(priv->gfargrp[i].int_name_tx, dev->name); + strcpy(gfar_irq(grp, TX)->name, dev->name); } /* Initialize the filer table */ @@ -1225,7 +1255,7 @@ register_fail: of_node_put(priv->phy_node); if (priv->tbi_node) of_node_put(priv->tbi_node); - free_netdev(dev); + free_gfar_dev(priv); return err; } @@ -1242,7 +1272,7 @@ static int gfar_remove(struct platform_device *ofdev) unregister_netdev(priv->ndev); unmap_group_regs(priv); - free_netdev(priv->ndev); + free_gfar_dev(priv); return 0; } @@ -1650,9 +1680,9 @@ void gfar_halt(struct net_device *dev) static void free_grp_irqs(struct gfar_priv_grp *grp) { - free_irq(grp->interruptError, grp); - free_irq(grp->interruptTransmit, grp); - free_irq(grp->interruptReceive, grp); + free_irq(gfar_irq(grp, TX)->irq, grp); + free_irq(gfar_irq(grp, RX)->irq, grp); + free_irq(gfar_irq(grp, ER)->irq, grp); } void stop_gfar(struct net_device *dev) @@ -1681,7 +1711,7 @@ void stop_gfar(struct net_device *dev) free_grp_irqs(&priv->gfargrp[i]); } else { for (i = 0; i < priv->num_grps; i++) - free_irq(priv->gfargrp[i].interruptTransmit, + free_irq(gfar_irq(&priv->gfargrp[i], TX)->irq, &priv->gfargrp[i]); } @@ -1856,32 +1886,34 @@ static int register_grp_irqs(struct gfar_priv_grp *grp) /* Install our interrupt handlers for Error, * Transmit, and Receive */ - if ((err = request_irq(grp->interruptError, gfar_error, - 0, grp->int_name_er, grp)) < 0) { + err = request_irq(gfar_irq(grp, ER)->irq, gfar_error, 0, + gfar_irq(grp, ER)->name, grp); + if (err < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", - grp->interruptError); + gfar_irq(grp, ER)->irq); goto err_irq_fail; } - - if ((err = request_irq(grp->interruptTransmit, gfar_transmit, - 0, grp->int_name_tx, grp)) < 0) { + err = request_irq(gfar_irq(grp, TX)->irq, gfar_transmit, 0, + gfar_irq(grp, TX)->name, grp); + if (err < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", - grp->interruptTransmit); + gfar_irq(grp, TX)->irq); goto tx_irq_fail; } - - if ((err = request_irq(grp->interruptReceive, gfar_receive, - 0, grp->int_name_rx, grp)) < 0) { + err = request_irq(gfar_irq(grp, RX)->irq, gfar_receive, 0, + gfar_irq(grp, RX)->name, grp); + if (err < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", - grp->interruptReceive); + gfar_irq(grp, RX)->irq); goto rx_irq_fail; } } else { - if ((err = request_irq(grp->interruptTransmit, gfar_interrupt, - 0, grp->int_name_tx, grp)) < 0) { + err = request_irq(gfar_irq(grp, TX)->irq, gfar_interrupt, 0, + gfar_irq(grp, TX)->name, grp); + if (err < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", - grp->interruptTransmit); + gfar_irq(grp, TX)->irq); goto err_irq_fail; } } @@ -1889,9 +1921,9 @@ static int register_grp_irqs(struct gfar_priv_grp *grp) return 0; rx_irq_fail: - free_irq(grp->interruptTransmit, grp); + free_irq(gfar_irq(grp, TX)->irq, grp); tx_irq_fail: - free_irq(grp->interruptError, grp); + free_irq(gfar_irq(grp, ER)->irq, grp); err_irq_fail: return err; diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 045c0d2..71793f4 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -996,18 +996,25 @@ struct gfar_priv_rx_q { unsigned long rxic; }; +enum gfar_irqinfo_id { + GFAR_TX = 0, + GFAR_RX = 1, + GFAR_ER = 2, + GFAR_NUM_IRQS = 3 +}; + +struct gfar_irqinfo { + unsigned int irq; + char name[GFAR_INT_NAME_MAX]; +}; + /** * struct gfar_priv_grp - per group structure * @napi: the napi poll function * @priv: back pointer to the priv structure * @regs: the ioremapped register space for this group * @grp_id: group id for this group - * @interruptTransmit: The TX interrupt number for this group - * @interruptReceive: The RX interrupt number for this group - * @interruptError: The ERROR interrupt number for this group - * @int_name_tx: tx interrupt name for this group - * @int_name_rx: rx interrupt name for this group - * @int_name_er: er interrupt name for this group + * @irqinfo: TX/RX/ER irq data for this group */ struct gfar_priv_grp { @@ -1016,23 +1023,20 @@ struct gfar_priv_grp { struct gfar_private *priv; struct gfar __iomem *regs; unsigned int grp_id; - unsigned long rx_bit_map; - unsigned long tx_bit_map; - unsigned long num_tx_queues; unsigned long num_rx_queues; + unsigned long rx_bit_map; + /* cacheline 3 */ unsigned int rstat; unsigned int tstat; - unsigned int imask; - unsigned int ievent; - unsigned int interruptTransmit; - unsigned int interruptReceive; - unsigned int interruptError; - - char int_name_tx[GFAR_INT_NAME_MAX]; - char int_name_rx[GFAR_INT_NAME_MAX]; - char int_name_er[GFAR_INT_NAME_MAX]; + unsigned long num_tx_queues; + unsigned long tx_bit_map; + + struct gfar_irqinfo *irqinfo[GFAR_NUM_IRQS]; }; +#define gfar_irq(grp, ID) \ + ((grp)->irqinfo[GFAR_##ID]) + enum gfar_errata { GFAR_ERRATA_74 = 0x01, GFAR_ERRATA_76 = 0x02, -- cgit v0.10.2 From 218774dc341f219bfcf940304a081b121a0e8099 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Tue, 29 Jan 2013 08:24:25 +0000 Subject: ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki Cc: David Miller Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 98fe536..02f96dc 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -72,6 +72,8 @@ MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN"); static int ipip6_tunnel_init(struct net_device *dev); static void ipip6_tunnel_setup(struct net_device *dev); static void ipip6_dev_free(struct net_device *dev); +static bool check_6rd(struct ip_tunnel *tunnel, const struct in6_addr *v6dst, + __be32 *v4dst); static struct rtnl_link_ops sit_link_ops __read_mostly; static int sit_net_id __read_mostly; @@ -590,6 +592,15 @@ out: return err; } +static inline bool is_spoofed_6rd(struct ip_tunnel *tunnel, const __be32 v4addr, + const struct in6_addr *v6addr) +{ + __be32 v4embed = 0; + if (check_6rd(tunnel, v6addr, &v4embed) && v4addr != v4embed) + return true; + return false; +} + static int ipip6_rcv(struct sk_buff *skb) { const struct iphdr *iph = ip_hdr(skb); @@ -608,10 +619,19 @@ static int ipip6_rcv(struct sk_buff *skb) skb->protocol = htons(ETH_P_IPV6); skb->pkt_type = PACKET_HOST; - if ((tunnel->dev->priv_flags & IFF_ISATAP) && - !isatap_chksrc(skb, iph, tunnel)) { - tunnel->dev->stats.rx_errors++; - goto out; + if (tunnel->dev->priv_flags & IFF_ISATAP) { + if (!isatap_chksrc(skb, iph, tunnel)) { + tunnel->dev->stats.rx_errors++; + goto out; + } + } else { + if (is_spoofed_6rd(tunnel, iph->saddr, + &ipv6_hdr(skb)->saddr) || + is_spoofed_6rd(tunnel, iph->daddr, + &ipv6_hdr(skb)->daddr)) { + tunnel->dev->stats.rx_errors++; + goto out; + } } __skb_tunnel_rx(skb, tunnel->dev); @@ -645,14 +665,12 @@ out: } /* - * Returns the embedded IPv4 address if the IPv6 address - * comes from 6rd / 6to4 (RFC 3056) addr space. + * If the IPv6 address comes from 6rd / 6to4 (RFC 3056) addr space this function + * stores the embedded IPv4 address in v4dst and returns true. */ -static inline -__be32 try_6rd(const struct in6_addr *v6dst, struct ip_tunnel *tunnel) +static bool check_6rd(struct ip_tunnel *tunnel, const struct in6_addr *v6dst, + __be32 *v4dst) { - __be32 dst = 0; - #ifdef CONFIG_IPV6_SIT_6RD if (ipv6_prefix_equal(v6dst, &tunnel->ip6rd.prefix, tunnel->ip6rd.prefixlen)) { @@ -671,14 +689,24 @@ __be32 try_6rd(const struct in6_addr *v6dst, struct ip_tunnel *tunnel) d |= ntohl(v6dst->s6_addr32[pbw0 + 1]) >> (32 - pbi1); - dst = tunnel->ip6rd.relay_prefix | htonl(d); + *v4dst = tunnel->ip6rd.relay_prefix | htonl(d); + return true; } #else if (v6dst->s6_addr16[0] == htons(0x2002)) { /* 6to4 v6 addr has 16 bits prefix, 32 v4addr, 16 SLA, ... */ - memcpy(&dst, &v6dst->s6_addr16[1], 4); + memcpy(v4dst, &v6dst->s6_addr16[1], 4); + return true; } #endif + return false; +} + +static inline __be32 try_6rd(struct ip_tunnel *tunnel, + const struct in6_addr *v6dst) +{ + __be32 dst = 0; + check_6rd(tunnel, v6dst, &dst); return dst; } @@ -739,7 +767,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, } if (!dst) - dst = try_6rd(&iph6->daddr, tunnel); + dst = try_6rd(tunnel, &iph6->daddr); if (!dst) { struct neighbour *neigh = NULL; -- cgit v0.10.2 From 07c2fecc363c8f94a0bd2fdf9b7209ec6f5a0ab5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 29 Jan 2013 12:48:23 +0000 Subject: ipv6 mcast: Use ipv6_addr_equal() in ip6_mc_source(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index f25002a..8460a1f 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -376,8 +376,7 @@ int ip6_mc_source(int add, int omode, struct sock *sk, goto done; /* err = -EADDRNOTAVAIL */ rv = !0; for (i=0; isl_count; i++) { - rv = memcmp(&psl->sl_addr[i], source, - sizeof(struct in6_addr)); + rv = !ipv6_addr_equal(&psl->sl_addr[i], source); if (rv == 0) break; } @@ -427,7 +426,7 @@ int ip6_mc_source(int add, int omode, struct sock *sk, } rv = 1; /* > 0 for insert logic below if sl_count is 0 */ for (i=0; isl_count; i++) { - rv = memcmp(&psl->sl_addr[i], source, sizeof(struct in6_addr)); + rv = !ipv6_addr_equal(&psl->sl_addr[i], source); if (rv == 0) break; } -- cgit v0.10.2 From ff88b30c717f21dffba6784cae4d3287da16f6ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 29 Jan 2013 12:48:31 +0000 Subject: xfrm: Use ipv6_addr_equal() where appropriate. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 421f764..0d8a797 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1032,7 +1032,7 @@ static inline int __xfrm6_state_addr_cmp(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x) { return (!ipv6_addr_any((struct in6_addr*)&tmpl->saddr) && - ipv6_addr_cmp((struct in6_addr *)&tmpl->saddr, (struct in6_addr*)&x->props.saddr)); + !ipv6_addr_equal((struct in6_addr *)&tmpl->saddr, (struct in6_addr*)&x->props.saddr)); } static inline int @@ -1243,8 +1243,8 @@ static __inline__ int __xfrm6_state_addr_check(const struct xfrm_state *x, const xfrm_address_t *daddr, const xfrm_address_t *saddr) { - if (!ipv6_addr_cmp((struct in6_addr *)daddr, (struct in6_addr *)&x->id.daddr) && - (!ipv6_addr_cmp((struct in6_addr *)saddr, (struct in6_addr *)&x->props.saddr)|| + if (ipv6_addr_equal((struct in6_addr *)daddr, (struct in6_addr *)&x->id.daddr) && + (ipv6_addr_equal((struct in6_addr *)saddr, (struct in6_addr *)&x->props.saddr) || ipv6_addr_any((struct in6_addr *)saddr) || ipv6_addr_any((struct in6_addr *)&x->props.saddr))) return 1; @@ -1588,6 +1588,13 @@ static inline int xfrm_addr_cmp(const xfrm_address_t *a, } } +static inline bool xfrm6_addr_equal(const xfrm_address_t *a, + const xfrm_address_t *b) +{ + return ipv6_addr_equal((const struct in6_addr *)a, + (const struct in6_addr *)b); +} + static inline int xfrm_policy_id2dir(u32 index) { return index & 7; diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c index babd167..6cc4801 100644 --- a/net/ipv6/xfrm6_tunnel.c +++ b/net/ipv6/xfrm6_tunnel.c @@ -94,7 +94,7 @@ static struct xfrm6_tunnel_spi *__xfrm6_tunnel_spi_lookup(struct net *net, const hlist_for_each_entry_rcu(x6spi, pos, &xfrm6_tn->spi_byaddr[xfrm6_tunnel_spi_hash_byaddr(saddr)], list_byaddr) { - if (memcmp(&x6spi->addr, saddr, sizeof(x6spi->addr)) == 0) + if (xfrm6_addr_equal(&x6spi->addr, saddr)) return x6spi; } @@ -211,7 +211,7 @@ static void xfrm6_tunnel_free_spi(struct net *net, xfrm_address_t *saddr) &xfrm6_tn->spi_byaddr[xfrm6_tunnel_spi_hash_byaddr(saddr)], list_byaddr) { - if (memcmp(&x6spi->addr, saddr, sizeof(x6spi->addr)) == 0) { + if (xfrm6_addr_equal(&x6spi->addr, saddr)) { if (atomic_dec_and_test(&x6spi->refcnt)) { hlist_del_rcu(&x6spi->list_byaddr); hlist_del_rcu(&x6spi->list_byspi); -- cgit v0.10.2 From 70e94e66aec255aff276397f5ed3f3626c548f1c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 29 Jan 2013 12:48:50 +0000 Subject: xfrm: Convert xfrm_addr_cmp() to boolean xfrm_addr_equal(). All users of xfrm_addr_cmp() use its result as boolean. Introduce xfrm_addr_equal() (which is equal to !xfrm_addr_cmp()) and convert all users. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 0d8a797..de34883 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1574,27 +1574,26 @@ extern struct xfrm_algo_desc *xfrm_calg_get_byname(const char *name, int probe); extern struct xfrm_algo_desc *xfrm_aead_get_byname(const char *name, int icv_len, int probe); -static inline int xfrm_addr_cmp(const xfrm_address_t *a, - const xfrm_address_t *b, - int family) +static inline bool xfrm6_addr_equal(const xfrm_address_t *a, + const xfrm_address_t *b) +{ + return ipv6_addr_equal((const struct in6_addr *)a, + (const struct in6_addr *)b); +} + +static inline bool xfrm_addr_equal(const xfrm_address_t *a, + const xfrm_address_t *b, + sa_family_t family) { switch (family) { default: case AF_INET: - return (__force u32)a->a4 - (__force u32)b->a4; + return ((__force u32)a->a4 ^ (__force u32)b->a4) == 0; case AF_INET6: - return ipv6_addr_cmp((const struct in6_addr *)a, - (const struct in6_addr *)b); + return xfrm6_addr_equal(a, b); } } -static inline bool xfrm6_addr_equal(const xfrm_address_t *a, - const xfrm_address_t *b) -{ - return ipv6_addr_equal((const struct in6_addr *)a, - (const struct in6_addr *)b); -} - static inline int xfrm_policy_id2dir(u32 index) { return index & 7; diff --git a/net/key/af_key.c b/net/key/af_key.c index 5b426a6..cc2630a 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -762,7 +762,7 @@ static struct sk_buff *__pfkey_xfrm_state2msg(const struct xfrm_state *x, } /* identity & sensitivity */ - if (xfrm_addr_cmp(&x->sel.saddr, &x->props.saddr, x->props.family)) + if (!xfrm_addr_equal(&x->sel.saddr, &x->props.saddr, x->props.family)) size += sizeof(struct sadb_address) + sockaddr_size; if (add_keys) { @@ -909,8 +909,8 @@ static struct sk_buff *__pfkey_xfrm_state2msg(const struct xfrm_state *x, if (!addr->sadb_address_prefixlen) BUG(); - if (xfrm_addr_cmp(&x->sel.saddr, &x->props.saddr, - x->props.family)) { + if (!xfrm_addr_equal(&x->sel.saddr, &x->props.saddr, + x->props.family)) { addr = (struct sadb_address*) skb_put(skb, sizeof(struct sadb_address)+sockaddr_size); addr->sadb_address_len = @@ -1321,7 +1321,7 @@ static int pfkey_getspi(struct sock *sk, struct sk_buff *skb, const struct sadb_ if (hdr->sadb_msg_seq) { x = xfrm_find_acq_byseq(net, DUMMY_MARK, hdr->sadb_msg_seq); - if (x && xfrm_addr_cmp(&x->id.daddr, xdaddr, family)) { + if (x && !xfrm_addr_equal(&x->id.daddr, xdaddr, family)) { xfrm_state_put(x); x = NULL; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 07c5857..6c9aa64 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2786,10 +2786,10 @@ static bool xfrm_migrate_selector_match(const struct xfrm_selector *sel_cmp, { if (sel_cmp->proto == IPSEC_ULPROTO_ANY) { if (sel_tgt->family == sel_cmp->family && - xfrm_addr_cmp(&sel_tgt->daddr, &sel_cmp->daddr, - sel_cmp->family) == 0 && - xfrm_addr_cmp(&sel_tgt->saddr, &sel_cmp->saddr, - sel_cmp->family) == 0 && + xfrm_addr_equal(&sel_tgt->daddr, &sel_cmp->daddr, + sel_cmp->family) && + xfrm_addr_equal(&sel_tgt->saddr, &sel_cmp->saddr, + sel_cmp->family) && sel_tgt->prefixlen_d == sel_cmp->prefixlen_d && sel_tgt->prefixlen_s == sel_cmp->prefixlen_s) { return true; @@ -2847,10 +2847,10 @@ static int migrate_tmpl_match(const struct xfrm_migrate *m, const struct xfrm_tm switch (t->mode) { case XFRM_MODE_TUNNEL: case XFRM_MODE_BEET: - if (xfrm_addr_cmp(&t->id.daddr, &m->old_daddr, - m->old_family) == 0 && - xfrm_addr_cmp(&t->saddr, &m->old_saddr, - m->old_family) == 0) { + if (xfrm_addr_equal(&t->id.daddr, &m->old_daddr, + m->old_family) && + xfrm_addr_equal(&t->saddr, &m->old_saddr, + m->old_family)) { match = 1; } break; @@ -2916,10 +2916,10 @@ static int xfrm_migrate_check(const struct xfrm_migrate *m, int num_migrate) return -EINVAL; for (i = 0; i < num_migrate; i++) { - if ((xfrm_addr_cmp(&m[i].old_daddr, &m[i].new_daddr, - m[i].old_family) == 0) && - (xfrm_addr_cmp(&m[i].old_saddr, &m[i].new_saddr, - m[i].old_family) == 0)) + if (xfrm_addr_equal(&m[i].old_daddr, &m[i].new_daddr, + m[i].old_family) && + xfrm_addr_equal(&m[i].old_saddr, &m[i].new_saddr, + m[i].old_family)) return -EINVAL; if (xfrm_addr_any(&m[i].new_daddr, m[i].new_family) || xfrm_addr_any(&m[i].new_saddr, m[i].new_family)) diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 0adae91..ae01bdb 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -691,7 +691,7 @@ static struct xfrm_state *__xfrm_state_lookup(struct net *net, u32 mark, if (x->props.family != family || x->id.spi != spi || x->id.proto != proto || - xfrm_addr_cmp(&x->id.daddr, daddr, family)) + !xfrm_addr_equal(&x->id.daddr, daddr, family)) continue; if ((mark & x->mark.m) != x->mark.v) @@ -715,8 +715,8 @@ static struct xfrm_state *__xfrm_state_lookup_byaddr(struct net *net, u32 mark, hlist_for_each_entry(x, entry, net->xfrm.state_bysrc+h, bysrc) { if (x->props.family != family || x->id.proto != proto || - xfrm_addr_cmp(&x->id.daddr, daddr, family) || - xfrm_addr_cmp(&x->props.saddr, saddr, family)) + !xfrm_addr_equal(&x->id.daddr, daddr, family) || + !xfrm_addr_equal(&x->props.saddr, saddr, family)) continue; if ((mark & x->mark.m) != x->mark.v) @@ -981,8 +981,8 @@ static void __xfrm_state_bump_genids(struct xfrm_state *xnew) if (x->props.family == family && x->props.reqid == reqid && (mark & x->mark.m) == x->mark.v && - !xfrm_addr_cmp(&x->id.daddr, &xnew->id.daddr, family) && - !xfrm_addr_cmp(&x->props.saddr, &xnew->props.saddr, family)) + xfrm_addr_equal(&x->id.daddr, &xnew->id.daddr, family) && + xfrm_addr_equal(&x->props.saddr, &xnew->props.saddr, family)) x->genid++; } } @@ -1016,8 +1016,8 @@ static struct xfrm_state *__find_acq_core(struct net *net, struct xfrm_mark *m, x->id.spi != 0 || x->id.proto != proto || (mark & x->mark.m) != x->mark.v || - xfrm_addr_cmp(&x->id.daddr, daddr, family) || - xfrm_addr_cmp(&x->props.saddr, saddr, family)) + !xfrm_addr_equal(&x->id.daddr, daddr, family) || + !xfrm_addr_equal(&x->props.saddr, saddr, family)) continue; xfrm_state_hold(x); @@ -1100,7 +1100,7 @@ int xfrm_state_add(struct xfrm_state *x) if (use_spi && x->km.seq) { x1 = __xfrm_find_acq_byseq(net, mark, x->km.seq); if (x1 && ((x1->id.proto != x->id.proto) || - xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) { + !xfrm_addr_equal(&x1->id.daddr, &x->id.daddr, family))) { to_put = x1; x1 = NULL; } @@ -1226,10 +1226,10 @@ struct xfrm_state * xfrm_migrate_state_find(struct xfrm_migrate *m) continue; if (m->reqid && x->props.reqid != m->reqid) continue; - if (xfrm_addr_cmp(&x->id.daddr, &m->old_daddr, - m->old_family) || - xfrm_addr_cmp(&x->props.saddr, &m->old_saddr, - m->old_family)) + if (!xfrm_addr_equal(&x->id.daddr, &m->old_daddr, + m->old_family) || + !xfrm_addr_equal(&x->props.saddr, &m->old_saddr, + m->old_family)) continue; xfrm_state_hold(x); return x; @@ -1241,10 +1241,10 @@ struct xfrm_state * xfrm_migrate_state_find(struct xfrm_migrate *m) if (x->props.mode != m->mode || x->id.proto != m->proto) continue; - if (xfrm_addr_cmp(&x->id.daddr, &m->old_daddr, - m->old_family) || - xfrm_addr_cmp(&x->props.saddr, &m->old_saddr, - m->old_family)) + if (!xfrm_addr_equal(&x->id.daddr, &m->old_daddr, + m->old_family) || + !xfrm_addr_equal(&x->props.saddr, &m->old_saddr, + m->old_family)) continue; xfrm_state_hold(x); return x; @@ -1269,7 +1269,7 @@ struct xfrm_state * xfrm_state_migrate(struct xfrm_state *x, memcpy(&xc->props.saddr, &m->new_saddr, sizeof(xc->props.saddr)); /* add state */ - if (!xfrm_addr_cmp(&x->id.daddr, &m->new_daddr, m->new_family)) { + if (xfrm_addr_equal(&x->id.daddr, &m->new_daddr, m->new_family)) { /* a care is needed when the destination address of the state is to be updated as it is a part of triplet */ xfrm_state_insert(xc); diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index eb872b2..fbd9e6c 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1112,7 +1112,7 @@ static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh, mark = xfrm_mark_get(attrs, &m); if (p->info.seq) { x = xfrm_find_acq_byseq(net, mark, p->info.seq); - if (x && xfrm_addr_cmp(&x->id.daddr, daddr, family)) { + if (x && !xfrm_addr_equal(&x->id.daddr, daddr, family)) { xfrm_state_put(x); x = NULL; } -- cgit v0.10.2 From d9e85655b5c9fcebf81aedc69182efbfdf4fe740 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 29 Jan 2013 12:48:58 +0000 Subject: netfilter ip6table_mangle: Use ipv6_addr_equal() where appropriate. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c index 7431121..6134a1e 100644 --- a/net/ipv6/netfilter/ip6table_mangle.c +++ b/net/ipv6/netfilter/ip6table_mangle.c @@ -11,6 +11,7 @@ #include #include #include +#include MODULE_LICENSE("GPL"); MODULE_AUTHOR("Netfilter Core Team "); @@ -60,8 +61,8 @@ ip6t_mangle_out(struct sk_buff *skb, const struct net_device *out) dev_net(out)->ipv6.ip6table_mangle); if (ret != NF_DROP && ret != NF_STOLEN && - (memcmp(&ipv6_hdr(skb)->saddr, &saddr, sizeof(saddr)) || - memcmp(&ipv6_hdr(skb)->daddr, &daddr, sizeof(daddr)) || + (!ipv6_addr_equal(&ipv6_hdr(skb)->saddr, &saddr) || + !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) || skb->mark != mark || ipv6_hdr(skb)->hop_limit != hop_limit || flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) -- cgit v0.10.2 From 29e3b1608c8dca3ae4224a26862d18ea003ccee6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 29 Jan 2013 12:49:03 +0000 Subject: netfilter ipset: Use ipv6_addr_equal() where appropriate. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/netfilter/ipset/ip_set_hash_ip.c b/net/netfilter/ipset/ip_set_hash_ip.c index 5c0b785..b7d4cb4 100644 --- a/net/netfilter/ipset/ip_set_hash_ip.c +++ b/net/netfilter/ipset/ip_set_hash_ip.c @@ -234,7 +234,7 @@ hash_ip6_data_equal(const struct hash_ip6_elem *ip1, const struct hash_ip6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0; + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6); } static inline bool diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c index 6283351..d8f77ba 100644 --- a/net/netfilter/ipset/ip_set_hash_ipport.c +++ b/net/netfilter/ipset/ip_set_hash_ipport.c @@ -284,7 +284,7 @@ hash_ipport6_data_equal(const struct hash_ipport6_elem *ip1, const struct hash_ipport6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0 && + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6) && ip1->port == ip2->port && ip1->proto == ip2->proto; } diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c index 6a21271..1da1e95 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportip.c +++ b/net/netfilter/ipset/ip_set_hash_ipportip.c @@ -294,8 +294,8 @@ hash_ipportip6_data_equal(const struct hash_ipportip6_elem *ip1, const struct hash_ipportip6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0 && - ipv6_addr_cmp(&ip1->ip2.in6, &ip2->ip2.in6) == 0 && + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6) && + ipv6_addr_equal(&ip1->ip2.in6, &ip2->ip2.in6) && ip1->port == ip2->port && ip1->proto == ip2->proto; } diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c index 2d5cd4e..f262722 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportnet.c +++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c @@ -388,8 +388,8 @@ hash_ipportnet6_data_equal(const struct hash_ipportnet6_elem *ip1, const struct hash_ipportnet6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0 && - ipv6_addr_cmp(&ip1->ip2.in6, &ip2->ip2.in6) == 0 && + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6) && + ipv6_addr_equal(&ip1->ip2.in6, &ip2->ip2.in6) && ip1->cidr == ip2->cidr && ip1->port == ip2->port && ip1->proto == ip2->proto; diff --git a/net/netfilter/ipset/ip_set_hash_net.c b/net/netfilter/ipset/ip_set_hash_net.c index 29e94b9..4b677cf 100644 --- a/net/netfilter/ipset/ip_set_hash_net.c +++ b/net/netfilter/ipset/ip_set_hash_net.c @@ -286,7 +286,7 @@ hash_net6_data_equal(const struct hash_net6_elem *ip1, const struct hash_net6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0 && + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6) && ip1->cidr == ip2->cidr; } diff --git a/net/netfilter/ipset/ip_set_hash_netiface.c b/net/netfilter/ipset/ip_set_hash_netiface.c index 45a1014..6ba985f 100644 --- a/net/netfilter/ipset/ip_set_hash_netiface.c +++ b/net/netfilter/ipset/ip_set_hash_netiface.c @@ -471,7 +471,7 @@ hash_netiface6_data_equal(const struct hash_netiface6_elem *ip1, const struct hash_netiface6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0 && + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6) && ip1->cidr == ip2->cidr && (++*multi) && ip1->physdev == ip2->physdev && diff --git a/net/netfilter/ipset/ip_set_hash_netport.c b/net/netfilter/ipset/ip_set_hash_netport.c index 7ef700d..af20c0c 100644 --- a/net/netfilter/ipset/ip_set_hash_netport.c +++ b/net/netfilter/ipset/ip_set_hash_netport.c @@ -350,7 +350,7 @@ hash_netport6_data_equal(const struct hash_netport6_elem *ip1, const struct hash_netport6_elem *ip2, u32 *multi) { - return ipv6_addr_cmp(&ip1->ip.in6, &ip2->ip.in6) == 0 && + return ipv6_addr_equal(&ip1->ip.in6, &ip2->ip.in6) && ip1->port == ip2->port && ip1->proto == ip2->proto && ip1->cidr == ip2->cidr; -- cgit v0.10.2 From d2ed273d30c5ffd14f6b5ec7ecc751d960f832fc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Tue, 29 Jan 2013 15:14:16 +0000 Subject: net: disallow drivers with buggy VLAN accel to register_netdevice() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of jumping aroung bugs that are easily fixed just don't let them in: affected drivers should be either fixed or have NETIF_F_HW_VLAN_FILTER removed from advertised features. Quick grep in drivers/net shows two drivers that have NETIF_F_HW_VLAN_FILTER but not ndo_vlan_rx_add/kill_vid(), but those are false-positives (features are commented out). OTOH two drivers have ndo_vlan_rx_add/kill_vid() implemented but don't advertise NETIF_F_HW_VLAN_FILTER. Those are: +ethernet/cisco/enic/enic_main.c +ethernet/qlogic/qlcnic/qlcnic_main.c Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index babfde9..addc578 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -117,19 +117,12 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head) int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id) { const char *name = real_dev->name; - const struct net_device_ops *ops = real_dev->netdev_ops; if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { pr_info("VLANs not supported on %s\n", name); return -EOPNOTSUPP; } - if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) && - (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid)) { - pr_info("Device %s has buggy VLAN hw accel\n", name); - return -EOPNOTSUPP; - } - if (vlan_find_dev(real_dev, vlan_id) != NULL) return -EEXIST; diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 380440b..71b64fd 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -224,8 +224,7 @@ static int __vlan_vid_add(struct vlan_info *vlan_info, unsigned short vid, if (!vid_info) return -ENOMEM; - if ((dev->features & NETIF_F_HW_VLAN_FILTER) && - ops->ndo_vlan_rx_add_vid) { + if (dev->features & NETIF_F_HW_VLAN_FILTER) { err = ops->ndo_vlan_rx_add_vid(dev, vid); if (err) { kfree(vid_info); @@ -282,8 +281,7 @@ static void __vlan_vid_del(struct vlan_info *vlan_info, unsigned short vid = vid_info->vid; int err; - if ((dev->features & NETIF_F_HW_VLAN_FILTER) && - ops->ndo_vlan_rx_kill_vid) { + if (dev->features & NETIF_F_HW_VLAN_FILTER) { err = ops->ndo_vlan_rx_kill_vid(dev, vid); if (err) { pr_warn("failed to kill vid %d for device %s\n", diff --git a/net/core/dev.c b/net/core/dev.c index a83375d..a87bc74 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6054,6 +6054,14 @@ int register_netdevice(struct net_device *dev) } } + if (((dev->hw_features | dev->features) & NETIF_F_HW_VLAN_FILTER) && + (!dev->netdev_ops->ndo_vlan_rx_add_vid || + !dev->netdev_ops->ndo_vlan_rx_kill_vid)) { + netdev_WARN(dev, "Buggy VLAN acceleration in driver!\n"); + ret = -EINVAL; + goto err_uninit; + } + ret = -EBUSY; if (!dev->ifindex) dev->ifindex = dev_new_index(net); -- cgit v0.10.2 From 29d7b331c73c4f1a8b3f7f4a94abe4eb834be351 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jan 2013 14:02:50 +0100 Subject: drivers/net/wireless/iwlegacy/4965-mac.c: adjust duplicate test Delete successive tests to the same location. This looks like simple code duplication. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // Signed-off-by: Julia Lawall Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index f1dc040..d665a3d 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6573,9 +6573,6 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto out_free_eeprom; - if (err) - goto out_free_eeprom; - /* extract MAC Address */ il4965_eeprom_get_mac(il, il->addresses[0].addr); D_INFO("MAC address: %pM\n", il->addresses[0].addr); -- cgit v0.10.2 From def64521572d8330bfa6d855e278507100fdf180 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 22 Jan 2013 17:49:14 +0100 Subject: rt2x00: print chip and firmware version by default Signed-off-by: Stanislaw Gruszka Tested-by: Xose Vazquez Perez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index b52512b..2217280 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -92,7 +92,7 @@ #define NOTICE(__dev, __msg, __args...) \ DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args) #define INFO(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args) + DEBUG_PRINTK_MSG(__dev, KERN_INFO, "Info", __msg, ##__args) #define DEBUG(__dev, __msg, __args...) \ DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args) #define EEPROM(__dev, __msg, __args...) \ diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index ed7a1bb..20c6ecc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -731,9 +731,9 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, queue->aifs = params->aifs; queue->txop = params->txop; - INFO(rt2x00dev, - "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n", - queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop); + DEBUG(rt2x00dev, + "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n", + queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop); return 0; } -- cgit v0.10.2 From 6ccea75e701d5d452b674dd5550c0caceccb5d56 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 22 Jan 2013 16:29:03 -0800 Subject: mwifiex: fix invalid access of PCIe RxBD ring buffer descriptor This patch fixes invalid access of RxBD ring buffer descriptor's length and flag inside PCIe send_data_complete() routine. We are supposed to modify TxBD buffer descriptor's length and flag here. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 237949c..7415ac8 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -846,8 +846,8 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) card->tx_buf_list[wrdoneidx] = NULL; card->txbd_ring[wrdoneidx]->paddr = 0; - card->rxbd_ring[wrdoneidx]->len = 0; - card->rxbd_ring[wrdoneidx]->flags = 0; + card->txbd_ring[wrdoneidx]->len = 0; + card->txbd_ring[wrdoneidx]->flags = 0; card->txbd_rdptr++; if ((card->txbd_rdptr & MWIFIEX_TXBD_MASK) == num_tx_buffs) -- cgit v0.10.2 From 04ccd4a1a61a2824539e04b5d7f4ee87e8aab0ed Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 23 Jan 2013 17:38:04 +0100 Subject: ath9k: add debug parameters for spectral scan Export the various parameters to userspace. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index b2d6c18..342edc5 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -754,6 +754,7 @@ struct ath_softc { /* relay(fs) channel for spectral scan */ struct rchan *rfs_chan_spec_scan; enum spectral_mode spectral_mode; + struct ath_spec_scan spec_config; int scanning; #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 6c5d313..012446d 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1035,6 +1035,182 @@ static const struct file_operations fops_spec_scan_ctl = { .llseek = default_llseek, }; +static ssize_t read_file_spectral_short_repeat(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char buf[32]; + unsigned int len; + + len = sprintf(buf, "%d\n", sc->spec_config.short_repeat); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_spectral_short_repeat(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + unsigned long val; + char buf[32]; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + + buf[len] = '\0'; + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + if (val < 0 || val > 1) + return -EINVAL; + + sc->spec_config.short_repeat = val; + return count; +} + +static const struct file_operations fops_spectral_short_repeat = { + .read = read_file_spectral_short_repeat, + .write = write_file_spectral_short_repeat, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +static ssize_t read_file_spectral_count(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char buf[32]; + unsigned int len; + + len = sprintf(buf, "%d\n", sc->spec_config.count); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_spectral_count(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + unsigned long val; + char buf[32]; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + + buf[len] = '\0'; + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + if (val < 0 || val > 255) + return -EINVAL; + + sc->spec_config.count = val; + return count; +} + +static const struct file_operations fops_spectral_count = { + .read = read_file_spectral_count, + .write = write_file_spectral_count, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +static ssize_t read_file_spectral_period(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char buf[32]; + unsigned int len; + + len = sprintf(buf, "%d\n", sc->spec_config.period); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_spectral_period(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + unsigned long val; + char buf[32]; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + + buf[len] = '\0'; + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + if (val < 0 || val > 255) + return -EINVAL; + + sc->spec_config.period = val; + return count; +} + +static const struct file_operations fops_spectral_period = { + .read = read_file_spectral_period, + .write = write_file_spectral_period, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +static ssize_t read_file_spectral_fft_period(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char buf[32]; + unsigned int len; + + len = sprintf(buf, "%d\n", sc->spec_config.fft_period); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_spectral_fft_period(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + unsigned long val; + char buf[32]; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + + buf[len] = '\0'; + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + if (val < 0 || val > 15) + return -EINVAL; + + sc->spec_config.fft_period = val; + return count; +} + +static const struct file_operations fops_spectral_fft_period = { + .read = read_file_spectral_fft_period, + .write = write_file_spectral_fft_period, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + static struct dentry *create_buf_file_handler(const char *filename, struct dentry *parent, umode_t mode, @@ -1893,6 +2069,16 @@ int ath9k_init_debug(struct ath_hw *ah) debugfs_create_file("spectral_scan_ctl", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_spec_scan_ctl); + debugfs_create_file("spectral_short_repeat", S_IRUSR | S_IWUSR, + sc->debug.debugfs_phy, sc, + &fops_spectral_short_repeat); + debugfs_create_file("spectral_count", S_IRUSR | S_IWUSR, + sc->debug.debugfs_phy, sc, &fops_spectral_count); + debugfs_create_file("spectral_period", S_IRUSR | S_IWUSR, + sc->debug.debugfs_phy, sc, &fops_spectral_period); + debugfs_create_file("spectral_fft_period", S_IRUSR | S_IWUSR, + sc->debug.debugfs_phy, sc, + &fops_spectral_fft_period); #ifdef CONFIG_ATH9K_MAC_DEBUG debugfs_create_file("samples", S_IRUSR, sc->debug.debugfs_phy, sc, diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 4b1abc7..c7d116c 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -497,6 +497,13 @@ static void ath9k_init_misc(struct ath_softc *sc) if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) sc->ant_comb.count = ATH_ANT_DIV_COMB_INIT_COUNT; + + sc->spec_config.enabled = 0; + sc->spec_config.short_repeat = true; + sc->spec_config.count = 8; + sc->spec_config.endless = false; + sc->spec_config.period = 0xFF; + sc->spec_config.fft_period = 0xF; } static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 4b72b66..5432f12 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1099,45 +1099,34 @@ int ath9k_spectral_scan_config(struct ieee80211_hw *hw, struct ath_softc *sc = hw->priv; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - struct ath_spec_scan param; if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { ath_err(common, "spectrum analyzer not implemented on this hardware\n"); return -1; } - /* NOTE: this will generate a few samples ... - * - * TODO: review default parameters, and/or define an interface to set - * them. - */ - param.enabled = 1; - param.short_repeat = true; - param.count = 8; - param.endless = false; - param.period = 0xFF; - param.fft_period = 0xF; - switch (spectral_mode) { case SPECTRAL_DISABLED: - param.enabled = 0; + sc->spec_config.enabled = 0; break; case SPECTRAL_BACKGROUND: /* send endless samples. * TODO: is this really useful for "background"? */ - param.endless = 1; + sc->spec_config.endless = 1; + sc->spec_config.enabled = 1; break; case SPECTRAL_CHANSCAN: - break; case SPECTRAL_MANUAL: + sc->spec_config.endless = 0; + sc->spec_config.enabled = 1; break; default: return -1; } ath9k_ps_wakeup(sc); - ath9k_hw_ops(ah)->spectral_scan_config(ah, ¶m); + ath9k_hw_ops(ah)->spectral_scan_config(ah, &sc->spec_config); ath9k_ps_restore(sc); sc->spectral_mode = spectral_mode; -- cgit v0.10.2 From 9b99e665f6176500e8ee61d149bbe69544354b40 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 23 Jan 2013 17:38:05 +0100 Subject: ath9k: drop spectral packets after processing them Spectral packets are "bogus" packets and should not be further evaluated by the RX path. Statistics are added to keep track of these packets. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 012446d..2bbdcf8 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -895,6 +895,7 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, RXS_ERR("RX-Bytes-All", rx_bytes_all); RXS_ERR("RX-Beacons", rx_beacons); RXS_ERR("RX-Frags", rx_frags); + RXS_ERR("RX-Spectral", rx_spectral); if (len > size) len = size; diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index a22c0d7..410d6d8 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -219,6 +219,7 @@ struct ath_tx_stats { * @rx_too_many_frags_err: Frames dropped due to too-many-frags received. * @rx_beacons: No. of beacons received. * @rx_frags: No. of rx-fragements received. + * @rx_spectral: No of spectral packets received. */ struct ath_rx_stats { u32 rx_pkts_all; @@ -237,6 +238,7 @@ struct ath_rx_stats { u32 rx_too_many_frags_err; u32 rx_beacons; u32 rx_frags; + u32 rx_spectral; }; struct ath_stats { diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d7c129b..13ee37b 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1023,9 +1023,9 @@ static s8 fix_rssi_inv_only(u8 rssi_val) return (s8) rssi_val; } - -static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, - struct ath_rx_status *rs, u64 tsf) +/* returns 1 if this was a spectral frame, even if not handled. */ +static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, + struct ath_rx_status *rs, u64 tsf) { #ifdef CONFIG_ATH_DEBUG struct ath_hw *ah = sc->sc_ah; @@ -1044,7 +1044,14 @@ static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) - return; + return 0; + + /* check if spectral scan bit is set. This does not have to be checked + * if received through a SPECTRAL phy error, but shouldn't hurt. + */ + radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; + if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) + return 0; /* Variation in the data length is possible and will be fixed later. * Note that we only support HT20 for now. @@ -1053,14 +1060,7 @@ static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, */ if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) - return; - - /* check if spectral scan bit is set. This does not have to be checked - * if received through a SPECTRAL phy error, but shouldn't hurt. - */ - radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; - if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) - return; + return 1; fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; fft_sample.tlv.length = sizeof(fft_sample) - sizeof(fft_sample.tlv); @@ -1093,7 +1093,7 @@ static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); break; default: - return; + return 1; } /* DC value (value in the middle) is the blind spot of the spectral @@ -1115,6 +1115,9 @@ static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, fft_sample.tsf = tsf; ath_debug_send_fft_sample(sc, &fft_sample.tlv); + return 1; +#else + return 0; #endif } @@ -1202,8 +1205,12 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) rxs->mactime += 0x100000000ULL; - if ((rs.rs_status & ATH9K_RXERR_PHY)) - ath_process_fft(sc, hdr, &rs, rxs->mactime); + if (rs.rs_status & ATH9K_RXERR_PHY) { + if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) { + RX_STAT_INC(rx_spectral); + goto requeue_drop_frag; + } + } retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs, rxs, &decrypt_error); -- cgit v0.10.2 From 3a325565c7fa0ba7fd1e319c5fd07665a092fb89 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 23 Jan 2013 17:38:06 +0100 Subject: ath9k: reorder error codes for spectral When using the spectral scan feature, frames with phy errors are returned for further processing to the driver. However, if the frames also have an invalid CRC (which seems to happen quite often), the frame is marked with bad CRC and not with the PHY error bit. The FFT processing function will thus miss the frames. Fix this by changing the precedence in error marking. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index b42be91..811007e 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -605,13 +605,13 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, * reported, then decryption and MIC errors are irrelevant, * the frame is going to be dropped either way */ - if (ads.ds_rxstatus8 & AR_CRCErr) - rs->rs_status |= ATH9K_RXERR_CRC; - else if (ads.ds_rxstatus8 & AR_PHYErr) { + if (ads.ds_rxstatus8 & AR_PHYErr) { rs->rs_status |= ATH9K_RXERR_PHY; phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode); rs->rs_phyerr = phyerr; - } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) + } else if (ads.ds_rxstatus8 & AR_CRCErr) + rs->rs_status |= ATH9K_RXERR_CRC; + else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= ATH9K_RXERR_DECRYPT; else if (ads.ds_rxstatus8 & AR_MichaelErr) rs->rs_status |= ATH9K_RXERR_MIC; -- cgit v0.10.2 From 4ab0b0aa57a794ce299b0192e924379d7353beef Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 23 Jan 2013 20:12:39 +0100 Subject: ath9k: Update spectral scan output data The sample data received through the spectral scan can be either in big or little endian byteorder. This information isn't stored in the output file. Therefore it is not possible for the analyzer software to find the correct byte order. It is relative common to get the data from a low end AP in big endian mode and transfer it to another computer in little endian mode to analyze it. Therefore, it would be better to store it in network (big endian) byte order. The extension of the 8 bit bins for each bin to 16 bit is not necessary. This operation can be done in userspace or on a different machine. Instead the max_exp defining the amount of shifting required for each bin is exported to userspace. The change of the output format requires a change of the type in the sample tlv to allow the userspace program to correctly detect the bin format. Reported-by: Zefir Kurtisi Signed-off-by: Sven Eckelmann [siwu@hrz.tu-chemnitz.de: squashed patches, update commit message, rebase, fix endianess bug] Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 342edc5..67df864 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -864,7 +864,7 @@ static inline u8 spectral_bitmap_weight(u8 *bins) * interface. */ enum ath_fft_sample_type { - ATH_FFT_SAMPLE_HT20 = 0, + ATH_FFT_SAMPLE_HT20 = 1, }; struct fft_sample_tlv { @@ -876,7 +876,7 @@ struct fft_sample_tlv { struct fft_sample_ht20 { struct fft_sample_tlv tlv; - u8 __alignment; + u8 max_exp; u16 freq; s8 rssi; @@ -888,7 +888,7 @@ struct fft_sample_ht20 { u64 tsf; - u16 data[SPECTRAL_HT20_NUM_BINS]; + u8 data[SPECTRAL_HT20_NUM_BINS]; } __packed; void ath9k_tasklet(unsigned long data); diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 2bbdcf8..3714b97 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1236,11 +1236,13 @@ static int remove_buf_file_handler(struct dentry *dentry) void ath_debug_send_fft_sample(struct ath_softc *sc, struct fft_sample_tlv *fft_sample_tlv) { + int length; if (!sc->rfs_chan_spec_scan) return; - relay_write(sc->rfs_chan_spec_scan, fft_sample_tlv, - fft_sample_tlv->length + sizeof(*fft_sample_tlv)); + length = __be16_to_cpu(fft_sample_tlv->length) + + sizeof(*fft_sample_tlv); + relay_write(sc->rfs_chan_spec_scan, fft_sample_tlv, length); } static struct rchan_callbacks rfs_spec_scan_cb = { diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 13ee37b..2af6f19 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1035,7 +1035,7 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, struct ath_radar_info *radar_info; struct ath_ht20_mag_info *mag_info; int len = rs->rs_datalen; - int i, dc_pos; + int dc_pos; /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT @@ -1064,8 +1064,9 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; fft_sample.tlv.length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + fft_sample.tlv.length = __cpu_to_be16(fft_sample.tlv.length); - fft_sample.freq = ah->curchan->chan->center_freq; + fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); fft_sample.noise = ah->noise; @@ -1105,14 +1106,15 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, /* mag data is at the end of the frame, in front of radar_info */ mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; - /* Apply exponent and grab further auxiliary information. */ - for (i = 0; i < SPECTRAL_HT20_NUM_BINS; i++) - fft_sample.data[i] = bins[i] << mag_info->max_exp; + /* copy raw bins without scaling them */ + memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); + fft_sample.max_exp = mag_info->max_exp & 0xf; fft_sample.max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_magnitude = __cpu_to_be16(fft_sample.max_magnitude); fft_sample.max_index = spectral_max_index(mag_info->all_bins); fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); - fft_sample.tsf = tsf; + fft_sample.tsf = __cpu_to_be64(tsf); ath_debug_send_fft_sample(sc, &fft_sample.tlv); return 1; -- cgit v0.10.2 From 28f2bce9f8bbf704c86f8c684337f82c51592c81 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 24 Jan 2013 21:59:32 +0100 Subject: rt2x00: print warning, notice and info as default Some messages provide useful information, but are disabled without CONFIG_RT2X00_DEBUG=y, so enable them by default Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 2217280..7d21e061 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -88,9 +88,9 @@ #define ERROR_PROBE(__msg, __args...) \ DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args) #define WARNING(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args) + DEBUG_PRINTK_MSG(__dev, KERN_WARNING, "Warning", __msg, ##__args) #define NOTICE(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args) + DEBUG_PRINTK_MSG(__dev, KERN_NOTICE, "Notice", __msg, ##__args) #define INFO(__dev, __msg, __args...) \ DEBUG_PRINTK_MSG(__dev, KERN_INFO, "Info", __msg, ##__args) #define DEBUG(__dev, __msg, __args...) \ -- cgit v0.10.2 From bb9c298f3193ac5b80e47b325c690700580b6bcf Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 24 Jan 2013 22:01:10 +0100 Subject: rt2800usb: move "TX status missed" messages to debug level Those messages can flood in dmesg, so do not print them by default. Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 4721cad..d686328 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -540,9 +540,9 @@ rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) { - WARNING(entry->queue->rt2x00dev, - "TX status report missed for queue %d entry %d\n", - entry->queue->qid, entry->entry_idx); + DEBUG(entry->queue->rt2x00dev, + "TX status report missed for queue %d entry %d\n", + entry->queue->qid, entry->entry_idx); return TXDONE_UNKNOWN; } -- cgit v0.10.2 From 92941382e8b80c55a4ad06b88a3bf95110969693 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 26 Jan 2013 18:13:50 +0100 Subject: rt2x00: remove NOTICE We use this macro only on 3 places - remove it and replace by other appropriate macros for printing messages. Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index a5c694f..a658b4b 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -80,7 +80,7 @@ static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev) rt2x00_rf(rt2x00dev, RF3022)) return true; - NOTICE(rt2x00dev, "Unknown RF chipset on rt305x\n"); + WARNING(rt2x00dev, "Unknown RF chipset on rt305x\n"); return false; } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 7d21e061..9a3f31a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -89,8 +89,6 @@ DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args) #define WARNING(__dev, __msg, __args...) \ DEBUG_PRINTK_MSG(__dev, KERN_WARNING, "Warning", __msg, ##__args) -#define NOTICE(__dev, __msg, __args...) \ - DEBUG_PRINTK_MSG(__dev, KERN_NOTICE, "Notice", __msg, ##__args) #define INFO(__dev, __msg, __args...) \ DEBUG_PRINTK_MSG(__dev, KERN_INFO, "Info", __msg, ##__args) #define DEBUG(__dev, __msg, __args...) \ diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b40a538..92a0aa5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1446,7 +1446,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); #ifdef CONFIG_PM int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) { - NOTICE(rt2x00dev, "Going to sleep.\n"); + DEBUG(rt2x00dev, "Going to sleep.\n"); /* * Prevent mac80211 from accessing driver while suspended. @@ -1486,7 +1486,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_suspend); int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) { - NOTICE(rt2x00dev, "Waking up.\n"); + DEBUG(rt2x00dev, "Waking up.\n"); /* * Restore/enable extra components. -- cgit v0.10.2 From 4a5fc6d7074de72dd836fbb9c5cd79f9a491871c Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Fri, 25 Jan 2013 12:47:50 +0800 Subject: rt2x00: allow AP and mesh mode to operate simultaneously Allow AP and Mesh mode to operate concurrently using single radio. Verify this using fonera 2.0n featuring RT3052 chipset and also TP-LINK TL-WN727N featuring RT5370 chipset. Signed-off-by: Chun-Yeow Yeoh Acked-by: Helmut Schaa Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 92a0aa5..1031db6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1236,7 +1236,8 @@ static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev) */ if_limit = &rt2x00dev->if_limits_ap; if_limit->max = rt2x00dev->ops->max_ap_intf; - if_limit->types = BIT(NL80211_IFTYPE_AP); + if_limit->types = BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT); /* * Build up AP interface combinations structure. -- cgit v0.10.2 From f1ab57e3a114173fdb94219937191f0c673e87dd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 25 Jan 2013 11:36:25 +0100 Subject: ssb: trivial: use pflash helper variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 2a7684c..77bc8d4 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -189,13 +189,14 @@ static void ssb_mips_serial_init(struct ssb_mipscore *mcore) static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) { struct ssb_bus *bus = mcore->dev->bus; + struct ssb_pflash *pflash = &mcore->pflash; /* When there is no chipcommon on the bus there is 4MB flash */ if (!ssb_chipco_available(&bus->chipco)) { - mcore->pflash.present = true; - mcore->pflash.buswidth = 2; - mcore->pflash.window = SSB_FLASH1; - mcore->pflash.window_size = SSB_FLASH1_SZ; + pflash->present = true; + pflash->buswidth = 2; + pflash->window = SSB_FLASH1; + pflash->window_size = SSB_FLASH1_SZ; return; } @@ -208,14 +209,14 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) break; case SSB_CHIPCO_FLASHT_PARA: pr_debug("Found parallel flash\n"); - mcore->pflash.present = true; - mcore->pflash.window = SSB_FLASH2; - mcore->pflash.window_size = SSB_FLASH2_SZ; + pflash->present = true; + pflash->window = SSB_FLASH2; + pflash->window_size = SSB_FLASH2_SZ; if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) & SSB_CHIPCO_CFG_DS16) == 0) - mcore->pflash.buswidth = 1; + pflash->buswidth = 1; else - mcore->pflash.buswidth = 2; + pflash->buswidth = 2; break; } } -- cgit v0.10.2 From c7a4a9e3880cc8cdc1f2958796e517d9d96ff7e0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 25 Jan 2013 11:36:26 +0100 Subject: ssb: register platform device for parallel flash MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 77bc8d4..33b37da 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -10,6 +10,7 @@ #include +#include #include #include #include @@ -17,6 +18,25 @@ #include "ssb_private.h" +static const char *part_probes[] = { "bcm47xxpart", NULL }; + +static struct physmap_flash_data ssb_pflash_data = { + .part_probe_types = part_probes, +}; + +static struct resource ssb_pflash_resource = { + .name = "ssb_pflash", + .flags = IORESOURCE_MEM, +}; + +struct platform_device ssb_pflash_dev = { + .name = "physmap-flash", + .dev = { + .platform_data = &ssb_pflash_data, + }, + .resource = &ssb_pflash_resource, + .num_resources = 1, +}; static inline u32 mips_read32(struct ssb_mipscore *mcore, u16 offset) @@ -197,7 +217,7 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) pflash->buswidth = 2; pflash->window = SSB_FLASH1; pflash->window_size = SSB_FLASH1_SZ; - return; + goto ssb_pflash; } /* There is ChipCommon, so use it to read info about flash */ @@ -219,6 +239,13 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) pflash->buswidth = 2; break; } + +ssb_pflash: + if (pflash->present) { + ssb_pflash_data.width = pflash->buswidth; + ssb_pflash_resource.start = pflash->window; + ssb_pflash_resource.end = pflash->window + pflash->window_size; + } } u32 ssb_cpu_clock(struct ssb_mipscore *mcore) diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index c82c5c9..db77057 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -540,6 +540,14 @@ static int ssb_devices_register(struct ssb_bus *bus) dev_idx++; } +#ifdef CONFIG_SSB_DRIVER_MIPS + if (bus->mipscore.pflash.present) { + err = platform_device_register(&ssb_pflash_dev); + if (err) + pr_err("Error registering parallel flash\n"); + } +#endif + return 0; error: /* Unwind the already registered devices. */ diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index 77d9426..53198dc 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -228,6 +228,10 @@ static inline int ssb_sflash_init(struct ssb_chipcommon *cc) } #endif /* CONFIG_SSB_SFLASH */ +#ifdef CONFIG_SSB_DRIVER_MIPS +extern struct platform_device ssb_pflash_dev; +#endif + #ifdef CONFIG_SSB_DRIVER_EXTIF extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); -- cgit v0.10.2 From 73e4dbe4ca9d5573f84818964276668b42177de2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 25 Jan 2013 11:37:26 +0100 Subject: bcma: register platform device for parallel flash Signed-off-by: John W. Linville diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index d35294e..16c1ddd 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -47,6 +47,7 @@ int bcma_sprom_get(struct bcma_bus *bus); /* driver_chipcommon.c */ #ifdef CONFIG_BCMA_DRIVER_MIPS void bcma_chipco_serial_init(struct bcma_drv_cc *cc); +extern struct platform_device bcma_pflash_dev; #endif /* CONFIG_BCMA_DRIVER_MIPS */ /* driver_chipcommon_pmu.c */ diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 9fe86ee..9a7f0e3 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -14,11 +14,33 @@ #include +#include +#include #include #include #include #include +static const char *part_probes[] = { "bcm47xxpart", NULL }; + +static struct physmap_flash_data bcma_pflash_data = { + .part_probe_types = part_probes, +}; + +static struct resource bcma_pflash_resource = { + .name = "bcma_pflash", + .flags = IORESOURCE_MEM, +}; + +struct platform_device bcma_pflash_dev = { + .name = "physmap-flash", + .dev = { + .platform_data = &bcma_pflash_data, + }, + .resource = &bcma_pflash_resource, + .num_resources = 1, +}; + /* The 47162a0 hangs when reading MIPS DMP registers registers */ static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) { @@ -211,6 +233,7 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) { struct bcma_bus *bus = mcore->core->bus; struct bcma_drv_cc *cc = &bus->drv_cc; + struct bcma_pflash *pflash = &cc->pflash; switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { case BCMA_CC_FLASHT_STSER: @@ -220,15 +243,20 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) break; case BCMA_CC_FLASHT_PARA: bcma_debug(bus, "Found parallel flash\n"); - cc->pflash.present = true; - cc->pflash.window = BCMA_SOC_FLASH2; - cc->pflash.window_size = BCMA_SOC_FLASH2_SZ; + pflash->present = true; + pflash->window = BCMA_SOC_FLASH2; + pflash->window_size = BCMA_SOC_FLASH2_SZ; if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & BCMA_CC_FLASH_CFG_DS) == 0) - cc->pflash.buswidth = 1; + pflash->buswidth = 1; else - cc->pflash.buswidth = 2; + pflash->buswidth = 2; + + bcma_pflash_data.width = pflash->buswidth; + bcma_pflash_resource.start = pflash->window; + bcma_pflash_resource.end = pflash->window + pflash->window_size; + break; default: bcma_err(bus, "Flash type not supported\n"); diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index d12b7da..95ba575 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -149,6 +149,14 @@ static int bcma_register_cores(struct bcma_bus *bus) dev_id++; } +#ifdef CONFIG_BCMA_DRIVER_MIPS + if (bus->drv_cc.pflash.present) { + err = platform_device_register(&bcma_pflash_dev); + if (err) + bcma_err(bus, "Error registering parallel flash\n"); + } +#endif + #ifdef CONFIG_BCMA_SFLASH if (bus->drv_cc.sflash.present) { err = platform_device_register(&bcma_sflash_dev); -- cgit v0.10.2 From e882efc96dba0a48adbe460b04d552d9a749a7c0 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:17:32 +0530 Subject: mwl8k: Stop bsses before hw specific commands For the commands, that might change the hw characteristics of the PHY device, stop the running bsses and resume them once command is complete. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 224cf91..398b8b1 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -285,6 +285,9 @@ struct mwl8k_priv { char *fw_pref; char *fw_alt; struct completion firmware_loading_complete; + + /* bitmap of running BSSes */ + u32 running_bsses; }; #define MAX_WEP_KEY_LEN 13 @@ -2156,6 +2159,8 @@ static void mwl8k_fw_unlock(struct ieee80211_hw *hw) } } +static void mwl8k_enable_bsses(struct ieee80211_hw *hw, bool enable, + u32 bitmap); /* * Command processing. @@ -2174,6 +2179,34 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) int rc; unsigned long timeout = 0; u8 buf[32]; + u32 bitmap = 0; + + wiphy_dbg(hw->wiphy, "Posting %s [%d]\n", + mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), cmd->macid); + + /* Before posting firmware commands that could change the hardware + * characteristics, make sure that all BSSes are stopped temporary. + * Enable these stopped BSSes after completion of the commands + */ + + rc = mwl8k_fw_lock(hw); + if (rc) + return rc; + + if (priv->ap_fw && priv->running_bsses) { + switch (le16_to_cpu(cmd->code)) { + case MWL8K_CMD_SET_RF_CHANNEL: + case MWL8K_CMD_RADIO_CONTROL: + case MWL8K_CMD_RF_TX_POWER: + case MWL8K_CMD_TX_POWER: + case MWL8K_CMD_RF_ANTENNA: + case MWL8K_CMD_RTS_THRESHOLD: + case MWL8K_CMD_MIMO_CONFIG: + bitmap = priv->running_bsses; + mwl8k_enable_bsses(hw, false, bitmap); + break; + } + } cmd->result = (__force __le16) 0xffff; dma_size = le16_to_cpu(cmd->length); @@ -2182,13 +2215,6 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) if (pci_dma_mapping_error(priv->pdev, dma_addr)) return -ENOMEM; - rc = mwl8k_fw_lock(hw); - if (rc) { - pci_unmap_single(priv->pdev, dma_addr, dma_size, - PCI_DMA_BIDIRECTIONAL); - return rc; - } - priv->hostcmd_wait = &cmd_wait; iowrite32(dma_addr, regs + MWL8K_HIU_GEN_PTR); iowrite32(MWL8K_H2A_INT_DOORBELL, @@ -2201,7 +2227,6 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) priv->hostcmd_wait = NULL; - mwl8k_fw_unlock(hw); pci_unmap_single(priv->pdev, dma_addr, dma_size, PCI_DMA_BIDIRECTIONAL); @@ -2228,6 +2253,11 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) ms); } + if (bitmap) + mwl8k_enable_bsses(hw, true, bitmap); + + mwl8k_fw_unlock(hw); + return rc; } @@ -3680,8 +3710,16 @@ static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int enable) { struct mwl8k_cmd_bss_start *cmd; + struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif); + struct mwl8k_priv *priv = hw->priv; int rc; + if (enable && (priv->running_bsses & (1 << mwl8k_vif->macid))) + return 0; + + if (!enable && !(priv->running_bsses & (1 << mwl8k_vif->macid))) + return 0; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); if (cmd == NULL) return -ENOMEM; @@ -3693,9 +3731,31 @@ static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw, rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header); kfree(cmd); + if (!rc) { + if (enable) + priv->running_bsses |= (1 << mwl8k_vif->macid); + else + priv->running_bsses &= ~(1 << mwl8k_vif->macid); + } return rc; } +static void mwl8k_enable_bsses(struct ieee80211_hw *hw, bool enable, u32 bitmap) +{ + struct mwl8k_priv *priv = hw->priv; + struct mwl8k_vif *mwl8k_vif, *tmp_vif; + struct ieee80211_vif *vif; + + list_for_each_entry_safe(mwl8k_vif, tmp_vif, &priv->vif_list, list) { + vif = mwl8k_vif->vif; + + if (!(bitmap & (1 << mwl8k_vif->macid))) + continue; + + if (vif->type == NL80211_IFTYPE_AP) + mwl8k_cmd_bss_start(hw, vif, enable); + } +} /* * CMD_BASTREAM. */ @@ -5948,6 +6008,8 @@ static int mwl8k_probe(struct pci_dev *pdev, priv->hw_restart_in_progress = false; + priv->running_bsses = 0; + return rc; err_stop_firmware: -- cgit v0.10.2 From 0f4316b97d045e9b5b270cafa4b924769699eb3d Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:17:45 +0530 Subject: mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionally Avoid calling mwl8k_cmd_set_rf_channel unconditionally by checking IEEE80211_CONF_CHANGE_CHANNEL. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 398b8b1..78a89f6 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4797,9 +4797,11 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed) if (rc) goto out; - rc = mwl8k_cmd_set_rf_channel(hw, conf); - if (rc) - goto out; + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + rc = mwl8k_cmd_set_rf_channel(hw, conf); + if (rc) + goto out; + } if (conf->power_level > 18) conf->power_level = 18; -- cgit v0.10.2 From a246ac38cdd886bf053f67d5275a20e1a99ff586 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:17:56 +0530 Subject: mwl8k: Move tx/rx antenna configuration to mwl8k_probe_hw This avoids calling mwl8k_cmd_rf_antenna functions every time mwl8k_config function is called. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 78a89f6..b17ef49 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4814,12 +4814,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed) goto out; } - rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x3); - if (rc) - wiphy_warn(hw->wiphy, "failed to set # of RX antennas"); - rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_TX, 0x7); - if (rc) - wiphy_warn(hw->wiphy, "failed to set # of TX antennas"); } else { rc = mwl8k_cmd_rf_tx_power(hw, conf->power_level); @@ -5709,6 +5703,15 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw) goto err_free_irq; } + /* Configure Antennas */ + rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x3); + if (rc) + wiphy_warn(hw->wiphy, "failed to set # of RX antennas"); + rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_TX, 0x7); + if (rc) + wiphy_warn(hw->wiphy, "failed to set # of TX antennas"); + + /* Disable interrupts */ iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK); free_irq(priv->pdev->irq, hw); -- cgit v0.10.2 From 2acdaa7a578cf43566950a6cfb70848ff6607553 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:19:55 +0530 Subject: mwl8k: Announce simultaneous AP-STA support on AP fw Specify the STA support in iface_limit and in wihpy->interface_modes Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index b17ef49..0a22bb1 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5799,6 +5799,7 @@ fail: static const struct ieee80211_iface_limit ap_if_limits[] = { { .max = 8, .types = BIT(NL80211_IFTYPE_AP) }, + { .max = 1, .types = BIT(NL80211_IFTYPE_STATION) }, }; static const struct ieee80211_iface_combination ap_if_comb = { @@ -5891,6 +5892,7 @@ static int mwl8k_firmware_load_success(struct mwl8k_priv *priv) if (priv->ap_macids_supported || priv->device_info->fw_image_ap) { hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP); + hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_STATION); hw->wiphy->iface_combinations = &ap_if_comb; hw->wiphy->n_iface_combinations = 1; } -- cgit v0.10.2 From d59c1cfd7c106f53272143bc3f05b0b15bdd5dfa Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:20:03 +0530 Subject: mwl8k: Allow adding station interface on AP firmware When user wants to add a station interface when AP firmware is loaded & in-use, allow creating it and also notify user about the same. Allow adding max one STA interface for AP fw. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 0a22bb1..84207a8 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -2519,7 +2519,7 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw) priv->hw_rev = cmd->hw_rev; mwl8k_set_caps(hw, le32_to_cpu(cmd->caps)); priv->ap_macids_supported = 0x000000ff; - priv->sta_macids_supported = 0x00000000; + priv->sta_macids_supported = 0x00000100; priv->num_ampdu_queues = le32_to_cpu(cmd->num_of_ampdu_queues); if (priv->num_ampdu_queues > MWL8K_MAX_AMPDU_QUEUES) { wiphy_warn(hw->wiphy, "fw reported %d ampdu queues" @@ -4669,12 +4669,18 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw, break; case NL80211_IFTYPE_STATION: if (priv->ap_fw && di->fw_image_sta) { - /* we must load the sta fw to meet this request */ - if (!list_empty(&priv->vif_list)) - return -EBUSY; - rc = mwl8k_reload_firmware(hw, di->fw_image_sta); - if (rc) - return rc; + if (!list_empty(&priv->vif_list)) { + wiphy_warn(hw->wiphy, "AP interface is running.\n" + "Adding STA interface for WDS"); + } else { + /* we must load the sta fw to + * meet this request. + */ + rc = mwl8k_reload_firmware(hw, + di->fw_image_sta); + if (rc) + return rc; + } } macids_supported = priv->sta_macids_supported; break; -- cgit v0.10.2 From af458831c49d634027811b6cf9072cdcd03961e8 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:20:12 +0530 Subject: mwl8k: set mac type to MWL8K_MAC_TYPE_SECONDARY_CLIENT Set mac type for station interface on AP firmware as secondary. This allows the firmware to set specific characteristics for the STA interface. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 84207a8..4d3f140 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3538,7 +3538,10 @@ static int mwl8k_cmd_update_mac_addr(struct ieee80211_hw *hw, mac_type = MWL8K_MAC_TYPE_PRIMARY_AP; if (vif != NULL && vif->type == NL80211_IFTYPE_STATION) { if (mwl8k_vif->macid + 1 == ffs(priv->sta_macids_supported)) - mac_type = MWL8K_MAC_TYPE_PRIMARY_CLIENT; + if (priv->ap_fw) + mac_type = MWL8K_MAC_TYPE_SECONDARY_CLIENT; + else + mac_type = MWL8K_MAC_TYPE_PRIMARY_CLIENT; else mac_type = MWL8K_MAC_TYPE_SECONDARY_CLIENT; } else if (vif != NULL && vif->type == NL80211_IFTYPE_AP) { -- cgit v0.10.2 From 751930cb1d6da7b7891d8ffe84877cbf21915e0d Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:20:28 +0530 Subject: mwl8k: Enable hw encryption for STA mode on AP fw Firmware supports hardware encryption feature for the station interface running on AP firmware. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 4d3f140..01136b5 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4265,8 +4265,9 @@ static int mwl8k_set_key(struct ieee80211_hw *hw, u8 encr_type; u8 *addr; struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif); + struct mwl8k_priv *priv = hw->priv; - if (vif->type == NL80211_IFTYPE_STATION) + if (vif->type == NL80211_IFTYPE_STATION && !priv->ap_fw) return -EOPNOTSUPP; if (sta == NULL) -- cgit v0.10.2 From d994a1c867ed301aaad26f769885d78e599e1daf Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:20:35 +0530 Subject: mwl8k: Add/Del self entry for AP interface only Add and delete self entry in the firmware sta database for AP interface only. We do not need such an entry for STA interface. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 01136b5..55f1e9d 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4708,7 +4708,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw, /* Set the mac address. */ mwl8k_cmd_set_mac_addr(hw, vif, vif->addr); - if (priv->ap_fw) + if (vif->type == NL80211_IFTYPE_AP) mwl8k_cmd_set_new_stn_add_self(hw, vif); priv->macids_used |= 1 << mwl8k_vif->macid; @@ -4733,7 +4733,7 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw, struct mwl8k_priv *priv = hw->priv; struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif); - if (priv->ap_fw) + if (vif->type == NL80211_IFTYPE_AP) mwl8k_cmd_set_new_stn_del(hw, vif, vif->addr); mwl8k_cmd_del_mac_addr(hw, vif, vif->addr); -- cgit v0.10.2 From 41bf911910fc41996878afc679c352d89477d626 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:20:42 +0530 Subject: mwl8k: Choose interface specific calls on vif type Choose interface specific function calls based on interface type instead of firmware types. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 55f1e9d..a9d5c09 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4984,11 +4984,9 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, u32 changed) { - struct mwl8k_priv *priv = hw->priv; - - if (!priv->ap_fw) + if (vif->type == NL80211_IFTYPE_STATION) mwl8k_bss_info_changed_sta(hw, vif, info, changed); - else + if (vif->type == NL80211_IFTYPE_AP) mwl8k_bss_info_changed_ap(hw, vif, info, changed); } -- cgit v0.10.2 From dcee7438caa409948347c0a3821e3ab6e7459984 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 25 Jan 2013 16:20:50 +0530 Subject: mwl8k: Do not call STA specific cmds not supported by the AP fw While using STA mode in the AP firmware, avoid calling some firmware commands which are not supported by the AP firmware. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a9d5c09..2031130 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4881,7 +4881,8 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif, rcu_read_unlock(); } - if ((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc) { + if ((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc && + !priv->ap_fw) { rc = mwl8k_cmd_set_rate(hw, vif, ap_legacy_rates, ap_mcs_rates); if (rc) goto out; @@ -4889,6 +4890,25 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif, rc = mwl8k_cmd_use_fixed_rate_sta(hw); if (rc) goto out; + } else { + if ((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc && + priv->ap_fw) { + int idx; + int rate; + + /* Use AP firmware specific rate command. + */ + idx = ffs(vif->bss_conf.basic_rates); + if (idx) + idx--; + + if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) + rate = mwl8k_rates_24[idx].hw_value; + else + rate = mwl8k_rates_50[idx].hw_value; + + mwl8k_cmd_use_fixed_rate_ap(hw, rate, rate); + } } if (changed & BSS_CHANGED_ERP_PREAMBLE) { @@ -4898,13 +4918,13 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif, goto out; } - if (changed & BSS_CHANGED_ERP_SLOT) { + if ((changed & BSS_CHANGED_ERP_SLOT) && !priv->ap_fw) { rc = mwl8k_cmd_set_slot(hw, vif->bss_conf.use_short_slot); if (rc) goto out; } - if (vif->bss_conf.assoc && + if (vif->bss_conf.assoc && !priv->ap_fw && (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_HT))) { rc = mwl8k_cmd_set_aid(hw, vif, ap_legacy_rates); -- cgit v0.10.2 From baf58b0e8f0e460e252e40f5fdf393b01a3cef7d Mon Sep 17 00:00:00 2001 From: Anatol Pomozov Date: Fri, 25 Jan 2013 10:32:30 -0800 Subject: rtl8723ae: Fix misspellings sucess->success Signed-off-by: Anatol Pomozov Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c index f55b176..3b71dab 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c @@ -252,7 +252,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, u16 box_reg = 0, box_extreg = 0; u8 u1tmp; bool isfw_rd = false; - bool bwrite_sucess = false; + bool bwrite_success = false; u8 wait_h2c_limmit = 100; u8 wait_writeh2c_limmit = 100; u8 boxcontent[4], boxextcontent[2]; @@ -291,7 +291,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, } } - while (!bwrite_sucess) { + while (!bwrite_success) { wait_writeh2c_limmit--; if (wait_writeh2c_limmit == 0) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, @@ -429,7 +429,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, break; } - bwrite_sucess = true; + bwrite_success = true; rtlhal->last_hmeboxnum = boxnum + 1; if (rtlhal->last_hmeboxnum == 4) -- cgit v0.10.2 From 3220712d3aa4f5df12b7305ce340f6d216a84477 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 26 Jan 2013 00:56:03 +0400 Subject: mwifiex: don't return zero on failure paths in mwifiex_pcie_init() If pci_iomap() fails in mwifiex_pcie_init(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds -EIO as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 7415ac8..df88e65 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1985,6 +1985,7 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) card->pci_mmap = pci_iomap(pdev, 0, 0); if (!card->pci_mmap) { dev_err(adapter->dev, "iomap(0) error\n"); + ret = -EIO; goto err_iomap0; } ret = pci_request_region(pdev, 2, DRV_NAME); @@ -1995,6 +1996,7 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) card->pci_mmap1 = pci_iomap(pdev, 2, 0); if (!card->pci_mmap1) { dev_err(adapter->dev, "iomap(2) error\n"); + ret = -EIO; goto err_iomap2; } -- cgit v0.10.2 From 5b2e2eccab80e2f56d06df582e473fb0d8630f35 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 25 Jan 2013 18:23:00 -0800 Subject: mwifiex: do not overwrite error code from lower layer driver Instead of converting it to a bogus error code -1, we should return the original error code from lower layer driver. This error code will be printed so it may give user some clues on what has happened. Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 5a1c1d0..e35b67a 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -332,7 +332,7 @@ mwifiex_write_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, u32 pkt_len, u32 port) { struct sdio_mmc_card *card = adapter->card; - int ret = -1; + int ret; u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; @@ -350,8 +350,7 @@ mwifiex_write_data_sync(struct mwifiex_adapter *adapter, sdio_claim_host(card->func); - if (!sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size)) - ret = 0; + ret = sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size); sdio_release_host(card->func); @@ -365,7 +364,7 @@ static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, u32 len, u32 port, u8 claim) { struct sdio_mmc_card *card = adapter->card; - int ret = -1; + int ret; u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; @@ -376,8 +375,7 @@ static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, if (claim) sdio_claim_host(card->func); - if (!sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size)) - ret = 0; + ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size); if (claim) sdio_release_host(card->func); diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index 5d4a10a..f90fe21 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -672,7 +672,7 @@ static int mwifiex_write_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, *len, &actual_length, timeout); if (ret) { dev_err(adapter->dev, "usb_bulk_msg for tx failed: %d\n", ret); - ret = -1; + return ret; } *len = actual_length; @@ -691,7 +691,7 @@ static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, *len, &actual_length, timeout); if (ret) { dev_err(adapter->dev, "usb_bulk_msg for rx failed: %d\n", ret); - ret = -1; + return ret; } *len = actual_length; -- cgit v0.10.2 From a6ca2e10f795111a90a4efabb07717258669e03d Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 26 Jan 2013 21:38:35 +0100 Subject: ssb: add gpio_to_irq The old bcm47xx gpio code had support for gpio_to_irq, but the new code did not provide this function, but returned -ENXIO all the time. This patch adds the missing function. arch/mips/bcm47xx/wgt634u.c calls gpio_to_irq() and got the correct irq number with the old gpio handling code. With this patch the code in wgt634u.c should work again. I do not have a wgt634u to test this. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_gpio.c b/drivers/ssb/driver_gpio.c index 97ac0a3..accabe3 100644 --- a/drivers/ssb/driver_gpio.c +++ b/drivers/ssb/driver_gpio.c @@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio) ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0); } +static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + struct ssb_bus *bus = ssb_gpio_get_bus(chip); + + if (bus->bustype == SSB_BUSTYPE_SSB) + return ssb_mips_irq(bus->chipco.dev) + 2; + else + return -EINVAL; +} + static int ssb_gpio_chipco_init(struct ssb_bus *bus) { struct gpio_chip *chip = &bus->gpio; @@ -86,6 +96,7 @@ static int ssb_gpio_chipco_init(struct ssb_bus *bus) chip->set = ssb_gpio_chipco_set_value; chip->direction_input = ssb_gpio_chipco_direction_input; chip->direction_output = ssb_gpio_chipco_direction_output; + chip->to_irq = ssb_gpio_chipco_to_irq; chip->ngpio = 16; /* There is just one SoC in one device and its GPIO addresses should be * deterministic to address them more easily. The other buses could get @@ -134,6 +145,16 @@ static int ssb_gpio_extif_direction_output(struct gpio_chip *chip, return 0; } +static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + struct ssb_bus *bus = ssb_gpio_get_bus(chip); + + if (bus->bustype == SSB_BUSTYPE_SSB) + return ssb_mips_irq(bus->extif.dev) + 2; + else + return -EINVAL; +} + static int ssb_gpio_extif_init(struct ssb_bus *bus) { struct gpio_chip *chip = &bus->gpio; @@ -144,6 +165,7 @@ static int ssb_gpio_extif_init(struct ssb_bus *bus) chip->set = ssb_gpio_extif_set_value; chip->direction_input = ssb_gpio_extif_direction_input; chip->direction_output = ssb_gpio_extif_direction_output; + chip->to_irq = ssb_gpio_extif_to_irq; chip->ngpio = 5; /* There is just one SoC in one device and its GPIO addresses should be * deterministic to address them more easily. The other buses could get diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h index 07a9c7a..afe79d4 100644 --- a/include/linux/ssb/ssb_driver_mips.h +++ b/include/linux/ssb/ssb_driver_mips.h @@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore) { } +static inline unsigned int ssb_mips_irq(struct ssb_device *dev) +{ + return 0; +} + #endif /* CONFIG_SSB_DRIVER_MIPS */ #endif /* LINUX_SSB_MIPSCORE_H_ */ -- cgit v0.10.2 From 8f1ca2683225afa21b827ff620a6225c390771a9 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 26 Jan 2013 21:39:44 +0100 Subject: bcma: add gpio_to_irq The old bcm47xx gpio code had support for gpio_to_irq, but the new code did not provide this function, but returned -ENXIO all the time. This patch adds the missing function. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c index 9a6f585..0b5df53 100644 --- a/drivers/bcma/driver_gpio.c +++ b/drivers/bcma/driver_gpio.c @@ -73,6 +73,16 @@ static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio) bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); } +static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); + + if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) + return bcma_core_irq(cc->core); + else + return -EINVAL; +} + int bcma_gpio_init(struct bcma_drv_cc *cc) { struct gpio_chip *chip = &cc->gpio; @@ -85,6 +95,7 @@ int bcma_gpio_init(struct bcma_drv_cc *cc) chip->set = bcma_gpio_set_value; chip->direction_input = bcma_gpio_direction_input; chip->direction_output = bcma_gpio_direction_output; + chip->to_irq = bcma_gpio_to_irq; chip->ngpio = 16; /* There is just one SoC in one device and its GPIO addresses should be * deterministic to address them more easily. The other buses could get diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 0d1ea29..fb61f3f 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -42,13 +42,18 @@ struct bcma_drv_mips { #ifdef CONFIG_BCMA_DRIVER_MIPS extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); + +extern unsigned int bcma_core_irq(struct bcma_device *core); #else static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } + +static inline unsigned int bcma_core_irq(struct bcma_device *core) +{ + return 0; +} #endif extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); -extern unsigned int bcma_core_irq(struct bcma_device *core); - #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ -- cgit v0.10.2 From 00bcd0d699c7b3c294c1b276709e069b2903bc32 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 26 Jan 2013 22:19:35 +0100 Subject: iwlegacy: fix antenna bitmask This patch is based on "iwlwifi: fix antenna bitmask". (362b0563b28506d53) Like the new iwlagn devices, the old 4965N device only supports a maximum of three antennas. Hence only three bits are used, the fourth bit is likely the A-MPDU indicator. Cc: Stanislaw Gruszka Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/commands.h b/drivers/net/wireless/iwlegacy/commands.h index 25dd7d2..829d3b9 100644 --- a/drivers/net/wireless/iwlegacy/commands.h +++ b/drivers/net/wireless/iwlegacy/commands.h @@ -1134,7 +1134,7 @@ struct il_wep_cmd { #define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) -#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0 +#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0x70 #define RX_RES_PHY_FLAGS_ANTENNA_POS 4 #define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) -- cgit v0.10.2 From 44ceaf371b683b0e90cbc0fb111c6d90b87d79cf Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 27 Jan 2013 10:55:41 -0800 Subject: net: iwlegacy: remove unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix: drivers/net/wireless/iwlegacy/4965.c: In function ‘il4965_post_associate’: drivers/net/wireless/iwlegacy/4965.c:1751:25: warning: variable ‘conf’ set but not used [-Wunused-but-set-variable] seen when building allmodconfig on x86_64 with W=1 by removing the unused variable. Signed-off-by: Guenter Roeck Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c index 5db1171..91eb2d0 100644 --- a/drivers/net/wireless/iwlegacy/4965.c +++ b/drivers/net/wireless/iwlegacy/4965.c @@ -1748,7 +1748,6 @@ static void il4965_post_associate(struct il_priv *il) { struct ieee80211_vif *vif = il->vif; - struct ieee80211_conf *conf = NULL; int ret = 0; if (!vif || !il->is_open) @@ -1759,8 +1758,6 @@ il4965_post_associate(struct il_priv *il) il_scan_cancel_timeout(il, 200); - conf = &il->hw->conf; - il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; il_commit_rxon(il); -- cgit v0.10.2 From 44ba973699b831414c3f8eef68ee5a7fe1208a05 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 27 Jan 2013 16:40:34 -0600 Subject: rtlwifi: Eliminate two empty routines Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index c1e065f..204f46c 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -217,19 +217,6 @@ static void rtl_tx_status(void *ppriv, } } -static void rtl_rate_init(void *ppriv, - struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta) -{ -} - -static void rtl_rate_update(void *ppriv, - struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - u32 changed) -{ -} - static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -274,8 +261,6 @@ static struct rate_control_ops rtl_rate_ops = { .free = rtl_rate_free, .alloc_sta = rtl_rate_alloc_sta, .free_sta = rtl_rate_free_sta, - .rate_init = rtl_rate_init, - .rate_update = rtl_rate_update, .tx_status = rtl_tx_status, .get_rate = rtl_get_rate, }; -- cgit v0.10.2 From 485f107d341cb1d09e010e0466b02a1ad026f489 Mon Sep 17 00:00:00 2001 From: Cyril Roelandt Date: Sun, 27 Jan 2013 23:42:48 +0100 Subject: mwifiex: avoid out of bounds access in mwifiex_get_common_rates. Check that the array indexes are in-bounds before accessing the rate2 and tmp arrays. Found with the following semantic patch: @@ identifier t; identifier idx; expression E; statement S; @@ * for (... ; <+... t[idx] ...+> && idx < E ; ...) S Signed-off-by: Cyril Roelandt Acked-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 893d809..f0a634d 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -157,8 +157,8 @@ static int mwifiex_get_common_rates(struct mwifiex_private *priv, u8 *rate1, memset(rate1, 0, rate1_size); - for (i = 0; rate2[i] && i < rate2_size; i++) { - for (j = 0; tmp[j] && j < rate1_size; j++) { + for (i = 0; i < rate2_size && rate2[i]; i++) { + for (j = 0; j < rate1_size && tmp[j]; j++) { /* Check common rate, excluding the bit for basic rate */ if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) { -- cgit v0.10.2 From 7269494e12449e8bd4850e69b653562e369558b3 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:30:56 +0200 Subject: wil6210: Detect FW error In the firmware, added is ability to report internal errors using IRQ. Catch this IRQ and notify user space via netlink User space get notified like (udevadm monitor --kernel --property): KERNEL[12660.320520] change /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/0000:03:01.0/0000:05:00.0/net/wlan12 (net) ACTION=change DEVPATH=/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/0000:03:01.0/0000:05:00.0/net/wlan12 DEVTYPE=wlan EVENT=FW_ERROR IFINDEX=6 INTERFACE=wlan12 SEQNUM=2489 SOURCE=wil6210 SUBSYSTEM=net Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 38049da..d2109d5 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -38,7 +38,9 @@ #define WIL6210_IMC_RX BIT_DMA_EP_RX_ICR_RX_DONE #define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \ BIT_DMA_EP_TX_ICR_TX_DONE_N(0)) -#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | ISR_MISC_MBOX_EVT) +#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | \ + ISR_MISC_MBOX_EVT | \ + ISR_MISC_FW_ERROR) #define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \ BIT_DMA_PSEUDO_CAUSE_TX | \ @@ -228,6 +230,17 @@ static irqreturn_t wil6210_irq_tx(int irq, void *cookie) return IRQ_HANDLED; } +static void wil_notify_fw_error(struct wil6210_priv *wil) +{ + struct device *dev = &wil_to_ndev(wil)->dev; + char *envp[3] = { + [0] = "SOURCE=wil6210", + [1] = "EVENT=FW_ERROR", + [2] = NULL, + }; + kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp); +} + static irqreturn_t wil6210_irq_misc(int irq, void *cookie) { struct wil6210_priv *wil = cookie; @@ -244,6 +257,13 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie) wil6210_mask_irq_misc(wil); + if (isr & ISR_MISC_FW_ERROR) { + wil_dbg_IRQ(wil, "IRQ: Firmware error\n"); + clear_bit(wil_status_fwready, &wil->status); + wil_notify_fw_error(wil); + isr &= ~ISR_MISC_FW_ERROR; + } + if (isr & ISR_MISC_FW_READY) { wil_dbg_IRQ(wil, "IRQ: FW ready\n"); /** diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 9bcfffa..3bd2447 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -101,8 +101,7 @@ struct RGF_ICR { #define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */ #define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0) #define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1) - #define BIT_DMA_EP_MISC_ICR_FW_INT0 BIT(28) - #define BIT_DMA_EP_MISC_ICR_FW_INT1 BIT(29) + #define BIT_DMA_EP_MISC_ICR_FW_INT(n) BIT(28+n) /* n = [0..3] */ /* Interrupt moderation control */ #define RGF_DMA_ITR_CNT_TRSH (0x881c5c) @@ -121,8 +120,9 @@ struct RGF_ICR { #define SW_INT_MBOX BIT_USER_USER_ICR_SW_INT_2 /* ISR register bits */ -#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT0 -#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT1 +#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT(0) +#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT(1) +#define ISR_MISC_FW_ERROR BIT_DMA_EP_MISC_ICR_FW_INT(3) /* Hardware definitions end */ -- cgit v0.10.2 From 4789d728e5e5e2dbf347d793917523db8776548c Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:30:57 +0200 Subject: wil6210: rearrange IRQ debug printing Make printings from IRQ appears in dmesg in chronological order Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index d2109d5..660bacf 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -390,6 +390,8 @@ static irqreturn_t wil6210_hardirq(int irq, void *cookie) if (wil6210_debug_irq_mask(wil, pseudo_cause)) return IRQ_NONE; + wil_dbg_IRQ(wil, "Pseudo IRQ 0x%08x\n", pseudo_cause); + wil6210_mask_irq_pseudo(wil); /* Discover real IRQ cause @@ -421,8 +423,6 @@ static irqreturn_t wil6210_hardirq(int irq, void *cookie) if (rc != IRQ_WAKE_THREAD) wil6210_unmask_irq_pseudo(wil); - wil_dbg_IRQ(wil, "Hard IRQ 0x%08x\n", pseudo_cause); - return rc; } -- cgit v0.10.2 From 2057ebb2bd5da3aab1603d546f7a019b9a971ee8 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:30:58 +0200 Subject: wil6210: remove raw wil_dbg() calls Introduce debug category "MISC", convert all raw wil_dbg() to this category. This improves dynamic debug manageability Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 116f4e8..56f39b6 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -228,8 +228,8 @@ static int wil_cfg80211_scan(struct wiphy *wiphy, } /* 0-based channel indexes */ cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1; - wil_dbg(wil, "Scan for ch %d : %d MHz\n", ch, - request->channels[i]->center_freq); + wil_dbg_MISC(wil, "Scan for ch %d : %d MHz\n", ch, + request->channels[i]->center_freq); } return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) + @@ -425,8 +425,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy, return -EINVAL; } - wil_dbg(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value, - channel->center_freq, info->privacy ? "secure" : "open"); + wil_dbg_MISC(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value, + channel->center_freq, info->privacy ? "secure" : "open"); print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET, info->ssid, info->ssid_len); diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 95fcd36..90786df 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -64,7 +64,7 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid) struct net_device *ndev = wil_to_ndev(wil); struct wireless_dev *wdev = wil->wdev; - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_MISC(wil, "%s()\n", __func__); wil_link_off(wil); clear_bit(wil_status_fwconnected, &wil->status); @@ -99,7 +99,7 @@ static void wil_connect_timer_fn(ulong x) { struct wil6210_priv *wil = (void *)x; - wil_dbg(wil, "Connect timeout\n"); + wil_dbg_MISC(wil, "Connect timeout\n"); /* reschedule to thread context - disconnect won't * run from atomic context @@ -109,7 +109,7 @@ static void wil_connect_timer_fn(ulong x) int wil_priv_init(struct wil6210_priv *wil) { - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_MISC(wil, "%s()\n", __func__); mutex_init(&wil->mutex); mutex_init(&wil->wmi_mutex); @@ -162,7 +162,7 @@ void wil_priv_deinit(struct wil6210_priv *wil) static void wil_target_reset(struct wil6210_priv *wil) { - wil_dbg(wil, "Resetting...\n"); + wil_dbg_MISC(wil, "Resetting...\n"); /* register write */ #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a)) @@ -202,7 +202,7 @@ static void wil_target_reset(struct wil6210_priv *wil) msleep(2000); - wil_dbg(wil, "Reset completed\n"); + wil_dbg_MISC(wil, "Reset completed\n"); #undef W #undef S @@ -225,8 +225,8 @@ static int wil_wait_for_fw_ready(struct wil6210_priv *wil) wil_err(wil, "Firmware not ready\n"); return -ETIME; } else { - wil_dbg(wil, "FW ready after %d ms\n", - jiffies_to_msecs(to-left)); + wil_dbg_MISC(wil, "FW ready after %d ms\n", + jiffies_to_msecs(to-left)); } return 0; } @@ -278,7 +278,7 @@ void wil_link_on(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_MISC(wil, "%s()\n", __func__); netif_carrier_on(ndev); netif_tx_wake_all_queues(ndev); @@ -288,7 +288,7 @@ void wil_link_off(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_MISC(wil, "%s()\n", __func__); netif_tx_stop_all_queues(ndev); netif_carrier_off(ndev); @@ -311,27 +311,27 @@ static int __wil_up(struct wil6210_priv *wil) wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC); switch (wdev->iftype) { case NL80211_IFTYPE_STATION: - wil_dbg(wil, "type: STATION\n"); + wil_dbg_MISC(wil, "type: STATION\n"); bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_AP: - wil_dbg(wil, "type: AP\n"); + wil_dbg_MISC(wil, "type: AP\n"); bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_CLIENT: - wil_dbg(wil, "type: P2P_CLIENT\n"); + wil_dbg_MISC(wil, "type: P2P_CLIENT\n"); bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_GO: - wil_dbg(wil, "type: P2P_GO\n"); + wil_dbg_MISC(wil, "type: P2P_GO\n"); bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_MONITOR: - wil_dbg(wil, "type: Monitor\n"); + wil_dbg_MISC(wil, "type: Monitor\n"); bi = 0; ndev->type = ARPHRD_IEEE80211_RADIOTAP; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */ diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index 0fc83ed..ab1cade 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -53,7 +53,7 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil) } wil->n_msi = use_msi; if (wil->n_msi) { - wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi); + wil_dbg_MISC(wil, "Setup %d MSI interrupts\n", use_msi); rc = pci_enable_msi_block(pdev, wil->n_msi); if (rc && (wil->n_msi == 3)) { wil_err(wil, "3 MSI mode failed, try 1 MSI\n"); @@ -65,7 +65,7 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil) wil->n_msi = 0; } } else { - wil_dbg(wil, "MSI interrupts disabled, use INTx\n"); + wil_dbg_MISC(wil, "MSI interrupts disabled, use INTx\n"); } rc = wil6210_init_irq(wil, pdev->irq); diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index f29c294..241dd0e 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -100,8 +100,8 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring) d->dma.status = TX_DMA_STATUS_DU; } - wil_dbg(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size, - vring->va, (unsigned long long)vring->pa, vring->ctx); + wil_dbg_MISC(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size, + vring->va, (unsigned long long)vring->pa, vring->ctx); return 0; } @@ -528,8 +528,8 @@ int wil_rx_init(struct wil6210_priv *wil) vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr); - wil_dbg(wil, "Rx init: status %d tail 0x%08x\n", - le32_to_cpu(evt.evt.status), vring->hwtail); + wil_dbg_MISC(wil, "Rx init: status %d tail 0x%08x\n", + le32_to_cpu(evt.evt.status), vring->hwtail); rc = wil_rx_refill(wil, vring->size); if (rc) diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 3bd2447..a9b6f70 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -275,6 +275,7 @@ struct wil6210_priv { #define wil_dbg_IRQ(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg) #define wil_dbg_TXRX(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg) #define wil_dbg_WMI(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg) +#define wil_dbg_MISC(wil, fmt, arg...) wil_dbg(wil, "DBG[MISC]" fmt, ##arg) #define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \ groupsize, buf, len, ascii) \ -- cgit v0.10.2 From 47e19af9a791d8862cdffb754cc2347b6389d487 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:30:59 +0200 Subject: wil6210: Refactor rx init/fini Move WMI related operations to wmi.c as helper functions Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 241dd0e..f3b523b 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -484,53 +484,18 @@ void wil_rx_handle(struct wil6210_priv *wil) int wil_rx_init(struct wil6210_priv *wil) { - struct net_device *ndev = wil_to_ndev(wil); - struct wireless_dev *wdev = wil->wdev; struct vring *vring = &wil->vring_rx; int rc; - struct wmi_cfg_rx_chain_cmd cmd = { - .action = WMI_RX_CHAIN_ADD, - .rx_sw_ring = { - .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), - }, - .mid = 0, /* TODO - what is it? */ - .decap_trans_type = WMI_DECAP_TYPE_802_3, - }; - struct { - struct wil6210_mbox_hdr_wmi wmi; - struct wmi_cfg_rx_chain_done_event evt; - } __packed evt; vring->size = WIL6210_RX_RING_SIZE; rc = wil_vring_alloc(wil, vring); if (rc) return rc; - cmd.rx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa); - cmd.rx_sw_ring.ring_size = cpu_to_le16(vring->size); - if (wdev->iftype == NL80211_IFTYPE_MONITOR) { - struct ieee80211_channel *ch = wdev->preset_chandef.chan; - - cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON); - if (ch) - cmd.sniffer_cfg.channel = ch->hw_value - 1; - cmd.sniffer_cfg.phy_info_mode = - cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP); - cmd.sniffer_cfg.phy_support = - cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL) - ? WMI_SNIFFER_CP : WMI_SNIFFER_DP); - } - /* typical time for secure PCP is 840ms */ - rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), - WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000); + rc = wmi_rx_chain_add(wil, vring); if (rc) goto err_free; - vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr); - - wil_dbg_MISC(wil, "Rx init: status %d tail 0x%08x\n", - le32_to_cpu(evt.evt.status), vring->hwtail); - rc = wil_rx_refill(wil, vring->size); if (rc) goto err_free; @@ -547,22 +512,7 @@ void wil_rx_fini(struct wil6210_priv *wil) struct vring *vring = &wil->vring_rx; if (vring->va) { - int rc; - struct wmi_cfg_rx_chain_cmd cmd = { - .action = cpu_to_le32(WMI_RX_CHAIN_DEL), - .rx_sw_ring = { - .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), - }, - }; - struct { - struct wil6210_mbox_hdr_wmi wmi; - struct wmi_cfg_rx_chain_done_event cfg; - } __packed wmi_rx_cfg_reply; - - rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), - WMI_CFG_RX_CHAIN_DONE_EVENTID, - &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply), - 100); + wmi_rx_chain_del(wil); wil_vring_free(wil, vring, 0); } } diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index a9b6f70..9b2ebdd 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -329,6 +329,8 @@ int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index, const void *mac_addr, int key_len, const void *key); int wmi_echo(struct wil6210_priv *wil); int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie); +int wmi_rx_chain_del(struct wil6210_priv *wil); +int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring); int wil6210_init_irq(struct wil6210_priv *wil, int irq); void wil6210_fini_irq(struct wil6210_priv *wil, int irq); diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 12915f6..d109c3f 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -18,8 +18,10 @@ #include #include #include +#include #include "wil6210.h" +#include "txrx.h" #include "wmi.h" /** @@ -853,6 +855,77 @@ int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie) return rc; } +int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring) +{ + struct wireless_dev *wdev = wil->wdev; + struct net_device *ndev = wil_to_ndev(wil); + struct wmi_cfg_rx_chain_cmd cmd = { + .action = WMI_RX_CHAIN_ADD, + .rx_sw_ring = { + .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), + .ring_mem_base = cpu_to_le64(vring->pa), + .ring_size = cpu_to_le16(vring->size), + }, + .mid = 0, /* TODO - what is it? */ + .decap_trans_type = WMI_DECAP_TYPE_802_3, + }; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_cfg_rx_chain_done_event evt; + } __packed evt; + int rc; + + if (wdev->iftype == NL80211_IFTYPE_MONITOR) { + struct ieee80211_channel *ch = wdev->preset_chandef.chan; + + cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON); + if (ch) + cmd.sniffer_cfg.channel = ch->hw_value - 1; + cmd.sniffer_cfg.phy_info_mode = + cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP); + cmd.sniffer_cfg.phy_support = + cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL) + ? WMI_SNIFFER_CP : WMI_SNIFFER_DP); + } + /* typical time for secure PCP is 840ms */ + rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), + WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000); + if (rc) + return rc; + + vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr); + + wil_dbg_MISC(wil, "Rx init: status %d tail 0x%08x\n", + le32_to_cpu(evt.evt.status), vring->hwtail); + + if (le32_to_cpu(evt.evt.status) != WMI_CFG_RX_CHAIN_SUCCESS) + rc = -EINVAL; + + return rc; +} + +int wmi_rx_chain_del(struct wil6210_priv *wil) +{ + int rc; + struct wmi_cfg_rx_chain_cmd cmd = { + .action = cpu_to_le32(WMI_RX_CHAIN_DEL), + .rx_sw_ring = { + .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), + }, + }; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_cfg_rx_chain_done_event cfg; + } __packed wmi_rx_cfg_reply; + + rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), + WMI_CFG_RX_CHAIN_DONE_EVENTID, + &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply), + 100); + + return rc; +} + void wmi_event_flush(struct wil6210_priv *wil) { struct pending_wmi_event *evt, *t; -- cgit v0.10.2 From 795ce734380b729e076131528e485e98a580d3e8 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:00 +0200 Subject: wil6210: Count Tx statistics on Tx completion This allows to account for Tx errors Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index f3b523b..e7ea538 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -752,8 +752,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev) } switch (rc) { case 0: - ndev->stats.tx_packets++; - ndev->stats.tx_bytes += skb->len; + /* statistics will be updated on the tx_complete */ dev_kfree_skb_any(skb); return NETDEV_TX_OK; case -ENOMEM: @@ -777,6 +776,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev) */ void wil_tx_complete(struct wil6210_priv *wil, int ringid) { + struct net_device *ndev = wil_to_ndev(wil); struct device *dev = wil_to_dev(wil); struct vring *vring = &wil->vring_tx[ringid]; @@ -804,6 +804,13 @@ void wil_tx_complete(struct wil6210_priv *wil, int ringid) pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32); skb = vring->ctx[vring->swtail]; if (skb) { + if (d->dma.error == 0) { + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += skb->len; + } else { + ndev->stats.tx_errors++; + } + dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE); dev_kfree_skb_any(skb); vring->ctx[vring->swtail] = NULL; -- cgit v0.10.2 From cb901733b4d6f6d1f00354f62de7df826cf1dfe8 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:01 +0200 Subject: wil6210: Fix: Tx stall Due to multi-tx-queue design, wil_start_xmit() used to be executed concurrently for different queues. Then, these transmits delivered to the same queue, creating race. As result, Tx descriptor may be skipped, causing stall in hardware. Convert to single Tx queue fixes it. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c index 3068b5c..073dc7d 100644 --- a/drivers/net/wireless/ath/wil6210/netdev.c +++ b/drivers/net/wireless/ath/wil6210/netdev.c @@ -35,35 +35,10 @@ static int wil_stop(struct net_device *ndev) return wil_down(wil); } -/* - * AC to queue mapping - * - * AC_VO -> queue 3 - * AC_VI -> queue 2 - * AC_BE -> queue 1 - * AC_BK -> queue 0 - */ -static u16 wil_select_queue(struct net_device *ndev, struct sk_buff *skb) -{ - static const u16 wil_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; - struct wil6210_priv *wil = ndev_to_wil(ndev); - u16 rc; - - skb->priority = cfg80211_classify8021d(skb); - - rc = wil_1d_to_queue[skb->priority]; - - wil_dbg_TXRX(wil, "%s() %d -> %d\n", __func__, (int)skb->priority, - (int)rc); - - return rc; -} - static const struct net_device_ops wil_netdev_ops = { .ndo_open = wil_open, .ndo_stop = wil_stop, .ndo_start_xmit = wil_start_xmit, - .ndo_select_queue = wil_select_queue, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; @@ -97,7 +72,7 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr) ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels; cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT); - ndev = alloc_netdev_mqs(0, "wlan%d", ether_setup, WIL6210_TX_QUEUES, 1); + ndev = alloc_netdev(0, "wlan%d", ether_setup); if (!ndev) { dev_err(dev, "alloc_netdev_mqs failed\n"); rc = -ENOMEM; diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 9b2ebdd..d957286 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -36,8 +36,6 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1) #define WIL6210_MEM_SIZE (2*1024*1024UL) -#define WIL6210_TX_QUEUES (4) - #define WIL6210_RX_RING_SIZE (128) #define WIL6210_TX_RING_SIZE (128) #define WIL6210_MAX_TX_RINGS (24) -- cgit v0.10.2 From 241804cb7b09d05c1e79735fa51521b211f51fd1 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:02 +0200 Subject: wil6210: Call skb_orphan() right before Rx indication Other parts of Rx path (BACK logic) will need to access associated data Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index e7ea538..649f504 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -430,6 +430,8 @@ static void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev) int rc; unsigned int len = skb->len; + skb_orphan(skb); + if (in_interrupt()) rc = netif_rx(skb); else @@ -464,8 +466,6 @@ void wil_rx_handle(struct wil6210_priv *wil) wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_OFFSET, 16, 1, skb->data, skb_headlen(skb), false); - skb_orphan(skb); - if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) { skb->dev = ndev; skb_reset_mac_header(skb); -- cgit v0.10.2 From b98917d742bcf519b15894e78c17f2eb287b3584 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:03 +0200 Subject: wil6210: Fix "don't scan after connect" logic When connect times out, scan was not re-enabled. Strictly say, it is firmware issue - it should issue "disconnect" event but it does not. Compensate in the driver. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 90786df..3e9a71f 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -85,6 +85,8 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid) for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) wil_vring_fini_tx(wil, i); + + clear_bit(wil_status_dontscan, &wil->status); } static void wil_disconnect_worker(struct work_struct *work) diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index d109c3f..dffb002 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -459,7 +459,6 @@ static void wmi_evt_disconnect(struct wil6210_priv *wil, int id, wil->sinfo_gen++; wil6210_disconnect(wil, evt->bssid); - clear_bit(wil_status_dontscan, &wil->status); } static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len) -- cgit v0.10.2 From 56f004b4672972b6c936573eca835ed90787097a Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:04 +0200 Subject: wil6210: Separate common code for mbox regs caching to function Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 3e9a71f..4c15330 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -109,6 +109,15 @@ static void wil_connect_timer_fn(ulong x) schedule_work(&wil->disconnect_worker); } +static void wil_cache_mbox_regs(struct wil6210_priv *wil) +{ + /* make shadow copy of registers that should not change on run time */ + wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, + sizeof(struct wil6210_mbox_ctl)); + wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); + wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); +} + int wil_priv_init(struct wil6210_priv *wil) { wil_dbg_MISC(wil, "%s()\n", __func__); @@ -138,11 +147,7 @@ int wil_priv_init(struct wil6210_priv *wil) return -EAGAIN; } - /* make shadow copy of registers that should not change on run time */ - wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, - sizeof(struct wil6210_mbox_ctl)); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); + wil_cache_mbox_regs(wil); return 0; } @@ -260,11 +265,7 @@ int wil_reset(struct wil6210_priv *wil) wil->pending_connect_cid = -1; INIT_COMPLETION(wil->wmi_ready); - /* make shadow copy of registers that should not change on run time */ - wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, - sizeof(struct wil6210_mbox_ctl)); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); + wil_cache_mbox_regs(wil); /* TODO: release MAC reset */ wil6210_enable_irq(wil); -- cgit v0.10.2 From e08b5906ccf323e2ad7b0448329b7cbcfda4c94e Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:05 +0200 Subject: wil6210: Reorder reset preparation sequence Disable interrupts first to prevent spurious WMI events arrival Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 4c15330..aa598f3 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -250,13 +250,13 @@ int wil_reset(struct wil6210_priv *wil) cancel_work_sync(&wil->disconnect_worker); wil6210_disconnect(wil, NULL); + wil6210_disable_irq(wil); + wil->status = 0; + wmi_event_flush(wil); - flush_workqueue(wil->wmi_wq); flush_workqueue(wil->wmi_wq_conn); - - wil6210_disable_irq(wil); - wil->status = 0; + flush_workqueue(wil->wmi_wq); /* TODO: put MAC in reset */ wil_target_reset(wil); -- cgit v0.10.2 From 7743882d6f59b675809b59b5ac570677c94c426f Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:06 +0200 Subject: wil6210: fix checkpatch CamelCase warnings Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 56f39b6..4b48f2e 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -228,7 +228,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy, } /* 0-based channel indexes */ cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1; - wil_dbg_MISC(wil, "Scan for ch %d : %d MHz\n", ch, + wil_dbg_misc(wil, "Scan for ch %d : %d MHz\n", ch, request->channels[i]->center_freq); } @@ -425,7 +425,7 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy, return -EINVAL; } - wil_dbg_MISC(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value, + wil_dbg_misc(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value, channel->center_freq, info->privacy ? "secure" : "open"); print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET, info->ssid, info->ssid_len); diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 660bacf..865c33f 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -96,7 +96,7 @@ static void wil6210_mask_irq_misc(struct wil6210_priv *wil) static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil) { - wil_dbg_IRQ(wil, "%s()\n", __func__); + wil_dbg_irq(wil, "%s()\n", __func__); iowrite32(WIL6210_IRQ_DISABLE, wil->csr + HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW)); @@ -127,7 +127,7 @@ static void wil6210_unmask_irq_misc(struct wil6210_priv *wil) static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil) { - wil_dbg_IRQ(wil, "%s()\n", __func__); + wil_dbg_irq(wil, "%s()\n", __func__); set_bit(wil_status_irqen, &wil->status); @@ -137,7 +137,7 @@ static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil) void wil6210_disable_irq(struct wil6210_priv *wil) { - wil_dbg_IRQ(wil, "%s()\n", __func__); + wil_dbg_irq(wil, "%s()\n", __func__); wil6210_mask_irq_tx(wil); wil6210_mask_irq_rx(wil); @@ -147,7 +147,7 @@ void wil6210_disable_irq(struct wil6210_priv *wil) void wil6210_enable_irq(struct wil6210_priv *wil) { - wil_dbg_IRQ(wil, "%s()\n", __func__); + wil_dbg_irq(wil, "%s()\n", __func__); iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) + offsetof(struct RGF_ICR, ICC)); @@ -169,7 +169,7 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie) HOSTADDR(RGF_DMA_EP_RX_ICR) + offsetof(struct RGF_ICR, ICR)); - wil_dbg_IRQ(wil, "ISR RX 0x%08x\n", isr); + wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr); if (!isr) { wil_err(wil, "spurious IRQ: RX\n"); @@ -179,7 +179,7 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie) wil6210_mask_irq_rx(wil); if (isr & BIT_DMA_EP_RX_ICR_RX_DONE) { - wil_dbg_IRQ(wil, "RX done\n"); + wil_dbg_irq(wil, "RX done\n"); isr &= ~BIT_DMA_EP_RX_ICR_RX_DONE; wil_rx_handle(wil); } @@ -199,7 +199,7 @@ static irqreturn_t wil6210_irq_tx(int irq, void *cookie) HOSTADDR(RGF_DMA_EP_TX_ICR) + offsetof(struct RGF_ICR, ICR)); - wil_dbg_IRQ(wil, "ISR TX 0x%08x\n", isr); + wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr); if (!isr) { wil_err(wil, "spurious IRQ: TX\n"); @@ -210,13 +210,13 @@ static irqreturn_t wil6210_irq_tx(int irq, void *cookie) if (isr & BIT_DMA_EP_TX_ICR_TX_DONE) { uint i; - wil_dbg_IRQ(wil, "TX done\n"); + wil_dbg_irq(wil, "TX done\n"); isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE; for (i = 0; i < 24; i++) { u32 mask = BIT_DMA_EP_TX_ICR_TX_DONE_N(i); if (isr & mask) { isr &= ~mask; - wil_dbg_IRQ(wil, "TX done(%i)\n", i); + wil_dbg_irq(wil, "TX done(%i)\n", i); wil_tx_complete(wil, i); } } @@ -248,7 +248,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie) HOSTADDR(RGF_DMA_EP_MISC_ICR) + offsetof(struct RGF_ICR, ICR)); - wil_dbg_IRQ(wil, "ISR MISC 0x%08x\n", isr); + wil_dbg_irq(wil, "ISR MISC 0x%08x\n", isr); if (!isr) { wil_err(wil, "spurious IRQ: MISC\n"); @@ -258,14 +258,14 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie) wil6210_mask_irq_misc(wil); if (isr & ISR_MISC_FW_ERROR) { - wil_dbg_IRQ(wil, "IRQ: Firmware error\n"); + wil_dbg_irq(wil, "IRQ: Firmware error\n"); clear_bit(wil_status_fwready, &wil->status); wil_notify_fw_error(wil); isr &= ~ISR_MISC_FW_ERROR; } if (isr & ISR_MISC_FW_READY) { - wil_dbg_IRQ(wil, "IRQ: FW ready\n"); + wil_dbg_irq(wil, "IRQ: FW ready\n"); /** * Actual FW ready indicated by the * WMI_FW_READY_EVENTID @@ -288,10 +288,10 @@ static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie) struct wil6210_priv *wil = cookie; u32 isr = wil->isr_misc; - wil_dbg_IRQ(wil, "Thread ISR MISC 0x%08x\n", isr); + wil_dbg_irq(wil, "Thread ISR MISC 0x%08x\n", isr); if (isr & ISR_MISC_MBOX_EVT) { - wil_dbg_IRQ(wil, "MBOX event\n"); + wil_dbg_irq(wil, "MBOX event\n"); wmi_recv_cmd(wil); isr &= ~ISR_MISC_MBOX_EVT; } @@ -313,7 +313,7 @@ static irqreturn_t wil6210_thread_irq(int irq, void *cookie) { struct wil6210_priv *wil = cookie; - wil_dbg_IRQ(wil, "Thread IRQ\n"); + wil_dbg_irq(wil, "Thread IRQ\n"); /* Discover real IRQ cause */ if (wil->isr_misc) wil6210_irq_misc_thread(irq, cookie); @@ -390,7 +390,7 @@ static irqreturn_t wil6210_hardirq(int irq, void *cookie) if (wil6210_debug_irq_mask(wil, pseudo_cause)) return IRQ_NONE; - wil_dbg_IRQ(wil, "Pseudo IRQ 0x%08x\n", pseudo_cause); + wil_dbg_irq(wil, "Pseudo IRQ 0x%08x\n", pseudo_cause); wil6210_mask_irq_pseudo(wil); diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index aa598f3..d160ea8 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -64,7 +64,7 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid) struct net_device *ndev = wil_to_ndev(wil); struct wireless_dev *wdev = wil->wdev; - wil_dbg_MISC(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); wil_link_off(wil); clear_bit(wil_status_fwconnected, &wil->status); @@ -101,7 +101,7 @@ static void wil_connect_timer_fn(ulong x) { struct wil6210_priv *wil = (void *)x; - wil_dbg_MISC(wil, "Connect timeout\n"); + wil_dbg_misc(wil, "Connect timeout\n"); /* reschedule to thread context - disconnect won't * run from atomic context @@ -120,7 +120,7 @@ static void wil_cache_mbox_regs(struct wil6210_priv *wil) int wil_priv_init(struct wil6210_priv *wil) { - wil_dbg_MISC(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); mutex_init(&wil->mutex); mutex_init(&wil->wmi_mutex); @@ -169,7 +169,7 @@ void wil_priv_deinit(struct wil6210_priv *wil) static void wil_target_reset(struct wil6210_priv *wil) { - wil_dbg_MISC(wil, "Resetting...\n"); + wil_dbg_misc(wil, "Resetting...\n"); /* register write */ #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a)) @@ -209,7 +209,7 @@ static void wil_target_reset(struct wil6210_priv *wil) msleep(2000); - wil_dbg_MISC(wil, "Reset completed\n"); + wil_dbg_misc(wil, "Reset completed\n"); #undef W #undef S @@ -232,7 +232,7 @@ static int wil_wait_for_fw_ready(struct wil6210_priv *wil) wil_err(wil, "Firmware not ready\n"); return -ETIME; } else { - wil_dbg_MISC(wil, "FW ready after %d ms\n", + wil_dbg_misc(wil, "FW ready after %d ms\n", jiffies_to_msecs(to-left)); } return 0; @@ -281,7 +281,7 @@ void wil_link_on(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); - wil_dbg_MISC(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); netif_carrier_on(ndev); netif_tx_wake_all_queues(ndev); @@ -291,7 +291,7 @@ void wil_link_off(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); - wil_dbg_MISC(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); netif_tx_stop_all_queues(ndev); netif_carrier_off(ndev); @@ -314,27 +314,27 @@ static int __wil_up(struct wil6210_priv *wil) wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC); switch (wdev->iftype) { case NL80211_IFTYPE_STATION: - wil_dbg_MISC(wil, "type: STATION\n"); + wil_dbg_misc(wil, "type: STATION\n"); bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_AP: - wil_dbg_MISC(wil, "type: AP\n"); + wil_dbg_misc(wil, "type: AP\n"); bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_CLIENT: - wil_dbg_MISC(wil, "type: P2P_CLIENT\n"); + wil_dbg_misc(wil, "type: P2P_CLIENT\n"); bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_GO: - wil_dbg_MISC(wil, "type: P2P_GO\n"); + wil_dbg_misc(wil, "type: P2P_GO\n"); bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_MONITOR: - wil_dbg_MISC(wil, "type: Monitor\n"); + wil_dbg_misc(wil, "type: Monitor\n"); bi = 0; ndev->type = ARPHRD_IEEE80211_RADIOTAP; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */ diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index ab1cade..81c35c6 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -53,7 +53,7 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil) } wil->n_msi = use_msi; if (wil->n_msi) { - wil_dbg_MISC(wil, "Setup %d MSI interrupts\n", use_msi); + wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi); rc = pci_enable_msi_block(pdev, wil->n_msi); if (rc && (wil->n_msi == 3)) { wil_err(wil, "3 MSI mode failed, try 1 MSI\n"); @@ -65,7 +65,7 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil) wil->n_msi = 0; } } else { - wil_dbg_MISC(wil, "MSI interrupts disabled, use INTx\n"); + wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n"); } rc = wil6210_init_irq(wil, pdev->irq); diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 649f504..f0d0913 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -100,7 +100,7 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring) d->dma.status = TX_DMA_STATUS_DU; } - wil_dbg_MISC(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size, + wil_dbg_misc(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size, vring->va, (unsigned long long)vring->pa, vring->ctx); return 0; @@ -353,8 +353,8 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil, if (ndev->type == ARPHRD_IEEE80211_RADIOTAP) wil_rx_add_radiotap_header(wil, skb, d); - wil_dbg_TXRX(wil, "Rx[%3d] : %d bytes\n", vring->swhead, d->dma.length); - wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_NONE, 32, 4, + wil_dbg_txrx(wil, "Rx[%3d] : %d bytes\n", vring->swhead, d->dma.length); + wil_hex_dump_txrx("Rx ", DUMP_PREFIX_NONE, 32, 4, (const void *)d, sizeof(*d), false); wil_vring_advance_head(vring, 1); @@ -369,7 +369,7 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil, */ ftype = wil_rxdesc_ftype(d) << 2; if (ftype != IEEE80211_FTYPE_DATA) { - wil_dbg_TXRX(wil, "Non-data frame ftype 0x%08x\n", ftype); + wil_dbg_txrx(wil, "Non-data frame ftype 0x%08x\n", ftype); /* TODO: process it */ kfree_skb(skb); return NULL; @@ -461,9 +461,9 @@ void wil_rx_handle(struct wil6210_priv *wil) wil_err(wil, "Rx IRQ while Rx not yet initialized\n"); return; } - wil_dbg_TXRX(wil, "%s()\n", __func__); + wil_dbg_txrx(wil, "%s()\n", __func__); while (NULL != (skb = wil_vring_reap_rx(wil, v))) { - wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_OFFSET, 16, 1, + wil_hex_dump_txrx("Rx ", DUMP_PREFIX_OFFSET, 16, 1, skb->data, skb_headlen(skb), false); if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) { @@ -639,7 +639,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring, uint i = swhead; dma_addr_t pa; - wil_dbg_TXRX(wil, "%s()\n", __func__); + wil_dbg_txrx(wil, "%s()\n", __func__); if (avail < vring->size/8) netif_tx_stop_all_queues(wil_to_ndev(wil)); @@ -656,9 +656,9 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring, pa = dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE); - wil_dbg_TXRX(wil, "Tx skb %d bytes %p -> %#08llx\n", skb_headlen(skb), + wil_dbg_txrx(wil, "Tx skb %d bytes %p -> %#08llx\n", skb_headlen(skb), skb->data, (unsigned long long)pa); - wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_OFFSET, 16, 1, + wil_hex_dump_txrx("Tx ", DUMP_PREFIX_OFFSET, 16, 1, skb->data, skb_headlen(skb), false); if (unlikely(dma_mapping_error(dev, pa))) @@ -687,12 +687,12 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring, d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS); d->dma.d0 |= (vring_index << DMA_CFG_DESC_TX_0_QID_POS); - wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_NONE, 32, 4, + wil_hex_dump_txrx("Tx ", DUMP_PREFIX_NONE, 32, 4, (const void *)d, sizeof(*d), false); /* advance swhead */ wil_vring_advance_head(vring, nr_frags + 1); - wil_dbg_TXRX(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead); + wil_dbg_txrx(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead); iowrite32(vring->swhead, wil->csr + HOSTADDR(vring->hwtail)); /* hold reference to skb * to prevent skb release before accounting @@ -725,7 +725,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct vring *vring; int rc; - wil_dbg_TXRX(wil, "%s()\n", __func__); + wil_dbg_txrx(wil, "%s()\n", __func__); if (!test_bit(wil_status_fwready, &wil->status)) { wil_err(wil, "FW not ready\n"); goto drop; @@ -785,7 +785,7 @@ void wil_tx_complete(struct wil6210_priv *wil, int ringid) return; } - wil_dbg_TXRX(wil, "%s(%d)\n", __func__, ringid); + wil_dbg_txrx(wil, "%s(%d)\n", __func__, ringid); while (!wil_vring_is_empty(vring)) { volatile struct vring_tx_desc *d = &vring->va[vring->swtail].tx; @@ -794,11 +794,11 @@ void wil_tx_complete(struct wil6210_priv *wil, int ringid) if (!(d->dma.status & TX_DMA_STATUS_DU)) break; - wil_dbg_TXRX(wil, + wil_dbg_txrx(wil, "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n", vring->swtail, d->dma.length, d->dma.status, d->dma.error); - wil_hex_dump_TXRX("TxC ", DUMP_PREFIX_NONE, 32, 4, + wil_hex_dump_txrx("TxC ", DUMP_PREFIX_NONE, 32, 4, (const void *)d, sizeof(*d), false); pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32); diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index d957286..69e5162 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -270,18 +270,18 @@ struct wil6210_priv { #define wil_info(wil, fmt, arg...) netdev_info(wil_to_ndev(wil), fmt, ##arg) #define wil_err(wil, fmt, arg...) netdev_err(wil_to_ndev(wil), fmt, ##arg) -#define wil_dbg_IRQ(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg) -#define wil_dbg_TXRX(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg) -#define wil_dbg_WMI(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg) -#define wil_dbg_MISC(wil, fmt, arg...) wil_dbg(wil, "DBG[MISC]" fmt, ##arg) +#define wil_dbg_irq(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg) +#define wil_dbg_txrx(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg) +#define wil_dbg_wmi(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg) +#define wil_dbg_misc(wil, fmt, arg...) wil_dbg(wil, "DBG[MISC]" fmt, ##arg) -#define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \ +#define wil_hex_dump_txrx(prefix_str, prefix_type, rowsize, \ groupsize, buf, len, ascii) \ wil_print_hex_dump_debug("DBG[TXRX]" prefix_str,\ prefix_type, rowsize, \ groupsize, buf, len, ascii) -#define wil_hex_dump_WMI(prefix_str, prefix_type, rowsize, \ +#define wil_hex_dump_wmi(prefix_str, prefix_type, rowsize, \ groupsize, buf, len, ascii) \ wil_print_hex_dump_debug("DBG[ WMI]" prefix_str,\ prefix_type, rowsize, \ diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index dffb002..91f41a7 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -215,7 +215,7 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) } /* next head */ next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size); - wil_dbg_WMI(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head); + wil_dbg_wmi(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head); /* wait till FW finish with previous command */ for (retry = 5; retry > 0; retry--) { r->tail = ioread32(wil->csr + HOST_MBOX + @@ -236,10 +236,10 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) } cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq); /* set command */ - wil_dbg_WMI(wil, "WMI command 0x%04x [%d]\n", cmdid, len); - wil_hex_dump_WMI("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd, + wil_dbg_wmi(wil, "WMI command 0x%04x [%d]\n", cmdid, len); + wil_hex_dump_wmi("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd, sizeof(cmd), true); - wil_hex_dump_WMI("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf, + wil_hex_dump_wmi("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf, len, true); wil_memcpy_toio_32(dst, &cmd, sizeof(cmd)); wil_memcpy_toio_32(dst + sizeof(cmd), buf, len); @@ -275,7 +275,7 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) struct wmi_ready_event *evt = d; u32 ver = le32_to_cpu(evt->sw_version); - wil_dbg_WMI(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac); + wil_dbg_wmi(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac); if (!is_valid_ether_addr(ndev->dev_addr)) { memcpy(ndev->dev_addr, evt->mac, ETH_ALEN); @@ -288,7 +288,7 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d, int len) { - wil_dbg_WMI(wil, "WMI: FW ready\n"); + wil_dbg_wmi(wil, "WMI: FW ready\n"); set_bit(wil_status_fwready, &wil->status); /* reuse wmi_ready for the firmware ready indication */ @@ -311,11 +311,11 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) u32 d_len = le32_to_cpu(data->info.len); u16 d_status = le16_to_cpu(data->info.status); - wil_dbg_WMI(wil, "MGMT: channel %d MCS %d SNR %d\n", + wil_dbg_wmi(wil, "MGMT: channel %d MCS %d SNR %d\n", data->info.channel, data->info.mcs, data->info.snr); - wil_dbg_WMI(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len, + wil_dbg_wmi(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len, le16_to_cpu(data->info.stype)); - wil_dbg_WMI(wil, "qid %d mid %d cid %d\n", + wil_dbg_wmi(wil, "qid %d mid %d cid %d\n", data->info.qid, data->info.mid, data->info.cid); if (!channel) { @@ -331,13 +331,13 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, u.beacon.variable); - wil_dbg_WMI(wil, "Capability info : 0x%04x\n", cap); + wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid, tsf, cap, bi, ie_buf, ie_len, signal, GFP_KERNEL); if (bss) { - wil_dbg_WMI(wil, "Added BSS %pM\n", + wil_dbg_wmi(wil, "Added BSS %pM\n", rx_mgmt_frame->bssid); cfg80211_put_bss(bss); } else { @@ -353,7 +353,7 @@ static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id, struct wmi_scan_complete_event *data = d; bool aborted = (data->status != 0); - wil_dbg_WMI(wil, "SCAN_COMPLETE(0x%08x)\n", data->status); + wil_dbg_wmi(wil, "SCAN_COMPLETE(0x%08x)\n", data->status); cfg80211_scan_done(wil->scan_request, aborted); wil->scan_request = NULL; } else { @@ -388,9 +388,9 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len) return; } ch = evt->channel + 1; - wil_dbg_WMI(wil, "Connect %pM channel [%d] cid %d\n", + wil_dbg_wmi(wil, "Connect %pM channel [%d] cid %d\n", evt->bssid, ch, evt->cid); - wil_hex_dump_WMI("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1, + wil_hex_dump_wmi("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1, evt->assoc_info, len - sizeof(*evt), true); /* figure out IE's */ @@ -452,7 +452,7 @@ static void wmi_evt_disconnect(struct wil6210_priv *wil, int id, { struct wmi_disconnect_event *evt = d; - wil_dbg_WMI(wil, "Disconnect %pM reason %d proto %d wmi\n", + wil_dbg_wmi(wil, "Disconnect %pM reason %d proto %d wmi\n", evt->bssid, evt->protocol_reason_status, evt->disconnect_reason); @@ -477,7 +477,7 @@ static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len) wil->stats.my_tx_sector = le16_to_cpu(evt->my_tx_sector); wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector); wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector); - wil_dbg_WMI(wil, "Link status, MCS %d TSF 0x%016llx\n" + wil_dbg_wmi(wil, "Link status, MCS %d TSF 0x%016llx\n" "BF status 0x%08x SNR 0x%08x\n" "Tx Tpt %d goodput %d Rx goodput %d\n" "Sectors(rx:tx) my %d:%d peer %d:%d\n", @@ -502,7 +502,7 @@ static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id, struct sk_buff *skb; struct ethhdr *eth; - wil_dbg_WMI(wil, "EAPOL len %d from %pM\n", eapol_len, + wil_dbg_wmi(wil, "EAPOL len %d from %pM\n", eapol_len, evt->src_mac); if (eapol_len > 196) { /* TODO: revisit size limit */ @@ -600,15 +600,15 @@ void wmi_recv_cmd(struct wil6210_priv *wil) iowrite32(0, wil->csr + HOSTADDR(r->tail) + offsetof(struct wil6210_mbox_ring_desc, sync)); /* indicate */ - wil_dbg_WMI(wil, "Mbox evt %04x %04x %04x %02x\n", + wil_dbg_wmi(wil, "Mbox evt %04x %04x %04x %02x\n", le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type), hdr.flags); if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) && (len >= sizeof(struct wil6210_mbox_hdr_wmi))) { - wil_dbg_WMI(wil, "WMI event 0x%04x\n", + wil_dbg_wmi(wil, "WMI event 0x%04x\n", evt->event.wmi.id); } - wil_hex_dump_WMI("evt ", DUMP_PREFIX_OFFSET, 16, 1, + wil_hex_dump_wmi("evt ", DUMP_PREFIX_OFFSET, 16, 1, &evt->event.hdr, sizeof(hdr) + len, true); /* advance tail */ @@ -624,7 +624,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil) { int q = queue_work(wil->wmi_wq, &wil->wmi_event_worker); - wil_dbg_WMI(wil, "queue_work -> %d\n", q); + wil_dbg_wmi(wil, "queue_work -> %d\n", q); } } } @@ -651,7 +651,7 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len, cmdid, reply_id, to_msec); rc = -ETIME; } else { - wil_dbg_WMI(wil, + wil_dbg_wmi(wil, "wmi_call(0x%04x->0x%04x) completed in %d msec\n", cmdid, reply_id, to_msec - jiffies_to_msecs(remain)); @@ -681,7 +681,7 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr) memcpy(cmd.mac, addr, ETH_ALEN); - wil_dbg_WMI(wil, "Set MAC %pM\n", addr); + wil_dbg_wmi(wil, "Set MAC %pM\n", addr); return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd)); } @@ -779,7 +779,7 @@ int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb) skb_set_mac_header(skb, 0); eth = eth_hdr(skb); - wil_dbg_WMI(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest); + wil_dbg_wmi(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest); for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) { if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0) goto found_dest; @@ -894,7 +894,7 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring) vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr); - wil_dbg_MISC(wil, "Rx init: status %d tail 0x%08x\n", + wil_dbg_misc(wil, "Rx init: status %d tail 0x%08x\n", le32_to_cpu(evt.evt.status), vring->hwtail); if (le32_to_cpu(evt.evt.status) != WMI_CFG_RX_CHAIN_SUCCESS) @@ -929,7 +929,7 @@ void wmi_event_flush(struct wil6210_priv *wil) { struct pending_wmi_event *evt, *t; - wil_dbg_WMI(wil, "%s()\n", __func__); + wil_dbg_wmi(wil, "%s()\n", __func__); list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) { list_del(&evt->list); @@ -971,7 +971,7 @@ static void wmi_event_handle(struct wil6210_priv *wil, wmi_evt_call_handler(wil, id, evt_data, len - sizeof(*wmi)); } - wil_dbg_WMI(wil, "Complete WMI 0x%04x\n", id); + wil_dbg_wmi(wil, "Complete WMI 0x%04x\n", id); complete(&wil->wmi_ready); return; } @@ -1036,7 +1036,7 @@ void wmi_connect_worker(struct work_struct *work) return; } - wil_dbg_WMI(wil, "Configure for connection CID %d\n", + wil_dbg_wmi(wil, "Configure for connection CID %d\n", wil->pending_connect_cid); rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, -- cgit v0.10.2 From afda8bb50b950b5ee598e3dd0388b06ad1226eed Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:07 +0200 Subject: wil6210: checkpatch warnings Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 4b48f2e..002851f 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -204,7 +204,6 @@ static int wil_cfg80211_scan(struct wiphy *wiphy, break; default: return -EOPNOTSUPP; - } /* FW don't support scan after connection attempt */ diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 865c33f..dc97e7b 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -52,7 +52,6 @@ static inline void wil_icr_clear(u32 x, void __iomem *addr) { - } #else /* defined(CONFIG_WIL6210_ISR_COR) */ /* configure to Write-1-to-Clear mode */ diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index d160ea8..761c389 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -80,7 +80,7 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid) GFP_KERNEL); break; default: - ; + break; } for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) @@ -357,7 +357,7 @@ static int __wil_up(struct wil6210_priv *wil) wmi_set_channel(wil, channel->hw_value); break; default: - ; + break; } /* MAC address - pre-requisite for other commands */ diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c index 073dc7d..8ce2e33 100644 --- a/drivers/net/wireless/ath/wil6210/netdev.c +++ b/drivers/net/wireless/ath/wil6210/netdev.c @@ -39,8 +39,8 @@ static const struct net_device_ops wil_netdev_ops = { .ndo_open = wil_open, .ndo_stop = wil_stop, .ndo_start_xmit = wil_start_xmit, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, }; void *wil_if_alloc(struct device *dev, void __iomem *csr) diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index f0d0913..48cfa7e 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -758,8 +758,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev) case -ENOMEM: return NETDEV_TX_BUSY; default: - ; /* goto drop; */ - break; + break; /* goto drop; */ } drop: netif_tx_stop_all_queues(ndev); diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 91f41a7..8178cc0 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -188,7 +188,6 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) wil_err(wil, "WMI size too large: %d bytes, max is %d\n", (int)(sizeof(cmd) + len), r->entry_size); return -ERANGE; - } might_sleep(); -- cgit v0.10.2 From 2acb4220b264f9d229db01ccc390b8beb37b55af Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:08 +0200 Subject: wil6210: Never delete Rx chain with firmware Firmware crash on attempt to delete Rx chain. Driver part of Rx chain removed only in preparation for the target reset; as reset is the only flow that removes Rx chain in the firmware. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 48cfa7e..1985951 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -511,10 +511,8 @@ void wil_rx_fini(struct wil6210_priv *wil) { struct vring *vring = &wil->vring_rx; - if (vring->va) { - wmi_rx_chain_del(wil); + if (vring->va) wil_vring_free(wil, vring, 0); - } } int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size, diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 69e5162..aea961f 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -327,7 +327,6 @@ int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index, const void *mac_addr, int key_len, const void *key); int wmi_echo(struct wil6210_priv *wil); int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie); -int wmi_rx_chain_del(struct wil6210_priv *wil); int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring); int wil6210_init_irq(struct wil6210_priv *wil, int irq); diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 8178cc0..0b70e17 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -902,28 +902,6 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring) return rc; } -int wmi_rx_chain_del(struct wil6210_priv *wil) -{ - int rc; - struct wmi_cfg_rx_chain_cmd cmd = { - .action = cpu_to_le32(WMI_RX_CHAIN_DEL), - .rx_sw_ring = { - .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), - }, - }; - struct { - struct wil6210_mbox_hdr_wmi wmi; - struct wmi_cfg_rx_chain_done_event cfg; - } __packed wmi_rx_cfg_reply; - - rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), - WMI_CFG_RX_CHAIN_DONE_EVENTID, - &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply), - 100); - - return rc; -} - void wmi_event_flush(struct wil6210_priv *wil) { struct pending_wmi_event *evt, *t; -- cgit v0.10.2 From c331997b6c9ad7f4b8075e6e60d3caa6e36f5938 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 28 Jan 2013 18:31:09 +0200 Subject: wil6210: fix wil_vring_init_tx status In case vring setup with the firmware failed, success status was returned. fix it. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 1985951..64b971f 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -565,6 +565,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size, if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) { wil_err(wil, "Tx config failed, status 0x%02x\n", reply.cmd.status); + rc = -EINVAL; goto out_free; } vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr); -- cgit v0.10.2 From 409cc1f8a4149c26bbb8e5d3bacb36541ad371e2 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 30 Jan 2013 11:08:11 +0100 Subject: bond: have random dev address by default instead of zeroes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Makes more sense to have randomly generated address by default than to have all zeroes. It also allows user to for example put the bond into bridge without need to have any slaves in it. Also note that this changes only behaviour of bonds with no slaves. Once the first slave device is enslaved, its address will be used (no change here). Also, fix dev_assign_type values on the way. Reported-by: Pavel Šimerda Signed-off-by: Jiri Pirko Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 564cf42..b38c9bf 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1320,14 +1320,15 @@ static void bond_netpoll_cleanup(struct net_device *bond_dev) /*---------------------------------- IOCTL ----------------------------------*/ -static int bond_sethwaddr(struct net_device *bond_dev, - struct net_device *slave_dev) +static void bond_set_dev_addr(struct net_device *bond_dev, + struct net_device *slave_dev) { pr_debug("bond_dev=%p\n", bond_dev); pr_debug("slave_dev=%p\n", slave_dev); pr_debug("slave_dev->addr_len=%d\n", slave_dev->addr_len); memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len); - return 0; + bond_dev->addr_assign_type = NET_ADDR_SET; + call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev); } static netdev_features_t bond_fix_features(struct net_device *dev, @@ -1628,10 +1629,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) /* If this is the first slave, then we need to set the master's hardware * address to be the same as the slave's. */ - if (is_zero_ether_addr(bond->dev->dev_addr)) - memcpy(bond->dev->dev_addr, slave_dev->dev_addr, - slave_dev->addr_len); - + if (bond->dev_addr_from_first) + bond_set_dev_addr(bond->dev, slave_dev); new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL); if (!new_slave) { @@ -2048,12 +2047,8 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) if (bond->slave_cnt == 0) { bond_set_carrier(bond); - - /* if the last slave was removed, zero the mac address - * of the master so it will be set by the application - * to the mac address of the first slave - */ - memset(bond_dev->dev_addr, 0, bond_dev->addr_len); + eth_hw_addr_random(bond_dev); + bond->dev_addr_from_first = true; if (bond_vlan_used(bond)) { pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n", @@ -2234,11 +2229,8 @@ static int bond_release_all(struct net_device *bond_dev) write_lock_bh(&bond->lock); } - /* zero the mac address of the master so it will be - * set by the application to the mac address of the - * first slave - */ - memset(bond_dev->dev_addr, 0, bond_dev->addr_len); + eth_hw_addr_random(bond_dev); + bond->dev_addr_from_first = true; if (bond_vlan_used(bond)) { pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n", @@ -3708,7 +3700,8 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd break; case BOND_SETHWADDR_OLD: case SIOCBONDSETHWADDR: - res = bond_sethwaddr(bond_dev, slave_dev); + bond_set_dev_addr(bond_dev, slave_dev); + res = 0; break; case BOND_CHANGE_ACTIVE_OLD: case SIOCBONDCHANGEACTIVE: @@ -4858,6 +4851,13 @@ static int bond_init(struct net_device *bond_dev) bond_debug_register(bond); + /* Ensure valid dev_addr */ + if (is_zero_ether_addr(bond_dev->dev_addr) && + bond_dev->addr_assign_type == NET_ADDR_PERM) { + eth_hw_addr_random(bond_dev); + bond->dev_addr_from_first = true; + } + __hw_addr_init(&bond->mc_list); return 0; } diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 0d282d2..2baec24 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -248,6 +248,7 @@ struct bonding { /* debugging support via debugfs */ struct dentry *debug_dir; #endif /* CONFIG_DEBUG_FS */ + bool dev_addr_from_first; }; static inline bool bond_vlan_used(struct bonding *bond) -- cgit v0.10.2 From 99cd471423991fe9ba011e8948cdea95f5432338 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 13:52:01 +0100 Subject: iwlwifi: add 7000 series device configuration Add configuration and detection code for the new 7000 series, with 7260 and 3160 devices. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 170ec33..98cb8e8 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -7,6 +7,7 @@ iwlwifi-objs += iwl-notif-wait.o iwlwifi-objs += iwl-eeprom-read.o iwl-eeprom-parse.o iwlwifi-objs += pcie/drv.o pcie/rx.o pcie/tx.o pcie/trans.o iwlwifi-objs += pcie/1000.o pcie/2000.o pcie/5000.o pcie/6000.o +iwlwifi-objs += pcie/7000.o iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += iwl-test.o diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 61a7a35..743b483 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -83,6 +83,7 @@ enum iwl_device_family { IWL_DEVICE_FAMILY_6030, IWL_DEVICE_FAMILY_6050, IWL_DEVICE_FAMILY_6150, + IWL_DEVICE_FAMILY_7000, }; /* diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 39c79ec..f5592fb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -414,6 +414,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) * uCode/driver must write "1" in order to clear this flag */ #define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018) +#define FH_TSSR_TX_MSG_CONFIG_REG (FH_TSSR_LOWER_BOUND + 0x008) #define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index f46a3f2..f76e9ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -97,6 +97,9 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +/* Device system time */ +#define DEVICE_SYSTEM_TIME_REG 0xA0206C + /** * Tx Scheduler * diff --git a/drivers/net/wireless/iwlwifi/pcie/7000.c b/drivers/net/wireless/iwlwifi/pcie/7000.c new file mode 100644 index 0000000..6e35b2b --- /dev/null +++ b/drivers/net/wireless/iwlwifi/pcie/7000.c @@ -0,0 +1,111 @@ +/****************************************************************************** + * + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include +#include +#include "iwl-config.h" +#include "iwl-agn-hw.h" +#include "cfg.h" + +/* Highest firmware API version supported */ +#define IWL7260_UCODE_API_MAX 6 +#define IWL3160_UCODE_API_MAX 6 + +/* Oldest version we won't warn about */ +#define IWL7260_UCODE_API_OK 6 +#define IWL3160_UCODE_API_OK 6 + +/* Lowest firmware API version supported */ +#define IWL7260_UCODE_API_MIN 6 +#define IWL3160_UCODE_API_MIN 6 + +/* NVM versions */ +#define IWL7260_NVM_VERSION 0x0a1d +#define IWL7260_TX_POWER_VERSION 0xffff /* meaningless */ +#define IWL3160_NVM_VERSION 0x709 +#define IWL3160_TX_POWER_VERSION 0xffff /* meaningless */ + +#define IWL7260_FW_PRE "iwlwifi-7260-" +#define IWL7260_MODULE_FIRMWARE(api) IWL7260_FW_PRE __stringify(api) ".ucode" + +#define IWL3160_FW_PRE "iwlwifi-3160-" +#define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode" + +static const struct iwl_base_params iwl7000_base_params = { + .eeprom_size = OTP_LOW_IMAGE_SIZE, + .num_of_queues = IWLAGN_NUM_QUEUES, + .pll_cfg_val = 0, + .shadow_ram_support = true, + .led_compensation = 57, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .wd_timeout = IWL_LONG_WD_TIMEOUT, + .max_event_log_size = 512, + .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ +}; + +static const struct iwl_ht_params iwl7000_ht_params = { + .ht_greenfield_support = true, + .use_rts_for_aggregation = true, /* use rts/cts protection */ + .ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ), +}; + +#define IWL_DEVICE_7000 \ + .ucode_api_max = IWL7260_UCODE_API_MAX, \ + .ucode_api_ok = IWL7260_UCODE_API_OK, \ + .ucode_api_min = IWL7260_UCODE_API_MIN, \ + .device_family = IWL_DEVICE_FAMILY_7000, \ + .max_inst_size = IWL60_RTC_INST_SIZE, \ + .max_data_size = IWL60_RTC_DATA_SIZE, \ + .base_params = &iwl7000_base_params, \ + /* TODO: .bt_params? */ \ + .need_temp_offset_calib = true, \ + .led_mode = IWL_LED_RF_STATE, \ + .adv_pm = true \ + + +const struct iwl_cfg iwl7260_2ac_cfg = { + .name = "Intel(R) Dual Band Wireless AC7260", + .fw_name_pre = IWL7260_FW_PRE, + IWL_DEVICE_7000, + .ht_params = &iwl7000_ht_params, + .nvm_ver = IWL7260_NVM_VERSION, + .nvm_calib_ver = IWL7260_TX_POWER_VERSION, +}; + +const struct iwl_cfg iwl3160_ac_cfg = { + .name = "Intel(R) Dual Band Wireless AC3160", + .fw_name_pre = IWL3160_FW_PRE, + IWL_DEVICE_7000, + .ht_params = &iwl7000_ht_params, + .nvm_ver = IWL3160_NVM_VERSION, + .nvm_calib_ver = IWL3160_TX_POWER_VERSION, +}; + +MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); +MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/pcie/cfg.h b/drivers/net/wireless/iwlwifi/pcie/cfg.h index 3061063..c6f8e83 100644 --- a/drivers/net/wireless/iwlwifi/pcie/cfg.h +++ b/drivers/net/wireless/iwlwifi/pcie/cfg.h @@ -109,5 +109,7 @@ extern const struct iwl_cfg iwl6035_2agn_cfg; extern const struct iwl_cfg iwl105_bgn_cfg; extern const struct iwl_cfg iwl105_bgn_d_cfg; extern const struct iwl_cfg iwl135_bgn_cfg; +extern const struct iwl_cfg iwl7260_2ac_cfg; +extern const struct iwl_cfg iwl3160_ac_cfg; #endif /* __iwl_pci_h__ */ diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 5651d31..7bc0fb9 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -255,6 +255,12 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x0893, 0x0262, iwl135_bgn_cfg)}, {IWL_PCI_DEVICE(0x0892, 0x0462, iwl135_bgn_cfg)}, +/* 7000 Series */ + {IWL_PCI_DEVICE(0x08B1, 0x4070, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC070, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0070, iwl3160_ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8070, iwl3160_ac_cfg)}, + {0} }; MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); -- cgit v0.10.2 From 4a4ee1010dd1e96b6e9a0a5686f2f527385c468e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 14:05:43 +0100 Subject: iwlwifi: clean up CMD_MODE enum Just format the enum better. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index ce878b9..d4ab24b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -193,11 +193,11 @@ struct iwl_rx_packet { * @CMD_ON_DEMAND: This command is sent by the test mode pipe. */ enum CMD_MODE { - CMD_SYNC = 0, - CMD_ASYNC = BIT(0), - CMD_WANT_SKB = BIT(1), - CMD_WANT_HCMD = BIT(2), - CMD_ON_DEMAND = BIT(3), + CMD_SYNC = 0, + CMD_ASYNC = BIT(0), + CMD_WANT_SKB = BIT(1), + CMD_WANT_HCMD = BIT(2), + CMD_ON_DEMAND = BIT(3), }; #define DEF_CMD_PAYLOAD_SIZE 320 -- cgit v0.10.2 From aa2b17708380ca48946a9ad97907f54032cf48fc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 14:12:07 +0100 Subject: iwlwifi: fix calibration parser The firmware TLV for calibration data isn't really a u64, but two u32 values. Define a struct for that and change the parser. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index a7fb5ba..c675196 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -268,7 +268,7 @@ struct fw_sec_parsing { */ struct iwl_tlv_calib_data { __le32 ucode_type; - __le64 calib; + struct iwl_tlv_calib_ctrl calib; } __packed; struct iwl_firmware_pieces { @@ -358,7 +358,11 @@ static int iwl_set_default_calib(struct iwl_drv *drv, const u8 *data) ucode_type); return -EINVAL; } - drv->fw.default_calib[ucode_type] = le64_to_cpu(def_calib->calib); + drv->fw.default_calib[ucode_type].flow_trigger = + def_calib->calib.flow_trigger; + drv->fw.default_calib[ucode_type].event_trigger = + def_calib->calib.event_trigger; + return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 0bc8b6f..1ad31a9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -139,6 +139,19 @@ struct fw_img { #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) +/* + * Calibration control struct. + * Sent as part of the phy configuration command. + * @flow_trigger: bitmap for which calibrations to perform according to + * flow triggers. + * @event_trigger: bitmap for which calibrations to perform according to + * event triggers. + */ +struct iwl_tlv_calib_ctrl { + __le32 flow_trigger; + __le32 event_trigger; +} __packed; + /** * struct iwl_fw - variables associated with the firmware * @@ -168,7 +181,7 @@ struct iwl_fw { u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; - u64 default_calib[IWL_UCODE_TYPE_MAX]; + struct iwl_tlv_calib_ctrl default_calib[IWL_UCODE_TYPE_MAX]; u32 phy_config; bool mvm_fw; -- cgit v0.10.2 From b1e1adfa7d30cd0e8ad9a5c6a89e8c45ebe084f4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 14:14:22 +0100 Subject: iwlwifi: add NVM and PHY DB code for new MVM driver The new MVM (multi-virtual MAC) firmware driver requires NVM (non-volatile memory) parsing code and some PHY information database code. Add this separately. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 98cb8e8..2d4d47a 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -5,6 +5,7 @@ iwlwifi-objs += iwl-drv.o iwlwifi-objs += iwl-debug.o iwlwifi-objs += iwl-notif-wait.o iwlwifi-objs += iwl-eeprom-read.o iwl-eeprom-parse.o +iwlwifi-objs += iwl-phy-db.o iwl-nvm-parse.o iwlwifi-objs += pcie/drv.o pcie/rx.o pcie/tx.o pcie/trans.o iwlwifi-objs += pcie/1000.o pcie/2000.o pcie/5000.o pcie/6000.o iwlwifi-objs += pcie/7000.o diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c index 1ece4c0..034f2ff 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c @@ -703,9 +703,9 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, return n_channels; } -static int iwl_init_sband_channels(struct iwl_nvm_data *data, - struct ieee80211_supported_band *sband, - int n_channels, enum ieee80211_band band) +int iwl_init_sband_channels(struct iwl_nvm_data *data, + struct ieee80211_supported_band *sband, + int n_channels, enum ieee80211_band band) { struct ieee80211_channel *chan = &data->channels[0]; int n = 0, idx = 0; @@ -728,10 +728,10 @@ static int iwl_init_sband_channels(struct iwl_nvm_data *data, #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ -static void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg, - struct iwl_nvm_data *data, - struct ieee80211_sta_ht_cap *ht_info, - enum ieee80211_band band) +void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg, + struct iwl_nvm_data *data, + struct ieee80211_sta_ht_cap *ht_info, + enum ieee80211_band band) { int max_bit_rate = 0; u8 rx_chains; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h index 074cd07..683fe6a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h @@ -126,4 +126,13 @@ static inline void iwl_free_nvm_data(struct iwl_nvm_data *data) int iwl_nvm_check_version(struct iwl_nvm_data *data, struct iwl_trans *trans); +int iwl_init_sband_channels(struct iwl_nvm_data *data, + struct ieee80211_supported_band *sband, + int n_channels, enum ieee80211_band band); + +void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg, + struct iwl_nvm_data *data, + struct ieee80211_sta_ht_cap *ht_info, + enum ieee80211_band band); + #endif /* __iwl_eeprom_parse_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c new file mode 100644 index 0000000..a70213b --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -0,0 +1,346 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#include +#include +#include +#include "iwl-modparams.h" +#include "iwl-nvm-parse.h" + +/* NVM offsets (in words) definitions */ +enum wkp_nvm_offsets { + /* NVM HW-Section offset (in words) definitions */ + HW_ADDR = 0x15, + +/* NVM SW-Section offset (in words) definitions */ + NVM_SW_SECTION = 0x1C0, + NVM_VERSION = 0, + RADIO_CFG = 1, + SKU = 2, + N_HW_ADDRS = 3, + NVM_CHANNELS = 0x1E0 - NVM_SW_SECTION, + +/* NVM calibration section offset (in words) definitions */ + NVM_CALIB_SECTION = 0x2B8, + XTAL_CALIB = 0x316 - NVM_CALIB_SECTION +}; + +/* SKU Capabilities (actual values from NVM definition) */ +enum nvm_sku_bits { + NVM_SKU_CAP_BAND_24GHZ = BIT(0), + NVM_SKU_CAP_BAND_52GHZ = BIT(1), + NVM_SKU_CAP_11N_ENABLE = BIT(2), +}; + +/* radio config bits (actual values from NVM definition) */ +#define NVM_RF_CFG_DASH_MSK(x) (x & 0x3) /* bits 0-1 */ +#define NVM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ +#define NVM_RF_CFG_TYPE_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ +#define NVM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ +#define NVM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ +#define NVM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ + +/* + * These are the channel numbers in the order that they are stored in the NVM + */ +static const u8 iwl_nvm_channels[] = { + /* 2.4 GHz */ + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + /* 5 GHz */ + 36, 40, 44 , 48, 52, 56, 60, 64, + 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, + 149, 153, 157, 161, 165 +}; + +#define IWL_NUM_CHANNELS ARRAY_SIZE(iwl_nvm_channels) +#define NUM_2GHZ_CHANNELS 14 +#define FIRST_2GHZ_HT_MINUS 5 +#define LAST_2GHZ_HT_PLUS 9 +#define LAST_5GHZ_HT 161 + + +/* rate data (static) */ +static struct ieee80211_rate iwl_cfg80211_rates[] = { + { .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, }, + { .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, }, + { .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, }, + { .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, }, + { .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, }, + { .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, }, + { .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, }, + { .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, }, + { .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, }, +}; +#define RATES_24_OFFS 0 +#define N_RATES_24 ARRAY_SIZE(iwl_cfg80211_rates) +#define RATES_52_OFFS 4 +#define N_RATES_52 (N_RATES_24 - RATES_52_OFFS) + +/** + * enum iwl_nvm_channel_flags - channel flags in NVM + * @NVM_CHANNEL_VALID: channel is usable for this SKU/geo + * @NVM_CHANNEL_IBSS: usable as an IBSS channel + * @NVM_CHANNEL_ACTIVE: active scanning allowed + * @NVM_CHANNEL_RADAR: radar detection required + * @NVM_CHANNEL_DFS: dynamic freq selection candidate + * @NVM_CHANNEL_WIDE: 20 MHz channel okay (?) + * @NVM_CHANNEL_40MHZ: 40 MHz channel okay (?) + */ +enum iwl_nvm_channel_flags { + NVM_CHANNEL_VALID = BIT(0), + NVM_CHANNEL_IBSS = BIT(1), + NVM_CHANNEL_ACTIVE = BIT(3), + NVM_CHANNEL_RADAR = BIT(4), + NVM_CHANNEL_DFS = BIT(7), + NVM_CHANNEL_WIDE = BIT(8), + NVM_CHANNEL_40MHZ = BIT(9), +}; + +#define CHECK_AND_PRINT_I(x) \ + ((ch_flags & NVM_CHANNEL_##x) ? # x " " : "") + +static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, + struct iwl_nvm_data *data, + const __le16 * const nvm_ch_flags) +{ + int ch_idx; + int n_channels = 0; + struct ieee80211_channel *channel; + u16 ch_flags; + bool is_5ghz; + + for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) { + ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx); + if (!(ch_flags & NVM_CHANNEL_VALID)) { + IWL_DEBUG_EEPROM(dev, + "Ch. %d Flags %x [%sGHz] - No traffic\n", + iwl_nvm_channels[ch_idx], + ch_flags, + (ch_idx >= NUM_2GHZ_CHANNELS) ? + "5.2" : "2.4"); + continue; + } + + channel = &data->channels[n_channels]; + n_channels++; + + channel->hw_value = iwl_nvm_channels[ch_idx]; + channel->band = (ch_idx < NUM_2GHZ_CHANNELS) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; + channel->center_freq = + ieee80211_channel_to_frequency( + channel->hw_value, channel->band); + + /* TODO: Need to be dependent to the NVM */ + channel->flags = IEEE80211_CHAN_NO_HT40; + if (ch_idx < NUM_2GHZ_CHANNELS && + (ch_flags & NVM_CHANNEL_40MHZ)) { + if (iwl_nvm_channels[ch_idx] <= LAST_2GHZ_HT_PLUS) + channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; + if (iwl_nvm_channels[ch_idx] >= FIRST_2GHZ_HT_MINUS) + channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; + } else if (iwl_nvm_channels[ch_idx] <= LAST_5GHZ_HT && + (ch_flags & NVM_CHANNEL_40MHZ)) { + if ((ch_idx - NUM_2GHZ_CHANNELS) % 2 == 0) + channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; + else + channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; + } + + if (!(ch_flags & NVM_CHANNEL_IBSS)) + channel->flags |= IEEE80211_CHAN_NO_IBSS; + + if (!(ch_flags & NVM_CHANNEL_ACTIVE)) + channel->flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + if (ch_flags & NVM_CHANNEL_RADAR) + channel->flags |= IEEE80211_CHAN_RADAR; + + /* Initialize regulatory-based run-time data */ + + /* TODO: read the real value from the NVM */ + channel->max_power = 0; + is_5ghz = channel->band == IEEE80211_BAND_5GHZ; + IWL_DEBUG_EEPROM(dev, + "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + channel->hw_value, + is_5ghz ? "5.2" : "2.4", + CHECK_AND_PRINT_I(VALID), + CHECK_AND_PRINT_I(IBSS), + CHECK_AND_PRINT_I(ACTIVE), + CHECK_AND_PRINT_I(RADAR), + CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(DFS), + ch_flags, + channel->max_power, + ((ch_flags & NVM_CHANNEL_IBSS) && + !(ch_flags & NVM_CHANNEL_RADAR)) + ? "" : "not "); + } + + return n_channels; +} + +static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg, + struct iwl_nvm_data *data, const __le16 *nvm_sw) +{ + int n_channels = iwl_init_channel_map(dev, cfg, data, + &nvm_sw[NVM_CHANNELS]); + int n_used = 0; + struct ieee80211_supported_band *sband; + + sband = &data->bands[IEEE80211_BAND_2GHZ]; + sband->band = IEEE80211_BAND_2GHZ; + sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS]; + sband->n_bitrates = N_RATES_24; + n_used += iwl_init_sband_channels(data, sband, n_channels, + IEEE80211_BAND_2GHZ); + iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_2GHZ); + + sband = &data->bands[IEEE80211_BAND_5GHZ]; + sband->band = IEEE80211_BAND_5GHZ; + sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS]; + sband->n_bitrates = N_RATES_52; + n_used += iwl_init_sband_channels(data, sband, n_channels, + IEEE80211_BAND_5GHZ); + iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_5GHZ); + + if (n_channels != n_used) + IWL_ERR_DEV(dev, "NVM: used only %d of %d channels\n", + n_used, n_channels); +} + +struct iwl_nvm_data * +iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg, + const __le16 *nvm_hw, const __le16 *nvm_sw, + const __le16 *nvm_calib) +{ + struct iwl_nvm_data *data; + u8 hw_addr[ETH_ALEN]; + u16 radio_cfg, sku; + + data = kzalloc(sizeof(*data) + + sizeof(struct ieee80211_channel) * IWL_NUM_CHANNELS, + GFP_KERNEL); + if (!data) + return NULL; + + data->nvm_version = le16_to_cpup(nvm_sw + NVM_VERSION); + + radio_cfg = le16_to_cpup(nvm_sw + RADIO_CFG); + data->radio_cfg_type = NVM_RF_CFG_TYPE_MSK(radio_cfg); + data->radio_cfg_step = NVM_RF_CFG_STEP_MSK(radio_cfg); + data->radio_cfg_dash = NVM_RF_CFG_DASH_MSK(radio_cfg); + data->radio_cfg_pnum = NVM_RF_CFG_PNUM_MSK(radio_cfg); + data->valid_tx_ant = NVM_RF_CFG_TX_ANT_MSK(radio_cfg); + data->valid_rx_ant = NVM_RF_CFG_RX_ANT_MSK(radio_cfg); + + sku = le16_to_cpup(nvm_sw + SKU); + data->sku_cap_band_24GHz_enable = sku & NVM_SKU_CAP_BAND_24GHZ; + data->sku_cap_band_52GHz_enable = sku & NVM_SKU_CAP_BAND_52GHZ; + data->sku_cap_11n_enable = sku & NVM_SKU_CAP_11N_ENABLE; + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL) + data->sku_cap_11n_enable = false; + + /* check overrides (some devices have wrong NVM) */ + if (cfg->valid_tx_ant) + data->valid_tx_ant = cfg->valid_tx_ant; + if (cfg->valid_rx_ant) + data->valid_rx_ant = cfg->valid_rx_ant; + + if (!data->valid_tx_ant || !data->valid_rx_ant) { + IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n", + data->valid_tx_ant, data->valid_rx_ant); + kfree(data); + return NULL; + } + + data->n_hw_addrs = le16_to_cpup(nvm_sw + N_HW_ADDRS); + + data->xtal_calib[0] = *(nvm_calib + XTAL_CALIB); + data->xtal_calib[1] = *(nvm_calib + XTAL_CALIB + 1); + + /* The byte order is little endian 16 bit, meaning 214365 */ + memcpy(hw_addr, nvm_hw + HW_ADDR, ETH_ALEN); + data->hw_addr[0] = hw_addr[1]; + data->hw_addr[1] = hw_addr[0]; + data->hw_addr[2] = hw_addr[3]; + data->hw_addr[3] = hw_addr[2]; + data->hw_addr[4] = hw_addr[5]; + data->hw_addr[5] = hw_addr[4]; + + iwl_init_sbands(dev, cfg, data, nvm_sw); + + data->calib_version = 255; /* TODO: + this value will prevent some checks from + failing, we need to check if this + field is still needed, and if it does, + where is it in the NVM*/ + + return data; +} +EXPORT_SYMBOL_GPL(iwl_parse_nvm_data); diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h new file mode 100644 index 0000000..b2692bd --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.h @@ -0,0 +1,80 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#ifndef __iwl_nvm_parse_h__ +#define __iwl_nvm_parse_h__ + +#include "iwl-eeprom-parse.h" + +/** + * iwl_parse_nvm_data - parse NVM data and return values + * + * This function parses all NVM values we need and then + * returns a (newly allocated) struct containing all the + * relevant values for driver use. The struct must be freed + * later with iwl_free_nvm_data(). + */ +struct iwl_nvm_data * +iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg, + const __le16 *nvm_hw, const __le16 *nvm_sw, + const __le16 *nvm_calib); + +#endif /* __iwl_nvm_parse_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/iwlwifi/iwl-phy-db.c new file mode 100644 index 0000000..14fc8d3 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-phy-db.c @@ -0,0 +1,514 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include +#include + +#include "iwl-phy-db.h" +#include "iwl-debug.h" +#include "iwl-op-mode.h" +#include "iwl-trans.h" + +#define CHANNEL_NUM_SIZE 4 /* num of channels in calib_ch size */ +#define IWL_NUM_PAPD_CH_GROUPS 4 +#define IWL_NUM_TXP_CH_GROUPS 9 + +struct iwl_phy_db_entry { + u16 size; + u8 *data; +}; + +/** + * struct iwl_phy_db - stores phy configuration and calibration data. + * + * @cfg: phy configuration. + * @calib_nch: non channel specific calibration data. + * @calib_ch: channel specific calibration data. + * @calib_ch_group_papd: calibration data related to papd channel group. + * @calib_ch_group_txp: calibration data related to tx power chanel group. + */ +struct iwl_phy_db { + struct iwl_phy_db_entry cfg; + struct iwl_phy_db_entry calib_nch; + struct iwl_phy_db_entry calib_ch; + struct iwl_phy_db_entry calib_ch_group_papd[IWL_NUM_PAPD_CH_GROUPS]; + struct iwl_phy_db_entry calib_ch_group_txp[IWL_NUM_TXP_CH_GROUPS]; + + u32 channel_num; + u32 channel_size; + + struct iwl_trans *trans; +}; + +enum iwl_phy_db_section_type { + IWL_PHY_DB_CFG = 1, + IWL_PHY_DB_CALIB_NCH, + IWL_PHY_DB_CALIB_CH, + IWL_PHY_DB_CALIB_CHG_PAPD, + IWL_PHY_DB_CALIB_CHG_TXP, + IWL_PHY_DB_MAX +}; + +#define PHY_DB_CMD 0x6c /* TEMP API - The actual is 0x8c */ + +/* + * phy db - configure operational ucode + */ +struct iwl_phy_db_cmd { + __le16 type; + __le16 length; + u8 data[]; +} __packed; + +/* for parsing of tx power channel group data that comes from the firmware*/ +struct iwl_phy_db_chg_txp { + __le32 space; + __le16 max_channel_idx; +} __packed; + +/* + * phy db - Receieve phy db chunk after calibrations + */ +struct iwl_calib_res_notif_phy_db { + __le16 type; + __le16 length; + u8 data[]; +} __packed; + +#define IWL_PHY_DB_STATIC_PIC cpu_to_le32(0x21436587) +static inline void iwl_phy_db_test_pic(__le32 pic) +{ + WARN_ON(IWL_PHY_DB_STATIC_PIC != pic); +} + +struct iwl_phy_db *iwl_phy_db_init(struct iwl_trans *trans) +{ + struct iwl_phy_db *phy_db = kzalloc(sizeof(struct iwl_phy_db), + GFP_KERNEL); + + if (!phy_db) + return phy_db; + + phy_db->trans = trans; + + /* TODO: add default values of the phy db. */ + return phy_db; +} +EXPORT_SYMBOL(iwl_phy_db_init); + +/* + * get phy db section: returns a pointer to a phy db section specified by + * type and channel group id. + */ +static struct iwl_phy_db_entry * +iwl_phy_db_get_section(struct iwl_phy_db *phy_db, + enum iwl_phy_db_section_type type, + u16 chg_id) +{ + if (!phy_db || type >= IWL_PHY_DB_MAX) + return NULL; + + switch (type) { + case IWL_PHY_DB_CFG: + return &phy_db->cfg; + case IWL_PHY_DB_CALIB_NCH: + return &phy_db->calib_nch; + case IWL_PHY_DB_CALIB_CH: + return &phy_db->calib_ch; + case IWL_PHY_DB_CALIB_CHG_PAPD: + if (chg_id >= IWL_NUM_PAPD_CH_GROUPS) + return NULL; + return &phy_db->calib_ch_group_papd[chg_id]; + case IWL_PHY_DB_CALIB_CHG_TXP: + if (chg_id >= IWL_NUM_TXP_CH_GROUPS) + return NULL; + return &phy_db->calib_ch_group_txp[chg_id]; + default: + return NULL; + } + return NULL; +} + +static void iwl_phy_db_free_section(struct iwl_phy_db *phy_db, + enum iwl_phy_db_section_type type, + u16 chg_id) +{ + struct iwl_phy_db_entry *entry = + iwl_phy_db_get_section(phy_db, type, chg_id); + if (!entry) + return; + + kfree(entry->data); + entry->data = NULL; + entry->size = 0; +} + +void iwl_phy_db_free(struct iwl_phy_db *phy_db) +{ + int i; + + if (!phy_db) + return; + + iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CFG, 0); + iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_NCH, 0); + iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CH, 0); + for (i = 0; i < IWL_NUM_PAPD_CH_GROUPS; i++) + iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CHG_PAPD, i); + for (i = 0; i < IWL_NUM_TXP_CH_GROUPS; i++) + iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CHG_TXP, i); + + kfree(phy_db); +} +EXPORT_SYMBOL(iwl_phy_db_free); + +int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt, + gfp_t alloc_ctx) +{ + struct iwl_calib_res_notif_phy_db *phy_db_notif = + (struct iwl_calib_res_notif_phy_db *)pkt->data; + enum iwl_phy_db_section_type type = le16_to_cpu(phy_db_notif->type); + u16 size = le16_to_cpu(phy_db_notif->length); + struct iwl_phy_db_entry *entry; + u16 chg_id = 0; + + if (!phy_db) + return -EINVAL; + + if (type == IWL_PHY_DB_CALIB_CHG_PAPD || + type == IWL_PHY_DB_CALIB_CHG_TXP) + chg_id = le16_to_cpup((__le16 *)phy_db_notif->data); + + entry = iwl_phy_db_get_section(phy_db, type, chg_id); + if (!entry) + return -EINVAL; + + kfree(entry->data); + entry->data = kmemdup(phy_db_notif->data, size, alloc_ctx); + if (!entry->data) { + entry->size = 0; + return -ENOMEM; + } + + entry->size = size; + + if (type == IWL_PHY_DB_CALIB_CH) { + phy_db->channel_num = + le32_to_cpup((__le32 *)phy_db_notif->data); + phy_db->channel_size = + (size - CHANNEL_NUM_SIZE) / phy_db->channel_num; + } + + /* Test PIC */ + if (type != IWL_PHY_DB_CFG) + iwl_phy_db_test_pic(*(((__le32 *)phy_db_notif->data) + + (size / sizeof(__le32)) - 1)); + + IWL_DEBUG_INFO(phy_db->trans, + "%s(%d): [PHYDB]SET: Type %d , Size: %d\n", + __func__, __LINE__, type, size); + + return 0; +} +EXPORT_SYMBOL(iwl_phy_db_set_section); + +static int is_valid_channel(u16 ch_id) +{ + if (ch_id <= 14 || + (36 <= ch_id && ch_id <= 64 && ch_id % 4 == 0) || + (100 <= ch_id && ch_id <= 140 && ch_id % 4 == 0) || + (145 <= ch_id && ch_id <= 165 && ch_id % 4 == 1)) + return 1; + return 0; +} + +static u8 ch_id_to_ch_index(u16 ch_id) +{ + if (WARN_ON(!is_valid_channel(ch_id))) + return 0xff; + + if (ch_id <= 14) + return ch_id - 1; + if (ch_id <= 64) + return (ch_id + 20) / 4; + if (ch_id <= 140) + return (ch_id - 12) / 4; + return (ch_id - 13) / 4; +} + + +static u16 channel_id_to_papd(u16 ch_id) +{ + if (WARN_ON(!is_valid_channel(ch_id))) + return 0xff; + + if (1 <= ch_id && ch_id <= 14) + return 0; + if (36 <= ch_id && ch_id <= 64) + return 1; + if (100 <= ch_id && ch_id <= 140) + return 2; + return 3; +} + +static u16 channel_id_to_txp(struct iwl_phy_db *phy_db, u16 ch_id) +{ + struct iwl_phy_db_chg_txp *txp_chg; + int i; + u8 ch_index = ch_id_to_ch_index(ch_id); + if (ch_index == 0xff) + return 0xff; + + for (i = 0; i < IWL_NUM_TXP_CH_GROUPS; i++) { + txp_chg = (void *)phy_db->calib_ch_group_txp[i].data; + if (!txp_chg) + return 0xff; + /* + * Looking for the first channel group that its max channel is + * higher then wanted channel. + */ + if (le16_to_cpu(txp_chg->max_channel_idx) >= ch_index) + return i; + } + return 0xff; +} +static +int iwl_phy_db_get_section_data(struct iwl_phy_db *phy_db, + u32 type, u8 **data, u16 *size, u16 ch_id) +{ + struct iwl_phy_db_entry *entry; + u32 channel_num; + u32 channel_size; + u16 ch_group_id = 0; + u16 index; + + if (!phy_db) + return -EINVAL; + + /* find wanted channel group */ + if (type == IWL_PHY_DB_CALIB_CHG_PAPD) + ch_group_id = channel_id_to_papd(ch_id); + else if (type == IWL_PHY_DB_CALIB_CHG_TXP) + ch_group_id = channel_id_to_txp(phy_db, ch_id); + + entry = iwl_phy_db_get_section(phy_db, type, ch_group_id); + if (!entry) + return -EINVAL; + + if (type == IWL_PHY_DB_CALIB_CH) { + index = ch_id_to_ch_index(ch_id); + channel_num = phy_db->channel_num; + channel_size = phy_db->channel_size; + if (index >= channel_num) { + IWL_ERR(phy_db->trans, "Wrong channel number %d\n", + ch_id); + return -EINVAL; + } + *data = entry->data + CHANNEL_NUM_SIZE + index * channel_size; + *size = channel_size; + } else { + *data = entry->data; + *size = entry->size; + } + + /* Test PIC */ + if (type != IWL_PHY_DB_CFG) + iwl_phy_db_test_pic(*(((__le32 *)*data) + + (*size / sizeof(__le32)) - 1)); + + IWL_DEBUG_INFO(phy_db->trans, + "%s(%d): [PHYDB] GET: Type %d , Size: %d\n", + __func__, __LINE__, type, *size); + + return 0; +} + +static int iwl_send_phy_db_cmd(struct iwl_phy_db *phy_db, u16 type, + u16 length, void *data) +{ + struct iwl_phy_db_cmd phy_db_cmd; + struct iwl_host_cmd cmd = { + .id = PHY_DB_CMD, + .flags = CMD_SYNC, + }; + + IWL_DEBUG_INFO(phy_db->trans, + "Sending PHY-DB hcmd of type %d, of length %d\n", + type, length); + + /* Set phy db cmd variables */ + phy_db_cmd.type = cpu_to_le16(type); + phy_db_cmd.length = cpu_to_le16(length); + + /* Set hcmd variables */ + cmd.data[0] = &phy_db_cmd; + cmd.len[0] = sizeof(struct iwl_phy_db_cmd); + cmd.data[1] = data; + cmd.len[1] = length; + cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; + + return iwl_trans_send_cmd(phy_db->trans, &cmd); +} + +static int iwl_phy_db_send_all_channel_groups( + struct iwl_phy_db *phy_db, + enum iwl_phy_db_section_type type, + u8 max_ch_groups) +{ + u16 i; + int err; + struct iwl_phy_db_entry *entry; + + /* Send all the channel specific groups to operational fw */ + for (i = 0; i < max_ch_groups; i++) { + entry = iwl_phy_db_get_section(phy_db, + type, + i); + if (!entry) + return -EINVAL; + + /* Send the requested PHY DB section */ + err = iwl_send_phy_db_cmd(phy_db, + type, + entry->size, + entry->data); + if (err) { + IWL_ERR(phy_db->trans, + "Can't SEND phy_db section %d (%d), err %d", + type, i, err); + return err; + } + + IWL_DEBUG_INFO(phy_db->trans, + "Sent PHY_DB HCMD, type = %d num = %d", + type, i); + } + + return 0; +} + +int iwl_send_phy_db_data(struct iwl_phy_db *phy_db) +{ + u8 *data = NULL; + u16 size = 0; + int err; + + IWL_DEBUG_INFO(phy_db->trans, + "Sending phy db data and configuration to runtime image\n"); + + /* Send PHY DB CFG section */ + err = iwl_phy_db_get_section_data(phy_db, IWL_PHY_DB_CFG, + &data, &size, 0); + if (err) { + IWL_ERR(phy_db->trans, "Cannot get Phy DB cfg section\n"); + return err; + } + + err = iwl_send_phy_db_cmd(phy_db, IWL_PHY_DB_CFG, size, data); + if (err) { + IWL_ERR(phy_db->trans, + "Cannot send HCMD of Phy DB cfg section\n"); + return err; + } + + err = iwl_phy_db_get_section_data(phy_db, IWL_PHY_DB_CALIB_NCH, + &data, &size, 0); + if (err) { + IWL_ERR(phy_db->trans, + "Cannot get Phy DB non specific channel section\n"); + return err; + } + + err = iwl_send_phy_db_cmd(phy_db, IWL_PHY_DB_CALIB_NCH, size, data); + if (err) { + IWL_ERR(phy_db->trans, + "Cannot send HCMD of Phy DB non specific channel section\n"); + return err; + } + + /* Send all the TXP channel specific data */ + err = iwl_phy_db_send_all_channel_groups(phy_db, + IWL_PHY_DB_CALIB_CHG_PAPD, + IWL_NUM_PAPD_CH_GROUPS); + if (err) { + IWL_ERR(phy_db->trans, + "Cannot send channel specific PAPD groups"); + return err; + } + + /* Send all the TXP channel specific data */ + err = iwl_phy_db_send_all_channel_groups(phy_db, + IWL_PHY_DB_CALIB_CHG_TXP, + IWL_NUM_TXP_CH_GROUPS); + if (err) { + IWL_ERR(phy_db->trans, + "Cannot send channel specific TX power groups"); + return err; + } + + IWL_DEBUG_INFO(phy_db->trans, + "Finished sending phy db non channel data\n"); + return 0; +} +EXPORT_SYMBOL(iwl_send_phy_db_data); diff --git a/drivers/net/wireless/iwlwifi/iwl-phy-db.h b/drivers/net/wireless/iwlwifi/iwl-phy-db.h new file mode 100644 index 0000000..d0e43d9 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-phy-db.h @@ -0,0 +1,82 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __IWL_PHYDB_H__ +#define __IWL_PHYDB_H__ + +#include + +#include "iwl-op-mode.h" +#include "iwl-trans.h" + +struct iwl_phy_db *iwl_phy_db_init(struct iwl_trans *trans); + +void iwl_phy_db_free(struct iwl_phy_db *phy_db); + +int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt, + gfp_t alloc_ctx); + + +int iwl_send_phy_db_data(struct iwl_phy_db *phy_db); + +#endif /* __IWL_PHYDB_H__ */ -- cgit v0.10.2 From 069048f18bc51fbfd08d2e08a9003c2681ce44dd Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Wed, 30 Jan 2013 12:47:12 +0000 Subject: qlcnic: Fix sparse check endian warnings Signed-off-by: Shahed Shaikh Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index fdf3483..d00f628 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1018,7 +1018,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, skb->protocol = eth_type_trans(skb, netdev); - if (htons(skb->protocol) == ETH_P_IPV6) { + if (ntohs(skb->protocol) == ETH_P_IPV6) { ipv6h = (struct ipv6hdr *)skb->data; th = (struct tcphdr *)(skb->data + sizeof(struct ipv6hdr)); length = (th->doff << 2) + lro_length; -- cgit v0.10.2 From 1403f43a8fc8b1e1880b08a4c8a4ddac985171eb Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Wed, 30 Jan 2013 12:47:13 +0000 Subject: qlcnic: Fix bug in reading HW reset template Signed-off-by: Manish chopra Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 46162f8..1e81e94 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2374,7 +2374,7 @@ int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, if (ret == -EIO) return -EIO; word = ret; - *p_data = word; + *(u32 *)p_data = word; p_data = p_data + 4; addr = addr + 4; } -- cgit v0.10.2 From cdc84dda1e0214960df14aaee6708993b40e28f0 Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Wed, 30 Jan 2013 12:47:14 +0000 Subject: qlcnic: Free irq for mailbox interrupts Signed-off-by: Manish chopra Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index e6b363a..987c46d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3215,7 +3215,7 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data, size_t len) if (netif_running(netdev)) __qlcnic_down(adapter, netdev); - if (qlcnic_82xx_check(adapter)) { + if (qlcnic_83xx_check(adapter)) { if (adapter->flags & QLCNIC_MSIX_ENABLED) qlcnic_83xx_config_intrpt(adapter, 0); qlcnic_83xx_free_mbx_intr(adapter); -- cgit v0.10.2 From 283c1c687051241e644af57bef7b6532cd65118a Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Wed, 30 Jan 2013 12:47:15 +0000 Subject: qlcnic: driver LRO bug fix o ipv4 address was not getting programmed properly because of improper byte order conversion Signed-off-by: Manish chopra Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 1e81e94..65233c8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1399,7 +1399,7 @@ void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, int mode) { int err; - u32 temp; + u32 temp, temp_ip; struct qlcnic_cmd_args cmd; qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_IP_ADDR); @@ -1410,8 +1410,17 @@ void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, temp = adapter->recv_ctx->context_id << 16; cmd.req.arg[1] = 2 | temp; } - cmd.req.arg[2] = ntohl(ip); + /* + * Adapter needs IP address in network byte order. + * But hardware mailbox registers go through writel(), hence IP address + * gets swapped on big endian architecture. + * To negate swapping of writel() on big endian architecture + * use swab32(value). + */ + + temp_ip = swab32(ntohl(ip)); + memcpy(&cmd.req.arg[2], &temp_ip, sizeof(u32)); err = qlcnic_issue_cmd(adapter, &cmd); if (err != QLCNIC_RCODE_SUCCESS) dev_err(&adapter->netdev->dev, @@ -1425,13 +1434,16 @@ int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *adapter, int mode) int err; u32 temp, arg1; struct qlcnic_cmd_args cmd; + int lro_bit_mask; + + lro_bit_mask = (mode ? (BIT_0 | BIT_1 | BIT_2 | BIT_3) : 0); if (adapter->recv_ctx->state == QLCNIC_HOST_CTX_STATE_FREED) return 0; qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_HW_LRO); temp = adapter->recv_ctx->context_id << 16; - arg1 = (mode ? (BIT_0 | BIT_1 | BIT_3) : 0) | temp; + arg1 = lro_bit_mask | temp; cmd.req.arg[1] = arg1; err = qlcnic_issue_cmd(adapter, &cmd); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 6c6ecfc..4e4ebaf 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -958,8 +958,10 @@ int qlcnic_set_features(struct net_device *netdev, netdev_features_t features) if (qlcnic_config_hw_lro(adapter, hw_lro)) return -EIO; - if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter)) - return -EIO; + if (!hw_lro && qlcnic_82xx_check(adapter)) { + if (qlcnic_send_lro_cleanup(adapter)) + return -EIO; + } return 0; } -- cgit v0.10.2 From 4d53f40f541ab29c15982774abddbad4c361cc8c Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Wed, 30 Jan 2013 12:47:16 +0000 Subject: qlcnic: Fix minidump in NPAR mode Signed-off-by: Shahed Shaikh Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c index d394471..b3ef33a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c @@ -98,6 +98,7 @@ static int qlcnic_83xx_init_mgmt_vnic(struct qlcnic_adapter *adapter) { int err = -EIO; + qlcnic_83xx_get_minidump_template(adapter); if (!(adapter->flags & QLCNIC_ADAPTER_INITIALIZED)) { if (qlcnic_init_pci_info(adapter)) return err; @@ -130,6 +131,7 @@ static int qlcnic_83xx_init_privileged_vnic(struct qlcnic_adapter *adapter) { int err = -EIO; + qlcnic_83xx_get_minidump_template(adapter); if (qlcnic_83xx_get_port_info(adapter)) return err; -- cgit v0.10.2 From 22fd5ab4623883ea895e48b1288f97856294d17d Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Wed, 30 Jan 2013 12:47:17 +0000 Subject: qlcnic: Fix RX/TX checksum setting for some adapter types Signed-off-by: Manish chopra Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 4e4ebaf..88a2330 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -932,7 +932,8 @@ netdev_features_t qlcnic_fix_features(struct net_device *netdev, { struct qlcnic_adapter *adapter = netdev_priv(netdev); - if ((adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) && + qlcnic_82xx_check(adapter)) { netdev_features_t changed = features ^ netdev->features; features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM); } -- cgit v0.10.2 From fec9dd15d5bbea28297a53b138ed990e1bd48559 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 30 Jan 2013 12:47:18 +0000 Subject: qlcnic: make pci_error_handlers const Signed-off-by: Stephen Hemminger Signed-off-by: Bjorn Helgaas Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 987c46d..f3deef0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3395,7 +3395,7 @@ static struct notifier_block qlcnic_inetaddr_cb = { void qlcnic_restore_indev_addr(struct net_device *dev, unsigned long event) { } #endif -static struct pci_error_handlers qlcnic_err_handler = { +static const struct pci_error_handlers qlcnic_err_handler = { .error_detected = qlcnic_io_error_detected, .slot_reset = qlcnic_io_slot_reset, .resume = qlcnic_io_resume, -- cgit v0.10.2 From 45acd3a0a18c5692b34ee9091858c6f6c7b5d4a8 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Wed, 30 Jan 2013 12:47:19 +0000 Subject: qlcnic: Bump up the version to 5.1.33 Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index f71aef5..457ca8e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -38,8 +38,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 1 -#define _QLCNIC_LINUX_SUBVERSION 32 -#define QLCNIC_LINUX_VERSIONID "5.1.32" +#define _QLCNIC_LINUX_SUBVERSION 33 +#define QLCNIC_LINUX_VERSIONID "5.1.33" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v0.10.2 From 3b58908a92e00840bcd9050808f3dc86fd547029 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Jan 2013 17:51:44 -0800 Subject: x86: bpf_jit_comp: add pkt_type support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Supporting access to skb->pkt_type is a bit tricky if we want to have a generic code, allowing pkt_type to be moved in struct sk_buff pkt_type is a bit field, so compiler cannot really help us to find its offset. Let's use a helper for this : It will throw a one time message if pkt_type no longer starts at a byte boundary or is no longer a 3bit field. Reported-by: Willem de Bruijn Signed-off-by: Eric Dumazet Cc: Maciej Żenczykowski Signed-off-by: David S. Miller diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index d11a470..3cbe4538 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1,6 +1,6 @@ /* bpf_jit_comp.c : BPF JIT compiler * - * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com) + * Copyright (C) 2011-2013 Eric Dumazet (eric.dumazet@gmail.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -124,6 +124,26 @@ static inline void bpf_flush_icache(void *start, void *end) #define CHOOSE_LOAD_FUNC(K, func) \ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset) +/* Helper to find the offset of pkt_type in sk_buff + * We want to make sure its still a 3bit field starting at a byte boundary. + */ +#define PKT_TYPE_MAX 7 +static int pkt_type_offset(void) +{ + struct sk_buff skb_probe = { + .pkt_type = ~0, + }; + char *ct = (char *)&skb_probe; + unsigned int off; + + for (off = 0; off < sizeof(struct sk_buff); off++) { + if (ct[off] == PKT_TYPE_MAX) + return off; + } + pr_err_once("Please fix pkt_type_offset(), as pkt_type couldn't be found\n"); + return -1; +} + void bpf_jit_compile(struct sk_filter *fp) { u8 temp[64]; @@ -216,6 +236,7 @@ void bpf_jit_compile(struct sk_filter *fp) case BPF_S_ANC_VLAN_TAG: case BPF_S_ANC_VLAN_TAG_PRESENT: case BPF_S_ANC_QUEUE: + case BPF_S_ANC_PKTTYPE: case BPF_S_LD_W_ABS: case BPF_S_LD_H_ABS: case BPF_S_LD_B_ABS: @@ -536,6 +557,23 @@ void bpf_jit_compile(struct sk_filter *fp) EMIT3(0x83, 0xe0, 0x01); /* and $0x1,%eax */ } break; + case BPF_S_ANC_PKTTYPE: + { + int off = pkt_type_offset(); + + if (off < 0) + goto out; + if (is_imm8(off)) { + /* movzbl off8(%rdi),%eax */ + EMIT4(0x0f, 0xb6, 0x47, off); + } else { + /* movbl off32(%rdi),%eax */ + EMIT3(0x0f, 0xb6, 0x87); + EMIT(off, 4); + } + EMIT3(0x83, 0xe0, PKT_TYPE_MAX); /* and $0x7,%eax */ + break; + } case BPF_S_LD_W_ABS: func = CHOOSE_LOAD_FUNC(K, sk_load_word); common_load: seen |= SEEN_DATAREF; -- cgit v0.10.2 From f256dc59d0729cf7d371b93062375d9bc79c1e44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 30 Jan 2013 09:26:42 +0000 Subject: ipv6 flowlabel: Ensure to take lock when modifying np->ip6_sk_fl_list. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index 29124b7..5d767f1 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -255,10 +255,19 @@ void fl6_free_socklist(struct sock *sk) struct ipv6_pinfo *np = inet6_sk(sk); struct ipv6_fl_socklist *sfl; - while ((sfl = np->ipv6_fl_list) != NULL) { - np->ipv6_fl_list = sfl->next; + if (!np->ipv6_fl_list) + return; + + write_lock_bh(&ipv6_sk_fl_lock); + sfl = np->ipv6_fl_list; + np->ipv6_fl_list = NULL; + write_unlock_bh(&ipv6_sk_fl_lock); + + while (sfl) { + struct ipv6_fl_socklist *next = sfl->next; fl_release(sfl->fl); kfree(sfl); + sfl = next; } } -- cgit v0.10.2 From d3aedd5ebd4b0b925b0bcda548066803e1318499 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 30 Jan 2013 09:27:47 +0000 Subject: ipv6 flowlabel: Convert hash list to RCU. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index dc30b60..1d45716 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -222,6 +222,7 @@ struct ip6_flowlabel { struct in6_addr dst; struct ipv6_txoptions *opt; unsigned long linger; + struct rcu_head rcu; u8 share; union { struct pid *pid; diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index 5d767f1..da15601 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -51,25 +51,33 @@ #define FL_HASH(l) (ntohl(l)&FL_HASH_MASK) static atomic_t fl_size = ATOMIC_INIT(0); -static struct ip6_flowlabel *fl_ht[FL_HASH_MASK+1]; +static struct ip6_flowlabel __rcu *fl_ht[FL_HASH_MASK+1]; static void ip6_fl_gc(unsigned long dummy); static DEFINE_TIMER(ip6_fl_gc_timer, ip6_fl_gc, 0, 0); /* FL hash table lock: it protects only of GC */ -static DEFINE_RWLOCK(ip6_fl_lock); +static DEFINE_SPINLOCK(ip6_fl_lock); /* Big socket sock */ static DEFINE_RWLOCK(ip6_sk_fl_lock); +#define for_each_fl_rcu(hash, fl) \ + for (fl = rcu_dereference(fl_ht[(hash)]); \ + fl != NULL; \ + fl = rcu_dereference(fl->next)) +#define for_each_fl_continue_rcu(fl) \ + for (fl = rcu_dereference(fl->next); \ + fl != NULL; \ + fl = rcu_dereference(fl->next)) static inline struct ip6_flowlabel *__fl_lookup(struct net *net, __be32 label) { struct ip6_flowlabel *fl; - for (fl=fl_ht[FL_HASH(label)]; fl; fl = fl->next) { + for_each_fl_rcu(FL_HASH(label), fl) { if (fl->label == label && net_eq(fl->fl_net, net)) return fl; } @@ -80,11 +88,11 @@ static struct ip6_flowlabel *fl_lookup(struct net *net, __be32 label) { struct ip6_flowlabel *fl; - read_lock_bh(&ip6_fl_lock); + rcu_read_lock_bh(); fl = __fl_lookup(net, label); - if (fl) - atomic_inc(&fl->users); - read_unlock_bh(&ip6_fl_lock); + if (fl && !atomic_inc_not_zero(&fl->users)) + fl = NULL; + rcu_read_unlock_bh(); return fl; } @@ -96,13 +104,13 @@ static void fl_free(struct ip6_flowlabel *fl) put_pid(fl->owner.pid); release_net(fl->fl_net); kfree(fl->opt); + kfree_rcu(fl, rcu); } - kfree(fl); } static void fl_release(struct ip6_flowlabel *fl) { - write_lock_bh(&ip6_fl_lock); + spin_lock_bh(&ip6_fl_lock); fl->lastuse = jiffies; if (atomic_dec_and_test(&fl->users)) { @@ -119,7 +127,7 @@ static void fl_release(struct ip6_flowlabel *fl) time_after(ip6_fl_gc_timer.expires, ttd)) mod_timer(&ip6_fl_gc_timer, ttd); } - write_unlock_bh(&ip6_fl_lock); + spin_unlock_bh(&ip6_fl_lock); } static void ip6_fl_gc(unsigned long dummy) @@ -128,12 +136,13 @@ static void ip6_fl_gc(unsigned long dummy) unsigned long now = jiffies; unsigned long sched = 0; - write_lock(&ip6_fl_lock); + spin_lock(&ip6_fl_lock); for (i=0; i<=FL_HASH_MASK; i++) { struct ip6_flowlabel *fl, **flp; flp = &fl_ht[i]; - while ((fl=*flp) != NULL) { + while ((fl = rcu_dereference_protected(*flp, + lockdep_is_held(&ip6_fl_lock))) != NULL) { if (atomic_read(&fl->users) == 0) { unsigned long ttd = fl->lastuse + fl->linger; if (time_after(ttd, fl->expires)) @@ -156,18 +165,19 @@ static void ip6_fl_gc(unsigned long dummy) if (sched) { mod_timer(&ip6_fl_gc_timer, sched); } - write_unlock(&ip6_fl_lock); + spin_unlock(&ip6_fl_lock); } static void __net_exit ip6_fl_purge(struct net *net) { int i; - write_lock(&ip6_fl_lock); + spin_lock(&ip6_fl_lock); for (i = 0; i <= FL_HASH_MASK; i++) { struct ip6_flowlabel *fl, **flp; flp = &fl_ht[i]; - while ((fl = *flp) != NULL) { + while ((fl = rcu_dereference_protected(*flp, + lockdep_is_held(&ip6_fl_lock))) != NULL) { if (net_eq(fl->fl_net, net) && atomic_read(&fl->users) == 0) { *flp = fl->next; @@ -178,7 +188,7 @@ static void __net_exit ip6_fl_purge(struct net *net) flp = &fl->next; } } - write_unlock(&ip6_fl_lock); + spin_unlock(&ip6_fl_lock); } static struct ip6_flowlabel *fl_intern(struct net *net, @@ -188,7 +198,7 @@ static struct ip6_flowlabel *fl_intern(struct net *net, fl->label = label & IPV6_FLOWLABEL_MASK; - write_lock_bh(&ip6_fl_lock); + spin_lock_bh(&ip6_fl_lock); if (label == 0) { for (;;) { fl->label = htonl(net_random())&IPV6_FLOWLABEL_MASK; @@ -210,16 +220,16 @@ static struct ip6_flowlabel *fl_intern(struct net *net, lfl = __fl_lookup(net, fl->label); if (lfl != NULL) { atomic_inc(&lfl->users); - write_unlock_bh(&ip6_fl_lock); + spin_unlock_bh(&ip6_fl_lock); return lfl; } } fl->lastuse = jiffies; fl->next = fl_ht[FL_HASH(fl->label)]; - fl_ht[FL_HASH(fl->label)] = fl; + rcu_assign_pointer(fl_ht[FL_HASH(fl->label)], fl); atomic_inc(&fl_size); - write_unlock_bh(&ip6_fl_lock); + spin_unlock_bh(&ip6_fl_lock); return NULL; } @@ -650,13 +660,13 @@ static struct ip6_flowlabel *ip6fl_get_first(struct seq_file *seq) struct net *net = seq_file_net(seq); for (state->bucket = 0; state->bucket <= FL_HASH_MASK; ++state->bucket) { - fl = fl_ht[state->bucket]; - - while (fl && !net_eq(fl->fl_net, net)) - fl = fl->next; - if (fl) - break; + for_each_fl_rcu(state->bucket, fl) { + if (net_eq(fl->fl_net, net)) + goto out; + } } + fl = NULL; +out: return fl; } @@ -665,18 +675,22 @@ static struct ip6_flowlabel *ip6fl_get_next(struct seq_file *seq, struct ip6_flo struct ip6fl_iter_state *state = ip6fl_seq_private(seq); struct net *net = seq_file_net(seq); - fl = fl->next; + for_each_fl_continue_rcu(fl) { + if (net_eq(fl->fl_net, net)) + goto out; + } + try_again: - while (fl && !net_eq(fl->fl_net, net)) - fl = fl->next; - - while (!fl) { - if (++state->bucket <= FL_HASH_MASK) { - fl = fl_ht[state->bucket]; - goto try_again; - } else - break; + if (++state->bucket <= FL_HASH_MASK) { + for_each_fl_rcu(state->bucket, fl) { + if (net_eq(fl->fl_net, net)) + goto out; + } + goto try_again; } + fl = NULL; + +out: return fl; } @@ -690,9 +704,9 @@ static struct ip6_flowlabel *ip6fl_get_idx(struct seq_file *seq, loff_t pos) } static void *ip6fl_seq_start(struct seq_file *seq, loff_t *pos) - __acquires(ip6_fl_lock) + __acquires(RCU) { - read_lock_bh(&ip6_fl_lock); + rcu_read_lock_bh(); return *pos ? ip6fl_get_idx(seq, *pos - 1) : SEQ_START_TOKEN; } @@ -709,9 +723,9 @@ static void *ip6fl_seq_next(struct seq_file *seq, void *v, loff_t *pos) } static void ip6fl_seq_stop(struct seq_file *seq, void *v) - __releases(ip6_fl_lock) + __releases(RCU) { - read_unlock_bh(&ip6_fl_lock); + rcu_read_unlock_bh(); } static int ip6fl_seq_show(struct seq_file *seq, void *v) -- cgit v0.10.2 From 18367681a10bd29c3f2305e6b7b984de5b33d548 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 30 Jan 2013 09:27:52 +0000 Subject: ipv6 flowlabel: Convert np->ipv6_fl_list to RCU. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index e971e37..850e95b 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -214,7 +214,7 @@ struct ipv6_pinfo { struct ipv6_mc_socklist __rcu *ipv6_mc_list; struct ipv6_ac_socklist *ipv6_ac_list; - struct ipv6_fl_socklist *ipv6_fl_list; + struct ipv6_fl_socklist __rcu *ipv6_fl_list; struct ipv6_txoptions *opt; struct sk_buff *pktoptions; diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 1d45716..851d541 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -239,6 +239,7 @@ struct ip6_flowlabel { struct ipv6_fl_socklist { struct ipv6_fl_socklist *next; struct ip6_flowlabel *fl; + struct rcu_head rcu; }; extern struct ip6_flowlabel *fl6_sock_lookup(struct sock *sk, __be32 label); diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index da15601..22494af 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -62,7 +62,7 @@ static DEFINE_SPINLOCK(ip6_fl_lock); /* Big socket sock */ -static DEFINE_RWLOCK(ip6_sk_fl_lock); +static DEFINE_SPINLOCK(ip6_sk_fl_lock); #define for_each_fl_rcu(hash, fl) \ for (fl = rcu_dereference(fl_ht[(hash)]); \ @@ -73,6 +73,11 @@ static DEFINE_RWLOCK(ip6_sk_fl_lock); fl != NULL; \ fl = rcu_dereference(fl->next)) +#define for_each_sk_fl_rcu(np, sfl) \ + for (sfl = rcu_dereference_bh(np->ipv6_fl_list); \ + sfl != NULL; \ + sfl = rcu_dereference_bh(sfl->next)) + static inline struct ip6_flowlabel *__fl_lookup(struct net *net, __be32 label) { struct ip6_flowlabel *fl; @@ -244,17 +249,17 @@ struct ip6_flowlabel * fl6_sock_lookup(struct sock *sk, __be32 label) label &= IPV6_FLOWLABEL_MASK; - read_lock_bh(&ip6_sk_fl_lock); - for (sfl=np->ipv6_fl_list; sfl; sfl = sfl->next) { + rcu_read_lock_bh(); + for_each_sk_fl_rcu(np, sfl) { struct ip6_flowlabel *fl = sfl->fl; if (fl->label == label) { fl->lastuse = jiffies; atomic_inc(&fl->users); - read_unlock_bh(&ip6_sk_fl_lock); + rcu_read_unlock_bh(); return fl; } } - read_unlock_bh(&ip6_sk_fl_lock); + rcu_read_unlock_bh(); return NULL; } @@ -265,20 +270,21 @@ void fl6_free_socklist(struct sock *sk) struct ipv6_pinfo *np = inet6_sk(sk); struct ipv6_fl_socklist *sfl; - if (!np->ipv6_fl_list) + if (!rcu_access_pointer(np->ipv6_fl_list)) return; - write_lock_bh(&ipv6_sk_fl_lock); - sfl = np->ipv6_fl_list; - np->ipv6_fl_list = NULL; - write_unlock_bh(&ipv6_sk_fl_lock); + spin_lock_bh(&ip6_sk_fl_lock); + while ((sfl = rcu_dereference_protected(np->ipv6_fl_list, + lockdep_is_held(&ip6_sk_fl_lock))) != NULL) { + np->ipv6_fl_list = sfl->next; + spin_unlock_bh(&ip6_sk_fl_lock); - while (sfl) { - struct ipv6_fl_socklist *next = sfl->next; fl_release(sfl->fl); - kfree(sfl); - sfl = next; + kfree_rcu(sfl, rcu); + + spin_lock_bh(&ip6_sk_fl_lock); } + spin_unlock_bh(&ip6_sk_fl_lock); } /* Service routines */ @@ -443,7 +449,7 @@ static int mem_check(struct sock *sk) if (room > FL_MAX_SIZE - FL_MAX_PER_SOCK) return 0; - for (sfl = np->ipv6_fl_list; sfl; sfl = sfl->next) + for_each_sk_fl_rcu(np, sfl) count++; if (room <= 0 || @@ -486,11 +492,11 @@ static bool ipv6_opt_cmp(struct ipv6_txoptions *o1, struct ipv6_txoptions *o2) static inline void fl_link(struct ipv6_pinfo *np, struct ipv6_fl_socklist *sfl, struct ip6_flowlabel *fl) { - write_lock_bh(&ip6_sk_fl_lock); + spin_lock_bh(&ip6_sk_fl_lock); sfl->fl = fl; sfl->next = np->ipv6_fl_list; - np->ipv6_fl_list = sfl; - write_unlock_bh(&ip6_sk_fl_lock); + rcu_assign_pointer(np->ipv6_fl_list, sfl); + spin_unlock_bh(&ip6_sk_fl_lock); } int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) @@ -512,31 +518,33 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) switch (freq.flr_action) { case IPV6_FL_A_PUT: - write_lock_bh(&ip6_sk_fl_lock); - for (sflp = &np->ipv6_fl_list; (sfl=*sflp)!=NULL; sflp = &sfl->next) { + spin_lock_bh(&ip6_sk_fl_lock); + for (sflp = &np->ipv6_fl_list; + (sfl = rcu_dereference(*sflp))!=NULL; + sflp = &sfl->next) { if (sfl->fl->label == freq.flr_label) { if (freq.flr_label == (np->flow_label&IPV6_FLOWLABEL_MASK)) np->flow_label &= ~IPV6_FLOWLABEL_MASK; - *sflp = sfl->next; - write_unlock_bh(&ip6_sk_fl_lock); + *sflp = rcu_dereference(sfl->next); + spin_unlock_bh(&ip6_sk_fl_lock); fl_release(sfl->fl); - kfree(sfl); + kfree_rcu(sfl, rcu); return 0; } } - write_unlock_bh(&ip6_sk_fl_lock); + spin_unlock_bh(&ip6_sk_fl_lock); return -ESRCH; case IPV6_FL_A_RENEW: - read_lock_bh(&ip6_sk_fl_lock); - for (sfl = np->ipv6_fl_list; sfl; sfl = sfl->next) { + rcu_read_lock_bh(); + for_each_sk_fl_rcu(np, sfl) { if (sfl->fl->label == freq.flr_label) { err = fl6_renew(sfl->fl, freq.flr_linger, freq.flr_expires); - read_unlock_bh(&ip6_sk_fl_lock); + rcu_read_unlock_bh(); return err; } } - read_unlock_bh(&ip6_sk_fl_lock); + rcu_read_unlock_bh(); if (freq.flr_share == IPV6_FL_S_NONE && ns_capable(net->user_ns, CAP_NET_ADMIN)) { @@ -560,11 +568,11 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) if (freq.flr_label) { err = -EEXIST; - read_lock_bh(&ip6_sk_fl_lock); - for (sfl = np->ipv6_fl_list; sfl; sfl = sfl->next) { + rcu_read_lock_bh(); + for_each_sk_fl_rcu(np, sfl) { if (sfl->fl->label == freq.flr_label) { if (freq.flr_flags&IPV6_FL_F_EXCL) { - read_unlock_bh(&ip6_sk_fl_lock); + rcu_read_unlock_bh(); goto done; } fl1 = sfl->fl; @@ -572,7 +580,7 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) break; } } - read_unlock_bh(&ip6_sk_fl_lock); + rcu_read_unlock_bh(); if (fl1 == NULL) fl1 = fl_lookup(net, freq.flr_label); -- cgit v0.10.2 From c33e7b05f1411b97cd0260ae682fc1cdb27bfaa4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 30 Jan 2013 09:27:58 +0000 Subject: ipv6 anycast: Convert ipv6_sk_ac_lock to spinlock. Since all users are write-lock, it does not make sense to use rwlock here. Use simple spinlock. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c index 757a810..921b8b3 100644 --- a/net/ipv6/anycast.c +++ b/net/ipv6/anycast.c @@ -47,7 +47,7 @@ static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr); /* Big ac list lock for all the sockets */ -static DEFINE_RWLOCK(ipv6_sk_ac_lock); +static DEFINE_SPINLOCK(ipv6_sk_ac_lock); /* @@ -128,10 +128,10 @@ int ipv6_sock_ac_join(struct sock *sk, int ifindex, const struct in6_addr *addr) err = ipv6_dev_ac_inc(dev, addr); if (!err) { - write_lock_bh(&ipv6_sk_ac_lock); + spin_lock_bh(&ipv6_sk_ac_lock); pac->acl_next = np->ipv6_ac_list; np->ipv6_ac_list = pac; - write_unlock_bh(&ipv6_sk_ac_lock); + spin_unlock_bh(&ipv6_sk_ac_lock); pac = NULL; } @@ -152,7 +152,7 @@ int ipv6_sock_ac_drop(struct sock *sk, int ifindex, const struct in6_addr *addr) struct ipv6_ac_socklist *pac, *prev_pac; struct net *net = sock_net(sk); - write_lock_bh(&ipv6_sk_ac_lock); + spin_lock_bh(&ipv6_sk_ac_lock); prev_pac = NULL; for (pac = np->ipv6_ac_list; pac; pac = pac->acl_next) { if ((ifindex == 0 || pac->acl_ifindex == ifindex) && @@ -161,7 +161,7 @@ int ipv6_sock_ac_drop(struct sock *sk, int ifindex, const struct in6_addr *addr) prev_pac = pac; } if (!pac) { - write_unlock_bh(&ipv6_sk_ac_lock); + spin_unlock_bh(&ipv6_sk_ac_lock); return -ENOENT; } if (prev_pac) @@ -169,7 +169,7 @@ int ipv6_sock_ac_drop(struct sock *sk, int ifindex, const struct in6_addr *addr) else np->ipv6_ac_list = pac->acl_next; - write_unlock_bh(&ipv6_sk_ac_lock); + spin_unlock_bh(&ipv6_sk_ac_lock); rcu_read_lock(); dev = dev_get_by_index_rcu(net, pac->acl_ifindex); @@ -192,10 +192,10 @@ void ipv6_sock_ac_close(struct sock *sk) if (!np->ipv6_ac_list) return; - write_lock_bh(&ipv6_sk_ac_lock); + spin_lock_bh(&ipv6_sk_ac_lock); pac = np->ipv6_ac_list; np->ipv6_ac_list = NULL; - write_unlock_bh(&ipv6_sk_ac_lock); + spin_unlock_bh(&ipv6_sk_ac_lock); prev_index = 0; rcu_read_lock(); -- cgit v0.10.2 From 1b13c97fae9c61dc20db8e0d0a72a29df29ac377 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Tue, 29 Jan 2013 23:43:07 +0000 Subject: net/vxlan: Add ethtool drvinfo Implement ethtool get_drvinfo. Signed-off-by: Yan Burman Signed-off-by: David S. Miller diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 656230e..72485b9 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -1271,6 +1272,18 @@ static int vxlan_validate(struct nlattr *tb[], struct nlattr *data[]) return 0; } +static void vxlan_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + strlcpy(drvinfo->version, VXLAN_VERSION, sizeof(drvinfo->version)); + strlcpy(drvinfo->driver, "vxlan", sizeof(drvinfo->driver)); +} + +static const struct ethtool_ops vxlan_ethtool_ops = { + .get_drvinfo = vxlan_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + static int vxlan_newlink(struct net *net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { @@ -1348,6 +1361,8 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, vxlan->port_max = ntohs(p->high); } + SET_ETHTOOL_OPS(dev, &vxlan_ethtool_ops); + err = register_netdevice(dev); if (!err) hlist_add_head_rcu(&vxlan->hlist, vni_head(net, vxlan->vni)); -- cgit v0.10.2 From cd8f7cb4e6dfa4ea08fc250a814240b883ef7911 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 22 Jan 2013 12:34:29 +0100 Subject: cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 36e076e..48add7e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1597,6 +1597,32 @@ struct cfg80211_wowlan { }; /** + * struct cfg80211_wowlan_wakeup - wakeup report + * @disconnect: woke up by getting disconnected + * @magic_pkt: woke up by receiving magic packet + * @gtk_rekey_failure: woke up by GTK rekey failure + * @eap_identity_req: woke up by EAP identity request packet + * @four_way_handshake: woke up by 4-way handshake + * @rfkill_release: woke up by rfkill being released + * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern + * @packet_present_len: copied wakeup packet data + * @packet_len: original wakeup packet length + * @packet: The packet causing the wakeup, if any. + * @packet_80211: For pattern match, magic packet and other data + * frame triggers an 802.3 frame should be reported, for + * disconnect due to deauth 802.11 frame. This indicates which + * it is. + */ +struct cfg80211_wowlan_wakeup { + bool disconnect, magic_pkt, gtk_rekey_failure, + eap_identity_req, four_way_handshake, + rfkill_release, packet_80211; + s32 pattern_idx; + u32 packet_present_len, packet_len; + const void *packet; +}; + +/** * struct cfg80211_gtk_rekey_data - rekey data * @kek: key encryption key * @kck: key confirmation key @@ -3852,6 +3878,21 @@ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, u8 *buf, unsigned int bufsize); +/** + * cfg80211_report_wowlan_wakeup - report wakeup from WoWLAN + * @wdev: the wireless device reporting the wakeup + * @wakeup: the wakeup report + * @gfp: allocation flags + * + * This function reports that the given device woke up. If it + * caused the wakeup, report the reason(s), otherwise you may + * pass %NULL as the @wakeup parameter to advertise that something + * else caused the wakeup. + */ +void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 21831ee..7a27e00 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4206,4 +4206,16 @@ void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); */ int ieee80211_ave_rssi(struct ieee80211_vif *vif); +/** + * ieee80211_report_wowlan_wakeup - report WoWLAN wakeup + * @vif: virtual interface + * @wakeup: wakeup reason(s) + * @gfp: allocation flags + * + * See cfg80211_report_wowlan_wakeup(). + */ +void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp); + #endif /* MAC80211_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5b7dbc1..225a65e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -513,6 +513,12 @@ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. * * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver * the necessary information for supporting GTK rekey offload. This @@ -2947,6 +2953,10 @@ struct nl80211_wowlan_pattern_support { * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be * used when setting, used only to indicate that GTK rekeying is supported * by the device (flag) @@ -2957,8 +2967,25 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). */ enum nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, @@ -2971,6 +2998,10 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, /* keep last */ NUM_NL80211_WOWLAN_TRIG, diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index e45b836..53801d2 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -228,3 +228,13 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) * ieee80211_reconfig(), which is also needed for hardware * hang/firmware failure/etc. recovery. */ + +void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + cfg80211_report_wowlan_wakeup(&sdata->wdev, wakeup, gfp); +} +EXPORT_SYMBOL(ieee80211_report_wowlan_wakeup); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b5978ab..d359734 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -9323,6 +9323,103 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_report_obss_beacon); +#ifdef CONFIG_PM +void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); + struct sk_buff *msg; + void *hdr; + int err, size = 200; + + trace_cfg80211_report_wowlan_wakeup(wdev->wiphy, wdev, wakeup); + + if (wakeup) + size += wakeup->packet_present_len; + + msg = nlmsg_new(size, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_SET_WOWLAN); + if (!hdr) + goto free_msg; + + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev))) + goto free_msg; + + if (wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX, + wdev->netdev->ifindex)) + goto free_msg; + + if (wakeup) { + struct nlattr *reasons; + + reasons = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS); + + if (wakeup->disconnect && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT)) + goto free_msg; + if (wakeup->magic_pkt && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT)) + goto free_msg; + if (wakeup->gtk_rekey_failure && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE)) + goto free_msg; + if (wakeup->eap_identity_req && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST)) + goto free_msg; + if (wakeup->four_way_handshake && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE)) + goto free_msg; + if (wakeup->rfkill_release && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE)) + goto free_msg; + + if (wakeup->pattern_idx >= 0 && + nla_put_u32(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN, + wakeup->pattern_idx)) + goto free_msg; + + if (wakeup->packet) { + u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211; + u32 len_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN; + + if (!wakeup->packet_80211) { + pkt_attr = + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023; + len_attr = + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN; + } + + if (wakeup->packet_len && + nla_put_u32(msg, len_attr, wakeup->packet_len)) + goto free_msg; + + if (nla_put(msg, pkt_attr, wakeup->packet_present_len, + wakeup->packet)) + goto free_msg; + } + + nla_nest_end(msg, reasons); + } + + err = genlmsg_end(msg, hdr); + if (err < 0) + goto free_msg; + + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0, + nl80211_mlme_mcgrp.id, gfp); + return; + + free_msg: + nlmsg_free(msg); +} +EXPORT_SYMBOL(cfg80211_report_wowlan_wakeup); +#endif + void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper, u16 reason_code, gfp_t gfp) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 8bc5531..c9cafb0 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2333,6 +2333,41 @@ TRACE_EVENT(cfg80211_return_u32, TP_printk("ret: %u", __entry->ret) ); +TRACE_EVENT(cfg80211_report_wowlan_wakeup, + TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup), + TP_ARGS(wiphy, wdev, wakeup), + TP_STRUCT__entry( + WIPHY_ENTRY + WDEV_ENTRY + __field(bool, disconnect) + __field(bool, magic_pkt) + __field(bool, gtk_rekey_failure) + __field(bool, eap_identity_req) + __field(bool, four_way_handshake) + __field(bool, rfkill_release) + __field(s32, pattern_idx) + __field(u32, packet_len) + __dynamic_array(u8, packet, wakeup->packet_present_len) + ), + TP_fast_assign( + WIPHY_ASSIGN; + WDEV_ASSIGN; + __entry->disconnect = wakeup->disconnect; + __entry->magic_pkt = wakeup->magic_pkt; + __entry->gtk_rekey_failure = wakeup->gtk_rekey_failure; + __entry->eap_identity_req = wakeup->eap_identity_req; + __entry->four_way_handshake = wakeup->four_way_handshake; + __entry->rfkill_release = wakeup->rfkill_release; + __entry->pattern_idx = wakeup->pattern_idx; + __entry->packet_len = wakeup->packet_len; + if (wakeup->packet && wakeup->packet_present_len) + memcpy(__get_dynamic_array(packet), wakeup->packet, + wakeup->packet_present_len); + ), + TP_printk(WIPHY_PR_FMT ", " WDEV_PR_FMT, WIPHY_PR_ARG, WDEV_PR_ARG) +); + #endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */ #undef TRACE_INCLUDE_PATH -- cgit v0.10.2 From fdcb786930777231c81f487ab2526d33971a3438 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Jan 2013 00:44:12 +0100 Subject: mac80211: remove assoc data "sent_assoc" The field is never used, so remove it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5fba867..2f50be7 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -400,7 +400,6 @@ struct ieee80211_mgd_assoc_data { u8 supp_rates_len; bool wmm, uapsd; bool have_beacon; - bool sent_assoc; bool synced; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5913fb9..d79b9cd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2555,7 +2555,6 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; - ifmgd->assoc_data->sent_assoc = false; /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -3967,13 +3966,11 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, ifmgd->dtim_period = tim->dtim_period; } assoc_data->have_beacon = true; - assoc_data->sent_assoc = false; assoc_data->timeout = jiffies; } rcu_read_unlock(); } else { assoc_data->have_beacon = true; - assoc_data->sent_assoc = false; assoc_data->timeout = jiffies; } run_again(ifmgd, assoc_data->timeout); -- cgit v0.10.2 From c65dd1477b6fe5971489dd8b6e28a07ec277fdd6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 12 Dec 2012 10:12:24 +0200 Subject: mac80211: inform the driver about update of dtim_period Currently, when the driver requires the DTIM period, mac80211 will wait to hear a beacon before association. This behavior is suboptimal since some drivers may be able to deal with knowing the DTIM period after the association, if they get it at all. To address this, notify the drivers with bss_info_changed with the new BSS_CHANGED_DTIM_PERIOD flag when the DTIM becomes known. This might be when changing to associated, or later when the entire association was done with only probe response information. Rename the hardware flag for the current behaviour to IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC to more accurately reflect its behaviour. IEEE80211_HW_NEED_DTIM_PERIOD is no longer accurate as all drivers get the DTIM period now, just not before association. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index ef82751..f293b3f 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1853,7 +1853,7 @@ void *carl9170_alloc(size_t priv_size) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | - IEEE80211_HW_NEED_DTIM_PERIOD | + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SIGNAL_DBM; if (!modparam_noht) { diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index f1dc040..d3cc776 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5711,7 +5711,7 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | IEEE80211_HW_SPECTRUM_MGMT | + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fa43c0d..8e5c5c5 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -145,7 +145,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_QUEUE_CONTROL | diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7a27e00..398b6ca4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -208,6 +208,8 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS) * changed (currently only in P2P client mode, GO mode will be later) + * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when + * it becomes valid, managed mode only) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -230,6 +232,7 @@ enum ieee80211_bss_change { BSS_CHANGED_PS = 1<<17, BSS_CHANGED_TXPOWER = 1<<18, BSS_CHANGED_P2P_PS = 1<<19, + BSS_CHANGED_DTIM_PERIOD = 1<<20, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -271,9 +274,8 @@ enum ieee80211_rssi_event { * if the hardware cannot handle this it must set the * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag * @dtim_period: num of beacons before the next DTIM, for beaconing, - * valid in station mode only while @assoc is true and if also - * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf - * @ps_dtim_period) + * valid in station mode only if after the driver was notified + * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then. * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old * as it may have been received during scanning long ago) * @sync_device_ts: the device timestamp corresponding to the sync_tsf, @@ -1328,9 +1330,9 @@ struct ieee80211_tx_control { * When this flag is set, signaling beacon-loss will cause an immediate * change to disassociated state. * - * @IEEE80211_HW_NEED_DTIM_PERIOD: - * This device needs to know the DTIM period for the BSS before - * associating. + * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC: + * This device needs to get data from beacon before association (i.e. + * dtim_period). * * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports * per-station GTKs as used by IBSS RSN or during fast transition. If @@ -1375,7 +1377,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, IEEE80211_HW_SIGNAL_UNSPEC = 1<<5, IEEE80211_HW_SIGNAL_DBM = 1<<6, - IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7, + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC = 1<<7, IEEE80211_HW_SPECTRUM_MGMT = 1<<8, IEEE80211_HW_AMPDU_AGGREGATION = 1<<9, IEEE80211_HW_SUPPORTS_PS = 1<<10, diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 466f4b4..8e604099 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -121,8 +121,8 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += snprintf(buf + sf, mxln - sf, "SIGNAL_UNSPEC\n"); if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) sf += snprintf(buf + sf, mxln - sf, "SIGNAL_DBM\n"); - if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) - sf += snprintf(buf + sf, mxln - sf, "NEED_DTIM_PERIOD\n"); + if (local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC) + sf += snprintf(buf + sf, mxln - sf, "NEED_DTIM_BEFORE_ASSOC\n"); if (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT) sf += snprintf(buf + sf, mxln - sf, "SPECTRUM_MGMT\n"); if (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2f50be7..5ce0b6b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -399,7 +399,7 @@ struct ieee80211_mgd_assoc_data { u8 ssid_len; u8 supp_rates_len; bool wmm, uapsd; - bool have_beacon; + bool have_beacon, need_beacon; bool synced; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d79b9cd..a5dba67 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1445,7 +1445,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, ieee80211_led_assoc(local, 1); - if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { + if (sdata->u.mgd.assoc_data->have_beacon) { /* * If the AP is buggy we may get here with no DTIM period * known, so assume it's 1 which is the only safe assumption @@ -1453,6 +1453,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, * probably just won't work at all. */ bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; + bss_info_changed |= BSS_CHANGED_DTIM_PERIOD; } else { bss_conf->dtim_period = 0; } @@ -2548,13 +2549,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, chan = chanctx_conf->def.chan; rcu_read_unlock(); - if (ifmgd->assoc_data && !ifmgd->assoc_data->have_beacon && + if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; + ifmgd->assoc_data->need_beacon = false; /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -2711,6 +2713,19 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, elems.wmm_param_len)) changed |= BSS_CHANGED_QOS; + /* + * If we haven't had a beacon before, tell the driver about the + * DTIM period now. + */ + if (!bss_conf->dtim_period) { + /* a few bogus AP send dtim_period = 0 or no TIM IE */ + if (elems.tim) + bss_conf->dtim_period = elems.tim->dtim_period ?: 1; + else + bss_conf->dtim_period = 1; + changed |= BSS_CHANGED_DTIM_PERIOD; + } + if (elems.erp_info && elems.erp_info_len >= 1) { erp_valid = true; erp_value = elems.erp_info[0]; @@ -2989,7 +3004,8 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) if (ifmgd->assoc_data && time_after(jiffies, ifmgd->assoc_data->timeout)) { - if (!ifmgd->assoc_data->have_beacon || + if ((ifmgd->assoc_data->need_beacon && + !ifmgd->assoc_data->have_beacon) || ieee80211_do_assoc(sdata)) { u8 bssid[ETH_ALEN]; @@ -3776,6 +3792,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss *bss = (void *)req->bss->priv; struct ieee80211_mgd_assoc_data *assoc_data; + const struct cfg80211_bss_ies *beacon_ies; struct ieee80211_supported_band *sband; const u8 *ssidie, *ht_ie, *vht_ie; int i, err; @@ -3941,38 +3958,35 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, if (err) goto err_clear; - if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { - const struct cfg80211_bss_ies *beacon_ies; + rcu_read_lock(); + beacon_ies = rcu_dereference(req->bss->beacon_ies); - rcu_read_lock(); - beacon_ies = rcu_dereference(req->bss->beacon_ies); - if (!beacon_ies) { - /* - * Wait up to one beacon interval ... - * should this be more if we miss one? - */ - sdata_info(sdata, "waiting for beacon from %pM\n", - ifmgd->bssid); - assoc_data->timeout = - TU_TO_EXP_TIME(req->bss->beacon_interval); - } else { - const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, - beacon_ies->data, - beacon_ies->len); - if (tim_ie && tim_ie[1] >= - sizeof(struct ieee80211_tim_ie)) { - const struct ieee80211_tim_ie *tim; - tim = (void *)(tim_ie + 2); - ifmgd->dtim_period = tim->dtim_period; - } - assoc_data->have_beacon = true; - assoc_data->timeout = jiffies; + if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC && + !beacon_ies) { + /* + * Wait up to one beacon interval ... + * should this be more if we miss one? + */ + sdata_info(sdata, "waiting for beacon from %pM\n", + ifmgd->bssid); + assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + assoc_data->need_beacon = true; + } else if (beacon_ies) { + const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, + beacon_ies->data, + beacon_ies->len); + if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) { + const struct ieee80211_tim_ie *tim; + tim = (void *)(tim_ie + 2); + ifmgd->dtim_period = tim->dtim_period; } - rcu_read_unlock(); - } else { assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + } else { + assoc_data->timeout = jiffies; } + rcu_read_unlock(); + run_again(ifmgd, assoc_data->timeout); if (bss->corrupt_data) { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 7519018..1c74512 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1538,6 +1538,10 @@ int ieee80211_reconfig(struct ieee80211_local *local) changed |= BSS_CHANGED_ASSOC | BSS_CHANGED_ARP_FILTER | BSS_CHANGED_PS; + + if (sdata->u.mgd.dtim_period) + changed |= BSS_CHANGED_DTIM_PERIOD; + mutex_lock(&sdata->u.mgd.mtx); ieee80211_bss_info_change_notify(sdata, changed); mutex_unlock(&sdata->u.mgd.mtx); -- cgit v0.10.2 From ce9877c0cd68f52e1818f0e175fc7b2f85b0e655 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:33:30 +0100 Subject: mac80211: remove last_probe_resp from bss We track this, but never use it, so we can just remove it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5ce0b6b..12666c2 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -95,8 +95,6 @@ struct ieee80211_bss { bool wmm_used; bool uapsd_supported; - unsigned long last_probe_resp; - #ifdef CONFIG_MAC80211_MESH u8 *mesh_id; size_t mesh_id_len; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 607684c..f69a1b9 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -146,9 +146,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->valid_data |= IEEE80211_BSS_VALID_WMM; } - if (!beacon) - bss->last_probe_resp = jiffies; - return bss; } -- cgit v0.10.2 From 0fe20add2c4b768ba8432ed15635caa46417ede7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:37:04 +0100 Subject: mac80211: remove unused mesh data from bss These pointers/values are never used, remove them. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 12666c2..e4ee168 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -95,12 +95,6 @@ struct ieee80211_bss { bool wmm_used; bool uapsd_supported; -#ifdef CONFIG_MAC80211_MESH - u8 *mesh_id; - size_t mesh_id_len; - u8 *mesh_cfg; -#endif - #define IEEE80211_MAX_SUPP_RATES 32 u8 supp_rates[IEEE80211_MAX_SUPP_RATES]; size_t supp_rates_len; @@ -151,31 +145,6 @@ enum ieee80211_bss_valid_data_flags { IEEE80211_BSS_VALID_ERP = BIT(3) }; -static inline u8 *bss_mesh_cfg(struct ieee80211_bss *bss) -{ -#ifdef CONFIG_MAC80211_MESH - return bss->mesh_cfg; -#endif - return NULL; -} - -static inline u8 *bss_mesh_id(struct ieee80211_bss *bss) -{ -#ifdef CONFIG_MAC80211_MESH - return bss->mesh_id; -#endif - return NULL; -} - -static inline u8 bss_mesh_id_len(struct ieee80211_bss *bss) -{ -#ifdef CONFIG_MAC80211_MESH - return bss->mesh_id_len; -#endif - return 0; -} - - typedef unsigned __bitwise__ ieee80211_tx_result; #define TX_CONTINUE ((__force ieee80211_tx_result) 0u) #define TX_DROP ((__force ieee80211_tx_result) 1u) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f69a1b9..061595a 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -29,14 +29,6 @@ #define IEEE80211_CHANNEL_TIME (HZ / 33) #define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8) -static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss) -{ - struct ieee80211_bss *bss = (void *)cbss->priv; - - kfree(bss_mesh_id(bss)); - kfree(bss_mesh_cfg(bss)); -} - void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss) { @@ -85,7 +77,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local, if (!cbss) return NULL; - cbss->free_priv = ieee80211_rx_bss_free; bss = (void *)cbss->priv; bss->device_ts = rx_status->device_timestamp; -- cgit v0.10.2 From 3ff9a827c683353b9826ef57366b0f313acc21b0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:37:48 +0100 Subject: cfg80211: remove free_priv BSS API Now that mac80211 no longer uses this API, remove it completely. If anyone needs it again, we can revert this patch of course, but mac80211 was the only user right now. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 48add7e..63599ab 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1289,7 +1289,6 @@ struct cfg80211_bss_ies { * @beacon_ies: the information elements from the last Beacon frame * @proberesp_ies: the information elements from the last Probe Response frame * @signal: signal strength value (type depends on the wiphy's signal_type) - * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { @@ -1301,8 +1300,6 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; - void (*free_priv)(struct cfg80211_bss *bss); - s32 signal; u16 beacon_interval; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 01592d7..ca367c5 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -31,9 +31,6 @@ static void bss_release(struct kref *ref) if (WARN_ON(atomic_read(&bss->hold))) return; - if (bss->pub.free_priv) - bss->pub.free_priv(&bss->pub); - ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); if (ies) kfree_rcu(ies, rcu_head); -- cgit v0.10.2 From 1672c0e31917f49d31d30d79067103432bc20cc7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 15:02:27 +0100 Subject: mac80211: start auth/assoc timeout on frame status When sending authentication/association frames they might take a bit of time to go out because we may have to synchronise with the AP, in particular in the case where it's really a P2P GO. In this case the 200ms fixed timeout could potentially be too short if the beacon interval is relatively large. For drivers that report TX status we can do better. Instead of starting the timeout directly, start it only when the frame status arrives. Since then the frame was out on the air, we can wait shorter (the typical response time is supposed to be 30ms, wait 100ms.) Also, if the frame failed to be transmitted try again right away instead of waiting. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 398b6ca4..164fd4b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -408,6 +408,9 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted * after TX status because the destination was asleep, it must not * be modified again (no seqno assignment, crypto, etc.) + * @IEEE80211_TX_INTFL_MLME_CONN_TX: This frame was transmitted by the MLME + * code for connection establishment, this indicates that its status + * should kick the MLME state machine. * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211 * MLME command (internal to mac80211 to figure out whether to send TX * status to user space) @@ -459,7 +462,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17), IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), - /* hole at 20, use later */ + IEEE80211_TX_INTFL_MLME_CONN_TX = BIT(20), IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21), IEEE80211_TX_CTL_LDPC = BIT(22), IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24), diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index b4b866f..a54c824 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -302,7 +302,7 @@ static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta, "TX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=1)\n", sdata->vif.addr, addr, sdata->u.ibss.bssid); ieee80211_send_auth(sdata, 1, WLAN_AUTH_OPEN, 0, NULL, 0, - addr, sdata->u.ibss.bssid, NULL, 0, 0); + addr, sdata->u.ibss.bssid, NULL, 0, 0, 0); } return sta; } @@ -422,7 +422,7 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata, * has actually implemented this. */ ieee80211_send_auth(sdata, 2, WLAN_AUTH_OPEN, 0, NULL, 0, - mgmt->sa, sdata->u.ibss.bssid, NULL, 0, 0); + mgmt->sa, sdata->u.ibss.bssid, NULL, 0, 0, 0); } static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e4ee168..c9c66de 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -415,6 +415,10 @@ struct ieee80211_if_managed { bool beacon_crc_valid; u32 beacon_crc; + bool status_acked; + bool status_received; + __le16 status_fc; + enum { IEEE80211_MFP_DISABLED, IEEE80211_MFP_OPTIONAL, @@ -1284,6 +1288,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); +void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, + __le16 fc, bool acked); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); @@ -1544,7 +1550,8 @@ static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, u8 *extra, size_t extra_len, const u8 *bssid, - const u8 *da, const u8 *key, u8 key_len, u8 key_idx); + const u8 *da, const u8 *key, u8 key_len, u8 key_idx, + u32 tx_flags); void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, const u8 *bssid, u16 stype, u16 reason, bool send_frame, u8 *frame_buf); @@ -1561,7 +1568,7 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck, + u32 ratemask, bool directed, u32 tx_flags, struct ieee80211_channel *channel, bool scan); void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a5dba67..4ff52d0 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -30,11 +30,13 @@ #include "rate.h" #include "led.h" -#define IEEE80211_AUTH_TIMEOUT (HZ / 5) -#define IEEE80211_AUTH_MAX_TRIES 3 -#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) -#define IEEE80211_ASSOC_TIMEOUT (HZ / 5) -#define IEEE80211_ASSOC_MAX_TRIES 3 +#define IEEE80211_AUTH_TIMEOUT (HZ / 5) +#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) +#define IEEE80211_AUTH_MAX_TRIES 3 +#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) +#define IEEE80211_ASSOC_TIMEOUT (HZ / 5) +#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) +#define IEEE80211_ASSOC_MAX_TRIES 3 static int max_nullfunc_tries = 2; module_param(max_nullfunc_tries, int, 0644); @@ -644,6 +646,9 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) drv_mgd_prepare_tx(local, sdata); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_tx_skb(sdata, skb); } @@ -1707,7 +1712,7 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) ssid_len = ssid[1]; ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL, - 0, (u32) -1, true, false, + 0, (u32) -1, true, 0, ifmgd->associated->channel, false); rcu_read_unlock(); } @@ -1937,9 +1942,11 @@ static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { + struct ieee80211_local *local = sdata->local; struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; u8 *pos; struct ieee802_11_elems elems; + u32 tx_flags = 0; pos = mgmt->u.auth.variable; ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); @@ -1947,11 +1954,14 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, return; auth_data->expected_transaction = 4; drv_mgd_prepare_tx(sdata->local, sdata); + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, elems.challenge - 2, elems.challenge_len + 2, auth_data->bss->bssid, auth_data->bss->bssid, auth_data->key, auth_data->key_len, - auth_data->key_idx); + auth_data->key_idx, tx_flags); } static enum rx_mgmt_action __must_check @@ -2869,12 +2879,17 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; + u32 tx_flags = 0; lockdep_assert_held(&ifmgd->mtx); if (WARN_ON_ONCE(!auth_data)) return -EINVAL; + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { @@ -2911,7 +2926,8 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, auth_data->data, auth_data->data_len, auth_data->bss->bssid, - auth_data->bss->bssid, NULL, 0, 0); + auth_data->bss->bssid, NULL, 0, 0, + tx_flags); } else { const u8 *ssidie; @@ -2930,13 +2946,15 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) * will not answer to direct packet in unassociated state. */ ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], - NULL, 0, (u32) -1, true, false, + NULL, 0, (u32) -1, true, tx_flags, auth_data->bss->channel, false); rcu_read_unlock(); } - auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; - run_again(ifmgd, auth_data->timeout); + if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; + run_again(ifmgd, auth_data->timeout); + } return 0; } @@ -2967,12 +2985,26 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) IEEE80211_ASSOC_MAX_TRIES); ieee80211_send_assoc(sdata); - assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; - run_again(&sdata->u.mgd, assoc_data->timeout); + if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; + run_again(&sdata->u.mgd, assoc_data->timeout); + } return 0; } +void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, + __le16 fc, bool acked) +{ + struct ieee80211_local *local = sdata->local; + + sdata->u.mgd.status_fc = fc; + sdata->u.mgd.status_acked = acked; + sdata->u.mgd.status_received = true; + + ieee80211_queue_work(&local->hw, &sdata->work); +} + void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; @@ -2980,6 +3012,33 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) mutex_lock(&ifmgd->mtx); + if (ifmgd->status_received) { + __le16 fc = ifmgd->status_fc; + bool status_acked = ifmgd->status_acked; + + ifmgd->status_received = false; + if (ifmgd->auth_data && + (ieee80211_is_probe_req(fc) || ieee80211_is_auth(fc))) { + if (status_acked) { + ifmgd->auth_data->timeout = + jiffies + IEEE80211_AUTH_TIMEOUT_SHORT; + run_again(ifmgd, ifmgd->auth_data->timeout); + } else { + ifmgd->auth_data->timeout = jiffies - 1; + } + } else if (ifmgd->assoc_data && + (ieee80211_is_assoc_req(fc) || + ieee80211_is_reassoc_req(fc))) { + if (status_acked) { + ifmgd->assoc_data->timeout = + jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; + run_again(ifmgd, ifmgd->assoc_data->timeout); + } else { + ifmgd->assoc_data->timeout = jiffies - 1; + } + } + } + if (ifmgd->auth_data && time_after(jiffies, ifmgd->auth_data->timeout)) { if (ifmgd->auth_data->done) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 061595a..85d0e5e 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -389,7 +389,8 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck, + local->scan_req->no_cck ? + IEEE80211_TX_CTL_NO_CCK_RATE : 0, local->hw.conf.channel, true); /* diff --git a/net/mac80211/status.c b/net/mac80211/status.c index ab50285..d041de0 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -335,7 +335,8 @@ static void ieee80211_report_used_skb(struct ieee80211_local *local, if (dropped) acked = false; - if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) { + if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX | + IEEE80211_TX_INTFL_MLME_CONN_TX)) { struct ieee80211_sub_if_data *sdata = NULL; struct ieee80211_sub_if_data *iter_sdata; u64 cookie = (unsigned long)skb; @@ -357,10 +358,13 @@ static void ieee80211_report_used_skb(struct ieee80211_local *local, sdata = rcu_dereference(local->p2p_sdata); } - if (!sdata) + if (!sdata) { skb->dev = NULL; - else if (ieee80211_is_nullfunc(hdr->frame_control) || - ieee80211_is_qos_nullfunc(hdr->frame_control)) { + } else if (info->flags & IEEE80211_TX_INTFL_MLME_CONN_TX) { + ieee80211_mgd_conn_tx_status(sdata, hdr->frame_control, + acked); + } else if (ieee80211_is_nullfunc(hdr->frame_control) || + ieee80211_is_qos_nullfunc(hdr->frame_control)) { cfg80211_probe_status(sdata->dev, hdr->addr1, cookie, acked, GFP_ATOMIC); } else { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1c74512..139ad9b 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1030,7 +1030,8 @@ u32 ieee80211_mandatory_rates(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, u8 *extra, size_t extra_len, const u8 *da, - const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx) + const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx, + u32 tx_flags) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -1063,7 +1064,8 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, WARN_ON(err); } - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + tx_flags; ieee80211_tx_skb(sdata, skb); } @@ -1277,7 +1279,7 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck, + u32 ratemask, bool directed, u32 tx_flags, struct ieee80211_channel *channel, bool scan) { struct sk_buff *skb; @@ -1286,9 +1288,7 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, ssid, ssid_len, ie, ie_len, directed); if (skb) { - if (no_cck) - IEEE80211_SKB_CB(skb)->flags |= - IEEE80211_TX_CTL_NO_CCK_RATE; + IEEE80211_SKB_CB(skb)->flags |= tx_flags; if (scan) ieee80211_tx_skb_tid_band(sdata, skb, 7, channel->band); else -- cgit v0.10.2 From 3f892b61a8cf6a85bc389c8d13209d686a4f6403 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 23 Jan 2013 12:32:45 +0100 Subject: mac80211: improve latency and throughput while software scanning Patch vastly improve latency while scanning. Slight throughput improvements were observed as well. Is intended for improve performance of voice and video applications, when scan is periodically requested by user space (i.e. default NetworkManager behaviour). Patch remove latency requirement based on PM_QOS_NETWORK_LATENCY, this value is 2000 seconds by default (i.e. approximately 0.5 hour !?!). Also remove listen interval requirement, which based on beaconing and depending on BSS parameters. It can make we stay off-channel for a second or more. Instead try to offer the best latency that we could, i.e. be off-channel no longer than PASSIVE channel scan time: 125 ms. That mean we will scan two ACTIVE channels and go back to on-channel, and one PASSIVE channel, and go back to on-channel. Patch also decrease PASSIVE channel scan time to about 110 ms. As drawback patch increase overall scan time. On my tests, when scanning both 2GHz and 5GHz bands, scanning time increase from 5 seconds up to 10 seconds. Since that increase happen only when we are associated, I think it can be acceptable. If eventually better scan time is needed for situations when we lose signal and quickly need to decide to which AP roam, additional scan flag or parameter can be introduced. I tested patch by doing: while true; do iw dev wlan0 scan; sleep 3; done > /dev/null and ping -i0.2 -c 1000 HOST on remote and local machine, results are as below: * Ping from local periodically scanning machine to AP: Unpatched: rtt min/avg/max/mdev = 0.928/24.946/182.135/36.873 ms Patched: rtt min/avg/max/mdev = 0.928/19.678/150.845/33.130 ms * Ping from remote machine to periodically scanning machine: Unpatched: rtt min/avg/max/mdev = 1.637/120.683/709.139/164.337 ms Patched: rtt min/avg/max/mdev = 1.807/26.893/201.435/40.284 ms Throughput measured by scp show following results. * Upload to periodically scanning machine: Unpatched: 3.9MB/s 03:15 Patched: 4.3MB/s 02:58 * Download from periodically scanning machine: Unpatched: 5.5MB/s 02:17 Patched: 6.2MB/s 02:02 Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 85d0e5e..7f80f0a 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -27,7 +27,7 @@ #define IEEE80211_PROBE_DELAY (HZ / 33) #define IEEE80211_CHANNEL_TIME (HZ / 33) -#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8) +#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 9) void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss) @@ -535,8 +535,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, bool associated = false; bool tx_empty = true; bool bad_latency; - bool listen_int_exceeded; - unsigned long min_beacon_int = 0; struct ieee80211_sub_if_data *sdata; struct ieee80211_channel *next_chan; enum mac80211_scan_state next_scan_state; @@ -555,11 +553,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, if (sdata->u.mgd.associated) { associated = true; - if (sdata->vif.bss_conf.beacon_int < - min_beacon_int || min_beacon_int == 0) - min_beacon_int = - sdata->vif.bss_conf.beacon_int; - if (!qdisc_all_tx_empty(sdata->dev)) { tx_empty = false; break; @@ -576,34 +569,19 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, * see if we can scan another channel without interfering * with the current traffic situation. * - * Since we don't know if the AP has pending frames for us - * we can only check for our tx queues and use the current - * pm_qos requirements for rx. Hence, if no tx traffic occurs - * at all we will scan as many channels in a row as the pm_qos - * latency allows us to. Additionally we also check for the - * currently negotiated listen interval to prevent losing - * frames unnecessarily. - * - * Otherwise switch back to the operating channel. + * Keep good latency, do not stay off-channel more than 125 ms. */ bad_latency = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY))); - - listen_int_exceeded = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(min_beacon_int * 1024) * - local->hw.conf.listen_interval); + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + HZ / 8); if (associated && !tx_empty) { if (local->scan_req->flags & NL80211_SCAN_FLAG_LOW_PRIORITY) next_scan_state = SCAN_ABORT; else next_scan_state = SCAN_SUSPEND; - } else if (associated && (bad_latency || listen_int_exceeded)) { + } else if (associated && bad_latency) { next_scan_state = SCAN_SUSPEND; } else { next_scan_state = SCAN_SET_CHANNEL; -- cgit v0.10.2 From 015465f85193fdc3a0debb1c9176433ba19140b2 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:02 +0000 Subject: net/mlx4_core: Directly expose fields of HW flow steering rule control segment Some of the fields for struct mlx4_net_trans_rule_hw_ctrl were packed into u32 and accessed through bit field operations. Expose and access them directly as u8. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 1ee4db3..d7c0704 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -664,7 +664,7 @@ static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl, dw |= ctrl->priority << 16; hw->ctrl = cpu_to_be32(dw); - hw->vf_vep_port = cpu_to_be32(ctrl->port); + hw->port = ctrl->port; hw->qpn = cpu_to_be32(ctrl->qpn); } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 116c5c2..3263848 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -696,9 +696,12 @@ struct mlx4_steer { struct mlx4_net_trans_rule_hw_ctrl { __be32 ctrl; - __be32 vf_vep_port; + u8 rsvd1; + u8 funcid; + u8 vep; + u8 port; __be32 qpn; - __be32 reserved; + __be32 rsvd2; }; struct mlx4_net_trans_rule_hw_ib { diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 561ed2a..5997adc 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3018,7 +3018,7 @@ static int add_eth_header(struct mlx4_dev *dev, int slave, __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16); ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; - port = be32_to_cpu(ctrl->vf_vep_port) & 0xff; + port = ctrl->port; eth_header = (struct mlx4_net_trans_rule_hw_eth *)(ctrl + 1); /* Clear a space in the inbox for eth header */ -- cgit v0.10.2 From 248c62aa12a318fe53bf4f530b69b150c34416e7 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:03 +0000 Subject: net/mlx4_core: Set correctly allow_loopback flag The allow_loopback flag was wrongly set using arithmetic bit operation, change the code to use logical bit operation. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index d7c0704..5268552 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -1157,7 +1157,7 @@ int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], .priority = MLX4_DOMAIN_NIC, }; - rule.allow_loopback = ~block_mcast_loopback; + rule.allow_loopback = !block_mcast_loopback; rule.port = port; rule.qpn = qp->qpn; INIT_LIST_HEAD(&rule.list); -- cgit v0.10.2 From f90a36734a6a0d843baa37b7caa1ef020f799d47 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:04 +0000 Subject: net/mlx4_en: Fix ip/udp steering rules multicast mac when attached via ethtool Destination mac is a mandatory specification for ip/udp steering rules. When attaching multicast steering rules via ethtool the unicast mac of the interface was added to the rule specification instead of the multicast mac. The following commit sets the corresponding multicast mac for the rule multicast ip. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 03447da..86afb5b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -35,6 +35,8 @@ #include #include #include +#include +#include #include "mlx4_en.h" #include "en_port.h" @@ -672,19 +674,71 @@ static int mlx4_en_validate_flow(struct net_device *dev, return 0; } +static int mlx4_en_ethtool_add_mac_rule(struct ethtool_rxnfc *cmd, + struct list_head *rule_list_h, + struct mlx4_spec_list *spec_l2, + unsigned char *mac) +{ + int err = 0; + __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16); + + spec_l2->id = MLX4_NET_TRANS_RULE_ID_ETH; + memcpy(spec_l2->eth.dst_mac_msk, &mac_msk, ETH_ALEN); + memcpy(spec_l2->eth.dst_mac, mac, ETH_ALEN); + + if ((cmd->fs.flow_type & FLOW_EXT) && cmd->fs.m_ext.vlan_tci) { + spec_l2->eth.vlan_id = cmd->fs.h_ext.vlan_tci; + spec_l2->eth.vlan_id_msk = cpu_to_be16(0xfff); + } + + list_add_tail(&spec_l2->list, rule_list_h); + + return err; +} + +static int mlx4_en_ethtool_add_mac_rule_by_ipv4(struct mlx4_en_priv *priv, + struct ethtool_rxnfc *cmd, + struct list_head *rule_list_h, + struct mlx4_spec_list *spec_l2, + __be32 ipv4_dst) +{ + __be64 be_mac = 0; + unsigned char mac[ETH_ALEN]; + + if (!ipv4_is_multicast(ipv4_dst)) { + if (cmd->fs.flow_type & FLOW_MAC_EXT) { + memcpy(&mac, cmd->fs.h_ext.h_dest, ETH_ALEN); + } else { + be_mac = cpu_to_be64((priv->mac & MLX4_MAC_MASK) << 16); + memcpy(&mac, &be_mac, ETH_ALEN); + } + } else { + ip_eth_mc_map(ipv4_dst, mac); + } + + return mlx4_en_ethtool_add_mac_rule(cmd, rule_list_h, spec_l2, &mac[0]); +} + static int add_ip_rule(struct mlx4_en_priv *priv, - struct ethtool_rxnfc *cmd, - struct list_head *list_h) + struct ethtool_rxnfc *cmd, + struct list_head *list_h) { - struct mlx4_spec_list *spec_l3; + struct mlx4_spec_list *spec_l2 = NULL; + struct mlx4_spec_list *spec_l3 = NULL; struct ethtool_usrip4_spec *l3_mask = &cmd->fs.m_u.usr_ip4_spec; - spec_l3 = kzalloc(sizeof *spec_l3, GFP_KERNEL); - if (!spec_l3) { + spec_l3 = kzalloc(sizeof(*spec_l3), GFP_KERNEL); + spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL); + if (!spec_l2 || !spec_l3) { en_err(priv, "Fail to alloc ethtool rule.\n"); + kfree(spec_l2); + kfree(spec_l3); return -ENOMEM; } + mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, spec_l2, + cmd->fs.h_u. + usr_ip4_spec.ip4dst); spec_l3->id = MLX4_NET_TRANS_RULE_ID_IPV4; spec_l3->ipv4.src_ip = cmd->fs.h_u.usr_ip4_spec.ip4src; if (l3_mask->ip4src) @@ -701,14 +755,17 @@ static int add_tcp_udp_rule(struct mlx4_en_priv *priv, struct ethtool_rxnfc *cmd, struct list_head *list_h, int proto) { - struct mlx4_spec_list *spec_l3; - struct mlx4_spec_list *spec_l4; + struct mlx4_spec_list *spec_l2 = NULL; + struct mlx4_spec_list *spec_l3 = NULL; + struct mlx4_spec_list *spec_l4 = NULL; struct ethtool_tcpip4_spec *l4_mask = &cmd->fs.m_u.tcp_ip4_spec; - spec_l3 = kzalloc(sizeof *spec_l3, GFP_KERNEL); - spec_l4 = kzalloc(sizeof *spec_l4, GFP_KERNEL); - if (!spec_l4 || !spec_l3) { + spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL); + spec_l3 = kzalloc(sizeof(*spec_l3), GFP_KERNEL); + spec_l4 = kzalloc(sizeof(*spec_l4), GFP_KERNEL); + if (!spec_l2 || !spec_l3 || !spec_l4) { en_err(priv, "Fail to alloc ethtool rule.\n"); + kfree(spec_l2); kfree(spec_l3); kfree(spec_l4); return -ENOMEM; @@ -717,12 +774,20 @@ static int add_tcp_udp_rule(struct mlx4_en_priv *priv, spec_l3->id = MLX4_NET_TRANS_RULE_ID_IPV4; if (proto == TCP_V4_FLOW) { + mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, + spec_l2, + cmd->fs.h_u. + tcp_ip4_spec.ip4dst); spec_l4->id = MLX4_NET_TRANS_RULE_ID_TCP; spec_l3->ipv4.src_ip = cmd->fs.h_u.tcp_ip4_spec.ip4src; spec_l3->ipv4.dst_ip = cmd->fs.h_u.tcp_ip4_spec.ip4dst; spec_l4->tcp_udp.src_port = cmd->fs.h_u.tcp_ip4_spec.psrc; spec_l4->tcp_udp.dst_port = cmd->fs.h_u.tcp_ip4_spec.pdst; } else { + mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, + spec_l2, + cmd->fs.h_u. + udp_ip4_spec.ip4dst); spec_l4->id = MLX4_NET_TRANS_RULE_ID_UDP; spec_l3->ipv4.src_ip = cmd->fs.h_u.udp_ip4_spec.ip4src; spec_l3->ipv4.dst_ip = cmd->fs.h_u.udp_ip4_spec.ip4dst; @@ -751,43 +816,23 @@ static int mlx4_en_ethtool_to_net_trans_rule(struct net_device *dev, struct list_head *rule_list_h) { int err; - __be64 be_mac; struct ethhdr *eth_spec; - struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_spec_list *spec_l2; - __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16); + struct mlx4_en_priv *priv = netdev_priv(dev); err = mlx4_en_validate_flow(dev, cmd); if (err) return err; - spec_l2 = kzalloc(sizeof *spec_l2, GFP_KERNEL); - if (!spec_l2) - return -ENOMEM; - - if (cmd->fs.flow_type & FLOW_MAC_EXT) { - memcpy(&be_mac, cmd->fs.h_ext.h_dest, ETH_ALEN); - } else { - u64 mac = priv->mac & MLX4_MAC_MASK; - be_mac = cpu_to_be64(mac << 16); - } - - spec_l2->id = MLX4_NET_TRANS_RULE_ID_ETH; - memcpy(spec_l2->eth.dst_mac_msk, &mac_msk, ETH_ALEN); - if ((cmd->fs.flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) != ETHER_FLOW) - memcpy(spec_l2->eth.dst_mac, &be_mac, ETH_ALEN); - - if ((cmd->fs.flow_type & FLOW_EXT) && cmd->fs.m_ext.vlan_tci) { - spec_l2->eth.vlan_id = cmd->fs.h_ext.vlan_tci; - spec_l2->eth.vlan_id_msk = cpu_to_be16(0xfff); - } - - list_add_tail(&spec_l2->list, rule_list_h); - switch (cmd->fs.flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) { case ETHER_FLOW: + spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL); + if (!spec_l2) + return -ENOMEM; + eth_spec = &cmd->fs.h_u.ether_spec; - memcpy(&spec_l2->eth.dst_mac, eth_spec->h_dest, ETH_ALEN); + mlx4_en_ethtool_add_mac_rule(cmd, rule_list_h, spec_l2, + ð_spec->h_dest[0]); spec_l2->eth.ether_type = eth_spec->h_proto; if (eth_spec->h_proto) spec_l2->eth.ether_type_enable = 1; -- cgit v0.10.2 From 69d7126b7fef09beaa4b7c103ec2a5bd8c8b2666 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:05 +0000 Subject: net/mlx4_en: Validate VLAN IDs provided in ethtool flow steering rules When attaching flow steering rules via Ethtool accept only valid vlans IDs e.g in the range: [0,4095]. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 86afb5b..f33049f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -669,6 +669,10 @@ static int mlx4_en_validate_flow(struct net_device *dev, !(cmd->fs.m_ext.vlan_tci == 0 || cmd->fs.m_ext.vlan_tci == cpu_to_be16(0xfff))) return -EINVAL; + if (cmd->fs.m_ext.vlan_tci) { + if (be16_to_cpu(cmd->fs.h_ext.vlan_tci) >= VLAN_N_VID) + return -EINVAL; + } } return 0; -- cgit v0.10.2 From 8258bd2713c3e42bc0e5664cbede0e07587c125f Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:06 +0000 Subject: net/mlx4_en: Fix vlan mask for ethtool steering rules The vlan mask field should be validated and assigned according to the field size which is 12 bits. Also replace the numeric 0xfff mask with existing kernel macro. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index f33049f..f36c219 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -666,12 +666,16 @@ static int mlx4_en_validate_flow(struct net_device *dev, if ((cmd->fs.flow_type & FLOW_EXT)) { if (cmd->fs.m_ext.vlan_etype || - !(cmd->fs.m_ext.vlan_tci == 0 || - cmd->fs.m_ext.vlan_tci == cpu_to_be16(0xfff))) + !((cmd->fs.m_ext.vlan_tci & cpu_to_be16(VLAN_VID_MASK)) == + 0 || + (cmd->fs.m_ext.vlan_tci & cpu_to_be16(VLAN_VID_MASK)) == + cpu_to_be16(VLAN_VID_MASK))) return -EINVAL; + if (cmd->fs.m_ext.vlan_tci) { if (be16_to_cpu(cmd->fs.h_ext.vlan_tci) >= VLAN_N_VID) return -EINVAL; + } } @@ -690,9 +694,10 @@ static int mlx4_en_ethtool_add_mac_rule(struct ethtool_rxnfc *cmd, memcpy(spec_l2->eth.dst_mac_msk, &mac_msk, ETH_ALEN); memcpy(spec_l2->eth.dst_mac, mac, ETH_ALEN); - if ((cmd->fs.flow_type & FLOW_EXT) && cmd->fs.m_ext.vlan_tci) { + if ((cmd->fs.flow_type & FLOW_EXT) && + (cmd->fs.m_ext.vlan_tci & cpu_to_be16(VLAN_VID_MASK))) { spec_l2->eth.vlan_id = cmd->fs.h_ext.vlan_tci; - spec_l2->eth.vlan_id_msk = cpu_to_be16(0xfff); + spec_l2->eth.vlan_id_msk = cpu_to_be16(VLAN_VID_MASK); } list_add_tail(&spec_l2->list, rule_list_h); -- cgit v0.10.2 From 280fce1e3ef85ff7f90a9d7e8c8a0d71bbf5a9a4 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:07 +0000 Subject: net/mlx4_en: Block insertion of ethtool steering rules while the interface is down Attaching steering rules while the interface is down is an invalid operation, block it. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index f36c219..6f8044d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -1006,7 +1006,8 @@ static int mlx4_en_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, if ((cmd->cmd == ETHTOOL_GRXCLSRLCNT || cmd->cmd == ETHTOOL_GRXCLSRULE || cmd->cmd == ETHTOOL_GRXCLSRLALL) && - mdev->dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) + (mdev->dev->caps.steering_mode != + MLX4_STEERING_MODE_DEVICE_MANAGED || !priv->port_up)) return -EINVAL; switch (cmd->cmd) { @@ -1042,7 +1043,8 @@ static int mlx4_en_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; - if (mdev->dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) + if (mdev->dev->caps.steering_mode != + MLX4_STEERING_MODE_DEVICE_MANAGED || !priv->port_up) return -EINVAL; switch (cmd->cmd) { -- cgit v0.10.2 From 0d256c0e93916f416f46d2ec235ea05fca202ede Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:08 +0000 Subject: net/mlx4_en: Fix ethtool rules leftovers after module unloaded As part of the driver unload flow, all steering rules must be deleted, make sure to remove the rules that were set through ethtool. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 6f8044d..738e95d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -915,6 +915,7 @@ static int mlx4_en_flow_replace(struct net_device *dev, loc_rule->id = 0; memset(&loc_rule->flow_spec, 0, sizeof(struct ethtool_rx_flow_spec)); + list_del(&loc_rule->list); } err = mlx4_flow_attach(priv->mdev->dev, &rule, ®_id); if (err) { @@ -925,6 +926,7 @@ static int mlx4_en_flow_replace(struct net_device *dev, loc_rule->id = reg_id; memcpy(&loc_rule->flow_spec, &cmd->fs, sizeof(struct ethtool_rx_flow_spec)); + list_add_tail(&loc_rule->list, &priv->ethtool_list); out_free_list: list_for_each_entry_safe(spec, tmp_spec, &rule.list, list) { @@ -958,6 +960,7 @@ static int mlx4_en_flow_detach(struct net_device *dev, } rule->id = 0; memset(&rule->flow_spec, 0, sizeof(struct ethtool_rx_flow_spec)); + list_del(&rule->list); out: return err; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 9c42812..333a7a0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1039,6 +1039,9 @@ int mlx4_en_start_port(struct net_device *dev) INIT_LIST_HEAD(&priv->mc_list); INIT_LIST_HEAD(&priv->curr_list); + INIT_LIST_HEAD(&priv->ethtool_list); + memset(&priv->ethtool_rules[0], 0, + sizeof(struct ethtool_flow_id) * MAX_NUM_OF_FS_RULES); /* Calculate Rx buf size */ dev->mtu = min(dev->mtu, priv->max_mtu); @@ -1202,6 +1205,7 @@ void mlx4_en_stop_port(struct net_device *dev) struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_en_mc_list *mclist, *tmp; + struct ethtool_flow_id *flow, *tmp_flow; int i; u8 mc_list[16] = {0}; @@ -1283,6 +1287,17 @@ void mlx4_en_stop_port(struct net_device *dev) mlx4_put_eth_qp(mdev->dev, priv->port, priv->mac, priv->base_qpn); mdev->mac_removed[priv->port] = 1; + /* Remove flow steering rules for the port*/ + if (mdev->dev->caps.steering_mode == + MLX4_STEERING_MODE_DEVICE_MANAGED) { + ASSERT_RTNL(); + list_for_each_entry_safe(flow, tmp_flow, + &priv->ethtool_list, list) { + mlx4_flow_detach(mdev->dev, flow->id); + list_del(&flow->list); + } + } + /* Free RX Rings */ for (i = 0; i < priv->rx_ring_num; i++) { mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 8d54412..4fb4a3e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -427,6 +427,7 @@ struct mlx4_en_frag_info { #endif struct ethtool_flow_id { + struct list_head list; struct ethtool_rx_flow_spec flow_spec; u64 id; }; @@ -441,6 +442,8 @@ struct mlx4_en_priv { struct mlx4_en_port_state port_state; spinlock_t stats_lock; struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES]; + /* To allow rules removal while port is going down */ + struct list_head ethtool_list; unsigned long last_moder_packets[MAX_RX_RINGS]; unsigned long last_moder_tx_packets; -- cgit v0.10.2 From 23537b732f5dd9c917767419272aeb65cc4b8cfd Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 30 Jan 2013 23:07:09 +0000 Subject: net/mlx4_core: Use firmware driven flow steering hash mode The Firmware dynamically changes flow steering hash configuration from covering L2 only to "full" L2/L3/L4 mode needed. The dynamic change allows the driver to set hard coded hash configuration which is changed by the firmware from L2 to L2/L3/L4 when attaching the first L3/L4 flow steering rule and back to L2 when there are no more such rules. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 8b3d051..91acf71 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -1287,14 +1287,14 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param) /* Enable Ethernet flow steering * with udp unicast and tcp unicast */ - MLX4_PUT(inbox, param->fs_hash_enable_bits, + MLX4_PUT(inbox, (u8) (MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN), INIT_HCA_FS_ETH_BITS_OFFSET); MLX4_PUT(inbox, (u16) MLX4_FS_NUM_OF_L2_ADDR, INIT_HCA_FS_ETH_NUM_ADDRS_OFFSET); /* Enable IPoIB flow steering * with udp unicast and tcp unicast */ - MLX4_PUT(inbox, param->fs_hash_enable_bits, + MLX4_PUT(inbox, (u8) (MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN), INIT_HCA_FS_IB_BITS_OFFSET); MLX4_PUT(inbox, (u16) MLX4_FS_NUM_OF_L2_ADDR, INIT_HCA_FS_IB_NUM_ADDRS_OFFSET); diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h index dbf2f69..3af33ff 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.h +++ b/drivers/net/ethernet/mellanox/mlx4/fw.h @@ -171,7 +171,6 @@ struct mlx4_init_hca_param { u8 log_mpt_sz; u8 log_uar_sz; u8 uar_page_sz; /* log pg sz in 4k chunks */ - u8 fs_hash_enable_bits; u8 steering_mode; /* for QUERY_HCA */ u64 dev_cap_enabled; }; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index f1ee52d..e38c6b2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1415,22 +1415,6 @@ static int mlx4_init_hca(struct mlx4_dev *dev) if (mlx4_is_master(dev)) mlx4_parav_master_pf_caps(dev); - priv->fs_hash_mode = MLX4_FS_L2_HASH; - - switch (priv->fs_hash_mode) { - case MLX4_FS_L2_HASH: - init_hca.fs_hash_enable_bits = 0; - break; - - case MLX4_FS_L2_L3_L4_HASH: - /* Enable flow steering with - * udp unicast and tcp unicast - */ - init_hca.fs_hash_enable_bits = - MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN; - break; - } - profile = default_profile; if (dev->caps.steering_mode == MLX4_STEERING_MODE_DEVICE_MANAGED) diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 3263848..172daaa 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -60,11 +60,6 @@ #define MLX4_FS_MGM_LOG_ENTRY_SIZE 7 #define MLX4_FS_NUM_MCG (1 << 17) -enum { - MLX4_FS_L2_HASH = 0, - MLX4_FS_L2_L3_L4_HASH, -}; - #define MLX4_NUM_UP 8 #define MLX4_NUM_TC 8 #define MLX4_RATELIMIT_UNITS 3 /* 100 Mbps */ -- cgit v0.10.2 From 955154fa33df2b74f0fea8e7c84df6dfd954dab2 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Wed, 30 Jan 2013 23:07:10 +0000 Subject: net/mlx4_en: Don't reassign port mac address on firmware that supports it Mac reassignments should only be done when not supported by the firmware. To accomplish that, checking firmware capability bit to know whether we should reassign macs in the driver. Signed-off-by: Matan Barak Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 333a7a0..7b513e9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1285,7 +1285,8 @@ void mlx4_en_stop_port(struct net_device *dev) /* Unregister Mac address for the port */ mlx4_put_eth_qp(mdev->dev, priv->port, priv->mac, priv->base_qpn); - mdev->mac_removed[priv->port] = 1; + if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN)) + mdev->mac_removed[priv->port] = 1; /* Remove flow steering rules for the port*/ if (mdev->dev->caps.steering_mode == diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 91acf71..38b62c7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -127,7 +127,8 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags) [0] = "RSS support", [1] = "RSS Toeplitz Hash Function support", [2] = "RSS XOR Hash Function support", - [3] = "Device manage flow steering support" + [3] = "Device manage flow steering support", + [4] = "Automatic mac reassignment support" }; int i; @@ -478,6 +479,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) #define QUERY_DEV_CAP_BMME_FLAGS_OFFSET 0x94 #define QUERY_DEV_CAP_RSVD_LKEY_OFFSET 0x98 #define QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET 0xa0 +#define QUERY_DEV_CAP_FW_REASSIGN_MAC 0x9d dev_cap->flags2 = 0; mailbox = mlx4_alloc_cmd_mailbox(dev); @@ -637,6 +639,9 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) QUERY_DEV_CAP_BMME_FLAGS_OFFSET); MLX4_GET(dev_cap->reserved_lkey, outbox, QUERY_DEV_CAP_RSVD_LKEY_OFFSET); + MLX4_GET(field, outbox, QUERY_DEV_CAP_FW_REASSIGN_MAC); + if (field & 1<<6) + dev_cap->flags2 |= MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN; MLX4_GET(dev_cap->max_icm_sz, outbox, QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET); if (dev_cap->flags & MLX4_DEV_CAP_FLAG_COUNTERS) diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 20ea939..1883e8e 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -150,7 +150,8 @@ enum { MLX4_DEV_CAP_FLAG2_RSS = 1LL << 0, MLX4_DEV_CAP_FLAG2_RSS_TOP = 1LL << 1, MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2, - MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3 + MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3, + MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN = 1LL << 4 }; enum { -- cgit v0.10.2 From 3484aac16149636f0ba5b5b0789a2918c682db7e Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 30 Jan 2013 23:07:11 +0000 Subject: net/mlx4_en: Fix transmit timeout when driver restarts port Under heavy CPU load, changing, ring size/mtu/etc. could result in transmit timeout, since stop-start port might take more than 10 seconds. Calling netif_detach_device to prevent tx queue transmit timeout. netif_detach_device() is not called under ndo_stop, because netif_carrier_off will prevent the timeout, and device should not be marked as not present, or else user won't be able to start it later on. CC: Ben Hutchings Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 738e95d..911d488 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -496,7 +496,7 @@ static int mlx4_en_set_ringparam(struct net_device *dev, mutex_lock(&mdev->state_lock); if (priv->port_up) { port_up = 1; - mlx4_en_stop_port(dev); + mlx4_en_stop_port(dev, 1); } mlx4_en_free_resources(priv); @@ -591,7 +591,7 @@ static int mlx4_en_set_rxfh_indir(struct net_device *dev, mutex_lock(&mdev->state_lock); if (priv->port_up) { port_up = 1; - mlx4_en_stop_port(dev); + mlx4_en_stop_port(dev, 1); } priv->prof->rss_rings = rss_rings; @@ -1096,7 +1096,7 @@ static int mlx4_en_set_channels(struct net_device *dev, mutex_lock(&mdev->state_lock); if (priv->port_up) { port_up = 1; - mlx4_en_stop_port(dev); + mlx4_en_stop_port(dev, 1); } mlx4_en_free_resources(priv); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 7b513e9..ac1c14f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1178,6 +1178,8 @@ int mlx4_en_start_port(struct net_device *dev) priv->port_up = true; netif_tx_start_all_queues(dev); + netif_device_attach(dev); + return 0; tx_err: @@ -1200,7 +1202,7 @@ cq_err: } -void mlx4_en_stop_port(struct net_device *dev) +void mlx4_en_stop_port(struct net_device *dev, int detach) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; @@ -1216,9 +1218,13 @@ void mlx4_en_stop_port(struct net_device *dev) /* Synchronize with tx routine */ netif_tx_lock_bh(dev); + if (detach) + netif_device_detach(dev); netif_tx_stop_all_queues(dev); netif_tx_unlock_bh(dev); + netif_tx_disable(dev); + /* Set port as not active */ priv->port_up = false; @@ -1323,7 +1329,7 @@ static void mlx4_en_restart(struct work_struct *work) mutex_lock(&mdev->state_lock); if (priv->port_up) { - mlx4_en_stop_port(dev); + mlx4_en_stop_port(dev, 1); for (i = 0; i < priv->tx_ring_num; i++) netdev_tx_reset_queue(priv->tx_ring[i].tx_queue); if (mlx4_en_start_port(dev)) @@ -1395,7 +1401,7 @@ static int mlx4_en_close(struct net_device *dev) mutex_lock(&mdev->state_lock); - mlx4_en_stop_port(dev); + mlx4_en_stop_port(dev, 0); netif_carrier_off(dev); mutex_unlock(&mdev->state_lock); @@ -1533,7 +1539,7 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) * the port */ en_dbg(DRV, priv, "Change MTU called with card down!?\n"); } else { - mlx4_en_stop_port(dev); + mlx4_en_stop_port(dev, 1); err = mlx4_en_start_port(dev); if (err) { en_err(priv, "Failed restarting port:%d\n", diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 4fb4a3e..43f0165 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -539,7 +539,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_port_profile *prof); int mlx4_en_start_port(struct net_device *dev); -void mlx4_en_stop_port(struct net_device *dev); +void mlx4_en_stop_port(struct net_device *dev, int detach); void mlx4_en_free_resources(struct mlx4_en_priv *priv); int mlx4_en_alloc_resources(struct mlx4_en_priv *priv); -- cgit v0.10.2 From a786a7c0ad44985548118fd2370c792c0da36891 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 30 Jan 2013 21:49:29 -0500 Subject: wanrouter: completely decouple obsolete code from kernel. The original suggestion to delete wanrouter started earlier with the mainline commit f0d1b3c2bcc5de8a17af5f2274f7fcde8292b5fc ("net/wanrouter: Deprecate and schedule for removal") in May 2012. More importantly, Dan Carpenter found[1] that the driver had a fundamental breakage introduced back in 2008, with commit 7be6065b39c3 ("netdevice wanrouter: Convert directly reference of netdev->priv"). So we know with certainty that the code hasn't been used by anyone willing to at least take the effort to send an e-mail report of breakage for at least 4 years. This commit does a decouple of the wanrouter subsystem, by going after the Makefile/Kconfig and similar files, so that these mainline files that we are keeping do not have the big wanrouter file/driver deletion commit tied into their history. Once this commit is in place, we then can remove the obsolete cyclomx drivers and similar that have a dependency on CONFIG_WAN_ROUTER_DRIVERS. [1] http://www.spinics.net/lists/netdev/msg218670.html Originally-by: Joe Perches Cc: Dan Carpenter Cc: Arnaldo Carvalho de Melo Signed-off-by: Paul Gortmaker diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 2152b0e..3210540 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -179,7 +179,7 @@ Code Seq#(hex) Include File Comments 'V' C0 media/davinci/vpfe_capture.h conflict! 'V' C0 media/si4713.h conflict! 'W' 00-1F linux/watchdog.h conflict! -'W' 00-1F linux/wanrouter.h conflict! +'W' 00-1F linux/wanrouter.h conflict! (pre 3.9) 'W' 00-3F sound/asound.h conflict! 'X' all fs/xfs/xfs_fs.h conflict! and fs/xfs/linux-2.6/xfs_ioctl32.h diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt index 82761a3..76d80a6 100644 --- a/Documentation/magic-number.txt +++ b/Documentation/magic-number.txt @@ -122,7 +122,7 @@ SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c I810_CARD_MAGIC 0x5072696E i810_card sound/oss/i810_audio.c TRIDENT_CARD_MAGIC 0x5072696E trident_card sound/oss/trident.c -ROUTER_MAGIC 0x524d4157 wan_device include/linux/wanrouter.h +ROUTER_MAGIC 0x524d4157 wan_device [in wanrouter.h pre 3.9] SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h diff --git a/Documentation/zh_CN/magic-number.txt b/Documentation/zh_CN/magic-number.txt index 4263022..2ebe539 100644 --- a/Documentation/zh_CN/magic-number.txt +++ b/Documentation/zh_CN/magic-number.txt @@ -122,7 +122,7 @@ SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c I810_CARD_MAGIC 0x5072696E i810_card sound/oss/i810_audio.c TRIDENT_CARD_MAGIC 0x5072696E trident_card sound/oss/trident.c -ROUTER_MAGIC 0x524d4157 wan_device include/linux/wanrouter.h +ROUTER_MAGIC 0x524d4157 wan_device [in wanrouter.h pre 3.9] SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h diff --git a/drivers/isdn/i4l/isdn_x25iface.h b/drivers/isdn/i4l/isdn_x25iface.h index 0b26e3b..ca08e08 100644 --- a/drivers/isdn/i4l/isdn_x25iface.h +++ b/drivers/isdn/i4l/isdn_x25iface.h @@ -19,7 +19,6 @@ #endif #include -#include #include #include diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d58431e..0c077b0 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -356,60 +356,6 @@ config SDLA To compile this driver as a module, choose M here: the module will be called sdla. -# Wan router core. -config WAN_ROUTER_DRIVERS - tristate "WAN router drivers" - depends on WAN_ROUTER - ---help--- - Connect LAN to WAN via Linux box. - - Select driver your card and remember to say Y to "Wan Router." - You will need the wan-tools package which is available from - . - - Note that the answer to this question won't directly affect the - kernel except for how subordinate drivers may be built: - saying N will just cause the configurator to skip all - the questions about WAN router drivers. - - If unsure, say N. - -config CYCLADES_SYNC - tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" - depends on WAN_ROUTER_DRIVERS && (PCI || ISA) - ---help--- - Cyclom 2X from Cyclades Corporation is an - intelligent multiprotocol WAN adapter with data transfer rates up to - 512 Kbps. These cards support the X.25 and SNA related protocols. - - While no documentation is available at this time please grab the - wanconfig tarball in - (with minor changes - to make it compile with the current wanrouter include files; efforts - are being made to use the original package available at - ). - - Feel free to contact me or the cycsyn-devel mailing list at - and for - additional details, I hope to have documentation available as soon as - possible. (Cyclades Brazil is writing the Documentation). - - The next questions will ask you about the protocols you want the - driver to support (for now only X.25 is supported). - - If you have one or more of these cards, say Y to this option. - - To compile this driver as a module, choose M here: the - module will be called cyclomx. - -config CYCLOMX_X25 - bool "Cyclom 2X X.25 support (EXPERIMENTAL)" - depends on CYCLADES_SYNC - help - Connect a Cyclom 2X card to an X.25 network. - - Enabling X.25 support will enlarge your kernel by about 11 kB. - # X.25 network drivers config LAPBETHER tristate "LAPB over Ethernet driver (EXPERIMENTAL)" diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index df70248..c135ef4 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -5,10 +5,6 @@ # Rewritten to use lists instead of if-statements. # -cyclomx-y := cycx_main.o -cyclomx-$(CONFIG_CYCLOMX_X25) += cycx_x25.o -cyclomx-objs := $(cyclomx-y) - obj-$(CONFIG_HDLC) += hdlc.o obj-$(CONFIG_HDLC_RAW) += hdlc_raw.o obj-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o @@ -28,7 +24,6 @@ obj-$(CONFIG_LANMEDIA) += lmc/ obj-$(CONFIG_DLCI) += dlci.o obj-$(CONFIG_SDLA) += sdla.o -obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o obj-$(CONFIG_LAPBETHER) += lapbether.o obj-$(CONFIG_SBNI) += sbni.o obj-$(CONFIG_N2) += n2.o diff --git a/net/Kconfig b/net/Kconfig index 3cc5be0..c31348e 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -209,7 +209,6 @@ source "net/ipx/Kconfig" source "drivers/net/appletalk/Kconfig" source "net/x25/Kconfig" source "net/lapb/Kconfig" -source "net/wanrouter/Kconfig" source "net/phonet/Kconfig" source "net/ieee802154/Kconfig" source "net/mac802154/Kconfig" diff --git a/net/Makefile b/net/Makefile index 4f4ee08..c5aa8b3 100644 --- a/net/Makefile +++ b/net/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_BRIDGE) += bridge/ obj-$(CONFIG_NET_DSA) += dsa/ obj-$(CONFIG_IPX) += ipx/ obj-$(CONFIG_ATALK) += appletalk/ -obj-$(CONFIG_WAN_ROUTER) += wanrouter/ obj-$(CONFIG_X25) += x25/ obj-$(CONFIG_LAPB) += lapb/ obj-$(CONFIG_NETROM) += netrom/ diff --git a/net/socket.c b/net/socket.c index 2ca51c7..5c4d82c 100644 --- a/net/socket.c +++ b/net/socket.c @@ -69,7 +69,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 6fcdf4facb85e7d54ff6195378dd2ba8e0baccc4 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 30 Jan 2013 21:50:08 -0500 Subject: wanrouter: delete now orphaned header content, files/drivers The wanrouter support was identified earlier as unused for years, and so the previous commit totally decoupled it from the kernel, leaving the related wanrouter files present, but totally inert. Here we take the final step in that cleanup, by doing a wholesale removal of these files. The two step process is used so that the large deletion is decoupled from the git history of files that we still care about. The drivers deleted here all were dependent on the Kconfig setting CONFIG_WAN_ROUTER_DRIVERS. A stub wanrouter.h header (kernel & uapi) are left behind so that drivers/isdn/i4l/isdn_x25iface.c continues to compile, and so that we don't accidentally break userspace that expected these defines. Cc: Joe Perches Cc: Dan Carpenter Cc: Arnaldo Carvalho de Melo Signed-off-by: Paul Gortmaker diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c deleted file mode 100644 index 2a3ecae..0000000 --- a/drivers/net/wan/cycx_drv.c +++ /dev/null @@ -1,569 +0,0 @@ -/* -* cycx_drv.c Cyclom 2X Support Module. -* -* This module is a library of common hardware specific -* functions used by the Cyclades Cyclom 2X sync card. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdladrv.c by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code -* cleanup -* 1999/11/08 acme init_cyc2x deleted, doing nothing -* 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and -* fromio to use dpmbase ioremaped -* 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to -* & fromio -* 1999/10/23 acme cleanup to only supports cyclom2x: all the other -* boards are no longer manufactured by cyclades, -* if someone wants to support them... be my guest! -* 1999/05/28 acme cycx_intack & cycx_intde gone for good -* 1999/05/18 acme lots of unlogged work, submitting to Linus... -* 1999/01/03 acme more judicious use of data types -* 1999/01/03 acme judicious use of data types :> -* cycx_inten trying to reset pending interrupts -* from cyclom 2x - I think this isn't the way to -* go, but for now... -* 1999/01/02 acme cycx_intack ok, I think there's nothing to do -* to ack an int in cycx_drv.c, only handle it in -* cyx_isr (or in the other protocols: cyp_isr, -* cyf_isr, when they get implemented. -* Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing -* fingers to see x25_configure in cycx_x25.c -* work... :) -* Dec 26, 1998 acme load implementation fixed, seems to work! :) -* cycx_2x_dpmbase_options with all the possible -* DPM addresses (20). -* cycx_intr implemented (test this!) -* general code cleanup -* Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation. -* Aug 8, 1998 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include /* __init */ -#include -#include /* printk(), and other useful stuff */ -#include /* offsetof(), etc. */ -#include /* return codes */ -#include /* API definitions */ -#include /* CYCX firmware module definitions */ -#include /* udelay, msleep_interruptible */ -#include /* read[wl], write[wl], ioremap, iounmap */ - -#define MOD_VERSION 0 -#define MOD_RELEASE 6 - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver"); -MODULE_LICENSE("GPL"); - -/* Hardware-specific functions */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len); -static void cycx_bootcfg(struct cycx_hw *hw); - -static int reset_cyc2x(void __iomem *addr); -static int detect_cyc2x(void __iomem *addr); - -/* Miscellaneous functions */ -static int get_option_index(const long *optlist, long optval); -static u16 checksum(u8 *buf, u32 len); - -#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET) - -/* Global Data */ - -/* private data */ -static const char fullname[] = "Cyclom 2X Support Module"; -static const char copyright[] = - "(c) 1998-2003 Arnaldo Carvalho de Melo "; - -/* Hardware configuration options. - * These are arrays of configuration options used by verification routines. - * The first element of each array is its size (i.e. number of options). - */ -static const long cyc2x_dpmbase_options[] = { - 20, - 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000, - 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000, - 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000 -}; - -static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; - -/* Kernel Loadable Module Entry Points */ -/* Module 'insert' entry point. - * o print announcement - * o initialize static data - * - * Return: 0 Ok - * < 0 error. - * Context: process */ - -static int __init cycx_drv_init(void) -{ - pr_info("%s v%u.%u %s\n", - fullname, MOD_VERSION, MOD_RELEASE, copyright); - - return 0; -} - -/* Module 'remove' entry point. - * o release all remaining system resources */ -static void cycx_drv_cleanup(void) -{ -} - -/* Kernel APIs */ -/* Set up adapter. - * o detect adapter type - * o verify hardware configuration options - * o check for hardware conflicts - * o set up adapter shared memory - * o test adapter memory - * o load firmware - * Return: 0 ok. - * < 0 error */ -EXPORT_SYMBOL(cycx_setup); -int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) -{ - int err; - - /* Verify IRQ configuration options */ - if (!get_option_index(cycx_2x_irq_options, hw->irq)) { - pr_err("IRQ %d is invalid!\n", hw->irq); - return -EINVAL; - } - - /* Setup adapter dual-port memory window and test memory */ - if (!dpmbase) { - pr_err("you must specify the dpm address!\n"); - return -EINVAL; - } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) { - pr_err("memory address 0x%lX is invalid!\n", dpmbase); - return -EINVAL; - } - - hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE); - hw->dpmsize = CYCX_WINDOWSIZE; - - if (!detect_cyc2x(hw->dpmbase)) { - pr_err("adapter Cyclom 2X not found at address 0x%lX!\n", - dpmbase); - return -EINVAL; - } - - pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase); - - /* Load firmware. If loader fails then shut down adapter */ - err = load_cyc2x(hw, cfm, len); - - if (err) - cycx_down(hw); /* shutdown adapter */ - - return err; -} - -EXPORT_SYMBOL(cycx_down); -int cycx_down(struct cycx_hw *hw) -{ - iounmap(hw->dpmbase); - return 0; -} - -/* Enable interrupt generation. */ -static void cycx_inten(struct cycx_hw *hw) -{ - writeb(0, hw->dpmbase); -} - -/* Generate an interrupt to adapter's CPU. */ -EXPORT_SYMBOL(cycx_intr); -void cycx_intr(struct cycx_hw *hw) -{ - writew(0, hw->dpmbase + GEN_CYCX_INTR); -} - -/* Execute Adapter Command. - * o Set exec flag. - * o Busy-wait until flag is reset. */ -EXPORT_SYMBOL(cycx_exec); -int cycx_exec(void __iomem *addr) -{ - u16 i = 0; - /* wait till addr content is zeroed */ - - while (readw(addr)) { - udelay(1000); - - if (++i > 50) - return -1; - } - - return 0; -} - -/* Read absolute adapter memory. - * Transfer data from adapter's memory to data buffer. */ -EXPORT_SYMBOL(cycx_peek); -int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - *(u8*)buf = readb(hw->dpmbase + addr); - else - memcpy_fromio(buf, hw->dpmbase + addr, len); - - return 0; -} - -/* Write Absolute Adapter Memory. - * Transfer data from data buffer to adapter's memory. */ -EXPORT_SYMBOL(cycx_poke); -int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - writeb(*(u8*)buf, hw->dpmbase + addr); - else - memcpy_toio(hw->dpmbase + addr, buf, len); - - return 0; -} - -/* Hardware-Specific Functions */ - -/* Load Aux Routines */ -/* Reset board hardware. - return 1 if memory exists at addr and 0 if not. */ -static int memory_exists(void __iomem *addr) -{ - int tries = 0; - - for (; tries < 3 ; tries++) { - writew(TEST_PATTERN, addr + 0x10); - - if (readw(addr + 0x10) == TEST_PATTERN) - if (readw(addr + 0x10) == TEST_PATTERN) - return 1; - - msleep_interruptible(1 * 1000); - } - - return 0; -} - -/* Load reset code. */ -static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - void __iomem *pt_code = addr + RESET_OFFSET; - u16 i; /*, j; */ - - for (i = 0 ; i < cnt ; i++) { -/* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */ - writeb(*buffer++, pt_code++); - } -} - -/* Load buffer using boot interface. - * o copy data from buffer to Cyclom-X memory - * o wait for reset code to copy it to right portion of memory */ -static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - memcpy_toio(addr + DATA_OFFSET, buffer, cnt); - writew(GEN_BOOT_DAT, addr + CMD_OFFSET); - - return wait_cyc(addr); -} - -/* Set up entry point and kick start Cyclom-X CPU. */ -static void cycx_start(void __iomem *addr) -{ - /* put in 0x30 offset the jump instruction to the code entry point */ - writeb(0xea, addr + 0x30); - writeb(0x00, addr + 0x31); - writeb(0xc4, addr + 0x32); - writeb(0x00, addr + 0x33); - writeb(0x00, addr + 0x34); - - /* cmd to start executing code */ - writew(GEN_START, addr + CMD_OFFSET); -} - -/* Load and boot reset code. */ -static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_start = addr + START_OFFSET; - - writeb(0xea, pt_start++); /* jmp to f000:3f00 */ - writeb(0x00, pt_start++); - writeb(0xfc, pt_start++); - writeb(0x00, pt_start++); - writeb(0xf0, pt_start); - reset_load(addr, code, len); - - /* 80186 was in hold, go */ - writeb(0, addr + START_CPU); - msleep_interruptible(1 * 1000); -} - -/* Load data.bin file through boot (reset) interface. */ -static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0, pt_boot_cmd + sizeof(u16)); - writew(0x4000, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - - -/* Load code.bin file through boot (reset) interface. */ -static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0x0000, pt_boot_cmd + sizeof(u16)); - writew(0xc400, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - -/* Load adapter from the memory image of the CYCX firmware module. - * o verify firmware integrity and compatibility - * o start adapter up */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) -{ - int i, j; - struct cycx_fw_header *img_hdr; - u8 *reset_image, - *data_image, - *code_image; - void __iomem *pt_cycld = hw->dpmbase + 0x400; - u16 cksum; - - /* Announce */ - pr_info("firmware signature=\"%s\"\n", cfm->signature); - - /* Verify firmware signature */ - if (strcmp(cfm->signature, CFM_SIGNATURE)) { - pr_err("load_cyc2x: not Cyclom-2X firmware!\n"); - return -EINVAL; - } - - pr_info("firmware version=%u\n", cfm->version); - - /* Verify firmware module format version */ - if (cfm->version != CFM_VERSION) { - pr_err("%s: firmware format %u rejected! Expecting %u.\n", - __func__, cfm->version, CFM_VERSION); - return -EINVAL; - } - - /* Verify firmware module length and checksum */ - cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) + - cfm->info.codesize); -/* - FIXME cfm->info.codesize is off by 2 - if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) || -*/ - if (cksum != cfm->checksum) { - pr_err("%s: firmware corrupted!\n", __func__); - pr_err(" cdsize = 0x%x (expected 0x%lx)\n", - len - (int)sizeof(struct cycx_firmware) - 1, - cfm->info.codesize); - pr_err(" chksum = 0x%x (expected 0x%x)\n", - cksum, cfm->checksum); - return -EINVAL; - } - - /* If everything is ok, set reset, data and code pointers */ - img_hdr = (struct cycx_fw_header *)&cfm->image; -#ifdef FIRMWARE_DEBUG - pr_info("%s: image sizes\n", __func__); - pr_info(" reset=%lu\n", img_hdr->reset_size); - pr_info(" data=%lu\n", img_hdr->data_size); - pr_info(" code=%lu\n", img_hdr->code_size); -#endif - reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header); - data_image = reset_image + img_hdr->reset_size; - code_image = data_image + img_hdr->data_size; - - /*---- Start load ----*/ - /* Announce */ - pr_info("loading firmware %s (ID=%u)...\n", - cfm->descr[0] ? cfm->descr : "unknown firmware", - cfm->info.codeid); - - for (i = 0 ; i < 5 ; i++) { - /* Reset Cyclom hardware */ - if (!reset_cyc2x(hw->dpmbase)) { - pr_err("dpm problem or board not found\n"); - return -EINVAL; - } - - /* Load reset.bin */ - cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size); - /* reset is waiting for boot */ - writew(GEN_POWER_ON, pt_cycld); - msleep_interruptible(1 * 1000); - - for (j = 0 ; j < 3 ; j++) - if (!readw(pt_cycld)) - goto reset_loaded; - else - msleep_interruptible(1 * 1000); - } - - pr_err("reset not started\n"); - return -EINVAL; - -reset_loaded: - /* Load data.bin */ - if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) { - pr_err("cannot load data file\n"); - return -EINVAL; - } - - /* Load code.bin */ - if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) { - pr_err("cannot load code file\n"); - return -EINVAL; - } - - /* Prepare boot-time configuration data */ - cycx_bootcfg(hw); - - /* kick-off CPU */ - cycx_start(hw->dpmbase); - - /* Arthur Ganzert's tip: wait a while after the firmware loading... - seg abr 26 17:17:12 EST 1999 - acme */ - msleep_interruptible(7 * 1000); - pr_info("firmware loaded!\n"); - - /* enable interrupts */ - cycx_inten(hw); - - return 0; -} - -/* Prepare boot-time firmware configuration data. - * o initialize configuration data area - From async.doc - V_3.4.0 - 07/18/1994 - - As of now, only static buffers are available to the user. - So, the bit VD_RXDIRC must be set in 'valid'. That means that user - wants to use the static transmission and reception buffers. */ -static void cycx_bootcfg(struct cycx_hw *hw) -{ - /* use fixed buffers */ - writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET); -} - -/* Detect Cyclom 2x adapter. - * Following tests are used to detect Cyclom 2x adapter: - * to be completed based on the tests done below - * Return 1 if detected o.k. or 0 if failed. - * Note: This test is destructive! Adapter will be left in shutdown - * state after the test. */ -static int detect_cyc2x(void __iomem *addr) -{ - reset_cyc2x(addr); - - return memory_exists(addr); -} - -/* Miscellaneous */ -/* Get option's index into the options list. - * Return option's index (1 .. N) or zero if option is invalid. */ -static int get_option_index(const long *optlist, long optval) -{ - int i = 1; - - for (; i <= optlist[0]; ++i) - if (optlist[i] == optval) - return i; - - return 0; -} - -/* Reset adapter's CPU. */ -static int reset_cyc2x(void __iomem *addr) -{ - writeb(0, addr + RST_ENABLE); - msleep_interruptible(2 * 1000); - writeb(0, addr + RST_DISABLE); - msleep_interruptible(2 * 1000); - - return memory_exists(addr); -} - -/* Calculate 16-bit CRC using CCITT polynomial. */ -static u16 checksum(u8 *buf, u32 len) -{ - u16 crc = 0; - u16 mask, flag; - - for (; len; --len, ++buf) - for (mask = 0x80; mask; mask >>= 1) { - flag = (crc & 0x8000); - crc <<= 1; - crc |= ((*buf & mask) ? 1 : 0); - - if (flag) - crc ^= 0x1021; - } - - return crc; -} - -module_init(cycx_drv_init); -module_exit(cycx_drv_cleanup); - -/* End */ diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c deleted file mode 100644 index 81fbbad..0000000 --- a/drivers/net/wan/cycx_main.c +++ /dev/null @@ -1,346 +0,0 @@ -/* -* cycx_main.c Cyclades Cyclom 2X WAN Link Driver. Main module. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdlamain.c by Gene Kozin & -* Jaspreet Singh -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Please look at the bitkeeper changelog (or any other scm tool that ends up -* importing bitkeeper changelog or that replaces bitkeeper in the future as -* main tool for linux development). -* -* 2001/05/09 acme Fix MODULE_DESC for debug, .bss nitpicks, -* some cleanups -* 2000/07/13 acme remove useless #ifdef MODULE and crap -* #if KERNEL_VERSION > blah -* 2000/07/06 acme __exit at cyclomx_cleanup -* 2000/04/02 acme dprintk and cycx_debug -* module_init/module_exit -* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count -* and cyclomx_close to cyclomx_mod_dec_use_count -* 2000/01/08 acme cleanup -* 1999/11/06 acme cycx_down back to life (it needs to be -* called to iounmap the dpmbase) -* 1999/08/09 acme removed references to enable_tx_int -* use spinlocks instead of cli/sti in -* cyclomx_set_state -* 1999/05/19 acme works directly linked into the kernel -* init_waitqueue_head for 2.3.* kernel -* 1999/05/18 acme major cleanup (polling not needed), etc -* 1998/08/28 acme minor cleanup (ioctls for firmware deleted) -* queue_task activated -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include /* offsetof(), etc. */ -#include /* return codes */ -#include /* inline memset(), etc. */ -#include /* kmalloc(), kfree() */ -#include /* printk(), and other useful stuff */ -#include /* support for loadable modules */ -#include /* request_region(), release_region() */ -#include /* WAN router definitions */ -#include /* cyclomx common user API definitions */ -#include /* __init (when not using as a module) */ -#include - -unsigned int cycx_debug; - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver."); -MODULE_LICENSE("GPL"); -module_param(cycx_debug, int, 0); -MODULE_PARM_DESC(cycx_debug, "cyclomx debug level"); - -/* Defines & Macros */ - -#define CYCX_DRV_VERSION 0 /* version number */ -#define CYCX_DRV_RELEASE 11 /* release (minor version) number */ -#define CYCX_MAX_CARDS 1 /* max number of adapters */ - -#define CONFIG_CYCX_CARDS 1 - -/* Function Prototypes */ - -/* WAN link driver entry points */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf); -static int cycx_wan_shutdown(struct wan_device *wandev); - -/* Miscellaneous functions */ -static irqreturn_t cycx_isr(int irq, void *dev_id); - -/* Global Data - * Note: All data must be explicitly initialized!!! - */ - -/* private data */ -static const char cycx_drvname[] = "cyclomx"; -static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver"; -static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " - ""; -static int cycx_ncards = CONFIG_CYCX_CARDS; -static struct cycx_device *cycx_card_array; /* adapter data space */ - -/* Kernel Loadable Module Entry Points */ - -/* - * Module 'insert' entry point. - * o print announcement - * o allocate adapter data space - * o initialize static data - * o register all cards with WAN router - * o calibrate Cyclom 2X shared memory access delay. - * - * Return: 0 Ok - * < 0 error. - * Context: process - */ -static int __init cycx_init(void) -{ - int cnt, err = -ENOMEM; - - pr_info("%s v%u.%u %s\n", - cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE, - cycx_copyright); - - /* Verify number of cards and allocate adapter data space */ - cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS); - cycx_ncards = max_t(int, cycx_ncards, 1); - cycx_card_array = kcalloc(cycx_ncards, sizeof(struct cycx_device), GFP_KERNEL); - if (!cycx_card_array) - goto out; - - - /* Register adapters with WAN router */ - for (cnt = 0; cnt < cycx_ncards; ++cnt) { - struct cycx_device *card = &cycx_card_array[cnt]; - struct wan_device *wandev = &card->wandev; - - sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1); - wandev->magic = ROUTER_MAGIC; - wandev->name = card->devname; - wandev->private = card; - wandev->setup = cycx_wan_setup; - wandev->shutdown = cycx_wan_shutdown; - err = register_wan_device(wandev); - - if (err) { - pr_err("%s registration failed with error %d!\n", - card->devname, err); - break; - } - } - - err = -ENODEV; - if (!cnt) { - kfree(cycx_card_array); - goto out; - } - err = 0; - cycx_ncards = cnt; /* adjust actual number of cards */ -out: return err; -} - -/* - * Module 'remove' entry point. - * o unregister all adapters from the WAN router - * o release all remaining system resources - */ -static void __exit cycx_exit(void) -{ - int i = 0; - - for (; i < cycx_ncards; ++i) { - struct cycx_device *card = &cycx_card_array[i]; - unregister_wan_device(card->devname); - } - - kfree(cycx_card_array); -} - -/* WAN Device Driver Entry Points */ -/* - * Setup/configure WAN link driver. - * o check adapter state - * o make sure firmware is present in configuration - * o allocate interrupt vector - * o setup Cyclom 2X hardware - * o call appropriate routine to perform protocol-specific initialization - * - * This function is called when router handles ROUTER_SETUP IOCTL. The - * configuration structure is in kernel memory (including extended data, if - * any). - */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) -{ - int rc = -EFAULT; - struct cycx_device *card; - int irq; - - /* Sanity checks */ - - if (!wandev || !wandev->private || !conf) - goto out; - - card = wandev->private; - rc = -EBUSY; - if (wandev->state != WAN_UNCONFIGURED) - goto out; - - rc = -EINVAL; - if (!conf->data_size || !conf->data) { - pr_err("%s: firmware not found in configuration data!\n", - wandev->name); - goto out; - } - - if (conf->irq <= 0) { - pr_err("%s: can't configure without IRQ!\n", wandev->name); - goto out; - } - - /* Allocate IRQ */ - irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ - - if (request_irq(irq, cycx_isr, 0, wandev->name, card)) { - pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq); - goto out; - } - - /* Configure hardware, load firmware, etc. */ - memset(&card->hw, 0, sizeof(card->hw)); - card->hw.irq = irq; - card->hw.dpmsize = CYCX_WINDOWSIZE; - card->hw.fwid = CFID_X25_2X; - spin_lock_init(&card->lock); - init_waitqueue_head(&card->wait_stats); - - rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr); - if (rc) - goto out_irq; - - /* Initialize WAN device data space */ - wandev->irq = irq; - wandev->dma = wandev->ioport = 0; - wandev->maddr = (unsigned long)card->hw.dpmbase; - wandev->msize = card->hw.dpmsize; - wandev->hw_opt[2] = 0; - wandev->hw_opt[3] = card->hw.fwid; - - /* Protocol-specific initialization */ - switch (card->hw.fwid) { -#ifdef CONFIG_CYCLOMX_X25 - case CFID_X25_2X: - rc = cycx_x25_wan_init(card, conf); - break; -#endif - default: - pr_err("%s: this firmware is not supported!\n", wandev->name); - rc = -EINVAL; - } - - if (rc) { - cycx_down(&card->hw); - goto out_irq; - } - - rc = 0; -out: - return rc; -out_irq: - free_irq(irq, card); - goto out; -} - -/* - * Shut down WAN link driver. - * o shut down adapter hardware - * o release system resources. - * - * This function is called by the router when device is being unregistered or - * when it handles ROUTER_DOWN IOCTL. - */ -static int cycx_wan_shutdown(struct wan_device *wandev) -{ - int ret = -EFAULT; - struct cycx_device *card; - - /* sanity checks */ - if (!wandev || !wandev->private) - goto out; - - ret = 0; - if (wandev->state == WAN_UNCONFIGURED) - goto out; - - card = wandev->private; - wandev->state = WAN_UNCONFIGURED; - cycx_down(&card->hw); - pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq); - free_irq(wandev->irq, card); -out: return ret; -} - -/* Miscellaneous */ -/* - * Cyclom 2X Interrupt Service Routine. - * o acknowledge Cyclom 2X hardware interrupt. - * o call protocol-specific interrupt service routine, if any. - */ -static irqreturn_t cycx_isr(int irq, void *dev_id) -{ - struct cycx_device *card = dev_id; - - if (card->wandev.state == WAN_UNCONFIGURED) - goto out; - - if (card->in_isr) { - pr_warn("%s: interrupt re-entrancy on IRQ %d!\n", - card->devname, card->wandev.irq); - goto out; - } - - if (card->isr) - card->isr(card); - return IRQ_HANDLED; -out: - return IRQ_NONE; -} - -/* Set WAN device state. */ -void cycx_set_state(struct cycx_device *card, int state) -{ - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (card->wandev.state != state) { - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - break; - } - pr_info("%s: link %s\n", card->devname, string_state); - card->wandev.state = state; - } - - card->state_tick = jiffies; - spin_unlock_irqrestore(&card->lock, flags); -} - -module_init(cycx_init); -module_exit(cycx_exit); diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c deleted file mode 100644 index 06f3f63..0000000 --- a/drivers/net/wan/cycx_x25.c +++ /dev/null @@ -1,1602 +0,0 @@ -/* -* cycx_x25.c Cyclom 2X WAN Link Driver. X.25 module. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdla_x25.c by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 2001/01/12 acme use dev_kfree_skb_irq on interrupt context -* 2000/04/02 acme dprintk, cycx_debug -* fixed the bug introduced in get_dev_by_lcn and -* get_dev_by_dte_addr by the anonymous hacker -* that converted this driver to softnet -* 2000/01/08 acme cleanup -* 1999/10/27 acme use ARPHRD_HWX25 so that the X.25 stack know -* that we have a X.25 stack implemented in -* firmware onboard -* 1999/10/18 acme support for X.25 sockets in if_send, -* beware: socket(AF_X25...) IS WORK IN PROGRESS, -* TCP/IP over X.25 via wanrouter not affected, -* working. -* 1999/10/09 acme chan_disc renamed to chan_disconnect, -* began adding support for X.25 sockets: -* conf->protocol in new_if -* 1999/10/05 acme fixed return E... to return -E... -* 1999/08/10 acme serialized access to the card thru a spinlock -* in x25_exec -* 1999/08/09 acme removed per channel spinlocks -* removed references to enable_tx_int -* 1999/05/28 acme fixed nibble_to_byte, ackvc now properly treated -* if_send simplified -* 1999/05/25 acme fixed t1, t2, t21 & t23 configuration -* use spinlocks instead of cli/sti in some points -* 1999/05/24 acme finished the x25_get_stat function -* 1999/05/23 acme dev->type = ARPHRD_X25 (tcpdump only works, -* AFAIT, with ARPHRD_ETHER). This seems to be -* needed to use socket(AF_X25)... -* Now the config file must specify a peer media -* address for svc channels over a crossover cable. -* Removed hold_timeout from x25_channel_t, -* not used. -* A little enhancement in the DEBUG processing -* 1999/05/22 acme go to DISCONNECTED in disconnect_confirm_intr, -* instead of chan_disc. -* 1999/05/16 marcelo fixed timer initialization in SVCs -* 1999/01/05 acme x25_configure now get (most of) all -* parameters... -* 1999/01/05 acme pktlen now (correctly) uses log2 (value -* configured) -* 1999/01/03 acme judicious use of data types (u8, u16, u32, etc) -* 1999/01/03 acme cyx_isr: reset dpmbase to acknowledge -* indication (interrupt from cyclom 2x) -* 1999/01/02 acme cyx_isr: first hackings... -* 1999/01/0203 acme when initializing an array don't give less -* elements than declared... -* example: char send_cmd[6] = "?\xFF\x10"; -* you'll gonna lose a couple hours, 'cause your -* brain won't admit that there's an error in the -* above declaration... the side effect is that -* memset is put into the unresolved symbols -* instead of using the inline memset functions... -* 1999/01/02 acme began chan_connect, chan_send, x25_send -* 1998/12/31 acme x25_configure -* this code can be compiled as non module -* 1998/12/27 acme code cleanup -* IPX code wiped out! let's decrease code -* complexity for now, remember: I'm learning! :) -* bps_to_speed_code OK -* 1998/12/26 acme Minimal debug code cleanup -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define CYCLOMX_X25_DEBUG 1 - -#include /* isdigit() */ -#include /* return codes */ -#include /* ARPHRD_HWX25 */ -#include /* printk(), and other useful stuff */ -#include -#include /* inline memset(), etc. */ -#include -#include /* kmalloc(), kfree() */ -#include /* offsetof(), etc. */ -#include /* WAN router definitions */ - -#include /* htons(), etc. */ - -#include /* Cyclom 2X common user API definitions */ -#include /* X.25 firmware API definitions */ - -#include - -/* Defines & Macros */ -#define CYCX_X25_MAX_CMD_RETRY 5 -#define CYCX_X25_CHAN_MTU 2048 /* unfragmented logical channel MTU */ - -/* Data Structures */ -/* This is an extension of the 'struct net_device' we create for each network - interface to keep the rest of X.25 channel-specific data. */ -struct cycx_x25_channel { - /* This member must be first. */ - struct net_device *slave; /* WAN slave */ - - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char *local_addr; /* local media address, ASCIIZ - - svc thru crossover cable */ - s16 lcn; /* logical channel number/conn.req.key*/ - u8 link; - struct timer_list timer; /* timer used for svc channel disc. */ - u16 protocol; /* ethertype, 0 - multiplexed */ - u8 svc; /* 0 - permanent, 1 - switched */ - u8 state; /* channel state */ - u8 drop_sequence; /* mark sequence for dropping */ - u32 idle_tmout; /* sec, before disconnecting */ - struct sk_buff *rx_skb; /* receive socket buffer */ - struct cycx_device *card; /* -> owner */ - struct net_device_stats ifstats;/* interface statistics */ -}; - -/* Function Prototypes */ -/* WAN link driver entry points. These are called by the WAN router module. */ -static int cycx_wan_update(struct wan_device *wandev), - cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf), - cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev); - -/* Network device interface */ -static int cycx_netdevice_init(struct net_device *dev); -static int cycx_netdevice_open(struct net_device *dev); -static int cycx_netdevice_stop(struct net_device *dev); -static int cycx_netdevice_hard_header(struct sk_buff *skb, - struct net_device *dev, u16 type, - const void *daddr, const void *saddr, - unsigned len); -static int cycx_netdevice_rebuild_header(struct sk_buff *skb); -static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev); - -static struct net_device_stats * - cycx_netdevice_get_stats(struct net_device *dev); - -/* Interrupt handlers */ -static void cycx_x25_irq_handler(struct cycx_device *card), - cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd), - cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd), - cycx_x25_irq_log(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_stat(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_connect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_disconnect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_connect(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_disconnect(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_spurious(struct cycx_device *card, - struct cycx_x25_cmd *cmd); - -/* X.25 firmware interface functions */ -static int cycx_x25_configure(struct cycx_device *card, - struct cycx_x25_config *conf), - cycx_x25_get_stats(struct cycx_device *card), - cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm, - int len, void *buf), - cycx_x25_connect_response(struct cycx_device *card, - struct cycx_x25_channel *chan), - cycx_x25_disconnect_response(struct cycx_device *card, u8 link, - u8 lcn); - -/* channel functions */ -static int cycx_x25_chan_connect(struct net_device *dev), - cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb); - -static void cycx_x25_chan_disconnect(struct net_device *dev), - cycx_x25_chan_send_event(struct net_device *dev, u8 event); - -/* Miscellaneous functions */ -static void cycx_x25_set_chan_state(struct net_device *dev, u8 state), - cycx_x25_chan_timer(unsigned long d); - -static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble), - reset_timer(struct net_device *dev); - -static u8 bps_to_speed_code(u32 bps); -static u8 cycx_log2(u32 n); - -static unsigned dec_to_uint(u8 *str, int len); - -static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev, - s16 lcn); -static struct net_device * - cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte); - -static void cycx_x25_chan_setup(struct net_device *dev); - -#ifdef CYCLOMX_X25_DEBUG -static void hex_dump(char *msg, unsigned char *p, int len); -static void cycx_x25_dump_config(struct cycx_x25_config *conf); -static void cycx_x25_dump_stats(struct cycx_x25_stats *stats); -static void cycx_x25_dump_devs(struct wan_device *wandev); -#else -#define hex_dump(msg, p, len) -#define cycx_x25_dump_config(conf) -#define cycx_x25_dump_stats(stats) -#define cycx_x25_dump_devs(wandev) -#endif -/* Public Functions */ - -/* X.25 Protocol Initialization routine. - * - * This routine is called by the main Cyclom 2X module during setup. At this - * point adapter is completely initialized and X.25 firmware is running. - * o configure adapter - * o initialize protocol-specific fields of the adapter data space. - * - * Return: 0 o.k. - * < 0 failure. */ -int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf) -{ - struct cycx_x25_config cfg; - - /* Verify configuration ID */ - if (conf->config_id != WANCONFIG_X25) { - pr_info("%s: invalid configuration ID %u!\n", - card->devname, conf->config_id); - return -EINVAL; - } - - /* Initialize protocol-specific fields */ - card->mbox = card->hw.dpmbase + X25_MBOX_OFFS; - card->u.x.connection_keys = 0; - spin_lock_init(&card->u.x.lock); - - /* Configure adapter. Here we set reasonable defaults, then parse - * device configuration structure and set configuration options. - * Most configuration options are verified and corrected (if - * necessary) since we can't rely on the adapter to do so and don't - * want it to fail either. */ - memset(&cfg, 0, sizeof(cfg)); - cfg.link = 0; - cfg.clock = conf->clocking == WANOPT_EXTERNAL ? 8 : 55; - cfg.speed = bps_to_speed_code(conf->bps); - cfg.n3win = 7; - cfg.n2win = 2; - cfg.n2 = 5; - cfg.nvc = 1; - cfg.npvc = 1; - cfg.flags = 0x02; /* default = V35 */ - cfg.t1 = 10; /* line carrier timeout */ - cfg.t2 = 29; /* tx timeout */ - cfg.t21 = 180; /* CALL timeout */ - cfg.t23 = 180; /* CLEAR timeout */ - - /* adjust MTU */ - if (!conf->mtu || conf->mtu >= 512) - card->wandev.mtu = 512; - else if (conf->mtu >= 256) - card->wandev.mtu = 256; - else if (conf->mtu >= 128) - card->wandev.mtu = 128; - else - card->wandev.mtu = 64; - - cfg.pktlen = cycx_log2(card->wandev.mtu); - - if (conf->station == WANOPT_DTE) { - cfg.locaddr = 3; /* DTE */ - cfg.remaddr = 1; /* DCE */ - } else { - cfg.locaddr = 1; /* DCE */ - cfg.remaddr = 3; /* DTE */ - } - - if (conf->interface == WANOPT_RS232) - cfg.flags = 0; /* FIXME just reset the 2nd bit */ - - if (conf->u.x25.hi_pvc) { - card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, 4095); - card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc); - } - - if (conf->u.x25.hi_svc) { - card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, 4095); - card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc); - } - - if (card->u.x.lo_pvc == 255) - cfg.npvc = 0; - else - cfg.npvc = card->u.x.hi_pvc - card->u.x.lo_pvc + 1; - - cfg.nvc = card->u.x.hi_svc - card->u.x.lo_svc + 1 + cfg.npvc; - - if (conf->u.x25.hdlc_window) - cfg.n2win = min_t(unsigned int, conf->u.x25.hdlc_window, 7); - - if (conf->u.x25.pkt_window) - cfg.n3win = min_t(unsigned int, conf->u.x25.pkt_window, 7); - - if (conf->u.x25.t1) - cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30); - - if (conf->u.x25.t2) - cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 30); - - if (conf->u.x25.t11_t21) - cfg.t21 = min_t(unsigned int, conf->u.x25.t11_t21, 30); - - if (conf->u.x25.t13_t23) - cfg.t23 = min_t(unsigned int, conf->u.x25.t13_t23, 30); - - if (conf->u.x25.n2) - cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30); - - /* initialize adapter */ - if (cycx_x25_configure(card, &cfg)) - return -EIO; - - /* Initialize protocol-specific fields of adapter data space */ - card->wandev.bps = conf->bps; - card->wandev.interface = conf->interface; - card->wandev.clocking = conf->clocking; - card->wandev.station = conf->station; - card->isr = cycx_x25_irq_handler; - card->exec = NULL; - card->wandev.update = cycx_wan_update; - card->wandev.new_if = cycx_wan_new_if; - card->wandev.del_if = cycx_wan_del_if; - card->wandev.state = WAN_DISCONNECTED; - - return 0; -} - -/* WAN Device Driver Entry Points */ -/* Update device status & statistics. */ -static int cycx_wan_update(struct wan_device *wandev) -{ - /* sanity checks */ - if (!wandev || !wandev->private) - return -EFAULT; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - cycx_x25_get_stats(wandev->private); - - return 0; -} - -/* Create new logical channel. - * This routine is called by the router when ROUTER_IFNEW IOCTL is being - * handled. - * o parse media- and hardware-specific configuration - * o make sure that a new channel can be created - * o allocate resources, if necessary - * o prepare network device structure for registration. - * - * Return: 0 o.k. - * < 0 failure (channel will not be created) */ -static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf) -{ - struct cycx_device *card = wandev->private; - struct cycx_x25_channel *chan; - int err = 0; - - if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) { - pr_info("%s: invalid interface name!\n", card->devname); - return -EINVAL; - } - - dev = alloc_netdev(sizeof(struct cycx_x25_channel), conf->name, - cycx_x25_chan_setup); - if (!dev) - return -ENOMEM; - - chan = netdev_priv(dev); - strcpy(chan->name, conf->name); - chan->card = card; - chan->link = conf->port; - chan->protocol = conf->protocol ? ETH_P_X25 : ETH_P_IP; - chan->rx_skb = NULL; - /* only used in svc connected thru crossover cable */ - chan->local_addr = NULL; - - if (conf->addr[0] == '@') { /* SVC */ - int len = strlen(conf->local_addr); - - if (len) { - if (len > WAN_ADDRESS_SZ) { - pr_err("%s: %s local addr too long!\n", - wandev->name, chan->name); - err = -EINVAL; - goto error; - } else { - chan->local_addr = kmalloc(len + 1, GFP_KERNEL); - - if (!chan->local_addr) { - err = -ENOMEM; - goto error; - } - } - - strncpy(chan->local_addr, conf->local_addr, - WAN_ADDRESS_SZ); - } - - chan->svc = 1; - strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ); - init_timer(&chan->timer); - chan->timer.function = cycx_x25_chan_timer; - chan->timer.data = (unsigned long)dev; - - /* Set channel timeouts (default if not specified) */ - chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90; - } else if (isdigit(conf->addr[0])) { /* PVC */ - s16 lcn = dec_to_uint(conf->addr, 0); - - if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc) - chan->lcn = lcn; - else { - pr_err("%s: PVC %u is out of range on interface %s!\n", - wandev->name, lcn, chan->name); - err = -EINVAL; - goto error; - } - } else { - pr_err("%s: invalid media address on interface %s!\n", - wandev->name, chan->name); - err = -EINVAL; - goto error; - } - - return 0; - -error: - free_netdev(dev); - return err; -} - -/* Delete logical channel. */ -static int cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) { - kfree(chan->local_addr); - if (chan->state == WAN_CONNECTED) - del_timer(&chan->timer); - } - - return 0; -} - - -/* Network Device Interface */ - -static const struct header_ops cycx_header_ops = { - .create = cycx_netdevice_hard_header, - .rebuild = cycx_netdevice_rebuild_header, -}; - -static const struct net_device_ops cycx_netdev_ops = { - .ndo_init = cycx_netdevice_init, - .ndo_open = cycx_netdevice_open, - .ndo_stop = cycx_netdevice_stop, - .ndo_start_xmit = cycx_netdevice_hard_start_xmit, - .ndo_get_stats = cycx_netdevice_get_stats, -}; - -static void cycx_x25_chan_setup(struct net_device *dev) -{ - /* Initialize device driver entry points */ - dev->netdev_ops = &cycx_netdev_ops; - dev->header_ops = &cycx_header_ops; - - /* Initialize media-specific parameters */ - dev->mtu = CYCX_X25_CHAN_MTU; - dev->type = ARPHRD_HWX25; /* ARP h/w type */ - dev->hard_header_len = 0; /* media header length */ - dev->addr_len = 0; /* hardware address length */ -} - -/* Initialize Linux network interface. - * - * This routine is called only once for each interface, during Linux network - * interface registration. Returning anything but zero will fail interface - * registration. */ -static int cycx_netdevice_init(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - struct wan_device *wandev = &card->wandev; - - if (!chan->svc) - *(__be16*)dev->dev_addr = htons(chan->lcn); - - /* Initialize hardware parameters (just for reference) */ - dev->irq = wandev->irq; - dev->dma = wandev->dma; - dev->base_addr = wandev->ioport; - dev->mem_start = (unsigned long)wandev->maddr; - dev->mem_end = (unsigned long)(wandev->maddr + - wandev->msize - 1); - dev->flags |= IFF_NOARP; - - /* Set transmit buffer queue length */ - dev->tx_queue_len = 10; - - /* Initialize socket buffers */ - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); - - return 0; -} - -/* Open network interface. - * o prevent module from unloading by incrementing use count - * o if link is disconnected then initiate connection - * - * Return 0 if O.k. or errno. */ -static int cycx_netdevice_open(struct net_device *dev) -{ - if (netif_running(dev)) - return -EBUSY; /* only one open is allowed */ - - netif_start_queue(dev); - return 0; -} - -/* Close network interface. - * o reset flags. - * o if there's no more open channels then disconnect physical link. */ -static int cycx_netdevice_stop(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - netif_stop_queue(dev); - - if (chan->state == WAN_CONNECTED || chan->state == WAN_CONNECTING) - cycx_x25_chan_disconnect(dev); - - return 0; -} - -/* Build media header. - * o encapsulate packet according to encapsulation type. - * - * The trick here is to put packet type (Ethertype) into 'protocol' field of - * the socket buffer, so that we don't forget it. If encapsulation fails, - * set skb->protocol to 0 and discard packet later. - * - * Return: media header length. */ -static int cycx_netdevice_hard_header(struct sk_buff *skb, - struct net_device *dev, u16 type, - const void *daddr, const void *saddr, - unsigned len) -{ - skb->protocol = htons(type); - - return dev->hard_header_len; -} - -/* * Re-build media header. - * Return: 1 physical address resolved. - * 0 physical address not resolved */ -static int cycx_netdevice_rebuild_header(struct sk_buff *skb) -{ - return 1; -} - -/* Send a packet on a network interface. - * o set busy flag (marks start of the transmission). - * o check link state. If link is not up, then drop the packet. - * o check channel status. If it's down then initiate a call. - * o pass a packet to corresponding WAN device. - * o free socket buffer - * - * Return: 0 complete (socket buffer must be freed) - * non-0 packet may be re-transmitted (tbusy must be set) - * - * Notes: - * 1. This routine is called either by the protocol stack or by the "net - * bottom half" (with interrupts enabled). - * 2. Setting tbusy flag will inhibit further transmit requests from the - * protocol stack and can be used for flow control with protocol layer. */ -static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - - if (!chan->svc) - chan->protocol = ntohs(skb->protocol); - - if (card->wandev.state != WAN_CONNECTED) - ++chan->ifstats.tx_dropped; - else if (chan->svc && chan->protocol && - chan->protocol != ntohs(skb->protocol)) { - pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n", - card->devname, ntohs(skb->protocol), dev->name); - ++chan->ifstats.tx_errors; - } else if (chan->protocol == ETH_P_IP) { - switch (chan->state) { - case WAN_DISCONNECTED: - if (cycx_x25_chan_connect(dev)) { - netif_stop_queue(dev); - return NETDEV_TX_BUSY; - } - /* fall thru */ - case WAN_CONNECTED: - reset_timer(dev); - dev->trans_start = jiffies; - netif_stop_queue(dev); - - if (cycx_x25_chan_send(dev, skb)) - return NETDEV_TX_BUSY; - - break; - default: - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - } - } else { /* chan->protocol == ETH_P_X25 */ - switch (skb->data[0]) { - case X25_IFACE_DATA: - break; - case X25_IFACE_CONNECT: - cycx_x25_chan_connect(dev); - goto free_packet; - case X25_IFACE_DISCONNECT: - cycx_x25_chan_disconnect(dev); - goto free_packet; - default: - pr_info("%s: unknown %d x25-iface request on %s!\n", - card->devname, skb->data[0], dev->name); - ++chan->ifstats.tx_errors; - goto free_packet; - } - - skb_pull(skb, 1); /* Remove control byte */ - reset_timer(dev); - dev->trans_start = jiffies; - netif_stop_queue(dev); - - if (cycx_x25_chan_send(dev, skb)) { - /* prepare for future retransmissions */ - skb_push(skb, 1); - return NETDEV_TX_BUSY; - } - } - -free_packet: - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/* Get Ethernet-style interface statistics. - * Return a pointer to struct net_device_stats */ -static struct net_device_stats *cycx_netdevice_get_stats(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - return chan ? &chan->ifstats : NULL; -} - -/* Interrupt Handlers */ -/* X.25 Interrupt Service Routine. */ -static void cycx_x25_irq_handler(struct cycx_device *card) -{ - struct cycx_x25_cmd cmd; - u16 z = 0; - - card->in_isr = 1; - card->buff_int_mode_unbusy = 0; - cycx_peek(&card->hw, X25_RXMBOX_OFFS, &cmd, sizeof(cmd)); - - switch (cmd.command) { - case X25_DATA_INDICATION: - cycx_x25_irq_rx(card, &cmd); - break; - case X25_ACK_FROM_VC: - cycx_x25_irq_tx(card, &cmd); - break; - case X25_LOG: - cycx_x25_irq_log(card, &cmd); - break; - case X25_STATISTIC: - cycx_x25_irq_stat(card, &cmd); - break; - case X25_CONNECT_CONFIRM: - cycx_x25_irq_connect_confirm(card, &cmd); - break; - case X25_CONNECT_INDICATION: - cycx_x25_irq_connect(card, &cmd); - break; - case X25_DISCONNECT_INDICATION: - cycx_x25_irq_disconnect(card, &cmd); - break; - case X25_DISCONNECT_CONFIRM: - cycx_x25_irq_disconnect_confirm(card, &cmd); - break; - case X25_LINE_ON: - cycx_set_state(card, WAN_CONNECTED); - break; - case X25_LINE_OFF: - cycx_set_state(card, WAN_DISCONNECTED); - break; - default: - cycx_x25_irq_spurious(card, &cmd); - break; - } - - cycx_poke(&card->hw, 0, &z, sizeof(z)); - cycx_poke(&card->hw, X25_RXMBOX_OFFS, &z, sizeof(z)); - card->in_isr = 0; -} - -/* Transmit interrupt handler. - * o Release socket buffer - * o Clear 'tbusy' flag */ -static void cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ - struct net_device *dev; - struct wan_device *wandev = &card->wandev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - - /* unbusy device and then dev_tint(); */ - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (dev) { - card->buff_int_mode_unbusy = 1; - netif_wake_queue(dev); - } else - pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn); -} - -/* Receive interrupt handler. - * This routine handles fragmented IP packets using M-bit according to the - * RFC1356. - * o map logical channel number to network interface. - * o allocate socket buffer or append received packet to the existing one. - * o if M-bit is reset (i.e. it's the last packet in a sequence) then - * decapsulate packet and pass socket buffer to the protocol stack. - * - * Notes: - * 1. When allocating a socket buffer, if M-bit is set then more data is - * coming and we have to allocate buffer for the maximum IP packet size - * expected on this channel. - * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no - * socket buffers available) the whole packet sequence must be discarded. */ -static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - struct cycx_x25_channel *chan; - struct sk_buff *skb; - u8 bitm, lcn; - int pktlen = cmd->len - 5; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 4, &bitm, sizeof(bitm)); - bitm &= 0x10; - - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s: receiving on orphaned LCN %d!\n", - card->devname, lcn); - return; - } - - chan = netdev_priv(dev); - reset_timer(dev); - - if (chan->drop_sequence) { - if (!bitm) - chan->drop_sequence = 0; - else - return; - } - - if ((skb = chan->rx_skb) == NULL) { - /* Allocate new socket buffer */ - int bufsize = bitm ? dev->mtu : pktlen; - - if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) + - bufsize + - dev->hard_header_len)) == NULL) { - pr_info("%s: no socket buffers available!\n", - card->devname); - chan->drop_sequence = 1; - ++chan->ifstats.rx_dropped; - return; - } - - if (chan->protocol == ETH_P_X25) /* X.25 socket layer control */ - /* 0 = data packet (dev_alloc_skb zeroed skb->data) */ - skb_put(skb, 1); - - skb->dev = dev; - skb->protocol = htons(chan->protocol); - chan->rx_skb = skb; - } - - if (skb_tailroom(skb) < pktlen) { - /* No room for the packet. Call off the whole thing! */ - dev_kfree_skb_irq(skb); - chan->rx_skb = NULL; - - if (bitm) - chan->drop_sequence = 1; - - pr_info("%s: unexpectedly long packet sequence on interface %s!\n", - card->devname, dev->name); - ++chan->ifstats.rx_length_errors; - return; - } - - /* Append packet to the socket buffer */ - cycx_peek(&card->hw, cmd->buf + 5, skb_put(skb, pktlen), pktlen); - - if (bitm) - return; /* more data is coming */ - - chan->rx_skb = NULL; /* dequeue packet */ - - ++chan->ifstats.rx_packets; - chan->ifstats.rx_bytes += pktlen; - - skb_reset_mac_header(skb); - netif_rx(skb); -} - -/* Connect interrupt handler. */ -static void cycx_x25_irq_connect(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev = NULL; - struct cycx_x25_channel *chan; - u8 d[32], - loc[24], - rem[24]; - u8 lcn, sizeloc, sizerem; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 5, &sizeloc, sizeof(sizeloc)); - cycx_peek(&card->hw, cmd->buf + 6, d, cmd->len - 6); - - sizerem = sizeloc >> 4; - sizeloc &= 0x0F; - - loc[0] = rem[0] = '\0'; - - if (sizeloc) - nibble_to_byte(d, loc, sizeloc, 0); - - if (sizerem) - nibble_to_byte(d + (sizeloc >> 1), rem, sizerem, sizeloc & 1); - - dprintk(1, KERN_INFO "%s:lcn=%d, local=%s, remote=%s\n", - __func__, lcn, loc, rem); - - dev = cycx_x25_get_dev_by_dte_addr(wandev, rem); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s: connect not expected: remote %s!\n", - card->devname, rem); - return; - } - - chan = netdev_priv(dev); - chan->lcn = lcn; - cycx_x25_connect_response(card, chan); - cycx_x25_set_chan_state(dev, WAN_CONNECTED); -} - -/* Connect confirm interrupt handler. */ -static void cycx_x25_irq_connect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - struct cycx_x25_channel *chan; - u8 lcn, key; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 1, &key, sizeof(key)); - dprintk(1, KERN_INFO "%s: %s:lcn=%d, key=%d\n", - card->devname, __func__, lcn, key); - - dev = cycx_x25_get_dev_by_lcn(wandev, -key); - if (!dev) { - /* Invalid channel, discard packet */ - clear_bit(--key, (void*)&card->u.x.connection_keys); - pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n", - card->devname, lcn, key); - return; - } - - clear_bit(--key, (void*)&card->u.x.connection_keys); - chan = netdev_priv(dev); - chan->lcn = lcn; - cycx_x25_set_chan_state(dev, WAN_CONNECTED); -} - -/* Disconnect confirm interrupt handler. */ -static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - dprintk(1, KERN_INFO "%s: %s:lcn=%d\n", - card->devname, __func__, lcn); - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s:disconnect confirm not expected!:lcn %d\n", - card->devname, lcn); - return; - } - - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); -} - -/* disconnect interrupt handler. */ -static void cycx_x25_irq_disconnect(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - dprintk(1, KERN_INFO "%s:lcn=%d\n", __func__, lcn); - - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (dev) { - struct cycx_x25_channel *chan = netdev_priv(dev); - - cycx_x25_disconnect_response(card, chan->link, lcn); - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); - } else - cycx_x25_disconnect_response(card, 0, lcn); -} - -/* LOG interrupt handler. */ -static void cycx_x25_irq_log(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ -#if CYCLOMX_X25_DEBUG - char bf[20]; - u16 size, toread, link, msg_code; - u8 code, routine; - - cycx_peek(&card->hw, cmd->buf, &msg_code, sizeof(msg_code)); - cycx_peek(&card->hw, cmd->buf + 2, &link, sizeof(link)); - cycx_peek(&card->hw, cmd->buf + 4, &size, sizeof(size)); - /* at most 20 bytes are available... thanks to Daniela :) */ - toread = size < 20 ? size : 20; - cycx_peek(&card->hw, cmd->buf + 10, &bf, toread); - cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1); - cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1); - - pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n"); - pr_info("cmd->buf=0x%X\n", cmd->buf); - pr_info("Log message code=0x%X\n", msg_code); - pr_info("Link=%d\n", link); - pr_info("log code=0x%X\n", code); - pr_info("log routine=0x%X\n", routine); - pr_info("Message size=%d\n", size); - hex_dump("Message", bf, toread); -#endif -} - -/* STATISTIC interrupt handler. */ -static void cycx_x25_irq_stat(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - cycx_peek(&card->hw, cmd->buf, &card->u.x.stats, - sizeof(card->u.x.stats)); - hex_dump("cycx_x25_irq_stat", (unsigned char*)&card->u.x.stats, - sizeof(card->u.x.stats)); - cycx_x25_dump_stats(&card->u.x.stats); - wake_up_interruptible(&card->wait_stats); -} - -/* Spurious interrupt handler. - * o print a warning - * If number of spurious interrupts exceeded some limit, then ??? */ -static void cycx_x25_irq_spurious(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - pr_info("%s: spurious interrupt (0x%X)!\n", - card->devname, cmd->command); -} -#ifdef CYCLOMX_X25_DEBUG -static void hex_dump(char *msg, unsigned char *p, int len) -{ - print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1, - p, len, true); -} -#endif - -/* Cyclom 2X Firmware-Specific Functions */ -/* Exec X.25 command. */ -static int x25_exec(struct cycx_device *card, int command, int link, - void *d1, int len1, void *d2, int len2) -{ - struct cycx_x25_cmd c; - unsigned long flags; - u32 addr = 0x1200 + 0x2E0 * link + 0x1E2; - u8 retry = CYCX_X25_MAX_CMD_RETRY; - int err = 0; - - c.command = command; - c.link = link; - c.len = len1 + len2; - - spin_lock_irqsave(&card->u.x.lock, flags); - - /* write command */ - cycx_poke(&card->hw, X25_MBOX_OFFS, &c, sizeof(c) - sizeof(c.buf)); - - /* write X.25 data */ - if (d1) { - cycx_poke(&card->hw, addr, d1, len1); - - if (d2) { - if (len2 > 254) { - u32 addr1 = 0xA00 + 0x400 * link; - - cycx_poke(&card->hw, addr + len1, d2, 249); - cycx_poke(&card->hw, addr1, ((u8*)d2) + 249, - len2 - 249); - } else - cycx_poke(&card->hw, addr + len1, d2, len2); - } - } - - /* generate interruption, executing command */ - cycx_intr(&card->hw); - - /* wait till card->mbox == 0 */ - do { - err = cycx_exec(card->mbox); - } while (retry-- && err); - - spin_unlock_irqrestore(&card->u.x.lock, flags); - - return err; -} - -/* Configure adapter. */ -static int cycx_x25_configure(struct cycx_device *card, - struct cycx_x25_config *conf) -{ - struct { - u16 nlinks; - struct cycx_x25_config conf[2]; - } x25_cmd_conf; - - memset(&x25_cmd_conf, 0, sizeof(x25_cmd_conf)); - x25_cmd_conf.nlinks = 2; - x25_cmd_conf.conf[0] = *conf; - /* FIXME: we need to find a way in the wanrouter framework - to configure the second link, for now lets use it - with the same config from the first link, fixing - the interface type to RS232, the speed in 38400 and - the clock to external */ - x25_cmd_conf.conf[1] = *conf; - x25_cmd_conf.conf[1].link = 1; - x25_cmd_conf.conf[1].speed = 5; /* 38400 */ - x25_cmd_conf.conf[1].clock = 8; - x25_cmd_conf.conf[1].flags = 0; /* default = RS232 */ - - cycx_x25_dump_config(&x25_cmd_conf.conf[0]); - cycx_x25_dump_config(&x25_cmd_conf.conf[1]); - - return x25_exec(card, X25_CONFIG, 0, - &x25_cmd_conf, sizeof(x25_cmd_conf), NULL, 0); -} - -/* Get protocol statistics. */ -static int cycx_x25_get_stats(struct cycx_device *card) -{ - /* the firmware expects 20 in the size field!!! - thanks to Daniela */ - int err = x25_exec(card, X25_STATISTIC, 0, NULL, 20, NULL, 0); - - if (err) - return err; - - interruptible_sleep_on(&card->wait_stats); - - if (signal_pending(current)) - return -EINTR; - - card->wandev.stats.rx_packets = card->u.x.stats.n2_rx_frames; - card->wandev.stats.rx_over_errors = card->u.x.stats.rx_over_errors; - card->wandev.stats.rx_crc_errors = card->u.x.stats.rx_crc_errors; - card->wandev.stats.rx_length_errors = 0; /* not available from fw */ - card->wandev.stats.rx_frame_errors = 0; /* not available from fw */ - card->wandev.stats.rx_missed_errors = card->u.x.stats.rx_aborts; - card->wandev.stats.rx_dropped = 0; /* not available from fw */ - card->wandev.stats.rx_errors = 0; /* not available from fw */ - card->wandev.stats.tx_packets = card->u.x.stats.n2_tx_frames; - card->wandev.stats.tx_aborted_errors = card->u.x.stats.tx_aborts; - card->wandev.stats.tx_dropped = 0; /* not available from fw */ - card->wandev.stats.collisions = 0; /* not available from fw */ - card->wandev.stats.tx_errors = 0; /* not available from fw */ - - cycx_x25_dump_devs(&card->wandev); - - return 0; -} - -/* return the number of nibbles */ -static int byte_to_nibble(u8 *s, u8 *d, char *nibble) -{ - int i = 0; - - if (*nibble && *s) { - d[i] |= *s++ - '0'; - *nibble = 0; - ++i; - } - - while (*s) { - d[i] = (*s - '0') << 4; - if (*(s + 1)) - d[i] |= *(s + 1) - '0'; - else { - *nibble = 1; - break; - } - ++i; - s += 2; - } - - return i; -} - -static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble) -{ - if (nibble) { - *d++ = '0' + (*s++ & 0x0F); - --len; - } - - while (len) { - *d++ = '0' + (*s >> 4); - - if (--len) { - *d++ = '0' + (*s & 0x0F); - --len; - } else break; - - ++s; - } - - *d = '\0'; -} - -/* Place X.25 call. */ -static int x25_place_call(struct cycx_device *card, - struct cycx_x25_channel *chan) -{ - int err = 0, - len; - char d[64], - nibble = 0, - mylen = chan->local_addr ? strlen(chan->local_addr) : 0, - remotelen = strlen(chan->addr); - u8 key; - - if (card->u.x.connection_keys == ~0U) { - pr_info("%s: too many simultaneous connection requests!\n", - card->devname); - return -EAGAIN; - } - - key = ffz(card->u.x.connection_keys); - set_bit(key, (void*)&card->u.x.connection_keys); - ++key; - dprintk(1, KERN_INFO "%s:x25_place_call:key=%d\n", card->devname, key); - memset(d, 0, sizeof(d)); - d[1] = key; /* user key */ - d[2] = 0x10; - d[4] = 0x0B; - - len = byte_to_nibble(chan->addr, d + 6, &nibble); - - if (chan->local_addr) - len += byte_to_nibble(chan->local_addr, d + 6 + len, &nibble); - - if (nibble) - ++len; - - d[5] = mylen << 4 | remotelen; - d[6 + len + 1] = 0xCC; /* TCP/IP over X.25, thanks to Daniela :) */ - - if ((err = x25_exec(card, X25_CONNECT_REQUEST, chan->link, - &d, 7 + len + 1, NULL, 0)) != 0) - clear_bit(--key, (void*)&card->u.x.connection_keys); - else - chan->lcn = -key; - - return err; -} - -/* Place X.25 CONNECT RESPONSE. */ -static int cycx_x25_connect_response(struct cycx_device *card, - struct cycx_x25_channel *chan) -{ - u8 d[8]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = chan->lcn; - d[2] = 0x10; - d[4] = 0x0F; - d[7] = 0xCC; /* TCP/IP over X.25, thanks Daniela */ - - return x25_exec(card, X25_CONNECT_RESPONSE, chan->link, &d, 8, NULL, 0); -} - -/* Place X.25 DISCONNECT RESPONSE. */ -static int cycx_x25_disconnect_response(struct cycx_device *card, u8 link, - u8 lcn) -{ - char d[5]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = lcn; - d[2] = 0x10; - d[4] = 0x17; - - return x25_exec(card, X25_DISCONNECT_RESPONSE, link, &d, 5, NULL, 0); -} - -/* Clear X.25 call. */ -static int x25_clear_call(struct cycx_device *card, u8 link, u8 lcn, u8 cause, - u8 diagn) -{ - u8 d[7]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = lcn; - d[2] = 0x10; - d[4] = 0x13; - d[5] = cause; - d[6] = diagn; - - return x25_exec(card, X25_DISCONNECT_REQUEST, link, d, 7, NULL, 0); -} - -/* Send X.25 data packet. */ -static int cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm, - int len, void *buf) -{ - u8 d[] = "?\xFF\x10??"; - - d[0] = d[3] = lcn; - d[4] = bitm; - - return x25_exec(card, X25_DATA_REQUEST, link, &d, 5, buf, len); -} - -/* Miscellaneous */ -/* Find network device by its channel number. */ -static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev, - s16 lcn) -{ - struct net_device *dev = wandev->dev; - struct cycx_x25_channel *chan; - - while (dev) { - chan = netdev_priv(dev); - - if (chan->lcn == lcn) - break; - dev = chan->slave; - } - return dev; -} - -/* Find network device by its remote dte address. */ -static struct net_device * - cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte) -{ - struct net_device *dev = wandev->dev; - struct cycx_x25_channel *chan; - - while (dev) { - chan = netdev_priv(dev); - - if (!strcmp(chan->addr, dte)) - break; - dev = chan->slave; - } - return dev; -} - -/* Initiate connection on the logical channel. - * o for PVC we just get channel configuration - * o for SVCs place an X.25 call - * - * Return: 0 connected - * >0 connection in progress - * <0 failure */ -static int cycx_x25_chan_connect(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - - if (chan->svc) { - if (!chan->addr[0]) - return -EINVAL; /* no destination address */ - - dprintk(1, KERN_INFO "%s: placing X.25 call to %s...\n", - card->devname, chan->addr); - - if (x25_place_call(card, chan)) - return -EIO; - - cycx_x25_set_chan_state(dev, WAN_CONNECTING); - return 1; - } else - cycx_x25_set_chan_state(dev, WAN_CONNECTED); - - return 0; -} - -/* Disconnect logical channel. - * o if SVC then clear X.25 call */ -static void cycx_x25_chan_disconnect(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) { - x25_clear_call(chan->card, chan->link, chan->lcn, 0, 0); - cycx_x25_set_chan_state(dev, WAN_DISCONNECTING); - } else - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); -} - -/* Called by kernel timer */ -static void cycx_x25_chan_timer(unsigned long d) -{ - struct net_device *dev = (struct net_device *)d; - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->state == WAN_CONNECTED) - cycx_x25_chan_disconnect(dev); - else - pr_err("%s: %s for svc (%s) not connected!\n", - chan->card->devname, __func__, dev->name); -} - -/* Set logical channel state. */ -static void cycx_x25_set_chan_state(struct net_device *dev, u8 state) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (chan->state != state) { - if (chan->svc && chan->state == WAN_CONNECTED) - del_timer(&chan->timer); - - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - *(__be16*)dev->dev_addr = htons(chan->lcn); - netif_wake_queue(dev); - reset_timer(dev); - - if (chan->protocol == ETH_P_X25) - cycx_x25_chan_send_event(dev, - X25_IFACE_CONNECT); - - break; - case WAN_CONNECTING: - string_state = "connecting..."; - break; - case WAN_DISCONNECTING: - string_state = "disconnecting..."; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - - if (chan->svc) { - *(unsigned short*)dev->dev_addr = 0; - chan->lcn = 0; - } - - if (chan->protocol == ETH_P_X25) - cycx_x25_chan_send_event(dev, - X25_IFACE_DISCONNECT); - - netif_wake_queue(dev); - break; - } - - pr_info("%s: interface %s %s\n", - card->devname, dev->name, string_state); - chan->state = state; - } - - spin_unlock_irqrestore(&card->lock, flags); -} - -/* Send packet on a logical channel. - * When this function is called, tx_skb field of the channel data space - * points to the transmit socket buffer. When transmission is complete, - * release socket buffer and reset 'tbusy' flag. - * - * Return: 0 - transmission complete - * 1 - busy - * - * Notes: - * 1. If packet length is greater than MTU for this channel, we'll fragment - * the packet into 'complete sequence' using M-bit. - * 2. When transmission is complete, an event notification should be issued - * to the router. */ -static int cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - int bitm = 0; /* final packet */ - unsigned len = skb->len; - - if (skb->len > card->wandev.mtu) { - len = card->wandev.mtu; - bitm = 0x10; /* set M-bit (more data) */ - } - - if (cycx_x25_send(card, chan->link, chan->lcn, bitm, len, skb->data)) - return 1; - - if (bitm) { - skb_pull(skb, len); - return 1; - } - - ++chan->ifstats.tx_packets; - chan->ifstats.tx_bytes += len; - - return 0; -} - -/* Send event (connection, disconnection, etc) to X.25 socket layer */ - -static void cycx_x25_chan_send_event(struct net_device *dev, u8 event) -{ - struct sk_buff *skb; - unsigned char *ptr; - - if ((skb = dev_alloc_skb(1)) == NULL) { - pr_err("%s: out of memory\n", __func__); - return; - } - - ptr = skb_put(skb, 1); - *ptr = event; - - skb->protocol = x25_type_trans(skb, dev); - netif_rx(skb); -} - -/* Convert line speed in bps to a number used by cyclom 2x code. */ -static u8 bps_to_speed_code(u32 bps) -{ - u8 number = 0; /* defaults to the lowest (1200) speed ;> */ - - if (bps >= 512000) number = 8; - else if (bps >= 256000) number = 7; - else if (bps >= 64000) number = 6; - else if (bps >= 38400) number = 5; - else if (bps >= 19200) number = 4; - else if (bps >= 9600) number = 3; - else if (bps >= 4800) number = 2; - else if (bps >= 2400) number = 1; - - return number; -} - -/* log base 2 */ -static u8 cycx_log2(u32 n) -{ - u8 log = 0; - - if (!n) - return 0; - - while (n > 1) { - n >>= 1; - ++log; - } - - return log; -} - -/* Convert decimal string to unsigned integer. - * If len != 0 then only 'len' characters of the string are converted. */ -static unsigned dec_to_uint(u8 *str, int len) -{ - unsigned val = 0; - - if (!len) - len = strlen(str); - - for (; len && isdigit(*str); ++str, --len) - val = (val * 10) + (*str - (unsigned) '0'); - - return val; -} - -static void reset_timer(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) - mod_timer(&chan->timer, jiffies+chan->idle_tmout*HZ); -} -#ifdef CYCLOMX_X25_DEBUG -static void cycx_x25_dump_config(struct cycx_x25_config *conf) -{ - pr_info("X.25 configuration\n"); - pr_info("-----------------\n"); - pr_info("link number=%d\n", conf->link); - pr_info("line speed=%d\n", conf->speed); - pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In"); - pr_info("# level 2 retransm.=%d\n", conf->n2); - pr_info("level 2 window=%d\n", conf->n2win); - pr_info("level 3 window=%d\n", conf->n3win); - pr_info("# logical channels=%d\n", conf->nvc); - pr_info("level 3 pkt len=%d\n", conf->pktlen); - pr_info("my address=%d\n", conf->locaddr); - pr_info("remote address=%d\n", conf->remaddr); - pr_info("t1=%d seconds\n", conf->t1); - pr_info("t2=%d seconds\n", conf->t2); - pr_info("t21=%d seconds\n", conf->t21); - pr_info("# PVCs=%d\n", conf->npvc); - pr_info("t23=%d seconds\n", conf->t23); - pr_info("flags=0x%x\n", conf->flags); -} - -static void cycx_x25_dump_stats(struct cycx_x25_stats *stats) -{ - pr_info("X.25 statistics\n"); - pr_info("--------------\n"); - pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors); - pr_info("rx_over_errors=%d\n", stats->rx_over_errors); - pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames); - pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames); - pr_info("tx_timeouts=%d\n", stats->tx_timeouts); - pr_info("rx_timeouts=%d\n", stats->rx_timeouts); - pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets); - pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets); - pr_info("tx_aborts=%d\n", stats->tx_aborts); - pr_info("rx_aborts=%d\n", stats->rx_aborts); -} - -static void cycx_x25_dump_devs(struct wan_device *wandev) -{ - struct net_device *dev = wandev->dev; - - pr_info("X.25 dev states\n"); - pr_info("name: addr: txoff: protocol:\n"); - pr_info("---------------------------------------\n"); - - while(dev) { - struct cycx_x25_channel *chan = netdev_priv(dev); - - pr_info("%-5.5s %-15.15s %d ETH_P_%s\n", - chan->name, chan->addr, netif_queue_stopped(dev), - chan->protocol == ETH_P_IP ? "IP" : "X25"); - dev = chan->slave; - } -} - -#endif /* CYCLOMX_X25_DEBUG */ -/* End */ diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h deleted file mode 100644 index b88f7f4..0000000 --- a/include/linux/cyclomx.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _CYCLOMX_H -#define _CYCLOMX_H -/* -* cyclomx.h Cyclom 2X WAN Link Driver. -* User-level API definitions. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on wanpipe.h by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 2000/07/13 acme remove crap #if KERNEL_VERSION > blah -* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count -* and cyclomx_close to cyclomx_mod_dec_use_count -* 1999/05/19 acme wait_queue_head_t wait_stats(support for 2.3.*) -* 1999/01/03 acme judicious use of data types -* 1998/12/27 acme cleanup: PACKED not needed -* 1998/08/08 acme Version 0.0.1 -*/ - -#include -#include - -#ifdef __KERNEL__ -/* Kernel Interface */ - -#include /* Cyclom 2X support module API definitions */ -#include /* Cyclom 2X firmware module definitions */ -#ifdef CONFIG_CYCLOMX_X25 -#include -#endif - -/* Adapter Data Space. - * This structure is needed because we handle multiple cards, otherwise - * static data would do it. - */ -struct cycx_device { - char devname[WAN_DRVNAME_SZ + 1];/* card name */ - struct cycx_hw hw; /* hardware configuration */ - struct wan_device wandev; /* WAN device data space */ - u32 state_tick; /* link state timestamp */ - spinlock_t lock; - char in_isr; /* interrupt-in-service flag */ - char buff_int_mode_unbusy; /* flag for carrying out dev_tint */ - wait_queue_head_t wait_stats; /* to wait for the STATS indication */ - void __iomem *mbox; /* -> mailbox */ - void (*isr)(struct cycx_device* card); /* interrupt service routine */ - int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data); - union { -#ifdef CONFIG_CYCLOMX_X25 - struct { /* X.25 specific data */ - u32 lo_pvc; - u32 hi_pvc; - u32 lo_svc; - u32 hi_svc; - struct cycx_x25_stats stats; - spinlock_t lock; - u32 connection_keys; - } x; -#endif - } u; -}; - -/* Public Functions */ -void cycx_set_state(struct cycx_device *card, int state); - -#ifdef CONFIG_CYCLOMX_X25 -int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf); -#endif -#endif /* __KERNEL__ */ -#endif /* _CYCLOMX_H */ diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h deleted file mode 100644 index 12fe6b0..0000000 --- a/include/linux/cycx_drv.h +++ /dev/null @@ -1,64 +0,0 @@ -/* -* cycx_drv.h CYCX Support Module. Kernel API Definitions. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdladrv.h by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1999/10/23 acme cycxhw_t cleanup -* 1999/01/03 acme more judicious use of data types... -* uclong, ucchar, etc deleted, the u8, u16, u32 -* types are the portable way to go. -* 1999/01/03 acme judicious use of data types... u16, u32, etc -* 1998/12/26 acme FIXED_BUFFERS, CONF_OFFSET, -* removal of cy_read{bwl} -* 1998/08/08 acme Initial version. -*/ -#ifndef _CYCX_DRV_H -#define _CYCX_DRV_H - -#define CYCX_WINDOWSIZE 0x4000 /* default dual-port memory window size */ -#define GEN_CYCX_INTR 0x02 -#define RST_ENABLE 0x04 -#define START_CPU 0x06 -#define RST_DISABLE 0x08 -#define FIXED_BUFFERS 0x08 -#define TEST_PATTERN 0xaa55 -#define CMD_OFFSET 0x20 -#define CONF_OFFSET 0x0380 -#define RESET_OFFSET 0x3c00 /* For reset file load */ -#define DATA_OFFSET 0x0100 /* For code and data files load */ -#define START_OFFSET 0x3ff0 /* 80186 starts here */ - -/** - * struct cycx_hw - Adapter hardware configuration - * @fwid - firmware ID - * @irq - interrupt request level - * @dpmbase - dual-port memory base - * @dpmsize - dual-port memory size - * @reserved - reserved for future use - */ -struct cycx_hw { - u32 fwid; - int irq; - void __iomem *dpmbase; - u32 dpmsize; - u32 reserved[5]; -}; - -/* Function Prototypes */ -extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base); -extern int cycx_down(struct cycx_hw *hw); -extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len); -extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len); -extern int cycx_exec(void __iomem *addr); - -extern void cycx_intr(struct cycx_hw *hw); -#endif /* _CYCX_DRV_H */ diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index cec4b41..8198a63 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -1,129 +1,10 @@ -/***************************************************************************** -* wanrouter.h Definitions for the WAN Multiprotocol Router Module. -* This module provides API and common services for WAN Link -* Drivers and is completely hardware-independent. -* -* Author: Nenad Corbic -* Gideon Hack -* Additions: Arnaldo Melo -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State -* Feb 24, 2000 Nenad Corbic Added support for socket based x25api -* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. -* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t -* WAN_DISCONNECTING state added -* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' -* Jun 12, 1998 David Fong Added Cisco HDLC support. -* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to -* 'wanif_conf_t' -* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' -* Added 'authenticator' to 'wan_ppp_conf_t' -* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 -* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' -* Added 'enable_IPX' and 'network_number' to -* 'wan_device_t'. Also added defines for -* UDP PACKET TYPE, Interrupt test, critical values -* for RACE conditions. -* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to -* 'wan_fr_conf_t' to configure a list of dlci(s) -* for a NODE -* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' -* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' -* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' -* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). -*****************************************************************************/ +/* + * wanrouter.h Legacy declarations kept around until X25 is removed + */ + #ifndef _ROUTER_H #define _ROUTER_H #include -/****** Kernel Interface ****************************************************/ - -#include /* support for device drivers */ -#include /* proc filesystem pragmatics */ -#include /* support for network drivers */ -#include /* Support for SMP Locking */ - -/*---------------------------------------------------------------------------- - * WAN device data space. - */ -struct wan_device { - unsigned magic; /* magic number */ - char* name; /* -> WAN device name (ASCIIZ) */ - void* private; /* -> driver private data */ - unsigned config_id; /* Configuration ID */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base #1 */ - char S514_cpu_no[1]; /* PCI CPU Number */ - unsigned char S514_slot_no; /* PCI Slot Number */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* max physical transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned enable_tx_int; /* Transmit Interrupt enabled or not */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char signalling; /* Signalling RS232 or V35 */ - char read_mode; /* read mode: Polling or interrupt */ - char new_if_cnt; /* Number of interfaces per wanpipe */ - char del_if_cnt; /* Number of times del_if() gets called */ - unsigned char piggyback; /* Piggibacking a port */ - unsigned hw_opt[4]; /* other hardware options */ - /****** status and statistics *******/ - char state; /* device state */ - char api_status; /* device api status */ - struct net_device_stats stats; /* interface statistics */ - unsigned reserved[16]; /* reserved for future use */ - unsigned long critical; /* critical section flag */ - spinlock_t lock; /* Support for SMP Locking */ - - /****** device management methods ***/ - int (*setup) (struct wan_device *wandev, wandev_conf_t *conf); - int (*shutdown) (struct wan_device *wandev); - int (*update) (struct wan_device *wandev); - int (*ioctl) (struct wan_device *wandev, unsigned cmd, - unsigned long arg); - int (*new_if)(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf); - int (*del_if)(struct wan_device *wandev, struct net_device *dev); - /****** maintained by the router ****/ - struct wan_device* next; /* -> next device */ - struct net_device* dev; /* list of network interfaces */ - unsigned ndev; /* number of interfaces */ - struct proc_dir_entry *dent; /* proc filesystem entry */ -}; - -/* Public functions available for device drivers */ -extern int register_wan_device(struct wan_device *wandev); -extern int unregister_wan_device(char *name); - -/* Proc interface functions. These must not be called by the drivers! */ -extern int wanrouter_proc_init(void); -extern void wanrouter_proc_cleanup(void); -extern int wanrouter_proc_add(struct wan_device *wandev); -extern int wanrouter_proc_delete(struct wan_device *wandev); -extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg); - -/* Public Data */ -/* list of registered devices */ -extern struct wan_device *wanrouter_router_devlist; - #endif /* _ROUTER_H */ diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h index 7617df2..498d6c1 100644 --- a/include/uapi/linux/wanrouter.h +++ b/include/uapi/linux/wanrouter.h @@ -1,363 +1,9 @@ -/***************************************************************************** -* wanrouter.h Definitions for the WAN Multiprotocol Router Module. -* This module provides API and common services for WAN Link -* Drivers and is completely hardware-independent. -* -* Author: Nenad Corbic -* Gideon Hack -* Additions: Arnaldo Melo -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State -* Feb 24, 2000 Nenad Corbic Added support for socket based x25api -* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. -* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t -* WAN_DISCONNECTING state added -* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' -* Jun 12, 1998 David Fong Added Cisco HDLC support. -* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to -* 'wanif_conf_t' -* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' -* Added 'authenticator' to 'wan_ppp_conf_t' -* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 -* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' -* Added 'enable_IPX' and 'network_number' to -* 'wan_device_t'. Also added defines for -* UDP PACKET TYPE, Interrupt test, critical values -* for RACE conditions. -* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to -* 'wan_fr_conf_t' to configure a list of dlci(s) -* for a NODE -* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' -* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' -* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' -* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). -*****************************************************************************/ - -#ifndef _UAPI_ROUTER_H -#define _UAPI_ROUTER_H - -#define ROUTER_NAME "wanrouter" /* in case we ever change it */ -#define ROUTER_VERSION 1 /* version number */ -#define ROUTER_RELEASE 1 /* release (minor version) number */ -#define ROUTER_IOCTL 'W' /* for IOCTL calls */ -#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ - -/* IOCTL codes for /proc/router/ entries (up to 255) */ -enum router_ioctls -{ - ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ - ROUTER_DOWN, /* shut down device */ - ROUTER_STAT, /* get device status */ - ROUTER_IFNEW, /* add interface */ - ROUTER_IFDEL, /* delete interface */ - ROUTER_IFSTAT, /* get interface status */ - ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ - ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 -}; - -/* identifiers for displaying proc file data for dual port adapters */ -#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ -#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ - -/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ -#define NLPID_IP 0xCC /* Internet Protocol Datagram */ -#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ -#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ -#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ -#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ -#define NLPID_Q933 0x08 /* CCITT Q.933 */ - -/* Miscellaneous */ -#define WAN_IFNAME_SZ 15 /* max length of the interface name */ -#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ -#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ -#define USED_BY_FIELD 8 /* max length of the used by field */ - -/* Defines for UDP PACKET TYPE */ -#define UDP_PTPIPE_TYPE 0x01 -#define UDP_FPIPE_TYPE 0x02 -#define UDP_CPIPE_TYPE 0x03 -#define UDP_DRVSTATS_TYPE 0x04 -#define UDP_INVALID_TYPE 0x05 - -/* Command return code */ -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ - -/* UDP Packet Management */ -#define UDP_PKT_FRM_STACK 0x00 -#define UDP_PKT_FRM_NETWORK 0x01 - -/* Maximum interrupt test counter */ -#define MAX_INTR_TEST_COUNTER 100 - -/* Critical Values for RACE conditions*/ -#define CRITICAL_IN_ISR 0xA1 -#define CRITICAL_INTR_HANDLED 0xB1 - -/****** Data Types **********************************************************/ - -/*---------------------------------------------------------------------------- - * X.25-specific link-level configuration. - */ -typedef struct wan_x25_conf -{ - unsigned lo_pvc; /* lowest permanent circuit number */ - unsigned hi_pvc; /* highest permanent circuit number */ - unsigned lo_svc; /* lowest switched circuit number */ - unsigned hi_svc; /* highest switched circuit number */ - unsigned hdlc_window; /* HDLC window size (1..7) */ - unsigned pkt_window; /* X.25 packet window size (1..7) */ - unsigned t1; /* HDLC timer T1, sec (1..30) */ - unsigned t2; /* HDLC timer T2, sec (0..29) */ - unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ - unsigned n2; /* HDLC retransmission limit (1..30) */ - unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ - unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ - unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ - unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ - unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ - unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ - unsigned r10_r20; /* RESTART retransmission limit (0..250) */ - unsigned r12_r22; /* RESET retransmission limit (0..250) */ - unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ - unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ - unsigned x25_conf_opt; /* User defined x25 config optoins */ - unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ - unsigned char logging; /* Control connection logging */ - unsigned char oob_on_modem; /* Whether to send modem status to the user app */ -} wan_x25_conf_t; - -/*---------------------------------------------------------------------------- - * Frame relay specific link-level configuration. - */ -typedef struct wan_fr_conf -{ - unsigned signalling; /* local in-channel signalling type */ - unsigned t391; /* link integrity verification timer */ - unsigned t392; /* polling verification timer */ - unsigned n391; /* full status polling cycle counter */ - unsigned n392; /* error threshold counter */ - unsigned n393; /* monitored events counter */ - unsigned dlci_num; /* number of DLCs (access node) */ - unsigned dlci[100]; /* List of all DLCIs */ -} wan_fr_conf_t; - -/*---------------------------------------------------------------------------- - * PPP-specific link-level configuration. - */ -typedef struct wan_ppp_conf -{ - unsigned restart_tmr; /* restart timer */ - unsigned auth_rsrt_tmr; /* authentication timer */ - unsigned auth_wait_tmr; /* authentication timer */ - unsigned mdm_fail_tmr; /* modem failure timer */ - unsigned dtr_drop_tmr; /* DTR drop timer */ - unsigned connect_tmout; /* connection timeout */ - unsigned conf_retry; /* max. retry */ - unsigned term_retry; /* max. retry */ - unsigned fail_retry; /* max. retry */ - unsigned auth_retry; /* max. retry */ - unsigned auth_options; /* authentication opt. */ - unsigned ip_options; /* IP options */ - char authenticator; /* AUTHENTICATOR or not */ - char ip_mode; /* Static/Host/Peer */ -} wan_ppp_conf_t; - -/*---------------------------------------------------------------------------- - * CHDLC-specific link-level configuration. - */ -typedef struct wan_chdlc_conf -{ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ - unsigned char receive_only; /* no transmit buffering (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ -} wan_chdlc_conf_t; - - -/*---------------------------------------------------------------------------- - * WAN device configuration. Passed to ROUTER_SETUP IOCTL. - */ -typedef struct wandev_conf -{ - unsigned magic; /* magic number (for verification) */ - unsigned config_id; /* configuration structure identifier */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ - unsigned PCI_slot_no; /* S514 PCI adapter slot number */ - char auto_pci_cfg; /* S515 PCI automatic slot detection */ - char comm_port; /* Communication Port (PRI=0, SEC=1) */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned char ft1; /* FT1 Configurator Option */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char read_mode; /* read mode: Polling or interrupt */ - char receive_only; /* disable tx buffers */ - char tty; /* Create a fake tty device */ - unsigned tty_major; /* Major number for wanpipe tty device */ - unsigned tty_minor; /* Minor number for wanpipe tty device */ - unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ - char backup; /* Backup Mode */ - unsigned hw_opt[4]; /* other hardware options */ - unsigned reserved[4]; - /****** arbitrary data ***************/ - unsigned data_size; /* data buffer size */ - void* data; /* data buffer, e.g. firmware */ - union /****** protocol-specific ************/ - { - wan_x25_conf_t x25; /* X.25 configuration */ - wan_ppp_conf_t ppp; /* PPP configuration */ - wan_fr_conf_t fr; /* frame relay configuration */ - wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ - } u; -} wandev_conf_t; - -/* 'config_id' definitions */ -#define WANCONFIG_X25 101 /* X.25 link */ -#define WANCONFIG_FR 102 /* frame relay link */ -#define WANCONFIG_PPP 103 /* synchronous PPP link */ -#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ -#define WANCONFIG_BSC 105 /* BiSync Streaming */ -#define WANCONFIG_HDLC 106 /* HDLC Support */ -#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ - /* - * Configuration options defines. + * wanrouter.h Legacy declarations kept around until X25 is removed */ -/* general options */ -#define WANOPT_OFF 0 -#define WANOPT_ON 1 -#define WANOPT_NO 0 -#define WANOPT_YES 1 - -/* intercace options */ -#define WANOPT_RS232 0 -#define WANOPT_V35 1 - -/* data encoding options */ -#define WANOPT_NRZ 0 -#define WANOPT_NRZI 1 -#define WANOPT_FM0 2 -#define WANOPT_FM1 3 - -/* link type options */ -#define WANOPT_POINTTOPOINT 0 /* RTS always active */ -#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ - -/* clocking options */ -#define WANOPT_EXTERNAL 0 -#define WANOPT_INTERNAL 1 - -/* station options */ -#define WANOPT_DTE 0 -#define WANOPT_DCE 1 -#define WANOPT_CPE 0 -#define WANOPT_NODE 1 -#define WANOPT_SECONDARY 0 -#define WANOPT_PRIMARY 1 - -/* connection options */ -#define WANOPT_PERMANENT 0 /* DTR always active */ -#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ -#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ - -/* frame relay in-channel signalling */ -#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ -#define WANOPT_FR_Q933 2 /* ITU Q.933A */ -#define WANOPT_FR_LMI 3 /* LMI */ - -/* PPP IP Mode Options */ -#define WANOPT_PPP_STATIC 0 -#define WANOPT_PPP_HOST 1 -#define WANOPT_PPP_PEER 2 - -/* ASY Mode Options */ -#define WANOPT_ONE 1 -#define WANOPT_TWO 2 -#define WANOPT_ONE_AND_HALF 3 - -#define WANOPT_NONE 0 -#define WANOPT_ODD 1 -#define WANOPT_EVEN 2 - -/* CHDLC Protocol Options */ -/* DF Commented out for now. - -#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT -*/ - -/* Port options */ -#define WANOPT_PRI 0 -#define WANOPT_SEC 1 -/* read mode */ -#define WANOPT_INTR 0 -#define WANOPT_POLL 1 - -#define WANOPT_TTY_SYNC 0 -#define WANOPT_TTY_ASYNC 1 -/*---------------------------------------------------------------------------- - * WAN Link Status Info (for ROUTER_STAT IOCTL). - */ -typedef struct wandev_stat -{ - unsigned state; /* link state */ - unsigned ndev; /* number of configured interfaces */ - - /* link/interface configuration */ - unsigned connection; /* permanent/switched/on-demand */ - unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ - unsigned mtu; /* max. transmit unit for this device */ - - /* physical level statistics */ - unsigned modem_status; /* modem status */ - unsigned rx_frames; /* received frames count */ - unsigned rx_overruns; /* receiver overrun error count */ - unsigned rx_crc_err; /* receive CRC error count */ - unsigned rx_aborts; /* received aborted frames count */ - unsigned rx_bad_length; /* unexpetedly long/short frames count */ - unsigned rx_dropped; /* frames discarded at device level */ - unsigned tx_frames; /* transmitted frames count */ - unsigned tx_underruns; /* aborted transmissions (underruns) count */ - unsigned tx_timeouts; /* transmission timeouts */ - unsigned tx_rejects; /* other transmit errors */ - - /* media level statistics */ - unsigned rx_bad_format; /* frames with invalid format */ - unsigned rx_bad_addr; /* frames with invalid media address */ - unsigned tx_retries; /* frames re-transmitted */ - unsigned reserved[16]; /* reserved for future use */ -} wandev_stat_t; +#ifndef _UAPI_ROUTER_H +#define _UAPI_ROUTER_H /* 'state' defines */ enum wan_states @@ -365,88 +11,7 @@ enum wan_states WAN_UNCONFIGURED, /* link/channel is not configured */ WAN_DISCONNECTED, /* link/channel is disconnected */ WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED, /* link/channel is operational */ - WAN_LIMIT, /* for verification only */ - WAN_DUALPORT, /* for Dual Port cards */ - WAN_DISCONNECTING, - WAN_FT1_READY /* FT1 Configurator Ready */ + WAN_CONNECTED /* link/channel is operational */ }; -enum { - WAN_LOCAL_IP, - WAN_POINTOPOINT_IP, - WAN_NETMASK_IP, - WAN_BROADCAST_IP -}; - -/* 'modem_status' masks */ -#define WAN_MODEM_CTS 0x0001 /* CTS line active */ -#define WAN_MODEM_DCD 0x0002 /* DCD line active */ -#define WAN_MODEM_DTR 0x0010 /* DTR line active */ -#define WAN_MODEM_RTS 0x0020 /* RTS line active */ - -/*---------------------------------------------------------------------------- - * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). - */ -typedef struct wanif_conf -{ - unsigned magic; /* magic number */ - unsigned config_id; /* configuration identifier */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned cir; /* Committed Information Rate fwd,bwd*/ - unsigned bc; /* Committed Burst Size fwd, bwd */ - unsigned be; /* Excess Burst Size fwd, bwd */ - unsigned char enable_IPX; /* Enable or Disable IPX */ - unsigned char inarp; /* Send Inverse ARP requests Y/N */ - unsigned inarp_interval; /* sec, between InARP requests */ - unsigned long network_number; /* Network Number for IPX */ - char mc; /* Multicast on or off */ - char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ - unsigned char port; /* board port */ - unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ - char pap; /* PAP enabled or disabled */ - char chap; /* CHAP enabled or disabled */ - unsigned char userid[511]; /* List of User Id */ - unsigned char passwd[511]; /* List of passwords */ - unsigned char sysname[31]; /* Name of the system */ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ - unsigned char ttl; /* Time To Live for UDP security */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned char if_down; /* brind down interface when disconnected */ - unsigned char gateway; /* Is this interface a gateway */ - unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ - - unsigned char asy_data_trans; /* async API options */ - unsigned char rts_hs_for_receive; /* async Protocol options */ - unsigned char xon_xoff_hs_for_receive; - unsigned char xon_xoff_hs_for_transmit; - unsigned char dcd_hs_for_transmit; - unsigned char cts_hs_for_transmit; - unsigned char async_mode; - unsigned tx_bits_per_char; - unsigned rx_bits_per_char; - unsigned stop_bits; - unsigned char parity; - unsigned break_timer; - unsigned inter_char_timer; - unsigned rx_complete_length; - unsigned xon_char; - unsigned xoff_char; - unsigned char receive_only; /* no transmit buffering (Y/N) */ -} wanif_conf_t; - #endif /* _UAPI_ROUTER_H */ diff --git a/net/wanrouter/Kconfig b/net/wanrouter/Kconfig deleted file mode 100644 index a157a2e..0000000 --- a/net/wanrouter/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -# -# Configuration for WAN router -# - -config WAN_ROUTER - tristate "WAN router (DEPRECATED)" - depends on EXPERIMENTAL - ---help--- - Wide Area Networks (WANs), such as X.25, frame relay and leased - lines, are used to interconnect Local Area Networks (LANs) over vast - distances with data transfer rates significantly higher than those - achievable with commonly used asynchronous modem connections. - Usually, a quite expensive external device called a `WAN router' is - needed to connect to a WAN. - - As an alternative, WAN routing can be built into the Linux kernel. - With relatively inexpensive WAN interface cards available on the - market, a perfectly usable router can be built for less than half - the price of an external router. If you have one of those cards and - wish to use your Linux box as a WAN router, say Y here and also to - the WAN driver for your card, below. You will then need the - wan-tools package which is available from . - - To compile WAN routing support as a module, choose M here: the - module will be called wanrouter. - - If unsure, say N. diff --git a/net/wanrouter/Makefile b/net/wanrouter/Makefile deleted file mode 100644 index 4da14bc..0000000 --- a/net/wanrouter/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the Linux WAN router layer. -# - -obj-$(CONFIG_WAN_ROUTER) += wanrouter.o - -wanrouter-y := wanproc.o wanmain.o diff --git a/net/wanrouter/patchlevel b/net/wanrouter/patchlevel deleted file mode 100644 index c043eea..0000000 --- a/net/wanrouter/patchlevel +++ /dev/null @@ -1 +0,0 @@ -2.2.1 diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c deleted file mode 100644 index 2ab7850..0000000 --- a/net/wanrouter/wanmain.c +++ /dev/null @@ -1,782 +0,0 @@ -/***************************************************************************** -* wanmain.c WAN Multiprotocol Router Module. Main code. -* -* This module is completely hardware-independent and provides -* the following common services for the WAN Link Drivers: -* o WAN device management (registering, unregistering) -* o Network interface management -* o Physical connection management (dial-up, incoming calls) -* o Logical connection management (switched virtual circuits) -* o Protocol encapsulation/decapsulation -* -* Author: Gideon Hack -* -* Copyright: (c) 1995-1999 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Nov 24, 2000 Nenad Corbic Updated for 2.4.X kernels -* Nov 07, 2000 Nenad Corbic Fixed the Mulit-Port PPP for kernels 2.2.16 and -* greater. -* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on -* kernels 2.2.16 or greater. The SyncPPP -* has changed. -* Jul 13, 2000 Nenad Corbic Added SyncPPP support -* Added extra debugging in device_setup(). -* Oct 01, 1999 Gideon Hack Update for s514 PCI card -* Dec 27, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 31, 1997 Alan Cox Hacked it about a bit for 2.1 -* Jun 27, 1997 Alan Cox realigned with vendor code -* Oct 15, 1997 Farhan Thawar changed wan_encapsulate to add a pad byte of 0 -* Apr 20, 1998 Alan Cox Fixed 2.1 symbols -* May 17, 1998 K. Baranowski Fixed SNAP encapsulation in wan_encapsulate -* Dec 15, 1998 Arnaldo Melo support for firmwares of up to 128000 bytes -* check wandev->setup return value -* Dec 22, 1998 Arnaldo Melo vmalloc/vfree used in device_setup to allocate -* kernel memory and copy configuration data to -* kernel space (for big firmwares) -* Jun 02, 1999 Gideon Hack Updates for Linux 2.0.X and 2.2.X kernels. -*****************************************************************************/ - -#include /* offsetof(), etc. */ -#include -#include /* return codes */ -#include -#include /* support for loadable modules */ -#include /* kmalloc(), kfree() */ -#include -#include -#include /* inline mem*, str* functions */ - -#include /* htons(), etc. */ -#include /* WAN router API definitions */ - -#include /* vmalloc, vfree */ -#include /* copy_to/from_user */ -#include /* __initfunc et al. */ - -#define DEV_TO_SLAVE(dev) (*((struct net_device **)netdev_priv(dev))) - -/* - * Function Prototypes - */ - -/* - * WAN device IOCTL handlers - */ - -static DEFINE_MUTEX(wanrouter_mutex); -static int wanrouter_device_setup(struct wan_device *wandev, - wandev_conf_t __user *u_conf); -static int wanrouter_device_stat(struct wan_device *wandev, - wandev_stat_t __user *u_stat); -static int wanrouter_device_shutdown(struct wan_device *wandev); -static int wanrouter_device_new_if(struct wan_device *wandev, - wanif_conf_t __user *u_conf); -static int wanrouter_device_del_if(struct wan_device *wandev, - char __user *u_name); - -/* - * Miscellaneous - */ - -static struct wan_device *wanrouter_find_device(char *name); -static int wanrouter_delete_interface(struct wan_device *wandev, char *name); -static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __acquires(lock); -static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __releases(lock); - - - -/* - * Global Data - */ - -static char wanrouter_fullname[] = "Sangoma WANPIPE Router"; -static char wanrouter_copyright[] = "(c) 1995-2000 Sangoma Technologies Inc."; -static char wanrouter_modname[] = ROUTER_NAME; /* short module name */ -struct wan_device* wanrouter_router_devlist; /* list of registered devices */ - -/* - * Organize Unique Identifiers for encapsulation/decapsulation - */ - -#if 0 -static unsigned char wanrouter_oui_ether[] = { 0x00, 0x00, 0x00 }; -static unsigned char wanrouter_oui_802_2[] = { 0x00, 0x80, 0xC2 }; -#endif - -static int __init wanrouter_init(void) -{ - int err; - - printk(KERN_INFO "%s v%u.%u %s\n", - wanrouter_fullname, ROUTER_VERSION, ROUTER_RELEASE, - wanrouter_copyright); - - err = wanrouter_proc_init(); - if (err) - printk(KERN_INFO "%s: can't create entry in proc filesystem!\n", - wanrouter_modname); - - return err; -} - -static void __exit wanrouter_cleanup (void) -{ - wanrouter_proc_cleanup(); -} - -/* - * This is just plain dumb. We should move the bugger to drivers/net/wan, - * slap it first in directory and make it module_init(). The only reason - * for subsys_initcall() here is that net goes after drivers (why, BTW?) - */ -subsys_initcall(wanrouter_init); -module_exit(wanrouter_cleanup); - -/* - * Kernel APIs - */ - -/* - * Register WAN device. - * o verify device credentials - * o create an entry for the device in the /proc/net/router directory - * o initialize internally maintained fields of the wan_device structure - * o link device data space to a singly-linked list - * o if it's the first device, then start kernel 'thread' - * o increment module use count - * - * Return: - * 0 Ok - * < 0 error. - * - * Context: process - */ - - -int register_wan_device(struct wan_device *wandev) -{ - int err, namelen; - - if ((wandev == NULL) || (wandev->magic != ROUTER_MAGIC) || - (wandev->name == NULL)) - return -EINVAL; - - namelen = strlen(wandev->name); - if (!namelen || (namelen > WAN_DRVNAME_SZ)) - return -EINVAL; - - if (wanrouter_find_device(wandev->name)) - return -EEXIST; - -#ifdef WANDEBUG - printk(KERN_INFO "%s: registering WAN device %s\n", - wanrouter_modname, wandev->name); -#endif - - /* - * Register /proc directory entry - */ - err = wanrouter_proc_add(wandev); - if (err) { - printk(KERN_INFO - "%s: can't create /proc/net/router/%s entry!\n", - wanrouter_modname, wandev->name); - return err; - } - - /* - * Initialize fields of the wan_device structure maintained by the - * router and update local data. - */ - - wandev->ndev = 0; - wandev->dev = NULL; - wandev->next = wanrouter_router_devlist; - wanrouter_router_devlist = wandev; - return 0; -} - -/* - * Unregister WAN device. - * o shut down device - * o unlink device data space from the linked list - * o delete device entry in the /proc/net/router directory - * o decrement module use count - * - * Return: 0 Ok - * <0 error. - * Context: process - */ - - -int unregister_wan_device(char *name) -{ - struct wan_device *wandev, *prev; - - if (name == NULL) - return -EINVAL; - - for (wandev = wanrouter_router_devlist, prev = NULL; - wandev && strcmp(wandev->name, name); - prev = wandev, wandev = wandev->next) - ; - if (wandev == NULL) - return -ENODEV; - -#ifdef WANDEBUG - printk(KERN_INFO "%s: unregistering WAN device %s\n", - wanrouter_modname, name); -#endif - - if (wandev->state != WAN_UNCONFIGURED) - wanrouter_device_shutdown(wandev); - - if (prev) - prev->next = wandev->next; - else - wanrouter_router_devlist = wandev->next; - - wanrouter_proc_delete(wandev); - return 0; -} - -#if 0 - -/* - * Encapsulate packet. - * - * Return: encapsulation header size - * < 0 - unsupported Ethertype - * - * Notes: - * 1. This function may be called on interrupt context. - */ - - -int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev, - unsigned short type) -{ - int hdr_len = 0; - - switch (type) { - case ETH_P_IP: /* IP datagram encapsulation */ - hdr_len += 1; - skb_push(skb, 1); - skb->data[0] = NLPID_IP; - break; - - case ETH_P_IPX: /* SNAP encapsulation */ - case ETH_P_ARP: - hdr_len += 7; - skb_push(skb, 7); - skb->data[0] = 0; - skb->data[1] = NLPID_SNAP; - skb_copy_to_linear_data_offset(skb, 2, wanrouter_oui_ether, - sizeof(wanrouter_oui_ether)); - *((unsigned short*)&skb->data[5]) = htons(type); - break; - - default: /* Unknown packet type */ - printk(KERN_INFO - "%s: unsupported Ethertype 0x%04X on interface %s!\n", - wanrouter_modname, type, dev->name); - hdr_len = -EINVAL; - } - return hdr_len; -} - - -/* - * Decapsulate packet. - * - * Return: Ethertype (in network order) - * 0 unknown encapsulation - * - * Notes: - * 1. This function may be called on interrupt context. - */ - - -__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev) -{ - int cnt = skb->data[0] ? 0 : 1; /* there may be a pad present */ - __be16 ethertype; - - switch (skb->data[cnt]) { - case NLPID_IP: /* IP datagramm */ - ethertype = htons(ETH_P_IP); - cnt += 1; - break; - - case NLPID_SNAP: /* SNAP encapsulation */ - if (memcmp(&skb->data[cnt + 1], wanrouter_oui_ether, - sizeof(wanrouter_oui_ether))){ - printk(KERN_INFO - "%s: unsupported SNAP OUI %02X-%02X-%02X " - "on interface %s!\n", wanrouter_modname, - skb->data[cnt+1], skb->data[cnt+2], - skb->data[cnt+3], dev->name); - return 0; - } - ethertype = *((__be16*)&skb->data[cnt+4]); - cnt += 6; - break; - - /* add other protocols, e.g. CLNP, ESIS, ISIS, if needed */ - - default: - printk(KERN_INFO - "%s: unsupported NLPID 0x%02X on interface %s!\n", - wanrouter_modname, skb->data[cnt], dev->name); - return 0; - } - skb->protocol = ethertype; - skb->pkt_type = PACKET_HOST; /* Physically point to point */ - skb_pull(skb, cnt); - skb_reset_mac_header(skb); - return ethertype; -} - -#endif /* 0 */ - -/* - * WAN device IOCTL. - * o find WAN device associated with this node - * o execute requested action or pass command to the device driver - */ - -long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct inode *inode = file->f_path.dentry->d_inode; - int err = 0; - struct proc_dir_entry *dent; - struct wan_device *wandev; - void __user *data = (void __user *)arg; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if ((cmd >> 8) != ROUTER_IOCTL) - return -EINVAL; - - dent = PDE(inode); - if ((dent == NULL) || (dent->data == NULL)) - return -EINVAL; - - wandev = dent->data; - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - - mutex_lock(&wanrouter_mutex); - switch (cmd) { - case ROUTER_SETUP: - err = wanrouter_device_setup(wandev, data); - break; - - case ROUTER_DOWN: - err = wanrouter_device_shutdown(wandev); - break; - - case ROUTER_STAT: - err = wanrouter_device_stat(wandev, data); - break; - - case ROUTER_IFNEW: - err = wanrouter_device_new_if(wandev, data); - break; - - case ROUTER_IFDEL: - err = wanrouter_device_del_if(wandev, data); - break; - - case ROUTER_IFSTAT: - break; - - default: - if ((cmd >= ROUTER_USER) && - (cmd <= ROUTER_USER_MAX) && - wandev->ioctl) - err = wandev->ioctl(wandev, cmd, arg); - else err = -EINVAL; - } - mutex_unlock(&wanrouter_mutex); - return err; -} - -/* - * WAN Driver IOCTL Handlers - */ - -/* - * Setup WAN link device. - * o verify user address space - * o allocate kernel memory and copy configuration data to kernel space - * o if configuration data includes extension, copy it to kernel space too - * o call driver's setup() entry point - */ - -static int wanrouter_device_setup(struct wan_device *wandev, - wandev_conf_t __user *u_conf) -{ - void *data = NULL; - wandev_conf_t *conf; - int err = -EINVAL; - - if (wandev->setup == NULL) { /* Nothing to do ? */ - printk(KERN_INFO "%s: ERROR, No setup script: wandev->setup()\n", - wandev->name); - return 0; - } - - conf = kmalloc(sizeof(wandev_conf_t), GFP_KERNEL); - if (conf == NULL){ - printk(KERN_INFO "%s: ERROR, Failed to allocate kernel memory !\n", - wandev->name); - return -ENOBUFS; - } - - if (copy_from_user(conf, u_conf, sizeof(wandev_conf_t))) { - printk(KERN_INFO "%s: Failed to copy user config data to kernel space!\n", - wandev->name); - kfree(conf); - return -EFAULT; - } - - if (conf->magic != ROUTER_MAGIC) { - kfree(conf); - printk(KERN_INFO "%s: ERROR, Invalid MAGIC Number\n", - wandev->name); - return -EINVAL; - } - - if (conf->data_size && conf->data) { - if (conf->data_size > 128000) { - printk(KERN_INFO - "%s: ERROR, Invalid firmware data size %i !\n", - wandev->name, conf->data_size); - kfree(conf); - return -EINVAL; - } - - data = vmalloc(conf->data_size); - if (!data) { - printk(KERN_INFO - "%s: ERROR, Failed allocate kernel memory !\n", - wandev->name); - kfree(conf); - return -ENOBUFS; - } - if (!copy_from_user(data, conf->data, conf->data_size)) { - conf->data = data; - err = wandev->setup(wandev, conf); - } else { - printk(KERN_INFO - "%s: ERROR, Failed to copy from user data !\n", - wandev->name); - err = -EFAULT; - } - vfree(data); - } else { - printk(KERN_INFO - "%s: ERROR, No firmware found ! Firmware size = %i !\n", - wandev->name, conf->data_size); - } - - kfree(conf); - return err; -} - -/* - * Shutdown WAN device. - * o delete all not opened logical channels for this device - * o call driver's shutdown() entry point - */ - -static int wanrouter_device_shutdown(struct wan_device *wandev) -{ - struct net_device *dev; - int err=0; - - if (wandev->state == WAN_UNCONFIGURED) - return 0; - - printk(KERN_INFO "\n%s: Shutting Down!\n",wandev->name); - - for (dev = wandev->dev; dev;) { - err = wanrouter_delete_interface(wandev, dev->name); - if (err) - return err; - /* The above function deallocates the current dev - * structure. Therefore, we cannot use netdev_priv(dev) - * as the next element: wandev->dev points to the - * next element */ - dev = wandev->dev; - } - - if (wandev->ndev) - return -EBUSY; /* there are opened interfaces */ - - if (wandev->shutdown) - err=wandev->shutdown(wandev); - - return err; -} - -/* - * Get WAN device status & statistics. - */ - -static int wanrouter_device_stat(struct wan_device *wandev, - wandev_stat_t __user *u_stat) -{ - wandev_stat_t stat; - - memset(&stat, 0, sizeof(stat)); - - /* Ask device driver to update device statistics */ - if ((wandev->state != WAN_UNCONFIGURED) && wandev->update) - wandev->update(wandev); - - /* Fill out structure */ - stat.ndev = wandev->ndev; - stat.state = wandev->state; - - if (copy_to_user(u_stat, &stat, sizeof(stat))) - return -EFAULT; - - return 0; -} - -/* - * Create new WAN interface. - * o verify user address space - * o copy configuration data to kernel address space - * o allocate network interface data space - * o call driver's new_if() entry point - * o make sure there is no interface name conflict - * o register network interface - */ - -static int wanrouter_device_new_if(struct wan_device *wandev, - wanif_conf_t __user *u_conf) -{ - wanif_conf_t *cnf; - struct net_device *dev = NULL; - int err; - - if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL)) - return -ENODEV; - - cnf = kmalloc(sizeof(wanif_conf_t), GFP_KERNEL); - if (!cnf) - return -ENOBUFS; - - err = -EFAULT; - if (copy_from_user(cnf, u_conf, sizeof(wanif_conf_t))) - goto out; - - err = -EINVAL; - if (cnf->magic != ROUTER_MAGIC) - goto out; - - if (cnf->config_id == WANCONFIG_MPPP) { - printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n", - wandev->name); - err = -EPROTONOSUPPORT; - goto out; - } else { - err = wandev->new_if(wandev, dev, cnf); - } - - if (!err) { - /* Register network interface. This will invoke init() - * function supplied by the driver. If device registered - * successfully, add it to the interface list. - */ - -#ifdef WANDEBUG - printk(KERN_INFO "%s: registering interface %s...\n", - wanrouter_modname, dev->name); -#endif - - err = register_netdev(dev); - if (!err) { - struct net_device *slave = NULL; - unsigned long smp_flags=0; - - lock_adapter_irq(&wandev->lock, &smp_flags); - - if (wandev->dev == NULL) { - wandev->dev = dev; - } else { - for (slave=wandev->dev; - DEV_TO_SLAVE(slave); - slave = DEV_TO_SLAVE(slave)) - DEV_TO_SLAVE(slave) = dev; - } - ++wandev->ndev; - - unlock_adapter_irq(&wandev->lock, &smp_flags); - err = 0; /* done !!! */ - goto out; - } - if (wandev->del_if) - wandev->del_if(wandev, dev); - free_netdev(dev); - } - -out: - kfree(cnf); - return err; -} - - -/* - * Delete WAN logical channel. - * o verify user address space - * o copy configuration data to kernel address space - */ - -static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name) -{ - char name[WAN_IFNAME_SZ + 1]; - int err = 0; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - memset(name, 0, sizeof(name)); - - if (copy_from_user(name, u_name, WAN_IFNAME_SZ)) - return -EFAULT; - - err = wanrouter_delete_interface(wandev, name); - if (err) - return err; - - /* If last interface being deleted, shutdown card - * This helps with administration at leaf nodes - * (You can tell if the person at the other end of the phone - * has an interface configured) and avoids DoS vulnerabilities - * in binary driver files - this fixes a problem with the current - * Sangoma driver going into strange states when all the network - * interfaces are deleted and the link irrecoverably disconnected. - */ - - if (!wandev->ndev && wandev->shutdown) - err = wandev->shutdown(wandev); - - return err; -} - -/* - * Miscellaneous Functions - */ - -/* - * Find WAN device by name. - * Return pointer to the WAN device data space or NULL if device not found. - */ - -static struct wan_device *wanrouter_find_device(char *name) -{ - struct wan_device *wandev; - - for (wandev = wanrouter_router_devlist; - wandev && strcmp(wandev->name, name); - wandev = wandev->next); - return wandev; -} - -/* - * Delete WAN logical channel identified by its name. - * o find logical channel by its name - * o call driver's del_if() entry point - * o unregister network interface - * o unlink channel data space from linked list of channels - * o release channel data space - * - * Return: 0 success - * -ENODEV channel not found. - * -EBUSY interface is open - * - * Note: If (force != 0), then device will be destroyed even if interface - * associated with it is open. It's caller's responsibility to make - * sure that opened interfaces are not removed! - */ - -static int wanrouter_delete_interface(struct wan_device *wandev, char *name) -{ - struct net_device *dev = NULL, *prev = NULL; - unsigned long smp_flags=0; - - lock_adapter_irq(&wandev->lock, &smp_flags); - dev = wandev->dev; - prev = NULL; - while (dev && strcmp(name, dev->name)) { - struct net_device **slave = netdev_priv(dev); - prev = dev; - dev = *slave; - } - unlock_adapter_irq(&wandev->lock, &smp_flags); - - if (dev == NULL) - return -ENODEV; /* interface not found */ - - if (netif_running(dev)) - return -EBUSY; /* interface in use */ - - if (wandev->del_if) - wandev->del_if(wandev, dev); - - lock_adapter_irq(&wandev->lock, &smp_flags); - if (prev) { - struct net_device **prev_slave = netdev_priv(prev); - struct net_device **slave = netdev_priv(dev); - - *prev_slave = *slave; - } else { - struct net_device **slave = netdev_priv(dev); - wandev->dev = *slave; - } - --wandev->ndev; - unlock_adapter_irq(&wandev->lock, &smp_flags); - - printk(KERN_INFO "%s: unregistering '%s'\n", wandev->name, dev->name); - - unregister_netdev(dev); - - free_netdev(dev); - - return 0; -} - -static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __acquires(lock) -{ - spin_lock_irqsave(lock, *smp_flags); -} - - -static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __releases(lock) -{ - spin_unlock_irqrestore(lock, *smp_flags); -} - -EXPORT_SYMBOL(register_wan_device); -EXPORT_SYMBOL(unregister_wan_device); - -MODULE_LICENSE("GPL"); - -/* - * End - */ diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c deleted file mode 100644 index c43612e..0000000 --- a/net/wanrouter/wanproc.c +++ /dev/null @@ -1,380 +0,0 @@ -/***************************************************************************** -* wanproc.c WAN Router Module. /proc filesystem interface. -* -* This module is completely hardware-independent and provides -* access to the router using Linux /proc filesystem. -* -* Author: Gideon Hack -* -* Copyright: (c) 1995-1999 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jun 02, 1999 Gideon Hack Updates for Linux 2.2.X kernels. -* Jun 29, 1997 Alan Cox Merged with 1.0.3 vendor code -* Jan 29, 1997 Gene Kozin v1.0.1. Implemented /proc read routines -* Jan 30, 1997 Alan Cox Hacked around for 2.1 -* Dec 13, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) -*****************************************************************************/ - -#include /* __initfunc et al. */ -#include /* offsetof(), etc. */ -#include /* return codes */ -#include -#include -#include /* WAN router API definitions */ -#include -#include - -#include -#include - -#define PROC_STATS_FORMAT "%30s: %12lu\n" - -/****** Defines and Macros **************************************************/ - -#define PROT_DECODE(prot) ((prot == WANCONFIG_FR) ? " FR" :\ - (prot == WANCONFIG_X25) ? " X25" : \ - (prot == WANCONFIG_PPP) ? " PPP" : \ - (prot == WANCONFIG_CHDLC) ? " CHDLC": \ - (prot == WANCONFIG_MPPP) ? " MPPP" : \ - " Unknown" ) - -/****** Function Prototypes *************************************************/ - -#ifdef CONFIG_PROC_FS - -/* Miscellaneous */ - -/* - * Structures for interfacing with the /proc filesystem. - * Router creates its own directory /proc/net/router with the following - * entries: - * config device configuration - * status global device statistics - * entry for each WAN device - */ - -/* - * Generic /proc/net/router/ file and inode operations - */ - -/* - * /proc/net/router - */ - -static DEFINE_MUTEX(config_mutex); -static struct proc_dir_entry *proc_router; - -/* Strings */ - -/* - * Interface functions - */ - -/****** Proc filesystem entry points ****************************************/ - -/* - * Iterator - */ -static void *r_start(struct seq_file *m, loff_t *pos) -{ - struct wan_device *wandev; - loff_t l = *pos; - - mutex_lock(&config_mutex); - if (!l--) - return SEQ_START_TOKEN; - for (wandev = wanrouter_router_devlist; l-- && wandev; - wandev = wandev->next) - ; - return wandev; -} - -static void *r_next(struct seq_file *m, void *v, loff_t *pos) -{ - struct wan_device *wandev = v; - (*pos)++; - return (v == SEQ_START_TOKEN) ? wanrouter_router_devlist : wandev->next; -} - -static void r_stop(struct seq_file *m, void *v) -{ - mutex_unlock(&config_mutex); -} - -static int config_show(struct seq_file *m, void *v) -{ - struct wan_device *p = v; - if (v == SEQ_START_TOKEN) { - seq_puts(m, "Device name | port |IRQ|DMA| mem.addr |" - "mem.size|option1|option2|option3|option4\n"); - return 0; - } - if (!p->state) - return 0; - seq_printf(m, "%-15s|0x%-4X|%3u|%3u| 0x%-8lX |0x%-6X|%7u|%7u|%7u|%7u\n", - p->name, p->ioport, p->irq, p->dma, p->maddr, p->msize, - p->hw_opt[0], p->hw_opt[1], p->hw_opt[2], p->hw_opt[3]); - return 0; -} - -static int status_show(struct seq_file *m, void *v) -{ - struct wan_device *p = v; - if (v == SEQ_START_TOKEN) { - seq_puts(m, "Device name |protocol|station|interface|" - "clocking|baud rate| MTU |ndev|link state\n"); - return 0; - } - if (!p->state) - return 0; - seq_printf(m, "%-15s|%-8s| %-7s| %-9s|%-8s|%9u|%5u|%3u |", - p->name, - PROT_DECODE(p->config_id), - p->config_id == WANCONFIG_FR ? - (p->station ? "Node" : "CPE") : - (p->config_id == WANCONFIG_X25 ? - (p->station ? "DCE" : "DTE") : - ("N/A")), - p->interface ? "V.35" : "RS-232", - p->clocking ? "internal" : "external", - p->bps, - p->mtu, - p->ndev); - - switch (p->state) { - case WAN_UNCONFIGURED: - seq_printf(m, "%-12s\n", "unconfigured"); - break; - case WAN_DISCONNECTED: - seq_printf(m, "%-12s\n", "disconnected"); - break; - case WAN_CONNECTING: - seq_printf(m, "%-12s\n", "connecting"); - break; - case WAN_CONNECTED: - seq_printf(m, "%-12s\n", "connected"); - break; - default: - seq_printf(m, "%-12s\n", "invalid"); - break; - } - return 0; -} - -static const struct seq_operations config_op = { - .start = r_start, - .next = r_next, - .stop = r_stop, - .show = config_show, -}; - -static const struct seq_operations status_op = { - .start = r_start, - .next = r_next, - .stop = r_stop, - .show = status_show, -}; - -static int config_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &config_op); -} - -static int status_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &status_op); -} - -static const struct file_operations config_fops = { - .owner = THIS_MODULE, - .open = config_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static const struct file_operations status_fops = { - .owner = THIS_MODULE, - .open = status_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int wandev_show(struct seq_file *m, void *v) -{ - struct wan_device *wandev = m->private; - - if (wandev->magic != ROUTER_MAGIC) - return 0; - - if (!wandev->state) { - seq_puts(m, "device is not configured!\n"); - return 0; - } - - /* Update device statistics */ - if (wandev->update) { - int err = wandev->update(wandev); - if (err == -EAGAIN) { - seq_puts(m, "Device is busy!\n"); - return 0; - } - if (err) { - seq_puts(m, "Device is not configured!\n"); - return 0; - } - } - - seq_printf(m, PROC_STATS_FORMAT, - "total packets received", wandev->stats.rx_packets); - seq_printf(m, PROC_STATS_FORMAT, - "total packets transmitted", wandev->stats.tx_packets); - seq_printf(m, PROC_STATS_FORMAT, - "total bytes received", wandev->stats.rx_bytes); - seq_printf(m, PROC_STATS_FORMAT, - "total bytes transmitted", wandev->stats.tx_bytes); - seq_printf(m, PROC_STATS_FORMAT, - "bad packets received", wandev->stats.rx_errors); - seq_printf(m, PROC_STATS_FORMAT, - "packet transmit problems", wandev->stats.tx_errors); - seq_printf(m, PROC_STATS_FORMAT, - "received frames dropped", wandev->stats.rx_dropped); - seq_printf(m, PROC_STATS_FORMAT, - "transmit frames dropped", wandev->stats.tx_dropped); - seq_printf(m, PROC_STATS_FORMAT, - "multicast packets received", wandev->stats.multicast); - seq_printf(m, PROC_STATS_FORMAT, - "transmit collisions", wandev->stats.collisions); - seq_printf(m, PROC_STATS_FORMAT, - "receive length errors", wandev->stats.rx_length_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver overrun errors", wandev->stats.rx_over_errors); - seq_printf(m, PROC_STATS_FORMAT, - "CRC errors", wandev->stats.rx_crc_errors); - seq_printf(m, PROC_STATS_FORMAT, - "frame format errors (aborts)", wandev->stats.rx_frame_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver fifo overrun", wandev->stats.rx_fifo_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver missed packet", wandev->stats.rx_missed_errors); - seq_printf(m, PROC_STATS_FORMAT, - "aborted frames transmitted", wandev->stats.tx_aborted_errors); - return 0; -} - -static int wandev_open(struct inode *inode, struct file *file) -{ - return single_open(file, wandev_show, PDE(inode)->data); -} - -static const struct file_operations wandev_fops = { - .owner = THIS_MODULE, - .open = wandev_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .unlocked_ioctl = wanrouter_ioctl, -}; - -/* - * Initialize router proc interface. - */ - -int __init wanrouter_proc_init(void) -{ - struct proc_dir_entry *p; - proc_router = proc_mkdir(ROUTER_NAME, init_net.proc_net); - if (!proc_router) - goto fail; - - p = proc_create("config", S_IRUGO, proc_router, &config_fops); - if (!p) - goto fail_config; - p = proc_create("status", S_IRUGO, proc_router, &status_fops); - if (!p) - goto fail_stat; - return 0; -fail_stat: - remove_proc_entry("config", proc_router); -fail_config: - remove_proc_entry(ROUTER_NAME, init_net.proc_net); -fail: - return -ENOMEM; -} - -/* - * Clean up router proc interface. - */ - -void wanrouter_proc_cleanup(void) -{ - remove_proc_entry("config", proc_router); - remove_proc_entry("status", proc_router); - remove_proc_entry(ROUTER_NAME, init_net.proc_net); -} - -/* - * Add directory entry for WAN device. - */ - -int wanrouter_proc_add(struct wan_device* wandev) -{ - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - - wandev->dent = proc_create(wandev->name, S_IRUGO, - proc_router, &wandev_fops); - if (!wandev->dent) - return -ENOMEM; - wandev->dent->data = wandev; - return 0; -} - -/* - * Delete directory entry for WAN device. - */ -int wanrouter_proc_delete(struct wan_device* wandev) -{ - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - remove_proc_entry(wandev->name, proc_router); - return 0; -} - -#else - -/* - * No /proc - output stubs - */ - -int __init wanrouter_proc_init(void) -{ - return 0; -} - -void wanrouter_proc_cleanup(void) -{ -} - -int wanrouter_proc_add(struct wan_device *wandev) -{ - return 0; -} - -int wanrouter_proc_delete(struct wan_device *wandev) -{ - return 0; -} - -#endif - -/* - * End - */ - -- cgit v0.10.2 From d1d18b30f099fdfd688a34325a02a806ea86c5a2 Mon Sep 17 00:00:00 2001 From: Amir Hanania Date: Tue, 4 Dec 2012 03:03:03 +0000 Subject: ixgbe: Reset the NIC if up2tc has changed Check for up2tc change and call ixgbe_dcbnl_devreset() if the mapping has changed but the number of TC's in use has not changed. Signed-off-by: Amir Hanania Tested-by: Jack Morgan Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 6718fb4..c261333 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -302,7 +302,6 @@ static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, *setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc; } -#ifdef IXGBE_FCOE static void ixgbe_dcbnl_devreset(struct net_device *dev) { struct ixgbe_adapter *adapter = netdev_priv(dev); @@ -321,7 +320,6 @@ static void ixgbe_dcbnl_devreset(struct net_device *dev) clear_bit(__IXGBE_RESETTING, &adapter->state); } -#endif static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) { @@ -542,6 +540,7 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN; int i, err = 0; __u8 max_tc = 0; + __u8 map_chg = 0; if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) return -EINVAL; @@ -551,15 +550,22 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, GFP_KERNEL); if (!adapter->ixgbe_ieee_ets) return -ENOMEM; - } - memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets)); + /* initialize UP2TC mappings to invalid value */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + adapter->ixgbe_ieee_ets->prio_tc[i] = + IEEE_8021QAZ_MAX_TCS; + } for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { if (ets->prio_tc[i] > max_tc) max_tc = ets->prio_tc[i]; + if (ets->prio_tc[i] != adapter->ixgbe_ieee_ets->prio_tc[i]) + map_chg = 1; } + memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets)); + if (max_tc) max_tc++; @@ -568,6 +574,8 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, if (max_tc != netdev_get_num_tc(dev)) err = ixgbe_setup_tc(dev, max_tc); + else if (map_chg) + ixgbe_dcbnl_devreset(dev); if (err) goto err_out; -- cgit v0.10.2 From b4fafbe97f9548f49b9338537c25a3db451b8508 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Thu, 13 Dec 2012 01:14:06 +0000 Subject: ixgbe: Fix device ref count bug The device lookup neglected to do a pci_dev_put() to decrement the device reference count. Reported-by: Elena Gurevich Signed-off-by: Greg Rose Tested-by: Phil Schmitt Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 5989b3f..1f53675 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7758,6 +7758,8 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, if (vfdev) { e_dev_err("Issuing VFLR to VF %d\n", vf); pci_write_config_dword(vfdev, 0xA8, 0x00008000); + /* Free device reference count */ + pci_dev_put(vfdev); } pci_cleanup_aer_uncorrect_error_status(pdev); -- cgit v0.10.2 From 3d292265603fe6d59407c6c6c017cc156e3d4011 Mon Sep 17 00:00:00 2001 From: Josh Hay Date: Sat, 15 Dec 2012 03:28:19 +0000 Subject: ixgbe: rename autoneg variables Renames some autoneg/speed variables to be more consistent with check_link, get_link_capabilities, and setup_link function calls. Initializes instances of autoneg. Signed-off-by: Josh Hay Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 1073aea..29d6aa9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -234,13 +234,13 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) * ixgbe_get_link_capabilities_82599 - Determines link capabilities * @hw: pointer to hardware structure * @speed: pointer to link speed - * @negotiation: true when autoneg or autotry is enabled + * @autoneg: true when autoneg or autotry is enabled * * Determines the link capabilities by reading the AUTOC register. **/ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *negotiation) + bool *autoneg) { s32 status = 0; u32 autoc = 0; @@ -251,7 +251,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; goto out; } @@ -268,22 +268,22 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, switch (autoc & IXGBE_AUTOC_LMS_MASK) { case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_1G_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_10G_SERIAL: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_KX4_KX_KR: @@ -295,7 +295,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: @@ -306,12 +306,12 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_SGMII_1G_100M: *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; - *negotiation = false; + *autoneg = false; break; default: @@ -323,7 +323,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, if (hw->phy.multispeed_fiber) { *speed |= IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; } out: @@ -527,11 +527,10 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); u32 i = 0; bool link_up = false; - bool negotiation; /* Mask off requested but non-supported speeds */ status = hw->mac.ops.get_link_capabilities(hw, &link_speed, - &negotiation); + &autoneg); if (status != 0) return status; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1f53675..d914289 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2178,10 +2178,10 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) return; if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { - u32 autoneg; + u32 speed; bool link_up = false; - hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + hw->mac.ops.check_link(hw, &speed, &link_up, false); if (link_up) return; @@ -3994,25 +3994,25 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) **/ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) { - u32 autoneg; - bool negotiation, link_up = false; + u32 speed; + bool autoneg, link_up = false; u32 ret = IXGBE_ERR_LINK_SETUP; if (hw->mac.ops.check_link) - ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); if (ret) goto link_cfg_out; - autoneg = hw->phy.autoneg_advertised; - if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, - &negotiation); + speed = hw->phy.autoneg_advertised; + if ((!speed) && (hw->mac.ops.get_link_capabilities)) + ret = hw->mac.ops.get_link_capabilities(hw, &speed, + &autoneg); if (ret) goto link_cfg_out; if (hw->mac.ops.setup_link) - ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up); + ret = hw->mac.ops.setup_link(hw, speed, autoneg, link_up); link_cfg_out: return ret; } @@ -5739,8 +5739,8 @@ sfp_out: static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; - u32 autoneg; - bool negotiation; + u32 speed; + bool autoneg = false; if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) return; @@ -5751,11 +5751,11 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; - autoneg = hw->phy.autoneg_advertised; - if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); + speed = hw->phy.autoneg_advertised; + if ((!speed) && (hw->mac.ops.get_link_capabilities)) + hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); if (hw->mac.ops.setup_link) - hw->mac.ops.setup_link(hw, autoneg, negotiation, true); + hw->mac.ops.setup_link(hw, speed, autoneg, true); adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; adapter->link_check_timeout = jiffies; -- cgit v0.10.2 From 99b76642ca28841fe71c870a3bfbcb164fe04388 Mon Sep 17 00:00:00 2001 From: Josh Hay Date: Sat, 15 Dec 2012 03:28:24 +0000 Subject: ixgbe: removed unused variable from setup_link_speed Removes the autoneg parameter from the setup_link_speed functions. These functions do nothing with this parameter. Signed-off-by: Josh Hay Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 4253733..dd1f0cf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -698,7 +698,7 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, s32 status; /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); /* Set up MAC */ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 29d6aa9..6ad82cb 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -923,7 +923,7 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, s32 status; /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); /* Set up MAC */ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 71659ed..f4b2c0d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -494,11 +494,9 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled **/ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index cc18165..51b0a91 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -98,7 +98,6 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 9cd8a13..85f76cc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2869,8 +2869,7 @@ struct ixgbe_phy_operations { s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); s32 (*setup_link)(struct ixgbe_hw *); - s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool, - bool); + s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index c73b929..4ec5019 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -79,7 +79,7 @@ static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete) { - return hw->phy.ops.setup_link_speed(hw, speed, autoneg, + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); } -- cgit v0.10.2 From fd0326f2cf9e5d1d3dbcf4ea0da9accc762c4e52 Mon Sep 17 00:00:00 2001 From: Josh Hay Date: Sat, 15 Dec 2012 03:28:30 +0000 Subject: ixgbe: autoneg variable refactoring Removes the autoneg parameter from the setup_link functions. Adds local variable autoneg to setup_link functions to be passed to get_link_capabilities functions if needed. Signed-off-by: Josh Hay Tested-by: Phil Schmitt diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index dd1f0cf..7fd3833 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -41,7 +41,6 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); @@ -633,15 +632,15 @@ out: * ixgbe_setup_mac_link_82598 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if auto-negotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { + bool autoneg = false; s32 status = 0; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -685,14 +684,12 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true if waiting is needed to complete * * Sets the link speed in the AUTOC register in the MAC and restarts link. **/ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status; @@ -1311,4 +1308,3 @@ struct ixgbe_info ixgbe_82598_info = { .eeprom_ops = &eeprom_ops_82598, .phy_ops = &phy_ops_82598, }; - diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 6ad82cb..3350461 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -45,21 +45,17 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); @@ -510,14 +506,12 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status = 0; @@ -527,6 +521,7 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); u32 i = 0; bool link_up = false; + bool autoneg = false; /* Mask off requested but non-supported speeds */ status = hw->mac.ops.get_link_capabilities(hw, &link_speed, @@ -563,7 +558,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_10GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; @@ -616,7 +610,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_1GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; @@ -645,7 +638,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, if (speedcnt > 1) status = ixgbe_setup_mac_link_multispeed_fiber(hw, highest_link_speed, - autoneg, autoneg_wait_to_complete); out: @@ -665,13 +657,12 @@ out: * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Implements the Intel SmartSpeed algorithm. **/ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, + ixgbe_link_speed speed, bool autoneg_wait_to_complete) { s32 status = 0; @@ -702,7 +693,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* First, try to get link with full advertisement */ hw->phy.smart_speed_active = false; for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -737,7 +728,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* Turn SmartSpeed on to disable KR support */ hw->phy.smart_speed_active = true; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -763,7 +754,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* We didn't get link. Turn SmartSpeed back off. */ hw->phy.smart_speed_active = false; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); out: @@ -777,14 +768,13 @@ out: * ixgbe_setup_mac_link_82599 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { s32 status = 0; u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -798,6 +788,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, u32 i; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; bool got_lock = false; + bool autoneg = false; /* Check to see if speed passed in is supported. */ status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities, @@ -910,14 +901,12 @@ out: * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true if waiting is needed to complete * * Restarts link on PHY and MAC based on settings passed in. **/ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 1513b10..216203e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -156,7 +156,7 @@ static int ixgbe_get_settings(struct net_device *netdev, struct ixgbe_hw *hw = &adapter->hw; ixgbe_link_speed supported_link; u32 link_speed = 0; - bool autoneg; + bool autoneg = false; bool link_up; hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg); @@ -333,10 +333,10 @@ static int ixgbe_set_settings(struct net_device *netdev, return err; /* this sets the link speed and restarts auto-neg */ hw->mac.autotry_restart = true; - err = hw->mac.ops.setup_link(hw, advertised, true, true); + err = hw->mac.ops.setup_link(hw, advertised, true); if (err) { e_info(probe, "setup link failed with code %d\n", err); - hw->mac.ops.setup_link(hw, old, true, true); + hw->mac.ops.setup_link(hw, old, true); } } else { /* in this case we currently only support 10Gb/FULL */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index d914289..ac41361 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4012,7 +4012,7 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) goto link_cfg_out; if (hw->mac.ops.setup_link) - ret = hw->mac.ops.setup_link(hw, speed, autoneg, link_up); + ret = hw->mac.ops.setup_link(hw, speed, link_up); link_cfg_out: return ret; } @@ -5755,7 +5755,7 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) if ((!speed) && (hw->mac.ops.get_link_capabilities)) hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); if (hw->mac.ops.setup_link) - hw->mac.ops.setup_link(hw, speed, autoneg, true); + hw->mac.ops.setup_link(hw, speed, true); adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; adapter->link_check_timeout = jiffies; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 85f76cc..0bdcc88 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2822,7 +2822,7 @@ struct ixgbe_mac_operations { void (*disable_tx_laser)(struct ixgbe_hw *); void (*enable_tx_laser)(struct ixgbe_hw *); void (*flap_tx_laser)(struct ixgbe_hw *); - s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); + s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 4ec5019..2fa5843 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -72,12 +72,11 @@ static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed **/ static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); -- cgit v0.10.2 From 0cdc63449df6ee5e7840b3e58554d7a41068b542 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:27:23 +0000 Subject: e1000e: cleanup defines.h Remove redundant defines which are defined elsewhere. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index d29b2fd..acfe1fa 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -29,25 +29,6 @@ #ifndef _E1000_DEFINES_H_ #define _E1000_DEFINES_H_ -#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ -#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ -#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ -#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ -#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ -#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ -#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ -#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ -#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ -#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ -#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ -#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ - /* Number of Transmit and Receive Descriptors must be a multiple of 8 */ #define REQ_TX_DESCRIPTOR_MULTIPLE 8 #define REQ_RX_DESCRIPTOR_MULTIPLE 8 @@ -86,7 +67,6 @@ #define E1000_CTRL_EXT_EIAME 0x01000000 #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ -#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ #define E1000_CTRL_EXT_LSECCK 0x00001000 #define E1000_CTRL_EXT_PHYPDEN 0x00100000 @@ -546,7 +526,6 @@ #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ #define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ -#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 #define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ #define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ -- cgit v0.10.2 From c063f606fd339676085b55c2ac43d0dd0e10dd7a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:27:53 +0000 Subject: e1000e: cleanup: group OR'ed bit settings with parens For clarity, wrap OR'ed bit settings with parentheses. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index cddfc6b..8dd1da0 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -3106,8 +3106,9 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) msleep(200); /* flush the packets in the fifo buffer */ - ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC | - HV_MUX_DATA_CTRL_FORCE_SPEED); + ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, + (HV_MUX_DATA_CTRL_GEN_TO_MAC | + HV_MUX_DATA_CTRL_FORCE_SPEED)); if (ret_val) return ret_val; -- cgit v0.10.2 From 55c5f55e524cec35b5931df16936118dc6c0837b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:28:24 +0000 Subject: e1000e: cleanup some whitespace and indentation issues Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 3f27546..765211a 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1438,18 +1438,18 @@ static const struct e1000_phy_operations es2_phy_ops = { .acquire = e1000_acquire_phy_80003es2lan, .check_polarity = e1000_check_polarity_m88, .check_reset_block = e1000e_check_reset_block_generic, - .commit = e1000e_phy_sw_reset, - .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan, - .get_cfg_done = e1000_get_cfg_done_80003es2lan, - .get_cable_length = e1000_get_cable_length_80003es2lan, - .get_info = e1000e_get_phy_info_m88, - .read_reg = e1000_read_phy_reg_gg82563_80003es2lan, + .commit = e1000e_phy_sw_reset, + .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan, + .get_cfg_done = e1000_get_cfg_done_80003es2lan, + .get_cable_length = e1000_get_cable_length_80003es2lan, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000_read_phy_reg_gg82563_80003es2lan, .release = e1000_release_phy_80003es2lan, - .reset = e1000e_phy_hw_reset_generic, - .set_d0_lplu_state = NULL, - .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_reg = e1000_write_phy_reg_gg82563_80003es2lan, - .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, + .reset = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = NULL, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_reg = e1000_write_phy_reg_gg82563_80003es2lan, + .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, }; static const struct e1000_nvm_operations es2_nvm_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 076938c..db364b6 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1327,9 +1327,10 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) */ vfta_offset = (hw->mng_cookie.vlan_id >> E1000_VFTA_ENTRY_SHIFT) & - E1000_VFTA_ENTRY_MASK; - vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & - E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = + 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); } break; default: @@ -1931,7 +1932,7 @@ static const struct e1000_phy_operations e82_phy_ops_igp = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_igp, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_phy_operations e82_phy_ops_m88 = { @@ -1949,7 +1950,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_m88, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_phy_operations e82_phy_ops_bm = { @@ -1967,7 +1968,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_bm2, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_nvm_operations e82571_nvm_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index acfe1fa..1257f91 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -96,19 +96,19 @@ /* mask to determine if packets should be dropped due to frame errors */ #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ - E1000_RXD_ERR_CE | \ - E1000_RXD_ERR_SE | \ - E1000_RXD_ERR_SEQ | \ - E1000_RXD_ERR_CXE | \ - E1000_RXD_ERR_RXE) + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ - E1000_RXDEXT_STATERR_CE | \ - E1000_RXDEXT_STATERR_SE | \ - E1000_RXDEXT_STATERR_SEQ | \ - E1000_RXDEXT_STATERR_CXE | \ - E1000_RXDEXT_STATERR_RXE) + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) #define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 @@ -253,14 +253,15 @@ #define ADVERTISE_1000_FULL 0x0020 /* 1000/H is not supported, nor spec-compliant. */ -#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ - ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ - ADVERTISE_1000_FULL) -#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ - ADVERTISE_100_HALF | ADVERTISE_100_FULL) -#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) -#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) -#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) +#define E1000_ALL_SPEED_DUPLEX ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL | ADVERTISE_1000_FULL) +#define E1000_ALL_NOT_GIG ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) #define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX @@ -422,11 +423,11 @@ * o LSC = Link Status Change */ #define IMS_ENABLE_MASK ( \ - E1000_IMS_RXT0 | \ - E1000_IMS_TXDW | \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ | \ - E1000_IMS_LSC) + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 58547b8..2ca6f2f 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4507,7 +4507,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { .reset_hw = e1000_reset_hw_ich8lan, .init_hw = e1000_init_hw_ich8lan, .setup_link = e1000_setup_link_ich8lan, - .setup_physical_interface= e1000_setup_copper_link_ich8lan, + .setup_physical_interface = e1000_setup_copper_link_ich8lan, /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, @@ -4529,7 +4529,7 @@ static const struct e1000_phy_operations ich8_phy_ops = { static const struct e1000_nvm_operations ich8_nvm_ops = { .acquire = e1000_acquire_nvm_ich8lan, - .read = e1000_read_nvm_ich8lan, + .read = e1000_read_nvm_ich8lan, .release = e1000_release_nvm_ich8lan, .reload = e1000e_reload_nvm_generic, .update = e1000_update_nvm_checksum_ich8lan, diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 0709f49..5992eef 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1074,8 +1074,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); if (ret_val) return ret_val; - ret_val = - e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); + ret_val = e1e_rphy(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); if (ret_val) return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 46a38a4..e878dbf 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6571,8 +6571,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } err = pci_request_selected_regions_exclusive(pdev, - pci_select_bars(pdev, IORESOURCE_MEM), - e1000e_driver_name); + pci_select_bars(pdev, IORESOURCE_MEM), + e1000e_driver_name); if (err) goto err_pci_reg; diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index 19c40d6..98da75d 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -53,8 +53,7 @@ MODULE_PARM_DESC(copybreak, */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } #define E1000_PARAM(X, desc) \ - static int X[E1000_MAX_NIC+1] \ - = E1000_PARAM_INIT; \ + static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ static unsigned int num_##X; \ module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); -- cgit v0.10.2 From 9e019901816ca4bad83bf4922b791610e6dd529e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Sat, 12 Jan 2013 07:28:54 +0000 Subject: e1000e: update driver version string Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e878dbf..3bb7b01 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -56,7 +56,7 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "2.1.4" DRV_EXTRAVERSION +#define DRV_VERSION "2.2.14" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; -- cgit v0.10.2 From 8bb628697fb05172f10a0960385b8369be15cb6c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 16 Jan 2013 08:46:49 +0000 Subject: e1000e: resolve -Wunused-parameter compile warnings Remove the unused parameter when possible, otherwise use __always_unused attribute. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 58df18c..b144778 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -418,7 +418,7 @@ static void e1000_set_msglevel(struct net_device *netdev, u32 data) adapter->msg_enable = data; } -static int e1000_get_regs_len(struct net_device *netdev) +static int e1000_get_regs_len(struct net_device __always_unused *netdev) { #define E1000_REGS_LEN 32 /* overestimate */ return E1000_REGS_LEN * sizeof(u32); @@ -934,7 +934,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) return *data; } -static irqreturn_t e1000_test_intr(int irq, void *data) +static irqreturn_t e1000_test_intr(int __always_unused irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1705,7 +1705,8 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) return *data; } -static int e1000e_get_sset_count(struct net_device *netdev, int sset) +static int e1000e_get_sset_count(struct net_device __always_unused *netdev, + int sset) { switch (sset) { case ETH_SS_TEST: @@ -1968,7 +1969,7 @@ static int e1000_nway_reset(struct net_device *netdev) } static void e1000_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, + struct ethtool_stats __always_unused *stats, u64 *data) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1997,8 +1998,8 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, } } -static void e1000_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) +static void e1000_get_strings(struct net_device __always_unused *netdev, + u32 stringset, u8 *data) { u8 *p = data; int i; @@ -2018,7 +2019,8 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset, } static int e1000_get_rxnfc(struct net_device *netdev, - struct ethtool_rxnfc *info, u32 *rule_locs) + struct ethtool_rxnfc *info, + u32 __always_unused *rule_locs) { info->data = 0; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 2ca6f2f..5ca21f9 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1082,7 +1082,7 @@ static DEFINE_MUTEX(nvm_mutex); * * Acquires the mutex for performing NVM operations. **/ -static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_lock(&nvm_mutex); @@ -1095,7 +1095,7 @@ static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) * * Releases the mutex used while performing NVM operations. **/ -static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +static void e1000_release_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_unlock(&nvm_mutex); } diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 5992eef..7365288 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1356,8 +1356,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, * Sets the speed and duplex to gigabit full duplex (the only possible option) * for fiber/serdes links. **/ -s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, - u16 *duplex) +s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw __always_unused + *hw, u16 *speed, u16 *duplex) { *speed = SPEED_1000; *duplex = FULL_DUPLEX; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 3bb7b01..eb01a55 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1747,7 +1747,7 @@ static void e1000e_downshift_workaround(struct work_struct *work) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr_msi(int irq, void *data) +static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1813,7 +1813,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr(int irq, void *data) +static irqreturn_t e1000_intr(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1888,7 +1888,7 @@ static irqreturn_t e1000_intr(int irq, void *data) return IRQ_HANDLED; } -static irqreturn_t e1000_msix_other(int irq, void *data) +static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1920,8 +1920,7 @@ no_link_interrupt: return IRQ_HANDLED; } - -static irqreturn_t e1000_intr_msix_tx(int irq, void *data) +static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1939,7 +1938,7 @@ static irqreturn_t e1000_intr_msix_tx(int irq, void *data) return IRQ_HANDLED; } -static irqreturn_t e1000_intr_msix_rx(int irq, void *data) +static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -2496,9 +2495,7 @@ void e1000e_free_rx_resources(struct e1000_ring *rx_ring) * while increasing bulk throughput. This functionality is controlled * by the InterruptThrottleRate module parameter. **/ -static unsigned int e1000_update_itr(struct e1000_adapter *adapter, - u16 itr_setting, int packets, - int bytes) +static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) { unsigned int retval = itr_setting; @@ -2558,18 +2555,16 @@ static void e1000_set_itr(struct e1000_adapter *adapter) goto set_itr_now; } - adapter->tx_itr = e1000_update_itr(adapter, - adapter->tx_itr, - adapter->total_tx_packets, - adapter->total_tx_bytes); + adapter->tx_itr = e1000_update_itr(adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) adapter->tx_itr = low_latency; - adapter->rx_itr = e1000_update_itr(adapter, - adapter->rx_itr, - adapter->total_rx_packets, - adapter->total_rx_bytes); + adapter->rx_itr = e1000_update_itr(adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) adapter->rx_itr = low_latency; @@ -4115,7 +4110,7 @@ static int e1000_sw_init(struct e1000_adapter *adapter) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr_msi_test(int irq, void *data) +static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -6249,7 +6244,7 @@ static void e1000_shutdown(struct pci_dev *pdev) #ifdef CONFIG_NET_POLL_CONTROLLER -static irqreturn_t e1000_intr_msix(int irq, void *data) +static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 8dd1da0..6f32811 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2178,7 +2178,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) * Generic function to wait 10 milli-seconds for configuration to complete * and return success. **/ -s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw) +s32 e1000e_get_cfg_done_generic(struct e1000_hw __always_unused *hw) { mdelay(10); diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index 6b8df65..b477fa5 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -165,8 +165,9 @@ static int e1000e_phc_settime(struct ptp_clock_info *ptp, * Enable (or disable) ancillary features of the PHC subsystem. * Currently, no ancillary features are supported. **/ -static int e1000e_phc_enable(struct ptp_clock_info *ptp, - struct ptp_clock_request *request, int on) +static int e1000e_phc_enable(struct ptp_clock_info __always_unused *ptp, + struct ptp_clock_request __always_unused *request, + int __always_unused on) { return -EOPNOTSUPP; } -- cgit v0.10.2 From c2ade1a41d69b8b734dd9947bf7ec25bb2fd2f33 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 16 Jan 2013 08:54:35 +0000 Subject: e1000e: use generic IEEE MII definitions For standard IEEE MII-compatible transceivers, the kernel has generic register and bit definitions. Use those instead of redundant local defines. Do not replace references of MII_CR_SPEED_10 with BMCR_SPEED10 (0x0000) when it is not necessary (i.e. when it is bitwise OR'ed with another value). Some whitespace issues in the surrounding context of the above changes are also cleaned up. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 765211a..a00457a 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -624,16 +624,16 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) e_dbg("GG82563 PSCR: %X\n", phy_data); - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); /* Reset the phy to commit changes. */ - phy_data |= MII_CR_RESET; + phy_data |= BMCR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index db364b6..cf86090 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -447,13 +447,13 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) break; case e1000_82574: case e1000_82583: - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 1257f91..615b900 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -563,66 +563,6 @@ E1000_GCR_TXDSCW_NO_SNOOP | \ E1000_GCR_TXDSCR_NO_SNOOP) -/* PHY Control Register */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ - -/* Autoneg Advertisement Register */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ - -/* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ - -/* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ - -/* 1000BASE-T Control Register */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ - /* 0=DTE device */ -#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ - /* 0=Configure PHY as Slave */ -#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ - /* 0=Automatic Master/Slave config */ - -/* 1000BASE-T Status Register */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ - - -/* PHY 1000 MII Register/Bit Definitions */ -/* PHY Registers defined by IEEE */ -#define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Register */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ - /* NVM Control */ #define E1000_EECD_SK 0x00000001 /* NVM Clock */ #define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index c7d5c5b..4b0bd9c 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -45,6 +45,7 @@ #include #include #include +#include #include "hw.h" struct e1000_info; diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index b144778..c6c3e92 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -472,10 +472,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = 0; /* was idle_errors */ - e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); - regs_buff[24] = (u32)phy_data; /* phy local receiver status */ - regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + regs_buff[21] = 0; /* was idle_errors */ + e1e_rphy(hw, MII_STAT1000, &phy_data); + regs_buff[24] = (u32)phy_data; /* phy local receiver status */ + regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -1284,7 +1284,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) if (hw->phy.type == e1000_phy_ife) { /* force 100, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x6100); + e1e_wphy(hw, MII_BMCR, 0x6100); /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg = er32(CTRL); @@ -1307,9 +1307,9 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Auto-MDI/MDIX Off */ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); /* reset to update Auto-MDI/MDIX */ - e1e_wphy(hw, PHY_CONTROL, 0x9140); + e1e_wphy(hw, MII_BMCR, 0x9140); /* autoneg off */ - e1e_wphy(hw, PHY_CONTROL, 0x8140); + e1e_wphy(hw, MII_BMCR, 0x8140); break; case e1000_phy_gg82563: e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); @@ -1363,7 +1363,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) } /* force 1000, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x4140); + e1e_wphy(hw, MII_BMCR, 0x4140); mdelay(250); /* Now set up the MAC to the same speed/duplex as the PHY. */ @@ -1538,10 +1538,10 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->mac.autoneg = 1; if (hw->phy.type == e1000_phy_gg82563) e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); - e1e_rphy(hw, PHY_CONTROL, &phy_reg); - if (phy_reg & MII_CR_LOOPBACK) { - phy_reg &= ~MII_CR_LOOPBACK; - e1e_wphy(hw, PHY_CONTROL, phy_reg); + e1e_rphy(hw, MII_BMCR, &phy_reg); + if (phy_reg & BMCR_LOOPBACK) { + phy_reg &= ~BMCR_LOOPBACK; + e1e_wphy(hw, MII_BMCR, phy_reg); if (hw->phy.ops.commit) hw->phy.ops.commit(hw); } diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 5ca21f9..a019b46 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -312,12 +312,12 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) u16 retry_count; for (retry_count = 0; retry_count < 2; retry_count++) { - ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) continue; phy_id = (u32)(phy_reg << 16); - ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) { phy_id = 0; continue; @@ -882,8 +882,8 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { - e1e_rphy_locked(hw, PHY_LP_ABILITY, &data); - if (data & NWAY_LPAR_100TX_FD_CAPS) + e1e_rphy_locked(hw, MII_LPA, &data); + if (data & LPA_100FULL) lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; else /* EEE is not supported in 100Half, so ignore @@ -1792,7 +1792,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) */ if (hw->phy.revision < 2) { e1000e_phy_sw_reset(hw); - ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); + ret_val = e1e_wphy(hw, MII_BMCR, 0x3140); } } diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 7365288..b78e021 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1053,14 +1053,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * has completed. We read this twice because this reg has * some "sticky" (latched) bits. */ - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); + ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); + ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg); if (ret_val) return ret_val; - if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + if (!(mii_status_reg & BMSR_ANEGCOMPLETE)) { e_dbg("Copper PHY and Auto Neg has not completed.\n"); return ret_val; } @@ -1071,11 +1071,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * Page Ability Register (Address 5) to determine how * flow control was negotiated. */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); + ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_nway_adv_reg); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_LP_ABILITY, - &mii_nway_lp_ability_reg); + ret_val = e1e_rphy(hw, MII_LPA, &mii_nway_lp_ability_reg); if (ret_val) return ret_val; @@ -1112,8 +1111,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * 1 | DC | 1 | DC | E1000_fc_full * */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_CAP)) { /* Now we need to check if the user selected Rx ONLY * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise Rx @@ -1135,10 +1134,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) *-------|---------|-------|---------|-------------------- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if (!(mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) && + (mii_nway_lp_ability_reg & LPA_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) { hw->fc.current_mode = e1000_fc_tx_pause; e_dbg("Flow Control = Tx PAUSE frames only.\n"); } @@ -1149,10 +1148,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) *-------|---------|-------|---------|-------------------- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) && + !(mii_nway_lp_ability_reg & LPA_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) { hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = Rx PAUSE frames only.\n"); } else { diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index eb01a55..e0eb5dd 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include @@ -1117,9 +1116,9 @@ static void e1000_print_hw_hang(struct work_struct *work) adapter->tx_hang_recheck = false; netif_stop_queue(netdev); - e1e_rphy(hw, PHY_STATUS, &phy_status); - e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); - e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); + e1e_rphy(hw, MII_BMSR, &phy_status); + e1e_rphy(hw, MII_STAT1000, &phy_1000t_status); + e1e_rphy(hw, MII_ESTATUS, &phy_ext_status); pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); @@ -4677,14 +4676,14 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); - ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); - ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); - ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); - ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); - ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); + ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); + ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); + ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); + ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa); + ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion); + ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000); + ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000); + ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); } else { @@ -4856,9 +4855,9 @@ static void e1000_watchdog_task(struct work_struct *work) (adapter->link_duplex == HALF_DUPLEX)) { u16 autoneg_exp; - e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); + e1e_rphy(hw, MII_EXPANSION, &autoneg_exp); - if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) + if (!(autoneg_exp & EXPANSION_NWAY)) e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n"); } diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 6f32811..ae656f1 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -131,13 +131,13 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) return 0; while (retry_count < 2) { - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -641,31 +641,31 @@ static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) u16 phy_data; /* Resolve Master/Slave mode */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &phy_data); + ret_val = e1e_rphy(hw, MII_CTRL1000, &phy_data); if (ret_val) return ret_val; /* load defaults for future use */ - hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? + hw->phy.original_ms_type = (phy_data & CTL1000_ENABLE_MASTER) ? + ((phy_data & CTL1000_AS_MASTER) ? e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto; switch (hw->phy.ms_type) { case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + phy_data |= (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); break; case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); + phy_data |= CTL1000_ENABLE_MASTER; + phy_data &= ~(CTL1000_AS_MASTER); break; case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; + phy_data &= ~CTL1000_ENABLE_MASTER; /* fall-through */ default: break; } - return e1e_wphy(hw, PHY_1000T_CTRL, phy_data); + return e1e_wphy(hw, MII_CTRL1000, phy_data); } /** @@ -943,12 +943,12 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) return ret_val; /* Set auto Master/Slave resolution process */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data); + ret_val = e1e_rphy(hw, MII_CTRL1000, &data); if (ret_val) return ret_val; - data &= ~CR_1000T_MS_ENABLE; - ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data); + data &= ~CTL1000_ENABLE_MASTER; + ret_val = e1e_wphy(hw, MII_CTRL1000, data); if (ret_val) return ret_val; } @@ -978,13 +978,13 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) phy->autoneg_advertised &= phy->autoneg_mask; /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_autoneg_adv_reg); if (ret_val) return ret_val; if (phy->autoneg_mask & ADVERTISE_1000_FULL) { /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + ret_val = e1e_rphy(hw, MII_CTRL1000, &mii_1000t_ctrl_reg); if (ret_val) return ret_val; } @@ -1000,36 +1000,35 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T Control Register (Address 9). */ - mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | - NWAY_AR_100TX_HD_CAPS | - NWAY_AR_10T_FD_CAPS | - NWAY_AR_10T_HD_CAPS); - mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + mii_autoneg_adv_reg &= ~(ADVERTISE_100FULL | + ADVERTISE_100HALF | + ADVERTISE_10FULL | ADVERTISE_10HALF); + mii_1000t_ctrl_reg &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { e_dbg("Advertise 10mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10HALF; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { e_dbg("Advertise 10mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10FULL; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { e_dbg("Advertise 100mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100HALF; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { e_dbg("Advertise 100mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100FULL; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ @@ -1039,14 +1038,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { e_dbg("Advertise 1000mb Full duplex\n"); - mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + mii_1000t_ctrl_reg |= ADVERTISE_1000FULL; } /* Check for a software override of the flow control settings, and * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * Advertisement Register (MII_ADVERTISE) and re-start auto- * negotiation. * * The possible values of the "fc" parameter are: @@ -1064,7 +1063,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Flow control (Rx & Tx) is completely disabled by a * software over-ride. */ - mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg &= + ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; case e1000_fc_rx_pause: /* Rx Flow control is enabled, and Tx Flow control is @@ -1076,34 +1076,36 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * (in e1000e_config_fc_after_link_up) we will disable the * hw's ability to send PAUSE frames. */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg |= + (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; case e1000_fc_tx_pause: /* Tx Flow control is enabled, and Rx Flow control is * disabled, by a software over-ride. */ - mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; - mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM; + mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP; break; case e1000_fc_full: /* Flow control (both Rx and Tx) is enabled by a software * over-ride. */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg |= + (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; default: e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; } - ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + ret_val = e1e_wphy(hw, MII_ADVERTISE, mii_autoneg_adv_reg); if (ret_val) return ret_val; e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) - ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + ret_val = e1e_wphy(hw, MII_CTRL1000, mii_1000t_ctrl_reg); return ret_val; } @@ -1145,12 +1147,12 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) /* Restart auto-negotiation by setting the Auto Neg Enable bit and * the Auto Neg Restart bit in the PHY control register. */ - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl); if (ret_val) return ret_val; - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); + phy_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART); + ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl); if (ret_val) return ret_val; @@ -1237,13 +1239,13 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -1315,13 +1317,13 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) e_dbg("M88E1000 PSCR: %X\n", phy_data); - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -1408,13 +1410,13 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) u16 data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &data); + ret_val = e1e_rphy(hw, MII_BMCR, &data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &data); - ret_val = e1e_wphy(hw, PHY_CONTROL, data); + ret_val = e1e_wphy(hw, MII_BMCR, data); if (ret_val) return ret_val; @@ -1458,13 +1460,13 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) /** * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure - * @phy_ctrl: pointer to current value of PHY_CONTROL + * @phy_ctrl: pointer to current value of MII_BMCR * * Forces speed and duplex on the PHY by doing the following: disable flow * control, force speed/duplex on the MAC, disable auto speed detection, * disable auto-negotiation, configure duplex, configure speed, configure * the collision distance, write configuration to CTRL register. The - * caller must write to the PHY_CONTROL register for these settings to + * caller must write to the MII_BMCR register for these settings to * take affect. **/ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) @@ -1484,29 +1486,28 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl &= ~E1000_CTRL_ASDE; /* Disable autoneg on the phy */ - *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + *phy_ctrl &= ~BMCR_ANENABLE; /* Forcing Full or Half Duplex? */ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; - *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + *phy_ctrl &= ~BMCR_FULLDPLX; e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; - *phy_ctrl |= MII_CR_FULL_DUPLEX; + *phy_ctrl |= BMCR_FULLDPLX; e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { ctrl |= E1000_CTRL_SPD_100; - *phy_ctrl |= MII_CR_SPEED_100; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + *phy_ctrl |= BMCR_SPEED100; + *phy_ctrl &= ~BMCR_SPEED1000; e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - *phy_ctrl |= MII_CR_SPEED_10; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + *phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100); e_dbg("Forcing 10mb\n"); } @@ -1747,13 +1748,13 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & MII_SR_AUTONEG_COMPLETE) + if (phy_status & BMSR_ANEGCOMPLETE) break; msleep(100); } @@ -1780,21 +1781,21 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u16 i, phy_status; for (i = 0; i < iterations; i++) { - /* Some PHYs require the PHY_STATUS register to be read + /* Some PHYs require the MII_BMSR register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ udelay(usec_interval); - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & MII_SR_LINK_STATUS) + if (phy_status & BMSR_LSTATUS) break; if (usec_interval >= 1000) mdelay(usec_interval/1000); @@ -1968,17 +1969,15 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); + ret_val = e1e_rphy(hw, MII_STAT1000, &phy_data); if (ret_val) return ret_val; - phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (phy_data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (phy_data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { /* Set values to "undefined" */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; @@ -2032,17 +2031,15 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, MII_STAT1000, &data); if (ret_val) return ret_val; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; @@ -2116,12 +2113,12 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) s32 ret_val; u16 phy_ctrl; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl); if (ret_val) return ret_val; - phy_ctrl |= MII_CR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); + phy_ctrl |= BMCR_RESET; + ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl); if (ret_val) return ret_val; @@ -2751,9 +2748,9 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw) u16 mii_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); + e1e_rphy(hw, MII_BMCR, &mii_reg); + mii_reg &= ~BMCR_PDOWN; + e1e_wphy(hw, MII_BMCR, mii_reg); } /** @@ -2769,9 +2766,9 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw) u16 mii_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); + e1e_rphy(hw, MII_BMCR, &mii_reg); + mii_reg |= BMCR_PDOWN; + e1e_wphy(hw, MII_BMCR, mii_reg); usleep_range(1000, 2000); } @@ -3087,8 +3084,8 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) return 0; /* Do not apply workaround if in PHY loopback bit 14 set */ - e1e_rphy(hw, PHY_CONTROL, &data); - if (data & PHY_CONTROL_LB) + e1e_rphy(hw, MII_BMCR, &data); + if (data & BMCR_LOOPBACK) return 0; /* check if link is up and at 1Gbps */ @@ -3152,13 +3149,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -3226,17 +3223,15 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, MII_STAT1000, &data); if (ret_val) return ret_val; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; -- cgit v0.10.2 From 7e50f84c94b82c3b2d23ac8878012b3b60ea0e96 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 31 Jan 2013 12:40:38 +0200 Subject: pf_key/xfrm_algo: prepare pf_key and xfrm_algo for new algorithms without pfkey support Mark existing algorithms as pfkey supported and make pfkey only use algorithms that have pfkey_supported set. Signed-off-by: Jussi Kivilinna Signed-off-by: Steffen Klassert diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 421f764..814a1ba 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1320,6 +1320,7 @@ struct xfrm_algo_desc { char *name; char *compat; u8 available:1; + u8 pfkey_supported:1; union { struct xfrm_algo_aead_info aead; struct xfrm_algo_auth_info auth; @@ -1561,8 +1562,8 @@ extern void xfrm_input_init(void); extern int xfrm_parse_spi(struct sk_buff *skb, u8 nexthdr, __be32 *spi, __be32 *seq); extern void xfrm_probe_algs(void); -extern int xfrm_count_auth_supported(void); -extern int xfrm_count_enc_supported(void); +extern int xfrm_count_pfkey_auth_supported(void); +extern int xfrm_count_pfkey_enc_supported(void); extern struct xfrm_algo_desc *xfrm_aalg_get_byidx(unsigned int idx); extern struct xfrm_algo_desc *xfrm_ealg_get_byidx(unsigned int idx); extern struct xfrm_algo_desc *xfrm_aalg_get_byid(int alg_id); diff --git a/net/key/af_key.c b/net/key/af_key.c index 6a6e684..cb75f9b 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -815,18 +815,21 @@ static struct sk_buff *__pfkey_xfrm_state2msg(const struct xfrm_state *x, sa->sadb_sa_auth = 0; if (x->aalg) { struct xfrm_algo_desc *a = xfrm_aalg_get_byname(x->aalg->alg_name, 0); - sa->sadb_sa_auth = a ? a->desc.sadb_alg_id : 0; + sa->sadb_sa_auth = (a && a->pfkey_supported) ? + a->desc.sadb_alg_id : 0; } sa->sadb_sa_encrypt = 0; BUG_ON(x->ealg && x->calg); if (x->ealg) { struct xfrm_algo_desc *a = xfrm_ealg_get_byname(x->ealg->alg_name, 0); - sa->sadb_sa_encrypt = a ? a->desc.sadb_alg_id : 0; + sa->sadb_sa_encrypt = (a && a->pfkey_supported) ? + a->desc.sadb_alg_id : 0; } /* KAME compatible: sadb_sa_encrypt is overloaded with calg id */ if (x->calg) { struct xfrm_algo_desc *a = xfrm_calg_get_byname(x->calg->alg_name, 0); - sa->sadb_sa_encrypt = a ? a->desc.sadb_alg_id : 0; + sa->sadb_sa_encrypt = (a && a->pfkey_supported) ? + a->desc.sadb_alg_id : 0; } sa->sadb_sa_flags = 0; @@ -1137,7 +1140,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, if (sa->sadb_sa_auth) { int keysize = 0; struct xfrm_algo_desc *a = xfrm_aalg_get_byid(sa->sadb_sa_auth); - if (!a) { + if (!a || !a->pfkey_supported) { err = -ENOSYS; goto out; } @@ -1159,7 +1162,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, if (sa->sadb_sa_encrypt) { if (hdr->sadb_msg_satype == SADB_X_SATYPE_IPCOMP) { struct xfrm_algo_desc *a = xfrm_calg_get_byid(sa->sadb_sa_encrypt); - if (!a) { + if (!a || !a->pfkey_supported) { err = -ENOSYS; goto out; } @@ -1171,7 +1174,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, } else { int keysize = 0; struct xfrm_algo_desc *a = xfrm_ealg_get_byid(sa->sadb_sa_encrypt); - if (!a) { + if (!a || !a->pfkey_supported) { err = -ENOSYS; goto out; } @@ -1577,13 +1580,13 @@ static struct sk_buff *compose_sadb_supported(const struct sadb_msg *orig, struct sadb_msg *hdr; int len, auth_len, enc_len, i; - auth_len = xfrm_count_auth_supported(); + auth_len = xfrm_count_pfkey_auth_supported(); if (auth_len) { auth_len *= sizeof(struct sadb_alg); auth_len += sizeof(struct sadb_supported); } - enc_len = xfrm_count_enc_supported(); + enc_len = xfrm_count_pfkey_enc_supported(); if (enc_len) { enc_len *= sizeof(struct sadb_alg); enc_len += sizeof(struct sadb_supported); @@ -1614,6 +1617,8 @@ static struct sk_buff *compose_sadb_supported(const struct sadb_msg *orig, struct xfrm_algo_desc *aalg = xfrm_aalg_get_byidx(i); if (!aalg) break; + if (!aalg->pfkey_supported) + continue; if (aalg->available) *ap++ = aalg->desc; } @@ -1633,6 +1638,8 @@ static struct sk_buff *compose_sadb_supported(const struct sadb_msg *orig, struct xfrm_algo_desc *ealg = xfrm_ealg_get_byidx(i); if (!ealg) break; + if (!ealg->pfkey_supported) + continue; if (ealg->available) *ap++ = ealg->desc; } @@ -2824,6 +2831,8 @@ static int count_ah_combs(const struct xfrm_tmpl *t) const struct xfrm_algo_desc *aalg = xfrm_aalg_get_byidx(i); if (!aalg) break; + if (!aalg->pfkey_supported) + continue; if (aalg_tmpl_set(t, aalg) && aalg->available) sz += sizeof(struct sadb_comb); } @@ -2839,6 +2848,9 @@ static int count_esp_combs(const struct xfrm_tmpl *t) if (!ealg) break; + if (!ealg->pfkey_supported) + continue; + if (!(ealg_tmpl_set(t, ealg) && ealg->available)) continue; @@ -2847,6 +2859,9 @@ static int count_esp_combs(const struct xfrm_tmpl *t) if (!aalg) break; + if (!aalg->pfkey_supported) + continue; + if (aalg_tmpl_set(t, aalg) && aalg->available) sz += sizeof(struct sadb_comb); } @@ -2870,6 +2885,9 @@ static void dump_ah_combs(struct sk_buff *skb, const struct xfrm_tmpl *t) if (!aalg) break; + if (!aalg->pfkey_supported) + continue; + if (aalg_tmpl_set(t, aalg) && aalg->available) { struct sadb_comb *c; c = (struct sadb_comb*)skb_put(skb, sizeof(struct sadb_comb)); @@ -2902,6 +2920,9 @@ static void dump_esp_combs(struct sk_buff *skb, const struct xfrm_tmpl *t) if (!ealg) break; + if (!ealg->pfkey_supported) + continue; + if (!(ealg_tmpl_set(t, ealg) && ealg->available)) continue; @@ -2910,6 +2931,8 @@ static void dump_esp_combs(struct sk_buff *skb, const struct xfrm_tmpl *t) const struct xfrm_algo_desc *aalg = xfrm_aalg_get_byidx(k); if (!aalg) break; + if (!aalg->pfkey_supported) + continue; if (!(aalg_tmpl_set(t, aalg) && aalg->available)) continue; c = (struct sadb_comb*)skb_put(skb, sizeof(struct sadb_comb)); diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c index f9a5495..6fb9d00 100644 --- a/net/xfrm/xfrm_algo.c +++ b/net/xfrm/xfrm_algo.c @@ -35,6 +35,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AES_GCM_ICV8, .sadb_alg_ivlen = 8, @@ -51,6 +53,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AES_GCM_ICV12, .sadb_alg_ivlen = 8, @@ -67,6 +71,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AES_GCM_ICV16, .sadb_alg_ivlen = 8, @@ -83,6 +89,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AES_CCM_ICV8, .sadb_alg_ivlen = 8, @@ -99,6 +107,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AES_CCM_ICV12, .sadb_alg_ivlen = 8, @@ -115,6 +125,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AES_CCM_ICV16, .sadb_alg_ivlen = 8, @@ -131,6 +143,8 @@ static struct xfrm_algo_desc aead_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_NULL_AES_GMAC, .sadb_alg_ivlen = 8, @@ -151,6 +165,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_AALG_NULL, .sadb_alg_ivlen = 0, @@ -169,6 +185,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_AALG_MD5HMAC, .sadb_alg_ivlen = 0, @@ -187,6 +205,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_AALG_SHA1HMAC, .sadb_alg_ivlen = 0, @@ -205,6 +225,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_AALG_SHA2_256HMAC, .sadb_alg_ivlen = 0, @@ -222,6 +244,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_AALG_SHA2_384HMAC, .sadb_alg_ivlen = 0, @@ -239,6 +263,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_AALG_SHA2_512HMAC, .sadb_alg_ivlen = 0, @@ -257,6 +283,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_AALG_RIPEMD160HMAC, .sadb_alg_ivlen = 0, @@ -274,6 +302,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_AALG_AES_XCBC_MAC, .sadb_alg_ivlen = 0, @@ -295,6 +325,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_EALG_NULL, .sadb_alg_ivlen = 0, @@ -313,6 +345,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_EALG_DESCBC, .sadb_alg_ivlen = 8, @@ -331,6 +365,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_EALG_3DESCBC, .sadb_alg_ivlen = 8, @@ -349,6 +385,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_CASTCBC, .sadb_alg_ivlen = 8, @@ -367,6 +405,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_BLOWFISHCBC, .sadb_alg_ivlen = 8, @@ -385,6 +425,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AESCBC, .sadb_alg_ivlen = 8, @@ -403,6 +445,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_SERPENTCBC, .sadb_alg_ivlen = 8, @@ -421,6 +465,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_CAMELLIACBC, .sadb_alg_ivlen = 8, @@ -439,6 +485,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_TWOFISHCBC, .sadb_alg_ivlen = 8, @@ -456,6 +504,8 @@ static struct xfrm_algo_desc ealg_list[] = { } }, + .pfkey_supported = 1, + .desc = { .sadb_alg_id = SADB_X_EALG_AESCTR, .sadb_alg_ivlen = 8, @@ -473,6 +523,7 @@ static struct xfrm_algo_desc calg_list[] = { .threshold = 90, } }, + .pfkey_supported = 1, .desc = { .sadb_alg_id = SADB_X_CALG_DEFLATE } }, { @@ -482,6 +533,7 @@ static struct xfrm_algo_desc calg_list[] = { .threshold = 90, } }, + .pfkey_supported = 1, .desc = { .sadb_alg_id = SADB_X_CALG_LZS } }, { @@ -491,6 +543,7 @@ static struct xfrm_algo_desc calg_list[] = { .threshold = 50, } }, + .pfkey_supported = 1, .desc = { .sadb_alg_id = SADB_X_CALG_LZJH } }, }; @@ -714,27 +767,27 @@ void xfrm_probe_algs(void) } EXPORT_SYMBOL_GPL(xfrm_probe_algs); -int xfrm_count_auth_supported(void) +int xfrm_count_pfkey_auth_supported(void) { int i, n; for (i = 0, n = 0; i < aalg_entries(); i++) - if (aalg_list[i].available) + if (aalg_list[i].available && aalg_list[i].pfkey_supported) n++; return n; } -EXPORT_SYMBOL_GPL(xfrm_count_auth_supported); +EXPORT_SYMBOL_GPL(xfrm_count_pfkey_auth_supported); -int xfrm_count_enc_supported(void) +int xfrm_count_pfkey_enc_supported(void) { int i, n; for (i = 0, n = 0; i < ealg_entries(); i++) - if (ealg_list[i].available) + if (ealg_list[i].available && ealg_list[i].pfkey_supported) n++; return n; } -EXPORT_SYMBOL_GPL(xfrm_count_enc_supported); +EXPORT_SYMBOL_GPL(xfrm_count_pfkey_enc_supported); #if defined(CONFIG_INET_ESP) || defined(CONFIG_INET_ESP_MODULE) || defined(CONFIG_INET6_ESP) || defined(CONFIG_INET6_ESP_MODULE) -- cgit v0.10.2 From fa8599db8f222fd9d351a640074377a841979187 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 1 Feb 2013 13:17:16 +0800 Subject: xfrm: fix a unbalanced lock Signed-off-by: Li RongQing Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index 3670526..bcfda89 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -64,7 +64,7 @@ static int xfrm_output_one(struct sk_buff *skb, int err) if (unlikely(x->km.state != XFRM_STATE_VALID)) { XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEINVALID); - goto error_nolock; + goto error; } err = xfrm_state_check_expire(x); -- cgit v0.10.2 From 8ca151b568b67a7b72dcfc6ee6ea7c107ddd795c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 14:25:36 +0100 Subject: iwlwifi: add the MVM driver Newer firmware revisions have a completely new firmware API. This is the new driver for this new API. I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Cc: Alexander Bondar Cc: Amit Beka Cc: Amnon Paz Cc: Assaf Krauss Cc: David Spinadel Cc: Dor Shaish Cc: Emmanuel Grumbach Cc: Eytan Lifshitz Cc: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 5cf4323..ba319cb 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -43,8 +43,20 @@ config IWLWIFI module will be called iwlwifi. config IWLDVM - tristate "Intel Wireless WiFi" + tristate "Intel Wireless WiFi DVM Firmware support" depends on IWLWIFI + help + This is the driver supporting the DVM firmware which is + currently the only firmware available for existing devices. + +config IWLMVM + tristate "Intel Wireless WiFi MVM Firmware support" + depends on IWLWIFI + help + This is the driver supporting the MVM firmware which is + currently only available for 7000 series devices. + + Say yes if you have such a device. menu "Debugging Options" depends on IWLWIFI diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 2d4d47a..6c78000 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -17,5 +17,6 @@ ccflags-y += -D__CHECK_ENDIAN__ -I$(src) obj-$(CONFIG_IWLDVM) += dvm/ +obj-$(CONFIG_IWLMVM) += mvm/ CFLAGS_iwl-devtrace.o := -I$(src) diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index b59ec4c..8cf5db7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -116,6 +116,7 @@ do { \ #define IWL_DL_HCMD 0x00000004 #define IWL_DL_STATE 0x00000008 /* 0x000000F0 - 0x00000010 */ +#define IWL_DL_TE 0x00000020 #define IWL_DL_EEPROM 0x00000040 #define IWL_DL_RADIO 0x00000080 /* 0x00000F00 - 0x00000100 */ @@ -156,6 +157,7 @@ do { \ #define IWL_DEBUG_LED(p, f, a...) IWL_DEBUG(p, IWL_DL_LED, f, ## a) #define IWL_DEBUG_WEP(p, f, a...) IWL_DEBUG(p, IWL_DL_WEP, f, ## a) #define IWL_DEBUG_HC(p, f, a...) IWL_DEBUG(p, IWL_DL_HCMD, f, ## a) +#define IWL_DEBUG_TE(p, f, a...) IWL_DEBUG(p, IWL_DL_TE, f, ## a) #define IWL_DEBUG_EEPROM(d, f, a...) IWL_DEBUG_DEV(d, IWL_DL_EEPROM, f, ## a) #define IWL_DEBUG_CALIB(p, f, a...) IWL_DEBUG(p, IWL_DL_CALIB, f, ## a) #define IWL_DEBUG_FW(p, f, a...) IWL_DEBUG(p, IWL_DL_FW, f, ## a) diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index c675196..6f228bb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -139,8 +139,10 @@ struct iwl_drv { #endif }; -#define DVM_OP_MODE 0 -#define MVM_OP_MODE 1 +enum { + DVM_OP_MODE = 0, + MVM_OP_MODE = 1, +}; /* Protects the table contents, i.e. the ops pointer & drv list */ static struct mutex iwlwifi_opmode_table_mtx; @@ -149,8 +151,8 @@ static struct iwlwifi_opmode_table { const struct iwl_op_mode_ops *ops; /* pointer to op_mode ops */ struct list_head drv; /* list of devices using this op_mode */ } iwlwifi_opmode_table[] = { /* ops set when driver is initialized */ - { .name = "iwldvm", .ops = NULL }, - { .name = "iwlmvm", .ops = NULL }, + [DVM_OP_MODE] = { .name = "iwldvm", .ops = NULL }, + [MVM_OP_MODE] = { .name = "iwlmvm", .ops = NULL }, }; /* @@ -963,7 +965,10 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) release_firmware(ucode_raw); mutex_lock(&iwlwifi_opmode_table_mtx); - op = &iwlwifi_opmode_table[DVM_OP_MODE]; + if (fw->mvm_fw) + op = &iwlwifi_opmode_table[MVM_OP_MODE]; + else + op = &iwlwifi_opmode_table[DVM_OP_MODE]; /* add this device to the list of devices using this op_mode */ list_add_tail(&drv->list, &op->drv); diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 1ad31a9..de3c24a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -166,6 +166,7 @@ struct iwl_tlv_calib_ctrl { * @inst_evtlog_ptr: event log offset for runtime ucode. * @inst_evtlog_size: event log size for runtime ucode. * @inst_errlog_ptr: error log offfset for runtime ucode. + * @mvm_fw: indicates this is MVM firmware */ struct iwl_fw { u32 ucode_ver; diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile new file mode 100644 index 0000000..807b250 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_IWLMVM) += iwlmvm.o +iwlmvm-y += fw.o mac80211.o nvm.o ops.o phy-ctxt.o mac-ctxt.o +iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o +iwlmvm-y += scan.o time-event.o rs.o +iwlmvm-y += power.o +iwlmvm-y += led.o +iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o +iwlmvm-$(CONFIG_PM_SLEEP) += d3.o + +ccflags-y += -D__CHECK_ENDIAN__ -I$(src)/../ diff --git a/drivers/net/wireless/iwlwifi/mvm/binding.c b/drivers/net/wireless/iwlwifi/mvm/binding.c new file mode 100644 index 0000000..73d24aa --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/binding.c @@ -0,0 +1,197 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include "fw-api.h" +#include "mvm.h" + +struct iwl_mvm_iface_iterator_data { + struct ieee80211_vif *ignore_vif; + int idx; + + struct iwl_mvm_phy_ctxt *phyctxt; + + u16 ids[MAX_MACS_IN_BINDING]; + u16 colors[MAX_MACS_IN_BINDING]; +}; + +static int iwl_mvm_binding_cmd(struct iwl_mvm *mvm, u32 action, + struct iwl_mvm_iface_iterator_data *data) +{ + struct iwl_binding_cmd cmd; + struct iwl_mvm_phy_ctxt *phyctxt = data->phyctxt; + int i, ret; + u32 status; + + memset(&cmd, 0, sizeof(cmd)); + + cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(phyctxt->id, + phyctxt->color)); + cmd.action = cpu_to_le32(action); + cmd.phy = cpu_to_le32(FW_CMD_ID_AND_COLOR(phyctxt->id, + phyctxt->color)); + + for (i = 0; i < MAX_MACS_IN_BINDING; i++) + cmd.macs[i] = cpu_to_le32(FW_CTXT_INVALID); + for (i = 0; i < data->idx; i++) + cmd.macs[i] = cpu_to_le32(FW_CMD_ID_AND_COLOR(data->ids[i], + data->colors[i])); + + status = 0; + ret = iwl_mvm_send_cmd_pdu_status(mvm, BINDING_CONTEXT_CMD, + sizeof(cmd), &cmd, &status); + if (ret) { + IWL_ERR(mvm, "Failed to send binding (action:%d): %d\n", + action, ret); + return ret; + } + + if (status) { + IWL_ERR(mvm, "Binding command failed: %u\n", status); + ret = -EIO; + } + + return ret; +} + +static void iwl_mvm_iface_iterator(void *_data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_iface_iterator_data *data = _data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (vif == data->ignore_vif) + return; + + if (mvmvif->phy_ctxt != data->phyctxt) + return; + + if (WARN_ON_ONCE(data->idx >= MAX_MACS_IN_BINDING)) + return; + + data->ids[data->idx] = mvmvif->id; + data->colors[data->idx] = mvmvif->color; + data->idx++; +} + +static int iwl_mvm_binding_update(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_mvm_phy_ctxt *phyctxt, + bool add) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_iface_iterator_data data = { + .ignore_vif = vif, + .phyctxt = phyctxt, + }; + u32 action = FW_CTXT_ACTION_MODIFY; + + lockdep_assert_held(&mvm->mutex); + + ieee80211_iterate_active_interfaces_atomic(mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_iface_iterator, + &data); + + /* + * If there are no other interfaces yet we + * need to create a new binding. + */ + if (data.idx == 0) { + if (add) + action = FW_CTXT_ACTION_ADD; + else + action = FW_CTXT_ACTION_REMOVE; + } + + if (add) { + if (WARN_ON_ONCE(data.idx >= MAX_MACS_IN_BINDING)) + return -EINVAL; + + data.ids[data.idx] = mvmvif->id; + data.colors[data.idx] = mvmvif->color; + data.idx++; + } + + return iwl_mvm_binding_cmd(mvm, action, &data); +} + +int iwl_mvm_binding_add_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (WARN_ON_ONCE(!mvmvif->phy_ctxt)) + return -EINVAL; + + return iwl_mvm_binding_update(mvm, vif, mvmvif->phy_ctxt, true); +} + +int iwl_mvm_binding_remove_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (WARN_ON_ONCE(!mvmvif->phy_ctxt)) + return -EINVAL; + + return iwl_mvm_binding_update(mvm, vif, mvmvif->phy_ctxt, false); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c new file mode 100644 index 0000000..9a95c37 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -0,0 +1,841 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include +#include "iwl-modparams.h" +#include "fw-api.h" +#include "mvm.h" + +void iwl_mvm_set_rekey_data(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_gtk_rekey_data *data) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (iwlwifi_mod_params.sw_crypto) + return; + + mutex_lock(&mvm->mutex); + + memcpy(mvmvif->rekey_data.kek, data->kek, NL80211_KEK_LEN); + memcpy(mvmvif->rekey_data.kck, data->kck, NL80211_KCK_LEN); + mvmvif->rekey_data.replay_ctr = + cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr)); + mvmvif->rekey_data.valid = true; + + mutex_unlock(&mvm->mutex); +} + +#if IS_ENABLED(CONFIG_IPV6) +void iwl_mvm_ipv6_addr_change(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct inet6_dev *idev) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct inet6_ifaddr *ifa; + int idx = 0; + + read_lock(&idev->lock); + list_for_each_entry(ifa, &idev->addr_list, if_list) { + mvmvif->target_ipv6_addrs[idx] = ifa->addr; + idx++; + if (idx >= IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS) + break; + } + read_unlock(&idev->lock); + + mvmvif->num_target_ipv6_addrs = idx; +} +#endif + +void iwl_mvm_set_default_unicast_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, int idx) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + mvmvif->tx_key_idx = idx; +} + +static void iwl_mvm_convert_p1k(u16 *p1k, __le16 *out) +{ + int i; + + for (i = 0; i < IWL_P1K_SIZE; i++) + out[i] = cpu_to_le16(p1k[i]); +} + +struct wowlan_key_data { + struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc; + struct iwl_wowlan_tkip_params_cmd *tkip; + bool error, use_rsc_tsc, use_tkip; + int gtk_key_idx; +}; + +static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key, + void *_data) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct wowlan_key_data *data = _data; + struct aes_sc *aes_sc, *aes_tx_sc = NULL; + struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL; + struct iwl_p1k_cache *rx_p1ks; + u8 *rx_mic_key; + struct ieee80211_key_seq seq; + u32 cur_rx_iv32 = 0; + u16 p1k[IWL_P1K_SIZE]; + int ret, i; + + mutex_lock(&mvm->mutex); + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: { /* hack it for now */ + struct { + struct iwl_mvm_wep_key_cmd wep_key_cmd; + struct iwl_mvm_wep_key wep_key; + } __packed wkc = { + .wep_key_cmd.mac_id_n_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color)), + .wep_key_cmd.num_keys = 1, + /* firmware sets STA_KEY_FLG_WEP_13BYTES */ + .wep_key_cmd.decryption_type = STA_KEY_FLG_WEP, + .wep_key.key_index = key->keyidx, + .wep_key.key_size = key->keylen, + }; + + /* + * This will fail -- the key functions don't set support + * pairwise WEP keys. However, that's better than silently + * failing WoWLAN. Or maybe not? + */ + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + break; + + memcpy(&wkc.wep_key.key[3], key->key, key->keylen); + if (key->keyidx == mvmvif->tx_key_idx) { + /* TX key must be at offset 0 */ + wkc.wep_key.key_offset = 0; + } else { + /* others start at 1 */ + data->gtk_key_idx++; + wkc.wep_key.key_offset = data->gtk_key_idx; + } + + ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC, + sizeof(wkc), &wkc); + data->error = ret != 0; + + /* don't upload key again */ + goto out_unlock; + } + default: + data->error = true; + goto out_unlock; + case WLAN_CIPHER_SUITE_AES_CMAC: + /* + * Ignore CMAC keys -- the WoWLAN firmware doesn't support them + * but we also shouldn't abort suspend due to that. It does have + * support for the IGTK key renewal, but doesn't really use the + * IGTK for anything. This means we could spuriously wake up or + * be deauthenticated, but that was considered acceptable. + */ + goto out_unlock; + case WLAN_CIPHER_SUITE_TKIP: + if (sta) { + tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc; + tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc; + + rx_p1ks = data->tkip->rx_uni; + + ieee80211_get_key_tx_seq(key, &seq); + tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16); + tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32); + + ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k); + iwl_mvm_convert_p1k(p1k, data->tkip->tx.p1k); + + memcpy(data->tkip->mic_keys.tx, + &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + IWL_MIC_KEY_SIZE); + + rx_mic_key = data->tkip->mic_keys.rx_unicast; + } else { + tkip_sc = + data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc; + rx_p1ks = data->tkip->rx_multi; + rx_mic_key = data->tkip->mic_keys.rx_mcast; + } + + /* + * For non-QoS this relies on the fact that both the uCode and + * mac80211 use TID 0 (as they need to to avoid replay attacks) + * for checking the IV in the frames. + */ + for (i = 0; i < IWL_NUM_RSC; i++) { + ieee80211_get_key_rx_seq(key, i, &seq); + tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16); + tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32); + /* wrapping isn't allowed, AP must rekey */ + if (seq.tkip.iv32 > cur_rx_iv32) + cur_rx_iv32 = seq.tkip.iv32; + } + + ieee80211_get_tkip_rx_p1k(key, vif->bss_conf.bssid, + cur_rx_iv32, p1k); + iwl_mvm_convert_p1k(p1k, rx_p1ks[0].p1k); + ieee80211_get_tkip_rx_p1k(key, vif->bss_conf.bssid, + cur_rx_iv32 + 1, p1k); + iwl_mvm_convert_p1k(p1k, rx_p1ks[1].p1k); + + memcpy(rx_mic_key, + &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + IWL_MIC_KEY_SIZE); + + data->use_tkip = true; + data->use_rsc_tsc = true; + break; + case WLAN_CIPHER_SUITE_CCMP: + if (sta) { + u8 *pn = seq.ccmp.pn; + + aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc; + aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc; + + ieee80211_get_key_tx_seq(key, &seq); + aes_tx_sc->pn = cpu_to_le64((u64)pn[5] | + ((u64)pn[4] << 8) | + ((u64)pn[3] << 16) | + ((u64)pn[2] << 24) | + ((u64)pn[1] << 32) | + ((u64)pn[0] << 40)); + } else { + aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc; + } + + /* + * For non-QoS this relies on the fact that both the uCode and + * mac80211 use TID 0 for checking the IV in the frames. + */ + for (i = 0; i < IWL_NUM_RSC; i++) { + u8 *pn = seq.ccmp.pn; + + ieee80211_get_key_rx_seq(key, i, &seq); + aes_sc->pn = cpu_to_le64((u64)pn[5] | + ((u64)pn[4] << 8) | + ((u64)pn[3] << 16) | + ((u64)pn[2] << 24) | + ((u64)pn[1] << 32) | + ((u64)pn[0] << 40)); + } + data->use_rsc_tsc = true; + break; + } + + /* + * The D3 firmware hardcodes the key offset 0 as the key it uses + * to transmit packets to the AP, i.e. the PTK. + */ + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { + key->hw_key_idx = 0; + } else { + data->gtk_key_idx++; + key->hw_key_idx = data->gtk_key_idx; + } + + ret = iwl_mvm_set_sta_key(mvm, vif, sta, key, true); + data->error = ret != 0; +out_unlock: + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_send_patterns(struct iwl_mvm *mvm, + struct cfg80211_wowlan *wowlan) +{ + struct iwl_wowlan_patterns_cmd *pattern_cmd; + struct iwl_host_cmd cmd = { + .id = WOWLAN_PATTERNS, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, + .flags = CMD_SYNC, + }; + int i, err; + + if (!wowlan->n_patterns) + return 0; + + cmd.len[0] = sizeof(*pattern_cmd) + + wowlan->n_patterns * sizeof(struct iwl_wowlan_pattern); + + pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL); + if (!pattern_cmd) + return -ENOMEM; + + pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns); + + for (i = 0; i < wowlan->n_patterns; i++) { + int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); + + memcpy(&pattern_cmd->patterns[i].mask, + wowlan->patterns[i].mask, mask_len); + memcpy(&pattern_cmd->patterns[i].pattern, + wowlan->patterns[i].pattern, + wowlan->patterns[i].pattern_len); + pattern_cmd->patterns[i].mask_size = mask_len; + pattern_cmd->patterns[i].pattern_size = + wowlan->patterns[i].pattern_len; + } + + cmd.data[0] = pattern_cmd; + err = iwl_mvm_send_cmd(mvm, &cmd); + kfree(pattern_cmd); + return err; +} + +static int iwl_mvm_send_proto_offload(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct iwl_proto_offload_cmd cmd = {}; +#if IS_ENABLED(CONFIG_IPV6) + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int i; + + if (mvmvif->num_target_ipv6_addrs) { + cmd.enabled |= cpu_to_le32(IWL_D3_PROTO_OFFLOAD_NS); + memcpy(cmd.ndp_mac_addr, vif->addr, ETH_ALEN); + } + + BUILD_BUG_ON(sizeof(cmd.target_ipv6_addr[i]) != + sizeof(mvmvif->target_ipv6_addrs[i])); + + for (i = 0; i < mvmvif->num_target_ipv6_addrs; i++) + memcpy(cmd.target_ipv6_addr[i], + &mvmvif->target_ipv6_addrs[i], + sizeof(cmd.target_ipv6_addr[i])); +#endif + + if (vif->bss_conf.arp_addr_cnt) { + cmd.enabled |= cpu_to_le32(IWL_D3_PROTO_OFFLOAD_ARP); + cmd.host_ipv4_addr = vif->bss_conf.arp_addr_list[0]; + memcpy(cmd.arp_mac_addr, vif->addr, ETH_ALEN); + } + + if (!cmd.enabled) + return 0; + + return iwl_mvm_send_cmd_pdu(mvm, PROT_OFFLOAD_CONFIG_CMD, CMD_SYNC, + sizeof(cmd), &cmd); +} + +struct iwl_d3_iter_data { + struct iwl_mvm *mvm; + struct ieee80211_vif *vif; + bool error; +}; + +static void iwl_mvm_d3_iface_iterator(void *_data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_d3_iter_data *data = _data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (vif->type != NL80211_IFTYPE_STATION || vif->p2p) + return; + + if (mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT) + return; + + if (data->vif) { + IWL_ERR(data->mvm, "More than one managed interface active!\n"); + data->error = true; + return; + } + + data->vif = vif; +} + +static int iwl_mvm_d3_reprogram(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *ap_sta) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct ieee80211_chanctx_conf *ctx; + u8 chains_static, chains_dynamic; + struct cfg80211_chan_def chandef; + int ret, i; + struct iwl_binding_cmd binding_cmd = {}; + struct iwl_time_quota_cmd quota_cmd = {}; + u32 status; + + /* add back the PHY */ + if (WARN_ON(!mvmvif->phy_ctxt)) + return -EINVAL; + + rcu_read_lock(); + ctx = rcu_dereference(vif->chanctx_conf); + if (WARN_ON(!ctx)) { + rcu_read_unlock(); + return -EINVAL; + } + chandef = ctx->def; + chains_static = ctx->rx_chains_static; + chains_dynamic = ctx->rx_chains_dynamic; + rcu_read_unlock(); + + ret = iwl_mvm_phy_ctxt_add(mvm, mvmvif->phy_ctxt, &chandef, + chains_static, chains_dynamic); + if (ret) + return ret; + + /* add back the MAC */ + mvmvif->uploaded = false; + + if (WARN_ON(!vif->bss_conf.assoc)) + return -EINVAL; + /* hack */ + vif->bss_conf.assoc = false; + ret = iwl_mvm_mac_ctxt_add(mvm, vif); + vif->bss_conf.assoc = true; + if (ret) + return ret; + + /* add back binding - XXX refactor? */ + binding_cmd.id_and_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->phy_ctxt->id, + mvmvif->phy_ctxt->color)); + binding_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); + binding_cmd.phy = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->phy_ctxt->id, + mvmvif->phy_ctxt->color)); + binding_cmd.macs[0] = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color)); + for (i = 1; i < MAX_MACS_IN_BINDING; i++) + binding_cmd.macs[i] = cpu_to_le32(FW_CTXT_INVALID); + + status = 0; + ret = iwl_mvm_send_cmd_pdu_status(mvm, BINDING_CONTEXT_CMD, + sizeof(binding_cmd), &binding_cmd, + &status); + if (ret) { + IWL_ERR(mvm, "Failed to add binding: %d\n", ret); + return ret; + } + + if (status) { + IWL_ERR(mvm, "Binding command failed: %u\n", status); + return -EIO; + } + + ret = iwl_mvm_sta_add_to_fw(mvm, ap_sta); + if (ret) + return ret; + rcu_assign_pointer(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id], ap_sta); + + ret = iwl_mvm_mac_ctxt_changed(mvm, vif); + if (ret) + return ret; + + /* and some quota */ + quota_cmd.quotas[0].id_and_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->phy_ctxt->id, + mvmvif->phy_ctxt->color)); + quota_cmd.quotas[0].quota = cpu_to_le32(100); + quota_cmd.quotas[0].max_duration = cpu_to_le32(1000); + + for (i = 1; i < MAX_BINDINGS; i++) + quota_cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID); + + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, CMD_SYNC, + sizeof(quota_cmd), "a_cmd); + if (ret) + IWL_ERR(mvm, "Failed to send quota: %d\n", ret); + + return 0; +} + +int iwl_mvm_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_d3_iter_data suspend_iter_data = { + .mvm = mvm, + }; + struct ieee80211_vif *vif; + struct iwl_mvm_vif *mvmvif; + struct ieee80211_sta *ap_sta; + struct iwl_mvm_sta *mvm_ap_sta; + struct iwl_wowlan_config_cmd wowlan_config_cmd = {}; + struct iwl_wowlan_kek_kck_material_cmd kek_kck_cmd = {}; + struct iwl_wowlan_tkip_params_cmd tkip_cmd = {}; + struct iwl_d3_manager_config d3_cfg_cmd = {}; + struct wowlan_key_data key_data = { + .use_rsc_tsc = false, + .tkip = &tkip_cmd, + .use_tkip = false, + }; + int ret, i; + u16 seq; + u8 old_aux_sta_id, old_ap_sta_id = IWL_MVM_STATION_COUNT; + + if (WARN_ON(!wowlan)) + return -EINVAL; + + key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL); + if (!key_data.rsc_tsc) + return -ENOMEM; + + mutex_lock(&mvm->mutex); + + old_aux_sta_id = mvm->aux_sta.sta_id; + + /* see if there's only a single BSS vif and it's associated */ + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_d3_iface_iterator, &suspend_iter_data); + + if (suspend_iter_data.error || !suspend_iter_data.vif) { + ret = 1; + goto out_noreset; + } + + vif = suspend_iter_data.vif; + mvmvif = iwl_mvm_vif_from_mac80211(vif); + + ap_sta = rcu_dereference_protected( + mvm->fw_id_to_mac_id[mvmvif->ap_sta_id], + lockdep_is_held(&mvm->mutex)); + if (IS_ERR_OR_NULL(ap_sta)) { + ret = -EINVAL; + goto out_noreset; + } + + mvm_ap_sta = (struct iwl_mvm_sta *)ap_sta->drv_priv; + + /* + * The D3 firmware still hardcodes the AP station ID for the + * BSS we're associated with as 0. Store the real STA ID here + * and assign 0. When we leave this function, we'll restore + * the original value for the resume code. + */ + old_ap_sta_id = mvm_ap_sta->sta_id; + mvm_ap_sta->sta_id = 0; + mvmvif->ap_sta_id = 0; + + /* TODO: wowlan_config_cmd.wowlan_ba_teardown_tids */ + + wowlan_config_cmd.is_11n_connection = ap_sta->ht_cap.ht_supported; + + /* + * We know the last used seqno, and the uCode expects to know that + * one, it will increment before TX. + */ + seq = mvm_ap_sta->last_seq_ctl & IEEE80211_SCTL_SEQ; + wowlan_config_cmd.non_qos_seq = cpu_to_le16(seq); + + /* + * For QoS counters, we store the one to use next, so subtract 0x10 + * since the uCode will add 0x10 *before* using the value while we + * increment after using the value (i.e. store the next value to use). + */ + for (i = 0; i < IWL_MAX_TID_COUNT; i++) { + seq = mvm_ap_sta->tid_data[i].seq_number; + seq -= 0x10; + wowlan_config_cmd.qos_seq[i] = cpu_to_le16(seq); + } + + if (wowlan->disconnect) + wowlan_config_cmd.wakeup_filter |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_BEACON_MISS | + IWL_WOWLAN_WAKEUP_LINK_CHANGE); + if (wowlan->magic_pkt) + wowlan_config_cmd.wakeup_filter |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_MAGIC_PACKET); + if (wowlan->gtk_rekey_failure) + wowlan_config_cmd.wakeup_filter |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_GTK_REKEY_FAIL); + if (wowlan->eap_identity_req) + wowlan_config_cmd.wakeup_filter |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_EAP_IDENT_REQ); + if (wowlan->four_way_handshake) + wowlan_config_cmd.wakeup_filter |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_4WAY_HANDSHAKE); + if (wowlan->n_patterns) + wowlan_config_cmd.wakeup_filter |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_PATTERN_MATCH); + + if (wowlan->rfkill_release) + d3_cfg_cmd.wakeup_flags |= + cpu_to_le32(IWL_WOWLAN_WAKEUP_RF_KILL_DEASSERT); + + iwl_mvm_cancel_scan(mvm); + + iwl_trans_stop_device(mvm->trans); + + /* + * Set the HW restart bit -- this is mostly true as we're + * going to load new firmware and reprogram that, though + * the reprogramming is going to be manual to avoid adding + * all the MACs that aren't support. + * We don't have to clear up everything though because the + * reprogramming is manual. When we resume, we'll actually + * go through a proper restart sequence again to switch + * back to the runtime firmware image. + */ + set_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + + /* We reprogram keys and shouldn't allocate new key indices */ + memset(mvm->fw_key_table, 0, sizeof(mvm->fw_key_table)); + + /* + * The D3 firmware still hardcodes the AP station ID for the + * BSS we're associated with as 0. As a result, we have to move + * the auxiliary station to ID 1 so the ID 0 remains free for + * the AP station for later. + * We set the sta_id to 1 here, and reset it to its previous + * value (that we stored above) later. + */ + mvm->aux_sta.sta_id = 1; + + ret = iwl_mvm_load_d3_fw(mvm); + if (ret) + goto out; + + ret = iwl_mvm_d3_reprogram(mvm, vif, ap_sta); + if (ret) + goto out; + + if (!iwlwifi_mod_params.sw_crypto) { + /* + * This needs to be unlocked due to lock ordering + * constraints. Since we're in the suspend path + * that isn't really a problem though. + */ + mutex_unlock(&mvm->mutex); + ieee80211_iter_keys(mvm->hw, vif, + iwl_mvm_wowlan_program_keys, + &key_data); + mutex_lock(&mvm->mutex); + if (key_data.error) { + ret = -EIO; + goto out; + } + + if (key_data.use_rsc_tsc) { + struct iwl_host_cmd rsc_tsc_cmd = { + .id = WOWLAN_TSC_RSC_PARAM, + .flags = CMD_SYNC, + .data[0] = key_data.rsc_tsc, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, + .len[0] = sizeof(*key_data.rsc_tsc), + }; + + ret = iwl_mvm_send_cmd(mvm, &rsc_tsc_cmd); + if (ret) + goto out; + } + + if (key_data.use_tkip) { + ret = iwl_mvm_send_cmd_pdu(mvm, + WOWLAN_TKIP_PARAM, + CMD_SYNC, sizeof(tkip_cmd), + &tkip_cmd); + if (ret) + goto out; + } + + if (mvmvif->rekey_data.valid) { + memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd)); + memcpy(kek_kck_cmd.kck, mvmvif->rekey_data.kck, + NL80211_KCK_LEN); + kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN); + memcpy(kek_kck_cmd.kek, mvmvif->rekey_data.kek, + NL80211_KEK_LEN); + kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN); + kek_kck_cmd.replay_ctr = mvmvif->rekey_data.replay_ctr; + + ret = iwl_mvm_send_cmd_pdu(mvm, + WOWLAN_KEK_KCK_MATERIAL, + CMD_SYNC, + sizeof(kek_kck_cmd), + &kek_kck_cmd); + if (ret) + goto out; + } + } + + ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_CONFIGURATION, + CMD_SYNC, sizeof(wowlan_config_cmd), + &wowlan_config_cmd); + if (ret) + goto out; + + ret = iwl_mvm_send_patterns(mvm, wowlan); + if (ret) + goto out; + + ret = iwl_mvm_send_proto_offload(mvm, vif); + if (ret) + goto out; + + /* must be last -- this switches firmware state */ + ret = iwl_mvm_send_cmd_pdu(mvm, D3_CONFIG_CMD, CMD_SYNC, + sizeof(d3_cfg_cmd), &d3_cfg_cmd); + if (ret) + goto out; + + clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + + iwl_trans_d3_suspend(mvm->trans); + out: + mvm->aux_sta.sta_id = old_aux_sta_id; + mvm_ap_sta->sta_id = old_ap_sta_id; + mvmvif->ap_sta_id = old_ap_sta_id; + out_noreset: + kfree(key_data.rsc_tsc); + if (ret < 0) + ieee80211_restart_hw(mvm->hw); + + mutex_unlock(&mvm->mutex); + + return ret; +} + +int iwl_mvm_resume(struct ieee80211_hw *hw) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_d3_iter_data resume_iter_data = { + .mvm = mvm, + }; + struct ieee80211_vif *vif = NULL; + u32 base; + int ret; + enum iwl_d3_status d3_status; + struct error_table_start { + /* cf. struct iwl_error_event_table */ + u32 valid; + u32 error_id; + } err_info; + + mutex_lock(&mvm->mutex); + + /* get the BSS vif pointer again */ + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_d3_iface_iterator, &resume_iter_data); + + if (WARN_ON(resume_iter_data.error || !resume_iter_data.vif)) + goto out_unlock; + + vif = resume_iter_data.vif; + + ret = iwl_trans_d3_resume(mvm->trans, &d3_status); + if (ret) + goto out_unlock; + + if (d3_status != IWL_D3_STATUS_ALIVE) { + IWL_INFO(mvm, "Device was reset during suspend\n"); + goto out_unlock; + } + + base = mvm->error_event_table; + + iwl_trans_read_mem_bytes(mvm->trans, base, + &err_info, sizeof(err_info)); + + if (err_info.valid) { + IWL_INFO(mvm, "error table is valid (%d)\n", + err_info.valid); + if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) + IWL_ERR(mvm, "this was due to RF-kill\n"); + goto out_unlock; + } + + /* TODO: get status and whatever else ... */ + ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_GET_STATUSES, CMD_SYNC, 0, NULL); + if (ret) + IWL_ERR(mvm, "failed to query status (%d)\n", ret); + + ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); + if (ret) + IWL_ERR(mvm, "failed to query offloads (%d)\n", ret); + + out_unlock: + mutex_unlock(&mvm->mutex); + + if (vif) + ieee80211_resume_disconnect(vif); + + /* return 1 to reconfigure the device */ + set_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + return 1; +} + +void iwl_mvm_set_wakeup(struct ieee80211_hw *hw, bool enabled) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + device_set_wakeup_enable(mvm->trans->dev, enabled); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c new file mode 100644 index 0000000..c1bdb55 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -0,0 +1,378 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include "mvm.h" +#include "sta.h" +#include "iwl-io.h" + +struct iwl_dbgfs_mvm_ctx { + struct iwl_mvm *mvm; + struct ieee80211_vif *vif; +}; + +static int iwl_dbgfs_open_file_generic(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t iwl_dbgfs_tx_flush_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + + char buf[16]; + int buf_size, ret; + u32 scd_q_msk; + + if (!mvm->ucode_loaded || mvm->cur_ucode != IWL_UCODE_REGULAR) + return -EIO; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x", &scd_q_msk) != 1) + return -EINVAL; + + IWL_ERR(mvm, "FLUSHING queues: scd_q_msk = 0x%x\n", scd_q_msk); + + mutex_lock(&mvm->mutex); + ret = iwl_mvm_flush_tx_path(mvm, scd_q_msk, true) ? : count; + mutex_unlock(&mvm->mutex); + + return ret; +} + +static ssize_t iwl_dbgfs_sta_drain_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + struct ieee80211_sta *sta; + + char buf[8]; + int buf_size, sta_id, drain, ret; + + if (!mvm->ucode_loaded || mvm->cur_ucode != IWL_UCODE_REGULAR) + return -EIO; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%d %d", &sta_id, &drain) != 2) + return -EINVAL; + + mutex_lock(&mvm->mutex); + + sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + if (IS_ERR_OR_NULL(sta)) + ret = -ENOENT; + else + ret = iwl_mvm_drain_sta(mvm, (void *)sta->drv_priv, drain) ? : + count; + + mutex_unlock(&mvm->mutex); + + return ret; +} + +static ssize_t iwl_dbgfs_sram_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + const struct fw_img *img; + int ofs, len, pos = 0; + size_t bufsz, ret; + char *buf; + u8 *ptr; + + /* default is to dump the entire data segment */ + if (!mvm->dbgfs_sram_offset && !mvm->dbgfs_sram_len) { + mvm->dbgfs_sram_offset = 0x800000; + if (!mvm->ucode_loaded) + return -EINVAL; + img = &mvm->fw->img[mvm->cur_ucode]; + mvm->dbgfs_sram_len = img->sec[IWL_UCODE_SECTION_DATA].len; + } + len = mvm->dbgfs_sram_len; + + bufsz = len * 4 + 256; + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ptr = kzalloc(len, GFP_KERNEL); + if (!ptr) { + kfree(buf); + return -ENOMEM; + } + + pos += scnprintf(buf + pos, bufsz - pos, "sram_len: 0x%x\n", len); + pos += scnprintf(buf + pos, bufsz - pos, "sram_offset: 0x%x\n", + mvm->dbgfs_sram_offset); + + iwl_trans_read_mem_bytes(mvm->trans, + mvm->dbgfs_sram_offset, + ptr, len); + for (ofs = 0; ofs < len; ofs += 16) { + pos += scnprintf(buf + pos, bufsz - pos, "0x%.4x ", ofs); + hex_dump_to_buffer(ptr + ofs, 16, 16, 1, buf + pos, + bufsz - pos, false); + pos += strlen(buf + pos); + if (bufsz - pos > 0) + buf[pos++] = '\n'; + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + + kfree(buf); + kfree(ptr); + + return ret; +} + +static ssize_t iwl_dbgfs_sram_write(struct file *file, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + char buf[64]; + int buf_size; + u32 offset, len; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x,%x", &offset, &len) == 2) { + if ((offset & 0x3) || (len & 0x3)) + return -EINVAL; + mvm->dbgfs_sram_offset = offset; + mvm->dbgfs_sram_len = len; + } else { + mvm->dbgfs_sram_offset = 0; + mvm->dbgfs_sram_len = 0; + } + + return count; +} + +static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + struct ieee80211_sta *sta; + char buf[400]; + int i, pos = 0, bufsz = sizeof(buf); + + mutex_lock(&mvm->mutex); + + for (i = 0; i < IWL_MVM_STATION_COUNT; i++) { + pos += scnprintf(buf + pos, bufsz - pos, "%.2d: ", i); + sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[i], + lockdep_is_held(&mvm->mutex)); + if (!sta) + pos += scnprintf(buf + pos, bufsz - pos, "N/A\n"); + else if (IS_ERR(sta)) + pos += scnprintf(buf + pos, bufsz - pos, "%ld\n", + PTR_ERR(sta)); + else + pos += scnprintf(buf + pos, bufsz - pos, "%pM\n", + sta->addr); + } + + mutex_unlock(&mvm->mutex); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_power_down_allow_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + char buf[8] = {}; + int allow; + + if (!mvm->ucode_loaded) + return -EIO; + + if (copy_from_user(buf, user_buf, sizeof(buf))) + return -EFAULT; + + if (sscanf(buf, "%d", &allow) != 1) + return -EINVAL; + + IWL_DEBUG_POWER(mvm, "%s device power down\n", + allow ? "allow" : "prevent"); + + /* + * TODO: Send REPLY_DEBUG_CMD (0xf0) when FW support it + */ + + return count; +} + +static ssize_t iwl_dbgfs_power_down_d3_allow_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_mvm *mvm = file->private_data; + char buf[8] = {}; + int allow; + + if (copy_from_user(buf, user_buf, sizeof(buf))) + return -EFAULT; + + if (sscanf(buf, "%d", &allow) != 1) + return -EINVAL; + + IWL_DEBUG_POWER(mvm, "%s device power down in d3\n", + allow ? "allow" : "prevent"); + + /* + * TODO: When WoWLAN FW alive notification happens, driver will send + * REPLY_DEBUG_CMD setting power_down_allow flag according to + * mvm->prevent_power_down_d3 + */ + mvm->prevent_power_down_d3 = !allow; + + return count; +} + +#define MVM_DEBUGFS_READ_FILE_OPS(name) \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .read = iwl_dbgfs_##name##_read, \ + .open = iwl_dbgfs_open_file_generic, \ + .llseek = generic_file_llseek, \ +} + +#define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name) \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .write = iwl_dbgfs_##name##_write, \ + .read = iwl_dbgfs_##name##_read, \ + .open = iwl_dbgfs_open_file_generic, \ + .llseek = generic_file_llseek, \ +}; + +#define MVM_DEBUGFS_WRITE_FILE_OPS(name) \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .write = iwl_dbgfs_##name##_write, \ + .open = iwl_dbgfs_open_file_generic, \ + .llseek = generic_file_llseek, \ +}; + +#define MVM_DEBUGFS_ADD_FILE(name, parent, mode) do { \ + if (!debugfs_create_file(#name, mode, parent, mvm, \ + &iwl_dbgfs_##name##_ops)) \ + goto err; \ + } while (0) + +#define MVM_DEBUGFS_ADD_FILE_VIF(name, parent, mode) do { \ + if (!debugfs_create_file(#name, mode, parent, vif, \ + &iwl_dbgfs_##name##_ops)) \ + goto err; \ + } while (0) + +/* Device wide debugfs entries */ +MVM_DEBUGFS_WRITE_FILE_OPS(tx_flush); +MVM_DEBUGFS_WRITE_FILE_OPS(sta_drain); +MVM_DEBUGFS_READ_WRITE_FILE_OPS(sram); +MVM_DEBUGFS_READ_FILE_OPS(stations); +MVM_DEBUGFS_WRITE_FILE_OPS(power_down_allow); +MVM_DEBUGFS_WRITE_FILE_OPS(power_down_d3_allow); + +int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir) +{ + char buf[100]; + + mvm->debugfs_dir = dbgfs_dir; + + MVM_DEBUGFS_ADD_FILE(tx_flush, mvm->debugfs_dir, S_IWUSR); + MVM_DEBUGFS_ADD_FILE(sta_drain, mvm->debugfs_dir, S_IWUSR); + MVM_DEBUGFS_ADD_FILE(sram, mvm->debugfs_dir, S_IWUSR | S_IRUSR); + MVM_DEBUGFS_ADD_FILE(stations, dbgfs_dir, S_IRUSR); + MVM_DEBUGFS_ADD_FILE(power_down_allow, mvm->debugfs_dir, S_IWUSR); + MVM_DEBUGFS_ADD_FILE(power_down_d3_allow, mvm->debugfs_dir, S_IWUSR); + + /* + * Create a symlink with mac80211. It will be removed when mac80211 + * exists (before the opmode exists which removes the target.) + */ + snprintf(buf, 100, "../../%s/%s", + dbgfs_dir->d_parent->d_parent->d_name.name, + dbgfs_dir->d_parent->d_name.name); + if (!debugfs_create_symlink("iwlwifi", mvm->hw->wiphy->debugfsdir, buf)) + goto err; + + return 0; +err: + IWL_ERR(mvm, "Can't create the mvm debugfs directory\n"); + return -ENOMEM; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h new file mode 100644 index 0000000..cf6f9a0 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h @@ -0,0 +1,282 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_d3_h__ +#define __fw_api_d3_h__ + +/** + * enum iwl_d3_wakeup_flags - D3 manager wakeup flags + * @IWL_WAKEUP_D3_CONFIG_FW_ERROR: wake up on firmware sysassert + */ +enum iwl_d3_wakeup_flags { + IWL_WAKEUP_D3_CONFIG_FW_ERROR = BIT(0), +}; /* D3_MANAGER_WAKEUP_CONFIG_API_E_VER_3 */ + +/** + * struct iwl_d3_manager_config - D3 manager configuration command + * @min_sleep_time: minimum sleep time (in usec) + * @wakeup_flags: wakeup flags, see &enum iwl_d3_wakeup_flags + * + * The structure is used for the D3_CONFIG_CMD command. + */ +struct iwl_d3_manager_config { + __le32 min_sleep_time; + __le32 wakeup_flags; +} __packed; /* D3_MANAGER_CONFIG_CMD_S_VER_3 */ + + +/* TODO: OFFLOADS_QUERY_API_S_VER_1 */ + +/** + * enum iwl_d3_proto_offloads - enabled protocol offloads + * @IWL_D3_PROTO_OFFLOAD_ARP: ARP data is enabled + * @IWL_D3_PROTO_OFFLOAD_NS: NS (Neighbor Solicitation) is enabled + */ +enum iwl_proto_offloads { + IWL_D3_PROTO_OFFLOAD_ARP = BIT(0), + IWL_D3_PROTO_OFFLOAD_NS = BIT(1), +}; + +#define IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS 2 + +/** + * struct iwl_proto_offload_cmd - ARP/NS offload configuration + * @enabled: enable flags + * @remote_ipv4_addr: remote address to answer to (or zero if all) + * @host_ipv4_addr: our IPv4 address to respond to queries for + * @arp_mac_addr: our MAC address for ARP responses + * @remote_ipv6_addr: remote address to answer to (or zero if all) + * @solicited_node_ipv6_addr: broken -- solicited node address exists + * for each target address + * @target_ipv6_addr: our target addresses + * @ndp_mac_addr: neighbor soliciation response MAC address + */ +struct iwl_proto_offload_cmd { + __le32 enabled; + __be32 remote_ipv4_addr; + __be32 host_ipv4_addr; + u8 arp_mac_addr[ETH_ALEN]; + __le16 reserved1; + + u8 remote_ipv6_addr[16]; + u8 solicited_node_ipv6_addr[16]; + u8 target_ipv6_addr[IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS][16]; + u8 ndp_mac_addr[ETH_ALEN]; + __le16 reserved2; +} __packed; /* PROT_OFFLOAD_CONFIG_CMD_DB_S_VER_1 */ + + +/* + * WOWLAN_PATTERNS + */ +#define IWL_WOWLAN_MIN_PATTERN_LEN 16 +#define IWL_WOWLAN_MAX_PATTERN_LEN 128 + +struct iwl_wowlan_pattern { + u8 mask[IWL_WOWLAN_MAX_PATTERN_LEN / 8]; + u8 pattern[IWL_WOWLAN_MAX_PATTERN_LEN]; + u8 mask_size; + u8 pattern_size; + __le16 reserved; +} __packed; /* WOWLAN_PATTERN_API_S_VER_1 */ + +#define IWL_WOWLAN_MAX_PATTERNS 20 + +struct iwl_wowlan_patterns_cmd { + __le32 n_patterns; + struct iwl_wowlan_pattern patterns[]; +} __packed; /* WOWLAN_PATTERN_ARRAY_API_S_VER_1 */ + +enum iwl_wowlan_wakeup_filters { + IWL_WOWLAN_WAKEUP_MAGIC_PACKET = BIT(0), + IWL_WOWLAN_WAKEUP_PATTERN_MATCH = BIT(1), + IWL_WOWLAN_WAKEUP_BEACON_MISS = BIT(2), + IWL_WOWLAN_WAKEUP_LINK_CHANGE = BIT(3), + IWL_WOWLAN_WAKEUP_GTK_REKEY_FAIL = BIT(4), + IWL_WOWLAN_WAKEUP_EAP_IDENT_REQ = BIT(5), + IWL_WOWLAN_WAKEUP_4WAY_HANDSHAKE = BIT(6), + IWL_WOWLAN_WAKEUP_ENABLE_NET_DETECT = BIT(7), + IWL_WOWLAN_WAKEUP_RF_KILL_DEASSERT = BIT(8), + IWL_WOWLAN_WAKEUP_REMOTE_LINK_LOSS = BIT(9), + IWL_WOWLAN_WAKEUP_REMOTE_SIGNATURE_TABLE = BIT(10), + /* BIT(11) reserved */ + IWL_WOWLAN_WAKEUP_REMOTE_WAKEUP_PACKET = BIT(12), +}; /* WOWLAN_WAKEUP_FILTER_API_E_VER_4 */ + +struct iwl_wowlan_config_cmd { + __le32 wakeup_filter; + __le16 non_qos_seq; + __le16 qos_seq[8]; + u8 wowlan_ba_teardown_tids; + u8 is_11n_connection; +} __packed; /* WOWLAN_CONFIG_API_S_VER_2 */ + +/* + * WOWLAN_TSC_RSC_PARAMS + */ +#define IWL_NUM_RSC 16 + +struct tkip_sc { + __le16 iv16; + __le16 pad; + __le32 iv32; +} __packed; /* TKIP_SC_API_U_VER_1 */ + +struct iwl_tkip_rsc_tsc { + struct tkip_sc unicast_rsc[IWL_NUM_RSC]; + struct tkip_sc multicast_rsc[IWL_NUM_RSC]; + struct tkip_sc tsc; +} __packed; /* TKIP_TSC_RSC_API_S_VER_1 */ + +struct aes_sc { + __le64 pn; +} __packed; /* TKIP_AES_SC_API_U_VER_1 */ + +struct iwl_aes_rsc_tsc { + struct aes_sc unicast_rsc[IWL_NUM_RSC]; + struct aes_sc multicast_rsc[IWL_NUM_RSC]; + struct aes_sc tsc; +} __packed; /* AES_TSC_RSC_API_S_VER_1 */ + +union iwl_all_tsc_rsc { + struct iwl_tkip_rsc_tsc tkip; + struct iwl_aes_rsc_tsc aes; +}; /* ALL_TSC_RSC_API_S_VER_2 */ + +struct iwl_wowlan_rsc_tsc_params_cmd { + union iwl_all_tsc_rsc all_tsc_rsc; +} __packed; /* ALL_TSC_RSC_API_S_VER_2 */ + +#define IWL_MIC_KEY_SIZE 8 +struct iwl_mic_keys { + u8 tx[IWL_MIC_KEY_SIZE]; + u8 rx_unicast[IWL_MIC_KEY_SIZE]; + u8 rx_mcast[IWL_MIC_KEY_SIZE]; +} __packed; /* MIC_KEYS_API_S_VER_1 */ + +#define IWL_P1K_SIZE 5 +struct iwl_p1k_cache { + __le16 p1k[IWL_P1K_SIZE]; +} __packed; + +#define IWL_NUM_RX_P1K_CACHE 2 + +struct iwl_wowlan_tkip_params_cmd { + struct iwl_mic_keys mic_keys; + struct iwl_p1k_cache tx; + struct iwl_p1k_cache rx_uni[IWL_NUM_RX_P1K_CACHE]; + struct iwl_p1k_cache rx_multi[IWL_NUM_RX_P1K_CACHE]; +} __packed; /* WOWLAN_TKIP_SETTING_API_S_VER_1 */ + +#define IWL_KCK_MAX_SIZE 32 +#define IWL_KEK_MAX_SIZE 32 + +struct iwl_wowlan_kek_kck_material_cmd { + u8 kck[IWL_KCK_MAX_SIZE]; + u8 kek[IWL_KEK_MAX_SIZE]; + __le16 kck_len; + __le16 kek_len; + __le64 replay_ctr; +} __packed; /* KEK_KCK_MATERIAL_API_S_VER_2 */ + +#define RF_KILL_INDICATOR_FOR_WOWLAN 0x87 + +enum iwl_wowlan_rekey_status { + IWL_WOWLAN_REKEY_POST_REKEY = 0, + IWL_WOWLAN_REKEY_WHILE_REKEY = 1, +}; /* WOWLAN_REKEY_STATUS_API_E_VER_1 */ + +enum iwl_wowlan_wakeup_reason { + IWL_WOWLAN_WAKEUP_BY_NON_WIRELESS = 0, + IWL_WOWLAN_WAKEUP_BY_MAGIC_PACKET = BIT(0), + IWL_WOWLAN_WAKEUP_BY_PATTERN = BIT(1), + IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_MISSED_BEACON = BIT(2), + IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_DEAUTH = BIT(3), + IWL_WOWLAN_WAKEUP_BY_GTK_REKEY_FAILURE = BIT(4), + IWL_WOWLAN_WAKEUP_BY_RFKILL_DEASSERTED = BIT(5), + IWL_WOWLAN_WAKEUP_BY_UCODE_ERROR = BIT(6), + IWL_WOWLAN_WAKEUP_BY_EAPOL_REQUEST = BIT(7), + IWL_WOWLAN_WAKEUP_BY_FOUR_WAY_HANDSHAKE = BIT(8), + IWL_WOWLAN_WAKEUP_BY_REM_WAKE_LINK_LOSS = BIT(9), + IWL_WOWLAN_WAKEUP_BY_REM_WAKE_SIGNATURE_TABLE = BIT(10), + IWL_WOWLAN_WAKEUP_BY_REM_WAKE_TCP_EXTERNAL = BIT(11), + IWL_WOWLAN_WAKEUP_BY_REM_WAKE_WAKEUP_PACKET = BIT(12), +}; /* WOWLAN_WAKE_UP_REASON_API_E_VER_2 */ + +struct iwl_wowlan_status { + __le64 replay_ctr; + __le16 pattern_number; + __le16 non_qos_seq_ctr; + __le16 qos_seq_ctr[8]; + __le32 wakeup_reasons; + __le32 rekey_status; + __le32 num_of_gtk_rekeys; + __le32 transmitted_ndps; + __le32 received_beacons; + __le32 wake_packet_length; + __le32 wake_packet_bufsize; + u8 wake_packet[]; /* can be truncated from _length to _bufsize */ +} __packed; /* WOWLAN_STATUSES_API_S_VER_4 */ + +/* TODO: NetDetect API */ + +#endif /* __fw_api_d3_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h new file mode 100644 index 0000000..ae39b7d --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h @@ -0,0 +1,369 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_mac_h__ +#define __fw_api_mac_h__ + +/* + * The first MAC indices (starting from 0) + * are available to the driver, AUX follows + */ +#define MAC_INDEX_AUX 4 +#define MAC_INDEX_MIN_DRIVER 0 +#define NUM_MAC_INDEX_DRIVER MAC_INDEX_AUX + +#define AC_NUM 4 /* Number of access categories */ + +/** + * enum iwl_mac_protection_flags - MAC context flags + * @MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames, + * this will require CCK RTS/CTS2self. + * RTS/CTS will protect full burst time. + * @MAC_PROT_FLG_HT_PROT: enable HT protection + * @MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions + * @MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self + */ +enum iwl_mac_protection_flags { + MAC_PROT_FLG_TGG_PROTECT = BIT(3), + MAC_PROT_FLG_HT_PROT = BIT(23), + MAC_PROT_FLG_FAT_PROT = BIT(24), + MAC_PROT_FLG_SELF_CTS_EN = BIT(30), +}; + +#define MAC_FLG_SHORT_SLOT BIT(4) +#define MAC_FLG_SHORT_PREAMBLE BIT(5) + +/** + * enum iwl_mac_types - Supported MAC types + * @FW_MAC_TYPE_FIRST: lowest supported MAC type + * @FW_MAC_TYPE_AUX: Auxiliary MAC (internal) + * @FW_MAC_TYPE_LISTENER: monitor MAC type (?) + * @FW_MAC_TYPE_PIBSS: Pseudo-IBSS + * @FW_MAC_TYPE_IBSS: IBSS + * @FW_MAC_TYPE_BSS_STA: BSS (managed) station + * @FW_MAC_TYPE_P2P_DEVICE: P2P Device + * @FW_MAC_TYPE_P2P_STA: P2P client + * @FW_MAC_TYPE_GO: P2P GO + * @FW_MAC_TYPE_TEST: ? + * @FW_MAC_TYPE_MAX: highest support MAC type + */ +enum iwl_mac_types { + FW_MAC_TYPE_FIRST = 1, + FW_MAC_TYPE_AUX = FW_MAC_TYPE_FIRST, + FW_MAC_TYPE_LISTENER, + FW_MAC_TYPE_PIBSS, + FW_MAC_TYPE_IBSS, + FW_MAC_TYPE_BSS_STA, + FW_MAC_TYPE_P2P_DEVICE, + FW_MAC_TYPE_P2P_STA, + FW_MAC_TYPE_GO, + FW_MAC_TYPE_TEST, + FW_MAC_TYPE_MAX = FW_MAC_TYPE_TEST +}; /* MAC_CONTEXT_TYPE_API_E_VER_1 */ + +/** + * enum iwl_tsf_id - TSF hw timer ID + * @TSF_ID_A: use TSF A + * @TSF_ID_B: use TSF B + * @TSF_ID_C: use TSF C + * @TSF_ID_D: use TSF D + * @NUM_TSF_IDS: number of TSF timers available + */ +enum iwl_tsf_id { + TSF_ID_A = 0, + TSF_ID_B = 1, + TSF_ID_C = 2, + TSF_ID_D = 3, + NUM_TSF_IDS = 4, +}; /* TSF_ID_API_E_VER_1 */ + +/** + * struct iwl_mac_data_ap - configuration data for AP MAC context + * @beacon_time: beacon transmit time in system time + * @beacon_tsf: beacon transmit time in TSF + * @bi: beacon interval in TU + * @bi_reciprocal: 2^32 / bi + * @dtim_interval: dtim transmit time in TU + * @dtim_reciprocal: 2^32 / dtim_interval + * @mcast_qid: queue ID for multicast traffic + * @beacon_template: beacon template ID + */ +struct iwl_mac_data_ap { + __le32 beacon_time; + __le64 beacon_tsf; + __le32 bi; + __le32 bi_reciprocal; + __le32 dtim_interval; + __le32 dtim_reciprocal; + __le32 mcast_qid; + __le32 beacon_template; +} __packed; /* AP_MAC_DATA_API_S_VER_1 */ + +/** + * struct iwl_mac_data_ibss - configuration data for IBSS MAC context + * @beacon_time: beacon transmit time in system time + * @beacon_tsf: beacon transmit time in TSF + * @bi: beacon interval in TU + * @bi_reciprocal: 2^32 / bi + */ +struct iwl_mac_data_ibss { + __le32 beacon_time; + __le64 beacon_tsf; + __le32 bi; + __le32 bi_reciprocal; +} __packed; /* IBSS_MAC_DATA_API_S_VER_1 */ + +/** + * struct iwl_mac_data_sta - configuration data for station MAC context + * @is_assoc: 1 for associated state, 0 otherwise + * @dtim_time: DTIM arrival time in system time + * @dtim_tsf: DTIM arrival time in TSF + * @bi: beacon interval in TU, applicable only when associated + * @bi_reciprocal: 2^32 / bi , applicable only when associated + * @dtim_interval: DTIM interval in TU, applicable only when associated + * @dtim_reciprocal: 2^32 / dtim_interval , applicable only when associated + * @listen_interval: in beacon intervals, applicable only when associated + * @assoc_id: unique ID assigned by the AP during association + */ +struct iwl_mac_data_sta { + __le32 is_assoc; + __le32 dtim_time; + __le64 dtim_tsf; + __le32 bi; + __le32 bi_reciprocal; + __le32 dtim_interval; + __le32 dtim_reciprocal; + __le32 listen_interval; + __le32 assoc_id; + __le32 assoc_beacon_arrive_time; +} __packed; /* STA_MAC_DATA_API_S_VER_1 */ + +/** + * struct iwl_mac_data_go - configuration data for P2P GO MAC context + * @ap: iwl_mac_data_ap struct with most config data + * @ctwin: client traffic window in TU (period after TBTT when GO is present). + * 0 indicates that there is no CT window. + * @opp_ps_enabled: indicate that opportunistic PS allowed + */ +struct iwl_mac_data_go { + struct iwl_mac_data_ap ap; + __le32 ctwin; + __le32 opp_ps_enabled; +} __packed; /* GO_MAC_DATA_API_S_VER_1 */ + +/** + * struct iwl_mac_data_p2p_sta - configuration data for P2P client MAC context + * @sta: iwl_mac_data_sta struct with most config data + * @ctwin: client traffic window in TU (period after TBTT when GO is present). + * 0 indicates that there is no CT window. + */ +struct iwl_mac_data_p2p_sta { + struct iwl_mac_data_sta sta; + __le32 ctwin; +} __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */ + +/** + * struct iwl_mac_data_pibss - Pseudo IBSS config data + * @stats_interval: interval in TU between statistics notifications to host. + */ +struct iwl_mac_data_pibss { + __le32 stats_interval; +} __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */ + +/* + * struct iwl_mac_data_p2p_dev - configuration data for the P2P Device MAC + * context. + * @is_disc_extended: if set to true, P2P Device discoverability is enabled on + * other channels as well. This should be to true only in case that the + * device is discoverable and there is an active GO. Note that setting this + * field when not needed, will increase the number of interrupts and have + * effect on the platform power, as this setting opens the Rx filters on + * all macs. + */ +struct iwl_mac_data_p2p_dev { + __le32 is_disc_extended; +} __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */ + +/** + * enum iwl_mac_filter_flags - MAC context filter flags + * @MAC_FILTER_IN_PROMISC: accept all data frames + * @MAC_FILTER_IN_CONTROL_AND_MGMT: pass all mangement and + * control frames to the host + * @MAC_FILTER_ACCEPT_GRP: accept multicast frames + * @MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames + * @MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames + * @MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host + * (in station mode when associated) + * @MAC_FILTER_OUT_BCAST: filter out all broadcast frames + * @MAC_FILTER_IN_CRC32: extract FCS and append it to frames + * @MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host + */ +enum iwl_mac_filter_flags { + MAC_FILTER_IN_PROMISC = BIT(0), + MAC_FILTER_IN_CONTROL_AND_MGMT = BIT(1), + MAC_FILTER_ACCEPT_GRP = BIT(2), + MAC_FILTER_DIS_DECRYPT = BIT(3), + MAC_FILTER_DIS_GRP_DECRYPT = BIT(4), + MAC_FILTER_IN_BEACON = BIT(6), + MAC_FILTER_OUT_BCAST = BIT(8), + MAC_FILTER_IN_CRC32 = BIT(11), + MAC_FILTER_IN_PROBE_REQUEST = BIT(12), +}; + +/** + * enum iwl_mac_qos_flags - QoS flags + * @MAC_QOS_FLG_UPDATE_EDCA: ? + * @MAC_QOS_FLG_TGN: HT is enabled + * @MAC_QOS_FLG_TXOP_TYPE: ? + * + */ +enum iwl_mac_qos_flags { + MAC_QOS_FLG_UPDATE_EDCA = BIT(0), + MAC_QOS_FLG_TGN = BIT(1), + MAC_QOS_FLG_TXOP_TYPE = BIT(4), +}; + +/** + * struct iwl_ac_qos - QOS timing params for MAC_CONTEXT_CMD + * @cw_min: Contention window, start value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x0f. + * @cw_max: Contention window, max value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x3f. + * @aifsn: Number of slots in Arbitration Interframe Space (before + * performing random backoff timing prior to Tx). Device default 1. + * @fifos_mask: FIFOs used by this MAC for this AC + * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. + * + * One instance of this config struct for each of 4 EDCA access categories + * in struct iwl_qosparam_cmd. + * + * Device will automatically increase contention window by (2*CW) + 1 for each + * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW + * value, to cap the CW value. + */ +struct iwl_ac_qos { + __le16 cw_min; + __le16 cw_max; + u8 aifsn; + u8 fifos_mask; + __le16 edca_txop; +} __packed; /* AC_QOS_API_S_VER_2 */ + +/** + * struct iwl_mac_ctx_cmd - command structure to configure MAC contexts + * ( MAC_CONTEXT_CMD = 0x28 ) + * @id_and_color: ID and color of the MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @mac_type: one of FW_MAC_TYPE_* + * @tsd_id: TSF HW timer, one of TSF_ID_* + * @node_addr: MAC address + * @bssid_addr: BSSID + * @cck_rates: basic rates available for CCK + * @ofdm_rates: basic rates available for OFDM + * @protection_flags: combination of MAC_PROT_FLG_FLAG_* + * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise + * @short_slot: 0x10 for enabling short slots, 0 otherwise + * @filter_flags: combination of MAC_FILTER_* + * @qos_flags: from MAC_QOS_FLG_* + * @ac: one iwl_mac_qos configuration for each AC + * @mac_specific: one of struct iwl_mac_data_*, according to mac_type + */ +struct iwl_mac_ctx_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + /* MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */ + __le32 mac_type; + __le32 tsf_id; + u8 node_addr[6]; + __le16 reserved_for_node_addr; + u8 bssid_addr[6]; + __le16 reserved_for_bssid_addr; + __le32 cck_rates; + __le32 ofdm_rates; + __le32 protection_flags; + __le32 cck_short_preamble; + __le32 short_slot; + __le32 filter_flags; + /* MAC_QOS_PARAM_API_S_VER_1 */ + __le32 qos_flags; + struct iwl_ac_qos ac[AC_NUM+1]; + /* MAC_CONTEXT_COMMON_DATA_API_S */ + union { + struct iwl_mac_data_ap ap; + struct iwl_mac_data_go go; + struct iwl_mac_data_sta sta; + struct iwl_mac_data_p2p_sta p2p_sta; + struct iwl_mac_data_p2p_dev p2p_dev; + struct iwl_mac_data_pibss pibss; + struct iwl_mac_data_ibss ibss; + }; +} __packed; /* MAC_CONTEXT_CMD_API_S_VER_1 */ + +static inline u32 iwl_mvm_reciprocal(u32 v) +{ + if (!v) + return 0; + return 0xFFFFFFFF / v; +} + +#endif /* __fw_api_mac_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h new file mode 100644 index 0000000..be36b76 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -0,0 +1,140 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __fw_api_power_h__ +#define __fw_api_power_h__ + +/* Power Management Commands, Responses, Notifications */ + +/** + * enum iwl_scan_flags - masks for power table command flags + * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, + * '1' Driver enables PM (use rest of parameters) + * @POWER_FLAGS_SLEEP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, + * '1' PM could sleep over DTIM till listen Interval. + * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. + * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all + * access categories are both delivery and trigger enabled. + * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and + * PBW Snoozing enabled + * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask +*/ +enum iwl_power_flags { + POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(0), + POWER_FLAGS_SLEEP_OVER_DTIM_MSK = BIT(1), + POWER_FLAGS_LPRX_ENA_MSK = BIT(2), + POWER_FLAGS_SNOOZE_ENA_MSK = BIT(3), + POWER_FLAGS_BT_SCO_ENA = BIT(4), + POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(5) +}; + +/** + * struct iwl_powertable_cmd - Power Table Command + * POWER_TABLE_CMD = 0x77 (command, has simple generic response) + * + * @id_and_color: MAC contex identifier + * @action: Action on context - no action, add new, + * modify existent, remove + * @flags: Power table command flags from POWER_FLAGS_* + * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. + * Minimum allowed:- 3 * DTIM + * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to + * PSM transition - legacy PM + * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to + * PSM transition - legacy PM + * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to + * PSM transition - uAPSD + * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to + * PSM transition - uAPSD + * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. + * Default: 80dbm + * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set + * @snooze_interval: TBD + * @snooze_window: TBD + * @snooze_step: TBD + * @qndp_tid: TBD + * @uapsd_ac_flags: TBD + * @uapsd_max_sp: TBD + */ +struct iwl_powertable_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + __le16 flags; + u8 reserved; + __le16 keep_alive_seconds; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 rx_data_timeout_uapsd; + __le32 tx_data_timeout_uapsd; + u8 lprx_rssi_threshold; + u8 num_skip_dtim; + __le16 snooze_interval; + __le16 snooze_window; + u8 snooze_step; + u8 qndp_tid; + u8 uapsd_ac_flags; + u8 uapsd_max_sp; +} __packed; + +#endif diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h new file mode 100644 index 0000000..aa3474d --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h @@ -0,0 +1,312 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_rs_h__ +#define __fw_api_rs_h__ + +#include "fw-api-mac.h" + +/* + * These serve as indexes into + * struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT]; + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_LAST_NON_HT_RATE = IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, + IWL_RATE_COUNT_LEGACY = IWL_LAST_NON_HT_RATE + 1, + IWL_RATE_COUNT, +}; + +#define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX) + +/* fw API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, +}; + +/* + * rate_n_flags bit fields + * + * The 32-bit value has different layouts in the low 8 bites depending on the + * format. There are three formats, HT, VHT and legacy (11abg, with subformats + * for CCK and OFDM). + * + * High-throughput (HT) rate format + * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) + * Very High-throughput (VHT) rate format + * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) + * Legacy OFDM rate format for bits 7:0 + * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) + * Legacy CCK rate format for bits 7:0: + * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) + */ + +/* Bit 8: (1) HT format, (0) legacy or VHT format */ +#define RATE_MCS_HT_POS 8 +#define RATE_MCS_HT_MSK (1 << RATE_MCS_HT_POS) + +/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +#define RATE_MCS_CCK_POS 9 +#define RATE_MCS_CCK_MSK (1 << RATE_MCS_CCK_POS) + +/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ +#define RATE_MCS_VHT_POS 26 +#define RATE_MCS_VHT_MSK (1 << RATE_MCS_VHT_POS) + + +/* + * High-throughput (HT) rate format for bits 7:0 + * + * 2-0: MCS rate base + * 0) 6 Mbps + * 1) 12 Mbps + * 2) 18 Mbps + * 3) 24 Mbps + * 4) 36 Mbps + * 5) 48 Mbps + * 6) 54 Mbps + * 7) 60 Mbps + * 4-3: 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data + * (bits 7-6 are zero) + * + * Together the low 5 bits work out to the MCS index because we don't + * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two + * streams and 16-23 have three streams. We could also support MCS 32 + * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) + */ +#define RATE_HT_MCS_RATE_CODE_MSK 0x7 + +/* Bit 10: (1) Use Green Field preamble */ +#define RATE_HT_MCS_GF_POS 10 +#define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS) + +#define RATE_HT_MCS_INDEX_MSK 0x3f + +/* + * Very High-throughput (VHT) rate format for bits 7:0 + * + * 3-0: VHT MCS (0-9) + * 5-4: number of streams - 1: + * 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + */ + +/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ +#define RATE_VHT_MCS_RATE_CODE_MSK 0xf +#define RATE_VHT_MCS_NSS_POS 4 +#define RATE_VHT_MCS_NSS_MSK (3 << RATE_VHT_MCS_NSS_POS) + +/* + * Legacy OFDM rate format for bits 7:0 + * + * 3-0: 0xD) 6 Mbps + * 0xF) 9 Mbps + * 0x5) 12 Mbps + * 0x7) 18 Mbps + * 0x9) 24 Mbps + * 0xB) 36 Mbps + * 0x1) 48 Mbps + * 0x3) 54 Mbps + * (bits 7-4 are 0) + * + * Legacy CCK rate format for bits 7:0: + * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): + * + * 6-0: 10) 1 Mbps + * 20) 2 Mbps + * 55) 5.5 Mbps + * 110) 11 Mbps + * (bit 7 is 0) + */ +#define RATE_LEGACY_RATE_MSK 0xff + + +/* + * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz + * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT + */ +#define RATE_MCS_CHAN_WIDTH_POS 11 +#define RATE_MCS_CHAN_WIDTH_MSK (3 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_20 (0 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_40 (1 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_80 (2 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_160 (3 << RATE_MCS_CHAN_WIDTH_POS) + +/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +#define RATE_MCS_SGI_POS 13 +#define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS) + +/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ +#define RATE_MCS_ANT_POS 14 +#define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_C_MSK (4 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \ + RATE_MCS_ANT_B_MSK) +#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | \ + RATE_MCS_ANT_C_MSK) +#define RATE_MCS_ANT_MSK RATE_MCS_ANT_ABC_MSK +#define RATE_MCS_ANT_NUM 3 + +/* Bit 17-18: (0) SS, (1) SS*2 */ +#define RATE_MCS_STBC_POS 17 +#define RATE_MCS_STBC_MSK (1 << RATE_MCS_STBC_POS) + +/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ +#define RATE_MCS_BF_POS 19 +#define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS) + +/* Bit 20: (0) ZLF is off, (1) ZLF is on */ +#define RATE_MCS_ZLF_POS 20 +#define RATE_MCS_ZLF_MSK (1 << RATE_MCS_ZLF_POS) + +/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ +#define RATE_MCS_DUP_POS 24 +#define RATE_MCS_DUP_MSK (3 << RATE_MCS_DUP_POS) + +/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ +#define RATE_MCS_LDPC_POS 27 +#define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS) + + +/* Link Quality definitions */ + +/* # entries in rate scale table to support Tx retries */ +#define LQ_MAX_RETRY_NUM 16 + +/* Link quality command flags, only this one is available */ +#define LQ_FLAG_SET_STA_TLC_RTS_MSK BIT(0) + +/** + * struct iwl_lq_cmd - link quality command + * @sta_id: station to update + * @control: not used + * @flags: combination of LQ_FLAG_* + * @mimo_delim: the first SISO index in rs_table, which separates MIMO + * and SISO rates + * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD). + * Should be ANT_[ABC] + * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC] + * @initial_rate_index: first index from rs_table per AC category + * @agg_time_limit: aggregation max time threshold in usec/100, meaning + * value of 100 is one usec. Range is 100 to 8000 + * @agg_disable_start_th: try-count threshold for starting aggregation. + * If a frame has higher try-count, it should not be selected for + * starting an aggregation sequence. + * @agg_frame_cnt_limit: max frame count in an aggregation. + * 0: no limit + * 1: no aggregation (one frame per aggregation) + * 2 - 0x3f: maximal number of frames (up to 3f == 63) + * @rs_table: array of rates for each TX try, each is rate_n_flags, + * meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP + * @bf_params: beam forming params, currently not used + */ +struct iwl_lq_cmd { + u8 sta_id; + u8 reserved1; + u16 control; + /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */ + u8 flags; + u8 mimo_delim; + u8 single_stream_ant_msk; + u8 dual_stream_ant_msk; + u8 initial_rate_index[AC_NUM]; + /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */ + __le16 agg_time_limit; + u8 agg_disable_start_th; + u8 agg_frame_cnt_limit; + __le32 reserved2; + __le32 rs_table[LQ_MAX_RETRY_NUM]; + __le32 bf_params; +}; /* LINK_QUALITY_CMD_API_S_VER_1 */ +#endif /* __fw_api_rs_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h new file mode 100644 index 0000000..670ac8f --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -0,0 +1,561 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __fw_api_scan_h__ +#define __fw_api_scan_h__ + +#include "fw-api.h" + +/* Scan Commands, Responses, Notifications */ + +/* Masks for iwl_scan_channel.type flags */ +#define SCAN_CHANNEL_TYPE_PASSIVE 0 +#define SCAN_CHANNEL_TYPE_ACTIVE BIT(0) +#define SCAN_CHANNEL_NARROW_BAND BIT(22) + +/* Max number of IEs for direct SSID scans in a command */ +#define PROBE_OPTION_MAX 20 + +/** + * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table + * @channel: band is selected by iwl_scan_cmd "flags" field + * @tx_gain: gain for analog radio + * @dsp_atten: gain for DSP + * @active_dwell: dwell time for active scan in TU, typically 5-50 + * @passive_dwell: dwell time for passive scan in TU, typically 20-500 + * @type: type is broken down to these bits: + * bit 0: 0 = passive, 1 = active + * bits 1-20: SSID direct bit map. If any of these bits is set then + * the corresponding SSID IE is transmitted in probe request + * (bit i adds IE in position i to the probe request) + * bit 22: channel width, 0 = regular, 1 = TGj narrow channel + * + * @iteration_count: + * @iteration_interval: + * This struct is used once for each channel in the scan list. + * Each channel can independently select: + * 1) SSID for directed active scans + * 2) Txpower setting (for rate specified within Tx command) + * 3) How long to stay on-channel (behavior may be modified by quiet_time, + * quiet_plcp_th, good_CRC_th) + * + * To avoid uCode errors, make sure the following are true (see comments + * under struct iwl_scan_cmd about max_out_time and quiet_time): + * 1) If using passive_dwell (i.e. passive_dwell != 0): + * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) + * 2) quiet_time <= active_dwell + * 3) If restricting off-channel time (i.e. max_out_time !=0): + * passive_dwell < max_out_time + * active_dwell < max_out_time + */ +struct iwl_scan_channel { + __le32 type; + __le16 channel; + __le16 iteration_count; + __le32 iteration_interval; + __le16 active_dwell; + __le16 passive_dwell; +} __packed; /* SCAN_CHANNEL_CONTROL_API_S_VER_1 */ + +/** + * struct iwl_ssid_ie - directed scan network information element + * + * Up to 20 of these may appear in REPLY_SCAN_CMD, + * selected by "type" bit field in struct iwl_scan_channel; + * each channel may select different ssids from among the 20 entries. + * SSID IEs get transmitted in reverse order of entry. + */ +struct iwl_ssid_ie { + u8 id; + u8 len; + u8 ssid[IEEE80211_MAX_SSID_LEN]; +} __packed; /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */ + +/** + * iwl_scan_flags - masks for scan command flags + *@SCAN_FLAGS_PERIODIC_SCAN: + *@SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX: + *@SCAN_FLAGS_DELAYED_SCAN_LOWBAND: + *@SCAN_FLAGS_DELAYED_SCAN_HIGHBAND: + *@SCAN_FLAGS_FRAGMENTED_SCAN: + */ +enum iwl_scan_flags { + SCAN_FLAGS_PERIODIC_SCAN = BIT(0), + SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX = BIT(1), + SCAN_FLAGS_DELAYED_SCAN_LOWBAND = BIT(2), + SCAN_FLAGS_DELAYED_SCAN_HIGHBAND = BIT(3), + SCAN_FLAGS_FRAGMENTED_SCAN = BIT(4), +}; + +/** + * enum iwl_scan_type - Scan types for scan command + * @SCAN_TYPE_FORCED: + * @SCAN_TYPE_BACKGROUND: + * @SCAN_TYPE_OS: + * @SCAN_TYPE_ROAMING: + * @SCAN_TYPE_ACTION: + * @SCAN_TYPE_DISCOVERY: + * @SCAN_TYPE_DISCOVERY_FORCED: + */ +enum iwl_scan_type { + SCAN_TYPE_FORCED = 0, + SCAN_TYPE_BACKGROUND = 1, + SCAN_TYPE_OS = 2, + SCAN_TYPE_ROAMING = 3, + SCAN_TYPE_ACTION = 4, + SCAN_TYPE_DISCOVERY = 5, + SCAN_TYPE_DISCOVERY_FORCED = 6, +}; /* SCAN_ACTIVITY_TYPE_E_VER_1 */ + +/* Maximal number of channels to scan */ +#define MAX_NUM_SCAN_CHANNELS 0x24 + +/** + * struct iwl_scan_cmd - scan request command + * ( SCAN_REQUEST_CMD = 0x80 ) + * @len: command length in bytes + * @scan_flags: scan flags from SCAN_FLAGS_* + * @channel_count: num of channels in channel list (1 - MAX_NUM_SCAN_CHANNELS) + * @quiet_time: in msecs, dwell this time for active scan on quiet channels + * @quiet_plcp_th: quiet PLCP threshold (channel is quiet if less than + * this number of packets were received (typically 1) + * @passive2active: is auto switching from passive to active allowed (0 or 1) + * @rxchain_sel_flags: RXON_RX_CHAIN_* + * @max_out_time: in usecs, max out of serving channel time + * @suspend_time: how long to pause scan when returning to service channel: + * bits 0-19: beacon interal in usecs (suspend before executing) + * bits 20-23: reserved + * bits 24-31: number of beacons (suspend between channels) + * @rxon_flags: RXON_FLG_* + * @filter_flags: RXON_FILTER_* + * @tx_cmd: for active scans (zero for passive), w/o payload, + * no RS so specify TX rate + * @direct_scan: direct scan SSIDs + * @type: one of SCAN_TYPE_* + * @repeats: how many time to repeat the scan + */ +struct iwl_scan_cmd { + __le16 len; + u8 scan_flags; + u8 channel_count; + __le16 quiet_time; + __le16 quiet_plcp_th; + __le16 passive2active; + __le16 rxchain_sel_flags; + __le32 max_out_time; + __le32 suspend_time; + /* RX_ON_FLAGS_API_S_VER_1 */ + __le32 rxon_flags; + __le32 filter_flags; + struct iwl_tx_cmd tx_cmd; + struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; + __le32 type; + __le32 repeats; + + /* + * Probe request frame, followed by channel list. + * + * Size of probe request frame is specified by byte count in tx_cmd. + * Channel list follows immediately after probe request frame. + * Number of channels in list is specified by channel_count. + * Each channel in list is of type: + * + * struct iwl_scan_channel channels[0]; + * + * NOTE: Only one band of channels can be scanned per pass. You + * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait + * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) + * before requesting another scan. + */ + u8 data[0]; +} __packed; /* SCAN_REQUEST_FIXED_PART_API_S_VER_5 */ + +/* Response to scan request contains only status with one of these values */ +#define SCAN_RESPONSE_OK 0x1 +#define SCAN_RESPONSE_ERROR 0x2 + +/* + * SCAN_ABORT_CMD = 0x81 + * When scan abort is requested, the command has no fields except the common + * header. The response contains only a status with one of these values. + */ +#define SCAN_ABORT_POSSIBLE 0x1 +#define SCAN_ABORT_IGNORED 0x2 /* no pending scans */ + +/* TODO: complete documentation */ +#define SCAN_OWNER_STATUS 0x1 +#define MEASURE_OWNER_STATUS 0x2 + +/** + * struct iwl_scan_start_notif - notifies start of scan in the device + * ( SCAN_START_NOTIFICATION = 0x82 ) + * @tsf_low: TSF timer (lower half) in usecs + * @tsf_high: TSF timer (higher half) in usecs + * @beacon_timer: structured as follows: + * bits 0:19 - beacon interval in usecs + * bits 20:23 - reserved (0) + * bits 24:31 - number of beacons + * @channel: which channel is scanned + * @band: 0 for 5.2 GHz, 1 for 2.4 GHz + * @status: one of *_OWNER_STATUS + */ +struct iwl_scan_start_notif { + __le32 tsf_low; + __le32 tsf_high; + __le32 beacon_timer; + u8 channel; + u8 band; + u8 reserved[2]; + __le32 status; +} __packed; /* SCAN_START_NTF_API_S_VER_1 */ + +/* scan results probe_status first bit indicates success */ +#define SCAN_PROBE_STATUS_OK 0 +#define SCAN_PROBE_STATUS_TX_FAILED BIT(0) +/* error statuses combined with TX_FAILED */ +#define SCAN_PROBE_STATUS_FAIL_TTL BIT(1) +#define SCAN_PROBE_STATUS_FAIL_BT BIT(2) + +/* How many statistics are gathered for each channel */ +#define SCAN_RESULTS_STATISTICS 1 + +/** + * enum iwl_scan_complete_status - status codes for scan complete notifications + * @SCAN_COMP_STATUS_OK: scan completed successfully + * @SCAN_COMP_STATUS_ABORT: scan was aborted by user + * @SCAN_COMP_STATUS_ERR_SLEEP: sending null sleep packet failed + * @SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT: timeout before channel is ready + * @SCAN_COMP_STATUS_ERR_PROBE: sending probe request failed + * @SCAN_COMP_STATUS_ERR_WAKEUP: sending null wakeup packet failed + * @SCAN_COMP_STATUS_ERR_ANTENNAS: invalid antennas chosen at scan command + * @SCAN_COMP_STATUS_ERR_INTERNAL: internal error caused scan abort + * @SCAN_COMP_STATUS_ERR_COEX: medium was lost ot WiMax + * @SCAN_COMP_STATUS_P2P_ACTION_OK: P2P public action frame TX was successful + * (not an error!) + * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repeatition the driver + * asked for + * @SCAN_COMP_STATUS_ERR_ALLOC_TE: scan could not allocate time events +*/ +enum iwl_scan_complete_status { + SCAN_COMP_STATUS_OK = 0x1, + SCAN_COMP_STATUS_ABORT = 0x2, + SCAN_COMP_STATUS_ERR_SLEEP = 0x3, + SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT = 0x4, + SCAN_COMP_STATUS_ERR_PROBE = 0x5, + SCAN_COMP_STATUS_ERR_WAKEUP = 0x6, + SCAN_COMP_STATUS_ERR_ANTENNAS = 0x7, + SCAN_COMP_STATUS_ERR_INTERNAL = 0x8, + SCAN_COMP_STATUS_ERR_COEX = 0x9, + SCAN_COMP_STATUS_P2P_ACTION_OK = 0xA, + SCAN_COMP_STATUS_ITERATION_END = 0x0B, + SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, +}; + +/** + * struct iwl_scan_results_notif - scan results for one channel + * ( SCAN_RESULTS_NOTIFICATION = 0x83 ) + * @channel: which channel the results are from + * @band: 0 for 5.2 GHz, 1 for 2.4 GHz + * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request + * @num_probe_not_sent: # of request that weren't sent due to not enough time + * @duration: duration spent in channel, in usecs + * @statistics: statistics gathered for this channel + */ +struct iwl_scan_results_notif { + u8 channel; + u8 band; + u8 probe_status; + u8 num_probe_not_sent; + __le32 duration; + __le32 statistics[SCAN_RESULTS_STATISTICS]; +} __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */ + +/** + * struct iwl_scan_complete_notif - notifies end of scanning (all channels) + * ( SCAN_COMPLETE_NOTIFICATION = 0x84 ) + * @scanned_channels: number of channels scanned (and number of valid results) + * @status: one of SCAN_COMP_STATUS_* + * @bt_status: BT on/off status + * @last_channel: last channel that was scanned + * @tsf_low: TSF timer (lower half) in usecs + * @tsf_high: TSF timer (higher half) in usecs + * @results: all scan results, only "scanned_channels" of them are valid + */ +struct iwl_scan_complete_notif { + u8 scanned_channels; + u8 status; + u8 bt_status; + u8 last_channel; + __le32 tsf_low; + __le32 tsf_high; + struct iwl_scan_results_notif results[MAX_NUM_SCAN_CHANNELS]; +} __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */ + +/* scan offload */ +#define IWL_MAX_SCAN_CHANNELS 40 +#define IWL_SCAN_MAX_BLACKLIST_LEN 64 +#define IWL_SCAN_MAX_PROFILES 11 +#define SCAN_OFFLOAD_PROBE_REQ_SIZE 512 + +/* Default watchdog (in MS) for scheduled scan iteration */ +#define IWL_SCHED_SCAN_WATCHDOG cpu_to_le16(15000) + +#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) +#define CAN_ABORT_STATUS 1 + +#define IWL_FULL_SCAN_MULTIPLIER 5 +#define IWL_FAST_SCHED_SCAN_ITERATIONS 3 + +/** + * struct iwl_scan_offload_cmd - SCAN_REQUEST_FIXED_PART_API_S_VER_6 + * @scan_flags: see enum iwl_scan_flags + * @channel_count: channels in channel list + * @quiet_time: dwell time, in milisiconds, on quiet channel + * @quiet_plcp_th: quiet channel num of packets threshold + * @good_CRC_th: passive to active promotion threshold + * @rx_chain: RXON rx chain. + * @max_out_time: max uSec to be out of assoceated channel + * @suspend_time: pause scan this long when returning to service channel + * @flags: RXON flags + * @filter_flags: RXONfilter + * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz. + * @direct_scan: list of SSIDs for directed active scan + * @scan_type: see enum iwl_scan_type. + * @rep_count: repetition count for each scheduled scan iteration. + */ +struct iwl_scan_offload_cmd { + __le16 len; + u8 scan_flags; + u8 channel_count; + __le16 quiet_time; + __le16 quiet_plcp_th; + __le16 good_CRC_th; + __le16 rx_chain; + __le32 max_out_time; + __le32 suspend_time; + /* RX_ON_FLAGS_API_S_VER_1 */ + __le32 flags; + __le32 filter_flags; + struct iwl_tx_cmd tx_cmd[2]; + /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */ + struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; + __le32 scan_type; + __le32 rep_count; +} __packed; + +enum iwl_scan_offload_channel_flags { + IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE = BIT(0), + IWL_SCAN_OFFLOAD_CHANNEL_NARROW = BIT(22), + IWL_SCAN_OFFLOAD_CHANNEL_FULL = BIT(24), + IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL = BIT(25), +}; + +/** + * iwl_scan_channel_cfg - SCAN_CHANNEL_CFG_S + * @type: bitmap - see enum iwl_scan_offload_channel_flags. + * 0: passive (0) or active (1) scan. + * 1-20: directed scan to i'th ssid. + * 22: channel width configuation - 1 for narrow. + * 24: full scan. + * 25: partial scan. + * @channel_number: channel number 1-13 etc. + * @iter_count: repetition count for the channel. + * @iter_interval: interval between two innteration on one channel. + * @dwell_time: entry 0 - active scan, entry 1 - passive scan. + */ +struct iwl_scan_channel_cfg { + __le32 type[IWL_MAX_SCAN_CHANNELS]; + __le16 channel_number[IWL_MAX_SCAN_CHANNELS]; + __le16 iter_count[IWL_MAX_SCAN_CHANNELS]; + __le32 iter_interval[IWL_MAX_SCAN_CHANNELS]; + u8 dwell_time[IWL_MAX_SCAN_CHANNELS][2]; +} __packed; + +/** + * iwl_scan_offload_cfg - SCAN_OFFLOAD_CONFIG_API_S + * @scan_cmd: scan command fixed part + * @channel_cfg: scan channel configuration + * @data: probe request frames (one per band) + */ +struct iwl_scan_offload_cfg { + struct iwl_scan_offload_cmd scan_cmd; + struct iwl_scan_channel_cfg channel_cfg; + u8 data[0]; +} __packed; + +/** + * iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S + * @ssid: MAC address to filter out + * @reported_rssi: AP rssi reported to the host + */ +struct iwl_scan_offload_blacklist { + u8 ssid[ETH_ALEN]; + u8 reported_rssi; + u8 reserved; +} __packed; + +enum iwl_scan_offload_network_type { + IWL_NETWORK_TYPE_BSS = 1, + IWL_NETWORK_TYPE_IBSS = 2, + IWL_NETWORK_TYPE_ANY = 3, +}; + +enum iwl_scan_offload_band_selection { + IWL_SCAN_OFFLOAD_SELECT_2_4 = 0x4, + IWL_SCAN_OFFLOAD_SELECT_5_2 = 0x8, + IWL_SCAN_OFFLOAD_SELECT_ANY = 0xc, +}; + +/** + * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S + * @ssid_index: index to ssid list in fixed part + * @unicast_cipher: encryption olgorithm to match - bitmap + * @aut_alg: authentication olgorithm to match - bitmap + * @network_type: enum iwl_scan_offload_network_type + * @band_selection: enum iwl_scan_offload_band_selection + */ +struct iwl_scan_offload_profile { + u8 ssid_index; + u8 unicast_cipher; + u8 auth_alg; + u8 network_type; + u8 band_selection; + u8 reserved[3]; +} __packed; + +/** + * iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 + * @blaclist: AP list to filter off from scan results + * @profiles: profiles to search for match + * @blacklist_len: length of blacklist + * @num_profiles: num of profiles in the list + */ +struct iwl_scan_offload_profile_cfg { + struct iwl_scan_offload_blacklist blacklist[IWL_SCAN_MAX_BLACKLIST_LEN]; + struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES]; + u8 blacklist_len; + u8 num_profiles; + u8 reserved[2]; +} __packed; + +/** + * iwl_scan_offload_schedule - schedule of scan offload + * @delay: delay between iterations, in seconds. + * @iterations: num of scan iterations + * @full_scan_mul: number of partial scans before each full scan + */ +struct iwl_scan_offload_schedule { + u16 delay; + u8 iterations; + u8 full_scan_mul; +} __packed; + +/* + * iwl_scan_offload_flags + * + * IWL_SCAN_OFFLOAD_FLAG_FILTER_SSID: filter mode - upload every beacon or match + * ssid list. + * IWL_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL: add cached channels to partial scan. + * IWL_SCAN_OFFLOAD_FLAG_ENERGY_SCAN: use energy based scan before partial scan + * on A band. + */ +enum iwl_scan_offload_flags { + IWL_SCAN_OFFLOAD_FLAG_FILTER_SSID = BIT(0), + IWL_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL = BIT(2), + IWL_SCAN_OFFLOAD_FLAG_ENERGY_SCAN = BIT(3), +}; + +/** + * iwl_scan_offload_req - scan offload request command + * @flags: bitmap - enum iwl_scan_offload_flags. + * @watchdog: maximum scan duration in TU. + * @delay: delay in seconds before first iteration. + * @schedule_line: scan offload schedule, for fast and regular scan. + */ +struct iwl_scan_offload_req { + __le16 flags; + __le16 watchdog; + __le16 delay; + __le16 reserved; + struct iwl_scan_offload_schedule schedule_line[2]; +} __packed; + +enum iwl_scan_offload_compleate_status { + IWL_SCAN_OFFLOAD_COMPLETED = 1, + IWL_SCAN_OFFLOAD_ABORTED = 2, +}; + +/** + * iwl_scan_offload_complete - SCAN_OFFLOAD_COMPLETE_NTF_API_S_VER_1 + * @last_schedule_line: last schedule line executed (fast or regular) + * @last_schedule_iteration: last scan iteration executed before scan abort + * @status: enum iwl_scan_offload_compleate_status + */ +struct iwl_scan_offload_complete { + u8 last_schedule_line; + u8 last_schedule_iteration; + u8 status; + u8 reserved; +} __packed; + +#endif diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h new file mode 100644 index 0000000..0acb53d --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h @@ -0,0 +1,380 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_sta_h__ +#define __fw_api_sta_h__ + +/** + * enum iwl_sta_flags - flags for the ADD_STA host command + * @STA_FLG_REDUCED_TX_PWR_CTRL: + * @STA_FLG_REDUCED_TX_PWR_DATA: + * @STA_FLG_FLG_ANT_MSK: Antenna selection + * @STA_FLG_PS: set if STA is in Power Save + * @STA_FLG_INVALID: set if STA is invalid + * @STA_FLG_DLP_EN: Direct Link Protocol is enabled + * @STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs + * @STA_FLG_DRAIN_FLOW: drain flow + * @STA_FLG_PAN: STA is for PAN interface + * @STA_FLG_CLASS_AUTH: + * @STA_FLG_CLASS_ASSOC: + * @STA_FLG_CLASS_MIMO_PROT: + * @STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU + * @STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation + * @STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is + * initialised by driver and can be updated by fw upon reception of + * action frames that can change the channel width. When cleared the fw + * will send all the frames in 20MHz even when FAT channel is requested. + * @STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the + * driver and can be updated by fw upon reception of action frames. + * @STA_FLG_MFP_EN: Management Frame Protection + */ +enum iwl_sta_flags { + STA_FLG_REDUCED_TX_PWR_CTRL = BIT(3), + STA_FLG_REDUCED_TX_PWR_DATA = BIT(6), + + STA_FLG_FLG_ANT_A = (1 << 4), + STA_FLG_FLG_ANT_B = (2 << 4), + STA_FLG_FLG_ANT_MSK = (STA_FLG_FLG_ANT_A | + STA_FLG_FLG_ANT_B), + + STA_FLG_PS = BIT(8), + STA_FLG_INVALID = BIT(9), + STA_FLG_DLP_EN = BIT(10), + STA_FLG_SET_ALL_KEYS = BIT(11), + STA_FLG_DRAIN_FLOW = BIT(12), + STA_FLG_PAN = BIT(13), + STA_FLG_CLASS_AUTH = BIT(14), + STA_FLG_CLASS_ASSOC = BIT(15), + STA_FLG_RTS_MIMO_PROT = BIT(17), + + STA_FLG_MAX_AGG_SIZE_SHIFT = 19, + STA_FLG_MAX_AGG_SIZE_8K = (0 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_16K = (1 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_32K = (2 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_64K = (3 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_128K = (4 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_256K = (5 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_512K = (6 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_1024K = (7 << STA_FLG_MAX_AGG_SIZE_SHIFT), + STA_FLG_MAX_AGG_SIZE_MSK = (7 << STA_FLG_MAX_AGG_SIZE_SHIFT), + + STA_FLG_AGG_MPDU_DENS_SHIFT = 23, + STA_FLG_AGG_MPDU_DENS_2US = (4 << STA_FLG_AGG_MPDU_DENS_SHIFT), + STA_FLG_AGG_MPDU_DENS_4US = (5 << STA_FLG_AGG_MPDU_DENS_SHIFT), + STA_FLG_AGG_MPDU_DENS_8US = (6 << STA_FLG_AGG_MPDU_DENS_SHIFT), + STA_FLG_AGG_MPDU_DENS_16US = (7 << STA_FLG_AGG_MPDU_DENS_SHIFT), + STA_FLG_AGG_MPDU_DENS_MSK = (7 << STA_FLG_AGG_MPDU_DENS_SHIFT), + + STA_FLG_FAT_EN_20MHZ = (0 << 26), + STA_FLG_FAT_EN_40MHZ = (1 << 26), + STA_FLG_FAT_EN_80MHZ = (2 << 26), + STA_FLG_FAT_EN_160MHZ = (3 << 26), + STA_FLG_FAT_EN_MSK = (3 << 26), + + STA_FLG_MIMO_EN_SISO = (0 << 28), + STA_FLG_MIMO_EN_MIMO2 = (1 << 28), + STA_FLG_MIMO_EN_MIMO3 = (2 << 28), + STA_FLG_MIMO_EN_MSK = (3 << 28), +}; + +/** + * enum iwl_sta_key_flag - key flags for the ADD_STA host command + * @STA_KEY_FLG_EN_MSK: mask for encryption algorithm + * @STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from + * station info array (1 - n 1X mode) + * @STA_KEY_FLG_KEYID_MSK: the index of the key + * @STA_KEY_NOT_VALID: key is invalid + * @STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key + * @STA_KEY_MULTICAST: set for multical key + * @STA_KEY_MFP: key is used for Management Frame Protection + */ +enum iwl_sta_key_flag { + STA_KEY_FLG_NO_ENC = (0 << 0), + STA_KEY_FLG_WEP = (1 << 0), + STA_KEY_FLG_CCM = (2 << 0), + STA_KEY_FLG_TKIP = (3 << 0), + STA_KEY_FLG_CMAC = (6 << 0), + STA_KEY_FLG_ENC_UNKNOWN = (7 << 0), + STA_KEY_FLG_EN_MSK = (7 << 0), + + STA_KEY_FLG_WEP_KEY_MAP = BIT(3), + STA_KEY_FLG_KEYID_POS = 8, + STA_KEY_FLG_KEYID_MSK = (3 << STA_KEY_FLG_KEYID_POS), + STA_KEY_NOT_VALID = BIT(11), + STA_KEY_FLG_WEP_13BYTES = BIT(12), + STA_KEY_MULTICAST = BIT(14), + STA_KEY_MFP = BIT(15), +}; + +/** + * enum iwl_sta_modify_flag - indicate to the fw what flag are being changed + * @STA_MODIFY_KEY: this command modifies %key + * @STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx + * @STA_MODIFY_TX_RATE: unused + * @STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid + * @STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid + * @STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count + * @STA_MODIFY_PROT_TH: + * @STA_MODIFY_QUEUES: modify the queues used by this station + */ +enum iwl_sta_modify_flag { + STA_MODIFY_KEY = BIT(0), + STA_MODIFY_TID_DISABLE_TX = BIT(1), + STA_MODIFY_TX_RATE = BIT(2), + STA_MODIFY_ADD_BA_TID = BIT(3), + STA_MODIFY_REMOVE_BA_TID = BIT(4), + STA_MODIFY_SLEEPING_STA_TX_COUNT = BIT(5), + STA_MODIFY_PROT_TH = BIT(6), + STA_MODIFY_QUEUES = BIT(7), +}; + +#define STA_MODE_MODIFY 1 + +/** + * enum iwl_sta_sleep_flag - type of sleep of the station + * @STA_SLEEP_STATE_AWAKE: + * @STA_SLEEP_STATE_PS_POLL: + * @STA_SLEEP_STATE_UAPSD: + */ +enum iwl_sta_sleep_flag { + STA_SLEEP_STATE_AWAKE = 0, + STA_SLEEP_STATE_PS_POLL = BIT(0), + STA_SLEEP_STATE_UAPSD = BIT(1), +}; + +/* STA ID and color bits definitions */ +#define STA_ID_SEED (0x0f) +#define STA_ID_POS (0) +#define STA_ID_MSK (STA_ID_SEED << STA_ID_POS) + +#define STA_COLOR_SEED (0x7) +#define STA_COLOR_POS (4) +#define STA_COLOR_MSK (STA_COLOR_SEED << STA_COLOR_POS) + +#define STA_ID_N_COLOR_GET_COLOR(id_n_color) \ + (((id_n_color) & STA_COLOR_MSK) >> STA_COLOR_POS) +#define STA_ID_N_COLOR_GET_ID(id_n_color) \ + (((id_n_color) & STA_ID_MSK) >> STA_ID_POS) + +#define STA_KEY_MAX_NUM (16) +#define STA_KEY_IDX_INVALID (0xff) +#define STA_KEY_MAX_DATA_KEY_NUM (4) +#define IWL_MAX_GLOBAL_KEYS (4) +#define STA_KEY_LEN_WEP40 (5) +#define STA_KEY_LEN_WEP104 (13) + +/** + * struct iwl_mvm_keyinfo - key information + * @key_flags: type %iwl_sta_key_flag + * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection + * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx + * @key_offset: key offset in the fw's key table + * @key: 16-byte unicast decryption key + * @tx_secur_seq_cnt: initial RSC / PN needed for replay check + * @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only + * @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only + */ +struct iwl_mvm_keyinfo { + __le16 key_flags; + u8 tkip_rx_tsc_byte2; + u8 reserved1; + __le16 tkip_rx_ttak[5]; + u8 key_offset; + u8 reserved2; + u8 key[16]; + __le64 tx_secur_seq_cnt; + __le64 hw_tkip_mic_rx_key; + __le64 hw_tkip_mic_tx_key; +} __packed; + +/** + * struct iwl_mvm_add_sta_cmd - Add / modify a station in the fw's station table + * ( REPLY_ADD_STA = 0x18 ) + * @add_modify: 1: modify existing, 0: add new station + * @unicast_tx_key_id: unicast tx key id. Relevant only when unicast key sent + * @multicast_tx_key_id: multicast tx key id. Relevant only when multicast key + * sent + * @mac_id_n_color: the Mac context this station belongs to + * @addr[ETH_ALEN]: station's MAC address + * @sta_id: index of station in uCode's station table + * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave + * alone. 1 - modify, 0 - don't change. + * @key: look at %iwl_mvm_keyinfo + * @station_flags: look at %iwl_sta_flags + * @station_flags_msk: what of %station_flags have changed + * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable + * AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field. + * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) + * Set %STA_MODIFY_ADD_BA_TID to use this field, and also set + * add_immediate_ba_ssn. + * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx) + * Set %STA_MODIFY_REMOVE_BA_TID to use this field + * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with + * add_immediate_ba_tid. + * @sleep_tx_count: number of packets to transmit to station even though it is + * asleep. Used to synchronise PS-poll and u-APSD responses while ucode + * keeps track of STA sleep state. + * @sleep_state_flags: Look at %iwl_sta_sleep_flag. + * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP + * mac-addr. + * @beamform_flags: beam forming controls + * @tfd_queue_msk: tfd queues used by this station + * + * The device contains an internal table of per-station information, with info + * on security keys, aggregation parameters, and Tx rates for initial Tx + * attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD). + * + * ADD_STA sets up the table entry for one station, either creating a new + * entry, or modifying a pre-existing one. + */ +struct iwl_mvm_add_sta_cmd { + u8 add_modify; + u8 unicast_tx_key_id; + u8 multicast_tx_key_id; + u8 reserved1; + __le32 mac_id_n_color; + u8 addr[ETH_ALEN]; + __le16 reserved2; + u8 sta_id; + u8 modify_mask; + __le16 reserved3; + struct iwl_mvm_keyinfo key; + __le32 station_flags; + __le32 station_flags_msk; + __le16 tid_disable_tx; + __le16 reserved4; + u8 add_immediate_ba_tid; + u8 remove_immediate_ba_tid; + __le16 add_immediate_ba_ssn; + __le16 sleep_tx_count; + __le16 sleep_state_flags; + __le16 assoc_id; + __le16 beamform_flags; + __le32 tfd_queue_msk; +} __packed; /* ADD_STA_CMD_API_S_VER_5 */ + +/** + * enum iwl_mvm_add_sta_rsp_status - status in the response to ADD_STA command + * @ADD_STA_SUCCESS: operation was executed successfully + * @ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table + * @ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session + * @ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station that + * doesn't exist. + */ +enum iwl_mvm_add_sta_rsp_status { + ADD_STA_SUCCESS = 0x1, + ADD_STA_STATIONS_OVERLOAD = 0x2, + ADD_STA_IMMEDIATE_BA_FAILURE = 0x4, + ADD_STA_MODIFY_NON_EXISTING_STA = 0x8, +}; + +/** + * struct iwl_mvm_rm_sta_cmd - Add / modify a station in the fw's station table + * ( REMOVE_STA = 0x19 ) + * @sta_id: the station id of the station to be removed + */ +struct iwl_mvm_rm_sta_cmd { + u8 sta_id; + u8 reserved[3]; +} __packed; /* REMOVE_STA_CMD_API_S_VER_2 */ + +/** + * struct iwl_mvm_mgmt_mcast_key_cmd + * ( MGMT_MCAST_KEY = 0x1f ) + * @ctrl_flags: %iwl_sta_key_flag + * @IGTK: + * @K1: IGTK master key + * @K2: IGTK sub key + * @sta_id: station ID that support IGTK + * @key_id: + * @receive_seq_cnt: initial RSC/PN needed for replay check + */ +struct iwl_mvm_mgmt_mcast_key_cmd { + __le32 ctrl_flags; + u8 IGTK[16]; + u8 K1[16]; + u8 K2[16]; + __le32 key_id; + __le32 sta_id; + __le64 receive_seq_cnt; +} __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */ + +struct iwl_mvm_wep_key { + u8 key_index; + u8 key_offset; + __le16 reserved1; + u8 key_size; + u8 reserved2[3]; + u8 key[16]; +} __packed; + +struct iwl_mvm_wep_key_cmd { + __le32 mac_id_n_color; + u8 num_keys; + u8 decryption_type; + u8 flags; + u8 reserved; + struct iwl_mvm_wep_key wep_key[0]; +} __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */ + + +#endif /* __fw_api_sta_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h new file mode 100644 index 0000000..2677914 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h @@ -0,0 +1,580 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_tx_h__ +#define __fw_api_tx_h__ + +/** + * enum iwl_tx_flags - bitmasks for tx_flags in TX command + * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame + * @TX_CMD_FLG_ACK: expect ACK from receiving station + * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command. + * Otherwise, use rate_n_flags from the TX command + * @TX_CMD_FLG_BA: this frame is a block ack + * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected + * Must set TX_CMD_FLG_ACK with this flag. + * @TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection + * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence + * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence + * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC) + * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame + * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control. + * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command + * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU + * @TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame + * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame + * Should be set for beacons and probe responses + * @TX_CMD_FLG_CALIB: activate PA TX power calibrations + * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count + * @TX_CMD_FLG_AGG_START: allow this frame to start aggregation + * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header. + * Should be set for 26/30 length MAC headers + * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW + * @TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration + * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation + * @TX_CMD_FLG_CTS_ONLY: send CTS only, no data after that + * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id + * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped + * @TX_CMD_FLG_EXEC_PAPD: execute PAPD + * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power + * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk + */ +enum iwl_tx_flags { + TX_CMD_FLG_PROT_REQUIRE = BIT(0), + TX_CMD_FLG_ACK = BIT(3), + TX_CMD_FLG_STA_RATE = BIT(4), + TX_CMD_FLG_BA = BIT(5), + TX_CMD_FLG_BAR = BIT(6), + TX_CMD_FLG_TXOP_PROT = BIT(7), + TX_CMD_FLG_VHT_NDPA = BIT(8), + TX_CMD_FLG_HT_NDPA = BIT(9), + TX_CMD_FLG_CSI_FDBK2HOST = BIT(10), + TX_CMD_FLG_BT_DIS = BIT(12), + TX_CMD_FLG_SEQ_CTL = BIT(13), + TX_CMD_FLG_MORE_FRAG = BIT(14), + TX_CMD_FLG_NEXT_FRAME = BIT(15), + TX_CMD_FLG_TSF = BIT(16), + TX_CMD_FLG_CALIB = BIT(17), + TX_CMD_FLG_KEEP_SEQ_CTL = BIT(18), + TX_CMD_FLG_AGG_START = BIT(19), + TX_CMD_FLG_MH_PAD = BIT(20), + TX_CMD_FLG_RESP_TO_DRV = BIT(21), + TX_CMD_FLG_CCMP_AGG = BIT(22), + TX_CMD_FLG_TKIP_MIC_DONE = BIT(23), + TX_CMD_FLG_CTS_ONLY = BIT(24), + TX_CMD_FLG_DUR = BIT(25), + TX_CMD_FLG_FW_DROP = BIT(26), + TX_CMD_FLG_EXEC_PAPD = BIT(27), + TX_CMD_FLG_PAPD_TYPE = BIT(28), + TX_CMD_FLG_HCCA_CHUNK = BIT(31) +}; /* TX_FLAGS_BITS_API_S_VER_1 */ + +/* + * TX command security control + */ +#define TX_CMD_SEC_WEP 0x01 +#define TX_CMD_SEC_CCM 0x02 +#define TX_CMD_SEC_TKIP 0x03 +#define TX_CMD_SEC_WEP_KEY_IDX_POS 6 +#define TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0 +#define TX_CMD_SEC_KEY128 0x08 + +/* TODO: how does these values are OK with only 16 bit variable??? */ +/* + * TX command next frame info + * + * bits 0:2 - security control (TX_CMD_SEC_*) + * bit 3 - immediate ACK required + * bit 4 - rate is taken from STA table + * bit 5 - frame belongs to BA stream + * bit 6 - immediate BA response expected + * bit 7 - unused + * bits 8:15 - Station ID + * bits 16:31 - rate + */ +#define TX_CMD_NEXT_FRAME_ACK_MSK (0x8) +#define TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10) +#define TX_CMD_NEXT_FRAME_BA_MSK (0x20) +#define TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40) +#define TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8) +#define TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00) +#define TX_CMD_NEXT_FRAME_STA_ID_POS (8) +#define TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000) +#define TX_CMD_NEXT_FRAME_RATE_POS (16) + +/* + * TX command Frame life time in us - to be written in pm_frame_timeout + */ +#define TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF +#define TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/ +#define TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */ +#define TX_CMD_LIFE_TIME_EXPIRED_FRAME 0 + +/* + * TID for non QoS frames - to be written in tid_tspec + */ +#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT + +/* + * Limits on the retransmissions - to be written in {data,rts}_retry_limit + */ +#define IWL_DEFAULT_TX_RETRY 15 +#define IWL_MGMT_DFAULT_RETRY_LIMIT 3 +#define IWL_RTS_DFAULT_RETRY_LIMIT 60 +#define IWL_BAR_DFAULT_RETRY_LIMIT 60 +#define IWL_LOW_RETRY_LIMIT 7 + +/* TODO: complete documentation for try_cnt and btkill_cnt */ +/** + * struct iwl_tx_cmd - TX command struct to FW + * ( TX_CMD = 0x1c ) + * @len: in bytes of the payload, see below for details + * @next_frame_len: same as len, but for next frame (0 if not applicable) + * Used for fragmentation and bursting, but not in 11n aggregation. + * @tx_flags: combination of TX_CMD_FLG_* + * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is + * cleared. Combination of RATE_MCS_* + * @sta_id: index of destination station in FW station table + * @sec_ctl: security control, TX_CMD_SEC_* + * @initial_rate_index: index into the the rate table for initial TX attempt. + * Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. + * @key: security key + * @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_* + * @life_time: frame life time (usecs??) + * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt + + * btkill_cnd + reserved), first 32 bits. "0" disables usage. + * @dram_msb_ptr: upper bits of the scratch physical address + * @rts_retry_limit: max attempts for RTS + * @data_retry_limit: max attempts to send the data packet + * @tid_spec: TID/tspec + * @pm_frame_timeout: PM TX frame timeout + * @driver_txop: duration od EDCA TXOP, in 32-usec units. Set this if not + * specified by HCCA protocol + * + * The byte count (both len and next_frame_len) includes MAC header + * (24/26/30/32 bytes) + * + 2 bytes pad if 26/30 header size + * + 8 byte IV for CCM or TKIP (not used for WEP) + * + Data payload + * + 8-byte MIC (not used for CCM/WEP) + * It does not include post-MAC padding, i.e., + * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes. + * Range of len: 14-2342 bytes. + * + * After the struct fields the MAC header is placed, plus any padding, + * and then the actial payload. + */ +struct iwl_tx_cmd { + __le16 len; + __le16 next_frame_len; + __le32 tx_flags; + /* DRAM_SCRATCH_API_U_VER_1 */ + u8 try_cnt; + u8 btkill_cnt; + __le16 reserved; + __le32 rate_n_flags; + u8 sta_id; + u8 sec_ctl; + u8 initial_rate_index; + u8 reserved2; + u8 key[16]; + __le16 next_frame_flags; + __le16 reserved3; + __le32 life_time; + __le32 dram_lsb_ptr; + u8 dram_msb_ptr; + u8 rts_retry_limit; + u8 data_retry_limit; + u8 tid_tspec; + __le16 pm_frame_timeout; + __le16 driver_txop; + u8 payload[0]; + struct ieee80211_hdr hdr[0]; +} __packed; /* TX_CMD_API_S_VER_3 */ + +/* + * TX response related data + */ + +/* + * enum iwl_tx_status - status that is returned by the fw after attempts to Tx + * @TX_STATUS_SUCCESS: + * @TX_STATUS_DIRECT_DONE: + * @TX_STATUS_POSTPONE_DELAY: + * @TX_STATUS_POSTPONE_FEW_BYTES: + * @TX_STATUS_POSTPONE_BT_PRIO: + * @TX_STATUS_POSTPONE_QUIET_PERIOD: + * @TX_STATUS_POSTPONE_CALC_TTAK: + * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: + * @TX_STATUS_FAIL_SHORT_LIMIT: + * @TX_STATUS_FAIL_LONG_LIMIT: + * @TX_STATUS_FAIL_UNDERRUN: + * @TX_STATUS_FAIL_DRAIN_FLOW: + * @TX_STATUS_FAIL_RFKILL_FLUSH: + * @TX_STATUS_FAIL_LIFE_EXPIRE: + * @TX_STATUS_FAIL_DEST_PS: + * @TX_STATUS_FAIL_HOST_ABORTED: + * @TX_STATUS_FAIL_BT_RETRY: + * @TX_STATUS_FAIL_STA_INVALID: + * @TX_TATUS_FAIL_FRAG_DROPPED: + * @TX_STATUS_FAIL_TID_DISABLE: + * @TX_STATUS_FAIL_FIFO_FLUSHED: + * @TX_STATUS_FAIL_SMALL_CF_POLL: + * @TX_STATUS_FAIL_FW_DROP: + * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and + * STA table + * @TX_FRAME_STATUS_INTERNAL_ABORT: + * @TX_MODE_MSK: + * @TX_MODE_NO_BURST: + * @TX_MODE_IN_BURST_SEQ: + * @TX_MODE_FIRST_IN_BURST: + * @TX_QUEUE_NUM_MSK: + * + * Valid only if frame_count =1 + * TODO: complete documentation + */ +enum iwl_tx_status { + TX_STATUS_MSK = 0x000000ff, + TX_STATUS_SUCCESS = 0x01, + TX_STATUS_DIRECT_DONE = 0x02, + /* postpone TX */ + TX_STATUS_POSTPONE_DELAY = 0x40, + TX_STATUS_POSTPONE_FEW_BYTES = 0x41, + TX_STATUS_POSTPONE_BT_PRIO = 0x42, + TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, + TX_STATUS_POSTPONE_CALC_TTAK = 0x44, + /* abort TX */ + TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, + TX_STATUS_FAIL_SHORT_LIMIT = 0x82, + TX_STATUS_FAIL_LONG_LIMIT = 0x83, + TX_STATUS_FAIL_UNDERRUN = 0x84, + TX_STATUS_FAIL_DRAIN_FLOW = 0x85, + TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, + TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, + TX_STATUS_FAIL_DEST_PS = 0x88, + TX_STATUS_FAIL_HOST_ABORTED = 0x89, + TX_STATUS_FAIL_BT_RETRY = 0x8a, + TX_STATUS_FAIL_STA_INVALID = 0x8b, + TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, + TX_STATUS_FAIL_TID_DISABLE = 0x8d, + TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, + TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f, + TX_STATUS_FAIL_FW_DROP = 0x90, + TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91, + TX_STATUS_INTERNAL_ABORT = 0x92, + TX_MODE_MSK = 0x00000f00, + TX_MODE_NO_BURST = 0x00000000, + TX_MODE_IN_BURST_SEQ = 0x00000100, + TX_MODE_FIRST_IN_BURST = 0x00000200, + TX_QUEUE_NUM_MSK = 0x0001f000, + TX_NARROW_BW_MSK = 0x00060000, + TX_NARROW_BW_1DIV2 = 0x00020000, + TX_NARROW_BW_1DIV4 = 0x00040000, + TX_NARROW_BW_1DIV8 = 0x00060000, +}; + +/* + * enum iwl_tx_agg_status - TX aggregation status + * @AGG_TX_STATE_STATUS_MSK: + * @AGG_TX_STATE_TRANSMITTED: + * @AGG_TX_STATE_UNDERRUN: + * @AGG_TX_STATE_BT_PRIO: + * @AGG_TX_STATE_FEW_BYTES: + * @AGG_TX_STATE_ABORT: + * @AGG_TX_STATE_LAST_SENT_TTL: + * @AGG_TX_STATE_LAST_SENT_TRY_CNT: + * @AGG_TX_STATE_LAST_SENT_BT_KILL: + * @AGG_TX_STATE_SCD_QUERY: + * @AGG_TX_STATE_TEST_BAD_CRC32: + * @AGG_TX_STATE_RESPONSE: + * @AGG_TX_STATE_DUMP_TX: + * @AGG_TX_STATE_DELAY_TX: + * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries + * occur if tx failed for this frame when it was a member of a previous + * aggregation block). If rate scaling is used, retry count indicates the + * rate table entry used for all frames in the new agg. + *@ AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for + * this frame + * + * TODO: complete documentation + */ +enum iwl_tx_agg_status { + AGG_TX_STATE_STATUS_MSK = 0x00fff, + AGG_TX_STATE_TRANSMITTED = 0x000, + AGG_TX_STATE_UNDERRUN = 0x001, + AGG_TX_STATE_BT_PRIO = 0x002, + AGG_TX_STATE_FEW_BYTES = 0x004, + AGG_TX_STATE_ABORT = 0x008, + AGG_TX_STATE_LAST_SENT_TTL = 0x010, + AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020, + AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040, + AGG_TX_STATE_SCD_QUERY = 0x080, + AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100, + AGG_TX_STATE_RESPONSE = 0x1ff, + AGG_TX_STATE_DUMP_TX = 0x200, + AGG_TX_STATE_DELAY_TX = 0x400, + AGG_TX_STATE_TRY_CNT_POS = 12, + AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS, +}; + +#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL| \ + AGG_TX_STATE_LAST_SENT_TRY_CNT| \ + AGG_TX_STATE_LAST_SENT_BT_KILL) + +/* + * The mask below describes a status where we are absolutely sure that the MPDU + * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've + * written the bytes to the TXE, but we know nothing about what the DSP did. + */ +#define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \ + AGG_TX_STATE_ABORT | \ + AGG_TX_STATE_SCD_QUERY) + +/* + * REPLY_TX = 0x1c (response) + * + * This response may be in one of two slightly different formats, indicated + * by the frame_count field: + * + * 1) No aggregation (frame_count == 1). This reports Tx results for a single + * frame. Multiple attempts, at various bit rates, may have been made for + * this frame. + * + * 2) Aggregation (frame_count > 1). This reports Tx results for two or more + * frames that used block-acknowledge. All frames were transmitted at + * same rate. Rate scaling may have been used if first frame in this new + * agg block failed in previous agg block(s). + * + * Note that, for aggregation, ACK (block-ack) status is not delivered + * here; block-ack has not been received by the time the device records + * this status. + * This status relates to reasons the tx might have been blocked or aborted + * within the device, rather than whether it was received successfully by + * the destination station. + */ + +/** + * struct agg_tx_status - per packet TX aggregation status + * @status: enum iwl_tx_agg_status + * @sequence: Sequence # for this frame's Tx cmd (not SSN!) + */ +struct agg_tx_status { + __le16 status; + __le16 sequence; +} __packed; + +/* + * definitions for initial rate index field + * bits [3:0] initial rate index + * bits [6:4] rate table color, used for the initial rate + * bit-7 invalid rate indication + */ +#define TX_RES_INIT_RATE_INDEX_MSK 0x0f +#define TX_RES_RATE_TABLE_COLOR_MSK 0x70 +#define TX_RES_INV_RATE_INDEX_MSK 0x80 + +#define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) +#define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) + +/** + * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet + * ( REPLY_TX = 0x1c ) + * @frame_count: 1 no aggregation, >1 aggregation + * @bt_kill_count: num of times blocked by bluetooth (unused for agg) + * @failure_rts: num of failures due to unsuccessful RTS + * @failure_frame: num failures due to no ACK (unused for agg) + * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the + * Tx of all the batch. RATE_MCS_* + * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. + * for agg: RTS + CTS + aggregation tx time + block-ack time. + * in usec. + * @pa_status: tx power info + * @pa_integ_res_a: tx power info + * @pa_integ_res_b: tx power info + * @pa_integ_res_c: tx power info + * @measurement_req_id: tx power info + * @tfd_info: TFD information set by the FH + * @seq_ctl: sequence control from the Tx cmd + * @byte_cnt: byte count from the Tx cmd + * @tlc_info: TLC rate info + * @ra_tid: bits [3:0] = ra, bits [7:4] = tid + * @frame_ctrl: frame control + * @status: for non-agg: frame status TX_STATUS_* + * for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields + * follow this one, up to frame_count. + * + * After the array of statuses comes the SSN of the SCD. Look at + * %iwl_mvm_get_scd_ssn for more details. + */ +struct iwl_mvm_tx_resp { + u8 frame_count; + u8 bt_kill_count; + u8 failure_rts; + u8 failure_frame; + __le32 initial_rate; + __le16 wireless_media_time; + + u8 pa_status; + u8 pa_integ_res_a[3]; + u8 pa_integ_res_b[3]; + u8 pa_integ_res_c[3]; + __le16 measurement_req_id; + __le16 reserved; + + __le32 tfd_info; + __le16 seq_ctl; + __le16 byte_cnt; + u8 tlc_info; + u8 ra_tid; + __le16 frame_ctrl; + + struct agg_tx_status status; +} __packed; /* TX_RSP_API_S_VER_3 */ + +/** + * struct iwl_mvm_ba_notif - notifies about reception of BA + * ( BA_NOTIF = 0xc5 ) + * @sta_addr_lo32: lower 32 bits of the MAC address + * @sta_addr_hi16: upper 16 bits of the MAC address + * @sta_id: Index of recipient (BA-sending) station in fw's station table + * @tid: tid of the session + * @seq_ctl: + * @bitmap: the bitmap of the BA notification as seen in the air + * @scd_flow: the tx queue this BA relates to + * @scd_ssn: the index of the last contiguously sent packet + * @txed: number of Txed frames in this batch + * @txed_2_done: number of Acked frames in this batch + */ +struct iwl_mvm_ba_notif { + __le32 sta_addr_lo32; + __le16 sta_addr_hi16; + __le16 reserved; + + u8 sta_id; + u8 tid; + __le16 seq_ctl; + __le64 bitmap; + __le16 scd_flow; + __le16 scd_ssn; + u8 txed; + u8 txed_2_done; + __le16 reserved1; +} __packed; + +/* + * struct iwl_mac_beacon_cmd - beacon template command + * @tx: the tx commands associated with the beacon frame + * @template_id: currently equal to the mac context id of the coresponding + * mac. + * @tim_idx: the offset of the tim IE in the beacon + * @tim_size: the length of the tim IE + * @frame: the template of the beacon frame + */ +struct iwl_mac_beacon_cmd { + struct iwl_tx_cmd tx; + __le32 template_id; + __le32 tim_idx; + __le32 tim_size; + struct ieee80211_hdr frame[0]; +} __packed; + +/** + * enum iwl_dump_control - dump (flush) control flags + * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty + * and the TFD queues are empty. + */ +enum iwl_dump_control { + DUMP_TX_FIFO_FLUSH = BIT(1), +}; + +/** + * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command + * @queues_ctl: bitmap of queues to flush + * @flush_ctl: control flags + * @reserved: reserved + */ +struct iwl_tx_path_flush_cmd { + __le32 queues_ctl; + __le16 flush_ctl; + __le16 reserved; +} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */ + +/** + * iwl_mvm_get_scd_ssn - returns the SSN of the SCD + * @tx_resp: the Tx response from the fw (agg or non-agg) + * + * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since + * it can't know that everything will go well until the end of the AMPDU, it + * can't know in advance the number of MPDUs that will be sent in the current + * batch. This is why it writes the agg Tx response while it fetches the MPDUs. + * Hence, it can't know in advance what the SSN of the SCD will be at the end + * of the batch. This is why the SSN of the SCD is written at the end of the + * whole struct at a variable offset. This function knows how to cope with the + * variable offset and returns the SSN of the SCD. + */ +static inline u32 iwl_mvm_get_scd_ssn(struct iwl_mvm_tx_resp *tx_resp) +{ + return le32_to_cpup((__le32 *)&tx_resp->status + + tx_resp->frame_count) & 0xfff; +} + +#endif /* __fw_api_tx_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h new file mode 100644 index 0000000..9fd49db --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -0,0 +1,949 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __fw_api_h__ +#define __fw_api_h__ + +#include "fw-api-rs.h" +#include "fw-api-tx.h" +#include "fw-api-sta.h" +#include "fw-api-mac.h" +#include "fw-api-power.h" +#include "fw-api-d3.h" + +/* queue and FIFO numbers by usage */ +enum { + IWL_MVM_OFFCHANNEL_QUEUE = 8, + IWL_MVM_CMD_QUEUE = 9, + IWL_MVM_AUX_QUEUE = 15, + IWL_MVM_FIRST_AGG_QUEUE = 16, + IWL_MVM_NUM_QUEUES = 20, + IWL_MVM_LAST_AGG_QUEUE = IWL_MVM_NUM_QUEUES - 1, + IWL_MVM_CMD_FIFO = 7 +}; + +#define IWL_MVM_STATION_COUNT 16 + +/* commands */ +enum { + MVM_ALIVE = 0x1, + REPLY_ERROR = 0x2, + + INIT_COMPLETE_NOTIF = 0x4, + + /* PHY context commands */ + PHY_CONTEXT_CMD = 0x8, + DBG_CFG = 0x9, + + /* station table */ + ADD_STA = 0x18, + REMOVE_STA = 0x19, + + /* TX */ + TX_CMD = 0x1c, + TXPATH_FLUSH = 0x1e, + MGMT_MCAST_KEY = 0x1f, + + /* global key */ + WEP_KEY = 0x20, + + /* MAC and Binding commands */ + MAC_CONTEXT_CMD = 0x28, + TIME_EVENT_CMD = 0x29, /* both CMD and response */ + TIME_EVENT_NOTIFICATION = 0x2a, + BINDING_CONTEXT_CMD = 0x2b, + TIME_QUOTA_CMD = 0x2c, + + LQ_CMD = 0x4e, + + /* Calibration */ + TEMPERATURE_NOTIFICATION = 0x62, + CALIBRATION_CFG_CMD = 0x65, + CALIBRATION_RES_NOTIFICATION = 0x66, + CALIBRATION_COMPLETE_NOTIFICATION = 0x67, + RADIO_VERSION_NOTIFICATION = 0x68, + + /* Scan offload */ + SCAN_OFFLOAD_REQUEST_CMD = 0x51, + SCAN_OFFLOAD_ABORT_CMD = 0x52, + SCAN_OFFLOAD_COMPLETE = 0x6D, + SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, + SCAN_OFFLOAD_CONFIG_CMD = 0x6f, + + /* Phy */ + PHY_CONFIGURATION_CMD = 0x6a, + CALIB_RES_NOTIF_PHY_DB = 0x6b, + /* PHY_DB_CMD = 0x6c, */ + + /* Power */ + POWER_TABLE_CMD = 0x77, + + /* Scanning */ + SCAN_REQUEST_CMD = 0x80, + SCAN_ABORT_CMD = 0x81, + SCAN_START_NOTIFICATION = 0x82, + SCAN_RESULTS_NOTIFICATION = 0x83, + SCAN_COMPLETE_NOTIFICATION = 0x84, + + /* NVM */ + NVM_ACCESS_CMD = 0x88, + + SET_CALIB_DEFAULT_CMD = 0x8e, + + BEACON_TEMPLATE_CMD = 0x91, + TX_ANT_CONFIGURATION_CMD = 0x98, + STATISTICS_NOTIFICATION = 0x9d, + + /* RF-KILL commands and notifications */ + CARD_STATE_CMD = 0xa0, + CARD_STATE_NOTIFICATION = 0xa1, + + REPLY_RX_PHY_CMD = 0xc0, + REPLY_RX_MPDU_CMD = 0xc1, + BA_NOTIF = 0xc5, + + REPLY_DEBUG_CMD = 0xf0, + DEBUG_LOG_MSG = 0xf7, + + /* D3 commands/notifications */ + D3_CONFIG_CMD = 0xd3, + PROT_OFFLOAD_CONFIG_CMD = 0xd4, + OFFLOADS_QUERY_CMD = 0xd5, + REMOTE_WAKE_CONFIG_CMD = 0xd6, + + /* for WoWLAN in particular */ + WOWLAN_PATTERNS = 0xe0, + WOWLAN_CONFIGURATION = 0xe1, + WOWLAN_TSC_RSC_PARAM = 0xe2, + WOWLAN_TKIP_PARAM = 0xe3, + WOWLAN_KEK_KCK_MATERIAL = 0xe4, + WOWLAN_GET_STATUSES = 0xe5, + WOWLAN_TX_POWER_PER_DB = 0xe6, + + /* and for NetDetect */ + NET_DETECT_CONFIG_CMD = 0x54, + NET_DETECT_PROFILES_QUERY_CMD = 0x56, + NET_DETECT_PROFILES_CMD = 0x57, + NET_DETECT_HOTSPOTS_CMD = 0x58, + NET_DETECT_HOTSPOTS_QUERY_CMD = 0x59, + + REPLY_MAX = 0xff, +}; + +/** + * struct iwl_cmd_response - generic response struct for most commands + * @status: status of the command asked, changes for each one + */ +struct iwl_cmd_response { + __le32 status; +}; + +/* + * struct iwl_tx_ant_cfg_cmd + * @valid: valid antenna configuration + */ +struct iwl_tx_ant_cfg_cmd { + __le32 valid; +} __packed; + +/* + * Calibration control struct. + * Sent as part of the phy configuration command. + * @flow_trigger: bitmap for which calibrations to perform according to + * flow triggers. + * @event_trigger: bitmap for which calibrations to perform according to + * event triggers. + */ +struct iwl_calib_ctrl { + __le32 flow_trigger; + __le32 event_trigger; +} __packed; + +/* This enum defines the bitmap of various calibrations to enable in both + * init ucode and runtime ucode through CALIBRATION_CFG_CMD. + */ +enum iwl_calib_cfg { + IWL_CALIB_CFG_XTAL_IDX = BIT(0), + IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), + IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), + IWL_CALIB_CFG_PAPD_IDX = BIT(3), + IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), + IWL_CALIB_CFG_DC_IDX = BIT(5), + IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), + IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), + IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), + IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), + IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), + IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), + IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), + IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), + IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), + IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), + IWL_CALIB_CFG_DAC_IDX = BIT(16), + IWL_CALIB_CFG_ABS_IDX = BIT(17), + IWL_CALIB_CFG_AGC_IDX = BIT(18), +}; + +/* + * Phy configuration command. + */ +struct iwl_phy_cfg_cmd { + __le32 phy_cfg; + struct iwl_calib_ctrl calib_control; +} __packed; + +#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1)) +#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3)) +#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5)) +#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7)) +#define PHY_CFG_TX_CHAIN_A BIT(8) +#define PHY_CFG_TX_CHAIN_B BIT(9) +#define PHY_CFG_TX_CHAIN_C BIT(10) +#define PHY_CFG_RX_CHAIN_A BIT(12) +#define PHY_CFG_RX_CHAIN_B BIT(13) +#define PHY_CFG_RX_CHAIN_C BIT(14) + + +/* Target of the NVM_ACCESS_CMD */ +enum { + NVM_ACCESS_TARGET_CACHE = 0, + NVM_ACCESS_TARGET_OTP = 1, + NVM_ACCESS_TARGET_EEPROM = 2, +}; + +/** + * struct iwl_nvm_access_cmd_ver1 - Request the device to send the NVM. + * @op_code: 0 - read, 1 - write. + * @target: NVM_ACCESS_TARGET_*. should be 0 for read. + * @cache_refresh: 0 - None, 1- NVM. + * @offset: offset in the nvm data. + * @length: of the chunk. + * @data: empty on read, the NVM chunk on write + */ +struct iwl_nvm_access_cmd_ver1 { + u8 op_code; + u8 target; + u8 cache_refresh; + u8 reserved; + __le16 offset; + __le16 length; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_API_S_VER_1 */ + +/** + * struct iwl_nvm_access_resp_ver1 - response to NVM_ACCESS_CMD + * @offset: the offset in the nvm data + * @length: of the chunk + * @data: the nvm chunk on when NVM_ACCESS_CMD was read, nothing on write + */ +struct iwl_nvm_access_resp_ver1 { + __le16 offset; + __le16 length; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_1 */ + +/* Section types for NVM_ACCESS_CMD version 2 */ +enum { + NVM_SECTION_TYPE_HW = 0, + NVM_SECTION_TYPE_SW, + NVM_SECTION_TYPE_PAPD, + NVM_SECTION_TYPE_BT, + NVM_SECTION_TYPE_CALIBRATION, + NVM_SECTION_TYPE_PRODUCTION, + NVM_SECTION_TYPE_POST_FCS_CALIB, + NVM_NUM_OF_SECTIONS, +}; + +/** + * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section + * @op_code: 0 - read, 1 - write + * @target: NVM_ACCESS_TARGET_* + * @type: NVM_SECTION_TYPE_* + * @offset: offset in bytes into the section + * @length: in bytes, to read/write + * @data: if write operation, the data to write. On read its empty + */ +struct iwl_nvm_access_cmd_ver2 { + u8 op_code; + u8 target; + __le16 type; + __le16 offset; + __le16 length; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ + +/** + * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD + * @offset: offset in bytes into the section + * @length: in bytes, either how much was written or read + * @type: NVM_SECTION_TYPE_* + * @status: 0 for success, fail otherwise + * @data: if read operation, the data returned. Empty on write. + */ +struct iwl_nvm_access_resp_ver2 { + __le16 offset; + __le16 length; + __le16 type; + __le16 status; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ + +/* MVM_ALIVE 0x1 */ + +/* alive response is_valid values */ +#define ALIVE_RESP_UCODE_OK BIT(0) +#define ALIVE_RESP_RFKILL BIT(1) + +/* alive response ver_type values */ +enum { + FW_TYPE_HW = 0, + FW_TYPE_PROT = 1, + FW_TYPE_AP = 2, + FW_TYPE_WOWLAN = 3, + FW_TYPE_TIMING = 4, + FW_TYPE_WIPAN = 5 +}; + +/* alive response ver_subtype values */ +enum { + FW_SUBTYPE_FULL_FEATURE = 0, + FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */ + FW_SUBTYPE_REDUCED = 2, + FW_SUBTYPE_ALIVE_ONLY = 3, + FW_SUBTYPE_WOWLAN = 4, + FW_SUBTYPE_AP_SUBTYPE = 5, + FW_SUBTYPE_WIPAN = 6, + FW_SUBTYPE_INITIALIZE = 9 +}; + +#define IWL_ALIVE_STATUS_ERR 0xDEAD +#define IWL_ALIVE_STATUS_OK 0xCAFE + +#define IWL_ALIVE_FLG_RFKILL BIT(0) + +struct mvm_alive_resp { + __le16 status; + __le16 flags; + u8 ucode_minor; + u8 ucode_major; + __le16 id; + u8 api_minor; + u8 api_major; + u8 ver_subtype; + u8 ver_type; + u8 mac; + u8 opt; + __le16 reserved2; + __le32 timestamp; + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 cpu_register_ptr; + __le32 dbgm_config_ptr; + __le32 alive_counter_ptr; + __le32 scd_base_ptr; /* SRAM address for SCD */ +} __packed; /* ALIVE_RES_API_S_VER_1 */ + +/* Error response/notification */ +enum { + FW_ERR_UNKNOWN_CMD = 0x0, + FW_ERR_INVALID_CMD_PARAM = 0x1, + FW_ERR_SERVICE = 0x2, + FW_ERR_ARC_MEMORY = 0x3, + FW_ERR_ARC_CODE = 0x4, + FW_ERR_WATCH_DOG = 0x5, + FW_ERR_WEP_GRP_KEY_INDX = 0x10, + FW_ERR_WEP_KEY_SIZE = 0x11, + FW_ERR_OBSOLETE_FUNC = 0x12, + FW_ERR_UNEXPECTED = 0xFE, + FW_ERR_FATAL = 0xFF +}; + +/** + * struct iwl_error_resp - FW error indication + * ( REPLY_ERROR = 0x2 ) + * @error_type: one of FW_ERR_* + * @cmd_id: the command ID for which the error occured + * @bad_cmd_seq_num: sequence number of the erroneous command + * @error_service: which service created the error, applicable only if + * error_type = 2, otherwise 0 + * @timestamp: TSF in usecs. + */ +struct iwl_error_resp { + __le32 error_type; + u8 cmd_id; + u8 reserved1; + __le16 bad_cmd_seq_num; + __le32 error_service; + __le64 timestamp; +} __packed; + + +/* Common PHY, MAC and Bindings definitions */ + +#define MAX_MACS_IN_BINDING (3) +#define MAX_BINDINGS (4) +#define AUX_BINDING_INDEX (3) +#define MAX_PHYS (4) + +/* Used to extract ID and color from the context dword */ +#define FW_CTXT_ID_POS (0) +#define FW_CTXT_ID_MSK (0xff << FW_CTXT_ID_POS) +#define FW_CTXT_COLOR_POS (8) +#define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS) +#define FW_CTXT_INVALID (0xffffffff) + +#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\ + (_color << FW_CTXT_COLOR_POS)) + +/* Possible actions on PHYs, MACs and Bindings */ +enum { + FW_CTXT_ACTION_STUB = 0, + FW_CTXT_ACTION_ADD, + FW_CTXT_ACTION_MODIFY, + FW_CTXT_ACTION_REMOVE, + FW_CTXT_ACTION_NUM +}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ + +/* Time Events */ + +/* Time Event types, according to MAC type */ +enum iwl_time_event_type { + /* BSS Station Events */ + TE_BSS_STA_AGGRESSIVE_ASSOC, + TE_BSS_STA_ASSOC, + TE_BSS_EAP_DHCP_PROT, + TE_BSS_QUIET_PERIOD, + + /* P2P Device Events */ + TE_P2P_DEVICE_DISCOVERABLE, + TE_P2P_DEVICE_LISTEN, + TE_P2P_DEVICE_ACTION_SCAN, + TE_P2P_DEVICE_FULL_SCAN, + + /* P2P Client Events */ + TE_P2P_CLIENT_AGGRESSIVE_ASSOC, + TE_P2P_CLIENT_ASSOC, + TE_P2P_CLIENT_QUIET_PERIOD, + + /* P2P GO Events */ + TE_P2P_GO_ASSOC_PROT, + TE_P2P_GO_REPETITIVE_NOA, + TE_P2P_GO_CT_WINDOW, + + /* WiDi Sync Events */ + TE_WIDI_TX_SYNC, + + TE_MAX +}; /* MAC_EVENT_TYPE_API_E_VER_1 */ + +/* Time Event dependencies: none, on another TE, or in a specific time */ +enum { + TE_INDEPENDENT = 0, + TE_DEP_OTHER = 1, + TE_DEP_TSF = 2, + TE_EVENT_SOCIOPATHIC = 4, +}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ + +/* When to send Time Event notifications and to whom (internal = FW) */ +enum { + TE_NOTIF_NONE = 0, + TE_NOTIF_HOST_START = 0x1, + TE_NOTIF_HOST_END = 0x2, + TE_NOTIF_INTERNAL_START = 0x4, + TE_NOTIF_INTERNAL_END = 0x8 +}; /* MAC_EVENT_ACTION_API_E_VER_1 */ + +/* + * @TE_FRAG_NONE: fragmentation of the time event is NOT allowed. + * @TE_FRAG_SINGLE: fragmentation of the time event is allowed, but only + * the first fragment is scheduled. + * @TE_FRAG_DUAL: fragmentation of the time event is allowed, but only + * the first 2 fragments are scheduled. + * @TE_FRAG_ENDLESS: fragmentation of the time event is allowed, and any number + * of fragments are valid. + * + * Other than the constant defined above, specifying a fragmentation value 'x' + * means that the event can be fragmented but only the first 'x' will be + * scheduled. + */ +enum { + TE_FRAG_NONE = 0, + TE_FRAG_SINGLE = 1, + TE_FRAG_DUAL = 2, + TE_FRAG_ENDLESS = 0xffffffff +}; + +/* Repeat the time event endlessly (until removed) */ +#define TE_REPEAT_ENDLESS (0xffffffff) +/* If a Time Event has bounded repetitions, this is the maximal value */ +#define TE_REPEAT_MAX_MSK (0x0fffffff) +/* If a Time Event can be fragmented, this is the max number of fragments */ +#define TE_FRAG_MAX_MSK (0x0fffffff) + +/** + * struct iwl_time_event_cmd - configuring Time Events + * ( TIME_EVENT_CMD = 0x29 ) + * @id_and_color: ID and color of the relevant MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @id: this field has two meanings, depending on the action: + * If the action is ADD, then it means the type of event to add. + * For all other actions it is the unique event ID assigned when the + * event was added by the FW. + * @apply_time: When to start the Time Event (in GP2) + * @max_delay: maximum delay to event's start (apply time), in TU + * @depends_on: the unique ID of the event we depend on (if any) + * @interval: interval between repetitions, in TU + * @interval_reciprocal: 2^32 / interval + * @duration: duration of event in TU + * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS + * @dep_policy: one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF + * @is_present: 0 or 1, are we present or absent during the Time Event + * @max_frags: maximal number of fragments the Time Event can be divided to + * @notify: notifications using TE_NOTIF_* (whom to notify when) + */ +struct iwl_time_event_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + __le32 id; + /* MAC_TIME_EVENT_DATA_API_S_VER_1 */ + __le32 apply_time; + __le32 max_delay; + __le32 dep_policy; + __le32 depends_on; + __le32 is_present; + __le32 max_frags; + __le32 interval; + __le32 interval_reciprocal; + __le32 duration; + __le32 repeat; + __le32 notify; +} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_1 */ + +/** + * struct iwl_time_event_resp - response structure to iwl_time_event_cmd + * @status: bit 0 indicates success, all others specify errors + * @id: the Time Event type + * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE + * @id_and_color: ID and color of the relevant MAC + */ +struct iwl_time_event_resp { + __le32 status; + __le32 id; + __le32 unique_id; + __le32 id_and_color; +} __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */ + +/** + * struct iwl_time_event_notif - notifications of time event start/stop + * ( TIME_EVENT_NOTIFICATION = 0x2a ) + * @timestamp: action timestamp in GP2 + * @session_id: session's unique id + * @unique_id: unique id of the Time Event itself + * @id_and_color: ID and color of the relevant MAC + * @action: one of TE_NOTIF_START or TE_NOTIF_END + * @status: true if scheduled, false otherwise (not executed) + */ +struct iwl_time_event_notif { + __le32 timestamp; + __le32 session_id; + __le32 unique_id; + __le32 id_and_color; + __le32 action; + __le32 status; +} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */ + + +/* Bindings and Time Quota */ + +/** + * struct iwl_binding_cmd - configuring bindings + * ( BINDING_CONTEXT_CMD = 0x2b ) + * @id_and_color: ID and color of the relevant Binding + * @action: action to perform, one of FW_CTXT_ACTION_* + * @macs: array of MAC id and colors which belong to the binding + * @phy: PHY id and color which belongs to the binding + */ +struct iwl_binding_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + /* BINDING_DATA_API_S_VER_1 */ + __le32 macs[MAX_MACS_IN_BINDING]; + __le32 phy; +} __packed; /* BINDING_CMD_API_S_VER_1 */ + +/** + * struct iwl_time_quota_data - configuration of time quota per binding + * @id_and_color: ID and color of the relevant Binding + * @quota: absolute time quota in TU. The scheduler will try to divide the + * remainig quota (after Time Events) according to this quota. + * @max_duration: max uninterrupted context duration in TU + */ +struct iwl_time_quota_data { + __le32 id_and_color; + __le32 quota; + __le32 max_duration; +} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */ + +/** + * struct iwl_time_quota_cmd - configuration of time quota between bindings + * ( TIME_QUOTA_CMD = 0x2c ) + * @quotas: allocations per binding + */ +struct iwl_time_quota_cmd { + struct iwl_time_quota_data quotas[MAX_BINDINGS]; +} __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ + + +/* PHY context */ + +/* Supported bands */ +#define PHY_BAND_5 (0) +#define PHY_BAND_24 (1) + +/* Supported channel width, vary if there is VHT support */ +#define PHY_VHT_CHANNEL_MODE20 (0x0) +#define PHY_VHT_CHANNEL_MODE40 (0x1) +#define PHY_VHT_CHANNEL_MODE80 (0x2) +#define PHY_VHT_CHANNEL_MODE160 (0x3) + +/* + * Control channel position: + * For legacy set bit means upper channel, otherwise lower. + * For VHT - bit-2 marks if the control is lower/upper relative to center-freq + * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. + * center_freq + * | + * 40Mhz |_______|_______| + * 80Mhz |_______|_______|_______|_______| + * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| + * code 011 010 001 000 | 100 101 110 111 + */ +#define PHY_VHT_CTRL_POS_1_BELOW (0x0) +#define PHY_VHT_CTRL_POS_2_BELOW (0x1) +#define PHY_VHT_CTRL_POS_3_BELOW (0x2) +#define PHY_VHT_CTRL_POS_4_BELOW (0x3) +#define PHY_VHT_CTRL_POS_1_ABOVE (0x4) +#define PHY_VHT_CTRL_POS_2_ABOVE (0x5) +#define PHY_VHT_CTRL_POS_3_ABOVE (0x6) +#define PHY_VHT_CTRL_POS_4_ABOVE (0x7) + +/* + * @band: PHY_BAND_* + * @channel: channel number + * @width: PHY_[VHT|LEGACY]_CHANNEL_* + * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* + */ +struct iwl_fw_channel_info { + u8 band; + u8 channel; + u8 width; + u8 ctrl_pos; +} __packed; + +#define PHY_RX_CHAIN_DRIVER_FORCE_POS (0) +#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \ + (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS) +#define PHY_RX_CHAIN_VALID_POS (1) +#define PHY_RX_CHAIN_VALID_MSK \ + (0x7 << PHY_RX_CHAIN_VALID_POS) +#define PHY_RX_CHAIN_FORCE_SEL_POS (4) +#define PHY_RX_CHAIN_FORCE_SEL_MSK \ + (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS) +#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) +#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ + (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) +#define PHY_RX_CHAIN_CNT_POS (10) +#define PHY_RX_CHAIN_CNT_MSK \ + (0x3 << PHY_RX_CHAIN_CNT_POS) +#define PHY_RX_CHAIN_MIMO_CNT_POS (12) +#define PHY_RX_CHAIN_MIMO_CNT_MSK \ + (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS) +#define PHY_RX_CHAIN_MIMO_FORCE_POS (14) +#define PHY_RX_CHAIN_MIMO_FORCE_MSK \ + (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS) + +/* TODO: fix the value, make it depend on firmware at runtime? */ +#define NUM_PHY_CTX 3 + +/* TODO: complete missing documentation */ +/** + * struct iwl_phy_context_cmd - config of the PHY context + * ( PHY_CONTEXT_CMD = 0x8 ) + * @id_and_color: ID and color of the relevant Binding + * @action: action to perform, one of FW_CTXT_ACTION_* + * @apply_time: 0 means immediate apply and context switch. + * other value means apply new params after X usecs + * @tx_param_color: ??? + * @channel_info: + * @txchain_info: ??? + * @rxchain_info: ??? + * @acquisition_data: ??? + * @dsp_cfg_flags: set to 0 + */ +struct iwl_phy_context_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + /* PHY_CONTEXT_DATA_API_S_VER_1 */ + __le32 apply_time; + __le32 tx_param_color; + struct iwl_fw_channel_info ci; + __le32 txchain_info; + __le32 rxchain_info; + __le32 acquisition_data; + __le32 dsp_cfg_flags; +} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ + +#define IWL_RX_INFO_PHY_CNT 8 +#define IWL_RX_INFO_AGC_IDX 1 +#define IWL_RX_INFO_RSSI_AB_IDX 2 +#define IWL_RX_INFO_RSSI_C_IDX 3 +#define IWL_OFDM_AGC_DB_MSK 0xfe00 +#define IWL_OFDM_AGC_DB_POS 9 +#define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff +#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00 +#define IWL_OFDM_RSSI_A_POS 0 +#define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000 +#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 +#define IWL_OFDM_RSSI_B_POS 16 +#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff +#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00 +#define IWL_OFDM_RSSI_C_POS 0 + +/** + * struct iwl_rx_phy_info - phy info + * (REPLY_RX_PHY_CMD = 0xc0) + * @non_cfg_phy_cnt: non configurable DSP phy data byte count + * @cfg_phy_cnt: configurable DSP phy data byte count + * @stat_id: configurable DSP phy data set ID + * @reserved1: + * @system_timestamp: GP2 at on air rise + * @timestamp: TSF at on air rise + * @beacon_time_stamp: beacon at on-air rise + * @phy_flags: general phy flags: band, modulation, ... + * @channel: channel number + * @non_cfg_phy_buf: for various implementations of non_cfg_phy + * @rate_n_flags: RATE_MCS_* + * @byte_count: frame's byte-count + * @frame_time: frame's time on the air, based on byte count and frame rate + * calculation + * + * Before each Rx, the device sends this data. It contains PHY information + * about the reception of the packet. + */ +struct iwl_rx_phy_info { + u8 non_cfg_phy_cnt; + u8 cfg_phy_cnt; + u8 stat_id; + u8 reserved1; + __le32 system_timestamp; + __le64 timestamp; + __le32 beacon_time_stamp; + __le16 phy_flags; + __le16 channel; + __le32 non_cfg_phy[IWL_RX_INFO_PHY_CNT]; + __le32 rate_n_flags; + __le32 byte_count; + __le16 reserved2; + __le16 frame_time; +} __packed; + +struct iwl_rx_mpdu_res_start { + __le16 byte_count; + __le16 reserved; +} __packed; + +/** + * enum iwl_rx_phy_flags - to parse %iwl_rx_phy_info phy_flags + * @RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band + * @RX_RES_PHY_FLAGS_MOD_CCK: + * @RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short + * @RX_RES_PHY_FLAGS_NARROW_BAND: + * @RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received + * @RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU + * @RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame + * @RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble + * @RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame + */ +enum iwl_rx_phy_flags { + RX_RES_PHY_FLAGS_BAND_24 = BIT(0), + RX_RES_PHY_FLAGS_MOD_CCK = BIT(1), + RX_RES_PHY_FLAGS_SHORT_PREAMBLE = BIT(2), + RX_RES_PHY_FLAGS_NARROW_BAND = BIT(3), + RX_RES_PHY_FLAGS_ANTENNA = (0x7 << 4), + RX_RES_PHY_FLAGS_ANTENNA_POS = 4, + RX_RES_PHY_FLAGS_AGG = BIT(7), + RX_RES_PHY_FLAGS_OFDM_HT = BIT(8), + RX_RES_PHY_FLAGS_OFDM_GF = BIT(9), + RX_RES_PHY_FLAGS_OFDM_VHT = BIT(10), +}; + +/** + * enum iwl_mvm_rx_status - written by fw for each Rx packet + * @RX_MPDU_RES_STATUS_CRC_OK: CRC is fine + * @RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow + * @RX_MPDU_RES_STATUS_SRC_STA_FOUND: + * @RX_MPDU_RES_STATUS_KEY_VALID: + * @RX_MPDU_RES_STATUS_KEY_PARAM_OK: + * @RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed + * @RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked + * in the driver. + * @RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine + * @RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or + * alg = CCM only. Checks replay attack for 11w frames. Relevant only if + * %RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set. + * @RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted + * @RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP + * @RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM + * @RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP + * @RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC + * @RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted + * @RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm + * @RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted + * @RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP: + * @RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP: + * @RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT: + * @RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame + * @RX_MPDU_RES_STATUS_HASH_INDEX_MSK: + * @RX_MPDU_RES_STATUS_STA_ID_MSK: + * @RX_MPDU_RES_STATUS_RRF_KILL: + * @RX_MPDU_RES_STATUS_FILTERING_MSK: + * @RX_MPDU_RES_STATUS2_FILTERING_MSK: + */ +enum iwl_mvm_rx_status { + RX_MPDU_RES_STATUS_CRC_OK = BIT(0), + RX_MPDU_RES_STATUS_OVERRUN_OK = BIT(1), + RX_MPDU_RES_STATUS_SRC_STA_FOUND = BIT(2), + RX_MPDU_RES_STATUS_KEY_VALID = BIT(3), + RX_MPDU_RES_STATUS_KEY_PARAM_OK = BIT(4), + RX_MPDU_RES_STATUS_ICV_OK = BIT(5), + RX_MPDU_RES_STATUS_MIC_OK = BIT(6), + RX_MPDU_RES_STATUS_TTAK_OK = BIT(7), + RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR = BIT(7), + RX_MPDU_RES_STATUS_SEC_NO_ENC = (0 << 8), + RX_MPDU_RES_STATUS_SEC_WEP_ENC = (1 << 8), + RX_MPDU_RES_STATUS_SEC_CCM_ENC = (2 << 8), + RX_MPDU_RES_STATUS_SEC_TKIP_ENC = (3 << 8), + RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC = (6 << 8), + RX_MPDU_RES_STATUS_SEC_ENC_ERR = (7 << 8), + RX_MPDU_RES_STATUS_SEC_ENC_MSK = (7 << 8), + RX_MPDU_RES_STATUS_DEC_DONE = BIT(11), + RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP = BIT(12), + RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP = BIT(13), + RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT = BIT(14), + RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME = BIT(15), + RX_MPDU_RES_STATUS_HASH_INDEX_MSK = (0x3F0000), + RX_MPDU_RES_STATUS_STA_ID_MSK = (0x1f000000), + RX_MPDU_RES_STATUS_RRF_KILL = BIT(29), + RX_MPDU_RES_STATUS_FILTERING_MSK = (0xc00000), + RX_MPDU_RES_STATUS2_FILTERING_MSK = (0xc0000000), +}; + +/** + * struct iwl_radio_version_notif - information on the radio version + * ( RADIO_VERSION_NOTIFICATION = 0x68 ) + * @radio_flavor: + * @radio_step: + * @radio_dash: + */ +struct iwl_radio_version_notif { + __le32 radio_flavor; + __le32 radio_step; + __le32 radio_dash; +} __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */ + +enum iwl_card_state_flags { + CARD_ENABLED = 0x00, + HW_CARD_DISABLED = 0x01, + SW_CARD_DISABLED = 0x02, + CT_KILL_CARD_DISABLED = 0x04, + HALT_CARD_DISABLED = 0x08, + CARD_DISABLED_MSK = 0x0f, + CARD_IS_RX_ON = 0x10, +}; + +/** + * struct iwl_radio_version_notif - information on the radio version + * ( CARD_STATE_NOTIFICATION = 0xa1 ) + * @flags: %iwl_card_state_flags + */ +struct iwl_card_state_notif { + __le32 flags; +} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ + +/** + * struct iwl_set_calib_default_cmd - set default value for calibration. + * ( SET_CALIB_DEFAULT_CMD = 0x8e ) + * @calib_index: the calibration to set value for + * @length: of data + * @data: the value to set for the calibration result + */ +struct iwl_set_calib_default_cmd { + __le16 calib_index; + __le16 length; + u8 data[0]; +} __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */ + +#endif /* __fw_api_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c new file mode 100644 index 0000000..90473c2 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -0,0 +1,644 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include + +#include "iwl-trans.h" +#include "iwl-op-mode.h" +#include "iwl-fw.h" +#include "iwl-debug.h" +#include "iwl-csr.h" /* for iwl_mvm_rx_card_state_notif */ +#include "iwl-io.h" /* for iwl_mvm_rx_card_state_notif */ +#include "iwl-eeprom-parse.h" + +#include "mvm.h" +#include "iwl-phy-db.h" + +#define MVM_UCODE_ALIVE_TIMEOUT HZ +#define MVM_UCODE_CALIB_TIMEOUT (2*HZ) + +#define UCODE_VALID_OK cpu_to_le32(0x1) + +/* Default calibration values for WkP - set to INIT image w/o running */ +static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f, + 0x00, 0x18, 0x00 }; +static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0x7f, 0x7f }; +static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 }; +static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00, + 0x00 }; +static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 }; +static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 }; +static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 }; +static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 }; + +struct iwl_calib_default_data { + u16 size; + void *data; +}; + +#define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf} + +static const struct iwl_calib_default_data wkp_calib_default_data[12] = { + [5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc), + [6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter), + [7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo), + [8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq), + [9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew), + [10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq), + [11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew), +}; + +struct iwl_mvm_alive_data { + bool valid; + u32 scd_base_addr; +}; + +static inline const struct fw_img * +iwl_get_ucode_image(struct iwl_mvm *mvm, enum iwl_ucode_type ucode_type) +{ + if (ucode_type >= IWL_UCODE_TYPE_MAX) + return NULL; + + return &mvm->fw->img[ucode_type]; +} + +static int iwl_send_tx_ant_cfg(struct iwl_mvm *mvm, u8 valid_tx_ant) +{ + struct iwl_tx_ant_cfg_cmd tx_ant_cmd = { + .valid = cpu_to_le32(valid_tx_ant), + }; + + IWL_DEBUG_HC(mvm, "select valid tx ant: %u\n", valid_tx_ant); + return iwl_mvm_send_cmd_pdu(mvm, TX_ANT_CONFIGURATION_CMD, CMD_SYNC, + sizeof(tx_ant_cmd), &tx_ant_cmd); +} + +static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_mvm *mvm = + container_of(notif_wait, struct iwl_mvm, notif_wait); + struct iwl_mvm_alive_data *alive_data = data; + struct mvm_alive_resp *palive; + + palive = (void *)pkt->data; + + mvm->error_event_table = le32_to_cpu(palive->error_event_table_ptr); + mvm->log_event_table = le32_to_cpu(palive->log_event_table_ptr); + alive_data->scd_base_addr = le32_to_cpu(palive->scd_base_ptr); + + alive_data->valid = le16_to_cpu(palive->status) == IWL_ALIVE_STATUS_OK; + IWL_DEBUG_FW(mvm, "Alive ucode status 0x%04x revision 0x%01X 0x%01X\n", + le16_to_cpu(palive->status), palive->ver_type, + palive->ver_subtype); + + return true; +} + +static bool iwl_wait_phy_db_entry(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_phy_db *phy_db = data; + + if (pkt->hdr.cmd != CALIB_RES_NOTIF_PHY_DB) { + WARN_ON(pkt->hdr.cmd != INIT_COMPLETE_NOTIF); + return true; + } + + WARN_ON(iwl_phy_db_set_section(phy_db, pkt, GFP_ATOMIC)); + + return false; +} + +static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm, + enum iwl_ucode_type ucode_type) +{ + struct iwl_notification_wait alive_wait; + struct iwl_mvm_alive_data alive_data; + const struct fw_img *fw; + int ret, i; + enum iwl_ucode_type old_type = mvm->cur_ucode; + static const u8 alive_cmd[] = { MVM_ALIVE }; + + mvm->cur_ucode = ucode_type; + fw = iwl_get_ucode_image(mvm, ucode_type); + + mvm->ucode_loaded = false; + + if (!fw) + return -EINVAL; + + iwl_init_notification_wait(&mvm->notif_wait, &alive_wait, + alive_cmd, ARRAY_SIZE(alive_cmd), + iwl_alive_fn, &alive_data); + + ret = iwl_trans_start_fw(mvm->trans, fw, ucode_type == IWL_UCODE_INIT); + if (ret) { + mvm->cur_ucode = old_type; + iwl_remove_notification(&mvm->notif_wait, &alive_wait); + return ret; + } + + /* + * Some things may run in the background now, but we + * just wait for the ALIVE notification here. + */ + ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait, + MVM_UCODE_ALIVE_TIMEOUT); + if (ret) { + mvm->cur_ucode = old_type; + return ret; + } + + if (!alive_data.valid) { + IWL_ERR(mvm, "Loaded ucode is not valid!\n"); + mvm->cur_ucode = old_type; + return -EIO; + } + + iwl_trans_fw_alive(mvm->trans, alive_data.scd_base_addr); + + /* + * Note: all the queues are enabled as part of the interface + * initialization, but in firmware restart scenarios they + * could be stopped, so wake them up. In firmware restart, + * mac80211 will have the queues stopped as well until the + * reconfiguration completes. During normal startup, they + * will be empty. + */ + + for (i = 0; i < IWL_MAX_HW_QUEUES; i++) { + if (i < IWL_MVM_FIRST_AGG_QUEUE && i != IWL_MVM_CMD_QUEUE) + mvm->queue_to_mac80211[i] = i; + else + mvm->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE; + atomic_set(&mvm->queue_stop_count[i], 0); + } + + mvm->transport_queue_stop = 0; + + mvm->ucode_loaded = true; + + return 0; +} +#define IWL_HW_REV_ID_RAINBOW 0x2 +#define IWL_PROJ_TYPE_LHP 0x5 + +static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm) +{ + struct iwl_nvm_data *data = mvm->nvm_data; + /* Temp calls to static definitions, will be changed to CSR calls */ + u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW; + u8 project_type = IWL_PROJ_TYPE_LHP; + + return data->radio_cfg_dash | (data->radio_cfg_step << 2) | + (hw_rev_id << 4) | ((project_type & 0x7f) << 6) | + (data->valid_tx_ant << 16) | (data->valid_rx_ant << 20); +} + +static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) +{ + struct iwl_phy_cfg_cmd phy_cfg_cmd; + enum iwl_ucode_type ucode_type = mvm->cur_ucode; + + /* Set parameters */ + phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm)); + phy_cfg_cmd.calib_control.event_trigger = + mvm->fw->default_calib[ucode_type].event_trigger; + phy_cfg_cmd.calib_control.flow_trigger = + mvm->fw->default_calib[ucode_type].flow_trigger; + + IWL_DEBUG_INFO(mvm, "Sending Phy CFG command: 0x%x\n", + phy_cfg_cmd.phy_cfg); + + return iwl_mvm_send_cmd_pdu(mvm, PHY_CONFIGURATION_CMD, CMD_SYNC, + sizeof(phy_cfg_cmd), &phy_cfg_cmd); +} + +/* Starting with the new PHY DB implementation - New calibs are enabled */ +/* Value - 0x405e7 */ +#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\ + IWL_CALIB_CFG_TEMPERATURE_IDX |\ + IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ + IWL_CALIB_CFG_DC_IDX |\ + IWL_CALIB_CFG_BB_FILTER_IDX |\ + IWL_CALIB_CFG_LO_LEAKAGE_IDX |\ + IWL_CALIB_CFG_TX_IQ_IDX |\ + IWL_CALIB_CFG_RX_IQ_IDX |\ + IWL_CALIB_CFG_AGC_IDX) + +#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0 + +/* Value 0x41567 */ +#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\ + IWL_CALIB_CFG_TEMPERATURE_IDX |\ + IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ + IWL_CALIB_CFG_BB_FILTER_IDX |\ + IWL_CALIB_CFG_DC_IDX |\ + IWL_CALIB_CFG_TX_IQ_IDX |\ + IWL_CALIB_CFG_RX_IQ_IDX |\ + IWL_CALIB_CFG_SENSITIVITY_IDX |\ + IWL_CALIB_CFG_AGC_IDX) + +#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\ + IWL_CALIB_CFG_TEMPERATURE_IDX |\ + IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ + IWL_CALIB_CFG_TX_PWR_IDX |\ + IWL_CALIB_CFG_DC_IDX |\ + IWL_CALIB_CFG_TX_IQ_IDX |\ + IWL_CALIB_CFG_SENSITIVITY_IDX) + +/* + * Sets the calibrations trigger values that will be sent to the FW for runtime + * and init calibrations. + * The ones given in the FW TLV are not correct. + */ +static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm) +{ + struct iwl_tlv_calib_ctrl default_calib; + + /* + * WkP FW TLV calib bits are wrong, overwrite them. + * This defines the dynamic calibrations which are implemented in the + * uCode both for init(flow) calculation and event driven calibs. + */ + + /* Init Image */ + default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT); + default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT); + + if (default_calib.event_trigger != + mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger) + IWL_ERR(mvm, + "Updating the event calib for INIT image: 0x%x -> 0x%x\n", + mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger, + default_calib.event_trigger); + if (default_calib.flow_trigger != + mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger) + IWL_ERR(mvm, + "Updating the flow calib for INIT image: 0x%x -> 0x%x\n", + mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger, + default_calib.flow_trigger); + + memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT], + &default_calib, sizeof(struct iwl_tlv_calib_ctrl)); + IWL_ERR(mvm, + "Setting uCode init calibrations event 0x%x, trigger 0x%x\n", + default_calib.event_trigger, + default_calib.flow_trigger); + + /* Run time image */ + default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN); + default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN); + + if (default_calib.event_trigger != + mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger) + IWL_ERR(mvm, + "Updating the event calib for RT image: 0x%x -> 0x%x\n", + mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger, + default_calib.event_trigger); + if (default_calib.flow_trigger != + mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger) + IWL_ERR(mvm, + "Updating the flow calib for RT image: 0x%x -> 0x%x\n", + mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger, + default_calib.flow_trigger); + + memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR], + &default_calib, sizeof(struct iwl_tlv_calib_ctrl)); + IWL_ERR(mvm, + "Setting uCode runtime calibs event 0x%x, trigger 0x%x\n", + default_calib.event_trigger, + default_calib.flow_trigger); +} + +static int iwl_set_default_calibrations(struct iwl_mvm *mvm) +{ + u8 cmd_raw[16]; /* holds the variable size commands */ + struct iwl_set_calib_default_cmd *cmd = + (struct iwl_set_calib_default_cmd *)cmd_raw; + int ret, i; + + /* Setting default values for calibrations we don't run */ + for (i = 0; i < ARRAY_SIZE(wkp_calib_default_data); i++) { + u16 cmd_len; + + if (wkp_calib_default_data[i].size == 0) + continue; + + memset(cmd_raw, 0, sizeof(cmd_raw)); + cmd_len = wkp_calib_default_data[i].size + sizeof(cmd); + cmd->calib_index = cpu_to_le16(i); + cmd->length = cpu_to_le16(wkp_calib_default_data[i].size); + if (WARN_ONCE(cmd_len > sizeof(cmd_raw), + "Need to enlarge cmd_raw to %d\n", cmd_len)) + break; + memcpy(cmd->data, wkp_calib_default_data[i].data, + wkp_calib_default_data[i].size); + ret = iwl_mvm_send_cmd_pdu(mvm, SET_CALIB_DEFAULT_CMD, 0, + sizeof(*cmd) + + wkp_calib_default_data[i].size, + cmd); + if (ret) + return ret; + } + + return 0; +} + +int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) +{ + struct iwl_notification_wait calib_wait; + static const u8 init_complete[] = { + INIT_COMPLETE_NOTIF, + CALIB_RES_NOTIF_PHY_DB + }; + int ret; + + lockdep_assert_held(&mvm->mutex); + + if (mvm->init_ucode_run) + return 0; + + iwl_init_notification_wait(&mvm->notif_wait, + &calib_wait, + init_complete, + ARRAY_SIZE(init_complete), + iwl_wait_phy_db_entry, + mvm->phy_db); + + /* Will also start the device */ + ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_INIT); + if (ret) { + IWL_ERR(mvm, "Failed to start INIT ucode: %d\n", ret); + goto error; + } + + if (read_nvm) { + /* Read nvm */ + ret = iwl_nvm_init(mvm); + if (ret) { + IWL_ERR(mvm, "Failed to read NVM: %d\n", ret); + goto error; + } + } + + ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans); + WARN_ON(ret); + + /* Override the calibrations from TLV and the const of fw */ + iwl_set_default_calib_trigger(mvm); + + /* WkP doesn't have all calibrations, need to set default values */ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + ret = iwl_set_default_calibrations(mvm); + if (ret) + goto error; + } + + /* + * Send phy configurations command to init uCode + * to start the 16.0 uCode init image internal calibrations. + */ + ret = iwl_send_phy_cfg_cmd(mvm); + if (ret) { + IWL_ERR(mvm, "Failed to run INIT calibrations: %d\n", + ret); + goto error; + } + + /* + * Some things may run in the background now, but we + * just wait for the calibration complete notification. + */ + ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, + MVM_UCODE_CALIB_TIMEOUT); + if (!ret) + mvm->init_ucode_run = true; + goto out; + +error: + iwl_remove_notification(&mvm->notif_wait, &calib_wait); +out: + if (!iwlmvm_mod_params.init_dbg) { + iwl_trans_stop_device(mvm->trans); + } else if (!mvm->nvm_data) { + /* we want to debug INIT and we have no NVM - fake */ + mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) + + sizeof(struct ieee80211_channel) + + sizeof(struct ieee80211_rate), + GFP_KERNEL); + if (!mvm->nvm_data) + return -ENOMEM; + mvm->nvm_data->valid_rx_ant = 1; + mvm->nvm_data->valid_tx_ant = 1; + mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; + mvm->nvm_data->bands[0].n_channels = 1; + mvm->nvm_data->bands[0].n_bitrates = 1; + mvm->nvm_data->bands[0].bitrates = + (void *)mvm->nvm_data->channels + 1; + mvm->nvm_data->bands[0].bitrates->hw_value = 10; + } + + return ret; +} + +#define UCODE_CALIB_TIMEOUT (2*HZ) + +int iwl_mvm_up(struct iwl_mvm *mvm) +{ + int ret, i; + + lockdep_assert_held(&mvm->mutex); + + ret = iwl_trans_start_hw(mvm->trans); + if (ret) + return ret; + + /* If we were in RFKILL during module loading, load init ucode now */ + if (!mvm->init_ucode_run) { + ret = iwl_run_init_mvm_ucode(mvm, false); + if (ret && !iwlmvm_mod_params.init_dbg) { + IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); + goto error; + } + } + + if (iwlmvm_mod_params.init_dbg) + return 0; + + ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_REGULAR); + if (ret) { + IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret); + goto error; + } + + ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant); + if (ret) + goto error; + + /* Send phy db control command and then phy db calibration*/ + ret = iwl_send_phy_db_data(mvm->phy_db); + if (ret) + goto error; + + ret = iwl_send_phy_cfg_cmd(mvm); + if (ret) + goto error; + + /* init the fw <-> mac80211 STA mapping */ + for (i = 0; i < IWL_MVM_STATION_COUNT; i++) + RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); + + /* Add auxiliary station for scanning */ + ret = iwl_mvm_add_aux_sta(mvm); + if (ret) + goto error; + + IWL_DEBUG_INFO(mvm, "RT uCode started.\n"); + + return 0; + error: + iwl_trans_stop_device(mvm->trans); + return ret; +} + +int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm) +{ + int ret, i; + + lockdep_assert_held(&mvm->mutex); + + ret = iwl_trans_start_hw(mvm->trans); + if (ret) + return ret; + + ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_WOWLAN); + if (ret) { + IWL_ERR(mvm, "Failed to start WoWLAN firmware: %d\n", ret); + goto error; + } + + ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant); + if (ret) + goto error; + + /* Send phy db control command and then phy db calibration*/ + ret = iwl_send_phy_db_data(mvm->phy_db); + if (ret) + goto error; + + ret = iwl_send_phy_cfg_cmd(mvm); + if (ret) + goto error; + + /* init the fw <-> mac80211 STA mapping */ + for (i = 0; i < IWL_MVM_STATION_COUNT; i++) + RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); + + /* Add auxiliary station for scanning */ + ret = iwl_mvm_add_aux_sta(mvm); + if (ret) + goto error; + + return 0; + error: + iwl_trans_stop_device(mvm->trans); + return ret; +} + +int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_card_state_notif *card_state_notif = (void *)pkt->data; + u32 flags = le32_to_cpu(card_state_notif->flags); + + IWL_DEBUG_RF_KILL(mvm, "Card state received: HW:%s SW:%s CT:%s\n", + (flags & HW_CARD_DISABLED) ? "Kill" : "On", + (flags & SW_CARD_DISABLED) ? "Kill" : "On", + (flags & CT_KILL_CARD_DISABLED) ? + "Reached" : "Not reached"); + + if (flags & CARD_DISABLED_MSK) + iwl_write32(mvm->trans, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + return 0; +} + +int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_radio_version_notif *radio_version = (void *)pkt->data; + + /* TODO: what to do with that? */ + IWL_DEBUG_INFO(mvm, + "Radio version: flavor: 0x%08x, step 0x%08x, dash 0x%08x\n", + le32_to_cpu(radio_version->radio_flavor), + le32_to_cpu(radio_version->radio_step), + le32_to_cpu(radio_version->radio_dash)); + return 0; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/led.c b/drivers/net/wireless/iwlwifi/mvm/led.c new file mode 100644 index 0000000..011906e --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/led.c @@ -0,0 +1,134 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include "iwl-io.h" +#include "iwl-csr.h" +#include "mvm.h" + +/* Set led register on */ +static void iwl_mvm_led_enable(struct iwl_mvm *mvm) +{ + iwl_write32(mvm->trans, CSR_LED_REG, CSR_LED_REG_TURN_ON); +} + +/* Set led register off */ +static void iwl_mvm_led_disable(struct iwl_mvm *mvm) +{ + iwl_write32(mvm->trans, CSR_LED_REG, CSR_LED_REG_TURN_OFF); +} + +static void iwl_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct iwl_mvm *mvm = container_of(led_cdev, struct iwl_mvm, led); + if (brightness > 0) + iwl_mvm_led_enable(mvm); + else + iwl_mvm_led_disable(mvm); +} + +int iwl_mvm_leds_init(struct iwl_mvm *mvm) +{ + int mode = iwlwifi_mod_params.led_mode; + int ret; + + switch (mode) { + case IWL_LED_DEFAULT: + case IWL_LED_RF_STATE: + mode = IWL_LED_RF_STATE; + break; + case IWL_LED_DISABLE: + IWL_INFO(mvm, "Led disabled\n"); + return 0; + default: + return -EINVAL; + }; + + mvm->led.name = kasprintf(GFP_KERNEL, "%s-led", + wiphy_name(mvm->hw->wiphy)); + mvm->led.brightness_set = iwl_led_brightness_set; + mvm->led.max_brightness = 1; + + if (mode == IWL_LED_RF_STATE) + mvm->led.default_trigger = + ieee80211_get_radio_led_name(mvm->hw); + + ret = led_classdev_register(mvm->trans->dev, &mvm->led); + if (ret) { + kfree(mvm->led.name); + IWL_INFO(mvm, "Failed to enable led\n"); + return ret; + } + + return 0; +} + +void iwl_mvm_leds_exit(struct iwl_mvm *mvm) +{ + if (iwlwifi_mod_params.led_mode == IWL_LED_DISABLE) + return; + + led_classdev_unregister(&mvm->led); + kfree(mvm->led.name); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c new file mode 100644 index 0000000..c08a17a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -0,0 +1,951 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include +#include "iwl-io.h" +#include "iwl-prph.h" +#include "fw-api.h" +#include "mvm.h" + +const u8 iwl_mvm_ac_to_tx_fifo[] = { + IWL_MVM_TX_FIFO_BK, + IWL_MVM_TX_FIFO_BE, + IWL_MVM_TX_FIFO_VI, + IWL_MVM_TX_FIFO_VO, +}; + +struct iwl_mvm_mac_iface_iterator_data { + struct iwl_mvm *mvm; + struct ieee80211_vif *vif; + unsigned long available_mac_ids[BITS_TO_LONGS(NUM_MAC_INDEX_DRIVER)]; + unsigned long available_tsf_ids[BITS_TO_LONGS(NUM_TSF_IDS)]; + unsigned long used_hw_queues[BITS_TO_LONGS(IWL_MVM_FIRST_AGG_QUEUE)]; + enum iwl_tsf_id preferred_tsf; + bool found_vif; +}; + +static void iwl_mvm_mac_iface_iterator(void *_data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_mac_iface_iterator_data *data = _data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + u32 ac; + + /* Iterator may already find the interface being added -- skip it */ + if (vif == data->vif) { + data->found_vif = true; + return; + } + + /* Mark the queues used by the vif */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + if (vif->hw_queue[ac] != IEEE80211_INVAL_HW_QUEUE) + __set_bit(vif->hw_queue[ac], data->used_hw_queues); + + if (vif->cab_queue != IEEE80211_INVAL_HW_QUEUE) + __set_bit(vif->cab_queue, data->used_hw_queues); + + /* + * Mark MAC IDs as used by clearing the available bit, and + * (below) mark TSFs as used if their existing use is not + * compatible with the new interface type. + * No locking or atomic bit operations are needed since the + * data is on the stack of the caller function. + */ + __clear_bit(mvmvif->id, data->available_mac_ids); + + /* + * The TSF is a hardware/firmware resource, there are 4 and + * the driver should assign and free them as needed. However, + * there are cases where 2 MACs should share the same TSF ID + * for the purpose of clock sync, an optimization to avoid + * clock drift causing overlapping TBTTs/DTIMs for a GO and + * client in the system. + * + * The firmware will decide according to the MAC type which + * will be the master and slave. Clients that need to sync + * with a remote station will be the master, and an AP or GO + * will be the slave. + * + * Depending on the new interface type it can be slaved to + * or become the master of an existing interface. + */ + switch (data->vif->type) { + case NL80211_IFTYPE_STATION: + /* + * The new interface is client, so if the existing one + * we're iterating is an AP, the TSF should be used to + * avoid drift between the new client and existing AP, + * the existing AP will get drift updates from the new + * client context in this case + */ + if (vif->type == NL80211_IFTYPE_AP) { + if (data->preferred_tsf == NUM_TSF_IDS && + test_bit(mvmvif->tsf_id, data->available_tsf_ids)) + data->preferred_tsf = mvmvif->tsf_id; + return; + } + break; + case NL80211_IFTYPE_AP: + /* + * The new interface is AP/GO, so should get drift + * updates from an existing client or use the same + * TSF as an existing GO. There's no drift between + * TSFs internally but if they used different TSFs + * then a new client MAC could update one of them + * and cause drift that way. + */ + if (vif->type == NL80211_IFTYPE_STATION || + vif->type == NL80211_IFTYPE_AP) { + if (data->preferred_tsf == NUM_TSF_IDS && + test_bit(mvmvif->tsf_id, data->available_tsf_ids)) + data->preferred_tsf = mvmvif->tsf_id; + return; + } + break; + default: + /* + * For all other interface types there's no need to + * take drift into account. Either they're exclusive + * like IBSS and monitor, or we don't care much about + * their TSF (like P2P Device), but we won't be able + * to share the TSF resource. + */ + break; + } + + /* + * Unless we exited above, we can't share the TSF resource + * that the virtual interface we're iterating over is using + * with the new one, so clear the available bit and if this + * was the preferred one, reset that as well. + */ + __clear_bit(mvmvif->tsf_id, data->available_tsf_ids); + + if (data->preferred_tsf == mvmvif->tsf_id) + data->preferred_tsf = NUM_TSF_IDS; +} + +/* + * Get the mask of the queus used by the vif + */ +u32 iwl_mvm_mac_get_queues_mask(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + u32 qmask, ac; + + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) + return BIT(IWL_OFFCHANNEL_QUEUE); + + qmask = (vif->cab_queue != IEEE80211_INVAL_HW_QUEUE) ? + BIT(vif->cab_queue) : 0; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + if (vif->hw_queue[ac] != IEEE80211_INVAL_HW_QUEUE) + qmask |= BIT(vif->hw_queue[ac]); + + return qmask; +} + +static int iwl_mvm_mac_ctxt_allocate_resources(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_mac_iface_iterator_data data = { + .mvm = mvm, + .vif = vif, + .available_mac_ids = { (1 << NUM_MAC_INDEX_DRIVER) - 1 }, + .available_tsf_ids = { (1 << NUM_TSF_IDS) - 1 }, + /* no preference yet */ + .preferred_tsf = NUM_TSF_IDS, + .used_hw_queues = { + BIT(IWL_MVM_OFFCHANNEL_QUEUE) | + BIT(IWL_MVM_AUX_QUEUE) | + BIT(IWL_MVM_CMD_QUEUE) + }, + .found_vif = false, + }; + u32 ac; + int ret; + + /* + * Allocate a MAC ID and a TSF for this MAC, along with the queues + * and other resources. + */ + + /* + * Before the iterator, we start with all MAC IDs and TSFs available. + * + * During iteration, all MAC IDs are cleared that are in use by other + * virtual interfaces, and all TSF IDs are cleared that can't be used + * by this new virtual interface because they're used by an interface + * that can't share it with the new one. + * At the same time, we check if there's a preferred TSF in the case + * that we should share it with another interface. + */ + + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + iwl_mvm_mac_iface_iterator, &data); + + /* + * In the case we're getting here during resume, it's similar to + * firmware restart, and with RESUME_ALL the iterator will find + * the vif being added already. + * We don't want to reassign any IDs in either case since doing + * so would probably assign different IDs (as interfaces aren't + * necessarily added in the same order), but the old IDs were + * preserved anyway, so skip ID assignment for both resume and + * recovery. + */ + if (data.found_vif) + return 0; + + /* Therefore, in recovery, we can't get here */ + WARN_ON_ONCE(test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)); + + mvmvif->id = find_first_bit(data.available_mac_ids, + NUM_MAC_INDEX_DRIVER); + if (mvmvif->id == NUM_MAC_INDEX_DRIVER) { + IWL_ERR(mvm, "Failed to init MAC context - no free ID!\n"); + ret = -EIO; + goto exit_fail; + } + + if (data.preferred_tsf != NUM_TSF_IDS) + mvmvif->tsf_id = data.preferred_tsf; + else + mvmvif->tsf_id = find_first_bit(data.available_tsf_ids, + NUM_TSF_IDS); + if (mvmvif->tsf_id == NUM_TSF_IDS) { + IWL_ERR(mvm, "Failed to init MAC context - no free TSF!\n"); + ret = -EIO; + goto exit_fail; + } + + mvmvif->color = 0; + + /* No need to allocate data queues to P2P Device MAC.*/ + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) { + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + vif->hw_queue[ac] = IEEE80211_INVAL_HW_QUEUE; + + return 0; + } + + /* Find available queues, and allocate them to the ACs */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + u8 queue = find_first_zero_bit(data.used_hw_queues, + IWL_MVM_FIRST_AGG_QUEUE); + + if (queue >= IWL_MVM_FIRST_AGG_QUEUE) { + IWL_ERR(mvm, "Failed to allocate queue\n"); + ret = -EIO; + goto exit_fail; + } + + __set_bit(queue, data.used_hw_queues); + vif->hw_queue[ac] = queue; + } + + /* Allocate the CAB queue for softAP and GO interfaces */ + if (vif->type == NL80211_IFTYPE_AP) { + u8 queue = find_first_zero_bit(data.used_hw_queues, + IWL_MVM_FIRST_AGG_QUEUE); + + if (queue >= IWL_MVM_FIRST_AGG_QUEUE) { + IWL_ERR(mvm, "Failed to allocate cab queue\n"); + ret = -EIO; + goto exit_fail; + } + + vif->cab_queue = queue; + } else { + vif->cab_queue = IEEE80211_INVAL_HW_QUEUE; + } + + mvmvif->bcast_sta.sta_id = IWL_MVM_STATION_COUNT; + mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT; + + INIT_LIST_HEAD(&mvmvif->time_event_data.list); + mvmvif->time_event_data.id = TE_MAX; + + return 0; + +exit_fail: + memset(mvmvif, 0, sizeof(struct iwl_mvm_vif)); + memset(vif->hw_queue, IEEE80211_INVAL_HW_QUEUE, sizeof(vif->hw_queue)); + vif->cab_queue = IEEE80211_INVAL_HW_QUEUE; + return ret; +} + +int iwl_mvm_mac_ctxt_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + u32 ac; + int ret; + + lockdep_assert_held(&mvm->mutex); + + ret = iwl_mvm_mac_ctxt_allocate_resources(mvm, vif); + if (ret) + return ret; + + switch (vif->type) { + case NL80211_IFTYPE_P2P_DEVICE: + iwl_trans_ac_txq_enable(mvm->trans, IWL_MVM_OFFCHANNEL_QUEUE, + IWL_MVM_TX_FIFO_VO); + break; + case NL80211_IFTYPE_AP: + iwl_trans_ac_txq_enable(mvm->trans, vif->cab_queue, + IWL_MVM_TX_FIFO_VO); + /* fall through */ + default: + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + iwl_trans_ac_txq_enable(mvm->trans, vif->hw_queue[ac], + iwl_mvm_ac_to_tx_fifo[ac]); + break; + } + + return 0; +} + +void iwl_mvm_mac_ctxt_release(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + int ac; + + lockdep_assert_held(&mvm->mutex); + + switch (vif->type) { + case NL80211_IFTYPE_P2P_DEVICE: + iwl_trans_txq_disable(mvm->trans, IWL_MVM_OFFCHANNEL_QUEUE); + break; + case NL80211_IFTYPE_AP: + iwl_trans_txq_disable(mvm->trans, vif->cab_queue); + /* fall through */ + default: + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + iwl_trans_txq_disable(mvm->trans, vif->hw_queue[ac]); + } +} + +static void iwl_mvm_ack_rates(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + enum ieee80211_band band, + u8 *cck_rates, u8 *ofdm_rates) +{ + struct ieee80211_supported_band *sband; + unsigned long basic = vif->bss_conf.basic_rates; + int lowest_present_ofdm = 100; + int lowest_present_cck = 100; + u8 cck = 0; + u8 ofdm = 0; + int i; + + sband = mvm->hw->wiphy->bands[band]; + + for_each_set_bit(i, &basic, BITS_PER_LONG) { + int hw = sband->bitrates[i].hw_value; + if (hw >= IWL_FIRST_OFDM_RATE) { + ofdm |= BIT(hw - IWL_FIRST_OFDM_RATE); + if (lowest_present_ofdm > hw) + lowest_present_ofdm = hw; + } else { + BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0); + + cck |= BIT(hw); + if (lowest_present_cck > hw) + lowest_present_cck = hw; + } + } + + /* + * Now we've got the basic rates as bitmaps in the ofdm and cck + * variables. This isn't sufficient though, as there might not + * be all the right rates in the bitmap. E.g. if the only basic + * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps + * and 6 Mbps because the 802.11-2007 standard says in 9.6: + * + * [...] a STA responding to a received frame shall transmit + * its Control Response frame [...] at the highest rate in the + * BSSBasicRateSet parameter that is less than or equal to the + * rate of the immediately previous frame in the frame exchange + * sequence ([...]) and that is of the same modulation class + * ([...]) as the received frame. If no rate contained in the + * BSSBasicRateSet parameter meets these conditions, then the + * control frame sent in response to a received frame shall be + * transmitted at the highest mandatory rate of the PHY that is + * less than or equal to the rate of the received frame, and + * that is of the same modulation class as the received frame. + * + * As a consequence, we need to add all mandatory rates that are + * lower than all of the basic rates to these bitmaps. + */ + + if (IWL_RATE_24M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_BIT_MSK(24) >> IWL_FIRST_OFDM_RATE; + if (IWL_RATE_12M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_BIT_MSK(12) >> IWL_FIRST_OFDM_RATE; + /* 6M already there or needed so always add */ + ofdm |= IWL_RATE_BIT_MSK(6) >> IWL_FIRST_OFDM_RATE; + + /* + * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP. + * Note, however: + * - if no CCK rates are basic, it must be ERP since there must + * be some basic rates at all, so they're OFDM => ERP PHY + * (or we're in 5 GHz, and the cck bitmap will never be used) + * - if 11M is a basic rate, it must be ERP as well, so add 5.5M + * - if 5.5M is basic, 1M and 2M are mandatory + * - if 2M is basic, 1M is mandatory + * - if 1M is basic, that's the only valid ACK rate. + * As a consequence, it's not as complicated as it sounds, just add + * any lower rates to the ACK rate bitmap. + */ + if (IWL_RATE_11M_INDEX < lowest_present_cck) + cck |= IWL_RATE_BIT_MSK(11) >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_5M_INDEX < lowest_present_cck) + cck |= IWL_RATE_BIT_MSK(5) >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_2M_INDEX < lowest_present_cck) + cck |= IWL_RATE_BIT_MSK(2) >> IWL_FIRST_CCK_RATE; + /* 1M already there or needed so always add */ + cck |= IWL_RATE_BIT_MSK(1) >> IWL_FIRST_CCK_RATE; + + *cck_rates = cck; + *ofdm_rates = ofdm; +} + +static void iwl_mvm_mac_ctxt_cmd_common(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_mac_ctx_cmd *cmd, + u32 action) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct ieee80211_chanctx_conf *chanctx; + u8 cck_ack_rates, ofdm_ack_rates; + int i; + + cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color)); + cmd->action = cpu_to_le32(action); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + if (vif->p2p) + cmd->mac_type = cpu_to_le32(FW_MAC_TYPE_P2P_STA); + else + cmd->mac_type = cpu_to_le32(FW_MAC_TYPE_BSS_STA); + break; + case NL80211_IFTYPE_AP: + cmd->mac_type = cpu_to_le32(FW_MAC_TYPE_GO); + break; + case NL80211_IFTYPE_MONITOR: + cmd->mac_type = cpu_to_le32(FW_MAC_TYPE_LISTENER); + break; + case NL80211_IFTYPE_P2P_DEVICE: + cmd->mac_type = cpu_to_le32(FW_MAC_TYPE_P2P_DEVICE); + break; + case NL80211_IFTYPE_ADHOC: + cmd->mac_type = cpu_to_le32(FW_MAC_TYPE_IBSS); + break; + default: + WARN_ON_ONCE(1); + } + + cmd->tsf_id = cpu_to_le32(mvmvif->tsf_id); + + memcpy(cmd->node_addr, vif->addr, ETH_ALEN); + if (vif->bss_conf.bssid) + memcpy(cmd->bssid_addr, vif->bss_conf.bssid, ETH_ALEN); + else + eth_broadcast_addr(cmd->bssid_addr); + + rcu_read_lock(); + chanctx = rcu_dereference(vif->chanctx_conf); + iwl_mvm_ack_rates(mvm, vif, chanctx ? chanctx->def.chan->band + : IEEE80211_BAND_2GHZ, + &cck_ack_rates, &ofdm_ack_rates); + rcu_read_unlock(); + + cmd->cck_rates = cpu_to_le32((u32)cck_ack_rates); + cmd->ofdm_rates = cpu_to_le32((u32)ofdm_ack_rates); + + cmd->cck_short_preamble = + cpu_to_le32(vif->bss_conf.use_short_preamble ? + MAC_FLG_SHORT_PREAMBLE : 0); + cmd->short_slot = + cpu_to_le32(vif->bss_conf.use_short_slot ? + MAC_FLG_SHORT_SLOT : 0); + + for (i = 0; i < AC_NUM; i++) { + cmd->ac[i].cw_min = cpu_to_le16(mvmvif->queue_params[i].cw_min); + cmd->ac[i].cw_max = cpu_to_le16(mvmvif->queue_params[i].cw_max); + cmd->ac[i].aifsn = mvmvif->queue_params[i].aifs; + cmd->ac[i].edca_txop = + cpu_to_le16(mvmvif->queue_params[i].txop * 32); + cmd->ac[i].fifos_mask = BIT(iwl_mvm_ac_to_tx_fifo[i]); + } + + if (vif->bss_conf.qos) + cmd->qos_flags |= cpu_to_le32(MAC_QOS_FLG_UPDATE_EDCA); + + if (vif->bss_conf.use_cts_prot) + cmd->protection_flags |= cpu_to_le32(MAC_PROT_FLG_TGG_PROTECT | + MAC_PROT_FLG_SELF_CTS_EN); + + /* + * I think that we should enable these 2 flags regardless the HT PROT + * fields in the HT IE, but I am not sure. Someone knows whom to ask?... + */ + if (vif->bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { + cmd->qos_flags |= cpu_to_le32(MAC_QOS_FLG_TGN); + cmd->protection_flags |= cpu_to_le32(MAC_PROT_FLG_HT_PROT | + MAC_PROT_FLG_FAT_PROT); + } + + cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP); +} + +static int iwl_mvm_mac_ctxt_send_cmd(struct iwl_mvm *mvm, + struct iwl_mac_ctx_cmd *cmd) +{ + int ret = iwl_mvm_send_cmd_pdu(mvm, MAC_CONTEXT_CMD, CMD_SYNC, + sizeof(*cmd), cmd); + if (ret) + IWL_ERR(mvm, "Failed to send MAC context (action:%d): %d\n", + le32_to_cpu(cmd->action), ret); + return ret; +} + +/* + * Fill the specific data for mac context of type station or p2p client + */ +static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_mac_data_sta *ctxt_sta) +{ + ctxt_sta->is_assoc = cpu_to_le32(vif->bss_conf.assoc ? 1 : 0); + + ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int); + ctxt_sta->bi_reciprocal = + cpu_to_le32(iwl_mvm_reciprocal(vif->bss_conf.beacon_int)); + ctxt_sta->dtim_interval = cpu_to_le32(vif->bss_conf.beacon_int * + vif->bss_conf.dtim_period); + ctxt_sta->dtim_reciprocal = + cpu_to_le32(iwl_mvm_reciprocal(vif->bss_conf.beacon_int * + vif->bss_conf.dtim_period)); + + ctxt_sta->listen_interval = cpu_to_le32(mvm->hw->conf.listen_interval); + ctxt_sta->assoc_id = cpu_to_le32(vif->bss_conf.aid); +} + +static int iwl_mvm_mac_ctxt_cmd_station(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 action) +{ + struct iwl_mac_ctx_cmd cmd = {}; + + WARN_ON(vif->type != NL80211_IFTYPE_STATION || vif->p2p); + + /* Fill the common data for all mac context types */ + iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + + /* Fill the data specific for station mode */ + iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta); + + return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); +} + +static int iwl_mvm_mac_ctxt_cmd_p2p_client(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 action) +{ + struct iwl_mac_ctx_cmd cmd = {}; + + WARN_ON(vif->type != NL80211_IFTYPE_STATION || !vif->p2p); + + /* Fill the common data for all mac context types */ + iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + + /* Fill the data specific for station mode */ + iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta); + + cmd.p2p_sta.ctwin = cpu_to_le32(vif->bss_conf.p2p_ctwindow); + + return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); +} + +static int iwl_mvm_mac_ctxt_cmd_listener(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 action) +{ + struct iwl_mac_ctx_cmd cmd = {}; + + WARN_ON(vif->type != NL80211_IFTYPE_MONITOR); + + iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + /* No other data to be filled */ + return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); +} + +struct iwl_mvm_go_iterator_data { + bool go_active; +}; + +static void iwl_mvm_go_iterator(void *_data, u8 *mac, struct ieee80211_vif *vif) +{ + struct iwl_mvm_go_iterator_data *data = _data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (vif->type == NL80211_IFTYPE_AP && vif->p2p && mvmvif->ap_active) + data->go_active = true; +} + +static int iwl_mvm_mac_ctxt_cmd_p2p_device(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 action) +{ + struct iwl_mac_ctx_cmd cmd = {}; + struct iwl_mvm_go_iterator_data data = {}; + + WARN_ON(vif->type != NL80211_IFTYPE_P2P_DEVICE); + + iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + + cmd.protection_flags |= cpu_to_le32(MAC_PROT_FLG_TGG_PROTECT); + cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_PROMISC); + + /* + * This flag should be set to true when the P2P Device is + * discoverable and there is at least another active P2P GO. Settings + * this flag will allow the P2P Device to be discoverable on other + * channels in addition to its listen channel. + * Note that this flag should not be set in other cases as it opens the + * Rx filters on all MAC and increases the number of interrupts. + */ + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + iwl_mvm_go_iterator, &data); + + cmd.p2p_dev.is_disc_extended = cpu_to_le32(data.go_active ? 1 : 0); + return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); +} + +static void iwl_mvm_mac_ctxt_set_tim(struct iwl_mvm *mvm, + struct iwl_mac_beacon_cmd *beacon_cmd, + u8 *beacon, u32 frame_size) +{ + u32 tim_idx; + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; + + /* The index is relative to frame start but we start looking at the + * variable-length part of the beacon. */ + tim_idx = mgmt->u.beacon.variable - beacon; + + /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ + while ((tim_idx < (frame_size - 2)) && + (beacon[tim_idx] != WLAN_EID_TIM)) + tim_idx += beacon[tim_idx+1] + 2; + + /* If TIM field was found, set variables */ + if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { + beacon_cmd->tim_idx = cpu_to_le32(tim_idx); + beacon_cmd->tim_size = cpu_to_le32((u32)beacon[tim_idx+1]); + } else { + IWL_WARN(mvm, "Unable to find TIM Element in beacon\n"); + } +} + +static int iwl_mvm_mac_ctxt_send_beacon(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct sk_buff *beacon) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_host_cmd cmd = { + .id = BEACON_TEMPLATE_CMD, + .flags = CMD_ASYNC, + }; + struct iwl_mac_beacon_cmd beacon_cmd = {}; + struct ieee80211_tx_info *info; + u32 beacon_skb_len; + u32 rate; + + if (WARN_ON(!beacon)) + return -EINVAL; + + beacon_skb_len = beacon->len; + + /* TODO: for now the beacon template id is set to be the mac context id. + * Might be better to handle it as another resource ... */ + beacon_cmd.template_id = cpu_to_le32((u32)mvmvif->id); + + /* Set up TX command fields */ + beacon_cmd.tx.len = cpu_to_le16((u16)beacon_skb_len); + beacon_cmd.tx.sta_id = mvmvif->bcast_sta.sta_id; + beacon_cmd.tx.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); + beacon_cmd.tx.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | + TX_CMD_FLG_BT_DIS | + TX_CMD_FLG_TSF); + + mvm->mgmt_last_antenna_idx = + iwl_mvm_next_antenna(mvm, mvm->nvm_data->valid_tx_ant, + mvm->mgmt_last_antenna_idx); + + beacon_cmd.tx.rate_n_flags = + cpu_to_le32(BIT(mvm->mgmt_last_antenna_idx) << + RATE_MCS_ANT_POS); + + info = IEEE80211_SKB_CB(beacon); + + if (info->band == IEEE80211_BAND_5GHZ || vif->p2p) { + rate = IWL_FIRST_OFDM_RATE; + } else { + rate = IWL_FIRST_CCK_RATE; + beacon_cmd.tx.rate_n_flags |= cpu_to_le32(RATE_MCS_CCK_MSK); + } + beacon_cmd.tx.rate_n_flags |= + cpu_to_le32(iwl_mvm_mac80211_idx_to_hwrate(rate)); + + /* Set up TX beacon command fields */ + iwl_mvm_mac_ctxt_set_tim(mvm, &beacon_cmd, + beacon->data, + beacon_skb_len); + + /* Submit command */ + cmd.len[0] = sizeof(beacon_cmd); + cmd.data[0] = &beacon_cmd; + cmd.dataflags[0] = 0; + cmd.len[1] = beacon_skb_len; + cmd.data[1] = beacon->data; + cmd.dataflags[1] = IWL_HCMD_DFL_DUP; + + return iwl_mvm_send_cmd(mvm, &cmd); +} + +/* The beacon template for the AP/GO context has changed and needs update */ +int iwl_mvm_mac_ctxt_beacon_changed(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct sk_buff *beacon; + int ret; + + WARN_ON(vif->type != NL80211_IFTYPE_AP); + + beacon = ieee80211_beacon_get(mvm->hw, vif); + if (!beacon) + return -ENOMEM; + + ret = iwl_mvm_mac_ctxt_send_beacon(mvm, vif, beacon); + dev_kfree_skb(beacon); + return ret; +} + +/* + * Fill the specific data for mac context of type AP of P2P GO + */ +static void iwl_mvm_mac_ctxt_cmd_fill_ap(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_mac_data_ap *ctxt_ap) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + u32 curr_dev_time; + + ctxt_ap->bi = cpu_to_le32(vif->bss_conf.beacon_int); + ctxt_ap->bi_reciprocal = + cpu_to_le32(iwl_mvm_reciprocal(vif->bss_conf.beacon_int)); + ctxt_ap->dtim_interval = cpu_to_le32(vif->bss_conf.beacon_int * + vif->bss_conf.dtim_period); + ctxt_ap->dtim_reciprocal = + cpu_to_le32(iwl_mvm_reciprocal(vif->bss_conf.beacon_int * + vif->bss_conf.dtim_period)); + + ctxt_ap->mcast_qid = cpu_to_le32(vif->cab_queue); + curr_dev_time = iwl_read_prph(mvm->trans, DEVICE_SYSTEM_TIME_REG); + ctxt_ap->beacon_time = cpu_to_le32(curr_dev_time); + + ctxt_ap->beacon_tsf = cpu_to_le64(curr_dev_time); + + /* TODO: Assume that the beacon id == mac context id */ + ctxt_ap->beacon_template = cpu_to_le32(mvmvif->id); +} + +static int iwl_mvm_mac_ctxt_cmd_ap(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 action) +{ + struct iwl_mac_ctx_cmd cmd = {}; + + WARN_ON(vif->type != NL80211_IFTYPE_AP || vif->p2p); + + /* Fill the common data for all mac context types */ + iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + + /* Fill the data specific for ap mode */ + iwl_mvm_mac_ctxt_cmd_fill_ap(mvm, vif, &cmd.ap); + + return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); +} + +static int iwl_mvm_mac_ctxt_cmd_go(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 action) +{ + struct iwl_mac_ctx_cmd cmd = {}; + + WARN_ON(vif->type != NL80211_IFTYPE_AP || !vif->p2p); + + /* Fill the common data for all mac context types */ + iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + + /* Fill the data specific for GO mode */ + iwl_mvm_mac_ctxt_cmd_fill_ap(mvm, vif, &cmd.go.ap); + + cmd.go.ctwin = cpu_to_le32(vif->bss_conf.p2p_ctwindow); + cmd.go.opp_ps_enabled = cpu_to_le32(!!vif->bss_conf.p2p_oppps); + + return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); +} + +static int iwl_mvm_mac_ctx_send(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + u32 action) +{ + switch (vif->type) { + case NL80211_IFTYPE_STATION: + if (!vif->p2p) + return iwl_mvm_mac_ctxt_cmd_station(mvm, vif, + action); + else + return iwl_mvm_mac_ctxt_cmd_p2p_client(mvm, vif, + action); + break; + case NL80211_IFTYPE_AP: + if (!vif->p2p) + return iwl_mvm_mac_ctxt_cmd_ap(mvm, vif, action); + else + return iwl_mvm_mac_ctxt_cmd_go(mvm, vif, action); + break; + case NL80211_IFTYPE_MONITOR: + return iwl_mvm_mac_ctxt_cmd_listener(mvm, vif, action); + case NL80211_IFTYPE_P2P_DEVICE: + return iwl_mvm_mac_ctxt_cmd_p2p_device(mvm, vif, action); + default: + break; + } + + return -EOPNOTSUPP; +} + +int iwl_mvm_mac_ctxt_add(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; + + if (WARN_ONCE(mvmvif->uploaded, "Adding active MAC %pM/%d\n", + vif->addr, ieee80211_vif_type_p2p(vif))) + return -EIO; + + ret = iwl_mvm_mac_ctx_send(mvm, vif, FW_CTXT_ACTION_ADD); + if (ret) + return ret; + + mvmvif->uploaded = true; + return 0; +} + +int iwl_mvm_mac_ctxt_changed(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (WARN_ONCE(!mvmvif->uploaded, "Changing inactive MAC %pM/%d\n", + vif->addr, ieee80211_vif_type_p2p(vif))) + return -EIO; + + return iwl_mvm_mac_ctx_send(mvm, vif, FW_CTXT_ACTION_MODIFY); +} + +int iwl_mvm_mac_ctxt_remove(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mac_ctx_cmd cmd; + int ret; + + if (WARN_ONCE(!mvmvif->uploaded, "Removing inactive MAC %pM/%d\n", + vif->addr, ieee80211_vif_type_p2p(vif))) + return -EIO; + + memset(&cmd, 0, sizeof(cmd)); + + cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color)); + cmd.action = cpu_to_le32(FW_CTXT_ACTION_REMOVE); + + ret = iwl_mvm_send_cmd_pdu(mvm, MAC_CONTEXT_CMD, CMD_SYNC, + sizeof(cmd), &cmd); + if (ret) { + IWL_ERR(mvm, "Failed to remove MAC context: %d\n", ret); + return ret; + } + + mvmvif->uploaded = false; + return 0; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c new file mode 100644 index 0000000..a6b05a0 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -0,0 +1,1310 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include + +#include "iwl-op-mode.h" +#include "iwl-io.h" +#include "mvm.h" +#include "sta.h" +#include "time-event.h" +#include "iwl-eeprom-parse.h" +#include "fw-api-scan.h" +#include "iwl-phy-db.h" + +static const struct ieee80211_iface_limit iwl_mvm_limits[] = { + { + .max = 1, + .types = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_P2P_GO), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE), + }, +}; + +static const struct ieee80211_iface_combination iwl_mvm_iface_combinations[] = { + { + .num_different_channels = 1, + .max_interfaces = 3, + .limits = iwl_mvm_limits, + .n_limits = ARRAY_SIZE(iwl_mvm_limits), + }, +}; + +int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) +{ + struct ieee80211_hw *hw = mvm->hw; + int num_mac, ret; + + /* Tell mac80211 our characteristics */ + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SPECTRUM_MGMT | + IEEE80211_HW_REPORTS_TX_ACK_STATUS | + IEEE80211_HW_QUEUE_CONTROL | + IEEE80211_HW_WANT_MONITOR_VIF | + IEEE80211_HW_SCAN_WHILE_IDLE | + IEEE80211_HW_NEED_DTIM_PERIOD | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS | + IEEE80211_HW_AMPDU_AGGREGATION; + + hw->queues = IWL_FIRST_AMPDU_QUEUE; + hw->offchannel_tx_hw_queue = IWL_OFFCHANNEL_QUEUE; + hw->rate_control_algorithm = "iwl-mvm-rs"; + + /* + * Enable 11w if advertised by firmware and software crypto + * is not enabled (as the firmware will interpret some mgmt + * packets, so enabling it with software crypto isn't safe) + */ + if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_MFP && + !iwlwifi_mod_params.sw_crypto) + hw->flags |= IEEE80211_HW_MFP_CAPABLE; + + hw->sta_data_size = sizeof(struct iwl_mvm_sta); + hw->vif_data_size = sizeof(struct iwl_mvm_vif); + hw->chanctx_data_size = sizeof(struct iwl_mvm_phy_ctxt); + + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_DEVICE); + + hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | + WIPHY_FLAG_DISABLE_BEACON_HINTS | + WIPHY_FLAG_IBSS_RSN; + + hw->wiphy->iface_combinations = iwl_mvm_iface_combinations; + hw->wiphy->n_iface_combinations = + ARRAY_SIZE(iwl_mvm_iface_combinations); + + hw->wiphy->max_remain_on_channel_duration = 500; + hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; + + /* Extract MAC address */ + memcpy(mvm->addresses[0].addr, mvm->nvm_data->hw_addr, ETH_ALEN); + hw->wiphy->addresses = mvm->addresses; + hw->wiphy->n_addresses = 1; + num_mac = mvm->nvm_data->n_hw_addrs; + if (num_mac > 1) { + memcpy(mvm->addresses[1].addr, mvm->addresses[0].addr, + ETH_ALEN); + mvm->addresses[1].addr[5]++; + hw->wiphy->n_addresses++; + } + + /* we create the 802.11 header and a max-length SSID element */ + hw->wiphy->max_scan_ie_len = + mvm->fw->ucode_capa.max_probe_length - 24 - 34; + hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; + + if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels) + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &mvm->nvm_data->bands[IEEE80211_BAND_2GHZ]; + if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &mvm->nvm_data->bands[IEEE80211_BAND_5GHZ]; + + hw->wiphy->hw_version = mvm->trans->hw_id; + + if (iwlwifi_mod_params.power_save) + hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; + else + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN | + NL80211_FEATURE_P2P_GO_OPPPS; + + mvm->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; + +#ifdef CONFIG_PM_SLEEP + if (mvm->fw->img[IWL_UCODE_WOWLAN].sec[0].len && + mvm->trans->ops->d3_suspend && + mvm->trans->ops->d3_resume && + device_can_wakeup(mvm->trans->dev)) { + hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | + WIPHY_WOWLAN_DISCONNECT | + WIPHY_WOWLAN_EAP_IDENTITY_REQ | + WIPHY_WOWLAN_RFKILL_RELEASE; + if (!iwlwifi_mod_params.sw_crypto) + hw->wiphy->wowlan.flags |= + WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | + WIPHY_WOWLAN_GTK_REKEY_FAILURE | + WIPHY_WOWLAN_4WAY_HANDSHAKE; + + hw->wiphy->wowlan.n_patterns = IWL_WOWLAN_MAX_PATTERNS; + hw->wiphy->wowlan.pattern_min_len = IWL_WOWLAN_MIN_PATTERN_LEN; + hw->wiphy->wowlan.pattern_max_len = IWL_WOWLAN_MAX_PATTERN_LEN; + } +#endif + + ret = iwl_mvm_leds_init(mvm); + if (ret) + return ret; + + return ieee80211_register_hw(mvm->hw); +} + +static void iwl_mvm_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + if (test_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status)) { + IWL_DEBUG_DROP(mvm, "Dropping - RF KILL\n"); + goto drop; + } + + if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_OFFCHANNEL_QUEUE && + !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status)) + goto drop; + + if (control->sta) { + if (iwl_mvm_tx_skb(mvm, skb, control->sta)) + goto drop; + return; + } + + if (iwl_mvm_tx_skb_non_sta(mvm, skb)) + goto drop; + return; + drop: + ieee80211_free_txskb(hw, skb); +} + +static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, + u16 *ssn, u8 buf_size) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + int ret; + + IWL_DEBUG_HT(mvm, "A-MPDU action on addr %pM tid %d: action %d\n", + sta->addr, tid, action); + + if (!(mvm->nvm_data->sku_cap_11n_enable)) + return -EACCES; + + mutex_lock(&mvm->mutex); + + switch (action) { + case IEEE80211_AMPDU_RX_START: + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) { + ret = -EINVAL; + break; + } + ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, *ssn, true); + break; + case IEEE80211_AMPDU_RX_STOP: + ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false); + break; + case IEEE80211_AMPDU_TX_START: + ret = iwl_mvm_sta_tx_agg_start(mvm, vif, sta, tid, ssn); + break; + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + ret = iwl_mvm_sta_tx_agg_stop(mvm, vif, sta, tid); + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + ret = iwl_mvm_sta_tx_agg_oper(mvm, vif, sta, tid, buf_size); + break; + default: + WARN_ON_ONCE(1); + ret = -EINVAL; + break; + } + mutex_unlock(&mvm->mutex); + + return ret; +} + +static void iwl_mvm_cleanup_iterator(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + mvmvif->uploaded = false; + mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT; + + /* does this make sense at all? */ + mvmvif->color++; + + spin_lock_bh(&mvm->time_event_lock); + iwl_mvm_te_clear_data(mvm, &mvmvif->time_event_data); + spin_unlock_bh(&mvm->time_event_lock); + + if (vif->type != NL80211_IFTYPE_P2P_DEVICE) + mvmvif->phy_ctxt = NULL; +} + +static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) +{ + iwl_trans_stop_device(mvm->trans); + iwl_trans_stop_hw(mvm->trans, false); + + mvm->scan_status = IWL_MVM_SCAN_NONE; + + /* just in case one was running */ + ieee80211_remain_on_channel_expired(mvm->hw); + + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + iwl_mvm_cleanup_iterator, mvm); + + memset(mvm->fw_key_table, 0, sizeof(mvm->fw_key_table)); + memset(mvm->sta_drained, 0, sizeof(mvm->sta_drained)); + + ieee80211_wake_queues(mvm->hw); + + mvm->vif_count = 0; +} + +static int iwl_mvm_mac_start(struct ieee80211_hw *hw) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + int ret; + + mutex_lock(&mvm->mutex); + + /* Clean up some internal and mac80211 state on restart */ + if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) + iwl_mvm_restart_cleanup(mvm); + + ret = iwl_mvm_up(mvm); + mutex_unlock(&mvm->mutex); + + return ret; +} + +static void iwl_mvm_mac_restart_complete(struct ieee80211_hw *hw) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + int ret; + + mutex_lock(&mvm->mutex); + + clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + ret = iwl_mvm_update_quotas(mvm, NULL); + if (ret) + IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n", + ret); + + mutex_unlock(&mvm->mutex); +} + +static void iwl_mvm_mac_stop(struct ieee80211_hw *hw) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + flush_work(&mvm->async_handlers_wk); + + mutex_lock(&mvm->mutex); + /* async_handlers_wk is now blocked */ + + /* + * The work item could be running or queued if the + * ROC time event stops just as we get here. + */ + cancel_work_sync(&mvm->roc_done_wk); + + iwl_trans_stop_device(mvm->trans); + iwl_trans_stop_hw(mvm->trans, false); + + iwl_mvm_async_handlers_purge(mvm); + /* async_handlers_list is empty and will stay empty: HW is stopped */ + + /* the fw is stopped, the aux sta is dead: clean up driver state */ + iwl_mvm_dealloc_int_sta(mvm, &mvm->aux_sta); + + mutex_unlock(&mvm->mutex); + + /* + * The worker might have been waiting for the mutex, let it run and + * discover that its list is now empty. + */ + cancel_work_sync(&mvm->async_handlers_wk); +} + +static void iwl_mvm_pm_disable_iterator(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = data; + int ret; + + ret = iwl_mvm_power_disable(mvm, vif); + if (ret) + IWL_ERR(mvm, "failed to disable power management\n"); +} + +static void iwl_mvm_power_update_iterator(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = data; + + iwl_mvm_power_update_mode(mvm, vif); +} + +static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; + + /* + * Not much to do here. The stack will not allow interface + * types or combinations that we didn't advertise, so we + * don't really have to check the types. + */ + + mutex_lock(&mvm->mutex); + + /* Allocate resources for the MAC context, and add it the the fw */ + ret = iwl_mvm_mac_ctxt_init(mvm, vif); + if (ret) + goto out_unlock; + + /* + * The AP binding flow can be done only after the beacon + * template is configured (which happens only in the mac80211 + * start_ap() flow), and adding the broadcast station can happen + * only after the binding. + * In addition, since modifying the MAC before adding a bcast + * station is not allowed by the FW, delay the adding of MAC context to + * the point where we can also add the bcast station. + * In short: there's not much we can do at this point, other than + * allocating resources :) + */ + if (vif->type == NL80211_IFTYPE_AP) { + u32 qmask = iwl_mvm_mac_get_queues_mask(mvm, vif); + ret = iwl_mvm_allocate_int_sta(mvm, &mvmvif->bcast_sta, + qmask); + if (ret) { + IWL_ERR(mvm, "Failed to allocate bcast sta\n"); + goto out_release; + } + + goto out_unlock; + } + + /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * Iterate and disable PM on all active interfaces. + * Note: the method below does not count the new interface being added + * at this moment. + */ + mvm->vif_count++; + if (mvm->vif_count > 1) { + IWL_DEBUG_MAC80211(mvm, + "Disable power on existing interfaces\n"); + ieee80211_iterate_active_interfaces( + mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_pm_disable_iterator, mvm); + } + + ret = iwl_mvm_mac_ctxt_add(mvm, vif); + if (ret) + goto out_release; + + /* + * Update power state on the new interface. Admittedly, based on + * mac80211 logics this power update will disable power management + */ + iwl_mvm_power_update_mode(mvm, vif); + + /* + * P2P_DEVICE interface does not have a channel context assigned to it, + * so a dedicated PHY context is allocated to it and the corresponding + * MAC context is bound to it at this stage. + */ + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) { + struct ieee80211_channel *chan; + struct cfg80211_chan_def chandef; + + mvmvif->phy_ctxt = &mvm->phy_ctxt_roc; + + /* + * The channel used here isn't relevant as it's + * going to be overwritten as part of the ROC flow. + * For now use the first channel we have. + */ + chan = &mvm->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels[0]; + cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT); + ret = iwl_mvm_phy_ctxt_add(mvm, mvmvif->phy_ctxt, + &chandef, 1, 1); + if (ret) + goto out_remove_mac; + + ret = iwl_mvm_binding_add_vif(mvm, vif); + if (ret) + goto out_remove_phy; + + ret = iwl_mvm_add_bcast_sta(mvm, vif, &mvmvif->bcast_sta); + if (ret) + goto out_unbind; + + /* Save a pointer to p2p device vif, so it can later be used to + * update the p2p device MAC when a GO is started/stopped */ + mvm->p2p_device_vif = vif; + } + + goto out_unlock; + + out_unbind: + iwl_mvm_binding_remove_vif(mvm, vif); + out_remove_phy: + iwl_mvm_phy_ctxt_remove(mvm, mvmvif->phy_ctxt); + out_remove_mac: + mvmvif->phy_ctxt = NULL; + iwl_mvm_mac_ctxt_remove(mvm, vif); + out_release: + /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * Check if only one additional interface remains after rereasing + * current one. Update power mode on the remaining interface. + */ + mvm->vif_count--; + IWL_DEBUG_MAC80211(mvm, "Currently %d interfaces active\n", + mvm->vif_count); + if (mvm->vif_count == 1) { + ieee80211_iterate_active_interfaces( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_power_update_iterator, mvm); + } + iwl_mvm_mac_ctxt_release(mvm, vif); + out_unlock: + mutex_unlock(&mvm->mutex); + + return ret; +} + +static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + u32 tfd_msk = 0, ac; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + if (vif->hw_queue[ac] != IEEE80211_INVAL_HW_QUEUE) + tfd_msk |= BIT(vif->hw_queue[ac]); + + if (vif->cab_queue != IEEE80211_INVAL_HW_QUEUE) + tfd_msk |= BIT(vif->cab_queue); + + if (tfd_msk) { + mutex_lock(&mvm->mutex); + iwl_mvm_flush_tx_path(mvm, tfd_msk, true); + mutex_unlock(&mvm->mutex); + } + + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) { + /* + * Flush the ROC worker which will flush the OFFCHANNEL queue. + * We assume here that all the packets sent to the OFFCHANNEL + * queue are sent in ROC session. + */ + flush_work(&mvm->roc_done_wk); + } else { + /* + * By now, all the AC queues are empty. The AGG queues are + * empty too. We already got all the Tx responses for all the + * packets in the queues. The drain work can have been + * triggered. Flush it. This work item takes the mutex, so kill + * it before we take it. + */ + flush_work(&mvm->sta_drained_wk); + } + + mutex_lock(&mvm->mutex); + + /* + * For AP/GO interface, the tear down of the resources allocated to the + * interface should be handled as part of the bss_info_changed flow. + */ + if (vif->type == NL80211_IFTYPE_AP) { + iwl_mvm_dealloc_int_sta(mvm, &mvmvif->bcast_sta); + goto out_release; + } + + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) { + mvm->p2p_device_vif = NULL; + iwl_mvm_rm_bcast_sta(mvm, &mvmvif->bcast_sta); + iwl_mvm_binding_remove_vif(mvm, vif); + iwl_mvm_phy_ctxt_remove(mvm, mvmvif->phy_ctxt); + mvmvif->phy_ctxt = NULL; + } + + /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * Check if only one additional interface remains after removing + * current one. Update power mode on the remaining interface. + */ + if (mvm->vif_count) + mvm->vif_count--; + IWL_DEBUG_MAC80211(mvm, "Currently %d interfaces active\n", + mvm->vif_count); + if (mvm->vif_count == 1) { + ieee80211_iterate_active_interfaces( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_power_update_iterator, mvm); + } + + iwl_mvm_mac_ctxt_remove(mvm, vif); + +out_release: + iwl_mvm_mac_ctxt_release(mvm, vif); + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_mac_config(struct ieee80211_hw *hw, u32 changed) +{ + return 0; +} + +static void iwl_mvm_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + *total_flags = 0; +} + +static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; + + ret = iwl_mvm_mac_ctxt_changed(mvm, vif); + if (ret) + IWL_ERR(mvm, "failed to update MAC %pM\n", vif->addr); + + if (changes & BSS_CHANGED_ASSOC) { + if (bss_conf->assoc) { + /* add quota for this interface */ + ret = iwl_mvm_update_quotas(mvm, vif); + if (ret) { + IWL_ERR(mvm, "failed to update quotas\n"); + return; + } + iwl_mvm_remove_time_event(mvm, mvmvif, + &mvmvif->time_event_data); + } else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { + /* remove AP station now that the MAC is unassoc */ + ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id); + if (ret) + IWL_ERR(mvm, "failed to remove AP station\n"); + mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT; + /* remove quota for this interface */ + ret = iwl_mvm_update_quotas(mvm, NULL); + if (ret) + IWL_ERR(mvm, "failed to update quotas\n"); + } + } else if (changes & BSS_CHANGED_PS) { + /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single + * MAC. Avoid power mode update if more than one interface + * is active. + */ + IWL_DEBUG_MAC80211(mvm, "Currently %d interfaces active\n", + mvm->vif_count); + if (mvm->vif_count == 1) { + ret = iwl_mvm_power_update_mode(mvm, vif); + if (ret) + IWL_ERR(mvm, "failed to update power mode\n"); + } + } +} + +static int iwl_mvm_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; + + mutex_lock(&mvm->mutex); + + /* Send the beacon template */ + ret = iwl_mvm_mac_ctxt_beacon_changed(mvm, vif); + if (ret) + goto out_unlock; + + /* Add the mac context */ + ret = iwl_mvm_mac_ctxt_add(mvm, vif); + if (ret) + goto out_unlock; + + /* Perform the binding */ + ret = iwl_mvm_binding_add_vif(mvm, vif); + if (ret) + goto out_remove; + + mvmvif->ap_active = true; + + /* Send the bcast station. At this stage the TBTT and DTIM time events + * are added and applied to the scheduler */ + ret = iwl_mvm_send_bcast_sta(mvm, vif, &mvmvif->bcast_sta); + if (ret) + goto out_unbind; + + ret = iwl_mvm_update_quotas(mvm, vif); + if (ret) + goto out_rm_bcast; + + /* Need to update the P2P Device MAC */ + if (vif->p2p && mvm->p2p_device_vif) + iwl_mvm_mac_ctxt_changed(mvm, mvm->p2p_device_vif); + + mutex_unlock(&mvm->mutex); + return 0; + +out_rm_bcast: + iwl_mvm_send_rm_bcast_sta(mvm, &mvmvif->bcast_sta); +out_unbind: + iwl_mvm_binding_remove_vif(mvm, vif); +out_remove: + iwl_mvm_mac_ctxt_remove(mvm, vif); +out_unlock: + mutex_unlock(&mvm->mutex); + return ret; +} + +static void iwl_mvm_stop_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + mutex_lock(&mvm->mutex); + + mvmvif->ap_active = false; + + /* Need to update the P2P Device MAC */ + if (vif->p2p && mvm->p2p_device_vif) + iwl_mvm_mac_ctxt_changed(mvm, mvm->p2p_device_vif); + + iwl_mvm_update_quotas(mvm, NULL); + iwl_mvm_send_rm_bcast_sta(mvm, &mvmvif->bcast_sta); + iwl_mvm_binding_remove_vif(mvm, vif); + iwl_mvm_mac_ctxt_remove(mvm, vif); + + mutex_unlock(&mvm->mutex); +} + +static void iwl_mvm_bss_info_changed_ap(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + /* Need to send a new beacon template to the FW */ + if (changes & BSS_CHANGED_BEACON) { + if (iwl_mvm_mac_ctxt_beacon_changed(mvm, vif)) + IWL_WARN(mvm, "Failed updating beacon data\n"); + } +} + +static void iwl_mvm_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + mutex_lock(&mvm->mutex); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + iwl_mvm_bss_info_changed_station(mvm, vif, bss_conf, changes); + break; + case NL80211_IFTYPE_AP: + iwl_mvm_bss_info_changed_ap(mvm, vif, bss_conf, changes); + break; + default: + /* shouldn't happen */ + WARN_ON_ONCE(1); + } + + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_mac_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + int ret; + + if (req->n_channels == 0 || req->n_channels > MAX_NUM_SCAN_CHANNELS) + return -EINVAL; + + mutex_lock(&mvm->mutex); + + if (mvm->scan_status == IWL_MVM_SCAN_NONE) + ret = iwl_mvm_scan_request(mvm, vif, req); + else + ret = -EBUSY; + + mutex_unlock(&mvm->mutex); + + return ret; +} + +static void iwl_mvm_mac_cancel_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + mutex_lock(&mvm->mutex); + + iwl_mvm_cancel_scan(mvm); + + mutex_unlock(&mvm->mutex); +} + +static void +iwl_mvm_mac_allow_buffered_frames(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u16 tid, + int num_frames, + enum ieee80211_frame_release_type reason, + bool more_data) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + + /* TODO: how do we tell the fw to send frames for a specific TID */ + + /* + * The fw will send EOSP notification when the last frame will be + * transmitted. + */ + iwl_mvm_sta_modify_sleep_tx_count(mvm, mvmsta->sta_id, reason, + num_frames); +} + +static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + struct ieee80211_sta *sta) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + + switch (cmd) { + case STA_NOTIFY_SLEEP: + if (atomic_read(&mvmsta->pending_frames) > 0) + ieee80211_sta_block_awake(hw, sta, true); + /* + * The fw updates the STA to be asleep. Tx packets on the Tx + * queues to this station will not be transmitted. The fw will + * send a Tx response with TX_STATUS_FAIL_DEST_PS. + */ + break; + case STA_NOTIFY_AWAKE: + if (WARN_ON(mvmsta->sta_id == IWL_INVALID_STATION)) + break; + iwl_mvm_sta_modify_ps_wake(mvm, mvmsta->sta_id); + break; + default: + break; + } +} + +static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + enum ieee80211_sta_state old_state, + enum ieee80211_sta_state new_state) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; + + IWL_DEBUG_MAC80211(mvm, "station %pM state change %d->%d\n", + sta->addr, old_state, new_state); + + /* this would be a mac80211 bug ... but don't crash */ + if (WARN_ON_ONCE(!mvmvif->phy_ctxt)) + return -EINVAL; + + /* if a STA is being removed, reuse its ID */ + flush_work(&mvm->sta_drained_wk); + + mutex_lock(&mvm->mutex); + if (old_state == IEEE80211_STA_NOTEXIST && + new_state == IEEE80211_STA_NONE) { + ret = iwl_mvm_add_sta(mvm, vif, sta); + } else if (old_state == IEEE80211_STA_NONE && + new_state == IEEE80211_STA_AUTH) { + ret = 0; + } else if (old_state == IEEE80211_STA_AUTH && + new_state == IEEE80211_STA_ASSOC) { + iwl_mvm_rs_rate_init(mvm, sta, mvmvif->phy_ctxt->channel->band); + ret = 0; + } else if (old_state == IEEE80211_STA_ASSOC && + new_state == IEEE80211_STA_AUTHORIZED) { + ret = 0; + } else if (old_state == IEEE80211_STA_AUTHORIZED && + new_state == IEEE80211_STA_ASSOC) { + ret = 0; + } else if (old_state == IEEE80211_STA_ASSOC && + new_state == IEEE80211_STA_AUTH) { + ret = 0; + } else if (old_state == IEEE80211_STA_AUTH && + new_state == IEEE80211_STA_NONE) { + ret = 0; + } else if (old_state == IEEE80211_STA_NONE && + new_state == IEEE80211_STA_NOTEXIST) { + ret = iwl_mvm_rm_sta(mvm, vif, sta); + } else { + ret = -EIO; + } + mutex_unlock(&mvm->mutex); + + return ret; +} + +static int iwl_mvm_mac_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + mvm->rts_threshold = value; + + return 0; +} + +static int iwl_mvm_mac_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 ac, + const struct ieee80211_tx_queue_params *params) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + mvmvif->queue_params[ac] = *params; + + /* + * No need to update right away, we'll get BSS_CHANGED_QOS + * The exception is P2P_DEVICE interface which needs immediate update. + */ + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) { + int ret; + + mutex_lock(&mvm->mutex); + ret = iwl_mvm_mac_ctxt_changed(mvm, vif); + mutex_unlock(&mvm->mutex); + return ret; + } + return 0; +} + +static void iwl_mvm_mac_mgd_prepare_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + u32 duration = min(IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS, + 200 + vif->bss_conf.beacon_int); + u32 min_duration = min(IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS, + 100 + vif->bss_conf.beacon_int); + + if (WARN_ON_ONCE(vif->bss_conf.assoc)) + return; + + mutex_lock(&mvm->mutex); + /* Try really hard to protect the session and hear a beacon */ + iwl_mvm_protect_session(mvm, vif, duration, min_duration); + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + int ret; + + if (iwlwifi_mod_params.sw_crypto) { + IWL_DEBUG_MAC80211(mvm, "leave - hwcrypto disabled\n"); + return -EOPNOTSUPP; + } + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + /* fall-through */ + case WLAN_CIPHER_SUITE_CCMP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + break; + case WLAN_CIPHER_SUITE_AES_CMAC: + WARN_ON_ONCE(!(hw->flags & IEEE80211_HW_MFP_CAPABLE)); + break; + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + /* + * Support for TX only, at least for now, so accept + * the key and do nothing else. Then mac80211 will + * pass it for TX but we don't have to use it for RX. + */ + return 0; + default: + return -EOPNOTSUPP; + } + + mutex_lock(&mvm->mutex); + + switch (cmd) { + case SET_KEY: + IWL_DEBUG_MAC80211(mvm, "set hwcrypto key\n"); + ret = iwl_mvm_set_sta_key(mvm, vif, sta, key, false); + if (ret) { + IWL_WARN(mvm, "set key failed\n"); + /* + * can't add key for RX, but we don't need it + * in the device for TX so still return 0 + */ + ret = 0; + } + + break; + case DISABLE_KEY: + IWL_DEBUG_MAC80211(mvm, "disable hwcrypto key\n"); + ret = iwl_mvm_remove_sta_key(mvm, vif, sta, key); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&mvm->mutex); + return ret; +} + +static void iwl_mvm_mac_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, + u32 iv32, u16 *phase1key) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + iwl_mvm_update_tkip_key(mvm, vif, keyconf, sta, iv32, phase1key); +} + + +static int iwl_mvm_roc(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_channel *channel, + int duration) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct cfg80211_chan_def chandef; + int ret; + + if (vif->type != NL80211_IFTYPE_P2P_DEVICE) { + IWL_ERR(mvm, "vif isn't a P2P_DEVICE: %d\n", vif->type); + return -EINVAL; + } + + IWL_DEBUG_MAC80211(mvm, "enter (%d, %d)\n", channel->hw_value, + duration); + + mutex_lock(&mvm->mutex); + + cfg80211_chandef_create(&chandef, channel, NL80211_CHAN_NO_HT); + ret = iwl_mvm_phy_ctxt_changed(mvm, &mvm->phy_ctxt_roc, + &chandef, 1, 1); + + /* Schedule the time events */ + ret = iwl_mvm_start_p2p_roc(mvm, vif, duration); + + mutex_unlock(&mvm->mutex); + IWL_DEBUG_MAC80211(mvm, "leave\n"); + + return ret; +} + +static int iwl_mvm_cancel_roc(struct ieee80211_hw *hw) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + + IWL_DEBUG_MAC80211(mvm, "enter\n"); + + mutex_lock(&mvm->mutex); + iwl_mvm_stop_p2p_roc(mvm); + mutex_unlock(&mvm->mutex); + + IWL_DEBUG_MAC80211(mvm, "leave\n"); + return 0; +} + +static int iwl_mvm_add_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv; + int ret; + + mutex_lock(&mvm->mutex); + + IWL_DEBUG_MAC80211(mvm, "Add PHY context\n"); + ret = iwl_mvm_phy_ctxt_add(mvm, phy_ctxt, &ctx->def, + ctx->rx_chains_static, + ctx->rx_chains_dynamic); + mutex_unlock(&mvm->mutex); + return ret; +} + +static void iwl_mvm_remove_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv; + + mutex_lock(&mvm->mutex); + iwl_mvm_phy_ctxt_remove(mvm, phy_ctxt); + mutex_unlock(&mvm->mutex); +} + +static void iwl_mvm_change_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + u32 changed) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv; + + mutex_lock(&mvm->mutex); + iwl_mvm_phy_ctxt_changed(mvm, phy_ctxt, &ctx->def, + ctx->rx_chains_static, + ctx->rx_chains_dynamic); + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_phy_ctxt *phyctx = (void *)ctx->drv_priv; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; + + mutex_lock(&mvm->mutex); + + mvmvif->phy_ctxt = phyctx; + + switch (vif->type) { + case NL80211_IFTYPE_AP: + /* + * The AP binding flow is handled as part of the start_ap flow + * (in bss_info_changed). + */ + ret = 0; + goto out_unlock; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MONITOR: + break; + default: + ret = -EINVAL; + goto out_unlock; + } + + ret = iwl_mvm_binding_add_vif(mvm, vif); + if (ret) + goto out_unlock; + + /* + * Setting the quota at this stage is only required for monitor + * interfaces. For the other types, the bss_info changed flow + * will handle quota settings. + */ + if (vif->type == NL80211_IFTYPE_MONITOR) { + ret = iwl_mvm_update_quotas(mvm, vif); + if (ret) + goto out_remove_binding; + } + + goto out_unlock; + + out_remove_binding: + iwl_mvm_binding_remove_vif(mvm, vif); + out_unlock: + mutex_unlock(&mvm->mutex); + if (ret) + mvmvif->phy_ctxt = NULL; + return ret; +} + +static void iwl_mvm_unassign_vif_chanctx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + mutex_lock(&mvm->mutex); + + iwl_mvm_remove_time_event(mvm, mvmvif, &mvmvif->time_event_data); + + if (vif->type == NL80211_IFTYPE_AP) + goto out_unlock; + + iwl_mvm_binding_remove_vif(mvm, vif); + switch (vif->type) { + case NL80211_IFTYPE_MONITOR: + iwl_mvm_update_quotas(mvm, vif); + break; + default: + break; + } + +out_unlock: + mvmvif->phy_ctxt = NULL; + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_set_tim(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + bool set) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + + if (!mvm_sta || !mvm_sta->vif) { + IWL_ERR(mvm, "Station is not associated to a vif\n"); + return -EINVAL; + } + + return iwl_mvm_mac_ctxt_beacon_changed(mvm, mvm_sta->vif); +} + +struct ieee80211_ops iwl_mvm_hw_ops = { + .tx = iwl_mvm_mac_tx, + .ampdu_action = iwl_mvm_mac_ampdu_action, + .start = iwl_mvm_mac_start, + .restart_complete = iwl_mvm_mac_restart_complete, + .stop = iwl_mvm_mac_stop, + .add_interface = iwl_mvm_mac_add_interface, + .remove_interface = iwl_mvm_mac_remove_interface, + .config = iwl_mvm_mac_config, + .configure_filter = iwl_mvm_configure_filter, + .bss_info_changed = iwl_mvm_bss_info_changed, + .hw_scan = iwl_mvm_mac_hw_scan, + .cancel_hw_scan = iwl_mvm_mac_cancel_hw_scan, + .sta_state = iwl_mvm_mac_sta_state, + .sta_notify = iwl_mvm_mac_sta_notify, + .allow_buffered_frames = iwl_mvm_mac_allow_buffered_frames, + .set_rts_threshold = iwl_mvm_mac_set_rts_threshold, + .conf_tx = iwl_mvm_mac_conf_tx, + .mgd_prepare_tx = iwl_mvm_mac_mgd_prepare_tx, + .set_key = iwl_mvm_mac_set_key, + .update_tkip_key = iwl_mvm_mac_update_tkip_key, + .remain_on_channel = iwl_mvm_roc, + .cancel_remain_on_channel = iwl_mvm_cancel_roc, + + .add_chanctx = iwl_mvm_add_chanctx, + .remove_chanctx = iwl_mvm_remove_chanctx, + .change_chanctx = iwl_mvm_change_chanctx, + .assign_vif_chanctx = iwl_mvm_assign_vif_chanctx, + .unassign_vif_chanctx = iwl_mvm_unassign_vif_chanctx, + + .start_ap = iwl_mvm_start_ap, + .stop_ap = iwl_mvm_stop_ap, + + .set_tim = iwl_mvm_set_tim, + +#ifdef CONFIG_PM_SLEEP + /* look at d3.c */ + .suspend = iwl_mvm_suspend, + .resume = iwl_mvm_resume, + .set_wakeup = iwl_mvm_set_wakeup, + .set_rekey_data = iwl_mvm_set_rekey_data, +#if IS_ENABLED(CONFIG_IPV6) + .ipv6_addr_change = iwl_mvm_ipv6_addr_change, +#endif + .set_default_unicast_key = iwl_mvm_set_default_unicast_key, +#endif +}; diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h new file mode 100644 index 0000000..4e339cc --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -0,0 +1,500 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __IWL_MVM_H__ +#define __IWL_MVM_H__ + +#include +#include +#include +#include + +#include "iwl-op-mode.h" +#include "iwl-trans.h" +#include "iwl-notif-wait.h" +#include "iwl-eeprom-parse.h" +#include "iwl-test.h" +#include "iwl-trans.h" +#include "sta.h" +#include "fw-api.h" + +#define IWL_INVALID_MAC80211_QUEUE 0xff +#define IWL_MVM_MAX_ADDRESSES 2 +#define IWL_RSSI_OFFSET 44 + +enum iwl_mvm_tx_fifo { + IWL_MVM_TX_FIFO_BK = 0, + IWL_MVM_TX_FIFO_BE, + IWL_MVM_TX_FIFO_VI, + IWL_MVM_TX_FIFO_VO, +}; + +/* Placeholder */ +#define IWL_OFFCHANNEL_QUEUE 8 +#define IWL_FIRST_AMPDU_QUEUE 11 + +extern struct ieee80211_ops iwl_mvm_hw_ops; +/** + * struct iwl_mvm_mod_params - module parameters for iwlmvm + * @init_dbg: if true, then the NIC won't be stopped if the INIT fw asserted. + * We will register to mac80211 to have testmode working. The NIC must not + * be up'ed after the INIT fw asserted. This is useful to be able to use + * proprietary tools over testmode to debug the INIT fw. + * @power_scheme: CAM(Continuous Active Mode)-1, BPS(Balanced Power + * Save)-2(default), LP(Low Power)-3 + */ +struct iwl_mvm_mod_params { + bool init_dbg; + int power_scheme; +}; +extern struct iwl_mvm_mod_params iwlmvm_mod_params; + +struct iwl_mvm_phy_ctxt { + u16 id; + u16 color; + + /* + * TODO: This should probably be removed. Currently here only for rate + * scaling algorithm + */ + struct ieee80211_channel *channel; +}; + +struct iwl_mvm_time_event_data { + struct ieee80211_vif *vif; + struct list_head list; + unsigned long end_jiffies; + u32 duration; + bool running; + u32 uid; + + /* + * The access to the 'id' field must be done when the + * mvm->time_event_lock is held, as it value is used to indicate + * if the te is in the time event list or not (when id == TE_MAX) + */ + u32 id; +}; + + /* Power management */ + +/** + * enum iwl_power_scheme + * @IWL_POWER_LEVEL_CAM - Continuously Active Mode + * @IWL_POWER_LEVEL_BPS - Balanced Power Save (default) + * @IWL_POWER_LEVEL_LP - Low Power + */ +enum iwl_power_scheme { + IWL_POWER_SCHEME_CAM = 1, + IWL_POWER_SCHEME_BPS, + IWL_POWER_SCHEME_LP +}; + +#define IWL_CONN_MAX_LISTEN_INTERVAL 70 + +/** + * struct iwl_mvm_vif - data per Virtual Interface, it is a MAC context + * @id: between 0 and 3 + * @color: to solve races upon MAC addition and removal + * @ap_sta_id: the sta_id of the AP - valid only if VIF type is STA + * @uploaded: indicates the MAC context has been added to the device + * @ap_active: indicates that ap context is configured, and that the interface + * should get quota etc. + * @queue_params: QoS params for this MAC + * @bcast_sta: station used for broadcast packets. Used by the following + * vifs: P2P_DEVICE, GO and AP. + * @beacon_skb: the skb used to hold the AP/GO beacon template + */ +struct iwl_mvm_vif { + u16 id; + u16 color; + u8 ap_sta_id; + + bool uploaded; + bool ap_active; + + enum iwl_tsf_id tsf_id; + + /* + * QoS data from mac80211, need to store this here + * as mac80211 has a separate callback but we need + * to have the data for the MAC context + */ + struct ieee80211_tx_queue_params queue_params[IEEE80211_NUM_ACS]; + struct iwl_mvm_time_event_data time_event_data; + + struct iwl_mvm_int_sta bcast_sta; + + /* + * Assigned while mac80211 has the interface in a channel context, + * or, for P2P Device, while it exists. + */ + struct iwl_mvm_phy_ctxt *phy_ctxt; + +#ifdef CONFIG_PM_SLEEP + /* WoWLAN GTK rekey data */ + struct { + u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN]; + __le64 replay_ctr; + bool valid; + } rekey_data; + + int tx_key_idx; + +#if IS_ENABLED(CONFIG_IPV6) + /* IPv6 addresses for WoWLAN */ + struct in6_addr target_ipv6_addrs[IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS]; + int num_target_ipv6_addrs; +#endif +#endif + +#ifdef CONFIG_IWLWIFI_DEBUGFS + struct dentry *dbgfs_dir; + void *dbgfs_data; +#endif +}; + +static inline struct iwl_mvm_vif * +iwl_mvm_vif_from_mac80211(struct ieee80211_vif *vif) +{ + return (void *)vif->drv_priv; +} + +enum iwl_mvm_status { + IWL_MVM_STATUS_HW_RFKILL, + IWL_MVM_STATUS_ROC_RUNNING, + IWL_MVM_STATUS_IN_HW_RESTART, +}; + +enum iwl_scan_status { + IWL_MVM_SCAN_NONE, + IWL_MVM_SCAN_OS, +}; + +/** + * struct iwl_nvm_section - describes an NVM section in memory. + * + * This struct holds an NVM section read from the NIC using NVM_ACCESS_CMD, + * and saved for later use by the driver. Not all NVM sections are saved + * this way, only the needed ones. + */ +struct iwl_nvm_section { + u16 length; + const u8 *data; +}; + +struct iwl_mvm { + /* for logger access */ + struct device *dev; + + struct iwl_trans *trans; + const struct iwl_fw *fw; + const struct iwl_cfg *cfg; + struct iwl_phy_db *phy_db; + struct ieee80211_hw *hw; + + /* for protecting access to iwl_mvm */ + struct mutex mutex; + struct list_head async_handlers_list; + spinlock_t async_handlers_lock; + struct work_struct async_handlers_wk; + + struct work_struct roc_done_wk; + + unsigned long status; + + enum iwl_ucode_type cur_ucode; + bool ucode_loaded; + bool init_ucode_run; + u32 error_event_table; + u32 log_event_table; + + u32 ampdu_ref; + + struct iwl_notif_wait_data notif_wait; + + unsigned long transport_queue_stop; + u8 queue_to_mac80211[IWL_MAX_HW_QUEUES]; + atomic_t queue_stop_count[IWL_MAX_HW_QUEUES]; + + struct iwl_nvm_data *nvm_data; + /* eeprom blob for debugfs/testmode */ + u8 *eeprom_blob; + size_t eeprom_blob_size; + /* NVM sections for 7000 family */ + struct iwl_nvm_section nvm_sections[NVM_NUM_OF_SECTIONS]; + + /* EEPROM MAC addresses */ + struct mac_address addresses[IWL_MVM_MAX_ADDRESSES]; + + /* data related to data path */ + struct iwl_rx_phy_info last_phy_info; + struct ieee80211_sta __rcu *fw_id_to_mac_id[IWL_MVM_STATION_COUNT]; + struct work_struct sta_drained_wk; + unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)]; + + /* configured by mac80211 */ + u32 rts_threshold; + + /* Scan status, cmd (pre-allocated) and auxiliary station */ + enum iwl_scan_status scan_status; + struct iwl_scan_cmd *scan_cmd; + + /* Internal station */ + struct iwl_mvm_int_sta aux_sta; + + u8 scan_last_antenna_idx; /* to toggle TX between antennas */ + u8 mgmt_last_antenna_idx; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + struct dentry *debugfs_dir; + u32 dbgfs_sram_offset, dbgfs_sram_len; + bool prevent_power_down_d3; +#endif + + struct iwl_mvm_phy_ctxt phy_ctxt_roc; + + struct list_head time_event_list; + spinlock_t time_event_lock; + + /* + * A bitmap indicating the index of the key in use. The firmware + * can hold 16 keys at most. Reflect this fact. + */ + unsigned long fw_key_table[BITS_TO_LONGS(STA_KEY_MAX_NUM)]; + u8 vif_count; + + struct led_classdev led; + + struct ieee80211_vif *p2p_device_vif; +}; + +/* Extract MVM priv from op_mode and _hw */ +#define IWL_OP_MODE_GET_MVM(_iwl_op_mode) \ + ((struct iwl_mvm *)(_iwl_op_mode)->op_mode_specific) + +#define IWL_MAC80211_GET_MVM(_hw) \ + IWL_OP_MODE_GET_MVM((struct iwl_op_mode *)((_hw)->priv)) + +extern const u8 iwl_mvm_ac_to_tx_fifo[]; + +struct iwl_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ +}; + +/****************** + * MVM Methods + ******************/ +/* uCode */ +int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm); + +/* Utils */ +int iwl_mvm_legacy_rate_to_mac80211_idx(u32 rate_n_flags, + enum ieee80211_band band); +u8 iwl_mvm_mac80211_idx_to_hwrate(int rate_idx); +void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm); +u8 first_antenna(u8 mask); +u8 iwl_mvm_next_antenna(struct iwl_mvm *mvm, u8 valid, u8 last_idx); + +/* Tx / Host Commands */ +int __must_check iwl_mvm_send_cmd(struct iwl_mvm *mvm, + struct iwl_host_cmd *cmd); +int __must_check iwl_mvm_send_cmd_pdu(struct iwl_mvm *mvm, u8 id, + u32 flags, u16 len, const void *data); +int __must_check iwl_mvm_send_cmd_status(struct iwl_mvm *mvm, + struct iwl_host_cmd *cmd, + u32 *status); +int __must_check iwl_mvm_send_cmd_pdu_status(struct iwl_mvm *mvm, u8 id, + u16 len, const void *data, + u32 *status); +int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb, + struct ieee80211_sta *sta); +int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb); +#ifdef CONFIG_IWLWIFI_DEBUG +const char *iwl_mvm_get_tx_fail_reason(u32 status); +#else +static inline const char *iwl_mvm_get_tx_fail_reason(u32 status) { return ""; } +#endif +int iwl_mvm_flush_tx_path(struct iwl_mvm *mvm, u32 tfd_msk, bool sync); +void iwl_mvm_async_handlers_purge(struct iwl_mvm *mvm); + +/* Statistics */ +int iwl_mvm_rx_reply_statistics(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_statistics(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + +/* NVM */ +int iwl_nvm_init(struct iwl_mvm *mvm); + +int iwl_mvm_up(struct iwl_mvm *mvm); +int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm); + +int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm); + +/* + * FW notifications / CMD responses handlers + * Convention: iwl_mvm_rx_ + */ +int iwl_mvm_rx_rx_phy_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_tx_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_fw_error(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + +/* MVM PHY */ +int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic); +int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic); +void iwl_mvm_phy_ctxt_remove(struct iwl_mvm *mvm, + struct iwl_mvm_phy_ctxt *ctxt); + +/* MAC (virtual interface) programming */ +int iwl_mvm_mac_ctxt_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +void iwl_mvm_mac_ctxt_release(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +int iwl_mvm_mac_ctxt_add(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +int iwl_mvm_mac_ctxt_changed(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +int iwl_mvm_mac_ctxt_remove(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +u32 iwl_mvm_mac_get_queues_mask(struct iwl_mvm *mvm, + struct ieee80211_vif *vif); +int iwl_mvm_mac_ctxt_beacon_changed(struct iwl_mvm *mvm, + struct ieee80211_vif *vif); + +/* Bindings */ +int iwl_mvm_binding_add_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +int iwl_mvm_binding_remove_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif); + +/* Quota management */ +int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif); + +/* Scanning */ +int iwl_mvm_scan_request(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req); +int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +void iwl_mvm_cancel_scan(struct iwl_mvm *mvm); + +/* MVM debugfs */ +#ifdef CONFIG_IWLWIFI_DEBUGFS +int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, struct dentry *dbgfs_dir); +int iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct dentry *dbgfs_dir); +void iwl_power_get_params(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_powertable_cmd *cmd); +#else +static inline int iwl_mvm_dbgfs_register(struct iwl_mvm *mvm, + struct dentry *dbgfs_dir) +{ + return 0; +} +#endif /* CONFIG_IWLWIFI_DEBUGFS */ + +/* rate scaling */ +int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, + u8 flags, bool init); + +/* power managment */ +int iwl_mvm_power_update_mode(struct iwl_mvm *mvm, struct ieee80211_vif *vif); +int iwl_mvm_power_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif); + +int iwl_mvm_leds_init(struct iwl_mvm *mvm); +void iwl_mvm_leds_exit(struct iwl_mvm *mvm); + +/* D3 (WoWLAN, NetDetect) */ +int iwl_mvm_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan); +int iwl_mvm_resume(struct ieee80211_hw *hw); +void iwl_mvm_set_wakeup(struct ieee80211_hw *hw, bool enabled); +void iwl_mvm_set_rekey_data(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_gtk_rekey_data *data); +void iwl_mvm_ipv6_addr_change(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct inet6_dev *idev); +void iwl_mvm_set_default_unicast_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, int idx); + +#endif /* __IWL_MVM_H__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c new file mode 100644 index 0000000..20016bc --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c @@ -0,0 +1,311 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include "iwl-trans.h" +#include "mvm.h" +#include "iwl-eeprom-parse.h" +#include "iwl-eeprom-read.h" +#include "iwl-nvm-parse.h" + +/* list of NVM sections we are allowed/need to read */ +static const int nvm_to_read[] = { + NVM_SECTION_TYPE_HW, + NVM_SECTION_TYPE_SW, + NVM_SECTION_TYPE_CALIBRATION, + NVM_SECTION_TYPE_PRODUCTION, +}; + +/* used to simplify the shared operations on NCM_ACCESS_CMD versions */ +union iwl_nvm_access_cmd { + struct iwl_nvm_access_cmd_ver1 ver1; + struct iwl_nvm_access_cmd_ver2 ver2; +}; +union iwl_nvm_access_resp { + struct iwl_nvm_access_resp_ver1 ver1; + struct iwl_nvm_access_resp_ver2 ver2; +}; + +static inline void iwl_nvm_fill_read_ver1(struct iwl_nvm_access_cmd_ver1 *cmd, + u16 offset, u16 length) +{ + cmd->offset = cpu_to_le16(offset); + cmd->length = cpu_to_le16(length); + cmd->cache_refresh = 1; +} + +static inline void iwl_nvm_fill_read_ver2(struct iwl_nvm_access_cmd_ver2 *cmd, + u16 offset, u16 length, u16 section) +{ + cmd->offset = cpu_to_le16(offset); + cmd->length = cpu_to_le16(length); + cmd->type = cpu_to_le16(section); +} + +static int iwl_nvm_read_chunk(struct iwl_mvm *mvm, u16 section, + u16 offset, u16 length, u8 *data) +{ + union iwl_nvm_access_cmd nvm_access_cmd; + union iwl_nvm_access_resp *nvm_resp; + struct iwl_rx_packet *pkt; + struct iwl_host_cmd cmd = { + .id = NVM_ACCESS_CMD, + .flags = CMD_SYNC | CMD_WANT_SKB, + .data = { &nvm_access_cmd, }, + }; + int ret, bytes_read, offset_read; + u8 *resp_data; + + memset(&nvm_access_cmd, 0, sizeof(nvm_access_cmd)); + + /* TODO: not sure family should be the decider, maybe FW version? */ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + iwl_nvm_fill_read_ver2(&(nvm_access_cmd.ver2), + offset, length, section); + cmd.len[0] = sizeof(struct iwl_nvm_access_cmd_ver2); + } else { + iwl_nvm_fill_read_ver1(&(nvm_access_cmd.ver1), + offset, length); + cmd.len[0] = sizeof(struct iwl_nvm_access_cmd_ver1); + } + + ret = iwl_mvm_send_cmd(mvm, &cmd); + if (ret) + return ret; + + pkt = cmd.resp_pkt; + if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERR(mvm, "Bad return from NVM_ACCES_COMMAND (0x%08X)\n", + pkt->hdr.flags); + ret = -EIO; + goto exit; + } + + /* Extract NVM response */ + nvm_resp = (void *)pkt->data; + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + ret = le16_to_cpu(nvm_resp->ver2.status); + bytes_read = le16_to_cpu(nvm_resp->ver2.length); + offset_read = le16_to_cpu(nvm_resp->ver2.offset); + resp_data = nvm_resp->ver2.data; + } else { + ret = le16_to_cpu(nvm_resp->ver1.length) <= 0; + bytes_read = le16_to_cpu(nvm_resp->ver1.length); + offset_read = le16_to_cpu(nvm_resp->ver1.offset); + resp_data = nvm_resp->ver1.data; + } + if (ret) { + IWL_ERR(mvm, + "NVM access command failed with status %d (device: %s)\n", + ret, mvm->cfg->name); + ret = -EINVAL; + goto exit; + } + + if (offset_read != offset) { + IWL_ERR(mvm, "NVM ACCESS response with invalid offset %d\n", + offset_read); + ret = -EINVAL; + goto exit; + } + + /* Write data to NVM */ + memcpy(data + offset, resp_data, bytes_read); + ret = bytes_read; + +exit: + iwl_free_resp(&cmd); + return ret; +} + +/* + * Reads an NVM section completely. + * NICs prior to 7000 family doesn't have a real NVM, but just read + * section 0 which is the EEPROM. Because the EEPROM reading is unlimited + * by uCode, we need to manually check in this case that we don't + * overflow and try to read more than the EEPROM size. + * For 7000 family NICs, we supply the maximal size we can read, and + * the uCode fills the response with as much data as we can, + * without overflowing, so no check is needed. + */ +static int iwl_nvm_read_section(struct iwl_mvm *mvm, u16 section, + u8 *data) +{ + u16 length, offset = 0; + int ret; + bool old_eeprom = mvm->cfg->device_family != IWL_DEVICE_FAMILY_7000; + + length = (iwlwifi_mod_params.amsdu_size_8K ? (8 * 1024) : (4 * 1024)) + - sizeof(union iwl_nvm_access_cmd) + - sizeof(struct iwl_rx_packet); + /* + * if length is greater than EEPROM size, truncate it because uCode + * doesn't check it by itself, and exit the loop when reached. + */ + if (old_eeprom && length > mvm->cfg->base_params->eeprom_size) + length = mvm->cfg->base_params->eeprom_size; + ret = length; + + /* Read the NVM until exhausted (reading less than requested) */ + while (ret == length) { + ret = iwl_nvm_read_chunk(mvm, section, offset, length, data); + if (ret < 0) { + IWL_ERR(mvm, + "Cannot read NVM from section %d offset %d, length %d\n", + section, offset, length); + return ret; + } + offset += ret; + if (old_eeprom && offset == mvm->cfg->base_params->eeprom_size) + break; + } + + IWL_INFO(mvm, "NVM section %d read completed\n", section); + return offset; +} + +static struct iwl_nvm_data * +iwl_parse_nvm_sections(struct iwl_mvm *mvm) +{ + struct iwl_nvm_section *sections = mvm->nvm_sections; + const __le16 *hw, *sw, *calib; + + /* Checking for required sections */ + if (!mvm->nvm_sections[NVM_SECTION_TYPE_SW].data || + !mvm->nvm_sections[NVM_SECTION_TYPE_HW].data) { + IWL_ERR(mvm, "Can't parse empty NVM sections\n"); + return NULL; + } + + if (WARN_ON(!mvm->cfg)) + return NULL; + + hw = (const __le16 *)sections[NVM_SECTION_TYPE_HW].data; + sw = (const __le16 *)sections[NVM_SECTION_TYPE_SW].data; + calib = (const __le16 *)sections[NVM_SECTION_TYPE_CALIBRATION].data; + return iwl_parse_nvm_data(mvm->trans->dev, mvm->cfg, hw, sw, calib); +} + +int iwl_nvm_init(struct iwl_mvm *mvm) +{ + int ret, i, section; + u8 *nvm_buffer, *temp; + + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + /* TODO: find correct NVM max size for a section */ + nvm_buffer = kmalloc(mvm->cfg->base_params->eeprom_size, + GFP_KERNEL); + if (!nvm_buffer) + return -ENOMEM; + for (i = 0; i < ARRAY_SIZE(nvm_to_read); i++) { + section = nvm_to_read[i]; + /* we override the constness for initial read */ + ret = iwl_nvm_read_section(mvm, section, nvm_buffer); + if (ret < 0) + break; + temp = kmemdup(nvm_buffer, ret, GFP_KERNEL); + if (!temp) { + ret = -ENOMEM; + break; + } + mvm->nvm_sections[section].data = temp; + mvm->nvm_sections[section].length = ret; + } + kfree(nvm_buffer); + if (ret < 0) + return ret; + } else { + /* allocate eeprom */ + mvm->eeprom_blob_size = mvm->cfg->base_params->eeprom_size; + IWL_DEBUG_EEPROM(mvm->trans->dev, "NVM size = %zd\n", + mvm->eeprom_blob_size); + mvm->eeprom_blob = kzalloc(mvm->eeprom_blob_size, GFP_KERNEL); + if (!mvm->eeprom_blob) + return -ENOMEM; + + ret = iwl_nvm_read_section(mvm, 0, mvm->eeprom_blob); + if (ret != mvm->eeprom_blob_size) { + IWL_ERR(mvm, "Read partial NVM %d/%zd\n", + ret, mvm->eeprom_blob_size); + kfree(mvm->eeprom_blob); + mvm->eeprom_blob = NULL; + return -EINVAL; + } + } + + ret = 0; + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) + mvm->nvm_data = iwl_parse_nvm_sections(mvm); + else + mvm->nvm_data = + iwl_parse_eeprom_data(mvm->trans->dev, + mvm->cfg, + mvm->eeprom_blob, + mvm->eeprom_blob_size); + + if (!mvm->nvm_data) { + kfree(mvm->eeprom_blob); + mvm->eeprom_blob = NULL; + ret = -ENOMEM; + } + + return ret; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c new file mode 100644 index 0000000..e675e4a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -0,0 +1,679 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include +#include + +#include "iwl-notif-wait.h" +#include "iwl-trans.h" +#include "iwl-op-mode.h" +#include "iwl-fw.h" +#include "iwl-debug.h" +#include "iwl-drv.h" +#include "iwl-modparams.h" +#include "mvm.h" +#include "iwl-phy-db.h" +#include "iwl-eeprom-parse.h" +#include "iwl-csr.h" +#include "iwl-io.h" +#include "iwl-prph.h" +#include "rs.h" +#include "fw-api-scan.h" +#include "time-event.h" + +/* + * module name, copyright, version, etc. + */ +#define DRV_DESCRIPTION "The new Intel(R) wireless AGN driver for Linux" + +#define DRV_VERSION IWLWIFI_VERSION + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); +MODULE_LICENSE("GPL"); + +static const struct iwl_op_mode_ops iwl_mvm_ops; + +struct iwl_mvm_mod_params iwlmvm_mod_params = { + .power_scheme = IWL_POWER_SCHEME_BPS, + /* rest of fields are 0 by default */ +}; + +module_param_named(init_dbg, iwlmvm_mod_params.init_dbg, bool, S_IRUGO); +MODULE_PARM_DESC(init_dbg, + "set to true to debug an ASSERT in INIT fw (default: false"); +module_param_named(power_scheme, iwlmvm_mod_params.power_scheme, int, S_IRUGO); +MODULE_PARM_DESC(power_scheme, + "power management scheme: 1-active, 2-balanced, 3-low power, default: 2"); + +/* + * module init and exit functions + */ +static int __init iwl_mvm_init(void) +{ + int ret; + + ret = iwl_mvm_rate_control_register(); + if (ret) { + pr_err("Unable to register rate control algorithm: %d\n", ret); + return ret; + } + + ret = iwl_opmode_register("iwlmvm", &iwl_mvm_ops); + + if (ret) { + pr_err("Unable to register MVM op_mode: %d\n", ret); + iwl_mvm_rate_control_unregister(); + } + + return ret; +} +module_init(iwl_mvm_init); + +static void __exit iwl_mvm_exit(void) +{ + iwl_opmode_deregister("iwlmvm"); + iwl_mvm_rate_control_unregister(); +} +module_exit(iwl_mvm_exit); + +static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + u8 radio_cfg_type, radio_cfg_step, radio_cfg_dash; + u32 reg_val = 0; + + /* + * We can't upload the correct value to the INIT image + * as we don't have nvm_data by that time. + * + * TODO: Figure out what we should do here + */ + if (mvm->nvm_data) { + radio_cfg_type = mvm->nvm_data->radio_cfg_type; + radio_cfg_step = mvm->nvm_data->radio_cfg_step; + radio_cfg_dash = mvm->nvm_data->radio_cfg_dash; + } else { + radio_cfg_type = 0; + radio_cfg_step = 0; + radio_cfg_dash = 0; + } + + /* SKU control */ + reg_val |= CSR_HW_REV_STEP(mvm->trans->hw_rev) << + CSR_HW_IF_CONFIG_REG_POS_MAC_STEP; + reg_val |= CSR_HW_REV_DASH(mvm->trans->hw_rev) << + CSR_HW_IF_CONFIG_REG_POS_MAC_DASH; + + /* radio configuration */ + reg_val |= radio_cfg_type << CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE; + reg_val |= radio_cfg_step << CSR_HW_IF_CONFIG_REG_POS_PHY_STEP; + reg_val |= radio_cfg_dash << CSR_HW_IF_CONFIG_REG_POS_PHY_DASH; + + WARN_ON((radio_cfg_type << CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE) & + ~CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE); + + /* silicon bits */ + reg_val |= CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI; + reg_val |= CSR_HW_IF_CONFIG_REG_BIT_MAC_SI; + + iwl_set_bits_mask(mvm->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | + CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP | + CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | + CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | + CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH | + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI, + reg_val); + + IWL_DEBUG_INFO(mvm, "Radio type=0x%x-0x%x-0x%x\n", radio_cfg_type, + radio_cfg_step, radio_cfg_dash); + + /* + * W/A : NIC is stuck in a reset state after Early PCIe power off + * (PCIe power is lost before PERST# is asserted), causing ME FW + * to lose ownership and not being able to obtain it back. + */ + iwl_set_bits_mask_prph(mvm->trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, + ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); +} + +struct iwl_rx_handlers { + u8 cmd_id; + bool async; + int (*fn)(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +}; + +#define RX_HANDLER(_cmd_id, _fn, _async) \ + { .cmd_id = _cmd_id , .fn = _fn , .async = _async } + +/* + * Handlers for fw notifications + * Convention: RX_HANDLER(CMD_NAME, iwl_mvm_rx_CMD_NAME + * This list should be in order of frequency for performance purposes. + * + * The handler can be SYNC - this means that it will be called in the Rx path + * which can't acquire mvm->mutex. If the handler needs to hold mvm->mutex (and + * only in this case!), it should be set as ASYNC. In that case, it will be + * called from a worker with mvm->mutex held. + */ +static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = { + RX_HANDLER(REPLY_RX_MPDU_CMD, iwl_mvm_rx_rx_mpdu, false), + RX_HANDLER(REPLY_RX_PHY_CMD, iwl_mvm_rx_rx_phy_cmd, false), + RX_HANDLER(TX_CMD, iwl_mvm_rx_tx_cmd, false), + RX_HANDLER(BA_NOTIF, iwl_mvm_rx_ba_notif, false), + RX_HANDLER(TIME_EVENT_NOTIFICATION, iwl_mvm_rx_time_event_notif, false), + + RX_HANDLER(SCAN_REQUEST_CMD, iwl_mvm_rx_scan_response, false), + RX_HANDLER(SCAN_COMPLETE_NOTIFICATION, iwl_mvm_rx_scan_complete, false), + + RX_HANDLER(RADIO_VERSION_NOTIFICATION, iwl_mvm_rx_radio_ver, false), + RX_HANDLER(CARD_STATE_NOTIFICATION, iwl_mvm_rx_card_state_notif, false), + + RX_HANDLER(REPLY_ERROR, iwl_mvm_rx_fw_error, false), +}; +#undef RX_HANDLER +#define CMD(x) [x] = #x + +static const char *iwl_mvm_cmd_strings[REPLY_MAX] = { + CMD(MVM_ALIVE), + CMD(REPLY_ERROR), + CMD(INIT_COMPLETE_NOTIF), + CMD(PHY_CONTEXT_CMD), + CMD(MGMT_MCAST_KEY), + CMD(TX_CMD), + CMD(TXPATH_FLUSH), + CMD(MAC_CONTEXT_CMD), + CMD(TIME_EVENT_CMD), + CMD(TIME_EVENT_NOTIFICATION), + CMD(BINDING_CONTEXT_CMD), + CMD(TIME_QUOTA_CMD), + CMD(RADIO_VERSION_NOTIFICATION), + CMD(SCAN_REQUEST_CMD), + CMD(SCAN_ABORT_CMD), + CMD(SCAN_START_NOTIFICATION), + CMD(SCAN_RESULTS_NOTIFICATION), + CMD(SCAN_COMPLETE_NOTIFICATION), + CMD(NVM_ACCESS_CMD), + CMD(PHY_CONFIGURATION_CMD), + CMD(CALIB_RES_NOTIF_PHY_DB), + CMD(SET_CALIB_DEFAULT_CMD), + CMD(CALIBRATION_COMPLETE_NOTIFICATION), + CMD(ADD_STA), + CMD(REMOVE_STA), + CMD(LQ_CMD), + CMD(SCAN_OFFLOAD_CONFIG_CMD), + CMD(SCAN_OFFLOAD_REQUEST_CMD), + CMD(SCAN_OFFLOAD_ABORT_CMD), + CMD(SCAN_OFFLOAD_COMPLETE), + CMD(SCAN_OFFLOAD_UPDATE_PROFILES_CMD), + CMD(POWER_TABLE_CMD), + CMD(WEP_KEY), + CMD(REPLY_RX_PHY_CMD), + CMD(REPLY_RX_MPDU_CMD), + CMD(BEACON_TEMPLATE_CMD), + CMD(STATISTICS_NOTIFICATION), + CMD(TX_ANT_CONFIGURATION_CMD), + CMD(D3_CONFIG_CMD), + CMD(PROT_OFFLOAD_CONFIG_CMD), + CMD(OFFLOADS_QUERY_CMD), + CMD(REMOTE_WAKE_CONFIG_CMD), + CMD(WOWLAN_PATTERNS), + CMD(WOWLAN_CONFIGURATION), + CMD(WOWLAN_TSC_RSC_PARAM), + CMD(WOWLAN_TKIP_PARAM), + CMD(WOWLAN_KEK_KCK_MATERIAL), + CMD(WOWLAN_GET_STATUSES), + CMD(WOWLAN_TX_POWER_PER_DB), + CMD(NET_DETECT_CONFIG_CMD), + CMD(NET_DETECT_PROFILES_QUERY_CMD), + CMD(NET_DETECT_PROFILES_CMD), + CMD(NET_DETECT_HOTSPOTS_CMD), + CMD(NET_DETECT_HOTSPOTS_QUERY_CMD), +}; +#undef CMD + +/* this forward declaration can avoid to export the function */ +static void iwl_mvm_async_handlers_wk(struct work_struct *wk); + +static struct iwl_op_mode * +iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, + const struct iwl_fw *fw, struct dentry *dbgfs_dir) +{ + struct ieee80211_hw *hw; + struct iwl_op_mode *op_mode; + struct iwl_mvm *mvm; + struct iwl_trans_config trans_cfg = {}; + static const u8 no_reclaim_cmds[] = { + TX_CMD, + }; + int err, scan_size; + + switch (cfg->device_family) { + case IWL_DEVICE_FAMILY_6030: + case IWL_DEVICE_FAMILY_6005: + case IWL_DEVICE_FAMILY_7000: + break; + default: + IWL_ERR(trans, "Trying to load mvm on an unsupported device\n"); + return NULL; + } + + /******************************** + * 1. Allocating and configuring HW data + ********************************/ + hw = ieee80211_alloc_hw(sizeof(struct iwl_op_mode) + + sizeof(struct iwl_mvm), + &iwl_mvm_hw_ops); + if (!hw) + return NULL; + + op_mode = hw->priv; + op_mode->ops = &iwl_mvm_ops; + op_mode->trans = trans; + + mvm = IWL_OP_MODE_GET_MVM(op_mode); + mvm->dev = trans->dev; + mvm->trans = trans; + mvm->cfg = cfg; + mvm->fw = fw; + mvm->hw = hw; + + mutex_init(&mvm->mutex); + spin_lock_init(&mvm->async_handlers_lock); + INIT_LIST_HEAD(&mvm->time_event_list); + INIT_LIST_HEAD(&mvm->async_handlers_list); + spin_lock_init(&mvm->time_event_lock); + + INIT_WORK(&mvm->async_handlers_wk, iwl_mvm_async_handlers_wk); + INIT_WORK(&mvm->roc_done_wk, iwl_mvm_roc_done_wk); + INIT_WORK(&mvm->sta_drained_wk, iwl_mvm_sta_drained_wk); + + SET_IEEE80211_DEV(mvm->hw, mvm->trans->dev); + + /* + * Populate the state variables that the transport layer needs + * to know about. + */ + trans_cfg.op_mode = op_mode; + trans_cfg.no_reclaim_cmds = no_reclaim_cmds; + trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds); + trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K; + + /* TODO: this should really be a TLV */ + if (cfg->device_family == IWL_DEVICE_FAMILY_7000) + trans_cfg.bc_table_dword = true; + + if (!iwlwifi_mod_params.wd_disable) + trans_cfg.queue_watchdog_timeout = cfg->base_params->wd_timeout; + else + trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED; + + trans_cfg.command_names = iwl_mvm_cmd_strings; + + trans_cfg.cmd_queue = IWL_MVM_CMD_QUEUE; + trans_cfg.cmd_fifo = IWL_MVM_CMD_FIFO; + + snprintf(mvm->hw->wiphy->fw_version, + sizeof(mvm->hw->wiphy->fw_version), + "%s", fw->fw_version); + + /* Configure transport layer */ + iwl_trans_configure(mvm->trans, &trans_cfg); + + trans->rx_mpdu_cmd = REPLY_RX_MPDU_CMD; + trans->rx_mpdu_cmd_hdr_size = sizeof(struct iwl_rx_mpdu_res_start); + + /* set up notification wait support */ + iwl_notification_wait_init(&mvm->notif_wait); + + /* Init phy db */ + mvm->phy_db = iwl_phy_db_init(trans); + if (!mvm->phy_db) { + IWL_ERR(mvm, "Cannot init phy_db\n"); + goto out_free; + } + + IWL_INFO(mvm, "Detected %s, REV=0x%X\n", + mvm->cfg->name, mvm->trans->hw_rev); + + err = iwl_trans_start_hw(mvm->trans); + if (err) + goto out_free; + + mutex_lock(&mvm->mutex); + err = iwl_run_init_mvm_ucode(mvm, true); + mutex_unlock(&mvm->mutex); + if (err && !iwlmvm_mod_params.init_dbg) { + IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", err); + goto out_free; + } + + /* Stop the hw after the ALIVE and NVM has been read */ + if (!iwlmvm_mod_params.init_dbg) + iwl_trans_stop_hw(mvm->trans, false); + + scan_size = sizeof(struct iwl_scan_cmd) + + mvm->fw->ucode_capa.max_probe_length + + (MAX_NUM_SCAN_CHANNELS * sizeof(struct iwl_scan_channel)); + mvm->scan_cmd = kmalloc(scan_size, GFP_KERNEL); + if (!mvm->scan_cmd) + goto out_free; + + err = iwl_mvm_mac_setup_register(mvm); + if (err) + goto out_free; + + err = iwl_mvm_dbgfs_register(mvm, dbgfs_dir); + if (err) + goto out_unregister; + + return op_mode; + + out_unregister: + ieee80211_unregister_hw(mvm->hw); + out_free: + iwl_phy_db_free(mvm->phy_db); + kfree(mvm->scan_cmd); + kfree(mvm->eeprom_blob); + iwl_trans_stop_hw(trans, true); + ieee80211_free_hw(mvm->hw); + return NULL; +} + +static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + int i; + + iwl_mvm_leds_exit(mvm); + + ieee80211_unregister_hw(mvm->hw); + + kfree(mvm->scan_cmd); + + iwl_trans_stop_hw(mvm->trans, true); + + iwl_phy_db_free(mvm->phy_db); + mvm->phy_db = NULL; + + kfree(mvm->eeprom_blob); + iwl_free_nvm_data(mvm->nvm_data); + for (i = 0; i < NVM_NUM_OF_SECTIONS; i++) + kfree(mvm->nvm_sections[i].data); + + ieee80211_free_hw(mvm->hw); +} + +struct iwl_async_handler_entry { + struct list_head list; + struct iwl_rx_cmd_buffer rxb; + int (*fn)(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +}; + +void iwl_mvm_async_handlers_purge(struct iwl_mvm *mvm) +{ + struct iwl_async_handler_entry *entry, *tmp; + + spin_lock_bh(&mvm->async_handlers_lock); + list_for_each_entry_safe(entry, tmp, &mvm->async_handlers_list, list) { + iwl_free_rxb(&entry->rxb); + list_del(&entry->list); + kfree(entry); + } + spin_unlock_bh(&mvm->async_handlers_lock); +} + +static void iwl_mvm_async_handlers_wk(struct work_struct *wk) +{ + struct iwl_mvm *mvm = + container_of(wk, struct iwl_mvm, async_handlers_wk); + struct iwl_async_handler_entry *entry, *tmp; + struct list_head local_list; + + INIT_LIST_HEAD(&local_list); + + /* Ensure that we are not in stop flow (check iwl_mvm_mac_stop) */ + mutex_lock(&mvm->mutex); + + /* + * Sync with Rx path with a lock. Remove all the entries from this list, + * add them to a local one (lock free), and then handle them. + */ + spin_lock_bh(&mvm->async_handlers_lock); + list_splice_init(&mvm->async_handlers_list, &local_list); + spin_unlock_bh(&mvm->async_handlers_lock); + + list_for_each_entry_safe(entry, tmp, &local_list, list) { + if (entry->fn(mvm, &entry->rxb, NULL)) + IWL_WARN(mvm, + "returned value from ASYNC handlers are ignored\n"); + iwl_free_rxb(&entry->rxb); + list_del(&entry->list); + kfree(entry); + } + mutex_unlock(&mvm->mutex); +} + +static int iwl_mvm_rx_dispatch(struct iwl_op_mode *op_mode, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + u8 i; + + /* + * Do the notification wait before RX handlers so + * even if the RX handler consumes the RXB we have + * access to it in the notification wait entry. + */ + iwl_notification_wait_notify(&mvm->notif_wait, pkt); + + for (i = 0; i < ARRAY_SIZE(iwl_mvm_rx_handlers); i++) { + const struct iwl_rx_handlers *rx_h = &iwl_mvm_rx_handlers[i]; + if (rx_h->cmd_id == pkt->hdr.cmd) { + struct iwl_async_handler_entry *entry; + if (!rx_h->async) + return rx_h->fn(mvm, rxb, cmd); + + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + /* we can't do much... */ + if (!entry) + return 0; + + entry->rxb._page = rxb_steal_page(rxb); + entry->rxb._offset = rxb->_offset; + entry->rxb._rx_page_order = rxb->_rx_page_order; + entry->fn = rx_h->fn; + spin_lock(&mvm->async_handlers_lock); + list_add_tail(&entry->list, &mvm->async_handlers_list); + spin_unlock(&mvm->async_handlers_lock); + schedule_work(&mvm->async_handlers_wk); + } + } + + return 0; +} + +static void iwl_mvm_stop_sw_queue(struct iwl_op_mode *op_mode, int queue) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + int mq = mvm->queue_to_mac80211[queue]; + + if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE)) + return; + + if (atomic_inc_return(&mvm->queue_stop_count[mq]) > 1) { + IWL_DEBUG_TX_QUEUES(mvm, + "queue %d (mac80211 %d) already stopped\n", + queue, mq); + return; + } + + set_bit(mq, &mvm->transport_queue_stop); + ieee80211_stop_queue(mvm->hw, mq); +} + +static void iwl_mvm_wake_sw_queue(struct iwl_op_mode *op_mode, int queue) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + int mq = mvm->queue_to_mac80211[queue]; + + if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE)) + return; + + if (atomic_dec_return(&mvm->queue_stop_count[mq]) > 0) { + IWL_DEBUG_TX_QUEUES(mvm, + "queue %d (mac80211 %d) already awake\n", + queue, mq); + return; + } + + clear_bit(mq, &mvm->transport_queue_stop); + + ieee80211_wake_queue(mvm->hw, mq); +} + +static void iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + + if (state) + set_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status); + else + clear_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status); + + wiphy_rfkill_set_hw_state(mvm->hw->wiphy, state); +} + +static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + struct ieee80211_tx_info *info; + + info = IEEE80211_SKB_CB(skb); + iwl_trans_free_tx_cmd(mvm->trans, info->driver_data[1]); + ieee80211_free_txskb(mvm->hw, skb); +} + +static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + + iwl_mvm_dump_nic_error_log(mvm); + + iwl_abort_notification_waits(&mvm->notif_wait); + + /* + * If we're restarting already, don't cycle restarts. + * If INIT fw asserted, it will likely fail again. + * If WoWLAN fw asserted, don't restart either, mac80211 + * can't recover this since we're already half suspended. + */ + if (test_and_set_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) { + IWL_ERR(mvm, "Firmware error during reconfiguration! Abort.\n"); + } else if (mvm->cur_ucode == IWL_UCODE_REGULAR && + iwlwifi_mod_params.restart_fw) { + /* + * This is a bit racy, but worst case we tell mac80211 about + * a stopped/aborted (sched) scan when that was already done + * which is not a problem. It is necessary to abort any scan + * here because mac80211 requires having the scan cleared + * before restarting. + * We'll reset the scan_status to NONE in restart cleanup in + * the next start() call from mac80211. + */ + switch (mvm->scan_status) { + case IWL_MVM_SCAN_NONE: + break; + case IWL_MVM_SCAN_OS: + ieee80211_scan_completed(mvm->hw, true); + break; + } + + ieee80211_restart_hw(mvm->hw); + } +} + +static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode) +{ + WARN_ON(1); +} + +static const struct iwl_op_mode_ops iwl_mvm_ops = { + .start = iwl_op_mode_mvm_start, + .stop = iwl_op_mode_mvm_stop, + .rx = iwl_mvm_rx_dispatch, + .queue_full = iwl_mvm_stop_sw_queue, + .queue_not_full = iwl_mvm_wake_sw_queue, + .hw_rf_kill = iwl_mvm_set_hw_rfkill_state, + .free_skb = iwl_mvm_free_skb, + .nic_error = iwl_mvm_nic_error, + .cmd_queue_full = iwl_mvm_cmd_queue_full, + .nic_config = iwl_mvm_nic_config, +}; diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c new file mode 100644 index 0000000..b428448 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c @@ -0,0 +1,292 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include "fw-api.h" +#include "mvm.h" + +/* Maps the driver specific channel width definition to the the fw values */ +static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef) +{ + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + return PHY_VHT_CHANNEL_MODE20; + case NL80211_CHAN_WIDTH_40: + return PHY_VHT_CHANNEL_MODE40; + case NL80211_CHAN_WIDTH_80: + return PHY_VHT_CHANNEL_MODE80; + case NL80211_CHAN_WIDTH_160: + return PHY_VHT_CHANNEL_MODE160; + default: + WARN(1, "Invalid channel width=%u", chandef->width); + return PHY_VHT_CHANNEL_MODE20; + } +} + +/* + * Maps the driver specific control channel position (relative to the center + * freq) definitions to the the fw values + */ +static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef) +{ + switch (chandef->chan->center_freq - chandef->center_freq1) { + case -70: + return PHY_VHT_CTRL_POS_4_BELOW; + case -50: + return PHY_VHT_CTRL_POS_3_BELOW; + case -30: + return PHY_VHT_CTRL_POS_2_BELOW; + case -10: + return PHY_VHT_CTRL_POS_1_BELOW; + case 10: + return PHY_VHT_CTRL_POS_1_ABOVE; + case 30: + return PHY_VHT_CTRL_POS_2_ABOVE; + case 50: + return PHY_VHT_CTRL_POS_3_ABOVE; + case 70: + return PHY_VHT_CTRL_POS_4_ABOVE; + default: + WARN(1, "Invalid channel definition"); + case 0: + /* + * The FW is expected to check the control channel position only + * when in HT/VHT and the channel width is not 20MHz. Return + * this value as the default one. + */ + return PHY_VHT_CTRL_POS_1_BELOW; + } +} + +/* + * Construct the generic fields of the PHY context command + */ +static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt, + struct iwl_phy_context_cmd *cmd, + u32 action, u32 apply_time) +{ + memset(cmd, 0, sizeof(struct iwl_phy_context_cmd)); + + cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id, + ctxt->color)); + cmd->action = cpu_to_le32(action); + cmd->apply_time = cpu_to_le32(apply_time); +} + +/* + * Add the phy configuration to the PHY context command + */ +static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm, + struct iwl_phy_context_cmd *cmd, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic) +{ + u8 valid_rx_chains, active_cnt, idle_cnt; + + /* Set the channel info data */ + cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ? + PHY_BAND_24 : PHY_BAND_5); + + cmd->ci.channel = chandef->chan->hw_value; + cmd->ci.width = iwl_mvm_get_channel_width(chandef); + cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef); + + /* Set rx the chains */ + + /* TODO: + * Need to add on chain noise calibration limitations, and + * BT coex considerations. + */ + valid_rx_chains = mvm->nvm_data->valid_rx_ant; + idle_cnt = chains_static; + active_cnt = chains_dynamic; + + cmd->rxchain_info = cpu_to_le32(valid_rx_chains << + PHY_RX_CHAIN_VALID_POS); + cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS); + cmd->rxchain_info |= cpu_to_le32(active_cnt << + PHY_RX_CHAIN_MIMO_CNT_POS); + + cmd->txchain_info = cpu_to_le32(mvm->nvm_data->valid_tx_ant); +} + +/* + * Send a command to apply the current phy configuration. The command is send + * only if something in the configuration changed: in case that this is the + * first time that the phy configuration is applied or in case that the phy + * configuration changed from the previous apply. + */ +static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm, + struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic, + u32 action, u32 apply_time) +{ + struct iwl_phy_context_cmd cmd; + int ret; + + /* Set the command header fields */ + iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time); + + /* Set the command data */ + iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef, + chains_static, chains_dynamic); + + ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC, + sizeof(struct iwl_phy_context_cmd), + &cmd); + if (ret) + IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret); + return ret; +} + + +struct phy_ctx_used_data { + unsigned long used[BITS_TO_LONGS(NUM_PHY_CTX)]; +}; + +static void iwl_mvm_phy_ctx_used_iter(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + void *_data) +{ + struct phy_ctx_used_data *data = _data; + struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv; + + __set_bit(phy_ctxt->id, data->used); +} + +/* + * Send a command to add a PHY context based on the current HW configuration. + */ +int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic) +{ + struct phy_ctx_used_data data = { + .used = { }, + }; + + /* + * If this is a regular PHY context (not the ROC one) + * skip the ROC PHY context's ID. + */ + if (ctxt != &mvm->phy_ctxt_roc) + __set_bit(mvm->phy_ctxt_roc.id, data.used); + + lockdep_assert_held(&mvm->mutex); + ctxt->color++; + + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) { + ieee80211_iter_chan_contexts_atomic( + mvm->hw, iwl_mvm_phy_ctx_used_iter, &data); + + ctxt->id = find_first_zero_bit(data.used, NUM_PHY_CTX); + if (WARN_ONCE(ctxt->id == NUM_PHY_CTX, + "Failed to init PHY context - no free ID!\n")) + return -EIO; + } + + ctxt->channel = chandef->chan; + return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef, + chains_static, chains_dynamic, + FW_CTXT_ACTION_ADD, 0); +} + +/* + * Send a command to modify the PHY context based on the current HW + * configuration. Note that the function does not check that the configuration + * changed. + */ +int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic) +{ + lockdep_assert_held(&mvm->mutex); + + ctxt->channel = chandef->chan; + return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef, + chains_static, chains_dynamic, + FW_CTXT_ACTION_MODIFY, 0); +} + +/* + * Send a command to the FW to remove the given phy context. + * Once the command is sent, regardless of success or failure, the context is + * marked as invalid + */ +void iwl_mvm_phy_ctxt_remove(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt) +{ + struct iwl_phy_context_cmd cmd; + int ret; + + lockdep_assert_held(&mvm->mutex); + + iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, FW_CTXT_ACTION_REMOVE, 0); + ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC, + sizeof(struct iwl_phy_context_cmd), + &cmd); + if (ret) + IWL_ERR(mvm, "Failed to send PHY remove: ctxt id=%d\n", + ctxt->id); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c new file mode 100644 index 0000000..6362873 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -0,0 +1,207 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include +#include +#include + +#include + +#include "iwl-debug.h" +#include "mvm.h" +#include "iwl-modparams.h" +#include "fw-api-power.h" + +#define POWER_KEEP_ALIVE_PERIOD_SEC 25 + +static void iwl_power_build_cmd(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_powertable_cmd *cmd) +{ + struct ieee80211_hw *hw = mvm->hw; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct ieee80211_chanctx_conf *chanctx_conf; + struct ieee80211_channel *chan; + int dtimper, dtimper_msec; + int keep_alive; + bool radar_detect = false; + + cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color)); + cmd->action = cpu_to_le32(FW_CTXT_ACTION_MODIFY); + + if ((!vif->bss_conf.ps) || + (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)) + return; + + cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK); + + dtimper = hw->conf.ps_dtim_period ?: 1; + + /* Check if radar detection is required on current channel */ + rcu_read_lock(); + chanctx_conf = rcu_dereference(vif->chanctx_conf); + WARN_ON(!chanctx_conf); + if (chanctx_conf) { + chan = chanctx_conf->def.chan; + radar_detect = chan->flags & IEEE80211_CHAN_RADAR; + } + rcu_read_unlock(); + + /* Check skip over DTIM conditions */ + if (!radar_detect && (dtimper <= 10) && + (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_LP)) { + cmd->flags |= cpu_to_le16(POWER_FLAGS_SLEEP_OVER_DTIM_MSK); + cmd->num_skip_dtim = 2; + } + + /* Check that keep alive period is at least 3 * DTIM */ + dtimper_msec = dtimper * vif->bss_conf.beacon_int; + keep_alive = max_t(int, 3 * dtimper_msec, + MSEC_PER_SEC * POWER_KEEP_ALIVE_PERIOD_SEC); + keep_alive = DIV_ROUND_UP(keep_alive, MSEC_PER_SEC); + + cmd->keep_alive_seconds = cpu_to_le16(keep_alive); + + if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_LP) { + /* TODO: Also for D3 (device sleep / WoWLAN) */ + cmd->rx_data_timeout = cpu_to_le32(10); + cmd->tx_data_timeout = cpu_to_le32(10); + } else { + cmd->rx_data_timeout = cpu_to_le32(50); + cmd->tx_data_timeout = cpu_to_le32(50); + } +} + +int iwl_mvm_power_update_mode(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_powertable_cmd cmd = {}; + + if (!iwlwifi_mod_params.power_save) { + IWL_DEBUG_POWER(mvm, "Power management is not allowed\n"); + return 0; + } + + if (vif->type != NL80211_IFTYPE_STATION || vif->p2p) + return 0; + + iwl_power_build_cmd(mvm, vif, &cmd); + + IWL_DEBUG_POWER(mvm, + "Sending power table command on mac id 0x%X for power level %d, flags = 0x%X\n", + cmd.id_and_color, iwlmvm_mod_params.power_scheme, + le16_to_cpu(cmd.flags)); + + if (cmd.flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK)) { + IWL_DEBUG_POWER(mvm, "Keep alive = %u sec\n", + le16_to_cpu(cmd.keep_alive_seconds)); + IWL_DEBUG_POWER(mvm, "Rx timeout = %u usec\n", + le32_to_cpu(cmd.rx_data_timeout)); + IWL_DEBUG_POWER(mvm, "Tx timeout = %u usec\n", + le32_to_cpu(cmd.tx_data_timeout)); + IWL_DEBUG_POWER(mvm, "Rx timeout (uAPSD) = %u usec\n", + le32_to_cpu(cmd.rx_data_timeout_uapsd)); + IWL_DEBUG_POWER(mvm, "Tx timeout = %u usec\n", + le32_to_cpu(cmd.tx_data_timeout_uapsd)); + IWL_DEBUG_POWER(mvm, "LP RX RSSI threshold = %u\n", + cmd.lprx_rssi_threshold); + IWL_DEBUG_POWER(mvm, "DTIMs to skip = %u\n", cmd.num_skip_dtim); + } + + return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_SYNC, + sizeof(cmd), &cmd); +} + +int iwl_mvm_power_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif) +{ + struct iwl_powertable_cmd cmd = {}; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (!iwlwifi_mod_params.power_save) { + IWL_DEBUG_POWER(mvm, "Power management is not allowed\n"); + return 0; + } + + if (vif->type != NL80211_IFTYPE_STATION || vif->p2p) + return 0; + + cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color)); + cmd.action = cpu_to_le32(FW_CTXT_ACTION_MODIFY); + + IWL_DEBUG_POWER(mvm, + "Sending power table command on mac id 0x%X for power level %d, flags = 0x%X\n", + cmd.id_and_color, iwlmvm_mod_params.power_scheme, + le16_to_cpu(cmd.flags)); + + return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_SYNC, + sizeof(cmd), &cmd); +} + +#ifdef CONFIG_IWLWIFI_DEBUGFS +void iwl_power_get_params(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_powertable_cmd *cmd) +{ + iwl_power_build_cmd(mvm, vif, cmd); +} +#endif /* CONFIG_IWLWIFI_DEBUGFS */ diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c new file mode 100644 index 0000000..2d4611a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/quota.c @@ -0,0 +1,178 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include "fw-api.h" +#include "mvm.h" + +struct iwl_mvm_quota_iterator_data { + int n_interfaces[MAX_BINDINGS]; + int colors[MAX_BINDINGS]; + struct ieee80211_vif *new_vif; +}; + +static void iwl_mvm_quota_iterator(void *_data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_quota_iterator_data *data = _data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + u16 id; + + /* + * We'll account for the new interface (if any) below, + * skip it here in case we're not called from within + * the add_interface callback (otherwise it won't show + * up in iteration) + */ + if (vif == data->new_vif) + return; + + if (!mvmvif->phy_ctxt) + return; + + /* currently, PHY ID == binding ID */ + id = mvmvif->phy_ctxt->id; + + /* need at least one binding per PHY */ + BUILD_BUG_ON(NUM_PHY_CTX > MAX_BINDINGS); + + if (WARN_ON_ONCE(id >= MAX_BINDINGS)) + return; + + if (data->colors[id] < 0) + data->colors[id] = mvmvif->phy_ctxt->color; + else + WARN_ON_ONCE(data->colors[id] != mvmvif->phy_ctxt->color); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + if (vif->bss_conf.assoc) + data->n_interfaces[id]++; + break; + case NL80211_IFTYPE_AP: + if (mvmvif->ap_active) + data->n_interfaces[id]++; + break; + case NL80211_IFTYPE_MONITOR: + data->n_interfaces[id]++; + break; + case NL80211_IFTYPE_P2P_DEVICE: + break; + case NL80211_IFTYPE_ADHOC: + if (vif->bss_conf.ibss_joined) + data->n_interfaces[id]++; + break; + default: + WARN_ON_ONCE(1); + break; + } +} + +int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif) +{ + struct iwl_time_quota_cmd cmd; + int i, idx, ret; + struct iwl_mvm_quota_iterator_data data = { + .n_interfaces = {}, + .colors = { -1, -1, -1, -1 }, + .new_vif = newvif, + }; + + /* update all upon completion */ + if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) + return 0; + + BUILD_BUG_ON(data.colors[MAX_BINDINGS - 1] != -1); + + lockdep_assert_held(&mvm->mutex); + + memset(&cmd, 0, sizeof(cmd)); + + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_quota_iterator, &data); + if (newvif) { + data.new_vif = NULL; + iwl_mvm_quota_iterator(&data, newvif->addr, newvif); + } + + for (idx = 0, i = 0; i < MAX_BINDINGS; i++) { + if (data.n_interfaces[i] <= 0) + continue; + + cmd.quotas[idx].id_and_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(i, data.colors[i])); + cmd.quotas[idx].quota = cpu_to_le32(100); + cmd.quotas[idx].max_duration = cpu_to_le32(1000); + idx++; + } + + for (i = idx; i < MAX_BINDINGS; i++) + cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID); + + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, CMD_SYNC, + sizeof(cmd), &cmd); + if (ret) + IWL_ERR(mvm, "Failed to send quota: %d\n", ret); + return ret; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c new file mode 100644 index 0000000..60a4291 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -0,0 +1,3096 @@ +/****************************************************************************** + * + * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include "rs.h" +#include "fw-api.h" +#include "sta.h" +#include "iwl-op-mode.h" +#include "mvm.h" + +#define RS_NAME "iwl-mvm-rs" + +#define NUM_TRY_BEFORE_ANT_TOGGLE 1 +#define IWL_NUMBER_TRY 1 +#define IWL_HT_NUMBER_TRY 3 + +#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ +#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ +#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ + +/* max allowed rate miss before sync LQ cmd */ +#define IWL_MISSED_RATE_MAX 15 +/* max time to accum history 2 seconds */ +#define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ) + +static u8 rs_ht_to_legacy[] = { + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX +}; + +static const u8 ant_toggle_lookup[] = { + /*ANT_NONE -> */ ANT_NONE, + /*ANT_A -> */ ANT_B, + /*ANT_B -> */ ANT_C, + /*ANT_AB -> */ ANT_BC, + /*ANT_C -> */ ANT_A, + /*ANT_AC -> */ ANT_AB, + /*ANT_BC -> */ ANT_AC, + /*ANT_ABC -> */ ANT_ABC, +}; + +#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ + [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ + IWL_RATE_SISO_##s##M_PLCP, \ + IWL_RATE_MIMO2_##s##M_PLCP,\ + IWL_RATE_MIMO3_##s##M_PLCP,\ + IWL_RATE_##r##M_IEEE, \ + IWL_RATE_##ip##M_INDEX, \ + IWL_RATE_##in##M_INDEX, \ + IWL_RATE_##rp##M_INDEX, \ + IWL_RATE_##rn##M_INDEX, \ + IWL_RATE_##pp##M_INDEX, \ + IWL_RATE_##np##M_INDEX } + +/* + * Parameter order: + * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to IWL_RATE_INVALID + * + */ +static const struct iwl_rs_rate_info iwl_rates[IWL_RATE_COUNT] = { + IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ + IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ + /* FIXME:RS: ^^ should be INV (legacy) */ +}; + +static inline u8 rs_extract_rate(u32 rate_n_flags) +{ + /* also works for HT because bits 7:6 are zero there */ + return (u8)(rate_n_flags & RATE_LEGACY_RATE_MSK); +} + +static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) +{ + int idx = 0; + + /* HT rate format */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = rs_extract_rate(rate_n_flags); + + if (idx >= IWL_RATE_MIMO3_6M_PLCP) + idx = idx - IWL_RATE_MIMO3_6M_PLCP; + else if (idx >= IWL_RATE_MIMO2_6M_PLCP) + idx = idx - IWL_RATE_MIMO2_6M_PLCP; + + idx += IWL_FIRST_OFDM_RATE; + /* skip 9M not supported in ht*/ + if (idx >= IWL_RATE_9M_INDEX) + idx += 1; + if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) + return idx; + + /* legacy rate format, search for match in table */ + } else { + for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) + if (iwl_rates[idx].plcp == + rs_extract_rate(rate_n_flags)) + return idx; + } + + return -1; +} + +static void rs_rate_scale_perform(struct iwl_mvm *mvm, + struct sk_buff *skb, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta); +static void rs_fill_link_cmd(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, u32 rate_n_flags); +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); + + +#ifdef CONFIG_MAC80211_DEBUGFS +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index); +#else +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{} +#endif + +/** + * The following tables contain the expected throughput metrics for all rates + * + * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits + * + * where invalid entries are zeros. + * + * CCK rates are only valid in legacy table and will only be used in G + * (2.4 GHz) band. + */ + +static s32 expected_tpt_legacy[IWL_RATE_COUNT] = { + 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0 +}; + +static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */ + {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */ + {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */ + {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */ +}; + +static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */ + {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */ + {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */ + {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */ + {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */ + {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */ + {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/ +}; + +static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */ + {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */ + {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */ + {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */ + {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */ + {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */ + {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */ + {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */ + {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */ + {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */ +}; + +/* mbps, mcs */ +static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { + { "1", "BPSK DSSS"}, + { "2", "QPSK DSSS"}, + {"5.5", "BPSK CCK"}, + { "11", "QPSK CCK"}, + { "6", "BPSK 1/2"}, + { "9", "BPSK 1/2"}, + { "12", "QPSK 1/2"}, + { "18", "QPSK 3/4"}, + { "24", "16QAM 1/2"}, + { "36", "16QAM 3/4"}, + { "48", "64QAM 2/3"}, + { "54", "64QAM 3/4"}, + { "60", "64QAM 5/6"}, +}; + +#define MCS_INDEX_PER_STREAM (8) + +static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) +{ + window->data = 0; + window->success_counter = 0; + window->success_ratio = IWL_INVALID_VALUE; + window->counter = 0; + window->average_tpt = IWL_INVALID_VALUE; + window->stamp = 0; +} + +static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) +{ + return (ant_type & valid_antenna) == ant_type; +} + +/* + * removes the old data from the statistics. All data that is older than + * TID_MAX_TIME_DIFF, will be deleted. + */ +static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) +{ + /* The oldest age we want to keep */ + u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; + + while (tl->queue_count && + (tl->time_stamp < oldest_time)) { + tl->total -= tl->packet_count[tl->head]; + tl->packet_count[tl->head] = 0; + tl->time_stamp += TID_QUEUE_CELL_SPACING; + tl->queue_count--; + tl->head++; + if (tl->head >= TID_QUEUE_MAX_SIZE) + tl->head = 0; + } +} + +/* + * increment traffic load value for tid and also remove + * any old values if passed the certain time period + */ +static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, + struct ieee80211_hdr *hdr) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + u8 tid; + + if (ieee80211_is_data_qos(hdr->frame_control)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } else { + return IWL_MAX_TID_COUNT; + } + + if (unlikely(tid >= IWL_MAX_TID_COUNT)) + return IWL_MAX_TID_COUNT; + + tl = &lq_data->load[tid]; + + curr_time -= curr_time % TID_ROUND_VALUE; + + /* Happens only for the first packet. Initialize the data */ + if (!(tl->queue_count)) { + tl->total = 1; + tl->time_stamp = curr_time; + tl->queue_count = 1; + tl->head = 0; + tl->packet_count[0] = 1; + return IWL_MAX_TID_COUNT; + } + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + index = (tl->head + index) % TID_QUEUE_MAX_SIZE; + tl->packet_count[index] = tl->packet_count[index] + 1; + tl->total = tl->total + 1; + + if ((index + 1) > tl->queue_count) + tl->queue_count = index + 1; + + return tid; +} + +#ifdef CONFIG_MAC80211_DEBUGFS +/** + * Program the device to use fixed rate for frame transmit + * This is for debugging/testing only + * once the device start use fixed rate, we need to reload the module + * to being back the normal operation. + */ +static void rs_program_fix_rate(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta) +{ + lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + + IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n", + lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); + + if (lq_sta->dbg_fixed_rate) { + rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); + iwl_mvm_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false); + } +} +#endif + +/* + get the traffic load value for tid +*/ +static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + + if (tid >= IWL_MAX_TID_COUNT) + return 0; + + tl = &(lq_data->load[tid]); + + curr_time -= curr_time % TID_ROUND_VALUE; + + if (!(tl->queue_count)) + return 0; + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + return tl->total; +} + +static int rs_tl_turn_on_agg_for_tid(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_data, u8 tid, + struct ieee80211_sta *sta) +{ + int ret = -EAGAIN; + u32 load; + + load = rs_tl_get_load(lq_data, tid); + + if ((iwlwifi_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) { + IWL_DEBUG_HT(mvm, "Starting Tx agg: STA: %pM tid: %d\n", + sta->addr, tid); + ret = ieee80211_start_tx_ba_session(sta, tid, 5000); + if (ret == -EAGAIN) { + /* + * driver and mac80211 is out of sync + * this might be cause by reloading firmware + * stop the tx ba session here + */ + IWL_ERR(mvm, "Fail start Tx agg on tid: %d\n", + tid); + ieee80211_stop_tx_ba_session(sta, tid); + } + } else { + IWL_DEBUG_HT(mvm, + "Aggregation not enabled for tid %d because load = %u\n", + tid, load); + } + return ret; +} + +static void rs_tl_turn_on_agg(struct iwl_mvm *mvm, u8 tid, + struct iwl_lq_sta *lq_data, + struct ieee80211_sta *sta) +{ + if (tid < IWL_MAX_TID_COUNT) + rs_tl_turn_on_agg_for_tid(mvm, lq_data, tid, sta); + else + IWL_ERR(mvm, "tid exceeds max TID count: %d/%d\n", + tid, IWL_MAX_TID_COUNT); +} + +static inline int get_num_of_ant_from_rate(u32 rate_n_flags) +{ + return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); +} + +/* + * Static function to get the expected throughput from an iwl_scale_tbl_info + * that wraps a NULL pointer check + */ +static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) +{ + if (tbl->expected_tpt) + return tbl->expected_tpt[rs_index]; + return 0; +} + +/** + * rs_collect_tx_data - Update the success/failure sliding window + * + * We keep a sliding window of the last 62 packets transmitted + * at this rate. window->data contains the bitmask of successful + * packets. + */ +static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl, + int scale_index, int attempts, int successes) +{ + struct iwl_rate_scale_data *window = NULL; + static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); + s32 fail_count, tpt; + + if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) + return -EINVAL; + + /* Select window for current tx bit rate */ + window = &(tbl->win[scale_index]); + + /* Get expected throughput */ + tpt = get_expected_tpt(tbl, scale_index); + + /* + * Keep track of only the latest 62 tx frame attempts in this rate's + * history window; anything older isn't really relevant any more. + * If we have filled up the sliding window, drop the oldest attempt; + * if the oldest attempt (highest bit in bitmap) shows "success", + * subtract "1" from the success counter (this is the main reason + * we keep these bitmaps!). + */ + while (attempts > 0) { + if (window->counter >= IWL_RATE_MAX_WINDOW) { + /* remove earliest */ + window->counter = IWL_RATE_MAX_WINDOW - 1; + + if (window->data & mask) { + window->data &= ~mask; + window->success_counter--; + } + } + + /* Increment frames-attempted counter */ + window->counter++; + + /* Shift bitmap by one frame to throw away oldest history */ + window->data <<= 1; + + /* Mark the most recent #successes attempts as successful */ + if (successes > 0) { + window->success_counter++; + window->data |= 0x1; + successes--; + } + + attempts--; + } + + /* Calculate current success ratio, avoid divide-by-0! */ + if (window->counter > 0) + window->success_ratio = 128 * (100 * window->success_counter) + / window->counter; + else + window->success_ratio = IWL_INVALID_VALUE; + + fail_count = window->counter - window->success_counter; + + /* Calculate average throughput, if we have enough history. */ + if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || + (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) + window->average_tpt = (window->success_ratio * tpt + 64) / 128; + else + window->average_tpt = IWL_INVALID_VALUE; + + /* Tag this window as having been updated */ + window->stamp = jiffies; + + return 0; +} + +/* + * Fill uCode API rate_n_flags field, based on "search" or "active" table. + */ +/* FIXME:RS:remove this function and put the flags statically in the table */ +static u32 rate_n_flags_from_tbl(struct iwl_mvm *mvm, + struct iwl_scale_tbl_info *tbl, + int index, u8 use_green) +{ + u32 rate_n_flags = 0; + + if (is_legacy(tbl->lq_type)) { + rate_n_flags = iwl_rates[index].plcp; + if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) + rate_n_flags |= RATE_MCS_CCK_MSK; + } else if (is_Ht(tbl->lq_type)) { + if (index > IWL_LAST_OFDM_RATE) { + IWL_ERR(mvm, "Invalid HT rate index %d\n", index); + index = IWL_LAST_OFDM_RATE; + } + rate_n_flags = RATE_MCS_HT_MSK; + + if (is_siso(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_siso; + else if (is_mimo2(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_mimo2; + else + rate_n_flags |= iwl_rates[index].plcp_mimo3; + } else { + IWL_ERR(mvm, "Invalid tbl->lq_type %d\n", tbl->lq_type); + } + + rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & + RATE_MCS_ANT_ABC_MSK); + + if (is_Ht(tbl->lq_type)) { + if (tbl->is_ht40) + rate_n_flags |= RATE_MCS_CHAN_WIDTH_40; + if (tbl->is_SGI) + rate_n_flags |= RATE_MCS_SGI_MSK; + + if (use_green) { + rate_n_flags |= RATE_HT_MCS_GF_MSK; + if (is_siso(tbl->lq_type) && tbl->is_SGI) { + rate_n_flags &= ~RATE_MCS_SGI_MSK; + IWL_ERR(mvm, "GF was set with SGI:SISO\n"); + } + } + } + return rate_n_flags; +} + +/* + * Interpret uCode API's rate_n_flags format, + * fill "search" or "active" tx mode table. + */ +static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, + enum ieee80211_band band, + struct iwl_scale_tbl_info *tbl, + int *rate_idx) +{ + u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); + u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); + u8 mcs; + + memset(tbl, 0, sizeof(struct iwl_scale_tbl_info)); + *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); + + if (*rate_idx == IWL_RATE_INVALID) { + *rate_idx = -1; + return -EINVAL; + } + tbl->is_SGI = 0; /* default legacy setup */ + tbl->is_ht40 = 0; + tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); + tbl->lq_type = LQ_NONE; + tbl->max_search = IWL_MAX_SEARCH; + + /* legacy rate format */ + if (!(rate_n_flags & RATE_MCS_HT_MSK)) { + if (num_of_ant == 1) { + if (band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + } + /* HT rate format */ + } else { + if (rate_n_flags & RATE_MCS_SGI_MSK) + tbl->is_SGI = 1; + + if (rate_n_flags & RATE_MCS_CHAN_WIDTH_40) /* TODO */ + tbl->is_ht40 = 1; + + mcs = rs_extract_rate(rate_n_flags); + + /* SISO */ + if (mcs <= IWL_RATE_SISO_60M_PLCP) { + if (num_of_ant == 1) + tbl->lq_type = LQ_SISO; /*else NONE*/ + /* MIMO2 */ + } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { + if (num_of_ant == 2) + tbl->lq_type = LQ_MIMO2; + /* MIMO3 */ + } else { + if (num_of_ant == 3) { + tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; + tbl->lq_type = LQ_MIMO3; + } + } + } + return 0; +} + +/* switch to another antenna/antennas and return 1 */ +/* if no other valid antenna found, return 0 */ +static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, + struct iwl_scale_tbl_info *tbl) +{ + u8 new_ant_type; + + if (!tbl->ant_type || tbl->ant_type > ANT_ABC) + return 0; + + if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) + return 0; + + new_ant_type = ant_toggle_lookup[tbl->ant_type]; + + while ((new_ant_type != tbl->ant_type) && + !rs_is_valid_ant(valid_ant, new_ant_type)) + new_ant_type = ant_toggle_lookup[new_ant_type]; + + if (new_ant_type == tbl->ant_type) + return 0; + + tbl->ant_type = new_ant_type; + *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; + *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; + return 1; +} + +/** + * Green-field mode is valid if the station supports it and + * there are no non-GF stations present in the BSS. + */ +static bool rs_use_green(struct ieee80211_sta *sta) +{ + struct iwl_mvm_sta *sta_priv = (void *)sta->drv_priv; + + bool use_green = !(sta_priv->vif->bss_conf.ht_operation_mode & + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + + return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && use_green; +} + +/** + * rs_get_supported_rates - get the available rates + * + * if management frame or broadcast frame only return + * basic available rates. + * + */ +static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, + struct ieee80211_hdr *hdr, + enum iwl_table_type rate_type) +{ + if (is_legacy(rate_type)) { + return lq_sta->active_legacy_rate; + } else { + if (is_siso(rate_type)) + return lq_sta->active_siso_rate; + else if (is_mimo2(rate_type)) + return lq_sta->active_mimo2_rate; + else + return lq_sta->active_mimo3_rate; + } +} + +static u16 rs_get_adjacent_rate(struct iwl_mvm *mvm, u8 index, u16 rate_mask, + int rate_type) +{ + u8 high = IWL_RATE_INVALID; + u8 low = IWL_RATE_INVALID; + + /* 802.11A or ht walks to the next literal adjacent rate in + * the rate table */ + if (is_a_band(rate_type) || !is_legacy(rate_type)) { + int i; + u32 mask; + + /* Find the previous rate that is in the rate mask */ + i = index - 1; + for (mask = (1 << i); i >= 0; i--, mask >>= 1) { + if (rate_mask & mask) { + low = i; + break; + } + } + + /* Find the next rate that is in the rate mask */ + i = index + 1; + for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { + if (rate_mask & mask) { + high = i; + break; + } + } + + return (high << 8) | low; + } + + low = index; + while (low != IWL_RATE_INVALID) { + low = iwl_rates[low].prev_rs; + if (low == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << low)) + break; + IWL_DEBUG_RATE(mvm, "Skipping masked lower rate: %d\n", low); + } + + high = index; + while (high != IWL_RATE_INVALID) { + high = iwl_rates[high].next_rs; + if (high == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << high)) + break; + IWL_DEBUG_RATE(mvm, "Skipping masked higher rate: %d\n", high); + } + + return (high << 8) | low; +} + +static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + u8 scale_index, u8 ht_possible) +{ + s32 low; + u16 rate_mask; + u16 high_low; + u8 switch_to_legacy = 0; + u8 is_green = lq_sta->is_green; + struct iwl_mvm *mvm = lq_sta->drv; + + /* check if we need to switch from HT to legacy rates. + * assumption is that mandatory rates (1Mbps or 6Mbps) + * are always supported (spec demand) */ + if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { + switch_to_legacy = 1; + scale_index = rs_ht_to_legacy[scale_index]; + if (lq_sta->band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + + if (num_of_ant(tbl->ant_type) > 1) + tbl->ant_type = + first_antenna(mvm->nvm_data->valid_tx_ant); + + tbl->is_ht40 = 0; + tbl->is_SGI = 0; + tbl->max_search = IWL_MAX_SEARCH; + } + + rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); + + /* Mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + /* supp_rates has no CCK bits in A mode */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + rate_mask = (u16)(rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_mask = (u16)(rate_mask & lq_sta->supp_rates); + } + + /* If we switched from HT to legacy, check current rate */ + if (switch_to_legacy && (rate_mask & (1 << scale_index))) { + low = scale_index; + goto out; + } + + high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, + tbl->lq_type); + low = high_low & 0xff; + + if (low == IWL_RATE_INVALID) + low = scale_index; + +out: + return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green); +} + +/* + * Simple function to compare two rate scale table types + */ +static bool table_type_matches(struct iwl_scale_tbl_info *a, + struct iwl_scale_tbl_info *b) +{ + return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) && + (a->is_SGI == b->is_SGI); +} + +/* + * mac80211 sends us Tx status + */ +static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb) +{ + int legacy_success; + int retries; + int rs_index, mac_index, i; + struct iwl_lq_sta *lq_sta = priv_sta; + struct iwl_lq_cmd *table; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct iwl_op_mode *op_mode = (struct iwl_op_mode *)mvm_r; + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + enum mac80211_rate_control_flags mac_flags; + u32 tx_rate; + struct iwl_scale_tbl_info tbl_type; + struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; + + IWL_DEBUG_RATE_LIMIT(mvm, + "get frame ack response, update rate scale window\n"); + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (!lq_sta) { + IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); + return; + } else if (!lq_sta->drv) { + IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); + return; + } + + if (!ieee80211_is_data(hdr->frame_control) || + info->flags & IEEE80211_TX_CTL_NO_ACK) + return; + + /* This packet was aggregated but doesn't carry status info */ + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && + !(info->flags & IEEE80211_TX_STAT_AMPDU)) + return; + + /* + * Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + table = &lq_sta->lq; + tx_rate = le32_to_cpu(table->rs_table[0]); + rs_get_tbl_info_from_mcs(tx_rate, info->band, &tbl_type, &rs_index); + if (info->band == IEEE80211_BAND_5GHZ) + rs_index -= IWL_FIRST_OFDM_RATE; + mac_flags = info->status.rates[0].flags; + mac_index = info->status.rates[0].idx; + /* For HT packets, map MCS to PLCP */ + if (mac_flags & IEEE80211_TX_RC_MCS) { + /* Remove # of streams */ + mac_index &= RATE_HT_MCS_RATE_CODE_MSK; + if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) + mac_index++; + /* + * mac80211 HT index is always zero-indexed; we need to move + * HT OFDM rates after CCK rates in 2.4 GHz band + */ + if (info->band == IEEE80211_BAND_2GHZ) + mac_index += IWL_FIRST_OFDM_RATE; + } + /* Here we actually compare this rate to the latest LQ command */ + if ((mac_index < 0) || + (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) || + (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || + (tbl_type.ant_type != info->status.antenna) || + (!!(tx_rate & RATE_MCS_HT_MSK) != + !!(mac_flags & IEEE80211_TX_RC_MCS)) || + (!!(tx_rate & RATE_HT_MCS_GF_MSK) != + !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) || + (rs_index != mac_index)) { + IWL_DEBUG_RATE(mvm, + "initial rate %d does not match %d (0x%x)\n", + mac_index, rs_index, tx_rate); + /* + * Since rates mis-match, the last LQ command may have failed. + * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with + * ... driver. + */ + lq_sta->missed_rate_counter++; + if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) { + lq_sta->missed_rate_counter = 0; + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_ASYNC, false); + } + /* Regardless, ignore this status info for outdated rate */ + return; + } else + /* Rate did match, so reset the missed_rate_counter */ + lq_sta->missed_rate_counter = 0; + + /* Figure out if rate scale algorithm is in active or search table */ + if (table_type_matches(&tbl_type, + &(lq_sta->lq_info[lq_sta->active_tbl]))) { + curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + } else if (table_type_matches( + &tbl_type, &lq_sta->lq_info[1 - lq_sta->active_tbl])) { + curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + } else { + IWL_DEBUG_RATE(mvm, + "Neither active nor search matches tx rate\n"); + tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + IWL_DEBUG_RATE(mvm, "active- lq:%x, ant:%x, SGI:%d\n", + tmp_tbl->lq_type, tmp_tbl->ant_type, + tmp_tbl->is_SGI); + tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + IWL_DEBUG_RATE(mvm, "search- lq:%x, ant:%x, SGI:%d\n", + tmp_tbl->lq_type, tmp_tbl->ant_type, + tmp_tbl->is_SGI); + IWL_DEBUG_RATE(mvm, "actual- lq:%x, ant:%x, SGI:%d\n", + tbl_type.lq_type, tbl_type.ant_type, + tbl_type.is_SGI); + /* + * no matching table found, let's by-pass the data collection + * and continue to perform rate scale to find the rate table + */ + rs_stay_in_table(lq_sta, true); + goto done; + } + + /* + * Updating the frame history depends on whether packets were + * aggregated. + * + * For aggregation, all packets were transmitted at the same rate, the + * first index into rate scale table. + */ + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + tx_rate = le32_to_cpu(table->rs_table[0]); + rs_get_tbl_info_from_mcs(tx_rate, info->band, &tbl_type, + &rs_index); + rs_collect_tx_data(curr_tbl, rs_index, + info->status.ampdu_len, + info->status.ampdu_ack_len); + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->stay_in_tbl) { + lq_sta->total_success += info->status.ampdu_ack_len; + lq_sta->total_failed += (info->status.ampdu_len - + info->status.ampdu_ack_len); + } + } else { + /* + * For legacy, update frame history with for each Tx retry. + */ + retries = info->status.rates[0].count - 1; + /* HW doesn't send more than 15 retries */ + retries = min(retries, 15); + + /* The last transmission may have been successful */ + legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); + /* Collect data for each rate used during failed TX attempts */ + for (i = 0; i <= retries; ++i) { + tx_rate = le32_to_cpu(table->rs_table[i]); + rs_get_tbl_info_from_mcs(tx_rate, info->band, + &tbl_type, &rs_index); + /* + * Only collect stats if retried rate is in the same RS + * table as active/search. + */ + if (table_type_matches(&tbl_type, curr_tbl)) + tmp_tbl = curr_tbl; + else if (table_type_matches(&tbl_type, other_tbl)) + tmp_tbl = other_tbl; + else + continue; + rs_collect_tx_data(tmp_tbl, rs_index, 1, + i < retries ? 0 : legacy_success); + } + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->stay_in_tbl) { + lq_sta->total_success += legacy_success; + lq_sta->total_failed += retries + (1 - legacy_success); + } + } + /* The last TX rate is cached in lq_sta; it's set in if/else above */ + lq_sta->last_rate_n_flags = tx_rate; +done: + /* See if there's a better rate or modulation mode to try. */ + if (sta && sta->supp_rates[sband->band]) + rs_rate_scale_perform(mvm, skb, sta, lq_sta); +} + +/* + * Begin a period of staying with a selected modulation mode. + * Set "stay_in_tbl" flag to prevent any mode switches. + * Set frame tx success limits according to legacy vs. high-throughput, + * and reset overall (spanning all rates) tx success history statistics. + * These control how long we stay using same modulation mode before + * searching for a new mode. + */ +static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy, + struct iwl_lq_sta *lq_sta) +{ + IWL_DEBUG_RATE(mvm, "we are staying in the same table\n"); + lq_sta->stay_in_tbl = 1; /* only place this gets set */ + if (is_legacy) { + lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; + } else { + lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; + } + lq_sta->table_count = 0; + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = jiffies; + lq_sta->action_counter = 0; +} + +/* + * Find correct throughput table for given mode of modulation + */ +static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl) +{ + /* Used to choose among HT tables */ + s32 (*ht_tbl_pointer)[IWL_RATE_COUNT]; + + /* Check for invalid LQ type */ + if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) { + tbl->expected_tpt = expected_tpt_legacy; + return; + } + + /* Legacy rates have only one table */ + if (is_legacy(tbl->lq_type)) { + tbl->expected_tpt = expected_tpt_legacy; + return; + } + + /* Choose among many HT tables depending on number of streams + * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation + * status */ + if (is_siso(tbl->lq_type) && !tbl->is_ht40) + ht_tbl_pointer = expected_tpt_siso20MHz; + else if (is_siso(tbl->lq_type)) + ht_tbl_pointer = expected_tpt_siso40MHz; + else if (is_mimo2(tbl->lq_type) && !tbl->is_ht40) + ht_tbl_pointer = expected_tpt_mimo2_20MHz; + else if (is_mimo2(tbl->lq_type)) + ht_tbl_pointer = expected_tpt_mimo2_40MHz; + else if (is_mimo3(tbl->lq_type) && !tbl->is_ht40) + ht_tbl_pointer = expected_tpt_mimo3_20MHz; + else /* if (is_mimo3(tbl->lq_type)) <-- must be true */ + ht_tbl_pointer = expected_tpt_mimo3_40MHz; + + if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ + tbl->expected_tpt = ht_tbl_pointer[0]; + else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */ + tbl->expected_tpt = ht_tbl_pointer[1]; + else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */ + tbl->expected_tpt = ht_tbl_pointer[2]; + else /* AGG+SGI */ + tbl->expected_tpt = ht_tbl_pointer[3]; +} + +/* + * Find starting rate for new "search" high-throughput mode of modulation. + * Goal is to find lowest expected rate (under perfect conditions) that is + * above the current measured throughput of "active" mode, to give new mode + * a fair chance to prove itself without too many challenges. + * + * This gets called when transitioning to more aggressive modulation + * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive + * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need + * to decrease to match "active" throughput. When moving from MIMO to SISO, + * bit rate will typically need to increase, but not if performance was bad. + */ +static s32 rs_get_best_rate(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, /* "search" */ + u16 rate_mask, s8 index) +{ + /* "active" values */ + struct iwl_scale_tbl_info *active_tbl = + &(lq_sta->lq_info[lq_sta->active_tbl]); + s32 active_sr = active_tbl->win[index].success_ratio; + s32 active_tpt = active_tbl->expected_tpt[index]; + + /* expected "search" throughput */ + s32 *tpt_tbl = tbl->expected_tpt; + + s32 new_rate, high, low, start_hi; + u16 high_low; + s8 rate = index; + + new_rate = high = low = start_hi = IWL_RATE_INVALID; + + while (1) { + high_low = rs_get_adjacent_rate(mvm, rate, rate_mask, + tbl->lq_type); + + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* + * Lower the "search" bit rate, to give new "search" mode + * approximately the same throughput as "active" if: + * + * 1) "Active" mode has been working modestly well (but not + * great), and expected "search" throughput (under perfect + * conditions) at candidate rate is above the actual + * measured "active" throughput (but less than expected + * "active" throughput under perfect conditions). + * OR + * 2) "Active" mode has been working perfectly or very well + * and expected "search" throughput (under perfect + * conditions) at candidate rate is above expected + * "active" throughput (under perfect conditions). + */ + if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && + ((active_sr > IWL_RATE_DECREASE_TH) && + (active_sr <= IWL_RATE_HIGH_TH) && + (tpt_tbl[rate] <= active_tpt))) || + ((active_sr >= IWL_RATE_SCALE_SWITCH) && + (tpt_tbl[rate] > active_tpt))) { + /* (2nd or later pass) + * If we've already tried to raise the rate, and are + * now trying to lower it, use the higher rate. */ + if (start_hi != IWL_RATE_INVALID) { + new_rate = start_hi; + break; + } + + new_rate = rate; + + /* Loop again with lower rate */ + if (low != IWL_RATE_INVALID) + rate = low; + + /* Lower rate not available, use the original */ + else + break; + + /* Else try to raise the "search" rate to match "active" */ + } else { + /* (2nd or later pass) + * If we've already tried to lower the rate, and are + * now trying to raise it, use the lower rate. */ + if (new_rate != IWL_RATE_INVALID) + break; + + /* Loop again with higher rate */ + else if (high != IWL_RATE_INVALID) { + start_hi = high; + rate = high; + + /* Higher rate not available, use the original */ + } else { + new_rate = rate; + break; + } + } + } + + return new_rate; +} + +static bool iwl_is_ht40_tx_allowed(struct iwl_mvm *mvm, + struct ieee80211_sta_ht_cap *ht_cap) +{ + /* + * Remainder of this function checks ht_cap, but if it's + * NULL then we can do HT40 (special case for RXON) + */ + if (!ht_cap) + return true; + + if (!ht_cap->ht_supported) + return false; + + if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + return false; + + return true; +} + +/* + * Set up search table for MIMO2 + */ +static int rs_switch_to_mimo2(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + + if (!sta->ht_cap.ht_supported) + return -1; + + if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) + == WLAN_HT_CAP_SM_PS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (num_of_ant(mvm->nvm_data->valid_tx_ant) < 2) + return -1; + + IWL_DEBUG_RATE(mvm, "LQ: try to switch to MIMO2\n"); + + tbl->lq_type = LQ_MIMO2; + tbl->action = 0; + tbl->max_search = IWL_MAX_SEARCH; + rate_mask = lq_sta->active_mimo2_rate; + + if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + rs_set_expected_tpt_table(lq_sta, tbl); + + rate = rs_get_best_rate(mvm, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE(mvm, "LQ: MIMO2 best rate %d mask %X\n", + rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE(mvm, "Can't switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, rate, is_green); + + IWL_DEBUG_RATE(mvm, "LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Set up search table for MIMO3 + */ +static int rs_switch_to_mimo3(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + + if (!sta->ht_cap.ht_supported) + return -1; + + if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) + == WLAN_HT_CAP_SM_PS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (num_of_ant(mvm->nvm_data->valid_tx_ant) < 3) + return -1; + + IWL_DEBUG_RATE(mvm, "LQ: try to switch to MIMO3\n"); + + tbl->lq_type = LQ_MIMO3; + tbl->action = 0; + tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; + rate_mask = lq_sta->active_mimo3_rate; + + if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + rs_set_expected_tpt_table(lq_sta, tbl); + + rate = rs_get_best_rate(mvm, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE(mvm, "LQ: MIMO3 best rate %d mask %X\n", + rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE(mvm, "Can't switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, rate, is_green); + + IWL_DEBUG_RATE(mvm, "LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Set up search table for SISO + */ +static int rs_switch_to_siso(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + u8 is_green = lq_sta->is_green; + s32 rate; + + if (!sta->ht_cap.ht_supported) + return -1; + + IWL_DEBUG_RATE(mvm, "LQ: try to switch to SISO\n"); + + tbl->lq_type = LQ_SISO; + tbl->action = 0; + tbl->max_search = IWL_MAX_SEARCH; + rate_mask = lq_sta->active_siso_rate; + + if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + if (is_green) + tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ + + rs_set_expected_tpt_table(lq_sta, tbl); + rate = rs_get_best_rate(mvm, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE(mvm, "LQ: get best rate %d mask %X\n", rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE(mvm, + "can not switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, rate, is_green); + IWL_DEBUG_RATE(mvm, "LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Try to switch to new modulation mode from legacy + */ +static int rs_move_legacy_other(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, + int index) +{ + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = mvm->nvm_data->valid_tx_ant; + u8 tx_chains_num = num_of_ant(valid_tx_ant); + int ret; + u8 update_search_tbl_counter = 0; + + start_action = tbl->action; + while (1) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_LEGACY_SWITCH_ANTENNA1: + case IWL_LEGACY_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(mvm, "LQ: Legacy toggle Antenna\n"); + + if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + + /* Don't change antenna if success has been great */ + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + /* Set up search table to try other antenna */ + memcpy(search_tbl, tbl, sz); + + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, + search_tbl)) { + update_search_tbl_counter = 1; + rs_set_expected_tpt_table(lq_sta, search_tbl); + goto out; + } + break; + case IWL_LEGACY_SWITCH_SISO: + IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to SISO\n"); + + /* Set up search table to try SISO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + ret = rs_switch_to_siso(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + + break; + case IWL_LEGACY_SWITCH_MIMO2_AB: + case IWL_LEGACY_SWITCH_MIMO2_AC: + case IWL_LEGACY_SWITCH_MIMO2_BC: + IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to MIMO2\n"); + + /* Set up search table to try MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo2(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + break; + + case IWL_LEGACY_SWITCH_MIMO3_ABC: + IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to MIMO3\n"); + + /* Set up search table to try MIMO3 */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + search_tbl->ant_type = ANT_ABC; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo3(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + break; + } + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + +out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + return 0; +} + +/* + * Try to switch to new modulation mode from SISO + */ +static int rs_move_siso_to_other(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, int index) +{ + u8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = mvm->nvm_data->valid_tx_ant; + u8 tx_chains_num = num_of_ant(valid_tx_ant); + u8 update_search_tbl_counter = 0; + int ret; + + start_action = tbl->action; + while (1) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_SISO_SWITCH_ANTENNA1: + case IWL_SISO_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(mvm, "LQ: SISO toggle Antenna\n"); + if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IWL_SISO_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, + search_tbl)) { + update_search_tbl_counter = 1; + goto out; + } + break; + case IWL_SISO_SWITCH_MIMO2_AB: + case IWL_SISO_SWITCH_MIMO2_AC: + case IWL_SISO_SWITCH_MIMO2_BC: + IWL_DEBUG_RATE(mvm, "LQ: SISO switch to MIMO2\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo2(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) + goto out; + break; + case IWL_SISO_SWITCH_GI: + if (!tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_40)) + break; + + IWL_DEBUG_RATE(mvm, "LQ: SISO toggle SGI/NGI\n"); + + memcpy(search_tbl, tbl, sz); + if (is_green) { + if (!tbl->is_SGI) + break; + else + IWL_ERR(mvm, + "SGI was set in GF+SISO\n"); + } + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = + rate_n_flags_from_tbl(mvm, search_tbl, + index, is_green); + update_search_tbl_counter = 1; + goto out; + case IWL_SISO_SWITCH_MIMO3_ABC: + IWL_DEBUG_RATE(mvm, "LQ: SISO switch to MIMO3\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_ABC; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo3(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) + goto out; + break; + } + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + + out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC) + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; +} + +/* + * Try to switch to new modulation mode from MIMO2 + */ +static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, int index) +{ + s8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = mvm->nvm_data->valid_tx_ant; + u8 tx_chains_num = num_of_ant(valid_tx_ant); + u8 update_search_tbl_counter = 0; + int ret; + + start_action = tbl->action; + while (1) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_MIMO2_SWITCH_ANTENNA1: + case IWL_MIMO2_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(mvm, "LQ: MIMO2 toggle Antennas\n"); + + if (tx_chains_num <= 2) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, + search_tbl)) { + update_search_tbl_counter = 1; + goto out; + } + break; + case IWL_MIMO2_SWITCH_SISO_A: + case IWL_MIMO2_SWITCH_SISO_B: + case IWL_MIMO2_SWITCH_SISO_C: + IWL_DEBUG_RATE(mvm, "LQ: MIMO2 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) + search_tbl->ant_type = ANT_A; + else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) + search_tbl->ant_type = ANT_B; + else + search_tbl->ant_type = ANT_C; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_siso(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + + case IWL_MIMO2_SWITCH_GI: + if (!tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_40)) + break; + + IWL_DEBUG_RATE(mvm, "LQ: MIMO2 toggle SGI/NGI\n"); + + /* Set up new search table for MIMO2 */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = + rate_n_flags_from_tbl(mvm, search_tbl, + index, is_green); + update_search_tbl_counter = 1; + goto out; + + case IWL_MIMO2_SWITCH_MIMO3_ABC: + IWL_DEBUG_RATE(mvm, "LQ: MIMO2 switch to MIMO3\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_ABC; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo3(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + } + tbl->action++; + if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) + tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) + tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; +} + +/* + * Try to switch to new modulation mode from MIMO3 + */ +static int rs_move_mimo3_to_other(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct ieee80211_sta *sta, int index) +{ + s8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = mvm->nvm_data->valid_tx_ant; + u8 tx_chains_num = num_of_ant(valid_tx_ant); + int ret; + u8 update_search_tbl_counter = 0; + + start_action = tbl->action; + while (1) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_MIMO3_SWITCH_ANTENNA1: + case IWL_MIMO3_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(mvm, "LQ: MIMO3 toggle Antennas\n"); + + if (tx_chains_num <= 3) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, + search_tbl)) + goto out; + break; + case IWL_MIMO3_SWITCH_SISO_A: + case IWL_MIMO3_SWITCH_SISO_B: + case IWL_MIMO3_SWITCH_SISO_C: + IWL_DEBUG_RATE(mvm, "LQ: MIMO3 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + if (tbl->action == IWL_MIMO3_SWITCH_SISO_A) + search_tbl->ant_type = ANT_A; + else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B) + search_tbl->ant_type = ANT_B; + else + search_tbl->ant_type = ANT_C; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_siso(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + + case IWL_MIMO3_SWITCH_MIMO2_AB: + case IWL_MIMO3_SWITCH_MIMO2_AC: + case IWL_MIMO3_SWITCH_MIMO2_BC: + IWL_DEBUG_RATE(mvm, "LQ: MIMO3 switch to MIMO2\n"); + + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, + search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo2(mvm, lq_sta, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + + case IWL_MIMO3_SWITCH_GI: + if (!tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_40)) + break; + + IWL_DEBUG_RATE(mvm, "LQ: MIMO3 toggle SGI/NGI\n"); + + /* Set up new search table for MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = + rate_n_flags_from_tbl(mvm, search_tbl, + index, is_green); + update_search_tbl_counter = 1; + goto out; + } + tbl->action++; + if (tbl->action > IWL_MIMO3_SWITCH_GI) + tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_MIMO3_SWITCH_GI) + tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; +} + +/* + * Check whether we should continue using same modulation mode, or + * begin search for a new mode, based on: + * 1) # tx successes or failures while using this mode + * 2) # times calling this function + * 3) elapsed time in this mode (not used, for now) + */ +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) +{ + struct iwl_scale_tbl_info *tbl; + int i; + int active_tbl; + int flush_interval_passed = 0; + struct iwl_mvm *mvm; + + mvm = lq_sta->drv; + active_tbl = lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + /* If we've been disallowing search, see if we should now allow it */ + if (lq_sta->stay_in_tbl) { + /* Elapsed time using current modulation mode */ + if (lq_sta->flush_timer) + flush_interval_passed = + time_after(jiffies, + (unsigned long)(lq_sta->flush_timer + + IWL_RATE_SCALE_FLUSH_INTVL)); + + /* + * Check if we should allow search for new modulation mode. + * If many frames have failed or succeeded, or we've used + * this same modulation for a long time, allow search, and + * reset history stats that keep track of whether we should + * allow a new search. Also (below) reset all bitmaps and + * stats in active history. + */ + if (force_search || + (lq_sta->total_failed > lq_sta->max_failure_limit) || + (lq_sta->total_success > lq_sta->max_success_limit) || + ((!lq_sta->search_better_tbl) && + (lq_sta->flush_timer) && (flush_interval_passed))) { + IWL_DEBUG_RATE(mvm, + "LQ: stay is expired %d %d %d\n", + lq_sta->total_failed, + lq_sta->total_success, + flush_interval_passed); + + /* Allow search for new mode */ + lq_sta->stay_in_tbl = 0; /* only place reset */ + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = 0; + /* + * Else if we've used this modulation mode enough repetitions + * (regardless of elapsed time or success/failure), reset + * history bitmaps and rate-specific stats for all rates in + * active table. + */ + } else { + lq_sta->table_count++; + if (lq_sta->table_count >= + lq_sta->table_count_limit) { + lq_sta->table_count = 0; + + IWL_DEBUG_RATE(mvm, + "LQ: stay in table clear win\n"); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window( + &(tbl->win[i])); + } + } + + /* If transitioning to allow "search", reset all history + * bitmaps and stats in active table (this will become the new + * "search" table). */ + if (!lq_sta->stay_in_tbl) { + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + } + } +} + +/* + * setup rate table in uCode + */ +static void rs_update_rate_tbl(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + int index, u8 is_green) +{ + u32 rate; + + /* Update uCode's rate table. */ + rate = rate_n_flags_from_tbl(mvm, tbl, index, is_green); + rs_fill_link_cmd(mvm, lq_sta, rate); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_ASYNC, false); +} + +/* + * Do rate scaling and search for new modulation mode. + */ +static void rs_rate_scale_perform(struct iwl_mvm *mvm, + struct sk_buff *skb, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + int low = IWL_RATE_INVALID; + int high = IWL_RATE_INVALID; + int index; + int i; + struct iwl_rate_scale_data *window = NULL; + int current_tpt = IWL_INVALID_VALUE; + int low_tpt = IWL_INVALID_VALUE; + int high_tpt = IWL_INVALID_VALUE; + u32 fail_count; + s8 scale_action = 0; + u16 rate_mask; + u8 update_lq = 0; + struct iwl_scale_tbl_info *tbl, *tbl1; + u16 rate_scale_index_msk = 0; + u8 is_green = 0; + u8 active_tbl = 0; + u8 done_search = 0; + u16 high_low; + s32 sr; + u8 tid = IWL_MAX_TID_COUNT; + struct iwl_mvm_sta *sta_priv = (void *)sta->drv_priv; + struct iwl_mvm_tid_data *tid_data; + + IWL_DEBUG_RATE(mvm, "rate scale calculate new rate for skb\n"); + + /* Send management frames and NO_ACK data using lowest rate. */ + /* TODO: this could probably be improved.. */ + if (!ieee80211_is_data(hdr->frame_control) || + info->flags & IEEE80211_TX_CTL_NO_ACK) + return; + + lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; + + tid = rs_tl_add_packet(lq_sta, hdr); + if ((tid != IWL_MAX_TID_COUNT) && + (lq_sta->tx_agg_tid_en & (1 << tid))) { + tid_data = &sta_priv->tid_data[tid]; + if (tid_data->state == IWL_AGG_OFF) + lq_sta->is_agg = 0; + else + lq_sta->is_agg = 1; + } else { + lq_sta->is_agg = 0; + } + + /* + * Select rate-scale / modulation-mode table to work with in + * the rest of this function: "search" if searching for better + * modulation mode, or "active" if doing rate scaling within a mode. + */ + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + if (is_legacy(tbl->lq_type)) + lq_sta->is_green = 0; + else + lq_sta->is_green = rs_use_green(sta); + is_green = lq_sta->is_green; + + /* current tx rate */ + index = lq_sta->last_txrate_idx; + + IWL_DEBUG_RATE(mvm, "Rate scale index %d for type %d\n", index, + tbl->lq_type); + + /* rates available for this association, and for modulation mode */ + rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); + + IWL_DEBUG_RATE(mvm, "mask 0x%04X\n", rate_mask); + + /* mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + /* supp_rates has no CCK bits in A mode */ + rate_scale_index_msk = (u16) (rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_scale_index_msk = (u16) (rate_mask & + lq_sta->supp_rates); + + } else { + rate_scale_index_msk = rate_mask; + } + + if (!rate_scale_index_msk) + rate_scale_index_msk = rate_mask; + + if (!((1 << index) & rate_scale_index_msk)) { + IWL_ERR(mvm, "Current Rate is not valid\n"); + if (lq_sta->search_better_tbl) { + /* revert to active table if search table is not valid*/ + tbl->lq_type = LQ_NONE; + lq_sta->search_better_tbl = 0; + tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + /* get "active" rate info */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + rs_update_rate_tbl(mvm, lq_sta, tbl, index, is_green); + } + return; + } + + /* Get expected throughput table and history window for current rate */ + if (!tbl->expected_tpt) { + IWL_ERR(mvm, "tbl->expected_tpt is NULL\n"); + return; + } + + /* force user max rate if set by user */ + if ((lq_sta->max_rate_idx != -1) && + (lq_sta->max_rate_idx < index)) { + index = lq_sta->max_rate_idx; + update_lq = 1; + window = &(tbl->win[index]); + goto lq_update; + } + + window = &(tbl->win[index]); + + /* + * If there is not enough history to calculate actual average + * throughput, keep analyzing results of more tx frames, without + * changing rate or mode (bypass most of the rest of this function). + * Set up new rate table in uCode only if old rate is not supported + * in current association (use new rate found above). + */ + fail_count = window->counter - window->success_counter; + if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && + (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { + IWL_DEBUG_RATE(mvm, + "LQ: still below TH. succ=%d total=%d for index %d\n", + window->success_counter, window->counter, index); + + /* Can't calculate this yet; not enough history */ + window->average_tpt = IWL_INVALID_VALUE; + + /* Should we stay with this modulation mode, + * or search for a new one? */ + rs_stay_in_table(lq_sta, false); + + goto out; + } + /* Else we have enough samples; calculate estimate of + * actual average throughput */ + if (window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)) { + IWL_ERR(mvm, + "expected_tpt should have been calculated by now\n"); + window->average_tpt = ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128); + } + + /* If we are searching for better modulation mode, check success. */ + if (lq_sta->search_better_tbl) { + /* If good success, continue using the "search" mode; + * no need to send new link quality command, since we're + * continuing to use the setup that we've been trying. */ + if (window->average_tpt > lq_sta->last_tpt) { + IWL_DEBUG_RATE(mvm, + "LQ: SWITCHING TO NEW TABLE suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + if (!is_legacy(tbl->lq_type)) + lq_sta->enable_counter = 1; + + /* Swap tables; "search" becomes "active" */ + lq_sta->active_tbl = active_tbl; + current_tpt = window->average_tpt; + /* Else poor success; go back to mode in "active" table */ + } else { + IWL_DEBUG_RATE(mvm, + "LQ: GOING BACK TO THE OLD TABLE suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + /* Nullify "search" table */ + tbl->lq_type = LQ_NONE; + + /* Revert to "active" table */ + active_tbl = lq_sta->active_tbl; + tbl = &(lq_sta->lq_info[active_tbl]); + + /* Revert to "active" rate and throughput info */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + current_tpt = lq_sta->last_tpt; + + /* Need to set up a new rate table in uCode */ + update_lq = 1; + } + + /* Either way, we've made a decision; modulation mode + * search is done, allow rate adjustment next time. */ + lq_sta->search_better_tbl = 0; + done_search = 1; /* Don't switch modes below! */ + goto lq_update; + } + + /* (Else) not in search of better modulation mode, try for better + * starting rate, while staying in this mode. */ + high_low = rs_get_adjacent_rate(mvm, index, rate_scale_index_msk, + tbl->lq_type); + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* If user set max rate, dont allow higher than user constrain */ + if ((lq_sta->max_rate_idx != -1) && + (lq_sta->max_rate_idx < high)) + high = IWL_RATE_INVALID; + + sr = window->success_ratio; + + /* Collect measured throughputs for current and adjacent rates */ + current_tpt = window->average_tpt; + if (low != IWL_RATE_INVALID) + low_tpt = tbl->win[low].average_tpt; + if (high != IWL_RATE_INVALID) + high_tpt = tbl->win[high].average_tpt; + + scale_action = 0; + + /* Too many failures, decrease rate */ + if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { + IWL_DEBUG_RATE(mvm, + "decrease rate because of low success_ratio\n"); + scale_action = -1; + /* No throughput measured yet for adjacent rates; try increase. */ + } else if ((low_tpt == IWL_INVALID_VALUE) && + (high_tpt == IWL_INVALID_VALUE)) { + if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) + scale_action = 1; + else if (low != IWL_RATE_INVALID) + scale_action = 0; + } + + /* Both adjacent throughputs are measured, but neither one has better + * throughput; we're using the best rate, don't change it! */ + else if ((low_tpt != IWL_INVALID_VALUE) && + (high_tpt != IWL_INVALID_VALUE) && + (low_tpt < current_tpt) && + (high_tpt < current_tpt)) + scale_action = 0; + + /* At least one adjacent rate's throughput is measured, + * and may have better performance. */ + else { + /* Higher adjacent rate's throughput is measured */ + if (high_tpt != IWL_INVALID_VALUE) { + /* Higher rate has better throughput */ + if (high_tpt > current_tpt && + sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } else { + scale_action = 0; + } + + /* Lower adjacent rate's throughput is measured */ + } else if (low_tpt != IWL_INVALID_VALUE) { + /* Lower rate has better throughput */ + if (low_tpt > current_tpt) { + IWL_DEBUG_RATE(mvm, + "decrease rate because of low tpt\n"); + scale_action = -1; + } else if (sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } + } + } + + /* Sanity check; asked for decrease, but success rate or throughput + * has been good at old rate. Don't change it. */ + if ((scale_action == -1) && (low != IWL_RATE_INVALID) && + ((sr > IWL_RATE_HIGH_TH) || + (current_tpt > (100 * tbl->expected_tpt[low])))) + scale_action = 0; + + switch (scale_action) { + case -1: + /* Decrease starting rate, update uCode's rate table */ + if (low != IWL_RATE_INVALID) { + update_lq = 1; + index = low; + } + + break; + case 1: + /* Increase starting rate, update uCode's rate table */ + if (high != IWL_RATE_INVALID) { + update_lq = 1; + index = high; + } + + break; + case 0: + /* No change */ + default: + break; + } + + IWL_DEBUG_RATE(mvm, + "choose rate scale index %d action %d low %d high %d type %d\n", + index, scale_action, low, high, tbl->lq_type); + +lq_update: + /* Replace uCode's rate table for the destination station. */ + if (update_lq) + rs_update_rate_tbl(mvm, lq_sta, tbl, index, is_green); + + rs_stay_in_table(lq_sta, false); + + /* + * Search for new modulation mode if we're: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) Allowing a new search + */ + if (!update_lq && !done_search && + !lq_sta->stay_in_tbl && window->counter) { + /* Save current throughput to compare with "search" throughput*/ + lq_sta->last_tpt = current_tpt; + + /* Select a new "search" modulation mode to try. + * If one is found, set up the new "search" table. */ + if (is_legacy(tbl->lq_type)) + rs_move_legacy_other(mvm, lq_sta, sta, index); + else if (is_siso(tbl->lq_type)) + rs_move_siso_to_other(mvm, lq_sta, sta, index); + else if (is_mimo2(tbl->lq_type)) + rs_move_mimo2_to_other(mvm, lq_sta, sta, index); + else + rs_move_mimo3_to_other(mvm, lq_sta, sta, index); + + /* If new "search" mode was selected, set up in uCode table */ + if (lq_sta->search_better_tbl) { + /* Access the "search" table, clear its history. */ + tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + + /* Use new "search" start rate */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + + IWL_DEBUG_RATE(mvm, + "Switch current mcs: %X index: %d\n", + tbl->current_rate, index); + rs_fill_link_cmd(mvm, lq_sta, tbl->current_rate); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_ASYNC, false); + } else { + done_search = 1; + } + } + + if (done_search && !lq_sta->stay_in_tbl) { + /* If the "active" (non-search) mode was legacy, + * and we've tried switching antennas, + * but we haven't been able to try HT modes (not available), + * stay with best antenna legacy modulation for a while + * before next round of mode comparisons. */ + tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); + if (is_legacy(tbl1->lq_type) && !sta->ht_cap.ht_supported && + lq_sta->action_counter > tbl1->max_search) { + IWL_DEBUG_RATE(mvm, "LQ: STAY in legacy table\n"); + rs_set_stay_in_table(mvm, 1, lq_sta); + } + + /* If we're in an HT mode, and all 3 mode switch actions + * have been tried and compared, stay in this best modulation + * mode for a while before next round of mode comparisons. */ + if (lq_sta->enable_counter && + (lq_sta->action_counter >= tbl1->max_search)) { + if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && + (lq_sta->tx_agg_tid_en & (1 << tid)) && + (tid != IWL_MAX_TID_COUNT)) { + tid_data = &sta_priv->tid_data[tid]; + if (tid_data->state == IWL_AGG_OFF) { + IWL_DEBUG_RATE(mvm, + "try to aggregate tid %d\n", + tid); + rs_tl_turn_on_agg(mvm, tid, + lq_sta, sta); + } + } + rs_set_stay_in_table(mvm, 0, lq_sta); + } + } + +out: + tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, index, is_green); + lq_sta->last_txrate_idx = index; +} + +/** + * rs_initialize_lq - Initialize a station's hardware rate table + * + * The uCode's station table contains a table of fallback rates + * for automatic fallback during transmission. + * + * NOTE: This sets up a default set of values. These will be replaced later + * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of + * rc80211_simple. + * + * NOTE: Run REPLY_ADD_STA command to set up station table entry, before + * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, + * which requires station table entry to exist). + */ +static void rs_initialize_lq(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta, + enum ieee80211_band band) +{ + struct iwl_scale_tbl_info *tbl; + int rate_idx; + int i; + u32 rate; + u8 use_green = rs_use_green(sta); + u8 active_tbl = 0; + u8 valid_tx_ant; + + if (!sta || !lq_sta) + return; + + i = lq_sta->last_txrate_idx; + + valid_tx_ant = mvm->nvm_data->valid_tx_ant; + + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + if ((i < 0) || (i >= IWL_RATE_COUNT)) + i = 0; + + rate = iwl_rates[i].plcp; + tbl->ant_type = first_antenna(valid_tx_ant); + rate |= tbl->ant_type << RATE_MCS_ANT_POS; + + if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) + rate |= RATE_MCS_CCK_MSK; + + rs_get_tbl_info_from_mcs(rate, band, tbl, &rate_idx); + if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) + rs_toggle_antenna(valid_tx_ant, &rate, tbl); + + rate = rate_n_flags_from_tbl(mvm, tbl, rate_idx, use_green); + tbl->current_rate = rate; + rs_set_expected_tpt_table(lq_sta, tbl); + rs_fill_link_cmd(NULL, lq_sta, rate); + /* TODO restore station should remember the lq cmd */ + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_SYNC, true); +} + +static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, + struct ieee80211_tx_rate_control *txrc) +{ + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; + struct iwl_op_mode *op_mode __maybe_unused = + (struct iwl_op_mode *)mvm_r; + struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_lq_sta *lq_sta = mvm_sta; + int rate_idx; + + IWL_DEBUG_RATE_LIMIT(mvm, "rate scale calculate new rate for skb\n"); + + /* Get max rate if user set max rate */ + if (lq_sta) { + lq_sta->max_rate_idx = txrc->max_rate_idx; + if ((sband->band == IEEE80211_BAND_5GHZ) && + (lq_sta->max_rate_idx != -1)) + lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE; + if ((lq_sta->max_rate_idx < 0) || + (lq_sta->max_rate_idx >= IWL_RATE_COUNT)) + lq_sta->max_rate_idx = -1; + } + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (lq_sta && !lq_sta->drv) { + IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); + mvm_sta = NULL; + } + + /* Send management frames and NO_ACK data using lowest rate. */ + if (rate_control_send_low(sta, mvm_sta, txrc)) + return; + + rate_idx = lq_sta->last_txrate_idx; + + if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) { + rate_idx -= IWL_FIRST_OFDM_RATE; + /* 6M and 9M shared same MCS index */ + rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; + if (rs_extract_rate(lq_sta->last_rate_n_flags) >= + IWL_RATE_MIMO3_6M_PLCP) + rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM); + else if (rs_extract_rate(lq_sta->last_rate_n_flags) >= + IWL_RATE_MIMO2_6M_PLCP) + rate_idx = rate_idx + MCS_INDEX_PER_STREAM; + info->control.rates[0].flags = IEEE80211_TX_RC_MCS; + if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) + info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI; + if (lq_sta->last_rate_n_flags & RATE_MCS_CHAN_WIDTH_40) /* TODO */ + info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + if (lq_sta->last_rate_n_flags & RATE_HT_MCS_GF_MSK) + info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD; + } else { + /* Check for invalid rates */ + if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) || + ((sband->band == IEEE80211_BAND_5GHZ) && + (rate_idx < IWL_FIRST_OFDM_RATE))) + rate_idx = rate_lowest_index(sband, sta); + /* On valid 5 GHz rate, adjust index */ + else if (sband->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; + info->control.rates[0].flags = 0; + } + info->control.rates[0].idx = rate_idx; +} + +static void *rs_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta, + gfp_t gfp) +{ + struct iwl_mvm_sta *sta_priv = (struct iwl_mvm_sta *)sta->drv_priv; + struct iwl_op_mode *op_mode __maybe_unused = + (struct iwl_op_mode *)mvm_rate; + struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); + + IWL_DEBUG_RATE(mvm, "create station rate scale window\n"); + + return &sta_priv->lq_sta; +} + +/* + * Called after adding a new station to initialize rate scaling + */ +void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + enum ieee80211_band band) +{ + int i, j; + struct ieee80211_hw *hw = mvm->hw; + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + struct iwl_mvm_sta *sta_priv; + struct iwl_lq_sta *lq_sta; + struct ieee80211_supported_band *sband; + unsigned long supp; /* must be unsigned long for for_each_set_bit */ + + sta_priv = (struct iwl_mvm_sta *)sta->drv_priv; + lq_sta = &sta_priv->lq_sta; + sband = hw->wiphy->bands[band]; + + lq_sta->lq.sta_id = sta_priv->sta_id; + + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + + lq_sta->flush_timer = 0; + lq_sta->supp_rates = sta->supp_rates[sband->band]; + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + + IWL_DEBUG_RATE(mvm, + "LQ: *** rate scale station global init for station %d ***\n", + sta_priv->sta_id); + /* TODO: what is a good starting rate for STA? About middle? Maybe not + * the lowest or the highest rate.. Could consider using RSSI from + * previous packets? Need to have IEEE 802.1X auth succeed immediately + * after assoc.. */ + + lq_sta->max_rate_idx = -1; + lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX; + lq_sta->is_green = rs_use_green(sta); + lq_sta->band = sband->band; + /* + * active legacy rates as per supported rates bitmap + */ + supp = sta->supp_rates[sband->band]; + lq_sta->active_legacy_rate = 0; + for_each_set_bit(i, &supp, BITS_PER_LONG) + lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value); + + /* + * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), + * supp_rates[] does not; shift to convert format, force 9 MBits off. + */ + lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; + lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; + lq_sta->active_siso_rate &= ~((u16)0x2); + lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; + + /* Same here */ + lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; + lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; + lq_sta->active_mimo2_rate &= ~((u16)0x2); + lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; + + lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1; + lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1; + lq_sta->active_mimo3_rate &= ~((u16)0x2); + lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; + + IWL_DEBUG_RATE(mvm, + "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", + lq_sta->active_siso_rate, + lq_sta->active_mimo2_rate, + lq_sta->active_mimo3_rate); + + /* These values will be overridden later */ + lq_sta->lq.single_stream_ant_msk = + first_antenna(mvm->nvm_data->valid_tx_ant); + lq_sta->lq.dual_stream_ant_msk = + mvm->nvm_data->valid_tx_ant & + ~first_antenna(mvm->nvm_data->valid_tx_ant); + if (!lq_sta->lq.dual_stream_ant_msk) { + lq_sta->lq.dual_stream_ant_msk = ANT_AB; + } else if (num_of_ant(mvm->nvm_data->valid_tx_ant) == 2) { + lq_sta->lq.dual_stream_ant_msk = + mvm->nvm_data->valid_tx_ant; + } + + /* as default allow aggregation for all tids */ + lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; + lq_sta->drv = mvm; + + /* Set last_txrate_idx to lowest rate */ + lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); + if (sband->band == IEEE80211_BAND_5GHZ) + lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; + lq_sta->is_agg = 0; +#ifdef CONFIG_MAC80211_DEBUGFS + lq_sta->dbg_fixed_rate = 0; +#endif + + rs_initialize_lq(mvm, sta, lq_sta, band); +} + +static void rs_fill_link_cmd(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, u32 new_rate) +{ + struct iwl_scale_tbl_info tbl_type; + int index = 0; + int rate_idx; + int repeat_rate = 0; + u8 ant_toggle_cnt = 0; + u8 use_ht_possible = 1; + u8 valid_tx_ant = 0; + struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; + + /* Override starting rate (index 0) if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Interpret new_rate (rate_n_flags) */ + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, + &tbl_type, &rate_idx); + + /* How many times should we repeat the initial rate? */ + if (is_legacy(tbl_type.lq_type)) { + ant_toggle_cnt = 1; + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = min(IWL_HT_NUMBER_TRY, + LINK_QUAL_AGG_DISABLE_START_DEF - 1); + } + + lq_cmd->mimo_delim = is_mimo(tbl_type.lq_type) ? 1 : 0; + + /* Fill 1st table entry (index 0) */ + lq_cmd->rs_table[index] = cpu_to_le32(new_rate); + + if (num_of_ant(tbl_type.ant_type) == 1) + lq_cmd->single_stream_ant_msk = tbl_type.ant_type; + else if (num_of_ant(tbl_type.ant_type) == 2) + lq_cmd->dual_stream_ant_msk = tbl_type.ant_type; + /* otherwise we don't modify the existing value */ + + index++; + repeat_rate--; + if (mvm) + valid_tx_ant = mvm->nvm_data->valid_tx_ant; + + /* Fill rest of rate table */ + while (index < LINK_QUAL_MAX_RETRY_NUM) { + /* Repeat initial/next rate. + * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. + * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ + while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (mvm && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + } + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index] = + cpu_to_le32(new_rate); + repeat_rate--; + index++; + } + + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, + &rate_idx); + + + /* Indicate to uCode which entries might be MIMO. + * If initial rate was MIMO, this will finally end up + * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ + if (is_mimo(tbl_type.lq_type)) + lq_cmd->mimo_delim = index; + + /* Get next rate */ + new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, + use_ht_possible); + + /* How many times should we repeat the next rate? */ + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (mvm && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = IWL_HT_NUMBER_TRY; + } + + /* Don't allow HT rates after next pass. + * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ + use_ht_possible = 0; + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index] = cpu_to_le32(new_rate); + + index++; + repeat_rate--; + } + + lq_cmd->agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; + lq_cmd->agg_disable_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + + lq_cmd->agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); +} + +static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) +{ + return hw->priv; +} +/* rate scale requires free function to be implemented */ +static void rs_free(void *mvm_rate) +{ + return; +} + +static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta, + void *mvm_sta) +{ + struct iwl_op_mode *op_mode __maybe_unused = mvm_r; + struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); + + IWL_DEBUG_RATE(mvm, "enter\n"); + IWL_DEBUG_RATE(mvm, "leave\n"); +} + +#ifdef CONFIG_MAC80211_DEBUGFS +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{ + struct iwl_mvm *mvm; + u8 valid_tx_ant; + u8 ant_sel_tx; + + mvm = lq_sta->drv; + valid_tx_ant = mvm->nvm_data->valid_tx_ant; + if (lq_sta->dbg_fixed_rate) { + ant_sel_tx = + ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) + >> RATE_MCS_ANT_POS); + if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { + *rate_n_flags = lq_sta->dbg_fixed_rate; + IWL_DEBUG_RATE(mvm, "Fixed rate ON\n"); + } else { + lq_sta->dbg_fixed_rate = 0; + IWL_ERR(mvm, + "Invalid antenna selection 0x%X, Valid is 0x%X\n", + ant_sel_tx, valid_tx_ant); + IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n"); + } + } else { + IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n"); + } +} + +static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_mvm *mvm; + char buf[64]; + size_t buf_size; + u32 parsed_rate; + + + mvm = lq_sta->drv; + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x", &parsed_rate) == 1) + lq_sta->dbg_fixed_rate = parsed_rate; + else + lq_sta->dbg_fixed_rate = 0; + + rs_program_fix_rate(mvm, lq_sta); + + return count; +} + +static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char *buff; + int desc = 0; + int i = 0; + int index = 0; + ssize_t ret; + + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_mvm *mvm; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + + mvm = lq_sta->drv; + buff = kmalloc(1024, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); + desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", + lq_sta->total_failed, lq_sta->total_success, + lq_sta->active_legacy_rate); + desc += sprintf(buff+desc, "fixed rate 0x%X\n", + lq_sta->dbg_fixed_rate); + desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", + (mvm->nvm_data->valid_tx_ant & ANT_A) ? "ANT_A," : "", + (mvm->nvm_data->valid_tx_ant & ANT_B) ? "ANT_B," : "", + (mvm->nvm_data->valid_tx_ant & ANT_C) ? "ANT_C" : ""); + desc += sprintf(buff+desc, "lq type %s\n", + (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); + if (is_Ht(tbl->lq_type)) { + desc += sprintf(buff+desc, " %s", + (is_siso(tbl->lq_type)) ? "SISO" : + ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3")); + desc += sprintf(buff+desc, " %s", + (tbl->is_ht40) ? "40MHz" : "20MHz"); + desc += sprintf(buff+desc, " %s %s %s\n", + (tbl->is_SGI) ? "SGI" : "", + (lq_sta->is_green) ? "GF enabled" : "", + (lq_sta->is_agg) ? "AGG on" : ""); + } + desc += sprintf(buff+desc, "last tx rate=0x%X\n", + lq_sta->last_rate_n_flags); + desc += sprintf(buff+desc, + "general: flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", + lq_sta->lq.flags, + lq_sta->lq.mimo_delim, + lq_sta->lq.single_stream_ant_msk, + lq_sta->lq.dual_stream_ant_msk); + + desc += sprintf(buff+desc, + "agg: time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", + le16_to_cpu(lq_sta->lq.agg_time_limit), + lq_sta->lq.agg_disable_start_th, + lq_sta->lq.agg_frame_cnt_limit); + + desc += sprintf(buff+desc, + "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", + lq_sta->lq.initial_rate_index[0], + lq_sta->lq.initial_rate_index[1], + lq_sta->lq.initial_rate_index[2], + lq_sta->lq.initial_rate_index[3]); + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + index = iwl_hwrate_to_plcp_idx( + le32_to_cpu(lq_sta->lq.rs_table[i])); + if (is_legacy(tbl->lq_type)) { + desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n", + i, le32_to_cpu(lq_sta->lq.rs_table[i]), + iwl_rate_mcs[index].mbps); + } else { + desc += sprintf(buff+desc, + " rate[%d] 0x%X %smbps (%s)\n", + i, le32_to_cpu(lq_sta->lq.rs_table[i]), + iwl_rate_mcs[index].mbps, + iwl_rate_mcs[index].mcs); + } + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); + kfree(buff); + return ret; +} + +static const struct file_operations rs_sta_dbgfs_scale_table_ops = { + .write = rs_sta_dbgfs_scale_table_write, + .read = rs_sta_dbgfs_scale_table_read, + .open = simple_open, + .llseek = default_llseek, +}; +static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char *buff; + int desc = 0; + int i, j; + ssize_t ret; + + struct iwl_lq_sta *lq_sta = file->private_data; + + buff = kmalloc(1024, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + for (i = 0; i < LQ_SIZE; i++) { + desc += sprintf(buff+desc, + "%s type=%d SGI=%d HT40=%d DUP=0 GF=%d\n" + "rate=0x%X\n", + lq_sta->active_tbl == i ? "*" : "x", + lq_sta->lq_info[i].lq_type, + lq_sta->lq_info[i].is_SGI, + lq_sta->lq_info[i].is_ht40, + lq_sta->is_green, + lq_sta->lq_info[i].current_rate); + for (j = 0; j < IWL_RATE_COUNT; j++) { + desc += sprintf(buff+desc, + "counter=%d success=%d %%=%d\n", + lq_sta->lq_info[i].win[j].counter, + lq_sta->lq_info[i].win[j].success_counter, + lq_sta->lq_info[i].win[j].success_ratio); + } + } + ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); + kfree(buff); + return ret; +} + +static const struct file_operations rs_sta_dbgfs_stats_table_ops = { + .read = rs_sta_dbgfs_stats_table_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + char buff[120]; + int desc = 0; + + if (is_Ht(tbl->lq_type)) + desc += sprintf(buff+desc, + "Bit Rate= %d Mb/s\n", + tbl->expected_tpt[lq_sta->last_txrate_idx]); + else + desc += sprintf(buff+desc, + "Bit Rate= %d Mb/s\n", + iwl_rates[lq_sta->last_txrate_idx].ieee >> 1); + + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { + .read = rs_sta_dbgfs_rate_scale_data_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir) +{ + struct iwl_lq_sta *lq_sta = mvm_sta; + lq_sta->rs_sta_dbgfs_scale_table_file = + debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, + lq_sta, &rs_sta_dbgfs_scale_table_ops); + lq_sta->rs_sta_dbgfs_stats_table_file = + debugfs_create_file("rate_stats_table", S_IRUSR, dir, + lq_sta, &rs_sta_dbgfs_stats_table_ops); + lq_sta->rs_sta_dbgfs_rate_scale_data_file = + debugfs_create_file("rate_scale_data", S_IRUSR, dir, + lq_sta, &rs_sta_dbgfs_rate_scale_data_ops); + lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = + debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, + &lq_sta->tx_agg_tid_en); +} + +static void rs_remove_debugfs(void *mvm, void *mvm_sta) +{ + struct iwl_lq_sta *lq_sta = mvm_sta; + debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); +} +#endif + +/* + * Initialization of rate scaling information is done by driver after + * the station is added. Since mac80211 calls this function before a + * station is added we ignore it. + */ +static void rs_rate_init_stub(void *mvm_r, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *mvm_sta) +{ +} +static struct rate_control_ops rs_mvm_ops = { + .module = NULL, + .name = RS_NAME, + .tx_status = rs_tx_status, + .get_rate = rs_get_rate, + .rate_init = rs_rate_init_stub, + .alloc = rs_alloc, + .free = rs_free, + .alloc_sta = rs_alloc_sta, + .free_sta = rs_free_sta, +#ifdef CONFIG_MAC80211_DEBUGFS + .add_sta_debugfs = rs_add_debugfs, + .remove_sta_debugfs = rs_remove_debugfs, +#endif +}; + +int iwl_mvm_rate_control_register(void) +{ + return ieee80211_rate_control_register(&rs_mvm_ops); +} + +void iwl_mvm_rate_control_unregister(void) +{ + ieee80211_rate_control_unregister(&rs_mvm_ops); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h new file mode 100644 index 0000000..219c685 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/rs.h @@ -0,0 +1,393 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __rs_h__ +#define __rs_h__ + +#include + +#include "iwl-config.h" + +#include "fw-api.h" +#include "iwl-trans.h" + +struct iwl_rs_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +#define IWL_RATE_60M_PLCP 3 + +enum { + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +#define LINK_QUAL_MAX_RETRY_NUM 16 + +enum { + IWL_RATE_6M_INDEX_TABLE = 0, + IWL_RATE_9M_INDEX_TABLE, + IWL_RATE_12M_INDEX_TABLE, + IWL_RATE_18M_INDEX_TABLE, + IWL_RATE_24M_INDEX_TABLE, + IWL_RATE_36M_INDEX_TABLE, + IWL_RATE_48M_INDEX_TABLE, + IWL_RATE_54M_INDEX_TABLE, + IWL_RATE_1M_INDEX_TABLE, + IWL_RATE_2M_INDEX_TABLE, + IWL_RATE_5M_INDEX_TABLE, + IWL_RATE_11M_INDEX_TABLE, + IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) +#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) +#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) +#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) +#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) +#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) +#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) +#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) +#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) +#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) +#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) +#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) +#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) + + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + IWL_RATE_SISO_6M_PLCP = 0, + IWL_RATE_SISO_12M_PLCP = 1, + IWL_RATE_SISO_18M_PLCP = 2, + IWL_RATE_SISO_24M_PLCP = 3, + IWL_RATE_SISO_36M_PLCP = 4, + IWL_RATE_SISO_48M_PLCP = 5, + IWL_RATE_SISO_54M_PLCP = 6, + IWL_RATE_SISO_60M_PLCP = 7, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, + IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + IWL_RATE_6M_IEEE = 12, + IWL_RATE_9M_IEEE = 18, + IWL_RATE_12M_IEEE = 24, + IWL_RATE_18M_IEEE = 36, + IWL_RATE_24M_IEEE = 48, + IWL_RATE_36M_IEEE = 72, + IWL_RATE_48M_IEEE = 96, + IWL_RATE_54M_IEEE = 108, + IWL_RATE_60M_IEEE = 120, + IWL_RATE_1M_IEEE = 2, + IWL_RATE_2M_IEEE = 4, + IWL_RATE_5M_IEEE = 11, + IWL_RATE_11M_IEEE = 22, +}; + +#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) + +#define IWL_INVALID_VALUE -1 + +#define IWL_MIN_RSSI_VAL -100 +#define IWL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IWL_LEGACY_FAILURE_LIMIT 160 +#define IWL_LEGACY_SUCCESS_LIMIT 480 +#define IWL_LEGACY_TABLE_COUNT 160 + +#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IWL_NONE_LEGACY_TABLE_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IWL_RS_GOOD_RATIO 12800 /* 100% */ +#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ +#define IWL_RATE_HIGH_TH 10880 /* 85% */ +#define IWL_RATE_INCREASE_TH 6400 /* 50% */ +#define IWL_RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IWL_LEGACY_SWITCH_ANTENNA1 0 +#define IWL_LEGACY_SWITCH_ANTENNA2 1 +#define IWL_LEGACY_SWITCH_SISO 2 +#define IWL_LEGACY_SWITCH_MIMO2_AB 3 +#define IWL_LEGACY_SWITCH_MIMO2_AC 4 +#define IWL_LEGACY_SWITCH_MIMO2_BC 5 +#define IWL_LEGACY_SWITCH_MIMO3_ABC 6 + +/* possible actions when in siso mode */ +#define IWL_SISO_SWITCH_ANTENNA1 0 +#define IWL_SISO_SWITCH_ANTENNA2 1 +#define IWL_SISO_SWITCH_MIMO2_AB 2 +#define IWL_SISO_SWITCH_MIMO2_AC 3 +#define IWL_SISO_SWITCH_MIMO2_BC 4 +#define IWL_SISO_SWITCH_GI 5 +#define IWL_SISO_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo mode */ +#define IWL_MIMO2_SWITCH_ANTENNA1 0 +#define IWL_MIMO2_SWITCH_ANTENNA2 1 +#define IWL_MIMO2_SWITCH_SISO_A 2 +#define IWL_MIMO2_SWITCH_SISO_B 3 +#define IWL_MIMO2_SWITCH_SISO_C 4 +#define IWL_MIMO2_SWITCH_GI 5 +#define IWL_MIMO2_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo3 mode */ +#define IWL_MIMO3_SWITCH_ANTENNA1 0 +#define IWL_MIMO3_SWITCH_ANTENNA2 1 +#define IWL_MIMO3_SWITCH_SISO_A 2 +#define IWL_MIMO3_SWITCH_SISO_B 3 +#define IWL_MIMO3_SWITCH_SISO_C 4 +#define IWL_MIMO3_SWITCH_MIMO2_AB 5 +#define IWL_MIMO3_SWITCH_MIMO2_AC 6 +#define IWL_MIMO3_SWITCH_MIMO2_BC 7 +#define IWL_MIMO3_SWITCH_GI 8 + + +#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI +#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC + +/*FIXME:RS:add possible actions for MIMO3*/ + +#define IWL_ACTION_LIMIT 3 /* # possible actions */ + +#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ +#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000) +#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100) + +#define LINK_QUAL_AGG_DISABLE_START_DEF (3) +#define LINK_QUAL_AGG_DISABLE_START_MAX (255) +#define LINK_QUAL_AGG_DISABLE_START_MIN (0) + +#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63) +#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) +#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IWL_AGG_TPT_THREHOLD 0 +#define IWL_AGG_LOAD_THRESHOLD 10 +#define IWL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +enum iwl_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MIMO3, + LQ_MAX, +}; + +#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define IWL_MAX_MCS_DISPLAY_SIZE 12 + +struct iwl_rate_mcs_info { + char mbps[IWL_MAX_MCS_DISPLAY_SIZE]; + char mcs[IWL_MAX_MCS_DISPLAY_SIZE]; +}; + +/** + * struct iwl_rate_scale_data -- tx success history for one rate + */ +struct iwl_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct iwl_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_lq_sta, + * one for "active", and one for "search". + */ +struct iwl_scale_tbl_info { + enum iwl_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_ht40; /* 1 = 40 MHz channel width */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + u8 max_search; /* maximun number of tables we can search */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ +}; + +struct iwl_traffic_load { + unsigned long time_stamp; /* age of the oldest statistics */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct iwl_lq_sta -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct iwl_lq_sta { + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u64 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + enum ieee80211_band band; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; + s8 max_rate_idx; /* Max rate set by user */ + u8 missed_rate_counter; + + struct iwl_lq_cmd lq; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[IWL_MAX_TID_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_scale_table_file; + struct dentry *rs_sta_dbgfs_stats_table_file; + struct dentry *rs_sta_dbgfs_rate_scale_data_file; + struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; + u32 dbg_fixed_rate; +#endif + struct iwl_mvm *drv; + + /* used to be in sta_info */ + int last_txrate_idx; + /* last tx rate_n_flags */ + u32 last_rate_n_flags; + /* packets destined for this STA are aggregated */ + u8 is_agg; + /* BT traffic this sta was last updated in */ + u8 last_bt_traffic; +}; + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} + +/* Initialize station's rate scaling information after adding station */ +extern void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + enum ieee80211_band band); + +/** + * iwl_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * iwl_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +extern int iwl_mvm_rate_control_register(void); + +/** + * iwl_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +extern void iwl_mvm_rate_control_unregister(void); + +#endif /* __rs__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c new file mode 100644 index 0000000..52da375 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -0,0 +1,355 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#include "iwl-trans.h" + +#include "mvm.h" +#include "fw-api.h" + +/* + * iwl_mvm_rx_rx_phy_cmd - REPLY_RX_PHY_CMD handler + * + * Copies the phy information in mvm->last_phy_info, it will be used when the + * actual data will come from the fw in the next packet. + */ +int iwl_mvm_rx_rx_phy_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + + memcpy(&mvm->last_phy_info, pkt->data, sizeof(mvm->last_phy_info)); + mvm->ampdu_ref++; + return 0; +} + +/* + * iwl_mvm_pass_packet_to_mac80211 - builds the packet for mac80211 + * + * Adds the rxb to a new skb and give it to mac80211 + */ +static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, + struct ieee80211_hdr *hdr, u16 len, + u32 ampdu_status, + struct iwl_rx_cmd_buffer *rxb, + struct ieee80211_rx_status *stats) +{ + struct sk_buff *skb; + unsigned int hdrlen, fraglen; + + /* Dont use dev_alloc_skb(), we'll have enough headroom once + * ieee80211_hdr pulled. + */ + skb = alloc_skb(128, GFP_ATOMIC); + if (!skb) { + IWL_ERR(mvm, "alloc_skb failed\n"); + return; + } + /* If frame is small enough to fit in skb->head, pull it completely. + * If not, only pull ieee80211_hdr so that splice() or TCP coalesce + * are more efficient. + */ + hdrlen = (len <= skb_tailroom(skb)) ? len : sizeof(*hdr); + + memcpy(skb_put(skb, hdrlen), hdr, hdrlen); + fraglen = len - hdrlen; + + if (fraglen) { + int offset = (void *)hdr + hdrlen - + rxb_addr(rxb) + rxb_offset(rxb); + + skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset, + fraglen, rxb->truesize); + } + + memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); + + ieee80211_rx(mvm->hw, skb); +} + +/* + * iwl_mvm_calc_rssi - calculate the rssi in dBm + * @phy_info: the phy information for the coming packet + */ +static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm, + struct iwl_rx_phy_info *phy_info) +{ + u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db; + u32 val; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the Digital Signal Processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's Automatic Gain Control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. + */ + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]); + rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS; + rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS; + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]); + rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS; + + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]); + agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS; + + max_rssi = max_t(u32, rssi_a, rssi_b); + max_rssi = max_t(u32, max_rssi, rssi_c); + + IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", + rssi_a, rssi_b, rssi_c, max_rssi, agc_db); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc_db - IWL_RSSI_OFFSET; +} + +/* + * iwl_mvm_set_mac80211_rx_flag - translate fw status to mac80211 format + * @mvm: the mvm object + * @hdr: 80211 header + * @stats: status in mac80211's format + * @rx_pkt_status: status coming from fw + * + * returns non 0 value if the packet should be dropped + */ +static u32 iwl_mvm_set_mac80211_rx_flag(struct iwl_mvm *mvm, + struct ieee80211_hdr *hdr, + struct ieee80211_rx_status *stats, + u32 rx_pkt_status) +{ + if (!ieee80211_has_protected(hdr->frame_control) || + (rx_pkt_status & RX_MPDU_RES_STATUS_SEC_ENC_MSK) == + RX_MPDU_RES_STATUS_SEC_NO_ENC) + return 0; + + /* packet was encrypted with unknown alg */ + if ((rx_pkt_status & RX_MPDU_RES_STATUS_SEC_ENC_MSK) == + RX_MPDU_RES_STATUS_SEC_ENC_ERR) + return 0; + + switch (rx_pkt_status & RX_MPDU_RES_STATUS_SEC_ENC_MSK) { + case RX_MPDU_RES_STATUS_SEC_CCM_ENC: + /* alg is CCM: check MIC only */ + if (!(rx_pkt_status & RX_MPDU_RES_STATUS_MIC_OK)) + return -1; + + stats->flag |= RX_FLAG_DECRYPTED; + IWL_DEBUG_WEP(mvm, "hw decrypted CCMP successfully\n"); + return 0; + + case RX_MPDU_RES_STATUS_SEC_TKIP_ENC: + /* Don't drop the frame and decrypt it in SW */ + if (!(rx_pkt_status & RX_MPDU_RES_STATUS_TTAK_OK)) + return 0; + /* fall through if TTAK OK */ + + case RX_MPDU_RES_STATUS_SEC_WEP_ENC: + if (!(rx_pkt_status & RX_MPDU_RES_STATUS_ICV_OK)) + return -1; + + stats->flag |= RX_FLAG_DECRYPTED; + return 0; + + default: + IWL_ERR(mvm, "Unhandled alg: 0x%x\n", rx_pkt_status); + } + + return 0; +} + +/* + * iwl_mvm_rx_rx_mpdu - REPLY_RX_MPDU_CMD handler + * + * Handles the actual data of the Rx packet from the fw + */ +int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct ieee80211_hdr *hdr; + struct ieee80211_rx_status rx_status = {}; + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_rx_phy_info *phy_info; + struct iwl_rx_mpdu_res_start *rx_res; + u32 len; + u32 ampdu_status; + u32 rate_n_flags; + u32 rx_pkt_status; + + phy_info = &mvm->last_phy_info; + rx_res = (struct iwl_rx_mpdu_res_start *)pkt->data; + hdr = (struct ieee80211_hdr *)(pkt->data + sizeof(*rx_res)); + len = le16_to_cpu(rx_res->byte_count); + rx_pkt_status = le32_to_cpup((__le32 *) + (pkt->data + sizeof(*rx_res) + len)); + + memset(&rx_status, 0, sizeof(rx_status)); + + /* + * drop the packet if it has failed being decrypted by HW + */ + if (iwl_mvm_set_mac80211_rx_flag(mvm, hdr, &rx_status, rx_pkt_status)) { + IWL_DEBUG_DROP(mvm, "Bad decryption results 0x%08x\n", + rx_pkt_status); + return 0; + } + + if ((unlikely(phy_info->cfg_phy_cnt > 20))) { + IWL_DEBUG_DROP(mvm, "dsp size out of range [0,20]: %d\n", + phy_info->cfg_phy_cnt); + return 0; + } + + if (!(rx_pkt_status & RX_MPDU_RES_STATUS_CRC_OK) || + !(rx_pkt_status & RX_MPDU_RES_STATUS_OVERRUN_OK)) { + IWL_DEBUG_RX(mvm, "Bad CRC or FIFO: 0x%08X.\n", rx_pkt_status); + return 0; + } + + /* This will be used in several places later */ + rate_n_flags = le32_to_cpu(phy_info->rate_n_flags); + + /* rx_status carries information about the packet to mac80211 */ + rx_status.mactime = le64_to_cpu(phy_info->timestamp); + rx_status.band = + (phy_info->phy_flags & cpu_to_le16(RX_RES_PHY_FLAGS_BAND_24)) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(phy_info->channel), + rx_status.band); + /* + * TSF as indicated by the fw is at INA time, but mac80211 expects the + * TSF at the beginning of the MPDU. + */ + /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ + + /* Find max signal strength (dBm) among 3 antenna/receiver chains */ + rx_status.signal = iwl_mvm_calc_rssi(mvm, phy_info); + + IWL_DEBUG_STATS_LIMIT(mvm, "Rssi %d, TSF %llu\n", rx_status.signal, + (unsigned long long)rx_status.mactime); + + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bit field. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favor of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = (le16_to_cpu(phy_info->phy_flags) & + RX_RES_PHY_FLAGS_ANTENNA) + >> RX_RES_PHY_FLAGS_ANTENNA_POS; + + /* set the preamble flag if appropriate */ + if (phy_info->phy_flags & cpu_to_le16(RX_RES_PHY_FLAGS_SHORT_PREAMBLE)) + rx_status.flag |= RX_FLAG_SHORTPRE; + + if (phy_info->phy_flags & cpu_to_le16(RX_RES_PHY_FLAGS_AGG)) { + /* + * We know which subframes of an A-MPDU belong + * together since we get a single PHY response + * from the firmware for all of them + */ + rx_status.flag |= RX_FLAG_AMPDU_DETAILS; + rx_status.ampdu_reference = mvm->ampdu_ref; + } + + /* Set up the HT phy flags */ + switch (rate_n_flags & RATE_MCS_CHAN_WIDTH_MSK) { + case RATE_MCS_CHAN_WIDTH_20: + break; + case RATE_MCS_CHAN_WIDTH_40: + rx_status.flag |= RX_FLAG_40MHZ; + break; + case RATE_MCS_CHAN_WIDTH_80: + rx_status.flag |= RX_FLAG_80MHZ; + break; + case RATE_MCS_CHAN_WIDTH_160: + rx_status.flag |= RX_FLAG_160MHZ; + break; + } + if (rate_n_flags & RATE_MCS_SGI_MSK) + rx_status.flag |= RX_FLAG_SHORT_GI; + if (rate_n_flags & RATE_HT_MCS_GF_MSK) + rx_status.flag |= RX_FLAG_HT_GF; + if (rate_n_flags & RATE_MCS_HT_MSK) { + rx_status.flag |= RX_FLAG_HT; + rx_status.rate_idx = rate_n_flags & RATE_HT_MCS_INDEX_MSK; + } else if (rate_n_flags & RATE_MCS_VHT_MSK) { + rx_status.vht_nss = + ((rate_n_flags & RATE_VHT_MCS_NSS_MSK) >> + RATE_VHT_MCS_NSS_POS) + 1; + rx_status.rate_idx = rate_n_flags & RATE_VHT_MCS_RATE_CODE_MSK; + rx_status.flag |= RX_FLAG_VHT; + } else { + rx_status.rate_idx = + iwl_mvm_legacy_rate_to_mac80211_idx(rate_n_flags, + rx_status.band); + } + + iwl_mvm_pass_packet_to_mac80211(mvm, hdr, len, ampdu_status, + rxb, &rx_status); + return 0; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c new file mode 100644 index 0000000..406c53a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -0,0 +1,437 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include + +#include "mvm.h" +#include "iwl-eeprom-parse.h" +#include "fw-api-scan.h" + +#define IWL_PLCP_QUIET_THRESH 1 +#define IWL_ACTIVE_QUIET_TIME 10 + +static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm) +{ + u16 rx_chain; + u8 rx_ant = mvm->nvm_data->valid_rx_ant; + + rx_chain = rx_ant << PHY_RX_CHAIN_VALID_POS; + rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS; + rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_SEL_POS; + rx_chain |= 0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS; + return cpu_to_le16(rx_chain); +} + +static inline __le32 iwl_mvm_scan_max_out_time(struct ieee80211_vif *vif) +{ + if (vif->bss_conf.assoc) + return cpu_to_le32(200 * 1024); + else + return 0; +} + +static inline __le32 iwl_mvm_scan_suspend_time(struct ieee80211_vif *vif) +{ + if (vif->bss_conf.assoc) + return cpu_to_le32(vif->bss_conf.beacon_int); + else + return 0; +} + +static inline __le32 +iwl_mvm_scan_rxon_flags(struct cfg80211_scan_request *req) +{ + if (req->channels[0]->band == IEEE80211_BAND_2GHZ) + return cpu_to_le32(PHY_BAND_24); + else + return cpu_to_le32(PHY_BAND_5); +} + +static inline __le32 +iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band, + bool no_cck) +{ + u32 tx_ant; + + mvm->scan_last_antenna_idx = + iwl_mvm_next_antenna(mvm, mvm->nvm_data->valid_tx_ant, + mvm->scan_last_antenna_idx); + tx_ant = BIT(mvm->scan_last_antenna_idx) << RATE_MCS_ANT_POS; + + if (band == IEEE80211_BAND_2GHZ && !no_cck) + return cpu_to_le32(IWL_RATE_1M_PLCP | RATE_MCS_CCK_MSK | + tx_ant); + else + return cpu_to_le32(IWL_RATE_6M_PLCP | tx_ant); +} + +/* + * We insert the SSIDs in an inverted order, because the FW will + * invert it back. The most prioritized SSID, which is first in the + * request list, is not copied here, but inserted directly to the probe + * request. + */ +static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, + struct cfg80211_scan_request *req) +{ + int fw_idx, req_idx; + + fw_idx = 0; + for (req_idx = req->n_ssids - 1; req_idx > 0; req_idx--) { + cmd->direct_scan[fw_idx].id = WLAN_EID_SSID; + cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len; + memcpy(cmd->direct_scan[fw_idx].ssid, + req->ssids[req_idx].ssid, + req->ssids[req_idx].ssid_len); + } +} + +/* + * If req->n_ssids > 0, it means we should do an active scan. + * In case of active scan w/o directed scan, we receive a zero-length SSID + * just to notify that this scan is active and not passive. + * In order to notify the FW of the number of SSIDs we wish to scan (including + * the zero-length one), we need to set the corresponding bits in chan->type, + * one for each SSID, and set the active bit (first). + */ +static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids) +{ + if (band == IEEE80211_BAND_2GHZ) + return 30 + 3 * (n_ssids + 1); + return 20 + 2 * (n_ssids + 1); +} + +static u16 iwl_mvm_get_passive_dwell(enum ieee80211_band band) +{ + return band == IEEE80211_BAND_2GHZ ? 100 + 20 : 100 + 10; +} + +static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, + struct cfg80211_scan_request *req) +{ + u16 passive_dwell = iwl_mvm_get_passive_dwell(req->channels[0]->band); + u16 active_dwell = iwl_mvm_get_active_dwell(req->channels[0]->band, + req->n_ssids); + struct iwl_scan_channel *chan = (struct iwl_scan_channel *) + (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); + int i; + __le32 chan_type_value; + + if (req->n_ssids > 0) + chan_type_value = cpu_to_le32(BIT(req->n_ssids + 1) - 1); + else + chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; + + for (i = 0; i < cmd->channel_count; i++) { + chan->channel = cpu_to_le16(req->channels[i]->hw_value); + if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) + chan->type = SCAN_CHANNEL_TYPE_PASSIVE; + else + chan->type = chan_type_value; + chan->active_dwell = cpu_to_le16(active_dwell); + chan->passive_dwell = cpu_to_le16(passive_dwell); + chan->iteration_count = cpu_to_le16(1); + chan++; + } +} + +/* + * Fill in probe request with the following parameters: + * TA is our vif HW address, which mac80211 ensures we have. + * Packet is broadcasted, so this is both SA and DA. + * The probe request IE is made out of two: first comes the most prioritized + * SSID if a directed scan is requested. Second comes whatever extra + * information was given to us as the scan request IE. + */ +static u16 iwl_mvm_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta, + int n_ssids, const u8 *ssid, int ssid_len, + const u8 *ie, int ie_len, + int left) +{ + int len = 0; + u8 *pos = NULL; + + /* Make sure there is enough space for the probe request, + * two mandatory IEs and the data */ + left -= 24; + if (left < 0) + return 0; + + frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); + eth_broadcast_addr(frame->da); + memcpy(frame->sa, ta, ETH_ALEN); + eth_broadcast_addr(frame->bssid); + frame->seq_ctrl = 0; + + len += 24; + + /* for passive scans, no need to fill anything */ + if (n_ssids == 0) + return (u16)len; + + /* points to the payload of the request */ + pos = &frame->u.probe_req.variable[0]; + + /* fill in our SSID IE */ + left -= ssid_len + 2; + if (left < 0) + return 0; + *pos++ = WLAN_EID_SSID; + *pos++ = ssid_len; + if (ssid && ssid_len) { /* ssid_len may be == 0 even if ssid is valid */ + memcpy(pos, ssid, ssid_len); + pos += ssid_len; + } + + len += ssid_len + 2; + + if (WARN_ON(left < ie_len)) + return len; + + if (ie && ie_len) { + memcpy(pos, ie, ie_len); + len += ie_len; + } + + return (u16)len; +} + +int iwl_mvm_scan_request(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req) +{ + struct iwl_host_cmd hcmd = { + .id = SCAN_REQUEST_CMD, + .len = { 0, }, + .data = { mvm->scan_cmd, }, + .flags = CMD_SYNC, + .dataflags = { IWL_HCMD_DFL_NOCOPY, }, + }; + struct iwl_scan_cmd *cmd = mvm->scan_cmd; + int ret; + u32 status; + int ssid_len = 0; + u8 *ssid = NULL; + + lockdep_assert_held(&mvm->mutex); + BUG_ON(mvm->scan_cmd == NULL); + + IWL_DEBUG_SCAN(mvm, "Handling mac80211 scan request\n"); + mvm->scan_status = IWL_MVM_SCAN_OS; + memset(cmd, 0, sizeof(struct iwl_scan_cmd) + + mvm->fw->ucode_capa.max_probe_length + + (MAX_NUM_SCAN_CHANNELS * sizeof(struct iwl_scan_channel))); + + cmd->channel_count = (u8)req->n_channels; + cmd->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME); + cmd->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH); + cmd->rxchain_sel_flags = iwl_mvm_scan_rx_chain(mvm); + cmd->max_out_time = iwl_mvm_scan_max_out_time(vif); + cmd->suspend_time = iwl_mvm_scan_suspend_time(vif); + cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req); + cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP | + MAC_FILTER_IN_BEACON); + cmd->type = SCAN_TYPE_FORCED; + cmd->repeats = cpu_to_le32(1); + + /* + * If the user asked for passive scan, don't change to active scan if + * you see any activity on the channel - remain passive. + */ + if (req->n_ssids > 0) { + cmd->passive2active = cpu_to_le16(1); + ssid = req->ssids[0].ssid; + ssid_len = req->ssids[0].ssid_len; + } else { + cmd->passive2active = 0; + } + + iwl_mvm_scan_fill_ssids(cmd, req); + + cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL); + cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; + cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); + cmd->tx_cmd.rate_n_flags = + iwl_mvm_scan_rate_n_flags(mvm, req->channels[0]->band, + req->no_cck); + + cmd->tx_cmd.len = + cpu_to_le16(iwl_mvm_fill_probe_req( + (struct ieee80211_mgmt *)cmd->data, + vif->addr, + req->n_ssids, ssid, ssid_len, + req->ie, req->ie_len, + mvm->fw->ucode_capa.max_probe_length)); + + iwl_mvm_scan_fill_channels(cmd, req); + + cmd->len = cpu_to_le16(sizeof(struct iwl_scan_cmd) + + le16_to_cpu(cmd->tx_cmd.len) + + (cmd->channel_count * sizeof(struct iwl_scan_channel))); + hcmd.len[0] = le16_to_cpu(cmd->len); + + status = SCAN_RESPONSE_OK; + ret = iwl_mvm_send_cmd_status(mvm, &hcmd, &status); + if (!ret && status == SCAN_RESPONSE_OK) { + IWL_DEBUG_SCAN(mvm, "Scan request was sent successfully\n"); + } else { + /* + * If the scan failed, it usually means that the FW was unable + * to allocate the time events. Warn on it, but maybe we + * should try to send the command again with different params. + */ + IWL_ERR(mvm, "Scan failed! status 0x%x ret %d\n", + status, ret); + mvm->scan_status = IWL_MVM_SCAN_NONE; + ret = -EIO; + } + return ret; +} + +int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_cmd_response *resp = (void *)pkt->data; + + IWL_DEBUG_SCAN(mvm, "Scan response received. status 0x%x\n", + le32_to_cpu(resp->status)); + return 0; +} + +int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_scan_complete_notif *notif = (void *)pkt->data; + + IWL_DEBUG_SCAN(mvm, "Scan complete: status=0x%x scanned channels=%d\n", + notif->status, notif->scanned_channels); + + mvm->scan_status = IWL_MVM_SCAN_NONE; + ieee80211_scan_completed(mvm->hw, notif->status != SCAN_COMP_STATUS_OK); + + return 0; +} + +static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_mvm *mvm = + container_of(notif_wait, struct iwl_mvm, notif_wait); + struct iwl_scan_complete_notif *notif; + u32 *resp; + + switch (pkt->hdr.cmd) { + case SCAN_ABORT_CMD: + resp = (void *)pkt->data; + if (*resp == CAN_ABORT_STATUS) { + IWL_DEBUG_SCAN(mvm, + "Scan can be aborted, wait until completion\n"); + return false; + } + + IWL_DEBUG_SCAN(mvm, "Scan cannot be aborted, exit now: %d\n", + *resp); + return true; + + case SCAN_COMPLETE_NOTIFICATION: + notif = (void *)pkt->data; + IWL_DEBUG_SCAN(mvm, "Scan aborted: status 0x%x\n", + notif->status); + return true; + + default: + WARN_ON(1); + return false; + }; +} + +void iwl_mvm_cancel_scan(struct iwl_mvm *mvm) +{ + struct iwl_notification_wait wait_scan_abort; + static const u8 scan_abort_notif[] = { SCAN_ABORT_CMD, + SCAN_COMPLETE_NOTIFICATION }; + int ret; + + iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, + scan_abort_notif, + ARRAY_SIZE(scan_abort_notif), + iwl_mvm_scan_abort_notif, NULL); + + ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, CMD_SYNC, 0, NULL); + if (ret) { + IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret); + goto out_remove_notif; + } + + ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_abort, 1 * HZ); + if (ret) + IWL_ERR(mvm, "%s - failed on timeout\n", __func__); + + return; + +out_remove_notif: + iwl_remove_notification(&mvm->notif_wait, &wait_scan_abort); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c new file mode 100644 index 0000000..69603c3 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -0,0 +1,1211 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include + +#include "mvm.h" +#include "sta.h" + +static int iwl_mvm_find_free_sta_id(struct iwl_mvm *mvm) +{ + int sta_id; + + WARN_ON_ONCE(test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)); + + lockdep_assert_held(&mvm->mutex); + + /* Don't take rcu_read_lock() since we are protected by mvm->mutex */ + for (sta_id = 0; sta_id < IWL_MVM_STATION_COUNT; sta_id++) + if (!rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex))) + return sta_id; + return IWL_MVM_STATION_COUNT; +} + +/* add a NEW station to fw */ +int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta) +{ + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + struct iwl_mvm_add_sta_cmd add_sta_cmd; + int ret; + u32 status; + u32 agg_size = 0, mpdu_dens = 0; + + memset(&add_sta_cmd, 0, sizeof(add_sta_cmd)); + + add_sta_cmd.sta_id = mvm_sta->sta_id; + add_sta_cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); + add_sta_cmd.tfd_queue_msk = cpu_to_le32(mvm_sta->tfd_queue_msk); + memcpy(&add_sta_cmd.addr, sta->addr, ETH_ALEN); + + /* STA_FLG_FAT_EN_MSK ? */ + /* STA_FLG_MIMO_EN_MSK ? */ + + if (sta->ht_cap.ht_supported) { + add_sta_cmd.station_flags_msk |= + cpu_to_le32(STA_FLG_MAX_AGG_SIZE_MSK | + STA_FLG_AGG_MPDU_DENS_MSK); + + mpdu_dens = sta->ht_cap.ampdu_density; + } + + if (sta->vht_cap.vht_supported) { + agg_size = sta->vht_cap.cap & + IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; + agg_size >>= + IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; + } else if (sta->ht_cap.ht_supported) { + agg_size = sta->ht_cap.ampdu_factor; + } + + add_sta_cmd.station_flags |= + cpu_to_le32(agg_size << STA_FLG_MAX_AGG_SIZE_SHIFT); + add_sta_cmd.station_flags |= + cpu_to_le32(mpdu_dens << STA_FLG_AGG_MPDU_DENS_SHIFT); + + status = ADD_STA_SUCCESS; + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(add_sta_cmd), + &add_sta_cmd, &status); + if (ret) + return ret; + + switch (status) { + case ADD_STA_SUCCESS: + IWL_DEBUG_ASSOC(mvm, "ADD_STA PASSED\n"); + break; + default: + ret = -EIO; + IWL_ERR(mvm, "ADD_STA failed\n"); + break; + } + + return ret; +} + +int iwl_mvm_add_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + int i, ret, sta_id; + + lockdep_assert_held(&mvm->mutex); + + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) + sta_id = iwl_mvm_find_free_sta_id(mvm); + else + sta_id = mvm_sta->sta_id; + + if (WARN_ON_ONCE(sta_id == IWL_MVM_STATION_COUNT)) + return -ENOSPC; + + spin_lock_init(&mvm_sta->lock); + + mvm_sta->sta_id = sta_id; + mvm_sta->mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, + mvmvif->color); + mvm_sta->vif = vif; + mvm_sta->max_agg_bufsize = LINK_QUAL_AGG_FRAME_LIMIT_DEF; + + /* HW restart, don't assume the memory has been zeroed */ + atomic_set(&mvm_sta->pending_frames, 0); + mvm_sta->tid_disable_agg = 0; + mvm_sta->tfd_queue_msk = 0; + for (i = 0; i < IEEE80211_NUM_ACS; i++) + if (vif->hw_queue[i] != IEEE80211_INVAL_HW_QUEUE) + mvm_sta->tfd_queue_msk |= BIT(vif->hw_queue[i]); + + if (vif->cab_queue != IEEE80211_INVAL_HW_QUEUE) + mvm_sta->tfd_queue_msk |= BIT(vif->cab_queue); + + /* for HW restart - need to reset the seq_number etc... */ + memset(mvm_sta->tid_data, 0, sizeof(mvm_sta->tid_data)); + + ret = iwl_mvm_sta_add_to_fw(mvm, sta); + if (ret) + return ret; + + /* The first station added is the AP, the others are TDLS STAs */ + if (vif->type == NL80211_IFTYPE_STATION && + mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT) + mvmvif->ap_sta_id = sta_id; + + rcu_assign_pointer(mvm->fw_id_to_mac_id[sta_id], sta); + + return 0; +} + +int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, + bool drain) +{ + struct iwl_mvm_add_sta_cmd cmd = {}; + int ret; + u32 status; + + lockdep_assert_held(&mvm->mutex); + + cmd.mac_id_n_color = cpu_to_le32(mvmsta->mac_id_n_color); + cmd.sta_id = mvmsta->sta_id; + cmd.add_modify = STA_MODE_MODIFY; + cmd.station_flags = drain ? cpu_to_le32(STA_FLG_DRAIN_FLOW) : 0; + cmd.station_flags_msk = cpu_to_le32(STA_FLG_DRAIN_FLOW); + + status = ADD_STA_SUCCESS; + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd), + &cmd, &status); + if (ret) + return ret; + + switch (status) { + case ADD_STA_SUCCESS: + IWL_DEBUG_INFO(mvm, "Frames for staid %d will drained in fw\n", + mvmsta->sta_id); + break; + default: + ret = -EIO; + IWL_ERR(mvm, "Couldn't drain frames for staid %d\n", + mvmsta->sta_id); + break; + } + + return ret; +} + +/* + * Remove a station from the FW table. Before sending the command to remove + * the station validate that the station is indeed known to the driver (sanity + * only). + */ +static int iwl_mvm_rm_sta_common(struct iwl_mvm *mvm, u8 sta_id) +{ + struct ieee80211_sta *sta; + struct iwl_mvm_rm_sta_cmd rm_sta_cmd = { + .sta_id = sta_id, + }; + int ret; + + sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + + /* Note: internal stations are marked as error values */ + if (!sta) { + IWL_ERR(mvm, "Invalid station id\n"); + return -EINVAL; + } + + ret = iwl_mvm_send_cmd_pdu(mvm, REMOVE_STA, CMD_SYNC, + sizeof(rm_sta_cmd), &rm_sta_cmd); + if (ret) { + IWL_ERR(mvm, "Failed to remove station. Id=%d\n", sta_id); + return ret; + } + + return 0; +} + +void iwl_mvm_sta_drained_wk(struct work_struct *wk) +{ + struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm, sta_drained_wk); + u8 sta_id; + + /* + * The mutex is needed because of the SYNC cmd, but not only: if the + * work would run concurrently with iwl_mvm_rm_sta, it would run before + * iwl_mvm_rm_sta sets the station as busy, and exit. Then + * iwl_mvm_rm_sta would set the station as busy, and nobody will clean + * that later. + */ + mutex_lock(&mvm->mutex); + + for_each_set_bit(sta_id, mvm->sta_drained, IWL_MVM_STATION_COUNT) { + int ret; + struct ieee80211_sta *sta = + rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + + /* This station is in use */ + if (!IS_ERR(sta)) + continue; + + if (PTR_ERR(sta) == -EINVAL) { + IWL_ERR(mvm, "Drained sta %d, but it is internal?\n", + sta_id); + continue; + } + + if (!sta) { + IWL_ERR(mvm, "Drained sta %d, but it was NULL?\n", + sta_id); + continue; + } + + WARN_ON(PTR_ERR(sta) != -EBUSY); + /* This station was removed and we waited until it got drained, + * we can now proceed and remove it. + */ + ret = iwl_mvm_rm_sta_common(mvm, sta_id); + if (ret) { + IWL_ERR(mvm, + "Couldn't remove sta %d after it was drained\n", + sta_id); + continue; + } + rcu_assign_pointer(mvm->fw_id_to_mac_id[sta_id], NULL); + clear_bit(sta_id, mvm->sta_drained); + } + + mutex_unlock(&mvm->mutex); +} + +int iwl_mvm_rm_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + int ret; + + lockdep_assert_held(&mvm->mutex); + + if (vif->type == NL80211_IFTYPE_STATION && + mvmvif->ap_sta_id == mvm_sta->sta_id) { + /* + * Put a non-NULL since the fw station isn't removed. + * It will be removed after the MAC will be set as + * unassoc. + */ + rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], + ERR_PTR(-EINVAL)); + + /* flush its queues here since we are freeing mvm_sta */ + ret = iwl_mvm_flush_tx_path(mvm, mvm_sta->tfd_queue_msk, true); + + /* if we are associated - we can't remove the AP STA now */ + if (vif->bss_conf.assoc) + return ret; + + /* unassoc - go ahead - remove the AP STA now */ + mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT; + } + + /* + * There are frames pending on the AC queues for this station. + * We need to wait until all the frames are drained... + */ + if (atomic_read(&mvm_sta->pending_frames)) { + ret = iwl_mvm_drain_sta(mvm, mvm_sta, true); + rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], + ERR_PTR(-EBUSY)); + } else { + ret = iwl_mvm_rm_sta_common(mvm, mvm_sta->sta_id); + rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], NULL); + } + + return ret; +} + +int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u8 sta_id) +{ + int ret = iwl_mvm_rm_sta_common(mvm, sta_id); + + lockdep_assert_held(&mvm->mutex); + + rcu_assign_pointer(mvm->fw_id_to_mac_id[sta_id], NULL); + return ret; +} + +int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta, + u32 qmask) +{ + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) { + sta->sta_id = iwl_mvm_find_free_sta_id(mvm); + if (WARN_ON_ONCE(sta->sta_id == IWL_MVM_STATION_COUNT)) + return -ENOSPC; + } + + sta->tfd_queue_msk = qmask; + + /* put a non-NULL value so iterating over the stations won't stop */ + rcu_assign_pointer(mvm->fw_id_to_mac_id[sta->sta_id], ERR_PTR(-EINVAL)); + return 0; +} + +void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta) +{ + rcu_assign_pointer(mvm->fw_id_to_mac_id[sta->sta_id], NULL); + memset(sta, 0, sizeof(struct iwl_mvm_int_sta)); + sta->sta_id = IWL_MVM_STATION_COUNT; +} + +static int iwl_mvm_add_int_sta_common(struct iwl_mvm *mvm, + struct iwl_mvm_int_sta *sta, + const u8 *addr, + u16 mac_id, u16 color) +{ + struct iwl_mvm_add_sta_cmd cmd; + int ret; + u32 status; + + lockdep_assert_held(&mvm->mutex); + + memset(&cmd, 0, sizeof(struct iwl_mvm_add_sta_cmd)); + cmd.sta_id = sta->sta_id; + cmd.mac_id_n_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mac_id, + color)); + + cmd.tfd_queue_msk = cpu_to_le32(sta->tfd_queue_msk); + + if (addr) + memcpy(cmd.addr, addr, ETH_ALEN); + + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd), + &cmd, &status); + if (ret) + return ret; + + switch (status) { + case ADD_STA_SUCCESS: + IWL_DEBUG_INFO(mvm, "Internal station added.\n"); + return 0; + default: + ret = -EIO; + IWL_ERR(mvm, "Add internal station failed, status=0x%x\n", + status); + break; + } + return ret; +} + +int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm) +{ + int ret; + + lockdep_assert_held(&mvm->mutex); + + /* Add the aux station, but without any queues */ + ret = iwl_mvm_allocate_int_sta(mvm, &mvm->aux_sta, 0); + if (ret) + return ret; + + ret = iwl_mvm_add_int_sta_common(mvm, &mvm->aux_sta, NULL, + MAC_INDEX_AUX, 0); + + if (ret) + iwl_mvm_dealloc_int_sta(mvm, &mvm->aux_sta); + return ret; +} + +/* + * Send the add station command for the vif's broadcast station. + * Assumes that the station was already allocated. + * + * @mvm: the mvm component + * @vif: the interface to which the broadcast station is added + * @bsta: the broadcast station to add. + */ +int iwl_mvm_send_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_mvm_int_sta *bsta) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + static const u8 baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; + + lockdep_assert_held(&mvm->mutex); + + if (WARN_ON_ONCE(bsta->sta_id == IWL_MVM_STATION_COUNT)) + return -ENOSPC; + + return iwl_mvm_add_int_sta_common(mvm, bsta, baddr, + mvmvif->id, mvmvif->color); +} + +/* Send the FW a request to remove the station from it's internal data + * structures, but DO NOT remove the entry from the local data structures. */ +int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, + struct iwl_mvm_int_sta *bsta) +{ + int ret; + + lockdep_assert_held(&mvm->mutex); + + ret = iwl_mvm_rm_sta_common(mvm, bsta->sta_id); + if (ret) + IWL_WARN(mvm, "Failed sending remove station\n"); + return ret; +} + +/* Allocate a new station entry for the broadcast station to the given vif, + * and send it to the FW. + * Note that each P2P mac should have its own broadcast station. + * + * @mvm: the mvm component + * @vif: the interface to which the broadcast station is added + * @bsta: the broadcast station to add. */ +int iwl_mvm_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_mvm_int_sta *bsta) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + static const u8 baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; + u32 qmask; + int ret; + + lockdep_assert_held(&mvm->mutex); + + qmask = iwl_mvm_mac_get_queues_mask(mvm, vif); + ret = iwl_mvm_allocate_int_sta(mvm, bsta, qmask); + if (ret) + return ret; + + ret = iwl_mvm_add_int_sta_common(mvm, bsta, baddr, + mvmvif->id, mvmvif->color); + + if (ret) + iwl_mvm_dealloc_int_sta(mvm, bsta); + return ret; +} + +/* + * Send the FW a request to remove the station from it's internal data + * structures, and in addition remove it from the local data structure. + */ +int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *bsta) +{ + int ret; + + lockdep_assert_held(&mvm->mutex); + + ret = iwl_mvm_rm_sta_common(mvm, bsta->sta_id); + if (ret) + return ret; + + iwl_mvm_dealloc_int_sta(mvm, bsta); + return ret; +} + +int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + int tid, u16 ssn, bool start) +{ + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + struct iwl_mvm_add_sta_cmd cmd = {}; + int ret; + u32 status; + + lockdep_assert_held(&mvm->mutex); + + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); + cmd.sta_id = mvm_sta->sta_id; + cmd.add_modify = STA_MODE_MODIFY; + cmd.add_immediate_ba_tid = (u8) tid; + cmd.add_immediate_ba_ssn = cpu_to_le16(ssn); + cmd.modify_mask = start ? STA_MODIFY_ADD_BA_TID : + STA_MODIFY_REMOVE_BA_TID; + + status = ADD_STA_SUCCESS; + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd), + &cmd, &status); + if (ret) + return ret; + + switch (status) { + case ADD_STA_SUCCESS: + IWL_DEBUG_INFO(mvm, "RX BA Session %sed in fw\n", + start ? "start" : "stopp"); + break; + case ADD_STA_IMMEDIATE_BA_FAILURE: + IWL_WARN(mvm, "RX BA Session refused by fw\n"); + ret = -ENOSPC; + break; + default: + ret = -EIO; + IWL_ERR(mvm, "RX BA Session failed %sing, status 0x%x\n", + start ? "start" : "stopp", status); + break; + } + + return ret; +} + +static int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + int tid, u8 queue, bool start) +{ + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + struct iwl_mvm_add_sta_cmd cmd = {}; + int ret; + u32 status; + + lockdep_assert_held(&mvm->mutex); + + if (start) { + mvm_sta->tfd_queue_msk |= BIT(queue); + mvm_sta->tid_disable_agg &= ~BIT(tid); + } else { + mvm_sta->tfd_queue_msk &= ~BIT(queue); + mvm_sta->tid_disable_agg |= BIT(tid); + } + + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); + cmd.sta_id = mvm_sta->sta_id; + cmd.add_modify = STA_MODE_MODIFY; + cmd.modify_mask = STA_MODIFY_QUEUES | STA_MODIFY_TID_DISABLE_TX; + cmd.tfd_queue_msk = cpu_to_le32(mvm_sta->tfd_queue_msk); + cmd.tid_disable_tx = cpu_to_le16(mvm_sta->tid_disable_agg); + + status = ADD_STA_SUCCESS; + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd), + &cmd, &status); + if (ret) + return ret; + + switch (status) { + case ADD_STA_SUCCESS: + break; + default: + ret = -EIO; + IWL_ERR(mvm, "TX BA Session failed %sing, status 0x%x\n", + start ? "start" : "stopp", status); + break; + } + + return ret; +} + +static const u8 tid_to_ac[] = { + IEEE80211_AC_BE, + IEEE80211_AC_BK, + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_VO, +}; + +int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 *ssn) +{ + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + struct iwl_mvm_tid_data *tid_data; + int txq_id; + + if (WARN_ON_ONCE(tid >= IWL_MAX_TID_COUNT)) + return -EINVAL; + + if (mvmsta->tid_data[tid].state != IWL_AGG_OFF) { + IWL_ERR(mvm, "Start AGG when state is not IWL_AGG_OFF %d!\n", + mvmsta->tid_data[tid].state); + return -ENXIO; + } + + lockdep_assert_held(&mvm->mutex); + + for (txq_id = IWL_MVM_FIRST_AGG_QUEUE; + txq_id <= IWL_MVM_LAST_AGG_QUEUE; txq_id++) + if (mvm->queue_to_mac80211[txq_id] == + IWL_INVALID_MAC80211_QUEUE) + break; + + if (txq_id > IWL_MVM_LAST_AGG_QUEUE) { + IWL_ERR(mvm, "Failed to allocate agg queue\n"); + return -EIO; + } + + /* the new tx queue is still connected to the same mac80211 queue */ + mvm->queue_to_mac80211[txq_id] = vif->hw_queue[tid_to_ac[tid]]; + + spin_lock_bh(&mvmsta->lock); + tid_data = &mvmsta->tid_data[tid]; + tid_data->ssn = SEQ_TO_SN(tid_data->seq_number); + tid_data->txq_id = txq_id; + *ssn = tid_data->ssn; + + IWL_DEBUG_TX_QUEUES(mvm, + "Start AGG: sta %d tid %d queue %d - ssn = %d, next_recl = %d\n", + mvmsta->sta_id, tid, txq_id, tid_data->ssn, + tid_data->next_reclaimed); + + if (tid_data->ssn == tid_data->next_reclaimed) { + tid_data->state = IWL_AGG_STARTING; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + } else { + tid_data->state = IWL_EMPTYING_HW_QUEUE_ADDBA; + } + + spin_unlock_bh(&mvmsta->lock); + + return 0; +} + +int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u8 buf_size) +{ + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; + int queue, fifo, ret; + u16 ssn; + + buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF); + + spin_lock_bh(&mvmsta->lock); + ssn = tid_data->ssn; + queue = tid_data->txq_id; + tid_data->state = IWL_AGG_ON; + tid_data->ssn = 0xffff; + spin_unlock_bh(&mvmsta->lock); + + fifo = iwl_mvm_ac_to_tx_fifo[tid_to_ac[tid]]; + + ret = iwl_mvm_sta_tx_agg(mvm, sta, tid, queue, true); + if (ret) + return -EIO; + + iwl_trans_txq_enable(mvm->trans, queue, fifo, mvmsta->sta_id, tid, + buf_size, ssn); + + /* + * Even though in theory the peer could have different + * aggregation reorder buffer sizes for different sessions, + * our ucode doesn't allow for that and has a global limit + * for each station. Therefore, use the minimum of all the + * aggregation sessions and our default value. + */ + mvmsta->max_agg_bufsize = + min(mvmsta->max_agg_bufsize, buf_size); + mvmsta->lq_sta.lq.agg_frame_cnt_limit = mvmsta->max_agg_bufsize; + + if (mvm->cfg->ht_params->use_rts_for_aggregation) { + /* + * switch to RTS/CTS if it is the prefer protection + * method for HT traffic + */ + mvmsta->lq_sta.lq.flags |= LQ_FLAG_SET_STA_TLC_RTS_MSK; + /* + * TODO: remove the TLC_RTS flag when we tear down the last + * AGG session (agg_tids_count in DVM) + */ + } + + IWL_DEBUG_HT(mvm, "Tx aggregation enabled on ra = %pM tid = %d\n", + sta->addr, tid); + + return iwl_mvm_send_lq_cmd(mvm, &mvmsta->lq_sta.lq, CMD_ASYNC, false); +} + +int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid) +{ + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; + u16 txq_id; + int err; + + spin_lock_bh(&mvmsta->lock); + + txq_id = tid_data->txq_id; + + IWL_DEBUG_TX_QUEUES(mvm, "Stop AGG: sta %d tid %d q %d state %d\n", + mvmsta->sta_id, tid, txq_id, tid_data->state); + + switch (tid_data->state) { + case IWL_AGG_ON: + tid_data->ssn = SEQ_TO_SN(tid_data->seq_number); + + IWL_DEBUG_TX_QUEUES(mvm, + "ssn = %d, next_recl = %d\n", + tid_data->ssn, tid_data->next_reclaimed); + + /* There are still packets for this RA / TID in the HW */ + if (tid_data->ssn != tid_data->next_reclaimed) { + tid_data->state = IWL_EMPTYING_HW_QUEUE_DELBA; + err = 0; + break; + } + + tid_data->ssn = 0xffff; + iwl_trans_txq_disable(mvm->trans, txq_id); + /* fall through */ + case IWL_AGG_STARTING: + case IWL_EMPTYING_HW_QUEUE_ADDBA: + /* + * The agg session has been stopped before it was set up. This + * can happen when the AddBA timer times out for example. + */ + + /* No barriers since we are under mutex */ + lockdep_assert_held(&mvm->mutex); + mvm->queue_to_mac80211[txq_id] = IWL_INVALID_MAC80211_QUEUE; + + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + tid_data->state = IWL_AGG_OFF; + err = 0; + break; + default: + IWL_ERR(mvm, + "Stopping AGG while state not ON or starting for %d on %d (%d)\n", + mvmsta->sta_id, tid, tid_data->state); + IWL_ERR(mvm, + "\ttid_data->txq_id = %d\n", tid_data->txq_id); + err = -EINVAL; + } + + spin_unlock_bh(&mvmsta->lock); + + return err; +} + +static int iwl_mvm_set_fw_key_idx(struct iwl_mvm *mvm) +{ + int i; + + lockdep_assert_held(&mvm->mutex); + + i = find_first_zero_bit(mvm->fw_key_table, STA_KEY_MAX_NUM); + + if (i == STA_KEY_MAX_NUM) + return STA_KEY_IDX_INVALID; + + __set_bit(i, mvm->fw_key_table); + + return i; +} + +static u8 iwl_mvm_get_key_sta_id(struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_mvm_vif *mvmvif = (void *)vif->drv_priv; + + if (sta) { + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + + return mvm_sta->sta_id; + } + + /* + * The device expects GTKs for station interfaces to be + * installed as GTKs for the AP station. If we have no + * station ID, then use AP's station ID. + */ + if (vif->type == NL80211_IFTYPE_STATION && + mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) + return mvmvif->ap_sta_id; + + return IWL_INVALID_STATION; +} + +static int iwl_mvm_send_sta_key(struct iwl_mvm *mvm, + struct iwl_mvm_sta *mvm_sta, + struct ieee80211_key_conf *keyconf, + u8 sta_id, u32 tkip_iv32, u16 *tkip_p1k, + u32 cmd_flags) +{ + __le16 key_flags; + struct iwl_mvm_add_sta_cmd cmd = {}; + int ret, status; + u16 keyidx; + int i; + + keyidx = (keyconf->keyidx << STA_KEY_FLG_KEYID_POS) & + STA_KEY_FLG_KEYID_MSK; + key_flags = cpu_to_le16(keyidx); + key_flags |= cpu_to_le16(STA_KEY_FLG_WEP_KEY_MAP); + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + key_flags |= cpu_to_le16(STA_KEY_FLG_TKIP); + cmd.key.tkip_rx_tsc_byte2 = tkip_iv32; + for (i = 0; i < 5; i++) + cmd.key.tkip_rx_ttak[i] = cpu_to_le16(tkip_p1k[i]); + memcpy(cmd.key.key, keyconf->key, keyconf->keylen); + break; + case WLAN_CIPHER_SUITE_CCMP: + key_flags |= cpu_to_le16(STA_KEY_FLG_CCM); + memcpy(cmd.key.key, keyconf->key, keyconf->keylen); + break; + default: + WARN_ON(1); + return -EINVAL; + } + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= cpu_to_le16(STA_KEY_MULTICAST); + + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); + cmd.key.key_offset = keyconf->hw_key_idx; + cmd.key.key_flags = key_flags; + cmd.add_modify = STA_MODE_MODIFY; + cmd.modify_mask = STA_MODIFY_KEY; + cmd.sta_id = sta_id; + + status = ADD_STA_SUCCESS; + if (cmd_flags == CMD_SYNC) + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd), + &cmd, &status); + else + ret = iwl_mvm_send_cmd_pdu(mvm, ADD_STA, CMD_ASYNC, + sizeof(cmd), &cmd); + + switch (status) { + case ADD_STA_SUCCESS: + IWL_DEBUG_WEP(mvm, "MODIFY_STA: set dynamic key passed\n"); + break; + default: + ret = -EIO; + IWL_ERR(mvm, "MODIFY_STA: set dynamic key failed\n"); + break; + } + + return ret; +} + +static int iwl_mvm_send_sta_igtk(struct iwl_mvm *mvm, + struct ieee80211_key_conf *keyconf, + u8 sta_id, bool remove_key) +{ + struct iwl_mvm_mgmt_mcast_key_cmd igtk_cmd = {}; + + /* verify the key details match the required command's expectations */ + if (WARN_ON((keyconf->cipher != WLAN_CIPHER_SUITE_AES_CMAC) || + (keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE) || + (keyconf->keyidx != 4 && keyconf->keyidx != 5))) + return -EINVAL; + + igtk_cmd.key_id = cpu_to_le32(keyconf->keyidx); + igtk_cmd.sta_id = cpu_to_le32(sta_id); + + if (remove_key) { + igtk_cmd.ctrl_flags |= cpu_to_le32(STA_KEY_NOT_VALID); + } else { + struct ieee80211_key_seq seq; + const u8 *pn; + + memcpy(igtk_cmd.IGTK, keyconf->key, keyconf->keylen); + ieee80211_aes_cmac_calculate_k1_k2(keyconf, + igtk_cmd.K1, igtk_cmd.K2); + ieee80211_get_key_rx_seq(keyconf, 0, &seq); + pn = seq.aes_cmac.pn; + igtk_cmd.receive_seq_cnt = cpu_to_le64(((u64) pn[5] << 0) | + ((u64) pn[4] << 8) | + ((u64) pn[3] << 16) | + ((u64) pn[2] << 24) | + ((u64) pn[1] << 32) | + ((u64) pn[0] << 40)); + } + + IWL_DEBUG_INFO(mvm, "%s igtk for sta %u\n", + remove_key ? "removing" : "installing", + igtk_cmd.sta_id); + + return iwl_mvm_send_cmd_pdu(mvm, MGMT_MCAST_KEY, CMD_SYNC, + sizeof(igtk_cmd), &igtk_cmd); +} + + +static inline u8 *iwl_mvm_get_mac_addr(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_mvm_vif *mvmvif = (void *)vif->drv_priv; + + if (sta) + return sta->addr; + + if (vif->type == NL80211_IFTYPE_STATION && + mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { + u8 sta_id = mvmvif->ap_sta_id; + sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + return sta->addr; + } + + + return NULL; +} + +int iwl_mvm_set_sta_key(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *keyconf, + bool have_key_offset) +{ + struct iwl_mvm_sta *mvm_sta; + int ret; + u8 *addr, sta_id; + struct ieee80211_key_seq seq; + u16 p1k[5]; + + lockdep_assert_held(&mvm->mutex); + + /* Get the station id from the mvm local station table */ + sta_id = iwl_mvm_get_key_sta_id(vif, sta); + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(mvm, "Failed to find station id\n"); + return -EINVAL; + } + + if (keyconf->cipher == WLAN_CIPHER_SUITE_AES_CMAC) { + ret = iwl_mvm_send_sta_igtk(mvm, keyconf, sta_id, false); + goto end; + } + + /* + * It is possible that the 'sta' parameter is NULL, and thus + * there is a need to retrieve the sta from the local station table. + */ + if (!sta) { + sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + if (IS_ERR_OR_NULL(sta)) { + IWL_ERR(mvm, "Invalid station id\n"); + return -EINVAL; + } + } + + mvm_sta = (struct iwl_mvm_sta *)sta->drv_priv; + if (WARN_ON_ONCE(mvm_sta->vif != vif)) + return -EINVAL; + + if (!have_key_offset) { + /* + * The D3 firmware hardcodes the PTK offset to 0, so we have to + * configure it there. As a result, this workaround exists to + * let the caller set the key offset (hw_key_idx), see d3.c. + */ + keyconf->hw_key_idx = iwl_mvm_set_fw_key_idx(mvm); + if (keyconf->hw_key_idx == STA_KEY_IDX_INVALID) + return -ENOSPC; + } + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + addr = iwl_mvm_get_mac_addr(mvm, vif, sta); + /* get phase 1 key from mac80211 */ + ieee80211_get_key_rx_seq(keyconf, 0, &seq); + ieee80211_get_tkip_rx_p1k(keyconf, addr, seq.tkip.iv32, p1k); + ret = iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf, sta_id, + seq.tkip.iv32, p1k, CMD_SYNC); + break; + case WLAN_CIPHER_SUITE_CCMP: + ret = iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf, sta_id, + 0, NULL, CMD_SYNC); + break; + default: + IWL_ERR(mvm, "Unknown cipher %x\n", keyconf->cipher); + ret = -EINVAL; + } + + if (ret) + __clear_bit(keyconf->hw_key_idx, mvm->fw_key_table); + +end: + IWL_DEBUG_WEP(mvm, "key: cipher=%x len=%d idx=%d sta=%pM ret=%d\n", + keyconf->cipher, keyconf->keylen, keyconf->keyidx, + sta->addr, ret); + return ret; +} + +int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *keyconf) +{ + struct iwl_mvm_sta *mvm_sta; + struct iwl_mvm_add_sta_cmd cmd = {}; + __le16 key_flags; + int ret, status; + u8 sta_id; + + lockdep_assert_held(&mvm->mutex); + + /* Get the station id from the mvm local station table */ + sta_id = iwl_mvm_get_key_sta_id(vif, sta); + + IWL_DEBUG_WEP(mvm, "mvm remove dynamic key: idx=%d sta=%d\n", + keyconf->keyidx, sta_id); + + if (keyconf->cipher == WLAN_CIPHER_SUITE_AES_CMAC) + return iwl_mvm_send_sta_igtk(mvm, keyconf, sta_id, true); + + ret = __test_and_clear_bit(keyconf->hw_key_idx, mvm->fw_key_table); + if (!ret) { + IWL_ERR(mvm, "offset %d not used in fw key table.\n", + keyconf->hw_key_idx); + return -ENOENT; + } + + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_WEP(mvm, "station non-existent, early return.\n"); + return 0; + } + + /* + * It is possible that the 'sta' parameter is NULL, and thus + * there is a need to retrieve the sta from the local station table, + * for example when a GTK is removed (where the sta_id will then be + * the AP ID, and no station was passed by mac80211.) + */ + if (!sta) { + sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + if (!sta) { + IWL_ERR(mvm, "Invalid station id\n"); + return -EINVAL; + } + } + + mvm_sta = (struct iwl_mvm_sta *)sta->drv_priv; + if (WARN_ON_ONCE(mvm_sta->vif != vif)) + return -EINVAL; + + key_flags = cpu_to_le16(keyconf->keyidx & STA_KEY_FLG_KEYID_MSK); + key_flags |= cpu_to_le16(STA_KEY_FLG_NO_ENC | STA_KEY_FLG_WEP_KEY_MAP); + key_flags |= cpu_to_le16(STA_KEY_NOT_VALID); + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= cpu_to_le16(STA_KEY_MULTICAST); + + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); + cmd.key.key_flags = key_flags; + cmd.key.key_offset = keyconf->hw_key_idx; + cmd.sta_id = sta_id; + + cmd.modify_mask = STA_MODIFY_KEY; + cmd.add_modify = STA_MODE_MODIFY; + + status = ADD_STA_SUCCESS; + ret = iwl_mvm_send_cmd_pdu_status(mvm, ADD_STA, sizeof(cmd), + &cmd, &status); + + switch (status) { + case ADD_STA_SUCCESS: + IWL_DEBUG_WEP(mvm, "MODIFY_STA: remove sta key passed\n"); + break; + default: + ret = -EIO; + IWL_ERR(mvm, "MODIFY_STA: remove sta key failed\n"); + break; + } + + return ret; +} + +void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, + u16 *phase1key) +{ + struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + u8 sta_id = iwl_mvm_get_key_sta_id(vif, sta); + + if (sta_id == IWL_INVALID_STATION) + return; + + iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf, sta_id, + iv32, phase1key, CMD_ASYNC); +} + +void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id) +{ + struct iwl_mvm_add_sta_cmd cmd = { + .add_modify = STA_MODE_MODIFY, + .sta_id = sta_id, + .modify_mask = STA_MODIFY_SLEEPING_STA_TX_COUNT, + .sleep_state_flags = cpu_to_le16(STA_SLEEP_STATE_AWAKE), + }; + int ret; + + /* + * Same modify mask for sleep_tx_count and sleep_state_flags but this + * should be fine since if we set the STA as "awake", then + * sleep_tx_count is not relevant. + */ + ret = iwl_mvm_send_cmd_pdu(mvm, ADD_STA, CMD_ASYNC, sizeof(cmd), &cmd); + if (ret) + IWL_ERR(mvm, "Failed to send ADD_STA command (%d)\n", ret); +} + +void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, int sta_id, + enum ieee80211_frame_release_type reason, + u16 cnt) +{ + u16 sleep_state_flags = + (reason == IEEE80211_FRAME_RELEASE_UAPSD) ? + STA_SLEEP_STATE_UAPSD : STA_SLEEP_STATE_PS_POLL; + struct iwl_mvm_add_sta_cmd cmd = { + .add_modify = STA_MODE_MODIFY, + .sta_id = sta_id, + .modify_mask = STA_MODIFY_SLEEPING_STA_TX_COUNT, + .sleep_tx_count = cpu_to_le16(cnt), + /* + * Same modify mask for sleep_tx_count and sleep_state_flags so + * we must set the sleep_state_flags too. + */ + .sleep_state_flags = cpu_to_le16(sleep_state_flags), + }; + int ret; + + /* TODO: somehow the fw doesn't seem to take PS_POLL into account */ + ret = iwl_mvm_send_cmd_pdu(mvm, ADD_STA, CMD_ASYNC, sizeof(cmd), &cmd); + if (ret) + IWL_ERR(mvm, "Failed to send ADD_STA command (%d)\n", ret); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h new file mode 100644 index 0000000..1bf3010 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -0,0 +1,368 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __sta_h__ +#define __sta_h__ + +#include +#include +#include + +#include "iwl-trans.h" /* for IWL_MAX_TID_COUNT */ +#include "fw-api.h" /* IWL_MVM_STATION_COUNT */ +#include "rs.h" + +struct iwl_mvm; + +/** + * DOC: station table - introduction + * + * The station table is a list of data structure that reprensent the stations. + * In STA/P2P client mode, the driver will hold one station for the AP/ GO. + * In GO/AP mode, the driver will have as many stations as associated clients. + * All these stations are reflected in the fw's station table. The driver + * keeps the fw's station table up to date with the ADD_STA command. Stations + * can be removed by the REMOVE_STA command. + * + * All the data related to a station is held in the structure %iwl_mvm_sta + * which is embed in the mac80211's %ieee80211_sta (in the drv_priv) area. + * This data includes the index of the station in the fw, per tid information + * (sequence numbers, Block-ack state machine, etc...). The stations are + * created and deleted by the %sta_state callback from %ieee80211_ops. + * + * The driver holds a map: %fw_id_to_mac_id that allows to fetch a + * %ieee80211_sta (and the %iwl_mvm_sta embedded into it) based on a fw + * station index. That way, the driver is able to get the tid related data in + * O(1) in time sensitive paths (Tx / Tx response / BA notification). These + * paths are triggered by the fw, and the driver needs to get a pointer to the + * %ieee80211 structure. This map helps to get that pointer quickly. + */ + +/** + * DOC: station table - locking + * + * As stated before, the station is created / deleted by mac80211's %sta_state + * callback from %ieee80211_ops which can sleep. The next paragraph explains + * the locking of a single stations, the next ones relates to the station + * table. + * + * The station holds the sequence number per tid. So this data needs to be + * accessed in the Tx path (which is softIRQ). It also holds the Block-Ack + * information (the state machine / and the logic that checks if the queues + * were drained), so it also needs to be accessible from the Tx response flow. + * In short, the station needs to be access from sleepable context as well as + * from tasklets, so the station itself needs a spinlock. + * + * The writers of %fw_id_to_mac_id map are serialized by the global mutex of + * the mvm op_mode. This is possible since %sta_state can sleep. + * The pointers in this map are RCU protected, hence we won't replace the + * station while we have Tx / Tx response / BA notification running. + * + * If a station is deleted while it still has packets in its A-MPDU queues, + * then the reclaim flow will notice that there is no station in the map for + * sta_id and it will dump the responses. + */ + +/** + * DOC: station table - internal stations + * + * The FW needs a few internal stations that are not reflected in + * mac80211, such as broadcast station in AP / GO mode, or AUX sta for + * scanning and P2P device (during the GO negotiation). + * For these kind of stations we have %iwl_mvm_int_sta struct which holds the + * data relevant for them from both %iwl_mvm_sta and %ieee80211_sta. + * Usually the data for these stations is static, so no locking is required, + * and no TID data as this is also not needed. + * One thing to note, is that these stations have an ID in the fw, but not + * in mac80211. In order to "reserve" them a sta_id in %fw_id_to_mac_id + * we fill ERR_PTR(EINVAL) in this mapping and all other dereferencing of + * pointers from this mapping need to check that the value is not error + * or NULL. + * + * Currently there is only one auxiliary station for scanning, initialized + * on init. + */ + +/** + * DOC: station table - AP Station in STA mode + * + * %iwl_mvm_vif includes the index of the AP station in the fw's STA table: + * %ap_sta_id. To get the point to the coresponsding %ieee80211_sta, + * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove + * the AP station from the fw before setting the MAC context as unassociated. + * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is + * removed by mac80211, but the station won't be removed in the fw until the + * VIF is set as unassociated. Then, %ap_sta_id will be invalidated. + */ + +/** + * DOC: station table - Drain vs. Flush + * + * Flush means that all the frames in the SCD queue are dumped regardless the + * station to which they were sent. We do that when we disassociate and before + * we remove the STA of the AP. The flush can be done synchronously against the + * fw. + * Drain means that the fw will drop all the frames sent to a specific station. + * This is useful when a client (if we are IBSS / GO or AP) disassociates. In + * that case, we need to drain all the frames for that client from the AC queues + * that are shared with the other clients. Only then, we can remove the STA in + * the fw. In order to do so, we track the non-AMPDU packets for each station. + * If mac80211 removes a STA and if it still has non-AMPDU packets pending in + * the queues, we mark this station as %EBUSY in %fw_id_to_mac_id, and drop all + * the frames for this STA (%iwl_mvm_rm_sta). When the last frame is dropped + * (we know about it with its Tx response), we remove the station in fw and set + * it as %NULL in %fw_id_to_mac_id: this is the purpose of + * %iwl_mvm_sta_drained_wk. + */ + +/** + * DOC: station table - fw restart + * + * When the fw asserts, or we have any other issue that requires to reset the + * driver, we require mac80211 to reconfigure the driver. Since the private + * data of the stations is embed in mac80211's %ieee80211_sta, that data will + * not be zeroed and needs to be reinitialized manually. + * %IWL_MVM_STATUS_IN_HW_RESTART is set during restart and that will hint us + * that we must not allocate a new sta_id but reuse the previous one. This + * means that the stations being re-added after the reset will have the same + * place in the fw as before the reset. We do need to zero the %fw_id_to_mac_id + * map, since the stations aren't in the fw any more. Internal stations that + * are not added by mac80211 will be re-added in the init flow that is called + * after the restart: mac80211 call's %iwl_mvm_mac_start which calls to + * %iwl_mvm_up. + */ + +/** + * DOC: AP mode - PS + * + * When a station is asleep, the fw will set it as "asleep". All the + * non-aggregation frames to that station will be dropped by the fw + * (%TX_STATUS_FAIL_DEST_PS failure code). + * AMPDUs are in a separate queue that is stopped by the fw. We just need to + * let mac80211 know how many frames we have in these queues so that it can + * properly handle trigger frames. + * When the a trigger frame is received, mac80211 tells the driver to send + * frames from the AMPDU queues or AC queue depending on which queue are + * delivery-enabled and what TID has frames to transmit (Note that mac80211 has + * all the knowledege since all the non-agg frames are buffered / filtered, and + * the driver tells mac80211 about agg frames). The driver needs to tell the fw + * to let frames out even if the station is asleep. This is done by + * %iwl_mvm_sta_modify_sleep_tx_count. + * When we receive a frame from that station with PM bit unset, the + * driver needs to let the fw know that this station isn't alseep any more. + * This is done by %iwl_mvm_sta_modify_ps_wake. + * + * TODO - EOSP handling + */ + +/** + * enum iwl_mvm_agg_state + * + * The state machine of the BA agreement establishment / tear down. + * These states relate to a specific RA / TID. + * + * @IWL_AGG_OFF: aggregation is not used + * @IWL_AGG_STARTING: aggregation are starting (between start and oper) + * @IWL_AGG_ON: aggregation session is up + * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the + * HW queue to be empty from packets for this RA /TID. + * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the + * HW queue to be empty from packets for this RA /TID. + */ +enum iwl_mvm_agg_state { + IWL_AGG_OFF = 0, + IWL_AGG_STARTING, + IWL_AGG_ON, + IWL_EMPTYING_HW_QUEUE_ADDBA, + IWL_EMPTYING_HW_QUEUE_DELBA, +}; + +/** + * struct iwl_mvm_tid_data - holds the states for each RA / TID + * @seq_number: the next WiFi sequence number to use + * @next_reclaimed: the WiFi sequence number of the next packet to be acked. + * This is basically (last acked packet++). + * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the + * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA). + * @state: state of the BA agreement establishment / tear down. + * @txq_id: Tx queue used by the BA session + * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or + * the first packet to be sent in legacy HW queue in Tx AGG stop flow. + * Basically when next_reclaimed reaches ssn, we can tell mac80211 that + * we are ready to finish the Tx AGG stop / start flow. + * @wait_for_ba: Expect block-ack before next Tx reply + */ +struct iwl_mvm_tid_data { + u16 seq_number; + u16 next_reclaimed; + /* The rest is Tx AGG related */ + u32 rate_n_flags; + enum iwl_mvm_agg_state state; + u16 txq_id; + u16 ssn; + bool wait_for_ba; +}; + +/** + * struct iwl_mvm_sta - representation of a station in the driver + * @sta_id: the index of the station in the fw (will be replaced by id_n_color) + * @tfd_queue_msk: the tfd queues used by the station + * @mac_id_n_color: the MAC context this station is linked to + * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for + * tid. + * @max_agg_bufsize: the maximal size of the AGG buffer for this station + * @lock: lock to protect the whole struct. Since %tid_data is access from Tx + * and from Tx response flow, it needs a spinlock. + * @pending_frames: number of frames for this STA on the shared Tx queues. + * @tid_data: per tid data. Look at %iwl_mvm_tid_data. + * + * When mac80211 creates a station it reserves some space (hw->sta_data_size) + * in the structure for use by driver. This structure is placed in that + * space. + * + */ +struct iwl_mvm_sta { + u32 sta_id; + u32 tfd_queue_msk; + u32 mac_id_n_color; + u16 tid_disable_agg; + u8 max_agg_bufsize; + spinlock_t lock; + atomic_t pending_frames; + struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT]; + struct iwl_lq_sta lq_sta; + struct ieee80211_vif *vif; + +#ifdef CONFIG_PM_SLEEP + u16 last_seq_ctl; +#endif +}; + +/** + * struct iwl_mvm_int_sta - representation of an internal station (auxiliary or + * broadcast) + * @sta_id: the index of the station in the fw (will be replaced by id_n_color) + * @tfd_queue_msk: the tfd queues used by the station + */ +struct iwl_mvm_int_sta { + u32 sta_id; + u32 tfd_queue_msk; +}; + +int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta); +int iwl_mvm_add_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); +int iwl_mvm_rm_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); +int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u8 sta_id); +int iwl_mvm_set_sta_key(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key, + bool have_key_offset); +int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *keyconf); + +void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, + u16 *phase1key); + +/* AMPDU */ +int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + int tid, u16 ssn, bool start); +int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 *ssn); +int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u8 buf_size); +int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid); + +int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm); +int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta, + u32 qmask); +void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, + struct iwl_mvm_int_sta *sta); +int iwl_mvm_send_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_mvm_int_sta *bsta); +int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, + struct iwl_mvm_int_sta *bsta); +int iwl_mvm_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + struct iwl_mvm_int_sta *bsta); +int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *bsta); +void iwl_mvm_sta_drained_wk(struct work_struct *wk); +void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id); +void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, int sta_id, + enum ieee80211_frame_release_type reason, + u16 cnt); +int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, + bool drain); + +#endif /* __sta_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c new file mode 100644 index 0000000..b9f076f --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -0,0 +1,569 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include +#include + +#include "iwl-notif-wait.h" +#include "iwl-trans.h" +#include "fw-api.h" +#include "time-event.h" +#include "mvm.h" +#include "iwl-io.h" +#include "iwl-prph.h" + +/* A TimeUnit is 1024 microsecond */ +#define TU_TO_JIFFIES(_tu) (usecs_to_jiffies((_tu) * 1024)) +#define MSEC_TO_TU(_msec) (_msec*1000/1024) + +void iwl_mvm_te_clear_data(struct iwl_mvm *mvm, + struct iwl_mvm_time_event_data *te_data) +{ + lockdep_assert_held(&mvm->time_event_lock); + + if (te_data->id == TE_MAX) + return; + + list_del(&te_data->list); + te_data->running = false; + te_data->uid = 0; + te_data->id = TE_MAX; + te_data->vif = NULL; +} + +void iwl_mvm_roc_done_wk(struct work_struct *wk) +{ + struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm, roc_done_wk); + + synchronize_net(); + + /* + * Flush the offchannel queue -- this is called when the time + * event finishes or is cancelled, so that frames queued for it + * won't get stuck on the queue and be transmitted in the next + * time event. + * We have to send the command asynchronously since this cannot + * be under the mutex for locking reasons, but that's not an + * issue as it will have to complete before the next command is + * executed, and a new time event means a new command. + */ + iwl_mvm_flush_tx_path(mvm, BIT(IWL_OFFCHANNEL_QUEUE), false); +} + +static void iwl_mvm_roc_finished(struct iwl_mvm *mvm) +{ + /* + * First, clear the ROC_RUNNING status bit. This will cause the TX + * path to drop offchannel transmissions. That would also be done + * by mac80211, but it is racy, in particular in the case that the + * time event actually completed in the firmware (which is handled + * in iwl_mvm_te_handle_notif). + */ + clear_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status); + + /* + * Of course, our status bit is just as racy as mac80211, so in + * addition, fire off the work struct which will drop all frames + * from the hardware queues that made it through the race. First + * it will of course synchronize the TX path to make sure that + * any *new* TX will be rejected. + */ + schedule_work(&mvm->roc_done_wk); +} + +/* + * Handles a FW notification for an event that is known to the driver. + * + * @mvm: the mvm component + * @te_data: the time event data + * @notif: the notification data corresponding the time event data. + */ +static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, + struct iwl_mvm_time_event_data *te_data, + struct iwl_time_event_notif *notif) +{ + lockdep_assert_held(&mvm->time_event_lock); + + IWL_DEBUG_TE(mvm, "Handle time event notif - UID = 0x%x action %d\n", + le32_to_cpu(notif->unique_id), + le32_to_cpu(notif->action)); + + /* + * The FW sends the start/end time event notifications even for events + * that it fails to schedule. This is indicated in the status field of + * the notification. This happens in cases that the scheduler cannot + * find a schedule that can handle the event (for example requesting a + * P2P Device discoveribility, while there are other higher priority + * events in the system). + */ + WARN_ONCE(!le32_to_cpu(notif->status), + "Failed to schedule time event\n"); + + if (le32_to_cpu(notif->action) == TE_NOTIF_HOST_END) { + IWL_DEBUG_TE(mvm, + "TE ended - current time %lu, estimated end %lu\n", + jiffies, te_data->end_jiffies); + + if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) { + ieee80211_remain_on_channel_expired(mvm->hw); + iwl_mvm_roc_finished(mvm); + } + + /* + * By now, we should have finished association + * and know the dtim period. + */ + if (te_data->vif->type == NL80211_IFTYPE_STATION && + (!te_data->vif->bss_conf.assoc || + !te_data->vif->bss_conf.dtim_period)) + IWL_ERR(mvm, + "No assocation and the time event is over already...\n"); + + iwl_mvm_te_clear_data(mvm, te_data); + } else if (le32_to_cpu(notif->action) == TE_NOTIF_HOST_START) { + te_data->running = true; + te_data->end_jiffies = jiffies + + TU_TO_JIFFIES(te_data->duration); + + if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) { + set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status); + ieee80211_ready_on_channel(mvm->hw); + } + } else { + IWL_WARN(mvm, "Got TE with unknown action\n"); + } +} + +/* + * The Rx handler for time event notifications + */ +int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_time_event_notif *notif = (void *)pkt->data; + struct iwl_mvm_time_event_data *te_data, *tmp; + + IWL_DEBUG_TE(mvm, "Time event notification - UID = 0x%x action %d\n", + le32_to_cpu(notif->unique_id), + le32_to_cpu(notif->action)); + + spin_lock_bh(&mvm->time_event_lock); + list_for_each_entry_safe(te_data, tmp, &mvm->time_event_list, list) { + if (le32_to_cpu(notif->unique_id) == te_data->uid) + iwl_mvm_te_handle_notif(mvm, te_data, notif); + } + spin_unlock_bh(&mvm->time_event_lock); + + return 0; +} + +static bool iwl_mvm_time_event_notif(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_mvm *mvm = + container_of(notif_wait, struct iwl_mvm, notif_wait); + struct iwl_mvm_time_event_data *te_data = data; + struct ieee80211_vif *vif = te_data->vif; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_time_event_notif *notif; + struct iwl_time_event_resp *resp; + + u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); + + /* until we do something else */ + WARN_ON(te_data->id != TE_BSS_STA_AGGRESSIVE_ASSOC); + + switch (pkt->hdr.cmd) { + case TIME_EVENT_CMD: + resp = (void *)pkt->data; + /* TODO: I can't check that since the fw is buggy - it doesn't + * put the right values when we remove a TE. We can be here + * when we remove a TE because the remove TE command is sent in + * ASYNC... + * WARN_ON(mac_id_n_color != le32_to_cpu(resp->id_and_color)); + */ + te_data->uid = le32_to_cpu(resp->unique_id); + IWL_DEBUG_TE(mvm, "Got response - UID = 0x%x\n", te_data->uid); + return false; + + case TIME_EVENT_NOTIFICATION: + notif = (void *)pkt->data; + WARN_ON(le32_to_cpu(notif->status) != 1); + WARN_ON(mac_id_n_color != le32_to_cpu(notif->id_and_color)); + /* check if this is our Time Event that is starting */ + if (le32_to_cpu(notif->unique_id) != te_data->uid) + return false; + IWL_DEBUG_TE(mvm, "Event %d is starting - time is %d\n", + te_data->uid, le32_to_cpu(notif->timestamp)); + + WARN_ONCE(!le32_to_cpu(notif->status), + "Failed to schedule protected session TE\n"); + + te_data->running = true; + te_data->end_jiffies = jiffies + + TU_TO_JIFFIES(te_data->duration); + return true; + + default: + WARN_ON(1); + return false; + }; +} + +void iwl_mvm_protect_session(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 duration, u32 min_duration) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; + static const u8 time_event_notif[] = { TIME_EVENT_CMD, + TIME_EVENT_NOTIFICATION }; + struct iwl_notification_wait wait_time_event; + struct iwl_time_event_cmd time_cmd = {}; + int ret; + + lockdep_assert_held(&mvm->mutex); + + if (te_data->running && + time_after(te_data->end_jiffies, + jiffies + TU_TO_JIFFIES(min_duration))) { + IWL_DEBUG_TE(mvm, "We have enough time in the current TE: %u\n", + jiffies_to_msecs(te_data->end_jiffies - jiffies)); + return; + } + + if (te_data->running) { + IWL_DEBUG_TE(mvm, "extend 0x%x: only %u ms left\n", + te_data->uid, + jiffies_to_msecs(te_data->end_jiffies - jiffies)); + /* + * we don't have enough time + * cancel the current TE and issue a new one + * Of course it would be better to remove the old one only + * when the new one is added, but we don't care if we are off + * channel for a bit. All we need to do, is not to return + * before we actually begin to be on the channel. + */ + iwl_mvm_stop_session_protection(mvm, vif); + } + + iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, + time_event_notif, + ARRAY_SIZE(time_event_notif), + iwl_mvm_time_event_notif, + &mvmvif->time_event_data); + + time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); + time_cmd.id_and_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); + time_cmd.id = cpu_to_le32(TE_BSS_STA_AGGRESSIVE_ASSOC); + + time_cmd.apply_time = + cpu_to_le32(iwl_read_prph(mvm->trans, DEVICE_SYSTEM_TIME_REG)); + time_cmd.dep_policy = TE_INDEPENDENT; + time_cmd.is_present = cpu_to_le32(1); + time_cmd.max_frags = cpu_to_le32(TE_FRAG_NONE); + time_cmd.max_delay = cpu_to_le32(500); + /* TODO: why do we need to interval = bi if it is not periodic? */ + time_cmd.interval = cpu_to_le32(1); + time_cmd.interval_reciprocal = cpu_to_le32(iwl_mvm_reciprocal(1)); + time_cmd.duration = cpu_to_le32(duration); + time_cmd.repeat = cpu_to_le32(1); + time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_START | TE_NOTIF_HOST_END); + + te_data->vif = vif; + te_data->duration = duration; + + spin_lock_bh(&mvm->time_event_lock); + te_data->id = le32_to_cpu(time_cmd.id); + list_add_tail(&te_data->list, &mvm->time_event_list); + spin_unlock_bh(&mvm->time_event_lock); + + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, + sizeof(time_cmd), &time_cmd); + if (ret) { + IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); + goto out_remove_notif; + } + + ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1 * HZ); + if (ret) { + IWL_ERR(mvm, "%s - failed on timeout\n", __func__); + spin_lock_bh(&mvm->time_event_lock); + iwl_mvm_te_clear_data(mvm, te_data); + spin_unlock_bh(&mvm->time_event_lock); + } + + return; + +out_remove_notif: + iwl_remove_notification(&mvm->notif_wait, &wait_time_event); +} + +/* + * Explicit request to remove a time event. The removal of a time event needs to + * be synchronized with the flow of a time event's end notification, which also + * removes the time event from the op mode data structures. + */ +void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, + struct iwl_mvm_vif *mvmvif, + struct iwl_mvm_time_event_data *te_data) +{ + struct iwl_time_event_cmd time_cmd = {}; + u32 id, uid; + int ret; + + /* + * It is possible that by the time we got to this point the time + * event was already removed. + */ + spin_lock_bh(&mvm->time_event_lock); + + /* Save time event uid before clearing its data */ + uid = te_data->uid; + id = te_data->id; + + /* + * The clear_data function handles time events that were already removed + */ + iwl_mvm_te_clear_data(mvm, te_data); + spin_unlock_bh(&mvm->time_event_lock); + + /* + * It is possible that by the time we try to remove it, the time event + * has already ended and removed. In such a case there is no need to + * send a removal command. + */ + if (id == TE_MAX) { + IWL_DEBUG_TE(mvm, "TE 0x%x has already ended\n", uid); + return; + } + + /* When we remove a TE, the UID is to be set in the id field */ + time_cmd.id = cpu_to_le32(uid); + time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_REMOVE); + time_cmd.id_and_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); + + IWL_DEBUG_TE(mvm, "Removing TE 0x%x\n", le32_to_cpu(time_cmd.id)); + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_ASYNC, + sizeof(time_cmd), &time_cmd); + if (WARN_ON(ret)) + return; +} + +void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; + + lockdep_assert_held(&mvm->mutex); + iwl_mvm_remove_time_event(mvm, mvmvif, te_data); +} + +static bool iwl_mvm_roc_te_notif(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_mvm *mvm = + container_of(notif_wait, struct iwl_mvm, notif_wait); + struct iwl_mvm_time_event_data *te_data = data; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); + struct iwl_time_event_resp *resp; + + u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); + + /* until we do something else */ + WARN_ON(te_data->id != TE_P2P_DEVICE_DISCOVERABLE); + + switch (pkt->hdr.cmd) { + case TIME_EVENT_CMD: + resp = (void *)pkt->data; + WARN_ON(mac_id_n_color != le32_to_cpu(resp->id_and_color)); + te_data->uid = le32_to_cpu(resp->unique_id); + IWL_DEBUG_TE(mvm, "Got response - UID = 0x%x\n", te_data->uid); + return true; + + default: + WARN_ON(1); + return false; + }; +} + +int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + int duration) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; + static const u8 roc_te_notif[] = { TIME_EVENT_CMD }; + struct iwl_notification_wait wait_time_event; + struct iwl_time_event_cmd time_cmd = {}; + int ret; + + lockdep_assert_held(&mvm->mutex); + if (te_data->running) { + IWL_WARN(mvm, "P2P_DEVICE remain on channel already running\n"); + return -EBUSY; + } + + /* + * Flush the done work, just in case it's still pending, so that + * the work it does can complete and we can accept new frames. + */ + flush_work(&mvm->roc_done_wk); + + iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, + roc_te_notif, + ARRAY_SIZE(roc_te_notif), + iwl_mvm_roc_te_notif, + &mvmvif->time_event_data); + + time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); + time_cmd.id_and_color = + cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); + time_cmd.id = cpu_to_le32(TE_P2P_DEVICE_DISCOVERABLE); + + time_cmd.apply_time = cpu_to_le32(0); + time_cmd.dep_policy = cpu_to_le32(TE_INDEPENDENT); + time_cmd.is_present = cpu_to_le32(1); + + time_cmd.interval = cpu_to_le32(1); + + /* + * TE_P2P_DEVICE_DISCOVERABLE can have lower priority than other events + * that are being scheduled by the driver/fw, and thus it might not be + * scheduled. To improve the chances of it being scheduled, allow it to + * be fragmented. + * In addition, for the same reasons, allow to delay the scheduling of + * the time event. + */ + time_cmd.max_frags = cpu_to_le32(MSEC_TO_TU(duration)/20); + time_cmd.max_delay = cpu_to_le32(MSEC_TO_TU(duration/2)); + time_cmd.duration = cpu_to_le32(MSEC_TO_TU(duration)); + time_cmd.repeat = cpu_to_le32(1); + time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_START | TE_NOTIF_HOST_END); + + /* Push the te data to the tracked te list */ + te_data->vif = vif; + te_data->duration = MSEC_TO_TU(duration); + + spin_lock_bh(&mvm->time_event_lock); + te_data->id = le32_to_cpu(time_cmd.id); + list_add_tail(&te_data->list, &mvm->time_event_list); + spin_unlock_bh(&mvm->time_event_lock); + + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, + sizeof(time_cmd), &time_cmd); + if (ret) { + IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); + goto out_remove_notif; + } + + ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1 * HZ); + if (ret) { + IWL_ERR(mvm, "%s - failed on timeout\n", __func__); + iwl_mvm_te_clear_data(mvm, te_data); + } + + return ret; + +out_remove_notif: + iwl_remove_notification(&mvm->notif_wait, &wait_time_event); + return ret; +} + +void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm) +{ + struct iwl_mvm_vif *mvmvif; + struct iwl_mvm_time_event_data *te_data; + + lockdep_assert_held(&mvm->mutex); + + /* + * Iterate over the list of time events and find the time event that is + * associated with a P2P_DEVICE interface. + * This assumes that a P2P_DEVICE interface can have only a single time + * event at any given time and this time event coresponds to a ROC + * request + */ + mvmvif = NULL; + spin_lock_bh(&mvm->time_event_lock); + list_for_each_entry(te_data, &mvm->time_event_list, list) { + if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) { + mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); + break; + } + } + spin_unlock_bh(&mvm->time_event_lock); + + if (!mvmvif) { + IWL_WARN(mvm, "P2P_DEVICE no remain on channel event\n"); + return; + } + + iwl_mvm_remove_time_event(mvm, mvmvif, te_data); + + iwl_mvm_roc_finished(mvm); +} diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.h b/drivers/net/wireless/iwlwifi/mvm/time-event.h new file mode 100644 index 0000000..64fb57a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.h @@ -0,0 +1,214 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __time_event_h__ +#define __time_event_h__ + +#include "fw-api.h" + +#include "mvm.h" + +/** + * DOC: Time Events - what is it? + * + * Time Events are a fw feature that allows the driver to control the presence + * of the device on the channel. Since the fw supports multiple channels + * concurrently, the fw may choose to jump to another channel at any time. + * In order to make sure that the fw is on a specific channel at a certain time + * and for a certain duration, the driver needs to issue a time event. + * + * The simplest example is for BSS association. The driver issues a time event, + * waits for it to start, and only then tells mac80211 that we can start the + * association. This way, we make sure that the association will be done + * smoothly and won't be interrupted by channel switch decided within the fw. + */ + + /** + * DOC: The flow against the fw + * + * When the driver needs to make sure we are in a certain channel, at a certain + * time and for a certain duration, it sends a Time Event. The flow against the + * fw goes like this: + * 1) Driver sends a TIME_EVENT_CMD to the fw + * 2) Driver gets the response for that command. This response contains the + * Unique ID (UID) of the event. + * 3) The fw sends notification when the event starts. + * + * Of course the API provides various options that allow to cover parameters + * of the flow. + * What is the duration of the event? + * What is the start time of the event? + * Is there an end-time for the event? + * How much can the event be delayed? + * Can the event be split? + * If yes what is the maximal number of chunks? + * etc... + */ + +/** + * DOC: Abstraction to the driver + * + * In order to simplify the use of time events to the rest of the driver, + * we abstract the use of time events. This component provides the functions + * needed by the driver. + */ + +#define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 500 +#define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400 + +/** + * iwl_mvm_protect_session - start / extend the session protection. + * @mvm: the mvm component + * @vif: the virtual interface for which the session is issued + * @duration: the duration of the session in TU. + * @min_duration: will start a new session if the current session will end + * in less than min_duration. + * + * This function can be used to start a session protection which means that the + * fw will stay on the channel for %duration_ms milliseconds. This function + * will block (sleep) until the session starts. This function can also be used + * to extend a currently running session. + * This function is meant to be used for BSS association for example, where we + * want to make sure that the fw stays on the channel during the association. + */ +void iwl_mvm_protect_session(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + u32 duration, u32 min_duration); + +/** + * iwl_mvm_stop_session_protection - cancel the session protection. + * @mvm: the mvm component + * @vif: the virtual interface for which the session is issued + * + * This functions cancels the session protection which is an act of good + * citizenship. If it is not needed any more it should be cancelled because + * the other bindings wait for the medium during that time. + * This funtions doesn't sleep. + */ +void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm, + struct ieee80211_vif *vif); + +/* + * iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION. + */ +int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + +/** + * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionlity + * @mvm: the mvm component + * @vif: the virtual interface for which the roc is requested. It is assumed + * that the vif type is NL80211_IFTYPE_P2P_DEVICE + * @duration: the requested duration in millisecond for the fw to be on the + * channel that is bound to the vif. + * + * This function can be used to issue a remain on channel session, + * which means that the fw will stay in the channel for the request %duration + * milliseconds. The function is async, meaning that it only issues the ROC + * request but does not wait for it to start. Once the FW is ready to serve the + * ROC request, it will issue a notification to the driver that it is on the + * requested channel. Once the FW completes the ROC request it will issue + * another notification to the driver. + */ +int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + int duration); + +/** + * iwl_mvm_stop_p2p_roc - stop remain on channel for p2p device functionlity + * @mvm: the mvm component + * + * This function can be used to cancel an ongoing ROC session. + * The function is async, it will instruct the FW to stop serving the ROC + * session, but will not wait for the actual stopping of the session. + */ +void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm); + +/** + * iwl_mvm_remove_time_event - general function to clean up of time event + * @mvm: the mvm component + * @vif: the vif to which the time event belongs + * @te_data: the time event data that corresponds to that time event + * + * This function can be used to cancel a time event regardless its type. + * It is useful for cleaning up time events running before removing an + * interface. + */ +void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, + struct iwl_mvm_vif *mvmvif, + struct iwl_mvm_time_event_data *te_data); + +/** + * iwl_mvm_te_clear_data - remove time event from list + * @mvm: the mvm component + * @te_data: the time event data to remove + * + * This function is mostly internal, it is made available here only + * for firmware restart purposes. + */ +void iwl_mvm_te_clear_data(struct iwl_mvm *mvm, + struct iwl_mvm_time_event_data *te_data); + +void iwl_mvm_roc_done_wk(struct work_struct *wk); + +#endif /* __time_event_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c new file mode 100644 index 0000000..cada8ef --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -0,0 +1,916 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include +#include + +#include "iwl-trans.h" +#include "iwl-eeprom-parse.h" +#include "mvm.h" +#include "sta.h" + +/* + * Sets most of the Tx cmd's fields + */ +static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb, + struct iwl_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, u8 sta_id) +{ + struct ieee80211_hdr *hdr = (void *)skb->data; + __le16 fc = hdr->frame_control; + u32 tx_flags = le32_to_cpu(tx_cmd->tx_flags); + u32 len = skb->len + FCS_LEN; + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) + tx_flags |= TX_CMD_FLG_ACK; + else + tx_flags &= ~TX_CMD_FLG_ACK; + + if (ieee80211_is_probe_resp(fc)) + tx_flags |= TX_CMD_FLG_TSF; + else if (ieee80211_is_back_req(fc)) + tx_flags |= TX_CMD_FLG_ACK | TX_CMD_FLG_BAR; + + /* High prio packet (wrt. BT coex) if it is EAPOL, MCAST or MGMT */ + if (info->band == IEEE80211_BAND_2GHZ && + (skb->protocol == cpu_to_be16(ETH_P_PAE) || + is_multicast_ether_addr(hdr->addr1) || + ieee80211_is_back_req(fc) || + ieee80211_is_mgmt(fc))) + tx_flags |= TX_CMD_FLG_BT_DIS; + + if (ieee80211_has_morefrags(fc)) + tx_flags |= TX_CMD_FLG_MORE_FRAG; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tx_cmd->tid_tspec = qc[0] & 0xf; + tx_flags &= ~TX_CMD_FLG_SEQ_CTL; + } else { + tx_cmd->tid_tspec = IWL_TID_NON_QOS; + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + tx_flags |= TX_CMD_FLG_SEQ_CTL; + else + tx_flags &= ~TX_CMD_FLG_SEQ_CTL; + } + + if (ieee80211_is_mgmt(fc)) { + if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) + tx_cmd->pm_frame_timeout = cpu_to_le16(3); + else + tx_cmd->pm_frame_timeout = cpu_to_le16(2); + + /* The spec allows Action frames in A-MPDU, we don't support + * it + */ + WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_AMPDU); + } else { + tx_cmd->pm_frame_timeout = 0; + } + + if (info->flags & IEEE80211_TX_CTL_AMPDU) + tx_flags |= TX_CMD_FLG_PROT_REQUIRE; + + if (ieee80211_is_data(fc) && len > mvm->rts_threshold && + !is_multicast_ether_addr(ieee80211_get_DA(hdr))) + tx_flags |= TX_CMD_FLG_PROT_REQUIRE; + + tx_cmd->driver_txop = 0; + tx_cmd->tx_flags = cpu_to_le32(tx_flags); + /* Total # bytes to be transmitted */ + tx_cmd->len = cpu_to_le16((u16)skb->len); + tx_cmd->next_frame_len = 0; + tx_cmd->life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); + tx_cmd->sta_id = sta_id; +} + +/* + * Sets the fields in the Tx cmd that are rate related + */ +static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm, + struct iwl_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + __le16 fc) +{ + u32 rate_flags; + int rate_idx; + u8 rate_plcp; + + /* Set retry limit on RTS packets */ + tx_cmd->rts_retry_limit = IWL_RTS_DFAULT_RETRY_LIMIT; + + /* Set retry limit on DATA packets and Probe Responses*/ + if (ieee80211_is_probe_resp(fc)) { + tx_cmd->data_retry_limit = IWL_MGMT_DFAULT_RETRY_LIMIT; + tx_cmd->rts_retry_limit = + min(tx_cmd->data_retry_limit, tx_cmd->rts_retry_limit); + } else if (ieee80211_is_back_req(fc)) { + tx_cmd->data_retry_limit = IWL_BAR_DFAULT_RETRY_LIMIT; + } else { + tx_cmd->data_retry_limit = IWL_DEFAULT_TX_RETRY; + } + + /* + * for data packets, rate info comes from the table inside he fw. This + * table is controlled by LINK_QUALITY commands + */ + + if (ieee80211_is_data(fc)) { + tx_cmd->initial_rate_index = 0; + tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); + return; + } else if (ieee80211_is_back_req(fc)) { + tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); + } + + /* HT rate doesn't make sense for a non data frame */ + WARN_ONCE(info->control.rates[0].flags & IEEE80211_TX_RC_MCS, + "Got an HT rate for a non data frame 0x%x\n", + info->control.rates[0].flags); + + rate_idx = info->control.rates[0].idx; + /* if the rate isn't a well known legacy rate, take the lowest one */ + if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT_LEGACY) + rate_idx = rate_lowest_index( + &mvm->nvm_data->bands[info->band], sta); + + /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx += IWL_FIRST_OFDM_RATE; + + /* For 2.4 GHZ band, check that there is no need to remap */ + BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0); + + /* Get PLCP rate for tx_cmd->rate_n_flags */ + rate_plcp = iwl_mvm_mac80211_idx_to_hwrate(rate_idx); + + mvm->mgmt_last_antenna_idx = + iwl_mvm_next_antenna(mvm, mvm->nvm_data->valid_tx_ant, + mvm->mgmt_last_antenna_idx); + rate_flags = BIT(mvm->mgmt_last_antenna_idx) << RATE_MCS_ANT_POS; + + /* Set CCK flag as needed */ + if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE)) + rate_flags |= RATE_MCS_CCK_MSK; + + /* Set the rate in the TX cmd */ + tx_cmd->rate_n_flags = cpu_to_le32((u32)rate_plcp | rate_flags); +} + +/* + * Sets the fields in the Tx cmd that are crypto related + */ +static void iwl_mvm_set_tx_cmd_crypto(struct iwl_mvm *mvm, + struct ieee80211_tx_info *info, + struct iwl_tx_cmd *tx_cmd, + struct sk_buff *skb_frag) +{ + struct ieee80211_key_conf *keyconf = info->control.hw_key; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + tx_cmd->sec_ctl = TX_CMD_SEC_CCM; + memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); + if (info->flags & IEEE80211_TX_CTL_AMPDU) + tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_CCMP_AGG); + break; + + case WLAN_CIPHER_SUITE_TKIP: + tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; + ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); + break; + + case WLAN_CIPHER_SUITE_WEP104: + tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; + /* fall through */ + case WLAN_CIPHER_SUITE_WEP40: + tx_cmd->sec_ctl |= TX_CMD_SEC_WEP | + ((keyconf->keyidx << TX_CMD_SEC_WEP_KEY_IDX_POS) & + TX_CMD_SEC_WEP_KEY_IDX_MSK); + + memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); + break; + default: + IWL_ERR(mvm, "Unknown encode cipher %x\n", keyconf->cipher); + break; + } +} + +/* + * Allocates and sets the Tx cmd the driver data pointers in the skb + */ +static struct iwl_device_cmd * +iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb, + struct ieee80211_sta *sta, u8 sta_id) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_device_cmd *dev_cmd; + struct iwl_tx_cmd *tx_cmd; + + dev_cmd = iwl_trans_alloc_tx_cmd(mvm->trans); + + if (unlikely(!dev_cmd)) + return NULL; + + memset(dev_cmd, 0, sizeof(*dev_cmd)); + tx_cmd = (struct iwl_tx_cmd *)dev_cmd->payload; + + if (info->control.hw_key) + iwl_mvm_set_tx_cmd_crypto(mvm, info, tx_cmd, skb); + + iwl_mvm_set_tx_cmd(mvm, skb, tx_cmd, info, sta_id); + + iwl_mvm_set_tx_cmd_rate(mvm, tx_cmd, info, sta, hdr->frame_control); + + memset(&info->status, 0, sizeof(info->status)); + + info->driver_data[0] = NULL; + info->driver_data[1] = dev_cmd; + + return dev_cmd; +} + +int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_device_cmd *dev_cmd; + struct iwl_tx_cmd *tx_cmd; + u8 sta_id; + + if (WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_AMPDU)) + return -1; + + if (WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM && + (!info->control.vif || + info->hw_queue != info->control.vif->cab_queue))) + return -1; + + /* + * If the interface on which frame is sent is the P2P_DEVICE + * or an AP/GO interface use the broadcast station associated + * with it; otherwise use the AUX station. + */ + if (info->control.vif && + (info->control.vif->type == NL80211_IFTYPE_P2P_DEVICE || + info->control.vif->type == NL80211_IFTYPE_AP)) { + struct iwl_mvm_vif *mvmvif = + iwl_mvm_vif_from_mac80211(info->control.vif); + sta_id = mvmvif->bcast_sta.sta_id; + } else { + sta_id = mvm->aux_sta.sta_id; + } + + IWL_DEBUG_TX(mvm, "station Id %d, queue=%d\n", sta_id, info->hw_queue); + + dev_cmd = iwl_mvm_set_tx_params(mvm, skb, NULL, sta_id); + if (!dev_cmd) + return -1; + + /* From now on, we cannot access info->control */ + tx_cmd = (struct iwl_tx_cmd *)dev_cmd->payload; + + /* Copy MAC header from skb into command buffer */ + memcpy(tx_cmd->hdr, hdr, ieee80211_hdrlen(hdr->frame_control)); + + if (iwl_trans_tx(mvm->trans, skb, dev_cmd, info->hw_queue)) { + iwl_trans_free_tx_cmd(mvm->trans, dev_cmd); + return -1; + } + + return 0; +} + +/* + * Sets the fields in the Tx cmd that are crypto related + */ +int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb, + struct ieee80211_sta *sta) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_mvm_sta *mvmsta; + struct iwl_device_cmd *dev_cmd; + struct iwl_tx_cmd *tx_cmd; + __le16 fc; + u16 seq_number = 0; + u8 tid = IWL_MAX_TID_COUNT; + u8 txq_id = info->hw_queue; + bool is_data_qos = false, is_ampdu = false; + + mvmsta = (void *)sta->drv_priv; + fc = hdr->frame_control; + + if (WARN_ON_ONCE(!mvmsta)) + return -1; + + if (WARN_ON_ONCE(mvmsta->sta_id == IWL_INVALID_STATION)) + return -1; + + dev_cmd = iwl_mvm_set_tx_params(mvm, skb, sta, mvmsta->sta_id); + if (!dev_cmd) + goto drop; + + tx_cmd = (struct iwl_tx_cmd *)dev_cmd->payload; + /* From now on, we cannot access info->control */ + + spin_lock(&mvmsta->lock); + + if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc)) { + u8 *qc = NULL; + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; + if (WARN_ON_ONCE(tid >= IWL_MAX_TID_COUNT)) + goto drop_unlock_sta; + + seq_number = mvmsta->tid_data[tid].seq_number; + seq_number &= IEEE80211_SCTL_SEQ; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(seq_number); + seq_number += 0x10; + is_data_qos = true; + is_ampdu = info->flags & IEEE80211_TX_CTL_AMPDU; + } + + /* Copy MAC header from skb into command buffer */ + memcpy(tx_cmd->hdr, hdr, ieee80211_hdrlen(fc)); + + WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM); + + if (is_ampdu) { + if (WARN_ON_ONCE(mvmsta->tid_data[tid].state != IWL_AGG_ON)) + goto drop_unlock_sta; + txq_id = mvmsta->tid_data[tid].txq_id; + } + + IWL_DEBUG_TX(mvm, "TX to [%d|%d] Q:%d - seq: 0x%x\n", mvmsta->sta_id, + tid, txq_id, seq_number); + + /* NOTE: aggregation will need changes here (for txq id) */ + if (iwl_trans_tx(mvm->trans, skb, dev_cmd, txq_id)) + goto drop_unlock_sta; + + if (is_data_qos && !ieee80211_has_morefrags(fc)) + mvmsta->tid_data[tid].seq_number = seq_number; + + spin_unlock(&mvmsta->lock); + + if (mvmsta->vif->type == NL80211_IFTYPE_AP && + txq_id < IWL_FIRST_AMPDU_QUEUE) + atomic_inc(&mvmsta->pending_frames); + + return 0; + +drop_unlock_sta: + iwl_trans_free_tx_cmd(mvm->trans, dev_cmd); + spin_unlock(&mvmsta->lock); +drop: + return -1; +} + +static void iwl_mvm_check_ratid_empty(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, u8 tid) +{ + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; + struct ieee80211_vif *vif = mvmsta->vif; + + lockdep_assert_held(&mvmsta->lock); + + if (tid_data->ssn != tid_data->next_reclaimed) + return; + + switch (tid_data->state) { + case IWL_EMPTYING_HW_QUEUE_ADDBA: + IWL_DEBUG_TX_QUEUES(mvm, + "Can continue addBA flow ssn = next_recl = %d\n", + tid_data->next_reclaimed); + tid_data->state = IWL_AGG_STARTING; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + + case IWL_EMPTYING_HW_QUEUE_DELBA: + IWL_DEBUG_TX_QUEUES(mvm, + "Can continue DELBA flow ssn = next_recl = %d\n", + tid_data->next_reclaimed); + iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); + tid_data->state = IWL_AGG_OFF; + /* + * we can't hold the mutex - but since we are after a sequence + * point (call to iwl_trans_txq_disable), so we don't even need + * a memory barrier. + */ + mvm->queue_to_mac80211[tid_data->txq_id] = + IWL_INVALID_MAC80211_QUEUE; + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + + default: + break; + } +} + +#ifdef CONFIG_IWLWIFI_DEBUG +const char *iwl_mvm_get_tx_fail_reason(u32 status) +{ +#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x +#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x + + switch (status & TX_STATUS_MSK) { + case TX_STATUS_SUCCESS: + return "SUCCESS"; + TX_STATUS_POSTPONE(DELAY); + TX_STATUS_POSTPONE(FEW_BYTES); + TX_STATUS_POSTPONE(BT_PRIO); + TX_STATUS_POSTPONE(QUIET_PERIOD); + TX_STATUS_POSTPONE(CALC_TTAK); + TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); + TX_STATUS_FAIL(SHORT_LIMIT); + TX_STATUS_FAIL(LONG_LIMIT); + TX_STATUS_FAIL(UNDERRUN); + TX_STATUS_FAIL(DRAIN_FLOW); + TX_STATUS_FAIL(RFKILL_FLUSH); + TX_STATUS_FAIL(LIFE_EXPIRE); + TX_STATUS_FAIL(DEST_PS); + TX_STATUS_FAIL(HOST_ABORTED); + TX_STATUS_FAIL(BT_RETRY); + TX_STATUS_FAIL(STA_INVALID); + TX_STATUS_FAIL(FRAG_DROPPED); + TX_STATUS_FAIL(TID_DISABLE); + TX_STATUS_FAIL(FIFO_FLUSHED); + TX_STATUS_FAIL(SMALL_CF_POLL); + TX_STATUS_FAIL(FW_DROP); + TX_STATUS_FAIL(STA_COLOR_MISMATCH); + } + + return "UNKNOWN"; + +#undef TX_STATUS_FAIL +#undef TX_STATUS_POSTPONE +} +#endif /* CONFIG_IWLWIFI_DEBUG */ + +/** + * translate ucode response to mac80211 tx status control values + */ +static void iwl_mvm_hwrate_to_tx_control(u32 rate_n_flags, + struct ieee80211_tx_info *info) +{ + struct ieee80211_tx_rate *r = &info->status.rates[0]; + + info->status.antenna = + ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); + if (rate_n_flags & RATE_HT_MCS_GF_MSK) + r->flags |= IEEE80211_TX_RC_GREEN_FIELD; + switch (rate_n_flags & RATE_MCS_CHAN_WIDTH_MSK) { + case RATE_MCS_CHAN_WIDTH_20: + break; + case RATE_MCS_CHAN_WIDTH_40: + r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + break; + case RATE_MCS_CHAN_WIDTH_80: + r->flags |= IEEE80211_TX_RC_80_MHZ_WIDTH; + break; + case RATE_MCS_CHAN_WIDTH_160: + r->flags |= IEEE80211_TX_RC_160_MHZ_WIDTH; + break; + } + if (rate_n_flags & RATE_MCS_SGI_MSK) + r->flags |= IEEE80211_TX_RC_SHORT_GI; + if (rate_n_flags & RATE_MCS_HT_MSK) { + r->flags |= IEEE80211_TX_RC_MCS; + r->idx = rate_n_flags & RATE_HT_MCS_INDEX_MSK; + } else if (rate_n_flags & RATE_MCS_VHT_MSK) { + ieee80211_rate_set_vht( + r, rate_n_flags & RATE_VHT_MCS_RATE_CODE_MSK, + ((rate_n_flags & RATE_VHT_MCS_NSS_MSK) >> + RATE_VHT_MCS_NSS_POS) + 1); + r->flags |= IEEE80211_TX_RC_VHT_MCS; + } else { + r->idx = iwl_mvm_legacy_rate_to_mac80211_idx(rate_n_flags, + info->band); + } +} + +static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, + struct iwl_rx_packet *pkt) +{ + struct ieee80211_sta *sta; + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + struct iwl_mvm_tx_resp *tx_resp = (void *)pkt->data; + int sta_id = IWL_MVM_TX_RES_GET_RA(tx_resp->ra_tid); + int tid = IWL_MVM_TX_RES_GET_TID(tx_resp->ra_tid); + u32 status = le16_to_cpu(tx_resp->status.status); + u16 ssn = iwl_mvm_get_scd_ssn(tx_resp); + struct iwl_mvm_sta *mvmsta; + struct sk_buff_head skbs; + u8 skb_freed = 0; + u16 next_reclaimed, seq_ctl; + + __skb_queue_head_init(&skbs); + + seq_ctl = le16_to_cpu(tx_resp->seq_ctl); + + /* we can free until ssn % q.n_bd not inclusive */ + iwl_trans_reclaim(mvm->trans, txq_id, ssn, &skbs); + + while (!skb_queue_empty(&skbs)) { + struct sk_buff *skb = __skb_dequeue(&skbs); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + skb_freed++; + + iwl_trans_free_tx_cmd(mvm->trans, info->driver_data[1]); + + memset(&info->status, 0, sizeof(info->status)); + + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + + /* inform mac80211 about what happened with the frame */ + switch (status & TX_STATUS_MSK) { + case TX_STATUS_SUCCESS: + case TX_STATUS_DIRECT_DONE: + info->flags |= IEEE80211_TX_STAT_ACK; + break; + case TX_STATUS_FAIL_DEST_PS: + info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + break; + default: + break; + } + + info->status.rates[0].count = tx_resp->failure_frame + 1; + iwl_mvm_hwrate_to_tx_control(le32_to_cpu(tx_resp->initial_rate), + info); + + /* Single frame failure in an AMPDU queue => send BAR */ + if (txq_id >= IWL_FIRST_AMPDU_QUEUE && + !(info->flags & IEEE80211_TX_STAT_ACK)) { + /* there must be only one skb in the skb_list */ + WARN_ON_ONCE(skb_freed > 1 || + !skb_queue_empty(&skbs)); + info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + } + + /* W/A FW bug: seq_ctl is wrong when the queue is flushed */ + if (status == TX_STATUS_FAIL_FIFO_FLUSHED) { + struct ieee80211_hdr *hdr = (void *)skb->data; + seq_ctl = le16_to_cpu(hdr->seq_ctrl); + } + + ieee80211_tx_status(mvm->hw, skb); + } + + if (txq_id >= IWL_FIRST_AMPDU_QUEUE) { + /* If this is an aggregation queue, we use the ssn since: + * ssn = wifi seq_num % 256. + * The seq_ctl is the sequence control of the packet to which + * this Tx response relates. But if there is a hole in the + * bitmap of the BA we received, this Tx response may allow to + * reclaim the hole and all the subsequent packets that were + * already acked. In that case, seq_ctl != ssn, and the next + * packet to be reclaimed will be ssn and not seq_ctl. In that + * case, several packets will be reclaimed even if + * frame_count = 1. + * + * The ssn is the index (% 256) of the latest packet that has + * treated (acked / dropped) + 1. + */ + next_reclaimed = ssn; + } else { + /* The next packet to be reclaimed is the one after this one */ + next_reclaimed = SEQ_TO_SN(seq_ctl + 0x10); + } + + IWL_DEBUG_TX_REPLY(mvm, + "TXQ %d status %s (0x%08x)\n\t\t\t\tinitial_rate 0x%x " + "retries %d, idx=%d ssn=%d next_reclaimed=0x%x seq_ctl=0x%x\n", + txq_id, iwl_mvm_get_tx_fail_reason(status), + status, le32_to_cpu(tx_resp->initial_rate), + tx_resp->failure_frame, SEQ_TO_INDEX(sequence), + ssn, next_reclaimed, seq_ctl); + + rcu_read_lock(); + + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + + if (!IS_ERR_OR_NULL(sta)) { + mvmsta = (void *)sta->drv_priv; + + if (tid != IWL_TID_NON_QOS) { + struct iwl_mvm_tid_data *tid_data = + &mvmsta->tid_data[tid]; + + spin_lock(&mvmsta->lock); + tid_data->next_reclaimed = next_reclaimed; + IWL_DEBUG_TX_REPLY(mvm, "Next reclaimed packet:%d\n", + next_reclaimed); + iwl_mvm_check_ratid_empty(mvm, sta, tid); + spin_unlock(&mvmsta->lock); + } + +#ifdef CONFIG_PM_SLEEP + mvmsta->last_seq_ctl = seq_ctl; +#endif + } else { + sta = NULL; + mvmsta = NULL; + } + + /* + * If the txq is not an AMPDU queue, there is no chance we freed + * several skbs. Check that out... + * If there are no pending frames for this STA, notify mac80211 that + * this station can go to sleep in its STA table. + */ + if (txq_id < IWL_FIRST_AMPDU_QUEUE && mvmsta && + !WARN_ON(skb_freed > 1) && + mvmsta->vif->type == NL80211_IFTYPE_AP && + atomic_sub_and_test(skb_freed, &mvmsta->pending_frames)) { + ieee80211_sta_block_awake(mvm->hw, sta, false); + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); + } + + rcu_read_unlock(); +} + +#ifdef CONFIG_IWLWIFI_DEBUG +#define AGG_TX_STATE_(x) case AGG_TX_STATE_ ## x: return #x +static const char *iwl_get_agg_tx_status(u16 status) +{ + switch (status & AGG_TX_STATE_STATUS_MSK) { + AGG_TX_STATE_(TRANSMITTED); + AGG_TX_STATE_(UNDERRUN); + AGG_TX_STATE_(BT_PRIO); + AGG_TX_STATE_(FEW_BYTES); + AGG_TX_STATE_(ABORT); + AGG_TX_STATE_(LAST_SENT_TTL); + AGG_TX_STATE_(LAST_SENT_TRY_CNT); + AGG_TX_STATE_(LAST_SENT_BT_KILL); + AGG_TX_STATE_(SCD_QUERY); + AGG_TX_STATE_(TEST_BAD_CRC32); + AGG_TX_STATE_(RESPONSE); + AGG_TX_STATE_(DUMP_TX); + AGG_TX_STATE_(DELAY_TX); + } + + return "UNKNOWN"; +} + +static void iwl_mvm_rx_tx_cmd_agg_dbg(struct iwl_mvm *mvm, + struct iwl_rx_packet *pkt) +{ + struct iwl_mvm_tx_resp *tx_resp = (void *)pkt->data; + struct agg_tx_status *frame_status = &tx_resp->status; + int i; + + for (i = 0; i < tx_resp->frame_count; i++) { + u16 fstatus = le16_to_cpu(frame_status[i].status); + + IWL_DEBUG_TX_REPLY(mvm, + "status %s (0x%04x), try-count (%d) seq (0x%x)\n", + iwl_get_agg_tx_status(fstatus), + fstatus & AGG_TX_STATE_STATUS_MSK, + (fstatus & AGG_TX_STATE_TRY_CNT_MSK) >> + AGG_TX_STATE_TRY_CNT_POS, + le16_to_cpu(frame_status[i].sequence)); + } +} +#else +static void iwl_mvm_rx_tx_cmd_agg_dbg(struct iwl_mvm *mvm, + struct iwl_rx_packet *pkt) +{} +#endif /* CONFIG_IWLWIFI_DEBUG */ + +static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, + struct iwl_rx_packet *pkt) +{ + struct iwl_mvm_tx_resp *tx_resp = (void *)pkt->data; + int sta_id = IWL_MVM_TX_RES_GET_RA(tx_resp->ra_tid); + int tid = IWL_MVM_TX_RES_GET_TID(tx_resp->ra_tid); + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + struct ieee80211_sta *sta; + + if (WARN_ON_ONCE(SEQ_TO_QUEUE(sequence) < IWL_FIRST_AMPDU_QUEUE)) + return; + + if (WARN_ON_ONCE(tid == IWL_TID_NON_QOS)) + return; + + iwl_mvm_rx_tx_cmd_agg_dbg(mvm, pkt); + + rcu_read_lock(); + + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + + if (!WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) { + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; + mvmsta->tid_data[tid].rate_n_flags = + le32_to_cpu(tx_resp->initial_rate); + } + + rcu_read_unlock(); +} + +int iwl_mvm_rx_tx_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_mvm_tx_resp *tx_resp = (void *)pkt->data; + + if (tx_resp->frame_count == 1) + iwl_mvm_rx_tx_cmd_single(mvm, pkt); + else + iwl_mvm_rx_tx_cmd_agg(mvm, pkt); + + return 0; +} + +int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_mvm_ba_notif *ba_notif = (void *)pkt->data; + struct sk_buff_head reclaimed_skbs; + struct iwl_mvm_tid_data *tid_data; + struct ieee80211_tx_info *info; + struct ieee80211_sta *sta; + struct iwl_mvm_sta *mvmsta; + struct ieee80211_hdr *hdr; + struct sk_buff *skb; + int sta_id, tid, freed; + + /* "flow" corresponds to Tx queue */ + u16 scd_flow = le16_to_cpu(ba_notif->scd_flow); + + /* "ssn" is start of block-ack Tx window, corresponds to index + * (in Tx queue's circular buffer) of first TFD/frame in window */ + u16 ba_resp_scd_ssn = le16_to_cpu(ba_notif->scd_ssn); + + sta_id = ba_notif->sta_id; + tid = ba_notif->tid; + + rcu_read_lock(); + + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + + /* Reclaiming frames for a station that has been deleted ? */ + if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) { + rcu_read_unlock(); + return 0; + } + + mvmsta = (void *)sta->drv_priv; + tid_data = &mvmsta->tid_data[tid]; + + if (WARN_ONCE(tid_data->txq_id != scd_flow, "Q %d, tid %d, flow %d", + tid_data->txq_id, tid, scd_flow)) { + rcu_read_unlock(); + return 0; + } + + spin_lock(&mvmsta->lock); + + __skb_queue_head_init(&reclaimed_skbs); + + /* + * Release all TFDs before the SSN, i.e. all TFDs in front of + * block-ack window (we assume that they've been successfully + * transmitted ... if not, it's too late anyway). + */ + iwl_trans_reclaim(mvm->trans, scd_flow, ba_resp_scd_ssn, + &reclaimed_skbs); + + IWL_DEBUG_TX_REPLY(mvm, + "BA_NOTIFICATION Received from %pM, sta_id = %d\n", + (u8 *)&ba_notif->sta_addr_lo32, + ba_notif->sta_id); + IWL_DEBUG_TX_REPLY(mvm, + "TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = %d, scd_ssn = %d sent:%d, acked:%d\n", + ba_notif->tid, le16_to_cpu(ba_notif->seq_ctl), + (unsigned long long)le64_to_cpu(ba_notif->bitmap), + scd_flow, ba_resp_scd_ssn, ba_notif->txed, + ba_notif->txed_2_done); + + tid_data->next_reclaimed = ba_resp_scd_ssn; + + iwl_mvm_check_ratid_empty(mvm, sta, tid); + + freed = 0; + + skb_queue_walk(&reclaimed_skbs, skb) { + hdr = (struct ieee80211_hdr *)skb->data; + + if (ieee80211_is_data_qos(hdr->frame_control)) + freed++; + else + WARN_ON_ONCE(1); + + info = IEEE80211_SKB_CB(skb); + iwl_trans_free_tx_cmd(mvm->trans, info->driver_data[1]); + + if (freed == 1) { + /* this is the first skb we deliver in this batch */ + /* put the rate scaling data there */ + info = IEEE80211_SKB_CB(skb); + memset(&info->status, 0, sizeof(info->status)); + info->flags |= IEEE80211_TX_STAT_ACK; + info->flags |= IEEE80211_TX_STAT_AMPDU; + info->status.ampdu_ack_len = ba_notif->txed_2_done; + info->status.ampdu_len = ba_notif->txed; + iwl_mvm_hwrate_to_tx_control(tid_data->rate_n_flags, + info); + } + } + + spin_unlock(&mvmsta->lock); + + rcu_read_unlock(); + + while (!skb_queue_empty(&reclaimed_skbs)) { + skb = __skb_dequeue(&reclaimed_skbs); + ieee80211_tx_status(mvm->hw, skb); + } + + return 0; +} + +int iwl_mvm_flush_tx_path(struct iwl_mvm *mvm, u32 tfd_msk, bool sync) +{ + int ret; + struct iwl_tx_path_flush_cmd flush_cmd = { + .queues_ctl = cpu_to_le32(tfd_msk), + .flush_ctl = cpu_to_le16(DUMP_TX_FIFO_FLUSH), + }; + + u32 flags = sync ? CMD_SYNC : CMD_ASYNC; + + ret = iwl_mvm_send_cmd_pdu(mvm, TXPATH_FLUSH, flags, + sizeof(flush_cmd), &flush_cmd); + if (ret) + IWL_ERR(mvm, "Failed to send flush command (%d)\n", ret); + return ret; +} diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c new file mode 100644 index 0000000..000e842 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -0,0 +1,472 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#include + +#include "iwl-debug.h" +#include "iwl-io.h" + +#include "mvm.h" +#include "fw-api-rs.h" + +/* + * Will return 0 even if the cmd failed when RFKILL is asserted unless + * CMD_WANT_SKB is set in cmd->flags. + */ +int iwl_mvm_send_cmd(struct iwl_mvm *mvm, struct iwl_host_cmd *cmd) +{ + int ret; + + /* + * Synchronous commands from this op-mode must hold + * the mutex, this ensures we don't try to send two + * (or more) synchronous commands at a time. + */ + if (!(cmd->flags & CMD_ASYNC)) + lockdep_assert_held(&mvm->mutex); + + ret = iwl_trans_send_cmd(mvm->trans, cmd); + + /* + * If the caller wants the SKB, then don't hide any problems, the + * caller might access the response buffer which will be NULL if + * the command failed. + */ + if (cmd->flags & CMD_WANT_SKB) + return ret; + + /* Silently ignore failures if RFKILL is asserted */ + if (!ret || ret == -ERFKILL) + return 0; + return ret; +} + +int iwl_mvm_send_cmd_pdu(struct iwl_mvm *mvm, u8 id, + u32 flags, u16 len, const void *data) +{ + struct iwl_host_cmd cmd = { + .id = id, + .len = { len, }, + .data = { data, }, + .flags = flags, + }; + + return iwl_mvm_send_cmd(mvm, &cmd); +} + +/* + * We assume that the caller set the status to the sucess value + */ +int iwl_mvm_send_cmd_status(struct iwl_mvm *mvm, struct iwl_host_cmd *cmd, + u32 *status) +{ + struct iwl_rx_packet *pkt; + struct iwl_cmd_response *resp; + int ret, resp_len; + + lockdep_assert_held(&mvm->mutex); + + /* + * Only synchronous commands can wait for status, + * we use WANT_SKB so the caller can't. + */ + if (WARN_ONCE(cmd->flags & (CMD_ASYNC | CMD_WANT_SKB), + "cmd flags %x", cmd->flags)) + return -EINVAL; + + cmd->flags |= CMD_SYNC | CMD_WANT_SKB; + + ret = iwl_trans_send_cmd(mvm->trans, cmd); + if (ret == -ERFKILL) { + /* + * The command failed because of RFKILL, don't update + * the status, leave it as success and return 0. + */ + return 0; + } else if (ret) { + return ret; + } + + pkt = cmd->resp_pkt; + /* Can happen if RFKILL is asserted */ + if (!pkt) { + ret = 0; + goto out_free_resp; + } + + if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { + ret = -EIO; + goto out_free_resp; + } + + resp_len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + if (WARN_ON_ONCE(resp_len != sizeof(pkt->hdr) + sizeof(*resp))) { + ret = -EIO; + goto out_free_resp; + } + + resp = (void *)pkt->data; + *status = le32_to_cpu(resp->status); + out_free_resp: + iwl_free_resp(cmd); + return ret; +} + +/* + * We assume that the caller set the status to the sucess value + */ +int iwl_mvm_send_cmd_pdu_status(struct iwl_mvm *mvm, u8 id, u16 len, + const void *data, u32 *status) +{ + struct iwl_host_cmd cmd = { + .id = id, + .len = { len, }, + .data = { data, }, + }; + + return iwl_mvm_send_cmd_status(mvm, &cmd, status); +} + +#define IWL_DECLARE_RATE_INFO(r) \ + [IWL_RATE_##r##M_INDEX] = IWL_RATE_##r##M_PLCP + +/* + * Translate from fw_rate_index (IWL_RATE_XXM_INDEX) to PLCP + */ +static const u8 fw_rate_idx_to_plcp[IWL_RATE_COUNT] = { + IWL_DECLARE_RATE_INFO(1), + IWL_DECLARE_RATE_INFO(2), + IWL_DECLARE_RATE_INFO(5), + IWL_DECLARE_RATE_INFO(11), + IWL_DECLARE_RATE_INFO(6), + IWL_DECLARE_RATE_INFO(9), + IWL_DECLARE_RATE_INFO(12), + IWL_DECLARE_RATE_INFO(18), + IWL_DECLARE_RATE_INFO(24), + IWL_DECLARE_RATE_INFO(36), + IWL_DECLARE_RATE_INFO(48), + IWL_DECLARE_RATE_INFO(54), +}; + +int iwl_mvm_legacy_rate_to_mac80211_idx(u32 rate_n_flags, + enum ieee80211_band band) +{ + int rate = rate_n_flags & RATE_LEGACY_RATE_MSK; + int idx; + int band_offset = 0; + + /* Legacy rate format, search for match in table */ + if (band == IEEE80211_BAND_5GHZ) + band_offset = IWL_FIRST_OFDM_RATE; + for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) + if (fw_rate_idx_to_plcp[idx] == rate) + return idx - band_offset; + + return -1; +} + +u8 iwl_mvm_mac80211_idx_to_hwrate(int rate_idx) +{ + /* Get PLCP rate for tx_cmd->rate_n_flags */ + return fw_rate_idx_to_plcp[rate_idx]; +} + +int iwl_mvm_rx_fw_error(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_error_resp *err_resp = (void *)pkt->data; + + IWL_ERR(mvm, "FW Error notification: type 0x%08X cmd_id 0x%02X\n", + le32_to_cpu(err_resp->error_type), err_resp->cmd_id); + IWL_ERR(mvm, "FW Error notification: seq 0x%04X service 0x%08X\n", + le16_to_cpu(err_resp->bad_cmd_seq_num), + le32_to_cpu(err_resp->error_service)); + IWL_ERR(mvm, "FW Error notification: timestamp 0x%16llX\n", + le64_to_cpu(err_resp->timestamp)); + return 0; +} + +/* + * Returns the first antenna as ANT_[ABC], as defined in iwl-config.h. + * The parameter should also be a combination of ANT_[ABC]. + */ +u8 first_antenna(u8 mask) +{ + BUILD_BUG_ON(ANT_A != BIT(0)); /* using ffs is wrong if not */ + WARN_ON_ONCE(!mask); /* ffs will return 0 if mask is zeroed */ + return (u8)(BIT(ffs(mask))); +} + +/* + * Toggles between TX antennas to send the probe request on. + * Receives the bitmask of valid TX antennas and the *index* used + * for the last TX, and returns the next valid *index* to use. + * In order to set it in the tx_cmd, must do BIT(idx). + */ +u8 iwl_mvm_next_antenna(struct iwl_mvm *mvm, u8 valid, u8 last_idx) +{ + u8 ind = last_idx; + int i; + + for (i = 0; i < RATE_MCS_ANT_NUM; i++) { + ind = (ind + 1) % RATE_MCS_ANT_NUM; + if (valid & BIT(ind)) + return ind; + } + + WARN_ONCE(1, "Failed to toggle between antennas 0x%x", valid); + return last_idx; +} + +static struct { + char *name; + u8 num; +} advanced_lookup[] = { + { "NMI_INTERRUPT_WDG", 0x34 }, + { "SYSASSERT", 0x35 }, + { "UCODE_VERSION_MISMATCH", 0x37 }, + { "BAD_COMMAND", 0x38 }, + { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, + { "FATAL_ERROR", 0x3D }, + { "NMI_TRM_HW_ERR", 0x46 }, + { "NMI_INTERRUPT_TRM", 0x4C }, + { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, + { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, + { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, + { "NMI_INTERRUPT_HOST", 0x66 }, + { "NMI_INTERRUPT_ACTION_PT", 0x7C }, + { "NMI_INTERRUPT_UNKNOWN", 0x84 }, + { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, + { "ADVANCED_SYSASSERT", 0 }, +}; + +static const char *desc_lookup(u32 num) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(advanced_lookup) - 1; i++) + if (advanced_lookup[i].num == num) + return advanced_lookup[i].name; + + /* No entry matches 'num', so it is the last: ADVANCED_SYSASSERT */ + return advanced_lookup[i].name; +} + +/* + * Note: This structure is read from the device with IO accesses, + * and the reading already does the endian conversion. As it is + * read with u32-sized accesses, any members with a different size + * need to be ordered correctly though! + */ +struct iwl_error_event_table { + u32 valid; /* (nonzero) valid, (0) log is empty */ + u32 error_id; /* type of error */ + u32 pc; /* program counter */ + u32 blink1; /* branch link */ + u32 blink2; /* branch link */ + u32 ilink1; /* interrupt link */ + u32 ilink2; /* interrupt link */ + u32 data1; /* error-specific data */ + u32 data2; /* error-specific data */ + u32 data3; /* error-specific data */ + u32 bcon_time; /* beacon timer */ + u32 tsf_low; /* network timestamp function timer */ + u32 tsf_hi; /* network timestamp function timer */ + u32 gp1; /* GP1 timer register */ + u32 gp2; /* GP2 timer register */ + u32 gp3; /* GP3 timer register */ + u32 ucode_ver; /* uCode version */ + u32 hw_ver; /* HW Silicon version */ + u32 brd_ver; /* HW board version */ + u32 log_pc; /* log program counter */ + u32 frame_ptr; /* frame pointer */ + u32 stack_ptr; /* stack pointer */ + u32 hcmd; /* last host command header */ + u32 isr0; /* isr status register LMPM_NIC_ISR0: + * rxtx_flag */ + u32 isr1; /* isr status register LMPM_NIC_ISR1: + * host_flag */ + u32 isr2; /* isr status register LMPM_NIC_ISR2: + * enc_flag */ + u32 isr3; /* isr status register LMPM_NIC_ISR3: + * time_flag */ + u32 isr4; /* isr status register LMPM_NIC_ISR4: + * wico interrupt */ + u32 isr_pref; /* isr status register LMPM_NIC_PREF_STAT */ + u32 wait_event; /* wait event() caller address */ + u32 l2p_control; /* L2pControlField */ + u32 l2p_duration; /* L2pDurationField */ + u32 l2p_mhvalid; /* L2pMhValidBits */ + u32 l2p_addr_match; /* L2pAddrMatchStat */ + u32 lmpm_pmg_sel; /* indicate which clocks are turned on + * (LMPM_PMG_SEL) */ + u32 u_timestamp; /* indicate when the date and time of the + * compilation */ + u32 flow_handler; /* FH read/write pointers, RX credit */ +} __packed; + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm) +{ + struct iwl_trans *trans = mvm->trans; + struct iwl_error_event_table table; + u32 base; + + base = mvm->error_event_table; + if (mvm->cur_ucode == IWL_UCODE_INIT) { + if (!base) + base = mvm->fw->init_errlog_ptr; + } else { + if (!base) + base = mvm->fw->inst_errlog_ptr; + } + + if (base < 0x800000 || base >= 0x80C000) { + IWL_ERR(mvm, + "Not valid error log pointer 0x%08X for %s uCode\n", + base, + (mvm->cur_ucode == IWL_UCODE_INIT) + ? "Init" : "RT"); + return; + } + + iwl_trans_read_mem_bytes(trans, base, &table, sizeof(table)); + + if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) { + IWL_ERR(trans, "Start IWL Error Log Dump:\n"); + IWL_ERR(trans, "Status: 0x%08lX, count: %d\n", + mvm->status, table.valid); + } + + trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low, + table.data1, table.data2, table.data3, + table.blink1, table.blink2, table.ilink1, + table.ilink2, table.bcon_time, table.gp1, + table.gp2, table.gp3, table.ucode_ver, + table.hw_ver, table.brd_ver); + IWL_ERR(mvm, "0x%08X | %-28s\n", table.error_id, + desc_lookup(table.error_id)); + IWL_ERR(mvm, "0x%08X | uPc\n", table.pc); + IWL_ERR(mvm, "0x%08X | branchlink1\n", table.blink1); + IWL_ERR(mvm, "0x%08X | branchlink2\n", table.blink2); + IWL_ERR(mvm, "0x%08X | interruptlink1\n", table.ilink1); + IWL_ERR(mvm, "0x%08X | interruptlink2\n", table.ilink2); + IWL_ERR(mvm, "0x%08X | data1\n", table.data1); + IWL_ERR(mvm, "0x%08X | data2\n", table.data2); + IWL_ERR(mvm, "0x%08X | data3\n", table.data3); + IWL_ERR(mvm, "0x%08X | beacon time\n", table.bcon_time); + IWL_ERR(mvm, "0x%08X | tsf low\n", table.tsf_low); + IWL_ERR(mvm, "0x%08X | tsf hi\n", table.tsf_hi); + IWL_ERR(mvm, "0x%08X | time gp1\n", table.gp1); + IWL_ERR(mvm, "0x%08X | time gp2\n", table.gp2); + IWL_ERR(mvm, "0x%08X | time gp3\n", table.gp3); + IWL_ERR(mvm, "0x%08X | uCode version\n", table.ucode_ver); + IWL_ERR(mvm, "0x%08X | hw version\n", table.hw_ver); + IWL_ERR(mvm, "0x%08X | board version\n", table.brd_ver); + IWL_ERR(mvm, "0x%08X | hcmd\n", table.hcmd); + IWL_ERR(mvm, "0x%08X | isr0\n", table.isr0); + IWL_ERR(mvm, "0x%08X | isr1\n", table.isr1); + IWL_ERR(mvm, "0x%08X | isr2\n", table.isr2); + IWL_ERR(mvm, "0x%08X | isr3\n", table.isr3); + IWL_ERR(mvm, "0x%08X | isr4\n", table.isr4); + IWL_ERR(mvm, "0x%08X | isr_pref\n", table.isr_pref); + IWL_ERR(mvm, "0x%08X | wait_event\n", table.wait_event); + IWL_ERR(mvm, "0x%08X | l2p_control\n", table.l2p_control); + IWL_ERR(mvm, "0x%08X | l2p_duration\n", table.l2p_duration); + IWL_ERR(mvm, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid); + IWL_ERR(mvm, "0x%08X | l2p_addr_match\n", table.l2p_addr_match); + IWL_ERR(mvm, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel); + IWL_ERR(mvm, "0x%08X | timestamp\n", table.u_timestamp); + IWL_ERR(mvm, "0x%08X | flow_handler\n", table.flow_handler); +} + +/** + * iwl_mvm_send_lq_cmd() - Send link quality command + * @init: This command is sent as part of station initialization right + * after station has been added. + * + * The link quality command is sent as the last step of station creation. + * This is the special case in which init is set and we call a callback in + * this case to clear the state indicating that station creation is in + * progress. + */ +int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, + u8 flags, bool init) +{ + struct iwl_host_cmd cmd = { + .id = LQ_CMD, + .len = { sizeof(struct iwl_lq_cmd), }, + .flags = flags, + .data = { lq, }, + }; + + if (WARN_ON(lq->sta_id == IWL_INVALID_STATION)) + return -EINVAL; + + if (WARN_ON(init && (cmd.flags & CMD_ASYNC))) + return -EINVAL; + + return iwl_mvm_send_cmd(mvm, &cmd); +} -- cgit v0.10.2 From 6690c01d168ecc620139dbd9df8affc2ac8e0683 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 28 Jan 2013 09:58:31 +0100 Subject: iwlwifi: lower BT coex aggregation message severity As the rate scaling algorithm will attempt to enable aggregation over and over again, the message will flood the log if there is, for example, Bluetooth streaming music. Make it a debug messages instead of printing it all the time. Reported-by: Jan-Michael Brummer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index 2eb4277..a131227 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -411,8 +411,9 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, * BT traffic, as they would just be disrupted by BT. */ if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) { - IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n", - priv->bt_traffic_load); + IWL_DEBUG_COEX(priv, + "BT traffic (%d), no aggregation allowed\n", + priv->bt_traffic_load); return ret; } -- cgit v0.10.2 From e139dc4aebf52a9c88552963b9794fd1dff036f1 Mon Sep 17 00:00:00 2001 From: Lilach Edelstein Date: Sun, 13 Jan 2013 13:31:10 +0200 Subject: iwlwifi: add iwl_set_bits_mask to transport API Express iwl_set_bit() and iwl_clear_bit() through iwl_set_bits_mask() and add the latter to the transport's API in order to allow different implementation for different transport types in the future. Signed-off-by: Lilach Edelstein Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 04b467f..f5f9164 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -1991,13 +1991,13 @@ static void iwl_nic_config(struct iwl_op_mode *op_mode) struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); /* SKU Control */ - iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | - CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP, - (CSR_HW_REV_STEP(priv->trans->hw_rev) << - CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) | - (CSR_HW_REV_DASH(priv->trans->hw_rev) << - CSR_HW_IF_CONFIG_REG_POS_MAC_DASH)); + iwl_trans_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | + CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP, + (CSR_HW_REV_STEP(priv->trans->hw_rev) << + CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) | + (CSR_HW_REV_DASH(priv->trans->hw_rev) << + CSR_HW_IF_CONFIG_REG_POS_MAC_DASH)); /* write radio config values to register */ if (priv->nvm_data->radio_cfg_type <= EEPROM_RF_CONFIG_TYPE_MAX) { @@ -2009,10 +2009,11 @@ static void iwl_nic_config(struct iwl_op_mode *op_mode) priv->nvm_data->radio_cfg_dash << CSR_HW_IF_CONFIG_REG_POS_PHY_DASH; - iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | - CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | - CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val); + iwl_trans_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | + CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | + CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, + reg_val); IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n", priv->nvm_data->radio_cfg_type, diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index dbc0122..7ef4738 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -35,54 +35,6 @@ #define IWL_POLL_INTERVAL 10 /* microseconds */ -void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - iwl_write32(trans, reg, iwl_read32(trans, reg) | mask); -} - -void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - iwl_write32(trans, reg, iwl_read32(trans, reg) & ~mask); -} - -void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - __iwl_set_bit(trans, reg, mask); - spin_unlock_irqrestore(&trans->reg_lock, flags); -} -EXPORT_SYMBOL_GPL(iwl_set_bit); - -void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - __iwl_clear_bit(trans, reg, mask); - spin_unlock_irqrestore(&trans->reg_lock, flags); -} -EXPORT_SYMBOL_GPL(iwl_clear_bit); - -void iwl_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) -{ - unsigned long flags; - u32 v; - -#ifdef CONFIG_IWLWIFI_DEBUG - WARN_ON_ONCE(value & ~mask); -#endif - - spin_lock_irqsave(&trans->reg_lock, flags); - v = iwl_read32(trans, reg); - v &= ~mask; - v |= value; - iwl_write32(trans, reg, v); - spin_unlock_irqrestore(&trans->reg_lock, flags); -} -EXPORT_SYMBOL_GPL(iwl_set_bits_mask); - int iwl_poll_bit(struct iwl_trans *trans, u32 addr, u32 bits, u32 mask, int timeout) { diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 5d0ce43..fd9f5b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -51,12 +51,15 @@ static inline u32 iwl_read32(struct iwl_trans *trans, u32 ofs) return val; } -void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); -void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); -void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); -void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); +static inline void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) +{ + iwl_trans_set_bits_mask(trans, reg, mask, mask); +} -void iwl_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value); +static inline void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) +{ + iwl_trans_set_bits_mask(trans, reg, mask, 0); +} int iwl_poll_bit(struct iwl_trans *trans, u32 addr, u32 bits, u32 mask, int timeout); diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index d4ab24b..c2b7e85 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -418,6 +418,7 @@ struct iwl_trans; * @set_pmi: set the power pmi state * @grab_nic_access: wake the NIC to be able to access non-HBUS regs * @release_nic_access: let the NIC go to sleep + * @set_bits_mask - set SRAM register according to value and mask. */ struct iwl_trans_ops { @@ -462,6 +463,8 @@ struct iwl_trans_ops { void (*set_pmi)(struct iwl_trans *trans, bool state); bool (*grab_nic_access)(struct iwl_trans *trans, bool silent); void (*release_nic_access)(struct iwl_trans *trans); + void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask, + u32 value); }; /** @@ -762,6 +765,12 @@ static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) trans->ops->set_pmi(trans, state); } +static inline void +iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) +{ + trans->ops->set_bits_mask(trans, reg, mask, value); +} + #define iwl_trans_grab_nic_access(trans, silent) \ __cond_lock(nic_access, \ likely((trans)->ops->grab_nic_access(trans, silent))) diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index e675e4a..983dca3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -177,15 +177,15 @@ static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode) reg_val |= CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI; reg_val |= CSR_HW_IF_CONFIG_REG_BIT_MAC_SI; - iwl_set_bits_mask(mvm->trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | - CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP | - CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | - CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | - CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH | - CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR_HW_IF_CONFIG_REG_BIT_MAC_SI, - reg_val); + iwl_trans_set_bits_mask(mvm->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | + CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP | + CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | + CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | + CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH | + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI, + reg_val); IWL_DEBUG_INFO(mvm, "Radio type=0x%x-0x%x-0x%x\n", radio_cfg_type, radio_cfg_step, radio_cfg_dash); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 35685c5..8692494 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -75,6 +75,33 @@ #include "iwl-agn-hw.h" #include "internal.h" +static void __iwl_trans_pcie_set_bits_mask(struct iwl_trans *trans, + u32 reg, u32 mask, u32 value) +{ + u32 v; + +#ifdef CONFIG_IWLWIFI_DEBUG + WARN_ON_ONCE(value & ~mask); +#endif + + v = iwl_read32(trans, reg); + v &= ~mask; + v |= value; + iwl_write32(trans, reg, v); +} + +static inline void __iwl_trans_pcie_clear_bit(struct iwl_trans *trans, + u32 reg, u32 mask) +{ + __iwl_trans_pcie_set_bits_mask(trans, reg, mask, 0); +} + +static inline void __iwl_trans_pcie_set_bit(struct iwl_trans *trans, + u32 reg, u32 mask) +{ + __iwl_trans_pcie_set_bits_mask(trans, reg, mask, mask); +} + static void iwl_pcie_set_pwr(struct iwl_trans *trans, bool vaux) { if (vaux && pci_pme_capable(to_pci_dev(trans->dev), PCI_D3cold)) @@ -786,8 +813,8 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent) lockdep_assert_held(&trans->reg_lock); /* this bit wakes up the NIC */ - __iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + __iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); /* * These bits say the device is running, and should keep running for @@ -829,8 +856,8 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent) static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) { lockdep_assert_held(&trans->reg_lock); - __iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + __iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); /* * Above we read the CSR_GP_CNTRL register, which will flush * any previous writes, but we need the write that clears the @@ -952,6 +979,16 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) return ret; } +static void iwl_trans_pcie_set_bits_mask(struct iwl_trans *trans, u32 reg, + u32 mask, u32 value) +{ + unsigned long flags; + + spin_lock_irqsave(&trans->reg_lock, flags); + __iwl_trans_pcie_set_bits_mask(trans, reg, mask, value); + spin_unlock_irqrestore(&trans->reg_lock, flags); +} + static const char *get_fh_string(int cmd) { #define IWL_CMD(x) case x: return #x @@ -1405,7 +1442,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .configure = iwl_trans_pcie_configure, .set_pmi = iwl_trans_pcie_set_pmi, .grab_nic_access = iwl_trans_pcie_grab_nic_access, - .release_nic_access = iwl_trans_pcie_release_nic_access + .release_nic_access = iwl_trans_pcie_release_nic_access, + .set_bits_mask = iwl_trans_pcie_set_bits_mask, }; struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, -- cgit v0.10.2 From e56b04efc1f795da42cf1d9651b52a4a5bebd730 Mon Sep 17 00:00:00 2001 From: Lilach Edelstein Date: Wed, 16 Jan 2013 11:34:49 +0200 Subject: iwlwifi: move register access lock into transport Move the reg_lock that protects HW register access into the transport implementation. Locking is no longer exposed, but handled internally in grab and release NIC access. This simplifies the users. Signed-off-by: Lilach Edelstein Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index b551812..c2f03ec 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -459,14 +459,12 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) base = priv->device_pointers.error_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { - spin_lock_irqsave(&priv->trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(priv->trans, true)) { + if (iwl_trans_grab_nic_access(priv->trans, true, &flags)) { iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(priv->trans); + iwl_trans_release_nic_access(priv->trans, &flags); ret = 0; } - spin_unlock_irqrestore(&priv->trans->reg_lock, flags); #ifdef CONFIG_IWLWIFI_DEBUGFS if (ret == 0) { diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index f5f9164..b9e3517 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -353,11 +353,8 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&priv->trans->reg_lock, reg_flags); - if (!iwl_trans_grab_nic_access(priv->trans, false)) { - spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); + if (!iwl_trans_grab_nic_access(priv->trans, false, ®_flags)) return; - } /* Set starting address; reads will auto-increment */ iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, ptr); @@ -388,8 +385,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, } } /* Allow device to power down */ - iwl_trans_release_nic_access(priv->trans); - spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); + iwl_trans_release_nic_access(priv->trans, ®_flags); } static void iwl_continuous_event_trace(struct iwl_priv *priv) @@ -1717,9 +1713,8 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, ptr = base + EVENT_START_OFFSET + (start_idx * event_size); /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&trans->reg_lock, reg_flags); - if (!iwl_trans_grab_nic_access(trans, false)) - goto out_unlock; + if (!iwl_trans_grab_nic_access(trans, false, ®_flags)) + return pos; /* Set starting address; reads will auto-increment */ iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr); @@ -1757,9 +1752,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, } /* Allow device to power down */ - iwl_trans_release_nic_access(trans); -out_unlock: - spin_unlock_irqrestore(&trans->reg_lock, reg_flags); + iwl_trans_release_nic_access(trans, ®_flags); return pos; } diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index 617fca3..67e2e13 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -185,10 +185,8 @@ static void iwl_tt_check_exit_ct_kill(unsigned long data) priv->thermal_throttle.ct_kill_toggle = true; } iwl_read32(priv->trans, CSR_UCODE_DRV_GP1); - spin_lock_irqsave(&priv->trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(priv->trans, false)) - iwl_trans_release_nic_access(priv->trans); - spin_unlock_irqrestore(&priv->trans->reg_lock, flags); + if (iwl_trans_grab_nic_access(priv->trans, false, &flags)) + iwl_trans_release_nic_access(priv->trans, &flags); /* Reschedule the ct_kill timer to occur in * CT_KILL_EXIT_DURATION seconds to ensure we get a diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index 7ef4738..276410d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -55,13 +55,10 @@ u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg) { u32 value = 0x5a5a5a5a; unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { value = iwl_read32(trans, reg); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); return value; } @@ -71,12 +68,10 @@ void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value) { unsigned long flags; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { iwl_write32(trans, reg, value); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_write_direct32); @@ -114,12 +109,10 @@ u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs) unsigned long flags; u32 val = 0x5a5a5a5a; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { val = __iwl_read_prph(trans, ofs); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); return val; } EXPORT_SYMBOL_GPL(iwl_read_prph); @@ -128,12 +121,10 @@ void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) { unsigned long flags; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { __iwl_write_prph(trans, ofs, val); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_write_prph); @@ -141,13 +132,11 @@ void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) { unsigned long flags; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { __iwl_write_prph(trans, ofs, __iwl_read_prph(trans, ofs) | mask); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_set_bits_prph); @@ -156,13 +145,11 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, { unsigned long flags; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { __iwl_write_prph(trans, ofs, (__iwl_read_prph(trans, ofs) & mask) | bits); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_set_bits_mask_prph); @@ -171,12 +158,10 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) unsigned long flags; u32 val; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { val = __iwl_read_prph(trans, ofs); __iwl_write_prph(trans, ofs, (val & ~mask)); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } - spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_clear_bits_prph); diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index d06fc55..ce0c67b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -466,9 +466,7 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) /* Hard-coded periphery absolute address */ if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { - spin_lock_irqsave(&trans->reg_lock, flags); - if (!iwl_trans_grab_nic_access(trans, false)) { - spin_unlock_irqrestore(&trans->reg_lock, flags); + if (!iwl_trans_grab_nic_access(trans, false, &flags)) { return -EIO; } iwl_write32(trans, HBUS_TARG_PRPH_RADDR, @@ -476,8 +474,7 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) for (i = 0; i < size; i += 4) *(u32 *)(tst->mem.addr + i) = iwl_read32(trans, HBUS_TARG_PRPH_RDAT); - iwl_trans_release_nic_access(trans); - spin_unlock_irqrestore(&trans->reg_lock, flags); + iwl_trans_release_nic_access(trans, &flags); } else { /* target memory (SRAM) */ iwl_trans_read_mem(trans, addr, tst->mem.addr, tst->mem.size / 4); @@ -506,19 +503,13 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, /* Periphery writes can be 1-3 bytes long, or DWORDs */ if (size < 4) { memcpy(&val, buf, size); - spin_lock_irqsave(&trans->reg_lock, flags); - if (!iwl_trans_grab_nic_access(trans, false)) { - spin_unlock_irqrestore(&trans->reg_lock, flags); + if (!iwl_trans_grab_nic_access(trans, false, &flags)) return -EIO; - } iwl_write32(trans, HBUS_TARG_PRPH_WADDR, (addr & 0x0000FFFF) | ((size - 1) << 24)); iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); - iwl_trans_release_nic_access(trans); - /* needed after consecutive writes w/o read */ - mmiowb(); - spin_unlock_irqrestore(&trans->reg_lock, flags); + iwl_trans_release_nic_access(trans, &flags); } else { if (size % 4) return -EINVAL; diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index c2b7e85..0a3d4df 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -416,8 +416,11 @@ struct iwl_trans; * the op_mode. May be called several times before start_fw, can't be * called after that. * @set_pmi: set the power pmi state - * @grab_nic_access: wake the NIC to be able to access non-HBUS regs - * @release_nic_access: let the NIC go to sleep + * @grab_nic_access: wake the NIC to be able to access non-HBUS regs. + * Sleeping is not allowed between grab_nic_access and + * release_nic_access. + * @release_nic_access: let the NIC go to sleep. The "flags" parameter + * must be the same one that was sent before to the grab_nic_access. * @set_bits_mask - set SRAM register according to value and mask. */ struct iwl_trans_ops { @@ -461,8 +464,10 @@ struct iwl_trans_ops { void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); - bool (*grab_nic_access)(struct iwl_trans *trans, bool silent); - void (*release_nic_access)(struct iwl_trans *trans); + bool (*grab_nic_access)(struct iwl_trans *trans, bool silent, + unsigned long *flags); + void (*release_nic_access)(struct iwl_trans *trans, + unsigned long *flags); void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask, u32 value); }; @@ -484,7 +489,6 @@ enum iwl_trans_state { * @ops - pointer to iwl_trans_ops * @op_mode - pointer to the op_mode * @cfg - pointer to the configuration - * @reg_lock - protect hw register access * @dev - pointer to struct device * that represents the device * @hw_id: a u32 with the ID of the device / subdevice. * Set during transport allocation. @@ -505,7 +509,6 @@ struct iwl_trans { struct iwl_op_mode *op_mode; const struct iwl_cfg *cfg; enum iwl_trans_state state; - spinlock_t reg_lock; struct device *dev; u32 hw_rev; @@ -771,14 +774,14 @@ iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) trans->ops->set_bits_mask(trans, reg, mask, value); } -#define iwl_trans_grab_nic_access(trans, silent) \ +#define iwl_trans_grab_nic_access(trans, silent, flags) \ __cond_lock(nic_access, \ - likely((trans)->ops->grab_nic_access(trans, silent))) + likely((trans)->ops->grab_nic_access(trans, silent, flags))) static inline void __releases(nic_access) -iwl_trans_release_nic_access(struct iwl_trans *trans) +iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags) { - trans->ops->release_nic_access(trans); + trans->ops->release_nic_access(trans, flags); __release(nic_access); } diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 21395fa..5f6bb4e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -235,6 +235,7 @@ struct iwl_txq { * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes) * @rx_page_order: page order for receive buffer size * @wd_timeout: queue watchdog timeout (jiffies) + * @reg_lock: protect hw register access */ struct iwl_trans_pcie { struct iwl_rxq rxq; @@ -283,6 +284,9 @@ struct iwl_trans_pcie { /* queue watchdog */ unsigned long wd_timeout; + + /*protect hw register */ + spinlock_t reg_lock; }; /** diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 8692494..56d4f72 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -806,11 +806,12 @@ static int iwl_trans_pcie_resume(struct iwl_trans *trans) } #endif /* CONFIG_PM_SLEEP */ -static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent) +static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent, + unsigned long *flags) { int ret; - - lockdep_assert_held(&trans->reg_lock); + struct iwl_trans_pcie *pcie_trans = IWL_TRANS_GET_PCIE_TRANS(trans); + spin_lock_irqsave(&pcie_trans->reg_lock, *flags); /* this bit wakes up the NIC */ __iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL, @@ -846,16 +847,32 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent) WARN_ONCE(1, "Timeout waiting for hardware access (CSR_GP_CNTRL 0x%08x)\n", val); + spin_unlock_irqrestore(&pcie_trans->reg_lock, *flags); return false; } } + /* + * Fool sparse by faking we release the lock - sparse will + * track nic_access anyway. + */ + __release(&pcie_trans->reg_lock); return true; } -static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) +static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans, + unsigned long *flags) { - lockdep_assert_held(&trans->reg_lock); + struct iwl_trans_pcie *pcie_trans = IWL_TRANS_GET_PCIE_TRANS(trans); + + lockdep_assert_held(&pcie_trans->reg_lock); + + /* + * Fool sparse by faking we acquiring the lock - sparse will + * track nic_access anyway. + */ + __acquire(&pcie_trans->reg_lock); + __iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); /* @@ -865,6 +882,7 @@ static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) * scheduled on different CPUs (after we drop reg_lock). */ mmiowb(); + spin_unlock_irqrestore(&pcie_trans->reg_lock, *flags); } static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, @@ -874,16 +892,14 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, int offs, ret = 0; u32 *vals = buf; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); for (offs = 0; offs < dwords; offs++) vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } else { ret = -EBUSY; } - spin_unlock_irqrestore(&trans->reg_lock, flags); return ret; } @@ -894,17 +910,15 @@ static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, int offs, ret = 0; u32 *vals = buf; - spin_lock_irqsave(&trans->reg_lock, flags); - if (iwl_trans_grab_nic_access(trans, false)) { + if (iwl_trans_grab_nic_access(trans, false, &flags)) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals ? vals[offs] : 0); - iwl_trans_release_nic_access(trans); + iwl_trans_release_nic_access(trans, &flags); } else { ret = -EBUSY; } - spin_unlock_irqrestore(&trans->reg_lock, flags); return ret; } @@ -982,11 +996,12 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) static void iwl_trans_pcie_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) { + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); unsigned long flags; - spin_lock_irqsave(&trans->reg_lock, flags); + spin_lock_irqsave(&trans_pcie->reg_lock, flags); __iwl_trans_pcie_set_bits_mask(trans, reg, mask, value); - spin_unlock_irqrestore(&trans->reg_lock, flags); + spin_unlock_irqrestore(&trans_pcie->reg_lock, flags); } static const char *get_fh_string(int cmd) @@ -1467,6 +1482,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans->cfg = cfg; trans_pcie->trans = trans; spin_lock_init(&trans_pcie->irq_lock); + spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); /* W/A - seems to solve weird behavior. We need to remove this if we @@ -1533,7 +1549,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, /* Initialize the wait queue for commands */ init_waitqueue_head(&trans_pcie->wait_command_queue); - spin_lock_init(&trans->reg_lock); snprintf(trans->dev_cmd_pool_name, sizeof(trans->dev_cmd_pool_name), "iwl_cmd_pool:%s", dev_name(trans->dev)); -- cgit v0.10.2 From de66aa63054a6fe348869722221d5cd3463d74a0 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:27 +0200 Subject: Bluetooth: Store UUIDs in the same order that they were added We should be encoding UUIDs to the EIR data in the same order that they were added to the kernel, i.e. each UUID should be added to the end of the UUIDs list. This patch fixes the issue by using list_add_tail instead of list_add for storing the UUIDs. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index e7f944f..4fd45a3 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1330,7 +1330,7 @@ static int add_uuid(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) memcpy(uuid->uuid, cp->uuid, 16); uuid->svc_hint = cp->svc_hint; - list_add(&uuid->list, &hdev->uuids); + list_add_tail(&uuid->list, &hdev->uuids); err = update_class(hdev); if (err < 0) -- cgit v0.10.2 From 4821002ce2baa130666c2d777e0ed30bee6c7702 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:28 +0200 Subject: Bluetooth: Simplify UUIDs clearing code The code for clearing the UUIDs list can be simplified by using list_for_each_entry_safe instead of list_for_each_safe. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index d13ce99..22e77a7 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1183,14 +1183,10 @@ static void hci_discov_off(struct work_struct *work) int hci_uuids_clear(struct hci_dev *hdev) { - struct list_head *p, *n; - - list_for_each_safe(p, n, &hdev->uuids) { - struct bt_uuid *uuid; + struct bt_uuid *uuid, *tmp; - uuid = list_entry(p, struct bt_uuid, list); - - list_del(p); + list_for_each_entry_safe(uuid, tmp, &hdev->uuids, list) { + list_del(&uuid->list); kfree(uuid); } -- cgit v0.10.2 From 83be8eca2e67faaec45280224b798828bbfa69aa Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:29 +0200 Subject: Bluetooth: Keep track of UUID type upon addition The primary purpose of the UUIDs is to enable generation of EIR and AD data. In these data formats the UUIDs are split into separate fields based on whether they're 16, 32 or 128 bit UUIDs. To make the generation of these data fields simpler this patch adds a type member to the bt_uuid struct and assigns a value to it as soon as the UUID is added to the kernel. This way the type doesn't need to be calculated each time the UUID list is later iterated. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index bcf8ffe..90cf75a 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -86,6 +86,7 @@ struct bdaddr_list { struct bt_uuid { struct list_head list; u8 uuid[16]; + u8 size; u8 svc_hint; }; diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4fd45a3..8de6d57 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -435,28 +435,6 @@ static u32 get_current_settings(struct hci_dev *hdev) #define PNP_INFO_SVCLASS_ID 0x1200 -static u8 bluetooth_base_uuid[] = { - 0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80, - 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -}; - -static u16 get_uuid16(u8 *uuid128) -{ - u32 val; - int i; - - for (i = 0; i < 12; i++) { - if (bluetooth_base_uuid[i] != uuid128[i]) - return 0; - } - - val = get_unaligned_le32(&uuid128[12]); - if (val > 0xffff) - return 0; - - return (u16) val; -} - static void create_eir(struct hci_dev *hdev, u8 *data) { u8 *ptr = data; @@ -513,10 +491,10 @@ static void create_eir(struct hci_dev *hdev, u8 *data) list_for_each_entry(uuid, &hdev->uuids, list) { u16 uuid16; - uuid16 = get_uuid16(uuid->uuid); - if (uuid16 == 0) - return; + if (uuid->size != 16) + continue; + uuid16 = get_unaligned_le16(&uuid->uuid[12]); if (uuid16 < 0x1100) continue; @@ -1304,6 +1282,25 @@ unlock: return err; } +static const u8 bluetooth_base_uuid[] = { + 0xfb, 0x34, 0x9b, 0x5f, 0x80, 0x00, 0x00, 0x80, + 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static u8 get_uuid_size(const u8 *uuid) +{ + u32 val; + + if (memcmp(uuid, bluetooth_base_uuid, 12)) + return 128; + + val = get_unaligned_le32(&uuid[12]); + if (val > 0xffff) + return 32; + + return 16; +} + static int add_uuid(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_cp_add_uuid *cp = data; @@ -1329,6 +1326,7 @@ static int add_uuid(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) memcpy(uuid->uuid, cp->uuid, 16); uuid->svc_hint = cp->svc_hint; + uuid->size = get_uuid_size(cp->uuid); list_add_tail(&uuid->list, &hdev->uuids); -- cgit v0.10.2 From 056341c8cb677356eb2c20a82e788ccb51c6a37b Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:30 +0200 Subject: Bluetooth: Simplify UUID removal code The UUID removal code can be simplified by using list_for_each_entry_safe instead of list_for_each_safe. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 8de6d57..1e906d8 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1372,7 +1372,7 @@ static int remove_uuid(struct sock *sk, struct hci_dev *hdev, void *data, { struct mgmt_cp_remove_uuid *cp = data; struct pending_cmd *cmd; - struct list_head *p, *n; + struct bt_uuid *match, *tmp; u8 bt_uuid_any[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; int err, found; @@ -1400,9 +1400,7 @@ static int remove_uuid(struct sock *sk, struct hci_dev *hdev, void *data, found = 0; - list_for_each_safe(p, n, &hdev->uuids) { - struct bt_uuid *match = list_entry(p, struct bt_uuid, list); - + list_for_each_entry_safe(match, tmp, &hdev->uuids, list) { if (memcmp(match->uuid, cp->uuid, 16) != 0) continue; -- cgit v0.10.2 From a10f27cf4272033d148d91ff12bb8f4b67dfaca4 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:31 +0200 Subject: Bluetooth: Simplify UUID16 list generation for EIR There's no need to use two separate loops to generate a UUID list for the EIR data. This patch merges the two loops previously used for the 16-bit UUID list generation into a single loop, thus simplifying the code a great deal. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 1e906d8..02827af 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -438,9 +438,8 @@ static u32 get_current_settings(struct hci_dev *hdev) static void create_eir(struct hci_dev *hdev, u8 *data) { u8 *ptr = data; + u8 *uuids_start; u16 eir_len = 0; - u16 uuid16_list[HCI_MAX_EIR_LENGTH / sizeof(u16)]; - int i, truncated = 0; struct bt_uuid *uuid; size_t name_len; @@ -485,7 +484,7 @@ static void create_eir(struct hci_dev *hdev, u8 *data) ptr += 10; } - memset(uuid16_list, 0, sizeof(uuid16_list)); + uuids_start = NULL; /* Group all UUID16 types */ list_for_each_entry(uuid, &hdev->uuids, list) { @@ -501,39 +500,24 @@ static void create_eir(struct hci_dev *hdev, u8 *data) if (uuid16 == PNP_INFO_SVCLASS_ID) continue; + if (!uuids_start) { + uuids_start = ptr; + uuids_start[0] = 1; + uuids_start[1] = EIR_UUID16_ALL; + ptr += 2; + eir_len += 2; + } + /* Stop if not enough space to put next UUID */ if (eir_len + 2 + sizeof(u16) > HCI_MAX_EIR_LENGTH) { - truncated = 1; + uuids_start[1] = EIR_UUID16_SOME; break; } - /* Check for duplicates */ - for (i = 0; uuid16_list[i] != 0; i++) - if (uuid16_list[i] == uuid16) - break; - - if (uuid16_list[i] == 0) { - uuid16_list[i] = uuid16; - eir_len += sizeof(u16); - } - } - - if (uuid16_list[0] != 0) { - u8 *length = ptr; - - /* EIR Data type */ - ptr[1] = truncated ? EIR_UUID16_SOME : EIR_UUID16_ALL; - - ptr += 2; - eir_len += 2; - - for (i = 0; uuid16_list[i] != 0; i++) { - *ptr++ = (uuid16_list[i] & 0x00ff); - *ptr++ = (uuid16_list[i] & 0xff00) >> 8; - } - - /* EIR Data length */ - *length = (i * sizeof(u16)) + 1; + *ptr++ = (uuid16 & 0x00ff); + *ptr++ = (uuid16 & 0xff00) >> 8; + eir_len += sizeof(uuid16); + uuids_start[0] += sizeof(uuid16); } } -- cgit v0.10.2 From 892bbc5794daac57bff09c584821ed271fa18046 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:32 +0200 Subject: Bluetooth: Remove useless eir_len variable from EIR creation The amount of data encoded so far in the create_eir() function can be calculated simply through the difference between the data and ptr pointer variables. The eir_len variable then becomes essentially useless. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 02827af..5e18d5a 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -439,7 +439,6 @@ static void create_eir(struct hci_dev *hdev, u8 *data) { u8 *ptr = data; u8 *uuids_start; - u16 eir_len = 0; struct bt_uuid *uuid; size_t name_len; @@ -458,7 +457,6 @@ static void create_eir(struct hci_dev *hdev, u8 *data) memcpy(ptr + 2, hdev->dev_name, name_len); - eir_len += (name_len + 2); ptr += (name_len + 2); } @@ -467,7 +465,6 @@ static void create_eir(struct hci_dev *hdev, u8 *data) ptr[1] = EIR_TX_POWER; ptr[2] = (u8) hdev->inq_tx_power; - eir_len += 3; ptr += 3; } @@ -480,7 +477,6 @@ static void create_eir(struct hci_dev *hdev, u8 *data) put_unaligned_le16(hdev->devid_product, ptr + 6); put_unaligned_le16(hdev->devid_version, ptr + 8); - eir_len += 10; ptr += 10; } @@ -505,18 +501,16 @@ static void create_eir(struct hci_dev *hdev, u8 *data) uuids_start[0] = 1; uuids_start[1] = EIR_UUID16_ALL; ptr += 2; - eir_len += 2; } /* Stop if not enough space to put next UUID */ - if (eir_len + 2 + sizeof(u16) > HCI_MAX_EIR_LENGTH) { + if ((ptr - data) + 2 + sizeof(u16) > HCI_MAX_EIR_LENGTH) { uuids_start[1] = EIR_UUID16_SOME; break; } *ptr++ = (uuid16 & 0x00ff); *ptr++ = (uuid16 & 0xff00) >> 8; - eir_len += sizeof(uuid16); uuids_start[0] += sizeof(uuid16); } } -- cgit v0.10.2 From 213202edc9b5ae60eef2a915b83b4aa19b1c3617 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:33 +0200 Subject: Bluetooth: Refactor UUID-16 list generation into its own function We will need to create three separate UUID lists in the EIR data (for 16, 32 and 128 bit UUIDs) so the code is easier to follow if each list is generated in their own function. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 5e18d5a..497928d 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -435,11 +435,51 @@ static u32 get_current_settings(struct hci_dev *hdev) #define PNP_INFO_SVCLASS_ID 0x1200 +static u8 *create_uuid16_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len) +{ + u8 *ptr = data, *uuids_start = NULL; + struct bt_uuid *uuid; + + if (len < 4) + return ptr; + + list_for_each_entry(uuid, &hdev->uuids, list) { + u16 uuid16; + + if (uuid->size != 16) + continue; + + uuid16 = get_unaligned_le16(&uuid->uuid[12]); + if (uuid16 < 0x1100) + continue; + + if (uuid16 == PNP_INFO_SVCLASS_ID) + continue; + + if (!uuids_start) { + uuids_start = ptr; + uuids_start[0] = 1; + uuids_start[1] = EIR_UUID16_ALL; + ptr += 2; + } + + /* Stop if not enough space to put next UUID */ + if ((ptr - data) + sizeof(u16) > len) { + uuids_start[1] = EIR_UUID16_SOME; + break; + } + + *ptr++ = (uuid16 & 0x00ff); + *ptr++ = (uuid16 & 0xff00) >> 8; + uuids_start[0] += sizeof(uuid16); + } + + return ptr; +} + static void create_eir(struct hci_dev *hdev, u8 *data) { u8 *ptr = data; - u8 *uuids_start; - struct bt_uuid *uuid; size_t name_len; name_len = strlen(hdev->dev_name); @@ -480,39 +520,7 @@ static void create_eir(struct hci_dev *hdev, u8 *data) ptr += 10; } - uuids_start = NULL; - - /* Group all UUID16 types */ - list_for_each_entry(uuid, &hdev->uuids, list) { - u16 uuid16; - - if (uuid->size != 16) - continue; - - uuid16 = get_unaligned_le16(&uuid->uuid[12]); - if (uuid16 < 0x1100) - continue; - - if (uuid16 == PNP_INFO_SVCLASS_ID) - continue; - - if (!uuids_start) { - uuids_start = ptr; - uuids_start[0] = 1; - uuids_start[1] = EIR_UUID16_ALL; - ptr += 2; - } - - /* Stop if not enough space to put next UUID */ - if ((ptr - data) + 2 + sizeof(u16) > HCI_MAX_EIR_LENGTH) { - uuids_start[1] = EIR_UUID16_SOME; - break; - } - - *ptr++ = (uuid16 & 0x00ff); - *ptr++ = (uuid16 & 0xff00) >> 8; - uuids_start[0] += sizeof(uuid16); - } + ptr = create_uuid16_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data)); } static int update_eir(struct hci_dev *hdev) -- cgit v0.10.2 From cdf1963f7ba075772b4b5f91f395ed8fb84d0e70 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:34 +0200 Subject: Bluetooth: Add support for 32-bit UUIDs in EIR data This patch adds the necessary code for inserting a list of 32-bit UUIDs into the EIR data. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 497928d..0110a75 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -477,6 +477,39 @@ static u8 *create_uuid16_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len) return ptr; } +static u8 *create_uuid32_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len) +{ + u8 *ptr = data, *uuids_start = NULL; + struct bt_uuid *uuid; + + if (len < 6) + return ptr; + + list_for_each_entry(uuid, &hdev->uuids, list) { + if (uuid->size != 32) + continue; + + if (!uuids_start) { + uuids_start = ptr; + uuids_start[0] = 1; + uuids_start[1] = EIR_UUID32_ALL; + ptr += 2; + } + + /* Stop if not enough space to put next UUID */ + if ((ptr - data) + sizeof(u32) > len) { + uuids_start[1] = EIR_UUID32_SOME; + break; + } + + memcpy(ptr, &uuid->uuid[12], sizeof(u32)); + ptr += sizeof(u32); + uuids_start[0] += sizeof(u32); + } + + return ptr; +} + static void create_eir(struct hci_dev *hdev, u8 *data) { u8 *ptr = data; @@ -521,6 +554,7 @@ static void create_eir(struct hci_dev *hdev, u8 *data) } ptr = create_uuid16_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data)); + ptr = create_uuid32_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data)); } static int update_eir(struct hci_dev *hdev) -- cgit v0.10.2 From c00d575bd550d3d57aeec2522defa0cea589560c Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 00:31:35 +0200 Subject: Bluetooth: Add support for 128-bit UUIDs in EIR data This patch adds the necessary code for encoding a list of 128-bit UUIDs into the EIR data. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 0110a75..fbc8edf 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -510,6 +510,39 @@ static u8 *create_uuid32_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len) return ptr; } +static u8 *create_uuid128_list(struct hci_dev *hdev, u8 *data, ptrdiff_t len) +{ + u8 *ptr = data, *uuids_start = NULL; + struct bt_uuid *uuid; + + if (len < 18) + return ptr; + + list_for_each_entry(uuid, &hdev->uuids, list) { + if (uuid->size != 128) + continue; + + if (!uuids_start) { + uuids_start = ptr; + uuids_start[0] = 1; + uuids_start[1] = EIR_UUID128_ALL; + ptr += 2; + } + + /* Stop if not enough space to put next UUID */ + if ((ptr - data) + 16 > len) { + uuids_start[1] = EIR_UUID128_SOME; + break; + } + + memcpy(ptr, uuid->uuid, 16); + ptr += 16; + uuids_start[0] += 16; + } + + return ptr; +} + static void create_eir(struct hci_dev *hdev, u8 *data) { u8 *ptr = data; @@ -555,6 +588,7 @@ static void create_eir(struct hci_dev *hdev, u8 *data) ptr = create_uuid16_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data)); ptr = create_uuid32_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data)); + ptr = create_uuid128_list(hdev, ptr, HCI_MAX_EIR_LENGTH - (ptr - data)); } static int update_eir(struct hci_dev *hdev) -- cgit v0.10.2 From f0ff92fbfa14c1cf8c0346f1dde9c3eda26d5abf Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 08:32:00 -0600 Subject: Bluetooth: Fix link security setting when powering on If a controller is powered on while the HCI_AUTO_OFF flag is set the link security setting (HCI_LINK_SECURITY) might not be in sync with the actual state of the controller (HCI_AUTH). This patch fixes the issue by checking for inequality between the intended and actual settings and sends a HCI_Write_Auth_Enable command if necessary. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index fbc8edf..ae7585d 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -3073,6 +3073,8 @@ int mgmt_powered(struct hci_dev *hdev, u8 powered) mgmt_pending_foreach(MGMT_OP_SET_POWERED, hdev, settings_rsp, &match); if (powered) { + u8 link_sec; + if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) && !lmp_host_ssp_capable(hdev)) { u8 ssp = 1; @@ -3096,6 +3098,11 @@ int mgmt_powered(struct hci_dev *hdev, u8 powered) sizeof(cp), &cp); } + link_sec = test_bit(HCI_LINK_SECURITY, &hdev->dev_flags); + if (link_sec != test_bit(HCI_AUTH, &hdev->flags)) + hci_send_cmd(hdev, HCI_OP_WRITE_AUTH_ENABLE, + sizeof(link_sec), &link_sec); + if (lmp_bredr_capable(hdev)) { set_bredr_scan(hdev); update_class(hdev); -- cgit v0.10.2 From 3810285cf8cef5c3f9c4334a317b71b876125269 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Sun, 27 Jan 2013 08:32:01 -0600 Subject: Bluetooth: Increment Management interface revision This patch increments the management interface revision due to the various fixes, improvements and other changes that have gone in lately. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index ae7585d..3bd4c41 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -35,7 +35,7 @@ bool enable_hs; #define MGMT_VERSION 1 -#define MGMT_REVISION 2 +#define MGMT_REVISION 3 static const u16 mgmt_commands[] = { MGMT_OP_READ_INDEX_LIST, -- cgit v0.10.2 From 405280887f8fb4e168a1bbc865917bb2b881db95 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 29 Jan 2013 19:59:56 -0300 Subject: Bluetooth: Reduce critical section in sco_conn_ready This patch reduces the critical section protected by sco_conn_lock in sco_conn_ready function. The lock is acquired only when it is really needed. This patch fixes the following lockdep warning which is generated when the host terminates a SCO connection. Today, this warning is a false positive. There is no way those two threads reported by lockdep are running at the same time since hdev->workqueue (where rx_work is queued) is single-thread. However, if somehow this behavior is changed in future, we will have a potential deadlock. ====================================================== [ INFO: possible circular locking dependency detected ] 3.8.0-rc1+ #7 Not tainted ------------------------------------------------------- kworker/u:1H/1018 is trying to acquire lock: (&(&conn->lock)->rlock){+.+...}, at: [] sco_chan_del+0x66/0x190 [bluetooth] but task is already holding lock: (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [] sco_conn_del+0x8a/0xe0 [bluetooth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}: [] lock_acquire+0xb1/0xe0 [] _raw_spin_lock+0x41/0x80 [] sco_connect_cfm+0xbe/0x350 [bluetooth] [] hci_event_packet+0xd3c/0x29b0 [bluetooth] [] hci_rx_work+0x133/0x870 [bluetooth] [] process_one_work+0x2bf/0x4f0 [] worker_thread+0x2b2/0x3e0 [] kthread+0xd1/0xe0 [] ret_from_fork+0x7c/0xb0 -> #0 (&(&conn->lock)->rlock){+.+...}: [] __lock_acquire+0x1465/0x1c70 [] lock_acquire+0xb1/0xe0 [] _raw_spin_lock+0x41/0x80 [] sco_chan_del+0x66/0x190 [bluetooth] [] sco_conn_del+0x9d/0xe0 [bluetooth] [] sco_disconn_cfm+0x53/0x60 [bluetooth] [] hci_disconn_complete_evt.isra.54+0x363/0x3c0 [bluetooth] [] hci_event_packet+0xc7/0x29b0 [bluetooth] [] hci_rx_work+0x133/0x870 [bluetooth] [] process_one_work+0x2bf/0x4f0 [] worker_thread+0x2b2/0x3e0 [] kthread+0xd1/0xe0 [] ret_from_fork+0x7c/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(&(&conn->lock)->rlock); lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(&(&conn->lock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:1H/1018: #0: (hdev->name#2){.+.+.+}, at: [] process_one_work+0x258/0x4f0 #1: ((&hdev->rx_work)){+.+.+.}, at: [] process_one_work+0x258/0x4f0 #2: (&hdev->lock){+.+.+.}, at: [] hci_disconn_complete_evt.isra.54+0x59/0x3c0 [bluetooth] #3: (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [] sco_conn_del+0x8a/0xe0 [bluetooth] stack backtrace: Pid: 1018, comm: kworker/u:1H Not tainted 3.8.0-rc1+ #7 Call Trace: [] print_circular_bug+0x1fb/0x20c [] __lock_acquire+0x1465/0x1c70 [] lock_acquire+0xb1/0xe0 [] ? sco_chan_del+0x66/0x190 [bluetooth] [] _raw_spin_lock+0x41/0x80 [] ? sco_chan_del+0x66/0x190 [bluetooth] [] sco_chan_del+0x66/0x190 [bluetooth] [] sco_conn_del+0x9d/0xe0 [bluetooth] [] sco_disconn_cfm+0x53/0x60 [bluetooth] [] hci_disconn_complete_evt.isra.54+0x363/0x3c0 [bluetooth] [] ? hci_disconn_complete_evt.isra.54+0x40/0x3c0 [bluetooth] [] hci_event_packet+0xc7/0x29b0 [bluetooth] [] ? __dynamic_pr_debug+0x80/0x90 [] ? kfree_skb+0x2d/0x40 [] ? hci_send_to_monitor+0x1a4/0x1c0 [bluetooth] [] hci_rx_work+0x133/0x870 [bluetooth] [] ? process_one_work+0x258/0x4f0 [] process_one_work+0x2bf/0x4f0 [] ? process_one_work+0x258/0x4f0 [] ? worker_thread+0x51/0x3e0 [] ? hci_tx_work+0x800/0x800 [bluetooth] [] worker_thread+0x2b2/0x3e0 [] ? busy_worker_rebind_fn+0x100/0x100 [] kthread+0xd1/0xe0 [] ? flush_kthread_worker+0xc0/0xc0 [] ret_from_fork+0x7c/0xb0 [] ? flush_kthread_worker+0xc0/0xc0 Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 57f250c..b5178d6 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -900,8 +900,6 @@ static void sco_conn_ready(struct sco_conn *conn) BT_DBG("conn %p", conn); - sco_conn_lock(conn); - if (sk) { sco_sock_clear_timer(sk); bh_lock_sock(sk); @@ -909,9 +907,13 @@ static void sco_conn_ready(struct sco_conn *conn) sk->sk_state_change(sk); bh_unlock_sock(sk); } else { + sco_conn_lock(conn); + parent = sco_get_sock_listen(conn->src); - if (!parent) - goto done; + if (!parent) { + sco_conn_unlock(conn); + return; + } bh_lock_sock(parent); @@ -919,7 +921,8 @@ static void sco_conn_ready(struct sco_conn *conn) BTPROTO_SCO, GFP_ATOMIC); if (!sk) { bh_unlock_sock(parent); - goto done; + sco_conn_unlock(conn); + return; } sco_sock_init(sk, parent); @@ -939,10 +942,9 @@ static void sco_conn_ready(struct sco_conn *conn) parent->sk_data_ready(parent, 1); bh_unlock_sock(parent); - } -done: - sco_conn_unlock(conn); + sco_conn_unlock(conn); + } } /* ----- SCO interface with lower layer (HCI) ----- */ -- cgit v0.10.2 From 2b8a9a2e6a2143928819f2fb948d3904746e1582 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Thu, 31 Jan 2013 20:12:10 -0300 Subject: Bluetooth: Remove unneeded locking This patch removes unneeded locking in hci_le_adv_report_evt. There is no need to lock hdev before calling mgmt_device_found. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 0a4fd64..477726a 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3988,8 +3988,6 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb) void *ptr = &skb->data[1]; s8 rssi; - hci_dev_lock(hdev); - while (num_reports--) { struct hci_ev_le_advertising_info *ev = ptr; @@ -3999,8 +3997,6 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb) ptr += sizeof(*ev) + ev->length + 1; } - - hci_dev_unlock(hdev); } static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb) -- cgit v0.10.2 From a3d09356491d637548dbe815ddb966f52ec9e53a Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Fri, 1 Feb 2013 11:21:30 -0300 Subject: Bluetooth: Refactor mgmt_pending_foreach This patch does a trivial refactor in mgmt_pending_foreach function. It replaces list_for_each_safe by list_for_each_entry_safe, simplifying the function. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 3bd4c41..39395c7 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -760,13 +760,9 @@ static void mgmt_pending_foreach(u16 opcode, struct hci_dev *hdev, void *data), void *data) { - struct list_head *p, *n; - - list_for_each_safe(p, n, &hdev->mgmt_pending) { - struct pending_cmd *cmd; - - cmd = list_entry(p, struct pending_cmd, list); + struct pending_cmd *cmd, *tmp; + list_for_each_entry_safe(cmd, tmp, &hdev->mgmt_pending, list) { if (opcode > 0 && cmd->opcode != opcode) continue; -- cgit v0.10.2 From 0255beda59d3b46c06429699d139ad683b33e5f1 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 18 Jan 2013 23:47:19 +0100 Subject: iwl4965: report A-MPDU status This patch is based on "iwlwifi: report A-MPDU status". (12bf6f45d1703858) Since the firmware will give us an A-MPDU bit and only a single PHY information packet for all the subframes in an A-MPDU, we can easily report the minimal A-MPDU information for radiotap. Cc: Stanislaw Gruszka Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index d665a3d..d2d5aae 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -725,6 +725,16 @@ il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) if (rate_n_flags & RATE_MCS_SGI_MSK) rx_status.flag |= RX_FLAG_SHORT_GI; + if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) { + /* We know which subframes of an A-MPDU belong + * together since we get a single PHY response + * from the firmware for all of them. + */ + + rx_status.flag |= RX_FLAG_AMPDU_DETAILS; + rx_status.ampdu_reference = il->_4965.ampdu_ref; + } + il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb, &rx_status); } @@ -736,6 +746,7 @@ il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb) { struct il_rx_pkt *pkt = rxb_addr(rxb); il->_4965.last_phy_res_valid = true; + il->_4965.ampdu_ref++; memcpy(&il->_4965.last_phy_res, pkt->u.raw, sizeof(struct il_rx_phy_res)); } diff --git a/drivers/net/wireless/iwlegacy/commands.h b/drivers/net/wireless/iwlegacy/commands.h index 829d3b9..3b6c994 100644 --- a/drivers/net/wireless/iwlegacy/commands.h +++ b/drivers/net/wireless/iwlegacy/commands.h @@ -1136,6 +1136,7 @@ struct il_wep_cmd { #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) #define RX_RES_PHY_FLAGS_ANTENNA_MSK 0x70 #define RX_RES_PHY_FLAGS_ANTENNA_POS 4 +#define RX_RES_PHY_FLAGS_AGG_MSK cpu_to_le16(1 << 7) #define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) #define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index 37fe553..96f2025 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -1356,6 +1356,7 @@ struct il_priv { struct { struct il_rx_phy_res last_phy_res; bool last_phy_res_valid; + u32 ampdu_ref; struct completion firmware_loading_complete; -- cgit v0.10.2 From 58b27101e16f2a24e901dd9e67c2ab6e5707d6a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 30 Jan 2013 08:46:53 +0100 Subject: bcma: Xflash: reorder includes to make pr_fmt work MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c index dbda91e..19fafcf 100644 --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -5,11 +5,11 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include "bcma_private.h" + #include #include -#include "bcma_private.h" - struct platform_device bcma_nflash_dev = { .name = "bcma_nflash", .num_resources = 0, diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c index 1e694db..e6ed4fe 100644 --- a/drivers/bcma/driver_chipcommon_sflash.c +++ b/drivers/bcma/driver_chipcommon_sflash.c @@ -5,11 +5,11 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include "bcma_private.h" + #include #include -#include "bcma_private.h" - static struct resource bcma_sflash_resource = { .name = "bcma_sflash", .start = BCMA_SOC_FLASH2, -- cgit v0.10.2 From 96ebbe8d019ab50b34fc3499398ab98de8c2d01b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 30 Jan 2013 17:08:03 +0100 Subject: iwlegacy: check for dma mapping errors Handle pci_map_page() errors. This fixes "DMA-API: device driver failed to check map error" warning. Reported-by: Zdenek Kabelac Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 050ce7c..83856d1 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -1001,12 +1001,12 @@ il3945_rx_allocate(struct il_priv *il, gfp_t priority) struct list_head *element; struct il_rx_buf *rxb; struct page *page; + dma_addr_t page_dma; unsigned long flags; gfp_t gfp_mask = priority; while (1) { spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { spin_unlock_irqrestore(&rxq->lock, flags); return; @@ -1035,26 +1035,34 @@ il3945_rx_allocate(struct il_priv *il, gfp_t priority) break; } + /* Get physical address of RB/SKB */ + page_dma = + pci_map_page(il->pci_dev, page, 0, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + + if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { + __free_pages(page, il->hw_params.rx_page_order); + break; + } + spin_lock_irqsave(&rxq->lock, flags); + if (list_empty(&rxq->rx_used)) { spin_unlock_irqrestore(&rxq->lock, flags); + pci_unmap_page(il->pci_dev, page_dma, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); __free_pages(page, il->hw_params.rx_page_order); return; } + element = rxq->rx_used.next; rxb = list_entry(element, struct il_rx_buf, list); list_del(element); - spin_unlock_irqrestore(&rxq->lock, flags); rxb->page = page; - /* Get physical address of RB/SKB */ - rxb->page_dma = - pci_map_page(il->pci_dev, page, 0, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - - spin_lock_irqsave(&rxq->lock, flags); - + rxb->page_dma = page_dma; list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; il->alloc_rxb_page++; @@ -1284,8 +1292,15 @@ il3945_rx_handle(struct il_priv *il) pci_map_page(il->pci_dev, rxb->page, 0, PAGE_SIZE << il->hw_params. rx_page_order, PCI_DMA_FROMDEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; + if (unlikely(pci_dma_mapping_error(il->pci_dev, + rxb->page_dma))) { + __il_free_pages(il, rxb->page); + rxb->page = NULL; + list_add_tail(&rxb->list, &rxq->rx_used); + } else { + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } } else list_add_tail(&rxb->list, &rxq->rx_used); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index d2d5aae..9741ac1 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -319,6 +319,7 @@ il4965_rx_allocate(struct il_priv *il, gfp_t priority) struct list_head *element; struct il_rx_buf *rxb; struct page *page; + dma_addr_t page_dma; unsigned long flags; gfp_t gfp_mask = priority; @@ -356,33 +357,35 @@ il4965_rx_allocate(struct il_priv *il, gfp_t priority) return; } + /* Get physical address of the RB */ + page_dma = + pci_map_page(il->pci_dev, page, 0, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { + __free_pages(page, il->hw_params.rx_page_order); + break; + } + spin_lock_irqsave(&rxq->lock, flags); if (list_empty(&rxq->rx_used)) { spin_unlock_irqrestore(&rxq->lock, flags); + pci_unmap_page(il->pci_dev, page_dma, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); __free_pages(page, il->hw_params.rx_page_order); return; } + element = rxq->rx_used.next; rxb = list_entry(element, struct il_rx_buf, list); list_del(element); - spin_unlock_irqrestore(&rxq->lock, flags); - BUG_ON(rxb->page); - rxb->page = page; - /* Get physical address of the RB */ - rxb->page_dma = - pci_map_page(il->pci_dev, page, 0, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - /* dma address must be no more than 36 bits */ - BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); - /* and also 256 byte aligned! */ - BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); - - spin_lock_irqsave(&rxq->lock, flags); + rxb->page = page; + rxb->page_dma = page_dma; list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; il->alloc_rxb_page++; @@ -4292,8 +4295,16 @@ il4965_rx_handle(struct il_priv *il) pci_map_page(il->pci_dev, rxb->page, 0, PAGE_SIZE << il->hw_params. rx_page_order, PCI_DMA_FROMDEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; + + if (unlikely(pci_dma_mapping_error(il->pci_dev, + rxb->page_dma))) { + __il_free_pages(il, rxb->page); + rxb->page = NULL; + list_add_tail(&rxb->list, &rxq->rx_used); + } else { + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } } else list_add_tail(&rxb->list, &rxq->rx_used); -- cgit v0.10.2 From cd435d561add96edc784bffa08ac447dabb387f8 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Wed, 30 Jan 2013 17:14:13 +0100 Subject: wireless: rt2x00: rt2800usb add/identify ids Devices were taken from Ralink Linux drivers: - RT5370 0x043e, 0x7a32 0x043e, 0x7a42 0x0471, 0x2126 0x0471, 0x2180 0x0471, 0x2181 0x0471, 0x2182 Identify these ones: 0x04da, 0x23f6 in CONFIG_RT2800USB_RT53XX is a Panasonic device 0x07d1, 0x3c17 in RT2800USB_UNKNOWN is a RT3070 0x0586, 0x341a in RT2800USB_UNKNOWN is a RT3070 Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index d686328..42b5b65 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -968,6 +968,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c13) }, { USB_DEVICE(0x07d1, 0x3c15) }, { USB_DEVICE(0x07d1, 0x3c16) }, + { USB_DEVICE(0x07d1, 0x3c17) }, { USB_DEVICE(0x2001, 0x3c1b) }, /* Draytek */ { USB_DEVICE(0x07fa, 0x7712) }, @@ -1115,6 +1116,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Zyxel */ { USB_DEVICE(0x0586, 0x3416) }, { USB_DEVICE(0x0586, 0x3418) }, + { USB_DEVICE(0x0586, 0x341a) }, { USB_DEVICE(0x0586, 0x341e) }, { USB_DEVICE(0x0586, 0x343e) }, #ifdef CONFIG_RT2800USB_RT33XX @@ -1166,6 +1168,7 @@ static struct usb_device_id rt2800usb_device_table[] = { #ifdef CONFIG_RT2800USB_RT53XX /* Arcadyan */ { USB_DEVICE(0x043e, 0x7a12) }, + { USB_DEVICE(0x043e, 0x7a32) }, /* Azurewave */ { USB_DEVICE(0x13d3, 0x3329) }, { USB_DEVICE(0x13d3, 0x3365) }, @@ -1177,16 +1180,20 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x2001, 0x3c1e) }, /* LG innotek */ { USB_DEVICE(0x043e, 0x7a22) }, + { USB_DEVICE(0x043e, 0x7a42) }, /* Panasonic */ { USB_DEVICE(0x04da, 0x1801) }, { USB_DEVICE(0x04da, 0x1800) }, + { USB_DEVICE(0x04da, 0x23f6) }, /* Philips */ { USB_DEVICE(0x0471, 0x2104) }, + { USB_DEVICE(0x0471, 0x2126) }, + { USB_DEVICE(0x0471, 0x2180) }, + { USB_DEVICE(0x0471, 0x2181) }, + { USB_DEVICE(0x0471, 0x2182) }, /* Ralink */ { USB_DEVICE(0x148f, 0x5370) }, { USB_DEVICE(0x148f, 0x5372) }, - /* Unknown */ - { USB_DEVICE(0x04da, 0x23f6) }, #endif #ifdef CONFIG_RT2800USB_UNKNOWN /* @@ -1223,7 +1230,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x18c5, 0x0008) }, /* D-Link */ { USB_DEVICE(0x07d1, 0x3c0b) }, - { USB_DEVICE(0x07d1, 0x3c17) }, /* Encore */ { USB_DEVICE(0x203d, 0x14a1) }, /* Gemtek */ @@ -1261,8 +1267,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x083a, 0xc522) }, { USB_DEVICE(0x083a, 0xd522) }, { USB_DEVICE(0x083a, 0xf511) }, - /* Zyxel */ - { USB_DEVICE(0x0586, 0x341a) }, #endif { 0, } }; -- cgit v0.10.2 From 21fbbca3376f66edd010f5c76ea94e3353bf9a9e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 30 Jan 2013 23:37:41 +0100 Subject: ath9k: report A-MPDU status The ath9k hardware reports whenever an frame was part of an A-MPDU. MAC80211 already provides the necessary API to pass this additional information along to whomever needs it. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 67df864..21e2e42 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -319,6 +319,8 @@ struct ath_rx { struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX]; struct sk_buff *frag; + + u32 ampdu_ref; }; int ath_startrecv(struct ath_softc *sc); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 2af6f19..87497f3 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1123,6 +1123,24 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, #endif } +static void ath9k_apply_ampdu_details(struct ath_softc *sc, + struct ath_rx_status *rs, struct ieee80211_rx_status *rxs) +{ + if (rs->rs_isaggr) { + rxs->flag |= RX_FLAG_AMPDU_DETAILS | RX_FLAG_AMPDU_LAST_KNOWN; + + rxs->ampdu_reference = sc->rx.ampdu_ref; + + if (!rs->rs_moreaggr) { + rxs->flag |= RX_FLAG_AMPDU_IS_LAST; + sc->rx.ampdu_ref++; + } + + if (rs->rs_flags & ATH9K_RX_DELIM_CRC_PRE) + rxs->flag |= RX_FLAG_AMPDU_DELIM_CRC_ERROR; + } +} + int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) { struct ath_buf *bf; @@ -1329,6 +1347,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx == 3) ath_ant_comb_scan(sc, &rs); + ath9k_apply_ampdu_details(sc, &rs, rxs); + ieee80211_rx(hw, skb); requeue_drop_frag: -- cgit v0.10.2 From 62749238d1af581d01169f59ebbde4811c3c3143 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 30 Jan 2013 19:56:01 -0800 Subject: mwifiex: do not reconfigure tx buffer size in firmware while associating It's observed that reconfiguration of tx buffer size before association can cause data path failure in firmware after associated. Although this is only found with PCIe cards, but potentially it could happen with any other interfaces as well. The tx buffer reconfiguration is not really useful in firmware. Let's remove it for all interfaces. Signed-off-by: Bing Zhao Signed-off-by: Avinash Patil Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index 9cd6216..48cc46b 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -400,45 +400,6 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, } /* - * This function reconfigures the Tx buffer size in firmware. - * - * This function prepares a firmware command and issues it, if - * the current Tx buffer size is different from the one requested. - * Maximum configurable Tx buffer size is limited by the HT capability - * field value. - */ -void -mwifiex_cfg_tx_buf(struct mwifiex_private *priv, - struct mwifiex_bssdescriptor *bss_desc) -{ - u16 max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_2K; - u16 tx_buf, curr_tx_buf_size = 0; - - if (bss_desc->bcn_ht_cap) { - if (le16_to_cpu(bss_desc->bcn_ht_cap->cap_info) & - IEEE80211_HT_CAP_MAX_AMSDU) - max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_8K; - else - max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_4K; - } - - tx_buf = min(priv->adapter->max_tx_buf_size, max_amsdu); - - dev_dbg(priv->adapter->dev, "info: max_amsdu=%d, max_tx_buf=%d\n", - max_amsdu, priv->adapter->max_tx_buf_size); - - if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_2K) - curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; - else if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_4K) - curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K; - else if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_8K) - curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_8K; - if (curr_tx_buf_size != tx_buf) - mwifiex_send_cmd_async(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF, - HostCmd_ACT_GEN_SET, 0, &tx_buf); -} - -/* * This function checks if the given pointer is valid entry of * Tx BA Stream table. */ diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h index 46006a5..29a4c02 100644 --- a/drivers/net/wireless/mwifiex/11n.h +++ b/drivers/net/wireless/mwifiex/11n.h @@ -34,8 +34,6 @@ int mwifiex_cmd_11n_cfg(struct host_cmd_ds_command *cmd, u16 cmd_action, int mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, struct mwifiex_bssdescriptor *bss_desc, u8 **buffer); -void mwifiex_cfg_tx_buf(struct mwifiex_private *priv, - struct mwifiex_bssdescriptor *bss_desc); void mwifiex_fill_cap_info(struct mwifiex_private *, u8 radio_type, struct mwifiex_ie_types_htcap *); int mwifiex_set_get_11n_htcap_cfg(struct mwifiex_private *priv, diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index f0a634d..a537297 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -398,8 +398,6 @@ int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv, pos = (u8 *) assoc; - mwifiex_cfg_tx_buf(priv, bss_desc); - cmd->command = cpu_to_le16(HostCmd_CMD_802_11_ASSOCIATE); /* Save so we know which BSS Desc to use in the response handler */ -- cgit v0.10.2 From 5e3175fb6755a3d4ec073c0e739581b23b3855dc Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 30 Jan 2013 19:56:02 -0800 Subject: mwifiex: remove max_tx_buf_size max_tx_buf_size is not used any more after reconfiguration of tx buffer size has been removed. Also add missing curr_tx_buf_size update while dumping debug info via debugfs. Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/README b/drivers/net/wireless/mwifiex/README index b55bade..3d64613 100644 --- a/drivers/net/wireless/mwifiex/README +++ b/drivers/net/wireless/mwifiex/README @@ -121,7 +121,6 @@ info wmm_ac_vi = wmm_ac_be = wmm_ac_bk = - max_tx_buf_size = tx_buf_size = curr_tx_buf_size = ps_mode = <0/1, CAM mode/PS mode> diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c index 46e34aa..753b568 100644 --- a/drivers/net/wireless/mwifiex/debugfs.c +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -58,8 +58,6 @@ static struct mwifiex_debug_data items[] = { item_addr(packets_out[WMM_AC_BE]), 1}, {"wmm_ac_bk", item_size(packets_out[WMM_AC_BK]), item_addr(packets_out[WMM_AC_BK]), 1}, - {"max_tx_buf_size", item_size(max_tx_buf_size), - item_addr(max_tx_buf_size), 1}, {"tx_buf_size", item_size(tx_buf_size), item_addr(tx_buf_size), 1}, {"curr_tx_buf_size", item_size(curr_tx_buf_size), diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index e00b806..820a19c 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -317,7 +317,6 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter) adapter->pm_wakeup_fw_try = false; - adapter->max_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; adapter->curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h index 6095b3e..f3d9d04 100644 --- a/drivers/net/wireless/mwifiex/ioctl.h +++ b/drivers/net/wireless/mwifiex/ioctl.h @@ -178,7 +178,6 @@ struct mwifiex_ds_tx_ba_stream_tbl { struct mwifiex_debug_info { u32 int_counter; u32 packets_out[MAX_NUM_TID]; - u32 max_tx_buf_size; u32 tx_buf_size; u32 curr_tx_buf_size; u32 tx_tbl_num; diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index 51044e3..ac799a0 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -631,7 +631,6 @@ struct mwifiex_adapter { /* spin lock for main process */ spinlock_t main_proc_lock; u32 mwifiex_processing; - u16 max_tx_buf_size; u16 tx_buf_size; u16 curr_tx_buf_size; u32 ioport; diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c index 65c12eb..8470564 100644 --- a/drivers/net/wireless/mwifiex/sta_cmdresp.c +++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c @@ -935,9 +935,8 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no, / MWIFIEX_SDIO_BLOCK_SIZE) * MWIFIEX_SDIO_BLOCK_SIZE; adapter->curr_tx_buf_size = adapter->tx_buf_size; - dev_dbg(adapter->dev, - "cmd: max_tx_buf_size=%d, tx_buf_size=%d\n", - adapter->max_tx_buf_size, adapter->tx_buf_size); + dev_dbg(adapter->dev, "cmd: curr_tx_buf_size=%d\n", + adapter->curr_tx_buf_size); if (adapter->if_ops.update_mp_end_port) adapter->if_ops.update_mp_end_port(adapter, diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c index 0982375..2155397 100644 --- a/drivers/net/wireless/mwifiex/util.c +++ b/drivers/net/wireless/mwifiex/util.c @@ -91,7 +91,7 @@ int mwifiex_get_debug_info(struct mwifiex_private *priv, memcpy(info->packets_out, priv->wmm.packets_out, sizeof(priv->wmm.packets_out)); - info->max_tx_buf_size = (u32) adapter->max_tx_buf_size; + info->curr_tx_buf_size = (u32) adapter->curr_tx_buf_size; info->tx_buf_size = (u32) adapter->tx_buf_size; info->rx_tbl_num = mwifiex_get_rx_reorder_tbl(priv, info->rx_tbl); -- cgit v0.10.2 From c672a3abb79b40e7cd39b50a84ea5c5c772e10fa Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 31 Jan 2013 10:26:44 +0100 Subject: ath9k: Select RELAY for ATH9K_DEBUGFS The spectral scan support activated through ATH9K_DEBUGFS depends on RELAY for the kernel->userspace communication. Not activating RELAY causes build failures. The RELAY is added as select instead of depend to do it similar like the only other user of RELAY: BLK_DEV_IO_TRACE Signed-off-by: Sven Eckelmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 7647ed6..17507dc 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -58,6 +58,7 @@ config ATH9K_DEBUGFS bool "Atheros ath9k debugging" depends on ATH9K select MAC80211_DEBUGFS + select RELAY ---help--- Say Y, if you need access to ath9k's statistics for interrupts, rate control, etc. -- cgit v0.10.2 From bd2ffe14d489ad12024d43bace21c6b6793acd2c Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 31 Jan 2013 10:26:45 +0100 Subject: ath9k: Only process fft samples when ATH9K_DEBUGFS is enabled The code can only be used when ATH9k_DEBUGFS is enabled an not when ATH_DEBUG is activated. Still enabling it would cause build failures. Signed-off-by: Sven Eckelmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 87497f3..6d4a6eb 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1027,7 +1027,7 @@ static s8 fix_rssi_inv_only(u8 rssi_val) static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, struct ath_rx_status *rs, u64 tsf) { -#ifdef CONFIG_ATH_DEBUG +#ifdef CONFIG_ATH9K_DEBUGFS struct ath_hw *ah = sc->sc_ah; u8 bins[SPECTRAL_HT20_NUM_BINS]; u8 *vdata = (u8 *)hdr; -- cgit v0.10.2 From ab2e2fc8909b3ea6b5adf813b23cd76a4a33fbd8 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 31 Jan 2013 10:26:46 +0100 Subject: ath9k: Only add fix_rssi_inv_only when spectral code is used The code is only used when ATH9K_DEBUGFS is activated and causes build warnings when it is still compiled without user. Signed-off-by: Sven Eckelmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6d4a6eb..0fb7932 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1016,12 +1016,14 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, rxs->flag &= ~RX_FLAG_DECRYPTED; } +#ifdef CONFIG_ATH9K_DEBUGFS static s8 fix_rssi_inv_only(u8 rssi_val) { if (rssi_val == 128) rssi_val = 0; return (s8) rssi_val; } +#endif /* returns 1 if this was a spectral frame, even if not handled. */ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, -- cgit v0.10.2 From 00b54182344ea2ca3e570fd8d9803f8e7dc98fb4 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 31 Jan 2013 15:56:56 +0100 Subject: ath9k: Only remove spectral scan relay file when it was created The relay file depends on relayfs. Trying to close this file without having ATH9K_DEBUGFS (and therefore RELAY) activated causes build failures. Signed-off-by: Sven Eckelmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c7d116c..af932c9 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -922,7 +922,7 @@ static void ath9k_deinit_softc(struct ath_softc *sc) ath9k_eeprom_release(sc); - if (sc->rfs_chan_spec_scan) { + if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) { relay_close(sc->rfs_chan_spec_scan); sc->rfs_chan_spec_scan = NULL; } -- cgit v0.10.2 From 128243740923b2b14d16be2545233a75ba4a2c0f Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 31 Jan 2013 10:26:48 +0100 Subject: ath9k: Fix sparse __CHECK_ENDIAN__ for spectral code Signed-off-by: Sven Eckelmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 21e2e42..97c90b2 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -871,7 +871,7 @@ enum ath_fft_sample_type { struct fft_sample_tlv { u8 type; /* see ath_fft_sample */ - u16 length; + __be16 length; /* type dependent data follows */ } __packed; @@ -880,15 +880,15 @@ struct fft_sample_ht20 { u8 max_exp; - u16 freq; + __be16 freq; s8 rssi; s8 noise; - u16 max_magnitude; + __be16 max_magnitude; u8 max_index; u8 bitmap_weight; - u64 tsf; + __be64 tsf; u8 data[SPECTRAL_HT20_NUM_BINS]; } __packed; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 0fb7932..2d0fd17 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1038,6 +1038,7 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, struct ath_ht20_mag_info *mag_info; int len = rs->rs_datalen; int dc_pos; + u16 length, max_magnitude; /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT @@ -1065,8 +1066,8 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, return 1; fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; - fft_sample.tlv.length = sizeof(fft_sample) - sizeof(fft_sample.tlv); - fft_sample.tlv.length = __cpu_to_be16(fft_sample.tlv.length); + length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + fft_sample.tlv.length = __cpu_to_be16(length); fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); @@ -1112,8 +1113,8 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); fft_sample.max_exp = mag_info->max_exp & 0xf; - fft_sample.max_magnitude = spectral_max_magnitude(mag_info->all_bins); - fft_sample.max_magnitude = __cpu_to_be16(fft_sample.max_magnitude); + max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_magnitude = __cpu_to_be16(max_magnitude); fft_sample.max_index = spectral_max_index(mag_info->all_bins); fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); fft_sample.tsf = __cpu_to_be64(tsf); -- cgit v0.10.2 From c67ba5e5801f912e39fbbfaddbf118abd64ef271 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 31 Jan 2013 10:26:49 +0100 Subject: ath9k: Remove unused variables in ath_mci_cleanup Leaving the unused variables ath_mci_cleanup causes build warnings. Signed-off-by: Sven Eckelmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c index d207433..815bee2 100644 --- a/drivers/net/wireless/ath/ath9k/mci.c +++ b/drivers/net/wireless/ath/ath9k/mci.c @@ -474,8 +474,6 @@ void ath_mci_cleanup(struct ath_softc *sc) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_hw *ah = sc->sc_ah; - struct ath_mci_coex *mci = &sc->mci_coex; - struct ath_mci_buf *buf = &mci->sched_buf; ar9003_mci_cleanup(ah); -- cgit v0.10.2 From 97cc019ee56d52005ea4544af17bef268c464862 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 1 Feb 2013 08:46:56 +0100 Subject: bcma: cc: fix (and rename) define of NAND flash type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 9a0e3fa..6a299f4 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -27,7 +27,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ -#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ +#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 -- cgit v0.10.2 From c4806014ada1b799388d6188bc11fe5dc720c829 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Fri, 1 Feb 2013 14:28:49 +0100 Subject: wireless: rt2x00: rt2800pci add id 0x1814,0x359f is a RT3592 802.11a/b/g/n 2x2 WiFi Adapter support added by 872834dfb38edc6f72cfc783a5ce78f2a9f36ec5 Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 0e8d170..48a01aa 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1152,6 +1152,7 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1814, 0x3562) }, { PCI_DEVICE(0x1814, 0x3592) }, { PCI_DEVICE(0x1814, 0x3593) }, + { PCI_DEVICE(0x1814, 0x359f) }, #endif #ifdef CONFIG_RT2800PCI_RT53XX { PCI_DEVICE(0x1814, 0x5360) }, -- cgit v0.10.2 From d221ad1a8aa281aec505441602dd9f315d31cfb9 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 1 Feb 2013 10:40:22 -0600 Subject: rtlwifi: Fix many compile warnings when using W=1 Many warnings like the following arise from a build with W=1 on the make line: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Changing the overall debug level storage from unsigned to signed fixes these. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index 21a5f4f..f13258a 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -1702,7 +1702,7 @@ struct rtl_works { struct rtl_debug { u32 dbgp_type[DBGP_TYPE_MAX]; - u32 global_debuglevel; + int global_debuglevel; u64 global_debugcomponents; /* add for proc debug */ -- cgit v0.10.2 From 829323cd92d27d7acf128879c96ff1ab34120649 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 1 Feb 2013 10:40:23 -0600 Subject: rtlwifi: Fix warnings in usb.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building this driver with "make W=1" results in the following 2 warnings: drivers/net/wireless/rtlwifi/usb.c:829:21: warning: variable ‘urb_list’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/usb.c:828:23: warning: variable ‘skb_list’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f2ecdeb..af5423c 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -825,8 +825,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, u32 ep_num; struct urb *_urb = NULL; struct sk_buff *_skb = NULL; - struct sk_buff_head *skb_list; - struct usb_anchor *urb_list; WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl); if (unlikely(IS_USB_STOP(rtlusb))) { @@ -836,7 +834,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, return; } ep_num = rtlusb->ep_map.ep_mapping[qnum]; - skb_list = &rtlusb->tx_skb_queue[ep_num]; _skb = skb; _urb = _rtl_usb_tx_urb_setup(hw, _skb, ep_num); if (unlikely(!_urb)) { @@ -844,7 +841,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, "Can't allocate urb. Drop skb!\n"); return; } - urb_list = &rtlusb->tx_pending[ep_num]; _rtl_submit_tx_urb(hw, _urb); } -- cgit v0.10.2 From 8a8e31cc22739d1a5780591c008940292edcde87 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 1 Feb 2013 10:40:24 -0600 Subject: rtlwifi: rtl8192c: Fix W=1 warning When this driver is built with "make W=1", the following warning occurs: drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:907:4: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c index 1cdf5a2..b793a65 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c @@ -669,7 +669,8 @@ static void rtl92c_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw u8 thermalvalue, delta, delta_lck, delta_iqk; long ele_a, ele_d, temp_cck, val_x, value32; long val_y, ele_c = 0; - u8 ofdm_index[2], cck_index = 0, ofdm_index_old[2], cck_index_old = 0; + u8 ofdm_index[2], ofdm_index_old[2], cck_index_old = 0; + s8 cck_index = 0; int i; bool is2t = IS_92C_SERIAL(rtlhal->version); s8 txpwr_level[2] = {0, 0}; -- cgit v0.10.2 From 0b948341f398646b0d59d746800fbbf3656886e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 1 Feb 2013 10:40:25 -0600 Subject: rtlwifi: rtl8192cu: Fix W=1 build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When this driver is built with "make W=1", the following warning is output: drivers/net/wireless/rtlwifi/rtl8192cu/sw.c:56:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index b7e6607..d9e659f 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -76,7 +76,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) GFP_KERNEL, hw, rtl_fw_cb); - return 0; + return err; } static void rtl92cu_deinit_sw_vars(struct ieee80211_hw *hw) -- cgit v0.10.2 From 8925d518663628f769173d3586c66987fdd3ab61 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 1 Feb 2013 10:40:26 -0600 Subject: rtlwifi: rtl8192de: Fix W=1 build warnings when this driver is built with "make W=1", the following warning is printed: drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1058:5: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c index fd8df23..5251fb8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c @@ -841,9 +841,9 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter( long ele_a = 0, ele_d, temp_cck, val_x, value32; long val_y, ele_c = 0; u8 ofdm_index[2]; - u8 cck_index = 0; + s8 cck_index = 0; u8 ofdm_index_old[2]; - u8 cck_index_old = 0; + s8 cck_index_old = 0; u8 index; int i; bool is2t = IS_92D_SINGLEPHY(rtlhal->version); -- cgit v0.10.2 From b26f5f09ebdeb85ab152344cc1d6d484a3ce967d Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 1 Feb 2013 10:40:27 -0600 Subject: rtlwifi: rtl8723ae: Fix W=1 compile warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Whe this driver is built with "make W=1", the following warnings are output: drivers/net/wireless/rtlwifi/rtl8723ae/fw.c:515:5: warning: variable ‘own’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c:1436:5: warning: variable ‘bt_retry_cnt’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:706:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:2033:41: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:620:23: warning: variable ‘radiob_arraylen’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:619:7: warning: variable ‘radiob_array_table’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:617:7: warning: variable ‘rtstatus’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1534:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1716:6: warning: variable ‘reg_ecc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:61: warning: variable ‘reg_ec4’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:34: warning: variable ‘reg_eac’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/trx.c:247:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c index 3b71dab..35cb8f8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c @@ -512,7 +512,6 @@ static bool _rtl8723ae_cmd_send_packet(struct ieee80211_hw *hw, struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl8192_tx_ring *ring; struct rtl_tx_desc *pdesc; - u8 own; unsigned long flags; struct sk_buff *pskb = NULL; @@ -525,7 +524,6 @@ static bool _rtl8723ae_cmd_send_packet(struct ieee80211_hw *hw, spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags); pdesc = &ring->desc[0]; - own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc, true, HW_DESC_OWN); rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *) pdesc, 1, 1, skb); diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c index 887d521..68c2834 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c @@ -1433,7 +1433,6 @@ static void _rtl8723ae_dm_bt_coexist_2_ant(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_hal *rtlhal = rtl_hal(rtlpriv); struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw); - u8 bt_retry_cnt; u8 bt_info_original; RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_DMESG, "[BTCoex] Get bt info by fw!!\n"); @@ -1445,7 +1444,6 @@ static void _rtl8723ae_dm_bt_coexist_2_ant(struct ieee80211_hw *hw) "[BTCoex] c2h for btInfo not rcvd yet!!\n"); } - bt_retry_cnt = rtlhal->hal_coex_8723.bt_retry_cnt; bt_info_original = rtlhal->hal_coex_8723.c2h_bt_info_original; /* when bt inquiry or page scan, we have to set h2c 0x25 diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c index 0a8c038..1498048 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c @@ -703,11 +703,9 @@ static void _rtl8723ae_hw_configure(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); u8 reg_bw_opmode; - u32 reg_ratr, reg_prsr; + u32 reg_prsr; reg_bw_opmode = BW_OPMODE_20MHZ; - reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG | - RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS; reg_prsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8); @@ -2030,7 +2028,7 @@ bool rtl8723ae_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_phy *rtlphy = &(rtlpriv->phy); - enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate; + enum rf_pwrstate e_rfpowerstate_toset; u8 u1tmp; bool actuallyset = false; @@ -2049,8 +2047,6 @@ bool rtl8723ae_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) spin_unlock(&rtlpriv->locks.rf_ps_lock); } - cur_rfstate = ppsc->rfpwr_state; - rtl_write_byte(rtlpriv, REG_GPIO_IO_SEL_2, rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL_2)&~(BIT(1))); diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c index 3d8536b..eafbb18 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c @@ -614,17 +614,11 @@ bool rtl8723ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, { struct rtl_priv *rtlpriv = rtl_priv(hw); int i; - bool rtstatus = true; u32 *radioa_array_table; - u32 *radiob_array_table; - u16 radioa_arraylen, radiob_arraylen; + u16 radioa_arraylen; radioa_arraylen = Rtl8723ERADIOA_1TARRAYLENGTH; radioa_array_table = RTL8723E_RADIOA_1TARRAY; - radiob_arraylen = RTL8723E_RADIOB_1TARRAYLENGTH; - radiob_array_table = RTL8723E_RADIOB_1TARRAY; - - rtstatus = true; switch (rfpath) { case RF90_PATH_A: @@ -1531,11 +1525,8 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, 0x522, 0x550, 0x551, 0x040 }; const u32 retrycount = 2; - u32 bbvalue; if (t == 0) { - bbvalue = rtl_get_bbreg(hw, 0x800, MASKDWORD); - phy_save_adda_regs(hw, adda_reg, rtlphy->adda_backup, 16); phy_save_mac_regs(hw, iqk_mac_reg, rtlphy->iqk_mac_backup); } @@ -1712,8 +1703,7 @@ void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery) long result[4][8]; u8 i, final_candidate; bool patha_ok, pathb_ok; - long reg_e94, reg_e9c, reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, - reg_ecc, reg_tmp = 0; + long reg_e94, reg_e9c, reg_ea4, reg_eb4, reg_ebc, reg_tmp = 0; bool is12simular, is13simular, is23simular; bool start_conttx = false, singletone = false; u32 iqk_bb_reg[10] = { @@ -1780,21 +1770,15 @@ void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery) reg_e94 = result[i][0]; reg_e9c = result[i][1]; reg_ea4 = result[i][2]; - reg_eac = result[i][3]; reg_eb4 = result[i][4]; reg_ebc = result[i][5]; - reg_ec4 = result[i][6]; - reg_ecc = result[i][7]; } if (final_candidate != 0xff) { rtlphy->reg_e94 = reg_e94 = result[final_candidate][0]; rtlphy->reg_e9c = reg_e9c = result[final_candidate][1]; reg_ea4 = result[final_candidate][2]; - reg_eac = result[final_candidate][3]; rtlphy->reg_eb4 = reg_eb4 = result[final_candidate][4]; rtlphy->reg_ebc = reg_ebc = result[final_candidate][5]; - reg_ec4 = result[final_candidate][6]; - reg_ecc = result[final_candidate][7]; patha_ok = pathb_ok = true; } else { rtlphy->reg_e94 = rtlphy->reg_eb4 = 0x100; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index ce8ad12..b1fd2b3 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -244,7 +244,6 @@ static void _rtl8723ae_translate_rx_signal_stuff(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr; u8 *tmp_buf; u8 *praddr; - u8 *psaddr; __le16 fc; u16 type; bool packet_matchbssid, packet_toself, packet_beacon = false; @@ -255,7 +254,6 @@ static void _rtl8723ae_translate_rx_signal_stuff(struct ieee80211_hw *hw, fc = hdr->frame_control; type = WLAN_FC_GET_TYPE(fc); praddr = hdr->addr1; - psaddr = ieee80211_get_SA(hdr); packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) && (!compare_ether_addr(mac->bssid, -- cgit v0.10.2 From 7614fe8888840a78ad4730d82adcc679c1af1894 Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Wed, 30 Jan 2013 07:00:12 +0000 Subject: bnx2x: Force link UP when the interface is in LOOPBACK mode When the interface does not have carrier but when it's put into loopback mode (for tests), it does not make sense to not have the carrier. So force it! Signed-off-by: Mahesh Bandewar Acked-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 859df75..c6da77f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -4748,6 +4748,12 @@ void bnx2x_link_status_update(struct link_params *params, vars->link_status = REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, port_mb[port].link_status)); + + /* Force link UP in non LOOPBACK_EXT loopback mode(s) */ + if (bp->link_params.loopback_mode != LOOPBACK_NONE && + bp->link_params.loopback_mode != LOOPBACK_EXT) + vars->link_status |= LINK_STATUS_LINK_UP; + if (bnx2x_eee_has_cap(params)) vars->eee_status = REG_RD(bp, params->shmem2_base + offsetof(struct shmem2_region, -- cgit v0.10.2 From 7bc486460fe22a93e08b1dc4dce8318e3bc2db50 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 30 Jan 2013 22:14:10 +0000 Subject: qlcnic: silence false positive overflow warning We actually store the MAC address as well as the board_name here. The longest board_name is 75 characters so there is more than enough room to hold the 17 character MAC and the ": " divider. But making this buffer larger silences a static checker warning. Signed-off-by: Dan Carpenter Acked-By: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f3deef0..6a59a11 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1813,7 +1813,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct qlcnic_hardware_context *ahw; int err, pci_using_dac = -1; u32 capab2; - char board_name[QLCNIC_MAX_BOARD_NAME_LEN]; + char board_name[QLCNIC_MAX_BOARD_NAME_LEN + 19]; /* MAC + ": " + name */ err = pci_enable_device(pdev); if (err) -- cgit v0.10.2 From cfad1ba87150e198be9ea32367a24e500e59de2c Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 18 Dec 2012 14:53:53 +0100 Subject: NFC: Initial support for Inside Secure microread Inside Secure microread is an HCI based NFC chipset. This initial support includes reader and p2p (Target and initiator) modes. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 80c728b..e570349 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -27,5 +27,6 @@ config NFC_WILINK into the kernel or say M to compile it as module. source "drivers/nfc/pn544/Kconfig" +source "drivers/nfc/microread/Kconfig" endmenu diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index 574bbc0..a189ada0 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_NFC_PN544) += pn544/ +obj-$(CONFIG_NFC_MICROREAD) += microread/ obj-$(CONFIG_NFC_PN533) += pn533.o obj-$(CONFIG_NFC_WILINK) += nfcwilink.o diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig new file mode 100644 index 0000000..5b89d01 --- /dev/null +++ b/drivers/nfc/microread/Kconfig @@ -0,0 +1,13 @@ +config NFC_MICROREAD + tristate "Inside Secure microread NFC driver" + depends on NFC_HCI + select CRC_CCITT + default n + ---help--- + This module contains the main code for Inside Secure microread + NFC chipsets. It implements the chipset HCI logic and hooks into + the NFC kernel APIs. Physical layers will register against it. + + To compile this driver as a module, choose m here. The module will + be called microread. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile new file mode 100644 index 0000000..9ce2c53 --- /dev/null +++ b/drivers/nfc/microread/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Microread HCI based NFC driver +# + +obj-$(CONFIG_NFC_MICROREAD) += microread.o diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c new file mode 100644 index 0000000..3420d83 --- /dev/null +++ b/drivers/nfc/microread/microread.c @@ -0,0 +1,728 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "microread.h" + +/* Proprietary gates, events, commands and registers */ +/* Admin */ +#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE +#define MICROREAD_GATE_ID_MGT 0x01 +#define MICROREAD_GATE_ID_OS 0x02 +#define MICROREAD_GATE_ID_TESTRF 0x03 +#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE +#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE +#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE + +/* Reader */ +#define MICROREAD_GATE_ID_MREAD_GEN 0x10 +#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12 +#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14 +#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15 +#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16 +#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17 +#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18 +#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19 + +/* Card */ +#define MICROREAD_GATE_ID_MCARD_GEN 0x20 +#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21 +#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22 +#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23 +#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24 +#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25 +#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26 +#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27 +#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28 +#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F + +/* P2P */ +#define MICROREAD_GATE_ID_P2P_GEN 0x30 +#define MICROREAD_GATE_ID_P2P_TARGET 0x31 +#define MICROREAD_PAR_P2P_TARGET_MODE 0x01 +#define MICROREAD_PAR_P2P_TARGET_GT 0x04 +#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32 +#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01 +#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03 + +/* Those pipes are created/opened by default in the chip */ +#define MICROREAD_PIPE_ID_LMS 0x00 +#define MICROREAD_PIPE_ID_ADMIN 0x01 +#define MICROREAD_PIPE_ID_MGT 0x02 +#define MICROREAD_PIPE_ID_OS 0x03 +#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04 +#define MICROREAD_PIPE_ID_HDS_IDT 0x05 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C +#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E +#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16 +#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18 +#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B +#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C +#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D +#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E +#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F +#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20 + +/* Events */ +#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D +#define MICROREAD_EMCF_A_ATQA 0 +#define MICROREAD_EMCF_A_SAK 2 +#define MICROREAD_EMCF_A_LEN 3 +#define MICROREAD_EMCF_A_UID 4 +#define MICROREAD_EMCF_A3_ATQA 0 +#define MICROREAD_EMCF_A3_SAK 2 +#define MICROREAD_EMCF_A3_LEN 3 +#define MICROREAD_EMCF_A3_UID 4 +#define MICROREAD_EMCF_B_UID 0 +#define MICROREAD_EMCF_T1_ATQA 0 +#define MICROREAD_EMCF_T1_UID 4 +#define MICROREAD_EMCF_T3_UID 0 +#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED +#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E +#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION +#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F +#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20 +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21 +#define MICROREAD_EVT_MCARD_FIELD_ON 0x11 +#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13 +#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12 +#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14 + +/* Commands */ +#define MICROREAD_CMD_MREAD_EXCHANGE 0x10 +#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F + +/* Hosts IDs */ +#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID +#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID +#define MICROREAD_ELT_ID_SE1 0x03 +#define MICROREAD_ELT_ID_SE2 0x04 +#define MICROREAD_ELT_ID_SE3 0x05 + +static struct nfc_hci_gate microread_gates[] = { + {MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN}, + {MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK}, + {MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT}, + {MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS}, + {MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B}, + {MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A}, + {MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3}, + {MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT}, + {MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS}, + {MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1}, + {MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3}, + {MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET}, + {MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR} +}; + +/* Largest headroom needed for outgoing custom commands */ +#define MICROREAD_CMDS_HEADROOM 2 +#define MICROREAD_CMD_TAILROOM 2 + +struct microread_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; +}; + +static int microread_open(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->enable(info->phy_id); +} + +static void microread_close(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + info->phy_ops->disable(info->phy_id); +} + +static int microread_hci_ready(struct nfc_hci_dev *hdev) +{ + int r; + u8 param[4]; + + param[0] = 0x03; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0x00; + param[1] = 0x03; + param[2] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0xFF; + param[1] = 0xFF; + param[2] = 0x00; + param[3] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL); + + return r; +} + +static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->write(info->phy_id, skb); +} + +static int microread_start_poll(struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols) +{ + int r; + + u8 param[2]; + u8 mode; + + param[0] = 0x00; + param[1] = 0x00; + + if (im_protocols & NFC_PROTO_ISO14443_MASK) + param[0] |= (1 << 2); + + if (im_protocols & NFC_PROTO_ISO14443_B_MASK) + param[0] |= 1; + + if (im_protocols & NFC_PROTO_MIFARE_MASK) + param[1] |= 1; + + if (im_protocols & NFC_PROTO_JEWEL_MASK) + param[0] |= (1 << 1); + + if (im_protocols & NFC_PROTO_FELICA_MASK) + param[0] |= (1 << 5); + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) + param[1] |= (1 << 1); + + if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) { + hdev->gb = nfc_get_local_general_bytes(hdev->ndev, + &hdev->gb_len); + if (hdev->gb == NULL || hdev->gb_len == 0) { + im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + } + } + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); + if (r) + return r; + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_PAR_P2P_INITIATOR_GI, + hdev->gb, hdev->gb_len); + if (r) + return r; + } + + if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_GT, + hdev->gb, hdev->gb_len); + if (r) + return r; + + mode = 0x02; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + } + + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_START_SOME, + param, 2); +} + +static int microread_dep_link_up(struct nfc_hci_dev *hdev, + struct nfc_target *target, u8 comm_mode, + u8 *gb, size_t gb_len) +{ + struct sk_buff *rgb_skb = NULL; + int r; + + r = nfc_hci_get_param(hdev, target->hci_reader_gate, + MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb); + if (r < 0) + return r; + + if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data, + rgb_skb->len); + if (r == 0) + r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode, + NFC_RF_INITIATOR); +exit: + kfree_skb(rgb_skb); + + return r; +} + +static int microread_dep_link_down(struct nfc_hci_dev *hdev) +{ + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); +} + +static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target) +{ + switch (gate) { + case MICROREAD_GATE_ID_P2P_INITIATOR: + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + break; + default: + return -EPROTO; + } + + return 0; +} + +static int microread_complete_target_discovered(struct nfc_hci_dev *hdev, + u8 gate, + struct nfc_target *target) +{ + return 0; +} + +#define MICROREAD_CB_TYPE_READER_ALL 1 + +static void microread_im_transceive_cb(void *context, struct sk_buff *skb, + int err) +{ + struct microread_info *info = context; + + switch (info->async_cb_type) { + case MICROREAD_CB_TYPE_READER_ALL: + if (err == 0) { + if (skb->len == 0) { + err = -EPROTO; + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + -EPROTO); + return; + } + + if (skb->data[skb->len - 1] != 0) { + err = nfc_hci_result_to_errno( + skb->data[skb->len - 1]); + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + err); + return; + } + + skb_trim(skb, skb->len - 1); /* RF Error ind. */ + } + info->async_cb(info->async_cb_context, skb, err); + break; + default: + if (err == 0) + kfree_skb(skb); + break; + } +} + +/* + * Returns: + * <= 0: driver handled the data exchange + * 1: driver doesn't especially handle, please do standard processing + */ +static int microread_im_transceive(struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, data_exchange_cb_t cb, + void *cb_context) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + u8 control_bits; + u16 crc; + + pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate); + + if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) { + *skb_push(skb, 1) = 0; + + return nfc_hci_send_event(hdev, target->hci_reader_gate, + MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF, + skb->data, skb->len); + } + + switch (target->hci_reader_gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + control_bits = 0x1B; + + crc = crc_ccitt(0xffff, skb->data, skb->len); + crc = ~crc; + *skb_put(skb, 1) = crc & 0xff; + *skb_put(skb, 1) = crc >> 8; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + control_bits = 0xDB; + break; + default: + pr_info("Abort im_transceive to invalid gate 0x%x\n", + target->hci_reader_gate); + return 1; + } + + *skb_push(skb, 1) = control_bits; + + info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL; + info->async_cb = cb; + info->async_cb_context = cb_context; + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + MICROREAD_CMD_MREAD_EXCHANGE, + skb->data, skb->len, + microread_im_transceive_cb, info); +} + +static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + int r; + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_EVT_MCARD_EXCHANGE, + skb->data, skb->len); + + kfree_skb(skb); + + return r; +} + +static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate, + struct sk_buff *skb) +{ + struct nfc_target *targets; + int r = 0; + + pr_info("target discovered to gate 0x%x\n", gate); + + targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL); + if (targets == NULL) { + r = -ENOMEM; + goto exit; + } + + targets->hci_reader_gate = gate; + + switch (gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK]; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID], + skb->data[MICROREAD_EMCF_A_LEN]); + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN]; + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK]; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID], + skb->data[MICROREAD_EMCF_A3_LEN]); + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN]; + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + targets->supported_protocols = NFC_PROTO_JEWEL_MASK; + targets->sens_res = + le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]); + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + targets->supported_protocols = NFC_PROTO_FELICA_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8); + targets->nfcid1_len = 8; + break; + default: + pr_info("discard target discovered to gate 0x%x\n", gate); + goto exit_free; + } + + r = nfc_targets_found(hdev->ndev, targets, 1); + +exit_free: + kfree(targets); + +exit: + kfree_skb(skb); + + if (r) + pr_err("Failed to handle discovered target err=%d", r); +} + +static int microread_event_received(struct nfc_hci_dev *hdev, u8 gate, + u8 event, struct sk_buff *skb) +{ + int r; + u8 mode; + + pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate); + + switch (event) { + case MICROREAD_EVT_MREAD_CARD_FOUND: + microread_target_discovered(hdev, gate, skb); + return 0; + + case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len - 1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_MCARD_FIELD_ON: + case MICROREAD_EVT_MCARD_FIELD_OFF: + kfree_skb(skb); + return 0; + + case MICROREAD_EVT_P2P_TARGET_ACTIVATED: + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, skb->data, + skb->len); + + kfree_skb(skb); + break; + + case MICROREAD_EVT_MCARD_EXCHANGE: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len-1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_P2P_TARGET_DEACTIVATED: + kfree_skb(skb); + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + break; + + r = nfc_hci_send_event(hdev, gate, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, + 0); + break; + + default: + return 1; + } + + return r; +} + +static struct nfc_hci_ops microread_hci_ops = { + .open = microread_open, + .close = microread_close, + .hci_ready = microread_hci_ready, + .xmit = microread_xmit, + .start_poll = microread_start_poll, + .dep_link_up = microread_dep_link_up, + .dep_link_down = microread_dep_link_down, + .target_from_gate = microread_target_from_gate, + .complete_target_discovered = microread_complete_target_discovered, + .im_transceive = microread_im_transceive, + .tm_send = microread_tm_send, + .check_presence = NULL, + .event_received = microread_event_received, +}; + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev) +{ + struct microread_info *info; + unsigned long quirks = 0; + u32 protocols, se; + struct nfc_hci_init_data init_data; + int r; + + info = kzalloc(sizeof(struct microread_info), GFP_KERNEL); + if (!info) { + pr_err("Cannot allocate memory for microread_info.\n"); + r = -ENOMEM; + goto err_info_alloc; + } + + info->phy_ops = phy_ops; + info->phy_id = phy_id; + + init_data.gate_count = ARRAY_SIZE(microread_gates); + memcpy(init_data.gates, microread_gates, sizeof(microread_gates)); + + strcpy(init_data.session_id, "MICROREA"); + + set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_NFC_DEP_MASK; + + se = NFC_SE_UICC | NFC_SE_EMBEDDED; + + info->hdev = nfc_hci_allocate_device(µread_hci_ops, &init_data, + quirks, protocols, se, llc_name, + phy_headroom + + MICROREAD_CMDS_HEADROOM, + phy_tailroom + + MICROREAD_CMD_TAILROOM, + phy_payload); + if (!info->hdev) { + pr_err("Cannot allocate nfc hdev.\n"); + r = -ENOMEM; + goto err_alloc_hdev; + } + + nfc_hci_set_clientdata(info->hdev, info); + + r = nfc_hci_register_device(info->hdev); + if (r) + goto err_regdev; + + *hdev = info->hdev; + + return 0; + +err_regdev: + nfc_hci_free_device(info->hdev); + +err_alloc_hdev: + kfree(info); + +err_info_alloc: + return r; +} +EXPORT_SYMBOL(microread_probe); + +void microread_remove(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + nfc_hci_unregister_device(hdev); + nfc_hci_free_device(hdev); + kfree(info); +} +EXPORT_SYMBOL(microread_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h new file mode 100644 index 0000000..64b447a --- /dev/null +++ b/drivers/nfc/microread/microread.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __LOCAL_MICROREAD_H_ +#define __LOCAL_MICROREAD_H_ + +#include + +#define DRIVER_DESC "NFC driver for microread" + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev); + +void microread_remove(struct nfc_hci_dev *hdev); + +#endif /* __LOCAL_MICROREAD_H_ */ diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h new file mode 100644 index 0000000..cfda59b --- /dev/null +++ b/include/linux/platform_data/microread.h @@ -0,0 +1,35 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) 2011 Tieto Poland + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MICROREAD_H +#define _MICROREAD_H + +#include + +#define MICROREAD_DRIVER_NAME "microread" + +/* board config platform data for microread */ +struct microread_nfc_platform_data { + unsigned int rst_gpio; + unsigned int irq_gpio; + unsigned int ioh_gpio; +}; + +#endif /* _MICROREAD_H */ -- cgit v0.10.2 From 71054c7db161b5947de8c2bcb02d5934cbddb722 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 14:56:15 +0100 Subject: NFC: microread: Add i2c physical layer Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig index 5b89d01..cd6744b 100644 --- a/drivers/nfc/microread/Kconfig +++ b/drivers/nfc/microread/Kconfig @@ -11,3 +11,14 @@ config NFC_MICROREAD To compile this driver as a module, choose m here. The module will be called microread. Say N if unsure. + +config NFC_MICROREAD_I2C + tristate "NFC Microread i2c support" + depends on NFC_MICROREAD && I2C && NFC_SHDLC + ---help--- + This module adds support for the i2c interface of adapters using + Inside microread chipsets. Select this if your platform is using + the i2c bus. + + If you choose to build a module, it'll be called microread_i2c. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile index 9ce2c53..74c1851 100644 --- a/drivers/nfc/microread/Makefile +++ b/drivers/nfc/microread/Makefile @@ -2,4 +2,7 @@ # Makefile for Microread HCI based NFC driver # +microread_i2c-objs = i2c.o + obj-$(CONFIG_NFC_MICROREAD) += microread.o +obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c new file mode 100644 index 0000000..1010894 --- /dev/null +++ b/drivers/nfc/microread/i2c.c @@ -0,0 +1,340 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip - i2c layer + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "microread.h" + +#define MICROREAD_I2C_DRIVER_NAME "microread" + +#define MICROREAD_I2C_FRAME_HEADROOM 1 +#define MICROREAD_I2C_FRAME_TAILROOM 1 + +/* framing in HCI mode */ +#define MICROREAD_I2C_LLC_LEN 1 +#define MICROREAD_I2C_LLC_CRC 1 +#define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \ + MICROREAD_I2C_LLC_CRC) +#define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC) +#define MICROREAD_I2C_LLC_MAX_PAYLOAD 29 +#define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \ + MICROREAD_I2C_LLC_MAX_PAYLOAD) + +struct microread_i2c_phy { + struct i2c_client *i2c_dev; + struct nfc_hci_dev *hdev; + + int irq; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define I2C_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static void microread_i2c_add_len_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + int len; + + len = skb->len; + *skb_push(skb, 1) = len; + + for (i = 0; i < skb->len; i++) + crc = crc ^ skb->data[i]; + + *skb_put(skb, 1) = crc; +} + +static void microread_i2c_remove_len_crc(struct sk_buff *skb) +{ + skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM); + skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM); +} + +static int check_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + + for (i = 0; i < skb->len - 1; i++) + crc = crc ^ skb->data[i]; + + if (crc != skb->data[skb->len-1]) { + pr_err(MICROREAD_I2C_DRIVER_NAME + ": CRC error 0x%x != 0x%x\n", + crc, skb->data[skb->len-1]); + + pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__); + + return -EPERM; + } + + return 0; +} + +static int microread_i2c_enable(void *phy_id) +{ + return 0; +} + +static void microread_i2c_disable(void *phy_id) +{ + return; +} + +static int microread_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct microread_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + usleep_range(3000, 6000); + + microread_i2c_add_len_crc(skb); + + I2C_DUMP_SKB("i2c frame written", skb); + + r = i2c_master_send(client, skb->data, skb->len); + + if (r == -EREMOTEIO) { /* Retry, chip was in standby */ + usleep_range(6000, 10000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r >= 0) { + if (r != skb->len) + r = -EREMOTEIO; + else + r = 0; + } + + microread_i2c_remove_len_crc(skb); + + return r; +} + + +static int microread_i2c_read(struct microread_i2c_phy *phy, + struct sk_buff **skb) +{ + int r; + u8 len; + u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1]; + struct i2c_client *client = phy->i2c_dev; + + pr_debug("%s\n", __func__); + + r = i2c_master_recv(client, &len, 1); + if (r != 1) { + dev_err(&client->dev, "cannot read len byte\n"); + return -EREMOTEIO; + } + + if ((len < MICROREAD_I2C_LLC_MIN_SIZE) || + (len > MICROREAD_I2C_LLC_MAX_SIZE)) { + dev_err(&client->dev, "invalid len byte\n"); + pr_err("invalid len byte\n"); + r = -EBADMSG; + goto flush; + } + + *skb = alloc_skb(1 + len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto flush; + } + + *skb_put(*skb, 1) = len; + + r = i2c_master_recv(client, skb_put(*skb, len), len); + if (r != len) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + I2C_DUMP_SKB("cc frame read", *skb); + + r = check_crc(*skb); + if (r != 0) { + kfree_skb(*skb); + r = -EBADMSG; + goto flush; + } + + skb_pull(*skb, 1); + skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM); + + usleep_range(3000, 6000); + + return 0; + +flush: + if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) + r = -EREMOTEIO; + + usleep_range(3000, 6000); + + return r; +} + +static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct microread_i2c_phy *phy = phy_id; + struct i2c_client *client; + struct sk_buff *skb = NULL; + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + client = phy->i2c_dev; + dev_dbg(&client->dev, "IRQ\n"); + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + r = microread_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + nfc_hci_recv_frame(phy->hdev, NULL); + + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + + nfc_hci_recv_frame(phy->hdev, skb); + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = microread_i2c_write, + .enable = microread_i2c_enable, + .disable = microread_i2c_disable, +}; + +static int microread_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct microread_i2c_phy *phy; + struct microread_nfc_platform_data *pdata = + dev_get_platdata(&client->dev); + int r; + + dev_dbg(&client->dev, "client %p", client); + + if (!pdata) { + dev_err(&client->dev, "client %p: missing platform data", + client); + return -EINVAL; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy), + GFP_KERNEL); + if (!phy) { + dev_err(&client->dev, "Can't allocate microread phy"); + return -ENOMEM; + } + + i2c_set_clientdata(client, phy); + phy->i2c_dev = client; + + r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + MICROREAD_I2C_DRIVER_NAME, phy); + if (r) { + dev_err(&client->dev, "Unable to register IRQ handler"); + return r; + } + + r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, + MICROREAD_I2C_FRAME_HEADROOM, + MICROREAD_I2C_FRAME_TAILROOM, + MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev); + if (r < 0) + goto err_irq; + + dev_info(&client->dev, "Probed"); + + return 0; + +err_irq: + free_irq(client->irq, phy); + + return r; +} + +static int microread_i2c_remove(struct i2c_client *client) +{ + struct microread_i2c_phy *phy = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __func__); + + microread_remove(phy->hdev); + + free_irq(client->irq, phy); + + return 0; +} + +static struct i2c_device_id microread_i2c_id[] = { + { MICROREAD_I2C_DRIVER_NAME, 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, microread_i2c_id); + +static struct i2c_driver microread_i2c_driver = { + .driver = { + .name = MICROREAD_I2C_DRIVER_NAME, + }, + .probe = microread_i2c_probe, + .remove = microread_i2c_remove, + .id_table = microread_i2c_id, +}; + +module_i2c_driver(microread_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v0.10.2 From 4f463855c7d5a0ed0faa62497f3006336e74ee16 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 1 Feb 2013 12:09:19 +0000 Subject: stmmac: don't return zero on failure path in stmmac_pci_probe() If stmmac_dvr_probe() fails in stmmac_pci_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds -ENODEV as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 064eaac..19b3a25 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -102,6 +102,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev, priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr); if (!priv) { pr_err("%s: main driver probe failed", __func__); + ret = -ENODEV; goto err_out; } priv->dev->irq = pdev->irq; -- cgit v0.10.2 From eef9e54ce8b8dd08e281e0c399cced807c98959e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 13:09:34 +0100 Subject: mac80211: send deauth when connection is lost If the driver determines the connection is lost, send a deauth frame to the AP anyway just in case it still considers the connection alive. The frame might not go through, but at least we've tried. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4ff52d0..756df39 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1827,8 +1827,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, } EXPORT_SYMBOL(ieee80211_ap_probereq_get); -static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata, - bool transmit_frame) +static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; @@ -1842,7 +1841,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, - transmit_frame, frame_buf); + true, frame_buf); ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; mutex_unlock(&ifmgd->mtx); @@ -1876,7 +1875,7 @@ static void ieee80211_beacon_connection_loss_work(struct work_struct *work) if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) { sdata_info(sdata, "Connection to AP %pM lost\n", ifmgd->bssid); - __ieee80211_disconnect(sdata, false); + __ieee80211_disconnect(sdata); } else { ieee80211_mgd_probe_ap(sdata, true); } @@ -1890,7 +1889,7 @@ static void ieee80211_csa_connection_drop_work(struct work_struct *work) ieee80211_wake_queues_by_reason(&sdata->local->hw, IEEE80211_QUEUE_STOP_REASON_CSA); - __ieee80211_disconnect(sdata, true); + __ieee80211_disconnect(sdata); } void ieee80211_beacon_loss(struct ieee80211_vif *vif) -- cgit v0.10.2 From 682bd38b8ac1fa3e84e84cddd1f1d7eeebce1212 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 13:13:50 +0100 Subject: mac80211: always allow calling ieee80211_connection_loss() With multi-channel, there's a corner case where a driver doesn't receive a beacon soon enough to be able to sync its timers with the AP. In this case, the only recovery (after trying again) is to disconnect from the AP. Allow calling ieee80211_connection_loss() for such cases. To make that possible, modify the work function to not rely on the IEEE80211_HW_CONNECTION_MONITOR flag but use new state kept in the interface instead. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 164fd4b..7da1121 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3877,6 +3877,8 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver * needs to inform if the connection to the AP has been lost. + * The function may also be called if the connection needs to be terminated + * for some other reason, even if %IEEE80211_HW_CONNECTION_MONITOR isn't set. * * This function will cause immediate change to disassociated state, * without connection recovery attempts. diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c9c66de..25a0647 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -391,6 +391,7 @@ struct ieee80211_if_managed { unsigned long probe_timeout; int probe_send_count; bool nullfunc_failed; + bool connection_loss; struct mutex mtx; struct cfg80211_bss *associated; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 756df39..5e188a5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1872,7 +1872,7 @@ static void ieee80211_beacon_connection_loss_work(struct work_struct *work) rcu_read_unlock(); } - if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) { + if (ifmgd->connection_loss) { sdata_info(sdata, "Connection to AP %pM lost\n", ifmgd->bssid); __ieee80211_disconnect(sdata); @@ -1900,6 +1900,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif) trace_api_beacon_loss(sdata); WARN_ON(hw->flags & IEEE80211_HW_CONNECTION_MONITOR); + sdata->u.mgd.connection_loss = false; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } EXPORT_SYMBOL(ieee80211_beacon_loss); @@ -1911,7 +1912,7 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif) trace_api_connection_loss(sdata); - WARN_ON(!(hw->flags & IEEE80211_HW_CONNECTION_MONITOR)); + sdata->u.mgd.connection_loss = true; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } EXPORT_SYMBOL(ieee80211_connection_loss); @@ -3154,6 +3155,7 @@ static void ieee80211_sta_bcn_mon_timer(unsigned long data) if (local->quiescing) return; + sdata->u.mgd.connection_loss = false; ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_connection_loss_work); } -- cgit v0.10.2 From 42745e039312ab4672c60ec584651f0c74e8264f Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 4 Feb 2013 13:53:11 +0200 Subject: cfg80211: expand per-station byte counters to 64bit In per-station statistics, present 32bit counters are too small for practical purposes - with gigabit speeds, it get overlapped every few seconds. Expand counters in the struct station_info to be 64-bit. Driver can still fill only 32-bit and indicate in @filled only bits like STATION_INFO_[TR]X_BYTES; in case driver provides full 64-bit counter, it should also set in @filled bit STATION_INFO_[TR]RX_BYTES64 Netlink sends both 32-bit and 64-bit counters, if present, to not break userspace. Signed-off-by: Vladimir Kondratiev [change to also have 32-bit counters if driver advertises 64-bit] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 63599ab..94a0810 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -672,8 +672,10 @@ struct station_parameters { * @STATION_INFO_SIGNAL: @signal filled * @STATION_INFO_TX_BITRATE: @txrate fields are filled * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) - * @STATION_INFO_RX_PACKETS: @rx_packets filled - * @STATION_INFO_TX_PACKETS: @tx_packets filled + * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value + * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value + * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value + * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -714,6 +716,8 @@ enum station_info_flags { STATION_INFO_LOCAL_PM = 1<<21, STATION_INFO_PEER_PM = 1<<22, STATION_INFO_NONPEER_PM = 1<<23, + STATION_INFO_RX_BYTES64 = 1<<24, + STATION_INFO_TX_BYTES64 = 1<<25, }; /** @@ -835,8 +839,8 @@ struct station_info { u32 filled; u32 connected_time; u32 inactive_time; - u32 rx_bytes; - u32 tx_bytes; + u64 rx_bytes; + u64 tx_bytes; u16 llid; u16 plid; u8 plink_state; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 225a65e..9a2ecdc 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1857,6 +1857,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1909,6 +1911,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_LOCAL_PM, NL80211_STA_INFO_PEER_PM, NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d359734..807d448 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3057,12 +3057,22 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, nla_put_u32(msg, NL80211_STA_INFO_INACTIVE_TIME, sinfo->inactive_time)) goto nla_put_failure; - if ((sinfo->filled & STATION_INFO_RX_BYTES) && + if ((sinfo->filled & (STATION_INFO_RX_BYTES | + STATION_INFO_RX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES, - sinfo->rx_bytes)) + (u32)sinfo->rx_bytes)) goto nla_put_failure; - if ((sinfo->filled & STATION_INFO_TX_BYTES) && + if ((sinfo->filled & (STATION_INFO_TX_BYTES | + NL80211_STA_INFO_TX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, + (u32)sinfo->tx_bytes)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_RX_BYTES64) && + nla_put_u64(msg, NL80211_STA_INFO_RX_BYTES64, + sinfo->rx_bytes)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_TX_BYTES64) && + nla_put_u64(msg, NL80211_STA_INFO_TX_BYTES64, sinfo->tx_bytes)) goto nla_put_failure; if ((sinfo->filled & STATION_INFO_LLID) && -- cgit v0.10.2 From 5622f5bb8dd3cafe0e56014ed03e31957d1b4a03 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 00:26:45 +0100 Subject: cfg80211: refactor hidden SSID finding Instead of duplicating the rbtree functions, pass an argument to the compare function. This removes the code duplication for the two searches. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index ca367c5..cfc4e1a 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -425,34 +425,13 @@ static int cmp_bss_core(struct cfg80211_bss *a, struct cfg80211_bss *b) } static int cmp_bss(struct cfg80211_bss *a, - struct cfg80211_bss *b) -{ - const struct cfg80211_bss_ies *a_ies, *b_ies; - int r; - - r = cmp_bss_core(a, b); - if (r) - return r; - - a_ies = rcu_access_pointer(a->ies); - if (!a_ies) - return -1; - b_ies = rcu_access_pointer(b->ies); - if (!b_ies) - return 1; - - return cmp_ies(WLAN_EID_SSID, - a_ies->data, a_ies->len, - b_ies->data, b_ies->len); -} - -static int cmp_hidden_bss(struct cfg80211_bss *a, struct cfg80211_bss *b) + struct cfg80211_bss *b, + bool hide_ssid) { const struct cfg80211_bss_ies *a_ies, *b_ies; const u8 *ie1; const u8 *ie2; - int i; - int r; + int i, r; r = cmp_bss_core(a, b); if (r) @@ -468,15 +447,13 @@ static int cmp_hidden_bss(struct cfg80211_bss *a, struct cfg80211_bss *b) ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); + if (!ie1 && !ie2) + return 0; + /* - * Key comparator must use same algorithm in any rb-tree - * search function (order is important), otherwise ordering - * of items in the tree is broken and search gives incorrect - * results. This code uses same order as cmp_ies() does. - * - * Note that due to the differring behaviour with hidden SSIDs - * this function only works when "b" is the tree element and - * "a" is the key we're looking for. + * Note that with "hide_ssid", the function returns a match if + * the already-present BSS ("b") is a hidden SSID beacon for + * the new BSS ("a"). */ /* sort missing IE before (left of) present IE */ @@ -485,14 +462,17 @@ static int cmp_hidden_bss(struct cfg80211_bss *a, struct cfg80211_bss *b) if (!ie2) return 1; - /* zero-size SSID is used as an indication of the hidden bss */ - if (!ie2[1]) + /* zero-length SSID is used as an indication of the hidden bss */ + if (hide_ssid && !ie2[1]) return 0; /* sort by length first, then by contents */ if (ie1[1] != ie2[1]) return ie2[1] - ie1[1]; + if (!hide_ssid) + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); + /* * zeroed SSID ie is another indication of a hidden bss; * if it isn't zeroed just return the regular sort value @@ -584,7 +564,7 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, parent = *p; tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); - cmp = cmp_bss(&bss->pub, &tbss->pub); + cmp = cmp_bss(&bss->pub, &tbss->pub, false); if (WARN_ON(!cmp)) { /* will sort of leak this BSS */ @@ -603,30 +583,8 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, static struct cfg80211_internal_bss * rb_find_bss(struct cfg80211_registered_device *dev, - struct cfg80211_internal_bss *res) -{ - struct rb_node *n = dev->bss_tree.rb_node; - struct cfg80211_internal_bss *bss; - int r; - - while (n) { - bss = rb_entry(n, struct cfg80211_internal_bss, rbn); - r = cmp_bss(&res->pub, &bss->pub); - - if (r == 0) - return bss; - else if (r < 0) - n = n->rb_left; - else - n = n->rb_right; - } - - return NULL; -} - -static struct cfg80211_internal_bss * -rb_find_hidden_bss(struct cfg80211_registered_device *dev, - struct cfg80211_internal_bss *res) + struct cfg80211_internal_bss *res, + bool hidden) { struct rb_node *n = dev->bss_tree.rb_node; struct cfg80211_internal_bss *bss; @@ -634,7 +592,7 @@ rb_find_hidden_bss(struct cfg80211_registered_device *dev, while (n) { bss = rb_entry(n, struct cfg80211_internal_bss, rbn); - r = cmp_hidden_bss(&res->pub, &bss->pub); + r = cmp_bss(&res->pub, &bss->pub, hidden); if (r == 0) return bss; @@ -684,7 +642,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, return NULL; } - found = rb_find_bss(dev, tmp); + found = rb_find_bss(dev, tmp, false); if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; @@ -739,7 +697,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, /* TODO: The code is not trying to update existing probe * response bss entries when beacon ies are * getting changed. */ - hidden = rb_find_hidden_bss(dev, tmp); + hidden = rb_find_bss(dev, tmp, true); if (hidden) copy_hidden_ies(tmp, hidden); -- cgit v0.10.2 From 4593c4cbe1c96b3995727dc42f6aa103f4ff5afc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 19:20:03 +0100 Subject: cfg80211: fix BSS list hidden SSID lookup When trying to find a hidden SSID, the lookup function is done wrong; the code is trying to combine the two lookups into one, and as a consequence doesn't always find the entry at all. To understand this, consider a case where multiple BSS entries with the same channel and BSSID exist but have different SSID length. Then comparing against the probe response SSID length is bound to cause problems since the hidden one might be either zeroed out or zero-length. To fix this we need to do two lookups for the two ways to hide SSIDs. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index cfc4e1a..d4fe065 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -424,9 +424,21 @@ static int cmp_bss_core(struct cfg80211_bss *a, struct cfg80211_bss *b) return memcmp(a->bssid, b->bssid, sizeof(a->bssid)); } +/** + * enum bss_compare_mode - BSS compare mode + * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) + * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode + * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode + */ +enum bss_compare_mode { + BSS_CMP_REGULAR, + BSS_CMP_HIDE_ZLEN, + BSS_CMP_HIDE_NUL, +}; + static int cmp_bss(struct cfg80211_bss *a, struct cfg80211_bss *b, - bool hide_ssid) + enum bss_compare_mode mode) { const struct cfg80211_bss_ies *a_ies, *b_ies; const u8 *ie1; @@ -462,27 +474,36 @@ static int cmp_bss(struct cfg80211_bss *a, if (!ie2) return 1; - /* zero-length SSID is used as an indication of the hidden bss */ - if (hide_ssid && !ie2[1]) - return 0; - - /* sort by length first, then by contents */ - if (ie1[1] != ie2[1]) - return ie2[1] - ie1[1]; - - if (!hide_ssid) + switch (mode) { + case BSS_CMP_HIDE_ZLEN: + /* + * In ZLEN mode we assume the BSS entry we're + * looking for has a zero-length SSID. So if + * the one we're looking at right now has that, + * return 0. Otherwise, return the difference + * in length, but since we're looking for the + * 0-length it's really equivalent to returning + * the length of the one we're looking at. + * + * No content comparison is needed as we assume + * the content length is zero. + */ + return ie2[1]; + case BSS_CMP_REGULAR: + default: + /* sort by length first, then by contents */ + if (ie1[1] != ie2[1]) + return ie2[1] - ie1[1]; return memcmp(ie1 + 2, ie2 + 2, ie1[1]); - - /* - * zeroed SSID ie is another indication of a hidden bss; - * if it isn't zeroed just return the regular sort value - * to find the next candidate - */ - for (i = 0; i < ie2[1]; i++) - if (ie2[i + 2]) - return memcmp(ie1 + 2, ie2 + 2, ie1[1]); - - return 0; + case BSS_CMP_HIDE_NUL: + if (ie1[1] != ie2[1]) + return ie2[1] - ie1[1]; + /* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ + for (i = 0; i < ie2[1]; i++) + if (ie2[i + 2]) + return -1; + return 0; + } } struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, @@ -564,7 +585,7 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, parent = *p; tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); - cmp = cmp_bss(&bss->pub, &tbss->pub, false); + cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); if (WARN_ON(!cmp)) { /* will sort of leak this BSS */ @@ -584,7 +605,7 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, static struct cfg80211_internal_bss * rb_find_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *res, - bool hidden) + enum bss_compare_mode mode) { struct rb_node *n = dev->bss_tree.rb_node; struct cfg80211_internal_bss *bss; @@ -592,7 +613,7 @@ rb_find_bss(struct cfg80211_registered_device *dev, while (n) { bss = rb_entry(n, struct cfg80211_internal_bss, rbn); - r = cmp_bss(&res->pub, &bss->pub, hidden); + r = cmp_bss(&res->pub, &bss->pub, mode); if (r == 0) return bss; @@ -642,7 +663,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, return NULL; } - found = rb_find_bss(dev, tmp, false); + found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR); if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; @@ -697,9 +718,14 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, /* TODO: The code is not trying to update existing probe * response bss entries when beacon ies are * getting changed. */ - hidden = rb_find_bss(dev, tmp, true); - if (hidden) + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); + if (hidden) { copy_hidden_ies(tmp, hidden); + } else { + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_NUL); + if (hidden) + copy_hidden_ies(tmp, hidden); + } /* * create a copy -- the "res" variable that is passed in -- cgit v0.10.2 From 3af6341c5378d1ed0905614575ee9ee2e5522c81 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 00:40:20 +0100 Subject: cfg80211: simplify mesh BSS comparison Instead of first checking if a BSS is an MBSS and then doing the comparisons, inline it all into the BSS comparison function. This avoids doing the IE searches twice and is also a lot less code. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d4fe065..1435b97 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -288,26 +288,6 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, } EXPORT_SYMBOL(cfg80211_find_vendor_ie); -static int cmp_ies(u8 num, const u8 *ies1, int len1, const u8 *ies2, int len2) -{ - const u8 *ie1 = cfg80211_find_ie(num, ies1, len1); - const u8 *ie2 = cfg80211_find_ie(num, ies2, len2); - - /* equal if both missing */ - if (!ie1 && !ie2) - return 0; - /* sort missing IE before (left of) present IE */ - if (!ie1) - return -1; - if (!ie2) - return 1; - - /* sort by length first, then by contents */ - if (ie1[1] != ie2[1]) - return ie2[1] - ie1[1]; - return memcmp(ie1 + 2, ie2 + 2, ie1[1]); -} - static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, const u8 *ssid, size_t ssid_len) { @@ -331,29 +311,6 @@ static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, return memcmp(ssidie + 2, ssid, ssid_len) == 0; } -static bool is_mesh_bss(struct cfg80211_bss *a) -{ - const struct cfg80211_bss_ies *ies; - const u8 *ie; - - if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability)) - return false; - - ies = rcu_access_pointer(a->ies); - if (!ies) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_ID, ies->data, ies->len); - if (!ie) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, ies->data, ies->len); - if (!ie) - return false; - - return true; -} - static bool is_mesh(struct cfg80211_bss *a, const u8 *meshid, size_t meshidlen, const u8 *meshcfg) @@ -391,39 +348,6 @@ static bool is_mesh(struct cfg80211_bss *a, sizeof(struct ieee80211_meshconf_ie) - 2) == 0; } -static int cmp_bss_core(struct cfg80211_bss *a, struct cfg80211_bss *b) -{ - const struct cfg80211_bss_ies *a_ies, *b_ies; - int r; - - if (a->channel != b->channel) - return b->channel->center_freq - a->channel->center_freq; - - if (is_mesh_bss(a) && is_mesh_bss(b)) { - a_ies = rcu_access_pointer(a->ies); - if (!a_ies) - return -1; - b_ies = rcu_access_pointer(b->ies); - if (!b_ies) - return 1; - - r = cmp_ies(WLAN_EID_MESH_ID, - a_ies->data, a_ies->len, - b_ies->data, b_ies->len); - if (r) - return r; - return cmp_ies(WLAN_EID_MESH_CONFIG, - a_ies->data, a_ies->len, - b_ies->data, b_ies->len); - } - - /* - * we can't use compare_ether_addr here since we need a < > operator. - * The binary return value of compare_ether_addr isn't enough - */ - return memcmp(a->bssid, b->bssid, sizeof(a->bssid)); -} - /** * enum bss_compare_mode - BSS compare mode * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) @@ -441,13 +365,12 @@ static int cmp_bss(struct cfg80211_bss *a, enum bss_compare_mode mode) { const struct cfg80211_bss_ies *a_ies, *b_ies; - const u8 *ie1; - const u8 *ie2; + const u8 *ie1 = NULL; + const u8 *ie2 = NULL; int i, r; - r = cmp_bss_core(a, b); - if (r) - return r; + if (a->channel != b->channel) + return b->channel->center_freq - a->channel->center_freq; a_ies = rcu_access_pointer(a->ies); if (!a_ies) @@ -456,6 +379,41 @@ static int cmp_bss(struct cfg80211_bss *a, if (!b_ies) return 1; + if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) + ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, + a_ies->data, a_ies->len); + if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) + ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, + b_ies->data, b_ies->len); + if (ie1 && ie2) { + int mesh_id_cmp; + + if (ie1[1] == ie2[1]) + mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); + else + mesh_id_cmp = ie2[1] - ie1[1]; + + ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + a_ies->data, a_ies->len); + ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + b_ies->data, b_ies->len); + if (ie1 && ie2) { + if (mesh_id_cmp) + return mesh_id_cmp; + if (ie1[1] != ie2[1]) + return ie2[1] - ie1[1]; + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); + } + } + + /* + * we can't use compare_ether_addr here since we need a < > operator. + * The binary return value of compare_ether_addr isn't enough + */ + r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); + if (r) + return r; + ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); -- cgit v0.10.2 From 37e0838117084eb957fdf124bf555f4b9933a5a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 08:50:37 +0100 Subject: cfg80211: remove unused cfg80211_get_mesh As Thomas pointed out, cfg80211_get_mesh() is unused and can be removed. Cc: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 94a0810..3ec70e1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3164,10 +3164,6 @@ cfg80211_get_ibss(struct wiphy *wiphy, WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); } -struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, - struct ieee80211_channel *channel, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg); /** * cfg80211_ref_bss - reference BSS struct * @bss: the BSS struct to reference diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 1435b97..3772638 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -311,43 +311,6 @@ static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, return memcmp(ssidie + 2, ssid, ssid_len) == 0; } -static bool is_mesh(struct cfg80211_bss *a, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg) -{ - const struct cfg80211_bss_ies *ies; - const u8 *ie; - - if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability)) - return false; - - ies = rcu_access_pointer(a->ies); - if (!ies) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_ID, ies->data, ies->len); - if (!ie) - return false; - if (ie[1] != meshidlen) - return false; - if (memcmp(ie + 2, meshid, meshidlen)) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, ies->data, ies->len); - if (!ie) - return false; - if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) - return false; - - /* - * Ignore mesh capability (last two bytes of the IE) when - * comparing since that may differ between stations taking - * part in the same mesh. - */ - return memcmp(ie + 2, meshcfg, - sizeof(struct ieee80211_meshconf_ie) - 2) == 0; -} - /** * enum bss_compare_mode - BSS compare mode * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) @@ -503,34 +466,6 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_get_bss); -struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, - struct ieee80211_channel *channel, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg) -{ - struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); - struct cfg80211_internal_bss *bss, *res = NULL; - - spin_lock_bh(&dev->bss_lock); - - list_for_each_entry(bss, &dev->bss_list, list) { - if (channel && bss->pub.channel != channel) - continue; - if (is_mesh(&bss->pub, meshid, meshidlen, meshcfg)) { - res = bss; - kref_get(&res->ref); - break; - } - } - - spin_unlock_bh(&dev->bss_lock); - if (!res) - return NULL; - return &res->pub; -} -EXPORT_SYMBOL(cfg80211_get_mesh); - - static void rb_insert_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { -- cgit v0.10.2 From 3146a7da83ba2dd266ef436d4ac8e7e09bd15825 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 09:03:08 +0100 Subject: mac80211: remove unused SSID from BSS The ssid/ssid_len fields in the private BSS struct are unused, contrary to the comment we do look up the SSID in the few cases we need it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 25a0647..8faf360 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -86,10 +86,6 @@ struct ieee80211_fragment_entry { struct ieee80211_bss { - /* don't want to look up all the time */ - size_t ssid_len; - u8 ssid[IEEE80211_MAX_SSID_LEN]; - u32 device_ts; bool wmm_used; -- cgit v0.10.2 From 50521aa8817e3f6a77eb7aaabdbbb7b5c2fe0ea3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 21:33:19 +0100 Subject: cfg80211: fix BSS IE allocation comment The comment about allocating the IEs together with the BSS struct is no longer true, remove it. Also fix a typo in the same area. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 3772638..34b47b3 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -715,11 +715,8 @@ cfg80211_inform_bss(struct wiphy *wiphy, * Response frame, we need to pick one of the options and only use it * with the driver that does not provide the full Beacon/Probe Response * frame. Use Beacon frame pointer to avoid indicating that this should - * override the iies pointer should we have received an earlier + * override the IEs pointer should we have received an earlier * indication of Probe Response data. - * - * The initial buffer for the IEs is allocated with the BSS entry and - * is located after the private area. */ ies = kmalloc(sizeof(*ies) + ielen, gfp); if (!ies) -- cgit v0.10.2 From 2ca813ad61136896c91a40194452ff665a522711 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:04:14 +0100 Subject: cfg80211: move locking into cfg80211_bss_age There's no reason for it to require external locking, move it into the function. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 34b47b3..1494d94 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -231,15 +231,16 @@ int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, return 0; } -/* must hold dev->bss_lock! */ void cfg80211_bss_age(struct cfg80211_registered_device *dev, unsigned long age_secs) { struct cfg80211_internal_bss *bss; unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC); + spin_lock_bh(&dev->bss_lock); list_for_each_entry(bss, &dev->bss_list, list) bss->ts -= age_jiffies; + spin_unlock_bh(&dev->bss_lock); } void cfg80211_bss_expire(struct cfg80211_registered_device *dev) diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c index 9bf6d5e..73bf39f 100644 --- a/net/wireless/sysfs.c +++ b/net/wireless/sysfs.c @@ -108,9 +108,7 @@ static int wiphy_resume(struct device *dev) int ret = 0; /* Age scan results with time spent in suspend */ - spin_lock_bh(&rdev->bss_lock); cfg80211_bss_age(rdev, get_seconds() - rdev->suspend_at); - spin_unlock_bh(&rdev->bss_lock); if (rdev->ops->resume) { rtnl_lock(); -- cgit v0.10.2 From e54faf29e07b6cc28a44a4f01d7fbc40905a67d3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 11:41:38 +0100 Subject: mac80211: allow transmitting deauth with tainted key When we had a connection for WoWLAN and after resume it needed to be disconnected, the previous commit enabled sending a deauth frame to the AP. This frame would not go through on MFP-enabled networks as the key for it is marked tainted before the frame is transmitted. Allow a tainted key to be used for deauth frames. Worst case, we'll use a wrong key because the PTK was rekeyed while suspended, but more likely the PTK is still fine and the taint flag really only applies to the GTK(s). Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index a2cb6a3..7892b0a 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -594,7 +594,8 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) break; } - if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED)) + if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED && + !ieee80211_is_deauth(hdr->frame_control))) return TX_DROP; if (!skip_hw && tx->key && -- cgit v0.10.2 From 6b684db1db0df40275c7dfcc32a5d48eb72fe4e3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 11:35:29 +0100 Subject: mac80211: send deauth if connection was lost during suspend If the driver determined the connection was lost or that it couldn't securely maintain the connection when coming out of WoWLAN, send a deauth frame to the AP to also let it know. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5e188a5..353b690 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2851,14 +2851,14 @@ static void ieee80211_sta_timer(unsigned long data) } static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, - u8 *bssid, u8 reason) + u8 *bssid, u8 reason, bool tx) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, - false, frame_buf); + tx, frame_buf); mutex_unlock(&ifmgd->mtx); /* @@ -3107,7 +3107,8 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) "No ack for nullfunc frame to AP %pM, disconnecting.\n", bssid); ieee80211_sta_connection_lost(sdata, bssid, - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, + false); } } else if (time_is_after_jiffies(ifmgd->probe_timeout)) run_again(ifmgd, ifmgd->probe_timeout); @@ -3116,7 +3117,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } else if (ifmgd->probe_send_count < max_tries) { mlme_dbg(sdata, "No probe response from AP %pM after %dms, try %d/%i\n", @@ -3135,7 +3136,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } } @@ -3242,7 +3243,8 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) mlme_dbg(sdata, "driver requested disconnect after resume\n"); ieee80211_sta_connection_lost(sdata, ifmgd->associated->bssid, - WLAN_REASON_UNSPECIFIED); + WLAN_REASON_UNSPECIFIED, + true); mutex_unlock(&ifmgd->mtx); return; } -- cgit v0.10.2 From 4b1af4792a2aa686483fc9bb2155f7269fa6399c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:05:43 +0100 Subject: cfg80211: use lockdep to assert lock is held Instead of annotating with a comment, add a lockdep annotation which also serves as documentation. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 1494d94..a56287b 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -41,22 +41,24 @@ static void bss_release(struct kref *ref) kfree(bss); } -/* must hold dev->bss_lock! */ static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { + lockdep_assert_held(&dev->bss_lock); + list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); kref_put(&bss->ref, bss_release); } -/* must hold dev->bss_lock! */ static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, unsigned long expire_time) { struct cfg80211_internal_bss *bss, *tmp; bool expired = false; + lockdep_assert_held(&dev->bss_lock); + list_for_each_entry_safe(bss, tmp, &dev->bss_list, list) { if (atomic_read(&bss->hold)) continue; -- cgit v0.10.2 From 9537f227b44762591a5598b79522789c573d34b3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:19:48 +0100 Subject: cfg80211: remove a local variable This local variable is only used once, so remove it. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index a56287b..23b7e59 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -583,16 +583,15 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { - const struct cfg80211_bss_ies *old, *ies; + const struct cfg80211_bss_ies *old; old = rcu_access_pointer(found->pub.beacon_ies); - ies = rcu_access_pointer(found->pub.ies); rcu_assign_pointer(found->pub.beacon_ies, tmp->pub.beacon_ies); /* Override IEs if they were from a beacon before */ - if (old == ies) + if (old == rcu_access_pointer(found->pub.ies)) rcu_assign_pointer(found->pub.ies, tmp->pub.beacon_ies); -- cgit v0.10.2 From 0532d4f154b87da6361ab90d12f35142d5119dc1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:34:36 +0100 Subject: cfg80211: wrap BSS kref Add inline wrappers for the BSS struct krefs to be able to extend them easily later. Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 23b7e59..36daacb 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -41,6 +41,16 @@ static void bss_release(struct kref *ref) kfree(bss); } +static inline void bss_ref_get(struct cfg80211_internal_bss *bss) +{ + kref_get(&bss->ref); +} + +static inline void bss_ref_put(struct cfg80211_internal_bss *bss) +{ + kref_put(&bss->ref, bss_release); +} + static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { @@ -48,7 +58,7 @@ static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); - kref_put(&bss->ref, bss_release); + bss_ref_put(bss); } static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, @@ -456,7 +466,7 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, continue; if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { res = bss; - kref_get(&res->ref); + bss_ref_get(res); break; } } @@ -649,7 +659,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, dev->bss_generation++; spin_unlock_bh(&dev->bss_lock); - kref_get(&found->ref); + bss_ref_get(found); return found; } @@ -816,7 +826,7 @@ void cfg80211_ref_bss(struct cfg80211_bss *pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - kref_get(&bss->ref); + bss_ref_get(bss); } EXPORT_SYMBOL(cfg80211_ref_bss); @@ -828,7 +838,7 @@ void cfg80211_put_bss(struct cfg80211_bss *pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - kref_put(&bss->ref, bss_release); + bss_ref_put(bss); } EXPORT_SYMBOL(cfg80211_put_bss); -- cgit v0.10.2 From 3f52b7e328c526fa7a592af9bf5772c591ed38a4 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Wed, 30 Jan 2013 18:14:08 +0100 Subject: mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch Signed-off-by: Ivan Bezyazychnyy Signed-off-by: Mike Krinkin Signed-off-by: Max Filippov Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 11c8bc8..7e8a498 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -151,6 +151,11 @@ /* Mesh Control 802.11s */ #define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100 +/* Mesh Power Save Level */ +#define IEEE80211_QOS_CTL_MESH_PS_LEVEL 0x0200 +/* Mesh Receiver Service Period Initiated */ +#define IEEE80211_QOS_CTL_RSPI 0x0400 + /* U-APSD queue for WMM IEs sent by AP */ #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) #define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f @@ -675,11 +680,14 @@ struct ieee80211_meshconf_ie { * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure * is ongoing + * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has + * neighbors in deep sleep mode */ enum mesh_config_capab_flags { IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, + IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40, }; /** diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index b4ecf26..0ecf947 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -258,6 +258,17 @@ config MAC80211_MESH_SYNC_DEBUG Do not select this option. +config MAC80211_MESH_PS_DEBUG + bool "Verbose mesh powersave debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_MESH + ---help--- + Selecting this option causes mac80211 to print out very verbose mesh + powersave debugging messages (when mac80211 is taking part in a + mesh network). + + Do not select this option. + config MAC80211_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile index 4911202..9d7d840 100644 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -39,7 +39,8 @@ mac80211-$(CONFIG_MAC80211_MESH) += \ mesh_pathtbl.o \ mesh_plink.o \ mesh_hwmp.o \ - mesh_sync.o + mesh_sync.o \ + mesh_ps.o mac80211-$(CONFIG_PM) += pm.o diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 661b878..f4f7e76 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -492,7 +492,10 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) #ifdef CONFIG_MAC80211_MESH sinfo->filled |= STATION_INFO_LLID | STATION_INFO_PLID | - STATION_INFO_PLINK_STATE; + STATION_INFO_PLINK_STATE | + STATION_INFO_LOCAL_PM | + STATION_INFO_PEER_PM | + STATION_INFO_NONPEER_PM; sinfo->llid = le16_to_cpu(sta->llid); sinfo->plid = le16_to_cpu(sta->plid); @@ -501,6 +504,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->filled |= STATION_INFO_T_OFFSET; sinfo->t_offset = sta->t_offset; } + sinfo->local_pm = sta->local_pm; + sinfo->peer_pm = sta->peer_pm; + sinfo->nonpeer_pm = sta->nonpeer_pm; #endif } @@ -1262,6 +1268,10 @@ static int sta_apply_parameters(struct ieee80211_local *local, changed = mesh_plink_inc_estab_count( sdata); sta->plink_state = params->plink_state; + + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_set_sta_local_pm(sta, + sdata->u.mesh.mshcfg.power_mode); break; case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: @@ -1273,6 +1283,9 @@ static int sta_apply_parameters(struct ieee80211_local *local, changed = mesh_plink_dec_estab_count( sdata); sta->plink_state = params->plink_state; + + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_local_status_update(sdata); break; default: /* nothing */ @@ -1289,6 +1302,9 @@ static int sta_apply_parameters(struct ieee80211_local *local, break; } } + + if (params->local_pm) + ieee80211_mps_set_sta_local_pm(sta, params->local_pm); #endif } @@ -1777,6 +1793,15 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) conf->dot11MeshHWMPconfirmationInterval = nconf->dot11MeshHWMPconfirmationInterval; + if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) { + conf->power_mode = nconf->power_mode; + ieee80211_mps_local_status_update(sdata); + } + if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) { + conf->dot11MeshAwakeWindowDuration = + nconf->dot11MeshAwakeWindowDuration; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); + } return 0; } diff --git a/net/mac80211/debug.h b/net/mac80211/debug.h index 8f383a5..4ccc5ed 100644 --- a/net/mac80211/debug.h +++ b/net/mac80211/debug.h @@ -44,6 +44,12 @@ #define MAC80211_MESH_SYNC_DEBUG 0 #endif +#ifdef CONFIG_MAC80211_MESH_PS_DEBUG +#define MAC80211_MESH_PS_DEBUG 1 +#else +#define MAC80211_MESH_PS_DEBUG 0 +#endif + #ifdef CONFIG_MAC80211_TDLS_DEBUG #define MAC80211_TDLS_DEBUG 1 #else @@ -151,6 +157,10 @@ do { \ _sdata_dbg(MAC80211_MESH_SYNC_DEBUG, \ sdata, fmt, ##__VA_ARGS__) +#define mps_dbg(sdata, fmt, ...) \ + _sdata_dbg(MAC80211_MESH_PS_DEBUG, \ + sdata, fmt, ##__VA_ARGS__) + #define tdls_dbg(sdata, fmt, ...) \ _sdata_dbg(MAC80211_TDLS_DEBUG, \ sdata, fmt, ##__VA_ARGS__) diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index cbde5cc..059bbb8 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -515,6 +515,9 @@ IEEE80211_IF_FILE(dot11MeshHWMProotInterval, u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC); IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval, u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC); +IEEE80211_IF_FILE(power_mode, u.mesh.mshcfg.power_mode, DEC); +IEEE80211_IF_FILE(dot11MeshAwakeWindowDuration, + u.mesh.mshcfg.dot11MeshAwakeWindowDuration, DEC); #endif #define DEBUGFS_ADD_MODE(name, mode) \ @@ -620,6 +623,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout); MESHPARAMS_ADD(dot11MeshHWMProotInterval); MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval); + MESHPARAMS_ADD(power_mode); + MESHPARAMS_ADD(dot11MeshAwakeWindowDuration); #undef MESHPARAMS_ADD } #endif diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 6fb1168..c7591f7 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -65,7 +65,7 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : "" int res = scnprintf(buf, sizeof(buf), - "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", + "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", TEST(AUTH), TEST(ASSOC), TEST(PS_STA), TEST(PS_DRIVER), TEST(AUTHORIZED), TEST(SHORT_PREAMBLE), @@ -74,7 +74,8 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, TEST(UAPSD), TEST(SP), TEST(TDLS_PEER), TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT), TEST(INSERTED), TEST(RATE_CONTROL), - TEST(TOFFSET_KNOWN)); + TEST(TOFFSET_KNOWN), TEST(MPSP_OWNER), + TEST(MPSP_RECIPIENT)); #undef TEST return simple_read_from_buffer(userbuf, count, ppos, buf, res); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8faf360..5fe9db7 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -590,6 +590,11 @@ struct ieee80211_if_mesh { s64 sync_offset_clockdrift_max; spinlock_t sync_offset_lock; bool adjusting_tbtt; + /* mesh power save */ + enum nl80211_mesh_power_mode nonpeer_pm; + int ps_peers_light_sleep; + int ps_peers_deep_sleep; + struct ps_data ps; }; #ifdef CONFIG_MAC80211_MESH @@ -1185,6 +1190,7 @@ struct ieee802_11_elems { struct ieee80211_meshconf_ie *mesh_config; u8 *mesh_id; u8 *peering; + __le16 *awake_window; u8 *preq; u8 *prep; u8 *perr; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index f920da1..35ac388 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -261,6 +261,9 @@ mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING; *pos |= ifmsh->accepting_plinks ? IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; + /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ + *pos |= ifmsh->ps_peers_deep_sleep ? + IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; *pos++ |= ifmsh->adjusting_tbtt ? IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; *pos++ = 0x00; @@ -286,6 +289,29 @@ mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) return 0; } +int mesh_add_awake_window_ie(struct sk_buff *skb, + struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + u8 *pos; + + /* see IEEE802.11-2012 13.14.6 */ + if (ifmsh->ps_peers_light_sleep == 0 && + ifmsh->ps_peers_deep_sleep == 0 && + ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE) + return 0; + + if (skb_tailroom(skb) < 4) + return -ENOMEM; + + pos = skb_put(skb, 2 + 2); + *pos++ = WLAN_EID_MESH_AWAKE_WINDOW; + *pos++ = 2; + put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos); + + return 0; +} + int mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { @@ -629,6 +655,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); + ieee80211_mps_local_status_update(sdata); + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); @@ -651,6 +679,10 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sta_info_flush(sdata); mesh_path_flush_by_iface(sdata); + /* free all potentially still buffered group-addressed frames */ + local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); + skb_queue_purge(&ifmsh->ps.bc_buf); + del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); del_timer_sync(&sdata->u.mesh.mesh_path_timer); @@ -828,6 +860,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) ieee80211_mesh_path_root_timer, (unsigned long) sdata); INIT_LIST_HEAD(&ifmsh->preq_queue.list); + skb_queue_head_init(&ifmsh->ps.bc_buf); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index aff3015..eb33625 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -222,6 +222,8 @@ int mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); int mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); +int mesh_add_awake_window_ie(struct sk_buff *skb, + struct ieee80211_sub_if_data *sdata); int mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); int mesh_add_ds_params_ie(struct sk_buff *skb, @@ -242,6 +244,21 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); +/* mesh power save */ +void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); +void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm); +void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + struct ieee80211_hdr *hdr); +void ieee80211_mps_sta_status_update(struct sta_info *sta); +void ieee80211_mps_rx_h_sta_process(struct sta_info *sta, + struct ieee80211_hdr *hdr); +void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta, + bool tx, bool acked); +void ieee80211_mps_frame_release(struct sta_info *sta, + struct ieee802_11_elems *elems); + /* Mesh paths */ int mesh_nexthop_lookup(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 6b4603a..f0dd874 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -205,6 +205,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; skb_set_mac_header(skb, 0); skb_set_network_header(skb, 0); @@ -217,6 +218,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, info->control.vif = &sdata->vif; info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; ieee80211_set_qos_hdr(sdata, skb); + ieee80211_mps_set_frame_flags(sdata, NULL, hdr); } /** @@ -1080,6 +1082,10 @@ int mesh_nexthop_resolve(struct sk_buff *skb, u8 *target_addr = hdr->addr3; int err = 0; + /* Nulls are only sent to peers for PS and should be pre-addressed */ + if (ieee80211_is_qos_nullfunc(hdr->frame_control)) + return 0; + rcu_read_lock(); err = mesh_nexthop_lookup(skb, sdata); if (!err) @@ -1151,6 +1157,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb, if (next_hop) { memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN); memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, next_hop, hdr); err = 0; } diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index aa74981..d5786c3 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -212,6 +212,7 @@ void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta) hdr = (struct ieee80211_hdr *) skb->data; memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN); memcpy(hdr->addr2, mpath->sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sta->sdata, sta, hdr); } spin_unlock_irqrestore(&mpath->frame_queue.lock, flags); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 6787d69..fe7c333 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -201,6 +201,9 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; mesh_path_flush_by_nexthop(sta); + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_local_status_update(sdata); + return changed; } @@ -503,6 +506,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, rssi_threshold_check(sta, sdata)) mesh_plink_open(sta); + ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); } @@ -633,6 +637,9 @@ int mesh_plink_open(struct sta_info *sta) "Mesh plink: starting establishment with %pM\n", sta->sta.addr); + /* set the non-peer mode to active during peering */ + ieee80211_mps_local_status_update(sdata); + return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, sta->sta.addr, llid, 0, 0); } @@ -866,6 +873,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m sta->llid = llid; mesh_plink_timer_set(sta, mshcfg->dot11MeshRetryTimeout); + + /* set the non-peer mode to active during peering */ + ieee80211_mps_local_status_update(sdata); + spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, @@ -959,6 +970,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); @@ -998,6 +1012,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CONFIRM, sta->sta.addr, llid, plid, 0); + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c new file mode 100644 index 0000000..b677962 --- /dev/null +++ b/net/mac80211/mesh_ps.c @@ -0,0 +1,585 @@ +/* + * Copyright 2012-2013, Marco Porsch + * Copyright 2012-2013, cozybit Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "mesh.h" +#include "wme.h" + + +/* mesh PS management */ + +/** + * mps_qos_null_get - create pre-addressed QoS Null frame for mesh powersave + */ +static struct sk_buff *mps_qos_null_get(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_hdr *nullfunc; /* use 4addr header */ + struct sk_buff *skb; + int size = sizeof(*nullfunc); + __le16 fc; + + skb = dev_alloc_skb(local->hw.extra_tx_headroom + size + 2); + if (!skb) + return NULL; + skb_reserve(skb, local->hw.extra_tx_headroom); + + nullfunc = (struct ieee80211_hdr *) skb_put(skb, size); + fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC); + ieee80211_fill_mesh_addresses(nullfunc, &fc, sta->sta.addr, + sdata->vif.addr); + nullfunc->frame_control = fc; + nullfunc->duration_id = 0; + /* no address resolution for this frame -> set addr 1 immediately */ + memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); + memset(skb_put(skb, 2), 0, 2); /* append QoS control field */ + ieee80211_mps_set_frame_flags(sdata, sta, nullfunc); + + return skb; +} + +/** + * mps_qos_null_tx - send a QoS Null to indicate link-specific power mode + */ +static void mps_qos_null_tx(struct sta_info *sta) +{ + struct sk_buff *skb; + + skb = mps_qos_null_get(sta); + if (!skb) + return; + + mps_dbg(sta->sdata, "announcing peer-specific power mode to %pM\n", + sta->sta.addr); + + /* don't unintentionally start a MPSP */ + if (!test_sta_flag(sta, WLAN_STA_PS_STA)) { + u8 *qc = ieee80211_get_qos_ctl((void *) skb->data); + + qc[0] |= IEEE80211_QOS_CTL_EOSP; + } + + ieee80211_tx_skb(sta->sdata, skb); +} + +/** + * ieee80211_mps_local_status_update - track status of local link-specific PMs + * + * @sdata: local mesh subif + * + * sets the non-peer power mode and triggers the driver PS (re-)configuration + */ +void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct sta_info *sta; + bool peering = false; + int light_sleep_cnt = 0; + int deep_sleep_cnt = 0; + + rcu_read_lock(); + list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { + if (sdata != sta->sdata) + continue; + + switch (sta->plink_state) { + case NL80211_PLINK_OPN_SNT: + case NL80211_PLINK_OPN_RCVD: + case NL80211_PLINK_CNF_RCVD: + peering = true; + break; + case NL80211_PLINK_ESTAB: + if (sta->local_pm == NL80211_MESH_POWER_LIGHT_SLEEP) + light_sleep_cnt++; + else if (sta->local_pm == NL80211_MESH_POWER_DEEP_SLEEP) + deep_sleep_cnt++; + break; + default: + break; + } + } + rcu_read_unlock(); + + /* + * Set non-peer mode to active during peering/scanning/authentication + * (see IEEE802.11-2012 13.14.8.3). The non-peer mesh power mode is + * deep sleep if the local STA is in light or deep sleep towards at + * least one mesh peer (see 13.14.3.1). Otherwise, set it to the + * user-configured default value. + */ + if (peering) { + mps_dbg(sdata, "setting non-peer PM to active for peering\n"); + ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; + } else if (light_sleep_cnt || deep_sleep_cnt) { + mps_dbg(sdata, "setting non-peer PM to deep sleep\n"); + ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; + } else { + mps_dbg(sdata, "setting non-peer PM to user value\n"); + ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode; + } + + ifmsh->ps_peers_light_sleep = light_sleep_cnt; + ifmsh->ps_peers_deep_sleep = deep_sleep_cnt; +} + +/** + * ieee80211_mps_set_sta_local_pm - set local PM towards a mesh STA + * + * @sta: mesh STA + * @pm: the power mode to set + */ +void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + + mps_dbg(sdata, "local STA operates in mode %d with %pM\n", + pm, sta->sta.addr); + + sta->local_pm = pm; + + /* + * announce peer-specific power mode transition + * (see IEEE802.11-2012 13.14.3.2 and 13.14.3.3) + */ + if (sta->plink_state == NL80211_PLINK_ESTAB) + mps_qos_null_tx(sta); + + ieee80211_mps_local_status_update(sdata); +} + +/** + * ieee80211_mps_set_frame_flags - set mesh PS flags in FC (and QoS Control) + * + * @sdata: local mesh subif + * @sta: mesh STA + * @hdr: 802.11 frame header + * + * see IEEE802.11-2012 8.2.4.1.7 and 8.2.4.5.11 + * + * NOTE: sta must be given when an individually-addressed QoS frame header + * is handled, for group-addressed and management frames it is not used + */ +void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + enum nl80211_mesh_power_mode pm; + u8 *qc; + + if (WARN_ON(is_unicast_ether_addr(hdr->addr1) && + ieee80211_is_data_qos(hdr->frame_control) && + !sta)) + return; + + if (is_unicast_ether_addr(hdr->addr1) && + ieee80211_is_data_qos(hdr->frame_control) && + sta->plink_state == NL80211_PLINK_ESTAB) + pm = sta->local_pm; + else + pm = sdata->u.mesh.nonpeer_pm; + + if (pm == NL80211_MESH_POWER_ACTIVE) + hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_PM); + else + hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); + + if (!ieee80211_is_data_qos(hdr->frame_control)) + return; + + qc = ieee80211_get_qos_ctl(hdr); + + if ((is_unicast_ether_addr(hdr->addr1) && + pm == NL80211_MESH_POWER_DEEP_SLEEP) || + (is_multicast_ether_addr(hdr->addr1) && + sdata->u.mesh.ps_peers_deep_sleep > 0)) + qc[1] |= (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8); + else + qc[1] &= ~(IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8); +} + +/** + * ieee80211_mps_sta_status_update - update buffering status of neighbor STA + * + * @sta: mesh STA + * + * called after change of peering status or non-peer/peer-specific power mode + */ +void ieee80211_mps_sta_status_update(struct sta_info *sta) +{ + enum nl80211_mesh_power_mode pm; + bool do_buffer; + + /* + * use peer-specific power mode if peering is established and the + * peer's power mode is known + */ + if (sta->plink_state == NL80211_PLINK_ESTAB && + sta->peer_pm != NL80211_MESH_POWER_UNKNOWN) + pm = sta->peer_pm; + else + pm = sta->nonpeer_pm; + + do_buffer = (pm != NL80211_MESH_POWER_ACTIVE); + + /* Don't let the same PS state be set twice */ + if (test_sta_flag(sta, WLAN_STA_PS_STA) == do_buffer) + return; + + if (do_buffer) { + set_sta_flag(sta, WLAN_STA_PS_STA); + atomic_inc(&sta->sdata->u.mesh.ps.num_sta_ps); + mps_dbg(sta->sdata, "start PS buffering frames towards %pM\n", + sta->sta.addr); + } else { + ieee80211_sta_ps_deliver_wakeup(sta); + } + + /* clear the MPSP flags for non-peers or active STA */ + if (sta->plink_state != NL80211_PLINK_ESTAB) { + clear_sta_flag(sta, WLAN_STA_MPSP_OWNER); + clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + } else if (!do_buffer) { + clear_sta_flag(sta, WLAN_STA_MPSP_OWNER); + } +} + +static void mps_set_sta_peer_pm(struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + enum nl80211_mesh_power_mode pm; + u8 *qc = ieee80211_get_qos_ctl(hdr); + + /* + * Test Power Management field of frame control (PW) and + * mesh power save level subfield of QoS control field (PSL) + * + * | PM | PSL| Mesh PM | + * +----+----+---------+ + * | 0 |Rsrv| Active | + * | 1 | 0 | Light | + * | 1 | 1 | Deep | + */ + if (ieee80211_has_pm(hdr->frame_control)) { + if (qc[1] & (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8)) + pm = NL80211_MESH_POWER_DEEP_SLEEP; + else + pm = NL80211_MESH_POWER_LIGHT_SLEEP; + } else { + pm = NL80211_MESH_POWER_ACTIVE; + } + + if (sta->peer_pm == pm) + return; + + mps_dbg(sta->sdata, "STA %pM enters mode %d\n", + sta->sta.addr, pm); + + sta->peer_pm = pm; + + ieee80211_mps_sta_status_update(sta); +} + +static void mps_set_sta_nonpeer_pm(struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + enum nl80211_mesh_power_mode pm; + + if (ieee80211_has_pm(hdr->frame_control)) + pm = NL80211_MESH_POWER_DEEP_SLEEP; + else + pm = NL80211_MESH_POWER_ACTIVE; + + if (sta->nonpeer_pm == pm) + return; + + mps_dbg(sta->sdata, "STA %pM sets non-peer mode to %d\n", + sta->sta.addr, pm); + + sta->nonpeer_pm = pm; + + ieee80211_mps_sta_status_update(sta); +} + +/** + * ieee80211_mps_rx_h_sta_process - frame receive handler for mesh powersave + * + * @sta: STA info that transmitted the frame + * @hdr: IEEE 802.11 (QoS) Header + */ +void ieee80211_mps_rx_h_sta_process(struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + if (is_unicast_ether_addr(hdr->addr1) && + ieee80211_is_data_qos(hdr->frame_control)) { + /* + * individually addressed QoS Data/Null frames contain + * peer link-specific PS mode towards the local STA + */ + mps_set_sta_peer_pm(sta, hdr); + + /* check for mesh Peer Service Period trigger frames */ + ieee80211_mpsp_trigger_process(ieee80211_get_qos_ctl(hdr), + sta, false, false); + } else { + /* + * can only determine non-peer PS mode + * (see IEEE802.11-2012 8.2.4.1.7) + */ + mps_set_sta_nonpeer_pm(sta, hdr); + } +} + + +/* mesh PS frame release */ + +static void mpsp_trigger_send(struct sta_info *sta, bool rspi, bool eosp) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct sk_buff *skb; + struct ieee80211_hdr *nullfunc; + struct ieee80211_tx_info *info; + u8 *qc; + + skb = mps_qos_null_get(sta); + if (!skb) + return; + + nullfunc = (struct ieee80211_hdr *) skb->data; + if (!eosp) + nullfunc->frame_control |= + cpu_to_le16(IEEE80211_FCTL_MOREDATA); + /* + * | RSPI | EOSP | MPSP triggering | + * +------+------+--------------------+ + * | 0 | 0 | local STA is owner | + * | 0 | 1 | no MPSP (MPSP end) | + * | 1 | 0 | both STA are owner | + * | 1 | 1 | peer STA is owner | see IEEE802.11-2012 13.14.9.2 + */ + qc = ieee80211_get_qos_ctl(nullfunc); + if (rspi) + qc[1] |= (IEEE80211_QOS_CTL_RSPI >> 8); + if (eosp) + qc[0] |= IEEE80211_QOS_CTL_EOSP; + + info = IEEE80211_SKB_CB(skb); + + info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | + IEEE80211_TX_CTL_REQ_TX_STATUS; + + mps_dbg(sdata, "sending MPSP trigger%s%s to %pM\n", + rspi ? " RSPI" : "", eosp ? " EOSP" : "", sta->sta.addr); + + ieee80211_tx_skb(sdata, skb); +} + +/** + * mpsp_qos_null_append - append QoS Null frame to MPSP skb queue if needed + * + * To properly end a mesh MPSP the last transmitted frame has to set the EOSP + * flag in the QoS Control field. In case the current tailing frame is not a + * QoS Data frame, append a QoS Null to carry the flag. + */ +static void mpsp_qos_null_append(struct sta_info *sta, + struct sk_buff_head *frames) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct sk_buff *new_skb, *skb = skb_peek_tail(frames); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_tx_info *info; + + if (ieee80211_is_data_qos(hdr->frame_control)) + return; + + new_skb = mps_qos_null_get(sta); + if (!new_skb) + return; + + mps_dbg(sdata, "appending QoS Null in MPSP towards %pM\n", + sta->sta.addr); + /* + * This frame has to be transmitted last. Assign lowest priority to + * make sure it cannot pass other frames when releasing multiple ACs. + */ + new_skb->priority = 1; + skb_set_queue_mapping(new_skb, IEEE80211_AC_BK); + ieee80211_set_qos_hdr(sdata, new_skb); + + info = IEEE80211_SKB_CB(new_skb); + info->control.vif = &sdata->vif; + info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; + + __skb_queue_tail(frames, new_skb); +} + +/** + * mps_frame_deliver - transmit frames during mesh powersave + * + * @sta: STA info to transmit to + * @n_frames: number of frames to transmit. -1 for all + */ +static void mps_frame_deliver(struct sta_info *sta, int n_frames) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + int ac; + struct sk_buff_head frames; + struct sk_buff *skb; + bool more_data = false; + + skb_queue_head_init(&frames); + + /* collect frame(s) from buffers */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + while (n_frames != 0) { + skb = skb_dequeue(&sta->tx_filtered[ac]); + if (!skb) { + skb = skb_dequeue( + &sta->ps_tx_buf[ac]); + if (skb) + local->total_ps_buffered--; + } + if (!skb) + break; + n_frames--; + __skb_queue_tail(&frames, skb); + } + + if (!skb_queue_empty(&sta->tx_filtered[ac]) || + !skb_queue_empty(&sta->ps_tx_buf[ac])) + more_data = true; + } + + /* nothing to send? -> EOSP */ + if (skb_queue_empty(&frames)) { + mpsp_trigger_send(sta, false, true); + return; + } + + /* in a MPSP make sure the last skb is a QoS Data frame */ + if (test_sta_flag(sta, WLAN_STA_MPSP_OWNER)) + mpsp_qos_null_append(sta, &frames); + + mps_dbg(sta->sdata, "sending %d frames to PS STA %pM\n", + skb_queue_len(&frames), sta->sta.addr); + + /* prepare collected frames for transmission */ + skb_queue_walk(&frames, skb) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (void *) skb->data; + + /* + * Tell TX path to send this frame even though the + * STA may still remain is PS mode after this frame + * exchange. + */ + info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; + + if (more_data || !skb_queue_is_last(&frames, skb)) + hdr->frame_control |= + cpu_to_le16(IEEE80211_FCTL_MOREDATA); + else + hdr->frame_control &= + cpu_to_le16(~IEEE80211_FCTL_MOREDATA); + + if (skb_queue_is_last(&frames, skb) && + ieee80211_is_data_qos(hdr->frame_control)) { + u8 *qoshdr = ieee80211_get_qos_ctl(hdr); + + /* MPSP trigger frame ends service period */ + *qoshdr |= IEEE80211_QOS_CTL_EOSP; + info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + } + } + + ieee80211_add_pending_skbs(local, &frames); + sta_info_recalc_tim(sta); +} + +/** + * ieee80211_mpsp_trigger_process - track status of mesh Peer Service Periods + * + * @qc: QoS Control field + * @sta: peer to start a MPSP with + * @tx: frame was transmitted by the local STA + * @acked: frame has been transmitted successfully + * + * NOTE: active mode STA may only serve as MPSP owner + */ +void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta, + bool tx, bool acked) +{ + u8 rspi = qc[1] & (IEEE80211_QOS_CTL_RSPI >> 8); + u8 eosp = qc[0] & IEEE80211_QOS_CTL_EOSP; + + if (tx) { + if (rspi && acked) + set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + + if (eosp) + clear_sta_flag(sta, WLAN_STA_MPSP_OWNER); + else if (acked && + test_sta_flag(sta, WLAN_STA_PS_STA) && + !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER)) + mps_frame_deliver(sta, -1); + } else { + if (eosp) + clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + else if (sta->local_pm != NL80211_MESH_POWER_ACTIVE) + set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + + if (rspi && !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER)) + mps_frame_deliver(sta, -1); + } +} + +/** + * ieee80211_mps_frame_release - release buffered frames in response to beacon + * + * @sta: mesh STA + * @elems: beacon IEs + * + * For peers if we have individually-addressed frames buffered or the peer + * indicates buffered frames, send a corresponding MPSP trigger frame. Since + * we do not evaluate the awake window duration, QoS Nulls are used as MPSP + * trigger frames. If the neighbour STA is not a peer, only send single frames. + */ +void ieee80211_mps_frame_release(struct sta_info *sta, + struct ieee802_11_elems *elems) +{ + int ac, buffer_local = 0; + bool has_buffered = false; + + /* TIM map only for LLID <= IEEE80211_MAX_AID */ + if (sta->plink_state == NL80211_PLINK_ESTAB) + has_buffered = ieee80211_check_tim(elems->tim, elems->tim_len, + le16_to_cpu(sta->llid) % IEEE80211_MAX_AID); + + if (has_buffered) + mps_dbg(sta->sdata, "%pM indicates buffered frames\n", + sta->sta.addr); + + /* only transmit to PS STA with announced, non-zero awake window */ + if (test_sta_flag(sta, WLAN_STA_PS_STA) && + (!elems->awake_window || !le16_to_cpu(*elems->awake_window))) + return; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + buffer_local += skb_queue_len(&sta->ps_tx_buf[ac]) + + skb_queue_len(&sta->tx_filtered[ac]); + + if (!has_buffered && !buffer_local) + return; + + if (sta->plink_state == NL80211_PLINK_ESTAB) + mpsp_trigger_send(sta, has_buffered, !buffer_local); + else + mps_frame_deliver(sta, 1); +} diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index a190895..c98be05 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1452,6 +1452,10 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) } } + /* mesh power save support */ + if (ieee80211_vif_is_mesh(&rx->sdata->vif)) + ieee80211_mps_rx_h_sta_process(sta, hdr); + /* * Drop (qos-)data::nullfunc frames silently, since they * are used only to control station power saving mode. @@ -2090,7 +2094,10 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (is_multicast_ether_addr(fwd_hdr->addr1)) { IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast); memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN); + /* update power mode indication when forwarding */ + ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr); } else if (!mesh_nexthop_lookup(fwd_skb, sdata)) { + /* mesh power mode flags updated in mesh_nexthop_lookup */ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast); } else { /* unable to resolve next hop */ diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 227233c..47a0f06 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -120,6 +120,8 @@ static void cleanup_single_sta(struct sta_info *sta) if (sta->sdata->vif.type == NL80211_IFTYPE_AP || sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) ps = &sdata->bss->ps; + else if (ieee80211_vif_is_mesh(&sdata->vif)) + ps = &sdata->u.mesh.ps; else return; @@ -587,6 +589,12 @@ void sta_info_recalc_tim(struct sta_info *sta) ps = &sta->sdata->bss->ps; id = sta->sta.aid; +#ifdef CONFIG_MAC80211_MESH + } else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) { + ps = &sta->sdata->u.mesh.ps; + /* TIM map only for PLID <= IEEE80211_MAX_AID */ + id = le16_to_cpu(sta->plid) % IEEE80211_MAX_AID; +#endif } else { return; } @@ -745,8 +753,9 @@ static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, bool have_buffered = false; int ac; - /* This is only necessary for stations on BSS interfaces */ - if (!sta->sdata->bss) + /* This is only necessary for stations on BSS/MBSS interfaces */ + if (!sta->sdata->bss && + !ieee80211_vif_is_mesh(&sta->sdata->vif)) return false; for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) @@ -934,6 +943,11 @@ void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, if (time_after(jiffies, sta->last_rx + exp_time)) { sta_dbg(sta->sdata, "expiring inactive STA %pM\n", sta->sta.addr); + + if (ieee80211_vif_is_mesh(&sdata->vif) && + test_sta_flag(sta, WLAN_STA_PS_STA)) + atomic_dec(&sdata->u.mesh.ps.num_sta_ps); + WARN_ON(__sta_info_destroy(sta)); } } @@ -992,6 +1006,8 @@ static void clear_sta_ps_flags(void *_sta) if (sdata->vif.type == NL80211_IFTYPE_AP || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) ps = &sdata->bss->ps; + else if (ieee80211_vif_is_mesh(&sdata->vif)) + ps = &sdata->u.mesh.ps; else return; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index af7d78a..5a1deba 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -56,6 +56,8 @@ * @WLAN_STA_INSERTED: This station is inserted into the hash table. * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station. * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid. + * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period. + * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH, @@ -78,6 +80,8 @@ enum ieee80211_sta_info_flags { WLAN_STA_INSERTED, WLAN_STA_RATE_CONTROL, WLAN_STA_TOFFSET_KNOWN, + WLAN_STA_MPSP_OWNER, + WLAN_STA_MPSP_RECIPIENT, }; #define ADDBA_RESP_INTERVAL HZ @@ -282,6 +286,9 @@ struct sta_ampdu_mlme { * @t_offset_setpoint: reference timing offset of this sta to be used when * calculating clockdrift * @ch_width: peer's channel width + * @local_pm: local link-specific power save mode + * @peer_pm: peer-specific power save mode towards local STA + * @nonpeer_pm: STA power save mode towards non-peer neighbors * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver @@ -379,6 +386,10 @@ struct sta_info { s64 t_offset; s64 t_offset_setpoint; enum nl80211_chan_width ch_width; + /* mesh power save */ + enum nl80211_mesh_power_mode local_pm; + enum nl80211_mesh_power_mode peer_pm; + enum nl80211_mesh_power_mode nonpeer_pm; #endif #ifdef CONFIG_MAC80211_DEBUGFS diff --git a/net/mac80211/status.c b/net/mac80211/status.c index d041de0..4343920 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -472,6 +472,13 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) return; } + /* mesh Peer Service Period support */ + if (ieee80211_vif_is_mesh(&sta->sdata->vif) && + ieee80211_is_data_qos(fc)) + ieee80211_mpsp_trigger_process( + ieee80211_get_qos_ctl(hdr), + sta, true, acked); + if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) && (rates_idx != -1)) sta->last_tx_rate = info->status.rates[rates_idx]; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7892b0a..2ef0e19b 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -329,6 +329,8 @@ static void purge_old_ps_buffers(struct ieee80211_local *local) if (sdata->vif.type == NL80211_IFTYPE_AP) ps = &sdata->u.ap.ps; + else if (ieee80211_vif_is_mesh(&sdata->vif)) + ps = &sdata->u.mesh.ps; else continue; @@ -372,18 +374,20 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) /* * broadcast/multicast frame * - * If any of the associated stations is in power save mode, + * If any of the associated/peer stations is in power save mode, * the frame is buffered to be sent after DTIM beacon frame. * This is done either by the hardware or us. */ - /* powersaving STAs currently only in AP/VLAN mode */ + /* powersaving STAs currently only in AP/VLAN/mesh mode */ if (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { if (!tx->sdata->bss) return TX_CONTINUE; ps = &tx->sdata->bss->ps; + } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { + ps = &tx->sdata->u.mesh.ps; } else { return TX_CONTINUE; } @@ -1473,12 +1477,14 @@ void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, hdr = (struct ieee80211_hdr *) skb->data; info->control.vif = &sdata->vif; - if (ieee80211_vif_is_mesh(&sdata->vif) && - ieee80211_is_data(hdr->frame_control) && - !is_multicast_ether_addr(hdr->addr1) && - mesh_nexthop_resolve(skb, sdata)) { - /* skb queued: don't free */ - return; + if (ieee80211_vif_is_mesh(&sdata->vif)) { + if (ieee80211_is_data(hdr->frame_control) && + is_unicast_ether_addr(hdr->addr1)) { + if (mesh_nexthop_resolve(skb, sdata)) + return; /* skb queued: don't free */ + } else { + ieee80211_mps_set_frame_flags(sdata, NULL, hdr); + } } ieee80211_set_qos_hdr(sdata, skb); @@ -2445,12 +2451,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, 2 + /* NULL SSID */ 2 + 8 + /* supported rates */ 2 + 3 + /* DS params */ + 256 + /* TIM IE */ 2 + (IEEE80211_MAX_SUPP_RATES - 8) + 2 + sizeof(struct ieee80211_ht_cap) + 2 + sizeof(struct ieee80211_ht_operation) + 2 + sdata->u.mesh.mesh_id_len + 2 + sizeof(struct ieee80211_meshconf_ie) + - sdata->u.mesh.ie_len); + sdata->u.mesh.ie_len + + 2 + sizeof(__le16)); /* awake window */ if (!skb) goto out; @@ -2462,6 +2470,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, eth_broadcast_addr(mgmt->da); memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); mgmt->u.beacon.beacon_int = cpu_to_le16(sdata->vif.bss_conf.beacon_int); mgmt->u.beacon.capab_info |= cpu_to_le16( @@ -2475,12 +2484,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, if (ieee80211_add_srates_ie(sdata, skb, true, band) || mesh_add_ds_params_ie(skb, sdata) || + ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) || ieee80211_add_ext_srates_ie(sdata, skb, true, band) || mesh_add_rsn_ie(skb, sdata) || mesh_add_ht_cap_ie(skb, sdata) || mesh_add_ht_oper_ie(skb, sdata) || mesh_add_meshid_ie(skb, sdata) || mesh_add_meshconf_ie(skb, sdata) || + mesh_add_awake_window_ie(skb, sdata) || mesh_add_vendor_ies(skb, sdata)) { pr_err("o11s: couldn't add ies!\n"); goto out; @@ -2734,6 +2745,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, goto out; ps = &sdata->u.ap.ps; + } else if (ieee80211_vif_is_mesh(&sdata->vif)) { + ps = &sdata->u.mesh.ps; } else { goto out; } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 139ad9b..6cb71a3 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -805,6 +805,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->peering = pos; elems->peering_len = elen; break; + case WLAN_EID_MESH_AWAKE_WINDOW: + if (elen >= 2) + elems->awake_window = (void *)pos; + break; case WLAN_EID_PREQ: elems->preq = pos; elems->preq_len = elen; diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 906f00c..afba19c 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -191,6 +191,15 @@ void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata, /* qos header is 2 bytes */ *p++ = ack_policy | tid; - *p = ieee80211_vif_is_mesh(&sdata->vif) ? - (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8) : 0; + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* preserve RSPI and Mesh PS Level bit */ + *p &= ((IEEE80211_QOS_CTL_RSPI | + IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8); + + /* Nulls don't have a mesh header (frame body) */ + if (!ieee80211_is_qos_nullfunc(hdr->frame_control)) + *p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8); + } else { + *p = 0; + } } -- cgit v0.10.2 From c5c351088ae76b46ae08dec1bb7f621e0721c78b Mon Sep 17 00:00:00 2001 From: Gao feng Date: Thu, 31 Jan 2013 16:30:57 +0000 Subject: netns: fdb: allow unprivileged users to add/del fdb entries Right now,only ixgdb,macvlan,vxlan and bridge implement fdb_add/fdb_del operations. these operations only operate the private data of net device. So allowing the unprivileged users who creates the userns and netns to add/del fdb entries will do no harm to other netns. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 9a419b0..c1e4db6 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2058,9 +2058,6 @@ static int rtnl_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) u8 *addr; int err; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - err = nlmsg_parse(nlh, sizeof(*ndm), tb, NDA_MAX, NULL); if (err < 0) return err; @@ -2127,9 +2124,6 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) int err = -EINVAL; __u8 *addr; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (nlmsg_len(nlh) < sizeof(*ndm)) return -EINVAL; -- cgit v0.10.2 From bb12b8b26e197b21e3f28d5401bfee6f86a8d633 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Thu, 31 Jan 2013 16:30:58 +0000 Subject: netns: ebtable: allow unprivileged users to operate ebtables ebt_table is a private resource of netns, operating ebtables in one netns will not affect other netns, we can allow the creator user of userns and netns to change the ebtables. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 5fe2ff3..8d493c9 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1472,16 +1472,17 @@ static int do_ebt_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len) { int ret; + struct net *net = sock_net(sk); - if (!capable(CAP_NET_ADMIN)) + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; switch(cmd) { case EBT_SO_SET_ENTRIES: - ret = do_replace(sock_net(sk), user, len); + ret = do_replace(net, user, len); break; case EBT_SO_SET_COUNTERS: - ret = update_counters(sock_net(sk), user, len); + ret = update_counters(net, user, len); break; default: ret = -EINVAL; @@ -1494,14 +1495,15 @@ static int do_ebt_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) int ret; struct ebt_replace tmp; struct ebt_table *t; + struct net *net = sock_net(sk); - if (!capable(CAP_NET_ADMIN)) + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; if (copy_from_user(&tmp, user, sizeof(tmp))) return -EFAULT; - t = find_table_lock(sock_net(sk), tmp.name, &ret, &ebt_mutex); + t = find_table_lock(net, tmp.name, &ret, &ebt_mutex); if (!t) return ret; @@ -2279,16 +2281,17 @@ static int compat_do_ebt_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len) { int ret; + struct net *net = sock_net(sk); - if (!capable(CAP_NET_ADMIN)) + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; switch (cmd) { case EBT_SO_SET_ENTRIES: - ret = compat_do_replace(sock_net(sk), user, len); + ret = compat_do_replace(net, user, len); break; case EBT_SO_SET_COUNTERS: - ret = compat_update_counters(sock_net(sk), user, len); + ret = compat_update_counters(net, user, len); break; default: ret = -EINVAL; @@ -2302,8 +2305,9 @@ static int compat_do_ebt_get_ctl(struct sock *sk, int cmd, int ret; struct compat_ebt_replace tmp; struct ebt_table *t; + struct net *net = sock_net(sk); - if (!capable(CAP_NET_ADMIN)) + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; /* try real handler in case userland supplied needed padding */ @@ -2314,7 +2318,7 @@ static int compat_do_ebt_get_ctl(struct sock *sk, int cmd, if (copy_from_user(&tmp, user, sizeof(tmp))) return -EFAULT; - t = find_table_lock(sock_net(sk), tmp.name, &ret, &ebt_mutex); + t = find_table_lock(net, tmp.name, &ret, &ebt_mutex); if (!t) return ret; -- cgit v0.10.2 From e4d343ea92bdce831f071d9706b2daf097e6d009 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Thu, 31 Jan 2013 16:30:59 +0000 Subject: netns: bridge: allow unprivileged users add/delete mdb entry since the mdb table is belong to bridge device,and the bridge device can only be seen in one netns. So it's safe to allow unprivileged user which is the creator of userns and netns to modify the mdb table. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c index acc9f4c..38991e0 100644 --- a/net/bridge/br_mdb.c +++ b/net/bridge/br_mdb.c @@ -272,9 +272,6 @@ static int br_mdb_parse(struct sk_buff *skb, struct nlmsghdr *nlh, struct net_device *dev; int err; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - err = nlmsg_parse(nlh, sizeof(*bpm), tb, MDBA_SET_ENTRY, NULL); if (err < 0) return err; -- cgit v0.10.2 From 387ff91184fc03e4b8c5818e8ef2928434bcee6d Mon Sep 17 00:00:00 2001 From: Gao feng Date: Thu, 31 Jan 2013 16:31:00 +0000 Subject: netns: bond: allow unprivileged users to control bond device reduce the permission check of bond device's ioctl. allow the userns root to control the bond device. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b38c9bf..2239937 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3612,6 +3612,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd struct ifslave k_sinfo; struct ifslave __user *u_sinfo = NULL; struct mii_ioctl_data *mii = NULL; + struct net *net; int res = 0; pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd); @@ -3678,10 +3679,12 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd break; } - if (!capable(CAP_NET_ADMIN)) + net = dev_net(bond_dev); + + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; - slave_dev = dev_get_by_name(dev_net(bond_dev), ifr->ifr_slave); + slave_dev = dev_get_by_name(net, ifr->ifr_slave); pr_debug("slave_dev=%p:\n", slave_dev); -- cgit v0.10.2 From 72073ad2adacd2ed58a1dd98995342ca409a156e Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Fri, 1 Feb 2013 00:03:47 +0000 Subject: cxgb3: Update VLAN extraction stats in the GRO path Signed-off-by: Divy Le Ray Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index 9096dc0..9d67eb7 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -2130,8 +2130,10 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); - if (cpl->vlan_valid) + if (cpl->vlan_valid) { + qs->port_stats[SGE_PSTAT_VLANEX]++; __vlan_hwaccel_put_tag(skb, ntohs(cpl->vlan)); + } napi_gro_frags(&qs->napi); } -- cgit v0.10.2 From 8c98653f05534acd1cb07ea4929702a3659177d1 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 1 Feb 2013 04:37:43 +0000 Subject: sctp: sctp_close: fix release of bindings for deferred call_rcu's It seems due to RCU usage, i.e. within SCTP's address binding list, a, say, ``behavioral change'' was introduced which does actually not conform to the RFC anymore. In particular consider the following (fictional) scenario to demonstrate this: do: Two SOCK_SEQPACKET-style sockets are opened (S1, S2) S1 is bound to 127.0.0.1, port 1024 [server] S2 is bound to 127.0.0.1, port 1025 [client] listen(2) is invoked on S1 From S2 we call one sendmsg(2) with msg.msg_name and msg.msg_namelen parameters set to the server's address S1, S2 are closed goto do The first pass of this loop passes successful, while the second round fails during binding of S1 (address still in use). What is happening? In the first round, the initial handshake is being done, and, at the time close(2) is called on S1, a non-graceful shutdown is performed via ABORT since in S1's receive queue an unprocessed packet is present, thus stating an error condition. This can be considered as a correct behavior. During close also all bound addresses are freed, thus nothing *must* be active anymore. In reference to RFC2960: After checking the Verification Tag, the receiving endpoint shall remove the association from its record, and shall report the termination to its upper layer. (9.1 Abort of an Association) Also, no half-open states are supported, thus after an ungraceful shutdown, we leave nothing behind. However, this seems not to be happening though. In a real-world scenario, this is exactly where it breaks the lksctp-tools functional test suite, *for instance*: ./test_sockopt test_sockopt.c 1 PASS : getsockopt(SCTP_STATUS) on a socket with no assoc test_sockopt.c 2 PASS : getsockopt(SCTP_STATUS) test_sockopt.c 3 PASS : getsockopt(SCTP_STATUS) with invalid associd test_sockopt.c 4 PASS : getsockopt(SCTP_STATUS) with NULL associd test_sockopt.c 5 BROK : bind: Address already in use The underlying problem is that sctp_endpoint_destroy() hasn't been triggered yet while the next bind attempt is being done. It will be triggered eventually (but too late) by sctp_transport_destroy_rcu() after one RCU grace period: sctp_transport_destroy() sctp_transport_destroy_rcu() ----. sctp_association_put() [*] <--+--> sctp_packet_free() sctp_association_destroy() [...] sctp_endpoint_put() skb->destructor sctp_endpoint_destroy() sctp_wfree() sctp_bind_addr_free() sctp_association_put() [*] Thus, we move out the condition with sctp_association_put() as well as the sctp_packet_free() invocation and the issue can be solved. We also better free the SCTP chunks first before putting the ref of the association. With this patch, the example above (which simulates a similar scenario as in the implementation of this test case) and therefore also the test suite run successfully through. Tested by myself. Cc: Vlad Yasevich Signed-off-by: Daniel Borkmann Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 4e45bb6..ca5331c 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -168,10 +168,6 @@ static void sctp_transport_destroy_rcu(struct rcu_head *head) struct sctp_transport *transport; transport = container_of(head, struct sctp_transport, rcu); - if (transport->asoc) - sctp_association_put(transport->asoc); - - sctp_packet_free(&transport->packet); dst_release(transport->dst); kfree(transport); @@ -186,6 +182,11 @@ static void sctp_transport_destroy(struct sctp_transport *transport) SCTP_ASSERT(transport->dead, "Transport is not dead", return); call_rcu(&transport->rcu, sctp_transport_destroy_rcu); + + sctp_packet_free(&transport->packet); + + if (transport->asoc) + sctp_association_put(transport->asoc); } /* Start T3_rtx timer if it is not already running and update the heartbeat -- cgit v0.10.2 From ad4437d4edeabe6a8d34f8cb3865be005ded6a1e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:08 +0000 Subject: caif: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c index bc497d7..bce8bac 100644 --- a/drivers/net/caif/caif_shmcore.c +++ b/drivers/net/caif/caif_shmcore.c @@ -633,9 +633,6 @@ int caif_shmcore_probe(struct shmdev_layer *pshm_dev) kmalloc(sizeof(struct buf_list), GFP_KERNEL); if (tx_buf == NULL) { - pr_warn("ERROR, Could not" - " allocate dynamic mem. for tx_buf," - " Bailing out ...\n"); free_netdev(pshm_dev->pshm_netdev); return -ENOMEM; } @@ -662,9 +659,6 @@ int caif_shmcore_probe(struct shmdev_layer *pshm_dev) kmalloc(sizeof(struct buf_list), GFP_KERNEL); if (rx_buf == NULL) { - pr_warn("ERROR, Could not" - " allocate dynamic mem.for rx_buf," - " Bailing out ...\n"); free_netdev(pshm_dev->pshm_netdev); return -ENOMEM; } -- cgit v0.10.2 From 09da6c5f60ad2e2018366e47192a9ddbccfb3ac5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:09 +0000 Subject: can: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c index 036a326..36d298d 100644 --- a/drivers/net/can/sja1000/ems_pci.c +++ b/drivers/net/can/sja1000/ems_pci.c @@ -238,7 +238,6 @@ static int ems_pci_add_card(struct pci_dev *pdev, /* Allocating card structures to hold addresses, ... */ card = kzalloc(sizeof(struct ems_pci_card), GFP_KERNEL); if (card == NULL) { - dev_err(&pdev->dev, "Unable to allocate memory\n"); pci_disable_device(pdev); return -ENOMEM; } diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index d84888f..44406a4 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -451,11 +451,8 @@ static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) } else { /* create the bit banging I2C adapter structure */ card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL); - if (!card) { - dev_err(&pdev->dev, - "failed allocating memory for i2c chip\n"); + if (!card) return -ENOMEM; - } card->cfg_base = chan->cfg_base; card->reg_base = priv->reg_base; diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c index f117514..1a7020b 100644 --- a/drivers/net/can/sja1000/peak_pcmcia.c +++ b/drivers/net/can/sja1000/peak_pcmcia.c @@ -660,7 +660,6 @@ static int pcan_probe(struct pcmcia_device *pdev) card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL); if (!card) { - dev_err(&pdev->dev, "couldn't allocate card memory\n"); err = -ENOMEM; goto probe_err_2; } diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 11d1062..a042cdc 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -508,7 +508,6 @@ static int plx_pci_add_card(struct pci_dev *pdev, /* Allocate card structures to hold addresses, ... */ card = kzalloc(sizeof(*card), GFP_KERNEL); if (!card) { - dev_err(&pdev->dev, "Unable to allocate memory\n"); pci_disable_device(pdev); return -ENOMEM; } diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index c69f0b7..0e7bde7 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -1014,10 +1014,8 @@ static int ems_usb_probe(struct usb_interface *intf, } dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL); - if (!dev->intr_in_buffer) { - dev_err(&intf->dev, "Couldn't alloc Intr buffer\n"); + if (!dev->intr_in_buffer) goto cleanup_intr_urb; - } dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE + sizeof(struct ems_cpc_msg), GFP_KERNEL); diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 5b58a4d..45cb9f3 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -561,7 +561,6 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv, buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); usb_free_urb(urb); return -ENOMEM; } @@ -1268,7 +1267,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); stats->tx_dropped++; goto nobufmem; } diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index d9290ea..a0f647f 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -386,7 +386,6 @@ static int peak_usb_start(struct peak_usb_device *dev) buf = kmalloc(dev->adapter->rx_buffer_size, GFP_KERNEL); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); usb_free_urb(urb); err = -ENOMEM; break; @@ -442,7 +441,6 @@ static int peak_usb_start(struct peak_usb_device *dev) buf = kmalloc(dev->adapter->tx_buffer_size, GFP_KERNEL); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); usb_free_urb(urb); err = -ENOMEM; break; @@ -634,7 +632,6 @@ static int peak_usb_restart(struct peak_usb_device *dev) /* also allocate enough space for the commands to send */ buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_ATOMIC); if (!buf) { - netdev_err(dev->netdev, "no memory left for async cmd\n"); usb_free_urb(urb); return -ENOMEM; } @@ -729,8 +726,6 @@ static int peak_usb_create_dev(struct peak_usb_adapter *peak_usb_adapter, /* allocate a buffer large enough to send commands */ dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL); if (!dev->cmd_buf) { - dev_err(&intf->dev, "%s: couldn't alloc cmd buffer\n", - PCAN_USB_DRIVER_NAME); err = -ENOMEM; goto lbl_set_intf_data; } diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index f789e6f..6e15ef0 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -958,10 +958,8 @@ static int usb_8dev_probe(struct usb_interface *intf, priv->cmd_msg_buffer = kzalloc(sizeof(struct usb_8dev_cmd_msg), GFP_KERNEL); - if (!priv->cmd_msg_buffer) { - netdev_err(netdev, "Couldn't alloc Tx buffer\n"); + if (!priv->cmd_msg_buffer) goto cleanup_candev; - } usb_set_intfdata(intf, priv); -- cgit v0.10.2 From b2adaca92c63b9bb8beb021d554f656e387a7648 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:43:58 +0000 Subject: ethernet: Remove unnecessary alloc/OOM messages, alloc cleanups alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 8df02ba..571b514 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -982,11 +982,9 @@ static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter) size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 + rfd_ring->count); tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); - if (unlikely(!tpd_ring->buffer_info)) { - dev_err(&pdev->dev, "kzalloc failed, size = %d\n", - size); + if (unlikely(!tpd_ring->buffer_info)) goto err_nomem; - } + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { tpd_ring[i].buffer_info = (tpd_ring->buffer_info + count); diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index cf79d93..92f4734 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -819,8 +819,6 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter) size = sizeof(struct atl1e_tx_buffer) * (tx_ring->count); tx_ring->tx_buffer = kzalloc(size, GFP_KERNEL); if (tx_ring->tx_buffer == NULL) { - netdev_err(adapter->netdev, "kzalloc failed, size = D%d\n", - size); err = -ENOMEM; goto failed; } diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 3ba6be6..c030274 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -1518,10 +1518,8 @@ static void b44_setup_pseudo_magicp(struct b44 *bp) u8 pwol_mask[B44_PMASK_SIZE]; pwol_pattern = kzalloc(B44_PATTERN_SIZE, GFP_KERNEL); - if (!pwol_pattern) { - pr_err("Memory not available for WOL\n"); + if (!pwol_pattern) return; - } /* Ipv4 magic packet pattern - pattern 0.*/ memset(pwol_mask, 0, B44_PMASK_SIZE); diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index f5b6b47..7d81e05 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -886,10 +886,9 @@ static int bcm_enet_open(struct net_device *dev) priv->tx_desc_alloc_size = size; priv->tx_desc_cpu = p; - priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size, + priv->tx_skb = kcalloc(priv->tx_ring_size, sizeof(struct sk_buff *), GFP_KERNEL); if (!priv->tx_skb) { - dev_err(kdev, "cannot allocate rx skb queue\n"); ret = -ENOMEM; goto out_free_tx_ring; } @@ -900,10 +899,9 @@ static int bcm_enet_open(struct net_device *dev) spin_lock_init(&priv->tx_lock); /* init & fill rx ring with skbs */ - priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size, + priv->rx_skb = kcalloc(priv->rx_ring_size, sizeof(struct sk_buff *), GFP_KERNEL); if (!priv->rx_skb) { - dev_err(kdev, "cannot allocate rx skb queue\n"); ret = -ENOMEM; goto out_free_tx_skb; } diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index 1c4dadc..149a3a0 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -5425,11 +5425,9 @@ static struct cnic_dev *cnic_alloc_dev(struct net_device *dev, alloc_size = sizeof(struct cnic_dev) + sizeof(struct cnic_local); - cdev = kzalloc(alloc_size , GFP_KERNEL); - if (cdev == NULL) { - netdev_err(dev, "allocate dev struct failure\n"); + cdev = kzalloc(alloc_size, GFP_KERNEL); + if (cdev == NULL) return NULL; - } cdev->netdev = dev; cdev->cnic_priv = (char *)cdev + sizeof(struct cnic_dev); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index ab07026..90195e3 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -5793,10 +5793,8 @@ static void tg3_dump_state(struct tg3 *tp) u32 *regs; regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC); - if (!regs) { - netdev_err(tp->dev, "Failed allocating register dump buffer\n"); + if (!regs) return; - } if (tg3_flag(tp, PCI_EXPRESS)) { /* Read up to but not including private PCI registers */ diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index d0fe53c..45e59d5 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -716,12 +716,11 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, int j = MAX_FILER_IDX, l = 0x0; int ret = 1; - local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), - GFP_KERNEL); - local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), - GFP_KERNEL); + local_rqfpr = kmalloc_array(MAX_FILER_IDX + 1, sizeof(unsigned int), + GFP_KERNEL); + local_rqfcr = kmalloc_array(MAX_FILER_IDX + 1, sizeof(unsigned int), + GFP_KERNEL); if (!local_rqfpr || !local_rqfcr) { - pr_err("Out of memory\n"); ret = 0; goto err; } diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 19b64de..91977d9 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -1921,10 +1921,8 @@ static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr) u64 hret; ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_ATOMIC); - if (!ehea_mcl_entry) { - pr_err("no mem for mcl_entry\n"); + if (!ehea_mcl_entry) return; - } INIT_LIST_HEAD(&ehea_mcl_entry->list); diff --git a/drivers/net/ethernet/ibm/ehea/ehea_qmr.c b/drivers/net/ethernet/ibm/ehea/ehea_qmr.c index 27f8817..9b03033 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_qmr.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_qmr.c @@ -64,11 +64,10 @@ static int hw_queue_ctor(struct hw_queue *queue, const u32 nr_of_pages, } queue->queue_length = nr_of_pages * pagesize; - queue->queue_pages = kmalloc(nr_of_pages * sizeof(void *), GFP_KERNEL); - if (!queue->queue_pages) { - pr_err("no mem for queue_pages\n"); + queue->queue_pages = kmalloc_array(nr_of_pages, sizeof(void *), + GFP_KERNEL); + if (!queue->queue_pages) return -ENOMEM; - } /* * allocate pages for queue: @@ -129,10 +128,8 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter, void *vpage; cq = kzalloc(sizeof(*cq), GFP_KERNEL); - if (!cq) { - pr_err("no mem for cq\n"); + if (!cq) goto out_nomem; - } cq->attr.max_nr_of_cqes = nr_of_cqe; cq->attr.cq_token = cq_token; @@ -257,10 +254,8 @@ struct ehea_eq *ehea_create_eq(struct ehea_adapter *adapter, struct ehea_eq *eq; eq = kzalloc(sizeof(*eq), GFP_KERNEL); - if (!eq) { - pr_err("no mem for eq\n"); + if (!eq) return NULL; - } eq->adapter = adapter; eq->attr.type = type; @@ -428,10 +423,8 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter, qp = kzalloc(sizeof(*qp), GFP_KERNEL); - if (!qp) { - pr_err("no mem for qp\n"); + if (!qp) return NULL; - } qp->adapter = adapter; diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c index 50ea12b..1f7ecf5 100644 --- a/drivers/net/ethernet/ibm/emac/mal.c +++ b/drivers/net/ethernet/ibm/emac/mal.c @@ -528,12 +528,9 @@ static int mal_probe(struct platform_device *ofdev) irq_handler_t hdlr_serr, hdlr_txde, hdlr_rxde; mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL); - if (!mal) { - printk(KERN_ERR - "mal%d: out of memory allocating MAL structure!\n", - index); + if (!mal) return -ENOMEM; - } + mal->index = index; mal->ofdev = ofdev; mal->version = of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal2") ? 2 : 1; diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 4181f6e..c859771 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -637,7 +637,6 @@ static int ibmveth_open(struct net_device *netdev) adapter->bounce_buffer = kmalloc(netdev->mtu + IBMVETH_BUFF_OH, GFP_KERNEL); if (!adapter->bounce_buffer) { - netdev_err(netdev, "unable to allocate bounce buffer\n"); rc = -ENOMEM; goto err_out_free_irq; } diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a59e630..1aaf193 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2671,9 +2671,8 @@ static int igb_sw_init(struct igb_adapter *adapter) igb_init_queue_configuration(adapter); /* Setup and initialize a copy of the hw vlan table array */ - adapter->shadow_vfta = kzalloc(sizeof(u32) * - E1000_VLAN_FILTER_TBL_SIZE, - GFP_ATOMIC); + adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32), + GFP_ATOMIC); /* This call may decrease the number of queues */ if (igb_init_interrupt_scheme(adapter, true)) { diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 8224889..f53f713 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1399,12 +1399,10 @@ static void igbvf_set_multi(struct net_device *netdev) int i; if (!netdev_mc_empty(netdev)) { - mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); - if (!mta_list) { - dev_err(&adapter->pdev->dev, - "failed to allocate multicast filter list\n"); + mta_list = kmalloc_array(netdev_mc_count(netdev), ETH_ALEN, + GFP_ATOMIC); + if (!mta_list) return; - } } /* prepare a packed array of only addresses. */ diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index c27b23d8..2914050 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1879,12 +1879,10 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index) memset(rxq->rx_desc_area, 0, size); rxq->rx_desc_area_size = size; - rxq->rx_skb = kmalloc(rxq->rx_ring_size * sizeof(*rxq->rx_skb), - GFP_KERNEL); - if (rxq->rx_skb == NULL) { - netdev_err(mp->dev, "can't allocate rx skb ring\n"); + rxq->rx_skb = kmalloc_array(rxq->rx_ring_size, sizeof(*rxq->rx_skb), + GFP_KERNEL); + if (rxq->rx_skb == NULL) goto out_free; - } rx_desc = rxq->rx_desc_area; for (i = 0; i < rxq->rx_ring_size; i++) { diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index 74f1c15..77b7c80 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -164,7 +164,6 @@ static int orion_mdio_probe(struct platform_device *pdev) bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); if (!bus->irq) { - dev_err(&pdev->dev, "Cannot allocate PHY IRQ array\n"); mdiobus_free(bus); return -ENOMEM; } diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 8b08bc4..171f4b3 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3916,10 +3916,9 @@ static int skge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* space for skge@pci:0000:04:00.0 */ hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") + strlen(pci_name(pdev)) + 1, GFP_KERNEL); - if (!hw) { - dev_err(&pdev->dev, "cannot allocate hardware struct\n"); + if (!hw) goto err_out_free_regions; - } + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->pdev = pdev; diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 366a12a..fc07ca3 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4969,10 +4969,8 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") + strlen(pci_name(pdev)) + 1, GFP_KERNEL); - if (!hw) { - dev_err(&pdev->dev, "cannot allocate hardware struct\n"); + if (!hw) goto err_out_free_regions; - } hw->pdev = pdev; sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index 3a2b8c6..f3c7961 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -191,10 +191,8 @@ static void *mlx4_en_add(struct mlx4_dev *dev) printk_once(KERN_INFO "%s", mlx4_en_version); - mdev = kzalloc(sizeof *mdev, GFP_KERNEL); + mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); if (!mdev) { - dev_err(&dev->pdev->dev, "Device struct alloc failed, " - "aborting.\n"); err = -ENOMEM; goto err_free_res; } diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e38c6b2..12ddae6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2054,10 +2054,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data) /* Allow large DMA segments, up to the firmware limit of 1 GB */ dma_set_max_seg_size(&pdev->dev, 1024 * 1024 * 1024); - priv = kzalloc(sizeof *priv, GFP_KERNEL); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { - dev_err(&pdev->dev, "Device struct alloc failed, " - "aborting.\n"); err = -ENOMEM; goto err_release_regions; } diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index f8408d6..4f9937e 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -664,10 +664,9 @@ static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp) /* copy header of running firmware from SRAM to host memory to * validate firmware */ hdr = kmalloc(bytes, GFP_KERNEL); - if (hdr == NULL) { - dev_err(dev, "could not malloc firmware hdr\n"); + if (hdr == NULL) return -ENOMEM; - } + memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes); status = myri10ge_validate_firmware(mgp, hdr); kfree(hdr); diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c index 7f556a8..1bcaf45 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c @@ -201,11 +201,8 @@ netxen_setup_minidump(struct netxen_adapter *adapter) adapter->mdump.md_template = kmalloc(adapter->mdump.md_template_size, GFP_KERNEL); - if (!adapter->mdump.md_template) { - dev_err(&adapter->pdev->dev, "Unable to allocate memory " - "for minidump template.\n"); + if (!adapter->mdump.md_template) return -ENOMEM; - } err = netxen_get_minidump_template(adapter); if (err) { diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c index 946160f..9fbb1cd 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c @@ -670,11 +670,9 @@ static int nx_p3_nic_add_mac(struct netxen_adapter *adapter, } cur = kzalloc(sizeof(nx_mac_list_t), GFP_ATOMIC); - if (cur == NULL) { - printk(KERN_ERR "%s: failed to add mac address filter\n", - adapter->netdev->name); + if (cur == NULL) return -ENOMEM; - } + memcpy(cur->mac_addr, addr, ETH_ALEN); list_add_tail(&cur->list, &adapter->mac_list); return nx_p3_sre_macaddr_change(adapter, @@ -2568,16 +2566,10 @@ netxen_dump_fw(struct netxen_adapter *adapter) adapter->mdump.md_capture_size; if (!adapter->mdump.md_capture_buff) { adapter->mdump.md_capture_buff = - vmalloc(adapter->mdump.md_dump_size); - if (!adapter->mdump.md_capture_buff) { - dev_info(&adapter->pdev->dev, - "Unable to allocate memory for minidump " - "capture_buffer(%d bytes).\n", - adapter->mdump.md_dump_size); + vzalloc(adapter->mdump.md_dump_size); + if (!adapter->mdump.md_capture_buff) return; - } - memset(adapter->mdump.md_capture_buff, 0, - adapter->mdump.md_dump_size); + if (netxen_collect_minidump(adapter)) { adapter->mdump.has_valid_dump = 0; adapter->mdump.md_dump_size = 0; diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index 695667d..db50598 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -197,41 +197,34 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter) struct nx_host_sds_ring *sds_ring; struct nx_host_tx_ring *tx_ring; struct netxen_rx_buffer *rx_buf; - int ring, i, size; + int ring, i; struct netxen_cmd_buffer *cmd_buf_arr; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; - size = sizeof(struct nx_host_tx_ring); - tx_ring = kzalloc(size, GFP_KERNEL); - if (tx_ring == NULL) { - dev_err(&pdev->dev, "%s: failed to allocate tx ring struct\n", - netdev->name); + tx_ring = kzalloc(sizeof(struct nx_host_tx_ring), GFP_KERNEL); + if (tx_ring == NULL) return -ENOMEM; - } + adapter->tx_ring = tx_ring; tx_ring->num_desc = adapter->num_txd; tx_ring->txq = netdev_get_tx_queue(netdev, 0); cmd_buf_arr = vzalloc(TX_BUFF_RINGSIZE(tx_ring)); - if (cmd_buf_arr == NULL) { - dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n", - netdev->name); + if (cmd_buf_arr == NULL) goto err_out; - } + tx_ring->cmd_buf_arr = cmd_buf_arr; recv_ctx = &adapter->recv_ctx; - size = adapter->max_rds_rings * sizeof (struct nx_host_rds_ring); - rds_ring = kzalloc(size, GFP_KERNEL); - if (rds_ring == NULL) { - dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n", - netdev->name); + rds_ring = kcalloc(adapter->max_rds_rings, + sizeof(struct nx_host_rds_ring), GFP_KERNEL); + if (rds_ring == NULL) goto err_out; - } + recv_ctx->rds_rings = rds_ring; for (ring = 0; ring < adapter->max_rds_rings; ring++) { diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 7a849fc..501f492 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -3176,11 +3176,8 @@ netxen_list_config_vlan_ip(struct netxen_adapter *adapter, } cur = kzalloc(sizeof(struct nx_vlan_ip_list), GFP_ATOMIC); - if (cur == NULL) { - printk(KERN_ERR "%s: failed to add vlan ip to list\n", - adapter->netdev->name); + if (cur == NULL) return; - } cur->ip_addr = ifa->ifa_address; list_add_tail(&cur->list, &adapter->vlan_ip_list); diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index c0ed12d..8fd38cb6 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -2591,13 +2591,11 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev) else qdev->lrg_buf_q_alloc_size = qdev->lrg_buf_q_size * 2; - qdev->lrg_buf = - kmalloc(qdev->num_large_buffers * sizeof(struct ql_rcv_buf_cb), - GFP_KERNEL); - if (qdev->lrg_buf == NULL) { - netdev_err(qdev->ndev, "qdev->lrg_buf alloc failed\n"); + qdev->lrg_buf = kmalloc_array(qdev->num_large_buffers, + sizeof(struct ql_rcv_buf_cb), + GFP_KERNEL); + if (qdev->lrg_buf == NULL) return -ENOMEM; - } qdev->lrg_buf_q_alloc_virt_addr = pci_alloc_consistent(qdev->pdev, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index c9e24a8..8163e5b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1171,12 +1171,9 @@ static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter) size = (size + 16) & ~0xF; p_cache = kzalloc(size, GFP_KERNEL); - - if (p_cache == NULL) { - dev_err(&adapter->pdev->dev, - "Failed to allocate memory for boot loader cache\n"); + if (p_cache == NULL) return -ENOMEM; - } + ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache, size / sizeof(u32)); if (ret) { @@ -1487,12 +1484,9 @@ int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_dev) ahw->reset.seq_error = 0; ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL); - - if (p_dev->ahw->reset.buff == NULL) { - dev_err(&p_dev->pdev->dev, - "%s: resource allocation failed\n", __func__); + if (p_dev->ahw->reset.buff == NULL) return -ENOMEM; - } + p_buff = p_dev->ahw->reset.buff; addr = QLC_83XX_RESET_TEMPLATE_ADDR; count = sizeof(struct qlc_83xx_reset_hdr) / sizeof(u32); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 88a2330..4ee92b2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -481,11 +481,9 @@ int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, const u8 *addr) } cur = kzalloc(sizeof(struct qlcnic_mac_list_s), GFP_ATOMIC); - if (cur == NULL) { - dev_err(&adapter->netdev->dev, - "failed to add mac address filter\n"); + if (cur == NULL) return -ENOMEM; - } + memcpy(cur->mac_addr, addr, ETH_ALEN); if (qlcnic_sre_macaddr_change(adapter, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index aa71eba..10ad25d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -184,18 +184,15 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter) struct qlcnic_host_rds_ring *rds_ring; struct qlcnic_host_sds_ring *sds_ring; struct qlcnic_rx_buffer *rx_buf; - int ring, i, size; - - struct net_device *netdev = adapter->netdev; + int ring, i; recv_ctx = adapter->recv_ctx; - size = adapter->max_rds_rings * sizeof(struct qlcnic_host_rds_ring); - rds_ring = kzalloc(size, GFP_KERNEL); - if (rds_ring == NULL) { - dev_err(&netdev->dev, "failed to allocate rds ring struct\n"); + rds_ring = kcalloc(adapter->max_rds_rings, + sizeof(struct qlcnic_host_rds_ring), GFP_KERNEL); + if (rds_ring == NULL) goto err_out; - } + recv_ctx->rds_rings = rds_ring; for (ring = 0; ring < adapter->max_rds_rings; ring++) { @@ -221,11 +218,8 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter) break; } rds_ring->rx_buf_arr = vzalloc(RCV_BUFF_RINGSIZE(rds_ring)); - if (rds_ring->rx_buf_arr == NULL) { - dev_err(&netdev->dev, - "Failed to allocate rx buffer ring %d\n", ring); + if (rds_ring->rx_buf_arr == NULL) goto err_out; - } INIT_LIST_HEAD(&rds_ring->free_list); /* @@ -448,10 +442,8 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter) } buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL); - if (buf == NULL) { - dev_err(&pdev->dev, "Unable to calloc memory for rom read.\n"); + if (buf == NULL) return -ENOMEM; - } for (i = 0; i < n; i++) { if (qlcnic_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 || @@ -657,10 +649,8 @@ static int qlcnic_get_flt_entry(struct qlcnic_adapter *adapter, u8 region, entry_size = flt_hdr.len - sizeof(struct qlcnic_flt_header); flt_entry = vzalloc(entry_size); - if (flt_entry == NULL) { - dev_warn(&adapter->pdev->dev, "error allocating memory\n"); + if (flt_entry == NULL) return -EIO; - } ret = qlcnic_rom_fast_read_words(adapter, QLCNIC_FLT_LOCATION + sizeof(struct qlcnic_flt_header), diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 6a59a11..fb0255a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -414,10 +414,8 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) adapter->msix_entries = kcalloc(num_msix, sizeof(struct msix_entry), GFP_KERNEL); - if (!adapter->msix_entries) { - dev_err(&pdev->dev, "failed allocating msix_entries\n"); + if (!adapter->msix_entries) return -ENOMEM; - } } adapter->max_sds_rings = 1; @@ -1536,8 +1534,6 @@ static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter) adapter->recv_ctx = kzalloc(sizeof(struct qlcnic_recv_context), GFP_KERNEL); if (!adapter->recv_ctx) { - dev_err(&adapter->pdev->dev, - "Failed to allocate recv ctx resources for adapter\n"); err = -ENOMEM; goto err_out; } @@ -1764,16 +1760,15 @@ void qlcnic_free_tx_rings(struct qlcnic_adapter *adapter) int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter, struct net_device *netdev) { - int ring, size, vector, index; + int ring, vector, index; struct qlcnic_host_tx_ring *tx_ring; struct qlcnic_cmd_buffer *cmd_buf_arr; - size = adapter->max_drv_tx_rings * sizeof(struct qlcnic_host_tx_ring); - tx_ring = kzalloc(size, GFP_KERNEL); - if (tx_ring == NULL) { - dev_err(&netdev->dev, "failed to allocate tx rings\n"); + tx_ring = kcalloc(adapter->max_drv_tx_rings, + sizeof(struct qlcnic_host_tx_ring), GFP_KERNEL); + if (tx_ring == NULL) return -ENOMEM; - } + adapter->tx_ring = tx_ring; for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) { @@ -1782,8 +1777,6 @@ int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter, tx_ring->txq = netdev_get_tx_queue(netdev, ring); cmd_buf_arr = vzalloc(TX_BUFF_RINGSIZE(tx_ring)); if (cmd_buf_arr == NULL) { - dev_err(&netdev->dev, - "failed to allocate cmd buffer ring\n"); qlcnic_free_tx_rings(adapter); return -ENOMEM; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c index 6281cbd..8dbc8e7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c @@ -931,12 +931,9 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter) return -EIO; fw_dump->data = vzalloc(dump_size); - if (!fw_dump->data) { - dev_info(&adapter->pdev->dev, - "Unable to allocate (%d KB) for fw dump\n", - dump_size / 1024); + if (!fw_dump->data) return -ENOMEM; - } + buffer = fw_dump->data; fw_dump->size = dump_size; no_entries = tmpl_hdr->num_entries; diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index e938158..325627e 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4572,7 +4572,6 @@ static int ql_init_device(struct pci_dev *pdev, struct net_device *ndev, qdev->mpi_coredump = vmalloc(sizeof(struct ql_mpi_coredump)); if (qdev->mpi_coredump == NULL) { - dev_err(&pdev->dev, "Coredump alloc failed.\n"); err = -ENOMEM; goto err_out2; } diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index 34f76e9..5b4103d 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -1192,9 +1192,8 @@ static int r6040_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) lp->mii_bus->name = "r6040_eth_mii"; snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", dev_name(&pdev->dev), card_idx); - lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); + lp->mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); if (!lp->mii_bus->irq) { - dev_err(&pdev->dev, "mii_bus irq allocation failed\n"); err = -ENOMEM; goto err_out_mdio; } diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index e195c1e..33e9617 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -891,18 +891,16 @@ static int sh_eth_ring_init(struct net_device *ndev) mdp->rx_buf_sz += NET_IP_ALIGN; /* Allocate RX and TX skb rings */ - mdp->rx_skbuff = kmalloc(sizeof(*mdp->rx_skbuff) * mdp->num_rx_ring, - GFP_KERNEL); + mdp->rx_skbuff = kmalloc_array(mdp->num_rx_ring, + sizeof(*mdp->rx_skbuff), GFP_KERNEL); if (!mdp->rx_skbuff) { - dev_err(&ndev->dev, "Cannot allocate Rx skb\n"); ret = -ENOMEM; return ret; } - mdp->tx_skbuff = kmalloc(sizeof(*mdp->tx_skbuff) * mdp->num_tx_ring, - GFP_KERNEL); + mdp->tx_skbuff = kmalloc_array(mdp->num_tx_ring, + sizeof(*mdp->tx_skbuff), GFP_KERNEL); if (!mdp->tx_skbuff) { - dev_err(&ndev->dev, "Cannot allocate Tx skb\n"); ret = -ENOMEM; goto skb_ring_free; } diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8c65729..fd4d659 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -530,17 +530,18 @@ static void init_dma_desc_rings(struct net_device *dev) DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", txsize, rxsize, bfsize); - priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); - priv->rx_skbuff = - kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); + priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t), + GFP_KERNEL); + priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *), + GFP_KERNEL); priv->dma_rx = (struct dma_desc *)dma_alloc_coherent(priv->device, rxsize * sizeof(struct dma_desc), &priv->dma_rx_phy, GFP_KERNEL); - priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, - GFP_KERNEL); + priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *), + GFP_KERNEL); priv->dma_tx = (struct dma_desc *)dma_alloc_coherent(priv->device, txsize * diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index c8c4915..e4c1c88 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -4342,7 +4342,7 @@ static int niu_alloc_rx_ring_info(struct niu *np, { BUILD_BUG_ON(sizeof(struct rxdma_mailbox) != 64); - rp->rxhash = kzalloc(MAX_RBR_RING_SIZE * sizeof(struct page *), + rp->rxhash = kcalloc(MAX_RBR_RING_SIZE, sizeof(struct page *), GFP_KERNEL); if (!rp->rxhash) return -ENOMEM; diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index b35e6a7..9e63bff 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1061,12 +1061,10 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } data->cpts_clock_shift = prop; - data->slave_data = kzalloc(sizeof(struct cpsw_slave_data) * - data->slaves, GFP_KERNEL); - if (!data->slave_data) { - pr_err("Could not allocate slave memory.\n"); + data->slave_data = kcalloc(data->slaves, sizeof(struct cpsw_slave_data), + GFP_KERNEL); + if (!data->slave_data) return -EINVAL; - } if (of_property_read_u32(node, "cpdma_channels", &prop)) { pr_err("Missing cpdma_channels property in the DT.\n"); diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index cca2550..d04a622 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -320,10 +320,8 @@ static int davinci_mdio_probe(struct platform_device *pdev) int ret, addr; data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(dev, "failed to alloc device data\n"); + if (!data) return -ENOMEM; - } data->bus = mdiobus_alloc(); if (!data->bus) { diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 5022093..9fc2ada 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -238,11 +238,9 @@ static int temac_dma_bd_init(struct net_device *ndev) int i; lp->rx_skb = kcalloc(RX_BD_NUM, sizeof(*lp->rx_skb), GFP_KERNEL); - if (!lp->rx_skb) { - dev_err(&ndev->dev, - "can't allocate memory for DMA RX buffer\n"); + if (!lp->rx_skb) goto out; - } + /* allocate the tx and rx ring buffer descriptors. */ /* returns a virtual address and a physical address. */ lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, -- cgit v0.10.2 From 38673c8218a6bcaac97b0243089e33617e28f43f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:11 +0000 Subject: drivers: net: usb: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index 76ee541..d012203 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -117,7 +117,6 @@ static int ax88172a_init_mdio(struct usbnet *dev) priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); if (!priv->mdio->irq) { - netdev_err(dev->net, "Could not allocate mdio->irq\n"); ret = -ENOMEM; goto mfree; } @@ -236,10 +235,9 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) usbnet_get_endpoints(dev, intf); priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - netdev_err(dev->net, "Could not allocate memory for private data\n"); + if (!priv) return -ENOMEM; - } + dev->driver_priv = priv; /* Get the MAC address */ diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index cd8ccb2..41e5dfb 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2317,10 +2317,8 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, serial->rx_urb[i]->transfer_buffer_length = 0; serial->rx_data[i] = kzalloc(serial->rx_data_length, GFP_KERNEL); - if (!serial->rx_data[i]) { - dev_err(dev, "%s - Out of memory\n", __func__); + if (!serial->rx_data[i]) goto exit; - } } /* TX, allocate urb and initialize */ @@ -2336,15 +2334,12 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, serial->tx_buffer_count = 0; serial->tx_data_length = tx_size; serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL); - if (!serial->tx_data) { - dev_err(dev, "%s - Out of memory\n", __func__); + if (!serial->tx_data) goto exit; - } + serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL); - if (!serial->tx_buffer) { - dev_err(dev, "%s - Out of memory\n", __func__); + if (!serial->tx_buffer) goto exit; - } return 0; exit: @@ -2580,10 +2575,8 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, } hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE, GFP_KERNEL); - if (!hso_net->mux_bulk_rx_buf_pool[i]) { - dev_err(&interface->dev, "Could not allocate rx buf\n"); + if (!hso_net->mux_bulk_rx_buf_pool[i]) goto exit; - } } hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!hso_net->mux_bulk_tx_urb) { @@ -2591,10 +2584,8 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface, goto exit; } hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL); - if (!hso_net->mux_bulk_tx_buf) { - dev_err(&interface->dev, "Could not allocate tx buf\n"); + if (!hso_net->mux_bulk_tx_buf) goto exit; - } add_net_device(hso_dev); @@ -2818,10 +2809,8 @@ struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface) mux->shared_intr_buf = kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize), GFP_KERNEL); - if (!mux->shared_intr_buf) { - dev_err(&interface->dev, "Could not allocate intr buf?\n"); + if (!mux->shared_intr_buf) goto exit; - } mutex_init(&mux->shared_int_lock); diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index 453aa6c..79ab243 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -459,11 +459,9 @@ static void sierra_net_kevent(struct work_struct *work) /* Query the modem for the LSI message */ buf = kzalloc(SIERRA_NET_USBCTL_BUF_LEN, GFP_KERNEL); - if (!buf) { - netdev_err(dev->net, - "failed to allocate buf for LS msg\n"); + if (!buf) return; - } + ifnum = priv->ifnum; len = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), USB_CDC_GET_ENCAPSULATED_RESPONSE, @@ -686,10 +684,8 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) } /* Initialize sierra private data */ priv = kzalloc(sizeof *priv, GFP_KERNEL); - if (!priv) { - dev_err(&dev->udev->dev, "No memory"); + if (!priv) return -ENOMEM; - } priv->usbnet = dev; priv->ifnum = ifacenum; diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 251a335..9abe517 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1393,13 +1393,11 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) } dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv), - GFP_KERNEL); + GFP_KERNEL); pdata = (struct smsc75xx_priv *)(dev->data[0]); - if (!pdata) { - netdev_warn(dev->net, "Unable to allocate smsc75xx_priv\n"); + if (!pdata) return -ENOMEM; - } pdata->dev = dev; diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 6a74a68..ff4fa37 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1116,13 +1116,11 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) } dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc95xx_priv), - GFP_KERNEL); + GFP_KERNEL); pdata = (struct smsc95xx_priv *)(dev->data[0]); - if (!pdata) { - netdev_warn(dev->net, "Unable to allocate struct smsc95xx_priv\n"); + if (!pdata) return -ENOMEM; - } spin_lock_init(&pdata->mac_cr_lock); diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f34b2eb..30c1b33 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1790,11 +1790,8 @@ int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype, } req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); - if (!req) { - netdev_err(dev->net, "Failed to allocate memory for %s\n", - __func__); + if (!req) goto fail_free_buf; - } req->bRequestType = reqtype; req->bRequest = cmd; -- cgit v0.10.2 From 1d5d1fdc52b879d8d2bb40546472b4dcfd99f118 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:12 +0000 Subject: wan: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Hoist assigns from if tests. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 6aed238..0179cef 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -795,8 +795,8 @@ static ssize_t cosa_read(struct file *file, if (mutex_lock_interruptible(&chan->rlock)) return -ERESTARTSYS; - if ((chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL)) == NULL) { - pr_info("%s: cosa_read() - OOM\n", cosa->name); + chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL); + if (chan->rxdata == NULL) { mutex_unlock(&chan->rlock); return -ENOMEM; } @@ -874,9 +874,8 @@ static ssize_t cosa_write(struct file *file, count = COSA_MTU; /* Allocate the buffer */ - if ((kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA)) == NULL) { - pr_notice("%s: cosa_write() OOM - dropping packet\n", - cosa->name); + kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA); + if (kbuf == NULL) { up(&chan->wsem); return -ENOMEM; } diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 56941d6..3f0c4f2 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2448,11 +2448,9 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Allocate driver private data */ - card = kzalloc(sizeof (struct fst_card_info), GFP_KERNEL); - if (card == NULL) { - pr_err("FarSync card found but insufficient memory for driver storage\n"); + card = kzalloc(sizeof(struct fst_card_info), GFP_KERNEL); + if (card == NULL) return -ENOMEM; - } /* Try to enable the device */ if ((err = pci_enable_device(pdev)) != 0) { diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index 10cc7df..a0a932c 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -280,14 +280,13 @@ int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto, if (!try_module_get(proto->module)) return -ENOSYS; - if (size) - if ((dev_to_hdlc(dev)->state = kmalloc(size, - GFP_KERNEL)) == NULL) { - netdev_warn(dev, - "Memory squeeze on hdlc_proto_attach()\n"); + if (size) { + dev_to_hdlc(dev)->state = kmalloc(size, GFP_KERNEL); + if (dev_to_hdlc(dev)->state == NULL) { module_put(proto->module); return -ENOBUFS; } + } dev_to_hdlc(dev)->proto = proto; return 0; } diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 44db8b7..5895f19 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -128,7 +128,6 @@ static int x25_asy_change_mtu(struct net_device *dev, int newmtu) rbuff = kmalloc(len + 4, GFP_ATOMIC); if (xbuff == NULL || rbuff == NULL) { - netdev_warn(dev, "unable to grow X.25 buffers, MTU change cancelled\n"); kfree(xbuff); kfree(rbuff); return -ENOMEM; -- cgit v0.10.2 From 9d11bd1592fba0b9231d3ce8ab61977db7e03e27 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:13 +0000 Subject: wimax: Remove unnecessary alloc/OOM messages, alloc cleanups alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Remove now unused size variables. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 37becfc..8077e6e 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -1351,24 +1351,18 @@ int i2400m_rx_setup(struct i2400m *i2400m) i2400m->rx_reorder = i2400m_rx_reorder_disabled? 0 : 1; if (i2400m->rx_reorder) { unsigned itr; - size_t size; struct i2400m_roq_log *rd; result = -ENOMEM; - size = sizeof(i2400m->rx_roq[0]) * (I2400M_RO_CIN + 1); - i2400m->rx_roq = kzalloc(size, GFP_KERNEL); - if (i2400m->rx_roq == NULL) { - dev_err(dev, "RX: cannot allocate %zu bytes for " - "reorder queues\n", size); + i2400m->rx_roq = kcalloc(I2400M_RO_CIN + 1, + sizeof(i2400m->rx_roq[0]), GFP_KERNEL); + if (i2400m->rx_roq == NULL) goto error_roq_alloc; - } - size = sizeof(*i2400m->rx_roq[0].log) * (I2400M_RO_CIN + 1); - rd = kzalloc(size, GFP_KERNEL); + rd = kcalloc(I2400M_RO_CIN + 1, sizeof(*i2400m->rx_roq[0].log), + GFP_KERNEL); if (rd == NULL) { - dev_err(dev, "RX: cannot allocate %zu bytes for " - "reorder queues log areas\n", size); result = -ENOMEM; goto error_roq_log_alloc; } diff --git a/drivers/net/wimax/i2400m/usb-notif.c b/drivers/net/wimax/i2400m/usb-notif.c index d44b545..fc1355d 100644 --- a/drivers/net/wimax/i2400m/usb-notif.c +++ b/drivers/net/wimax/i2400m/usb-notif.c @@ -199,7 +199,6 @@ int i2400mu_notification_setup(struct i2400mu *i2400mu) d_fnstart(4, dev, "(i2400m %p)\n", i2400mu); buf = kmalloc(I2400MU_MAX_NOTIFICATION_LEN, GFP_KERNEL | GFP_DMA); if (buf == NULL) { - dev_err(dev, "notification: buffer allocation failed\n"); ret = -ENOMEM; goto error_buf_alloc; } -- cgit v0.10.2 From 0d2e7a5c608063f72048899d20505c2ee130566c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:14 +0000 Subject: wireless: Remove unnecessary alloc/OOM messages, alloc cleanups alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Remove now unused variables. Remove unnecessary memset after kzalloc->kcalloc. Whitespace cleanups for these changes. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 630577d..956024a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -69,10 +69,9 @@ static int airo_probe(struct pcmcia_device *p_dev) /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); - if (!local) { - printk(KERN_ERR "airo_cs: no memory for new device\n"); + if (!local) return -ENOMEM; - } + p_dev->priv = local; return airo_config(p_dev); diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 77fa428..5ac5f7a 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -2164,10 +2164,8 @@ static int at76_alloc_urbs(struct at76_priv *priv, buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE; priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!priv->bulk_out_buffer) { - dev_err(&interface->dev, "cannot allocate output buffer\n"); + if (!priv->bulk_out_buffer) return -ENOMEM; - } at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); diff --git a/drivers/net/wireless/ath/ath9k/dfs_pattern_detector.c b/drivers/net/wireless/ath/ath9k/dfs_pattern_detector.c index 24877b0..467b600 100644 --- a/drivers/net/wireless/ath/ath9k/dfs_pattern_detector.c +++ b/drivers/net/wireless/ath/ath9k/dfs_pattern_detector.c @@ -288,11 +288,11 @@ struct dfs_pattern_detector * dfs_pattern_detector_init(enum nl80211_dfs_regions region) { struct dfs_pattern_detector *dpd; + dpd = kmalloc(sizeof(*dpd), GFP_KERNEL); - if (dpd == NULL) { - pr_err("allocation of dfs_pattern_detector failed\n"); + if (dpd == NULL) return NULL; - } + *dpd = default_dpd; INIT_LIST_HEAD(&dpd->channel_detectors); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ded03d2..b42930f 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -79,10 +79,9 @@ static int atmel_probe(struct pcmcia_device *p_dev) /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); - if (!local) { - printk(KERN_ERR "atmel_cs: no memory for new device\n"); + if (!local) return -ENOMEM; - } + p_dev->priv = local; return atmel_config(p_dev); diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index d92b21a..04d5e64 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -4478,13 +4478,10 @@ static int ipw2100_tx_allocate(struct ipw2100_priv *priv) return err; } - priv->tx_buffers = - kmalloc(TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet), - GFP_ATOMIC); + priv->tx_buffers = kmalloc_array(TX_PENDED_QUEUE_LENGTH, + sizeof(struct ipw2100_tx_packet), + GFP_ATOMIC); if (!priv->tx_buffers) { - printk(KERN_ERR DRV_NAME - ": %s: alloc failed form tx buffers.\n", - priv->net_dev->name); bd_queue_free(priv, &priv->tx_queue); return -ENOMEM; } diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 230f8eb..a7dcb2e 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -2081,10 +2081,8 @@ struct wireless_dev *lbs_cfg_alloc(struct device *dev) lbs_deb_enter(LBS_DEB_CFG80211); wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); - if (!wdev) { - dev_err(dev, "cannot allocate wireless device\n"); + if (!wdev) return ERR_PTR(-ENOMEM); - } wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); if (!wdev->wiphy) { diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index 9cd6216..7b0ae24 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -533,11 +533,8 @@ void mwifiex_create_ba_tbl(struct mwifiex_private *priv, u8 *ra, int tid, if (!mwifiex_get_ba_tbl(priv, tid, ra)) { new_node = kzalloc(sizeof(struct mwifiex_tx_ba_stream_tbl), GFP_ATOMIC); - if (!new_node) { - dev_err(priv->adapter->dev, - "%s: failed to alloc new_node\n", __func__); + if (!new_node) return; - } INIT_LIST_HEAD(&new_node->list); diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c index 4a97acd..5e796f8 100644 --- a/drivers/net/wireless/mwifiex/11n_rxreorder.c +++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c @@ -272,11 +272,8 @@ mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta, } /* if !tbl then create one */ new_node = kzalloc(sizeof(struct mwifiex_rx_reorder_tbl), GFP_KERNEL); - if (!new_node) { - dev_err(priv->adapter->dev, "%s: failed to alloc new_node\n", - __func__); + if (!new_node) return; - } INIT_LIST_HEAD(&new_node->list); new_node->tid = tid; diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index ab92e79..8ba4819 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1820,10 +1820,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); - if (!priv->user_scan_cfg) { - dev_err(priv->adapter->dev, "failed to alloc scan_req\n"); + if (!priv->user_scan_cfg) return -ENOMEM; - } priv->scan_request = request; diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 5f438e6..2b125be 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -334,20 +334,15 @@ static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter) int mwifiex_alloc_cmd_buffer(struct mwifiex_adapter *adapter) { struct cmd_ctrl_node *cmd_array; - u32 buf_size; u32 i; /* Allocate and initialize struct cmd_ctrl_node */ - buf_size = sizeof(struct cmd_ctrl_node) * MWIFIEX_NUM_OF_CMD_BUFFER; - cmd_array = kzalloc(buf_size, GFP_KERNEL); - if (!cmd_array) { - dev_err(adapter->dev, "%s: failed to alloc cmd_array\n", - __func__); + cmd_array = kcalloc(MWIFIEX_NUM_OF_CMD_BUFFER, + sizeof(struct cmd_ctrl_node), GFP_KERNEL); + if (!cmd_array) return -ENOMEM; - } adapter->cmd_pool = cmd_array; - memset(adapter->cmd_pool, 0, buf_size); /* Allocate and initialize command buffers */ for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++) { diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index e00b806..84848c3 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -39,11 +39,8 @@ static int mwifiex_add_bss_prio_tbl(struct mwifiex_private *priv) unsigned long flags; bss_prio = kzalloc(sizeof(struct mwifiex_bss_prio_node), GFP_KERNEL); - if (!bss_prio) { - dev_err(adapter->dev, "%s: failed to alloc bss_prio\n", - __func__); + if (!bss_prio) return -ENOMEM; - } bss_prio->priv = priv; INIT_LIST_HEAD(&bss_prio->list); diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 9189a32..f0de401 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1309,7 +1309,6 @@ int mwifiex_scan_networks(struct mwifiex_private *priv, struct cmd_ctrl_node *cmd_node; union mwifiex_scan_cmd_config_tlv *scan_cfg_out; struct mwifiex_ie_types_chan_list_param_set *chan_list_out; - u32 buf_size; struct mwifiex_chan_scan_param_set *scan_chan_list; u8 filtered_scan; u8 scan_current_chan_only; @@ -1332,18 +1331,16 @@ int mwifiex_scan_networks(struct mwifiex_private *priv, spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv), - GFP_KERNEL); + GFP_KERNEL); if (!scan_cfg_out) { - dev_err(adapter->dev, "failed to alloc scan_cfg_out\n"); ret = -ENOMEM; goto done; } - buf_size = sizeof(struct mwifiex_chan_scan_param_set) * - MWIFIEX_USER_SCAN_CHAN_MAX; - scan_chan_list = kzalloc(buf_size, GFP_KERNEL); + scan_chan_list = kcalloc(MWIFIEX_USER_SCAN_CHAN_MAX, + sizeof(struct mwifiex_chan_scan_param_set), + GFP_KERNEL); if (!scan_chan_list) { - dev_err(adapter->dev, "failed to alloc scan_chan_list\n"); kfree(scan_cfg_out); ret = -ENOMEM; goto done; @@ -1461,12 +1458,9 @@ static int mwifiex_update_curr_bss_params(struct mwifiex_private *priv, unsigned long flags; /* Allocate and fill new bss descriptor */ - bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor), - GFP_KERNEL); - if (!bss_desc) { - dev_err(priv->adapter->dev, " failed to alloc bss_desc\n"); + bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor), GFP_KERNEL); + if (!bss_desc) return -ENOMEM; - } ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc); if (ret) @@ -1879,10 +1873,8 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv, } scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); - if (!scan_cfg) { - dev_err(adapter->dev, "failed to alloc scan_cfg\n"); + if (!scan_cfg) return -ENOMEM; - } scan_cfg->ssid_list = req_ssid; scan_cfg->num_ssids = 1; @@ -1996,11 +1988,8 @@ mwifiex_save_curr_bcn(struct mwifiex_private *priv) kfree(priv->curr_bcn_buf); priv->curr_bcn_buf = kmalloc(curr_bss->beacon_buf_size, GFP_ATOMIC); - if (!priv->curr_bcn_buf) { - dev_err(priv->adapter->dev, - "failed to alloc curr_bcn_buf\n"); + if (!priv->curr_bcn_buf) return; - } } memcpy(priv->curr_bcn_buf, curr_bss->beacon_buf, diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 5a1c1d0..31d7b2b 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -718,11 +718,8 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, /* Assume that the allocated buffer is 8-byte aligned */ fwbuf = kzalloc(MWIFIEX_UPLD_SIZE, GFP_KERNEL); - if (!fwbuf) { - dev_err(adapter->dev, - "unable to alloc buffer for FW. Terminating dnld\n"); + if (!fwbuf) return -ENOMEM; - } /* Perform firmware data transfer */ do { @@ -1520,7 +1517,6 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter, card->mpa_tx.buf = kzalloc(mpa_tx_buf_size, GFP_KERNEL); if (!card->mpa_tx.buf) { - dev_err(adapter->dev, "could not alloc buffer for MP-A TX\n"); ret = -1; goto error; } @@ -1529,7 +1525,6 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter, card->mpa_rx.buf = kzalloc(mpa_rx_buf_size, GFP_KERNEL); if (!card->mpa_rx.buf) { - dev_err(adapter->dev, "could not alloc buffer for MP-A RX\n"); ret = -1; goto error; } @@ -1682,10 +1677,8 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter) /* Allocate buffers for SDIO MP-A */ card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL); - if (!card->mp_regs) { - dev_err(adapter->dev, "failed to alloc mp_regs\n"); + if (!card->mp_regs) return -ENOMEM; - } ret = mwifiex_alloc_sdio_mpa_buffers(adapter, SDIO_MP_TX_AGGR_DEF_BUF_SIZE, diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index f542bb8..b8fa76a 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -266,11 +266,9 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, /* Allocate and fill new bss descriptor */ bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor), - GFP_KERNEL); - if (!bss_desc) { - dev_err(priv->adapter->dev, " failed to alloc bss_desc\n"); + GFP_KERNEL); + if (!bss_desc) return -ENOMEM; - } ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc); if (ret) @@ -636,11 +634,8 @@ int mwifiex_set_tx_power(struct mwifiex_private *priv, } } buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL); - if (!buf) { - dev_err(priv->adapter->dev, "%s: failed to alloc cmd buffer\n", - __func__); + if (!buf) return -ENOMEM; - } txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf; txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET); diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 135d96d..32adc87 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -109,12 +109,9 @@ mwifiex_wmm_allocate_ralist_node(struct mwifiex_adapter *adapter, u8 *ra) struct mwifiex_ra_list_tbl *ra_list; ra_list = kzalloc(sizeof(struct mwifiex_ra_list_tbl), GFP_ATOMIC); - - if (!ra_list) { - dev_err(adapter->dev, "%s: failed to alloc ra_list\n", - __func__); + if (!ra_list) return NULL; - } + INIT_LIST_HEAD(&ra_list->list); skb_queue_head_init(&ra_list->skb_head); diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index 1e802f8..38ec8d1 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -853,12 +853,8 @@ void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw) int err; desc = kmalloc(sizeof(*desc), GFP_ATOMIC); - if (!desc) { - printk(KERN_WARNING - "%s: Can't allocate space for RX descriptor\n", - dev->name); + if (!desc) goto update_stats; - } rxfid = hermes_read_regn(hw, RXFID); @@ -1336,10 +1332,9 @@ static void qbuf_scan(struct orinoco_private *priv, void *buf, unsigned long flags; sd = kmalloc(sizeof(*sd), GFP_ATOMIC); - if (!sd) { - printk(KERN_ERR "%s: failed to alloc memory\n", __func__); + if (!sd) return; - } + sd->buf = buf; sd->len = len; sd->type = type; @@ -1357,10 +1352,9 @@ static void qabort_scan(struct orinoco_private *priv) unsigned long flags; sd = kmalloc(sizeof(*sd), GFP_ATOMIC); - if (!sd) { - printk(KERN_ERR "%s: failed to alloc memory\n", __func__); + if (!sd) return; - } + sd->len = -1; /* Abort */ spin_lock_irqsave(&priv->scan_lock, flags); diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 800a165..62ac607 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -510,11 +510,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) return err; tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); - if (!buf) { - dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware" - "upload buffer!\n"); + if (!buf) return -ENOMEM; - } left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size); strcpy(buf, p54u_firmware_upload_3887); @@ -637,11 +634,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) const u8 *data; buf = kmalloc(512, GFP_KERNEL); - if (!buf) { - dev_err(&priv->udev->dev, "(p54usb) firmware buffer " - "alloc failed!\n"); + if (!buf) return -ENOMEM; - } #define P54U_WRITE(type, addr, data) \ do {\ diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index c5404cb..9f19cce 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -123,11 +123,8 @@ islpci_mgmt_rx_fill(struct net_device *ndev) if (buf->mem == NULL) { buf->mem = kmalloc(MGMT_FRAME_SIZE, GFP_ATOMIC); - if (!buf->mem) { - printk(KERN_WARNING - "Error allocating management frame.\n"); + if (!buf->mem) return -ENOMEM; - } buf->size = MGMT_FRAME_SIZE; } if (buf->pci_addr == 0) { @@ -356,14 +353,11 @@ islpci_mgt_receive(struct net_device *ndev) /* Determine frame size, skipping OID_INL_TUNNEL headers. */ size = PIMFOR_HEADER_SIZE + header->length; - frame = kmalloc(sizeof (struct islpci_mgmtframe) + size, + frame = kmalloc(sizeof(struct islpci_mgmtframe) + size, GFP_ATOMIC); - if (!frame) { - printk(KERN_WARNING - "%s: Out of memory, cannot handle oid 0x%08x\n", - ndev->name, header->oid); + if (!frame) continue; - } + frame->ndev = ndev; memcpy(&frame->buf, header, size); frame->header = (pimfor_header_t *) frame->buf; diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index abe1d03..9bb3f22 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1621,11 +1621,8 @@ static void set_multicast_list(struct usbnet *usbdev) } else if (mc_count) { int i = 0; - mc_addrs = kmalloc(mc_count * ETH_ALEN, GFP_ATOMIC); + mc_addrs = kmalloc_array(mc_count, ETH_ALEN, GFP_ATOMIC); if (!mc_addrs) { - netdev_warn(usbdev->net, - "couldn't alloc %d bytes of memory\n", - mc_count * ETH_ALEN); netif_addr_unlock_bh(usbdev->net); return; } diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 646f703..a3a20be 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -229,10 +229,8 @@ static int wl1271_probe(struct sdio_func *func, return -ENODEV; glue = kzalloc(sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&func->dev, "can't allocate glue\n"); + if (!glue) goto out; - } glue->dev = &func->dev; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index f06f477..18cadc0 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -87,11 +87,8 @@ static void wl12xx_spi_reset(struct device *child) struct spi_message m; cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); - if (!cmd) { - dev_err(child->parent, - "could not allocate cmd for spi reset\n"); + if (!cmd) return; - } memset(&t, 0, sizeof(t)); spi_message_init(&m); @@ -115,11 +112,8 @@ static void wl12xx_spi_init(struct device *child) struct spi_message m; cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); - if (!cmd) { - dev_err(child->parent, - "could not allocate cmd for spi init\n"); + if (!cmd) return; - } memset(crc, 0, sizeof(crc)); memset(&t, 0, sizeof(t)); @@ -340,10 +334,8 @@ static int wl1271_probe(struct spi_device *spi) pdata->ops = &spi_ops; glue = kzalloc(sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&spi->dev, "can't allocate glue\n"); + if (!glue) goto out; - } glue->dev = &spi->dev; diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index ef2b171..7ef0b4a 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -155,7 +155,6 @@ static int upload_code(struct usb_device *udev, */ p = kmalloc(MAX_TRANSFER_SIZE, GFP_KERNEL); if (!p) { - dev_err(&udev->dev, "out of memory\n"); r = -ENOMEM; goto error; } -- cgit v0.10.2 From e68ed8f0d8f5b0f59c0f1098e37007f4e6c9ef86 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 3 Feb 2013 17:28:15 +0000 Subject: drivers:net:misc: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c index ce555d9..6636022 100644 --- a/drivers/net/hamradio/dmascc.c +++ b/drivers/net/hamradio/dmascc.c @@ -463,13 +463,8 @@ static int __init setup_adapter(int card_base, int type, int n) /* Initialize what is necessary for write_scc and write_scc_data */ info = kzalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA); - if (!info) { - printk(KERN_ERR "dmascc: " - "could not allocate memory for %s at %#3x\n", - hw[type].name, card_base); + if (!info) goto out; - } - info->dev[0] = alloc_netdev(0, "", dev_setup); if (!info->dev[0]) { diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c index 41eb8ff..5c87eef 100644 --- a/drivers/net/phy/spi_ks8995.c +++ b/drivers/net/phy/spi_ks8995.c @@ -275,10 +275,8 @@ static int ks8995_probe(struct spi_device *spi) pdata = spi->dev.platform_data; ks = kzalloc(sizeof(*ks), GFP_KERNEL); - if (!ks) { - dev_err(&spi->dev, "no memory for private data\n"); + if (!ks) return -ENOMEM; - } mutex_init(&ks->lock); ks->pdata = pdata; diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index eda2042..381a2d8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -976,10 +976,8 @@ static void virtnet_set_rx_mode(struct net_device *dev) buf = kzalloc(((uc_count + mc_count) * ETH_ALEN) + (2 * sizeof(mac_data->entries)), GFP_ATOMIC); mac_data = buf; - if (!buf) { - dev_warn(&dev->dev, "No memory for MAC address buffer\n"); + if (!buf) return; - } sg_init_table(sg, 2); -- cgit v0.10.2 From 4c876616298f8b07614892ac7aa82c768e435fda Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Sun, 3 Feb 2013 20:30:11 +0000 Subject: be2net: fix re-loaded PF driver to re-gain control of its VFs Currently, when the PF driver is unloaded and re-loaded while VFs are attached to VMs, it loses control of its VFs. The PF driver now uses the newly defined/created GET_IFACE_LIST cmd (available in FW ver >= 4.6) to query the if_id of the VFs (enabled in its previous life). The PF driver then uses the if_id for further VF configuration. The GET_IFACE_MAC_LIST cmd has also implemented in BE3 FW for PF to query pmac-ids used by its VFs. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 8a250c3..8b04880 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -3138,6 +3138,39 @@ err: return status; } +int be_cmd_get_if_id(struct be_adapter *adapter, struct be_vf_cfg *vf_cfg, + int vf_num) +{ + struct be_mcc_wrb *wrb; + struct be_cmd_req_get_iface_list *req; + struct be_cmd_resp_get_iface_list *resp; + int status; + + spin_lock_bh(&adapter->mcc_lock); + + wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } + req = embedded_payload(wrb); + + be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, + OPCODE_COMMON_GET_IFACE_LIST, sizeof(*resp), + wrb, NULL); + req->hdr.domain = vf_num + 1; + + status = be_mcc_notify_wait(adapter); + if (!status) { + resp = (struct be_cmd_resp_get_iface_list *)req; + vf_cfg->if_handle = le32_to_cpu(resp->if_desc.if_id); + } + +err: + spin_unlock_bh(&adapter->mcc_lock); + return status; +} + /* Uses sync mcc */ int be_cmd_enable_vf(struct be_adapter *adapter, u8 domain) { diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index d6552e1..9697086 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -203,6 +203,7 @@ struct be_mcc_mailbox { #define OPCODE_COMMON_GET_FN_PRIVILEGES 170 #define OPCODE_COMMON_READ_OBJECT 171 #define OPCODE_COMMON_WRITE_OBJECT 172 +#define OPCODE_COMMON_GET_IFACE_LIST 194 #define OPCODE_COMMON_ENABLE_DISABLE_VF 196 #define OPCODE_ETH_RSS_CONFIG 1 @@ -1795,6 +1796,23 @@ static inline bool check_privilege(struct be_adapter *adapter, u32 flags) return flags & adapter->cmd_privileges ? true : false; } +/************** Get IFACE LIST *******************/ +struct be_if_desc { + u32 if_id; + u32 cap_flags; + u32 en_flags; +}; + +struct be_cmd_req_get_iface_list { + struct be_cmd_req_hdr hdr; +}; + +struct be_cmd_resp_get_iface_list { + struct be_cmd_req_hdr hdr; + u32 if_cnt; + struct be_if_desc if_desc; +}; + extern int be_pci_fnum_get(struct be_adapter *adapter); extern int be_fw_wait_ready(struct be_adapter *adapter); extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr, @@ -1917,4 +1935,6 @@ extern int be_cmd_get_profile_config(struct be_adapter *adapter, u32 *cap_flags, extern int be_cmd_set_profile_config(struct be_adapter *adapter, u32 bps, u8 domain); +extern int be_cmd_get_if_id(struct be_adapter *adapter, + struct be_vf_cfg *vf_cfg, int vf_num); extern int be_cmd_enable_vf(struct be_adapter *adapter, u8 domain); diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 5c99570..7d53481 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2597,7 +2597,7 @@ static int be_setup_wol(struct be_adapter *adapter, bool enable) * These addresses are programmed in the ASIC by the PF and the VF driver * queries for the MAC address during its probe. */ -static inline int be_vf_eth_addr_config(struct be_adapter *adapter) +static int be_vf_eth_addr_config(struct be_adapter *adapter) { u32 vf; int status = 0; @@ -2626,13 +2626,34 @@ static inline int be_vf_eth_addr_config(struct be_adapter *adapter) return status; } +static int be_vfs_mac_query(struct be_adapter *adapter) +{ + int status, vf; + u8 mac[ETH_ALEN]; + struct be_vf_cfg *vf_cfg; + bool active; + + for_all_vfs(adapter, vf_cfg, vf) { + be_cmd_get_mac_from_list(adapter, mac, &active, + &vf_cfg->pmac_id, 0); + + status = be_cmd_mac_addr_query(adapter, mac, false, + vf_cfg->if_handle, 0); + if (status) + return status; + memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); + } + return 0; +} + static void be_vf_clear(struct be_adapter *adapter) { struct be_vf_cfg *vf_cfg; u32 vf; if (be_find_vfs(adapter, ASSIGNED)) { - dev_warn(&adapter->pdev->dev, "VFs are assigned to VMs\n"); + dev_warn(&adapter->pdev->dev, + "VFs are assigned to VMs: not disabling VFs\n"); goto done; } @@ -2681,21 +2702,29 @@ static int be_clear(struct be_adapter *adapter) return 0; } -static void be_get_vf_if_cap_flags(struct be_adapter *adapter, - u32 *cap_flags, u8 domain) +static int be_vfs_if_create(struct be_adapter *adapter) { - bool profile_present = false; + struct be_vf_cfg *vf_cfg; + u32 cap_flags, en_flags, vf; int status; - if (lancer_chip(adapter)) { - status = be_cmd_get_profile_config(adapter, cap_flags, domain); - if (!status) - profile_present = true; - } + cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_MULTICAST; - if (!profile_present) - *cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | - BE_IF_FLAGS_MULTICAST; + for_all_vfs(adapter, vf_cfg, vf) { + if (!BE3_chip(adapter)) + be_cmd_get_profile_config(adapter, &cap_flags, vf + 1); + + /* If a FW profile exists, then cap_flags are updated */ + en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED | + BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_MULTICAST); + status = be_cmd_if_create(adapter, cap_flags, en_flags, + &vf_cfg->if_handle, vf + 1); + if (status) + goto err; + } +err: + return status; } static int be_vf_setup_init(struct be_adapter *adapter) @@ -2718,65 +2747,70 @@ static int be_vf_setup_init(struct be_adapter *adapter) static int be_vf_setup(struct be_adapter *adapter) { struct be_vf_cfg *vf_cfg; - struct device *dev = &adapter->pdev->dev; - u32 cap_flags, en_flags, vf; u16 def_vlan, lnk_speed; - int status, enabled_vfs; - - enabled_vfs = be_find_vfs(adapter, ENABLED); - if (enabled_vfs) { - dev_warn(dev, "%d VFs are already enabled\n", enabled_vfs); - dev_warn(dev, "Ignoring num_vfs=%d setting\n", num_vfs); - return 0; - } - - if (num_vfs > adapter->dev_num_vfs) { - dev_warn(dev, "Device supports %d VFs and not %d\n", - adapter->dev_num_vfs, num_vfs); - num_vfs = adapter->dev_num_vfs; - } + int status, old_vfs, vf; + struct device *dev = &adapter->pdev->dev; - status = pci_enable_sriov(adapter->pdev, num_vfs); - if (!status) { - adapter->num_vfs = num_vfs; + old_vfs = be_find_vfs(adapter, ENABLED); + if (old_vfs) { + dev_info(dev, "%d VFs are already enabled\n", old_vfs); + if (old_vfs != num_vfs) + dev_warn(dev, "Ignoring num_vfs=%d setting\n", num_vfs); + adapter->num_vfs = old_vfs; } else { - /* Platform doesn't support SRIOV though device supports it */ - dev_warn(dev, "SRIOV enable failed\n"); - return 0; + if (num_vfs > adapter->dev_num_vfs) + dev_info(dev, "Device supports %d VFs and not %d\n", + adapter->dev_num_vfs, num_vfs); + adapter->num_vfs = min_t(u16, num_vfs, adapter->dev_num_vfs); + + status = pci_enable_sriov(adapter->pdev, num_vfs); + if (status) { + dev_err(dev, "SRIOV enable failed\n"); + adapter->num_vfs = 0; + return 0; + } } status = be_vf_setup_init(adapter); if (status) goto err; - for_all_vfs(adapter, vf_cfg, vf) { - be_get_vf_if_cap_flags(adapter, &cap_flags, vf + 1); - - en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED | - BE_IF_FLAGS_BROADCAST | - BE_IF_FLAGS_MULTICAST); - - status = be_cmd_if_create(adapter, cap_flags, en_flags, - &vf_cfg->if_handle, vf + 1); + if (old_vfs) { + for_all_vfs(adapter, vf_cfg, vf) { + status = be_cmd_get_if_id(adapter, vf_cfg, vf); + if (status) + goto err; + } + } else { + status = be_vfs_if_create(adapter); if (status) goto err; } - if (!enabled_vfs) { + if (old_vfs) { + status = be_vfs_mac_query(adapter); + if (status) + goto err; + } else { status = be_vf_eth_addr_config(adapter); if (status) goto err; } for_all_vfs(adapter, vf_cfg, vf) { - lnk_speed = 1000; - status = be_cmd_set_qos(adapter, lnk_speed, vf + 1); - if (status) - goto err; - vf_cfg->tx_rate = lnk_speed * 10; + /* BE3 FW, by default, caps VF TX-rate to 100mbps. + * Allow full available bandwidth + */ + if (BE3_chip(adapter) && !old_vfs) + be_cmd_set_qos(adapter, 1000, vf+1); + + status = be_cmd_link_status_query(adapter, &lnk_speed, + NULL, vf + 1); + if (!status) + vf_cfg->tx_rate = lnk_speed; status = be_cmd_get_hsw_config(adapter, &def_vlan, - vf + 1, vf_cfg->if_handle); + vf + 1, vf_cfg->if_handle); if (status) goto err; vf_cfg->def_vid = def_vlan; @@ -2785,6 +2819,8 @@ static int be_vf_setup(struct be_adapter *adapter) } return 0; err: + dev_err(dev, "VF setup failed\n"); + be_vf_clear(adapter); return status; } @@ -2838,12 +2874,12 @@ static int be_get_mac_addr(struct be_adapter *adapter, u8 *mac, u32 if_handle, static void be_get_resources(struct be_adapter *adapter) { - int status; + u16 dev_num_vfs; + int pos, status; bool profile_present = false; - if (lancer_chip(adapter)) { + if (!BEx_chip(adapter)) { status = be_cmd_get_func_config(adapter); - if (!status) profile_present = true; } @@ -2899,13 +2935,21 @@ static void be_get_resources(struct be_adapter *adapter) if (adapter->function_caps & BE_FUNCTION_CAPS_RSS) adapter->if_cap_flags |= BE_IF_FLAGS_RSS; } + + pos = pci_find_ext_capability(adapter->pdev, PCI_EXT_CAP_ID_SRIOV); + if (pos) { + pci_read_config_word(adapter->pdev, pos + PCI_SRIOV_TOTAL_VF, + &dev_num_vfs); + if (BE3_chip(adapter)) + dev_num_vfs = min_t(u16, dev_num_vfs, MAX_VFS); + adapter->dev_num_vfs = dev_num_vfs; + } } /* Routine to query per function resource limits */ static int be_get_config(struct be_adapter *adapter) { - int pos, status; - u16 dev_num_vfs; + int status; status = be_cmd_query_fw_cfg(adapter, &adapter->port_num, &adapter->function_mode, @@ -2923,14 +2967,6 @@ static int be_get_config(struct be_adapter *adapter) goto err; } - pos = pci_find_ext_capability(adapter->pdev, PCI_EXT_CAP_ID_SRIOV); - if (pos) { - pci_read_config_word(adapter->pdev, pos + PCI_SRIOV_TOTAL_VF, - &dev_num_vfs); - if (!lancer_chip(adapter)) - dev_num_vfs = min_t(u16, dev_num_vfs, MAX_VFS); - adapter->dev_num_vfs = dev_num_vfs; - } err: return status; } -- cgit v0.10.2 From 2b3c9a850c3f2da7430c39dde0fb5cab56f8501d Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Sun, 3 Feb 2013 20:30:12 +0000 Subject: be2net: update driver version to 4.6.x Signed-off-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 4eba17b..4010cb7 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -34,7 +34,7 @@ #include "be_hw.h" #include "be_roce.h" -#define DRV_VER "4.4.161.0u" +#define DRV_VER "4.6.62.0u" #define DRV_NAME "be2net" #define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC" #define BE3_NAME "ServerEngines BladeEngine3 10Gbps NIC" -- cgit v0.10.2 From 25cc4ae913a46bcc11b03c37bec59568f2122a36 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Sun, 3 Feb 2013 20:32:57 +0000 Subject: net: remove redundant check for timer pending state before del_timer As in del_timer() there has already placed a timer_pending() function to check whether the timer to be deleted is pending or not, it's unnecessary to check timer pending state again before del_timer() is called. Signed-off-by: Ying Xue Cc: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 201fdf7..b23e271 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -257,7 +257,7 @@ static void rfcomm_session_clear_timer(struct rfcomm_session *s) { BT_DBG("session %p state %ld", s, s->state); - if (timer_pending(&s->timer) && del_timer(&s->timer)) + if (del_timer(&s->timer)) rfcomm_session_put(s); } @@ -285,7 +285,7 @@ static void rfcomm_dlc_clear_timer(struct rfcomm_dlc *d) { BT_DBG("dlc %p state %ld", d, d->state); - if (timer_pending(&d->timer) && del_timer(&d->timer)) + if (del_timer(&d->timer)) rfcomm_dlc_put(d); } diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c index 3476ec4..3bf43f7 100644 --- a/net/bridge/netfilter/ebt_ulog.c +++ b/net/bridge/netfilter/ebt_ulog.c @@ -70,8 +70,7 @@ static void ulog_send(unsigned int nlgroup) { ebt_ulog_buff_t *ub = &ulog_buffers[nlgroup]; - if (timer_pending(&ub->timer)) - del_timer(&ub->timer); + del_timer(&ub->timer); if (!ub->skb) return; @@ -319,8 +318,7 @@ static void __exit ebt_ulog_fini(void) xt_unregister_target(&ebt_ulog_tg_reg); for (i = 0; i < EBT_ULOG_MAXNLGROUPS; i++) { ub = &ulog_buffers[i]; - if (timer_pending(&ub->timer)) - del_timer(&ub->timer); + del_timer(&ub->timer); spin_lock_bh(&ub->lock); if (ub->skb) { kfree_skb(ub->skb); diff --git a/net/core/sock.c b/net/core/sock.c index 235fb89..f1e14e2 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2230,7 +2230,7 @@ EXPORT_SYMBOL(sk_reset_timer); void sk_stop_timer(struct sock *sk, struct timer_list* timer) { - if (timer_pending(timer) && del_timer(timer)) + if (del_timer(timer)) __sock_put(sk); } EXPORT_SYMBOL(sk_stop_timer); diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index b5ef3cb..7d168dc 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -88,10 +88,8 @@ static void ulog_send(unsigned int nlgroupnum) { ulog_buff_t *ub = &ulog_buffers[nlgroupnum]; - if (timer_pending(&ub->timer)) { - pr_debug("ulog_send: timer was pending, deleting\n"); - del_timer(&ub->timer); - } + pr_debug("ulog_send: timer is deleting\n"); + del_timer(&ub->timer); if (!ub->skb) { pr_debug("ulog_send: nothing to send\n"); @@ -426,10 +424,8 @@ static void __exit ulog_tg_exit(void) /* remove pending timers and free allocated skb's */ for (i = 0; i < ULOG_MAXNLGROUPS; i++) { ub = &ulog_buffers[i]; - if (timer_pending(&ub->timer)) { - pr_debug("timer was pending, deleting\n"); - del_timer(&ub->timer); - } + pr_debug("timer is deleting\n"); + del_timer(&ub->timer); if (ub->skb) { kfree_skb(ub->skb); diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index b833677..d07e3a6 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -2567,8 +2567,7 @@ bed: err); /* If watchdog is still activated, kill it! */ - if(timer_pending(&(self->watchdog))) - del_timer(&(self->watchdog)); + del_timer(&(self->watchdog)); IRDA_DEBUG(1, "%s(), ...waking up !\n", __func__); diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 30e764a..68e368a 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -796,8 +796,7 @@ static void ip_vs_conn_expire(unsigned long data) */ if (likely(atomic_read(&cp->refcnt) == 1)) { /* delete the timer if it is activated by other users */ - if (timer_pending(&cp->timer)) - del_timer(&cp->timer); + del_timer(&cp->timer); /* does anybody control me? */ if (cp->control) diff --git a/net/sctp/associola.c b/net/sctp/associola.c index b45ed1f..2f95f5a 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -434,8 +434,7 @@ void sctp_association_free(struct sctp_association *asoc) * on our state. */ for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i) { - if (timer_pending(&asoc->timers[i]) && - del_timer(&asoc->timers[i])) + if (del_timer(&asoc->timers[i])) sctp_association_put(asoc); } @@ -1497,7 +1496,7 @@ void sctp_assoc_rwnd_increase(struct sctp_association *asoc, unsigned int len) /* Stop the SACK timer. */ timer = &asoc->timers[SCTP_EVENT_TIMEOUT_SACK]; - if (timer_pending(timer) && del_timer(timer)) + if (del_timer(timer)) sctp_association_put(asoc); } } diff --git a/net/sctp/input.c b/net/sctp/input.c index 8bd3c27..965bbbb 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -468,8 +468,7 @@ void sctp_icmp_proto_unreachable(struct sock *sk, } else { struct net *net = sock_net(sk); - if (timer_pending(&t->proto_unreach_timer) && - del_timer(&t->proto_unreach_timer)) + if (del_timer(&t->proto_unreach_timer)) sctp_association_put(asoc); sctp_do_sm(net, SCTP_EVENT_T_OTHER, diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 9bcdbd0..01dca75 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -1700,10 +1700,8 @@ static void sctp_check_transmitted(struct sctp_outq *q, * address. */ if (!transport->flight_size) { - if (timer_pending(&transport->T3_rtx_timer) && - del_timer(&transport->T3_rtx_timer)) { + if (del_timer(&transport->T3_rtx_timer)) sctp_transport_put(transport); - } } else if (restart_timer) { if (!mod_timer(&transport->T3_rtx_timer, jiffies + transport->rto)) diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index c957775..8aab894 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -674,10 +674,8 @@ static void sctp_cmd_t3_rtx_timers_stop(sctp_cmd_seq_t *cmds, list_for_each_entry(t, &asoc->peer.transport_addr_list, transports) { - if (timer_pending(&t->T3_rtx_timer) && - del_timer(&t->T3_rtx_timer)) { + if (del_timer(&t->T3_rtx_timer)) sctp_transport_put(t); - } } } @@ -1517,7 +1515,7 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, case SCTP_CMD_TIMER_STOP: timer = &asoc->timers[cmd->obj.to]; - if (timer_pending(timer) && del_timer(timer)) + if (del_timer(timer)) sctp_association_put(asoc); break; diff --git a/net/sctp/transport.c b/net/sctp/transport.c index ca5331c..fafd2a4 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -151,13 +151,11 @@ void sctp_transport_free(struct sctp_transport *transport) * structure hang around in memory since we know * the tranport is going away. */ - if (timer_pending(&transport->T3_rtx_timer) && - del_timer(&transport->T3_rtx_timer)) + if (del_timer(&transport->T3_rtx_timer)) sctp_transport_put(transport); /* Delete the ICMP proto unreachable timer if it's active. */ - if (timer_pending(&transport->proto_unreach_timer) && - del_timer(&transport->proto_unreach_timer)) + if (del_timer(&transport->proto_unreach_timer)) sctp_association_put(transport->asoc); sctp_transport_put(transport); @@ -655,10 +653,9 @@ void sctp_transport_reset(struct sctp_transport *t) void sctp_transport_immediate_rtx(struct sctp_transport *t) { /* Stop pending T3_rtx_timer */ - if (timer_pending(&t->T3_rtx_timer)) { - (void)del_timer(&t->T3_rtx_timer); + if (del_timer(&t->T3_rtx_timer)) sctp_transport_put(t); - } + sctp_retransmit(&t->asoc->outqueue, t, SCTP_RTXR_T3_RTX); if (!timer_pending(&t->T3_rtx_timer)) { if (!mod_timer(&t->T3_rtx_timer, jiffies + t->rto)) -- cgit v0.10.2 From 56db1c5f41c2ed0300ca570fea279a7c189c18fb Mon Sep 17 00:00:00 2001 From: Jean Sacren Date: Sun, 3 Feb 2013 21:34:10 +0000 Subject: mcast: do not check 'rv' twice in a row With the loop, don't check 'rv' twice in a row. Without the loop, 'rv' doesn't even need to be checked. Make the comment more grammar-friendly. Signed-off-by: Jean Sacren Signed-off-by: David S. Miller diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 8460a1f..e5de4855 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -427,11 +427,9 @@ int ip6_mc_source(int add, int omode, struct sock *sk, rv = 1; /* > 0 for insert logic below if sl_count is 0 */ for (i=0; isl_count; i++) { rv = !ipv6_addr_equal(&psl->sl_addr[i], source); - if (rv == 0) - break; + if (rv == 0) /* There is an error in the address. */ + goto done; } - if (rv == 0) /* address already there is an error */ - goto done; for (j=psl->sl_count-1; j>=i; j--) psl->sl_addr[j+1] = psl->sl_addr[j]; psl->sl_addr[i] = *source; -- cgit v0.10.2 From 377d97393d93cca146937058986050a30857eec7 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Mon, 4 Feb 2013 03:01:20 +0000 Subject: net/mlx4_en: Fix error propagation for ethtool helper function Propagate return value of mlx4_en_ethtool_add_mac_rule_by_ipv4 in case of failure. Signed-off-by: Hadar Hen Zion Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 911d488..3e993d5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -732,6 +732,7 @@ static int add_ip_rule(struct mlx4_en_priv *priv, struct ethtool_rxnfc *cmd, struct list_head *list_h) { + int err; struct mlx4_spec_list *spec_l2 = NULL; struct mlx4_spec_list *spec_l3 = NULL; struct ethtool_usrip4_spec *l3_mask = &cmd->fs.m_u.usr_ip4_spec; @@ -740,14 +741,15 @@ static int add_ip_rule(struct mlx4_en_priv *priv, spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL); if (!spec_l2 || !spec_l3) { en_err(priv, "Fail to alloc ethtool rule.\n"); - kfree(spec_l2); - kfree(spec_l3); - return -ENOMEM; + err = -ENOMEM; + goto free_spec; } - mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, spec_l2, - cmd->fs.h_u. - usr_ip4_spec.ip4dst); + err = mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, spec_l2, + cmd->fs.h_u. + usr_ip4_spec.ip4dst); + if (err) + goto free_spec; spec_l3->id = MLX4_NET_TRANS_RULE_ID_IPV4; spec_l3->ipv4.src_ip = cmd->fs.h_u.usr_ip4_spec.ip4src; if (l3_mask->ip4src) @@ -758,12 +760,18 @@ static int add_ip_rule(struct mlx4_en_priv *priv, list_add_tail(&spec_l3->list, list_h); return 0; + +free_spec: + kfree(spec_l2); + kfree(spec_l3); + return err; } static int add_tcp_udp_rule(struct mlx4_en_priv *priv, struct ethtool_rxnfc *cmd, struct list_head *list_h, int proto) { + int err; struct mlx4_spec_list *spec_l2 = NULL; struct mlx4_spec_list *spec_l3 = NULL; struct mlx4_spec_list *spec_l4 = NULL; @@ -774,29 +782,31 @@ static int add_tcp_udp_rule(struct mlx4_en_priv *priv, spec_l4 = kzalloc(sizeof(*spec_l4), GFP_KERNEL); if (!spec_l2 || !spec_l3 || !spec_l4) { en_err(priv, "Fail to alloc ethtool rule.\n"); - kfree(spec_l2); - kfree(spec_l3); - kfree(spec_l4); - return -ENOMEM; + err = -ENOMEM; + goto free_spec; } spec_l3->id = MLX4_NET_TRANS_RULE_ID_IPV4; if (proto == TCP_V4_FLOW) { - mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, - spec_l2, - cmd->fs.h_u. - tcp_ip4_spec.ip4dst); + err = mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, + spec_l2, + cmd->fs.h_u. + tcp_ip4_spec.ip4dst); + if (err) + goto free_spec; spec_l4->id = MLX4_NET_TRANS_RULE_ID_TCP; spec_l3->ipv4.src_ip = cmd->fs.h_u.tcp_ip4_spec.ip4src; spec_l3->ipv4.dst_ip = cmd->fs.h_u.tcp_ip4_spec.ip4dst; spec_l4->tcp_udp.src_port = cmd->fs.h_u.tcp_ip4_spec.psrc; spec_l4->tcp_udp.dst_port = cmd->fs.h_u.tcp_ip4_spec.pdst; } else { - mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, - spec_l2, - cmd->fs.h_u. - udp_ip4_spec.ip4dst); + err = mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, + spec_l2, + cmd->fs.h_u. + udp_ip4_spec.ip4dst); + if (err) + goto free_spec; spec_l4->id = MLX4_NET_TRANS_RULE_ID_UDP; spec_l3->ipv4.src_ip = cmd->fs.h_u.udp_ip4_spec.ip4src; spec_l3->ipv4.dst_ip = cmd->fs.h_u.udp_ip4_spec.ip4dst; @@ -818,6 +828,12 @@ static int add_tcp_udp_rule(struct mlx4_en_priv *priv, list_add_tail(&spec_l4->list, list_h); return 0; + +free_spec: + kfree(spec_l2); + kfree(spec_l3); + kfree(spec_l4); + return err; } static int mlx4_en_ethtool_to_net_trans_rule(struct net_device *dev, -- cgit v0.10.2 From f9d96862cacd1177d76d82f70f88ac57cb05e6e0 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Mon, 4 Feb 2013 03:01:21 +0000 Subject: net/mlx4_en: Fix compilation error when CONFIG_INET isn't defined ip_eth_mc_map function can't be used when CONFIG_INET isn't defined. Fixed compilation error by adding CONFIG_INET define check before using the function. Signed-off-by: Hadar Hen Zion Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 3e993d5..f523f02 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -711,6 +711,7 @@ static int mlx4_en_ethtool_add_mac_rule_by_ipv4(struct mlx4_en_priv *priv, struct mlx4_spec_list *spec_l2, __be32 ipv4_dst) { +#ifdef CONFIG_INET __be64 be_mac = 0; unsigned char mac[ETH_ALEN]; @@ -726,6 +727,9 @@ static int mlx4_en_ethtool_add_mac_rule_by_ipv4(struct mlx4_en_priv *priv, } return mlx4_en_ethtool_add_mac_rule(cmd, rule_list_h, spec_l2, &mac[0]); +#else + return -EINVAL; +#endif } static int add_ip_rule(struct mlx4_en_priv *priv, -- cgit v0.10.2 From d90f889e9cc76daf3a6d91120bb158b16c4af444 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 1 Feb 2013 08:17:24 +0000 Subject: team: handle sending port list in the same way option list is sent Essentially do the same thing with port list as with option list. Multipart netlink message. Side effect is that port event message can send port which is not longer in team->port_list. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 70d5d6b..738f744 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1965,30 +1965,6 @@ static void team_nl_team_put(struct team *team) dev_put(team->dev); } -static int team_nl_send_generic(struct genl_info *info, struct team *team, - int (*fill_func)(struct sk_buff *skb, - struct genl_info *info, - int flags, struct team *team)) -{ - struct sk_buff *skb; - int err; - - skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!skb) - return -ENOMEM; - - err = fill_func(skb, info, NLM_F_ACK, team); - if (err < 0) - goto err_fill; - - err = genlmsg_unicast(genl_info_net(info), skb, info->snd_portid); - return err; - -err_fill: - nlmsg_free(skb); - return err; -} - typedef int team_nl_send_func_t(struct sk_buff *skb, struct team *team, u32 portid); @@ -2333,16 +2309,57 @@ team_put: return err; } -static int team_nl_fill_port_list_get(struct sk_buff *skb, - u32 portid, u32 seq, int flags, - struct team *team, - bool fillall) +static int team_nl_fill_one_port_get(struct sk_buff *skb, + struct team_port *port) +{ + struct nlattr *port_item; + + port_item = nla_nest_start(skb, TEAM_ATTR_ITEM_PORT); + if (!port_item) + goto nest_cancel; + if (nla_put_u32(skb, TEAM_ATTR_PORT_IFINDEX, port->dev->ifindex)) + goto nest_cancel; + if (port->changed) { + if (nla_put_flag(skb, TEAM_ATTR_PORT_CHANGED)) + goto nest_cancel; + port->changed = false; + } + if ((port->removed && + nla_put_flag(skb, TEAM_ATTR_PORT_REMOVED)) || + (port->state.linkup && + nla_put_flag(skb, TEAM_ATTR_PORT_LINKUP)) || + nla_put_u32(skb, TEAM_ATTR_PORT_SPEED, port->state.speed) || + nla_put_u8(skb, TEAM_ATTR_PORT_DUPLEX, port->state.duplex)) + goto nest_cancel; + nla_nest_end(skb, port_item); + return 0; + +nest_cancel: + nla_nest_cancel(skb, port_item); + return -EMSGSIZE; +} + +static int team_nl_send_port_list_get(struct team *team, u32 portid, u32 seq, + int flags, team_nl_send_func_t *send_func, + struct team_port *one_port) { struct nlattr *port_list; + struct nlmsghdr *nlh; void *hdr; struct team_port *port; + int err; + struct sk_buff *skb = NULL; + bool incomplete; + int i; - hdr = genlmsg_put(skb, portid, seq, &team_nl_family, flags, + port = list_first_entry(&team->port_list, struct team_port, list); + +start_again: + err = __send_and_alloc_skb(&skb, team, portid, send_func); + if (err) + return err; + + hdr = genlmsg_put(skb, portid, seq, &team_nl_family, flags | NLM_F_MULTI, TEAM_CMD_PORT_LIST_GET); if (!hdr) return -EMSGSIZE; @@ -2353,47 +2370,54 @@ static int team_nl_fill_port_list_get(struct sk_buff *skb, if (!port_list) goto nla_put_failure; - list_for_each_entry(port, &team->port_list, list) { - struct nlattr *port_item; + i = 0; + incomplete = false; - /* Include only changed ports if fill all mode is not on */ - if (!fillall && !port->changed) - continue; - port_item = nla_nest_start(skb, TEAM_ATTR_ITEM_PORT); - if (!port_item) - goto nla_put_failure; - if (nla_put_u32(skb, TEAM_ATTR_PORT_IFINDEX, port->dev->ifindex)) - goto nla_put_failure; - if (port->changed) { - if (nla_put_flag(skb, TEAM_ATTR_PORT_CHANGED)) - goto nla_put_failure; - port->changed = false; + /* If one port is selected, called wants to send port list containing + * only this port. Otherwise go through all listed ports and send all + */ + if (one_port) { + err = team_nl_fill_one_port_get(skb, one_port); + if (err) + goto errout; + } else { + list_for_each_entry(port, &team->port_list, list) { + err = team_nl_fill_one_port_get(skb, port); + if (err) { + if (err == -EMSGSIZE) { + if (!i) + goto errout; + incomplete = true; + break; + } + goto errout; + } + i++; } - if ((port->removed && - nla_put_flag(skb, TEAM_ATTR_PORT_REMOVED)) || - (port->state.linkup && - nla_put_flag(skb, TEAM_ATTR_PORT_LINKUP)) || - nla_put_u32(skb, TEAM_ATTR_PORT_SPEED, port->state.speed) || - nla_put_u8(skb, TEAM_ATTR_PORT_DUPLEX, port->state.duplex)) - goto nla_put_failure; - nla_nest_end(skb, port_item); } nla_nest_end(skb, port_list); - return genlmsg_end(skb, hdr); + genlmsg_end(skb, hdr); + if (incomplete) + goto start_again; + +send_done: + nlh = nlmsg_put(skb, portid, seq, NLMSG_DONE, 0, flags | NLM_F_MULTI); + if (!nlh) { + err = __send_and_alloc_skb(&skb, team, portid, send_func); + if (err) + goto errout; + goto send_done; + } + + return send_func(skb, team, portid); nla_put_failure: + err = -EMSGSIZE; +errout: genlmsg_cancel(skb, hdr); - return -EMSGSIZE; -} - -static int team_nl_fill_port_list_get_all(struct sk_buff *skb, - struct genl_info *info, int flags, - struct team *team) -{ - return team_nl_fill_port_list_get(skb, info->snd_portid, - info->snd_seq, NLM_F_ACK, - team, true); + nlmsg_free(skb); + return err; } static int team_nl_cmd_port_list_get(struct sk_buff *skb, @@ -2406,7 +2430,8 @@ static int team_nl_cmd_port_list_get(struct sk_buff *skb, if (!team) return -EINVAL; - err = team_nl_send_generic(info, team, team_nl_fill_port_list_get_all); + err = team_nl_send_port_list_get(team, info->snd_portid, info->snd_seq, + NLM_F_ACK, team_nl_send_unicast, NULL); team_nl_team_put(team); @@ -2457,27 +2482,11 @@ static int team_nl_send_event_options_get(struct team *team, sel_opt_inst_list); } -static int team_nl_send_event_port_list_get(struct team *team) +static int team_nl_send_event_port_get(struct team *team, + struct team_port *port) { - struct sk_buff *skb; - int err; - struct net *net = dev_net(team->dev); - - skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!skb) - return -ENOMEM; - - err = team_nl_fill_port_list_get(skb, 0, 0, 0, team, false); - if (err < 0) - goto err_fill; - - err = genlmsg_multicast_netns(net, skb, 0, team_change_event_mcgrp.id, - GFP_KERNEL); - return err; - -err_fill: - nlmsg_free(skb); - return err; + return team_nl_send_port_list_get(team, 0, 0, 0, team_nl_send_multicast, + port); } static int team_nl_init(void) @@ -2550,7 +2559,7 @@ static void __team_port_change_send(struct team_port *port, bool linkup) port->state.duplex = 0; send_event: - err = team_nl_send_event_port_list_get(port->team); + err = team_nl_send_event_port_get(port->team, port); if (err && err != -ESRCH) netdev_warn(port->team->dev, "Failed to send port change of device %s via netlink (err %d)\n", port->dev->name, err); -- cgit v0.10.2 From c3969d80a396bffd7f80ff57987b15793be67926 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 1 Feb 2013 08:17:25 +0000 Subject: team: move netlink event notifiers after team_port_leave() In team_port_del(), there is need to be do all the cleanup related things first and netlink event notifiers should be called after that. This fixes two problems: team carrier is now correctly set (port is removed from list first) mode can set option as changed in .port_leave op Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 738f744..694ccf6 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1131,10 +1131,6 @@ static int team_port_del(struct team *team, struct net_device *port_dev) return -ENOENT; } - __team_option_inst_mark_removed_port(team, port); - __team_options_change_check(team); - __team_option_inst_del_port(team, port); - __team_port_change_port_removed(port); team_port_disable(team, port); list_del_rcu(&port->list); netdev_rx_handler_unregister(port_dev); @@ -1143,6 +1139,12 @@ static int team_port_del(struct team *team, struct net_device *port_dev) vlan_vids_del_by_dev(port_dev, dev); dev_close(port_dev); team_port_leave(team, port); + + __team_option_inst_mark_removed_port(team, port); + __team_options_change_check(team); + __team_option_inst_del_port(team, port); + __team_port_change_port_removed(port); + team_port_set_orig_dev_addr(port); dev_set_mtu(port_dev, port->orig.mtu); synchronize_rcu(); -- cgit v0.10.2 From 675b8044e17cc6528363e8b0322be0243621cd9b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 1 Feb 2013 08:17:26 +0000 Subject: team: ab: set active port option as changed when port is leaving In case port is leaving the team, set the option "activeport" as changed so the change can be properly propagated to userspace Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team_mode_activebackup.c b/drivers/net/team/team_mode_activebackup.c index 6262b4d..40fd338 100644 --- a/drivers/net/team/team_mode_activebackup.c +++ b/drivers/net/team/team_mode_activebackup.c @@ -19,6 +19,7 @@ struct ab_priv { struct team_port __rcu *active_port; + struct team_option_inst_info *ap_opt_inst_info; }; static struct ab_priv *ab_priv(struct team *team) @@ -54,8 +55,17 @@ drop: static void ab_port_leave(struct team *team, struct team_port *port) { - if (ab_priv(team)->active_port == port) + if (ab_priv(team)->active_port == port) { RCU_INIT_POINTER(ab_priv(team)->active_port, NULL); + team_option_inst_set_change(ab_priv(team)->ap_opt_inst_info); + } +} + +static int ab_active_port_init(struct team *team, + struct team_option_inst_info *info) +{ + ab_priv(team)->ap_opt_inst_info = info; + return 0; } static int ab_active_port_get(struct team *team, struct team_gsetter_ctx *ctx) @@ -88,6 +98,7 @@ static const struct team_option ab_options[] = { { .name = "activeport", .type = TEAM_OPTION_TYPE_U32, + .init = ab_active_port_init, .getter = ab_active_port_get, .setter = ab_active_port_set, }, -- cgit v0.10.2 From 7d3e673f2ed6fce38bc400e376616441aa37bf5b Mon Sep 17 00:00:00 2001 From: Frank Li Date: Thu, 31 Jan 2013 22:56:26 +0000 Subject: net: fec: fix miss init spinlock BUG: spinlock bad magic on CPU#1, swapper/0/1 lock: 0xbfae0f8c, .magic: 00000000, .owner: /-1, .owner_cpu: 0 Backtrace: [<80011d54>] (dump_backtrace+0x0/0x10c) from [<804e7800>] (dump_stack+0x18/0x1c) r6:bfae0000 r5:bfae0f8c r4:00000000 r3:806c1310 [<804e77e8>] (dump_stack+0x0/0x1c) from [<804e9f20>] (spin_dump+0x80/0x94) [<804e9ea0>] (spin_dump+0x0/0x94) from [<804e9f60>] (spin_bug+0x2c/0x30) r5:805f6f8c r4:bfae0f8c [<804e9f34>] (spin_bug+0x0/0x30) from [<80257984>] (do_raw_spin_lock+0x170/0x1b0 ) r5:806b4950 r4:bfae0f8c [<80257814>] (do_raw_spin_lock+0x0/0x1b0) from [<804ed15c>] (_raw_spin_lock_irqs ave+0x18/0x20) [<804ed144>] (_raw_spin_lock_irqsave+0x0/0x20) from [<8033c694>] (fec_ptp_start_ cyclecounter+0x3c/0x120) r4:bfae0f8c r3:00000002 [<8033c658>] (fec_ptp_start_cyclecounter+0x0/0x120) from [<80339e08>] (fec_resta rt+0x56c/0x5f8) r8:00000000 r7:806e6f48 r6:00000112 r5:806b4950 r4:bfae0000 [<8033989c>] (fec_restart+0x0/0x5f8) from [<8033b9e4>] (fec_probe+0x508/0xa48) Signed-off-by: Frank Li Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 0287675..51215e1 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1609,6 +1609,7 @@ static int fec_enet_init(struct net_device *ndev) } spin_lock_init(&fep->hw_lock); + spin_lock_init(&fep->tmreg_lock); fep->netdev = ndev; -- cgit v0.10.2 From 27000929ef0f137b34ba219eb04b05e772eff2b1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Feb 2013 15:46:15 -0500 Subject: ipcomp: Mark as netns_ok. This module is namespace aware, netns_ok was just disabled by default for sanity. Signed-off-by: David S. Miller diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index 9a46dae..f01d1b1 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -163,6 +163,7 @@ static const struct net_protocol ipcomp4_protocol = { .handler = xfrm4_rcv, .err_handler = ipcomp4_err, .no_policy = 1, + .netns_ok = 1, }; static int __init ipcomp4_init(void) -- cgit v0.10.2 From 35612a229c3a66aad7577d7f25e7ebb5286faf2d Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 3 Feb 2013 01:24:07 +0000 Subject: netfilter: fix missing dependencies for NETFILTER_XT_MATCH_CONNLABEL It was possible to set NF_CONNTRACK=n and NF_CONNTRACK_LABELS=y via NETFILTER_XT_MATCH_CONNLABEL=y. warning: (NETFILTER_XT_MATCH_CONNLABEL) selects NF_CONNTRACK_LABELS which has unmet direct dependencies (NET && INET && NETFILTER && NF_CONNTRACK) Reported-by: Randy Dunlap Signed-off-by: Florian Westphal Acked-by: Randy Dunlap Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index eb2c8eb..d4dd702 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -860,6 +860,7 @@ config NETFILTER_XT_MATCH_CONNBYTES config NETFILTER_XT_MATCH_CONNLABEL tristate '"connlabel" match support' select NF_CONNTRACK_LABELS + depends on NF_CONNTRACK depends on NETFILTER_ADVANCED ---help--- This match allows you to test and assign userspace-defined labels names -- cgit v0.10.2 From d1beadd1cb649404bfa2c3d92f77dbcb15b712e5 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 28 Jan 2013 10:44:48 +0000 Subject: netfilter: xt_conntrack: Add flag to support aliases The patch adds the flag to denote the "state" alias as of the subset of the "conntrack" match. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/xt_conntrack.h b/include/uapi/linux/netfilter/xt_conntrack.h index e3c041d..e5bd308 100644 --- a/include/uapi/linux/netfilter/xt_conntrack.h +++ b/include/uapi/linux/netfilter/xt_conntrack.h @@ -31,6 +31,7 @@ enum { XT_CONNTRACK_REPLSRC_PORT = 1 << 10, XT_CONNTRACK_REPLDST_PORT = 1 << 11, XT_CONNTRACK_DIRECTION = 1 << 12, + XT_CONNTRACK_STATE_ALIAS = 1 << 13, }; struct xt_conntrack_mtinfo1 { -- cgit v0.10.2 From d52ed4379a8264bc9bc82c068448c424924f1fde Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 30 Jan 2013 20:20:39 +0100 Subject: netfilter: xt_CT: merge common code of revision 0 and 1 This patch merges the common code for revision 0 and 1. Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index bde009e..d69f1c7 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -20,12 +20,8 @@ #include #include -static unsigned int xt_ct_target_v0(struct sk_buff *skb, - const struct xt_action_param *par) +static inline int xt_ct_target(struct sk_buff *skb, struct nf_conn *ct) { - const struct xt_ct_target_info *info = par->targinfo; - struct nf_conn *ct = info->ct; - /* Previously seen (loopback)? Ignore. */ if (skb->nfct != NULL) return XT_CONTINUE; @@ -37,21 +33,22 @@ static unsigned int xt_ct_target_v0(struct sk_buff *skb, return XT_CONTINUE; } -static unsigned int xt_ct_target_v1(struct sk_buff *skb, +static unsigned int xt_ct_target_v0(struct sk_buff *skb, const struct xt_action_param *par) { - const struct xt_ct_target_info_v1 *info = par->targinfo; + const struct xt_ct_target_info *info = par->targinfo; struct nf_conn *ct = info->ct; - /* Previously seen (loopback)? Ignore. */ - if (skb->nfct != NULL) - return XT_CONTINUE; + return xt_ct_target(skb, ct); +} - atomic_inc(&ct->ct_general.use); - skb->nfct = &ct->ct_general; - skb->nfctinfo = IP_CT_NEW; +static unsigned int xt_ct_target_v1(struct sk_buff *skb, + const struct xt_action_param *par) +{ + const struct xt_ct_target_info_v1 *info = par->targinfo; + struct nf_conn *ct = info->ct; - return XT_CONTINUE; + return xt_ct_target(skb, ct); } static u8 xt_ct_find_proto(const struct xt_tgchk_param *par) @@ -104,67 +101,6 @@ xt_ct_set_helper(struct nf_conn *ct, const char *helper_name, return 0; } -static int xt_ct_tg_check_v0(const struct xt_tgchk_param *par) -{ - struct xt_ct_target_info *info = par->targinfo; - struct nf_conntrack_tuple t; - struct nf_conn *ct; - int ret = -EOPNOTSUPP; - - if (info->flags & ~XT_CT_NOTRACK) - return -EINVAL; - - if (info->flags & XT_CT_NOTRACK) { - ct = nf_ct_untracked_get(); - atomic_inc(&ct->ct_general.use); - goto out; - } - -#ifndef CONFIG_NF_CONNTRACK_ZONES - if (info->zone) - goto err1; -#endif - - ret = nf_ct_l3proto_try_module_get(par->family); - if (ret < 0) - goto err1; - - memset(&t, 0, sizeof(t)); - ct = nf_conntrack_alloc(par->net, info->zone, &t, &t, GFP_KERNEL); - ret = PTR_ERR(ct); - if (IS_ERR(ct)) - goto err2; - - ret = 0; - if ((info->ct_events || info->exp_events) && - !nf_ct_ecache_ext_add(ct, info->ct_events, info->exp_events, - GFP_KERNEL)) - goto err3; - - if (info->helper[0]) { - ret = xt_ct_set_helper(ct, info->helper, par); - if (ret < 0) - goto err3; - } - - __set_bit(IPS_TEMPLATE_BIT, &ct->status); - __set_bit(IPS_CONFIRMED_BIT, &ct->status); - - /* Overload tuple linked list to put us in template list. */ - hlist_nulls_add_head_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode, - &par->net->ct.tmpl); -out: - info->ct = ct; - return 0; - -err3: - nf_conntrack_free(ct); -err2: - nf_ct_l3proto_module_put(par->family); -err1: - return ret; -} - #ifdef CONFIG_NF_CONNTRACK_TIMEOUT static void __xt_ct_tg_timeout_put(struct ctnl_timeout *timeout) { @@ -242,9 +178,9 @@ out: #endif } -static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) +static int xt_ct_tg_check(const struct xt_tgchk_param *par, + struct xt_ct_target_info_v1 *info) { - struct xt_ct_target_info_v1 *info = par->targinfo; struct nf_conntrack_tuple t; struct nf_conn *ct; int ret = -EOPNOTSUPP; @@ -309,20 +245,31 @@ err1: return ret; } -static void xt_ct_tg_destroy_v0(const struct xt_tgdtor_param *par) +static int xt_ct_tg_check_v0(const struct xt_tgchk_param *par) { struct xt_ct_target_info *info = par->targinfo; - struct nf_conn *ct = info->ct; - struct nf_conn_help *help; + struct xt_ct_target_info_v1 info_v1 = { + .flags = info->flags, + .zone = info->zone, + .ct_events = info->ct_events, + .exp_events = info->exp_events, + }; + int ret; - if (!nf_ct_is_untracked(ct)) { - help = nfct_help(ct); - if (help) - module_put(help->helper->me); + memcpy(info_v1.helper, info->helper, sizeof(info->helper)); - nf_ct_l3proto_module_put(par->family); - } - nf_ct_put(info->ct); + ret = xt_ct_tg_check(par, &info_v1); + if (ret < 0) + return ret; + + info->ct = info_v1.ct; + + return ret; +} + +static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) +{ + return xt_ct_tg_check(par, par->targinfo); } static void xt_ct_destroy_timeout(struct nf_conn *ct) @@ -343,9 +290,9 @@ static void xt_ct_destroy_timeout(struct nf_conn *ct) #endif } -static void xt_ct_tg_destroy_v1(const struct xt_tgdtor_param *par) +static void xt_ct_tg_destroy(const struct xt_tgdtor_param *par, + struct xt_ct_target_info_v1 *info) { - struct xt_ct_target_info_v1 *info = par->targinfo; struct nf_conn *ct = info->ct; struct nf_conn_help *help; @@ -361,6 +308,26 @@ static void xt_ct_tg_destroy_v1(const struct xt_tgdtor_param *par) nf_ct_put(info->ct); } +static void xt_ct_tg_destroy_v0(const struct xt_tgdtor_param *par) +{ + struct xt_ct_target_info *info = par->targinfo; + struct xt_ct_target_info_v1 info_v1 = { + .flags = info->flags, + .zone = info->zone, + .ct_events = info->ct_events, + .exp_events = info->exp_events, + .ct = info->ct, + }; + memcpy(info_v1.helper, info->helper, sizeof(info->helper)); + + xt_ct_tg_destroy(par, &info_v1); +} + +static void xt_ct_tg_destroy_v1(const struct xt_tgdtor_param *par) +{ + xt_ct_tg_destroy(par, par->targinfo); +} + static struct xt_target xt_ct_tg_reg[] __read_mostly = { { .name = "CT", -- cgit v0.10.2 From 5474f57f7d686ac918355419cb71496f835aaf5d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 30 Jan 2013 20:24:22 +0100 Subject: netfilter: xt_CT: add alias flag This patch adds the alias flag to support full NOTRACK target aliasing. Based on initial patch from Jozsef Kadlecsik. Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/xt_CT.h b/include/uapi/linux/netfilter/xt_CT.h index a064b8a..5a688c1 100644 --- a/include/uapi/linux/netfilter/xt_CT.h +++ b/include/uapi/linux/netfilter/xt_CT.h @@ -3,7 +3,11 @@ #include -#define XT_CT_NOTRACK 0x1 +enum { + XT_CT_NOTRACK = 1 << 0, + XT_CT_NOTRACK_ALIAS = 1 << 1, + XT_CT_MASK = XT_CT_NOTRACK | XT_CT_NOTRACK_ALIAS, +}; struct xt_ct_target_info { __u16 flags; diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index d69f1c7..a60261c 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -185,9 +185,6 @@ static int xt_ct_tg_check(const struct xt_tgchk_param *par, struct nf_conn *ct; int ret = -EOPNOTSUPP; - if (info->flags & ~XT_CT_NOTRACK) - return -EINVAL; - if (info->flags & XT_CT_NOTRACK) { ct = nf_ct_untracked_get(); atomic_inc(&ct->ct_general.use); @@ -256,6 +253,9 @@ static int xt_ct_tg_check_v0(const struct xt_tgchk_param *par) }; int ret; + if (info->flags & ~XT_CT_NOTRACK) + return -EINVAL; + memcpy(info_v1.helper, info->helper, sizeof(info->helper)); ret = xt_ct_tg_check(par, &info_v1); @@ -269,6 +269,21 @@ static int xt_ct_tg_check_v0(const struct xt_tgchk_param *par) static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) { + struct xt_ct_target_info_v1 *info = par->targinfo; + + if (info->flags & ~XT_CT_NOTRACK) + return -EINVAL; + + return xt_ct_tg_check(par, par->targinfo); +} + +static int xt_ct_tg_check_v2(const struct xt_tgchk_param *par) +{ + struct xt_ct_target_info_v1 *info = par->targinfo; + + if (info->flags & ~XT_CT_MASK) + return -EINVAL; + return xt_ct_tg_check(par, par->targinfo); } @@ -350,6 +365,17 @@ static struct xt_target xt_ct_tg_reg[] __read_mostly = { .table = "raw", .me = THIS_MODULE, }, + { + .name = "CT", + .family = NFPROTO_UNSPEC, + .revision = 2, + .targetsize = sizeof(struct xt_ct_target_info_v1), + .checkentry = xt_ct_tg_check_v2, + .destroy = xt_ct_tg_destroy_v1, + .target = xt_ct_target_v1, + .table = "raw", + .me = THIS_MODULE, + }, }; static unsigned int -- cgit v0.10.2 From 7c1e7e99ab8fac65222cfc0a2cc35f3678086cfa Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 4 Feb 2013 09:49:42 +0000 Subject: gianfar: dont conditionally alloc Rx/Err irq structs Commit ee873fda3bec7c668407b837fc5519eb961fcd37 "gianfar: Pack struct gfar_priv_grp into three cachelines" causes the following null dereference at driver init on sbc8548: libphy: Freescale PowerQUICC MII Bus: probed Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc01d6a38 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01d6a38] gfar_parse_group+0x228/0x280 LR [c01d6a34] gfar_parse_group+0x224/0x280 Call Trace: [ef82dd60] [c01d6a34] gfar_parse_group+0x224/0x280 (unreliable) [ef82dd90] [c01d73a4] gfar_probe+0x284/0xfe0 The reason is that the commit also changed the allocation of the Rx and error handling irq structs to be skipped for !MQ_MG_MODE. In the !MQ_MG_MODE case, only the Tx irq struct is allocated. Digging further, we see that MQ_MG_MODE is set only if we find the OF compatible string "fsl,etsec2". A quick grep in the dts directory shows lots of boards that support Rx/Tx/Err, but without this specific compat string. And hence they go after the unallocated Rx/Error structs and cause the above oops. Hence such a change can not be deployed until all the dts files are updated and sufficiently deployed. Further, the optimization is of limited value, since the kmalloc'd struct in question has only a single unsigned int, and an (IFNAMSIZ + 6) sized string. Note that no changes to the freeing code are needed here, as it already did an unconditional free of Rx/Tx/Error gfar_irqinfo. Cc: Claudiu Manoil Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 19c54a0..75734bf 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -580,19 +580,11 @@ static int gfar_parse_group(struct device_node *np, u32 *queue_mask; int i; - if (priv->mode == MQ_MG_MODE) { - for (i = 0; i < GFAR_NUM_IRQS; i++) { - grp->irqinfo[i] = kzalloc(sizeof(struct gfar_irqinfo), - GFP_KERNEL); - if (!grp->irqinfo[i]) - return -ENOMEM; - } - } else { - grp->irqinfo[GFAR_TX] = kzalloc(sizeof(struct gfar_irqinfo), - GFP_KERNEL); - if (!grp->irqinfo[GFAR_TX]) + for (i = 0; i < GFAR_NUM_IRQS; i++) { + grp->irqinfo[i] = kzalloc(sizeof(struct gfar_irqinfo), + GFP_KERNEL); + if (!grp->irqinfo[i]) return -ENOMEM; - grp->irqinfo[GFAR_RX] = grp->irqinfo[GFAR_ER] = NULL; } grp->regs = of_iomap(np, 0); -- cgit v0.10.2 From 577ae39ddb037242964f5fe87fd50b0b89e3263b Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Mon, 4 Feb 2013 12:33:07 +0000 Subject: qlcnic: Updating copyright information. We recently refactored the driver source, this patch will take care of updating copyright date and adding it to newly added files. Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic index e7fb2c6..2ae3b64 100644 --- a/Documentation/networking/LICENSE.qlcnic +++ b/Documentation/networking/LICENSE.qlcnic @@ -1,4 +1,4 @@ -Copyright (c) 2009-2011 QLogic Corporation +Copyright (c) 2009-2013 QLogic Corporation QLogic Linux qlcnic NIC Driver You may modify and redistribute the device driver code under the diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 457ca8e..3a840e7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 65233c8..cdcbbb0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #include "qlcnic.h" #include #include diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 2b44eb1..b62017b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #ifndef __QLCNIC_83XX_HW_H #define __QLCNIC_83XX_HW_H diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 8163e5b..f647002 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #include "qlcnic.h" #include "qlcnic_hw.h" diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c index b3ef33a..b0c3de9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #include "qlcnic.h" #include "qlcnic_hw.h" diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 7372964..4a3bd64 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index f65fd7b..6320d55 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h index 74f7711..44197ca 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 4ee92b2..51716ab 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 9673e2b..ed52b9c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #ifndef __QLCNIC_HW_H #define __QLCNIC_HW_H diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index 10ad25d..d28336f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index d00f628..bb4311e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #include #include #include diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index fb0255a..d0aef32 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1,6 +1,6 @@ /* * QLogic qlcnic NIC Driver - * Copyright (c) 2009-2010 QLogic Corporation + * Copyright (c) 2009-2013 QLogic Corporation * * See LICENSE.qlcnic for copyright and licensing details. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c index 8dbc8e7..abbd22c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c @@ -1,3 +1,9 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ #include "qlcnic.h" #include "qlcnic_hdr.h" diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 5045063..987fb6f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -1,3 +1,10 @@ +/* + * QLogic qlcnic NIC Driver + * Copyright (c) 2009-2013 QLogic Corporation + * + * See LICENSE.qlcnic for copyright and licensing details. + */ + #include #include #include -- cgit v0.10.2 From c14b78e7decd0d1d5add6a4604feb8609fe920a9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 5 Feb 2013 01:50:26 +0100 Subject: netfilter: nfnetlink: add mutex per subsystem This patch replaces the global lock to one lock per subsystem. The per-subsystem lock avoids that processes operating with different subsystems are synchronized. Signed-off-by: Pablo Neira Ayuso diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 4966dde..ecbb8e4 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -34,8 +34,8 @@ extern int nfnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigne extern int nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error); extern int nfnetlink_unicast(struct sk_buff *skb, struct net *net, u_int32_t pid, int flags); -extern void nfnl_lock(void); -extern void nfnl_unlock(void); +extern void nfnl_lock(__u8 subsys_id); +extern void nfnl_unlock(__u8 subsys_id); #define MODULE_ALIAS_NFNL_SUBSYS(subsys) \ MODULE_ALIAS("nfnetlink-subsys-" __stringify(subsys)) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 6d6d8f2..f82b2e6 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -88,14 +88,14 @@ find_set_type(const char *name, u8 family, u8 revision) static bool load_settype(const char *name) { - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_IPSET); pr_debug("try to load ip_set_%s\n", name); if (request_module("ip_set_%s", name) < 0) { pr_warning("Can't find ip_set type %s\n", name); - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); return false; } - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); return true; } @@ -532,7 +532,7 @@ ip_set_nfnl_get(const char *name) ip_set_id_t i, index = IPSET_INVALID_ID; struct ip_set *s; - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); for (i = 0; i < ip_set_max; i++) { s = nfnl_set(i); if (s != NULL && STREQ(s->name, name)) { @@ -541,7 +541,7 @@ ip_set_nfnl_get(const char *name) break; } } - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_IPSET); return index; } @@ -561,13 +561,13 @@ ip_set_nfnl_get_byindex(ip_set_id_t index) if (index > ip_set_max) return IPSET_INVALID_ID; - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); set = nfnl_set(index); if (set) __ip_set_get(set); else index = IPSET_INVALID_ID; - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_IPSET); return index; } @@ -584,11 +584,11 @@ void ip_set_nfnl_put(ip_set_id_t index) { struct ip_set *set; - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); set = nfnl_set(index); if (set != NULL) __ip_set_put(set); - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_IPSET); } EXPORT_SYMBOL_GPL(ip_set_nfnl_put); @@ -1763,10 +1763,10 @@ ip_set_sockfn_get(struct sock *sk, int optval, void __user *user, int *len) goto done; } req_get->set.name[IPSET_MAXNAMELEN - 1] = '\0'; - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); find_set_and_id(req_get->set.name, &id); req_get->set.index = id; - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_IPSET); goto copy; } case IP_SET_OP_GET_BYINDEX: { @@ -1778,11 +1778,11 @@ ip_set_sockfn_get(struct sock *sk, int optval, void __user *user, int *len) ret = -EINVAL; goto done; } - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_IPSET); set = nfnl_set(req_get->set.index); strncpy(req_get->set.name, set ? set->name : "", IPSET_MAXNAMELEN); - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_IPSET); goto copy; } default: diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 2334cc5..d490a30 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1256,13 +1256,13 @@ ctnetlink_parse_nat_setup(struct nf_conn *ct, if (!parse_nat_setup) { #ifdef CONFIG_MODULES rcu_read_unlock(); - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_CTNETLINK); if (request_module("nf-nat") < 0) { - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_CTNETLINK); rcu_read_lock(); return -EOPNOTSUPP; } - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_CTNETLINK); rcu_read_lock(); if (nfnetlink_parse_nat_setup_hook) return -EAGAIN; @@ -1274,13 +1274,13 @@ ctnetlink_parse_nat_setup(struct nf_conn *ct, if (err == -EAGAIN) { #ifdef CONFIG_MODULES rcu_read_unlock(); - nfnl_unlock(); + nfnl_unlock(NFNL_SUBSYS_CTNETLINK); if (request_module("nf-nat-%u", nf_ct_l3num(ct)) < 0) { - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_CTNETLINK); rcu_read_lock(); return -EOPNOTSUPP; } - nfnl_lock(); + nfnl_lock(NFNL_SUBSYS_CTNETLINK); rcu_read_lock(); #else err = -EOPNOTSUPP; diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 58a09b7..d578ec2 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -36,8 +36,10 @@ MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_NETFILTER); static char __initdata nfversion[] = "0.30"; -static const struct nfnetlink_subsystem __rcu *subsys_table[NFNL_SUBSYS_COUNT]; -static DEFINE_MUTEX(nfnl_mutex); +static struct { + struct mutex mutex; + const struct nfnetlink_subsystem __rcu *subsys; +} table[NFNL_SUBSYS_COUNT]; static const int nfnl_group2type[NFNLGRP_MAX+1] = { [NFNLGRP_CONNTRACK_NEW] = NFNL_SUBSYS_CTNETLINK, @@ -48,27 +50,32 @@ static const int nfnl_group2type[NFNLGRP_MAX+1] = { [NFNLGRP_CONNTRACK_EXP_DESTROY] = NFNL_SUBSYS_CTNETLINK_EXP, }; -void nfnl_lock(void) +void nfnl_lock(__u8 subsys_id) { - mutex_lock(&nfnl_mutex); + mutex_lock(&table[subsys_id].mutex); } EXPORT_SYMBOL_GPL(nfnl_lock); -void nfnl_unlock(void) +void nfnl_unlock(__u8 subsys_id) { - mutex_unlock(&nfnl_mutex); + mutex_unlock(&table[subsys_id].mutex); } EXPORT_SYMBOL_GPL(nfnl_unlock); +static struct mutex *nfnl_get_lock(__u8 subsys_id) +{ + return &table[subsys_id].mutex; +} + int nfnetlink_subsys_register(const struct nfnetlink_subsystem *n) { - nfnl_lock(); - if (subsys_table[n->subsys_id]) { - nfnl_unlock(); + nfnl_lock(n->subsys_id); + if (table[n->subsys_id].subsys) { + nfnl_unlock(n->subsys_id); return -EBUSY; } - rcu_assign_pointer(subsys_table[n->subsys_id], n); - nfnl_unlock(); + rcu_assign_pointer(table[n->subsys_id].subsys, n); + nfnl_unlock(n->subsys_id); return 0; } @@ -76,9 +83,9 @@ EXPORT_SYMBOL_GPL(nfnetlink_subsys_register); int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n) { - nfnl_lock(); - subsys_table[n->subsys_id] = NULL; - nfnl_unlock(); + nfnl_lock(n->subsys_id); + table[n->subsys_id].subsys = NULL; + nfnl_unlock(n->subsys_id); synchronize_rcu(); return 0; } @@ -91,7 +98,7 @@ static inline const struct nfnetlink_subsystem *nfnetlink_get_subsys(u_int16_t t if (subsys_id >= NFNL_SUBSYS_COUNT) return NULL; - return rcu_dereference(subsys_table[subsys_id]); + return rcu_dereference(table[subsys_id].subsys); } static inline const struct nfnl_callback * @@ -175,6 +182,7 @@ replay: struct nlattr *cda[ss->cb[cb_id].attr_count + 1]; struct nlattr *attr = (void *)nlh + min_len; int attrlen = nlh->nlmsg_len - min_len; + __u8 subsys_id = NFNL_SUBSYS_ID(type); err = nla_parse(cda, ss->cb[cb_id].attr_count, attr, attrlen, ss->cb[cb_id].policy); @@ -189,10 +197,9 @@ replay: rcu_read_unlock(); } else { rcu_read_unlock(); - nfnl_lock(); - if (rcu_dereference_protected( - subsys_table[NFNL_SUBSYS_ID(type)], - lockdep_is_held(&nfnl_mutex)) != ss || + nfnl_lock(subsys_id); + if (rcu_dereference_protected(table[subsys_id].subsys, + lockdep_is_held(nfnl_get_lock(subsys_id))) != ss || nfnetlink_find_client(type, ss) != nc) err = -EAGAIN; else if (nc->call) @@ -200,7 +207,7 @@ replay: (const struct nlattr **)cda); else err = -EINVAL; - nfnl_unlock(); + nfnl_unlock(subsys_id); } if (err == -EAGAIN) goto replay; @@ -267,6 +274,11 @@ static struct pernet_operations nfnetlink_net_ops = { static int __init nfnetlink_init(void) { + int i; + + for (i=0; i Date: Wed, 7 Nov 2012 07:05:08 +0000 Subject: netfilter: nf_ct_pptp: Fix comment referring to incorrect RFC The header of this file cites to "RFFC2673" which is "Binary Labels in the Domain Name System". It should refer to "RFC 2637" which is "Point-to-Point Tunneling Protocol (PPTP)". This patch also corrects the typo RFFC. Signed-off-by: Reese Moore Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index cc7669e..e6678d2 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -14,7 +14,7 @@ * Limitations: * - We blindly assume that control connections are always * established in PNS->PAC direction. This is a violation - * of RFFC2673 + * of RFC 2637 * - We can only support one single call within each session * TODO: * - testing of incoming PPTP calls -- cgit v0.10.2 From f25701df2ef171894730534e5b557186d2bacf17 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:04 +0000 Subject: e1000e: cosmetic move of #defines and prototypes to the new 82571.h Move #defines and function prototypes specific to the 8257x family of devices (82571, 82572, 82573, 82574, 82583) to the new 82571.h header file (the convention for Intel wired ethernet drivers is to use the name of the first device in the family for related file and function names). These defines and function prototypes can be used by other files in the driver and moving them to the 8257x-family-specific file makes it clearer to which devices they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index cf86090..1db7e3d 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -44,21 +44,6 @@ #include "e1000.h" -#define ID_LED_RESERVED_F746 0xF746 -#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_OFF1_ON2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 -#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */ -#define E1000_BASE1000T_STATUS 10 -#define E1000_IDLE_ERROR_COUNT_MASK 0xFF -#define E1000_RECEIVE_ERROR_COUNTER 21 -#define E1000_RECEIVE_ERROR_MAX 0xFFFF - -#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ - static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h new file mode 100644 index 0000000..85cb1a3 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/82571.h @@ -0,0 +1,58 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_82571_H_ +#define _E1000E_82571_H_ + +#define ID_LED_RESERVED_F746 0xF746 +#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 +#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */ + +/* Intr Throttling - RW */ +#define E1000_EITR_82574(_n) (0x000E8 + (0x4 * (_n))) + +#define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAC_MASK_82574 0x01F00000 + +/* Manageability Operation Mode mask */ +#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 + +#define E1000_BASE1000T_STATUS 10 +#define E1000_IDLE_ERROR_COUNT_MASK 0xFF +#define E1000_RECEIVE_ERROR_COUNTER 21 +#define E1000_RECEIVE_ERROR_MAX 0xFFFF +bool e1000_check_phy_82574(struct e1000_hw *hw); +bool e1000e_get_laa_state_82571(struct e1000_hw *hw); +void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 615b900..b425544 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -606,8 +606,6 @@ #define NVM_ALT_MAC_ADDR_PTR 0x0037 #define NVM_CHECKSUM_REG 0x003F -#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ - #define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */ #define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 4b0bd9c..12c5d40 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -579,9 +579,6 @@ extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); -extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); -extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); - extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); @@ -703,7 +700,6 @@ extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); -extern bool e1000_check_phy_82574(struct e1000_hw *hw); extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); extern void e1000e_ptp_init(struct e1000_adapter *adapter); extern void e1000e_ptp_remove(struct e1000_adapter *adapter); diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index f32b19a..6f94437 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -54,12 +54,9 @@ enum e1e_registers { E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */ E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */ E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */ - E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */ E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */ E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ E1000_FEXTNVM7 = 0x000E4, /* Future Extended NVM 7 - RW */ - E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */ -#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2)) E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */ E1000_RCTL = 0x00100, /* Rx Control - RW */ E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */ @@ -1005,4 +1002,6 @@ struct e1000_hw { } dev_spec; }; +#include "82571.h" + #endif diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e0eb5dd..6fcf9e8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2024,7 +2024,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; /* Auto-Mask Other interrupts upon ICR read */ -#define E1000_EIAC_MASK_82574 0x01F00000 ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); ctrl_ext |= E1000_CTRL_EXT_EIAME; ew32(CTRL_EXT, ctrl_ext); -- cgit v0.10.2 From 21b5a6f8ff3cbcd7623187628320a4e7125120fb Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:09 +0000 Subject: e1000e: cosmetic move of #defines to the new 80003es2lan.h Move #defines specific to the ESB2/82563 family of devices to the new 80003es2lan.h header file. These defines can be used by other files in the driver and moving them to the 80003es2lan-family-specific file makes it clearer to which devices they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index a00457a..e099138 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -32,69 +32,6 @@ #include "e1000.h" -#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 -#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 -#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 -#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F - -#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 -#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 -#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 - -#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 -#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 -#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 - -#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C -#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 - -#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ -#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 - -#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 -#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 - -/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ -#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disab. */ -#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 -#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ -#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ -#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ - -/* PHY Specific Control Register 2 (Page 0, Register 26) */ -#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 - /* 1=Reverse Auto-Negotiation */ - -/* MAC Specific Control Register (Page 2, Register 21) */ -/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ -#define GG82563_MSCR_TX_CLK_MASK 0x0007 -#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 -#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 -#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 - -#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ - -/* DSP Distance Register (Page 5, Register 26) */ -#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M - 1 = 50-80M - 2 = 80-110M - 3 = 110-140M - 4 = >140M - */ - -/* Kumeran Mode Control Register (Page 193, Register 16) */ -#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 - -/* Max number of times Kumeran read/write should be validated */ -#define GG82563_MAX_KMRN_RETRY 0x5 - -/* Power Management Control Register (Page 193, Register 20) */ -#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 - /* 1=Enable SERDES Electrical Idle */ - -/* In-Band Control Register (Page 194, Register 18) */ -#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ - /* A table for the GG82563 cable length where the range is defined * with a lower bound at "index" and the upper bound at * "index + 5". diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.h b/drivers/net/ethernet/intel/e1000e/80003es2lan.h new file mode 100644 index 0000000..90d363b --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.h @@ -0,0 +1,95 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_80003ES2LAN_H_ +#define _E1000E_80003ES2LAN_H_ + +#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 +#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 +#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 +#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F + +#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 +#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 +#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 + +#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 +#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 +#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 + +#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C +#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 + +#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */ +#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 + +#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 +#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 + +/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ +#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */ +#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 +#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ +#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ +#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ + +/* PHY Specific Control Register 2 (Page 0, Register 26) */ +#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */ + +/* MAC Specific Control Register (Page 2, Register 21) */ +/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ +#define GG82563_MSCR_TX_CLK_MASK 0x0007 +#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 +#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 +#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 + +#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ + +/* DSP Distance Register (Page 5, Register 26) + * 0 = <50M + * 1 = 50-80M + * 2 = 80-100M + * 3 = 110-140M + * 4 = >140M + */ +#define GG82563_DSPD_CABLE_LENGTH 0x0007 + +/* Kumeran Mode Control Register (Page 193, Register 16) */ +#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 + +/* Max number of times Kumeran read/write should be validated */ +#define GG82563_MAX_KMRN_RETRY 0x5 + +/* Power Management Control Register (Page 193, Register 20) */ +/* 1=Enable SERDES Electrical Idle */ +#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 + +/* In-Band Control Register (Page 194, Register 18) */ +#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 6f94437..8a145f4 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -1003,5 +1003,6 @@ struct e1000_hw { }; #include "82571.h" +#include "80003es2lan.h" #endif -- cgit v0.10.2 From 1b41db37f40dc682ee5d6fb47b3af545c3eabd1f Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:14 +0000 Subject: e1000e: cosmetic move of #defines and prototypes to the new ich8lan.h Move #defines and function prototypes specific to the ICH/PCH family of devices (ICH8/82562, ICH8/82566, ICH8/82567, ICH9/82562, ICH9/82566, ICH9/82567, ICH10/82567, 82577, 82578, 82579, I217, I218) to the new ich8lan.h header file (the convention for Intel wired ethernet drivers is to use the name of the first device in the family for related file and function names). These defines and function prototypes can be used by other files in the driver and moving them to the ICH/PCH-family-specific file makes it clearer to which devices they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index b425544..fc3a4fe 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -749,38 +749,6 @@ /* BME1000 PHY Specific Control Register */ #define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */ -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_100_ENABLE 0x2000 -#define I82579_LPI_CTRL_1000_ENABLE 0x4000 -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 -#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 - -/* Extended Management Interface (EMI) Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ -#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ -#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ -#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ -#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ -#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ -#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ -#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ -#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ -#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ -#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ -#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ - -#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ -#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) - /* Bits... * 15-5: page * 4-0: register offset @@ -827,8 +795,4 @@ /* SerDes Control */ #define E1000_GEN_POLL_TIMEOUT 640 -/* FW Semaphore */ -#define E1000_FWSM_WLOCK_MAC_MASK 0x0380 -#define E1000_FWSM_WLOCK_MAC_SHIFT 7 - #endif /* _E1000_DEFINES_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 12c5d40..7a383cd 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -104,44 +104,6 @@ struct e1000_info; (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\ (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT))) -/* PHY Wakeup Registers and defines */ -#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17) -#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0) -#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) -#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) -#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) -#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2))) -#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2))) -#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2))) -#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2))) -#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1))) - -#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */ -#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */ -#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */ -#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */ -#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */ -#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */ -#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */ - -#define HV_STATS_PAGE 778 -#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */ -#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17) -#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */ -#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19) -#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */ -#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21) -#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */ -#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24) -#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */ -#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26) -#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */ -#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28) -#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */ -#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30) - -#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ - /* BM PHY Copper Specific Status */ #define BM_CS_STATUS 17 #define BM_CS_STATUS_LINK_UP 0x0400 @@ -156,9 +118,6 @@ struct e1000_info; #define HV_M_STATUS_SPEED_1000 0x0200 #define HV_M_STATUS_LINK_UP 0x0040 -#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ -#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 - /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -579,17 +538,6 @@ extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); -extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); -extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, - bool state); -extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); -extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); -extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw); -extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw); -extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); -extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); -extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); - extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw); extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw); @@ -700,7 +648,6 @@ extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); -extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); extern void e1000e_ptp_init(struct e1000_adapter *adapter); extern void e1000e_ptp_remove(struct e1000_adapter *adapter); diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 8a145f4..21a9cc3 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -200,10 +200,6 @@ enum e1e_registers { #define E1000_RA (E1000_RAL(0)) E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */ #define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8)) - E1000_SHRAL_PCH_LPT_BASE = 0x05408, -#define E1000_SHRAL_PCH_LPT(_n) (E1000_SHRAL_PCH_LPT_BASE + ((_n) * 8)) - E1000_SHRAH_PCH_LTP_BASE = 0x0540C, -#define E1000_SHRAH_PCH_LPT(_n) (E1000_SHRAH_PCH_LTP_BASE + ((_n) * 8)) E1000_SHRAL_BASE = 0x05438, /* Shared Receive Address Low - RW */ #define E1000_SHRAL(_n) (E1000_SHRAL_BASE + ((_n) * 8)) E1000_SHRAH_BASE = 0x0543C, /* Shared Receive Address High - RW */ @@ -215,6 +211,7 @@ enum e1e_registers { E1000_MRQC = 0x05818, /* Multiple Receive Control - RW */ E1000_MANC = 0x05820, /* Management Control - RW */ E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */ + E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */ E1000_HOST_IF = 0x08800, /* Host Interface */ E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */ @@ -233,9 +230,6 @@ enum e1e_registers { E1000_RSSRK_BASE = 0x05C80, /* RSS Random Key - RW */ #define E1000_RSSRK(_n) (E1000_RSSRK_BASE + ((_n) * 4)) E1000_FFLT_DBG = 0x05F04, /* Debug Register */ - E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */ -#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4)) -#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE E1000_HICR = 0x08F00, /* Host Interface Control */ E1000_SYSTIML = 0x0B600, /* System time register Low - RO */ E1000_SYSTIMH = 0x0B604, /* System time register High - RO */ @@ -272,10 +266,6 @@ enum e1e_registers { #define BM_WUC_HOST_WU_BIT (1 << 4) #define BM_WUC_ME_WU_BIT (1 << 5) -#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) -#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) -#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) - #define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 #define IGP01E1000_PHY_POLARITY_MASK 0x0078 @@ -1004,5 +994,6 @@ struct e1000_hw { #include "82571.h" #include "80003es2lan.h" +#include "ich8lan.h" #endif diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index a019b46..1e838b2 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -57,132 +57,6 @@ #include "e1000.h" -#define ICH_FLASH_GFPREG 0x0000 -#define ICH_FLASH_HSFSTS 0x0004 -#define ICH_FLASH_HSFCTL 0x0006 -#define ICH_FLASH_FADDR 0x0008 -#define ICH_FLASH_FDATA0 0x0010 -#define ICH_FLASH_PR0 0x0074 - -#define ICH_FLASH_READ_COMMAND_TIMEOUT 500 -#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 -#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000 -#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 - -#define ICH_CYCLE_READ 0 -#define ICH_CYCLE_WRITE 2 -#define ICH_CYCLE_ERASE 3 - -#define FLASH_GFPREG_BASE_MASK 0x1FFF -#define FLASH_SECTOR_ADDR_SHIFT 12 - -#define ICH_FLASH_SEG_SIZE_256 256 -#define ICH_FLASH_SEG_SIZE_4K 4096 -#define ICH_FLASH_SEG_SIZE_8K 8192 -#define ICH_FLASH_SEG_SIZE_64K 65536 - - -#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ -/* FW established a valid mode */ -#define E1000_ICH_FWSM_FW_VALID 0x00008000 - -#define E1000_ICH_MNG_IAMT_MODE 0x2 - -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_ICH_NVM_SIG_WORD 0x13 -#define E1000_ICH_NVM_SIG_MASK 0xC000 -#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 -#define E1000_ICH_NVM_SIG_VALUE 0x80 - -#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 - -#define E1000_FEXTNVM_SW_CONFIG 1 -#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ - -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 - -#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 - -#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL - -#define E1000_ICH_RAR_ENTRIES 7 -#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ -#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) -#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ -#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ - -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 -#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 -#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 - -#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ - -#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ - -/* SMBus Control Phy Register */ -#define CV_SMB_CTRL PHY_REG(769, 23) -#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 - -/* SMBus Address Phy Register */ -#define HV_SMB_ADDR PHY_REG(768, 26) -#define HV_SMB_ADDR_MASK 0x007F -#define HV_SMB_ADDR_PEC_EN 0x0200 -#define HV_SMB_ADDR_VALID 0x0080 -#define HV_SMB_ADDR_FREQ_MASK 0x1100 -#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 -#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 - -/* PHY Power Management Control */ -#define HV_PM_CTRL PHY_REG(770, 17) -#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 - -/* Intel Rapid Start Technology Support */ -#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) -#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 -#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) -#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 -#define I217_CGFREG PHY_REG(772, 29) -#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 -#define I217_MEMPWR PHY_REG(772, 26) -#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 - -/* Strapping Option Register - RO */ -#define E1000_STRAP 0x0000C -#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 -#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 -#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 -#define E1000_STRAP_SMT_FREQ_SHIFT 12 - -/* OEM Bits Phy Register */ -#define HV_OEM_BITS PHY_REG(768, 25) -#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ -#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ -#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ - -#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ -#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ - -/* KMRN Mode Control */ -#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) -#define HV_KMRN_MDIO_SLOW 0x0400 - -/* KMRN FIFO Control and Status */ -#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 - /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h new file mode 100644 index 0000000..b6d3174 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -0,0 +1,268 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_ICH8LAN_H_ +#define _E1000E_ICH8LAN_H_ + +#define ICH_FLASH_GFPREG 0x0000 +#define ICH_FLASH_HSFSTS 0x0004 +#define ICH_FLASH_HSFCTL 0x0006 +#define ICH_FLASH_FADDR 0x0008 +#define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_PR0 0x0074 + +/* Requires up to 10 seconds when MNG might be accessing part. */ +#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 + +#define ICH_CYCLE_READ 0 +#define ICH_CYCLE_WRITE 2 +#define ICH_CYCLE_ERASE 3 + +#define FLASH_GFPREG_BASE_MASK 0x1FFF +#define FLASH_SECTOR_ADDR_SHIFT 12 + +#define ICH_FLASH_SEG_SIZE_256 256 +#define ICH_FLASH_SEG_SIZE_4K 4096 +#define ICH_FLASH_SEG_SIZE_8K 8192 +#define ICH_FLASH_SEG_SIZE_64K 65536 + +#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ +/* FW established a valid mode */ +#define E1000_ICH_FWSM_FW_VALID 0x00008000 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 + +#define E1000_ICH_MNG_IAMT_MODE 0x2 + +#define E1000_FWSM_WLOCK_MAC_MASK 0x0380 +#define E1000_FWSM_WLOCK_MAC_SHIFT 7 + +/* Shared Receive Address Registers */ +#define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8)) +#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8)) + +#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_OFF1_ON2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_ICH_NVM_SIG_WORD 0x13 +#define E1000_ICH_NVM_SIG_MASK 0xC000 +#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 +#define E1000_ICH_NVM_SIG_VALUE 0x80 + +#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 + +#define E1000_FEXTNVM_SW_CONFIG 1 +#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* different on ICH8M */ + +#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 +#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 + +#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 + +#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL + +#define E1000_ICH_RAR_ENTRIES 7 +#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ +#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ + +#define PHY_PAGE_SHIFT 5 +#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ + ((reg) & MAX_PHY_REG_ADDRESS)) +#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ +#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ + +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 +#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 +#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 + +/* PHY Wakeup Registers and defines */ +#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17) +#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0) +#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) +#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) +#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) +#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2))) +#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2))) +#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2))) +#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2))) +#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1))) + +#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */ +#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */ +#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */ +#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */ +#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */ +#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */ +#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */ + +#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ +#define HV_MUX_DATA_CTRL PHY_REG(776, 16) +#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 +#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 +#define HV_STATS_PAGE 778 +/* Half-duplex collision counts */ +#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision */ +#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17) +#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. */ +#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19) +#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Collision */ +#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21) +#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision */ +#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24) +#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision */ +#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26) +#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */ +#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28) +#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Tx with no CRS */ +#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30) + +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + +/* SMBus Control Phy Register */ +#define CV_SMB_CTRL PHY_REG(769, 23) +#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 + +/* SMBus Address Phy Register */ +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_MASK 0x007F +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 +#define HV_SMB_ADDR_FREQ_MASK 0x1100 +#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 +#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 + +/* Strapping Option Register - RO */ +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 +#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 +#define E1000_STRAP_SMT_FREQ_SHIFT 12 + +/* OEM Bits Phy Register */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ + +/* KMRN Mode Control */ +#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) +#define HV_KMRN_MDIO_SLOW 0x0400 + +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + +/* PHY Power Management Control */ +#define HV_PM_CTRL PHY_REG(770, 17) +#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 + +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ + +/* PHY Low Power Idle Control */ +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_100_ENABLE 0x2000 +#define I82579_LPI_CTRL_1000_ENABLE 0x4000 +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 + +/* Extended Management Interface (EMI) Registers */ +#define I82579_EMI_ADDR 0x10 +#define I82579_EMI_DATA 0x11 +#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ +#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ +#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ +#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ +#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ +#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ +#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE */ +#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE */ +#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ +#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ +#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ +#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ + +#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ +#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ + +/* Intel Rapid Start Technology Support */ +#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) +#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 +#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) +#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 +#define I217_CGFREG PHY_REG(772, 29) +#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 +#define I217_MEMPWR PHY_REG(772, 26) +#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 + +/* Receive Address Initial CRC Calculation */ +#define E1000_PCH_RAICC(_n) (0x05F50 + ((_n) * 4)) + +/* Latency Tolerance Reporting */ +#define E1000_LTRV 0x000F8 +#define E1000_LTRV_SCALE_MAX 5 +#define E1000_LTRV_SCALE_FACTOR 5 +#define E1000_LTRV_REQ_SHIFT 15 +#define E1000_LTRV_NOSNOOP_SHIFT 16 +#define E1000_LTRV_SEND (1 << 30) + +/* Proprietary Latency Tolerance Reporting PCI Capability */ +#define E1000_PCI_LTR_CAP_LPT 0xA8 + +/* OBFF Control & Threshold Defines */ +#define E1000_SVCR_OFF_EN 0x00000001 +#define E1000_SVCR_OFF_MASKINT 0x00001000 +#define E1000_SVCR_OFF_TIMER_MASK 0xFFFF0000 +#define E1000_SVCR_OFF_TIMER_SHIFT 16 +#define E1000_SVT_OFF_HWM_MASK 0x0000001F + +void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); +void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, + bool state); +void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); +void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); +void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw); +void e1000_resume_workarounds_pchlan(struct e1000_hw *hw); +s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); +void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); +s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); +#endif /* _E1000E_ICH8LAN_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index ae656f1..851685d 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -91,10 +91,6 @@ static const u16 e1000_igp_2_cable_length_table[] = { /* BM PHY Copper Specific Control 1 */ #define BM_CS_CTRL1 16 -#define HV_MUX_DATA_CTRL PHY_REG(776, 16) -#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 -#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 - /** * e1000e_check_reset_block_generic - Check if PHY reset is blocked * @hw: pointer to the HW structure -- cgit v0.10.2 From bdfe2da6aefd3961aac5c0cef76a030479e22f51 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:19 +0000 Subject: e1000e: cosmetic move of function prototypes to the new mac.h Move prototypes for functions which are applicable to all/most devices supported by the driver and are specific to the MAC component of each device to the new mac.h header file. These function prototypes can be used by other files in the driver and moving them to the MAC-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 7a383cd..0ad4ff1 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -538,48 +538,11 @@ extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); -extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw); -extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); -extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw); -extern s32 e1000e_setup_led_generic(struct e1000_hw *hw); -extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw); -extern s32 e1000e_led_on_generic(struct e1000_hw *hw); -extern s32 e1000e_led_off_generic(struct e1000_hw *hw); -extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw); -extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); -extern void e1000_set_lan_id_single_port(struct e1000_hw *hw); -extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex); -extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex); -extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw); -extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw); -extern s32 e1000e_id_led_init_generic(struct e1000_hw *hw); -extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw); -extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw); extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw); extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); -extern s32 e1000e_setup_link_generic(struct e1000_hw *hw); -extern void e1000_clear_vfta_generic(struct e1000_hw *hw); -extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); -extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, - u8 *mc_addr_list, - u32 mc_addr_count); -extern void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); -extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw); -extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop); -extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw); extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); -extern void e1000e_config_collision_dist_generic(struct e1000_hw *hw); -extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw); -extern s32 e1000e_force_mac_fc(struct e1000_hw *hw); -extern s32 e1000e_blink_led_generic(struct e1000_hw *hw); -extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); -extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); -extern void e1000e_reset_adaptive(struct e1000_hw *hw); -extern void e1000e_update_adaptive(struct e1000_hw *hw); - extern s32 e1000e_setup_copper_link(struct e1000_hw *hw); extern s32 e1000e_get_phy_id(struct e1000_hw *hw); -extern void e1000e_put_hw_semaphore(struct e1000_hw *hw); extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw); extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 21a9cc3..0757f5b 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -763,6 +763,8 @@ struct e1000_host_mng_command_info { u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; }; +#include "mac.h" + /* Function pointers for the MAC. */ struct e1000_mac_operations { s32 (*id_led_init)(struct e1000_hw *); diff --git a/drivers/net/ethernet/intel/e1000e/mac.h b/drivers/net/ethernet/intel/e1000e/mac.h new file mode 100644 index 0000000..a61fee4 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/mac.h @@ -0,0 +1,74 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_MAC_H_ +#define _E1000E_MAC_H_ + +s32 e1000e_blink_led_generic(struct e1000_hw *hw); +s32 e1000e_check_for_copper_link(struct e1000_hw *hw); +s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); +s32 e1000e_check_for_serdes_link(struct e1000_hw *hw); +s32 e1000e_cleanup_led_generic(struct e1000_hw *hw); +s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw); +s32 e1000e_disable_pcie_master(struct e1000_hw *hw); +s32 e1000e_force_mac_fc(struct e1000_hw *hw); +s32 e1000e_get_auto_rd_done(struct e1000_hw *hw); +s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw); +void e1000_set_lan_id_single_port(struct e1000_hw *hw); +s32 e1000e_get_hw_semaphore(struct e1000_hw *hw); +s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +s32 e1000e_id_led_init_generic(struct e1000_hw *hw); +s32 e1000e_led_on_generic(struct e1000_hw *hw); +s32 e1000e_led_off_generic(struct e1000_hw *hw); +void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count); +s32 e1000e_set_fc_watermarks(struct e1000_hw *hw); +s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw); +s32 e1000e_setup_led_generic(struct e1000_hw *hw); +s32 e1000e_setup_link_generic(struct e1000_hw *hw); +s32 e1000e_validate_mdi_setting_generic(struct e1000_hw *hw); +s32 e1000e_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); + +void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw); +void e1000_clear_vfta_generic(struct e1000_hw *hw); +void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); +void e1000e_put_hw_semaphore(struct e1000_hw *hw); +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); +void e1000e_reset_adaptive(struct e1000_hw *hw); +void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop); +void e1000e_update_adaptive(struct e1000_hw *hw); +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); + +void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); +void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); +void e1000e_config_collision_dist_generic(struct e1000_hw *hw); + +#endif -- cgit v0.10.2 From 93b9f8bfd72818ddb540eb19333907989fb97043 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:25 +0000 Subject: e1000e: cosmetic move of #defines and function prototypes to the new phy.h Move #defines and function prototypes which are applicable to all/most devices supported by the driver and are specific to the PHY component of each device to the new phy.h header file. These function prototypes can be used by other files in the driver and moving them to the PHY-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 0ad4ff1..0573e15 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -95,29 +95,6 @@ struct e1000_info; #define DEFAULT_JUMBO 9234 -/* BM/HV Specific Registers */ -#define BM_PORT_CTRL_PAGE 769 - -#define PHY_UPPER_SHIFT 21 -#define BM_PHY_REG(page, reg) \ - (((reg) & MAX_PHY_REG_ADDRESS) |\ - (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\ - (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT))) - -/* BM PHY Copper Specific Status */ -#define BM_CS_STATUS 17 -#define BM_CS_STATUS_LINK_UP 0x0400 -#define BM_CS_STATUS_RESOLVED 0x0800 -#define BM_CS_STATUS_SPEED_MASK 0xC000 -#define BM_CS_STATUS_SPEED_1000 0x8000 - -/* 82577 Mobile Phy Status Register */ -#define HV_M_STATUS 26 -#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 -#define HV_M_STATUS_SPEED_MASK 0x0300 -#define HV_M_STATUS_SPEED_1000 0x0200 -#define HV_M_STATUS_LINK_UP 0x0040 - /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -538,79 +515,7 @@ extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); -extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw); -extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); -extern s32 e1000e_setup_copper_link(struct e1000_hw *hw); -extern s32 e1000e_get_phy_id(struct e1000_hw *hw); -extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw); -extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); -extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); -extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); -extern s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); -extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); -extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); -extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); -extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); -extern s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw); -extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw); -extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); -extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw); -extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id); -extern s32 e1000e_determine_phy_address(struct e1000_hw *hw); -extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, - u16 *phy_reg); -extern s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, - u16 *phy_reg); -extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); -extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); -extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success); -extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); -extern void e1000_power_up_phy_copper(struct e1000_hw *hw); -extern void e1000_power_down_phy_copper(struct e1000_hw *hw); -extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_check_downshift(struct e1000_hw *hw); -extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); -extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); -extern s32 e1000_check_polarity_82577(struct e1000_hw *hw); -extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw); -extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); -extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw); - -extern s32 e1000_check_polarity_m88(struct e1000_hw *hw); -extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw); -extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); -extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); -extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); extern void e1000e_ptp_init(struct e1000_adapter *adapter); extern void e1000e_ptp_remove(struct e1000_adapter *adapter); diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index c6c3e92..455e385 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1355,7 +1355,6 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1e_rphy(hw, PHY_REG(776, 18), &phy_reg); e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1); /* Enable loopback on the PHY */ -#define I82577_PHY_LBK_CTRL 19 e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001); break; default: diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 0757f5b..5779ac4 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -244,57 +244,6 @@ enum e1e_registers { E1000_RXUDP = 0x0B638, /* Timesync Rx UDP Port - RW */ }; -#define E1000_MAX_PHY_ADDR 4 - -/* IGP01E1000 Specific Registers */ -#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ -#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ -#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ -#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ -#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ -#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ -#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ -#define IGP_PAGE_SHIFT 5 -#define PHY_REG_MASK 0x1F - -#define BM_WUC_PAGE 800 -#define BM_WUC_ADDRESS_OPCODE 0x11 -#define BM_WUC_DATA_OPCODE 0x12 -#define BM_WUC_ENABLE_PAGE 769 -#define BM_WUC_ENABLE_REG 17 -#define BM_WUC_ENABLE_BIT (1 << 2) -#define BM_WUC_HOST_WU_BIT (1 << 4) -#define BM_WUC_ME_WU_BIT (1 << 5) - -#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 -#define IGP01E1000_PHY_POLARITY_MASK 0x0078 - -#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 -#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ - -#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 - -#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ -#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ -#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ - -#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 - -#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 -#define IGP01E1000_PSSR_MDIX 0x0800 -#define IGP01E1000_PSSR_SPEED_MASK 0xC000 -#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 - -#define IGP02E1000_PHY_CHANNEL_NUM 4 -#define IGP02E1000_PHY_AGC_A 0x11B1 -#define IGP02E1000_PHY_AGC_B 0x12B1 -#define IGP02E1000_PHY_AGC_C 0x14B1 -#define IGP02E1000_PHY_AGC_D 0x18B1 - -#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */ -#define IGP02E1000_AGC_LENGTH_MASK 0x7F -#define IGP02E1000_AGC_RANGE 15 - /* manage.c */ #define E1000_VFTA_ENTRY_SHIFT 5 #define E1000_VFTA_ENTRY_MASK 0x7F @@ -320,43 +269,6 @@ enum e1e_registers { /* nvm.c */ #define E1000_STM_OPCODE 0xDB00 -#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 -#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 -#define E1000_KMRNCTRLSTA_REN 0x00200000 -#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */ -#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ -#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ -#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ -#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ -#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ -#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 -#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002 -#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */ - -#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 -#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */ -#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */ -#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ - -/* IFE PHY Extended Status Control */ -#define IFE_PESC_POLARITY_REVERSED 0x0100 - -/* IFE PHY Special Control */ -#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 -#define IFE_PSC_FORCE_POLARITY 0x0020 - -/* IFE PHY Special Control and LED Control */ -#define IFE_PSCL_PROBE_MODE 0x0020 -#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ -#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ - -/* IFE PHY MDIX Control */ -#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ -#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */ - -#define E1000_CABLE_LENGTH_UNDEFINED 0xFF - #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 @@ -764,6 +676,7 @@ struct e1000_host_mng_command_info { }; #include "mac.h" +#include "phy.h" /* Function pointers for the MAC. */ struct e1000_mac_operations { diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 851685d..a5ff13b 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -53,44 +53,6 @@ static const u16 e1000_igp_2_cable_length_table[] = { #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ ARRAY_SIZE(e1000_igp_2_cable_length_table) -#define BM_PHY_REG_PAGE(offset) \ - ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF)) -#define BM_PHY_REG_NUM(offset) \ - ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\ - (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\ - ~MAX_PHY_REG_ADDRESS))) - -#define HV_INTC_FC_PAGE_START 768 -#define I82578_ADDR_REG 29 -#define I82577_ADDR_REG 16 -#define I82577_CFG_REG 22 -#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) -#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ -#define I82577_CTRL_REG 23 - -/* 82577 specific PHY registers */ -#define I82577_PHY_CTRL_2 18 -#define I82577_PHY_STATUS_2 26 -#define I82577_PHY_DIAG_STATUS 31 - -/* I82577 PHY Status 2 */ -#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 -#define I82577_PHY_STATUS2_MDIX 0x0800 -#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 -#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 - -/* I82577 PHY Control 2 */ -#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 -#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 -#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 - -/* I82577 PHY Diagnostics Status */ -#define I82577_DSTATUS_CABLE_LENGTH 0x03FC -#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 - -/* BM PHY Copper Specific Control 1 */ -#define BM_CS_CTRL1 16 - /** * e1000e_check_reset_block_generic - Check if PHY reset is blocked * @hw: pointer to the HW structure diff --git a/drivers/net/ethernet/intel/e1000e/phy.h b/drivers/net/ethernet/intel/e1000e/phy.h new file mode 100644 index 0000000..f4f71b9 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/phy.h @@ -0,0 +1,242 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_PHY_H_ +#define _E1000E_PHY_H_ + +s32 e1000e_check_downshift(struct e1000_hw *hw); +s32 e1000_check_polarity_m88(struct e1000_hw *hw); +s32 e1000_check_polarity_igp(struct e1000_hw *hw); +s32 e1000_check_polarity_ife(struct e1000_hw *hw); +s32 e1000e_check_reset_block_generic(struct e1000_hw *hw); +s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); +s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw); +s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); +s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +s32 e1000e_get_cable_length_m88(struct e1000_hw *hw); +s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); +s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw); +s32 e1000e_get_phy_id(struct e1000_hw *hw); +s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); +s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); +s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +s32 e1000e_phy_sw_reset(struct e1000_hw *hw); +void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); +s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); +s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); +s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); +s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000e_setup_copper_link(struct e1000_hw *hw); +s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw); +enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id); +s32 e1000e_determine_phy_address(struct e1000_hw *hw); +s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); +void e1000_power_up_phy_copper(struct e1000_hw *hw); +void e1000_power_down_phy_copper(struct e1000_hw *hw); +s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); +s32 e1000_check_polarity_82577(struct e1000_hw *hw); +s32 e1000_get_phy_info_82577(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); +s32 e1000_get_cable_length_82577(struct e1000_hw *hw); + +#define E1000_MAX_PHY_ADDR 8 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ +#define IGP_PAGE_SHIFT 5 +#define PHY_REG_MASK 0x1F + +/* BM/HV Specific Registers */ +#define BM_PORT_CTRL_PAGE 769 +#define BM_WUC_PAGE 800 +#define BM_WUC_ADDRESS_OPCODE 0x11 +#define BM_WUC_DATA_OPCODE 0x12 +#define BM_WUC_ENABLE_PAGE BM_PORT_CTRL_PAGE +#define BM_WUC_ENABLE_REG 17 +#define BM_WUC_ENABLE_BIT (1 << 2) +#define BM_WUC_HOST_WU_BIT (1 << 4) +#define BM_WUC_ME_WU_BIT (1 << 5) + +#define PHY_UPPER_SHIFT 21 +#define BM_PHY_REG(page, reg) \ + (((reg) & MAX_PHY_REG_ADDRESS) |\ + (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\ + (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT))) +#define BM_PHY_REG_PAGE(offset) \ + ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF)) +#define BM_PHY_REG_NUM(offset) \ + ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\ + (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\ + ~MAX_PHY_REG_ADDRESS))) + +#define HV_INTC_FC_PAGE_START 768 +#define I82578_ADDR_REG 29 +#define I82577_ADDR_REG 16 +#define I82577_CFG_REG 22 +#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) +#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift */ +#define I82577_CTRL_REG 23 + +/* 82577 specific PHY registers */ +#define I82577_PHY_CTRL_2 18 +#define I82577_PHY_LBK_CTRL 19 +#define I82577_PHY_STATUS_2 26 +#define I82577_PHY_DIAG_STATUS 31 + +/* I82577 PHY Status 2 */ +#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 +#define I82577_PHY_STATUS2_MDIX 0x0800 +#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 +#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 + +/* I82577 PHY Control 2 */ +#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 +#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 +#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 + +/* I82577 PHY Diagnostics Status */ +#define I82577_DSTATUS_CABLE_LENGTH 0x03FC +#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 + +/* BM PHY Copper Specific Control 1 */ +#define BM_CS_CTRL1 16 + +/* BM PHY Copper Specific Status */ +#define BM_CS_STATUS 17 +#define BM_CS_STATUS_LINK_UP 0x0400 +#define BM_CS_STATUS_RESOLVED 0x0800 +#define BM_CS_STATUS_SPEED_MASK 0xC000 +#define BM_CS_STATUS_SPEED_1000 0x8000 + +/* 82577 Mobile Phy Status Register */ +#define HV_M_STATUS 26 +#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 +#define HV_M_STATUS_SPEED_MASK 0x0300 +#define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_LINK_UP 0x0040 + +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 + +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ + +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 + +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ + +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 + +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0800 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 + +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course=15:13, Fine=12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 + +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF + +#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 +#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 +#define E1000_KMRNCTRLSTA_REN 0x00200000 +#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */ +#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ +#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ +#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ +#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 +#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002 /* enable K1 */ +#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */ + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Ctrl */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Ctrl */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ + +/* IFE PHY Extended Status Control */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 + +/* IFE PHY Special Control */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 +#define IFE_PSC_FORCE_POLARITY 0x0020 + +/* IFE PHY Special Control and LED Control */ +#define IFE_PSCL_PROBE_MODE 0x0020 +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +/* IFE PHY MDIX Control */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ + +#endif -- cgit v0.10.2 From d22631134d86b15689e6fea907aa97fffd88dbf6 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:30 +0000 Subject: e1000e: cosmetic move of #defines and function prototypes to the new nvm.h Move #defines and function prototypes which are applicable to all/most devices supported by the driver and are specific to the NVM component of each device to the new nvm.h header file. These #defines and function prototypes can be used by other files in the driver and moving them to the NVM-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 0573e15..00c2e84 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -510,12 +510,8 @@ extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_es2_info; -extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size); - extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); -extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); extern void e1000e_ptp_init(struct e1000_adapter *adapter); extern void e1000e_ptp_remove(struct e1000_adapter *adapter); @@ -544,15 +540,7 @@ static inline s32 e1e_wphy_locked(struct e1000_hw *hw, u32 offset, u16 data) return hw->phy.ops.write_reg_locked(hw, offset, data); } -extern s32 e1000e_acquire_nvm(struct e1000_hw *hw); -extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw); -extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); -extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw); -extern void e1000e_release_nvm(struct e1000_hw *hw); extern void e1000e_reload_nvm_generic(struct e1000_hw *hw); -extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw) { diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 5779ac4..97b8746 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -266,9 +266,6 @@ enum e1e_registers { #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 #define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 -/* nvm.c */ -#define E1000_STM_OPCODE 0xDB00 - #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 @@ -677,6 +674,7 @@ struct e1000_host_mng_command_info { #include "mac.h" #include "phy.h" +#include "nvm.h" /* Function pointers for the MAC. */ struct e1000_mac_operations { diff --git a/drivers/net/ethernet/intel/e1000e/nvm.h b/drivers/net/ethernet/intel/e1000e/nvm.h new file mode 100644 index 0000000..45fc695 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/nvm.h @@ -0,0 +1,47 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_NVM_H_ +#define _E1000E_NVM_H_ + +s32 e1000e_acquire_nvm(struct e1000_hw *hw); + +s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); +s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw); +s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw); +void e1000e_release_nvm(struct e1000_hw *hw); + +#define E1000_STM_OPCODE 0xDB00 + +#endif -- cgit v0.10.2 From 948f97aca6700ea96647719185d83a0b7c312fc1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 22 Jan 2013 08:44:35 +0000 Subject: e1000e: cosmetic move of #defines and prototypes to the new manage.h Move #defines, function prototypes and data types which are applicable to all/most devices supported by the driver but are specific to the manageability component of each device to the new manage.h header file. These #defines, function prototypes and data types can be used by other files in the driver and moving them to the manageability-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 00c2e84..fcc7581 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -510,8 +510,6 @@ extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_es2_info; -extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); - extern void e1000e_ptp_init(struct e1000_adapter *adapter); extern void e1000e_ptp_remove(struct e1000_adapter *adapter); @@ -575,10 +573,6 @@ static inline s32 e1000_get_phy_info(struct e1000_hw *hw) return hw->phy.ops.get_info(hw); } -extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw); -extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw); -extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); - static inline u32 __er32(struct e1000_hw *hw, unsigned long reg) { return readl(hw->hw_addr + reg); diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 97b8746..de876bd 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -244,28 +244,6 @@ enum e1e_registers { E1000_RXUDP = 0x0B638, /* Timesync Rx UDP Port - RW */ }; -/* manage.c */ -#define E1000_VFTA_ENTRY_SHIFT 5 -#define E1000_VFTA_ENTRY_MASK 0x7F -#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F - -#define E1000_HICR_EN 0x01 /* Enable bit - RO */ -/* Driver sets this bit when done to put command in RAM */ -#define E1000_HICR_C 0x02 -#define E1000_HICR_FW_RESET_ENABLE 0x40 -#define E1000_HICR_FW_RESET 0x80 - -#define E1000_FWSM_MODE_MASK 0xE -#define E1000_FWSM_MODE_SHIFT 1 - -#define E1000_MNG_IAMT_MODE 0x3 -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 -#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 -#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 -#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 - #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 @@ -675,6 +653,7 @@ struct e1000_host_mng_command_info { #include "mac.h" #include "phy.h" #include "nvm.h" +#include "manage.h" /* Function pointers for the MAC. */ struct e1000_mac_operations { diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c index 4dae0db..e4b0f1e 100644 --- a/drivers/net/ethernet/intel/e1000e/manage.c +++ b/drivers/net/ethernet/intel/e1000e/manage.c @@ -28,19 +28,6 @@ #include "e1000.h" -enum e1000_mng_mode { - e1000_mng_mode_none = 0, - e1000_mng_mode_asf, - e1000_mng_mode_pt, - e1000_mng_mode_ipmi, - e1000_mng_mode_host_if_only -}; - -#define E1000_FACTPS_MNGCG 0x20000000 - -/* Intel(R) Active Management Technology signature */ -#define E1000_IAMT_SIGNATURE 0x544D4149 - /** * e1000_calculate_checksum - Calculate checksum for buffer * @buffer: pointer to EEPROM diff --git a/drivers/net/ethernet/intel/e1000e/manage.h b/drivers/net/ethernet/intel/e1000e/manage.h new file mode 100644 index 0000000..326897c --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/manage.h @@ -0,0 +1,72 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_MANAGE_H_ +#define _E1000E_MANAGE_H_ + +bool e1000e_check_mng_mode_generic(struct e1000_hw *hw); +bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw); +s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); +bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); + +enum e1000_mng_mode { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_if_only +}; + +#define E1000_FACTPS_MNGCG 0x20000000 + +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 + +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 + +#define E1000_VFTA_ENTRY_SHIFT 5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define E1000_HICR_C 0x02 +#define E1000_HICR_SV 0x04 /* Status Validity */ +#define E1000_HICR_FW_RESET_ENABLE 0x40 +#define E1000_HICR_FW_RESET 0x80 + +/* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 + +#endif -- cgit v0.10.2 From c556d6072d99c96bbc091ea64712cf71468ce533 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 5 Feb 2013 00:30:59 -0800 Subject: e1000e: convert enums of register offsets and move #defines to regs.h There are enough register offsets to warrant being in their own header file, and doing so logically separates them from other header file content. They have been converted from an enumerated data type to #defines as is done in all the other Intel wired ethernet drivers. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index de876bd..1e6b889 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -29,221 +29,11 @@ #ifndef _E1000_HW_H_ #define _E1000_HW_H_ +#include "regs.h" #include "defines.h" struct e1000_hw; -enum e1e_registers { - E1000_CTRL = 0x00000, /* Device Control - RW */ - E1000_STATUS = 0x00008, /* Device Status - RO */ - E1000_EECD = 0x00010, /* EEPROM/Flash Control - RW */ - E1000_EERD = 0x00014, /* EEPROM Read - RW */ - E1000_CTRL_EXT = 0x00018, /* Extended Device Control - RW */ - E1000_FLA = 0x0001C, /* Flash Access - RW */ - E1000_MDIC = 0x00020, /* MDI Control - RW */ - E1000_SCTL = 0x00024, /* SerDes Control - RW */ - E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */ - E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */ - E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */ - E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */ - E1000_FCT = 0x00030, /* Flow Control Type - RW */ - E1000_VET = 0x00038, /* VLAN Ether Type - RW */ - E1000_FEXTNVM3 = 0x0003C, /* Future Extended NVM 3 - RW */ - E1000_ICR = 0x000C0, /* Interrupt Cause Read - R/clr */ - E1000_ITR = 0x000C4, /* Interrupt Throttling Rate - RW */ - E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */ - E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */ - E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */ - E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */ - E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ - E1000_FEXTNVM7 = 0x000E4, /* Future Extended NVM 7 - RW */ - E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */ - E1000_RCTL = 0x00100, /* Rx Control - RW */ - E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */ - E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */ - E1000_RXCW = 0x00180, /* Rx Configuration Word - RO */ - E1000_TCTL = 0x00400, /* Tx Control - RW */ - E1000_TCTL_EXT = 0x00404, /* Extended Tx Control - RW */ - E1000_TIPG = 0x00410, /* Tx Inter-packet gap -RW */ - E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle -RW */ - E1000_LEDCTL = 0x00E00, /* LED Control - RW */ - E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */ - E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */ - E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */ -#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ - E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */ - E1000_PBS = 0x01008, /* Packet Buffer Size */ - E1000_PBECCSTS = 0x0100C, /* Packet Buffer ECC Status - RW */ - E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */ - E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */ - E1000_FLOP = 0x0103C, /* FLASH Opcode Register */ - E1000_PBA_ECC = 0x01100, /* PBA ECC Register */ - E1000_ERT = 0x02008, /* Early Rx Threshold - RW */ - E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */ - E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */ - E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */ -/* Convenience macros - * - * Note: "_n" is the queue number of the register to be written to. - * - * Example usage: - * E1000_RDBAL(current_rx_queue) - */ - E1000_RDBAL_BASE = 0x02800, /* Rx Descriptor Base Address Low - RW */ -#define E1000_RDBAL(_n) (E1000_RDBAL_BASE + (_n << 8)) - E1000_RDBAH_BASE = 0x02804, /* Rx Descriptor Base Address High - RW */ -#define E1000_RDBAH(_n) (E1000_RDBAH_BASE + (_n << 8)) - E1000_RDLEN_BASE = 0x02808, /* Rx Descriptor Length - RW */ -#define E1000_RDLEN(_n) (E1000_RDLEN_BASE + (_n << 8)) - E1000_RDH_BASE = 0x02810, /* Rx Descriptor Head - RW */ -#define E1000_RDH(_n) (E1000_RDH_BASE + (_n << 8)) - E1000_RDT_BASE = 0x02818, /* Rx Descriptor Tail - RW */ -#define E1000_RDT(_n) (E1000_RDT_BASE + (_n << 8)) - E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */ - E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */ -#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8)) - E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */ - - E1000_KABGTXD = 0x03004, /* AFE Band Gap Transmit Ref Data */ - E1000_TDBAL_BASE = 0x03800, /* Tx Descriptor Base Address Low - RW */ -#define E1000_TDBAL(_n) (E1000_TDBAL_BASE + (_n << 8)) - E1000_TDBAH_BASE = 0x03804, /* Tx Descriptor Base Address High - RW */ -#define E1000_TDBAH(_n) (E1000_TDBAH_BASE + (_n << 8)) - E1000_TDLEN_BASE = 0x03808, /* Tx Descriptor Length - RW */ -#define E1000_TDLEN(_n) (E1000_TDLEN_BASE + (_n << 8)) - E1000_TDH_BASE = 0x03810, /* Tx Descriptor Head - RW */ -#define E1000_TDH(_n) (E1000_TDH_BASE + (_n << 8)) - E1000_TDT_BASE = 0x03818, /* Tx Descriptor Tail - RW */ -#define E1000_TDT(_n) (E1000_TDT_BASE + (_n << 8)) - E1000_TIDV = 0x03820, /* Tx Interrupt Delay Value - RW */ - E1000_TXDCTL_BASE = 0x03828, /* Tx Descriptor Control - RW */ -#define E1000_TXDCTL(_n) (E1000_TXDCTL_BASE + (_n << 8)) - E1000_TADV = 0x0382C, /* Tx Interrupt Absolute Delay Val - RW */ - E1000_TARC_BASE = 0x03840, /* Tx Arbitration Count (0) */ -#define E1000_TARC(_n) (E1000_TARC_BASE + (_n << 8)) - E1000_CRCERRS = 0x04000, /* CRC Error Count - R/clr */ - E1000_ALGNERRC = 0x04004, /* Alignment Error Count - R/clr */ - E1000_SYMERRS = 0x04008, /* Symbol Error Count - R/clr */ - E1000_RXERRC = 0x0400C, /* Receive Error Count - R/clr */ - E1000_MPC = 0x04010, /* Missed Packet Count - R/clr */ - E1000_SCC = 0x04014, /* Single Collision Count - R/clr */ - E1000_ECOL = 0x04018, /* Excessive Collision Count - R/clr */ - E1000_MCC = 0x0401C, /* Multiple Collision Count - R/clr */ - E1000_LATECOL = 0x04020, /* Late Collision Count - R/clr */ - E1000_COLC = 0x04028, /* Collision Count - R/clr */ - E1000_DC = 0x04030, /* Defer Count - R/clr */ - E1000_TNCRS = 0x04034, /* Tx-No CRS - R/clr */ - E1000_SEC = 0x04038, /* Sequence Error Count - R/clr */ - E1000_CEXTERR = 0x0403C, /* Carrier Extension Error Count - R/clr */ - E1000_RLEC = 0x04040, /* Receive Length Error Count - R/clr */ - E1000_XONRXC = 0x04048, /* XON Rx Count - R/clr */ - E1000_XONTXC = 0x0404C, /* XON Tx Count - R/clr */ - E1000_XOFFRXC = 0x04050, /* XOFF Rx Count - R/clr */ - E1000_XOFFTXC = 0x04054, /* XOFF Tx Count - R/clr */ - E1000_FCRUC = 0x04058, /* Flow Control Rx Unsupported Count- R/clr */ - E1000_PRC64 = 0x0405C, /* Packets Rx (64 bytes) - R/clr */ - E1000_PRC127 = 0x04060, /* Packets Rx (65-127 bytes) - R/clr */ - E1000_PRC255 = 0x04064, /* Packets Rx (128-255 bytes) - R/clr */ - E1000_PRC511 = 0x04068, /* Packets Rx (255-511 bytes) - R/clr */ - E1000_PRC1023 = 0x0406C, /* Packets Rx (512-1023 bytes) - R/clr */ - E1000_PRC1522 = 0x04070, /* Packets Rx (1024-1522 bytes) - R/clr */ - E1000_GPRC = 0x04074, /* Good Packets Rx Count - R/clr */ - E1000_BPRC = 0x04078, /* Broadcast Packets Rx Count - R/clr */ - E1000_MPRC = 0x0407C, /* Multicast Packets Rx Count - R/clr */ - E1000_GPTC = 0x04080, /* Good Packets Tx Count - R/clr */ - E1000_GORCL = 0x04088, /* Good Octets Rx Count Low - R/clr */ - E1000_GORCH = 0x0408C, /* Good Octets Rx Count High - R/clr */ - E1000_GOTCL = 0x04090, /* Good Octets Tx Count Low - R/clr */ - E1000_GOTCH = 0x04094, /* Good Octets Tx Count High - R/clr */ - E1000_RNBC = 0x040A0, /* Rx No Buffers Count - R/clr */ - E1000_RUC = 0x040A4, /* Rx Undersize Count - R/clr */ - E1000_RFC = 0x040A8, /* Rx Fragment Count - R/clr */ - E1000_ROC = 0x040AC, /* Rx Oversize Count - R/clr */ - E1000_RJC = 0x040B0, /* Rx Jabber Count - R/clr */ - E1000_MGTPRC = 0x040B4, /* Management Packets Rx Count - R/clr */ - E1000_MGTPDC = 0x040B8, /* Management Packets Dropped Count - R/clr */ - E1000_MGTPTC = 0x040BC, /* Management Packets Tx Count - R/clr */ - E1000_TORL = 0x040C0, /* Total Octets Rx Low - R/clr */ - E1000_TORH = 0x040C4, /* Total Octets Rx High - R/clr */ - E1000_TOTL = 0x040C8, /* Total Octets Tx Low - R/clr */ - E1000_TOTH = 0x040CC, /* Total Octets Tx High - R/clr */ - E1000_TPR = 0x040D0, /* Total Packets Rx - R/clr */ - E1000_TPT = 0x040D4, /* Total Packets Tx - R/clr */ - E1000_PTC64 = 0x040D8, /* Packets Tx (64 bytes) - R/clr */ - E1000_PTC127 = 0x040DC, /* Packets Tx (65-127 bytes) - R/clr */ - E1000_PTC255 = 0x040E0, /* Packets Tx (128-255 bytes) - R/clr */ - E1000_PTC511 = 0x040E4, /* Packets Tx (256-511 bytes) - R/clr */ - E1000_PTC1023 = 0x040E8, /* Packets Tx (512-1023 bytes) - R/clr */ - E1000_PTC1522 = 0x040EC, /* Packets Tx (1024-1522 Bytes) - R/clr */ - E1000_MPTC = 0x040F0, /* Multicast Packets Tx Count - R/clr */ - E1000_BPTC = 0x040F4, /* Broadcast Packets Tx Count - R/clr */ - E1000_TSCTC = 0x040F8, /* TCP Segmentation Context Tx - R/clr */ - E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context Tx Fail - R/clr */ - E1000_IAC = 0x04100, /* Interrupt Assertion Count */ - E1000_ICRXPTC = 0x04104, /* Irq Cause Rx Packet Timer Expire Count */ - E1000_ICRXATC = 0x04108, /* Irq Cause Rx Abs Timer Expire Count */ - E1000_ICTXPTC = 0x0410C, /* Irq Cause Tx Packet Timer Expire Count */ - E1000_ICTXATC = 0x04110, /* Irq Cause Tx Abs Timer Expire Count */ - E1000_ICTXQEC = 0x04118, /* Irq Cause Tx Queue Empty Count */ - E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */ - E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ - E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ - E1000_PCS_LCTL = 0x04208, /* PCS Link Control - RW */ - E1000_PCS_LSTAT = 0x0420C, /* PCS Link Status - RO */ - E1000_PCS_ANADV = 0x04218, /* AN advertisement - RW */ - E1000_PCS_LPAB = 0x0421C, /* Link Partner Ability - RW */ - E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */ - E1000_RFCTL = 0x05008, /* Receive Filter Control */ - E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ - E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */ -#define E1000_RAL(_n) (E1000_RAL_BASE + ((_n) * 8)) -#define E1000_RA (E1000_RAL(0)) - E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */ -#define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8)) - E1000_SHRAL_BASE = 0x05438, /* Shared Receive Address Low - RW */ -#define E1000_SHRAL(_n) (E1000_SHRAL_BASE + ((_n) * 8)) - E1000_SHRAH_BASE = 0x0543C, /* Shared Receive Address High - RW */ -#define E1000_SHRAH(_n) (E1000_SHRAH_BASE + ((_n) * 8)) - E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */ - E1000_WUC = 0x05800, /* Wakeup Control - RW */ - E1000_WUFC = 0x05808, /* Wakeup Filter Control - RW */ - E1000_WUS = 0x05810, /* Wakeup Status - RO */ - E1000_MRQC = 0x05818, /* Multiple Receive Control - RW */ - E1000_MANC = 0x05820, /* Management Control - RW */ - E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */ - E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */ - E1000_HOST_IF = 0x08800, /* Host Interface */ - - E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */ - E1000_MANC2H = 0x05860, /* Management Control To Host - RW */ - E1000_MDEF_BASE = 0x05890, /* Management Decision Filters */ -#define E1000_MDEF(_n) (E1000_MDEF_BASE + ((_n) * 4)) - E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */ - E1000_GCR = 0x05B00, /* PCI-Ex Control */ - E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */ - E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ - E1000_SWSM = 0x05B50, /* SW Semaphore */ - E1000_FWSM = 0x05B54, /* FW Semaphore */ - E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */ - E1000_RETA_BASE = 0x05C00, /* Redirection Table - RW */ -#define E1000_RETA(_n) (E1000_RETA_BASE + ((_n) * 4)) - E1000_RSSRK_BASE = 0x05C80, /* RSS Random Key - RW */ -#define E1000_RSSRK(_n) (E1000_RSSRK_BASE + ((_n) * 4)) - E1000_FFLT_DBG = 0x05F04, /* Debug Register */ - E1000_HICR = 0x08F00, /* Host Interface Control */ - E1000_SYSTIML = 0x0B600, /* System time register Low - RO */ - E1000_SYSTIMH = 0x0B604, /* System time register High - RO */ - E1000_TIMINCA = 0x0B608, /* Increment attributes register - RW */ - E1000_TSYNCTXCTL = 0x0B614, /* Tx Time Sync Control register - RW */ - E1000_TXSTMPL = 0x0B618, /* Tx timestamp value Low - RO */ - E1000_TXSTMPH = 0x0B61C, /* Tx timestamp value High - RO */ - E1000_TSYNCRXCTL = 0x0B620, /* Rx Time Sync Control register - RW */ - E1000_RXSTMPL = 0x0B624, /* Rx timestamp Low - RO */ - E1000_RXSTMPH = 0x0B628, /* Rx timestamp High - RO */ - E1000_RXMTRL = 0x0B634, /* Timesync Rx EtherType and Msg Type - RW */ - E1000_RXUDP = 0x0B638, /* Timesync Rx UDP Port - RW */ -}; - #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6fcf9e8..382b031 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -86,18 +86,6 @@ struct e1000_reg_info { char *name; }; -#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ -#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ -#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ -#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ -#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ - -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ - static const struct e1000_reg_info e1000_reg_info_tbl[] = { /* General Registers */ diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h new file mode 100644 index 0000000..794fe14 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -0,0 +1,252 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_REGS_H_ +#define _E1000E_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ +#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ +#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */ +#define E1000_SVCR 0x000F0 +#define E1000_SVT 0x000F4 +#define E1000_LPIC 0x000FC /* Low Power IDLE control */ +#define E1000_RCTL 0x00100 /* Rx Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ +#define E1000_PBA_ECC 0x01100 /* PBA ECC Register */ +#define E1000_TCTL 0x00400 /* Tx Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ +#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_PBECCSTS 0x0100C /* Packet Buffer ECC Status - RW */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ +/* Split and Replication Rx Control - RW */ +#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ +#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ +/* Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) +#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) +#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ +#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_CRC_OFFSET 0x05F50 /* CRC Offset register */ + +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control */ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ + +#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +/* Management Decision Filters */ +#define E1000_MDEF(_n) (0x05890 + (4 * (_n))) +#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +/* Driver-only SW semaphore (not used by BOOT agents) */ +#define E1000_SWSM2 0x05B58 +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ + +/* RSS registers */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ +#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ +#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ +#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ +#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ +#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ +#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ +#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ +#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ +#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */ +#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */ + +#endif -- cgit v0.10.2 From a7a1d9da2980c2e86eba78d89a156f0b9d04ed4a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 24 Jan 2013 00:50:18 +0000 Subject: e1000e: cleanup checkpatch braces checks Resolve the following strict checkpatch checks: CHECK:BRACES: Blank lines aren't necessary after an open brace '{' CHECK:BRACES: Blank lines aren't necessary before a close brace '}' CHECK:BRACES: braces {} should be used on all arms of this statement Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 1db7e3d..2faffbd 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1534,7 +1534,6 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { - /* Receiver is synchronized with no invalid bits. */ switch (mac->serdes_link_state) { case e1000_serdes_link_autoneg_complete: diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 455e385..2c18137 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -130,7 +130,6 @@ static int e1000_get_settings(struct net_device *netdev, u32 speed; if (hw->phy.media_type == e1000_media_type_copper) { - ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | @@ -328,12 +327,12 @@ static int e1000_set_settings(struct net_device *netdev, } /* reset the link */ - if (netif_running(adapter->netdev)) { e1000e_down(adapter); e1000e_up(adapter); - } else + } else { e1000e_reset(adapter); + } clear_bit(__E1000_RESETTING, &adapter->state); return 0; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 1e838b2..dff7bff 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -3991,7 +3991,6 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) * The SMBus release must also be disabled on LCD reset. */ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - /* Enable proxy to reset only on power good. */ e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg); phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 382b031..3f7dbd1 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -87,7 +87,6 @@ struct e1000_reg_info { }; static const struct e1000_reg_info e1000_reg_info_tbl[] = { - /* General Registers */ {E1000_CTRL, "CTRL"}, {E1000_STATUS, "STATUS"}, @@ -6394,7 +6393,6 @@ static void e1000_io_resume(struct pci_dev *pdev) */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); - } static void e1000_print_device_info(struct e1000_adapter *adapter) diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index a5ff13b..0930c13 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2474,7 +2474,6 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { - /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); -- cgit v0.10.2 From 07ce870bed2f631ad53a2c1a90db20b5f8126ab9 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Wed, 19 Dec 2012 07:14:17 +0000 Subject: ixgbe: allow reading of SFF-8472 data over i2c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds functions needed for reading SFF-8472 diagnostic data from SFP modules. Based on original patch from Aurélien Guillaume CC: Aurélien Guillaume Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 7fd3833..6030de5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1003,15 +1003,16 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read + * @dev_addr: address to read from + * @byte_offset: byte offset to read from dev_addr * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's data over I2C interface. **/ -static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data) +static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, + u8 byte_offset, u8 *eeprom_data) { s32 status = 0; u16 sfp_addr = 0; @@ -1025,7 +1026,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, * 0xC30D. These registers are used to talk to the SFP+ * module's EEPROM through the SDA/SCL (I2C) interface. */ - sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (dev_addr << 8) + byte_offset; sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, @@ -1057,7 +1058,6 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, *eeprom_data = (u8)(sfp_data >> 8); } else { status = IXGBE_ERR_PHY; - goto out; } out: @@ -1065,6 +1065,36 @@ out: } /** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, + byte_offset, eeprom_data); +} + +/** + * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C + **/ +static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, + byte_offset, sff8472_data); +} + +/** * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type * @hw: pointer to hardware structure * @@ -1297,6 +1327,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .write_reg = &ixgbe_write_phy_reg_generic, .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, .check_overtemp = &ixgbe_tn_check_overtemp, }; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 3350461..d1f4d45 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -2241,6 +2241,7 @@ static struct ixgbe_phy_operations phy_ops_82599 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index f4b2c0d..d034cc5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1204,6 +1204,22 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** + * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's SFF-8472 data over I2C + **/ +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR2, + sff8472_data); +} + +/** * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface * @hw: pointer to hardware structure * @byte_offset: EEPROM byte offset to write diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 51b0a91..bbfe55c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -30,6 +30,7 @@ #include "ixgbe_type.h" #define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 +#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2 /* EEPROM byte offsets */ #define IXGBE_SFF_IDENTIFIER 0x0 @@ -41,6 +42,8 @@ #define IXGBE_SFF_10GBE_COMP_CODES 0x3 #define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C +#define IXGBE_SFF_SFF_8472_SWAP 0x5C +#define IXGBE_SFF_SFF_8472_COMP 0x5E /* Bitmasks */ #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 @@ -51,6 +54,7 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_I2C_EEPROM_READ_MASK 0x100 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 @@ -88,6 +92,9 @@ #define IXGBE_TN_LASI_STATUS_REG 0x9005 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 +/* SFP+ SFF-8472 Compliance code */ +#define IXGBE_SFF_SFF_8472_UNSUP 0x00 + s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); @@ -125,6 +132,8 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data); s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data); s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); #endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 0bdcc88..1af6289 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2874,6 +2874,7 @@ struct ixgbe_phy_operations { s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); + s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *); s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); s32 (*check_overtemp)(struct ixgbe_hw *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 2fa5843..4dc3725 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -878,6 +878,7 @@ static struct ixgbe_phy_operations phy_ops_X540 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, -- cgit v0.10.2 From f752be9c3de4fbb6a9b2c060f3794bd928a0ad7a Mon Sep 17 00:00:00 2001 From: Josh Hay Date: Fri, 4 Jan 2013 03:34:36 +0000 Subject: ixgbe: fix potential null dereference This patch adds a default case which goes to the next loop iteration in the case where p is not set, preventing p from being dereferenced. Signed-off-by: Josh Hay Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 216203e..bafd141 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1040,6 +1040,9 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev, p = (char *) adapter + ixgbe_gstrings_stats[i].stat_offset; break; + default: + data[i] = 0; + continue; } data[i] = (ixgbe_gstrings_stats[i].sizeof_stat == -- cgit v0.10.2 From d2c47b626ecdd0efa907355fc7eeb34236b3713a Mon Sep 17 00:00:00 2001 From: Josh Hay Date: Fri, 4 Jan 2013 03:34:42 +0000 Subject: ixgbe: fix return values and memcpy parameters to eliminate Smatch warnings This patch removes the rval variable returns from function and replaces them with direct returns in ixgbe_dcbnl_getnumtcs. It also changes how ixgbe_gstrings_test is copied into data with memcpy in ixgbe_get_strings because "*ixgbe_gstrings_test too small (32 vs 160)". Signed-off-by: Josh Hay Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index c261333..3735590 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -449,7 +449,6 @@ static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap) static int ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - u8 rval = 0; if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { switch (tcid) { @@ -460,14 +459,14 @@ static int ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) *num = adapter->dcb_cfg.num_tcs.pfc_tcs; break; default: - rval = -EINVAL; + return -EINVAL; break; } } else { - rval = -EINVAL; + return -EINVAL; } - return rval; + return 0; } static int ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index bafd141..355ca08 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1099,8 +1099,10 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, switch (stringset) { case ETH_SS_TEST: - memcpy(data, *ixgbe_gstrings_test, - IXGBE_TEST_LEN * ETH_GSTRING_LEN); + for (i = 0; i < IXGBE_TEST_LEN; i++) { + memcpy(data, ixgbe_gstrings_test[i], ETH_GSTRING_LEN); + data += ETH_GSTRING_LEN; + } break; case ETH_SS_STATS: for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { -- cgit v0.10.2 From 434c5e3954642b4e87841b13084f42d18b9984ad Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Tue, 8 Jan 2013 05:02:28 +0000 Subject: ixgbe: update date to 2013 Signed-off-by: Don Skidmore Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index 687c83d..be2989e 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 10 Gigabit PCI Express Linux driver -# Copyright(c) 1999 - 2012 Intel Corporation. +# Copyright(c) 1999 - 2013 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 8371ae4..2a61889 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 6030de5..d0113fc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index d1f4d45..203a00c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 5e68afd..99e472e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index f7a0970..bc3948ea 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c index 9bc17c0..1f2c805 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h index 1f4108e..1634de8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c index 87592b4..ac78077 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h index ba83570..3164f54 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c index 4eac80d..05e23b8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h index 4dec47f..a4ef076 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 3735590..f3d68f9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index 3504686..c5933f6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 355ca08..db67359 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 4968367..c116884 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h index bf724da..3a02759 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 8c74f73..9ffa330 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ac41361..88500dd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -66,7 +66,7 @@ static char ixgbe_default_device_descr[] = #define DRV_VERSION "3.11.33-k" const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = - "Copyright (c) 1999-2012 Intel Corporation."; + "Copyright (c) 1999-2013 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c index 1f3e32b..d4a64e6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h index 42dd65e..e44ff47 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index d034cc5..eb534a0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index bbfe55c..886a343 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 53d2047..331987d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index ee3507f..d44b4d2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index 008f9ce..4713f9f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c index 16ddf14..d118def 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 1af6289..6652e96 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 4dc3725..66c5e94 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, -- cgit v0.10.2 From 7e63bf490151f7e457002fc046601bb6bb541fa3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 8 Jan 2013 07:00:58 +0000 Subject: ixgbe: Replace rmb in Tx cleanup with read_barrier_depends The rmb in the Tx cleanup path is a much stronger barrier than we really need. All that is really needed is a read_barrier_depends since the location of the EOP descriptor is dependent on the eop_desc value. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 88500dd..ef9cb0a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -838,7 +838,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, break; /* prevent any other reads prior to eop_desc */ - rmb(); + read_barrier_depends(); /* if DD is not set pending work has not been completed */ if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) -- cgit v0.10.2 From c560451c2009b94820460e06d3f7c258f7234948 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 9 Jan 2013 08:50:42 +0000 Subject: ixgbe: Fix SR-IOV MTU warning This change corrects the fact that we were using 1522 to test for the max frame size in ixgbe_change_mtu and 1518 in ixgbe_set_vf_lpe. The difference was the addition of VLAN_HLEN which we only need to add in the case of computing a buffer size, but not a filter size. Signed-off-by: Alexander Duyck Tested-by: Sibai Li Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 2a61889..d268c7b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -92,8 +92,6 @@ */ #define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256 -#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) - /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ef9cb0a..396e280 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4869,7 +4869,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) */ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (adapter->hw.mac.type == ixgbe_mac_82599EB) && - (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) + (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); -- cgit v0.10.2 From aa5a1b8e68c95151fd249a3b5ec444c6b0aa2f1c Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 4 Feb 2013 14:12:41 -0800 Subject: mac80211: stop plink timer only on mesh interfaces Since mesh_plink_quiesce() would unconditionally delete the plink timer, and the timer initialization was recently moved into the mesh code path, suspending with a non-mesh interface now causes a crash. Fix this by only deleting the plink timer for mesh interfaces. Reported-by: Emmanuel Grumbach Tested-by: Emmanuel Grumbach Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index fe7c333..67524e7 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -592,6 +592,9 @@ static void mesh_plink_timer(unsigned long data) #ifdef CONFIG_PM void mesh_plink_quiesce(struct sta_info *sta) { + if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } -- cgit v0.10.2 From c9f7a8ab7792b48259af6e94706a5d02dd74caef Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 27 Jan 2013 21:53:55 +0200 Subject: iwlwifi: don't ack the card state notification This is not needed with MVM firmware. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 90473c2..d3d959d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -621,10 +621,6 @@ int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, (flags & CT_KILL_CARD_DISABLED) ? "Reached" : "Not reached"); - if (flags & CARD_DISABLED_MSK) - iwl_write32(mvm->trans, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - return 0; } -- cgit v0.10.2 From 2bfb50924c7e92362ac937aef2ab56bc7bd3ca52 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 21:43:48 +0100 Subject: iwlwifi: use threaded interrupt handler With new transports coming up, move to threaded interrupt handling now. This has the advantage that we can use the same locking scheme with all different transports we may need to implement. Note that the TX path obviously still runs in a tasklet, so some spin_lock() calls need to change to spin_lock_bh() calls to properly lock out the TX path. In my test on a Calpella platform this has no impact on throughput or latency. Also add lockdep annotations to avoid lockups due to catch sending synchronous commands or using locks that connect with them from the irq thread. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c index e8d5b90..a4eed20 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rx.c +++ b/drivers/net/wireless/iwlwifi/dvm/rx.c @@ -790,7 +790,7 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - ieee80211_rx(priv->hw, skb); + ieee80211_rx_ni(priv->hw, skb); } static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index ab76804..2d33760 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -77,7 +77,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv, IWL_DEBUG_INFO(priv, "Processing response for adding station %u\n", sta_id); - spin_lock(&priv->sta_lock); + spin_lock_bh(&priv->sta_lock); switch (add_sta_resp->status) { case ADD_STA_SUCCESS_MSK: @@ -119,7 +119,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv, priv->stations[sta_id].sta.mode == STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", addsta->sta.addr); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); return ret; } diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 7b0550d..4ece5ea 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1117,7 +1117,7 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> IWLAGN_TX_RES_RA_POS; - spin_lock(&priv->sta_lock); + spin_lock_bh(&priv->sta_lock); if (is_agg) iwl_rx_reply_tx_agg(priv, tx_resp); @@ -1239,11 +1239,11 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, le16_to_cpu(tx_resp->seq_ctl)); iwl_check_abort_status(priv, tx_resp->frame_count, status); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); while (!skb_queue_empty(&skbs)) { skb = __skb_dequeue(&skbs); - ieee80211_tx_status(priv->hw, skb); + ieee80211_tx_status_ni(priv->hw, skb); } if (is_offchannel_skb) @@ -1290,12 +1290,12 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, tid = ba_resp->tid; agg = &priv->tid_data[sta_id][tid].agg; - spin_lock(&priv->sta_lock); + spin_lock_bh(&priv->sta_lock); if (unlikely(!agg->wait_for_ba)) { if (unlikely(ba_resp->bitmap)) IWL_ERR(priv, "Received BA when not expected\n"); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); return 0; } @@ -1309,7 +1309,7 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, IWL_DEBUG_TX_QUEUES(priv, "Bad queue mapping txq_id=%d, agg_txq[sta:%d,tid:%d]=%d\n", scd_flow, sta_id, tid, agg->txq_id); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); return 0; } @@ -1378,11 +1378,11 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, } } - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); while (!skb_queue_empty(&reclaimed_skbs)) { skb = __skb_dequeue(&reclaimed_skbs); - ieee80211_tx_status(priv->hw, skb); + ieee80211_tx_status_ni(priv->hw, skb); } return 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h index dc79258..4a68001 100644 --- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h +++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h @@ -113,13 +113,13 @@ struct iwl_cfg; * May sleep * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the * HCMD the this Rx responds to. - * Must be atomic and called with BH disabled. + * This callback may sleep, it is called from a threaded IRQ handler. * @queue_full: notifies that a HW queue is full. * Must be atomic and called with BH disabled. * @queue_not_full: notifies that a HW queue is not full any more. * Must be atomic and called with BH disabled. * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that - * the radio is killed. Must be atomic. + * the radio is killed. May sleep. * @free_skb: allows the transport layer to free skbs that haven't been * reclaimed by the op_mode. This can happen when the driver is freed and * there are Tx packets pending in the transport layer. @@ -130,8 +130,7 @@ struct iwl_cfg; * called with BH disabled. * @nic_config: configure NIC, called before firmware is started. * May sleep - * @wimax_active: invoked when WiMax becomes active. Must be atomic and called - * with BH disabled. + * @wimax_active: invoked when WiMax becomes active. May sleep */ struct iwl_op_mode_ops { struct iwl_op_mode *(*start)(struct iwl_trans *trans, @@ -178,6 +177,7 @@ static inline int iwl_op_mode_rx(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { + might_sleep(); return op_mode->ops->rx(op_mode, rxb, cmd); } @@ -196,6 +196,7 @@ static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, static inline void iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) { + might_sleep(); op_mode->ops->hw_rf_kill(op_mode, state); } @@ -223,6 +224,7 @@ static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) { + might_sleep(); op_mode->ops->wimax_active(op_mode); } diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 0a3d4df..8c7bec6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -65,6 +65,7 @@ #include #include /* for page_address */ +#include #include "iwl-debug.h" #include "iwl-config.h" @@ -526,6 +527,10 @@ struct iwl_trans { struct dentry *dbgfs_dir; +#ifdef CONFIG_LOCKDEP + struct lockdep_map sync_cmd_lockdep_map; +#endif + /* pointer to trans specific struct */ /*Ensure that this pointer will always be aligned to sizeof pointer */ char trans_specific[0] __aligned(sizeof(void *)); @@ -602,12 +607,22 @@ static inline int iwl_trans_d3_resume(struct iwl_trans *trans, } static inline int iwl_trans_send_cmd(struct iwl_trans *trans, - struct iwl_host_cmd *cmd) + struct iwl_host_cmd *cmd) { + int ret; + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); - return trans->ops->send_cmd(trans, cmd); + if (!(cmd->flags & CMD_ASYNC)) + lock_map_acquire_read(&trans->sync_cmd_lockdep_map); + + ret = trans->ops->send_cmd(trans, cmd); + + if (!(cmd->flags & CMD_ASYNC)) + lock_map_release(&trans->sync_cmd_lockdep_map); + + return ret; } static inline struct iwl_device_cmd * @@ -791,4 +806,14 @@ iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags) int __must_check iwl_pci_register_driver(void); void iwl_pci_unregister_driver(void); +static inline void trans_lockdep_init(struct iwl_trans *trans) +{ +#ifdef CONFIG_LOCKDEP + static struct lock_class_key __key; + + lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map", + &__key, 0); +#endif +} + #endif /* __iwl_trans_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 52da375..3f3ce91 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -121,7 +121,7 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - ieee80211_rx(mvm->hw, skb); + ieee80211_rx_ni(mvm->hw, skb); } /* diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index cada8ef..6b67ce3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -620,7 +620,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, seq_ctl = le16_to_cpu(hdr->seq_ctrl); } - ieee80211_tx_status(mvm->hw, skb); + ieee80211_tx_status_ni(mvm->hw, skb); } if (txq_id >= IWL_FIRST_AMPDU_QUEUE) { @@ -663,12 +663,12 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; - spin_lock(&mvmsta->lock); + spin_lock_bh(&mvmsta->lock); tid_data->next_reclaimed = next_reclaimed; IWL_DEBUG_TX_REPLY(mvm, "Next reclaimed packet:%d\n", next_reclaimed); iwl_mvm_check_ratid_empty(mvm, sta, tid); - spin_unlock(&mvmsta->lock); + spin_unlock_bh(&mvmsta->lock); } #ifdef CONFIG_PM_SLEEP @@ -832,7 +832,7 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, return 0; } - spin_lock(&mvmsta->lock); + spin_lock_bh(&mvmsta->lock); __skb_queue_head_init(&reclaimed_skbs); @@ -886,13 +886,13 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, } } - spin_unlock(&mvmsta->lock); + spin_unlock_bh(&mvmsta->lock); rcu_read_unlock(); while (!skb_queue_empty(&reclaimed_skbs)) { skb = __skb_dequeue(&reclaimed_skbs); - ieee80211_tx_status(mvm->hw, skb); + ieee80211_tx_status_ni(mvm->hw, skb); } return 0; diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 5f6bb4e..aa2a39a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -249,7 +249,6 @@ struct iwl_trans_pcie { int ict_index; u32 inta; bool use_ict; - struct tasklet_struct irq_tasklet; struct isr_statistics isr_stats; spinlock_t irq_lock; @@ -330,7 +329,7 @@ void iwl_trans_pcie_free(struct iwl_trans *trans); * RX ******************************************************/ int iwl_pcie_rx_init(struct iwl_trans *trans); -void iwl_pcie_tasklet(struct iwl_trans *trans); +irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id); int iwl_pcie_rx_stop(struct iwl_trans *trans); void iwl_pcie_rx_free(struct iwl_trans *trans); diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index a9ca1d3..b0ae06d 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -81,10 +81,10 @@ * 'processed' and 'read' driver indexes as well) * + A received packet is processed and handed to the kernel network stack, * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. + * + The Host/Firmware iwl->rxq is replenished at irq thread time from the + * rx_free list. If there are no allocated buffers in iwl->rxq->rx_free, + * the READ INDEX is not incremented and iwl->status(RX_STALLED) is set. + * If there were enough free buffers and RX_STALLED is set it is cleared. * * * Driver sequence: @@ -214,9 +214,9 @@ static void iwl_pcie_rxq_restock(struct iwl_trans *trans) /* * If the device isn't enabled - not need to try to add buffers... * This can happen when we stop the device and still have an interrupt - * pending. We stop the APM before we sync the interrupts / tasklets - * because we have to (see comment there). On the other hand, since - * the APM is stopped, we cannot access the HW (in particular not prph). + * pending. We stop the APM before we sync the interrupts because we + * have to (see comment there). On the other hand, since the APM is + * stopped, we cannot access the HW (in particular not prph). * So don't try to restock if the APM has been already stopped. */ if (!test_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status)) @@ -796,11 +796,14 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans) clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status); wake_up(&trans_pcie->wait_command_queue); + local_bh_disable(); iwl_op_mode_nic_error(trans->op_mode); + local_bh_enable(); } -void iwl_pcie_tasklet(struct iwl_trans *trans) +irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) { + struct iwl_trans *trans = dev_id; struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct isr_statistics *isr_stats = &trans_pcie->isr_stats; u32 inta = 0; @@ -811,6 +814,8 @@ void iwl_pcie_tasklet(struct iwl_trans *trans) u32 inta_mask; #endif + lock_map_acquire(&trans->sync_cmd_lockdep_map); + spin_lock_irqsave(&trans_pcie->irq_lock, flags); /* Ack/clear/reset pending uCode interrupts. @@ -855,7 +860,7 @@ void iwl_pcie_tasklet(struct iwl_trans *trans) handled |= CSR_INT_BIT_HW_ERR; - return; + goto out; } #ifdef CONFIG_IWLWIFI_DEBUG @@ -1005,6 +1010,10 @@ void iwl_pcie_tasklet(struct iwl_trans *trans) /* Re-enable RF_KILL if it occurred */ else if (handled & CSR_INT_BIT_RF_KILL) iwl_enable_rfkill_int(trans); + +out: + lock_map_release(&trans->sync_cmd_lockdep_map); + return IRQ_HANDLED; } /****************************************************************************** @@ -1127,7 +1136,7 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) /* Disable (but don't clear!) interrupts here to avoid * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. + * If we have something to service, the irq thread will re-enable ints. * If we *don't* have something, we'll re-enable before leaving here. */ inta_mask = iwl_read32(trans, CSR_INT_MASK); iwl_write32(trans, CSR_INT_MASK, 0x00000000); @@ -1167,9 +1176,9 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) #endif trans_pcie->inta |= inta; - /* iwl_pcie_tasklet() will service interrupts and re-enable them */ + /* the thread will service interrupts and re-enable them */ if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); + return IRQ_WAKE_THREAD; else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && !trans_pcie->inta) iwl_enable_interrupts(trans); @@ -1277,9 +1286,10 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data) trans_pcie->inta |= inta; /* iwl_pcie_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && + if (likely(inta)) { + spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); + return IRQ_WAKE_THREAD; + } else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && !trans_pcie->inta) { /* Allow interrupt if was disabled by this handler and * no tasklet was schedules, We should not enable interrupt, diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 56d4f72..17bedc5 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -760,7 +760,6 @@ void iwl_trans_pcie_free(struct iwl_trans *trans) struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); synchronize_irq(trans_pcie->pci_dev->irq); - tasklet_kill(&trans_pcie->irq_tasklet); iwl_pcie_tx_free(trans); iwl_pcie_rx_free(trans); @@ -1480,6 +1479,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans->ops = &trans_ops_pcie; trans->cfg = cfg; + trans_lockdep_init(trans); trans_pcie->trans = trans; spin_lock_init(&trans_pcie->irq_lock); spin_lock_init(&trans_pcie->reg_lock); @@ -1567,15 +1567,12 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans_pcie->inta_mask = CSR_INI_SET_MASK; - tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) - iwl_pcie_tasklet, (unsigned long)trans); - if (iwl_pcie_alloc_ict(trans)) goto out_free_cmd_pool; - err = request_irq(pdev->irq, iwl_pcie_isr_ict, - IRQF_SHARED, DRV_NAME, trans); - if (err) { + if (request_threaded_irq(pdev->irq, iwl_pcie_isr_ict, + iwl_pcie_irq_handler, + IRQF_SHARED, DRV_NAME, trans)) { IWL_ERR(trans, "Error allocating IRQ %d\n", pdev->irq); goto out_free_ict; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 041127a..8e9e321 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -926,7 +926,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, if (WARN_ON(txq_id == trans_pcie->cmd_queue)) return; - spin_lock(&txq->lock); + spin_lock_bh(&txq->lock); if (txq->q.read_ptr == tfd_num) goto out; @@ -970,7 +970,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, if (iwl_queue_space(&txq->q) > txq->q.low_mark) iwl_wake_queue(trans, txq); out: - spin_unlock(&txq->lock); + spin_unlock_bh(&txq->lock); } /* @@ -1371,7 +1371,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, return; } - spin_lock(&txq->lock); + spin_lock_bh(&txq->lock); cmd_index = get_cmd_index(&txq->q, index); cmd = txq->entries[cmd_index].cmd; @@ -1405,7 +1405,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, meta->flags = 0; - spin_unlock(&txq->lock); + spin_unlock_bh(&txq->lock); } #define HOST_COMPLETE_TIMEOUT (2 * HZ) -- cgit v0.10.2 From f8ccac0e44934ff9414b31cc3167a5c828afec73 Mon Sep 17 00:00:00 2001 From: Tom Parkin Date: Thu, 31 Jan 2013 23:43:00 +0000 Subject: l2tp: put tunnel socket release on a workqueue To allow l2tp_tunnel_delete to be called from an atomic context, place the tunnel socket release calls on a workqueue for asynchronous execution. Tunnel memory is eventually freed in the tunnel socket destructor. Signed-off-by: Tom Parkin Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 06389d5..73988c0 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -101,6 +101,7 @@ struct l2tp_skb_cb { static atomic_t l2tp_tunnel_count; static atomic_t l2tp_session_count; +static struct workqueue_struct *l2tp_wq; /* per-net private data for this module */ static unsigned int l2tp_net_id; @@ -122,7 +123,6 @@ static inline struct l2tp_net *l2tp_pernet(struct net *net) return net_generic(net, l2tp_net_id); } - /* Tunnel reference counts. Incremented per session that is added to * the tunnel. */ @@ -1277,6 +1277,7 @@ EXPORT_SYMBOL_GPL(l2tp_xmit_skb); static void l2tp_tunnel_destruct(struct sock *sk) { struct l2tp_tunnel *tunnel; + struct l2tp_net *pn; tunnel = sk->sk_user_data; if (tunnel == NULL) @@ -1284,9 +1285,8 @@ static void l2tp_tunnel_destruct(struct sock *sk) l2tp_info(tunnel, L2TP_MSG_CONTROL, "%s: closing...\n", tunnel->name); - /* Close all sessions */ - l2tp_tunnel_closeall(tunnel); + /* Disable udp encapsulation */ switch (tunnel->encap) { case L2TP_ENCAPTYPE_UDP: /* No longer an encapsulation socket. See net/ipv4/udp.c */ @@ -1298,17 +1298,23 @@ static void l2tp_tunnel_destruct(struct sock *sk) } /* Remove hooks into tunnel socket */ - tunnel->sock = NULL; sk->sk_destruct = tunnel->old_sk_destruct; sk->sk_user_data = NULL; + tunnel->sock = NULL; - /* Call the original destructor */ - if (sk->sk_destruct) - (*sk->sk_destruct)(sk); + /* Remove the tunnel struct from the tunnel list */ + pn = l2tp_pernet(tunnel->l2tp_net); + spin_lock_bh(&pn->l2tp_tunnel_list_lock); + list_del_rcu(&tunnel->list); + spin_unlock_bh(&pn->l2tp_tunnel_list_lock); + atomic_dec(&l2tp_tunnel_count); - /* We're finished with the socket */ + l2tp_tunnel_closeall(tunnel); l2tp_tunnel_dec_refcount(tunnel); + /* Call the original destructor */ + if (sk->sk_destruct) + (*sk->sk_destruct)(sk); end: return; } @@ -1382,20 +1388,41 @@ again: */ static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel) { - struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net); - BUG_ON(atomic_read(&tunnel->ref_count) != 0); BUG_ON(tunnel->sock != NULL); - l2tp_info(tunnel, L2TP_MSG_CONTROL, "%s: free...\n", tunnel->name); - - /* Remove from tunnel list */ - spin_lock_bh(&pn->l2tp_tunnel_list_lock); - list_del_rcu(&tunnel->list); kfree_rcu(tunnel, rcu); - spin_unlock_bh(&pn->l2tp_tunnel_list_lock); +} - atomic_dec(&l2tp_tunnel_count); +/* Workqueue tunnel deletion function */ +static void l2tp_tunnel_del_work(struct work_struct *work) +{ + struct l2tp_tunnel *tunnel = NULL; + struct socket *sock = NULL; + struct sock *sk = NULL; + + tunnel = container_of(work, struct l2tp_tunnel, del_work); + sk = l2tp_tunnel_sock_lookup(tunnel); + if (!sk) + return; + + sock = sk->sk_socket; + BUG_ON(!sock); + + /* Force the tunnel socket to close. This will eventually + * cause the tunnel to be deleted via the normal socket close + * mechanisms when userspace closes the tunnel socket. + */ + inet_shutdown(sock, 2); + + /* If the tunnel's socket was created by the kernel, + * close the socket here since the socket was not + * created by userspace. + */ + if (sock->file == NULL) + inet_release(sock); + + l2tp_tunnel_sock_put(sk); } /* Create a socket for the tunnel, if one isn't set up by @@ -1657,6 +1684,9 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 sk->sk_allocation = GFP_ATOMIC; + /* Init delete workqueue struct */ + INIT_WORK(&tunnel->del_work, l2tp_tunnel_del_work); + /* Add tunnel to our list */ INIT_LIST_HEAD(&tunnel->list); atomic_inc(&l2tp_tunnel_count); @@ -1688,33 +1718,7 @@ EXPORT_SYMBOL_GPL(l2tp_tunnel_create); */ int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel) { - int err = -EBADF; - struct socket *sock = NULL; - struct sock *sk = NULL; - - sk = l2tp_tunnel_sock_lookup(tunnel); - if (!sk) - goto out; - - sock = sk->sk_socket; - BUG_ON(!sock); - - /* Force the tunnel socket to close. This will eventually - * cause the tunnel to be deleted via the normal socket close - * mechanisms when userspace closes the tunnel socket. - */ - err = inet_shutdown(sock, 2); - - /* If the tunnel's socket was created by the kernel, - * close the socket here since the socket was not - * created by userspace. - */ - if (sock->file == NULL) - err = inet_release(sock); - - l2tp_tunnel_sock_put(sk); -out: - return err; + return (false == queue_work(l2tp_wq, &tunnel->del_work)); } EXPORT_SYMBOL_GPL(l2tp_tunnel_delete); @@ -1912,6 +1916,13 @@ static int __init l2tp_init(void) if (rc) goto out; + l2tp_wq = alloc_workqueue("l2tp", WQ_NON_REENTRANT | WQ_UNBOUND, 0); + if (!l2tp_wq) { + pr_err("alloc_workqueue failed\n"); + rc = -ENOMEM; + goto out; + } + pr_info("L2TP core driver, %s\n", L2TP_DRV_VERSION); out: @@ -1921,6 +1932,10 @@ out: static void __exit l2tp_exit(void) { unregister_pernet_device(&l2tp_net_ops); + if (l2tp_wq) { + destroy_workqueue(l2tp_wq); + l2tp_wq = NULL; + } } module_init(l2tp_init); diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h index e62204c..8eb8f1d 100644 --- a/net/l2tp/l2tp_core.h +++ b/net/l2tp/l2tp_core.h @@ -191,6 +191,8 @@ struct l2tp_tunnel { int fd; /* Parent fd, if tunnel socket * was created by userspace */ + struct work_struct del_work; + uint8_t priv[0]; /* private data */ }; -- cgit v0.10.2 From b6fdfdfab0c57d4a62359277c09258bc2f5a1550 Mon Sep 17 00:00:00 2001 From: Tom Parkin Date: Thu, 31 Jan 2013 23:43:01 +0000 Subject: l2tp: set netnsok flag for netlink messages The L2TP netlink code can run in namespaces. Set the netnsok flag in genl_family to true to reflect that fact. Signed-off-by: Tom Parkin Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c index bbba3a1..c1bab22 100644 --- a/net/l2tp/l2tp_netlink.c +++ b/net/l2tp/l2tp_netlink.c @@ -37,6 +37,7 @@ static struct genl_family l2tp_nl_family = { .version = L2TP_GENL_VERSION, .hdrsize = 0, .maxattr = L2TP_ATTR_MAX, + .netnsok = true, }; /* Accessed under genl lock */ -- cgit v0.10.2 From cbb95e0ca92869cc94a1c5e5ac58395afbbda26e Mon Sep 17 00:00:00 2001 From: Tom Parkin Date: Thu, 31 Jan 2013 23:43:02 +0000 Subject: l2tp: prevent tunnel creation on netns mismatch l2tp_tunnel_create is passed a pointer to the network namespace for the tunnel, along with an optional file descriptor for the tunnel which may be passed in from userspace via. netlink. In the case where the file descriptor is defined, ensure that the namespace associated with that socket matches the namespace explicitly passed to l2tp_tunnel_create. Signed-off-by: Tom Parkin Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 73988c0..60a498a 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1593,11 +1593,18 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 if (err < 0) goto err; } else { - err = -EBADF; sock = sockfd_lookup(fd, &err); if (!sock) { - pr_err("tunl %hu: sockfd_lookup(fd=%d) returned %d\n", + pr_err("tunl %u: sockfd_lookup(fd=%d) returned %d\n", tunnel_id, fd, err); + err = -EBADF; + goto err; + } + + /* Reject namespace mismatches */ + if (!net_eq(sock_net(sock->sk), net)) { + pr_err("tunl %u: netns mismatch\n", tunnel_id); + err = -EINVAL; goto err; } } -- cgit v0.10.2 From 167eb17e0b178549f5e19036b16b6d6e35856b67 Mon Sep 17 00:00:00 2001 From: Tom Parkin Date: Thu, 31 Jan 2013 23:43:03 +0000 Subject: l2tp: create tunnel sockets in the right namespace When creating unmanaged tunnel sockets we should honour the network namespace passed to l2tp_tunnel_create. Furthermore, unmanaged tunnel sockets should not hold a reference to the network namespace lest they accidentally keep alive a namespace which should otherwise have been released. Unmanaged tunnel sockets now drop their namespace reference via sk_change_net, and are released in a new pernet exit callback, l2tp_exit_net. Signed-off-by: Tom Parkin Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 60a498a..b6ba65f 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1409,18 +1409,18 @@ static void l2tp_tunnel_del_work(struct work_struct *work) sock = sk->sk_socket; BUG_ON(!sock); - /* Force the tunnel socket to close. This will eventually - * cause the tunnel to be deleted via the normal socket close - * mechanisms when userspace closes the tunnel socket. + /* If the tunnel socket was created directly by the kernel, use the + * sk_* API to release the socket now. Otherwise go through the + * inet_* layer to shut the socket down, and let userspace close it. + * In either case the tunnel resources are freed in the socket + * destructor when the tunnel socket goes away. */ - inet_shutdown(sock, 2); - - /* If the tunnel's socket was created by the kernel, - * close the socket here since the socket was not - * created by userspace. - */ - if (sock->file == NULL) - inet_release(sock); + if (sock->file == NULL) { + kernel_sock_shutdown(sock, SHUT_RDWR); + sk_release_kernel(sk); + } else { + inet_shutdown(sock, 2); + } l2tp_tunnel_sock_put(sk); } @@ -1428,29 +1428,37 @@ static void l2tp_tunnel_del_work(struct work_struct *work) /* Create a socket for the tunnel, if one isn't set up by * userspace. This is used for static tunnels where there is no * managing L2TP daemon. + * + * Since we don't want these sockets to keep a namespace alive by + * themselves, we drop the socket's namespace refcount after creation. + * These sockets are freed when the namespace exits using the pernet + * exit hook. */ -static int l2tp_tunnel_sock_create(u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct socket **sockp) +static int l2tp_tunnel_sock_create(struct net *net, + u32 tunnel_id, + u32 peer_tunnel_id, + struct l2tp_tunnel_cfg *cfg, + struct socket **sockp) { int err = -EINVAL; - struct sockaddr_in udp_addr; + struct socket *sock = NULL; + struct sockaddr_in udp_addr = {0}; + struct sockaddr_l2tpip ip_addr = {0}; #if IS_ENABLED(CONFIG_IPV6) - struct sockaddr_in6 udp6_addr; - struct sockaddr_l2tpip6 ip6_addr; + struct sockaddr_in6 udp6_addr = {0}; + struct sockaddr_l2tpip6 ip6_addr = {0}; #endif - struct sockaddr_l2tpip ip_addr; - struct socket *sock = NULL; switch (cfg->encap) { case L2TP_ENCAPTYPE_UDP: #if IS_ENABLED(CONFIG_IPV6) if (cfg->local_ip6 && cfg->peer_ip6) { - err = sock_create(AF_INET6, SOCK_DGRAM, 0, sockp); + err = sock_create_kern(AF_INET6, SOCK_DGRAM, 0, &sock); if (err < 0) goto out; - sock = *sockp; + sk_change_net(sock->sk, net); - memset(&udp6_addr, 0, sizeof(udp6_addr)); udp6_addr.sin6_family = AF_INET6; memcpy(&udp6_addr.sin6_addr, cfg->local_ip6, sizeof(udp6_addr.sin6_addr)); @@ -1472,13 +1480,12 @@ static int l2tp_tunnel_sock_create(u32 tunnel_id, u32 peer_tunnel_id, struct l2t } else #endif { - err = sock_create(AF_INET, SOCK_DGRAM, 0, sockp); + err = sock_create_kern(AF_INET, SOCK_DGRAM, 0, &sock); if (err < 0) goto out; - sock = *sockp; + sk_change_net(sock->sk, net); - memset(&udp_addr, 0, sizeof(udp_addr)); udp_addr.sin_family = AF_INET; udp_addr.sin_addr = cfg->local_ip; udp_addr.sin_port = htons(cfg->local_udp_port); @@ -1505,14 +1512,13 @@ static int l2tp_tunnel_sock_create(u32 tunnel_id, u32 peer_tunnel_id, struct l2t case L2TP_ENCAPTYPE_IP: #if IS_ENABLED(CONFIG_IPV6) if (cfg->local_ip6 && cfg->peer_ip6) { - err = sock_create(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP, - sockp); + err = sock_create_kern(AF_INET6, SOCK_DGRAM, + IPPROTO_L2TP, &sock); if (err < 0) goto out; - sock = *sockp; + sk_change_net(sock->sk, net); - memset(&ip6_addr, 0, sizeof(ip6_addr)); ip6_addr.l2tp_family = AF_INET6; memcpy(&ip6_addr.l2tp_addr, cfg->local_ip6, sizeof(ip6_addr.l2tp_addr)); @@ -1534,14 +1540,13 @@ static int l2tp_tunnel_sock_create(u32 tunnel_id, u32 peer_tunnel_id, struct l2t } else #endif { - err = sock_create(AF_INET, SOCK_DGRAM, IPPROTO_L2TP, - sockp); + err = sock_create_kern(AF_INET, SOCK_DGRAM, + IPPROTO_L2TP, &sock); if (err < 0) goto out; - sock = *sockp; + sk_change_net(sock->sk, net); - memset(&ip_addr, 0, sizeof(ip_addr)); ip_addr.l2tp_family = AF_INET; ip_addr.l2tp_addr = cfg->local_ip; ip_addr.l2tp_conn_id = tunnel_id; @@ -1565,8 +1570,10 @@ static int l2tp_tunnel_sock_create(u32 tunnel_id, u32 peer_tunnel_id, struct l2t } out: + *sockp = sock; if ((err < 0) && sock) { - sock_release(sock); + kernel_sock_shutdown(sock, SHUT_RDWR); + sk_release_kernel(sock->sk); *sockp = NULL; } @@ -1589,7 +1596,8 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 * kernel socket. */ if (fd < 0) { - err = l2tp_tunnel_sock_create(tunnel_id, peer_tunnel_id, cfg, &sock); + err = l2tp_tunnel_sock_create(net, tunnel_id, peer_tunnel_id, + cfg, &sock); if (err < 0) goto err; } else { @@ -1909,8 +1917,21 @@ static __net_init int l2tp_init_net(struct net *net) return 0; } +static __net_exit void l2tp_exit_net(struct net *net) +{ + struct l2tp_net *pn = l2tp_pernet(net); + struct l2tp_tunnel *tunnel = NULL; + + rcu_read_lock_bh(); + list_for_each_entry_rcu(tunnel, &pn->l2tp_tunnel_list, list) { + (void)l2tp_tunnel_delete(tunnel); + } + rcu_read_unlock_bh(); +} + static struct pernet_operations l2tp_net_ops = { .init = l2tp_init_net, + .exit = l2tp_exit_net, .id = &l2tp_net_id, .size = sizeof(struct l2tp_net), }; -- cgit v0.10.2 From 9d6ddb19905223828485d8c40deaec76e4dea3a5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 5 Feb 2013 14:36:02 -0500 Subject: l2tp: Make ipv4 protocol handler namespace aware. The infrastructure is already pretty much entirely there to allow this conversion. The tunnel and session lookups have per-namespace tables, and the ipv4 bind lookup includes the namespace in the lookup key. Set netns_ok in l2tp_ip_protocol. Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 61d8b75..f7ac8f4 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -115,6 +115,7 @@ static inline struct sock *l2tp_ip_bind_lookup(struct net *net, __be32 laddr, in */ static int l2tp_ip_recv(struct sk_buff *skb) { + struct net *net = dev_net(skb->dev); struct sock *sk; u32 session_id; u32 tunnel_id; @@ -142,7 +143,7 @@ static int l2tp_ip_recv(struct sk_buff *skb) } /* Ok, this is a data packet. Lookup the session. */ - session = l2tp_session_find(&init_net, NULL, session_id); + session = l2tp_session_find(net, NULL, session_id); if (session == NULL) goto discard; @@ -173,14 +174,14 @@ pass_up: goto discard; tunnel_id = ntohl(*(__be32 *) &skb->data[4]); - tunnel = l2tp_tunnel_find(&init_net, tunnel_id); + tunnel = l2tp_tunnel_find(net, tunnel_id); if (tunnel != NULL) sk = tunnel->sock; else { struct iphdr *iph = (struct iphdr *) skb_network_header(skb); read_lock_bh(&l2tp_ip_lock); - sk = __l2tp_ip_bind_lookup(&init_net, iph->daddr, 0, tunnel_id); + sk = __l2tp_ip_bind_lookup(net, iph->daddr, 0, tunnel_id); read_unlock_bh(&l2tp_ip_lock); } @@ -239,6 +240,7 @@ static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct inet_sock *inet = inet_sk(sk); struct sockaddr_l2tpip *addr = (struct sockaddr_l2tpip *) uaddr; + struct net *net = sock_net(sk); int ret; int chk_addr_ret; @@ -251,7 +253,8 @@ static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) ret = -EADDRINUSE; read_lock_bh(&l2tp_ip_lock); - if (__l2tp_ip_bind_lookup(&init_net, addr->l2tp_addr.s_addr, sk->sk_bound_dev_if, addr->l2tp_conn_id)) + if (__l2tp_ip_bind_lookup(net, addr->l2tp_addr.s_addr, + sk->sk_bound_dev_if, addr->l2tp_conn_id)) goto out_in_use; read_unlock_bh(&l2tp_ip_lock); @@ -260,7 +263,7 @@ static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) if (sk->sk_state != TCP_CLOSE || addr_len < sizeof(struct sockaddr_l2tpip)) goto out; - chk_addr_ret = inet_addr_type(&init_net, addr->l2tp_addr.s_addr); + chk_addr_ret = inet_addr_type(net, addr->l2tp_addr.s_addr); ret = -EADDRNOTAVAIL; if (addr->l2tp_addr.s_addr && chk_addr_ret != RTN_LOCAL && chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) @@ -369,7 +372,7 @@ static int l2tp_ip_backlog_recv(struct sock *sk, struct sk_buff *skb) return 0; drop: - IP_INC_STATS(&init_net, IPSTATS_MIB_INDISCARDS); + IP_INC_STATS(sock_net(sk), IPSTATS_MIB_INDISCARDS); kfree_skb(skb); return -1; } @@ -605,6 +608,7 @@ static struct inet_protosw l2tp_ip_protosw = { static struct net_protocol l2tp_ip_protocol __read_mostly = { .handler = l2tp_ip_recv, + .netns_ok = 1, }; static int __init l2tp_ip_init(void) -- cgit v0.10.2 From 547472b8e1da72ae226430c0c4273e36fc8ca768 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 5 Feb 2013 14:42:23 -0500 Subject: ipv4: Disallow non-namespace aware protocols to register. All in-tree ipv4 protocol implementations are now namespace aware. Therefore all the run-time checks are superfluous. Reject registry of any non-namespace aware ipv4 protocol. Eventually we'll remove prot->netns_ok and this registry time check as well. Signed-off-by: David S. Miller diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 49ddca3..1aec92b 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -263,21 +263,6 @@ void build_ehash_secret(void) } EXPORT_SYMBOL(build_ehash_secret); -static inline int inet_netns_ok(struct net *net, __u8 protocol) -{ - const struct net_protocol *ipprot; - - if (net_eq(net, &init_net)) - return 1; - - ipprot = rcu_dereference(inet_protos[protocol]); - if (ipprot == NULL) { - /* raw IP is OK */ - return 1; - } - return ipprot->netns_ok; -} - /* * Create an inet socket. */ @@ -350,10 +335,6 @@ lookup_protocol: !ns_capable(net->user_ns, CAP_NET_RAW)) goto out_rcu_unlock; - err = -EAFNOSUPPORT; - if (!inet_netns_ok(net, protocol)) - goto out_rcu_unlock; - sock->ops = answer->ops; answer_prot = answer->prot; answer_no_check = answer->no_check; diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index f1395a6..87abd3e 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -208,13 +208,6 @@ static int ip_local_deliver_finish(struct sk_buff *skb) if (ipprot != NULL) { int ret; - if (!net_eq(net, &init_net) && !ipprot->netns_ok) { - net_info_ratelimited("%s: proto %d isn't netns-ready\n", - __func__, protocol); - kfree_skb(skb); - goto out; - } - if (!ipprot->no_policy) { if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) { kfree_skb(skb); diff --git a/net/ipv4/protocol.c b/net/ipv4/protocol.c index 0f9d09f..ce84846 100644 --- a/net/ipv4/protocol.c +++ b/net/ipv4/protocol.c @@ -37,6 +37,12 @@ const struct net_offload __rcu *inet_offloads[MAX_INET_PROTOS] __read_mostly; int inet_add_protocol(const struct net_protocol *prot, unsigned char protocol) { + if (!prot->netns_ok) { + pr_err("Protocol %u is not namespace aware, cannot register.\n", + protocol); + return -EINVAL; + } + return !cmpxchg((const struct net_protocol **)&inet_protos[protocol], NULL, prot) ? 0 : -1; } -- cgit v0.10.2 From ca2eb5679f8ddffff60156af42595df44a315ef0 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 5 Feb 2013 07:25:17 +0000 Subject: tcp: remove Appropriate Byte Count support TCP Appropriate Byte Count was added by me, but later disabled. There is no point in maintaining it since it is a potential source of bugs and Linux already implements other better window protection heuristics. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 19ac180..dc2dc87 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -130,17 +130,6 @@ somaxconn - INTEGER Defaults to 128. See also tcp_max_syn_backlog for additional tuning for TCP sockets. -tcp_abc - INTEGER - Controls Appropriate Byte Count (ABC) defined in RFC3465. - ABC is a way of increasing congestion window (cwnd) more slowly - in response to partial acknowledgments. - Possible values are: - 0 increase cwnd once per acknowledgment (no ABC) - 1 increase cwnd once per acknowledgment of full sized segment - 2 allow increase cwnd by two if acknowledgment is - of two segments to compensate for delayed acknowledgments. - Default: 0 (off) - tcp_abort_on_overflow - BOOLEAN If listening service is too slow to accept new connections, reset them. Default state is FALSE. It means that if overflow diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 4e1d228..6d0d461 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -246,7 +246,6 @@ struct tcp_sock { u32 sacked_out; /* SACK'd packets */ u32 fackets_out; /* FACK'd packets */ u32 tso_deferred; - u32 bytes_acked; /* Appropriate Byte Counting - RFC3465 */ /* from STCP, retrans queue hinting */ struct sk_buff* lost_skb_hint; diff --git a/include/net/tcp.h b/include/net/tcp.h index 614af8b..23f2e98 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -279,7 +279,6 @@ extern int sysctl_tcp_dma_copybreak; extern int sysctl_tcp_nometrics_save; extern int sysctl_tcp_moderate_rcvbuf; extern int sysctl_tcp_tso_win_divisor; -extern int sysctl_tcp_abc; extern int sysctl_tcp_mtu_probing; extern int sysctl_tcp_base_mss; extern int sysctl_tcp_workaround_signed_windows; diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 5a63844..b669ca1 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -387,7 +387,6 @@ static const struct bin_table bin_net_ipv4_table[] = { { CTL_INT, NET_TCP_MODERATE_RCVBUF, "tcp_moderate_rcvbuf" }, { CTL_INT, NET_TCP_TSO_WIN_DIVISOR, "tcp_tso_win_divisor" }, { CTL_STR, NET_TCP_CONG_CONTROL, "tcp_congestion_control" }, - { CTL_INT, NET_TCP_ABC, "tcp_abc" }, { CTL_INT, NET_TCP_MTU_PROBING, "tcp_mtu_probing" }, { CTL_INT, NET_TCP_BASE_MSS, "tcp_base_mss" }, { CTL_INT, NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS, "tcp_workaround_signed_windows" }, diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 2622707..960fd29 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -633,13 +633,6 @@ static struct ctl_table ipv4_table[] = { .proc_handler = proc_tcp_congestion_control, }, { - .procname = "tcp_abc", - .data = &sysctl_tcp_abc, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec, - }, - { .procname = "tcp_mtu_probing", .data = &sysctl_tcp_mtu_probing, .maxlen = sizeof(int), diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 3ec1f69..2c7e596 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2289,7 +2289,6 @@ int tcp_disconnect(struct sock *sk, int flags) tp->packets_out = 0; tp->snd_ssthresh = TCP_INFINITE_SSTHRESH; tp->snd_cwnd_cnt = 0; - tp->bytes_acked = 0; tp->window_clamp = 0; tcp_set_ca_state(sk, TCP_CA_Open); tcp_clear_retrans(tp); diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c index cdf2e70..019c238 100644 --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -317,28 +317,11 @@ void tcp_slow_start(struct tcp_sock *tp) snd_cwnd = 1U; } - /* RFC3465: ABC Slow start - * Increase only after a full MSS of bytes is acked - * - * TCP sender SHOULD increase cwnd by the number of - * previously unacknowledged bytes ACKed by each incoming - * acknowledgment, provided the increase is not more than L - */ - if (sysctl_tcp_abc && tp->bytes_acked < tp->mss_cache) - return; - if (sysctl_tcp_max_ssthresh > 0 && tp->snd_cwnd > sysctl_tcp_max_ssthresh) cnt = sysctl_tcp_max_ssthresh >> 1; /* limited slow start */ else cnt = snd_cwnd; /* exponential increase */ - /* RFC3465: ABC - * We MAY increase by 2 if discovered delayed ack - */ - if (sysctl_tcp_abc > 1 && tp->bytes_acked >= 2*tp->mss_cache) - cnt <<= 1; - tp->bytes_acked = 0; - tp->snd_cwnd_cnt += cnt; while (tp->snd_cwnd_cnt >= snd_cwnd) { tp->snd_cwnd_cnt -= snd_cwnd; @@ -378,20 +361,9 @@ void tcp_reno_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) /* In "safe" area, increase. */ if (tp->snd_cwnd <= tp->snd_ssthresh) tcp_slow_start(tp); - /* In dangerous area, increase slowly. */ - else if (sysctl_tcp_abc) { - /* RFC3465: Appropriate Byte Count - * increase once for each full cwnd acked - */ - if (tp->bytes_acked >= tp->snd_cwnd*tp->mss_cache) { - tp->bytes_acked -= tp->snd_cwnd*tp->mss_cache; - if (tp->snd_cwnd < tp->snd_cwnd_clamp) - tp->snd_cwnd++; - } - } else { + else tcp_cong_avoid_ai(tp, tp->snd_cwnd); - } } EXPORT_SYMBOL_GPL(tcp_reno_cong_avoid); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index e376aa9..f56bd10 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -98,7 +98,6 @@ int sysctl_tcp_frto_response __read_mostly; int sysctl_tcp_thin_dupack __read_mostly; int sysctl_tcp_moderate_rcvbuf __read_mostly = 1; -int sysctl_tcp_abc __read_mostly; int sysctl_tcp_early_retrans __read_mostly = 2; #define FLAG_DATA 0x01 /* Incoming frame contained data. */ @@ -2007,7 +2006,6 @@ static void tcp_enter_frto_loss(struct sock *sk, int allowed_segments, int flag) tp->snd_cwnd_cnt = 0; tp->snd_cwnd_stamp = tcp_time_stamp; tp->frto_counter = 0; - tp->bytes_acked = 0; tp->reordering = min_t(unsigned int, tp->reordering, sysctl_tcp_reordering); @@ -2056,7 +2054,6 @@ void tcp_enter_loss(struct sock *sk, int how) tp->snd_cwnd_cnt = 0; tp->snd_cwnd_stamp = tcp_time_stamp; - tp->bytes_acked = 0; tcp_clear_retrans_partial(tp); if (tcp_is_reno(tp)) @@ -2684,7 +2681,6 @@ static void tcp_init_cwnd_reduction(struct sock *sk, const bool set_ssthresh) struct tcp_sock *tp = tcp_sk(sk); tp->high_seq = tp->snd_nxt; - tp->bytes_acked = 0; tp->snd_cwnd_cnt = 0; tp->prior_cwnd = tp->snd_cwnd; tp->prr_delivered = 0; @@ -2735,7 +2731,6 @@ void tcp_enter_cwr(struct sock *sk, const int set_ssthresh) struct tcp_sock *tp = tcp_sk(sk); tp->prior_ssthresh = 0; - tp->bytes_acked = 0; if (inet_csk(sk)->icsk_ca_state < TCP_CA_CWR) { tp->undo_marker = 0; tcp_init_cwnd_reduction(sk, set_ssthresh); @@ -3417,7 +3412,6 @@ static void tcp_conservative_spur_to_response(struct tcp_sock *tp) { tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh); tp->snd_cwnd_cnt = 0; - tp->bytes_acked = 0; TCP_ECN_queue_cwr(tp); tcp_moderate_cwnd(tp); } @@ -3609,15 +3603,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) if (after(ack, prior_snd_una)) flag |= FLAG_SND_UNA_ADVANCED; - if (sysctl_tcp_abc) { - if (icsk->icsk_ca_state < TCP_CA_CWR) - tp->bytes_acked += ack - prior_snd_una; - else if (icsk->icsk_ca_state == TCP_CA_Loss) - /* we assume just one segment left network */ - tp->bytes_acked += min(ack - prior_snd_una, - tp->mss_cache); - } - prior_fackets = tp->fackets_out; prior_in_flight = tcp_packets_in_flight(tp); diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index f35f2df..f040928 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -446,7 +446,6 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, */ newtp->snd_cwnd = TCP_INIT_CWND; newtp->snd_cwnd_cnt = 0; - newtp->bytes_acked = 0; newtp->frto_counter = 0; newtp->frto_highmark = 0; -- cgit v0.10.2 From a0073fe18e718a1c815fe8b0120f1ac3c60284ba Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 5 Feb 2013 12:52:55 +0100 Subject: xfrm: Add a state resolution packet queue As the default, we blackhole packets until the key manager resolves the states. This patch implements a packet queue where IPsec packets are queued until the states are resolved. We generate a dummy xfrm bundle, the output routine of the returned route enqueues the packet to a per policy queue and arms a timer that checks for state resolution when dst_output() is called. Once the states are resolved, the packets are sent out of the queue. If the states are not resolved after some time, the queue is flushed. This patch keeps the defaut behaviour to blackhole packets as long as we have no states. To enable the packet queue the sysctl xfrm_larval_drop must be switched off. Signed-off-by: Steffen Klassert diff --git a/include/net/dst.h b/include/net/dst.h index 9a78810..3da47e0 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -61,6 +61,7 @@ struct dst_entry { #define DST_NOPEER 0x0040 #define DST_FAKE_RTABLE 0x0080 #define DST_XFRM_TUNNEL 0x0100 +#define DST_XFRM_QUEUE 0x0200 unsigned short pending_confirm; diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 814a1ba..30f3e5b 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -501,6 +501,12 @@ struct xfrm_policy_walk { u32 seq; }; +struct xfrm_policy_queue { + struct sk_buff_head hold_queue; + struct timer_list hold_timer; + unsigned long timeout; +}; + struct xfrm_policy { #ifdef CONFIG_NET_NS struct net *xp_net; @@ -522,6 +528,7 @@ struct xfrm_policy { struct xfrm_lifetime_cfg lft; struct xfrm_lifetime_cur curlft; struct xfrm_policy_walk_entry walk; + struct xfrm_policy_queue polq; u8 type; u8 action; u8 flags; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 41eabc4..456b11b 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -35,6 +35,10 @@ #include "xfrm_hash.h" +#define XFRM_QUEUE_TMO_MIN ((unsigned)(HZ/10)) +#define XFRM_QUEUE_TMO_MAX ((unsigned)(60*HZ)) +#define XFRM_MAX_QUEUE_LEN 100 + DEFINE_MUTEX(xfrm_cfg_mutex); EXPORT_SYMBOL(xfrm_cfg_mutex); @@ -51,7 +55,7 @@ static struct kmem_cache *xfrm_dst_cache __read_mostly; static void xfrm_init_pmtu(struct dst_entry *dst); static int stale_bundle(struct dst_entry *dst); static int xfrm_bundle_ok(struct xfrm_dst *xdst); - +static void xfrm_policy_queue_process(unsigned long arg); static struct xfrm_policy *__xfrm_policy_unlink(struct xfrm_policy *pol, int dir); @@ -287,8 +291,11 @@ struct xfrm_policy *xfrm_policy_alloc(struct net *net, gfp_t gfp) INIT_HLIST_NODE(&policy->byidx); rwlock_init(&policy->lock); atomic_set(&policy->refcnt, 1); + skb_queue_head_init(&policy->polq.hold_queue); setup_timer(&policy->timer, xfrm_policy_timer, (unsigned long)policy); + setup_timer(&policy->polq.hold_timer, xfrm_policy_queue_process, + (unsigned long)policy); policy->flo.ops = &xfrm_policy_fc_ops; } return policy; @@ -309,6 +316,16 @@ void xfrm_policy_destroy(struct xfrm_policy *policy) } EXPORT_SYMBOL(xfrm_policy_destroy); +static void xfrm_queue_purge(struct sk_buff_head *list) +{ + struct sk_buff *skb; + + while ((skb = skb_dequeue(list)) != NULL) { + dev_put(skb->dev); + kfree_skb(skb); + } +} + /* Rule must be locked. Release descentant resources, announce * entry dead. The rule must be unlinked from lists to the moment. */ @@ -319,6 +336,9 @@ static void xfrm_policy_kill(struct xfrm_policy *policy) atomic_inc(&policy->genid); + del_timer(&policy->polq.hold_timer); + xfrm_queue_purge(&policy->polq.hold_queue); + if (del_timer(&policy->timer)) xfrm_pol_put(policy); @@ -562,6 +582,31 @@ static inline int selector_cmp(struct xfrm_selector *s1, struct xfrm_selector *s return 0; } +static void xfrm_policy_requeue(struct xfrm_policy *old, + struct xfrm_policy *new) +{ + struct xfrm_policy_queue *pq = &old->polq; + struct sk_buff_head list; + + __skb_queue_head_init(&list); + + spin_lock_bh(&pq->hold_queue.lock); + skb_queue_splice_init(&pq->hold_queue, &list); + del_timer(&pq->hold_timer); + spin_unlock_bh(&pq->hold_queue.lock); + + if (skb_queue_empty(&list)) + return; + + pq = &new->polq; + + spin_lock_bh(&pq->hold_queue.lock); + skb_queue_splice(&list, &pq->hold_queue); + pq->timeout = XFRM_QUEUE_TMO_MIN; + mod_timer(&pq->hold_timer, jiffies); + spin_unlock_bh(&pq->hold_queue.lock); +} + int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) { struct net *net = xp_net(policy); @@ -603,8 +648,10 @@ int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) net->xfrm.policy_count[dir]++; atomic_inc(&flow_cache_genid); rt_genid_bump(net); - if (delpol) + if (delpol) { + xfrm_policy_requeue(delpol, policy); __xfrm_policy_unlink(delpol, dir); + } policy->index = delpol ? delpol->index : xfrm_gen_index(net, dir); hlist_add_head(&policy->byidx, net->xfrm.policy_byidx+idx_hash(net, policy->index)); policy->curlft.add_time = get_seconds(); @@ -1115,11 +1162,15 @@ int xfrm_sk_policy_insert(struct sock *sk, int dir, struct xfrm_policy *pol) pol->index = xfrm_gen_index(net, XFRM_POLICY_MAX+dir); __xfrm_policy_link(pol, XFRM_POLICY_MAX+dir); } - if (old_pol) + if (old_pol) { + if (pol) + xfrm_policy_requeue(old_pol, pol); + /* Unlinking succeeds always. This is the only function * allowed to delete or replace socket policy. */ __xfrm_policy_unlink(old_pol, XFRM_POLICY_MAX+dir); + } write_unlock_bh(&xfrm_policy_lock); if (old_pol) { @@ -1310,6 +1361,8 @@ static struct flow_cache_object *xfrm_bundle_flo_get(struct flow_cache_object *f * It means we need to try again resolving. */ if (xdst->num_xfrms > 0) return NULL; + } else if (dst->flags & DST_XFRM_QUEUE) { + return NULL; } else { /* Real bundle */ if (stale_bundle(dst)) @@ -1673,6 +1726,171 @@ xfrm_resolve_and_create_bundle(struct xfrm_policy **pols, int num_pols, return xdst; } +static void xfrm_policy_queue_process(unsigned long arg) +{ + int err = 0; + struct sk_buff *skb; + struct sock *sk; + struct dst_entry *dst; + struct net_device *dev; + struct xfrm_policy *pol = (struct xfrm_policy *)arg; + struct xfrm_policy_queue *pq = &pol->polq; + struct flowi fl; + struct sk_buff_head list; + + spin_lock(&pq->hold_queue.lock); + skb = skb_peek(&pq->hold_queue); + dst = skb_dst(skb); + sk = skb->sk; + xfrm_decode_session(skb, &fl, dst->ops->family); + spin_unlock(&pq->hold_queue.lock); + + dst_hold(dst->path); + dst = xfrm_lookup(xp_net(pol), dst->path, &fl, + sk, 0); + if (IS_ERR(dst)) + goto purge_queue; + + if (dst->flags & DST_XFRM_QUEUE) { + dst_release(dst); + + if (pq->timeout >= XFRM_QUEUE_TMO_MAX) + goto purge_queue; + + pq->timeout = pq->timeout << 1; + mod_timer(&pq->hold_timer, jiffies + pq->timeout); + return; + } + + dst_release(dst); + + __skb_queue_head_init(&list); + + spin_lock(&pq->hold_queue.lock); + pq->timeout = 0; + skb_queue_splice_init(&pq->hold_queue, &list); + spin_unlock(&pq->hold_queue.lock); + + while (!skb_queue_empty(&list)) { + skb = __skb_dequeue(&list); + + xfrm_decode_session(skb, &fl, skb_dst(skb)->ops->family); + dst_hold(skb_dst(skb)->path); + dst = xfrm_lookup(xp_net(pol), skb_dst(skb)->path, + &fl, skb->sk, 0); + if (IS_ERR(dst)) { + dev_put(skb->dev); + kfree_skb(skb); + continue; + } + + nf_reset(skb); + skb_dst_drop(skb); + skb_dst_set(skb, dst); + + dev = skb->dev; + err = dst_output(skb); + dev_put(dev); + } + + return; + +purge_queue: + pq->timeout = 0; + xfrm_queue_purge(&pq->hold_queue); +} + +static int xdst_queue_output(struct sk_buff *skb) +{ + unsigned long sched_next; + struct dst_entry *dst = skb_dst(skb); + struct xfrm_dst *xdst = (struct xfrm_dst *) dst; + struct xfrm_policy_queue *pq = &xdst->pols[0]->polq; + + if (pq->hold_queue.qlen > XFRM_MAX_QUEUE_LEN) { + kfree_skb(skb); + return -EAGAIN; + } + + skb_dst_force(skb); + dev_hold(skb->dev); + + spin_lock_bh(&pq->hold_queue.lock); + + if (!pq->timeout) + pq->timeout = XFRM_QUEUE_TMO_MIN; + + sched_next = jiffies + pq->timeout; + + if (del_timer(&pq->hold_timer)) { + if (time_before(pq->hold_timer.expires, sched_next)) + sched_next = pq->hold_timer.expires; + } + + __skb_queue_tail(&pq->hold_queue, skb); + mod_timer(&pq->hold_timer, sched_next); + + spin_unlock_bh(&pq->hold_queue.lock); + + return 0; +} + +static struct xfrm_dst *xfrm_create_dummy_bundle(struct net *net, + struct dst_entry *dst, + const struct flowi *fl, + int num_xfrms, + u16 family) +{ + int err; + struct net_device *dev; + struct dst_entry *dst1; + struct xfrm_dst *xdst; + + xdst = xfrm_alloc_dst(net, family); + if (IS_ERR(xdst)) + return xdst; + + if (net->xfrm.sysctl_larval_drop || num_xfrms <= 0 || + (fl->flowi_flags & FLOWI_FLAG_CAN_SLEEP)) + return xdst; + + dst1 = &xdst->u.dst; + dst_hold(dst); + xdst->route = dst; + + dst_copy_metrics(dst1, dst); + + dst1->obsolete = DST_OBSOLETE_FORCE_CHK; + dst1->flags |= DST_HOST | DST_XFRM_QUEUE; + dst1->lastuse = jiffies; + + dst1->input = dst_discard; + dst1->output = xdst_queue_output; + + dst_hold(dst); + dst1->child = dst; + dst1->path = dst; + + xfrm_init_path((struct xfrm_dst *)dst1, dst, 0); + + err = -ENODEV; + dev = dst->dev; + if (!dev) + goto free_dst; + + err = xfrm_fill_dst(xdst, dev, fl); + if (err) + goto free_dst; + +out: + return xdst; + +free_dst: + dst_release(dst1); + xdst = ERR_PTR(err); + goto out; +} + static struct flow_cache_object * xfrm_bundle_lookup(struct net *net, const struct flowi *fl, u16 family, u8 dir, struct flow_cache_object *oldflo, void *ctx) @@ -1751,7 +1969,7 @@ make_dummy_bundle: /* We found policies, but there's no bundles to instantiate: * either because the policy blocks, has no transformations or * we could not build template (no xfrm_states).*/ - xdst = xfrm_alloc_dst(net, family); + xdst = xfrm_create_dummy_bundle(net, dst_orig, fl, num_xfrms, family); if (IS_ERR(xdst)) { xfrm_pols_put(pols, num_pols); return ERR_CAST(xdst); @@ -2359,6 +2577,9 @@ static int xfrm_bundle_ok(struct xfrm_dst *first) (dst->dev && !netif_running(dst->dev))) return 0; + if (dst->flags & DST_XFRM_QUEUE) + return 1; + last = NULL; do { -- cgit v0.10.2 From 1f53c808502f1472bfc5829e6dd80317c7198a4a Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Wed, 6 Feb 2013 10:46:23 +0100 Subject: xfrm: remove unused xfrm4_policy_fini() Function xfrm4_policy_fini() is unused since xfrm4_fini() was removed in 2.6.11. Signed-off-by: Michal Kubecek Signed-off-by: Steffen Klassert diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index 3be0ac2..0e28383 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -270,15 +270,6 @@ static void __init xfrm4_policy_init(void) xfrm_policy_register_afinfo(&xfrm4_policy_afinfo); } -static void __exit xfrm4_policy_fini(void) -{ -#ifdef CONFIG_SYSCTL - if (sysctl_hdr) - unregister_net_sysctl_table(sysctl_hdr); -#endif - xfrm_policy_unregister_afinfo(&xfrm4_policy_afinfo); -} - void __init xfrm4_init(void) { dst_entries_init(&xfrm4_dst_ops); -- cgit v0.10.2 From 8d068875caca3b507ffa8a57d521483fd4eebcc7 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Wed, 6 Feb 2013 10:46:33 +0100 Subject: xfrm: make gc_thresh configurable in all namespaces The xfrm gc threshold can be configured via xfrm{4,6}_gc_thresh sysctl but currently only in init_net, other namespaces always use the default value. This can substantially limit the number of IPsec tunnels that can be effectively used. Signed-off-by: Michal Kubecek Signed-off-by: Steffen Klassert diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index 9b78862..2ba9de8 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -22,6 +22,7 @@ struct netns_ipv4 { struct ctl_table_header *frags_hdr; struct ctl_table_header *ipv4_hdr; struct ctl_table_header *route_hdr; + struct ctl_table_header *xfrm4_hdr; #endif struct ipv4_devconf *devconf_all; struct ipv4_devconf *devconf_dflt; diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h index 214cb0a..1242f37 100644 --- a/include/net/netns/ipv6.h +++ b/include/net/netns/ipv6.h @@ -16,6 +16,7 @@ struct netns_sysctl_ipv6 { struct ctl_table_header *route_hdr; struct ctl_table_header *icmp_hdr; struct ctl_table_header *frags_hdr; + struct ctl_table_header *xfrm6_hdr; #endif int bindv6only; int flush_delay; diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index 0e28383..9a459be 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -262,7 +262,51 @@ static struct ctl_table xfrm4_policy_table[] = { { } }; -static struct ctl_table_header *sysctl_hdr; +static int __net_init xfrm4_net_init(struct net *net) +{ + struct ctl_table *table; + struct ctl_table_header *hdr; + + table = xfrm4_policy_table; + if (!net_eq(net, &init_net)) { + table = kmemdup(table, sizeof(xfrm4_policy_table), GFP_KERNEL); + if (!table) + goto err_alloc; + + table[0].data = &net->xfrm.xfrm4_dst_ops.gc_thresh; + } + + hdr = register_net_sysctl(net, "net/ipv4", table); + if (!hdr) + goto err_reg; + + net->ipv4.xfrm4_hdr = hdr; + return 0; + +err_reg: + if (!net_eq(net, &init_net)) + kfree(table); +err_alloc: + return -ENOMEM; +} + +static void __net_exit xfrm4_net_exit(struct net *net) +{ + struct ctl_table *table; + + if (net->ipv4.xfrm4_hdr == NULL) + return; + + table = net->ipv4.xfrm4_hdr->ctl_table_arg; + unregister_net_sysctl_table(net->ipv4.xfrm4_hdr); + if (!net_eq(net, &init_net)) + kfree(table); +} + +static struct pernet_operations __net_initdata xfrm4_net_ops = { + .init = xfrm4_net_init, + .exit = xfrm4_net_exit, +}; #endif static void __init xfrm4_policy_init(void) @@ -277,8 +321,7 @@ void __init xfrm4_init(void) xfrm4_state_init(); xfrm4_policy_init(); #ifdef CONFIG_SYSCTL - sysctl_hdr = register_net_sysctl(&init_net, "net/ipv4", - xfrm4_policy_table); + register_pernet_subsys(&xfrm4_net_ops); #endif } diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 1282737..4ef7bdb 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -320,7 +320,51 @@ static struct ctl_table xfrm6_policy_table[] = { { } }; -static struct ctl_table_header *sysctl_hdr; +static int __net_init xfrm6_net_init(struct net *net) +{ + struct ctl_table *table; + struct ctl_table_header *hdr; + + table = xfrm6_policy_table; + if (!net_eq(net, &init_net)) { + table = kmemdup(table, sizeof(xfrm6_policy_table), GFP_KERNEL); + if (!table) + goto err_alloc; + + table[0].data = &net->xfrm.xfrm6_dst_ops.gc_thresh; + } + + hdr = register_net_sysctl(net, "net/ipv6", table); + if (!hdr) + goto err_reg; + + net->ipv6.sysctl.xfrm6_hdr = hdr; + return 0; + +err_reg: + if (!net_eq(net, &init_net)) + kfree(table); +err_alloc: + return -ENOMEM; +} + +static void __net_exit xfrm6_net_exit(struct net *net) +{ + struct ctl_table *table; + + if (net->ipv6.sysctl.xfrm6_hdr == NULL) + return; + + table = net->ipv6.sysctl.xfrm6_hdr->ctl_table_arg; + unregister_net_sysctl_table(net->ipv6.sysctl.xfrm6_hdr); + if (!net_eq(net, &init_net)) + kfree(table); +} + +static struct pernet_operations xfrm6_net_ops = { + .init = xfrm6_net_init, + .exit = xfrm6_net_exit, +}; #endif int __init xfrm6_init(void) @@ -339,8 +383,7 @@ int __init xfrm6_init(void) goto out_policy; #ifdef CONFIG_SYSCTL - sysctl_hdr = register_net_sysctl(&init_net, "net/ipv6", - xfrm6_policy_table); + register_pernet_subsys(&xfrm6_net_ops); #endif out: return ret; @@ -352,8 +395,7 @@ out_policy: void xfrm6_fini(void) { #ifdef CONFIG_SYSCTL - if (sysctl_hdr) - unregister_net_sysctl_table(sysctl_hdr); + unregister_pernet_subsys(&xfrm6_net_ops); #endif xfrm6_policy_fini(); xfrm6_state_fini(); -- cgit v0.10.2 From 62b5942aa5182686e6bab2c6db5dbf2672b8981e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 4 Feb 2013 16:48:16 +0000 Subject: net: core: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index a87bc74..e04bfdc 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5958,10 +5958,9 @@ static int netif_alloc_rx_queues(struct net_device *dev) BUG_ON(count < 1); rx = kcalloc(count, sizeof(struct netdev_rx_queue), GFP_KERNEL); - if (!rx) { - pr_err("netdev: Unable to allocate %u rx queues\n", count); + if (!rx) return -ENOMEM; - } + dev->_rx = rx; for (i = 0; i < count; i++) @@ -5992,10 +5991,9 @@ static int netif_alloc_netdev_queues(struct net_device *dev) BUG_ON(count < 1); tx = kcalloc(count, sizeof(struct netdev_queue), GFP_KERNEL); - if (!tx) { - pr_err("netdev: Unable to allocate %u tx queues\n", count); + if (!tx) return -ENOMEM; - } + dev->_tx = tx; netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL); @@ -6482,10 +6480,8 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name, alloc_size += NETDEV_ALIGN - 1; p = kzalloc(alloc_size, GFP_KERNEL); - if (!p) { - pr_err("alloc_netdev: Unable to allocate device\n"); + if (!p) return NULL; - } dev = PTR_ALIGN(p, NETDEV_ALIGN); dev->padded = (char *)dev - (char *)p; diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c index 5e67def..0777d0a 100644 --- a/net/core/netprio_cgroup.c +++ b/net/core/netprio_cgroup.c @@ -69,10 +69,8 @@ static int extend_netdev_table(struct net_device *dev, u32 target_idx) /* allocate & copy */ new = kzalloc(new_sz, GFP_KERNEL); - if (!new) { - pr_warn("Unable to alloc new priomap!\n"); + if (!new) return -ENOMEM; - } if (old) memcpy(new->priomap, old->priomap, -- cgit v0.10.2 From efc496eb317ce46755acc46172daa0992b184ed0 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 4 Feb 2013 18:22:29 +0000 Subject: drivers: net: misc: Remove unused OOM variables commits 9d11bd159 ("wimax: Remove unnecessary alloc/OOM messages, alloc cleanups") and b2adaca92 ("ethernet: Remove unnecessary alloc/OOM messages, alloc cleanups") added a couple of unused variable warnings. Remove the now unused variables. Noticed-by: kbuild test robot Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index db50598..4782dcf 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -201,7 +201,6 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter) struct netxen_cmd_buffer *cmd_buf_arr; struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; tx_ring = kzalloc(sizeof(struct nx_host_tx_ring), GFP_KERNEL); if (tx_ring == NULL) diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 8077e6e..0b60295 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -1346,7 +1346,6 @@ EXPORT_SYMBOL(i2400m_unknown_barker); int i2400m_rx_setup(struct i2400m *i2400m) { int result = 0; - struct device *dev = i2400m_dev(i2400m); i2400m->rx_reorder = i2400m_rx_reorder_disabled? 0 : 1; if (i2400m->rx_reorder) { -- cgit v0.10.2 From f4e53e292ad0626a9d4f80cbdb6adae867d8b2bc Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 5 Feb 2013 01:48:05 +0000 Subject: ipv6: Don't send packet to big messages to self Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu in the case when IPsec is used. So use ipv6_local_error() instead to notify the socket about the error. Reported-by: Jiri Bohac Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 906b7e6..c953825 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -242,9 +242,8 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6, dst->dev, dst_output); } - net_dbg_ratelimited("IPv6: sending pkt_too_big to self\n"); skb->dev = dst->dev; - icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); + ipv6_local_error(sk, EMSGSIZE, fl6, mtu); IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_FRAGFAILS); kfree_skb(skb); return -EMSGSIZE; -- cgit v0.10.2 From f458c647ea5cdd956f8055a4178072be460559f1 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Tue, 5 Feb 2013 04:25:35 +0000 Subject: wpan: whitespace fix Signed-off-by: Alexander Aring Signed-off-by: David S. Miller diff --git a/net/mac802154/wpan.c b/net/mac802154/wpan.c index 199b922..98c867b 100644 --- a/net/mac802154/wpan.c +++ b/net/mac802154/wpan.c @@ -41,7 +41,7 @@ static inline int mac802154_fetch_skb_u8(struct sk_buff *skb, u8 *val) return -EINVAL; *val = skb->data[0]; - skb_pull(skb, 1); + skb_pull(skb, 1); return 0; } -- cgit v0.10.2 From ca99ca14c95ae49fb4c9cd3abf5f84d11a7e8a61 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 5 Feb 2013 08:05:43 +0000 Subject: netpoll: protect napi_poll and poll_controller during dev_[open|close] Ivan Vercera was recently backporting commit 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 to a RHEL kernel, and I noticed that, while this patch protects the tg3 driver from having its ndo_poll_controller routine called during device initalization, it does nothing for the driver during shutdown. I.e. it would be entirely possible to have the ndo_poll_controller method (or subsequently the ndo_poll) routine called for a driver in the netpoll path on CPU A while in parallel on CPU B, the ndo_close or ndo_open routine could be called. Given that the two latter routines tend to initizlize and free many data structures that the former two rely on, the result can easily be data corruption or various other crashes. Furthermore, it seems that this is potentially a problem with all net drivers that support netpoll, and so this should ideally be fixed in a common path. As Ben H Pointed out to me, we can't preform dev_open/dev_close in atomic context, so I've come up with this solution. We can use a mutex to sleep in open/close paths and just do a mutex_trylock in the napi poll path and abandon the poll attempt if we're locked, as we'll just retry the poll on the next send anyway. I've tested this here by flooding netconsole with messages on a system whos nic driver I modfied to periodically return NETDEV_TX_BUSY, so that the netpoll tx workqueue would be forced to send frames and poll the device. While this was going on I rapidly ifdown/up'ed the interface and watched for any problems. I've not found any. Signed-off-by: Neil Horman CC: Ivan Vecera CC: "David S. Miller" CC: Ben Hutchings CC: Francois Romieu CC: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index f54c3bb..ab856d5 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -38,8 +38,9 @@ struct netpoll { struct netpoll_info { atomic_t refcnt; - int rx_flags; + unsigned long rx_flags; spinlock_t rx_lock; + struct mutex dev_lock; struct list_head rx_np; /* netpolls that registered an rx_hook */ struct sk_buff_head neigh_tx; /* list of neigh requests to reply to */ @@ -51,6 +52,14 @@ struct netpoll_info { struct rcu_head rcu; }; +#ifdef CONFIG_NETPOLL +extern int netpoll_rx_disable(struct net_device *dev); +extern void netpoll_rx_enable(struct net_device *dev); +#else +static inline int netpoll_rx_disable(struct net_device *dev) { return 0; } +static inline void netpoll_rx_enable(struct net_device *dev) { return; } +#endif + void netpoll_send_udp(struct netpoll *np, const char *msg, int len); void netpoll_print_options(struct netpoll *np); int netpoll_parse_options(struct netpoll *np, char *opt); diff --git a/net/core/dev.c b/net/core/dev.c index e04bfdc..2b275a7 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1266,6 +1266,14 @@ static int __dev_open(struct net_device *dev) if (!netif_device_present(dev)) return -ENODEV; + /* Block netpoll from trying to do any rx path servicing. + * If we don't do this there is a chance ndo_poll_controller + * or ndo_poll may be running while we open the device + */ + ret = netpoll_rx_disable(dev); + if (ret) + return ret; + ret = call_netdevice_notifiers(NETDEV_PRE_UP, dev); ret = notifier_to_errno(ret); if (ret) @@ -1279,6 +1287,8 @@ static int __dev_open(struct net_device *dev) if (!ret && ops->ndo_open) ret = ops->ndo_open(dev); + netpoll_rx_enable(dev); + if (ret) clear_bit(__LINK_STATE_START, &dev->state); else { @@ -1370,9 +1380,16 @@ static int __dev_close(struct net_device *dev) int retval; LIST_HEAD(single); + /* Temporarily disable netpoll until the interface is down */ + retval = netpoll_rx_disable(dev); + if (retval) + return retval; + list_add(&dev->unreg_list, &single); retval = __dev_close_many(&single); list_del(&single); + + netpoll_rx_enable(dev); return retval; } @@ -1408,14 +1425,22 @@ static int dev_close_many(struct list_head *head) */ int dev_close(struct net_device *dev) { + int ret = 0; if (dev->flags & IFF_UP) { LIST_HEAD(single); + /* Block netpoll rx while the interface is going down */ + ret = netpoll_rx_disable(dev); + if (ret) + return ret; + list_add(&dev->unreg_list, &single); dev_close_many(&single); list_del(&single); + + netpoll_rx_enable(dev); } - return 0; + return ret; } EXPORT_SYMBOL(dev_close); diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 331ccb9..edcd9ad 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -47,6 +47,8 @@ static struct sk_buff_head skb_pool; static atomic_t trapped; +static struct srcu_struct netpoll_srcu; + #define USEC_PER_POLL 50 #define NETPOLL_RX_ENABLED 1 #define NETPOLL_RX_DROP 2 @@ -199,6 +201,13 @@ static void netpoll_poll_dev(struct net_device *dev) const struct net_device_ops *ops; struct netpoll_info *ni = rcu_dereference_bh(dev->npinfo); + /* Don't do any rx activity if the dev_lock mutex is held + * the dev_open/close paths use this to block netpoll activity + * while changing device state + */ + if (!mutex_trylock(&dev->npinfo->dev_lock)) + return; + if (!dev || !netif_running(dev)) return; @@ -211,6 +220,8 @@ static void netpoll_poll_dev(struct net_device *dev) poll_napi(dev); + mutex_unlock(&dev->npinfo->dev_lock); + if (dev->flags & IFF_SLAVE) { if (ni) { struct net_device *bond_dev; @@ -231,6 +242,31 @@ static void netpoll_poll_dev(struct net_device *dev) zap_completion_queue(); } +int netpoll_rx_disable(struct net_device *dev) +{ + struct netpoll_info *ni; + int idx; + might_sleep(); + idx = srcu_read_lock(&netpoll_srcu); + ni = srcu_dereference(dev->npinfo, &netpoll_srcu); + if (ni) + mutex_lock(&ni->dev_lock); + srcu_read_unlock(&netpoll_srcu, idx); + return 0; +} +EXPORT_SYMBOL(netpoll_rx_disable); + +void netpoll_rx_enable(struct net_device *dev) +{ + struct netpoll_info *ni; + rcu_read_lock(); + ni = rcu_dereference(dev->npinfo); + if (ni) + mutex_unlock(&ni->dev_lock); + rcu_read_unlock(); +} +EXPORT_SYMBOL(netpoll_rx_enable); + static void refill_skbs(void) { struct sk_buff *skb; @@ -1004,6 +1040,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp) INIT_LIST_HEAD(&npinfo->rx_np); spin_lock_init(&npinfo->rx_lock); + mutex_init(&npinfo->dev_lock); skb_queue_head_init(&npinfo->neigh_tx); skb_queue_head_init(&npinfo->txq); INIT_DELAYED_WORK(&npinfo->tx_work, queue_process); @@ -1169,6 +1206,7 @@ EXPORT_SYMBOL(netpoll_setup); static int __init netpoll_init(void) { skb_queue_head_init(&skb_pool); + init_srcu_struct(&netpoll_srcu); return 0; } core_initcall(netpoll_init); @@ -1208,6 +1246,8 @@ void __netpoll_cleanup(struct netpoll *np) spin_unlock_irqrestore(&npinfo->rx_lock, flags); } + synchronize_srcu(&netpoll_srcu); + if (atomic_dec_and_test(&npinfo->refcnt)) { const struct net_device_ops *ops; -- cgit v0.10.2 From e11b220f336c654db876027d40953acef90b0cae Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 5 Feb 2013 08:26:47 +0000 Subject: drivers: net: cpsw: Add helper functions for VLAN ALE implementation Add helper functions for VLAN ALE implementations for Add, Delete Dump VLAN related ALE entries Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 9e63bff..534bf7b 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -345,7 +345,7 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev) /* program multicast address list into ALE register */ netdev_for_each_mc_addr(ha, ndev) { cpsw_ale_add_mcast(priv->ale, (u8 *)ha->addr, - ALE_ALL_PORTS << priv->host_port, 0, 0); + ALE_ALL_PORTS << priv->host_port, 0, 0, 0); } } } @@ -592,7 +592,7 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) slave_port = cpsw_get_slave_port(priv, slave->slave_num); cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, - 1 << slave_port, 0, ALE_MCAST_FWD_2); + 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); slave->phy = phy_connect(priv->ndev, slave->data->phy_id, &cpsw_adjust_link, slave->data->phy_if); @@ -624,9 +624,9 @@ static void cpsw_init_host_port(struct cpsw_priv *priv) cpsw_ale_control_set(priv->ale, priv->host_port, ALE_PORT_STATE, ALE_PORT_STATE_FORWARD); - cpsw_ale_add_ucast(priv->ale, priv->mac_addr, priv->host_port, 0); + cpsw_ale_add_ucast(priv->ale, priv->mac_addr, priv->host_port, 0, 0); cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, - 1 << priv->host_port, 0, ALE_MCAST_FWD_2); + 1 << priv->host_port, 0, 0, ALE_MCAST_FWD_2); } static int cpsw_ndo_open(struct net_device *ndev) diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c index 0e9ccc2..7fa60d6 100644 --- a/drivers/net/ethernet/ti/cpsw_ale.c +++ b/drivers/net/ethernet/ti/cpsw_ale.c @@ -148,7 +148,7 @@ static int cpsw_ale_write(struct cpsw_ale *ale, int idx, u32 *ale_entry) return idx; } -static int cpsw_ale_match_addr(struct cpsw_ale *ale, u8 *addr) +int cpsw_ale_match_addr(struct cpsw_ale *ale, u8 *addr, u16 vid) { u32 ale_entry[ALE_ENTRY_WORDS]; int type, idx; @@ -160,6 +160,8 @@ static int cpsw_ale_match_addr(struct cpsw_ale *ale, u8 *addr) type = cpsw_ale_get_entry_type(ale_entry); if (type != ALE_TYPE_ADDR && type != ALE_TYPE_VLAN_ADDR) continue; + if (cpsw_ale_get_vlan_id(ale_entry) != vid) + continue; cpsw_ale_get_addr(ale_entry, entry_addr); if (memcmp(entry_addr, addr, 6) == 0) return idx; @@ -167,6 +169,22 @@ static int cpsw_ale_match_addr(struct cpsw_ale *ale, u8 *addr) return -ENOENT; } +int cpsw_ale_match_vlan(struct cpsw_ale *ale, u16 vid) +{ + u32 ale_entry[ALE_ENTRY_WORDS]; + int type, idx; + + for (idx = 0; idx < ale->params.ale_entries; idx++) { + cpsw_ale_read(ale, idx, ale_entry); + type = cpsw_ale_get_entry_type(ale_entry); + if (type != ALE_TYPE_VLAN) + continue; + if (cpsw_ale_get_vlan_id(ale_entry) == vid) + return idx; + } + return -ENOENT; +} + static int cpsw_ale_match_free(struct cpsw_ale *ale) { u32 ale_entry[ALE_ENTRY_WORDS]; @@ -274,19 +292,32 @@ int cpsw_ale_flush(struct cpsw_ale *ale, int port_mask) return 0; } -int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port, int flags) +static inline void cpsw_ale_set_vlan_entry_type(u32 *ale_entry, + int flags, u16 vid) +{ + if (flags & ALE_VLAN) { + cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_VLAN_ADDR); + cpsw_ale_set_vlan_id(ale_entry, vid); + } else { + cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR); + } +} + +int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port, + int flags, u16 vid) { u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; int idx; - cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR); + cpsw_ale_set_vlan_entry_type(ale_entry, flags, vid); + cpsw_ale_set_addr(ale_entry, addr); cpsw_ale_set_ucast_type(ale_entry, ALE_UCAST_PERSISTANT); cpsw_ale_set_secure(ale_entry, (flags & ALE_SECURE) ? 1 : 0); cpsw_ale_set_blocked(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0); cpsw_ale_set_port_num(ale_entry, port); - idx = cpsw_ale_match_addr(ale, addr); + idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0); if (idx < 0) idx = cpsw_ale_match_free(ale); if (idx < 0) @@ -298,12 +329,13 @@ int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port, int flags) return 0; } -int cpsw_ale_del_ucast(struct cpsw_ale *ale, u8 *addr, int port) +int cpsw_ale_del_ucast(struct cpsw_ale *ale, u8 *addr, int port, + int flags, u16 vid) { u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; int idx; - idx = cpsw_ale_match_addr(ale, addr); + idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0); if (idx < 0) return -ENOENT; @@ -313,18 +345,19 @@ int cpsw_ale_del_ucast(struct cpsw_ale *ale, u8 *addr, int port) } int cpsw_ale_add_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask, - int super, int mcast_state) + int flags, u16 vid, int mcast_state) { u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; int idx, mask; - idx = cpsw_ale_match_addr(ale, addr); + idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0); if (idx >= 0) cpsw_ale_read(ale, idx, ale_entry); - cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR); + cpsw_ale_set_vlan_entry_type(ale_entry, flags, vid); + cpsw_ale_set_addr(ale_entry, addr); - cpsw_ale_set_super(ale_entry, super); + cpsw_ale_set_super(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0); cpsw_ale_set_mcast_state(ale_entry, mcast_state); mask = cpsw_ale_get_port_mask(ale_entry); @@ -342,12 +375,13 @@ int cpsw_ale_add_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask, return 0; } -int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask) +int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask, + int flags, u16 vid) { u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; int idx; - idx = cpsw_ale_match_addr(ale, addr); + idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0); if (idx < 0) return -EINVAL; @@ -362,6 +396,55 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask) return 0; } +int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag, + int reg_mcast, int unreg_mcast) +{ + u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; + int idx; + + idx = cpsw_ale_match_vlan(ale, vid); + if (idx >= 0) + cpsw_ale_read(ale, idx, ale_entry); + + cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_VLAN); + cpsw_ale_set_vlan_id(ale_entry, vid); + + cpsw_ale_set_vlan_untag_force(ale_entry, untag); + cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast); + cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast); + cpsw_ale_set_vlan_member_list(ale_entry, port); + + if (idx < 0) + idx = cpsw_ale_match_free(ale); + if (idx < 0) + idx = cpsw_ale_find_ageable(ale); + if (idx < 0) + return -ENOMEM; + + cpsw_ale_write(ale, idx, ale_entry); + return 0; +} + +int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask) +{ + u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; + int idx; + + idx = cpsw_ale_match_vlan(ale, vid); + if (idx < 0) + return -ENOENT; + + cpsw_ale_read(ale, idx, ale_entry); + + if (port_mask) + cpsw_ale_set_vlan_member_list(ale_entry, port_mask); + else + cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE); + + cpsw_ale_write(ale, idx, ale_entry); + return 0; +} + struct ale_control_info { const char *name; int offset, port_offset; diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h index 2bd09cb..a002417 100644 --- a/drivers/net/ethernet/ti/cpsw_ale.h +++ b/drivers/net/ethernet/ti/cpsw_ale.h @@ -64,8 +64,10 @@ enum cpsw_ale_port_state { }; /* ALE unicast entry flags - passed into cpsw_ale_add_ucast() */ -#define ALE_SECURE 1 -#define ALE_BLOCKED 2 +#define ALE_SECURE BIT(0) +#define ALE_BLOCKED BIT(1) +#define ALE_SUPER BIT(2) +#define ALE_VLAN BIT(3) #define ALE_MCAST_FWD 0 #define ALE_MCAST_BLOCK_LEARN_FWD 1 @@ -81,11 +83,17 @@ void cpsw_ale_stop(struct cpsw_ale *ale); int cpsw_ale_set_ageout(struct cpsw_ale *ale, int ageout); int cpsw_ale_flush(struct cpsw_ale *ale, int port_mask); int cpsw_ale_flush_multicast(struct cpsw_ale *ale, int port_mask); -int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port, int flags); -int cpsw_ale_del_ucast(struct cpsw_ale *ale, u8 *addr, int port); +int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port, + int flags, u16 vid); +int cpsw_ale_del_ucast(struct cpsw_ale *ale, u8 *addr, int port, + int flags, u16 vid); int cpsw_ale_add_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask, - int super, int mcast_state); -int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask); + int flags, u16 vid, int mcast_state); +int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask, + int flags, u16 vid); +int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag, + int reg_mcast, int unreg_mcast); +int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port); int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control); int cpsw_ale_control_set(struct cpsw_ale *ale, int port, -- cgit v0.10.2 From 3b72c2fe0c6bbec42ed7f899931daef227b80322 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 5 Feb 2013 08:26:48 +0000 Subject: drivers: net:ethernet: cpsw: add support for VLAN adding support for VLAN interface for cpsw. CPSW VLAN Capability * Can filter VLAN packets in Hardware Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 534bf7b..888708c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -118,6 +119,9 @@ do { \ #define TX_PRIORITY_MAPPING 0x33221100 #define CPDMA_TX_PRIORITY_MAP 0x76543210 +#define CPSW_VLAN_AWARE BIT(1) +#define CPSW_ALE_VLAN_AWARE 1 + #define cpsw_enable_irq(priv) \ do { \ u32 i; \ @@ -607,14 +611,40 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) } } +static inline void cpsw_add_default_vlan(struct cpsw_priv *priv) +{ + const int vlan = priv->data.default_vlan; + const int port = priv->host_port; + u32 reg; + int i; + + reg = (priv->version == CPSW_VERSION_1) ? CPSW1_PORT_VLAN : + CPSW2_PORT_VLAN; + + writel(vlan, &priv->host_port_regs->port_vlan); + + for (i = 0; i < 2; i++) + slave_write(priv->slaves + i, vlan, reg); + + cpsw_ale_add_vlan(priv->ale, vlan, ALE_ALL_PORTS << port, + ALE_ALL_PORTS << port, ALE_ALL_PORTS << port, + (ALE_PORT_1 | ALE_PORT_2) << port); +} + static void cpsw_init_host_port(struct cpsw_priv *priv) { + u32 control_reg; + /* soft reset the controller and initialize ale */ soft_reset("cpsw", &priv->regs->soft_reset); cpsw_ale_start(priv->ale); /* switch to vlan unaware mode */ - cpsw_ale_control_set(priv->ale, 0, ALE_VLAN_AWARE, 0); + cpsw_ale_control_set(priv->ale, priv->host_port, ALE_VLAN_AWARE, + CPSW_ALE_VLAN_AWARE); + control_reg = readl(&priv->regs->control); + control_reg |= CPSW_VLAN_AWARE; + writel(control_reg, &priv->regs->control); /* setup host port priority mapping */ __raw_writel(CPDMA_TX_PRIORITY_MAP, @@ -650,6 +680,9 @@ static int cpsw_ndo_open(struct net_device *ndev) cpsw_init_host_port(priv); for_each_slave(priv, cpsw_slave_open, priv); + /* Add default VLAN */ + cpsw_add_default_vlan(priv); + /* setup tx dma to fixed prio and zero offset */ cpdma_control_set(priv->dma, CPDMA_TX_PRIO_FIXED, 1); cpdma_control_set(priv->dma, CPDMA_RX_BUFFER_OFFSET, 0); @@ -933,6 +966,73 @@ static void cpsw_ndo_poll_controller(struct net_device *ndev) } #endif +static inline int cpsw_add_vlan_ale_entry(struct cpsw_priv *priv, + unsigned short vid) +{ + int ret; + + ret = cpsw_ale_add_vlan(priv->ale, vid, + ALE_ALL_PORTS << priv->host_port, + 0, ALE_ALL_PORTS << priv->host_port, + (ALE_PORT_1 | ALE_PORT_2) << priv->host_port); + if (ret != 0) + return ret; + + ret = cpsw_ale_add_ucast(priv->ale, priv->mac_addr, + priv->host_port, ALE_VLAN, vid); + if (ret != 0) + goto clean_vid; + + ret = cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, + ALE_ALL_PORTS << priv->host_port, + ALE_VLAN, vid, 0); + if (ret != 0) + goto clean_vlan_ucast; + return 0; + +clean_vlan_ucast: + cpsw_ale_del_ucast(priv->ale, priv->mac_addr, + priv->host_port, ALE_VLAN, vid); +clean_vid: + cpsw_ale_del_vlan(priv->ale, vid, 0); + return ret; +} + +static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev, + unsigned short vid) +{ + struct cpsw_priv *priv = netdev_priv(ndev); + + if (vid == priv->data.default_vlan) + return 0; + + dev_info(priv->dev, "Adding vlanid %d to vlan filter\n", vid); + return cpsw_add_vlan_ale_entry(priv, vid); +} + +static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev, + unsigned short vid) +{ + struct cpsw_priv *priv = netdev_priv(ndev); + int ret; + + if (vid == priv->data.default_vlan) + return 0; + + dev_info(priv->dev, "removing vlanid %d from vlan filter\n", vid); + ret = cpsw_ale_del_vlan(priv->ale, vid, 0); + if (ret != 0) + return ret; + + ret = cpsw_ale_del_ucast(priv->ale, priv->mac_addr, + priv->host_port, ALE_VLAN, vid); + if (ret != 0) + return ret; + + return cpsw_ale_del_mcast(priv->ale, priv->ndev->broadcast, + 0, ALE_VLAN, vid); +} + static const struct net_device_ops cpsw_netdev_ops = { .ndo_open = cpsw_ndo_open, .ndo_stop = cpsw_ndo_stop, @@ -947,6 +1047,8 @@ static const struct net_device_ops cpsw_netdev_ops = { #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = cpsw_ndo_poll_controller, #endif + .ndo_vlan_rx_add_vid = cpsw_ndo_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = cpsw_ndo_vlan_rx_kill_vid, }; static void cpsw_get_drvinfo(struct net_device *ndev, @@ -1354,7 +1456,7 @@ static int cpsw_probe(struct platform_device *pdev) k++; } - ndev->flags |= IFF_ALLMULTI; /* see cpsw_ndo_change_rx_flags() */ + ndev->features |= NETIF_F_HW_VLAN_FILTER; ndev->netdev_ops = &cpsw_netdev_ops; SET_ETHTOOL_OPS(ndev, &cpsw_ethtool_ops); diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h index a002417..30daa12 100644 --- a/drivers/net/ethernet/ti/cpsw_ale.h +++ b/drivers/net/ethernet/ti/cpsw_ale.h @@ -69,6 +69,10 @@ enum cpsw_ale_port_state { #define ALE_SUPER BIT(2) #define ALE_VLAN BIT(3) +#define ALE_PORT_HOST BIT(0) +#define ALE_PORT_1 BIT(1) +#define ALE_PORT_2 BIT(2) + #define ALE_MCAST_FWD 0 #define ALE_MCAST_BLOCK_LEARN_FWD 1 #define ALE_MCAST_FWD_LEARN 2 diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index 24368a2..e962cfd 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -35,6 +35,7 @@ struct cpsw_platform_data { u32 bd_ram_size; /*buffer descriptor ram size */ u32 rx_descs; /* Number of Rx Descriptios */ u32 mac_control; /* Mac control register */ + u16 default_vlan; /* Def VLAN for ALE lookup in VLAN aware mode*/ }; #endif /* __CPSW_H__ */ -- cgit v0.10.2 From e185483e6b84c127d0b1c890b6b703701ae52d35 Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Tue, 5 Feb 2013 09:30:55 +0000 Subject: team: allow userspace to take control over carrier Some modes don't require any special carrier handling so in these cases, the kernel can control the carrier as for any other interface. However, some other modes, e.g. lacp, requires more than just that, so userspace needs to control the carrier itself. The daemon today is ready to control it, but the kernel still can change it based on events. This fix so that either kernel or userspace is controlling the carrier. Signed-off-by: Flavio Leitner Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 694ccf6..05c5efe 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -508,6 +508,7 @@ static bool team_is_mode_set(struct team *team) static void team_set_no_mode(struct team *team) { + team->user_carrier_enabled = false; team->mode = &__team_no_mode; } @@ -1710,6 +1711,10 @@ static netdev_features_t team_fix_features(struct net_device *dev, static int team_change_carrier(struct net_device *dev, bool new_carrier) { + struct team *team = netdev_priv(dev); + + team->user_carrier_enabled = true; + if (new_carrier) netif_carrier_on(dev); else @@ -2573,6 +2578,9 @@ static void __team_carrier_check(struct team *team) struct team_port *port; bool team_linkup; + if (team->user_carrier_enabled) + return; + team_linkup = false; list_for_each_entry(port, &team->port_list, list) { if (port->linkup) { diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 0245def..4648d80 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -186,6 +186,7 @@ struct team { const struct team_mode *mode; struct team_mode_ops ops; + bool user_carrier_enabled; bool queue_override_enabled; struct list_head *qom_lists; /* array of queue override mapping lists */ long mode_priv[TEAM_MODE_PRIV_LONGS]; -- cgit v0.10.2 From a07fdceccf9d9f1b87f781e9a87662182e590d70 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Feb 2013 15:54:38 -0500 Subject: 6lowpan: Remove __init tag from lowpan_netlink_fini(). It's called from both __init and __exit code, so neither tag is appropriate. Signed-off-by: David S. Miller diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index 09cba81..f62c3b9 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1267,7 +1267,7 @@ static inline int __init lowpan_netlink_init(void) return rtnl_link_register(&lowpan_link_ops); } -static inline void __init lowpan_netlink_fini(void) +static inline void lowpan_netlink_fini(void) { rtnl_link_unregister(&lowpan_link_ops); } -- cgit v0.10.2 From fc4e98dbbaa30ca2180df0b2b0d0608045ed3f19 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Tue, 5 Feb 2013 10:23:43 +0000 Subject: 6lowpan: use stack buffer instead of heap head buffer is only temporary available in lowpan_header_create. So it's not necessary to put it on the heap. Also fixed a comment codestyle issue. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index f62c3b9..43b95ca 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -377,17 +377,14 @@ static int lowpan_header_create(struct sk_buff *skb, struct ipv6hdr *hdr; const u8 *saddr = _saddr; const u8 *daddr = _daddr; - u8 *head; + u8 head[100]; struct ieee802154_addr sa, da; + /* TODO: + * if this package isn't ipv6 one, where should it be routed? + */ if (type != ETH_P_IPV6) return 0; - /* TODO: - * if this package isn't ipv6 one, where should it be routed? - */ - head = kzalloc(100, GFP_KERNEL); - if (head == NULL) - return -ENOMEM; hdr = ipv6_hdr(skb); hc06_ptr = head + 2; @@ -561,8 +558,6 @@ static int lowpan_header_create(struct sk_buff *skb, skb_pull(skb, sizeof(struct ipv6hdr)); memcpy(skb_push(skb, hc06_ptr - head), head, hc06_ptr - head); - kfree(head); - lowpan_raw_dump_table(__func__, "raw skb data dump", skb->data, skb->len); -- cgit v0.10.2 From 25060d8f3f2c21daadb4fc1fb0e37ce2c992e30b Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Tue, 5 Feb 2013 10:23:44 +0000 Subject: wpan: use stack buffer instead of heap head buffer is only temporary available in mac802154_header_create. So it's not necessary to put it on the heap. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller diff --git a/net/mac802154/wpan.c b/net/mac802154/wpan.c index 98c867b..d20c6d3 100644 --- a/net/mac802154/wpan.c +++ b/net/mac802154/wpan.c @@ -137,16 +137,12 @@ static int mac802154_header_create(struct sk_buff *skb, struct ieee802154_addr dev_addr; struct mac802154_sub_if_data *priv = netdev_priv(dev); int pos = 2; - u8 *head; + u8 head[MAC802154_FRAME_HARD_HEADER_LEN]; u16 fc; if (!daddr) return -EINVAL; - head = kzalloc(MAC802154_FRAME_HARD_HEADER_LEN, GFP_KERNEL); - if (head == NULL) - return -ENOMEM; - head[pos++] = mac_cb(skb)->seq; /* DSN/BSN */ fc = mac_cb_type(skb); @@ -210,7 +206,6 @@ static int mac802154_header_create(struct sk_buff *skb, head[1] = fc >> 8; memcpy(skb_push(skb, pos), head, pos); - kfree(head); return pos; } -- cgit v0.10.2 From 12b0004d1d1e2a9aa667412d479041e403bcafae Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 5 Feb 2013 16:36:38 +0000 Subject: net: adjust skb_gso_segment() for calling in rx path skb_gso_segment() is almost always called in tx path, except for openvswitch. It calls this function when it receives the packet and tries to queue it to user-space. In this special case, the ->ip_summed check inside skb_gso_segment() is no longer true, as ->ip_summed value has different meanings on rx path. This patch adjusts skb_gso_segment() so that we can at least avoid such warnings on checksum. Cc: Jesse Gross Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 85b0949..ab2774e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2662,8 +2662,15 @@ extern int netdev_master_upper_dev_link(struct net_device *dev, extern void netdev_upper_dev_unlink(struct net_device *dev, struct net_device *upper_dev); extern int skb_checksum_help(struct sk_buff *skb); -extern struct sk_buff *skb_gso_segment(struct sk_buff *skb, - netdev_features_t features); +extern struct sk_buff *__skb_gso_segment(struct sk_buff *skb, + netdev_features_t features, bool tx_path); + +static inline +struct sk_buff *skb_gso_segment(struct sk_buff *skb, netdev_features_t features) +{ + return __skb_gso_segment(skb, features, true); +} + #ifdef CONFIG_BUG extern void netdev_rx_csum_fault(struct net_device *dev); #else diff --git a/net/core/dev.c b/net/core/dev.c index 2b275a7..65da698 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2327,18 +2327,29 @@ out: } EXPORT_SYMBOL(skb_checksum_help); +/* openvswitch calls this on rx path, so we need a different check. + */ +static inline bool skb_needs_check(struct sk_buff *skb, bool tx_path) +{ + if (tx_path) + return skb->ip_summed != CHECKSUM_PARTIAL; + else + return skb->ip_summed == CHECKSUM_NONE; +} + /** - * skb_gso_segment - Perform segmentation on skb. + * __skb_gso_segment - Perform segmentation on skb. * @skb: buffer to segment * @features: features for the output path (see dev->features) + * @tx_path: whether it is called in TX path * * This function segments the given skb and returns a list of segments. * * It may return NULL if the skb requires no segmentation. This is * only possible when GSO is used for verifying header integrity. */ -struct sk_buff *skb_gso_segment(struct sk_buff *skb, - netdev_features_t features) +struct sk_buff *__skb_gso_segment(struct sk_buff *skb, + netdev_features_t features, bool tx_path) { struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT); struct packet_offload *ptype; @@ -2361,7 +2372,7 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, skb->mac_len = skb->network_header - skb->mac_header; __skb_pull(skb, skb->mac_len); - if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { + if (unlikely(skb_needs_check(skb, tx_path))) { skb_warn_bad_offload(skb); if (skb_header_cloned(skb) && @@ -2390,7 +2401,7 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, return segs; } -EXPORT_SYMBOL(skb_gso_segment); +EXPORT_SYMBOL(__skb_gso_segment); /* Take action when hardware reception checksum errors are detected. */ #ifdef CONFIG_BUG diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index d8c13a9..9dc537d 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -301,7 +301,7 @@ static int queue_gso_packets(struct net *net, int dp_ifindex, struct sk_buff *segs, *nskb; int err; - segs = skb_gso_segment(skb, NETIF_F_SG | NETIF_F_HW_CSUM); + segs = __skb_gso_segment(skb, NETIF_F_SG | NETIF_F_HW_CSUM, false); if (IS_ERR(segs)) return PTR_ERR(segs); -- cgit v0.10.2 From 6d1ccff627806829c46091bd9d9835302a3fbf5f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 5 Feb 2013 20:22:20 +0000 Subject: net: reset mac header in dev_start_xmit() On 64 bit arches : There is a off-by-one error in qdisc_pkt_len_init() because mac_header is not set in xmit path. skb_mac_header() returns an out of bound value that was harmless because hdr_len is an 'unsigned int' On 32bit arches, the error is abysmal. This patch is also a prereq for "macvlan: add multicast filter" Signed-off-by: Eric Dumazet Cc: Ben Greear Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 65da698..2f31bf9 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2835,6 +2835,8 @@ int dev_queue_xmit(struct sk_buff *skb) struct Qdisc *q; int rc = -ENOMEM; + skb_reset_mac_header(skb); + /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ -- cgit v0.10.2 From cd431e738509e74726055390c9e5e81e8e7e03ec Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 5 Feb 2013 20:22:50 +0000 Subject: macvlan: add multicast filter Setting up IPv6 addresses on configurations with many macvlans is not really working, as many multicast messages are dropped. Add a multicast filter to macvlan to reduce the amount of cloned skbs and overhead. Successfully tested with 1024 macvlans on one ethernet device. Signed-off-by: Eric Dumazet Cc: Ben Greear Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 7b44ebd..f494da8 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -126,6 +127,13 @@ static int macvlan_broadcast_one(struct sk_buff *skb, return vlan->receive(skb); } +static unsigned int mc_hash(const unsigned char *addr) +{ + u32 val = __get_unaligned_cpu32(addr + 2); + + return hash_32(val, MACVLAN_MC_FILTER_BITS); +} + static void macvlan_broadcast(struct sk_buff *skb, const struct macvlan_port *port, struct net_device *src, @@ -137,6 +145,7 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; int err; + unsigned int hash = mc_hash(eth->h_dest); if (skb->protocol == htons(ETH_P_PAUSE)) return; @@ -146,6 +155,8 @@ static void macvlan_broadcast(struct sk_buff *skb, if (vlan->dev == src || !(vlan->mode & mode)) continue; + if (!test_bit(hash, vlan->mc_filter)) + continue; nskb = skb_clone(skb, GFP_ATOMIC); err = macvlan_broadcast_one(nskb, vlan, eth, mode == MACVLAN_MODE_BRIDGE); @@ -405,6 +416,18 @@ static void macvlan_set_mac_lists(struct net_device *dev) { struct macvlan_dev *vlan = netdev_priv(dev); + if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) { + bitmap_fill(vlan->mc_filter, MACVLAN_MC_FILTER_SZ); + } else { + struct netdev_hw_addr *ha; + DECLARE_BITMAP(filter, MACVLAN_MC_FILTER_SZ); + + bitmap_zero(filter, MACVLAN_MC_FILTER_SZ); + netdev_for_each_mc_addr(ha, dev) { + __set_bit(mc_hash(ha->addr), filter); + } + bitmap_copy(vlan->mc_filter, filter, MACVLAN_MC_FILTER_SZ); + } dev_uc_sync(vlan->lowerdev, dev); dev_mc_sync(vlan->lowerdev, dev); } diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h index f65e8d2..84dde1d 100644 --- a/include/linux/if_macvlan.h +++ b/include/linux/if_macvlan.h @@ -52,6 +52,9 @@ struct macvlan_pcpu_stats { */ #define MAX_MACVTAP_QUEUES (NR_CPUS < 16 ? NR_CPUS : 16) +#define MACVLAN_MC_FILTER_BITS 8 +#define MACVLAN_MC_FILTER_SZ (1 << MACVLAN_MC_FILTER_BITS) + struct macvlan_dev { struct net_device *dev; struct list_head list; @@ -59,6 +62,9 @@ struct macvlan_dev { struct macvlan_port *port; struct net_device *lowerdev; struct macvlan_pcpu_stats __percpu *pcpu_stats; + + DECLARE_BITMAP(mc_filter, MACVLAN_MC_FILTER_SZ); + enum macvlan_mode mode; u16 flags; int (*receive)(struct sk_buff *skb); -- cgit v0.10.2 From b5a4c2f3d16790516ccd3b924049bab7ec2e50a2 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 6 Feb 2013 04:44:57 +0000 Subject: bgmac: implement missing code for BCM53572 Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 9bd33db..58e0c70 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -889,8 +889,10 @@ static void bgmac_chip_reset(struct bgmac *bgmac) sw_type = et_swtype; } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; - } else if (0) { - /* TODO */ + } else if ((ci->id != BCMA_CHIP_ID_BCM53572 && ci->pkg == 10) || + (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) { + sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII | + BGMAC_CHIPCTL_1_SW_TYPE_RGMII; } bcma_chipco_chipctl_maskset(cc, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h index 1299470..3dd6f6f 100644 --- a/drivers/net/ethernet/broadcom/bgmac.h +++ b/drivers/net/ethernet/broadcom/bgmac.h @@ -339,7 +339,7 @@ #define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000 #define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040 #define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080 -#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0 +#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0 #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 #define BGMAC_SPEED_10 0x0001 -- cgit v0.10.2 From 4e209001b86c53f51980292f0efd1933c0e55d66 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 6 Feb 2013 04:44:58 +0000 Subject: bgmac: write mac address to hardware in ndo_set_mac_address The generic implementation just changes the netdev struct and does not write the new mac address to the hardware or issues some command to do so. Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 58e0c70..c0152396 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -761,6 +761,16 @@ static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, udelay(2); } +static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr) +{ + u32 tmp; + + tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; + bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); + tmp = (addr[4] << 8) | addr[5]; + bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); +} + #if 0 /* We don't use that regs yet */ static void bgmac_chip_stats_update(struct bgmac *bgmac) { @@ -1006,8 +1016,6 @@ static void bgmac_enable(struct bgmac *bgmac) static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) { struct bgmac_dma_ring *ring; - u8 *mac = bgmac->net_dev->dev_addr; - u32 tmp; int i; /* 1 interrupt per received frame */ @@ -1021,11 +1029,7 @@ static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) else bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); - /* Set MAC addr */ - tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); - tmp = (mac[4] << 8) | mac[5]; - bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); + bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr); if (bgmac->loopback) bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); @@ -1162,6 +1166,19 @@ static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb, return bgmac_dma_tx_add(bgmac, ring, skb); } +static int bgmac_set_mac_address(struct net_device *net_dev, void *addr) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + int ret; + + ret = eth_prepare_mac_addr_change(net_dev, addr); + if (ret < 0) + return ret; + bgmac_write_mac_address(bgmac, (u8 *)addr); + eth_commit_mac_addr_change(net_dev, addr); + return 0; +} + static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) { struct bgmac *bgmac = netdev_priv(net_dev); @@ -1192,7 +1209,7 @@ static const struct net_device_ops bgmac_netdev_ops = { .ndo_open = bgmac_open, .ndo_stop = bgmac_stop, .ndo_start_xmit = bgmac_start_xmit, - .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */ + .ndo_set_mac_address = bgmac_set_mac_address, .ndo_do_ioctl = bgmac_ioctl, }; -- cgit v0.10.2 From 522c5907b7223130e906f0d57ad840c952f864a3 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 6 Feb 2013 04:44:59 +0000 Subject: bgmac: add generic ndo_validate_addr netdev ops Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index c0152396..e0775c4 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1210,6 +1210,7 @@ static const struct net_device_ops bgmac_netdev_ops = { .ndo_stop = bgmac_stop, .ndo_start_xmit = bgmac_start_xmit, .ndo_set_mac_address = bgmac_set_mac_address, + .ndo_validate_addr = eth_validate_addr, .ndo_do_ioctl = bgmac_ioctl, }; -- cgit v0.10.2 From c6edfe103b9aacadcd4bb9e8e25cafaefa70a80e Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 6 Feb 2013 05:51:49 +0000 Subject: bgmac: add ndo_set_rx_mode netdev ops When changing the device from or to promisc mode this only affects the device after the device is bought up the next time. For bridging it is needed to change the device to promisc mode while it is up, which is possible with this patch. Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index e0775c4..23c8d4a 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -771,6 +771,16 @@ static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr) bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); } +static void bgmac_set_rx_mode(struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + if (net_dev->flags & IFF_PROMISC) + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); + else + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); +} + #if 0 /* We don't use that regs yet */ static void bgmac_chip_stats_update(struct bgmac *bgmac) { @@ -1024,10 +1034,7 @@ static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) /* Enable 802.3x tx flow control (honor received PAUSE frames) */ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); - if (bgmac->net_dev->flags & IFF_PROMISC) - bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); - else - bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); + bgmac_set_rx_mode(bgmac->net_dev); bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr); @@ -1209,6 +1216,7 @@ static const struct net_device_ops bgmac_netdev_ops = { .ndo_open = bgmac_open, .ndo_stop = bgmac_stop, .ndo_start_xmit = bgmac_start_xmit, + .ndo_set_rx_mode = bgmac_set_rx_mode, .ndo_set_mac_address = bgmac_set_mac_address, .ndo_validate_addr = eth_validate_addr, .ndo_do_ioctl = bgmac_ioctl, -- cgit v0.10.2 From 79aeaccd915c527a75f2cb01682eab160bed4f48 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:19 +0000 Subject: net/mlx4_en: Optimize loopback related checks in data path Currently there are relatively complex conditional checks in the fast path, for TX loopback enabling and resulting RX filter logic. Move elaborate if's out of data path, replace them with a single flag for each state and update that state from appropriate places. Also, in native (non SRIOV) mode and not in loopback or in selftest, there is no need to try and filter out packets that HW loopback-ed, as in native mode we do not loopback packets anymore. Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index f3c7961..e3c3d12 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -95,6 +95,28 @@ int en_print(const char *level, const struct mlx4_en_priv *priv, return i; } +void mlx4_en_update_loopback_state(struct net_device *dev, + netdev_features_t features) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + priv->flags &= ~(MLX4_EN_FLAG_RX_FILTER_NEEDED| + MLX4_EN_FLAG_ENABLE_HW_LOOPBACK); + + /* Drop the packet if SRIOV is not enabled + * and not performing the selftest or flb disabled + */ + if (mlx4_is_mfunc(priv->mdev->dev) && + !(features & NETIF_F_LOOPBACK) && !priv->validate_loopback) + priv->flags |= MLX4_EN_FLAG_RX_FILTER_NEEDED; + + /* Set dmac in Tx WQE if we are in SRIOV mode or if loopback selftest + * is requested + */ + if (mlx4_is_mfunc(priv->mdev->dev) || priv->validate_loopback) + priv->flags |= MLX4_EN_FLAG_ENABLE_HW_LOOPBACK; +} + static int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index ac1c14f..551ef68 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1563,6 +1563,8 @@ static int mlx4_en_set_features(struct net_device *netdev, priv->ctrl_flags &= cpu_to_be32(~MLX4_WQE_CTRL_FORCE_LOOPBACK); + mlx4_en_update_loopback_state(netdev, features); + return 0; } @@ -1731,6 +1733,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, en_warn(priv, "Using %d TX rings\n", prof->tx_ring_num); en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num); + mlx4_en_update_loopback_state(priv->dev, priv->dev->features); + /* Configure port */ mlx4_en_calc_rx_buf(dev); err = mlx4_SET_PORT_general(mdev->dev, priv->port, diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index fed26d8..ed214d0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -563,9 +563,6 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud unsigned int length; int polled = 0; int ip_summed; - struct ethhdr *ethh; - dma_addr_t dma; - u64 s_mac; int factor = priv->cqe_factor; if (!priv->port_up) @@ -603,21 +600,27 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud goto next; } - /* Get pointer to first fragment since we haven't skb yet and - * cast it to ethhdr struct */ - dma = be64_to_cpu(rx_desc->data[0].addr); - dma_sync_single_for_cpu(priv->ddev, dma, sizeof(*ethh), - DMA_FROM_DEVICE); - ethh = (struct ethhdr *)(page_address(frags[0].page) + - frags[0].offset); - s_mac = mlx4_en_mac_to_u64(ethh->h_source); - - /* If source MAC is equal to our own MAC and not performing - * the selftest or flb disabled - drop the packet */ - if (s_mac == priv->mac && - !((dev->features & NETIF_F_LOOPBACK) || - priv->validate_loopback)) - goto next; + /* Check if we need to drop the packet if SRIOV is not enabled + * and not performing the selftest or flb disabled + */ + if (priv->flags & MLX4_EN_FLAG_RX_FILTER_NEEDED) { + struct ethhdr *ethh; + dma_addr_t dma; + u64 s_mac; + /* Get pointer to first fragment since we haven't + * skb yet and cast it to ethhdr struct + */ + dma = be64_to_cpu(rx_desc->data[0].addr); + dma_sync_single_for_cpu(priv->ddev, dma, sizeof(*ethh), + DMA_FROM_DEVICE); + ethh = (struct ethhdr *)(page_address(frags[0].page) + + frags[0].offset); + + /* Drop the packet, since HW loopback-ed it */ + s_mac = mlx4_en_mac_to_u64(ethh->h_source); + if (s_mac == priv->mac) + goto next; + } /* * Packet is OK - process it. diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c index bf2e5d3..3488c6d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c @@ -87,6 +87,8 @@ static int mlx4_en_test_loopback(struct mlx4_en_priv *priv) priv->loopback_ok = 0; priv->validate_loopback = 1; + mlx4_en_update_loopback_state(priv->dev, priv->dev->features); + /* xmit */ if (mlx4_en_test_loopback_xmit(priv)) { en_err(priv, "Transmitting loopback packet failed\n"); @@ -107,6 +109,7 @@ static int mlx4_en_test_loopback(struct mlx4_en_priv *priv) mlx4_en_test_loopback_exit: priv->validate_loopback = 0; + mlx4_en_update_loopback_state(priv->dev, priv->dev->features); return !loopback_ok; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 30724d8..3b28e16 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -640,7 +640,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->tx_csum++; } - if (mlx4_is_mfunc(mdev->dev) || priv->validate_loopback) { + if (priv->flags & MLX4_EN_FLAG_ENABLE_HW_LOOPBACK) { /* Copy dst mac address to wqe. This allows loopback in eSwitch, * so that VFs and PF can communicate with each other */ diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 43f0165..696dcf3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -432,6 +432,17 @@ struct ethtool_flow_id { u64 id; }; +enum { + MLX4_EN_FLAG_PROMISC = (1 << 0), + MLX4_EN_FLAG_MC_PROMISC = (1 << 1), + /* whether we need to enable hardware loopback by putting dmac + * in Tx WQE + */ + MLX4_EN_FLAG_ENABLE_HW_LOOPBACK = (1 << 2), + /* whether we need to drop packets that hardware loopback-ed */ + MLX4_EN_FLAG_RX_FILTER_NEEDED = (1 << 3) +}; + struct mlx4_en_priv { struct mlx4_en_dev *mdev; struct mlx4_en_port_profile *prof; @@ -481,8 +492,6 @@ struct mlx4_en_priv { struct mlx4_en_rss_map rss_map; __be32 ctrl_flags; u32 flags; -#define MLX4_EN_FLAG_PROMISC 0x1 -#define MLX4_EN_FLAG_MC_PROMISC 0x2 u8 num_tx_rings_p_up; u32 tx_ring_num; u32 rx_ring_num; @@ -534,6 +543,9 @@ enum mlx4_en_wol { #define MLX4_EN_WOL_DO_MODIFY (1ULL << 63) +void mlx4_en_update_loopback_state(struct net_device *dev, + netdev_features_t features); + void mlx4_en_destroy_netdev(struct net_device *dev); int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_port_profile *prof); -- cgit v0.10.2 From 6bbb6d99f3d2653e634657ea0d85ef4c0fc49463 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:20 +0000 Subject: net/mlx4_en: Optimize Rx fast path filter checks Currently, RX path code that does RX filtering is not optimized and does an expensive conversion. In order to use ether_addr_equal_64bits which is optimized for such cases, we need the MAC address kept by the device to be in the form of unsigned char array instead of u64. Store the MAC address as unsigned char array and convert to/from u64 out of the fast path when needed. Side effect of this is that we no longer need priv->mac, since it's the same as dev->dev_addr. This optimization was suggested by Eric Dumazet Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index f523f02..8a08c5e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -712,16 +712,13 @@ static int mlx4_en_ethtool_add_mac_rule_by_ipv4(struct mlx4_en_priv *priv, __be32 ipv4_dst) { #ifdef CONFIG_INET - __be64 be_mac = 0; unsigned char mac[ETH_ALEN]; if (!ipv4_is_multicast(ipv4_dst)) { - if (cmd->fs.flow_type & FLOW_MAC_EXT) { + if (cmd->fs.flow_type & FLOW_MAC_EXT) memcpy(&mac, cmd->fs.h_ext.h_dest, ETH_ALEN); - } else { - be_mac = cpu_to_be64((priv->mac & MLX4_MAC_MASK) << 16); - memcpy(&mac, &be_mac, ETH_ALEN); - } + else + memcpy(&mac, priv->dev->dev_addr, ETH_ALEN); } else { ip_eth_mc_map(ipv4_dst, mac); } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 551ef68..f7338cb 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -132,17 +132,14 @@ static void mlx4_en_filter_work(struct work_struct *work) .priority = MLX4_DOMAIN_RFS, }; int rc; - __be64 mac; __be64 mac_mask = cpu_to_be64(MLX4_MAC_MASK << 16); list_add_tail(&spec_eth.list, &rule.list); list_add_tail(&spec_ip.list, &rule.list); list_add_tail(&spec_tcp.list, &rule.list); - mac = cpu_to_be64((priv->mac & MLX4_MAC_MASK) << 16); - rule.qpn = priv->rss_map.qps[filter->rxq_index].qpn; - memcpy(spec_eth.eth.dst_mac, &mac, ETH_ALEN); + memcpy(spec_eth.eth.dst_mac, priv->dev->dev_addr, ETH_ALEN); memcpy(spec_eth.eth.dst_mac_msk, &mac_mask, ETH_ALEN); filter->activated = 0; @@ -413,6 +410,16 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) return 0; } +static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) +{ + unsigned int i; + for (i = ETH_ALEN - 1; i; --i) { + dst_mac[i] = src_mac & 0xff; + src_mac >>= 8; + } + memset(&dst_mac[ETH_ALEN], 0, 2); +} + u64 mlx4_en_mac_to_u64(u8 *addr) { u64 mac = 0; @@ -435,7 +442,6 @@ static int mlx4_en_set_mac(struct net_device *dev, void *addr) return -EADDRNOTAVAIL; memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN); - priv->mac = mlx4_en_mac_to_u64(dev->dev_addr); queue_work(mdev->workqueue, &priv->mac_task); return 0; } @@ -450,10 +456,13 @@ static void mlx4_en_do_set_mac(struct work_struct *work) mutex_lock(&mdev->state_lock); if (priv->port_up) { /* Remove old MAC and insert the new one */ + u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); err = mlx4_replace_mac(mdev->dev, priv->port, - priv->base_qpn, priv->mac); + priv->base_qpn, mac); if (err) en_err(priv, "Failed changing HW MAC address\n"); + memcpy(priv->prev_mac, priv->dev->dev_addr, + sizeof(priv->prev_mac)); } else en_dbg(HW, priv, "Port is down while " "registering mac, exiting...\n"); @@ -1031,6 +1040,7 @@ int mlx4_en_start_port(struct net_device *dev) int i; int j; u8 mc_list[16] = {0}; + u64 mac = mlx4_en_mac_to_u64(dev->dev_addr); if (priv->port_up) { en_dbg(DRV, priv, "start port called while port already up\n"); @@ -1078,7 +1088,7 @@ int mlx4_en_start_port(struct net_device *dev) /* Set qp number */ en_dbg(DRV, priv, "Getting qp number for port %d\n", priv->port); err = mlx4_get_eth_qp(mdev->dev, priv->port, - priv->mac, &priv->base_qpn); + mac, &priv->base_qpn); if (err) { en_err(priv, "Failed getting eth qp\n"); goto cq_err; @@ -1191,7 +1201,7 @@ tx_err: rss_err: mlx4_en_release_rss_steer(priv); mac_err: - mlx4_put_eth_qp(mdev->dev, priv->port, priv->mac, priv->base_qpn); + mlx4_put_eth_qp(mdev->dev, priv->port, mac, priv->base_qpn); cq_err: while (rx_index--) mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); @@ -1210,6 +1220,7 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) struct ethtool_flow_id *flow, *tmp_flow; int i; u8 mc_list[16] = {0}; + u64 mac = mlx4_en_mac_to_u64(dev->dev_addr); if (!priv->port_up) { en_dbg(DRV, priv, "stop port called while port already down\n"); @@ -1290,7 +1301,7 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) mlx4_en_release_rss_steer(priv); /* Unregister Mac address for the port */ - mlx4_put_eth_qp(mdev->dev, priv->port, priv->mac, priv->base_qpn); + mlx4_put_eth_qp(mdev->dev, priv->port, mac, priv->base_qpn); if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN)) mdev->mac_removed[priv->port] = 1; @@ -1597,7 +1608,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, { struct net_device *dev; struct mlx4_en_priv *priv; - int i; int err; dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), @@ -1658,14 +1668,19 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, /* Query for default mac and max mtu */ priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port]; - priv->mac = mdev->dev->caps.def_mac[priv->port]; - if (ILLEGAL_MAC(priv->mac)) { - en_err(priv, "Port: %d, invalid mac burned: 0x%llx, quiting\n", - priv->port, priv->mac); + + /* Set default MAC */ + dev->addr_len = ETH_ALEN; + mlx4_en_u64_to_mac(dev->dev_addr, mdev->dev->caps.def_mac[priv->port]); + if (!is_valid_ether_addr(dev->dev_addr)) { + en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", + priv->port, dev->dev_addr); err = -EINVAL; goto out; } + memcpy(priv->prev_mac, dev->dev_addr, sizeof(priv->prev_mac)); + priv->stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + DS_SIZE * MLX4_EN_MAX_RX_FRAGS); err = mlx4_en_alloc_resources(priv); @@ -1696,11 +1711,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops); - /* Set defualt MAC */ - dev->addr_len = ETH_ALEN; - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[ETH_ALEN - 1 - i] = (u8) (priv->mac >> (8 * i)); - /* * Set driver features */ diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index ed214d0..2e7f5bb 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -606,7 +606,6 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud if (priv->flags & MLX4_EN_FLAG_RX_FILTER_NEEDED) { struct ethhdr *ethh; dma_addr_t dma; - u64 s_mac; /* Get pointer to first fragment since we haven't * skb yet and cast it to ethhdr struct */ @@ -617,8 +616,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud frags[0].offset); /* Drop the packet, since HW loopback-ed it */ - s_mac = mlx4_en_mac_to_u64(ethh->h_source); - if (s_mac == priv->mac) + if (ether_addr_equal_64bits(dev->dev_addr, + ethh->h_source)) goto next; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 696dcf3..9d0105d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -198,7 +198,6 @@ enum cq_type { */ #define ROUNDUP_LOG2(x) ilog2(roundup_pow_of_two(x)) #define XNOR(x, y) (!(x) == !(y)) -#define ILLEGAL_MAC(addr) (addr == 0xffffffffffffULL || addr == 0x0) struct mlx4_en_tx_info { @@ -483,7 +482,7 @@ struct mlx4_en_priv { int registered; int allocated; int stride; - u64 mac; + unsigned char prev_mac[ETH_ALEN + 2]; int mac_index; unsigned max_mtu; int base_qpn; -- cgit v0.10.2 From 48e551ff3da5084371bbca93380368ee18050c9e Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:21 +0000 Subject: net/mlx4_en: Cleanup multiline strings Make the code consistent in regard to error messages not spanning multiple lines. Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index f7338cb..0843dd7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -464,8 +464,7 @@ static void mlx4_en_do_set_mac(struct work_struct *work) memcpy(priv->prev_mac, priv->dev->dev_addr, sizeof(priv->prev_mac)); } else - en_dbg(HW, priv, "Port is down while " - "registering mac, exiting...\n"); + en_dbg(HW, priv, "Port is down while registering mac, exiting...\n"); mutex_unlock(&mdev->state_lock); } @@ -572,13 +571,11 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) mutex_lock(&mdev->state_lock); if (!mdev->device_up) { - en_dbg(HW, priv, "Card is not up, " - "ignoring multicast change.\n"); + en_dbg(HW, priv, "Card is not up, ignoring multicast change.\n"); goto out; } if (!priv->port_up) { - en_dbg(HW, priv, "Port is down, " - "ignoring multicast change.\n"); + en_dbg(HW, priv, "Port is down, ignoring multicast change.\n"); goto out; } @@ -648,8 +645,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, 0, MLX4_MCAST_DISABLE); if (err) - en_err(priv, "Failed disabling " - "multicast filter\n"); + en_err(priv, "Failed disabling multicast filter\n"); /* Disable port VLAN filter */ err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); @@ -885,9 +881,8 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv) priv->rx_usecs = MLX4_EN_RX_COAL_TIME; priv->tx_frames = MLX4_EN_TX_COAL_PKTS; priv->tx_usecs = MLX4_EN_TX_COAL_TIME; - en_dbg(INTR, priv, "Default coalesing params for mtu:%d - " - "rx_frames:%d rx_usecs:%d\n", - priv->dev->mtu, priv->rx_frames, priv->rx_usecs); + en_dbg(INTR, priv, "Default coalesing params for mtu:%d - rx_frames:%d rx_usecs:%d\n", + priv->dev->mtu, priv->rx_frames, priv->rx_usecs); /* Setup cq moderation params */ for (i = 0; i < priv->rx_ring_num; i++) { @@ -968,8 +963,8 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) cq->moder_time = moder_time; err = mlx4_en_set_cq_moder(priv, cq); if (err) - en_err(priv, "Failed modifying moderation " - "for cq:%d\n", ring); + en_err(priv, "Failed modifying moderation for cq:%d\n", + ring); } priv->last_moder_packets[ring] = rx_packets; priv->last_moder_bytes[ring] = rx_bytes; @@ -1151,8 +1146,8 @@ int mlx4_en_start_port(struct net_device *dev) priv->prof->rx_pause, priv->prof->rx_ppp); if (err) { - en_err(priv, "Failed setting port general configurations " - "for port %d, with error %d\n", priv->port, err); + en_err(priv, "Failed setting port general configurations for port %d, with error %d\n", + priv->port, err); goto tx_err; } /* Set default qp number */ -- cgit v0.10.2 From 16a10ffd20a13215243bdba64c8e57ef277a55b9 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:22 +0000 Subject: net/mlx4: Move Ethernet related functionality from mlx4_core to mlx4_en Move low level code that deals with management of Ethernet MACs and QPs from mlx4_core to mlx4_en. Also convert the new functions to deal with MACs in form of char array instead of u64. Actual functions moved: mlx4_replace_mac mlx4_get_eth_qp mlx4_put_eth_qp To conduct this change, some functionality had to be exported from the core, the following functions were added: mlx4_get_base_qp __mlx4_replace_mac (low level function for CX1/A0 compatibility) Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 0843dd7..63a1ef3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -420,6 +420,206 @@ static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) memset(&dst_mac[ETH_ALEN], 0, 2); } +static int mlx4_en_uc_steer_add(struct mlx4_en_priv *priv, + unsigned char *mac, int *qpn, u64 *reg_id) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_dev *dev = mdev->dev; + int err; + + switch (dev->caps.steering_mode) { + case MLX4_STEERING_MODE_B0: { + struct mlx4_qp qp; + u8 gid[16] = {0}; + + qp.qpn = *qpn; + memcpy(&gid[10], mac, ETH_ALEN); + gid[5] = priv->port; + + err = mlx4_unicast_attach(dev, &qp, gid, 0, MLX4_PROT_ETH); + break; + } + case MLX4_STEERING_MODE_DEVICE_MANAGED: { + struct mlx4_spec_list spec_eth = { {NULL} }; + __be64 mac_mask = cpu_to_be64(MLX4_MAC_MASK << 16); + + struct mlx4_net_trans_rule rule = { + .queue_mode = MLX4_NET_TRANS_Q_FIFO, + .exclusive = 0, + .allow_loopback = 1, + .promisc_mode = MLX4_FS_PROMISC_NONE, + .priority = MLX4_DOMAIN_NIC, + }; + + rule.port = priv->port; + rule.qpn = *qpn; + INIT_LIST_HEAD(&rule.list); + + spec_eth.id = MLX4_NET_TRANS_RULE_ID_ETH; + memcpy(spec_eth.eth.dst_mac, mac, ETH_ALEN); + memcpy(spec_eth.eth.dst_mac_msk, &mac_mask, ETH_ALEN); + list_add_tail(&spec_eth.list, &rule.list); + + err = mlx4_flow_attach(dev, &rule, reg_id); + break; + } + default: + return -EINVAL; + } + if (err) + en_warn(priv, "Failed Attaching Unicast\n"); + + return err; +} + +static void mlx4_en_uc_steer_release(struct mlx4_en_priv *priv, + unsigned char *mac, int qpn, u64 reg_id) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_dev *dev = mdev->dev; + + switch (dev->caps.steering_mode) { + case MLX4_STEERING_MODE_B0: { + struct mlx4_qp qp; + u8 gid[16] = {0}; + + qp.qpn = qpn; + memcpy(&gid[10], mac, ETH_ALEN); + gid[5] = priv->port; + + mlx4_unicast_detach(dev, &qp, gid, MLX4_PROT_ETH); + break; + } + case MLX4_STEERING_MODE_DEVICE_MANAGED: { + mlx4_flow_detach(dev, reg_id); + break; + } + default: + en_err(priv, "Invalid steering mode.\n"); + } +} + +static int mlx4_en_get_qp(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_dev *dev = mdev->dev; + struct mlx4_mac_entry *entry; + int index = 0; + int err = 0; + u64 reg_id; + int *qpn = &priv->base_qpn; + u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); + + en_dbg(DRV, priv, "Registering MAC: %pM for adding\n", + priv->dev->dev_addr); + index = mlx4_register_mac(dev, priv->port, mac); + if (index < 0) { + err = index; + en_err(priv, "Failed adding MAC: %pM\n", + priv->dev->dev_addr); + return err; + } + + if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) { + int base_qpn = mlx4_get_base_qpn(dev, priv->port); + *qpn = base_qpn + index; + return 0; + } + + err = mlx4_qp_reserve_range(dev, 1, 1, qpn); + en_dbg(DRV, priv, "Reserved qp %d\n", *qpn); + if (err) { + en_err(priv, "Failed to reserve qp for mac registration\n"); + goto qp_err; + } + + err = mlx4_en_uc_steer_add(priv, priv->dev->dev_addr, qpn, ®_id); + if (err) + goto steer_err; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + err = -ENOMEM; + goto alloc_err; + } + memcpy(entry->mac, priv->dev->dev_addr, sizeof(entry->mac)); + entry->reg_id = reg_id; + + err = radix_tree_insert(&priv->mac_tree, *qpn, entry); + if (err) + goto insert_err; + return 0; + +insert_err: + kfree(entry); + +alloc_err: + mlx4_en_uc_steer_release(priv, priv->dev->dev_addr, *qpn, reg_id); + +steer_err: + mlx4_qp_release_range(dev, *qpn, 1); + +qp_err: + mlx4_unregister_mac(dev, priv->port, mac); + return err; +} + +static void mlx4_en_put_qp(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_dev *dev = mdev->dev; + struct mlx4_mac_entry *entry; + int qpn = priv->base_qpn; + u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); + + en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n", + priv->dev->dev_addr); + mlx4_unregister_mac(dev, priv->port, mac); + + if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { + entry = radix_tree_lookup(&priv->mac_tree, qpn); + if (entry) { + en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n", + priv->port, entry->mac, qpn); + mlx4_en_uc_steer_release(priv, entry->mac, + qpn, entry->reg_id); + mlx4_qp_release_range(dev, qpn, 1); + radix_tree_delete(&priv->mac_tree, qpn); + kfree(entry); + } + } +} + +static int mlx4_en_replace_mac(struct mlx4_en_priv *priv, int qpn, + unsigned char *new_mac) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_dev *dev = mdev->dev; + struct mlx4_mac_entry *entry; + int err = 0; + u64 new_mac_u64 = mlx4_en_mac_to_u64(new_mac); + + if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { + u64 prev_mac_u64; + + entry = radix_tree_lookup(&priv->mac_tree, qpn); + if (!entry) + return -EINVAL; + prev_mac_u64 = mlx4_en_mac_to_u64(entry->mac); + mlx4_en_uc_steer_release(priv, entry->mac, + qpn, entry->reg_id); + mlx4_unregister_mac(dev, priv->port, prev_mac_u64); + memcpy(entry->mac, new_mac, ETH_ALEN); + entry->reg_id = 0; + mlx4_register_mac(dev, priv->port, new_mac_u64); + err = mlx4_en_uc_steer_add(priv, new_mac, + &qpn, &entry->reg_id); + return err; + } + + return __mlx4_replace_mac(dev, priv->port, qpn, new_mac_u64); +} + u64 mlx4_en_mac_to_u64(u8 *addr) { u64 mac = 0; @@ -456,9 +656,8 @@ static void mlx4_en_do_set_mac(struct work_struct *work) mutex_lock(&mdev->state_lock); if (priv->port_up) { /* Remove old MAC and insert the new one */ - u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); - err = mlx4_replace_mac(mdev->dev, priv->port, - priv->base_qpn, mac); + err = mlx4_en_replace_mac(priv, priv->base_qpn, + priv->dev->dev_addr); if (err) en_err(priv, "Failed changing HW MAC address\n"); memcpy(priv->prev_mac, priv->dev->dev_addr, @@ -1035,7 +1234,6 @@ int mlx4_en_start_port(struct net_device *dev) int i; int j; u8 mc_list[16] = {0}; - u64 mac = mlx4_en_mac_to_u64(dev->dev_addr); if (priv->port_up) { en_dbg(DRV, priv, "start port called while port already up\n"); @@ -1082,8 +1280,7 @@ int mlx4_en_start_port(struct net_device *dev) /* Set qp number */ en_dbg(DRV, priv, "Getting qp number for port %d\n", priv->port); - err = mlx4_get_eth_qp(mdev->dev, priv->port, - mac, &priv->base_qpn); + err = mlx4_en_get_qp(priv); if (err) { en_err(priv, "Failed getting eth qp\n"); goto cq_err; @@ -1196,7 +1393,7 @@ tx_err: rss_err: mlx4_en_release_rss_steer(priv); mac_err: - mlx4_put_eth_qp(mdev->dev, priv->port, mac, priv->base_qpn); + mlx4_en_put_qp(priv); cq_err: while (rx_index--) mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); @@ -1215,7 +1412,6 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) struct ethtool_flow_id *flow, *tmp_flow; int i; u8 mc_list[16] = {0}; - u64 mac = mlx4_en_mac_to_u64(dev->dev_addr); if (!priv->port_up) { en_dbg(DRV, priv, "stop port called while port already down\n"); @@ -1296,7 +1492,7 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) mlx4_en_release_rss_steer(priv); /* Unregister Mac address for the port */ - mlx4_put_eth_qp(mdev->dev, priv->port, mac, priv->base_qpn); + mlx4_en_put_qp(priv); if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN)) mdev->mac_removed[priv->port] = 1; @@ -1661,6 +1857,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->dcbnl_ops = &mlx4_en_dcbnl_ops; #endif + INIT_RADIX_TREE(&priv->mac_tree, GFP_KERNEL); + /* Query for default mac and max mtu */ priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port]; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 12ddae6..2d7b937 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1833,12 +1833,9 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port) info->dev = dev; info->port = port; if (!mlx4_is_slave(dev)) { - INIT_RADIX_TREE(&info->mac_tree, GFP_KERNEL); mlx4_init_mac_table(dev, &info->mac_table); mlx4_init_vlan_table(dev, &info->vlan_table); - info->base_qpn = - dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] + - (port - 1) * (1 << log_num_mac); + info->base_qpn = mlx4_get_base_qpn(dev, port); } sprintf(info->dev_name, "mlx4_port%d", port); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 172daaa..ed4a695 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -653,11 +653,6 @@ struct mlx4_set_port_rqp_calc_context { __be32 mcast; }; -struct mlx4_mac_entry { - u64 mac; - u64 reg_id; -}; - struct mlx4_port_info { struct mlx4_dev *dev; int port; @@ -667,7 +662,6 @@ struct mlx4_port_info { char dev_mtu_name[16]; struct device_attribute port_mtu_attr; struct mlx4_mac_table mac_table; - struct radix_tree_root mac_tree; struct mlx4_vlan_table vlan_table; int base_qpn; }; @@ -916,7 +910,6 @@ int __mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, void __mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt); int __mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac); void __mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac); -int __mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac); int __mlx4_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt, int start_index, int npages, u64 *page_list); int __mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 9d0105d..84ed3285 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -521,6 +521,7 @@ struct mlx4_en_priv { bool wol; struct device *ddev; int base_tx_qpn; + struct radix_tree_root mac_tree; #ifdef CONFIG_MLX4_EN_DCB struct ieee_ets ets; @@ -540,6 +541,11 @@ enum mlx4_en_wol { MLX4_EN_WOL_ENABLED = (1ULL << 62), }; +struct mlx4_mac_entry { + unsigned char mac[ETH_ALEN + 2]; + u64 reg_id; +}; + #define MLX4_EN_WOL_DO_MODIFY (1ULL << 63) void mlx4_en_update_loopback_state(struct net_device *dev, diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 4c51b05..719ead1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -74,87 +74,6 @@ void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table) table->total = 0; } -static int mlx4_uc_steer_add(struct mlx4_dev *dev, u8 port, - u64 mac, int *qpn, u64 *reg_id) -{ - __be64 be_mac; - int err; - - mac &= MLX4_MAC_MASK; - be_mac = cpu_to_be64(mac << 16); - - switch (dev->caps.steering_mode) { - case MLX4_STEERING_MODE_B0: { - struct mlx4_qp qp; - u8 gid[16] = {0}; - - qp.qpn = *qpn; - memcpy(&gid[10], &be_mac, ETH_ALEN); - gid[5] = port; - - err = mlx4_unicast_attach(dev, &qp, gid, 0, MLX4_PROT_ETH); - break; - } - case MLX4_STEERING_MODE_DEVICE_MANAGED: { - struct mlx4_spec_list spec_eth = { {NULL} }; - __be64 mac_mask = cpu_to_be64(MLX4_MAC_MASK << 16); - - struct mlx4_net_trans_rule rule = { - .queue_mode = MLX4_NET_TRANS_Q_FIFO, - .exclusive = 0, - .allow_loopback = 1, - .promisc_mode = MLX4_FS_PROMISC_NONE, - .priority = MLX4_DOMAIN_NIC, - }; - - rule.port = port; - rule.qpn = *qpn; - INIT_LIST_HEAD(&rule.list); - - spec_eth.id = MLX4_NET_TRANS_RULE_ID_ETH; - memcpy(spec_eth.eth.dst_mac, &be_mac, ETH_ALEN); - memcpy(spec_eth.eth.dst_mac_msk, &mac_mask, ETH_ALEN); - list_add_tail(&spec_eth.list, &rule.list); - - err = mlx4_flow_attach(dev, &rule, reg_id); - break; - } - default: - return -EINVAL; - } - if (err) - mlx4_warn(dev, "Failed Attaching Unicast\n"); - - return err; -} - -static void mlx4_uc_steer_release(struct mlx4_dev *dev, u8 port, - u64 mac, int qpn, u64 reg_id) -{ - switch (dev->caps.steering_mode) { - case MLX4_STEERING_MODE_B0: { - struct mlx4_qp qp; - u8 gid[16] = {0}; - __be64 be_mac; - - qp.qpn = qpn; - mac &= MLX4_MAC_MASK; - be_mac = cpu_to_be64(mac << 16); - memcpy(&gid[10], &be_mac, ETH_ALEN); - gid[5] = port; - - mlx4_unicast_detach(dev, &qp, gid, MLX4_PROT_ETH); - break; - } - case MLX4_STEERING_MODE_DEVICE_MANAGED: { - mlx4_flow_detach(dev, reg_id); - break; - } - default: - mlx4_err(dev, "Invalid steering mode.\n"); - } -} - static int validate_index(struct mlx4_dev *dev, struct mlx4_mac_table *table, int index) { @@ -181,92 +100,6 @@ static int find_index(struct mlx4_dev *dev, return -EINVAL; } -int mlx4_get_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn) -{ - struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; - struct mlx4_mac_entry *entry; - int index = 0; - int err = 0; - u64 reg_id; - - mlx4_dbg(dev, "Registering MAC: 0x%llx for adding\n", - (unsigned long long) mac); - index = mlx4_register_mac(dev, port, mac); - if (index < 0) { - err = index; - mlx4_err(dev, "Failed adding MAC: 0x%llx\n", - (unsigned long long) mac); - return err; - } - - if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) { - *qpn = info->base_qpn + index; - return 0; - } - - err = mlx4_qp_reserve_range(dev, 1, 1, qpn); - mlx4_dbg(dev, "Reserved qp %d\n", *qpn); - if (err) { - mlx4_err(dev, "Failed to reserve qp for mac registration\n"); - goto qp_err; - } - - err = mlx4_uc_steer_add(dev, port, mac, qpn, ®_id); - if (err) - goto steer_err; - - entry = kmalloc(sizeof *entry, GFP_KERNEL); - if (!entry) { - err = -ENOMEM; - goto alloc_err; - } - entry->mac = mac; - entry->reg_id = reg_id; - err = radix_tree_insert(&info->mac_tree, *qpn, entry); - if (err) - goto insert_err; - return 0; - -insert_err: - kfree(entry); - -alloc_err: - mlx4_uc_steer_release(dev, port, mac, *qpn, reg_id); - -steer_err: - mlx4_qp_release_range(dev, *qpn, 1); - -qp_err: - mlx4_unregister_mac(dev, port, mac); - return err; -} -EXPORT_SYMBOL_GPL(mlx4_get_eth_qp); - -void mlx4_put_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int qpn) -{ - struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; - struct mlx4_mac_entry *entry; - - mlx4_dbg(dev, "Registering MAC: 0x%llx for deleting\n", - (unsigned long long) mac); - mlx4_unregister_mac(dev, port, mac); - - if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { - entry = radix_tree_lookup(&info->mac_tree, qpn); - if (entry) { - mlx4_dbg(dev, "Releasing qp: port %d, mac 0x%llx," - " qpn %d\n", port, - (unsigned long long) mac, qpn); - mlx4_uc_steer_release(dev, port, entry->mac, - qpn, entry->reg_id); - mlx4_qp_release_range(dev, qpn, 1); - radix_tree_delete(&info->mac_tree, qpn); - kfree(entry); - } - } -} -EXPORT_SYMBOL_GPL(mlx4_put_eth_qp); - static int mlx4_set_port_mac_table(struct mlx4_dev *dev, u8 port, __be64 *entries) { @@ -359,6 +192,12 @@ int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac) } EXPORT_SYMBOL_GPL(mlx4_register_mac); +int mlx4_get_base_qpn(struct mlx4_dev *dev, u8 port) +{ + return dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] + + (port - 1) * (1 << dev->caps.log_num_macs); +} +EXPORT_SYMBOL_GPL(mlx4_get_base_qpn); void __mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac) { @@ -397,29 +236,13 @@ void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac) } EXPORT_SYMBOL_GPL(mlx4_unregister_mac); -int mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac) +int __mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac) { struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; struct mlx4_mac_table *table = &info->mac_table; - struct mlx4_mac_entry *entry; int index = qpn - info->base_qpn; int err = 0; - if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { - entry = radix_tree_lookup(&info->mac_tree, qpn); - if (!entry) - return -EINVAL; - mlx4_uc_steer_release(dev, port, entry->mac, - qpn, entry->reg_id); - mlx4_unregister_mac(dev, port, entry->mac); - entry->mac = new_mac; - entry->reg_id = 0; - mlx4_register_mac(dev, port, new_mac); - err = mlx4_uc_steer_add(dev, port, entry->mac, - &qpn, &entry->reg_id); - return err; - } - /* CX1 doesn't support multi-functions */ mutex_lock(&table->mutex); @@ -439,7 +262,7 @@ out: mutex_unlock(&table->mutex); return err; } -EXPORT_SYMBOL_GPL(mlx4_replace_mac); +EXPORT_SYMBOL_GPL(__mlx4_replace_mac); static int mlx4_set_port_vlan_table(struct mlx4_dev *dev, u8 port, __be32 *entries) diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 1883e8e..6d48fce 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -956,9 +956,8 @@ int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mo int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac); void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac); -int mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac); -int mlx4_get_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn); -void mlx4_put_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int qpn); +int mlx4_get_base_qpn(struct mlx4_dev *dev, u8 port); +int __mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac); void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap); int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu, u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx); -- cgit v0.10.2 From 0eb74fdda4ff72535849f9d99a8eabe69dceaddf Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:23 +0000 Subject: net/mlx4_en: Re-arrange ndo_set_rx_mode related code Currently, mlx4_en_do_set_multicast serves as the ndo_set_rx_mode entry for mlx4_en, doing all related work. Split it to few calls, one per required functionality (e.g multicast, promiscuous, etc) and rename some structures and calls to use rx_mode notation instead of multicast. Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 63a1ef3..80067d5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -747,165 +747,142 @@ static void update_mclist_flags(struct mlx4_en_priv *priv, } } -static void mlx4_en_set_multicast(struct net_device *dev) +static void mlx4_en_set_rx_mode(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); if (!priv->port_up) return; - queue_work(priv->mdev->workqueue, &priv->mcast_task); + queue_work(priv->mdev->workqueue, &priv->rx_mode_task); } -static void mlx4_en_do_set_multicast(struct work_struct *work) +static void mlx4_en_set_promisc_mode(struct mlx4_en_priv *priv, + struct mlx4_en_dev *mdev) { - struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, - mcast_task); - struct mlx4_en_dev *mdev = priv->mdev; - struct net_device *dev = priv->dev; - struct mlx4_en_mc_list *mclist, *tmp; - u64 mcast_addr = 0; - u8 mc_list[16] = {0}; int err = 0; - mutex_lock(&mdev->state_lock); - if (!mdev->device_up) { - en_dbg(HW, priv, "Card is not up, ignoring multicast change.\n"); - goto out; - } - if (!priv->port_up) { - en_dbg(HW, priv, "Port is down, ignoring multicast change.\n"); - goto out; - } - - if (!netif_carrier_ok(dev)) { - if (!mlx4_en_QUERY_PORT(mdev, priv->port)) { - if (priv->port_state.link_state) { - priv->last_link_state = MLX4_DEV_EVENT_PORT_UP; - netif_carrier_on(dev); - en_dbg(LINK, priv, "Link Up\n"); - } - } - } - - /* - * Promsicuous mode: disable all filters - */ - - if (dev->flags & IFF_PROMISC) { - if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) { - if (netif_msg_rx_status(priv)) - en_warn(priv, "Entering promiscuous mode\n"); - priv->flags |= MLX4_EN_FLAG_PROMISC; - - /* Enable promiscouos mode */ - switch (mdev->dev->caps.steering_mode) { - case MLX4_STEERING_MODE_DEVICE_MANAGED: - err = mlx4_flow_steer_promisc_add(mdev->dev, - priv->port, - priv->base_qpn, - MLX4_FS_PROMISC_UPLINK); - if (err) - en_err(priv, "Failed enabling promiscuous mode\n"); - priv->flags |= MLX4_EN_FLAG_MC_PROMISC; - break; - - case MLX4_STEERING_MODE_B0: - err = mlx4_unicast_promisc_add(mdev->dev, - priv->base_qpn, - priv->port); - if (err) - en_err(priv, "Failed enabling unicast promiscuous mode\n"); - - /* Add the default qp number as multicast - * promisc - */ - if (!(priv->flags & MLX4_EN_FLAG_MC_PROMISC)) { - err = mlx4_multicast_promisc_add(mdev->dev, - priv->base_qpn, - priv->port); - if (err) - en_err(priv, "Failed enabling multicast promiscuous mode\n"); - priv->flags |= MLX4_EN_FLAG_MC_PROMISC; - } - break; - - case MLX4_STEERING_MODE_A0: - err = mlx4_SET_PORT_qpn_calc(mdev->dev, - priv->port, - priv->base_qpn, - 1); - if (err) - en_err(priv, "Failed enabling promiscuous mode\n"); - break; - } - - /* Disable port multicast filter (unconditionally) */ - err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, - 0, MLX4_MCAST_DISABLE); - if (err) - en_err(priv, "Failed disabling multicast filter\n"); - - /* Disable port VLAN filter */ - err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); - if (err) - en_err(priv, "Failed disabling VLAN filter\n"); - } - goto out; - } - - /* - * Not in promiscuous mode - */ - - if (priv->flags & MLX4_EN_FLAG_PROMISC) { + if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) { if (netif_msg_rx_status(priv)) - en_warn(priv, "Leaving promiscuous mode\n"); - priv->flags &= ~MLX4_EN_FLAG_PROMISC; + en_warn(priv, "Entering promiscuous mode\n"); + priv->flags |= MLX4_EN_FLAG_PROMISC; - /* Disable promiscouos mode */ + /* Enable promiscouos mode */ switch (mdev->dev->caps.steering_mode) { case MLX4_STEERING_MODE_DEVICE_MANAGED: - err = mlx4_flow_steer_promisc_remove(mdev->dev, - priv->port, - MLX4_FS_PROMISC_UPLINK); + err = mlx4_flow_steer_promisc_add(mdev->dev, + priv->port, + priv->base_qpn, + MLX4_FS_PROMISC_UPLINK); if (err) - en_err(priv, "Failed disabling promiscuous mode\n"); - priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; + en_err(priv, "Failed enabling promiscuous mode\n"); + priv->flags |= MLX4_EN_FLAG_MC_PROMISC; break; case MLX4_STEERING_MODE_B0: - err = mlx4_unicast_promisc_remove(mdev->dev, - priv->base_qpn, - priv->port); + err = mlx4_unicast_promisc_add(mdev->dev, + priv->base_qpn, + priv->port); if (err) - en_err(priv, "Failed disabling unicast promiscuous mode\n"); - /* Disable Multicast promisc */ - if (priv->flags & MLX4_EN_FLAG_MC_PROMISC) { - err = mlx4_multicast_promisc_remove(mdev->dev, - priv->base_qpn, - priv->port); + en_err(priv, "Failed enabling unicast promiscuous mode\n"); + + /* Add the default qp number as multicast + * promisc + */ + if (!(priv->flags & MLX4_EN_FLAG_MC_PROMISC)) { + err = mlx4_multicast_promisc_add(mdev->dev, + priv->base_qpn, + priv->port); if (err) - en_err(priv, "Failed disabling multicast promiscuous mode\n"); - priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; + en_err(priv, "Failed enabling multicast promiscuous mode\n"); + priv->flags |= MLX4_EN_FLAG_MC_PROMISC; } break; case MLX4_STEERING_MODE_A0: err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, - priv->base_qpn, 0); + priv->base_qpn, + 1); if (err) - en_err(priv, "Failed disabling promiscuous mode\n"); + en_err(priv, "Failed enabling promiscuous mode\n"); break; } - /* Enable port VLAN filter */ + /* Disable port multicast filter (unconditionally) */ + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + en_err(priv, "Failed disabling multicast filter\n"); + + /* Disable port VLAN filter */ err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); if (err) - en_err(priv, "Failed enabling VLAN filter\n"); + en_err(priv, "Failed disabling VLAN filter\n"); + } +} + +static void mlx4_en_clear_promisc_mode(struct mlx4_en_priv *priv, + struct mlx4_en_dev *mdev) +{ + int err = 0; + + if (netif_msg_rx_status(priv)) + en_warn(priv, "Leaving promiscuous mode\n"); + priv->flags &= ~MLX4_EN_FLAG_PROMISC; + + /* Disable promiscouos mode */ + switch (mdev->dev->caps.steering_mode) { + case MLX4_STEERING_MODE_DEVICE_MANAGED: + err = mlx4_flow_steer_promisc_remove(mdev->dev, + priv->port, + MLX4_FS_PROMISC_UPLINK); + if (err) + en_err(priv, "Failed disabling promiscuous mode\n"); + priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; + break; + + case MLX4_STEERING_MODE_B0: + err = mlx4_unicast_promisc_remove(mdev->dev, + priv->base_qpn, + priv->port); + if (err) + en_err(priv, "Failed disabling unicast promiscuous mode\n"); + /* Disable Multicast promisc */ + if (priv->flags & MLX4_EN_FLAG_MC_PROMISC) { + err = mlx4_multicast_promisc_remove(mdev->dev, + priv->base_qpn, + priv->port); + if (err) + en_err(priv, "Failed disabling multicast promiscuous mode\n"); + priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC; + } + break; + + case MLX4_STEERING_MODE_A0: + err = mlx4_SET_PORT_qpn_calc(mdev->dev, + priv->port, + priv->base_qpn, 0); + if (err) + en_err(priv, "Failed disabling promiscuous mode\n"); + break; } + /* Enable port VLAN filter */ + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); + if (err) + en_err(priv, "Failed enabling VLAN filter\n"); +} + +static void mlx4_en_do_multicast(struct mlx4_en_priv *priv, + struct net_device *dev, + struct mlx4_en_dev *mdev) +{ + struct mlx4_en_mc_list *mclist, *tmp; + u64 mcast_addr = 0; + u8 mc_list[16] = {0}; + int err = 0; + /* Enable/disable the multicast filter according to IFF_ALLMULTI */ if (dev->flags & IFF_ALLMULTI) { err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, @@ -1018,6 +995,46 @@ static void mlx4_en_do_set_multicast(struct work_struct *work) } } } +} + +static void mlx4_en_do_set_rx_mode(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + rx_mode_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + + mutex_lock(&mdev->state_lock); + if (!mdev->device_up) { + en_dbg(HW, priv, "Card is not up, ignoring rx mode change.\n"); + goto out; + } + if (!priv->port_up) { + en_dbg(HW, priv, "Port is down, ignoring rx mode change.\n"); + goto out; + } + + if (!netif_carrier_ok(dev)) { + if (!mlx4_en_QUERY_PORT(mdev, priv->port)) { + if (priv->port_state.link_state) { + priv->last_link_state = MLX4_DEV_EVENT_PORT_UP; + netif_carrier_on(dev); + en_dbg(LINK, priv, "Link Up\n"); + } + } + } + + /* Promsicuous mode: disable all filters */ + if (dev->flags & IFF_PROMISC) { + mlx4_en_set_promisc_mode(priv, mdev); + goto out; + } + + /* Not in promiscuous mode */ + if (priv->flags & MLX4_EN_FLAG_PROMISC) + mlx4_en_clear_promisc_mode(priv, mdev); + + mlx4_en_do_multicast(priv, dev, mdev); out: mutex_unlock(&mdev->state_lock); } @@ -1374,7 +1391,7 @@ int mlx4_en_start_port(struct net_device *dev) priv->flags &= ~(MLX4_EN_FLAG_PROMISC | MLX4_EN_FLAG_MC_PROMISC); /* Schedule multicast task to populate multicast list */ - queue_work(mdev->workqueue, &priv->mcast_task); + queue_work(mdev->workqueue, &priv->rx_mode_task); mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap); @@ -1777,7 +1794,7 @@ static const struct net_device_ops mlx4_netdev_ops = { .ndo_start_xmit = mlx4_en_xmit, .ndo_select_queue = mlx4_en_select_queue, .ndo_get_stats = mlx4_en_get_stats, - .ndo_set_rx_mode = mlx4_en_set_multicast, + .ndo_set_rx_mode = mlx4_en_set_rx_mode, .ndo_set_mac_address = mlx4_en_set_mac, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = mlx4_en_change_mtu, @@ -1847,7 +1864,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, priv->mac_index = -1; priv->msg_enable = MLX4_EN_MSG_LEVEL; spin_lock_init(&priv->stats_lock); - INIT_WORK(&priv->mcast_task, mlx4_en_do_set_multicast); + INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode); INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac); INIT_WORK(&priv->watchdog_task, mlx4_en_restart); INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 84ed3285..47c9876 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -504,7 +504,7 @@ struct mlx4_en_priv { struct mlx4_en_cq *tx_cq; struct mlx4_en_cq rx_cq[MAX_RX_RINGS]; struct mlx4_qp drop_qp; - struct work_struct mcast_task; + struct work_struct rx_mode_task; struct work_struct mac_task; struct work_struct watchdog_task; struct work_struct linkstate_task; -- cgit v0.10.2 From 90bbb74af68b3255bc298731f8b60d5668877306 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:24 +0000 Subject: net/mlx4_en: Save previous MAC address of the port so we can replace it later In preparation to having more than one unicast MAC per port, we need to keep track of the previous MAC address in the flow of ndo_set_mac_address, so that mlx4_en_replace_mac will know what to replace. Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 80067d5..72a3fe5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -591,7 +591,7 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv) } static int mlx4_en_replace_mac(struct mlx4_en_priv *priv, int qpn, - unsigned char *new_mac) + unsigned char *new_mac, unsigned char *prev_mac) { struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_dev *dev = mdev->dev; @@ -657,7 +657,7 @@ static void mlx4_en_do_set_mac(struct work_struct *work) if (priv->port_up) { /* Remove old MAC and insert the new one */ err = mlx4_en_replace_mac(priv, priv->base_qpn, - priv->dev->dev_addr); + priv->dev->dev_addr, priv->prev_mac); if (err) en_err(priv, "Failed changing HW MAC address\n"); memcpy(priv->prev_mac, priv->dev->dev_addr, -- cgit v0.10.2 From c07cb4b0ab78f279ea94c3b4661cad86eb02a5d9 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:25 +0000 Subject: net/mlx4_en: Manage hash of MAC addresses per port As a preparation step for supporting multiple unicast addresses, store MAC addresses in hash table. Remove the radix tree for MAC addresses per QP, as it's not in use. Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 72a3fe5..8eb24ee 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -545,13 +545,10 @@ static int mlx4_en_get_qp(struct mlx4_en_priv *priv) memcpy(entry->mac, priv->dev->dev_addr, sizeof(entry->mac)); entry->reg_id = reg_id; - err = radix_tree_insert(&priv->mac_tree, *qpn, entry); - if (err) - goto insert_err; - return 0; + hlist_add_head_rcu(&entry->hlist, + &priv->mac_hash[entry->mac[MLX4_EN_MAC_HASH_IDX]]); -insert_err: - kfree(entry); + return 0; alloc_err: mlx4_en_uc_steer_release(priv, priv->dev->dev_addr, *qpn, reg_id); @@ -568,7 +565,6 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv) { struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_dev *dev = mdev->dev; - struct mlx4_mac_entry *entry; int qpn = priv->base_qpn; u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); @@ -577,15 +573,26 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv) mlx4_unregister_mac(dev, priv->port, mac); if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { - entry = radix_tree_lookup(&priv->mac_tree, qpn); - if (entry) { - en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n", - priv->port, entry->mac, qpn); - mlx4_en_uc_steer_release(priv, entry->mac, - qpn, entry->reg_id); - mlx4_qp_release_range(dev, qpn, 1); - radix_tree_delete(&priv->mac_tree, qpn); - kfree(entry); + struct mlx4_mac_entry *entry; + struct hlist_node *n, *tmp; + struct hlist_head *bucket; + unsigned int mac_hash; + + mac_hash = priv->dev->dev_addr[MLX4_EN_MAC_HASH_IDX]; + bucket = &priv->mac_hash[mac_hash]; + hlist_for_each_entry_safe(entry, n, tmp, bucket, hlist) { + if (ether_addr_equal_64bits(entry->mac, + priv->dev->dev_addr)) { + en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n", + priv->port, priv->dev->dev_addr, qpn); + mlx4_en_uc_steer_release(priv, entry->mac, + qpn, entry->reg_id); + mlx4_qp_release_range(dev, qpn, 1); + + hlist_del_rcu(&entry->hlist); + kfree_rcu(entry, rcu); + break; + } } } } @@ -595,26 +602,38 @@ static int mlx4_en_replace_mac(struct mlx4_en_priv *priv, int qpn, { struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_dev *dev = mdev->dev; - struct mlx4_mac_entry *entry; int err = 0; u64 new_mac_u64 = mlx4_en_mac_to_u64(new_mac); if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { - u64 prev_mac_u64; - - entry = radix_tree_lookup(&priv->mac_tree, qpn); - if (!entry) - return -EINVAL; - prev_mac_u64 = mlx4_en_mac_to_u64(entry->mac); - mlx4_en_uc_steer_release(priv, entry->mac, - qpn, entry->reg_id); - mlx4_unregister_mac(dev, priv->port, prev_mac_u64); - memcpy(entry->mac, new_mac, ETH_ALEN); - entry->reg_id = 0; - mlx4_register_mac(dev, priv->port, new_mac_u64); - err = mlx4_en_uc_steer_add(priv, new_mac, - &qpn, &entry->reg_id); - return err; + struct hlist_head *bucket; + unsigned int mac_hash; + struct mlx4_mac_entry *entry; + struct hlist_node *n, *tmp; + u64 prev_mac_u64 = mlx4_en_mac_to_u64(prev_mac); + + bucket = &priv->mac_hash[prev_mac[MLX4_EN_MAC_HASH_IDX]]; + hlist_for_each_entry_safe(entry, n, tmp, bucket, hlist) { + if (ether_addr_equal_64bits(entry->mac, prev_mac)) { + mlx4_en_uc_steer_release(priv, entry->mac, + qpn, entry->reg_id); + mlx4_unregister_mac(dev, priv->port, + prev_mac_u64); + hlist_del_rcu(&entry->hlist); + synchronize_rcu(); + memcpy(entry->mac, new_mac, ETH_ALEN); + entry->reg_id = 0; + mac_hash = new_mac[MLX4_EN_MAC_HASH_IDX]; + hlist_add_head_rcu(&entry->hlist, + &priv->mac_hash[mac_hash]); + mlx4_register_mac(dev, priv->port, new_mac_u64); + err = mlx4_en_uc_steer_add(priv, new_mac, + &qpn, + &entry->reg_id); + return err; + } + } + return -EINVAL; } return __mlx4_replace_mac(dev, priv->port, qpn, new_mac_u64); @@ -1816,6 +1835,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, { struct net_device *dev; struct mlx4_en_priv *priv; + int i; int err; dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), @@ -1874,7 +1894,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->dcbnl_ops = &mlx4_en_dcbnl_ops; #endif - INIT_RADIX_TREE(&priv->mac_tree, GFP_KERNEL); + for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) + INIT_HLIST_HEAD(&priv->mac_hash[i]); /* Query for default mac and max mtu */ priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port]; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 2e7f5bb..91bb8e1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -615,10 +615,25 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud ethh = (struct ethhdr *)(page_address(frags[0].page) + frags[0].offset); - /* Drop the packet, since HW loopback-ed it */ - if (ether_addr_equal_64bits(dev->dev_addr, - ethh->h_source)) - goto next; + if (is_multicast_ether_addr(ethh->h_dest)) { + struct mlx4_mac_entry *entry; + struct hlist_node *n; + struct hlist_head *bucket; + unsigned int mac_hash; + + /* Drop the packet, since HW loopback-ed it */ + mac_hash = ethh->h_source[MLX4_EN_MAC_HASH_IDX]; + bucket = &priv->mac_hash[mac_hash]; + rcu_read_lock(); + hlist_for_each_entry_rcu(entry, n, bucket, hlist) { + if (ether_addr_equal_64bits(entry->mac, + ethh->h_source)) { + rcu_read_unlock(); + goto next; + } + } + rcu_read_unlock(); + } } /* diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 47c9876..0ff99e0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -442,6 +442,9 @@ enum { MLX4_EN_FLAG_RX_FILTER_NEEDED = (1 << 3) }; +#define MLX4_EN_MAC_HASH_SIZE (1 << BITS_PER_BYTE) +#define MLX4_EN_MAC_HASH_IDX 5 + struct mlx4_en_priv { struct mlx4_en_dev *mdev; struct mlx4_en_port_profile *prof; @@ -521,7 +524,7 @@ struct mlx4_en_priv { bool wol; struct device *ddev; int base_tx_qpn; - struct radix_tree_root mac_tree; + struct hlist_head mac_hash[MLX4_EN_MAC_HASH_SIZE]; #ifdef CONFIG_MLX4_EN_DCB struct ieee_ets ets; @@ -542,8 +545,10 @@ enum mlx4_en_wol { }; struct mlx4_mac_entry { + struct hlist_node hlist; unsigned char mac[ETH_ALEN + 2]; u64 reg_id; + struct rcu_head rcu; }; #define MLX4_EN_WOL_DO_MODIFY (1ULL << 63) -- cgit v0.10.2 From cc5387f7346a9f35aaf7f35133666fa8acbcbde3 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:26 +0000 Subject: net/mlx4_en: Add unicast MAC filtering Implement and advertise unicast MAC filtering, such that setting macvlan instance over mlx4_en interfaces will not require the networking core to put mlx4_en devices in promiscuous mode. If for some reason adding a unicast address filter fails e.g as of missing space in the HW mac table, the device forces itself into promiscuous mode (and out of this forced state when enough space is available). Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 8eb24ee..2c19dab 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1016,6 +1016,126 @@ static void mlx4_en_do_multicast(struct mlx4_en_priv *priv, } } +static void mlx4_en_do_uc_filter(struct mlx4_en_priv *priv, + struct net_device *dev, + struct mlx4_en_dev *mdev) +{ + struct netdev_hw_addr *ha; + struct mlx4_mac_entry *entry; + struct hlist_node *n, *tmp; + bool found; + u64 mac; + int err = 0; + struct hlist_head *bucket; + unsigned int i; + int removed = 0; + u32 prev_flags; + + /* Note that we do not need to protect our mac_hash traversal with rcu, + * since all modification code is protected by mdev->state_lock + */ + + /* find what to remove */ + for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) { + bucket = &priv->mac_hash[i]; + hlist_for_each_entry_safe(entry, n, tmp, bucket, hlist) { + found = false; + netdev_for_each_uc_addr(ha, dev) { + if (ether_addr_equal_64bits(entry->mac, + ha->addr)) { + found = true; + break; + } + } + + /* MAC address of the port is not in uc list */ + if (ether_addr_equal_64bits(entry->mac, dev->dev_addr)) + found = true; + + if (!found) { + mac = mlx4_en_mac_to_u64(entry->mac); + mlx4_en_uc_steer_release(priv, entry->mac, + priv->base_qpn, + entry->reg_id); + mlx4_unregister_mac(mdev->dev, priv->port, mac); + + hlist_del_rcu(&entry->hlist); + kfree_rcu(entry, rcu); + en_dbg(DRV, priv, "Removed MAC %pM on port:%d\n", + entry->mac, priv->port); + ++removed; + } + } + } + + /* if we didn't remove anything, there is no use in trying to add + * again once we are in a forced promisc mode state + */ + if ((priv->flags & MLX4_EN_FLAG_FORCE_PROMISC) && 0 == removed) + return; + + prev_flags = priv->flags; + priv->flags &= ~MLX4_EN_FLAG_FORCE_PROMISC; + + /* find what to add */ + netdev_for_each_uc_addr(ha, dev) { + found = false; + bucket = &priv->mac_hash[ha->addr[MLX4_EN_MAC_HASH_IDX]]; + hlist_for_each_entry(entry, n, bucket, hlist) { + if (ether_addr_equal_64bits(entry->mac, ha->addr)) { + found = true; + break; + } + } + + if (!found) { + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + en_err(priv, "Failed adding MAC %pM on port:%d (out of memory)\n", + ha->addr, priv->port); + priv->flags |= MLX4_EN_FLAG_FORCE_PROMISC; + break; + } + mac = mlx4_en_mac_to_u64(ha->addr); + memcpy(entry->mac, ha->addr, ETH_ALEN); + err = mlx4_register_mac(mdev->dev, priv->port, mac); + if (err < 0) { + en_err(priv, "Failed registering MAC %pM on port %d: %d\n", + ha->addr, priv->port, err); + kfree(entry); + priv->flags |= MLX4_EN_FLAG_FORCE_PROMISC; + break; + } + err = mlx4_en_uc_steer_add(priv, ha->addr, + &priv->base_qpn, + &entry->reg_id); + if (err) { + en_err(priv, "Failed adding MAC %pM on port %d: %d\n", + ha->addr, priv->port, err); + mlx4_unregister_mac(mdev->dev, priv->port, mac); + kfree(entry); + priv->flags |= MLX4_EN_FLAG_FORCE_PROMISC; + break; + } else { + unsigned int mac_hash; + en_dbg(DRV, priv, "Added MAC %pM on port:%d\n", + ha->addr, priv->port); + mac_hash = ha->addr[MLX4_EN_MAC_HASH_IDX]; + bucket = &priv->mac_hash[mac_hash]; + hlist_add_head_rcu(&entry->hlist, bucket); + } + } + } + + if (priv->flags & MLX4_EN_FLAG_FORCE_PROMISC) { + en_warn(priv, "Forcing promiscuous mode on port:%d\n", + priv->port); + } else if (prev_flags & MLX4_EN_FLAG_FORCE_PROMISC) { + en_warn(priv, "Stop forcing promiscuous mode on port:%d\n", + priv->port); + } +} + static void mlx4_en_do_set_rx_mode(struct work_struct *work) { struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, @@ -1043,8 +1163,12 @@ static void mlx4_en_do_set_rx_mode(struct work_struct *work) } } + if (dev->priv_flags & IFF_UNICAST_FLT) + mlx4_en_do_uc_filter(priv, dev, mdev); + /* Promsicuous mode: disable all filters */ - if (dev->flags & IFF_PROMISC) { + if ((dev->flags & IFF_PROMISC) || + (priv->flags & MLX4_EN_FLAG_FORCE_PROMISC)) { mlx4_en_set_promisc_mode(priv, mdev); goto out; } @@ -1961,6 +2085,9 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, MLX4_STEERING_MODE_DEVICE_MANAGED) dev->hw_features |= NETIF_F_NTUPLE; + if (mdev->dev->caps.steering_mode != MLX4_STEERING_MODE_A0) + dev->priv_flags |= IFF_UNICAST_FLT; + mdev->pndev[port] = dev; netif_carrier_off(dev); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 0ff99e0..c313d7e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -439,7 +439,8 @@ enum { */ MLX4_EN_FLAG_ENABLE_HW_LOOPBACK = (1 << 2), /* whether we need to drop packets that hardware loopback-ed */ - MLX4_EN_FLAG_RX_FILTER_NEEDED = (1 << 3) + MLX4_EN_FLAG_RX_FILTER_NEEDED = (1 << 3), + MLX4_EN_FLAG_FORCE_PROMISC = (1 << 4) }; #define MLX4_EN_MAC_HASH_SIZE (1 << BITS_PER_BYTE) -- cgit v0.10.2 From 0ccddcd1c2d93ff58b42115f19a0976394208d06 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Feb 2013 02:25:27 +0000 Subject: net/mlx4_en: Implement ndo fdb functionality Add support for setting embedded switch fdb in case of SRIOV, by implementing ndo_fdb_{add, del, dump}. This will allow to use bridged configuration with multi-function. In order to add VM MAC to the eSwitch fdb, the following command may be used over the relevant function interface: bridge fdb add permanent self dev Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 2c19dab..4671fa5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1931,6 +1931,78 @@ static int mlx4_en_set_features(struct net_device *netdev, } +static int mlx4_en_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *dev, + const unsigned char *addr, u16 flags) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_dev *mdev = priv->mdev->dev; + int err; + + if (!mlx4_is_mfunc(mdev)) + return -EOPNOTSUPP; + + /* Hardware does not support aging addresses, allow only + * permanent addresses if ndm_state is given + */ + if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { + en_info(priv, "Add FDB only supports static addresses\n"); + return -EINVAL; + } + + if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) + err = dev_uc_add_excl(dev, addr); + else if (is_multicast_ether_addr(addr)) + err = dev_mc_add_excl(dev, addr); + else + err = -EINVAL; + + /* Only return duplicate errors if NLM_F_EXCL is set */ + if (err == -EEXIST && !(flags & NLM_F_EXCL)) + err = 0; + + return err; +} + +static int mlx4_en_fdb_del(struct ndmsg *ndm, + struct net_device *dev, + const unsigned char *addr) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_dev *mdev = priv->mdev->dev; + int err; + + if (!mlx4_is_mfunc(mdev)) + return -EOPNOTSUPP; + + if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { + en_info(priv, "Del FDB only supports static addresses\n"); + return -EINVAL; + } + + if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) + err = dev_uc_del(dev, addr); + else if (is_multicast_ether_addr(addr)) + err = dev_mc_del(dev, addr); + else + err = -EINVAL; + + return err; +} + +static int mlx4_en_fdb_dump(struct sk_buff *skb, + struct netlink_callback *cb, + struct net_device *dev, int idx) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_dev *mdev = priv->mdev->dev; + + if (mlx4_is_mfunc(mdev)) + idx = ndo_dflt_fdb_dump(skb, cb, dev, idx); + + return idx; +} + static const struct net_device_ops mlx4_netdev_ops = { .ndo_open = mlx4_en_open, .ndo_stop = mlx4_en_close, @@ -1952,6 +2024,9 @@ static const struct net_device_ops mlx4_netdev_ops = { #ifdef CONFIG_RFS_ACCEL .ndo_rx_flow_steer = mlx4_en_filter_rfs, #endif + .ndo_fdb_add = mlx4_en_fdb_add, + .ndo_fdb_del = mlx4_en_fdb_del, + .ndo_fdb_dump = mlx4_en_fdb_dump, }; int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, -- cgit v0.10.2 From 41b749201bbe54ce807c4287b4942e85cb0ca466 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 6 Feb 2013 07:58:41 +0000 Subject: mlx4_en: Fix BQL reset TX queue call point Fix issue in Mellanox driver related to BQL. netdev_tx_reset_queue was not being called in certain situations where the device was being start and stopped. Moved netdev_tx_reset_queue from the reset device path to mlx4_en_free_tx_buf which is where the rings are cleaned in a reset (specifically from device being stopped). Signed-off-by: Tom Herbert Acked-By: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 4671fa5..c9a191b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1685,15 +1685,12 @@ static void mlx4_en_restart(struct work_struct *work) watchdog_task); struct mlx4_en_dev *mdev = priv->mdev; struct net_device *dev = priv->dev; - int i; en_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port); mutex_lock(&mdev->state_lock); if (priv->port_up) { mlx4_en_stop_port(dev, 1); - for (i = 0; i < priv->tx_ring_num; i++) - netdev_tx_reset_queue(priv->tx_ring[i].tx_queue); if (mlx4_en_start_port(dev)) en_err(priv, "Failed restarting port %d\n", priv->port); } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 3b28e16..49308cc 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -294,6 +294,8 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring) cnt++; } + netdev_tx_reset_queue(ring->tx_queue); + if (cnt) en_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt); -- cgit v0.10.2 From 365cc174648cd7e9b11e522c3d5b07ccf3c60d99 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Wed, 6 Feb 2013 14:59:58 +0000 Subject: net: fec: correct fix method about miss init spinlock Old method will cause init spinlock twice. New method will avoid init spinlock twice and fix miss init spinlock at fec_restart. BUG: spinlock bad magic on CPU#1, swapper/0/1 lock: 0xbfae0f8c, .magic: 00000000, .owner: /-1, .owner_cpu: 0 Backtrace: [<80011d54>] (dump_backtrace+0x0/0x10c) from [<804e7800>] (dump_stack+0x18/0x1c) r6:bfae0000 r5:bfae0f8c r4:00000000 r3:806c1310 [<804e77e8>] (dump_stack+0x0/0x1c) from [<804e9f20>] (spin_dump+0x80/0x94) [<804e9ea0>] (spin_dump+0x0/0x94) from [<804e9f60>] (spin_bug+0x2c/0x30) r5:805f6f8c r4:bfae0f8c [<804e9f34>] (spin_bug+0x0/0x30) from [<80257984>] (do_raw_spin_lock+0x170/0x1b0 ) r5:806b4950 r4:bfae0f8c [<80257814>] (do_raw_spin_lock+0x0/0x1b0) from [<804ed15c>] (_raw_spin_lock_irqs ave+0x18/0x20) [<804ed144>] (_raw_spin_lock_irqsave+0x0/0x20) from [<8033c694>] (fec_ptp_start_ cyclecounter+0x3c/0x120) r4:bfae0f8c r3:00000002 [<8033c658>] (fec_ptp_start_cyclecounter+0x0/0x120) from [<80339e08>] (fec_resta rt+0x56c/0x5f8) r8:00000000 r7:806e6f48 r6:00000112 r5:806b4950 r4:bfae0000 [<8033989c>] (fec_restart+0x0/0x5f8) from [<8033b9e4>] (fec_probe+0x508/0xa48) Signed-off-by: Frank Li Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 51215e1..0fe68c4 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1609,7 +1609,6 @@ static int fec_enet_init(struct net_device *ndev) } spin_lock_init(&fep->hw_lock); - spin_lock_init(&fep->tmreg_lock); fep->netdev = ndev; @@ -1841,6 +1840,9 @@ fec_probe(struct platform_device *pdev) fec_reset_phy(pdev); + if (fep->bufdesc_ex) + fec_ptp_init(ndev, pdev); + ret = fec_enet_init(ndev); if (ret) goto failed_init; @@ -1856,9 +1858,6 @@ fec_probe(struct platform_device *pdev) if (ret) goto failed_register; - if (fep->bufdesc_ex) - fec_ptp_init(ndev, pdev); - return 0; failed_register: -- cgit v0.10.2 From 85bd1798b24a13462d7b064961e7a9da3bb12db1 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Wed, 6 Feb 2013 14:59:59 +0000 Subject: net: fec: fix spin_lock dead lock ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.8.0-rc5+ #82 Not tainted --------------------------------------------------------- swapper/0/0 just changed the state of lock: (&(&fep->hw_lock)->rlock){..-...}, at: [<8034e2f8>] fec_enet_start_xmit+0x48/0x 2cc but this lock took another, SOFTIRQ-unsafe lock in the past: (prepare_lock){+.+.+.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(prepare_lock); local_irq_disable() lock(&(&fep->hw_lock)->rlock); lock(prepare_lock); lock(&(&fep->hw_lock)->rlock); *** DEADLOCK *** Signed-off-by: Frank Li Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index c40526c..1f17ca0 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -104,7 +104,7 @@ void fec_ptp_start_cyclecounter(struct net_device *ndev) unsigned long flags; int inc; - inc = 1000000000 / clk_get_rate(fep->clk_ptp); + inc = 1000000000 / fep->cycle_speed; /* grab the ptp lock */ spin_lock_irqsave(&fep->tmreg_lock, flags); @@ -363,6 +363,8 @@ void fec_ptp_init(struct net_device *ndev, struct platform_device *pdev) fep->ptp_caps.settime = fec_ptp_settime; fep->ptp_caps.enable = fec_ptp_enable; + fep->cycle_speed = clk_get_rate(fep->clk_ptp); + spin_lock_init(&fep->tmreg_lock); fec_ptp_start_cyclecounter(ndev); -- cgit v0.10.2 From 241448c2b84ff02a46ce88199e05fdeb55bad449 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 7 Feb 2013 01:41:39 +0000 Subject: net: sctp: sctp_auth_make_key_vector: remove duplicate ntohs calls Instead of calling 3 times ntohs(random->param_hdr.length), 2 times ntohs(hmacs->param_hdr.length), and 3 times ntohs(chunks->param_hdr.length) within the same function, we only call each once and store it in a variable. Signed-off-by: Daniel Borkmann Acked-by: Neil Horman Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 159b9bc..94a12de 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -200,10 +200,14 @@ static struct sctp_auth_bytes *sctp_auth_make_key_vector( struct sctp_auth_bytes *new; __u32 len; __u32 offset = 0; + __u16 random_len, hmacs_len, chunks_len = 0; - len = ntohs(random->param_hdr.length) + ntohs(hmacs->param_hdr.length); - if (chunks) - len += ntohs(chunks->param_hdr.length); + random_len = ntohs(random->param_hdr.length); + hmacs_len = ntohs(hmacs->param_hdr.length); + if (chunks) + chunks_len = ntohs(chunks->param_hdr.length); + + len = random_len + hmacs_len + chunks_len; new = kmalloc(sizeof(struct sctp_auth_bytes) + len, gfp); if (!new) @@ -211,16 +215,15 @@ static struct sctp_auth_bytes *sctp_auth_make_key_vector( new->len = len; - memcpy(new->data, random, ntohs(random->param_hdr.length)); - offset += ntohs(random->param_hdr.length); + memcpy(new->data, random, random_len); + offset += random_len; if (chunks) { - memcpy(new->data + offset, chunks, - ntohs(chunks->param_hdr.length)); - offset += ntohs(chunks->param_hdr.length); + memcpy(new->data + offset, chunks, chunks_len); + offset += chunks_len; } - memcpy(new->data + offset, hmacs, ntohs(hmacs->param_hdr.length)); + memcpy(new->data + offset, hmacs, hmacs_len); return new; } -- cgit v0.10.2 From 180996c30517b5374f63df3c9765716c5b477155 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 7 Feb 2013 05:37:37 +0000 Subject: ssb: get mac address from sprom struct for gige driver The mac address is already stored in the sprom structure by the platform code of the SoC this Ethernet core is found on, it just has to be fetched from this structure instead of accessing the nvram here. This patch also adds a return value to indicate if a mac address could be fetched from the sprom structure. When CONFIG_SSB_DRIVER_GIGE is not set the header file now also declares ssb_gige_get_macaddr(). Signed-off-by: Hauke Mehrtens Acked-by: Michael Buesch Signed-off-by: David S. Miller diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h index 6b05dcd..86a12b0 100644 --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) return 0; } -#ifdef CONFIG_BCM47XX -#include /* Get the device MAC address */ -static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) -{ - char buf[20]; - if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) - return; - nvram_parse_macaddr(buf, macaddr); -} -#else -static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) { + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (!dev) + return -ENODEV; + + memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6); + return 0; } -#endif extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, struct pci_dev *pdev); @@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) { return 0; } +static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +{ + return -ENODEV; +} #endif /* CONFIG_SSB_DRIVER_GIGE */ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */ -- cgit v0.10.2 From 5c358045ae6b4e9ec7edcd70e6486123ca2c9c72 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 7 Feb 2013 05:37:38 +0000 Subject: tg3: make it possible to provide phy_id in ioctl In OpenWrt we currently use a switch driver which uses the ioctls to configure the switch in the phy. We have to provide the phy_id to do so, but without this patch this is not possible. Signed-off-by: Hauke Mehrtens Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 90195e3..d9e81d6 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1091,7 +1091,8 @@ static void tg3_switch_clocks(struct tg3 *tp) #define PHY_BUSY_LOOPS 5000 -static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) +static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, + u32 *val) { u32 frame_val; unsigned int loops; @@ -1107,7 +1108,7 @@ static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) *val = 0x0; - frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) & + frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & MI_COM_PHY_ADDR_MASK); frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & MI_COM_REG_ADDR_MASK); @@ -1144,7 +1145,13 @@ static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) return ret; } -static int tg3_writephy(struct tg3 *tp, int reg, u32 val) +static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) +{ + return __tg3_readphy(tp, tp->phy_addr, reg, val); +} + +static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, + u32 val) { u32 frame_val; unsigned int loops; @@ -1162,7 +1169,7 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val) tg3_ape_lock(tp, tp->phy_ape_lock); - frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) & + frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & MI_COM_PHY_ADDR_MASK); frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & MI_COM_REG_ADDR_MASK); @@ -1197,6 +1204,11 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val) return ret; } +static int tg3_writephy(struct tg3 *tp, int reg, u32 val) +{ + return __tg3_writephy(tp, tp->phy_addr, reg, val); +} + static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val) { int err; @@ -12969,7 +12981,8 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return -EAGAIN; spin_lock_bh(&tp->lock); - err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); + err = __tg3_readphy(tp, data->phy_id & 0x1f, + data->reg_num & 0x1f, &mii_regval); spin_unlock_bh(&tp->lock); data->val_out = mii_regval; @@ -12985,7 +12998,8 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return -EAGAIN; spin_lock_bh(&tp->lock); - err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); + err = __tg3_writephy(tp, data->phy_id & 0x1f, + data->reg_num & 0x1f, data->val_in); spin_unlock_bh(&tp->lock); return err; -- cgit v0.10.2 From 7e6c63f03d94278135753fef7ffcc5b03e34282e Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 7 Feb 2013 05:37:39 +0000 Subject: tg3: add support for Ethernet core in bcm4785 The BCM4785 or sometimes named BMC4705 is a Broadcom SoC which a Gigabit 5750 Ethernet core. The core is connected via PCI with the rest of the SoC, but it uses some extension. This core does not use a firmware or an eeprom. Some devices only have a switch which supports 100MBit/s, this currently does not work with this driver. This patch was original written by Michael Buesch and is in OpenWrt for some years now. This was tested on a Linksys WRT610N V1 and older versions of this patch were tested by other people on different devices. Signed-off-by: Hauke Mehrtens Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d9e81d6..b1b3bc0 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include @@ -263,6 +264,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = { TG3_DRV_DATA_FLAG_5705_10_100}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F), @@ -573,7 +575,9 @@ static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait) static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) { tp->write32_mbox(tp, off, val); - if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND)) + if (tg3_flag(tp, FLUSH_POSTED_WRITES) || + (!tg3_flag(tp, MBOX_WRITE_REORDER) && + !tg3_flag(tp, ICH_WORKAROUND))) tp->read32_mbox(tp, off); } @@ -583,7 +587,8 @@ static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val) writel(val, mbox); if (tg3_flag(tp, TXD_MBOX_HWBUG)) writel(val, mbox); - if (tg3_flag(tp, MBOX_WRITE_REORDER)) + if (tg3_flag(tp, MBOX_WRITE_REORDER) || + tg3_flag(tp, FLUSH_POSTED_WRITES)) readl(mbox); } @@ -1793,6 +1798,11 @@ static int tg3_poll_fw(struct tg3 *tp) int i; u32 val; + if (tg3_flag(tp, IS_SSB_CORE)) { + /* We don't use firmware. */ + return 0; + } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { /* Wait up to 20ms for init done. */ for (i = 0; i < 200; i++) { @@ -3465,6 +3475,13 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset) tw32_f(offset + CPU_MODE, CPU_MODE_HALT); udelay(10); } else { + /* + * There is only an Rx CPU for the 5750 derivative in the + * BCM4785. + */ + if (tg3_flag(tp, IS_SSB_CORE)) + return 0; + for (i = 0; i < 10000; i++) { tw32(offset + CPU_STATE, 0xffffffff); tw32(offset + CPU_MODE, CPU_MODE_HALT); @@ -3932,8 +3949,9 @@ static int tg3_power_down_prepare(struct tg3 *tp) tg3_frob_aux_power(tp, true); /* Workaround for unstable PLL clock */ - if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || - (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) { + if ((!tg3_flag(tp, IS_SSB_CORE)) && + ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || + (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) { u32 val = tr32(0x7d00); val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1); @@ -4454,6 +4472,15 @@ relink: if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) { tg3_phy_copper_begin(tp); + if (tg3_flag(tp, ROBOSWITCH)) { + current_link_up = 1; + /* FIXME: when BCM5325 switch is used use 100 MBit/s */ + current_speed = SPEED_1000; + current_duplex = DUPLEX_FULL; + tp->link_config.active_speed = current_speed; + tp->link_config.active_duplex = current_duplex; + } + tg3_readphy(tp, MII_BMSR, &bmsr); if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) || (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)) @@ -4472,6 +4499,26 @@ relink: else tp->mac_mode |= MAC_MODE_PORT_MODE_GMII; + /* In order for the 5750 core in BCM4785 chip to work properly + * in RGMII mode, the Led Control Register must be set up. + */ + if (tg3_flag(tp, RGMII_MODE)) { + u32 led_ctrl = tr32(MAC_LED_CTRL); + led_ctrl &= ~(LED_CTRL_1000MBPS_ON | LED_CTRL_100MBPS_ON); + + if (tp->link_config.active_speed == SPEED_10) + led_ctrl |= LED_CTRL_LNKLED_OVERRIDE; + else if (tp->link_config.active_speed == SPEED_100) + led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE | + LED_CTRL_100MBPS_ON); + else if (tp->link_config.active_speed == SPEED_1000) + led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE | + LED_CTRL_1000MBPS_ON); + + tw32(MAC_LED_CTRL, led_ctrl); + udelay(40); + } + tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX; if (tp->link_config.active_duplex == DUPLEX_HALF) tp->mac_mode |= MAC_MODE_HALF_DUPLEX; @@ -8449,6 +8496,16 @@ static int tg3_chip_reset(struct tg3 *tp) tw32(0x5000, 0x400); } + if (tg3_flag(tp, IS_SSB_CORE)) { + /* + * BCM4785: In order to avoid repercussions from using + * potentially defective internal ROM, stop the Rx RISC CPU, + * which is not required. + */ + tg3_stop_fw(tp); + tg3_halt_cpu(tp, RX_CPU_BASE); + } + tw32(GRC_MODE, tp->grc_mode); if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { @@ -10107,6 +10164,11 @@ static void tg3_timer(unsigned long __opaque) tg3_flag(tp, 57765_CLASS)) tg3_chk_missed_msi(tp); + if (tg3_flag(tp, FLUSH_POSTED_WRITES)) { + /* BCM4785: Flush posted writes from GbE to host memory. */ + tr32(HOSTCC_MODE); + } + if (!tg3_flag(tp, TAGGED_STATUS)) { /* All of this garbage is because when using non-tagged * IRQ status the mailbox/status_block protocol the chip @@ -13879,6 +13941,14 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) /* Chips other than 5700/5701 use the NVRAM for fetching info. */ static void tg3_nvram_init(struct tg3 *tp) { + if (tg3_flag(tp, IS_SSB_CORE)) { + /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */ + tg3_flag_clear(tp, NVRAM); + tg3_flag_clear(tp, NVRAM_BUFFERED); + tg3_flag_set(tp, NO_NVRAM); + return; + } + tw32_f(GRC_EEPROM_ADDR, (EEPROM_ADDR_FSM_RESET | (EEPROM_DEFAULT_CLOCK_PERIOD << @@ -14405,10 +14475,19 @@ static int tg3_phy_probe(struct tg3 *tp) * subsys device table. */ p = tg3_lookup_by_subsys(tp); - if (!p) + if (p) { + tp->phy_id = p->phy_id; + } else if (!tg3_flag(tp, IS_SSB_CORE)) { + /* For now we saw the IDs 0xbc050cd0, + * 0xbc050f80 and 0xbc050c30 on devices + * connected to an BCM4785 and there are + * probably more. Just assume that the phy is + * supported when it is connected to a SSB core + * for now. + */ return -ENODEV; + } - tp->phy_id = p->phy_id; if (!tp->phy_id || tp->phy_id == TG3_PHY_ID_BCM8002) tp->phy_flags |= TG3_PHYFLG_PHY_SERDES; @@ -15484,6 +15563,11 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) TG3_CPMU_STATUS_FSHFT_5719; } + if (tg3_flag(tp, FLUSH_POSTED_WRITES)) { + tp->write32_tx_mbox = tg3_write_flush_reg32; + tp->write32_rx_mbox = tg3_write_flush_reg32; + } + /* Get eeprom hw config before calling tg3_set_power_state(). * In particular, the TG3_FLAG_IS_NIC flag must be * determined before calling tg3_set_power_state() so that @@ -15820,12 +15904,19 @@ static int tg3_get_device_address(struct tg3 *tp) struct net_device *dev = tp->dev; u32 hi, lo, mac_offset; int addr_ok = 0; + int err; #ifdef CONFIG_SPARC if (!tg3_get_macaddr_sparc(tp)) return 0; #endif + if (tg3_flag(tp, IS_SSB_CORE)) { + err = ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]); + if (!err && is_valid_ether_addr(&dev->dev_addr[0])) + return 0; + } + mac_offset = 0x7c; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || tg3_flag(tp, 5780_CLASS)) { @@ -16185,6 +16276,8 @@ static int tg3_test_dma(struct tg3 *tp) tp->dma_rwctrl |= 0x001b000f; } } + if (tg3_flag(tp, ONE_DMA_AT_ONCE)) + tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) @@ -16530,6 +16623,18 @@ static int tg3_init_one(struct pci_dev *pdev, else tp->msg_enable = TG3_DEF_MSG_ENABLE; + if (pdev_is_ssb_gige_core(pdev)) { + tg3_flag_set(tp, IS_SSB_CORE); + if (ssb_gige_must_flush_posted_writes(pdev)) + tg3_flag_set(tp, FLUSH_POSTED_WRITES); + if (ssb_gige_one_dma_at_once(pdev)) + tg3_flag_set(tp, ONE_DMA_AT_ONCE); + if (ssb_gige_have_roboswitch(pdev)) + tg3_flag_set(tp, ROBOSWITCH); + if (ssb_gige_is_rgmii(pdev)) + tg3_flag_set(tp, RGMII_MODE); + } + /* The word/byte swap controls here control register access byte * swapping. DMA data byte swapping is controlled in the GRC_MODE * setting below. diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 9cd88a4..ef6ced2 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -3056,6 +3056,11 @@ enum TG3_FLAGS { TG3_FLAG_57765_PLUS, TG3_FLAG_57765_CLASS, TG3_FLAG_5717_PLUS, + TG3_FLAG_IS_SSB_CORE, + TG3_FLAG_FLUSH_POSTED_WRITES, + TG3_FLAG_ROBOSWITCH, + TG3_FLAG_ONE_DMA_AT_ONCE, + TG3_FLAG_RGMII_MODE, /* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */ TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0eb6579..907e7e5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2127,6 +2127,7 @@ #define PCI_DEVICE_ID_TIGON3_5754M 0x1672 #define PCI_DEVICE_ID_TIGON3_5755M 0x1673 #define PCI_DEVICE_ID_TIGON3_5756 0x1674 +#define PCI_DEVICE_ID_TIGON3_5750 0x1676 #define PCI_DEVICE_ID_TIGON3_5751 0x1677 #define PCI_DEVICE_ID_TIGON3_5715 0x1678 #define PCI_DEVICE_ID_TIGON3_5715S 0x1679 -- cgit v0.10.2 From 9646b1346760a0af1035f0c59ba727fca1f5824d Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 12 Dec 2012 10:14:22 +0200 Subject: wlcore: use single-role version when verifying the PLT firmware The PLT firmware used by wl12xx for calibration always has the same version number as the single-role firmware. Currntly the driver rejects the PLT firmware since anything that is not single-role uses the multi-role version. Fix this by using the single-role version for everything except multi-role. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index b58ae5f..77752b0 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -84,8 +84,8 @@ out: static int wlcore_validate_fw_ver(struct wl1271 *wl) { unsigned int *fw_ver = wl->chip.fw_ver; - unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ? - wl->min_sr_fw_ver : wl->min_mr_fw_ver; + unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ? + wl->min_mr_fw_ver : wl->min_sr_fw_ver; char min_fw_str[32] = ""; int i; -- cgit v0.10.2 From 3a0a8d961e20132272887d9826738ce9b4d818f7 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 23 Jan 2013 16:40:34 +0200 Subject: wlcore: remove unused set_power method There is no platform-specific set_power method anymore. Power setting is done in the bus modules (wlcore_sdio and wlcore_spi). Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index e1dfdf9..9a66acf 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5995,7 +5995,6 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) wl->irq = platform_get_irq(pdev, 0); wl->platform_quirks = pdata->platform_quirks; - wl->set_power = pdata->set_power; wl->if_ops = pdata->ops; if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index ebd8c6f..af9feca 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -183,7 +183,6 @@ struct wl1271 { struct wl1271_if_operations *if_ops; - void (*set_power)(bool enable); int irq; spinlock_t wl_lock; -- cgit v0.10.2 From afb43e6d88e587441c960a5d214d2c698d076c9c Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 25 Jan 2013 11:57:48 +0200 Subject: wlcore: remove if_ops from platform_data We can't pass pointers from the platform data to the modules, because with DT it cannot be done. Those pointers are not set by the board files anyway. It's the bus modules that set them, so they can be safely removed from the platform data without changing any board files. Create a new structure that the bus modules pass to wlcore. This structure contains the if_ops pointers and a pointer to the actual platform data. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 3254bfc..09694e3 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1703,7 +1703,8 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { static int wl12xx_setup(struct wl1271 *wl) { struct wl12xx_priv *priv = wl->priv; - struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data; + struct wl12xx_platform_data *pdata = pdev_data->pdata; wl->rtable = wl12xx_rtable; wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 9a66acf..cd70335 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5966,7 +5966,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) { struct wl1271 *wl = context; struct platform_device *pdev = wl->pdev; - struct wl12xx_platform_data *pdata = pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data; + struct wl12xx_platform_data *pdata = pdev_data->pdata; unsigned long irqflags; int ret; @@ -5995,7 +5996,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) wl->irq = platform_get_irq(pdev, 0); wl->platform_quirks = pdata->platform_quirks; - wl->if_ops = pdata->ops; + wl->if_ops = pdev_data->if_ops; if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) irqflags = IRQF_TRIGGER_RISING; diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index d4f184e..1f6f6e3 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -218,6 +218,7 @@ static int wl1271_probe(struct sdio_func *func, const struct sdio_device_id *id) { struct wl12xx_platform_data *wlan_data; + struct wlcore_platdev_data *pdev_data; struct wl12xx_sdio_glue *glue; struct resource res[1]; mmc_pm_flag_t mmcflags; @@ -228,10 +229,18 @@ static int wl1271_probe(struct sdio_func *func, if (func->num != 0x02) return -ENODEV; + pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) { + dev_err(&func->dev, "can't allocate platdev_data\n"); + goto out; + } + + pdev_data->if_ops = &sdio_ops; + glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&func->dev, "can't allocate glue\n"); - goto out; + goto out_free_pdev_data; } glue->dev = &func->dev; @@ -256,8 +265,6 @@ static int wl1271_probe(struct sdio_func *func, if (mmcflags & MMC_PM_KEEP_POWER) wlan_data->pwr_in_suspend = true; - wlan_data->ops = &sdio_ops; - sdio_set_drvdata(func, glue); /* Tell PM core that we don't need the card to be powered now */ @@ -295,8 +302,10 @@ static int wl1271_probe(struct sdio_func *func, goto out_dev_put; } - ret = platform_device_add_data(glue->core, wlan_data, - sizeof(*wlan_data)); + pdev_data->pdata = wlan_data; + + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); if (ret) { dev_err(glue->dev, "can't add platform data\n"); goto out_dev_put; @@ -315,6 +324,9 @@ out_dev_put: out_free_glue: kfree(glue); +out_free_pdev_data: + kfree(pdev_data); + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 2d700b7..d437f4d 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -328,6 +328,7 @@ static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; struct wl12xx_platform_data *pdata; + struct wlcore_platdev_data *pdev_data; struct resource res[1]; int ret = -ENOMEM; @@ -337,12 +338,18 @@ static int wl1271_probe(struct spi_device *spi) return -ENODEV; } - pdata->ops = &spi_ops; + pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) { + dev_err(&spi->dev, "can't allocate platdev_data\n"); + goto out; + } + + pdev_data->if_ops = &spi_ops; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&spi->dev, "can't allocate glue\n"); - goto out; + goto out_free_pdev_data; } glue->dev = &spi->dev; @@ -380,7 +387,10 @@ static int wl1271_probe(struct spi_device *spi) goto out_dev_put; } - ret = platform_device_add_data(glue->core, pdata, sizeof(*pdata)); + pdev_data->pdata = pdata; + + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); if (ret) { dev_err(glue->dev, "can't add platform data\n"); goto out_dev_put; @@ -399,6 +409,10 @@ out_dev_put: out_free_glue: kfree(glue); + +out_free_pdev_data: + kfree(pdev_data); + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 20316ac..c845b0e 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -206,6 +206,11 @@ struct wl1271_if_operations { void (*set_block_size) (struct device *child, unsigned int blksz); }; +struct wlcore_platdev_data { + struct wl12xx_platform_data *pdata; + struct wl1271_if_operations *if_ops; +}; + #define MAX_NUM_KEYS 14 #define MAX_KEY_SIZE 32 diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 0d63731..360c9bc 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -55,8 +55,6 @@ struct wl12xx_platform_data { int board_tcxo_clock; unsigned long platform_quirks; bool pwr_in_suspend; - - struct wl1271_if_operations *ops; }; /* Platform does not support level trigger interrupts */ -- cgit v0.10.2 From 91147a6cd0f599e1e2f5a904c37d73df58f9508f Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 23 Jan 2013 16:40:36 +0200 Subject: wlcore: use wl12xx_platform_data pointer from wlcore_pdev_data Just a small cleanup to use the pointer provided by wlcore_pdev_data instead of using a separate pointer then copying. Reviewed-by: Felipe Balbi Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 1f6f6e3..6d2884f 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -217,7 +217,6 @@ static struct wl1271_if_operations sdio_ops = { static int wl1271_probe(struct sdio_func *func, const struct sdio_device_id *id) { - struct wl12xx_platform_data *wlan_data; struct wlcore_platdev_data *pdev_data; struct wl12xx_sdio_glue *glue; struct resource res[1]; @@ -251,9 +250,9 @@ static int wl1271_probe(struct sdio_func *func, /* Use block mode for transferring over one block size of data */ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; - wlan_data = wl12xx_get_platform_data(); - if (IS_ERR(wlan_data)) { - ret = PTR_ERR(wlan_data); + pdev_data->pdata = wl12xx_get_platform_data(); + if (IS_ERR(pdev_data->pdata)) { + ret = PTR_ERR(pdev_data->pdata); dev_err(glue->dev, "missing wlan platform data: %d\n", ret); goto out_free_glue; } @@ -263,7 +262,7 @@ static int wl1271_probe(struct sdio_func *func, dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); if (mmcflags & MMC_PM_KEEP_POWER) - wlan_data->pwr_in_suspend = true; + pdev_data->pdata->pwr_in_suspend = true; sdio_set_drvdata(func, glue); @@ -292,7 +291,7 @@ static int wl1271_probe(struct sdio_func *func, memset(res, 0x00, sizeof(res)); - res[0].start = wlan_data->irq; + res[0].start = pdev_data->pdata->irq; res[0].flags = IORESOURCE_IRQ; res[0].name = "irq"; @@ -302,8 +301,6 @@ static int wl1271_probe(struct sdio_func *func, goto out_dev_put; } - pdev_data->pdata = wlan_data; - ret = platform_device_add_data(glue->core, pdev_data, sizeof(*pdev_data)); if (ret) { diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index d437f4d..d62a20b 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -327,23 +327,23 @@ static struct wl1271_if_operations spi_ops = { static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; - struct wl12xx_platform_data *pdata; struct wlcore_platdev_data *pdev_data; struct resource res[1]; int ret = -ENOMEM; - pdata = spi->dev.platform_data; - if (!pdata) { - dev_err(&spi->dev, "no platform data\n"); - return -ENODEV; - } - pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); if (!pdev_data) { dev_err(&spi->dev, "can't allocate platdev_data\n"); goto out; } + pdev_data->pdata = spi->dev.platform_data; + if (!pdev_data->pdata) { + dev_err(&spi->dev, "no platform data\n"); + ret = -ENODEV; + goto out_free_pdev_data; + } + pdev_data->if_ops = &spi_ops; glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -387,8 +387,6 @@ static int wl1271_probe(struct spi_device *spi) goto out_dev_put; } - pdev_data->pdata = pdata; - ret = platform_device_add_data(glue->core, pdev_data, sizeof(*pdev_data)); if (ret) { -- cgit v0.10.2 From 06ab4058ea418d8503458bea386961b9dd554356 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 23 Jan 2013 16:40:37 +0200 Subject: wlcore: use PLATFORM_DEVID_AUTO for plat dev creation to avoid conflicts The platform devices can be created by both wlcore_sdio and wlcore_spi. Theoretically, if both are connected to the same board, there will be a conflict. Reported-by: Felipe Balbi Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 6d2884f..198028d 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -280,7 +280,7 @@ static int wl1271_probe(struct sdio_func *func, else chip_family = "wl12xx"; - glue->core = platform_device_alloc(chip_family, -1); + glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device"); ret = -ENOMEM; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index d62a20b..5ad2e10 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -366,7 +366,7 @@ static int wl1271_probe(struct spi_device *spi) goto out_free_glue; } - glue->core = platform_device_alloc("wl12xx", -1); + glue->core = platform_device_alloc("wl12xx", PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device\n"); ret = -ENOMEM; -- cgit v0.10.2 From 6cc9efed707c575a9e5880ea68f8b9d36b235f1f Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 25 Jan 2013 12:05:34 +0200 Subject: wlcore: move wl12xx_platform_data up and make it truly optional The platform data is used not only by wlcore-based drivers, but also by wl1251. Move it up in the directory hierarchy to reflect this. Additionally, make it truly optional. At the moment, disabling platform data while wl1251_sdio or wlcore_sdio are enabled doesn't work, but it will be necessary when device tree support is implemented. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3985f35..a4ca63b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = 63, .deferred = true, }, -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA { .name = "wl1271", .mmc = 2, @@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = { .consumer_supplies = omap3evm_vio_supply, }; -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) @@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_NONE), OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { static void __init omap3_evm_wl12xx_init(void) { -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int ret; /* WL12xx WLAN Init */ diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig index be80011..cbe1e7f 100644 --- a/drivers/net/wireless/ti/Kconfig +++ b/drivers/net/wireless/ti/Kconfig @@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig" # keep last for automatic dependencies source "drivers/net/wireless/ti/wlcore/Kconfig" + +config WILINK_PLATFORM_DATA + bool "TI WiLink platform data" + depends on WLCORE_SDIO || WL1251_SDIO + default y + ---help--- + Small platform data bit needed to pass data to the sdio modules. + + endif # WL_TI diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile index 4d68239..af14231 100644 --- a/drivers/net/wireless/ti/Makefile +++ b/drivers/net/wireless/ti/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_WLCORE) += wlcore/ obj-$(CONFIG_WL12XX) += wl12xx/ -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/ obj-$(CONFIG_WL1251) += wl1251/ obj-$(CONFIG_WL18XX) += wl18xx/ + +# small builtin driver bit +obj-$(CONFIG_WILINK_PLATFORM_DATA) += wilink_platform_data.o diff --git a/drivers/net/wireless/ti/wilink_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c new file mode 100644 index 0000000..998e958 --- /dev/null +++ b/drivers/net/wireless/ti/wilink_platform_data.c @@ -0,0 +1,49 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2010-2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +static struct wl12xx_platform_data *platform_data; + +int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data) +{ + if (platform_data) + return -EBUSY; + if (!data) + return -EINVAL; + + platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL); + if (!platform_data) + return -ENOMEM; + + return 0; +} + +struct wl12xx_platform_data *wl12xx_get_platform_data(void) +{ + if (!platform_data) + return ERR_PTR(-ENODEV); + + return platform_data; +} +EXPORT_SYMBOL(wl12xx_get_platform_data); diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index d7b907e..2b83282 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -33,8 +33,3 @@ config WLCORE_SDIO If you choose to build a module, it'll be called wlcore_sdio. Say N if unsure. - -config WL12XX_PLATFORM_DATA - bool - depends on WLCORE_SDIO != n || WL1251_SDIO != n - default y diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile index d9fba9e..b21398f 100644 --- a/drivers/net/wireless/ti/wlcore/Makefile +++ b/drivers/net/wireless/ti/wlcore/Makefile @@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE) += wlcore.o obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o -# small builtin driver bit -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o - ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c b/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c deleted file mode 100644 index 998e958..0000000 --- a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of wl12xx - * - * Copyright (C) 2010-2011 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include - -static struct wl12xx_platform_data *platform_data; - -int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data) -{ - if (platform_data) - return -EBUSY; - if (!data) - return -EINVAL; - - platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL); - if (!platform_data) - return -ENOMEM; - - return 0; -} - -struct wl12xx_platform_data *wl12xx_get_platform_data(void) -{ - if (!platform_data) - return ERR_PTR(-ENODEV); - - return platform_data; -} -EXPORT_SYMBOL(wl12xx_get_platform_data); diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 360c9bc..a54fe82 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,6 +24,8 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H +#include + /* Reference clock values */ enum { WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ @@ -60,10 +62,12 @@ struct wl12xx_platform_data { /* Platform does not support level trigger interrupts */ #define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); +struct wl12xx_platform_data *wl12xx_get_platform_data(void); + #else static inline @@ -72,8 +76,12 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data) return -ENOSYS; } -#endif +static inline +struct wl12xx_platform_data *wl12xx_get_platform_data(void) +{ + return ERR_PTR(-ENODATA); +} -struct wl12xx_platform_data *wl12xx_get_platform_data(void); +#endif #endif -- cgit v0.10.2 From 5dc283fe9ab360433aa05fcbe0f43cad40f68774 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 30 Jan 2013 10:53:14 +0200 Subject: wlcore: don't hide real error code when booting fails There's no need to hide the actual error that was reported when booting fails. For instance, on I/O error, we were returing -EINVALID, which doesn't make sense at all. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index cd70335..28a3757 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2162,7 +2162,7 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) return 0; } -static bool wl12xx_init_fw(struct wl1271 *wl) +static int wl12xx_init_fw(struct wl1271 *wl) { int retries = WL1271_BOOT_RETRIES; bool booted = false; @@ -2228,7 +2228,7 @@ power_off: wl->state = WLCORE_STATE_ON; out: - return booted; + return ret; } static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif) @@ -2371,7 +2371,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, struct vif_counter_data vif_count; int ret = 0; u8 role_type; - bool booted = false; vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | IEEE80211_VIF_SUPPORTS_CQM_RSSI; @@ -2432,11 +2431,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, */ memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN); - booted = wl12xx_init_fw(wl); - if (!booted) { - ret = -EINVAL; + ret = wl12xx_init_fw(wl); + if (ret < 0) goto out; - } } ret = wl12xx_cmd_role_enable(wl, vif->addr, -- cgit v0.10.2 From 1d6146659ef7ae10263d490a9554ff0bfc7f6ecd Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Thu, 27 Dec 2012 15:49:47 +0200 Subject: wl18xx: add new phy configuration parameters for telec support Add back-off settings to the wl18xx_mac_and_phy_params. We had an empty space where the new parameters are added, so this change doesn't affect backwards-compatibility with older firmwares. Update WL18XX_CONF_VERSION accordingly. Signed-off-by: Victor Goldenshtein Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index b5f1148..e34302e 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,7 +23,7 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0006) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) @@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params { u8 pwr_limit_reference_11_abg; u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; u8 pwr_limit_reference_11p; - u8 spare1[9]; - u8 spare2[9]; + u8 spare1; + u8 per_chan_bo_mode_11_abg[13]; + u8 per_chan_bo_mode_11_p[4]; u8 primary_clock_setting_time; u8 clock_valid_on_wake_up; u8 secondary_clock_setting_time; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0be1cfc..a10b7a7 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .pwr_limit_reference_11p = 0x64, + .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00 }, + .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 }, .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .psat = 0, -- cgit v0.10.2 From 9c3a8d99346040010a82ae8088b055f85cf8a2e9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 7 Feb 2013 11:35:33 +0200 Subject: wlcore: fix wrong remote rates when starting STA role In wl18xx, we use a new ACX command in order to set the remote supported rates, once we know it (ie. after association). The wl12xx firmware doesn't support changing the rates after the STA is started, so we need to use all supported rates. Commit 530abe19 (wlcore: add ACX_PEER_CAP command) broke that by using wlvif->rate_set when starting the STA role. Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1201aca..6331f9e 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -510,10 +510,12 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->sta.hlid = wlvif->sta.hlid; cmd->sta.session = wl->session_ids[wlvif->sta.hlid]; /* - * We don't have the correct remote rates in this stage. the rates - * will be reconfigured later, after authorization. + * We don't have the correct remote rates in this stage. The + * rates will be reconfigured later, after association, if the + * firmware supports ACX_PEER_CAP. Otherwise, there's nothing + * we can do, so use all supported_rates here. */ - cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set); + cmd->sta.remote_rates = cpu_to_le32(supported_rates); wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d " "basic_rate_set: 0x%x, remote_rates: 0x%x", -- cgit v0.10.2 From e0af11fa0df30bc645e6abb4d3ddc7ed05af0451 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 14 Jan 2013 20:35:22 +0100 Subject: NFC: microread: Add MEI physical layer On some peculiar worlds, microreads are found hidden behind MEIs and needs to be accessed through the ME bus. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig index cd6744b..572305b 100644 --- a/drivers/nfc/microread/Kconfig +++ b/drivers/nfc/microread/Kconfig @@ -22,3 +22,14 @@ config NFC_MICROREAD_I2C If you choose to build a module, it'll be called microread_i2c. Say N if unsure. + +config NFC_MICROREAD_MEI + tristate "NFC Microread MEI support" + depends on NFC_MICROREAD && INTEL_MEI_BUS_NFC + ---help--- + This module adds support for the mei interface of adapters using + Inside microread chipsets. Select this if your microread chipset + is handled by Intel's Management Engine Interface on your platform. + + If you choose to build a module, it'll be called microread_mei. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile index 74c1851..755c24c 100644 --- a/drivers/nfc/microread/Makefile +++ b/drivers/nfc/microread/Makefile @@ -3,6 +3,8 @@ # microread_i2c-objs = i2c.o +microread_mei-objs = mei.o obj-$(CONFIG_NFC_MICROREAD) += microread.o obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o +obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c new file mode 100644 index 0000000..c078e56 --- /dev/null +++ b/drivers/nfc/microread/mei.c @@ -0,0 +1,241 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "microread.h" + +#define MICROREAD_DRIVER_NAME "microread" + +#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \ + 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) + +struct mei_nfc_hdr { + u8 cmd; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; +} __attribute__((packed)); + +#define MEI_NFC_HEADER_SIZE 10 +#define MEI_NFC_MAX_HCI_PAYLOAD 300 +#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD) + +struct microread_mei_phy { + struct mei_bus_client *client; + struct nfc_hci_dev *hdev; + + int powered; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define MEI_DUMP_SKB_IN(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "mei in : ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +#define MEI_DUMP_SKB_OUT(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "mei out: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static int microread_mei_enable(void *phy_id) +{ + struct microread_mei_phy *phy = phy_id; + + pr_info(DRIVER_DESC ": %s\n", __func__); + + phy->powered = 1; + + return 0; +} + +static void microread_mei_disable(void *phy_id) +{ + struct microread_mei_phy *phy = phy_id; + + pr_info(DRIVER_DESC ": %s\n", __func__); + + phy->powered = 0; +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int microread_mei_write(void *phy_id, struct sk_buff *skb) +{ + struct microread_mei_phy *phy = phy_id; + int r; + + MEI_DUMP_SKB_OUT("mei frame sent", skb); + + r = mei_bus_send(phy->client, skb->data, skb->len); + if (r > 0) + r = 0; + + return r; +} + +static void microread_event_cb(struct mei_bus_client *client, u32 events, + void *context) +{ + struct microread_mei_phy *phy = context; + + if (phy->hard_fault != 0) + return; + + if (events & BIT(MEI_BUS_EVENT_RX)) { + struct sk_buff *skb; + int reply_size; + + skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL); + if (!skb) + return; + + reply_size = mei_bus_recv(client, skb->data, MEI_NFC_MAX_READ); + if (reply_size < MEI_NFC_HEADER_SIZE) { + kfree(skb); + return; + } + + skb_put(skb, reply_size); + skb_pull(skb, MEI_NFC_HEADER_SIZE); + + MEI_DUMP_SKB_IN("mei frame read", skb); + + nfc_hci_recv_frame(phy->hdev, skb); + } +} + +static struct nfc_phy_ops mei_phy_ops = { + .write = microread_mei_write, + .enable = microread_mei_enable, + .disable = microread_mei_disable, +}; + +static int microread_mei_probe(struct mei_bus_client *client) +{ + struct microread_mei_phy *phy; + int r; + + pr_info("Probing NFC microread\n"); + + phy = kzalloc(sizeof(struct microread_mei_phy), GFP_KERNEL); + if (!phy) { + pr_err("Cannot allocate memory for microread mei phy.\n"); + return -ENOMEM; + } + + phy->client = client; + mei_bus_set_clientdata(client, phy); + + r = mei_bus_register_event_cb(client, microread_event_cb, phy); + if (r) { + pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); + goto err_out; + } + + r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, + MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, + &phy->hdev); + if (r < 0) + goto err_out; + + return 0; + +err_out: + kfree(phy); + + return r; +} + +static int microread_mei_remove(struct mei_bus_client *client) +{ + struct microread_mei_phy *phy = mei_bus_get_clientdata(client); + + pr_info("Removing microread\n"); + + microread_remove(phy->hdev); + + if (phy->powered) + microread_mei_disable(phy); + + kfree(phy); + + return 0; +} + +static struct mei_bus_driver microread_driver = { + .driver = { + .name = MICROREAD_DRIVER_NAME, + }, + .id = { + .name = MICROREAD_DRIVER_NAME, + .uuid = MICROREAD_UUID, + }, + + .probe = microread_mei_probe, + .remove = microread_mei_remove, +}; + +static int microread_mei_init(void) +{ + int r; + + pr_debug(DRIVER_DESC ": %s\n", __func__); + + r = mei_driver_register(µread_driver); + if (r) { + pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n"); + return r; + } + + return 0; +} + +static void microread_mei_exit(void) +{ + mei_driver_unregister(µread_driver); +} + +module_init(microread_mei_init); +module_exit(microread_mei_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v0.10.2 From 52f2eaeec11c16c219f0e99b8496fbba86889830 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Tue, 5 Feb 2013 10:08:35 +0100 Subject: NFC: pn533: Fix target polling mode Remove unneeded bitwise OR operator on uninitialized sk_buff data Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index bd5c41b..f0f6763 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1378,7 +1378,7 @@ static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev) return NULL; /* DEP support only */ - *skb_put(skb, 1) |= PN533_INIT_TARGET_DEP; + *skb_put(skb, 1) = PN533_INIT_TARGET_DEP; /* MIFARE params */ memcpy(skb_put(skb, 6), mifare_params, 6); -- cgit v0.10.2 From e9a4aa3ba386c8a368baaadde6f9e5c3d5f17cfe Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 31 Jan 2013 11:16:46 +0300 Subject: NFC: llcp: integer underflow in nfc_llcp_set_remote_gb() If gb_len is less than 3 it would cause an integer underflow and possibly memory corruption in nfc_llcp_parse_gb_tlv(). I removed the old test for gb_len == 0. I also removed the test for ->remote_gb == NULL. It's not possible for ->remote_gb to be NULL and we have already dereferenced ->remote_gb_len so it's too late to test. The old test return -ENODEV but my test returns -EINVAL. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 85bc75c..746f5a2 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -549,14 +549,13 @@ int nfc_llcp_set_remote_gb(struct nfc_dev *dev, u8 *gb, u8 gb_len) pr_err("No LLCP device\n"); return -ENODEV; } + if (gb_len < 3) + return -EINVAL; memset(local->remote_gb, 0, NFC_MAX_GT_LEN); memcpy(local->remote_gb, gb, gb_len); local->remote_gb_len = gb_len; - if (local->remote_gb == NULL || local->remote_gb_len == 0) - return -ENODEV; - if (memcmp(local->remote_gb, llcp_magic, 3)) { pr_err("MAC does not support LLCP\n"); return -EINVAL; -- cgit v0.10.2 From 12b6639897fa57a1ca34b43d078779c92472ad74 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sat, 2 Feb 2013 03:33:44 +0100 Subject: wireless: rt2x00: rt2800usb add Sweex ids Info coming from Sweex Windows driver and wikidevi.com 0x177f,0x0163 Sweex LW163 RT3370 1x1, int. antenna 0x177f,0x0164 Sweex LW164 RT8070 1x1, Nano dongle 0x177f,0x0165 Sweex LW165 RT3370 1x1, ext. antenna 0x177f,0x0324 Sweex LW324 RT3072 2x2 with 32Mb NOR flash, autoinstall Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 42b5b65..8a57646 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1099,9 +1099,11 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x15a9, 0x0006) }, /* Sweex */ { USB_DEVICE(0x177f, 0x0153) }, + { USB_DEVICE(0x177f, 0x0164) }, { USB_DEVICE(0x177f, 0x0302) }, { USB_DEVICE(0x177f, 0x0313) }, { USB_DEVICE(0x177f, 0x0323) }, + { USB_DEVICE(0x177f, 0x0324) }, /* U-Media */ { USB_DEVICE(0x157e, 0x300e) }, { USB_DEVICE(0x157e, 0x3013) }, @@ -1133,6 +1135,9 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x148f, 0x8070) }, /* Sitecom */ { USB_DEVICE(0x0df6, 0x0050) }, + /* Sweex */ + { USB_DEVICE(0x177f, 0x0163) }, + { USB_DEVICE(0x177f, 0x0165) }, #endif #ifdef CONFIG_RT2800USB_RT35XX /* Allwin */ -- cgit v0.10.2 From e48caab206c853272637427d9ae82fc431b4bd24 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Mon, 4 Feb 2013 22:43:22 +0100 Subject: net: wireless/rtlwifi: fix uninitialized variable issue The use of variable packet_beacon might be uninitialized in the two files, which is same as this patch: https://patchwork.kernel.org/patch/2006711/ Signed-off-by: Cong Ding Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index c31795e..da0e902 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -488,7 +488,7 @@ static void _rtl92ce_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; __le16 fc; u16 type, c_fc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c index 32ff959..85b6bdb 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c @@ -1084,7 +1084,7 @@ void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; __le16 fc; u16 type, cpu_fc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; hdr = (struct ieee80211_hdr *)tmp_buf; -- cgit v0.10.2 From fc5bc165b030dc8f20d69bcf46f86c9b52eb481a Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Tue, 5 Feb 2013 16:59:17 +0100 Subject: mwl8k: add single band 88W8366 PCI device IDs Add PCI deviceIDs for single band versions of 88W8366, found e.g. in simultaneous dual band routers based on kirkwood. Signed-off-by: Jonas Gorski Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 2031130..51634f2 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5473,6 +5473,8 @@ static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = { { PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, }, { PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, }, { PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, }, + { PCI_VDEVICE(MARVELL, 0x2a41), .driver_data = MWL8366, }, + { PCI_VDEVICE(MARVELL, 0x2a42), .driver_data = MWL8366, }, { PCI_VDEVICE(MARVELL, 0x2a43), .driver_data = MWL8366, }, { }, }; -- cgit v0.10.2 From 008e33f733ca51acb2dd9d88ea878693b04d1d2a Mon Sep 17 00:00:00 2001 From: Tomasz Guszkowski Date: Tue, 5 Feb 2013 22:10:31 +0100 Subject: p54usb: corrected USB ID for T-Com Sinus 154 data II Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The device was tested in managed mode with no security, WEP 128 bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum: 7d676323ac60d6e1a3b6d61e8c528248). It works. Signed-off-by: Tomasz Guszkowski Cc: Acked-By: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 800a165..1f78585 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -84,8 +84,8 @@ static struct usb_device_id p54u_table[] = { {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ - {USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */ {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ + {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */ {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */ {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ -- cgit v0.10.2 From 05dde977bfe35a5c9816763fa9c26732e10b8a5b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:36 +0100 Subject: brcmfmac: Remove drvr_up from bus interface. The tracking of up/down status in bus interface is unnecessary. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 64c38f4..57826dc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -72,7 +72,6 @@ struct brcmf_bus_ops { * @drvr: public driver information. * @state: operational state of the bus interface. * @maxctl: maximum size for rxctl request message. - * @drvr_up: indicates driver up/down status. * @tx_realloc: number of tx packets realloced for headroom. * @dstats: dongle-based statistical data. * @align: alignment requirement for the bus. @@ -87,7 +86,6 @@ struct brcmf_bus { struct brcmf_pub *drvr; enum brcmf_bus_state state; uint maxctl; - bool drvr_up; unsigned long tx_realloc; struct dngl_stats dstats; u8 align; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e3326a5..2104a4f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -452,13 +452,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) sprintf(info.driver, "dhd"); strcpy(info.version, BRCMF_VERSION_STR); } - - /* otherwise, require dongle to be up */ - else if (!drvr->bus_if->drvr_up) { - brcmf_err("dongle is not up\n"); - return -ENODEV; - } - /* finally, report dongle driver type */ + /* report dongle driver type */ else sprintf(info.driver, "wl"); @@ -545,18 +539,11 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, static int brcmf_netdev_stop(struct net_device *ndev) { - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_pub *drvr = ifp->drvr; - brcmf_dbg(TRACE, "Enter\n"); - if (drvr->bus_if->drvr_up == 0) - return 0; - brcmf_cfg80211_down(ndev); /* Set state and stop OS transmissions */ - drvr->bus_if->drvr_up = false; netif_stop_queue(ndev); return 0; @@ -591,7 +578,6 @@ static int brcmf_netdev_open(struct net_device *ndev) /* Allow transmit calls */ netif_start_queue(ndev); - drvr->bus_if->drvr_up = true; if (brcmf_cfg80211_up(ndev)) { brcmf_err("failed to bring up cfg80211\n"); return -1; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 7fef9b5..df8a185 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1962,8 +1962,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) } /* Deflow-control stack if needed */ - if (bus->sdiodev->bus_if->drvr_up && - (bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) && + if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) && bus->txoff && (pktq_len(&bus->txq) < TXLOW)) { bus->txoff = false; brcmf_txflowblock(bus->sdiodev->dev, false); @@ -3308,9 +3307,6 @@ static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus) { int ret; - if (bus->sdiodev->bus_if->drvr_up) - return -EISCONN; - ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME, &bus->sdiodev->func[2]->dev); if (ret) { -- cgit v0.10.2 From 4412f6cb8139a4503f77b67c3b6a18883a4b6191 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:37 +0100 Subject: brcmfmac: Remove copy mac address from drvr at netdev up. At netdev up the mac address from drvr is copied to netdev mac address. This is incorrect and mac address was already set by brcmf_net_attach by copying it from ifp. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 2104a4f..7554125 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -567,8 +567,6 @@ static int brcmf_netdev_open(struct net_device *ndev) atomic_set(&drvr->pend_8021x_cnt, 0); - memcpy(ndev->dev_addr, drvr->mac, ETH_ALEN); - /* Get current TOE mode from dongle */ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 && (toe_ol & TOE_TX_CSUM_OL) != 0) -- cgit v0.10.2 From 1f17011039f0d53f24503a01a1dcd48ae28e5305 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:38 +0100 Subject: brcmfmac: Use struct brcmf_if in brcmf_configure_opensecurity. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 62a528e..0f170cb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2968,9 +2968,8 @@ static int brcmf_cfg80211_testmode(struct wiphy *wiphy, void *data, int len) } #endif -static s32 brcmf_configure_opensecurity(struct net_device *ndev, s32 bssidx) +static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp) { - struct brcmf_if *ifp = netdev_priv(ndev); s32 err; /* set auth */ @@ -3433,7 +3432,6 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_tlv *rsn_ie; struct brcmf_vs_tlv *wpa_ie; struct brcmf_join_params join_params; - s32 bssidx = 0; brcmf_dbg(TRACE, "channel_type=%d, beacon_interval=%d, dtim_period=%d,\n", cfg80211_get_chandef_type(&settings->chandef), @@ -3507,7 +3505,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } } else { brcmf_dbg(TRACE, "No WPA(2) IEs found\n"); - brcmf_configure_opensecurity(ndev, bssidx); + brcmf_configure_opensecurity(ifp); } /* Set Beacon IEs to FW */ err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), -- cgit v0.10.2 From 10ef73215c9fdb0858950707827125bf261acb8f Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:39 +0100 Subject: brcmfmac: Track pending 8021x frames per ifp. Pending 8021x frames were tracked per dongle. This should be done per ifp. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index a2f32fb..f0e81a8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -489,9 +489,6 @@ struct brcmf_pub { struct mutex proto_block; unsigned char proto_buf[BRCMF_DCMD_MAXLEN]; - atomic_t pend_8021x_cnt; - wait_queue_head_t pend_8021x_wait; - struct brcmf_fweh_info fweh; #ifdef DEBUG struct dentry *dbgfs_dir; @@ -518,6 +515,8 @@ struct brcmf_cfg80211_vif; * @idx: interface index in device firmware. * @bssidx: index of bss associated with this interface. * @mac_addr: assigned mac address. + * @pend_8021x_cnt: tracks outstanding number of 802.1x frames. + * @pend_8021x_wait: used for signalling change in count. */ struct brcmf_if { struct brcmf_pub *drvr; @@ -529,6 +528,8 @@ struct brcmf_if { int idx; s32 bssidx; u8 mac_addr[ETH_ALEN]; + atomic_t pend_8021x_cnt; + wait_queue_head_t pend_8021x_wait; }; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 7554125..9a4494a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -217,7 +217,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, if (is_multicast_ether_addr(eh->h_dest)) drvr->tx_multicast++; if (ntohs(eh->h_proto) == ETH_P_PAE) - atomic_inc(&drvr->pend_8021x_cnt); + atomic_inc(&ifp->pend_8021x_cnt); /* If the protocol uses a data header, apply it */ brcmf_proto_hdrpush(drvr, ifp->idx, skb); @@ -348,6 +348,7 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) u16 type; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_if *ifp; brcmf_proto_hdrpull(drvr, &ifidx, txp); @@ -355,9 +356,10 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) type = ntohs(eh->h_proto); if (type == ETH_P_PAE) { - atomic_dec(&drvr->pend_8021x_cnt); - if (waitqueue_active(&drvr->pend_8021x_wait)) - wake_up(&drvr->pend_8021x_wait); + ifp = drvr->iflist[ifidx]; + atomic_dec(&ifp->pend_8021x_cnt); + if (waitqueue_active(&ifp->pend_8021x_wait)) + wake_up(&ifp->pend_8021x_wait); } } @@ -565,7 +567,7 @@ static int brcmf_netdev_open(struct net_device *ndev) return -EAGAIN; } - atomic_set(&drvr->pend_8021x_cnt, 0); + atomic_set(&ifp->pend_8021x_cnt, 0); /* Get current TOE mode from dongle */ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 @@ -686,6 +688,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); + init_waitqueue_head(&ifp->pend_8021x_wait); + if (addr_mask != NULL) for (i = 0; i < ETH_ALEN; i++) ifp->mac_addr[i] = drvr->mac[i] ^ addr_mask[i]; @@ -763,8 +767,6 @@ int brcmf_attach(uint bus_hdrlen, struct device *dev) INIT_LIST_HEAD(&drvr->bus_if->dcmd_list); - init_waitqueue_head(&drvr->pend_8021x_wait); - return ret; fail: @@ -879,19 +881,18 @@ void brcmf_detach(struct device *dev) kfree(drvr); } -static int brcmf_get_pend_8021x_cnt(struct brcmf_pub *drvr) +static int brcmf_get_pend_8021x_cnt(struct brcmf_if *ifp) { - return atomic_read(&drvr->pend_8021x_cnt); + return atomic_read(&ifp->pend_8021x_cnt); } int brcmf_netdev_wait_pend8021x(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_pub *drvr = ifp->drvr; int err; - err = wait_event_timeout(drvr->pend_8021x_wait, - !brcmf_get_pend_8021x_cnt(drvr), + err = wait_event_timeout(ifp->pend_8021x_wait, + !brcmf_get_pend_8021x_cnt(ifp), msecs_to_jiffies(MAX_WAIT_FOR_8021X_TX)); WARN_ON(!err); -- cgit v0.10.2 From 659c84ff3f1b979a91b726a65ab7f8091e019f2b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:40 +0100 Subject: brcmfmac: Add logging for FIL int set/get cmds. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c index d8d8b65..f6ffcf6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c @@ -100,6 +100,7 @@ brcmf_fil_cmd_int_set(struct brcmf_if *ifp, u32 cmd, u32 data) __le32 data_le = cpu_to_le32(data); mutex_lock(&ifp->drvr->proto_block); + brcmf_dbg(FIL, "cmd=%d, value=%d\n", cmd, data); err = brcmf_fil_cmd_data(ifp, cmd, &data_le, sizeof(data_le), true); mutex_unlock(&ifp->drvr->proto_block); @@ -116,6 +117,7 @@ brcmf_fil_cmd_int_get(struct brcmf_if *ifp, u32 cmd, u32 *data) err = brcmf_fil_cmd_data(ifp, cmd, &data_le, sizeof(data_le), false); mutex_unlock(&ifp->drvr->proto_block); *data = le32_to_cpu(data_le); + brcmf_dbg(FIL, "cmd=%d, value=%d\n", cmd, *data); return err; } -- cgit v0.10.2 From b1a2a41126fc582a3d5613aa2d3e632b2eb1a2c4 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:41 +0100 Subject: brcmfmac: Track statistics per ifp. Statistics were tracked by bus driver while it is to be tracked per ifp/netdev. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 57826dc..6af7c9d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -24,18 +24,6 @@ enum brcmf_bus_state { BRCMF_BUS_DATA /* Ready for frame transfers */ }; -struct dngl_stats { - unsigned long rx_packets; /* total packets received */ - unsigned long tx_packets; /* total packets transmitted */ - unsigned long rx_bytes; /* total bytes received */ - unsigned long tx_bytes; /* total bytes transmitted */ - unsigned long rx_errors; /* bad packets received */ - unsigned long tx_errors; /* packet transmit problems */ - unsigned long rx_dropped; /* packets dropped by dongle */ - unsigned long tx_dropped; /* packets dropped by dongle */ - unsigned long multicast; /* multicast packets received */ -}; - struct brcmf_bus_dcmd { char *name; char *param; @@ -87,7 +75,6 @@ struct brcmf_bus { enum brcmf_bus_state state; uint maxctl; unsigned long tx_realloc; - struct dngl_stats dstats; u8 align; struct list_head dcmd_list; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 9a4494a..05cae37 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -226,10 +226,12 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, ret = brcmf_bus_txdata(drvr->bus_if, skb); done: - if (ret) - drvr->bus_if->dstats.tx_dropped++; - else - drvr->bus_if->dstats.tx_packets++; + if (ret) { + ifp->stats.tx_dropped++; + } else { + ifp->stats.tx_packets++; + ifp->stats.tx_bytes += skb->len; + } /* Return ok: we always eat the packet */ return NETDEV_TX_OK; @@ -270,12 +272,13 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) skb_queue_walk_safe(skb_list, skb, pnext) { skb_unlink(skb, skb_list); - /* process and remove protocol-specific header - */ + /* process and remove protocol-specific header */ ret = brcmf_proto_hdrpull(drvr, &ifidx, skb); - if (ret < 0) { - if (ret != -ENODATA) - bus_if->dstats.rx_errors++; + ifp = drvr->iflist[ifidx]; + + if (ret || !ifp || !ifp->ndev) { + if ((ret != -ENODATA) && ifp) + ifp->stats.rx_errors++; brcmu_pkt_buf_free_skb(skb); continue; } @@ -295,21 +298,11 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) eth = skb->data; len = skb->len; - ifp = drvr->iflist[ifidx]; - if (ifp == NULL) - ifp = drvr->iflist[0]; - - if (!ifp || !ifp->ndev || - ifp->ndev->reg_state != NETREG_REGISTERED) { - brcmu_pkt_buf_free_skb(skb); - continue; - } - skb->dev = ifp->ndev; skb->protocol = eth_type_trans(skb, skb->dev); if (skb->pkt_type == PACKET_MULTICAST) - bus_if->dstats.multicast++; + ifp->stats.multicast++; skb->data = eth; skb->len = len; @@ -325,8 +318,13 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) ifp->ndev->last_rx = jiffies; } - bus_if->dstats.rx_bytes += skb->len; - bus_if->dstats.rx_packets++; /* Local count */ + if (!(ifp->ndev->flags & IFF_UP)) { + brcmu_pkt_buf_free_skb(skb); + continue; + } + + ifp->stats.rx_bytes += skb->len; + ifp->stats.rx_packets++; if (in_interrupt()) netif_rx(skb); @@ -352,35 +350,28 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) brcmf_proto_hdrpull(drvr, &ifidx, txp); + ifp = drvr->iflist[ifidx]; + if (!ifp) + return; + eh = (struct ethhdr *)(txp->data); type = ntohs(eh->h_proto); if (type == ETH_P_PAE) { - ifp = drvr->iflist[ifidx]; atomic_dec(&ifp->pend_8021x_cnt); if (waitqueue_active(&ifp->pend_8021x_wait)) wake_up(&ifp->pend_8021x_wait); } + if (!success) + ifp->stats.tx_errors++; } static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_bus *bus_if = ifp->drvr->bus_if; brcmf_dbg(TRACE, "Enter\n"); - /* Copy dongle stats to net device stats */ - ifp->stats.rx_packets = bus_if->dstats.rx_packets; - ifp->stats.tx_packets = bus_if->dstats.tx_packets; - ifp->stats.rx_bytes = bus_if->dstats.rx_bytes; - ifp->stats.tx_bytes = bus_if->dstats.tx_bytes; - ifp->stats.rx_errors = bus_if->dstats.rx_errors; - ifp->stats.tx_errors = bus_if->dstats.tx_errors; - ifp->stats.rx_dropped = bus_if->dstats.rx_dropped; - ifp->stats.tx_dropped = bus_if->dstats.tx_dropped; - ifp->stats.multicast = bus_if->dstats.multicast; - return &ifp->stats; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index df8a185..d424dd6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1096,7 +1096,6 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL && type != BRCMF_SDIO_FT_SUPER) { brcmf_err("HW header length too long\n"); - bus->sdiodev->bus_if->dstats.rx_errors++; bus->sdcnt.rx_toolong++; brcmf_sdbrcm_rxfail(bus, false, false); rd->len = 0; @@ -1298,7 +1297,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) if (errcode < 0) { brcmf_err("glom read of %d bytes failed: %d\n", dlen, errcode); - bus->sdiodev->bus_if->dstats.rx_errors++; sdio_claim_host(bus->sdiodev->func[1]); if (bus->glomerr++ < 3) { @@ -1478,7 +1476,6 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte control read exceeds %d-byte buffer\n", rdlen, bus->sdiodev->bus_if->maxctl); - bus->sdiodev->bus_if->dstats.rx_errors++; brcmf_sdbrcm_rxfail(bus, false, false); goto done; } @@ -1486,7 +1483,6 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if ((len - doff) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", len, len - doff, bus->sdiodev->bus_if->maxctl); - bus->sdiodev->bus_if->dstats.rx_errors++; bus->sdcnt.rx_toolong++; brcmf_sdbrcm_rxfail(bus, false, false); goto done; @@ -1634,7 +1630,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) if (!pkt) { /* Give up on data, request rtx of events */ brcmf_err("brcmu_pkt_buf_get_skb failed\n"); - bus->sdiodev->bus_if->dstats.rx_dropped++; brcmf_sdbrcm_rxfail(bus, false, RETRYCHAN(rd->channel)); sdio_release_host(bus->sdiodev->func[1]); @@ -1652,7 +1647,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) brcmf_err("read %d bytes from channel %d failed: %d\n", rd->len, rd->channel, sdret); brcmu_pkt_buf_free_skb(pkt); - bus->sdiodev->bus_if->dstats.rx_errors++; sdio_claim_host(bus->sdiodev->func[1]); brcmf_sdbrcm_rxfail(bus, true, RETRYCHAN(rd->channel)); @@ -1940,10 +1934,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) datalen = pkt->len - SDPCM_HDRLEN; ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, true); - if (ret) - bus->sdiodev->bus_if->dstats.tx_errors++; - else - bus->sdiodev->bus_if->dstats.tx_bytes += datalen; /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index e15630c..06f7339 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -421,10 +421,6 @@ static void brcmf_usb_tx_complete(struct urb *urb) brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status, req->skb); brcmf_usb_del_fromq(devinfo, req); - if (urb->status == 0) - devinfo->bus_pub.bus->dstats.tx_packets++; - else - devinfo->bus_pub.bus->dstats.tx_errors++; brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0); @@ -451,10 +447,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) req->skb = NULL; /* zero lenght packets indicate usb "failure". Do not refill */ - if (urb->status == 0 && urb->actual_length) { - devinfo->bus_pub.bus->dstats.rx_packets++; - } else { - devinfo->bus_pub.bus->dstats.rx_errors++; + if (urb->status != 0 || !urb->actual_length) { brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); return; -- cgit v0.10.2 From 94889b1fb51ff6c81be2926890f29d0cfe150e75 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:42 +0100 Subject: brcmfmac: Update tracelogging for multiple netdevs. When supporting multiple netdevs it is usefull to log idx in netdev related functions. This will be used for features like P2P. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 05cae37..a09c077 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -70,9 +70,10 @@ static void _brcmf_set_multicast_list(struct work_struct *work) u32 buflen; s32 err; - brcmf_dbg(TRACE, "enter\n"); - ifp = container_of(work, struct brcmf_if, multicast_work); + + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + ndev = ifp->ndev; /* Determine initial value of allmulti flag */ @@ -129,9 +130,10 @@ _brcmf_set_mac_address(struct work_struct *work) struct brcmf_if *ifp; s32 err; - brcmf_dbg(TRACE, "enter\n"); - ifp = container_of(work, struct brcmf_if, setmacaddr_work); + + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr, ETH_ALEN); if (err < 0) { @@ -168,7 +170,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, struct brcmf_pub *drvr = ifp->drvr; struct ethhdr *eh; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); /* Can the device send data? */ if (drvr->bus_if->state != BRCMF_BUS_DATA) { @@ -370,7 +372,7 @@ static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); return &ifp->stats; } @@ -422,7 +424,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) u32 toe_cmpnt, csum_dir; int ret; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); /* all ethtool calls start with a cmd word */ if (copy_from_user(&cmd, uaddr, sizeof(u32))) @@ -519,7 +521,7 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; - brcmf_dbg(TRACE, "ifidx %d, cmd 0x%04x\n", ifp->idx, cmd); + brcmf_dbg(TRACE, "Enter, bssidx=%d, cmd=0x%04x\n", ifp->idx, cmd); if (!drvr->iflist[ifp->idx]) return -1; @@ -532,7 +534,9 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, static int brcmf_netdev_stop(struct net_device *ndev) { - brcmf_dbg(TRACE, "Enter\n"); + struct brcmf_if *ifp = netdev_priv(ndev); + + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); brcmf_cfg80211_down(ndev); @@ -550,7 +554,7 @@ static int brcmf_netdev_open(struct net_device *ndev) u32 toe_ol; s32 ret = 0; - brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); /* If bus is not ready, can't continue */ if (bus_if->state != BRCMF_BUS_DATA) { @@ -602,7 +606,8 @@ int brcmf_net_attach(struct brcmf_if *ifp) struct brcmf_pub *drvr = ifp->drvr; struct net_device *ndev; - brcmf_dbg(TRACE, "ifidx %d mac %pM\n", ifp->idx, ifp->mac_addr); + brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->idx, + ifp->mac_addr); ndev = ifp->ndev; /* set appropriate operations */ @@ -641,7 +646,7 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, struct net_device *ndev; int i; - brcmf_dbg(TRACE, "idx %d\n", ifidx); + brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", bssidx, ifidx); ifp = drvr->iflist[ifidx]; /* @@ -695,13 +700,12 @@ void brcmf_del_if(struct brcmf_pub *drvr, int ifidx) { struct brcmf_if *ifp; - brcmf_dbg(TRACE, "idx %d\n", ifidx); - ifp = drvr->iflist[ifidx]; if (!ifp) { - brcmf_err("Null interface\n"); + brcmf_err("Null interface, idx=%d\n", ifidx); return; } + brcmf_dbg(TRACE, "Enter, idx=%d, bssidx=%d\n", ifidx, ifp->bssidx); if (ifp->ndev) { if (ifidx == 0) { if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { -- cgit v0.10.2 From 7ee296027871c15aee7e1e48c372f854a837cd36 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:43 +0100 Subject: brcmfmac: Cleanup function brcmf_notifiy_connect_status_ap. Clean up function, removing some unnecessary code and initialisation. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 0f170cb..544257a5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3994,38 +3994,32 @@ brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, const struct brcmf_event_msg *e, void *data) { - s32 err = 0; + static int generation; u32 event = e->event_code; u32 reason = e->reason; - u32 len = e->datalen; - static int generation; - struct station_info sinfo; brcmf_dbg(CONN, "event %d, reason %d\n", event, reason); - memset(&sinfo, 0, sizeof(sinfo)); - sinfo.filled = 0; if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) && - reason == BRCMF_E_STATUS_SUCCESS) { + (reason == BRCMF_E_STATUS_SUCCESS)) { + memset(&sinfo, 0, sizeof(sinfo)); sinfo.filled = STATION_INFO_ASSOC_REQ_IES; if (!data) { brcmf_err("No IEs present in ASSOC/REASSOC_IND"); return -EINVAL; } sinfo.assoc_req_ies = data; - sinfo.assoc_req_ies_len = len; + sinfo.assoc_req_ies_len = e->datalen; generation++; sinfo.generation = generation; - cfg80211_new_sta(ndev, e->addr, &sinfo, GFP_ATOMIC); + cfg80211_new_sta(ndev, e->addr, &sinfo, GFP_KERNEL); } else if ((event == BRCMF_E_DISASSOC_IND) || (event == BRCMF_E_DEAUTH_IND) || (event == BRCMF_E_DEAUTH)) { - generation++; - sinfo.generation = generation; - cfg80211_del_sta(ndev, e->addr, GFP_ATOMIC); + cfg80211_del_sta(ndev, e->addr, GFP_KERNEL); } - return err; + return 0; } static s32 -- cgit v0.10.2 From 1701261d070e2077867fd08efe7b5977e3a130f9 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:44 +0100 Subject: brcmfmac: Use single function for channel to chanspec. Simplify code by using single function for converting channel to chanspec. No need to set 40MHz flags, as they are not needed for correct working in FW. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 544257a5..153924e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -393,16 +393,9 @@ static u16 channel_to_chanspec(struct ieee80211_channel *ch) else chanspec |= WL_CHANSPEC_BAND_5G; - if (ch->flags & IEEE80211_CHAN_NO_HT40) { - chanspec |= WL_CHANSPEC_BW_20; - chanspec |= WL_CHANSPEC_CTL_SB_NONE; - } else { - chanspec |= WL_CHANSPEC_BW_40; - if (ch->flags & IEEE80211_CHAN_NO_HT40PLUS) - chanspec |= WL_CHANSPEC_CTL_SB_LOWER; - else - chanspec |= WL_CHANSPEC_CTL_SB_UPPER; - } + chanspec |= WL_CHANSPEC_BW_20; + chanspec |= WL_CHANSPEC_CTL_SB_NONE; + return chanspec; } @@ -933,31 +926,6 @@ static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof) memset(prof, 0, sizeof(*prof)); } -static void brcmf_ch_to_chanspec(int ch, struct brcmf_join_params *join_params, - size_t *join_params_size) -{ - u16 chanspec = 0; - - if (ch != 0) { - if (ch <= CH_MAX_2G_CHANNEL) - chanspec |= WL_CHANSPEC_BAND_2G; - else - chanspec |= WL_CHANSPEC_BAND_5G; - - chanspec |= WL_CHANSPEC_BW_20; - chanspec |= WL_CHANSPEC_CTL_SB_NONE; - - *join_params_size += BRCMF_ASSOC_PARAMS_FIXED_SIZE + - sizeof(u16); - - chanspec |= (ch & WL_CHANSPEC_CHAN_MASK); - join_params->params_le.chanspec_list[0] = cpu_to_le16(chanspec); - join_params->params_le.chanspec_num = cpu_to_le32(1); - - brcmf_dbg(CONN, "channel %d, chanspec %#X\n", ch, chanspec); - } -} - static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) { s32 err = 0; @@ -988,6 +956,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev, s32 err = 0; s32 wsec = 0; s32 bcnprd; + u16 chanspec; brcmf_dbg(TRACE, "Enter\n"); if (!check_vif_up(ifp->vif)) @@ -1091,8 +1060,11 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev, params->chandef.chan->center_freq); if (params->channel_fixed) { /* adding chanspec */ - brcmf_ch_to_chanspec(cfg->channel, - &join_params, &join_params_size); + chanspec = channel_to_chanspec(params->chandef.chan); + join_params.params_le.chanspec_list[0] = + cpu_to_le16(chanspec); + join_params.params_le.chanspec_num = cpu_to_le32(1); + join_params_size += sizeof(join_params.params_le); } /* set channel for starter */ @@ -1404,6 +1376,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_join_params join_params; size_t join_params_size; struct brcmf_ssid ssid; + u16 chanspec; s32 err = 0; @@ -1421,10 +1394,13 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, if (chan) { cfg->channel = ieee80211_frequency_to_channel(chan->center_freq); - brcmf_dbg(CONN, "channel (%d), center_req (%d)\n", - cfg->channel, chan->center_freq); - } else + chanspec = channel_to_chanspec(chan); + brcmf_dbg(CONN, "channel=%d, center_req=%d, chanspec=0x%04x\n", + cfg->channel, chan->center_freq, chanspec); + } else { cfg->channel = 0; + chanspec = 0; + } brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len); @@ -1473,8 +1449,11 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(CONN, "ssid \"%s\", len (%d)\n", ssid.SSID, ssid.SSID_len); - brcmf_ch_to_chanspec(cfg->channel, - &join_params, &join_params_size); + if (cfg->channel) { + join_params.params_le.chanspec_list[0] = cpu_to_le16(chanspec); + join_params.params_le.chanspec_num = cpu_to_le32(1); + join_params_size += sizeof(join_params.params_le); + } err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, &join_params, join_params_size); if (err) -- cgit v0.10.2 From 75d907d3ee835f8759fe291023aa609dccebe504 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 6 Feb 2013 18:40:45 +0100 Subject: brcmfmac: add chip information to the bus interface Extend the bus interface with chip identifier and revision. This will be used when certain devices need special handling in the driver. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 6af7c9d..ad25c34 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -64,6 +64,8 @@ struct brcmf_bus_ops { * @dstats: dongle-based statistical data. * @align: alignment requirement for the bus. * @dcmd_list: bus/device specific dongle initialization commands. + * @chip: device identifier of the dongle chip. + * @chiprev: revision of the dongle chip. */ struct brcmf_bus { union { @@ -76,6 +78,8 @@ struct brcmf_bus { uint maxctl; unsigned long tx_realloc; u8 align; + u32 chip; + u32 chiprev; struct list_head dcmd_list; struct brcmf_bus_ops *ops; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index d424dd6..04680c5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -3927,6 +3927,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) /* Assign bus interface call back */ bus->sdiodev->bus_if->dev = bus->sdiodev->dev; bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops; + bus->sdiodev->bus_if->chip = bus->ci->chip; + bus->sdiodev->bus_if->chiprev = bus->ci->chiprev; /* Attach to the brcmf/OS/network interface */ ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 06f7339..a55994d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1250,6 +1250,8 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) bus->bus_priv.usb = bus_pub; dev_set_drvdata(dev, bus); bus->ops = &brcmf_usb_bus_ops; + bus->chip = bus_pub->devid; + bus->chiprev = bus_pub->chiprev; /* Attach to the common driver interface */ ret = brcmf_attach(0, dev); -- cgit v0.10.2 From 371830eafeb742e973964b38a55f17b69ea714d0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 6 Feb 2013 18:40:46 +0100 Subject: brcmfmac: add function to retrieve chip information Added function to obtain chip information for chip specific code. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index f0e81a8..e17f68a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -552,5 +552,6 @@ extern int brcmf_net_attach(struct brcmf_if *ifp); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, char *name, u8 *mac_addr); extern void brcmf_del_if(struct brcmf_pub *drvr, int ifidx); +extern u32 brcmf_get_chip_info(struct brcmf_if *ifp); #endif /* _BRCMF_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index a09c077..6202ad2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -895,6 +895,16 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev) return !err; } +/* + * return chip id and rev of the device encoded in u32. + */ +u32 brcmf_get_chip_info(struct brcmf_if *ifp) +{ + struct brcmf_bus *bus = ifp->drvr->bus_if; + + return bus->chip << 4 | bus->chiprev; +} + static void brcmf_driver_init(struct work_struct *work) { brcmf_debugfs_init(); -- cgit v0.10.2 From cbb1ec9491fdbd3aa9dee6ad9a3bcb05bdfd279d Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 6 Feb 2013 18:40:47 +0100 Subject: brcmfmac: fix problem connecting to AP without security The bcm43236 device showed having an issue connection to an AP without security when auth_type was set to automatic. For this particular device a workaround is made by selecting open-system. This problem does not occur when using wpa_supplicant as it will not use auth type automatic. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 153924e..d47b274 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1365,9 +1365,28 @@ brcmf_set_sharedkey(struct net_device *ndev, return err; } +static +enum nl80211_auth_type brcmf_war_auth_type(struct brcmf_if *ifp, + enum nl80211_auth_type type) +{ + u32 ci; + if (type == NL80211_AUTHTYPE_AUTOMATIC) { + /* shift to ignore chip revision */ + ci = brcmf_get_chip_info(ifp) >> 4; + switch (ci) { + case 43236: + brcmf_dbg(CONN, "43236 WAR: use OPEN instead of AUTO\n"); + return NL80211_AUTHTYPE_OPEN_SYSTEM; + default: + break; + } + } + return type; +} + static s32 brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, - struct cfg80211_connect_params *sme) + struct cfg80211_connect_params *sme) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); @@ -1410,6 +1429,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, goto done; } + sme->auth_type = brcmf_war_auth_type(ifp, sme->auth_type); err = brcmf_set_auth_type(ndev, sme); if (err) { brcmf_err("wl_set_auth_type failed (%d)\n", err); -- cgit v0.10.2 From 957f4aca5fa0db69635271bc4621cc0b65b2d590 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 6 Feb 2013 12:54:17 -0600 Subject: rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_id When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi BUGS with a NULL pointer dereference because the per-driver configuration data is not available. The probe function has been restructured as suggested by Ben Hutchings . Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index d9e659f..577c0dc 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -363,9 +363,15 @@ static struct usb_device_id rtl8192c_usb_ids[] = { MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids); +static int rtl8192cu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return rtl_usb_probe(intf, id, &rtl92cu_hal_cfg); +} + static struct usb_driver rtl8192cu_driver = { .name = "rtl8192cu", - .probe = rtl_usb_probe, + .probe = rtl8192cu_probe, .disconnect = rtl_usb_disconnect, .id_table = rtl8192c_usb_ids, diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index af5423c..80730c7 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -937,7 +937,8 @@ static struct rtl_intf_ops rtl_usb_ops = { }; int rtl_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) + const struct usb_device_id *id, + struct rtl_hal_cfg *rtl_hal_cfg) { int err; struct ieee80211_hw *hw = NULL; @@ -972,7 +973,7 @@ int rtl_usb_probe(struct usb_interface *intf, usb_set_intfdata(intf, hw); /* init cfg & intf_ops */ rtlpriv->rtlhal.interface = INTF_USB; - rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_info); + rtlpriv->cfg = rtl_hal_cfg; rtlpriv->intf_ops = &rtl_usb_ops; rtl_dbgp_flag_init(hw); /* Init IO handler */ diff --git a/drivers/net/wireless/rtlwifi/usb.h b/drivers/net/wireless/rtlwifi/usb.h index 5235136..fb986f9 100644 --- a/drivers/net/wireless/rtlwifi/usb.h +++ b/drivers/net/wireless/rtlwifi/usb.h @@ -157,7 +157,8 @@ struct rtl_usb_priv { int rtl_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id); + const struct usb_device_id *id, + struct rtl_hal_cfg *rtl92cu_hal_cfg); void rtl_usb_disconnect(struct usb_interface *intf); int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message); int rtl_usb_resume(struct usb_interface *pusb_intf); -- cgit v0.10.2 From c5e534e569fd07991d4d09921c73823cd5e4115e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 7 Feb 2013 14:44:40 +0100 Subject: NET: ath5k, check ath5k_eeprom_mode_from_channel retval It can, if invalid argument given, return a negative value. In that case we would access arrays out-of-bounds and such. Check the value and yell loudly if that happened as it would be a bug in the implementation. (Instead of silently corrupting memory.) Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: "Luis R. Rodriguez" Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index ab363f3..a78afa9 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1613,6 +1613,10 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah) ah->ah_cal_mask |= AR5K_CALIBRATION_NF; ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel); + if (WARN_ON(ee_mode < 0)) { + ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF; + return; + } /* completed NF calibration, test threshold */ nf = ath5k_hw_read_measured_noise_floor(ah); diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 4084b10..e2d8b2c 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -985,6 +985,8 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, return; ee_mode = ath5k_eeprom_mode_from_channel(channel); + if (WARN_ON(ee_mode < 0)) + return; /* Adjust power delta for channel 14 */ if (channel->center_freq == 2484) -- cgit v0.10.2 From 708eb54f20334470ad92042547db0fef0cd60462 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 7 Feb 2013 12:35:35 -0700 Subject: brcmsmac: fix u16 overflow warning DOT11_MIN_BEACON_PERIOD and DOT11_MAX_BEACON_PERIOD are superfluous. The only invalid beacon period is 0. Comparing a 16 bit quantity to 0xffff also causes a compile warning: drivers/net/wireless/brcm80211/brcmsmac/main.c:5560 brcms_c_set_beacon_period() warn: impossible condition '(period > 65535) => (0-65535 > 65535)' Observed from smatch analysis. Cc: Brett Rudley Cc: Arend van Spriel Cc: "Franky (Zhenhui) Lin" Cc: Hante Meuleman Cc: "John W. Linville" Cc: Pieter-Paul Giesberts Cc: Seth Forshee Cc: Hauke Mehrtens Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner Acked-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index c26992a..080b54d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -101,8 +101,6 @@ #define DOT11_RTS_LEN 16 #define DOT11_CTS_LEN 10 #define DOT11_BA_BITMAP_LEN 128 -#define DOT11_MIN_BEACON_PERIOD 1 -#define DOT11_MAX_BEACON_PERIOD 0xFFFF #define DOT11_MAXNUMFRAGS 16 #define DOT11_MAX_FRAG_LEN 2346 @@ -5555,8 +5553,7 @@ int brcms_c_set_rateset(struct brcms_c_info *wlc, struct brcm_rateset *rs) int brcms_c_set_beacon_period(struct brcms_c_info *wlc, u16 period) { - if (period < DOT11_MIN_BEACON_PERIOD || - period > DOT11_MAX_BEACON_PERIOD) + if (period == 0) return -EINVAL; wlc->default_bss->beacon_period = period; -- cgit v0.10.2 From 0d61c9177cb9bf48dcec9c3d9205a309085d4318 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 7 Feb 2013 13:28:09 -0700 Subject: brcmsmac: avoid 512 byte stack variable Dynamically allocate the probe response template which avoids potential stack corruption. Observed with smatch: drivers/net/wireless/brcm80211/brcmsmac/main.c:7412 brcms_c_bss_update_probe_resp() warn: 'prb_resp' puts 512 bytes on stack Cc: Brett Rudley Cc: Arend van Spriel Cc: "Franky (Zhenhui) Lin" Cc: Hante Meuleman Cc: "John W. Linville" Cc: Seth Forshee Cc: Pieter-Paul Giesberts Cc: Hauke Mehrtens Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner Acked-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 080b54d..0985925 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7405,9 +7405,13 @@ brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg, bool suspend) { - u16 prb_resp[BCN_TMPL_LEN / 2]; + u16 *prb_resp; int len = BCN_TMPL_LEN; + prb_resp = kmalloc(BCN_TMPL_LEN, GFP_ATOMIC); + if (!prb_resp) + return; + /* * write the probe response to hardware, or save in * the config structure @@ -7441,6 +7445,8 @@ brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc, if (suspend) brcms_c_enable_mac(wlc); + + kfree(prb_resp); } void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend) -- cgit v0.10.2 From 4fe238b73240a10faf9689e4c37852492e16db52 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 7 Feb 2013 12:37:47 -0800 Subject: mwl8k: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 51634f2..8186af4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1149,7 +1149,6 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rxq->buf = kcalloc(MWL8K_RX_DESCS, sizeof(*rxq->buf), GFP_KERNEL); if (rxq->buf == NULL) { - wiphy_err(hw->wiphy, "failed to alloc RX skbuff list\n"); pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma); return -ENOMEM; } @@ -1442,7 +1441,6 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index) txq->skb = kcalloc(MWL8K_TX_DESCS, sizeof(*txq->skb), GFP_KERNEL); if (txq->skb == NULL) { - wiphy_err(hw->wiphy, "failed to alloc TX skbuff list\n"); pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma); return -ENOMEM; } -- cgit v0.10.2 From 2880b86859967af710c72f7d34fb421a86a71e22 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 12:06:31 +0100 Subject: brcmfmac: use brcmf_if::bssidx as index in interface list Upon receiving an IF event from the firmware the interface was created and stored on a list using the interface index. With upcoming P2P feature the firmware will send a IF event in which two interfaces have the same interface index. To uniquely locate them on the list the bss index is now used. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index e17f68a..7c78131 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -512,7 +512,7 @@ struct brcmf_cfg80211_vif; * @vif: points to cfg80211 specific interface information. * @ndev: associated network device. * @stats: interface specific network statistics. - * @idx: interface index in device firmware. + * @ifidx: interface index in device firmware. * @bssidx: index of bss associated with this interface. * @mac_addr: assigned mac address. * @pend_8021x_cnt: tracks outstanding number of 802.1x frames. @@ -525,7 +525,7 @@ struct brcmf_if { struct net_device_stats stats; struct work_struct setmacaddr_work; struct work_struct multicast_work; - int idx; + int ifidx; s32 bssidx; u8 mac_addr[ETH_ALEN]; atomic_t pend_8021x_cnt; @@ -549,9 +549,9 @@ extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, struct sk_buff *rxp); extern int brcmf_net_attach(struct brcmf_if *ifp); -extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, - s32 bssidx, char *name, u8 *mac_addr); -extern void brcmf_del_if(struct brcmf_pub *drvr, int ifidx); +extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, + s32 ifidx, char *name, u8 *mac_addr); +extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx); extern u32 brcmf_get_chip_info(struct brcmf_if *ifp); #endif /* _BRCMF_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index bb454cd..a2354d9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -303,6 +303,14 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, brcmf_err("rx data ifnum out of range (%d)\n", *ifidx); return -EBADE; } + /* The ifidx is the idx to map to matching netdev/ifp. When receiving + * events this is easy because it contains the bssidx which maps + * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. + * bssidx 1 is used for p2p0 and no data can be received or + * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 + */ + if (*ifidx) + (*ifidx)++; if (((h->flags & BDC_FLAG_VER_MASK) >> BDC_FLAG_VER_SHIFT) != BDC_PROTO_VER) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 6202ad2..db03d30 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -72,7 +72,7 @@ static void _brcmf_set_multicast_list(struct work_struct *work) ifp = container_of(work, struct brcmf_if, multicast_work); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); ndev = ifp->ndev; @@ -132,7 +132,7 @@ _brcmf_set_mac_address(struct work_struct *work) ifp = container_of(work, struct brcmf_if, setmacaddr_work); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr, ETH_ALEN); @@ -170,7 +170,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, struct brcmf_pub *drvr = ifp->drvr; struct ethhdr *eh; - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); /* Can the device send data? */ if (drvr->bus_if->state != BRCMF_BUS_DATA) { @@ -181,8 +181,8 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, goto done; } - if (!drvr->iflist[ifp->idx]) { - brcmf_err("bad ifidx %d\n", ifp->idx); + if (!drvr->iflist[ifp->bssidx]) { + brcmf_err("bad ifidx %d\n", ifp->bssidx); netif_stop_queue(ndev); dev_kfree_skb(skb); ret = -ENODEV; @@ -194,14 +194,14 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, struct sk_buff *skb2; brcmf_dbg(INFO, "%s: insufficient headroom\n", - brcmf_ifname(drvr, ifp->idx)); + brcmf_ifname(drvr, ifp->bssidx)); drvr->bus_if->tx_realloc++; skb2 = skb_realloc_headroom(skb, drvr->hdrlen); dev_kfree_skb(skb); skb = skb2; if (skb == NULL) { brcmf_err("%s: skb_realloc_headroom failed\n", - brcmf_ifname(drvr, ifp->idx)); + brcmf_ifname(drvr, ifp->bssidx)); ret = -ENOMEM; goto done; } @@ -222,7 +222,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, atomic_inc(&ifp->pend_8021x_cnt); /* If the protocol uses a data header, apply it */ - brcmf_proto_hdrpush(drvr, ifp->idx, skb); + brcmf_proto_hdrpush(drvr, ifp->ifidx, skb); /* Use bus module to send data frame */ ret = brcmf_bus_txdata(drvr->bus_if, skb); @@ -372,7 +372,7 @@ static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); return &ifp->stats; } @@ -424,7 +424,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) u32 toe_cmpnt, csum_dir; int ret; - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); /* all ethtool calls start with a cmd word */ if (copy_from_user(&cmd, uaddr, sizeof(u32))) @@ -521,9 +521,9 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; - brcmf_dbg(TRACE, "Enter, bssidx=%d, cmd=0x%04x\n", ifp->idx, cmd); + brcmf_dbg(TRACE, "Enter, idx=%d, cmd=0x%04x\n", ifp->bssidx, cmd); - if (!drvr->iflist[ifp->idx]) + if (!drvr->iflist[ifp->bssidx]) return -1; if (cmd == SIOCETHTOOL) @@ -536,7 +536,7 @@ static int brcmf_netdev_stop(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); brcmf_cfg80211_down(ndev); @@ -554,7 +554,7 @@ static int brcmf_netdev_open(struct net_device *ndev) u32 toe_ol; s32 ret = 0; - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); /* If bus is not ready, can't continue */ if (bus_if->state != BRCMF_BUS_DATA) { @@ -606,12 +606,12 @@ int brcmf_net_attach(struct brcmf_if *ifp) struct brcmf_pub *drvr = ifp->drvr; struct net_device *ndev; - brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->idx, + brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, ifp->mac_addr); ndev = ifp->ndev; /* set appropriate operations */ - if (!ifp->idx) + if (!ifp->bssidx) ndev->netdev_ops = &brcmf_netdev_ops_pri; else ndev->netdev_ops = &brcmf_netdev_ops_virt; @@ -639,16 +639,15 @@ fail: return -EBADE; } -struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, - char *name, u8 *addr_mask) +struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, + char *name, u8 *mac_addr) { struct brcmf_if *ifp; struct net_device *ndev; - int i; - brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", bssidx, ifidx); + brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifidx); - ifp = drvr->iflist[ifidx]; + ifp = drvr->iflist[bssidx]; /* * Delete the existing interface before overwriting it * in case we missed the BRCMF_E_IF_DEL event. @@ -656,11 +655,11 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, if (ifp) { brcmf_err("ERROR: netdev:%s already exists\n", ifp->ndev->name); - if (ifidx) { + if (bssidx) { netif_stop_queue(ifp->ndev); unregister_netdev(ifp->ndev); free_netdev(ifp->ndev); - drvr->iflist[ifidx] = NULL; + drvr->iflist[bssidx] = NULL; } else { brcmf_err("ignore IF event\n"); return ERR_PTR(-EINVAL); @@ -677,8 +676,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, ifp = netdev_priv(ndev); ifp->ndev = ndev; ifp->drvr = drvr; - drvr->iflist[ifidx] = ifp; - ifp->idx = ifidx; + drvr->iflist[bssidx] = ifp; + ifp->ifidx = ifidx; ifp->bssidx = bssidx; INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); @@ -686,9 +685,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, init_waitqueue_head(&ifp->pend_8021x_wait); - if (addr_mask != NULL) - for (i = 0; i < ETH_ALEN; i++) - ifp->mac_addr[i] = drvr->mac[i] ^ addr_mask[i]; + if (mac_addr != NULL) + memcpy(ifp->mac_addr, mac_addr, ETH_ALEN); brcmf_dbg(TRACE, " ==== pid:%x, if:%s (%pM) created ===\n", current->pid, ifp->ndev->name, ifp->mac_addr); @@ -696,18 +694,18 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, return ifp; } -void brcmf_del_if(struct brcmf_pub *drvr, int ifidx) +void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) { struct brcmf_if *ifp; - ifp = drvr->iflist[ifidx]; + ifp = drvr->iflist[bssidx]; if (!ifp) { - brcmf_err("Null interface, idx=%d\n", ifidx); + brcmf_err("Null interface, idx=%d\n", bssidx); return; } - brcmf_dbg(TRACE, "Enter, idx=%d, bssidx=%d\n", ifidx, ifp->bssidx); + brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx); if (ifp->ndev) { - if (ifidx == 0) { + if (bssidx == 0) { if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { rtnl_lock(); brcmf_netdev_stop(ifp->ndev); @@ -721,8 +719,8 @@ void brcmf_del_if(struct brcmf_pub *drvr, int ifidx) cancel_work_sync(&ifp->multicast_work); unregister_netdev(ifp->ndev); - drvr->iflist[ifidx] = NULL; - if (ifidx == 0) + drvr->iflist[bssidx] = NULL; + if (bssidx == 0) brcmf_cfg80211_detach(drvr->config); free_netdev(ifp->ndev); } @@ -815,7 +813,7 @@ fail: brcmf_err("failed: %d\n", ret); if (drvr->config) brcmf_cfg80211_detach(drvr->config); - free_netdev(drvr->iflist[0]->ndev); + free_netdev(ifp->ndev); drvr->iflist[0] = NULL; return ret; } @@ -849,7 +847,7 @@ void brcmf_dev_reset(struct device *dev) void brcmf_detach(struct device *dev) { - int i; + s32 i; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index ba0b225..1fd29b0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -189,12 +189,12 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; } - ifp = drvr->iflist[ifevent->ifidx]; + ifp = drvr->iflist[ifevent->bssidx]; if (ifevent->action == BRCMF_E_IF_ADD) { brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname, emsg->addr); - ifp = brcmf_add_if(drvr, ifevent->ifidx, ifevent->bssidx, + ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx, emsg->ifname, emsg->addr); if (IS_ERR(ifp)) return; @@ -206,7 +206,7 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); if (ifevent->action == BRCMF_E_IF_DEL) - brcmf_del_if(drvr, ifevent->ifidx); + brcmf_del_if(drvr, ifevent->bssidx); } /** @@ -250,8 +250,6 @@ static void brcmf_fweh_event_worker(struct work_struct *work) drvr = container_of(fweh, struct brcmf_pub, fweh); while ((event = brcmf_fweh_dequeue_event(fweh))) { - ifp = drvr->iflist[event->ifidx]; - brcmf_dbg(EVENT, "event %s (%u) ifidx %u bsscfg %u addr %pM\n", brcmf_fweh_event_name(event->code), event->code, event->emsg.ifidx, event->emsg.bsscfgidx, @@ -283,6 +281,7 @@ static void brcmf_fweh_event_worker(struct work_struct *work) goto event_free; } + ifp = drvr->iflist[emsg.bsscfgidx]; err = brcmf_fweh_call_event_handler(ifp, event->code, &emsg, event->data); if (err) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c index f6ffcf6..8d1def9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c @@ -45,9 +45,10 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp, u32 cmd, void *data, u32 len, bool set) if (data != NULL) len = min_t(uint, len, BRCMF_DCMD_MAXLEN); if (set) - err = brcmf_proto_cdc_set_dcmd(drvr, ifp->idx, cmd, data, len); + err = brcmf_proto_cdc_set_dcmd(drvr, ifp->ifidx, cmd, data, + len); else - err = brcmf_proto_cdc_query_dcmd(drvr, ifp->idx, cmd, data, + err = brcmf_proto_cdc_query_dcmd(drvr, ifp->ifidx, cmd, data, len); if (err >= 0) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d47b274..d78f946 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3546,6 +3546,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, if (err < 0) { brcmf_err("BRCMF_C_UP error (%d)\n", err); goto exit; + brcmf_fil_iovar_int_set(ifp, "apsta", 0); } memset(&join_params, 0, sizeof(join_params)); @@ -4242,6 +4243,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, cfg80211_attach_out: brcmf_free_vif(vif); + wiphy_free(wiphy); return NULL; } -- cgit v0.10.2 From 643ecaab355c3879215cb34c10ae88d729e408be Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 12:06:32 +0100 Subject: brcmfmac: Check null pointer on brcmf_dev_reset. When unloading it is possible that drvr is not null, but iflist[0] is. So check iflist[0] pointer before using it. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index db03d30..f90db57 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -842,7 +842,8 @@ void brcmf_dev_reset(struct device *dev) if (drvr == NULL) return; - brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); + if (drvr->iflist[0]) + brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); } void brcmf_detach(struct device *dev) -- cgit v0.10.2 From b55de97ffd920e2bb1104eca272688f1be7329c2 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Fri, 8 Feb 2013 12:06:33 +0100 Subject: brcmfmac: fix mmc host locking issue fix wrong locking in crash info processing Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 04680c5..9a1f823 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2701,7 +2701,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, sdio_claim_host(bus->sdiodev->func[1]); rv = brcmf_sdbrcm_membytes(bus, false, shaddr, (u8 *)&addr_le, 4); - sdio_claim_host(bus->sdiodev->func[1]); + sdio_release_host(bus->sdiodev->func[1]); if (rv < 0) return rv; -- cgit v0.10.2 From bd16e3555fb61a6f3792c6efec5b63697e051e42 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Fri, 8 Feb 2013 12:06:34 +0100 Subject: brcmfmac: turn clocks on when reading shared info Make sure backplane clocks are on while reading crash data. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 9a1f823..97764b4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2699,6 +2699,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, * address of sdpcm_shared structure */ sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); rv = brcmf_sdbrcm_membytes(bus, false, shaddr, (u8 *)&addr_le, 4); sdio_release_host(bus->sdiodev->func[1]); -- cgit v0.10.2 From 0bc9a8cb24f9a1fa556c081cd9d9edc89121a636 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Fri, 8 Feb 2013 12:06:35 +0100 Subject: brcmfmac: remove unnecessary locking in trap info processing Locking host access in trap info processing is not needed as bus access functions do it on their own. Reviewed-by: Arend Van Spriel Reviewed-by: Hante Meuleman Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 97764b4..3581763 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2721,10 +2721,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, } /* Read hndrte_shared structure */ - sdio_claim_host(bus->sdiodev->func[1]); rv = brcmf_sdbrcm_membytes(bus, false, addr, (u8 *)&sh_le, sizeof(struct sdpcm_shared_le)); - sdio_release_host(bus->sdiodev->func[1]); if (rv < 0) return rv; @@ -2826,14 +2824,12 @@ static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh, if ((sh->flags & SDPCM_SHARED_TRAP) == 0) return 0; - sdio_claim_host(bus->sdiodev->func[1]); error = brcmf_sdbrcm_membytes(bus, false, sh->trap_addr, (u8 *)&tr, sizeof(struct brcmf_trap_info)); if (error < 0) return error; nbytes = brcmf_sdio_dump_console(bus, sh, data, count); - sdio_release_host(bus->sdiodev->func[1]); if (nbytes < 0) return nbytes; -- cgit v0.10.2 From 9f440b7bc786883c117be9c0f438a27b356f64b4 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:36 +0100 Subject: brcmfmac: add peer-to-peer group discovery support First part for P2P support. It is a variation on the existing scanning functionality and is used to discover peer-to-peer group owners and/or peer-to-peer devices in listen state. Tested with wpa_cli/wpa_supplicant v2.0-devel. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile index 1a6661a..756e19f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile @@ -26,6 +26,7 @@ brcmfmac-objs += \ wl_cfg80211.o \ fwil.o \ fweh.o \ + p2p.o \ dhd_cdc.o \ dhd_common.o \ dhd_linux.o @@ -37,4 +38,4 @@ brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \ brcmfmac-$(CONFIG_BRCMFMAC_USB) += \ usb.o brcmfmac-$(CONFIG_BRCMDBG) += \ - dhd_dbg.o \ No newline at end of file + dhd_dbg.o diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index f90db57..b469bd1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -26,6 +26,7 @@ #include "dhd_bus.h" #include "dhd_proto.h" #include "dhd_dbg.h" +#include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c new file mode 100644 index 0000000..22d9de8 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -0,0 +1,734 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include "fwil.h" +#include "p2p.h" +#include "wl_cfg80211.h" + +/* parameters used for p2p escan */ +#define P2PAPI_SCAN_NPROBES 1 +#define P2PAPI_SCAN_DWELL_TIME_MS 80 +#define P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS 40 +#define P2PAPI_SCAN_HOME_TIME_MS 60 +#define P2PAPI_SCAN_NPROBS_TIME_MS 30 +#define P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS 100 +#define WL_SCAN_CONNECT_DWELL_TIME_MS 200 +#define WL_SCAN_JOIN_PROBE_INTERVAL_MS 20 + +#define BRCMF_P2P_WILDCARD_SSID "DIRECT-" +#define BRCMF_P2P_WILDCARD_SSID_LEN (sizeof(BRCMF_P2P_WILDCARD_SSID) - 1) + +#define SOCIAL_CHAN_1 1 +#define SOCIAL_CHAN_2 6 +#define SOCIAL_CHAN_3 11 +#define SOCIAL_CHAN_CNT 3 +#define AF_PEER_SEARCH_CNT 2 + +/** + * struct brcmf_p2p_disc_st_le - set discovery state in firmware. + * + * @state: requested discovery state (see enum brcmf_p2p_disc_state). + * @chspec: channel parameter for %WL_P2P_DISC_ST_LISTEN state. + * @dwell: dwell time in ms for %WL_P2P_DISC_ST_LISTEN state. + */ +struct brcmf_p2p_disc_st_le { + u8 state; + __le16 chspec; + __le16 dwell; +}; + +/** + * enum brcmf_p2p_disc_state - P2P discovery state values + * + * @WL_P2P_DISC_ST_SCAN: P2P discovery with wildcard SSID and P2P IE. + * @WL_P2P_DISC_ST_LISTEN: P2P discovery off-channel for specified time. + * @WL_P2P_DISC_ST_SEARCH: P2P discovery with P2P wildcard SSID and P2P IE. + */ +enum brcmf_p2p_disc_state { + WL_P2P_DISC_ST_SCAN, + WL_P2P_DISC_ST_LISTEN, + WL_P2P_DISC_ST_SEARCH +}; + +/** + * struct brcmf_p2p_scan_le - P2P specific scan request. + * + * @type: type of scan method requested (values: 'E' or 'S'). + * @reserved: reserved (ignored). + * @eparams: parameters used for type 'E'. + * @sparams: parameters used for type 'S'. + */ +struct brcmf_p2p_scan_le { + u8 type; + u8 reserved[3]; + union { + struct brcmf_escan_params_le eparams; + struct brcmf_scan_params_le sparams; + }; +}; + +static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p) +{ + return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; +} + +/** + * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. + * + * @p2p: P2P specific data. + */ +static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + u8 null_eth_addr[] = { 0, 0, 0, 0, 0, 0 }; + s32 ret = 0; + + brcmf_fil_iovar_int_set(netdev_priv(ndev), "apsta", 1); + + /* In case of COB type, firmware has default mac address + * After Initializing firmware, we have to set current mac address to + * firmware for P2P device address + */ + ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "p2p_da_override", + null_eth_addr, sizeof(null_eth_addr)); + if (ret) + brcmf_err("failed to update device address ret %d\n", ret); + + return ret; +} + +/** + * brcmf_p2p_generate_bss_mac() - derive mac addresses for P2P. + * + * @p2p: P2P specific data. + * + * P2P needs mac addresses for P2P device and interface. These are + * derived from the primary net device, ie. the permanent ethernet + * address of the device. + */ +static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + + /* Generate the P2P Device Address. This consists of the device's + * primary MAC address with the locally administered bit set. + */ + memcpy(p2p->dev_addr, ndev->dev_addr, ETH_ALEN); + p2p->dev_addr[0] |= 0x02; + + /* Generate the P2P Interface Address. If the discovery and connection + * BSSCFGs need to simultaneously co-exist, then this address must be + * different from the P2P Device Address, but also locally administered. + */ + memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN); + p2p->int_addr[4] ^= 0x80; +} + +/** + * brcmf_p2p_scan_is_p2p_request() - is cfg80211 scan request a P2P scan. + * + * @request: the scan request as received from cfg80211. + * + * returns true if one of the ssids in the request matches the + * P2P wildcard ssid; otherwise returns false. + */ +static bool brcmf_p2p_scan_is_p2p_request(struct cfg80211_scan_request *request) +{ + struct cfg80211_ssid *ssids = request->ssids; + int i; + + for (i = 0; i < request->n_ssids; i++) { + if (ssids[i].ssid_len != BRCMF_P2P_WILDCARD_SSID_LEN) + continue; + + brcmf_dbg(INFO, "comparing ssid \"%s\"", ssids[i].ssid); + if (!memcmp(BRCMF_P2P_WILDCARD_SSID, ssids[i].ssid, + BRCMF_P2P_WILDCARD_SSID_LEN)) + return true; + } + return false; +} + +/** + * brcmf_p2p_set_discover_state - set discover state in firmware. + * + * @ifp: low-level interface object. + * @state: discover state to set. + * @chanspec: channel parameters (for state @WL_P2P_DISC_ST_LISTEN only). + * @listen_ms: duration to listen (for state @WL_P2P_DISC_ST_LISTEN only). + */ +static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, + u16 chanspec, u16 listen_ms) +{ + struct brcmf_p2p_disc_st_le discover_state; + s32 ret = 0; + brcmf_dbg(TRACE, "enter\n"); + + discover_state.state = state; + discover_state.chspec = cpu_to_le16(chanspec); + discover_state.dwell = cpu_to_le16(listen_ms); + ret = brcmf_fil_bsscfg_data_set(ifp, "p2p_state", &discover_state, + sizeof(discover_state)); + return ret; +} + +/** + * brcmf_p2p_discover_disable_search() - reset discover state. + * + * @p2p: P2P specific data. + * + * Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success. + */ +static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p) +{ + struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + struct brcmf_p2p_disc_st_le discovery_mode; + int ret; + + /* + * vif presence indicates discovery is initialized. + */ + if (!vif) + return -ENODEV; + + ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state", + &discovery_mode, + sizeof(discovery_mode)); + if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN) + ret = brcmf_p2p_set_discover_state(vif->ifp, + WL_P2P_DISC_ST_SCAN, 0, 0); + return ret; +} + +/** + * brcmf_p2p_init_discovery() - enable discovery in the firmware. + * + * @p2p: P2P specific data. + * + * Configures the firmware to allow P2P peer discovery. Creates the + * virtual interface and consequently the P2P device for it. + */ +static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + struct p2p_bss *bss_dev; + s32 index; + s32 ret; + + brcmf_dbg(TRACE, "enter\n"); + + bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; + if (bss_dev->vif != NULL) { + brcmf_dbg(INFO, "do nothing, already initialized\n"); + return 0; + } + + /* Enable P2P Discovery in the firmware */ + ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 1); + if (ret < 0) { + brcmf_err("set discover error\n"); + return ret; + } + + /* obtain bsscfg index for P2P discovery */ + ret = brcmf_fil_iovar_int_get(netdev_priv(ndev), "p2p_dev", &index); + if (ret < 0) { + brcmf_err("retrieving discover bsscfg index failed\n"); + return ret; + } + + /* + * need brcmf_if for setting the discovery state. + */ + ifp = kzalloc(sizeof(*vif->ifp), GFP_KERNEL); + if (!ifp) { + brcmf_err("could not create discovery if\n"); + return -ENOMEM; + } + + /* set required fields */ + ifp->drvr = p2p->cfg->pub; + ifp->ifidx = 0; + ifp->bssidx = index; + + /* Set the initial discovery state to SCAN */ + ret = brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + + if (ret != 0) { + brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); + (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); + kfree(ifp); + return ret; + } + + /* create a vif for it */ + vif = brcmf_alloc_vif(p2p->cfg, NULL, NL80211_IFTYPE_P2P_DEVICE, false); + if (IS_ERR(vif)) { + brcmf_err("could not create discovery vif\n"); + kfree(ifp); + return PTR_ERR(vif); + } + + vif->ifp = ifp; + ifp->vif = vif; + bss_dev->vif = vif; + + return 0; +} + +/** + * brcmf_p2p_deinit_discovery() - disable P2P device discovery. + * + * @p2p: P2P specific data. + * + * Resets the discovery state and disables it in firmware. The virtual + * interface and P2P device are freed. + */ +static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + struct brcmf_if *ifp; + struct p2p_bss *bss_dev; + brcmf_dbg(TRACE, "enter\n"); + + bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; + if (bss_dev->vif == NULL) { + brcmf_err("do nothing, not initialized\n"); + return -EINVAL; + } + + ifp = bss_dev->vif->ifp; + + /* Set the discovery state to SCAN */ + (void)brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + + /* Disable P2P discovery in the firmware */ + (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); + + /* remove discovery interface */ + brcmf_free_vif(bss_dev->vif); + bss_dev->vif = NULL; + kfree(ifp); + + return 0; +} + +/** + * brcmf_p2p_enable_discovery() - initialize and configure discovery. + * + * @p2p: P2P specific data. + * @ie: buffer containing information elements. + * @ie_len: length of @ie buffer. + * + * Initializes the discovery device and configure the virtual interface. + */ +static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, + const u8 *ie, u32 ie_len) +{ + struct brcmf_cfg80211_vif *vif; + s32 ret = 0; + + brcmf_dbg(TRACE, "enter\n"); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif) { + brcmf_dbg(INFO, + "DISCOVERY init already done, just process IE\n"); + goto set_ie; + } + + ret = brcmf_p2p_init_discovery(p2p); + if (ret < 0) { + brcmf_err("init discovery error %d\n", ret); + goto exit; + } + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + + /* + * Set wsec to any non-zero value in the discovery bsscfg + * to ensure our P2P probe responses have the privacy bit + * set in the 802.11 WPA IE. Some peer devices may not + * initiate WPS with us if this bit is not set. + */ + ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED); + if (ret < 0) + brcmf_err("wsec error %d\n", ret); + +set_ie: + if (ie_len) { + ret = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, + ie, ie_len); + + if (ret < 0) { + brcmf_err("set probreq ie occurs error %d\n", ret); + goto exit; + } + } +exit: + return ret; +} + +/* + * brcmf_p2p_escan() - initiate a P2P scan. + * + * @p2p: P2P specific data. + * @num_chans: number of channels to scan. + * @chanspecs: channel parameters for @num_chans channels. + * @search_state: P2P discover state to use. + * @action: scan action to pass to firmware. + * @bss_type: type of P2P bss. + */ +static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, + u16 chanspecs[], s32 search_state, u16 action, + enum p2p_bss_type bss_type) +{ + s32 ret = 0; + s32 memsize = offsetof(struct brcmf_p2p_scan_le, + eparams.params_le.channel_list); + s32 nprobes; + s32 active; + u32 i; + u8 *memblk; + struct brcmf_cfg80211_vif *vif; + struct brcmf_p2p_scan_le *p2p_params; + struct brcmf_scan_params_le *sparams; + struct brcmf_ssid ssid; + + /* add padding if uneven */ + if (num_chans % 2) + memsize += sizeof(__le16); + memsize += num_chans * sizeof(__le16); + memblk = kzalloc(memsize, GFP_KERNEL); + if (!memblk) + return -ENOMEM; + + vif = p2p->bss_idx[bss_type].vif; + if (vif == NULL) { + brcmf_err("no vif for bss type %d\n", bss_type); + ret = -EINVAL; + goto exit; + } + + switch (search_state) { + case WL_P2P_DISC_ST_SEARCH: + /* + * If we in SEARCH STATE, we don't need to set SSID explictly + * because dongle use P2P WILDCARD internally by default + */ + /* use null ssid */ + ssid.SSID_len = 0; + memset(ssid.SSID, 0, sizeof(ssid.SSID)); + break; + case WL_P2P_DISC_ST_SCAN: + /* + * wpa_supplicant has p2p_find command with type social or + * progressive. For progressive, we need to set the ssid to + * P2P WILDCARD because we just do broadcast scan unless + * setting SSID. + */ + ssid.SSID_len = BRCMF_P2P_WILDCARD_SSID_LEN; + memcpy(ssid.SSID, BRCMF_P2P_WILDCARD_SSID, ssid.SSID_len); + break; + default: + brcmf_err(" invalid search state %d\n", search_state); + ret = -EINVAL; + goto exit; + } + + brcmf_p2p_set_discover_state(vif->ifp, search_state, 0, 0); + + /* + * set p2p scan parameters. + */ + p2p_params = (struct brcmf_p2p_scan_le *)memblk; + p2p_params->type = 'E'; + + /* determine the scan engine parameters */ + sparams = &p2p_params->eparams.params_le; + sparams->bss_type = DOT11_BSSTYPE_ANY; + if (p2p->cfg->active_scan) + sparams->scan_type = 0; + else + sparams->scan_type = 1; + + memset(&sparams->bssid, 0xFF, ETH_ALEN); + if (ssid.SSID_len) + memcpy(sparams->ssid_le.SSID, ssid.SSID, ssid.SSID_len); + sparams->ssid_le.SSID_len = cpu_to_le32(ssid.SSID_len); + sparams->home_time = cpu_to_le32(P2PAPI_SCAN_HOME_TIME_MS); + + /* + * SOCIAL_CHAN_CNT + 1 takes care of the Progressive scan + * supported by the supplicant. + */ + if (num_chans == SOCIAL_CHAN_CNT || num_chans == (SOCIAL_CHAN_CNT + 1)) + active = P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS; + else if (num_chans == AF_PEER_SEARCH_CNT) + active = P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS; + else if (wl_get_vif_state_all(p2p->cfg, BRCMF_VIF_STATUS_CONNECTED)) + active = -1; + else + active = P2PAPI_SCAN_DWELL_TIME_MS; + + /* Override scan params to find a peer for a connection */ + if (num_chans == 1) { + active = WL_SCAN_CONNECT_DWELL_TIME_MS; + /* XXX WAR to sync with presence period of VSDB GO. + * send probe request more frequently + */ + nprobes = active / WL_SCAN_JOIN_PROBE_INTERVAL_MS; + } else { + nprobes = active / P2PAPI_SCAN_NPROBS_TIME_MS; + } + + if (nprobes <= 0) + nprobes = 1; + + brcmf_dbg(INFO, "nprobes # %d, active_time %d\n", nprobes, active); + sparams->active_time = cpu_to_le32(active); + sparams->nprobes = cpu_to_le32(nprobes); + sparams->passive_time = cpu_to_le32(-1); + sparams->channel_num = cpu_to_le32(num_chans & + BRCMF_SCAN_PARAMS_COUNT_MASK); + for (i = 0; i < num_chans; i++) + sparams->channel_list[i] = cpu_to_le16(chanspecs[i]); + + /* set the escan specific parameters */ + p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION); + p2p_params->eparams.action = cpu_to_le16(action); + p2p_params->eparams.sync_id = cpu_to_le16(0x1234); + /* perform p2p scan on primary device */ + ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize); + if (!ret) + set_bit(BRCMF_SCAN_STATUS_BUSY, &p2p->cfg->scan_status); +exit: + kfree(memblk); + return ret; +} + +/** + * brcmf_p2p_run_escan() - escan callback for peer-to-peer. + * + * @cfg: driver private data for cfg80211 interface. + * @ndev: net device for which scan is requested. + * @request: scan request from cfg80211. + * @action: scan action. + * + * Determines the P2P discovery state based to scan request parameters and + * validates the channels in the request. + */ +static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct cfg80211_scan_request *request, + u16 action) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + s32 err = 0; + s32 search_state = WL_P2P_DISC_ST_SCAN; + struct brcmf_cfg80211_vif *vif; + struct net_device *dev = NULL; + int i, num_nodfs = 0; + u16 *chanspecs; + + brcmf_dbg(TRACE, "enter\n"); + + if (!request) { + err = -EINVAL; + goto exit; + } + + if (request->n_channels) { + chanspecs = kcalloc(request->n_channels, sizeof(*chanspecs), + GFP_KERNEL); + if (!chanspecs) { + err = -ENOMEM; + goto exit; + } + vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; + if (vif) + dev = vif->wdev.netdev; + if (request->n_channels == 3 && + request->channels[0]->hw_value == SOCIAL_CHAN_1 && + request->channels[1]->hw_value == SOCIAL_CHAN_2 && + request->channels[2]->hw_value == SOCIAL_CHAN_3) { + /* SOCIAL CHANNELS 1, 6, 11 */ + search_state = WL_P2P_DISC_ST_SEARCH; + brcmf_dbg(INFO, "P2P SEARCH PHASE START\n"); + } else if (dev != NULL && vif->mode == WL_MODE_AP) { + /* If you are already a GO, then do SEARCH only */ + brcmf_dbg(INFO, "Already a GO. Do SEARCH Only\n"); + search_state = WL_P2P_DISC_ST_SEARCH; + } else { + brcmf_dbg(INFO, "P2P SCAN STATE START\n"); + } + + /* + * no P2P scanning on passive or DFS channels. + */ + for (i = 0; i < request->n_channels; i++) { + struct ieee80211_channel *chan = request->channels[i]; + + if (chan->flags & (IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_PASSIVE_SCAN)) + continue; + + chanspecs[i] = channel_to_chanspec(chan); + brcmf_dbg(INFO, "%d: chan=%d, channel spec=%x\n", + num_nodfs, chan->hw_value, chanspecs[i]); + num_nodfs++; + } + err = brcmf_p2p_escan(p2p, num_nodfs, chanspecs, search_state, + action, P2PAPI_BSSCFG_DEVICE); + } +exit: + if (err) + brcmf_err("error (%d)\n", err); + return err; +} + +/** + * brcmf_p2p_scan_prep() - prepare scan based on request. + * + * @wiphy: wiphy device. + * @request: scan request from cfg80211. + * + * Prepare the scan appropriately for type of scan requested. Overrides the + * escan .run() callback for peer-to-peer scanning. + */ +int brcmf_p2p_scan_prep(struct wiphy *wiphy, + struct cfg80211_scan_request *request) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_p2p_info *p2p = &cfg->p2p; + int err = 0; + + if (brcmf_p2p_scan_is_p2p_request(request)) { + /* find my listen channel */ + err = cfg80211_get_p2p_attr(request->ie, request->ie_len, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + &p2p->listen_channel, 1); + if (err < 0) + return err; + + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); + + err = brcmf_p2p_enable_discovery(p2p, request->ie, + request->ie_len); + + /* + * override .run_escan() callback. + */ + cfg->escan_info.run = brcmf_p2p_run_escan; + } else { + /* + * legacy scan trigger + * So, we have to disable p2p discovery if p2p discovery is on + */ + (void)brcmf_p2p_discover_disable_search(p2p); + + /* + * clear p2p vendor ies for probe request set by + * previous p2p related scan(s). + */ + if (p2p_discover_vif(p2p)) + err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p), + BRCMF_VNDR_IE_PRBREQ_FLAG, + request->ie, + request->ie_len); + } + return err; +} + +/** + * brcmf_p2p_attach() - attach for P2P. + * + * @cfg: driver private data for cfg80211 interface. + */ +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) +{ + struct brcmf_p2p_info *p2p; + + p2p = &cfg->p2p; + + p2p->cfg = cfg; + brcmf_p2p_set_firmware(p2p); + brcmf_p2p_generate_bss_mac(p2p); +} + +/** + * brcmf_p2p_detach() - detach P2P. + * + * @p2p: P2P specific data. + */ +void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) +{ + brcmf_p2p_deinit_discovery(p2p); + /* just set it all to zero */ + memset(p2p, 0, sizeof(*p2p)); +} + +/** + * brcmf_p2p_add_vif() - create a new P2P virtual interface. + * + * @wiphy: wiphy device of new interface. + * @name: name of the new interface. + * @type: nl80211 interface type. + * @flags: TBD + * @params: TBD + * + * TODO: not yet supported. + */ +struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + brcmf_err("enter - not supported yet\n"); + brcmf_dbg(INFO, "adding vif \"%s\" (type=%d)\n", name, type); + return ERR_PTR(-EOPNOTSUPP); +} + +/** + * brcmf_p2p_del_vif() - delete a P2P virtual interface. + * + * @wiphy: wiphy device of interface. + * @wdev: wireless device of interface. + * + * TODO: not yet supported. + */ +int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) +{ + struct brcmf_cfg80211_vif *vif; + + vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); + if (wdev->netdev) + brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); + else + brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n", + wdev->identifier); + brcmf_err("enter - not supported yet\n"); + return -EOPNOTSUPP; +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h new file mode 100644 index 0000000..f304adf --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef WL_CFGP2P_H_ +#define WL_CFGP2P_H_ + +#include + +struct brcmf_cfg80211_info; + +/* vendor ies max buffer length for probe response or beacon */ +#define VNDR_IES_MAX_BUF_LEN 1400 +/* normal vendor ies buffer length */ +#define VNDR_IES_BUF_LEN 512 + +/* Structure to hold all saved P2P and WPS IEs for a BSSCFG */ +/** + * enum p2p_bss_type - different type of BSS configurations. + * + * @P2PAPI_BSSCFG_PRIMARY: maps to driver's primary bsscfg. + * @P2PAPI_BSSCFG_DEVICE: maps to driver's P2P device discovery bsscfg. + * @P2PAPI_BSSCFG_CONNECTION: maps to driver's P2P connection bsscfg. + * @P2PAPI_BSSCFG_MAX: used for range checking. + */ +enum p2p_bss_type { + P2PAPI_BSSCFG_PRIMARY, /* maps to driver's primary bsscfg */ + P2PAPI_BSSCFG_DEVICE, /* maps to driver's P2P device discovery bsscfg */ + P2PAPI_BSSCFG_CONNECTION, /* maps to driver's P2P connection bsscfg */ + P2PAPI_BSSCFG_MAX +}; + +/** + * struct p2p_bss - peer-to-peer bss related information. + * + * @vif: virtual interface of this P2P bss. + * @private_data: TBD + */ +struct p2p_bss { + struct brcmf_cfg80211_vif *vif; + void *private_data; +}; + +/** + * enum brcmf_p2p_status - P2P specific dongle status. + * + * @BRCMF_P2P_STATUS_IF_ADD: peer-to-peer vif add sent to dongle. + * @BRCMF_P2P_STATUS_IF_DEL: NOT-USED? + * @BRCMF_P2P_STATUS_IF_DELETING: peer-to-peer vif delete sent to dongle. + * @BRCMF_P2P_STATUS_IF_CHANGING: peer-to-peer vif change sent to dongle. + * @BRCMF_P2P_STATUS_IF_CHANGED: peer-to-peer vif change completed on dongle. + * @BRCMF_P2P_STATUS_LISTEN_EXPIRED: listen duration expired. + * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed. + * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. + * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. + */ +enum brcmf_p2p_status { + BRCMF_P2P_STATUS_IF_ADD = 0, + BRCMF_P2P_STATUS_IF_DEL, + BRCMF_P2P_STATUS_IF_DELETING, + BRCMF_P2P_STATUS_IF_CHANGING, + BRCMF_P2P_STATUS_IF_CHANGED, + BRCMF_P2P_STATUS_LISTEN_EXPIRED, + BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, + BRCMF_P2P_STATUS_ACTION_TX_NOACK, + BRCMF_P2P_STATUS_GO_NEG_PHASE +}; + +/** + * struct brcmf_p2p_info - p2p specific driver information. + * + * @cfg: driver private data for cfg80211 interface. + * @status: status of P2P (see enum brcmf_p2p_status). + * @dev_addr: P2P device address. + * @int_addr: P2P interface address. + * @bss_idx: informate for P2P bss types. + * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state. + * @ssid: ssid for P2P GO. + * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. + */ +struct brcmf_p2p_info { + struct brcmf_cfg80211_info *cfg; + unsigned long status; + u8 dev_addr[ETH_ALEN]; + u8 int_addr[ETH_ALEN]; + struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX]; + struct timer_list listen_timer; + struct brcmf_ssid ssid; + u8 listen_channel; +}; + +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); +void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); +struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params); +int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); +int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); +void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); +int brcmf_p2p_scan_prep(struct wiphy *wiphy, + struct cfg80211_scan_request *request); + +#endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d78f946..5c4d1fc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -26,6 +26,7 @@ #include #include "dhd.h" #include "dhd_dbg.h" +#include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" @@ -41,12 +42,8 @@ #define BRCMF_PNO_SCAN_COMPLETE 1 #define BRCMF_PNO_SCAN_INCOMPLETE 0 -#define BRCMF_IFACE_MAX_CNT 2 +#define BRCMF_IFACE_MAX_CNT 3 -#define TLV_LEN_OFF 1 /* length offset */ -#define TLV_HDR_LEN 2 /* header length */ -#define TLV_BODY_OFF 2 /* body offset */ -#define TLV_OUI_LEN 3 /* oui id length */ #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */ #define WPA_OUI_TYPE 1 #define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */ @@ -76,9 +73,7 @@ #define VNDR_IE_PKTFLAG_OFFSET 8 #define VNDR_IE_VSIE_OFFSET 12 #define VNDR_IE_HDR_SIZE 12 -#define VNDR_IE_BEACON_FLAG 0x1 -#define VNDR_IE_PRBRSP_FLAG 0x2 -#define MAX_VNDR_IE_NUMBER 5 +#define VNDR_IE_PARSE_LIMIT 5 #define DOT11_MGMT_HDR_LEN 24 /* d11 management header len */ #define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */ @@ -271,13 +266,6 @@ static const u32 __wl_cipher_suites[] = { WLAN_CIPHER_SUITE_AES_CMAC, }; -/* tag_ID/length/value_buffer tuple */ -struct brcmf_tlv { - u8 id; - u8 len; - u8 data[1]; -}; - /* Vendor specific ie. id = 221, oui and type defines exact ie */ struct brcmf_vs_tlv { u8 id; @@ -294,7 +282,7 @@ struct parsed_vndr_ie_info { struct parsed_vndr_ies { u32 count; - struct parsed_vndr_ie_info ie_info[MAX_VNDR_IE_NUMBER]; + struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT]; }; /* Quarter dBm units to mW @@ -381,7 +369,7 @@ static u8 brcmf_mw_to_qdbm(u16 mw) return qdbm; } -static u16 channel_to_chanspec(struct ieee80211_channel *ch) +u16 channel_to_chanspec(struct ieee80211_channel *ch) { u16 chanspec; @@ -431,6 +419,55 @@ send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key) return err; } +static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, + const char *name, + enum nl80211_iftype type, + u32 *flags, + struct vif_params *params) +{ + brcmf_dbg(TRACE, "enter: %s type %d\n", name, type); + switch (type) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return ERR_PTR(-EOPNOTSUPP); + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + return brcmf_p2p_add_vif(wiphy, name, type, flags, params); + case NL80211_IFTYPE_UNSPECIFIED: + case NL80211_IFTYPE_P2P_DEVICE: + default: + return ERR_PTR(-EINVAL); + } +} + +static +int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) +{ + switch (wdev->iftype) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return -EOPNOTSUPP; + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + return brcmf_p2p_del_vif(wiphy, wdev); + case NL80211_IFTYPE_UNSPECIFIED: + case NL80211_IFTYPE_P2P_DEVICE: + default: + return -EINVAL; + } + return -EOPNOTSUPP; +} + static s32 brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, enum nl80211_iftype type, u32 *flags, @@ -696,11 +733,12 @@ brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy, s32 err; u32 passive_scan; struct brcmf_scan_results *results; + struct escan_info *escan = &cfg->escan_info; brcmf_dbg(SCAN, "Enter\n"); - cfg->escan_info.ndev = ndev; - cfg->escan_info.wiphy = wiphy; - cfg->escan_info.escan_state = WL_ESCAN_STATE_SCANNING; + escan->ndev = ndev; + escan->wiphy = wiphy; + escan->escan_state = WL_ESCAN_STATE_SCANNING; passive_scan = cfg->active_scan ? 0 : 1; err = brcmf_fil_cmd_int_set(netdev_priv(ndev), BRCMF_C_SET_PASSIVE_SCAN, passive_scan); @@ -714,7 +752,7 @@ brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy, results->count = 0; results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE; - err = brcmf_run_escan(cfg, ndev, request, WL_ESCAN_ACTION_START); + err = escan->run(cfg, ndev, request, WL_ESCAN_ACTION_START); if (err) brcmf_set_mpc(ndev, 1); return err; @@ -769,6 +807,11 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, cfg->scan_request = request; set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); if (escan_req) { + cfg->escan_info.run = brcmf_run_escan; + err = brcmf_p2p_scan_prep(wiphy, request); + if (err) + goto scan_out; + err = brcmf_do_escan(cfg, wiphy, ndev, request); if (err) goto scan_out; @@ -2186,7 +2229,7 @@ static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) * triples, returning a pointer to the substring whose first element * matches tag */ -static struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) +struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) { struct brcmf_tlv *elt; int totlen; @@ -3227,7 +3270,7 @@ brcmf_parse_vndr_ies(const u8 *vndr_ie_buf, u32 vndr_ie_len, parsed_info->vndrie.oui[2], parsed_info->vndrie.oui_type); - if (vndr_ies->count >= MAX_VNDR_IE_NUMBER) + if (vndr_ies->count >= VNDR_IE_PARSE_LIMIT) break; next: remaining_len -= (ie->len + TLV_HDR_LEN); @@ -3261,7 +3304,6 @@ brcmf_vndr_ie(u8 *iebuf, s32 pktflag, u8 *ie_ptr, u32 ie_len, s8 *add_del_cmd) return ie_len + VNDR_IE_HDR_SIZE; } -static s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len) { @@ -3295,12 +3337,12 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, curr_ie_buf = iovar_ie_buf; if (ifp->vif->mode == WL_MODE_AP) { switch (pktflag) { - case VNDR_IE_PRBRSP_FLAG: + case BRCMF_VNDR_IE_PRBRSP_FLAG: mgmt_ie_buf = saved_ie->probe_res_ie; mgmt_ie_len = &saved_ie->probe_res_ie_len; mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); break; - case VNDR_IE_BEACON_FLAG: + case BRCMF_VNDR_IE_BEACON_FLAG: mgmt_ie_buf = saved_ie->beacon_ie; mgmt_ie_len = &saved_ie->beacon_ie_len; mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); @@ -3311,9 +3353,17 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, goto exit; } } else { - err = -EPERM; - brcmf_err("not suitable type\n"); - goto exit; + switch (pktflag) { + case BRCMF_VNDR_IE_PRBREQ_FLAG: + mgmt_ie_buf = saved_ie->probe_req_ie; + mgmt_ie_len = &saved_ie->probe_req_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); + break; + default: + err = -EPERM; + brcmf_err("not suitable type\n"); + goto exit; + } } if (vndr_ie_len > mgmt_ie_buf_len) { @@ -3508,7 +3558,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } /* Set Beacon IEs to FW */ err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - VNDR_IE_BEACON_FLAG, + BRCMF_VNDR_IE_BEACON_FLAG, settings->beacon.tail, settings->beacon.tail_len); if (err) @@ -3518,7 +3568,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, /* Set Probe Response IEs to FW */ err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - VNDR_IE_PRBRSP_FLAG, + BRCMF_VNDR_IE_PRBRSP_FLAG, settings->beacon.proberesp_ies, settings->beacon.proberesp_ies_len); if (err) @@ -3625,6 +3675,8 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, } static struct cfg80211_ops wl_cfg80211_ops = { + .add_virtual_intf = brcmf_cfg80211_add_iface, + .del_virtual_intf = brcmf_cfg80211_del_iface, .change_virtual_intf = brcmf_cfg80211_change_iface, .scan = brcmf_cfg80211_scan, .set_wiphy_params = brcmf_cfg80211_set_wiphy_params, @@ -3656,20 +3708,30 @@ static struct cfg80211_ops wl_cfg80211_ops = { #endif }; -static s32 brcmf_mode_to_nl80211_iftype(s32 mode) +static s32 brcmf_nl80211_iftype_to_mode(enum nl80211_iftype type) { - s32 err = 0; - - switch (mode) { - case WL_MODE_BSS: - return NL80211_IFTYPE_STATION; - case WL_MODE_IBSS: - return NL80211_IFTYPE_ADHOC; + switch (type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return -ENOTSUPP; + case NL80211_IFTYPE_ADHOC: + return WL_MODE_IBSS; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + return WL_MODE_BSS; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + return WL_MODE_AP; + case NL80211_IFTYPE_P2P_DEVICE: + return WL_MODE_P2P; + case NL80211_IFTYPE_UNSPECIFIED: default: - return NL80211_IFTYPE_UNSPECIFIED; + break; } - return err; + return -EINVAL; } static void brcmf_wiphy_pno_params(struct wiphy *wiphy) @@ -3681,6 +3743,28 @@ static void brcmf_wiphy_pno_params(struct wiphy *wiphy) wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; } +static const struct ieee80211_iface_limit brcmf_iface_limits[] = { + { + .max = 1, + .types = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP) + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_P2P_GO) + }, +}; +static const struct ieee80211_iface_combination brcmf_iface_combos[] = { + { + .max_interfaces = BRCMF_IFACE_MAX_CNT - 1, + .num_different_channels = 1, /* no multi-channel for now */ + .n_limits = ARRAY_SIZE(brcmf_iface_limits), + .limits = brcmf_iface_limits + } +}; + static struct wiphy *brcmf_setup_wiphy(struct device *phydev) { struct wiphy *wiphy; @@ -3693,10 +3777,15 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) } set_wiphy_dev(wiphy, phydev); wiphy->max_scan_ssids = WL_NUM_SCAN_MAX; + wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_AP); + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_P2P_GO); + wiphy->iface_combinations = brcmf_iface_combos; + wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz; wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a; /* Set * it as 11a by default. @@ -3722,23 +3811,25 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) return wiphy; } -static struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, struct net_device *netdev, - s32 mode, bool pm_block) + enum nl80211_iftype type, + bool pm_block) { struct brcmf_cfg80211_vif *vif; if (cfg->vif_cnt == BRCMF_IFACE_MAX_CNT) return ERR_PTR(-ENOSPC); + brcmf_dbg(TRACE, "allocating virtual interface (size=%d)\n", + sizeof(*vif)); vif = kzalloc(sizeof(*vif), GFP_KERNEL); if (!vif) return ERR_PTR(-ENOMEM); vif->wdev.wiphy = cfg->wiphy; vif->wdev.netdev = netdev; - vif->wdev.iftype = brcmf_mode_to_nl80211_iftype(mode); + vif->wdev.iftype = type; if (netdev) { vif->ifp = netdev_priv(netdev); @@ -3746,7 +3837,7 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, SET_NETDEV_DEV(netdev, wiphy_dev(cfg->wiphy)); } - vif->mode = mode; + vif->mode = brcmf_nl80211_iftype_to_mode(type); vif->pm_block = pm_block; vif->roam_off = -1; @@ -3757,7 +3848,7 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return vif; } -static void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) { struct brcmf_cfg80211_info *cfg; struct wiphy *wiphy; @@ -4226,7 +4317,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, cfg->pub = drvr; INIT_LIST_HEAD(&cfg->vif_list); - vif = brcmf_alloc_vif(cfg, ndev, WL_MODE_BSS, false); + vif = brcmf_alloc_vif(cfg, ndev, NL80211_IFTYPE_STATION, false); if (IS_ERR(vif)) { wiphy_free(wiphy); return NULL; @@ -4237,6 +4328,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_err("Failed to init iwm_priv (%d)\n", err); goto cfg80211_attach_out; } + brcmf_p2p_attach(cfg); ifp->vif = vif; return cfg; @@ -4482,3 +4574,14 @@ s32 brcmf_cfg80211_down(struct net_device *ndev) return err; } +u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state) +{ + struct brcmf_cfg80211_vif *vif; + bool result = 0; + + list_for_each_entry(vif, &cfg->vif_list, list) { + if (test_bit(state, &vif->sme_state)) + result++; + } + return result; +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index e4d9cc7..014a463 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -41,6 +41,38 @@ #define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ #define IE_MAX_LEN 512 +/* IE TLV processing */ +#define TLV_LEN_OFF 1 /* length offset */ +#define TLV_HDR_LEN 2 /* header length */ +#define TLV_BODY_OFF 2 /* body offset */ +#define TLV_OUI_LEN 3 /* oui id length */ + +/* 802.11 Mgmt Packet flags */ +#define BRCMF_VNDR_IE_BEACON_FLAG 0x1 +#define BRCMF_VNDR_IE_PRBRSP_FLAG 0x2 +#define BRCMF_VNDR_IE_ASSOCRSP_FLAG 0x4 +#define BRCMF_VNDR_IE_AUTHRSP_FLAG 0x8 +#define BRCMF_VNDR_IE_PRBREQ_FLAG 0x10 +#define BRCMF_VNDR_IE_ASSOCREQ_FLAG 0x20 +/* vendor IE in IW advertisement protocol ID field */ +#define BRCMF_VNDR_IE_IWAPID_FLAG 0x40 +/* allow custom IE id */ +#define BRCMF_VNDR_IE_CUSTOM_FLAG 0x100 + +/* P2P Action Frames flags (spec ordered) */ +#define BRCMF_VNDR_IE_GONREQ_FLAG 0x001000 +#define BRCMF_VNDR_IE_GONRSP_FLAG 0x002000 +#define BRCMF_VNDR_IE_GONCFM_FLAG 0x004000 +#define BRCMF_VNDR_IE_INVREQ_FLAG 0x008000 +#define BRCMF_VNDR_IE_INVRSP_FLAG 0x010000 +#define BRCMF_VNDR_IE_DISREQ_FLAG 0x020000 +#define BRCMF_VNDR_IE_DISRSP_FLAG 0x040000 +#define BRCMF_VNDR_IE_PRDREQ_FLAG 0x080000 +#define BRCMF_VNDR_IE_PRDRSP_FLAG 0x100000 + +#define BRCMF_VNDR_IE_P2PAF_SHIFT 12 + + /** * enum brcmf_scan_status - dongle scan status * @@ -52,11 +84,19 @@ enum brcmf_scan_status { BRCMF_SCAN_STATUS_ABORT, }; -/* wi-fi mode */ +/** + * enum wl_mode - driver mode of virtual interface. + * + * @WL_MODE_BSS: connects to BSS. + * @WL_MODE_IBSS: operate as ad-hoc. + * @WL_MODE_AP: operate as access-point. + * @WL_MODE_P2P: provide P2P discovery. + */ enum wl_mode { WL_MODE_BSS, WL_MODE_IBSS, - WL_MODE_AP + WL_MODE_AP, + WL_MODE_P2P }; /* dongle configuration */ @@ -122,14 +162,18 @@ enum brcmf_vif_status { /** * struct vif_saved_ie - holds saved IEs for a virtual interface. * + * @probe_req_ie: IE info for probe request. * @probe_res_ie: IE info for probe response. * @beacon_ie: IE info for beacon frame. + * @probe_req_ie_len: IE info length for probe request. * @probe_res_ie_len: IE info length for probe response. * @beacon_ie_len: IE info length for beacon frame. */ struct vif_saved_ie { + u8 probe_req_ie[VNDR_IES_BUF_LEN]; u8 probe_res_ie[IE_MAX_LEN]; u8 beacon_ie[IE_MAX_LEN]; + u32 probe_req_ie_len; u32 probe_res_ie_len; u32 beacon_ie_len; }; @@ -189,6 +233,9 @@ struct escan_info { u8 escan_buf[WL_ESCAN_BUF_SIZE]; struct wiphy *wiphy; struct net_device *ndev; + s32 (*run)(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct cfg80211_scan_request *request, u16 action); }; /** @@ -277,6 +324,7 @@ struct brcmf_pno_scanresults_le { * * @wiphy: wiphy object for cfg80211 interface. * @conf: dongle configuration. + * @p2p: peer-to-peer specific information. * @scan_request: cfg80211 scan request object. * @usr_sync: mainly for dongle up/down synchronization. * @bss_list: bss_list holding scanned ap information. @@ -308,6 +356,7 @@ struct brcmf_pno_scanresults_le { struct brcmf_cfg80211_info { struct wiphy *wiphy; struct brcmf_cfg80211_conf *conf; + struct brcmf_p2p_info p2p; struct cfg80211_scan_request *scan_request; struct mutex usr_sync; struct brcmf_scan_results *bss_list; @@ -337,6 +386,19 @@ struct brcmf_cfg80211_info { u8 vif_cnt; }; +/** + * struct brcmf_tlv - tag_ID/length/value_buffer tuple. + * + * @id: tag identifier. + * @len: number of bytes in value buffer. + * @data: value buffer. + */ +struct brcmf_tlv { + u8 id; + u8 len; + u8 data[1]; +}; + static inline struct wiphy *cfg_to_wiphy(struct brcmf_cfg80211_info *cfg) { return cfg->wiphy; @@ -389,4 +451,16 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg); s32 brcmf_cfg80211_up(struct net_device *ndev); s32 brcmf_cfg80211_down(struct net_device *ndev); +struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, + struct net_device *netdev, + enum nl80211_iftype type, + bool pm_block); +void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); + +s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, + const u8 *vndr_ie_buf, u32 vndr_ie_len); +struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); +u16 channel_to_chanspec(struct ieee80211_channel *ch); +u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); + #endif /* _wl_cfg80211_h_ */ -- cgit v0.10.2 From d3c0b63396442d564ceb4db0dcc51e70918b9c93 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:37 +0100 Subject: brcmfmac: add support for creating P2P client/GO interface This patch allow the creation of P2P client and group owner virtual interfaces in the driver. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 7c78131..b61254d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -72,6 +72,7 @@ #define BRCMF_C_SET_WSEC 134 #define BRCMF_C_GET_PHY_NOISE 135 #define BRCMF_C_GET_BSS_INFO 136 +#define BRCMF_C_SET_SCB_TIMEOUT 158 #define BRCMF_C_GET_PHYLIST 180 #define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 #define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h new file mode 100644 index 0000000..d21d9b2 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + + +#ifndef FWIL_TYPES_H_ +#define FWIL_TYPES_H_ + +#include + +enum brcmf_fil_p2p_if_types { + BRCMF_FIL_P2P_IF_CLIENT, + BRCMF_FIL_P2P_IF_GO, + BRCMF_FIL_P2P_IF_DYNBCN_GO, + BRCMF_FIL_P2P_IF_DEV, +}; + +struct brcmf_fil_p2p_if_le { + u8 addr[ETH_ALEN]; + enum brcmf_fil_p2p_if_types type; + __le16 chspec; +}; + +struct brcmf_fil_chan_info_le { + __le32 hw_channel; + __le32 target_channel; + __le32 scan_channel; +}; + +#endif /* FWIL_TYPES_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 22d9de8..25c6b7d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -23,6 +23,7 @@ #include #include #include "fwil.h" +#include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" @@ -45,6 +46,8 @@ #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 +#define BRCMF_SCB_TIMEOUT_VALUE 20 + /** * struct brcmf_p2p_disc_st_le - set discovery state in firmware. * @@ -285,7 +288,7 @@ static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p) } /* create a vif for it */ - vif = brcmf_alloc_vif(p2p->cfg, NULL, NL80211_IFTYPE_P2P_DEVICE, false); + vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE, false); if (IS_ERR(vif)) { brcmf_err("could not create discovery vif\n"); kfree(ifp); @@ -691,6 +694,43 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) memset(p2p, 0, sizeof(*p2p)); } +static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], + enum brcmf_fil_p2p_if_types iftype) +{ + struct brcmf_fil_p2p_if_le if_request; + struct brcmf_fil_chan_info_le ci; + u16 chanspec = 11 & WL_CHANSPEC_CHAN_MASK; + int err; + + /* we need a default channel */ + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); + if (!err) { + chanspec = le32_to_cpu(ci.hw_channel) & WL_CHANSPEC_CHAN_MASK; + if (chanspec < CH_MAX_2G_CHANNEL) + chanspec |= WL_CHANSPEC_BAND_2G; + else + chanspec |= WL_CHANSPEC_BAND_5G; + } + chanspec |= WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE; + + /* fill the firmware request */ + memcpy(if_request.addr, ea, ETH_ALEN); + if_request.type = iftype; + if_request.chspec = cpu_to_le16(chanspec); + + err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request, + sizeof(if_request)); + if (err) + return err; + + if (iftype == BRCMF_FIL_P2P_IF_GO) { + /* set station timeout for p2p */ + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, + BRCMF_SCB_TIMEOUT_VALUE); + } + return err; +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -699,16 +739,67 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) * @type: nl80211 interface type. * @flags: TBD * @params: TBD - * - * TODO: not yet supported. */ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { - brcmf_err("enter - not supported yet\n"); + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); + struct brcmf_cfg80211_vif *vif; + enum brcmf_fil_p2p_if_types iftype; + enum wl_mode mode; + int err; + + if (brcmf_cfg80211_vif_event_armed(cfg)) + return ERR_PTR(-EBUSY); + brcmf_dbg(INFO, "adding vif \"%s\" (type=%d)\n", name, type); - return ERR_PTR(-EOPNOTSUPP); + + switch (type) { + case NL80211_IFTYPE_P2P_CLIENT: + iftype = BRCMF_FIL_P2P_IF_CLIENT; + mode = WL_MODE_BSS; + break; + case NL80211_IFTYPE_P2P_GO: + iftype = BRCMF_FIL_P2P_IF_GO; + mode = WL_MODE_AP; + break; + default: + return ERR_PTR(-EOPNOTSUPP); + } + + vif = brcmf_alloc_vif(cfg, type, false); + brcmf_cfg80211_arm_vif_event(cfg, vif); + + err = brcmf_p2p_request_p2p_if(ifp, cfg->p2p.int_addr, iftype); + if (err) + goto fail; + + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, + msecs_to_jiffies(1500)); + brcmf_cfg80211_arm_vif_event(cfg, NULL); + if (!err) { + brcmf_err("timeout occurred\n"); + err = -EIO; + goto fail; + } + + /* interface created in firmware */ + ifp = vif->ifp; + if (!ifp) { + brcmf_err("no if pointer provided\n"); + err = -ENOENT; + } + + strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); + brcmf_cfg80211_vif_complete(cfg); + return &ifp->vif->wdev; + +fail: + brcmf_free_vif(vif); + return ERR_PTR(err); } /** @@ -721,9 +812,20 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, */ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_cfg80211_vif *vif; + int err; vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); + + if (brcmf_cfg80211_vif_event_armed(cfg)) + return -EBUSY; + + brcmf_cfg80211_arm_vif_event(cfg, vif); + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, + msecs_to_jiffies(1500)); + brcmf_cfg80211_arm_vif_event(cfg, NULL); if (wdev->netdev) brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); else diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 5c4d1fc..6b4e877 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3812,7 +3812,6 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) } struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, - struct net_device *netdev, enum nl80211_iftype type, bool pm_block) { @@ -3828,15 +3827,8 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return ERR_PTR(-ENOMEM); vif->wdev.wiphy = cfg->wiphy; - vif->wdev.netdev = netdev; vif->wdev.iftype = type; - if (netdev) { - vif->ifp = netdev_priv(netdev); - netdev->ieee80211_ptr = &vif->wdev; - SET_NETDEV_DEV(netdev, wiphy_dev(cfg->wiphy)); - } - vif->mode = brcmf_nl80211_iftype_to_mode(type); vif->pm_block = pm_block; vif->roam_off = -1; @@ -4195,6 +4187,57 @@ brcmf_notify_mic_status(struct brcmf_if *ifp, return 0; } +static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_if_event *ifevent = (struct brcmf_if_event *)data; + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + struct brcmf_cfg80211_vif *vif; + + brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfg %u\n", + ifevent->action, ifevent->flags, ifevent->ifidx, + ifevent->bssidx); + + + mutex_lock(&event->vif_event_lock); + event->action = ifevent->action; + vif = event->vif; + + switch (ifevent->action) { + case BRCMF_E_IF_ADD: + /* waiting process may have timed out */ + if (!cfg->vif_event.vif) + return -EBADF; + + ifp->vif = vif; + vif->ifp = ifp; + vif->wdev.netdev = ifp->ndev; + ifp->ndev->ieee80211_ptr = &vif->wdev; + SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); + mutex_unlock(&event->vif_event_lock); + wake_up(&event->vif_wq); + + /* waiting process need to set the netdev name */ + wait_for_completion(&event->vif_complete); + return brcmf_net_attach(ifp); + + case BRCMF_E_IF_DEL: + ifp->vif = NULL; + brcmf_free_vif(vif); + mutex_unlock(&event->vif_event_lock); + /* event may not be upon user request */ + if (brcmf_cfg80211_vif_event_armed(cfg)) + wake_up(&event->vif_wq); + return 0; + + default: + mutex_unlock(&event->vif_event_lock); + break; + } + return -EINVAL; +} + static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf) { conf->frag_threshold = (u32)-1; @@ -4226,6 +4269,8 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_notify_connect_status); brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND, brcmf_notify_sched_scan_results); + brcmf_fweh_register(cfg->pub, BRCMF_E_IF, + brcmf_notify_vif_event); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) @@ -4292,6 +4337,13 @@ static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) brcmf_deinit_priv_mem(cfg); } +static void init_vif_event(struct brcmf_cfg80211_vif_event *event) +{ + init_waitqueue_head(&event->vif_wq); + init_completion(&event->vif_complete); + mutex_init(&event->vif_event_lock); +} + struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, struct device *busdev) { @@ -4315,14 +4367,20 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, cfg = wiphy_priv(wiphy); cfg->wiphy = wiphy; cfg->pub = drvr; + init_vif_event(&cfg->vif_event); INIT_LIST_HEAD(&cfg->vif_list); - vif = brcmf_alloc_vif(cfg, ndev, NL80211_IFTYPE_STATION, false); + vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION, false); if (IS_ERR(vif)) { wiphy_free(wiphy); return NULL; } + vif->ifp = ifp; + vif->wdev.netdev = ndev; + ndev->ieee80211_ptr = &vif->wdev; + SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy)); + err = wl_init_priv(cfg); if (err) { brcmf_err("Failed to init iwm_priv (%d)\n", err); @@ -4585,3 +4643,50 @@ u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state) } return result; } + +static inline bool vif_event_equals(struct brcmf_cfg80211_vif_event *event, + u8 action) +{ + u8 evt_action; + + mutex_lock(&event->vif_event_lock); + evt_action = event->action; + mutex_unlock(&event->vif_event_lock); + return evt_action == action; +} + +void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + + mutex_lock(&event->vif_event_lock); + event->vif = vif; + event->action = 0; + mutex_unlock(&event->vif_event_lock); +} + +bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) +{ + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + bool armed; + + mutex_lock(&event->vif_event_lock); + armed = event->vif != NULL; + mutex_unlock(&event->vif_event_lock); + + return armed; +} +int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, + u8 action, ulong timeout) +{ + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + + return wait_event_timeout(event->vif_wq, + vif_event_equals(event, action), timeout); +} + +void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *cfg) +{ + complete(&cfg->vif_event.vif_complete); +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 014a463..691f613 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -320,6 +320,23 @@ struct brcmf_pno_scanresults_le { }; /** + * struct brcmf_cfg80211_vif_event - virtual interface event information. + * + * @vif_wq: waitqueue awaiting interface event from firmware. + * @vif_event_lock: protects other members in this structure. + * @vif_complete: completion for net attach. + * @action: either add, change, or delete. + * @vif: virtual interface object related to the event. + */ +struct brcmf_cfg80211_vif_event { + wait_queue_head_t vif_wq; + struct mutex vif_event_lock; + struct completion vif_complete; + u8 action; + struct brcmf_cfg80211_vif *vif; +}; + +/** * struct brcmf_cfg80211_info - dongle private data of cfg80211 interface * * @wiphy: wiphy object for cfg80211 interface. @@ -352,6 +369,7 @@ struct brcmf_pno_scanresults_le { * @escan_ioctl_buf: dongle command buffer for escan commands. * @vif_list: linked list of vif instances. * @vif_cnt: number of vif instances. + * @vif_event: vif event signalling. */ struct brcmf_cfg80211_info { struct wiphy *wiphy; @@ -384,6 +402,7 @@ struct brcmf_cfg80211_info { u8 *escan_ioctl_buf; struct list_head vif_list; u8 vif_cnt; + struct brcmf_cfg80211_vif_event vif_event; }; /** @@ -452,7 +471,6 @@ s32 brcmf_cfg80211_up(struct net_device *ndev); s32 brcmf_cfg80211_down(struct net_device *ndev); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, - struct net_device *netdev, enum nl80211_iftype type, bool pm_block); void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); @@ -462,5 +480,11 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); u16 channel_to_chanspec(struct ieee80211_channel *ch); u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); +void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); +bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); +int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, + u8 action, ulong timeout); +void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *info); #endif /* _wl_cfg80211_h_ */ -- cgit v0.10.2 From 0de8aace0ff499bf1b6597e7f272961d2e335933 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:38 +0100 Subject: brcmfmac: add support for P2P listen mode. With this patch a device can be put in p2p listen mode and becomes visible for other p2p devices (via p2p_find). Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index b61254d..82724d3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -452,6 +452,19 @@ struct brcmf_sta_info_le { __le32 rx_decrypt_failures; /* # of packet decrypted failed */ }; +/* + * WLC_E_PROBRESP_MSG + * WLC_E_P2P_PROBREQ_MSG + * WLC_E_ACTION_FRAME_RX + */ +struct brcmf_rx_mgmt_data { + __be16 version; + __be16 chanspec; + __be32 rssi; + __be32 mactime; + __be32 rate; +}; + /* Bus independent dongle command */ struct brcmf_dcmd { uint cmd; /* common dongle cmd definition */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h index 36901f7..8c39b51 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h @@ -83,6 +83,7 @@ struct brcmf_event; BRCMF_ENUM_DEF(MULTICAST_DECODE_ERROR, 51) \ BRCMF_ENUM_DEF(TRACE, 52) \ BRCMF_ENUM_DEF(IF, 54) \ + BRCMF_ENUM_DEF(P2P_DISC_LISTEN_COMPLETE, 55) \ BRCMF_ENUM_DEF(RSSI, 56) \ BRCMF_ENUM_DEF(PFN_SCAN_COMPLETE, 57) \ BRCMF_ENUM_DEF(EXTLOG_MSG, 58) \ @@ -96,8 +97,11 @@ struct brcmf_event; BRCMF_ENUM_DEF(DFS_AP_RESUME, 66) \ BRCMF_ENUM_DEF(ESCAN_RESULT, 69) \ BRCMF_ENUM_DEF(ACTION_FRAME_OFF_CHAN_COMPLETE, 70) \ + BRCMF_ENUM_DEF(PROBERESP_MSG, 71) \ + BRCMF_ENUM_DEF(P2P_PROBEREQ_MSG, 72) \ BRCMF_ENUM_DEF(DCS_REQUEST, 73) \ - BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) + BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \ + BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) #define BRCMF_ENUM_DEF(id, val) \ BRCMF_E_##id = (val), diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 25c6b7d..ecc96f3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -318,11 +318,6 @@ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) brcmf_dbg(TRACE, "enter\n"); bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; - if (bss_dev->vif == NULL) { - brcmf_err("do nothing, not initialized\n"); - return -EINVAL; - } - ifp = bss_dev->vif->ifp; /* Set the discovery state to SCAN */ @@ -348,8 +343,7 @@ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) * * Initializes the discovery device and configure the virtual interface. */ -static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, - const u8 *ie, u32 ie_len) +static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) { struct brcmf_cfg80211_vif *vif; s32 ret = 0; @@ -357,9 +351,8 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, brcmf_dbg(TRACE, "enter\n"); vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; if (vif) { - brcmf_dbg(INFO, - "DISCOVERY init already done, just process IE\n"); - goto set_ie; + brcmf_dbg(INFO, "DISCOVERY init already done\n"); + goto exit; } ret = brcmf_p2p_init_discovery(p2p); @@ -380,20 +373,36 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, if (ret < 0) brcmf_err("wsec error %d\n", ret); -set_ie: - if (ie_len) { - ret = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, - ie, ie_len); - - if (ret < 0) { - brcmf_err("set probreq ie occurs error %d\n", ret); - goto exit; - } - } exit: return ret; } +/** + * brcmf_p2p_configure_probereq() - Configure probe request data. + * + * @p2p: P2P specific data. + * @ie: buffer containing information elements. + * @ie_len: length of @ie buffer. + * + */ +static int brcmf_p2p_configure_probereq(struct brcmf_p2p_info *p2p, + const u8 *ie, u32 ie_len) +{ + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + + brcmf_dbg(TRACE, "enter\n"); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, + ie, ie_len); + + if (err < 0) + brcmf_err("set probreq ie occurs error %d\n", err); + + return err; +} + /* * brcmf_p2p_escan() - initiate a P2P scan. * @@ -420,9 +429,6 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, struct brcmf_scan_params_le *sparams; struct brcmf_ssid ssid; - /* add padding if uneven */ - if (num_chans % 2) - memsize += sizeof(__le16); memsize += num_chans * sizeof(__le16); memblk = kzalloc(memsize, GFP_KERNEL); if (!memblk) @@ -639,8 +645,10 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); - err = brcmf_p2p_enable_discovery(p2p, request->ie, - request->ie_len); + err = brcmf_p2p_enable_discovery(p2p); + if (err == 0) + err = brcmf_p2p_configure_probereq(p2p, request->ie, + request->ie_len); /* * override .run_escan() callback. @@ -666,6 +674,92 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, return err; } + +/** + * brcmf_p2p_remain_on_channel() - put device on channel and stay there. + * + * @wiphy: wiphy device. + * @channel: channel to stay on. + * @duration: time in ms to remain on channel. + * + */ +int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, + struct ieee80211_channel *channel, + unsigned int duration, u64 *cookie) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_cfg80211_vif *vif; + s32 err; + u16 chanspec; + + brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", + ieee80211_frequency_to_channel(channel->center_freq), + duration); + + *cookie = 0; + err = brcmf_p2p_enable_discovery(p2p); + if (err) + goto exit; + + chanspec = channel_to_chanspec(channel); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, + chanspec, (u16)duration); + if (err) + goto exit; + + memcpy(&p2p->remain_on_channel, channel, + sizeof(p2p->remain_on_channel)); + + set_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, &p2p->status); + +exit: + cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); + return err; +} + + +/** + * brcmf_p2p_notify_listen_complete() - p2p listen has completed. + * + * @ifp: interfac control. + * @e: event message. Not used, to make it usable for fweh event dispatcher. + * @data: payload of message. Not used. + * + */ +int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + + brcmf_dbg(TRACE, "Enter\n"); + if (test_and_clear_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, + &p2p->status)) + cfg80211_remain_on_channel_expired(&ifp->vif->wdev, 0, + &p2p->remain_on_channel, + GFP_KERNEL); + return 0; +} + + +/** + * brcmf_p2p_cancel_remain_on_channel() - cancel p2p listen state. + * + * @ifp: interfac control. + * + */ +void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) +{ + if (!ifp) + return; + brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + brcmf_p2p_notify_listen_complete(ifp, NULL, NULL); +} + + /** * brcmf_p2p_attach() - attach for P2P. * @@ -689,7 +783,11 @@ void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) */ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) { - brcmf_p2p_deinit_discovery(p2p); + if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif != NULL) { + brcmf_p2p_cancel_remain_on_channel( + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp); + brcmf_p2p_deinit_discovery(p2p); + } /* just set it all to zero */ memset(p2p, 0, sizeof(*p2p)); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index f304adf..df93272 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -60,10 +60,10 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_IF_DELETING: peer-to-peer vif delete sent to dongle. * @BRCMF_P2P_STATUS_IF_CHANGING: peer-to-peer vif change sent to dongle. * @BRCMF_P2P_STATUS_IF_CHANGED: peer-to-peer vif change completed on dongle. - * @BRCMF_P2P_STATUS_LISTEN_EXPIRED: listen duration expired. * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed. * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. + * @BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL: P2P listen, remaining on channel. */ enum brcmf_p2p_status { BRCMF_P2P_STATUS_IF_ADD = 0, @@ -71,10 +71,10 @@ enum brcmf_p2p_status { BRCMF_P2P_STATUS_IF_DELETING, BRCMF_P2P_STATUS_IF_CHANGING, BRCMF_P2P_STATUS_IF_CHANGED, - BRCMF_P2P_STATUS_LISTEN_EXPIRED, BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, BRCMF_P2P_STATUS_ACTION_TX_NOACK, - BRCMF_P2P_STATUS_GO_NEG_PHASE + BRCMF_P2P_STATUS_GO_NEG_PHASE, + BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL }; /** @@ -88,6 +88,7 @@ enum brcmf_p2p_status { * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state. * @ssid: ssid for P2P GO. * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. + * @remain_on_channel: contains copy of struct used by cfg80211. */ struct brcmf_p2p_info { struct brcmf_cfg80211_info *cfg; @@ -98,6 +99,7 @@ struct brcmf_p2p_info { struct timer_list listen_timer; struct brcmf_ssid ssid; u8 listen_channel; + struct ieee80211_channel remain_on_channel; }; void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); @@ -110,5 +112,12 @@ int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, struct cfg80211_scan_request *request); +int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, + struct ieee80211_channel *channel, + unsigned int duration, u64 *cookie); +int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); +void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6b4e877..6ab6397 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3359,6 +3359,11 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, mgmt_ie_len = &saved_ie->probe_req_ie_len; mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); break; + case BRCMF_VNDR_IE_PRBRSP_FLAG: + mgmt_ie_buf = saved_ie->probe_res_ie; + mgmt_ie_len = &saved_ie->probe_res_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); + break; default: err = -EPERM; brcmf_err("not suitable type\n"); @@ -3674,6 +3679,150 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, return err; } + +static void +brcmf_cfg80211_mgmt_frame_register(struct wiphy *wiphy, + struct wireless_dev *wdev, + u16 frame_type, bool reg) +{ + struct brcmf_if *ifp = netdev_priv(wdev->netdev); + struct brcmf_cfg80211_vif *vif = ifp->vif; + u16 mgmt_type; + + brcmf_dbg(TRACE, "Enter, frame_type %04x, reg=%d\n", frame_type, reg); + + mgmt_type = (frame_type & IEEE80211_FCTL_STYPE) >> 4; + if (reg) + vif->mgmt_rx_reg |= BIT(mgmt_type); + else + vif->mgmt_rx_reg |= ~BIT(mgmt_type); +} + + +static int +brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, + struct ieee80211_channel *chan, bool offchan, + unsigned int wait, const u8 *buf, size_t len, + bool no_cck, bool dont_wait_for_ack, u64 *cookie) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + const struct ieee80211_mgmt *mgmt; + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + s32 ie_offset; + s32 ie_len; + + brcmf_dbg(TRACE, "Enter\n"); + + *cookie = 0; + + mgmt = (const struct ieee80211_mgmt *)buf; + + if (ieee80211_is_mgmt(mgmt->frame_control)) { + if (ieee80211_is_probe_resp(mgmt->frame_control)) { + /* Right now the only reason to get a probe response */ + /* is for p2p listen response from wpa_supplicant. */ + /* Unfortunately the wpa_supplicant sends it on the */ + /* primary ndev, while dongle wants it on the p2p */ + /* vif. Since this is only reason for a probe */ + /* response to be sent, the vif is taken from cfg. */ + /* If ever desired to send proberesp for non p2p */ + /* response then data should be checked for */ + /* "DIRECT-". Note in future supplicant will take */ + /* dedicated p2p wdev to do this and then this 'hack'*/ + /* is not needed anymore. */ + ie_offset = DOT11_MGMT_HDR_LEN + + DOT11_BCN_PRB_FIXED_LEN; + ie_len = len - ie_offset; + + vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif == NULL) { + brcmf_err("No p2p device available for probe response\n"); + err = -ENODEV; + goto exit; + } + err = brcmf_vif_set_mgmt_ie(vif, + BRCMF_VNDR_IE_PRBRSP_FLAG, + &buf[ie_offset], + ie_len); + cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, + GFP_KERNEL); + goto exit; + } + } + brcmf_dbg(TRACE, "Unhandled, is_mgmt %d, fc=%04x!!!!!\n", + ieee80211_is_mgmt(mgmt->frame_control), mgmt->frame_control); +exit: + return err; +} + + +static int +brcmf_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy, + struct wireless_dev *wdev, + u64 cookie) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_cfg80211_vif *vif; + int err = 0; + + brcmf_dbg(TRACE, "Enter p2p listen cancel\n"); + + vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif == NULL) { + brcmf_err("No p2p device available for probe response\n"); + err = -ENODEV; + goto exit; + } + brcmf_p2p_cancel_remain_on_channel(vif->ifp); +exit: + return err; +} + +static s32 brcmf_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct wireless_dev *wdev; + struct brcmf_cfg80211_vif *vif = ifp->vif; + struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u16 chanspec = be16_to_cpu(rxframe->chanspec); + u8 *mgmt_frame; + u32 mgmt_frame_len; + s32 freq; + u16 mgmt_type; + + brcmf_dbg(INFO, + "Enter: event %d reason %d\n", e->event_code, e->reason); + + /* Firmware sends us two proberesponses for each idx one. At the */ + /* moment only bsscfgidx 0 is passed up to supplicant */ + if (e->bsscfgidx) + return 0; + + /* Check if wpa_supplicant has registered for this frame */ + brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); + mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; + if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) + return 0; + + mgmt_frame = (u8 *)(rxframe + 1); + mgmt_frame_len = e->datalen - sizeof(*rxframe); + freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), + CHSPEC_IS2G(chanspec) ? + IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ); + wdev = ifp->ndev->ieee80211_ptr; + cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC); + + brcmf_dbg(INFO, + "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", + mgmt_frame_len, e->datalen, chanspec, freq); + + return 0; +} + + static struct cfg80211_ops wl_cfg80211_ops = { .add_virtual_intf = brcmf_cfg80211_add_iface, .del_virtual_intf = brcmf_cfg80211_del_iface, @@ -3703,6 +3852,10 @@ static struct cfg80211_ops wl_cfg80211_ops = { .del_station = brcmf_cfg80211_del_station, .sched_scan_start = brcmf_cfg80211_sched_scan_start, .sched_scan_stop = brcmf_cfg80211_sched_scan_stop, + .mgmt_frame_register = brcmf_cfg80211_mgmt_frame_register, + .mgmt_tx = brcmf_cfg80211_mgmt_tx, + .remain_on_channel = brcmf_p2p_remain_on_channel, + .cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel, #ifdef CONFIG_NL80211_TESTMODE .testmode_cmd = brcmf_cfg80211_testmode #endif @@ -3765,6 +3918,30 @@ static const struct ieee80211_iface_combination brcmf_iface_combos[] = { } }; +static const struct ieee80211_txrx_stypes +brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_STATION] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_P2P_GO] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4) + } +}; + static struct wiphy *brcmf_setup_wiphy(struct device *phydev) { struct wiphy *wiphy; @@ -3797,10 +3974,10 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; wiphy->cipher_suites = __wl_cipher_suites; wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); - wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; /* enable power - * save mode - * by default - */ + wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | + WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + wiphy->mgmt_stypes = brcmf_txrx_stypes; + wiphy->max_remain_on_channel_duration = 5000; brcmf_wiphy_pno_params(wiphy); err = wiphy_register(wiphy); if (err < 0) { @@ -4271,6 +4448,10 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_notify_sched_scan_results); brcmf_fweh_register(cfg->pub, BRCMF_E_IF, brcmf_notify_vif_event); + brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_PROBEREQ_MSG, + brcmf_notify_rx_mgmt_p2p_probereq); + brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, + brcmf_p2p_notify_listen_complete); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 691f613..a996afa 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -189,6 +189,7 @@ struct vif_saved_ie { * @sme_state: SME state using enum brcmf_vif_status bits. * @pm_block: power-management blocked. * @list: linked list. + * @mgmt_rx_reg: registered rx mgmt frame types. */ struct brcmf_cfg80211_vif { struct brcmf_if *ifp; @@ -200,6 +201,7 @@ struct brcmf_cfg80211_vif { bool pm_block; struct vif_saved_ie saved_ie; struct list_head list; + u16 mgmt_rx_reg; }; /* association inform */ -- cgit v0.10.2 From 33a6b157f80af5e2a98a244b3dfff650bc5c7bcc Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:39 +0100 Subject: brcmfmac: fix compiler warning on printf format On 64-bit target a warning was given when using %d to print sizeof() value: CC [M] drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.o brcm80211/brcmfmac/wl_cfg80211.c: In function 'brcmf_alloc_vif': brcm80211/brcmfmac/wl_cfg80211.c:3884:2: error: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Werror=format] Fixed using %zu instead. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6ab6397..6cd47e2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3997,7 +3997,7 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, if (cfg->vif_cnt == BRCMF_IFACE_MAX_CNT) return ERR_PTR(-ENOSPC); - brcmf_dbg(TRACE, "allocating virtual interface (size=%d)\n", + brcmf_dbg(TRACE, "allocating virtual interface (size=%zu)\n", sizeof(*vif)); vif = kzalloc(sizeof(*vif), GFP_KERNEL); if (!vif) -- cgit v0.10.2 From de66efcadbb51935c8c668a38f2f1c187f349af9 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:40 +0100 Subject: brcmfmac: fix generation of the p2p related mac addresses The driver determines the P2P interface address and device address from the primary mac address. However, the function used an invalid input. This caused a mac address mismatch between firmware and driver. This was hidden because the brcmf_if_add() function corrected the error upon receiving the IF_ADD event from firmware. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index ecc96f3..cec4116 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -132,12 +132,10 @@ static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) */ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p) { - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - /* Generate the P2P Device Address. This consists of the device's * primary MAC address with the locally administered bit set. */ - memcpy(p2p->dev_addr, ndev->dev_addr, ETH_ALEN); + memcpy(p2p->dev_addr, p2p->cfg->pub->mac, ETH_ALEN); p2p->dev_addr[0] |= 0x02; /* Generate the P2P Interface Address. If the discovery and connection -- cgit v0.10.2 From 5f4f9f114eef4907b6077d19dd5ad7d0a27e0f80 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:41 +0100 Subject: brcmfmac: implement support for deleting virtual interfaces Deletion of the virtual interface was not fully supported so adding it now. Tested using p2p_connect command in wpa_supplicant. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 82724d3..c4f30bd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -150,6 +150,7 @@ #define BRCMF_E_REASON_MINTXRATE 9 #define BRCMF_E_REASON_TXFAIL 10 +#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 #define BRCMF_E_REASON_FAST_ROAM_FAILED 5 #define BRCMF_E_REASON_DIRECTED_ROAM 6 #define BRCMF_E_REASON_TSPEC_REJECTED 7 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index cec4116..fff5722 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -827,6 +827,26 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], return err; } +static int brcmf_p2p_disable_p2p_if(struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); + struct net_device *pri_ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(pri_ndev); + u8 *addr = vif->wdev.netdev->dev_addr; + + return brcmf_fil_iovar_data_set(ifp, "p2p_ifdis", addr, ETH_ALEN); +} + +static int brcmf_p2p_release_p2p_if(struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); + struct net_device *pri_ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(pri_ndev); + u8 *addr = vif->wdev.netdev->dev_addr; + + return brcmf_fil_iovar_data_set(ifp, "p2p_ifdel", addr, ETH_ALEN); +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -910,23 +930,43 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_cfg80211_vif *vif; + unsigned long jiffie_timeout = msecs_to_jiffies(1500); + bool wait_for_disable = false; int err; + brcmf_dbg(TRACE, "delete P2P vif\n"); vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); - if (brcmf_cfg80211_vif_event_armed(cfg)) - return -EBUSY; + switch (vif->wdev.iftype) { + case NL80211_IFTYPE_P2P_CLIENT: + if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state)) + wait_for_disable = true; + break; + + case NL80211_IFTYPE_P2P_GO: + if (!brcmf_p2p_disable_p2p_if(vif)) + wait_for_disable = true; + break; + + case NL80211_IFTYPE_P2P_DEVICE: + default: + return -ENOTSUPP; + break; + } + + if (wait_for_disable) + wait_for_completion_timeout(&cfg->vif_disabled, 500); + + brcmf_vif_clear_mgmt_ies(vif); brcmf_cfg80211_arm_vif_event(cfg, vif); - /* wait for firmware event */ - err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, - msecs_to_jiffies(1500)); + err = brcmf_p2p_release_p2p_if(vif); + if (!err) + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, + jiffie_timeout); brcmf_cfg80211_arm_vif_event(cfg, NULL); - if (wdev->netdev) - brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); - else - brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n", - wdev->identifier); - brcmf_err("enter - not supported yet\n"); - return -EOPNOTSUPP; + brcmf_free_vif(vif); + + return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6cd47e2..d792c3b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -445,9 +445,103 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, } } +static void brcmf_set_mpc(struct net_device *ndev, int mpc) +{ + struct brcmf_if *ifp = netdev_priv(ndev); + s32 err = 0; + + if (check_vif_up(ifp->vif)) { + err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); + if (err) { + brcmf_err("fail to set mpc\n"); + return; + } + brcmf_dbg(INFO, "MPC : %d\n", mpc); + } +} + +static s32 +brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + bool aborted, bool fw_abort) +{ + struct brcmf_scan_params_le params_le; + struct cfg80211_scan_request *scan_request; + s32 err = 0; + + brcmf_dbg(SCAN, "Enter\n"); + + /* clear scan request, because the FW abort can cause a second call */ + /* to this functon and might cause a double cfg80211_scan_done */ + scan_request = cfg->scan_request; + cfg->scan_request = NULL; + + if (timer_pending(&cfg->escan_timeout)) + del_timer_sync(&cfg->escan_timeout); + + if (fw_abort) { + /* Do a scan abort to stop the driver's scan engine */ + brcmf_dbg(SCAN, "ABORT scan in firmware\n"); + memset(¶ms_le, 0, sizeof(params_le)); + memset(params_le.bssid, 0xFF, ETH_ALEN); + params_le.bss_type = DOT11_BSSTYPE_ANY; + params_le.scan_type = 0; + params_le.channel_num = cpu_to_le32(1); + params_le.nprobes = cpu_to_le32(1); + params_le.active_time = cpu_to_le32(-1); + params_le.passive_time = cpu_to_le32(-1); + params_le.home_time = cpu_to_le32(-1); + /* Scan is aborted by setting channel_list[0] to -1 */ + params_le.channel_list[0] = cpu_to_le16(-1); + /* E-Scan (or anyother type) can be aborted by SCAN */ + err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN, + ¶ms_le, sizeof(params_le)); + if (err) + brcmf_err("Scan abort failed\n"); + } + /* + * e-scan can be initiated by scheduled scan + * which takes precedence. + */ + if (cfg->sched_escan) { + brcmf_dbg(SCAN, "scheduled scan completed\n"); + cfg->sched_escan = false; + if (!aborted) + cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); + brcmf_set_mpc(ndev, 1); + } else if (scan_request) { + brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", + aborted ? "Aborted" : "Done"); + cfg80211_scan_done(scan_request, aborted); + brcmf_set_mpc(ndev, 1); + } + if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { + brcmf_err("Scan complete while device not scanning\n"); + return -EPERM; + } + + return err; +} + static int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct net_device *ndev = wdev->netdev; + + /* vif event pending in firmware */ + if (brcmf_cfg80211_vif_event_armed(cfg)) + return -EBUSY; + + if (ndev) { + if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) && + cfg->escan_info.ndev == ndev) + brcmf_notify_escan_complete(cfg, ndev, true, + true); + + brcmf_fil_iovar_int_set(netdev_priv(ndev), "mpc", 1); + } + switch (wdev->iftype) { case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_STATION: @@ -525,21 +619,6 @@ done: return err; } -static void brcmf_set_mpc(struct net_device *ndev, int mpc) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - s32 err = 0; - - if (check_vif_up(ifp->vif)) { - err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); - if (err) { - brcmf_err("fail to set mpc\n"); - return; - } - brcmf_dbg(INFO, "MPC : %d\n", mpc); - } -} - static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, struct cfg80211_scan_request *request) { @@ -620,69 +699,6 @@ static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, } static s32 -brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, - struct net_device *ndev, - bool aborted, bool fw_abort) -{ - struct brcmf_scan_params_le params_le; - struct cfg80211_scan_request *scan_request; - s32 err = 0; - - brcmf_dbg(SCAN, "Enter\n"); - - /* clear scan request, because the FW abort can cause a second call */ - /* to this functon and might cause a double cfg80211_scan_done */ - scan_request = cfg->scan_request; - cfg->scan_request = NULL; - - if (timer_pending(&cfg->escan_timeout)) - del_timer_sync(&cfg->escan_timeout); - - if (fw_abort) { - /* Do a scan abort to stop the driver's scan engine */ - brcmf_dbg(SCAN, "ABORT scan in firmware\n"); - memset(¶ms_le, 0, sizeof(params_le)); - memset(params_le.bssid, 0xFF, ETH_ALEN); - params_le.bss_type = DOT11_BSSTYPE_ANY; - params_le.scan_type = 0; - params_le.channel_num = cpu_to_le32(1); - params_le.nprobes = cpu_to_le32(1); - params_le.active_time = cpu_to_le32(-1); - params_le.passive_time = cpu_to_le32(-1); - params_le.home_time = cpu_to_le32(-1); - /* Scan is aborted by setting channel_list[0] to -1 */ - params_le.channel_list[0] = cpu_to_le16(-1); - /* E-Scan (or anyother type) can be aborted by SCAN */ - err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN, - ¶ms_le, sizeof(params_le)); - if (err) - brcmf_err("Scan abort failed\n"); - } - /* - * e-scan can be initiated by scheduled scan - * which takes precedence. - */ - if (cfg->sched_escan) { - brcmf_dbg(SCAN, "scheduled scan completed\n"); - cfg->sched_escan = false; - if (!aborted) - cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); - brcmf_set_mpc(ndev, 1); - } else if (scan_request) { - brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", - aborted ? "Aborted" : "Done"); - cfg80211_scan_done(scan_request, aborted); - brcmf_set_mpc(ndev, 1); - } - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - brcmf_err("Scan complete while device not scanning\n"); - return -EPERM; - } - - return err; -} - -static s32 brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, struct cfg80211_scan_request *request, u16 action) { @@ -3474,6 +3490,22 @@ exit: return err; } +s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif) +{ + s32 pktflags[] = { + BRCMF_VNDR_IE_PRBREQ_FLAG, + BRCMF_VNDR_IE_PRBRSP_FLAG, + BRCMF_VNDR_IE_BEACON_FLAG + }; + int i; + + for (i = 0; i < ARRAY_SIZE(pktflags); i++) + brcmf_vif_set_mgmt_ie(vif, pktflags[i], NULL, 0); + + memset(&vif->saved_ie, 0, sizeof(vif->saved_ie)); + return 0; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) @@ -4260,6 +4292,12 @@ brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg, struct station_info sinfo; brcmf_dbg(CONN, "event %d, reason %d\n", event, reason); + if (event == BRCMF_E_LINK && reason == BRCMF_E_REASON_LINK_BSSCFG_DIS && + ndev != cfg_to_ndev(cfg)) { + brcmf_dbg(CONN, "AP mode link down\n"); + complete(&cfg->vif_disabled); + return 0; + } if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) && (reason == BRCMF_E_STATUS_SUCCESS)) { @@ -4316,6 +4354,8 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, } brcmf_link_down(ifp->vif); brcmf_init_prof(ndev_to_prof(ndev)); + if (ndev != cfg_to_ndev(cfg)) + complete(&cfg->vif_disabled); } else if (brcmf_is_nonetwork(cfg, e)) { if (brcmf_is_ibssmode(ifp->vif)) clear_bit(BRCMF_VIF_STATUS_CONNECTING, @@ -4401,7 +4441,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, case BRCMF_E_IF_DEL: ifp->vif = NULL; - brcmf_free_vif(vif); mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) @@ -4507,7 +4546,7 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) mutex_init(&cfg->usr_sync); brcmf_init_escan(cfg); brcmf_init_conf(cfg->conf); - + init_completion(&cfg->vif_disabled); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a996afa..5068188 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -148,6 +148,7 @@ struct brcmf_cfg80211_profile { * @BRCMF_VIF_STATUS_READY: ready for operation. * @BRCMF_VIF_STATUS_CONNECTING: connect/join in progress. * @BRCMF_VIF_STATUS_CONNECTED: connected/joined succesfully. + * @BRCMF_VIF_STATUS_DISCONNECTING: disconnect/disable in progress. * @BRCMF_VIF_STATUS_AP_CREATING: interface configured for AP operation. * @BRCMF_VIF_STATUS_AP_CREATED: AP operation started. */ @@ -155,6 +156,7 @@ enum brcmf_vif_status { BRCMF_VIF_STATUS_READY, BRCMF_VIF_STATUS_CONNECTING, BRCMF_VIF_STATUS_CONNECTED, + BRCMF_VIF_STATUS_DISCONNECTING, BRCMF_VIF_STATUS_AP_CREATING, BRCMF_VIF_STATUS_AP_CREATED }; @@ -405,6 +407,7 @@ struct brcmf_cfg80211_info { struct list_head vif_list; u8 vif_cnt; struct brcmf_cfg80211_vif_event vif_event; + struct completion vif_disabled; }; /** @@ -479,6 +482,7 @@ void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); +s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif); struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); u16 channel_to_chanspec(struct ieee80211_channel *ch); u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); -- cgit v0.10.2 From 0f8ffe177426e536def8f19f7eca5b895103c62a Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:42 +0100 Subject: brcmfmac: update escan for multiple bss and simplify. Add support for scanning on non primary netdev (p2p) and simplify the p2p scanning preparation. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fff5722..aef0287 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -91,11 +91,6 @@ struct brcmf_p2p_scan_le { }; }; -static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p) -{ - return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; -} - /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * @@ -195,34 +190,6 @@ static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, } /** - * brcmf_p2p_discover_disable_search() - reset discover state. - * - * @p2p: P2P specific data. - * - * Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success. - */ -static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p) -{ - struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - struct brcmf_p2p_disc_st_le discovery_mode; - int ret; - - /* - * vif presence indicates discovery is initialized. - */ - if (!vif) - return -ENODEV; - - ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state", - &discovery_mode, - sizeof(discovery_mode)); - if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN) - ret = brcmf_p2p_set_discover_state(vif->ifp, - WL_P2P_DISC_ST_SCAN, 0, 0); - return ret; -} - -/** * brcmf_p2p_init_discovery() - enable discovery in the firmware. * * @p2p: P2P specific data. @@ -376,32 +343,6 @@ exit: } /** - * brcmf_p2p_configure_probereq() - Configure probe request data. - * - * @p2p: P2P specific data. - * @ie: buffer containing information elements. - * @ie_len: length of @ie buffer. - * - */ -static int brcmf_p2p_configure_probereq(struct brcmf_p2p_info *p2p, - const u8 *ie, u32 ie_len) -{ - struct brcmf_cfg80211_vif *vif; - s32 err = 0; - - brcmf_dbg(TRACE, "enter\n"); - vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - - err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, - ie, ie_len); - - if (err < 0) - brcmf_err("set probreq ie occurs error %d\n", err); - - return err; -} - -/* * brcmf_p2p_escan() - initiate a P2P scan. * * @p2p: P2P specific data. @@ -621,12 +562,14 @@ exit: * * @wiphy: wiphy device. * @request: scan request from cfg80211. + * @vif: vif on which scan request is to be executed. * * Prepare the scan appropriately for type of scan requested. Overrides the * escan .run() callback for peer-to-peer scanning. */ int brcmf_p2p_scan_prep(struct wiphy *wiphy, - struct cfg80211_scan_request *request) + struct cfg80211_scan_request *request, + struct brcmf_cfg80211_vif *vif) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_p2p_info *p2p = &cfg->p2p; @@ -644,31 +587,16 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); err = brcmf_p2p_enable_discovery(p2p); - if (err == 0) - err = brcmf_p2p_configure_probereq(p2p, request->ie, - request->ie_len); + if (err) + return err; - /* - * override .run_escan() callback. - */ - cfg->escan_info.run = brcmf_p2p_run_escan; - } else { - /* - * legacy scan trigger - * So, we have to disable p2p discovery if p2p discovery is on - */ - (void)brcmf_p2p_discover_disable_search(p2p); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - /* - * clear p2p vendor ies for probe request set by - * previous p2p related scan(s). - */ - if (p2p_discover_vif(p2p)) - err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p), - BRCMF_VNDR_IE_PRBREQ_FLAG, - request->ie, - request->ie_len); + /* override .run_escan() callback. */ + cfg->escan_info.run = brcmf_p2p_run_escan; } + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, + request->ie, request->ie_len); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index df93272..1f97afd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -111,7 +111,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, - struct cfg80211_scan_request *request); + struct cfg80211_scan_request *request, + struct brcmf_cfg80211_vif *vif); int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *channel, unsigned int duration, u64 *cookie); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d792c3b..c57c1db 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -805,6 +805,12 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, return -EAGAIN; } + /* If scan req comes for p2p0, send it over primary I/F */ + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + ndev = ifp->ndev; + } + /* Arm scan timeout timer */ mod_timer(&cfg->escan_timeout, jiffies + WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000); @@ -824,7 +830,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); if (escan_req) { cfg->escan_info.run = brcmf_run_escan; - err = brcmf_p2p_scan_prep(wiphy, request); + err = brcmf_p2p_scan_prep(wiphy, request, ifp->vif); if (err) goto scan_out; -- cgit v0.10.2 From 7ee2d926002daa5779277360613f296f27d2127b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:43 +0100 Subject: brcmfmac: update p2p add and delete vif routines. Improve exception handling. Store and removed created vif in cfg.p2p.bss array. Fix big endian bug. Fix msec jiffies bug. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index d21d9b2..7707194 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -29,7 +29,7 @@ enum brcmf_fil_p2p_if_types { struct brcmf_fil_p2p_if_le { u8 addr[ETH_ALEN]; - enum brcmf_fil_p2p_if_types type; + __le16 type; __le16 chspec; }; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index aef0287..d2cefb4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -739,7 +739,7 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], /* fill the firmware request */ memcpy(if_request.addr, ea, ETH_ALEN); - if_request.type = iftype; + if_request.type = cpu_to_le16((u16)iftype); if_request.chspec = cpu_to_le16(chanspec); err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request, @@ -747,11 +747,6 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], if (err) return err; - if (iftype == BRCMF_FIL_P2P_IF_GO) { - /* set station timeout for p2p */ - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, - BRCMF_SCB_TIMEOUT_VALUE); - } return err; } @@ -814,11 +809,15 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, } vif = brcmf_alloc_vif(cfg, type, false); + if (IS_ERR(vif)) + return (struct wireless_dev *)vif; brcmf_cfg80211_arm_vif_event(cfg, vif); err = brcmf_p2p_request_p2p_if(ifp, cfg->p2p.int_addr, iftype); - if (err) + if (err) { + brcmf_cfg80211_arm_vif_event(cfg, NULL); goto fail; + } /* wait for firmware event */ err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, @@ -835,10 +834,19 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, if (!ifp) { brcmf_err("no if pointer provided\n"); err = -ENOENT; + goto fail; } strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); brcmf_cfg80211_vif_complete(cfg); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; + /* Disable firmware roaming for P2P interface */ + brcmf_fil_iovar_int_set(ifp, "roam_off", 1); + if (iftype == BRCMF_FIL_P2P_IF_GO) { + /* set station timeout for p2p */ + brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, + BRCMF_SCB_TIMEOUT_VALUE); + } return &ifp->vif->wdev; fail: @@ -883,18 +891,25 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) } if (wait_for_disable) - wait_for_completion_timeout(&cfg->vif_disabled, 500); + wait_for_completion_timeout(&cfg->vif_disabled, + msecs_to_jiffies(500)); brcmf_vif_clear_mgmt_ies(vif); brcmf_cfg80211_arm_vif_event(cfg, vif); err = brcmf_p2p_release_p2p_if(vif); - if (!err) + if (!err) { /* wait for firmware event */ err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, jiffie_timeout); + if (!err) + err = -EIO; + else + err = 0; + } brcmf_cfg80211_arm_vif_event(cfg, NULL); brcmf_free_vif(vif); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; } -- cgit v0.10.2 From 7a5c1f64f64c8504c8117558a426b610ebc77aa0 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:44 +0100 Subject: brcmfmac: add p2p change vif routines. Add support for changing existing interface into p2p go interface. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index b469bd1..451b89c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -26,6 +26,7 @@ #include "dhd_bus.h" #include "dhd_proto.h" #include "dhd_dbg.h" +#include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index d2cefb4..fa0127e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -718,24 +718,105 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) memset(p2p, 0, sizeof(*p2p)); } -static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], - enum brcmf_fil_p2p_if_types iftype) +/** + * brcmf_p2p_get_current_chanspec() - Get current operation channel. + * + * @p2p: P2P specific data. + * @chanspec: chanspec to be returned. + */ +static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, + u16 *chanspec) { - struct brcmf_fil_p2p_if_le if_request; + struct brcmf_if *ifp; struct brcmf_fil_chan_info_le ci; - u16 chanspec = 11 & WL_CHANSPEC_CHAN_MASK; - int err; + s32 err; + + ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + + *chanspec = 11 & WL_CHANSPEC_CHAN_MASK; - /* we need a default channel */ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); if (!err) { - chanspec = le32_to_cpu(ci.hw_channel) & WL_CHANSPEC_CHAN_MASK; - if (chanspec < CH_MAX_2G_CHANNEL) - chanspec |= WL_CHANSPEC_BAND_2G; + *chanspec = le32_to_cpu(ci.hw_channel) & WL_CHANSPEC_CHAN_MASK; + if (*chanspec < CH_MAX_2G_CHANNEL) + *chanspec |= WL_CHANSPEC_BAND_2G; else - chanspec |= WL_CHANSPEC_BAND_5G; + *chanspec |= WL_CHANSPEC_BAND_5G; + } + *chanspec |= WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE; +} + +/** + * Change a P2P Role. + * Parameters: + * @mac: MAC address of the BSS to change a role + * Returns 0 if success. + */ +int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, + enum brcmf_fil_p2p_if_types if_type) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_cfg80211_vif *vif; + struct brcmf_fil_p2p_if_le if_request; + s32 err; + u16 chanspec; + + brcmf_dbg(TRACE, "Enter\n"); + + vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + if (!vif) { + brcmf_err("vif for P2PAPI_BSSCFG_PRIMARY does not exist\n"); + return -EPERM; } - chanspec |= WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE; + brcmf_notify_escan_complete(cfg, vif->ifp->ndev, true, true); + vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; + if (!vif) { + brcmf_err("vif for P2PAPI_BSSCFG_CONNECTION does not exist\n"); + return -EPERM; + } + brcmf_set_mpc(vif->ifp->ndev, 0); + + /* In concurrency case, STA may be already associated in a particular */ + /* channel. so retrieve the current channel of primary interface and */ + /* then start the virtual interface on that. */ + brcmf_p2p_get_current_chanspec(p2p, &chanspec); + + if_request.type = cpu_to_le16((u16)if_type); + if_request.chspec = cpu_to_le16(chanspec); + memcpy(if_request.addr, p2p->int_addr, sizeof(if_request.addr)); + + brcmf_cfg80211_arm_vif_event(cfg, vif); + err = brcmf_fil_iovar_data_set(vif->ifp, "p2p_ifupd", &if_request, + sizeof(if_request)); + if (err) { + brcmf_err("p2p_ifupd FAILED, err=%d\n", err); + brcmf_cfg80211_arm_vif_event(cfg, NULL); + return err; + } + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_CHANGE, + msecs_to_jiffies(1500)); + brcmf_cfg80211_arm_vif_event(cfg, NULL); + if (!err) { + brcmf_err("No BRCMF_E_IF_CHANGE event received\n"); + return -EIO; + } + + err = brcmf_fil_cmd_int_set(vif->ifp, BRCMF_C_SET_SCB_TIMEOUT, + BRCMF_SCB_TIMEOUT_VALUE); + + return err; +} + +static int brcmf_p2p_request_p2p_if(struct brcmf_p2p_info *p2p, + struct brcmf_if *ifp, u8 ea[ETH_ALEN], + enum brcmf_fil_p2p_if_types iftype) +{ + struct brcmf_fil_p2p_if_le if_request; + int err; + u16 chanspec; + + /* we need a default channel */ + brcmf_p2p_get_current_chanspec(p2p, &chanspec); /* fill the firmware request */ memcpy(if_request.addr, ea, ETH_ALEN); @@ -813,7 +894,8 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return (struct wireless_dev *)vif; brcmf_cfg80211_arm_vif_event(cfg, vif); - err = brcmf_p2p_request_p2p_if(ifp, cfg->p2p.int_addr, iftype); + err = brcmf_p2p_request_p2p_if(&cfg->p2p, ifp, cfg->p2p.int_addr, + iftype); if (err) { brcmf_cfg80211_arm_vif_event(cfg, NULL); goto fail; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 1f97afd..1bf57c1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -108,6 +108,8 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params); int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); +int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, + enum brcmf_fil_p2p_if_types if_type); int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c57c1db..27436f2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -26,6 +26,7 @@ #include #include "dhd.h" #include "dhd_dbg.h" +#include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" @@ -445,7 +446,7 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, } } -static void brcmf_set_mpc(struct net_device *ndev, int mpc) +void brcmf_set_mpc(struct net_device *ndev, int mpc) { struct brcmf_if *ifp = netdev_priv(ndev); s32 err = 0; @@ -460,7 +461,7 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc) } } -static s32 +s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, bool aborted, bool fw_abort) @@ -567,6 +568,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_cfg80211_vif *vif = ifp->vif; s32 infra = 0; @@ -590,6 +592,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, infra = 1; break; case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: vif->mode = WL_MODE_AP; ap = 1; break; @@ -599,8 +602,14 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, } if (ap) { - set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state); - brcmf_dbg(INFO, "IF Type = AP\n"); + if (type == NL80211_IFTYPE_P2P_GO) { + brcmf_dbg(INFO, "IF Type = P2P GO\n"); + err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO); + } + if (!err) { + set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state); + brcmf_dbg(INFO, "IF Type = AP\n"); + } } else { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra); if (err) { @@ -4422,7 +4431,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, ifevent->action, ifevent->flags, ifevent->ifidx, ifevent->bssidx); - mutex_lock(&event->vif_event_lock); event->action = ifevent->action; vif = event->vif; @@ -4453,6 +4461,11 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, wake_up(&event->vif_wq); return 0; + case BRCMF_E_IF_CHANGE: + mutex_unlock(&event->vif_event_lock); + wake_up(&event->vif_wq); + return 0; + default: mutex_unlock(&event->vif_event_lock); break; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 5068188..2155308 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -492,5 +492,9 @@ bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, u8 action, ulong timeout); void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *info); +s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + bool aborted, bool fw_abort); +void brcmf_set_mpc(struct net_device *ndev, int mpc); #endif /* _wl_cfg80211_h_ */ -- cgit v0.10.2 From 318a64cede8882964b6412aceebe657dab46b2d2 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:45 +0100 Subject: brcmfmac: Fix bug mgmt_rx_register Mask is OR-ed with value in case of deregister. Should be AND-ed. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 27436f2..9a82dd4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3742,7 +3742,7 @@ brcmf_cfg80211_mgmt_frame_register(struct wiphy *wiphy, if (reg) vif->mgmt_rx_reg |= BIT(mgmt_type); else - vif->mgmt_rx_reg |= ~BIT(mgmt_type); + vif->mgmt_rx_reg &= ~BIT(mgmt_type); } -- cgit v0.10.2 From 89286dc9452082c710e0767f3191b03421601214 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:46 +0100 Subject: brcmfmac: Update connect setup/handling routines for multiple bss. In preparation of p2p connections update the sta connect setup and handling routines. Use join iovar and bsscfg commands where applicable. Handle assoc ind per bsscfg (vif) and generalize vndr ie setup to support assoc IEs and support all setup types, e.g. sta, ap and p2p. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index c4f30bd..c4a6083 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -377,6 +377,28 @@ struct brcmf_join_params { struct brcmf_assoc_params_le params_le; }; +/* scan params for extended join */ +struct brcmf_join_scan_params_le { + u8 scan_type; /* 0 use default, active or passive scan */ + __le32 nprobes; /* -1 use default, nr of probes per channel */ + __le32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + __le32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + __le32 home_time; /* -1 use default, dwell time for the home + * channel between channel scans + */ +}; + +/* extended join params */ +struct brcmf_ext_join_params_le { + struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ + struct brcmf_join_scan_params_le scan_le; + struct brcmf_assoc_params_le assoc_le; +}; + struct brcmf_wsec_key { u32 index; /* key index */ u32 len; /* key length */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 9a82dd4..3112265 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -49,6 +49,7 @@ #define WPA_OUI_TYPE 1 #define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */ #define WME_OUI_TYPE 2 +#define WPS_OUI_TYPE 4 #define VS_IE_FIXED_HDR_LEN 6 #define WPA_IE_VERSION_LEN 2 @@ -79,6 +80,10 @@ #define DOT11_MGMT_HDR_LEN 24 /* d11 management header len */ #define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */ +#define BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS 320 +#define BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS 400 +#define BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS 20 + #define BRCMF_ASSOC_PARAMS_FIXED_SIZE \ (sizeof(struct brcmf_assoc_params_le) - sizeof(u16)) @@ -388,6 +393,86 @@ u16 channel_to_chanspec(struct ieee80211_channel *ch) return chanspec; } +/* Traverse a string of 1-byte tag/1-byte length/variable-length value + * triples, returning a pointer to the substring whose first element + * matches tag + */ +struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) +{ + struct brcmf_tlv *elt; + int totlen; + + elt = (struct brcmf_tlv *)buf; + totlen = buflen; + + /* find tagged parameter */ + while (totlen >= TLV_HDR_LEN) { + int len = elt->len; + + /* validate remaining totlen */ + if ((elt->id == key) && (totlen >= (len + TLV_HDR_LEN))) + return elt; + + elt = (struct brcmf_tlv *)((u8 *)elt + (len + TLV_HDR_LEN)); + totlen -= (len + TLV_HDR_LEN); + } + + return NULL; +} + +/* Is any of the tlvs the expected entry? If + * not update the tlvs buffer pointer/length. + */ +static bool +brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len, + u8 *oui, u32 oui_len, u8 type) +{ + /* If the contents match the OUI and the type */ + if (ie[TLV_LEN_OFF] >= oui_len + 1 && + !memcmp(&ie[TLV_BODY_OFF], oui, oui_len) && + type == ie[TLV_BODY_OFF + oui_len]) { + return true; + } + + if (tlvs == NULL) + return false; + /* point to the next ie */ + ie += ie[TLV_LEN_OFF] + TLV_HDR_LEN; + /* calculate the length of the rest of the buffer */ + *tlvs_len -= (int)(ie - *tlvs); + /* update the pointer to the start of the buffer */ + *tlvs = ie; + + return false; +} + +static struct brcmf_vs_tlv * +brcmf_find_wpaie(u8 *parse, u32 len) +{ + struct brcmf_tlv *ie; + + while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { + if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, + WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE)) + return (struct brcmf_vs_tlv *)ie; + } + return NULL; +} + +static struct brcmf_vs_tlv * +brcmf_find_wpsie(u8 *parse, u32 len) +{ + struct brcmf_tlv *ie; + + while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { + if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, + WPA_OUI, TLV_OUI_LEN, WPS_OUI_TYPE)) + return (struct brcmf_vs_tlv *)ie; + } + return NULL; +} + + static void convert_key_from_CPU(struct brcmf_wsec_key *key, struct brcmf_wsec_key_le *key_le) { @@ -1201,7 +1286,7 @@ static s32 brcmf_set_wpa_version(struct net_device *ndev, else val = WPA_AUTH_DISABLED; brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val); - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "wpa_auth", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val); if (err) { brcmf_err("set wpa_auth failed (%d)\n", err); return err; @@ -1240,7 +1325,7 @@ static s32 brcmf_set_auth_type(struct net_device *ndev, break; } - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "auth", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "auth", val); if (err) { brcmf_err("set auth failed (%d)\n", err); return err; @@ -1304,7 +1389,12 @@ brcmf_set_set_cipher(struct net_device *ndev, } brcmf_dbg(CONN, "pval (%d) gval (%d)\n", pval, gval); - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "wsec", pval | gval); + /* In case of privacy, but no security and WPS then simulate */ + /* setting AES. WPS-2.0 allows no security */ + if (brcmf_find_wpsie(sme->ie, sme->ie_len) && !pval && !gval && + sme->privacy) + pval = AES_ENABLED; + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", pval | gval); if (err) { brcmf_err("error (%d)\n", err); return err; @@ -1326,8 +1416,8 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) s32 err = 0; if (sme->crypto.n_akm_suites) { - err = brcmf_fil_iovar_int_get(netdev_priv(ndev), - "wpa_auth", &val); + err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), + "wpa_auth", &val); if (err) { brcmf_err("could not get wpa_auth (%d)\n", err); return err; @@ -1361,8 +1451,8 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) } brcmf_dbg(CONN, "setting wpa_auth to %d\n", val); - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), - "wpa_auth", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), + "wpa_auth", val); if (err) { brcmf_err("could not set wpa_auth (%d)\n", err); return err; @@ -1468,7 +1558,11 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, struct ieee80211_channel *chan = sme->channel; struct brcmf_join_params join_params; size_t join_params_size; - struct brcmf_ssid ssid; + struct brcmf_tlv *rsn_ie; + struct brcmf_vs_tlv *wpa_ie; + void *ie; + u32 ie_len; + struct brcmf_ext_join_params_le *ext_join_params; u16 chanspec; s32 err = 0; @@ -1482,6 +1576,34 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, return -EOPNOTSUPP; } + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { + /* A normal (non P2P) connection request setup. */ + ie = NULL; + ie_len = 0; + /* find the WPA_IE */ + wpa_ie = brcmf_find_wpaie((u8 *)sme->ie, sme->ie_len); + if (wpa_ie) { + ie = wpa_ie; + ie_len = wpa_ie->len + TLV_HDR_LEN; + } else { + /* find the RSN_IE */ + rsn_ie = brcmf_parse_tlvs((u8 *)sme->ie, sme->ie_len, + WLAN_EID_RSN); + if (rsn_ie) { + ie = rsn_ie; + ie_len = rsn_ie->len + TLV_HDR_LEN; + } + } + brcmf_fil_iovar_data_set(ifp, "wpaie", ie, ie_len); + } + + err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG, + sme->ie, sme->ie_len); + if (err) + brcmf_err("Set Assoc REQ IE Failed\n"); + else + brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n"); + set_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); if (chan) { @@ -1528,20 +1650,78 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, goto done; } + profile->ssid.SSID_len = min_t(u32, (u32)sizeof(profile->ssid.SSID), + (u32)sme->ssid_len); + memcpy(&profile->ssid.SSID, sme->ssid, profile->ssid.SSID_len); + if (profile->ssid.SSID_len < IEEE80211_MAX_SSID_LEN) { + profile->ssid.SSID[profile->ssid.SSID_len] = 0; + brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n", profile->ssid.SSID, + profile->ssid.SSID_len); + } + + /* Join with specific BSSID and cached SSID + * If SSID is zero join based on BSSID only + */ + join_params_size = offsetof(struct brcmf_ext_join_params_le, assoc_le) + + offsetof(struct brcmf_assoc_params_le, chanspec_list); + if (cfg->channel) + join_params_size += sizeof(u16); + ext_join_params = kzalloc(join_params_size, GFP_KERNEL); + if (ext_join_params == NULL) { + err = -ENOMEM; + goto done; + } + ext_join_params->ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); + memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, + profile->ssid.SSID_len); + /*increase dwell time to receive probe response or detect Beacon + * from target AP at a noisy air only during connect command + */ + ext_join_params->scan_le.active_time = + cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS); + ext_join_params->scan_le.passive_time = + cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS); + /* Set up join scan parameters */ + ext_join_params->scan_le.scan_type = -1; + /* to sync with presence period of VSDB GO. + * Send probe request more frequently. Probe request will be stopped + * when it gets probe response from target AP/GO. + */ + ext_join_params->scan_le.nprobes = + cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS / + BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS); + ext_join_params->scan_le.home_time = cpu_to_le32(-1); + + if (sme->bssid) + memcpy(&ext_join_params->assoc_le.bssid, sme->bssid, ETH_ALEN); + else + memset(&ext_join_params->assoc_le.bssid, 0xFF, ETH_ALEN); + + if (cfg->channel) { + ext_join_params->assoc_le.chanspec_num = cpu_to_le32(1); + + ext_join_params->assoc_le.chanspec_list[0] = + cpu_to_le16(chanspec); + } + + err = brcmf_fil_bsscfg_data_set(ifp, "join", ext_join_params, + join_params_size); + kfree(ext_join_params); + if (!err) + /* This is it. join command worked, we are done */ + goto done; + + /* join command failed, fallback to set ssid */ memset(&join_params, 0, sizeof(join_params)); join_params_size = sizeof(join_params.ssid_le); - profile->ssid.SSID_len = min_t(u32, - sizeof(ssid.SSID), (u32)sme->ssid_len); memcpy(&join_params.ssid_le.SSID, sme->ssid, profile->ssid.SSID_len); - memcpy(&profile->ssid.SSID, sme->ssid, profile->ssid.SSID_len); join_params.ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); - memset(join_params.params_le.bssid, 0xFF, ETH_ALEN); - - if (ssid.SSID_len < IEEE80211_MAX_SSID_LEN) - brcmf_dbg(CONN, "ssid \"%s\", len (%d)\n", - ssid.SSID, ssid.SSID_len); + if (sme->bssid) + memcpy(join_params.params_le.bssid, sme->bssid, ETH_ALEN); + else + memset(join_params.params_le.bssid, 0xFF, ETH_ALEN); if (cfg->channel) { join_params.params_le.chanspec_list[0] = cpu_to_le16(chanspec); @@ -1551,7 +1731,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, &join_params, join_params_size); if (err) - brcmf_err("WLC_SET_SSID failed (%d)\n", err); + brcmf_err("BRCMF_C_SET_SSID failed (%d)\n", err); done: if (err) @@ -2010,7 +2190,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, goto done; } /* Report the current tx rate */ - err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate); + err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate); if (err) { brcmf_err("Could not get rate (%d)\n", err); goto done; @@ -2255,78 +2435,10 @@ static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) return vif->mode == WL_MODE_IBSS; } -/* - * Traverse a string of 1-byte tag/1-byte length/variable-length value - * triples, returning a pointer to the substring whose first element - * matches tag - */ -struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) -{ - struct brcmf_tlv *elt; - int totlen; - - elt = (struct brcmf_tlv *) buf; - totlen = buflen; - - /* find tagged parameter */ - while (totlen >= TLV_HDR_LEN) { - int len = elt->len; - - /* validate remaining totlen */ - if ((elt->id == key) && (totlen >= (len + TLV_HDR_LEN))) - return elt; - - elt = (struct brcmf_tlv *) ((u8 *) elt + (len + TLV_HDR_LEN)); - totlen -= (len + TLV_HDR_LEN); - } - - return NULL; -} - -/* Is any of the tlvs the expected entry? If - * not update the tlvs buffer pointer/length. - */ -static bool -brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len, - u8 *oui, u32 oui_len, u8 type) -{ - /* If the contents match the OUI and the type */ - if (ie[TLV_LEN_OFF] >= oui_len + 1 && - !memcmp(&ie[TLV_BODY_OFF], oui, oui_len) && - type == ie[TLV_BODY_OFF + oui_len]) { - return true; - } - - if (tlvs == NULL) - return false; - /* point to the next ie */ - ie += ie[TLV_LEN_OFF] + TLV_HDR_LEN; - /* calculate the length of the rest of the buffer */ - *tlvs_len -= (int)(ie - *tlvs); - /* update the pointer to the start of the buffer */ - *tlvs = ie; - - return false; -} - -static struct brcmf_vs_tlv * -brcmf_find_wpaie(u8 *parse, u32 len) +static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp) { - struct brcmf_tlv *ie; - - while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { - if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, - WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE)) - return (struct brcmf_vs_tlv *)ie; - } - return NULL; -} - -static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg) -{ - struct net_device *ndev = cfg_to_ndev(cfg); - struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); - struct brcmf_if *ifp = netdev_priv(ndev); + struct brcmf_cfg80211_profile *profile = ndev_to_prof(ifp->ndev); struct brcmf_bss_info_le *bi; struct brcmf_ssid *ssid; struct brcmf_tlv *tim; @@ -3366,40 +3478,31 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, if (!iovar_ie_buf) return -ENOMEM; curr_ie_buf = iovar_ie_buf; - if (ifp->vif->mode == WL_MODE_AP) { - switch (pktflag) { - case BRCMF_VNDR_IE_PRBRSP_FLAG: - mgmt_ie_buf = saved_ie->probe_res_ie; - mgmt_ie_len = &saved_ie->probe_res_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); - break; - case BRCMF_VNDR_IE_BEACON_FLAG: - mgmt_ie_buf = saved_ie->beacon_ie; - mgmt_ie_len = &saved_ie->beacon_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); - break; - default: - err = -EPERM; - brcmf_err("not suitable type\n"); - goto exit; - } - } else { - switch (pktflag) { - case BRCMF_VNDR_IE_PRBREQ_FLAG: - mgmt_ie_buf = saved_ie->probe_req_ie; - mgmt_ie_len = &saved_ie->probe_req_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); - break; - case BRCMF_VNDR_IE_PRBRSP_FLAG: - mgmt_ie_buf = saved_ie->probe_res_ie; - mgmt_ie_len = &saved_ie->probe_res_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); - break; - default: - err = -EPERM; - brcmf_err("not suitable type\n"); - goto exit; - } + switch (pktflag) { + case BRCMF_VNDR_IE_PRBREQ_FLAG: + mgmt_ie_buf = saved_ie->probe_req_ie; + mgmt_ie_len = &saved_ie->probe_req_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); + break; + case BRCMF_VNDR_IE_PRBRSP_FLAG: + mgmt_ie_buf = saved_ie->probe_res_ie; + mgmt_ie_len = &saved_ie->probe_res_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); + break; + case BRCMF_VNDR_IE_BEACON_FLAG: + mgmt_ie_buf = saved_ie->beacon_ie; + mgmt_ie_len = &saved_ie->beacon_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); + break; + case BRCMF_VNDR_IE_ASSOCREQ_FLAG: + mgmt_ie_buf = saved_ie->assoc_req_ie; + mgmt_ie_len = &saved_ie->assoc_req_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->assoc_req_ie); + break; + default: + err = -EPERM; + brcmf_err("not suitable type\n"); + goto exit; } if (vndr_ie_len > mgmt_ie_buf_len) { @@ -4138,9 +4241,9 @@ static void brcmf_clear_assoc_ies(struct brcmf_cfg80211_info *cfg) conn_info->resp_ie_len = 0; } -static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg) +static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp) { - struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); struct brcmf_cfg80211_assoc_ielen_le *assoc_info; struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); u32 req_len; @@ -4216,9 +4319,9 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, brcmf_dbg(TRACE, "Enter\n"); - brcmf_get_assoc_ies(cfg); + brcmf_get_assoc_ies(cfg, ifp); memcpy(profile->bssid, e->addr, ETH_ALEN); - brcmf_update_bss_info(cfg); + brcmf_update_bss_info(cfg, ifp); buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); if (buf == NULL) { @@ -4273,9 +4376,11 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg, if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) { if (completed) { - brcmf_get_assoc_ies(cfg); + brcmf_get_assoc_ies(cfg, ifp); memcpy(profile->bssid, e->addr, ETH_ALEN); - brcmf_update_bss_info(cfg); + brcmf_update_bss_info(cfg, ifp); + set_bit(BRCMF_VIF_STATUS_CONNECTED, + &ifp->vif->sme_state); } cfg80211_connect_result(ndev, (u8 *)profile->bssid, @@ -4286,9 +4391,6 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg, completed ? WLAN_STATUS_SUCCESS : WLAN_STATUS_AUTH_TIMEOUT, GFP_KERNEL); - if (completed) - set_bit(BRCMF_VIF_STATUS_CONNECTED, - &ifp->vif->sme_state); brcmf_dbg(CONN, "Report connect result - connection %s\n", completed ? "succeeded" : "failed"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 2155308..2595712 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -175,9 +175,11 @@ struct vif_saved_ie { u8 probe_req_ie[VNDR_IES_BUF_LEN]; u8 probe_res_ie[IE_MAX_LEN]; u8 beacon_ie[IE_MAX_LEN]; + u8 assoc_req_ie[IE_MAX_LEN]; u32 probe_req_ie_len; u32 probe_res_ie_len; u32 beacon_ie_len; + u32 assoc_req_ie_len; }; /** -- cgit v0.10.2 From a0f07959ee6e7f5be147ca4c3906b9d7fd173ea0 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:47 +0100 Subject: brcmfmac: Update AP mode for GO creation. With this update it is possible to create an P2P go. Handle the p2p go role in creation and the update beacon from cfg80211. Also store primary bss in global struct. Needed to map cfg device back to primary device. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 7707194..2c4ca59 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -39,4 +39,9 @@ struct brcmf_fil_chan_info_le { __le32 scan_channel; }; +struct brcmf_fil_bss_enable_le { + __le32 bsscfg_idx; + __le32 enable; +}; + #endif /* FWIL_TYPES_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fa0127e..d5f9711 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -691,15 +691,17 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) * * @cfg: driver private data for cfg80211 interface. */ -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { struct brcmf_p2p_info *p2p; p2p = &cfg->p2p; p2p->cfg = cfg; - brcmf_p2p_set_firmware(p2p); + p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = vif; brcmf_p2p_generate_bss_mac(p2p); + brcmf_p2p_set_firmware(p2p); } /** diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 1bf57c1..4c1819c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -102,7 +102,8 @@ struct brcmf_p2p_info { struct ieee80211_channel remain_on_channel; }; -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 3112265..c94d536 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3625,9 +3625,37 @@ s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif) } static s32 +brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, + struct cfg80211_beacon_data *beacon) +{ + s32 err; + + /* Set Beacon IEs to FW */ + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_BEACON_FLAG, + beacon->tail, beacon->tail_len); + if (err) { + brcmf_err("Set Beacon IE Failed\n"); + return err; + } + brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n"); + + /* Set Probe Response IEs to FW */ + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBRSP_FLAG, + beacon->proberesp_ies, + beacon->proberesp_ies_len); + if (err) + brcmf_err("Set Probe Resp IE Failed\n"); + else + brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n"); + + return err; +} + +static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); s32 ie_offset; struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; @@ -3636,6 +3664,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_tlv *rsn_ie; struct brcmf_vs_tlv *wpa_ie; struct brcmf_join_params join_params; + enum nl80211_iftype dev_role; + struct brcmf_fil_bss_enable_le bss_enable; brcmf_dbg(TRACE, "channel_type=%d, beacon_interval=%d, dtim_period=%d,\n", cfg80211_get_chandef_type(&settings->chandef), @@ -3645,9 +3675,21 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, settings->ssid, settings->ssid_len, settings->auth_type, settings->inactivity_timeout); - if (!test_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state)) { - brcmf_err("Not in AP creation mode\n"); - return -EPERM; + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { + brcmf_dbg(TRACE, "Role = AP\n"); + dev_role = NL80211_IFTYPE_AP; + if (!test_bit(BRCMF_VIF_STATUS_AP_CREATING, + &ifp->vif->sme_state)) { + brcmf_err("Not in AP creation mode\n"); + return -EPERM; + } + } else { + brcmf_dbg(TRACE, "Role = P2P GO\n"); + dev_role = NL80211_IFTYPE_P2P_GO; + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + ndev = ifp->ndev; + } } memset(&ssid_le, 0, sizeof(ssid_le)); @@ -3669,21 +3711,6 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } brcmf_set_mpc(ndev, 0); - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); - if (err < 0) { - brcmf_err("BRCMF_C_DOWN error %d\n", err); - goto exit; - } - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1); - if (err < 0) { - brcmf_err("SET INFRA error %d\n", err); - goto exit; - } - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1); - if (err < 0) { - brcmf_err("setting AP mode failed %d\n", err); - goto exit; - } /* find the RSN_IE */ rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, @@ -3711,25 +3738,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(TRACE, "No WPA(2) IEs found\n"); brcmf_configure_opensecurity(ifp); } - /* Set Beacon IEs to FW */ - err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - BRCMF_VNDR_IE_BEACON_FLAG, - settings->beacon.tail, - settings->beacon.tail_len); - if (err) - brcmf_err("Set Beacon IE Failed\n"); - else - brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n"); - /* Set Probe Response IEs to FW */ - err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - BRCMF_VNDR_IE_PRBRSP_FLAG, - settings->beacon.proberesp_ies, - settings->beacon.proberesp_ies_len); - if (err) - brcmf_err("Set Probe Resp IE Failed\n"); - else - brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n"); + brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); if (settings->beacon_interval) { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, @@ -3747,23 +3757,62 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, goto exit; } } - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); - if (err < 0) { - brcmf_err("BRCMF_C_UP error (%d)\n", err); - goto exit; + + if (dev_role == NL80211_IFTYPE_AP) { + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); + if (err < 0) { + brcmf_err("BRCMF_C_DOWN error %d\n", err); + goto exit; + } brcmf_fil_iovar_int_set(ifp, "apsta", 0); } - memset(&join_params, 0, sizeof(join_params)); - /* join parameters starts with ssid */ - memcpy(&join_params.ssid_le, &ssid_le, sizeof(ssid_le)); - /* create softap */ - err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, - &join_params, sizeof(join_params)); + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1); if (err < 0) { - brcmf_err("SET SSID error (%d)\n", err); + brcmf_err("SET INFRA error %d\n", err); goto exit; } + if (dev_role == NL80211_IFTYPE_AP) { + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1); + if (err < 0) { + brcmf_err("setting AP mode failed %d\n", err); + goto exit; + } + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); + if (err < 0) { + brcmf_err("BRCMF_C_UP error (%d)\n", err); + goto exit; + } + + memset(&join_params, 0, sizeof(join_params)); + /* join parameters starts with ssid */ + memcpy(&join_params.ssid_le, &ssid_le, sizeof(ssid_le)); + /* create softap */ + err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, + &join_params, sizeof(join_params)); + if (err < 0) { + brcmf_err("SET SSID error (%d)\n", err); + goto exit; + } + brcmf_dbg(TRACE, "AP mode configuration complete\n"); + } else { + err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le, + sizeof(ssid_le)); + if (err < 0) { + brcmf_err("setting ssid failed %d\n", err); + goto exit; + } + bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); + bss_enable.enable = cpu_to_le32(1); + err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, + sizeof(bss_enable)); + if (err < 0) { + brcmf_err("bss_enable config failed %d\n", err); + goto exit; + } + + brcmf_dbg(TRACE, "GO mode configuration complete\n"); + } clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); @@ -3802,10 +3851,41 @@ exit: return err; } +static s32 +brcmf_cfg80211_change_beacon(struct wiphy *wiphy, struct net_device *ndev, + struct cfg80211_beacon_data *info) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_if *ifp = netdev_priv(ndev); + s32 err; + + brcmf_dbg(TRACE, "Enter\n"); + + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { + brcmf_dbg(TRACE, "Role = AP\n"); + if (!test_bit(BRCMF_VIF_STATUS_AP_CREATED, + &ifp->vif->sme_state)) { + brcmf_err("AP was not yet created\n"); + return -EPERM; + } + } else { + brcmf_dbg(TRACE, "Role = P2P GO\n"); + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + ndev = ifp->ndev; + } + } + + err = brcmf_config_ap_mgmt_ie(ifp->vif, info); + + return err; +} + static int brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, u8 *mac) { + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_scb_val_le scbval; struct brcmf_if *ifp = netdev_priv(ndev); s32 err; @@ -3815,6 +3895,8 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(TRACE, "Enter %pM\n", mac); + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; if (!check_vif_up(ifp->vif)) return -EIO; @@ -3824,7 +3906,12 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, &scbval, sizeof(scbval)); if (err) brcmf_err("SCB_DEAUTHENTICATE_FOR_REASON failed %d\n", err); - + /* + * Wait for the deauth event to come, supplicant will do the + * delete iface immediately and we will have problem in sending + * deauth frame if we delete the bss in firmware + */ + brcmf_delay(400); brcmf_dbg(TRACE, "Exit\n"); return err; } @@ -3857,6 +3944,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); const struct ieee80211_mgmt *mgmt; + struct brcmf_if *ifp; struct brcmf_cfg80211_vif *vif; s32 err = 0; s32 ie_offset; @@ -3868,41 +3956,41 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, mgmt = (const struct ieee80211_mgmt *)buf; - if (ieee80211_is_mgmt(mgmt->frame_control)) { - if (ieee80211_is_probe_resp(mgmt->frame_control)) { - /* Right now the only reason to get a probe response */ - /* is for p2p listen response from wpa_supplicant. */ - /* Unfortunately the wpa_supplicant sends it on the */ - /* primary ndev, while dongle wants it on the p2p */ - /* vif. Since this is only reason for a probe */ - /* response to be sent, the vif is taken from cfg. */ - /* If ever desired to send proberesp for non p2p */ - /* response then data should be checked for */ - /* "DIRECT-". Note in future supplicant will take */ - /* dedicated p2p wdev to do this and then this 'hack'*/ - /* is not needed anymore. */ - ie_offset = DOT11_MGMT_HDR_LEN + - DOT11_BCN_PRB_FIXED_LEN; - ie_len = len - ie_offset; + if (!ieee80211_is_mgmt(mgmt->frame_control)) { + brcmf_err("Driver only allows MGMT packet type\n"); + return -EPERM; + } + if (ieee80211_is_probe_resp(mgmt->frame_control)) { + /* Right now the only reason to get a probe response */ + /* is for p2p listen response or for p2p GO from */ + /* wpa_supplicant. Unfortunately the probe is send */ + /* on primary ndev, while dongle wants it on the p2p */ + /* vif. Since this is only reason for a probe */ + /* response to be sent, the vif is taken from cfg. */ + /* If ever desired to send proberesp for non p2p */ + /* response then data should be checked for */ + /* "DIRECT-". Note in future supplicant will take */ + /* dedicated p2p wdev to do this and then this 'hack'*/ + /* is not needed anymore. */ + ie_offset = DOT11_MGMT_HDR_LEN + + DOT11_BCN_PRB_FIXED_LEN; + ie_len = len - ie_offset; + ifp = netdev_priv(wdev->netdev); + vif = ifp->vif; + if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - if (vif == NULL) { - brcmf_err("No p2p device available for probe response\n"); - err = -ENODEV; - goto exit; - } - err = brcmf_vif_set_mgmt_ie(vif, - BRCMF_VNDR_IE_PRBRSP_FLAG, - &buf[ie_offset], - ie_len); - cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, - GFP_KERNEL); - goto exit; - } + err = brcmf_vif_set_mgmt_ie(vif, + BRCMF_VNDR_IE_PRBRSP_FLAG, + &buf[ie_offset], + ie_len); + cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, + GFP_KERNEL); + } else { + brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); + brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len); } - brcmf_dbg(TRACE, "Unhandled, is_mgmt %d, fc=%04x!!!!!\n", - ieee80211_is_mgmt(mgmt->frame_control), mgmt->frame_control); -exit: + return err; } @@ -3946,8 +4034,8 @@ static s32 brcmf_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, "Enter: event %d reason %d\n", e->event_code, e->reason); /* Firmware sends us two proberesponses for each idx one. At the */ - /* moment only bsscfgidx 0 is passed up to supplicant */ - if (e->bsscfgidx) + /* moment anything but bsscfgidx 0 is passed up to supplicant */ + if (e->bsscfgidx == 0) return 0; /* Check if wpa_supplicant has registered for this frame */ @@ -3999,6 +4087,7 @@ static struct cfg80211_ops wl_cfg80211_ops = { .flush_pmksa = brcmf_cfg80211_flush_pmksa, .start_ap = brcmf_cfg80211_start_ap, .stop_ap = brcmf_cfg80211_stop_ap, + .change_beacon = brcmf_cfg80211_change_beacon, .del_station = brcmf_cfg80211_del_station, .sched_scan_start = brcmf_cfg80211_sched_scan_start, .sched_scan_stop = brcmf_cfg80211_sched_scan_stop, @@ -4727,7 +4816,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_err("Failed to init iwm_priv (%d)\n", err); goto cfg80211_attach_out; } - brcmf_p2p_attach(cfg); + brcmf_p2p_attach(cfg, vif); ifp->vif = vif; return cfg; -- cgit v0.10.2 From e6da3400b34a063119b911b268d168441a1b80e9 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:48 +0100 Subject: brcmfmac: Add handling of receiving P2P action frames. Once wpa_supplicant has registered for P2P action frames all received action frames for the device are passed up to cfg80211. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index d5f9711..e5b1fb9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -48,6 +48,38 @@ #define BRCMF_SCB_TIMEOUT_VALUE 20 +#define P2P_VER 9 /* P2P version: 9=WiFi P2P v1.0 */ +#define P2P_PUB_AF_CATEGORY 0x04 +#define P2P_PUB_AF_ACTION 0x09 +#define P2P_AF_CATEGORY 0x7f +#define P2P_OUI "\x50\x6F\x9A" /* P2P OUI */ +#define P2P_OUI_LEN 3 /* P2P OUI length */ + +/* WiFi P2P Public Action Frame OUI Subtypes */ +#define P2P_PAF_GON_REQ 0 /* Group Owner Negotiation Req */ +#define P2P_PAF_GON_RSP 1 /* Group Owner Negotiation Rsp */ +#define P2P_PAF_GON_CONF 2 /* Group Owner Negotiation Confirm */ +#define P2P_PAF_INVITE_REQ 3 /* P2P Invitation Request */ +#define P2P_PAF_INVITE_RSP 4 /* P2P Invitation Response */ +#define P2P_PAF_DEVDIS_REQ 5 /* Device Discoverability Request */ +#define P2P_PAF_DEVDIS_RSP 6 /* Device Discoverability Response */ +#define P2P_PAF_PROVDIS_REQ 7 /* Provision Discovery Request */ +#define P2P_PAF_PROVDIS_RSP 8 /* Provision Discovery Response */ +#define P2P_PAF_SUBTYPE_INVALID 255 /* Invalid Subtype */ + +/* WiFi P2P Action Frame OUI Subtypes */ +#define P2P_AF_NOTICE_OF_ABSENCE 0 /* Notice of Absence */ +#define P2P_AF_PRESENCE_REQ 1 /* P2P Presence Request */ +#define P2P_AF_PRESENCE_RSP 2 /* P2P Presence Response */ +#define P2P_AF_GO_DISC_REQ 3 /* GO Discoverability Request */ + +/* P2P Service Discovery related */ +#define P2PSD_ACTION_CATEGORY 0x04 /* Public action frame */ +#define P2PSD_ACTION_ID_GAS_IREQ 0x0a /* GAS Initial Request AF */ +#define P2PSD_ACTION_ID_GAS_IRESP 0x0b /* GAS Initial Response AF */ +#define P2PSD_ACTION_ID_GAS_CREQ 0x0c /* GAS Comback Request AF */ +#define P2PSD_ACTION_ID_GAS_CRESP 0x0d /* GAS Comback Response AF */ + /** * struct brcmf_p2p_disc_st_le - set discovery state in firmware. * @@ -92,6 +124,261 @@ struct brcmf_p2p_scan_le { }; /** + * struct brcmf_p2p_pub_act_frame - WiFi P2P Public Action Frame + * + * @category: P2P_PUB_AF_CATEGORY + * @action: P2P_PUB_AF_ACTION + * @oui[3]: P2P_OUI + * @oui_type: OUI type - P2P_VER + * @subtype: OUI subtype - P2P_TYPE_* + * @dialog_token: nonzero, identifies req/rsp transaction + * @elts[1]: Variable length information elements. + */ +struct brcmf_p2p_pub_act_frame { + u8 category; + u8 action; + u8 oui[3]; + u8 oui_type; + u8 subtype; + u8 dialog_token; + u8 elts[1]; +}; + +/** + * struct brcmf_p2p_action_frame - WiFi P2P Action Frame + * + * @category: P2P_AF_CATEGORY + * @OUI[3]: OUI - P2P_OUI + * @type: OUI Type - P2P_VER + * @subtype: OUI Subtype - P2P_AF_* + * @dialog_token: nonzero, identifies req/resp tranaction + * @elts[1]: Variable length information elements. + */ +struct brcmf_p2p_action_frame { + u8 category; + u8 oui[3]; + u8 type; + u8 subtype; + u8 dialog_token; + u8 elts[1]; +}; + +/** + * struct brcmf_p2psd_gas_pub_act_frame - Wi-Fi GAS Public Action Frame + * + * @category: 0x04 Public Action Frame + * @action: 0x6c Advertisement Protocol + * @dialog_token: nonzero, identifies req/rsp transaction + * @query_data[1]: Query Data. SD gas ireq SD gas iresp + */ +struct brcmf_p2psd_gas_pub_act_frame { + u8 category; + u8 action; + u8 dialog_token; + u8 query_data[1]; +}; + + +/** + * brcmf_p2p_is_pub_action() - true if p2p public type frame. + * + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Determine if action frame is p2p public action type + */ +static bool brcmf_p2p_is_pub_action(void *frame, u32 frame_len) +{ + struct brcmf_p2p_pub_act_frame *pact_frm; + + if (frame == NULL) + return false; + + pact_frm = (struct brcmf_p2p_pub_act_frame *)frame; + if (frame_len < sizeof(struct brcmf_p2p_pub_act_frame) - 1) + return false; + + if (pact_frm->category == P2P_PUB_AF_CATEGORY && + pact_frm->action == P2P_PUB_AF_ACTION && + pact_frm->oui_type == P2P_VER && + memcmp(pact_frm->oui, P2P_OUI, P2P_OUI_LEN) == 0) + return true; + + return false; +} + +/** + * brcmf_p2p_is_p2p_action() - true if p2p action type frame. + * + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Determine if action frame is p2p action type + */ +static bool brcmf_p2p_is_p2p_action(void *frame, u32 frame_len) +{ + struct brcmf_p2p_action_frame *act_frm; + + if (frame == NULL) + return false; + + act_frm = (struct brcmf_p2p_action_frame *)frame; + if (frame_len < sizeof(struct brcmf_p2p_action_frame) - 1) + return false; + + if (act_frm->category == P2P_AF_CATEGORY && + act_frm->type == P2P_VER && + memcmp(act_frm->oui, P2P_OUI, P2P_OUI_LEN) == 0) + return true; + + return false; +} + +/** + * brcmf_p2p_is_gas_action() - true if p2p gas action type frame. + * + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Determine if action frame is p2p gas action type + */ +static bool brcmf_p2p_is_gas_action(void *frame, u32 frame_len) +{ + struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; + + if (frame == NULL) + return false; + + sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; + if (frame_len < sizeof(struct brcmf_p2psd_gas_pub_act_frame) - 1) + return false; + + if (sd_act_frm->category != P2PSD_ACTION_CATEGORY) + return false; + + if (sd_act_frm->action == P2PSD_ACTION_ID_GAS_IREQ || + sd_act_frm->action == P2PSD_ACTION_ID_GAS_IRESP || + sd_act_frm->action == P2PSD_ACTION_ID_GAS_CREQ || + sd_act_frm->action == P2PSD_ACTION_ID_GAS_CRESP) + return true; + + return false; +} + +/** + * brcmf_p2p_print_actframe() - debug print routine. + * + * @tx: Received or to be transmitted + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Print information about the p2p action frame + */ +static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) +{ + struct brcmf_p2p_pub_act_frame *pact_frm; + struct brcmf_p2p_action_frame *act_frm; + struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; + + if (!frame || frame_len <= 2) + return; + + if (brcmf_p2p_is_pub_action(frame, frame_len)) { + pact_frm = (struct brcmf_p2p_pub_act_frame *)frame; + switch (pact_frm->subtype) { + case P2P_PAF_GON_REQ: + brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Req Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_GON_RSP: + brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Rsp Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_GON_CONF: + brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Confirm Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_INVITE_REQ: + brcmf_dbg(TRACE, "%s P2P Invitation Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_INVITE_RSP: + brcmf_dbg(TRACE, "%s P2P Invitation Response Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_DEVDIS_REQ: + brcmf_dbg(TRACE, "%s P2P Device Discoverability Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_DEVDIS_RSP: + brcmf_dbg(TRACE, "%s P2P Device Discoverability Response Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_PROVDIS_REQ: + brcmf_dbg(TRACE, "%s P2P Provision Discovery Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_PROVDIS_RSP: + brcmf_dbg(TRACE, "%s P2P Provision Discovery Response Frame\n", + (tx) ? "TX" : "RX"); + break; + default: + brcmf_dbg(TRACE, "%s Unknown P2P Public Action Frame\n", + (tx) ? "TX" : "RX"); + break; + } + } else if (brcmf_p2p_is_p2p_action(frame, frame_len)) { + act_frm = (struct brcmf_p2p_action_frame *)frame; + switch (act_frm->subtype) { + case P2P_AF_NOTICE_OF_ABSENCE: + brcmf_dbg(TRACE, "%s P2P Notice of Absence Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_AF_PRESENCE_REQ: + brcmf_dbg(TRACE, "%s P2P Presence Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_AF_PRESENCE_RSP: + brcmf_dbg(TRACE, "%s P2P Presence Response Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_AF_GO_DISC_REQ: + brcmf_dbg(TRACE, "%s P2P Discoverability Request Frame\n", + (tx) ? "TX" : "RX"); + break; + default: + brcmf_dbg(TRACE, "%s Unknown P2P Action Frame\n", + (tx) ? "TX" : "RX"); + } + + } else if (brcmf_p2p_is_gas_action(frame, frame_len)) { + sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; + switch (sd_act_frm->action) { + case P2PSD_ACTION_ID_GAS_IREQ: + brcmf_dbg(TRACE, "%s P2P GAS Initial Request\n", + (tx) ? "TX" : "RX"); + break; + case P2PSD_ACTION_ID_GAS_IRESP: + brcmf_dbg(TRACE, "%s P2P GAS Initial Response\n", + (tx) ? "TX" : "RX"); + break; + case P2PSD_ACTION_ID_GAS_CREQ: + brcmf_dbg(TRACE, "%s P2P GAS Comback Request\n", + (tx) ? "TX" : "RX"); + break; + case P2PSD_ACTION_ID_GAS_CRESP: + brcmf_dbg(TRACE, "%s P2P GAS Comback Response\n", + (tx) ? "TX" : "RX"); + break; + default: + brcmf_dbg(TRACE, "%s Unknown P2P GAS Frame\n", + (tx) ? "TX" : "RX"); + break; + } + } +} + +/** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * * @p2p: P2P specific data. @@ -687,6 +974,64 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) /** + * brcmf_p2p_notify_action_frame_rx() - received action frame. + * + * @ifp: interfac control. + * @e: event message. Not used, to make it usable for fweh event dispatcher. + * @data: payload of message, containing action frame data. + * + */ +int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct wireless_dev *wdev; + u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); + struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u16 chanspec = be16_to_cpu(rxframe->chanspec); + struct ieee80211_mgmt *mgmt_frame; + s32 err; + s32 freq; + u16 mgmt_type; + + /* Check if wpa_supplicant has registered for this frame */ + brcmf_dbg(INFO, "ifp->vif->mgmt_rx_reg %04x\n", ifp->vif->mgmt_rx_reg); + mgmt_type = (IEEE80211_STYPE_ACTION & IEEE80211_FCTL_STYPE) >> 4; + if ((ifp->vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) + return 0; + + brcmf_p2p_print_actframe(false, (u8 *)(rxframe + 1), mgmt_frame_len); + + mgmt_frame = kzalloc(offsetof(struct ieee80211_mgmt, u) + + mgmt_frame_len, GFP_KERNEL); + if (!mgmt_frame) { + brcmf_err("No memory available for action frame\n"); + return -ENOMEM; + } + memcpy(mgmt_frame->da, ifp->mac_addr, ETH_ALEN); + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, + ETH_ALEN); + if (err < 0) + brcmf_err("BRCMF_C_GET_BSSID error %d\n", err); + memcpy(mgmt_frame->sa, e->addr, ETH_ALEN); + mgmt_frame->frame_control = cpu_to_le16(IEEE80211_STYPE_ACTION); + memcpy(&mgmt_frame->u, (u8 *)(rxframe + 1), mgmt_frame_len); + mgmt_frame_len += offsetof(struct ieee80211_mgmt, u); + + freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), + CHSPEC_IS2G(chanspec) ? + IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ); + wdev = ifp->ndev->ieee80211_ptr; + cfg80211_rx_mgmt(wdev, freq, 0, (u8 *)mgmt_frame, mgmt_frame_len, + GFP_ATOMIC); + + kfree(mgmt_frame); + return 0; +} + + +/** * brcmf_p2p_attach() - attach for P2P. * * @cfg: driver private data for cfg80211 interface. diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 4c1819c..d247946 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -123,5 +123,8 @@ int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data); void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp); +int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c94d536..3914beb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4701,6 +4701,8 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_notify_rx_mgmt_p2p_probereq); brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, brcmf_p2p_notify_listen_complete); + brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, + brcmf_p2p_notify_action_frame_rx); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) -- cgit v0.10.2 From 18e2f61db3b708e0a22ccc403cb6ab2203d6faab Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:49 +0100 Subject: brcmfmac: P2P action frame tx. With this patch it is possible to send action frames. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 2c4ca59..0f2c83b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -20,6 +20,10 @@ #include + +#define BRCMF_FIL_ACTION_FRAME_SIZE 1800 + + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, BRCMF_FIL_P2P_IF_GO, @@ -39,6 +43,21 @@ struct brcmf_fil_chan_info_le { __le32 scan_channel; }; +struct brcmf_fil_action_frame_le { + u8 da[ETH_ALEN]; + __le16 len; + __le32 packet_id; + u8 data[BRCMF_FIL_ACTION_FRAME_SIZE]; +}; + +struct brcmf_fil_af_params_le { + __le32 channel; + __le32 dwell_time; + u8 bssid[ETH_ALEN]; + u8 pad[2]; + struct brcmf_fil_action_frame_le action_frame; +}; + struct brcmf_fil_bss_enable_le { __le32 bsscfg_idx; __le32 enable; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index e5b1fb9..0c42910 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -55,6 +55,21 @@ #define P2P_OUI "\x50\x6F\x9A" /* P2P OUI */ #define P2P_OUI_LEN 3 /* P2P OUI length */ +/* Action Frame Constants */ +#define DOT11_ACTION_HDR_LEN 2 /* action frame category + action */ +#define DOT11_ACTION_CAT_OFF 0 /* category offset */ +#define DOT11_ACTION_ACT_OFF 1 /* action offset */ + +#define P2P_AF_DWELL_TIME 200 +#define P2P_AF_MIN_DWELL_TIME 100 +#define P2P_AF_MED_DWELL_TIME 400 +#define P2P_AF_LONG_DWELL_TIME 1000 +#define P2P_AF_TX_MAX_RETRY 5 +#define P2P_AF_MAX_WAIT_TIME 2000 +#define P2P_INVALID_CHANNEL -1 +#define P2P_CHANNEL_SYNC_RETRY 5 +#define P2P_AF_FRM_SCAN_MAX_WAIT 1500 + /* WiFi P2P Public Action Frame OUI Subtypes */ #define P2P_PAF_GON_REQ 0 /* Group Owner Negotiation Req */ #define P2P_PAF_GON_RSP 1 /* Group Owner Negotiation Rsp */ @@ -178,6 +193,17 @@ struct brcmf_p2psd_gas_pub_act_frame { u8 query_data[1]; }; +/** + * struct brcmf_config_af_params - Action Frame Parameters for tx. + * + * @max_tx_retry: max tx retry count if tx no ack. + * @mpc_onoff: To make sure to send successfully action frame, we have to + * turn off mpc 0: off, 1: on, (-1): do nothing + */ +struct brcmf_config_af_params { + s32 max_tx_retry; + s32 mpc_onoff; +}; /** * brcmf_p2p_is_pub_action() - true if p2p public type frame. @@ -590,8 +616,6 @@ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) * brcmf_p2p_enable_discovery() - initialize and configure discovery. * * @p2p: P2P specific data. - * @ie: buffer containing information elements. - * @ie_len: length of @ie buffer. * * Initializes the discovery device and configure the virtual interface. */ @@ -731,7 +755,7 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, /* Override scan params to find a peer for a connection */ if (num_chans == 1) { active = WL_SCAN_CONNECT_DWELL_TIME_MS; - /* XXX WAR to sync with presence period of VSDB GO. + /* WAR to sync with presence period of VSDB GO. * send probe request more frequently */ nprobes = active / WL_SCAN_JOIN_PROBE_INTERVAL_MS; @@ -1032,6 +1056,269 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, /** + * brcmf_p2p_notify_action_tx_complete() - transmit action frame complete + * + * @ifp: interfac control. + * @e: event message. Not used, to make it usable for fweh event dispatcher. + * @data: not used. + * + */ +int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + + brcmf_dbg(INFO, "Enter: status %d\n", e->status); + + if (e->status == BRCMF_E_STATUS_SUCCESS) + set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); + else + set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + /* for now complete the receiver process here !! */ + complete(&p2p->send_af_done); + + return 0; +} + + +/** + * brcmf_p2p_tx_action_frame() - send action frame over fil. + * + * @p2p: p2p info struct for vif. + * @af_params: action frame data/info. + * + * Send an action frame immediately without doing channel synchronization. + * + * This function waits for a completion event before returning. + * The WLC_E_ACTION_FRAME_COMPLETE event will be received when the action + * frame is transmitted. + */ +static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, + struct brcmf_fil_af_params_le *af_params) +{ + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + s32 timeout = 0; + + brcmf_dbg(TRACE, "Enter\n"); + + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + err = brcmf_fil_bsscfg_data_set(vif->ifp, "actframe", af_params, + sizeof(*af_params)); + if (err) { + brcmf_err(" sending action frame has failed\n"); + goto exit; + } + + timeout = wait_for_completion_timeout(&p2p->send_af_done, + msecs_to_jiffies(P2P_AF_MAX_WAIT_TIME)); + + if (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status)) { + brcmf_dbg(TRACE, "TX action frame operation is success\n"); + } else { + err = -EIO; + brcmf_dbg(TRACE, "TX action frame operation has failed\n"); + } + /* clear status bit for action tx */ + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + +exit: + return err; +} + + +/** + * brcmf_p2p_pub_af_tx() - public action frame tx routine. + * + * @cfg: driver private data for cfg80211 interface. + * @af_params: action frame data/info. + * @config_af_params: configuration data for action frame. + * + * routine which transmits ation frame public type. + */ +static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, + struct brcmf_fil_af_params_le *af_params, + struct brcmf_config_af_params *config_af_params) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_fil_action_frame_le *action_frame; + struct brcmf_p2p_pub_act_frame *act_frm; + s32 err = 0; + + action_frame = &af_params->action_frame; + act_frm = (struct brcmf_p2p_pub_act_frame *)(action_frame->data); + + switch (act_frm->subtype) { + case P2P_PAF_GON_REQ: + brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status set\n"); + set_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + config_af_params->mpc_onoff = 0; + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time to wait for RESP frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_GON_RSP: + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time to wait for CONF frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_GON_CONF: + /* If we reached till GO Neg confirmation reset the filter */ + brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status cleared\n"); + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + /* turn on mpc again if go nego is done */ + config_af_params->mpc_onoff = 1; + /* minimize dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + break; + case P2P_PAF_INVITE_REQ: + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_INVITE_RSP: + /* minimize dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + break; + case P2P_PAF_DEVDIS_REQ: + p2p->next_af_subtype = act_frm->subtype + 1; + /* maximize dwell time to wait for RESP frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_LONG_DWELL_TIME); + break; + case P2P_PAF_DEVDIS_RSP: + /* minimize dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + break; + case P2P_PAF_PROVDIS_REQ: + config_af_params->mpc_onoff = 0; + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time to wait for RESP frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_PROVDIS_RSP: + /* wpa_supplicant send go nego req right after prov disc */ + p2p->next_af_subtype = P2P_PAF_GON_REQ; + /* increase dwell time to MED level */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + default: + brcmf_err("Unknown p2p pub act frame subtype: %d\n", + act_frm->subtype); + err = -EINVAL; + } + return err; +} + +/** + * brcmf_p2p_send_action_frame() - send action frame . + * + * @cfg: driver private data for cfg80211 interface. + * @ndev: net device to transmit on. + * @af_params: configuration data for action frame. + */ +bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct brcmf_fil_af_params_le *af_params) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_fil_action_frame_le *action_frame; + struct brcmf_config_af_params config_af_params; + u16 action_frame_len; + bool ack = false; + u8 category; + u8 action; + s32 tx_retry; + + action_frame = &af_params->action_frame; + action_frame_len = le16_to_cpu(action_frame->len); + + brcmf_p2p_print_actframe(true, action_frame->data, action_frame_len); + + /* Add the default dwell time. Dwell time to stay off-channel */ + /* to wait for a response action frame after transmitting an */ + /* GO Negotiation action frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_DWELL_TIME); + + category = action_frame->data[DOT11_ACTION_CAT_OFF]; + action = action_frame->data[DOT11_ACTION_ACT_OFF]; + + /* initialize variables */ + p2p->next_af_subtype = P2P_PAF_SUBTYPE_INVALID; + + /* config parameters */ + config_af_params.max_tx_retry = P2P_AF_TX_MAX_RETRY; + config_af_params.mpc_onoff = -1; + + if (brcmf_p2p_is_pub_action(action_frame->data, action_frame_len)) { + /* p2p public action frame process */ + if (brcmf_p2p_pub_af_tx(cfg, af_params, &config_af_params)) { + /* Just send unknown subtype frame with */ + /* default parameters. */ + brcmf_err("P2P Public action frame, unknown subtype.\n"); + } + } else if (brcmf_p2p_is_gas_action(action_frame->data, + action_frame_len)) { + /* service discovery process */ + if (action == P2PSD_ACTION_ID_GAS_IREQ || + action == P2PSD_ACTION_ID_GAS_CREQ) { + /* save next af suptype to cancel */ + /* remaining dwell time */ + p2p->next_af_subtype = action + 1; + + af_params->dwell_time = + cpu_to_le32(P2P_AF_MED_DWELL_TIME); + } else if (action == P2PSD_ACTION_ID_GAS_IRESP || + action == P2PSD_ACTION_ID_GAS_CRESP) { + /* configure service discovery response frame */ + af_params->dwell_time = + cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + } else { + brcmf_err("Unknown action type: %d\n", action); + goto exit; + } + } else if (brcmf_p2p_is_p2p_action(action_frame->data, + action_frame_len)) { + /* do not configure anything. it will be */ + /* sent with a default configuration */ + } else { + brcmf_err("Unknown Frame: category 0x%x, action 0x%x\n", + category, action); + return false; + } + + /* if scan is ongoing, abort current scan. */ + if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) + brcmf_abort_scanning(cfg); + + /* To make sure to send successfully action frame, turn off mpc */ + if (config_af_params.mpc_onoff == 0) + brcmf_set_mpc(ndev, 0); + + /* if failed, retry it. tx_retry_max value is configure by .... */ + tx_retry = 0; + while ((ack == false) && (tx_retry < config_af_params.max_tx_retry)) { + ack = !brcmf_p2p_tx_action_frame(p2p, af_params); + tx_retry++; + } + if (ack == false) + brcmf_err("Failed to send Action Frame(retry %d)\n", tx_retry); + +exit: + /* if all done, turn mpc on again */ + if (config_af_params.mpc_onoff == 1) + brcmf_set_mpc(ndev, 1); + + return ack; +} + + +/** * brcmf_p2p_attach() - attach for P2P. * * @cfg: driver private data for cfg80211 interface. @@ -1047,6 +1334,7 @@ void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = vif; brcmf_p2p_generate_bss_mac(p2p); brcmf_p2p_set_firmware(p2p); + init_completion(&p2p->send_af_done); } /** diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index d247946..0610dcf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -89,6 +89,8 @@ enum brcmf_p2p_status { * @ssid: ssid for P2P GO. * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. * @remain_on_channel: contains copy of struct used by cfg80211. + * @next_af_subtype: expected action frame subtype. + * @send_af_done: indication that action frame tx is complete. */ struct brcmf_p2p_info { struct brcmf_cfg80211_info *cfg; @@ -100,6 +102,8 @@ struct brcmf_p2p_info { struct brcmf_ssid ssid; u8 listen_channel; struct ieee80211_channel remain_on_channel; + u8 next_af_subtype; + struct completion send_af_done; }; void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, @@ -126,5 +130,11 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp); int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data); +int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); +bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct brcmf_fil_af_params_le *af_params); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 3914beb..7ae84a0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2494,7 +2494,7 @@ update_bss_info_out: return err; } -static void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) +void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) { struct escan_info *escan = &cfg->escan_info; @@ -3949,6 +3949,10 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, s32 err = 0; s32 ie_offset; s32 ie_len; + struct brcmf_fil_action_frame_le *action_frame; + struct brcmf_fil_af_params_le *af_params; + bool ack; + s32 chan_nr; brcmf_dbg(TRACE, "Enter\n"); @@ -3986,11 +3990,44 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, ie_len); cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, GFP_KERNEL); + } else if (ieee80211_is_action(mgmt->frame_control)) { + af_params = kzalloc(sizeof(*af_params), GFP_KERNEL); + if (af_params == NULL) { + brcmf_err("unable to allocate frame\n"); + err = -ENOMEM; + goto exit; + } + action_frame = &af_params->action_frame; + /* Add the packet Id */ + action_frame->packet_id = cpu_to_le32(*cookie); + /* Add BSSID */ + memcpy(&action_frame->da[0], &mgmt->da[0], ETH_ALEN); + memcpy(&af_params->bssid[0], &mgmt->bssid[0], ETH_ALEN); + /* Add the length exepted for 802.11 header */ + action_frame->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN); + /* Add the channel */ + chan_nr = ieee80211_frequency_to_channel(chan->center_freq); + af_params->channel = cpu_to_le32(chan_nr); + + memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], + le16_to_cpu(action_frame->len)); + + brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, freq=%d\n", + *cookie, le16_to_cpu(action_frame->len), + chan->center_freq); + + ack = brcmf_p2p_send_action_frame(cfg, wdev->netdev, + af_params); + + cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, ack, + GFP_KERNEL); + kfree(af_params); } else { brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len); } +exit: return err; } @@ -4703,6 +4740,8 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_p2p_notify_listen_complete); brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, brcmf_p2p_notify_action_frame_rx); + brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_COMPLETE, + brcmf_p2p_notify_action_tx_complete); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 2595712..a020555 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -498,5 +498,6 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, bool aborted, bool fw_abort); void brcmf_set_mpc(struct net_device *ndev, int mpc); +void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg); #endif /* _wl_cfg80211_h_ */ -- cgit v0.10.2 From f2058dde8c2be70cc22dbd8f718ab6c33cf6ea11 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:50 +0100 Subject: brcmfmac: Use real cookie value for p2p remain on channel. In some rare situations the wpa_supplicant can lock up on a remain on channel command. Use actual cookies for the remain on channel related commands and allow for additional remain on channel while still having one set. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 0c42910..aac054c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -913,6 +913,47 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, /** + * brcmf_p2p_discover_listen() - set firmware to discover listen state. + * + * @p2p: p2p device. + * @freq: center frequency for discover listen. + * #@duration: time in ms to stay on channel. + * + */ +static s32 +brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, + struct ieee80211_channel *channel, u32 duration) +{ + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + u16 chanspec; + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (!vif) { + brcmf_err("Discovery is not set, so we have nothing to do\n"); + err = -EPERM; + goto exit; + } + + if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status)) { + brcmf_err("Previous LISTEN is not completed yet\n"); + /* WAR: prevent cookie mismatch in wpa_supplicant return OK */ + goto exit; + } + + chanspec = channel_to_chanspec(channel); + err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, + chanspec, (u16)duration); + if (!err) { + set_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status); + p2p->remain_on_channel_cookie++; + } +exit: + return err; +} + + +/** * brcmf_p2p_remain_on_channel() - put device on channel and stay there. * * @wiphy: wiphy device. @@ -926,30 +967,21 @@ int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_p2p_info *p2p = &cfg->p2p; - struct brcmf_cfg80211_vif *vif; s32 err; - u16 chanspec; brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", ieee80211_frequency_to_channel(channel->center_freq), duration); - *cookie = 0; err = brcmf_p2p_enable_discovery(p2p); if (err) goto exit; - - chanspec = channel_to_chanspec(channel); - vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, - chanspec, (u16)duration); + err = brcmf_p2p_discover_listen(p2p, channel, duration); if (err) goto exit; - memcpy(&p2p->remain_on_channel, channel, - sizeof(p2p->remain_on_channel)); - - set_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, &p2p->status); + memcpy(&p2p->remain_on_channel, channel, sizeof(*channel)); + *cookie = p2p->remain_on_channel_cookie; exit: cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); @@ -973,9 +1005,10 @@ int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, struct brcmf_p2p_info *p2p = &cfg->p2p; brcmf_dbg(TRACE, "Enter\n"); - if (test_and_clear_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, + if (test_and_clear_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status)) - cfg80211_remain_on_channel_expired(&ifp->vif->wdev, 0, + cfg80211_remain_on_channel_expired(&ifp->vif->wdev, + p2p->remain_on_channel_cookie, &p2p->remain_on_channel, GFP_KERNEL); return 0; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 0610dcf..0594018 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -63,7 +63,7 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed. * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. - * @BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL: P2P listen, remaining on channel. + * @BRCMF_P2P_STATUS_DISCOVER_LISTEN: P2P listen, remaining on channel. */ enum brcmf_p2p_status { BRCMF_P2P_STATUS_IF_ADD = 0, @@ -74,7 +74,7 @@ enum brcmf_p2p_status { BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, BRCMF_P2P_STATUS_ACTION_TX_NOACK, BRCMF_P2P_STATUS_GO_NEG_PHASE, - BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL + BRCMF_P2P_STATUS_DISCOVER_LISTEN }; /** @@ -89,6 +89,7 @@ enum brcmf_p2p_status { * @ssid: ssid for P2P GO. * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. * @remain_on_channel: contains copy of struct used by cfg80211. + * @remain_on_channel_cookie: cookie counter for remain on channel cmd * @next_af_subtype: expected action frame subtype. * @send_af_done: indication that action frame tx is complete. */ @@ -102,6 +103,7 @@ struct brcmf_p2p_info { struct brcmf_ssid ssid; u8 listen_channel; struct ieee80211_channel remain_on_channel; + u32 remain_on_channel_cookie; u8 next_af_subtype; struct completion send_af_done; }; -- cgit v0.10.2 From 1ce3086ccd81793fd6affb350826a0c41dc3ef37 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:51 +0100 Subject: brcmfmac: change function signatures cfg80211 api change needs to be applied. this change will be squashed with introducing commit: commit 68751daec95b07a74b18aa22b2f9c196991dbe81 Author: Hante Meuleman Date: Mon Nov 26 12:21:27 2012 +0100 brcmfmac: add support for P2P listen mode. Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index aac054c..1c854f6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -982,9 +982,9 @@ int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, memcpy(&p2p->remain_on_channel, channel, sizeof(*channel)); *cookie = p2p->remain_on_channel_cookie; + cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); exit: - cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); return err; } -- cgit v0.10.2 From 2fde59d93f8ac5525213996b5e98efb8f4d8c88c Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:52 +0100 Subject: brcmfmac: Create p2p0 netdev via module variable. Add module variable with which a p2p0 netdev can be created. This netdev can be used by wpa-supplicant to configure and set up the p2p client/GO. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 451b89c..65176c6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -42,6 +42,12 @@ MODULE_LICENSE("Dual BSD/GPL"); int brcmf_msg_level; module_param(brcmf_msg_level, int, 0); +/* P2P0 enable */ +static int brcmf_p2p_enable; +#ifdef CONFIG_BRCMDBG +module_param_named(p2pon, brcmf_p2p_enable, int, 0); +MODULE_PARM_DESC(p2pon, "enable p2p management functionality"); +#endif char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx) { @@ -593,16 +599,6 @@ static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_set_rx_mode = brcmf_netdev_set_multicast_list }; -static const struct net_device_ops brcmf_netdev_ops_virt = { - .ndo_open = brcmf_cfg80211_up, - .ndo_stop = brcmf_cfg80211_down, - .ndo_get_stats = brcmf_netdev_get_stats, - .ndo_do_ioctl = brcmf_netdev_ioctl_entry, - .ndo_start_xmit = brcmf_netdev_start_xmit, - .ndo_set_mac_address = brcmf_netdev_set_mac_address, - .ndo_set_rx_mode = brcmf_netdev_set_multicast_list -}; - int brcmf_net_attach(struct brcmf_if *ifp) { struct brcmf_pub *drvr = ifp->drvr; @@ -613,10 +609,7 @@ int brcmf_net_attach(struct brcmf_if *ifp) ndev = ifp->ndev; /* set appropriate operations */ - if (!ifp->bssidx) - ndev->netdev_ops = &brcmf_netdev_ops_pri; - else - ndev->netdev_ops = &brcmf_netdev_ops_virt; + ndev->netdev_ops = &brcmf_netdev_ops_pri; ndev->hard_header_len = ETH_HLEN + drvr->hdrlen; ndev->ethtool_ops = &brcmf_ethtool_ops; @@ -627,6 +620,9 @@ int brcmf_net_attach(struct brcmf_if *ifp) /* set the mac address */ memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN); + INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); + INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); + if (register_netdev(ndev) != 0) { brcmf_err("couldn't register the net device\n"); goto fail; @@ -641,6 +637,69 @@ fail: return -EBADE; } +static int brcmf_net_p2p_open(struct net_device *ndev) +{ + brcmf_dbg(TRACE, "Enter\n"); + + return brcmf_cfg80211_up(ndev); +} + +static int brcmf_net_p2p_stop(struct net_device *ndev) +{ + brcmf_dbg(TRACE, "Enter\n"); + + return brcmf_cfg80211_down(ndev); +} + +static int brcmf_net_p2p_do_ioctl(struct net_device *ndev, + struct ifreq *ifr, int cmd) +{ + brcmf_dbg(TRACE, "Enter\n"); + return 0; +} + +static netdev_tx_t brcmf_net_p2p_start_xmit(struct sk_buff *skb, + struct net_device *ndev) +{ + if (skb) + dev_kfree_skb_any(skb); + + return NETDEV_TX_OK; +} + +static const struct net_device_ops brcmf_netdev_ops_p2p = { + .ndo_open = brcmf_net_p2p_open, + .ndo_stop = brcmf_net_p2p_stop, + .ndo_do_ioctl = brcmf_net_p2p_do_ioctl, + .ndo_start_xmit = brcmf_net_p2p_start_xmit +}; + +static int brcmf_net_p2p_attach(struct brcmf_if *ifp) +{ + struct net_device *ndev; + + brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, + ifp->mac_addr); + ndev = ifp->ndev; + + ndev->netdev_ops = &brcmf_netdev_ops_p2p; + + /* set the mac address */ + memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN); + + if (register_netdev(ndev) != 0) { + brcmf_err("couldn't register the p2p net device\n"); + goto fail; + } + + brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + + return 0; + +fail: + return -EBADE; +} + struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr) { @@ -682,8 +741,6 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, ifp->ifidx = ifidx; ifp->bssidx = bssidx; - INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); - INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); init_waitqueue_head(&ifp->pend_8021x_wait); @@ -717,8 +774,10 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) netif_stop_queue(ifp->ndev); } - cancel_work_sync(&ifp->setmacaddr_work); - cancel_work_sync(&ifp->multicast_work); + if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { + cancel_work_sync(&ifp->setmacaddr_work); + cancel_work_sync(&ifp->multicast_work); + } unregister_netdev(ifp->ndev); drvr->iflist[bssidx] = NULL; @@ -776,6 +835,7 @@ int brcmf_bus_start(struct device *dev) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; struct brcmf_if *ifp; + struct brcmf_if *p2p_ifp; brcmf_dbg(TRACE, "\n"); @@ -791,6 +851,13 @@ int brcmf_bus_start(struct device *dev) if (IS_ERR(ifp)) return PTR_ERR(ifp); + if (brcmf_p2p_enable) + p2p_ifp = brcmf_add_if(drvr, 1, 0, "p2p%d", NULL); + else + p2p_ifp = NULL; + if (IS_ERR(p2p_ifp)) + p2p_ifp = NULL; + /* signal bus ready */ bus_if->state = BRCMF_BUS_DATA; @@ -817,8 +884,14 @@ fail: brcmf_cfg80211_detach(drvr->config); free_netdev(ifp->ndev); drvr->iflist[0] = NULL; + if (p2p_ifp) { + free_netdev(p2p_ifp->ndev); + drvr->iflist[1] = NULL; + } return ret; } + if ((brcmf_p2p_enable) && (p2p_ifp)) + brcmf_net_p2p_attach(p2p_ifp); return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 1c854f6..c04d596 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -407,22 +407,21 @@ static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * - * @p2p: P2P specific data. + * @ifp: ifp to use for iovars (primary). + * @p2p_mac: mac address to configure for p2p_da_override */ -static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) +static int brcmf_p2p_set_firmware(struct brcmf_if *ifp, u8 *p2p_mac) { - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - u8 null_eth_addr[] = { 0, 0, 0, 0, 0, 0 }; s32 ret = 0; - brcmf_fil_iovar_int_set(netdev_priv(ndev), "apsta", 1); + brcmf_fil_iovar_int_set(ifp, "apsta", 1); /* In case of COB type, firmware has default mac address * After Initializing firmware, we have to set current mac address to * firmware for P2P device address */ - ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "p2p_da_override", - null_eth_addr, sizeof(null_eth_addr)); + ret = brcmf_fil_iovar_data_set(ifp, "p2p_da_override", p2p_mac, + ETH_ALEN); if (ret) brcmf_err("failed to update device address ret %d\n", ret); @@ -440,11 +439,15 @@ static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) */ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p) { + struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + struct brcmf_if *p2p_ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp; + /* Generate the P2P Device Address. This consists of the device's * primary MAC address with the locally administered bit set. */ - memcpy(p2p->dev_addr, p2p->cfg->pub->mac, ETH_ALEN); + memcpy(p2p->dev_addr, pri_ifp->mac_addr, ETH_ALEN); p2p->dev_addr[0] |= 0x02; + memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); /* Generate the P2P Interface Address. If the discovery and connection * BSSCFGs need to simultaneously co-exist, then this address must be @@ -503,111 +506,25 @@ static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, } /** - * brcmf_p2p_init_discovery() - enable discovery in the firmware. - * - * @p2p: P2P specific data. - * - * Configures the firmware to allow P2P peer discovery. Creates the - * virtual interface and consequently the P2P device for it. - */ -static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p) -{ - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - struct brcmf_cfg80211_vif *vif; - struct brcmf_if *ifp; - struct p2p_bss *bss_dev; - s32 index; - s32 ret; - - brcmf_dbg(TRACE, "enter\n"); - - bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; - if (bss_dev->vif != NULL) { - brcmf_dbg(INFO, "do nothing, already initialized\n"); - return 0; - } - - /* Enable P2P Discovery in the firmware */ - ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 1); - if (ret < 0) { - brcmf_err("set discover error\n"); - return ret; - } - - /* obtain bsscfg index for P2P discovery */ - ret = brcmf_fil_iovar_int_get(netdev_priv(ndev), "p2p_dev", &index); - if (ret < 0) { - brcmf_err("retrieving discover bsscfg index failed\n"); - return ret; - } - - /* - * need brcmf_if for setting the discovery state. - */ - ifp = kzalloc(sizeof(*vif->ifp), GFP_KERNEL); - if (!ifp) { - brcmf_err("could not create discovery if\n"); - return -ENOMEM; - } - - /* set required fields */ - ifp->drvr = p2p->cfg->pub; - ifp->ifidx = 0; - ifp->bssidx = index; - - /* Set the initial discovery state to SCAN */ - ret = brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); - - if (ret != 0) { - brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); - (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); - kfree(ifp); - return ret; - } - - /* create a vif for it */ - vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE, false); - if (IS_ERR(vif)) { - brcmf_err("could not create discovery vif\n"); - kfree(ifp); - return PTR_ERR(vif); - } - - vif->ifp = ifp; - ifp->vif = vif; - bss_dev->vif = vif; - - return 0; -} - -/** * brcmf_p2p_deinit_discovery() - disable P2P device discovery. * * @p2p: P2P specific data. * - * Resets the discovery state and disables it in firmware. The virtual - * interface and P2P device are freed. + * Resets the discovery state and disables it in firmware. */ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) { - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - struct brcmf_if *ifp; - struct p2p_bss *bss_dev; - brcmf_dbg(TRACE, "enter\n"); + struct brcmf_cfg80211_vif *vif; - bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; - ifp = bss_dev->vif->ifp; + brcmf_dbg(TRACE, "enter\n"); /* Set the discovery state to SCAN */ - (void)brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + (void)brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0); /* Disable P2P discovery in the firmware */ - (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); - - /* remove discovery interface */ - brcmf_free_vif(bss_dev->vif); - bss_dev->vif = NULL; - kfree(ifp); + vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + (void)brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 0); return 0; } @@ -626,18 +543,30 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) brcmf_dbg(TRACE, "enter\n"); vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - if (vif) { - brcmf_dbg(INFO, "DISCOVERY init already done\n"); + if (!vif) { + brcmf_err("P2P config device not available\n"); + ret = -EPERM; goto exit; } - ret = brcmf_p2p_init_discovery(p2p); - if (ret < 0) { - brcmf_err("init discovery error %d\n", ret); + if (test_bit(BRCMF_P2P_STATUS_ENABLED, &p2p->status)) { + brcmf_dbg(INFO, "P2P config device already configured\n"); goto exit; } + /* Re-initialize P2P Discovery in the firmware */ + vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + ret = brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 1); + if (ret < 0) { + brcmf_err("set p2p_disc error\n"); + goto exit; + } vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + ret = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + if (ret < 0) { + brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); + goto exit; + } /* * Set wsec to any non-zero value in the discovery bsscfg @@ -646,9 +575,12 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) * initiate WPS with us if this bit is not set. */ ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED); - if (ret < 0) + if (ret < 0) { brcmf_err("wsec error %d\n", ret); + goto exit; + } + set_bit(BRCMF_P2P_STATUS_ENABLED, &p2p->status); exit: return ret; } @@ -1356,20 +1288,75 @@ exit: * * @cfg: driver private data for cfg80211 interface. */ -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif) +s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) { + struct brcmf_if *pri_ifp; + struct brcmf_if *p2p_ifp; + struct brcmf_cfg80211_vif *p2p_vif; struct brcmf_p2p_info *p2p; + struct brcmf_pub *drvr; + s32 bssidx; + s32 err = 0; p2p = &cfg->p2p; - p2p->cfg = cfg; - p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = vif; - brcmf_p2p_generate_bss_mac(p2p); - brcmf_p2p_set_firmware(p2p); - init_completion(&p2p->send_af_done); + + drvr = cfg->pub; + + pri_ifp = drvr->iflist[0]; + p2p_ifp = drvr->iflist[1]; + + p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; + + if (p2p_ifp) { + p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION, + false); + if (IS_ERR(p2p_vif)) { + brcmf_err("could not create discovery vif\n"); + err = -ENOMEM; + goto exit; + } + + p2p_vif->ifp = p2p_ifp; + p2p_ifp->vif = p2p_vif; + p2p_vif->wdev.netdev = p2p_ifp->ndev; + p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev; + SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy)); + + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; + + brcmf_p2p_generate_bss_mac(p2p); + brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); + + /* Initialize P2P Discovery in the firmware */ + err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); + if (err < 0) { + brcmf_err("set p2p_disc error\n"); + brcmf_free_vif(p2p_vif); + goto exit; + } + /* obtain bsscfg index for P2P discovery */ + err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); + if (err < 0) { + brcmf_err("retrieving discover bsscfg index failed\n"); + brcmf_free_vif(p2p_vif); + goto exit; + } + /* Verify that firmware uses same bssidx as driver !! */ + if (p2p_ifp->bssidx != bssidx) { + brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", + bssidx, p2p_ifp->bssidx); + brcmf_free_vif(p2p_vif); + goto exit; + } + + init_completion(&p2p->send_af_done); + } +exit: + return err; } + /** * brcmf_p2p_detach() - detach P2P. * @@ -1377,10 +1364,15 @@ void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, */ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) { - if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif != NULL) { - brcmf_p2p_cancel_remain_on_channel( - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp); + struct brcmf_cfg80211_vif *vif; + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif != NULL) { + brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); + /* remove discovery interface */ + brcmf_free_vif(vif); + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ memset(p2p, 0, sizeof(*p2p)); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 0594018..8fed9a3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -66,7 +66,8 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_DISCOVER_LISTEN: P2P listen, remaining on channel. */ enum brcmf_p2p_status { - BRCMF_P2P_STATUS_IF_ADD = 0, + BRCMF_P2P_STATUS_ENABLED, + BRCMF_P2P_STATUS_IF_ADD, BRCMF_P2P_STATUS_IF_DEL, BRCMF_P2P_STATUS_IF_DELETING, BRCMF_P2P_STATUS_IF_CHANGING, @@ -108,8 +109,7 @@ struct brcmf_p2p_info { struct completion send_af_done; }; -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif); +s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 7ae84a0..3011575 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4857,11 +4857,19 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_err("Failed to init iwm_priv (%d)\n", err); goto cfg80211_attach_out; } - brcmf_p2p_attach(cfg, vif); - ifp->vif = vif; + + err = brcmf_p2p_attach(cfg); + if (err) { + brcmf_err("P2P initilisation failed (%d)\n", err); + goto cfg80211_p2p_attach_out; + } + return cfg; +cfg80211_p2p_attach_out: + wl_deinit_priv(cfg); + cfg80211_attach_out: brcmf_free_vif(vif); wiphy_free(wiphy); -- cgit v0.10.2 From 426d0a562945f9e0391bf685940dfad01e1200dc Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:53 +0100 Subject: brcmfmac: Use role from wdev on AP commands and fix stop_ap. Use the stored role in wdev struct to determine AP/GO role. This simplifies code. Fix stop_ap for GO role. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 3011575..58b2437 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3655,7 +3655,6 @@ static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); s32 ie_offset; struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; @@ -3675,22 +3674,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, settings->ssid, settings->ssid_len, settings->auth_type, settings->inactivity_timeout); - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { - brcmf_dbg(TRACE, "Role = AP\n"); - dev_role = NL80211_IFTYPE_AP; - if (!test_bit(BRCMF_VIF_STATUS_AP_CREATING, - &ifp->vif->sme_state)) { - brcmf_err("Not in AP creation mode\n"); - return -EPERM; - } - } else { - brcmf_dbg(TRACE, "Role = P2P GO\n"); - dev_role = NL80211_IFTYPE_P2P_GO; - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { - ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ndev = ifp->ndev; - } - } + dev_role = ifp->vif->wdev.iftype; memset(&ssid_le, 0, sizeof(ssid_le)); if (settings->ssid == NULL || settings->ssid_len == 0) { @@ -3826,10 +3810,11 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); s32 err = -EPERM; + struct brcmf_fil_bss_enable_le bss_enable; brcmf_dbg(TRACE, "Enter\n"); - if (ifp->vif->mode == WL_MODE_AP) { + if (ifp->vif->wdev.iftype == NL80211_IFTYPE_AP) { /* Due to most likely deauths outstanding we sleep */ /* first to make sure they get processed by fw. */ msleep(400); @@ -3843,10 +3828,18 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) brcmf_err("BRCMF_C_UP error %d\n", err); goto exit; } - brcmf_set_mpc(ndev, 1); - clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); - clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); + } else { + bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); + bss_enable.enable = cpu_to_le32(0); + err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, + sizeof(bss_enable)); + if (err < 0) + brcmf_err("bss_enable config failed %d\n", err); } + brcmf_set_mpc(ndev, 1); + set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); + clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); + exit: return err; } @@ -3855,27 +3848,11 @@ static s32 brcmf_cfg80211_change_beacon(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_beacon_data *info) { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); s32 err; brcmf_dbg(TRACE, "Enter\n"); - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { - brcmf_dbg(TRACE, "Role = AP\n"); - if (!test_bit(BRCMF_VIF_STATUS_AP_CREATED, - &ifp->vif->sme_state)) { - brcmf_err("AP was not yet created\n"); - return -EPERM; - } - } else { - brcmf_dbg(TRACE, "Role = P2P GO\n"); - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { - ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ndev = ifp->ndev; - } - } - err = brcmf_config_ap_mgmt_ie(ifp->vif, info); return err; -- cgit v0.10.2 From 0a4cf487ffdc3a4e7b55e538cd05ef63539a9c20 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:54 +0100 Subject: brcmfmac: Put printing action frames code under debug flag. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index c04d596..9f87a85 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -300,6 +300,9 @@ static bool brcmf_p2p_is_gas_action(void *frame, u32 frame_len) * * Print information about the p2p action frame */ + +#ifdef DEBUG + static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) { struct brcmf_p2p_pub_act_frame *pact_frm; @@ -404,6 +407,14 @@ static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) } } +#else + +static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) +{ +} + +#endif + /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * -- cgit v0.10.2 From cdcef36b3fe27c24f8e2cc22d256bcde88018ea4 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:55 +0100 Subject: brcmfmac: Ignore E_ADD_IF for ifidx 0. All interfaces for ifidx is 0 are created ahead and therefor double registrations for not only bssidx 0, but ifidx 0 should be ignored in brcfm_add_if. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 65176c6..e61be4d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -716,7 +716,7 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, if (ifp) { brcmf_err("ERROR: netdev:%s already exists\n", ifp->ndev->name); - if (bssidx) { + if (ifidx) { netif_stop_queue(ifp->ndev); unregister_netdev(ifp->ndev); free_netdev(ifp->ndev); -- cgit v0.10.2 From 1bc7c654a946dca4890f6bf29d769a7ed25eb8b0 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:56 +0100 Subject: brcmfmac: Reject change vif for p2p if. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 58b2437..cba2f34 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -673,6 +673,18 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, infra = 0; break; case NL80211_IFTYPE_STATION: + /* Ignore change for p2p IF. Unclear why supplicant does this */ + if ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || + (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO)) { + brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); + /* WAR: It is unexpected to get a change of VIF for P2P + * IF, but it happens. The request can not be handled + * but returning EPERM causes a crash. Returning 0 + * without setting ieee80211_ptr->iftype causes trace + * (WARN_ON) but it works with wpa_supplicant + */ + return 0; + } vif->mode = WL_MODE_BSS; infra = 1; break; -- cgit v0.10.2 From dded3d532cbea8b96ae388b9bc173f1b2ec4d292 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:57 +0100 Subject: brcmfmac: Update netdev configuration in wiphy for p2p. Wiphy object holds information about possible netdev combinations which can be supported. This needs updating for p2p device. Also p2p device netdev has wrong 80211 iftype. Limit the change interface support to match the netdev configuration/combination possibilities. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 9f87a85..fd09074 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1320,7 +1320,7 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; if (p2p_ifp) { - p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION, + p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, false); if (IS_ERR(p2p_vif)) { brcmf_err("could not create discovery vif\n"); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index cba2f34..e7ef827 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4163,20 +4163,24 @@ static void brcmf_wiphy_pno_params(struct wiphy *wiphy) static const struct ieee80211_iface_limit brcmf_iface_limits[] = { { - .max = 1, + .max = 2, .types = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) }, { .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE) + }, + { + .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) }, }; static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { - .max_interfaces = BRCMF_IFACE_MAX_CNT - 1, + .max_interfaces = BRCMF_IFACE_MAX_CNT, .num_different_channels = 1, /* no multi-channel for now */ .n_limits = ARRAY_SIZE(brcmf_iface_limits), .limits = brcmf_iface_limits @@ -4225,7 +4229,8 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_DEVICE); wiphy->iface_combinations = brcmf_iface_combos; wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz; -- cgit v0.10.2 From 7ab6acd025cdca23485227d85d80cb747a71d1fc Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:58 +0100 Subject: brcmfmac: Remove sleep on del_station. Currently there is a sleep after disconnect on del_station. This timeout is not needed (anymore) and is causing problems with p2p setup, because remote side disconnects then supplicant will do del_station and while it waits the 400ms remote side will already reconnect and that is something supplicant cant handle. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index e7ef827..f283a7e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3895,12 +3895,7 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, &scbval, sizeof(scbval)); if (err) brcmf_err("SCB_DEAUTHENTICATE_FOR_REASON failed %d\n", err); - /* - * Wait for the deauth event to come, supplicant will do the - * delete iface immediately and we will have problem in sending - * deauth frame if we delete the bss in firmware - */ - brcmf_delay(400); + brcmf_dbg(TRACE, "Exit\n"); return err; } -- cgit v0.10.2 From 28c14f4a3b4639032c7cd35a7d8bdd2898b5fbf2 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:59 +0100 Subject: brcmfmac: Fix rtnl_lock lockup when registering netdev. When adding a virtual interface cfg80211 already has taken the rtnl_lock. So when the netdevice is being registered the register_netdevice should be used instead of register_netdev. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index c4a6083..ef6f23b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -585,7 +585,7 @@ extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, struct sk_buff *rxp); -extern int brcmf_net_attach(struct brcmf_if *ifp); +extern int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr); extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e61be4d..6e3846c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -599,10 +599,11 @@ static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_set_rx_mode = brcmf_netdev_set_multicast_list }; -int brcmf_net_attach(struct brcmf_if *ifp) +int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) { struct brcmf_pub *drvr = ifp->drvr; struct net_device *ndev; + s32 err; brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, ifp->mac_addr); @@ -623,7 +624,11 @@ int brcmf_net_attach(struct brcmf_if *ifp) INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); - if (register_netdev(ndev) != 0) { + if (rtnl_locked) + err = register_netdevice(ndev); + else + err = register_netdev(ndev); + if (err != 0) { brcmf_err("couldn't register the net device\n"); goto fail; } @@ -876,7 +881,7 @@ int brcmf_bus_start(struct device *dev) if (ret < 0) goto fail; - ret = brcmf_net_attach(ifp); + ret = brcmf_net_attach(ifp, false); fail: if (ret < 0) { brcmf_err("failed: %d\n", ret); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 1fd29b0..e9d6f91 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -200,7 +200,7 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - err = brcmf_net_attach(ifp); + err = brcmf_net_attach(ifp, false); } err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index f283a7e..6cdb578 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4668,7 +4668,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, /* waiting process need to set the netdev name */ wait_for_completion(&event->vif_complete); - return brcmf_net_attach(ifp); + return brcmf_net_attach(ifp, true); case BRCMF_E_IF_DEL: ifp->vif = NULL; -- cgit v0.10.2 From dae3a27359adc277ea3b399b8240ce348304289e Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:54:00 +0100 Subject: brcmfmac: Cleanup of unused defines. Remove some unused defines and comments. Also use same define for IE length. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 8fed9a3..9e0e962 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -20,12 +20,6 @@ struct brcmf_cfg80211_info; -/* vendor ies max buffer length for probe response or beacon */ -#define VNDR_IES_MAX_BUF_LEN 1400 -/* normal vendor ies buffer length */ -#define VNDR_IES_BUF_LEN 512 - -/* Structure to hold all saved P2P and WPS IEs for a BSSCFG */ /** * enum p2p_bss_type - different type of BSS configurations. * diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a020555..b886f22 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -172,7 +172,7 @@ enum brcmf_vif_status { * @beacon_ie_len: IE info length for beacon frame. */ struct vif_saved_ie { - u8 probe_req_ie[VNDR_IES_BUF_LEN]; + u8 probe_req_ie[IE_MAX_LEN]; u8 probe_res_ie[IE_MAX_LEN]; u8 beacon_ie[IE_MAX_LEN]; u8 assoc_req_ie[IE_MAX_LEN]; -- cgit v0.10.2 From 4b3a89de8a2e91bf873a0044fa62b2f5afb6693a Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:54:01 +0100 Subject: brcmfmac: Create netdev before returning from add_virtual_intf. Currently netdev gets created possibly after returning from add_virtual_intf. This is because add_if is handled asynch. This is wrong and netdev should be up before returning. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fd09074..84d6acd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1591,7 +1591,11 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, } strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); - brcmf_cfg80211_vif_complete(cfg); + err = brcmf_net_attach(ifp, true); + if (err) { + brcmf_err("Registering netdevice failed\n"); + goto fail; + } cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set(ifp, "roam_off", 1); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6cdb578..b5cc154 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4665,10 +4665,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); mutex_unlock(&event->vif_event_lock); wake_up(&event->vif_wq); - - /* waiting process need to set the netdev name */ - wait_for_completion(&event->vif_complete); - return brcmf_net_attach(ifp, true); + return 0; case BRCMF_E_IF_DEL: ifp->vif = NULL; @@ -4800,7 +4797,6 @@ static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) static void init_vif_event(struct brcmf_cfg80211_vif_event *event) { init_waitqueue_head(&event->vif_wq); - init_completion(&event->vif_complete); mutex_init(&event->vif_event_lock); } @@ -5154,7 +5150,3 @@ int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, vif_event_equals(event, action), timeout); } -void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *cfg) -{ - complete(&cfg->vif_event.vif_complete); -} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index b886f22..8b5d498 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -337,7 +337,6 @@ struct brcmf_pno_scanresults_le { struct brcmf_cfg80211_vif_event { wait_queue_head_t vif_wq; struct mutex vif_event_lock; - struct completion vif_complete; u8 action; struct brcmf_cfg80211_vif *vif; }; @@ -493,7 +492,6 @@ void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, u8 action, ulong timeout); -void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *info); s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, bool aborted, bool fw_abort); -- cgit v0.10.2 From 6eda4e2c54255cd26a58d2fcec73ec3bff7a515b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:54:02 +0100 Subject: brcmfmac: Add tx p2p off-channel support. With this patch off-channel action frames can be transmitted. This is needed for p2p when two devices need to find each other while using different social channels. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 84d6acd..4166e64 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -43,6 +43,9 @@ #define SOCIAL_CHAN_1 1 #define SOCIAL_CHAN_2 6 #define SOCIAL_CHAN_3 11 +#define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ + (channel == SOCIAL_CHAN_2) || \ + (channel == SOCIAL_CHAN_3)) #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 @@ -64,11 +67,12 @@ #define P2P_AF_MIN_DWELL_TIME 100 #define P2P_AF_MED_DWELL_TIME 400 #define P2P_AF_LONG_DWELL_TIME 1000 -#define P2P_AF_TX_MAX_RETRY 5 +#define P2P_AF_TX_MAX_RETRY 1 #define P2P_AF_MAX_WAIT_TIME 2000 #define P2P_INVALID_CHANNEL -1 #define P2P_CHANNEL_SYNC_RETRY 5 #define P2P_AF_FRM_SCAN_MAX_WAIT 1500 +#define P2P_DEFAULT_SLEEP_TIME_VSDB 200 /* WiFi P2P Public Action Frame OUI Subtypes */ #define P2P_PAF_GON_REQ 0 /* Group Owner Negotiation Req */ @@ -196,13 +200,15 @@ struct brcmf_p2psd_gas_pub_act_frame { /** * struct brcmf_config_af_params - Action Frame Parameters for tx. * - * @max_tx_retry: max tx retry count if tx no ack. * @mpc_onoff: To make sure to send successfully action frame, we have to * turn off mpc 0: off, 1: on, (-1): do nothing + * @search_channel: 1: search peer's channel to send af + * extra_listen: keep the dwell time to get af response frame. */ struct brcmf_config_af_params { - s32 max_tx_retry; s32 mpc_onoff; + bool search_channel; + bool extra_listen; }; /** @@ -415,6 +421,30 @@ static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) #endif + +/** + * brcmf_p2p_chnr_to_chspec() - convert channel number to chanspec. + * + * @channel: channel number + */ +static u16 brcmf_p2p_chnr_to_chspec(u16 channel) +{ + u16 chanspec; + + chanspec = channel & WL_CHANSPEC_CHAN_MASK; + + if (channel <= CH_MAX_2G_CHANNEL) + chanspec |= WL_CHANSPEC_BAND_2G; + else + chanspec |= WL_CHANSPEC_BAND_5G; + + chanspec |= WL_CHANSPEC_BW_20; + chanspec |= WL_CHANSPEC_CTL_SB_NONE; + + return chanspec; +} + + /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * @@ -811,6 +841,43 @@ exit: return err; } + +/** + * brcmf_p2p_find_listen_channel() - find listen channel in ie string. + * + * @ie: string of information elements. + * @ie_len: length of string. + * + * Scan ie for p2p ie and look for attribute 6 channel. If available determine + * channel and return it. + */ +static s32 brcmf_p2p_find_listen_channel(const u8 *ie, u32 ie_len) +{ + u8 channel_ie[5]; + s32 listen_channel; + s32 err; + + err = cfg80211_get_p2p_attr(ie, ie_len, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + channel_ie, sizeof(channel_ie)); + if (err < 0) + return err; + + /* listen channel subel length format: */ + /* 3(country) + 1(op. class) + 1(chan num) */ + listen_channel = (s32)channel_ie[3 + 1]; + + if (listen_channel == SOCIAL_CHAN_1 || + listen_channel == SOCIAL_CHAN_2 || + listen_channel == SOCIAL_CHAN_3) { + brcmf_dbg(INFO, "Found my Listen Channel %d\n", listen_channel); + return listen_channel; + } + + return -EPERM; +} + + /** * brcmf_p2p_scan_prep() - prepare scan based on request. * @@ -831,12 +898,13 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, if (brcmf_p2p_scan_is_p2p_request(request)) { /* find my listen channel */ - err = cfg80211_get_p2p_attr(request->ie, request->ie_len, - IEEE80211_P2P_ATTR_LISTEN_CHANNEL, - &p2p->listen_channel, 1); + err = brcmf_p2p_find_listen_channel(request->ie, + request->ie_len); if (err < 0) return err; + p2p->afx_hdl.my_listen_chan = err; + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); @@ -859,13 +927,12 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, * brcmf_p2p_discover_listen() - set firmware to discover listen state. * * @p2p: p2p device. - * @freq: center frequency for discover listen. - * #@duration: time in ms to stay on channel. + * @channel: channel nr for discover listen. + * @duration: time in ms to stay on channel. * */ static s32 -brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, - struct ieee80211_channel *channel, u32 duration) +brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, u16 channel, u32 duration) { struct brcmf_cfg80211_vif *vif; s32 err = 0; @@ -884,7 +951,7 @@ brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, goto exit; } - chanspec = channel_to_chanspec(channel); + chanspec = brcmf_p2p_chnr_to_chspec(channel); err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, chanspec, (u16)duration); if (!err) { @@ -911,15 +978,16 @@ int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_p2p_info *p2p = &cfg->p2p; s32 err; + u16 channel_nr; - brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", - ieee80211_frequency_to_channel(channel->center_freq), + channel_nr = ieee80211_frequency_to_channel(channel->center_freq); + brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", channel_nr, duration); err = brcmf_p2p_enable_discovery(p2p); if (err) goto exit; - err = brcmf_p2p_discover_listen(p2p, channel, duration); + err = brcmf_p2p_discover_listen(p2p, channel_nr, duration); if (err) goto exit; @@ -949,11 +1017,20 @@ int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, brcmf_dbg(TRACE, "Enter\n"); if (test_and_clear_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, - &p2p->status)) + &p2p->status)) { + if (test_and_clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status)) { + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + &p2p->status); + brcmf_dbg(INFO, "Listen DONE, wake up wait_next_af\n"); + complete(&p2p->wait_next_af); + } + cfg80211_remain_on_channel_expired(&ifp->vif->wdev, p2p->remain_on_channel_cookie, &p2p->remain_on_channel, GFP_KERNEL); + } return 0; } @@ -974,6 +1051,285 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) /** + * brcmf_p2p_act_frm_search() - search function for action frame. + * + * @p2p: p2p device. + * channel: channel on which action frame is to be trasmitted. + * + * search function to reach at common channel to send action frame. When + * channel is 0 then all social channels will be used to send af + */ +static s32 brcmf_p2p_act_frm_search(struct brcmf_p2p_info *p2p, u16 channel) +{ + s32 err; + u32 channel_cnt; + u16 *default_chan_list; + u32 i; + + brcmf_dbg(TRACE, "Enter\n"); + + if (channel) + channel_cnt = AF_PEER_SEARCH_CNT; + else + channel_cnt = SOCIAL_CHAN_CNT; + default_chan_list = kzalloc(channel_cnt * sizeof(*default_chan_list), + GFP_KERNEL); + if (default_chan_list == NULL) { + brcmf_err("channel list allocation failed\n"); + err = -ENOMEM; + goto exit; + } + if (channel) { + /* insert same channel to the chan_list */ + for (i = 0; i < channel_cnt; i++) + default_chan_list[i] = + brcmf_p2p_chnr_to_chspec(channel); + } else { + default_chan_list[0] = brcmf_p2p_chnr_to_chspec(SOCIAL_CHAN_1); + default_chan_list[1] = brcmf_p2p_chnr_to_chspec(SOCIAL_CHAN_2); + default_chan_list[2] = brcmf_p2p_chnr_to_chspec(SOCIAL_CHAN_3); + } + err = brcmf_p2p_escan(p2p, channel_cnt, default_chan_list, + WL_P2P_DISC_ST_SEARCH, WL_ESCAN_ACTION_START, + P2PAPI_BSSCFG_DEVICE); + kfree(default_chan_list); +exit: + return err; +} + + +/** + * brcmf_p2p_afx_handler() - afx worker thread. + * + * @work: + * + */ +static void brcmf_p2p_afx_handler(struct work_struct *work) +{ + struct afx_hdl *afx_hdl = container_of(work, struct afx_hdl, afx_work); + struct brcmf_p2p_info *p2p = container_of(afx_hdl, + struct brcmf_p2p_info, + afx_hdl); + s32 err; + + if (!afx_hdl->is_active) + return; + + if (afx_hdl->is_listen && afx_hdl->my_listen_chan) + /* 100ms ~ 300ms */ + err = brcmf_p2p_discover_listen(p2p, afx_hdl->my_listen_chan, + 100 * (1 + (random32() % 3))); + else + err = brcmf_p2p_act_frm_search(p2p, afx_hdl->peer_listen_chan); + + if (err) { + brcmf_err("ERROR occurred! value is (%d)\n", err); + if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status)) + complete(&afx_hdl->act_frm_scan); + } +} + + +/** + * brcmf_p2p_af_searching_channel() - search channel. + * + * @p2p: p2p device info struct. + * + */ +static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p) +{ + struct afx_hdl *afx_hdl = &p2p->afx_hdl; + struct brcmf_cfg80211_vif *pri_vif; + unsigned long duration; + s32 retry; + + brcmf_dbg(TRACE, "Enter\n"); + + pri_vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + + INIT_COMPLETION(afx_hdl->act_frm_scan); + set_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status); + afx_hdl->is_active = true; + afx_hdl->peer_chan = P2P_INVALID_CHANNEL; + + /* Loop to wait until we find a peer's channel or the + * pending action frame tx is cancelled. + */ + retry = 0; + duration = msecs_to_jiffies(P2P_AF_FRM_SCAN_MAX_WAIT); + while ((retry < P2P_CHANNEL_SYNC_RETRY) && + (afx_hdl->peer_chan == P2P_INVALID_CHANNEL)) { + afx_hdl->is_listen = false; + brcmf_dbg(TRACE, "Scheduling action frame for sending.. (%d)\n", + retry); + /* search peer on peer's listen channel */ + schedule_work(&afx_hdl->afx_work); + wait_for_completion_timeout(&afx_hdl->act_frm_scan, duration); + if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) || + (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status))) + break; + + if (afx_hdl->my_listen_chan) { + brcmf_dbg(TRACE, "Scheduling listen peer, channel=%d\n", + afx_hdl->my_listen_chan); + /* listen on my listen channel */ + afx_hdl->is_listen = true; + schedule_work(&afx_hdl->afx_work); + wait_for_completion_timeout(&afx_hdl->act_frm_scan, + duration); + } + if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) || + (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status))) + break; + retry++; + + /* if sta is connected or connecting, sleep for a while before + * retry af tx or finding a peer + */ + if (test_bit(BRCMF_VIF_STATUS_CONNECTED, &pri_vif->sme_state) || + test_bit(BRCMF_VIF_STATUS_CONNECTING, &pri_vif->sme_state)) + msleep(P2P_DEFAULT_SLEEP_TIME_VSDB); + } + + brcmf_dbg(TRACE, "Completed search/listen peer_chan=%d\n", + afx_hdl->peer_chan); + afx_hdl->is_active = false; + + clear_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status); + + return afx_hdl->peer_chan; +} + + +/** + * brcmf_p2p_scan_finding_common_channel() - was escan used for finding channel + * + * @cfg: common configuration struct. + * @bi: bss info struct, result from scan. + * + */ +bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_bss_info_le *bi) + +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; + u8 *ie; + s32 err; + u8 p2p_dev_addr[ETH_ALEN]; + + if (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status)) + return false; + + if (bi == NULL) { + brcmf_dbg(TRACE, "ACTION FRAME SCAN Done\n"); + if (afx_hdl->peer_chan == P2P_INVALID_CHANNEL) + complete(&afx_hdl->act_frm_scan); + return true; + } + + ie = ((u8 *)bi) + le16_to_cpu(bi->ie_offset); + memset(p2p_dev_addr, 0, sizeof(p2p_dev_addr)); + err = cfg80211_get_p2p_attr(ie, le32_to_cpu(bi->ie_length), + IEEE80211_P2P_ATTR_DEVICE_INFO, + p2p_dev_addr, sizeof(p2p_dev_addr)); + if (err < 0) + err = cfg80211_get_p2p_attr(ie, le32_to_cpu(bi->ie_length), + IEEE80211_P2P_ATTR_DEVICE_ID, + p2p_dev_addr, sizeof(p2p_dev_addr)); + if ((err >= 0) && + (!memcmp(p2p_dev_addr, afx_hdl->tx_dst_addr, ETH_ALEN))) { + afx_hdl->peer_chan = bi->ctl_ch ? bi->ctl_ch : + CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec)); + brcmf_dbg(TRACE, "ACTION FRAME SCAN : Peer %pM found, channel : %d\n", + afx_hdl->tx_dst_addr, afx_hdl->peer_chan); + complete(&afx_hdl->act_frm_scan); + } + return true; +} + +/** + * brcmf_p2p_stop_wait_next_action_frame() - finish scan if af tx complete. + * + * @cfg: common configuration struct. + * + */ +static void +brcmf_p2p_stop_wait_next_action_frame(struct brcmf_cfg80211_info *cfg) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct net_device *ndev = cfg->escan_info.ndev; + + if (test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status) && + (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status) || + test_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status))) { + brcmf_dbg(TRACE, "*** Wake UP ** abort actframe iovar\n"); + /* if channel is not zero, "actfame" uses off channel scan. + * So abort scan for off channel completion. + */ + if (p2p->af_sent_channel) + brcmf_notify_escan_complete(cfg, ndev, true, true); + } else if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status)) { + brcmf_dbg(TRACE, "*** Wake UP ** abort listen for next af frame\n"); + /* So abort scan to cancel listen */ + brcmf_notify_escan_complete(cfg, ndev, true, true); + } +} + + +/** + * brcmf_p2p_gon_req_collision() - Check if go negotiaton collission + * + * @p2p: p2p device info struct. + * + * return true if recevied action frame is to be dropped. + */ +static bool +brcmf_p2p_gon_req_collision(struct brcmf_p2p_info *p2p, u8 *mac) +{ + struct brcmf_cfg80211_info *cfg = p2p->cfg; + struct brcmf_if *ifp; + + brcmf_dbg(TRACE, "Enter\n"); + + if (!test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) || + !p2p->gon_req_action) + return false; + + brcmf_dbg(TRACE, "GO Negotiation Request COLLISION !!!\n"); + /* if sa(peer) addr is less than da(my) addr, then this device + * process peer's gon request and block to send gon req. + * if not (sa addr > da addr), + * this device will process gon request and drop gon req of peer. + */ + ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp; + if (memcmp(mac, ifp->mac_addr, ETH_ALEN) < 0) { + brcmf_dbg(INFO, "Block transmit gon req !!!\n"); + p2p->block_gon_req_tx = true; + /* if we are finding a common channel for sending af, + * do not scan more to block to send current gon req + */ + if (test_and_clear_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status)) + complete(&p2p->afx_hdl.act_frm_scan); + if (test_and_clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + &p2p->status)) + brcmf_p2p_stop_wait_next_action_frame(cfg); + return false; + } + + /* drop gon request of peer to process gon request by this device. */ + brcmf_dbg(INFO, "Drop received gon req !!!\n"); + + return true; +} + + +/** * brcmf_p2p_notify_action_frame_rx() - received action frame. * * @ifp: interfac control. @@ -985,14 +1341,20 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data) { + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; struct wireless_dev *wdev; u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u8 *frame = (u8 *)(rxframe + 1); + struct brcmf_p2p_pub_act_frame *act_frm; + struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; u16 chanspec = be16_to_cpu(rxframe->chanspec); struct ieee80211_mgmt *mgmt_frame; - s32 err; s32 freq; u16 mgmt_type; + u8 action; /* Check if wpa_supplicant has registered for this frame */ brcmf_dbg(INFO, "ifp->vif->mgmt_rx_reg %04x\n", ifp->vif->mgmt_rx_reg); @@ -1000,7 +1362,46 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, if ((ifp->vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) return 0; - brcmf_p2p_print_actframe(false, (u8 *)(rxframe + 1), mgmt_frame_len); + brcmf_p2p_print_actframe(false, frame, mgmt_frame_len); + + action = P2P_PAF_SUBTYPE_INVALID; + if (brcmf_p2p_is_pub_action(frame, mgmt_frame_len)) { + act_frm = (struct brcmf_p2p_pub_act_frame *)frame; + action = act_frm->subtype; + if ((action == P2P_PAF_GON_REQ) && + (brcmf_p2p_gon_req_collision(p2p, (u8 *)e->addr))) { + if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status) && + (memcmp(afx_hdl->tx_dst_addr, e->addr, + ETH_ALEN) == 0)) { + afx_hdl->peer_chan = CHSPEC_CHANNEL(chanspec); + brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n", + afx_hdl->peer_chan); + complete(&afx_hdl->act_frm_scan); + } + return 0; + } + /* After complete GO Negotiation, roll back to mpc mode */ + if ((action == P2P_PAF_GON_CONF) || + (action == P2P_PAF_PROVDIS_RSP)) + brcmf_set_mpc(ifp->ndev, 1); + if (action == P2P_PAF_GON_CONF) { + brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status cleared\n"); + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + } + } else if (brcmf_p2p_is_gas_action(frame, mgmt_frame_len)) { + sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; + action = sd_act_frm->action; + } + + if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) && + (p2p->next_af_subtype == action)) { + brcmf_dbg(TRACE, "We got a right next frame! (%d)\n", action); + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + &p2p->status); + /* Stop waiting for next AF. */ + brcmf_p2p_stop_wait_next_action_frame(cfg); + } mgmt_frame = kzalloc(offsetof(struct ieee80211_mgmt, u) + mgmt_frame_len, GFP_KERNEL); @@ -1009,13 +1410,11 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, return -ENOMEM; } memcpy(mgmt_frame->da, ifp->mac_addr, ETH_ALEN); - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, - ETH_ALEN); - if (err < 0) - brcmf_err("BRCMF_C_GET_BSSID error %d\n", err); + brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, + ETH_ALEN); memcpy(mgmt_frame->sa, e->addr, ETH_ALEN); mgmt_frame->frame_control = cpu_to_le16(IEEE80211_STYPE_ACTION); - memcpy(&mgmt_frame->u, (u8 *)(rxframe + 1), mgmt_frame_len); + memcpy(&mgmt_frame->u, frame, mgmt_frame_len); mgmt_frame_len += offsetof(struct ieee80211_mgmt, u); freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), @@ -1046,15 +1445,29 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, struct brcmf_cfg80211_info *cfg = ifp->drvr->config; struct brcmf_p2p_info *p2p = &cfg->p2p; - brcmf_dbg(INFO, "Enter: status %d\n", e->status); + brcmf_dbg(INFO, "Enter: event %s, status=%d\n", + e->event_code == BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE ? + "ACTION_FRAME_OFF_CHAN_COMPLETE" : "ACTION_FRAME_COMPLETE", + e->status); - if (e->status == BRCMF_E_STATUS_SUCCESS) - set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); - else - set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); - /* for now complete the receiver process here !! */ - complete(&p2p->send_af_done); + if (!test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status)) + return 0; + + if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) { + if (e->status == BRCMF_E_STATUS_SUCCESS) + set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, + &p2p->status); + else { + set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + /* If there is no ack, we don't need to wait for + * WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event + */ + brcmf_p2p_stop_wait_next_action_frame(cfg); + } + } else { + complete(&p2p->send_af_done); + } return 0; } @@ -1080,6 +1493,7 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, brcmf_dbg(TRACE, "Enter\n"); + INIT_COMPLETION(p2p->send_af_done); clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); @@ -1091,6 +1505,9 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, goto exit; } + p2p->af_sent_channel = le32_to_cpu(af_params->channel); + p2p->af_tx_sent_jiffies = jiffies; + timeout = wait_for_completion_timeout(&p2p->send_af_done, msecs_to_jiffies(P2P_AF_MAX_WAIT_TIME)); @@ -1126,16 +1543,21 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, struct brcmf_fil_action_frame_le *action_frame; struct brcmf_p2p_pub_act_frame *act_frm; s32 err = 0; + u16 ie_len; action_frame = &af_params->action_frame; act_frm = (struct brcmf_p2p_pub_act_frame *)(action_frame->data); + config_af_params->extra_listen = true; + switch (act_frm->subtype) { case P2P_PAF_GON_REQ: brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status set\n"); set_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); config_af_params->mpc_onoff = 0; + config_af_params->search_channel = true; p2p->next_af_subtype = act_frm->subtype + 1; + p2p->gon_req_action = true; /* increase dwell time to wait for RESP frame */ af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); break; @@ -1152,8 +1574,10 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, config_af_params->mpc_onoff = 1; /* minimize dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + config_af_params->extra_listen = false; break; case P2P_PAF_INVITE_REQ: + config_af_params->search_channel = true; p2p->next_af_subtype = act_frm->subtype + 1; /* increase dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); @@ -1161,8 +1585,10 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, case P2P_PAF_INVITE_RSP: /* minimize dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + config_af_params->extra_listen = false; break; case P2P_PAF_DEVDIS_REQ: + config_af_params->search_channel = true; p2p->next_af_subtype = act_frm->subtype + 1; /* maximize dwell time to wait for RESP frame */ af_params->dwell_time = cpu_to_le32(P2P_AF_LONG_DWELL_TIME); @@ -1170,8 +1596,15 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, case P2P_PAF_DEVDIS_RSP: /* minimize dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + config_af_params->extra_listen = false; break; case P2P_PAF_PROVDIS_REQ: + ie_len = le16_to_cpu(action_frame->len) - + offsetof(struct brcmf_p2p_pub_act_frame, elts); + if (cfg80211_get_p2p_attr(&act_frm->elts[0], ie_len, + IEEE80211_P2P_ATTR_GROUP_ID, + NULL, 0) < 0) + config_af_params->search_channel = true; config_af_params->mpc_onoff = 0; p2p->next_af_subtype = act_frm->subtype + 1; /* increase dwell time to wait for RESP frame */ @@ -1182,6 +1615,7 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, p2p->next_af_subtype = P2P_PAF_GON_REQ; /* increase dwell time to MED level */ af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + config_af_params->extra_listen = false; break; default: brcmf_err("Unknown p2p pub act frame subtype: %d\n", @@ -1205,11 +1639,14 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, struct brcmf_p2p_info *p2p = &cfg->p2p; struct brcmf_fil_action_frame_le *action_frame; struct brcmf_config_af_params config_af_params; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; u16 action_frame_len; bool ack = false; u8 category; u8 action; s32 tx_retry; + s32 extra_listen_time; + uint delta_ms; action_frame = &af_params->action_frame; action_frame_len = le16_to_cpu(action_frame->len); @@ -1226,10 +1663,12 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, /* initialize variables */ p2p->next_af_subtype = P2P_PAF_SUBTYPE_INVALID; + p2p->gon_req_action = false; /* config parameters */ - config_af_params.max_tx_retry = P2P_AF_TX_MAX_RETRY; config_af_params.mpc_onoff = -1; + config_af_params.search_channel = false; + config_af_params.extra_listen = false; if (brcmf_p2p_is_pub_action(action_frame->data, action_frame_len)) { /* p2p public action frame process */ @@ -1243,6 +1682,9 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, /* service discovery process */ if (action == P2PSD_ACTION_ID_GAS_IREQ || action == P2PSD_ACTION_ID_GAS_CREQ) { + /* configure service discovery query frame */ + config_af_params.search_channel = true; + /* save next af suptype to cancel */ /* remaining dwell time */ p2p->next_af_subtype = action + 1; @@ -1268,24 +1710,114 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, return false; } + /* if connecting on primary iface, sleep for a while before sending + * af tx for VSDB + */ + if (test_bit(BRCMF_VIF_STATUS_CONNECTING, + &p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->sme_state)) + msleep(50); + /* if scan is ongoing, abort current scan. */ if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) brcmf_abort_scanning(cfg); + memcpy(afx_hdl->tx_dst_addr, action_frame->da, ETH_ALEN); + /* To make sure to send successfully action frame, turn off mpc */ if (config_af_params.mpc_onoff == 0) brcmf_set_mpc(ndev, 0); - /* if failed, retry it. tx_retry_max value is configure by .... */ + /* set status and destination address before sending af */ + if (p2p->next_af_subtype != P2P_PAF_SUBTYPE_INVALID) { + /* set status to cancel the remained dwell time in rx process */ + set_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status); + } + + p2p->af_sent_channel = 0; + set_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status); + /* validate channel and p2p ies */ + if (config_af_params.search_channel && + IS_P2P_SOCIAL_CHANNEL(le32_to_cpu(af_params->channel)) && + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->saved_ie.probe_req_ie_len) { + afx_hdl = &p2p->afx_hdl; + afx_hdl->peer_listen_chan = le32_to_cpu(af_params->channel); + + if (brcmf_p2p_af_searching_channel(p2p) == + P2P_INVALID_CHANNEL) { + brcmf_err("Couldn't find peer's channel.\n"); + goto exit; + } + + /* Abort scan even for VSDB scenarios. Scan gets aborted in + * firmware but after the check of piggyback algorithm. To take + * care of current piggback algo, lets abort the scan here + * itself. + */ + brcmf_notify_escan_complete(cfg, ndev, true, true); + + /* update channel */ + af_params->channel = cpu_to_le32(afx_hdl->peer_chan); + } + tx_retry = 0; - while ((ack == false) && (tx_retry < config_af_params.max_tx_retry)) { + while (!p2p->block_gon_req_tx && + (ack == false) && (tx_retry < P2P_AF_TX_MAX_RETRY)) { ack = !brcmf_p2p_tx_action_frame(p2p, af_params); tx_retry++; } - if (ack == false) + if (ack == false) { brcmf_err("Failed to send Action Frame(retry %d)\n", tx_retry); + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + } exit: + clear_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status); + + /* WAR: sometimes dongle does not keep the dwell time of 'actframe'. + * if we coundn't get the next action response frame and dongle does + * not keep the dwell time, go to listen state again to get next action + * response frame. + */ + if (ack && config_af_params.extra_listen && !p2p->block_gon_req_tx && + test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) && + p2p->af_sent_channel == afx_hdl->my_listen_chan) { + delta_ms = jiffies_to_msecs(jiffies - p2p->af_tx_sent_jiffies); + if (le32_to_cpu(af_params->dwell_time) > delta_ms) + extra_listen_time = le32_to_cpu(af_params->dwell_time) - + delta_ms; + else + extra_listen_time = 0; + if (extra_listen_time > 50) { + set_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status); + brcmf_dbg(INFO, "Wait more time! actual af time:%d, calculated extra listen:%d\n", + le32_to_cpu(af_params->dwell_time), + extra_listen_time); + extra_listen_time += 100; + if (!brcmf_p2p_discover_listen(p2p, + p2p->af_sent_channel, + extra_listen_time)) { + unsigned long duration; + + extra_listen_time += 100; + duration = msecs_to_jiffies(extra_listen_time); + wait_for_completion_timeout(&p2p->wait_next_af, + duration); + } + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status); + } + } + + if (p2p->block_gon_req_tx) { + /* if ack is true, supplicant will wait more time(100ms). + * so we will return it as a success to get more time . + */ + p2p->block_gon_req_tx = false; + ack = true; + } + + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status); /* if all done, turn mpc on again */ if (config_af_params.mpc_onoff == 1) brcmf_set_mpc(ndev, 1); @@ -1293,6 +1825,72 @@ exit: return ack; } +/** + * brcmf_p2p_notify_rx_mgmt_p2p_probereq() - Event handler for p2p probe req. + * + * @ifp: interface pointer for which event was received. + * @e: even message. + * @data: payload of event message (probe request). + */ +s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; + struct wireless_dev *wdev; + struct brcmf_cfg80211_vif *vif = ifp->vif; + struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u16 chanspec = be16_to_cpu(rxframe->chanspec); + u8 *mgmt_frame; + u32 mgmt_frame_len; + s32 freq; + u16 mgmt_type; + + brcmf_dbg(INFO, "Enter: event %d reason %d\n", e->event_code, + e->reason); + + if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) && + (memcmp(afx_hdl->tx_dst_addr, e->addr, ETH_ALEN) == 0)) { + afx_hdl->peer_chan = CHSPEC_CHANNEL(chanspec); + brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n", + afx_hdl->peer_chan); + complete(&afx_hdl->act_frm_scan); + } + + /* Firmware sends us two proberesponses for each idx one. At the */ + /* moment anything but bsscfgidx 0 is passed up to supplicant */ + if (e->bsscfgidx == 0) + return 0; + + /* Filter any P2P probe reqs arriving during the GO-NEG Phase */ + if (test_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status)) { + brcmf_dbg(INFO, "Filtering P2P probe_req in GO-NEG phase\n"); + return 0; + } + + /* Check if wpa_supplicant has registered for this frame */ + brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); + mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; + if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) + return 0; + + mgmt_frame = (u8 *)(rxframe + 1); + mgmt_frame_len = e->datalen - sizeof(*rxframe); + freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), + CHSPEC_IS2G(chanspec) ? + IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ); + wdev = ifp->ndev->ieee80211_ptr; + cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC); + + brcmf_dbg(INFO, "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", + mgmt_frame_len, e->datalen, chanspec, freq); + + return 0; +} + /** * brcmf_p2p_attach() - attach for P2P. @@ -1362,6 +1960,9 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) } init_completion(&p2p->send_af_done); + INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); + init_completion(&p2p->afx_hdl.act_frm_scan); + init_completion(&p2p->wait_next_af); } exit: return err; @@ -1622,6 +2223,7 @@ fail: int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct brcmf_p2p_info *p2p = &cfg->p2p; struct brcmf_cfg80211_vif *vif; unsigned long jiffie_timeout = msecs_to_jiffies(1500); bool wait_for_disable = false; @@ -1647,6 +2249,9 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; } + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); + if (wait_for_disable) wait_for_completion_timeout(&cfg->vif_disabled, msecs_to_jiffies(500)); @@ -1666,7 +2271,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) } brcmf_cfg80211_arm_vif_event(cfg, NULL); brcmf_free_vif(vif); - cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; + p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 9e0e962..6821b26 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -58,6 +58,10 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. * @BRCMF_P2P_STATUS_DISCOVER_LISTEN: P2P listen, remaining on channel. + * @BRCMF_P2P_STATUS_SENDING_ACT_FRAME: In the process of sending action frame. + * @BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN: extra listen time for af tx. + * @BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME: waiting for action frame response. + * @BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL: search channel for AF active. */ enum brcmf_p2p_status { BRCMF_P2P_STATUS_ENABLED, @@ -69,7 +73,34 @@ enum brcmf_p2p_status { BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, BRCMF_P2P_STATUS_ACTION_TX_NOACK, BRCMF_P2P_STATUS_GO_NEG_PHASE, - BRCMF_P2P_STATUS_DISCOVER_LISTEN + BRCMF_P2P_STATUS_DISCOVER_LISTEN, + BRCMF_P2P_STATUS_SENDING_ACT_FRAME, + BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL +}; + +/** + * struct afx_hdl - action frame off channel storage. + * + * @afx_work: worker thread for searching channel + * @act_frm_scan: thread synchronizing struct. + * @is_active: channel searching active. + * @peer_chan: current channel. + * @is_listen: sets mode for afx worker. + * @my_listen_chan: this peers listen channel. + * @peer_listen_chan: remote peers listen channel. + * @tx_dst_addr: mac address where tx af should be sent to. + */ +struct afx_hdl { + struct work_struct afx_work; + struct completion act_frm_scan; + bool is_active; + s32 peer_chan; + bool is_listen; + u16 my_listen_chan; + u16 peer_listen_chan; + u8 tx_dst_addr[ETH_ALEN]; }; /** @@ -87,6 +118,12 @@ enum brcmf_p2p_status { * @remain_on_channel_cookie: cookie counter for remain on channel cmd * @next_af_subtype: expected action frame subtype. * @send_af_done: indication that action frame tx is complete. + * @afx_hdl: action frame search handler info. + * @af_sent_channel: channel action frame is sent. + * @af_tx_sent_jiffies: jiffies time when af tx was transmitted. + * @wait_next_af: thread synchronizing struct. + * @gon_req_action: about to send go negotiation requets frame. + * @block_gon_req_tx: drop tx go negotiation requets frame. */ struct brcmf_p2p_info { struct brcmf_cfg80211_info *cfg; @@ -101,6 +138,12 @@ struct brcmf_p2p_info { u32 remain_on_channel_cookie; u8 next_af_subtype; struct completion send_af_done; + struct afx_hdl afx_hdl; + u32 af_sent_channel; + unsigned long af_tx_sent_jiffies; + struct completion wait_next_af; + bool gon_req_action; + bool block_gon_req_tx; }; s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); @@ -132,5 +175,9 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, struct brcmf_fil_af_params_le *af_params); - +bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_bss_info_le *bi); +s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index b5cc154..481f41a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -601,10 +601,8 @@ brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, cfg80211_scan_done(scan_request, aborted); brcmf_set_mpc(ndev, 1); } - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - brcmf_err("Scan complete while device not scanning\n"); - return -EPERM; - } + if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) + brcmf_dbg(SCAN, "Scan complete, probably P2P scan\n"); return err; } @@ -2525,8 +2523,7 @@ static void brcmf_cfg80211_escan_timeout_worker(struct work_struct *work) container_of(work, struct brcmf_cfg80211_info, escan_timeout_work); - brcmf_notify_escan_complete(cfg, - cfg->escan_info.ndev, true, true); + brcmf_notify_escan_complete(cfg, cfg->escan_info.ndev, true, true); } static void brcmf_escan_timeout(unsigned long data) @@ -2603,11 +2600,6 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, brcmf_err("Invalid escan result (NULL pointer)\n"); goto exit; } - if (!cfg->scan_request) { - brcmf_dbg(SCAN, "result without cfg80211 request\n"); - goto exit; - } - if (le16_to_cpu(escan_result_le->bss_count) != 1) { brcmf_err("Invalid bss_count %d: ignoring\n", escan_result_le->bss_count); @@ -2615,6 +2607,14 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, } bss_info_le = &escan_result_le->bss_info_le; + if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le)) + goto exit; + + if (!cfg->scan_request) { + brcmf_dbg(SCAN, "result without cfg80211 request\n"); + goto exit; + } + bi_length = le32_to_cpu(bss_info_le->length); if (bi_length != (le32_to_cpu(escan_result_le->buflen) - WL_ESCAN_RESULTS_FIXED_SIZE)) { @@ -2653,6 +2653,8 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, list->count++; } else { cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE; + if (brcmf_p2p_scan_finding_common_channel(cfg, NULL)) + goto exit; if (cfg->scan_request) { cfg->bss_list = (struct brcmf_scan_results *) cfg->escan_info.escan_buf; @@ -2661,7 +2663,8 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, brcmf_notify_escan_complete(cfg, ndev, aborted, false); } else - brcmf_err("Unexpected scan result 0x%x\n", status); + brcmf_dbg(SCAN, "Ignored scan complete result 0x%x\n", + status); } exit: return err; @@ -4038,50 +4041,6 @@ exit: return err; } -static s32 brcmf_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, - const struct brcmf_event_msg *e, - void *data) -{ - struct wireless_dev *wdev; - struct brcmf_cfg80211_vif *vif = ifp->vif; - struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; - u16 chanspec = be16_to_cpu(rxframe->chanspec); - u8 *mgmt_frame; - u32 mgmt_frame_len; - s32 freq; - u16 mgmt_type; - - brcmf_dbg(INFO, - "Enter: event %d reason %d\n", e->event_code, e->reason); - - /* Firmware sends us two proberesponses for each idx one. At the */ - /* moment anything but bsscfgidx 0 is passed up to supplicant */ - if (e->bsscfgidx == 0) - return 0; - - /* Check if wpa_supplicant has registered for this frame */ - brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); - mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; - if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) - return 0; - - mgmt_frame = (u8 *)(rxframe + 1); - mgmt_frame_len = e->datalen - sizeof(*rxframe); - freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), - CHSPEC_IS2G(chanspec) ? - IEEE80211_BAND_2GHZ : - IEEE80211_BAND_5GHZ); - wdev = ifp->ndev->ieee80211_ptr; - cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC); - - brcmf_dbg(INFO, - "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", - mgmt_frame_len, e->datalen, chanspec, freq); - - return 0; -} - - static struct cfg80211_ops wl_cfg80211_ops = { .add_virtual_intf = brcmf_cfg80211_add_iface, .del_virtual_intf = brcmf_cfg80211_del_iface, @@ -4240,6 +4199,7 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) wiphy->cipher_suites = __wl_cipher_suites; wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | + WIPHY_FLAG_OFFCHAN_TX | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; wiphy->mgmt_stypes = brcmf_txrx_stypes; wiphy->max_remain_on_channel_duration = 5000; @@ -4721,13 +4681,15 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_fweh_register(cfg->pub, BRCMF_E_IF, brcmf_notify_vif_event); brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_PROBEREQ_MSG, - brcmf_notify_rx_mgmt_p2p_probereq); + brcmf_p2p_notify_rx_mgmt_p2p_probereq); brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, brcmf_p2p_notify_listen_complete); brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, brcmf_p2p_notify_action_frame_rx); brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_COMPLETE, brcmf_p2p_notify_action_tx_complete); + brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE, + brcmf_p2p_notify_action_tx_complete); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) -- cgit v0.10.2 From 8708aac79e4572ba673d7a21e94ddca9f3abb7fc Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 8 Feb 2013 12:28:18 -0600 Subject: rtlwifi: rtl8192cu: Add new USB ID A new model of the RTL8188CUS has appeared. Reported-and-tested-by: Thomas Rosenkrantz Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 577c0dc..a73a17b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -285,6 +285,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)}, /* RTL8188CUS-VL */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x818a, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x819a, rtl92cu_hal_cfg)}, /* 8188 Combo for BC4 */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)}, -- cgit v0.10.2 From e5e67305885eb12849b5475764b0542f03dc2b59 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 8 Feb 2013 10:17:15 +0000 Subject: skbuff: Move definition of NETDEV_FRAG_PAGE_MAX_SIZE In order to address the fact that some devices cannot support the full 32K frag size we need to have the value accessible somewhere so that we can use it to do comparisons against what the device can support. As such I am moving the values out of skbuff.c and into skbuff.h. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 0259b71..d7573c3 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1832,6 +1832,10 @@ static inline void __skb_queue_purge(struct sk_buff_head *list) kfree_skb(skb); } +#define NETDEV_FRAG_PAGE_MAX_ORDER get_order(32768) +#define NETDEV_FRAG_PAGE_MAX_SIZE (PAGE_SIZE << NETDEV_FRAG_PAGE_MAX_ORDER) +#define NETDEV_PAGECNT_MAX_BIAS NETDEV_FRAG_PAGE_MAX_SIZE + extern void *netdev_alloc_frag(unsigned int fragsz); extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev, diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 55f7ef6..6114c11 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -351,10 +351,6 @@ struct netdev_alloc_cache { }; static DEFINE_PER_CPU(struct netdev_alloc_cache, netdev_alloc_cache); -#define NETDEV_FRAG_PAGE_MAX_ORDER get_order(32768) -#define NETDEV_FRAG_PAGE_MAX_SIZE (PAGE_SIZE << NETDEV_FRAG_PAGE_MAX_ORDER) -#define NETDEV_PAGECNT_MAX_BIAS NETDEV_FRAG_PAGE_MAX_SIZE - static void *__netdev_alloc_frag(unsigned int fragsz, gfp_t gfp_mask) { struct netdev_alloc_cache *nc; -- cgit v0.10.2 From d166f218ff2bae0f6adae9ce5444a889a1d749e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 7 Feb 2013 00:27:17 +0000 Subject: bgmac: validate (and random if needed) MAC addr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds check for a valid Ethernet MAC address and in case it is not, it will generate a valid random one, such that the adapter is still usable. Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 23c8d4a..380084b 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1318,6 +1318,12 @@ static int bgmac_probe(struct bcma_device *core) return -ENOTSUPP; } + if (!is_valid_ether_addr(mac)) { + dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac); + eth_random_addr(mac); + dev_warn(&core->dev, "Using random MAC: %pM\n", mac); + } + /* Allocation and references */ net_dev = alloc_etherdev(sizeof(*bgmac)); if (!net_dev) -- cgit v0.10.2 From e9ba103931950da7bc87d58ffe39612df17d47af Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 7 Feb 2013 05:40:38 +0000 Subject: bgmac: fix "cmdcfg" calls for promisc and loopback modes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The last (bool) parameter in bgmac_cmdcfg_maskset says if the write should be made, even if value didn't change. Currently driver doesn't match the specs about (not) forcing some changes. This makes it follow them. Reported-by: Nathan Hintz Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 380084b..7bc8017 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -776,9 +776,9 @@ static void bgmac_set_rx_mode(struct net_device *net_dev) struct bgmac *bgmac = netdev_priv(net_dev); if (net_dev->flags & IFF_PROMISC) - bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, true); else - bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, true); } #if 0 /* We don't use that regs yet */ @@ -1039,9 +1039,9 @@ static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr); if (bgmac->loopback) - bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); else - bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true); + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, false); bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); -- cgit v0.10.2 From 14f8dc49532f765968ff37c3b99edbeb99004ace Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 7 Feb 2013 11:46:27 +0000 Subject: drivers: net: Remove remaining alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. For the affected mallocs around these OOM messages: Converted kmallocs with multiplies to kmalloc_array. Converted a kmalloc/memcpy to kmemdup. Removed now unused stack variables. Removed unnecessary parentheses. Neatened alignment. Signed-off-by: Joe Perches Acked-by: Arend van Spriel Acked-by: Marc Kleine-Budde Acked-by: John W. Linville Signed-off-by: David S. Miller diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 0e7bde7..5f9a7ad 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -1019,10 +1019,8 @@ static int ems_usb_probe(struct usb_interface *intf, dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE + sizeof(struct ems_cpc_msg), GFP_KERNEL); - if (!dev->tx_msg_buffer) { - dev_err(&intf->dev, "Couldn't alloc Tx buffer\n"); + if (!dev->tx_msg_buffer) goto cleanup_intr_in_buffer; - } usb_set_intfdata(intf, dev); diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c index 74cfc01..797f847 100644 --- a/drivers/net/ethernet/amd/pcnet32.c +++ b/drivers/net/ethernet/amd/pcnet32.c @@ -494,19 +494,15 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, } memset(new_tx_ring, 0, sizeof(struct pcnet32_tx_head) * (1 << size)); - new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t), - GFP_ATOMIC); - if (!new_dma_addr_list) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + new_dma_addr_list = kcalloc(1 << size, sizeof(dma_addr_t), + GFP_ATOMIC); + if (!new_dma_addr_list) goto free_new_tx_ring; - } - new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *), - GFP_ATOMIC); - if (!new_skb_list) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + new_skb_list = kcalloc(1 << size, sizeof(struct sk_buff *), + GFP_ATOMIC); + if (!new_skb_list) goto free_new_lists; - } kfree(lp->tx_skbuff); kfree(lp->tx_dma_addr); @@ -564,19 +560,14 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, } memset(new_rx_ring, 0, sizeof(struct pcnet32_rx_head) * (1 << size)); - new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t), - GFP_ATOMIC); - if (!new_dma_addr_list) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + new_dma_addr_list = kcalloc(1 << size, sizeof(dma_addr_t), GFP_ATOMIC); + if (!new_dma_addr_list) goto free_new_rx_ring; - } - new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *), - GFP_ATOMIC); - if (!new_skb_list) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + new_skb_list = kcalloc(1 << size, sizeof(struct sk_buff *), + GFP_ATOMIC); + if (!new_skb_list) goto free_new_lists; - } /* first copy the current receive buffers */ overlap = min(size, lp->rx_ring_size); @@ -1933,31 +1924,23 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) lp->tx_dma_addr = kcalloc(lp->tx_ring_size, sizeof(dma_addr_t), GFP_ATOMIC); - if (!lp->tx_dma_addr) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + if (!lp->tx_dma_addr) return -ENOMEM; - } lp->rx_dma_addr = kcalloc(lp->rx_ring_size, sizeof(dma_addr_t), GFP_ATOMIC); - if (!lp->rx_dma_addr) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + if (!lp->rx_dma_addr) return -ENOMEM; - } lp->tx_skbuff = kcalloc(lp->tx_ring_size, sizeof(struct sk_buff *), GFP_ATOMIC); - if (!lp->tx_skbuff) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + if (!lp->tx_skbuff) return -ENOMEM; - } lp->rx_skbuff = kcalloc(lp->rx_ring_size, sizeof(struct sk_buff *), GFP_ATOMIC); - if (!lp->rx_skbuff) { - netif_err(lp, drv, dev, "Memory allocation failed\n"); + if (!lp->rx_skbuff) return -ENOMEM; - } return 0; } diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 75734bf..ab32bd0 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -277,14 +277,12 @@ static int gfar_alloc_skb_resources(struct net_device *ndev) /* Setup the skbuff rings */ for (i = 0; i < priv->num_tx_queues; i++) { tx_queue = priv->tx_queue[i]; - tx_queue->tx_skbuff = kmalloc(sizeof(*tx_queue->tx_skbuff) * - tx_queue->tx_ring_size, - GFP_KERNEL); - if (!tx_queue->tx_skbuff) { - netif_err(priv, ifup, ndev, - "Could not allocate tx_skbuff\n"); + tx_queue->tx_skbuff = + kmalloc_array(tx_queue->tx_ring_size, + sizeof(*tx_queue->tx_skbuff), + GFP_KERNEL); + if (!tx_queue->tx_skbuff) goto cleanup; - } for (k = 0; k < tx_queue->tx_ring_size; k++) tx_queue->tx_skbuff[k] = NULL; @@ -292,15 +290,12 @@ static int gfar_alloc_skb_resources(struct net_device *ndev) for (i = 0; i < priv->num_rx_queues; i++) { rx_queue = priv->rx_queue[i]; - rx_queue->rx_skbuff = kmalloc(sizeof(*rx_queue->rx_skbuff) * - rx_queue->rx_ring_size, - GFP_KERNEL); - - if (!rx_queue->rx_skbuff) { - netif_err(priv, ifup, ndev, - "Could not allocate rx_skbuff\n"); + rx_queue->rx_skbuff = + kmalloc_array(rx_queue->rx_ring_size, + sizeof(*rx_queue->rx_skbuff), + GFP_KERNEL); + if (!rx_queue->rx_skbuff) goto cleanup; - } for (j = 0; j < rx_queue->rx_ring_size; j++) rx_queue->rx_skbuff[j] = NULL; diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index b20fff1..d947e3a 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1509,11 +1509,8 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter, size = sizeof(struct e1000_buffer) * txdr->count; txdr->buffer_info = vzalloc(size); - if (!txdr->buffer_info) { - e_err(probe, "Unable to allocate memory for the Tx descriptor " - "ring\n"); + if (!txdr->buffer_info) return -ENOMEM; - } /* round up to nearest 4K */ @@ -1704,11 +1701,8 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter, size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vzalloc(size); - if (!rxdr->buffer_info) { - e_err(probe, "Unable to allocate memory for the Rx descriptor " - "ring\n"); + if (!rxdr->buffer_info) return -ENOMEM; - } desc_len = sizeof(struct e1000_rx_desc); @@ -2252,10 +2246,8 @@ static void e1000_set_rx_mode(struct net_device *netdev) int mta_reg_count = E1000_NUM_MTA_REGISTERS; u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC); - if (!mcarray) { - e_err(probe, "memory allocation failed\n"); + if (!mcarray) return; - } /* Check for Promiscuous and All Multicast modes */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index c756412..ea48083 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -708,11 +708,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter) size = sizeof(struct ixgb_buffer) * txdr->count; txdr->buffer_info = vzalloc(size); - if (!txdr->buffer_info) { - netif_err(adapter, probe, adapter->netdev, - "Unable to allocate transmit descriptor ring memory\n"); + if (!txdr->buffer_info) return -ENOMEM; - } /* round up to nearest 4K */ @@ -797,11 +794,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter) size = sizeof(struct ixgb_buffer) * rxdr->count; rxdr->buffer_info = vzalloc(size); - if (!rxdr->buffer_info) { - netif_err(adapter, probe, adapter->netdev, - "Unable to allocate receive descriptor ring\n"); + if (!rxdr->buffer_info) return -ENOMEM; - } /* Round up to nearest 4K */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index c116884..f58db45 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -716,10 +716,8 @@ int ixgbe_setup_fcoe_ddp_resources(struct ixgbe_adapter *adapter) /* Extra buffer to be shared by all DDPs for HW work around */ buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC); - if (!buffer) { - e_err(drv, "failed to allocate extra DDP buffer\n"); + if (!buffer) return -ENOMEM; - } dma = dma_map_single(dev, buffer, IXGBE_FCBUFF_MIN, DMA_FROM_DEVICE); if (dma_mapping_error(dev, dma)) { diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 8a08c5e..00f25b5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -741,7 +741,6 @@ static int add_ip_rule(struct mlx4_en_priv *priv, spec_l3 = kzalloc(sizeof(*spec_l3), GFP_KERNEL); spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL); if (!spec_l2 || !spec_l3) { - en_err(priv, "Fail to alloc ethtool rule.\n"); err = -ENOMEM; goto free_spec; } @@ -782,7 +781,6 @@ static int add_tcp_udp_rule(struct mlx4_en_priv *priv, spec_l3 = kzalloc(sizeof(*spec_l3), GFP_KERNEL); spec_l4 = kzalloc(sizeof(*spec_l4), GFP_KERNEL); if (!spec_l2 || !spec_l3 || !spec_l4) { - en_err(priv, "Fail to alloc ethtool rule.\n"); err = -ENOMEM; goto free_spec; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index c9a191b..937bcc3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -708,7 +708,6 @@ static void mlx4_en_cache_mclist(struct net_device *dev) netdev_for_each_mc_addr(ha, dev) { tmp = kzalloc(sizeof(struct mlx4_en_mc_list), GFP_ATOMIC); if (!tmp) { - en_err(priv, "failed to allocate multicast list\n"); mlx4_en_clear_list(dev); return; } @@ -752,14 +751,12 @@ static void update_mclist_flags(struct mlx4_en_priv *priv, } } if (!found) { - new_mc = kmalloc(sizeof(struct mlx4_en_mc_list), + new_mc = kmemdup(src_tmp, + sizeof(struct mlx4_en_mc_list), GFP_KERNEL); - if (!new_mc) { - en_err(priv, "Failed to allocate current multicast list\n"); + if (!new_mc) return; - } - memcpy(new_mc, src_tmp, - sizeof(struct mlx4_en_mc_list)); + new_mc->action = MCLIST_ADD; list_add_tail(&new_mc->list, dst); } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 91bb8e1..ce38654 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -852,11 +852,9 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn, struct mlx4_qp_context *context; int err = 0; - context = kmalloc(sizeof *context , GFP_KERNEL); - if (!context) { - en_err(priv, "Failed to allocate qp context\n"); + context = kmalloc(sizeof(*context), GFP_KERNEL); + if (!context) return -ENOMEM; - } err = mlx4_qp_alloc(mdev->dev, qpn, qp); if (err) { diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 325627e..b13ab54 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -2920,14 +2920,11 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev, /* * Allocate small buffer queue control blocks. */ - rx_ring->sbq = - kmalloc(rx_ring->sbq_len * sizeof(struct bq_desc), - GFP_KERNEL); - if (rx_ring->sbq == NULL) { - netif_err(qdev, ifup, qdev->ndev, - "Small buffer queue control block allocation failed.\n"); + rx_ring->sbq = kmalloc_array(rx_ring->sbq_len, + sizeof(struct bq_desc), + GFP_KERNEL); + if (rx_ring->sbq == NULL) goto err_mem; - } ql_init_sbq_ring(qdev, rx_ring); } @@ -2948,14 +2945,11 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev, /* * Allocate large buffer queue control blocks. */ - rx_ring->lbq = - kmalloc(rx_ring->lbq_len * sizeof(struct bq_desc), - GFP_KERNEL); - if (rx_ring->lbq == NULL) { - netif_err(qdev, ifup, qdev->ndev, - "Large buffer queue control block allocation failed.\n"); + rx_ring->lbq = kmalloc_array(rx_ring->lbq_len, + sizeof(struct bq_desc), + GFP_KERNEL); + if (rx_ring->lbq == NULL) goto err_mem; - } ql_init_lbq_ring(qdev, rx_ring); } diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c index ecfb436..d457fa2 100644 --- a/drivers/net/ethernet/smsc/smsc9420.c +++ b/drivers/net/ethernet/smsc/smsc9420.c @@ -1250,12 +1250,11 @@ static int smsc9420_alloc_tx_ring(struct smsc9420_pdata *pd) BUG_ON(!pd->tx_ring); - pd->tx_buffers = kmalloc((sizeof(struct smsc9420_ring_info) * - TX_RING_SIZE), GFP_KERNEL); - if (!pd->tx_buffers) { - smsc_warn(IFUP, "Failed to allocated tx_buffers"); + pd->tx_buffers = kmalloc_array(TX_RING_SIZE, + sizeof(struct smsc9420_ring_info), + GFP_KERNEL); + if (!pd->tx_buffers) return -ENOMEM; - } /* Initialize the TX Ring */ for (i = 0; i < TX_RING_SIZE; i++) { diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 8ee5ab0..73051d1 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -149,11 +149,9 @@ static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, DECLARE_WAITQUEUE(wait, current); buffer = kmalloc(size, GFP_KERNEL); - if (!buffer) { - netif_warn(pegasus, drv, pegasus->net, - "out of memory in %s\n", __func__); + if (!buffer) return -ENOMEM; - } + add_wait_queue(&pegasus->ctrl_wait, &wait); set_current_state(TASK_UNINTERRUPTIBLE); while (pegasus->flags & ETH_REGS_CHANGED) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index b6a5a08..3ad1fd0 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -1196,20 +1196,17 @@ void ath9k_rx_cleanup(struct ath9k_htc_priv *priv) int ath9k_rx_init(struct ath9k_htc_priv *priv) { - struct ath_hw *ah = priv->ah; - struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_htc_rxbuf *rxbuf; int i = 0; INIT_LIST_HEAD(&priv->rx.rxbuf); spin_lock_init(&priv->rx.rxbuflock); for (i = 0; i < ATH9K_HTC_RXBUF; i++) { - rxbuf = kzalloc(sizeof(struct ath9k_htc_rxbuf), GFP_KERNEL); - if (rxbuf == NULL) { - ath_err(common, "Unable to allocate RX buffers\n"); + struct ath9k_htc_rxbuf *rxbuf = + kzalloc(sizeof(struct ath9k_htc_rxbuf), GFP_KERNEL); + if (rxbuf == NULL) goto err; - } + list_add_tail(&rxbuf->list, &priv->rx.rxbuf); } diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 42cf3c7..2a2ae40 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2981,13 +2981,8 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah, struct ath_gen_timer *timer; timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL); - - if (timer == NULL) { - ath_err(ath9k_hw_common(ah), - "Failed to allocate memory for hw timer[%d]\n", - timer_index); + if (timer == NULL) return NULL; - } /* allocate a hardware generic timer slot */ timer_table->timers[timer_index] = timer; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 714558d..faa752b 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1452,17 +1452,7 @@ static void ath_rate_free(void *priv) static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) { - struct ath_softc *sc = priv; - struct ath_rate_priv *rate_priv; - - rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp); - if (!rate_priv) { - ath_err(ath9k_hw_common(sc->sc_ah), - "Unable to allocate private rc structure\n"); - return NULL; - } - - return rate_priv; + return kzalloc(sizeof(struct ath_rate_priv), gfp); } static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 64b971f..d1315b4 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -74,8 +74,6 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring) vring->swtail = 0; vring->ctx = kzalloc(vring->size * sizeof(vring->ctx[0]), GFP_KERNEL); if (!vring->ctx) { - wil_err(wil, "vring_alloc [%d] failed to alloc ctx mem\n", - vring->size); vring->va = NULL; return -ENOMEM; } diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 0b70e17..c8aca3d 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -587,11 +587,9 @@ void wmi_recv_cmd(struct wil6210_priv *wil) evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event, event.wmi) + len, 4), GFP_KERNEL); - if (!evt) { - wil_err(wil, "kmalloc for WMI event (%d) failed\n", - len); + if (!evt) return; - } + evt->event.hdr = hdr; cmd = (void *)&evt->event.wmi; wil_memcpy_fromio_32(cmd, src, len); @@ -838,10 +836,8 @@ int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie) int rc; u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len; struct wmi_set_appie_cmd *cmd = kzalloc(len, GFP_KERNEL); - if (!cmd) { - wil_err(wil, "kmalloc(%d) failed\n", len); + if (!cmd) return -ENOMEM; - } cmd->mgmt_frm_type = type; /* BUG: FW API define ieLen as u8. Will fix FW */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 7fef9b5..6d786a2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1445,10 +1445,9 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if (bus->rxblen) buf = vzalloc(bus->rxblen); - if (!buf) { - brcmf_err("no memory for control frame\n"); + if (!buf) goto done; - } + rbuf = bus->rxbuf; pad = ((unsigned long)rbuf % BRCMF_SDALIGN); if (pad) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index e15630c..bc5a042 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -354,11 +354,10 @@ brcmf_usbdev_qinit(struct list_head *q, int qsize) int i; struct brcmf_usbreq *req, *reqs; - reqs = kzalloc(sizeof(struct brcmf_usbreq) * qsize, GFP_ATOMIC); - if (reqs == NULL) { - brcmf_err("fail to allocate memory!\n"); + reqs = kcalloc(qsize, sizeof(struct brcmf_usbreq), GFP_ATOMIC); + if (reqs == NULL) return NULL; - } + req = reqs; for (i = 0; i < qsize; i++) { diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 2031130..a79c916 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1149,7 +1149,6 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rxq->buf = kcalloc(MWL8K_RX_DESCS, sizeof(*rxq->buf), GFP_KERNEL); if (rxq->buf == NULL) { - wiphy_err(hw->wiphy, "failed to alloc RX skbuff list\n"); pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma); return -ENOMEM; } @@ -1442,7 +1441,6 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index) txq->skb = kcalloc(MWL8K_TX_DESCS, sizeof(*txq->skb), GFP_KERNEL); if (txq->skb == NULL) { - wiphy_err(hw->wiphy, "failed to alloc TX skbuff list\n"); pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma); return -ENOMEM; } -- cgit v0.10.2 From 6a98dcf032106eceb6827e0a7cc667250683f762 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 7 Feb 2013 15:52:40 +0000 Subject: ipv6: fix a RCU warning in net/ipv6/ip6_flowlabel.c This patch fixes the following RCU warning: [ 51.680236] =============================== [ 51.681914] [ INFO: suspicious RCU usage. ] [ 51.683610] 3.8.0-rc6-next-20130206-sasha-00028-g83214f7-dirty #276 Tainted: G W [ 51.686703] ------------------------------- [ 51.688281] net/ipv6/ip6_flowlabel.c:671 suspicious rcu_dereference_check() usage! we should use rcu_dereference_bh() when we hold rcu_read_lock_bh(). Reported-by: Sasha Levin Cc: David S. Miller Cc: YOSHIFUJI Hideaki Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index ea42bf4..a7da2f4 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -65,13 +65,13 @@ static DEFINE_SPINLOCK(ip6_fl_lock); static DEFINE_SPINLOCK(ip6_sk_fl_lock); #define for_each_fl_rcu(hash, fl) \ - for (fl = rcu_dereference(fl_ht[(hash)]); \ + for (fl = rcu_dereference_bh(fl_ht[(hash)]); \ fl != NULL; \ - fl = rcu_dereference(fl->next)) + fl = rcu_dereference_bh(fl->next)) #define for_each_fl_continue_rcu(fl) \ - for (fl = rcu_dereference(fl->next); \ + for (fl = rcu_dereference_bh(fl->next); \ fl != NULL; \ - fl = rcu_dereference(fl->next)) + fl = rcu_dereference_bh(fl->next)) #define for_each_sk_fl_rcu(np, sfl) \ for (sfl = rcu_dereference_bh(np->ipv6_fl_list); \ -- cgit v0.10.2 From d527043040740f41192dfd71793f905a998ee4f6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 7 Feb 2013 16:02:57 +0000 Subject: macvlan: broadcast addr should be part of mc_filter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit cd431e738509e (macvlan: add multicast filter) forgot the broadcast case. Signed-off-by: Eric Dumazet Reported-by: Maciej Żenczykowski SIgned-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index f494da8..ce7c926 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -426,6 +426,9 @@ static void macvlan_set_mac_lists(struct net_device *dev) netdev_for_each_mc_addr(ha, dev) { __set_bit(mc_hash(ha->addr), filter); } + + __set_bit(mc_hash(dev->broadcast), filter); + bitmap_copy(vlan->mc_filter, filter, MACVLAN_MC_FILTER_SZ); } dev_uc_sync(vlan->lowerdev, dev); -- cgit v0.10.2 From 3807ff5899f892abb4f06747c245fd648a2acdc5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 7 Feb 2013 16:41:02 +0000 Subject: macvlan: add a salt to mc_hash() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some multicast addresses are common to all macvlans, so if a multicast message has a hash value collision, we have to deliver a copy to all macvlans, adding significant latency and possible packet drops if netdev_max_backlog limit is hit. Having a per macvlan hash function permits to reduce the impact of hash collisions. Suggested-by: Maciej Żenczykowski Signed-off-by: Eric Dumazet Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index ce7c926..e4b8078 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -127,10 +127,18 @@ static int macvlan_broadcast_one(struct sk_buff *skb, return vlan->receive(skb); } -static unsigned int mc_hash(const unsigned char *addr) +static u32 macvlan_hash_mix(const struct macvlan_dev *vlan) +{ + return (u32)(((unsigned long)vlan) >> L1_CACHE_SHIFT); +} + + +static unsigned int mc_hash(const struct macvlan_dev *vlan, + const unsigned char *addr) { u32 val = __get_unaligned_cpu32(addr + 2); + val ^= macvlan_hash_mix(vlan); return hash_32(val, MACVLAN_MC_FILTER_BITS); } @@ -145,7 +153,7 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; int err; - unsigned int hash = mc_hash(eth->h_dest); + unsigned int hash; if (skb->protocol == htons(ETH_P_PAUSE)) return; @@ -155,6 +163,7 @@ static void macvlan_broadcast(struct sk_buff *skb, if (vlan->dev == src || !(vlan->mode & mode)) continue; + hash = mc_hash(vlan, eth->h_dest); if (!test_bit(hash, vlan->mc_filter)) continue; nskb = skb_clone(skb, GFP_ATOMIC); @@ -424,10 +433,10 @@ static void macvlan_set_mac_lists(struct net_device *dev) bitmap_zero(filter, MACVLAN_MC_FILTER_SZ); netdev_for_each_mc_addr(ha, dev) { - __set_bit(mc_hash(ha->addr), filter); + __set_bit(mc_hash(vlan, ha->addr), filter); } - __set_bit(mc_hash(dev->broadcast), filter); + __set_bit(mc_hash(vlan, dev->broadcast), filter); bitmap_copy(vlan->mc_filter, filter, MACVLAN_MC_FILTER_SZ); } -- cgit v0.10.2 From 03536e23acd3706c0ec93d01dc8bef44dab1a860 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 7 Feb 2013 23:22:58 +0000 Subject: net: sctp: sctp_auth_make_key_vector: use sctp_auth_create_key In sctp_auth_make_key_vector, we allocate a temporary sctp_auth_bytes structure with kmalloc instead of the sctp_auth_create_key allocator. Change this to sctp_auth_create_key as it is the case everywhere else, so that we also can properly free it via sctp_auth_key_put. This makes it easier for future code changes in the structure and allocator itself, since a single API is consistently used for this purpose. Also, by using sctp_auth_create_key we're doing sanity checks over the arguments. Signed-off-by: Daniel Borkmann Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 94a12de..5ec7509 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -209,12 +209,10 @@ static struct sctp_auth_bytes *sctp_auth_make_key_vector( len = random_len + hmacs_len + chunks_len; - new = kmalloc(sizeof(struct sctp_auth_bytes) + len, gfp); + new = sctp_auth_create_key(len, gfp); if (!new) return NULL; - new->len = len; - memcpy(new->data, random, random_len); offset += random_len; @@ -353,8 +351,8 @@ static struct sctp_auth_bytes *sctp_auth_asoc_create_secret( secret = sctp_auth_asoc_set_secret(ep_key, first_vector, last_vector, gfp); out: - kfree(local_key_vector); - kfree(peer_key_vector); + sctp_auth_key_put(local_key_vector); + sctp_auth_key_put(peer_key_vector); return secret; } -- cgit v0.10.2 From 8b9a4d56866e0dca6ae886ed9bff777e50d0b70c Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Fri, 8 Feb 2013 02:49:51 +0000 Subject: cxgb4vf: Fix extraction of cpl_rx_pkt from the response queue descriptor This was preventing GRO and RxCheckSum offload to happen. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 92170d5..9e8841e1 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -1501,7 +1501,7 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp, const struct pkt_gl *gl) { struct sk_buff *skb; - const struct cpl_rx_pkt *pkt = (void *)&rsp[1]; + const struct cpl_rx_pkt *pkt = (void *)rsp; bool csum_ok = pkt->csum_calc && !pkt->err_vec; struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq); -- cgit v0.10.2 From d021c344051af91f42c5ba9fdedc176740cbd238 Mon Sep 17 00:00:00 2001 From: Andy King Date: Wed, 6 Feb 2013 14:23:56 +0000 Subject: VSOCK: Introduce VM Sockets VM Sockets allows communication between virtual machines and the hypervisor. User level applications both in a virtual machine and on the host can use the VM Sockets API, which facilitates fast and efficient communication between guest virtual machines and their host. A socket address family, designed to be compatible with UDP and TCP at the interface level, is provided. Today, VM Sockets is used by various VMware Tools components inside the guest for zero-config, network-less access to VMware host services. In addition to this, VMware's users are using VM Sockets for various applications, where network access of the virtual machine is restricted or non-existent. Examples of this are VMs communicating with device proxies for proprietary hardware running as host applications and automated testing of applications running within virtual machines. The VMware VM Sockets are similar to other socket types, like Berkeley UNIX socket interface. The VM Sockets module supports both connection-oriented stream sockets like TCP, and connectionless datagram sockets like UDP. The VM Sockets protocol family is defined as "AF_VSOCK" and the socket operations split for SOCK_DGRAM and SOCK_STREAM. For additional information about the use of VM Sockets, please refer to the VM Sockets Programming Guide available at: https://www.vmware.com/support/developer/vmci-sdk/ Signed-off-by: George Zhang Signed-off-by: Dmitry Torokhov Signed-off-by: Andy king Signed-off-by: David S. Miller diff --git a/include/linux/socket.h b/include/linux/socket.h index 9a546ff..2b9f74b 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -178,7 +178,8 @@ struct ucred { #define AF_CAIF 37 /* CAIF sockets */ #define AF_ALG 38 /* Algorithm sockets */ #define AF_NFC 39 /* NFC sockets */ -#define AF_MAX 40 /* For now.. */ +#define AF_VSOCK 40 /* vSockets */ +#define AF_MAX 41 /* For now.. */ /* Protocol families, same as address families. */ #define PF_UNSPEC AF_UNSPEC @@ -221,6 +222,7 @@ struct ucred { #define PF_CAIF AF_CAIF #define PF_ALG AF_ALG #define PF_NFC AF_NFC +#define PF_VSOCK AF_VSOCK #define PF_MAX AF_MAX /* Maximum queue length specifiable by listen. */ diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h new file mode 100644 index 0000000..f7f2e99 --- /dev/null +++ b/include/uapi/linux/vm_sockets.h @@ -0,0 +1,171 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _VM_SOCKETS_H_ +#define _VM_SOCKETS_H_ + +#if !defined(__KERNEL__) +#include +#endif + +/* Option name for STREAM socket buffer size. Use as the option name in + * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that + * specifies the size of the buffer underlying a vSockets STREAM socket. + * Value is clamped to the MIN and MAX. + */ + +#define SO_VM_SOCKETS_BUFFER_SIZE 0 + +/* Option name for STREAM socket minimum buffer size. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long that + * specifies the minimum size allowed for the buffer underlying a vSockets + * STREAM socket. + */ + +#define SO_VM_SOCKETS_BUFFER_MIN_SIZE 1 + +/* Option name for STREAM socket maximum buffer size. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long + * that specifies the maximum size allowed for the buffer underlying a + * vSockets STREAM socket. + */ + +#define SO_VM_SOCKETS_BUFFER_MAX_SIZE 2 + +/* Option name for socket peer's host-specific VM ID. Use as the option name + * in getsockopt(3) to get a host-specific identifier for the peer endpoint's + * VM. The identifier is a signed integer. + * Only available for hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_PEER_HOST_VM_ID 3 + +/* Option name for socket's service label. Use as the option name in + * setsockopt(3) or getsockopt(3) to set or get the service label for a socket. + * The service label is a C-style NUL-terminated string. Only available for + * hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_SERVICE_LABEL 4 + +/* Option name for determining if a socket is trusted. Use as the option name + * in getsockopt(3) to determine if a socket is trusted. The value is a + * signed integer. + */ + +#define SO_VM_SOCKETS_TRUSTED 5 + +/* Option name for STREAM socket connection timeout. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get the connection + * timeout for a STREAM socket. + */ + +#define SO_VM_SOCKETS_CONNECT_TIMEOUT 6 + +/* Option name for using non-blocking send/receive. Use as the option name + * for setsockopt(3) or getsockopt(3) to set or get the non-blocking + * transmit/receive flag for a STREAM socket. This flag determines whether + * send() and recv() can be called in non-blocking contexts for the given + * socket. The value is a signed integer. + * + * This option is only relevant to kernel endpoints, where descheduling the + * thread of execution is not allowed, for example, while holding a spinlock. + * It is not to be confused with conventional non-blocking socket operations. + * + * Only available for hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_NONBLOCK_TXRX 7 + +/* The vSocket equivalent of INADDR_ANY. This works for the svm_cid field of + * sockaddr_vm and indicates the context ID of the current endpoint. + */ + +#define VMADDR_CID_ANY -1U + +/* Bind to any available port. Works for the svm_port field of + * sockaddr_vm. + */ + +#define VMADDR_PORT_ANY -1U + +/* Use this as the destination CID in an address when referring to the + * hypervisor. VMCI relies on it being 0, but this would be useful for other + * transports too. + */ + +#define VMADDR_CID_HYPERVISOR 0 + +/* This CID is specific to VMCI and can be considered reserved (even VMCI + * doesn't use it anymore, it's a legacy value from an older release). + */ + +#define VMADDR_CID_RESERVED 1 + +/* Use this as the destination CID in an address when referring to the host + * (any process other than the hypervisor). VMCI relies on it being 2, but + * this would be useful for other transports too. + */ + +#define VMADDR_CID_HOST 2 + +/* Invalid vSockets version. */ + +#define VM_SOCKETS_INVALID_VERSION -1U + +/* The epoch (first) component of the vSockets version. A single byte + * representing the epoch component of the vSockets version. + */ + +#define VM_SOCKETS_VERSION_EPOCH(_v) (((_v) & 0xFF000000) >> 24) + +/* The major (second) component of the vSockets version. A single byte + * representing the major component of the vSockets version. Typically + * changes for every major release of a product. + */ + +#define VM_SOCKETS_VERSION_MAJOR(_v) (((_v) & 0x00FF0000) >> 16) + +/* The minor (third) component of the vSockets version. Two bytes representing + * the minor component of the vSockets version. + */ + +#define VM_SOCKETS_VERSION_MINOR(_v) (((_v) & 0x0000FFFF)) + +/* Address structure for vSockets. The address family should be set to + * whatever vmci_sock_get_af_value_fd() returns. The structure members should + * all align on their natural boundaries without resorting to compiler packing + * directives. The total size of this structure should be exactly the same as + * that of struct sockaddr. + */ + +struct sockaddr_vm { + sa_family_t svm_family; + unsigned short svm_reserved1; + unsigned int svm_port; + unsigned int svm_cid; + unsigned char svm_zero[sizeof(struct sockaddr) - + sizeof(sa_family_t) - + sizeof(unsigned short) - + sizeof(unsigned int) - sizeof(unsigned int)]; +}; + +#define IOCTL_VM_SOCKETS_GET_LOCAL_CID _IO(7, 0xb9) + +#if defined(__KERNEL__) +int vm_sockets_get_local_cid(void); +#endif + +#endif diff --git a/net/Kconfig b/net/Kconfig index c31348e..5a1888b 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -217,6 +217,7 @@ source "net/dcb/Kconfig" source "net/dns_resolver/Kconfig" source "net/batman-adv/Kconfig" source "net/openvswitch/Kconfig" +source "net/vmw_vsock/Kconfig" config RPS boolean diff --git a/net/Makefile b/net/Makefile index c5aa8b3..091e7b04 100644 --- a/net/Makefile +++ b/net/Makefile @@ -69,3 +69,4 @@ obj-$(CONFIG_CEPH_LIB) += ceph/ obj-$(CONFIG_BATMAN_ADV) += batman-adv/ obj-$(CONFIG_NFC) += nfc/ obj-$(CONFIG_OPENVSWITCH) += openvswitch/ +obj-$(CONFIG_VSOCKETS) += vmw_vsock/ diff --git a/net/vmw_vsock/Kconfig b/net/vmw_vsock/Kconfig new file mode 100644 index 0000000..b5fa7e4 --- /dev/null +++ b/net/vmw_vsock/Kconfig @@ -0,0 +1,28 @@ +# +# Vsock protocol +# + +config VSOCKETS + tristate "Virtual Socket protocol" + help + Virtual Socket Protocol is a socket protocol similar to TCP/IP + allowing comunication between Virtual Machines and hypervisor + or host. + + You should also select one or more hypervisor-specific transports + below. + + To compile this driver as a module, choose M here: the module + will be called vsock. If unsure, say N. + +config VMWARE_VMCI_VSOCKETS + tristate "VMware VMCI transport for Virtual Sockets" + depends on VSOCKETS && VMWARE_VMCI + help + This module implements a VMCI transport for Virtual Sockets. + + Enable this transport if your Virtual Machine runs on a VMware + hypervisor. + + To compile this driver as a module, choose M here: the module + will be called vmw_vsock_vmci_transport. If unsure, say N. diff --git a/net/vmw_vsock/Makefile b/net/vmw_vsock/Makefile new file mode 100644 index 0000000..2ce52d7 --- /dev/null +++ b/net/vmw_vsock/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_VSOCKETS) += vsock.o +obj-$(CONFIG_VMWARE_VMCI_VSOCKETS) += vmw_vsock_vmci_transport.o + +vsock-y += af_vsock.o vsock_addr.o + +vmw_vsock_vmci_transport-y += vmci_transport.o vmci_transport_notify.o \ + vmci_transport_notify_qstate.o diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c new file mode 100644 index 0000000..54bb7bd --- /dev/null +++ b/net/vmw_vsock/af_vsock.c @@ -0,0 +1,2015 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +/* Implementation notes: + * + * - There are two kinds of sockets: those created by user action (such as + * calling socket(2)) and those created by incoming connection request packets. + * + * - There are two "global" tables, one for bound sockets (sockets that have + * specified an address that they are responsible for) and one for connected + * sockets (sockets that have established a connection with another socket). + * These tables are "global" in that all sockets on the system are placed + * within them. - Note, though, that the bound table contains an extra entry + * for a list of unbound sockets and SOCK_DGRAM sockets will always remain in + * that list. The bound table is used solely for lookup of sockets when packets + * are received and that's not necessary for SOCK_DGRAM sockets since we create + * a datagram handle for each and need not perform a lookup. Keeping SOCK_DGRAM + * sockets out of the bound hash buckets will reduce the chance of collisions + * when looking for SOCK_STREAM sockets and prevents us from having to check the + * socket type in the hash table lookups. + * + * - Sockets created by user action will either be "client" sockets that + * initiate a connection or "server" sockets that listen for connections; we do + * not support simultaneous connects (two "client" sockets connecting). + * + * - "Server" sockets are referred to as listener sockets throughout this + * implementation because they are in the SS_LISTEN state. When a connection + * request is received (the second kind of socket mentioned above), we create a + * new socket and refer to it as a pending socket. These pending sockets are + * placed on the pending connection list of the listener socket. When future + * packets are received for the address the listener socket is bound to, we + * check if the source of the packet is from one that has an existing pending + * connection. If it does, we process the packet for the pending socket. When + * that socket reaches the connected state, it is removed from the listener + * socket's pending list and enqueued in the listener socket's accept queue. + * Callers of accept(2) will accept connected sockets from the listener socket's + * accept queue. If the socket cannot be accepted for some reason then it is + * marked rejected. Once the connection is accepted, it is owned by the user + * process and the responsibility for cleanup falls with that user process. + * + * - It is possible that these pending sockets will never reach the connected + * state; in fact, we may never receive another packet after the connection + * request. Because of this, we must schedule a cleanup function to run in the + * future, after some amount of time passes where a connection should have been + * established. This function ensures that the socket is off all lists so it + * cannot be retrieved, then drops all references to the socket so it is cleaned + * up (sock_put() -> sk_free() -> our sk_destruct implementation). Note this + * function will also cleanup rejected sockets, those that reach the connected + * state but leave it before they have been accepted. + * + * - Sockets created by user action will be cleaned up when the user process + * calls close(2), causing our release implementation to be called. Our release + * implementation will perform some cleanup then drop the last reference so our + * sk_destruct implementation is invoked. Our sk_destruct implementation will + * perform additional cleanup that's common for both types of sockets. + * + * - A socket's reference count is what ensures that the structure won't be + * freed. Each entry in a list (such as the "global" bound and connected tables + * and the listener socket's pending list and connected queue) ensures a + * reference. When we defer work until process context and pass a socket as our + * argument, we must ensure the reference count is increased to ensure the + * socket isn't freed before the function is run; the deferred function will + * then drop the reference. + */ + +#include + +#define EXPORT_SYMTAB +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "af_vsock.h" +#include "vsock_version.h" + +static int __vsock_bind(struct sock *sk, struct sockaddr_vm *addr); +static void vsock_sk_destruct(struct sock *sk); +static int vsock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb); + +/* Protocol family. */ +static struct proto vsock_proto = { + .name = "AF_VSOCK", + .owner = THIS_MODULE, + .obj_size = sizeof(struct vsock_sock), +}; + +/* The default peer timeout indicates how long we will wait for a peer response + * to a control message. + */ +#define VSOCK_DEFAULT_CONNECT_TIMEOUT (2 * HZ) + +#define SS_LISTEN 255 + +static const struct vsock_transport *transport; +static DEFINE_MUTEX(vsock_register_mutex); + +/**** EXPORTS ****/ + +/* Get the ID of the local context. This is transport dependent. */ + +int vm_sockets_get_local_cid(void) +{ + return transport->get_local_cid(); +} +EXPORT_SYMBOL_GPL(vm_sockets_get_local_cid); + +/**** UTILS ****/ + +/* Each bound VSocket is stored in the bind hash table and each connected + * VSocket is stored in the connected hash table. + * + * Unbound sockets are all put on the same list attached to the end of the hash + * table (vsock_unbound_sockets). Bound sockets are added to the hash table in + * the bucket that their local address hashes to (vsock_bound_sockets(addr) + * represents the list that addr hashes to). + * + * Specifically, we initialize the vsock_bind_table array to a size of + * VSOCK_HASH_SIZE + 1 so that vsock_bind_table[0] through + * vsock_bind_table[VSOCK_HASH_SIZE - 1] are for bound sockets and + * vsock_bind_table[VSOCK_HASH_SIZE] is for unbound sockets. The hash function + * mods with VSOCK_HASH_SIZE - 1 to ensure this. + */ +#define VSOCK_HASH_SIZE 251 +#define MAX_PORT_RETRIES 24 + +#define VSOCK_HASH(addr) ((addr)->svm_port % (VSOCK_HASH_SIZE - 1)) +#define vsock_bound_sockets(addr) (&vsock_bind_table[VSOCK_HASH(addr)]) +#define vsock_unbound_sockets (&vsock_bind_table[VSOCK_HASH_SIZE]) + +/* XXX This can probably be implemented in a better way. */ +#define VSOCK_CONN_HASH(src, dst) \ + (((src)->svm_cid ^ (dst)->svm_port) % (VSOCK_HASH_SIZE - 1)) +#define vsock_connected_sockets(src, dst) \ + (&vsock_connected_table[VSOCK_CONN_HASH(src, dst)]) +#define vsock_connected_sockets_vsk(vsk) \ + vsock_connected_sockets(&(vsk)->remote_addr, &(vsk)->local_addr) + +static struct list_head vsock_bind_table[VSOCK_HASH_SIZE + 1]; +static struct list_head vsock_connected_table[VSOCK_HASH_SIZE]; +static DEFINE_SPINLOCK(vsock_table_lock); + +static __init void vsock_init_tables(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vsock_bind_table); i++) + INIT_LIST_HEAD(&vsock_bind_table[i]); + + for (i = 0; i < ARRAY_SIZE(vsock_connected_table); i++) + INIT_LIST_HEAD(&vsock_connected_table[i]); +} + +static void __vsock_insert_bound(struct list_head *list, + struct vsock_sock *vsk) +{ + sock_hold(&vsk->sk); + list_add(&vsk->bound_table, list); +} + +static void __vsock_insert_connected(struct list_head *list, + struct vsock_sock *vsk) +{ + sock_hold(&vsk->sk); + list_add(&vsk->connected_table, list); +} + +static void __vsock_remove_bound(struct vsock_sock *vsk) +{ + list_del_init(&vsk->bound_table); + sock_put(&vsk->sk); +} + +static void __vsock_remove_connected(struct vsock_sock *vsk) +{ + list_del_init(&vsk->connected_table); + sock_put(&vsk->sk); +} + +static struct sock *__vsock_find_bound_socket(struct sockaddr_vm *addr) +{ + struct vsock_sock *vsk; + + list_for_each_entry(vsk, vsock_bound_sockets(addr), bound_table) + if (vsock_addr_equals_addr_any(addr, &vsk->local_addr)) + return sk_vsock(vsk); + + return NULL; +} + +static struct sock *__vsock_find_connected_socket(struct sockaddr_vm *src, + struct sockaddr_vm *dst) +{ + struct vsock_sock *vsk; + + list_for_each_entry(vsk, vsock_connected_sockets(src, dst), + connected_table) { + if (vsock_addr_equals_addr(src, &vsk->remote_addr) + && vsock_addr_equals_addr(dst, &vsk->local_addr)) { + return sk_vsock(vsk); + } + } + + return NULL; +} + +static bool __vsock_in_bound_table(struct vsock_sock *vsk) +{ + return !list_empty(&vsk->bound_table); +} + +static bool __vsock_in_connected_table(struct vsock_sock *vsk) +{ + return !list_empty(&vsk->connected_table); +} + +static void vsock_insert_unbound(struct vsock_sock *vsk) +{ + spin_lock_bh(&vsock_table_lock); + __vsock_insert_bound(vsock_unbound_sockets, vsk); + spin_unlock_bh(&vsock_table_lock); +} + +void vsock_insert_connected(struct vsock_sock *vsk) +{ + struct list_head *list = vsock_connected_sockets( + &vsk->remote_addr, &vsk->local_addr); + + spin_lock_bh(&vsock_table_lock); + __vsock_insert_connected(list, vsk); + spin_unlock_bh(&vsock_table_lock); +} +EXPORT_SYMBOL_GPL(vsock_insert_connected); + +void vsock_remove_bound(struct vsock_sock *vsk) +{ + spin_lock_bh(&vsock_table_lock); + __vsock_remove_bound(vsk); + spin_unlock_bh(&vsock_table_lock); +} +EXPORT_SYMBOL_GPL(vsock_remove_bound); + +void vsock_remove_connected(struct vsock_sock *vsk) +{ + spin_lock_bh(&vsock_table_lock); + __vsock_remove_connected(vsk); + spin_unlock_bh(&vsock_table_lock); +} +EXPORT_SYMBOL_GPL(vsock_remove_connected); + +struct sock *vsock_find_bound_socket(struct sockaddr_vm *addr) +{ + struct sock *sk; + + spin_lock_bh(&vsock_table_lock); + sk = __vsock_find_bound_socket(addr); + if (sk) + sock_hold(sk); + + spin_unlock_bh(&vsock_table_lock); + + return sk; +} +EXPORT_SYMBOL_GPL(vsock_find_bound_socket); + +struct sock *vsock_find_connected_socket(struct sockaddr_vm *src, + struct sockaddr_vm *dst) +{ + struct sock *sk; + + spin_lock_bh(&vsock_table_lock); + sk = __vsock_find_connected_socket(src, dst); + if (sk) + sock_hold(sk); + + spin_unlock_bh(&vsock_table_lock); + + return sk; +} +EXPORT_SYMBOL_GPL(vsock_find_connected_socket); + +static bool vsock_in_bound_table(struct vsock_sock *vsk) +{ + bool ret; + + spin_lock_bh(&vsock_table_lock); + ret = __vsock_in_bound_table(vsk); + spin_unlock_bh(&vsock_table_lock); + + return ret; +} + +static bool vsock_in_connected_table(struct vsock_sock *vsk) +{ + bool ret; + + spin_lock_bh(&vsock_table_lock); + ret = __vsock_in_connected_table(vsk); + spin_unlock_bh(&vsock_table_lock); + + return ret; +} + +void vsock_for_each_connected_socket(void (*fn)(struct sock *sk)) +{ + int i; + + spin_lock_bh(&vsock_table_lock); + + for (i = 0; i < ARRAY_SIZE(vsock_connected_table); i++) { + struct vsock_sock *vsk; + list_for_each_entry(vsk, &vsock_connected_table[i], + connected_table); + fn(sk_vsock(vsk)); + } + + spin_unlock_bh(&vsock_table_lock); +} +EXPORT_SYMBOL_GPL(vsock_for_each_connected_socket); + +void vsock_add_pending(struct sock *listener, struct sock *pending) +{ + struct vsock_sock *vlistener; + struct vsock_sock *vpending; + + vlistener = vsock_sk(listener); + vpending = vsock_sk(pending); + + sock_hold(pending); + sock_hold(listener); + list_add_tail(&vpending->pending_links, &vlistener->pending_links); +} +EXPORT_SYMBOL_GPL(vsock_add_pending); + +void vsock_remove_pending(struct sock *listener, struct sock *pending) +{ + struct vsock_sock *vpending = vsock_sk(pending); + + list_del_init(&vpending->pending_links); + sock_put(listener); + sock_put(pending); +} +EXPORT_SYMBOL_GPL(vsock_remove_pending); + +void vsock_enqueue_accept(struct sock *listener, struct sock *connected) +{ + struct vsock_sock *vlistener; + struct vsock_sock *vconnected; + + vlistener = vsock_sk(listener); + vconnected = vsock_sk(connected); + + sock_hold(connected); + sock_hold(listener); + list_add_tail(&vconnected->accept_queue, &vlistener->accept_queue); +} +EXPORT_SYMBOL_GPL(vsock_enqueue_accept); + +static struct sock *vsock_dequeue_accept(struct sock *listener) +{ + struct vsock_sock *vlistener; + struct vsock_sock *vconnected; + + vlistener = vsock_sk(listener); + + if (list_empty(&vlistener->accept_queue)) + return NULL; + + vconnected = list_entry(vlistener->accept_queue.next, + struct vsock_sock, accept_queue); + + list_del_init(&vconnected->accept_queue); + sock_put(listener); + /* The caller will need a reference on the connected socket so we let + * it call sock_put(). + */ + + return sk_vsock(vconnected); +} + +static bool vsock_is_accept_queue_empty(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + return list_empty(&vsk->accept_queue); +} + +static bool vsock_is_pending(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + return !list_empty(&vsk->pending_links); +} + +static int vsock_send_shutdown(struct sock *sk, int mode) +{ + return transport->shutdown(vsock_sk(sk), mode); +} + +void vsock_pending_work(struct work_struct *work) +{ + struct sock *sk; + struct sock *listener; + struct vsock_sock *vsk; + bool cleanup; + + vsk = container_of(work, struct vsock_sock, dwork.work); + sk = sk_vsock(vsk); + listener = vsk->listener; + cleanup = true; + + lock_sock(listener); + lock_sock(sk); + + if (vsock_is_pending(sk)) { + vsock_remove_pending(listener, sk); + } else if (!vsk->rejected) { + /* We are not on the pending list and accept() did not reject + * us, so we must have been accepted by our user process. We + * just need to drop our references to the sockets and be on + * our way. + */ + cleanup = false; + goto out; + } + + listener->sk_ack_backlog--; + + /* We need to remove ourself from the global connected sockets list so + * incoming packets can't find this socket, and to reduce the reference + * count. + */ + if (vsock_in_connected_table(vsk)) + vsock_remove_connected(vsk); + + sk->sk_state = SS_FREE; + +out: + release_sock(sk); + release_sock(listener); + if (cleanup) + sock_put(sk); + + sock_put(sk); + sock_put(listener); +} +EXPORT_SYMBOL_GPL(vsock_pending_work); + +/**** SOCKET OPERATIONS ****/ + +static int __vsock_bind_stream(struct vsock_sock *vsk, + struct sockaddr_vm *addr) +{ + static u32 port = LAST_RESERVED_PORT + 1; + struct sockaddr_vm new_addr; + + vsock_addr_init(&new_addr, addr->svm_cid, addr->svm_port); + + if (addr->svm_port == VMADDR_PORT_ANY) { + bool found = false; + unsigned int i; + + for (i = 0; i < MAX_PORT_RETRIES; i++) { + if (port <= LAST_RESERVED_PORT) + port = LAST_RESERVED_PORT + 1; + + new_addr.svm_port = port++; + + if (!__vsock_find_bound_socket(&new_addr)) { + found = true; + break; + } + } + + if (!found) + return -EADDRNOTAVAIL; + } else { + /* If port is in reserved range, ensure caller + * has necessary privileges. + */ + if (addr->svm_port <= LAST_RESERVED_PORT && + !capable(CAP_NET_BIND_SERVICE)) { + return -EACCES; + } + + if (__vsock_find_bound_socket(&new_addr)) + return -EADDRINUSE; + } + + vsock_addr_init(&vsk->local_addr, new_addr.svm_cid, new_addr.svm_port); + + /* Remove stream sockets from the unbound list and add them to the hash + * table for easy lookup by its address. The unbound list is simply an + * extra entry at the end of the hash table, a trick used by AF_UNIX. + */ + __vsock_remove_bound(vsk); + __vsock_insert_bound(vsock_bound_sockets(&vsk->local_addr), vsk); + + return 0; +} + +static int __vsock_bind_dgram(struct vsock_sock *vsk, + struct sockaddr_vm *addr) +{ + return transport->dgram_bind(vsk, addr); +} + +static int __vsock_bind(struct sock *sk, struct sockaddr_vm *addr) +{ + struct vsock_sock *vsk = vsock_sk(sk); + u32 cid; + int retval; + + /* First ensure this socket isn't already bound. */ + if (vsock_addr_bound(&vsk->local_addr)) + return -EINVAL; + + /* Now bind to the provided address or select appropriate values if + * none are provided (VMADDR_CID_ANY and VMADDR_PORT_ANY). Note that + * like AF_INET prevents binding to a non-local IP address (in most + * cases), we only allow binding to the local CID. + */ + cid = transport->get_local_cid(); + if (addr->svm_cid != cid && addr->svm_cid != VMADDR_CID_ANY) + return -EADDRNOTAVAIL; + + switch (sk->sk_socket->type) { + case SOCK_STREAM: + spin_lock_bh(&vsock_table_lock); + retval = __vsock_bind_stream(vsk, addr); + spin_unlock_bh(&vsock_table_lock); + break; + + case SOCK_DGRAM: + retval = __vsock_bind_dgram(vsk, addr); + break; + + default: + retval = -EINVAL; + break; + } + + return retval; +} + +struct sock *__vsock_create(struct net *net, + struct socket *sock, + struct sock *parent, + gfp_t priority, + unsigned short type) +{ + struct sock *sk; + struct vsock_sock *psk; + struct vsock_sock *vsk; + + sk = sk_alloc(net, AF_VSOCK, priority, &vsock_proto); + if (!sk) + return NULL; + + sock_init_data(sock, sk); + + /* sk->sk_type is normally set in sock_init_data, but only if sock is + * non-NULL. We make sure that our sockets always have a type by + * setting it here if needed. + */ + if (!sock) + sk->sk_type = type; + + vsk = vsock_sk(sk); + vsock_addr_init(&vsk->local_addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); + vsock_addr_init(&vsk->remote_addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); + + sk->sk_destruct = vsock_sk_destruct; + sk->sk_backlog_rcv = vsock_queue_rcv_skb; + sk->sk_state = 0; + sock_reset_flag(sk, SOCK_DONE); + + INIT_LIST_HEAD(&vsk->bound_table); + INIT_LIST_HEAD(&vsk->connected_table); + vsk->listener = NULL; + INIT_LIST_HEAD(&vsk->pending_links); + INIT_LIST_HEAD(&vsk->accept_queue); + vsk->rejected = false; + vsk->sent_request = false; + vsk->ignore_connecting_rst = false; + vsk->peer_shutdown = 0; + + psk = parent ? vsock_sk(parent) : NULL; + if (parent) { + vsk->trusted = psk->trusted; + vsk->owner = get_cred(psk->owner); + vsk->connect_timeout = psk->connect_timeout; + } else { + vsk->trusted = capable(CAP_NET_ADMIN); + vsk->owner = get_current_cred(); + vsk->connect_timeout = VSOCK_DEFAULT_CONNECT_TIMEOUT; + } + + if (transport->init(vsk, psk) < 0) { + sk_free(sk); + return NULL; + } + + if (sock) + vsock_insert_unbound(vsk); + + return sk; +} +EXPORT_SYMBOL_GPL(__vsock_create); + +static void __vsock_release(struct sock *sk) +{ + if (sk) { + struct sk_buff *skb; + struct sock *pending; + struct vsock_sock *vsk; + + vsk = vsock_sk(sk); + pending = NULL; /* Compiler warning. */ + + if (vsock_in_bound_table(vsk)) + vsock_remove_bound(vsk); + + if (vsock_in_connected_table(vsk)) + vsock_remove_connected(vsk); + + transport->release(vsk); + + lock_sock(sk); + sock_orphan(sk); + sk->sk_shutdown = SHUTDOWN_MASK; + + while ((skb = skb_dequeue(&sk->sk_receive_queue))) + kfree_skb(skb); + + /* Clean up any sockets that never were accepted. */ + while ((pending = vsock_dequeue_accept(sk)) != NULL) { + __vsock_release(pending); + sock_put(pending); + } + + release_sock(sk); + sock_put(sk); + } +} + +static void vsock_sk_destruct(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + transport->destruct(vsk); + + /* When clearing these addresses, there's no need to set the family and + * possibly register the address family with the kernel. + */ + vsock_addr_init(&vsk->local_addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); + vsock_addr_init(&vsk->remote_addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); + + put_cred(vsk->owner); +} + +static int vsock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) +{ + int err; + + err = sock_queue_rcv_skb(sk, skb); + if (err) + kfree_skb(skb); + + return err; +} + +s64 vsock_stream_has_data(struct vsock_sock *vsk) +{ + return transport->stream_has_data(vsk); +} +EXPORT_SYMBOL_GPL(vsock_stream_has_data); + +s64 vsock_stream_has_space(struct vsock_sock *vsk) +{ + return transport->stream_has_space(vsk); +} +EXPORT_SYMBOL_GPL(vsock_stream_has_space); + +static int vsock_release(struct socket *sock) +{ + __vsock_release(sock->sk); + sock->sk = NULL; + sock->state = SS_FREE; + + return 0; +} + +static int +vsock_bind(struct socket *sock, struct sockaddr *addr, int addr_len) +{ + int err; + struct sock *sk; + struct sockaddr_vm *vm_addr; + + sk = sock->sk; + + if (vsock_addr_cast(addr, addr_len, &vm_addr) != 0) + return -EINVAL; + + lock_sock(sk); + err = __vsock_bind(sk, vm_addr); + release_sock(sk); + + return err; +} + +static int vsock_getname(struct socket *sock, + struct sockaddr *addr, int *addr_len, int peer) +{ + int err; + struct sock *sk; + struct vsock_sock *vsk; + struct sockaddr_vm *vm_addr; + + sk = sock->sk; + vsk = vsock_sk(sk); + err = 0; + + lock_sock(sk); + + if (peer) { + if (sock->state != SS_CONNECTED) { + err = -ENOTCONN; + goto out; + } + vm_addr = &vsk->remote_addr; + } else { + vm_addr = &vsk->local_addr; + } + + if (!vm_addr) { + err = -EINVAL; + goto out; + } + + /* sys_getsockname() and sys_getpeername() pass us a + * MAX_SOCK_ADDR-sized buffer and don't set addr_len. Unfortunately + * that macro is defined in socket.c instead of .h, so we hardcode its + * value here. + */ + BUILD_BUG_ON(sizeof(*vm_addr) > 128); + memcpy(addr, vm_addr, sizeof(*vm_addr)); + *addr_len = sizeof(*vm_addr); + +out: + release_sock(sk); + return err; +} + +static int vsock_shutdown(struct socket *sock, int mode) +{ + int err; + struct sock *sk; + + /* User level uses SHUT_RD (0) and SHUT_WR (1), but the kernel uses + * RCV_SHUTDOWN (1) and SEND_SHUTDOWN (2), so we must increment mode + * here like the other address families do. Note also that the + * increment makes SHUT_RDWR (2) into RCV_SHUTDOWN | SEND_SHUTDOWN (3), + * which is what we want. + */ + mode++; + + if ((mode & ~SHUTDOWN_MASK) || !mode) + return -EINVAL; + + /* If this is a STREAM socket and it is not connected then bail out + * immediately. If it is a DGRAM socket then we must first kick the + * socket so that it wakes up from any sleeping calls, for example + * recv(), and then afterwards return the error. + */ + + sk = sock->sk; + if (sock->state == SS_UNCONNECTED) { + err = -ENOTCONN; + if (sk->sk_type == SOCK_STREAM) + return err; + } else { + sock->state = SS_DISCONNECTING; + err = 0; + } + + /* Receive and send shutdowns are treated alike. */ + mode = mode & (RCV_SHUTDOWN | SEND_SHUTDOWN); + if (mode) { + lock_sock(sk); + sk->sk_shutdown |= mode; + sk->sk_state_change(sk); + release_sock(sk); + + if (sk->sk_type == SOCK_STREAM) { + sock_reset_flag(sk, SOCK_DONE); + vsock_send_shutdown(sk, mode); + } + } + + return err; +} + +static unsigned int vsock_poll(struct file *file, struct socket *sock, + poll_table *wait) +{ + struct sock *sk; + unsigned int mask; + struct vsock_sock *vsk; + + sk = sock->sk; + vsk = vsock_sk(sk); + + poll_wait(file, sk_sleep(sk), wait); + mask = 0; + + if (sk->sk_err) + /* Signify that there has been an error on this socket. */ + mask |= POLLERR; + + /* INET sockets treat local write shutdown and peer write shutdown as a + * case of POLLHUP set. + */ + if ((sk->sk_shutdown == SHUTDOWN_MASK) || + ((sk->sk_shutdown & SEND_SHUTDOWN) && + (vsk->peer_shutdown & SEND_SHUTDOWN))) { + mask |= POLLHUP; + } + + if (sk->sk_shutdown & RCV_SHUTDOWN || + vsk->peer_shutdown & SEND_SHUTDOWN) { + mask |= POLLRDHUP; + } + + if (sock->type == SOCK_DGRAM) { + /* For datagram sockets we can read if there is something in + * the queue and write as long as the socket isn't shutdown for + * sending. + */ + if (!skb_queue_empty(&sk->sk_receive_queue) || + (sk->sk_shutdown & RCV_SHUTDOWN)) { + mask |= POLLIN | POLLRDNORM; + } + + if (!(sk->sk_shutdown & SEND_SHUTDOWN)) + mask |= POLLOUT | POLLWRNORM | POLLWRBAND; + + } else if (sock->type == SOCK_STREAM) { + lock_sock(sk); + + /* Listening sockets that have connections in their accept + * queue can be read. + */ + if (sk->sk_state == SS_LISTEN + && !vsock_is_accept_queue_empty(sk)) + mask |= POLLIN | POLLRDNORM; + + /* If there is something in the queue then we can read. */ + if (transport->stream_is_active(vsk) && + !(sk->sk_shutdown & RCV_SHUTDOWN)) { + bool data_ready_now = false; + int ret = transport->notify_poll_in( + vsk, 1, &data_ready_now); + if (ret < 0) { + mask |= POLLERR; + } else { + if (data_ready_now) + mask |= POLLIN | POLLRDNORM; + + } + } + + /* Sockets whose connections have been closed, reset, or + * terminated should also be considered read, and we check the + * shutdown flag for that. + */ + if (sk->sk_shutdown & RCV_SHUTDOWN || + vsk->peer_shutdown & SEND_SHUTDOWN) { + mask |= POLLIN | POLLRDNORM; + } + + /* Connected sockets that can produce data can be written. */ + if (sk->sk_state == SS_CONNECTED) { + if (!(sk->sk_shutdown & SEND_SHUTDOWN)) { + bool space_avail_now = false; + int ret = transport->notify_poll_out( + vsk, 1, &space_avail_now); + if (ret < 0) { + mask |= POLLERR; + } else { + if (space_avail_now) + /* Remove POLLWRBAND since INET + * sockets are not setting it. + */ + mask |= POLLOUT | POLLWRNORM; + + } + } + } + + /* Simulate INET socket poll behaviors, which sets + * POLLOUT|POLLWRNORM when peer is closed and nothing to read, + * but local send is not shutdown. + */ + if (sk->sk_state == SS_UNCONNECTED) { + if (!(sk->sk_shutdown & SEND_SHUTDOWN)) + mask |= POLLOUT | POLLWRNORM; + + } + + release_sock(sk); + } + + return mask; +} + +static int vsock_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, + struct msghdr *msg, size_t len) +{ + int err; + struct sock *sk; + struct vsock_sock *vsk; + struct sockaddr_vm *remote_addr; + + if (msg->msg_flags & MSG_OOB) + return -EOPNOTSUPP; + + /* For now, MSG_DONTWAIT is always assumed... */ + err = 0; + sk = sock->sk; + vsk = vsock_sk(sk); + + lock_sock(sk); + + if (!vsock_addr_bound(&vsk->local_addr)) { + struct sockaddr_vm local_addr; + + vsock_addr_init(&local_addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); + err = __vsock_bind(sk, &local_addr); + if (err != 0) + goto out; + + } + + /* If the provided message contains an address, use that. Otherwise + * fall back on the socket's remote handle (if it has been connected). + */ + if (msg->msg_name && + vsock_addr_cast(msg->msg_name, msg->msg_namelen, + &remote_addr) == 0) { + /* Ensure this address is of the right type and is a valid + * destination. + */ + + if (remote_addr->svm_cid == VMADDR_CID_ANY) + remote_addr->svm_cid = transport->get_local_cid(); + + if (!vsock_addr_bound(remote_addr)) { + err = -EINVAL; + goto out; + } + } else if (sock->state == SS_CONNECTED) { + remote_addr = &vsk->remote_addr; + + if (remote_addr->svm_cid == VMADDR_CID_ANY) + remote_addr->svm_cid = transport->get_local_cid(); + + /* XXX Should connect() or this function ensure remote_addr is + * bound? + */ + if (!vsock_addr_bound(&vsk->remote_addr)) { + err = -EINVAL; + goto out; + } + } else { + err = -EINVAL; + goto out; + } + + if (!transport->dgram_allow(remote_addr->svm_cid, + remote_addr->svm_port)) { + err = -EINVAL; + goto out; + } + + err = transport->dgram_enqueue(vsk, remote_addr, msg->msg_iov, len); + +out: + release_sock(sk); + return err; +} + +static int vsock_dgram_connect(struct socket *sock, + struct sockaddr *addr, int addr_len, int flags) +{ + int err; + struct sock *sk; + struct vsock_sock *vsk; + struct sockaddr_vm *remote_addr; + + sk = sock->sk; + vsk = vsock_sk(sk); + + err = vsock_addr_cast(addr, addr_len, &remote_addr); + if (err == -EAFNOSUPPORT && remote_addr->svm_family == AF_UNSPEC) { + lock_sock(sk); + vsock_addr_init(&vsk->remote_addr, VMADDR_CID_ANY, + VMADDR_PORT_ANY); + sock->state = SS_UNCONNECTED; + release_sock(sk); + return 0; + } else if (err != 0) + return -EINVAL; + + lock_sock(sk); + + if (!vsock_addr_bound(&vsk->local_addr)) { + struct sockaddr_vm local_addr; + + vsock_addr_init(&local_addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); + err = __vsock_bind(sk, &local_addr); + if (err != 0) + goto out; + + } + + if (!transport->dgram_allow(remote_addr->svm_cid, + remote_addr->svm_port)) { + err = -EINVAL; + goto out; + } + + memcpy(&vsk->remote_addr, remote_addr, sizeof(vsk->remote_addr)); + sock->state = SS_CONNECTED; + +out: + release_sock(sk); + return err; +} + +static int vsock_dgram_recvmsg(struct kiocb *kiocb, struct socket *sock, + struct msghdr *msg, size_t len, int flags) +{ + return transport->dgram_dequeue(kiocb, vsock_sk(sock->sk), msg, len, + flags); +} + +static const struct proto_ops vsock_dgram_ops = { + .family = PF_VSOCK, + .owner = THIS_MODULE, + .release = vsock_release, + .bind = vsock_bind, + .connect = vsock_dgram_connect, + .socketpair = sock_no_socketpair, + .accept = sock_no_accept, + .getname = vsock_getname, + .poll = vsock_poll, + .ioctl = sock_no_ioctl, + .listen = sock_no_listen, + .shutdown = vsock_shutdown, + .setsockopt = sock_no_setsockopt, + .getsockopt = sock_no_getsockopt, + .sendmsg = vsock_dgram_sendmsg, + .recvmsg = vsock_dgram_recvmsg, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; + +static void vsock_connect_timeout(struct work_struct *work) +{ + struct sock *sk; + struct vsock_sock *vsk; + + vsk = container_of(work, struct vsock_sock, dwork.work); + sk = sk_vsock(vsk); + + lock_sock(sk); + if (sk->sk_state == SS_CONNECTING && + (sk->sk_shutdown != SHUTDOWN_MASK)) { + sk->sk_state = SS_UNCONNECTED; + sk->sk_err = ETIMEDOUT; + sk->sk_error_report(sk); + } + release_sock(sk); + + sock_put(sk); +} + +static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr, + int addr_len, int flags) +{ + int err; + struct sock *sk; + struct vsock_sock *vsk; + struct sockaddr_vm *remote_addr; + long timeout; + DEFINE_WAIT(wait); + + err = 0; + sk = sock->sk; + vsk = vsock_sk(sk); + + lock_sock(sk); + + /* XXX AF_UNSPEC should make us disconnect like AF_INET. */ + switch (sock->state) { + case SS_CONNECTED: + err = -EISCONN; + goto out; + case SS_DISCONNECTING: + err = -EINVAL; + goto out; + case SS_CONNECTING: + /* This continues on so we can move sock into the SS_CONNECTED + * state once the connection has completed (at which point err + * will be set to zero also). Otherwise, we will either wait + * for the connection or return -EALREADY should this be a + * non-blocking call. + */ + err = -EALREADY; + break; + default: + if ((sk->sk_state == SS_LISTEN) || + vsock_addr_cast(addr, addr_len, &remote_addr) != 0) { + err = -EINVAL; + goto out; + } + + /* The hypervisor and well-known contexts do not have socket + * endpoints. + */ + if (!transport->stream_allow(remote_addr->svm_cid, + remote_addr->svm_port)) { + err = -ENETUNREACH; + goto out; + } + + /* Set the remote address that we are connecting to. */ + memcpy(&vsk->remote_addr, remote_addr, + sizeof(vsk->remote_addr)); + + /* Autobind this socket to the local address if necessary. */ + if (!vsock_addr_bound(&vsk->local_addr)) { + struct sockaddr_vm local_addr; + + vsock_addr_init(&local_addr, VMADDR_CID_ANY, + VMADDR_PORT_ANY); + err = __vsock_bind(sk, &local_addr); + if (err != 0) + goto out; + + } + + sk->sk_state = SS_CONNECTING; + + err = transport->connect(vsk); + if (err < 0) + goto out; + + /* Mark sock as connecting and set the error code to in + * progress in case this is a non-blocking connect. + */ + sock->state = SS_CONNECTING; + err = -EINPROGRESS; + } + + /* The receive path will handle all communication until we are able to + * enter the connected state. Here we wait for the connection to be + * completed or a notification of an error. + */ + timeout = vsk->connect_timeout; + prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + + while (sk->sk_state != SS_CONNECTED && sk->sk_err == 0) { + if (flags & O_NONBLOCK) { + /* If we're not going to block, we schedule a timeout + * function to generate a timeout on the connection + * attempt, in case the peer doesn't respond in a + * timely manner. We hold on to the socket until the + * timeout fires. + */ + sock_hold(sk); + INIT_DELAYED_WORK(&vsk->dwork, + vsock_connect_timeout); + schedule_delayed_work(&vsk->dwork, timeout); + + /* Skip ahead to preserve error code set above. */ + goto out_wait; + } + + release_sock(sk); + timeout = schedule_timeout(timeout); + lock_sock(sk); + + if (signal_pending(current)) { + err = sock_intr_errno(timeout); + goto out_wait_error; + } else if (timeout == 0) { + err = -ETIMEDOUT; + goto out_wait_error; + } + + prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + } + + if (sk->sk_err) { + err = -sk->sk_err; + goto out_wait_error; + } else + err = 0; + +out_wait: + finish_wait(sk_sleep(sk), &wait); +out: + release_sock(sk); + return err; + +out_wait_error: + sk->sk_state = SS_UNCONNECTED; + sock->state = SS_UNCONNECTED; + goto out_wait; +} + +static int vsock_accept(struct socket *sock, struct socket *newsock, int flags) +{ + struct sock *listener; + int err; + struct sock *connected; + struct vsock_sock *vconnected; + long timeout; + DEFINE_WAIT(wait); + + err = 0; + listener = sock->sk; + + lock_sock(listener); + + if (sock->type != SOCK_STREAM) { + err = -EOPNOTSUPP; + goto out; + } + + if (listener->sk_state != SS_LISTEN) { + err = -EINVAL; + goto out; + } + + /* Wait for children sockets to appear; these are the new sockets + * created upon connection establishment. + */ + timeout = sock_sndtimeo(listener, flags & O_NONBLOCK); + prepare_to_wait(sk_sleep(listener), &wait, TASK_INTERRUPTIBLE); + + while ((connected = vsock_dequeue_accept(listener)) == NULL && + listener->sk_err == 0) { + release_sock(listener); + timeout = schedule_timeout(timeout); + lock_sock(listener); + + if (signal_pending(current)) { + err = sock_intr_errno(timeout); + goto out_wait; + } else if (timeout == 0) { + err = -EAGAIN; + goto out_wait; + } + + prepare_to_wait(sk_sleep(listener), &wait, TASK_INTERRUPTIBLE); + } + + if (listener->sk_err) + err = -listener->sk_err; + + if (connected) { + listener->sk_ack_backlog--; + + lock_sock(connected); + vconnected = vsock_sk(connected); + + /* If the listener socket has received an error, then we should + * reject this socket and return. Note that we simply mark the + * socket rejected, drop our reference, and let the cleanup + * function handle the cleanup; the fact that we found it in + * the listener's accept queue guarantees that the cleanup + * function hasn't run yet. + */ + if (err) { + vconnected->rejected = true; + release_sock(connected); + sock_put(connected); + goto out_wait; + } + + newsock->state = SS_CONNECTED; + sock_graft(connected, newsock); + release_sock(connected); + sock_put(connected); + } + +out_wait: + finish_wait(sk_sleep(listener), &wait); +out: + release_sock(listener); + return err; +} + +static int vsock_listen(struct socket *sock, int backlog) +{ + int err; + struct sock *sk; + struct vsock_sock *vsk; + + sk = sock->sk; + + lock_sock(sk); + + if (sock->type != SOCK_STREAM) { + err = -EOPNOTSUPP; + goto out; + } + + if (sock->state != SS_UNCONNECTED) { + err = -EINVAL; + goto out; + } + + vsk = vsock_sk(sk); + + if (!vsock_addr_bound(&vsk->local_addr)) { + err = -EINVAL; + goto out; + } + + sk->sk_max_ack_backlog = backlog; + sk->sk_state = SS_LISTEN; + + err = 0; + +out: + release_sock(sk); + return err; +} + +static int vsock_stream_setsockopt(struct socket *sock, + int level, + int optname, + char __user *optval, + unsigned int optlen) +{ + int err; + struct sock *sk; + struct vsock_sock *vsk; + u64 val; + + if (level != AF_VSOCK) + return -ENOPROTOOPT; + +#define COPY_IN(_v) \ + do { \ + if (optlen < sizeof(_v)) { \ + err = -EINVAL; \ + goto exit; \ + } \ + if (copy_from_user(&_v, optval, sizeof(_v)) != 0) { \ + err = -EFAULT; \ + goto exit; \ + } \ + } while (0) + + err = 0; + sk = sock->sk; + vsk = vsock_sk(sk); + + lock_sock(sk); + + switch (optname) { + case SO_VM_SOCKETS_BUFFER_SIZE: + COPY_IN(val); + transport->set_buffer_size(vsk, val); + break; + + case SO_VM_SOCKETS_BUFFER_MAX_SIZE: + COPY_IN(val); + transport->set_max_buffer_size(vsk, val); + break; + + case SO_VM_SOCKETS_BUFFER_MIN_SIZE: + COPY_IN(val); + transport->set_min_buffer_size(vsk, val); + break; + + case SO_VM_SOCKETS_CONNECT_TIMEOUT: { + struct timeval tv; + COPY_IN(tv); + if (tv.tv_sec >= 0 && tv.tv_usec < USEC_PER_SEC && + tv.tv_sec < (MAX_SCHEDULE_TIMEOUT / HZ - 1)) { + vsk->connect_timeout = tv.tv_sec * HZ + + DIV_ROUND_UP(tv.tv_usec, (1000000 / HZ)); + if (vsk->connect_timeout == 0) + vsk->connect_timeout = + VSOCK_DEFAULT_CONNECT_TIMEOUT; + + } else { + err = -ERANGE; + } + break; + } + + default: + err = -ENOPROTOOPT; + break; + } + +#undef COPY_IN + +exit: + release_sock(sk); + return err; +} + +static int vsock_stream_getsockopt(struct socket *sock, + int level, int optname, + char __user *optval, + int __user *optlen) +{ + int err; + int len; + struct sock *sk; + struct vsock_sock *vsk; + u64 val; + + if (level != AF_VSOCK) + return -ENOPROTOOPT; + + err = get_user(len, optlen); + if (err != 0) + return err; + +#define COPY_OUT(_v) \ + do { \ + if (len < sizeof(_v)) \ + return -EINVAL; \ + \ + len = sizeof(_v); \ + if (copy_to_user(optval, &_v, len) != 0) \ + return -EFAULT; \ + \ + } while (0) + + err = 0; + sk = sock->sk; + vsk = vsock_sk(sk); + + switch (optname) { + case SO_VM_SOCKETS_BUFFER_SIZE: + val = transport->get_buffer_size(vsk); + COPY_OUT(val); + break; + + case SO_VM_SOCKETS_BUFFER_MAX_SIZE: + val = transport->get_max_buffer_size(vsk); + COPY_OUT(val); + break; + + case SO_VM_SOCKETS_BUFFER_MIN_SIZE: + val = transport->get_min_buffer_size(vsk); + COPY_OUT(val); + break; + + case SO_VM_SOCKETS_CONNECT_TIMEOUT: { + struct timeval tv; + tv.tv_sec = vsk->connect_timeout / HZ; + tv.tv_usec = + (vsk->connect_timeout - + tv.tv_sec * HZ) * (1000000 / HZ); + COPY_OUT(tv); + break; + } + default: + return -ENOPROTOOPT; + } + + err = put_user(len, optlen); + if (err != 0) + return -EFAULT; + +#undef COPY_OUT + + return 0; +} + +static int vsock_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, + struct msghdr *msg, size_t len) +{ + struct sock *sk; + struct vsock_sock *vsk; + ssize_t total_written; + long timeout; + int err; + struct vsock_transport_send_notify_data send_data; + + DEFINE_WAIT(wait); + + sk = sock->sk; + vsk = vsock_sk(sk); + total_written = 0; + err = 0; + + if (msg->msg_flags & MSG_OOB) + return -EOPNOTSUPP; + + lock_sock(sk); + + /* Callers should not provide a destination with stream sockets. */ + if (msg->msg_namelen) { + err = sk->sk_state == SS_CONNECTED ? -EISCONN : -EOPNOTSUPP; + goto out; + } + + /* Send data only if both sides are not shutdown in the direction. */ + if (sk->sk_shutdown & SEND_SHUTDOWN || + vsk->peer_shutdown & RCV_SHUTDOWN) { + err = -EPIPE; + goto out; + } + + if (sk->sk_state != SS_CONNECTED || + !vsock_addr_bound(&vsk->local_addr)) { + err = -ENOTCONN; + goto out; + } + + if (!vsock_addr_bound(&vsk->remote_addr)) { + err = -EDESTADDRREQ; + goto out; + } + + /* Wait for room in the produce queue to enqueue our user's data. */ + timeout = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT); + + err = transport->notify_send_init(vsk, &send_data); + if (err < 0) + goto out; + + prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + + while (total_written < len) { + ssize_t written; + + while (vsock_stream_has_space(vsk) == 0 && + sk->sk_err == 0 && + !(sk->sk_shutdown & SEND_SHUTDOWN) && + !(vsk->peer_shutdown & RCV_SHUTDOWN)) { + + /* Don't wait for non-blocking sockets. */ + if (timeout == 0) { + err = -EAGAIN; + goto out_wait; + } + + err = transport->notify_send_pre_block(vsk, &send_data); + if (err < 0) + goto out_wait; + + release_sock(sk); + timeout = schedule_timeout(timeout); + lock_sock(sk); + if (signal_pending(current)) { + err = sock_intr_errno(timeout); + goto out_wait; + } else if (timeout == 0) { + err = -EAGAIN; + goto out_wait; + } + + prepare_to_wait(sk_sleep(sk), &wait, + TASK_INTERRUPTIBLE); + } + + /* These checks occur both as part of and after the loop + * conditional since we need to check before and after + * sleeping. + */ + if (sk->sk_err) { + err = -sk->sk_err; + goto out_wait; + } else if ((sk->sk_shutdown & SEND_SHUTDOWN) || + (vsk->peer_shutdown & RCV_SHUTDOWN)) { + err = -EPIPE; + goto out_wait; + } + + err = transport->notify_send_pre_enqueue(vsk, &send_data); + if (err < 0) + goto out_wait; + + /* Note that enqueue will only write as many bytes as are free + * in the produce queue, so we don't need to ensure len is + * smaller than the queue size. It is the caller's + * responsibility to check how many bytes we were able to send. + */ + + written = transport->stream_enqueue( + vsk, msg->msg_iov, + len - total_written); + if (written < 0) { + err = -ENOMEM; + goto out_wait; + } + + total_written += written; + + err = transport->notify_send_post_enqueue( + vsk, written, &send_data); + if (err < 0) + goto out_wait; + + } + +out_wait: + if (total_written > 0) + err = total_written; + finish_wait(sk_sleep(sk), &wait); +out: + release_sock(sk); + return err; +} + + +static int +vsock_stream_recvmsg(struct kiocb *kiocb, + struct socket *sock, + struct msghdr *msg, size_t len, int flags) +{ + struct sock *sk; + struct vsock_sock *vsk; + int err; + size_t target; + ssize_t copied; + long timeout; + struct vsock_transport_recv_notify_data recv_data; + + DEFINE_WAIT(wait); + + sk = sock->sk; + vsk = vsock_sk(sk); + err = 0; + + lock_sock(sk); + + if (sk->sk_state != SS_CONNECTED) { + /* Recvmsg is supposed to return 0 if a peer performs an + * orderly shutdown. Differentiate between that case and when a + * peer has not connected or a local shutdown occured with the + * SOCK_DONE flag. + */ + if (sock_flag(sk, SOCK_DONE)) + err = 0; + else + err = -ENOTCONN; + + goto out; + } + + if (flags & MSG_OOB) { + err = -EOPNOTSUPP; + goto out; + } + + /* We don't check peer_shutdown flag here since peer may actually shut + * down, but there can be data in the queue that a local socket can + * receive. + */ + if (sk->sk_shutdown & RCV_SHUTDOWN) { + err = 0; + goto out; + } + + /* It is valid on Linux to pass in a zero-length receive buffer. This + * is not an error. We may as well bail out now. + */ + if (!len) { + err = 0; + goto out; + } + + /* We must not copy less than target bytes into the user's buffer + * before returning successfully, so we wait for the consume queue to + * have that much data to consume before dequeueing. Note that this + * makes it impossible to handle cases where target is greater than the + * queue size. + */ + target = sock_rcvlowat(sk, flags & MSG_WAITALL, len); + if (target >= transport->stream_rcvhiwat(vsk)) { + err = -ENOMEM; + goto out; + } + timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); + copied = 0; + + err = transport->notify_recv_init(vsk, target, &recv_data); + if (err < 0) + goto out; + + prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + + while (1) { + s64 ready = vsock_stream_has_data(vsk); + + if (ready < 0) { + /* Invalid queue pair content. XXX This should be + * changed to a connection reset in a later change. + */ + + err = -ENOMEM; + goto out_wait; + } else if (ready > 0) { + ssize_t read; + + err = transport->notify_recv_pre_dequeue( + vsk, target, &recv_data); + if (err < 0) + break; + + read = transport->stream_dequeue( + vsk, msg->msg_iov, + len - copied, flags); + if (read < 0) { + err = -ENOMEM; + break; + } + + copied += read; + + err = transport->notify_recv_post_dequeue( + vsk, target, read, + !(flags & MSG_PEEK), &recv_data); + if (err < 0) + goto out_wait; + + if (read >= target || flags & MSG_PEEK) + break; + + target -= read; + } else { + if (sk->sk_err != 0 || (sk->sk_shutdown & RCV_SHUTDOWN) + || (vsk->peer_shutdown & SEND_SHUTDOWN)) { + break; + } + /* Don't wait for non-blocking sockets. */ + if (timeout == 0) { + err = -EAGAIN; + break; + } + + err = transport->notify_recv_pre_block( + vsk, target, &recv_data); + if (err < 0) + break; + + release_sock(sk); + timeout = schedule_timeout(timeout); + lock_sock(sk); + + if (signal_pending(current)) { + err = sock_intr_errno(timeout); + break; + } else if (timeout == 0) { + err = -EAGAIN; + break; + } + + prepare_to_wait(sk_sleep(sk), &wait, + TASK_INTERRUPTIBLE); + } + } + + if (sk->sk_err) + err = -sk->sk_err; + else if (sk->sk_shutdown & RCV_SHUTDOWN) + err = 0; + + if (copied > 0) { + /* We only do these additional bookkeeping/notification steps + * if we actually copied something out of the queue pair + * instead of just peeking ahead. + */ + + if (!(flags & MSG_PEEK)) { + /* If the other side has shutdown for sending and there + * is nothing more to read, then modify the socket + * state. + */ + if (vsk->peer_shutdown & SEND_SHUTDOWN) { + if (vsock_stream_has_data(vsk) <= 0) { + sk->sk_state = SS_UNCONNECTED; + sock_set_flag(sk, SOCK_DONE); + sk->sk_state_change(sk); + } + } + } + err = copied; + } + +out_wait: + finish_wait(sk_sleep(sk), &wait); +out: + release_sock(sk); + return err; +} + +static const struct proto_ops vsock_stream_ops = { + .family = PF_VSOCK, + .owner = THIS_MODULE, + .release = vsock_release, + .bind = vsock_bind, + .connect = vsock_stream_connect, + .socketpair = sock_no_socketpair, + .accept = vsock_accept, + .getname = vsock_getname, + .poll = vsock_poll, + .ioctl = sock_no_ioctl, + .listen = vsock_listen, + .shutdown = vsock_shutdown, + .setsockopt = vsock_stream_setsockopt, + .getsockopt = vsock_stream_getsockopt, + .sendmsg = vsock_stream_sendmsg, + .recvmsg = vsock_stream_recvmsg, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; + +static int vsock_create(struct net *net, struct socket *sock, + int protocol, int kern) +{ + if (!sock) + return -EINVAL; + + if (protocol) + return -EPROTONOSUPPORT; + + switch (sock->type) { + case SOCK_DGRAM: + sock->ops = &vsock_dgram_ops; + break; + case SOCK_STREAM: + sock->ops = &vsock_stream_ops; + break; + default: + return -ESOCKTNOSUPPORT; + } + + sock->state = SS_UNCONNECTED; + + return __vsock_create(net, sock, NULL, GFP_KERNEL, 0) ? 0 : -ENOMEM; +} + +static const struct net_proto_family vsock_family_ops = { + .family = AF_VSOCK, + .create = vsock_create, + .owner = THIS_MODULE, +}; + +static long vsock_dev_do_ioctl(struct file *filp, + unsigned int cmd, void __user *ptr) +{ + u32 __user *p = ptr; + int retval = 0; + + switch (cmd) { + case IOCTL_VM_SOCKETS_GET_LOCAL_CID: + if (put_user(transport->get_local_cid(), p) != 0) + retval = -EFAULT; + break; + + default: + pr_err("Unknown ioctl %d\n", cmd); + retval = -EINVAL; + } + + return retval; +} + +static long vsock_dev_ioctl(struct file *filp, + unsigned int cmd, unsigned long arg) +{ + return vsock_dev_do_ioctl(filp, cmd, (void __user *)arg); +} + +#ifdef CONFIG_COMPAT +static long vsock_dev_compat_ioctl(struct file *filp, + unsigned int cmd, unsigned long arg) +{ + return vsock_dev_do_ioctl(filp, cmd, compat_ptr(arg)); +} +#endif + +static const struct file_operations vsock_device_ops = { + .owner = THIS_MODULE, + .unlocked_ioctl = vsock_dev_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vsock_dev_compat_ioctl, +#endif + .open = nonseekable_open, +}; + +static struct miscdevice vsock_device = { + .name = "vsock", + .minor = MISC_DYNAMIC_MINOR, + .fops = &vsock_device_ops, +}; + +static int __vsock_core_init(void) +{ + int err; + + vsock_init_tables(); + + err = misc_register(&vsock_device); + if (err) { + pr_err("Failed to register misc device\n"); + return -ENOENT; + } + + err = proto_register(&vsock_proto, 1); /* we want our slab */ + if (err) { + pr_err("Cannot register vsock protocol\n"); + goto err_misc_deregister; + } + + err = sock_register(&vsock_family_ops); + if (err) { + pr_err("could not register af_vsock (%d) address family: %d\n", + AF_VSOCK, err); + goto err_unregister_proto; + } + + return 0; + +err_unregister_proto: + proto_unregister(&vsock_proto); +err_misc_deregister: + misc_deregister(&vsock_device); + return err; +} + +int vsock_core_init(const struct vsock_transport *t) +{ + int retval = mutex_lock_interruptible(&vsock_register_mutex); + if (retval) + return retval; + + if (transport) { + retval = -EBUSY; + goto out; + } + + transport = t; + retval = __vsock_core_init(); + if (retval) + transport = NULL; + +out: + mutex_unlock(&vsock_register_mutex); + return retval; +} +EXPORT_SYMBOL_GPL(vsock_core_init); + +void vsock_core_exit(void) +{ + mutex_lock(&vsock_register_mutex); + + misc_deregister(&vsock_device); + sock_unregister(AF_VSOCK); + proto_unregister(&vsock_proto); + + /* We do not want the assignment below re-ordered. */ + mb(); + transport = NULL; + + mutex_unlock(&vsock_register_mutex); +} +EXPORT_SYMBOL_GPL(vsock_core_exit); + +MODULE_AUTHOR("VMware, Inc."); +MODULE_DESCRIPTION("VMware Virtual Socket Family"); +MODULE_VERSION(VSOCK_DRIVER_VERSION_STRING); +MODULE_LICENSE("GPL v2"); diff --git a/net/vmw_vsock/af_vsock.h b/net/vmw_vsock/af_vsock.h new file mode 100644 index 0000000..7d64d36 --- /dev/null +++ b/net/vmw_vsock/af_vsock.h @@ -0,0 +1,175 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __AF_VSOCK_H__ +#define __AF_VSOCK_H__ + +#include +#include +#include + +#include "vsock_addr.h" + +#define LAST_RESERVED_PORT 1023 + +#define vsock_sk(__sk) ((struct vsock_sock *)__sk) +#define sk_vsock(__vsk) (&(__vsk)->sk) + +struct vsock_sock { + /* sk must be the first member. */ + struct sock sk; + struct sockaddr_vm local_addr; + struct sockaddr_vm remote_addr; + /* Links for the global tables of bound and connected sockets. */ + struct list_head bound_table; + struct list_head connected_table; + /* Accessed without the socket lock held. This means it can never be + * modified outsided of socket create or destruct. + */ + bool trusted; + bool cached_peer_allow_dgram; /* Dgram communication allowed to + * cached peer? + */ + u32 cached_peer; /* Context ID of last dgram destination check. */ + const struct cred *owner; + /* Rest are SOCK_STREAM only. */ + long connect_timeout; + /* Listening socket that this came from. */ + struct sock *listener; + /* Used for pending list and accept queue during connection handshake. + * The listening socket is the head for both lists. Sockets created + * for connection requests are placed in the pending list until they + * are connected, at which point they are put in the accept queue list + * so they can be accepted in accept(). If accept() cannot accept the + * connection, it is marked as rejected so the cleanup function knows + * to clean up the socket. + */ + struct list_head pending_links; + struct list_head accept_queue; + bool rejected; + struct delayed_work dwork; + u32 peer_shutdown; + bool sent_request; + bool ignore_connecting_rst; + + /* Private to transport. */ + void *trans; +}; + +s64 vsock_stream_has_data(struct vsock_sock *vsk); +s64 vsock_stream_has_space(struct vsock_sock *vsk); +void vsock_pending_work(struct work_struct *work); +struct sock *__vsock_create(struct net *net, + struct socket *sock, + struct sock *parent, + gfp_t priority, unsigned short type); + +/**** TRANSPORT ****/ + +struct vsock_transport_recv_notify_data { + u64 data1; /* Transport-defined. */ + u64 data2; /* Transport-defined. */ + bool notify_on_block; +}; + +struct vsock_transport_send_notify_data { + u64 data1; /* Transport-defined. */ + u64 data2; /* Transport-defined. */ +}; + +struct vsock_transport { + /* Initialize/tear-down socket. */ + int (*init)(struct vsock_sock *, struct vsock_sock *); + void (*destruct)(struct vsock_sock *); + void (*release)(struct vsock_sock *); + + /* Connections. */ + int (*connect)(struct vsock_sock *); + + /* DGRAM. */ + int (*dgram_bind)(struct vsock_sock *, struct sockaddr_vm *); + int (*dgram_dequeue)(struct kiocb *kiocb, struct vsock_sock *vsk, + struct msghdr *msg, size_t len, int flags); + int (*dgram_enqueue)(struct vsock_sock *, struct sockaddr_vm *, + struct iovec *, size_t len); + bool (*dgram_allow)(u32 cid, u32 port); + + /* STREAM. */ + /* TODO: stream_bind() */ + ssize_t (*stream_dequeue)(struct vsock_sock *, struct iovec *, + size_t len, int flags); + ssize_t (*stream_enqueue)(struct vsock_sock *, struct iovec *, + size_t len); + s64 (*stream_has_data)(struct vsock_sock *); + s64 (*stream_has_space)(struct vsock_sock *); + u64 (*stream_rcvhiwat)(struct vsock_sock *); + bool (*stream_is_active)(struct vsock_sock *); + bool (*stream_allow)(u32 cid, u32 port); + + /* Notification. */ + int (*notify_poll_in)(struct vsock_sock *, size_t, bool *); + int (*notify_poll_out)(struct vsock_sock *, size_t, bool *); + int (*notify_recv_init)(struct vsock_sock *, size_t, + struct vsock_transport_recv_notify_data *); + int (*notify_recv_pre_block)(struct vsock_sock *, size_t, + struct vsock_transport_recv_notify_data *); + int (*notify_recv_pre_dequeue)(struct vsock_sock *, size_t, + struct vsock_transport_recv_notify_data *); + int (*notify_recv_post_dequeue)(struct vsock_sock *, size_t, + ssize_t, bool, struct vsock_transport_recv_notify_data *); + int (*notify_send_init)(struct vsock_sock *, + struct vsock_transport_send_notify_data *); + int (*notify_send_pre_block)(struct vsock_sock *, + struct vsock_transport_send_notify_data *); + int (*notify_send_pre_enqueue)(struct vsock_sock *, + struct vsock_transport_send_notify_data *); + int (*notify_send_post_enqueue)(struct vsock_sock *, ssize_t, + struct vsock_transport_send_notify_data *); + + /* Shutdown. */ + int (*shutdown)(struct vsock_sock *, int); + + /* Buffer sizes. */ + void (*set_buffer_size)(struct vsock_sock *, u64); + void (*set_min_buffer_size)(struct vsock_sock *, u64); + void (*set_max_buffer_size)(struct vsock_sock *, u64); + u64 (*get_buffer_size)(struct vsock_sock *); + u64 (*get_min_buffer_size)(struct vsock_sock *); + u64 (*get_max_buffer_size)(struct vsock_sock *); + + /* Addressing. */ + u32 (*get_local_cid)(void); +}; + +/**** CORE ****/ + +int vsock_core_init(const struct vsock_transport *t); +void vsock_core_exit(void); + +/**** UTILS ****/ + +void vsock_release_pending(struct sock *pending); +void vsock_add_pending(struct sock *listener, struct sock *pending); +void vsock_remove_pending(struct sock *listener, struct sock *pending); +void vsock_enqueue_accept(struct sock *listener, struct sock *connected); +void vsock_insert_connected(struct vsock_sock *vsk); +void vsock_remove_bound(struct vsock_sock *vsk); +void vsock_remove_connected(struct vsock_sock *vsk); +struct sock *vsock_find_bound_socket(struct sockaddr_vm *addr); +struct sock *vsock_find_connected_socket(struct sockaddr_vm *src, + struct sockaddr_vm *dst); +void vsock_for_each_connected_socket(void (*fn)(struct sock *sk)); + +#endif /* __AF_VSOCK_H__ */ diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c new file mode 100644 index 0000000..e8a87cf --- /dev/null +++ b/net/vmw_vsock/vmci_transport.c @@ -0,0 +1,2157 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include + +#define EXPORT_SYMTAB +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "af_vsock.h" +#include "vmci_transport_notify.h" + +static int vmci_transport_recv_dgram_cb(void *data, struct vmci_datagram *dg); +static int vmci_transport_recv_stream_cb(void *data, struct vmci_datagram *dg); +static void vmci_transport_peer_attach_cb(u32 sub_id, + const struct vmci_event_data *ed, + void *client_data); +static void vmci_transport_peer_detach_cb(u32 sub_id, + const struct vmci_event_data *ed, + void *client_data); +static void vmci_transport_recv_pkt_work(struct work_struct *work); +static int vmci_transport_recv_listen(struct sock *sk, + struct vmci_transport_packet *pkt); +static int vmci_transport_recv_connecting_server( + struct sock *sk, + struct sock *pending, + struct vmci_transport_packet *pkt); +static int vmci_transport_recv_connecting_client( + struct sock *sk, + struct vmci_transport_packet *pkt); +static int vmci_transport_recv_connecting_client_negotiate( + struct sock *sk, + struct vmci_transport_packet *pkt); +static int vmci_transport_recv_connecting_client_invalid( + struct sock *sk, + struct vmci_transport_packet *pkt); +static int vmci_transport_recv_connected(struct sock *sk, + struct vmci_transport_packet *pkt); +static bool vmci_transport_old_proto_override(bool *old_pkt_proto); +static u16 vmci_transport_new_proto_supported_versions(void); +static bool vmci_transport_proto_to_notify_struct(struct sock *sk, u16 *proto, + bool old_pkt_proto); + +struct vmci_transport_recv_pkt_info { + struct work_struct work; + struct sock *sk; + struct vmci_transport_packet pkt; +}; + +static struct vmci_handle vmci_transport_stream_handle = { VMCI_INVALID_ID, + VMCI_INVALID_ID }; +static u32 vmci_transport_qp_resumed_sub_id = VMCI_INVALID_ID; + +static int PROTOCOL_OVERRIDE = -1; + +#define VMCI_TRANSPORT_DEFAULT_QP_SIZE_MIN 128 +#define VMCI_TRANSPORT_DEFAULT_QP_SIZE 262144 +#define VMCI_TRANSPORT_DEFAULT_QP_SIZE_MAX 262144 + +/* The default peer timeout indicates how long we will wait for a peer response + * to a control message. + */ +#define VSOCK_DEFAULT_CONNECT_TIMEOUT (2 * HZ) + +#define SS_LISTEN 255 + +/* Helper function to convert from a VMCI error code to a VSock error code. */ + +static s32 vmci_transport_error_to_vsock_error(s32 vmci_error) +{ + int err; + + switch (vmci_error) { + case VMCI_ERROR_NO_MEM: + err = ENOMEM; + break; + case VMCI_ERROR_DUPLICATE_ENTRY: + case VMCI_ERROR_ALREADY_EXISTS: + err = EADDRINUSE; + break; + case VMCI_ERROR_NO_ACCESS: + err = EPERM; + break; + case VMCI_ERROR_NO_RESOURCES: + err = ENOBUFS; + break; + case VMCI_ERROR_INVALID_RESOURCE: + err = EHOSTUNREACH; + break; + case VMCI_ERROR_INVALID_ARGS: + default: + err = EINVAL; + } + + return err > 0 ? -err : err; +} + +static inline void +vmci_transport_packet_init(struct vmci_transport_packet *pkt, + struct sockaddr_vm *src, + struct sockaddr_vm *dst, + u8 type, + u64 size, + u64 mode, + struct vmci_transport_waiting_info *wait, + u16 proto, + struct vmci_handle handle) +{ + /* We register the stream control handler as an any cid handle so we + * must always send from a source address of VMADDR_CID_ANY + */ + pkt->dg.src = vmci_make_handle(VMADDR_CID_ANY, + VMCI_TRANSPORT_PACKET_RID); + pkt->dg.dst = vmci_make_handle(dst->svm_cid, + VMCI_TRANSPORT_PACKET_RID); + pkt->dg.payload_size = sizeof(*pkt) - sizeof(pkt->dg); + pkt->version = VMCI_TRANSPORT_PACKET_VERSION; + pkt->type = type; + pkt->src_port = src->svm_port; + pkt->dst_port = dst->svm_port; + memset(&pkt->proto, 0, sizeof(pkt->proto)); + memset(&pkt->_reserved2, 0, sizeof(pkt->_reserved2)); + + switch (pkt->type) { + case VMCI_TRANSPORT_PACKET_TYPE_INVALID: + pkt->u.size = 0; + break; + + case VMCI_TRANSPORT_PACKET_TYPE_REQUEST: + case VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE: + pkt->u.size = size; + break; + + case VMCI_TRANSPORT_PACKET_TYPE_OFFER: + case VMCI_TRANSPORT_PACKET_TYPE_ATTACH: + pkt->u.handle = handle; + break; + + case VMCI_TRANSPORT_PACKET_TYPE_WROTE: + case VMCI_TRANSPORT_PACKET_TYPE_READ: + case VMCI_TRANSPORT_PACKET_TYPE_RST: + pkt->u.size = 0; + break; + + case VMCI_TRANSPORT_PACKET_TYPE_SHUTDOWN: + pkt->u.mode = mode; + break; + + case VMCI_TRANSPORT_PACKET_TYPE_WAITING_READ: + case VMCI_TRANSPORT_PACKET_TYPE_WAITING_WRITE: + memcpy(&pkt->u.wait, wait, sizeof(pkt->u.wait)); + break; + + case VMCI_TRANSPORT_PACKET_TYPE_REQUEST2: + case VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE2: + pkt->u.size = size; + pkt->proto = proto; + break; + } +} + +static inline void +vmci_transport_packet_get_addresses(struct vmci_transport_packet *pkt, + struct sockaddr_vm *local, + struct sockaddr_vm *remote) +{ + vsock_addr_init(local, pkt->dg.dst.context, pkt->dst_port); + vsock_addr_init(remote, pkt->dg.src.context, pkt->src_port); +} + +static int +__vmci_transport_send_control_pkt(struct vmci_transport_packet *pkt, + struct sockaddr_vm *src, + struct sockaddr_vm *dst, + enum vmci_transport_packet_type type, + u64 size, + u64 mode, + struct vmci_transport_waiting_info *wait, + u16 proto, + struct vmci_handle handle, + bool convert_error) +{ + int err; + + vmci_transport_packet_init(pkt, src, dst, type, size, mode, wait, + proto, handle); + err = vmci_datagram_send(&pkt->dg); + if (convert_error && (err < 0)) + return vmci_transport_error_to_vsock_error(err); + + return err; +} + +static int +vmci_transport_reply_control_pkt_fast(struct vmci_transport_packet *pkt, + enum vmci_transport_packet_type type, + u64 size, + u64 mode, + struct vmci_transport_waiting_info *wait, + struct vmci_handle handle) +{ + struct vmci_transport_packet reply; + struct sockaddr_vm src, dst; + + if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST) { + return 0; + } else { + vmci_transport_packet_get_addresses(pkt, &src, &dst); + return __vmci_transport_send_control_pkt(&reply, &src, &dst, + type, + size, mode, wait, + VSOCK_PROTO_INVALID, + handle, true); + } +} + +static int +vmci_transport_send_control_pkt_bh(struct sockaddr_vm *src, + struct sockaddr_vm *dst, + enum vmci_transport_packet_type type, + u64 size, + u64 mode, + struct vmci_transport_waiting_info *wait, + struct vmci_handle handle) +{ + /* Note that it is safe to use a single packet across all CPUs since + * two tasklets of the same type are guaranteed to not ever run + * simultaneously. If that ever changes, or VMCI stops using tasklets, + * we can use per-cpu packets. + */ + static struct vmci_transport_packet pkt; + + return __vmci_transport_send_control_pkt(&pkt, src, dst, type, + size, mode, wait, + VSOCK_PROTO_INVALID, handle, + false); +} + +static int +vmci_transport_send_control_pkt(struct sock *sk, + enum vmci_transport_packet_type type, + u64 size, + u64 mode, + struct vmci_transport_waiting_info *wait, + u16 proto, + struct vmci_handle handle) +{ + struct vmci_transport_packet *pkt; + struct vsock_sock *vsk; + int err; + + vsk = vsock_sk(sk); + + if (!vsock_addr_bound(&vsk->local_addr)) + return -EINVAL; + + if (!vsock_addr_bound(&vsk->remote_addr)) + return -EINVAL; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) + return -ENOMEM; + + err = __vmci_transport_send_control_pkt(pkt, &vsk->local_addr, + &vsk->remote_addr, type, size, + mode, wait, proto, handle, + true); + kfree(pkt); + + return err; +} + +static int vmci_transport_send_reset_bh(struct sockaddr_vm *dst, + struct sockaddr_vm *src, + struct vmci_transport_packet *pkt) +{ + if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST) + return 0; + return vmci_transport_send_control_pkt_bh( + dst, src, + VMCI_TRANSPORT_PACKET_TYPE_RST, 0, + 0, NULL, VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_reset(struct sock *sk, + struct vmci_transport_packet *pkt) +{ + if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST) + return 0; + return vmci_transport_send_control_pkt(sk, + VMCI_TRANSPORT_PACKET_TYPE_RST, + 0, 0, NULL, VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_negotiate(struct sock *sk, size_t size) +{ + return vmci_transport_send_control_pkt( + sk, + VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE, + size, 0, NULL, + VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_negotiate2(struct sock *sk, size_t size, + u16 version) +{ + return vmci_transport_send_control_pkt( + sk, + VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE2, + size, 0, NULL, version, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_qp_offer(struct sock *sk, + struct vmci_handle handle) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_OFFER, 0, + 0, NULL, + VSOCK_PROTO_INVALID, handle); +} + +static int vmci_transport_send_attach(struct sock *sk, + struct vmci_handle handle) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_ATTACH, + 0, 0, NULL, VSOCK_PROTO_INVALID, + handle); +} + +static int vmci_transport_reply_reset(struct vmci_transport_packet *pkt) +{ + return vmci_transport_reply_control_pkt_fast( + pkt, + VMCI_TRANSPORT_PACKET_TYPE_RST, + 0, 0, NULL, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_invalid_bh(struct sockaddr_vm *dst, + struct sockaddr_vm *src) +{ + return vmci_transport_send_control_pkt_bh( + dst, src, + VMCI_TRANSPORT_PACKET_TYPE_INVALID, + 0, 0, NULL, VMCI_INVALID_HANDLE); +} + +int vmci_transport_send_wrote_bh(struct sockaddr_vm *dst, + struct sockaddr_vm *src) +{ + return vmci_transport_send_control_pkt_bh( + dst, src, + VMCI_TRANSPORT_PACKET_TYPE_WROTE, 0, + 0, NULL, VMCI_INVALID_HANDLE); +} + +int vmci_transport_send_read_bh(struct sockaddr_vm *dst, + struct sockaddr_vm *src) +{ + return vmci_transport_send_control_pkt_bh( + dst, src, + VMCI_TRANSPORT_PACKET_TYPE_READ, 0, + 0, NULL, VMCI_INVALID_HANDLE); +} + +int vmci_transport_send_wrote(struct sock *sk) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_WROTE, 0, + 0, NULL, VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +int vmci_transport_send_read(struct sock *sk) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_READ, 0, + 0, NULL, VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +int vmci_transport_send_waiting_write(struct sock *sk, + struct vmci_transport_waiting_info *wait) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_WAITING_WRITE, + 0, 0, wait, VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +int vmci_transport_send_waiting_read(struct sock *sk, + struct vmci_transport_waiting_info *wait) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_WAITING_READ, + 0, 0, wait, VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_shutdown(struct vsock_sock *vsk, int mode) +{ + return vmci_transport_send_control_pkt( + &vsk->sk, + VMCI_TRANSPORT_PACKET_TYPE_SHUTDOWN, + 0, mode, NULL, + VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_conn_request(struct sock *sk, size_t size) +{ + return vmci_transport_send_control_pkt(sk, + VMCI_TRANSPORT_PACKET_TYPE_REQUEST, + size, 0, NULL, + VSOCK_PROTO_INVALID, + VMCI_INVALID_HANDLE); +} + +static int vmci_transport_send_conn_request2(struct sock *sk, size_t size, + u16 version) +{ + return vmci_transport_send_control_pkt( + sk, VMCI_TRANSPORT_PACKET_TYPE_REQUEST2, + size, 0, NULL, version, + VMCI_INVALID_HANDLE); +} + +static struct sock *vmci_transport_get_pending( + struct sock *listener, + struct vmci_transport_packet *pkt) +{ + struct vsock_sock *vlistener; + struct vsock_sock *vpending; + struct sock *pending; + + vlistener = vsock_sk(listener); + + list_for_each_entry(vpending, &vlistener->pending_links, + pending_links) { + struct sockaddr_vm src; + struct sockaddr_vm dst; + + vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port); + vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port); + + if (vsock_addr_equals_addr(&src, &vpending->remote_addr) && + vsock_addr_equals_addr(&dst, &vpending->local_addr)) { + pending = sk_vsock(vpending); + sock_hold(pending); + goto found; + } + } + + pending = NULL; +found: + return pending; + +} + +static void vmci_transport_release_pending(struct sock *pending) +{ + sock_put(pending); +} + +/* We allow two kinds of sockets to communicate with a restricted VM: 1) + * trusted sockets 2) sockets from applications running as the same user as the + * VM (this is only true for the host side and only when using hosted products) + */ + +static bool vmci_transport_is_trusted(struct vsock_sock *vsock, u32 peer_cid) +{ + return vsock->trusted || + vmci_is_context_owner(peer_cid, vsock->owner->uid); +} + +/* We allow sending datagrams to and receiving datagrams from a restricted VM + * only if it is trusted as described in vmci_transport_is_trusted. + */ + +static bool vmci_transport_allow_dgram(struct vsock_sock *vsock, u32 peer_cid) +{ + if (vsock->cached_peer != peer_cid) { + vsock->cached_peer = peer_cid; + if (!vmci_transport_is_trusted(vsock, peer_cid) && + (vmci_context_get_priv_flags(peer_cid) & + VMCI_PRIVILEGE_FLAG_RESTRICTED)) { + vsock->cached_peer_allow_dgram = false; + } else { + vsock->cached_peer_allow_dgram = true; + } + } + + return vsock->cached_peer_allow_dgram; +} + +static int +vmci_transport_queue_pair_alloc(struct vmci_qp **qpair, + struct vmci_handle *handle, + u64 produce_size, + u64 consume_size, + u32 peer, u32 flags, bool trusted) +{ + int err = 0; + + if (trusted) { + /* Try to allocate our queue pair as trusted. This will only + * work if vsock is running in the host. + */ + + err = vmci_qpair_alloc(qpair, handle, produce_size, + consume_size, + peer, flags, + VMCI_PRIVILEGE_FLAG_TRUSTED); + if (err != VMCI_ERROR_NO_ACCESS) + goto out; + + } + + err = vmci_qpair_alloc(qpair, handle, produce_size, consume_size, + peer, flags, VMCI_NO_PRIVILEGE_FLAGS); +out: + if (err < 0) { + pr_err("Could not attach to queue pair with %d\n", + err); + err = vmci_transport_error_to_vsock_error(err); + } + + return err; +} + +static int +vmci_transport_datagram_create_hnd(u32 resource_id, + u32 flags, + vmci_datagram_recv_cb recv_cb, + void *client_data, + struct vmci_handle *out_handle) +{ + int err = 0; + + /* Try to allocate our datagram handler as trusted. This will only work + * if vsock is running in the host. + */ + + err = vmci_datagram_create_handle_priv(resource_id, flags, + VMCI_PRIVILEGE_FLAG_TRUSTED, + recv_cb, + client_data, out_handle); + + if (err == VMCI_ERROR_NO_ACCESS) + err = vmci_datagram_create_handle(resource_id, flags, + recv_cb, client_data, + out_handle); + + return err; +} + +/* This is invoked as part of a tasklet that's scheduled when the VMCI + * interrupt fires. This is run in bottom-half context and if it ever needs to + * sleep it should defer that work to a work queue. + */ + +static int vmci_transport_recv_dgram_cb(void *data, struct vmci_datagram *dg) +{ + struct sock *sk; + size_t size; + struct sk_buff *skb; + struct vsock_sock *vsk; + + sk = (struct sock *)data; + + /* This handler is privileged when this module is running on the host. + * We will get datagrams from all endpoints (even VMs that are in a + * restricted context). If we get one from a restricted context then + * the destination socket must be trusted. + * + * NOTE: We access the socket struct without holding the lock here. + * This is ok because the field we are interested is never modified + * outside of the create and destruct socket functions. + */ + vsk = vsock_sk(sk); + if (!vmci_transport_allow_dgram(vsk, dg->src.context)) + return VMCI_ERROR_NO_ACCESS; + + size = VMCI_DG_SIZE(dg); + + /* Attach the packet to the socket's receive queue as an sk_buff. */ + skb = alloc_skb(size, GFP_ATOMIC); + if (skb) { + /* sk_receive_skb() will do a sock_put(), so hold here. */ + sock_hold(sk); + skb_put(skb, size); + memcpy(skb->data, dg, size); + sk_receive_skb(sk, skb, 0); + } + + return VMCI_SUCCESS; +} + +static bool vmci_transport_stream_allow(u32 cid, u32 port) +{ + static const u32 non_socket_contexts[] = { + VMADDR_CID_HYPERVISOR, + VMADDR_CID_RESERVED, + }; + int i; + + BUILD_BUG_ON(sizeof(cid) != sizeof(*non_socket_contexts)); + + for (i = 0; i < ARRAY_SIZE(non_socket_contexts); i++) { + if (cid == non_socket_contexts[i]) + return false; + } + + return true; +} + +/* This is invoked as part of a tasklet that's scheduled when the VMCI + * interrupt fires. This is run in bottom-half context but it defers most of + * its work to the packet handling work queue. + */ + +static int vmci_transport_recv_stream_cb(void *data, struct vmci_datagram *dg) +{ + struct sock *sk; + struct sockaddr_vm dst; + struct sockaddr_vm src; + struct vmci_transport_packet *pkt; + struct vsock_sock *vsk; + bool bh_process_pkt; + int err; + + sk = NULL; + err = VMCI_SUCCESS; + bh_process_pkt = false; + + /* Ignore incoming packets from contexts without sockets, or resources + * that aren't vsock implementations. + */ + + if (!vmci_transport_stream_allow(dg->src.context, -1) + || VMCI_TRANSPORT_PACKET_RID != dg->src.resource) + return VMCI_ERROR_NO_ACCESS; + + if (VMCI_DG_SIZE(dg) < sizeof(*pkt)) + /* Drop datagrams that do not contain full VSock packets. */ + return VMCI_ERROR_INVALID_ARGS; + + pkt = (struct vmci_transport_packet *)dg; + + /* Find the socket that should handle this packet. First we look for a + * connected socket and if there is none we look for a socket bound to + * the destintation address. + */ + vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port); + vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port); + + sk = vsock_find_connected_socket(&src, &dst); + if (!sk) { + sk = vsock_find_bound_socket(&dst); + if (!sk) { + /* We could not find a socket for this specified + * address. If this packet is a RST, we just drop it. + * If it is another packet, we send a RST. Note that + * we do not send a RST reply to RSTs so that we do not + * continually send RSTs between two endpoints. + * + * Note that since this is a reply, dst is src and src + * is dst. + */ + if (vmci_transport_send_reset_bh(&dst, &src, pkt) < 0) + pr_err("unable to send reset\n"); + + err = VMCI_ERROR_NOT_FOUND; + goto out; + } + } + + /* If the received packet type is beyond all types known to this + * implementation, reply with an invalid message. Hopefully this will + * help when implementing backwards compatibility in the future. + */ + if (pkt->type >= VMCI_TRANSPORT_PACKET_TYPE_MAX) { + vmci_transport_send_invalid_bh(&dst, &src); + err = VMCI_ERROR_INVALID_ARGS; + goto out; + } + + /* This handler is privileged when this module is running on the host. + * We will get datagram connect requests from all endpoints (even VMs + * that are in a restricted context). If we get one from a restricted + * context then the destination socket must be trusted. + * + * NOTE: We access the socket struct without holding the lock here. + * This is ok because the field we are interested is never modified + * outside of the create and destruct socket functions. + */ + vsk = vsock_sk(sk); + if (!vmci_transport_allow_dgram(vsk, pkt->dg.src.context)) { + err = VMCI_ERROR_NO_ACCESS; + goto out; + } + + /* We do most everything in a work queue, but let's fast path the + * notification of reads and writes to help data transfer performance. + * We can only do this if there is no process context code executing + * for this socket since that may change the state. + */ + bh_lock_sock(sk); + + if (!sock_owned_by_user(sk) && sk->sk_state == SS_CONNECTED) + vmci_trans(vsk)->notify_ops->handle_notify_pkt( + sk, pkt, true, &dst, &src, + &bh_process_pkt); + + bh_unlock_sock(sk); + + if (!bh_process_pkt) { + struct vmci_transport_recv_pkt_info *recv_pkt_info; + + recv_pkt_info = kmalloc(sizeof(*recv_pkt_info), GFP_ATOMIC); + if (!recv_pkt_info) { + if (vmci_transport_send_reset_bh(&dst, &src, pkt) < 0) + pr_err("unable to send reset\n"); + + err = VMCI_ERROR_NO_MEM; + goto out; + } + + recv_pkt_info->sk = sk; + memcpy(&recv_pkt_info->pkt, pkt, sizeof(recv_pkt_info->pkt)); + INIT_WORK(&recv_pkt_info->work, vmci_transport_recv_pkt_work); + + schedule_work(&recv_pkt_info->work); + /* Clear sk so that the reference count incremented by one of + * the Find functions above is not decremented below. We need + * that reference count for the packet handler we've scheduled + * to run. + */ + sk = NULL; + } + +out: + if (sk) + sock_put(sk); + + return err; +} + +static void vmci_transport_peer_attach_cb(u32 sub_id, + const struct vmci_event_data *e_data, + void *client_data) +{ + struct sock *sk = client_data; + const struct vmci_event_payload_qp *e_payload; + struct vsock_sock *vsk; + + e_payload = vmci_event_data_const_payload(e_data); + + vsk = vsock_sk(sk); + + /* We don't ask for delayed CBs when we subscribe to this event (we + * pass 0 as flags to vmci_event_subscribe()). VMCI makes no + * guarantees in that case about what context we might be running in, + * so it could be BH or process, blockable or non-blockable. So we + * need to account for all possible contexts here. + */ + local_bh_disable(); + bh_lock_sock(sk); + + /* XXX This is lame, we should provide a way to lookup sockets by + * qp_handle. + */ + if (vmci_handle_is_equal(vmci_trans(vsk)->qp_handle, + e_payload->handle)) { + /* XXX This doesn't do anything, but in the future we may want + * to set a flag here to verify the attach really did occur and + * we weren't just sent a datagram claiming it was. + */ + goto out; + } + +out: + bh_unlock_sock(sk); + local_bh_enable(); +} + +static void vmci_transport_handle_detach(struct sock *sk) +{ + struct vsock_sock *vsk; + + vsk = vsock_sk(sk); + if (!vmci_handle_is_invalid(vmci_trans(vsk)->qp_handle)) { + sock_set_flag(sk, SOCK_DONE); + + /* On a detach the peer will not be sending or receiving + * anymore. + */ + vsk->peer_shutdown = SHUTDOWN_MASK; + + /* We should not be sending anymore since the peer won't be + * there to receive, but we can still receive if there is data + * left in our consume queue. + */ + if (vsock_stream_has_data(vsk) <= 0) { + if (sk->sk_state == SS_CONNECTING) { + /* The peer may detach from a queue pair while + * we are still in the connecting state, i.e., + * if the peer VM is killed after attaching to + * a queue pair, but before we complete the + * handshake. In that case, we treat the detach + * event like a reset. + */ + + sk->sk_state = SS_UNCONNECTED; + sk->sk_err = ECONNRESET; + sk->sk_error_report(sk); + return; + } + sk->sk_state = SS_UNCONNECTED; + } + sk->sk_state_change(sk); + } +} + +static void vmci_transport_peer_detach_cb(u32 sub_id, + const struct vmci_event_data *e_data, + void *client_data) +{ + struct sock *sk = client_data; + const struct vmci_event_payload_qp *e_payload; + struct vsock_sock *vsk; + + e_payload = vmci_event_data_const_payload(e_data); + vsk = vsock_sk(sk); + if (vmci_handle_is_invalid(e_payload->handle)) + return; + + /* Same rules for locking as for peer_attach_cb(). */ + local_bh_disable(); + bh_lock_sock(sk); + + /* XXX This is lame, we should provide a way to lookup sockets by + * qp_handle. + */ + if (vmci_handle_is_equal(vmci_trans(vsk)->qp_handle, + e_payload->handle)) + vmci_transport_handle_detach(sk); + + bh_unlock_sock(sk); + local_bh_enable(); +} + +static void vmci_transport_qp_resumed_cb(u32 sub_id, + const struct vmci_event_data *e_data, + void *client_data) +{ + vsock_for_each_connected_socket(vmci_transport_handle_detach); +} + +static void vmci_transport_recv_pkt_work(struct work_struct *work) +{ + struct vmci_transport_recv_pkt_info *recv_pkt_info; + struct vmci_transport_packet *pkt; + struct sock *sk; + + recv_pkt_info = + container_of(work, struct vmci_transport_recv_pkt_info, work); + sk = recv_pkt_info->sk; + pkt = &recv_pkt_info->pkt; + + lock_sock(sk); + + switch (sk->sk_state) { + case SS_LISTEN: + vmci_transport_recv_listen(sk, pkt); + break; + case SS_CONNECTING: + /* Processing of pending connections for servers goes through + * the listening socket, so see vmci_transport_recv_listen() + * for that path. + */ + vmci_transport_recv_connecting_client(sk, pkt); + break; + case SS_CONNECTED: + vmci_transport_recv_connected(sk, pkt); + break; + default: + /* Because this function does not run in the same context as + * vmci_transport_recv_stream_cb it is possible that the + * socket has closed. We need to let the other side know or it + * could be sitting in a connect and hang forever. Send a + * reset to prevent that. + */ + vmci_transport_send_reset(sk, pkt); + goto out; + } + +out: + release_sock(sk); + kfree(recv_pkt_info); + /* Release reference obtained in the stream callback when we fetched + * this socket out of the bound or connected list. + */ + sock_put(sk); +} + +static int vmci_transport_recv_listen(struct sock *sk, + struct vmci_transport_packet *pkt) +{ + struct sock *pending; + struct vsock_sock *vpending; + int err; + u64 qp_size; + bool old_request = false; + bool old_pkt_proto = false; + + err = 0; + + /* Because we are in the listen state, we could be receiving a packet + * for ourself or any previous connection requests that we received. + * If it's the latter, we try to find a socket in our list of pending + * connections and, if we do, call the appropriate handler for the + * state that that socket is in. Otherwise we try to service the + * connection request. + */ + pending = vmci_transport_get_pending(sk, pkt); + if (pending) { + lock_sock(pending); + switch (pending->sk_state) { + case SS_CONNECTING: + err = vmci_transport_recv_connecting_server(sk, + pending, + pkt); + break; + default: + vmci_transport_send_reset(pending, pkt); + err = -EINVAL; + } + + if (err < 0) + vsock_remove_pending(sk, pending); + + release_sock(pending); + vmci_transport_release_pending(pending); + + return err; + } + + /* The listen state only accepts connection requests. Reply with a + * reset unless we received a reset. + */ + + if (!(pkt->type == VMCI_TRANSPORT_PACKET_TYPE_REQUEST || + pkt->type == VMCI_TRANSPORT_PACKET_TYPE_REQUEST2)) { + vmci_transport_reply_reset(pkt); + return -EINVAL; + } + + if (pkt->u.size == 0) { + vmci_transport_reply_reset(pkt); + return -EINVAL; + } + + /* If this socket can't accommodate this connection request, we send a + * reset. Otherwise we create and initialize a child socket and reply + * with a connection negotiation. + */ + if (sk->sk_ack_backlog >= sk->sk_max_ack_backlog) { + vmci_transport_reply_reset(pkt); + return -ECONNREFUSED; + } + + pending = __vsock_create(sock_net(sk), NULL, sk, GFP_KERNEL, + sk->sk_type); + if (!pending) { + vmci_transport_send_reset(sk, pkt); + return -ENOMEM; + } + + vpending = vsock_sk(pending); + + vsock_addr_init(&vpending->local_addr, pkt->dg.dst.context, + pkt->dst_port); + vsock_addr_init(&vpending->remote_addr, pkt->dg.src.context, + pkt->src_port); + + /* If the proposed size fits within our min/max, accept it. Otherwise + * propose our own size. + */ + if (pkt->u.size >= vmci_trans(vpending)->queue_pair_min_size && + pkt->u.size <= vmci_trans(vpending)->queue_pair_max_size) { + qp_size = pkt->u.size; + } else { + qp_size = vmci_trans(vpending)->queue_pair_size; + } + + /* Figure out if we are using old or new requests based on the + * overrides pkt types sent by our peer. + */ + if (vmci_transport_old_proto_override(&old_pkt_proto)) { + old_request = old_pkt_proto; + } else { + if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_REQUEST) + old_request = true; + else if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_REQUEST2) + old_request = false; + + } + + if (old_request) { + /* Handle a REQUEST (or override) */ + u16 version = VSOCK_PROTO_INVALID; + if (vmci_transport_proto_to_notify_struct( + pending, &version, true)) + err = vmci_transport_send_negotiate(pending, qp_size); + else + err = -EINVAL; + + } else { + /* Handle a REQUEST2 (or override) */ + int proto_int = pkt->proto; + int pos; + u16 active_proto_version = 0; + + /* The list of possible protocols is the intersection of all + * protocols the client supports ... plus all the protocols we + * support. + */ + proto_int &= vmci_transport_new_proto_supported_versions(); + + /* We choose the highest possible protocol version and use that + * one. + */ + pos = fls(proto_int); + if (pos) { + active_proto_version = (1 << (pos - 1)); + if (vmci_transport_proto_to_notify_struct( + pending, &active_proto_version, false)) + err = vmci_transport_send_negotiate2(pending, + qp_size, + active_proto_version); + else + err = -EINVAL; + + } else { + err = -EINVAL; + } + } + + if (err < 0) { + vmci_transport_send_reset(sk, pkt); + sock_put(pending); + err = vmci_transport_error_to_vsock_error(err); + goto out; + } + + vsock_add_pending(sk, pending); + sk->sk_ack_backlog++; + + pending->sk_state = SS_CONNECTING; + vmci_trans(vpending)->produce_size = + vmci_trans(vpending)->consume_size = qp_size; + vmci_trans(vpending)->queue_pair_size = qp_size; + + vmci_trans(vpending)->notify_ops->process_request(pending); + + /* We might never receive another message for this socket and it's not + * connected to any process, so we have to ensure it gets cleaned up + * ourself. Our delayed work function will take care of that. Note + * that we do not ever cancel this function since we have few + * guarantees about its state when calling cancel_delayed_work(). + * Instead we hold a reference on the socket for that function and make + * it capable of handling cases where it needs to do nothing but + * release that reference. + */ + vpending->listener = sk; + sock_hold(sk); + sock_hold(pending); + INIT_DELAYED_WORK(&vpending->dwork, vsock_pending_work); + schedule_delayed_work(&vpending->dwork, HZ); + +out: + return err; +} + +static int +vmci_transport_recv_connecting_server(struct sock *listener, + struct sock *pending, + struct vmci_transport_packet *pkt) +{ + struct vsock_sock *vpending; + struct vmci_handle handle; + struct vmci_qp *qpair; + bool is_local; + u32 flags; + u32 detach_sub_id; + int err; + int skerr; + + vpending = vsock_sk(pending); + detach_sub_id = VMCI_INVALID_ID; + + switch (pkt->type) { + case VMCI_TRANSPORT_PACKET_TYPE_OFFER: + if (vmci_handle_is_invalid(pkt->u.handle)) { + vmci_transport_send_reset(pending, pkt); + skerr = EPROTO; + err = -EINVAL; + goto destroy; + } + break; + default: + /* Close and cleanup the connection. */ + vmci_transport_send_reset(pending, pkt); + skerr = EPROTO; + err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; + goto destroy; + } + + /* In order to complete the connection we need to attach to the offered + * queue pair and send an attach notification. We also subscribe to the + * detach event so we know when our peer goes away, and we do that + * before attaching so we don't miss an event. If all this succeeds, + * we update our state and wakeup anything waiting in accept() for a + * connection. + */ + + /* We don't care about attach since we ensure the other side has + * attached by specifying the ATTACH_ONLY flag below. + */ + err = vmci_event_subscribe(VMCI_EVENT_QP_PEER_DETACH, + vmci_transport_peer_detach_cb, + pending, &detach_sub_id); + if (err < VMCI_SUCCESS) { + vmci_transport_send_reset(pending, pkt); + err = vmci_transport_error_to_vsock_error(err); + skerr = -err; + goto destroy; + } + + vmci_trans(vpending)->detach_sub_id = detach_sub_id; + + /* Now attach to the queue pair the client created. */ + handle = pkt->u.handle; + + /* vpending->local_addr always has a context id so we do not need to + * worry about VMADDR_CID_ANY in this case. + */ + is_local = + vpending->remote_addr.svm_cid == vpending->local_addr.svm_cid; + flags = VMCI_QPFLAG_ATTACH_ONLY; + flags |= is_local ? VMCI_QPFLAG_LOCAL : 0; + + err = vmci_transport_queue_pair_alloc( + &qpair, + &handle, + vmci_trans(vpending)->produce_size, + vmci_trans(vpending)->consume_size, + pkt->dg.src.context, + flags, + vmci_transport_is_trusted( + vpending, + vpending->remote_addr.svm_cid)); + if (err < 0) { + vmci_transport_send_reset(pending, pkt); + skerr = -err; + goto destroy; + } + + vmci_trans(vpending)->qp_handle = handle; + vmci_trans(vpending)->qpair = qpair; + + /* When we send the attach message, we must be ready to handle incoming + * control messages on the newly connected socket. So we move the + * pending socket to the connected state before sending the attach + * message. Otherwise, an incoming packet triggered by the attach being + * received by the peer may be processed concurrently with what happens + * below after sending the attach message, and that incoming packet + * will find the listening socket instead of the (currently) pending + * socket. Note that enqueueing the socket increments the reference + * count, so even if a reset comes before the connection is accepted, + * the socket will be valid until it is removed from the queue. + * + * If we fail sending the attach below, we remove the socket from the + * connected list and move the socket to SS_UNCONNECTED before + * releasing the lock, so a pending slow path processing of an incoming + * packet will not see the socket in the connected state in that case. + */ + pending->sk_state = SS_CONNECTED; + + vsock_insert_connected(vpending); + + /* Notify our peer of our attach. */ + err = vmci_transport_send_attach(pending, handle); + if (err < 0) { + vsock_remove_connected(vpending); + pr_err("Could not send attach\n"); + vmci_transport_send_reset(pending, pkt); + err = vmci_transport_error_to_vsock_error(err); + skerr = -err; + goto destroy; + } + + /* We have a connection. Move the now connected socket from the + * listener's pending list to the accept queue so callers of accept() + * can find it. + */ + vsock_remove_pending(listener, pending); + vsock_enqueue_accept(listener, pending); + + /* Callers of accept() will be be waiting on the listening socket, not + * the pending socket. + */ + listener->sk_state_change(listener); + + return 0; + +destroy: + pending->sk_err = skerr; + pending->sk_state = SS_UNCONNECTED; + /* As long as we drop our reference, all necessary cleanup will handle + * when the cleanup function drops its reference and our destruct + * implementation is called. Note that since the listen handler will + * remove pending from the pending list upon our failure, the cleanup + * function won't drop the additional reference, which is why we do it + * here. + */ + sock_put(pending); + + return err; +} + +static int +vmci_transport_recv_connecting_client(struct sock *sk, + struct vmci_transport_packet *pkt) +{ + struct vsock_sock *vsk; + int err; + int skerr; + + vsk = vsock_sk(sk); + + switch (pkt->type) { + case VMCI_TRANSPORT_PACKET_TYPE_ATTACH: + if (vmci_handle_is_invalid(pkt->u.handle) || + !vmci_handle_is_equal(pkt->u.handle, + vmci_trans(vsk)->qp_handle)) { + skerr = EPROTO; + err = -EINVAL; + goto destroy; + } + + /* Signify the socket is connected and wakeup the waiter in + * connect(). Also place the socket in the connected table for + * accounting (it can already be found since it's in the bound + * table). + */ + sk->sk_state = SS_CONNECTED; + sk->sk_socket->state = SS_CONNECTED; + vsock_insert_connected(vsk); + sk->sk_state_change(sk); + + break; + case VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE: + case VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE2: + if (pkt->u.size == 0 + || pkt->dg.src.context != vsk->remote_addr.svm_cid + || pkt->src_port != vsk->remote_addr.svm_port + || !vmci_handle_is_invalid(vmci_trans(vsk)->qp_handle) + || vmci_trans(vsk)->qpair + || vmci_trans(vsk)->produce_size != 0 + || vmci_trans(vsk)->consume_size != 0 + || vmci_trans(vsk)->attach_sub_id != VMCI_INVALID_ID + || vmci_trans(vsk)->detach_sub_id != VMCI_INVALID_ID) { + skerr = EPROTO; + err = -EINVAL; + + goto destroy; + } + + err = vmci_transport_recv_connecting_client_negotiate(sk, pkt); + if (err) { + skerr = -err; + goto destroy; + } + + break; + case VMCI_TRANSPORT_PACKET_TYPE_INVALID: + err = vmci_transport_recv_connecting_client_invalid(sk, pkt); + if (err) { + skerr = -err; + goto destroy; + } + + break; + case VMCI_TRANSPORT_PACKET_TYPE_RST: + /* Older versions of the linux code (WS 6.5 / ESX 4.0) used to + * continue processing here after they sent an INVALID packet. + * This meant that we got a RST after the INVALID. We ignore a + * RST after an INVALID. The common code doesn't send the RST + * ... so we can hang if an old version of the common code + * fails between getting a REQUEST and sending an OFFER back. + * Not much we can do about it... except hope that it doesn't + * happen. + */ + if (vsk->ignore_connecting_rst) { + vsk->ignore_connecting_rst = false; + } else { + skerr = ECONNRESET; + err = 0; + goto destroy; + } + + break; + default: + /* Close and cleanup the connection. */ + skerr = EPROTO; + err = -EINVAL; + goto destroy; + } + + return 0; + +destroy: + vmci_transport_send_reset(sk, pkt); + + sk->sk_state = SS_UNCONNECTED; + sk->sk_err = skerr; + sk->sk_error_report(sk); + return err; +} + +static int vmci_transport_recv_connecting_client_negotiate( + struct sock *sk, + struct vmci_transport_packet *pkt) +{ + int err; + struct vsock_sock *vsk; + struct vmci_handle handle; + struct vmci_qp *qpair; + u32 attach_sub_id; + u32 detach_sub_id; + bool is_local; + u32 flags; + bool old_proto = true; + bool old_pkt_proto; + u16 version; + + vsk = vsock_sk(sk); + handle = VMCI_INVALID_HANDLE; + attach_sub_id = VMCI_INVALID_ID; + detach_sub_id = VMCI_INVALID_ID; + + /* If we have gotten here then we should be past the point where old + * linux vsock could have sent the bogus rst. + */ + vsk->sent_request = false; + vsk->ignore_connecting_rst = false; + + /* Verify that we're OK with the proposed queue pair size */ + if (pkt->u.size < vmci_trans(vsk)->queue_pair_min_size || + pkt->u.size > vmci_trans(vsk)->queue_pair_max_size) { + err = -EINVAL; + goto destroy; + } + + /* At this point we know the CID the peer is using to talk to us. */ + + if (vsk->local_addr.svm_cid == VMADDR_CID_ANY) + vsk->local_addr.svm_cid = pkt->dg.dst.context; + + /* Setup the notify ops to be the highest supported version that both + * the server and the client support. + */ + + if (vmci_transport_old_proto_override(&old_pkt_proto)) { + old_proto = old_pkt_proto; + } else { + if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE) + old_proto = true; + else if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE2) + old_proto = false; + + } + + if (old_proto) + version = VSOCK_PROTO_INVALID; + else + version = pkt->proto; + + if (!vmci_transport_proto_to_notify_struct(sk, &version, old_proto)) { + err = -EINVAL; + goto destroy; + } + + /* Subscribe to attach and detach events first. + * + * XXX We attach once for each queue pair created for now so it is easy + * to find the socket (it's provided), but later we should only + * subscribe once and add a way to lookup sockets by queue pair handle. + */ + err = vmci_event_subscribe(VMCI_EVENT_QP_PEER_ATTACH, + vmci_transport_peer_attach_cb, + sk, &attach_sub_id); + if (err < VMCI_SUCCESS) { + err = vmci_transport_error_to_vsock_error(err); + goto destroy; + } + + err = vmci_event_subscribe(VMCI_EVENT_QP_PEER_DETACH, + vmci_transport_peer_detach_cb, + sk, &detach_sub_id); + if (err < VMCI_SUCCESS) { + err = vmci_transport_error_to_vsock_error(err); + goto destroy; + } + + /* Make VMCI select the handle for us. */ + handle = VMCI_INVALID_HANDLE; + is_local = vsk->remote_addr.svm_cid == vsk->local_addr.svm_cid; + flags = is_local ? VMCI_QPFLAG_LOCAL : 0; + + err = vmci_transport_queue_pair_alloc(&qpair, + &handle, + pkt->u.size, + pkt->u.size, + vsk->remote_addr.svm_cid, + flags, + vmci_transport_is_trusted( + vsk, + vsk-> + remote_addr.svm_cid)); + if (err < 0) + goto destroy; + + err = vmci_transport_send_qp_offer(sk, handle); + if (err < 0) { + err = vmci_transport_error_to_vsock_error(err); + goto destroy; + } + + vmci_trans(vsk)->qp_handle = handle; + vmci_trans(vsk)->qpair = qpair; + + vmci_trans(vsk)->produce_size = vmci_trans(vsk)->consume_size = + pkt->u.size; + + vmci_trans(vsk)->attach_sub_id = attach_sub_id; + vmci_trans(vsk)->detach_sub_id = detach_sub_id; + + vmci_trans(vsk)->notify_ops->process_negotiate(sk); + + return 0; + +destroy: + if (attach_sub_id != VMCI_INVALID_ID) + vmci_event_unsubscribe(attach_sub_id); + + if (detach_sub_id != VMCI_INVALID_ID) + vmci_event_unsubscribe(detach_sub_id); + + if (!vmci_handle_is_invalid(handle)) + vmci_qpair_detach(&qpair); + + return err; +} + +static int +vmci_transport_recv_connecting_client_invalid(struct sock *sk, + struct vmci_transport_packet *pkt) +{ + int err = 0; + struct vsock_sock *vsk = vsock_sk(sk); + + if (vsk->sent_request) { + vsk->sent_request = false; + vsk->ignore_connecting_rst = true; + + err = vmci_transport_send_conn_request( + sk, vmci_trans(vsk)->queue_pair_size); + if (err < 0) + err = vmci_transport_error_to_vsock_error(err); + else + err = 0; + + } + + return err; +} + +static int vmci_transport_recv_connected(struct sock *sk, + struct vmci_transport_packet *pkt) +{ + struct vsock_sock *vsk; + bool pkt_processed = false; + + /* In cases where we are closing the connection, it's sufficient to + * mark the state change (and maybe error) and wake up any waiting + * threads. Since this is a connected socket, it's owned by a user + * process and will be cleaned up when the failure is passed back on + * the current or next system call. Our system call implementations + * must therefore check for error and state changes on entry and when + * being awoken. + */ + switch (pkt->type) { + case VMCI_TRANSPORT_PACKET_TYPE_SHUTDOWN: + if (pkt->u.mode) { + vsk = vsock_sk(sk); + + vsk->peer_shutdown |= pkt->u.mode; + sk->sk_state_change(sk); + } + break; + + case VMCI_TRANSPORT_PACKET_TYPE_RST: + vsk = vsock_sk(sk); + /* It is possible that we sent our peer a message (e.g a + * WAITING_READ) right before we got notified that the peer had + * detached. If that happens then we can get a RST pkt back + * from our peer even though there is data available for us to + * read. In that case, don't shutdown the socket completely but + * instead allow the local client to finish reading data off + * the queuepair. Always treat a RST pkt in connected mode like + * a clean shutdown. + */ + sock_set_flag(sk, SOCK_DONE); + vsk->peer_shutdown = SHUTDOWN_MASK; + if (vsock_stream_has_data(vsk) <= 0) + sk->sk_state = SS_DISCONNECTING; + + sk->sk_state_change(sk); + break; + + default: + vsk = vsock_sk(sk); + vmci_trans(vsk)->notify_ops->handle_notify_pkt( + sk, pkt, false, NULL, NULL, + &pkt_processed); + if (!pkt_processed) + return -EINVAL; + + break; + } + + return 0; +} + +static int vmci_transport_socket_init(struct vsock_sock *vsk, + struct vsock_sock *psk) +{ + vsk->trans = kmalloc(sizeof(struct vmci_transport), GFP_KERNEL); + if (!vsk->trans) + return -ENOMEM; + + vmci_trans(vsk)->dg_handle = VMCI_INVALID_HANDLE; + vmci_trans(vsk)->qp_handle = VMCI_INVALID_HANDLE; + vmci_trans(vsk)->qpair = NULL; + vmci_trans(vsk)->produce_size = vmci_trans(vsk)->consume_size = 0; + vmci_trans(vsk)->attach_sub_id = vmci_trans(vsk)->detach_sub_id = + VMCI_INVALID_ID; + vmci_trans(vsk)->notify_ops = NULL; + if (psk) { + vmci_trans(vsk)->queue_pair_size = + vmci_trans(psk)->queue_pair_size; + vmci_trans(vsk)->queue_pair_min_size = + vmci_trans(psk)->queue_pair_min_size; + vmci_trans(vsk)->queue_pair_max_size = + vmci_trans(psk)->queue_pair_max_size; + } else { + vmci_trans(vsk)->queue_pair_size = + VMCI_TRANSPORT_DEFAULT_QP_SIZE; + vmci_trans(vsk)->queue_pair_min_size = + VMCI_TRANSPORT_DEFAULT_QP_SIZE_MIN; + vmci_trans(vsk)->queue_pair_max_size = + VMCI_TRANSPORT_DEFAULT_QP_SIZE_MAX; + } + + return 0; +} + +static void vmci_transport_destruct(struct vsock_sock *vsk) +{ + if (vmci_trans(vsk)->attach_sub_id != VMCI_INVALID_ID) { + vmci_event_unsubscribe(vmci_trans(vsk)->attach_sub_id); + vmci_trans(vsk)->attach_sub_id = VMCI_INVALID_ID; + } + + if (vmci_trans(vsk)->detach_sub_id != VMCI_INVALID_ID) { + vmci_event_unsubscribe(vmci_trans(vsk)->detach_sub_id); + vmci_trans(vsk)->detach_sub_id = VMCI_INVALID_ID; + } + + if (!vmci_handle_is_invalid(vmci_trans(vsk)->qp_handle)) { + vmci_qpair_detach(&vmci_trans(vsk)->qpair); + vmci_trans(vsk)->qp_handle = VMCI_INVALID_HANDLE; + vmci_trans(vsk)->produce_size = 0; + vmci_trans(vsk)->consume_size = 0; + } + + if (vmci_trans(vsk)->notify_ops) + vmci_trans(vsk)->notify_ops->socket_destruct(vsk); + + kfree(vsk->trans); + vsk->trans = NULL; +} + +static void vmci_transport_release(struct vsock_sock *vsk) +{ + if (!vmci_handle_is_invalid(vmci_trans(vsk)->dg_handle)) { + vmci_datagram_destroy_handle(vmci_trans(vsk)->dg_handle); + vmci_trans(vsk)->dg_handle = VMCI_INVALID_HANDLE; + } +} + +static int vmci_transport_dgram_bind(struct vsock_sock *vsk, + struct sockaddr_vm *addr) +{ + u32 port; + u32 flags; + int err; + + /* VMCI will select a resource ID for us if we provide + * VMCI_INVALID_ID. + */ + port = addr->svm_port == VMADDR_PORT_ANY ? + VMCI_INVALID_ID : addr->svm_port; + + if (port <= LAST_RESERVED_PORT && !capable(CAP_NET_BIND_SERVICE)) + return -EACCES; + + flags = addr->svm_cid == VMADDR_CID_ANY ? + VMCI_FLAG_ANYCID_DG_HND : 0; + + err = vmci_transport_datagram_create_hnd(port, flags, + vmci_transport_recv_dgram_cb, + &vsk->sk, + &vmci_trans(vsk)->dg_handle); + if (err < VMCI_SUCCESS) + return vmci_transport_error_to_vsock_error(err); + vsock_addr_init(&vsk->local_addr, addr->svm_cid, + vmci_trans(vsk)->dg_handle.resource); + + return 0; +} + +static int vmci_transport_dgram_enqueue( + struct vsock_sock *vsk, + struct sockaddr_vm *remote_addr, + struct iovec *iov, + size_t len) +{ + int err; + struct vmci_datagram *dg; + + if (len > VMCI_MAX_DG_PAYLOAD_SIZE) + return -EMSGSIZE; + + if (!vmci_transport_allow_dgram(vsk, remote_addr->svm_cid)) + return -EPERM; + + /* Allocate a buffer for the user's message and our packet header. */ + dg = kmalloc(len + sizeof(*dg), GFP_KERNEL); + if (!dg) + return -ENOMEM; + + memcpy_fromiovec(VMCI_DG_PAYLOAD(dg), iov, len); + + dg->dst = vmci_make_handle(remote_addr->svm_cid, + remote_addr->svm_port); + dg->src = vmci_make_handle(vsk->local_addr.svm_cid, + vsk->local_addr.svm_port); + dg->payload_size = len; + + err = vmci_datagram_send(dg); + kfree(dg); + if (err < 0) + return vmci_transport_error_to_vsock_error(err); + + return err - sizeof(*dg); +} + +static int vmci_transport_dgram_dequeue(struct kiocb *kiocb, + struct vsock_sock *vsk, + struct msghdr *msg, size_t len, + int flags) +{ + int err; + int noblock; + struct vmci_datagram *dg; + size_t payload_len; + struct sk_buff *skb; + + noblock = flags & MSG_DONTWAIT; + + if (flags & MSG_OOB || flags & MSG_ERRQUEUE) + return -EOPNOTSUPP; + + /* Retrieve the head sk_buff from the socket's receive queue. */ + err = 0; + skb = skb_recv_datagram(&vsk->sk, flags, noblock, &err); + if (err) + return err; + + if (!skb) + return -EAGAIN; + + dg = (struct vmci_datagram *)skb->data; + if (!dg) + /* err is 0, meaning we read zero bytes. */ + goto out; + + payload_len = dg->payload_size; + /* Ensure the sk_buff matches the payload size claimed in the packet. */ + if (payload_len != skb->len - sizeof(*dg)) { + err = -EINVAL; + goto out; + } + + if (payload_len > len) { + payload_len = len; + msg->msg_flags |= MSG_TRUNC; + } + + /* Place the datagram payload in the user's iovec. */ + err = skb_copy_datagram_iovec(skb, sizeof(*dg), msg->msg_iov, + payload_len); + if (err) + goto out; + + msg->msg_namelen = 0; + if (msg->msg_name) { + struct sockaddr_vm *vm_addr; + + /* Provide the address of the sender. */ + vm_addr = (struct sockaddr_vm *)msg->msg_name; + vsock_addr_init(vm_addr, dg->src.context, dg->src.resource); + msg->msg_namelen = sizeof(*vm_addr); + } + err = payload_len; + +out: + skb_free_datagram(&vsk->sk, skb); + return err; +} + +static bool vmci_transport_dgram_allow(u32 cid, u32 port) +{ + if (cid == VMADDR_CID_HYPERVISOR) { + /* Registrations of PBRPC Servers do not modify VMX/Hypervisor + * state and are allowed. + */ + return port == VMCI_UNITY_PBRPC_REGISTER; + } + + return true; +} + +static int vmci_transport_connect(struct vsock_sock *vsk) +{ + int err; + bool old_pkt_proto = false; + struct sock *sk = &vsk->sk; + + if (vmci_transport_old_proto_override(&old_pkt_proto) && + old_pkt_proto) { + err = vmci_transport_send_conn_request( + sk, vmci_trans(vsk)->queue_pair_size); + if (err < 0) { + sk->sk_state = SS_UNCONNECTED; + return err; + } + } else { + int supported_proto_versions = + vmci_transport_new_proto_supported_versions(); + err = vmci_transport_send_conn_request2( + sk, vmci_trans(vsk)->queue_pair_size, + supported_proto_versions); + if (err < 0) { + sk->sk_state = SS_UNCONNECTED; + return err; + } + + vsk->sent_request = true; + } + + return err; +} + +static ssize_t vmci_transport_stream_dequeue( + struct vsock_sock *vsk, + struct iovec *iov, + size_t len, + int flags) +{ + if (flags & MSG_PEEK) + return vmci_qpair_peekv(vmci_trans(vsk)->qpair, iov, len, 0); + else + return vmci_qpair_dequev(vmci_trans(vsk)->qpair, iov, len, 0); +} + +static ssize_t vmci_transport_stream_enqueue( + struct vsock_sock *vsk, + struct iovec *iov, + size_t len) +{ + return vmci_qpair_enquev(vmci_trans(vsk)->qpair, iov, len, 0); +} + +static s64 vmci_transport_stream_has_data(struct vsock_sock *vsk) +{ + return vmci_qpair_consume_buf_ready(vmci_trans(vsk)->qpair); +} + +static s64 vmci_transport_stream_has_space(struct vsock_sock *vsk) +{ + return vmci_qpair_produce_free_space(vmci_trans(vsk)->qpair); +} + +static u64 vmci_transport_stream_rcvhiwat(struct vsock_sock *vsk) +{ + return vmci_trans(vsk)->consume_size; +} + +static bool vmci_transport_stream_is_active(struct vsock_sock *vsk) +{ + return !vmci_handle_is_invalid(vmci_trans(vsk)->qp_handle); +} + +static u64 vmci_transport_get_buffer_size(struct vsock_sock *vsk) +{ + return vmci_trans(vsk)->queue_pair_size; +} + +static u64 vmci_transport_get_min_buffer_size(struct vsock_sock *vsk) +{ + return vmci_trans(vsk)->queue_pair_min_size; +} + +static u64 vmci_transport_get_max_buffer_size(struct vsock_sock *vsk) +{ + return vmci_trans(vsk)->queue_pair_max_size; +} + +static void vmci_transport_set_buffer_size(struct vsock_sock *vsk, u64 val) +{ + if (val < vmci_trans(vsk)->queue_pair_min_size) + vmci_trans(vsk)->queue_pair_min_size = val; + if (val > vmci_trans(vsk)->queue_pair_max_size) + vmci_trans(vsk)->queue_pair_max_size = val; + vmci_trans(vsk)->queue_pair_size = val; +} + +static void vmci_transport_set_min_buffer_size(struct vsock_sock *vsk, + u64 val) +{ + if (val > vmci_trans(vsk)->queue_pair_size) + vmci_trans(vsk)->queue_pair_size = val; + vmci_trans(vsk)->queue_pair_min_size = val; +} + +static void vmci_transport_set_max_buffer_size(struct vsock_sock *vsk, + u64 val) +{ + if (val < vmci_trans(vsk)->queue_pair_size) + vmci_trans(vsk)->queue_pair_size = val; + vmci_trans(vsk)->queue_pair_max_size = val; +} + +static int vmci_transport_notify_poll_in( + struct vsock_sock *vsk, + size_t target, + bool *data_ready_now) +{ + return vmci_trans(vsk)->notify_ops->poll_in( + &vsk->sk, target, data_ready_now); +} + +static int vmci_transport_notify_poll_out( + struct vsock_sock *vsk, + size_t target, + bool *space_available_now) +{ + return vmci_trans(vsk)->notify_ops->poll_out( + &vsk->sk, target, space_available_now); +} + +static int vmci_transport_notify_recv_init( + struct vsock_sock *vsk, + size_t target, + struct vsock_transport_recv_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->recv_init( + &vsk->sk, target, + (struct vmci_transport_recv_notify_data *)data); +} + +static int vmci_transport_notify_recv_pre_block( + struct vsock_sock *vsk, + size_t target, + struct vsock_transport_recv_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->recv_pre_block( + &vsk->sk, target, + (struct vmci_transport_recv_notify_data *)data); +} + +static int vmci_transport_notify_recv_pre_dequeue( + struct vsock_sock *vsk, + size_t target, + struct vsock_transport_recv_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->recv_pre_dequeue( + &vsk->sk, target, + (struct vmci_transport_recv_notify_data *)data); +} + +static int vmci_transport_notify_recv_post_dequeue( + struct vsock_sock *vsk, + size_t target, + ssize_t copied, + bool data_read, + struct vsock_transport_recv_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->recv_post_dequeue( + &vsk->sk, target, copied, data_read, + (struct vmci_transport_recv_notify_data *)data); +} + +static int vmci_transport_notify_send_init( + struct vsock_sock *vsk, + struct vsock_transport_send_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->send_init( + &vsk->sk, + (struct vmci_transport_send_notify_data *)data); +} + +static int vmci_transport_notify_send_pre_block( + struct vsock_sock *vsk, + struct vsock_transport_send_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->send_pre_block( + &vsk->sk, + (struct vmci_transport_send_notify_data *)data); +} + +static int vmci_transport_notify_send_pre_enqueue( + struct vsock_sock *vsk, + struct vsock_transport_send_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->send_pre_enqueue( + &vsk->sk, + (struct vmci_transport_send_notify_data *)data); +} + +static int vmci_transport_notify_send_post_enqueue( + struct vsock_sock *vsk, + ssize_t written, + struct vsock_transport_send_notify_data *data) +{ + return vmci_trans(vsk)->notify_ops->send_post_enqueue( + &vsk->sk, written, + (struct vmci_transport_send_notify_data *)data); +} + +static bool vmci_transport_old_proto_override(bool *old_pkt_proto) +{ + if (PROTOCOL_OVERRIDE != -1) { + if (PROTOCOL_OVERRIDE == 0) + *old_pkt_proto = true; + else + *old_pkt_proto = false; + + pr_info("Proto override in use\n"); + return true; + } + + return false; +} + +static bool vmci_transport_proto_to_notify_struct(struct sock *sk, + u16 *proto, + bool old_pkt_proto) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + if (old_pkt_proto) { + if (*proto != VSOCK_PROTO_INVALID) { + pr_err("Can't set both an old and new protocol\n"); + return false; + } + vmci_trans(vsk)->notify_ops = &vmci_transport_notify_pkt_ops; + goto exit; + } + + switch (*proto) { + case VSOCK_PROTO_PKT_ON_NOTIFY: + vmci_trans(vsk)->notify_ops = + &vmci_transport_notify_pkt_q_state_ops; + break; + default: + pr_err("Unknown notify protocol version\n"); + return false; + } + +exit: + vmci_trans(vsk)->notify_ops->socket_init(sk); + return true; +} + +static u16 vmci_transport_new_proto_supported_versions(void) +{ + if (PROTOCOL_OVERRIDE != -1) + return PROTOCOL_OVERRIDE; + + return VSOCK_PROTO_ALL_SUPPORTED; +} + +static u32 vmci_transport_get_local_cid(void) +{ + return vmci_get_context_id(); +} + +static struct vsock_transport vmci_transport = { + .init = vmci_transport_socket_init, + .destruct = vmci_transport_destruct, + .release = vmci_transport_release, + .connect = vmci_transport_connect, + .dgram_bind = vmci_transport_dgram_bind, + .dgram_dequeue = vmci_transport_dgram_dequeue, + .dgram_enqueue = vmci_transport_dgram_enqueue, + .dgram_allow = vmci_transport_dgram_allow, + .stream_dequeue = vmci_transport_stream_dequeue, + .stream_enqueue = vmci_transport_stream_enqueue, + .stream_has_data = vmci_transport_stream_has_data, + .stream_has_space = vmci_transport_stream_has_space, + .stream_rcvhiwat = vmci_transport_stream_rcvhiwat, + .stream_is_active = vmci_transport_stream_is_active, + .stream_allow = vmci_transport_stream_allow, + .notify_poll_in = vmci_transport_notify_poll_in, + .notify_poll_out = vmci_transport_notify_poll_out, + .notify_recv_init = vmci_transport_notify_recv_init, + .notify_recv_pre_block = vmci_transport_notify_recv_pre_block, + .notify_recv_pre_dequeue = vmci_transport_notify_recv_pre_dequeue, + .notify_recv_post_dequeue = vmci_transport_notify_recv_post_dequeue, + .notify_send_init = vmci_transport_notify_send_init, + .notify_send_pre_block = vmci_transport_notify_send_pre_block, + .notify_send_pre_enqueue = vmci_transport_notify_send_pre_enqueue, + .notify_send_post_enqueue = vmci_transport_notify_send_post_enqueue, + .shutdown = vmci_transport_shutdown, + .set_buffer_size = vmci_transport_set_buffer_size, + .set_min_buffer_size = vmci_transport_set_min_buffer_size, + .set_max_buffer_size = vmci_transport_set_max_buffer_size, + .get_buffer_size = vmci_transport_get_buffer_size, + .get_min_buffer_size = vmci_transport_get_min_buffer_size, + .get_max_buffer_size = vmci_transport_get_max_buffer_size, + .get_local_cid = vmci_transport_get_local_cid, +}; + +static int __init vmci_transport_init(void) +{ + int err; + + /* Create the datagram handle that we will use to send and receive all + * VSocket control messages for this context. + */ + err = vmci_transport_datagram_create_hnd(VMCI_TRANSPORT_PACKET_RID, + VMCI_FLAG_ANYCID_DG_HND, + vmci_transport_recv_stream_cb, + NULL, + &vmci_transport_stream_handle); + if (err < VMCI_SUCCESS) { + pr_err("Unable to create datagram handle. (%d)\n", err); + return vmci_transport_error_to_vsock_error(err); + } + + err = vmci_event_subscribe(VMCI_EVENT_QP_RESUMED, + vmci_transport_qp_resumed_cb, + NULL, &vmci_transport_qp_resumed_sub_id); + if (err < VMCI_SUCCESS) { + pr_err("Unable to subscribe to resumed event. (%d)\n", err); + err = vmci_transport_error_to_vsock_error(err); + vmci_transport_qp_resumed_sub_id = VMCI_INVALID_ID; + goto err_destroy_stream_handle; + } + + err = vsock_core_init(&vmci_transport); + if (err < 0) + goto err_unsubscribe; + + return 0; + +err_unsubscribe: + vmci_event_unsubscribe(vmci_transport_qp_resumed_sub_id); +err_destroy_stream_handle: + vmci_datagram_destroy_handle(vmci_transport_stream_handle); + return err; +} +module_init(vmci_transport_init); + +static void __exit vmci_transport_exit(void) +{ + if (!vmci_handle_is_invalid(vmci_transport_stream_handle)) { + if (vmci_datagram_destroy_handle( + vmci_transport_stream_handle) != VMCI_SUCCESS) + pr_err("Couldn't destroy datagram handle\n"); + vmci_transport_stream_handle = VMCI_INVALID_HANDLE; + } + + if (vmci_transport_qp_resumed_sub_id != VMCI_INVALID_ID) { + vmci_event_unsubscribe(vmci_transport_qp_resumed_sub_id); + vmci_transport_qp_resumed_sub_id = VMCI_INVALID_ID; + } + + vsock_core_exit(); +} +module_exit(vmci_transport_exit); + +MODULE_AUTHOR("VMware, Inc."); +MODULE_DESCRIPTION("VMCI transport for Virtual Sockets"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("vmware_vsock"); +MODULE_ALIAS_NETPROTO(PF_VSOCK); diff --git a/net/vmw_vsock/vmci_transport.h b/net/vmw_vsock/vmci_transport.h new file mode 100644 index 0000000..1bf9918 --- /dev/null +++ b/net/vmw_vsock/vmci_transport.h @@ -0,0 +1,139 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _VMCI_TRANSPORT_H_ +#define _VMCI_TRANSPORT_H_ + +#include +#include + +#include "vsock_addr.h" +#include "af_vsock.h" + +/* If the packet format changes in a release then this should change too. */ +#define VMCI_TRANSPORT_PACKET_VERSION 1 + +/* The resource ID on which control packets are sent. */ +#define VMCI_TRANSPORT_PACKET_RID 1 + +#define VSOCK_PROTO_INVALID 0 +#define VSOCK_PROTO_PKT_ON_NOTIFY (1 << 0) +#define VSOCK_PROTO_ALL_SUPPORTED (VSOCK_PROTO_PKT_ON_NOTIFY) + +#define vmci_trans(_vsk) ((struct vmci_transport *)((_vsk)->trans)) + +enum vmci_transport_packet_type { + VMCI_TRANSPORT_PACKET_TYPE_INVALID = 0, + VMCI_TRANSPORT_PACKET_TYPE_REQUEST, + VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE, + VMCI_TRANSPORT_PACKET_TYPE_OFFER, + VMCI_TRANSPORT_PACKET_TYPE_ATTACH, + VMCI_TRANSPORT_PACKET_TYPE_WROTE, + VMCI_TRANSPORT_PACKET_TYPE_READ, + VMCI_TRANSPORT_PACKET_TYPE_RST, + VMCI_TRANSPORT_PACKET_TYPE_SHUTDOWN, + VMCI_TRANSPORT_PACKET_TYPE_WAITING_WRITE, + VMCI_TRANSPORT_PACKET_TYPE_WAITING_READ, + VMCI_TRANSPORT_PACKET_TYPE_REQUEST2, + VMCI_TRANSPORT_PACKET_TYPE_NEGOTIATE2, + VMCI_TRANSPORT_PACKET_TYPE_MAX +}; + +struct vmci_transport_waiting_info { + u64 generation; + u64 offset; +}; + +/* Control packet type for STREAM sockets. DGRAMs have no control packets nor + * special packet header for data packets, they are just raw VMCI DGRAM + * messages. For STREAMs, control packets are sent over the control channel + * while data is written and read directly from queue pairs with no packet + * format. + */ +struct vmci_transport_packet { + struct vmci_datagram dg; + u8 version; + u8 type; + u16 proto; + u32 src_port; + u32 dst_port; + u32 _reserved2; + union { + u64 size; + u64 mode; + struct vmci_handle handle; + struct vmci_transport_waiting_info wait; + } u; +}; + +struct vmci_transport_notify_pkt { + u64 write_notify_window; + u64 write_notify_min_window; + bool peer_waiting_read; + bool peer_waiting_write; + bool peer_waiting_write_detected; + bool sent_waiting_read; + bool sent_waiting_write; + struct vmci_transport_waiting_info peer_waiting_read_info; + struct vmci_transport_waiting_info peer_waiting_write_info; + u64 produce_q_generation; + u64 consume_q_generation; +}; + +struct vmci_transport_notify_pkt_q_state { + u64 write_notify_window; + u64 write_notify_min_window; + bool peer_waiting_write; + bool peer_waiting_write_detected; +}; + +union vmci_transport_notify { + struct vmci_transport_notify_pkt pkt; + struct vmci_transport_notify_pkt_q_state pkt_q_state; +}; + +/* Our transport-specific data. */ +struct vmci_transport { + /* For DGRAMs. */ + struct vmci_handle dg_handle; + /* For STREAMs. */ + struct vmci_handle qp_handle; + struct vmci_qp *qpair; + u64 produce_size; + u64 consume_size; + u64 queue_pair_size; + u64 queue_pair_min_size; + u64 queue_pair_max_size; + u32 attach_sub_id; + u32 detach_sub_id; + union vmci_transport_notify notify; + struct vmci_transport_notify_ops *notify_ops; +}; + +int vmci_transport_register(void); +void vmci_transport_unregister(void); + +int vmci_transport_send_wrote_bh(struct sockaddr_vm *dst, + struct sockaddr_vm *src); +int vmci_transport_send_read_bh(struct sockaddr_vm *dst, + struct sockaddr_vm *src); +int vmci_transport_send_wrote(struct sock *sk); +int vmci_transport_send_read(struct sock *sk); +int vmci_transport_send_waiting_write(struct sock *sk, + struct vmci_transport_waiting_info *wait); +int vmci_transport_send_waiting_read(struct sock *sk, + struct vmci_transport_waiting_info *wait); + +#endif diff --git a/net/vmw_vsock/vmci_transport_notify.c b/net/vmw_vsock/vmci_transport_notify.c new file mode 100644 index 0000000..9a73074 --- /dev/null +++ b/net/vmw_vsock/vmci_transport_notify.c @@ -0,0 +1,680 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2009-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include + +#include "vmci_transport_notify.h" + +#define PKT_FIELD(vsk, field_name) (vmci_trans(vsk)->notify.pkt.field_name) + +static bool vmci_transport_notify_waiting_write(struct vsock_sock *vsk) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + bool retval; + u64 notify_limit; + + if (!PKT_FIELD(vsk, peer_waiting_write)) + return false; + +#ifdef VSOCK_OPTIMIZATION_FLOW_CONTROL + /* When the sender blocks, we take that as a sign that the sender is + * faster than the receiver. To reduce the transmit rate of the sender, + * we delay the sending of the read notification by decreasing the + * write_notify_window. The notification is delayed until the number of + * bytes used in the queue drops below the write_notify_window. + */ + + if (!PKT_FIELD(vsk, peer_waiting_write_detected)) { + PKT_FIELD(vsk, peer_waiting_write_detected) = true; + if (PKT_FIELD(vsk, write_notify_window) < PAGE_SIZE) { + PKT_FIELD(vsk, write_notify_window) = + PKT_FIELD(vsk, write_notify_min_window); + } else { + PKT_FIELD(vsk, write_notify_window) -= PAGE_SIZE; + if (PKT_FIELD(vsk, write_notify_window) < + PKT_FIELD(vsk, write_notify_min_window)) + PKT_FIELD(vsk, write_notify_window) = + PKT_FIELD(vsk, write_notify_min_window); + + } + } + notify_limit = vmci_trans(vsk)->consume_size - + PKT_FIELD(vsk, write_notify_window); +#else + notify_limit = 0; +#endif + + /* For now we ignore the wait information and just see if the free + * space exceeds the notify limit. Note that improving this function + * to be more intelligent will not require a protocol change and will + * retain compatibility between endpoints with mixed versions of this + * function. + * + * The notify_limit is used to delay notifications in the case where + * flow control is enabled. Below the test is expressed in terms of + * free space in the queue: if free_space > ConsumeSize - + * write_notify_window then notify An alternate way of expressing this + * is to rewrite the expression to use the data ready in the receive + * queue: if write_notify_window > bufferReady then notify as + * free_space == ConsumeSize - bufferReady. + */ + retval = vmci_qpair_consume_free_space(vmci_trans(vsk)->qpair) > + notify_limit; +#ifdef VSOCK_OPTIMIZATION_FLOW_CONTROL + if (retval) { + /* + * Once we notify the peer, we reset the detected flag so the + * next wait will again cause a decrease in the window size. + */ + + PKT_FIELD(vsk, peer_waiting_write_detected) = false; + } +#endif + return retval; +#else + return true; +#endif +} + +static bool vmci_transport_notify_waiting_read(struct vsock_sock *vsk) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + if (!PKT_FIELD(vsk, peer_waiting_read)) + return false; + + /* For now we ignore the wait information and just see if there is any + * data for our peer to read. Note that improving this function to be + * more intelligent will not require a protocol change and will retain + * compatibility between endpoints with mixed versions of this + * function. + */ + return vmci_qpair_produce_buf_ready(vmci_trans(vsk)->qpair) > 0; +#else + return true; +#endif +} + +static void +vmci_transport_handle_waiting_read(struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, + struct sockaddr_vm *src) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + struct vsock_sock *vsk; + + vsk = vsock_sk(sk); + + PKT_FIELD(vsk, peer_waiting_read) = true; + memcpy(&PKT_FIELD(vsk, peer_waiting_read_info), &pkt->u.wait, + sizeof(PKT_FIELD(vsk, peer_waiting_read_info))); + + if (vmci_transport_notify_waiting_read(vsk)) { + bool sent; + + if (bottom_half) + sent = vmci_transport_send_wrote_bh(dst, src) > 0; + else + sent = vmci_transport_send_wrote(sk) > 0; + + if (sent) + PKT_FIELD(vsk, peer_waiting_read) = false; + } +#endif +} + +static void +vmci_transport_handle_waiting_write(struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, + struct sockaddr_vm *src) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + struct vsock_sock *vsk; + + vsk = vsock_sk(sk); + + PKT_FIELD(vsk, peer_waiting_write) = true; + memcpy(&PKT_FIELD(vsk, peer_waiting_write_info), &pkt->u.wait, + sizeof(PKT_FIELD(vsk, peer_waiting_write_info))); + + if (vmci_transport_notify_waiting_write(vsk)) { + bool sent; + + if (bottom_half) + sent = vmci_transport_send_read_bh(dst, src) > 0; + else + sent = vmci_transport_send_read(sk) > 0; + + if (sent) + PKT_FIELD(vsk, peer_waiting_write) = false; + } +#endif +} + +static void +vmci_transport_handle_read(struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, struct sockaddr_vm *src) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + struct vsock_sock *vsk; + + vsk = vsock_sk(sk); + PKT_FIELD(vsk, sent_waiting_write) = false; +#endif + + sk->sk_write_space(sk); +} + +static bool send_waiting_read(struct sock *sk, u64 room_needed) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + struct vsock_sock *vsk; + struct vmci_transport_waiting_info waiting_info; + u64 tail; + u64 head; + u64 room_left; + bool ret; + + vsk = vsock_sk(sk); + + if (PKT_FIELD(vsk, sent_waiting_read)) + return true; + + if (PKT_FIELD(vsk, write_notify_window) < + vmci_trans(vsk)->consume_size) + PKT_FIELD(vsk, write_notify_window) = + min(PKT_FIELD(vsk, write_notify_window) + PAGE_SIZE, + vmci_trans(vsk)->consume_size); + + vmci_qpair_get_consume_indexes(vmci_trans(vsk)->qpair, &tail, &head); + room_left = vmci_trans(vsk)->consume_size - head; + if (room_needed >= room_left) { + waiting_info.offset = room_needed - room_left; + waiting_info.generation = + PKT_FIELD(vsk, consume_q_generation) + 1; + } else { + waiting_info.offset = head + room_needed; + waiting_info.generation = PKT_FIELD(vsk, consume_q_generation); + } + + ret = vmci_transport_send_waiting_read(sk, &waiting_info) > 0; + if (ret) + PKT_FIELD(vsk, sent_waiting_read) = true; + + return ret; +#else + return true; +#endif +} + +static bool send_waiting_write(struct sock *sk, u64 room_needed) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + struct vsock_sock *vsk; + struct vmci_transport_waiting_info waiting_info; + u64 tail; + u64 head; + u64 room_left; + bool ret; + + vsk = vsock_sk(sk); + + if (PKT_FIELD(vsk, sent_waiting_write)) + return true; + + vmci_qpair_get_produce_indexes(vmci_trans(vsk)->qpair, &tail, &head); + room_left = vmci_trans(vsk)->produce_size - tail; + if (room_needed + 1 >= room_left) { + /* Wraps around to current generation. */ + waiting_info.offset = room_needed + 1 - room_left; + waiting_info.generation = PKT_FIELD(vsk, produce_q_generation); + } else { + waiting_info.offset = tail + room_needed + 1; + waiting_info.generation = + PKT_FIELD(vsk, produce_q_generation) - 1; + } + + ret = vmci_transport_send_waiting_write(sk, &waiting_info) > 0; + if (ret) + PKT_FIELD(vsk, sent_waiting_write) = true; + + return ret; +#else + return true; +#endif +} + +static int vmci_transport_send_read_notification(struct sock *sk) +{ + struct vsock_sock *vsk; + bool sent_read; + unsigned int retries; + int err; + + vsk = vsock_sk(sk); + sent_read = false; + retries = 0; + err = 0; + + if (vmci_transport_notify_waiting_write(vsk)) { + /* Notify the peer that we have read, retrying the send on + * failure up to our maximum value. XXX For now we just log + * the failure, but later we should schedule a work item to + * handle the resend until it succeeds. That would require + * keeping track of work items in the vsk and cleaning them up + * upon socket close. + */ + while (!(vsk->peer_shutdown & RCV_SHUTDOWN) && + !sent_read && + retries < VMCI_TRANSPORT_MAX_DGRAM_RESENDS) { + err = vmci_transport_send_read(sk); + if (err >= 0) + sent_read = true; + + retries++; + } + + if (retries >= VMCI_TRANSPORT_MAX_DGRAM_RESENDS) + pr_err("%p unable to send read notify to peer\n", sk); + else +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + PKT_FIELD(vsk, peer_waiting_write) = false; +#endif + + } + return err; +} + +static void +vmci_transport_handle_wrote(struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, struct sockaddr_vm *src) +{ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + struct vsock_sock *vsk = vsock_sk(sk); + PKT_FIELD(vsk, sent_waiting_read) = false; +#endif + sk->sk_data_ready(sk, 0); +} + +static void vmci_transport_notify_pkt_socket_init(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + PKT_FIELD(vsk, write_notify_window) = PAGE_SIZE; + PKT_FIELD(vsk, write_notify_min_window) = PAGE_SIZE; + PKT_FIELD(vsk, peer_waiting_read) = false; + PKT_FIELD(vsk, peer_waiting_write) = false; + PKT_FIELD(vsk, peer_waiting_write_detected) = false; + PKT_FIELD(vsk, sent_waiting_read) = false; + PKT_FIELD(vsk, sent_waiting_write) = false; + PKT_FIELD(vsk, produce_q_generation) = 0; + PKT_FIELD(vsk, consume_q_generation) = 0; + + memset(&PKT_FIELD(vsk, peer_waiting_read_info), 0, + sizeof(PKT_FIELD(vsk, peer_waiting_read_info))); + memset(&PKT_FIELD(vsk, peer_waiting_write_info), 0, + sizeof(PKT_FIELD(vsk, peer_waiting_write_info))); +} + +static void vmci_transport_notify_pkt_socket_destruct(struct vsock_sock *vsk) +{ +} + +static int +vmci_transport_notify_pkt_poll_in(struct sock *sk, + size_t target, bool *data_ready_now) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + if (vsock_stream_has_data(vsk)) { + *data_ready_now = true; + } else { + /* We can't read right now because there is nothing in the + * queue. Ask for notifications when there is something to + * read. + */ + if (sk->sk_state == SS_CONNECTED) { + if (!send_waiting_read(sk, 1)) + return -1; + + } + *data_ready_now = false; + } + + return 0; +} + +static int +vmci_transport_notify_pkt_poll_out(struct sock *sk, + size_t target, bool *space_avail_now) +{ + s64 produce_q_free_space; + struct vsock_sock *vsk = vsock_sk(sk); + + produce_q_free_space = vsock_stream_has_space(vsk); + if (produce_q_free_space > 0) { + *space_avail_now = true; + return 0; + } else if (produce_q_free_space == 0) { + /* This is a connected socket but we can't currently send data. + * Notify the peer that we are waiting if the queue is full. We + * only send a waiting write if the queue is full because + * otherwise we end up in an infinite WAITING_WRITE, READ, + * WAITING_WRITE, READ, etc. loop. Treat failing to send the + * notification as a socket error, passing that back through + * the mask. + */ + if (!send_waiting_write(sk, 1)) + return -1; + + *space_avail_now = false; + } + + return 0; +} + +static int +vmci_transport_notify_pkt_recv_init( + struct sock *sk, + size_t target, + struct vmci_transport_recv_notify_data *data) +{ + struct vsock_sock *vsk = vsock_sk(sk); + +#ifdef VSOCK_OPTIMIZATION_WAITING_NOTIFY + data->consume_head = 0; + data->produce_tail = 0; +#ifdef VSOCK_OPTIMIZATION_FLOW_CONTROL + data->notify_on_block = false; + + if (PKT_FIELD(vsk, write_notify_min_window) < target + 1) { + PKT_FIELD(vsk, write_notify_min_window) = target + 1; + if (PKT_FIELD(vsk, write_notify_window) < + PKT_FIELD(vsk, write_notify_min_window)) { + /* If the current window is smaller than the new + * minimal window size, we need to reevaluate whether + * we need to notify the sender. If the number of ready + * bytes are smaller than the new window, we need to + * send a notification to the sender before we block. + */ + + PKT_FIELD(vsk, write_notify_window) = + PKT_FIELD(vsk, write_notify_min_window); + data->notify_on_block = true; + } + } +#endif +#endif + + return 0; +} + +static int +vmci_transport_notify_pkt_recv_pre_block( + struct sock *sk, + size_t target, + struct vmci_transport_recv_notify_data *data) +{ + int err = 0; + + /* Notify our peer that we are waiting for data to read. */ + if (!send_waiting_read(sk, target)) { + err = -EHOSTUNREACH; + return err; + } +#ifdef VSOCK_OPTIMIZATION_FLOW_CONTROL + if (data->notify_on_block) { + err = vmci_transport_send_read_notification(sk); + if (err < 0) + return err; + + data->notify_on_block = false; + } +#endif + + return err; +} + +static int +vmci_transport_notify_pkt_recv_pre_dequeue( + struct sock *sk, + size_t target, + struct vmci_transport_recv_notify_data *data) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + /* Now consume up to len bytes from the queue. Note that since we have + * the socket locked we should copy at least ready bytes. + */ +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + vmci_qpair_get_consume_indexes(vmci_trans(vsk)->qpair, + &data->produce_tail, + &data->consume_head); +#endif + + return 0; +} + +static int +vmci_transport_notify_pkt_recv_post_dequeue( + struct sock *sk, + size_t target, + ssize_t copied, + bool data_read, + struct vmci_transport_recv_notify_data *data) +{ + struct vsock_sock *vsk; + int err; + + vsk = vsock_sk(sk); + err = 0; + + if (data_read) { +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + /* Detect a wrap-around to maintain queue generation. Note + * that this is safe since we hold the socket lock across the + * two queue pair operations. + */ + if (copied >= + vmci_trans(vsk)->consume_size - data->consume_head) + PKT_FIELD(vsk, consume_q_generation)++; +#endif + + err = vmci_transport_send_read_notification(sk); + if (err < 0) + return err; + + } + return err; +} + +static int +vmci_transport_notify_pkt_send_init( + struct sock *sk, + struct vmci_transport_send_notify_data *data) +{ +#ifdef VSOCK_OPTIMIZATION_WAITING_NOTIFY + data->consume_head = 0; + data->produce_tail = 0; +#endif + + return 0; +} + +static int +vmci_transport_notify_pkt_send_pre_block( + struct sock *sk, + struct vmci_transport_send_notify_data *data) +{ + /* Notify our peer that we are waiting for room to write. */ + if (!send_waiting_write(sk, 1)) + return -EHOSTUNREACH; + + return 0; +} + +static int +vmci_transport_notify_pkt_send_pre_enqueue( + struct sock *sk, + struct vmci_transport_send_notify_data *data) +{ + struct vsock_sock *vsk = vsock_sk(sk); + +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + vmci_qpair_get_produce_indexes(vmci_trans(vsk)->qpair, + &data->produce_tail, + &data->consume_head); +#endif + + return 0; +} + +static int +vmci_transport_notify_pkt_send_post_enqueue( + struct sock *sk, + ssize_t written, + struct vmci_transport_send_notify_data *data) +{ + int err = 0; + struct vsock_sock *vsk; + bool sent_wrote = false; + int retries = 0; + + vsk = vsock_sk(sk); + +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + /* Detect a wrap-around to maintain queue generation. Note that this + * is safe since we hold the socket lock across the two queue pair + * operations. + */ + if (written >= vmci_trans(vsk)->produce_size - data->produce_tail) + PKT_FIELD(vsk, produce_q_generation)++; + +#endif + + if (vmci_transport_notify_waiting_read(vsk)) { + /* Notify the peer that we have written, retrying the send on + * failure up to our maximum value. See the XXX comment for the + * corresponding piece of code in StreamRecvmsg() for potential + * improvements. + */ + while (!(vsk->peer_shutdown & RCV_SHUTDOWN) && + !sent_wrote && + retries < VMCI_TRANSPORT_MAX_DGRAM_RESENDS) { + err = vmci_transport_send_wrote(sk); + if (err >= 0) + sent_wrote = true; + + retries++; + } + + if (retries >= VMCI_TRANSPORT_MAX_DGRAM_RESENDS) { + pr_err("%p unable to send wrote notify to peer\n", sk); + return err; + } else { +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) + PKT_FIELD(vsk, peer_waiting_read) = false; +#endif + } + } + return err; +} + +static void +vmci_transport_notify_pkt_handle_pkt( + struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, + struct sockaddr_vm *src, bool *pkt_processed) +{ + bool processed = false; + + switch (pkt->type) { + case VMCI_TRANSPORT_PACKET_TYPE_WROTE: + vmci_transport_handle_wrote(sk, pkt, bottom_half, dst, src); + processed = true; + break; + case VMCI_TRANSPORT_PACKET_TYPE_READ: + vmci_transport_handle_read(sk, pkt, bottom_half, dst, src); + processed = true; + break; + case VMCI_TRANSPORT_PACKET_TYPE_WAITING_WRITE: + vmci_transport_handle_waiting_write(sk, pkt, bottom_half, + dst, src); + processed = true; + break; + + case VMCI_TRANSPORT_PACKET_TYPE_WAITING_READ: + vmci_transport_handle_waiting_read(sk, pkt, bottom_half, + dst, src); + processed = true; + break; + } + + if (pkt_processed) + *pkt_processed = processed; +} + +static void vmci_transport_notify_pkt_process_request(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + PKT_FIELD(vsk, write_notify_window) = vmci_trans(vsk)->consume_size; + if (vmci_trans(vsk)->consume_size < + PKT_FIELD(vsk, write_notify_min_window)) + PKT_FIELD(vsk, write_notify_min_window) = + vmci_trans(vsk)->consume_size; +} + +static void vmci_transport_notify_pkt_process_negotiate(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + PKT_FIELD(vsk, write_notify_window) = vmci_trans(vsk)->consume_size; + if (vmci_trans(vsk)->consume_size < + PKT_FIELD(vsk, write_notify_min_window)) + PKT_FIELD(vsk, write_notify_min_window) = + vmci_trans(vsk)->consume_size; +} + +/* Socket control packet based operations. */ +struct vmci_transport_notify_ops vmci_transport_notify_pkt_ops = { + vmci_transport_notify_pkt_socket_init, + vmci_transport_notify_pkt_socket_destruct, + vmci_transport_notify_pkt_poll_in, + vmci_transport_notify_pkt_poll_out, + vmci_transport_notify_pkt_handle_pkt, + vmci_transport_notify_pkt_recv_init, + vmci_transport_notify_pkt_recv_pre_block, + vmci_transport_notify_pkt_recv_pre_dequeue, + vmci_transport_notify_pkt_recv_post_dequeue, + vmci_transport_notify_pkt_send_init, + vmci_transport_notify_pkt_send_pre_block, + vmci_transport_notify_pkt_send_pre_enqueue, + vmci_transport_notify_pkt_send_post_enqueue, + vmci_transport_notify_pkt_process_request, + vmci_transport_notify_pkt_process_negotiate, +}; diff --git a/net/vmw_vsock/vmci_transport_notify.h b/net/vmw_vsock/vmci_transport_notify.h new file mode 100644 index 0000000..7df7932 --- /dev/null +++ b/net/vmw_vsock/vmci_transport_notify.h @@ -0,0 +1,83 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2009-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __VMCI_TRANSPORT_NOTIFY_H__ +#define __VMCI_TRANSPORT_NOTIFY_H__ + +#include +#include +#include +#include + +#include "vmci_transport.h" + +/* Comment this out to compare with old protocol. */ +#define VSOCK_OPTIMIZATION_WAITING_NOTIFY 1 +#if defined(VSOCK_OPTIMIZATION_WAITING_NOTIFY) +/* Comment this out to remove flow control for "new" protocol */ +#define VSOCK_OPTIMIZATION_FLOW_CONTROL 1 +#endif + +#define VMCI_TRANSPORT_MAX_DGRAM_RESENDS 10 + +struct vmci_transport_recv_notify_data { + u64 consume_head; + u64 produce_tail; + bool notify_on_block; +}; + +struct vmci_transport_send_notify_data { + u64 consume_head; + u64 produce_tail; +}; + +/* Socket notification callbacks. */ +struct vmci_transport_notify_ops { + void (*socket_init) (struct sock *sk); + void (*socket_destruct) (struct vsock_sock *vsk); + int (*poll_in) (struct sock *sk, size_t target, + bool *data_ready_now); + int (*poll_out) (struct sock *sk, size_t target, + bool *space_avail_now); + void (*handle_notify_pkt) (struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, struct sockaddr_vm *dst, + struct sockaddr_vm *src, + bool *pkt_processed); + int (*recv_init) (struct sock *sk, size_t target, + struct vmci_transport_recv_notify_data *data); + int (*recv_pre_block) (struct sock *sk, size_t target, + struct vmci_transport_recv_notify_data *data); + int (*recv_pre_dequeue) (struct sock *sk, size_t target, + struct vmci_transport_recv_notify_data *data); + int (*recv_post_dequeue) (struct sock *sk, size_t target, + ssize_t copied, bool data_read, + struct vmci_transport_recv_notify_data *data); + int (*send_init) (struct sock *sk, + struct vmci_transport_send_notify_data *data); + int (*send_pre_block) (struct sock *sk, + struct vmci_transport_send_notify_data *data); + int (*send_pre_enqueue) (struct sock *sk, + struct vmci_transport_send_notify_data *data); + int (*send_post_enqueue) (struct sock *sk, ssize_t written, + struct vmci_transport_send_notify_data *data); + void (*process_request) (struct sock *sk); + void (*process_negotiate) (struct sock *sk); +}; + +extern struct vmci_transport_notify_ops vmci_transport_notify_pkt_ops; +extern struct vmci_transport_notify_ops vmci_transport_notify_pkt_q_state_ops; + +#endif /* __VMCI_TRANSPORT_NOTIFY_H__ */ diff --git a/net/vmw_vsock/vmci_transport_notify_qstate.c b/net/vmw_vsock/vmci_transport_notify_qstate.c new file mode 100644 index 0000000..622bd7a --- /dev/null +++ b/net/vmw_vsock/vmci_transport_notify_qstate.c @@ -0,0 +1,438 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2009-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include + +#include "vmci_transport_notify.h" + +#define PKT_FIELD(vsk, field_name) \ + (vmci_trans(vsk)->notify.pkt_q_state.field_name) + +static bool vmci_transport_notify_waiting_write(struct vsock_sock *vsk) +{ + bool retval; + u64 notify_limit; + + if (!PKT_FIELD(vsk, peer_waiting_write)) + return false; + + /* When the sender blocks, we take that as a sign that the sender is + * faster than the receiver. To reduce the transmit rate of the sender, + * we delay the sending of the read notification by decreasing the + * write_notify_window. The notification is delayed until the number of + * bytes used in the queue drops below the write_notify_window. + */ + + if (!PKT_FIELD(vsk, peer_waiting_write_detected)) { + PKT_FIELD(vsk, peer_waiting_write_detected) = true; + if (PKT_FIELD(vsk, write_notify_window) < PAGE_SIZE) { + PKT_FIELD(vsk, write_notify_window) = + PKT_FIELD(vsk, write_notify_min_window); + } else { + PKT_FIELD(vsk, write_notify_window) -= PAGE_SIZE; + if (PKT_FIELD(vsk, write_notify_window) < + PKT_FIELD(vsk, write_notify_min_window)) + PKT_FIELD(vsk, write_notify_window) = + PKT_FIELD(vsk, write_notify_min_window); + + } + } + notify_limit = vmci_trans(vsk)->consume_size - + PKT_FIELD(vsk, write_notify_window); + + /* The notify_limit is used to delay notifications in the case where + * flow control is enabled. Below the test is expressed in terms of + * free space in the queue: if free_space > ConsumeSize - + * write_notify_window then notify An alternate way of expressing this + * is to rewrite the expression to use the data ready in the receive + * queue: if write_notify_window > bufferReady then notify as + * free_space == ConsumeSize - bufferReady. + */ + + retval = vmci_qpair_consume_free_space(vmci_trans(vsk)->qpair) > + notify_limit; + + if (retval) { + /* Once we notify the peer, we reset the detected flag so the + * next wait will again cause a decrease in the window size. + */ + + PKT_FIELD(vsk, peer_waiting_write_detected) = false; + } + return retval; +} + +static void +vmci_transport_handle_read(struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, struct sockaddr_vm *src) +{ + sk->sk_write_space(sk); +} + +static void +vmci_transport_handle_wrote(struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, struct sockaddr_vm *src) +{ + sk->sk_data_ready(sk, 0); +} + +static void vsock_block_update_write_window(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + if (PKT_FIELD(vsk, write_notify_window) < vmci_trans(vsk)->consume_size) + PKT_FIELD(vsk, write_notify_window) = + min(PKT_FIELD(vsk, write_notify_window) + PAGE_SIZE, + vmci_trans(vsk)->consume_size); +} + +static int vmci_transport_send_read_notification(struct sock *sk) +{ + struct vsock_sock *vsk; + bool sent_read; + unsigned int retries; + int err; + + vsk = vsock_sk(sk); + sent_read = false; + retries = 0; + err = 0; + + if (vmci_transport_notify_waiting_write(vsk)) { + /* Notify the peer that we have read, retrying the send on + * failure up to our maximum value. XXX For now we just log + * the failure, but later we should schedule a work item to + * handle the resend until it succeeds. That would require + * keeping track of work items in the vsk and cleaning them up + * upon socket close. + */ + while (!(vsk->peer_shutdown & RCV_SHUTDOWN) && + !sent_read && + retries < VMCI_TRANSPORT_MAX_DGRAM_RESENDS) { + err = vmci_transport_send_read(sk); + if (err >= 0) + sent_read = true; + + retries++; + } + + if (retries >= VMCI_TRANSPORT_MAX_DGRAM_RESENDS && !sent_read) + pr_err("%p unable to send read notification to peer\n", + sk); + else + PKT_FIELD(vsk, peer_waiting_write) = false; + + } + return err; +} + +static void vmci_transport_notify_pkt_socket_init(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + PKT_FIELD(vsk, write_notify_window) = PAGE_SIZE; + PKT_FIELD(vsk, write_notify_min_window) = PAGE_SIZE; + PKT_FIELD(vsk, peer_waiting_write) = false; + PKT_FIELD(vsk, peer_waiting_write_detected) = false; +} + +static void vmci_transport_notify_pkt_socket_destruct(struct vsock_sock *vsk) +{ + PKT_FIELD(vsk, write_notify_window) = PAGE_SIZE; + PKT_FIELD(vsk, write_notify_min_window) = PAGE_SIZE; + PKT_FIELD(vsk, peer_waiting_write) = false; + PKT_FIELD(vsk, peer_waiting_write_detected) = false; +} + +static int +vmci_transport_notify_pkt_poll_in(struct sock *sk, + size_t target, bool *data_ready_now) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + if (vsock_stream_has_data(vsk)) { + *data_ready_now = true; + } else { + /* We can't read right now because there is nothing in the + * queue. Ask for notifications when there is something to + * read. + */ + if (sk->sk_state == SS_CONNECTED) + vsock_block_update_write_window(sk); + *data_ready_now = false; + } + + return 0; +} + +static int +vmci_transport_notify_pkt_poll_out(struct sock *sk, + size_t target, bool *space_avail_now) +{ + s64 produce_q_free_space; + struct vsock_sock *vsk = vsock_sk(sk); + + produce_q_free_space = vsock_stream_has_space(vsk); + if (produce_q_free_space > 0) { + *space_avail_now = true; + return 0; + } else if (produce_q_free_space == 0) { + /* This is a connected socket but we can't currently send data. + * Nothing else to do. + */ + *space_avail_now = false; + } + + return 0; +} + +static int +vmci_transport_notify_pkt_recv_init( + struct sock *sk, + size_t target, + struct vmci_transport_recv_notify_data *data) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + data->consume_head = 0; + data->produce_tail = 0; + data->notify_on_block = false; + + if (PKT_FIELD(vsk, write_notify_min_window) < target + 1) { + PKT_FIELD(vsk, write_notify_min_window) = target + 1; + if (PKT_FIELD(vsk, write_notify_window) < + PKT_FIELD(vsk, write_notify_min_window)) { + /* If the current window is smaller than the new + * minimal window size, we need to reevaluate whether + * we need to notify the sender. If the number of ready + * bytes are smaller than the new window, we need to + * send a notification to the sender before we block. + */ + + PKT_FIELD(vsk, write_notify_window) = + PKT_FIELD(vsk, write_notify_min_window); + data->notify_on_block = true; + } + } + + return 0; +} + +static int +vmci_transport_notify_pkt_recv_pre_block( + struct sock *sk, + size_t target, + struct vmci_transport_recv_notify_data *data) +{ + int err = 0; + + vsock_block_update_write_window(sk); + + if (data->notify_on_block) { + err = vmci_transport_send_read_notification(sk); + if (err < 0) + return err; + data->notify_on_block = false; + } + + return err; +} + +static int +vmci_transport_notify_pkt_recv_post_dequeue( + struct sock *sk, + size_t target, + ssize_t copied, + bool data_read, + struct vmci_transport_recv_notify_data *data) +{ + struct vsock_sock *vsk; + int err; + bool was_full = false; + u64 free_space; + + vsk = vsock_sk(sk); + err = 0; + + if (data_read) { + smp_mb(); + + free_space = + vmci_qpair_consume_free_space(vmci_trans(vsk)->qpair); + was_full = free_space == copied; + + if (was_full) + PKT_FIELD(vsk, peer_waiting_write) = true; + + err = vmci_transport_send_read_notification(sk); + if (err < 0) + return err; + + /* See the comment in + * vmci_transport_notify_pkt_send_post_enqueue(). + */ + sk->sk_data_ready(sk, 0); + } + + return err; +} + +static int +vmci_transport_notify_pkt_send_init( + struct sock *sk, + struct vmci_transport_send_notify_data *data) +{ + data->consume_head = 0; + data->produce_tail = 0; + + return 0; +} + +static int +vmci_transport_notify_pkt_send_post_enqueue( + struct sock *sk, + ssize_t written, + struct vmci_transport_send_notify_data *data) +{ + int err = 0; + struct vsock_sock *vsk; + bool sent_wrote = false; + bool was_empty; + int retries = 0; + + vsk = vsock_sk(sk); + + smp_mb(); + + was_empty = + vmci_qpair_produce_buf_ready(vmci_trans(vsk)->qpair) == written; + if (was_empty) { + while (!(vsk->peer_shutdown & RCV_SHUTDOWN) && + !sent_wrote && + retries < VMCI_TRANSPORT_MAX_DGRAM_RESENDS) { + err = vmci_transport_send_wrote(sk); + if (err >= 0) + sent_wrote = true; + + retries++; + } + } + + if (retries >= VMCI_TRANSPORT_MAX_DGRAM_RESENDS && !sent_wrote) { + pr_err("%p unable to send wrote notification to peer\n", + sk); + return err; + } + + return err; +} + +static void +vmci_transport_notify_pkt_handle_pkt( + struct sock *sk, + struct vmci_transport_packet *pkt, + bool bottom_half, + struct sockaddr_vm *dst, + struct sockaddr_vm *src, bool *pkt_processed) +{ + bool processed = false; + + switch (pkt->type) { + case VMCI_TRANSPORT_PACKET_TYPE_WROTE: + vmci_transport_handle_wrote(sk, pkt, bottom_half, dst, src); + processed = true; + break; + case VMCI_TRANSPORT_PACKET_TYPE_READ: + vmci_transport_handle_read(sk, pkt, bottom_half, dst, src); + processed = true; + break; + } + + if (pkt_processed) + *pkt_processed = processed; +} + +static void vmci_transport_notify_pkt_process_request(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + PKT_FIELD(vsk, write_notify_window) = vmci_trans(vsk)->consume_size; + if (vmci_trans(vsk)->consume_size < + PKT_FIELD(vsk, write_notify_min_window)) + PKT_FIELD(vsk, write_notify_min_window) = + vmci_trans(vsk)->consume_size; +} + +static void vmci_transport_notify_pkt_process_negotiate(struct sock *sk) +{ + struct vsock_sock *vsk = vsock_sk(sk); + + PKT_FIELD(vsk, write_notify_window) = vmci_trans(vsk)->consume_size; + if (vmci_trans(vsk)->consume_size < + PKT_FIELD(vsk, write_notify_min_window)) + PKT_FIELD(vsk, write_notify_min_window) = + vmci_trans(vsk)->consume_size; +} + +static int +vmci_transport_notify_pkt_recv_pre_dequeue( + struct sock *sk, + size_t target, + struct vmci_transport_recv_notify_data *data) +{ + return 0; /* NOP for QState. */ +} + +static int +vmci_transport_notify_pkt_send_pre_block( + struct sock *sk, + struct vmci_transport_send_notify_data *data) +{ + return 0; /* NOP for QState. */ +} + +static int +vmci_transport_notify_pkt_send_pre_enqueue( + struct sock *sk, + struct vmci_transport_send_notify_data *data) +{ + return 0; /* NOP for QState. */ +} + +/* Socket always on control packet based operations. */ +struct vmci_transport_notify_ops vmci_transport_notify_pkt_q_state_ops = { + vmci_transport_notify_pkt_socket_init, + vmci_transport_notify_pkt_socket_destruct, + vmci_transport_notify_pkt_poll_in, + vmci_transport_notify_pkt_poll_out, + vmci_transport_notify_pkt_handle_pkt, + vmci_transport_notify_pkt_recv_init, + vmci_transport_notify_pkt_recv_pre_block, + vmci_transport_notify_pkt_recv_pre_dequeue, + vmci_transport_notify_pkt_recv_post_dequeue, + vmci_transport_notify_pkt_send_init, + vmci_transport_notify_pkt_send_pre_block, + vmci_transport_notify_pkt_send_pre_enqueue, + vmci_transport_notify_pkt_send_post_enqueue, + vmci_transport_notify_pkt_process_request, + vmci_transport_notify_pkt_process_negotiate, +}; diff --git a/net/vmw_vsock/vsock_addr.c b/net/vmw_vsock/vsock_addr.c new file mode 100644 index 0000000..b7df1ae --- /dev/null +++ b/net/vmw_vsock/vsock_addr.c @@ -0,0 +1,86 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include + +#include "vsock_addr.h" + +void vsock_addr_init(struct sockaddr_vm *addr, u32 cid, u32 port) +{ + memset(addr, 0, sizeof(*addr)); + addr->svm_family = AF_VSOCK; + addr->svm_cid = cid; + addr->svm_port = port; +} +EXPORT_SYMBOL_GPL(vsock_addr_init); + +int vsock_addr_validate(const struct sockaddr_vm *addr) +{ + if (!addr) + return -EFAULT; + + if (addr->svm_family != AF_VSOCK) + return -EAFNOSUPPORT; + + if (addr->svm_zero[0] != 0) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL_GPL(vsock_addr_validate); + +bool vsock_addr_bound(const struct sockaddr_vm *addr) +{ + return addr->svm_port != VMADDR_PORT_ANY; +} +EXPORT_SYMBOL_GPL(vsock_addr_bound); + +void vsock_addr_unbind(struct sockaddr_vm *addr) +{ + vsock_addr_init(addr, VMADDR_CID_ANY, VMADDR_PORT_ANY); +} +EXPORT_SYMBOL_GPL(vsock_addr_unbind); + +bool vsock_addr_equals_addr(const struct sockaddr_vm *addr, + const struct sockaddr_vm *other) +{ + return addr->svm_cid == other->svm_cid && + addr->svm_port == other->svm_port; +} +EXPORT_SYMBOL_GPL(vsock_addr_equals_addr); + +bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr, + const struct sockaddr_vm *other) +{ + return (addr->svm_cid == VMADDR_CID_ANY || + other->svm_cid == VMADDR_CID_ANY || + addr->svm_cid == other->svm_cid) && + addr->svm_port == other->svm_port; +} +EXPORT_SYMBOL_GPL(vsock_addr_equals_addr_any); + +int vsock_addr_cast(const struct sockaddr *addr, + size_t len, struct sockaddr_vm **out_addr) +{ + if (len < sizeof(**out_addr)) + return -EFAULT; + + *out_addr = (struct sockaddr_vm *)addr; + return vsock_addr_validate(*out_addr); +} +EXPORT_SYMBOL_GPL(vsock_addr_cast); diff --git a/net/vmw_vsock/vsock_addr.h b/net/vmw_vsock/vsock_addr.h new file mode 100644 index 0000000..cdfbcef --- /dev/null +++ b/net/vmw_vsock/vsock_addr.h @@ -0,0 +1,32 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _VSOCK_ADDR_H_ +#define _VSOCK_ADDR_H_ + +#include + +void vsock_addr_init(struct sockaddr_vm *addr, u32 cid, u32 port); +int vsock_addr_validate(const struct sockaddr_vm *addr); +bool vsock_addr_bound(const struct sockaddr_vm *addr); +void vsock_addr_unbind(struct sockaddr_vm *addr); +bool vsock_addr_equals_addr(const struct sockaddr_vm *addr, + const struct sockaddr_vm *other); +bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr, + const struct sockaddr_vm *other); +int vsock_addr_cast(const struct sockaddr *addr, size_t len, + struct sockaddr_vm **out_addr); + +#endif diff --git a/net/vmw_vsock/vsock_version.h b/net/vmw_vsock/vsock_version.h new file mode 100644 index 0000000..4df7f5e --- /dev/null +++ b/net/vmw_vsock/vsock_version.h @@ -0,0 +1,22 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2011-2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _VSOCK_VERSION_H_ +#define _VSOCK_VERSION_H_ + +#define VSOCK_DRIVER_VERSION_PARTS { 1, 0, 0, 0 } +#define VSOCK_DRIVER_VERSION_STRING "1.0.0.0-k" + +#endif /* _VSOCK_VERSION_H_ */ -- cgit v0.10.2 From febf018d22347b5df94066bca05d0c11a84e839d Mon Sep 17 00:00:00 2001 From: David Ward Date: Fri, 8 Feb 2013 17:17:06 +0000 Subject: net/802: Implement Multiple Registration Protocol (MRP) Initial implementation of the Multiple Registration Protocol (MRP) from IEEE 802.1Q-2011, based on the existing implementation of the Generic Attribute Registration Protocol (GARP). Signed-off-by: David Ward Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ab2774e..25bd46f5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1290,6 +1290,8 @@ struct net_device { }; /* GARP */ struct garp_port __rcu *garp_port; + /* MRP */ + struct mrp_port __rcu *mrp_port; /* class/net/name entry */ struct device dev; diff --git a/include/net/mrp.h b/include/net/mrp.h new file mode 100644 index 0000000..4fbf02a --- /dev/null +++ b/include/net/mrp.h @@ -0,0 +1,143 @@ +#ifndef _NET_MRP_H +#define _NET_MRP_H + +#define MRP_END_MARK 0x0 + +struct mrp_pdu_hdr { + u8 version; +}; + +struct mrp_msg_hdr { + u8 attrtype; + u8 attrlen; +}; + +struct mrp_vecattr_hdr { + __be16 lenflags; + unsigned char firstattrvalue[]; +#define MRP_VECATTR_HDR_LEN_MASK cpu_to_be16(0x1FFF) +#define MRP_VECATTR_HDR_FLAG_LA cpu_to_be16(0x2000) +}; + +enum mrp_vecattr_event { + MRP_VECATTR_EVENT_NEW, + MRP_VECATTR_EVENT_JOIN_IN, + MRP_VECATTR_EVENT_IN, + MRP_VECATTR_EVENT_JOIN_MT, + MRP_VECATTR_EVENT_MT, + MRP_VECATTR_EVENT_LV, + __MRP_VECATTR_EVENT_MAX +}; + +struct mrp_skb_cb { + struct mrp_msg_hdr *mh; + struct mrp_vecattr_hdr *vah; + unsigned char attrvalue[]; +}; + +static inline struct mrp_skb_cb *mrp_cb(struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(struct mrp_skb_cb) > + FIELD_SIZEOF(struct sk_buff, cb)); + return (struct mrp_skb_cb *)skb->cb; +} + +enum mrp_applicant_state { + MRP_APPLICANT_INVALID, + MRP_APPLICANT_VO, + MRP_APPLICANT_VP, + MRP_APPLICANT_VN, + MRP_APPLICANT_AN, + MRP_APPLICANT_AA, + MRP_APPLICANT_QA, + MRP_APPLICANT_LA, + MRP_APPLICANT_AO, + MRP_APPLICANT_QO, + MRP_APPLICANT_AP, + MRP_APPLICANT_QP, + __MRP_APPLICANT_MAX +}; +#define MRP_APPLICANT_MAX (__MRP_APPLICANT_MAX - 1) + +enum mrp_event { + MRP_EVENT_NEW, + MRP_EVENT_JOIN, + MRP_EVENT_LV, + MRP_EVENT_TX, + MRP_EVENT_R_NEW, + MRP_EVENT_R_JOIN_IN, + MRP_EVENT_R_IN, + MRP_EVENT_R_JOIN_MT, + MRP_EVENT_R_MT, + MRP_EVENT_R_LV, + MRP_EVENT_R_LA, + MRP_EVENT_REDECLARE, + MRP_EVENT_PERIODIC, + __MRP_EVENT_MAX +}; +#define MRP_EVENT_MAX (__MRP_EVENT_MAX - 1) + +enum mrp_tx_action { + MRP_TX_ACTION_NONE, + MRP_TX_ACTION_S_NEW, + MRP_TX_ACTION_S_JOIN_IN, + MRP_TX_ACTION_S_JOIN_IN_OPTIONAL, + MRP_TX_ACTION_S_IN_OPTIONAL, + MRP_TX_ACTION_S_LV, +}; + +struct mrp_attr { + struct rb_node node; + enum mrp_applicant_state state; + u8 type; + u8 len; + unsigned char value[]; +}; + +enum mrp_applications { + MRP_APPLICATION_MVRP, + __MRP_APPLICATION_MAX +}; +#define MRP_APPLICATION_MAX (__MRP_APPLICATION_MAX - 1) + +struct mrp_application { + enum mrp_applications type; + unsigned int maxattr; + struct packet_type pkttype; + unsigned char group_address[ETH_ALEN]; + u8 version; +}; + +struct mrp_applicant { + struct mrp_application *app; + struct net_device *dev; + struct timer_list join_timer; + + spinlock_t lock; + struct sk_buff_head queue; + struct sk_buff *pdu; + struct rb_root mad; + struct rcu_head rcu; +}; + +struct mrp_port { + struct mrp_applicant __rcu *applicants[MRP_APPLICATION_MAX + 1]; + struct rcu_head rcu; +}; + +extern int mrp_register_application(struct mrp_application *app); +extern void mrp_unregister_application(struct mrp_application *app); + +extern int mrp_init_applicant(struct net_device *dev, + struct mrp_application *app); +extern void mrp_uninit_applicant(struct net_device *dev, + struct mrp_application *app); + +extern int mrp_request_join(const struct net_device *dev, + const struct mrp_application *app, + const void *value, u8 len, u8 type); +extern void mrp_request_leave(const struct net_device *dev, + const struct mrp_application *app, + const void *value, u8 len, u8 type); + +#endif /* _NET_MRP_H */ diff --git a/net/802/Kconfig b/net/802/Kconfig index be33d27..80d4bf7 100644 --- a/net/802/Kconfig +++ b/net/802/Kconfig @@ -5,3 +5,6 @@ config STP config GARP tristate select STP + +config MRP + tristate diff --git a/net/802/Makefile b/net/802/Makefile index a30d6e3..37e654d 100644 --- a/net/802/Makefile +++ b/net/802/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_IPX) += p8022.o psnap.o p8023.o obj-$(CONFIG_ATALK) += p8022.o psnap.o obj-$(CONFIG_STP) += stp.o obj-$(CONFIG_GARP) += garp.o +obj-$(CONFIG_MRP) += mrp.o diff --git a/net/802/mrp.c b/net/802/mrp.c new file mode 100644 index 0000000..47a9e14 --- /dev/null +++ b/net/802/mrp.c @@ -0,0 +1,895 @@ +/* + * IEEE 802.1Q Multiple Registration Protocol (MRP) + * + * Copyright (c) 2012 Massachusetts Institute of Technology + * + * Adapted from code in net/802/garp.c + * Copyright (c) 2008 Patrick McHardy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static unsigned int mrp_join_time __read_mostly = 200; +module_param(mrp_join_time, uint, 0644); +MODULE_PARM_DESC(mrp_join_time, "Join time in ms (default 200ms)"); +MODULE_LICENSE("GPL"); + +static const u8 +mrp_applicant_state_table[MRP_APPLICANT_MAX + 1][MRP_EVENT_MAX + 1] = { + [MRP_APPLICANT_VO] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_VP, + [MRP_EVENT_LV] = MRP_APPLICANT_VO, + [MRP_EVENT_TX] = MRP_APPLICANT_VO, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_VO, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_AO, + [MRP_EVENT_R_IN] = MRP_APPLICANT_VO, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_VO, + [MRP_EVENT_R_MT] = MRP_APPLICANT_VO, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VO, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VO, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VO, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_VO, + }, + [MRP_APPLICANT_VP] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_VP, + [MRP_EVENT_LV] = MRP_APPLICANT_VO, + [MRP_EVENT_TX] = MRP_APPLICANT_AA, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_VP, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_AP, + [MRP_EVENT_R_IN] = MRP_APPLICANT_VP, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_VP, + [MRP_EVENT_R_MT] = MRP_APPLICANT_VP, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VP, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VP, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VP, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_VP, + }, + [MRP_APPLICANT_VN] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_VN, + [MRP_EVENT_LV] = MRP_APPLICANT_LA, + [MRP_EVENT_TX] = MRP_APPLICANT_AN, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_VN, + [MRP_EVENT_R_IN] = MRP_APPLICANT_VN, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_VN, + [MRP_EVENT_R_MT] = MRP_APPLICANT_VN, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VN, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VN, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VN, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_VN, + }, + [MRP_APPLICANT_AN] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_AN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_AN, + [MRP_EVENT_LV] = MRP_APPLICANT_LA, + [MRP_EVENT_TX] = MRP_APPLICANT_QA, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_AN, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_AN, + [MRP_EVENT_R_IN] = MRP_APPLICANT_AN, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AN, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AN, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VN, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VN, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VN, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_AN, + }, + [MRP_APPLICANT_AA] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_AA, + [MRP_EVENT_LV] = MRP_APPLICANT_LA, + [MRP_EVENT_TX] = MRP_APPLICANT_QA, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_AA, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_QA, + [MRP_EVENT_R_IN] = MRP_APPLICANT_AA, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AA, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AA, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VP, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VP, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VP, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_AA, + }, + [MRP_APPLICANT_QA] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_QA, + [MRP_EVENT_LV] = MRP_APPLICANT_LA, + [MRP_EVENT_TX] = MRP_APPLICANT_QA, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_QA, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_QA, + [MRP_EVENT_R_IN] = MRP_APPLICANT_QA, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AA, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AA, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VP, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VP, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VP, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_AA, + }, + [MRP_APPLICANT_LA] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_AA, + [MRP_EVENT_LV] = MRP_APPLICANT_LA, + [MRP_EVENT_TX] = MRP_APPLICANT_VO, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_LA, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_LA, + [MRP_EVENT_R_IN] = MRP_APPLICANT_LA, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_LA, + [MRP_EVENT_R_MT] = MRP_APPLICANT_LA, + [MRP_EVENT_R_LV] = MRP_APPLICANT_LA, + [MRP_EVENT_R_LA] = MRP_APPLICANT_LA, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_LA, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_LA, + }, + [MRP_APPLICANT_AO] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_AP, + [MRP_EVENT_LV] = MRP_APPLICANT_AO, + [MRP_EVENT_TX] = MRP_APPLICANT_AO, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_AO, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_QO, + [MRP_EVENT_R_IN] = MRP_APPLICANT_AO, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AO, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AO, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VO, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VO, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VO, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_AO, + }, + [MRP_APPLICANT_QO] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_QP, + [MRP_EVENT_LV] = MRP_APPLICANT_QO, + [MRP_EVENT_TX] = MRP_APPLICANT_QO, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_QO, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_QO, + [MRP_EVENT_R_IN] = MRP_APPLICANT_QO, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AO, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AO, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VO, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VO, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VO, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_QO, + }, + [MRP_APPLICANT_AP] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_AP, + [MRP_EVENT_LV] = MRP_APPLICANT_AO, + [MRP_EVENT_TX] = MRP_APPLICANT_QA, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_AP, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_QP, + [MRP_EVENT_R_IN] = MRP_APPLICANT_AP, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AP, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AP, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VP, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VP, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VP, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_AP, + }, + [MRP_APPLICANT_QP] = { + [MRP_EVENT_NEW] = MRP_APPLICANT_VN, + [MRP_EVENT_JOIN] = MRP_APPLICANT_QP, + [MRP_EVENT_LV] = MRP_APPLICANT_QO, + [MRP_EVENT_TX] = MRP_APPLICANT_QP, + [MRP_EVENT_R_NEW] = MRP_APPLICANT_QP, + [MRP_EVENT_R_JOIN_IN] = MRP_APPLICANT_QP, + [MRP_EVENT_R_IN] = MRP_APPLICANT_QP, + [MRP_EVENT_R_JOIN_MT] = MRP_APPLICANT_AP, + [MRP_EVENT_R_MT] = MRP_APPLICANT_AP, + [MRP_EVENT_R_LV] = MRP_APPLICANT_VP, + [MRP_EVENT_R_LA] = MRP_APPLICANT_VP, + [MRP_EVENT_REDECLARE] = MRP_APPLICANT_VP, + [MRP_EVENT_PERIODIC] = MRP_APPLICANT_AP, + }, +}; + +static const u8 +mrp_tx_action_table[MRP_APPLICANT_MAX + 1] = { + [MRP_APPLICANT_VO] = MRP_TX_ACTION_S_IN_OPTIONAL, + [MRP_APPLICANT_VP] = MRP_TX_ACTION_S_JOIN_IN, + [MRP_APPLICANT_VN] = MRP_TX_ACTION_S_NEW, + [MRP_APPLICANT_AN] = MRP_TX_ACTION_S_NEW, + [MRP_APPLICANT_AA] = MRP_TX_ACTION_S_JOIN_IN, + [MRP_APPLICANT_QA] = MRP_TX_ACTION_S_JOIN_IN_OPTIONAL, + [MRP_APPLICANT_LA] = MRP_TX_ACTION_S_LV, + [MRP_APPLICANT_AO] = MRP_TX_ACTION_S_IN_OPTIONAL, + [MRP_APPLICANT_QO] = MRP_TX_ACTION_S_IN_OPTIONAL, + [MRP_APPLICANT_AP] = MRP_TX_ACTION_S_JOIN_IN, + [MRP_APPLICANT_QP] = MRP_TX_ACTION_S_IN_OPTIONAL, +}; + +static void mrp_attrvalue_inc(void *value, u8 len) +{ + u8 *v = (u8 *)value; + + /* Add 1 to the last byte. If it becomes zero, + * go to the previous byte and repeat. + */ + while (len > 0 && !++v[--len]) + ; +} + +static int mrp_attr_cmp(const struct mrp_attr *attr, + const void *value, u8 len, u8 type) +{ + if (attr->type != type) + return attr->type - type; + if (attr->len != len) + return attr->len - len; + return memcmp(attr->value, value, len); +} + +static struct mrp_attr *mrp_attr_lookup(const struct mrp_applicant *app, + const void *value, u8 len, u8 type) +{ + struct rb_node *parent = app->mad.rb_node; + struct mrp_attr *attr; + int d; + + while (parent) { + attr = rb_entry(parent, struct mrp_attr, node); + d = mrp_attr_cmp(attr, value, len, type); + if (d > 0) + parent = parent->rb_left; + else if (d < 0) + parent = parent->rb_right; + else + return attr; + } + return NULL; +} + +static struct mrp_attr *mrp_attr_create(struct mrp_applicant *app, + const void *value, u8 len, u8 type) +{ + struct rb_node *parent = NULL, **p = &app->mad.rb_node; + struct mrp_attr *attr; + int d; + + while (*p) { + parent = *p; + attr = rb_entry(parent, struct mrp_attr, node); + d = mrp_attr_cmp(attr, value, len, type); + if (d > 0) + p = &parent->rb_left; + else if (d < 0) + p = &parent->rb_right; + else { + /* The attribute already exists; re-use it. */ + return attr; + } + } + attr = kmalloc(sizeof(*attr) + len, GFP_ATOMIC); + if (!attr) + return attr; + attr->state = MRP_APPLICANT_VO; + attr->type = type; + attr->len = len; + memcpy(attr->value, value, len); + + rb_link_node(&attr->node, parent, p); + rb_insert_color(&attr->node, &app->mad); + return attr; +} + +static void mrp_attr_destroy(struct mrp_applicant *app, struct mrp_attr *attr) +{ + rb_erase(&attr->node, &app->mad); + kfree(attr); +} + +static int mrp_pdu_init(struct mrp_applicant *app) +{ + struct sk_buff *skb; + struct mrp_pdu_hdr *ph; + + skb = alloc_skb(app->dev->mtu + LL_RESERVED_SPACE(app->dev), + GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + skb->dev = app->dev; + skb->protocol = app->app->pkttype.type; + skb_reserve(skb, LL_RESERVED_SPACE(app->dev)); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + + ph = (struct mrp_pdu_hdr *)__skb_put(skb, sizeof(*ph)); + ph->version = app->app->version; + + app->pdu = skb; + return 0; +} + +static int mrp_pdu_append_end_mark(struct mrp_applicant *app) +{ + __be16 *endmark; + + if (skb_tailroom(app->pdu) < sizeof(*endmark)) + return -1; + endmark = (__be16 *)__skb_put(app->pdu, sizeof(*endmark)); + put_unaligned(MRP_END_MARK, endmark); + return 0; +} + +static void mrp_pdu_queue(struct mrp_applicant *app) +{ + if (!app->pdu) + return; + + if (mrp_cb(app->pdu)->mh) + mrp_pdu_append_end_mark(app); + mrp_pdu_append_end_mark(app); + + dev_hard_header(app->pdu, app->dev, ntohs(app->app->pkttype.type), + app->app->group_address, app->dev->dev_addr, + app->pdu->len); + + skb_queue_tail(&app->queue, app->pdu); + app->pdu = NULL; +} + +static void mrp_queue_xmit(struct mrp_applicant *app) +{ + struct sk_buff *skb; + + while ((skb = skb_dequeue(&app->queue))) + dev_queue_xmit(skb); +} + +static int mrp_pdu_append_msg_hdr(struct mrp_applicant *app, + u8 attrtype, u8 attrlen) +{ + struct mrp_msg_hdr *mh; + + if (mrp_cb(app->pdu)->mh) { + if (mrp_pdu_append_end_mark(app) < 0) + return -1; + mrp_cb(app->pdu)->mh = NULL; + mrp_cb(app->pdu)->vah = NULL; + } + + if (skb_tailroom(app->pdu) < sizeof(*mh)) + return -1; + mh = (struct mrp_msg_hdr *)__skb_put(app->pdu, sizeof(*mh)); + mh->attrtype = attrtype; + mh->attrlen = attrlen; + mrp_cb(app->pdu)->mh = mh; + return 0; +} + +static int mrp_pdu_append_vecattr_hdr(struct mrp_applicant *app, + const void *firstattrvalue, u8 attrlen) +{ + struct mrp_vecattr_hdr *vah; + + if (skb_tailroom(app->pdu) < sizeof(*vah) + attrlen) + return -1; + vah = (struct mrp_vecattr_hdr *)__skb_put(app->pdu, + sizeof(*vah) + attrlen); + put_unaligned(0, &vah->lenflags); + memcpy(vah->firstattrvalue, firstattrvalue, attrlen); + mrp_cb(app->pdu)->vah = vah; + memcpy(mrp_cb(app->pdu)->attrvalue, firstattrvalue, attrlen); + return 0; +} + +static int mrp_pdu_append_vecattr_event(struct mrp_applicant *app, + const struct mrp_attr *attr, + enum mrp_vecattr_event vaevent) +{ + u16 len, pos; + u8 *vaevents; + int err; +again: + if (!app->pdu) { + err = mrp_pdu_init(app); + if (err < 0) + return err; + } + + /* If there is no Message header in the PDU, or the Message header is + * for a different attribute type, add an EndMark (if necessary) and a + * new Message header to the PDU. + */ + if (!mrp_cb(app->pdu)->mh || + mrp_cb(app->pdu)->mh->attrtype != attr->type || + mrp_cb(app->pdu)->mh->attrlen != attr->len) { + if (mrp_pdu_append_msg_hdr(app, attr->type, attr->len) < 0) + goto queue; + } + + /* If there is no VectorAttribute header for this Message in the PDU, + * or this attribute's value does not sequentially follow the previous + * attribute's value, add a new VectorAttribute header to the PDU. + */ + if (!mrp_cb(app->pdu)->vah || + memcmp(mrp_cb(app->pdu)->attrvalue, attr->value, attr->len)) { + if (mrp_pdu_append_vecattr_hdr(app, attr->value, attr->len) < 0) + goto queue; + } + + len = be16_to_cpu(get_unaligned(&mrp_cb(app->pdu)->vah->lenflags)); + pos = len % 3; + + /* Events are packed into Vectors in the PDU, three to a byte. Add a + * byte to the end of the Vector if necessary. + */ + if (!pos) { + if (skb_tailroom(app->pdu) < sizeof(u8)) + goto queue; + vaevents = (u8 *)__skb_put(app->pdu, sizeof(u8)); + } else { + vaevents = (u8 *)(skb_tail_pointer(app->pdu) - sizeof(u8)); + } + + switch (pos) { + case 0: + *vaevents = vaevent * (__MRP_VECATTR_EVENT_MAX * + __MRP_VECATTR_EVENT_MAX); + break; + case 1: + *vaevents += vaevent * __MRP_VECATTR_EVENT_MAX; + break; + case 2: + *vaevents += vaevent; + break; + default: + WARN_ON(1); + } + + /* Increment the length of the VectorAttribute in the PDU, as well as + * the value of the next attribute that would continue its Vector. + */ + put_unaligned(cpu_to_be16(++len), &mrp_cb(app->pdu)->vah->lenflags); + mrp_attrvalue_inc(mrp_cb(app->pdu)->attrvalue, attr->len); + + return 0; + +queue: + mrp_pdu_queue(app); + goto again; +} + +static void mrp_attr_event(struct mrp_applicant *app, + struct mrp_attr *attr, enum mrp_event event) +{ + enum mrp_applicant_state state; + + state = mrp_applicant_state_table[attr->state][event]; + if (state == MRP_APPLICANT_INVALID) { + WARN_ON(1); + return; + } + + if (event == MRP_EVENT_TX) { + /* When appending the attribute fails, don't update its state + * in order to retry at the next TX event. + */ + + switch (mrp_tx_action_table[attr->state]) { + case MRP_TX_ACTION_NONE: + case MRP_TX_ACTION_S_JOIN_IN_OPTIONAL: + case MRP_TX_ACTION_S_IN_OPTIONAL: + break; + case MRP_TX_ACTION_S_NEW: + if (mrp_pdu_append_vecattr_event( + app, attr, MRP_VECATTR_EVENT_NEW) < 0) + return; + break; + case MRP_TX_ACTION_S_JOIN_IN: + if (mrp_pdu_append_vecattr_event( + app, attr, MRP_VECATTR_EVENT_JOIN_IN) < 0) + return; + break; + case MRP_TX_ACTION_S_LV: + if (mrp_pdu_append_vecattr_event( + app, attr, MRP_VECATTR_EVENT_LV) < 0) + return; + /* As a pure applicant, sending a leave message + * implies that the attribute was unregistered and + * can be destroyed. + */ + mrp_attr_destroy(app, attr); + return; + default: + WARN_ON(1); + } + } + + attr->state = state; +} + +int mrp_request_join(const struct net_device *dev, + const struct mrp_application *appl, + const void *value, u8 len, u8 type) +{ + struct mrp_port *port = rtnl_dereference(dev->mrp_port); + struct mrp_applicant *app = rtnl_dereference( + port->applicants[appl->type]); + struct mrp_attr *attr; + + if (sizeof(struct mrp_skb_cb) + len > + FIELD_SIZEOF(struct sk_buff, cb)) + return -ENOMEM; + + spin_lock_bh(&app->lock); + attr = mrp_attr_create(app, value, len, type); + if (!attr) { + spin_unlock_bh(&app->lock); + return -ENOMEM; + } + mrp_attr_event(app, attr, MRP_EVENT_JOIN); + spin_unlock_bh(&app->lock); + return 0; +} +EXPORT_SYMBOL_GPL(mrp_request_join); + +void mrp_request_leave(const struct net_device *dev, + const struct mrp_application *appl, + const void *value, u8 len, u8 type) +{ + struct mrp_port *port = rtnl_dereference(dev->mrp_port); + struct mrp_applicant *app = rtnl_dereference( + port->applicants[appl->type]); + struct mrp_attr *attr; + + if (sizeof(struct mrp_skb_cb) + len > + FIELD_SIZEOF(struct sk_buff, cb)) + return; + + spin_lock_bh(&app->lock); + attr = mrp_attr_lookup(app, value, len, type); + if (!attr) { + spin_unlock_bh(&app->lock); + return; + } + mrp_attr_event(app, attr, MRP_EVENT_LV); + spin_unlock_bh(&app->lock); +} +EXPORT_SYMBOL_GPL(mrp_request_leave); + +static void mrp_mad_event(struct mrp_applicant *app, enum mrp_event event) +{ + struct rb_node *node, *next; + struct mrp_attr *attr; + + for (node = rb_first(&app->mad); + next = node ? rb_next(node) : NULL, node != NULL; + node = next) { + attr = rb_entry(node, struct mrp_attr, node); + mrp_attr_event(app, attr, event); + } +} + +static void mrp_join_timer_arm(struct mrp_applicant *app) +{ + unsigned long delay; + + delay = (u64)msecs_to_jiffies(mrp_join_time) * net_random() >> 32; + mod_timer(&app->join_timer, jiffies + delay); +} + +static void mrp_join_timer(unsigned long data) +{ + struct mrp_applicant *app = (struct mrp_applicant *)data; + + spin_lock(&app->lock); + mrp_mad_event(app, MRP_EVENT_TX); + mrp_pdu_queue(app); + spin_unlock(&app->lock); + + mrp_queue_xmit(app); + mrp_join_timer_arm(app); +} + +static int mrp_pdu_parse_end_mark(struct sk_buff *skb, int *offset) +{ + __be16 endmark; + + if (skb_copy_bits(skb, *offset, &endmark, sizeof(endmark)) < 0) + return -1; + if (endmark == MRP_END_MARK) { + *offset += sizeof(endmark); + return -1; + } + return 0; +} + +static void mrp_pdu_parse_vecattr_event(struct mrp_applicant *app, + struct sk_buff *skb, + enum mrp_vecattr_event vaevent) +{ + struct mrp_attr *attr; + enum mrp_event event; + + attr = mrp_attr_lookup(app, mrp_cb(skb)->attrvalue, + mrp_cb(skb)->mh->attrlen, + mrp_cb(skb)->mh->attrtype); + if (attr == NULL) + return; + + switch (vaevent) { + case MRP_VECATTR_EVENT_NEW: + event = MRP_EVENT_R_NEW; + break; + case MRP_VECATTR_EVENT_JOIN_IN: + event = MRP_EVENT_R_JOIN_IN; + break; + case MRP_VECATTR_EVENT_IN: + event = MRP_EVENT_R_IN; + break; + case MRP_VECATTR_EVENT_JOIN_MT: + event = MRP_EVENT_R_JOIN_MT; + break; + case MRP_VECATTR_EVENT_MT: + event = MRP_EVENT_R_MT; + break; + case MRP_VECATTR_EVENT_LV: + event = MRP_EVENT_R_LV; + break; + default: + return; + } + + mrp_attr_event(app, attr, event); +} + +static int mrp_pdu_parse_vecattr(struct mrp_applicant *app, + struct sk_buff *skb, int *offset) +{ + struct mrp_vecattr_hdr _vah; + u16 valen; + u8 vaevents, vaevent; + + mrp_cb(skb)->vah = skb_header_pointer(skb, *offset, sizeof(_vah), + &_vah); + if (!mrp_cb(skb)->vah) + return -1; + *offset += sizeof(_vah); + + if (get_unaligned(&mrp_cb(skb)->vah->lenflags) & + MRP_VECATTR_HDR_FLAG_LA) + mrp_mad_event(app, MRP_EVENT_R_LA); + valen = be16_to_cpu(get_unaligned(&mrp_cb(skb)->vah->lenflags) & + MRP_VECATTR_HDR_LEN_MASK); + + /* The VectorAttribute structure in a PDU carries event information + * about one or more attributes having consecutive values. Only the + * value for the first attribute is contained in the structure. So + * we make a copy of that value, and then increment it each time we + * advance to the next event in its Vector. + */ + if (sizeof(struct mrp_skb_cb) + mrp_cb(skb)->mh->attrlen > + FIELD_SIZEOF(struct sk_buff, cb)) + return -1; + if (skb_copy_bits(skb, *offset, mrp_cb(skb)->attrvalue, + mrp_cb(skb)->mh->attrlen) < 0) + return -1; + *offset += mrp_cb(skb)->mh->attrlen; + + /* In a VectorAttribute, the Vector contains events which are packed + * three to a byte. We process one byte of the Vector at a time. + */ + while (valen > 0) { + if (skb_copy_bits(skb, *offset, &vaevents, + sizeof(vaevents)) < 0) + return -1; + *offset += sizeof(vaevents); + + /* Extract and process the first event. */ + vaevent = vaevents / (__MRP_VECATTR_EVENT_MAX * + __MRP_VECATTR_EVENT_MAX); + if (vaevent >= __MRP_VECATTR_EVENT_MAX) { + /* The byte is malformed; stop processing. */ + return -1; + } + mrp_pdu_parse_vecattr_event(app, skb, vaevent); + + /* If present, extract and process the second event. */ + if (!--valen) + break; + mrp_attrvalue_inc(mrp_cb(skb)->attrvalue, + mrp_cb(skb)->mh->attrlen); + vaevents %= (__MRP_VECATTR_EVENT_MAX * + __MRP_VECATTR_EVENT_MAX); + vaevent = vaevents / __MRP_VECATTR_EVENT_MAX; + mrp_pdu_parse_vecattr_event(app, skb, vaevent); + + /* If present, extract and process the third event. */ + if (!--valen) + break; + mrp_attrvalue_inc(mrp_cb(skb)->attrvalue, + mrp_cb(skb)->mh->attrlen); + vaevents %= __MRP_VECATTR_EVENT_MAX; + vaevent = vaevents; + mrp_pdu_parse_vecattr_event(app, skb, vaevent); + } + return 0; +} + +static int mrp_pdu_parse_msg(struct mrp_applicant *app, struct sk_buff *skb, + int *offset) +{ + struct mrp_msg_hdr _mh; + + mrp_cb(skb)->mh = skb_header_pointer(skb, *offset, sizeof(_mh), &_mh); + if (!mrp_cb(skb)->mh) + return -1; + *offset += sizeof(_mh); + + if (mrp_cb(skb)->mh->attrtype == 0 || + mrp_cb(skb)->mh->attrtype > app->app->maxattr || + mrp_cb(skb)->mh->attrlen == 0) + return -1; + + while (skb->len > *offset) { + if (mrp_pdu_parse_end_mark(skb, offset) < 0) + break; + if (mrp_pdu_parse_vecattr(app, skb, offset) < 0) + return -1; + } + return 0; +} + +int mrp_rcv(struct sk_buff *skb, struct net_device *dev, + struct packet_type *pt, struct net_device *orig_dev) +{ + struct mrp_application *appl = container_of(pt, struct mrp_application, + pkttype); + struct mrp_port *port; + struct mrp_applicant *app; + struct mrp_pdu_hdr _ph; + const struct mrp_pdu_hdr *ph; + int offset = skb_network_offset(skb); + + /* If the interface is in promiscuous mode, drop the packet if + * it was unicast to another host. + */ + if (unlikely(skb->pkt_type == PACKET_OTHERHOST)) + goto out; + skb = skb_share_check(skb, GFP_ATOMIC); + if (unlikely(!skb)) + goto out; + port = rcu_dereference(dev->mrp_port); + if (unlikely(!port)) + goto out; + app = rcu_dereference(port->applicants[appl->type]); + if (unlikely(!app)) + goto out; + + ph = skb_header_pointer(skb, offset, sizeof(_ph), &_ph); + if (!ph) + goto out; + offset += sizeof(_ph); + + if (ph->version != app->app->version) + goto out; + + spin_lock(&app->lock); + while (skb->len > offset) { + if (mrp_pdu_parse_end_mark(skb, &offset) < 0) + break; + if (mrp_pdu_parse_msg(app, skb, &offset) < 0) + break; + } + spin_unlock(&app->lock); +out: + kfree_skb(skb); + return 0; +} + +static int mrp_init_port(struct net_device *dev) +{ + struct mrp_port *port; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + rcu_assign_pointer(dev->mrp_port, port); + return 0; +} + +static void mrp_release_port(struct net_device *dev) +{ + struct mrp_port *port = rtnl_dereference(dev->mrp_port); + unsigned int i; + + for (i = 0; i <= MRP_APPLICATION_MAX; i++) { + if (rtnl_dereference(port->applicants[i])) + return; + } + RCU_INIT_POINTER(dev->mrp_port, NULL); + kfree_rcu(port, rcu); +} + +int mrp_init_applicant(struct net_device *dev, struct mrp_application *appl) +{ + struct mrp_applicant *app; + int err; + + ASSERT_RTNL(); + + if (!rtnl_dereference(dev->mrp_port)) { + err = mrp_init_port(dev); + if (err < 0) + goto err1; + } + + err = -ENOMEM; + app = kzalloc(sizeof(*app), GFP_KERNEL); + if (!app) + goto err2; + + err = dev_mc_add(dev, appl->group_address); + if (err < 0) + goto err3; + + app->dev = dev; + app->app = appl; + app->mad = RB_ROOT; + spin_lock_init(&app->lock); + skb_queue_head_init(&app->queue); + rcu_assign_pointer(dev->mrp_port->applicants[appl->type], app); + setup_timer(&app->join_timer, mrp_join_timer, (unsigned long)app); + mrp_join_timer_arm(app); + return 0; + +err3: + kfree(app); +err2: + mrp_release_port(dev); +err1: + return err; +} +EXPORT_SYMBOL_GPL(mrp_init_applicant); + +void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl) +{ + struct mrp_port *port = rtnl_dereference(dev->mrp_port); + struct mrp_applicant *app = rtnl_dereference( + port->applicants[appl->type]); + + ASSERT_RTNL(); + + RCU_INIT_POINTER(port->applicants[appl->type], NULL); + + /* Delete timer and generate a final TX event to flush out + * all pending messages before the applicant is gone. + */ + del_timer_sync(&app->join_timer); + mrp_mad_event(app, MRP_EVENT_TX); + mrp_pdu_queue(app); + mrp_queue_xmit(app); + + dev_mc_del(dev, appl->group_address); + kfree_rcu(app, rcu); + mrp_release_port(dev); +} +EXPORT_SYMBOL_GPL(mrp_uninit_applicant); + +int mrp_register_application(struct mrp_application *appl) +{ + appl->pkttype.func = mrp_rcv; + dev_add_pack(&appl->pkttype); + return 0; +} +EXPORT_SYMBOL_GPL(mrp_register_application); + +void mrp_unregister_application(struct mrp_application *appl) +{ + dev_remove_pack(&appl->pkttype); +} +EXPORT_SYMBOL_GPL(mrp_unregister_application); -- cgit v0.10.2 From 86fbe9bb599fcaf7e92e38dbfdad0414a2d68f7d Mon Sep 17 00:00:00 2001 From: David Ward Date: Fri, 8 Feb 2013 17:17:07 +0000 Subject: net/8021q: Implement Multiple VLAN Registration Protocol (MVRP) Initial implementation of the Multiple VLAN Registration Protocol (MVRP) from IEEE 802.1Q-2011, based on the existing implementation of the GARP VLAN Registration Protocol (GVRP). Signed-off-by: David Ward Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 67fb87c..798032d 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -83,6 +83,7 @@ #define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ #define ETH_P_TIPC 0x88CA /* TIPC */ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h index 0744f8e..7e5e6b3 100644 --- a/include/uapi/linux/if_vlan.h +++ b/include/uapi/linux/if_vlan.h @@ -34,6 +34,7 @@ enum vlan_flags { VLAN_FLAG_REORDER_HDR = 0x1, VLAN_FLAG_GVRP = 0x2, VLAN_FLAG_LOOSE_BINDING = 0x4, + VLAN_FLAG_MVRP = 0x8, }; enum vlan_name_types { diff --git a/net/8021q/Kconfig b/net/8021q/Kconfig index fa073a5..8f7517d 100644 --- a/net/8021q/Kconfig +++ b/net/8021q/Kconfig @@ -27,3 +27,14 @@ config VLAN_8021Q_GVRP automatic propagation of registered VLANs to switches. If unsure, say N. + +config VLAN_8021Q_MVRP + bool "MVRP (Multiple VLAN Registration Protocol) support" + depends on VLAN_8021Q + select MRP + help + Select this to enable MVRP end-system support. MVRP is used for + automatic propagation of registered VLANs to switches; it + supersedes GVRP and is not backwards-compatible. + + If unsure, say N. diff --git a/net/8021q/Makefile b/net/8021q/Makefile index 9f4f174..7bc8db0 100644 --- a/net/8021q/Makefile +++ b/net/8021q/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_VLAN_8021Q) += 8021q.o 8021q-y := vlan.o vlan_dev.o vlan_netlink.o 8021q-$(CONFIG_VLAN_8021Q_GVRP) += vlan_gvrp.o +8021q-$(CONFIG_VLAN_8021Q_MVRP) += vlan_mvrp.o 8021q-$(CONFIG_PROC_FS) += vlanproc.o diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index addc578..a187144 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -95,6 +95,8 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head) grp->nr_vlan_devs--; + if (vlan->flags & VLAN_FLAG_MVRP) + vlan_mvrp_request_leave(dev); if (vlan->flags & VLAN_FLAG_GVRP) vlan_gvrp_request_leave(dev); @@ -107,8 +109,10 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head) netdev_upper_dev_unlink(real_dev, dev); - if (grp->nr_vlan_devs == 0) + if (grp->nr_vlan_devs == 0) { + vlan_mvrp_uninit_applicant(real_dev); vlan_gvrp_uninit_applicant(real_dev); + } /* Get rid of the vlan's reference to real_dev */ dev_put(real_dev); @@ -151,15 +155,18 @@ int register_vlan_dev(struct net_device *dev) err = vlan_gvrp_init_applicant(real_dev); if (err < 0) goto out_vid_del; + err = vlan_mvrp_init_applicant(real_dev); + if (err < 0) + goto out_uninit_gvrp; } err = vlan_group_prealloc_vid(grp, vlan_id); if (err < 0) - goto out_uninit_applicant; + goto out_uninit_mvrp; err = netdev_upper_dev_link(real_dev, dev); if (err) - goto out_uninit_applicant; + goto out_uninit_mvrp; err = register_netdevice(dev); if (err < 0) @@ -181,7 +188,10 @@ int register_vlan_dev(struct net_device *dev) out_upper_dev_unlink: netdev_upper_dev_unlink(real_dev, dev); -out_uninit_applicant: +out_uninit_mvrp: + if (grp->nr_vlan_devs == 0) + vlan_mvrp_uninit_applicant(real_dev); +out_uninit_gvrp: if (grp->nr_vlan_devs == 0) vlan_gvrp_uninit_applicant(real_dev); out_vid_del: @@ -655,13 +665,19 @@ static int __init vlan_proto_init(void) if (err < 0) goto err3; - err = vlan_netlink_init(); + err = vlan_mvrp_init(); if (err < 0) goto err4; + err = vlan_netlink_init(); + if (err < 0) + goto err5; + vlan_ioctl_set(vlan_ioctl_handler); return 0; +err5: + vlan_mvrp_uninit(); err4: vlan_gvrp_uninit(); err3: @@ -682,6 +698,7 @@ static void __exit vlan_cleanup_module(void) unregister_pernet_subsys(&vlan_net_ops); rcu_barrier(); /* Wait for completion of call_rcu()'s */ + vlan_mvrp_uninit(); vlan_gvrp_uninit(); } diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h index a4886d9..670f1e8 100644 --- a/net/8021q/vlan.h +++ b/net/8021q/vlan.h @@ -171,6 +171,22 @@ static inline int vlan_gvrp_init(void) { return 0; } static inline void vlan_gvrp_uninit(void) {} #endif +#ifdef CONFIG_VLAN_8021Q_MVRP +extern int vlan_mvrp_request_join(const struct net_device *dev); +extern void vlan_mvrp_request_leave(const struct net_device *dev); +extern int vlan_mvrp_init_applicant(struct net_device *dev); +extern void vlan_mvrp_uninit_applicant(struct net_device *dev); +extern int vlan_mvrp_init(void); +extern void vlan_mvrp_uninit(void); +#else +static inline int vlan_mvrp_request_join(const struct net_device *dev) { return 0; } +static inline void vlan_mvrp_request_leave(const struct net_device *dev) {} +static inline int vlan_mvrp_init_applicant(struct net_device *dev) { return 0; } +static inline void vlan_mvrp_uninit_applicant(struct net_device *dev) {} +static inline int vlan_mvrp_init(void) { return 0; } +static inline void vlan_mvrp_uninit(void) {} +#endif + extern const char vlan_fullname[]; extern const char vlan_version[]; extern int vlan_netlink_init(void); diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 09f9108..34df5b3 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -261,7 +261,7 @@ int vlan_dev_change_flags(const struct net_device *dev, u32 flags, u32 mask) u32 old_flags = vlan->flags; if (mask & ~(VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP | - VLAN_FLAG_LOOSE_BINDING)) + VLAN_FLAG_LOOSE_BINDING | VLAN_FLAG_MVRP)) return -EINVAL; vlan->flags = (old_flags & ~mask) | (flags & mask); @@ -272,6 +272,13 @@ int vlan_dev_change_flags(const struct net_device *dev, u32 flags, u32 mask) else vlan_gvrp_request_leave(dev); } + + if (netif_running(dev) && (vlan->flags ^ old_flags) & VLAN_FLAG_MVRP) { + if (vlan->flags & VLAN_FLAG_MVRP) + vlan_mvrp_request_join(dev); + else + vlan_mvrp_request_leave(dev); + } return 0; } @@ -312,6 +319,9 @@ static int vlan_dev_open(struct net_device *dev) if (vlan->flags & VLAN_FLAG_GVRP) vlan_gvrp_request_join(dev); + if (vlan->flags & VLAN_FLAG_MVRP) + vlan_mvrp_request_join(dev); + if (netif_carrier_ok(real_dev)) netif_carrier_on(dev); return 0; diff --git a/net/8021q/vlan_mvrp.c b/net/8021q/vlan_mvrp.c new file mode 100644 index 0000000..d9ec1d5 --- /dev/null +++ b/net/8021q/vlan_mvrp.c @@ -0,0 +1,72 @@ +/* + * IEEE 802.1Q Multiple VLAN Registration Protocol (MVRP) + * + * Copyright (c) 2012 Massachusetts Institute of Technology + * + * Adapted from code in net/8021q/vlan_gvrp.c + * Copyright (c) 2008 Patrick McHardy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include "vlan.h" + +#define MRP_MVRP_ADDRESS { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x21 } + +enum mvrp_attributes { + MVRP_ATTR_INVALID, + MVRP_ATTR_VID, + __MVRP_ATTR_MAX +}; +#define MVRP_ATTR_MAX (__MVRP_ATTR_MAX - 1) + +static struct mrp_application vlan_mrp_app __read_mostly = { + .type = MRP_APPLICATION_MVRP, + .maxattr = MVRP_ATTR_MAX, + .pkttype.type = htons(ETH_P_MVRP), + .group_address = MRP_MVRP_ADDRESS, + .version = 0, +}; + +int vlan_mvrp_request_join(const struct net_device *dev) +{ + const struct vlan_dev_priv *vlan = vlan_dev_priv(dev); + __be16 vlan_id = htons(vlan->vlan_id); + + return mrp_request_join(vlan->real_dev, &vlan_mrp_app, + &vlan_id, sizeof(vlan_id), MVRP_ATTR_VID); +} + +void vlan_mvrp_request_leave(const struct net_device *dev) +{ + const struct vlan_dev_priv *vlan = vlan_dev_priv(dev); + __be16 vlan_id = htons(vlan->vlan_id); + + mrp_request_leave(vlan->real_dev, &vlan_mrp_app, + &vlan_id, sizeof(vlan_id), MVRP_ATTR_VID); +} + +int vlan_mvrp_init_applicant(struct net_device *dev) +{ + return mrp_init_applicant(dev, &vlan_mrp_app); +} + +void vlan_mvrp_uninit_applicant(struct net_device *dev) +{ + mrp_uninit_applicant(dev, &vlan_mrp_app); +} + +int __init vlan_mvrp_init(void) +{ + return mrp_register_application(&vlan_mrp_app); +} + +void vlan_mvrp_uninit(void) +{ + mrp_unregister_application(&vlan_mrp_app); +} diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c index 708c80e..1789658 100644 --- a/net/8021q/vlan_netlink.c +++ b/net/8021q/vlan_netlink.c @@ -62,7 +62,7 @@ static int vlan_validate(struct nlattr *tb[], struct nlattr *data[]) flags = nla_data(data[IFLA_VLAN_FLAGS]); if ((flags->flags & flags->mask) & ~(VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP | - VLAN_FLAG_LOOSE_BINDING)) + VLAN_FLAG_LOOSE_BINDING | VLAN_FLAG_MVRP)) return -EINVAL; } -- cgit v0.10.2 From f45a5c267da35174e22cec955093a7513dc1623d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 8 Feb 2013 20:10:49 +0000 Subject: veth: fix NULL dereference in veth_dellink() commit d0e2c55e7c940 (veth: avoid a NULL deref in veth_stats_one) added another NULL deref in veth_dellink(). # ip link add name veth1 type veth peer name veth0 # rmmod veth We crash because veth_dellink() is called twice, so we must take care of NULL peer. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index e1da42a..07a4af0 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -426,12 +426,13 @@ static void veth_dellink(struct net_device *dev, struct list_head *head) * not being freed before one RCU grace period. */ RCU_INIT_POINTER(priv->peer, NULL); - - priv = netdev_priv(peer); - RCU_INIT_POINTER(priv->peer, NULL); - unregister_netdevice_queue(dev, head); - unregister_netdevice_queue(peer, head); + + if (peer) { + priv = netdev_priv(peer); + RCU_INIT_POINTER(priv->peer, NULL); + unregister_netdevice_queue(peer, head); + } } static const struct nla_policy veth_policy[VETH_INFO_MAX + 1] = { -- cgit v0.10.2 From ec16ef2228829698fdbd2f6b160ff52551a6bf8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sat, 9 Feb 2013 04:29:58 +0000 Subject: ipv6 mcast: Do not join device multicast for interface-local multicasts. RFC4291 (IPv6 addressing architecture) says that interface-Local scope spans only a single interface on a node. We should not join L2 device multicast list for addresses in interface-local (or smaller) scope. Signed-off-by: YOSHIFUJI Hideaki Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index e5de4855..3a2849f 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -661,6 +661,10 @@ static void igmp6_group_added(struct ifmcaddr6 *mc) struct net_device *dev = mc->idev->dev; char buf[MAX_ADDR_LEN]; + if (IPV6_ADDR_MC_SCOPE(&mc->mca_addr) < + IPV6_ADDR_SCOPE_LINKLOCAL) + return; + spin_lock_bh(&mc->mca_lock); if (!(mc->mca_flags&MAF_LOADED)) { mc->mca_flags |= MAF_LOADED; @@ -687,6 +691,10 @@ static void igmp6_group_dropped(struct ifmcaddr6 *mc) struct net_device *dev = mc->idev->dev; char buf[MAX_ADDR_LEN]; + if (IPV6_ADDR_MC_SCOPE(&mc->mca_addr) < + IPV6_ADDR_SCOPE_LINKLOCAL) + return; + spin_lock_bh(&mc->mca_lock); if (mc->mca_flags&MAF_LOADED) { mc->mca_flags &= ~MAF_LOADED; -- cgit v0.10.2 From daaba4fa17d7826807b0b131f796543b4099ef4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sat, 9 Feb 2013 07:00:59 +0000 Subject: net neighbour, decnet: Ensure to align device private data on preferred alignment. To allow both of protocol-specific data and device-specific data attached with neighbour entry, and to eliminate size calculation cost when allocating entry, sizeof protocol-speicic data must be multiple of NEIGH_PRIV_ALIGN. On 64bit archs, sizeof(struct dn_neigh) is multiple of NEIGH_PRIV_ALIGN, but on 32bit archs, it was not. Introduce NEIGH_ENTRY_SPACE() macro to ensure that protocol-specific entry-size meets our requirement. Reported-by: Fengguang Wu Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 629ee57..7e748ad 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -181,6 +181,7 @@ struct neigh_table { }; #define NEIGH_PRIV_ALIGN sizeof(long long) +#define NEIGH_ENTRY_SIZE(size) ALIGN((size), NEIGH_PRIV_ALIGN) static inline void *neighbour_priv(const struct neighbour *n) { diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c index 3aede1b..856636a 100644 --- a/net/decnet/dn_neigh.c +++ b/net/decnet/dn_neigh.c @@ -95,7 +95,7 @@ static u32 dn_neigh_hash(const void *pkey, struct neigh_table dn_neigh_table = { .family = PF_DECnet, - .entry_size = sizeof(struct dn_neigh), + .entry_size = NEIGH_ENTRY_SIZE(sizeof(struct dn_neigh)), .key_len = sizeof(__le16), .hash = dn_neigh_hash, .constructor = dn_neigh_construct, -- cgit v0.10.2 From d5fcff04fca9287af3764fb6d32378504ea18582 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Sat, 9 Feb 2013 09:29:48 +0000 Subject: qlcnic: fix initialize NIC mailbox command Register for firmware based Inter Driver Communication (IDC) using initialize NIC as the first mailbox command Signed-off-by: Himanshu Madhani Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index cdcbbb0..d23372e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1239,10 +1239,10 @@ void qlcnic_83xx_register_nic_idc_func(struct qlcnic_adapter *adapter, if (enable) { qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INIT_NIC_FUNC); - cmd.req.arg[1] = 1 | BIT_0; + cmd.req.arg[1] = BIT_0 | BIT_31; } else { qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_STOP_NIC_FUNC); - cmd.req.arg[1] = 0 | BIT_0; + cmd.req.arg[1] = BIT_0 | BIT_31; } status = qlcnic_issue_cmd(adapter, &cmd); if (status) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index f647002..c53832b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -585,6 +585,9 @@ static int qlcnic_83xx_idc_check_fan_failure(struct qlcnic_adapter *adapter) static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter) { + /* register for NIC IDC AEN Events */ + qlcnic_83xx_register_nic_idc_func(adapter, 1); + qlcnic_83xx_enable_mbx_intrpt(adapter); if ((adapter->flags & QLCNIC_MSIX_ENABLED)) { if (qlcnic_83xx_config_intrpt(adapter, 1)) { @@ -2025,6 +2028,9 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter) set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); qlcnic_83xx_clear_function_resources(adapter); + /* register for NIC IDC AEN Events */ + qlcnic_83xx_register_nic_idc_func(adapter, 1); + if (!qlcnic_83xx_read_flash_descriptor_table(adapter)) qlcnic_83xx_read_flash_mfg_id(adapter); @@ -2041,9 +2047,6 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter) INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work); - /* register for NIC IDC AEN Events */ - qlcnic_83xx_register_nic_idc_func(adapter, 1); - /* Periodically monitor device status */ qlcnic_83xx_idc_poll_dev_state(&adapter->fw_work.work); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index d0aef32..714124a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1174,8 +1174,6 @@ qlcnic_set_mgmt_operations(struct qlcnic_adapter *adapter) qlcnic_dev_set_npar_ready(adapter); - if (qlcnic_83xx_check(adapter)) - qlcnic_83xx_register_nic_idc_func(adapter, 1); return err; } @@ -3063,6 +3061,8 @@ static int qlcnic_attach_func(struct pci_dev *pdev) } if (qlcnic_83xx_check(adapter)) { + /* register for NIC IDC AEN Events */ + qlcnic_83xx_register_nic_idc_func(adapter, 1); err = qlcnic_83xx_setup_mbx_intr(adapter); if (err) { dev_err(&adapter->pdev->dev, @@ -3224,6 +3224,8 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data, size_t len) } if (qlcnic_83xx_check(adapter)) { + /* register for NIC IDC AEN Events */ + qlcnic_83xx_register_nic_idc_func(adapter, 1); err = qlcnic_83xx_setup_mbx_intr(adapter); if (err) { dev_err(&adapter->pdev->dev, -- cgit v0.10.2 From 3d73b5fda45a4288856020527f1dbf4efd8c9a7a Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Sat, 9 Feb 2013 09:29:49 +0000 Subject: qlcnic: fix firmware based IDC participation Driver needs to stop participating in firmware based Inter Driver Communication (IDC) while unloading driver Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 714124a..dcb990d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2023,6 +2023,8 @@ static void qlcnic_remove(struct pci_dev *pdev) if (adapter->flags & QLCNIC_MSIX_ENABLED) qlcnic_83xx_config_intrpt(adapter, 0); qlcnic_83xx_free_mbx_intr(adapter); + qlcnic_83xx_register_nic_idc_func(adapter, 0); + cancel_delayed_work_sync(&adapter->idc_aen_work); } qlcnic_detach(adapter); @@ -2180,10 +2182,6 @@ static int qlcnic_close(struct net_device *netdev) struct qlcnic_adapter *adapter = netdev_priv(netdev); __qlcnic_down(adapter, netdev); - if (qlcnic_83xx_check(adapter)) { - qlcnic_83xx_register_nic_idc_func(adapter, 0); - cancel_delayed_work_sync(&adapter->idc_aen_work); - } return 0; } @@ -3117,6 +3115,8 @@ static pci_ers_result_t qlcnic_io_error_detected(struct pci_dev *pdev, if (adapter->flags & QLCNIC_MSIX_ENABLED) qlcnic_83xx_config_intrpt(adapter, 0); qlcnic_83xx_free_mbx_intr(adapter); + qlcnic_83xx_register_nic_idc_func(adapter, 0); + cancel_delayed_work_sync(&adapter->idc_aen_work); } qlcnic_detach(adapter); -- cgit v0.10.2 From 483202d590cd76fc794f3aa11a342b718a804a28 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Sat, 9 Feb 2013 09:29:50 +0000 Subject: qlcnic: helper routine to handle async events Create a helper routine to handle async events, as it is being called from multiple places Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index d23372e..3d628c6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -12,13 +12,6 @@ #include #define QLCNIC_MAX_TX_QUEUES 1 - -#define QLCNIC_MBX_RSP(reg) LSW(reg) -#define QLCNIC_MBX_NUM_REGS(reg) (MSW(reg) & 0x1FF) -#define QLCNIC_MBX_STATUS(reg) (((reg) >> 25) & 0x7F) -#define QLCNIC_MBX_HOST(ahw, i) ((ahw)->pci_base0 + ((i) * 4)) -#define QLCNIC_MBX_FW(ahw, i) ((ahw)->pci_base0 + 0x800 + ((i) * 4)) - #define RSS_HASHTYPE_IP_TCP 0x3 /* status descriptor mailbox data @@ -696,7 +689,7 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, int i; u16 opcode; u8 mbx_err_code, mac_cmd_rcode; - u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, temp, fw[8]; + u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd; struct qlcnic_hardware_context *ahw = adapter->ahw; opcode = LSW(cmd->req.arg[0]); @@ -738,42 +731,8 @@ poll: opcode = QLCNIC_MBX_RSP(fw_data); if (rsp != QLCNIC_RCODE_TIMEOUT) { - if (opcode == QLCNIC_MBX_LINK_EVENT) { - for (i = 0; i < rsp_num; i++) { - temp = readl(QLCNIC_MBX_FW(ahw, i)); - fw[i] = temp; - } - qlcnic_83xx_handle_link_aen(adapter, fw); - /* clear fw mbx control register */ - QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); - mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); - if (mbx_val) - goto poll; - } else if (opcode == QLCNIC_MBX_COMP_EVENT) { - for (i = 0; i < rsp_num; i++) { - temp = readl(QLCNIC_MBX_FW(ahw, i)); - fw[i] = temp; - } - qlcnic_83xx_handle_idc_comp_aen(adapter, fw); - /* clear fw mbx control register */ - QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); - mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); - if (mbx_val) - goto poll; - } else if (opcode == QLCNIC_MBX_REQUEST_EVENT) { - /* IDC Request Notification */ - for (i = 0; i < rsp_num; i++) { - temp = readl(QLCNIC_MBX_FW(ahw, i)); - fw[i] = temp; - } - for (i = 0; i < QLC_83XX_MBX_AEN_CNT; i++) { - temp = QLCNIC_MBX_RSP(fw[i]); - adapter->ahw->mbox_aen[i] = temp; - } - queue_delayed_work(adapter->qlcnic_wq, - &adapter->idc_aen_work, 0); - /* clear fw mbx control register */ - QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); + if (fw_data & QLCNIC_MBX_ASYNC_EVENT) { + qlcnic_83xx_process_aen(adapter); mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); if (mbx_val) goto poll; @@ -875,20 +834,10 @@ static void qlcnic_83xx_handle_idc_comp_aen(struct qlcnic_adapter *adapter, void qlcnic_83xx_process_aen(struct qlcnic_adapter *adapter) { - u32 mask, resp, event[QLC_83XX_MBX_AEN_CNT]; + u32 event[QLC_83XX_MBX_AEN_CNT]; int i; struct qlcnic_hardware_context *ahw = adapter->ahw; - if (!spin_trylock(&ahw->mbx_lock)) { - mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); - writel(0, adapter->ahw->pci_base0 + mask); - return; - } - resp = QLCRDX(ahw, QLCNIC_FW_MBX_CTRL); - - if (!(resp & QLCNIC_SET_OWNER)) - goto out; - for (i = 0; i < QLC_83XX_MBX_AEN_CNT; i++) event[i] = readl(QLCNIC_MBX_FW(ahw, i)); @@ -923,10 +872,6 @@ void qlcnic_83xx_process_aen(struct qlcnic_adapter *adapter) } QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); -out: - mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); - writel(0, adapter->ahw->pci_base0 + mask); - spin_unlock(&ahw->mbx_lock); } static int qlcnic_83xx_add_rings(struct qlcnic_adapter *adapter) @@ -1620,7 +1565,21 @@ static void qlcnic_83xx_handle_link_aen(struct qlcnic_adapter *adapter, irqreturn_t qlcnic_83xx_handle_aen(int irq, void *data) { struct qlcnic_adapter *adapter = data; - qlcnic_83xx_process_aen(adapter); + unsigned long flags; + u32 mask, resp, event; + + spin_lock_irqsave(&adapter->ahw->mbx_lock, flags); + resp = QLCRDX(adapter->ahw, QLCNIC_FW_MBX_CTRL); + if (!(resp & QLCNIC_SET_OWNER)) + goto out; + event = readl(QLCNIC_MBX_FW(adapter->ahw, 0)); + if (event & QLCNIC_MBX_ASYNC_EVENT) + qlcnic_83xx_process_aen(adapter); +out: + mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); + writel(0, adapter->ahw->pci_base0 + mask); + spin_unlock_irqrestore(&adapter->ahw->mbx_lock, flags); + return IRQ_HANDLED; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index b62017b..16c5df6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -137,9 +137,6 @@ struct qlc_83xx_reset { #define QLC_83XX_IDC_MINOR_VERSION 0 #define QLC_83XX_IDC_FLASH_PARAM_ADDR 0x3e8020 -/* Mailbox process AEN count */ -#define QLC_83XX_MBX_AEN_CNT 5 - struct qlcnic_adapter; struct qlc_83xx_idc { int (*state_entry) (struct qlcnic_adapter *); @@ -156,6 +153,12 @@ struct qlc_83xx_idc { char **name; }; +#define QLCNIC_MBX_RSP(reg) LSW(reg) +#define QLCNIC_MBX_NUM_REGS(reg) (MSW(reg) & 0x1FF) +#define QLCNIC_MBX_STATUS(reg) (((reg) >> 25) & 0x7F) +#define QLCNIC_MBX_HOST(ahw, i) ((ahw)->pci_base0 + ((i) * 4)) +#define QLCNIC_MBX_FW(ahw, i) ((ahw)->pci_base0 + 0x800 + ((i) * 4)) + /* Mailbox process AEN count */ #define QLC_83XX_IDC_COMP_AEN 3 #define QLC_83XX_MBX_AEN_CNT 5 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index ed52b9c..5b8749e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -135,6 +135,7 @@ struct qlcnic_mailbox_metadata { #define QLCNIC_MBX_RSP_OK 1 #define QLCNIC_MBX_PORT_RSP_OK 0x1a +#define QLCNIC_MBX_ASYNC_EVENT BIT_15 struct qlcnic_pci_info; struct qlcnic_info; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index bb4311e..bc38eaf 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1553,6 +1553,24 @@ skip: return count; } +static void qlcnic_83xx_poll_process_aen(struct qlcnic_adapter *adapter) +{ + unsigned long flags; + u32 mask, resp, event; + + spin_lock_irqsave(&adapter->ahw->mbx_lock, flags); + resp = QLCRDX(adapter->ahw, QLCNIC_FW_MBX_CTRL); + if (!(resp & QLCNIC_SET_OWNER)) + goto out; + event = readl(QLCNIC_MBX_FW(adapter->ahw, 0)); + if (event & QLCNIC_MBX_ASYNC_EVENT) + qlcnic_83xx_process_aen(adapter); +out: + mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); + writel(0, adapter->ahw->pci_base0 + mask); + spin_unlock_irqrestore(&adapter->ahw->mbx_lock, flags); +} + static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) { int tx_complete; @@ -1567,7 +1585,7 @@ static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) tx_ring = adapter->tx_ring; if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) - qlcnic_83xx_process_aen(adapter); + qlcnic_83xx_poll_process_aen(adapter); tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); -- cgit v0.10.2 From ba4468dbf3364c35652dda14e2ef90c5cf09ab16 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Sat, 9 Feb 2013 09:29:51 +0000 Subject: qlcnic: refactor 83xx diagnostic loopback test Cleanly separate 83xx diagnostic loopback test routines from 82xx Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 3a840e7..61b594c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1442,7 +1442,9 @@ int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter); void qlcnic_update_cmd_producer(struct qlcnic_host_tx_ring *); /* Functions from qlcnic_ethtool.c */ -int qlcnic_check_loopback_buff(unsigned char *data, u8 mac[]); +int qlcnic_check_loopback_buff(unsigned char *, u8 []); +int qlcnic_do_lb_test(struct qlcnic_adapter *, u8); +int qlcnic_loopback_test(struct net_device *, u8); /* Functions from qlcnic_main.c */ int qlcnic_reset_context(struct qlcnic_adapter *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 3d628c6..3d48131 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -257,8 +257,6 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { .config_intr_coal = qlcnic_83xx_config_intr_coal, .config_rss = qlcnic_83xx_config_rss, .config_hw_lro = qlcnic_83xx_config_hw_lro, - .config_loopback = qlcnic_83xx_set_lb_mode, - .clear_loopback = qlcnic_83xx_clear_lb_mode, .config_promisc_mode = qlcnic_83xx_nic_set_promisc, .change_l2_filter = qlcnic_83xx_change_l2_filter, .get_board_info = qlcnic_83xx_get_port_info, @@ -1118,6 +1116,100 @@ out: return err; } +static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_host_rds_ring *rds_ring; + u8 ring; + int ret; + + netif_device_detach(netdev); + + if (netif_running(netdev)) + __qlcnic_down(adapter, netdev); + + qlcnic_detach(adapter); + + adapter->max_sds_rings = 1; + adapter->ahw->diag_test = test; + adapter->ahw->linkup = 0; + + ret = qlcnic_attach(adapter); + if (ret) { + netif_device_attach(netdev); + return ret; + } + + ret = qlcnic_fw_create_ctx(adapter); + if (ret) { + qlcnic_detach(adapter); + netif_device_attach(netdev); + return ret; + } + + for (ring = 0; ring < adapter->max_rds_rings; ring++) { + rds_ring = &adapter->recv_ctx->rds_rings[ring]; + qlcnic_post_rx_buffers(adapter, rds_ring, ring); + } + + if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &adapter->recv_ctx->sds_rings[ring]; + qlcnic_83xx_enable_intr(adapter, sds_ring); + } + } + + if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) { + /* disable and free mailbox interrupt */ + qlcnic_83xx_free_mbx_intr(adapter); + adapter->ahw->loopback_state = 0; + adapter->ahw->hw_ops->setup_link_event(adapter, 1); + } + + set_bit(__QLCNIC_DEV_UP, &adapter->state); + return 0; +} + +static void qlcnic_83xx_diag_free_res(struct net_device *netdev, + int max_sds_rings) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_host_sds_ring *sds_ring; + int ring, err; + + clear_bit(__QLCNIC_DEV_UP, &adapter->state); + if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &adapter->recv_ctx->sds_rings[ring]; + writel(1, sds_ring->crb_intr_mask); + } + } + + qlcnic_fw_destroy_ctx(adapter); + qlcnic_detach(adapter); + + if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) { + err = qlcnic_83xx_setup_mbx_intr(adapter); + if (err) { + dev_err(&adapter->pdev->dev, + "%s: failed to setup mbx interrupt\n", + __func__); + goto out; + } + } + adapter->ahw->diag_test = 0; + adapter->max_sds_rings = max_sds_rings; + + if (qlcnic_attach(adapter)) + goto out; + + if (netif_running(netdev)) + __qlcnic_up(adapter, netdev); +out: + netif_device_attach(netdev); +} + int qlcnic_83xx_config_led(struct qlcnic_adapter *adapter, u32 state, u32 beacon) { @@ -1265,6 +1357,57 @@ int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode) return err; } +int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_hardware_context *ahw = adapter->ahw; + int ret = 0, loop = 0, max_sds_rings = adapter->max_sds_rings; + + QLCDB(adapter, DRV, "%s loopback test in progress\n", + mode == QLCNIC_ILB_MODE ? "internal" : "external"); + if (ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { + dev_warn(&adapter->pdev->dev, + "Loopback test not supported for non privilege function\n"); + return ret; + } + + if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) + return -EBUSY; + + ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST); + if (ret) + goto fail_diag_alloc; + + ret = qlcnic_83xx_set_lb_mode(adapter, mode); + if (ret) + goto free_diag_res; + + /* Poll for link up event before running traffic */ + do { + msleep(500); + qlcnic_83xx_process_aen(adapter); + if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { + dev_info(&adapter->pdev->dev, + "Firmware didn't sent link up event to loopback request\n"); + ret = -QLCNIC_FW_NOT_RESPOND; + qlcnic_83xx_clear_lb_mode(adapter, mode); + goto free_diag_res; + } + } while ((adapter->ahw->linkup && ahw->has_link_events) != 1); + + ret = qlcnic_do_lb_test(adapter, mode); + + qlcnic_83xx_clear_lb_mode(adapter, mode); + +free_diag_res: + qlcnic_83xx_diag_free_res(netdev, max_sds_rings); + +fail_diag_alloc: + adapter->max_sds_rings = max_sds_rings; + clear_bit(__QLCNIC_RESETTING, &adapter->state); + return ret; +} + int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) { struct qlcnic_hardware_context *ahw = adapter->ahw; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 16c5df6..87f2e08 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -428,6 +428,7 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *); int qlcnic_83xx_reg_test(struct qlcnic_adapter *); int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *); int qlcnic_83xx_get_registers(struct qlcnic_adapter *, u32 *); +int qlcnic_83xx_loopback_test(struct net_device *, u8); int qlcnic_83xx_interrupt_test(struct qlcnic_adapter *, struct qlcnic_cmd_args *); int qlcnic_83xx_flash_test(struct qlcnic_adapter *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 6320d55..58e2554 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -883,7 +883,7 @@ int qlcnic_check_loopback_buff(unsigned char *data, u8 mac[]) return memcmp(data, buff, QLCNIC_ILB_PKT_SIZE); } -static int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode) +int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode) { struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; struct qlcnic_host_sds_ring *sds_ring = &recv_ctx->sds_rings[0]; @@ -925,7 +925,7 @@ static int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode) return 0; } -static int qlcnic_loopback_test(struct net_device *netdev, u8 mode) +int qlcnic_loopback_test(struct net_device *netdev, u8 mode) { struct qlcnic_adapter *adapter = netdev_priv(netdev); int max_sds_rings = adapter->max_sds_rings; @@ -935,13 +935,14 @@ static int qlcnic_loopback_test(struct net_device *netdev, u8 mode) int ret; if (qlcnic_83xx_check(adapter)) - goto skip_cap; + return qlcnic_83xx_loopback_test(netdev, mode); + if (!(ahw->capabilities & QLCNIC_FW_CAPABILITY_MULTI_LOOPBACK)) { dev_info(&adapter->pdev->dev, "Firmware do not support loopback test\n"); return -EOPNOTSUPP; } -skip_cap: + dev_warn(&adapter->pdev->dev, "%s loopback test in progress\n", mode == QLCNIC_ILB_MODE ? "internal" : "external"); if (ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { @@ -962,9 +963,6 @@ skip_cap: if (ret) goto free_res; - if (qlcnic_83xx_check(adapter)) - goto skip_fw_msg; - ahw->diag_cnt = 0; do { msleep(500); @@ -979,21 +977,9 @@ skip_cap: goto free_res; } } while (!QLCNIC_IS_LB_CONFIGURED(ahw->loopback_state)); -skip_fw_msg: - if (qlcnic_83xx_check(adapter)) { - /* wait until firmware report link up before running traffic */ - loop = 0; - do { - msleep(500); - if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { - dev_info(&adapter->pdev->dev, - "No linkup event after LB req\n"); - ret = -QLCNIC_FW_NOT_RESPOND; - goto free_res; - } - } while ((adapter->ahw->linkup && ahw->has_link_events) != 1); - } + ret = qlcnic_do_lb_test(adapter, mode); + qlcnic_clear_lb_mode(adapter, mode); free_res: diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index dcb990d..30aa1f2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1503,10 +1503,7 @@ void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings) if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - if (qlcnic_83xx_check(adapter)) - writel(1, sds_ring->crb_intr_mask); - else - qlcnic_disable_int(sds_ring); + qlcnic_disable_int(sds_ring); } } @@ -1599,10 +1596,7 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test) if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - if (qlcnic_82xx_check(adapter)) - qlcnic_enable_int(sds_ring); - else - qlcnic_83xx_enable_intr(adapter, sds_ring); + qlcnic_enable_int(sds_ring); } } -- cgit v0.10.2 From 58ead415a1a7d6800ed4eb3eeed12daedc27ffe6 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Sat, 9 Feb 2013 09:29:52 +0000 Subject: qlcnic: refactor 83xx diagnostic IRQ test Cleanly separate 83xx diagnostic IRQ test from 82xx Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 3d48131..36c1474 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2744,25 +2744,37 @@ int qlcnic_83xx_get_registers(struct qlcnic_adapter *adapter, u32 *regs_buff) return i; } -int qlcnic_83xx_interrupt_test(struct qlcnic_adapter *adapter, - struct qlcnic_cmd_args *cmd) +int qlcnic_83xx_interrupt_test(struct net_device *netdev) { - u8 val; - int ret; + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_hardware_context *ahw = adapter->ahw; + struct qlcnic_cmd_args cmd; u32 data; u16 intrpt_id, id; + u8 val; + int ret, max_sds_rings = adapter->max_sds_rings; + + if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) + return -EIO; + + ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST); + if (ret) + goto fail_diag_irq; + + ahw->diag_cnt = 0; + qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST); if (adapter->flags & QLCNIC_MSIX_ENABLED) - intrpt_id = adapter->ahw->intr_tbl[0].id; + intrpt_id = ahw->intr_tbl[0].id; else - intrpt_id = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_ID); + intrpt_id = QLCRDX(ahw, QLCNIC_DEF_INT_ID); - cmd->req.arg[1] = 1; - cmd->req.arg[2] = intrpt_id; - cmd->req.arg[3] = BIT_0; + cmd.req.arg[1] = 1; + cmd.req.arg[2] = intrpt_id; + cmd.req.arg[3] = BIT_0; - ret = qlcnic_issue_cmd(adapter, cmd); - data = cmd->rsp.arg[2]; + ret = qlcnic_issue_cmd(adapter, &cmd); + data = cmd.rsp.arg[2]; id = LSW(data); val = LSB(MSW(data)); if (id != intrpt_id) @@ -2770,9 +2782,21 @@ int qlcnic_83xx_interrupt_test(struct qlcnic_adapter *adapter, "Interrupt generated: 0x%x, requested:0x%x\n", id, intrpt_id); if (val) - dev_info(&adapter->pdev->dev, + dev_err(&adapter->pdev->dev, "Interrupt test error: 0x%x\n", val); + if (ret) + goto done; + + msleep(20); + ret = !ahw->diag_cnt; +done: + qlcnic_free_mbx_args(&cmd); + qlcnic_83xx_diag_free_res(netdev, max_sds_rings); + +fail_diag_irq: + adapter->max_sds_rings = max_sds_rings; + clear_bit(__QLCNIC_RESETTING, &adapter->state); return ret; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 87f2e08..f60e28a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -429,7 +429,6 @@ int qlcnic_83xx_reg_test(struct qlcnic_adapter *); int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *); int qlcnic_83xx_get_registers(struct qlcnic_adapter *, u32 *); int qlcnic_83xx_loopback_test(struct net_device *, u8); -int qlcnic_83xx_interrupt_test(struct qlcnic_adapter *, - struct qlcnic_cmd_args *); +int qlcnic_83xx_interrupt_test(struct net_device *); int qlcnic_83xx_flash_test(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 58e2554..5641f8e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -823,38 +823,36 @@ static int qlcnic_get_sset_count(struct net_device *dev, int sset) static int qlcnic_irq_test(struct net_device *netdev) { struct qlcnic_adapter *adapter = netdev_priv(netdev); - int max_sds_rings = adapter->max_sds_rings; - int ret; + struct qlcnic_hardware_context *ahw = adapter->ahw; struct qlcnic_cmd_args cmd; + int ret, max_sds_rings = adapter->max_sds_rings; + + if (qlcnic_83xx_check(adapter)) + return qlcnic_83xx_interrupt_test(netdev); if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) return -EIO; ret = qlcnic_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST); if (ret) - goto clear_it; + goto clear_diag_irq; - adapter->ahw->diag_cnt = 0; + ahw->diag_cnt = 0; qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST); - if (qlcnic_83xx_check(adapter)) { - ret = qlcnic_83xx_interrupt_test(adapter, &cmd); - } else { - cmd.req.arg[1] = adapter->ahw->pci_func; - ret = qlcnic_issue_cmd(adapter, &cmd); - } - + cmd.req.arg[1] = ahw->pci_func; + ret = qlcnic_issue_cmd(adapter, &cmd); if (ret) goto done; usleep_range(1000, 12000); - ret = !adapter->ahw->diag_cnt; + ret = !ahw->diag_cnt; done: qlcnic_free_mbx_args(&cmd); qlcnic_diag_free_res(netdev, max_sds_rings); -clear_it: +clear_diag_irq: adapter->max_sds_rings = max_sds_rings; clear_bit(__QLCNIC_RESETTING, &adapter->state); return ret; -- cgit v0.10.2 From 9a05f92bbb46211b315222f4cf70731a97f932ed Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Sat, 9 Feb 2013 09:29:53 +0000 Subject: qlcnic: fix async event handling during diagnostic loopback test o Handle async events during diagnostic loopback test o Clear loopback mode on failure to receive async events Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 36c1474..51b4340 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1436,13 +1436,15 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode) return status; } - /* Wait until firmware send IDC Completion AEN */ + /* Wait for Link and IDC Completion AEN */ do { msleep(300); + qlcnic_83xx_process_aen(adapter); if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { dev_err(&adapter->pdev->dev, "FW did not generate IDC completion AEN\n"); clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status); + qlcnic_83xx_clear_lb_mode(adapter, mode); return -EIO; } } while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status)); @@ -1474,9 +1476,10 @@ int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode) return status; } - /* Wait until firmware send IDC Completion AEN */ + /* Wait for Link and IDC Completion AEN */ do { msleep(300); + qlcnic_83xx_process_aen(adapter); if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) { dev_err(&adapter->pdev->dev, "Firmware didn't sent IDC completion AEN\n"); -- cgit v0.10.2 From dce056cb215e4803ed6e9efffd03705ca0671913 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Sat, 9 Feb 2013 09:29:54 +0000 Subject: qlcnic: enhance MSIX allocation failure log message Signed-off-by: Manish Chopra Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 30aa1f2..b745194 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -455,12 +455,13 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix) if (num_msix) { dev_info(&pdev->dev, - "Trying %d MSI-X interrupt vectors\n", + "Trying to allocate %d MSI-X interrupt vectors\n", num_msix); goto enable_msix; } } else { - dev_info(&pdev->dev, "Failed to get %d vectors\n", + dev_info(&pdev->dev, + "Unable to allocate %d MSI-X interrupt vectors\n", num_msix); } } -- cgit v0.10.2 From 65ab999da808f72e3fe82be8f7d35050d3126005 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Sat, 9 Feb 2013 09:29:55 +0000 Subject: qlcnic: fix mailbox response handling o Do not read mailbox registers on timeout o Add a helper function to handle mailbox response Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 51b4340..f7b39d1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -664,6 +664,21 @@ static void qlcnic_dump_mbx(struct qlcnic_adapter *adapter, pr_info("\n"); } +/* Mailbox response for mac rcode */ +static u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *adapter) +{ + u32 fw_data; + u8 mac_cmd_rcode; + + fw_data = readl(QLCNIC_MBX_FW(adapter->ahw, 2)); + mac_cmd_rcode = (u8)fw_data; + if (mac_cmd_rcode == QLC_83XX_NO_NIC_RESOURCE || + mac_cmd_rcode == QLC_83XX_MAC_PRESENT || + mac_cmd_rcode == QLC_83XX_MAC_ABSENT) + return QLCNIC_RCODE_SUCCESS; + return 1; +} + static u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter) { u32 data; @@ -686,7 +701,7 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, { int i; u16 opcode; - u8 mbx_err_code, mac_cmd_rcode; + u8 mbx_err_code; u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd; struct qlcnic_hardware_context *ahw = adapter->ahw; @@ -722,45 +737,44 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, QLCWRX(ahw, QLCNIC_HOST_MBX_CTRL, QLCNIC_SET_OWNER); poll: rsp = qlcnic_83xx_mbx_poll(adapter); - /* Get the FW response data */ - fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); - mbx_err_code = QLCNIC_MBX_STATUS(fw_data); - rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); - opcode = QLCNIC_MBX_RSP(fw_data); - if (rsp != QLCNIC_RCODE_TIMEOUT) { + /* Get the FW response data */ + fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); if (fw_data & QLCNIC_MBX_ASYNC_EVENT) { qlcnic_83xx_process_aen(adapter); mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); if (mbx_val) goto poll; - } else if ((mbx_err_code == QLCNIC_MBX_RSP_OK) || - (mbx_err_code == QLCNIC_MBX_PORT_RSP_OK)) { - qlcnic_83xx_get_mbx_data(adapter, cmd); + } + mbx_err_code = QLCNIC_MBX_STATUS(fw_data); + rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); + opcode = QLCNIC_MBX_RSP(fw_data); + qlcnic_83xx_get_mbx_data(adapter, cmd); + + switch (mbx_err_code) { + case QLCNIC_MBX_RSP_OK: + case QLCNIC_MBX_PORT_RSP_OK: rsp = QLCNIC_RCODE_SUCCESS; - } else { - qlcnic_83xx_get_mbx_data(adapter, cmd); + break; + default: if (opcode == QLCNIC_CMD_CONFIG_MAC_VLAN) { - fw_data = readl(QLCNIC_MBX_FW(ahw, 2)); - mac_cmd_rcode = (u8)fw_data; - if (mac_cmd_rcode == QLC_83XX_NO_NIC_RESOURCE || - mac_cmd_rcode == QLC_83XX_MAC_PRESENT || - mac_cmd_rcode == QLC_83XX_MAC_ABSENT) { - rsp = QLCNIC_RCODE_SUCCESS; + rsp = qlcnic_83xx_mac_rcode(adapter); + if (!rsp) goto out; - } } - dev_info(&adapter->pdev->dev, - "MBX command 0x%x failed with err:0x%x\n", - opcode, mbx_err_code); + dev_err(&adapter->pdev->dev, + "MBX command 0x%x failed with err:0x%x\n", + opcode, mbx_err_code); rsp = mbx_err_code; qlcnic_dump_mbx(adapter, cmd); + break; } - } else { - dev_info(&adapter->pdev->dev, - "MBX command 0x%x timed out\n", opcode); - qlcnic_dump_mbx(adapter, cmd); + goto out; } + + dev_err(&adapter->pdev->dev, "MBX command 0x%x timed out\n", + QLCNIC_MBX_RSP(mbx_cmd)); + rsp = QLCNIC_RCODE_TIMEOUT; out: /* clear fw mbx control register */ QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); -- cgit v0.10.2 From 35adfd6e458741d3d3fca1ce0e342919eb250c2b Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Mon, 4 Feb 2013 13:16:24 +0200 Subject: iwlwifi: mvm: Update quota settings for all bindings The FW scheduler, schedules the bindings over a session of 128 fragments (each is 4 TU long). The quota command should allocate all the session fragments between all the bindings that require quota allocation. Currently, use static allocation, where the fragments are equally distributed between all data bindings. Note, that not allocating all the session's fragments might cause the FW scheduler to leave the medium unused. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 9fd49db..23eebda 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -633,6 +633,9 @@ struct iwl_binding_cmd { __le32 phy; } __packed; /* BINDING_CMD_API_S_VER_1 */ +/* The maximal number of fragments in the FW's schedule session */ +#define IWL_MVM_MAX_QUOTA 128 + /** * struct iwl_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c index 2d4611a..9256284 100644 --- a/drivers/net/wireless/iwlwifi/mvm/quota.c +++ b/drivers/net/wireless/iwlwifi/mvm/quota.c @@ -131,7 +131,7 @@ static void iwl_mvm_quota_iterator(void *_data, u8 *mac, int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif) { struct iwl_time_quota_cmd cmd; - int i, idx, ret; + int i, idx, ret, num_active_bindings, quota, quota_rem; struct iwl_mvm_quota_iterator_data data = { .n_interfaces = {}, .colors = { -1, -1, -1, -1 }, @@ -156,20 +156,39 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif) iwl_mvm_quota_iterator(&data, newvif->addr, newvif); } + /* + * The FW's scheduling session consists of + * IWL_MVM_MAX_QUOTA fragments. Divide these fragments + * equally between all the bindings that require quota + */ + num_active_bindings = 0; + for (i = 0; i < MAX_BINDINGS; i++) { + cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID); + if (data.n_interfaces[i] > 0) + num_active_bindings++; + } + + if (!num_active_bindings) + goto send_cmd; + + quota = IWL_MVM_MAX_QUOTA / num_active_bindings; + quota_rem = IWL_MVM_MAX_QUOTA % num_active_bindings; + for (idx = 0, i = 0; i < MAX_BINDINGS; i++) { if (data.n_interfaces[i] <= 0) continue; cmd.quotas[idx].id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(i, data.colors[i])); - cmd.quotas[idx].quota = cpu_to_le32(100); - cmd.quotas[idx].max_duration = cpu_to_le32(1000); + cmd.quotas[idx].quota = cpu_to_le32(quota); + cmd.quotas[idx].max_duration = cpu_to_le32(IWL_MVM_MAX_QUOTA); idx++; } - for (i = idx; i < MAX_BINDINGS; i++) - cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID); + /* Give the remainder of the session to the first binding */ + le32_add_cpu(&cmd.quotas[0].quota, quota_rem); +send_cmd: ret = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, CMD_SYNC, sizeof(cmd), &cmd); if (ret) -- cgit v0.10.2 From 456f6ddf9cfd876a60df259dbe4f3cb943e773b4 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Mon, 4 Feb 2013 14:09:37 +0200 Subject: iwlwifi: mvm: Change the Time Event type used for ROC The TE_P2P_DEVICE_DISCOVERABLE time event type used for ROC is assigned low priority in the FW, and thus has low chance of being scheduled when there are active BSS or GO VMACs (even if fragmentation is allowed). This is mainly problematic in for cases where ROC is requested for sending action frames. To overcome this, use a time event type that has priority equal to that ot the time event type used by the FW to action scan. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index b9f076f..4d62a5d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -76,6 +76,15 @@ #define TU_TO_JIFFIES(_tu) (usecs_to_jiffies((_tu) * 1024)) #define MSEC_TO_TU(_msec) (_msec*1000/1024) +/* For ROC use a TE type which has priority high enough to be scheduled when + * there is a concurrent BSS or GO/AP. Currently, use a TE type that has + * priority similar to the TE priority used for action scans by the FW. + * TODO: This needs to be changed, based on the reason for the ROC, i.e., use + * TE_P2P_DEVICE_DISCOVERABLE for remain on channel without mgmt skb, and use + * TE_P2P_DEVICE_ACTION_SCAN + */ +#define IWL_MVM_ROC_TE_TYPE TE_P2P_DEVICE_ACTION_SCAN + void iwl_mvm_te_clear_data(struct iwl_mvm *mvm, struct iwl_mvm_time_event_data *te_data) { @@ -436,7 +445,7 @@ static bool iwl_mvm_roc_te_notif(struct iwl_notif_wait_data *notif_wait, u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); /* until we do something else */ - WARN_ON(te_data->id != TE_P2P_DEVICE_DISCOVERABLE); + WARN_ON(te_data->id != IWL_MVM_ROC_TE_TYPE); switch (pkt->hdr.cmd) { case TIME_EVENT_CMD: @@ -483,7 +492,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); time_cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); - time_cmd.id = cpu_to_le32(TE_P2P_DEVICE_DISCOVERABLE); + time_cmd.id = cpu_to_le32(IWL_MVM_ROC_TE_TYPE); time_cmd.apply_time = cpu_to_le32(0); time_cmd.dep_policy = cpu_to_le32(TE_INDEPENDENT); @@ -492,7 +501,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, time_cmd.interval = cpu_to_le32(1); /* - * TE_P2P_DEVICE_DISCOVERABLE can have lower priority than other events + * IWL_MVM_ROC_TE_TYPE can have lower priority than other events * that are being scheduled by the driver/fw, and thus it might not be * scheduled. To improve the chances of it being scheduled, allow it to * be fragmented. -- cgit v0.10.2 From 8115efbdc82acc935b54f0a849eb834129ea1fd0 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 5 Feb 2013 10:08:35 +0200 Subject: iwlwifi: mvm: fix the keyidx assignment Fixes an issue that smatch pointed out: 1118 1119 key_flags = cpu_to_le16(keyconf->keyidx & STA_KEY_FLG_KEYID_MSK); ^^^^^^^^^^^^^^^ This is s8. ^^^^^^^^^^^^^^^^^^^^^ STA_KEY_FLG_KEYID_MSK is 0x300. The result after the bitwise AND is always zero because 0xff & 0x300. Reported-by: Dan Carpenter Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 69603c3..8f8b66e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1116,7 +1116,8 @@ int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, if (WARN_ON_ONCE(mvm_sta->vif != vif)) return -EINVAL; - key_flags = cpu_to_le16(keyconf->keyidx & STA_KEY_FLG_KEYID_MSK); + key_flags = cpu_to_le16((keyconf->keyidx << STA_KEY_FLG_KEYID_POS) & + STA_KEY_FLG_KEYID_MSK); key_flags |= cpu_to_le16(STA_KEY_FLG_NO_ENC | STA_KEY_FLG_WEP_KEY_MAP); key_flags |= cpu_to_le16(STA_KEY_NOT_VALID); -- cgit v0.10.2 From c3eb536aabb966542a0b6b09ad38cc43abe9ad1a Mon Sep 17 00:00:00 2001 From: Beni Lev Date: Wed, 6 Feb 2013 17:22:18 +0200 Subject: iwlwifi: mvm: fix TKIP key updating When a TKIP key is updated with a station pointer that is NULL it is a GTK, so it should use the AP's station ID. Fix the code to do that. Signed-off-by: Beni Lev Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 8f8b66e..6b22bac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1155,14 +1155,26 @@ void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) { - struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + struct iwl_mvm_sta *mvm_sta; u8 sta_id = iwl_mvm_get_key_sta_id(vif, sta); - if (sta_id == IWL_INVALID_STATION) + if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION)) return; + rcu_read_lock(); + + if (!sta) { + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + if (WARN_ON(IS_ERR_OR_NULL(sta))) { + rcu_read_unlock(); + return; + } + } + + mvm_sta = (void *)sta->drv_priv; iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf, sta_id, iv32, phase1key, CMD_ASYNC); + rcu_read_unlock(); } void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id) -- cgit v0.10.2 From a3777e0fdd4abb2f04202580c236d64ecdaac6f2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 13:07:08 +0200 Subject: iwlwifi: mvm: fix locking in iwl_mvm_ipv6_addr_change inet6_dev->lock can be taken from a timer. Disabled bottom halves when we take it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 9a95c37..5b2c675 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -97,14 +97,14 @@ void iwl_mvm_ipv6_addr_change(struct ieee80211_hw *hw, struct inet6_ifaddr *ifa; int idx = 0; - read_lock(&idev->lock); + read_lock_bh(&idev->lock); list_for_each_entry(ifa, &idev->addr_list, if_list) { mvmvif->target_ipv6_addrs[idx] = ifa->addr; idx++; if (idx >= IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS) break; } - read_unlock(&idev->lock); + read_unlock_bh(&idev->lock); mvmvif->num_target_ipv6_addrs = idx; } -- cgit v0.10.2 From 7cb8a93968e395e40a72a50da0b6114e752304b4 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 11 Feb 2013 07:02:36 +0100 Subject: xfrm: Allow inserting policies with matching mark and different priorities We currently can not insert policies with mark and mask such that some flows would be matched from both policies. We make this possible when the priority of these policies are different. If both policies match a flow, the one with the higher priority is used. Reported-by: Emmanuel Thierry Reported-by: Romain Kuntz Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 456b11b..257dfb1 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -607,6 +607,21 @@ static void xfrm_policy_requeue(struct xfrm_policy *old, spin_unlock_bh(&pq->hold_queue.lock); } +static bool xfrm_policy_mark_match(struct xfrm_policy *policy, + struct xfrm_policy *pol) +{ + u32 mark = policy->mark.v & policy->mark.m; + + if (policy->mark.v == pol->mark.v && policy->mark.m == pol->mark.m) + return true; + + if ((mark & pol->mark.m) == pol->mark.v && + policy->priority == pol->priority) + return true; + + return false; +} + int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) { struct net *net = xp_net(policy); @@ -614,7 +629,6 @@ int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) struct xfrm_policy *delpol; struct hlist_head *chain; struct hlist_node *entry, *newpos; - u32 mark = policy->mark.v & policy->mark.m; write_lock_bh(&xfrm_policy_lock); chain = policy_hash_bysel(net, &policy->selector, policy->family, dir); @@ -623,7 +637,7 @@ int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) hlist_for_each_entry(pol, entry, chain, bydst) { if (pol->type == policy->type && !selector_cmp(&pol->selector, &policy->selector) && - (mark & pol->mark.m) == pol->mark.v && + xfrm_policy_mark_match(policy, pol) && xfrm_sec_ctx_match(pol->security, policy->security) && !WARN_ON(delpol)) { if (excl) { -- cgit v0.10.2 From cd48d8ba149484c4723a2b75159deeb83f3d2273 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 11 Feb 2013 10:30:04 +0100 Subject: NFC: microread: Fix mei physical layer The MEI bus API changed according to the latest comments from the char-misc maintainers, and this patch fixes the microread mei physical layer code according to those changes: We pass the MEI id back to the probe routine, and the mei_driver takes a table of MEI ids instead of one static id. Also, mei_bus_driver got renamed to mei_driver, mei_bus_client to mei_device, and mei_bus_set/get_clientdata to mei_set/get_clientdata. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index c078e56..eef38cf 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -48,7 +48,7 @@ struct mei_nfc_hdr { #define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD) struct microread_mei_phy { - struct mei_bus_client *client; + struct mei_device *mei_device; struct nfc_hci_dev *hdev; int powered; @@ -105,14 +105,14 @@ static int microread_mei_write(void *phy_id, struct sk_buff *skb) MEI_DUMP_SKB_OUT("mei frame sent", skb); - r = mei_bus_send(phy->client, skb->data, skb->len); + r = mei_send(phy->device, skb->data, skb->len); if (r > 0) r = 0; return r; } -static void microread_event_cb(struct mei_bus_client *client, u32 events, +static void microread_event_cb(struct mei_device *device, u32 events, void *context) { struct microread_mei_phy *phy = context; @@ -120,7 +120,7 @@ static void microread_event_cb(struct mei_bus_client *client, u32 events, if (phy->hard_fault != 0) return; - if (events & BIT(MEI_BUS_EVENT_RX)) { + if (events & BIT(MEI_EVENT_RX)) { struct sk_buff *skb; int reply_size; @@ -128,7 +128,7 @@ static void microread_event_cb(struct mei_bus_client *client, u32 events, if (!skb) return; - reply_size = mei_bus_recv(client, skb->data, MEI_NFC_MAX_READ); + reply_size = mei_recv(device, skb->data, MEI_NFC_MAX_READ); if (reply_size < MEI_NFC_HEADER_SIZE) { kfree(skb); return; @@ -149,7 +149,8 @@ static struct nfc_phy_ops mei_phy_ops = { .disable = microread_mei_disable, }; -static int microread_mei_probe(struct mei_bus_client *client) +static int microread_mei_probe(struct mei_device *device, + const struct mei_id *id) { struct microread_mei_phy *phy; int r; @@ -162,10 +163,10 @@ static int microread_mei_probe(struct mei_bus_client *client) return -ENOMEM; } - phy->client = client; - mei_bus_set_clientdata(client, phy); + phy->device = device; + mei_set_clientdata(device, phy); - r = mei_bus_register_event_cb(client, microread_event_cb, phy); + r = mei_register_event_cb(device, microread_event_cb, phy); if (r) { pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); goto err_out; @@ -185,9 +186,9 @@ err_out: return r; } -static int microread_mei_remove(struct mei_bus_client *client) +static int microread_mei_remove(struct mei_device *device) { - struct microread_mei_phy *phy = mei_bus_get_clientdata(client); + struct microread_mei_phy *phy = mei_get_clientdata(device); pr_info("Removing microread\n"); @@ -201,14 +202,18 @@ static int microread_mei_remove(struct mei_bus_client *client) return 0; } -static struct mei_bus_driver microread_driver = { - .driver = { - .name = MICROREAD_DRIVER_NAME, - }, - .id = { - .name = MICROREAD_DRIVER_NAME, - .uuid = MICROREAD_UUID, - }, +static struct mei_id microread_mei_tbl[] = { + { MICROREAD_DRIVER_NAME, MICROREAD_UUID }, + + /* required last entry */ + { } +}; + +MODULE_DEVICE_TABLE(mei, microread_mei_tbl); + +static struct mei_driver microread_driver = { + .id_table = microread_mei_tbl, + .name = MICROREAD_DRIVER_NAME, .probe = microread_mei_probe, .remove = microread_mei_remove, -- cgit v0.10.2 From b7566fc363e23f0efd3fa1e1460f9421cdc0d77e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 4 Feb 2013 15:33:44 -0600 Subject: cfg80211: Fix memory leak When a driver requests a specific regulatory domain after cfg80211 already has one, a struct ieee80211_regdomain is leaked. Reported-by: Larry Finger Tested-by: Larry Finger Signed-off-by: Larry Finger Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6ea626b..08d3da2 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2189,10 +2189,15 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * However if a driver requested this specific regulatory * domain we keep it for its private use */ - if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) { + const struct ieee80211_regdomain *tmp; + + tmp = get_wiphy_regdom(request_wiphy); rcu_assign_pointer(request_wiphy->regd, rd); - else + rcu_free_regdom(tmp); + } else { kfree(rd); + } rd = NULL; -- cgit v0.10.2 From bba87ffe606b7fc5fba73d1c0c5ac1eacd2cebe8 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Sun, 3 Feb 2013 08:28:27 +0200 Subject: cfg80211: fix radar check for P2P_DEVICE Radar is not required for P2P_DEVICE interfaces. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index d7873c7..37a56ee 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1217,10 +1217,10 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, break; case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_DEVICE: case NL80211_IFTYPE_MONITOR: radar_required = false; break; - case NL80211_IFTYPE_P2P_DEVICE: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_UNSPECIFIED: default: -- cgit v0.10.2 From 5b112d3d098c97b867cc580f590395cd1e72f18c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:49:58 +0100 Subject: cfg80211: pass wiphy to cfg80211_ref_bss/put_bss This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao [mwifiex] Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4225cca..a7fb442 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -767,7 +767,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel, ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n", nw_type & ADHOC_CREATOR ? "creator" : "joiner"); cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); return; } @@ -778,7 +778,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel, assoc_req_ie, assoc_req_len, assoc_resp_ie, assoc_resp_len, WLAN_STATUS_SUCCESS, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); } else if (vif->sme_state == SME_CONNECTED) { /* inform roam event to cfg80211 */ cfg80211_roamed_bss(vif->ndev, bss, assoc_req_ie, assoc_req_len, diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 998f8b0..d366cf1 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -1108,7 +1108,7 @@ static int ath6kl_wmi_bssinfo_event_rx(struct wmi *wmi, u8 *datap, int len, kfree(mgmt); if (bss == NULL) return -ENOMEM; - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); /* * Firmware doesn't return any event when scheduled scan has diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 002851f..9ecc196 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -341,7 +341,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy, } out: - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); return rc; } diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 0b70e17..79d608c 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -338,7 +338,7 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) if (bss) { wil_dbg_wmi(wil, "Added BSS %pM\n", rx_mgmt_frame->bssid); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } else { wil_err(wil, "cfg80211_inform_bss() failed\n"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 481f41a..cecc3ef 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2323,7 +2323,7 @@ static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg, if (!bss) return -ENOMEM; - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); return err; } @@ -2429,7 +2429,7 @@ static s32 wl_inform_ibss(struct brcmf_cfg80211_info *cfg, goto CleanUp; } - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); CleanUp: diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 230f8eb..61735db 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -657,7 +657,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, capa, intvl, ie, ielen, LBS_SCAN_RSSI_TO_MBM(rssi), GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } } else lbs_deb_scan("scan response: missing BSS channel IE\n"); @@ -1444,7 +1444,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, done: if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; } @@ -1766,7 +1766,7 @@ static void lbs_join_post(struct lbs_private *priv, params->beacon_interval, fake_ie, fake - fake_ie, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); priv->wdev->ssid_len = params->ssid_len; @@ -2011,7 +2011,7 @@ static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, if (bss) { ret = lbs_ibss_join_existing(priv, params, bss); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } else ret = lbs_ibss_start_new(priv, params); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 3a004b8..81c84a2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1430,7 +1430,7 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv) bss = cfg80211_inform_bss(priv->wdev->wiphy, chan, bss_info.bssid, 0, WLAN_CAPABILITY_IBSS, 0, ie_buf, ie_len, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN); return 0; diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 9189a32..2324924 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1746,7 +1746,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, .mac_address, ETH_ALEN)) mwifiex_update_curr_bss_params(priv, bss); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); } } else { dev_dbg(adapter->dev, "missing BSS channel IE\n"); diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index f542bb8..ee85b41 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -324,7 +324,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, } if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->adapter->wiphy, bss); } else { /* Adhoc mode */ /* If the requested SSID matches current SSID, return */ @@ -354,7 +354,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, " list. Joining...\n"); ret = mwifiex_adhoc_join(priv, bss_desc); if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->adapter->wiphy, bss); } else { dev_dbg(adapter->dev, "info: Network not found in " "the list, creating adhoc with ssid = %s\n", diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c index 96e39ed..e8c5714 100644 --- a/drivers/net/wireless/orinoco/scan.c +++ b/drivers/net/wireless/orinoco/scan.c @@ -125,7 +125,7 @@ static void orinoco_add_hostscan_result(struct orinoco_private *priv, cbss = cfg80211_inform_bss(wiphy, channel, bss->a.bssid, timestamp, capability, beacon_interval, ie_buf, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(cbss); + cfg80211_put_bss(wiphy, cbss); } void orinoco_add_extscan_result(struct orinoco_private *priv, @@ -158,7 +158,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv, cbss = cfg80211_inform_bss(wiphy, channel, bss->bssid, timestamp, capability, beacon_interval, ie, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(cbss); + cfg80211_put_bss(wiphy, cbss); } void orinoco_add_hostscan_results(struct orinoco_private *priv, diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index abe1d03..fe2f272 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2029,7 +2029,7 @@ static bool rndis_bss_info_update(struct usbnet *usbdev, bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid->mac, timestamp, capability, beacon_interval, ie, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev.wiphy, bss); return (bss != NULL); } @@ -2718,7 +2718,7 @@ static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid, bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid, timestamp, capability, beacon_period, ie_buf, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev.wiphy, bss); } /* diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 18c06a5..a233f64 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -424,7 +424,7 @@ int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) goto exit; } - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } if (result) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3ec70e1..691b347 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3166,19 +3166,21 @@ cfg80211_get_ibss(struct wiphy *wiphy, /** * cfg80211_ref_bss - reference BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct to reference * * Increments the refcount of the given BSS struct. */ -void cfg80211_ref_bss(struct cfg80211_bss *bss); +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_put_bss - unref BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct * * Decrements the refcount of the given BSS struct. */ -void cfg80211_put_bss(struct cfg80211_bss *bss); +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_unlink_bss - unlink BSS from internal data structures diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a54c824..71c55cc 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -228,7 +228,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, bss = cfg80211_inform_bss_frame(local->hw.wiphy, chan, mgmt, skb->len, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(local->hw.wiphy, bss); netif_carrier_on(sdata->dev); cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); } @@ -1159,7 +1159,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) if (cbss) { cfg80211_unlink_bss(local->hw.wiphy, cbss); - cfg80211_put_bss(cbss); + cfg80211_put_bss(local->hw.wiphy, cbss); } } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 353b690..15f2edd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1934,7 +1934,7 @@ static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, ieee80211_vif_release_channel(sdata); } - cfg80211_put_bss(auth_data->bss); + cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); kfree(auth_data); sdata->u.mgd.auth_data = NULL; } @@ -2387,7 +2387,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) { /* oops -- internal error -- send timeout for now */ ieee80211_destroy_assoc_data(sdata, false); - cfg80211_put_bss(*bss); + cfg80211_put_bss(sdata->local->hw.wiphy, *bss); return RX_MGMT_CFG80211_ASSOC_TIMEOUT; } sdata_info(sdata, "associated\n"); @@ -3831,7 +3831,7 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, } /* hold our own reference */ - cfg80211_ref_bss(auth_data->bss); + cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); err = 0; goto out_unlock; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 7f80f0a..400153f 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -34,7 +34,8 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local, { if (!bss) return; - cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv)); + cfg80211_put_bss(local->hw.wiphy, + container_of((void *)bss, struct cfg80211_bss, priv)); } static bool is_uapsd_supported(struct ieee802_11_elems *elems) diff --git a/net/wireless/core.c b/net/wireless/core.c index ce82724..f0a1bbe 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -715,7 +715,7 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev) kfree(reg); } list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list) - cfg80211_put_bss(&scan->pub); + cfg80211_put_bss(&rdev->wiphy, &scan->pub); kfree(rdev); } diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index 9b9551e..d80e471 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -37,7 +37,7 @@ void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid) if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } cfg80211_hold_bss(bss_from_pub(bss)); @@ -182,7 +182,7 @@ static void __cfg80211_clear_ibss(struct net_device *dev, bool nowext) if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } wdev->current_bss = NULL; diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index fee9bf7..8e69207 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -58,7 +58,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, */ if (status_code != WLAN_STATUS_SUCCESS && wdev->conn && cfg80211_sme_failed_reassoc(wdev)) { - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); goto out; } @@ -70,7 +70,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, * do not call connect_result() now because the * sme will schedule work that does it later. */ - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); goto out; } @@ -108,7 +108,7 @@ void __cfg80211_send_deauth(struct net_device *dev, if (wdev->current_bss && ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; was_current = true; } @@ -164,7 +164,7 @@ void __cfg80211_send_disassoc(struct net_device *dev, ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { cfg80211_sme_disassoc(dev, wdev->current_bss); cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } else WARN_ON(1); @@ -324,7 +324,7 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, err = rdev_auth(rdev, dev, &req); out: - cfg80211_put_bss(req.bss); + cfg80211_put_bss(&rdev->wiphy, req.bss); return err; } @@ -432,7 +432,7 @@ out: if (err) { if (was_connected) wdev->sme_state = CFG80211_SME_CONNECTED; - cfg80211_put_bss(req.bss); + cfg80211_put_bss(&rdev->wiphy, req.bss); } return err; @@ -572,7 +572,7 @@ void cfg80211_mlme_down(struct cfg80211_registered_device *rdev, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(&rdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } } diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 36daacb..dacb44a 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -818,7 +818,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_inform_bss_frame); -void cfg80211_ref_bss(struct cfg80211_bss *pub) +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { struct cfg80211_internal_bss *bss; @@ -830,7 +830,7 @@ void cfg80211_ref_bss(struct cfg80211_bss *pub) } EXPORT_SYMBOL(cfg80211_ref_bss); -void cfg80211_put_bss(struct cfg80211_bss *pub) +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { struct cfg80211_internal_bss *bss; diff --git a/net/wireless/sme.c b/net/wireless/sme.c index a825dfe..f432bd3 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -301,7 +301,7 @@ static void __cfg80211_sme_scan_done(struct net_device *dev) bss = cfg80211_get_conn_bss(wdev); if (bss) { - cfg80211_put_bss(bss); + cfg80211_put_bss(&rdev->wiphy, bss); } else { /* not found */ if (wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) @@ -464,7 +464,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } @@ -480,7 +480,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, kfree(wdev->connect_keys); wdev->connect_keys = NULL; wdev->ssid_len = 0; - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); return; } @@ -586,7 +586,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev, } cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; cfg80211_hold_bss(bss_from_pub(bss)); @@ -621,7 +621,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev, return; out: - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); } void cfg80211_roamed(struct net_device *dev, @@ -663,7 +663,7 @@ void cfg80211_roamed_bss(struct net_device *dev, ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); if (!ev) { - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); return; } @@ -704,7 +704,7 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } wdev->current_bss = NULL; @@ -875,7 +875,7 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev, if (bss) { wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; err = cfg80211_conn_do_work(wdev); - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); } else { /* otherwise we'll need to scan for the AP first */ err = cfg80211_conn_scan(wdev); -- cgit v0.10.2 From 077f897a8be9c617e69035af4d17a472d4af272b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 09:06:36 +0100 Subject: wireless: fix kernel-doc Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 691b347..5d8554b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -535,7 +535,7 @@ struct mac_address { * struct cfg80211_acl_data - Access control list data * * @acl_policy: ACL policy to be applied on the station's - entry specified by mac_addr + * entry specified by mac_addr * @n_acl_entries: Number of MAC address entries passed * @mac_addrs: List of MAC addresses of stations to be used for ACL */ @@ -666,6 +666,8 @@ struct station_parameters { * @STATION_INFO_INACTIVE_TIME: @inactive_time filled * @STATION_INFO_RX_BYTES: @rx_bytes filled * @STATION_INFO_TX_BYTES: @tx_bytes filled + * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value + * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value * @STATION_INFO_LLID: @llid filled * @STATION_INFO_PLID: @plid filled * @STATION_INFO_PLINK_STATE: @plink_state filled @@ -674,8 +676,6 @@ struct station_parameters { * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value - * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value - * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -1226,6 +1226,7 @@ struct cfg80211_match_set { * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface + * @scan_start: start time of the scheduled scan * @channels: channels to scan * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ @@ -1404,6 +1405,8 @@ struct cfg80211_assoc_request { * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication + * @local_state_change: if set, change local state only and + * do not set a deauth frame */ struct cfg80211_deauth_request { const u8 *bssid; @@ -2629,7 +2632,6 @@ struct cfg80211_cached_keys; * the user-set AP, monitor and WDS channel * @preset_chan: (private) Used by the internal configuration code to * track the channel to be used for AP later - * @preset_chantype: (private) the corresponding channel type * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 5a1deba..350578c 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -298,6 +298,7 @@ struct sta_ampdu_mlme { * @beacon_loss_count: number of times beacon loss has triggered * @supports_40mhz: tracks whether the station advertised 40 MHz support * as we overwrite its HT parameters with the currently used value + * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { /* General information, mostly static */ -- cgit v0.10.2 From 45b5028e86292284f4d5794047d5dfd742c22421 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 6 Feb 2013 10:17:21 -0800 Subject: mac80211: fix mesh sta teardown The patch "mac80211: clean up mesh sta allocation warning" moved some mesh initialization into a path which is only called when the kernel handles peering. This causes a hang when mac80211 tries to clean up a userspace-allocated station entry and delete a timer which has never been initialized. To avoid this, only do any mesh sta peering teardown if the kernel is actually handling it. The same is true when quiescing before suspend. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 35ac388..0c51b78 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -149,6 +149,31 @@ u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) return changed; } +/* + * mesh_sta_cleanup - clean up any mesh sta state + * + * @sta: mesh sta to clean up. + */ +void mesh_sta_cleanup(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; + + /* + * maybe userspace handles peer allocation and peering, but in either + * case the beacon is still generated by the kernel and we might need + * an update. + */ + changed = mesh_accept_plinks_update(sdata); + if (sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) { + changed |= mesh_plink_deactivate(sta); + del_timer_sync(&sta->plink_timer); + } + + if (changed) + ieee80211_bss_info_change_notify(sdata, changed); +} + int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) { int i; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index eb33625..3b9d862 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -288,12 +288,13 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); -void mesh_plink_deactivate(struct sta_info *sta); +u32 mesh_plink_deactivate(struct sta_info *sta); int mesh_plink_open(struct sta_info *sta); void mesh_plink_block(struct sta_info *sta); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); +void mesh_sta_cleanup(struct sta_info *sta); /* Private interfaces */ /* Mesh tables */ diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 67524e7..56c9b31 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -214,7 +214,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) * * All mesh paths with this peer as next hop will be flushed */ -void mesh_plink_deactivate(struct sta_info *sta) +u32 mesh_plink_deactivate(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; @@ -227,7 +227,7 @@ void mesh_plink_deactivate(struct sta_info *sta) sta->reason); spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, @@ -595,6 +595,10 @@ void mesh_plink_quiesce(struct sta_info *sta) if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) return; + /* no kernel mesh sta timers have been initialized */ + if (sta->sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 47a0f06..19db20a 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -137,13 +137,8 @@ static void cleanup_single_sta(struct sta_info *sta) ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); } -#ifdef CONFIG_MAC80211_MESH - if (ieee80211_vif_is_mesh(&sdata->vif)) { - mesh_accept_plinks_update(sdata); - mesh_plink_deactivate(sta); - del_timer_sync(&sta->plink_timer); - } -#endif + if (ieee80211_vif_is_mesh(&sdata->vif)) + mesh_sta_cleanup(sta); cancel_work_sync(&sta->drv_unblock_wk); -- cgit v0.10.2 From 601513aa208f27ea87400a410d42c978421530ec Mon Sep 17 00:00:00 2001 From: Emanuel Taube Date: Wed, 6 Feb 2013 14:17:17 +0100 Subject: mac80211: Add the DS Params for mesh to every band There seems to be no reason, why it has to be limited to 2.4 GHz. Signed-off-by: Emanuel Taube [remove 'local' variable] Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0c51b78..2bf0158 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -393,8 +393,6 @@ mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) int mesh_add_ds_params_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { - struct ieee80211_local *local = sdata->local; - struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u8 *pos; @@ -411,13 +409,10 @@ int mesh_add_ds_params_ie(struct sk_buff *skb, chan = chanctx_conf->def.chan; rcu_read_unlock(); - sband = local->hw.wiphy->bands[chan->band]; - if (sband->band == IEEE80211_BAND_2GHZ) { - pos = skb_put(skb, 2 + 1); - *pos++ = WLAN_EID_DS_PARAMS; - *pos++ = 1; - *pos++ = ieee80211_frequency_to_channel(chan->center_freq); - } + pos = skb_put(skb, 2 + 1); + *pos++ = WLAN_EID_DS_PARAMS; + *pos++ = 1; + *pos++ = ieee80211_frequency_to_channel(chan->center_freq); return 0; } -- cgit v0.10.2 From f9e124fbd8cbea974b5dc7e9dafddd17d21df7e2 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 4 Feb 2013 17:44:44 +0000 Subject: mac80211: protect rx-path with spinlock This patch fixes the problem which was discussed in "mac80211: Fix PN corruption in case of multiple virtual interface" [1]. Amit Shakya reported a serious issue with my patch: mac80211: serialize rx path workers" [2]: In case, ieee80211_rx_handlers processing is going on for skbs received on one vif and at the same time, rx aggregation reorder timer expires on another vif then sta_rx_agg_reorder_timer_expired is invoked and it will push skbs into the single queue (local->rx_skb_queue). ieee80211_rx_handlers in the while loop assumes that the skbs are for the same sdata and sta. This assumption doesn't hold good in this scenario and the PN gets corrupted by PN received in other vif's skb, causing traffic to stop due to PN mismatch." [1] Message-Id: http://mid.gmane.org/201302041844.44436.chunkeey@googlemail.com [2] Commit-Id: 24a8fdad35835e8d71f7 Reported-by: Amit Shakya Signed-off-by: Christian Lamparter Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5fe9db7..080cf09 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -958,14 +958,7 @@ struct ieee80211_local { struct sk_buff_head skb_queue; struct sk_buff_head skb_queue_unreliable; - /* - * Internal FIFO queue which is shared between multiple rx path - * stages. Its main task is to provide a serialization mechanism, - * so all rx handlers can enjoy having exclusive access to their - * private data structures. - */ - struct sk_buff_head rx_skb_queue; - bool running_rx_handler; /* protected by rx_skb_queue.lock */ + spinlock_t rx_path_lock; /* Station data */ /* diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 2bdd454..2220331 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -34,8 +34,6 @@ #include "cfg.h" #include "debugfs.h" -static struct lock_class_key ieee80211_rx_skb_queue_class; - void ieee80211_configure_filter(struct ieee80211_local *local) { u64 mc; @@ -613,21 +611,12 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, mutex_init(&local->key_mtx); spin_lock_init(&local->filter_lock); + spin_lock_init(&local->rx_path_lock); spin_lock_init(&local->queue_stop_reason_lock); INIT_LIST_HEAD(&local->chanctx_list); mutex_init(&local->chanctx_mtx); - /* - * The rx_skb_queue is only accessed from tasklets, - * but other SKB queues are used from within IRQ - * context. Therefore, this one needs a different - * locking class so our direct, non-irq-safe use of - * the queue's lock doesn't throw lockdep warnings. - */ - skb_queue_head_init_class(&local->rx_skb_queue, - &ieee80211_rx_skb_queue_class); - INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); INIT_WORK(&local->restart_work, ieee80211_restart_work); @@ -1089,7 +1078,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); skb_queue_purge(&local->skb_queue); skb_queue_purge(&local->skb_queue_unreliable); - skb_queue_purge(&local->rx_skb_queue); destroy_workqueue(local->workqueue); wiphy_unregister(local->hw.wiphy); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c98be05..b5f1bba 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -668,9 +668,9 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - int index) + int index, + struct sk_buff_head *frames) { - struct ieee80211_local *local = sdata->local; struct sk_buff *skb = tid_agg_rx->reorder_buf[index]; struct ieee80211_rx_status *status; @@ -684,7 +684,7 @@ static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, tid_agg_rx->reorder_buf[index] = NULL; status = IEEE80211_SKB_RXCB(skb); status->rx_flags |= IEEE80211_RX_DEFERRED_RELEASE; - skb_queue_tail(&local->rx_skb_queue, skb); + __skb_queue_tail(frames, skb); no_frame: tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); @@ -692,7 +692,8 @@ no_frame: static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - u16 head_seq_num) + u16 head_seq_num, + struct sk_buff_head *frames) { int index; @@ -701,7 +702,8 @@ static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) { index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; - ieee80211_release_reorder_frame(sdata, tid_agg_rx, index); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, + frames); } } @@ -717,7 +719,8 @@ static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10) static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, - struct tid_ampdu_rx *tid_agg_rx) + struct tid_ampdu_rx *tid_agg_rx, + struct sk_buff_head *frames) { int index, j; @@ -746,7 +749,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, ht_dbg_ratelimited(sdata, "release an RX reorder frame due to timeout on earlier frames\n"); - ieee80211_release_reorder_frame(sdata, tid_agg_rx, j); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, j, + frames); /* * Increment the head seq# also for the skipped slots. @@ -756,7 +760,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, skipped = 0; } } else while (tid_agg_rx->reorder_buf[index]) { - ieee80211_release_reorder_frame(sdata, tid_agg_rx, index); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, + frames); index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; } @@ -788,7 +793,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, */ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - struct sk_buff *skb) + struct sk_buff *skb, + struct sk_buff_head *frames) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; u16 sc = le16_to_cpu(hdr->seq_ctrl); @@ -816,7 +822,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size)); /* release stored frames up to new head to stack */ ieee80211_release_reorder_frames(sdata, tid_agg_rx, - head_seq_num); + head_seq_num, frames); } /* Now the new frame is always in the range of the reordering buffer */ @@ -846,7 +852,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata tid_agg_rx->reorder_buf[index] = skb; tid_agg_rx->reorder_time[index] = jiffies; tid_agg_rx->stored_mpdu_num++; - ieee80211_sta_reorder_release(sdata, tid_agg_rx); + ieee80211_sta_reorder_release(sdata, tid_agg_rx, frames); out: spin_unlock(&tid_agg_rx->reorder_lock); @@ -857,7 +863,8 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns * true if the MPDU was buffered, false if it should be processed. */ -static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx) +static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { struct sk_buff *skb = rx->skb; struct ieee80211_local *local = rx->local; @@ -922,11 +929,12 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx) * sure that we cannot get to it any more before doing * anything with it. */ - if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb)) + if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb, + frames)) return; dont_reorder: - skb_queue_tail(&local->rx_skb_queue, skb); + __skb_queue_tail(frames, skb); } static ieee80211_rx_result debug_noinline @@ -2184,7 +2192,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) } static ieee80211_rx_result debug_noinline -ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) +ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames) { struct sk_buff *skb = rx->skb; struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data; @@ -2223,7 +2231,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) spin_lock(&tid_agg_rx->reorder_lock); /* release stored frames up to start of BAR */ ieee80211_release_reorder_frames(rx->sdata, tid_agg_rx, - start_seq_num); + start_seq_num, frames); spin_unlock(&tid_agg_rx->reorder_lock); kfree_skb(skb); @@ -2808,7 +2816,8 @@ static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx, } } -static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) +static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { ieee80211_rx_result res = RX_DROP_MONITOR; struct sk_buff *skb; @@ -2820,15 +2829,9 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) goto rxh_next; \ } while (0); - spin_lock(&rx->local->rx_skb_queue.lock); - if (rx->local->running_rx_handler) - goto unlock; - - rx->local->running_rx_handler = true; - - while ((skb = __skb_dequeue(&rx->local->rx_skb_queue))) { - spin_unlock(&rx->local->rx_skb_queue.lock); + spin_lock_bh(&rx->local->rx_path_lock); + while ((skb = __skb_dequeue(frames))) { /* * all the other fields are valid across frames * that belong to an aMPDU since they are on the @@ -2849,7 +2852,12 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) #endif CALL_RXH(ieee80211_rx_h_amsdu) CALL_RXH(ieee80211_rx_h_data) - CALL_RXH(ieee80211_rx_h_ctrl); + + /* special treatment -- needs the queue */ + res = ieee80211_rx_h_ctrl(rx, frames); + if (res != RX_CONTINUE) + goto rxh_next; + CALL_RXH(ieee80211_rx_h_mgmt_check) CALL_RXH(ieee80211_rx_h_action) CALL_RXH(ieee80211_rx_h_userspace_mgmt) @@ -2858,20 +2866,20 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) rxh_next: ieee80211_rx_handlers_result(rx, res); - spin_lock(&rx->local->rx_skb_queue.lock); + #undef CALL_RXH } - rx->local->running_rx_handler = false; - - unlock: - spin_unlock(&rx->local->rx_skb_queue.lock); + spin_unlock_bh(&rx->local->rx_path_lock); } static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) { + struct sk_buff_head reorder_release; ieee80211_rx_result res = RX_DROP_MONITOR; + __skb_queue_head_init(&reorder_release); + #define CALL_RXH(rxh) \ do { \ res = rxh(rx); \ @@ -2881,9 +2889,9 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) CALL_RXH(ieee80211_rx_h_check) - ieee80211_rx_reorder_ampdu(rx); + ieee80211_rx_reorder_ampdu(rx, &reorder_release); - ieee80211_rx_handlers(rx); + ieee80211_rx_handlers(rx, &reorder_release); return; rxh_next: @@ -2898,6 +2906,7 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) */ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) { + struct sk_buff_head frames; struct ieee80211_rx_data rx = { .sta = sta, .sdata = sta->sdata, @@ -2913,11 +2922,13 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) if (!tid_agg_rx) return; + __skb_queue_head_init(&frames); + spin_lock(&tid_agg_rx->reorder_lock); - ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx); + ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx, &frames); spin_unlock(&tid_agg_rx->reorder_lock); - ieee80211_rx_handlers(&rx); + ieee80211_rx_handlers(&rx, &frames); } /* main receive path */ -- cgit v0.10.2 From 112c31f095a7106fbb3ced0dae50aa9b36ac2662 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 22:59:00 +0100 Subject: mac80211: fix AP beacon loss messages The messages currently refer to probe request probes, but on some devices null data packets will be used instead. Make the messages more generic. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 15f2edd..40ce00c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1746,7 +1746,7 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, if (beacon) mlme_dbg_ratelimited(sdata, - "detected beacon loss from AP - sending probe request\n"); + "detected beacon loss from AP - probing\n"); ieee80211_cqm_rssi_notify(&sdata->vif, NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL); @@ -2641,7 +2641,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { mlme_dbg_ratelimited(sdata, - "cancelling probereq poll due to a received beacon\n"); + "cancelling AP probe due to a received beacon\n"); mutex_lock(&local->mtx); ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; ieee80211_run_deferred_scan(local); -- cgit v0.10.2 From 757af6fefd53628bcfe75f7fbd302c5d4c02eba5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 21:29:59 +0100 Subject: mac80211: fix chandef tracing bug The chandef tracing writes center_freq1 twice, so that it is always 0 (no driver supports 80+80 yet) and leaves center_freq2 unset. Fix this mistake. Signed-off-by: Johannes Berg diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 6ca53d6..a2ca72c 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -36,7 +36,7 @@ __entry->control_freq = (c)->chan->center_freq; \ __entry->chan_width = (c)->width; \ __entry->center_freq1 = (c)->center_freq1; \ - __entry->center_freq1 = (c)->center_freq2; + __entry->center_freq2 = (c)->center_freq2; #define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz" #define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ __entry->center_freq1, __entry->center_freq2 -- cgit v0.10.2 From 1f4ac5a63f897a480fffd0d5c843b03f02c384a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 12:07:44 +0100 Subject: mac80211: explicitly copy channels to VLANs where needed Currently the code assigns channel contexts to VLANs (for use by the TX/RX code) when the AP master gets its channel context assigned. This works fine, but in the upcoming radar detection work the VLANs don't require a channel context (during radar detection) and assigning one to them anyway causes issues with locking and also inconsistencies -- a VLAN interface that is added before radar detection would get the channel context, while one added during it wouldn't. Fix these issues moving the channel context copying to a new explicit operation that will not be used in the radar detection code. Acked-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f4f7e76..8f6b593 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -933,6 +933,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, IEEE80211_CHANCTX_SHARED); if (err) return err; + ieee80211_vif_copy_chanctx_to_vlans(sdata, false); /* * Apply control port protocol, this allows us to @@ -1047,6 +1048,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); skb_queue_purge(&sdata->u.ap.ps.bc_buf); + ieee80211_vif_copy_chanctx_to_vlans(sdata, true); ieee80211_vif_release_channel(sdata); return 0; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 1bfe0a8..b5b5076 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -198,15 +198,6 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ctx = container_of(conf, struct ieee80211_chanctx, conf); - if (sdata->vif.type == NL80211_IFTYPE_AP) { - struct ieee80211_sub_if_data *vlan; - - /* for the VLAN list */ - ASSERT_RTNL(); - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - rcu_assign_pointer(vlan->vif.chanctx_conf, NULL); - } - ieee80211_unassign_vif_chanctx(sdata, ctx); if (ctx->refcount == 0) ieee80211_free_chanctx(local, ctx); @@ -326,15 +317,6 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, goto out; } - if (sdata->vif.type == NL80211_IFTYPE_AP) { - struct ieee80211_sub_if_data *vlan; - - /* for the VLAN list */ - ASSERT_RTNL(); - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - rcu_assign_pointer(vlan->vif.chanctx_conf, &ctx->conf); - } - ieee80211_recalc_smps_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); @@ -369,6 +351,40 @@ void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata) mutex_unlock(&local->chanctx_mtx); } +void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, + bool clear) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *vlan; + struct ieee80211_chanctx_conf *conf; + + ASSERT_RTNL(); + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP)) + return; + + mutex_lock(&local->chanctx_mtx); + + /* + * Check that conf exists, even when clearing this function + * must be called with the AP's channel context still there + * as it would otherwise cause VLANs to have an invalid + * channel context pointer for a while, possibly pointing + * to a channel context that has already been freed. + */ + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + WARN_ON(!conf); + + if (clear) + conf = NULL; + + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + rcu_assign_pointer(vlan->vif.chanctx_conf, conf); + + mutex_unlock(&local->chanctx_mtx); +} + void ieee80211_iter_chan_contexts_atomic( struct ieee80211_hw *hw, void (*iter)(struct ieee80211_hw *hw, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 080cf09..8e884fc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1605,6 +1605,8 @@ ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, enum ieee80211_chanctx_mode mode); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); +void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, + bool clear); void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); -- cgit v0.10.2 From 776b3580178f2065838fa0db0eb7a41b57495c0a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 02:06:18 +0100 Subject: cfg80211: track hidden SSID networks properly Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5d8554b..04a702d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1292,7 +1292,14 @@ struct cfg80211_bss_ies { * either the beacon_ies or proberesp_ies depending on whether Probe * Response frame has been received * @beacon_ies: the information elements from the last Beacon frame + * (implementation note: if @hidden_beacon_bss is set this struct doesn't + * own the beacon_ies, but they're just pointers to the ones from the + * @hidden_beacon_bss struct) * @proberesp_ies: the information elements from the last Probe Response frame + * @hidden_beacon_bss: in case this BSS struct represents a probe response from + * a BSS that hides the SSID in its beacon, this points to the BSS struct + * that holds the beacon data. @beacon_ies is still valid, of course, and + * points to the same data as hidden_beacon_bss->beacon_ies in that case. * @signal: signal strength value (type depends on the wiphy's signal_type) * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -1305,6 +1312,8 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; + struct cfg80211_bss *hidden_beacon_bss; + s32 signal; u16 beacon_interval; diff --git a/net/wireless/core.h b/net/wireless/core.h index 8396f76..37d70dc 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -124,9 +123,10 @@ static inline void assert_cfg80211_lock(void) struct cfg80211_internal_bss { struct list_head list; + struct list_head hidden_list; struct rb_node rbn; unsigned long ts; - struct kref ref; + unsigned long refcount; atomic_t hold; /* must be last because of priv member */ diff --git a/net/wireless/scan.c b/net/wireless/scan.c index dacb44a..5e0983d 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -19,46 +19,124 @@ #include "wext-compat.h" #include "rdev-ops.h" +/** + * DOC: BSS tree/list structure + * + * At the top level, the BSS list is kept in both a list in each + * registered device (@bss_list) as well as an RB-tree for faster + * lookup. In the RB-tree, entries can be looked up using their + * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID + * for other BSSes. + * + * Due to the possibility of hidden SSIDs, there's a second level + * structure, the "hidden_list" and "hidden_beacon_bss" pointer. + * The hidden_list connects all BSSes belonging to a single AP + * that has a hidden SSID, and connects beacon and probe response + * entries. For a probe response entry for a hidden SSID, the + * hidden_beacon_bss pointer points to the BSS struct holding the + * beacon's information. + * + * Reference counting is done for all these references except for + * the hidden_list, so that a beacon BSS struct that is otherwise + * not referenced has one reference for being on the bss_list and + * one for each probe response entry that points to it using the + * hidden_beacon_bss pointer. When a BSS struct that has such a + * pointer is get/put, the refcount update is also propagated to + * the referenced struct, this ensure that it cannot get removed + * while somebody is using the probe response version. + * + * Note that the hidden_beacon_bss pointer never changes, due to + * the reference counting. Therefore, no locking is needed for + * it. + * + * Also note that the hidden_beacon_bss pointer is only relevant + * if the driver uses something other than the IEs, e.g. private + * data stored stored in the BSS struct, since the beacon IEs are + * also linked into the probe response struct. + */ + #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) -static void bss_release(struct kref *ref) +static void bss_free(struct cfg80211_internal_bss *bss) { struct cfg80211_bss_ies *ies; - struct cfg80211_internal_bss *bss; - - bss = container_of(ref, struct cfg80211_internal_bss, ref); if (WARN_ON(atomic_read(&bss->hold))) return; ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); - if (ies) + if (ies && !bss->pub.hidden_beacon_bss) kfree_rcu(ies, rcu_head); ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); if (ies) kfree_rcu(ies, rcu_head); + /* + * This happens when the module is removed, it doesn't + * really matter any more save for completeness + */ + if (!list_empty(&bss->hidden_list)) + list_del(&bss->hidden_list); + kfree(bss); } -static inline void bss_ref_get(struct cfg80211_internal_bss *bss) +static inline void bss_ref_get(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) { - kref_get(&bss->ref); + lockdep_assert_held(&dev->bss_lock); + + bss->refcount++; + if (bss->pub.hidden_beacon_bss) { + bss = container_of(bss->pub.hidden_beacon_bss, + struct cfg80211_internal_bss, + pub); + bss->refcount++; + } } -static inline void bss_ref_put(struct cfg80211_internal_bss *bss) +static inline void bss_ref_put(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) { - kref_put(&bss->ref, bss_release); + lockdep_assert_held(&dev->bss_lock); + + if (bss->pub.hidden_beacon_bss) { + struct cfg80211_internal_bss *hbss; + hbss = container_of(bss->pub.hidden_beacon_bss, + struct cfg80211_internal_bss, + pub); + hbss->refcount--; + if (hbss->refcount == 0) + bss_free(hbss); + } + bss->refcount--; + if (bss->refcount == 0) + bss_free(bss); } -static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, +static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { lockdep_assert_held(&dev->bss_lock); + if (!list_empty(&bss->hidden_list)) { + /* + * don't remove the beacon entry if it has + * probe responses associated with it + */ + if (!bss->pub.hidden_beacon_bss) + return false; + /* + * if it's a probe response entry break its + * link to the other entries in the group + */ + list_del_init(&bss->hidden_list); + } + list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); - bss_ref_put(bss); + bss_ref_put(dev, bss); + return true; } static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, @@ -75,8 +153,8 @@ static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, if (!time_after(expire_time, bss->ts)) continue; - __cfg80211_unlink_bss(dev, bss); - expired = true; + if (__cfg80211_unlink_bss(dev, bss)) + expired = true; } if (expired) @@ -466,7 +544,7 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, continue; if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { res = bss; - bss_ref_get(res); + bss_ref_get(dev, res); break; } } @@ -532,23 +610,67 @@ rb_find_bss(struct cfg80211_registered_device *dev, return NULL; } -static void -copy_hidden_ies(struct cfg80211_internal_bss *res, - struct cfg80211_internal_bss *hidden) +static bool cfg80211_combine_bsses(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *new) { const struct cfg80211_bss_ies *ies; + struct cfg80211_internal_bss *bss; + const u8 *ie; + int i, ssidlen; + u8 fold = 0; - if (rcu_access_pointer(res->pub.beacon_ies)) - return; - - ies = rcu_access_pointer(hidden->pub.beacon_ies); + ies = rcu_access_pointer(new->pub.beacon_ies); if (WARN_ON(!ies)) - return; + return false; - ies = kmemdup(ies, sizeof(*ies) + ies->len, GFP_ATOMIC); - if (unlikely(!ies)) - return; - rcu_assign_pointer(res->pub.beacon_ies, ies); + ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); + if (!ie) { + /* nothing to do */ + return true; + } + + ssidlen = ie[1]; + for (i = 0; i < ssidlen; i++) + fold |= ie[2 + i]; + + if (fold) { + /* not a hidden SSID */ + return true; + } + + /* This is the bad part ... */ + + list_for_each_entry(bss, &dev->bss_list, list) { + if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) + continue; + if (bss->pub.channel != new->pub.channel) + continue; + if (rcu_access_pointer(bss->pub.beacon_ies)) + continue; + ies = rcu_access_pointer(bss->pub.ies); + if (!ies) + continue; + ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); + if (!ie) + continue; + if (ssidlen && ie[1] != ssidlen) + continue; + /* that would be odd ... */ + if (bss->pub.beacon_ies) + continue; + if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) + continue; + if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) + list_del(&bss->hidden_list); + /* combine them */ + list_add(&bss->hidden_list, &new->hidden_list); + bss->pub.hidden_beacon_bss = &new->pub; + new->refcount += bss->refcount; + rcu_assign_pointer(bss->pub.beacon_ies, + new->pub.beacon_ies); + } + + return true; } static struct cfg80211_internal_bss * @@ -594,6 +716,21 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, rcu_head); } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { const struct cfg80211_bss_ies *old; + struct cfg80211_internal_bss *bss; + + if (found->pub.hidden_beacon_bss && + !list_empty(&found->hidden_list)) { + /* + * The found BSS struct is one of the probe + * response members of a group, but we're + * receiving a beacon (beacon_ies in the tmp + * bss is used). This can only mean that the + * AP changed its beacon from not having an + * SSID to showing it, which is confusing so + * drop this information. + */ + goto drop; + } old = rcu_access_pointer(found->pub.beacon_ies); @@ -605,6 +742,18 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, rcu_assign_pointer(found->pub.ies, tmp->pub.beacon_ies); + /* Assign beacon IEs to all sub entries */ + list_for_each_entry(bss, &found->hidden_list, + hidden_list) { + const struct cfg80211_bss_ies *ies; + + ies = rcu_access_pointer(bss->pub.beacon_ies); + WARN_ON(ies != old); + + rcu_assign_pointer(bss->pub.beacon_ies, + tmp->pub.beacon_ies); + } + if (old) kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); @@ -614,24 +763,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *hidden; struct cfg80211_bss_ies *ies; - /* First check if the beacon is a probe response from - * a hidden bss. If so, copy beacon ies (with nullified - * ssid) into the probe response bss entry (with real ssid). - * It is required basically for PSM implementation - * (probe responses do not contain tim ie) */ - - /* TODO: The code is not trying to update existing probe - * response bss entries when beacon ies are - * getting changed. */ - hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); - if (hidden) { - copy_hidden_ies(tmp, hidden); - } else { - hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_NUL); - if (hidden) - copy_hidden_ies(tmp, hidden); - } - /* * create a copy -- the "res" variable that is passed in * is allocated on the stack since it's not needed in the @@ -646,21 +777,51 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); if (ies) kfree_rcu(ies, rcu_head); - spin_unlock_bh(&dev->bss_lock); - return NULL; + goto drop; } memcpy(new, tmp, sizeof(*new)); - kref_init(&new->ref); + new->refcount = 1; + INIT_LIST_HEAD(&new->hidden_list); + + if (rcu_access_pointer(tmp->pub.proberesp_ies)) { + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); + if (!hidden) + hidden = rb_find_bss(dev, tmp, + BSS_CMP_HIDE_NUL); + if (hidden) { + new->pub.hidden_beacon_bss = &hidden->pub; + list_add(&new->hidden_list, + &hidden->hidden_list); + hidden->refcount++; + rcu_assign_pointer(new->pub.beacon_ies, + hidden->pub.beacon_ies); + } + } else { + /* + * Ok so we found a beacon, and don't have an entry. If + * it's a beacon with hidden SSID, we might be in for an + * expensive search for any probe responses that should + * be grouped with this beacon for updates ... + */ + if (!cfg80211_combine_bsses(dev, new)) { + kfree(new); + goto drop; + } + } + list_add_tail(&new->list, &dev->bss_list); rb_insert_bss(dev, new); found = new; } dev->bss_generation++; + bss_ref_get(dev, found); spin_unlock_bh(&dev->bss_lock); - bss_ref_get(found); return found; + drop: + spin_unlock_bh(&dev->bss_lock); + return NULL; } static struct ieee80211_channel * @@ -820,25 +981,33 @@ EXPORT_SYMBOL(cfg80211_inform_bss_frame); void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { + struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); struct cfg80211_internal_bss *bss; if (!pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - bss_ref_get(bss); + + spin_lock_bh(&dev->bss_lock); + bss_ref_get(dev, bss); + spin_unlock_bh(&dev->bss_lock); } EXPORT_SYMBOL(cfg80211_ref_bss); void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { + struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); struct cfg80211_internal_bss *bss; if (!pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - bss_ref_put(bss); + + spin_lock_bh(&dev->bss_lock); + bss_ref_put(dev, bss); + spin_unlock_bh(&dev->bss_lock); } EXPORT_SYMBOL(cfg80211_put_bss); @@ -854,8 +1023,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) spin_lock_bh(&dev->bss_lock); if (!list_empty(&bss->list)) { - __cfg80211_unlink_bss(dev, bss); - dev->bss_generation++; + if (__cfg80211_unlink_bss(dev, bss)) + dev->bss_generation++; } spin_unlock_bh(&dev->bss_lock); } -- cgit v0.10.2 From b207cdb07f3f01ec1adaac62e9d0cc918c60a81a Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sat, 22 Dec 2012 10:43:33 +0200 Subject: mac80211: add vif debugfs driver callbacks Add debugfs driver callbacks so drivers can add debugfs entries for interfaces. Note that they _must_ remove the entries again as add/remove in the driver doesn't correspond to add/remove in debugfs; the former is up/down while the latter is netdev create/destroy. Signed-off-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7da1121..46e08ba 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2167,6 +2167,18 @@ enum ieee80211_rate_control_changed { * MAC address of the device going away. * Hence, this callback must be implemented. It can sleep. * + * @add_interface_debugfs: Drivers can use this callback to add debugfs files + * when a vif is added to mac80211. This callback and + * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS + * conditional. @remove_interface_debugfs must be provided for cleanup. + * This callback can sleep. + * + * @remove_interface_debugfs: Remove the debugfs files which were added using + * @add_interface_debugfs. This callback must remove all debugfs entries + * that were added because mac80211 only removes interface debugfs when the + * interface is destroyed, not when it is removed from the driver. + * This callback can sleep. + * * @config: Handler for configuration requests. IEEE 802.11 code calls this * function to change hardware configuration, e.g., channel. * This function should never fail but returns a negative error code @@ -2580,6 +2592,12 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); + void (*add_interface_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct dentry *dir); + void (*remove_interface_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct dentry *dir); #endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 434b3c4..2b08b99 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -528,6 +528,43 @@ static inline void drv_sta_remove_debugfs(struct ieee80211_local *local, local->ops->sta_remove_debugfs(&local->hw, &sdata->vif, sta, dir); } + +static inline +void drv_add_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + + check_sdata_in_driver(sdata); + + if (!local->ops->add_interface_debugfs) + return; + + local->ops->add_interface_debugfs(&local->hw, &sdata->vif, + sdata->debugfs.dir); +} + +static inline +void drv_remove_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + + check_sdata_in_driver(sdata); + + if (!local->ops->remove_interface_debugfs) + return; + + local->ops->remove_interface_debugfs(&local->hw, &sdata->vif, + sdata->debugfs.dir); +} +#else +static inline +void drv_add_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) {} +static inline +void drv_remove_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) {} #endif static inline __must_check diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 0a36dc6..deb78e8 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -621,6 +621,8 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) goto err_del_interface; } + drv_add_interface_debugfs(local, sdata); + if (sdata->vif.type == NL80211_IFTYPE_AP) { local->fif_pspoll++; local->fif_probe_req++; @@ -882,6 +884,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, */ ieee80211_free_keys(sdata); + drv_remove_interface_debugfs(local, sdata); + if (going_down) drv_remove_interface(local, sdata); } -- cgit v0.10.2 From 83c7aa1a1475ae1c42640ab6e4559016142efc67 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:51:29 +0100 Subject: cfg80211: remove scan ies NULL check There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index ee85b41..8866a2b6 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -162,11 +162,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, rcu_read_lock(); ies = rcu_dereference(bss->ies); - if (WARN_ON(!ies)) { - /* should never happen */ - rcu_read_unlock(); - return -EINVAL; - } beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC); beacon_ie_len = ies->len; rcu_read_unlock(); diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 04a702d..fb76631 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1287,10 +1287,10 @@ struct cfg80211_bss_ies { * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order - * @ies: the information elements (Note that there - * is no guarantee that these are well-formed!); this is a pointer to - * either the beacon_ies or proberesp_ies depending on whether Probe - * Response frame has been received + * @ies: the information elements (Note that there is no guarantee that these + * are well-formed!); this is a pointer to either the beacon_ies or + * proberesp_ies depending on whether Probe Response frame has been + * received. It is always non-%NULL. * @beacon_ies: the information elements from the last Beacon frame * (implementation note: if @hidden_beacon_bss is set this struct doesn't * own the beacon_ies, but they're just pointers to the ones from the diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 5e0983d..02a2383 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1293,15 +1293,10 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, rcu_read_lock(); ies = rcu_dereference(bss->pub.ies); - if (ies) { - rem = ies->len; - ie = ies->data; - } else { - rem = 0; - ie = NULL; - } + rem = ies->len; + ie = ies->data; - while (ies && rem >= 2) { + while (rem >= 2) { /* invalid data */ if (ie[1] > rem - 2) break; -- cgit v0.10.2 From 8cef2c9df88fdd13f518e6607de9d664b31f26cc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:54:31 +0100 Subject: cfg80211: move TSF into IEs While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 8866a2b6..0d01846 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -164,6 +164,7 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, ies = rcu_dereference(bss->ies); beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC); beacon_ie_len = ies->len; + bss_desc->timestamp = ies->tsf; rcu_read_unlock(); if (!beacon_ie) { @@ -179,7 +180,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, bss_desc->cap_info_bitmap = bss->capability; bss_desc->bss_band = bss_priv->band; bss_desc->fw_tsf = bss_priv->fw_tsf; - bss_desc->timestamp = bss->tsf; if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) { dev_dbg(priv->adapter->dev, "info: InterpretIE: AP WEP enabled\n"); bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fb76631..77686ca 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1266,11 +1266,13 @@ enum cfg80211_signal_type { /** * struct cfg80211_bss_ie_data - BSS entry IE data + * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing * @len: length of the IEs * @data: IE data */ struct cfg80211_bss_ies { + u64 tsf; struct rcu_head rcu_head; int len; u8 data[]; @@ -1284,7 +1286,6 @@ struct cfg80211_bss_ies { * * @channel: channel this BSS is on * @bssid: BSSID of the BSS - * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order * @ies: the information elements (Note that there is no guarantee that these @@ -1304,8 +1305,6 @@ struct cfg80211_bss_ies { * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { - u64 tsf; - struct ieee80211_channel *channel; const struct cfg80211_bss_ies __rcu *ies; diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 71c55cc..055fa94 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -242,6 +242,8 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, u32 basic_rates; int i, j; u16 beacon_int = cbss->beacon_interval; + const struct cfg80211_bss_ies *ies; + u64 tsf; lockdep_assert_held(&sdata->u.ibss.mtx); @@ -265,13 +267,17 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, } } + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + tsf = ies->tsf; + rcu_read_unlock(); + __ieee80211_sta_join_ibss(sdata, cbss->bssid, beacon_int, cbss->channel, basic_rates, cbss->capability, - cbss->tsf, - false); + tsf, false); } static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta, @@ -535,8 +541,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, cbss = container_of((void *)bss, struct cfg80211_bss, priv); - /* was just updated in ieee80211_bss_info_update */ - beacon_timestamp = cbss->tsf; + /* same for beacon and probe response */ + beacon_timestamp = le64_to_cpu(mgmt->u.beacon.timestamp); /* check if we need to merge IBSS */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 40ce00c..51eca5a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3667,6 +3667,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; struct ieee80211_supported_band *sband; + const struct cfg80211_bss_ies *ies; sband = local->hw.wiphy->bands[cbss->channel->band]; @@ -3710,7 +3711,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; - sdata->vif.bss_conf.sync_tsf = cbss->tsf; + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + sdata->vif.bss_conf.sync_tsf = ies->tsf; + rcu_read_unlock(); sdata->vif.bss_conf.sync_device_ts = bss->device_ts; /* tell driver about BSSID, basic rates and timing */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 807d448..93bc63e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4997,6 +4997,7 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, const struct cfg80211_bss_ies *ies; void *hdr; struct nlattr *bss; + bool tsf = false; ASSERT_WDEV_LOCK(wdev); @@ -5020,22 +5021,24 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, rcu_read_lock(); ies = rcu_dereference(res->ies); - if (ies && ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS, - ies->len, ies->data)) { - rcu_read_unlock(); - goto nla_put_failure; + if (ies) { + if (nla_put_u64(msg, NL80211_BSS_TSF, ies->tsf)) + goto fail_unlock_rcu; + tsf = true; + if (ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS, + ies->len, ies->data)) + goto fail_unlock_rcu; } ies = rcu_dereference(res->beacon_ies); - if (ies && ies->len && nla_put(msg, NL80211_BSS_BEACON_IES, - ies->len, ies->data)) { - rcu_read_unlock(); - goto nla_put_failure; + if (ies) { + if (!tsf && nla_put_u64(msg, NL80211_BSS_TSF, ies->tsf)) + goto fail_unlock_rcu; + if (ies->len && nla_put(msg, NL80211_BSS_BEACON_IES, + ies->len, ies->data)) + goto fail_unlock_rcu; } rcu_read_unlock(); - if (res->tsf && - nla_put_u64(msg, NL80211_BSS_TSF, res->tsf)) - goto nla_put_failure; if (res->beacon_interval && nla_put_u16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval)) goto nla_put_failure; @@ -5080,6 +5083,8 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, return genlmsg_end(msg, hdr); + fail_unlock_rcu: + rcu_read_unlock(); nla_put_failure: genlmsg_cancel(msg, hdr); return -EMSGSIZE; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 02a2383..b7a1679 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -695,7 +695,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; - found->pub.tsf = tmp->pub.tsf; found->pub.signal = tmp->pub.signal; found->pub.capability = tmp->pub.capability; found->ts = tmp->ts; @@ -880,7 +879,6 @@ cfg80211_inform_bss(struct wiphy *wiphy, memcpy(tmp.pub.bssid, bssid, ETH_ALEN); tmp.pub.channel = channel; tmp.pub.signal = signal; - tmp.pub.tsf = tsf; tmp.pub.beacon_interval = beacon_interval; tmp.pub.capability = capability; /* @@ -895,6 +893,7 @@ cfg80211_inform_bss(struct wiphy *wiphy, if (!ies) return NULL; ies->len = ielen; + ies->tsf = tsf; memcpy(ies->data, ie, ielen); rcu_assign_pointer(tmp.pub.beacon_ies, ies); @@ -951,6 +950,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, if (!ies) return NULL; ies->len = ielen; + ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); memcpy(ies->data, mgmt->u.probe_resp.variable, ielen); if (ieee80211_is_probe_resp(mgmt->frame_control)) @@ -962,7 +962,6 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN); tmp.pub.channel = channel; tmp.pub.signal = signal; - tmp.pub.tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); @@ -1409,7 +1408,7 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, if (buf) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; - sprintf(buf, "tsf=%016llx", (unsigned long long)(bss->pub.tsf)); + sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); iwe.u.data.length = strlen(buf); current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, buf); -- cgit v0.10.2 From ef429dadf33feeb150098dbe84ccaa877e3261f6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 17:48:40 +0100 Subject: mac80211: introduce beacon-only timing data In order to be able to predict the next DTIM TBTT in the driver, add the ability to use timing data from beacons only with the new hardware flag IEEE80211_HW_TIMING_BEACON_ONLY and the BSS info value sync_dtim_count which is only valid if the timing data came from a beacon. The data can only come from a beacon, and if no beacon was received before association it is updated later together with the DTIM count notification. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 46e08ba..b9e0246 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -277,9 +277,16 @@ enum ieee80211_rssi_event { * valid in station mode only if after the driver was notified * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then. * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old - * as it may have been received during scanning long ago) + * as it may have been received during scanning long ago). If the + * HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can + * only come from a beacon, but might not become valid until after + * association when a beacon is received (which is notified with the + * %BSS_CHANGED_DTIM flag.) * @sync_device_ts: the device timestamp corresponding to the sync_tsf, * the driver/device can use this to calculate synchronisation + * (see @sync_tsf) + * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY + * is requested, see @sync_tsf/@sync_device_ts. * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -331,6 +338,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 sync_tsf; u32 sync_device_ts; + u8 sync_dtim_count; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -1371,6 +1379,9 @@ struct ieee80211_tx_control { * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. + * + * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames + * only, to allow getting TBTT of a DTIM beacon. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1399,6 +1410,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, + IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; /** diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8e884fc..d794856 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -86,7 +86,7 @@ struct ieee80211_fragment_entry { struct ieee80211_bss { - u32 device_ts; + u32 device_ts_beacon, device_ts_presp; bool wmm_used; bool uapsd_supported; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 51eca5a..a29d09c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2567,6 +2567,17 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; ifmgd->assoc_data->need_beacon = false; + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + sdata->vif.bss_conf.sync_device_ts = + rx_status->device_timestamp; + if (elems.tim) + sdata->vif.bss_conf.sync_dtim_count = + elems.tim->dtim_count; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -2725,7 +2736,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, /* * If we haven't had a beacon before, tell the driver about the - * DTIM period now. + * DTIM period (and beacon timing if desired) now. */ if (!bss_conf->dtim_period) { /* a few bogus AP send dtim_period = 0 or no TIM IE */ @@ -2733,6 +2744,19 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, bss_conf->dtim_period = elems.tim->dtim_period ?: 1; else bss_conf->dtim_period = 1; + + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + sdata->vif.bss_conf.sync_device_ts = + rx_status->device_timestamp; + if (elems.tim) + sdata->vif.bss_conf.sync_dtim_count = + elems.tim->dtim_count; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } + changed |= BSS_CHANGED_DTIM_PERIOD; } @@ -3712,10 +3736,33 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; rcu_read_lock(); - ies = rcu_dereference(cbss->ies); - sdata->vif.bss_conf.sync_tsf = ies->tsf; + ies = rcu_dereference(cbss->beacon_ies); + if (ies) { + const u8 *tim_ie; + + sdata->vif.bss_conf.sync_tsf = ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_beacon; + tim_ie = cfg80211_find_ie(WLAN_EID_TIM, + ies->data, ies->len); + if (tim_ie && tim_ie[1] >= 2) + sdata->vif.bss_conf.sync_dtim_count = tim_ie[2]; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } else if (!(local->hw.flags & + IEEE80211_HW_TIMING_BEACON_ONLY)) { + ies = rcu_dereference(cbss->proberesp_ies); + /* must be non-NULL since beacon IEs were NULL */ + sdata->vif.bss_conf.sync_tsf = ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_presp; + sdata->vif.bss_conf.sync_dtim_count = 0; + } else { + sdata->vif.bss_conf.sync_tsf = 0; + sdata->vif.bss_conf.sync_device_ts = 0; + sdata->vif.bss_conf.sync_dtim_count = 0; + } rcu_read_unlock(); - sdata->vif.bss_conf.sync_device_ts = bss->device_ts; /* tell driver about BSSID, basic rates and timing */ ieee80211_bss_info_change_notify(sdata, @@ -4041,13 +4088,23 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, beacon_ies->data, beacon_ies->len); + u8 dtim_count = 0; + if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) { const struct ieee80211_tim_ie *tim; tim = (void *)(tim_ie + 2); ifmgd->dtim_period = tim->dtim_period; + dtim_count = tim->dtim_count; } assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_beacon; + sdata->vif.bss_conf.sync_dtim_count = dtim_count; + } } else { assoc_data->timeout = jiffies; } diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 400153f..edd47d9 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -80,7 +80,10 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss = (void *)cbss->priv; - bss->device_ts = rx_status->device_timestamp; + if (beacon) + bss->device_ts_beacon = rx_status->device_timestamp; + else + bss->device_ts_presp = rx_status->device_timestamp; if (elems->parse_error) { if (beacon) diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index a2ca72c..0bdd7ae 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -340,6 +340,7 @@ TRACE_EVENT(drv_bss_info_changed, __field(u16, assoc_cap) __field(u64, sync_tsf) __field(u32, sync_device_ts) + __field(u8, sync_dtim_count) __field(u32, basic_rates) __array(int, mcast_rate, IEEE80211_NUM_BANDS) __field(u16, ht_operation_mode) @@ -379,6 +380,7 @@ TRACE_EVENT(drv_bss_info_changed, __entry->assoc_cap = info->assoc_capability; __entry->sync_tsf = info->sync_tsf; __entry->sync_device_ts = info->sync_device_ts; + __entry->sync_dtim_count = info->sync_dtim_count; __entry->basic_rates = info->basic_rates; memcpy(__entry->mcast_rate, info->mcast_rate, sizeof(__entry->mcast_rate)); -- cgit v0.10.2 From 09b85568c142fc1c776dea86a24fcb05f0eeb48b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Feb 2013 23:07:41 +0100 Subject: mac80211: remove dynamic PS driver interface The functions were added for some sort of Bluetooth coexistence, but aren't used, so remove them again. Reviewed-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b9e0246..8d25769 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1695,15 +1695,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS * enabled whenever user has enabled powersave. * - * Some hardware need to toggle a single shared antenna between WLAN and - * Bluetooth to facilitate co-existence. These types of hardware set - * limitations on the use of host controlled dynamic powersave whenever there - * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the - * driver may request temporarily going into full power save, in order to - * enable toggling the antenna between BT and WLAN. If the driver requests - * disabling dynamic powersave, the @dynamic_ps_timeout value will be - * temporarily set to zero until the driver re-enables dynamic powersave. - * * Driver informs U-APSD client support by enabling * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS @@ -3939,36 +3930,6 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif); void ieee80211_resume_disconnect(struct ieee80211_vif *vif); /** - * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm - * - * @vif: &struct ieee80211_vif pointer from the add_interface callback. - * - * Some hardware require full power save to manage simultaneous BT traffic - * on the WLAN frequency. Full PSM is required periodically, whenever there are - * burst of BT traffic. The hardware gets information of BT traffic via - * hardware co-existence lines, and consequentially requests mac80211 to - * (temporarily) enter full psm. - * This function will only temporarily disable dynamic PS, not enable PSM if - * it was not already enabled. - * The driver must make sure to re-enable dynamic PS using - * ieee80211_enable_dyn_ps() if the driver has disabled it. - * - */ -void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif); - -/** - * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled - * - * @vif: &struct ieee80211_vif pointer from the add_interface callback. - * - * This function restores dynamic PS after being temporarily disabled via - * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must - * be coupled with an eventual call to this function. - * - */ -void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); - -/** * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring * rssi threshold triggered * diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d794856..fafeb30 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1099,8 +1099,6 @@ struct ieee80211_local { * this will override whatever chosen by mac80211 internally. */ int dynamic_ps_forced_timeout; - int dynamic_ps_user_timeout; - bool disable_dynamic_ps; int user_power_level; /* in dBm, for all interfaces */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a29d09c..1e7662c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -951,39 +951,6 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, return 0; } -void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; - - WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || - !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || - (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); - - local->disable_dynamic_ps = false; - conf->dynamic_ps_timeout = local->dynamic_ps_user_timeout; -} -EXPORT_SYMBOL(ieee80211_enable_dyn_ps); - -void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; - - WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || - !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || - (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); - - local->disable_dynamic_ps = true; - conf->dynamic_ps_timeout = 0; - del_timer_sync(&local->dynamic_ps_timer); - ieee80211_queue_work(&local->hw, - &local->dynamic_ps_enable_work); -} -EXPORT_SYMBOL(ieee80211_disable_dyn_ps); - /* powersave */ static void ieee80211_enable_ps(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) @@ -1086,7 +1053,6 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) } if (count == 1 && ieee80211_powersave_allowed(found)) { - struct ieee80211_conf *conf = &local->hw.conf; s32 beaconint_us; if (latency < 0) @@ -1110,10 +1076,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) else timeout = 100; } - local->dynamic_ps_user_timeout = timeout; - if (!local->disable_dynamic_ps) - conf->dynamic_ps_timeout = - local->dynamic_ps_user_timeout; + local->hw.conf.dynamic_ps_timeout = timeout; if (beaconint_us > latency) { local->ps_sdata = NULL; @@ -1183,8 +1146,7 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - if (!local->disable_dynamic_ps && - local->hw.conf.dynamic_ps_timeout > 0) { + if (local->hw.conf.dynamic_ps_timeout > 0) { /* don't enter PS if TX frames are pending */ if (drv_tx_frames_pending(local)) { mod_timer(&local->dynamic_ps_timer, jiffies + -- cgit v0.10.2 From f1e3e0515646dd0f4c783c1c39839d2706501344 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Feb 2013 23:57:57 +0100 Subject: mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE There are only a few drivers that use HW scan, and all of those don't need a non-idle transition before starting the scan -- some don't even care about idle at all. Remove the flag and code associated with it. The only driver that really actually needed this is wl1251 and it can just do it itself in the hw_scan callback -- implement that. Acked-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 75f6f6c..0fccf72 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -151,8 +151,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | - IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_SCAN_WHILE_IDLE; + IEEE80211_HW_WANT_MONITOR_VIF; hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE; hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index ce6127c..bbb8a5b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -113,7 +113,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_SCAN_WHILE_IDLE | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c index 5ec50a4..74ae8e1 100644 --- a/drivers/net/wireless/ti/wl1251/event.c +++ b/drivers/net/wireless/ti/wl1251/event.c @@ -29,6 +29,8 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, struct event_mailbox *mbox) { + int ret = 0; + wl1251_debug(DEBUG_EVENT, "status: 0x%x, channels: %d", mbox->scheduled_scan_status, mbox->scheduled_scan_channels); @@ -37,9 +39,11 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, ieee80211_scan_completed(wl->hw, false); wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed"); wl->scanning = false; + if (wl->hw->conf.flags & IEEE80211_CONF_IDLE) + ret = wl1251_ps_set_mode(wl, STATION_IDLE); } - return 0; + return ret; } static void wl1251_event_mbox_dump(struct event_mailbox *mbox) diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index f47e8b0..bbbf68c 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -623,7 +623,7 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed) } } - if (changed & IEEE80211_CONF_CHANGE_IDLE) { + if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) { if (conf->flags & IEEE80211_CONF_IDLE) { ret = wl1251_ps_set_mode(wl, STATION_IDLE); if (ret < 0) @@ -895,11 +895,21 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, if (ret < 0) goto out; + if (hw->conf.flags & IEEE80211_CONF_IDLE) { + ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE); + if (ret < 0) + goto out_sleep; + ret = wl1251_join(wl, wl->bss_type, wl->channel, + wl->beacon_int, wl->dtim_period); + if (ret < 0) + goto out_sleep; + } + skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len, req->ie_len); if (!skb) { ret = -ENOMEM; - goto out; + goto out_idle; } if (req->ie_len) memcpy(skb_put(skb, req->ie_len), req->ie, req->ie_len); @@ -908,11 +918,11 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, skb->len); dev_kfree_skb(skb); if (ret < 0) - goto out_sleep; + goto out_idle; ret = wl1251_cmd_trigger_scan_to(wl, 0); if (ret < 0) - goto out_sleep; + goto out_idle; wl->scanning = true; @@ -920,9 +930,13 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, req->n_channels, WL1251_SCAN_NUM_PROBES); if (ret < 0) { wl->scanning = false; - goto out_sleep; + goto out_idle; } + goto out_sleep; +out_idle: + if (hw->conf.flags & IEEE80211_CONF_IDLE) + ret = wl1251_ps_set_mode(wl, STATION_IDLE); out_sleep: wl1251_ps_elp_sleep(wl); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 28a3757..2c2ff3e 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5636,7 +5636,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) IEEE80211_HW_AP_LINK_PS | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | - IEEE80211_HW_SCAN_WHILE_IDLE | IEEE80211_HW_QUEUE_CONTROL; wl->hw->wiphy->cipher_suites = cipher_suites; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8d25769..86ad2c3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1363,10 +1363,6 @@ struct ieee80211_tx_control { * setup strictly in HW. mac80211 should not attempt to do this in * software. * - * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while - * being idle (i.e. mac80211 doesn't have to go idle-off during the - * the scan). - * * @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of * a virtual monitor interface when monitor interfaces are the only * active interfaces. @@ -1408,7 +1404,6 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, - IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 8e604099..b0e32d6 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -151,8 +151,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += snprintf(buf + sf, mxln - sf, "AP_LINK_PS\n"); if (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW) sf += snprintf(buf + sf, mxln - sf, "TX_AMPDU_SETUP_IN_HW\n"); - if (local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE) - sf += snprintf(buf + sf, mxln - sf, "SCAN_WHILE_IDLE\n"); rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf)); kfree(buf); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index deb78e8..3ece8eb 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -151,12 +151,8 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) } } - sdata = rcu_dereference_protected(local->scan_sdata, - lockdep_is_held(&local->mtx)); - if (sdata && !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) { - scanning = true; - sdata->vif.bss_conf.idle = false; - } + scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || + test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type == NL80211_IFTYPE_MONITOR || diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 2220331..38b3468 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -696,9 +696,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return -EINVAL; #endif - if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan) - return -EINVAL; - if (!local->use_chanctx) { for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { const struct ieee80211_iface_combination *comb; -- cgit v0.10.2 From fd0f979a1b67f0889aea24a7c7d2a54d6706a1cf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 00:14:51 +0100 Subject: mac80211: simplify idle handling Now that we have channel contexts, idle is (pretty much) equivalent to not having a channel context. Change the code to use this relation so that there no longer is a need for a lot of idle recalculate calls everywhere. Signed-off-by: Johannes Berg diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index b5b5076..038f249 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -91,6 +91,10 @@ ieee80211_new_chanctx(struct ieee80211_local *local, list_add_rcu(&ctx->list, &local->chanctx_list); + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); + return ctx; } @@ -110,6 +114,10 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, list_del_rcu(&ctx->list); kfree_rcu(ctx, rcu_head); + + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); } static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, @@ -128,6 +136,8 @@ static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ctx->refcount++; ieee80211_recalc_txpower(sdata); + sdata->vif.bss_conf.idle = false; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); return 0; } @@ -175,6 +185,9 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ctx->refcount--; rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); + sdata->vif.bss_conf.idle = true; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + drv_unassign_vif_chanctx(local, sdata, ctx); if (ctx->refcount > 0) { diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 055fa94..2db1f2b 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1108,10 +1108,6 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, mutex_unlock(&sdata->u.ibss.mtx); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - /* * 802.11n-2009 9.13.3.1: In an IBSS, the HT Protection field is * reserved, but an HT STA shall protect HT transmissions as though @@ -1209,9 +1205,5 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) mutex_unlock(&sdata->u.ibss.mtx); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - return 0; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fafeb30..5635dfc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -689,9 +689,6 @@ struct ieee80211_sub_if_data { char name[IFNAMSIZ]; - /* to detect idle changes */ - bool old_idle; - /* Fragment table for host-based reassembly */ struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX]; unsigned int fragment_next; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 3ece8eb..40ff030 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -78,8 +78,7 @@ void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER); } -static u32 ieee80211_idle_off(struct ieee80211_local *local, - const char *reason) +static u32 ieee80211_idle_off(struct ieee80211_local *local) { if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) return 0; @@ -99,106 +98,45 @@ static u32 ieee80211_idle_on(struct ieee80211_local *local) return IEEE80211_CONF_CHANGE_IDLE; } -static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) +void ieee80211_recalc_idle(struct ieee80211_local *local) { - struct ieee80211_sub_if_data *sdata; - int count = 0; - bool working = false, scanning = false; + bool working = false, scanning, active; unsigned int led_trig_start = 0, led_trig_stop = 0; struct ieee80211_roc_work *roc; + u32 change; -#ifdef CONFIG_PROVE_LOCKING - WARN_ON(debug_locks && !lockdep_rtnl_is_held() && - !lockdep_is_held(&local->iflist_mtx)); -#endif lockdep_assert_held(&local->mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (!ieee80211_sdata_running(sdata)) { - sdata->vif.bss_conf.idle = true; - continue; - } - - sdata->old_idle = sdata->vif.bss_conf.idle; - - /* do not count disabled managed interfaces */ - if (sdata->vif.type == NL80211_IFTYPE_STATION && - !sdata->u.mgd.associated && - !sdata->u.mgd.auth_data && - !sdata->u.mgd.assoc_data) { - sdata->vif.bss_conf.idle = true; - continue; - } - /* do not count unused IBSS interfaces */ - if (sdata->vif.type == NL80211_IFTYPE_ADHOC && - !sdata->u.ibss.ssid_len) { - sdata->vif.bss_conf.idle = true; - continue; - } - - if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) - continue; - - /* count everything else */ - sdata->vif.bss_conf.idle = false; - count++; - } + active = !list_empty(&local->chanctx_list); if (!local->ops->remain_on_channel) { list_for_each_entry(roc, &local->roc_list, list) { working = true; - roc->sdata->vif.bss_conf.idle = false; + break; } } scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN || - sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) - continue; - if (sdata->old_idle == sdata->vif.bss_conf.idle) - continue; - if (!ieee80211_sdata_running(sdata)) - continue; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); - } - if (working || scanning) led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; else led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; - if (count) + if (active) led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; else led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); - if (working) - return ieee80211_idle_off(local, "working"); - if (scanning) - return ieee80211_idle_off(local, "scanning"); - if (!count) - return ieee80211_idle_on(local); + if (working || scanning || active) + change = ieee80211_idle_off(local); else - return ieee80211_idle_off(local, "in use"); - - return 0; -} - -void ieee80211_recalc_idle(struct ieee80211_local *local) -{ - u32 chg; - - mutex_lock(&local->iflist_mtx); - chg = __ieee80211_recalc_idle(local); - mutex_unlock(&local->iflist_mtx); - if (chg) - ieee80211_hw_config(local, chg); + change = ieee80211_idle_on(local); + if (change) + ieee80211_hw_config(local, change); } static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) @@ -692,10 +630,6 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) if (sdata->flags & IEEE80211_SDATA_PROMISC) atomic_inc(&local->iff_promiscs); - mutex_lock(&local->mtx); - hw_reconf_flags |= __ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - if (coming_up) local->open_count++; @@ -888,10 +822,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, sdata->bss = NULL; - mutex_lock(&local->mtx); - hw_reconf_flags |= __ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - ieee80211_recalc_ps(local, -1); if (local->open_count == 0) { diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1e7662c..3bcf393 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1792,7 +1792,6 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get); static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct ieee80211_local *local = sdata->local; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; mutex_lock(&ifmgd->mtx); @@ -1812,10 +1811,6 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) * but that's not a problem. */ cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); } static void ieee80211_beacon_connection_loss_work(struct work_struct *work) @@ -2048,10 +2043,6 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return RX_MGMT_CFG80211_DEAUTH; } @@ -2079,10 +2070,6 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return RX_MGMT_CFG80211_DISASSOC; } @@ -2839,7 +2826,6 @@ static void ieee80211_sta_timer(unsigned long data) static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, u8 *bssid, u8 reason, bool tx) { - struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; @@ -2853,10 +2839,6 @@ static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, */ cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - mutex_lock(&ifmgd->mtx); } @@ -3127,10 +3109,6 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } mutex_unlock(&ifmgd->mtx); - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); } static void ieee80211_sta_bcn_mon_timer(unsigned long data) @@ -3644,10 +3622,6 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, return -ENOMEM; } - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; @@ -4138,10 +4112,6 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, mutex_unlock(&ifmgd->mtx); out: - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - if (sent_frame) __cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); @@ -4182,10 +4152,6 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, __cfg80211_send_disassoc(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return 0; } -- cgit v0.10.2 From 3e4d40fa118e58ce51e85015587a944ec5c69400 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 17:19:08 +0100 Subject: mac80211: remove unused code to mark AP station authenticated When we get to association, the AP station already exists and is marked authenticated, so moving it into IEEE80211_STA_AUTH again is a NOP, remove it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3bcf393..76cacdb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2212,9 +2212,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.wmm_param) set_sta_flag(sta, WLAN_STA_WME); - err = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (!err) - err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); if (err) { -- cgit v0.10.2 From dd40851521361e07c1f61e79cca941a63ad311bc Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sun, 10 Feb 2013 02:33:35 +0000 Subject: ipv6: don't let node/interface scoped multicast traffic escape on the wire Reported-by: Erik Hugne Cc: Erik Hugne Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index c953825..155eccf 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -120,6 +120,13 @@ static int ip6_finish_output2(struct sk_buff *skb) IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST, skb->len); + + if (IPV6_ADDR_MC_SCOPE(&ipv6_hdr(skb)->daddr) <= + IPV6_ADDR_SCOPE_NODELOCAL && + !(dev->flags & IFF_LOOPBACK)) { + kfree_skb(skb); + return 0; + } } rcu_read_lock_bh(); -- cgit v0.10.2 From 20314092c1b41894d8c181bf9aa6f022be2416aa Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sun, 10 Feb 2013 05:35:22 +0000 Subject: ipv6: don't accept multicast traffic with scope 0 v2: a) moved before multicast source address check b) changed comment to netdev style Cc: Erik Hugne Cc: YOSHIFUJI Hideaki Acked-by: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 4ac5bf3..5b10414 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -118,6 +118,15 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt ipv6_addr_loopback(&hdr->daddr)) goto err; + /* RFC4291 2.7 + * Nodes must not originate a packet to a multicast address whose scope + * field contains the reserved value 0; if such a packet is received, it + * must be silently dropped. + */ + if (ipv6_addr_is_multicast(&hdr->daddr) && + IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0) + goto err; + /* * RFC4291 2.7 * Multicast addresses must not be used as source addresses in IPv6 -- cgit v0.10.2 From 2c5e89338493882719f8d138f8f2717ee9a04153 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sun, 10 Feb 2013 03:50:18 +0000 Subject: ipv6: by default join ff01::1 and in case of forwarding ff01::2 and ff05:2 Cc: Erik Hugne Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/include/linux/in6.h b/include/linux/in6.h index a16e193..34edf1f 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -36,4 +36,13 @@ extern const struct in6_addr in6addr_linklocal_allnodes; extern const struct in6_addr in6addr_linklocal_allrouters; #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \ { { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } } +extern const struct in6_addr in6addr_interfacelocal_allnodes; +#define IN6ADDR_INTERFACELOCAL_ALLNODES_INIT \ + { { { 0xff,1,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } } +extern const struct in6_addr in6addr_interfacelocal_allrouters; +#define IN6ADDR_INTERFACELOCAL_ALLROUTERS_INIT \ + { { { 0xff,1,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } } +extern const struct in6_addr in6addr_sitelocal_allrouters; +#define IN6ADDR_SITELOCAL_ALLROUTERS_INIT \ + { { { 0xff,5,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } } #endif diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index bd9f936..86c235d 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -244,6 +244,9 @@ const struct in6_addr in6addr_any = IN6ADDR_ANY_INIT; const struct in6_addr in6addr_loopback = IN6ADDR_LOOPBACK_INIT; const struct in6_addr in6addr_linklocal_allnodes = IN6ADDR_LINKLOCAL_ALLNODES_INIT; const struct in6_addr in6addr_linklocal_allrouters = IN6ADDR_LINKLOCAL_ALLROUTERS_INIT; +const struct in6_addr in6addr_interfacelocal_allnodes = IN6ADDR_INTERFACELOCAL_ALLNODES_INIT; +const struct in6_addr in6addr_interfacelocal_allrouters = IN6ADDR_INTERFACELOCAL_ALLROUTERS_INIT; +const struct in6_addr in6addr_sitelocal_allrouters = IN6ADDR_SITELOCAL_ALLROUTERS_INIT; /* Check if a valid qdisc is available */ static inline bool addrconf_qdisc_ok(const struct net_device *dev) @@ -428,6 +431,9 @@ static struct inet6_dev *ipv6_add_dev(struct net_device *dev) /* protected by rtnl_lock */ rcu_assign_pointer(dev->ip6_ptr, ndev); + /* Join interface-local all-node multicast group */ + ipv6_dev_mc_inc(dev, &in6addr_interfacelocal_allnodes); + /* Join all-node multicast group */ ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes); @@ -611,10 +617,15 @@ static void dev_forward_change(struct inet6_dev *idev) if (idev->cnf.forwarding) dev_disable_lro(dev); if (dev->flags & IFF_MULTICAST) { - if (idev->cnf.forwarding) + if (idev->cnf.forwarding) { ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters); - else + ipv6_dev_mc_inc(dev, &in6addr_interfacelocal_allrouters); + ipv6_dev_mc_inc(dev, &in6addr_sitelocal_allrouters); + } else { ipv6_dev_mc_dec(dev, &in6addr_linklocal_allrouters); + ipv6_dev_mc_dec(dev, &in6addr_interfacelocal_allrouters); + ipv6_dev_mc_dec(dev, &in6addr_sitelocal_allrouters); + } } list_for_each_entry(ifa, &idev->addr_list, if_list) { -- cgit v0.10.2 From b2748267d6487857f1400dc42748c5409e0ee130 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 10 Feb 2013 11:41:01 +0000 Subject: bridge: use dev->addr_assign_type to see if user change mac And remove no longer used br->flags. Signed-off-by: Jiri Pirko Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index e1bc090..ba6fb2d 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -176,7 +176,6 @@ static int br_set_mac_address(struct net_device *dev, void *p) br_fdb_change_mac_address(br, addr->sa_data); br_stp_change_bridge_id(br, addr->sa_data); } - br->flags |= BR_SET_MAC_ADDR; spin_unlock_bh(&br->lock); return 0; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 711094a..06e85d9 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -197,9 +197,6 @@ struct net_bridge bool nf_call_ip6tables; bool nf_call_arptables; #endif - unsigned long flags; -#define BR_SET_MAC_ADDR 0x00000001 - u16 group_fwd_mask; /* STP */ diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c index 7b5197c..0bdb4eb 100644 --- a/net/bridge/br_stp_if.c +++ b/net/bridge/br_stp_if.c @@ -216,7 +216,7 @@ bool br_stp_recalculate_bridge_id(struct net_bridge *br) struct net_bridge_port *p; /* user has chosen a value so keep it */ - if (br->flags & BR_SET_MAC_ADDR) + if (br->dev->addr_assign_type == NET_ADDR_SET) return false; list_for_each_entry(p, &br->port_list, list) { -- cgit v0.10.2 From 954b1244530064d48dde133f906026e56ba0ae56 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 11 Feb 2013 06:22:28 +0000 Subject: ethtool: fix sparse warning Fixes sparse complaints about dropping __user in casts. warning: cast removes address space of expression Signed-off-by: Stephen Hemminger Acked-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/net/socket.c b/net/socket.c index 5c4d82c..ee0d029 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2837,7 +2837,7 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32) } ifr = compat_alloc_user_space(buf_size); - rxnfc = (void *)ifr + ALIGN(sizeof(struct ifreq), 8); + rxnfc = (void __user *)ifr + ALIGN(sizeof(struct ifreq), 8); if (copy_in_user(&ifr->ifr_name, &ifr32->ifr_name, IFNAMSIZ)) return -EFAULT; @@ -2861,12 +2861,12 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32) offsetof(struct ethtool_rxnfc, fs.ring_cookie)); if (copy_in_user(rxnfc, compat_rxnfc, - (void *)(&rxnfc->fs.m_ext + 1) - - (void *)rxnfc) || + (void __user *)(&rxnfc->fs.m_ext + 1) - + (void __user *)rxnfc) || copy_in_user(&rxnfc->fs.ring_cookie, &compat_rxnfc->fs.ring_cookie, - (void *)(&rxnfc->fs.location + 1) - - (void *)&rxnfc->fs.ring_cookie) || + (void __user *)(&rxnfc->fs.location + 1) - + (void __user *)&rxnfc->fs.ring_cookie) || copy_in_user(&rxnfc->rule_cnt, &compat_rxnfc->rule_cnt, sizeof(rxnfc->rule_cnt))) return -EFAULT; @@ -2878,12 +2878,12 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32) if (convert_out) { if (copy_in_user(compat_rxnfc, rxnfc, - (const void *)(&rxnfc->fs.m_ext + 1) - - (const void *)rxnfc) || + (const void __user *)(&rxnfc->fs.m_ext + 1) - + (const void __user *)rxnfc) || copy_in_user(&compat_rxnfc->fs.ring_cookie, &rxnfc->fs.ring_cookie, - (const void *)(&rxnfc->fs.location + 1) - - (const void *)&rxnfc->fs.ring_cookie) || + (const void __user *)(&rxnfc->fs.location + 1) - + (const void __user *)&rxnfc->fs.ring_cookie) || copy_in_user(&compat_rxnfc->rule_cnt, &rxnfc->rule_cnt, sizeof(rxnfc->rule_cnt))) return -EFAULT; -- cgit v0.10.2 From 7e307c67c94619fa53b22735673fbf99b427e760 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 11 Feb 2013 06:25:24 +0000 Subject: mrp: make mrp_rcv static Sparse spotted local function that could be static. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/802/mrp.c b/net/802/mrp.c index 47a9e14..a4cc322 100644 --- a/net/802/mrp.c +++ b/net/802/mrp.c @@ -744,8 +744,8 @@ static int mrp_pdu_parse_msg(struct mrp_applicant *app, struct sk_buff *skb, return 0; } -int mrp_rcv(struct sk_buff *skb, struct net_device *dev, - struct packet_type *pt, struct net_device *orig_dev) +static int mrp_rcv(struct sk_buff *skb, struct net_device *dev, + struct packet_type *pt, struct net_device *orig_dev) { struct mrp_application *appl = container_of(pt, struct mrp_application, pkttype); -- cgit v0.10.2 From dd5ee59bb005df38ca3ee00bc6ac349dc3370e4f Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 4 Feb 2013 15:38:23 +0530 Subject: ath9k: Fix ATH9K_HW_CAP_HT usage There are a few places where the station's HT capabilities should be checked instead of ATH9K_HW_CAP_HT, which is a global feature for the driver. Fix this. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 5432f12..6e66f9c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -320,28 +320,25 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, struct ieee80211_vif *vif) { struct ath_node *an; - u8 density; an = (struct ath_node *)sta->drv_priv; an->sc = sc; an->sta = sta; an->vif = vif; - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { - ath_tx_node_init(sc, an); + ath_tx_node_init(sc, an); + + if (sta->ht_cap.ht_supported) { an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor); - density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); - an->mpdudensity = density; + an->mpdudensity = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); } } static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) { struct ath_node *an = (struct ath_node *)sta->drv_priv; - - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) - ath_tx_node_cleanup(sc, an); + ath_tx_node_cleanup(sc, an); } void ath9k_tasklet(unsigned long data) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index feacaaf..89a6441 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1233,7 +1233,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, * in HT IBSS when a beacon with HT-info is received after the station * has already been added. */ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { + if (sta->ht_cap.ht_supported) { an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor); density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); @@ -1904,8 +1904,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct sk_buff *skb, struct ath_buf *bf; u8 tidno; - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) && txctl->an && - ieee80211_is_data_qos(hdr->frame_control)) { + if (txctl->an && ieee80211_is_data_qos(hdr->frame_control)) { tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; tid = ATH_AN_2_TID(txctl->an, tidno); -- cgit v0.10.2 From 1a6404a1d8497692f31808319d662c739033c491 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 4 Feb 2013 15:38:24 +0530 Subject: ath9k: Fix IBSS joiner mode On joining an existing IBSS network, beaconing has to start only after a TSF sync has happened by receiving a beacon from the BSS. In creator mode, beaconing can start immediately after a HW reset has been done. Now that mac80211 notifies the driver of the mode type (creator/joiner) via ieee80211_bss_conf->ibss_creator, make use of it to properly setup the HW beacon timers. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 97c90b2..a56b241 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -389,6 +389,7 @@ struct ath_beacon_config { u16 bmiss_timeout; u8 dtim_count; bool enable_beacon; + bool ibss_creator; }; struct ath_beacon { diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index dd37719..5f05c26 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -407,12 +407,17 @@ void ath9k_beacon_tasklet(unsigned long data) } } -static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt, u32 intval) +/* + * Both nexttbtt and intval have to be in usecs. + */ +static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt, + u32 intval, bool reset_tsf) { struct ath_hw *ah = sc->sc_ah; ath9k_hw_disable_interrupts(ah); - ath9k_hw_reset_tsf(ah); + if (reset_tsf) + ath9k_hw_reset_tsf(ah); ath9k_beaconq_config(sc); ath9k_hw_beaconinit(ah, nexttbtt, intval); sc->beacon.bmisscnt = 0; @@ -442,10 +447,12 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc, else ah->imask &= ~ATH9K_INT_SWBA; - ath_dbg(common, BEACON, "AP nexttbtt: %u intval: %u conf_intval: %u\n", + ath_dbg(common, BEACON, + "AP (%s) nexttbtt: %u intval: %u conf_intval: %u\n", + (conf->enable_beacon) ? "Enable" : "Disable", nexttbtt, intval, conf->beacon_interval); - ath9k_beacon_init(sc, nexttbtt, intval); + ath9k_beacon_init(sc, nexttbtt, intval, true); } /* @@ -586,17 +593,45 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc, ath9k_reset_beacon_status(sc); intval = TU_TO_USEC(conf->beacon_interval); - nexttbtt = intval; + + if (conf->ibss_creator) { + nexttbtt = intval; + } else { + u32 tbtt, offset, tsftu; + u64 tsf; + + /* + * Pull nexttbtt forward to reflect the current + * sync'd TSF. + */ + tsf = ath9k_hw_gettsf64(ah); + tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE; + offset = tsftu % conf->beacon_interval; + tbtt = tsftu - offset; + if (offset) + tbtt += conf->beacon_interval; + + nexttbtt = TU_TO_USEC(tbtt); + } if (conf->enable_beacon) ah->imask |= ATH9K_INT_SWBA; else ah->imask &= ~ATH9K_INT_SWBA; - ath_dbg(common, BEACON, "IBSS nexttbtt: %u intval: %u conf_intval: %u\n", + ath_dbg(common, BEACON, + "IBSS (%s) nexttbtt: %u intval: %u conf_intval: %u\n", + (conf->enable_beacon) ? "Enable" : "Disable", nexttbtt, intval, conf->beacon_interval); - ath9k_beacon_init(sc, nexttbtt, intval); + ath9k_beacon_init(sc, nexttbtt, intval, conf->ibss_creator); + + /* + * Set the global 'beacon has been configured' flag for the + * joiner case in IBSS mode. + */ + if (!conf->ibss_creator && conf->enable_beacon) + set_bit(SC_OP_BEACONS, &sc->sc_flags); } bool ath9k_allow_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif) @@ -639,6 +674,7 @@ static void ath9k_cache_beacon_config(struct ath_softc *sc, cur_conf->dtim_period = bss_conf->dtim_period; cur_conf->listen_interval = 1; cur_conf->dtim_count = 1; + cur_conf->ibss_creator = bss_conf->ibss_creator; cur_conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval; @@ -666,34 +702,59 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif, { struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf; + unsigned long flags; + bool skip_beacon = false; if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) { ath9k_cache_beacon_config(sc, bss_conf); ath9k_set_beacon(sc); set_bit(SC_OP_BEACONS, &sc->sc_flags); - } else { - /* - * Take care of multiple interfaces when - * enabling/disabling SWBA. - */ - if (changed & BSS_CHANGED_BEACON_ENABLED) { - if (!bss_conf->enable_beacon && - (sc->nbcnvifs <= 1)) { - cur_conf->enable_beacon = false; - } else if (bss_conf->enable_beacon) { - cur_conf->enable_beacon = true; - ath9k_cache_beacon_config(sc, bss_conf); - } + return; + + } + + /* + * Take care of multiple interfaces when + * enabling/disabling SWBA. + */ + if (changed & BSS_CHANGED_BEACON_ENABLED) { + if (!bss_conf->enable_beacon && + (sc->nbcnvifs <= 1)) { + cur_conf->enable_beacon = false; + } else if (bss_conf->enable_beacon) { + cur_conf->enable_beacon = true; + ath9k_cache_beacon_config(sc, bss_conf); } + } - if (cur_conf->beacon_interval) { + /* + * Configure the HW beacon registers only when we have a valid + * beacon interval. + */ + if (cur_conf->beacon_interval) { + /* + * If we are joining an existing IBSS network, start beaconing + * only after a TSF-sync has taken place. Ensure that this + * happens by setting the appropriate flags. + */ + if ((changed & BSS_CHANGED_IBSS) && !bss_conf->ibss_creator && + bss_conf->enable_beacon) { + spin_lock_irqsave(&sc->sc_pm_lock, flags); + sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; + spin_unlock_irqrestore(&sc->sc_pm_lock, flags); + skip_beacon = true; + } else { ath9k_set_beacon(sc); - - if (cur_conf->enable_beacon) - set_bit(SC_OP_BEACONS, &sc->sc_flags); - else - clear_bit(SC_OP_BEACONS, &sc->sc_flags); } + + /* + * Do not set the SC_OP_BEACONS flag for IBSS joiner mode + * here, it is done in ath9k_beacon_config_adhoc(). + */ + if (cur_conf->enable_beacon && !skip_beacon) + set_bit(SC_OP_BEACONS, &sc->sc_flags); + else + clear_bit(SC_OP_BEACONS, &sc->sc_flags); } } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 2d0fd17..ee156e5 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -533,7 +533,7 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb) if (sc->ps_flags & PS_BEACON_SYNC) { sc->ps_flags &= ~PS_BEACON_SYNC; ath_dbg(common, PS, - "Reconfigure Beacon timers based on timestamp from the AP\n"); + "Reconfigure beacon timers based on synchronized timestamp\n"); ath9k_set_beacon(sc); } -- cgit v0.10.2 From dd04e6acd828d51255fbb2d9b7b0e5b85df04f0b Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:06 -0800 Subject: mwifiex: store card specific data in PCI device table entry This patch adds support for storing PCIe device specific data into driver_data structure of pci_device_id. When a device with known device_id is probed, we use this driver_data to populate card specific structres in driver. This enables to remove device specific defines for scratch registers, firmware name, FW download block size, etc. from source code. This will make addition of support for new chipsets a lot easier. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index df88e65..29c539b 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -94,6 +94,13 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev, card->dev = pdev; + if (ent->driver_data) { + struct mwifiex_pcie_device *data = (void *)ent->driver_data; + card->pcie.firmware = data->firmware; + card->pcie.reg = data->reg; + card->pcie.blksz_fw_dl = data->blksz_fw_dl; + } + if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops, MWIFIEX_PCIE)) { pr_err("%s failed\n", __func__); @@ -237,6 +244,7 @@ static DEFINE_PCI_DEVICE_TABLE(mwifiex_ids) = { { PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + .driver_data = (unsigned long) &mwifiex_pcie8766, }, {}, }; @@ -369,6 +377,7 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int i; /* @@ -377,7 +386,7 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->txbd_wrptr = 0; - card->txbd_rdptr |= MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->txbd_rdptr |= reg->tx_rollover_ind; /* allocate shared memory for the BD ring and divide the same in to several descriptors */ @@ -417,6 +426,7 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; @@ -440,7 +450,7 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) card->txbd_ring_pbase); card->txbd_ring_size = 0; card->txbd_wrptr = 0; - card->txbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->txbd_rdptr = 0 | reg->tx_rollover_ind; card->txbd_ring_vbase = NULL; card->txbd_ring_pbase = 0; @@ -453,6 +463,7 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; dma_addr_t buf_pa; @@ -463,7 +474,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->rxbd_wrptr = 0; - card->rxbd_rdptr |= MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->rxbd_rdptr = reg->rx_rollover_ind; card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * MWIFIEX_MAX_TXRX_BD; @@ -526,6 +537,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; @@ -550,7 +562,7 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) card->rxbd_ring_pbase); card->rxbd_ring_size = 0; card->rxbd_wrptr = 0; - card->rxbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->rxbd_rdptr = 0 | reg->rx_rollover_ind; card->rxbd_ring_vbase = NULL; card->rxbd_ring_pbase = 0; @@ -563,6 +575,7 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; dma_addr_t buf_pa; @@ -573,7 +586,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->evtbd_wrptr = 0; - card->evtbd_rdptr |= MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->evtbd_rdptr = reg->evt_rollover_ind; card->evtbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * MWIFIEX_MAX_EVT_BD; @@ -636,6 +649,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; @@ -658,7 +672,7 @@ static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_ring_vbase, card->evtbd_ring_pbase); card->evtbd_wrptr = 0; - card->evtbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->evtbd_rdptr = 0 | reg->evt_rollover_ind; card->evtbd_ring_size = 0; card->evtbd_ring_vbase = NULL; card->evtbd_ring_pbase = 0; @@ -771,12 +785,13 @@ static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 rdptr; /* Read the TX ring read pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { + if (mwifiex_read_reg(adapter, reg->tx_rdptr, &rdptr)) { dev_err(adapter->dev, - "Flush TXBD: failed to read REG_TXBD_RDPTR\n"); + "Flush TXBD: failed to read reg->tx_rdptr\n"); return -1; } @@ -805,14 +820,15 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) dma_addr_t buf_pa; u32 wrdoneidx, rdptr, unmap_count = 0; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); /* Read the TX ring read pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { + if (mwifiex_read_reg(adapter, reg->tx_rdptr, &rdptr)) { dev_err(adapter->dev, - "SEND COMP: failed to read REG_TXBD_RDPTR\n"); + "SEND COMP: failed to read reg->tx_rdptr\n"); return -1; } @@ -820,11 +836,11 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) card->txbd_rdptr, rdptr); /* free from previous txbd_rdptr to current txbd_rdptr */ - while (((card->txbd_rdptr & MWIFIEX_TXBD_MASK) != - (rdptr & MWIFIEX_TXBD_MASK)) || - ((card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { - wrdoneidx = card->txbd_rdptr & MWIFIEX_TXBD_MASK; + while (((card->txbd_rdptr & reg->tx_mask) != + (rdptr & reg->tx_mask)) || + ((card->txbd_rdptr & reg->tx_rollover_ind) != + (rdptr & reg->tx_rollover_ind))) { + wrdoneidx = card->txbd_rdptr & reg->tx_mask; skb = card->tx_buf_list[wrdoneidx]; if (skb) { @@ -850,20 +866,20 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) card->txbd_ring[wrdoneidx]->flags = 0; card->txbd_rdptr++; - if ((card->txbd_rdptr & MWIFIEX_TXBD_MASK) == num_tx_buffs) + if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) card->txbd_rdptr = ((card->txbd_rdptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->tx_rollover_ind) ^ + reg->tx_rollover_ind); } if (unmap_count) adapter->data_sent = false; if (card->txbd_flush) { - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == - (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) && - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + if (((card->txbd_wrptr & reg->tx_mask) == + (card->txbd_rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (card->txbd_rdptr & reg->tx_rollover_ind))) card->txbd_flush = 0; else mwifiex_clean_pcie_ring_buf(adapter); @@ -883,6 +899,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, struct mwifiex_tx_param *tx_param) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 wrindx; int ret; dma_addr_t buf_pa; @@ -913,7 +930,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, PCI_DMA_TODEVICE)) return -1; - wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK; + wrindx = card->txbd_wrptr & reg->tx_mask; MWIFIEX_SKB_PACB(skb, &buf_pa); card->tx_buf_list[wrindx] = skb; card->txbd_ring[wrindx]->paddr = buf_pa; @@ -921,17 +938,17 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | MWIFIEX_BD_FLAG_LAST_DESC; - if ((++card->txbd_wrptr & MWIFIEX_TXBD_MASK) == + if ((++card->txbd_wrptr & reg->tx_mask) == MWIFIEX_MAX_TXRX_BD) card->txbd_wrptr = ((card->txbd_wrptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->tx_rollover_ind) ^ + reg->tx_rollover_ind); - /* Write the TX ring write pointer in to REG_TXBD_WRPTR */ - if (mwifiex_write_reg(adapter, REG_TXBD_WRPTR, + /* Write the TX ring write pointer in to reg->tx_wrptr */ + if (mwifiex_write_reg(adapter, reg->tx_wrptr, card->txbd_wrptr)) { dev_err(adapter->dev, - "SEND DATA: failed to write REG_TXBD_WRPTR\n"); + "SEND DATA: failed to write reg->tx_wrptr\n"); ret = -1; goto done_unmap; } @@ -984,6 +1001,7 @@ done_unmap: static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 wrptr, rd_index; dma_addr_t buf_pa; int ret = 0; @@ -993,23 +1011,23 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) mwifiex_pm_wakeup_card(adapter); /* Read the RX ring Write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) { dev_err(adapter->dev, - "RECV DATA: failed to read REG_TXBD_RDPTR\n"); + "RECV DATA: failed to read reg->rx_wrptr\n"); ret = -1; goto done; } card->rxbd_wrptr = wrptr; - while (((wrptr & MWIFIEX_RXBD_MASK) != - (card->rxbd_rdptr & MWIFIEX_RXBD_MASK)) || - ((wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) == - (card->rxbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { + while (((wrptr & reg->rx_mask) != + (card->rxbd_rdptr & reg->rx_mask)) || + ((wrptr & reg->rx_rollover_ind) == + (card->rxbd_rdptr & reg->rx_rollover_ind))) { struct sk_buff *skb_data; u16 rx_len; __le16 pkt_len; - rd_index = card->rxbd_rdptr & MWIFIEX_RXBD_MASK; + rd_index = card->rxbd_rdptr & reg->rx_mask; skb_data = card->rx_buf_list[rd_index]; MWIFIEX_SKB_PACB(skb_data, &buf_pa); @@ -1051,28 +1069,28 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) card->rxbd_ring[rd_index]->len = skb_tmp->len; card->rxbd_ring[rd_index]->flags = 0; - if ((++card->rxbd_rdptr & MWIFIEX_RXBD_MASK) == + if ((++card->rxbd_rdptr & reg->rx_mask) == MWIFIEX_MAX_TXRX_BD) { card->rxbd_rdptr = ((card->rxbd_rdptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->rx_rollover_ind) ^ + reg->rx_rollover_ind); } dev_dbg(adapter->dev, "info: RECV DATA: \n", card->rxbd_rdptr, wrptr); - /* Write the RX ring read pointer in to REG_RXBD_RDPTR */ - if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, + /* Write the RX ring read pointer in to reg->rx_rdptr */ + if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr)) { dev_err(adapter->dev, - "RECV DATA: failed to write REG_RXBD_RDPTR\n"); + "RECV DATA: failed to write reg->rx_rdptr\n"); ret = -1; goto done; } /* Read the RX ring Write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) { dev_err(adapter->dev, - "RECV DATA: failed to read REG_TXBD_RDPTR\n"); + "RECV DATA: failed to read reg->rx_wrptr\n"); ret = -1; goto done; } @@ -1093,6 +1111,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { dma_addr_t buf_pa; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (!(skb->data && skb->len)) { dev_err(adapter->dev, @@ -1106,9 +1125,10 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) MWIFIEX_SKB_PACB(skb, &buf_pa); - /* Write the lower 32bits of the physical address to scratch - * register 0 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_0_REG, (u32)buf_pa)) { + /* Write the lower 32bits of the physical address to low command + * address scratch register + */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, (u32)buf_pa)) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", __func__); @@ -1117,9 +1137,10 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -1; } - /* Write the upper 32bits of the physical address to scratch - * register 1 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_1_REG, + /* Write the upper 32bits of the physical address to high command + * address scratch register + */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_hi, (u32)((u64)buf_pa >> 32))) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", @@ -1129,10 +1150,10 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -1; } - /* Write the command length to scratch register 2 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_2_REG, skb->len)) { + /* Write the command length to cmd_size scratch register */ + if (mwifiex_write_reg(adapter, reg->cmd_size, skb->len)) { dev_err(adapter->dev, - "%s: failed to write command len to scratch reg 2\n", + "%s: failed to write command len to cmd_size scratch reg\n", __func__); pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, PCI_DMA_TODEVICE); @@ -1158,11 +1179,12 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - /* Write the RX ring read pointer in to REG_RXBD_RDPTR */ - if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, card->rxbd_rdptr | 0)) { + /* Write the RX ring read pointer in to reg->rx_rdptr */ + if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr)) { dev_err(adapter->dev, - "RECV DATA: failed to write REG_RXBD_RDPTR\n"); + "RECV DATA: failed to write reg->rx_rdptr\n"); return -1; } return 0; @@ -1174,6 +1196,7 @@ static int mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int ret = 0; dma_addr_t cmd_buf_pa, cmdrsp_buf_pa; u8 *payload = (u8 *)skb->data; @@ -1206,7 +1229,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) /* To send a command, the driver will: 1. Write the 64bit physical address of the data buffer to - SCRATCH1 + SCRATCH0 + cmd response address low + cmd response address high 2. Ring the door bell (i.e. set the door bell interrupt) In response to door bell interrupt, the firmware will perform @@ -1218,7 +1241,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) MWIFIEX_SKB_PACB(card->cmdrsp_buf, &cmdrsp_buf_pa); /* Write the lower 32bits of the cmdrsp buffer physical address */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_LO, + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, (u32)cmdrsp_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); @@ -1227,7 +1250,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } /* Write the upper 32bits of the cmdrsp buffer physical address */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_HI, + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, (u32)((u64)cmdrsp_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); @@ -1237,15 +1260,16 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } MWIFIEX_SKB_PACB(card->cmd_buf, &cmd_buf_pa); - /* Write the lower 32bits of the physical address to REG_CMD_ADDR_LO */ - if (mwifiex_write_reg(adapter, REG_CMD_ADDR_LO, (u32)cmd_buf_pa)) { + /* Write the lower 32bits of the physical address to reg->cmd_addr_lo */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, + (u32)cmd_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; goto done; } - /* Write the upper 32bits of the physical address to REG_CMD_ADDR_HI */ - if (mwifiex_write_reg(adapter, REG_CMD_ADDR_HI, + /* Write the upper 32bits of the physical address to reg->cmd_addr_hi */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_hi, (u32)((u64)cmd_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); @@ -1253,10 +1277,11 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) goto done; } - /* Write the command length to REG_CMD_SIZE */ - if (mwifiex_write_reg(adapter, REG_CMD_SIZE, card->cmd_buf->len)) { + /* Write the command length to reg->cmd_size */ + if (mwifiex_write_reg(adapter, reg->cmd_size, + card->cmd_buf->len)) { dev_err(adapter->dev, - "Failed to write cmd len to REG_CMD_SIZE\n"); + "Failed to write cmd len to reg->cmd_size\n"); ret = -1; goto done; } @@ -1283,6 +1308,7 @@ done: static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb = card->cmdrsp_buf; int count = 0; u16 rx_len; @@ -1328,14 +1354,14 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) /* Clear the cmd-rsp buffer address in scratch registers. This will prevent firmware from writing to the same response buffer again. */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_LO, 0)) { + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, 0)) { dev_err(adapter->dev, "cmd_done: failed to clear cmd_rsp_addr_lo\n"); return -1; } /* Write the upper 32bits of the cmdrsp buffer physical address */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_HI, 0)) { + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, 0)) { dev_err(adapter->dev, "cmd_done: failed to clear cmd_rsp_addr_hi\n"); return -1; @@ -1380,6 +1406,7 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter, static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr, event; dma_addr_t buf_pa; @@ -1399,9 +1426,9 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) } /* Read the event ring write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_EVTBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) { dev_err(adapter->dev, - "EventReady: failed to read REG_EVTBD_WRPTR\n"); + "EventReady: failed to read reg->evt_wrptr\n"); return -1; } @@ -1409,8 +1436,8 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) card->evtbd_rdptr, wrptr); if (((wrptr & MWIFIEX_EVTBD_MASK) != (card->evtbd_rdptr & MWIFIEX_EVTBD_MASK)) || - ((wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) == - (card->evtbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { + ((wrptr & reg->evt_rollover_ind) == + (card->evtbd_rdptr & reg->evt_rollover_ind))) { struct sk_buff *skb_cmd; __le16 data_len = 0; u16 evt_len; @@ -1462,6 +1489,7 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int ret = 0; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr; @@ -1477,9 +1505,9 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, } /* Read the event ring write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_EVTBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) { dev_err(adapter->dev, - "event_complete: failed to read REG_EVTBD_WRPTR\n"); + "event_complete: failed to read reg->evt_wrptr\n"); return -1; } @@ -1504,17 +1532,18 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, if ((++card->evtbd_rdptr & MWIFIEX_EVTBD_MASK) == MWIFIEX_MAX_EVT_BD) { card->evtbd_rdptr = ((card->evtbd_rdptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->evt_rollover_ind) ^ + reg->evt_rollover_ind); } dev_dbg(adapter->dev, "info: Updated ", card->evtbd_rdptr, wrptr); - /* Write the event ring read pointer in to REG_EVTBD_RDPTR */ - if (mwifiex_write_reg(adapter, REG_EVTBD_RDPTR, card->evtbd_rdptr)) { + /* Write the event ring read pointer in to reg->evt_rdptr */ + if (mwifiex_write_reg(adapter, reg->evt_rdptr, + card->evtbd_rdptr)) { dev_err(adapter->dev, - "event_complete: failed to read REG_EVTBD_RDPTR\n"); + "event_complete: failed to read reg->evt_rdptr\n"); return -1; } @@ -1543,6 +1572,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, u32 block_retry_cnt = 0; dma_addr_t buf_pa; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (!firmware || !firmware_len) { dev_err(adapter->dev, @@ -1574,7 +1604,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, break; for (tries = 0; tries < MAX_POLL_TRIES; tries++) { - ret = mwifiex_read_reg(adapter, PCIE_SCRATCH_2_REG, + ret = mwifiex_read_reg(adapter, reg->cmd_size, &len); if (ret) { dev_warn(adapter->dev, @@ -1620,16 +1650,15 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, dev_dbg(adapter->dev, "."); - tx_blocks = (txlen + - MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD - 1) / - MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD; + tx_blocks = (txlen + card->pcie.blksz_fw_dl - 1) / + card->pcie.blksz_fw_dl; /* Copy payload to buffer */ memmove(skb->data, &firmware[offset], txlen); } skb_put(skb, MWIFIEX_UPLD_SIZE - skb->len); - skb_trim(skb, tx_blocks * MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD); + skb_trim(skb, tx_blocks * card->pcie.blksz_fw_dl); /* Send the boot command to device */ if (mwifiex_pcie_send_boot_cmd(adapter, skb)) { @@ -1682,6 +1711,8 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) { int ret = 0; u32 firmware_stat, winner_status; + struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 tries; /* Mask spurios interrupts */ @@ -1692,7 +1723,8 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) } dev_dbg(adapter->dev, "Setting driver ready signature\n"); - if (mwifiex_write_reg(adapter, REG_DRV_READY, FIRMWARE_READY_PCIE)) { + if (mwifiex_write_reg(adapter, reg->drv_rdy, + FIRMWARE_READY_PCIE)) { dev_err(adapter->dev, "Failed to write driver ready signature\n"); return -1; @@ -1700,7 +1732,7 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) /* Wait for firmware initialization event */ for (tries = 0; tries < poll_num; tries++) { - if (mwifiex_read_reg(adapter, PCIE_SCRATCH_3_REG, + if (mwifiex_read_reg(adapter, reg->fw_status, &firmware_stat)) ret = -1; else @@ -1717,7 +1749,7 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) } if (ret) { - if (mwifiex_read_reg(adapter, PCIE_SCRATCH_3_REG, + if (mwifiex_read_reg(adapter, reg->fw_status, &winner_status)) ret = -1; else if (!winner_status) { @@ -2061,10 +2093,11 @@ static void mwifiex_pcie_cleanup(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; struct pci_dev *pdev = card->dev; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (user_rmmod) { dev_dbg(adapter->dev, "Clearing driver ready signature\n"); - if (mwifiex_write_reg(adapter, REG_DRV_READY, 0x00000000)) + if (mwifiex_write_reg(adapter, reg->drv_rdy, 0x00000000)) dev_err(adapter->dev, "Failed to write driver not-ready signature\n"); } @@ -2102,7 +2135,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) } adapter->dev = &pdev->dev; - strcpy(adapter->fw_name, PCIE8766_DEFAULT_FW_NAME); + strcpy(adapter->fw_name, card->pcie.firmware); return 0; } diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 37eeb2c..7ef660e 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -75,27 +75,6 @@ #define MWIFIEX_BD_FLAG_ROLLOVER_IND BIT(7) #define MWIFIEX_BD_FLAG_FIRST_DESC BIT(0) #define MWIFIEX_BD_FLAG_LAST_DESC BIT(1) -#define REG_CMD_ADDR_LO PCIE_SCRATCH_0_REG -#define REG_CMD_ADDR_HI PCIE_SCRATCH_1_REG -#define REG_CMD_SIZE PCIE_SCRATCH_2_REG - -#define REG_CMDRSP_ADDR_LO PCIE_SCRATCH_4_REG -#define REG_CMDRSP_ADDR_HI PCIE_SCRATCH_5_REG - -/* TX buffer description read pointer */ -#define REG_TXBD_RDPTR PCIE_SCRATCH_6_REG -/* TX buffer description write pointer */ -#define REG_TXBD_WRPTR PCIE_SCRATCH_7_REG -/* RX buffer description read pointer */ -#define REG_RXBD_RDPTR PCIE_SCRATCH_8_REG -/* RX buffer description write pointer */ -#define REG_RXBD_WRPTR PCIE_SCRATCH_9_REG -/* Event buffer description read pointer */ -#define REG_EVTBD_RDPTR PCIE_SCRATCH_10_REG -/* Event buffer description write pointer */ -#define REG_EVTBD_WRPTR PCIE_SCRATCH_11_REG -/* Driver ready signature write pointer */ -#define REG_DRV_READY PCIE_SCRATCH_12_REG /* Max retry number of command write */ #define MAX_WRITE_IOMEM_RETRY 2 @@ -104,6 +83,78 @@ /* FW awake cookie after FW ready */ #define FW_AWAKE_COOKIE (0xAA55AA55) +struct mwifiex_pcie_card_reg { + u16 cmd_addr_lo; + u16 cmd_addr_hi; + u16 fw_status; + u16 cmd_size; + u16 cmdrsp_addr_lo; + u16 cmdrsp_addr_hi; + u16 tx_rdptr; + u16 tx_wrptr; + u16 rx_rdptr; + u16 rx_wrptr; + u16 evt_rdptr; + u16 evt_wrptr; + u16 drv_rdy; + u16 tx_start_ptr; + u32 tx_mask; + u32 tx_wrap_mask; + u32 rx_mask; + u32 rx_wrap_mask; + u32 tx_rollover_ind; + u32 rx_rollover_ind; + u32 evt_rollover_ind; + u8 ring_flag_sop; + u8 ring_flag_eop; + u8 ring_flag_xs_sop; + u8 ring_flag_xs_eop; + u32 ring_tx_start_ptr; + u8 pfu_enabled; +}; + +static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { + .cmd_addr_lo = PCIE_SCRATCH_0_REG, + .cmd_addr_hi = PCIE_SCRATCH_1_REG, + .cmd_size = PCIE_SCRATCH_2_REG, + .fw_status = PCIE_SCRATCH_3_REG, + .cmdrsp_addr_lo = PCIE_SCRATCH_4_REG, + .cmdrsp_addr_hi = PCIE_SCRATCH_5_REG, + .tx_rdptr = PCIE_SCRATCH_6_REG, + .tx_wrptr = PCIE_SCRATCH_7_REG, + .rx_rdptr = PCIE_SCRATCH_8_REG, + .rx_wrptr = PCIE_SCRATCH_9_REG, + .evt_rdptr = PCIE_SCRATCH_10_REG, + .evt_wrptr = PCIE_SCRATCH_11_REG, + .drv_rdy = PCIE_SCRATCH_12_REG, + .tx_start_ptr = 0, + .tx_mask = MWIFIEX_TXBD_MASK, + .tx_wrap_mask = 0, + .rx_mask = MWIFIEX_RXBD_MASK, + .rx_wrap_mask = 0, + .tx_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND, + .rx_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND, + .evt_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND, + .ring_flag_sop = 0, + .ring_flag_eop = 0, + .ring_flag_xs_sop = 0, + .ring_flag_xs_eop = 0, + .ring_tx_start_ptr = 0, + .pfu_enabled = 0, +}; + +struct mwifiex_pcie_device { + const char *firmware; + const struct mwifiex_pcie_card_reg *reg; + u16 blksz_fw_dl; +}; + +static const struct mwifiex_pcie_device mwifiex_pcie8766 = { + .firmware = PCIE8766_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_8766, + .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, +}; + struct mwifiex_pcie_buf_desc { u64 paddr; u16 len; @@ -113,6 +164,7 @@ struct mwifiex_pcie_buf_desc { struct pcie_service_card { struct pci_dev *dev; struct mwifiex_adapter *adapter; + struct mwifiex_pcie_device pcie; u8 txbd_flush; u32 txbd_wrptr; @@ -150,10 +202,11 @@ struct pcie_service_card { static inline int mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) { - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == - (rdptr & MWIFIEX_TXBD_MASK)) && - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (((card->txbd_wrptr & reg->tx_mask) == (rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (rdptr & reg->tx_rollover_ind))) return 1; return 0; @@ -162,10 +215,12 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) static inline int mwifiex_pcie_txbd_not_full(struct pcie_service_card *card) { - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) != - (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) || - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (((card->txbd_wrptr & reg->tx_mask) != + (card->txbd_rdptr & reg->tx_mask)) || + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (card->txbd_rdptr & reg->tx_rollover_ind))) return 1; return 0; -- cgit v0.10.2 From 0732484b47b57ef90bb08408d60fddbad0262d82 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:07 -0800 Subject: mwifiex: separate ring initialization and ring creation routines This patch separates PCIe ring initialization from ring creation routines. This modularizes ring creation(TXBD, RXBD and event rings) functions. Readability has been improved while moving the code around. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 29c539b..06aae55 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -372,13 +372,199 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) } /* - * This function creates buffer descriptor ring for TX + * This function initializes TX buffer ring descriptors + */ +static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + card->tx_buf_list[i] = NULL; + card->txbd_ring[i] = (void *)(card->txbd_ring_vbase + + (sizeof(*desc) * i)); + desc = card->txbd_ring[i]; + memset(desc, 0, sizeof(*desc)); + } + + return 0; +} + +/* This function initializes RX buffer ring descriptors. Each SKB is allocated + * here and after mapping PCI memory, its physical address is assigned to + * PCIE Rx buffer descriptor's physical address. + */ +static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; + struct mwifiex_pcie_buf_desc *desc; + dma_addr_t buf_pa; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + /* Allocate skb here so that firmware can DMA data from it */ + skb = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); + if (!skb) { + dev_err(adapter->dev, + "Unable to allocate skb for RX ring.\n"); + kfree(card->rxbd_ring_vbase); + return -ENOMEM; + } + + if (mwifiex_map_pci_memory(adapter, skb, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); + + dev_dbg(adapter->dev, + "info: RX ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n", + skb, skb->len, skb->data, (u32)buf_pa, + (u32)((u64)buf_pa >> 32)); + + card->rx_buf_list[i] = skb; + card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + + (sizeof(*desc) * i)); + desc = card->rxbd_ring[i]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; + } + + return 0; +} + +/* This function initializes event buffer ring descriptors. Each SKB is + * allocated here and after mapping PCI memory, its physical address is assigned + * to PCIE Rx buffer descriptor's physical address + */ +static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + struct sk_buff *skb; + dma_addr_t buf_pa; + int i; + + for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { + /* Allocate skb here so that firmware can DMA data from it */ + skb = dev_alloc_skb(MAX_EVENT_SIZE); + if (!skb) { + dev_err(adapter->dev, + "Unable to allocate skb for EVENT buf.\n"); + kfree(card->evtbd_ring_vbase); + return -ENOMEM; + } + skb_put(skb, MAX_EVENT_SIZE); + + if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); + + dev_dbg(adapter->dev, + "info: EVT ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n", + skb, skb->len, skb->data, (u32)buf_pa, + (u32)((u64)buf_pa >> 32)); + + card->evt_buf_list[i] = skb; + card->evtbd_ring[i] = (void *)(card->evtbd_ring_vbase + + (sizeof(*desc) * i)); + + desc = card->evtbd_ring[i]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; + } + + return 0; +} + +/* This function cleans up TX buffer rings. If any of the buffer list has valid + * SKB address, associated SKB is freed. + */ +static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; + struct mwifiex_pcie_buf_desc *desc; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + desc = card->txbd_ring[i]; + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + card->tx_buf_list[i] = NULL; + memset(desc, 0, sizeof(*desc)); + } + + return; +} + +/* This function cleans up RX buffer rings. If any of the buffer list has valid + * SKB address, associated SKB is freed. + */ +static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + struct sk_buff *skb; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + desc = card->rxbd_ring[i]; + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } + memset(desc, 0, sizeof(*desc)); + } + + return; +} + +/* This function cleans up event buffer rings. If any of the buffer list has + * valid SKB address, associated SKB is freed. + */ +static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + struct sk_buff *skb; + int i; + + for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { + desc = card->evtbd_ring[i]; + if (card->evt_buf_list[i]) { + skb = card->evt_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } + card->evt_buf_list[i] = NULL; + memset(desc, 0, sizeof(*desc)); + } + + return; +} + +/* This function creates buffer descriptor ring for TX */ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - int i; /* * driver maintaines the write pointer and firmware maintaines the read @@ -408,41 +594,15 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) card->txbd_ring_vbase, (unsigned int)card->txbd_ring_pbase, (u32)((u64)card->txbd_ring_pbase >> 32), card->txbd_ring_size); - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - card->txbd_ring[i] = (struct mwifiex_pcie_buf_desc *) - (card->txbd_ring_vbase + - (sizeof(struct mwifiex_pcie_buf_desc) - * i)); - - card->tx_buf_list[i] = NULL; - card->txbd_ring[i]->paddr = 0; - card->txbd_ring[i]->len = 0; - card->txbd_ring[i]->flags = 0; - } - - return 0; + return mwifiex_init_txq_ring(adapter); } static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->tx_buf_list[i]) { - skb = card->tx_buf_list[i]; - pci_unmap_single(card->dev, card->txbd_ring[i]->paddr, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb_any(skb); - } - card->tx_buf_list[i] = NULL; - card->txbd_ring[i]->paddr = 0; - card->txbd_ring[i]->len = 0; - card->txbd_ring[i]->flags = 0; - card->txbd_ring[i] = NULL; - } + mwifiex_cleanup_txq_ring(adapter); if (card->txbd_ring_vbase) pci_free_consistent(card->dev, card->txbd_ring_size, @@ -464,9 +624,6 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -496,39 +653,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) (u32)((u64)card->rxbd_ring_pbase >> 32), card->rxbd_ring_size); - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - card->rxbd_ring[i] = (struct mwifiex_pcie_buf_desc *) - (card->rxbd_ring_vbase + - (sizeof(struct mwifiex_pcie_buf_desc) - * i)); - - /* Allocate skb here so that firmware can DMA data from it */ - skb = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for RX ring.\n"); - kfree(card->rxbd_ring_vbase); - return -ENOMEM; - } - if (mwifiex_map_pci_memory(adapter, skb, - MWIFIEX_RX_DATA_BUF_SIZE, - PCI_DMA_FROMDEVICE)) - return -1; - - MWIFIEX_SKB_PACB(skb, &buf_pa); - - dev_dbg(adapter->dev, "info: RX ring: add new skb base: %p, " - "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), - skb->len); - - card->rx_buf_list[i] = skb; - card->rxbd_ring[i]->paddr = buf_pa; - card->rxbd_ring[i]->len = (u16)skb->len; - card->rxbd_ring[i]->flags = 0; - } - - return 0; + return mwifiex_init_rxq_ring(adapter); } /* @@ -538,23 +663,8 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->rx_buf_list[i]) { - skb = card->rx_buf_list[i]; - pci_unmap_single(card->dev, card->rxbd_ring[i]->paddr , - MWIFIEX_RX_DATA_BUF_SIZE, - PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(skb); - } - card->rx_buf_list[i] = NULL; - card->rxbd_ring[i]->paddr = 0; - card->rxbd_ring[i]->len = 0; - card->rxbd_ring[i]->flags = 0; - card->rxbd_ring[i] = NULL; - } + mwifiex_cleanup_rxq_ring(adapter); if (card->rxbd_ring_vbase) pci_free_consistent(card->dev, card->rxbd_ring_size, @@ -576,9 +686,6 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -608,39 +715,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) (u32)((u64)card->evtbd_ring_pbase >> 32), card->evtbd_ring_size); - for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { - card->evtbd_ring[i] = (struct mwifiex_pcie_buf_desc *) - (card->evtbd_ring_vbase + - (sizeof(struct mwifiex_pcie_buf_desc) - * i)); - - /* Allocate skb here so that firmware can DMA data from it */ - skb = dev_alloc_skb(MAX_EVENT_SIZE); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for EVENT buf.\n"); - kfree(card->evtbd_ring_vbase); - return -ENOMEM; - } - skb_put(skb, MAX_EVENT_SIZE); - - if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, - PCI_DMA_FROMDEVICE)) - return -1; - - MWIFIEX_SKB_PACB(skb, &buf_pa); - dev_dbg(adapter->dev, "info: Evt ring: add new skb. base: %p, " - "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), - skb->len); - - card->evt_buf_list[i] = skb; - card->evtbd_ring[i]->paddr = buf_pa; - card->evtbd_ring[i]->len = (u16)skb->len; - card->evtbd_ring[i]->flags = 0; - } - - return 0; + return mwifiex_pcie_init_evt_ring(adapter); } /* @@ -650,22 +725,8 @@ static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { - if (card->evt_buf_list[i]) { - skb = card->evt_buf_list[i]; - pci_unmap_single(card->dev, card->evtbd_ring[i]->paddr, - MAX_EVENT_SIZE, PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(skb); - } - card->evt_buf_list[i] = NULL; - card->evtbd_ring[i]->paddr = 0; - card->evtbd_ring[i]->len = 0; - card->evtbd_ring[i]->flags = 0; - card->evtbd_ring[i] = NULL; - } + mwifiex_cleanup_evt_ring(adapter); if (card->evtbd_ring_vbase) pci_free_consistent(card->dev, card->evtbd_ring_size, -- cgit v0.10.2 From e05dc3e93c136ecd329ed2d57d4eb2e82f530304 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:08 -0800 Subject: mwifiex: define generic data type for PCIe ring buffers This patch defines PCIe ring buffer array pointer as void instead of mwifiex_pcie_buf_desc. This will enable us to use same pointers for ring operations instead of new structures if buffer descriptor structure changes. Also split out event buffer descriptor structure from struct mwifiex_pcie_buf_desc. For PCIe8766 TX/RX buffer descriptor is same as evevt buffer descriptor. Newer chips could use different TX/RX buffer descriptor while event descriptor remains the same. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 06aae55..6c15969 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -444,7 +444,7 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; - struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_evt_buf_desc *desc; struct sk_buff *skb; dma_addr_t buf_pa; int i; @@ -474,7 +474,6 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) card->evt_buf_list[i] = skb; card->evtbd_ring[i] = (void *)(card->evtbd_ring_vbase + (sizeof(*desc) * i)); - desc = card->evtbd_ring[i]; desc->paddr = buf_pa; desc->len = (u16)skb->len; @@ -540,7 +539,7 @@ static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; - struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_evt_buf_desc *desc; struct sk_buff *skb; int i; @@ -695,7 +694,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_wrptr = 0; card->evtbd_rdptr = reg->evt_rollover_ind; - card->evtbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * + card->evtbd_ring_size = sizeof(struct mwifiex_evt_buf_desc) * MWIFIEX_MAX_EVT_BD; dev_dbg(adapter->dev, "info: evtbd_ring: Allocating %d bytes\n", card->evtbd_ring_size); @@ -880,6 +879,7 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) struct sk_buff *skb; dma_addr_t buf_pa; u32 wrdoneidx, rdptr, unmap_count = 0; + struct mwifiex_pcie_buf_desc *desc; struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; @@ -922,9 +922,8 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) } card->tx_buf_list[wrdoneidx] = NULL; - card->txbd_ring[wrdoneidx]->paddr = 0; - card->txbd_ring[wrdoneidx]->len = 0; - card->txbd_ring[wrdoneidx]->flags = 0; + desc = card->txbd_ring[wrdoneidx]; + memset(desc, 0, sizeof(*desc)); card->txbd_rdptr++; if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) @@ -964,6 +963,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, u32 wrindx; int ret; dma_addr_t buf_pa; + struct mwifiex_pcie_buf_desc *desc; __le16 *tmp; if (!(skb->data && skb->len)) { @@ -994,10 +994,11 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, wrindx = card->txbd_wrptr & reg->tx_mask; MWIFIEX_SKB_PACB(skb, &buf_pa); card->tx_buf_list[wrindx] = skb; - card->txbd_ring[wrindx]->paddr = buf_pa; - card->txbd_ring[wrindx]->len = (u16)skb->len; - card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | - MWIFIEX_BD_FLAG_LAST_DESC; + desc = card->txbd_ring[wrindx]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | + MWIFIEX_BD_FLAG_LAST_DESC; if ((++card->txbd_wrptr & reg->tx_mask) == MWIFIEX_MAX_TXRX_BD) @@ -1049,9 +1050,7 @@ done_unmap: MWIFIEX_SKB_PACB(skb, &buf_pa); pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE); card->tx_buf_list[wrindx] = NULL; - card->txbd_ring[wrindx]->paddr = 0; - card->txbd_ring[wrindx]->len = 0; - card->txbd_ring[wrindx]->flags = 0; + memset(desc, 0, sizeof(*desc)); return ret; } @@ -1067,6 +1066,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) dma_addr_t buf_pa; int ret = 0; struct sk_buff *skb_tmp = NULL; + struct mwifiex_pcie_buf_desc *desc; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -1126,9 +1126,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", skb_tmp, rd_index); card->rx_buf_list[rd_index] = skb_tmp; - card->rxbd_ring[rd_index]->paddr = buf_pa; - card->rxbd_ring[rd_index]->len = skb_tmp->len; - card->rxbd_ring[rd_index]->flags = 0; + desc = card->rxbd_ring[rd_index]; + desc->paddr = buf_pa; + desc->len = skb_tmp->len; + desc->flags = 0; if ((++card->rxbd_rdptr & reg->rx_mask) == MWIFIEX_MAX_TXRX_BD) { @@ -1471,6 +1472,7 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr, event; dma_addr_t buf_pa; + struct mwifiex_evt_buf_desc *desc; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -1512,9 +1514,8 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) /* Take the pointer and set it to event pointer in adapter and will return back after event handling callback */ card->evt_buf_list[rdptr] = NULL; - card->evtbd_ring[rdptr]->paddr = 0; - card->evtbd_ring[rdptr]->len = 0; - card->evtbd_ring[rdptr]->flags = 0; + desc = card->evtbd_ring[rdptr]; + memset(desc, 0, sizeof(*desc)); event = *(u32 *) &skb_cmd->data[INTF_HEADER_LEN]; adapter->event_cause = event; @@ -1555,6 +1556,7 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr; dma_addr_t buf_pa; + struct mwifiex_evt_buf_desc *desc; if (!skb) return 0; @@ -1581,9 +1583,10 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, MWIFIEX_SKB_PACB(skb, &buf_pa); card->evt_buf_list[rdptr] = skb; MWIFIEX_SKB_PACB(skb, &buf_pa); - card->evtbd_ring[rdptr]->paddr = buf_pa; - card->evtbd_ring[rdptr]->len = (u16)skb->len; - card->evtbd_ring[rdptr]->flags = 0; + desc = card->evtbd_ring[rdptr]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; skb = NULL; } else { dev_dbg(adapter->dev, diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 7ef660e..7ebdc74 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -155,6 +155,12 @@ static const struct mwifiex_pcie_device mwifiex_pcie8766 = { .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, }; +struct mwifiex_evt_buf_desc { + u64 paddr; + u16 len; + u16 flags; +} __packed; + struct mwifiex_pcie_buf_desc { u64 paddr; u16 len; @@ -172,7 +178,7 @@ struct pcie_service_card { u32 txbd_ring_size; u8 *txbd_ring_vbase; dma_addr_t txbd_ring_pbase; - struct mwifiex_pcie_buf_desc *txbd_ring[MWIFIEX_MAX_TXRX_BD]; + void *txbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *tx_buf_list[MWIFIEX_MAX_TXRX_BD]; u32 rxbd_wrptr; @@ -180,7 +186,7 @@ struct pcie_service_card { u32 rxbd_ring_size; u8 *rxbd_ring_vbase; dma_addr_t rxbd_ring_pbase; - struct mwifiex_pcie_buf_desc *rxbd_ring[MWIFIEX_MAX_TXRX_BD]; + void *rxbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *rx_buf_list[MWIFIEX_MAX_TXRX_BD]; u32 evtbd_wrptr; @@ -188,7 +194,7 @@ struct pcie_service_card { u32 evtbd_ring_size; u8 *evtbd_ring_vbase; dma_addr_t evtbd_ring_pbase; - struct mwifiex_pcie_buf_desc *evtbd_ring[MWIFIEX_MAX_EVT_BD]; + void *evtbd_ring[MWIFIEX_MAX_EVT_BD]; struct sk_buff *evt_buf_list[MWIFIEX_MAX_EVT_BD]; struct sk_buff *cmd_buf; -- cgit v0.10.2 From ca8f21127883f8c1ea48b9ce8f93ead2175142a7 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:09 -0800 Subject: mwifiex: add PCIe8897 support This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: Bing Zhao Signed-off-by: Frank Huang Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig index b2e2772..4f614aa 100644 --- a/drivers/net/wireless/mwifiex/Kconfig +++ b/drivers/net/wireless/mwifiex/Kconfig @@ -20,12 +20,12 @@ config MWIFIEX_SDIO mwifiex_sdio. config MWIFIEX_PCIE - tristate "Marvell WiFi-Ex Driver for PCIE 8766" + tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897" depends on MWIFIEX && PCI select FW_LOADER ---help--- This adds support for wireless adapters based on Marvell - 8766 chipset with PCIe interface. + 8766/8897 chipsets with PCIe interface. If you choose to build it as a module, it will be called mwifiex_pcie. diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 6c15969..3b9be7c 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -237,15 +237,17 @@ static int mwifiex_pcie_resume(struct pci_dev *pdev) return 0; } -#define PCIE_VENDOR_ID_MARVELL (0x11ab) -#define PCIE_DEVICE_ID_MARVELL_88W8766P (0x2b30) - static DEFINE_PCI_DEVICE_TABLE(mwifiex_ids) = { { PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, .driver_data = (unsigned long) &mwifiex_pcie8766, }, + { + PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8897, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + .driver_data = (unsigned long) &mwifiex_pcie8897, + }, {}, }; @@ -377,15 +379,24 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { card->tx_buf_list[i] = NULL; - card->txbd_ring[i] = (void *)(card->txbd_ring_vbase + - (sizeof(*desc) * i)); - desc = card->txbd_ring[i]; - memset(desc, 0, sizeof(*desc)); + if (reg->pfu_enabled) { + card->txbd_ring[i] = (void *)card->txbd_ring_vbase + + (sizeof(*desc2) * i); + desc2 = card->txbd_ring[i]; + memset(desc2, 0, sizeof(*desc2)); + } else { + card->txbd_ring[i] = (void *)card->txbd_ring_vbase + + (sizeof(*desc) * i); + desc = card->txbd_ring[i]; + memset(desc, 0, sizeof(*desc)); + } } return 0; @@ -398,8 +409,10 @@ static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; dma_addr_t buf_pa; int i; @@ -426,12 +439,23 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) (u32)((u64)buf_pa >> 32)); card->rx_buf_list[i] = skb; - card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + - (sizeof(*desc) * i)); - desc = card->rxbd_ring[i]; - desc->paddr = buf_pa; - desc->len = (u16)skb->len; - desc->flags = 0; + if (reg->pfu_enabled) { + card->rxbd_ring[i] = (void *)card->rxbd_ring_vbase + + (sizeof(*desc2) * i); + desc2 = card->rxbd_ring[i]; + desc2->paddr = buf_pa; + desc2->len = (u16)skb->len; + desc2->frag_len = (u16)skb->len; + desc2->flags = reg->ring_flag_eop | reg->ring_flag_sop; + desc2->offset = 0; + } else { + card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + + (sizeof(*desc) * i)); + desc = card->rxbd_ring[i]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; + } } return 0; @@ -489,20 +513,33 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - desc = card->txbd_ring[i]; - if (card->tx_buf_list[i]) { - skb = card->tx_buf_list[i]; - pci_unmap_single(card->dev, desc->paddr, skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_any(skb); + if (reg->pfu_enabled) { + desc2 = card->txbd_ring[i]; + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, desc2->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc2, 0, sizeof(*desc2)); + } else { + desc = card->txbd_ring[i]; + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc, 0, sizeof(*desc)); } card->tx_buf_list[i] = NULL; - memset(desc, 0, sizeof(*desc)); } return; @@ -514,20 +551,33 @@ static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - desc = card->rxbd_ring[i]; - if (card->rx_buf_list[i]) { - skb = card->rx_buf_list[i]; - pci_unmap_single(card->dev, desc->paddr, - MWIFIEX_RX_DATA_BUF_SIZE, - PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(skb); + if (reg->pfu_enabled) { + desc2 = card->rxbd_ring[i]; + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, desc2->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc2, 0, sizeof(*desc2)); + } else { + desc = card->rxbd_ring[i]; + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc, 0, sizeof(*desc)); } - memset(desc, 0, sizeof(*desc)); + card->rx_buf_list[i] = NULL; } return; @@ -571,12 +621,21 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->txbd_wrptr = 0; - card->txbd_rdptr |= reg->tx_rollover_ind; + + if (reg->pfu_enabled) + card->txbd_rdptr = 0; + else + card->txbd_rdptr |= reg->tx_rollover_ind; /* allocate shared memory for the BD ring and divide the same in to several descriptors */ - card->txbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * - MWIFIEX_MAX_TXRX_BD; + if (reg->pfu_enabled) + card->txbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + else + card->txbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + dev_dbg(adapter->dev, "info: txbd_ring: Allocating %d bytes\n", card->txbd_ring_size); card->txbd_ring_vbase = pci_alloc_consistent(card->dev, @@ -632,8 +691,13 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) card->rxbd_wrptr = 0; card->rxbd_rdptr = reg->rx_rollover_ind; - card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * - MWIFIEX_MAX_TXRX_BD; + if (reg->pfu_enabled) + card->rxbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + else + card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + dev_dbg(adapter->dev, "info: rxbd_ring: Allocating %d bytes\n", card->rxbd_ring_size); card->rxbd_ring_vbase = pci_alloc_consistent(card->dev, @@ -695,7 +759,8 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_rdptr = reg->evt_rollover_ind; card->evtbd_ring_size = sizeof(struct mwifiex_evt_buf_desc) * - MWIFIEX_MAX_EVT_BD; + MWIFIEX_MAX_EVT_BD; + dev_dbg(adapter->dev, "info: evtbd_ring: Allocating %d bytes\n", card->evtbd_ring_size); card->evtbd_ring_vbase = pci_alloc_consistent(card->dev, @@ -875,11 +940,11 @@ static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) */ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) { - const u32 num_tx_buffs = MWIFIEX_MAX_TXRX_BD; struct sk_buff *skb; dma_addr_t buf_pa; - u32 wrdoneidx, rdptr, unmap_count = 0; + u32 wrdoneidx, rdptr, num_tx_buffs, unmap_count = 0; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; @@ -896,12 +961,14 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) dev_dbg(adapter->dev, "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n", card->txbd_rdptr, rdptr); + num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr; /* free from previous txbd_rdptr to current txbd_rdptr */ while (((card->txbd_rdptr & reg->tx_mask) != (rdptr & reg->tx_mask)) || ((card->txbd_rdptr & reg->tx_rollover_ind) != (rdptr & reg->tx_rollover_ind))) { - wrdoneidx = card->txbd_rdptr & reg->tx_mask; + wrdoneidx = (card->txbd_rdptr & reg->tx_mask) >> + reg->tx_start_ptr; skb = card->tx_buf_list[wrdoneidx]; if (skb) { @@ -922,9 +989,23 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) } card->tx_buf_list[wrdoneidx] = NULL; - desc = card->txbd_ring[wrdoneidx]; - memset(desc, 0, sizeof(*desc)); - card->txbd_rdptr++; + + if (reg->pfu_enabled) { + desc2 = (void *)card->txbd_ring[wrdoneidx]; + memset(desc2, 0, sizeof(*desc2)); + } else { + desc = card->txbd_ring[wrdoneidx]; + memset(desc, 0, sizeof(*desc)); + } + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + card->txbd_rdptr++; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + card->txbd_rdptr += reg->ring_tx_start_ptr; + break; + } + if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) card->txbd_rdptr = ((card->txbd_rdptr & @@ -960,10 +1041,11 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - u32 wrindx; + u32 wrindx, num_tx_buffs, rx_val; int ret; dma_addr_t buf_pa; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; __le16 *tmp; if (!(skb->data && skb->len)) { @@ -975,6 +1057,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); + num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr; dev_dbg(adapter->dev, "info: SEND DATA: \n", card->txbd_rdptr, card->txbd_wrptr); if (mwifiex_pcie_txbd_not_full(card)) { @@ -991,24 +1074,44 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, PCI_DMA_TODEVICE)) return -1; - wrindx = card->txbd_wrptr & reg->tx_mask; + wrindx = (card->txbd_wrptr & reg->tx_mask) >> reg->tx_start_ptr; MWIFIEX_SKB_PACB(skb, &buf_pa); card->tx_buf_list[wrindx] = skb; - desc = card->txbd_ring[wrindx]; - desc->paddr = buf_pa; - desc->len = (u16)skb->len; - desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | - MWIFIEX_BD_FLAG_LAST_DESC; - if ((++card->txbd_wrptr & reg->tx_mask) == - MWIFIEX_MAX_TXRX_BD) + if (reg->pfu_enabled) { + desc2 = (void *)card->txbd_ring[wrindx]; + desc2->paddr = buf_pa; + desc2->len = (u16)skb->len; + desc2->frag_len = (u16)skb->len; + desc2->offset = 0; + desc2->flags = MWIFIEX_BD_FLAG_FIRST_DESC | + MWIFIEX_BD_FLAG_LAST_DESC; + } else { + desc = card->txbd_ring[wrindx]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | + MWIFIEX_BD_FLAG_LAST_DESC; + } + + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + card->txbd_wrptr++; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + card->txbd_wrptr += reg->ring_tx_start_ptr; + break; + } + + if ((card->txbd_wrptr & reg->tx_mask) == num_tx_buffs) card->txbd_wrptr = ((card->txbd_wrptr & reg->tx_rollover_ind) ^ reg->tx_rollover_ind); + rx_val = card->rxbd_rdptr & reg->rx_wrap_mask; /* Write the TX ring write pointer in to reg->tx_wrptr */ if (mwifiex_write_reg(adapter, reg->tx_wrptr, - card->txbd_wrptr)) { + card->txbd_wrptr | rx_val)) { dev_err(adapter->dev, "SEND DATA: failed to write reg->tx_wrptr\n"); ret = -1; @@ -1050,7 +1153,11 @@ done_unmap: MWIFIEX_SKB_PACB(skb, &buf_pa); pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE); card->tx_buf_list[wrindx] = NULL; - memset(desc, 0, sizeof(*desc)); + if (reg->pfu_enabled) + memset(desc2, 0, sizeof(*desc2)); + else + memset(desc, 0, sizeof(*desc)); + return ret; } @@ -1062,11 +1169,12 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - u32 wrptr, rd_index; + u32 wrptr, rd_index, tx_val; dma_addr_t buf_pa; int ret = 0; struct sk_buff *skb_tmp = NULL; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -1126,10 +1234,20 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", skb_tmp, rd_index); card->rx_buf_list[rd_index] = skb_tmp; - desc = card->rxbd_ring[rd_index]; - desc->paddr = buf_pa; - desc->len = skb_tmp->len; - desc->flags = 0; + + if (reg->pfu_enabled) { + desc2 = (void *)card->rxbd_ring[rd_index]; + desc2->paddr = buf_pa; + desc2->len = skb_tmp->len; + desc2->frag_len = skb_tmp->len; + desc2->offset = 0; + desc2->flags = reg->ring_flag_sop | reg->ring_flag_eop; + } else { + desc = card->rxbd_ring[rd_index]; + desc->paddr = buf_pa; + desc->len = skb_tmp->len; + desc->flags = 0; + } if ((++card->rxbd_rdptr & reg->rx_mask) == MWIFIEX_MAX_TXRX_BD) { @@ -1140,9 +1258,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) dev_dbg(adapter->dev, "info: RECV DATA: \n", card->rxbd_rdptr, wrptr); + tx_val = card->txbd_wrptr & reg->tx_wrap_mask; /* Write the RX ring read pointer in to reg->rx_rdptr */ if (mwifiex_write_reg(adapter, reg->rx_rdptr, - card->rxbd_rdptr)) { + card->rxbd_rdptr | tx_val)) { dev_err(adapter->dev, "RECV DATA: failed to write reg->rx_rdptr\n"); ret = -1; @@ -1242,9 +1361,11 @@ static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + int tx_wrap = card->txbd_wrptr & reg->tx_wrap_mask; /* Write the RX ring read pointer in to reg->rx_rdptr */ - if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr)) { + if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr | + tx_wrap)) { dev_err(adapter->dev, "RECV DATA: failed to write reg->rx_rdptr\n"); return -1; @@ -2259,7 +2380,7 @@ static int mwifiex_pcie_init_module(void) { int ret; - pr_debug("Marvell 8766 PCIe Driver\n"); + pr_debug("Marvell PCIe Driver\n"); sema_init(&add_remove_card_sem, 1); @@ -2302,4 +2423,5 @@ MODULE_AUTHOR("Marvell International Ltd."); MODULE_DESCRIPTION("Marvell WiFi-Ex PCI-Express Driver version " PCIE_VERSION); MODULE_VERSION(PCIE_VERSION); MODULE_LICENSE("GPL v2"); -MODULE_FIRMWARE("mrvl/pcie8766_uapsta.bin"); +MODULE_FIRMWARE(PCIE8766_DEFAULT_FW_NAME); +MODULE_FIRMWARE(PCIE8897_DEFAULT_FW_NAME); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 7ebdc74..6080615 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -29,6 +29,11 @@ #include "main.h" #define PCIE8766_DEFAULT_FW_NAME "mrvl/pcie8766_uapsta.bin" +#define PCIE8897_DEFAULT_FW_NAME "mrvl/pcie8897_uapsta.bin" + +#define PCIE_VENDOR_ID_MARVELL (0x11ab) +#define PCIE_DEVICE_ID_MARVELL_88W8766P (0x2b30) +#define PCIE_DEVICE_ID_MARVELL_88W8897 (0x2b38) /* Constants for Buffer Descriptor (BD) rings */ #define MWIFIEX_MAX_TXRX_BD 0x20 @@ -57,6 +62,8 @@ #define PCIE_SCRATCH_10_REG 0xCE8 #define PCIE_SCRATCH_11_REG 0xCEC #define PCIE_SCRATCH_12_REG 0xCF0 +#define PCIE_RD_DATA_PTR_Q0_Q1 0xC08C +#define PCIE_WR_DATA_PTR_Q0_Q1 0xC05C #define CPU_INTR_DNLD_RDY BIT(0) #define CPU_INTR_DOOR_BELL BIT(1) @@ -75,6 +82,14 @@ #define MWIFIEX_BD_FLAG_ROLLOVER_IND BIT(7) #define MWIFIEX_BD_FLAG_FIRST_DESC BIT(0) #define MWIFIEX_BD_FLAG_LAST_DESC BIT(1) +#define MWIFIEX_BD_FLAG_SOP BIT(0) +#define MWIFIEX_BD_FLAG_EOP BIT(1) +#define MWIFIEX_BD_FLAG_XS_SOP BIT(2) +#define MWIFIEX_BD_FLAG_XS_EOP BIT(3) +#define MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND BIT(7) +#define MWIFIEX_BD_FLAG_RX_ROLLOVER_IND BIT(10) +#define MWIFIEX_BD_FLAG_TX_START_PTR BIT(16) +#define MWIFIEX_BD_FLAG_TX_ROLLOVER_IND BIT(26) /* Max retry number of command write */ #define MAX_WRITE_IOMEM_RETRY 2 @@ -143,6 +158,36 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { .pfu_enabled = 0, }; +static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { + .cmd_addr_lo = PCIE_SCRATCH_0_REG, + .cmd_addr_hi = PCIE_SCRATCH_1_REG, + .cmd_size = PCIE_SCRATCH_2_REG, + .fw_status = PCIE_SCRATCH_3_REG, + .cmdrsp_addr_lo = PCIE_SCRATCH_4_REG, + .cmdrsp_addr_hi = PCIE_SCRATCH_5_REG, + .tx_rdptr = PCIE_RD_DATA_PTR_Q0_Q1, + .tx_wrptr = PCIE_WR_DATA_PTR_Q0_Q1, + .rx_rdptr = PCIE_WR_DATA_PTR_Q0_Q1, + .rx_wrptr = PCIE_RD_DATA_PTR_Q0_Q1, + .evt_rdptr = PCIE_SCRATCH_10_REG, + .evt_wrptr = PCIE_SCRATCH_11_REG, + .drv_rdy = PCIE_SCRATCH_12_REG, + .tx_start_ptr = 16, + .tx_mask = 0x03FF0000, + .tx_wrap_mask = 0x07FF0000, + .rx_mask = 0x000003FF, + .rx_wrap_mask = 0x000007FF, + .tx_rollover_ind = MWIFIEX_BD_FLAG_TX_ROLLOVER_IND, + .rx_rollover_ind = MWIFIEX_BD_FLAG_RX_ROLLOVER_IND, + .evt_rollover_ind = MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND, + .ring_flag_sop = MWIFIEX_BD_FLAG_SOP, + .ring_flag_eop = MWIFIEX_BD_FLAG_EOP, + .ring_flag_xs_sop = MWIFIEX_BD_FLAG_XS_SOP, + .ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP, + .ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR, + .pfu_enabled = 1, +}; + struct mwifiex_pcie_device { const char *firmware; const struct mwifiex_pcie_card_reg *reg; @@ -155,6 +200,12 @@ static const struct mwifiex_pcie_device mwifiex_pcie8766 = { .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, }; +static const struct mwifiex_pcie_device mwifiex_pcie8897 = { + .firmware = PCIE8897_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_8897, + .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, +}; + struct mwifiex_evt_buf_desc { u64 paddr; u16 len; @@ -167,6 +218,15 @@ struct mwifiex_pcie_buf_desc { u16 flags; } __packed; +struct mwifiex_pfu_buf_desc { + u16 flags; + u16 offset; + u16 frag_len; + u16 len; + u64 paddr; + u32 reserved; +} __packed; + struct pcie_service_card { struct pci_dev *dev; struct mwifiex_adapter *adapter; @@ -210,10 +270,22 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) { const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - if (((card->txbd_wrptr & reg->tx_mask) == (rdptr & reg->tx_mask)) && - ((card->txbd_wrptr & reg->tx_rollover_ind) != + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + if (((card->txbd_wrptr & reg->tx_mask) == + (rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (rdptr & reg->tx_rollover_ind))) + return 1; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + if (((card->txbd_wrptr & reg->tx_mask) == + (rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) == (rdptr & reg->tx_rollover_ind))) - return 1; + return 1; + break; + } return 0; } @@ -223,11 +295,22 @@ mwifiex_pcie_txbd_not_full(struct pcie_service_card *card) { const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - if (((card->txbd_wrptr & reg->tx_mask) != - (card->txbd_rdptr & reg->tx_mask)) || - ((card->txbd_wrptr & reg->tx_rollover_ind) != - (card->txbd_rdptr & reg->tx_rollover_ind))) - return 1; + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + if (((card->txbd_wrptr & reg->tx_mask) != + (card->txbd_rdptr & reg->tx_mask)) || + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (card->txbd_rdptr & reg->tx_rollover_ind))) + return 1; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + if (((card->txbd_wrptr & reg->tx_mask) != + (card->txbd_rdptr & reg->tx_mask)) || + ((card->txbd_wrptr & reg->tx_rollover_ind) == + (card->txbd_rdptr & reg->tx_rollover_ind))) + return 1; + break; + } return 0; } -- cgit v0.10.2 From d9d76a045f2883f2e6cf00a43cb79b2e5a8db323 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sat, 9 Feb 2013 04:14:35 +0100 Subject: wireless: rt2x00: rt2800usb add "unknown" devices 0x06f8, 0xe036 Hercules Wireless Dual Band 600 USB Key HWNUm-600 0x0b05, 0x17a7 ASUS USB-N10H 150Mbps 11n Wireless USB dongle 0x0df6, 0x0069 Sitecom Wireless Dualband Network Adapter 300N X5 WLA-5000 0x0df6, 0x006f Sitecom WiFi USB adapter N600 WLA-5100 0x13d3, 0x3340 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3399 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3400 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3401 AzureWave 802.11n USB Wireless LAN Card 0x1740, 0x0600 EnGenius Dual-Band Wireless Media Adapter 0x1740, 0x0602 EnGenius 802.11 a/b/g/n Wireless USB Adapter 0x177f, 0x0254 Sweex LW054 Wireless 54G Adapter USB 0xf201, 0x5370 TP-LINK 54Mbps Wireless USB Adapter no RF3053, and I believe no RT5572. Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 8a57646..098613e 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1219,10 +1219,15 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0b05, 0x1760) }, { USB_DEVICE(0x0b05, 0x1761) }, { USB_DEVICE(0x0b05, 0x1790) }, + { USB_DEVICE(0x0b05, 0x17a7) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262) }, { USB_DEVICE(0x13d3, 0x3284) }, { USB_DEVICE(0x13d3, 0x3322) }, + { USB_DEVICE(0x13d3, 0x3340) }, + { USB_DEVICE(0x13d3, 0x3399) }, + { USB_DEVICE(0x13d3, 0x3400) }, + { USB_DEVICE(0x13d3, 0x3401) }, /* Belkin */ { USB_DEVICE(0x050d, 0x1003) }, /* Buffalo */ @@ -1237,10 +1242,15 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c0b) }, /* Encore */ { USB_DEVICE(0x203d, 0x14a1) }, + /* EnGenius */ + { USB_DEVICE(0x1740, 0x0600) }, + { USB_DEVICE(0x1740, 0x0602) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0010) }, /* Gigabyte */ { USB_DEVICE(0x1044, 0x800c) }, + /* Hercules */ + { USB_DEVICE(0x06f8, 0xe036) }, /* Huawei */ { USB_DEVICE(0x148f, 0xf101) }, /* I-O DATA */ @@ -1267,11 +1277,17 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0df6, 0x004a) }, { USB_DEVICE(0x0df6, 0x004d) }, { USB_DEVICE(0x0df6, 0x0053) }, + { USB_DEVICE(0x0df6, 0x0069) }, + { USB_DEVICE(0x0df6, 0x006f) }, /* SMC */ { USB_DEVICE(0x083a, 0xa512) }, { USB_DEVICE(0x083a, 0xc522) }, { USB_DEVICE(0x083a, 0xd522) }, { USB_DEVICE(0x083a, 0xf511) }, + /* Sweex */ + { USB_DEVICE(0x177f, 0x0254) }, + /* TP-LINK */ + { USB_DEVICE(0xf201, 0x5370) }, #endif { 0, } }; -- cgit v0.10.2 From f1045f5e1f4f7d94f4e3a9600e3a3c3eec2650ec Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 11 Feb 2013 10:21:18 +0200 Subject: wlcore: remove newly introduced alloc/OOM messages In commit 0d2e7a5c (wireless: Remove unnecessary alloc/OOM messages, alloc cleanups) OOM messages after alloc were removed from the wlcore modules. Commit afb43e6d (wlcore: remove if_ops from platform_data) reintroduced a couple of those. This patch removes them. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 198028d..29ef249 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -229,10 +229,8 @@ static int wl1271_probe(struct sdio_func *func, return -ENODEV; pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); - if (!pdev_data) { - dev_err(&func->dev, "can't allocate platdev_data\n"); + if (!pdev_data) goto out; - } pdev_data->if_ops = &sdio_ops; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 5ad2e10..e264478 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -332,10 +332,8 @@ static int wl1271_probe(struct spi_device *spi) int ret = -ENOMEM; pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); - if (!pdev_data) { - dev_err(&spi->dev, "can't allocate platdev_data\n"); + if (!pdev_data) goto out; - } pdev_data->pdata = spi->dev.platform_data; if (!pdev_data->pdata) { -- cgit v0.10.2 From 8457703f1e86aaf0f134402dd1e09e1f13e65222 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 5 Feb 2013 11:44:48 +0200 Subject: ath6kl: provide 64-bit per-station byte counters Internally, 64-bit byte counters maintained for per-station statistics. Tell to the netlink that full 64-bit value provided Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4225cca..259c433 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1778,14 +1778,14 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev, if (vif->target_stats.rx_byte) { sinfo->rx_bytes = vif->target_stats.rx_byte; - sinfo->filled |= STATION_INFO_RX_BYTES; + sinfo->filled |= STATION_INFO_RX_BYTES64; sinfo->rx_packets = vif->target_stats.rx_pkt; sinfo->filled |= STATION_INFO_RX_PACKETS; } if (vif->target_stats.tx_byte) { sinfo->tx_bytes = vif->target_stats.tx_byte; - sinfo->filled |= STATION_INFO_TX_BYTES; + sinfo->filled |= STATION_INFO_TX_BYTES64; sinfo->tx_packets = vif->target_stats.tx_pkt; sinfo->filled |= STATION_INFO_TX_PACKETS; } -- cgit v0.10.2 From 7f4fe17bc2d4fd46598b03bc51281cfa7ef6abf5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Feb 2013 14:36:03 +0100 Subject: mac80211/minstrel_ht: show the number of retries for each rate in debugfs Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c index e788f76..f2b7d26 100644 --- a/net/mac80211/rc80211_minstrel_ht_debugfs.c +++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c @@ -38,8 +38,8 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) file->private_data = ms; p = ms->buf; - p += sprintf(p, "type rate throughput ewma prob this prob " - "this succ/attempt success attempts\n"); + p += sprintf(p, "type rate throughput ewma prob this prob " + "retry this succ/attempt success attempts\n"); for (i = 0; i < MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; i++) { char htmode = '2'; char gimode = 'L'; @@ -64,18 +64,19 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; - p += sprintf(p, "MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * + p += sprintf(p, " MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * MCS_GROUP_RATES + j); tp = mr->cur_tp / 10; prob = MINSTREL_TRUNC(mr->cur_prob * 1000); eprob = MINSTREL_TRUNC(mr->probability * 1000); - p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u(%3u) %8llu %8llu\n", + p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " + "%3u %3u(%3u) %8llu %8llu\n", tp / 10, tp % 10, eprob / 10, eprob % 10, prob / 10, prob % 10, + mr->retry_count, mr->last_success, mr->last_attempts, (unsigned long long)mr->succ_hist, -- cgit v0.10.2 From df15a6c4fa7f77511663d7b5f9134f37ad2e8c92 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Feb 2013 14:36:04 +0100 Subject: mac80211/minstrel_ht: remove the sampling bypass check for the lowest rate It's more of an unnecessary micro-optimization and it prevents switching from long-GI to short-GI in HT20/single-stream for the lowest rate Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 9f9c453..5bb316a 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -231,10 +231,6 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) if (!mr->cur_tp) continue; - /* ignore the lowest rate of each single-stream group */ - if (!i && minstrel_mcs_groups[group].streams == 1) - continue; - if ((mr->cur_tp > cur_prob_tp && mr->probability > MINSTREL_FRAC(3, 4)) || mr->probability > cur_prob) { mg->max_prob_rate = index; -- cgit v0.10.2 From 6c17b77b67587b9f9e3070fb89fe98cef3187131 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 11 Feb 2013 11:21:07 -0600 Subject: mac80211: Fix tx queue handling during scans Scans currently work by stopping the netdev tx queues but leaving the mac80211 queues active. This stops the flow of incoming packets while still allowing mac80211 to transmit nullfunc and probe request frames to facilitate scanning. However, the driver may try to wake the mac80211 queues while in this state, which will also wake the netdev queues. To prevent this, add a new queue stop reason, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, to be used when stopping the tx queues for off-channel operation. This prevents the netdev queues from waking when a driver wakes the mac80211 queues. This also stops all frames from being transmitted, even those meant to be sent off-channel. Add a new tx control flag, IEEE80211_TX_CTL_OFFCHAN_TX_OK, which allows frames to be transmitted when the queues are stopped only for the off-channel stop reason. Update all locations transmitting off-channel frames to use this flag. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 86ad2c3..0eaa909 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -399,6 +399,9 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be * set by rate control algorithms to indicate probe rate, will * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate + * that a frame can be transmitted while the queues are stopped for + * off-channel operation. * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. @@ -464,6 +467,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_AMPDU = BIT(10), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + IEEE80211_TX_INTFL_OFFCHAN_TX_OK = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8f6b593..e3dec80 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2749,7 +2749,8 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, goto out_unlock; } - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) IEEE80211_SKB_CB(skb)->hw_queue = local->hw.offchannel_tx_hw_queue; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5635dfc..76cdcfc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -809,6 +809,7 @@ enum queue_stop_reason { IEEE80211_QUEUE_STOP_REASON_AGGREGATION, IEEE80211_QUEUE_STOP_REASON_SUSPEND, IEEE80211_QUEUE_STOP_REASON_SKB_ADD, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, }; #ifdef CONFIG_MAC80211_LEDS diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 76cacdb..efb2276 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -685,7 +685,8 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local, if (powersave) nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | IEEE80211_STA_CONNECTION_POLL)) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 82baf5b..4c3ee3e 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -113,6 +113,10 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) * notify the AP about us leaving the channel and stop all * STA interfaces. */ + + ieee80211_stop_queues_by_reason(&local->hw, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); + mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) @@ -133,12 +137,9 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) sdata, BSS_CHANGED_BEACON_ENABLED); } - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { - netif_tx_stop_all_queues(sdata->dev); - if (sdata->vif.type == NL80211_IFTYPE_STATION && - sdata->u.mgd.associated) - ieee80211_offchannel_ps_enable(sdata); - } + if (sdata->vif.type == NL80211_IFTYPE_STATION && + sdata->u.mgd.associated) + ieee80211_offchannel_ps_enable(sdata); } mutex_unlock(&local->iflist_mtx); } @@ -166,20 +167,6 @@ void ieee80211_offchannel_return(struct ieee80211_local *local) sdata->u.mgd.associated) ieee80211_offchannel_ps_disable(sdata); - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { - /* - * This may wake up queues even though the driver - * currently has them stopped. This is not very - * likely, since the driver won't have gotten any - * (or hardly any) new packets while we weren't - * on the right channel, and even if it happens - * it will at most lead to queueing up one more - * packet per queue in mac80211 rather than on - * the interface qdisc. - */ - netif_tx_wake_all_queues(sdata->dev); - } - if (test_and_clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state)) { sdata->vif.bss_conf.enable_beacon = true; @@ -188,6 +175,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local) } } mutex_unlock(&local->iflist_mtx); + + ieee80211_wake_queues_by_reason(&local->hw, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); } void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index edd47d9..d9e2df9 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -382,6 +382,11 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, int i; struct ieee80211_sub_if_data *sdata; enum ieee80211_band band = local->hw.conf.channel->band; + u32 tx_flags; + + tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK; + if (local->scan_req->no_cck) + tx_flags |= IEEE80211_TX_CTL_NO_CCK_RATE; sdata = rcu_dereference_protected(local->scan_sdata, lockdep_is_held(&local->mtx)); @@ -393,9 +398,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck ? - IEEE80211_TX_CTL_NO_CCK_RATE : 0, - local->hw.conf.channel, true); + tx_flags, local->hw.conf.channel, true); /* * After sending probe requests, wait for probe responses diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2ef0e19b..f476aa6 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1230,6 +1230,21 @@ static bool ieee80211_tx_frags(struct ieee80211_local *local, spin_lock_irqsave(&local->queue_stop_reason_lock, flags); if (local->queue_stop_reasons[q] || (!txpending && !skb_queue_empty(&local->pending[q]))) { + if (unlikely(info->flags & + IEEE80211_TX_INTFL_OFFCHAN_TX_OK && + local->queue_stop_reasons[q] & + ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL))) { + /* + * Drop off-channel frames if queues are stopped + * for any reason other than off-channel + * operation. Never queue them. + */ + spin_unlock_irqrestore( + &local->queue_stop_reason_lock, flags); + ieee80211_purge_tx_queue(&local->hw, skbs); + return true; + } + /* * Since queue is stopped, queue up frames for later * transmission from the tx-pending tasklet when the -- cgit v0.10.2 From 9c35d7d2368f54313b988a01c408e5cf863ffd9e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 11 Feb 2013 11:21:08 -0600 Subject: mac80211: Add flushes before going off-channel We've got a couple of races when enabling powersave with an AP for off-channel operation. The first is fairly simple. If we go off-channel before the nullfunc frame to enable PS is transmitted then it may not be received by the AP. Add a flush after enabling off-channel PS to prevent this from happening. The second race is a bit more subtle. If the driver supports QoS and has frames queued when the nullfunc frame is queued, those frames may get transmitted after the nullfunc frame. If PM is not set then the AP is being told that we've exited PS before we go off-channel and may try to deliver frames. To prevent this, add a flush after stopping the queues but before passing the nullfunc frame to the driver. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 4c3ee3e..cc79b4a 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -114,8 +114,13 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) * STA interfaces. */ + /* + * Stop queues and transmit all frames queued by the driver + * before sending nullfunc to enable powersave at the AP. + */ ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); + drv_flush(local, false); mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d9e2df9..6d0b89e 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -334,6 +334,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) ieee80211_offchannel_stop_vifs(local); + /* ensure nullfunc is transmitted before leaving operating channel */ + drv_flush(local, false); + ieee80211_configure_filter(local); /* We need to set power level at maximum rate for scanning. */ -- cgit v0.10.2 From f05de73bf82fbbc00265c06d12efb7273f7dc54a Mon Sep 17 00:00:00 2001 From: Jean Sacren Date: Mon, 11 Feb 2013 13:30:38 +0000 Subject: skbuff: create skb_panic() function and its wrappers Create skb_panic() function in lieu of both skb_over_panic() and skb_under_panic() so that code duplication would be avoided. Update type and variable name where necessary. Jiri Pirko suggested using wrappers so that we would be able to keep the fruits of the original code. Signed-off-by: Jean Sacren Cc: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 6114c11..8731c39 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -104,47 +104,37 @@ static const struct pipe_buf_operations sock_pipe_buf_ops = { .get = sock_pipe_buf_get, }; -/* - * Keep out-of-line to prevent kernel bloat. - * __builtin_return_address is not used because it is not always - * reliable. - */ - /** - * skb_over_panic - private function - * @skb: buffer - * @sz: size - * @here: address - * - * Out of line support code for skb_put(). Not user callable. + * skb_panic - private function for out-of-line support + * @skb: buffer + * @sz: size + * @addr: address + * @panic: skb_over_panic or skb_under_panic + * + * Out-of-line support for skb_put() and skb_push(). + * Called via the wrapper skb_over_panic() or skb_under_panic(). + * Keep out of line to prevent kernel bloat. + * __builtin_return_address is not used because it is not always reliable. */ -static void skb_over_panic(struct sk_buff *skb, int sz, void *here) +static void skb_panic(struct sk_buff *skb, unsigned int sz, void *addr, + const char panic[]) { pr_emerg("%s: text:%p len:%d put:%d head:%p data:%p tail:%#lx end:%#lx dev:%s\n", - __func__, here, skb->len, sz, skb->head, skb->data, + panic, addr, skb->len, sz, skb->head, skb->data, (unsigned long)skb->tail, (unsigned long)skb->end, skb->dev ? skb->dev->name : ""); BUG(); } -/** - * skb_under_panic - private function - * @skb: buffer - * @sz: size - * @here: address - * - * Out of line support code for skb_push(). Not user callable. - */ - -static void skb_under_panic(struct sk_buff *skb, int sz, void *here) +static void skb_over_panic(struct sk_buff *skb, unsigned int sz, void *addr) { - pr_emerg("%s: text:%p len:%d put:%d head:%p data:%p tail:%#lx end:%#lx dev:%s\n", - __func__, here, skb->len, sz, skb->head, skb->data, - (unsigned long)skb->tail, (unsigned long)skb->end, - skb->dev ? skb->dev->name : ""); - BUG(); + skb_panic(skb, sz, addr, __func__); } +static void skb_under_panic(struct sk_buff *skb, unsigned int sz, void *addr) +{ + skb_panic(skb, sz, addr, __func__); +} /* * kmalloc_reserve is a wrapper around kmalloc_node_track_caller that tells -- cgit v0.10.2 From 2cde6acd49daca58b96f1fbc697492825511ad31 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 11 Feb 2013 10:25:30 +0000 Subject: netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock __netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is already held. The mechanism is used to asynchronously call __netpoll_cleanup outside of the holding of the rtnl_lock, so as to avoid deadlock. Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the rtnl_lock must be held while calling it. Further, it cannot be held, because rcu callbacks may be issued in softirq contexts, which cannot sleep. Fix this by converting the rcu callback to a work queue that is guaranteed to get scheduled in process context, so that we can hold the rtnl properly while calling __netpoll_cleanup Tested successfully by myself. Signed-off-by: Neil Horman CC: "David S. Miller" CC: Cong Wang CC: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2239937..94c1534 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1249,7 +1249,7 @@ static inline void slave_disable_netpoll(struct slave *slave) return; slave->np = NULL; - __netpoll_free_rcu(np); + __netpoll_free_async(np); } static inline bool slave_dev_support_netpoll(struct net_device *slave_dev) { diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index ab856d5..9d7d8c6 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -32,7 +32,7 @@ struct netpoll { u8 remote_mac[ETH_ALEN]; struct list_head rx; /* rx_np list element */ - struct rcu_head rcu; + struct work_struct cleanup_work; }; struct netpoll_info { @@ -68,7 +68,7 @@ int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); void __netpoll_cleanup(struct netpoll *np); -void __netpoll_free_rcu(struct netpoll *np); +void __netpoll_free_async(struct netpoll *np); void netpoll_cleanup(struct netpoll *np); int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo); void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 34df5b3..19cf81b 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -733,7 +733,7 @@ static void vlan_dev_netpoll_cleanup(struct net_device *dev) vlan->netpoll = NULL; - __netpoll_free_rcu(netpoll); + __netpoll_free_async(netpoll); } #endif /* CONFIG_NET_POLL_CONTROLLER */ diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index ba6fb2d..ca98fa5 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -265,7 +265,7 @@ void br_netpoll_disable(struct net_bridge_port *p) p->np = NULL; - __netpoll_free_rcu(np); + __netpoll_free_async(np); } #endif diff --git a/net/core/netpoll.c b/net/core/netpoll.c index edcd9ad..c536474 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -61,6 +61,7 @@ static struct srcu_struct netpoll_srcu; static void zap_completion_queue(void); static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo); +static void netpoll_async_cleanup(struct work_struct *work); static unsigned int carrier_timeout = 4; module_param(carrier_timeout, uint, 0644); @@ -1020,6 +1021,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp) np->dev = ndev; strlcpy(np->dev_name, ndev->name, IFNAMSIZ); + INIT_WORK(&np->cleanup_work, netpoll_async_cleanup); if ((ndev->priv_flags & IFF_DISABLE_NETPOLL) || !ndev->netdev_ops->ndo_poll_controller) { @@ -1255,25 +1257,27 @@ void __netpoll_cleanup(struct netpoll *np) if (ops->ndo_netpoll_cleanup) ops->ndo_netpoll_cleanup(np->dev); - RCU_INIT_POINTER(np->dev->npinfo, NULL); + rcu_assign_pointer(np->dev->npinfo, NULL); call_rcu_bh(&npinfo->rcu, rcu_cleanup_netpoll_info); } } EXPORT_SYMBOL_GPL(__netpoll_cleanup); -static void rcu_cleanup_netpoll(struct rcu_head *rcu_head) +static void netpoll_async_cleanup(struct work_struct *work) { - struct netpoll *np = container_of(rcu_head, struct netpoll, rcu); + struct netpoll *np = container_of(work, struct netpoll, cleanup_work); + rtnl_lock(); __netpoll_cleanup(np); + rtnl_unlock(); kfree(np); } -void __netpoll_free_rcu(struct netpoll *np) +void __netpoll_free_async(struct netpoll *np) { - call_rcu_bh(&np->rcu, rcu_cleanup_netpoll); + schedule_work(&np->cleanup_work); } -EXPORT_SYMBOL_GPL(__netpoll_free_rcu); +EXPORT_SYMBOL_GPL(__netpoll_free_async); void netpoll_cleanup(struct netpoll *np) { -- cgit v0.10.2 From 0790bbb68f9d483348c1d65381f3dd92602bfd05 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 11 Feb 2013 10:25:31 +0000 Subject: netpoll: cleanup sparse warnings With my recent commit I introduced two sparse warnings. Looking closer there were a few more in the same file, so I fixed them all up. Basic rcu pointer dereferencing suff. I've validated these changes using CONFIG_PROVE_RCU while starting and stopping netconsole repeatedly in bonded and non-bonded configurations Signed-off-by: Neil Horman CC: fengguang.wu@intel.com CC: David Miller CC: eric.dumazet@gmail.com Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index c536474..bcfd4f4 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -206,7 +206,7 @@ static void netpoll_poll_dev(struct net_device *dev) * the dev_open/close paths use this to block netpoll activity * while changing device state */ - if (!mutex_trylock(&dev->npinfo->dev_lock)) + if (!mutex_trylock(&ni->dev_lock)) return; if (!dev || !netif_running(dev)) @@ -221,7 +221,7 @@ static void netpoll_poll_dev(struct net_device *dev) poll_napi(dev); - mutex_unlock(&dev->npinfo->dev_lock); + mutex_unlock(&ni->dev_lock); if (dev->flags & IFF_SLAVE) { if (ni) { @@ -1056,7 +1056,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp) goto free_npinfo; } } else { - npinfo = ndev->npinfo; + npinfo = rtnl_dereference(ndev->npinfo); atomic_inc(&npinfo->refcnt); } @@ -1236,7 +1236,11 @@ void __netpoll_cleanup(struct netpoll *np) struct netpoll_info *npinfo; unsigned long flags; - npinfo = np->dev->npinfo; + /* rtnl_dereference would be preferable here but + * rcu_cleanup_netpoll path can put us in here safely without + * holding the rtnl, so plain rcu_dereference it is + */ + npinfo = rtnl_dereference(np->dev->npinfo); if (!npinfo) return; -- cgit v0.10.2 From b6a7bceb3b9315478657bc55884dfdcd104c9864 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Mon, 11 Feb 2013 23:56:40 -0800 Subject: nl80211: minor correction in sample wowlan mask calculation The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") should be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01", not "0xed,0x07". mask_len = (pat_len + 7) / 8 = (12 + 7) / 8 = 2 Hence the mask will be of 2 bytes. Replace each valid byte in pattern by 1 and don't care byte by 0: 10110111 1000 (0000) 1st byte of pattern corresponds to lower order bit in first byte of mask. And 9th byte of pattern corresponds to lower order bit in second byte of mask. With this logic the mask will be 11101101 00000001 = 0xed 0x01 Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9a2ecdc..b233211 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2906,7 +2906,7 @@ enum nl80211_tx_power_setting { * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. -- cgit v0.10.2 From 66d575705154525c33ab99b5f9ac2d246c348db6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 15:55:20 +0200 Subject: mac80211: allow driver to be stateless wrt. SMSP requests Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 61ac7c4..9e7560b 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -406,6 +406,9 @@ void ieee80211_request_smps(struct ieee80211_vif *vif, if (WARN_ON(smps_mode == IEEE80211_SMPS_OFF)) smps_mode = IEEE80211_SMPS_AUTOMATIC; + if (sdata->u.mgd.driver_smps_mode == smps_mode) + return; + sdata->u.mgd.driver_smps_mode = smps_mode; ieee80211_queue_work(&sdata->local->hw, -- cgit v0.10.2 From 5360cfb2bcbdd7a906cf290036bd406985973e88 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 11 Feb 2013 15:56:01 +0200 Subject: iwlwifi: mvm: use atomic interface iteration to avoid deadlock Using the non-atomic version creates a dependency between mac80211's iflist_mtx and mvm->mutex. Use the atomic version instead which doesn't take iflist_mtx but can't sleep, so send the HCMD in ASYNC. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index a6b05a0..64acc4a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -475,7 +475,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, if (mvm->vif_count > 1) { IWL_DEBUG_MAC80211(mvm, "Disable power on existing interfaces\n"); - ieee80211_iterate_active_interfaces( + ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_pm_disable_iterator, mvm); diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 6362873..5a92a49 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -194,7 +194,7 @@ int iwl_mvm_power_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif) cmd.id_and_color, iwlmvm_mod_params.power_scheme, le16_to_cpu(cmd.flags)); - return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_SYNC, + return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_ASYNC, sizeof(cmd), &cmd); } -- cgit v0.10.2 From 5718d27fc9a076ca397ea8c3d70e29969be24b9b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 11:29:12 +0100 Subject: iwlwifi: dvm: query and report WoWLAN wakeup reason Implement proper WoWLAN wakeup and query the wakeup reasons, then report them to userspace. Note that this is tricky: a firmware bug (that has been fixed in later versions) means that the status command response isn't properly closed in hardware and thus won't arrive at the host. Sending another command after it closes the status response but the next command gets stuck, etc. We reset the device after querying though, so this is not a big issue, just makes for strange code. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h index 8bce4b0..02c9ebb 100644 --- a/drivers/net/wireless/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -3897,6 +3897,24 @@ struct iwlagn_wowlan_kek_kck_material_cmd { __le64 replay_ctr; } __packed; +#define RF_KILL_INDICATOR_FOR_WOWLAN 0x87 + +/* + * REPLY_WOWLAN_GET_STATUS = 0xe5 + */ +struct iwlagn_wowlan_status { + __le64 replay_ctr; + __le32 rekey_status; + __le32 wakeup_reason; + u8 pattern_number; + u8 reserved1; + __le16 qos_seq_ctr[8]; + __le16 non_qos_seq_ctr; + __le16 reserved2; + union iwlagn_all_tsc_rsc tsc_rsc; + __le16 reserved3; +} __packed; + /* * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification) */ diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 75f6f6c..ebbfcf4 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -442,52 +442,154 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw, return ret; } +struct iwl_resume_data { + struct iwl_priv *priv; + struct iwlagn_wowlan_status *cmd; + bool valid; +}; + +static bool iwl_resume_status_fn(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_resume_data *resume_data = data; + struct iwl_priv *priv = resume_data->priv; + u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + + if (len - 4 != sizeof(*resume_data->cmd)) { + IWL_ERR(priv, "rx wrong size data\n"); + return true; + } + memcpy(resume_data->cmd, pkt->data, sizeof(*resume_data->cmd)); + resume_data->valid = true; + + return true; +} + static int iwlagn_mac_resume(struct ieee80211_hw *hw) { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct ieee80211_vif *vif; - unsigned long flags; - u32 base, status = 0xffffffff; - int ret = -EIO; + u32 base; + int ret; + enum iwl_d3_status d3_status; + struct error_table_start { + /* cf. struct iwl_error_event_table */ + u32 valid; + u32 error_id; + } err_info; + struct iwl_notification_wait status_wait; + static const u8 status_cmd[] = { + REPLY_WOWLAN_GET_STATUS, + }; + struct iwlagn_wowlan_status status_data = {}; + struct iwl_resume_data resume_data = { + .priv = priv, + .cmd = &status_data, + .valid = false, + }; + struct cfg80211_wowlan_wakeup wakeup = { + .pattern_idx = -1, + }; +#ifdef CONFIG_IWLWIFI_DEBUGFS + const struct fw_img *img; +#endif IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->mutex); - iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); + /* we'll clear ctx->vif during iwlagn_prepare_restart() */ + vif = ctx->vif; + + ret = iwl_trans_d3_resume(priv->trans, &d3_status); + if (ret) + goto out_unlock; + + if (d3_status != IWL_D3_STATUS_ALIVE) { + IWL_INFO(priv, "Device was reset during suspend\n"); + goto out_unlock; + } base = priv->device_pointers.error_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - if (iwl_trans_grab_nic_access(priv->trans, true, &flags)) { - iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); - status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(priv->trans, &flags); - ret = 0; + if (!iwlagn_hw_valid_rtc_data_addr(base)) { + IWL_WARN(priv, "Invalid error table during resume!\n"); + goto out_unlock; + } + + iwl_trans_read_mem_bytes(priv->trans, base, + &err_info, sizeof(err_info)); + + if (err_info.valid) { + IWL_INFO(priv, "error table is valid (%d, 0x%x)\n", + err_info.valid, err_info.error_id); + if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { + wakeup.rfkill_release = true; + ieee80211_report_wowlan_wakeup(vif, &wakeup, + GFP_KERNEL); } + goto out_unlock; + } #ifdef CONFIG_IWLWIFI_DEBUGFS - if (ret == 0) { - const struct fw_img *img; - - img = &(priv->fw->img[IWL_UCODE_WOWLAN]); - if (!priv->wowlan_sram) { - priv->wowlan_sram = - kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, - GFP_KERNEL); - } + img = &priv->fw->img[IWL_UCODE_WOWLAN]; + if (!priv->wowlan_sram) + priv->wowlan_sram = + kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, + GFP_KERNEL); + + if (priv->wowlan_sram) + iwl_trans_read_mem(priv->trans, 0x800000, + priv->wowlan_sram, + img->sec[IWL_UCODE_SECTION_DATA].len / 4); +#endif - if (priv->wowlan_sram) - iwl_trans_read_mem( - priv->trans, 0x800000, - priv->wowlan_sram, - img->sec[IWL_UCODE_SECTION_DATA].len / 4); + /* + * This is very strange. The GET_STATUS command is sent but the device + * doesn't reply properly, it seems it doesn't close the RBD so one is + * always left open ... As a result, we need to send another command + * and have to reset the driver afterwards. As we need to switch to + * runtime firmware again that'll happen. + */ + + iwl_init_notification_wait(&priv->notif_wait, &status_wait, status_cmd, + ARRAY_SIZE(status_cmd), iwl_resume_status_fn, + &resume_data); + + iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_GET_STATUS, CMD_ASYNC, 0, NULL); + iwl_dvm_send_cmd_pdu(priv, REPLY_ECHO, CMD_ASYNC, 0, NULL); + /* an RBD is left open in the firmware now! */ + + ret = iwl_wait_notification(&priv->notif_wait, &status_wait, HZ/5); + if (ret) + goto out_unlock; + + if (resume_data.valid && priv->contexts[IWL_RXON_CTX_BSS].vif) { + u32 reasons = le32_to_cpu(status_data.wakeup_reason); + struct cfg80211_wowlan_wakeup *wakeup_report; + + IWL_INFO(priv, "WoWLAN wakeup reason(s): 0x%.8x\n", reasons); + + if (reasons) { + if (reasons & IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET) + wakeup.magic_pkt = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH) + wakeup.pattern_idx = status_data.pattern_number; + if (reasons & (IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | + IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE)) + wakeup.disconnect = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL) + wakeup.gtk_rekey_failure = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ) + wakeup.eap_identity_req = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE) + wakeup.four_way_handshake = true; + wakeup_report = &wakeup; + } else { + wakeup_report = NULL; } -#endif - } - /* we'll clear ctx->vif during iwlagn_prepare_restart() */ - vif = ctx->vif; + ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL); + } priv->wowlan = false; @@ -497,6 +599,7 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) iwl_connection_init_rx_config(priv, ctx); iwlagn_set_rxon_chain(priv, ctx); + out_unlock: mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211(priv, "leave\n"); -- cgit v0.10.2 From 9b26b5002937850846046a99de8c6065ff86fa6d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 22 Jan 2013 13:02:09 +0100 Subject: iwlwifi: mvm: report wakeup reasons Query the wakeup reasons properly and then report them to mac80211. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 5b2c675..a00267f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -763,6 +763,146 @@ int iwl_mvm_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) return ret; } +static void iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + u32 base = mvm->error_event_table; + struct error_table_start { + /* cf. struct iwl_error_event_table */ + u32 valid; + u32 error_id; + } err_info; + struct cfg80211_wowlan_wakeup wakeup = { + .pattern_idx = -1, + }; + struct cfg80211_wowlan_wakeup *wakeup_report = &wakeup; + struct iwl_host_cmd cmd = { + .id = WOWLAN_GET_STATUSES, + .flags = CMD_SYNC | CMD_WANT_SKB, + }; + struct iwl_wowlan_status *status; + u32 reasons; + int ret, len; + bool pkt8023 = false; + struct sk_buff *pkt = NULL; + + iwl_trans_read_mem_bytes(mvm->trans, base, + &err_info, sizeof(err_info)); + + if (err_info.valid) { + IWL_INFO(mvm, "error table is valid (%d)\n", + err_info.valid); + if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { + wakeup.rfkill_release = true; + ieee80211_report_wowlan_wakeup(vif, &wakeup, + GFP_KERNEL); + } + return; + } + + /* only for tracing for now */ + ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); + if (ret) + IWL_ERR(mvm, "failed to query offload statistics (%d)\n", ret); + + ret = iwl_mvm_send_cmd(mvm, &cmd); + if (ret) { + IWL_ERR(mvm, "failed to query status (%d)\n", ret); + return; + } + + /* RF-kill already asserted again... */ + if (!cmd.resp_pkt) + return; + + len = le32_to_cpu(cmd.resp_pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + if (len - sizeof(struct iwl_cmd_header) < sizeof(*status)) { + IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); + goto out; + } + + status = (void *)cmd.resp_pkt->data; + + if (len - sizeof(struct iwl_cmd_header) != + sizeof(*status) + le32_to_cpu(status->wake_packet_bufsize)) { + IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); + goto out; + } + + reasons = le32_to_cpu(status->wakeup_reasons); + + if (reasons == IWL_WOWLAN_WAKEUP_BY_NON_WIRELESS) { + wakeup_report = NULL; + goto report; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_MAGIC_PACKET) { + wakeup.magic_pkt = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_PATTERN) { + wakeup.pattern_idx = + le16_to_cpu(status->pattern_number); + pkt8023 = true; + } + + if (reasons & (IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_MISSED_BEACON | + IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_DEAUTH)) + wakeup.disconnect = true; + + if (reasons & IWL_WOWLAN_WAKEUP_BY_GTK_REKEY_FAILURE) { + wakeup.gtk_rekey_failure = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_RFKILL_DEASSERTED) { + wakeup.rfkill_release = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_EAPOL_REQUEST) { + wakeup.eap_identity_req = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_FOUR_WAY_HANDSHAKE) { + wakeup.four_way_handshake = true; + pkt8023 = true; + } + + if (status->wake_packet_bufsize) { + u32 pktsize = le32_to_cpu(status->wake_packet_bufsize); + u32 pktlen = le32_to_cpu(status->wake_packet_length); + + if (pkt8023) { + pkt = alloc_skb(pktsize, GFP_KERNEL); + if (!pkt) + goto report; + memcpy(skb_put(pkt, pktsize), status->wake_packet, + pktsize); + if (ieee80211_data_to_8023(pkt, vif->addr, vif->type)) + goto report; + wakeup.packet = pkt->data; + wakeup.packet_present_len = pkt->len; + wakeup.packet_len = pkt->len - (pktlen - pktsize); + wakeup.packet_80211 = false; + } else { + wakeup.packet = status->wake_packet; + wakeup.packet_present_len = pktsize; + wakeup.packet_len = pktlen; + wakeup.packet_80211 = true; + } + } + + report: + ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL); + kfree_skb(pkt); + + out: + iwl_free_resp(&cmd); +} + int iwl_mvm_resume(struct ieee80211_hw *hw) { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); @@ -770,14 +910,8 @@ int iwl_mvm_resume(struct ieee80211_hw *hw) .mvm = mvm, }; struct ieee80211_vif *vif = NULL; - u32 base; int ret; enum iwl_d3_status d3_status; - struct error_table_start { - /* cf. struct iwl_error_event_table */ - u32 valid; - u32 error_id; - } err_info; mutex_lock(&mvm->mutex); @@ -800,27 +934,7 @@ int iwl_mvm_resume(struct ieee80211_hw *hw) goto out_unlock; } - base = mvm->error_event_table; - - iwl_trans_read_mem_bytes(mvm->trans, base, - &err_info, sizeof(err_info)); - - if (err_info.valid) { - IWL_INFO(mvm, "error table is valid (%d)\n", - err_info.valid); - if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) - IWL_ERR(mvm, "this was due to RF-kill\n"); - goto out_unlock; - } - - /* TODO: get status and whatever else ... */ - ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_GET_STATUSES, CMD_SYNC, 0, NULL); - if (ret) - IWL_ERR(mvm, "failed to query status (%d)\n", ret); - - ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); - if (ret) - IWL_ERR(mvm, "failed to query offloads (%d)\n", ret); + iwl_mvm_query_wakeup_reasons(mvm, vif); out_unlock: mutex_unlock(&mvm->mutex); -- cgit v0.10.2 From 739e42f4f3fc5906db049b54e45498c7ab5bba81 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 23:13:39 +0100 Subject: iwlwifi: dvm: apply beacon changes immediately If the AP/GO beacon changes, apply such a change immediately, otherwise the AP/GO beacon can be stale for a long time. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 9fabd26..23be948 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1545,10 +1545,9 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, bss_conf->bssid); } - if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC && - priv->beacon_ctx) { + if (changes & BSS_CHANGED_BEACON && priv->beacon_ctx == ctx) { if (iwlagn_update_beacon(priv, vif)) - IWL_ERR(priv, "Error sending IBSS beacon\n"); + IWL_ERR(priv, "Error updating beacon\n"); } mutex_unlock(&priv->mutex); -- cgit v0.10.2 From 210a544e78c7ce4e5aa5ec199eeb807b0f03b5b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 23:48:23 +0100 Subject: iwlwifi: mvm: don't delay the association until after beacon If we haven't heard a beacon before we associate we can still start the association process and set the MAC in the firmware to associated only after having received a beacon with DTIM period by reacting to the new change flag (BSS_CHANGED_DTIM_PERIOD) from mac80211. This reduces the association time in these cases. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index c08a17a..0854dc3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -584,7 +584,11 @@ static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mac_data_sta *ctxt_sta) { - ctxt_sta->is_assoc = cpu_to_le32(vif->bss_conf.assoc ? 1 : 0); + /* We need the dtim_period to set the MAC as associated */ + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) + ctxt_sta->is_assoc = cpu_to_le32(1); + else + ctxt_sta->is_assoc = cpu_to_le32(0); ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int); ctxt_sta->bi_reciprocal = diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index e0d79e3..6bfcb3b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -114,7 +114,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_WANT_MONITOR_VIF | IEEE80211_HW_SCAN_WHILE_IDLE | - IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | IEEE80211_HW_AMPDU_AGGREGATION; @@ -671,8 +670,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, IWL_ERR(mvm, "failed to update quotas\n"); return; } - iwl_mvm_remove_time_event(mvm, mvmvif, - &mvmvif->time_event_data); } else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { /* remove AP station now that the MAC is unassoc */ ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id); @@ -684,6 +681,13 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, if (ret) IWL_ERR(mvm, "failed to update quotas\n"); } + } else if (changes & BSS_CHANGED_DTIM_PERIOD) { + /* + * We received a beacon _after_ association so + * remove the session protection. + */ + iwl_mvm_remove_time_event(mvm, mvmvif, + &mvmvif->time_event_data); } else if (changes & BSS_CHANGED_PS) { /* * TODO: remove this temporary code. diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index 4d62a5d..194bfb7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -184,9 +184,11 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, */ if (te_data->vif->type == NL80211_IFTYPE_STATION && (!te_data->vif->bss_conf.assoc || - !te_data->vif->bss_conf.dtim_period)) + !te_data->vif->bss_conf.dtim_period)) { IWL_ERR(mvm, "No assocation and the time event is over already...\n"); + ieee80211_connection_loss(te_data->vif); + } iwl_mvm_te_clear_data(mvm, te_data); } else if (le32_to_cpu(notif->action) == TE_NOTIF_HOST_START) { -- cgit v0.10.2 From ffdf968d878f85620c1d4685b9543f894ef56db0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 15:28:17 +0100 Subject: iwlwifi: mvm: don't wait for session protection to start Now that mac80211 no longer starts the auth/assoc timeouts when it transmits the frame, but only when the frame status arrives, we no longer need to wait for the session protection time event to start, we can schedule it and enqueue the auth/assoc frame right away. This reduces the amount of time we block mac80211's workqueue. Also, since now we no longer need different behavior for session protection and P2P time events, refactor the code to have just a common implementation. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index 194bfb7..c09b71f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -230,57 +230,86 @@ int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, return 0; } -static bool iwl_mvm_time_event_notif(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt, void *data) +static bool iwl_mvm_time_event_response(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) { struct iwl_mvm *mvm = container_of(notif_wait, struct iwl_mvm, notif_wait); struct iwl_mvm_time_event_data *te_data = data; - struct ieee80211_vif *vif = te_data->vif; - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); - struct iwl_time_event_notif *notif; struct iwl_time_event_resp *resp; + int resp_len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); + if (WARN_ON(pkt->hdr.cmd != TIME_EVENT_CMD)) + return true; - /* until we do something else */ - WARN_ON(te_data->id != TE_BSS_STA_AGGRESSIVE_ASSOC); + if (WARN_ON_ONCE(resp_len != sizeof(pkt->hdr) + sizeof(*resp))) { + IWL_ERR(mvm, "Invalid TIME_EVENT_CMD response\n"); + return true; + } - switch (pkt->hdr.cmd) { - case TIME_EVENT_CMD: - resp = (void *)pkt->data; - /* TODO: I can't check that since the fw is buggy - it doesn't - * put the right values when we remove a TE. We can be here - * when we remove a TE because the remove TE command is sent in - * ASYNC... - * WARN_ON(mac_id_n_color != le32_to_cpu(resp->id_and_color)); - */ - te_data->uid = le32_to_cpu(resp->unique_id); - IWL_DEBUG_TE(mvm, "Got response - UID = 0x%x\n", te_data->uid); - return false; - - case TIME_EVENT_NOTIFICATION: - notif = (void *)pkt->data; - WARN_ON(le32_to_cpu(notif->status) != 1); - WARN_ON(mac_id_n_color != le32_to_cpu(notif->id_and_color)); - /* check if this is our Time Event that is starting */ - if (le32_to_cpu(notif->unique_id) != te_data->uid) - return false; - IWL_DEBUG_TE(mvm, "Event %d is starting - time is %d\n", - te_data->uid, le32_to_cpu(notif->timestamp)); - - WARN_ONCE(!le32_to_cpu(notif->status), - "Failed to schedule protected session TE\n"); + resp = (void *)pkt->data; + te_data->uid = le32_to_cpu(resp->unique_id); + IWL_DEBUG_TE(mvm, "TIME_EVENT_CMD response - UID = 0x%x\n", + te_data->uid); + return true; +} - te_data->running = true; - te_data->end_jiffies = jiffies + - TU_TO_JIFFIES(te_data->duration); - return true; +static int iwl_mvm_time_event_send_add(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_mvm_time_event_data *te_data, + struct iwl_time_event_cmd *te_cmd) +{ + static const u8 time_event_response[] = { TIME_EVENT_CMD }; + struct iwl_notification_wait wait_time_event; + int ret; + + lockdep_assert_held(&mvm->mutex); + + spin_lock_bh(&mvm->time_event_lock); + if (WARN_ON(te_data->id != TE_MAX)) { + spin_unlock_bh(&mvm->time_event_lock); + return -EIO; + } + te_data->vif = vif; + te_data->duration = le32_to_cpu(te_cmd->duration); + te_data->id = le32_to_cpu(te_cmd->id); + list_add_tail(&te_data->list, &mvm->time_event_list); + spin_unlock_bh(&mvm->time_event_lock); + + /* + * Use a notification wait, which really just processes the + * command response and doesn't wait for anything, in order + * to be able to process the response and get the UID inside + * the RX path. Using CMD_WANT_SKB doesn't work because it + * stores the buffer and then wakes up this thread, by which + * time another notification (that the time event started) + * might already be processed unsuccessfully. + */ + iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, + time_event_response, + ARRAY_SIZE(time_event_response), + iwl_mvm_time_event_response, te_data); + + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, + sizeof(*te_cmd), te_cmd); + if (ret) { + IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); + iwl_remove_notification(&mvm->notif_wait, &wait_time_event); + goto out_clear_te; + } - default: - WARN_ON(1); - return false; - }; + /* No need to wait for anything, so just pass 1 (0 isn't valid) */ + ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1); + /* should never fail */ + WARN_ON_ONCE(ret); + + if (ret) { + out_clear_te: + spin_lock_bh(&mvm->time_event_lock); + iwl_mvm_te_clear_data(mvm, te_data); + spin_unlock_bh(&mvm->time_event_lock); + } + return ret; } void iwl_mvm_protect_session(struct iwl_mvm *mvm, @@ -289,11 +318,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; - static const u8 time_event_notif[] = { TIME_EVENT_CMD, - TIME_EVENT_NOTIFICATION }; - struct iwl_notification_wait wait_time_event; struct iwl_time_event_cmd time_cmd = {}; - int ret; lockdep_assert_held(&mvm->mutex); @@ -320,12 +345,6 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, iwl_mvm_stop_session_protection(mvm, vif); } - iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, - time_event_notif, - ARRAY_SIZE(time_event_notif), - iwl_mvm_time_event_notif, - &mvmvif->time_event_data); - time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); time_cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); @@ -333,6 +352,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, time_cmd.apply_time = cpu_to_le32(iwl_read_prph(mvm->trans, DEVICE_SYSTEM_TIME_REG)); + time_cmd.dep_policy = TE_INDEPENDENT; time_cmd.is_present = cpu_to_le32(1); time_cmd.max_frags = cpu_to_le32(TE_FRAG_NONE); @@ -344,33 +364,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, time_cmd.repeat = cpu_to_le32(1); time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_START | TE_NOTIF_HOST_END); - te_data->vif = vif; - te_data->duration = duration; - - spin_lock_bh(&mvm->time_event_lock); - te_data->id = le32_to_cpu(time_cmd.id); - list_add_tail(&te_data->list, &mvm->time_event_list); - spin_unlock_bh(&mvm->time_event_lock); - - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, - sizeof(time_cmd), &time_cmd); - if (ret) { - IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); - goto out_remove_notif; - } - - ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1 * HZ); - if (ret) { - IWL_ERR(mvm, "%s - failed on timeout\n", __func__); - spin_lock_bh(&mvm->time_event_lock); - iwl_mvm_te_clear_data(mvm, te_data); - spin_unlock_bh(&mvm->time_event_lock); - } - - return; - -out_remove_notif: - iwl_remove_notification(&mvm->notif_wait, &wait_time_event); + iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd); } /* @@ -435,43 +429,12 @@ void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm, iwl_mvm_remove_time_event(mvm, mvmvif, te_data); } -static bool iwl_mvm_roc_te_notif(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt, void *data) -{ - struct iwl_mvm *mvm = - container_of(notif_wait, struct iwl_mvm, notif_wait); - struct iwl_mvm_time_event_data *te_data = data; - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); - struct iwl_time_event_resp *resp; - - u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); - - /* until we do something else */ - WARN_ON(te_data->id != IWL_MVM_ROC_TE_TYPE); - - switch (pkt->hdr.cmd) { - case TIME_EVENT_CMD: - resp = (void *)pkt->data; - WARN_ON(mac_id_n_color != le32_to_cpu(resp->id_and_color)); - te_data->uid = le32_to_cpu(resp->unique_id); - IWL_DEBUG_TE(mvm, "Got response - UID = 0x%x\n", te_data->uid); - return true; - - default: - WARN_ON(1); - return false; - }; -} - int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, int duration) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; - static const u8 roc_te_notif[] = { TIME_EVENT_CMD }; - struct iwl_notification_wait wait_time_event; struct iwl_time_event_cmd time_cmd = {}; - int ret; lockdep_assert_held(&mvm->mutex); if (te_data->running) { @@ -485,12 +448,6 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, */ flush_work(&mvm->roc_done_wk); - iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, - roc_te_notif, - ARRAY_SIZE(roc_te_notif), - iwl_mvm_roc_te_notif, - &mvmvif->time_event_data); - time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); time_cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); @@ -516,33 +473,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, time_cmd.repeat = cpu_to_le32(1); time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_START | TE_NOTIF_HOST_END); - /* Push the te data to the tracked te list */ - te_data->vif = vif; - te_data->duration = MSEC_TO_TU(duration); - - spin_lock_bh(&mvm->time_event_lock); - te_data->id = le32_to_cpu(time_cmd.id); - list_add_tail(&te_data->list, &mvm->time_event_list); - spin_unlock_bh(&mvm->time_event_lock); - - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, - sizeof(time_cmd), &time_cmd); - if (ret) { - IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); - goto out_remove_notif; - } - - ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1 * HZ); - if (ret) { - IWL_ERR(mvm, "%s - failed on timeout\n", __func__); - iwl_mvm_te_clear_data(mvm, te_data); - } - - return ret; - -out_remove_notif: - iwl_remove_notification(&mvm->notif_wait, &wait_time_event); - return ret; + return iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd); } void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm) -- cgit v0.10.2 From 7a4539736eaeecb6bec25a718492fed6377a23af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 13:10:44 +0100 Subject: iwlwifi: mvm: update station when marked associated In managed mode, the HT/VHT capabilities aren't set when the station is initially added, so update the station when it is marked associated. In AP/GO mode, the station will typically be added with full capabilities today, but an upcoming change in hostapd may mean a similar scenario as for managed mode, therefore do the update unconditionally. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index a00267f..c64d864 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -490,7 +490,7 @@ static int iwl_mvm_d3_reprogram(struct iwl_mvm *mvm, struct ieee80211_vif *vif, return -EIO; } - ret = iwl_mvm_sta_add_to_fw(mvm, ap_sta); + ret = iwl_mvm_sta_send_to_fw(mvm, ap_sta, false); if (ret) return ret; rcu_assign_pointer(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id], ap_sta); diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 6bfcb3b..5bdcbcf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -926,8 +926,10 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, ret = 0; } else if (old_state == IEEE80211_STA_AUTH && new_state == IEEE80211_STA_ASSOC) { - iwl_mvm_rs_rate_init(mvm, sta, mvmvif->phy_ctxt->channel->band); - ret = 0; + ret = iwl_mvm_update_sta(mvm, vif, sta); + if (ret == 0) + iwl_mvm_rs_rate_init(mvm, sta, + mvmvif->phy_ctxt->channel->band); } else if (old_state == IEEE80211_STA_ASSOC && new_state == IEEE80211_STA_AUTHORIZED) { ret = 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 6b22bac..a1eb692 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -81,8 +81,9 @@ static int iwl_mvm_find_free_sta_id(struct iwl_mvm *mvm) return IWL_MVM_STATION_COUNT; } -/* add a NEW station to fw */ -int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta) +/* send station add/update command to firmware */ +int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + bool update) { struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; struct iwl_mvm_add_sta_cmd add_sta_cmd; @@ -94,8 +95,11 @@ int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta) add_sta_cmd.sta_id = mvm_sta->sta_id; add_sta_cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); - add_sta_cmd.tfd_queue_msk = cpu_to_le32(mvm_sta->tfd_queue_msk); - memcpy(&add_sta_cmd.addr, sta->addr, ETH_ALEN); + if (!update) { + add_sta_cmd.tfd_queue_msk = cpu_to_le32(mvm_sta->tfd_queue_msk); + memcpy(&add_sta_cmd.addr, sta->addr, ETH_ALEN); + } + add_sta_cmd.add_modify = update ? 1 : 0; /* STA_FLG_FAT_EN_MSK ? */ /* STA_FLG_MIMO_EN_MSK ? */ @@ -181,7 +185,7 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, /* for HW restart - need to reset the seq_number etc... */ memset(mvm_sta->tid_data, 0, sizeof(mvm_sta->tid_data)); - ret = iwl_mvm_sta_add_to_fw(mvm, sta); + ret = iwl_mvm_sta_send_to_fw(mvm, sta, false); if (ret) return ret; @@ -195,6 +199,13 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, return 0; } +int iwl_mvm_update_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + return iwl_mvm_sta_send_to_fw(mvm, sta, true); +} + int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool drain) { diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h index 1bf3010..bdd7c5e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -309,10 +309,14 @@ struct iwl_mvm_int_sta { u32 tfd_queue_msk; }; -int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta); +int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + bool update); int iwl_mvm_add_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); +int iwl_mvm_update_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int iwl_mvm_rm_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); -- cgit v0.10.2 From 36eed56a8f7e1bd7fb5014ea0e702708e1702f30 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 13:25:25 +0200 Subject: iwlwifi: mvm: beautify code in rx_handlers Make the code more readable, and while at it also add a missing "break" to avoid checking handlers that cannot be used. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 983dca3..aa59adf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -536,25 +536,28 @@ static int iwl_mvm_rx_dispatch(struct iwl_op_mode *op_mode, for (i = 0; i < ARRAY_SIZE(iwl_mvm_rx_handlers); i++) { const struct iwl_rx_handlers *rx_h = &iwl_mvm_rx_handlers[i]; - if (rx_h->cmd_id == pkt->hdr.cmd) { - struct iwl_async_handler_entry *entry; - if (!rx_h->async) - return rx_h->fn(mvm, rxb, cmd); - - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - /* we can't do much... */ - if (!entry) - return 0; - - entry->rxb._page = rxb_steal_page(rxb); - entry->rxb._offset = rxb->_offset; - entry->rxb._rx_page_order = rxb->_rx_page_order; - entry->fn = rx_h->fn; - spin_lock(&mvm->async_handlers_lock); - list_add_tail(&entry->list, &mvm->async_handlers_list); - spin_unlock(&mvm->async_handlers_lock); - schedule_work(&mvm->async_handlers_wk); - } + struct iwl_async_handler_entry *entry; + + if (rx_h->cmd_id != pkt->hdr.cmd) + continue; + + if (!rx_h->async) + return rx_h->fn(mvm, rxb, cmd); + + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + /* we can't do much... */ + if (!entry) + return 0; + + entry->rxb._page = rxb_steal_page(rxb); + entry->rxb._offset = rxb->_offset; + entry->rxb._rx_page_order = rxb->_rx_page_order; + entry->fn = rx_h->fn; + spin_lock(&mvm->async_handlers_lock); + list_add_tail(&entry->list, &mvm->async_handlers_list); + spin_unlock(&mvm->async_handlers_lock); + schedule_work(&mvm->async_handlers_wk); + break; } return 0; -- cgit v0.10.2 From c88d0dc1cc0182358ce1ae6f457dace34539eb12 Mon Sep 17 00:00:00 2001 From: Catalin Iacob Date: Mon, 11 Feb 2013 22:18:05 +0100 Subject: rtlwifi: Initialize rate_init member of struct rate_control_ops This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c..6ad8bb7 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -217,6 +217,12 @@ static void rtl_tx_status(void *ppriv, } } +static void rtl_rate_init(void *ppriv, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) +{ +} + static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -261,6 +267,7 @@ static struct rate_control_ops rtl_rate_ops = { .free = rtl_rate_free, .alloc_sta = rtl_rate_alloc_sta, .free_sta = rtl_rate_free_sta, + .rate_init = rtl_rate_init, .tx_status = rtl_tx_status, .get_rate = rtl_get_rate, }; -- cgit v0.10.2 From 570617e79c3ab31ce426efe9024af84efca862eb Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 12 Feb 2013 05:15:33 +0000 Subject: net: sctp: remove unused multiple cookie keys Vlad says: The whole multiple cookie keys code is completely unused and has been all this time. Noone uses anything other then the secret_key[0] since there is no changeover support anywhere. Thus, for now clean up its left-over fragments. Cc: Neil Horman Cc: Vlad Yasevich Signed-off-by: Daniel Borkmann Acked-by: Neil Horman Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h index c29707d..a7dd5c5 100644 --- a/include/net/sctp/constants.h +++ b/include/net/sctp/constants.h @@ -303,7 +303,7 @@ enum { SCTP_MAX_GABS = 16 }; * to which we will raise the P-MTU. */ #define SCTP_DEFAULT_MINSEGMENT 512 /* MTU size ... if no mtu disc */ -#define SCTP_HOW_MANY_SECRETS 2 /* How many secrets I keep */ + #define SCTP_SECRET_SIZE 32 /* Number of octets in a 256 bits. */ #define SCTP_SIGNATURE_SIZE 20 /* size of a SLA-1 signature */ diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index fdeb85a..0e0f9d2 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1236,10 +1236,7 @@ struct sctp_endpoint { * Discussion in [RFC1750] can be helpful in * selection of the key. */ - __u8 secret_key[SCTP_HOW_MANY_SECRETS][SCTP_SECRET_SIZE]; - int current_key; - int last_key; - int key_changed_at; + __u8 secret_key[SCTP_SECRET_SIZE]; /* digest: This is a digest of the sctp cookie. This field is * only used on the receive path when we try to validate diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index 1a9c5fb..73aad3d 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -151,9 +151,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, ep->rcvbuf_policy = net->sctp.rcvbuf_policy; /* Initialize the secret key used with cookie. */ - get_random_bytes(&ep->secret_key[0], SCTP_SECRET_SIZE); - ep->last_key = ep->current_key = 0; - ep->key_changed_at = jiffies; + get_random_bytes(ep->secret_key, sizeof(ep->secret_key)); /* SCTP-AUTH extensions*/ INIT_LIST_HEAD(&ep->endpoint_shared_keys); @@ -249,8 +247,6 @@ void sctp_endpoint_free(struct sctp_endpoint *ep) /* Final destructor for endpoint. */ static void sctp_endpoint_destroy(struct sctp_endpoint *ep) { - int i; - SCTP_ASSERT(ep->base.dead, "Endpoint is not dead", return); /* Free up the HMAC transform. */ @@ -273,8 +269,7 @@ static void sctp_endpoint_destroy(struct sctp_endpoint *ep) sctp_inq_free(&ep->base.inqueue); sctp_bind_addr_free(&ep->base.bind_addr); - for (i = 0; i < SCTP_HOW_MANY_SECRETS; ++i) - memset(&ep->secret_key[i], 0, SCTP_SECRET_SIZE); + memset(ep->secret_key, 0, sizeof(ep->secret_key)); /* Remove and free the port */ if (sctp_sk(ep->base.sk)->bind_hash) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index e1c5fc2..a193f3b 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1589,8 +1589,6 @@ static sctp_cookie_param_t *sctp_pack_cookie(const struct sctp_endpoint *ep, struct sctp_signed_cookie *cookie; struct scatterlist sg; int headersize, bodysize; - unsigned int keylen; - char *key; /* Header size is static data prior to the actual cookie, including * any padding. @@ -1650,12 +1648,11 @@ static sctp_cookie_param_t *sctp_pack_cookie(const struct sctp_endpoint *ep, /* Sign the message. */ sg_init_one(&sg, &cookie->c, bodysize); - keylen = SCTP_SECRET_SIZE; - key = (char *)ep->secret_key[ep->current_key]; desc.tfm = sctp_sk(ep->base.sk)->hmac; desc.flags = 0; - if (crypto_hash_setkey(desc.tfm, key, keylen) || + if (crypto_hash_setkey(desc.tfm, ep->secret_key, + sizeof(ep->secret_key)) || crypto_hash_digest(&desc, &sg, bodysize, cookie->signature)) goto free_cookie; } @@ -1682,8 +1679,7 @@ struct sctp_association *sctp_unpack_cookie( int headersize, bodysize, fixed_size; __u8 *digest = ep->digest; struct scatterlist sg; - unsigned int keylen, len; - char *key; + unsigned int len; sctp_scope_t scope; struct sk_buff *skb = chunk->skb; struct timeval tv; @@ -1718,34 +1714,21 @@ struct sctp_association *sctp_unpack_cookie( goto no_hmac; /* Check the signature. */ - keylen = SCTP_SECRET_SIZE; sg_init_one(&sg, bear_cookie, bodysize); - key = (char *)ep->secret_key[ep->current_key]; desc.tfm = sctp_sk(ep->base.sk)->hmac; desc.flags = 0; memset(digest, 0x00, SCTP_SIGNATURE_SIZE); - if (crypto_hash_setkey(desc.tfm, key, keylen) || + if (crypto_hash_setkey(desc.tfm, ep->secret_key, + sizeof(ep->secret_key)) || crypto_hash_digest(&desc, &sg, bodysize, digest)) { *error = -SCTP_IERROR_NOMEM; goto fail; } if (memcmp(digest, cookie->signature, SCTP_SIGNATURE_SIZE)) { - /* Try the previous key. */ - key = (char *)ep->secret_key[ep->last_key]; - memset(digest, 0x00, SCTP_SIGNATURE_SIZE); - if (crypto_hash_setkey(desc.tfm, key, keylen) || - crypto_hash_digest(&desc, &sg, bodysize, digest)) { - *error = -SCTP_IERROR_NOMEM; - goto fail; - } - - if (memcmp(digest, cookie->signature, SCTP_SIGNATURE_SIZE)) { - /* Yikes! Still bad signature! */ - *error = -SCTP_IERROR_BAD_SIG; - goto fail; - } + *error = -SCTP_IERROR_BAD_SIG; + goto fail; } no_hmac: -- cgit v0.10.2 From f6e135c81eeb648c6addc6aeff2ee80f28ea413b Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 11 Feb 2013 09:52:18 +0000 Subject: driver: net: ethernet: davinci_cpdma: add support for directed packet and source port detection * Introduced parameter to add port number for directed packet in cpdma_chan_submit * Source port detection macro with DMA descriptor status Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 888708c..8ac60c7 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -424,7 +424,7 @@ void cpsw_rx_handler(void *token, int len, int status) return; ret = cpdma_chan_submit(priv->rxch, skb, skb->data, - skb_tailroom(skb), GFP_KERNEL); + skb_tailroom(skb), 0, GFP_KERNEL); } WARN_ON(ret < 0); } @@ -705,7 +705,7 @@ static int cpsw_ndo_open(struct net_device *ndev) if (!skb) break; ret = cpdma_chan_submit(priv->rxch, skb, skb->data, - skb_tailroom(skb), GFP_KERNEL); + skb_tailroom(skb), 0, GFP_KERNEL); if (WARN_ON(ret < 0)) break; } @@ -766,7 +766,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, skb_tx_timestamp(skb); ret = cpdma_chan_submit(priv->txch, skb, skb->data, - skb->len, GFP_KERNEL); + skb->len, 0, GFP_KERNEL); if (unlikely(ret != 0)) { cpsw_err(priv, tx_err, "desc submit failed\n"); goto fail; diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index f862918..198cf18 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -60,6 +60,9 @@ #define CPDMA_DESC_EOQ BIT(28) #define CPDMA_DESC_TD_COMPLETE BIT(27) #define CPDMA_DESC_PASS_CRC BIT(26) +#define CPDMA_DESC_TO_PORT_EN BIT(20) +#define CPDMA_TO_PORT_SHIFT 16 +#define CPDMA_DESC_PORT_MASK (BIT(18) | BIT(17) | BIT(16)) #define CPDMA_TEARDOWN_VALUE 0xfffffffc @@ -132,6 +135,14 @@ struct cpdma_chan { #define chan_write(chan, fld, v) __raw_writel(v, (chan)->fld) #define desc_write(desc, fld, v) __raw_writel((u32)(v), &(desc)->fld) +#define cpdma_desc_to_port(chan, mode, directed) \ + do { \ + if (!is_rx_chan(chan) && ((directed == 1) || \ + (directed == 2))) \ + mode |= (CPDMA_DESC_TO_PORT_EN | \ + (directed << CPDMA_TO_PORT_SHIFT)); \ + } while (0) + /* * Utility constructs for a cpdma descriptor pool. Some devices (e.g. davinci * emac) have dedicated on-chip memory for these descriptors. Some other @@ -662,7 +673,7 @@ static void __cpdma_chan_submit(struct cpdma_chan *chan, } int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, - int len, gfp_t gfp_mask) + int len, int directed, gfp_t gfp_mask) { struct cpdma_ctlr *ctlr = chan->ctlr; struct cpdma_desc __iomem *desc; @@ -692,6 +703,7 @@ int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, buffer = dma_map_single(ctlr->dev, data, len, chan->dir); mode = CPDMA_DESC_OWNER | CPDMA_DESC_SOP | CPDMA_DESC_EOP; + cpdma_desc_to_port(chan, mode, directed); desc_write(desc, hw_next, 0); desc_write(desc, hw_buffer, buffer); @@ -782,7 +794,8 @@ static int __cpdma_chan_process(struct cpdma_chan *chan) status = -EBUSY; goto unlock_ret; } - status = status & (CPDMA_DESC_EOQ | CPDMA_DESC_TD_COMPLETE); + status = status & (CPDMA_DESC_EOQ | CPDMA_DESC_TD_COMPLETE | + CPDMA_DESC_PORT_MASK); chan->head = desc_from_phys(pool, desc_read(desc, hw_next)); chan_write(chan, cp, desc_dma); diff --git a/drivers/net/ethernet/ti/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h index 8d2aeb2..a97d6ab 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.h +++ b/drivers/net/ethernet/ti/davinci_cpdma.h @@ -24,6 +24,8 @@ #define __chan_linear(chan_num) ((chan_num) & (CPDMA_MAX_CHANNELS - 1)) #define chan_linear(chan) __chan_linear((chan)->chan_num) +#define CPDMA_RX_SOURCE_PORT(__status__) ((__status__ >> 16) & 0x7) + struct cpdma_params { struct device *dev; void __iomem *dmaregs; @@ -82,7 +84,7 @@ int cpdma_chan_dump(struct cpdma_chan *chan); int cpdma_chan_get_stats(struct cpdma_chan *chan, struct cpdma_chan_stats *stats); int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, - int len, gfp_t gfp_mask); + int len, int directed, gfp_t gfp_mask); int cpdma_chan_process(struct cpdma_chan *chan, int quota); int cpdma_ctlr_int_ctrl(struct cpdma_ctlr *ctlr, bool enable); diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 242ec55..52c0536 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1037,7 +1037,7 @@ static void emac_rx_handler(void *token, int len, int status) recycle: ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, - skb_tailroom(skb), GFP_KERNEL); + skb_tailroom(skb), 0, GFP_KERNEL); WARN_ON(ret == -ENOMEM); if (unlikely(ret < 0)) @@ -1092,7 +1092,7 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) skb_tx_timestamp(skb); ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, - GFP_KERNEL); + 0, GFP_KERNEL); if (unlikely(ret_code != 0)) { if (netif_msg_tx_err(priv) && net_ratelimit()) dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); @@ -1558,7 +1558,7 @@ static int emac_dev_open(struct net_device *ndev) break; ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, - skb_tailroom(skb), GFP_KERNEL); + skb_tailroom(skb), 0, GFP_KERNEL); if (WARN_ON(ret < 0)) break; } -- cgit v0.10.2 From 9232b16df2167c8afcb89de39ee85f5091ebacff Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 11 Feb 2013 09:52:19 +0000 Subject: driver: net: ethernet: cpsw: make cpts as pointer As CPTS is common module for both EMAC in Dual EMAC mode so making cpts as pointer. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 8ac60c7..4b964bb 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -319,7 +319,7 @@ struct cpsw_priv { /* snapshot of IRQ numbers */ u32 irqs_table[4]; u32 num_irqs; - struct cpts cpts; + struct cpts *cpts; }; #define napi_to_priv(napi) container_of(napi, struct cpsw_priv, napi) @@ -383,7 +383,7 @@ void cpsw_tx_handler(void *token, int len, int status) */ if (unlikely(netif_queue_stopped(ndev))) netif_start_queue(ndev); - cpts_tx_timestamp(&priv->cpts, skb); + cpts_tx_timestamp(priv->cpts, skb); priv->stats.tx_packets++; priv->stats.tx_bytes += len; dev_kfree_skb_any(skb); @@ -404,7 +404,7 @@ void cpsw_rx_handler(void *token, int len, int status) } if (likely(status >= 0)) { skb_put(skb, len); - cpts_rx_timestamp(&priv->cpts, skb); + cpts_rx_timestamp(priv->cpts, skb); skb->protocol = eth_type_trans(skb, ndev); netif_receive_skb(skb); priv->stats.rx_bytes += len; @@ -760,7 +760,8 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } - if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && priv->cpts.tx_enable) + if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && + priv->cpts->tx_enable) skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; skb_tx_timestamp(skb); @@ -815,7 +816,7 @@ static void cpsw_hwtstamp_v1(struct cpsw_priv *priv) struct cpsw_slave *slave = &priv->slaves[priv->data.cpts_active_slave]; u32 ts_en, seq_id; - if (!priv->cpts.tx_enable && !priv->cpts.rx_enable) { + if (!priv->cpts->tx_enable && !priv->cpts->rx_enable) { slave_write(slave, 0, CPSW1_TS_CTL); return; } @@ -823,10 +824,10 @@ static void cpsw_hwtstamp_v1(struct cpsw_priv *priv) seq_id = (30 << CPSW_V1_SEQ_ID_OFS_SHIFT) | ETH_P_1588; ts_en = EVENT_MSG_BITS << CPSW_V1_MSG_TYPE_OFS; - if (priv->cpts.tx_enable) + if (priv->cpts->tx_enable) ts_en |= CPSW_V1_TS_TX_EN; - if (priv->cpts.rx_enable) + if (priv->cpts->rx_enable) ts_en |= CPSW_V1_TS_RX_EN; slave_write(slave, ts_en, CPSW1_TS_CTL); @@ -841,10 +842,10 @@ static void cpsw_hwtstamp_v2(struct cpsw_priv *priv) ctrl = slave_read(slave, CPSW2_CONTROL); ctrl &= ~CTRL_ALL_TS_MASK; - if (priv->cpts.tx_enable) + if (priv->cpts->tx_enable) ctrl |= CTRL_TX_TS_BITS; - if (priv->cpts.rx_enable) + if (priv->cpts->rx_enable) ctrl |= CTRL_RX_TS_BITS; mtype = (30 << TS_SEQ_ID_OFFSET_SHIFT) | EVENT_MSG_BITS; @@ -857,7 +858,7 @@ static void cpsw_hwtstamp_v2(struct cpsw_priv *priv) static int cpsw_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) { struct cpsw_priv *priv = netdev_priv(dev); - struct cpts *cpts = &priv->cpts; + struct cpts *cpts = priv->cpts; struct hwtstamp_config cfg; if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) @@ -1086,7 +1087,7 @@ static int cpsw_get_ts_info(struct net_device *ndev, SOF_TIMESTAMPING_RX_SOFTWARE | SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_RAW_HARDWARE; - info->phc_index = priv->cpts.phc_index; + info->phc_index = priv->cpts->phc_index; info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON); @@ -1272,6 +1273,11 @@ static int cpsw_probe(struct platform_device *pdev) priv->dev = &ndev->dev; priv->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG); priv->rx_packet_max = max(rx_packet_max, 128); + priv->cpts = devm_kzalloc(&pdev->dev, sizeof(struct cpts), GFP_KERNEL); + if (!ndev) { + pr_err("error allocating cpts\n"); + goto clean_ndev_ret; + } /* * This may be required here for child devices. @@ -1358,7 +1364,7 @@ static int cpsw_probe(struct platform_device *pdev) switch (priv->version) { case CPSW_VERSION_1: priv->host_port_regs = ss_regs + CPSW1_HOST_PORT_OFFSET; - priv->cpts.reg = ss_regs + CPSW1_CPTS_OFFSET; + priv->cpts->reg = ss_regs + CPSW1_CPTS_OFFSET; dma_params.dmaregs = ss_regs + CPSW1_CPDMA_OFFSET; dma_params.txhdp = ss_regs + CPSW1_STATERAM_OFFSET; ale_params.ale_regs = ss_regs + CPSW1_ALE_OFFSET; @@ -1369,7 +1375,7 @@ static int cpsw_probe(struct platform_device *pdev) break; case CPSW_VERSION_2: priv->host_port_regs = ss_regs + CPSW2_HOST_PORT_OFFSET; - priv->cpts.reg = ss_regs + CPSW2_CPTS_OFFSET; + priv->cpts->reg = ss_regs + CPSW2_CPTS_OFFSET; dma_params.dmaregs = ss_regs + CPSW2_CPDMA_OFFSET; dma_params.txhdp = ss_regs + CPSW2_STATERAM_OFFSET; ale_params.ale_regs = ss_regs + CPSW2_ALE_OFFSET; @@ -1471,7 +1477,7 @@ static int cpsw_probe(struct platform_device *pdev) goto clean_irq_ret; } - if (cpts_register(&pdev->dev, &priv->cpts, + if (cpts_register(&pdev->dev, priv->cpts, data->cpts_clock_mult, data->cpts_clock_shift)) dev_err(priv->dev, "error registering cpts device\n"); @@ -1516,7 +1522,7 @@ static int cpsw_remove(struct platform_device *pdev) pr_info("removing device"); platform_set_drvdata(pdev, NULL); - cpts_unregister(&priv->cpts); + cpts_unregister(priv->cpts); free_irq(ndev->irq, priv); cpsw_ale_destroy(priv->ale); cpdma_chan_destroy(priv->txch); -- cgit v0.10.2 From d9ba8f9e6298af71ec1c1fd3d88c3ef68abd0ec3 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 11 Feb 2013 09:52:20 +0000 Subject: driver: net: ethernet: cpsw: dual emac interface implementation The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 6ddd028..ecfdf75 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -24,6 +24,8 @@ Required properties: Optional properties: - ti,hwmods : Must be "cpgmac0" - no_bd_ram : Must be 0 or 1 +- dual_emac : Specifies Switch to act as Dual EMAC +- dual_emac_res_vlan : Specifies VID to be used to segregate the ports Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 4b964bb..4ceed6e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -122,6 +122,10 @@ do { \ #define CPSW_VLAN_AWARE BIT(1) #define CPSW_ALE_VLAN_AWARE 1 +#define CPSW_FIFO_NORMAL_MODE (0 << 15) +#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15) +#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15) + #define cpsw_enable_irq(priv) \ do { \ u32 i; \ @@ -254,7 +258,7 @@ struct cpsw_ss_regs { struct cpsw_host_regs { u32 max_blks; u32 blk_cnt; - u32 flow_thresh; + u32 tx_in_ctl; u32 port_vlan; u32 tx_pri_map; u32 cpdma_tx_pri_map; @@ -281,6 +285,9 @@ struct cpsw_slave { u32 mac_control; struct cpsw_slave_data *data; struct phy_device *phy; + struct net_device *ndev; + u32 port_vlan; + u32 open_stat; }; static inline u32 slave_read(struct cpsw_slave *slave, u32 offset) @@ -320,15 +327,63 @@ struct cpsw_priv { u32 irqs_table[4]; u32 num_irqs; struct cpts *cpts; + u32 emac_port; }; #define napi_to_priv(napi) container_of(napi, struct cpsw_priv, napi) -#define for_each_slave(priv, func, arg...) \ - do { \ - int idx; \ - for (idx = 0; idx < (priv)->data.slaves; idx++) \ - (func)((priv)->slaves + idx, ##arg); \ +#define for_each_slave(priv, func, arg...) \ + do { \ + int idx; \ + if (priv->data.dual_emac) \ + (func)((priv)->slaves + priv->emac_port, ##arg);\ + else \ + for (idx = 0; idx < (priv)->data.slaves; idx++) \ + (func)((priv)->slaves + idx, ##arg); \ + } while (0) +#define cpsw_get_slave_ndev(priv, __slave_no__) \ + (priv->slaves[__slave_no__].ndev) +#define cpsw_get_slave_priv(priv, __slave_no__) \ + ((priv->slaves[__slave_no__].ndev) ? \ + netdev_priv(priv->slaves[__slave_no__].ndev) : NULL) \ + +#define cpsw_dual_emac_src_port_detect(status, priv, ndev, skb) \ + do { \ + if (!priv->data.dual_emac) \ + break; \ + if (CPDMA_RX_SOURCE_PORT(status) == 1) { \ + ndev = cpsw_get_slave_ndev(priv, 0); \ + priv = netdev_priv(ndev); \ + skb->dev = ndev; \ + } else if (CPDMA_RX_SOURCE_PORT(status) == 2) { \ + ndev = cpsw_get_slave_ndev(priv, 1); \ + priv = netdev_priv(ndev); \ + skb->dev = ndev; \ + } \ } while (0) +#define cpsw_add_mcast(priv, addr) \ + do { \ + if (priv->data.dual_emac) { \ + struct cpsw_slave *slave = priv->slaves + \ + priv->emac_port; \ + int slave_port = cpsw_get_slave_port(priv, \ + slave->slave_num); \ + cpsw_ale_add_mcast(priv->ale, addr, \ + 1 << slave_port | 1 << priv->host_port, \ + ALE_VLAN, slave->port_vlan, 0); \ + } else { \ + cpsw_ale_add_mcast(priv->ale, addr, \ + ALE_ALL_PORTS << priv->host_port, \ + 0, 0, 0); \ + } \ + } while (0) + +static inline int cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) +{ + if (priv->host_port == 0) + return slave_num + 1; + else + return slave_num; +} static void cpsw_ndo_set_rx_mode(struct net_device *ndev) { @@ -348,8 +403,7 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev) /* program multicast address list into ALE register */ netdev_for_each_mc_addr(ha, ndev) { - cpsw_ale_add_mcast(priv->ale, (u8 *)ha->addr, - ALE_ALL_PORTS << priv->host_port, 0, 0, 0); + cpsw_add_mcast(priv, (u8 *)ha->addr); } } } @@ -396,6 +450,8 @@ void cpsw_rx_handler(void *token, int len, int status) struct cpsw_priv *priv = netdev_priv(ndev); int ret = 0; + cpsw_dual_emac_src_port_detect(status, priv, ndev, skb); + /* free and bail if we are shutting down */ if (unlikely(!netif_running(ndev)) || unlikely(!netif_carrier_ok(ndev))) { @@ -437,18 +493,17 @@ static irqreturn_t cpsw_interrupt(int irq, void *dev_id) cpsw_intr_disable(priv); cpsw_disable_irq(priv); napi_schedule(&priv->napi); + } else { + priv = cpsw_get_slave_priv(priv, 1); + if (likely(priv) && likely(netif_running(priv->ndev))) { + cpsw_intr_disable(priv); + cpsw_disable_irq(priv); + napi_schedule(&priv->napi); + } } return IRQ_HANDLED; } -static inline int cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) -{ - if (priv->host_port == 0) - return slave_num + 1; - else - return slave_num; -} - static int cpsw_poll(struct napi_struct *napi, int budget) { struct cpsw_priv *priv = napi_to_priv(napi); @@ -566,6 +621,54 @@ static inline int __show_stat(char *buf, int maxlen, const char *name, u32 val) leader + strlen(name), val); } +static int cpsw_common_res_usage_state(struct cpsw_priv *priv) +{ + u32 i; + u32 usage_count = 0; + + if (!priv->data.dual_emac) + return 0; + + for (i = 0; i < priv->data.slaves; i++) + if (priv->slaves[i].open_stat) + usage_count++; + + return usage_count; +} + +static inline int cpsw_tx_packet_submit(struct net_device *ndev, + struct cpsw_priv *priv, struct sk_buff *skb) +{ + if (!priv->data.dual_emac) + return cpdma_chan_submit(priv->txch, skb, skb->data, + skb->len, 0, GFP_KERNEL); + + if (ndev == cpsw_get_slave_ndev(priv, 0)) + return cpdma_chan_submit(priv->txch, skb, skb->data, + skb->len, 1, GFP_KERNEL); + else + return cpdma_chan_submit(priv->txch, skb, skb->data, + skb->len, 2, GFP_KERNEL); +} + +static inline void cpsw_add_dual_emac_def_ale_entries( + struct cpsw_priv *priv, struct cpsw_slave *slave, + u32 slave_port) +{ + u32 port_mask = 1 << slave_port | 1 << priv->host_port; + + if (priv->version == CPSW_VERSION_1) + slave_write(slave, slave->port_vlan, CPSW1_PORT_VLAN); + else + slave_write(slave, slave->port_vlan, CPSW2_PORT_VLAN); + cpsw_ale_add_vlan(priv->ale, slave->port_vlan, port_mask, + port_mask, port_mask, 0); + cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, + port_mask, ALE_VLAN, slave->port_vlan, 0); + cpsw_ale_add_ucast(priv->ale, priv->mac_addr, + priv->host_port, ALE_VLAN, slave->port_vlan); +} + static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) { char name[32]; @@ -595,8 +698,11 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) slave_port = cpsw_get_slave_port(priv, slave->slave_num); - cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, - 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); + if (priv->data.dual_emac) + cpsw_add_dual_emac_def_ale_entries(priv, slave, slave_port); + else + cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, + 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); slave->phy = phy_connect(priv->ndev, slave->data->phy_id, &cpsw_adjust_link, slave->data->phy_if); @@ -634,6 +740,7 @@ static inline void cpsw_add_default_vlan(struct cpsw_priv *priv) static void cpsw_init_host_port(struct cpsw_priv *priv) { u32 control_reg; + u32 fifo_mode; /* soft reset the controller and initialize ale */ soft_reset("cpsw", &priv->regs->soft_reset); @@ -645,6 +752,9 @@ static void cpsw_init_host_port(struct cpsw_priv *priv) control_reg = readl(&priv->regs->control); control_reg |= CPSW_VLAN_AWARE; writel(control_reg, &priv->regs->control); + fifo_mode = (priv->data.dual_emac) ? CPSW_FIFO_DUAL_MAC_MODE : + CPSW_FIFO_NORMAL_MODE; + writel(fifo_mode, &priv->host_port_regs->tx_in_ctl); /* setup host port priority mapping */ __raw_writel(CPDMA_TX_PRIORITY_MAP, @@ -654,9 +764,12 @@ static void cpsw_init_host_port(struct cpsw_priv *priv) cpsw_ale_control_set(priv->ale, priv->host_port, ALE_PORT_STATE, ALE_PORT_STATE_FORWARD); - cpsw_ale_add_ucast(priv->ale, priv->mac_addr, priv->host_port, 0, 0); - cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, - 1 << priv->host_port, 0, 0, ALE_MCAST_FWD_2); + if (!priv->data.dual_emac) { + cpsw_ale_add_ucast(priv->ale, priv->mac_addr, priv->host_port, + 0, 0); + cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, + 1 << priv->host_port, 0, 0, ALE_MCAST_FWD_2); + } } static int cpsw_ndo_open(struct net_device *ndev) @@ -665,7 +778,8 @@ static int cpsw_ndo_open(struct net_device *ndev) int i, ret; u32 reg; - cpsw_intr_disable(priv); + if (!cpsw_common_res_usage_state(priv)) + cpsw_intr_disable(priv); netif_carrier_off(ndev); pm_runtime_get_sync(&priv->pdev->dev); @@ -677,46 +791,54 @@ static int cpsw_ndo_open(struct net_device *ndev) CPSW_RTL_VERSION(reg)); /* initialize host and slave ports */ - cpsw_init_host_port(priv); + if (!cpsw_common_res_usage_state(priv)) + cpsw_init_host_port(priv); for_each_slave(priv, cpsw_slave_open, priv); /* Add default VLAN */ - cpsw_add_default_vlan(priv); + if (!priv->data.dual_emac) + cpsw_add_default_vlan(priv); - /* setup tx dma to fixed prio and zero offset */ - cpdma_control_set(priv->dma, CPDMA_TX_PRIO_FIXED, 1); - cpdma_control_set(priv->dma, CPDMA_RX_BUFFER_OFFSET, 0); + if (!cpsw_common_res_usage_state(priv)) { + /* setup tx dma to fixed prio and zero offset */ + cpdma_control_set(priv->dma, CPDMA_TX_PRIO_FIXED, 1); + cpdma_control_set(priv->dma, CPDMA_RX_BUFFER_OFFSET, 0); - /* disable priority elevation and enable statistics on all ports */ - __raw_writel(0, &priv->regs->ptype); + /* disable priority elevation */ + __raw_writel(0, &priv->regs->ptype); - /* enable statistics collection only on the host port */ - __raw_writel(0x7, &priv->regs->stat_port_en); + /* enable statistics collection only on all ports */ + __raw_writel(0x7, &priv->regs->stat_port_en); - if (WARN_ON(!priv->data.rx_descs)) - priv->data.rx_descs = 128; + if (WARN_ON(!priv->data.rx_descs)) + priv->data.rx_descs = 128; - for (i = 0; i < priv->data.rx_descs; i++) { - struct sk_buff *skb; + for (i = 0; i < priv->data.rx_descs; i++) { + struct sk_buff *skb; - ret = -ENOMEM; - skb = netdev_alloc_skb_ip_align(priv->ndev, - priv->rx_packet_max); - if (!skb) - break; - ret = cpdma_chan_submit(priv->rxch, skb, skb->data, + ret = -ENOMEM; + skb = netdev_alloc_skb_ip_align(priv->ndev, + priv->rx_packet_max); + if (!skb) + break; + ret = cpdma_chan_submit(priv->rxch, skb, skb->data, skb_tailroom(skb), 0, GFP_KERNEL); - if (WARN_ON(ret < 0)) - break; + if (WARN_ON(ret < 0)) + break; + } + /* continue even if we didn't manage to submit all + * receive descs + */ + cpsw_info(priv, ifup, "submitted %d rx descriptors\n", i); } - /* continue even if we didn't manage to submit all receive descs */ - cpsw_info(priv, ifup, "submitted %d rx descriptors\n", i); cpdma_ctlr_start(priv->dma); cpsw_intr_enable(priv); napi_enable(&priv->napi); cpdma_ctlr_eoi(priv->dma); + if (priv->data.dual_emac) + priv->slaves[priv->emac_port].open_stat = true; return 0; } @@ -737,12 +859,17 @@ static int cpsw_ndo_stop(struct net_device *ndev) netif_stop_queue(priv->ndev); napi_disable(&priv->napi); netif_carrier_off(priv->ndev); - cpsw_intr_disable(priv); - cpdma_ctlr_int_ctrl(priv->dma, false); - cpdma_ctlr_stop(priv->dma); - cpsw_ale_stop(priv->ale); + + if (cpsw_common_res_usage_state(priv) <= 1) { + cpsw_intr_disable(priv); + cpdma_ctlr_int_ctrl(priv->dma, false); + cpdma_ctlr_stop(priv->dma); + cpsw_ale_stop(priv->ale); + } for_each_slave(priv, cpsw_slave_stop, priv); pm_runtime_put_sync(&priv->pdev->dev); + if (priv->data.dual_emac) + priv->slaves[priv->emac_port].open_stat = false; return 0; } @@ -766,8 +893,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, skb_tx_timestamp(skb); - ret = cpdma_chan_submit(priv->txch, skb, skb->data, - skb->len, 0, GFP_KERNEL); + ret = cpsw_tx_packet_submit(ndev, priv, skb); if (unlikely(ret != 0)) { cpsw_err(priv, tx_err, "desc submit failed\n"); goto fail; @@ -836,9 +962,14 @@ static void cpsw_hwtstamp_v1(struct cpsw_priv *priv) static void cpsw_hwtstamp_v2(struct cpsw_priv *priv) { - struct cpsw_slave *slave = &priv->slaves[priv->data.cpts_active_slave]; + struct cpsw_slave *slave; u32 ctrl, mtype; + if (priv->data.dual_emac) + slave = &priv->slaves[priv->emac_port]; + else + slave = &priv->slaves[priv->data.cpts_active_slave]; + ctrl = slave_read(slave, CPSW2_CONTROL); ctrl &= ~CTRL_ALL_TS_MASK; @@ -1124,6 +1255,7 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv, slave->data = data; slave->regs = regs + slave_reg_ofs; slave->sliver = regs + sliver_reg_ofs; + slave->port_vlan = data->dual_emac_res_vlan; } static int cpsw_probe_dt(struct cpsw_platform_data *data, @@ -1204,6 +1336,9 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } data->mac_control = prop; + if (!of_property_read_u32(node, "dual_emac", &prop)) + data->dual_emac = prop; + /* * Populate all the child nodes here... */ @@ -1237,6 +1372,18 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, if (mac_addr) memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN); + if (data->dual_emac) { + if (of_property_read_u32(node, "dual_emac_res_vlan", + &prop)) { + pr_err("Missing dual_emac_res_vlan in DT.\n"); + slave_data->dual_emac_res_vlan = i+1; + pr_err("Using %d as Reserved VLAN for %d slave\n", + slave_data->dual_emac_res_vlan, i); + } else { + slave_data->dual_emac_res_vlan = prop; + } + } + i++; } @@ -1247,6 +1394,79 @@ error_ret: return ret; } +static int cpsw_probe_dual_emac(struct platform_device *pdev, + struct cpsw_priv *priv) +{ + struct cpsw_platform_data *data = &priv->data; + struct net_device *ndev; + struct cpsw_priv *priv_sl2; + int ret = 0, i; + + ndev = alloc_etherdev(sizeof(struct cpsw_priv)); + if (!ndev) { + pr_err("cpsw: error allocating net_device\n"); + return -ENOMEM; + } + + priv_sl2 = netdev_priv(ndev); + spin_lock_init(&priv_sl2->lock); + priv_sl2->data = *data; + priv_sl2->pdev = pdev; + priv_sl2->ndev = ndev; + priv_sl2->dev = &ndev->dev; + priv_sl2->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG); + priv_sl2->rx_packet_max = max(rx_packet_max, 128); + + if (is_valid_ether_addr(data->slave_data[1].mac_addr)) { + memcpy(priv_sl2->mac_addr, data->slave_data[1].mac_addr, + ETH_ALEN); + pr_info("cpsw: Detected MACID = %pM\n", priv_sl2->mac_addr); + } else { + random_ether_addr(priv_sl2->mac_addr); + pr_info("cpsw: Random MACID = %pM\n", priv_sl2->mac_addr); + } + memcpy(ndev->dev_addr, priv_sl2->mac_addr, ETH_ALEN); + + priv_sl2->slaves = priv->slaves; + priv_sl2->clk = priv->clk; + + priv_sl2->cpsw_res = priv->cpsw_res; + priv_sl2->regs = priv->regs; + priv_sl2->host_port = priv->host_port; + priv_sl2->host_port_regs = priv->host_port_regs; + priv_sl2->wr_regs = priv->wr_regs; + priv_sl2->dma = priv->dma; + priv_sl2->txch = priv->txch; + priv_sl2->rxch = priv->rxch; + priv_sl2->ale = priv->ale; + priv_sl2->emac_port = 1; + priv->slaves[1].ndev = ndev; + priv_sl2->cpts = priv->cpts; + priv_sl2->version = priv->version; + + for (i = 0; i < priv->num_irqs; i++) { + priv_sl2->irqs_table[i] = priv->irqs_table[i]; + priv_sl2->num_irqs = priv->num_irqs; + } + + ndev->features |= NETIF_F_HW_VLAN_FILTER; + + ndev->netdev_ops = &cpsw_netdev_ops; + SET_ETHTOOL_OPS(ndev, &cpsw_ethtool_ops); + netif_napi_add(ndev, &priv_sl2->napi, cpsw_poll, CPSW_POLL_WEIGHT); + + /* register the network device */ + SET_NETDEV_DEV(ndev, &pdev->dev); + ret = register_netdev(ndev); + if (ret) { + pr_err("cpsw: error registering net device\n"); + free_netdev(ndev); + ret = -ENODEV; + } + + return ret; +} + static int cpsw_probe(struct platform_device *pdev) { struct cpsw_platform_data *data = pdev->dev.platform_data; @@ -1310,6 +1530,9 @@ static int cpsw_probe(struct platform_device *pdev) for (i = 0; i < data->slaves; i++) priv->slaves[i].slave_num = i; + priv->slaves[0].ndev = ndev; + priv->emac_port = 0; + priv->clk = clk_get(&pdev->dev, "fck"); if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "fck is not found\n"); @@ -1484,6 +1707,14 @@ static int cpsw_probe(struct platform_device *pdev) cpsw_notice(priv, probe, "initialized device (regs %x, irq %d)\n", priv->cpsw_res->start, ndev->irq); + if (priv->data.dual_emac) { + ret = cpsw_probe_dual_emac(pdev, priv); + if (ret) { + cpsw_err(priv, probe, "error probe slave 2 emac interface\n"); + goto clean_irq_ret; + } + } + return 0; clean_irq_ret: diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index e962cfd..798fb80 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -21,6 +21,8 @@ struct cpsw_slave_data { char phy_id[MII_BUS_ID_SIZE]; int phy_if; u8 mac_addr[ETH_ALEN]; + u16 dual_emac_res_vlan; /* Reserved VLAN for DualEMAC */ + }; struct cpsw_platform_data { @@ -36,6 +38,7 @@ struct cpsw_platform_data { u32 rx_descs; /* Number of Rx Descriptios */ u32 mac_control; /* Mac control register */ u16 default_vlan; /* Def VLAN for ALE lookup in VLAN aware mode*/ + bool dual_emac; /* Enable Dual EMAC mode */ }; #endif /* __CPSW_H__ */ -- cgit v0.10.2 From af32de0ecda35e933848090bbab490174504c731 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Tue, 12 Feb 2013 00:36:21 +0000 Subject: cxgb4vf: Fix VLAN extraction counter increment Signed-off-by: Santosh Rastapur Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 9e8841e1..9488032 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -1477,8 +1477,10 @@ static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl, skb->ip_summed = CHECKSUM_UNNECESSARY; skb_record_rx_queue(skb, rxq->rspq.idx); - if (pkt->vlan_ex) + if (pkt->vlan_ex) { __vlan_hwaccel_put_tag(skb, be16_to_cpu(pkt->vlan)); + rxq->stats.vlan_ex++; + } ret = napi_gro_frags(&rxq->rspq.napi); if (ret == GRO_HELD) -- cgit v0.10.2 From db98f081888cbdd995c7c4cfd407781da35e33ba Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 12 Feb 2013 03:05:38 +0000 Subject: net: fec_mpc52xx: Read MAC address from device-tree Until now, the MPC5200 FEC ethernet driver relied upon the bootloader (U-Boot) to write the MAC address into the ethernet controller registers. The Linux driver should not rely on such a thing. So lets read the MAC address from the DT as it should be done here. The following priority is now used to read the MAC address: 1) First, try OF node MAC address, if not present or invalid, then: 2) Read from MAC address registers, if invalid, then: 3) Log a warning message, and choose a random MAC address. This fixes a problem with a MPC5200 board that uses the SPL U-Boot version without FEC initialization before Linux booting for boot speedup. Additionally a status line is now be printed upon successful driver probing, also displaying this MAC address. Signed-off-by: Stefan Roese Cc: Anatolij Gustschin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c index 817d081..7f91b0c 100644 --- a/drivers/net/ethernet/freescale/fec_mpc52xx.c +++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -76,10 +77,6 @@ static void mpc52xx_fec_stop(struct net_device *dev); static void mpc52xx_fec_start(struct net_device *dev); static void mpc52xx_fec_reset(struct net_device *dev); -static u8 mpc52xx_fec_mac_addr[6]; -module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0); -MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe"); - #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \ NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP) static int debug = -1; /* the above default */ @@ -110,15 +107,6 @@ static void mpc52xx_fec_set_paddr(struct net_device *dev, u8 *mac) out_be32(&fec->paddr2, (*(u16 *)(&mac[4]) << 16) | FEC_PADDR2_TYPE); } -static void mpc52xx_fec_get_paddr(struct net_device *dev, u8 *mac) -{ - struct mpc52xx_fec_priv *priv = netdev_priv(dev); - struct mpc52xx_fec __iomem *fec = priv->fec; - - *(u32 *)(&mac[0]) = in_be32(&fec->paddr1); - *(u16 *)(&mac[4]) = in_be32(&fec->paddr2) >> 16; -} - static int mpc52xx_fec_set_mac_address(struct net_device *dev, void *addr) { struct sockaddr *sock = addr; @@ -853,6 +841,8 @@ static int mpc52xx_fec_probe(struct platform_device *op) struct resource mem; const u32 *prop; int prop_size; + struct device_node *np = op->dev.of_node; + const char *mac_addr; phys_addr_t rx_fifo; phys_addr_t tx_fifo; @@ -866,7 +856,7 @@ static int mpc52xx_fec_probe(struct platform_device *op) priv->ndev = ndev; /* Reserve FEC control zone */ - rv = of_address_to_resource(op->dev.of_node, 0, &mem); + rv = of_address_to_resource(np, 0, &mem); if (rv) { printk(KERN_ERR DRIVER_NAME ": " "Error while parsing device node resource\n" ); @@ -919,7 +909,7 @@ static int mpc52xx_fec_probe(struct platform_device *op) /* Get the IRQ we need one by one */ /* Control */ - ndev->irq = irq_of_parse_and_map(op->dev.of_node, 0); + ndev->irq = irq_of_parse_and_map(np, 0); /* RX */ priv->r_irq = bcom_get_task_irq(priv->rx_dmatsk); @@ -927,11 +917,33 @@ static int mpc52xx_fec_probe(struct platform_device *op) /* TX */ priv->t_irq = bcom_get_task_irq(priv->tx_dmatsk); - /* MAC address init */ - if (!is_zero_ether_addr(mpc52xx_fec_mac_addr)) - memcpy(ndev->dev_addr, mpc52xx_fec_mac_addr, 6); - else - mpc52xx_fec_get_paddr(ndev, ndev->dev_addr); + /* + * MAC address init: + * + * First try to read MAC address from DT + */ + mac_addr = of_get_mac_address(np); + if (mac_addr) { + memcpy(ndev->dev_addr, mac_addr, ETH_ALEN); + } else { + struct mpc52xx_fec __iomem *fec = priv->fec; + + /* + * If the MAC addresse is not provided via DT then read + * it back from the controller regs + */ + *(u32 *)(&ndev->dev_addr[0]) = in_be32(&fec->paddr1); + *(u16 *)(&ndev->dev_addr[4]) = in_be32(&fec->paddr2) >> 16; + } + + /* + * Check if the MAC address is valid, if not get a random one + */ + if (!is_valid_ether_addr(ndev->dev_addr)) { + eth_hw_addr_random(ndev); + dev_warn(&ndev->dev, "using random MAC address %pM\n", + ndev->dev_addr); + } priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT); @@ -942,20 +954,20 @@ static int mpc52xx_fec_probe(struct platform_device *op) /* Start with safe defaults for link connection */ priv->speed = 100; priv->duplex = DUPLEX_HALF; - priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->dev.of_node) >> 20) / 5) << 1; + priv->mdio_speed = ((mpc5xxx_get_bus_frequency(np) >> 20) / 5) << 1; /* The current speed preconfigures the speed of the MII link */ - prop = of_get_property(op->dev.of_node, "current-speed", &prop_size); + prop = of_get_property(np, "current-speed", &prop_size); if (prop && (prop_size >= sizeof(u32) * 2)) { priv->speed = prop[0]; priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF; } /* If there is a phy handle, then get the PHY node */ - priv->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0); + priv->phy_node = of_parse_phandle(np, "phy-handle", 0); /* the 7-wire property means don't use MII mode */ - if (of_find_property(op->dev.of_node, "fsl,7-wire-mode", NULL)) { + if (of_find_property(np, "fsl,7-wire-mode", NULL)) { priv->seven_wire_mode = 1; dev_info(&ndev->dev, "using 7-wire PHY mode\n"); } @@ -970,6 +982,8 @@ static int mpc52xx_fec_probe(struct platform_device *op) /* We're done ! */ dev_set_drvdata(&op->dev, ndev); + printk(KERN_INFO "%s: %s MAC %pM\n", + ndev->name, op->dev.of_node->full_name, ndev->dev_addr); return 0; -- cgit v0.10.2 From 442fad9423b78319e0019a7f5047eddf3317afbc Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 11 Feb 2013 23:22:38 +0000 Subject: netfilter: ctnetlink: don't permit ct creation with random tuple Userspace can cause kernel panic by not specifying orig/reply tuple: kernel will create a tuple with random stack values. Problem is that tuple.dst.dir will be random, too, which causes nf_ct_tuplehash_to_ctrack() to return garbage. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 627b0e5..a081915 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1705,6 +1705,9 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, if (nlh->nlmsg_flags & NLM_F_CREATE) { enum ip_conntrack_events events; + if (!cda[CTA_TUPLE_ORIG] || !cda[CTA_TUPLE_REPLY]) + return -EINVAL; + ct = ctnetlink_create_conntrack(net, zone, cda, &otuple, &rtuple, u3); if (IS_ERR(ct)) -- cgit v0.10.2 From 6e2f0aa8cf8892868bf2c19349cb5d7c407f690d Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 12 Feb 2013 05:59:53 +0000 Subject: netfilter: nf_ct_helper: don't discard helper if it is actually the same commit (32f5376 netfilter: nf_ct_helper: disable automatic helper re-assignment of different type) broke transparent proxy scenarios. For example, initial helper lookup might yield "ftp" (dport 21), while re-lookup after REDIRECT yields "ftp-2121". This causes the autoassign code to toss the ftp helper, even though these are just different instances of the same helper. Change the test to check for the helper function address instead of the helper address, as suggested by Pablo. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 884f2b3..91527d5 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -236,7 +236,9 @@ int __nf_ct_try_assign_helper(struct nf_conn *ct, struct nf_conn *tmpl, /* We only allow helper re-assignment of the same sort since * we cannot reallocate the helper extension area. */ - if (help->helper != helper) { + struct nf_conntrack_helper *tmp = rcu_dereference(help->helper); + + if (tmp && tmp->help != helper->help) { RCU_INIT_POINTER(help->helper, NULL); goto out; } -- cgit v0.10.2 From 324f5aa52814b3cc0b24eec071be2946dbca0e3a Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:11:59 +0000 Subject: htb: use PSCHED_TICKS2NS() Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 79e8ed4..14a83dc 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1512,8 +1512,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, htb_precompute_ratedata(&cl->rate); htb_precompute_ratedata(&cl->ceil); - cl->buffer = hopt->buffer << PSCHED_SHIFT; - cl->cbuffer = hopt->buffer << PSCHED_SHIFT; + cl->buffer = PSCHED_TICKS2NS(hopt->buffer); + cl->cbuffer = PSCHED_TICKS2NS(hopt->buffer); sch_tree_unlock(sch); -- cgit v0.10.2 From bdd6998b1e050f5589562e40aa852b626ee6fdea Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:01 +0000 Subject: htb: remove pointless first initialization of buffer and cbuffer These are initialized correctly a couple of lines later in the function. Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 14a83dc..547912e9 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1503,9 +1503,6 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - cl->buffer = hopt->buffer; - cl->cbuffer = hopt->cbuffer; - cl->rate.rate_bps = (u64)hopt->rate.rate << 3; cl->ceil.rate_bps = (u64)hopt->ceil.rate << 3; -- cgit v0.10.2 From b9a7afdefdf90dc9e64902b2565170b8b017aa75 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:02 +0000 Subject: htb: initialize cl->tokens and cl->ctokens correctly These are in ns so convert from ticks to ns. Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 547912e9..2b22544 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1459,8 +1459,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->parent = parent; /* set class to be in HTB_CAN_SEND state */ - cl->tokens = hopt->buffer; - cl->ctokens = hopt->cbuffer; + cl->tokens = PSCHED_TICKS2NS(hopt->buffer); + cl->ctokens = PSCHED_TICKS2NS(hopt->cbuffer); cl->mbuffer = 60 * PSCHED_TICKS_PER_SEC; /* 1min */ cl->t_c = psched_get_time(); cl->cmode = HTB_CAN_SEND; -- cgit v0.10.2 From 292f1c7ff6cc10516076ceeea45ed11833bb71c7 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:03 +0000 Subject: sch: make htb_rate_cfg and functions around that generic As it is going to be used in tbf as well, push these to generic code. Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index 2d06c2a..2761c90 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -679,4 +679,23 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask, } #endif +struct psched_ratecfg { + u64 rate_bps; + u32 mult; + u32 shift; +}; + +static inline u64 psched_l2t_ns(const struct psched_ratecfg *r, + unsigned int len) +{ + return ((u64)len * r->mult) >> r->shift; +} + +extern void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate); + +static inline u32 psched_ratecfg_getrate(const struct psched_ratecfg *r) +{ + return r->rate_bps >> 3; +} + #endif diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 5d81a44..ffad481 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -896,3 +897,39 @@ void dev_shutdown(struct net_device *dev) WARN_ON(timer_pending(&dev->watchdog_timer)); } + +void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) +{ + u64 factor; + u64 mult; + int shift; + + r->rate_bps = rate << 3; + r->shift = 0; + r->mult = 1; + /* + * Calibrate mult, shift so that token counting is accurate + * for smallest packet size (64 bytes). Token (time in ns) is + * computed as (bytes * 8) * NSEC_PER_SEC / rate_bps. It will + * work as long as the smallest packet transfer time can be + * accurately represented in nanosec. + */ + if (r->rate_bps > 0) { + /* + * Higher shift gives better accuracy. Find the largest + * shift such that mult fits in 32 bits. + */ + for (shift = 0; shift < 16; shift++) { + r->shift = shift; + factor = 8LLU * NSEC_PER_SEC * (1 << r->shift); + mult = div64_u64(factor, r->rate_bps); + if (mult > UINT_MAX) + break; + } + + r->shift = shift - 1; + factor = 8LLU * NSEC_PER_SEC * (1 << r->shift); + r->mult = div64_u64(factor, r->rate_bps); + } +} +EXPORT_SYMBOL(psched_ratecfg_precompute); diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 2b22544..03c2692 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -38,6 +38,7 @@ #include #include #include +#include #include /* HTB algorithm. @@ -71,12 +72,6 @@ enum htb_cmode { HTB_CAN_SEND /* class can send */ }; -struct htb_rate_cfg { - u64 rate_bps; - u32 mult; - u32 shift; -}; - /* interior & leaf nodes; props specific to leaves are marked L: */ struct htb_class { struct Qdisc_class_common common; @@ -124,8 +119,8 @@ struct htb_class { int filter_cnt; /* token bucket parameters */ - struct htb_rate_cfg rate; - struct htb_rate_cfg ceil; + struct psched_ratecfg rate; + struct psched_ratecfg ceil; s64 buffer, cbuffer; /* token bucket depth/rate */ psched_tdiff_t mbuffer; /* max wait time */ s64 tokens, ctokens; /* current number of tokens */ @@ -168,45 +163,6 @@ struct htb_sched { struct work_struct work; }; -static u64 l2t_ns(struct htb_rate_cfg *r, unsigned int len) -{ - return ((u64)len * r->mult) >> r->shift; -} - -static void htb_precompute_ratedata(struct htb_rate_cfg *r) -{ - u64 factor; - u64 mult; - int shift; - - r->shift = 0; - r->mult = 1; - /* - * Calibrate mult, shift so that token counting is accurate - * for smallest packet size (64 bytes). Token (time in ns) is - * computed as (bytes * 8) * NSEC_PER_SEC / rate_bps. It will - * work as long as the smallest packet transfer time can be - * accurately represented in nanosec. - */ - if (r->rate_bps > 0) { - /* - * Higher shift gives better accuracy. Find the largest - * shift such that mult fits in 32 bits. - */ - for (shift = 0; shift < 16; shift++) { - r->shift = shift; - factor = 8LLU * NSEC_PER_SEC * (1 << r->shift); - mult = div64_u64(factor, r->rate_bps); - if (mult > UINT_MAX) - break; - } - - r->shift = shift - 1; - factor = 8LLU * NSEC_PER_SEC * (1 << r->shift); - r->mult = div64_u64(factor, r->rate_bps); - } -} - /* find class in global hash table using given handle */ static inline struct htb_class *htb_find(u32 handle, struct Qdisc *sch) { @@ -632,7 +588,7 @@ static inline void htb_accnt_tokens(struct htb_class *cl, int bytes, s64 diff) if (toks > cl->buffer) toks = cl->buffer; - toks -= (s64) l2t_ns(&cl->rate, bytes); + toks -= (s64) psched_l2t_ns(&cl->rate, bytes); if (toks <= -cl->mbuffer) toks = 1 - cl->mbuffer; @@ -645,7 +601,7 @@ static inline void htb_accnt_ctokens(struct htb_class *cl, int bytes, s64 diff) if (toks > cl->cbuffer) toks = cl->cbuffer; - toks -= (s64) l2t_ns(&cl->ceil, bytes); + toks -= (s64) psched_l2t_ns(&cl->ceil, bytes); if (toks <= -cl->mbuffer) toks = 1 - cl->mbuffer; @@ -1134,9 +1090,9 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg, memset(&opt, 0, sizeof(opt)); - opt.rate.rate = cl->rate.rate_bps >> 3; + opt.rate.rate = psched_ratecfg_getrate(&cl->rate); opt.buffer = PSCHED_NS2TICKS(cl->buffer); - opt.ceil.rate = cl->ceil.rate_bps >> 3; + opt.ceil.rate = psched_ratecfg_getrate(&cl->ceil); opt.cbuffer = PSCHED_NS2TICKS(cl->cbuffer); opt.quantum = cl->quantum; opt.prio = cl->prio; @@ -1503,11 +1459,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - cl->rate.rate_bps = (u64)hopt->rate.rate << 3; - cl->ceil.rate_bps = (u64)hopt->ceil.rate << 3; - - htb_precompute_ratedata(&cl->rate); - htb_precompute_ratedata(&cl->ceil); + psched_ratecfg_precompute(&cl->rate, hopt->rate.rate); + psched_ratecfg_precompute(&cl->ceil, hopt->ceil.rate); cl->buffer = PSCHED_TICKS2NS(hopt->buffer); cl->cbuffer = PSCHED_TICKS2NS(hopt->buffer); -- cgit v0.10.2 From 34c5d292ce05d2bf52e692c44292b0ababba2853 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:04 +0000 Subject: sch_api: introduce qdisc_watchdog_schedule_ns() tbf will need to schedule watchdog in ns. No need to convert it twice. Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 66f5ac3..388bf8b 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -65,8 +65,14 @@ struct qdisc_watchdog { }; extern void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc); -extern void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, - psched_time_t expires); +extern void qdisc_watchdog_schedule_ns(struct qdisc_watchdog *wd, u64 expires); + +static inline void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, + psched_time_t expires) +{ + qdisc_watchdog_schedule_ns(wd, PSCHED_TICKS2NS(expires)); +} + extern void qdisc_watchdog_cancel(struct qdisc_watchdog *wd); extern struct Qdisc_ops pfifo_qdisc_ops; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index d84f7e7..fe1ba54 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -493,7 +493,7 @@ void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc) } EXPORT_SYMBOL(qdisc_watchdog_init); -void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires) +void qdisc_watchdog_schedule_ns(struct qdisc_watchdog *wd, u64 expires) { if (test_bit(__QDISC_STATE_DEACTIVATED, &qdisc_root_sleeping(wd->qdisc)->state)) @@ -502,10 +502,10 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires) qdisc_throttled(wd->qdisc); hrtimer_start(&wd->timer, - ns_to_ktime(PSCHED_TICKS2NS(expires)), + ns_to_ktime(expires), HRTIMER_MODE_ABS); } -EXPORT_SYMBOL(qdisc_watchdog_schedule); +EXPORT_SYMBOL(qdisc_watchdog_schedule_ns); void qdisc_watchdog_cancel(struct qdisc_watchdog *wd) { -- cgit v0.10.2 From b757c9336d63f94c6b57532bb4e8651d8b28786f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:05 +0000 Subject: tbf: improved accuracy at high rates Current TBF uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This is a followup to 56b765b79e9a78dc7d3f8850ba5e5567205a3ecd ("htb: improved accuracy at high rates"). Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index 4b056c15..c8388f3 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -19,6 +19,7 @@ #include #include #include +#include #include @@ -100,23 +101,21 @@ struct tbf_sched_data { /* Parameters */ u32 limit; /* Maximal length of backlog: bytes */ - u32 buffer; /* Token bucket depth/rate: MUST BE >= MTU/B */ - u32 mtu; + s64 buffer; /* Token bucket depth/rate: MUST BE >= MTU/B */ + s64 mtu; u32 max_size; - struct qdisc_rate_table *R_tab; - struct qdisc_rate_table *P_tab; + struct psched_ratecfg rate; + struct psched_ratecfg peak; + bool peak_present; /* Variables */ - long tokens; /* Current number of B tokens */ - long ptokens; /* Current number of P tokens */ - psched_time_t t_c; /* Time check-point */ + s64 tokens; /* Current number of B tokens */ + s64 ptokens; /* Current number of P tokens */ + s64 t_c; /* Time check-point */ struct Qdisc *qdisc; /* Inner qdisc, default - bfifo queue */ struct qdisc_watchdog watchdog; /* Watchdog timer */ }; -#define L2T(q, L) qdisc_l2t((q)->R_tab, L) -#define L2T_P(q, L) qdisc_l2t((q)->P_tab, L) - static int tbf_enqueue(struct sk_buff *skb, struct Qdisc *sch) { struct tbf_sched_data *q = qdisc_priv(sch); @@ -156,24 +155,24 @@ static struct sk_buff *tbf_dequeue(struct Qdisc *sch) skb = q->qdisc->ops->peek(q->qdisc); if (skb) { - psched_time_t now; - long toks; - long ptoks = 0; + s64 now; + s64 toks; + s64 ptoks = 0; unsigned int len = qdisc_pkt_len(skb); - now = psched_get_time(); - toks = psched_tdiff_bounded(now, q->t_c, q->buffer); + now = ktime_to_ns(ktime_get()); + toks = min_t(s64, now - q->t_c, q->buffer); - if (q->P_tab) { + if (q->peak_present) { ptoks = toks + q->ptokens; - if (ptoks > (long)q->mtu) + if (ptoks > q->mtu) ptoks = q->mtu; - ptoks -= L2T_P(q, len); + ptoks -= (s64) psched_l2t_ns(&q->peak, len); } toks += q->tokens; - if (toks > (long)q->buffer) + if (toks > q->buffer) toks = q->buffer; - toks -= L2T(q, len); + toks -= (s64) psched_l2t_ns(&q->rate, len); if ((toks|ptoks) >= 0) { skb = qdisc_dequeue_peeked(q->qdisc); @@ -189,8 +188,8 @@ static struct sk_buff *tbf_dequeue(struct Qdisc *sch) return skb; } - qdisc_watchdog_schedule(&q->watchdog, - now + max_t(long, -toks, -ptoks)); + qdisc_watchdog_schedule_ns(&q->watchdog, + now + max_t(long, -toks, -ptoks)); /* Maybe we have a shorter packet in the queue, which can be sent now. It sounds cool, @@ -214,7 +213,7 @@ static void tbf_reset(struct Qdisc *sch) qdisc_reset(q->qdisc); sch->q.qlen = 0; - q->t_c = psched_get_time(); + q->t_c = ktime_to_ns(ktime_get()); q->tokens = q->buffer; q->ptokens = q->mtu; qdisc_watchdog_cancel(&q->watchdog); @@ -293,14 +292,19 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) q->qdisc = child; } q->limit = qopt->limit; - q->mtu = qopt->mtu; + q->mtu = PSCHED_TICKS2NS(qopt->mtu); q->max_size = max_size; - q->buffer = qopt->buffer; + q->buffer = PSCHED_TICKS2NS(qopt->buffer); q->tokens = q->buffer; q->ptokens = q->mtu; - swap(q->R_tab, rtab); - swap(q->P_tab, ptab); + psched_ratecfg_precompute(&q->rate, rtab->rate.rate); + if (ptab) { + psched_ratecfg_precompute(&q->peak, ptab->rate.rate); + q->peak_present = true; + } else { + q->peak_present = false; + } sch_tree_unlock(sch); err = 0; @@ -319,7 +323,7 @@ static int tbf_init(struct Qdisc *sch, struct nlattr *opt) if (opt == NULL) return -EINVAL; - q->t_c = psched_get_time(); + q->t_c = ktime_to_ns(ktime_get()); qdisc_watchdog_init(&q->watchdog, sch); q->qdisc = &noop_qdisc; @@ -331,12 +335,6 @@ static void tbf_destroy(struct Qdisc *sch) struct tbf_sched_data *q = qdisc_priv(sch); qdisc_watchdog_cancel(&q->watchdog); - - if (q->P_tab) - qdisc_put_rtab(q->P_tab); - if (q->R_tab) - qdisc_put_rtab(q->R_tab); - qdisc_destroy(q->qdisc); } @@ -352,13 +350,13 @@ static int tbf_dump(struct Qdisc *sch, struct sk_buff *skb) goto nla_put_failure; opt.limit = q->limit; - opt.rate = q->R_tab->rate; - if (q->P_tab) - opt.peakrate = q->P_tab->rate; + opt.rate.rate = psched_ratecfg_getrate(&q->rate); + if (q->peak_present) + opt.peakrate.rate = psched_ratecfg_getrate(&q->peak); else memset(&opt.peakrate, 0, sizeof(opt.peakrate)); - opt.mtu = q->mtu; - opt.buffer = q->buffer; + opt.mtu = PSCHED_NS2TICKS(q->mtu); + opt.buffer = PSCHED_NS2TICKS(q->buffer); if (nla_put(skb, TCA_TBF_PARMS, sizeof(opt), &opt)) goto nla_put_failure; -- cgit v0.10.2 From 0e243218bac42ebd0a9c19ceb0003410d302d008 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:06 +0000 Subject: act_police: move struct tcf_police to act_police.c It's not used anywhere else, so move it. Signed-off-by: Jiri Pirko Acked-by: Jamal Hadi Salim Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/act_api.h b/include/net/act_api.h index 112c25c..06ef7e9 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -35,21 +35,6 @@ struct tcf_common { #define tcf_lock common.tcfc_lock #define tcf_rcu common.tcfc_rcu -struct tcf_police { - struct tcf_common common; - int tcfp_result; - u32 tcfp_ewma_rate; - u32 tcfp_burst; - u32 tcfp_mtu; - u32 tcfp_toks; - u32 tcfp_ptoks; - psched_time_t tcfp_t_c; - struct qdisc_rate_table *tcfp_R_tab; - struct qdisc_rate_table *tcfp_P_tab; -}; -#define to_police(pc) \ - container_of(pc, struct tcf_police, common) - struct tcf_hashinfo { struct tcf_common **htab; unsigned int hmask; diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 8dbd695..378a649 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -22,6 +22,21 @@ #include #include +struct tcf_police { + struct tcf_common common; + int tcfp_result; + u32 tcfp_ewma_rate; + u32 tcfp_burst; + u32 tcfp_mtu; + u32 tcfp_toks; + u32 tcfp_ptoks; + psched_time_t tcfp_t_c; + struct qdisc_rate_table *tcfp_R_tab; + struct qdisc_rate_table *tcfp_P_tab; +}; +#define to_police(pc) \ + container_of(pc, struct tcf_police, common) + #define L2T(p, L) qdisc_l2t((p)->tcfp_R_tab, L) #define L2T_P(p, L) qdisc_l2t((p)->tcfp_P_tab, L) -- cgit v0.10.2 From c6d14ff11bec4c02601be198c84a5c76d1af90fc Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 12 Feb 2013 00:12:07 +0000 Subject: act_police: improved accuracy at high rates Current act_police uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This is a followup to 56b765b79e9a78dc7d3f8850ba5e5567205a3ecd ("htb: improved accuracy at high rates"). Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 378a649..823463a 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -26,20 +26,20 @@ struct tcf_police { struct tcf_common common; int tcfp_result; u32 tcfp_ewma_rate; - u32 tcfp_burst; + s64 tcfp_burst; u32 tcfp_mtu; - u32 tcfp_toks; - u32 tcfp_ptoks; - psched_time_t tcfp_t_c; - struct qdisc_rate_table *tcfp_R_tab; - struct qdisc_rate_table *tcfp_P_tab; + s64 tcfp_toks; + s64 tcfp_ptoks; + s64 tcfp_mtu_ptoks; + s64 tcfp_t_c; + struct psched_ratecfg rate; + bool rate_present; + struct psched_ratecfg peak; + bool peak_present; }; #define to_police(pc) \ container_of(pc, struct tcf_police, common) -#define L2T(p, L) qdisc_l2t((p)->tcfp_R_tab, L) -#define L2T_P(p, L) qdisc_l2t((p)->tcfp_P_tab, L) - #define POL_TAB_MASK 15 static struct tcf_common *tcf_police_ht[POL_TAB_MASK + 1]; static u32 police_idx_gen; @@ -123,10 +123,6 @@ static void tcf_police_destroy(struct tcf_police *p) write_unlock_bh(&police_lock); gen_kill_estimator(&p->tcf_bstats, &p->tcf_rate_est); - if (p->tcfp_R_tab) - qdisc_put_rtab(p->tcfp_R_tab); - if (p->tcfp_P_tab) - qdisc_put_rtab(p->tcfp_P_tab); /* * gen_estimator est_timer() might access p->tcf_lock * or bstats, wait a RCU grace period before freeing p @@ -227,26 +223,36 @@ override: } /* No failure allowed after this point */ - if (R_tab != NULL) { - qdisc_put_rtab(police->tcfp_R_tab); - police->tcfp_R_tab = R_tab; + police->tcfp_mtu = parm->mtu; + if (police->tcfp_mtu == 0) { + police->tcfp_mtu = ~0; + if (R_tab) + police->tcfp_mtu = 255 << R_tab->rate.cell_log; + } + if (R_tab) { + police->rate_present = true; + psched_ratecfg_precompute(&police->rate, R_tab->rate.rate); + qdisc_put_rtab(R_tab); + } else { + police->rate_present = false; } - if (P_tab != NULL) { - qdisc_put_rtab(police->tcfp_P_tab); - police->tcfp_P_tab = P_tab; + if (P_tab) { + police->peak_present = true; + psched_ratecfg_precompute(&police->peak, P_tab->rate.rate); + qdisc_put_rtab(P_tab); + } else { + police->peak_present = false; } if (tb[TCA_POLICE_RESULT]) police->tcfp_result = nla_get_u32(tb[TCA_POLICE_RESULT]); - police->tcfp_toks = police->tcfp_burst = parm->burst; - police->tcfp_mtu = parm->mtu; - if (police->tcfp_mtu == 0) { - police->tcfp_mtu = ~0; - if (police->tcfp_R_tab) - police->tcfp_mtu = 255<tcfp_R_tab->rate.cell_log; + police->tcfp_burst = PSCHED_TICKS2NS(parm->burst); + police->tcfp_toks = police->tcfp_burst; + if (police->peak_present) { + police->tcfp_mtu_ptoks = (s64) psched_l2t_ns(&police->peak, + police->tcfp_mtu); + police->tcfp_ptoks = police->tcfp_mtu_ptoks; } - if (police->tcfp_P_tab) - police->tcfp_ptoks = L2T_P(police, police->tcfp_mtu); police->tcf_action = parm->action; if (tb[TCA_POLICE_AVRATE]) @@ -256,7 +262,7 @@ override: if (ret != ACT_P_CREATED) return ret; - police->tcfp_t_c = psched_get_time(); + police->tcfp_t_c = ktime_to_ns(ktime_get()); police->tcf_index = parm->index ? parm->index : tcf_hash_new_index(&police_idx_gen, &police_hash_info); h = tcf_hash(police->tcf_index, POL_TAB_MASK); @@ -302,9 +308,9 @@ static int tcf_act_police(struct sk_buff *skb, const struct tc_action *a, struct tcf_result *res) { struct tcf_police *police = a->priv; - psched_time_t now; - long toks; - long ptoks = 0; + s64 now; + s64 toks; + s64 ptoks = 0; spin_lock(&police->tcf_lock); @@ -320,24 +326,25 @@ static int tcf_act_police(struct sk_buff *skb, const struct tc_action *a, } if (qdisc_pkt_len(skb) <= police->tcfp_mtu) { - if (police->tcfp_R_tab == NULL) { + if (!police->rate_present) { spin_unlock(&police->tcf_lock); return police->tcfp_result; } - now = psched_get_time(); - toks = psched_tdiff_bounded(now, police->tcfp_t_c, - police->tcfp_burst); - if (police->tcfp_P_tab) { + now = ktime_to_ns(ktime_get()); + toks = min_t(s64, now - police->tcfp_t_c, + police->tcfp_burst); + if (police->peak_present) { ptoks = toks + police->tcfp_ptoks; - if (ptoks > (long)L2T_P(police, police->tcfp_mtu)) - ptoks = (long)L2T_P(police, police->tcfp_mtu); - ptoks -= L2T_P(police, qdisc_pkt_len(skb)); + if (ptoks > police->tcfp_mtu_ptoks) + ptoks = police->tcfp_mtu_ptoks; + ptoks -= (s64) psched_l2t_ns(&police->peak, + qdisc_pkt_len(skb)); } toks += police->tcfp_toks; - if (toks > (long)police->tcfp_burst) + if (toks > police->tcfp_burst) toks = police->tcfp_burst; - toks -= L2T(police, qdisc_pkt_len(skb)); + toks -= (s64) psched_l2t_ns(&police->rate, qdisc_pkt_len(skb)); if ((toks|ptoks) >= 0) { police->tcfp_t_c = now; police->tcfp_toks = toks; @@ -363,15 +370,15 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) .index = police->tcf_index, .action = police->tcf_action, .mtu = police->tcfp_mtu, - .burst = police->tcfp_burst, + .burst = PSCHED_NS2TICKS(police->tcfp_burst), .refcnt = police->tcf_refcnt - ref, .bindcnt = police->tcf_bindcnt - bind, }; - if (police->tcfp_R_tab) - opt.rate = police->tcfp_R_tab->rate; - if (police->tcfp_P_tab) - opt.peakrate = police->tcfp_P_tab->rate; + if (police->rate_present) + opt.rate.rate = psched_ratecfg_getrate(&police->rate); + if (police->peak_present) + opt.peakrate.rate = psched_ratecfg_getrate(&police->peak); if (nla_put(skb, TCA_POLICE_TBF, sizeof(opt), &opt)) goto nla_put_failure; if (police->tcfp_result && -- cgit v0.10.2 From 68719786cba169f93b6cb5a53f5dd6ea1bdbb9f3 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 12 Feb 2013 15:28:35 -0500 Subject: gianfar: remove largely unused gfar_stats struct The gfar_stats struct is only used in copying out data via ethtool. It is declared as the extra stats, followed by the rmon stats. However, the rmon stats are never actually ever used in the driver; instead the rmon data is a u32 register read that is cast directly into the ethtool buf. It seems the only reason rmon is in the struct at all is to give the offset(s) at which it should be exported into the ethtool buffer. But note gfar_stats doesn't contain a gfar_extra_stats as a substruct -- instead it contains a u64 array of equal element count. This implicitly means we have two independent declarations of what gfar_extra_stats really is. Rather than have this duality, we already have defines which give us the offset directly, and hence do not need the struct at all. Further, since we know the extra_stats is unconditionally always present, we can write it out to the ethtool buf 1st, and then optionally write out the rmon data. There is no need for two independent loops, both of which are simply copying out the extra_stats to buf offset zero. This also helps pave the way towards allowing the extra stats fields to be converted to atomic64_t values, without having their types directly influencing the ethtool stats export code (gfar_fill_stats) that expects to deal with u64. Signed-off-by: Paul Gortmaker diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 71793f4..61b1785 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -646,15 +646,9 @@ struct gfar_extra_stats { #define GFAR_RMON_LEN ((sizeof(struct rmon_mib) - 16)/sizeof(u32)) #define GFAR_EXTRA_STATS_LEN (sizeof(struct gfar_extra_stats)/sizeof(u64)) -/* Number of stats in the stats structure (ignore car and cam regs)*/ +/* Number of stats exported via ethtool */ #define GFAR_STATS_LEN (GFAR_RMON_LEN + GFAR_EXTRA_STATS_LEN) -struct gfar_stats { - u64 extra[GFAR_EXTRA_STATS_LEN]; - u64 rmon[GFAR_RMON_LEN]; -}; - - struct gfar { u32 tsec_id; /* 0x.000 - Controller ID register */ u32 tsec_id2; /* 0x.004 - Controller ID2 register */ diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 45e59d5..172acb9 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -151,18 +151,15 @@ static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, struct gfar __iomem *regs = priv->gfargrp[0].regs; u64 *extra = (u64 *) & priv->extra_stats; + for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) + buf[i] = extra[i]; + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { u32 __iomem *rmon = (u32 __iomem *) ®s->rmon; - struct gfar_stats *stats = (struct gfar_stats *) buf; - - for (i = 0; i < GFAR_RMON_LEN; i++) - stats->rmon[i] = (u64) gfar_read(&rmon[i]); - for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) - stats->extra[i] = extra[i]; - } else - for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) - buf[i] = extra[i]; + for (; i < GFAR_STATS_LEN; i++, rmon++) + buf[i] = (u64) gfar_read(rmon); + } } static int gfar_sset_count(struct net_device *dev, int sset) -- cgit v0.10.2 From 212079df6d77c0daada96b1d906f4b7749871411 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 12 Feb 2013 15:38:19 -0500 Subject: gianfar: convert u64 status counters to atomic64_t While looking at some asm dump for an unrelated change, Eric noticed in the following stats count increment code: 50b8: 81 3c 01 f8 lwz r9,504(r28) 50bc: 81 5c 01 fc lwz r10,508(r28) 50c0: 31 4a 00 01 addic r10,r10,1 50c4: 7d 29 01 94 addze r9,r9 50c8: 91 3c 01 f8 stw r9,504(r28) 50cc: 91 5c 01 fc stw r10,508(r28) that a 64 bit counter was used on ppc-32 without sync and hence the "ethtool -S" output was racy. Here we convert all the values to use atomic64_t so that the output will always be consistent. Reported-by: Eric Dumazet Signed-off-by: Paul Gortmaker diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index ab32bd0..c82f677 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2648,7 +2648,7 @@ static inline void count_errors(unsigned short status, struct net_device *dev) if (status & RXBD_TRUNCATED) { stats->rx_length_errors++; - estats->rx_trunc++; + atomic64_inc(&estats->rx_trunc); return; } @@ -2657,20 +2657,20 @@ static inline void count_errors(unsigned short status, struct net_device *dev) stats->rx_length_errors++; if (status & RXBD_LARGE) - estats->rx_large++; + atomic64_inc(&estats->rx_large); else - estats->rx_short++; + atomic64_inc(&estats->rx_short); } if (status & RXBD_NONOCTET) { stats->rx_frame_errors++; - estats->rx_nonoctet++; + atomic64_inc(&estats->rx_nonoctet); } if (status & RXBD_CRCERR) { - estats->rx_crcerr++; + atomic64_inc(&estats->rx_crcerr); stats->rx_crc_errors++; } if (status & RXBD_OVERRUN) { - estats->rx_overrun++; + atomic64_inc(&estats->rx_overrun); stats->rx_crc_errors++; } } @@ -2744,7 +2744,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, ret = napi_gro_receive(napi, skb); if (GRO_DROP == ret) - priv->extra_stats.kernel_dropped++; + atomic64_inc(&priv->extra_stats.kernel_dropped); return 0; } @@ -2812,7 +2812,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) } else { netif_warn(priv, rx_err, dev, "Missing skb!\n"); rx_queue->stats.rx_dropped++; - priv->extra_stats.rx_skbmissing++; + atomic64_inc(&priv->extra_stats.rx_skbmissing); } } @@ -3245,7 +3245,7 @@ static irqreturn_t gfar_error(int irq, void *grp_id) netif_dbg(priv, tx_err, dev, "TX FIFO underrun, packet dropped\n"); dev->stats.tx_dropped++; - priv->extra_stats.tx_underrun++; + atomic64_inc(&priv->extra_stats.tx_underrun); local_irq_save(flags); lock_tx_qs(priv); @@ -3260,7 +3260,7 @@ static irqreturn_t gfar_error(int irq, void *grp_id) } if (events & IEVENT_BSY) { dev->stats.rx_errors++; - priv->extra_stats.rx_bsy++; + atomic64_inc(&priv->extra_stats.rx_bsy); gfar_receive(irq, grp_id); @@ -3269,19 +3269,19 @@ static irqreturn_t gfar_error(int irq, void *grp_id) } if (events & IEVENT_BABR) { dev->stats.rx_errors++; - priv->extra_stats.rx_babr++; + atomic64_inc(&priv->extra_stats.rx_babr); netif_dbg(priv, rx_err, dev, "babbling RX error\n"); } if (events & IEVENT_EBERR) { - priv->extra_stats.eberr++; + atomic64_inc(&priv->extra_stats.eberr); netif_dbg(priv, rx_err, dev, "bus error\n"); } if (events & IEVENT_RXC) netif_dbg(priv, rx_status, dev, "control frame\n"); if (events & IEVENT_BABT) { - priv->extra_stats.tx_babt++; + atomic64_inc(&priv->extra_stats.tx_babt); netif_dbg(priv, tx_err, dev, "babbling TX error\n"); } return IRQ_HANDLED; diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 61b1785..78125f1 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -627,24 +627,25 @@ struct rmon_mib }; struct gfar_extra_stats { - u64 kernel_dropped; - u64 rx_large; - u64 rx_short; - u64 rx_nonoctet; - u64 rx_crcerr; - u64 rx_overrun; - u64 rx_bsy; - u64 rx_babr; - u64 rx_trunc; - u64 eberr; - u64 tx_babt; - u64 tx_underrun; - u64 rx_skbmissing; - u64 tx_timeout; + atomic64_t kernel_dropped; + atomic64_t rx_large; + atomic64_t rx_short; + atomic64_t rx_nonoctet; + atomic64_t rx_crcerr; + atomic64_t rx_overrun; + atomic64_t rx_bsy; + atomic64_t rx_babr; + atomic64_t rx_trunc; + atomic64_t eberr; + atomic64_t tx_babt; + atomic64_t tx_underrun; + atomic64_t rx_skbmissing; + atomic64_t tx_timeout; }; #define GFAR_RMON_LEN ((sizeof(struct rmon_mib) - 16)/sizeof(u32)) -#define GFAR_EXTRA_STATS_LEN (sizeof(struct gfar_extra_stats)/sizeof(u64)) +#define GFAR_EXTRA_STATS_LEN \ + (sizeof(struct gfar_extra_stats)/sizeof(atomic64_t)) /* Number of stats exported via ethtool */ #define GFAR_STATS_LEN (GFAR_RMON_LEN + GFAR_EXTRA_STATS_LEN) diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 172acb9..75e89ac 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -149,10 +149,10 @@ static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, int i; struct gfar_private *priv = netdev_priv(dev); struct gfar __iomem *regs = priv->gfargrp[0].regs; - u64 *extra = (u64 *) & priv->extra_stats; + atomic64_t *extra = (atomic64_t *)&priv->extra_stats; for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) - buf[i] = extra[i]; + buf[i] = atomic64_read(&extra[i]); if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { u32 __iomem *rmon = (u32 __iomem *) ®s->rmon; -- cgit v0.10.2 From bb92d19983a4b54be3e3b83441a8076d92cd04bc Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 12 Feb 2013 12:16:26 -0800 Subject: nl80211: add packet offset information for wowlan pattern If user knows the location of a wowlan pattern to be matched in Rx packet, he can provide an offset with the pattern. This will help drivers to ignore initial bytes and match the pattern efficiently. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [refactor pattern sending] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 77686ca..d3a7381 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1576,6 +1576,7 @@ struct cfg80211_pmksa { * one bit per byte, in same format as nl80211 * @pattern: bytes to match where bitmask is 1 * @pattern_len: length of pattern (in bytes) + * @pkt_offset: packet offset (in bytes) * * Internal note: @mask and @pattern are allocated in one chunk of * memory, free @mask only! @@ -1583,6 +1584,7 @@ struct cfg80211_pmksa { struct cfg80211_wowlan_trig_pkt_pattern { u8 *mask, *pattern; int pattern_len; + int pkt_offset; }; /** @@ -2290,12 +2292,14 @@ enum wiphy_wowlan_support_flags { * (see nl80211.h for the pattern definition) * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern + * @max_pkt_offset: maximum Rx packet offset */ struct wiphy_wowlan_support { u32 flags; int n_patterns; int pattern_max_len; int pattern_min_len; + int max_pkt_offset; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index b233211..eb7b322 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2910,6 +2910,8 @@ enum nl80211_tx_power_setting { * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. + * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number */ @@ -2917,6 +2919,7 @@ enum nl80211_wowlan_packet_pattern_attr { __NL80211_WOWLAN_PKTPAT_INVALID, NL80211_WOWLAN_PKTPAT_MASK, NL80211_WOWLAN_PKTPAT_PATTERN, + NL80211_WOWLAN_PKTPAT_OFFSET, NUM_NL80211_WOWLAN_PKTPAT, MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, @@ -2927,6 +2930,7 @@ enum nl80211_wowlan_packet_pattern_attr { * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the @@ -2936,6 +2940,7 @@ struct nl80211_wowlan_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); /** @@ -2951,9 +2956,10 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 93bc63e..cc0fad3 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1238,6 +1238,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.wowlan.pattern_min_len, .max_pattern_len = dev->wiphy.wowlan.pattern_max_len, + .max_pkt_offset = + dev->wiphy.wowlan.max_pkt_offset, }; if (nla_put(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN, sizeof(pat), &pat)) @@ -6895,6 +6897,39 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info) } #ifdef CONFIG_PM +static int nl80211_send_wowlan_patterns(struct sk_buff *msg, + struct cfg80211_registered_device *rdev) +{ + struct nlattr *nl_pats, *nl_pat; + int i, pat_len; + + if (!rdev->wowlan->n_patterns) + return 0; + + nl_pats = nla_nest_start(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN); + if (!nl_pats) + return -ENOBUFS; + + for (i = 0; i < rdev->wowlan->n_patterns; i++) { + nl_pat = nla_nest_start(msg, i + 1); + if (!nl_pat) + return -ENOBUFS; + pat_len = rdev->wowlan->patterns[i].pattern_len; + if (nla_put(msg, NL80211_WOWLAN_PKTPAT_MASK, + DIV_ROUND_UP(pat_len, 8), + rdev->wowlan->patterns[i].mask) || + nla_put(msg, NL80211_WOWLAN_PKTPAT_PATTERN, + pat_len, rdev->wowlan->patterns[i].pattern) || + nla_put_u32(msg, NL80211_WOWLAN_PKTPAT_OFFSET, + rdev->wowlan->patterns[i].pkt_offset)) + return -ENOBUFS; + nla_nest_end(msg, nl_pat); + } + nla_nest_end(msg, nl_pats); + + return 0; +} + static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -6935,32 +6970,8 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) (rdev->wowlan->rfkill_release && nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))) goto nla_put_failure; - if (rdev->wowlan->n_patterns) { - struct nlattr *nl_pats, *nl_pat; - int i, pat_len; - - nl_pats = nla_nest_start(msg, - NL80211_WOWLAN_TRIG_PKT_PATTERN); - if (!nl_pats) - goto nla_put_failure; - - for (i = 0; i < rdev->wowlan->n_patterns; i++) { - nl_pat = nla_nest_start(msg, i + 1); - if (!nl_pat) - goto nla_put_failure; - pat_len = rdev->wowlan->patterns[i].pattern_len; - if (nla_put(msg, NL80211_WOWLAN_PKTPAT_MASK, - DIV_ROUND_UP(pat_len, 8), - rdev->wowlan->patterns[i].mask) || - nla_put(msg, NL80211_WOWLAN_PKTPAT_PATTERN, - pat_len, - rdev->wowlan->patterns[i].pattern)) - goto nla_put_failure; - nla_nest_end(msg, nl_pat); - } - nla_nest_end(msg, nl_pats); - } - + if (nl80211_send_wowlan_patterns(msg, rdev)) + goto nla_put_failure; nla_nest_end(msg, nl_wowlan); } @@ -7046,7 +7057,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) { struct nlattr *pat; int n_patterns = 0; - int rem, pat_len, mask_len; + int rem, pat_len, mask_len, pkt_offset; struct nlattr *pat_tb[NUM_NL80211_WOWLAN_PKTPAT]; nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN], @@ -7081,6 +7092,15 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) pat_len < wowlan->pattern_min_len) goto error; + if (!pat_tb[NL80211_WOWLAN_PKTPAT_OFFSET]) + pkt_offset = 0; + else + pkt_offset = nla_get_u32( + pat_tb[NL80211_WOWLAN_PKTPAT_OFFSET]); + if (pkt_offset > wowlan->max_pkt_offset) + goto error; + new_triggers.patterns[i].pkt_offset = pkt_offset; + new_triggers.patterns[i].mask = kmalloc(mask_len + pat_len, GFP_KERNEL); if (!new_triggers.patterns[i].mask) { -- cgit v0.10.2 From 6719429dd61cde1fe30d9644d0aa2369eefc9005 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 12 Feb 2013 20:11:38 +0200 Subject: cfg80211: check vendor IE length to avoid overrun cfg80211_find_vendor_ie() was checking only that the vendor IE would fit in the remaining IEs buffer. If a corrupt includes a vendor IE that is too small, we could potentially overrun the IEs buffer. Fix this by checking that the vendor IE fits in the reported IE length field and skip it otherwise. Reported-by: Jouni Malinen Signed-off-by: Luciano Coelho [change BUILD_BUG_ON to != 1 (from >= 2)] Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index b7a1679..d0fc6da 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -365,14 +365,18 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, if (!pos) return NULL; - if (end - pos < sizeof(*ie)) - return NULL; - ie = (struct ieee80211_vendor_ie *)pos; + + /* make sure we can access ie->len */ + BUILD_BUG_ON(offsetof(struct ieee80211_vendor_ie, len) != 1); + + if (ie->len < sizeof(*ie)) + goto cont; + ie_oui = ie->oui[0] << 16 | ie->oui[1] << 8 | ie->oui[2]; if (ie_oui == oui && ie->oui_type == oui_type) return pos; - +cont: pos += 2 + ie->len; } return NULL; -- cgit v0.10.2 From a0497f9f57478c5a37c5628eb32833dd9729a821 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 13 Feb 2013 10:51:08 +0100 Subject: mac80211/minstrel_ht: add support for using CCK rates When MCS rates start to get bad in 2.4 GHz because of long range or strong interference, CCK rates can be a lot more robust. This patch adds a pseudo MCS group containing CCK rates (long preamble in the lower 4 slots, short preamble in the upper slots). Signed-off-by: Felix Fietkau [make minstrel_ht_get_stats static] Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 8c5acdc..eea45a2 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -494,6 +494,33 @@ minstrel_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta) kfree(mi); } +static void +minstrel_init_cck_rates(struct minstrel_priv *mp) +{ + static const int bitrates[4] = { 10, 20, 55, 110 }; + struct ieee80211_supported_band *sband; + int i, j; + + sband = mp->hw->wiphy->bands[IEEE80211_BAND_2GHZ]; + if (!sband) + return; + + for (i = 0, j = 0; i < sband->n_bitrates; i++) { + struct ieee80211_rate *rate = &sband->bitrates[i]; + + if (rate->flags & IEEE80211_RATE_ERP_G) + continue; + + for (j = 0; j < ARRAY_SIZE(bitrates); j++) { + if (rate->bitrate != bitrates[j]) + continue; + + mp->cck_rates[j] = i; + break; + } + } +} + static void * minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -539,6 +566,8 @@ minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) S_IRUGO | S_IWUGO, debugfsdir, &mp->fixed_rate_idx); #endif + minstrel_init_cck_rates(mp); + return mp; } diff --git a/net/mac80211/rc80211_minstrel.h b/net/mac80211/rc80211_minstrel.h index 5d278ec..5ecf757 100644 --- a/net/mac80211/rc80211_minstrel.h +++ b/net/mac80211/rc80211_minstrel.h @@ -79,6 +79,8 @@ struct minstrel_priv { unsigned int lookaround_rate; unsigned int lookaround_rate_mrr; + u8 cck_rates[4]; + #ifdef CONFIG_MAC80211_DEBUGFS /* * enable fixed rate processing per RC diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 5bb316a..6e35dcd 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Felix Fietkau + * Copyright (C) 2010-2013 Felix Fietkau * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -63,6 +63,30 @@ } \ } +#define CCK_DURATION(_bitrate, _short, _len) \ + (10 /* SIFS */ + \ + (_short ? 72 + 24 : 144 + 48 ) + \ + (8 * (_len + 4) * 10) / (_bitrate)) + +#define CCK_ACK_DURATION(_bitrate, _short) \ + (CCK_DURATION((_bitrate > 10 ? 20 : 10), false, 60) + \ + CCK_DURATION(_bitrate, _short, AVG_PKT_SIZE)) + +#define CCK_DURATION_LIST(_short) \ + CCK_ACK_DURATION(10, _short), \ + CCK_ACK_DURATION(20, _short), \ + CCK_ACK_DURATION(55, _short), \ + CCK_ACK_DURATION(110, _short) + +#define CCK_GROUP \ + [MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS] = { \ + .streams = 0, \ + .duration = { \ + CCK_DURATION_LIST(false), \ + CCK_DURATION_LIST(true) \ + } \ + } + /* * To enable sufficiently targeted rate sampling, MCS rates are divided into * groups, based on the number of streams and flags (HT40, SGI) that they @@ -95,8 +119,13 @@ const struct mcs_group minstrel_mcs_groups[] = { #if MINSTREL_MAX_STREAMS >= 3 MCS_GROUP(3, 1, 1), #endif + + /* must be last */ + CCK_GROUP }; +#define MINSTREL_CCK_GROUP (ARRAY_SIZE(minstrel_mcs_groups) - 1) + static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES]; /* @@ -119,6 +148,29 @@ minstrel_ht_get_group_idx(struct ieee80211_tx_rate *rate) !!(rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)); } +static struct minstrel_rate_stats * +minstrel_ht_get_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, + struct ieee80211_tx_rate *rate) +{ + int group, idx; + + if (rate->flags & IEEE80211_TX_RC_MCS) { + group = minstrel_ht_get_group_idx(rate); + idx = rate->idx % MCS_GROUP_RATES; + } else { + group = MINSTREL_CCK_GROUP; + + for (idx = 0; idx < ARRAY_SIZE(mp->cck_rates); idx++) + if (rate->idx == mp->cck_rates[idx]) + break; + + /* short preamble */ + if (!(mi->groups[group].supported & BIT(idx))) + idx += 4; + } + return &mi->groups[group].rates[idx]; +} + static inline struct minstrel_rate_stats * minstrel_get_ratestats(struct minstrel_ht_sta *mi, int index) { @@ -159,7 +211,7 @@ static void minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) { struct minstrel_rate_stats *mr; - unsigned int usecs; + unsigned int usecs = 0; mr = &mi->groups[group].rates[rate]; @@ -168,7 +220,9 @@ minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) return; } - usecs = mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); + if (group != MINSTREL_CCK_GROUP) + usecs = mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); + usecs += minstrel_mcs_groups[group].duration[rate]; mr->cur_tp = MINSTREL_TRUNC((1000000 / usecs) * mr->probability); } @@ -293,7 +347,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) } static bool -minstrel_ht_txstat_valid(struct ieee80211_tx_rate *rate) +minstrel_ht_txstat_valid(struct minstrel_priv *mp, struct ieee80211_tx_rate *rate) { if (rate->idx < 0) return false; @@ -301,7 +355,13 @@ minstrel_ht_txstat_valid(struct ieee80211_tx_rate *rate) if (!rate->count) return false; - return !!(rate->flags & IEEE80211_TX_RC_MCS); + if (rate->flags & IEEE80211_TX_RC_MCS) + return true; + + return rate->idx == mp->cck_rates[0] || + rate->idx == mp->cck_rates[1] || + rate->idx == mp->cck_rates[2] || + rate->idx == mp->cck_rates[3]; } static void @@ -386,7 +446,6 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, struct minstrel_rate_stats *rate, *rate2; struct minstrel_priv *mp = priv; bool last; - int group; int i; if (!msp->is_ht) @@ -415,13 +474,12 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) mi->sample_packets += info->status.ampdu_len; - last = !minstrel_ht_txstat_valid(&ar[0]); + last = !minstrel_ht_txstat_valid(mp, &ar[0]); for (i = 0; !last; i++) { last = (i == IEEE80211_TX_MAX_RATES - 1) || - !minstrel_ht_txstat_valid(&ar[i + 1]); + !minstrel_ht_txstat_valid(mp, &ar[i + 1]); - group = minstrel_ht_get_group_idx(&ar[i]); - rate = &mi->groups[group].rates[ar[i].idx % 8]; + rate = minstrel_ht_get_stats(mp, mi, &ar[i]); if (last) rate->success += info->status.ampdu_ack_len; @@ -447,7 +505,8 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, if (time_after(jiffies, mi->stats_update + (mp->update_interval / 2 * HZ) / 1000)) { minstrel_ht_update_stats(mp, mi); - if (!(info->flags & IEEE80211_TX_CTL_AMPDU)) + if (!(info->flags & IEEE80211_TX_CTL_AMPDU) && + mi->max_prob_rate / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) minstrel_aggr_check(sta, skb); } } @@ -463,6 +522,7 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, unsigned int ctime = 0; unsigned int t_slot = 9; /* FIXME */ unsigned int ampdu_len = MINSTREL_TRUNC(mi->avg_ampdu_len); + unsigned int overhead = 0, overhead_rtscts = 0; mr = minstrel_get_ratestats(mi, index); if (mr->probability < MINSTREL_FRAC(1, 10)) { @@ -484,9 +544,14 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, ctime += (t_slot * cw) >> 1; cw = min((cw << 1) | 1, mp->cw_max); + if (index / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) { + overhead = mi->overhead; + overhead_rtscts = mi->overhead_rtscts; + } + /* Total TX time for data and Contention after first 2 tries */ - tx_time = ctime + 2 * (mi->overhead + tx_time_data); - tx_time_rtscts = ctime + 2 * (mi->overhead_rtscts + tx_time_data); + tx_time = ctime + 2 * (overhead + tx_time_data); + tx_time_rtscts = ctime + 2 * (overhead_rtscts + tx_time_data); /* See how many more tries we can fit inside segment size */ do { @@ -495,8 +560,8 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, cw = min((cw << 1) | 1, mp->cw_max); /* Total TX time after this try */ - tx_time += ctime + mi->overhead + tx_time_data; - tx_time_rtscts += ctime + mi->overhead_rtscts + tx_time_data; + tx_time += ctime + overhead + tx_time_data; + tx_time_rtscts += ctime + overhead_rtscts + tx_time_data; if (tx_time_rtscts < mp->segment_size) mr->retry_count_rtscts++; @@ -526,9 +591,16 @@ minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, else rate->count = mr->retry_count; - rate->flags = IEEE80211_TX_RC_MCS | group->flags; + rate->flags = 0; if (rtscts) rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; + + if (index / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) { + rate->idx = mp->cck_rates[index % ARRAY_SIZE(mp->cck_rates)]; + return; + } + + rate->flags |= IEEE80211_TX_RC_MCS | group->flags; rate->idx = index % MCS_GROUP_RATES + (group->streams - 1) * MCS_GROUP_RATES; } @@ -592,6 +664,22 @@ minstrel_get_sample_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) } static void +minstrel_ht_check_cck_shortpreamble(struct minstrel_priv *mp, + struct minstrel_ht_sta *mi, bool val) +{ + u8 supported = mi->groups[MINSTREL_CCK_GROUP].supported; + + if (!supported || !mi->cck_supported_short) + return; + + if (supported & (mi->cck_supported_short << (val * 4))) + return; + + supported ^= mi->cck_supported_short | (mi->cck_supported_short << 4); + mi->groups[MINSTREL_CCK_GROUP].supported = supported; +} + +static void minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) { @@ -610,6 +698,7 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, return mac80211_minstrel.get_rate(priv, sta, &msp->legacy, txrc); info->flags |= mi->tx_flags; + minstrel_ht_check_cck_shortpreamble(mp, mi, txrc->short_preamble); /* Don't use EAPOL frames for sampling on non-mrr hw */ if (mp->hw->max_rates == 1 && @@ -683,6 +772,30 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, } static void +minstrel_ht_update_cck(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + int i; + + if (sband->band != IEEE80211_BAND_2GHZ) + return; + + mi->cck_supported = 0; + mi->cck_supported_short = 0; + for (i = 0; i < 4; i++) { + if (!rate_supported(sta, sband->band, mp->cck_rates[i])) + continue; + + mi->cck_supported |= BIT(i); + if (sband->bitrates[i].flags & IEEE80211_RATE_SHORT_PREAMBLE) + mi->cck_supported_short |= BIT(i); + } + + mi->groups[MINSTREL_CCK_GROUP].supported = mi->cck_supported; +} + +static void minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta) { @@ -702,7 +815,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, goto use_legacy; BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != - MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS); + MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS + 1); msp->is_ht = true; memset(mi, 0, sizeof(*mi)); @@ -738,6 +851,11 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, u16 req = 0; mi->groups[i].supported = 0; + if (i == MINSTREL_CCK_GROUP) { + minstrel_ht_update_cck(mp, mi, sband, sta); + continue; + } + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) req |= IEEE80211_HT_CAP_SGI_40; diff --git a/net/mac80211/rc80211_minstrel_ht.h b/net/mac80211/rc80211_minstrel_ht.h index 462d2b2..302dbd5 100644 --- a/net/mac80211/rc80211_minstrel_ht.h +++ b/net/mac80211/rc80211_minstrel_ht.h @@ -107,8 +107,11 @@ struct minstrel_ht_sta { /* current MCS group to be sampled */ u8 sample_group; + u8 cck_supported; + u8 cck_supported_short; + /* MCS rate group info and statistics */ - struct minstrel_mcs_group_data groups[MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS]; + struct minstrel_mcs_group_data groups[MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS + 1]; }; struct minstrel_ht_sta_priv { diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c index f2b7d26..df44a5a 100644 --- a/net/mac80211/rc80211_minstrel_ht_debugfs.c +++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c @@ -15,13 +15,76 @@ #include "rc80211_minstrel.h" #include "rc80211_minstrel_ht.h" +static char * +minstrel_ht_stats_dump(struct minstrel_ht_sta *mi, int i, char *p) +{ + unsigned int max_mcs = MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; + const struct mcs_group *mg; + unsigned int j, tp, prob, eprob; + char htmode = '2'; + char gimode = 'L'; + + if (!mi->groups[i].supported) + return p; + + mg = &minstrel_mcs_groups[i]; + if (mg->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + htmode = '4'; + if (mg->flags & IEEE80211_TX_RC_SHORT_GI) + gimode = 'S'; + + for (j = 0; j < MCS_GROUP_RATES; j++) { + struct minstrel_rate_stats *mr = &mi->groups[i].rates[j]; + static const int bitrates[4] = { 10, 20, 55, 110 }; + int idx = i * MCS_GROUP_RATES + j; + + if (!(mi->groups[i].supported & BIT(j))) + continue; + + if (i == max_mcs) + p += sprintf(p, "CCK/%cP ", j < 4 ? 'L' : 'S'); + else + p += sprintf(p, "HT%c0/%cGI ", htmode, gimode); + + *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; + *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; + *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; + + if (i == max_mcs) { + int r = bitrates[j % 4]; + p += sprintf(p, " %2u.%1uM", r / 10, r % 10); + } else { + p += sprintf(p, " MCS%-2u", (mg->streams - 1) * + MCS_GROUP_RATES + j); + } + + tp = mr->cur_tp / 10; + prob = MINSTREL_TRUNC(mr->cur_prob * 1000); + eprob = MINSTREL_TRUNC(mr->probability * 1000); + + p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " + "%3u %3u(%3u) %8llu %8llu\n", + tp / 10, tp % 10, + eprob / 10, eprob % 10, + prob / 10, prob % 10, + mr->retry_count, + mr->last_success, + mr->last_attempts, + (unsigned long long)mr->succ_hist, + (unsigned long long)mr->att_hist); + } + + return p; +} + static int minstrel_ht_stats_open(struct inode *inode, struct file *file) { struct minstrel_ht_sta_priv *msp = inode->i_private; struct minstrel_ht_sta *mi = &msp->ht; struct minstrel_debugfs_info *ms; - unsigned int i, j, tp, prob, eprob; + unsigned int i; + unsigned int max_mcs = MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; char *p; int ret; @@ -40,49 +103,11 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) p = ms->buf; p += sprintf(p, "type rate throughput ewma prob this prob " "retry this succ/attempt success attempts\n"); - for (i = 0; i < MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; i++) { - char htmode = '2'; - char gimode = 'L'; - - if (!mi->groups[i].supported) - continue; - - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - htmode = '4'; - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) - gimode = 'S'; - for (j = 0; j < MCS_GROUP_RATES; j++) { - struct minstrel_rate_stats *mr = &mi->groups[i].rates[j]; - int idx = i * MCS_GROUP_RATES + j; + p = minstrel_ht_stats_dump(mi, max_mcs, p); + for (i = 0; i < max_mcs; i++) + p = minstrel_ht_stats_dump(mi, i, p); - if (!(mi->groups[i].supported & BIT(j))) - continue; - - p += sprintf(p, "HT%c0/%cGI ", htmode, gimode); - - *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; - *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; - *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; - p += sprintf(p, " MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * - MCS_GROUP_RATES + j); - - tp = mr->cur_tp / 10; - prob = MINSTREL_TRUNC(mr->cur_prob * 1000); - eprob = MINSTREL_TRUNC(mr->probability * 1000); - - p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u %3u(%3u) %8llu %8llu\n", - tp / 10, tp % 10, - eprob / 10, eprob % 10, - prob / 10, prob % 10, - mr->retry_count, - mr->last_success, - mr->last_attempts, - (unsigned long long)mr->succ_hist, - (unsigned long long)mr->att_hist); - } - } p += sprintf(p, "\nTotal packet count:: ideal %d " "lookaround %d\n", max(0, (int) mi->total_packets - (int) mi->sample_packets), -- cgit v0.10.2 From 2a0e047ed62f20664005881b8e7f9328f910316a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Jan 2013 22:57:40 +0100 Subject: cfg80211: configuration for WoWLAN over TCP Intel Wireless devices are able to make a TCP connection after suspending, sending some data and waking up when the connection receives wakeup data (or breaks). Add the WoWLAN configuration and feature advertising API for it. Acked-by: David S. Miller Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d3a7381..7e6569e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -19,6 +19,7 @@ #include #include #include +#include #include /** @@ -1588,6 +1589,41 @@ struct cfg80211_wowlan_trig_pkt_pattern { }; /** + * struct cfg80211_wowlan_tcp - TCP connection parameters + * + * @sock: (internal) socket for source port allocation + * @src: source IP address + * @dst: destination IP address + * @dst_mac: destination MAC address + * @src_port: source port + * @dst_port: destination port + * @payload_len: data payload length + * @payload: data payload buffer + * @payload_seq: payload sequence stamping configuration + * @data_interval: interval at which to send data packets + * @wake_len: wakeup payload match length + * @wake_data: wakeup payload match data + * @wake_mask: wakeup payload match mask + * @tokens_size: length of the tokens buffer + * @payload_tok: payload token usage configuration + */ +struct cfg80211_wowlan_tcp { + struct socket *sock; + __be32 src, dst; + u16 src_port, dst_port; + u8 dst_mac[ETH_ALEN]; + int payload_len; + const u8 *payload; + struct nl80211_wowlan_tcp_data_seq payload_seq; + u32 data_interval; + u32 wake_len; + const u8 *wake_data, *wake_mask; + u32 tokens_size; + /* must be last, variable member */ + struct nl80211_wowlan_tcp_data_token payload_tok; +}; + +/** * struct cfg80211_wowlan - Wake on Wireless-LAN support info * * This structure defines the enabled WoWLAN triggers for the device. @@ -1601,12 +1637,15 @@ struct cfg80211_wowlan_trig_pkt_pattern { * @eap_identity_req: wake up on EAP identity request packet * @four_way_handshake: wake up on 4-way handshake * @rfkill_release: wake up when rfkill is released + * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. + * NULL if not configured. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, rfkill_release; struct cfg80211_wowlan_trig_pkt_pattern *patterns; + struct cfg80211_wowlan_tcp *tcp; int n_patterns; }; @@ -1626,11 +1665,15 @@ struct cfg80211_wowlan { * frame triggers an 802.3 frame should be reported, for * disconnect due to deauth 802.11 frame. This indicates which * it is. + * @tcp_match: TCP wakeup packet received + * @tcp_connlost: TCP connection lost or failed to establish + * @tcp_nomoretokens: TCP data ran out of tokens */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, - rfkill_release, packet_80211; + rfkill_release, packet_80211, + tcp_match, tcp_connlost, tcp_nomoretokens; s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; @@ -2285,6 +2328,14 @@ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), }; +struct wiphy_wowlan_tcp_support { + const struct nl80211_wowlan_tcp_data_token_feature *tok; + u32 data_payload_max; + u32 data_interval_max; + u32 wake_payload_max; + bool seq; +}; + /** * struct wiphy_wowlan_support - WoWLAN support data * @flags: see &enum wiphy_wowlan_support_flags @@ -2293,6 +2344,7 @@ enum wiphy_wowlan_support_flags { * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset + * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { u32 flags; @@ -2300,6 +2352,7 @@ struct wiphy_wowlan_support { int pattern_max_len; int pattern_min_len; int max_pkt_offset; + const struct wiphy_wowlan_tcp_support *tcp; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index eb7b322..5309b34 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2991,6 +2991,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -3012,6 +3023,10 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -3019,6 +3034,116 @@ enum nl80211_wowlan_triggers { }; /** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that diff --git a/net/wireless/core.h b/net/wireless/core.h index 37d70dc..949c957 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -108,6 +108,9 @@ cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev) for (i = 0; i < rdev->wowlan->n_patterns; i++) kfree(rdev->wowlan->patterns[i].mask); kfree(rdev->wowlan->patterns); + if (rdev->wowlan->tcp && rdev->wowlan->tcp->sock) + sock_release(rdev->wowlan->tcp->sock); + kfree(rdev->wowlan->tcp); kfree(rdev->wowlan); } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index cc0fad3..d29a461 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "core.h" #include "nl80211.h" #include "reg.h" @@ -399,6 +400,26 @@ nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = { [NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST] = { .type = NLA_FLAG }, [NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE] = { .type = NLA_FLAG }, [NL80211_WOWLAN_TRIG_RFKILL_RELEASE] = { .type = NLA_FLAG }, + [NL80211_WOWLAN_TRIG_TCP_CONNECTION] = { .type = NLA_NESTED }, +}; + +static const struct nla_policy +nl80211_wowlan_tcp_policy[NUM_NL80211_WOWLAN_TCP] = { + [NL80211_WOWLAN_TCP_SRC_IPV4] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_DST_IPV4] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_DST_MAC] = { .len = ETH_ALEN }, + [NL80211_WOWLAN_TCP_SRC_PORT] = { .type = NLA_U16 }, + [NL80211_WOWLAN_TCP_DST_PORT] = { .type = NLA_U16 }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD] = { .len = 1 }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ] = { + .len = sizeof(struct nl80211_wowlan_tcp_data_seq) + }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN] = { + .len = sizeof(struct nl80211_wowlan_tcp_data_token) + }, + [NL80211_WOWLAN_TCP_DATA_INTERVAL] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_WAKE_PAYLOAD] = { .len = 1 }, + [NL80211_WOWLAN_TCP_WAKE_MASK] = { .len = 1 }, }; /* policy for GTK rekey offload attributes */ @@ -872,6 +893,48 @@ nla_put_failure: return -ENOBUFS; } +#ifdef CONFIG_PM +static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev, + struct sk_buff *msg) +{ + const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan.tcp; + struct nlattr *nl_tcp; + + if (!tcp) + return 0; + + nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION); + if (!nl_tcp) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->data_payload_max)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->data_payload_max)) + return -ENOBUFS; + + if (tcp->seq && nla_put_flag(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ)) + return -ENOBUFS; + + if (tcp->tok && nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + sizeof(*tcp->tok), tcp->tok)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL, + tcp->data_interval_max)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + tcp->wake_payload_max)) + return -ENOBUFS; + + nla_nest_end(msg, nl_tcp); + return 0; +} +#endif + static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flags, struct cfg80211_registered_device *dev) { @@ -1246,6 +1309,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag goto nla_put_failure; } + if (nl80211_send_wowlan_tcp_caps(dev, msg)) + goto nla_put_failure; + nla_nest_end(msg, nl_wowlan); } #endif @@ -6930,16 +6996,67 @@ static int nl80211_send_wowlan_patterns(struct sk_buff *msg, return 0; } +static int nl80211_send_wowlan_tcp(struct sk_buff *msg, + struct cfg80211_wowlan_tcp *tcp) +{ + struct nlattr *nl_tcp; + + if (!tcp) + return 0; + + nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION); + if (!nl_tcp) + return -ENOBUFS; + + if (nla_put_be32(msg, NL80211_WOWLAN_TCP_SRC_IPV4, tcp->src) || + nla_put_be32(msg, NL80211_WOWLAN_TCP_DST_IPV4, tcp->dst) || + nla_put(msg, NL80211_WOWLAN_TCP_DST_MAC, ETH_ALEN, tcp->dst_mac) || + nla_put_u16(msg, NL80211_WOWLAN_TCP_SRC_PORT, tcp->src_port) || + nla_put_u16(msg, NL80211_WOWLAN_TCP_DST_PORT, tcp->dst_port) || + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->payload_len, tcp->payload) || + nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL, + tcp->data_interval) || + nla_put(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + tcp->wake_len, tcp->wake_data) || + nla_put(msg, NL80211_WOWLAN_TCP_WAKE_MASK, + DIV_ROUND_UP(tcp->wake_len, 8), tcp->wake_mask)) + return -ENOBUFS; + + if (tcp->payload_seq.len && + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + sizeof(tcp->payload_seq), &tcp->payload_seq)) + return -ENOBUFS; + + if (tcp->payload_tok.len && + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + sizeof(tcp->payload_tok) + tcp->tokens_size, + &tcp->payload_tok)) + return -ENOBUFS; + + return 0; +} + static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct sk_buff *msg; void *hdr; + u32 size = NLMSG_DEFAULT_SIZE; - if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns) + if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns && + !rdev->wiphy.wowlan.tcp) return -EOPNOTSUPP; - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (rdev->wowlan && rdev->wowlan->tcp) { + /* adjust size to have room for all the data */ + size += rdev->wowlan->tcp->tokens_size + + rdev->wowlan->tcp->payload_len + + rdev->wowlan->tcp->wake_len + + rdev->wowlan->tcp->wake_len / 8; + } + + msg = nlmsg_new(size, GFP_KERNEL); if (!msg) return -ENOMEM; @@ -6970,8 +7087,13 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) (rdev->wowlan->rfkill_release && nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))) goto nla_put_failure; + if (nl80211_send_wowlan_patterns(msg, rdev)) goto nla_put_failure; + + if (nl80211_send_wowlan_tcp(msg, rdev->wowlan->tcp)) + goto nla_put_failure; + nla_nest_end(msg, nl_wowlan); } @@ -6983,6 +7105,150 @@ nla_put_failure: return -ENOBUFS; } +static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev, + struct nlattr *attr, + struct cfg80211_wowlan *trig) +{ + struct nlattr *tb[NUM_NL80211_WOWLAN_TCP]; + struct cfg80211_wowlan_tcp *cfg; + struct nl80211_wowlan_tcp_data_token *tok = NULL; + struct nl80211_wowlan_tcp_data_seq *seq = NULL; + u32 size; + u32 data_size, wake_size, tokens_size = 0, wake_mask_size; + int err, port; + + if (!rdev->wiphy.wowlan.tcp) + return -EINVAL; + + err = nla_parse(tb, MAX_NL80211_WOWLAN_TCP, + nla_data(attr), nla_len(attr), + nl80211_wowlan_tcp_policy); + if (err) + return err; + + if (!tb[NL80211_WOWLAN_TCP_SRC_IPV4] || + !tb[NL80211_WOWLAN_TCP_DST_IPV4] || + !tb[NL80211_WOWLAN_TCP_DST_MAC] || + !tb[NL80211_WOWLAN_TCP_DST_PORT] || + !tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD] || + !tb[NL80211_WOWLAN_TCP_DATA_INTERVAL] || + !tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD] || + !tb[NL80211_WOWLAN_TCP_WAKE_MASK]) + return -EINVAL; + + data_size = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]); + if (data_size > rdev->wiphy.wowlan.tcp->data_payload_max) + return -EINVAL; + + if (nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) > + rdev->wiphy.wowlan.tcp->data_interval_max) + return -EINVAL; + + wake_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]); + if (wake_size > rdev->wiphy.wowlan.tcp->wake_payload_max) + return -EINVAL; + + wake_mask_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_MASK]); + if (wake_mask_size != DIV_ROUND_UP(wake_size, 8)) + return -EINVAL; + + if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]) { + u32 tokln = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]); + + tok = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]); + tokens_size = tokln - sizeof(*tok); + + if (!tok->len || tokens_size % tok->len) + return -EINVAL; + if (!rdev->wiphy.wowlan.tcp->tok) + return -EINVAL; + if (tok->len > rdev->wiphy.wowlan.tcp->tok->max_len) + return -EINVAL; + if (tok->len < rdev->wiphy.wowlan.tcp->tok->min_len) + return -EINVAL; + if (tokens_size > rdev->wiphy.wowlan.tcp->tok->bufsize) + return -EINVAL; + if (tok->offset + tok->len > data_size) + return -EINVAL; + } + + if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]) { + seq = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]); + if (!rdev->wiphy.wowlan.tcp->seq) + return -EINVAL; + if (seq->len == 0 || seq->len > 4) + return -EINVAL; + if (seq->len + seq->offset > data_size) + return -EINVAL; + } + + size = sizeof(*cfg); + size += data_size; + size += wake_size + wake_mask_size; + size += tokens_size; + + cfg = kzalloc(size, GFP_KERNEL); + if (!cfg) + return -ENOMEM; + cfg->src = nla_get_be32(tb[NL80211_WOWLAN_TCP_SRC_IPV4]); + cfg->dst = nla_get_be32(tb[NL80211_WOWLAN_TCP_DST_IPV4]); + memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]), + ETH_ALEN); + if (tb[NL80211_WOWLAN_TCP_SRC_PORT]) + port = nla_get_u16(tb[NL80211_WOWLAN_TCP_SRC_PORT]); + else + port = 0; +#ifdef CONFIG_INET + /* allocate a socket and port for it and use it */ + err = __sock_create(wiphy_net(&rdev->wiphy), PF_INET, SOCK_STREAM, + IPPROTO_TCP, &cfg->sock, 1); + if (err) { + kfree(cfg); + return err; + } + if (inet_csk_get_port(cfg->sock->sk, port)) { + sock_release(cfg->sock); + kfree(cfg); + return -EADDRINUSE; + } + cfg->src_port = inet_sk(cfg->sock->sk)->inet_num; +#else + if (!port) { + kfree(cfg); + return -EINVAL; + } + cfg->src_port = port; +#endif + + cfg->dst_port = nla_get_u16(tb[NL80211_WOWLAN_TCP_DST_PORT]); + cfg->payload_len = data_size; + cfg->payload = (u8 *)cfg + sizeof(*cfg) + tokens_size; + memcpy((void *)cfg->payload, + nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]), + data_size); + if (seq) + cfg->payload_seq = *seq; + cfg->data_interval = nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]); + cfg->wake_len = wake_size; + cfg->wake_data = (u8 *)cfg + sizeof(*cfg) + tokens_size + data_size; + memcpy((void *)cfg->wake_data, + nla_data(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]), + wake_size); + cfg->wake_mask = (u8 *)cfg + sizeof(*cfg) + tokens_size + + data_size + wake_size; + memcpy((void *)cfg->wake_mask, + nla_data(tb[NL80211_WOWLAN_TCP_WAKE_MASK]), + wake_mask_size); + if (tok) { + cfg->tokens_size = tokens_size; + memcpy(&cfg->payload_tok, tok, sizeof(*tok) + tokens_size); + } + + trig->tcp = cfg; + + return 0; +} + static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -6993,7 +7259,8 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) int err, i; bool prev_enabled = rdev->wowlan; - if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns) + if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns && + !rdev->wiphy.wowlan.tcp) return -EOPNOTSUPP; if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]) { @@ -7120,6 +7387,14 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) } } + if (tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION]) { + err = nl80211_parse_wowlan_tcp( + rdev, tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION], + &new_triggers); + if (err) + goto error; + } + ntrig = kmemdup(&new_triggers, sizeof(new_triggers), GFP_KERNEL); if (!ntrig) { err = -ENOMEM; @@ -7137,6 +7412,9 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) for (i = 0; i < new_triggers.n_patterns; i++) kfree(new_triggers.patterns[i].mask); kfree(new_triggers.patterns); + if (new_triggers.tcp && new_triggers.tcp->sock) + sock_release(new_triggers.tcp->sock); + kfree(new_triggers.tcp); return err; } #endif @@ -9418,6 +9696,17 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, wakeup->pattern_idx)) goto free_msg; + if (wakeup->tcp_match) + nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH); + + if (wakeup->tcp_connlost) + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST); + + if (wakeup->tcp_nomoretokens) + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS); + if (wakeup->packet) { u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211; u32 len_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN; -- cgit v0.10.2 From 99d5851eefe589346c976a4b539ee498267bc5fd Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 13 Feb 2013 11:20:27 +0000 Subject: net: skbuff: fix compile error in skb_panic() I get the following build error on next-20130213 due to the following commit: commit f05de73bf82fbbc00265c06d12efb7273f7dc54a ("skbuff: create skb_panic() function and its wrappers"). It adds an argument called panic to a function that uses the BUG() macro which tries to call panic, but the argument masks the panic() function declaration, resulting in the following error (gcc 4.2.4): net/core/skbuff.c In function 'skb_panic': net/core/skbuff.c +126 : error: called object 'panic' is not a function This is fixed by renaming the argument to msg. Signed-off-by: James Hogan Cc: Jean Sacren Cc: Jiri Pirko Cc: David S. Miller Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 8731c39..21a22cc 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -109,7 +109,7 @@ static const struct pipe_buf_operations sock_pipe_buf_ops = { * @skb: buffer * @sz: size * @addr: address - * @panic: skb_over_panic or skb_under_panic + * @msg: skb_over_panic or skb_under_panic * * Out-of-line support for skb_put() and skb_push(). * Called via the wrapper skb_over_panic() or skb_under_panic(). @@ -117,10 +117,10 @@ static const struct pipe_buf_operations sock_pipe_buf_ops = { * __builtin_return_address is not used because it is not always reliable. */ static void skb_panic(struct sk_buff *skb, unsigned int sz, void *addr, - const char panic[]) + const char msg[]) { pr_emerg("%s: text:%p len:%d put:%d head:%p data:%p tail:%#lx end:%#lx dev:%s\n", - panic, addr, skb->len, sz, skb->head, skb->data, + msg, addr, skb->len, sz, skb->head, skb->data, (unsigned long)skb->tail, (unsigned long)skb->end, skb->dev ? skb->dev->name : ""); BUG(); -- cgit v0.10.2 From 959d5fdee7aa32fa04bc2c37e3d3871ad266fe97 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 13 Feb 2013 11:32:42 -0500 Subject: netpoll: fix smatch warnings in netpoll core code Dan Carpenter contacted me with some notes regarding some smatch warnings in the netpoll code, some of which I introduced with my recent netpoll locking fixes, some which were there prior. Specifically they were: net-next/net/core/netpoll.c:243 netpoll_poll_dev() warn: inconsistent returns mutex:&ni->dev_lock: locked (213,217) unlocked (210,243) net-next/net/core/netpoll.c:706 netpoll_neigh_reply() warn: potential pointer math issue ('skb_transport_header(send_skb)' is a 128 bit pointer) This patch corrects the locking imbalance (the first error), and adds some parenthesis to correct the second error. Tested by myself. Applies to net-next Signed-off-by: Neil Horman CC: Dan Carpenter CC: "David S. Miller" Signed-off-by: David S. Miller diff --git a/net/core/netpoll.c b/net/core/netpoll.c index bcfd4f4..fa32899 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -209,12 +209,16 @@ static void netpoll_poll_dev(struct net_device *dev) if (!mutex_trylock(&ni->dev_lock)) return; - if (!dev || !netif_running(dev)) + if (!netif_running(dev)) { + mutex_unlock(&ni->dev_lock); return; + } ops = dev->netdev_ops; - if (!ops->ndo_poll_controller) + if (!ops->ndo_poll_controller) { + mutex_unlock(&ni->dev_lock); return; + } /* Process pending work on NIC */ ops->ndo_poll_controller(dev); @@ -703,7 +707,7 @@ static void netpoll_neigh_reply(struct sk_buff *skb, struct netpoll_info *npinfo icmp6h->icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT; icmp6h->icmp6_router = 0; icmp6h->icmp6_solicited = 1; - target = (struct in6_addr *)skb_transport_header(send_skb) + sizeof(struct icmp6hdr); + target = (struct in6_addr *)(skb_transport_header(send_skb) + sizeof(struct icmp6hdr)); *target = msg->target; icmp6h->icmp6_cksum = csum_ipv6_magic(saddr, daddr, size, IPPROTO_ICMPV6, -- cgit v0.10.2 From ceaa1fef65a7c2e017b260b879b310dd24888083 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Mon, 11 Feb 2013 05:50:17 +0000 Subject: tcp: adding a per-socket timestamp offset This functionality is used for restoring tcp sockets. A tcp timestamp depends on how long a system has been running, so it's differ for each host. The solution is to set a per-socket offset. A per-socket offset for a TIME_WAIT socket is inherited from a proper tcp socket. tcp_request_sock doesn't have a timestamp offset, because the repair mode for them are not implemented. Cc: "David S. Miller" Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Cc: Eric Dumazet Cc: Pavel Emelyanov Signed-off-by: Andrey Vagin Signed-off-by: David S. Miller diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 6d0d461..f28408c 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -162,6 +162,8 @@ struct tcp_sock { u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ u32 lsndtime; /* timestamp of last sent data packet (for restart window) */ + u32 tsoffset; /* timestamp offset */ + struct list_head tsq_node; /* anchor in tsq_tasklet.head list */ unsigned long tsq_flags; @@ -353,6 +355,7 @@ struct tcp_timewait_sock { u32 tw_rcv_nxt; u32 tw_snd_nxt; u32 tw_rcv_wnd; + u32 tw_ts_offset; u32 tw_ts_recent; long tw_ts_recent_stamp; #ifdef CONFIG_TCP_MD5SIG diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 2c7e596..8a90bda 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -400,6 +400,8 @@ void tcp_init_sock(struct sock *sk) tcp_enable_early_retrans(tp); icsk->icsk_ca_ops = &tcp_init_congestion_ops; + tp->tsoffset = 0; + sk->sk_state = TCP_CLOSE; sk->sk_write_space = sk_stream_write_space; diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index f040928..4dfc99f 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -288,6 +288,7 @@ void tcp_time_wait(struct sock *sk, int state, int timeo) tcptw->tw_rcv_wnd = tcp_receive_window(tp); tcptw->tw_ts_recent = tp->rx_opt.ts_recent; tcptw->tw_ts_recent_stamp = tp->rx_opt.ts_recent_stamp; + tcptw->tw_ts_offset = tp->tsoffset; #if IS_ENABLED(CONFIG_IPV6) if (tw->tw_family == PF_INET6) { @@ -499,6 +500,7 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, newtp->rx_opt.ts_recent_stamp = 0; newtp->tcp_header_len = sizeof(struct tcphdr); } + newtp->tsoffset = 0; #ifdef CONFIG_TCP_MD5SIG newtp->md5sig_info = NULL; /*XXX*/ if (newtp->af_specific->md5_lookup(sk, newsk)) -- cgit v0.10.2 From 93be6ce0e91b6a94783e012b1857a347a5e6e9f2 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Mon, 11 Feb 2013 05:50:18 +0000 Subject: tcp: set and get per-socket timestamp A timestamp can be set, only if a socket is in the repair mode. This patch adds a new socket option TCP_TIMESTAMP, which allows to get and set current tcp times stamp. Cc: "David S. Miller" Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Cc: Eric Dumazet Cc: Pavel Emelyanov Signed-off-by: Andrey Vagin Signed-off-by: David S. Miller diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index e962faa..6b1ead0 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -111,6 +111,7 @@ enum { #define TCP_QUEUE_SEQ 21 #define TCP_REPAIR_OPTIONS 22 #define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ +#define TCP_TIMESTAMP 24 struct tcp_repair_opt { __u32 opt_code; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8a90bda..801b07b 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2714,6 +2714,12 @@ static int do_tcp_setsockopt(struct sock *sk, int level, else err = -EINVAL; break; + case TCP_TIMESTAMP: + if (!tp->repair) + err = -EPERM; + else + tp->tsoffset = val - tcp_time_stamp; + break; default: err = -ENOPROTOOPT; break; @@ -2962,6 +2968,9 @@ static int do_tcp_getsockopt(struct sock *sk, int level, case TCP_USER_TIMEOUT: val = jiffies_to_msecs(icsk->icsk_user_timeout); break; + case TCP_TIMESTAMP: + val = tcp_time_stamp + tp->tsoffset; + break; default: return -ENOPROTOOPT; } -- cgit v0.10.2 From ee684b6f2830047d19877e5547989740f18b1a5d Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Mon, 11 Feb 2013 05:50:19 +0000 Subject: tcp: send packets with a socket timestamp A socket timestamp is a sum of the global tcp_time_stamp and a per-socket offset. A socket offset is added in places where externally visible tcp timestamp option is parsed/initialized. Connections in the SYN_RECV state are not supported, global tcp_time_stamp is used for them, because repair mode doesn't support this state. In a future it can be implemented by the similar way as for TIME_WAIT sockets. Cc: "David S. Miller" Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Cc: Eric Dumazet Cc: Pavel Emelyanov Signed-off-by: Andrey Vagin Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ea678b6..d9bfaea 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3860,7 +3860,7 @@ static bool tcp_parse_aligned_timestamp(struct tcp_sock *tp, const struct tcphdr ++ptr; tp->rx_opt.rcv_tsval = ntohl(*ptr); ++ptr; - tp->rx_opt.rcv_tsecr = ntohl(*ptr); + tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; return true; } return false; @@ -3884,7 +3884,11 @@ static bool tcp_fast_parse_options(const struct sk_buff *skb, if (tcp_parse_aligned_timestamp(tp, th)) return true; } + tcp_parse_options(skb, &tp->rx_opt, hvpp, 1, NULL); + if (tp->rx_opt.saw_tstamp) + tp->rx_opt.rcv_tsecr -= tp->tsoffset; + return true; } @@ -5665,6 +5669,8 @@ static int tcp_rcv_synsent_state_process(struct sock *sk, struct sk_buff *skb, int saved_clamp = tp->rx_opt.mss_clamp; tcp_parse_options(skb, &tp->rx_opt, &hash_location, 0, &foc); + if (tp->rx_opt.saw_tstamp) + tp->rx_opt.rcv_tsecr -= tp->tsoffset; if (th->ack) { /* rfc793: diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 0eaf685..77f5050 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -726,7 +726,7 @@ release_sk1: */ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, - u32 win, u32 ts, int oif, + u32 win, u32 tsval, u32 tsecr, int oif, struct tcp_md5sig_key *key, int reply_flags, u8 tos) { @@ -747,12 +747,12 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, arg.iov[0].iov_base = (unsigned char *)&rep; arg.iov[0].iov_len = sizeof(rep.th); - if (ts) { + if (tsecr) { rep.opt[0] = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); - rep.opt[1] = htonl(tcp_time_stamp); - rep.opt[2] = htonl(ts); + rep.opt[1] = htonl(tsval); + rep.opt[2] = htonl(tsecr); arg.iov[0].iov_len += TCPOLEN_TSTAMP_ALIGNED; } @@ -767,7 +767,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, #ifdef CONFIG_TCP_MD5SIG if (key) { - int offset = (ts) ? 3 : 0; + int offset = (tsecr) ? 3 : 0; rep.opt[offset++] = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | @@ -802,6 +802,7 @@ static void tcp_v4_timewait_ack(struct sock *sk, struct sk_buff *skb) tcp_v4_send_ack(skb, tcptw->tw_snd_nxt, tcptw->tw_rcv_nxt, tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale, + tcp_time_stamp + tcptw->tw_ts_offset, tcptw->tw_ts_recent, tw->tw_bound_dev_if, tcp_twsk_md5_key(tcptw), @@ -821,6 +822,7 @@ static void tcp_v4_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, tcp_v4_send_ack(skb, (sk->sk_state == TCP_LISTEN) ? tcp_rsk(req)->snt_isn + 1 : tcp_sk(sk)->snd_nxt, tcp_rsk(req)->rcv_nxt, req->rcv_wnd, + tcp_time_stamp, req->ts_recent, 0, tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&ip_hdr(skb)->daddr, diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 4dfc99f..b83a49c 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -102,6 +102,7 @@ tcp_timewait_state_process(struct inet_timewait_sock *tw, struct sk_buff *skb, tcp_parse_options(skb, &tmp_opt, &hash_location, 0, NULL); if (tmp_opt.saw_tstamp) { + tmp_opt.rcv_tsecr -= tcptw->tw_ts_offset; tmp_opt.ts_recent = tcptw->tw_ts_recent; tmp_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp; paws_reject = tcp_paws_reject(&tmp_opt, th->rst); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 367e2ec..564bf89 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -622,7 +622,7 @@ static unsigned int tcp_syn_options(struct sock *sk, struct sk_buff *skb, if (likely(sysctl_tcp_timestamps && *md5 == NULL)) { opts->options |= OPTION_TS; - opts->tsval = TCP_SKB_CB(skb)->when; + opts->tsval = TCP_SKB_CB(skb)->when + tp->tsoffset; opts->tsecr = tp->rx_opt.ts_recent; remaining -= TCPOLEN_TSTAMP_ALIGNED; } @@ -806,7 +806,7 @@ static unsigned int tcp_established_options(struct sock *sk, struct sk_buff *skb if (likely(tp->rx_opt.tstamp_ok)) { opts->options |= OPTION_TS; - opts->tsval = tcb ? tcb->when : 0; + opts->tsval = tcb ? tcb->when + tp->tsoffset : 0; opts->tsecr = tp->rx_opt.ts_recent; size += TCPOLEN_TSTAMP_ALIGNED; } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index bbb28ae..9b64600 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -713,7 +713,8 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = { #endif static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win, - u32 ts, struct tcp_md5sig_key *key, int rst, u8 tclass) + u32 tsval, u32 tsecr, + struct tcp_md5sig_key *key, int rst, u8 tclass) { const struct tcphdr *th = tcp_hdr(skb); struct tcphdr *t1; @@ -725,7 +726,7 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win, struct dst_entry *dst; __be32 *topt; - if (ts) + if (tsecr) tot_len += TCPOLEN_TSTAMP_ALIGNED; #ifdef CONFIG_TCP_MD5SIG if (key) @@ -755,11 +756,11 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win, topt = (__be32 *)(t1 + 1); - if (ts) { + if (tsecr) { *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); - *topt++ = htonl(tcp_time_stamp); - *topt++ = htonl(ts); + *topt++ = htonl(tsval); + *topt++ = htonl(tsecr); } #ifdef CONFIG_TCP_MD5SIG @@ -860,7 +861,7 @@ static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb) ack_seq = ntohl(th->seq) + th->syn + th->fin + skb->len - (th->doff << 2); - tcp_v6_send_response(skb, seq, ack_seq, 0, 0, key, 1, 0); + tcp_v6_send_response(skb, seq, ack_seq, 0, 0, 0, key, 1, 0); #ifdef CONFIG_TCP_MD5SIG release_sk1: @@ -871,10 +872,11 @@ release_sk1: #endif } -static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 ts, +static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, + u32 win, u32 tsval, u32 tsecr, struct tcp_md5sig_key *key, u8 tclass) { - tcp_v6_send_response(skb, seq, ack, win, ts, key, 0, tclass); + tcp_v6_send_response(skb, seq, ack, win, tsval, tsecr, key, 0, tclass); } static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) @@ -884,6 +886,7 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) tcp_v6_send_ack(skb, tcptw->tw_snd_nxt, tcptw->tw_rcv_nxt, tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale, + tcp_time_stamp + tcptw->tw_ts_offset, tcptw->tw_ts_recent, tcp_twsk_md5_key(tcptw), tw->tw_tclass); @@ -893,7 +896,8 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, struct request_sock *req) { - tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent, + tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, + req->rcv_wnd, tcp_time_stamp, req->ts_recent, tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr), 0); } -- cgit v0.10.2 From c9af6db4c11ccc6c3e7f19bbc15d54023956f97c Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Mon, 11 Feb 2013 09:27:41 +0000 Subject: net: Fix possible wrong checksum generation. Patch cef401de7be8c4e (net: fix possible wrong checksum generation) fixed wrong checksum calculation but it broke TSO by defining new GSO type but not a netdev feature for that type. net_gso_ok() would not allow hardware checksum/segmentation offload of such packets without the feature. Following patch fixes TSO and wrong checksum. This patch uses same logic that Eric Dumazet used. Patch introduces new flag SKBTX_SHARED_FRAG if at least one frag can be modified by the user. but SKBTX_SHARED_FRAG flag is kept in skb shared info tx_flags rather than gso_type. tx_flags is better compared to gso_type since we can have skb with shared frag without gso packet. It does not link SHARED_FRAG to GSO, So there is no need to define netdev feature for this. Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index b181dfb..9724301 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -543,7 +543,6 @@ static int zerocopy_sg_from_iovec(struct sk_buff *skb, const struct iovec *from, skb->data_len += len; skb->len += len; skb->truesize += truesize; - skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; atomic_add(truesize, &skb->sk->sk_wmem_alloc); while (len) { int off = base & ~PAGE_MASK; @@ -599,7 +598,7 @@ static int macvtap_skb_from_vnet_hdr(struct sk_buff *skb, if (vnet_hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { skb_shinfo(skb)->gso_size = vnet_hdr->gso_size; - skb_shinfo(skb)->gso_type |= gso_type; + skb_shinfo(skb)->gso_type = gso_type; /* Header must be checked, and gso_segs computed. */ skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; @@ -743,6 +742,7 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q, struct msghdr *m, if (zerocopy) { skb_shinfo(skb)->destructor_arg = m->msg_control; skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY; + skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; } if (vlan) macvlan_start_xmit(skb, vlan->dev); diff --git a/drivers/net/tun.c b/drivers/net/tun.c index b1038c0..b6f45c5 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1019,7 +1019,6 @@ static int zerocopy_sg_from_iovec(struct sk_buff *skb, const struct iovec *from, skb->data_len += len; skb->len += len; skb->truesize += truesize; - skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; atomic_add(truesize, &skb->sk->sk_wmem_alloc); while (len) { int off = base & ~PAGE_MASK; @@ -1165,18 +1164,16 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) { - unsigned short gso_type = 0; - pr_debug("GSO!\n"); switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { case VIRTIO_NET_HDR_GSO_TCPV4: - gso_type = SKB_GSO_TCPV4; + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; break; case VIRTIO_NET_HDR_GSO_TCPV6: - gso_type = SKB_GSO_TCPV6; + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; break; case VIRTIO_NET_HDR_GSO_UDP: - gso_type = SKB_GSO_UDP; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP; break; default: tun->dev->stats.rx_frame_errors++; @@ -1185,10 +1182,9 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (gso.gso_type & VIRTIO_NET_HDR_GSO_ECN) - gso_type |= SKB_GSO_TCP_ECN; + skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN; skb_shinfo(skb)->gso_size = gso.gso_size; - skb_shinfo(skb)->gso_type |= gso_type; if (skb_shinfo(skb)->gso_size == 0) { tun->dev->stats.rx_frame_errors++; kfree_skb(skb); @@ -1204,6 +1200,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, if (zerocopy) { skb_shinfo(skb)->destructor_arg = msg_control; skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY; + skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; } skb_reset_network_header(skb); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 381a2d8..192c91c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -227,7 +227,7 @@ static void set_skb_frag(struct sk_buff *skb, struct page *page, skb->len += size; skb->truesize += PAGE_SIZE; skb_shinfo(skb)->nr_frags++; - skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; + skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; *len -= size; } @@ -387,18 +387,16 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len) ntohs(skb->protocol), skb->len, skb->pkt_type); if (hdr->hdr.gso_type != VIRTIO_NET_HDR_GSO_NONE) { - unsigned short gso_type = 0; - pr_debug("GSO!\n"); switch (hdr->hdr.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { case VIRTIO_NET_HDR_GSO_TCPV4: - gso_type = SKB_GSO_TCPV4; + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; break; case VIRTIO_NET_HDR_GSO_UDP: - gso_type = SKB_GSO_UDP; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP; break; case VIRTIO_NET_HDR_GSO_TCPV6: - gso_type = SKB_GSO_TCPV6; + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; break; default: net_warn_ratelimited("%s: bad gso type %u.\n", @@ -407,7 +405,7 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len) } if (hdr->hdr.gso_type & VIRTIO_NET_HDR_GSO_ECN) - gso_type |= SKB_GSO_TCP_ECN; + skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN; skb_shinfo(skb)->gso_size = hdr->hdr.gso_size; if (skb_shinfo(skb)->gso_size == 0) { @@ -415,7 +413,6 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len) goto frame_err; } - skb_shinfo(skb)->gso_type |= gso_type; /* Header must be checked, and gso_segs computed. */ skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; skb_shinfo(skb)->gso_segs = 0; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index d7573c3..9da9952 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -230,6 +230,13 @@ enum { /* generate wifi status information (where possible) */ SKBTX_WIFI_STATUS = 1 << 4, + + /* This indicates at least one fragment might be overwritten + * (as in vmsplice(), sendfile() ...) + * If we need to compute a TX checksum, we'll need to copy + * all frags to avoid possible bad checksum + */ + SKBTX_SHARED_FRAG = 1 << 5, }; /* @@ -307,13 +314,6 @@ enum { SKB_GSO_TCPV6 = 1 << 4, SKB_GSO_FCOE = 1 << 5, - - /* This indicates at least one fragment might be overwritten - * (as in vmsplice(), sendfile() ...) - * If we need to compute a TX checksum, we'll need to copy - * all frags to avoid possible bad checksum - */ - SKB_GSO_SHARED_FRAG = 1 << 6, }; #if BITS_PER_LONG > 32 @@ -2220,7 +2220,8 @@ static inline int skb_linearize(struct sk_buff *skb) */ static inline bool skb_has_shared_frag(const struct sk_buff *skb) { - return skb_shinfo(skb)->gso_type & SKB_GSO_SHARED_FRAG; + return skb_is_nonlinear(skb) && + skb_shinfo(skb)->tx_flags & SKBTX_SHARED_FRAG; } /** diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 21a22cc..6c1ad09 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2326,8 +2326,7 @@ void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len) { int pos = skb_headlen(skb); - skb_shinfo(skb1)->gso_type = skb_shinfo(skb)->gso_type; - + skb_shinfo(skb)->tx_flags = skb_shinfo(skb1)->tx_flags & SKBTX_SHARED_FRAG; if (len < pos) /* Split line is inside header. */ skb_split_inside_header(skb, skb1, len, pos); else /* Second chunk has no header, nothing to copy. */ @@ -2833,7 +2832,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features) skb_copy_from_linear_data_offset(skb, offset, skb_put(nskb, hsize), hsize); - skb_shinfo(nskb)->gso_type = skb_shinfo(skb)->gso_type; + skb_shinfo(nskb)->tx_flags = skb_shinfo(skb)->tx_flags & SKBTX_SHARED_FRAG; while (pos < offset + len && i < nfrags) { *frag = skb_shinfo(skb)->frags[i]; diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 1aec92b..e6e5d85 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1287,7 +1287,6 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, SKB_GSO_UDP | SKB_GSO_DODGY | SKB_GSO_TCP_ECN | - SKB_GSO_SHARED_FRAG | 0))) goto out; diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 3e98ed2..5e12dca 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -598,6 +598,7 @@ slow_path: /* for offloaded checksums cleanup checksum before fragmentation */ if ((skb->ip_summed == CHECKSUM_PARTIAL) && skb_checksum_help(skb)) goto fail; + iph = ip_hdr(skb); left = skb->len - hlen; /* Space per frame */ ptr = hlen; /* Where to start from */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 801b07b..1f0bedb 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -897,8 +897,7 @@ new_segment: get_page(page); skb_fill_page_desc(skb, i, page, offset, copy); } - - skb_shinfo(skb)->gso_type |= SKB_GSO_SHARED_FRAG; + skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; skb->len += copy; skb->data_len += copy; @@ -3044,7 +3043,6 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, SKB_GSO_DODGY | SKB_GSO_TCP_ECN | SKB_GSO_TCPV6 | - SKB_GSO_SHARED_FRAG | 0) || !(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))) goto out; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d9bfaea..a759e19 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1239,13 +1239,13 @@ static bool tcp_shifted_skb(struct sock *sk, struct sk_buff *skb, */ if (!skb_shinfo(prev)->gso_size) { skb_shinfo(prev)->gso_size = mss; - skb_shinfo(prev)->gso_type |= sk->sk_gso_type; + skb_shinfo(prev)->gso_type = sk->sk_gso_type; } /* CHECKME: To clear or not to clear? Mimics normal skb currently */ if (skb_shinfo(skb)->gso_segs <= 1) { skb_shinfo(skb)->gso_size = 0; - skb_shinfo(skb)->gso_type &= SKB_GSO_SHARED_FRAG; + skb_shinfo(skb)->gso_type = 0; } /* Difference in this won't matter, both ACKed by the same cumul. ACK */ diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 564bf89..6182d90 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1133,7 +1133,6 @@ static void tcp_queue_skb(struct sock *sk, struct sk_buff *skb) static void tcp_set_skb_tso_segs(const struct sock *sk, struct sk_buff *skb, unsigned int mss_now) { - skb_shinfo(skb)->gso_type &= SKB_GSO_SHARED_FRAG; if (skb->len <= mss_now || !sk_can_gso(sk) || skb->ip_summed == CHECKSUM_NONE) { /* Avoid the costly divide in the normal @@ -1141,10 +1140,11 @@ static void tcp_set_skb_tso_segs(const struct sock *sk, struct sk_buff *skb, */ skb_shinfo(skb)->gso_segs = 1; skb_shinfo(skb)->gso_size = 0; + skb_shinfo(skb)->gso_type = 0; } else { skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss_now); skb_shinfo(skb)->gso_size = mss_now; - skb_shinfo(skb)->gso_type |= sk->sk_gso_type; + skb_shinfo(skb)->gso_type = sk->sk_gso_type; } } diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index d141fc3..f26f0da 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -100,7 +100,6 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, SKB_GSO_DODGY | SKB_GSO_TCP_ECN | SKB_GSO_TCPV6 | - SKB_GSO_SHARED_FRAG | 0))) goto out; -- cgit v0.10.2 From 79876e0394aa46e74267a5871c4f4469544dcacf Mon Sep 17 00:00:00 2001 From: Cyril Roelandt Date: Tue, 12 Feb 2013 12:52:30 +0000 Subject: net: ethernet: ti: remove redundant NULL check. cpdma_chan_destroy() on a NULL pointer is a no-op, so the NULL check in cpdma_ctlr_destroy() can safely be removed. Signed-off-by: Cyril Roelandt Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 198cf18..7d3bffd 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -460,10 +460,8 @@ int cpdma_ctlr_destroy(struct cpdma_ctlr *ctlr) if (ctlr->state != CPDMA_STATE_IDLE) cpdma_ctlr_stop(ctlr); - for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) { - if (ctlr->channels[i]) - cpdma_chan_destroy(ctlr->channels[i]); - } + for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) + cpdma_chan_destroy(ctlr->channels[i]); cpdma_desc_pool_destroy(ctlr->pool); spin_unlock_irqrestore(&ctlr->lock, flags); -- cgit v0.10.2 From 9e9ff4b766e25624198b623fe3eda0b3e6c669cd Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 12 Feb 2013 23:05:19 +0000 Subject: be2net: remove BUG_ON() in be_mcc_compl_is_new() The current code expects that the last word (with valid bit) of an MCC compl is DMAed in one shot. This may not be the case. Remove this assertion. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 8b04880..071aea7 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -93,13 +93,16 @@ static void be_mcc_notify(struct be_adapter *adapter) * little endian) */ static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl) { + u32 flags; + if (compl->flags != 0) { - compl->flags = le32_to_cpu(compl->flags); - BUG_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0); - return true; - } else { - return false; + flags = le32_to_cpu(compl->flags); + if (flags & CQE_FLAGS_VALID_MASK) { + compl->flags = flags; + return true; + } } + return false; } /* Need to reset the entire word that houses the valid bit */ -- cgit v0.10.2 From 217a55a338262521d5106dafda2fe7bfff6583be Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 12 Feb 2013 23:14:51 +0000 Subject: bgmac: return error on failed PHY write MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some callers may want to know if PHY write succeed. Also make PHY functions static, they are not exported anywhere. Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 7bc8017..52d9a54 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -535,7 +535,7 @@ static void bgmac_dma_init(struct bgmac *bgmac) * PHY ops **************************************************/ -u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) +static u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) { struct bcma_device *core; u16 phy_access_addr; @@ -584,7 +584,7 @@ u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) } /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ -void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) +static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) { struct bcma_device *core; u16 phy_access_addr; @@ -617,9 +617,13 @@ void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) tmp |= value; bcma_write32(core, phy_access_addr, tmp); - if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) + if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", phyaddr, reg); + return -ETIMEDOUT; + } + + return 0; } /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h index 3dd6f6f..4ede614 100644 --- a/drivers/net/ethernet/broadcom/bgmac.h +++ b/drivers/net/ethernet/broadcom/bgmac.h @@ -450,7 +450,4 @@ static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set) bgmac_maskset(bgmac, offset, ~0, set); } -u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg); -void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value); - #endif /* _BGMAC_H */ -- cgit v0.10.2 From 1e558174637689a53a24b4c94f6f1aed38361b3e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 13 Feb 2013 01:03:49 +0000 Subject: net: sctp: minor: make jsctp_sf_eat_sack static The function jsctp_sf_eat_sack can be made static, no need to extend its visibility. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/net/sctp/probe.c b/net/sctp/probe.c index 5f7518d..4eaaaf6 100644 --- a/net/sctp/probe.c +++ b/net/sctp/probe.c @@ -122,12 +122,12 @@ static const struct file_operations sctpprobe_fops = { .llseek = noop_llseek, }; -sctp_disposition_t jsctp_sf_eat_sack(struct net *net, - const struct sctp_endpoint *ep, - const struct sctp_association *asoc, - const sctp_subtype_t type, - void *arg, - sctp_cmd_seq_t *commands) +static sctp_disposition_t jsctp_sf_eat_sack(struct net *net, + const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + const sctp_subtype_t type, + void *arg, + sctp_cmd_seq_t *commands) { struct sctp_transport *sp; static __u32 lcwnd = 0; -- cgit v0.10.2 From 222229974824a4f30b417531cdc9b5b869d6a6b7 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 13 Feb 2013 01:03:50 +0000 Subject: net: sctp: add build check for sctp_sf_eat_sack_6_2/jsctp_sf_eat_sack In order to avoid any future surprises of kernel panics due to jprobes function mismatches (as e.g. fixed in 4cb9d6eaf85ecd: sctp: jsctp_sf_eat_sack: fix jprobes function signature mismatch), we should check both function types during build and scream loudly if they do not match. __same_type resolves to __builtin_types_compatible_p, which is 1 in case both types are the same and 0 otherwise, qualifiers are ignored. Tested by myself. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/net/sctp/probe.c b/net/sctp/probe.c index 4eaaaf6..261b7b9 100644 --- a/net/sctp/probe.c +++ b/net/sctp/probe.c @@ -183,6 +183,13 @@ static __init int sctpprobe_init(void) { int ret = -ENOMEM; + /* Warning: if the function signature of sctp_sf_eat_sack_6_2, + * has been changed, you also have to change the signature of + * jsctp_sf_eat_sack, otherwise you end up right here! + */ + BUILD_BUG_ON(__same_type(sctp_sf_eat_sack_6_2, + jsctp_sf_eat_sack) == 0); + init_waitqueue_head(&sctpw.wait); spin_lock_init(&sctpw.lock); if (kfifo_alloc(&sctpw.fifo, bufsize, GFP_KERNEL)) -- cgit v0.10.2 From 894e2ac82bd0029adce7ad6c8d25501fdd82c994 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Tue, 12 Feb 2013 23:46:09 +0000 Subject: netfilter: nf_ct_reasm: fix per-netns sysctl initialization Adjusting of data pointers in net/netfilter/nf_conntrack_frag6_* sysctl table for other namespaces points to wrong netns_frags structure and has reversed order of entries. Problem introduced by commit c038a767cd69 in 3.7-rc1 Signed-off-by: Michal Kubecek Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 3dacecc..0156d07 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -97,9 +97,9 @@ static int nf_ct_frag6_sysctl_register(struct net *net) if (table == NULL) goto err_alloc; - table[0].data = &net->ipv6.frags.high_thresh; - table[1].data = &net->ipv6.frags.low_thresh; - table[2].data = &net->ipv6.frags.timeout; + table[0].data = &net->nf_frag.frags.timeout; + table[1].data = &net->nf_frag.frags.low_thresh; + table[2].data = &net->nf_frag.frags.high_thresh; } hdr = register_net_sysctl(net, "net/netfilter", table); -- cgit v0.10.2 From 243a2e63f5f47763b802e9dee8dbf1611a1c1322 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:09 +0000 Subject: bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig index 6dee7bf..aa0d3b2 100644 --- a/net/bridge/Kconfig +++ b/net/bridge/Kconfig @@ -46,3 +46,17 @@ config BRIDGE_IGMP_SNOOPING Say N to exclude this support and reduce the binary size. If unsure, say Y. + +config BRIDGE_VLAN_FILTERING + bool "VLAN filtering" + depends on BRIDGE + depends on VLAN_8021Q + default n + ---help--- + If you say Y here, then the Ethernet bridge will be able selectively + receive and forward traffic based on VLAN information in the packet + any VLAN information configured on the bridge port or bridge device. + + Say N to exclude this support and reduce the binary size. + + If unsure, say Y. diff --git a/net/bridge/Makefile b/net/bridge/Makefile index e859098..e85498b2f 100644 --- a/net/bridge/Makefile +++ b/net/bridge/Makefile @@ -14,4 +14,6 @@ bridge-$(CONFIG_BRIDGE_NETFILTER) += br_netfilter.o bridge-$(CONFIG_BRIDGE_IGMP_SNOOPING) += br_multicast.o br_mdb.o +bridge-$(CONFIG_BRIDGE_VLAN_FILTERING) += br_vlan.o + obj-$(CONFIG_BRIDGE_NF_EBTABLES) += netfilter/ diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 2148d47..af9d65a 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -139,6 +139,7 @@ static void del_nbp(struct net_bridge_port *p) br_ifinfo_notify(RTM_DELLINK, p); + nbp_vlan_flush(p); br_fdb_delete_by_port(br, p, 1); list_del_rcu(&p->list); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 06e85d9..1f3b309 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -18,6 +18,7 @@ #include #include #include +#include #define BR_HASH_BITS 8 #define BR_HASH_SIZE (1 << BR_HASH_BITS) @@ -26,6 +27,7 @@ #define BR_PORT_BITS 10 #define BR_MAX_PORTS (1<priv_flags & IFF_BRIDGE_PORT) @@ -257,6 +272,10 @@ struct net_bridge struct timer_list topology_change_timer; struct timer_list gc_timer; struct kobject *ifobj; +#ifdef CONFIG_BRIDGE_VLAN_FILTERING + u8 vlan_enabled; + struct net_port_vlans __rcu *vlan_info; +#endif }; struct br_input_skb_cb { @@ -531,6 +550,46 @@ static inline void br_mdb_uninit(void) } #endif +/* br_vlan.c */ +#ifdef CONFIG_BRIDGE_VLAN_FILTERING +extern int br_vlan_add(struct net_bridge *br, u16 vid); +extern int br_vlan_delete(struct net_bridge *br, u16 vid); +extern void br_vlan_flush(struct net_bridge *br); +extern int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val); +extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid); +extern int nbp_vlan_delete(struct net_bridge_port *port, u16 vid); +extern void nbp_vlan_flush(struct net_bridge_port *port); +#else +static inline int br_vlan_add(struct net_bridge *br, u16 vid) +{ + return -EOPNOTSUPP; +} + +static inline int br_vlan_delete(struct net_bridge *br, u16 vid) +{ + return -EOPNOTSUPP; +} + +static inline void br_vlan_flush(struct net_bridge *br) +{ +} + +static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid) +{ + return -EOPNOTSUPP; +} + +static inline int nbp_vlan_delete(struct net_bridge_port *port, u16 vid) +{ + return -EOPNOTSUPP; +} + +static inline void nbp_vlan_flush(struct net_bridge_port *port) +{ +} + +#endif + /* br_netfilter.c */ #ifdef CONFIG_BRIDGE_NETFILTER extern int br_netfilter_init(void); diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c index 5913a3a..8baa9c0 100644 --- a/net/bridge/br_sysfs_br.c +++ b/net/bridge/br_sysfs_br.c @@ -691,6 +691,24 @@ static ssize_t store_nf_call_arptables( static DEVICE_ATTR(nf_call_arptables, S_IRUGO | S_IWUSR, show_nf_call_arptables, store_nf_call_arptables); #endif +#ifdef CONFIG_BRIDGE_VLAN_FILTERING +static ssize_t show_vlan_filtering(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct net_bridge *br = to_bridge(d); + return sprintf(buf, "%d\n", br->vlan_enabled); +} + +static ssize_t store_vlan_filtering(struct device *d, + struct device_attribute *attr, + const char *buf, size_t len) +{ + return store_bridge_parm(d, buf, len, br_vlan_filter_toggle); +} +static DEVICE_ATTR(vlan_filtering, S_IRUGO | S_IWUSR, + show_vlan_filtering, store_vlan_filtering); +#endif static struct attribute *bridge_attrs[] = { &dev_attr_forward_delay.attr, @@ -732,6 +750,9 @@ static struct attribute *bridge_attrs[] = { &dev_attr_nf_call_ip6tables.attr, &dev_attr_nf_call_arptables.attr, #endif +#ifdef CONFIG_BRIDGE_VLAN_FILTERING + &dev_attr_vlan_filtering.attr, +#endif NULL }; diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c new file mode 100644 index 0000000..209464e --- /dev/null +++ b/net/bridge/br_vlan.c @@ -0,0 +1,199 @@ +#include +#include +#include +#include + +#include "br_private.h" + +static int __vlan_add(struct net_port_vlans *v, u16 vid) +{ + int err; + + if (test_bit(vid, v->vlan_bitmap)) + return -EEXIST; + + if (v->port_idx && vid) { + struct net_device *dev = v->parent.port->dev; + + /* Add VLAN to the device filter if it is supported. + * Stricly speaking, this is not necessary now, since devices + * are made promiscuous by the bridge, but if that ever changes + * this code will allow tagged traffic to enter the bridge. + */ + if (dev->features & NETIF_F_HW_VLAN_FILTER) { + err = dev->netdev_ops->ndo_vlan_rx_add_vid(dev, vid); + if (err) + return err; + } + } + + set_bit(vid, v->vlan_bitmap); + return 0; +} + +static int __vlan_del(struct net_port_vlans *v, u16 vid) +{ + if (!test_bit(vid, v->vlan_bitmap)) + return -EINVAL; + + if (v->port_idx && vid) { + struct net_device *dev = v->parent.port->dev; + + if (dev->features & NETIF_F_HW_VLAN_FILTER) + dev->netdev_ops->ndo_vlan_rx_kill_vid(dev, vid); + } + + clear_bit(vid, v->vlan_bitmap); + if (bitmap_empty(v->vlan_bitmap, BR_VLAN_BITMAP_LEN)) { + if (v->port_idx) + rcu_assign_pointer(v->parent.port->vlan_info, NULL); + else + rcu_assign_pointer(v->parent.br->vlan_info, NULL); + kfree_rcu(v, rcu); + } + return 0; +} + +static void __vlan_flush(struct net_port_vlans *v) +{ + bitmap_zero(v->vlan_bitmap, BR_VLAN_BITMAP_LEN); + if (v->port_idx) + rcu_assign_pointer(v->parent.port->vlan_info, NULL); + else + rcu_assign_pointer(v->parent.br->vlan_info, NULL); + kfree_rcu(v, rcu); +} + +/* Must be protected by RTNL */ +int br_vlan_add(struct net_bridge *br, u16 vid) +{ + struct net_port_vlans *pv = NULL; + int err; + + ASSERT_RTNL(); + + pv = rtnl_dereference(br->vlan_info); + if (pv) + return __vlan_add(pv, vid); + + /* Create port vlan infomration + */ + pv = kzalloc(sizeof(*pv), GFP_KERNEL); + if (!pv) + return -ENOMEM; + + pv->parent.br = br; + err = __vlan_add(pv, vid); + if (err) + goto out; + + rcu_assign_pointer(br->vlan_info, pv); + return 0; +out: + kfree(pv); + return err; +} + +/* Must be protected by RTNL */ +int br_vlan_delete(struct net_bridge *br, u16 vid) +{ + struct net_port_vlans *pv; + + ASSERT_RTNL(); + + pv = rtnl_dereference(br->vlan_info); + if (!pv) + return -EINVAL; + + __vlan_del(pv, vid); + return 0; +} + +void br_vlan_flush(struct net_bridge *br) +{ + struct net_port_vlans *pv; + + ASSERT_RTNL(); + + pv = rtnl_dereference(br->vlan_info); + if (!pv) + return; + + __vlan_flush(pv); +} + +int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val) +{ + if (!rtnl_trylock()) + return restart_syscall(); + + if (br->vlan_enabled == val) + goto unlock; + + br->vlan_enabled = val; + +unlock: + rtnl_unlock(); + return 0; +} + +/* Must be protected by RTNL */ +int nbp_vlan_add(struct net_bridge_port *port, u16 vid) +{ + struct net_port_vlans *pv = NULL; + int err; + + ASSERT_RTNL(); + + pv = rtnl_dereference(port->vlan_info); + if (pv) + return __vlan_add(pv, vid); + + /* Create port vlan infomration + */ + pv = kzalloc(sizeof(*pv), GFP_KERNEL); + if (!pv) { + err = -ENOMEM; + goto clean_up; + } + + pv->port_idx = port->port_no; + pv->parent.port = port; + err = __vlan_add(pv, vid); + if (err) + goto clean_up; + + rcu_assign_pointer(port->vlan_info, pv); + return 0; + +clean_up: + kfree(pv); + return err; +} + +/* Must be protected by RTNL */ +int nbp_vlan_delete(struct net_bridge_port *port, u16 vid) +{ + struct net_port_vlans *pv; + + ASSERT_RTNL(); + + pv = rtnl_dereference(port->vlan_info); + if (!pv) + return -EINVAL; + + return __vlan_del(pv, vid); +} + +void nbp_vlan_flush(struct net_bridge_port *port) +{ + struct net_port_vlans *pv; + + ASSERT_RTNL(); + + pv = rtnl_dereference(port->vlan_info); + if (!pv) + return; + + __vlan_flush(pv); +} -- cgit v0.10.2 From a37b85c9fbd1dc69fbec3985763f373203eaf9e3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:10 +0000 Subject: bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index ca98fa5..35a2c2c 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -45,6 +45,9 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) brstats->tx_bytes += skb->len; u64_stats_update_end(&brstats->syncp); + if (!br_allowed_ingress(br, br_get_vlan_info(br), skb)) + goto out; + BR_INPUT_SKB_CB(skb)->brdev = dev; skb_reset_mac_header(skb); diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 4b34207..4ef3f6b 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "br_private.h" /* Hook for brouter */ @@ -54,6 +55,9 @@ int br_handle_frame_finish(struct sk_buff *skb) if (!p || p->state == BR_STATE_DISABLED) goto drop; + if (!br_allowed_ingress(p->br, nbp_get_vlan_info(p), skb)) + goto drop; + /* insert into forwarding database after filtering to avoid spoofing */ br = p->br; br_fdb_update(br, p, eth_hdr(skb)->h_source); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 1f3b309..ed7c764 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -552,6 +552,8 @@ static inline void br_mdb_uninit(void) /* br_vlan.c */ #ifdef CONFIG_BRIDGE_VLAN_FILTERING +extern bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, + struct sk_buff *skb); extern int br_vlan_add(struct net_bridge *br, u16 vid); extern int br_vlan_delete(struct net_bridge *br, u16 vid); extern void br_vlan_flush(struct net_bridge *br); @@ -559,7 +561,43 @@ extern int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val); extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid); extern int nbp_vlan_delete(struct net_bridge_port *port, u16 vid); extern void nbp_vlan_flush(struct net_bridge_port *port); + +static inline struct net_port_vlans *br_get_vlan_info( + const struct net_bridge *br) +{ + return rcu_dereference(br->vlan_info); +} + +static inline struct net_port_vlans *nbp_get_vlan_info( + const struct net_bridge_port *p) +{ + return rcu_dereference(p->vlan_info); +} + +/* Since bridge now depends on 8021Q module, but the time bridge sees the + * skb, the vlan tag will always be present if the frame was tagged. + */ +static inline int br_vlan_get_tag(const struct sk_buff *skb, u16 *vid) +{ + int err = 0; + + if (vlan_tx_tag_present(skb)) + *vid = vlan_tx_tag_get(skb) & VLAN_VID_MASK; + else { + *vid = 0; + err = -EINVAL; + } + + return err; +} #else +static inline bool br_allowed_ingress(struct net_bridge *br, + struct net_port_vlans *v, + struct sk_buff *skb) +{ + return true; +} + static inline int br_vlan_add(struct net_bridge *br, u16 vid) { return -EOPNOTSUPP; @@ -588,6 +626,21 @@ static inline void nbp_vlan_flush(struct net_bridge_port *port) { } +static inline struct net_port_vlans *br_get_vlan_info( + const struct net_bridge *br) +{ + return NULL; +} +static inline struct net_port_vlans *nbp_get_vlan_info( + const struct net_bridge_port *p) +{ + return NULL; +} + +static inline u16 br_vlan_get_tag(const struct sk_buff *skb) +{ + return 0; +} #endif /* br_netfilter.c */ diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 209464e..8b4bcd8 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -64,6 +64,31 @@ static void __vlan_flush(struct net_port_vlans *v) kfree_rcu(v, rcu); } +/* Called under RCU */ +bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, + struct sk_buff *skb) +{ + u16 vid; + + /* If VLAN filtering is disabled on the bridge, all packets are + * permitted. + */ + if (!br->vlan_enabled) + return true; + + /* If there are no vlan in the permitted list, all packets are + * rejected. + */ + if (!v) + return false; + + br_vlan_get_tag(skb, &vid); + if (test_bit(vid, v->vlan_bitmap)) + return true; + + return false; +} + /* Must be protected by RTNL */ int br_vlan_add(struct net_bridge *br, u16 vid) { -- cgit v0.10.2 From 85f46c6baef1486ce20e13dd7cdea5dd15be2a90 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:11 +0000 Subject: bridge: Verify that a vlan is allowed to egress on given port When bridge forwards a frame, make sure that a frame is allowed to egress on that port. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 02015a5..35b0671 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -31,6 +31,7 @@ static inline int should_deliver(const struct net_bridge_port *p, const struct sk_buff *skb) { return (((p->flags & BR_HAIRPIN_MODE) || skb->dev != p->dev) && + br_allowed_egress(p->br, nbp_get_vlan_info(p), skb) && p->state == BR_STATE_FORWARDING); } diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 4ef3f6b..787d7da 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -35,6 +35,16 @@ static int br_pass_frame_up(struct sk_buff *skb) brstats->rx_bytes += skb->len; u64_stats_update_end(&brstats->syncp); + /* Bridge is just like any other port. Make sure the + * packet is allowed except in promisc modue when someone + * may be running packet capture. + */ + if (!(brdev->flags & IFF_PROMISC) && + !br_allowed_egress(br, br_get_vlan_info(br), skb)) { + kfree_skb(skb); + return NET_RX_DROP; + } + indev = skb->dev; skb->dev = brdev; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index ed7c764..f0f2461 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -554,6 +554,9 @@ static inline void br_mdb_uninit(void) #ifdef CONFIG_BRIDGE_VLAN_FILTERING extern bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, struct sk_buff *skb); +extern bool br_allowed_egress(struct net_bridge *br, + const struct net_port_vlans *v, + const struct sk_buff *skb); extern int br_vlan_add(struct net_bridge *br, u16 vid); extern int br_vlan_delete(struct net_bridge *br, u16 vid); extern void br_vlan_flush(struct net_bridge *br); @@ -598,6 +601,13 @@ static inline bool br_allowed_ingress(struct net_bridge *br, return true; } +static inline bool br_allowed_egress(struct net_bridge *br, + const struct net_port_vlans *v, + const struct sk_buff *skb) +{ + return true; +} + static inline int br_vlan_add(struct net_bridge *br, u16 vid) { return -EOPNOTSUPP; diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 8b4bcd8..d8690bf 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -89,6 +89,26 @@ bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, return false; } +/* Called under RCU. */ +bool br_allowed_egress(struct net_bridge *br, + const struct net_port_vlans *v, + const struct sk_buff *skb) +{ + u16 vid; + + if (!br->vlan_enabled) + return true; + + if (!v) + return false; + + br_vlan_get_tag(skb, &vid); + if (test_bit(vid, v->vlan_bitmap)) + return true; + + return false; +} + /* Must be protected by RTNL */ int br_vlan_add(struct net_bridge *br, u16 vid) { -- cgit v0.10.2 From 407af3299ef1ac7e87ce3fb530e32a009d1a9efd Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:12 +0000 Subject: bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 25bd46f5..1b90f94 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1020,6 +1020,8 @@ struct net_device_ops { int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev); + int (*ndo_bridge_dellink)(struct net_device *dev, + struct nlmsghdr *nlh); int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier); }; diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 5db2975..3ca9817 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -108,15 +108,24 @@ struct __fdb_entry { * [IFLA_AF_SPEC] = { * [IFLA_BRIDGE_FLAGS] * [IFLA_BRIDGE_MODE] + * [IFLA_BRIDGE_VLAN_INFO] * } */ enum { IFLA_BRIDGE_FLAGS, IFLA_BRIDGE_MODE, + IFLA_BRIDGE_VLAN_INFO, __IFLA_BRIDGE_MAX, }; #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) +#define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ + +struct bridge_vlan_info { + u16 flags; + u16 vid; +}; + /* Bridge multicast database attributes * [MDBA_MDB] = { * [MDBA_MDB_ENTRY] = { diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 35a2c2c..091bedf 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -316,6 +316,7 @@ static const struct net_device_ops br_netdev_ops = { .ndo_fdb_dump = br_fdb_dump, .ndo_bridge_getlink = br_getlink, .ndo_bridge_setlink = br_setlink, + .ndo_bridge_dellink = br_dellink, }; static void br_dev_free(struct net_device *dev) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index af9d65a..335c60c 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "br_private.h" diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 39ca979..534a9f4 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "br_private.h" #include "br_private_stp.h" @@ -119,10 +120,14 @@ nla_put_failure: */ void br_ifinfo_notify(int event, struct net_bridge_port *port) { - struct net *net = dev_net(port->dev); + struct net *net; struct sk_buff *skb; int err = -ENOBUFS; + if (!port) + return; + + net = dev_net(port->dev); br_debug(port->br, "port %u(%s) event %d\n", (unsigned int)port->port_no, port->dev->name, event); @@ -144,6 +149,7 @@ errout: rtnl_set_sk_err(net, RTNLGRP_LINK, err); } + /* * Dump information about all ports, in response to GETLINK */ @@ -162,6 +168,64 @@ out: return err; } +const struct nla_policy ifla_br_policy[IFLA_MAX+1] = { + [IFLA_BRIDGE_FLAGS] = { .type = NLA_U16 }, + [IFLA_BRIDGE_MODE] = { .type = NLA_U16 }, + [IFLA_BRIDGE_VLAN_INFO] = { .type = NLA_BINARY, + .len = sizeof(struct bridge_vlan_info), }, +}; + +static int br_afspec(struct net_bridge *br, + struct net_bridge_port *p, + struct nlattr *af_spec, + int cmd) +{ + struct nlattr *tb[IFLA_BRIDGE_MAX+1]; + int err = 0; + + err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, af_spec, ifla_br_policy); + if (err) + return err; + + if (tb[IFLA_BRIDGE_VLAN_INFO]) { + struct bridge_vlan_info *vinfo; + + vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]); + + if (vinfo->vid >= VLAN_N_VID) + return -EINVAL; + + switch (cmd) { + case RTM_SETLINK: + if (p) { + err = nbp_vlan_add(p, vinfo->vid); + if (err) + break; + + if (vinfo->flags & BRIDGE_VLAN_INFO_MASTER) + err = br_vlan_add(p->br, vinfo->vid); + } else + err = br_vlan_add(br, vinfo->vid); + + if (err) + break; + + break; + + case RTM_DELLINK: + if (p) { + nbp_vlan_delete(p, vinfo->vid); + if (vinfo->flags & BRIDGE_VLAN_INFO_MASTER) + br_vlan_delete(p->br, vinfo->vid); + } else + br_vlan_delete(br, vinfo->vid); + break; + } + } + + return err; +} + static const struct nla_policy ifla_brport_policy[IFLA_BRPORT_MAX + 1] = { [IFLA_BRPORT_STATE] = { .type = NLA_U8 }, [IFLA_BRPORT_COST] = { .type = NLA_U32 }, @@ -241,6 +305,7 @@ int br_setlink(struct net_device *dev, struct nlmsghdr *nlh) { struct ifinfomsg *ifm; struct nlattr *protinfo; + struct nlattr *afspec; struct net_bridge_port *p; struct nlattr *tb[IFLA_BRPORT_MAX + 1]; int err; @@ -248,38 +313,76 @@ int br_setlink(struct net_device *dev, struct nlmsghdr *nlh) ifm = nlmsg_data(nlh); protinfo = nlmsg_find_attr(nlh, sizeof(*ifm), IFLA_PROTINFO); - if (!protinfo) + afspec = nlmsg_find_attr(nlh, sizeof(*ifm), IFLA_AF_SPEC); + if (!protinfo && !afspec) return 0; p = br_port_get_rtnl(dev); - if (!p) + /* We want to accept dev as bridge itself if the AF_SPEC + * is set to see if someone is setting vlan info on the brigde + */ + if (!p && ((dev->priv_flags & IFF_EBRIDGE) && !afspec)) return -EINVAL; - if (protinfo->nla_type & NLA_F_NESTED) { - err = nla_parse_nested(tb, IFLA_BRPORT_MAX, - protinfo, ifla_brport_policy); + if (p && protinfo) { + if (protinfo->nla_type & NLA_F_NESTED) { + err = nla_parse_nested(tb, IFLA_BRPORT_MAX, + protinfo, ifla_brport_policy); + if (err) + return err; + + spin_lock_bh(&p->br->lock); + err = br_setport(p, tb); + spin_unlock_bh(&p->br->lock); + } else { + /* Binary compatability with old RSTP */ + if (nla_len(protinfo) < sizeof(u8)) + return -EINVAL; + + spin_lock_bh(&p->br->lock); + err = br_set_port_state(p, nla_get_u8(protinfo)); + spin_unlock_bh(&p->br->lock); + } if (err) - return err; - - spin_lock_bh(&p->br->lock); - err = br_setport(p, tb); - spin_unlock_bh(&p->br->lock); - } else { - /* Binary compatability with old RSTP */ - if (nla_len(protinfo) < sizeof(u8)) - return -EINVAL; + goto out; + } - spin_lock_bh(&p->br->lock); - err = br_set_port_state(p, nla_get_u8(protinfo)); - spin_unlock_bh(&p->br->lock); + if (afspec) { + err = br_afspec((struct net_bridge *)netdev_priv(dev), p, + afspec, RTM_SETLINK); } if (err == 0) br_ifinfo_notify(RTM_NEWLINK, p); +out: return err; } +/* Delete port information */ +int br_dellink(struct net_device *dev, struct nlmsghdr *nlh) +{ + struct ifinfomsg *ifm; + struct nlattr *afspec; + struct net_bridge_port *p; + int err; + + ifm = nlmsg_data(nlh); + + afspec = nlmsg_find_attr(nlh, sizeof(*ifm), IFLA_AF_SPEC); + if (!afspec) + return 0; + + p = br_port_get_rtnl(dev); + /* We want to accept dev as bridge itself as well */ + if (!p && !(dev->priv_flags & IFF_EBRIDGE)) + return -EINVAL; + + err = br_afspec((struct net_bridge *)netdev_priv(dev), p, + afspec, RTM_DELLINK); + + return err; +} static int br_validate(struct nlattr *tb[], struct nlattr *data[]) { if (tb[IFLA_ADDRESS]) { diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index f0f2461..a42f9d4 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -713,6 +713,7 @@ extern int br_netlink_init(void); extern void br_netlink_fini(void); extern void br_ifinfo_notify(int event, struct net_bridge_port *port); extern int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg); +extern int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg); extern int br_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev); diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index c1e4db6..2c9ccbf 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2464,6 +2464,77 @@ out: return err; } +static int rtnl_bridge_dellink(struct sk_buff *skb, struct nlmsghdr *nlh, + void *arg) +{ + struct net *net = sock_net(skb->sk); + struct ifinfomsg *ifm; + struct net_device *dev; + struct nlattr *br_spec, *attr = NULL; + int rem, err = -EOPNOTSUPP; + u16 oflags, flags = 0; + bool have_flags = false; + + if (nlmsg_len(nlh) < sizeof(*ifm)) + return -EINVAL; + + ifm = nlmsg_data(nlh); + if (ifm->ifi_family != AF_BRIDGE) + return -EPFNOSUPPORT; + + dev = __dev_get_by_index(net, ifm->ifi_index); + if (!dev) { + pr_info("PF_BRIDGE: RTM_SETLINK with unknown ifindex\n"); + return -ENODEV; + } + + br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); + if (br_spec) { + nla_for_each_nested(attr, br_spec, rem) { + if (nla_type(attr) == IFLA_BRIDGE_FLAGS) { + have_flags = true; + flags = nla_get_u16(attr); + break; + } + } + } + + oflags = flags; + + if (!flags || (flags & BRIDGE_FLAGS_MASTER)) { + struct net_device *br_dev = netdev_master_upper_dev_get(dev); + + if (!br_dev || !br_dev->netdev_ops->ndo_bridge_dellink) { + err = -EOPNOTSUPP; + goto out; + } + + err = br_dev->netdev_ops->ndo_bridge_dellink(dev, nlh); + if (err) + goto out; + + flags &= ~BRIDGE_FLAGS_MASTER; + } + + if ((flags & BRIDGE_FLAGS_SELF)) { + if (!dev->netdev_ops->ndo_bridge_dellink) + err = -EOPNOTSUPP; + else + err = dev->netdev_ops->ndo_bridge_dellink(dev, nlh); + + if (!err) + flags &= ~BRIDGE_FLAGS_SELF; + } + + if (have_flags) + memcpy(nla_data(attr), &flags, sizeof(flags)); + /* Generate event to notify upper layer of bridge change */ + if (!err) + err = rtnl_bridge_notify(dev, oflags); +out: + return err; +} + /* Protected by RTNL sempahore. */ static struct rtattr **rta_buf; static int rtattr_max; @@ -2647,6 +2718,7 @@ void __init rtnetlink_init(void) rtnl_register(PF_BRIDGE, RTM_GETNEIGH, NULL, rtnl_fdb_dump, NULL); rtnl_register(PF_BRIDGE, RTM_GETLINK, NULL, rtnl_bridge_getlink, NULL); + rtnl_register(PF_BRIDGE, RTM_DELLINK, rtnl_bridge_dellink, NULL, NULL); rtnl_register(PF_BRIDGE, RTM_SETLINK, rtnl_bridge_setlink, NULL, NULL); } -- cgit v0.10.2 From 6cbdceeb1cb12c7d620161925a8c3e81daadb2e4 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:13 +0000 Subject: bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 6999269..4e2aa47 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7079,7 +7079,8 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev, } static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev) + struct net_device *dev, + u32 filter_mask) { struct ixgbe_adapter *adapter = netdev_priv(dev); u16 mode; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 1b90f94..1964ca6 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1019,7 +1019,8 @@ struct net_device_ops { struct nlmsghdr *nlh); int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev); + struct net_device *dev, + u32 filter_mask); int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh); int (*ndo_change_carrier)(struct net_device *dev, diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 7a5eb19..7a2144e 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -630,6 +630,7 @@ struct tcamsg { /* New extended info filters for IFLA_EXT_MASK */ #define RTEXT_FILTER_VF (1 << 0) +#define RTEXT_FILTER_BRVLAN (1 << 1) /* End of information exported to user level */ diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 534a9f4..fe1980d 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -65,15 +65,21 @@ static int br_port_fill_attrs(struct sk_buff *skb, * Create one netlink message for one interface * Contains port and master info as well as carrier and bridge state. */ -static int br_fill_ifinfo(struct sk_buff *skb, const struct net_bridge_port *port, - u32 pid, u32 seq, int event, unsigned int flags) +static int br_fill_ifinfo(struct sk_buff *skb, + const struct net_bridge_port *port, + u32 pid, u32 seq, int event, unsigned int flags, + u32 filter_mask, const struct net_device *dev) { - const struct net_bridge *br = port->br; - const struct net_device *dev = port->dev; + const struct net_bridge *br; struct ifinfomsg *hdr; struct nlmsghdr *nlh; u8 operstate = netif_running(dev) ? dev->operstate : IF_OPER_DOWN; + if (port) + br = port->br; + else + br = netdev_priv(dev); + br_debug(br, "br_fill_info event %d port %s master %s\n", event, dev->name, br->dev->name); @@ -99,7 +105,7 @@ static int br_fill_ifinfo(struct sk_buff *skb, const struct net_bridge_port *por nla_put_u32(skb, IFLA_LINK, dev->iflink))) goto nla_put_failure; - if (event == RTM_NEWLINK) { + if (event == RTM_NEWLINK && port) { struct nlattr *nest = nla_nest_start(skb, IFLA_PROTINFO | NLA_F_NESTED); @@ -108,6 +114,40 @@ static int br_fill_ifinfo(struct sk_buff *skb, const struct net_bridge_port *por nla_nest_end(skb, nest); } + /* Check if the VID information is requested */ + if (filter_mask & RTEXT_FILTER_BRVLAN) { + struct nlattr *af; + const struct net_port_vlans *pv; + struct bridge_vlan_info vinfo; + u16 vid; + + if (port) + pv = nbp_get_vlan_info(port); + else + pv = br_get_vlan_info(br); + + if (!pv || bitmap_empty(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN)) + goto done; + + af = nla_nest_start(skb, IFLA_AF_SPEC); + if (!af) + goto nla_put_failure; + + for (vid = find_first_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN); + vid < BR_VLAN_BITMAP_LEN; + vid = find_next_bit(pv->vlan_bitmap, + BR_VLAN_BITMAP_LEN, vid+1)) { + vinfo.vid = vid; + vinfo.flags = 0; + if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO, + sizeof(vinfo), &vinfo)) + goto nla_put_failure; + } + + nla_nest_end(skb, af); + } + +done: return nlmsg_end(skb, nlh); nla_put_failure: @@ -135,7 +175,7 @@ void br_ifinfo_notify(int event, struct net_bridge_port *port) if (skb == NULL) goto errout; - err = br_fill_ifinfo(skb, port, 0, 0, event, 0); + err = br_fill_ifinfo(skb, port, 0, 0, event, 0, 0, port->dev); if (err < 0) { /* -EMSGSIZE implies BUG in br_nlmsg_size() */ WARN_ON(err == -EMSGSIZE); @@ -154,16 +194,17 @@ errout: * Dump information about all ports, in response to GETLINK */ int br_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev) + struct net_device *dev, u32 filter_mask) { int err = 0; struct net_bridge_port *port = br_port_get_rcu(dev); - /* not a bridge port */ - if (!port) + /* not a bridge port and */ + if (!port && !(filter_mask & RTEXT_FILTER_BRVLAN)) goto out; - err = br_fill_ifinfo(skb, port, pid, seq, RTM_NEWLINK, NLM_F_MULTI); + err = br_fill_ifinfo(skb, port, pid, seq, RTM_NEWLINK, NLM_F_MULTI, + filter_mask, dev); out: return err; } @@ -395,6 +436,29 @@ static int br_validate(struct nlattr *tb[], struct nlattr *data[]) return 0; } +static size_t br_get_link_af_size(const struct net_device *dev) +{ + struct net_port_vlans *pv; + + if (br_port_exists(dev)) + pv = nbp_get_vlan_info(br_port_get_rcu(dev)); + else if (dev->priv_flags & IFF_EBRIDGE) + pv = br_get_vlan_info((struct net_bridge *)netdev_priv(dev)); + else + return 0; + + if (!pv) + return 0; + + /* Each VLAN is returned in bridge_vlan_info along with flags */ + return pv->num_vlans * nla_total_size(sizeof(struct bridge_vlan_info)); +} + +struct rtnl_af_ops br_af_ops = { + .family = AF_BRIDGE, + .get_link_af_size = br_get_link_af_size, +}; + struct rtnl_link_ops br_link_ops __read_mostly = { .kind = "bridge", .priv_size = sizeof(struct net_bridge), @@ -408,11 +472,18 @@ int __init br_netlink_init(void) int err; br_mdb_init(); - err = rtnl_link_register(&br_link_ops); + err = rtnl_af_register(&br_af_ops); if (err) goto out; + err = rtnl_link_register(&br_link_ops); + if (err) + goto out_af; + return 0; + +out_af: + rtnl_af_unregister(&br_af_ops); out: br_mdb_uninit(); return err; @@ -421,5 +492,6 @@ out: void __exit br_netlink_fini(void) { br_mdb_uninit(); + rtnl_af_unregister(&br_af_ops); rtnl_link_unregister(&br_link_ops); } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index a42f9d4..ce22352 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -73,6 +73,7 @@ struct net_port_vlans { } parent; struct rcu_head rcu; unsigned long vlan_bitmap[BR_VLAN_BITMAP_LEN]; + u16 num_vlans; }; struct net_bridge_fdb_entry @@ -715,7 +716,7 @@ extern void br_ifinfo_notify(int event, struct net_bridge_port *port); extern int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg); extern int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg); extern int br_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev); + struct net_device *dev, u32 filter_mask); #ifdef CONFIG_SYSFS /* br_sysfs_if.c */ diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index d8690bf..f2bf5a1 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -28,6 +28,7 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid) } set_bit(vid, v->vlan_bitmap); + v->num_vlans++; return 0; } @@ -44,6 +45,7 @@ static int __vlan_del(struct net_port_vlans *v, u16 vid) } clear_bit(vid, v->vlan_bitmap); + v->num_vlans--; if (bitmap_empty(v->vlan_bitmap, BR_VLAN_BITMAP_LEN)) { if (v->port_idx) rcu_assign_pointer(v->parent.port->vlan_info, NULL); diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 2c9ccbf..f3a112e 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2315,6 +2315,13 @@ static int rtnl_bridge_getlink(struct sk_buff *skb, struct netlink_callback *cb) int idx = 0; u32 portid = NETLINK_CB(cb->skb).portid; u32 seq = cb->nlh->nlmsg_seq; + struct nlattr *extfilt; + u32 filter_mask = 0; + + extfilt = nlmsg_find_attr(cb->nlh, sizeof(struct rtgenmsg), + IFLA_EXT_MASK); + if (extfilt) + filter_mask = nla_get_u32(extfilt); rcu_read_lock(); for_each_netdev_rcu(net, dev) { @@ -2324,14 +2331,15 @@ static int rtnl_bridge_getlink(struct sk_buff *skb, struct netlink_callback *cb) if (br_dev && br_dev->netdev_ops->ndo_bridge_getlink) { if (idx >= cb->args[0] && br_dev->netdev_ops->ndo_bridge_getlink( - skb, portid, seq, dev) < 0) + skb, portid, seq, dev, filter_mask) < 0) break; idx++; } if (ops->ndo_bridge_getlink) { if (idx >= cb->args[0] && - ops->ndo_bridge_getlink(skb, portid, seq, dev) < 0) + ops->ndo_bridge_getlink(skb, portid, seq, dev, + filter_mask) < 0) break; idx++; } @@ -2372,14 +2380,14 @@ static int rtnl_bridge_notify(struct net_device *dev, u16 flags) if ((!flags || (flags & BRIDGE_FLAGS_MASTER)) && br_dev && br_dev->netdev_ops->ndo_bridge_getlink) { - err = br_dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev); + err = br_dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0); if (err < 0) goto errout; } if ((flags & BRIDGE_FLAGS_SELF) && dev->netdev_ops->ndo_bridge_getlink) { - err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev); + err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0); if (err < 0) goto errout; } -- cgit v0.10.2 From 7885198861fc9a3dfdc6bb90dc0ba12689d6cd57 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:14 +0000 Subject: bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 71b64fd..f3b6f51 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -144,6 +144,7 @@ err_free: kfree_skb(skb); return NULL; } +EXPORT_SYMBOL(vlan_untag); /* diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 091bedf..9509139 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -30,6 +30,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) struct net_bridge_fdb_entry *dst; struct net_bridge_mdb_entry *mdst; struct br_cpu_netstats *brstats = this_cpu_ptr(br->stats); + u16 vid = 0; rcu_read_lock(); #ifdef CONFIG_BRIDGE_NETFILTER @@ -45,7 +46,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) brstats->tx_bytes += skb->len; u64_stats_update_end(&brstats->syncp); - if (!br_allowed_ingress(br, br_get_vlan_info(br), skb)) + if (!br_allowed_ingress(br, br_get_vlan_info(br), skb, &vid)) goto out; BR_INPUT_SKB_CB(skb)->brdev = dev; diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 35b0671..092b20e 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -64,6 +64,10 @@ int br_forward_finish(struct sk_buff *skb) static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb) { + skb = br_handle_vlan(to->br, nbp_get_vlan_info(to), skb); + if (!skb) + return; + skb->dev = to->dev; if (unlikely(netpoll_tx_running(to->br->dev))) { @@ -89,6 +93,10 @@ static void __br_forward(const struct net_bridge_port *to, struct sk_buff *skb) return; } + skb = br_handle_vlan(to->br, nbp_get_vlan_info(to), skb); + if (!skb) + return; + indev = skb->dev; skb->dev = to->dev; skb_forward_csum(skb); diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 787d7da..a63f227 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -45,6 +45,10 @@ static int br_pass_frame_up(struct sk_buff *skb) return NET_RX_DROP; } + skb = br_handle_vlan(br, br_get_vlan_info(br), skb); + if (!skb) + return NET_RX_DROP; + indev = skb->dev; skb->dev = brdev; @@ -61,11 +65,12 @@ int br_handle_frame_finish(struct sk_buff *skb) struct net_bridge_fdb_entry *dst; struct net_bridge_mdb_entry *mdst; struct sk_buff *skb2; + u16 vid = 0; if (!p || p->state == BR_STATE_DISABLED) goto drop; - if (!br_allowed_ingress(p->br, nbp_get_vlan_info(p), skb)) + if (!br_allowed_ingress(p->br, nbp_get_vlan_info(p), skb, &vid)) goto drop; /* insert into forwarding database after filtering to avoid spoofing */ diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index ce22352..ea8e7ef 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -67,6 +67,7 @@ struct br_ip struct net_port_vlans { u16 port_idx; + u16 pvid; union { struct net_bridge_port *port; struct net_bridge *br; @@ -554,10 +555,13 @@ static inline void br_mdb_uninit(void) /* br_vlan.c */ #ifdef CONFIG_BRIDGE_VLAN_FILTERING extern bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, - struct sk_buff *skb); + struct sk_buff *skb, u16 *vid); extern bool br_allowed_egress(struct net_bridge *br, const struct net_port_vlans *v, const struct sk_buff *skb); +extern struct sk_buff *br_handle_vlan(struct net_bridge *br, + const struct net_port_vlans *v, + struct sk_buff *skb); extern int br_vlan_add(struct net_bridge *br, u16 vid); extern int br_vlan_delete(struct net_bridge *br, u16 vid); extern void br_vlan_flush(struct net_bridge *br); @@ -594,10 +598,23 @@ static inline int br_vlan_get_tag(const struct sk_buff *skb, u16 *vid) return err; } + +static inline u16 br_get_pvid(const struct net_port_vlans *v) +{ + /* Return just the VID if it is set, or VLAN_N_VID (invalid vid) if + * vid wasn't set + */ + smp_rmb(); + return (v->pvid & VLAN_TAG_PRESENT) ? + (v->pvid & ~VLAN_TAG_PRESENT) : + VLAN_N_VID; +} + #else static inline bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, - struct sk_buff *skb) + struct sk_buff *skb, + u16 *vid) { return true; } @@ -609,6 +626,13 @@ static inline bool br_allowed_egress(struct net_bridge *br, return true; } +static inline struct sk_buff *br_handle_vlan(struct net_bridge *br, + const struct net_port_vlans *v, + struct sk_buff *skb) +{ + return skb; +} + static inline int br_vlan_add(struct net_bridge *br, u16 vid) { return -EOPNOTSUPP; @@ -648,10 +672,14 @@ static inline struct net_port_vlans *nbp_get_vlan_info( return NULL; } -static inline u16 br_vlan_get_tag(const struct sk_buff *skb) +static inline u16 br_vlan_get_tag(const struct sk_buff *skb, u16 *tag) { return 0; } +static inline u16 br_get_pvid(const struct net_port_vlans *v) +{ + return VLAN_N_VID; /* Returns invalid vid */ +} #endif /* br_netfilter.c */ diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index f2bf5a1..20057de 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -66,12 +66,68 @@ static void __vlan_flush(struct net_port_vlans *v) kfree_rcu(v, rcu); } -/* Called under RCU */ -bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, - struct sk_buff *skb) +/* Strip the tag from the packet. Will return skb with tci set 0. */ +static struct sk_buff *br_vlan_untag(struct sk_buff *skb) +{ + if (skb->protocol != htons(ETH_P_8021Q)) { + skb->vlan_tci = 0; + return skb; + } + + skb->vlan_tci = 0; + skb = vlan_untag(skb); + if (skb) + skb->vlan_tci = 0; + + return skb; +} + +struct sk_buff *br_handle_vlan(struct net_bridge *br, + const struct net_port_vlans *pv, + struct sk_buff *skb) { u16 vid; + if (!br->vlan_enabled) + goto out; + + /* At this point, we know that the frame was filtered and contains + * a valid vlan id. If the vlan id matches the pvid of current port + * send untagged; otherwise, send taged. + */ + br_vlan_get_tag(skb, &vid); + if (vid == br_get_pvid(pv)) + skb = br_vlan_untag(skb); + else { + /* Egress policy says "send tagged". If output device + * is the bridge, we need to add the VLAN header + * ourselves since we'll be going through the RX path. + * Sending to ports puts the frame on the TX path and + * we let dev_hard_start_xmit() add the header. + */ + if (skb->protocol != htons(ETH_P_8021Q) && + pv->port_idx == 0) { + /* vlan_put_tag expects skb->data to point to + * mac header. + */ + skb_push(skb, ETH_HLEN); + skb = __vlan_put_tag(skb, skb->vlan_tci); + if (!skb) + goto out; + /* put skb->data back to where it was */ + skb_pull(skb, ETH_HLEN); + skb->vlan_tci = 0; + } + } + +out: + return skb; +} + +/* Called under RCU */ +bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, + struct sk_buff *skb, u16 *vid) +{ /* If VLAN filtering is disabled on the bridge, all packets are * permitted. */ @@ -84,8 +140,25 @@ bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, if (!v) return false; - br_vlan_get_tag(skb, &vid); - if (test_bit(vid, v->vlan_bitmap)) + if (br_vlan_get_tag(skb, vid)) { + u16 pvid = br_get_pvid(v); + + /* Frame did not have a tag. See if pvid is set + * on this port. That tells us which vlan untagged + * traffic belongs to. + */ + if (pvid == VLAN_N_VID) + return false; + + /* PVID is set on this port. Any untagged ingress + * frame is considered to belong to this vlan. + */ + __vlan_hwaccel_put_tag(skb, pvid); + return true; + } + + /* Frame had a valid vlan tag. See if vlan is allowed */ + if (test_bit(*vid, v->vlan_bitmap)) return true; return false; -- cgit v0.10.2 From 552406c488ec2cf1aaf8b5bd24d1750c9fd6d8cc Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:15 +0000 Subject: bridge: Add the ability to configure pvid A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 3ca9817..c6c30e2 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -120,6 +120,7 @@ enum { #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) #define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ +#define BRIDGE_VLAN_INFO_PVID (1<<1) /* VLAN is PVID, ingress untagged */ struct bridge_vlan_info { u16 flags; diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index fe1980d..e044cc0 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -120,6 +120,7 @@ static int br_fill_ifinfo(struct sk_buff *skb, const struct net_port_vlans *pv; struct bridge_vlan_info vinfo; u16 vid; + u16 pvid; if (port) pv = nbp_get_vlan_info(port); @@ -133,12 +134,15 @@ static int br_fill_ifinfo(struct sk_buff *skb, if (!af) goto nla_put_failure; + pvid = br_get_pvid(pv); for (vid = find_first_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN); vid < BR_VLAN_BITMAP_LEN; vid = find_next_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN, vid+1)) { vinfo.vid = vid; vinfo.flags = 0; + if (vid == pvid) + vinfo.flags |= BRIDGE_VLAN_INFO_PVID; if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO, sizeof(vinfo), &vinfo)) goto nla_put_failure; @@ -239,14 +243,15 @@ static int br_afspec(struct net_bridge *br, switch (cmd) { case RTM_SETLINK: if (p) { - err = nbp_vlan_add(p, vinfo->vid); + err = nbp_vlan_add(p, vinfo->vid, vinfo->flags); if (err) break; if (vinfo->flags & BRIDGE_VLAN_INFO_MASTER) - err = br_vlan_add(p->br, vinfo->vid); + err = br_vlan_add(p->br, vinfo->vid, + vinfo->flags); } else - err = br_vlan_add(br, vinfo->vid); + err = br_vlan_add(br, vinfo->vid, vinfo->flags); if (err) break; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index ea8e7ef..1ae6395 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -562,11 +562,11 @@ extern bool br_allowed_egress(struct net_bridge *br, extern struct sk_buff *br_handle_vlan(struct net_bridge *br, const struct net_port_vlans *v, struct sk_buff *skb); -extern int br_vlan_add(struct net_bridge *br, u16 vid); +extern int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags); extern int br_vlan_delete(struct net_bridge *br, u16 vid); extern void br_vlan_flush(struct net_bridge *br); extern int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val); -extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid); +extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags); extern int nbp_vlan_delete(struct net_bridge_port *port, u16 vid); extern void nbp_vlan_flush(struct net_bridge_port *port); @@ -633,7 +633,7 @@ static inline struct sk_buff *br_handle_vlan(struct net_bridge *br, return skb; } -static inline int br_vlan_add(struct net_bridge *br, u16 vid) +static inline int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags) { return -EOPNOTSUPP; } @@ -647,7 +647,7 @@ static inline void br_vlan_flush(struct net_bridge *br) { } -static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid) +static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags) { return -EOPNOTSUPP; } diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 20057de..c79940c 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -5,12 +5,33 @@ #include "br_private.h" -static int __vlan_add(struct net_port_vlans *v, u16 vid) +static void __vlan_add_pvid(struct net_port_vlans *v, u16 vid) +{ + if (v->pvid == vid) + return; + + smp_wmb(); + v->pvid = vid; +} + +static void __vlan_delete_pvid(struct net_port_vlans *v, u16 vid) +{ + if (v->pvid != vid) + return; + + smp_wmb(); + v->pvid = 0; +} + +static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) { int err; - if (test_bit(vid, v->vlan_bitmap)) - return -EEXIST; + if (test_bit(vid, v->vlan_bitmap)) { + if (flags & BRIDGE_VLAN_INFO_PVID) + __vlan_add_pvid(v, vid); + return 0; + } if (v->port_idx && vid) { struct net_device *dev = v->parent.port->dev; @@ -29,6 +50,9 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid) set_bit(vid, v->vlan_bitmap); v->num_vlans++; + if (flags & BRIDGE_VLAN_INFO_PVID) + __vlan_add_pvid(v, vid); + return 0; } @@ -37,6 +61,8 @@ static int __vlan_del(struct net_port_vlans *v, u16 vid) if (!test_bit(vid, v->vlan_bitmap)) return -EINVAL; + __vlan_delete_pvid(v, vid); + if (v->port_idx && vid) { struct net_device *dev = v->parent.port->dev; @@ -58,6 +84,8 @@ static int __vlan_del(struct net_port_vlans *v, u16 vid) static void __vlan_flush(struct net_port_vlans *v) { + smp_wmb(); + v->pvid = 0; bitmap_zero(v->vlan_bitmap, BR_VLAN_BITMAP_LEN); if (v->port_idx) rcu_assign_pointer(v->parent.port->vlan_info, NULL); @@ -185,7 +213,7 @@ bool br_allowed_egress(struct net_bridge *br, } /* Must be protected by RTNL */ -int br_vlan_add(struct net_bridge *br, u16 vid) +int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags) { struct net_port_vlans *pv = NULL; int err; @@ -194,7 +222,7 @@ int br_vlan_add(struct net_bridge *br, u16 vid) pv = rtnl_dereference(br->vlan_info); if (pv) - return __vlan_add(pv, vid); + return __vlan_add(pv, vid, flags); /* Create port vlan infomration */ @@ -203,7 +231,7 @@ int br_vlan_add(struct net_bridge *br, u16 vid) return -ENOMEM; pv->parent.br = br; - err = __vlan_add(pv, vid); + err = __vlan_add(pv, vid, flags); if (err) goto out; @@ -234,7 +262,6 @@ void br_vlan_flush(struct net_bridge *br) struct net_port_vlans *pv; ASSERT_RTNL(); - pv = rtnl_dereference(br->vlan_info); if (!pv) return; @@ -258,7 +285,7 @@ unlock: } /* Must be protected by RTNL */ -int nbp_vlan_add(struct net_bridge_port *port, u16 vid) +int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags) { struct net_port_vlans *pv = NULL; int err; @@ -267,7 +294,7 @@ int nbp_vlan_add(struct net_bridge_port *port, u16 vid) pv = rtnl_dereference(port->vlan_info); if (pv) - return __vlan_add(pv, vid); + return __vlan_add(pv, vid, flags); /* Create port vlan infomration */ @@ -279,7 +306,7 @@ int nbp_vlan_add(struct net_bridge_port *port, u16 vid) pv->port_idx = port->port_no; pv->parent.port = port; - err = __vlan_add(pv, vid); + err = __vlan_add(pv, vid, flags); if (err) goto clean_up; -- cgit v0.10.2 From 2ba071ecb6d41ce172f9ccb3996f28cb337b3576 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:16 +0000 Subject: bridge: Add vlan to unicast fdb entries This patch adds vlan to unicast fdb entries that are created for learned addresses (not the manually configured ones). It adds vlan id into the hash mix and uses vlan as an addditional parameter for an entry match. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 9509139..d5f1d3f 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -71,7 +71,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) br_multicast_deliver(mdst, skb); else br_flood_deliver(br, skb); - } else if ((dst = __br_fdb_get(br, dest)) != NULL) + } else if ((dst = __br_fdb_get(br, dest, vid)) != NULL) br_deliver(dst->dst, skb); else br_flood_deliver(br, skb); diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index d9576e6..276a522 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "br_private.h" static struct kmem_cache *br_fdb_cache __read_mostly; @@ -67,11 +68,11 @@ static inline int has_expired(const struct net_bridge *br, time_before_eq(fdb->updated + hold_time(br), jiffies); } -static inline int br_mac_hash(const unsigned char *mac) +static inline int br_mac_hash(const unsigned char *mac, __u16 vid) { - /* use 1 byte of OUI cnd 3 bytes of NIC */ + /* use 1 byte of OUI and 3 bytes of NIC */ u32 key = get_unaligned((u32 *)(mac + 2)); - return jhash_1word(key, fdb_salt) & (BR_HASH_SIZE - 1); + return jhash_2words(key, vid, fdb_salt) & (BR_HASH_SIZE - 1); } static void fdb_rcu_free(struct rcu_head *head) @@ -132,7 +133,7 @@ void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr) struct net_bridge_fdb_entry *f; /* If old entry was unassociated with any port, then delete it. */ - f = __br_fdb_get(br, br->dev->dev_addr); + f = __br_fdb_get(br, br->dev->dev_addr, 0); if (f && f->is_local && !f->dst) fdb_delete(br, f); @@ -231,13 +232,16 @@ void br_fdb_delete_by_port(struct net_bridge *br, /* No locking or refcounting, assumes caller has rcu_read_lock */ struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br, - const unsigned char *addr) + const unsigned char *addr, + __u16 vid) { struct hlist_node *h; struct net_bridge_fdb_entry *fdb; - hlist_for_each_entry_rcu(fdb, h, &br->hash[br_mac_hash(addr)], hlist) { - if (ether_addr_equal(fdb->addr.addr, addr)) { + hlist_for_each_entry_rcu(fdb, h, + &br->hash[br_mac_hash(addr, vid)], hlist) { + if (ether_addr_equal(fdb->addr.addr, addr) && + fdb->vlan_id == vid) { if (unlikely(has_expired(br, fdb))) break; return fdb; @@ -261,7 +265,7 @@ int br_fdb_test_addr(struct net_device *dev, unsigned char *addr) if (!port) ret = 0; else { - fdb = __br_fdb_get(port->br, addr); + fdb = __br_fdb_get(port->br, addr, 0); ret = fdb && fdb->dst && fdb->dst->dev != dev && fdb->dst->state == BR_STATE_FORWARDING; } @@ -325,26 +329,30 @@ int br_fdb_fillbuf(struct net_bridge *br, void *buf, } static struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head, - const unsigned char *addr) + const unsigned char *addr, + __u16 vid) { struct hlist_node *h; struct net_bridge_fdb_entry *fdb; hlist_for_each_entry(fdb, h, head, hlist) { - if (ether_addr_equal(fdb->addr.addr, addr)) + if (ether_addr_equal(fdb->addr.addr, addr) && + fdb->vlan_id == vid) return fdb; } return NULL; } static struct net_bridge_fdb_entry *fdb_find_rcu(struct hlist_head *head, - const unsigned char *addr) + const unsigned char *addr, + __u16 vid) { struct hlist_node *h; struct net_bridge_fdb_entry *fdb; hlist_for_each_entry_rcu(fdb, h, head, hlist) { - if (ether_addr_equal(fdb->addr.addr, addr)) + if (ether_addr_equal(fdb->addr.addr, addr) && + fdb->vlan_id == vid) return fdb; } return NULL; @@ -352,7 +360,8 @@ static struct net_bridge_fdb_entry *fdb_find_rcu(struct hlist_head *head, static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head, struct net_bridge_port *source, - const unsigned char *addr) + const unsigned char *addr, + __u16 vid) { struct net_bridge_fdb_entry *fdb; @@ -360,6 +369,7 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head, if (fdb) { memcpy(fdb->addr.addr, addr, ETH_ALEN); fdb->dst = source; + fdb->vlan_id = vid; fdb->is_local = 0; fdb->is_static = 0; fdb->updated = fdb->used = jiffies; @@ -371,13 +381,13 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head, static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source, const unsigned char *addr) { - struct hlist_head *head = &br->hash[br_mac_hash(addr)]; + struct hlist_head *head = &br->hash[br_mac_hash(addr, 0)]; struct net_bridge_fdb_entry *fdb; if (!is_valid_ether_addr(addr)) return -EINVAL; - fdb = fdb_find(head, addr); + fdb = fdb_find(head, addr, 0); if (fdb) { /* it is okay to have multiple ports with same * address, just use the first one. @@ -390,7 +400,7 @@ static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source, fdb_delete(br, fdb); } - fdb = fdb_create(head, source, addr); + fdb = fdb_create(head, source, addr, 0); if (!fdb) return -ENOMEM; @@ -412,9 +422,9 @@ int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source, } void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source, - const unsigned char *addr) + const unsigned char *addr, u16 vid) { - struct hlist_head *head = &br->hash[br_mac_hash(addr)]; + struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)]; struct net_bridge_fdb_entry *fdb; /* some users want to always flood. */ @@ -426,7 +436,7 @@ void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source, source->state == BR_STATE_FORWARDING)) return; - fdb = fdb_find_rcu(head, addr); + fdb = fdb_find_rcu(head, addr, vid); if (likely(fdb)) { /* attempt to update an entry for a local interface */ if (unlikely(fdb->is_local)) { @@ -441,8 +451,8 @@ void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source, } } else { spin_lock(&br->hash_lock); - if (likely(!fdb_find(head, addr))) { - fdb = fdb_create(head, source, addr); + if (likely(!fdb_find(head, addr, vid))) { + fdb = fdb_create(head, source, addr, vid); if (fdb) fdb_notify(br, fdb, RTM_NEWNEIGH); } @@ -571,18 +581,18 @@ out: /* Update (create or replace) forwarding database entry */ static int fdb_add_entry(struct net_bridge_port *source, const __u8 *addr, - __u16 state, __u16 flags) + __u16 state, __u16 flags, __u16 vid) { struct net_bridge *br = source->br; - struct hlist_head *head = &br->hash[br_mac_hash(addr)]; + struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)]; struct net_bridge_fdb_entry *fdb; - fdb = fdb_find(head, addr); + fdb = fdb_find(head, addr, vid); if (fdb == NULL) { if (!(flags & NLM_F_CREATE)) return -ENOENT; - fdb = fdb_create(head, source, addr); + fdb = fdb_create(head, source, addr, vid); if (!fdb) return -ENOMEM; fdb_notify(br, fdb, RTM_NEWNEIGH); @@ -629,11 +639,12 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], if (ndm->ndm_flags & NTF_USE) { rcu_read_lock(); - br_fdb_update(p->br, p, addr); + br_fdb_update(p->br, p, addr, 0); rcu_read_unlock(); } else { spin_lock_bh(&p->br->hash_lock); - err = fdb_add_entry(p, addr, ndm->ndm_state, nlh_flags); + err = fdb_add_entry(p, addr, ndm->ndm_state, nlh_flags, + 0); spin_unlock_bh(&p->br->hash_lock); } @@ -643,10 +654,10 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], static int fdb_delete_by_addr(struct net_bridge_port *p, const u8 *addr) { struct net_bridge *br = p->br; - struct hlist_head *head = &br->hash[br_mac_hash(addr)]; + struct hlist_head *head = &br->hash[br_mac_hash(addr, 0)]; struct net_bridge_fdb_entry *fdb; - fdb = fdb_find(head, addr); + fdb = fdb_find(head, addr, 0); if (!fdb) return -ENOENT; diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index a63f227..4803301 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -75,7 +75,7 @@ int br_handle_frame_finish(struct sk_buff *skb) /* insert into forwarding database after filtering to avoid spoofing */ br = p->br; - br_fdb_update(br, p, eth_hdr(skb)->h_source); + br_fdb_update(br, p, eth_hdr(skb)->h_source, vid); if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) && br_multicast_rcv(br, p, skb)) @@ -110,7 +110,8 @@ int br_handle_frame_finish(struct sk_buff *skb) skb2 = skb; br->dev->stats.multicast++; - } else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) { + } else if ((dst = __br_fdb_get(br, dest, vid)) && + dst->is_local) { skb2 = skb; /* Do not forward the packet since it's local. */ skb = NULL; @@ -138,8 +139,10 @@ drop: static int br_handle_local_finish(struct sk_buff *skb) { struct net_bridge_port *p = br_port_get_rcu(skb->dev); + u16 vid = 0; - br_fdb_update(p->br, p, eth_hdr(skb)->h_source); + br_vlan_get_tag(skb, &vid); + br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid); return 0; /* process further */ } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 1ae6395..f4ae87b 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -88,6 +88,7 @@ struct net_bridge_fdb_entry mac_addr addr; unsigned char is_local; unsigned char is_static; + __u16 vlan_id; }; struct net_bridge_port_group { @@ -373,7 +374,8 @@ extern void br_fdb_cleanup(unsigned long arg); extern void br_fdb_delete_by_port(struct net_bridge *br, const struct net_bridge_port *p, int do_all); extern struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br, - const unsigned char *addr); + const unsigned char *addr, + __u16 vid); extern int br_fdb_test_addr(struct net_device *dev, unsigned char *addr); extern int br_fdb_fillbuf(struct net_bridge *br, void *buf, unsigned long count, unsigned long off); @@ -382,7 +384,8 @@ extern int br_fdb_insert(struct net_bridge *br, const unsigned char *addr); extern void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source, - const unsigned char *addr); + const unsigned char *addr, + u16 vid); extern int br_fdb_delete(struct ndmsg *ndm, struct net_device *dev, -- cgit v0.10.2 From b0e9a30dd669a844bb4f74515f8bcd307018ffd0 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:17 +0000 Subject: bridge: Add vlan id to multicast groups Add vlan_id to multicasts groups so that we know which vlan each group belongs to and can correctly forward to appropriate vlan. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 6d6f265..7d886b0 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -39,6 +39,8 @@ static inline int br_ip_equal(const struct br_ip *a, const struct br_ip *b) { if (a->proto != b->proto) return 0; + if (a->vid != b->vid) + return 0; switch (a->proto) { case htons(ETH_P_IP): return a->u.ip4 == b->u.ip4; @@ -50,16 +52,19 @@ static inline int br_ip_equal(const struct br_ip *a, const struct br_ip *b) return 0; } -static inline int __br_ip4_hash(struct net_bridge_mdb_htable *mdb, __be32 ip) +static inline int __br_ip4_hash(struct net_bridge_mdb_htable *mdb, __be32 ip, + __u16 vid) { - return jhash_1word(mdb->secret, (__force u32)ip) & (mdb->max - 1); + return jhash_2words((__force u32)ip, vid, mdb->secret) & (mdb->max - 1); } #if IS_ENABLED(CONFIG_IPV6) static inline int __br_ip6_hash(struct net_bridge_mdb_htable *mdb, - const struct in6_addr *ip) + const struct in6_addr *ip, + __u16 vid) { - return jhash2((__force u32 *)ip->s6_addr32, 4, mdb->secret) & (mdb->max - 1); + return jhash_2words(ipv6_addr_hash(ip), vid, + mdb->secret) & (mdb->max - 1); } #endif @@ -68,10 +73,10 @@ static inline int br_ip_hash(struct net_bridge_mdb_htable *mdb, { switch (ip->proto) { case htons(ETH_P_IP): - return __br_ip4_hash(mdb, ip->u.ip4); + return __br_ip4_hash(mdb, ip->u.ip4, ip->vid); #if IS_ENABLED(CONFIG_IPV6) case htons(ETH_P_IPV6): - return __br_ip6_hash(mdb, &ip->u.ip6); + return __br_ip6_hash(mdb, &ip->u.ip6, ip->vid); #endif } return 0; @@ -101,24 +106,27 @@ struct net_bridge_mdb_entry *br_mdb_ip_get(struct net_bridge_mdb_htable *mdb, } static struct net_bridge_mdb_entry *br_mdb_ip4_get( - struct net_bridge_mdb_htable *mdb, __be32 dst) + struct net_bridge_mdb_htable *mdb, __be32 dst, __u16 vid) { struct br_ip br_dst; br_dst.u.ip4 = dst; br_dst.proto = htons(ETH_P_IP); + br_dst.vid = vid; return br_mdb_ip_get(mdb, &br_dst); } #if IS_ENABLED(CONFIG_IPV6) static struct net_bridge_mdb_entry *br_mdb_ip6_get( - struct net_bridge_mdb_htable *mdb, const struct in6_addr *dst) + struct net_bridge_mdb_htable *mdb, const struct in6_addr *dst, + __u16 vid) { struct br_ip br_dst; br_dst.u.ip6 = *dst; br_dst.proto = htons(ETH_P_IPV6); + br_dst.vid = vid; return br_mdb_ip_get(mdb, &br_dst); } @@ -694,7 +702,8 @@ err: static int br_ip4_multicast_add_group(struct net_bridge *br, struct net_bridge_port *port, - __be32 group) + __be32 group, + __u16 vid) { struct br_ip br_group; @@ -703,6 +712,7 @@ static int br_ip4_multicast_add_group(struct net_bridge *br, br_group.u.ip4 = group; br_group.proto = htons(ETH_P_IP); + br_group.vid = vid; return br_multicast_add_group(br, port, &br_group); } @@ -710,7 +720,8 @@ static int br_ip4_multicast_add_group(struct net_bridge *br, #if IS_ENABLED(CONFIG_IPV6) static int br_ip6_multicast_add_group(struct net_bridge *br, struct net_bridge_port *port, - const struct in6_addr *group) + const struct in6_addr *group, + __u16 vid) { struct br_ip br_group; @@ -719,6 +730,7 @@ static int br_ip6_multicast_add_group(struct net_bridge *br, br_group.u.ip6 = *group; br_group.proto = htons(ETH_P_IPV6); + br_group.vid = vid; return br_multicast_add_group(br, port, &br_group); } @@ -895,10 +907,12 @@ static int br_ip4_multicast_igmp3_report(struct net_bridge *br, int type; int err = 0; __be32 group; + u16 vid = 0; if (!pskb_may_pull(skb, sizeof(*ih))) return -EINVAL; + br_vlan_get_tag(skb, &vid); ih = igmpv3_report_hdr(skb); num = ntohs(ih->ngrec); len = sizeof(*ih); @@ -930,7 +944,7 @@ static int br_ip4_multicast_igmp3_report(struct net_bridge *br, continue; } - err = br_ip4_multicast_add_group(br, port, group); + err = br_ip4_multicast_add_group(br, port, group, vid); if (err) break; } @@ -949,10 +963,12 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br, int len; int num; int err = 0; + u16 vid = 0; if (!pskb_may_pull(skb, sizeof(*icmp6h))) return -EINVAL; + br_vlan_get_tag(skb, &vid); icmp6h = icmp6_hdr(skb); num = ntohs(icmp6h->icmp6_dataun.un_data16[1]); len = sizeof(*icmp6h); @@ -990,7 +1006,8 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br, continue; } - err = br_ip6_multicast_add_group(br, port, &grec->grec_mca); + err = br_ip6_multicast_add_group(br, port, &grec->grec_mca, + vid); if (!err) break; } @@ -1074,6 +1091,7 @@ static int br_ip4_multicast_query(struct net_bridge *br, unsigned long now = jiffies; __be32 group; int err = 0; + u16 vid = 0; spin_lock(&br->multicast_lock); if (!netif_running(br->dev) || @@ -1108,7 +1126,8 @@ static int br_ip4_multicast_query(struct net_bridge *br, if (!group) goto out; - mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group); + br_vlan_get_tag(skb, &vid); + mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group, vid); if (!mp) goto out; @@ -1149,6 +1168,7 @@ static int br_ip6_multicast_query(struct net_bridge *br, unsigned long now = jiffies; const struct in6_addr *group = NULL; int err = 0; + u16 vid = 0; spin_lock(&br->multicast_lock); if (!netif_running(br->dev) || @@ -1180,7 +1200,8 @@ static int br_ip6_multicast_query(struct net_bridge *br, if (!group) goto out; - mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group); + br_vlan_get_tag(skb, &vid); + mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group, vid); if (!mp) goto out; @@ -1286,7 +1307,8 @@ out: static void br_ip4_multicast_leave_group(struct net_bridge *br, struct net_bridge_port *port, - __be32 group) + __be32 group, + __u16 vid) { struct br_ip br_group; @@ -1295,6 +1317,7 @@ static void br_ip4_multicast_leave_group(struct net_bridge *br, br_group.u.ip4 = group; br_group.proto = htons(ETH_P_IP); + br_group.vid = vid; br_multicast_leave_group(br, port, &br_group); } @@ -1302,7 +1325,8 @@ static void br_ip4_multicast_leave_group(struct net_bridge *br, #if IS_ENABLED(CONFIG_IPV6) static void br_ip6_multicast_leave_group(struct net_bridge *br, struct net_bridge_port *port, - const struct in6_addr *group) + const struct in6_addr *group, + __u16 vid) { struct br_ip br_group; @@ -1311,6 +1335,7 @@ static void br_ip6_multicast_leave_group(struct net_bridge *br, br_group.u.ip6 = *group; br_group.proto = htons(ETH_P_IPV6); + br_group.vid = vid; br_multicast_leave_group(br, port, &br_group); } @@ -1326,6 +1351,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, unsigned int len; unsigned int offset; int err; + u16 vid = 0; /* We treat OOM as packet loss for now. */ if (!pskb_may_pull(skb, sizeof(*iph))) @@ -1386,6 +1412,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, err = 0; + br_vlan_get_tag(skb2, &vid); BR_INPUT_SKB_CB(skb)->igmp = 1; ih = igmp_hdr(skb2); @@ -1393,7 +1420,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, case IGMP_HOST_MEMBERSHIP_REPORT: case IGMPV2_HOST_MEMBERSHIP_REPORT: BR_INPUT_SKB_CB(skb)->mrouters_only = 1; - err = br_ip4_multicast_add_group(br, port, ih->group); + err = br_ip4_multicast_add_group(br, port, ih->group, vid); break; case IGMPV3_HOST_MEMBERSHIP_REPORT: err = br_ip4_multicast_igmp3_report(br, port, skb2); @@ -1402,7 +1429,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, err = br_ip4_multicast_query(br, port, skb2); break; case IGMP_HOST_LEAVE_MESSAGE: - br_ip4_multicast_leave_group(br, port, ih->group); + br_ip4_multicast_leave_group(br, port, ih->group, vid); break; } @@ -1427,6 +1454,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, unsigned int len; int offset; int err; + u16 vid = 0; if (!pskb_may_pull(skb, sizeof(*ip6h))) return -EINVAL; @@ -1510,6 +1538,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, err = 0; + br_vlan_get_tag(skb, &vid); BR_INPUT_SKB_CB(skb)->igmp = 1; switch (icmp6_type) { @@ -1522,7 +1551,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, } mld = (struct mld_msg *)skb_transport_header(skb2); BR_INPUT_SKB_CB(skb)->mrouters_only = 1; - err = br_ip6_multicast_add_group(br, port, &mld->mld_mca); + err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid); break; } case ICMPV6_MLD2_REPORT: @@ -1539,7 +1568,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, goto out; } mld = (struct mld_msg *)skb_transport_header(skb2); - br_ip6_multicast_leave_group(br, port, &mld->mld_mca); + br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid); } } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index f4ae87b..22915c8 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -63,6 +63,7 @@ struct br_ip #endif } u; __be16 proto; + __u16 vid; }; struct net_port_vlans { -- cgit v0.10.2 From 1690be63a27b20ae65c792729a44f5970561ffa4 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:18 +0000 Subject: bridge: Add vlan support to static neighbors When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: Vlad Yasevich Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 4e2aa47..1c0efcb 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7002,7 +7002,7 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return err; } -static int ixgbe_ndo_fdb_del(struct ndmsg *ndm, +static int ixgbe_ndo_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, const unsigned char *addr) { diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 937bcc3..5088dc5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1959,6 +1959,7 @@ static int mlx4_en_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], } static int mlx4_en_fdb_del(struct ndmsg *ndm, + struct nlattr *tb[], struct net_device *dev, const unsigned char *addr) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index b745194..b953168 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -247,8 +247,8 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p) return 0; } -static int qlcnic_fdb_del(struct ndmsg *ndm, struct net_device *netdev, - const unsigned char *addr) +static int qlcnic_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *netdev, const unsigned char *addr) { struct qlcnic_adapter *adapter = netdev_priv(netdev); int err = -EOPNOTSUPP; diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index e4b8078..defcd8a8 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -599,7 +599,7 @@ static int macvlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return err; } -static int macvlan_fdb_del(struct ndmsg *ndm, +static int macvlan_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, const unsigned char *addr) { diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 72485b9..9d70421 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -393,7 +393,8 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], } /* Delete entry (via netlink) */ -static int vxlan_fdb_delete(struct ndmsg *ndm, struct net_device *dev, +static int vxlan_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *dev, const unsigned char *addr) { struct vxlan_dev *vxlan = netdev_priv(dev); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 1964ca6..9deb672 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -884,7 +884,8 @@ struct netdev_fcoe_hbainfo { * struct net_device *dev, * const unsigned char *addr, u16 flags) * Adds an FDB entry to dev for addr. - * int (*ndo_fdb_del)(struct ndmsg *ndm, struct net_device *dev, + * int (*ndo_fdb_del)(struct ndmsg *ndm, struct nlattr *tb[], + * struct net_device *dev, * const unsigned char *addr) * Deletes the FDB entry from dev coresponding to addr. * int (*ndo_fdb_dump)(struct sk_buff *skb, struct netlink_callback *cb, @@ -1008,6 +1009,7 @@ struct net_device_ops { const unsigned char *addr, u16 flags); int (*ndo_fdb_del)(struct ndmsg *ndm, + struct nlattr *tb[], struct net_device *dev, const unsigned char *addr); int (*ndo_fdb_dump)(struct sk_buff *skb, diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index 275e5d6..adb068c 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -20,6 +20,7 @@ enum { NDA_LLADDR, NDA_CACHEINFO, NDA_PROBES, + NDA_VLAN, __NDA_MAX }; diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index 276a522..4b75ad4 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -505,6 +505,10 @@ static int fdb_fill_info(struct sk_buff *skb, const struct net_bridge *br, ci.ndm_refcnt = 0; if (nla_put(skb, NDA_CACHEINFO, sizeof(ci), &ci)) goto nla_put_failure; + + if (nla_put(skb, NDA_VLAN, sizeof(u16), &fdb->vlan_id)) + goto nla_put_failure; + return nlmsg_end(skb, nlh); nla_put_failure: @@ -516,6 +520,7 @@ static inline size_t fdb_nlmsg_size(void) { return NLMSG_ALIGN(sizeof(struct ndmsg)) + nla_total_size(ETH_ALEN) /* NDA_LLADDR */ + + nla_total_size(sizeof(u16)) /* NDA_VLAN */ + nla_total_size(sizeof(struct nda_cacheinfo)); } @@ -617,6 +622,25 @@ static int fdb_add_entry(struct net_bridge_port *source, const __u8 *addr, return 0; } +static int __br_fdb_add(struct ndmsg *ndm, struct net_bridge_port *p, + const unsigned char *addr, u16 nlh_flags, u16 vid) +{ + int err = 0; + + if (ndm->ndm_flags & NTF_USE) { + rcu_read_lock(); + br_fdb_update(p->br, p, addr, vid); + rcu_read_unlock(); + } else { + spin_lock_bh(&p->br->hash_lock); + err = fdb_add_entry(p, addr, ndm->ndm_state, + nlh_flags, vid); + spin_unlock_bh(&p->br->hash_lock); + } + + return err; +} + /* Add new permanent fdb entry with RTM_NEWNEIGH */ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, @@ -624,12 +648,29 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], { struct net_bridge_port *p; int err = 0; + struct net_port_vlans *pv; + unsigned short vid = VLAN_N_VID; if (!(ndm->ndm_state & (NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE))) { pr_info("bridge: RTM_NEWNEIGH with invalid state %#x\n", ndm->ndm_state); return -EINVAL; } + if (tb[NDA_VLAN]) { + if (nla_len(tb[NDA_VLAN]) != sizeof(unsigned short)) { + pr_info("bridge: RTM_NEWNEIGH with invalid vlan\n"); + return -EINVAL; + } + + vid = nla_get_u16(tb[NDA_VLAN]); + + if (vid >= VLAN_N_VID) { + pr_info("bridge: RTM_NEWNEIGH with invalid vlan id %d\n", + vid); + return -EINVAL; + } + } + p = br_port_get_rtnl(dev); if (p == NULL) { pr_info("bridge: RTM_NEWNEIGH %s not a bridge port\n", @@ -637,41 +678,90 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return -EINVAL; } - if (ndm->ndm_flags & NTF_USE) { - rcu_read_lock(); - br_fdb_update(p->br, p, addr, 0); - rcu_read_unlock(); + pv = nbp_get_vlan_info(p); + if (vid != VLAN_N_VID) { + if (!pv || !test_bit(vid, pv->vlan_bitmap)) { + pr_info("bridge: RTM_NEWNEIGH with unconfigured " + "vlan %d on port %s\n", vid, dev->name); + return -EINVAL; + } + + /* VID was specified, so use it. */ + err = __br_fdb_add(ndm, p, addr, nlh_flags, vid); } else { - spin_lock_bh(&p->br->hash_lock); - err = fdb_add_entry(p, addr, ndm->ndm_state, nlh_flags, - 0); - spin_unlock_bh(&p->br->hash_lock); + if (!pv || bitmap_empty(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN)) { + err = __br_fdb_add(ndm, p, addr, nlh_flags, 0); + goto out; + } + + /* We have vlans configured on this port and user didn't + * specify a VLAN. To be nice, add/update entry for every + * vlan on this port. + */ + vid = find_first_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN); + while (vid < BR_VLAN_BITMAP_LEN) { + err = __br_fdb_add(ndm, p, addr, nlh_flags, vid); + if (err) + goto out; + vid = find_next_bit(pv->vlan_bitmap, + BR_VLAN_BITMAP_LEN, vid+1); + } } +out: return err; } -static int fdb_delete_by_addr(struct net_bridge_port *p, const u8 *addr) +static int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, + u16 vlan) { - struct net_bridge *br = p->br; - struct hlist_head *head = &br->hash[br_mac_hash(addr, 0)]; + struct hlist_head *head = &br->hash[br_mac_hash(addr, vlan)]; struct net_bridge_fdb_entry *fdb; - fdb = fdb_find(head, addr, 0); + fdb = fdb_find(head, addr, vlan); if (!fdb) return -ENOENT; - fdb_delete(p->br, fdb); + fdb_delete(br, fdb); return 0; } +static int __br_fdb_delete(struct net_bridge_port *p, + const unsigned char *addr, u16 vid) +{ + int err; + + spin_lock_bh(&p->br->hash_lock); + err = fdb_delete_by_addr(p->br, addr, vid); + spin_unlock_bh(&p->br->hash_lock); + + return err; +} + /* Remove neighbor entry with RTM_DELNEIGH */ -int br_fdb_delete(struct ndmsg *ndm, struct net_device *dev, +int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *dev, const unsigned char *addr) { struct net_bridge_port *p; int err; + struct net_port_vlans *pv; + unsigned short vid = VLAN_N_VID; + if (tb[NDA_VLAN]) { + if (nla_len(tb[NDA_VLAN]) != sizeof(unsigned short)) { + pr_info("bridge: RTM_NEWNEIGH with invalid vlan\n"); + return -EINVAL; + } + + vid = nla_get_u16(tb[NDA_VLAN]); + + if (vid >= VLAN_N_VID) { + pr_info("bridge: RTM_NEWNEIGH with invalid vlan id %d\n", + vid); + return -EINVAL; + } + } p = br_port_get_rtnl(dev); if (p == NULL) { pr_info("bridge: RTM_DELNEIGH %s not a bridge port\n", @@ -679,9 +769,33 @@ int br_fdb_delete(struct ndmsg *ndm, struct net_device *dev, return -EINVAL; } - spin_lock_bh(&p->br->hash_lock); - err = fdb_delete_by_addr(p, addr); - spin_unlock_bh(&p->br->hash_lock); + pv = nbp_get_vlan_info(p); + if (vid != VLAN_N_VID) { + if (!pv || !test_bit(vid, pv->vlan_bitmap)) { + pr_info("bridge: RTM_DELNEIGH with unconfigured " + "vlan %d on port %s\n", vid, dev->name); + return -EINVAL; + } + err = __br_fdb_delete(p, addr, vid); + } else { + if (!pv || bitmap_empty(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN)) { + err = __br_fdb_delete(p, addr, 0); + goto out; + } + + /* We have vlans configured on this port and user didn't + * specify a VLAN. To be nice, add/update entry for every + * vlan on this port. + */ + err = -ENOENT; + vid = find_first_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN); + while (vid < BR_VLAN_BITMAP_LEN) { + err &= __br_fdb_delete(p, addr, vid); + vid = find_next_bit(pv->vlan_bitmap, + BR_VLAN_BITMAP_LEN, vid+1); + } + } +out: return err; } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 22915c8..799dbb3 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -388,7 +388,7 @@ extern void br_fdb_update(struct net_bridge *br, const unsigned char *addr, u16 vid); -extern int br_fdb_delete(struct ndmsg *ndm, +extern int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, const unsigned char *addr); extern int br_fdb_add(struct ndmsg *nlh, struct nlattr *tb[], @@ -577,13 +577,13 @@ extern void nbp_vlan_flush(struct net_bridge_port *port); static inline struct net_port_vlans *br_get_vlan_info( const struct net_bridge *br) { - return rcu_dereference(br->vlan_info); + return rcu_dereference_rtnl(br->vlan_info); } static inline struct net_port_vlans *nbp_get_vlan_info( const struct net_bridge_port *p) { - return rcu_dereference(p->vlan_info); + return rcu_dereference_rtnl(p->vlan_info); } /* Since bridge now depends on 8021Q module, but the time bridge sees the diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index f3a112e..d8aa20f 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2119,13 +2119,17 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) { struct net *net = sock_net(skb->sk); struct ndmsg *ndm; - struct nlattr *llattr; + struct nlattr *tb[NDA_MAX+1]; struct net_device *dev; int err = -EINVAL; __u8 *addr; - if (nlmsg_len(nlh) < sizeof(*ndm)) - return -EINVAL; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + err = nlmsg_parse(nlh, sizeof(*ndm), tb, NDA_MAX, NULL); + if (err < 0) + return err; ndm = nlmsg_data(nlh); if (ndm->ndm_ifindex == 0) { @@ -2139,13 +2143,17 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) return -ENODEV; } - llattr = nlmsg_find_attr(nlh, sizeof(*ndm), NDA_LLADDR); - if (llattr == NULL || nla_len(llattr) != ETH_ALEN) { - pr_info("PF_BRIGDE: RTM_DELNEIGH with invalid address\n"); + if (!tb[NDA_LLADDR] || nla_len(tb[NDA_LLADDR]) != ETH_ALEN) { + pr_info("PF_BRIDGE: RTM_DELNEIGH with invalid address\n"); + return -EINVAL; + } + + addr = nla_data(tb[NDA_LLADDR]); + if (!is_valid_ether_addr(addr)) { + pr_info("PF_BRIDGE: RTM_DELNEIGH with invalid ether address\n"); return -EINVAL; } - addr = nla_data(llattr); err = -EOPNOTSUPP; /* Support fdb on master device the net/bridge default case */ @@ -2155,7 +2163,7 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) const struct net_device_ops *ops = br_dev->netdev_ops; if (ops->ndo_fdb_del) - err = ops->ndo_fdb_del(ndm, dev, addr); + err = ops->ndo_fdb_del(ndm, tb, dev, addr); if (err) goto out; @@ -2165,7 +2173,7 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) /* Embedded bridge, macvlan, and any other device support */ if ((ndm->ndm_flags & NTF_SELF) && dev->netdev_ops->ndo_fdb_del) { - err = dev->netdev_ops->ndo_fdb_del(ndm, dev, addr); + err = dev->netdev_ops->ndo_fdb_del(ndm, tb, dev, addr); if (!err) { rtnl_fdb_notify(dev, addr, RTM_DELNEIGH); -- cgit v0.10.2 From bc9a25d21ef8bad30e259af5114ccfb845c066db Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:19 +0000 Subject: bridge: Add vlan support for local fdb entries When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index 4b75ad4..8117900 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -28,7 +28,7 @@ static struct kmem_cache *br_fdb_cache __read_mostly; static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source, - const unsigned char *addr); + const unsigned char *addr, u16 vid); static void fdb_notify(struct net_bridge *br, const struct net_bridge_fdb_entry *, int); @@ -92,6 +92,7 @@ static void fdb_delete(struct net_bridge *br, struct net_bridge_fdb_entry *f) void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr) { struct net_bridge *br = p->br; + bool no_vlan = (nbp_get_vlan_info(p) == NULL) ? true : false; int i; spin_lock_bh(&br->hash_lock); @@ -106,10 +107,12 @@ void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr) if (f->dst == p && f->is_local) { /* maybe another port has same hw addr? */ struct net_bridge_port *op; + u16 vid = f->vlan_id; list_for_each_entry(op, &br->port_list, list) { if (op != p && ether_addr_equal(op->dev->dev_addr, - f->addr.addr)) { + f->addr.addr) && + nbp_vlan_find(op, vid)) { f->dst = op; goto insert; } @@ -117,27 +120,55 @@ void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr) /* delete old one */ fdb_delete(br, f); - goto insert; +insert: + /* insert new address, may fail if invalid + * address or dup. + */ + fdb_insert(br, p, newaddr, vid); + + /* if this port has no vlan information + * configured, we can safely be done at + * this point. + */ + if (no_vlan) + goto done; } } } - insert: - /* insert new address, may fail if invalid address or dup. */ - fdb_insert(br, p, newaddr); +done: spin_unlock_bh(&br->hash_lock); } void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr) { struct net_bridge_fdb_entry *f; + struct net_port_vlans *pv; + u16 vid = 0; /* If old entry was unassociated with any port, then delete it. */ f = __br_fdb_get(br, br->dev->dev_addr, 0); if (f && f->is_local && !f->dst) fdb_delete(br, f); - fdb_insert(br, NULL, newaddr); + fdb_insert(br, NULL, newaddr, 0); + + /* Now remove and add entries for every VLAN configured on the + * bridge. This function runs under RTNL so the bitmap will not + * change from under us. + */ + pv = br_get_vlan_info(br); + if (!pv) + return; + + for (vid = find_next_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN, vid); + vid < BR_VLAN_BITMAP_LEN; + vid = find_next_bit(pv->vlan_bitmap, BR_VLAN_BITMAP_LEN, vid+1)) { + f = __br_fdb_get(br, br->dev->dev_addr, vid); + if (f && f->is_local && !f->dst) + fdb_delete(br, f); + fdb_insert(br, NULL, newaddr, vid); + } } void br_fdb_cleanup(unsigned long _data) @@ -379,15 +410,15 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head, } static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source, - const unsigned char *addr) + const unsigned char *addr, u16 vid) { - struct hlist_head *head = &br->hash[br_mac_hash(addr, 0)]; + struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)]; struct net_bridge_fdb_entry *fdb; if (!is_valid_ether_addr(addr)) return -EINVAL; - fdb = fdb_find(head, addr, 0); + fdb = fdb_find(head, addr, vid); if (fdb) { /* it is okay to have multiple ports with same * address, just use the first one. @@ -400,7 +431,7 @@ static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source, fdb_delete(br, fdb); } - fdb = fdb_create(head, source, addr, 0); + fdb = fdb_create(head, source, addr, vid); if (!fdb) return -ENOMEM; @@ -411,12 +442,12 @@ static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source, /* Add entry for local address of interface */ int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source, - const unsigned char *addr) + const unsigned char *addr, u16 vid) { int ret; spin_lock_bh(&br->hash_lock); - ret = fdb_insert(br, source, addr); + ret = fdb_insert(br, source, addr, vid); spin_unlock_bh(&br->hash_lock); return ret; } @@ -712,8 +743,8 @@ out: return err; } -static int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, - u16 vlan) +int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, + u16 vlan) { struct hlist_head *head = &br->hash[br_mac_hash(addr, vlan)]; struct net_bridge_fdb_entry *fdb; diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 335c60c..ef1b914 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -397,7 +397,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) dev_set_mtu(br->dev, br_min_mtu(br)); - if (br_fdb_insert(br, p, dev->dev_addr)) + if (br_fdb_insert(br, p, dev->dev_addr, 0)) netdev_err(dev, "failed insert local address bridge forwarding table\n"); kobject_uevent(&p->kobj, KOBJ_ADD); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 799dbb3..32ecfa4 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -382,11 +382,13 @@ extern int br_fdb_fillbuf(struct net_bridge *br, void *buf, unsigned long count, unsigned long off); extern int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source, - const unsigned char *addr); + const unsigned char *addr, + u16 vid); extern void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source, const unsigned char *addr, u16 vid); +extern int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vid); extern int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, @@ -573,6 +575,7 @@ extern int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val); extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags); extern int nbp_vlan_delete(struct net_bridge_port *port, u16 vid); extern void nbp_vlan_flush(struct net_bridge_port *port); +extern bool nbp_vlan_find(struct net_bridge_port *port, u16 vid); static inline struct net_port_vlans *br_get_vlan_info( const struct net_bridge *br) @@ -676,6 +679,11 @@ static inline struct net_port_vlans *nbp_get_vlan_info( return NULL; } +static inline bool nbp_vlan_find(struct net_bridge_port *port, u16 vid) +{ + return false; +} + static inline u16 br_vlan_get_tag(const struct sk_buff *skb, u16 *tag) { return 0; diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index c79940c..9ea358f 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -25,6 +25,9 @@ static void __vlan_delete_pvid(struct net_port_vlans *v, u16 vid) static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) { + struct net_bridge_port *p = NULL; + struct net_bridge *br; + struct net_device *dev; int err; if (test_bit(vid, v->vlan_bitmap)) { @@ -33,19 +36,35 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) return 0; } - if (v->port_idx && vid) { - struct net_device *dev = v->parent.port->dev; + if (vid) { + if (v->port_idx) { + p = v->parent.port; + br = p->br; + dev = p->dev; + } else { + br = v->parent.br; + dev = br->dev; + } - /* Add VLAN to the device filter if it is supported. - * Stricly speaking, this is not necessary now, since devices - * are made promiscuous by the bridge, but if that ever changes - * this code will allow tagged traffic to enter the bridge. - */ - if (dev->features & NETIF_F_HW_VLAN_FILTER) { + if (p && (dev->features & NETIF_F_HW_VLAN_FILTER)) { + /* Add VLAN to the device filter if it is supported. + * Stricly speaking, this is not necessary now, since + * devices are made promiscuous by the bridge, but if + * that ever changes this code will allow tagged + * traffic to enter the bridge. + */ err = dev->netdev_ops->ndo_vlan_rx_add_vid(dev, vid); if (err) return err; } + + err = br_fdb_insert(br, p, dev->dev_addr, vid); + if (err) { + br_err(br, "failed insert local address into bridge " + "forwarding table\n"); + goto out_filt; + } + } set_bit(vid, v->vlan_bitmap); @@ -54,6 +73,11 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) __vlan_add_pvid(v, vid); return 0; + +out_filt: + if (p && (dev->features & NETIF_F_HW_VLAN_FILTER)) + dev->netdev_ops->ndo_vlan_rx_kill_vid(dev, vid); + return err; } static int __vlan_del(struct net_port_vlans *v, u16 vid) @@ -253,6 +277,15 @@ int br_vlan_delete(struct net_bridge *br, u16 vid) if (!pv) return -EINVAL; + if (vid) { + /* If the VID !=0 remove fdb for this vid. VID 0 is special + * in that it's the default and is always there in the fdb. + */ + spin_lock_bh(&br->hash_lock); + fdb_delete_by_addr(br, br->dev->dev_addr, vid); + spin_unlock_bh(&br->hash_lock); + } + __vlan_del(pv, vid); return 0; } @@ -329,6 +362,15 @@ int nbp_vlan_delete(struct net_bridge_port *port, u16 vid) if (!pv) return -EINVAL; + if (vid) { + /* If the VID !=0 remove fdb for this vid. VID 0 is special + * in that it's the default and is always there in the fdb. + */ + spin_lock_bh(&port->br->hash_lock); + fdb_delete_by_addr(port->br, port->dev->dev_addr, vid); + spin_unlock_bh(&port->br->hash_lock); + } + return __vlan_del(pv, vid); } @@ -344,3 +386,22 @@ void nbp_vlan_flush(struct net_bridge_port *port) __vlan_flush(pv); } + +bool nbp_vlan_find(struct net_bridge_port *port, u16 vid) +{ + struct net_port_vlans *pv; + bool found = false; + + rcu_read_lock(); + pv = rcu_dereference(port->vlan_info); + + if (!pv) + goto out; + + if (test_bit(vid, pv->vlan_bitmap)) + found = true; + +out: + rcu_read_unlock(); + return found; +} -- cgit v0.10.2 From 35e03f3a0275a1ba57e432d7c948cf6f70fbb37a Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 13 Feb 2013 12:00:20 +0000 Subject: bridge: Separate egress policy bitmap Add an ability to configure a separate "untagged" egress policy to the VLAN information of the bridge. This superseeds PVID policy and makes PVID ingress-only. The policy is configured with a new flag and is represented as a port bitmap per vlan. Egress frames with a VLAN id in "untagged" policy bitmap would egress the port without VLAN header. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index c6c30e2..f1bf8d3 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -121,6 +121,7 @@ enum { #define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ #define BRIDGE_VLAN_INFO_PVID (1<<1) /* VLAN is PVID, ingress untagged */ +#define BRIDGE_VLAN_INFO_UNTAGGED (1<<2) /* VLAN egresses untagged */ struct bridge_vlan_info { u16 flags; diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index e044cc0..d1dda47 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -143,6 +143,10 @@ static int br_fill_ifinfo(struct sk_buff *skb, vinfo.flags = 0; if (vid == pvid) vinfo.flags |= BRIDGE_VLAN_INFO_PVID; + + if (test_bit(vid, pv->untagged_bitmap)) + vinfo.flags |= BRIDGE_VLAN_INFO_UNTAGGED; + if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO, sizeof(vinfo), &vinfo)) goto nla_put_failure; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 32ecfa4..6d314c4 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -75,6 +75,7 @@ struct net_port_vlans { } parent; struct rcu_head rcu; unsigned long vlan_bitmap[BR_VLAN_BITMAP_LEN]; + unsigned long untagged_bitmap[BR_VLAN_BITMAP_LEN]; u16 num_vlans; }; diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 9ea358f..93dde75 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -23,6 +23,15 @@ static void __vlan_delete_pvid(struct net_port_vlans *v, u16 vid) v->pvid = 0; } +static void __vlan_add_flags(struct net_port_vlans *v, u16 vid, u16 flags) +{ + if (flags & BRIDGE_VLAN_INFO_PVID) + __vlan_add_pvid(v, vid); + + if (flags & BRIDGE_VLAN_INFO_UNTAGGED) + set_bit(vid, v->untagged_bitmap); +} + static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) { struct net_bridge_port *p = NULL; @@ -31,8 +40,7 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) int err; if (test_bit(vid, v->vlan_bitmap)) { - if (flags & BRIDGE_VLAN_INFO_PVID) - __vlan_add_pvid(v, vid); + __vlan_add_flags(v, vid, flags); return 0; } @@ -69,8 +77,7 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) set_bit(vid, v->vlan_bitmap); v->num_vlans++; - if (flags & BRIDGE_VLAN_INFO_PVID) - __vlan_add_pvid(v, vid); + __vlan_add_flags(v, vid, flags); return 0; @@ -86,6 +93,7 @@ static int __vlan_del(struct net_port_vlans *v, u16 vid) return -EINVAL; __vlan_delete_pvid(v, vid); + clear_bit(vid, v->untagged_bitmap); if (v->port_idx && vid) { struct net_device *dev = v->parent.port->dev; @@ -144,11 +152,11 @@ struct sk_buff *br_handle_vlan(struct net_bridge *br, goto out; /* At this point, we know that the frame was filtered and contains - * a valid vlan id. If the vlan id matches the pvid of current port + * a valid vlan id. If the vlan id is set in the untagged bitmap, * send untagged; otherwise, send taged. */ br_vlan_get_tag(skb, &vid); - if (vid == br_get_pvid(pv)) + if (test_bit(vid, pv->untagged_bitmap)) skb = br_vlan_untag(skb); else { /* Egress policy says "send tagged". If output device -- cgit v0.10.2 From 9f89ec82521957de807dc0d56264ee226bbe9b98 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 14 Feb 2013 13:32:31 +0800 Subject: bridge: use __u16 in if_bridge.h We should use "__u16" instead of "u16" in the user-space visable header. Cc: Vlad Yasevich Cc: Stephen Hemminger Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index f1bf8d3..2d70d79 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -124,8 +124,8 @@ enum { #define BRIDGE_VLAN_INFO_UNTAGGED (1<<2) /* VLAN egresses untagged */ struct bridge_vlan_info { - u16 flags; - u16 vid; + __u16 flags; + __u16 vid; }; /* Bridge multicast database attributes -- cgit v0.10.2 From f350ca03703133c94fe742f6fa6ff0fd8f5a9a09 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 13 Feb 2013 12:09:52 +0000 Subject: net: cdc_ncm: fix probing of devices with multiple control interface altsettings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") added a test for a CDC MBIM altsetting, implementing the cdc_ncm part of MBIM backward compatibility support. This intentionally made the driver behave differently for CDC NCM devices with 2 alternate settings for the Communication interface, depending on whether or not CONFIG_USB_NET_CDC_MBIM was enabled. This is correct iff alternate setting #1 really *is* a MBIM setting. If not, then NCM probing will use a different altsetting than before, possibly causing probing failures depending on CONFIG_USB_NET_CDC_MBIM. Fix by setting the altsetting back to default after the test, restoring the previous behaviour for non MBIM devices. This bug causes probing of Huawei E3276 devices to fail when the MBIM driver is enabled, because these devices have a second alternate setting with no CDC functional descriptors. Cc: Greg Suarez Cc: Alexey Orishko Reported-and-tested-by: Jonathan A. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 00d3b2d..6d25439 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -576,9 +576,14 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) if ((intf->num_altsetting == 2) && !usb_set_interface(dev->udev, intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_MBIM) && - cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) - return -ENODEV; + CDC_NCM_COMM_ALTSETTING_MBIM)) { + if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) + return -ENODEV; + else + usb_set_interface(dev->udev, + intf->cur_altsetting->desc.bInterfaceNumber, + CDC_NCM_COMM_ALTSETTING_NCM); + } #endif /* NCM data altsetting is always 1 */ -- cgit v0.10.2 From 35876b5ffc154c357476b2c3bdab10feaf4bd8f0 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 14 Feb 2013 03:18:57 +0000 Subject: xen-netback: correctly return errors from netbk_count_requests() netbk_count_requests() could detect an error, call netbk_fatal_tx_error() but return 0. The vif may then be used afterwards (e.g., in a call to netbk_tx_error(). Since netbk_fatal_tx_error() could set vif->refcnt to 1, the vif may be freed immediately after the call to netbk_fatal_tx_error() (e.g., if the vif is also removed). Netback thread Xenwatch thread ------------------------------------------- netbk_fatal_tx_err() netback_remove() xenvif_disconnect() ... free_netdev() netbk_tx_err() Oops! Signed-off-by: Wei Liu Signed-off-by: Jan Beulich Signed-off-by: David Vrabel Reported-by: Christopher S. Aker Acked-by: Ian Campbell Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 2b9520c..cd49ba9 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -911,13 +911,13 @@ static int netbk_count_requests(struct xenvif *vif, if (frags >= work_to_do) { netdev_err(vif->dev, "Need more frags\n"); netbk_fatal_tx_err(vif); - return -frags; + return -ENODATA; } if (unlikely(frags >= MAX_SKB_FRAGS)) { netdev_err(vif->dev, "Too many frags\n"); netbk_fatal_tx_err(vif); - return -frags; + return -E2BIG; } memcpy(txp, RING_GET_REQUEST(&vif->tx, cons + frags), @@ -925,7 +925,7 @@ static int netbk_count_requests(struct xenvif *vif, if (txp->size > first->size) { netdev_err(vif->dev, "Frag is bigger than frame.\n"); netbk_fatal_tx_err(vif); - return -frags; + return -EIO; } first->size -= txp->size; @@ -935,7 +935,7 @@ static int netbk_count_requests(struct xenvif *vif, netdev_err(vif->dev, "txp->offset: %x, size: %u\n", txp->offset, txp->size); netbk_fatal_tx_err(vif); - return -frags; + return -EINVAL; } } while ((txp++)->flags & XEN_NETTXF_more_data); return frags; -- cgit v0.10.2 From 3e55f8b306cf305832a4ac78aa82e1b40e818ece Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 14 Feb 2013 03:18:58 +0000 Subject: xen-netback: cancel the credit timer when taking the vif down If the credit timer is left armed after calling xen_netbk_remove_xenvif(), then it may fire and attempt to schedule the vif which will then oops as vif->netbk == NULL. This may happen both in the fatal error path and during normal disconnection from the front end. The sequencing during shutdown is critical to ensure that: a) vif->netbk doesn't become unexpectedly NULL; and b) the net device/vif is not freed. 1. Mark as unschedulable (netif_carrier_off()). 2. Synchronously cancel the timer. 3. Remove the vif from the schedule list. 4. Remove it from it netback thread group. 5. Wait for vif->refcnt to become 0. Signed-off-by: David Vrabel Acked-by: Ian Campbell Reported-by: Christopher S. Aker Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index b8c5193..221f426 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -132,6 +132,7 @@ static void xenvif_up(struct xenvif *vif) static void xenvif_down(struct xenvif *vif) { disable_irq(vif->irq); + del_timer_sync(&vif->credit_timeout); xen_netbk_deschedule_xenvif(vif); xen_netbk_remove_xenvif(vif); } @@ -363,8 +364,6 @@ void xenvif_disconnect(struct xenvif *vif) atomic_dec(&vif->refcnt); wait_event(vif->waiting_to_free, atomic_read(&vif->refcnt) == 0); - del_timer_sync(&vif->credit_timeout); - if (vif->irq) unbind_from_irqhandler(vif->irq, vif); -- cgit v0.10.2 From 4160815ffcaed68a976ba3cfe0131da3ae2b2615 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Wed, 13 Feb 2013 19:14:10 +0000 Subject: bgmac: add read of interrupt mask after disabling interrupts The specs prescribe an immediate read of the interrupt mask after disabling interrupts. This patch updates the driver to match the specs. Signed-off-by: Nathan Hintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 52d9a54..d341090 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -974,6 +974,7 @@ static void bgmac_chip_intrs_on(struct bgmac *bgmac) static void bgmac_chip_intrs_off(struct bgmac *bgmac) { bgmac_write(bgmac, BGMAC_INT_MASK, 0); + bgmac_read(bgmac, BGMAC_INT_MASK); } /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ -- cgit v0.10.2 From 462738f4f04febe16bf366925559c267130c88f0 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 13 Feb 2013 17:30:39 +0000 Subject: ARM: net: bpf_jit: fix emit_swap16() for non ARMv6+. The original code was generating an lsl instructions using the value of ARM_R8 (skb_headlen, possibly uninitialized if no skb_headlen access was required) as a shift amount. Signed-off-by: Nicolas Schichan Acked-by: Mircea Gherzan Acked-by: Russell King Signed-off-by: David S. Miller diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index a34f1e2..6828ef6 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -341,10 +341,17 @@ static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx) static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx) { - emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx); - emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx); - emit(ARM_LSL_I(r_dst, r_dst, 8), ctx); - emit(ARM_LSL_R(r_dst, r_dst, 8), ctx); + /* r_dst = (r_src << 8) | (r_src >> 8) */ + emit(ARM_LSL_I(ARM_R1, r_src, 8), ctx); + emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSR, 8), ctx); + + /* + * we need to mask out the bits set in r_dst[23:16] due to + * the first shift instruction. + * + * note that 0x8ff is the encoded immediate 0x00ff0000. + */ + emit(ARM_BIC_I(r_dst, r_dst, 0x8ff), ctx); } #else /* ARMv6+ */ -- cgit v0.10.2 From 15004cab947314ac0f2fd47169de95ce48bafb15 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 13 Feb 2013 19:57:12 +0000 Subject: bridge: make ifla_br_policy and br_af_ops static They are only used within this file. Cc: Vlad Yasevich Cc: Stephen Hemminger Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index d1dda47..27aa3ee 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -217,7 +217,7 @@ out: return err; } -const struct nla_policy ifla_br_policy[IFLA_MAX+1] = { +static const struct nla_policy ifla_br_policy[IFLA_MAX+1] = { [IFLA_BRIDGE_FLAGS] = { .type = NLA_U16 }, [IFLA_BRIDGE_MODE] = { .type = NLA_U16 }, [IFLA_BRIDGE_VLAN_INFO] = { .type = NLA_BINARY, @@ -463,7 +463,7 @@ static size_t br_get_link_af_size(const struct net_device *dev) return pv->num_vlans * nla_total_size(sizeof(struct bridge_vlan_info)); } -struct rtnl_af_ops br_af_ops = { +static struct rtnl_af_ops br_af_ops = { .family = AF_BRIDGE, .get_link_af_size = br_get_link_af_size, }; -- cgit v0.10.2 From 41a2060976ca879a68108ffb181dc429d556adce Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:01 +0000 Subject: gianfar: Remove unused device_node ref in gfar_private Remove unused device node pointer. Remove duplicated SET_NETDEV_DEV(). Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index c82f677..2c6b569 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -663,7 +663,6 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) return -ENOMEM; priv = netdev_priv(dev); - priv->node = ofdev->dev.of_node; priv->ndev = dev; priv->num_tx_queues = num_tx_qs; @@ -1001,7 +1000,6 @@ static int gfar_probe(struct platform_device *ofdev) priv = netdev_priv(dev); priv->ndev = dev; priv->ofdev = ofdev; - priv->node = ofdev->dev.of_node; SET_NETDEV_DEV(dev, &ofdev->dev); spin_lock_init(&priv->bflock); @@ -1038,8 +1036,6 @@ static int gfar_probe(struct platform_device *ofdev) /* Set the dev->base_addr to the gfar reg region */ dev->base_addr = (unsigned long) regs; - SET_NETDEV_DEV(dev, &ofdev->dev); - /* Fill in the dev structure */ dev->watchdog_timeo = TX_TIMEOUT; dev->mtu = 1500; diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 78125f1..8b4de57 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -1060,7 +1060,6 @@ struct gfar_private { unsigned int total_tx_ring_size; unsigned int total_rx_ring_size; - struct device_node *node; struct net_device *ndev; struct platform_device *ofdev; enum gfar_errata errata; -- cgit v0.10.2 From 369ec162b30e34c29bef8ec5ce32c40d5697fd64 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:02 +0000 Subject: gianfar: Add device ref (dev) in gfar_private Use device pointer (dev) to simplify the code and to avoid double indirections, especially on the hot path. Basically, instead of accessing priv to get the ofdev reference and then accessing the ofdev structure to dereference the needed dev pointer, we will get the dev pointer directly from priv. The dev pointer is required on the hot path, see gfar_new_rxbdp or gfar_clean_rx_ring (or xmit), and this patch makes it available directly from priv's 1st cacheline. This change is reflected at asm level too, taking (the hot) gfar_new_rxbdp(): initial version - 18c0: 7c 7e 1b 78 mr r30,r3 18d0: 81 69 04 3c lwz r11,1084(r9) 18d8: 34 6b 00 10 addic. r3,r11,16 18dc: 41 82 00 08 beq- 18e4 patched version - 18d0: 80 69 04 38 lwz r3,1080(r9) 18d8: 2f 83 00 00 cmpwi cr7,r3,0 18dc: 41 9e 00 08 beq- cr7,18e4 Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 2c6b569..592d297 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -231,7 +231,7 @@ static int gfar_alloc_skb_resources(struct net_device *ndev) dma_addr_t addr; int i, j, k; struct gfar_private *priv = netdev_priv(ndev); - struct device *dev = &priv->ofdev->dev; + struct device *dev = priv->dev; struct gfar_priv_tx_q *tx_queue = NULL; struct gfar_priv_rx_q *rx_queue = NULL; @@ -1000,6 +1000,7 @@ static int gfar_probe(struct platform_device *ofdev) priv = netdev_priv(dev); priv->ndev = dev; priv->ofdev = ofdev; + priv->dev = &ofdev->dev; SET_NETDEV_DEV(dev, &ofdev->dev); spin_lock_init(&priv->bflock); @@ -1713,13 +1714,13 @@ static void free_skb_tx_queue(struct gfar_priv_tx_q *tx_queue) if (!tx_queue->tx_skbuff[i]) continue; - dma_unmap_single(&priv->ofdev->dev, txbdp->bufPtr, + dma_unmap_single(priv->dev, txbdp->bufPtr, txbdp->length, DMA_TO_DEVICE); txbdp->lstatus = 0; for (j = 0; j < skb_shinfo(tx_queue->tx_skbuff[i])->nr_frags; j++) { txbdp++; - dma_unmap_page(&priv->ofdev->dev, txbdp->bufPtr, + dma_unmap_page(priv->dev, txbdp->bufPtr, txbdp->length, DMA_TO_DEVICE); } txbdp++; @@ -1740,8 +1741,8 @@ static void free_skb_rx_queue(struct gfar_priv_rx_q *rx_queue) for (i = 0; i < rx_queue->rx_ring_size; i++) { if (rx_queue->rx_skbuff[i]) { - dma_unmap_single(&priv->ofdev->dev, - rxbdp->bufPtr, priv->rx_buffer_size, + dma_unmap_single(priv->dev, rxbdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); dev_kfree_skb_any(rx_queue->rx_skbuff[i]); rx_queue->rx_skbuff[i] = NULL; @@ -1780,7 +1781,7 @@ static void free_skb_resources(struct gfar_private *priv) free_skb_rx_queue(rx_queue); } - dma_free_coherent(&priv->ofdev->dev, + dma_free_coherent(priv->dev, sizeof(struct txbd8) * priv->total_tx_ring_size + sizeof(struct rxbd8) * priv->total_rx_ring_size, priv->tx_queue[0]->tx_bd_base, @@ -2160,7 +2161,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) if (i == nr_frags - 1) lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT); - bufaddr = skb_frag_dma_map(&priv->ofdev->dev, + bufaddr = skb_frag_dma_map(priv->dev, &skb_shinfo(skb)->frags[i], 0, length, @@ -2212,7 +2213,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) lstatus |= BD_LFLAG(TXBD_TOE); } - txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data, + txbdp_start->bufPtr = dma_map_single(priv->dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE); /* If time stamping is requested one additional TxBD must be set up. The @@ -2525,7 +2526,7 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) } else buflen = bdp->length; - dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr, + dma_unmap_single(priv->dev, bdp->bufPtr, buflen, DMA_TO_DEVICE); if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) { @@ -2544,7 +2545,7 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) bdp = next_txbd(bdp, base, tx_ring_size); for (i = 0; i < frags; i++) { - dma_unmap_page(&priv->ofdev->dev, bdp->bufPtr, + dma_unmap_page(priv->dev, bdp->bufPtr, bdp->length, DMA_TO_DEVICE); bdp->lstatus &= BD_LFLAG(TXBD_WRAP); bdp = next_txbd(bdp, base, tx_ring_size); @@ -2610,7 +2611,7 @@ static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp, struct gfar_private *priv = netdev_priv(dev); dma_addr_t buf; - buf = dma_map_single(&priv->ofdev->dev, skb->data, + buf = dma_map_single(priv->dev, skb->data, priv->rx_buffer_size, DMA_FROM_DEVICE); gfar_init_rxbdp(rx_queue, bdp, buf); } @@ -2775,7 +2776,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) skb = rx_queue->rx_skbuff[rx_queue->skb_currx]; - dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr, + dma_unmap_single(priv->dev, bdp->bufPtr, priv->rx_buffer_size, DMA_FROM_DEVICE); if (unlikely(!(bdp->status & RXBD_ERR) && diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 8b4de57..8b27e5f 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -1060,6 +1060,7 @@ struct gfar_private { unsigned int total_tx_ring_size; unsigned int total_rx_ring_size; + struct device *dev; struct net_device *ndev; struct platform_device *ofdev; enum gfar_errata errata; -- cgit v0.10.2 From b597d20d59b84f0fc3735de75c3efd6e6eb4365d Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:03 +0000 Subject: gianfar: Cleanup and optimize struct gfar_private Group run-time critical fields within the 1st cacheline (32B) followed by the tx|rx_queue reference arrays and the interrupt group instances (gfargrp), all cacheline aligned. This has several benefits. Firstly comes the performance benefit by having the members required by the driver's hot path re-grouped in the structure's first cache lines, whereas the unimportant members were pushed towards the end of the struct. Another benefit comes from eliminating a 24 byte memory hole that was rendering gfar_priv's 2nd cacheline useless. The default gcc layout of gfar_private leaves an implicit 24 byte hole after the errata (enum) member. This patch fixes it. The uchar bitfields were pushed towards the end of the struct as these are not run-time performance critical (used for init time operations). Because there is no other 2 byte member around to couple the uchar bitfields memeber with, we will have an addititnal 2 byte hole after the bitfields. This is unsignificant however, and it doesn't influence gfar_priv's size, because the whole structure is padded to be a 32B multiple. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 8b27e5f..1e2ce8b 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -1049,28 +1049,64 @@ enum gfar_errata { * the buffer descriptor determines the actual condition. */ struct gfar_private { - - /* Indicates how many tx, rx queues are enabled */ - unsigned int num_tx_queues; unsigned int num_rx_queues; - unsigned int num_grps; - unsigned int mode; - - /* The total tx and rx ring size for the enabled queues */ - unsigned int total_tx_ring_size; - unsigned int total_rx_ring_size; struct device *dev; struct net_device *ndev; - struct platform_device *ofdev; enum gfar_errata errata; + unsigned int rx_buffer_size; + + u16 padding; + + /* HW time stamping enabled flag */ + int hwts_rx_en; + int hwts_tx_en; - struct gfar_priv_grp gfargrp[MAXGROUPS]; struct gfar_priv_tx_q *tx_queue[MAX_TX_QS]; struct gfar_priv_rx_q *rx_queue[MAX_RX_QS]; + struct gfar_priv_grp gfargrp[MAXGROUPS]; + + u32 device_flags; + + unsigned int mode; + unsigned int num_tx_queues; + unsigned int num_grps; + + /* Network Statistics */ + struct gfar_extra_stats extra_stats; + + /* PHY stuff */ + phy_interface_t interface; + struct device_node *phy_node; + struct device_node *tbi_node; + struct phy_device *phydev; + struct mii_bus *mii_bus; + int oldspeed; + int oldduplex; + int oldlink; + + /* Bitfield update lock */ + spinlock_t bflock; + + uint32_t msg_enable; + + struct work_struct reset_task; + + struct platform_device *ofdev; + unsigned char + extended_hash:1, + bd_stash_en:1, + rx_filer_enable:1, + /* Wake-on-LAN enabled */ + wol_en:1, + /* Enable priorty based Tx scheduling in Hw */ + prio_sched_en:1; + + /* The total tx and rx ring size for the enabled queues */ + unsigned int total_tx_ring_size; + unsigned int total_rx_ring_size; /* RX per device parameters */ - unsigned int rx_buffer_size; unsigned int rx_stash_size; unsigned int rx_stash_index; @@ -1089,39 +1125,6 @@ struct gfar_private { unsigned int fifo_starve; unsigned int fifo_starve_off; - /* Bitfield update lock */ - spinlock_t bflock; - - phy_interface_t interface; - struct device_node *phy_node; - struct device_node *tbi_node; - u32 device_flags; - unsigned char - extended_hash:1, - bd_stash_en:1, - rx_filer_enable:1, - wol_en:1, /* Wake-on-LAN enabled */ - prio_sched_en:1; /* Enable priorty based Tx scheduling in Hw */ - unsigned short padding; - - /* PHY stuff */ - struct phy_device *phydev; - struct mii_bus *mii_bus; - int oldspeed; - int oldduplex; - int oldlink; - - uint32_t msg_enable; - - struct work_struct reset_task; - - /* Network Statistics */ - struct gfar_extra_stats extra_stats; - - /* HW time stamping enabled flag */ - int hwts_rx_en; - int hwts_tx_en; - /*Filer table*/ unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; -- cgit v0.10.2 From bd9e89f29427f4accd62ce5dfe1547549f0d3fbc Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:04 +0000 Subject: gianfar: GRO_DROP is unlikely The change is significant since it affects the rx hot path. Paul observed and documented the effects at asm level, see below: "It turns out that it does make a difference, since gfar_process_frame gets inlined, and so the increment code gets moved out of line (I have marked the if statment with * and the increment code within "-----"): ------------------------- as is currently ------------------ 4d14: 80 61 00 18 lwz r3,24(r1) 4d18: 7f c4 f3 78 mr r4,r30 4d1c: 48 00 00 01 bl 4d1c * 4d20: 2f 83 00 04 cmpwi cr7,r3,4 4d24: 40 9e 00 1c bne- cr7,4d40 ---------------------------- 4d28: 81 3c 01 f8 lwz r9,504(r28) 4d2c: 81 5c 01 fc lwz r10,508(r28) 4d30: 31 4a 00 01 addic r10,r10,1 4d34: 7d 29 01 94 addze r9,r9 4d38: 91 3c 01 f8 stw r9,504(r28) 4d3c: 91 5c 01 fc stw r10,508(r28) ---------------------------- 4d40: a0 1f 00 24 lhz r0,36(r31) 4d44: 81 3f 00 00 lwz r9,0(r31) 4d48: 7f a4 eb 78 mr r4,r29 4d4c: 7f e3 fb 78 mr r3,r31 -------------------------- unlikely ------------------------ 4d14: 80 61 00 18 lwz r3,24(r1) 4d18: 7f c4 f3 78 mr r4,r30 4d1c: 48 00 00 01 bl 4d1c * 4d20: 2f 83 00 04 cmpwi cr7,r3,4 4d24: 41 9e 03 94 beq- cr7,50b8 4d28: a0 1f 00 24 lhz r0,36(r31) 4d2c: 81 3f 00 00 lwz r9,0(r31) 4d30: 7f a4 eb 78 mr r4,r29 4d34: 7f e3 fb 78 mr r3,r31 [...] 50b8: 81 3c 01 f8 lwz r9,504(r28) 50bc: 81 5c 01 fc lwz r10,508(r28) 50c0: 31 4a 00 01 addic r10,r10,1 50c4: 7d 29 01 94 addze r9,r9 50c8: 91 3c 01 f8 stw r9,504(r28) 50cc: 91 5c 01 fc stw r10,508(r28) 50d0: 4b ff fc 58 b 4d28 So, the increment does actually get moved ~1k away." Cc: Paul Gortmaker Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 592d297..af0f4d6 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2740,7 +2740,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* Send the packet up the stack */ ret = napi_gro_receive(napi, skb); - if (GRO_DROP == ret) + if (unlikely(GRO_DROP == ret)) atomic64_inc(&priv->extra_stats.kernel_dropped); return 0; -- cgit v0.10.2 From 61db26c6454b5a0bd74ec23968b568e38ea8321a Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:05 +0000 Subject: gianfar: gfar_process_frame returns void No return code is expected from gfar_process_frame(), hence change it to return void. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index af0f4d6..d70f74c 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -133,8 +133,8 @@ static void gfar_netpoll(struct net_device *dev); #endif int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit); static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue); -static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, - int amount_pull, struct napi_struct *napi); +static void gfar_process_frame(struct net_device *dev, struct sk_buff *skb, + int amount_pull, struct napi_struct *napi); void gfar_halt(struct net_device *dev); static void gfar_halt_nodisable(struct net_device *dev); void gfar_start(struct net_device *dev); @@ -2692,8 +2692,8 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) /* gfar_process_frame() -- handle one incoming packet if skb isn't NULL. */ -static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, - int amount_pull, struct napi_struct *napi) +static void gfar_process_frame(struct net_device *dev, struct sk_buff *skb, + int amount_pull, struct napi_struct *napi) { struct gfar_private *priv = netdev_priv(dev); struct rxfcb *fcb = NULL; @@ -2742,8 +2742,6 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, if (unlikely(GRO_DROP == ret)) atomic64_inc(&priv->extra_stats.kernel_dropped); - - return 0; } /* gfar_clean_rx_ring() -- Processes each frame in the rx ring -- cgit v0.10.2 From 13f228da40cacdb3c4c23c8e1272c2ad37d1e4c0 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:06 +0000 Subject: gianfar: Remove wrong buffer size conditioning to VLAN h/w offload The controller's ref manual states clearly that when the hw Rx vlan offload feature is enabled, meaning that the VLEX bit from RCTRL is correctly enabled, then the hw performs automatic VLAN tag extraction and deletion from the ethernet frames. So there's no point in trying to increase the rx buff size when rxvlan is on, as the frame is actually smaller. And the Tx vlan hw accel feature (VLINS) has nothing to do with rx buff size computation. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index d70f74c..b2c6077 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2385,9 +2385,6 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) int oldsize = priv->rx_buffer_size; int frame_size = new_mtu + ETH_HLEN; - if (gfar_is_vlan_on(priv)) - frame_size += VLAN_HLEN; - if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) { netif_err(priv, drv, dev, "Invalid MTU setting\n"); return -EINVAL; -- cgit v0.10.2 From ba7797119b486bb5992beda74bdb26be9a291b46 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 14 Feb 2013 05:00:07 +0000 Subject: gianfar: Fix and cleanup Rx FCB indication This fixes a less obvious error on one hand, and prevents futher similar errors by disambiguating and optimizing RxFCB indication, on the other hand. The error consists in NETIF_F_HW_VLAN_TX flag being used as an indication of Rx FCB insertion. This happened as soon gfar_uses_fcb(), which despite its name indicates Rx FCB insertion, started incorporating is_vlan_on(). is_vlan_on(), on the other hand, is also a misleading construct because we need to differentiate b/w hw VLAN extraction/VLEX (marked by VLAN_RX flag) and hw VLAN insertion/VLINS (VLAN_TX flag), which are different mechanisms using different types of FCBs. The hw spec for the RxFCB feature is as follows: In the case of RxBD rings, FCBs (Frame Control Block) are inserted by the eTSEC whenever RCTRL[PRSDEP] is set to a non-zero value. Only one FCB is inserted per frame (in the buffer pointed to by the RxBD with bit F set). TOE acceleration for receive is enabled for all rx frames in this case. This patch introduces priv->uses_rxfcb field to quickly signal RxFCB insertion in accordance with the specification above. The dependency on FSL_GIANFAR_DEV_HAS_TIMER was also eliminated as another source of confusion. The actual dependency is to priv->hwts_rx_en. Upon changing priv->hwts_rx_en via IOCTL, the gfar device is being restarted and on init_mac() the priv->hwts_rx_en flag determines RxFCB insertion, and rctrl is programmed accordingly. The patch takes care of this case too. Though maybe not as self documenting as the inlining version uses_fcb(), priv->uses_rxfcb has the main purpose to quickly signal, on the hot path, that the incoming frame has a *Rx* FCB block inserted which needs to be pulled out before passing the skb to the stack. This is a performance critical operation, it needs to happen fast, that's why uses_rxfcb is placed in the first cacheline of gfar_private. This is also why a cached rctrl cannot be used instead: 1) because we don't have 32 bits available in the first cacheline of gfar_priv (but only 16); 2) bit operations are expensive on the hot path. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index b2c6077..4b5e8a6 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -344,6 +344,9 @@ static void gfar_init_mac(struct net_device *ndev) /* Configure the coalescing support */ gfar_configure_coalescing(priv, 0xFF, 0xFF); + /* set this when rx hw offload (TOE) functions are being used */ + priv->uses_rxfcb = 0; + if (priv->rx_filer_enable) { rctrl |= RCTRL_FILREN; /* Program the RIR0 reg with the required distribution */ @@ -354,8 +357,10 @@ static void gfar_init_mac(struct net_device *ndev) if (ndev->flags & IFF_PROMISC) rctrl |= RCTRL_PROM; - if (ndev->features & NETIF_F_RXCSUM) + if (ndev->features & NETIF_F_RXCSUM) { rctrl |= RCTRL_CHECKSUMMING; + priv->uses_rxfcb = 1; + } if (priv->extended_hash) { rctrl |= RCTRL_EXTHASH; @@ -377,11 +382,15 @@ static void gfar_init_mac(struct net_device *ndev) } /* Enable HW time stamping if requested from user space */ - if (priv->hwts_rx_en) + if (priv->hwts_rx_en) { rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE; + priv->uses_rxfcb = 1; + } - if (ndev->features & NETIF_F_HW_VLAN_RX) + if (ndev->features & NETIF_F_HW_VLAN_RX) { rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT; + priv->uses_rxfcb = 1; + } /* Init rctrl based on our settings */ gfar_write(®s->rctrl, rctrl); @@ -500,20 +509,6 @@ void unlock_tx_qs(struct gfar_private *priv) spin_unlock(&priv->tx_queue[i]->txlock); } -static bool gfar_is_vlan_on(struct gfar_private *priv) -{ - return (priv->ndev->features & NETIF_F_HW_VLAN_RX) || - (priv->ndev->features & NETIF_F_HW_VLAN_TX); -} - -/* Returns 1 if incoming frames use an FCB */ -static inline int gfar_uses_fcb(struct gfar_private *priv) -{ - return gfar_is_vlan_on(priv) || - (priv->ndev->features & NETIF_F_RXCSUM) || - (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER); -} - static void free_tx_pointers(struct gfar_private *priv) { int i; @@ -2326,10 +2321,13 @@ void gfar_check_rx_parser_mode(struct gfar_private *priv) tempval = gfar_read(®s->rctrl); /* If parse is no longer required, then disable parser */ - if (tempval & RCTRL_REQ_PARSER) + if (tempval & RCTRL_REQ_PARSER) { tempval |= RCTRL_PRSDEP_INIT; - else + priv->uses_rxfcb = 1; + } else { tempval &= ~RCTRL_PRSDEP_INIT; + priv->uses_rxfcb = 0; + } gfar_write(®s->rctrl, tempval); } @@ -2362,6 +2360,7 @@ void gfar_vlan_mode(struct net_device *dev, netdev_features_t features) tempval = gfar_read(®s->rctrl); tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT); gfar_write(®s->rctrl, tempval); + priv->uses_rxfcb = 1; } else { /* Disable VLAN tag extraction */ tempval = gfar_read(®s->rctrl); @@ -2390,7 +2389,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } - if (gfar_uses_fcb(priv)) + if (priv->uses_rxfcb) frame_size += GMAC_FCB_LEN; frame_size += priv->padding; @@ -2759,7 +2758,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) bdp = rx_queue->cur_rx; base = rx_queue->rx_bd_base; - amount_pull = (gfar_uses_fcb(priv) ? GMAC_FCB_LEN : 0); + amount_pull = priv->uses_rxfcb ? GMAC_FCB_LEN : 0; while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) { struct sk_buff *newskb; diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 1e2ce8b..63a28d2 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -1056,6 +1056,7 @@ struct gfar_private { enum gfar_errata errata; unsigned int rx_buffer_size; + u16 uses_rxfcb; u16 padding; /* HW time stamping enabled flag */ -- cgit v0.10.2 From 68eed6ee4c70fdf71cbacf9af43a861cd7a237fb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 Feb 2013 15:23:14 +0300 Subject: brcmsmac: fix brcms_c_country_valid() ccode is not NUL terminated. Presumably insisting on a terminator makes brcms_c_country_valid() return false when it's not intended. ccode[2] is sprom->leddc_on_time. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index cdb62b8..10ee314 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -183,8 +183,7 @@ static bool brcms_c_country_valid(const char *ccode) * chars. */ if (!((0x80 & ccode[0]) == 0 && ccode[0] >= 0x41 && ccode[0] <= 0x5A && - (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A && - ccode[2] == '\0')) + (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A)) return false; /* -- cgit v0.10.2 From 06e7cda3ce30dadc3454539127b4cfc3888c349e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 12 Feb 2013 16:09:02 -0600 Subject: rtlwifi: Rework Kconfig As the number of drivers in the rtlwifi family has grown, the Kconfig section for them has grown unwieldy. This change has two effects: (1) Variable RTLWIFI_DEBUG is documented, and (2) the entries for the drivers that depend on RTLWIFI are indented. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index b80bc46..b6aa0c4 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -1,8 +1,26 @@ +config RTLWIFI + tristate "Realtek wireless card support" + depends on MAC80211 + select FW_LOADER + ---help--- + This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE + drivers. This module does nothing by itself - the various front-end + drivers need to be enabled to support any desired devices. + + If you choose to build as a module, it'll be called rtlwifi. + +config RTLWIFI_DEBUG + bool "Debugging output for rtlwifi driver family" + depends on RTLWIFI + default y + ---help--- + To use the module option that sets the dynamic-debugging level for, + the front-end driver, this parameter must be "Y". For memory-limited + systems, choose "N". If in doubt, choose "Y". + config RTL8192CE tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe @@ -12,9 +30,7 @@ config RTL8192CE config RTL8192SE tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe wireless network adapters. @@ -23,9 +39,7 @@ config RTL8192SE config RTL8192DE tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe wireless network adapters. @@ -34,9 +48,7 @@ config RTL8192DE config RTL8723AE tristate "Realtek RTL8723AE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI && EXPERIMENTAL - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8723AE 802.11n PCIe wireless network adapters. @@ -45,9 +57,7 @@ config RTL8723AE config RTL8192CU tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter" - depends on MAC80211 && USB - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && USB select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB @@ -55,16 +65,6 @@ config RTL8192CU If you choose to build it as a module, it will be called rtl8192cu -config RTLWIFI - tristate - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE - default m - -config RTLWIFI_DEBUG - bool "Additional debugging output" - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE - default y - config RTL8192C_COMMON tristate depends on RTL8192CE || RTL8192CU -- cgit v0.10.2 From 52301a815e81cdcbcf971ba28df0376dc7f3961c Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 12 Feb 2013 14:38:32 -0800 Subject: mwifiex: device specific sleep cookie handling for PCIe This patch adds support for handling of PCIe sleep cookie depending upon device properties. Some PCIe devices need sleep cookie probing before accessing HW while some others don't. A new sleep_cookie variable is defined as part of mwifiex_pcie_card_reg strcture and set/reset as per device capability. Sleep cookie is allocated/accessed/freed only when flag sleep_cookie for this particular device is enabled. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 3b9be7c..492655c0 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -62,6 +62,10 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter) { u32 *cookie_addr; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (!reg->sleep_cookie) + return true; if (card->sleep_cookie_vbase) { cookie_addr = (u32 *)card->sleep_cookie_vbase; @@ -299,8 +303,10 @@ static int mwifiex_read_reg(struct mwifiex_adapter *adapter, int reg, u32 *data) static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) { int i = 0; + struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - while (mwifiex_pcie_ok_to_access_hw(adapter)) { + while (reg->sleep_cookie && mwifiex_pcie_ok_to_access_hw(adapter)) { i++; usleep_range(10, 20); /* 50ms max wait */ @@ -1513,8 +1519,8 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); - while (mwifiex_pcie_ok_to_access_hw(adapter) && - (count++ < 10)) + while (reg->sleep_cookie && (count++ < 10) && + mwifiex_pcie_ok_to_access_hw(adapter)) usleep_range(50, 60); } else { dev_err(adapter->dev, @@ -2172,6 +2178,7 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; int ret; struct pci_dev *pdev = card->dev; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; pci_set_drvdata(pdev, card); @@ -2234,10 +2241,13 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) ret = mwifiex_pcie_alloc_cmdrsp_buf(adapter); if (ret) goto err_alloc_cmdbuf; - ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); - if (ret) - goto err_alloc_cookie; - + if (reg->sleep_cookie) { + ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); + if (ret) + goto err_alloc_cookie; + } else { + card->sleep_cookie_vbase = NULL; + } return ret; err_alloc_cookie: @@ -2334,12 +2344,16 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg; if (card) { dev_dbg(adapter->dev, "%s(): calling free_irq()\n", __func__); free_irq(card->dev->irq, card->dev); - mwifiex_pcie_delete_sleep_cookie_buf(adapter); + reg = card->pcie.reg; + if (reg->sleep_cookie) + mwifiex_pcie_delete_sleep_cookie_buf(adapter); + mwifiex_pcie_delete_cmdrsp_buf(adapter); mwifiex_pcie_delete_evtbd_ring(adapter); mwifiex_pcie_delete_rxbd_ring(adapter); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 6080615..d322ab8 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -126,6 +126,7 @@ struct mwifiex_pcie_card_reg { u8 ring_flag_xs_eop; u32 ring_tx_start_ptr; u8 pfu_enabled; + u8 sleep_cookie; }; static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { @@ -156,6 +157,7 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { .ring_flag_xs_eop = 0, .ring_tx_start_ptr = 0, .pfu_enabled = 0, + .sleep_cookie = 1, }; static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { @@ -186,6 +188,7 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { .ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP, .ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR, .pfu_enabled = 1, + .sleep_cookie = 0, }; struct mwifiex_pcie_device { -- cgit v0.10.2 From 4ea545d476d3182056aeb042c439237ed61d261e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Feb 2013 14:27:05 +0100 Subject: rt2x00: check for dma mappings errors Check output of dma_map_single functions which nowadays can fail (when IOMMU is used). On write_beacon callbacks just print error, similar like padding error is handled by rt2800_write_beacon. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index a2d2bc2..221beaa 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1185,8 +1185,14 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(entry); - + if (rt2x00queue_map_txskb(entry)) { + ERROR(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } + /* + * Enable beaconing again. + */ + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); /* * Write the TX descriptor for the beacon. */ @@ -1196,7 +1202,7 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - +out: /* * Enable beaconing again. */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 9bea10f..39edc59 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1338,7 +1338,10 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(entry); + if (rt2x00queue_map_txskb(entry)) { + ERROR(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } /* * Write the TX descriptor for the beacon. @@ -1349,7 +1352,7 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - +out: /* * Enable beaconing again. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 9a3f31a..086abb4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1169,8 +1169,10 @@ static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev) /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @entry: Pointer to &struct queue_entry + * + * Returns -ENOMEM if mapping fail, 0 otherwise. */ -void rt2x00queue_map_txskb(struct queue_entry *entry); +int rt2x00queue_map_txskb(struct queue_entry *entry); /** * rt2x00queue_unmap_skb - Unmap a skb from DMA. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f35d85a..e26ec9d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -87,24 +87,35 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) skbdesc->entry = entry; if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) { - skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, - skb->data, - skb->len, - DMA_FROM_DEVICE); + dma_addr_t skb_dma; + + skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(rt2x00dev->dev, skb_dma))) { + dev_kfree_skb_any(skb); + return NULL; + } + + skbdesc->skb_dma = skb_dma; skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; } return skb; } -void rt2x00queue_map_txskb(struct queue_entry *entry) +int rt2x00queue_map_txskb(struct queue_entry *entry) { struct device *dev = entry->queue->rt2x00dev->dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); skbdesc->skb_dma = dma_map_single(dev, entry->skb->data, entry->skb->len, DMA_TO_DEVICE); + + if (unlikely(dma_mapping_error(dev, skbdesc->skb_dma))) + return -ENOMEM; + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; + return 0; } EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); @@ -545,8 +556,9 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry, /* * Map the skb to DMA. */ - if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) - rt2x00queue_map_txskb(entry); + if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags) && + rt2x00queue_map_txskb(entry)) + return -ENOMEM; return 0; } -- cgit v0.10.2 From bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Feb 2013 15:49:08 +0100 Subject: iwlegacy: more checks for dma mapping errors This patch check output of pci_map_single() calls. I missed them on my previous patch "iwlegacy: check for dma mapping errors", which fixed only pci_map_page() calls. To handle remaining possible dma mappings errors, we need to rearrange ilXXXX_tx_skb() and il_enqueue_hcmd() functions. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 83856d1..3630a41 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -572,26 +572,11 @@ il3945_tx_skb(struct il_priv *il, il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id); /* Total # bytes to be transmitted */ - len = (u16) skb->len; - tx_cmd->len = cpu_to_le16(len); + tx_cmd->len = cpu_to_le16((u16) skb->len); - il_update_stats(il, true, fc, len); tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); - D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); - il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, - ieee80211_hdrlen(fc)); - /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -610,14 +595,8 @@ il3945_tx_skb(struct il_priv *il, * within command buffer array. */ txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE); - /* we do not map meta data ... so we can safely access address to - * provide to unmap command*/ - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, len); - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -626,10 +605,34 @@ il3945_tx_skb(struct il_priv *il, phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len, len, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, len); + if (len) il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0, U32_PAD(len)); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; } + il_update_stats(il, true, fc, skb->len); + + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); + D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); + il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); + il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, + ieee80211_hdrlen(fc)); + /* Tell device the write idx *just past* this latest filled TFD */ q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); il_txq_update_write_ptr(il, txq); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 835662a..7941eb3 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -1793,8 +1793,7 @@ il4965_tx_skb(struct il_priv *il, memcpy(tx_cmd->hdr, hdr, hdr_len); /* Total # bytes to be transmitted */ - len = (u16) skb->len; - tx_cmd->len = cpu_to_le16(len); + tx_cmd->len = cpu_to_le16((u16) skb->len); if (info->control.hw_key) il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); @@ -1804,7 +1803,6 @@ il4965_tx_skb(struct il_priv *il, il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); - il_update_stats(il, true, fc, len); /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -1826,18 +1824,8 @@ il4965_tx_skb(struct il_priv *il, txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, PCI_DMA_BIDIRECTIONAL); - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -1846,8 +1834,24 @@ il4965_tx_skb(struct il_priv *il, phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, firstlen); + if (secondlen) il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0, 0); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; } scratch_phys = @@ -1860,6 +1864,8 @@ il4965_tx_skb(struct il_priv *il, tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); + il_update_stats(il, true, fc, skb->len); + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 1f59860..4ed2949 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -3162,18 +3162,23 @@ il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) idx, il->cmd_queue); } #endif - txq->need_update = 1; - - if (il->ops->txq_update_byte_cnt_tbl) - /* Set up entry in queue's byte count circular buffer */ - il->ops->txq_update_byte_cnt_tbl(il, txq, 0); phys_addr = pci_map_single(il->pci_dev, &out_cmd->hdr, fix_size, PCI_DMA_BIDIRECTIONAL); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) { + idx = -ENOMEM; + goto out; + } dma_unmap_addr_set(out_meta, mapping, phys_addr); dma_unmap_len_set(out_meta, len, fix_size); + txq->need_update = 1; + + if (il->ops->txq_update_byte_cnt_tbl) + /* Set up entry in queue's byte count circular buffer */ + il->ops->txq_update_byte_cnt_tbl(il, txq, 0); + il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, fix_size, 1, U32_PAD(cmd->len)); @@ -3181,6 +3186,7 @@ il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); il_txq_update_write_ptr(il, txq); +out: spin_unlock_irqrestore(&il->hcmd_lock, flags); return idx; } -- cgit v0.10.2 From e81c7e93b8f047bd0fe2cd150b0866c9da4c201d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 13 Feb 2013 17:33:20 -0800 Subject: brcmsmac: Downgrade d11hdrs_mac80211 error messages to warnings. These messages don't seem to be errors but notifications that some attribute isn't quite right. Don't mark them as errors. Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index e80825e..b3ea15e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -6443,10 +6443,9 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, if ((txrate[k]->flags & IEEE80211_TX_RC_MCS) && (!is_mcs_rate(rspec[k]))) { - brcms_err(wlc->hw->d11core, - "wl%d: %s: IEEE80211_TX_" - "RC_MCS != is_mcs_rate(rspec)\n", - wlc->pub->unit, __func__); + brcms_warn(wlc->hw->d11core, + "wl%d: %s: IEEE80211_TX_RC_MCS != is_mcs_rate(rspec)\n", + wlc->pub->unit, __func__); } if (is_mcs_rate(rspec[k])) { @@ -6838,21 +6837,19 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, wlc->fragthresh[queue] = (u16) newfragthresh; } else { - brcms_err(wlc->hw->d11core, - "wl%d: %s txop invalid " - "for rate %d\n", - wlc->pub->unit, fifo_names[queue], - rspec2rate(rspec[0])); + brcms_warn(wlc->hw->d11core, + "wl%d: %s txop invalid for rate %d\n", + wlc->pub->unit, fifo_names[queue], + rspec2rate(rspec[0])); } if (dur > wlc->edcf_txop[ac]) - brcms_err(wlc->hw->d11core, - "wl%d: %s: %s txop " - "exceeded phylen %d/%d dur %d/%d\n", - wlc->pub->unit, __func__, - fifo_names[queue], - phylen, wlc->fragthresh[queue], - dur, wlc->edcf_txop[ac]); + brcms_warn(wlc->hw->d11core, + "wl%d: %s: %s txop exceeded phylen %d/%d dur %d/%d\n", + wlc->pub->unit, __func__, + fifo_names[queue], + phylen, wlc->fragthresh[queue], + dur, wlc->edcf_txop[ac]); } } -- cgit v0.10.2 From b56e681b6210a635af4e4eb93ce81b4654851033 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 13 Feb 2013 17:33:21 -0800 Subject: brcmsmac: Remove unnecessary memset casts Remove the casts of the first argument of memset. Neaten the style by using the sizeof the actual variable being memset not the sizeof the type of variable. Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index b3ea15e..8ef02dc 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -3138,8 +3138,7 @@ void brcms_c_reset(struct brcms_c_info *wlc) brcms_c_statsupd(wlc); /* reset our snapshot of macstat counters */ - memset((char *)wlc->core->macstat_snapshot, 0, - sizeof(struct macstat)); + memset(wlc->core->macstat_snapshot, 0, sizeof(struct macstat)); brcms_b_reset(wlc->hw); } @@ -4052,7 +4051,7 @@ void brcms_c_wme_setparams(struct brcms_c_info *wlc, u16 aci, return; } - memset((char *)&acp_shm, 0, sizeof(struct shm_acparams)); + memset(&acp_shm, 0, sizeof(struct shm_acparams)); /* fill in shm ac params struct */ acp_shm.txop = params->txop; /* convert from units of 32us to us for ucode */ @@ -4768,7 +4767,7 @@ static void brcms_c_bss_default_init(struct brcms_c_info *wlc) struct brcms_bss_info *bi = wlc->default_bss; /* init default and target BSS with some sane initial values */ - memset((char *)(bi), 0, sizeof(struct brcms_bss_info)); + memset(bi, 0, sizeof(*bi)); bi->beacon_period = BEACON_INTERVAL_DEFAULT; /* fill the default channel as the first valid channel @@ -5297,7 +5296,7 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config) brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER, gmode); /* Clear rateset override */ - memset(&rs, 0, sizeof(struct brcms_c_rateset)); + memset(&rs, 0, sizeof(rs)); switch (gmode) { case GMODE_LEGACY_B: @@ -5520,7 +5519,7 @@ int brcms_c_set_rateset(struct brcms_c_info *wlc, struct brcm_rateset *rs) if (rs->count > BRCMS_NUMRATES) return -ENOBUFS; - memset(&internal_rs, 0, sizeof(struct brcms_c_rateset)); + memset(&internal_rs, 0, sizeof(internal_rs)); /* Copy only legacy rateset section */ internal_rs.count = rs->count; @@ -5623,7 +5622,7 @@ int brcms_c_module_unregister(struct brcms_pub *pub, const char *name, for (i = 0; i < BRCMS_MAXMODULES; i++) { if (!strcmp(wlc->modulecb[i].name, name) && (wlc->modulecb[i].hdl == hdl)) { - memset(&wlc->modulecb[i], 0, sizeof(struct modulecb)); + memset(&wlc->modulecb[i], 0, sizeof(wlc->modulecb[i])); return 0; } } @@ -6678,11 +6677,9 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, (struct ofdm_phy_hdr *) rts_plcp) : rts_plcp[0]) << 8; } else { - memset((char *)txh->RTSPhyHeader, 0, D11_PHY_HDR_LEN); - memset((char *)&txh->rts_frame, 0, - sizeof(struct ieee80211_rts)); - memset((char *)txh->RTSPLCPFallback, 0, - sizeof(txh->RTSPLCPFallback)); + memset(txh->RTSPhyHeader, 0, D11_PHY_HDR_LEN); + memset(&txh->rts_frame, 0, sizeof(struct ieee80211_rts)); + memset(txh->RTSPLCPFallback, 0, sizeof(txh->RTSPLCPFallback)); txh->RTSDurFallback = 0; } @@ -7324,7 +7321,7 @@ brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type, *len = hdr_len + body_len; /* format PHY and MAC headers */ - memset((char *)buf, 0, hdr_len); + memset(buf, 0, hdr_len); plcp = (struct cck_phy_hdr *) buf; -- cgit v0.10.2 From 9754e293491e3a4e6c1ac020d25140b1ed3d9cd2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 14 Feb 2013 15:57:38 -0500 Subject: net: Don't write to current task flags on every packet received. Even for non-pfmalloc SKBs, __netif_receive_skb() will do a tsk_restore_flags() on current unconditionally. Make __netif_receive_skb() a shim around the existing code, renamed to __netif_receive_skb_core(). Let __netif_receive_skb() wrap the __netif_receive_skb_core() call with the task flag modifications, if necessary. Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 2f31bf9..f444736 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3457,7 +3457,7 @@ static bool skb_pfmemalloc_protocol(struct sk_buff *skb) } } -static int __netif_receive_skb(struct sk_buff *skb) +static int __netif_receive_skb_core(struct sk_buff *skb, bool pfmemalloc) { struct packet_type *ptype, *pt_prev; rx_handler_func_t *rx_handler; @@ -3466,24 +3466,11 @@ static int __netif_receive_skb(struct sk_buff *skb) bool deliver_exact = false; int ret = NET_RX_DROP; __be16 type; - unsigned long pflags = current->flags; net_timestamp_check(!netdev_tstamp_prequeue, skb); trace_netif_receive_skb(skb); - /* - * PFMEMALLOC skbs are special, they should - * - be delivered to SOCK_MEMALLOC sockets only - * - stay away from userspace - * - have bounded memory usage - * - * Use PF_MEMALLOC as this saves us from propagating the allocation - * context down to all allocation sites. - */ - if (sk_memalloc_socks() && skb_pfmemalloc(skb)) - current->flags |= PF_MEMALLOC; - /* if we've gotten here through NAPI, check netpoll */ if (netpoll_receive_skb(skb)) goto out; @@ -3517,7 +3504,7 @@ another_round: } #endif - if (sk_memalloc_socks() && skb_pfmemalloc(skb)) + if (pfmemalloc) goto skip_taps; list_for_each_entry_rcu(ptype, &ptype_all, list) { @@ -3536,8 +3523,7 @@ skip_taps: ncls: #endif - if (sk_memalloc_socks() && skb_pfmemalloc(skb) - && !skb_pfmemalloc_protocol(skb)) + if (pfmemalloc && !skb_pfmemalloc_protocol(skb)) goto drop; if (vlan_tx_tag_present(skb)) { @@ -3607,7 +3593,31 @@ drop: unlock: rcu_read_unlock(); out: - tsk_restore_flags(current, pflags, PF_MEMALLOC); + return ret; +} + +static int __netif_receive_skb(struct sk_buff *skb) +{ + int ret; + + if (sk_memalloc_socks() && skb_pfmemalloc(skb)) { + unsigned long pflags = current->flags; + + /* + * PFMEMALLOC skbs are special, they should + * - be delivered to SOCK_MEMALLOC sockets only + * - stay away from userspace + * - have bounded memory usage + * + * Use PF_MEMALLOC as this saves us from propagating the allocation + * context down to all allocation sites. + */ + current->flags |= PF_MEMALLOC; + ret = __netif_receive_skb_core(skb, true); + tsk_restore_flags(current, pflags, PF_MEMALLOC); + } else + ret = __netif_receive_skb_core(skb, false); + return ret; } -- cgit v0.10.2 From 04f39047af2a6df64b763ea5a271db24879d0391 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:19 +0100 Subject: nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7e6569e..ee11a3d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -114,6 +114,9 @@ enum ieee80211_channel_flags { #define IEEE80211_CHAN_NO_HT40 \ (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) +#define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 +#define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) + /** * struct ieee80211_channel - channel definition * @@ -134,6 +137,9 @@ enum ieee80211_channel_flags { * to enable this, this is useful only on 5 GHz band. * @orig_mag: internal use * @orig_mpwr: internal use + * @dfs_state: current state of this channel. Only relevant if radar is required + * on this channel. + * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. */ struct ieee80211_channel { enum ieee80211_band band; @@ -146,6 +152,8 @@ struct ieee80211_channel { bool beacon_found; u32 orig_flags; int orig_mag, orig_mpwr; + enum nl80211_dfs_state dfs_state; + unsigned long dfs_state_entered; }; /** @@ -569,6 +577,7 @@ struct cfg80211_acl_data { * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control + * @radar_required: set if radar detection is required */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -586,6 +595,7 @@ struct cfg80211_ap_settings { u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; + bool radar_required; }; /** @@ -1909,6 +1919,8 @@ struct cfg80211_gtk_rekey_data { * this new list replaces the existing one. Driver has to clear its ACL * when number of MAC addresses entries is passed as 0. Drivers which * advertise the support for MAC based ACL have to implement this callback. + * + * @start_radar_detection: Start radar detection in the driver. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2132,6 +2144,10 @@ struct cfg80211_ops { int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_acl_data *params); + + int (*start_radar_detection)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef); }; /* @@ -2715,6 +2731,8 @@ struct cfg80211_cached_keys; * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @p2p_started: true if this is a P2P Device that has been started + * @cac_started: true if DFS channel availability check has been started + * @cac_start_time: timestamp (jiffies) when the dfs state was entered. */ struct wireless_dev { struct wiphy *wiphy; @@ -2766,6 +2784,9 @@ struct wireless_dev { u32 ap_unexpected_nlportid; + bool cac_started; + unsigned long cac_start_time; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -3755,6 +3776,31 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, gfp_t gfp); /** + * cfg80211_radar_event - radar detection event + * @wiphy: the wiphy + * @chandef: chandef for the current channel + * @gfp: context flags + * + * This function is called when a radar is detected on the current chanenl. + */ +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, gfp_t gfp); + +/** + * cfg80211_cac_event - Channel availability check (CAC) event + * @netdev: network device + * @event: type of event + * @gfp: context flags + * + * This function is called when a Channel availability check (CAC) is finished + * or aborted. This must be called to notify the completion of a CAC process, + * also by full-MAC drivers. + */ +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp); + + +/** * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer * @dev: network device * @peer: peer's MAC address diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5309b34..90b7af8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -603,6 +603,14 @@ * command is used in AP/P2P GO mode. Driver has to make sure to clear its * ACL list during %NL80211_CMD_STOP_AP. * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -755,6 +763,8 @@ enum nl80211_commands { NL80211_CMD_SET_MAC_ACL, + NL80211_CMD_RADAR_DETECT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1342,6 +1352,9 @@ enum nl80211_commands { * number of MAC addresses that a device can support for MAC * ACL. * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1620,6 +1633,8 @@ enum nl80211_attrs { NL80211_ATTR_MAC_ACL_MAX, + NL80211_ATTR_RADAR_EVENT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2022,6 +2037,10 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2034,6 +2053,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3489,4 +3510,44 @@ enum nl80211_acl_policy { NL80211_ACL_POLICY_DENY_UNLESS_LISTED, }; +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ + +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 396373f..810c23c 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -147,6 +147,32 @@ static void chandef_primary_freqs(const struct cfg80211_chan_def *c, } } +static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) +{ + int width; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + width = 20; + break; + case NL80211_CHAN_WIDTH_40: + width = 40; + break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_80: + width = 80; + break; + case NL80211_CHAN_WIDTH_160: + width = 160; + break; + default: + WARN_ON_ONCE(1); + return -1; + } + return width; +} + const struct cfg80211_chan_def * cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, const struct cfg80211_chan_def *c2) @@ -192,6 +218,93 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, } EXPORT_SYMBOL(cfg80211_chandef_compatible); +static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq, + u32 bandwidth, + enum nl80211_dfs_state dfs_state) +{ + struct ieee80211_channel *c; + u32 freq; + + for (freq = center_freq - bandwidth/2 + 10; + freq <= center_freq + bandwidth/2 - 10; + freq += 20) { + c = ieee80211_get_channel(wiphy, freq); + if (!c || !(c->flags & IEEE80211_CHAN_RADAR)) + continue; + + c->dfs_state = dfs_state; + c->dfs_state_entered = jiffies; + } +} + +void cfg80211_set_dfs_state(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + enum nl80211_dfs_state dfs_state) +{ + int width; + + if (WARN_ON(!cfg80211_chandef_valid(chandef))) + return; + + width = cfg80211_chandef_get_width(chandef); + if (width < 0) + return; + + cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1, + width, dfs_state); + + if (!chandef->center_freq2) + return; + cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2, + width, dfs_state); +} + +static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy, + u32 center_freq, + u32 bandwidth) +{ + struct ieee80211_channel *c; + u32 freq; + + for (freq = center_freq - bandwidth/2 + 10; + freq <= center_freq + bandwidth/2 - 10; + freq += 20) { + c = ieee80211_get_channel(wiphy, freq); + if (!c) + return -EINVAL; + + if (c->flags & IEEE80211_CHAN_RADAR) + return 1; + } + return 0; +} + + +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef) +{ + int width; + int r; + + if (WARN_ON(!cfg80211_chandef_valid(chandef))) + return -EINVAL; + + width = cfg80211_chandef_get_width(chandef); + if (width < 0) + return -EINVAL; + + r = cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq1, + width); + if (r) + return r; + + if (!chandef->center_freq2) + return 0; + + return cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq2, + width); +} + static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, u32 center_freq, u32 bandwidth, u32 prohibited_flags) @@ -203,7 +316,16 @@ static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, freq <= center_freq + bandwidth/2 - 10; freq += 20) { c = ieee80211_get_channel(wiphy, freq); - if (!c || c->flags & prohibited_flags) + if (!c) + return false; + + /* check for radar flags */ + if ((prohibited_flags & c->flags & IEEE80211_CHAN_RADAR) && + (c->dfs_state != NL80211_DFS_AVAILABLE)) + return false; + + /* check for the other flags */ + if (c->flags & prohibited_flags & ~IEEE80211_CHAN_RADAR) return false; } @@ -344,7 +466,10 @@ cfg80211_get_chan_state(struct wireless_dev *wdev, break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_P2P_GO: - if (wdev->beacon_interval) { + if (wdev->cac_started) { + *chan = wdev->channel; + *chanmode = CHAN_MODE_SHARED; + } else if (wdev->beacon_interval) { *chan = wdev->channel; *chanmode = CHAN_MODE_SHARED; } diff --git a/net/wireless/core.c b/net/wireless/core.c index f0a1bbe..9220021 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -324,6 +324,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) INIT_LIST_HEAD(&rdev->bss_list); INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done); INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results); + INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk, + cfg80211_dfs_channels_update_work); #ifdef CONFIG_CFG80211_WEXT rdev->wiphy.wext = &cfg80211_wext_handler; #endif @@ -695,6 +697,7 @@ void wiphy_unregister(struct wiphy *wiphy) flush_work(&rdev->scan_done_wk); cancel_work_sync(&rdev->conn_work); flush_work(&rdev->event_work); + cancel_delayed_work_sync(&rdev->dfs_update_channels_wk); if (rdev->wowlan && rdev->ops->set_wakeup) rdev_set_wakeup(rdev, false); diff --git a/net/wireless/core.h b/net/wireless/core.h index 949c957..3aec0e4 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -86,6 +86,8 @@ struct cfg80211_registered_device { struct cfg80211_wowlan *wowlan; + struct delayed_work dfs_update_channels_wk; + /* must be last because of the way we do wiphy_priv(), * and it should at least be aligned to NETDEV_ALIGN */ struct wiphy wiphy __aligned(NETDEV_ALIGN); @@ -431,6 +433,22 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode, u8 radar_detect); +/** + * cfg80211_chandef_dfs_required - checks if radar detection is required + * @wiphy: the wiphy to validate against + * @chandef: the channel definition to check + * Return: 1 if radar detection is required, 0 if it is not, < 0 on error + */ +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *c); + +void cfg80211_set_dfs_state(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + enum nl80211_dfs_state dfs_state); + +void cfg80211_dfs_channels_update_work(struct work_struct *work); + + static inline int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, @@ -457,6 +475,16 @@ cfg80211_can_use_chan(struct cfg80211_registered_device *rdev, chan, chanmode, 0); } +static inline unsigned int elapsed_jiffies_msecs(unsigned long start) +{ + unsigned long end = jiffies; + + if (end >= start) + return jiffies_to_msecs(end - start); + + return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); +} + void cfg80211_get_chan_state(struct wireless_dev *wdev, struct ieee80211_channel **chan, diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 8e69207..caddca3 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -987,3 +987,123 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, nl80211_pmksa_candidate_notify(rdev, dev, index, bssid, preauth, gfp); } EXPORT_SYMBOL(cfg80211_pmksa_candidate_notify); + +void cfg80211_dfs_channels_update_work(struct work_struct *work) +{ + struct delayed_work *delayed_work; + struct cfg80211_registered_device *rdev; + struct cfg80211_chan_def chandef; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *c; + struct wiphy *wiphy; + bool check_again = false; + unsigned long timeout, next_time = 0; + int bandid, i; + + delayed_work = container_of(work, struct delayed_work, work); + rdev = container_of(delayed_work, struct cfg80211_registered_device, + dfs_update_channels_wk); + wiphy = &rdev->wiphy; + + mutex_lock(&cfg80211_mutex); + for (bandid = 0; bandid < IEEE80211_NUM_BANDS; bandid++) { + sband = wiphy->bands[bandid]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + c = &sband->channels[i]; + + if (c->dfs_state != NL80211_DFS_UNAVAILABLE) + continue; + + timeout = c->dfs_state_entered + + IEEE80211_DFS_MIN_NOP_TIME_MS; + + if (time_after_eq(jiffies, timeout)) { + c->dfs_state = NL80211_DFS_USABLE; + cfg80211_chandef_create(&chandef, c, + NL80211_CHAN_NO_HT); + + nl80211_radar_notify(rdev, &chandef, + NL80211_RADAR_NOP_FINISHED, + NULL, GFP_ATOMIC); + continue; + } + + if (!check_again) + next_time = timeout - jiffies; + else + next_time = min(next_time, timeout - jiffies); + check_again = true; + } + } + mutex_unlock(&cfg80211_mutex); + + /* reschedule if there are other channels waiting to be cleared again */ + if (check_again) + queue_delayed_work(cfg80211_wq, &rdev->dfs_update_channels_wk, + next_time); +} + + +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, + gfp_t gfp) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + unsigned long timeout; + + trace_cfg80211_radar_event(wiphy, chandef); + + /* only set the chandef supplied channel to unavailable, in + * case the radar is detected on only one of multiple channels + * spanned by the chandef. + */ + cfg80211_set_dfs_state(wiphy, chandef, NL80211_DFS_UNAVAILABLE); + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_NOP_TIME_MS); + queue_delayed_work(cfg80211_wq, &rdev->dfs_update_channels_wk, + timeout); + + nl80211_radar_notify(rdev, chandef, NL80211_RADAR_DETECTED, NULL, gfp); +} +EXPORT_SYMBOL(cfg80211_radar_event); + +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp) +{ + struct wireless_dev *wdev = netdev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + struct cfg80211_chan_def chandef; + unsigned long timeout; + + trace_cfg80211_cac_event(netdev, event); + + if (WARN_ON(!wdev->cac_started)) + return; + + if (WARN_ON(!wdev->channel)) + return; + + cfg80211_chandef_create(&chandef, wdev->channel, NL80211_CHAN_NO_HT); + + switch (event) { + case NL80211_RADAR_CAC_FINISHED: + timeout = wdev->cac_start_time + + msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + WARN_ON(!time_after_eq(jiffies, timeout)); + cfg80211_set_dfs_state(wiphy, &chandef, NL80211_DFS_AVAILABLE); + break; + case NL80211_RADAR_CAC_ABORTED: + break; + default: + WARN_ON(1); + return; + } + wdev->cac_started = false; + + nl80211_radar_notify(rdev, &chandef, event, netdev, gfp); +} +EXPORT_SYMBOL(cfg80211_cac_event); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d29a461..c1e18cc 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -552,9 +552,16 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_NO_IBSS) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IBSS)) goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_RADAR) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) - goto nla_put_failure; + if (chan->flags & IEEE80211_CHAN_RADAR) { + u32 time = elapsed_jiffies_msecs(chan->dfs_state_entered); + if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) + goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_STATE, + chan->dfs_state)) + goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time)) + goto nla_put_failure; + } if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) @@ -2775,6 +2782,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_ap_settings params; int err; + u8 radar_detect_width = 0; if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) @@ -2893,9 +2901,19 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef)) return -EINVAL; + err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef); + if (err < 0) + return err; + if (err) { + radar_detect_width = BIT(params.chandef.width); + params.radar_required = true; + } + mutex_lock(&rdev->devlist_mtx); - err = cfg80211_can_use_chan(rdev, wdev, params.chandef.chan, - CHAN_MODE_SHARED); + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + params.chandef.chan, + CHAN_MODE_SHARED, + radar_detect_width); mutex_unlock(&rdev->devlist_mtx); if (err) @@ -5055,6 +5073,54 @@ static int nl80211_stop_sched_scan(struct sk_buff *skb, return err; } +static int nl80211_start_radar_detection(struct sk_buff *skb, + struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_chan_def chandef; + int err; + + err = nl80211_parse_chandef(rdev, info, &chandef); + if (err) + return err; + + if (wdev->cac_started) + return -EBUSY; + + err = cfg80211_chandef_dfs_required(wdev->wiphy, &chandef); + if (err < 0) + return err; + + if (err == 0) + return -EINVAL; + + if (chandef.chan->dfs_state != NL80211_DFS_USABLE) + return -EINVAL; + + if (!rdev->ops->start_radar_detection) + return -EOPNOTSUPP; + + mutex_lock(&rdev->devlist_mtx); + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + chandef.chan, CHAN_MODE_SHARED, + BIT(chandef.width)); + if (err) + goto err_locked; + + err = rdev->ops->start_radar_detection(&rdev->wiphy, dev, &chandef); + if (!err) { + wdev->channel = chandef.chan; + wdev->cac_started = true; + wdev->cac_start_time = jiffies; + } +err_locked: + mutex_unlock(&rdev->devlist_mtx); + + return err; +} + static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, u32 seq, int flags, struct cfg80211_registered_device *rdev, @@ -8305,6 +8371,14 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_RADAR_DETECT, + .doit = nl80211_start_radar_detection, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { @@ -9502,6 +9576,57 @@ nl80211_send_cqm_txe_notify(struct cfg80211_registered_device *rdev, } void +nl80211_radar_notify(struct cfg80211_registered_device *rdev, + struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, + struct net_device *netdev, gfp_t gfp) +{ + struct sk_buff *msg; + void *hdr; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_RADAR_DETECT); + if (!hdr) { + nlmsg_free(msg); + return; + } + + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx)) + goto nla_put_failure; + + /* NOP and radar events don't need a netdev parameter */ + if (netdev) { + struct wireless_dev *wdev = netdev->ieee80211_ptr; + + if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev))) + goto nla_put_failure; + } + + if (nla_put_u32(msg, NL80211_ATTR_RADAR_EVENT, event)) + goto nla_put_failure; + + if (nl80211_send_chandef(msg, chandef)) + goto nla_put_failure; + + if (genlmsg_end(msg, hdr) < 0) { + nlmsg_free(msg); + return; + } + + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0, + nl80211_mlme_mcgrp.id, gfp); + return; + + nla_put_failure: + genlmsg_cancel(msg, hdr); + nlmsg_free(msg); +} + +void nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *peer, u32 num_packets, gfp_t gfp) diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index 2acba84..b061da4 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -108,6 +108,13 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); + +void +nl80211_radar_notify(struct cfg80211_registered_device *rdev, + struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, + struct net_device *netdev, gfp_t gfp); + void nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *peer, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 08d3da2..e97d5b0 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -884,6 +884,9 @@ static void handle_channel(struct wiphy *wiphy, return; } + chan->dfs_state = NL80211_DFS_USABLE; + chan->dfs_state_entered = jiffies; + chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d0fc6da..f0d9b51 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1210,16 +1210,6 @@ static void ieee80211_scan_add_ies(struct iw_request_info *info, } } -static inline unsigned int elapsed_jiffies_msecs(unsigned long start) -{ - unsigned long end = jiffies; - - if (end >= start) - return jiffies_to_msecs(end - start); - - return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); -} - static char * ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, struct cfg80211_internal_bss *bss, char *current_ev, diff --git a/net/wireless/trace.h b/net/wireless/trace.h index c9cafb0..b7a5313 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2051,6 +2051,21 @@ TRACE_EVENT(cfg80211_reg_can_beacon, WIPHY_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(cfg80211_chandef_dfs_required, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, CHAN_DEF_PR_ARG) +); + TRACE_EVENT(cfg80211_ch_switch_notify, TP_PROTO(struct net_device *netdev, struct cfg80211_chan_def *chandef), @@ -2067,6 +2082,36 @@ TRACE_EVENT(cfg80211_ch_switch_notify, NETDEV_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(cfg80211_radar_event, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, CHAN_DEF_PR_ARG) +); + +TRACE_EVENT(cfg80211_cac_event, + TP_PROTO(struct net_device *netdev, enum nl80211_radar_event evt), + TP_ARGS(netdev, evt), + TP_STRUCT__entry( + NETDEV_ENTRY + __field(enum nl80211_radar_event, evt) + ), + TP_fast_assign( + NETDEV_ASSIGN; + __entry->evt = evt; + ), + TP_printk(NETDEV_PR_FMT ", event: %d", + NETDEV_PR_ARG, __entry->evt) +); + DECLARE_EVENT_CLASS(cfg80211_rx_evt, TP_PROTO(struct net_device *netdev, const u8 *addr), TP_ARGS(netdev, addr), -- cgit v0.10.2 From 164eb02d070af987890e1db1c12b8ae0394b19f7 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:20 +0100 Subject: mac80211: add radar detection command/event Add command to trigger radar detection in the driver/FW. Once radar detection is started it should continuously monitor for radars as long as the channel active. If radar is detected usermode notified with 'radar detected' event. Scanning and remain on channel functionality must be disabled while doing radar detection/scanning, and vice versa. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0eaa909..7241962 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -147,10 +147,12 @@ struct ieee80211_low_level_stats { * enum ieee80211_chanctx_change - change flag for channel context * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed + * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), + IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), }; /** @@ -165,6 +167,7 @@ enum ieee80211_chanctx_change { * @rx_chains_dynamic: The number of RX chains that must be enabled * after RTS/CTS handshake to receive SMPS MIMO transmissions; * this will always be >= @rx_chains_static. + * @radar_enabled: whether radar detection is enabled on this channel. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ @@ -173,6 +176,8 @@ struct ieee80211_chanctx_conf { u8 rx_chains_static, rx_chains_dynamic; + bool radar_enabled; + u8 drv_priv[0] __aligned(sizeof(void *)); }; @@ -967,6 +972,7 @@ enum ieee80211_smps_mode { * * @channel: the channel to tune to * @channel_type: the channel (HT) type + * @radar_enabled: whether radar detection is enabled * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, @@ -993,6 +999,7 @@ struct ieee80211_conf { struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; + bool radar_enabled; enum ieee80211_smps_mode smps_mode; }; @@ -3945,6 +3952,13 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, gfp_t gfp); /** + * ieee80211_radar_detected - inform that a radar was detected + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + */ +void ieee80211_radar_detected(struct ieee80211_hw *hw); + +/** * ieee80211_chswitch_done - Complete channel switch process * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @success: make the channel switch successful or not diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e3dec80..0969978 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -928,6 +928,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: make hostapd tell us what it wants */ sdata->smps_mode = IEEE80211_SMPS_OFF; sdata->needed_rx_chains = sdata->local->rx_chains; + sdata->radar_required = params->radar_required; err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, IEEE80211_CHANCTX_SHARED); @@ -2395,7 +2396,8 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, INIT_LIST_HEAD(&roc->dependents); /* if there's one pending or we're scanning, queue this one */ - if (!list_empty(&local->roc_list) || local->scanning) + if (!list_empty(&local->roc_list) || + local->scanning || local->radar_detect_enabled) goto out_check_combine; /* if not HW assist, just queue & schedule work */ @@ -2645,6 +2647,37 @@ static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, return ieee80211_cancel_roc(local, cookie, false); } +static int ieee80211_start_radar_detection(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + unsigned long timeout; + int err; + + if (!list_empty(&local->roc_list) || local->scanning) + return -EBUSY; + + /* whatever, but channel contexts should not complain about that one */ + sdata->smps_mode = IEEE80211_SMPS_OFF; + sdata->needed_rx_chains = local->rx_chains; + sdata->radar_required = true; + + mutex_lock(&local->iflist_mtx); + err = ieee80211_vif_use_channel(sdata, chandef, + IEEE80211_CHANCTX_SHARED); + mutex_unlock(&local->iflist_mtx); + if (err) + return err; + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + ieee80211_queue_delayed_work(&sdata->local->hw, + &sdata->dfs_cac_timer_work, timeout); + + return 0; +} + static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, unsigned int wait, const u8 *buf, size_t len, @@ -3350,4 +3383,5 @@ struct cfg80211_ops mac80211_config_ops = { .get_et_stats = ieee80211_get_et_stats, .get_et_strings = ieee80211_get_et_strings, .get_channel = ieee80211_cfg_get_channel, + .start_radar_detection = ieee80211_start_radar_detection, }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 038f249..2e6faed 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -193,6 +193,7 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, if (ctx->refcount > 0) { ieee80211_recalc_chanctx_chantype(sdata->local, ctx); ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); } } @@ -216,6 +217,37 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ieee80211_free_chanctx(local, ctx); } +void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, + struct ieee80211_chanctx *chanctx) +{ + struct ieee80211_sub_if_data *sdata; + bool radar_enabled = false; + + lockdep_assert_held(&local->chanctx_mtx); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (sdata->radar_required) { + radar_enabled = true; + break; + } + } + rcu_read_unlock(); + + if (radar_enabled == chanctx->conf.radar_enabled) + return; + + chanctx->conf.radar_enabled = radar_enabled; + local->radar_detect_enabled = chanctx->conf.radar_enabled; + + if (!local->use_chanctx) { + local->hw.conf.radar_enabled = chanctx->conf.radar_enabled; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + } + + drv_change_chanctx(local, chanctx, IEEE80211_CHANCTX_CHANGE_RADAR); +} + void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx) { @@ -331,6 +363,7 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, } ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); return ret; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 76cdcfc..0e0a977 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -722,6 +722,9 @@ struct ieee80211_sub_if_data { int user_power_level; /* in dBm */ int ap_power_level; /* in dBm */ + bool radar_required; + struct delayed_work dfs_cac_timer_work; + /* * AP this belongs to: self in AP mode and * corresponding AP in VLAN mode, NULL for @@ -942,6 +945,10 @@ struct ieee80211_local { /* wowlan is enabled -- don't reconfig on resume */ bool wowlan; + /* DFS/radar detection is enabled */ + bool radar_detect_enabled; + struct work_struct radar_detected_work; + /* number of RX chains the hardware has */ u8 rx_chains; @@ -1606,6 +1613,13 @@ void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); +void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, + struct ieee80211_chanctx *chanctx); + +void ieee80211_dfs_cac_timer(unsigned long data); +void ieee80211_dfs_cac_timer_work(struct work_struct *work); +void ieee80211_dfs_cac_cancel(struct ieee80211_local *local); +void ieee80211_dfs_radar_detected_work(struct work_struct *work); #ifdef CONFIG_MAC80211_NOINLINE #define debug_noinline noinline diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 40ff030..e9223ce 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -749,6 +749,16 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->recalc_smps); + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + mutex_lock(&local->iflist_mtx); + ieee80211_vif_release_channel(sdata); + mutex_unlock(&local->iflist_mtx); + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + /* APs need special treatment */ if (sdata->vif.type == NL80211_IFTYPE_AP) { struct ieee80211_sub_if_data *vlan, *tmpsdata; @@ -1513,6 +1523,8 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, spin_lock_init(&sdata->cleanup_stations_lock); INIT_LIST_HEAD(&sdata->cleanup_stations); INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk); + INIT_DELAYED_WORK(&sdata->dfs_cac_timer_work, + ieee80211_dfs_cac_timer_work); for (i = 0; i < IEEE80211_NUM_BANDS; i++) { struct ieee80211_supported_band *sband; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 38b3468..9cdbc77 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -621,6 +621,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, INIT_WORK(&local->restart_work, ieee80211_restart_work); + INIT_WORK(&local->radar_detected_work, + ieee80211_dfs_radar_detected_work); + INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); local->smps_mode = IEEE80211_SMPS_OFF; @@ -713,6 +716,16 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)) return -EINVAL; + + /* DFS currently not supported with channel context drivers */ + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->radar_detect_widths) + return -EINVAL; + } } /* Only HW csum features are currently compatible with mac80211 */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index efb2276..7d4cde7 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1212,6 +1212,19 @@ void ieee80211_dynamic_ps_timer(unsigned long data) ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); } +void ieee80211_dfs_cac_timer_work(struct work_struct *work) +{ + struct delayed_work *delayed_work = + container_of(work, struct delayed_work, work); + struct ieee80211_sub_if_data *sdata = + container_of(delayed_work, struct ieee80211_sub_if_data, + dfs_cac_timer_work); + + ieee80211_vif_release_channel(sdata); + + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL); +} + /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 53801d2..d0275f3 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -38,6 +38,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) ieee80211_scan_cancel(local); + ieee80211_dfs_cac_cancel(local); + if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 6d0b89e..43a45cf 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -351,6 +351,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) static bool ieee80211_can_scan(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { + if (local->radar_detect_enabled) + return false; + if (!list_empty(&local->roc_list)) return false; diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 0bdd7ae..1183c4a 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1862,6 +1862,25 @@ TRACE_EVENT(drv_set_default_unicast_key, LOCAL_PR_ARG, VIF_PR_ARG, __entry->key_idx) ); +TRACE_EVENT(api_radar_detected, + TP_PROTO(struct ieee80211_local *local), + + TP_ARGS(local), + + TP_STRUCT__entry( + LOCAL_ENTRY + ), + + TP_fast_assign( + LOCAL_ASSIGN; + ), + + TP_printk( + LOCAL_PR_FMT " radar detected", + LOCAL_PR_ARG + ) +); + #ifdef CONFIG_MAC80211_MESSAGE_TRACING #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 6cb71a3..218cb52 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2133,3 +2133,49 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, return ts; } + +void ieee80211_dfs_cac_cancel(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + + mutex_lock(&local->iflist_mtx); + list_for_each_entry(sdata, &local->interfaces, list) { + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + ieee80211_vif_release_channel(sdata); + cfg80211_cac_event(sdata->dev, + NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + } + mutex_unlock(&local->iflist_mtx); +} + +void ieee80211_dfs_radar_detected_work(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, radar_detected_work); + struct cfg80211_chan_def chandef; + + ieee80211_dfs_cac_cancel(local); + + if (local->use_chanctx) + /* currently not handled */ + WARN_ON(1); + else { + cfg80211_chandef_create(&chandef, local->hw.conf.channel, + local->hw.conf.channel_type); + cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); + } +} + +void ieee80211_radar_detected(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + trace_api_radar_detected(local); + + ieee80211_queue_work(hw, &local->radar_detected_work); +} +EXPORT_SYMBOL(ieee80211_radar_detected); -- cgit v0.10.2 From 397a7a24ef8c2967a3e8090013f9c54714110c48 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 13 Feb 2013 16:49:15 +0100 Subject: mac80211: free ps->bc_buf skbs on vlan device stop When the vlan device is removed, ps->bc_buf processing can no longer send its frames. Signed-off-by: Michael Braun Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index e9223ce..86c8308 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -680,6 +680,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, *tmp; u32 hw_reconf_flags = 0; int i, flushed; + struct ps_data *ps; clear_bit(SDATA_STATE_RUNNING, &sdata->state); @@ -768,6 +769,19 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, u.vlan.list) dev_close(vlan->dev); WARN_ON(!list_empty(&sdata->u.ap.vlans)); + } else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + /* remove all packets in parent bc_buf pointing to this dev */ + ps = &sdata->bss->ps; + + spin_lock_irqsave(&ps->bc_buf.lock, flags); + skb_queue_walk_safe(&ps->bc_buf, skb, tmp) { + if (skb->dev == sdata->dev) { + __skb_unlink(skb, &ps->bc_buf); + local->total_ps_buffered--; + ieee80211_free_txskb(&local->hw, skb); + } + } + spin_unlock_irqrestore(&ps->bc_buf.lock, flags); } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { ieee80211_mgd_stop(sdata); } -- cgit v0.10.2 From de74a1d9032f4d37ea453ad2a647e1aff4cd2591 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 13 Feb 2013 16:49:16 +0100 Subject: mac80211: fix WPA with VLAN on AP side with ps-sta When sending a broadcast while at least on of the connected stations is sleeping, it gets queued and send after a DTIM beacon is sent. If the packet was to be sent on a vlan interface, the vif used for dequeing from the per-bss queue does not hold the per-vlan sdata. The correct sdata is required to use the correct per-vlan broadcast/multicast key. This patch fixes this by restoring the per-vlan sdata using the skb->dev entry. Signed-off-by: Michael Braun Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f476aa6..71385bf 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2785,6 +2785,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, cpu_to_le16(IEEE80211_FCTL_MOREDATA); } + sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); if (!ieee80211_tx_prepare(sdata, &tx, skb)) break; dev_kfree_skb_any(skb); -- cgit v0.10.2 From 39886b618aba3c39e650c191d601e26ec581ce0f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 13 Feb 2013 12:14:19 -0800 Subject: mac80211: consolidate MBSS change notification A few mesh utility functions will call ieee80211_bss_info_change_notify(), and then the caller might notify the driver of the same change again. Avoid this redundancy by propagating the BSS changes and generally calling bss_info_change_notify() once per change. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0969978..f4db306 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1262,9 +1262,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH + u32 changed = 0; if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { - u32 changed = 0; - switch (params->plink_state) { case NL80211_PLINK_ESTAB: if (sta->plink_state != NL80211_PLINK_ESTAB) @@ -1273,8 +1272,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->plink_state = params->plink_state; ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, - sdata->u.mesh.mshcfg.power_mode); + changed |= ieee80211_mps_set_sta_local_pm(sta, + sdata->u.mesh.mshcfg.power_mode); break; case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: @@ -1288,26 +1287,29 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->plink_state = params->plink_state; ieee80211_mps_sta_status_update(sta); - ieee80211_mps_local_status_update(sdata); + changed |= + ieee80211_mps_local_status_update(sdata); break; default: /* nothing */ break; } - ieee80211_bss_info_change_notify(sdata, changed); } else { switch (params->plink_action) { case PLINK_ACTION_OPEN: - mesh_plink_open(sta); + changed |= mesh_plink_open(sta); break; case PLINK_ACTION_BLOCK: - mesh_plink_block(sta); + changed |= mesh_plink_block(sta); break; } } if (params->local_pm) - ieee80211_mps_set_sta_local_pm(sta, params->local_pm); + changed |= + ieee80211_mps_set_sta_local_pm(sta, + params->local_pm); + ieee80211_bss_info_change_notify(sdata, changed); #endif } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 2bf0158..0adec3d 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -675,7 +675,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); ieee80211_bss_info_change_notify(sdata, changed); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 3b9d862..7ad035f 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -245,9 +245,9 @@ void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); /* mesh power save */ -void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); -void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, - enum nl80211_mesh_power_mode pm); +u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); +u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm); void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_hdr *hdr); @@ -289,8 +289,8 @@ bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); u32 mesh_plink_deactivate(struct sta_info *sta); -int mesh_plink_open(struct sta_info *sta); -void mesh_plink_block(struct sta_info *sta); +u32 mesh_plink_open(struct sta_info *sta); +u32 mesh_plink_block(struct sta_info *sta); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 56c9b31..a4c7a7e 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -202,7 +202,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) mesh_path_flush_by_nexthop(sta); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); return changed; } @@ -494,6 +494,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *elems) { struct sta_info *sta; + u32 changed = 0; sta = mesh_sta_info_get(sdata, hw_addr, elems); if (!sta) @@ -504,11 +505,12 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, sdata->u.mesh.accepting_plinks && sdata->u.mesh.mshcfg.auto_open_plinks && rssi_threshold_check(sta, sdata)) - mesh_plink_open(sta); + changed = mesh_plink_open(sta); ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); + ieee80211_bss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -621,13 +623,14 @@ static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout) add_timer(&sta->plink_timer); } -int mesh_plink_open(struct sta_info *sta) +u32 mesh_plink_open(struct sta_info *sta) { __le16 llid; struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; if (!test_sta_flag(sta, WLAN_STA_AUTH)) - return -EPERM; + return 0; spin_lock_bh(&sta->lock); get_random_bytes(&llid, 2); @@ -635,7 +638,7 @@ int mesh_plink_open(struct sta_info *sta) if (sta->plink_state != NL80211_PLINK_LISTEN && sta->plink_state != NL80211_PLINK_BLOCKED) { spin_unlock_bh(&sta->lock); - return -EBUSY; + return 0; } sta->plink_state = NL80211_PLINK_OPN_SNT; mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout); @@ -645,15 +648,15 @@ int mesh_plink_open(struct sta_info *sta) sta->sta.addr); /* set the non-peer mode to active during peering */ - ieee80211_mps_local_status_update(sdata); + changed = ieee80211_mps_local_status_update(sdata); - return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, - sta->sta.addr, llid, 0, 0); + mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, + sta->sta.addr, llid, 0, 0); + return changed; } -void mesh_plink_block(struct sta_info *sta) +u32 mesh_plink_block(struct sta_info *sta) { - struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; spin_lock_bh(&sta->lock); @@ -661,7 +664,7 @@ void mesh_plink_block(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } @@ -882,7 +885,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mshcfg->dot11MeshRetryTimeout); /* set the non-peer mode to active during peering */ - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, @@ -978,7 +981,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, + changed |= ieee80211_mps_set_sta_local_pm(sta, mshcfg->power_mode); break; default: @@ -1020,8 +1023,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m WLAN_SP_MESH_PEERING_CONFIRM, sta->sta.addr, llid, plid, 0); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, - mshcfg->power_mode); + changed |= ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c index b677962..3b7bfc0 100644 --- a/net/mac80211/mesh_ps.c +++ b/net/mac80211/mesh_ps.c @@ -74,14 +74,17 @@ static void mps_qos_null_tx(struct sta_info *sta) * @sdata: local mesh subif * * sets the non-peer power mode and triggers the driver PS (re-)configuration + * Return BSS_CHANGED_BEACON if a beacon update is necessary. */ -void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) +u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct sta_info *sta; bool peering = false; int light_sleep_cnt = 0; int deep_sleep_cnt = 0; + u32 changed = 0; + enum nl80211_mesh_power_mode nonpeer_pm; rcu_read_lock(); list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { @@ -115,17 +118,26 @@ void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) */ if (peering) { mps_dbg(sdata, "setting non-peer PM to active for peering\n"); - ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; + nonpeer_pm = NL80211_MESH_POWER_ACTIVE; } else if (light_sleep_cnt || deep_sleep_cnt) { mps_dbg(sdata, "setting non-peer PM to deep sleep\n"); - ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; + nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; } else { mps_dbg(sdata, "setting non-peer PM to user value\n"); - ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode; + nonpeer_pm = ifmsh->mshcfg.power_mode; } + /* need update if sleep counts move between 0 and non-zero */ + if (ifmsh->nonpeer_pm != nonpeer_pm || + !ifmsh->ps_peers_light_sleep != !light_sleep_cnt || + !ifmsh->ps_peers_deep_sleep != !deep_sleep_cnt) + changed = BSS_CHANGED_BEACON; + + ifmsh->nonpeer_pm = nonpeer_pm; ifmsh->ps_peers_light_sleep = light_sleep_cnt; ifmsh->ps_peers_deep_sleep = deep_sleep_cnt; + + return changed; } /** @@ -133,9 +145,10 @@ void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) * * @sta: mesh STA * @pm: the power mode to set + * Return BSS_CHANGED_BEACON if a beacon update is in order. */ -void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, - enum nl80211_mesh_power_mode pm) +u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm) { struct ieee80211_sub_if_data *sdata = sta->sdata; @@ -151,7 +164,7 @@ void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, if (sta->plink_state == NL80211_PLINK_ESTAB) mps_qos_null_tx(sta); - ieee80211_mps_local_status_update(sdata); + return ieee80211_mps_local_status_update(sdata); } /** -- cgit v0.10.2 From cab1c7fd8024ce896119535b5b067224b0b699aa Mon Sep 17 00:00:00 2001 From: Wojciech Dubowik Date: Thu, 14 Feb 2013 14:08:37 +0100 Subject: mac80211: fix ieee80211_sta_tx_notify for nullfunc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Function ieee80211_sta_reset_conn_monitor has been resetting probe_send_count too early and nullfunc check was never called after succesfull ack. Reported-by: Magnus Cederlöf Tested-by: Magnus Cederlöf Signed-off-by: Wojciech Dubowik Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7d4cde7..c156573 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1637,17 +1637,18 @@ void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, if (!ieee80211_is_data(hdr->frame_control)) return; - if (ack) - ieee80211_sta_reset_conn_monitor(sdata); - if (ieee80211_is_nullfunc(hdr->frame_control) && sdata->u.mgd.probe_send_count > 0) { if (ack) - sdata->u.mgd.probe_send_count = 0; + ieee80211_sta_reset_conn_monitor(sdata); else sdata->u.mgd.nullfunc_failed = true; ieee80211_queue_work(&sdata->local->hw, &sdata->work); + return; } + + if (ack) + ieee80211_sta_reset_conn_monitor(sdata); } static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) -- cgit v0.10.2 From 89afe614c0c737fd40eda1f8c8ef686246cf3cb6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 15:39:57 +0100 Subject: mac80211: fix auth/assoc timeout handling In my commit 1672c0e31917f49d31d30d79067103432bc20cc7 ("mac80211: start auth/assoc timeout on frame status") I broke auth/assoc timeout handling: in case we wait for the TX status, it now leaves the timeout field set to 0, which is a valid time and can compare as being before now ("jiffies"). Thus, if the work struct runs for some other reason, the auth/assoc is treated as having timed out. Fix this by introducing a separate "timeout_started" variable that tracks whether the timeout has started and is checked before timing out. Additionally, for proper TX status handling the change requires that the skb->dev pointer is set up for all the frames, so set it up for all frames in mac80211. Reported-by: Wojciech Dubowik Tested-by: Wojciech Dubowik Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0e0a977..52bf954 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -343,6 +343,7 @@ struct ieee80211_mgd_auth_data { u8 key[WLAN_KEY_LEN_WEP104]; u8 key_len, key_idx; bool done; + bool timeout_started; u16 sae_trans, sae_status; size_t data_len; @@ -364,6 +365,7 @@ struct ieee80211_mgd_assoc_data { bool wmm, uapsd; bool have_beacon, need_beacon; bool synced; + bool timeout_started; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c156573..a7fb276 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2000,6 +2000,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "authenticated\n"); ifmgd->auth_data->done = true; ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, ifmgd->auth_data->timeout); if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && @@ -2334,6 +2335,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", mgmt->sa, tu, ms); assoc_data->timeout = jiffies + msecs_to_jiffies(ms); + assoc_data->timeout_started = true; if (ms > IEEE80211_ASSOC_TIMEOUT) run_again(ifmgd, assoc_data->timeout); return RX_MGMT_NONE; @@ -2457,6 +2459,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "direct probe responded\n"); ifmgd->auth_data->tries = 0; ifmgd->auth_data->timeout = jiffies; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, ifmgd->auth_data->timeout); } } @@ -2542,6 +2545,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; + ifmgd->assoc_data->timeout_started = true; run_again(ifmgd, ifmgd->assoc_data->timeout); return; } @@ -2934,7 +2938,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, auth_data->timeout); + } else { + auth_data->timeout_started = false; } return 0; @@ -2968,7 +2975,10 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; + assoc_data->timeout_started = true; run_again(&sdata->u.mgd, assoc_data->timeout); + } else { + assoc_data->timeout_started = false; } return 0; @@ -3007,6 +3017,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else { ifmgd->auth_data->timeout = jiffies - 1; } + ifmgd->auth_data->timeout_started = true; } else if (ifmgd->assoc_data && (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))) { @@ -3017,10 +3028,11 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else { ifmgd->assoc_data->timeout = jiffies - 1; } + ifmgd->assoc_data->timeout_started = true; } } - if (ifmgd->auth_data && + if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && time_after(jiffies, ifmgd->auth_data->timeout)) { if (ifmgd->auth_data->done) { /* @@ -3039,10 +3051,10 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) cfg80211_send_auth_timeout(sdata->dev, bssid); mutex_lock(&ifmgd->mtx); } - } else if (ifmgd->auth_data) + } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) run_again(ifmgd, ifmgd->auth_data->timeout); - if (ifmgd->assoc_data && + if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && time_after(jiffies, ifmgd->assoc_data->timeout)) { if ((ifmgd->assoc_data->need_beacon && !ifmgd->assoc_data->have_beacon) || @@ -3057,7 +3069,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) cfg80211_send_assoc_timeout(sdata->dev, bssid); mutex_lock(&ifmgd->mtx); } - } else if (ifmgd->assoc_data) + } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) run_again(ifmgd, ifmgd->assoc_data->timeout); if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | @@ -4032,6 +4044,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "waiting for beacon from %pM\n", ifmgd->bssid); assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + assoc_data->timeout_started = true; assoc_data->need_beacon = true; } else if (beacon_ies) { const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, @@ -4047,6 +4060,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; @@ -4056,6 +4070,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } } else { assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; } rcu_read_unlock(); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 19db20a..fb3b586 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1120,6 +1120,8 @@ static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, drv_allow_buffered_frames(local, sta, BIT(tid), 1, reason, false); + skb->dev = sdata->dev; + rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 71385bf..f4c89f5 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2818,6 +2818,8 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, skb_set_queue_mapping(skb, ac); skb->priority = tid; + skb->dev = sdata->dev; + /* * The other path calling ieee80211_xmit is from the tasklet, * and while we can handle concurrent transmissions locking -- cgit v0.10.2 From 5bbe754d9ecc4a09994ecd0cf3b167224e114da5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 13:50:51 +0100 Subject: mac80211: don't call bss_info_changed on p2p-device/monitor Since the idle decision rework, mac80211 started calling bss_info_changed() for the driver's monitor interface, which causes a crash for iwlwifi, but drivers generally don't expect this to happen. Therefore, avoid it. While at it, also prevent calling it in such cases and only print a warning. For the P2P Device interface the idle will no longer be called (no channel context), so also prevent that and warn on it. Reported-by: Chaitanya Signed-off-by: Johannes Berg diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 2e6faed..d91ccfc 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -137,7 +137,10 @@ static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_txpower(sdata); sdata->vif.bss_conf.idle = false; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && + sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); return 0; } @@ -186,7 +189,10 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); sdata->vif.bss_conf.idle = true; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && + sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); drv_unassign_vif_chanctx(local, sdata, ctx); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 2b08b99..ee56d07 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -207,13 +207,16 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, { might_sleep(); - WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED) && - sdata->vif.type != NL80211_IFTYPE_AP && - sdata->vif.type != NL80211_IFTYPE_ADHOC && - sdata->vif.type != NL80211_IFTYPE_MESH_POINT); - WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE && - changed & ~BSS_CHANGED_IDLE); + if (WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED) && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT)) + return; + + if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE || + sdata->vif.type == NL80211_IFTYPE_MONITOR)) + return; check_sdata_in_driver(sdata); -- cgit v0.10.2 From 5b36ebd8249f403c7edf7cf68d68e9a0d0f55243 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 14:21:45 +0100 Subject: mac80211: always unblock CSA queue stop when disconnecting In some cases when disconnecting after (or during?) CSA the queues might not recover, and then the only way to recover is reloading the module. Fix this by always unblocking the queue CSA reason when disconnecting. Cc: stable@vger.kernel.org Reported-by: Jan-Michael Brummer Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a7fb276..99be3b6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1819,6 +1819,8 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, true, frame_buf); ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; + ieee80211_wake_queues_by_reason(&sdata->local->hw, + IEEE80211_QUEUE_STOP_REASON_CSA); mutex_unlock(&ifmgd->mtx); /* @@ -1859,8 +1861,6 @@ static void ieee80211_csa_connection_drop_work(struct work_struct *work) container_of(work, struct ieee80211_sub_if_data, u.mgd.csa_connection_drop_work); - ieee80211_wake_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); __ieee80211_disconnect(sdata); } -- cgit v0.10.2 From 441a33baf1805861354fb9e3149c000311b6996f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 16:27:04 +0100 Subject: mac80211: don't pick up WPA vendor IE There's no use for it, WPA is entirely handled in wpa_supplicant in userspace, so don't pick the IE. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 52bf954..8f95644 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1175,7 +1175,6 @@ struct ieee802_11_elems { struct ieee80211_tim_ie *tim; u8 *ibss_params; u8 *challenge; - u8 *wpa; u8 *rsn; u8 *erp_info; u8 *ext_supp_rates; @@ -1208,7 +1207,6 @@ struct ieee802_11_elems { u8 tim_len; u8 ibss_params_len; u8 challenge_len; - u8 wpa_len; u8 rsn_len; u8 erp_info_len; u8 ext_supp_rates_len; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 218cb52..b231bc2 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -739,11 +739,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, if (calc_crc) crc = crc32_be(crc, pos - 2, elen + 2); - if (pos[3] == 1) { - /* OUI Type 1 - WPA IE */ - elems->wpa = pos; - elems->wpa_len = elen; - } else if (elen >= 5 && pos[3] == 2) { + if (elen >= 5 && pos[3] == 2) { /* OUI Type 2 - WMM IE */ if (pos[4] == 0) { elems->wmm_info = pos; -- cgit v0.10.2 From 65f704a52ec5db356c58f8ba53a31d3aef02737f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 17:39:53 +0100 Subject: mac80211: use spin_lock_bh() for tim_lock There's no need to use _irqsave() as the lock is never used in interrupt context. This also fixes a problem in the iwlwifi MVM driver that calls spin_unlock_bh() within its set_tim() callback. Signed-off-by: Johannes Berg diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index fb3b586..0794b90 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -571,7 +571,6 @@ void sta_info_recalc_tim(struct sta_info *sta) { struct ieee80211_local *local = sta->local; struct ps_data *ps; - unsigned long flags; bool indicate_tim = false; u8 ignore_for_tim = sta->sta.uapsd_queues; int ac; @@ -628,7 +627,7 @@ void sta_info_recalc_tim(struct sta_info *sta) } done: - spin_lock_irqsave(&local->tim_lock, flags); + spin_lock_bh(&local->tim_lock); if (indicate_tim) __bss_tim_set(ps->tim, id); @@ -641,7 +640,7 @@ void sta_info_recalc_tim(struct sta_info *sta) local->tim_in_locked_section = false; } - spin_unlock_irqrestore(&local->tim_lock, flags); + spin_unlock_bh(&local->tim_lock); } static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f4c89f5..7d8c629 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2364,11 +2364,9 @@ static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, if (local->tim_in_locked_section) { __ieee80211_beacon_add_tim(sdata, ps, skb); } else { - unsigned long flags; - - spin_lock_irqsave(&local->tim_lock, flags); + spin_lock(&local->tim_lock); __ieee80211_beacon_add_tim(sdata, ps, skb); - spin_unlock_irqrestore(&local->tim_lock, flags); + spin_unlock(&local->tim_lock); } return 0; -- cgit v0.10.2 From 03395003bf8ac813b1a0ac9299b3496484caf228 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 18:03:00 +0100 Subject: mac80211: use spin_lock_bh() for TKIP lock Since no driver calls the TKIP functions from interrupt context, there's no need to use spin_lock_irqsave(). Just use spin_lock_bh() (and spin_lock() in the TX path where we're in a BH or they're already disabled.) Signed-off-by: Johannes Berg diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index 57e14d5..3ed801d 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -177,12 +177,11 @@ void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf, struct ieee80211_key *key = (struct ieee80211_key *) container_of(keyconf, struct ieee80211_key, conf); struct tkip_ctx *ctx = &key->u.tkip.tx; - unsigned long flags; - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock_bh(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); memcpy(p1k, ctx->p1k, sizeof(ctx->p1k)); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock_bh(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p1k_iv); @@ -208,12 +207,11 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control); u32 iv32 = get_unaligned_le32(&data[4]); u16 iv16 = data[2] | (data[0] << 8); - unsigned long flags; - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock_bh(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); tkip_mixing_phase2(tk, ctx, iv16, p2k); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock_bh(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p2k); diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index c175ee8..c7c6d64 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -181,7 +181,6 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_key *key = tx->key; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - unsigned long flags; unsigned int hdrlen; int len, tail; u8 *pos; @@ -216,12 +215,12 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) return 0; /* Increase IV for the frame */ - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock(&key->u.tkip.txlock); key->u.tkip.tx.iv16++; if (key->u.tkip.tx.iv16 == 0) key->u.tkip.tx.iv32++; pos = ieee80211_tkip_add_iv(pos, key); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock(&key->u.tkip.txlock); /* hwaccel - with software IV */ if (info->control.hw_key) -- cgit v0.10.2 From 4a34215ef7487b1cbd783e7cc485eb03de893bd0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:58:58 +0100 Subject: mac80211: pass station to ieee80211_vht_cap_ie_to_sta_vht_cap Like with HT, make things a bit simpler in future patches by passing the station to ieee80211_vht_cap_ie_to_sta_vht_cap() instead of the vht_cap pointer. Also disable VHT here if HT isn't supported. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9b17930..9c9496d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1257,8 +1257,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - params->vht_capa, - &sta->sta.vht_cap); + params->vht_capa, sta); if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8f95644..9206d43 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1430,7 +1430,8 @@ u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs); void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, - struct ieee80211_sta_vht_cap *vht_cap); + struct sta_info *sta); + /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ac1374a..58b6e67 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2217,8 +2217,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - elems.vht_cap_elem, - &sta->sta.vht_cap); + elems.vht_cap_elem, sta); rate_control_rate_init(sta); diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index f311388..1606aa1 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -15,13 +15,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, - struct ieee80211_sta_vht_cap *vht_cap) + struct sta_info *sta) { - if (WARN_ON_ONCE(!vht_cap)) - return; + struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; memset(vht_cap, 0, sizeof(*vht_cap)); + if (!sta->sta.ht_cap.ht_supported) + return; + if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; -- cgit v0.10.2 From e1a0c6b3a4b27ed5f21291d0bbee2167ec201ef5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:47:44 +0100 Subject: mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 714558d..54150b6 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1204,7 +1204,7 @@ static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta) caps |= WLAN_RC_TS_FLAG | WLAN_RC_DS_FLAG; else if (sta->ht_cap.mcs.rx_mask[1]) caps |= WLAN_RC_DS_FLAG; - if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { caps |= WLAN_RC_40_FLAG; if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) caps |= WLAN_RC_SGI_FLAG; diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index f41ae79..41ec27c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -338,7 +338,7 @@ int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap); + struct ieee80211_sta *sta); static inline int iwl_sta_id(struct ieee80211_sta *sta) { diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index a131227..b25de02 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1305,7 +1305,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1361,7 +1361,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1410,7 +1410,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index ab76804..6deab38 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -173,7 +173,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap) + struct ieee80211_sta *sta) { if (!ctx->ht.enabled || !ctx->ht.is_40mhz) return false; @@ -183,20 +183,11 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, return false; #endif - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) + /* special case for RXON */ + if (!sta) return true; - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, @@ -246,7 +237,7 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, *flags |= cpu_to_le32( (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) *flags |= STA_FLG_HT40_EN_MSK; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 60a4291..8ba36e5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1209,23 +1209,9 @@ static s32 rs_get_best_rate(struct iwl_mvm *mvm, return new_rate; } -static bool iwl_is_ht40_tx_allowed(struct iwl_mvm *mvm, - struct ieee80211_sta_ht_cap *ht_cap) +static bool iwl_is_ht40_tx_allowed(struct ieee80211_sta *sta) { - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) - return true; - - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } /* @@ -1258,7 +1244,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1311,7 +1297,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1356,7 +1342,7 @@ static int rs_switch_to_siso(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 4494d13..84ea04d 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -523,8 +523,8 @@ static void _rtl_query_shortgi(struct ieee80211_hw *hw, if (mac->opmode == NL80211_IFTYPE_STATION) bw_40 = mac->bw_40; else if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) - bw_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + mac->opmode == NL80211_IFTYPE_ADHOC) + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; if (bw_40 && sgi_40) tcb_desc->use_shortgi = true; @@ -634,8 +634,7 @@ static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw, return; if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { - if (!(sta->ht_cap.ht_supported) || - !(sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + if (sta->bandwidth == IEEE80211_STA_RX_BW_20) return; } else if (mac->opmode == NL80211_IFTYPE_STATION) { if (!mac->bw_40 || !(sta->ht_cap.ht_supported)) diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c..c12a866 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -116,9 +116,8 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv, if (txrc->short_preamble) rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) { - if (sta && (sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + mac->opmode == NL80211_IFTYPE_ADHOC) { + if (sta && (sta->bandwidth >= IEEE80211_STA_RX_BW_40)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; } else { if (mac->bw_40) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index d1f34f6..1b65db7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -1846,9 +1846,9 @@ static void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; - u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1 : 0; diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index da0e902..b9b1a6e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -626,8 +626,7 @@ void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index f4051f4..aa5b425 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -1970,8 +1970,7 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index cdb570f..941080e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -574,8 +574,7 @@ void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc); diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 28526a7..084e777 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -2085,8 +2085,7 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index = 0; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index f8431a3..7b0a2e7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -621,8 +621,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c index 1498048..9a0c71c 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c @@ -1866,8 +1866,7 @@ static void rtl8723ae_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index b1fd2b3..ac08129 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -395,8 +395,7 @@ void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a10b7a7..da3ef1b 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1374,7 +1374,7 @@ static void wl18xx_sta_rc_update(struct wl1271 *wl, struct ieee80211_sta *sta, u32 changed) { - bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bool wide = sta->bandwidth >= IEEE80211_STA_RX_BW_40; wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7241962..1e3b4f7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1197,6 +1197,24 @@ enum ieee80211_sta_state { }; /** + * enum ieee80211_sta_rx_bandwidth - station RX bandwidth + * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz + * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz + * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz + * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz + * (including 80+80 MHz) + * + * Implementation note: 20 must be zero to be initialized + * correctly, the values must be sorted. + */ +enum ieee80211_sta_rx_bandwidth { + IEEE80211_STA_RX_BW_20 = 0, + IEEE80211_STA_RX_BW_40, + IEEE80211_STA_RX_BW_80, + IEEE80211_STA_RX_BW_160, +}; + +/** * struct ieee80211_sta - station table entry * * A station table entry represents a station we are possibly @@ -1218,6 +1236,7 @@ enum ieee80211_sta_state { * @uapsd_queues: bitmap of queues configured for uapsd. Only valid * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. + * @bandwidth: current bandwidth the station can receive with */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1228,6 +1247,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -2086,7 +2106,9 @@ enum ieee80211_frame_release_type { * enum ieee80211_rate_control_changed - flags to indicate what changed * * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit - * to this station changed. + * to this station changed. The actual bandwidth is in the station + * information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40 + * flag changes, for HT and VHT the bandwidth field changes. * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed. * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9c9496d..c3869ba 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1252,8 +1252,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->ht_capa) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - params->ht_capa, - &sta->sta.ht_cap); + params->ht_capa, sta); if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 9e7560b..a64b4f0 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -37,6 +37,9 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, u8 *smask = (u8 *)(&sdata->u.mgd.ht_capa_mask.mcs.rx_mask); int i; + if (!ht_cap->ht_supported) + return; + if (sdata->vif.type != NL80211_IFTYPE_STATION) { /* AP interfaces call this code when adding new stations, * so just silently ignore non station interfaces. @@ -89,22 +92,23 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, } -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap) + struct sta_info *sta) { + struct ieee80211_sta_ht_cap ht_cap; u8 ampdu_info, tx_mcs_set_cap; int i, max_tx_streams; + bool changed; + enum ieee80211_sta_rx_bandwidth bw; - BUG_ON(!ht_cap); - - memset(ht_cap, 0, sizeof(*ht_cap)); + memset(&ht_cap, 0, sizeof(ht_cap)); if (!ht_cap_ie || !sband->ht_cap.ht_supported) - return; + goto apply; - ht_cap->ht_supported = true; + ht_cap.ht_supported = true; /* * The bits listed in this expression should be @@ -112,7 +116,7 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * advertises more then we can't use those thus * we mask them out. */ - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) & (sband->ht_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING | IEEE80211_HT_CAP_SUP_WIDTH_20_40 | @@ -121,44 +125,30 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_DSSSCCK40)); - /* Unset 40 MHz if we're not using a 40 MHz channel */ - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - ht_cap->cap &= ~IEEE80211_HT_CAP_SGI_40; - ht_cap->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - break; - case NL80211_CHAN_WIDTH_40: - case NL80211_CHAN_WIDTH_80: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: - break; - } - /* * The STBC bits are asymmetric -- if we don't have * TX then mask out the peer's RX and vice versa. */ if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC; if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; - ht_cap->ampdu_factor = + ht_cap.ampdu_factor = ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; - ht_cap->ampdu_density = + ht_cap.ampdu_density = (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; /* own MCS TX capabilities */ tx_mcs_set_cap = sband->ht_cap.mcs.tx_params; /* Copy peer MCS TX capabilities, the driver might need them. */ - ht_cap->mcs.tx_params = ht_cap_ie->mcs.tx_params; + ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params; /* can we TX with MCS rates? */ if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED)) - return; + goto apply; /* Counting from 0, therefore +1 */ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF) @@ -176,25 +166,53 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * - remainder are multiple spatial streams using unequal modulation */ for (i = 0; i < max_tx_streams; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION) for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE; i < IEEE80211_HT_MCS_MASK_LEN; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; /* handle MCS rate 32 too */ if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1) - ht_cap->mcs.rx_mask[32/8] |= 1; + ht_cap.mcs.rx_mask[32/8] |= 1; + apply: /* * If user has specified capability over-rides, take care * of that here. */ - ieee80211_apply_htcap_overrides(sdata, ht_cap); + ieee80211_apply_htcap_overrides(sdata, &ht_cap); + + changed = memcmp(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + memcpy(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + bw = IEEE80211_STA_RX_BW_20; + break; + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; + } + + if (bw != sta->sta.bandwidth) + changed = true; + sta->sta.bandwidth = bw; + + return changed; } void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 2db1f2b..40b71df 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -496,33 +496,26 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, if (sta && elems->ht_operation && elems->ht_cap_elem && sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) { /* we both use HT */ - struct ieee80211_sta_ht_cap sta_ht_cap_new; + struct ieee80211_ht_cap htcap_ie; struct cfg80211_chan_def chandef; ieee80211_ht_oper_to_chandef(channel, elems->ht_operation, &chandef); - ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta_ht_cap_new); + memcpy(&htcap_ie, elems->ht_cap_elem, sizeof(htcap_ie)); /* * fall back to HT20 if we don't use or use * the other extension channel */ - if (chandef.width != NL80211_CHAN_WIDTH_40 || - cfg80211_get_chandef_type(&chandef) != + if (cfg80211_get_chandef_type(&chandef) != sdata->u.ibss.channel_type) - sta_ht_cap_new.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new))) { - memcpy(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new)); - rates_updated = true; - } + htcap_ie.cap_info &= + cpu_to_le16(~IEEE80211_HT_CAP_SUP_WIDTH_20_40); + + rates_updated |= ieee80211_ht_cap_ie_to_sta_ht_cap( + sdata, sband, &htcap_ie, sta); } if (sta && rates_updated) { diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 9206d43..6b41d77 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1384,10 +1384,10 @@ void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, /* HT */ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap); + struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, u16 initiator, u16 reason_code); @@ -1431,6 +1431,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index a4c7a7e..7765139 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -373,8 +373,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (elems->ht_cap_elem && sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta->sta.ht_cap); + elems->ht_cap_elem, sta); else memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap)); @@ -383,8 +382,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (!(elems->ht_operation->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, elems->ht_operation, &chandef); if (sta->ch_width != chandef.width) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 58b6e67..be11472 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -219,19 +219,20 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - WARN_ON_ONCE(!sta); + if (WARN_ON_ONCE(!sta)) { + mutex_unlock(&local->sta_mtx); + return changed; + } - if (sta && !sta->supports_40mhz) + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (sta && (!reconfig || - (disable_40 != !(sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) { - + if (!reconfig || + disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) - sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else - sta->sta.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); rate_control_rate_update(local, sband, sta, IEEE80211_RC_BW_CHANGED); @@ -2210,10 +2211,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems.ht_cap_elem, &sta->sta.ht_cap); - - sta->supports_40mhz = - sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + elems.ht_cap_elem, sta); if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6e35dcd..6176c71 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -848,8 +848,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, IEEE80211_HT_CAP_SM_PS_SHIFT; for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { - u16 req = 0; - mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { minstrel_ht_update_cck(mp, mi, sband, sta); @@ -857,16 +855,17 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, } if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SGI_40; - else - req |= IEEE80211_HT_CAP_SGI_20; + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_40)) + continue; + } else { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_20)) + continue; + } } - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if ((sta_cap & req) != req) + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH && + sta->bandwidth < IEEE80211_STA_RX_BW_40) continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b5f1bba..8a861a5 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2410,26 +2410,21 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { struct ieee80211_supported_band *sband; u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; - bool old_40mhz, new_40mhz; + enum ieee80211_sta_rx_bandwidth new_bw; /* If it doesn't support 40 MHz it can't change ... */ - if (!rx->sta->supports_40mhz) + if (!(rx->sta->sta.ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40)) goto handled; - old_40mhz = rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - new_40mhz = chanwidth == IEEE80211_HT_CHANWIDTH_ANY; + if (chanwidth == IEEE80211_HT_CHANWIDTH_20MHZ) + new_bw = IEEE80211_STA_RX_BW_20; + else + new_bw = ieee80211_sta_cur_vht_bw(rx->sta); - if (old_40mhz == new_40mhz) + if (rx->sta->sta.bandwidth == new_bw) goto handled; - if (new_40mhz) - rx->sta->sta.ht_cap.cap |= - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - else - rx->sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - sband = rx->local->hw.wiphy->bands[status->band]; rate_control_rate_update(local, sband, rx->sta, diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 350578c..03c42f8 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -296,8 +296,6 @@ struct sta_ampdu_mlme { * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered - * @supports_40mhz: tracks whether the station advertised 40 MHz support - * as we overwrite its HT parameters with the currently used value * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { @@ -403,8 +401,6 @@ struct sta_info { unsigned int lost_packets; unsigned int beacon_loss_count; - bool supports_40mhz; - /* keep last! */ struct ieee80211_sta sta; }; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 1606aa1..0fc9a2f 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -27,6 +27,10 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; + /* A VHT STA must support 40 MHz */ + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + return; + vht_cap->vht_supported = true; vht_cap->cap = le32_to_cpu(vht_cap_ie->vht_cap_info); @@ -34,4 +38,39 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, /* Copy peer MCS info, the driver might need them. */ memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); +} + +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 cap = sta->sta.vht_cap.cap; + + if (!sta->sta.vht_cap.vht_supported) + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + + /* TODO: handle VHT opmode notification data */ + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + case NL80211_CHAN_WIDTH_160: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80P80: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80: + return IEEE80211_STA_RX_BW_80; + } } -- cgit v0.10.2 From 7bf9b9a0f0372d45b581f00173505fb76a9c5d23 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:45:41 +0100 Subject: wireless: define operating mode action frame Define the action frame format, the VHT category and its action types and the field format and EID for operating mode notifications. The frame may be used outside of VHT context as well, so don't include "VHT" in the names. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7e8a498..67c1a6c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -714,6 +714,30 @@ enum ieee80211_ht_chanwidth_values { IEEE80211_HT_CHANWIDTH_ANY = 1, }; +/** + * enum ieee80211_opmode_bits - VHT operating mode field bits + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: 20 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask + * (the NSS value is the value of this field + 1) + * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift + * @IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF: indicates streams in SU-MIMO PPDU + * using a beamforming steering matrix + */ +enum ieee80211_vht_opmode_bits { + IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3, + IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70, + IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4, + IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -844,6 +868,10 @@ struct ieee80211_mgmt { __le16 capability; u8 variable[0]; } __packed tdls_discover_resp; + struct { + u8 action_code; + u8 operating_mode; + } __packed vht_opmode_notif; } u; } __packed action; } u; @@ -1598,6 +1626,7 @@ enum ieee80211_eid { WLAN_EID_VHT_CAPABILITY = 191, WLAN_EID_VHT_OPERATION = 192, + WLAN_EID_OPMODE_NOTIF = 199, /* 802.11ad */ WLAN_EID_NON_TX_BSSID_CAP = 83, @@ -1652,6 +1681,7 @@ enum ieee80211_category { WLAN_CATEGORY_WMM = 17, WLAN_CATEGORY_FST = 18, WLAN_CATEGORY_UNPROT_DMG = 20, + WLAN_CATEGORY_VHT = 21, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1677,6 +1707,13 @@ enum ieee80211_ht_actioncode { WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, }; +/* VHT action codes */ +enum ieee80211_vht_actioncode { + WLAN_VHT_ACTION_COMPRESSED_BF = 0, + WLAN_VHT_ACTION_GROUPID_MGMT = 1, + WLAN_VHT_ACTION_OPMODE_NOTIF = 2, +}; + /* Self Protected Action codes */ enum ieee80211_self_protected_actioncode { WLAN_SP_RESERVED = 0, -- cgit v0.10.2 From 8921d04e8df7475d733d853564bdb001e83bf33f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:26:42 +0100 Subject: mac80211: track number of spatial streams With VHT, a station can change the number of spatial streams it can receive on the fly, not unlike spatial multiplexing in HT. Prepare for that by tracking the maximum number of spatial streams it can receive when the connection is established. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1e3b4f7..a608ab98 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1237,6 +1237,10 @@ enum ieee80211_sta_rx_bandwidth { * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. * @bandwidth: current bandwidth the station can receive with + * @rx_nss: in HT/VHT, the maximum number of spatial streams the + * station can receive at the moment, changed by operating mode + * notifications and capabilities. The value is only valid after + * the station moves to associated state. */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1247,6 +1251,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6b41d77..3b13af4 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1432,6 +1432,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); +void ieee80211_sta_set_rx_nss(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index 301386d..d35a5dd 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -68,6 +68,8 @@ static inline void rate_control_rate_init(struct sta_info *sta) sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band]; rcu_read_unlock(); + ieee80211_sta_set_rx_nss(sta); + ref->ops->rate_init(ref->priv, sband, ista, priv_sta); set_sta_flag(sta, WLAN_STA_RATE_CONTROL); } diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 0fc9a2f..67436e3 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -74,3 +74,44 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) return IEEE80211_STA_RX_BW_80; } } + +void ieee80211_sta_set_rx_nss(struct sta_info *sta) +{ + u8 ht_rx_nss = 0, vht_rx_nss = 0; + + /* if we received a notification already don't overwrite it */ + if (sta->sta.rx_nss) + return; + + if (sta->sta.ht_cap.ht_supported) { + if (sta->sta.ht_cap.mcs.rx_mask[0]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[1]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[2]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[3]) + ht_rx_nss++; + /* FIXME: consider rx_highest? */ + } + + if (sta->sta.vht_cap.vht_supported) { + int i; + u16 rx_mcs_map; + + rx_mcs_map = le16_to_cpu(sta->sta.vht_cap.vht_mcs.rx_mcs_map); + + for (i = 7; i >= 0; i--) { + u8 mcs = (rx_mcs_map >> (2 * i)) & 3; + + if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) { + vht_rx_nss = i + 1; + break; + } + } + /* FIXME: consider rx_highest? */ + } + + ht_rx_nss = max(ht_rx_nss, vht_rx_nss); + sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); +} -- cgit v0.10.2 From 0af83d3df5863224336a18c24a14fda542b712f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:55:36 +0100 Subject: mac80211: handle VHT operating mode notification Handle the operating mode notification action frame. When the supported streams or the bandwidth change let the driver and rate control algorithm know. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 67c1a6c..12b5996 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1301,6 +1301,7 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C #define IEEE80211_VHT_CAP_RXLDPC 0x00000010 #define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 #define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a608ab98..b7fb311 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2118,11 +2118,14 @@ enum ieee80211_frame_release_type { * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about * the peer. + * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed + * by the peer */ enum ieee80211_rate_control_changed { IEEE80211_RC_BW_CHANGED = BIT(0), IEEE80211_RC_SMPS_CHANGED = BIT(1), IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2), + IEEE80211_RC_NSS_CHANGED = BIT(3), }; /** diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index a64b4f0..797969b 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -212,6 +212,10 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, changed = true; sta->sta.bandwidth = bw; + sta->cur_max_bandwidth = + ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + return changed; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 3b13af4..4947c91 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1433,6 +1433,9 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); +void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, u8 opmode, + enum ieee80211_band band); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 8a861a5..1617e0b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2436,6 +2436,36 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; + case WLAN_CATEGORY_VHT: + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT && + sdata->vif.type != NL80211_IFTYPE_AP_VLAN && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC) + break; + + /* verify action code is present */ + if (len < IEEE80211_MIN_ACTION_SIZE + 1) + goto invalid; + + switch (mgmt->u.action.u.vht_opmode_notif.action_code) { + case WLAN_VHT_ACTION_OPMODE_NOTIF: { + u8 opmode; + + /* verify opmode is present */ + if (len < IEEE80211_MIN_ACTION_SIZE + 2) + goto invalid; + + opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; + + ieee80211_vht_handle_opmode(rx->sdata, rx->sta, + opmode, status->band); + goto handled; + } + default: + break; + } + break; case WLAN_CATEGORY_BACK: if (sdata->vif.type != NL80211_IFTYPE_STATION && sdata->vif.type != NL80211_IFTYPE_MESH_POINT && diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 03c42f8..63dfdb5 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -297,6 +297,8 @@ struct sta_ampdu_mlme { * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered * @rcu_head: RCU head used for freeing this station struct + * @cur_max_bandwidth: maximum bandwidth to use for TX to the station, + * taken from HT/VHT capabilities or VHT operating mode notification */ struct sta_info { /* General information, mostly static */ @@ -398,6 +400,8 @@ struct sta_info { } debugfs; #endif + enum ieee80211_sta_rx_bandwidth cur_max_bandwidth; + unsigned int lost_packets; unsigned int beacon_loss_count; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 67436e3..0951f74 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -10,6 +10,7 @@ #include #include #include "ieee80211_i.h" +#include "rate.h" void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, @@ -39,6 +40,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; + break; + default: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; + } + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); } @@ -46,12 +56,13 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 cap = sta->sta.vht_cap.cap; + enum ieee80211_sta_rx_bandwidth bw; - if (!sta->sta.vht_cap.vht_supported) - return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + if (!sta->sta.vht_cap.vht_supported) { + bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; - - /* TODO: handle VHT opmode notification data */ + goto check_max; + } switch (sdata->vif.bss_conf.chandef.width) { default: @@ -60,19 +71,31 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) case NL80211_CHAN_WIDTH_20_NOHT: case NL80211_CHAN_WIDTH_20: case NL80211_CHAN_WIDTH_40: - return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; case NL80211_CHAN_WIDTH_160: - if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) - return IEEE80211_STA_RX_BW_160; + if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) { + bw = IEEE80211_STA_RX_BW_160; + break; + } /* fall through */ case NL80211_CHAN_WIDTH_80P80: - if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) - return IEEE80211_STA_RX_BW_160; + if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) { + bw = IEEE80211_STA_RX_BW_160; + break; + } /* fall through */ case NL80211_CHAN_WIDTH_80: - return IEEE80211_STA_RX_BW_80; + bw = IEEE80211_STA_RX_BW_80; } + + check_max: + if (bw > sta->cur_max_bandwidth) + bw = sta->cur_max_bandwidth; + return bw; } void ieee80211_sta_set_rx_nss(struct sta_info *sta) @@ -115,3 +138,53 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) ht_rx_nss = max(ht_rx_nss, vht_rx_nss); sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); } + +void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, u8 opmode, + enum ieee80211_band band) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_supported_band *sband; + enum ieee80211_sta_rx_bandwidth new_bw; + u32 changed = 0; + u8 nss; + + sband = local->hw.wiphy->bands[band]; + + /* ignore - no support for BF yet */ + if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF) + return; + + nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + + if (sta->sta.rx_nss != nss) { + sta->sta.rx_nss = nss; + changed |= IEEE80211_RC_NSS_CHANGED; + } + + switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; + break; + } + + new_bw = ieee80211_sta_cur_vht_bw(sta); + if (new_bw != sta->sta.bandwidth) { + sta->sta.bandwidth = new_bw; + changed |= IEEE80211_RC_NSS_CHANGED; + } + + if (changed) + rate_control_rate_update(local, sband, sta, changed); +} -- cgit v0.10.2 From 1128958dc22cbfa2562082da2621a06ba71bdce2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 17:36:12 +0100 Subject: mac80211: init HT TX data before rate control In case of connection, the station data is initialised from the beacon/probe response first and then updated from the association response. If the latter is different we update the rate control algorithm and driver. Instead of doing it this way, set the station data properly with data from the association response before initializing rate control. Also simplify the code by passing the station pointer. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index be11472..b97b615 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -175,6 +175,7 @@ static int ecw2cw(int ecw) } static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, const u8 *bssid, bool reconfig) { @@ -182,11 +183,13 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; - struct sta_info *sta; u32 changed = 0; u16 ht_opmode; bool disable_40 = false; + if (WARN_ON_ONCE(!sta)) + return 0; + rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { @@ -216,28 +219,19 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) disable_40 = true; - mutex_lock(&local->sta_mtx); - sta = sta_info_get(sdata, bssid); - - if (WARN_ON_ONCE(!sta)) { - mutex_unlock(&local->sta_mtx); - return changed; - } - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (!reconfig || - disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { + if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); - rate_control_rate_update(local, sband, sta, - IEEE80211_RC_BW_CHANGED); + if (reconfig) + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); } - mutex_unlock(&local->sta_mtx); ht_opmode = le16_to_cpu(ht_oper->operation_mode); @@ -2217,6 +2211,12 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems.vht_cap_elem, sta); + if (elems.ht_operation && elems.wmm_param && + !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) + changed |= ieee80211_config_ht_tx(sdata, sta, + elems.ht_operation, + cbss->bssid, false); + rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) @@ -2254,11 +2254,6 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_set_wmm_default(sdata, false); changed |= BSS_CHANGED_QOS; - if (elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, - cbss->bssid, false); - /* set AID and assoc capability, * ieee80211_set_associated() will tell the driver */ bss_conf->aid = aid; @@ -2734,10 +2729,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, erp_valid, erp_value); + mutex_lock(&local->sta_mtx); if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, + changed |= ieee80211_config_ht_tx(sdata, + sta_info_get(sdata, bssid), + elems.ht_operation, bssid, true); + mutex_unlock(&local->sta_mtx); if (elems.country_elem && elems.pwr_constr_elem && mgmt->u.probe_resp.capab_info & -- cgit v0.10.2 From cb145022c82bde532b386c7a6f1dcef1b2bca2e5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 20:41:50 +0100 Subject: mac80211: fix HT/VHT disable flags The code to disable HT and VHT if VHT was advertised without VHT is wrong -- it accidentally uses the wrong flags. Fix that. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b97b615..e6da6bf 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3588,8 +3588,8 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, vht_oper = NULL; sdata_info(sdata, "AP advertised VHT without HT, disabling both\n"); - sdata->flags |= IEEE80211_STA_DISABLE_HT; - sdata->flags |= IEEE80211_STA_DISABLE_VHT; + ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; } } -- cgit v0.10.2 From 18942d3be0e0e67aa40550ce3266e48b51845d52 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 21:30:37 +0100 Subject: mac80211: fix ieee80211_change_chandef name This should be called ieee80211_change_chanctx() since it changes the channel context, not a chandef. Signed-off-by: Johannes Berg diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index d91ccfc..78dbb37 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -9,7 +9,7 @@ #include "ieee80211_i.h" #include "driver-ops.h" -static void ieee80211_change_chandef(struct ieee80211_local *local, +static void ieee80211_change_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *ctx, const struct cfg80211_chan_def *chandef) { @@ -49,7 +49,7 @@ ieee80211_find_chanctx(struct ieee80211_local *local, if (!compat) continue; - ieee80211_change_chandef(local, ctx, compat); + ieee80211_change_chanctx(local, ctx, compat); return ctx; } @@ -175,7 +175,7 @@ static void ieee80211_recalc_chanctx_chantype(struct ieee80211_local *local, if (WARN_ON_ONCE(!compat)) return; - ieee80211_change_chandef(local, ctx, compat); + ieee80211_change_chanctx(local, ctx, compat); } static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, -- cgit v0.10.2 From bee7f58699a406a4210ba9e0367bae7ac666abd0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 22:24:55 +0100 Subject: mac80211: handle operating mode notif in beacon/assoc response In beacons and association response frames an AP may include an operating mode notification element to advertise changes in the number of spatial streams it can receive. Handle this using the existing function that handles the action frame, but only handle NSS changes, not bandwidth changes which aren't allowed here. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 4947c91..892bac6 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1197,6 +1197,7 @@ struct ieee802_11_elems { u8 *pwr_constr_elem; u8 *quiet_elem; /* first quite element */ u8 *timeout_int; + u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; @@ -1435,7 +1436,7 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band); + enum ieee80211_band band, bool nss_only); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e6da6bf..f2c6f77 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2217,6 +2217,21 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, elems.ht_operation, cbss->bssid, false); + /* + * If an operating mode notification IE is present, override the + * NSS calculation (that would be done in rate_control_rate_init()) + * and use the # of streams from that element. + */ + if (elems.opmode_notif && + !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { + u8 nss; + + nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + sta->sta.rx_nss = nss; + } + rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) @@ -2489,6 +2504,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; + struct sta_info *sta; u32 changed = 0; bool erp_valid; u8 erp_value = 0; @@ -2728,14 +2744,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, le16_to_cpu(mgmt->u.beacon.capab_info), erp_valid, erp_value); - mutex_lock(&local->sta_mtx); + sta = sta_info_get(sdata, bssid); + if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, - sta_info_get(sdata, bssid), + changed |= ieee80211_config_ht_tx(sdata, sta, elems.ht_operation, bssid, true); + + if (sta && elems.opmode_notif) + ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, + rx_status->band, true); mutex_unlock(&local->sta_mtx); if (elems.country_elem && elems.pwr_constr_elem && diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1617e0b..30f1ba6 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2459,7 +2459,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; ieee80211_vht_handle_opmode(rx->sdata, rx->sta, - opmode, status->band); + opmode, status->band, + false); goto handled; } default: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index b231bc2..e24ff38 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -787,6 +787,12 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, else elem_parse_failed = true; break; + case WLAN_EID_OPMODE_NOTIF: + if (elen > 0) + elems->opmode_notif = pos; + else + elem_parse_failed = true; + break; case WLAN_EID_MESH_ID: elems->mesh_id = pos; elems->mesh_id_len = elen; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 0951f74..a9549fc 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -141,7 +141,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band) + enum ieee80211_band band, bool nss_only) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -164,6 +164,9 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } + if (nss_only) + goto change; + switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; @@ -185,6 +188,7 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } + change: if (changed) rate_control_rate_update(local, sband, sta, changed); } -- cgit v0.10.2 From 08e6effa1187cc5f401a1cc286ce84f0a581b35a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 23:33:32 +0100 Subject: mac80211: disable HT/VHT if AP has no HT/VHT capability Having HT/VHT operation IEs but not capability IEs leads to a strange situation where we configure the channel to an HT or VHT bandwidth and then can't actually use it. Prevent this by checking that the HT and VHT capability IEs are present as well as the operation IEs; if not, disable HT and/or VHT. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f2c6f77..03f2788 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3589,16 +3589,22 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && sband->ht_cap.ht_supported) { - const u8 *ht_oper_ie; + const u8 *ht_oper_ie, *ht_cap; ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) ht_oper = (void *)(ht_oper_ie + 2); + + ht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); + if (!ht_cap || ht_cap[1] < sizeof(struct ieee80211_ht_cap)) { + ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + ht_oper = NULL; + } } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && sband->vht_cap.vht_supported) { - const u8 *vht_oper_ie; + const u8 *vht_oper_ie, *vht_cap; vht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_OPERATION); @@ -3611,6 +3617,12 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; } + + vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); + if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; + vht_oper = NULL; + } } ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, -- cgit v0.10.2 From f2d9330ee820b01e2b1caf46370bc7963d259908 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 13:15:55 +0100 Subject: mac80211: clean up channel use in ieee80211_config_ht_tx The channel use is confusing, some uses the channel context and some the bss_conf.chandef. The latter is fine, so get rid of the channel context part. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 03f2788..8fdf1e1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -181,7 +181,6 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; - struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u32 changed = 0; u16 ht_opmode; @@ -190,23 +189,16 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, if (WARN_ON_ONCE(!sta)) return 0; - rcu_read_lock(); - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (WARN_ON(!chanctx_conf)) { - rcu_read_unlock(); - return 0; - } - chan = chanctx_conf->def.chan; - rcu_read_unlock(); + chan = sdata->vif.bss_conf.chandef.chan; sband = local->hw.wiphy->bands[chan->band]; switch (sdata->vif.bss_conf.chandef.width) { case NL80211_CHAN_WIDTH_40: - if (sdata->vif.bss_conf.chandef.chan->center_freq > + if (chan->center_freq > sdata->vif.bss_conf.chandef.center_freq1 && chan->flags & IEEE80211_CHAN_NO_HT40MINUS) disable_40 = true; - if (sdata->vif.bss_conf.chandef.chan->center_freq < + if (chan->center_freq < sdata->vif.bss_conf.chandef.center_freq1 && chan->flags & IEEE80211_CHAN_NO_HT40PLUS) disable_40 = true; -- cgit v0.10.2 From 2c9b735982ee8a2d34e7eeb3e26b683f81872fdb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 21:37:29 +0100 Subject: mac80211: add ieee80211_vif_change_bandwidth For HT and VHT the current bandwidth can change, add the function ieee80211_vif_change_bandwidth() to take care of this. It returns a failure if the new bandwidth isn't compatible with the existing channel context, the caller has to handle that. When it happens, also inform the driver that the bandwidth changed for this virtual interface (no drivers would actually care today though.) Changing to/from HT/VHT isn't allowed though. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b7fb311..54e2add 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -215,6 +215,9 @@ struct ieee80211_chanctx_conf { * changed (currently only in P2P client mode, GO mode will be later) * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when * it becomes valid, managed mode only) + * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed, + * note that this is only called when it changes after the channel + * context had been assigned. */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -238,6 +241,7 @@ enum ieee80211_bss_change { BSS_CHANGED_TXPOWER = 1<<18, BSS_CHANGED_P2P_PS = 1<<19, BSS_CHANGED_DTIM_PERIOD = 1<<20, + BSS_CHANGED_BANDWIDTH = 1<<21, /* when adding here, make sure to change ieee80211_reconfig */ }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 78dbb37..78c0d90 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -375,6 +375,55 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, return ret; } +int ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_chanctx_conf *conf; + struct ieee80211_chanctx *ctx; + int ret; + + if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) + return -EINVAL; + + mutex_lock(&local->chanctx_mtx); + if (cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) { + ret = 0; + goto out; + } + + if (chandef->width == NL80211_CHAN_WIDTH_20_NOHT || + sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) { + ret = -EINVAL; + goto out; + } + + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + if (!conf) { + ret = -EINVAL; + goto out; + } + + ctx = container_of(conf, struct ieee80211_chanctx, conf); + if (!cfg80211_chandef_compatible(&conf->def, chandef)) { + ret = -EINVAL; + goto out; + } + + sdata->vif.bss_conf.chandef = *chandef; + + ieee80211_recalc_chanctx_chantype(local, ctx); + + *changed |= BSS_CHANGED_BANDWIDTH; + ret = 0; + out: + mutex_unlock(&local->chanctx_mtx); + return ret; +} + void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) { WARN_ON(sdata->dev && netif_carrier_ok(sdata->dev)); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 892bac6..d107444 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1613,6 +1613,10 @@ int __must_check ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, const struct cfg80211_chan_def *chandef, enum ieee80211_chanctx_mode mode); +int __must_check +ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, -- cgit v0.10.2 From 6565ec9b58483a9706fbe888364aeceb359aeced Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 14:52:32 +0100 Subject: mac80211: move ieee80211_determine_chantype function The next patch will need it further up in the file, so move it unchanged now. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8fdf1e1..50423c6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -174,6 +174,201 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } +static u32 chandef_downgrade(struct cfg80211_chan_def *c) +{ + u32 ret; + int tmp; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_40: + c->width = NL80211_CHAN_WIDTH_20; + c->center_freq1 = c->chan->center_freq; + ret = IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80: + tmp = (30 + c->chan->center_freq - c->center_freq1)/20; + /* n_P40 */ + tmp /= 2; + /* freq_P40 */ + c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; + c->width = NL80211_CHAN_WIDTH_40; + ret = IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80P80: + c->center_freq2 = 0; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + case NL80211_CHAN_WIDTH_160: + /* n_P20 */ + tmp = (70 + c->chan->center_freq - c->center_freq1)/20; + /* n_P80 */ + tmp /= 4; + c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + default: + case NL80211_CHAN_WIDTH_20_NOHT: + WARN_ON_ONCE(1); + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + } + + WARN_ON_ONCE(!cfg80211_chandef_valid(c)); + + return ret; +} + +static u32 +ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct ieee80211_channel *channel, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + struct cfg80211_chan_def *chandef) +{ + struct cfg80211_chan_def vht_chandef; + u32 ht_cfreq, ret; + + chandef->chan = channel; + chandef->width = NL80211_CHAN_WIDTH_20_NOHT; + chandef->center_freq1 = channel->center_freq; + chandef->center_freq2 = 0; + + if (!ht_oper || !sband->ht_cap.ht_supported) { + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + chandef->width = NL80211_CHAN_WIDTH_20; + + ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, + channel->band); + /* check that channel matches the right operating channel */ + if (channel->center_freq != ht_cfreq) { + /* + * It's possible that some APs are confused here; + * Netgear WNDR3700 sometimes reports 4 higher than + * the actual channel in association responses, but + * since we look at probe response/beacon data here + * it should be OK. + */ + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + /* check 40 MHz support, if we have it */ + if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 += 10; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 -= 10; + break; + } + } else { + /* 40 MHz (and 80 MHz) must be supported for VHT */ + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!vht_oper || !sband->vht_cap.vht_supported) { + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + vht_chandef.chan = channel; + vht_chandef.center_freq1 = + ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, + channel->band); + vht_chandef.center_freq2 = 0; + + if (vht_oper->center_freq_seg2_idx) + vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + vht_oper->center_freq_seg2_idx, + channel->band); + + switch (vht_oper->chan_width) { + case IEEE80211_VHT_CHANWIDTH_USE_HT: + vht_chandef.width = chandef->width; + break; + case IEEE80211_VHT_CHANWIDTH_80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80; + break; + case IEEE80211_VHT_CHANWIDTH_160MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_160; + break; + case IEEE80211_VHT_CHANWIDTH_80P80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + break; + default: + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!cfg80211_chandef_valid(&vht_chandef)) { + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (cfg80211_chandef_identical(chandef, &vht_chandef)) { + ret = 0; + goto out; + } + + if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + *chandef = vht_chandef; + + ret = 0; + +out: + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) { + if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { + ret = IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT; + goto out; + } + + ret |= chandef_downgrade(chandef); + } + + if (chandef->width != vht_chandef.width) + sdata_info(sdata, + "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); + + WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); + return ret; +} + static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, @@ -3321,201 +3516,6 @@ int ieee80211_max_network_latency(struct notifier_block *nb, return 0; } -static u32 chandef_downgrade(struct cfg80211_chan_def *c) -{ - u32 ret; - int tmp; - - switch (c->width) { - case NL80211_CHAN_WIDTH_20: - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_40: - c->width = NL80211_CHAN_WIDTH_20; - c->center_freq1 = c->chan->center_freq; - ret = IEEE80211_STA_DISABLE_40MHZ | - IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80: - tmp = (30 + c->chan->center_freq - c->center_freq1)/20; - /* n_P40 */ - tmp /= 2; - /* freq_P40 */ - c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; - c->width = NL80211_CHAN_WIDTH_40; - ret = IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80P80: - c->center_freq2 = 0; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - case NL80211_CHAN_WIDTH_160: - /* n_P20 */ - tmp = (70 + c->chan->center_freq - c->center_freq1)/20; - /* n_P80 */ - tmp /= 4; - c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - default: - case NL80211_CHAN_WIDTH_20_NOHT: - WARN_ON_ONCE(1); - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - } - - WARN_ON_ONCE(!cfg80211_chandef_valid(c)); - - return ret; -} - -static u32 -ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_channel *channel, - const struct ieee80211_ht_operation *ht_oper, - const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) -{ - struct cfg80211_chan_def vht_chandef; - u32 ht_cfreq, ret; - - chandef->chan = channel; - chandef->width = NL80211_CHAN_WIDTH_20_NOHT; - chandef->center_freq1 = channel->center_freq; - chandef->center_freq2 = 0; - - if (!ht_oper || !sband->ht_cap.ht_supported) { - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - chandef->width = NL80211_CHAN_WIDTH_20; - - ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, - channel->band); - /* check that channel matches the right operating channel */ - if (channel->center_freq != ht_cfreq) { - /* - * It's possible that some APs are confused here; - * Netgear WNDR3700 sometimes reports 4 higher than - * the actual channel in association responses, but - * since we look at probe response/beacon data here - * it should be OK. - */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - /* check 40 MHz support, if we have it */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 += 10; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 -= 10; - break; - } - } else { - /* 40 MHz (and 80 MHz) must be supported for VHT */ - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!vht_oper || !sband->vht_cap.vht_supported) { - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - vht_chandef.chan = channel; - vht_chandef.center_freq1 = - ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, - channel->band); - vht_chandef.center_freq2 = 0; - - if (vht_oper->center_freq_seg2_idx) - vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - vht_oper->center_freq_seg2_idx, - channel->band); - - switch (vht_oper->chan_width) { - case IEEE80211_VHT_CHANWIDTH_USE_HT: - vht_chandef.width = chandef->width; - break; - case IEEE80211_VHT_CHANWIDTH_80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80; - break; - case IEEE80211_VHT_CHANWIDTH_160MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_160; - break; - case IEEE80211_VHT_CHANWIDTH_80P80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80P80; - break; - default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (cfg80211_chandef_identical(chandef, &vht_chandef)) { - ret = 0; - goto out; - } - - if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - *chandef = vht_chandef; - - ret = 0; - -out: - while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, - IEEE80211_CHAN_DISABLED)) { - if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { - ret = IEEE80211_STA_DISABLE_HT | - IEEE80211_STA_DISABLE_VHT; - goto out; - } - - ret |= chandef_downgrade(chandef); - } - - if (chandef->width != vht_chandef.width) - sdata_info(sdata, - "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); - - WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); - return ret; -} - static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss) { -- cgit v0.10.2 From 30eb1dc2c43039e0fe278e6f3a288de9f216d70d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 15:12:14 +0100 Subject: mac80211: properly track HT/VHT operation changes A while ago, I made the mac80211 station code never change the channel type after association. This solved a number of issues but is ultimately wrong, we should react if the AP changes the HT operation IE and switches bandwidth. One of the issues is that we associate as HT40 capable, but if the AP ever switches to 40 MHz we won't be able to receive such frames because we never set our channel to 40 MHz. This addresses this and VHT operation changes. If there's a change that is incompatible with our setup, e.g. if the AP decides to change the channel entirely (and for some reason we still hear the beacon) we'll just disconnect. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 50423c6..05b229e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -114,6 +114,9 @@ enum rx_mgmt_action { /* caller must call cfg80211_send_assoc_timeout() */ RX_MGMT_CFG80211_ASSOC_TIMEOUT, + + /* used when a processed beacon causes a deauth */ + RX_MGMT_CFG80211_TX_DEAUTH, }; /* utils */ @@ -234,7 +237,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, const struct ieee80211_ht_operation *ht_oper, const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) + struct cfg80211_chan_def *chandef, bool verbose) { struct cfg80211_chan_def vht_chandef; u32 ht_cfreq, ret; @@ -262,10 +265,11 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, * since we look at probe response/beacon data here * it should be OK. */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); + if (verbose) + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; goto out; } @@ -319,16 +323,18 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, vht_chandef.width = NL80211_CHAN_WIDTH_80P80; break; default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); + if (verbose) + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); ret = IEEE80211_STA_DISABLE_VHT; goto out; } if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); + if (verbose) + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } @@ -339,8 +345,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, } if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); + if (verbose) + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } @@ -361,7 +368,7 @@ out: ret |= chandef_downgrade(chandef); } - if (chandef->width != vht_chandef.width) + if (chandef->width != vht_chandef.width && verbose) sdata_info(sdata, "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); @@ -369,66 +376,128 @@ out: return ret; } -static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, - struct sta_info *sta, - struct ieee80211_ht_operation *ht_oper, - const u8 *bssid, bool reconfig) +static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + const u8 *bssid, u32 *changed) { struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; - u32 changed = 0; + struct cfg80211_chan_def chandef; u16 ht_opmode; - bool disable_40 = false; + u32 flags; + enum ieee80211_sta_rx_bandwidth new_sta_bw; + int ret; - if (WARN_ON_ONCE(!sta)) + /* if HT was/is disabled, don't track any bandwidth changes */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) return 0; + /* don't check VHT if we associated as non-VHT station */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) + vht_oper = NULL; + + if (WARN_ON_ONCE(!sta)) + return -EINVAL; + chan = sdata->vif.bss_conf.chandef.chan; sband = local->hw.wiphy->bands[chan->band]; - switch (sdata->vif.bss_conf.chandef.width) { + /* calculate new channel (type) based on HT/VHT operation IEs */ + flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper, + vht_oper, &chandef, false); + + /* + * Downgrade the new channel if we associated with restricted + * capabilities. For example, if we associated as a 20 MHz STA + * to a 40 MHz AP (due to regulatory, capabilities or config + * reasons) then switching to a 40 MHz channel now won't do us + * any good -- we couldn't use it with the AP. + */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && + chandef.width == NL80211_CHAN_WIDTH_80P80) + flags |= chandef_downgrade(&chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && + chandef.width == NL80211_CHAN_WIDTH_160) + flags |= chandef_downgrade(&chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && + chandef.width > NL80211_CHAN_WIDTH_20) + flags |= chandef_downgrade(&chandef); + + if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) + return 0; + + sdata_info(sdata, + "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n", + ifmgd->bssid, chandef.chan->center_freq, chandef.width, + chandef.center_freq1, chandef.center_freq2); + + if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT | + IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ)) || + !cfg80211_chandef_valid(&chandef)) { + sdata_info(sdata, + "AP %pM changed bandwidth in a way we can't support - disconnect\n", + ifmgd->bssid); + return -EINVAL; + } + + switch (chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + new_sta_bw = IEEE80211_STA_RX_BW_20; + break; case NL80211_CHAN_WIDTH_40: - if (chan->center_freq > - sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40MINUS) - disable_40 = true; - if (chan->center_freq < - sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40PLUS) - disable_40 = true; + new_sta_bw = IEEE80211_STA_RX_BW_40; break; - default: + case NL80211_CHAN_WIDTH_80: + new_sta_bw = IEEE80211_STA_RX_BW_80; break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + new_sta_bw = IEEE80211_STA_RX_BW_160; + break; + default: + return -EINVAL; } - /* This can change during the lifetime of the BSS */ - if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - disable_40 = true; + if (new_sta_bw > sta->cur_max_bandwidth) + new_sta_bw = sta->cur_max_bandwidth; - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - disable_40 = true; + if (new_sta_bw < sta->sta.bandwidth) { + sta->sta.bandwidth = new_sta_bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); + } - if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { - if (disable_40) - sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; - else - sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); + ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); + if (ret) { + sdata_info(sdata, + "AP %pM changed bandwidth to incompatible one - disconnect\n", + ifmgd->bssid); + return ret; + } - if (reconfig) - rate_control_rate_update(local, sband, sta, - IEEE80211_RC_BW_CHANGED); + if (new_sta_bw > sta->sta.bandwidth) { + sta->sta.bandwidth = new_sta_bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); } ht_opmode = le16_to_cpu(ht_oper->operation_mode); /* if bss configuration changed store the new one */ - if (!reconfig || (sdata->vif.bss_conf.ht_operation_mode != ht_opmode)) { - changed |= BSS_CHANGED_HT; + if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { + *changed |= BSS_CHANGED_HT; sdata->vif.bss_conf.ht_operation_mode = ht_opmode; } - return changed; + return 0; } /* frame sending functions */ @@ -2377,6 +2446,24 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ifmgd->aid = aid; + /* + * We previously checked these in the beacon/probe response, so + * they should be present here. This is just a safety net. + */ + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && + (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) { + sdata_info(sdata, + "HT AP is missing WMM params or HT capability/operation in AssocResp\n"); + return false; + } + + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && + (!elems.vht_cap_elem || !elems.vht_operation)) { + sdata_info(sdata, + "VHT AP is missing VHT capability/operation in AssocResp\n"); + return false; + } + mutex_lock(&sdata->local->sta_mtx); /* * station info was already allocated and inserted before @@ -2390,6 +2477,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)]; + /* Set up internal HT/VHT capabilities */ if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, elems.ht_cap_elem, sta); @@ -2398,11 +2486,12 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems.vht_cap_elem, sta); - if (elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, sta, - elems.ht_operation, - cbss->bssid, false); + /* + * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data + * in their association response, so ignore that data for our own + * configuration. If it changed since the last beacon, we'll get the + * next beacon and update then. + */ /* * If an operating mode notification IE is present, override the @@ -2679,10 +2768,10 @@ static const u64 care_about_ies = (1ULL << WLAN_EID_HT_CAPABILITY) | (1ULL << WLAN_EID_HT_OPERATION); -static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) +static enum rx_mgmt_action +ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + u8 *deauth_buf, struct ieee80211_rx_status *rx_status) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; @@ -2703,18 +2792,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, /* Process beacon from the current BSS */ baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; if (baselen > len) - return; + return RX_MGMT_NONE; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (!chanctx_conf) { rcu_read_unlock(); - return; + return RX_MGMT_NONE; } if (rx_status->freq != chanctx_conf->def.chan->center_freq) { rcu_read_unlock(); - return; + return RX_MGMT_NONE; } chan = chanctx_conf->def.chan; rcu_read_unlock(); @@ -2742,12 +2831,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ifmgd->assoc_data->timeout = jiffies; ifmgd->assoc_data->timeout_started = true; run_again(ifmgd, ifmgd->assoc_data->timeout); - return; + return RX_MGMT_NONE; } if (!ifmgd->associated || !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) - return; + return RX_MGMT_NONE; bssid = ifmgd->associated->bssid; /* Track average RSSI from the Beacon frames of the current AP */ @@ -2885,7 +2974,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) - return; + return RX_MGMT_NONE; ifmgd->beacon_crc = ncrc; ifmgd->beacon_crc_valid = true; @@ -2934,11 +3023,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, sta, - elems.ht_operation, - bssid, true); + if (ieee80211_config_bw(sdata, sta, elems.ht_operation, + elems.vht_operation, bssid, &changed)) { + mutex_unlock(&local->sta_mtx); + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + true, deauth_buf); + return RX_MGMT_CFG80211_TX_DEAUTH; + } if (sta && elems.opmode_notif) ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, @@ -2954,6 +3046,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, elems.pwr_constr_elem); ieee80211_bss_info_change_notify(sdata, changed); + + return RX_MGMT_NONE; } void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, @@ -2964,6 +3058,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; struct cfg80211_bss *bss = NULL; enum rx_mgmt_action rma = RX_MGMT_NONE; + u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; u16 fc; rx_status = (struct ieee80211_rx_status *) skb->cb; @@ -2974,7 +3069,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, switch (fc & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_BEACON: - ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); + rma = ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, + deauth_buf, rx_status); break; case IEEE80211_STYPE_PROBE_RESP: ieee80211_rx_mgmt_probe_resp(sdata, skb); @@ -3023,6 +3119,10 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, case RX_MGMT_CFG80211_ASSOC_TIMEOUT: cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid); break; + case RX_MGMT_CFG80211_TX_DEAUTH: + cfg80211_send_deauth(sdata->dev, deauth_buf, + sizeof(deauth_buf)); + break; default: WARN(1, "unexpected: %d", rma); } @@ -3620,7 +3720,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, cbss->channel, ht_oper, vht_oper, - &chandef); + &chandef, true); sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), local->rx_chains); -- cgit v0.10.2 From c7a6ee27abd46247c1c7edfc49fb935138da7875 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:50:39 +0100 Subject: cfg80211: allow drivers to selectively disable 80/160 MHz Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ee11a3d..8a9200f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -100,6 +100,16 @@ enum ieee80211_band { * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. + * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, + * this flag indicates that an 80 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. + * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, + * this flag indicates that an 160 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -109,6 +119,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, IEEE80211_CHAN_NO_OFDM = 1<<6, + IEEE80211_CHAN_NO_80MHZ = 1<<7, + IEEE80211_CHAN_NO_160MHZ = 1<<8, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 810c23c..fd556ac 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -375,6 +375,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, case NL80211_CHAN_WIDTH_80: if (!vht_cap->vht_supported) return false; + prohibited_flags |= IEEE80211_CHAN_NO_80MHZ; width = 80; break; case NL80211_CHAN_WIDTH_160: @@ -382,6 +383,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, return false; if (!(vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ)) return false; + prohibited_flags |= IEEE80211_CHAN_NO_160MHZ; width = 160; break; default: @@ -389,7 +391,16 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, return false; } - /* TODO: missing regulatory check on 80/160 bandwidth */ + /* + * TODO: What if there are only certain 80/160/80+80 MHz channels + * allowed by the driver, or only certain combinations? + * For 40 MHz the driver can set the NO_HT40 flags, but for + * 80/160 MHz and in particular 80+80 MHz this isn't really + * feasible and we only have NO_80MHZ/NO_160MHZ so far but + * no way to cover 80+80 MHz or more complex restrictions. + * Note that such restrictions also need to be advertised to + * userspace, for example for P2P channel selection. + */ if (width > 20) prohibited_flags |= IEEE80211_CHAN_NO_OFDM; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index e97d5b0..93ab840 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -866,6 +866,10 @@ static void handle_channel(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && request_wiphy && request_wiphy == wiphy && @@ -1264,6 +1268,10 @@ static void handle_channel_custom(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); -- cgit v0.10.2 From 50640f169372b9977487a328dedf13a8debedff7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:59:39 +0100 Subject: nl80211: advertise HT/VHT channel limitations When drivers or regulatory have limitations on 40, 80 or 160 MHz channels, advertise these to userspace via nl80211. Also add a new feature flag to let userspace know this is supported. Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 90b7af8..3880f6a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2041,6 +2041,16 @@ enum nl80211_band_attr { * (enum nl80211_dfs_state) * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2055,6 +2065,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_MAX_TX_POWER, NL80211_FREQUENCY_ATTR_DFS_STATE, NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3421,6 +3435,8 @@ enum nl80211_ap_sme_features { * Note that even for drivers that support this, the default is to add * stations in authenticated/associated state, so to add unauthenticated * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3437,6 +3453,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, }; /** diff --git a/net/wireless/core.c b/net/wireless/core.c index 9220021..33b75b9 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -367,7 +367,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) rdev->wiphy.rts_threshold = (u32) -1; rdev->wiphy.coverage_class = 0; - rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH; + rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH | + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS; return &rdev->wiphy; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c1e18cc..7e40b9e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -562,6 +562,18 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time)) goto nla_put_failure; } + if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ)) + goto nla_put_failure; if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) -- cgit v0.10.2 From 4a3cb702b05868f67c4ee3da3380461c5b90b4ca Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 16:43:19 +0100 Subject: mac80211: constify IE parsing Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 12b5996..e085fcf 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2152,7 +2152,7 @@ static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) * @tim_len: length of the TIM IE * @aid: the AID to look for */ -static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim, +static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim, u8 tim_len, u16 aid) { u8 mask; diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 797969b..b84147a 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -94,7 +94,7 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, - struct ieee80211_ht_cap *ht_cap_ie, + const struct ieee80211_ht_cap *ht_cap_ie, struct sta_info *sta) { struct ieee80211_sta_ht_cap ht_cap; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d107444..d702f7d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1163,41 +1163,41 @@ struct ieee80211_ra_tid { /* Parsed Information Elements */ struct ieee802_11_elems { - u8 *ie_start; + const u8 *ie_start; size_t total_len; /* pointers to IEs */ - u8 *ssid; - u8 *supp_rates; - u8 *fh_params; - u8 *ds_params; - u8 *cf_params; - struct ieee80211_tim_ie *tim; - u8 *ibss_params; - u8 *challenge; - u8 *rsn; - u8 *erp_info; - u8 *ext_supp_rates; - u8 *wmm_info; - u8 *wmm_param; - struct ieee80211_ht_cap *ht_cap_elem; - struct ieee80211_ht_operation *ht_operation; - struct ieee80211_vht_cap *vht_cap_elem; - struct ieee80211_vht_operation *vht_operation; - struct ieee80211_meshconf_ie *mesh_config; - u8 *mesh_id; - u8 *peering; - __le16 *awake_window; - u8 *preq; - u8 *prep; - u8 *perr; - struct ieee80211_rann_ie *rann; - struct ieee80211_channel_sw_ie *ch_switch_ie; - u8 *country_elem; - u8 *pwr_constr_elem; - u8 *quiet_elem; /* first quite element */ - u8 *timeout_int; - u8 *opmode_notif; + const u8 *ssid; + const u8 *supp_rates; + const u8 *fh_params; + const u8 *ds_params; + const u8 *cf_params; + const struct ieee80211_tim_ie *tim; + const u8 *ibss_params; + const u8 *challenge; + const u8 *rsn; + const u8 *erp_info; + const u8 *ext_supp_rates; + const u8 *wmm_info; + const u8 *wmm_param; + const struct ieee80211_ht_cap *ht_cap_elem; + const struct ieee80211_ht_operation *ht_operation; + const struct ieee80211_vht_cap *vht_cap_elem; + const struct ieee80211_vht_operation *vht_operation; + const struct ieee80211_meshconf_ie *mesh_config; + const u8 *mesh_id; + const u8 *peering; + const __le16 *awake_window; + const u8 *preq; + const u8 *prep; + const u8 *perr; + const struct ieee80211_rann_ie *rann; + const struct ieee80211_channel_sw_ie *ch_switch_ie; + const u8 *country_elem; + const u8 *pwr_constr_elem; + const u8 *quiet_elem; /* first quite element */ + const u8 *timeout_int; + const u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; @@ -1276,10 +1276,10 @@ void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata); int ieee80211_max_network_latency(struct notifier_block *nb, unsigned long data, void *dummy); int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata); -void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, - u64 timestamp); +void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_channel_sw_ie *sw_elem, + struct ieee80211_bss *bss, u64 timestamp); void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata); @@ -1387,7 +1387,7 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, - struct ieee80211_ht_cap *ht_cap_ie, + const struct ieee80211_ht_cap *ht_cap_ie, struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, @@ -1428,10 +1428,11 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid); u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs); /* VHT */ -void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_vht_cap *vht_cap_ie, - struct sta_info *sta); +void +ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_vht_cap *vht_cap_ie, + struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, @@ -1555,7 +1556,7 @@ static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, - u8 *extra, size_t extra_len, const u8 *bssid, + const u8 *extra, size_t extra_len, const u8 *bssid, const u8 *da, const u8 *key, u8 key_len, u8 key_idx, u32 tx_flags); void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, @@ -1606,7 +1607,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, /* channel management */ void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, - struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef); int __must_check diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 7ad035f..a1bad31 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -265,8 +265,8 @@ int mesh_nexthop_lookup(struct sk_buff *skb, int mesh_nexthop_resolve(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata); -struct mesh_path *mesh_path_lookup(u8 *dst, - struct ieee80211_sub_if_data *sdata); +struct mesh_path *mesh_path_lookup(const u8 *dst, + struct ieee80211_sub_if_data *sdata); struct mesh_path *mpp_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata); int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata); @@ -276,7 +276,7 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop); void mesh_path_expire(struct ieee80211_sub_if_data *sdata); void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len); -int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata); +int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata); int mesh_path_add_gate(struct mesh_path *mpath); int mesh_path_send_to_gates(struct mesh_path *mpath); @@ -301,8 +301,9 @@ void mesh_sta_cleanup(struct sta_info *sta); void mesh_mpath_table_grow(void); void mesh_mpp_table_grow(void); /* Mesh paths */ -int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode, - const u8 *ra, struct ieee80211_sub_if_data *sdata); +int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, + __le16 target_rcode, const u8 *ra, + struct ieee80211_sub_if_data *sdata); void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta); void mesh_path_flush_pending(struct mesh_path *mpath); void mesh_path_tx_pending(struct mesh_path *mpath); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index f0dd874..585c1e2 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -30,14 +30,14 @@ static void mesh_queue_preq(struct mesh_path *, u8); -static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) +static inline u32 u32_field_get(const u8 *preq_elem, int offset, bool ae) { if (ae) offset += 6; return get_unaligned_le32(preq_elem + offset); } -static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae) +static inline u32 u16_field_get(const u8 *preq_elem, int offset, bool ae) { if (ae) offset += 6; @@ -102,10 +102,13 @@ enum mpath_frame_type { static const u8 broadcast_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, - u8 *orig_addr, __le32 orig_sn, u8 target_flags, u8 *target, - __le32 target_sn, const u8 *da, u8 hop_count, u8 ttl, - __le32 lifetime, __le32 metric, __le32 preq_id, - struct ieee80211_sub_if_data *sdata) + const u8 *orig_addr, __le32 orig_sn, + u8 target_flags, const u8 *target, + __le32 target_sn, const u8 *da, + u8 hop_count, u8 ttl, + __le32 lifetime, __le32 metric, + __le32 preq_id, + struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -235,7 +238,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, * also acquires in the TX path. To avoid a deadlock we don't transmit the * frame directly but add it to the pending queue instead. */ -int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, +int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, __le16 target_rcode, const u8 *ra, struct ieee80211_sub_if_data *sdata) { @@ -369,14 +372,14 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * path routing information is updated. */ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - u8 *hwmp_ie, enum mpath_frame_type action) + struct ieee80211_mgmt *mgmt, + const u8 *hwmp_ie, enum mpath_frame_type action) { struct ieee80211_local *local = sdata->local; struct mesh_path *mpath; struct sta_info *sta; bool fresh_info; - u8 *orig_addr, *ta; + const u8 *orig_addr, *ta; u32 orig_sn, orig_metric; unsigned long orig_lifetime, exp_time; u32 last_hop_metric, new_metric; @@ -511,11 +514,11 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *preq_elem, u32 metric) + const u8 *preq_elem, u32 metric) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath = NULL; - u8 *target_addr, *orig_addr; + const u8 *target_addr, *orig_addr; const u8 *da; u8 target_flags, ttl, flags; u32 orig_sn, target_sn, lifetime, orig_metric; @@ -648,11 +651,11 @@ next_hop_deref_protected(struct mesh_path *mpath) static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *prep_elem, u32 metric) + const u8 *prep_elem, u32 metric) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; - u8 *target_addr, *orig_addr; + const u8 *target_addr, *orig_addr; u8 ttl, hopcount, flags; u8 next_hop[ETH_ALEN]; u32 target_sn, orig_sn, lifetime; @@ -711,12 +714,13 @@ fail: } static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, u8 *perr_elem) + struct ieee80211_mgmt *mgmt, + const u8 *perr_elem) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; u8 ttl; - u8 *ta, *target_addr; + const u8 *ta, *target_addr; u32 target_sn; u16 target_rcode; @@ -758,15 +762,15 @@ endperr: } static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - struct ieee80211_rann_ie *rann) + struct ieee80211_mgmt *mgmt, + const struct ieee80211_rann_ie *rann) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; struct sta_info *sta; struct mesh_path *mpath; u8 ttl, flags, hopcount; - u8 *orig_addr; + const u8 *orig_addr; u32 orig_sn, metric, metric_txsta, interval; bool root_is_gate; diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index d5786c3..2ce4c40 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -181,7 +181,7 @@ errcopy: return -ENOMEM; } -static u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, +static u32 mesh_table_hash(const u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) { /* Use last four bytes of hw addr and interface index as hash index */ @@ -326,8 +326,8 @@ static void mesh_path_move_to_queue(struct mesh_path *gate_mpath, } -static struct mesh_path *mpath_lookup(struct mesh_table *tbl, u8 *dst, - struct ieee80211_sub_if_data *sdata) +static struct mesh_path *mpath_lookup(struct mesh_table *tbl, const u8 *dst, + struct ieee80211_sub_if_data *sdata) { struct mesh_path *mpath; struct hlist_node *n; @@ -359,7 +359,8 @@ static struct mesh_path *mpath_lookup(struct mesh_table *tbl, u8 *dst, * * Locking: must be called within a read rcu section. */ -struct mesh_path *mesh_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata) +struct mesh_path *mesh_path_lookup(const u8 *dst, + struct ieee80211_sub_if_data *sdata) { return mpath_lookup(rcu_dereference(mesh_paths), dst, sdata); } @@ -494,7 +495,7 @@ int mesh_gate_num(struct ieee80211_sub_if_data *sdata) * * State: the initial state of the new path is set to 0 */ -int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata) +int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 05b229e..7a8cd78 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1041,10 +1041,10 @@ static void ieee80211_chswitch_timer(unsigned long data) ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); } -void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, - u64 timestamp) +void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_channel_sw_ie *sw_elem, + struct ieee80211_bss *bss, u64 timestamp) { struct cfg80211_bss *cbss = container_of((void *)bss, struct cfg80211_bss, priv); @@ -1479,13 +1479,14 @@ void ieee80211_dfs_cac_timer_work(struct work_struct *work) /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, - u8 *wmm_param, size_t wmm_param_len) + const u8 *wmm_param, size_t wmm_param_len) { struct ieee80211_tx_queue_params params; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; size_t left; int count; - u8 *pos, uapsd_queues = 0; + const u8 *pos; + u8 uapsd_queues = 0; if (!local->ops->conf_tx) return false; @@ -2670,7 +2671,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, need_ps = sdata->u.mgd.associated && !sdata->u.mgd.dtim_period; if (elems->tim && !elems->parse_error) { - struct ieee80211_tim_ie *tim_ie = elems->tim; + const struct ieee80211_tim_ie *tim_ie = elems->tim; sdata->u.mgd.dtim_period = tim_ie->dtim_period; } } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e24ff38..0f38f43 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1035,7 +1035,7 @@ u32 ieee80211_mandatory_rates(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, - u8 *extra, size_t extra_len, const u8 *da, + const u8 *extra, size_t extra_len, const u8 *da, const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx, u32 tx_flags) { @@ -1947,7 +1947,7 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap, } void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, - struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef) { enum nl80211_channel_type channel_type; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index a9549fc..a2c2258 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -13,10 +13,11 @@ #include "rate.h" -void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_vht_cap *vht_cap_ie, - struct sta_info *sta) +void +ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_vht_cap *vht_cap_ie, + struct sta_info *sta) { struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; -- cgit v0.10.2 From 2b5e19677592c167d012c2d129407f39d2bdeb8d Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 14 Feb 2013 11:20:13 -0800 Subject: mac80211: cache mesh beacon Previously, the entire mesh beacon would be generated each time the beacon timer fired. Instead generate a beacon head and tail (so the TIM can easily be inserted when mesh power save is on) when starting a mesh or the MBSS parameters change. Also add a mutex for protecting beacon updates and preventing leaks. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c3869ba..0800fb3 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1800,11 +1800,10 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, conf->power_mode = nconf->power_mode; ieee80211_mps_local_status_update(sdata); } - if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) { + if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) conf->dot11MeshAwakeWindowDuration = nconf->dot11MeshAwakeWindowDuration; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); - } + ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); return 0; } @@ -1830,9 +1829,7 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, if (err) return err; - ieee80211_start_mesh(sdata); - - return 0; + return ieee80211_start_mesh(sdata); } static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d702f7d..388580a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -580,6 +580,9 @@ struct ieee80211_if_mesh { u32 mesh_seqnum; bool accepting_plinks; int num_gates; + struct beacon_data __rcu *beacon; + /* just protects beacon updates for now */ + struct mutex mtx; const u8 *ie; u8 ie_len; enum { diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0adec3d..6ff8ee9 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -171,7 +171,7 @@ void mesh_sta_cleanup(struct sta_info *sta) } if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) @@ -593,7 +593,7 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, mesh_path_expire(sdata); changed = mesh_accept_plinks_update(sdata); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); mod_timer(&ifmsh->housekeeping_timer, round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); @@ -644,7 +644,140 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) } #endif -void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) +static int +ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) +{ + struct beacon_data *bcn; + int head_len, tail_len; + struct sk_buff *skb; + struct ieee80211_mgmt *mgmt; + struct ieee80211_chanctx_conf *chanctx_conf; + enum ieee80211_band band; + u8 *pos; + struct ieee80211_sub_if_data *sdata; + int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + + sizeof(mgmt->u.beacon); + + sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); + rcu_read_lock(); + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + band = chanctx_conf->def.chan->band; + rcu_read_unlock(); + + head_len = hdr_len + + 2 + /* NULL SSID */ + 2 + 8 + /* supported rates */ + 2 + 3; /* DS params */ + tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) + + 2 + sizeof(struct ieee80211_ht_cap) + + 2 + sizeof(struct ieee80211_ht_operation) + + 2 + ifmsh->mesh_id_len + + 2 + sizeof(struct ieee80211_meshconf_ie) + + 2 + sizeof(__le16) + /* awake window */ + ifmsh->ie_len; + + bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL); + /* need an skb for IE builders to operate on */ + skb = dev_alloc_skb(max(head_len, tail_len)); + + if (!bcn || !skb) + goto out_free; + + /* + * pointers go into the block we allocated, + * memory is | beacon_data | head | tail | + */ + bcn->head = ((u8 *) bcn) + sizeof(*bcn); + + /* fill in the head */ + mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); + memset(mgmt, 0, hdr_len); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_BEACON); + eth_broadcast_addr(mgmt->da); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); + mgmt->u.beacon.beacon_int = + cpu_to_le16(sdata->vif.bss_conf.beacon_int); + mgmt->u.beacon.capab_info |= cpu_to_le16( + sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); + + pos = skb_put(skb, 2); + *pos++ = WLAN_EID_SSID; + *pos++ = 0x0; + + if (ieee80211_add_srates_ie(sdata, skb, true, band) || + mesh_add_ds_params_ie(skb, sdata)) + goto out_free; + + bcn->head_len = skb->len; + memcpy(bcn->head, skb->data, bcn->head_len); + + /* now the tail */ + skb_trim(skb, 0); + bcn->tail = bcn->head + bcn->head_len; + + if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) || + mesh_add_rsn_ie(skb, sdata) || + mesh_add_ht_cap_ie(skb, sdata) || + mesh_add_ht_oper_ie(skb, sdata) || + mesh_add_meshid_ie(skb, sdata) || + mesh_add_meshconf_ie(skb, sdata) || + mesh_add_awake_window_ie(skb, sdata) || + mesh_add_vendor_ies(skb, sdata)) + goto out_free; + + bcn->tail_len = skb->len; + memcpy(bcn->tail, skb->data, bcn->tail_len); + + dev_kfree_skb(skb); + rcu_assign_pointer(ifmsh->beacon, bcn); + return 0; +out_free: + kfree(bcn); + dev_kfree_skb(skb); + return -ENOMEM; +} + +static int +ieee80211_mesh_rebuild_beacon(struct ieee80211_if_mesh *ifmsh) +{ + struct ieee80211_sub_if_data *sdata; + struct beacon_data *old_bcn; + int ret; + sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); + + mutex_lock(&ifmsh->mtx); + + old_bcn = rcu_dereference_protected(ifmsh->beacon, + lockdep_is_held(&ifmsh->mtx)); + ret = ieee80211_mesh_build_beacon(ifmsh); + if (ret) + /* just reuse old beacon */ + goto out; + + if (old_bcn) + kfree_rcu(old_bcn, rcu_head); +out: + mutex_unlock(&ifmsh->mtx); + return ret; +} + +void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed) +{ + if (sdata->vif.bss_conf.enable_beacon && + (changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_HT | + BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT))) + if (ieee80211_mesh_rebuild_beacon(&sdata->u.mesh)) + return; + ieee80211_bss_info_change_notify(sdata, changed); +} + +int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; @@ -677,15 +810,22 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) changed |= ieee80211_mps_local_status_update(sdata); + if (ieee80211_mesh_build_beacon(ifmsh)) { + ieee80211_stop_mesh(sdata); + return -ENOMEM; + } + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); + return 0; } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct beacon_data *bcn; netif_carrier_off(sdata->dev); @@ -694,6 +834,12 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.enable_beacon = false; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + mutex_lock(&ifmsh->mtx); + bcn = rcu_dereference_protected(ifmsh->beacon, + lockdep_is_held(&ifmsh->mtx)); + rcu_assign_pointer(ifmsh->beacon, NULL); + kfree_rcu(bcn, rcu_head); + mutex_unlock(&ifmsh->mtx); /* flush STAs and mpaths on this iface */ sta_info_flush(sdata); @@ -883,6 +1029,8 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) skb_queue_head_init(&ifmsh->ps.bc_buf); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); + RCU_INIT_POINTER(ifmsh->beacon, NULL); + mutex_init(&ifmsh->mtx); sdata->vif.bss_conf.bssid = zero_addr; } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index a1bad31..1a1da87 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -239,10 +239,13 @@ void ieee80211s_update_metric(struct ieee80211_local *local, struct sta_info *sta, struct sk_buff *skb); void ieee80211s_stop(void); void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata); -void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); +int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); +/* wrapper for ieee80211_bss_info_change_notify() */ +void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed); /* mesh power save */ u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 7765139..f7526e5 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -508,7 +508,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -1090,5 +1090,5 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m rcu_read_unlock(); if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7d8c629..fe644f9 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2444,71 +2444,26 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); } else if (ieee80211_vif_is_mesh(&sdata->vif)) { - struct ieee80211_mgmt *mgmt; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - u8 *pos; - int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + - sizeof(mgmt->u.beacon); + struct beacon_data *bcn = rcu_dereference(ifmsh->beacon); -#ifdef CONFIG_MAC80211_MESH - if (!sdata->u.mesh.mesh_id_len) + if (!bcn) goto out; -#endif if (ifmsh->sync_ops) ifmsh->sync_ops->adjust_tbtt( sdata); skb = dev_alloc_skb(local->tx_headroom + - hdr_len + - 2 + /* NULL SSID */ - 2 + 8 + /* supported rates */ - 2 + 3 + /* DS params */ + bcn->head_len + 256 + /* TIM IE */ - 2 + (IEEE80211_MAX_SUPP_RATES - 8) + - 2 + sizeof(struct ieee80211_ht_cap) + - 2 + sizeof(struct ieee80211_ht_operation) + - 2 + sdata->u.mesh.mesh_id_len + - 2 + sizeof(struct ieee80211_meshconf_ie) + - sdata->u.mesh.ie_len + - 2 + sizeof(__le16)); /* awake window */ + bcn->tail_len); if (!skb) goto out; - - skb_reserve(skb, local->hw.extra_tx_headroom); - mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); - memset(mgmt, 0, hdr_len); - mgmt->frame_control = - cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); - eth_broadcast_addr(mgmt->da); - memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); - memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); - ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); - mgmt->u.beacon.beacon_int = - cpu_to_le16(sdata->vif.bss_conf.beacon_int); - mgmt->u.beacon.capab_info |= cpu_to_le16( - sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); - - pos = skb_put(skb, 2); - *pos++ = WLAN_EID_SSID; - *pos++ = 0x0; - - band = chanctx_conf->def.chan->band; - - if (ieee80211_add_srates_ie(sdata, skb, true, band) || - mesh_add_ds_params_ie(skb, sdata) || - ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) || - ieee80211_add_ext_srates_ie(sdata, skb, true, band) || - mesh_add_rsn_ie(skb, sdata) || - mesh_add_ht_cap_ie(skb, sdata) || - mesh_add_ht_oper_ie(skb, sdata) || - mesh_add_meshid_ie(skb, sdata) || - mesh_add_meshconf_ie(skb, sdata) || - mesh_add_awake_window_ie(skb, sdata) || - mesh_add_vendor_ies(skb, sdata)) { - pr_err("o11s: couldn't add ies!\n"); - goto out; - } + skb_reserve(skb, local->tx_headroom); + memcpy(skb_put(skb, bcn->head_len), bcn->head, bcn->head_len); + ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb); + memcpy(skb_put(skb, bcn->tail_len), bcn->tail, bcn->tail_len); } else { WARN_ON(1); goto out; -- cgit v0.10.2 From 9fb04b501a57ad29fa989ab3cd2123482e7eac5f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 14 Feb 2013 11:20:14 -0800 Subject: mac80211: generate mesh probe responses Mesh interfaces will now respond to any broadcast (or matching directed mesh) probe requests with a probe response. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 6ff8ee9..a77d40e 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -868,6 +868,63 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sdata->u.mesh.timers_running = 0; } +static void +ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct sk_buff *presp; + struct beacon_data *bcn; + struct ieee80211_mgmt *hdr; + struct ieee802_11_elems elems; + size_t baselen; + u8 *pos, *end; + + end = ((u8 *) mgmt) + len; + pos = mgmt->u.probe_req.variable; + baselen = (u8 *) pos - (u8 *) mgmt; + if (baselen > len) + return; + + ieee802_11_parse_elems(pos, len - baselen, &elems); + + /* 802.11-2012 10.1.4.3.2 */ + if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && + !is_broadcast_ether_addr(mgmt->da)) || + elems.ssid_len != 0) + return; + + if (elems.mesh_id_len != 0 && + (elems.mesh_id_len != ifmsh->mesh_id_len || + memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len))) + return; + + rcu_read_lock(); + bcn = rcu_dereference(ifmsh->beacon); + + if (!bcn) + goto out; + + presp = dev_alloc_skb(local->tx_headroom + + bcn->head_len + bcn->tail_len); + if (!presp) + goto out; + + skb_reserve(presp, local->tx_headroom); + memcpy(skb_put(presp, bcn->head_len), bcn->head, bcn->head_len); + memcpy(skb_put(presp, bcn->tail_len), bcn->tail, bcn->tail_len); + hdr = (struct ieee80211_mgmt *) presp->data; + hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_PROBE_RESP); + memcpy(hdr->da, mgmt->sa, ETH_ALEN); + mpl_dbg(sdata, "sending probe resp. to %pM\n", hdr->da); + IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + ieee80211_tx_skb(sdata, presp); +out: + rcu_read_unlock(); +} + static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, u16 stype, struct ieee80211_mgmt *mgmt, @@ -957,6 +1014,9 @@ void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, rx_status); break; + case IEEE80211_STYPE_PROBE_REQ: + ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len); + break; case IEEE80211_STYPE_ACTION: ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); break; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 30f1ba6..296a4ae 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2718,8 +2718,9 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx) return RX_DROP_MONITOR; break; case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): - /* process only for ibss */ - if (sdata->vif.type != NL80211_IFTYPE_ADHOC) + /* process only for ibss and mesh */ + if (sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) return RX_DROP_MONITOR; break; default: -- cgit v0.10.2 From af0ed69badc67a0b6e976543f52029fce9ac8f69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 14:21:00 +0100 Subject: mac80211: stop modifying HT SMPS capability Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index f3b8e91..e8324b5 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -1183,8 +1183,7 @@ il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) == - WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 1f59860..4c9aafb 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -1830,32 +1830,30 @@ il_set_ht_add_station(struct il_priv *il, u8 idx, struct ieee80211_sta *sta) { struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; __le32 sta_flags; - u8 mimo_ps_mode; if (!sta || !sta_ht_inf->ht_supported) goto done; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; D_ASSOC("spatial multiplexing power save mode: %s\n", - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? "dynamic" : + (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" : + (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : "disabled"); sta_flags = il->stations[idx].sta.station_flags; sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: + switch (sta->smps_mode) { + case IEEE80211_SMPS_STATIC: sta_flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: + case IEEE80211_SMPS_DYNAMIC: sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_SM_PS_DISABLED: + case IEEE80211_SMPS_OFF: break; default: - IL_WARN("Invalid MIMO PS mode %d\n", mimo_ps_mode); + IL_WARN("Invalid MIMO PS mode %d\n", sta->smps_mode); break; } diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index b25de02..abe3042 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1289,8 +1289,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1345,8 +1344,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index 6deab38..d5faf74 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -196,7 +196,6 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, __le32 *flags, __le32 *mask) { struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; - u8 mimo_ps_mode; *mask = STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK | @@ -208,26 +207,24 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, if (!sta || !sta_ht_inf->ht_supported) return; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; - IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n", sta->addr, - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? + (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? + (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : "disabled"); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: + switch (sta->smps_mode) { + case IEEE80211_SMPS_STATIC: *flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: + case IEEE80211_SMPS_DYNAMIC: *flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_SM_PS_DISABLED: + case IEEE80211_SMPS_OFF: break; default: - IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode); + IWL_WARN(priv, "Invalid MIMO PS mode %d\n", sta->smps_mode); break; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 8ba36e5..56b636d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1229,8 +1229,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, if (!sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1282,8 +1281,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, if (!sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f35d85a..9503e69 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -343,10 +343,7 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, * when using more then one tx stream (>MCS7). */ if (sta && txdesc->u.ht.mcs > 7 && - ((sta->ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT) == - WLAN_HT_CAP_SM_PS_DYNAMIC) + sta->smps_mode == IEEE80211_SMPS_DYNAMIC) __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); } else { txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 54e2add..f7eba13 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1245,6 +1245,7 @@ enum ieee80211_sta_rx_bandwidth { * station can receive at the moment, changed by operating mode * notifications and capabilities. The value is only valid after * the station moves to associated state. + * @smps_mode: current SMPS mode (off, static or dynamic) */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1257,6 +1258,7 @@ struct ieee80211_sta { u8 max_sp; u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; + enum ieee80211_smps_mode smps_mode; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index b84147a..0db25d4 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -102,6 +102,7 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, int i, max_tx_streams; bool changed; enum ieee80211_sta_rx_bandwidth bw; + enum ieee80211_smps_mode smps_mode; memset(&ht_cap, 0, sizeof(ht_cap)); @@ -216,6 +217,24 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS) + >> IEEE80211_HT_CAP_SM_PS_SHIFT) { + case WLAN_HT_CAP_SM_PS_INVALID: + case WLAN_HT_CAP_SM_PS_STATIC: + smps_mode = IEEE80211_SMPS_STATIC; + break; + case WLAN_HT_CAP_SM_PS_DYNAMIC: + smps_mode = IEEE80211_SMPS_DYNAMIC; + break; + case WLAN_HT_CAP_SM_PS_DISABLED: + smps_mode = IEEE80211_SMPS_OFF; + break; + } + + if (smps_mode != sta->sta.smps_mode) + changed = true; + sta->sta.smps_mode = smps_mode; + return changed; } diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6176c71..3af141c 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -808,7 +808,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, int ack_dur; int stbc; int i; - unsigned int smps; /* fall back to the old minstrel for legacy stations */ if (!sta->ht_cap.ht_supported) @@ -844,9 +843,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, if (sta_cap & IEEE80211_HT_CAP_LDPC_CODING) mi->tx_flags |= IEEE80211_TX_CTL_LDPC; - smps = (sta_cap & IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT; - for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { @@ -869,7 +865,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ - if (smps == WLAN_HT_CAP_SM_PS_STATIC && + if (sta->smps_mode == IEEE80211_SMPS_STATIC && minstrel_mcs_groups[i].streams > 1) continue; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 296a4ae..3acb70b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2375,31 +2375,27 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) switch (mgmt->u.action.u.ht_smps.action) { case WLAN_HT_ACTION_SMPS: { struct ieee80211_supported_band *sband; - u8 smps; + enum ieee80211_smps_mode smps_mode; /* convert to HT capability */ switch (mgmt->u.action.u.ht_smps.smps_control) { case WLAN_HT_SMPS_CONTROL_DISABLED: - smps = WLAN_HT_CAP_SM_PS_DISABLED; + smps_mode = IEEE80211_SMPS_OFF; break; case WLAN_HT_SMPS_CONTROL_STATIC: - smps = WLAN_HT_CAP_SM_PS_STATIC; + smps_mode = IEEE80211_SMPS_STATIC; break; case WLAN_HT_SMPS_CONTROL_DYNAMIC: - smps = WLAN_HT_CAP_SM_PS_DYNAMIC; + smps_mode = IEEE80211_SMPS_DYNAMIC; break; default: goto invalid; } - smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; /* if no change do nothing */ - if ((rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) == smps) + if (rx->sta->sta.smps_mode == smps_mode) goto handled; - - rx->sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS; - rx->sta->sta.ht_cap.cap |= smps; + rx->sta->sta.smps_mode = smps_mode; sband = rx->local->hw.wiphy->bands[status->band]; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 0794b90..a79ce82 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -375,6 +375,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, for (i = 0; i < IEEE80211_NUM_TIDS; i++) sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); + sta->sta.smps_mode = IEEE80211_SMPS_OFF; + sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); return sta; -- cgit v0.10.2 From a50df0c4c0d97170a6c43573612acacc43e62fe7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:20:05 +0100 Subject: cfg80211: advertise extended capabilities to userspace In many cases, userspace may need to know which of the 802.11 extended capabilities ("Extended Capabilities element") are implemented in the driver or device, to include them e.g. in beacons, assoc request/response or other frames. Add a new nl80211 attribute to hold the extended capabilities bitmap for this. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8a9200f..a229046 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2480,6 +2480,14 @@ struct wiphy_wowlan_support { * * @max_acl_mac_addrs: Maximum number of MAC addresses that the device * supports for ACL. + * + * @extended_capabilities: extended capabilities supported by the driver, + * additional capabilities might be supported by userspace; these are + * the 802.11 extended capabilities ("Extended Capabilities element") + * and are in the same format as in the information element. See + * 802.11-2012 8.4.2.29 for the defined fields. + * @extended_capabilities_mask: mask of the valid values + * @extended_capabilities_len: length of the extended capabilities */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2546,6 +2554,9 @@ struct wiphy { */ u32 probe_resp_offload; + const u8 *extended_capabilities, *extended_capabilities_mask; + u8 extended_capabilities_len; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3880f6a..1fd6e561 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1355,6 +1355,12 @@ enum nl80211_commands { * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, * contains a value of enum nl80211_radar_event (u32). * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1635,6 +1641,9 @@ enum nl80211_attrs { NL80211_ATTR_RADAR_EVENT, + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7e40b9e..1237431 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1363,6 +1363,15 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.max_acl_mac_addrs)) goto nla_put_failure; + if (dev->wiphy.extended_capabilities && + (nla_put(msg, NL80211_ATTR_EXT_CAPA, + dev->wiphy.extended_capabilities_len, + dev->wiphy.extended_capabilities) || + nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK, + dev->wiphy.extended_capabilities_len, + dev->wiphy.extended_capabilities_mask))) + goto nla_put_failure; + return genlmsg_end(msg, hdr); nla_put_failure: -- cgit v0.10.2 From c6f9d6c3bdeb337809d667ef2a41597229a1ce57 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:27:08 +0100 Subject: mac80211: advertise operating mode notification capability Use the new extended capabilities advertising to advertise the fact that operating mode notification is supported. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e085fcf..7e24fe0 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1776,6 +1776,8 @@ enum ieee80211_tdls_actioncode { #define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) #define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) +#define WLAN_EXT_CAPA8_OPMODE_NOTIF BIT(6) + /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 9cdbc77..035344b 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -501,6 +501,11 @@ static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { }, }; +static const u8 extended_capabilities[] = { + 0, 0, 0, 0, 0, 0, 0, + WLAN_EXT_CAPA8_OPMODE_NOTIF, +}; + struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops) { @@ -557,6 +562,10 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, WIPHY_FLAG_REPORTS_OBSS | WIPHY_FLAG_OFFCHAN_TX; + wiphy->extended_capabilities = extended_capabilities; + wiphy->extended_capabilities_mask = extended_capabilities; + wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities); + if (ops->remain_on_channel) wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; -- cgit v0.10.2 From 9d62a98617298c1da288f50e84c5dd67732e79b7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:13 +0200 Subject: cfg80211: Pass station (extended) capability info to kernel The information of the peer's capabilities and extended capabilities are required for the driver to perform TDLS Peer UAPSD operations and off channel operations. This information of the peer is passed from user space using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass the capability information of the peer to the driver. Similarly, there may be need for capability information for other modes, so allow this to be provided with both add_station and change_station. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a229046..fa26129 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -626,12 +626,14 @@ enum plink_actions { /** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. */ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), + STATION_PARAM_APPLY_CAPABILITY = BIT(1), }; /** @@ -662,6 +664,9 @@ enum station_parameters_apply_mask { * see &enum station_parameters_apply_mask * @local_pm: local link-specific mesh power save mode (no change when set * to unknown) + * @capability: station capability + * @ext_capab: extended capabilities of the station + * @ext_capab_len: number of extended capabilities */ struct station_parameters { u8 *supported_rates; @@ -678,6 +683,9 @@ struct station_parameters { u8 uapsd_queues; u8 max_sp; enum nl80211_mesh_power_mode local_pm; + u16 capability; + u8 *ext_capab; + u8 ext_capab_len; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1fd6e561..f7c35ca 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1361,6 +1361,13 @@ enum nl80211_commands { * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1644,6 +1651,9 @@ enum nl80211_attrs { NL80211_ATTR_EXT_CAPA, NL80211_ATTR_EXT_CAPA_MASK, + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1237431..be9f2b5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -368,6 +368,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 }, [NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 }, [NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED }, + [NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 }, + [NL80211_ATTR_STA_EXT_CAPABILITY] = { .type = NLA_BINARY, }, }; /* policy for the key attributes */ @@ -3435,6 +3437,19 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]); } + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) { + params.capability = + nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]); + params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY; + } + + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) { + params.ext_capab = + nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + params.ext_capab_len = + nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + } + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || info->attrs[NL80211_ATTR_HT_CAPABILITY]) return -EINVAL; @@ -3505,6 +3520,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* reject other things that can't change */ if (params.supported_rates) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) + return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) + return -EINVAL; /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); @@ -3537,6 +3556,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (params.supported_rates) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) + return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) + return -EINVAL; /* * No special handling for TDLS here -- the userspace * mesh code doesn't have this bug. @@ -3601,6 +3624,19 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) if (!params.aid || params.aid > IEEE80211_MAX_AID) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) { + params.capability = + nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]); + params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY; + } + + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) { + params.ext_capab = + nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + params.ext_capab_len = + nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + } + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) params.ht_capa = nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); -- cgit v0.10.2 From df881293c6ba9a12868491a717b25cb14ec1fa4a Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:54 +0200 Subject: cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_station The information of the peer's capabilities is required for the driver to perform TDLS Peer UAPSD operations. This information of the peer is passed by the supplicant using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass this information of the peer to the driver in case this command is used with the TDLS peer STA. In addition, make the HT/VHT capability configuration handled more consistently for other STA cases (reject both instead of just HT). Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0800fb3..179dcbd 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1412,9 +1412,11 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -ENOENT; } - /* in station mode, supported rates are only valid with TDLS */ + /* in station mode, some updates are only valid with TDLS */ if (sdata->vif.type == NL80211_IFTYPE_STATION && - params->supported_rates && + (params->supported_rates || params->ht_capa || params->vht_capa || + params->sta_modify_mask || + (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) && !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { mutex_unlock(&local->sta_mtx); return -EINVAL; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index be9f2b5..580ffea 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3409,6 +3409,63 @@ static struct net_device *get_vlan(struct genl_info *info, return ERR_PTR(ret); } +static struct nla_policy +nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { + [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 }, + [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 }, +}; + +static int nl80211_set_station_tdls(struct genl_info *info, + struct station_parameters *params) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct nlattr *tb[NL80211_STA_WME_MAX + 1]; + struct nlattr *nla; + int err; + + /* Can only set if TDLS ... */ + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS)) + return -EOPNOTSUPP; + + /* ... with external setup is supported */ + if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)) + return -EOPNOTSUPP; + + /* Dummy STA entry gets updated once the peer capabilities are known */ + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) + params->ht_capa = + nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + params->vht_capa = + nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]); + + /* parse WME attributes if present */ + if (!info->attrs[NL80211_ATTR_STA_WME]) + return 0; + + nla = info->attrs[NL80211_ATTR_STA_WME]; + err = nla_parse_nested(tb, NL80211_STA_WME_MAX, nla, + nl80211_sta_wme_policy); + if (err) + return err; + + if (tb[NL80211_STA_WME_UAPSD_QUEUES]) + params->uapsd_queues = nla_get_u8( + tb[NL80211_STA_WME_UAPSD_QUEUES]); + if (params->uapsd_queues & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK) + return -EINVAL; + + if (tb[NL80211_STA_WME_MAX_SP]) + params->max_sp = nla_get_u8(tb[NL80211_STA_WME_MAX_SP]); + + if (params->max_sp & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK) + return -EINVAL; + + params->sta_modify_mask |= STATION_PARAM_APPLY_UAPSD; + + return 0; +} + static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -3450,8 +3507,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); } - if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || - info->attrs[NL80211_ATTR_HT_CAPABILITY]) + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]) return -EINVAL; if (!rdev->ops->change_station) @@ -3524,6 +3580,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); @@ -3539,13 +3598,29 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) * to change the flag. */ params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); - /* fall through */ + /* Include parameters for TDLS peer (driver will check) */ + err = nl80211_set_station_tdls(info, ¶ms); + if (err) + return err; + /* disallow things sta doesn't support */ + if (params.plink_action) + return -EINVAL; + if (params.local_pm) + return -EINVAL; + /* reject any changes other than AUTHORIZED or WME (for TDLS) */ + if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) | + BIT(NL80211_STA_FLAG_WME))) + return -EINVAL; + break; case NL80211_IFTYPE_ADHOC: /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; if (params.local_pm) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3560,6 +3635,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* * No special handling for TDLS here -- the userspace * mesh code doesn't have this bug. @@ -3584,12 +3662,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return err; } -static struct nla_policy -nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { - [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 }, - [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 }, -}; - static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; -- cgit v0.10.2 From 932dd97c5fef091dd6f605fb1d40143d67d91e09 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 11:56:13 +0100 Subject: nl80211: renumber NL80211_FEATURE_FULL_AP_CLIENT_STATE Adding the flag to mac80211 already without testing was clearly a mistake, one that we now pay for by having to reserve bit 13 forever. The problem is cfg80211 doesn't allow capability/rate changes for station entries that were added unassociated, so the station entries cannot be set up properly when marked associated. Change the NL80211_FEATURE_FULL_AP_CLIENT_STATE value to make it clear to userspace implementations that all current kernels don't actually support it, even though the previous bit is set, and of course also remove the flag from mac80211 until we test and fix the issues. Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f7c35ca..c46bb01 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3471,8 +3471,9 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, - NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, + /* bit 13 is reserved */ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, }; /** diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 035344b..f974768 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -572,8 +572,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | NL80211_FEATURE_SAE | NL80211_FEATURE_HT_IBSS | - NL80211_FEATURE_VIF_TXPOWER | - NL80211_FEATURE_FULL_AP_CLIENT_STATE; + NL80211_FEATURE_VIF_TXPOWER; if (!ops->hw_scan) wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | -- cgit v0.10.2 From 586e01ededf9b713a1512dd658806791a7ca1a50 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 12:13:53 +0100 Subject: mac80211: prevent spurious HT/VHT downgrade message Even when connecting to an AP that doesn't support VHT, and even when the local device doesn't support it either, the downgrade message gets printed. Suppress the message if HT and/or VHT is disabled. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7a8cd78..9f6464f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -357,6 +357,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, ret = 0; out: + /* don't print the message below for VHT mismatch if VHT is disabled */ + if (ret & IEEE80211_STA_DISABLE_VHT) + vht_chandef = *chandef; + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, IEEE80211_CHAN_DISABLED)) { if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { -- cgit v0.10.2 From 93c78c5debeb9c7101ecc73347d4730c26a98c05 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Fri, 15 Feb 2013 00:03:14 +0100 Subject: mac80211_hwsim: ask mac80211 to reserve space for chanctx.drv_priv Otherwise memory corruption occurs when using channel contexts (ATM when param 'channel' > 1). Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b73e497..cffdf4f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2247,6 +2247,7 @@ static int __init init_mac80211_hwsim(void) /* ask mac80211 to reserve space for magic */ hw->vif_data_size = sizeof(struct hwsim_vif_priv); hw->sta_data_size = sizeof(struct hwsim_sta_priv); + hw->chanctx_data_size = sizeof(struct hwsim_chanctx_priv); memcpy(data->channels_2ghz, hwsim_channels_2ghz, sizeof(hwsim_channels_2ghz)); -- cgit v0.10.2 From 74e238eada573540f82530f8ae4f3343c023d774 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 2 Feb 2013 05:07:11 +0000 Subject: igb: Support using build_skb in the case that jumbo frames are disabled This change makes it so that we can enable the use of build_skb for cases where jumbo frames are disabled. The advantage to this is that we do not have to perform a memcpy to populate the header and as a result we see a significant performance improvement. Signed-off-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 4b78053..afdb8bb 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -275,10 +275,18 @@ struct igb_q_vector { enum e1000_ring_flags_t { IGB_RING_FLAG_RX_SCTP_CSUM, IGB_RING_FLAG_RX_LB_VLAN_BSWAP, + IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, IGB_RING_FLAG_TX_CTX_IDX, IGB_RING_FLAG_TX_DETECT_HANG }; +#define ring_uses_build_skb(ring) \ + test_bit(IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, &(ring)->flags) +#define set_ring_build_skb_enabled(ring) \ + set_bit(IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, &(ring)->flags) +#define clear_ring_build_skb_enabled(ring) \ + clear_bit(IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, &(ring)->flags) + #define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS) #define IGB_RX_DESC(R, i) \ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 1aaf193..b070a97 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3354,6 +3354,20 @@ void igb_configure_rx_ring(struct igb_adapter *adapter, wr32(E1000_RXDCTL(reg_idx), rxdctl); } +static void igb_set_rx_buffer_len(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ +#define IGB_MAX_BUILD_SKB_SIZE \ + (SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) - \ + (NET_SKB_PAD + NET_IP_ALIGN + IGB_TS_HDR_LEN)) + + /* set build_skb flag */ + if (adapter->max_frame_size <= IGB_MAX_BUILD_SKB_SIZE) + set_ring_build_skb_enabled(rx_ring); + else + clear_ring_build_skb_enabled(rx_ring); +} + /** * igb_configure_rx - Configure receive Unit after Reset * @adapter: board private structure @@ -3373,8 +3387,11 @@ static void igb_configure_rx(struct igb_adapter *adapter) /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ - for (i = 0; i < adapter->num_rx_queues; i++) - igb_configure_rx_ring(adapter, adapter->rx_ring[i]); + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *rx_ring = adapter->rx_ring[i]; + igb_set_rx_buffer_len(adapter, rx_ring); + igb_configure_rx_ring(adapter, rx_ring); + } } /** @@ -6097,6 +6114,41 @@ static void igb_reuse_rx_page(struct igb_ring *rx_ring, DMA_FROM_DEVICE); } +static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, + struct page *page, + unsigned int truesize) +{ + /* avoid re-using remote pages */ + if (unlikely(page_to_nid(page) != numa_node_id())) + return false; + +#if (PAGE_SIZE < 8192) + /* if we are only owner of page we can reuse it */ + if (unlikely(page_count(page) != 1)) + return false; + + /* flip page offset to other buffer */ + rx_buffer->page_offset ^= IGB_RX_BUFSZ; + + /* since we are the only owner of the page and we need to + * increment it, just set the value to 2 in order to avoid + * an unnecessary locked operation + */ + atomic_set(&page->_count, 2); +#else + /* move offset up to the next cache line */ + rx_buffer->page_offset += truesize; + + if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) + return false; + + /* bump ref count on page before it is given to the stack */ + get_page(page); +#endif + + return true; +} + /** * igb_add_rx_frag - Add contents of Rx buffer to sk_buff * @rx_ring: rx descriptor ring to transact packets on @@ -6119,6 +6171,11 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring, { struct page *page = rx_buffer->page; unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); +#if (PAGE_SIZE < 8192) + unsigned int truesize = IGB_RX_BUFSZ; +#else + unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); +#endif if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { unsigned char *va = page_address(page) + rx_buffer->page_offset; @@ -6141,38 +6198,88 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring, } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - rx_buffer->page_offset, size, IGB_RX_BUFSZ); + rx_buffer->page_offset, size, truesize); - /* avoid re-using remote pages */ - if (unlikely(page_to_nid(page) != numa_node_id())) - return false; + return igb_can_reuse_rx_page(rx_buffer, page, truesize); +} +static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc) +{ + struct igb_rx_buffer *rx_buffer; + struct sk_buff *skb; + struct page *page; + void *page_addr; + unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); #if (PAGE_SIZE < 8192) - /* if we are only owner of page we can reuse it */ - if (unlikely(page_count(page) != 1)) - return false; + unsigned int truesize = IGB_RX_BUFSZ; +#else + unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + + SKB_DATA_ALIGN(NET_SKB_PAD + + NET_IP_ALIGN + + size); +#endif - /* flip page offset to other buffer */ - rx_buffer->page_offset ^= IGB_RX_BUFSZ; + /* If we spanned a buffer we have a huge mess so test for it */ + BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))); - /* - * since we are the only owner of the page and we need to - * increment it, just set the value to 2 in order to avoid - * an unnecessary locked operation - */ - atomic_set(&page->_count, 2); -#else - /* move offset up to the next cache line */ - rx_buffer->page_offset += SKB_DATA_ALIGN(size); + /* Guarantee this function can be used by verifying buffer sizes */ + BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD + + NET_IP_ALIGN + + IGB_TS_HDR_LEN + + ETH_FRAME_LEN + + ETH_FCS_LEN)); - if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) - return false; + rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; + page = rx_buffer->page; + prefetchw(page); - /* bump ref count on page before it is given to the stack */ - get_page(page); + page_addr = page_address(page) + rx_buffer->page_offset; + + /* prefetch first cache line of first page */ + prefetch(page_addr + NET_SKB_PAD + NET_IP_ALIGN); +#if L1_CACHE_BYTES < 128 + prefetch(page_addr + L1_CACHE_BYTES + NET_SKB_PAD + NET_IP_ALIGN); #endif - return true; + /* build an skb to around the page buffer */ + skb = build_skb(page_addr, truesize); + if (unlikely(!skb)) { + rx_ring->rx_stats.alloc_failed++; + return NULL; + } + + /* we are reusing so sync this buffer for CPU use */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_buffer->dma, + rx_buffer->page_offset, + IGB_RX_BUFSZ, + DMA_FROM_DEVICE); + + /* update pointers within the skb to store the data */ + skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); + __skb_put(skb, size); + + /* pull timestamp out of packet data */ + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { + igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb); + __skb_pull(skb, IGB_TS_HDR_LEN); + } + + if (igb_can_reuse_rx_page(rx_buffer, page, truesize)) { + /* hand second half of page back to the ring */ + igb_reuse_rx_page(rx_ring, rx_buffer); + } else { + /* we are not reusing the buffer so unmap it */ + dma_unmap_page(rx_ring->dev, rx_buffer->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + } + + /* clear contents of buffer_info */ + rx_buffer->dma = 0; + rx_buffer->page = NULL; + + return skb; } static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, @@ -6184,13 +6291,6 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; - /* - * This memory barrier is needed to keep us from reading - * any other fields out of the rx_desc until we know the - * RXD_STAT_DD bit is set - */ - rmb(); - page = rx_buffer->page; prefetchw(page); @@ -6590,8 +6690,17 @@ static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget) if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) break; + /* This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STAT_DD bit is set + */ + rmb(); + /* retrieve a buffer from the ring */ - skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); + if (ring_uses_build_skb(rx_ring)) + skb = igb_build_rx_buffer(rx_ring, rx_desc); + else + skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); /* exit if we failed to retrieve a buffer */ if (!skb) @@ -6678,6 +6787,14 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, return true; } +static inline unsigned int igb_rx_offset(struct igb_ring *rx_ring) +{ + if (ring_uses_build_skb(rx_ring)) + return NET_SKB_PAD + NET_IP_ALIGN; + else + return 0; +} + /** * igb_alloc_rx_buffers - Replace used receive buffers; packet split * @adapter: address of board private structure @@ -6704,7 +6821,9 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) * Refresh the desc even if buffer_addrs didn't change * because each write-back erases this info. */ - rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + + bi->page_offset + + igb_rx_offset(rx_ring)); rx_desc++; bi++; -- cgit v0.10.2 From d3f8ef1169afb08976b4b1dafe7bc740f655d886 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 23 Jan 2013 03:37:58 +0000 Subject: igb: Fix for improper exit in igb_get_i2c_client This patch fixes an issue where we check for irq's disabled then exit after explicitly disabling them with spin_lock_irqsave. Reported-by: Dan Carpenter Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index b070a97..d84f28c 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7750,12 +7750,7 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) } } - /* no client_list found, create a new one as long as - * irqs are not disabled - */ - if (unlikely(irqs_disabled())) - goto exit; - + /* no client_list found, create a new one */ client_list = kzalloc(sizeof(*client_list), GFP_KERNEL); if (client_list == NULL) goto exit; -- cgit v0.10.2 From 199f6ccac11e93761ee24e35c621992c078fe76f Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 23 Jan 2013 03:43:01 +0000 Subject: igb: Fix for improper allocation flag in igb_get_i2c_client This patch fixes the allocation function in igb_get_i2c_client to use GFP_ATOMIC instead of GFP_KERNEL because we have a spinlock. Reported-by: Dan Carpenter Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index d84f28c..c19a35c 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7751,7 +7751,7 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) } /* no client_list found, create a new one */ - client_list = kzalloc(sizeof(*client_list), GFP_KERNEL); + client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC); if (client_list == NULL) goto exit; -- cgit v0.10.2 From 2c7d7724bc5b12a8bc038880d2dfe8ea496c618d Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Thu, 14 Feb 2013 03:28:19 +0000 Subject: igb: Refix sparse warning in igb_get_i2c_client This patch correctly resolves the sparse warnings found with this function. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index c19a35c..bf55972 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7727,7 +7727,7 @@ static DEFINE_SPINLOCK(i2c_clients_lock); * @adapter: adapter struct * @dev_addr: device address of i2c needed. */ -struct i2c_client * +static struct i2c_client * igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) { ulong flags; -- cgit v0.10.2 From 21ba6fe19370f8008d1edd9aedd6dadd7e3fa8f8 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 9 Feb 2013 04:27:48 +0000 Subject: igb: Update igb to use a path similar to ixgbe to determine when to stop Tx After reviewing the igb and ixgbe code I realized there are a few issues in how the code is structured. Specifically we are not checking the size of the buffers being used in transmits and we are not using the same value to determine when to stop or start a Tx queue. As such the code is prone to be buggy. This patch makes it so that we have one value DESC_NEEDED that we will use for starting and stopping the queue. In addition we will check the size of buffers being used when setting up a transmit so as to avoid a possible buffer overrun if we were to receive a frame with a block of data larger than 32K in skb->data. Signed-off-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index afdb8bb..d27edbc 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -139,8 +139,6 @@ struct vf_data_storage { #define IGB_RX_HDR_LEN IGB_RXBUFFER_256 #define IGB_RX_BUFSZ IGB_RXBUFFER_2048 -/* How many Tx Descriptors do we need to call netif_wake_queue ? */ -#define IGB_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ @@ -169,6 +167,17 @@ enum igb_tx_flags { #define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 #define IGB_TX_FLAGS_VLAN_SHIFT 16 +/* + * The largest size we can write to the descriptor is 65535. In order to + * maintain a power of two alignment we have to limit ourselves to 32K. + */ +#define IGB_MAX_TXD_PWR 15 +#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD) +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) + /* wrapper around a pointer to a socket buffer, * so a DMA handle can be stored along with the buffer */ struct igb_tx_buffer { diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index bf55972..ed79a1c 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4434,13 +4434,6 @@ static void igb_tx_olinfo_status(struct igb_ring *tx_ring, tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); } -/* - * The largest size we can write to the descriptor is 65535. In order to - * maintain a power of two alignment we have to limit ourselves to 32K. - */ -#define IGB_MAX_TXD_PWR 15 -#define IGB_MAX_DATA_PER_TXD (1<data, * + 1 desc for context descriptor, - * otherwise try next time */ - if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) { + * otherwise try next time + */ + if (NETDEV_FRAG_PAGE_MAX_SIZE > IGB_MAX_DATA_PER_TXD) { + unsigned short f; + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); + } else { + count += skb_shinfo(skb)->nr_frags; + } + + if (igb_maybe_stop_tx(tx_ring, count + 3)) { /* this is a hard error */ return NETDEV_TX_BUSY; } @@ -4659,7 +4662,7 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, igb_tx_map(tx_ring, first, hdr_len); /* Make sure there is space in the ring for the next send. */ - igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4); + igb_maybe_stop_tx(tx_ring, DESC_NEEDED); return NETDEV_TX_OK; @@ -6063,9 +6066,10 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) } } +#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && - igb_desc_unused(tx_ring) >= IGB_TX_QUEUE_WAKE)) { + igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ -- cgit v0.10.2 From 73bfcd9a2d38cc4b0a482ce8cbdf67b0fc85aa46 Mon Sep 17 00:00:00 2001 From: "Akeem G. Abodunrin" Date: Tue, 29 Jan 2013 10:14:55 +0000 Subject: igb: Initialize PHY function pointers This patch initializes PHY function pointers for device configuration. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 54a7c20..fc69414 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -111,6 +111,118 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw) return ext_mdio; } +/** + * igb_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_phy_params_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u32 ctrl_ext; + + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; + } + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + ctrl_ext = rd32(E1000_CTRL_EXT); + + if (igb_sgmii_active_82575(hw)) { + phy->ops.reset = igb_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = igb_phy_hw_reset; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; + } + + wr32(E1000_CTRL_EXT, ctrl_ext); + igb_reset_mdicnfg_82580(hw); + + if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; + phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + phy->ops.read_reg = igb_read_phy_reg_82580; + phy->ops.write_reg = igb_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = igb_read_phy_reg_gs40g; + phy->ops.write_reg = igb_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = igb_read_phy_reg_igp; + phy->ops.write_reg = igb_write_phy_reg_igp; + } + } + + /* set lan id */ + hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> + E1000_STATUS_FUNC_SHIFT; + + /* Set phy->phy_addr and phy->id. */ + ret_val = igb_get_phy_id_82575(hw); + if (ret_val) + return ret_val; + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID) + phy->ops.get_cable_length = + igb_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = igb_get_cable_length_m88; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + break; + case IGP03E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.get_phy_info = igb_get_phy_info_igp; + phy->ops.get_cable_length = igb_get_cable_length_igp_2; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; + break; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.force_speed_duplex = + igb_phy_force_speed_duplex_82580; + phy->ops.get_cable_length = igb_get_cable_length_82580; + phy->ops.get_phy_info = igb_get_phy_info_82580; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + break; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = igb_check_polarity_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + static s32 igb_get_invariants_82575(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; -- cgit v0.10.2 From 56d8c27f6f406f2d232caedb1e60f28eafc8c9d7 Mon Sep 17 00:00:00 2001 From: "Akeem G. Abodunrin" Date: Tue, 29 Jan 2013 10:15:00 +0000 Subject: igb: Initialize NVM function pointers This patch initializes NVM function pointers for device configuration. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index fc69414..e59fc9b 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -223,6 +223,115 @@ out: return ret_val; } +/** + * igb_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 igb_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + u16 size; + + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + /* Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported + */ + if (size > 15) + size = 15; + + nvm->word_size = 1 << size; + if (hw->mac.type < e1000_i210) { + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; + break; + } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; + + nvm->type = e1000_nvm_eeprom_spi; + } else { + nvm->type = e1000_nvm_flash_hw; + } + + /* NVM Function Pointers */ + switch (hw->mac.type) { + case e1000_82580: + nvm->ops.validate = igb_validate_nvm_checksum_82580; + nvm->ops.update = igb_update_nvm_checksum_82580; + nvm->ops.acquire = igb_acquire_nvm_82575; + nvm->ops.release = igb_release_nvm_82575; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = igb_read_nvm_eerd; + else + nvm->ops.read = igb_read_nvm_spi; + nvm->ops.write = igb_write_nvm_spi; + break; + case e1000_i350: + nvm->ops.validate = igb_validate_nvm_checksum_i350; + nvm->ops.update = igb_update_nvm_checksum_i350; + nvm->ops.acquire = igb_acquire_nvm_82575; + nvm->ops.release = igb_release_nvm_82575; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = igb_read_nvm_eerd; + else + nvm->ops.read = igb_read_nvm_spi; + nvm->ops.write = igb_write_nvm_spi; + break; + case e1000_i210: + nvm->ops.validate = igb_validate_nvm_checksum_i210; + nvm->ops.update = igb_update_nvm_checksum_i210; + nvm->ops.acquire = igb_acquire_nvm_i210; + nvm->ops.release = igb_release_nvm_i210; + nvm->ops.read = igb_read_nvm_srrd_i210; + nvm->ops.write = igb_write_nvm_srwr_i210; + nvm->ops.valid_led_default = igb_valid_led_default_i210; + break; + case e1000_i211: + nvm->ops.acquire = igb_acquire_nvm_i210; + nvm->ops.release = igb_release_nvm_i210; + nvm->ops.read = igb_read_nvm_i211; + nvm->ops.valid_led_default = igb_valid_led_default_i210; + nvm->ops.validate = NULL; + nvm->ops.update = NULL; + nvm->ops.write = NULL; + break; + default: + nvm->ops.validate = igb_validate_nvm_checksum; + nvm->ops.update = igb_update_nvm_checksum; + nvm->ops.acquire = igb_acquire_nvm_82575; + nvm->ops.release = igb_release_nvm_82575; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = igb_read_nvm_eerd; + else + nvm->ops.read = igb_read_nvm_spi; + nvm->ops.write = igb_write_nvm_spi; + break; + } + + return 0; +} + static s32 igb_get_invariants_82575(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; -- cgit v0.10.2 From a1bf1f44c6ee3ddf803063692a2f1d5ed483efdc Mon Sep 17 00:00:00 2001 From: "Akeem G. Abodunrin" Date: Tue, 29 Jan 2013 10:15:05 +0000 Subject: igb: Intialize MAC function pointers This patch initializes MAC function pointers for device configuration. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index e59fc9b..8604013 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -332,6 +332,67 @@ s32 igb_init_nvm_params_82575(struct e1000_hw *hw) return 0; } +/** + * igb_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set rar entry count */ + switch (mac->type) { + case e1000_82576: + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + break; + case e1000_82580: + mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + break; + case e1000_i350: + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; + break; + default: + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + break; + } + /* reset */ + if (mac->type >= e1000_82580) + mac->ops.reset_hw = igb_reset_hw_82580; + else + mac->ops.reset_hw = igb_reset_hw_82575; + + if (mac->type >= e1000_i210) { + mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; + mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; + + } else { + mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; + mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; + } + + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = true; + /* Set if manageability features are enabled. */ + mac->arc_subsystem_valid = + (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; + /* enable EEE on i350 parts and later parts */ + if (mac->type >= e1000_i350) + dev_spec->eee_disable = false; + else + dev_spec->eee_disable = true; + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? igb_setup_copper_link_82575 + : igb_setup_serdes_link_82575; + + return 0; +} + static s32 igb_get_invariants_82575(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; -- cgit v0.10.2 From a6053d76bd893a8bd7ecb8681d85b35cd4b45936 Mon Sep 17 00:00:00 2001 From: "Akeem G. Abodunrin" Date: Tue, 29 Jan 2013 10:15:10 +0000 Subject: igb: Refractoring function pointers in igb_get_invariants function This patch simplifies igb_get_invariants function by moving all implemented function pointers in this function to individual separate functions, based on their functionalities, this would make debugging much easier. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 8604013..84e7e09 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -395,13 +395,9 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw) static s32 igb_get_invariants_82575(struct e1000_hw *hw) { - struct e1000_phy_info *phy = &hw->phy; - struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_mac_info *mac = &hw->mac; struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575; - u32 eecd; s32 ret_val; - u16 size; u32 ctrl_ext = 0; switch (hw->device_id) { @@ -462,7 +458,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) * SerDes mode on the 82575. There can be an external PHY attached * on the SGMII interface. For this, we'll set sgmii_active to true. */ - phy->media_type = e1000_media_type_copper; + hw->phy.media_type = e1000_media_type_copper; dev_spec->sgmii_active = false; ctrl_ext = rd32(E1000_CTRL_EXT); @@ -478,154 +474,15 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) break; } - /* Set mta register count */ - mac->mta_reg_count = 128; - /* Set rar entry count */ - switch (mac->type) { - case e1000_82576: - mac->rar_entry_count = E1000_RAR_ENTRIES_82576; - break; - case e1000_82580: - mac->rar_entry_count = E1000_RAR_ENTRIES_82580; - break; - case e1000_i350: - mac->rar_entry_count = E1000_RAR_ENTRIES_I350; - break; - default: - mac->rar_entry_count = E1000_RAR_ENTRIES_82575; - break; - } - /* reset */ - if (mac->type >= e1000_82580) - mac->ops.reset_hw = igb_reset_hw_82580; - else - mac->ops.reset_hw = igb_reset_hw_82575; - - if (mac->type >= e1000_i210) { - mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; - mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; - } else { - mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; - mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; - } - - /* Set if part includes ASF firmware */ - mac->asf_firmware_present = true; - /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = - (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) - ? true : false; - /* enable EEE on i350 parts and later parts */ - if (mac->type >= e1000_i350) - dev_spec->eee_disable = false; - else - dev_spec->eee_disable = true; - /* physical interface link setup */ - mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) - ? igb_setup_copper_link_82575 - : igb_setup_serdes_link_82575; + /* mac initialization and operations */ + ret_val = igb_init_mac_params_82575(hw); + if (ret_val) + goto out; /* NVM initialization */ - eecd = rd32(E1000_EECD); - size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); - - /* - * Added to a constant, "size" becomes the left-shift value - * for setting word_size. - */ - size += NVM_WORD_SIZE_BASE_SHIFT; - - /* - * Check for invalid size - */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); - size = 15; - } - - nvm->word_size = 1 << size; - if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; - switch (nvm->override) { - case e1000_nvm_override_spi_large: - nvm->page_size = 32; - nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: - nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: - nvm->page_size = eecd - & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd - & E1000_EECD_ADDR_BITS ? 16 : 8; - break; - } - if (nvm->word_size == (1 << 15)) - nvm->page_size = 128; - - nvm->type = e1000_nvm_eeprom_spi; - } else - nvm->type = e1000_nvm_flash_hw; - - /* NVM Function Pointers */ - switch (hw->mac.type) { - case e1000_82580: - nvm->ops.validate = igb_validate_nvm_checksum_82580; - nvm->ops.update = igb_update_nvm_checksum_82580; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; - break; - case e1000_i350: - nvm->ops.validate = igb_validate_nvm_checksum_i350; - nvm->ops.update = igb_update_nvm_checksum_i350; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; - break; - case e1000_i210: - nvm->ops.validate = igb_validate_nvm_checksum_i210; - nvm->ops.update = igb_update_nvm_checksum_i210; - nvm->ops.acquire = igb_acquire_nvm_i210; - nvm->ops.release = igb_release_nvm_i210; - nvm->ops.read = igb_read_nvm_srrd_i210; - nvm->ops.write = igb_write_nvm_srwr_i210; - nvm->ops.valid_led_default = igb_valid_led_default_i210; - break; - case e1000_i211: - nvm->ops.acquire = igb_acquire_nvm_i210; - nvm->ops.release = igb_release_nvm_i210; - nvm->ops.read = igb_read_nvm_i211; - nvm->ops.valid_led_default = igb_valid_led_default_i210; - nvm->ops.validate = NULL; - nvm->ops.update = NULL; - nvm->ops.write = NULL; - break; - default: - nvm->ops.validate = igb_validate_nvm_checksum; - nvm->ops.update = igb_update_nvm_checksum; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; - break; - } + ret_val = igb_init_nvm_params_82575(hw); + if (ret_val) + goto out; /* if part supports SR-IOV then initialize mailbox parameters */ switch (mac->type) { @@ -638,107 +495,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) } /* setup PHY parameters */ - if (phy->media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; - return 0; - } - - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - - ctrl_ext = rd32(E1000_CTRL_EXT); - - /* PHY function pointers */ - if (igb_sgmii_active_82575(hw)) { - phy->ops.reset = igb_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; - } else { - phy->ops.reset = igb_phy_hw_reset; - ctrl_ext &= ~E1000_CTRL_I2C_ENA; - } - - wr32(E1000_CTRL_EXT, ctrl_ext); - igb_reset_mdicnfg_82580(hw); - - if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; - phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; - } else if ((hw->mac.type == e1000_82580) - || (hw->mac.type == e1000_i350)) { - phy->ops.read_reg = igb_read_phy_reg_82580; - phy->ops.write_reg = igb_write_phy_reg_82580; - } else if (hw->phy.type >= e1000_phy_i210) { - phy->ops.read_reg = igb_read_phy_reg_gs40g; - phy->ops.write_reg = igb_write_phy_reg_gs40g; - } else { - phy->ops.read_reg = igb_read_phy_reg_igp; - phy->ops.write_reg = igb_write_phy_reg_igp; - } - - /* set lan id */ - hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> - E1000_STATUS_FUNC_SHIFT; + ret_val = igb_init_phy_params_82575(hw); - /* Set phy->phy_addr and phy->id. */ - ret_val = igb_get_phy_id_82575(hw); - if (ret_val) - return ret_val; - - /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.get_phy_info = igb_get_phy_info_m88; - - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID) - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - else - phy->ops.get_cable_length = igb_get_cable_length_m88; - - if (phy->id == I210_I_PHY_ID) { - phy->ops.get_cable_length = - igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = - igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = - igb_set_d3_lplu_state_82580; - } - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; - break; - case IGP03E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.get_phy_info = igb_get_phy_info_igp; - phy->ops.get_cable_length = igb_get_cable_length_igp_2; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; - break; - case I82580_I_PHY_ID: - case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580; - phy->ops.get_cable_length = igb_get_cable_length_82580; - phy->ops.get_phy_info = igb_get_phy_info_82580; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; - break; - case I210_I_PHY_ID: - phy->type = e1000_phy_i210; - phy->ops.get_phy_info = igb_get_phy_info_m88; - phy->ops.check_polarity = igb_check_polarity_m88; - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; - break; - default: - return -E1000_ERR_PHY; - } - - return 0; +out: + return ret_val; } /** -- cgit v0.10.2 From 8fc3bb6daab26e0c40c19040208091f140b6f8d5 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Tue, 8 Jan 2013 04:23:53 +0000 Subject: ixgbe: refactor initialization of feature flags This patch reshuffles the switch/case structure of the flag assignment to allow for the flags to be set for each MAC type separately. This is needed for new HW that does not have feature parity with older HW. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Tested-by: Jack Morgan Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1c0efcb..1d5e093 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4480,38 +4480,56 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) hw->subsystem_vendor_id = pdev->subsystem_vendor; hw->subsystem_device_id = pdev->subsystem_device; - /* Set capability flags */ + /* Set common capability flags and settings */ rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus()); adapter->ring_feature[RING_F_RSS].limit = rss; + adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + adapter->ring_feature[RING_F_FDIR].limit = IXGBE_MAX_FDIR_INDICES; + adapter->max_q_vectors = MAX_Q_VECTORS_82599; + adapter->atr_sample_rate = 20; + adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; +#ifdef CONFIG_IXGBE_DCA + adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; +#endif +#ifdef IXGBE_FCOE + adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; +#ifdef CONFIG_IXGBE_DCB + /* Default traffic class to use for FCoE */ + adapter->fcoe.up = IXGBE_FCOE_DEFTC; +#endif /* CONFIG_IXGBE_DCB */ +#endif /* IXGBE_FCOE */ + + /* Set MAC specific capability flags and exceptions */ switch (hw->mac.type) { case ixgbe_mac_82598EB: + adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; + if (hw->device_id == IXGBE_DEV_ID_82598AT) adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; + adapter->max_q_vectors = MAX_Q_VECTORS_82598; + adapter->ring_feature[RING_F_FDIR].limit = 0; + adapter->atr_sample_rate = 0; + adapter->fdir_pballoc = 0; +#ifdef IXGBE_FCOE + adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; +#ifdef CONFIG_IXGBE_DCB + adapter->fcoe.up = 0; +#endif /* IXGBE_DCB */ +#endif /* IXGBE_FCOE */ + break; + case ixgbe_mac_82599EB: + if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; break; case ixgbe_mac_X540: fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); if (fwsm & IXGBE_FWSM_TS_ENABLED) adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; - case ixgbe_mac_82599EB: - adapter->max_q_vectors = MAX_Q_VECTORS_82599; - adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) - adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; - /* Flow Director hash filters enabled */ - adapter->atr_sample_rate = 20; - adapter->ring_feature[RING_F_FDIR].limit = - IXGBE_MAX_FDIR_INDICES; - adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; -#ifdef IXGBE_FCOE - adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; - adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; -#ifdef CONFIG_IXGBE_DCB - /* Default traffic class to use for FCoE */ - adapter->fcoe.up = IXGBE_FCOE_DEFTC; -#endif -#endif /* IXGBE_FCOE */ break; default: break; -- cgit v0.10.2 From bf7cd94dcc71682cd6af4a9028f95307b7db41c5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 14:40:31 +0100 Subject: mac80211: clean up mesh code There's various code with strange indentation, questionable loop and locking constructs, etc. The bigger change is moving the "sdata" argument to the first argument of all functions, like all other mac80211 functions that have one. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 179dcbd..09d96a8 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1500,13 +1500,13 @@ static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, return -ENOENT; } - err = mesh_path_add(dst, sdata); + err = mesh_path_add(sdata, dst); if (err) { rcu_read_unlock(); return err; } - mpath = mesh_path_lookup(dst, sdata); + mpath = mesh_path_lookup(sdata, dst); if (!mpath) { rcu_read_unlock(); return -ENXIO; @@ -1518,12 +1518,12 @@ static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, } static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev, - u8 *dst) + u8 *dst) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (dst) - return mesh_path_del(dst, sdata); + return mesh_path_del(sdata, dst); mesh_path_flush_by_iface(sdata); return 0; @@ -1547,7 +1547,7 @@ static int ieee80211_change_mpath(struct wiphy *wiphy, return -ENOENT; } - mpath = mesh_path_lookup(dst, sdata); + mpath = mesh_path_lookup(sdata, dst); if (!mpath) { rcu_read_unlock(); return -ENOENT; @@ -1611,7 +1611,7 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); - mpath = mesh_path_lookup(dst, sdata); + mpath = mesh_path_lookup(sdata, dst); if (!mpath) { rcu_read_unlock(); return -ENOENT; @@ -1632,7 +1632,7 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); - mpath = mesh_path_lookup_by_idx(idx, sdata); + mpath = mesh_path_lookup_by_idx(sdata, idx); if (!mpath) { rcu_read_unlock(); return -ENOENT; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index f974768..d0dd111 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1173,8 +1173,7 @@ static void __exit ieee80211_exit(void) rc80211_minstrel_ht_exit(); rc80211_minstrel_exit(); - if (mesh_allocated) - ieee80211s_stop(); + ieee80211s_stop(); ieee80211_iface_exit(); diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index a77d40e..b022332 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -17,7 +17,7 @@ #define TMR_RUNNING_MP 1 #define TMR_RUNNING_MPR 2 -int mesh_allocated; +static int mesh_allocated; static struct kmem_cache *rm_cache; bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) @@ -36,6 +36,8 @@ void ieee80211s_init(void) void ieee80211s_stop(void) { + if (!mesh_allocated) + return; mesh_pathtbl_unregister(); kmem_cache_destroy(rm_cache); } @@ -90,24 +92,22 @@ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) - goto mismatch; + return false; ieee80211_sta_get_rates(local, ie, ieee80211_get_sdata_band(sdata), &basic_rates); if (sdata->vif.bss_conf.basic_rates != basic_rates) - goto mismatch; + return false; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, ie->ht_operation, &sta_chan_def); if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef, &sta_chan_def)) - goto mismatch; + return false; return true; -mismatch: - return false; } /** @@ -118,7 +118,7 @@ mismatch: bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) { return (ie->mesh_config->meshconf_cap & - IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; } /** @@ -196,11 +196,12 @@ void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) if (!sdata->u.mesh.rmc) return; - for (i = 0; i < RMC_BUCKETS; i++) + for (i = 0; i < RMC_BUCKETS; i++) { list_for_each_entry_safe(p, n, &rmc->bucket[i], list) { list_del(&p->list); kmem_cache_free(rm_cache, p); } + } kfree(rmc); sdata->u.mesh.rmc = NULL; @@ -209,6 +210,7 @@ void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) /** * mesh_rmc_check - Check frame in recent multicast cache and add if absent. * + * @sdata: interface * @sa: source address * @mesh_hdr: mesh_header * @@ -218,8 +220,8 @@ void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) * received this frame lately. If the frame is not in the cache, it is added to * it. */ -int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, - struct ieee80211_sub_if_data *sdata) +int mesh_rmc_check(struct ieee80211_sub_if_data *sdata, + const u8 *sa, struct ieee80211s_hdr *mesh_hdr) { struct mesh_rmc *rmc = sdata->u.mesh.rmc; u32 seqnum = 0; @@ -233,12 +235,11 @@ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, list_for_each_entry_safe(p, n, &rmc->bucket[idx], list) { ++entries; if (time_after(jiffies, p->exp_time) || - (entries == RMC_QUEUE_MAX_LEN)) { + entries == RMC_QUEUE_MAX_LEN) { list_del(&p->list); kmem_cache_free(rm_cache, p); --entries; - } else if ((seqnum == p->seqnum) && - (ether_addr_equal(sa, p->sa))) + } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa)) return -1; } @@ -253,8 +254,8 @@ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, return 0; } -int -mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) +int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos, neighbors; @@ -285,19 +286,18 @@ mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) /* Mesh capability */ *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING; *pos |= ifmsh->accepting_plinks ? - IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ *pos |= ifmsh->ps_peers_deep_sleep ? - IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; + IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; *pos++ |= ifmsh->adjusting_tbtt ? - IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; *pos++ = 0x00; return 0; } -int -mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) +int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos; @@ -314,8 +314,8 @@ mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) return 0; } -int mesh_add_awake_window_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos; @@ -337,8 +337,8 @@ int mesh_add_awake_window_ie(struct sk_buff *skb, return 0; } -int -mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) +int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 offset, len; @@ -361,8 +361,7 @@ mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) return 0; } -int -mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) +int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 len = 0; @@ -390,8 +389,8 @@ mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) return 0; } -int mesh_add_ds_params_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; @@ -417,8 +416,8 @@ int mesh_add_ds_params_ie(struct sk_buff *skb, return 0; } -int mesh_add_ht_cap_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_local *local = sdata->local; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); @@ -439,8 +438,8 @@ int mesh_add_ht_cap_ie(struct sk_buff *skb, return 0; } -int mesh_add_ht_oper_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *chanctx_conf; @@ -475,6 +474,7 @@ int mesh_add_ht_oper_ie(struct sk_buff *skb, return 0; } + static void ieee80211_mesh_path_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = @@ -520,7 +520,7 @@ void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) /** * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame - * @hdr: 802.11 frame header + * @hdr: 802.11 frame header * @fc: frame control field * @meshda: destination address in the mesh * @meshsa: source address address in the mesh. Same as TA, as frame is @@ -551,8 +551,8 @@ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, /** * ieee80211_new_mesh_header - create a new mesh header - * @meshhdr: uninitialized mesh header * @sdata: mesh interface to be used + * @meshhdr: uninitialized mesh header * @addr4or5: 1st address in the ae header, which may correspond to address 4 * (if addr6 is NULL) or address 5 (if addr6 is present). It may * be NULL. @@ -561,32 +561,38 @@ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, * * Return the header length. */ -int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, - struct ieee80211_sub_if_data *sdata, char *addr4or5, - char *addr6) +int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata, + struct ieee80211s_hdr *meshhdr, + const char *addr4or5, const char *addr6) { - int aelen = 0; - BUG_ON(!addr4or5 && addr6); + if (WARN_ON(!addr4or5 && addr6)) + return 0; + memset(meshhdr, 0, sizeof(*meshhdr)); + meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; + + /* FIXME: racy -- TX on multiple queues can be concurrent */ put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); sdata->u.mesh.mesh_seqnum++; + if (addr4or5 && !addr6) { meshhdr->flags |= MESH_FLAGS_AE_A4; - aelen += ETH_ALEN; memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); + return 2 * ETH_ALEN; } else if (addr4or5 && addr6) { meshhdr->flags |= MESH_FLAGS_AE_A5_A6; - aelen += 2 * ETH_ALEN; memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); + return 3 * ETH_ALEN; } - return 6 + aelen; + + return ETH_ALEN; } -static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, - struct ieee80211_if_mesh *ifmsh) +static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata) { + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u32 changed; ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT); @@ -596,7 +602,8 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, ieee80211_mbss_info_change_notify(sdata, changed); mod_timer(&ifmsh->housekeeping_timer, - round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); + round_jiffies(jiffies + + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); } static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) @@ -708,7 +715,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) *pos++ = 0x0; if (ieee80211_add_srates_ie(sdata, skb, true, band) || - mesh_add_ds_params_ie(skb, sdata)) + mesh_add_ds_params_ie(sdata, skb)) goto out_free; bcn->head_len = skb->len; @@ -719,13 +726,13 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) bcn->tail = bcn->head + bcn->head_len; if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) || - mesh_add_rsn_ie(skb, sdata) || - mesh_add_ht_cap_ie(skb, sdata) || - mesh_add_ht_oper_ie(skb, sdata) || - mesh_add_meshid_ie(skb, sdata) || - mesh_add_meshconf_ie(skb, sdata) || - mesh_add_awake_window_ie(skb, sdata) || - mesh_add_vendor_ies(skb, sdata)) + mesh_add_rsn_ie(sdata, skb) || + mesh_add_ht_cap_ie(sdata, skb) || + mesh_add_ht_oper_ie(sdata, skb) || + mesh_add_meshid_ie(sdata, skb) || + mesh_add_meshconf_ie(sdata, skb) || + mesh_add_awake_window_ie(sdata, skb) || + mesh_add_vendor_ies(sdata, skb)) goto out_free; bcn->tail_len = skb->len; @@ -1039,7 +1046,7 @@ void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) mesh_mpp_table_grow(); if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) - ieee80211_mesh_housekeeping(sdata, ifmsh); + ieee80211_mesh_housekeeping(sdata); if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) ieee80211_mesh_rootpath(sdata); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 1a1da87..336c88a 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -26,12 +26,12 @@ * @MESH_PATH_ACTIVE: the mesh path can be used for forwarding * @MESH_PATH_RESOLVING: the discovery process is running for this mesh path * @MESH_PATH_SN_VALID: the mesh path contains a valid destination sequence - * number + * number * @MESH_PATH_FIXED: the mesh path has been manually set and should not be - * modified + * modified * @MESH_PATH_RESOLVED: the mesh path can has been resolved * @MESH_PATH_REQ_QUEUED: there is an unsent path request for this destination - * already queued up, waiting for the discovery process to start. + * already queued up, waiting for the discovery process to start. * * MESH_PATH_RESOLVED is used by the mesh path timer to * decide when to stop or cancel the mesh path discovery. @@ -73,16 +73,16 @@ enum mesh_deferred_task_flags { * @dst: mesh path destination mac address * @sdata: mesh subif * @next_hop: mesh neighbor to which frames for this destination will be - * forwarded + * forwarded * @timer: mesh path discovery timer * @frame_queue: pending queue for frames sent to this destination while the - * path is unresolved + * path is unresolved * @sn: target sequence number * @metric: current metric to this destination * @hop_count: hops to destination * @exp_time: in jiffies, when the path will expire or when it expired * @discovery_timeout: timeout (lapse in jiffies) used for the last discovery - * retry + * retry * @discovery_retries: number of discovery retries * @flags: mesh path flags, as specified on &enum mesh_path_flags * @state_lock: mesh path state lock used to protect changes to the @@ -206,38 +206,33 @@ struct mesh_rmc { /* Various */ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, const u8 *da, const u8 *sa); -int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, - struct ieee80211_sub_if_data *sdata, char *addr4or5, - char *addr6); -int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr, - struct ieee80211_sub_if_data *sdata); +int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata, + struct ieee80211s_hdr *meshhdr, + const char *addr4or5, const char *addr6); +int mesh_rmc_check(struct ieee80211_sub_if_data *sdata, + const u8 *addr, struct ieee80211s_hdr *mesh_hdr); bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *ie); void mesh_ids_set_default(struct ieee80211_if_mesh *mesh); -void mesh_mgmt_ies_add(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_meshconf_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_meshid_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_rsn_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_awake_window_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_vendor_ies(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_ds_params_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_ht_cap_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_add_ht_oper_ie(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); +void mesh_mgmt_ies_add(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); void mesh_rmc_free(struct ieee80211_sub_if_data *sdata); int mesh_rmc_init(struct ieee80211_sub_if_data *sdata); void ieee80211s_init(void); void ieee80211s_update_metric(struct ieee80211_local *local, - struct sta_info *sta, struct sk_buff *skb); -void ieee80211s_stop(void); + struct sta_info *sta, struct sk_buff *skb); void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata); int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); @@ -263,31 +258,32 @@ void ieee80211_mps_frame_release(struct sta_info *sta, struct ieee802_11_elems *elems); /* Mesh paths */ -int mesh_nexthop_lookup(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); -int mesh_nexthop_resolve(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); +int mesh_nexthop_lookup(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata); -struct mesh_path *mesh_path_lookup(const u8 *dst, - struct ieee80211_sub_if_data *sdata); -struct mesh_path *mpp_path_lookup(u8 *dst, - struct ieee80211_sub_if_data *sdata); -int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata); -struct mesh_path *mesh_path_lookup_by_idx(int idx, - struct ieee80211_sub_if_data *sdata); +struct mesh_path *mesh_path_lookup(struct ieee80211_sub_if_data *sdata, + const u8 *dst); +struct mesh_path *mpp_path_lookup(struct ieee80211_sub_if_data *sdata, + const u8 *dst); +int mpp_path_add(struct ieee80211_sub_if_data *sdata, + const u8 *dst, const u8 *mpp); +struct mesh_path * +mesh_path_lookup_by_idx(struct ieee80211_sub_if_data *sdata, int idx); void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop); void mesh_path_expire(struct ieee80211_sub_if_data *sdata); void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, size_t len); -int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata); + struct ieee80211_mgmt *mgmt, size_t len); +int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst); int mesh_path_add_gate(struct mesh_path *mpath); int mesh_path_send_to_gates(struct mesh_path *mpath); int mesh_gate_num(struct ieee80211_sub_if_data *sdata); + /* Mesh plinks */ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, - u8 *hw_addr, - struct ieee802_11_elems *ie); + u8 *hw_addr, struct ieee802_11_elems *ie); bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); @@ -304,19 +300,19 @@ void mesh_sta_cleanup(struct sta_info *sta); void mesh_mpath_table_grow(void); void mesh_mpp_table_grow(void); /* Mesh paths */ -int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, - __le16 target_rcode, const u8 *ra, - struct ieee80211_sub_if_data *sdata); +int mesh_path_error_tx(struct ieee80211_sub_if_data *sdata, + u8 ttl, const u8 *target, __le32 target_sn, + __le16 target_rcode, const u8 *ra); void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta); void mesh_path_flush_pending(struct mesh_path *mpath); void mesh_path_tx_pending(struct mesh_path *mpath); int mesh_pathtbl_init(void); void mesh_pathtbl_unregister(void); -int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata); +int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr); void mesh_path_timer(unsigned long data); void mesh_path_flush_by_nexthop(struct sta_info *sta); -void mesh_path_discard_frame(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata); +void mesh_path_discard_frame(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata); void mesh_path_restart(struct ieee80211_sub_if_data *sdata); void mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata); @@ -325,8 +321,6 @@ bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt); extern int mesh_paths_generation; #ifdef CONFIG_MAC80211_MESH -extern int mesh_allocated; - static inline u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) { @@ -371,8 +365,8 @@ void mesh_plink_quiesce(struct sta_info *sta); void mesh_plink_restart(struct sta_info *sta); void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata); void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata); +void ieee80211s_stop(void); #else -#define mesh_allocated 0 static inline void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {} static inline void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) @@ -385,6 +379,7 @@ static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata) { return false; } static inline void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata) {} +static inline void ieee80211s_stop(void) {} #endif #endif /* IEEE80211S_H */ diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 585c1e2..bdb8d3b 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -238,9 +238,9 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, * also acquires in the TX path. To avoid a deadlock we don't transmit the * frame directly but add it to the pending queue instead. */ -int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, - __le16 target_rcode, const u8 *ra, - struct ieee80211_sub_if_data *sdata) +int mesh_path_error_tx(struct ieee80211_sub_if_data *sdata, + u8 ttl, const u8 *target, __le32 target_sn, + __le16 target_rcode, const u8 *ra) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -430,7 +430,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, process = false; fresh_info = false; } else { - mpath = mesh_path_lookup(orig_addr, sdata); + mpath = mesh_path_lookup(sdata, orig_addr); if (mpath) { spin_lock_bh(&mpath->state_lock); if (mpath->flags & MESH_PATH_FIXED) @@ -445,8 +445,8 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, } } } else { - mesh_path_add(orig_addr, sdata); - mpath = mesh_path_lookup(orig_addr, sdata); + mesh_path_add(sdata, orig_addr); + mpath = mesh_path_lookup(sdata, orig_addr); if (!mpath) { rcu_read_unlock(); return 0; @@ -478,7 +478,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, else { fresh_info = true; - mpath = mesh_path_lookup(ta, sdata); + mpath = mesh_path_lookup(sdata, ta); if (mpath) { spin_lock_bh(&mpath->state_lock); if ((mpath->flags & MESH_PATH_FIXED) || @@ -486,8 +486,8 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, (last_hop_metric > mpath->metric))) fresh_info = false; } else { - mesh_path_add(ta, sdata); - mpath = mesh_path_lookup(ta, sdata); + mesh_path_add(sdata, ta); + mpath = mesh_path_lookup(sdata, ta); if (!mpath) { rcu_read_unlock(); return 0; @@ -553,7 +553,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, } else if (is_broadcast_ether_addr(target_addr) && (target_flags & IEEE80211_PREQ_TO_FLAG)) { rcu_read_lock(); - mpath = mesh_path_lookup(orig_addr, sdata); + mpath = mesh_path_lookup(sdata, orig_addr); if (mpath) { if (flags & IEEE80211_PREQ_PROACTIVE_PREP_FLAG) { reply = true; @@ -568,7 +568,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); } else { rcu_read_lock(); - mpath = mesh_path_lookup(target_addr, sdata); + mpath = mesh_path_lookup(sdata, target_addr); if (mpath) { if ((!(mpath->flags & MESH_PATH_SN_VALID)) || SN_LT(mpath->sn, target_sn)) { @@ -678,7 +678,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, } rcu_read_lock(); - mpath = mesh_path_lookup(orig_addr, sdata); + mpath = mesh_path_lookup(sdata, orig_addr); if (mpath) spin_lock_bh(&mpath->state_lock); else @@ -736,7 +736,7 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, target_rcode = PERR_IE_TARGET_RCODE(perr_elem); rcu_read_lock(); - mpath = mesh_path_lookup(target_addr, sdata); + mpath = mesh_path_lookup(sdata, target_addr); if (mpath) { struct sta_info *sta; @@ -751,9 +751,10 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, spin_unlock_bh(&mpath->state_lock); if (!ifmsh->mshcfg.dot11MeshForwarding) goto endperr; - mesh_path_error_tx(ttl, target_addr, cpu_to_le32(target_sn), + mesh_path_error_tx(sdata, ttl, target_addr, + cpu_to_le32(target_sn), cpu_to_le16(target_rcode), - broadcast_addr, sdata); + broadcast_addr); } else spin_unlock_bh(&mpath->state_lock); } @@ -801,10 +802,10 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, metric_txsta = airtime_link_metric_get(local, sta); - mpath = mesh_path_lookup(orig_addr, sdata); + mpath = mesh_path_lookup(sdata, orig_addr); if (!mpath) { - mesh_path_add(orig_addr, sdata); - mpath = mesh_path_lookup(orig_addr, sdata); + mesh_path_add(sdata, orig_addr); + mpath = mesh_path_lookup(sdata, orig_addr); if (!mpath) { rcu_read_unlock(); sdata->u.mesh.mshstats.dropped_frames_no_route++; @@ -861,8 +862,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len) + struct ieee80211_mgmt *mgmt, size_t len) { struct ieee802_11_elems elems; size_t baselen; @@ -1006,7 +1006,7 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata) spin_unlock_bh(&ifmsh->mesh_preq_queue_lock); rcu_read_lock(); - mpath = mesh_path_lookup(preq_node->dst, sdata); + mpath = mesh_path_lookup(sdata, preq_node->dst); if (!mpath) goto enddiscovery; @@ -1076,8 +1076,8 @@ enddiscovery: * Returns: 0 if the next hop was found and -ENOENT if the frame was queued. * skb is freeed here if no mpath could be allocated. */ -int mesh_nexthop_resolve(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -1091,17 +1091,17 @@ int mesh_nexthop_resolve(struct sk_buff *skb, return 0; rcu_read_lock(); - err = mesh_nexthop_lookup(skb, sdata); + err = mesh_nexthop_lookup(sdata, skb); if (!err) goto endlookup; /* no nexthop found, start resolving */ - mpath = mesh_path_lookup(target_addr, sdata); + mpath = mesh_path_lookup(sdata, target_addr); if (!mpath) { - mesh_path_add(target_addr, sdata); - mpath = mesh_path_lookup(target_addr, sdata); + mesh_path_add(sdata, target_addr); + mpath = mesh_path_lookup(sdata, target_addr); if (!mpath) { - mesh_path_discard_frame(skb, sdata); + mesh_path_discard_frame(sdata, skb); err = -ENOSPC; goto endlookup; } @@ -1118,12 +1118,13 @@ int mesh_nexthop_resolve(struct sk_buff *skb, skb_queue_tail(&mpath->frame_queue, skb); err = -ENOENT; if (skb_to_free) - mesh_path_discard_frame(skb_to_free, sdata); + mesh_path_discard_frame(sdata, skb_to_free); endlookup: rcu_read_unlock(); return err; } + /** * mesh_nexthop_lookup - put the appropriate next hop on a mesh frame. Calling * this function is considered "using" the associated mpath, so preempt a path @@ -1134,8 +1135,8 @@ endlookup: * * Returns: 0 if the next hop was found. Nonzero otherwise. */ -int mesh_nexthop_lookup(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +int mesh_nexthop_lookup(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { struct mesh_path *mpath; struct sta_info *next_hop; @@ -1144,7 +1145,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb, int err = -ENOENT; rcu_read_lock(); - mpath = mesh_path_lookup(target_addr, sdata); + mpath = mesh_path_lookup(sdata, target_addr); if (!mpath || !(mpath->flags & MESH_PATH_ACTIVE)) goto endlookup; @@ -1203,8 +1204,7 @@ void mesh_path_timer(unsigned long data) } } -void -mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata) +void mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u32 interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 2ce4c40..6b3c4e1 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -24,9 +24,12 @@ /* Keep the mean chain length below this constant */ #define MEAN_CHAIN_LEN 2 -#define MPATH_EXPIRED(mpath) ((mpath->flags & MESH_PATH_ACTIVE) && \ - time_after(jiffies, mpath->exp_time) && \ - !(mpath->flags & MESH_PATH_FIXED)) +static inline bool mpath_expired(struct mesh_path *mpath) +{ + return (mpath->flags & MESH_PATH_ACTIVE) && + time_after(jiffies, mpath->exp_time) && + !(mpath->flags & MESH_PATH_FIXED); +} struct mpath_node { struct hlist_node list; @@ -185,8 +188,8 @@ static u32 mesh_table_hash(const u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) { /* Use last four bytes of hw addr and interface index as hash index */ - return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd) - & tbl->hash_mask; + return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, + tbl->hash_rnd) & tbl->hash_mask; } @@ -339,7 +342,7 @@ static struct mesh_path *mpath_lookup(struct mesh_table *tbl, const u8 *dst, mpath = node->mpath; if (mpath->sdata == sdata && ether_addr_equal(dst, mpath->dst)) { - if (MPATH_EXPIRED(mpath)) { + if (mpath_expired(mpath)) { spin_lock_bh(&mpath->state_lock); mpath->flags &= ~MESH_PATH_ACTIVE; spin_unlock_bh(&mpath->state_lock); @@ -352,20 +355,21 @@ static struct mesh_path *mpath_lookup(struct mesh_table *tbl, const u8 *dst, /** * mesh_path_lookup - look up a path in the mesh path table - * @dst: hardware address (ETH_ALEN length) of destination * @sdata: local subif + * @dst: hardware address (ETH_ALEN length) of destination * * Returns: pointer to the mesh path structure, or NULL if not found * * Locking: must be called within a read rcu section. */ -struct mesh_path *mesh_path_lookup(const u8 *dst, - struct ieee80211_sub_if_data *sdata) +struct mesh_path * +mesh_path_lookup(struct ieee80211_sub_if_data *sdata, const u8 *dst) { return mpath_lookup(rcu_dereference(mesh_paths), dst, sdata); } -struct mesh_path *mpp_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata) +struct mesh_path * +mpp_path_lookup(struct ieee80211_sub_if_data *sdata, const u8 *dst) { return mpath_lookup(rcu_dereference(mpp_paths), dst, sdata); } @@ -380,7 +384,8 @@ struct mesh_path *mpp_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata) * * Locking: must be called within a read rcu section. */ -struct mesh_path *mesh_path_lookup_by_idx(int idx, struct ieee80211_sub_if_data *sdata) +struct mesh_path * +mesh_path_lookup_by_idx(struct ieee80211_sub_if_data *sdata, int idx) { struct mesh_table *tbl = rcu_dereference(mesh_paths); struct mpath_node *node; @@ -392,7 +397,7 @@ struct mesh_path *mesh_path_lookup_by_idx(int idx, struct ieee80211_sub_if_data if (sdata && node->mpath->sdata != sdata) continue; if (j++ == idx) { - if (MPATH_EXPIRED(node->mpath)) { + if (mpath_expired(node->mpath)) { spin_lock_bh(&node->mpath->state_lock); node->mpath->flags &= ~MESH_PATH_ACTIVE; spin_unlock_bh(&node->mpath->state_lock); @@ -436,11 +441,10 @@ int mesh_path_add_gate(struct mesh_path *mpath) spin_lock_bh(&tbl->gates_lock); hlist_add_head_rcu(&new_gate->list, tbl->known_gates); spin_unlock_bh(&tbl->gates_lock); - rcu_read_unlock(); mpath_dbg(mpath->sdata, "Mesh path: Recorded new gate: %pM. %d known gates\n", mpath->dst, mpath->sdata->u.mesh.num_gates); - return 0; + err = 0; err_rcu: rcu_read_unlock(); return err; @@ -451,30 +455,27 @@ err_rcu: * @tbl: table which holds our list of known gates * @mpath: gate mpath * - * Returns: 0 on success - * * Locking: must be called inside rcu_read_lock() section */ -static int mesh_gate_del(struct mesh_table *tbl, struct mesh_path *mpath) +static void mesh_gate_del(struct mesh_table *tbl, struct mesh_path *mpath) { struct mpath_node *gate; struct hlist_node *p, *q; - hlist_for_each_entry_safe(gate, p, q, tbl->known_gates, list) - if (gate->mpath == mpath) { - spin_lock_bh(&tbl->gates_lock); - hlist_del_rcu(&gate->list); - kfree_rcu(gate, rcu); - spin_unlock_bh(&tbl->gates_lock); - mpath->sdata->u.mesh.num_gates--; - mpath->is_gate = false; - mpath_dbg(mpath->sdata, - "Mesh path: Deleted gate: %pM. %d known gates\n", - mpath->dst, mpath->sdata->u.mesh.num_gates); - break; - } - - return 0; + hlist_for_each_entry_safe(gate, p, q, tbl->known_gates, list) { + if (gate->mpath != mpath) + continue; + spin_lock_bh(&tbl->gates_lock); + hlist_del_rcu(&gate->list); + kfree_rcu(gate, rcu); + spin_unlock_bh(&tbl->gates_lock); + mpath->sdata->u.mesh.num_gates--; + mpath->is_gate = false; + mpath_dbg(mpath->sdata, + "Mesh path: Deleted gate: %pM. %d known gates\n", + mpath->dst, mpath->sdata->u.mesh.num_gates); + break; + } } /** @@ -488,14 +489,14 @@ int mesh_gate_num(struct ieee80211_sub_if_data *sdata) /** * mesh_path_add - allocate and add a new path to the mesh path table - * @addr: destination address of the path (ETH_ALEN length) + * @dst: destination address of the path (ETH_ALEN length) * @sdata: local subif * * Returns: 0 on success * * State: the initial state of the new path is set to 0 */ -int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata) +int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; @@ -630,7 +631,8 @@ void mesh_mpp_table_grow(void) write_unlock_bh(&pathtbl_resize_lock); } -int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata) +int mpp_path_add(struct ieee80211_sub_if_data *sdata, + const u8 *dst, const u8 *mpp) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; @@ -739,9 +741,10 @@ void mesh_plink_broken(struct sta_info *sta) mpath->flags &= ~MESH_PATH_ACTIVE; ++mpath->sn; spin_unlock_bh(&mpath->state_lock); - mesh_path_error_tx(sdata->u.mesh.mshcfg.element_ttl, - mpath->dst, cpu_to_le32(mpath->sn), - reason, bcast, sdata); + mesh_path_error_tx(sdata, + sdata->u.mesh.mshcfg.element_ttl, + mpath->dst, cpu_to_le32(mpath->sn), + reason, bcast); } } rcu_read_unlock(); @@ -856,7 +859,7 @@ void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata) * * Returns: 0 if successful */ -int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata) +int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) { struct mesh_table *tbl; struct mesh_path *mpath; @@ -965,8 +968,8 @@ int mesh_path_send_to_gates(struct mesh_path *mpath) * * Locking: the function must me called within a rcu_read_lock region */ -void mesh_path_discard_frame(struct sk_buff *skb, - struct ieee80211_sub_if_data *sdata) +void mesh_path_discard_frame(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { kfree_skb(skb); sdata->u.mesh.mshstats.dropped_frames_no_route++; @@ -984,7 +987,7 @@ void mesh_path_flush_pending(struct mesh_path *mpath) struct sk_buff *skb; while ((skb = skb_dequeue(&mpath->frame_queue)) != NULL) - mesh_path_discard_frame(skb, mpath->sdata); + mesh_path_discard_frame(mpath->sdata, skb); } /** @@ -1105,7 +1108,7 @@ void mesh_path_expire(struct ieee80211_sub_if_data *sdata) if ((!(mpath->flags & MESH_PATH_RESOLVING)) && (!(mpath->flags & MESH_PATH_FIXED)) && time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE)) - mesh_path_del(mpath->dst, mpath->sdata); + mesh_path_del(mpath->sdata, mpath->dst); } rcu_read_unlock(); } diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index f7526e5..0b58e81 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -38,8 +38,8 @@ enum plink_event { }; static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, - enum ieee80211_self_protected_actioncode action, - u8 *da, __le16 llid, __le16 plid, __le16 reason); + enum ieee80211_self_protected_actioncode action, + u8 *da, __le16 llid, __le16 plid, __le16 reason); /** * mesh_plink_fsm_restart - restart a mesh peer link finite state machine @@ -231,8 +231,9 @@ u32 mesh_plink_deactivate(struct sta_info *sta) } static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, - enum ieee80211_self_protected_actioncode action, - u8 *da, __le16 llid, __le16 plid, __le16 reason) { + enum ieee80211_self_protected_actioncode action, + u8 *da, __le16 llid, __le16 plid, __le16 reason) +{ struct ieee80211_local *local = sdata->local; struct sk_buff *skb; struct ieee80211_tx_info *info; @@ -283,13 +284,13 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, } if (ieee80211_add_srates_ie(sdata, skb, true, band) || ieee80211_add_ext_srates_ie(sdata, skb, true, band) || - mesh_add_rsn_ie(skb, sdata) || - mesh_add_meshid_ie(skb, sdata) || - mesh_add_meshconf_ie(skb, sdata)) + mesh_add_rsn_ie(sdata, skb) || + mesh_add_meshid_ie(sdata, skb) || + mesh_add_meshconf_ie(sdata, skb)) goto free; } else { /* WLAN_SP_MESH_PEERING_CLOSE */ info->flags |= IEEE80211_TX_CTL_NO_ACK; - if (mesh_add_meshid_ie(skb, sdata)) + if (mesh_add_meshid_ie(sdata, skb)) goto free; } @@ -333,12 +334,12 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, } if (action != WLAN_SP_MESH_PEERING_CLOSE) { - if (mesh_add_ht_cap_ie(skb, sdata) || - mesh_add_ht_oper_ie(skb, sdata)) + if (mesh_add_ht_cap_ie(sdata, skb) || + mesh_add_ht_oper_ie(sdata, skb)) goto free; } - if (mesh_add_vendor_ies(skb, sdata)) + if (mesh_add_vendor_ies(sdata, skb)) goto free; ieee80211_tx_skb(sdata, skb); @@ -666,8 +667,9 @@ u32 mesh_plink_block(struct sta_info *sta) } -void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - size_t len, struct ieee80211_rx_status *rx_status) +void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + struct ieee80211_rx_status *rx_status) { struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg; struct ieee802_11_elems elems; @@ -680,7 +682,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m u8 *baseaddr; u32 changed = 0; __le16 plid, llid, reason; - static const char *mplstates[] = { + static const char * const mplstates[] = { [NL80211_PLINK_LISTEN] = "LISTEN", [NL80211_PLINK_OPN_SNT] = "OPN-SNT", [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD", @@ -708,13 +710,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m baselen += 4; } ieee802_11_parse_elems(baseaddr, len - baselen, &elems); + if (!elems.peering) { mpl_dbg(sdata, "Mesh plink: missing necessary peer link ie\n"); return; } + if (elems.rsn_len && - sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) { + sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) { mpl_dbg(sdata, "Mesh plink: can't establish link with secure peer\n"); return; @@ -733,7 +737,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } if (ftype != WLAN_SP_MESH_PEERING_CLOSE && - (!elems.mesh_id || !elems.mesh_config)) { + (!elems.mesh_id || !elems.mesh_config)) { mpl_dbg(sdata, "Mesh plink: missing necessary ie\n"); return; } diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c index aa8d1e4..05a256b 100644 --- a/net/mac80211/mesh_sync.c +++ b/net/mac80211/mesh_sync.c @@ -43,7 +43,7 @@ struct sync_method { static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie) { return (ie->mesh_config->meshconf_cap & - IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0; + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0; } void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata) @@ -112,7 +112,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) { clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN); - msync_dbg(sdata, "STA %pM : is adjusting TBTT\n", sta->sta.addr); + msync_dbg(sdata, "STA %pM : is adjusting TBTT\n", + sta->sta.addr); goto no_sync; } @@ -129,18 +130,15 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, sta->t_offset = t_t - t_r; if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) { - s64 t_clockdrift = sta->t_offset_setpoint - - sta->t_offset; + s64 t_clockdrift = sta->t_offset_setpoint - sta->t_offset; msync_dbg(sdata, "STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld\n", - sta->sta.addr, - (long long) sta->t_offset, - (long long) - sta->t_offset_setpoint, + sta->sta.addr, (long long) sta->t_offset, + (long long) sta->t_offset_setpoint, (long long) t_clockdrift); if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT || - t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) { + t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) { msync_dbg(sdata, "STA %pM : t_clockdrift=%lld too large, setpoint reset\n", sta->sta.addr, @@ -149,15 +147,10 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, goto no_sync; } - rcu_read_unlock(); - spin_lock_bh(&ifmsh->sync_offset_lock); - if (t_clockdrift > - ifmsh->sync_offset_clockdrift_max) - ifmsh->sync_offset_clockdrift_max - = t_clockdrift; + if (t_clockdrift > ifmsh->sync_offset_clockdrift_max) + ifmsh->sync_offset_clockdrift_max = t_clockdrift; spin_unlock_bh(&ifmsh->sync_offset_lock); - } else { sta->t_offset_setpoint = sta->t_offset - TOFFSET_SET_MARGIN; set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN); @@ -165,9 +158,7 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, "STA %pM : offset was invalid, sta->t_offset=%lld\n", sta->sta.addr, (long long) sta->t_offset); - rcu_read_unlock(); } - return; no_sync: rcu_read_unlock(); @@ -177,14 +168,12 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - WARN_ON(ifmsh->mesh_sp_id - != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET); + WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET); BUG_ON(!rcu_read_lock_held()); spin_lock_bh(&ifmsh->sync_offset_lock); - if (ifmsh->sync_offset_clockdrift_max > - TOFFSET_MINIMUM_ADJUSTMENT) { + if (ifmsh->sync_offset_clockdrift_max > TOFFSET_MINIMUM_ADJUSTMENT) { /* Since ajusting the tsf here would * require a possibly blocking call * to the driver tsf setter, we punt @@ -193,8 +182,7 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata) msync_dbg(sdata, "TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n", ifmsh->sync_offset_clockdrift_max); - set_bit(MESH_WORK_DRIFT_ADJUST, - &ifmsh->wrkq_flags); + set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags); ifmsh->adjusting_tbtt = true; } else { @@ -220,14 +208,11 @@ static const struct sync_method sync_methods[] = { const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method) { - const struct ieee80211_mesh_sync_ops *ops = NULL; - u8 i; + int i; for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) { - if (sync_methods[i].method == method) { - ops = &sync_methods[i].ops; - break; - } + if (sync_methods[i].method == method) + return &sync_methods[i].ops; } - return ops; + return NULL; } diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 3acb70b..bb73ed2d 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2027,7 +2027,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) /* frame is in RMC, don't forward */ if (ieee80211_is_data(hdr->frame_control) && is_multicast_ether_addr(hdr->addr1) && - mesh_rmc_check(hdr->addr3, mesh_hdr, rx->sdata)) + mesh_rmc_check(rx->sdata, hdr->addr3, mesh_hdr)) return RX_DROP_MONITOR; if (!ieee80211_is_data(hdr->frame_control) || @@ -2054,9 +2054,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) } rcu_read_lock(); - mppath = mpp_path_lookup(proxied_addr, sdata); + mppath = mpp_path_lookup(sdata, proxied_addr); if (!mppath) { - mpp_path_add(proxied_addr, mpp_addr, sdata); + mpp_path_add(sdata, proxied_addr, mpp_addr); } else { spin_lock_bh(&mppath->state_lock); if (!ether_addr_equal(mppath->mpp, mpp_addr)) @@ -2104,13 +2104,13 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN); /* update power mode indication when forwarding */ ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr); - } else if (!mesh_nexthop_lookup(fwd_skb, sdata)) { + } else if (!mesh_nexthop_lookup(sdata, fwd_skb)) { /* mesh power mode flags updated in mesh_nexthop_lookup */ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast); } else { /* unable to resolve next hop */ - mesh_path_error_tx(ifmsh->mshcfg.element_ttl, fwd_hdr->addr3, - 0, reason, fwd_hdr->addr2, sdata); + mesh_path_error_tx(sdata, ifmsh->mshcfg.element_ttl, + fwd_hdr->addr3, 0, reason, fwd_hdr->addr2); IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_no_route); kfree_skb(fwd_skb); return RX_DROP_MONITOR; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index fe644f9..5b9602b 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1495,7 +1495,7 @@ void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, if (ieee80211_vif_is_mesh(&sdata->vif)) { if (ieee80211_is_data(hdr->frame_control) && is_unicast_ether_addr(hdr->addr1)) { - if (mesh_nexthop_resolve(skb, sdata)) + if (mesh_nexthop_resolve(sdata, skb)) return; /* skb queued: don't free */ } else { ieee80211_mps_set_frame_flags(sdata, NULL, hdr); @@ -1844,9 +1844,9 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, } if (!is_multicast_ether_addr(skb->data)) { - mpath = mesh_path_lookup(skb->data, sdata); + mpath = mesh_path_lookup(sdata, skb->data); if (!mpath) - mppath = mpp_path_lookup(skb->data, sdata); + mppath = mpp_path_lookup(sdata, skb->data); } /* @@ -1859,8 +1859,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, !(mppath && !ether_addr_equal(mppath->mpp, skb->data))) { hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, skb->data, skb->data + ETH_ALEN); - meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, - sdata, NULL, NULL); + meshhdrlen = ieee80211_new_mesh_header(sdata, &mesh_hdr, + NULL, NULL); } else { /* DS -> MBSS (802.11-2012 13.11.3.3). * For unicast with unknown forwarding information, @@ -1879,18 +1879,14 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, mesh_da, sdata->vif.addr); if (is_multicast_ether_addr(mesh_da)) /* DA TA mSA AE:SA */ - meshhdrlen = - ieee80211_new_mesh_header(&mesh_hdr, - sdata, - skb->data + ETH_ALEN, - NULL); + meshhdrlen = ieee80211_new_mesh_header( + sdata, &mesh_hdr, + skb->data + ETH_ALEN, NULL); else /* RA TA mDA mSA AE:DA SA */ - meshhdrlen = - ieee80211_new_mesh_header(&mesh_hdr, - sdata, - skb->data, - skb->data + ETH_ALEN); + meshhdrlen = ieee80211_new_mesh_header( + sdata, &mesh_hdr, skb->data, + skb->data + ETH_ALEN); } chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); -- cgit v0.10.2 From 8ffb5c001a6d1ef142ef550861e0b97e291f6469 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 15 Feb 2013 10:18:34 -0500 Subject: mac80211: enable vif.cab_queue for mesh Since mesh powersaving was added, pending bcast/mcast frames may go out the CAB queue now. Unfortunately, the queue was only set up for AP mode, so we would try to tx on the IEEE80211_INVAL_HW_QUEUE. Allow cab_queue for mesh interfaces as well. Fixes the following warning (or crash without MAC80211_VERBOSE_DEBUG): WARNING: at net/mac80211/tx.c:1223 __ieee80211_tx+0x162/0x35f [mac80211]() Modules linked in: mac80211_hwsim mac80211 cfg80211 [...] Pid: 3085, comm: avahi-daemon Tainted: G W 3.8.0-rc1+ #377 Call Trace: [] warn_slowpath_common+0x83/0x9c [] warn_slowpath_null+0x1a/0x1c [] __ieee80211_tx+0x162/0x35f [mac80211] [] ieee80211_tx+0xd3/0xf9 [mac80211] [] ieee80211_xmit+0xcc/0xd5 [mac80211] [] ieee80211_subif_start_xmit+0xc53/0xcd8 [mac80211] [] dev_hard_start_xmit+0x259/0x3ce [] sch_direct_xmit+0x74/0x17d [] dev_queue_xmit+0x230/0x414 [] ip_finish_output2+0x348/0x3aa [] ip_finish_output+0x6c/0x71 [] NF_HOOK_COND.constprop.44+0x18/0x58 [] ip_mc_output+0x134/0x13c [] dst_output+0x18/0x1c [] ip_local_out+0x20/0x24 [] ip_send_skb+0x16/0x3c [] udp_send_skb+0x254/0x2b9 [] udp_sendmsg+0x5a8/0x7d4 Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 86c8308..a1f7194 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -294,7 +294,8 @@ static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata) } } - if ((sdata->vif.type != NL80211_IFTYPE_AP) || + if ((sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) || !(sdata->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)) { sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; return 0; -- cgit v0.10.2 From d3f677afb8076d09d090ff0a5d1229c9dd9f136e Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Thu, 14 Feb 2013 14:27:51 +0000 Subject: tg3: Add 57766 device support. The patch also adds a couple of fixes - For the 57766 and non Ax versions of 57765, bootcode needs to setup the PCIE Fast Training Sequence (FTS) value to prevent transmit hangs. Unfortunately, it does not have enough room in the selfboot case (i.e. devices with no NVRAM). The driver needs to implement this. - For performance reasons, the 2k DMA engine mode on the 57766 should be enabled and dma size limited to 2k for standard sized packets. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index b1b3bc0..6e676a7 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -332,6 +332,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = { {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57762)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57766)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5762)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5725)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5727)}, @@ -9179,7 +9180,14 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) } if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_57765_AX) { - u32 grc_mode = tr32(GRC_MODE); + u32 grc_mode; + + /* Fix transmit hangs */ + val = tr32(TG3_CPMU_PADRNG_CTL); + val |= TG3_CPMU_PADRNG_CTL_RDIV2; + tw32(TG3_CPMU_PADRNG_CTL, val); + + grc_mode = tr32(GRC_MODE); /* Access the lower 1K of DL PCIE block registers. */ val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK; @@ -9492,6 +9500,14 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (tg3_flag(tp, PCI_EXPRESS)) rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766) { + tp->dma_limit = 0; + if (tp->dev->mtu <= ETH_DATA_LEN) { + rdmac_mode |= RDMAC_MODE_JMB_2K_MMRR; + tp->dma_limit = TG3_TX_BD_DMA_MAX_2K; + } + } + if (tg3_flag(tp, HW_TSO_1) || tg3_flag(tp, HW_TSO_2) || tg3_flag(tp, HW_TSO_3)) diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index ef6ced2..b676728 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -1164,6 +1164,8 @@ #define CPMU_MUTEX_GNT_DRIVER 0x00001000 #define TG3_CPMU_PHY_STRAP 0x00003664 #define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020 +#define TG3_CPMU_PADRNG_CTL 0x00003668 +#define TG3_CPMU_PADRNG_CTL_RDIV2 0x00040000 /* 0x3664 --> 0x36b0 unused */ #define TG3_CPMU_EEE_MODE 0x000036b0 -- cgit v0.10.2 From d240d210f5a9254d4df395d65f1ed3b2b45bc298 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 14 Feb 2013 13:24:27 +0000 Subject: tg3: Expand EEE support for all 5717 B0 This chip supports Energy Efficient Ethernet. The existing code only supports a smaller set of devices with 5718 PCI ID. Expand support for all devices with the same 5717 B0 chip ID. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 6e676a7..3004d69 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14514,7 +14514,7 @@ static int tg3_phy_probe(struct tg3 *tp) (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762 || - (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 && + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 && tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) || (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 && tp->pci_chip_rev_id != CHIPREV_ID_57765_A0))) -- cgit v0.10.2 From c5d0b72e641340c5dc915cdfab5e2c55d81425c2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 14 Feb 2013 12:13:40 +0000 Subject: tg3: Fix 5762 NVRAM sizing Don't set the default size to 128K if it is 5762. Instead, rely on the size we obtain from NVRAM location 0xf0. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3004d69..7ac0bd0 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -13883,7 +13883,8 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) tp->nvram_size = TG3_NVRAM_SIZE_1MB; break; default: - tp->nvram_size = TG3_NVRAM_SIZE_128KB; + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + tp->nvram_size = TG3_NVRAM_SIZE_128KB; break; } break; @@ -13929,7 +13930,8 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) tp->nvram_size = TG3_NVRAM_SIZE_1MB; break; default: - tp->nvram_size = TG3_NVRAM_SIZE_128KB; + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + tp->nvram_size = TG3_NVRAM_SIZE_128KB; break; } break; -- cgit v0.10.2 From 402e1398a398009d82731ec433220e172be4c7af Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 14 Feb 2013 12:13:41 +0000 Subject: tg3: Set initial carrier state to off. Before the device is opened, the carrier state should be off. It will not race with the link interrupt if we set it before calling register_netdev(). Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 7ac0bd0..3829321 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -16902,6 +16902,8 @@ static int tg3_init_one(struct pci_dev *pdev, tg3_timer_init(tp); + tg3_carrier_off(tp); + err = register_netdev(dev); if (err) { dev_err(&pdev->dev, "Cannot register net device, aborting\n"); -- cgit v0.10.2 From d887199dc28c46788b155b234274d5ff41afed8e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 14 Feb 2013 12:13:42 +0000 Subject: tg3: Update version to 3.130 Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3829321..1b59876 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -94,10 +94,10 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits) #define DRV_MODULE_NAME "tg3" #define TG3_MAJ_NUM 3 -#define TG3_MIN_NUM 129 +#define TG3_MIN_NUM 130 #define DRV_MODULE_VERSION \ __stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM) -#define DRV_MODULE_RELDATE "January 06, 2013" +#define DRV_MODULE_RELDATE "February 14, 2013" #define RESET_KIND_SHUTDOWN 0 #define RESET_KIND_INIT 1 -- cgit v0.10.2 From 15ac7c478fd227257e4be94519c6f965a9e6159d Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 15 Feb 2013 13:15:48 -0600 Subject: mac80211: Fix incorrect use of STA_PR_FMT in trace points Several tracepoints are using STA_PR_FMT where STA_PR_ARG should be used, resulting in messages like "phy0 sta:ARG TYPE NOT FIELD BUT 1". Change these to STA_PR_ARG. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 1183c4a..3d7cd2a 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -479,7 +479,7 @@ TRACE_EVENT(drv_set_tim, TP_printk( LOCAL_PR_FMT STA_PR_FMT " set:%d", - LOCAL_PR_ARG, STA_PR_FMT, __entry->set + LOCAL_PR_ARG, STA_PR_ARG, __entry->set ) ); @@ -1684,7 +1684,7 @@ TRACE_EVENT(api_sta_block_awake, TP_printk( LOCAL_PR_FMT STA_PR_FMT " block:%d", - LOCAL_PR_ARG, STA_PR_FMT, __entry->block + LOCAL_PR_ARG, STA_PR_ARG, __entry->block ) ); @@ -1782,7 +1782,7 @@ TRACE_EVENT(api_eosp, TP_printk( LOCAL_PR_FMT STA_PR_FMT, - LOCAL_PR_ARG, STA_PR_FMT + LOCAL_PR_ARG, STA_PR_ARG ) ); -- cgit v0.10.2 From 14bbd6a565e1bcdc240d44687edb93f721cfdf99 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 14 Feb 2013 09:44:49 +0000 Subject: net: Add skb_unclone() helper function. This function will be used in next GRE_GSO patch. This patch does not change any functionality. Signed-off-by: Pravin B Shelar Acked-by: Eric Dumazet diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 0b2706a..4fd754e 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -1805,8 +1805,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb) /* the filter instructions are constructed assuming a four-byte PPP header on each packet */ if (ppp->pass_filter || ppp->active_filter) { - if (skb_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) goto err; *skb_push(skb, 2) = 0; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 9da9952..ca6ee7d 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -804,6 +804,16 @@ static inline int skb_cloned(const struct sk_buff *skb) (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1; } +static inline int skb_unclone(struct sk_buff *skb, gfp_t pri) +{ + might_sleep_if(pri & __GFP_WAIT); + + if (skb_cloned(skb)) + return pskb_expand_head(skb, 0, 0, pri); + + return 0; +} + /** * skb_header_cloned - is the header a clone * @skb: buffer to check diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index a69b4e4..2e7f194 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -321,8 +321,7 @@ static int ah_input(struct xfrm_state *x, struct sk_buff *skb) /* We are going to _remove_ AH header to keep sockets happy, * so... Later this can change. */ - if (skb_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) goto out; skb->ip_summed = CHECKSUM_NONE; diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 1211613..b6d30ac 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -590,7 +590,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev, goto out_oversize; /* Head of list must not be cloned. */ - if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC)) + if (skb_unclone(head, GFP_ATOMIC)) goto out_nomem; /* If the first fragment is fragmented itself, we split diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 6182d90..fd0cea1 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1331,7 +1331,7 @@ static void __pskb_trim_head(struct sk_buff *skb, int len) /* Remove acked data from a packet in the transmit queue. */ int tcp_trim_head(struct sock *sk, struct sk_buff *skb, u32 len) { - if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) return -ENOMEM; __pskb_trim_head(skb, len); diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c index 06814b6..1f12c8b 100644 --- a/net/ipv4/xfrm4_input.c +++ b/net/ipv4/xfrm4_input.c @@ -132,7 +132,7 @@ int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb) * header and optional ESP marker bytes) and then modify the * protocol to ESP, and then call into the transform receiver. */ - if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) goto drop; /* Now we can update and verify the packet length... */ diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index ddee0a0..1162ace 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -142,8 +142,7 @@ static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) for_each_input_rcu(rcv_notify_handlers, handler) handler->handler(skb); - if (skb_cloned(skb) && - (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) + if (err = skb_unclone(skb, GFP_ATOMIC)) goto out; if (x->props.flags & XFRM_STATE_DECAP_DSCP) diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index 3842331..bb02e17 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -521,8 +521,7 @@ static int ah6_input(struct xfrm_state *x, struct sk_buff *skb) /* We are going to _remove_ AH header to keep sockets happy, * so... Later this can change. */ - if (skb_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) goto out; skb->ip_summed = CHECKSUM_NONE; diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index c674f15..b89a8c3 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -368,7 +368,7 @@ nf_ct_frag6_reasm(struct frag_queue *fq, struct net_device *dev) } /* Head of list must not be cloned. */ - if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC)) { + if (skb_unclone(head, GFP_ATOMIC)) { pr_debug("skb is cloned but can't expand head"); goto out_oom; } diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index bab2c27..e354743 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -404,7 +404,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev, goto out_oversize; /* Head of list must not be cloned. */ - if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC)) + if (skb_unclone(head, GFP_ATOMIC)) goto out_oom; /* If the first fragment is fragmented itself, we split diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c index 9f2095b..93c41a8 100644 --- a/net/ipv6/xfrm6_mode_tunnel.c +++ b/net/ipv6/xfrm6_mode_tunnel.c @@ -69,8 +69,7 @@ static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) goto out; - if (skb_cloned(skb) && - (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) + if (err = skb_unclone(skb, GFP_ATOMIC)) goto out; if (x->props.flags & XFRM_STATE_DECAP_DSCP) diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c index 0fb9e3f..e0f6de6 100644 --- a/net/sched/act_ipt.c +++ b/net/sched/act_ipt.c @@ -207,10 +207,8 @@ static int tcf_ipt(struct sk_buff *skb, const struct tc_action *a, struct tcf_ipt *ipt = a->priv; struct xt_action_param par; - if (skb_cloned(skb)) { - if (pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) - return TC_ACT_UNSPEC; - } + if (skb_unclone(skb, GFP_ATOMIC)) + return TC_ACT_UNSPEC; spin_lock(&ipt->tcf_lock); diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index 0c3fadd..7ed78c9 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -131,8 +131,7 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, int i, munged = 0; unsigned int off; - if (skb_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) return p->tcf_action; off = skb_network_offset(skb); -- cgit v0.10.2 From 05e8ef4ab2d8087d360e814d14da20b9f7fb2283 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 14 Feb 2013 09:44:55 +0000 Subject: net: factor out skb_mac_gso_segment() from skb_gso_segment() This function will be used in next GRE_GSO patch. This patch does not change any functionality. It only exports skb_mac_gso_segment() function. [ Use skb_reset_mac_len() -DaveM ] Signed-off-by: Pravin B Shelar Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9deb672..920361b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2671,6 +2671,8 @@ extern void netdev_upper_dev_unlink(struct net_device *dev, extern int skb_checksum_help(struct sk_buff *skb); extern struct sk_buff *__skb_gso_segment(struct sk_buff *skb, netdev_features_t features, bool tx_path); +extern struct sk_buff *skb_mac_gso_segment(struct sk_buff *skb, + netdev_features_t features); static inline struct sk_buff *skb_gso_segment(struct sk_buff *skb, netdev_features_t features) diff --git a/net/core/dev.c b/net/core/dev.c index f444736..67deae6 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2327,37 +2327,20 @@ out: } EXPORT_SYMBOL(skb_checksum_help); -/* openvswitch calls this on rx path, so we need a different check. - */ -static inline bool skb_needs_check(struct sk_buff *skb, bool tx_path) -{ - if (tx_path) - return skb->ip_summed != CHECKSUM_PARTIAL; - else - return skb->ip_summed == CHECKSUM_NONE; -} - /** - * __skb_gso_segment - Perform segmentation on skb. + * skb_mac_gso_segment - mac layer segmentation handler. * @skb: buffer to segment * @features: features for the output path (see dev->features) - * @tx_path: whether it is called in TX path - * - * This function segments the given skb and returns a list of segments. - * - * It may return NULL if the skb requires no segmentation. This is - * only possible when GSO is used for verifying header integrity. */ -struct sk_buff *__skb_gso_segment(struct sk_buff *skb, - netdev_features_t features, bool tx_path) +struct sk_buff *skb_mac_gso_segment(struct sk_buff *skb, + netdev_features_t features) { struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT); struct packet_offload *ptype; __be16 type = skb->protocol; - int vlan_depth = ETH_HLEN; - int err; while (type == htons(ETH_P_8021Q)) { + int vlan_depth = ETH_HLEN; struct vlan_hdr *vh; if (unlikely(!pskb_may_pull(skb, vlan_depth + VLAN_HLEN))) @@ -2368,22 +2351,14 @@ struct sk_buff *__skb_gso_segment(struct sk_buff *skb, vlan_depth += VLAN_HLEN; } - skb_reset_mac_header(skb); - skb->mac_len = skb->network_header - skb->mac_header; __skb_pull(skb, skb->mac_len); - if (unlikely(skb_needs_check(skb, tx_path))) { - skb_warn_bad_offload(skb); - - if (skb_header_cloned(skb) && - (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) - return ERR_PTR(err); - } - rcu_read_lock(); list_for_each_entry_rcu(ptype, &offload_base, list) { if (ptype->type == type && ptype->callbacks.gso_segment) { if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { + int err; + err = ptype->callbacks.gso_send_check(skb); segs = ERR_PTR(err); if (err || skb_gso_ok(skb, features)) @@ -2401,6 +2376,48 @@ struct sk_buff *__skb_gso_segment(struct sk_buff *skb, return segs; } +EXPORT_SYMBOL(skb_mac_gso_segment); + + +/* openvswitch calls this on rx path, so we need a different check. + */ +static inline bool skb_needs_check(struct sk_buff *skb, bool tx_path) +{ + if (tx_path) + return skb->ip_summed != CHECKSUM_PARTIAL; + else + return skb->ip_summed == CHECKSUM_NONE; +} + +/** + * __skb_gso_segment - Perform segmentation on skb. + * @skb: buffer to segment + * @features: features for the output path (see dev->features) + * @tx_path: whether it is called in TX path + * + * This function segments the given skb and returns a list of segments. + * + * It may return NULL if the skb requires no segmentation. This is + * only possible when GSO is used for verifying header integrity. + */ +struct sk_buff *__skb_gso_segment(struct sk_buff *skb, + netdev_features_t features, bool tx_path) +{ + if (unlikely(skb_needs_check(skb, tx_path))) { + int err; + + skb_warn_bad_offload(skb); + + if (skb_header_cloned(skb) && + (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) + return ERR_PTR(err); + } + + skb_reset_mac_header(skb); + skb_reset_mac_len(skb); + + return skb_mac_gso_segment(skb, features); +} EXPORT_SYMBOL(__skb_gso_segment); /* Take action when hardware reception checksum errors are detected. */ -- cgit v0.10.2 From 68c331631143f5f039baac99a650e0b9e1ea02b6 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 14 Feb 2013 14:02:41 +0000 Subject: v4 GRE: Add TCP segmentation offload for GRE Following patch adds GRE protocol offload handler so that skb_gso_segment() can segment GRE packets. SKB GSO CB is added to keep track of total header length so that skb_segment can push entire header. e.g. in case of GRE, skb_segment need to push inner and outer headers to every segment. New NETIF_F_GRE_GSO feature is added for devices which support HW GRE TSO offload. Currently none of devices support it therefore GRE GSO always fall backs to software GSO. [ Compute pkt_len before ip_local_out() invocation. -DaveM ] Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h index 5ac3212..3dd3934 100644 --- a/include/linux/netdev_features.h +++ b/include/linux/netdev_features.h @@ -41,7 +41,7 @@ enum { NETIF_F_TSO_ECN_BIT, /* ... TCP ECN support */ NETIF_F_TSO6_BIT, /* ... TCPv6 segmentation */ NETIF_F_FSO_BIT, /* ... FCoE segmentation */ - NETIF_F_GSO_RESERVED1, /* ... free (fill GSO_MASK to 8 bits) */ + NETIF_F_GSO_GRE_BIT, /* ... GRE with TSO */ /**/NETIF_F_GSO_LAST, /* [can't be last bit, see GSO_MASK] */ NETIF_F_GSO_RESERVED2 /* ... free (fill GSO_MASK to 8 bits) */ = NETIF_F_GSO_LAST, @@ -102,6 +102,7 @@ enum { #define NETIF_F_VLAN_CHALLENGED __NETIF_F(VLAN_CHALLENGED) #define NETIF_F_RXFCS __NETIF_F(RXFCS) #define NETIF_F_RXALL __NETIF_F(RXALL) +#define NETIF_F_GRE_GSO __NETIF_F(GSO_GRE) /* Features valid for ethtool to change */ /* = all defined minus driver/device-class-related */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index ca6ee7d..821c7f4 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -314,6 +314,8 @@ enum { SKB_GSO_TCPV6 = 1 << 4, SKB_GSO_FCOE = 1 << 5, + + SKB_GSO_GRE = 1 << 6, }; #if BITS_PER_LONG > 32 @@ -2732,6 +2734,21 @@ static inline struct sec_path *skb_sec_path(struct sk_buff *skb) } #endif +/* Keeps track of mac header offset relative to skb->head. + * It is useful for TSO of Tunneling protocol. e.g. GRE. + * For non-tunnel skb it points to skb_mac_header() and for + * tunnel skb it points to outer mac header. */ +struct skb_gso_cb { + int mac_offset; +}; +#define SKB_GSO_CB(skb) ((struct skb_gso_cb *)(skb)->cb) + +static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) +{ + return (skb_mac_header(inner_skb) - inner_skb->head) - + SKB_GSO_CB(inner_skb)->mac_offset; +} + static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/net/core/dev.c b/net/core/dev.c index 67deae6..1cd6297 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2413,6 +2413,7 @@ struct sk_buff *__skb_gso_segment(struct sk_buff *skb, return ERR_PTR(err); } + SKB_GSO_CB(skb)->mac_offset = skb_headroom(skb); skb_reset_mac_header(skb); skb_reset_mac_len(skb); diff --git a/net/core/ethtool.c b/net/core/ethtool.c index d9d5520..3e9b2c3 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -77,6 +77,7 @@ static const char netdev_features_strings[NETDEV_FEATURE_COUNT][ETH_GSTRING_LEN] [NETIF_F_TSO_ECN_BIT] = "tx-tcp-ecn-segmentation", [NETIF_F_TSO6_BIT] = "tx-tcp6-segmentation", [NETIF_F_FSO_BIT] = "tx-fcoe-segmentation", + [NETIF_F_GSO_GRE_BIT] = "tx-gre-segmentation", [NETIF_F_FCOE_CRC_BIT] = "tx-checksum-fcoe-crc", [NETIF_F_SCTP_CSUM_BIT] = "tx-checksum-sctp", diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 6c1ad09..2a3ca33 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2738,6 +2738,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features) unsigned int mss = skb_shinfo(skb)->gso_size; unsigned int doffset = skb->data - skb_mac_header(skb); unsigned int offset = doffset; + unsigned int tnl_hlen = skb_tnl_header_len(skb); unsigned int headroom; unsigned int len; int sg = !!(features & NETIF_F_SG); @@ -2814,7 +2815,10 @@ struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features) skb_set_network_header(nskb, skb->mac_len); nskb->transport_header = (nskb->network_header + skb_network_header_len(skb)); - skb_copy_from_linear_data(skb, nskb->data, doffset); + + skb_copy_from_linear_data_offset(skb, -tnl_hlen, + nskb->data - tnl_hlen, + doffset + tnl_hlen); if (fskb != skb_shinfo(skb)->frag_list) continue; diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index e6e5d85..e225a4e 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1287,6 +1287,7 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, SKB_GSO_UDP | SKB_GSO_DODGY | SKB_GSO_TCP_ECN | + SKB_GSO_GRE | 0))) goto out; diff --git a/net/ipv4/gre.c b/net/ipv4/gre.c index 42a4910..7a4c710 100644 --- a/net/ipv4/gre.c +++ b/net/ipv4/gre.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -26,6 +27,11 @@ static const struct gre_protocol __rcu *gre_proto[GREPROTO_MAX] __read_mostly; static DEFINE_SPINLOCK(gre_proto_lock); +struct gre_base_hdr { + __be16 flags; + __be16 protocol; +}; +#define GRE_HEADER_SECTION 4 int gre_add_protocol(const struct gre_protocol *proto, u8 version) { @@ -112,12 +118,117 @@ static void gre_err(struct sk_buff *skb, u32 info) rcu_read_unlock(); } +static struct sk_buff *gre_gso_segment(struct sk_buff *skb, + netdev_features_t features) +{ + struct sk_buff *segs = ERR_PTR(-EINVAL); + netdev_features_t enc_features; + int ghl = GRE_HEADER_SECTION; + struct gre_base_hdr *greh; + int mac_len = skb->mac_len; + int tnl_hlen; + bool csum; + + if (unlikely(skb_shinfo(skb)->gso_type & + ~(SKB_GSO_TCPV4 | + SKB_GSO_TCPV6 | + SKB_GSO_UDP | + SKB_GSO_DODGY | + SKB_GSO_TCP_ECN | + SKB_GSO_GRE))) + goto out; + + if (unlikely(!pskb_may_pull(skb, sizeof(*greh)))) + goto out; + + greh = (struct gre_base_hdr *)skb_transport_header(skb); + + if (greh->flags & GRE_KEY) + ghl += GRE_HEADER_SECTION; + if (greh->flags & GRE_SEQ) + ghl += GRE_HEADER_SECTION; + if (greh->flags & GRE_CSUM) { + ghl += GRE_HEADER_SECTION; + csum = true; + } else + csum = false; + + /* setup inner skb. */ + if (greh->protocol == htons(ETH_P_TEB)) { + struct ethhdr *eth = eth_hdr(skb); + skb->protocol = eth->h_proto; + } else { + skb->protocol = greh->protocol; + } + + skb->encapsulation = 0; + + if (unlikely(!pskb_may_pull(skb, ghl))) + goto out; + __skb_pull(skb, ghl); + skb_reset_mac_header(skb); + skb_set_network_header(skb, skb_inner_network_offset(skb)); + skb->mac_len = skb_inner_network_offset(skb); + + /* segment inner packet. */ + enc_features = skb->dev->hw_enc_features & netif_skb_features(skb); + segs = skb_mac_gso_segment(skb, enc_features); + if (!segs || IS_ERR(segs)) + goto out; + + skb = segs; + tnl_hlen = skb_tnl_header_len(skb); + do { + __skb_push(skb, ghl); + if (csum) { + __be32 *pcsum; + + if (skb_has_shared_frag(skb)) { + int err; + + err = __skb_linearize(skb); + if (err) { + kfree_skb(segs); + segs = ERR_PTR(err); + goto out; + } + } + + greh = (struct gre_base_hdr *)(skb->data); + pcsum = (__be32 *)(greh + 1); + *pcsum = 0; + *(__sum16 *)pcsum = csum_fold(skb_checksum(skb, 0, skb->len, 0)); + } + __skb_push(skb, tnl_hlen - ghl); + + skb_reset_mac_header(skb); + skb_set_network_header(skb, mac_len); + skb->mac_len = mac_len; + } while ((skb = skb->next)); +out: + return segs; +} + +static int gre_gso_send_check(struct sk_buff *skb) +{ + if (!skb->encapsulation) + return -EINVAL; + return 0; +} + static const struct net_protocol net_gre_protocol = { .handler = gre_rcv, .err_handler = gre_err, .netns_ok = 1, }; +static const struct net_offload gre_offload = { + .callbacks = { + .gso_send_check = gre_gso_send_check, + .gso_segment = gre_gso_segment, + }, +}; + static int __init gre_init(void) { pr_info("GRE over IPv4 demultiplexor driver\n"); @@ -127,11 +238,18 @@ static int __init gre_init(void) return -EAGAIN; } + if (inet_add_offload(&gre_offload, IPPROTO_GRE)) { + pr_err("can't add protocol offload\n"); + inet_del_protocol(&net_gre_protocol, IPPROTO_GRE); + return -EAGAIN; + } + return 0; } static void __exit gre_exit(void) { + inet_del_offload(&gre_offload, IPPROTO_GRE); inet_del_protocol(&net_gre_protocol, IPPROTO_GRE); } diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 00a14b9..a56f118 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -735,8 +735,33 @@ drop: return 0; } +static struct sk_buff *handle_offloads(struct sk_buff *skb) +{ + int err; + + if (skb_is_gso(skb)) { + err = skb_unclone(skb, GFP_ATOMIC); + if (unlikely(err)) + goto error; + skb_shinfo(skb)->gso_type |= SKB_GSO_GRE; + return skb; + } else if (skb->ip_summed == CHECKSUM_PARTIAL) { + err = skb_checksum_help(skb); + if (unlikely(err)) + goto error; + } + skb->ip_summed = CHECKSUM_NONE; + + return skb; + +error: + kfree_skb(skb); + return ERR_PTR(err); +} + static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) { + struct pcpu_tstats *tstats = this_cpu_ptr(dev->tstats); struct ip_tunnel *tunnel = netdev_priv(dev); const struct iphdr *old_iph; const struct iphdr *tiph; @@ -751,10 +776,19 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev __be32 dst; int mtu; u8 ttl; + int err; + int pkt_len; - if (skb->ip_summed == CHECKSUM_PARTIAL && - skb_checksum_help(skb)) - goto tx_error; + skb = handle_offloads(skb); + if (IS_ERR(skb)) { + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + if (!skb->encapsulation) { + skb_reset_inner_headers(skb); + skb->encapsulation = 1; + } old_iph = ip_hdr(skb); @@ -855,7 +889,8 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev if (skb->protocol == htons(ETH_P_IP)) { df |= (old_iph->frag_off&htons(IP_DF)); - if ((old_iph->frag_off&htons(IP_DF)) && + if (!skb_is_gso(skb) && + (old_iph->frag_off&htons(IP_DF)) && mtu < ntohs(old_iph->tot_len)) { icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); ip_rt_put(rt); @@ -875,7 +910,9 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev } } - if (mtu >= IPV6_MIN_MTU && mtu < skb->len - tunnel->hlen + gre_hlen) { + if (!skb_is_gso(skb) && + mtu >= IPV6_MIN_MTU && + mtu < skb->len - tunnel->hlen + gre_hlen) { icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); ip_rt_put(rt); goto tx_error; @@ -936,6 +973,7 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev iph->daddr = fl4.daddr; iph->saddr = fl4.saddr; iph->ttl = ttl; + iph->id = 0; if (ttl == 0) { if (skb->protocol == htons(ETH_P_IP)) @@ -964,9 +1002,19 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev *ptr = tunnel->parms.o_key; ptr--; } - if (tunnel->parms.o_flags&GRE_CSUM) { + /* Skip GRE checksum if skb is getting offloaded. */ + if (!(skb_shinfo(skb)->gso_type & SKB_GSO_GRE) && + (tunnel->parms.o_flags&GRE_CSUM)) { int offset = skb_transport_offset(skb); + if (skb_has_shared_frag(skb)) { + err = __skb_linearize(skb); + if (err) { + ip_rt_put(rt); + goto tx_error; + } + } + *ptr = 0; *(__sum16 *)ptr = csum_fold(skb_checksum(skb, offset, skb->len - offset, @@ -974,7 +1022,19 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev } } - iptunnel_xmit(skb, dev); + nf_reset(skb); + + pkt_len = skb->len - skb_transport_offset(skb); + err = ip_local_out(skb); + if (likely(net_xmit_eval(err) == 0)) { + u64_stats_update_begin(&tstats->syncp); + tstats->tx_bytes += pkt_len; + tstats->tx_packets++; + u64_stats_update_end(&tstats->syncp); + } else { + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + } return NETDEV_TX_OK; #if IS_ENABLED(CONFIG_IPV6) @@ -1044,6 +1104,11 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev) mtu = 68; tunnel->hlen = addend; + /* TCP offload with GRE SEQ is not supported. */ + if (!(tunnel->parms.o_flags & GRE_SEQ)) { + dev->features |= NETIF_F_GSO_SOFTWARE; + dev->hw_features |= NETIF_F_GSO_SOFTWARE; + } return mtu; } @@ -1593,6 +1658,9 @@ static void ipgre_tap_setup(struct net_device *dev) dev->iflink = 0; dev->features |= NETIF_F_NETNS_LOCAL; + + dev->features |= GRE_FEATURES; + dev->hw_features |= GRE_FEATURES; } static int ipgre_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 1f0bedb..7a5ba48 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3043,6 +3043,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, SKB_GSO_DODGY | SKB_GSO_TCP_ECN | SKB_GSO_TCPV6 | + SKB_GSO_GRE | 0) || !(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))) goto out; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 6791aac..39a5e7a 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2305,7 +2305,8 @@ struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb, /* Packet is from an untrusted source, reset gso_segs. */ int type = skb_shinfo(skb)->gso_type; - if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY) || + if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY | + SKB_GSO_GRE) || !(type & (SKB_GSO_UDP)))) goto out; diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index f26f0da..8234c1d 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -99,6 +99,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, ~(SKB_GSO_UDP | SKB_GSO_DODGY | SKB_GSO_TCP_ECN | + SKB_GSO_GRE | SKB_GSO_TCPV6 | 0))) goto out; diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c index 0c8934a..cf05cf0 100644 --- a/net/ipv6/udp_offload.c +++ b/net/ipv6/udp_offload.c @@ -56,7 +56,8 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, /* Packet is from an untrusted source, reset gso_segs. */ int type = skb_shinfo(skb)->gso_type; - if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY) || + if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY | + SKB_GSO_GRE) || !(type & (SKB_GSO_UDP)))) goto out; -- cgit v0.10.2 From 506f669c58989152ce46603327bfd2f2a794fd38 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Thu, 14 Feb 2013 23:00:13 +0000 Subject: stmmac: fix the parsing of the eee_timer parameter This pacth fixes the parsing of the eee_timer driver parameter. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b75f4b2..601dd84 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2254,7 +2254,7 @@ static int __init stmmac_cmdline_opt(char *str) } else if (!strncmp(opt, "pause:", 6)) { if (kstrtoint(opt + 6, 0, &pause)) goto err; - } else if (!strncmp(opt, "eee_timer:", 6)) { + } else if (!strncmp(opt, "eee_timer:", 10)) { if (kstrtoint(opt + 10, 0, &eee_timer)) goto err; } -- cgit v0.10.2 From c14dd2680baaef02aa4d221a2b5d337fbfd71b00 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 15 Feb 2013 03:03:29 +0000 Subject: ieee802154: at86rf230: Remove empty suspend/resume callbacks There is no need to implement empty suspend/resume callbacks if there is nothing to do during suspend/resume. The drivers will behave the same with no callbacks or empty callbacks during suspend/resume. Signed-off-by: Lars-Peter Clausen Signed-off-by: David S. Miller diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index a4a62e1..fc1687e 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -751,16 +751,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) return 0; } -static int at86rf230_suspend(struct spi_device *spi, pm_message_t message) -{ - return 0; -} - -static int at86rf230_resume(struct spi_device *spi) -{ - return 0; -} - static int at86rf230_fill_data(struct spi_device *spi) { struct at86rf230_local *lp = spi_get_drvdata(spi); @@ -948,8 +938,6 @@ static struct spi_driver at86rf230_driver = { }, .probe = at86rf230_probe, .remove = at86rf230_remove, - .suspend = at86rf230_suspend, - .resume = at86rf230_resume, }; module_spi_driver(at86rf230_driver); -- cgit v0.10.2 From efd9450e7e36717f24dff3bd584faa80a85231d6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 14 Feb 2013 17:31:48 +0000 Subject: net: use skb_reset_mac_len() in dev_gro_receive() We no longer need to use mac_len, lets cleanup things. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 1cd6297..6ad3789 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3802,7 +3802,6 @@ static enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff __be16 type = skb->protocol; struct list_head *head = &offload_base; int same_flow; - int mac_len; enum gro_result ret; if (!(skb->dev->features & NETIF_F_GRO) || netpoll_rx_on(skb)) @@ -3819,8 +3818,7 @@ static enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff continue; skb_set_network_header(skb, skb_gro_offset(skb)); - mac_len = skb->network_header - skb->mac_header; - skb->mac_len = mac_len; + skb_reset_mac_len(skb); NAPI_GRO_CB(skb)->same_flow = 0; NAPI_GRO_CB(skb)->flush = 0; NAPI_GRO_CB(skb)->free = 0; -- cgit v0.10.2 From c5c73dca596894c47760e4e955877b731ffabf57 Mon Sep 17 00:00:00 2001 From: Erik Hugne Date: Thu, 14 Feb 2013 14:43:33 +0000 Subject: tipc: fix missing spinlock init in broadcast code After commit 3c294cb3 "tipc: remove the bearer congestion mechanism", we try to grab the broadcast bearer lock when sending multicast messages over the broadcast link. This will cause an oops because the lock is never initialized. This is an old bug, but the lock was never actually used before commit 3c294cb3, so that why it was not visible until now. The oops will look something like: BUG: spinlock bad magic on CPU#2, daemon/147 lock: bcast_bearer+0x48/0xffffffffffffd19a [tipc], .magic: 00000000, .owner: /-1, .owner_cpu: 0 Pid: 147, comm: daemon Not tainted 3.8.0-rc3+ #206 Call Trace: spin_dump+0x8a/0x8f spin_bug+0x21/0x26 do_raw_spin_lock+0x114/0x150 _raw_spin_lock_bh+0x19/0x20 tipc_bearer_blocked+0x1f/0x40 [tipc] tipc_link_send_buf+0x82/0x280 [tipc] ? __alloc_skb+0x9f/0x2b0 tipc_bclink_send_msg+0x77/0xa0 [tipc] tipc_multicast+0x11b/0x1b0 [tipc] send_msg+0x225/0x530 [tipc] sock_sendmsg+0xca/0xe0 The above can be triggered by running the multicast demo program. Signed-off-by: Erik Hugne Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c index 54f89f9..2655c9f 100644 --- a/net/tipc/bcast.c +++ b/net/tipc/bcast.c @@ -774,6 +774,7 @@ void tipc_bclink_init(void) bcl->owner = &bclink->node; bcl->max_pkt = MAX_PKT_DEFAULT_MCAST; tipc_link_set_queue_limits(bcl, BCLINK_WIN_DEFAULT); + spin_lock_init(&bcbearer->bearer.lock); bcl->b_ptr = &bcbearer->bearer; bcl->state = WORKING_WORKING; strlcpy(bcl->name, tipc_bclink_name, TIPC_MAX_LINK_NAME); -- cgit v0.10.2 From 57467e56293796f780e91a24600a732516f534ac Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Sun, 20 Jan 2013 23:30:08 +0100 Subject: tipc: eliminate duplicated discard_rx_queue routine The tipc function discard_rx_queue() is just a duplicated implementation of __skb_queue_purge(). Remove the former and directly invoke __skb_queue_purge(). In doing so, the underscores convey to the code reader, more information about the current locking state that is assumed. Signed-off-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: Paul Gortmaker diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 9b4e483..f6ceecd 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -129,19 +129,6 @@ static void advance_rx_queue(struct sock *sk) } /** - * discard_rx_queue - discard all buffers in socket receive queue - * - * Caller must hold socket lock - */ -static void discard_rx_queue(struct sock *sk) -{ - struct sk_buff *buf; - - while ((buf = __skb_dequeue(&sk->sk_receive_queue))) - kfree_skb(buf); -} - -/** * reject_rx_queue - reject all buffers in socket receive queue * * Caller must hold socket lock @@ -292,7 +279,7 @@ static int release(struct socket *sock) res = tipc_deleteport(tport->ref); /* Discard any remaining (connection-based) messages in receive queue */ - discard_rx_queue(sk); + __skb_queue_purge(&sk->sk_receive_queue); /* Reject any messages that accumulated in backlog queue */ sock->state = SS_DISCONNECTING; @@ -1637,7 +1624,7 @@ restart: case SS_DISCONNECTING: /* Discard any unreceived messages */ - discard_rx_queue(sk); + __skb_queue_purge(&sk->sk_receive_queue); /* Wake up anyone sleeping in poll */ sk->sk_state_change(sk); -- cgit v0.10.2 From aba79f332f46ca8529f3e62a9fc2926c8fe75e44 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Sun, 20 Jan 2013 23:30:09 +0100 Subject: tipc: byte-based overload control on socket receive queue Change overload control to be purely byte-based, using sk->sk_rmem_alloc as byte counter, and compare it to a calculated upper limit for the socket receive queue. For all connection messages, irrespective of message importance, the overload limit is set to a constant value (i.e, 67MB). This limit should normally never be reached because of the lower limit used by the flow control algorithm, and is there only as a last resort in case a faulty peer doesn't respect the send window limit. For datagram messages, message importance is taken into account when calculating the overload limit. The calculation is based on sk->sk_rcvbuf, and is hence configurable via the socket option SO_RCVBUF. Cc: Neil Horman Signed-off-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: Paul Gortmaker diff --git a/net/tipc/socket.c b/net/tipc/socket.c index f6ceecd..cbe2f6e 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -43,7 +43,8 @@ #define SS_LISTENING -1 /* socket is listening */ #define SS_READY -2 /* socket is connectionless */ -#define OVERLOAD_LIMIT_BASE 10000 +#define CONN_OVERLOAD_LIMIT ((TIPC_FLOW_CONTROL_WIN * 2 + 1) * \ + SKB_TRUESIZE(TIPC_MAX_USER_MSG_SIZE)) #define CONN_TIMEOUT_DEFAULT 8000 /* default connect timeout = 8s */ struct tipc_sock { @@ -202,7 +203,6 @@ static int tipc_create(struct net *net, struct socket *sock, int protocol, sock_init_data(sock, sk); sk->sk_backlog_rcv = backlog_rcv; - sk->sk_rcvbuf = TIPC_FLOW_CONTROL_WIN * 2 * TIPC_MAX_USER_MSG_SIZE * 2; sk->sk_data_ready = tipc_data_ready; sk->sk_write_space = tipc_write_space; tipc_sk(sk)->p = tp_ptr; @@ -1142,34 +1142,6 @@ static void tipc_data_ready(struct sock *sk, int len) } /** - * rx_queue_full - determine if receive queue can accept another message - * @msg: message to be added to queue - * @queue_size: current size of queue - * @base: nominal maximum size of queue - * - * Returns 1 if queue is unable to accept message, 0 otherwise - */ -static int rx_queue_full(struct tipc_msg *msg, u32 queue_size, u32 base) -{ - u32 threshold; - u32 imp = msg_importance(msg); - - if (imp == TIPC_LOW_IMPORTANCE) - threshold = base; - else if (imp == TIPC_MEDIUM_IMPORTANCE) - threshold = base * 2; - else if (imp == TIPC_HIGH_IMPORTANCE) - threshold = base * 100; - else - return 0; - - if (msg_connected(msg)) - threshold *= 4; - - return queue_size >= threshold; -} - -/** * filter_connect - Handle all incoming messages for a connection-based socket * @tsock: TIPC socket * @msg: message @@ -1247,6 +1219,36 @@ static u32 filter_connect(struct tipc_sock *tsock, struct sk_buff **buf) } /** + * rcvbuf_limit - get proper overload limit of socket receive queue + * @sk: socket + * @buf: message + * + * For all connection oriented messages, irrespective of importance, + * the default overload value (i.e. 67MB) is set as limit. + * + * For all connectionless messages, by default new queue limits are + * as belows: + * + * TIPC_LOW_IMPORTANCE (5MB) + * TIPC_MEDIUM_IMPORTANCE (10MB) + * TIPC_HIGH_IMPORTANCE (20MB) + * TIPC_CRITICAL_IMPORTANCE (40MB) + * + * Returns overload limit according to corresponding message importance + */ +static unsigned int rcvbuf_limit(struct sock *sk, struct sk_buff *buf) +{ + struct tipc_msg *msg = buf_msg(buf); + unsigned int limit; + + if (msg_connected(msg)) + limit = CONN_OVERLOAD_LIMIT; + else + limit = sk->sk_rcvbuf << (msg_importance(msg) + 5); + return limit; +} + +/** * filter_rcv - validate incoming message * @sk: socket * @buf: message @@ -1262,7 +1264,7 @@ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf) { struct socket *sock = sk->sk_socket; struct tipc_msg *msg = buf_msg(buf); - u32 recv_q_len; + unsigned int limit = rcvbuf_limit(sk, buf); u32 res = TIPC_OK; /* Reject message if it is wrong sort of message for socket */ @@ -1279,15 +1281,13 @@ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf) } /* Reject message if there isn't room to queue it */ - recv_q_len = skb_queue_len(&sk->sk_receive_queue); - if (unlikely(recv_q_len >= (OVERLOAD_LIMIT_BASE / 2))) { - if (rx_queue_full(msg, recv_q_len, OVERLOAD_LIMIT_BASE / 2)) - return TIPC_ERR_OVERLOAD; - } + if (sk_rmem_alloc_get(sk) + buf->truesize >= limit) + return TIPC_ERR_OVERLOAD; - /* Enqueue message (finally!) */ + /* Enqueue message */ TIPC_SKB_CB(buf)->handle = 0; __skb_queue_tail(&sk->sk_receive_queue, buf); + skb_set_owner_r(buf, sk); sk->sk_data_ready(sk, 0); return TIPC_OK; @@ -1336,7 +1336,7 @@ static u32 dispatch(struct tipc_port *tport, struct sk_buff *buf) if (!sock_owned_by_user(sk)) { res = filter_rcv(sk, buf); } else { - if (sk_add_backlog(sk, buf, sk->sk_rcvbuf)) + if (sk_add_backlog(sk, buf, rcvbuf_limit(sk, buf))) res = TIPC_ERR_OVERLOAD; else res = TIPC_OK; @@ -1570,6 +1570,7 @@ static int accept(struct socket *sock, struct socket *new_sock, int flags) } else { __skb_dequeue(&sk->sk_receive_queue); __skb_queue_head(&new_sk->sk_receive_queue, buf); + skb_set_owner_r(buf, new_sk); } release_sock(new_sk); -- cgit v0.10.2 From 97f8b87e9108485a0b7070645662253561304458 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Thu, 31 Jan 2013 21:51:47 +0100 Subject: tipc: remove redundant checking for the number of iovecs in a send request As the number of iovecs in a send request is already limited within UIO_MAXIOV(i.e. 1024) in __sys_sendmsg(), it's unnecessary to check it again in TIPC stack. Signed-off-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: Paul Gortmaker diff --git a/net/tipc/socket.c b/net/tipc/socket.c index cbe2f6e..a9622b6 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -503,8 +503,7 @@ static int send_msg(struct kiocb *iocb, struct socket *sock, if (unlikely((m->msg_namelen < sizeof(*dest)) || (dest->family != AF_TIPC))) return -EINVAL; - if ((total_len > TIPC_MAX_USER_MSG_SIZE) || - (m->msg_iovlen > (unsigned int)INT_MAX)) + if (total_len > TIPC_MAX_USER_MSG_SIZE) return -EMSGSIZE; if (iocb) @@ -612,8 +611,7 @@ static int send_packet(struct kiocb *iocb, struct socket *sock, if (unlikely(dest)) return send_msg(iocb, sock, m, total_len); - if ((total_len > TIPC_MAX_USER_MSG_SIZE) || - (m->msg_iovlen > (unsigned int)INT_MAX)) + if (total_len > TIPC_MAX_USER_MSG_SIZE) return -EMSGSIZE; if (iocb) @@ -698,8 +696,7 @@ static int send_stream(struct kiocb *iocb, struct socket *sock, goto exit; } - if ((total_len > (unsigned int)INT_MAX) || - (m->msg_iovlen > (unsigned int)INT_MAX)) { + if (total_len > (unsigned int)INT_MAX) { res = -EMSGSIZE; goto exit; } -- cgit v0.10.2 From 6cfbd97b3e891ed5a70b43b7a237341f4c09cbf1 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Sat, 9 Feb 2013 12:49:21 +0000 Subject: e1000: fix whitespace issues and multi-line comments Fixes whitespace issues, such as lines exceeding 80 chars, needless blank lines and the use of spaces where tabs are needed. In addition, fix multi-line comments to align with the networking standard. Signed-off-by: Jeff Kirsher Tested-by: Aaron Brown diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index 2b6cd02..26d9cd5 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -81,68 +81,69 @@ struct e1000_adapter; #include "e1000_hw.h" -#define E1000_MAX_INTR 10 +#define E1000_MAX_INTR 10 /* TX/RX descriptor defines */ -#define E1000_DEFAULT_TXD 256 -#define E1000_MAX_TXD 256 -#define E1000_MIN_TXD 48 -#define E1000_MAX_82544_TXD 4096 +#define E1000_DEFAULT_TXD 256 +#define E1000_MAX_TXD 256 +#define E1000_MIN_TXD 48 +#define E1000_MAX_82544_TXD 4096 -#define E1000_DEFAULT_RXD 256 -#define E1000_MAX_RXD 256 -#define E1000_MIN_RXD 48 -#define E1000_MAX_82544_RXD 4096 +#define E1000_DEFAULT_RXD 256 +#define E1000_MAX_RXD 256 +#define E1000_MIN_RXD 48 +#define E1000_MAX_82544_RXD 4096 #define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */ #define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */ /* this is the size past which hardware will drop packets when setting LPE=0 */ -#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 /* Supported Rx Buffer Sizes */ -#define E1000_RXBUFFER_128 128 /* Used for packet split */ -#define E1000_RXBUFFER_256 256 /* Used for packet split */ -#define E1000_RXBUFFER_512 512 -#define E1000_RXBUFFER_1024 1024 -#define E1000_RXBUFFER_2048 2048 -#define E1000_RXBUFFER_4096 4096 -#define E1000_RXBUFFER_8192 8192 -#define E1000_RXBUFFER_16384 16384 +#define E1000_RXBUFFER_128 128 /* Used for packet split */ +#define E1000_RXBUFFER_256 256 /* Used for packet split */ +#define E1000_RXBUFFER_512 512 +#define E1000_RXBUFFER_1024 1024 +#define E1000_RXBUFFER_2048 2048 +#define E1000_RXBUFFER_4096 4096 +#define E1000_RXBUFFER_8192 8192 +#define E1000_RXBUFFER_16384 16384 /* SmartSpeed delimiters */ -#define E1000_SMARTSPEED_DOWNSHIFT 3 -#define E1000_SMARTSPEED_MAX 15 +#define E1000_SMARTSPEED_DOWNSHIFT 3 +#define E1000_SMARTSPEED_MAX 15 /* Packet Buffer allocations */ -#define E1000_PBA_BYTES_SHIFT 0xA -#define E1000_TX_HEAD_ADDR_SHIFT 7 -#define E1000_PBA_TX_MASK 0xFFFF0000 +#define E1000_PBA_BYTES_SHIFT 0xA +#define E1000_TX_HEAD_ADDR_SHIFT 7 +#define E1000_PBA_TX_MASK 0xFFFF0000 /* Flow Control Watermarks */ -#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */ -#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */ +#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */ +#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */ -#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */ +#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */ /* How many Tx Descriptors do we need to call netif_wake_queue ? */ #define E1000_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ +#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define AUTO_ALL_MODES 0 -#define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 +#define E1000_EEPROM_82544_APM 0x0004 +#define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE /* Switch to override PHY master/slave setting */ #define E1000_MASTER_SLAVE e1000_ms_hw_default #endif -#define E1000_MNG_VLAN_NONE (-1) +#define E1000_MNG_VLAN_NONE (-1) /* wrapper around a pointer to a socket buffer, - * so a DMA handle can be stored along with the buffer */ + * so a DMA handle can be stored along with the buffer + */ struct e1000_buffer { struct sk_buff *skb; dma_addr_t dma; diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 14e3051..43462d5 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -115,12 +115,12 @@ static int e1000_get_settings(struct net_device *netdev, if (hw->media_type == e1000_media_type_copper) { ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full| - SUPPORTED_Autoneg | - SUPPORTED_TP); + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP); ecmd->advertising = ADVERTISED_TP; if (hw->autoneg == 1) { @@ -161,8 +161,8 @@ static int e1000_get_settings(struct net_device *netdev, ethtool_cmd_speed_set(ecmd, adapter->link_speed); /* unfortunately FULL_DUPLEX != DUPLEX_FULL - * and HALF_DUPLEX != DUPLEX_HALF */ - + * and HALF_DUPLEX != DUPLEX_HALF + */ if (adapter->link_duplex == FULL_DUPLEX) ecmd->duplex = DUPLEX_FULL; else @@ -179,8 +179,7 @@ static int e1000_get_settings(struct net_device *netdev, if ((hw->media_type == e1000_media_type_copper) && netif_carrier_ok(netdev)) ecmd->eth_tp_mdix = (!!adapter->phy_info.mdix_mode ? - ETH_TP_MDI_X : - ETH_TP_MDI); + ETH_TP_MDI_X : ETH_TP_MDI); else ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; @@ -197,8 +196,7 @@ static int e1000_set_settings(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - /* - * MDI setting is only allowed when autoneg enabled because + /* MDI setting is only allowed when autoneg enabled because * some hardware doesn't allow MDI setting when speed or * duplex is forced. */ @@ -224,8 +222,8 @@ static int e1000_set_settings(struct net_device *netdev, ADVERTISED_Autoneg; else hw->autoneg_advertised = ecmd->advertising | - ADVERTISED_TP | - ADVERTISED_Autoneg; + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->autoneg_advertised; } else { u32 speed = ethtool_cmd_speed(ecmd); @@ -260,8 +258,7 @@ static u32 e1000_get_link(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - /* - * If the link is not reported up to netdev, interrupts are disabled, + /* If the link is not reported up to netdev, interrupts are disabled, * and so the physical link state may have changed since we last * looked. Set get_link_status to make sure that the true link * state is interrogated, rather than pulling a cached and possibly @@ -484,7 +481,7 @@ static int e1000_get_eeprom(struct net_device *netdev, le16_to_cpus(&eeprom_buff[i]); memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), - eeprom->len); + eeprom->len); kfree(eeprom_buff); return ret_val; @@ -517,15 +514,17 @@ static int e1000_set_eeprom(struct net_device *netdev, ptr = (void *)eeprom_buff; if (eeprom->offset & 1) { - /* need read/modify/write of first changed EEPROM word */ - /* only the second byte of the word is being modified */ + /* need read/modify/write of first changed EEPROM word + * only the second byte of the word is being modified + */ ret_val = e1000_read_eeprom(hw, first_word, 1, &eeprom_buff[0]); ptr++; } if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { - /* need read/modify/write of last changed EEPROM word */ - /* only the first byte of the word is being modified */ + /* need read/modify/write of last changed EEPROM word + * only the first byte of the word is being modified + */ ret_val = e1000_read_eeprom(hw, last_word, 1, &eeprom_buff[last_word - first_word]); } @@ -606,11 +605,13 @@ static int e1000_set_ringparam(struct net_device *netdev, rx_old = adapter->rx_ring; err = -ENOMEM; - txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL); + txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), + GFP_KERNEL); if (!txdr) goto err_alloc_tx; - rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL); + rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), + GFP_KERNEL); if (!rxdr) goto err_alloc_rx; @@ -619,12 +620,12 @@ static int e1000_set_ringparam(struct net_device *netdev, rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ? - E1000_MAX_RXD : E1000_MAX_82544_RXD)); + E1000_MAX_RXD : E1000_MAX_82544_RXD)); rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD); txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ? - E1000_MAX_TXD : E1000_MAX_82544_TXD)); + E1000_MAX_TXD : E1000_MAX_82544_TXD)); txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); for (i = 0; i < adapter->num_tx_queues; i++) @@ -642,7 +643,8 @@ static int e1000_set_ringparam(struct net_device *netdev, goto err_setup_tx; /* save the new, restore the old in order to free it, - * then restore the new back again */ + * then restore the new back again + */ adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; @@ -784,7 +786,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); if (hw->mac_type >= e1000_82543) { - REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); @@ -795,14 +796,11 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, 0xFFFFFFFF); } - } else { - REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF); REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF); REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF); - } value = E1000_MC_TBL_SIZE; @@ -858,13 +856,14 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) *data = 0; - /* NOTE: we don't test MSI interrupts here, yet */ - /* Hook up test interrupt handler just for this test */ + /* NOTE: we don't test MSI interrupts here, yet + * Hook up test interrupt handler just for this test + */ if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, - netdev)) + netdev)) shared_int = false; else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, - netdev->name, netdev)) { + netdev->name, netdev)) { *data = 1; return -1; } @@ -1253,14 +1252,15 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ + E1000_CTRL_FD); /* Force Duplex to FULL */ if (hw->media_type == e1000_media_type_copper && hw->phy_type == e1000_phy_m88) ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ else { /* Set the ILOS bit on the fiber Nic is half - * duplex link is detected. */ + * duplex link is detected. + */ stat_reg = er32(STATUS); if ((stat_reg & E1000_STATUS_FD) == 0) ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); @@ -1446,7 +1446,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) ret_val = e1000_check_lbtest_frame( rxdr->buffer_info[l].skb, - 1024); + 1024); if (!ret_val) good_cnt++; if (unlikely(++l == rxdr->count)) l = 0; @@ -1493,7 +1493,8 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) hw->serdes_has_link = false; /* On some blade server designs, link establishment - * could take as long as 2-3 minutes */ + * could take as long as 2-3 minutes + */ do { e1000_check_for_link(hw); if (hw->serdes_has_link) @@ -1545,7 +1546,8 @@ static void e1000_diag_test(struct net_device *netdev, e_info(hw, "offline testing starting\n"); /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ + * interfere with test result + */ if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1639,7 +1641,8 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, default: /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B - * so exclude FUNC_1 ports from having WoL enabled */ + * so exclude FUNC_1 ports from having WoL enabled + */ if (er32(STATUS) & E1000_STATUS_FUNC_1 && !adapter->eeprom_wol) { wol->supported = 0; @@ -1663,7 +1666,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->wolopts = 0; /* this function will set ->supported = 0 and return 1 if wol is not - * supported by this hardware */ + * supported by this hardware + */ if (e1000_wol_exclusion(adapter, wol) || !device_can_wakeup(&adapter->pdev->dev)) return; @@ -1839,7 +1843,7 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, data[i] = (e1000_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } -/* BUG_ON(i != E1000_STATS_LEN); */ +/* BUG_ON(i != E1000_STATS_LEN); */ } static void e1000_get_strings(struct net_device *netdev, u32 stringset, @@ -1859,37 +1863,37 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset, ETH_GSTRING_LEN); p += ETH_GSTRING_LEN; } -/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ + /* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ break; } } static const struct ethtool_ops e1000_ethtool_ops = { - .get_settings = e1000_get_settings, - .set_settings = e1000_set_settings, - .get_drvinfo = e1000_get_drvinfo, - .get_regs_len = e1000_get_regs_len, - .get_regs = e1000_get_regs, - .get_wol = e1000_get_wol, - .set_wol = e1000_set_wol, - .get_msglevel = e1000_get_msglevel, - .set_msglevel = e1000_set_msglevel, - .nway_reset = e1000_nway_reset, - .get_link = e1000_get_link, - .get_eeprom_len = e1000_get_eeprom_len, - .get_eeprom = e1000_get_eeprom, - .set_eeprom = e1000_set_eeprom, - .get_ringparam = e1000_get_ringparam, - .set_ringparam = e1000_set_ringparam, - .get_pauseparam = e1000_get_pauseparam, - .set_pauseparam = e1000_set_pauseparam, - .self_test = e1000_diag_test, - .get_strings = e1000_get_strings, - .set_phys_id = e1000_set_phys_id, - .get_ethtool_stats = e1000_get_ethtool_stats, - .get_sset_count = e1000_get_sset_count, - .get_coalesce = e1000_get_coalesce, - .set_coalesce = e1000_set_coalesce, + .get_settings = e1000_get_settings, + .set_settings = e1000_set_settings, + .get_drvinfo = e1000_get_drvinfo, + .get_regs_len = e1000_get_regs_len, + .get_regs = e1000_get_regs, + .get_wol = e1000_get_wol, + .set_wol = e1000_set_wol, + .get_msglevel = e1000_get_msglevel, + .set_msglevel = e1000_set_msglevel, + .nway_reset = e1000_nway_reset, + .get_link = e1000_get_link, + .get_eeprom_len = e1000_get_eeprom_len, + .get_eeprom = e1000_get_eeprom, + .set_eeprom = e1000_set_eeprom, + .get_ringparam = e1000_get_ringparam, + .set_ringparam = e1000_set_ringparam, + .get_pauseparam = e1000_get_pauseparam, + .set_pauseparam = e1000_set_pauseparam, + .self_test = e1000_diag_test, + .get_strings = e1000_get_strings, + .set_phys_id = e1000_set_phys_id, + .get_ethtool_stats = e1000_get_ethtool_stats, + .get_sset_count = e1000_get_sset_count, + .get_coalesce = e1000_get_coalesce, + .set_coalesce = e1000_set_coalesce, .get_ts_info = ethtool_op_get_ts_info, }; diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index 8fedd24..2879b96 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -164,8 +164,9 @@ static void e1000_phy_init_script(struct e1000_hw *hw) if (hw->phy_init_script) { msleep(20); - /* Save off the current value of register 0x2F5B to be restored at - * the end of this routine. */ + /* Save off the current value of register 0x2F5B to be restored + * at the end of this routine. + */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); /* Disabled the PHY transmitter */ @@ -466,7 +467,8 @@ s32 e1000_reset_hw(struct e1000_hw *hw) case e1000_82541: case e1000_82541_rev_2: /* These controllers can't ack the 64-bit write when issuing the - * reset, so use IO-mapping as a workaround to issue the reset */ + * reset, so use IO-mapping as a workaround to issue the reset + */ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); break; case e1000_82545_rev_3: @@ -480,9 +482,9 @@ s32 e1000_reset_hw(struct e1000_hw *hw) break; } - /* After MAC reset, force reload of EEPROM to restore power-on settings to - * device. Later controllers reload the EEPROM automatically, so just wait - * for reload to complete. + /* After MAC reset, force reload of EEPROM to restore power-on settings + * to device. Later controllers reload the EEPROM automatically, so + * just wait for reload to complete. */ switch (hw->mac_type) { case e1000_82542_rev2_0: @@ -591,8 +593,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) msleep(5); } - /* Setup the receive address. This involves initializing all of the Receive - * Address Registers (RARs 0 - 15). + /* Setup the receive address. This involves initializing all of the + * Receive Address Registers (RARs 0 - 15). */ e1000_init_rx_addrs(hw); @@ -611,7 +613,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) for (i = 0; i < mta_size; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* use write flush to prevent Memory Write Block (MWB) from - * occurring when accessing our register space */ + * occurring when accessing our register space + */ E1000_WRITE_FLUSH(); } @@ -630,7 +633,9 @@ s32 e1000_init_hw(struct e1000_hw *hw) case e1000_82546_rev_3: break; default: - /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ + /* Workaround for PCI-X problem when BIOS sets MMRBC + * incorrectly. + */ if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048) e1000_pcix_set_mmrbc(hw, 2048); @@ -660,7 +665,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { ctrl_ext = er32(CTRL_EXT); /* Relaxed ordering must be disabled to avoid a parity - * error crash in a PCI slot. */ + * error crash in a PCI slot. + */ ctrl_ext |= E1000_CTRL_EXT_RO_DIS; ew32(CTRL_EXT, ctrl_ext); } @@ -810,8 +816,9 @@ s32 e1000_setup_link(struct e1000_hw *hw) ew32(FCRTL, 0); ew32(FCRTH, 0); } else { - /* We need to set up the Receive Threshold high and low water marks - * as well as (optionally) enabling the transmission of XON frames. + /* We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. */ if (hw->fc_send_xon) { ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); @@ -868,42 +875,46 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) e1000_config_collision_dist(hw); /* Check for a software override of the flow control settings, and setup - * the device accordingly. If auto-negotiation is enabled, then software - * will have to set the "PAUSE" bits to the correct value in the Tranmsit - * Config Word Register (TXCW) and re-start auto-negotiation. However, if - * auto-negotiation is disabled, then software will have to manually - * configure the two flow control enable bits in the CTRL register. + * the device accordingly. If auto-negotiation is enabled, then + * software will have to set the "PAUSE" bits to the correct value in + * the Tranmsit Config Word Register (TXCW) and re-start + * auto-negotiation. However, if auto-negotiation is disabled, then + * software will have to manually configure the two flow control enable + * bits in the CTRL register. * * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, but - * not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we do - * not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, but + * not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we do + * not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. */ switch (hw->fc) { case E1000_FC_NONE: - /* Flow control is completely disabled by a software over-ride. */ + /* Flow ctrl is completely disabled by a software over-ride */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; case E1000_FC_RX_PAUSE: - /* RX Flow control is enabled and TX Flow control is disabled by a - * software over-ride. Since there really isn't a way to advertise - * that we are capable of RX Pause ONLY, we will advertise that we - * support both symmetric and asymmetric RX PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. + /* Rx Flow control is enabled and Tx Flow control is disabled by + * a software over-ride. Since there really isn't a way to + * advertise that we are capable of Rx Pause ONLY, we will + * advertise that we support both symmetric and asymmetric Rx + * PAUSE. Later, we will disable the adapter's ability to send + * PAUSE frames. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; case E1000_FC_TX_PAUSE: - /* TX Flow control is enabled, and RX Flow control is disabled, by a - * software over-ride. + /* Tx Flow control is enabled, and Rx Flow control is disabled, + * by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; case E1000_FC_FULL: - /* Flow control (both RX and TX) is enabled by a software over-ride. */ + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; default: @@ -912,11 +923,11 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) break; } - /* Since auto-negotiation is enabled, take the link out of reset (the link - * will be in reset, because we previously reset the chip). This will - * restart auto-negotiation. If auto-negotiation is successful then the - * link-up status bit will be set and the flow control enable bits (RFCE - * and TFCE) will be set according to their negotiated value. + /* Since auto-negotiation is enabled, take the link out of reset (the + * link will be in reset, because we previously reset the chip). This + * will restart auto-negotiation. If auto-negotiation is successful + * then the link-up status bit will be set and the flow control enable + * bits (RFCE and TFCE) will be set according to their negotiated value. */ e_dbg("Auto-negotiation enabled\n"); @@ -927,11 +938,12 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) hw->txcw = txcw; msleep(1); - /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" - * indication in the Device Status Register. Time-out if a link isn't - * seen in 500 milliseconds seconds (Auto-negotiation should complete in - * less than 500 milliseconds even if the other end is doing it in SW). - * For internal serdes, we just assume a signal is present, then poll. + /* If we have a signal (the cable is plugged in) then poll for a + * "Link-Up" indication in the Device Status Register. Time-out if a + * link isn't seen in 500 milliseconds seconds (Auto-negotiation should + * complete in less than 500 milliseconds even if the other end is doing + * it in SW). For internal serdes, we just assume a signal is present, + * then poll. */ if (hw->media_type == e1000_media_type_internal_serdes || (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { @@ -946,9 +958,9 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) e_dbg("Never got a valid link from auto-neg!!!\n"); hw->autoneg_failed = 1; /* AutoNeg failed to achieve a link, so we'll call - * e1000_check_for_link. This routine will force the link up if - * we detect a signal. This will allow us to communicate with - * non-autonegotiating link partners. + * e1000_check_for_link. This routine will force the + * link up if we detect a signal. This will allow us to + * communicate with non-autonegotiating link partners. */ ret_val = e1000_check_for_link(hw); if (ret_val) { @@ -1042,9 +1054,9 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) e_dbg("e1000_copper_link_preconfig"); ctrl = er32(CTRL); - /* With 82543, we need to force speed and duplex on the MAC equal to what - * the PHY speed and duplex configuration is. In addition, we need to - * perform a hardware reset on the PHY to take it out of reset. + /* With 82543, we need to force speed and duplex on the MAC equal to + * what the PHY speed and duplex configuration is. In addition, we need + * to perform a hardware reset on the PHY to take it out of reset. */ if (hw->mac_type > e1000_82543) { ctrl |= E1000_CTRL_SLU; @@ -1175,7 +1187,8 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) /* when autonegotiation advertisement is only 1000Mbps then we * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ + * resolution as hardware default. + */ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { /* Disable SmartSpeed */ ret_val = @@ -1485,13 +1498,15 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw) if (hw->autoneg) { /* Setup autoneg and flow control advertisement - * and perform autonegotiation */ + * and perform autonegotiation + */ ret_val = e1000_copper_link_autoneg(hw); if (ret_val) return ret_val; } else { /* PHY will be set to 10H, 10F, 100H,or 100F - * depending on value from forced_speed_duplex. */ + * depending on value from forced_speed_duplex. + */ e_dbg("Forcing speed and duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); if (ret_val) { @@ -1609,7 +1624,8 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation. + * Advertisement Register (PHY_AUTONEG_ADV) and re-start + * auto-negotiation. * * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled @@ -1636,7 +1652,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * capable of RX Pause ONLY, we will advertise that we * support both symmetric and asymmetric RX PAUSE. Later * (in e1000_config_fc_after_link_up) we will disable the - *hw's ability to send PAUSE frames. + * hw's ability to send PAUSE frames. */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; @@ -1720,15 +1736,15 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Are we forcing Full or Half Duplex? */ if (hw->forced_speed_duplex == e1000_100_full || hw->forced_speed_duplex == e1000_10_full) { - /* We want to force full duplex so we SET the full duplex bits in the - * Device and MII Control Registers. + /* We want to force full duplex so we SET the full duplex bits + * in the Device and MII Control Registers. */ ctrl |= E1000_CTRL_FD; mii_ctrl_reg |= MII_CR_FULL_DUPLEX; e_dbg("Full Duplex\n"); } else { - /* We want to force half duplex so we CLEAR the full duplex bits in - * the Device and MII Control Registers. + /* We want to force half duplex so we CLEAR the full duplex bits + * in the Device and MII Control Registers. */ ctrl &= ~E1000_CTRL_FD; mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX; @@ -1762,8 +1778,8 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI - * forced whenever speed are duplex are forced. + /* Clear Auto-Crossover to force MDI manually. M88E1000 requires + * MDI forced whenever speed are duplex are forced. */ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; ret_val = @@ -1814,10 +1830,10 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) e_dbg("Waiting for forced speed/duplex link.\n"); mii_status_reg = 0; - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + /* Wait for autoneg to complete or 4.5 seconds to expire */ for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. + /* Read the MII Status Register and wait for Auto-Neg + * Complete bit to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); @@ -1834,20 +1850,24 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) msleep(100); } if ((i == 0) && (hw->phy_type == e1000_phy_m88)) { - /* We didn't get link. Reset the DSP and wait again for link. */ + /* We didn't get link. Reset the DSP and wait again + * for link. + */ ret_val = e1000_phy_reset_dsp(hw); if (ret_val) { e_dbg("Error Resetting PHY DSP\n"); return ret_val; } } - /* This loop will early-out if the link condition has been met. */ + /* This loop will early-out if the link condition has been + * met + */ for (i = PHY_FORCE_TIME; i > 0; i--) { if (mii_status_reg & MII_SR_LINK_STATUS) break; msleep(100); - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. + /* Read the MII Status Register and wait for Auto-Neg + * Complete bit to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); @@ -1862,9 +1882,10 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) } if (hw->phy_type == e1000_phy_m88) { - /* Because we reset the PHY above, we need to re-force TX_CLK in the - * Extended PHY Specific Control Register to 25MHz clock. This value - * defaults back to a 2.5MHz clock when the PHY is reset. + /* Because we reset the PHY above, we need to re-force TX_CLK in + * the Extended PHY Specific Control Register to 25MHz clock. + * This value defaults back to a 2.5MHz clock when the PHY is + * reset. */ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, @@ -1879,8 +1900,9 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) if (ret_val) return ret_val; - /* In addition, because of the s/w reset above, we need to enable CRS on - * TX. This must be set for both full and half duplex operation. + /* In addition, because of the s/w reset above, we need to + * enable CRS on Tx. This must be set for both full and half + * duplex operation. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -1951,7 +1973,8 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) e_dbg("e1000_config_mac_to_phy"); /* 82544 or newer MAC, Auto Speed Detection takes care of - * MAC speed/duplex configuration.*/ + * MAC speed/duplex configuration. + */ if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) return E1000_SUCCESS; @@ -1985,7 +2008,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) * registers depending on negotiated values. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); + &phy_data); if (ret_val) return ret_val; @@ -2002,7 +2025,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) ctrl |= E1000_CTRL_SPD_1000; else if ((phy_data & M88E1000_PSSR_SPEED) == - M88E1000_PSSR_100MBS) + M88E1000_PSSR_100MBS) ctrl |= E1000_CTRL_SPD_100; } @@ -2135,9 +2158,9 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { /* The AutoNeg process has completed, so we now need to * read both the Auto Negotiation Advertisement Register - * (Address 4) and the Auto_Negotiation Base Page Ability - * Register (Address 5) to determine how flow control was - * negotiated. + * (Address 4) and the Auto_Negotiation Base Page + * Ability Register (Address 5) to determine how flow + * control was negotiated. */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); @@ -2148,18 +2171,19 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Two bits in the Auto Negotiation Advertisement Register - * (Address 4) and two bits in the Auto Negotiation Base - * Page Ability Register (Address 5) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. + /* Two bits in the Auto Negotiation Advertisement + * Register (Address 4) and two bits in the Auto + * Negotiation Base Page Ability Register (Address 5) + * determine flow control for both the PHY and the link + * partner. The following table, taken out of the IEEE + * 802.3ab/D6.0 dated March 25, 1999, describes these + * PAUSE resolution bits and how flow control is + * determined based upon these settings. * NOTE: DC = Don't Care * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 0 | 0 | DC | DC | E1000_FC_NONE * 0 | 1 | 0 | DC | E1000_FC_NONE * 0 | 1 | 1 | 0 | E1000_FC_NONE @@ -2178,17 +2202,18 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 1 | DC | 1 | DC | E1000_FC_FULL * */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* Now we need to check if the user selected RX ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. + /* Now we need to check if the user selected Rx + * ONLY of pause frames. In this case, we had + * to advertise FULL flow control because we + * could not advertise Rx ONLY. Hence, we must + * now check to see if we need to turn OFF the + * TRANSMISSION of PAUSE frames. */ if (hw->original_fc == E1000_FC_FULL) { hw->fc = E1000_FC_FULL; @@ -2203,7 +2228,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE * */ @@ -2220,7 +2245,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ @@ -2233,25 +2258,27 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) e_dbg ("Flow Control = RX PAUSE frames only.\n"); } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. + /* Per the IEEE spec, at this point flow control should + * be disabled. However, we want to consider that we + * could be connected to a legacy switch that doesn't + * advertise desired flow control, but can be forced on + * the link partner. So if we advertised no flow + * control, that is what we will resolve to. If we + * advertised some kind of receive capability (Rx Pause + * Only or Full Flow Control) and the link partner + * advertised none, we will configure ourselves to + * enable Rx Flow Control only. We can do this safely + * for two reasons: If the link partner really + * didn't want flow control enabled, and we enable Rx, + * no harm done since we won't be receiving any PAUSE + * frames anyway. If the intent on the link partner was + * to have flow control enabled, then by us enabling Rx + * only, we can at least receive pause frames and + * process them. This is a good idea because in most + * cases, since we are predominantly a server NIC, more + * times than not we will be asked to delay transmission + * of packets than asking our link partner to pause + * transmission of frames. */ else if ((hw->original_fc == E1000_FC_NONE || hw->original_fc == E1000_FC_TX_PAUSE) || @@ -2316,8 +2343,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) status = er32(STATUS); rxcw = er32(RXCW); - /* - * If we don't have link (auto-negotiation failed or link partner + /* If we don't have link (auto-negotiation failed or link partner * cannot auto-negotiate), and our link partner is not trying to * auto-negotiate with us (we are receiving idles or data), * we need to force link up. We also need to give auto-negotiation @@ -2346,8 +2372,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) goto out; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* - * If we are forcing link and we are receiving /C/ ordered + /* If we are forcing link and we are receiving /C/ ordered * sets, re-enable auto-negotiation in the TXCW register * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. @@ -2358,8 +2383,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) hw->serdes_has_link = true; } else if (!(E1000_TXCW_ANE & er32(TXCW))) { - /* - * If we force link for non-auto-negotiation switch, check + /* If we force link for non-auto-negotiation switch, check * link status based on MAC synchronization for internal * serdes media type. */ @@ -2468,15 +2492,17 @@ s32 e1000_check_for_link(struct e1000_hw *hw) if (phy_data & MII_SR_LINK_STATUS) { hw->get_link_status = false; - /* Check if there was DownShift, must be checked immediately after - * link-up */ + /* Check if there was DownShift, must be checked + * immediately after link-up + */ e1000_check_downshift(hw); /* If we are on 82544 or 82543 silicon and speed/duplex - * are forced to 10H or 10F, then we will implement the polarity - * reversal workaround. We disable interrupts first, and upon - * returning, place the devices interrupt state to its previous - * value except for the link status change interrupt which will + * are forced to 10H or 10F, then we will implement the + * polarity reversal workaround. We disable interrupts + * first, and upon returning, place the devices + * interrupt state to its previous value except for the + * link status change interrupt which will * happen due to the execution of this workaround. */ @@ -2527,9 +2553,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw) } } - /* Configure Flow Control now that Auto-Neg has completed. First, we - * need to restore the desired flow control settings because we may - * have had to re-autoneg with a different link partner. + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control settings + * because we may have had to re-autoneg with a different link + * partner. */ ret_val = e1000_config_fc_after_link_up(hw); if (ret_val) { @@ -2538,11 +2565,12 @@ s32 e1000_check_for_link(struct e1000_hw *hw) } /* At this point we know that we are on copper and we have - * auto-negotiated link. These are conditions for checking the link - * partner capability register. We use the link speed to determine if - * TBI compatibility needs to be turned on or off. If the link is not - * at gigabit speed, then TBI compatibility is not needed. If we are - * at gigabit speed, we turn on TBI compatibility. + * auto-negotiated link. These are conditions for checking the + * link partner capability register. We use the link speed to + * determine if TBI compatibility needs to be turned on or off. + * If the link is not at gigabit speed, then TBI compatibility + * is not needed. If we are at gigabit speed, we turn on TBI + * compatibility. */ if (hw->tbi_compatibility_en) { u16 speed, duplex; @@ -2554,20 +2582,23 @@ s32 e1000_check_for_link(struct e1000_hw *hw) return ret_val; } if (speed != SPEED_1000) { - /* If link speed is not set to gigabit speed, we do not need - * to enable TBI compatibility. + /* If link speed is not set to gigabit speed, we + * do not need to enable TBI compatibility. */ if (hw->tbi_compatibility_on) { - /* If we previously were in the mode, turn it off. */ + /* If we previously were in the mode, + * turn it off. + */ rctl = er32(RCTL); rctl &= ~E1000_RCTL_SBP; ew32(RCTL, rctl); hw->tbi_compatibility_on = false; } } else { - /* If TBI compatibility is was previously off, turn it on. For - * compatibility with a TBI link partner, we will store bad - * packets. Some frames have an additional byte on the end and + /* If TBI compatibility is was previously off, + * turn it on. For compatibility with a TBI link + * partner, we will store bad packets. Some + * frames have an additional byte on the end and * will look like CRC errors to to the hardware. */ if (!hw->tbi_compatibility_on) { @@ -2629,9 +2660,9 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) *duplex = FULL_DUPLEX; } - /* IGP01 PHY may advertise full duplex operation after speed downgrade even - * if it is operating at half duplex. Here we set the duplex settings to - * match the duplex in the link partner's capabilities. + /* IGP01 PHY may advertise full duplex operation after speed downgrade + * even if it is operating at half duplex. Here we set the duplex + * settings to match the duplex in the link partner's capabilities. */ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); @@ -2697,8 +2728,8 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) */ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Raise the clock input to the Management Data Clock (by setting the MDC - * bit), and then delay 10 microseconds. + /* Raise the clock input to the Management Data Clock (by setting the + * MDC bit), and then delay 10 microseconds. */ ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); E1000_WRITE_FLUSH(); @@ -2712,8 +2743,8 @@ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) */ static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Lower the clock input to the Management Data Clock (by clearing the MDC - * bit), and then delay 10 microseconds. + /* Lower the clock input to the Management Data Clock (by clearing the + * MDC bit), and then delay 10 microseconds. */ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); E1000_WRITE_FLUSH(); @@ -2746,10 +2777,10 @@ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); while (mask) { - /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and - * then raising and lowering the Management Data Clock. A "0" is - * shifted out to the PHY by setting the MDIO bit to "0" and then - * raising and lowering the clock. + /* A "1" is shifted out to the PHY by setting the MDIO bit to + * "1" and then raising and lowering the Management Data Clock. + * A "0" is shifted out to the PHY by setting the MDIO bit to + * "0" and then raising and lowering the clock. */ if (data & mask) ctrl |= E1000_CTRL_MDIO; @@ -2781,24 +2812,26 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) u8 i; /* In order to read a register from the PHY, we need to shift in a total - * of 18 bits from the PHY. The first two bit (turnaround) times are used - * to avoid contention on the MDIO pin when a read operation is performed. - * These two bits are ignored by us and thrown away. Bits are "shifted in" - * by raising the input to the Management Data Clock (setting the MDC bit), - * and then reading the value of the MDIO bit. + * of 18 bits from the PHY. The first two bit (turnaround) times are + * used to avoid contention on the MDIO pin when a read operation is + * performed. These two bits are ignored by us and thrown away. Bits are + * "shifted in" by raising the input to the Management Data Clock + * (setting the MDC bit), and then reading the value of the MDIO bit. */ ctrl = er32(CTRL); - /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ + /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as + * input. + */ ctrl &= ~E1000_CTRL_MDIO_DIR; ctrl &= ~E1000_CTRL_MDIO; ew32(CTRL, ctrl); E1000_WRITE_FLUSH(); - /* Raise and Lower the clock before reading in the data. This accounts for - * the turnaround bits. The first clock occurred when we clocked out the - * last bit of the Register Address. + /* Raise and Lower the clock before reading in the data. This accounts + * for the turnaround bits. The first clock occurred when we clocked out + * the last bit of the Register Address. */ e1000_raise_mdi_clk(hw, &ctrl); e1000_lower_mdi_clk(hw, &ctrl); @@ -2870,8 +2903,8 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, if (hw->mac_type > e1000_82543) { /* Set up Op-code, Phy Address, and register address in the MDI - * Control register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. + * Control register. The MAC will take care of interfacing with + * the PHY to retrieve the desired data. */ if (hw->mac_type == e1000_ce4100) { mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | @@ -2929,31 +2962,32 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, *phy_data = (u16) mdic; } } else { - /* We must first send a preamble through the MDIO pin to signal the - * beginning of an MII instruction. This is done by sending 32 - * consecutive "1" bits. + /* We must first send a preamble through the MDIO pin to signal + * the beginning of an MII instruction. This is done by sending + * 32 consecutive "1" bits. */ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); /* Now combine the next few fields that are required for a read * operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine five different times. The format of - * a MII read instruction consists of a shift out of 14 bits and is - * defined as follows: + * e1000_shift_out_mdi_bits routine five different times. The + * format of a MII read instruction consists of a shift out of + * 14 bits and is defined as follows: * - * followed by a shift in of 18 bits. This first two bits shifted in - * are TurnAround bits used to avoid contention on the MDIO pin when a - * READ operation is performed. These two bits are thrown away - * followed by a shift in of 16 bits which contains the desired data. + * followed by a shift in of 18 bits. This first two bits + * shifted in are TurnAround bits used to avoid contention on + * the MDIO pin when a READ operation is performed. These two + * bits are thrown away followed by a shift in of 16 bits which + * contains the desired data. */ mdic = ((reg_addr) | (phy_addr << 5) | (PHY_OP_READ << 10) | (PHY_SOF << 12)); e1000_shift_out_mdi_bits(hw, mdic, 14); - /* Now that we've shifted out the read command to the MII, we need to - * "shift in" the 16-bit value (18 total bits) of the requested PHY - * register address. + /* Now that we've shifted out the read command to the MII, we + * need to "shift in" the 16-bit value (18 total bits) of the + * requested PHY register address. */ *phy_data = e1000_shift_in_mdi_bits(hw); } @@ -3060,18 +3094,18 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, } } } else { - /* We'll need to use the SW defined pins to shift the write command - * out to the PHY. We first send a preamble to the PHY to signal the - * beginning of the MII instruction. This is done by sending 32 - * consecutive "1" bits. + /* We'll need to use the SW defined pins to shift the write + * command out to the PHY. We first send a preamble to the PHY + * to signal the beginning of the MII instruction. This is done + * by sending 32 consecutive "1" bits. */ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); - /* Now combine the remaining required fields that will indicate a - * write operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine for each field in the command. The - * format of a MII write instruction is as follows: - * . + /* Now combine the remaining required fields that will indicate + * a write operation. We use this method instead of calling the + * e1000_shift_out_mdi_bits routine for each field in the + * command. The format of a MII write instruction is as follows: + * . */ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); @@ -3100,10 +3134,10 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw) e_dbg("Resetting Phy...\n"); if (hw->mac_type > e1000_82543) { - /* Read the device control register and assert the E1000_CTRL_PHY_RST - * bit. Then, take it out of reset. + /* Read the device control register and assert the + * E1000_CTRL_PHY_RST bit. Then, take it out of reset. * For e1000 hardware, we delay for 10ms between the assert - * and deassert. + * and de-assert. */ ctrl = er32(CTRL); ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); @@ -3115,8 +3149,9 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw) E1000_WRITE_FLUSH(); } else { - /* Read the Extended Device Control Register, assert the PHY_RESET_DIR - * bit to put the PHY into reset. Then, take it out of reset. + /* Read the Extended Device Control Register, assert the + * PHY_RESET_DIR bit to put the PHY into reset. Then, take it + * out of reset. */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; @@ -3301,7 +3336,8 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, e_dbg("e1000_phy_igp_get_info"); /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ + * and it stored in the hw->speed_downgraded parameter. + */ phy_info->downshift = (e1000_downshift) hw->speed_downgraded; /* IGP01E1000 does not need to support it. */ @@ -3327,7 +3363,9 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - /* Local/Remote Receiver Information are only valid at 1000 Mbps */ + /* Local/Remote Receiver Information are only valid @ 1000 + * Mbps + */ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); if (ret_val) return ret_val; @@ -3379,7 +3417,8 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, e_dbg("e1000_phy_m88_get_info"); /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ + * and it stored in the hw->speed_downgraded parameter. + */ phy_info->downshift = (e1000_downshift) hw->speed_downgraded; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -3574,8 +3613,8 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw) } if (eeprom->type == e1000_eeprom_spi) { - /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to - * 32KB (incremented by powers of 2). + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes + * 128B to 32KB (incremented by powers of 2). */ /* Set to default value for initial eeprom read. */ eeprom->word_size = 64; @@ -3585,8 +3624,9 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw) eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; /* 256B eeprom size was not supported in earlier hardware, so we - * bump eeprom_size up one to ensure that "1" (which maps to 256B) - * is never the result used in the shifting logic below. */ + * bump eeprom_size up one to ensure that "1" (which maps to + * 256B) is never the result used in the shifting logic below. + */ if (eeprom_size) eeprom_size++; @@ -3618,8 +3658,8 @@ static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd) */ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd) { - /* Lower the clock input to the EEPROM (by clearing the SK bit), and then - * wait 50 microseconds. + /* Lower the clock input to the EEPROM (by clearing the SK bit), and + * then wait 50 microseconds. */ *eecd = *eecd & ~E1000_EECD_SK; ew32(EECD, *eecd); @@ -3651,10 +3691,11 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count) eecd |= E1000_EECD_DO; } do { - /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", - * and then raising and then lowering the clock (the SK bit controls - * the clock input to the EEPROM). A "0" is shifted out to the EEPROM - * by setting "DI" to "0" and then raising and then lowering the clock. + /* A "1" is shifted out to the EEPROM by setting bit "DI" to a + * "1", and then raising and then lowering the clock (the SK bit + * controls the clock input to the EEPROM). A "0" is shifted + * out to the EEPROM by setting "DI" to "0" and then raising and + * then lowering the clock. */ eecd &= ~E1000_EECD_DI; @@ -3691,9 +3732,9 @@ static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count) /* In order to read a register from the EEPROM, we need to shift 'count' * bits in from the EEPROM. Bits are "shifted in" by raising the clock - * input to the EEPROM (setting the SK bit), and then reading the value of - * the "DO" bit. During this "shifting in" process the "DI" bit should - * always be clear. + * input to the EEPROM (setting the SK bit), and then reading the value + * of the "DO" bit. During this "shifting in" process the "DI" bit + * should always be clear. */ eecd = er32(EECD); @@ -3945,8 +3986,8 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, if (eeprom->word_size == 0) e1000_init_eeprom_params(hw); - /* A check for invalid values: offset too large, too many words, and not - * enough words. + /* A check for invalid values: offset too large, too many words, and + * not enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { @@ -3964,7 +4005,8 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_EEPROM; /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have - * acquired the EEPROM at this point, so any returns should release it */ + * acquired the EEPROM at this point, so any returns should release it + */ if (eeprom->type == e1000_eeprom_spi) { u16 word_in; u8 read_opcode = EEPROM_READ_OPCODE_SPI; @@ -3976,7 +4018,9 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_standby_eeprom(hw); - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ if ((eeprom->address_bits == 8) && (offset >= 128)) read_opcode |= EEPROM_A8_OPCODE_SPI; @@ -3985,11 +4029,13 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_shift_out_ee_bits(hw, (u16) (offset * 2), eeprom->address_bits); - /* Read the data. The address of the eeprom internally increments with - * each byte (spi) being read, saving on the overhead of eeprom setup - * and tear-down. The address counter will roll over if reading beyond - * the size of the eeprom, thus allowing the entire memory to be read - * starting from any offset. */ + /* Read the data. The address of the eeprom internally + * increments with each byte (spi) being read, saving on the + * overhead of eeprom setup and tear-down. The address counter + * will roll over if reading beyond the size of the eeprom, thus + * allowing the entire memory to be read starting from any + * offset. + */ for (i = 0; i < words; i++) { word_in = e1000_shift_in_ee_bits(hw, 16); data[i] = (word_in >> 8) | (word_in << 8); @@ -4003,8 +4049,9 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_shift_out_ee_bits(hw, (u16) (offset + i), eeprom->address_bits); - /* Read the data. For microwire, each word requires the overhead - * of eeprom setup and tear-down. */ + /* Read the data. For microwire, each word requires the + * overhead of eeprom setup and tear-down. + */ data[i] = e1000_shift_in_ee_bits(hw, 16); e1000_standby_eeprom(hw); } @@ -4119,8 +4166,8 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, if (eeprom->word_size == 0) e1000_init_eeprom_params(hw); - /* A check for invalid values: offset too large, too many words, and not - * enough words. + /* A check for invalid values: offset too large, too many words, and + * not enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { @@ -4174,7 +4221,9 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, e1000_standby_eeprom(hw); - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ if ((eeprom->address_bits == 8) && (offset >= 128)) write_opcode |= EEPROM_A8_OPCODE_SPI; @@ -4186,16 +4235,19 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, /* Send the data */ - /* Loop to allow for up to whole page write (32 bytes) of eeprom */ + /* Loop to allow for up to whole page write (32 bytes) of + * eeprom + */ while (widx < words) { u16 word_out = data[widx]; word_out = (word_out >> 8) | (word_out << 8); e1000_shift_out_ee_bits(hw, word_out, 16); widx++; - /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE - * operation, while the smaller eeproms are capable of an 8-byte - * PAGE WRITE operation. Break the inner loop to pass new address + /* Some larger eeprom sizes are capable of a 32-byte + * PAGE WRITE operation, while the smaller eeproms are + * capable of an 8-byte PAGE WRITE operation. Break the + * inner loop to pass new address */ if ((((offset + widx) * 2) % eeprom->page_size) == 0) { e1000_standby_eeprom(hw); @@ -4249,14 +4301,15 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, /* Send the data */ e1000_shift_out_ee_bits(hw, data[words_written], 16); - /* Toggle the CS line. This in effect tells the EEPROM to execute - * the previous command. + /* Toggle the CS line. This in effect tells the EEPROM to + * execute the previous command. */ e1000_standby_eeprom(hw); - /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will - * signal that the command has been completed by raising the DO signal. - * If DO does not go high in 10 milliseconds, then error out. + /* Read DO repeatedly until it is high (equal to '1'). The + * EEPROM will signal that the command has been completed by + * raising the DO signal. If DO does not go high in 10 + * milliseconds, then error out. */ for (i = 0; i < 200; i++) { eecd = er32(EECD); @@ -4483,7 +4536,8 @@ static void e1000_clear_vfta(struct e1000_hw *hw) for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { /* If the offset we want to clear is the same offset of the * manageability VLAN ID, then clear all bits except that of the - * manageability unit */ + * manageability unit + */ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); E1000_WRITE_FLUSH(); @@ -4911,12 +4965,12 @@ void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, * counters overcount this packet as a CRC error and undercount * the packet as a good packet */ - /* This packet should not be counted as a CRC error. */ + /* This packet should not be counted as a CRC error. */ stats->crcerrs--; - /* This packet does count as a Good Packet Received. */ + /* This packet does count as a Good Packet Received. */ stats->gprc++; - /* Adjust the Good Octets received counters */ + /* Adjust the Good Octets received counters */ carry_bit = 0x80000000 & stats->gorcl; stats->gorcl += frame_len; /* If the high bit of Gorcl (the low 32 bits of the Good Octets @@ -5196,8 +5250,9 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, if (ret_val) return ret_val; - /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to - * find the polarity status */ + /* If speed is 1000 Mbps, must read the + * IGP01E1000_PHY_PCS_INIT_REG to find the polarity status + */ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { @@ -5213,8 +5268,9 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } else { - /* For 10 Mbps, read the polarity bit in the status register. (for - * 100 Mbps this bit is always 0) */ + /* For 10 Mbps, read the polarity bit in the status + * register. (for 100 Mbps this bit is always 0) + */ *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? e1000_rev_polarity_reversed : @@ -5374,8 +5430,9 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } } else { if (hw->dsp_config_state == e1000_dsp_config_activated) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ + /* Save off the current value of register 0x2F5B to be + * restored at the end of the routines. + */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); @@ -5391,7 +5448,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) msleep(20); ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); + IGP01E1000_IEEE_FORCE_GIGA); if (ret_val) return ret_val; for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { @@ -5412,7 +5469,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) return ret_val; @@ -5429,8 +5486,9 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } if (hw->ffe_config_state == e1000_ffe_config_active) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ + /* Save off the current value of register 0x2F5B to be + * restored at the end of the routines. + */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); @@ -5446,7 +5504,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) msleep(20); ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); + IGP01E1000_IEEE_FORCE_GIGA); if (ret_val) return ret_val; ret_val = @@ -5456,7 +5514,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) return ret_val; ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) return ret_val; @@ -5542,8 +5600,9 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) return E1000_SUCCESS; /* During driver activity LPLU should not be used or it will attain link - * from the lowest speeds starting from 10Mbps. The capability is used for - * Dx transitions and states */ + * from the lowest speeds starting from 10Mbps. The capability is used + * for Dx transitions and states + */ if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { ret_val = @@ -5563,10 +5622,11 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) return ret_val; } - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during - * Dx states where the power conservation is most important. During - * driver activity we should enable SmartSpeed, so performance is - * maintained. */ + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ if (hw->smart_speed == e1000_smart_speed_on) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index d947e3a..8502c62 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -239,7 +239,6 @@ struct net_device *e1000_get_hw_dev(struct e1000_hw *hw) * e1000_init_module is the first routine called when the driver is * loaded. All it does is register with the PCI subsystem. **/ - static int __init e1000_init_module(void) { int ret; @@ -266,7 +265,6 @@ module_init(e1000_init_module); * e1000_exit_module is called just before the driver is removed * from memory. **/ - static void __exit e1000_exit_module(void) { pci_unregister_driver(&e1000_driver); @@ -301,7 +299,6 @@ static void e1000_free_irq(struct e1000_adapter *adapter) * e1000_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure **/ - static void e1000_irq_disable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -315,7 +312,6 @@ static void e1000_irq_disable(struct e1000_adapter *adapter) * e1000_irq_enable - Enable default interrupt generation settings * @adapter: board private structure **/ - static void e1000_irq_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -398,11 +394,12 @@ static void e1000_configure(struct e1000_adapter *adapter) e1000_configure_rx(adapter); /* call E1000_DESC_UNUSED which always leaves * at least 1 descriptor unused to make sure - * next_to_use != next_to_clean */ + * next_to_use != next_to_clean + */ for (i = 0; i < adapter->num_rx_queues; i++) { struct e1000_rx_ring *ring = &adapter->rx_ring[i]; adapter->alloc_rx_buf(adapter, ring, - E1000_DESC_UNUSED(ring)); + E1000_DESC_UNUSED(ring)); } } @@ -433,9 +430,7 @@ int e1000_up(struct e1000_adapter *adapter) * The phy may be powered down to save power and turn off link when the * driver is unloaded and wake on lan is not enabled (among others) * *** this routine MUST be followed by a call to e1000_reset *** - * **/ - void e1000_power_up_phy(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -444,7 +439,8 @@ void e1000_power_up_phy(struct e1000_adapter *adapter) /* Just clear the power down bit to wake the phy back up */ if (hw->media_type == e1000_media_type_copper) { /* according to the manual, the phy will retain its - * settings across a power-down/up cycle */ + * settings across a power-down/up cycle + */ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg); mii_reg &= ~MII_CR_POWER_DOWN; e1000_write_phy_reg(hw, PHY_CTRL, mii_reg); @@ -459,7 +455,8 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) * The PHY cannot be powered down if any of the following is true * * (a) WoL is enabled * (b) AMT is active - * (c) SoL/IDER session is active */ + * (c) SoL/IDER session is active + */ if (!adapter->wol && hw->mac_type >= e1000_82540 && hw->media_type == e1000_media_type_copper) { u16 mii_reg = 0; @@ -529,8 +526,7 @@ void e1000_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); - /* - * Setting DOWN must be after irq_disable to prevent + /* Setting DOWN must be after irq_disable to prevent * a screaming interrupt. Setting DOWN also prevents * tasks from rescheduling. */ @@ -627,14 +623,14 @@ void e1000_reset(struct e1000_adapter *adapter) * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least * one full receive packet and is similarly rounded up and - * expressed in KB. */ + * expressed in KB. + */ pba = er32(PBA); /* upper 16 bits has Tx packet buffer allocation size in KB */ tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; - /* - * the tx fifo also stores 16 bytes of information about the tx + /* the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (hw->max_frame_size + @@ -649,7 +645,8 @@ void e1000_reset(struct e1000_adapter *adapter) /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ + * allocation, take space away from current Rx allocation + */ if (tx_space < min_tx_space && ((min_tx_space - tx_space) < pba)) { pba = pba - (min_tx_space - tx_space); @@ -663,8 +660,9 @@ void e1000_reset(struct e1000_adapter *adapter) break; } - /* if short on rx space, rx wins and must trump tx - * adjustment or use Early Receive if available */ + /* if short on Rx space, Rx wins and must trump Tx + * adjustment or use Early Receive if available + */ if (pba < min_rx_space) pba = min_rx_space; } @@ -672,8 +670,7 @@ void e1000_reset(struct e1000_adapter *adapter) ew32(PBA, pba); - /* - * flow control settings: + /* flow control settings: * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: @@ -707,7 +704,8 @@ void e1000_reset(struct e1000_adapter *adapter) u32 ctrl = er32(CTRL); /* clear phy power management bit if we are in gig only mode, * which if enabled will attempt negotiation to 100Mb, which - * can cause a loss of link at power off or driver unload */ + * can cause a loss of link at power off or driver unload + */ ctrl &= ~E1000_CTRL_SWDPIN3; ew32(CTRL, ctrl); } @@ -808,9 +806,8 @@ static int e1000_is_need_ioport(struct pci_dev *pdev) static netdev_features_t e1000_fix_features(struct net_device *netdev, netdev_features_t features) { - /* - * Since there is no support for separate rx/tx vlan accel - * enable/disable make sure tx flag is always in same state as rx. + /* Since there is no support for separate Rx/Tx vlan accel + * enable/disable make sure Tx flag is always in same state as Rx. */ if (features & NETIF_F_HW_VLAN_RX) features |= NETIF_F_HW_VLAN_TX; @@ -1012,16 +1009,14 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto err_sw_init; - /* - * there is a workaround being applied below that limits + /* there is a workaround being applied below that limits * 64-bit DMA addresses to 64-bit hardware. There are some * 32-bit adapters that Tx hang when given 64-bit DMA addresses */ pci_using_dac = 0; if ((hw->bus_type == e1000_bus_type_pcix) && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { - /* - * according to DMA-API-HOWTO, coherent calls will always + /* according to DMA-API-HOWTO, coherent calls will always * succeed if the set call did */ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); @@ -1099,7 +1094,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* before reading the EEPROM, reset the controller to - * put the device in a known good starting state */ + * put the device in a known good starting state + */ e1000_reset_hw(hw); @@ -1107,8 +1103,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (e1000_validate_eeprom_checksum(hw) < 0) { e_err(probe, "The EEPROM Checksum Is Not Valid\n"); e1000_dump_eeprom(adapter); - /* - * set MAC address to all zeroes to invalidate and temporary + /* set MAC address to all zeroes to invalidate and temporary * disable this device for the user. This blocks regular * traffic while still permitting ethtool ioctls from reaching * the hardware as well as allowing the user to run the @@ -1169,7 +1164,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* now that we have the eeprom settings, apply the special cases * where the eeprom may be wrong or the board simply won't support - * wake on lan on a particular port */ + * wake on lan on a particular port + */ switch (pdev->device) { case E1000_DEV_ID_82546GB_PCIE: adapter->eeprom_wol = 0; @@ -1177,7 +1173,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ + * regardless of eeprom setting + */ if (er32(STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; @@ -1270,7 +1267,6 @@ err_pci_reg: * Hot-Plug event, or because the driver is going to be removed from * memory. **/ - static void e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -1306,7 +1302,6 @@ static void e1000_remove(struct pci_dev *pdev) * e1000_sw_init initializes the Adapter private data structure. * e1000_init_hw_struct MUST be called before this function **/ - static int e1000_sw_init(struct e1000_adapter *adapter) { adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; @@ -1337,7 +1332,6 @@ static int e1000_sw_init(struct e1000_adapter *adapter) * We allocate one ring per queue at run-time since we don't know the * number of queues at compile-time. **/ - static int e1000_alloc_queues(struct e1000_adapter *adapter) { adapter->tx_ring = kcalloc(adapter->num_tx_queues, @@ -1367,7 +1361,6 @@ static int e1000_alloc_queues(struct e1000_adapter *adapter) * handler is registered with the OS, the watchdog task is started, * and the stack is notified that the interface is ready. **/ - static int e1000_open(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1401,7 +1394,8 @@ static int e1000_open(struct net_device *netdev) /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ + * clean_rx handler before we do so. + */ e1000_configure(adapter); err = e1000_request_irq(adapter); @@ -1444,7 +1438,6 @@ err_setup_tx: * needs to be disabled. A global MAC reset is issued to stop the * hardware, and all transmit and receive resources are freed. **/ - static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1459,10 +1452,11 @@ static int e1000_close(struct net_device *netdev) e1000_free_all_rx_resources(adapter); /* kill manageability vlan ID if supported, but not if a vlan with - * the same ID is registered on the host OS (let 8021q kill it) */ + * the same ID is registered on the host OS (let 8021q kill it) + */ if ((hw->mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && - !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) { + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) { e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); } @@ -1483,7 +1477,8 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, unsigned long end = begin + len; /* First rev 82545 and 82546 need to not allow any memory - * write location to cross 64k boundary due to errata 23 */ + * write location to cross 64k boundary due to errata 23 + */ if (hw->mac_type == e1000_82545 || hw->mac_type == e1000_ce4100 || hw->mac_type == e1000_82546) { @@ -1500,7 +1495,6 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, * * Return 0 on success, negative on failure **/ - static int e1000_setup_tx_resources(struct e1000_adapter *adapter, struct e1000_tx_ring *txdr) { @@ -1574,7 +1568,6 @@ setup_tx_desc_die: * * Return 0 on success, negative on failure **/ - int e1000_setup_all_tx_resources(struct e1000_adapter *adapter) { int i, err = 0; @@ -1599,7 +1592,6 @@ int e1000_setup_all_tx_resources(struct e1000_adapter *adapter) * * Configure the Tx unit of the MAC after a reset. **/ - static void e1000_configure_tx(struct e1000_adapter *adapter) { u64 tdba; @@ -1620,8 +1612,10 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ew32(TDBAL, (tdba & 0x00000000ffffffffULL)); ew32(TDT, 0); ew32(TDH, 0); - adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH); - adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT); + adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? + E1000_TDH : E1000_82542_TDH); + adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? + E1000_TDT : E1000_82542_TDT); break; } @@ -1676,7 +1670,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) adapter->txd_cmd |= E1000_TXD_CMD_RS; /* Cache if we're 82544 running in PCI-X because we'll - * need this to apply a workaround later in the send path. */ + * need this to apply a workaround later in the send path. + */ if (hw->mac_type == e1000_82544 && hw->bus_type == e1000_bus_type_pcix) adapter->pcix_82544 = true; @@ -1692,7 +1687,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) * * Returns 0 on success, negative on failure **/ - static int e1000_setup_rx_resources(struct e1000_adapter *adapter, struct e1000_rx_ring *rxdr) { @@ -1771,7 +1765,6 @@ setup_rx_desc_die: * * Return 0 on success, negative on failure **/ - int e1000_setup_all_rx_resources(struct e1000_adapter *adapter) { int i, err = 0; @@ -1840,7 +1833,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* This is useful for sniffing bad packets. */ if (adapter->netdev->features & NETIF_F_RXALL) { /* UPE and MPE will be handled by normal PROMISC logic - * in e1000e_set_rx_mode */ + * in e1000e_set_rx_mode + */ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ E1000_RCTL_BAM | /* RX All Bcast Pkts */ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ @@ -1862,7 +1856,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) * * Configure the Rx unit of the MAC after a reset. **/ - static void e1000_configure_rx(struct e1000_adapter *adapter) { u64 rdba; @@ -1895,7 +1888,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) } /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ + * the Base and Length of the Rx Descriptor Ring + */ switch (adapter->num_rx_queues) { case 1: default: @@ -1905,8 +1899,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(RDBAL, (rdba & 0x00000000ffffffffULL)); ew32(RDT, 0); ew32(RDH, 0); - adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH); - adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT); + adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? + E1000_RDH : E1000_82542_RDH); + adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? + E1000_RDT : E1000_82542_RDT); break; } @@ -1932,7 +1928,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * * Free all transmit software resources **/ - static void e1000_free_tx_resources(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring) { @@ -1955,7 +1950,6 @@ static void e1000_free_tx_resources(struct e1000_adapter *adapter, * * Free all transmit software resources **/ - void e1000_free_all_tx_resources(struct e1000_adapter *adapter) { int i; @@ -1990,7 +1984,6 @@ static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, * @adapter: board private structure * @tx_ring: ring to be cleaned **/ - static void e1000_clean_tx_ring(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring) { @@ -2026,7 +2019,6 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter, * e1000_clean_all_tx_rings - Free Tx Buffers for all queues * @adapter: board private structure **/ - static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter) { int i; @@ -2042,7 +2034,6 @@ static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter) * * Free all receive software resources **/ - static void e1000_free_rx_resources(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring) { @@ -2065,7 +2056,6 @@ static void e1000_free_rx_resources(struct e1000_adapter *adapter, * * Free all receive software resources **/ - void e1000_free_all_rx_resources(struct e1000_adapter *adapter) { int i; @@ -2079,7 +2069,6 @@ void e1000_free_all_rx_resources(struct e1000_adapter *adapter) * @adapter: board private structure * @rx_ring: ring to free buffers from **/ - static void e1000_clean_rx_ring(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring) { @@ -2138,7 +2127,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter, * e1000_clean_all_rx_rings - Free Rx Buffers for all queues * @adapter: board private structure **/ - static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter) { int i; @@ -2198,7 +2186,6 @@ static void e1000_leave_82542_rst(struct e1000_adapter *adapter) * * Returns 0 on success, negative on failure **/ - static int e1000_set_mac(struct net_device *netdev, void *p) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -2233,7 +2220,6 @@ static int e1000_set_mac(struct net_device *netdev, void *p) * responsible for configuring the hardware for proper unicast, multicast, * promiscuous mode, and all-multi behavior. **/ - static void e1000_set_rx_mode(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -2317,10 +2303,10 @@ static void e1000_set_rx_mode(struct net_device *netdev) } /* write the hash table completely, write from bottom to avoid - * both stupid write combining chipsets, and flushing each write */ + * both stupid write combining chipsets, and flushing each write + */ for (i = mta_reg_count - 1; i >= 0 ; i--) { - /* - * If we are on an 82544 has an errata where writing odd + /* If we are on an 82544 has an errata where writing odd * offsets overwrites the previous even offset, but writing * backwards over the range solves the issue by always * writing the odd offset first @@ -2458,8 +2444,8 @@ static void e1000_watchdog(struct work_struct *work) bool txb2b = true; /* update snapshot of PHY registers on LSC */ e1000_get_speed_and_duplex(hw, - &adapter->link_speed, - &adapter->link_duplex); + &adapter->link_speed, + &adapter->link_duplex); ctrl = er32(CTRL); pr_info("%s NIC Link is Up %d Mbps %s, " @@ -2533,7 +2519,8 @@ link_up: /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ + * (Do the reset outside of interrupt context). + */ adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); /* exit immediately since reset is imminent */ @@ -2543,8 +2530,7 @@ link_up: /* Simple mode for Interrupt Throttle Rate (ITR) */ if (hw->mac_type >= e1000_82540 && adapter->itr_setting == 4) { - /* - * Symmetric Tx/Rx gets a reduced ITR=2000; + /* Symmetric Tx/Rx gets a reduced ITR=2000; * Total asymmetrical Tx or Rx gets ITR=8000; * everyone else is between 2000-8000. */ @@ -2659,18 +2645,16 @@ static void e1000_set_itr(struct e1000_adapter *adapter) goto set_itr_now; } - adapter->tx_itr = e1000_update_itr(adapter, - adapter->tx_itr, - adapter->total_tx_packets, - adapter->total_tx_bytes); + adapter->tx_itr = e1000_update_itr(adapter, adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) adapter->tx_itr = low_latency; - adapter->rx_itr = e1000_update_itr(adapter, - adapter->rx_itr, - adapter->total_rx_packets, - adapter->total_rx_bytes); + adapter->rx_itr = e1000_update_itr(adapter, adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) adapter->rx_itr = low_latency; @@ -2696,10 +2680,11 @@ set_itr_now: if (new_itr != adapter->itr) { /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is - * increasing */ + * increasing + */ new_itr = new_itr > adapter->itr ? - min(adapter->itr + (new_itr >> 2), new_itr) : - new_itr; + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; adapter->itr = new_itr; ew32(ITR, 1000000000 / (new_itr * 256)); } @@ -2861,7 +2846,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, /* Workaround for Controller erratum -- * descriptor for non-tso packet in a linear SKB that follows a * tso gets written back prematurely before the data is fully - * DMA'd to the controller */ + * DMA'd to the controller + */ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb)) { tx_ring->last_tx_tso = false; @@ -2869,7 +2855,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, } /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ + * in TSO mode. Append 4-byte sentinel desc + */ if (unlikely(mss && !nr_frags && size == len && size > 8)) size -= 4; /* work-around for errata 10 and it applies @@ -2882,7 +2869,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, size = 2015; /* Workaround for potential 82544 hang in PCI-X. Avoid - * terminating buffers within evenly-aligned dwords. */ + * terminating buffers within evenly-aligned dwords. + */ if (unlikely(adapter->pcix_82544 && !((unsigned long)(skb->data + offset + size - 1) & 4) && size > 4)) @@ -2894,7 +2882,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->mapped_as_page = false; buffer_info->dma = dma_map_single(&pdev->dev, skb->data + offset, - size, DMA_TO_DEVICE); + size, DMA_TO_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; buffer_info->next_to_watch = i; @@ -2925,12 +2913,15 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8)) + * in TSO mode. Append 4-byte sentinel desc + */ + if (unlikely(mss && f == (nr_frags-1) && + size == len && size > 8)) size -= 4; /* Workaround for potential 82544 hang in PCI-X. * Avoid terminating buffers within evenly-aligned - * dwords. */ + * dwords. + */ bufend = (unsigned long) page_to_phys(skb_frag_page(frag)); bufend += offset + size - 1; @@ -2994,7 +2985,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, if (likely(tx_flags & E1000_TX_FLAGS_TSO)) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | - E1000_TXD_CMD_TSE; + E1000_TXD_CMD_TSE; txd_upper |= E1000_TXD_POPTS_TXSM << 8; if (likely(tx_flags & E1000_TX_FLAGS_IPV4)) @@ -3035,13 +3026,15 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); tx_ring->next_to_use = i; writel(i, hw->hw_addr + tx_ring->tdt); /* we need this if more than one processor can write to our tail - * at a time, it syncronizes IO on IA64/Altix systems */ + * at a time, it synchronizes IO on IA64/Altix systems + */ mmiowb(); } @@ -3090,11 +3083,13 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) netif_stop_queue(netdev); /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ + * but since that doesn't exist yet, just open code it. + */ smp_mb(); /* We need to check again in a case another CPU has just - * made room available. */ + * made room available. + */ if (likely(E1000_DESC_UNUSED(tx_ring) < size)) return -EBUSY; @@ -3105,7 +3100,7 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) } static int e1000_maybe_stop_tx(struct net_device *netdev, - struct e1000_tx_ring *tx_ring, int size) + struct e1000_tx_ring *tx_ring, int size) { if (likely(E1000_DESC_UNUSED(tx_ring) >= size)) return 0; @@ -3129,10 +3124,11 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, int tso; unsigned int f; - /* This goes back to the question of how to logically map a tx queue + /* This goes back to the question of how to logically map a Tx queue * to a flow. Right now, performance is impacted slightly negatively - * if using multiple tx queues. If the stack breaks away from a - * single qdisc implementation, we can look at this again. */ + * if using multiple Tx queues. If the stack breaks away from a + * single qdisc implementation, we can look at this again. + */ tx_ring = adapter->tx_ring; if (unlikely(skb->len <= 0)) { @@ -3157,7 +3153,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't * overrun the FIFO, adjust the max buffer len if mss - * drops. */ + * drops. + */ if (mss) { u8 hdr_len; max_per_txd = min(mss << 2, max_per_txd); @@ -3173,8 +3170,10 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, * this hardware's requirements * NOTE: this is a TSO only workaround * if end byte alignment not correct move us - * into the next dword */ - if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4) + * into the next dword + */ + if ((unsigned long)(skb_tail_pointer(skb) - 1) + & 4) break; /* fall through */ pull_size = min((unsigned int)4, skb->data_len); @@ -3222,7 +3221,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count += nr_frags; /* need: count + 2 desc gap to keep tail from touching - * head, otherwise try next time */ + * head, otherwise try next time + */ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) return NETDEV_TX_BUSY; @@ -3261,7 +3261,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, tx_flags |= E1000_TX_FLAGS_NO_FCS; count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd, - nr_frags, mss); + nr_frags, mss); if (count) { netdev_sent_queue(netdev, skb->len); @@ -3363,9 +3363,7 @@ static void e1000_dump(struct e1000_adapter *adapter) /* Print Registers */ e1000_regdump(adapter); - /* - * transmit dump - */ + /* transmit dump */ pr_info("TX Desc ring0 dump\n"); /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) @@ -3426,9 +3424,7 @@ static void e1000_dump(struct e1000_adapter *adapter) } rx_ring_summary: - /* - * receive dump - */ + /* receive dump */ pr_info("\nRX Desc ring dump\n"); /* Legacy Receive Descriptor Format @@ -3493,7 +3489,6 @@ exit: * e1000_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure **/ - static void e1000_tx_timeout(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3521,7 +3516,6 @@ static void e1000_reset_task(struct work_struct *work) * Returns the address of the device statistics structure. * The statistics are actually updated from the watchdog. **/ - static struct net_device_stats *e1000_get_stats(struct net_device *netdev) { /* only return the current stats */ @@ -3535,7 +3529,6 @@ static struct net_device_stats *e1000_get_stats(struct net_device *netdev) * * Returns 0 on success, negative on failure **/ - static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3572,8 +3565,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. * i.e. RXBUFFER_2048 --> size-4096 slab - * however with the new *_jumbo_rx* routines, jumbo receives will use - * fragmented skbs */ + * however with the new *_jumbo_rx* routines, jumbo receives will use + * fragmented skbs + */ if (max_frame <= E1000_RXBUFFER_2048) adapter->rx_buffer_len = E1000_RXBUFFER_2048; @@ -3608,7 +3602,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) * e1000_update_stats - Update the board statistics counters * @adapter: board private structure **/ - void e1000_update_stats(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -3619,8 +3612,7 @@ void e1000_update_stats(struct e1000_adapter *adapter) #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - /* - * Prevent stats update while adapter is being reset, or if the pci + /* Prevent stats update while adapter is being reset, or if the pci * connection is down. */ if (adapter->link_speed == 0) @@ -3710,7 +3702,8 @@ void e1000_update_stats(struct e1000_adapter *adapter) /* Rx Errors */ /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ + * our own version based on RUC and ROC + */ netdev->stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + @@ -3764,7 +3757,6 @@ void e1000_update_stats(struct e1000_adapter *adapter) * @irq: interrupt number * @data: pointer to a network interface device structure **/ - static irqreturn_t e1000_intr(int irq, void *data) { struct net_device *netdev = data; @@ -3775,8 +3767,7 @@ static irqreturn_t e1000_intr(int irq, void *data) if (unlikely((!icr))) return IRQ_NONE; /* Not our interrupt */ - /* - * we might have caused the interrupt, but the above + /* we might have caused the interrupt, but the above * read cleared it, and just in case the driver is * down there is nothing to do so return handled */ @@ -3802,7 +3793,8 @@ static irqreturn_t e1000_intr(int irq, void *data) __napi_schedule(&adapter->napi); } else { /* this really should not happen! if it does it is basically a - * bug, but not a hard error, so enable ints and continue */ + * bug, but not a hard error, so enable ints and continue + */ if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_enable(adapter); } @@ -3816,7 +3808,8 @@ static irqreturn_t e1000_intr(int irq, void *data) **/ static int e1000_clean(struct napi_struct *napi, int budget) { - struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); + struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, + napi); int tx_clean_complete = 0, work_done = 0; tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]); @@ -3907,11 +3900,12 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ + * check with the clearing of time_stamp and movement of i + */ adapter->detect_tx_hung = false; if (tx_ring->buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + - (adapter->tx_timeout_factor * HZ)) && + (adapter->tx_timeout_factor * HZ)) && !(er32(STATUS) & E1000_STATUS_TXOFF)) { /* detected Tx unit hang */ @@ -3954,7 +3948,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, * @csum: receive descriptor csum field * @sk_buff: socket buffer with received data **/ - static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, u32 csum, struct sk_buff *skb) { @@ -3990,7 +3983,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, * e1000_consume_page - helper function **/ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, - u16 length) + u16 length) { bi->page = NULL; skb->len += length; @@ -4086,11 +4079,11 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, if (TBI_ACCEPT(hw, status, rx_desc->errors, length, last_byte)) { spin_lock_irqsave(&adapter->stats_lock, - irq_flags); + irq_flags); e1000_tbi_adjust_stats(hw, &adapter->stats, length, mapped); spin_unlock_irqrestore(&adapter->stats_lock, - irq_flags); + irq_flags); length--; } else { if (netdev->features & NETIF_F_RXALL) @@ -4098,7 +4091,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* recycle both page and skb */ buffer_info->skb = skb; /* an error means any chain goes out the window - * too */ + * too + */ if (rx_ring->rx_skb_top) dev_kfree_skb(rx_ring->rx_skb_top); rx_ring->rx_skb_top = NULL; @@ -4114,7 +4108,7 @@ process_skb: /* this is the beginning of a chain */ rxtop = skb; skb_fill_page_desc(rxtop, 0, buffer_info->page, - 0, length); + 0, length); } else { /* this is the middle of a chain */ skb_fill_page_desc(rxtop, @@ -4132,38 +4126,42 @@ process_skb: skb_shinfo(rxtop)->nr_frags, buffer_info->page, 0, length); /* re-use the current skb, we only consumed the - * page */ + * page + */ buffer_info->skb = skb; skb = rxtop; rxtop = NULL; e1000_consume_page(buffer_info, skb, length); } else { /* no chain, got EOP, this buf is the packet - * copybreak to save the put_page/alloc_page */ + * copybreak to save the put_page/alloc_page + */ if (length <= copybreak && skb_tailroom(skb) >= length) { u8 *vaddr; vaddr = kmap_atomic(buffer_info->page); - memcpy(skb_tail_pointer(skb), vaddr, length); + memcpy(skb_tail_pointer(skb), vaddr, + length); kunmap_atomic(vaddr); /* re-use the page, so don't erase - * buffer_info->page */ + * buffer_info->page + */ skb_put(skb, length); } else { skb_fill_page_desc(skb, 0, - buffer_info->page, 0, - length); + buffer_info->page, 0, + length); e1000_consume_page(buffer_info, skb, - length); + length); } } } /* Receive Checksum Offload XXX recompute due to CRC strip? */ e1000_rx_checksum(adapter, - (u32)(status) | - ((u32)(rx_desc->errors) << 24), - le16_to_cpu(rx_desc->csum), skb); + (u32)(status) | + ((u32)(rx_desc->errors) << 24), + le16_to_cpu(rx_desc->csum), skb); total_rx_bytes += (skb->len - 4); /* don't count FCS */ if (likely(!(netdev->features & NETIF_F_RXFCS))) @@ -4205,8 +4203,7 @@ next_desc: return cleaned; } -/* - * this should improve performance for small packets with large amounts +/* this should improve performance for small packets with large amounts * of reassembly being done in the stack */ static void e1000_check_copybreak(struct net_device *netdev, @@ -4310,9 +4307,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, last_byte)) { spin_lock_irqsave(&adapter->stats_lock, flags); e1000_tbi_adjust_stats(hw, &adapter->stats, - length, skb->data); + length, skb->data); spin_unlock_irqrestore(&adapter->stats_lock, - flags); + flags); length--; } else { if (netdev->features & NETIF_F_RXALL) @@ -4377,10 +4374,9 @@ next_desc: * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ - static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring, int cleaned_count) + struct e1000_rx_ring *rx_ring, int cleaned_count) { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -4421,7 +4417,7 @@ check_page: if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, - buffer_info->page, 0, + buffer_info->page, 0, buffer_info->length, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { @@ -4451,7 +4447,8 @@ check_page: /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); writel(i, adapter->hw.hw_addr + rx_ring->rdt); } @@ -4461,7 +4458,6 @@ check_page: * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ - static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int cleaned_count) @@ -4532,8 +4528,7 @@ map_skb: break; /* while !buffer_info->skb */ } - /* - * XXX if it was allocated cleanly it will never map to a + /* XXX if it was allocated cleanly it will never map to a * boundary crossing */ @@ -4571,7 +4566,8 @@ map_skb: /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); writel(i, hw->hw_addr + rx_ring->rdt); } @@ -4581,7 +4577,6 @@ map_skb: * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers. * @adapter: **/ - static void e1000_smartspeed(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -4594,7 +4589,8 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) if (adapter->smartspeed == 0) { /* If Master/Slave config fault is asserted twice, - * we assume back-to-back */ + * we assume back-to-back + */ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status); if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return; e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status); @@ -4607,7 +4603,7 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) adapter->smartspeed++; if (!e1000_phy_setup_autoneg(hw) && !e1000_read_phy_reg(hw, PHY_CTRL, - &phy_ctrl)) { + &phy_ctrl)) { phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); e1000_write_phy_reg(hw, PHY_CTRL, @@ -4638,7 +4634,6 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) * @ifreq: * @cmd: **/ - static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -4657,7 +4652,6 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) * @ifreq: * @cmd: **/ - static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { @@ -4919,7 +4913,8 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) hw->autoneg = 0; /* Make sure dplx is at most 1 bit and lsb of speed is not set - * for the switch() below to work */ + * for the switch() below to work + */ if ((spd & 1) || (dplx & ~1)) goto err_inval; @@ -5122,8 +5117,7 @@ static void e1000_shutdown(struct pci_dev *pdev) } #ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs +/* Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. */ diff --git a/drivers/net/ethernet/intel/e1000/e1000_param.c b/drivers/net/ethernet/intel/e1000/e1000_param.c index 750fc01..c9cde35 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_param.c +++ b/drivers/net/ethernet/intel/e1000/e1000_param.c @@ -267,7 +267,6 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter); * value exists, a default value is used. The final value is stored * in a variable in the adapter structure. **/ - void e1000_check_options(struct e1000_adapter *adapter) { struct e1000_option opt; @@ -319,7 +318,8 @@ void e1000_check_options(struct e1000_adapter *adapter) .def = E1000_DEFAULT_RXD, .arg = { .r = { .min = E1000_MIN_RXD, - .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD + .max = mac_type < e1000_82544 ? E1000_MAX_RXD : + E1000_MAX_82544_RXD }} }; @@ -408,7 +408,7 @@ void e1000_check_options(struct e1000_adapter *adapter) if (num_TxAbsIntDelay > bd) { adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; e1000_validate_option(&adapter->tx_abs_int_delay, &opt, - adapter); + adapter); } else { adapter->tx_abs_int_delay = opt.def; } @@ -426,7 +426,7 @@ void e1000_check_options(struct e1000_adapter *adapter) if (num_RxIntDelay > bd) { adapter->rx_int_delay = RxIntDelay[bd]; e1000_validate_option(&adapter->rx_int_delay, &opt, - adapter); + adapter); } else { adapter->rx_int_delay = opt.def; } @@ -444,7 +444,7 @@ void e1000_check_options(struct e1000_adapter *adapter) if (num_RxAbsIntDelay > bd) { adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; e1000_validate_option(&adapter->rx_abs_int_delay, &opt, - adapter); + adapter); } else { adapter->rx_abs_int_delay = opt.def; } @@ -479,16 +479,17 @@ void e1000_check_options(struct e1000_adapter *adapter) break; case 4: e_dev_info("%s set to simplified " - "(2000-8000) ints mode\n", opt.name); + "(2000-8000) ints mode\n", opt.name); adapter->itr_setting = adapter->itr; break; default: e1000_validate_option(&adapter->itr, &opt, - adapter); + adapter); /* save the setting, because the dynamic bits * change itr. * clear the lower two bits because they are - * used as control */ + * used as control + */ adapter->itr_setting = adapter->itr & ~3; break; } @@ -533,7 +534,6 @@ void e1000_check_options(struct e1000_adapter *adapter) * * Handles speed and duplex options on fiber adapters **/ - static void e1000_check_fiber_options(struct e1000_adapter *adapter) { int bd = adapter->bd_number; @@ -559,7 +559,6 @@ static void e1000_check_fiber_options(struct e1000_adapter *adapter) * * Handles speed and duplex options on copper adapters **/ - static void e1000_check_copper_options(struct e1000_adapter *adapter) { struct e1000_option opt; @@ -681,22 +680,22 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter) e_dev_info("Using Autonegotiation at Half Duplex only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | - ADVERTISE_100_HALF; + ADVERTISE_100_HALF; break; case FULL_DUPLEX: e_dev_info("Full Duplex specified without Speed\n"); e_dev_info("Using Autonegotiation at Full Duplex only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_10_FULL | - ADVERTISE_100_FULL | - ADVERTISE_1000_FULL; + ADVERTISE_100_FULL | + ADVERTISE_1000_FULL; break; case SPEED_10: e_dev_info("10 Mbps Speed specified without Duplex\n"); e_dev_info("Using Autonegotiation at 10 Mbps only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | - ADVERTISE_10_FULL; + ADVERTISE_10_FULL; break; case SPEED_10 + HALF_DUPLEX: e_dev_info("Forcing to 10 Mbps Half Duplex\n"); @@ -715,7 +714,7 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter) e_dev_info("Using Autonegotiation at 100 Mbps only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_100_HALF | - ADVERTISE_100_FULL; + ADVERTISE_100_FULL; break; case SPEED_100 + HALF_DUPLEX: e_dev_info("Forcing to 100 Mbps Half Duplex\n"); -- cgit v0.10.2 From e792cd916cf74315bddb2c8b2323ef498cd7bfde Mon Sep 17 00:00:00 2001 From: Koki Sanagi Date: Sun, 3 Feb 2013 14:03:55 +0000 Subject: e1000e: display a warning message when SmartSpeed works Current e1000e driver doesn't tell nothing when Link Speed is downgraded due to SmartSpeed. As a result, users suspect that there is something wrong with NIC. If the cause of it is SmartSpeed, there is no means to replace NIC. This patch make e1000e notify users that SmartSpeed worked. Signed-off-by: Koki Sanagi Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 3f7dbd1..a177b8b 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4830,6 +4830,13 @@ static void e1000_watchdog_task(struct work_struct *work) &adapter->link_speed, &adapter->link_duplex); e1000_print_link_info(adapter); + + /* check if SmartSpeed worked */ + e1000e_check_downshift(hw); + if (phy->speed_downgraded) + netdev_warn(netdev, + "Link Speed was downgraded by SmartSpeed\n"); + /* On supported PHYs, check for duplex mismatch only * if link has autonegotiated at 10/100 half */ -- cgit v0.10.2 From 3eb1a40f4b6d0c41feb60e55b53d11f70fc8ee8e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 31 Jan 2013 07:15:51 +0000 Subject: igbvf: Make next_to_watch a pointer and adjust memory barriers to avoid races This change is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. To enforce proper ordering the next_to_watch pointer is not set until after a wmb writing the values to the last descriptor in a transmit. In order to guarantee that the descriptor is not read until after the eop_desc we use the read_barrier_depends which is only really necessary on the alpha architecture. Signed-off-by: Alexander Duyck Acked-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igbvf/igbvf.h b/drivers/net/ethernet/intel/igbvf/igbvf.h index fdca7b6..a1463e3 100644 --- a/drivers/net/ethernet/intel/igbvf/igbvf.h +++ b/drivers/net/ethernet/intel/igbvf/igbvf.h @@ -127,8 +127,8 @@ struct igbvf_buffer { /* Tx */ struct { unsigned long time_stamp; + union e1000_adv_tx_desc *next_to_watch; u16 length; - u16 next_to_watch; u16 mapped_as_page; }; /* Rx */ diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index f53f713..d60cd43 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -797,20 +797,31 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) struct sk_buff *skb; union e1000_adv_tx_desc *tx_desc, *eop_desc; unsigned int total_bytes = 0, total_packets = 0; - unsigned int i, eop, count = 0; + unsigned int i, count = 0; bool cleaned = false; i = tx_ring->next_to_clean; - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); + buffer_info = &tx_ring->buffer_info[i]; + eop_desc = buffer_info->next_to_watch; + + do { + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* prevent any other reads prior to eop_desc */ + read_barrier_depends(); + + /* if DD is not set pending work has not been completed */ + if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) + break; + + /* clear next_to_watch to prevent false hangs */ + buffer_info->next_to_watch = NULL; - while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) && - (count < tx_ring->count)) { - rmb(); /* read buffer_info after eop_desc status */ for (cleaned = false; !cleaned; count++) { tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); - buffer_info = &tx_ring->buffer_info[i]; - cleaned = (i == eop); + cleaned = (tx_desc == eop_desc); skb = buffer_info->skb; if (skb) { @@ -831,10 +842,12 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) i++; if (i == tx_ring->count) i = 0; + + buffer_info = &tx_ring->buffer_info[i]; } - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); - } + + eop_desc = buffer_info->next_to_watch; + } while (count < tx_ring->count); tx_ring->next_to_clean = i; @@ -1961,7 +1974,6 @@ static int igbvf_tso(struct igbvf_adapter *adapter, context_desc->seqnum_seed = 0; buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->dma = 0; i++; if (i == tx_ring->count) @@ -2021,7 +2033,6 @@ static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, context_desc->mss_l4len_idx = 0; buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->dma = 0; i++; if (i == tx_ring->count) @@ -2061,8 +2072,7 @@ static int igbvf_maybe_stop_tx(struct net_device *netdev, int size) static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - struct sk_buff *skb, - unsigned int first) + struct sk_buff *skb) { struct igbvf_buffer *buffer_info; struct pci_dev *pdev = adapter->pdev; @@ -2077,7 +2087,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, buffer_info->length = len; /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->mapped_as_page = false; buffer_info->dma = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); @@ -2100,7 +2109,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD); buffer_info->length = len; buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->mapped_as_page = true; buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len, DMA_TO_DEVICE); @@ -2109,7 +2117,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, } tx_ring->buffer_info[i].skb = skb; - tx_ring->buffer_info[first].next_to_watch = i; return ++count; @@ -2120,7 +2127,6 @@ dma_error: buffer_info->dma = 0; buffer_info->time_stamp = 0; buffer_info->length = 0; - buffer_info->next_to_watch = 0; buffer_info->mapped_as_page = false; if (count) count--; @@ -2139,7 +2145,8 @@ dma_error: static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - int tx_flags, int count, u32 paylen, + int tx_flags, int count, + unsigned int first, u32 paylen, u8 hdr_len) { union e1000_adv_tx_desc *tx_desc = NULL; @@ -2189,6 +2196,7 @@ static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter, * such as IA-64). */ wmb(); + tx_ring->buffer_info[first].next_to_watch = tx_desc; tx_ring->next_to_use = i; writel(i, adapter->hw.hw_addr + tx_ring->tail); /* we need this if more than one processor can write to our tail @@ -2255,11 +2263,11 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, * count reflects descriptors mapped, if 0 then mapping error * has occurred and we need to rewind the descriptor queue */ - count = igbvf_tx_map_adv(adapter, tx_ring, skb, first); + count = igbvf_tx_map_adv(adapter, tx_ring, skb); if (count) { igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count, - skb->len, hdr_len); + first, skb->len, hdr_len); /* Make sure there is space in the ring for the next send. */ igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4); } else { -- cgit v0.10.2 From 4507dc9f98a4155bcb85735ac6dd4158b2d391b3 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Sat, 2 Feb 2013 08:31:50 +0000 Subject: igb: increase timeout for ethtool offline self-test On several machines with i350 adapters the ethtool offline self-test sometimes fails. This happens because link auto negotiation may take longer than the timeout of 4 seconds. Increasing the timeout by 1 seconds resolves the issue. Output from a failing i350 offline self-test: while [ 1 ]; do ethtool -t eth2 offline; done The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 1 The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Signed-off-by: Stefan Assmann Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 40b5d56..a3830a8 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1891,7 +1891,7 @@ static int igb_link_test(struct igb_adapter *adapter, u64 *data) } else { hw->mac.ops.check_for_link(&adapter->hw); if (hw->mac.autoneg) - msleep(4000); + msleep(5000); if (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) *data = 1; -- cgit v0.10.2 From d3cb98691f9c8a6804897421d115b88026a562fa Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 16 Jan 2013 01:35:35 +0000 Subject: ixgbe: Define FCoE and Flow director limits much sooner to allow for changes Instead of adjusting the FCoE and Flow director limits based on the number of CPUs we can define them much sooner. This allows the user to come through later and adjust them once we have updated the code to support the set_channels ethtool operation. I am still allowing for FCoE and RSS queues to be separated if the number queues is less than the number of CPUs. This essentially treats the two groupings like they are two separate traffic classes. In addition I am changing the initialization to use the MAX_TX/RX_QUEUES defines instead of trying to compute the value as it will be possible in upcoming patches for the user to request the maximum number of queues. I have also updated things so that the upper limit on queues is exactly 63 instead of allowing it to go up to 64. The reason for this change is to address the fact thqt the driver only supports up to 63 queue vectors since the hardware supports 64 MSI-X vectors, but one must be reserved for "other" causes. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index d268c7b..4a2831c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -278,15 +278,10 @@ enum ixgbe_ring_f_enum { #define IXGBE_MAX_RSS_INDICES 16 #define IXGBE_MAX_VMDQ_INDICES 64 -#define IXGBE_MAX_FDIR_INDICES 64 -#ifdef IXGBE_FCOE +#define IXGBE_MAX_FDIR_INDICES 63 /* based on q_vector limit */ #define IXGBE_MAX_FCOE_INDICES 8 -#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) -#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) -#else -#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES -#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES -#endif /* IXGBE_FCOE */ +#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + 1) +#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + 1) struct ixgbe_ring_feature { u16 limit; /* upper limit on feature indices */ u16 indices; /* current value of indices */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 9ffa330..9fafa38 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -386,7 +386,6 @@ static bool ixgbe_set_dcb_sriov_queues(struct ixgbe_adapter *adapter) fcoe = &adapter->ring_feature[RING_F_FCOE]; /* limit ourselves based on feature limits */ - fcoe_i = min_t(u16, fcoe_i, num_online_cpus()); fcoe_i = min_t(u16, fcoe_i, fcoe->limit); if (fcoe_i) { @@ -562,9 +561,6 @@ static bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) fcoe_i = min_t(u16, fcoe_i, fcoe->limit); if (vmdq_i > 1 && fcoe_i) { - /* reserve no more than number of CPUs */ - fcoe_i = min_t(u16, fcoe_i, num_online_cpus()); - /* alloc queues for FCoE separately */ fcoe->indices = fcoe_i; fcoe->offset = vmdq_i * rss_i; @@ -623,8 +619,7 @@ static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) if (rss_i > 1 && adapter->atr_sample_rate) { f = &adapter->ring_feature[RING_F_FDIR]; - f->indices = min_t(u16, num_online_cpus(), f->limit); - rss_i = max_t(u16, rss_i, f->indices); + rss_i = f->indices = f->limit; if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1d5e093..5fd1667 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4465,7 +4465,7 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned int rss; + unsigned int rss, fdir; u32 fwsm; #ifdef CONFIG_IXGBE_DCB int j; @@ -4485,9 +4485,10 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->ring_feature[RING_F_RSS].limit = rss; adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - adapter->ring_feature[RING_F_FDIR].limit = IXGBE_MAX_FDIR_INDICES; adapter->max_q_vectors = MAX_Q_VECTORS_82599; adapter->atr_sample_rate = 20; + fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus()); + adapter->ring_feature[RING_F_FDIR].limit = fdir; adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; #ifdef CONFIG_IXGBE_DCA adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; @@ -7230,9 +7231,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; static int cards_found; int i, err, pci_using_dac; + unsigned int indices = MAX_TX_QUEUES; u8 part_str[IXGBE_PBANUM_LENGTH]; - unsigned int indices = num_possible_cpus(); - unsigned int dcb_max = 0; #ifdef IXGBE_FCOE u16 device_caps; #endif @@ -7281,25 +7281,15 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); pci_save_state(pdev); + if (ii->mac == ixgbe_mac_82598EB) { #ifdef CONFIG_IXGBE_DCB - if (ii->mac == ixgbe_mac_82598EB) - dcb_max = min_t(unsigned int, indices * MAX_TRAFFIC_CLASS, - IXGBE_MAX_RSS_INDICES); - else - dcb_max = min_t(unsigned int, indices * MAX_TRAFFIC_CLASS, - IXGBE_MAX_FDIR_INDICES); + /* 8 TC w/ 4 queues per TC */ + indices = 4 * MAX_TRAFFIC_CLASS; +#else + indices = IXGBE_MAX_RSS_INDICES; #endif + } - if (ii->mac == ixgbe_mac_82598EB) - indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES); - else - indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES); - -#ifdef IXGBE_FCOE - indices += min_t(unsigned int, num_possible_cpus(), - IXGBE_MAX_FCOE_INDICES); -#endif - indices = max_t(unsigned int, dcb_max, indices); netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); if (!netdev) { err = -ENOMEM; @@ -7454,13 +7444,17 @@ skip_sriov: #ifdef IXGBE_FCOE if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { + unsigned int fcoe_l; + if (hw->mac.ops.get_device_caps) { hw->mac.ops.get_device_caps(hw, &device_caps); if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; } - adapter->ring_feature[RING_F_FCOE].limit = IXGBE_FCRETA_SIZE; + + fcoe_l = min_t(int, IXGBE_FCRETA_SIZE, num_online_cpus()); + adapter->ring_feature[RING_F_FCOE].limit = fcoe_l; netdev->features |= NETIF_F_FSO | NETIF_F_FCOE_CRC; -- cgit v0.10.2 From fd786b7b4731b7aa9796cfd251238ffaab71d725 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 12 Jan 2013 06:33:31 +0000 Subject: ixgbe: Add function for setting XPS queue mapping This change adds support for ixgbe to configure the XPS queue mapping on load. The result of this change is that on open we will now be resetting the number of Tx queues, and then setting the default configuration for XPS based on if ATR is enabled or disabled. Signed-off-by: Alexander Duyck Reviewed-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 4a2831c..5213563 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -201,6 +201,7 @@ struct ixgbe_rx_queue_stats { enum ixgbe_ring_state_t { __IXGBE_TX_FDIR_INIT_DONE, + __IXGBE_TX_XPS_INIT_DONE, __IXGBE_TX_DETECT_HANG, __IXGBE_HANG_CHECK_ARMED, __IXGBE_RX_RSC_ENABLED, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 9fafa38..ef5f7a6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -771,19 +771,23 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, { struct ixgbe_q_vector *q_vector; struct ixgbe_ring *ring; - int node = -1; + int node = NUMA_NO_NODE; int cpu = -1; int ring_count, size; + u8 tcs = netdev_get_num_tc(adapter->netdev); ring_count = txr_count + rxr_count; size = sizeof(struct ixgbe_q_vector) + (sizeof(struct ixgbe_ring) * ring_count); /* customize cpu for Flow Director mapping */ - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - if (cpu_online(v_idx)) { - cpu = v_idx; - node = cpu_to_node(cpu); + if ((tcs <= 1) && !(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) { + u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; + if (rss_i > 1 && adapter->atr_sample_rate) { + if (cpu_online(v_idx)) { + cpu = v_idx; + node = cpu_to_node(cpu); + } } } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 5fd1667..16c9858 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2813,6 +2813,16 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, ring->atr_sample_rate = 0; } + /* initialize XPS */ + if (!test_and_set_bit(__IXGBE_TX_XPS_INIT_DONE, &ring->state)) { + struct ixgbe_q_vector *q_vector = ring->q_vector; + + if (q_vector) + netif_set_xps_queue(adapter->netdev, + &q_vector->affinity_mask, + ring->queue_index); + } + clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state); /* enable queue */ -- cgit v0.10.2 From 97488bd1f3f4f79a4000c66802363390701768e6 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 12 Jan 2013 06:33:37 +0000 Subject: ixgbe: Update ixgbe driver to use __netdev_pick_tx in ixgbe_select_queue This change updates the ixgbe driver to use __netdev_pick_tx instead of the current logic it is using to select a queue. The main result of this change is that ixgbe can now fully support XPS, and in the case of non-FCoE enabled configs it means we don't need to have our own ndo_select_queue. Signed-off-by: Alexander Duyck Reviewed-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 16c9858..872d7aa 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6374,38 +6374,40 @@ static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) return __ixgbe_maybe_stop_tx(tx_ring, size); } +#ifdef IXGBE_FCOE static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) { - struct ixgbe_adapter *adapter = netdev_priv(dev); - int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : - smp_processor_id(); -#ifdef IXGBE_FCOE - __be16 protocol = vlan_get_protocol(skb); + struct ixgbe_adapter *adapter; + struct ixgbe_ring_feature *f; + int txq; - if (((protocol == htons(ETH_P_FCOE)) || - (protocol == htons(ETH_P_FIP))) && - (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) { - struct ixgbe_ring_feature *f; + /* + * only execute the code below if protocol is FCoE + * or FIP and we have FCoE enabled on the adapter + */ + switch (vlan_get_protocol(skb)) { + case __constant_htons(ETH_P_FCOE): + case __constant_htons(ETH_P_FIP): + adapter = netdev_priv(dev); - f = &adapter->ring_feature[RING_F_FCOE]; + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) + break; + default: + return __netdev_pick_tx(dev, skb); + } - while (txq >= f->indices) - txq -= f->indices; - txq += adapter->ring_feature[RING_F_FCOE].offset; + f = &adapter->ring_feature[RING_F_FCOE]; - return txq; - } -#endif + txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : + smp_processor_id(); - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - while (unlikely(txq >= dev->real_num_tx_queues)) - txq -= dev->real_num_tx_queues; - return txq; - } + while (txq >= f->indices) + txq -= f->indices; - return skb_tx_hash(dev, skb); + return txq + f->offset; } +#endif netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring) @@ -7129,7 +7131,9 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_open = ixgbe_open, .ndo_stop = ixgbe_close, .ndo_start_xmit = ixgbe_xmit_frame, +#ifdef IXGBE_FCOE .ndo_select_queue = ixgbe_select_queue, +#endif .ndo_set_rx_mode = ixgbe_set_rx_mode, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = ixgbe_set_mac, -- cgit v0.10.2 From cca73c59c414f15d02fac69c947a9efc15bca271 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 12 Jan 2013 06:33:44 +0000 Subject: ixgbe: Make ixgbe_setup_tc usable even when DCB is not enabled The ixgbe_setup_tc code is essentially the same code we need any time we have to update the number of queues. As such I am making it available always and just stripping the DCB specific bits out when DCB is disabled instead of stripping the entire function. Signed-off-by: Alexander Duyck Reviewed-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 5213563..b91f9b6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -700,8 +700,8 @@ extern bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); extern void ixgbe_set_rx_mode(struct net_device *netdev); #ifdef CONFIG_IXGBE_DCB extern void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter); -extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); #endif +extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32); extern void ixgbe_do_reset(struct net_device *netdev); #ifdef CONFIG_IXGBE_HWMON diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 872d7aa..aea252a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6812,6 +6812,7 @@ static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter) } } +#endif /* CONFIG_IXGBE_DCB */ /** * ixgbe_setup_tc - configure net_device for multiple traffic classes * @@ -6837,6 +6838,7 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) ixgbe_close(dev); ixgbe_clear_interrupt_scheme(adapter); +#ifdef CONFIG_IXGBE_DCB if (tc) { netdev_set_num_tc(dev, tc); ixgbe_set_prio_tc_map(adapter); @@ -6859,31 +6861,24 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) adapter->dcb_cfg.pfc_mode_enable = false; } - ixgbe_init_interrupt_scheme(adapter); ixgbe_validate_rtr(adapter, tc); + +#endif /* CONFIG_IXGBE_DCB */ + ixgbe_init_interrupt_scheme(adapter); + if (netif_running(dev)) - ixgbe_open(dev); + return ixgbe_open(dev); return 0; } -#endif /* CONFIG_IXGBE_DCB */ #ifdef CONFIG_PCI_IOV void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; rtnl_lock(); -#ifdef CONFIG_IXGBE_DCB ixgbe_setup_tc(netdev, netdev_get_num_tc(netdev)); -#else - if (netif_running(netdev)) - ixgbe_close(netdev); - ixgbe_clear_interrupt_scheme(adapter); - ixgbe_init_interrupt_scheme(adapter); - if (netif_running(netdev)) - ixgbe_open(netdev); -#endif rtnl_unlock(); } -- cgit v0.10.2 From 5348c9dbf379dc5b70e3a6a4f2f79c2c43720b37 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 12 Jan 2013 06:33:52 +0000 Subject: ixgbe: Add support for displaying the number of Tx/Rx channels This patch adds support for the ethtool get_channels operation. Since the ixgbe driver has to support DCB as well as the other modes the assumption I made here is that the number of channels in DCB modes refers to the number of queues per traffic class, not the number of queues total. Signed-off-by: Alexander Duyck Reviewed-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index db67359..cba27c6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2731,6 +2731,77 @@ static int ixgbe_get_ts_info(struct net_device *dev, return 0; } +static unsigned int ixgbe_max_channels(struct ixgbe_adapter *adapter) +{ + unsigned int max_combined; + u8 tcs = netdev_get_num_tc(adapter->netdev); + + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { + /* We only support one q_vector without MSI-X */ + max_combined = 1; + } else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + /* SR-IOV currently only allows one queue on the PF */ + max_combined = 1; + } else if (tcs > 1) { + /* For DCB report channels per traffic class */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + /* 8 TC w/ 4 queues per TC */ + max_combined = 4; + } else if (tcs > 4) { + /* 8 TC w/ 8 queues per TC */ + max_combined = 8; + } else { + /* 4 TC w/ 16 queues per TC */ + max_combined = 16; + } + } else if (adapter->atr_sample_rate) { + /* support up to 64 queues with ATR */ + max_combined = IXGBE_MAX_FDIR_INDICES; + } else { + /* support up to 16 queues with RSS */ + max_combined = IXGBE_MAX_RSS_INDICES; + } + + return max_combined; +} + +static void ixgbe_get_channels(struct net_device *dev, + struct ethtool_channels *ch) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + + /* report maximum channels */ + ch->max_combined = ixgbe_max_channels(adapter); + + /* report info for other vector */ + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + ch->max_other = NON_Q_VECTORS; + ch->other_count = NON_Q_VECTORS; + } + + /* record RSS queues */ + ch->combined_count = adapter->ring_feature[RING_F_RSS].indices; + + /* nothing else to report if RSS is disabled */ + if (ch->combined_count == 1) + return; + + /* we do not support ATR queueing if SR-IOV is enabled */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + return; + + /* same thing goes for being DCB enabled */ + if (netdev_get_num_tc(dev) > 1) + return; + + /* if ATR is disabled we can exit */ + if (!adapter->atr_sample_rate) + return; + + /* report flow director queues as maximum channels */ + ch->combined_count = adapter->ring_feature[RING_F_FDIR].indices; +} + static const struct ethtool_ops ixgbe_ethtool_ops = { .get_settings = ixgbe_get_settings, .set_settings = ixgbe_set_settings, @@ -2759,6 +2830,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .set_coalesce = ixgbe_set_coalesce, .get_rxnfc = ixgbe_get_rxnfc, .set_rxnfc = ixgbe_set_rxnfc, + .get_channels = ixgbe_get_channels, .get_ts_info = ixgbe_get_ts_info, }; -- cgit v0.10.2 From 4c696ca9fbabc5f94a3c6db7f009e73f0ef21831 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 17 Jan 2013 08:39:33 +0000 Subject: ixgbe: Add support for set_channels ethtool operation This change adds support for the ethtool set_channels operation. Since the ixgbe driver has to support DCB as well as the other modes the assumption I made here is that the number of channels in DCB modes refers to the number of queues per traffic class, not the number of queues total. CC: Ben Hutchings Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index cba27c6..7349a8b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2802,6 +2802,43 @@ static void ixgbe_get_channels(struct net_device *dev, ch->combined_count = adapter->ring_feature[RING_F_FDIR].indices; } +static int ixgbe_set_channels(struct net_device *dev, + struct ethtool_channels *ch) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + unsigned int count = ch->combined_count; + + /* verify they are not requesting separate vectors */ + if (!count || ch->rx_count || ch->tx_count) + return -EINVAL; + + /* verify other_count has not changed */ + if (ch->other_count != NON_Q_VECTORS) + return -EINVAL; + + /* verify the number of channels does not exceed hardware limits */ + if (count > ixgbe_max_channels(adapter)) + return -EINVAL; + + /* update feature limits from largest to smallest supported values */ + adapter->ring_feature[RING_F_FDIR].limit = count; + + /* cap RSS limit at 16 */ + if (count > IXGBE_MAX_RSS_INDICES) + count = IXGBE_MAX_RSS_INDICES; + adapter->ring_feature[RING_F_RSS].limit = count; + +#ifdef IXGBE_FCOE + /* cap FCoE limit at 8 */ + if (count > IXGBE_FCRETA_SIZE) + count = IXGBE_FCRETA_SIZE; + adapter->ring_feature[RING_F_FCOE].limit = count; + +#endif + /* use setup TC to update any traffic class queue mapping */ + return ixgbe_setup_tc(dev, netdev_get_num_tc(dev)); +} + static const struct ethtool_ops ixgbe_ethtool_ops = { .get_settings = ixgbe_get_settings, .set_settings = ixgbe_set_settings, @@ -2831,6 +2868,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .get_rxnfc = ixgbe_get_rxnfc, .set_rxnfc = ixgbe_set_rxnfc, .get_channels = ixgbe_get_channels, + .set_channels = ixgbe_set_channels, .get_ts_info = ixgbe_get_ts_info, }; -- cgit v0.10.2 From d0310dc415a670ae2b2e27076b4685d988830479 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 18 Jan 2013 02:16:41 +0000 Subject: ixgbe: fix possible data corruption in read_i2c_byte This patch makes sure that the SW lock is released after all i2c operations complete in the retry code path. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index eb534a0..d7b5bd0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1307,9 +1307,9 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, break; fail: + ixgbe_i2c_bus_clear(hw); hw->mac.ops.release_swfw_sync(hw, swfw_mask); msleep(100); - ixgbe_i2c_bus_clear(hw); retry++; if (retry < max_retry) hw_dbg(hw, "I2C byte read error - Retrying.\n"); -- cgit v0.10.2 From 51d0420b0ad9f0a9972165fef551628bcc95ee87 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 18 Jan 2013 02:17:11 +0000 Subject: ixgbe: cleanup error checking in ixgbe_identify_sfp_module_generic() This patch replaces instances where a return code from i2c operations were checked against a list of error codes with a much simpler if ( status != 0 ) check. Some whitespace cleanups included. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index d7b5bd0..060d2ad 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -852,11 +852,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, - &identifier); + &identifier); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; /* LAN ID is needed for sfp_type determination */ @@ -870,26 +868,20 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY, &cable_tech); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; /* ID Module @@ -984,30 +976,24 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (hw->phy.type != ixgbe_phy_nl) { hw->phy.id = identifier; status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE0, - &oui_bytes[0]); + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE1, &oui_bytes[1]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE2, &oui_bytes[2]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; vendor_oui = -- cgit v0.10.2 From 71858acbe5c38e82554d92d041741ea949e46b99 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Aur=C3=A9lien=20Guillaume?= Date: Thu, 17 Jan 2013 06:55:24 +0000 Subject: ixgbe: implement SFF diagnostic monitoring via ethtool MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for reading data from SFP+ modules over i2c. Signed-off-by: Aurélien Guillaume Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index b91f9b6..196002b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -620,6 +620,7 @@ enum ixgbe_state_t { __IXGBE_DOWN, __IXGBE_SERVICE_SCHED, __IXGBE_IN_SFP_INIT, + __IXGBE_READ_I2C, }; struct ixgbe_cb { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 7349a8b..e6cebdc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -39,6 +39,7 @@ #include #include "ixgbe.h" +#include "ixgbe_phy.h" #define IXGBE_ALL_RAR_ENTRIES 16 @@ -2839,6 +2840,117 @@ static int ixgbe_set_channels(struct net_device *dev, return ixgbe_setup_tc(dev, netdev_get_num_tc(dev)); } +static int ixgbe_get_module_info(struct net_device *dev, + struct ethtool_modinfo *modinfo) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + u32 status; + u8 sff8472_rev, addr_mode; + int ret_val = 0; + bool page_swap = false; + + /* avoid concurent i2c reads */ + while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + msleep(100); + + /* used by the service task */ + set_bit(__IXGBE_READ_I2C, &adapter->state); + + /* Check whether we support SFF-8472 or not */ + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_SFF_8472_COMP, + &sff8472_rev); + if (status != 0) { + ret_val = -EIO; + goto err_out; + } + + /* addressing mode is not supported */ + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_SFF_8472_SWAP, + &addr_mode); + if (status != 0) { + ret_val = -EIO; + goto err_out; + } + + if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) { + e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n"); + page_swap = true; + } + + if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) { + /* We have a SFP, but it does not support SFF-8472 */ + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } else { + /* We have a SFP which supports a revision of SFF-8472. */ + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } + +err_out: + clear_bit(__IXGBE_READ_I2C, &adapter->state); + return ret_val; +} + +static int ixgbe_get_module_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, + u8 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + u32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u8 databyte = 0xFF; + int i = 0; + int ret_val = 0; + + /* ixgbe_get_module_info is called before this function in all + * cases, so we do not need any checks we already do above, + * and can trust ee->len to be a known value. + */ + + while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + msleep(100); + set_bit(__IXGBE_READ_I2C, &adapter->state); + + /* Read the first block, SFF-8079 */ + for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i++) { + status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); + if (status != 0) { + /* Error occured while reading module */ + ret_val = -EIO; + goto err_out; + } + data[i] = databyte; + } + + /* If the second block is requested, check if SFF-8472 is supported. */ + if (ee->len == ETH_MODULE_SFF_8472_LEN) { + if (data[IXGBE_SFF_SFF_8472_COMP] == IXGBE_SFF_SFF_8472_UNSUP) + return -EOPNOTSUPP; + + /* Read the second block, SFF-8472 */ + for (i = ETH_MODULE_SFF_8079_LEN; + i < ETH_MODULE_SFF_8472_LEN; i++) { + status = hw->phy.ops.read_i2c_sff8472(hw, + i - ETH_MODULE_SFF_8079_LEN, &databyte); + if (status != 0) { + /* Error occured while reading module */ + ret_val = -EIO; + goto err_out; + } + data[i] = databyte; + } + } + +err_out: + clear_bit(__IXGBE_READ_I2C, &adapter->state); + + return ret_val; +} + static const struct ethtool_ops ixgbe_ethtool_ops = { .get_settings = ixgbe_get_settings, .set_settings = ixgbe_set_settings, @@ -2870,6 +2982,8 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .get_channels = ixgbe_get_channels, .set_channels = ixgbe_set_channels, .get_ts_info = ixgbe_get_ts_info, + .get_module_info = ixgbe_get_module_info, + .get_module_eeprom = ixgbe_get_module_eeprom, }; void ixgbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index aea252a..b0b72fc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5709,6 +5709,10 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; + /* concurent i2c reads are not supported */ + if (test_bit(__IXGBE_READ_I2C, &adapter->state)) + return; + /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return; -- cgit v0.10.2 From 67da097e1295071da700862e7faa8a294b182b42 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 25 Jan 2013 06:19:20 +0000 Subject: ixgbe: fix Tx timeouts with BQL This patch makes sure that TXDCTL.WTHRESH is set to 1 when BQL is enabled and EITR is set to more than 100k interrupts per second to avoid Tx timeouts. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index e6cebdc..f4d2e9e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2113,13 +2113,17 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_q_vector *q_vector; int i; - u16 tx_itr_param, rx_itr_param; + u16 tx_itr_param, rx_itr_param, tx_itr_prev; bool need_reset = false; - /* don't accept tx specific changes if we've got mixed RxTx vectors */ - if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count - && ec->tx_coalesce_usecs) - return -EINVAL; + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) { + /* reject Tx specific changes in case of mixed RxTx vectors */ + if (ec->tx_coalesce_usecs) + return -EINVAL; + tx_itr_prev = adapter->rx_itr_setting; + } else { + tx_itr_prev = adapter->tx_itr_setting; + } if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) || (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2))) @@ -2145,8 +2149,25 @@ static int ixgbe_set_coalesce(struct net_device *netdev, else tx_itr_param = adapter->tx_itr_setting; + /* mixed Rx/Tx */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) + adapter->tx_itr_setting = adapter->rx_itr_setting; + +#if IS_ENABLED(CONFIG_BQL) + /* detect ITR changes that require update of TXDCTL.WTHRESH */ + if ((adapter->tx_itr_setting > 1) && + (adapter->tx_itr_setting < IXGBE_100K_ITR)) { + if ((tx_itr_prev == 1) || + (tx_itr_prev > IXGBE_100K_ITR)) + need_reset = true; + } else { + if ((tx_itr_prev > 1) && + (tx_itr_prev < IXGBE_100K_ITR)) + need_reset = true; + } +#endif /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_update_rsc(adapter); + need_reset |= ixgbe_update_rsc(adapter); for (i = 0; i < adapter->num_q_vectors; i++) { q_vector = adapter->q_vector[i]; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index b0b72fc..68478d6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2786,13 +2786,19 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, /* * set WTHRESH to encourage burst writeback, it should not be set - * higher than 1 when ITR is 0 as it could cause false TX hangs + * higher than 1 when: + * - ITR is 0 as it could cause false TX hangs + * - ITR is set to > 100k int/sec and BQL is enabled * * In order to avoid issues WTHRESH + PTHRESH should always be equal * to or less than the number of on chip descriptors, which is * currently 40. */ +#if IS_ENABLED(CONFIG_BQL) + if (!ring->q_vector || (ring->q_vector->itr < IXGBE_100K_ITR)) +#else if (!ring->q_vector || (ring->q_vector->itr < 8)) +#endif txdctl |= (1 << 16); /* WTHRESH = 1 */ else txdctl |= (8 << 16); /* WTHRESH = 8 */ -- cgit v0.10.2 From 990a3158002ff19b2d665334bc7a21a8887a123d Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 26 Jan 2013 02:08:14 +0000 Subject: ixgbe: Update DESC_NEEDED define to adjust for changes to MAX_SKB_FRAGS Recent changes have made it so that MAX_SKB_FRAGS is now never less than 16. As a result we were seeing issues on systems with 64K pages as it would cause DESC_NEEDED to increase to 68, and we would need over 136 descriptors free before clean_tx_irq would wake the queue. This patch makes it so that DESC_NEEDED is always MAX_SKB_FRAGS + 4. This should prevent any possible deadlocks on the systems with 64K pages as we will now only require 42 descriptors to wake. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 196002b..a8e10cf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -156,7 +156,7 @@ struct vf_macvlans { /* Tx Descriptors needed, worst case */ #define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD) -#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) /* wrapper around a pointer to a socket buffer, * so a DMA handle can be stored along with the buffer */ -- cgit v0.10.2 From 6295ca184b6216ecde68f16f487a524734761adf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 10:11:24 +0100 Subject: cfg80211: add correct docbook entries Update the 802.11 book to list the correct data structures. Signed-off-by: Johannes Berg diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 42e7f03..284ced7 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -107,8 +107,8 @@ !Finclude/net/cfg80211.h key_params !Finclude/net/cfg80211.h survey_info_flags !Finclude/net/cfg80211.h survey_info -!Finclude/net/cfg80211.h beacon_parameters -!Finclude/net/cfg80211.h plink_actions +!Finclude/net/cfg80211.h cfg80211_beacon_data +!Finclude/net/cfg80211.h cfg80211_ap_settings !Finclude/net/cfg80211.h station_parameters !Finclude/net/cfg80211.h station_info_flags !Finclude/net/cfg80211.h rate_info_flags -- cgit v0.10.2 From 572078be54856bf751af9a43d501ffb8d09b1ea7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 11:47:50 +0100 Subject: mac80211: fix harmless station flush warning If an interface is set down while authenticating or associating, there's a station entry that will be removed by the flushing in do_stop() and that will cause a warning. It's otherwise harmless, but avoid the warning by calling ieee80211_mgd_stop() first. Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index a1f7194..2c059e5 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -696,6 +696,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, ieee80211_roc_purge(sdata); + if (sdata->vif.type == NL80211_IFTYPE_STATION) + ieee80211_mgd_stop(sdata); + /* * Remove all stations associated with this interface. * @@ -783,8 +786,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, } } spin_unlock_irqrestore(&ps->bc_buf.lock, flags); - } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { - ieee80211_mgd_stop(sdata); } if (going_down) -- cgit v0.10.2 From 52ac8c488774b7ac6d1b0ed4c323b5de90d39d6e Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Sat, 16 Feb 2013 10:41:04 -0800 Subject: mac80211: clean up mesh HT operation ieee80211_ht_cap_ie_to_sta_ht_cap() will clean up the ht_supported flag and station bandwidth field for us if the peer beacon doesn't have an HT capability element (is operating as non-HT). Also, we don't really need a special station ch_width member to track the station operating mode any more so use sta.bandwidth instead. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 0b58e81..d74bdf9 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -129,7 +129,6 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sta_info *sta; - u32 changed = 0; u16 ht_opmode; bool non_ht_sta = false, ht20_sta = false; @@ -142,23 +141,19 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata) sta->plink_state != NL80211_PLINK_ESTAB) continue; - switch (sta->ch_width) { - case NL80211_CHAN_WIDTH_20_NOHT: - mpl_dbg(sdata, - "mesh_plink %pM: nonHT sta (%pM) is present\n", - sdata->vif.addr, sta->sta.addr); + if (sta->sta.bandwidth > IEEE80211_STA_RX_BW_20) + continue; + + if (!sta->sta.ht_cap.ht_supported) { + mpl_dbg(sdata, "nonHT sta (%pM) is present\n", + sta->sta.addr); non_ht_sta = true; - goto out; - case NL80211_CHAN_WIDTH_20: - mpl_dbg(sdata, - "mesh_plink %pM: HT20 sta (%pM) is present\n", - sdata->vif.addr, sta->sta.addr); - ht20_sta = true; - default: break; } + + mpl_dbg(sdata, "HT20 sta (%pM) is present\n", sta->sta.addr); + ht20_sta = true; } -out: rcu_read_unlock(); if (non_ht_sta) @@ -169,16 +164,13 @@ out: else ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE; - if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { - sdata->vif.bss_conf.ht_operation_mode = ht_opmode; - sdata->u.mesh.mshcfg.ht_opmode = ht_opmode; - changed = BSS_CHANGED_HT; - mpl_dbg(sdata, - "mesh_plink %pM: protection mode changed to %d\n", - sdata->vif.addr, ht_opmode); - } + if (sdata->vif.bss_conf.ht_operation_mode == ht_opmode) + return 0; - return changed; + sdata->vif.bss_conf.ht_operation_mode = ht_opmode; + sdata->u.mesh.mshcfg.ht_opmode = ht_opmode; + mpl_dbg(sdata, "selected new HT protection mode %d\n", ht_opmode); + return BSS_CHANGED_HT; } /** @@ -371,24 +363,18 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (sta->sta.supp_rates[band] != rates) changed |= IEEE80211_RC_SUPP_RATES_CHANGED; sta->sta.supp_rates[band] = rates; - if (elems->ht_cap_elem && - sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) - ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, sta); - else - memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap)); - if (elems->ht_operation) { - struct cfg80211_chan_def chandef; + if (ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, + elems->ht_cap_elem, sta)) + changed |= IEEE80211_RC_BW_CHANGED; - if (!(elems->ht_operation->ht_param & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; - ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, - elems->ht_operation, &chandef); - if (sta->ch_width != chandef.width) + /* HT peer is operating 20MHz-only */ + if (elems->ht_operation && + !(elems->ht_operation->ht_param & + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) { + if (sta->sta.bandwidth != IEEE80211_STA_RX_BW_20) changed |= IEEE80211_RC_BW_CHANGED; - sta->ch_width = chandef.width; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; } if (insert) diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 63dfdb5..4947341 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -285,7 +285,6 @@ struct sta_ampdu_mlme { * @t_offset: timing offset relative to this host * @t_offset_setpoint: reference timing offset of this sta to be used when * calculating clockdrift - * @ch_width: peer's channel width * @local_pm: local link-specific power save mode * @peer_pm: peer-specific power save mode towards local STA * @nonpeer_pm: STA power save mode towards non-peer neighbors @@ -386,7 +385,6 @@ struct sta_info { struct timer_list plink_timer; s64 t_offset; s64 t_offset_setpoint; - enum nl80211_chan_width ch_width; /* mesh power save */ enum nl80211_mesh_power_mode local_pm; enum nl80211_mesh_power_mode peer_pm; -- cgit v0.10.2 From 95e48addba6f9271aed51d9d3eaccbfc99a914b4 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Sat, 16 Feb 2013 10:41:05 -0800 Subject: mac80211: stringify mesh peering events Convert mesh peering events into strings and make the debug output a little easier to read. Also stop printing the llid and plid since these don't change across peering states and are random numbers anyway so they just amount to noise. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index d74bdf9..07d396d 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -37,6 +37,28 @@ enum plink_event { CLS_IGNR }; +static const char * const mplstates[] = { + [NL80211_PLINK_LISTEN] = "LISTEN", + [NL80211_PLINK_OPN_SNT] = "OPN-SNT", + [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD", + [NL80211_PLINK_CNF_RCVD] = "CNF_RCVD", + [NL80211_PLINK_ESTAB] = "ESTAB", + [NL80211_PLINK_HOLDING] = "HOLDING", + [NL80211_PLINK_BLOCKED] = "BLOCKED" +}; + +static const char * const mplevents[] = { + [PLINK_UNDEFINED] = "NONE", + [OPN_ACPT] = "OPN_ACPT", + [OPN_RJCT] = "OPN_RJCT", + [OPN_IGNR] = "OPN_IGNR", + [CNF_ACPT] = "CNF_ACPT", + [CNF_RJCT] = "CNF_RJCT", + [CNF_IGNR] = "CNF_IGNR", + [CLS_ACPT] = "CLS_ACPT", + [CLS_IGNR] = "CLS_IGNR" +}; + static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, enum ieee80211_self_protected_actioncode action, u8 *da, __le16 llid, __le16 plid, __le16 reason); @@ -668,15 +690,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, u8 *baseaddr; u32 changed = 0; __le16 plid, llid, reason; - static const char * const mplstates[] = { - [NL80211_PLINK_LISTEN] = "LISTEN", - [NL80211_PLINK_OPN_SNT] = "OPN-SNT", - [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD", - [NL80211_PLINK_CNF_RCVD] = "CNF_RCVD", - [NL80211_PLINK_ESTAB] = "ESTAB", - [NL80211_PLINK_HOLDING] = "HOLDING", - [NL80211_PLINK_BLOCKED] = "BLOCKED" - }; /* need action_code, aux */ if (len < IEEE80211_MIN_ACTION_SIZE + 3) @@ -849,11 +862,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, } } - mpl_dbg(sdata, - "Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n", - mgmt->sa, mplstates[sta->plink_state], - le16_to_cpu(sta->llid), le16_to_cpu(sta->plid), - event); + mpl_dbg(sdata, "peer %pM in state %s got event %s\n", mgmt->sa, + mplstates[sta->plink_state], mplevents[event]); reason = 0; spin_lock_bh(&sta->lock); switch (sta->plink_state) { -- cgit v0.10.2 From c39ac036add6b0696fb61b4d4733d671ca031723 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Sat, 16 Feb 2013 10:41:06 -0800 Subject: mac80211: don't spam mesh probe response messages If mesh plink debugging is enabled, this gets annoying in a crowded environment, fast. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index b022332..29ce2aa 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -925,7 +925,6 @@ ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); memcpy(hdr->da, mgmt->sa, ETH_ALEN); - mpl_dbg(sdata, "sending probe resp. to %pM\n", hdr->da); IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; ieee80211_tx_skb(sdata, presp); out: -- cgit v0.10.2 From 279e9f2ff7351a7908f964332e778049712cbd5b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 15 Feb 2013 18:14:48 +0000 Subject: ipv6: optimize inet6_hash_frag() Use ipv6_addr_hash() and a single jhash invocation. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index e354743..9a6428a 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -79,20 +79,7 @@ unsigned int inet6_hash_frag(__be32 id, const struct in6_addr *saddr, { u32 c; - c = jhash_3words((__force u32)saddr->s6_addr32[0], - (__force u32)saddr->s6_addr32[1], - (__force u32)saddr->s6_addr32[2], - rnd); - - c = jhash_3words((__force u32)saddr->s6_addr32[3], - (__force u32)daddr->s6_addr32[0], - (__force u32)daddr->s6_addr32[1], - c); - - c = jhash_3words((__force u32)daddr->s6_addr32[2], - (__force u32)daddr->s6_addr32[3], - (__force u32)id, - c); + c = jhash_3words(ipv6_addr_hash(saddr), ipv6_addr_hash(daddr), id, rnd); return c & (INETFRAGS_HASHSZ - 1); } -- cgit v0.10.2 From 8c6d59ee3509acd474365c34db291b950d2e66bf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 18 Feb 2013 14:57:42 +0100 Subject: cfg80211: fix station change if TDLS isn't supported Larry noticed (and bisected) that commit df881293c6ba9a12868491a717b25 "cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_station" broke secure connections. This is is the case only for drivers that don't support TDLS, where any kind of change, even just the change of authorized flag that is required for normal operation, was rejected now. To fix this, remove the checks. I have some patches that will add proper verification for all the different cases later. Cc: Jouni Malinen Bisected-by: Larry Finger Tested-by: Larry Finger Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 580ffea..35545cc 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3418,19 +3418,10 @@ nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { static int nl80211_set_station_tdls(struct genl_info *info, struct station_parameters *params) { - struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct nlattr *tb[NL80211_STA_WME_MAX + 1]; struct nlattr *nla; int err; - /* Can only set if TDLS ... */ - if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS)) - return -EOPNOTSUPP; - - /* ... with external setup is supported */ - if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)) - return -EOPNOTSUPP; - /* Dummy STA entry gets updated once the peer capabilities are known */ if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) params->ht_capa = -- cgit v0.10.2 From 31d17536631f79344c24fc44b50a0a241d0a701e Mon Sep 17 00:00:00 2001 From: Dave Young Date: Fri, 15 Feb 2013 20:19:19 +0000 Subject: net: ehea module param description fix In ehea.h the minimal entries is 2^7 - 1: #define EHEA_MIN_ENTRIES_QP 127 Thus change the module param description accordinglly Signed-off-by: Dave Young Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 91977d9..328f47c 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -76,16 +76,16 @@ MODULE_PARM_DESC(msg_level, "msg_level"); MODULE_PARM_DESC(prop_carrier_state, "Propagate carrier state of physical " "port to stack. 1:yes, 0:no. Default = 0 "); MODULE_PARM_DESC(rq3_entries, "Number of entries for Receive Queue 3 " - "[2^x - 1], x = [6..14]. Default = " + "[2^x - 1], x = [7..14]. Default = " __MODULE_STRING(EHEA_DEF_ENTRIES_RQ3) ")"); MODULE_PARM_DESC(rq2_entries, "Number of entries for Receive Queue 2 " - "[2^x - 1], x = [6..14]. Default = " + "[2^x - 1], x = [7..14]. Default = " __MODULE_STRING(EHEA_DEF_ENTRIES_RQ2) ")"); MODULE_PARM_DESC(rq1_entries, "Number of entries for Receive Queue 1 " - "[2^x - 1], x = [6..14]. Default = " + "[2^x - 1], x = [7..14]. Default = " __MODULE_STRING(EHEA_DEF_ENTRIES_RQ1) ")"); MODULE_PARM_DESC(sq_entries, " Number of entries for the Send Queue " - "[2^x - 1], x = [6..14]. Default = " + "[2^x - 1], x = [7..14]. Default = " __MODULE_STRING(EHEA_DEF_ENTRIES_SQ) ")"); MODULE_PARM_DESC(use_mcs, " Multiple receive queues, 1: enable, 0: disable, " "Default = 1"); -- cgit v0.10.2 From 96b45cbd956ce83908378d87d009b05645353f22 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 15 Feb 2013 22:20:46 +0000 Subject: net: move ioctl functions into a separated file They well deserve a separated unit. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/core/Makefile b/net/core/Makefile index 674641b..0c5e361 100644 --- a/net/core/Makefile +++ b/net/core/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.o obj-y += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \ neighbour.o rtnetlink.o utils.o link_watch.o filter.o \ - sock_diag.o + sock_diag.o dev_ioctl.o obj-$(CONFIG_XFRM) += flow.o obj-y += net-sysfs.o diff --git a/net/core/dev.c b/net/core/dev.c index 6ad3789..1932d35 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -106,7 +106,6 @@ #include #include #include -#include #include #include #include @@ -132,7 +131,6 @@ #include #include #include -#include #include #include "net-sysfs.h" @@ -1226,36 +1224,6 @@ void netdev_notify_peers(struct net_device *dev) } EXPORT_SYMBOL(netdev_notify_peers); -/** - * dev_load - load a network module - * @net: the applicable net namespace - * @name: name of interface - * - * If a network interface is not present and the process has suitable - * privileges this function loads the module. If module loading is not - * available in this kernel then it becomes a nop. - */ - -void dev_load(struct net *net, const char *name) -{ - struct net_device *dev; - int no_module; - - rcu_read_lock(); - dev = dev_get_by_name_rcu(net, name); - rcu_read_unlock(); - - no_module = !dev; - if (no_module && capable(CAP_NET_ADMIN)) - no_module = request_module("netdev-%s", name); - if (no_module && capable(CAP_SYS_MODULE)) { - if (!request_module("%s", name)) - pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n", - name); - } -} -EXPORT_SYMBOL(dev_load); - static int __dev_open(struct net_device *dev) { const struct net_device_ops *ops = dev->netdev_ops; @@ -1645,57 +1613,6 @@ static inline void net_timestamp_set(struct sk_buff *skb) __net_timestamp(SKB); \ } \ -static int net_hwtstamp_validate(struct ifreq *ifr) -{ - struct hwtstamp_config cfg; - enum hwtstamp_tx_types tx_type; - enum hwtstamp_rx_filters rx_filter; - int tx_type_valid = 0; - int rx_filter_valid = 0; - - if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) - return -EFAULT; - - if (cfg.flags) /* reserved for future extensions */ - return -EINVAL; - - tx_type = cfg.tx_type; - rx_filter = cfg.rx_filter; - - switch (tx_type) { - case HWTSTAMP_TX_OFF: - case HWTSTAMP_TX_ON: - case HWTSTAMP_TX_ONESTEP_SYNC: - tx_type_valid = 1; - break; - } - - switch (rx_filter) { - case HWTSTAMP_FILTER_NONE: - case HWTSTAMP_FILTER_ALL: - case HWTSTAMP_FILTER_SOME: - case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: - case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: - case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: - case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: - case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: - case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: - case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: - case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: - case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: - case HWTSTAMP_FILTER_PTP_V2_EVENT: - case HWTSTAMP_FILTER_PTP_V2_SYNC: - case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: - rx_filter_valid = 1; - break; - } - - if (!tx_type_valid || !rx_filter_valid) - return -ERANGE; - - return 0; -} - static inline bool is_skb_forwardable(struct net_device *dev, struct sk_buff *skb) { @@ -4300,127 +4217,6 @@ softnet_break: goto out; } -static gifconf_func_t *gifconf_list[NPROTO]; - -/** - * register_gifconf - register a SIOCGIF handler - * @family: Address family - * @gifconf: Function handler - * - * Register protocol dependent address dumping routines. The handler - * that is passed must not be freed or reused until it has been replaced - * by another handler. - */ -int register_gifconf(unsigned int family, gifconf_func_t *gifconf) -{ - if (family >= NPROTO) - return -EINVAL; - gifconf_list[family] = gifconf; - return 0; -} -EXPORT_SYMBOL(register_gifconf); - - -/* - * Map an interface index to its name (SIOCGIFNAME) - */ - -/* - * We need this ioctl for efficient implementation of the - * if_indextoname() function required by the IPv6 API. Without - * it, we would have to search all the interfaces to find a - * match. --pb - */ - -static int dev_ifname(struct net *net, struct ifreq __user *arg) -{ - struct net_device *dev; - struct ifreq ifr; - unsigned seq; - - /* - * Fetch the caller's info block. - */ - - if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) - return -EFAULT; - -retry: - seq = read_seqcount_begin(&devnet_rename_seq); - rcu_read_lock(); - dev = dev_get_by_index_rcu(net, ifr.ifr_ifindex); - if (!dev) { - rcu_read_unlock(); - return -ENODEV; - } - - strcpy(ifr.ifr_name, dev->name); - rcu_read_unlock(); - if (read_seqcount_retry(&devnet_rename_seq, seq)) - goto retry; - - if (copy_to_user(arg, &ifr, sizeof(struct ifreq))) - return -EFAULT; - return 0; -} - -/* - * Perform a SIOCGIFCONF call. This structure will change - * size eventually, and there is nothing I can do about it. - * Thus we will need a 'compatibility mode'. - */ - -static int dev_ifconf(struct net *net, char __user *arg) -{ - struct ifconf ifc; - struct net_device *dev; - char __user *pos; - int len; - int total; - int i; - - /* - * Fetch the caller's info block. - */ - - if (copy_from_user(&ifc, arg, sizeof(struct ifconf))) - return -EFAULT; - - pos = ifc.ifc_buf; - len = ifc.ifc_len; - - /* - * Loop over the interfaces, and write an info block for each. - */ - - total = 0; - for_each_netdev(net, dev) { - for (i = 0; i < NPROTO; i++) { - if (gifconf_list[i]) { - int done; - if (!pos) - done = gifconf_list[i](dev, NULL, 0); - else - done = gifconf_list[i](dev, pos + total, - len - total); - if (done < 0) - return -EFAULT; - total += done; - } - } - } - - /* - * All done. Write the updated control block back to the caller. - */ - ifc.ifc_len = total; - - /* - * Both BSD and Solaris return 0 here, so we do too. - */ - return copy_to_user(arg, &ifc, sizeof(struct ifconf)) ? -EFAULT : 0; -} - #ifdef CONFIG_PROC_FS #define BUCKET_SPACE (32 - NETDEV_HASHBITS - 1) @@ -5381,375 +5177,6 @@ int dev_change_carrier(struct net_device *dev, bool new_carrier) } EXPORT_SYMBOL(dev_change_carrier); -/* - * Perform the SIOCxIFxxx calls, inside rcu_read_lock() - */ -static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cmd) -{ - int err; - struct net_device *dev = dev_get_by_name_rcu(net, ifr->ifr_name); - - if (!dev) - return -ENODEV; - - switch (cmd) { - case SIOCGIFFLAGS: /* Get interface flags */ - ifr->ifr_flags = (short) dev_get_flags(dev); - return 0; - - case SIOCGIFMETRIC: /* Get the metric on the interface - (currently unused) */ - ifr->ifr_metric = 0; - return 0; - - case SIOCGIFMTU: /* Get the MTU of a device */ - ifr->ifr_mtu = dev->mtu; - return 0; - - case SIOCGIFHWADDR: - if (!dev->addr_len) - memset(ifr->ifr_hwaddr.sa_data, 0, sizeof ifr->ifr_hwaddr.sa_data); - else - memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr, - min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); - ifr->ifr_hwaddr.sa_family = dev->type; - return 0; - - case SIOCGIFSLAVE: - err = -EINVAL; - break; - - case SIOCGIFMAP: - ifr->ifr_map.mem_start = dev->mem_start; - ifr->ifr_map.mem_end = dev->mem_end; - ifr->ifr_map.base_addr = dev->base_addr; - ifr->ifr_map.irq = dev->irq; - ifr->ifr_map.dma = dev->dma; - ifr->ifr_map.port = dev->if_port; - return 0; - - case SIOCGIFINDEX: - ifr->ifr_ifindex = dev->ifindex; - return 0; - - case SIOCGIFTXQLEN: - ifr->ifr_qlen = dev->tx_queue_len; - return 0; - - default: - /* dev_ioctl() should ensure this case - * is never reached - */ - WARN_ON(1); - err = -ENOTTY; - break; - - } - return err; -} - -/* - * Perform the SIOCxIFxxx calls, inside rtnl_lock() - */ -static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd) -{ - int err; - struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name); - const struct net_device_ops *ops; - - if (!dev) - return -ENODEV; - - ops = dev->netdev_ops; - - switch (cmd) { - case SIOCSIFFLAGS: /* Set interface flags */ - return dev_change_flags(dev, ifr->ifr_flags); - - case SIOCSIFMETRIC: /* Set the metric on the interface - (currently unused) */ - return -EOPNOTSUPP; - - case SIOCSIFMTU: /* Set the MTU of a device */ - return dev_set_mtu(dev, ifr->ifr_mtu); - - case SIOCSIFHWADDR: - return dev_set_mac_address(dev, &ifr->ifr_hwaddr); - - case SIOCSIFHWBROADCAST: - if (ifr->ifr_hwaddr.sa_family != dev->type) - return -EINVAL; - memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data, - min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); - call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); - return 0; - - case SIOCSIFMAP: - if (ops->ndo_set_config) { - if (!netif_device_present(dev)) - return -ENODEV; - return ops->ndo_set_config(dev, &ifr->ifr_map); - } - return -EOPNOTSUPP; - - case SIOCADDMULTI: - if (!ops->ndo_set_rx_mode || - ifr->ifr_hwaddr.sa_family != AF_UNSPEC) - return -EINVAL; - if (!netif_device_present(dev)) - return -ENODEV; - return dev_mc_add_global(dev, ifr->ifr_hwaddr.sa_data); - - case SIOCDELMULTI: - if (!ops->ndo_set_rx_mode || - ifr->ifr_hwaddr.sa_family != AF_UNSPEC) - return -EINVAL; - if (!netif_device_present(dev)) - return -ENODEV; - return dev_mc_del_global(dev, ifr->ifr_hwaddr.sa_data); - - case SIOCSIFTXQLEN: - if (ifr->ifr_qlen < 0) - return -EINVAL; - dev->tx_queue_len = ifr->ifr_qlen; - return 0; - - case SIOCSIFNAME: - ifr->ifr_newname[IFNAMSIZ-1] = '\0'; - return dev_change_name(dev, ifr->ifr_newname); - - case SIOCSHWTSTAMP: - err = net_hwtstamp_validate(ifr); - if (err) - return err; - /* fall through */ - - /* - * Unknown or private ioctl - */ - default: - if ((cmd >= SIOCDEVPRIVATE && - cmd <= SIOCDEVPRIVATE + 15) || - cmd == SIOCBONDENSLAVE || - cmd == SIOCBONDRELEASE || - cmd == SIOCBONDSETHWADDR || - cmd == SIOCBONDSLAVEINFOQUERY || - cmd == SIOCBONDINFOQUERY || - cmd == SIOCBONDCHANGEACTIVE || - cmd == SIOCGMIIPHY || - cmd == SIOCGMIIREG || - cmd == SIOCSMIIREG || - cmd == SIOCBRADDIF || - cmd == SIOCBRDELIF || - cmd == SIOCSHWTSTAMP || - cmd == SIOCWANDEV) { - err = -EOPNOTSUPP; - if (ops->ndo_do_ioctl) { - if (netif_device_present(dev)) - err = ops->ndo_do_ioctl(dev, ifr, cmd); - else - err = -ENODEV; - } - } else - err = -EINVAL; - - } - return err; -} - -/* - * This function handles all "interface"-type I/O control requests. The actual - * 'doing' part of this is dev_ifsioc above. - */ - -/** - * dev_ioctl - network device ioctl - * @net: the applicable net namespace - * @cmd: command to issue - * @arg: pointer to a struct ifreq in user space - * - * Issue ioctl functions to devices. This is normally called by the - * user space syscall interfaces but can sometimes be useful for - * other purposes. The return value is the return from the syscall if - * positive or a negative errno code on error. - */ - -int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg) -{ - struct ifreq ifr; - int ret; - char *colon; - - /* One special case: SIOCGIFCONF takes ifconf argument - and requires shared lock, because it sleeps writing - to user space. - */ - - if (cmd == SIOCGIFCONF) { - rtnl_lock(); - ret = dev_ifconf(net, (char __user *) arg); - rtnl_unlock(); - return ret; - } - if (cmd == SIOCGIFNAME) - return dev_ifname(net, (struct ifreq __user *)arg); - - if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) - return -EFAULT; - - ifr.ifr_name[IFNAMSIZ-1] = 0; - - colon = strchr(ifr.ifr_name, ':'); - if (colon) - *colon = 0; - - /* - * See which interface the caller is talking about. - */ - - switch (cmd) { - /* - * These ioctl calls: - * - can be done by all. - * - atomic and do not require locking. - * - return a value - */ - case SIOCGIFFLAGS: - case SIOCGIFMETRIC: - case SIOCGIFMTU: - case SIOCGIFHWADDR: - case SIOCGIFSLAVE: - case SIOCGIFMAP: - case SIOCGIFINDEX: - case SIOCGIFTXQLEN: - dev_load(net, ifr.ifr_name); - rcu_read_lock(); - ret = dev_ifsioc_locked(net, &ifr, cmd); - rcu_read_unlock(); - if (!ret) { - if (colon) - *colon = ':'; - if (copy_to_user(arg, &ifr, - sizeof(struct ifreq))) - ret = -EFAULT; - } - return ret; - - case SIOCETHTOOL: - dev_load(net, ifr.ifr_name); - rtnl_lock(); - ret = dev_ethtool(net, &ifr); - rtnl_unlock(); - if (!ret) { - if (colon) - *colon = ':'; - if (copy_to_user(arg, &ifr, - sizeof(struct ifreq))) - ret = -EFAULT; - } - return ret; - - /* - * These ioctl calls: - * - require superuser power. - * - require strict serialization. - * - return a value - */ - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSIFNAME: - if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) - return -EPERM; - dev_load(net, ifr.ifr_name); - rtnl_lock(); - ret = dev_ifsioc(net, &ifr, cmd); - rtnl_unlock(); - if (!ret) { - if (colon) - *colon = ':'; - if (copy_to_user(arg, &ifr, - sizeof(struct ifreq))) - ret = -EFAULT; - } - return ret; - - /* - * These ioctl calls: - * - require superuser power. - * - require strict serialization. - * - do not return a value - */ - case SIOCSIFMAP: - case SIOCSIFTXQLEN: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - /* fall through */ - /* - * These ioctl calls: - * - require local superuser power. - * - require strict serialization. - * - do not return a value - */ - case SIOCSIFFLAGS: - case SIOCSIFMETRIC: - case SIOCSIFMTU: - case SIOCSIFHWADDR: - case SIOCSIFSLAVE: - case SIOCADDMULTI: - case SIOCDELMULTI: - case SIOCSIFHWBROADCAST: - case SIOCSMIIREG: - case SIOCBONDENSLAVE: - case SIOCBONDRELEASE: - case SIOCBONDSETHWADDR: - case SIOCBONDCHANGEACTIVE: - case SIOCBRADDIF: - case SIOCBRDELIF: - case SIOCSHWTSTAMP: - if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) - return -EPERM; - /* fall through */ - case SIOCBONDSLAVEINFOQUERY: - case SIOCBONDINFOQUERY: - dev_load(net, ifr.ifr_name); - rtnl_lock(); - ret = dev_ifsioc(net, &ifr, cmd); - rtnl_unlock(); - return ret; - - case SIOCGIFMEM: - /* Get the per device memory space. We can add this but - * currently do not support it */ - case SIOCSIFMEM: - /* Set the per device memory buffer space. - * Not applicable in our case */ - case SIOCSIFLINK: - return -ENOTTY; - - /* - * Unknown or private ioctl. - */ - default: - if (cmd == SIOCWANDEV || - (cmd >= SIOCDEVPRIVATE && - cmd <= SIOCDEVPRIVATE + 15)) { - dev_load(net, ifr.ifr_name); - rtnl_lock(); - ret = dev_ifsioc(net, &ifr, cmd); - rtnl_unlock(); - if (!ret && copy_to_user(arg, &ifr, - sizeof(struct ifreq))) - ret = -EFAULT; - return ret; - } - /* Take care of Wireless Extensions */ - if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) - return wext_handle_ioctl(net, &ifr, cmd, arg); - return -ENOTTY; - } -} - - /** * dev_new_index - allocate an ifindex * @net: the applicable net namespace diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c new file mode 100644 index 0000000..6cc0481 --- /dev/null +++ b/net/core/dev_ioctl.c @@ -0,0 +1,576 @@ +#include +#include +#include +#include +#include +#include +#include + +/* + * Map an interface index to its name (SIOCGIFNAME) + */ + +/* + * We need this ioctl for efficient implementation of the + * if_indextoname() function required by the IPv6 API. Without + * it, we would have to search all the interfaces to find a + * match. --pb + */ + +static int dev_ifname(struct net *net, struct ifreq __user *arg) +{ + struct net_device *dev; + struct ifreq ifr; + unsigned seq; + + /* + * Fetch the caller's info block. + */ + + if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) + return -EFAULT; + +retry: + seq = read_seqcount_begin(&devnet_rename_seq); + rcu_read_lock(); + dev = dev_get_by_index_rcu(net, ifr.ifr_ifindex); + if (!dev) { + rcu_read_unlock(); + return -ENODEV; + } + + strcpy(ifr.ifr_name, dev->name); + rcu_read_unlock(); + if (read_seqcount_retry(&devnet_rename_seq, seq)) + goto retry; + + if (copy_to_user(arg, &ifr, sizeof(struct ifreq))) + return -EFAULT; + return 0; +} + +static gifconf_func_t *gifconf_list[NPROTO]; + +/** + * register_gifconf - register a SIOCGIF handler + * @family: Address family + * @gifconf: Function handler + * + * Register protocol dependent address dumping routines. The handler + * that is passed must not be freed or reused until it has been replaced + * by another handler. + */ +int register_gifconf(unsigned int family, gifconf_func_t *gifconf) +{ + if (family >= NPROTO) + return -EINVAL; + gifconf_list[family] = gifconf; + return 0; +} +EXPORT_SYMBOL(register_gifconf); + +/* + * Perform a SIOCGIFCONF call. This structure will change + * size eventually, and there is nothing I can do about it. + * Thus we will need a 'compatibility mode'. + */ + +static int dev_ifconf(struct net *net, char __user *arg) +{ + struct ifconf ifc; + struct net_device *dev; + char __user *pos; + int len; + int total; + int i; + + /* + * Fetch the caller's info block. + */ + + if (copy_from_user(&ifc, arg, sizeof(struct ifconf))) + return -EFAULT; + + pos = ifc.ifc_buf; + len = ifc.ifc_len; + + /* + * Loop over the interfaces, and write an info block for each. + */ + + total = 0; + for_each_netdev(net, dev) { + for (i = 0; i < NPROTO; i++) { + if (gifconf_list[i]) { + int done; + if (!pos) + done = gifconf_list[i](dev, NULL, 0); + else + done = gifconf_list[i](dev, pos + total, + len - total); + if (done < 0) + return -EFAULT; + total += done; + } + } + } + + /* + * All done. Write the updated control block back to the caller. + */ + ifc.ifc_len = total; + + /* + * Both BSD and Solaris return 0 here, so we do too. + */ + return copy_to_user(arg, &ifc, sizeof(struct ifconf)) ? -EFAULT : 0; +} + +/* + * Perform the SIOCxIFxxx calls, inside rcu_read_lock() + */ +static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cmd) +{ + int err; + struct net_device *dev = dev_get_by_name_rcu(net, ifr->ifr_name); + + if (!dev) + return -ENODEV; + + switch (cmd) { + case SIOCGIFFLAGS: /* Get interface flags */ + ifr->ifr_flags = (short) dev_get_flags(dev); + return 0; + + case SIOCGIFMETRIC: /* Get the metric on the interface + (currently unused) */ + ifr->ifr_metric = 0; + return 0; + + case SIOCGIFMTU: /* Get the MTU of a device */ + ifr->ifr_mtu = dev->mtu; + return 0; + + case SIOCGIFHWADDR: + if (!dev->addr_len) + memset(ifr->ifr_hwaddr.sa_data, 0, sizeof ifr->ifr_hwaddr.sa_data); + else + memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr, + min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); + ifr->ifr_hwaddr.sa_family = dev->type; + return 0; + + case SIOCGIFSLAVE: + err = -EINVAL; + break; + + case SIOCGIFMAP: + ifr->ifr_map.mem_start = dev->mem_start; + ifr->ifr_map.mem_end = dev->mem_end; + ifr->ifr_map.base_addr = dev->base_addr; + ifr->ifr_map.irq = dev->irq; + ifr->ifr_map.dma = dev->dma; + ifr->ifr_map.port = dev->if_port; + return 0; + + case SIOCGIFINDEX: + ifr->ifr_ifindex = dev->ifindex; + return 0; + + case SIOCGIFTXQLEN: + ifr->ifr_qlen = dev->tx_queue_len; + return 0; + + default: + /* dev_ioctl() should ensure this case + * is never reached + */ + WARN_ON(1); + err = -ENOTTY; + break; + + } + return err; +} + +static int net_hwtstamp_validate(struct ifreq *ifr) +{ + struct hwtstamp_config cfg; + enum hwtstamp_tx_types tx_type; + enum hwtstamp_rx_filters rx_filter; + int tx_type_valid = 0; + int rx_filter_valid = 0; + + if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) + return -EFAULT; + + if (cfg.flags) /* reserved for future extensions */ + return -EINVAL; + + tx_type = cfg.tx_type; + rx_filter = cfg.rx_filter; + + switch (tx_type) { + case HWTSTAMP_TX_OFF: + case HWTSTAMP_TX_ON: + case HWTSTAMP_TX_ONESTEP_SYNC: + tx_type_valid = 1; + break; + } + + switch (rx_filter) { + case HWTSTAMP_FILTER_NONE: + case HWTSTAMP_FILTER_ALL: + case HWTSTAMP_FILTER_SOME: + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + rx_filter_valid = 1; + break; + } + + if (!tx_type_valid || !rx_filter_valid) + return -ERANGE; + + return 0; +} + +/* + * Perform the SIOCxIFxxx calls, inside rtnl_lock() + */ +static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd) +{ + int err; + struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name); + const struct net_device_ops *ops; + + if (!dev) + return -ENODEV; + + ops = dev->netdev_ops; + + switch (cmd) { + case SIOCSIFFLAGS: /* Set interface flags */ + return dev_change_flags(dev, ifr->ifr_flags); + + case SIOCSIFMETRIC: /* Set the metric on the interface + (currently unused) */ + return -EOPNOTSUPP; + + case SIOCSIFMTU: /* Set the MTU of a device */ + return dev_set_mtu(dev, ifr->ifr_mtu); + + case SIOCSIFHWADDR: + return dev_set_mac_address(dev, &ifr->ifr_hwaddr); + + case SIOCSIFHWBROADCAST: + if (ifr->ifr_hwaddr.sa_family != dev->type) + return -EINVAL; + memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data, + min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); + call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); + return 0; + + case SIOCSIFMAP: + if (ops->ndo_set_config) { + if (!netif_device_present(dev)) + return -ENODEV; + return ops->ndo_set_config(dev, &ifr->ifr_map); + } + return -EOPNOTSUPP; + + case SIOCADDMULTI: + if (!ops->ndo_set_rx_mode || + ifr->ifr_hwaddr.sa_family != AF_UNSPEC) + return -EINVAL; + if (!netif_device_present(dev)) + return -ENODEV; + return dev_mc_add_global(dev, ifr->ifr_hwaddr.sa_data); + + case SIOCDELMULTI: + if (!ops->ndo_set_rx_mode || + ifr->ifr_hwaddr.sa_family != AF_UNSPEC) + return -EINVAL; + if (!netif_device_present(dev)) + return -ENODEV; + return dev_mc_del_global(dev, ifr->ifr_hwaddr.sa_data); + + case SIOCSIFTXQLEN: + if (ifr->ifr_qlen < 0) + return -EINVAL; + dev->tx_queue_len = ifr->ifr_qlen; + return 0; + + case SIOCSIFNAME: + ifr->ifr_newname[IFNAMSIZ-1] = '\0'; + return dev_change_name(dev, ifr->ifr_newname); + + case SIOCSHWTSTAMP: + err = net_hwtstamp_validate(ifr); + if (err) + return err; + /* fall through */ + + /* + * Unknown or private ioctl + */ + default: + if ((cmd >= SIOCDEVPRIVATE && + cmd <= SIOCDEVPRIVATE + 15) || + cmd == SIOCBONDENSLAVE || + cmd == SIOCBONDRELEASE || + cmd == SIOCBONDSETHWADDR || + cmd == SIOCBONDSLAVEINFOQUERY || + cmd == SIOCBONDINFOQUERY || + cmd == SIOCBONDCHANGEACTIVE || + cmd == SIOCGMIIPHY || + cmd == SIOCGMIIREG || + cmd == SIOCSMIIREG || + cmd == SIOCBRADDIF || + cmd == SIOCBRDELIF || + cmd == SIOCSHWTSTAMP || + cmd == SIOCWANDEV) { + err = -EOPNOTSUPP; + if (ops->ndo_do_ioctl) { + if (netif_device_present(dev)) + err = ops->ndo_do_ioctl(dev, ifr, cmd); + else + err = -ENODEV; + } + } else + err = -EINVAL; + + } + return err; +} + +/** + * dev_load - load a network module + * @net: the applicable net namespace + * @name: name of interface + * + * If a network interface is not present and the process has suitable + * privileges this function loads the module. If module loading is not + * available in this kernel then it becomes a nop. + */ + +void dev_load(struct net *net, const char *name) +{ + struct net_device *dev; + int no_module; + + rcu_read_lock(); + dev = dev_get_by_name_rcu(net, name); + rcu_read_unlock(); + + no_module = !dev; + if (no_module && capable(CAP_NET_ADMIN)) + no_module = request_module("netdev-%s", name); + if (no_module && capable(CAP_SYS_MODULE)) { + if (!request_module("%s", name)) + pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n", + name); + } +} +EXPORT_SYMBOL(dev_load); + +/* + * This function handles all "interface"-type I/O control requests. The actual + * 'doing' part of this is dev_ifsioc above. + */ + +/** + * dev_ioctl - network device ioctl + * @net: the applicable net namespace + * @cmd: command to issue + * @arg: pointer to a struct ifreq in user space + * + * Issue ioctl functions to devices. This is normally called by the + * user space syscall interfaces but can sometimes be useful for + * other purposes. The return value is the return from the syscall if + * positive or a negative errno code on error. + */ + +int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg) +{ + struct ifreq ifr; + int ret; + char *colon; + + /* One special case: SIOCGIFCONF takes ifconf argument + and requires shared lock, because it sleeps writing + to user space. + */ + + if (cmd == SIOCGIFCONF) { + rtnl_lock(); + ret = dev_ifconf(net, (char __user *) arg); + rtnl_unlock(); + return ret; + } + if (cmd == SIOCGIFNAME) + return dev_ifname(net, (struct ifreq __user *)arg); + + if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) + return -EFAULT; + + ifr.ifr_name[IFNAMSIZ-1] = 0; + + colon = strchr(ifr.ifr_name, ':'); + if (colon) + *colon = 0; + + /* + * See which interface the caller is talking about. + */ + + switch (cmd) { + /* + * These ioctl calls: + * - can be done by all. + * - atomic and do not require locking. + * - return a value + */ + case SIOCGIFFLAGS: + case SIOCGIFMETRIC: + case SIOCGIFMTU: + case SIOCGIFHWADDR: + case SIOCGIFSLAVE: + case SIOCGIFMAP: + case SIOCGIFINDEX: + case SIOCGIFTXQLEN: + dev_load(net, ifr.ifr_name); + rcu_read_lock(); + ret = dev_ifsioc_locked(net, &ifr, cmd); + rcu_read_unlock(); + if (!ret) { + if (colon) + *colon = ':'; + if (copy_to_user(arg, &ifr, + sizeof(struct ifreq))) + ret = -EFAULT; + } + return ret; + + case SIOCETHTOOL: + dev_load(net, ifr.ifr_name); + rtnl_lock(); + ret = dev_ethtool(net, &ifr); + rtnl_unlock(); + if (!ret) { + if (colon) + *colon = ':'; + if (copy_to_user(arg, &ifr, + sizeof(struct ifreq))) + ret = -EFAULT; + } + return ret; + + /* + * These ioctl calls: + * - require superuser power. + * - require strict serialization. + * - return a value + */ + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSIFNAME: + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) + return -EPERM; + dev_load(net, ifr.ifr_name); + rtnl_lock(); + ret = dev_ifsioc(net, &ifr, cmd); + rtnl_unlock(); + if (!ret) { + if (colon) + *colon = ':'; + if (copy_to_user(arg, &ifr, + sizeof(struct ifreq))) + ret = -EFAULT; + } + return ret; + + /* + * These ioctl calls: + * - require superuser power. + * - require strict serialization. + * - do not return a value + */ + case SIOCSIFMAP: + case SIOCSIFTXQLEN: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + /* fall through */ + /* + * These ioctl calls: + * - require local superuser power. + * - require strict serialization. + * - do not return a value + */ + case SIOCSIFFLAGS: + case SIOCSIFMETRIC: + case SIOCSIFMTU: + case SIOCSIFHWADDR: + case SIOCSIFSLAVE: + case SIOCADDMULTI: + case SIOCDELMULTI: + case SIOCSIFHWBROADCAST: + case SIOCSMIIREG: + case SIOCBONDENSLAVE: + case SIOCBONDRELEASE: + case SIOCBONDSETHWADDR: + case SIOCBONDCHANGEACTIVE: + case SIOCBRADDIF: + case SIOCBRDELIF: + case SIOCSHWTSTAMP: + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) + return -EPERM; + /* fall through */ + case SIOCBONDSLAVEINFOQUERY: + case SIOCBONDINFOQUERY: + dev_load(net, ifr.ifr_name); + rtnl_lock(); + ret = dev_ifsioc(net, &ifr, cmd); + rtnl_unlock(); + return ret; + + case SIOCGIFMEM: + /* Get the per device memory space. We can add this but + * currently do not support it */ + case SIOCSIFMEM: + /* Set the per device memory buffer space. + * Not applicable in our case */ + case SIOCSIFLINK: + return -ENOTTY; + + /* + * Unknown or private ioctl. + */ + default: + if (cmd == SIOCWANDEV || + (cmd >= SIOCDEVPRIVATE && + cmd <= SIOCDEVPRIVATE + 15)) { + dev_load(net, ifr.ifr_name); + rtnl_lock(); + ret = dev_ifsioc(net, &ifr, cmd); + rtnl_unlock(); + if (!ret && copy_to_user(arg, &ifr, + sizeof(struct ifreq))) + ret = -EFAULT; + return ret; + } + /* Take care of Wireless Extensions */ + if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) + return wext_handle_ioctl(net, &ifr, cmd, arg); + return -ENOTTY; + } +} -- cgit v0.10.2 From dec34fb0f5b7873de45132a84a3af29e61084a6b Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Fri, 15 Feb 2013 22:28:25 +0000 Subject: net: fix a compile error when SOCK_REFCNT_DEBUG is enabled When SOCK_REFCNT_DEBUG is enabled, below build error is met: kernel/sysctl_binary.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here kernel/audit.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here make[1]: *** [kernel/built-in.o] Error 1 make: *** [kernel] Error 2 So we decide to make sk_refcnt_debug_release static to eliminate the error. Signed-off-by: Ying Xue Signed-off-by: David S. Miller diff --git a/include/net/sock.h b/include/net/sock.h index 182ca99..25afaa0 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1037,7 +1037,7 @@ static inline void sk_refcnt_debug_dec(struct sock *sk) sk->sk_prot->name, sk, atomic_read(&sk->sk_prot->socks)); } -inline void sk_refcnt_debug_release(const struct sock *sk) +static inline void sk_refcnt_debug_release(const struct sock *sk) { if (atomic_read(&sk->sk_refcnt) != 1) printk(KERN_DEBUG "Destruction of the %s socket %p delayed, refcnt=%d\n", -- cgit v0.10.2 From 0d4bfa297c3f7efb71367449ee44f9d3fb0f5871 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sat, 16 Feb 2013 07:38:15 +0000 Subject: ipv6: fix warning in xfrm6_mode_tunnel_input Should not use assignment in conditional: warning: suggest parentheses around assignment used as truth value [-Wparentheses] Problem introduced by: commit 14bbd6a565e1bcdc240d44687edb93f721cfdf99 Author: Pravin B Shelar Date: Thu Feb 14 09:44:49 2013 +0000 net: Add skb_unclone() helper function. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c index 93c41a8..9bf6a74 100644 --- a/net/ipv6/xfrm6_mode_tunnel.c +++ b/net/ipv6/xfrm6_mode_tunnel.c @@ -69,7 +69,8 @@ static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) goto out; - if (err = skb_unclone(skb, GFP_ATOMIC)) + err = skb_unclone(skb, GFP_ATOMIC); + if (err) goto out; if (x->props.flags & XFRM_STATE_DECAP_DSCP) -- cgit v0.10.2 From 9aac22deb11a3da4df5b868fc3d30b07185b0d71 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sat, 16 Feb 2013 07:40:29 +0000 Subject: ip: fix warning in xfrm4_mode_tunnel_input Same problem as IPv6 Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index 1162ace..fe5189e 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -142,7 +142,8 @@ static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) for_each_input_rcu(rcv_notify_handlers, handler) handler->handler(skb); - if (err = skb_unclone(skb, GFP_ATOMIC)) + err = skb_unclone(skb, GFP_ATOMIC); + if (err) goto out; if (x->props.flags & XFRM_STATE_DECAP_DSCP) -- cgit v0.10.2 From 885d29941435e16dea6a52e42bbb3c8b87676bd8 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 16 Feb 2013 11:10:38 +0000 Subject: bgmac: fix unaligned accesses to network headers Without this patch I get many unaligned access warnings per packet, this patches fixes them all. This should improve performance on some systems like mips. Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index d341090..3fd3288 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -301,7 +301,7 @@ static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", ring->start); } else { - new_skb = netdev_alloc_skb(bgmac->net_dev, len); + new_skb = netdev_alloc_skb_ip_align(bgmac->net_dev, len); if (new_skb) { skb_put(new_skb, len); skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, -- cgit v0.10.2 From 717ff727faa05958633e4e786f5b092c4bcf58e7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 16 Feb 2013 11:20:03 +0000 Subject: tg3: Remove define and single use of GET_CHIP_REV_ID It's the same value as tp->pci_chip_rev_id so use that instead. This makes all CHIPREV_ID_ tests the same. Signed-off-by: Joe Perches Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1b59876..f511e8b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -15761,12 +15761,10 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) &pci_state_reg); if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 && !tg3_flag(tp, PCIX_TARGET_HWBUG)) { - u32 chiprevid = GET_CHIP_REV_ID(tp->misc_host_ctrl); - - if (chiprevid == CHIPREV_ID_5701_A0 || - chiprevid == CHIPREV_ID_5701_B0 || - chiprevid == CHIPREV_ID_5701_B2 || - chiprevid == CHIPREV_ID_5701_B5) { + if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || + tp->pci_chip_rev_id == CHIPREV_ID_5701_B0 || + tp->pci_chip_rev_id == CHIPREV_ID_5701_B2 || + tp->pci_chip_rev_id == CHIPREV_ID_5701_B5) { void __iomem *sram_base; /* Write some dummy words into the SRAM status block diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index b676728..3e27f2e 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -120,9 +120,7 @@ #define MISC_HOST_CTRL_TAGGED_STATUS 0x00000200 #define MISC_HOST_CTRL_CHIPREV 0xffff0000 #define MISC_HOST_CTRL_CHIPREV_SHIFT 16 -#define GET_CHIP_REV_ID(MISC_HOST_CTRL) \ - (((MISC_HOST_CTRL) & MISC_HOST_CTRL_CHIPREV) >> \ - MISC_HOST_CTRL_CHIPREV_SHIFT) + #define CHIPREV_ID_5700_A0 0x7000 #define CHIPREV_ID_5700_A1 0x7001 #define CHIPREV_ID_5700_B0 0x7100 -- cgit v0.10.2 From 4153577a8d318ae02b3791341e10e78416de402f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 16 Feb 2013 11:20:04 +0000 Subject: tg3: Use different macros for pci_chip_rev_id accesses Upper case macros for various chip attributes are slightly difficult to read and are a bit out of characterto the other tg3_ attribute functions. Convert: GET_ASIC_REV(tp->pci_chip_rev_id) -> tg3_asic_rev(tp) GET_CHIP_REV(tp->pci_chip_rev_id) -> tg3_chip_rev(tp) Remove: GET_METAL_REV(tp->pci_chip_rev_id) -> tg3_metal_rev(tp) (unused) Add: tg3_chip_rev_id(tp) for tp->pci_chip_rev_id so access styles are similar to tg3_asic_rev and tg3_chip_rev. These macros are not converted to static inline functions because gcc (tested with 4.7.2) is currently unable to optimize the object code it produces the same way and code is otherwise larger. Signed-off-by: Joe Perches Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index f511e8b..fdb9b56 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -618,7 +618,7 @@ static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) { unsigned long flags; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 && + if (tg3_asic_rev(tp) == ASIC_REV_5906 && (off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) return; @@ -643,7 +643,7 @@ static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) { unsigned long flags; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 && + if (tg3_asic_rev(tp) == ASIC_REV_5906 && (off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) { *val = 0; return; @@ -671,7 +671,7 @@ static void tg3_ape_lock_init(struct tg3 *tp) int i; u32 regbase, bit; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) + if (tg3_asic_rev(tp) == ASIC_REV_5761) regbase = TG3_APE_LOCK_GRANT; else regbase = TG3_APE_PER_LOCK_GRANT; @@ -707,7 +707,7 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum) switch (locknum) { case TG3_APE_LOCK_GPIO: - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) + if (tg3_asic_rev(tp) == ASIC_REV_5761) return 0; case TG3_APE_LOCK_GRC: case TG3_APE_LOCK_MEM: @@ -726,7 +726,7 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum) return -EINVAL; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) { + if (tg3_asic_rev(tp) == ASIC_REV_5761) { req = TG3_APE_LOCK_REQ; gnt = TG3_APE_LOCK_GRANT; } else { @@ -764,7 +764,7 @@ static void tg3_ape_unlock(struct tg3 *tp, int locknum) switch (locknum) { case TG3_APE_LOCK_GPIO: - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) + if (tg3_asic_rev(tp) == ASIC_REV_5761) return; case TG3_APE_LOCK_GRC: case TG3_APE_LOCK_MEM: @@ -783,7 +783,7 @@ static void tg3_ape_unlock(struct tg3 *tp, int locknum) return; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) + if (tg3_asic_rev(tp) == ASIC_REV_5761) gnt = TG3_APE_LOCK_GRANT; else gnt = TG3_APE_PER_LOCK_GRANT; @@ -1479,7 +1479,7 @@ static void tg3_mdio_start(struct tg3 *tp) udelay(80); if (tg3_flag(tp, MDIOBUS_INITED) && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + tg3_asic_rev(tp) == ASIC_REV_5785) tg3_mdio_config_5785(tp); } @@ -1494,7 +1494,7 @@ static int tg3_mdio_init(struct tg3 *tp) tp->phy_addr = tp->pci_fn + 1; - if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) + if (tg3_chip_rev_id(tp) != CHIPREV_ID_5717_A0) is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES; else is_serdes = tr32(TG3_CPMU_PHY_STRAP) & @@ -1582,7 +1582,7 @@ static int tg3_mdio_init(struct tg3 *tp) tg3_flag_set(tp, MDIOBUS_INITED); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + if (tg3_asic_rev(tp) == ASIC_REV_5785) tg3_mdio_config_5785(tp); return 0; @@ -1804,7 +1804,7 @@ static int tg3_poll_fw(struct tg3 *tp) return 0; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { /* Wait up to 20ms for init done. */ for (i = 0; i < 200; i++) { if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE) @@ -1833,7 +1833,7 @@ static int tg3_poll_fw(struct tg3 *tp) netdev_info(tp->dev, "No firmware running\n"); } - if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0) { /* The 57765 A0 needs a little more * time to do some important work. */ @@ -1963,7 +1963,7 @@ static void tg3_adjust_link(struct net_device *dev) if (phydev->speed == SPEED_100 || phydev->speed == SPEED_10) mac_mode |= MAC_MODE_PORT_MODE_MII; else if (phydev->speed == SPEED_1000 || - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) + tg3_asic_rev(tp) != ASIC_REV_5785) mac_mode |= MAC_MODE_PORT_MODE_GMII; else mac_mode |= MAC_MODE_PORT_MODE_MII; @@ -1990,7 +1990,7 @@ static void tg3_adjust_link(struct net_device *dev) udelay(40); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) { + if (tg3_asic_rev(tp) == ASIC_REV_5785) { if (phydev->speed == SPEED_10) tw32(MAC_MI_STAT, MAC_MI_STAT_10MBPS_MODE | @@ -2182,7 +2182,7 @@ static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable) MII_TG3_MISC_SHDW_SCR5_DLPTLM | MII_TG3_MISC_SHDW_SCR5_SDTL | MII_TG3_MISC_SHDW_SCR5_C125OE; - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 || !enable) + if (tg3_asic_rev(tp) != ASIC_REV_5784 || !enable) reg |= MII_TG3_MISC_SHDW_SCR5_DLLAPD; tg3_writephy(tp, MII_TG3_MISC_SHDW, reg); @@ -2337,8 +2337,8 @@ static void tg3_phy_eee_enable(struct tg3 *tp) u32 val; if (tp->link_config.active_speed == SPEED_1000 && - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || + (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || tg3_flag(tp, 57765_CLASS)) && !tg3_phy_toggle_auxctl_smdsp(tp, true)) { val = MII_TG3_DSP_TAP26_ALNOKO | @@ -2542,7 +2542,7 @@ static int tg3_phy_reset(struct tg3 *tp) u32 val, cpmuctrl; int err; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { val = tr32(GRC_MISC_CFG); tw32_f(GRC_MISC_CFG, val & ~GRC_MISC_CFG_EPHY_IDDQ); udelay(40); @@ -2557,9 +2557,9 @@ static int tg3_phy_reset(struct tg3 *tp) tg3_link_report(tp); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + if (tg3_asic_rev(tp) == ASIC_REV_5703 || + tg3_asic_rev(tp) == ASIC_REV_5704 || + tg3_asic_rev(tp) == ASIC_REV_5705) { err = tg3_phy_reset_5703_4_5(tp); if (err) return err; @@ -2567,8 +2567,8 @@ static int tg3_phy_reset(struct tg3 *tp) } cpmuctrl = 0; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 && - GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) { + if (tg3_asic_rev(tp) == ASIC_REV_5784 && + tg3_chip_rev(tp) != CHIPREV_5784_AX) { cpmuctrl = tr32(TG3_CPMU_CTRL); if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY) tw32(TG3_CPMU_CTRL, @@ -2586,8 +2586,8 @@ static int tg3_phy_reset(struct tg3 *tp) tw32(TG3_CPMU_CTRL, cpmuctrl); } - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX || - GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) { + if (tg3_chip_rev(tp) == CHIPREV_5784_AX || + tg3_chip_rev(tp) == CHIPREV_5761_AX) { val = tr32(TG3_CPMU_LSPD_1000MB_CLK); if ((val & CPMU_LSPD_1000MB_MACCLK_MASK) == CPMU_LSPD_1000MB_MACCLK_12_5) { @@ -2665,12 +2665,12 @@ out: val | MII_TG3_EXT_CTRL_FIFO_ELASTIC); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { /* adjust output voltage */ tg3_writephy(tp, MII_TG3_FET_PTEST, 0x12); } - if (tp->pci_chip_rev_id == CHIPREV_ID_5762_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5762_A0) tg3_phydsp_write(tp, 0xffb, 0x4000); tg3_phy_toggle_automdix(tp, 1); @@ -2698,8 +2698,8 @@ static inline u32 tg3_set_function_status(struct tg3 *tp, u32 newstat) { u32 status, shift; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719) status = tg3_ape_read32(tp, TG3_APE_GPIO_MSG); else status = tr32(TG3_CPMU_DRV_STATUS); @@ -2708,8 +2708,8 @@ static inline u32 tg3_set_function_status(struct tg3 *tp, u32 newstat) status &= ~(TG3_GPIO_MSG_MASK << shift); status |= (newstat << shift); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719) tg3_ape_write32(tp, TG3_APE_GPIO_MSG, status); else tw32(TG3_CPMU_DRV_STATUS, status); @@ -2722,9 +2722,9 @@ static inline int tg3_pwrsrc_switch_to_vmain(struct tg3 *tp) if (!tg3_flag(tp, IS_NIC)) return 0; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { if (tg3_ape_lock(tp, TG3_APE_LOCK_GPIO)) return -EIO; @@ -2747,8 +2747,8 @@ static void tg3_pwrsrc_die_with_vmain(struct tg3 *tp) u32 grc_local_ctrl; if (!tg3_flag(tp, IS_NIC) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) + tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) return; grc_local_ctrl = tp->grc_local_ctrl | GRC_LCLCTRL_GPIO_OE1; @@ -2771,8 +2771,8 @@ static void tg3_pwrsrc_switch_to_vaux(struct tg3 *tp) if (!tg3_flag(tp, IS_NIC)) return; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) { tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | (GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 | @@ -2804,7 +2804,7 @@ static void tg3_pwrsrc_switch_to_vaux(struct tg3 *tp) u32 grc_local_ctrl = 0; /* Workaround to prevent overdrawing Amps. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + if (tg3_asic_rev(tp) == ASIC_REV_5714) { grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3; tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | grc_local_ctrl, @@ -2876,9 +2876,9 @@ static void tg3_frob_aux_power(struct tg3 *tp, bool include_wol) if (!tg3_flag(tp, IS_NIC) || tg3_flag(tp, 57765_CLASS)) return; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { tg3_frob_aux_power_5717(tp, include_wol ? tg3_flag(tp, WOL_ENABLE) != 0 : 0); return; @@ -2930,7 +2930,7 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) u32 val; if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { + if (tg3_asic_rev(tp) == ASIC_REV_5704) { u32 sg_dig_ctrl = tr32(SG_DIG_CTRL); u32 serdes_cfg = tr32(MAC_SERDES_CFG); @@ -2942,7 +2942,7 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) return; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { tg3_bmcr_reset(tp); val = tr32(GRC_MISC_CFG); tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ); @@ -2981,16 +2981,16 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) /* The PHY should not be powered down on some chips because * of bugs. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 && + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5704 || + (tg3_asic_rev(tp) == ASIC_REV_5780 && (tp->phy_flags & TG3_PHYFLG_MII_SERDES)) || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 && + (tg3_asic_rev(tp) == ASIC_REV_5717 && !tp->pci_fn)) return; - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX || - GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) { + if (tg3_chip_rev(tp) == CHIPREV_5784_AX || + tg3_chip_rev(tp) == CHIPREV_5761_AX) { val = tr32(TG3_CPMU_LSPD_1000MB_CLK); val &= ~CPMU_LSPD_1000MB_MACCLK_MASK; val |= CPMU_LSPD_1000MB_MACCLK_12_5; @@ -3373,7 +3373,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len, !tg3_flag(tp, 57765_PLUS)) tw32(NVRAM_ADDR, phy_addr); - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752 && + if (tg3_asic_rev(tp) != ASIC_REV_5752 && !tg3_flag(tp, 5755_PLUS) && (tp->nvram_jedecnum == JEDEC_ST) && (nvram_cmd & NVRAM_CMD_FIRST)) { @@ -3458,7 +3458,7 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset) BUG_ON(offset == TX_CPU_BASE && tg3_flag(tp, 5705_PLUS)); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { u32 val = tr32(GRC_VCPU_EXT_CTRL); tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_HALT_CPU); @@ -3636,7 +3636,7 @@ static int tg3_load_tso_firmware(struct tg3 *tp) info.fw_len = tp->fw->size - 12; info.fw_data = &fw_data[3]; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + if (tg3_asic_rev(tp) == ASIC_REV_5705) { cpu_base = RX_CPU_BASE; cpu_scratch_base = NIC_SRAM_MBUF_POOL_BASE5705; } else { @@ -3694,8 +3694,8 @@ static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1) tw32(MAC_ADDR_0_LOW + (i * 8), addr_low); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { + if (tg3_asic_rev(tp) == ASIC_REV_5703 || + tg3_asic_rev(tp) == ASIC_REV_5704) { for (i = 0; i < 12; i++) { tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high); tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low); @@ -3814,7 +3814,7 @@ static int tg3_power_down_prepare(struct tg3 *tp) tg3_setup_phy(tp, 0); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { u32 val; val = tr32(GRC_VCPU_EXT_CTRL); @@ -3856,8 +3856,7 @@ static int tg3_power_down_prepare(struct tg3 *tp) mac_mode = MAC_MODE_PORT_MODE_MII; mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == - ASIC_REV_5700) { + if (tg3_asic_rev(tp) == ASIC_REV_5700) { u32 speed = tg3_flag(tp, WOL_SPEED_100MB) ? SPEED_100 : SPEED_10; if (tg3_5700_link_polarity(tp, speed)) @@ -3890,8 +3889,8 @@ static int tg3_power_down_prepare(struct tg3 *tp) } if (!tg3_flag(tp, WOL_SPEED_100MB) && - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { + (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701)) { u32 base_val; base_val = tp->pci_clock_ctrl; @@ -3902,13 +3901,13 @@ static int tg3_power_down_prepare(struct tg3 *tp) CLOCK_CTRL_PWRDOWN_PLL133, 40); } else if (tg3_flag(tp, 5780_CLASS) || tg3_flag(tp, CPMU_PRESENT) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + tg3_asic_rev(tp) == ASIC_REV_5906) { /* do nothing */ } else if (!(tg3_flag(tp, 5750_PLUS) && tg3_flag(tp, ENABLE_ASF))) { u32 newbits1, newbits2; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) { newbits1 = (CLOCK_CTRL_RXCLK_DISABLE | CLOCK_CTRL_TXCLK_DISABLE | CLOCK_CTRL_ALTCLK); @@ -3930,8 +3929,8 @@ static int tg3_power_down_prepare(struct tg3 *tp) if (!tg3_flag(tp, 5705_PLUS)) { u32 newbits3; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) { newbits3 = (CLOCK_CTRL_RXCLK_DISABLE | CLOCK_CTRL_TXCLK_DISABLE | CLOCK_CTRL_44MHZ_CORE); @@ -3951,8 +3950,8 @@ static int tg3_power_down_prepare(struct tg3 *tp) /* Workaround for unstable PLL clock */ if ((!tg3_flag(tp, IS_SSB_CORE)) && - ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || - (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) { + ((tg3_chip_rev(tp) == CHIPREV_5750_AX) || + (tg3_chip_rev(tp) == CHIPREV_5750_BX))) { u32 val = tr32(0x7d00); val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1); @@ -4043,8 +4042,8 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) { new_adv = ethtool_adv_to_mii_ctrl1000_t(advertise); - if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B0) new_adv |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER; err = tg3_writephy(tp, MII_CTRL1000, new_adv); @@ -4073,7 +4072,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) if (err) val = 0; - switch (GET_ASIC_REV(tp->pci_chip_rev_id)) { + switch (tg3_asic_rev(tp)) { case ASIC_REV_5717: case ASIC_REV_57765: case ASIC_REV_57766: @@ -4221,8 +4220,8 @@ static bool tg3_phy_copper_an_config_ok(struct tg3 *tp, u32 *lcladv) return false; if (tgtadv && - (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)) { + (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B0)) { tgtadv |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER; tg3_ctrl &= (ADVERTISE_1000HALF | ADVERTISE_1000FULL | CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER); @@ -4306,9 +4305,9 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) /* Some third-party PHYs need to be reset on link going * down. */ - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) && + if ((tg3_asic_rev(tp) == ASIC_REV_5703 || + tg3_asic_rev(tp) == ASIC_REV_5704 || + tg3_asic_rev(tp) == ASIC_REV_5705) && tp->link_up) { tg3_readphy(tp, MII_BMSR, &bmsr); if (!tg3_readphy(tp, MII_BMSR, &bmsr) && @@ -4350,8 +4349,8 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) return err; } } - } else if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) { + } else if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B0) { /* 5701 {A0,B0} CRC bug workaround */ tg3_writephy(tp, 0x15, 0x0a75); tg3_writephy(tp, MII_TG3_MISC_SHDW, 0x8c68); @@ -4368,8 +4367,8 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) else if (!(tp->phy_flags & TG3_PHYFLG_IS_FET)) tg3_writephy(tp, MII_TG3_IMASK, ~0); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) { if (tp->led_ctrl == LED_CTRL_MODE_PHY_1) tg3_writephy(tp, MII_TG3_EXT_CTRL, MII_TG3_EXT_CTRL_LNK3_LED_MODE); @@ -4524,7 +4523,7 @@ relink: if (tp->link_config.active_duplex == DUPLEX_HALF) tp->mac_mode |= MAC_MODE_HALF_DUPLEX; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) { + if (tg3_asic_rev(tp) == ASIC_REV_5700) { if (current_link_up == 1 && tg3_5700_link_polarity(tp, tp->link_config.active_speed)) tp->mac_mode |= MAC_MODE_LINK_POLARITY; @@ -4536,7 +4535,7 @@ relink: * ??? send/receive packets... */ if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5411 && - tp->pci_chip_rev_id == CHIPREV_ID_5700_ALTIMA) { + tg3_chip_rev_id(tp) == CHIPREV_ID_5700_ALTIMA) { tp->mi_mode |= MAC_MI_MODE_AUTO_POLL; tw32_f(MAC_MI_MODE, tp->mi_mode); udelay(80); @@ -4555,7 +4554,7 @@ relink: } udelay(40); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 && + if (tg3_asic_rev(tp) == ASIC_REV_5700 && current_link_up == 1 && tp->link_config.active_speed == SPEED_1000 && (tg3_flag(tp, PCIX_MODE) || tg3_flag(tp, PCI_HIGH_SPEED))) { @@ -5010,8 +5009,8 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) port_a = 1; current_link_up = 0; - if (tp->pci_chip_rev_id != CHIPREV_ID_5704_A0 && - tp->pci_chip_rev_id != CHIPREV_ID_5704_A1) { + if (tg3_chip_rev_id(tp) != CHIPREV_ID_5704_A0 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5704_A1) { workaround = 1; if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID) port_a = 0; @@ -5340,7 +5339,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) err |= tg3_readphy(tp, MII_BMSR, &bmsr); err |= tg3_readphy(tp, MII_BMSR, &bmsr); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + if (tg3_asic_rev(tp) == ASIC_REV_5714) { if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP) bmsr |= BMSR_LSTATUS; else @@ -5409,8 +5408,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) bmcr = new_bmcr; err |= tg3_readphy(tp, MII_BMSR, &bmsr); err |= tg3_readphy(tp, MII_BMSR, &bmsr); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == - ASIC_REV_5714) { + if (tg3_asic_rev(tp) == ASIC_REV_5714) { if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP) bmsr |= BMSR_LSTATUS; else @@ -5545,7 +5543,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) else err = tg3_setup_copper_phy(tp, force_reset); - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) { + if (tg3_chip_rev(tp) == CHIPREV_5784_AX) { u32 scale; val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK; @@ -5563,8 +5561,8 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) | (6 << TX_LENGTHS_IPG_SHIFT); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) val |= tr32(MAC_TX_LENGTHS) & (TX_LENGTHS_JMB_FRM_LEN_MSK | TX_LENGTHS_CNT_DWN_VAL_MSK); @@ -7188,7 +7186,7 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi, dma_addr_t new_addr = 0; int ret = 0; - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) + if (tg3_asic_rev(tp) != ASIC_REV_5701) new_skb = skb_copy(skb, GFP_ATOMIC); else { int more_headroom = 4 - ((unsigned long)skb->data & 3); @@ -7362,7 +7360,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) } else if (tg3_flag(tp, HW_TSO_2)) mss |= hdr_len << 9; else if (tg3_flag(tp, HW_TSO_1) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + tg3_asic_rev(tp) == ASIC_REV_5705) { if (tcp_opt_len || iph->ihl > 5) { int tsflags; @@ -7518,7 +7516,7 @@ static void tg3_mac_loopback(struct tg3 *tp, bool enable) if (tg3_flag(tp, 5705_PLUS) || (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) + tg3_asic_rev(tp) == ASIC_REV_5700) tp->mac_mode &= ~MAC_MODE_LINK_POLARITY; } @@ -7577,7 +7575,7 @@ static int tg3_phy_lpbk_set(struct tg3 *tp, u32 speed, bool extlpbk) udelay(40); if ((tp->phy_flags & TG3_PHYFLG_IS_FET) && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) { + tg3_asic_rev(tp) == ASIC_REV_5785) { tg3_writephy(tp, MII_TG3_FET_PTEST, ptest | MII_TG3_FET_PTEST_FRC_TX_LINK | MII_TG3_FET_PTEST_FRC_TX_LOCK); @@ -7601,7 +7599,7 @@ static int tg3_phy_lpbk_set(struct tg3 *tp, u32 speed, bool extlpbk) else mac_mode |= MAC_MODE_PORT_MODE_MII; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) { + if (tg3_asic_rev(tp) == ASIC_REV_5700) { u32 masked_phy_id = tp->phy_id & TG3_PHY_ID_MASK; if (masked_phy_id == TG3_PHY_ID_BCM5401) @@ -8279,7 +8277,7 @@ static void tg3_restore_pci_state(struct tg3 *tp) /* Set MAX PCI retry to zero. */ val = (PCISTATE_ROM_ENABLE | PCISTATE_ROM_RETRY_ENABLE); - if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 && + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5704_A0 && tg3_flag(tp, PCIX_MODE)) val |= PCISTATE_RETRY_SAME_DMA; /* Allow reads and writes to the APE register and memory space. */ @@ -8351,7 +8349,7 @@ static int tg3_chip_reset(struct tg3 *tp) */ tg3_save_pci_state(tp); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || + if (tg3_asic_rev(tp) == ASIC_REV_5752 || tg3_flag(tp, 5755_PLUS)) tw32(GRC_FASTBOOT_PC, 0); @@ -8386,7 +8384,7 @@ static int tg3_chip_reset(struct tg3 *tp) for (i = 0; i < tp->irq_cnt; i++) synchronize_irq(tp->napi[i].irq_vec); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) { + if (tg3_asic_rev(tp) == ASIC_REV_57780) { val = tr32(TG3_PCIE_LNKCTL) & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN; tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS); } @@ -8396,19 +8394,19 @@ static int tg3_chip_reset(struct tg3 *tp) if (tg3_flag(tp, PCI_EXPRESS)) { /* Force PCIe 1.0a mode */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 && + if (tg3_asic_rev(tp) != ASIC_REV_5785 && !tg3_flag(tp, 57765_PLUS) && tr32(TG3_PCIE_PHY_TSTCTL) == (TG3_PCIE_PHY_TSTCTL_PCIE10 | TG3_PCIE_PHY_TSTCTL_PSCRAM)) tw32(TG3_PCIE_PHY_TSTCTL, TG3_PCIE_PHY_TSTCTL_PSCRAM); - if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) { + if (tg3_chip_rev_id(tp) != CHIPREV_ID_5750_A0) { tw32(GRC_MISC_CFG, (1 << 29)); val |= (1 << 29); } } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { tw32(VCPU_STATUS, tr32(VCPU_STATUS) | VCPU_STATUS_DRV_RESET); tw32(GRC_VCPU_EXT_CTRL, tr32(GRC_VCPU_EXT_CTRL) & ~GRC_VCPU_EXT_CTRL_HALT_CPU); @@ -8451,7 +8449,7 @@ static int tg3_chip_reset(struct tg3 *tp) if (tg3_flag(tp, PCI_EXPRESS) && pci_is_pcie(tp->pdev)) { u16 val16; - if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A0) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5750_A0) { int j; u32 cfg_val; @@ -8492,7 +8490,7 @@ static int tg3_chip_reset(struct tg3 *tp) val = tr32(MEMARB_MODE); tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE); - if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A3) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5750_A3) { tg3_stop_fw(tp); tw32(0x5000, 0x400); } @@ -8509,16 +8507,16 @@ static int tg3_chip_reset(struct tg3 *tp) tw32(GRC_MODE, tp->grc_mode); - if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A0) { val = tr32(0xc4); tw32(0xc4, val | (1 << 15)); } if ((tp->nic_sram_data_cfg & NIC_SRAM_DATA_CFG_MINI_PCI) != 0 && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + tg3_asic_rev(tp) == ASIC_REV_5705) { tp->pci_clock_ctrl |= CLOCK_CTRL_CLKRUN_OENABLE; - if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A0) tp->pci_clock_ctrl |= CLOCK_CTRL_FORCE_CLKRUN; tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl); } @@ -8544,15 +8542,15 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_mdio_start(tp); if (tg3_flag(tp, PCI_EXPRESS) && - tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5750_A0 && + tg3_asic_rev(tp) != ASIC_REV_5785 && !tg3_flag(tp, 57765_PLUS)) { val = tr32(0x7c00); tw32(0x7c00, val | (1 << 25)); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { + if (tg3_asic_rev(tp) == ASIC_REV_5720) { val = tr32(TG3_CPMU_CLCK_ORIDE); tw32(TG3_CPMU_CLCK_ORIDE, val & ~CPMU_CLCK_ORIDE_MAC_ORIDE_EN); } @@ -8764,7 +8762,7 @@ static void tg3_rings_reset(struct tg3 *tp) else if (tg3_flag(tp, 5717_PLUS)) limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 4; else if (tg3_flag(tp, 57765_CLASS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tg3_asic_rev(tp) == ASIC_REV_5762) limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2; else limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE; @@ -8780,8 +8778,8 @@ static void tg3_rings_reset(struct tg3 *tp) limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17; else if (!tg3_flag(tp, 5705_PLUS)) limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16; - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762 || + else if (tg3_asic_rev(tp) == ASIC_REV_5755 || + tg3_asic_rev(tp) == ASIC_REV_5762 || tg3_flag(tp, 57765_CLASS)) limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4; else @@ -8887,12 +8885,12 @@ static void tg3_setup_rxbd_thresholds(struct tg3 *tp) if (!tg3_flag(tp, 5750_PLUS) || tg3_flag(tp, 5780_CLASS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || + tg3_asic_rev(tp) == ASIC_REV_5750 || + tg3_asic_rev(tp) == ASIC_REV_5752 || tg3_flag(tp, 57765_PLUS)) bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5700; - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) + else if (tg3_asic_rev(tp) == ASIC_REV_5755 || + tg3_asic_rev(tp) == ASIC_REV_5787) bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5755; else bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5906; @@ -9074,7 +9072,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) { val = TG3_CPMU_EEE_LNKIDL_PCIE_NL0 | TG3_CPMU_EEE_LNKIDL_UART_IDL; - if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0) val |= TG3_CPMU_EEE_LNKIDL_APE_TX_MT; tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, val); @@ -9087,7 +9085,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) TG3_CPMU_EEEMD_LPI_IN_RX | TG3_CPMU_EEEMD_EEE_ENABLE; - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) + if (tg3_asic_rev(tp) != ASIC_REV_5717) val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN; if (tg3_flag(tp, ENABLE_APE)) @@ -9113,7 +9111,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tg3_write_sig_legacy(tp, RESET_KIND_INIT); - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) { + if (tg3_chip_rev(tp) == CHIPREV_5784_AX) { val = tr32(TG3_CPMU_CTRL); val &= ~(CPMU_CTRL_LINK_AWARE_MODE | CPMU_CTRL_LINK_IDLE_MODE); tw32(TG3_CPMU_CTRL, val); @@ -9134,7 +9132,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(TG3_CPMU_HST_ACC, val); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) { + if (tg3_asic_rev(tp) == ASIC_REV_57780) { val = tr32(PCIE_PWR_MGMT_THRESH) & ~PCIE_PWR_MGMT_L1_THRESH_MSK; val |= PCIE_PWR_MGMT_EXT_ASPM_TMR_EN | PCIE_PWR_MGMT_L1_THRESH_4MS; @@ -9164,7 +9162,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) } if (tg3_flag(tp, 57765_CLASS)) { - if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0) { u32 grc_mode = tr32(GRC_MODE); /* Access the lower 1K of PL PCIE block registers. */ @@ -9179,7 +9177,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(GRC_MODE, grc_mode); } - if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_57765_AX) { + if (tg3_chip_rev(tp) != CHIPREV_57765_AX) { u32 grc_mode; /* Fix transmit hangs */ @@ -9219,7 +9217,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl); } - if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 && + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5704_A0 && tg3_flag(tp, PCIX_MODE)) { val = tr32(TG3PCI_PCISTATE); val |= PCISTATE_RETRY_SAME_DMA; @@ -9237,7 +9235,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(TG3PCI_PCISTATE, val); } - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5704_BX) { + if (tg3_chip_rev(tp) == CHIPREV_5704_BX) { /* Enable some hw fixes. */ val = tr32(TG3PCI_MSI_DATA); val |= (1 << 26) | (1 << 28) | (1 << 29); @@ -9256,15 +9254,15 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (tg3_flag(tp, 57765_PLUS)) { val = tr32(TG3PCI_DMA_RW_CTRL) & ~DMA_RWCTRL_DIS_CACHE_ALIGNMENT; - if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0) val &= ~DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK; if (!tg3_flag(tp, 57765_CLASS) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + tg3_asic_rev(tp) != ASIC_REV_5717 && + tg3_asic_rev(tp) != ASIC_REV_5762) val |= DMA_RWCTRL_TAGGED_STAT_WA; tw32(TG3PCI_DMA_RW_CTRL, val | tp->dma_rwctrl); - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) { + } else if (tg3_asic_rev(tp) != ASIC_REV_5784 && + tg3_asic_rev(tp) != ASIC_REV_5761) { /* This value is determined during the probe time DMA * engine test, tg3_test_dma. */ @@ -9304,9 +9302,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) /* Initialize MBUF/DESC pool. */ if (tg3_flag(tp, 5750_PLUS)) { /* Do nothing. */ - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) { + } else if (tg3_asic_rev(tp) != ASIC_REV_5705) { tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) + if (tg3_asic_rev(tp) == ASIC_REV_5704) tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE64); else tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE96); @@ -9344,11 +9342,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tp->bufmgr_config.dma_high_water); val = BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) + if (tg3_asic_rev(tp) == ASIC_REV_5719) val |= BUFMGR_MODE_NO_TX_UNDERRUN; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5720_A0) + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5719_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5720_A0) val |= BUFMGR_MODE_MBLOW_ATTN_ENAB; tw32(BUFMGR_MODE, val); for (i = 0; i < 2000; i++) { @@ -9361,7 +9359,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) return -ENODEV; } - if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5906_A1) tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2); tg3_setup_rxbd_thresholds(tp); @@ -9399,7 +9397,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) /* Program the jumbo buffer descriptor ring control * blocks on those devices that have them. */ - if (tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 || + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5719_A0 || (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS))) { if (tg3_flag(tp, JUMBO_RING_ENABLE)) { @@ -9413,7 +9411,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) val | BDINFO_FLAGS_USE_EXT_RECV); if (!tg3_flag(tp, USE_JUMBO_BDFLAG) || tg3_flag(tp, 57765_CLASS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tg3_asic_rev(tp) == ASIC_REV_5762) tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR, NIC_SRAM_RX_JUMBO_BUFFER_DESC); } else { @@ -9455,8 +9453,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) (6 << TX_LENGTHS_IPG_SHIFT) | (32 << TX_LENGTHS_SLOT_TIME_SHIFT); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) val |= tr32(MAC_TX_LENGTHS) & (TX_LENGTHS_JMB_FRM_LEN_MSK | TX_LENGTHS_CNT_DWN_VAL_MSK); @@ -9476,20 +9474,20 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB | RDMAC_MODE_LNGREAD_ENAB); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) + if (tg3_asic_rev(tp) == ASIC_REV_5717) rdmac_mode |= RDMAC_MODE_MULT_DMA_RD_DIS; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) + if (tg3_asic_rev(tp) == ASIC_REV_5784 || + tg3_asic_rev(tp) == ASIC_REV_5785 || + tg3_asic_rev(tp) == ASIC_REV_57780) rdmac_mode |= RDMAC_MODE_BD_SBD_CRPT_ENAB | RDMAC_MODE_MBUF_RBD_CRPT_ENAB | RDMAC_MODE_MBUF_SBD_CRPT_ENAB; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 && - tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) { + if (tg3_asic_rev(tp) == ASIC_REV_5705 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5705_A0) { if (tg3_flag(tp, TSO_CAPABLE) && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + tg3_asic_rev(tp) == ASIC_REV_5705) { rdmac_mode |= RDMAC_MODE_FIFO_SIZE_128; } else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) && !tg3_flag(tp, IS_5788)) { @@ -9500,7 +9498,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (tg3_flag(tp, PCI_EXPRESS)) rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766) { + if (tg3_asic_rev(tp) == ASIC_REV_57766) { tp->dma_limit = 0; if (tp->dev->mtu <= ETH_DATA_LEN) { rdmac_mode |= RDMAC_MODE_JMB_2K_MMRR; @@ -9514,29 +9512,29 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) rdmac_mode |= RDMAC_MODE_IPV4_LSO_EN; if (tg3_flag(tp, 57765_PLUS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) + tg3_asic_rev(tp) == ASIC_REV_5785 || + tg3_asic_rev(tp) == ASIC_REV_57780) rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) rdmac_mode |= tr32(RDMAC_MODE) & RDMAC_MODE_H2BNC_VLAN_DET; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 || + if (tg3_asic_rev(tp) == ASIC_REV_5761 || + tg3_asic_rev(tp) == ASIC_REV_5784 || + tg3_asic_rev(tp) == ASIC_REV_5785 || + tg3_asic_rev(tp) == ASIC_REV_57780 || tg3_flag(tp, 57765_PLUS)) { u32 tgtreg; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5762) tgtreg = TG3_RDMA_RSRVCTRL_REG2; else tgtreg = TG3_RDMA_RSRVCTRL_REG; val = tr32(tgtreg); - if (tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5719_A0 || + tg3_asic_rev(tp) == ASIC_REV_5762) { val &= ~(TG3_RDMA_RSRVCTRL_TXMRGN_MASK | TG3_RDMA_RSRVCTRL_FIFO_LWM_MASK | TG3_RDMA_RSRVCTRL_FIFO_HWM_MASK); @@ -9547,12 +9545,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(tgtreg, val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) { u32 tgtreg; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5762) tgtreg = TG3_LSO_RD_DMA_CRPTEN_CTRL2; else tgtreg = TG3_LSO_RD_DMA_CRPTEN_CTRL; @@ -9635,7 +9633,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tp->mac_mode |= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN; if (!tg3_flag(tp, 5705_PLUS) && !(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) + tg3_asic_rev(tp) != ASIC_REV_5700) tp->mac_mode |= MAC_MODE_LINK_POLARITY; tw32_f(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR); udelay(40); @@ -9653,11 +9651,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT1 | GRC_LCLCTRL_GPIO_OUTPUT2; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) + if (tg3_asic_rev(tp) == ASIC_REV_5752) gpio_mask |= GRC_LCLCTRL_GPIO_OE3 | GRC_LCLCTRL_GPIO_OUTPUT3; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755) + if (tg3_asic_rev(tp) == ASIC_REV_5755) gpio_mask |= GRC_LCLCTRL_GPIO_UART_SEL; tp->grc_local_ctrl &= ~gpio_mask; @@ -9692,11 +9690,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) WDMAC_MODE_FIFOURUN_ENAB | WDMAC_MODE_FIFOOREAD_ENAB | WDMAC_MODE_LNGREAD_ENAB); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 && - tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) { + if (tg3_asic_rev(tp) == ASIC_REV_5705 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5705_A0) { if (tg3_flag(tp, TSO_CAPABLE) && - (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 || - tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) { + (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A1 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A2)) { /* nothing */ } else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) && !tg3_flag(tp, IS_5788)) { @@ -9708,7 +9706,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (tg3_flag(tp, 5755_PLUS)) val |= WDMAC_MODE_STATUS_TAG_FIX; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + if (tg3_asic_rev(tp) == ASIC_REV_5785) val |= WDMAC_MODE_BURST_ALL_DATA; tw32_f(WDMAC_MODE, val); @@ -9719,10 +9717,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD, &pcix_cmd); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) { + if (tg3_asic_rev(tp) == ASIC_REV_5703) { pcix_cmd &= ~PCI_X_CMD_MAX_READ; pcix_cmd |= PCI_X_CMD_READ_2K; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { + } else if (tg3_asic_rev(tp) == ASIC_REV_5704) { pcix_cmd &= ~(PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ); pcix_cmd |= PCI_X_CMD_READ_2K; } @@ -9733,7 +9731,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32_f(RDMAC_MODE, rdmac_mode); udelay(40); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) { + if (tg3_asic_rev(tp) == ASIC_REV_5719) { for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) { if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp)) break; @@ -9750,7 +9748,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (!tg3_flag(tp, 5705_PLUS)) tw32(MBFREE_MODE, MBFREE_MODE_ENABLE); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) + if (tg3_asic_rev(tp) == ASIC_REV_5761) tw32(SNDDATAC_MODE, SNDDATAC_MODE_ENABLE | SNDDATAC_MODE_CDELAY); else @@ -9773,7 +9771,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(SNDBDI_MODE, val); tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE); - if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0) { err = tg3_load_5701_a0_firmware_fix(tp); if (err) return err; @@ -9788,11 +9786,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tp->tx_mode = TX_MODE_ENABLE; if (tg3_flag(tp, 5755_PLUS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + tg3_asic_rev(tp) == ASIC_REV_5906) tp->tx_mode |= TX_MODE_MBUF_LOCKUP_FIX; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + if (tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) { val = TX_MODE_JMB_FRM_LEN | TX_MODE_CNT_DN_MODE; tp->tx_mode &= ~val; tp->tx_mode |= tr32(MAC_TX_MODE) & val; @@ -9843,8 +9841,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) udelay(10); if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) { - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) && - !(tp->phy_flags & TG3_PHYFLG_SERDES_PREEMPHASIS)) { + if ((tg3_asic_rev(tp) == ASIC_REV_5704) && + !(tp->phy_flags & TG3_PHYFLG_SERDES_PREEMPHASIS)) { /* Set drive transmission level to 1.2V */ /* only if the signal pre-emphasis bit is not set */ val = tr32(MAC_SERDES_CFG); @@ -9852,7 +9850,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) val |= 0x880; tw32(MAC_SERDES_CFG, val); } - if (tp->pci_chip_rev_id == CHIPREV_ID_5703_A1) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5703_A1) tw32(MAC_SERDES_CFG, 0x616000); } @@ -9865,14 +9863,14 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) val = 2; tw32_f(MAC_LOW_WMARK_MAX_RX_FRAME, val); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 && + if (tg3_asic_rev(tp) == ASIC_REV_5704 && (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) { /* Use hardware link auto-negotiation */ tg3_flag_set(tp, HW_AUTONEG); } if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + tg3_asic_rev(tp) == ASIC_REV_5714) { u32 tmp; tmp = tr32(SERDES_RX_CTRL); @@ -10126,9 +10124,9 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE); TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT); - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 && - tp->pci_chip_rev_id != CHIPREV_ID_5719_A0 && - tp->pci_chip_rev_id != CHIPREV_ID_5720_A0) { + if (tg3_asic_rev(tp) != ASIC_REV_5717 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5719_A0 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5720_A0) { TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT); } else { u32 val = tr32(HOSTCC_FLOW_ATTN); @@ -10176,7 +10174,7 @@ static void tg3_timer(unsigned long __opaque) spin_lock(&tp->lock); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || + if (tg3_asic_rev(tp) == ASIC_REV_5717 || tg3_flag(tp, 57765_CLASS)) tg3_chk_missed_msi(tp); @@ -10302,7 +10300,7 @@ restart_timer: static void tg3_timer_init(struct tg3 *tp) { if (tg3_flag(tp, TAGGED_STATUS) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 && + tg3_asic_rev(tp) != ASIC_REV_5717 && !tg3_flag(tp, 57765_CLASS)) tp->timer_offset = HZ; else @@ -10883,7 +10881,7 @@ static int tg3_open(struct net_device *dev) if (tp->fw_needed) { err = tg3_request_firmware(tp); - if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0) { if (err) return err; } else if (err) { @@ -10953,8 +10951,8 @@ static u64 tg3_calc_crc_errors(struct tg3 *tp) struct tg3_hw_stats *hw_stats = tp->hw_stats; if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) && - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { + (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701)) { u32 val; if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) { @@ -12479,11 +12477,11 @@ static int tg3_test_memory(struct tg3 *tp) if (tg3_flag(tp, 5717_PLUS)) mem_tbl = mem_tbl_5717; else if (tg3_flag(tp, 57765_CLASS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tg3_asic_rev(tp) == ASIC_REV_5762) mem_tbl = mem_tbl_57765; else if (tg3_flag(tp, 5755_PLUS)) mem_tbl = mem_tbl_5755; - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + else if (tg3_asic_rev(tp) == ASIC_REV_5906) mem_tbl = mem_tbl_5906; else if (tg3_flag(tp, 5705_PLUS)) mem_tbl = mem_tbl_5705; @@ -12595,7 +12593,7 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, bool tso_loopback) } else if (tg3_flag(tp, HW_TSO_2)) mss |= hdr_len << 9; else if (tg3_flag(tp, HW_TSO_1) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + tg3_asic_rev(tp) == ASIC_REV_5705) { mss |= (TG3_TSO_TCP_OPT_LEN << 9); } else { base_flags |= (TG3_TSO_TCP_OPT_LEN << 10); @@ -12781,7 +12779,7 @@ static int tg3_test_loopback(struct tg3 *tp, u64 *data, bool do_extlpbk) * errata. Also, the MAC loopback test is deprecated for * all newer ASIC revisions. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 && + if (tg3_asic_rev(tp) != ASIC_REV_5780 && !tg3_flag(tp, CPMU_PRESENT)) { tg3_mac_loopback(tp, true); @@ -13268,7 +13266,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) /* Reset PHY, otherwise the read DMA engine will be in a mode that * breaks all requests to 256 bytes. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766) + if (tg3_asic_rev(tp) == ASIC_REV_57766) reset_phy = 1; err = tg3_restart_hw(tp, reset_phy); @@ -13381,7 +13379,7 @@ static void tg3_get_nvram_info(struct tg3 *tp) tw32(NVRAM_CFG1, nvcfg1); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || + if (tg3_asic_rev(tp) == ASIC_REV_5750 || tg3_flag(tp, 5780_CLASS)) { switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) { case FLASH_VENDOR_ATMEL_FLASH_BUFFERED: @@ -13822,7 +13820,7 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) nvcfg1 = tr32(NVRAM_CFG1); nvmpinstrp = nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + if (tg3_asic_rev(tp) == ASIC_REV_5762) { if (!(nvcfg1 & NVRAM_CFG1_5762VENDOR_MASK)) { tg3_flag_set(tp, NO_NVRAM); return; @@ -13883,7 +13881,7 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) tp->nvram_size = TG3_NVRAM_SIZE_1MB; break; default: - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + if (tg3_asic_rev(tp) != ASIC_REV_5762) tp->nvram_size = TG3_NVRAM_SIZE_128KB; break; } @@ -13930,7 +13928,7 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) tp->nvram_size = TG3_NVRAM_SIZE_1MB; break; default: - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + if (tg3_asic_rev(tp) != ASIC_REV_5762) tp->nvram_size = TG3_NVRAM_SIZE_128KB; break; } @@ -13944,7 +13942,7 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp) if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528) tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) { + if (tg3_asic_rev(tp) == ASIC_REV_5762) { u32 val; if (tg3_nvram_read(tp, 0, &val)) @@ -13979,8 +13977,8 @@ static void tg3_nvram_init(struct tg3 *tp) tr32(GRC_LOCAL_CTRL) | GRC_LCLCTRL_AUTO_SEEPROM); udelay(100); - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) { + if (tg3_asic_rev(tp) != ASIC_REV_5700 && + tg3_asic_rev(tp) != ASIC_REV_5701) { tg3_flag_set(tp, NVRAM); if (tg3_nvram_lock(tp)) { @@ -13993,26 +13991,26 @@ static void tg3_nvram_init(struct tg3 *tp) tp->nvram_size = 0; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) + if (tg3_asic_rev(tp) == ASIC_REV_5752) tg3_get_5752_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755) + else if (tg3_asic_rev(tp) == ASIC_REV_5755) tg3_get_5755_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + else if (tg3_asic_rev(tp) == ASIC_REV_5787 || + tg3_asic_rev(tp) == ASIC_REV_5784 || + tg3_asic_rev(tp) == ASIC_REV_5785) tg3_get_5787_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) + else if (tg3_asic_rev(tp) == ASIC_REV_5761) tg3_get_5761_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + else if (tg3_asic_rev(tp) == ASIC_REV_5906) tg3_get_5906_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 || + else if (tg3_asic_rev(tp) == ASIC_REV_57780 || tg3_flag(tp, 57765_CLASS)) tg3_get_57780_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) + else if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719) tg3_get_5717_nvram_info(tp); - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + else if (tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) tg3_get_5720_nvram_info(tp); else tg3_get_nvram_info(tp); @@ -14125,7 +14123,7 @@ static void tg3_get_eeprom_hw_cfg(struct tg3 *tp) tg3_flag_set(tp, EEPROM_WRITE_PROT); tg3_flag_set(tp, WOL_CAP); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) { tg3_flag_clear(tp, EEPROM_WRITE_PROT); tg3_flag_set(tp, IS_NIC); @@ -14152,13 +14150,13 @@ static void tg3_get_eeprom_hw_cfg(struct tg3 *tp) tg3_read_mem(tp, NIC_SRAM_DATA_VER, &ver); ver >>= NIC_SRAM_DATA_VER_SHIFT; - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703 && + if (tg3_asic_rev(tp) != ASIC_REV_5700 && + tg3_asic_rev(tp) != ASIC_REV_5701 && + tg3_asic_rev(tp) != ASIC_REV_5703 && (ver > 0) && (ver < 0x100)) tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &cfg2); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + if (tg3_asic_rev(tp) == ASIC_REV_5785) tg3_read_mem(tp, NIC_SRAM_DATA_CFG_4, &cfg4); if ((nic_cfg & NIC_SRAM_DATA_CFG_PHY_TYPE_MASK) == @@ -14206,18 +14204,16 @@ static void tg3_get_eeprom_hw_cfg(struct tg3 *tp) /* Default to PHY_1_MODE if 0 (MAC_MODE) is * read on some older 5700/5701 bootcode. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == - ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == - ASIC_REV_5701) + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) tp->led_ctrl = LED_CTRL_MODE_PHY_1; break; case SHASTA_EXT_LED_SHARED: tp->led_ctrl = LED_CTRL_MODE_SHARED; - if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 && - tp->pci_chip_rev_id != CHIPREV_ID_5750_A1) + if (tg3_chip_rev_id(tp) != CHIPREV_ID_5750_A0 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5750_A1) tp->led_ctrl |= (LED_CTRL_MODE_PHY_1 | LED_CTRL_MODE_PHY_2); break; @@ -14228,19 +14224,19 @@ static void tg3_get_eeprom_hw_cfg(struct tg3 *tp) case SHASTA_EXT_LED_COMBO: tp->led_ctrl = LED_CTRL_MODE_COMBO; - if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) + if (tg3_chip_rev_id(tp) != CHIPREV_ID_5750_A0) tp->led_ctrl |= (LED_CTRL_MODE_PHY_1 | LED_CTRL_MODE_PHY_2); break; } - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) && + if ((tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) && tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL) tp->led_ctrl = LED_CTRL_MODE_PHY_2; - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) + if (tg3_chip_rev(tp) == CHIPREV_5784_AX) tp->led_ctrl = LED_CTRL_MODE_PHY_1; if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) { @@ -14284,13 +14280,13 @@ static void tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->phy_flags |= TG3_PHYFLG_SERDES_PREEMPHASIS; if ((tg3_flag(tp, 57765_PLUS) || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 && - GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) && + (tg3_asic_rev(tp) == ASIC_REV_5784 && + tg3_chip_rev(tp) != CHIPREV_5784_AX)) && (cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN)) tp->phy_flags |= TG3_PHYFLG_ENABLE_APD; if (tg3_flag(tp, PCI_EXPRESS) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 && + tg3_asic_rev(tp) != ASIC_REV_5785 && !tg3_flag(tp, 57765_PLUS)) { u32 cfg3; @@ -14513,13 +14509,13 @@ static int tg3_phy_probe(struct tg3 *tp) } if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) && - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762 || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 && - tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 && - tp->pci_chip_rev_id != CHIPREV_ID_57765_A0))) + (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762 || + (tg3_asic_rev(tp) == ASIC_REV_5717 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5717_A0) || + (tg3_asic_rev(tp) == ASIC_REV_57765 && + tg3_chip_rev_id(tp) != CHIPREV_ID_57765_A0))) tp->phy_flags |= TG3_PHYFLG_EEE_CAP; tg3_phy_init_link_config(tp); @@ -14629,7 +14625,7 @@ out_not_found: return; out_no_vpd: - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) { + if (tg3_asic_rev(tp) == ASIC_REV_5717) { if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717 || tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717_C) strcpy(tp->board_part_number, "BCM5717"); @@ -14637,7 +14633,7 @@ out_no_vpd: strcpy(tp->board_part_number, "BCM5718"); else goto nomatch; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) { + } else if (tg3_asic_rev(tp) == ASIC_REV_57780) { if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57780) strcpy(tp->board_part_number, "BCM57780"); else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57760) @@ -14648,7 +14644,7 @@ out_no_vpd: strcpy(tp->board_part_number, "BCM57788"); else goto nomatch; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) { + } else if (tg3_asic_rev(tp) == ASIC_REV_57765) { if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57761) strcpy(tp->board_part_number, "BCM57761"); else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57765) @@ -14663,7 +14659,7 @@ out_no_vpd: strcpy(tp->board_part_number, "BCM57795"); else goto nomatch; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766) { + } else if (tg3_asic_rev(tp) == ASIC_REV_57766) { if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57762) strcpy(tp->board_part_number, "BCM57762"); else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57766) @@ -14674,7 +14670,7 @@ out_no_vpd: strcpy(tp->board_part_number, "BCM57786"); else goto nomatch; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + } else if (tg3_asic_rev(tp) == ASIC_REV_5906) { strcpy(tp->board_part_number, "BCM95906"); } else { nomatch: @@ -14915,7 +14911,7 @@ static void tg3_read_otp_ver(struct tg3 *tp) { u32 val, val2; - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5762) + if (tg3_asic_rev(tp) != ASIC_REV_5762) return; if (!tg3_ape_otp_read(tp, OTP_ADDRESS_MAGIC0, &val) && @@ -15021,7 +15017,7 @@ static struct pci_dev *tg3_find_peer(struct tg3 *tp) static void tg3_detect_asic_rev(struct tg3 *tp, u32 misc_ctrl_reg) { tp->pci_chip_rev_id = misc_ctrl_reg >> MISC_HOST_CTRL_CHIPREV_SHIFT; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_USE_PROD_ID_REG) { + if (tg3_asic_rev(tp) == ASIC_REV_USE_PROD_ID_REG) { u32 reg; /* All devices that use the alternate @@ -15058,47 +15054,47 @@ static void tg3_detect_asic_rev(struct tg3 *tp, u32 misc_ctrl_reg) /* Wrong chip ID in 5752 A0. This code can be removed later * as A0 is not in production. */ - if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5752_A0_HW) tp->pci_chip_rev_id = CHIPREV_ID_5752_A0; - if (tp->pci_chip_rev_id == CHIPREV_ID_5717_C0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5717_C0) tp->pci_chip_rev_id = CHIPREV_ID_5720_A0; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) tg3_flag_set(tp, 5717_PLUS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766) + if (tg3_asic_rev(tp) == ASIC_REV_57765 || + tg3_asic_rev(tp) == ASIC_REV_57766) tg3_flag_set(tp, 57765_CLASS); if (tg3_flag(tp, 57765_CLASS) || tg3_flag(tp, 5717_PLUS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + tg3_asic_rev(tp) == ASIC_REV_5762) tg3_flag_set(tp, 57765_PLUS); /* Intentionally exclude ASIC_REV_5906 */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 || + if (tg3_asic_rev(tp) == ASIC_REV_5755 || + tg3_asic_rev(tp) == ASIC_REV_5787 || + tg3_asic_rev(tp) == ASIC_REV_5784 || + tg3_asic_rev(tp) == ASIC_REV_5761 || + tg3_asic_rev(tp) == ASIC_REV_5785 || + tg3_asic_rev(tp) == ASIC_REV_57780 || tg3_flag(tp, 57765_PLUS)) tg3_flag_set(tp, 5755_PLUS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) + if (tg3_asic_rev(tp) == ASIC_REV_5780 || + tg3_asic_rev(tp) == ASIC_REV_5714) tg3_flag_set(tp, 5780_CLASS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 || + if (tg3_asic_rev(tp) == ASIC_REV_5750 || + tg3_asic_rev(tp) == ASIC_REV_5752 || + tg3_asic_rev(tp) == ASIC_REV_5906 || tg3_flag(tp, 5755_PLUS) || tg3_flag(tp, 5780_CLASS)) tg3_flag_set(tp, 5750_PLUS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 || + if (tg3_asic_rev(tp) == ASIC_REV_5705 || tg3_flag(tp, 5750_PLUS)) tg3_flag_set(tp, 5705_PLUS); } @@ -15108,13 +15104,13 @@ static bool tg3_10_100_only_device(struct tg3 *tp, { u32 grc_misc_cfg = tr32(GRC_MISC_CFG) & GRC_MISC_CFG_BOARD_ID_MASK; - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 && - (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) || + if ((tg3_asic_rev(tp) == ASIC_REV_5703 && + (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) || (tp->phy_flags & TG3_PHYFLG_IS_FET)) return true; if (ent->driver_data & TG3_DRV_DATA_FLAG_10_100_ONLY) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) { + if (tg3_asic_rev(tp) == ASIC_REV_5705) { if (ent->driver_data & TG3_DRV_DATA_FLAG_5705_10_100) return true; } else { @@ -15175,8 +15171,8 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) * enable this workaround if the 5703 is on the secondary * bus of these ICH bridges. */ - if ((tp->pci_chip_rev_id == CHIPREV_ID_5703_A1) || - (tp->pci_chip_rev_id == CHIPREV_ID_5703_A2)) { + if ((tg3_chip_rev_id(tp) == CHIPREV_ID_5703_A1) || + (tg3_chip_rev_id(tp) == CHIPREV_ID_5703_A2)) { static struct tg3_dev_id { u32 vendor; u32 device; @@ -15216,7 +15212,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) } } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { + if (tg3_asic_rev(tp) == ASIC_REV_5701) { static struct tg3_dev_id { u32 vendor; u32 device; @@ -15276,29 +15272,29 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) } while (bridge); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) + if (tg3_asic_rev(tp) == ASIC_REV_5704 || + tg3_asic_rev(tp) == ASIC_REV_5714) tp->pdev_peer = tg3_find_peer(tp); /* Determine TSO capabilities */ - if (tp->pci_chip_rev_id == CHIPREV_ID_5719_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5719_A0) ; /* Do nothing. HW bug. */ else if (tg3_flag(tp, 57765_PLUS)) tg3_flag_set(tp, HW_TSO_3); else if (tg3_flag(tp, 5755_PLUS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + tg3_asic_rev(tp) == ASIC_REV_5906) tg3_flag_set(tp, HW_TSO_2); else if (tg3_flag(tp, 5750_PLUS)) { tg3_flag_set(tp, HW_TSO_1); tg3_flag_set(tp, TSO_BUG); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 && - tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2) + if (tg3_asic_rev(tp) == ASIC_REV_5750 && + tg3_chip_rev_id(tp) >= CHIPREV_ID_5750_C2) tg3_flag_clear(tp, TSO_BUG); - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && - tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) { + } else if (tg3_asic_rev(tp) != ASIC_REV_5700 && + tg3_asic_rev(tp) != ASIC_REV_5701 && + tg3_chip_rev_id(tp) != CHIPREV_ID_5705_A0) { tg3_flag_set(tp, TSO_BUG); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) + if (tg3_asic_rev(tp) == ASIC_REV_5705) tp->fw_needed = FIRMWARE_TG3TSO5; else tp->fw_needed = FIRMWARE_TG3TSO; @@ -15320,22 +15316,22 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tp->fw_needed = NULL; } - if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0) tp->fw_needed = FIRMWARE_TG3; tp->irq_max = 1; if (tg3_flag(tp, 5750_PLUS)) { tg3_flag_set(tp, SUPPORT_MSI); - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX || - GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 && - tp->pci_chip_rev_id <= CHIPREV_ID_5714_A2 && + if (tg3_chip_rev(tp) == CHIPREV_5750_AX || + tg3_chip_rev(tp) == CHIPREV_5750_BX || + (tg3_asic_rev(tp) == ASIC_REV_5714 && + tg3_chip_rev_id(tp) <= CHIPREV_ID_5714_A2 && tp->pdev_peer == tp->pdev)) tg3_flag_clear(tp, SUPPORT_MSI); if (tg3_flag(tp, 5755_PLUS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + tg3_asic_rev(tp) == ASIC_REV_5906) { tg3_flag_set(tp, 1SHOT_MSI); } @@ -15351,26 +15347,26 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tp->rxq_max = TG3_RSS_MAX_NUM_QS; tg3_rss_init_dflt_indir_tbl(tp, TG3_RSS_MAX_NUM_QS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) tp->txq_max = tp->irq_max - 1; } if (tg3_flag(tp, 5755_PLUS) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + tg3_asic_rev(tp) == ASIC_REV_5906) tg3_flag_set(tp, SHORT_DMA_BUG); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) + if (tg3_asic_rev(tp) == ASIC_REV_5719) tp->dma_limit = TG3_TX_BD_DMA_MAX_4K; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) tg3_flag_set(tp, LRG_PROD_RING_CAP); if (tg3_flag(tp, 57765_PLUS) && - tp->pci_chip_rev_id != CHIPREV_ID_5719_A0) + tg3_chip_rev_id(tp) != CHIPREV_ID_5719_A0) tg3_flag_set(tp, USE_JUMBO_BDFLAG); if (!tg3_flag(tp, 5705_PLUS) || @@ -15388,20 +15384,19 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) pcie_capability_read_word(tp->pdev, PCI_EXP_LNKCTL, &lnkctl); if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == - ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { tg3_flag_clear(tp, HW_TSO_2); tg3_flag_clear(tp, TSO_CAPABLE); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || - tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_57780_A1) + if (tg3_asic_rev(tp) == ASIC_REV_5784 || + tg3_asic_rev(tp) == ASIC_REV_5761 || + tg3_chip_rev_id(tp) == CHIPREV_ID_57780_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_57780_A1) tg3_flag_set(tp, CLKREQ_BUG); - } else if (tp->pci_chip_rev_id == CHIPREV_ID_5717_A0) { + } else if (tg3_chip_rev_id(tp) == CHIPREV_ID_5717_A0) { tg3_flag_set(tp, L1PLLPD_EN); } - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) { + } else if (tg3_asic_rev(tp) == ASIC_REV_5785) { /* BCM5785 devices are effectively PCIe devices, and should * follow PCIe codepaths, but do not have a PCIe capabilities * section. @@ -15434,7 +15429,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) &tp->pci_cacheline_sz); pci_read_config_byte(tp->pdev, PCI_LATENCY_TIMER, &tp->pci_lat_timer); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 && + if (tg3_asic_rev(tp) == ASIC_REV_5703 && tp->pci_lat_timer < 64) { tp->pci_lat_timer = 64; pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER, @@ -15444,7 +15439,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Important! -- It is critical that the PCI-X hw workaround * situation is decided before the first MMIO register access. */ - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX) { + if (tg3_chip_rev(tp) == CHIPREV_5700_BX) { /* 5700 BX chips need to have their TX producer index * mailboxes written twice to workaround a bug. */ @@ -15486,7 +15481,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tg3_flag_set(tp, PCI_32BIT); /* Chip-specific fixup from Broadcom driver */ - if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) && + if ((tg3_chip_rev_id(tp) == CHIPREV_ID_5704_A0) && (!(pci_state_reg & PCISTATE_RETRY_SAME_DMA))) { pci_state_reg |= PCISTATE_RETRY_SAME_DMA; pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg); @@ -15503,9 +15498,9 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Various workaround register access methods */ if (tg3_flag(tp, PCIX_TARGET_HWBUG)) tp->write32 = tg3_write_indirect_reg32; - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 || + else if (tg3_asic_rev(tp) == ASIC_REV_5701 || (tg3_flag(tp, PCI_EXPRESS) && - tp->pci_chip_rev_id == CHIPREV_ID_5750_A0)) { + tg3_chip_rev_id(tp) == CHIPREV_ID_5750_A0)) { /* * Back to back register writes can cause problems on these * chips, the workaround is to read back all reg writes @@ -15537,7 +15532,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) pci_cmd &= ~PCI_COMMAND_MEMORY; pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { tp->read32_mbox = tg3_read32_mbox_5906; tp->write32_mbox = tg3_write32_mbox_5906; tp->write32_tx_mbox = tg3_write32_mbox_5906; @@ -15546,8 +15541,8 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) if (tp->write32 == tg3_write_indirect_reg32 || (tg3_flag(tp, PCIX_MODE) && - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) + (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701))) tg3_flag_set(tp, SRAM_USE_CONFIG); /* The memory arbiter has to be enabled in order for SRAM accesses @@ -15559,7 +15554,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE); tp->pci_fn = PCI_FUNC(tp->pdev->devfn) & 3; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || + if (tg3_asic_rev(tp) == ASIC_REV_5704 || tg3_flag(tp, 5780_CLASS)) { if (tg3_flag(tp, PCIX_MODE)) { pci_read_config_dword(tp->pdev, @@ -15567,14 +15562,14 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) &val); tp->pci_fn = val & 0x7; } - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) { + } else if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val); if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) != NIC_SRAM_CPMUSTAT_SIG) val = tr32(TG3_CPMU_STATUS); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) + if (tg3_asic_rev(tp) == ASIC_REV_5717) tp->pci_fn = (val & TG3_CPMU_STATUS_FMSK_5717) ? 1 : 0; else tp->pci_fn = (val & TG3_CPMU_STATUS_FMSK_5719) >> @@ -15621,18 +15616,18 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) * It is also used as eeprom write protect on LOMs. */ tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || + if (tg3_asic_rev(tp) == ASIC_REV_5700 || tg3_flag(tp, EEPROM_WRITE_PROT)) tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 | GRC_LCLCTRL_GPIO_OUTPUT1); /* Unused GPIO3 must be driven as output on 5752 because there * are no pull-up resistors on unused GPIO pins. */ - else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) + else if (tg3_asic_rev(tp) == ASIC_REV_5752) tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 || + if (tg3_asic_rev(tp) == ASIC_REV_5755 || + tg3_asic_rev(tp) == ASIC_REV_57780 || tg3_flag(tp, 57765_CLASS)) tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL; @@ -15646,7 +15641,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) GRC_LCLCTRL_GPIO_OUTPUT0; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5762) tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & GRC_LCLCTRL_GPIO_UART_SEL; @@ -15660,42 +15655,42 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tg3_flag_set(tp, JUMBO_RING_ENABLE); /* Determine WakeOnLan speed to use. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B2) { + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B2) { tg3_flag_clear(tp, WOL_SPEED_100MB); } else { tg3_flag_set(tp, WOL_SPEED_100MB); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + if (tg3_asic_rev(tp) == ASIC_REV_5906) tp->phy_flags |= TG3_PHYFLG_IS_FET; /* A few boards don't want Ethernet@WireSpeed phy feature */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 && - (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) && - (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) || + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + (tg3_asic_rev(tp) == ASIC_REV_5705 && + (tg3_chip_rev_id(tp) != CHIPREV_ID_5705_A0) && + (tg3_chip_rev_id(tp) != CHIPREV_ID_5705_A1)) || (tp->phy_flags & TG3_PHYFLG_IS_FET) || (tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) tp->phy_flags |= TG3_PHYFLG_NO_ETH_WIRE_SPEED; - if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5703_AX || - GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5704_AX) + if (tg3_chip_rev(tp) == CHIPREV_5703_AX || + tg3_chip_rev(tp) == CHIPREV_5704_AX) tp->phy_flags |= TG3_PHYFLG_ADC_BUG; - if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5704_A0) tp->phy_flags |= TG3_PHYFLG_5704_A0_BUG; if (tg3_flag(tp, 5705_PLUS) && !(tp->phy_flags & TG3_PHYFLG_IS_FET) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780 && + tg3_asic_rev(tp) != ASIC_REV_5785 && + tg3_asic_rev(tp) != ASIC_REV_57780 && !tg3_flag(tp, 57765_PLUS)) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) { + if (tg3_asic_rev(tp) == ASIC_REV_5755 || + tg3_asic_rev(tp) == ASIC_REV_5787 || + tg3_asic_rev(tp) == ASIC_REV_5784 || + tg3_asic_rev(tp) == ASIC_REV_5761) { if (tp->pdev->device != PCI_DEVICE_ID_TIGON3_5756 && tp->pdev->device != PCI_DEVICE_ID_TIGON3_5722) tp->phy_flags |= TG3_PHYFLG_JITTER_BUG; @@ -15705,8 +15700,8 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tp->phy_flags |= TG3_PHYFLG_BER_BUG; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 && - GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) { + if (tg3_asic_rev(tp) == ASIC_REV_5784 && + tg3_chip_rev(tp) != CHIPREV_5784_AX) { tp->phy_otp = tg3_read_otp_phycfg(tp); if (tp->phy_otp == 0) tp->phy_otp = TG3_OTP_DEFAULT; @@ -15718,20 +15713,20 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tp->mi_mode = MAC_MI_MODE_BASE; tp->coalesce_mode = 0; - if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX && - GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX) + if (tg3_chip_rev(tp) != CHIPREV_5700_AX && + tg3_chip_rev(tp) != CHIPREV_5700_BX) tp->coalesce_mode |= HOSTCC_MODE_32BYTE; /* Set these bits to enable statistics workaround. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || - tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5720_A0) { + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5719_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5720_A0) { tp->coalesce_mode |= HOSTCC_MODE_ATTN; tp->grc_mode |= GRC_MODE_IRQ_ON_FLOW_ATTN; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) + if (tg3_asic_rev(tp) == ASIC_REV_5785 || + tg3_asic_rev(tp) == ASIC_REV_57780) tg3_flag_set(tp, USE_PHYLIB); err = tg3_mdio_init(tp); @@ -15740,8 +15735,8 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Initialize data/descriptor byte/word swapping. */ val = tr32(GRC_MODE); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) val &= (GRC_MODE_BYTE_SWAP_B2HRX_DATA | GRC_MODE_WORD_SWAP_B2HRX_DATA | GRC_MODE_B2HRX_ENABLE | @@ -15761,10 +15756,10 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) &pci_state_reg); if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 && !tg3_flag(tp, PCIX_TARGET_HWBUG)) { - if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B0 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B2 || - tp->pci_chip_rev_id == CHIPREV_ID_5701_B5) { + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B0 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B2 || + tg3_chip_rev_id(tp) == CHIPREV_ID_5701_B5) { void __iomem *sram_base; /* Write some dummy words into the SRAM status block @@ -15787,13 +15782,13 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) grc_misc_cfg = tr32(GRC_MISC_CFG); grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 && + if (tg3_asic_rev(tp) == ASIC_REV_5705 && (grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 || grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M)) tg3_flag_set(tp, IS_5788); if (!tg3_flag(tp, IS_5788) && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) + tg3_asic_rev(tp) != ASIC_REV_5700) tg3_flag_set(tp, TAGGED_STATUS); if (tg3_flag(tp, TAGGED_STATUS)) { tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD | @@ -15826,7 +15821,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) { tp->phy_flags &= ~TG3_PHYFLG_USE_MI_INTERRUPT; } else { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) + if (tg3_asic_rev(tp) == ASIC_REV_5700) tp->phy_flags |= TG3_PHYFLG_USE_MI_INTERRUPT; else tp->phy_flags &= ~TG3_PHYFLG_USE_MI_INTERRUPT; @@ -15836,7 +15831,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) * change bit implementation, so we must use the * status register in those cases. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) + if (tg3_asic_rev(tp) == ASIC_REV_5700) tg3_flag_set(tp, USE_LINKCHG_REG); else tg3_flag_clear(tp, USE_LINKCHG_REG); @@ -15846,7 +15841,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) * upon subsystem IDs. */ if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 && + tg3_asic_rev(tp) == ASIC_REV_5701 && !(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) { tp->phy_flags |= TG3_PHYFLG_USE_MI_INTERRUPT; tg3_flag_set(tp, USE_LINKCHG_REG); @@ -15860,7 +15855,7 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) tp->rx_offset = NET_SKB_PAD + NET_IP_ALIGN; tp->rx_copy_thresh = TG3_RX_COPY_THRESHOLD; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 && + if (tg3_asic_rev(tp) == ASIC_REV_5701 && tg3_flag(tp, PCIX_MODE)) { tp->rx_offset = NET_SKB_PAD; #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -15877,9 +15872,9 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Increment the rx prod index on the rx std ring by at most * 8 for these chips to workaround hw errata. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755) + if (tg3_asic_rev(tp) == ASIC_REV_5750 || + tg3_asic_rev(tp) == ASIC_REV_5752 || + tg3_asic_rev(tp) == ASIC_REV_5755) tp->rx_std_max_post = 8; if (tg3_flag(tp, ASPM_WORKAROUND)) @@ -15934,7 +15929,7 @@ static int tg3_get_device_address(struct tg3 *tp) } mac_offset = 0x7c; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || + if (tg3_asic_rev(tp) == ASIC_REV_5704 || tg3_flag(tp, 5780_CLASS)) { if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID) mac_offset = 0xcc; @@ -15947,7 +15942,7 @@ static int tg3_get_device_address(struct tg3 *tp) mac_offset = 0xcc; if (tp->pci_fn > 1) mac_offset += 0x18c; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + } else if (tg3_asic_rev(tp) == ASIC_REV_5906) mac_offset = 0x10; /* First try to get it from MAC address mailbox. */ @@ -16015,8 +16010,8 @@ static u32 tg3_calc_dma_bndry(struct tg3 *tp, u32 val) /* On 5703 and later chips, the boundary bits have no * effect. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && + if (tg3_asic_rev(tp) != ASIC_REV_5700 && + tg3_asic_rev(tp) != ASIC_REV_5701 && !tg3_flag(tp, PCI_EXPRESS)) goto out; @@ -16254,14 +16249,14 @@ static int tg3_test_dma(struct tg3 *tp) /* DMA read watermark not used on PCIE */ tp->dma_rwctrl |= 0x00180000; } else if (!tg3_flag(tp, PCIX_MODE)) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) + if (tg3_asic_rev(tp) == ASIC_REV_5705 || + tg3_asic_rev(tp) == ASIC_REV_5750) tp->dma_rwctrl |= 0x003f0000; else tp->dma_rwctrl |= 0x003f000f; } else { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { + if (tg3_asic_rev(tp) == ASIC_REV_5703 || + tg3_asic_rev(tp) == ASIC_REV_5704) { u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f); u32 read_water = 0x7; @@ -16270,22 +16265,22 @@ static int tg3_test_dma(struct tg3 *tp) * better performance. */ if (tg3_flag(tp, 40BIT_DMA_BUG) && - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) + tg3_asic_rev(tp) == ASIC_REV_5704) tp->dma_rwctrl |= 0x8000; else if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) + if (tg3_asic_rev(tp) == ASIC_REV_5703) read_water = 4; /* Set bit 23 to enable PCIX hw bug fix */ tp->dma_rwctrl |= (read_water << DMA_RWCTRL_READ_WATER_SHIFT) | (0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) | (1 << 23); - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + } else if (tg3_asic_rev(tp) == ASIC_REV_5780) { /* 5780 always in PCIX mode */ tp->dma_rwctrl |= 0x00144000; - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + } else if (tg3_asic_rev(tp) == ASIC_REV_5714) { /* 5714 always in PCIX mode */ tp->dma_rwctrl |= 0x00148000; } else { @@ -16295,12 +16290,12 @@ static int tg3_test_dma(struct tg3 *tp) if (tg3_flag(tp, ONE_DMA_AT_ONCE)) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) + if (tg3_asic_rev(tp) == ASIC_REV_5703 || + tg3_asic_rev(tp) == ASIC_REV_5704) tp->dma_rwctrl &= 0xfffffff0; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { + if (tg3_asic_rev(tp) == ASIC_REV_5700 || + tg3_asic_rev(tp) == ASIC_REV_5701) { /* Remove this if it causes problems for some boards. */ tp->dma_rwctrl |= DMA_RWCTRL_USE_MEM_READ_MULT; @@ -16324,8 +16319,8 @@ static int tg3_test_dma(struct tg3 *tp) tg3_switch_clocks(tp); #endif - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) + if (tg3_asic_rev(tp) != ASIC_REV_5700 && + tg3_asic_rev(tp) != ASIC_REV_5701) goto out; /* It is best to perform DMA test with maximum write burst size @@ -16444,7 +16439,7 @@ static void tg3_init_bufmgr_config(struct tg3 *tp) DEFAULT_MB_MACRX_LOW_WATER_5705; tp->bufmgr_config.mbuf_high_water = DEFAULT_MB_HIGH_WATER_5705; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tg3_asic_rev(tp) == ASIC_REV_5906) { tp->bufmgr_config.mbuf_mac_rx_low_water = DEFAULT_MB_MACRX_LOW_WATER_5906; tp->bufmgr_config.mbuf_high_water = @@ -16766,7 +16761,7 @@ static int tg3_init_one(struct pci_dev *pdev, /* 5700 B0 chips do not support checksumming correctly due * to hardware bugs. */ - if (tp->pci_chip_rev_id != CHIPREV_ID_5700_B0) { + if (tg3_chip_rev_id(tp) != CHIPREV_ID_5700_B0) { features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM; if (tg3_flag(tp, 5755_PLUS)) @@ -16786,11 +16781,11 @@ static int tg3_init_one(struct pci_dev *pdev, if (features & NETIF_F_IPV6_CSUM) features |= NETIF_F_TSO6; if (tg3_flag(tp, HW_TSO_3) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 && - GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) + tg3_asic_rev(tp) == ASIC_REV_5761 || + (tg3_asic_rev(tp) == ASIC_REV_5784 && + tg3_chip_rev(tp) != CHIPREV_5784_AX) || + tg3_asic_rev(tp) == ASIC_REV_5785 || + tg3_asic_rev(tp) == ASIC_REV_57780) features |= NETIF_F_TSO_ECN; } @@ -16802,14 +16797,14 @@ static int tg3_init_one(struct pci_dev *pdev, * MAC-LOOPBACK. Eventually this need to be enhanced to allow INT-PHY * loopback for the remaining devices. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 && + if (tg3_asic_rev(tp) != ASIC_REV_5780 && !tg3_flag(tp, CPMU_PRESENT)) /* Add the loopback capability */ features |= NETIF_F_LOOPBACK; dev->hw_features |= features; - if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 && + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A1 && !tg3_flag(tp, TSO_CAPABLE) && !(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) { tg3_flag_set(tp, MAX_RXPEND_64); @@ -16888,9 +16883,9 @@ static int tg3_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5762) + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720 || + tg3_asic_rev(tp) == ASIC_REV_5762) tg3_flag_set(tp, PTP_CAPABLE); if (tg3_flag(tp, 5717_PLUS)) { @@ -16910,7 +16905,7 @@ static int tg3_init_one(struct pci_dev *pdev, netdev_info(dev, "Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n", tp->board_part_number, - tp->pci_chip_rev_id, + tg3_chip_rev_id(tp), tg3_bus_string(tp, str), dev->dev_addr); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 3e27f2e..8d7d4c2 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -161,7 +161,7 @@ #define CHIPREV_ID_5719_A0 0x05719000 #define CHIPREV_ID_5720_A0 0x05720000 #define CHIPREV_ID_5762_A0 0x05762000 -#define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12) + #define ASIC_REV_5700 0x07 #define ASIC_REV_5701 0x00 #define ASIC_REV_5703 0x01 @@ -185,7 +185,6 @@ #define ASIC_REV_5720 0x5720 #define ASIC_REV_57766 0x57766 #define ASIC_REV_5762 0x5762 -#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8) #define CHIPREV_5700_AX 0x70 #define CHIPREV_5700_BX 0x71 #define CHIPREV_5700_CX 0x72 @@ -198,7 +197,6 @@ #define CHIPREV_5784_AX 0x57840 #define CHIPREV_5761_AX 0x57610 #define CHIPREV_57765_AX 0x577650 -#define GET_METAL_REV(CHIP_REV_ID) ((CHIP_REV_ID) & 0xff) #define METAL_REV_A0 0x00 #define METAL_REV_A1 0x01 #define METAL_REV_B0 0x00 @@ -3357,4 +3355,18 @@ struct tg3 { bool link_up; }; +/* Accessor macros for chip and asic attributes + * + * nb: Using static inlines equivalent to the accessor macros generates + * larger object code with gcc 4.7. + * Using statement expression macros to check tp with + * typecheck(struct tg3 *, tp) also creates larger objects. + */ +#define tg3_chip_rev_id(tp) \ + ((tp)->pci_chip_rev_id) +#define tg3_asic_rev(tp) \ + ((tp)->pci_chip_rev_id >> 12) +#define tg3_chip_rev(tp) \ + ((tp)->pci_chip_rev_id >> 8) + #endif /* !(_T3_H) */ -- cgit v0.10.2 From dca9ab9274ab1b01fa2a78d5b82e9d1ea8c22b39 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 15 Feb 2013 23:55:05 +0000 Subject: MAINTAINERS: Jiri Pirko email change Change email for team driver maintainership. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 35a56bc..b61e9b1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7536,7 +7536,7 @@ S: Maintained F: drivers/media/tuners/tea5767.* TEAM DRIVER -M: Jiri Pirko +M: Jiri Pirko L: netdev@vger.kernel.org S: Supported F: drivers/net/team/ -- cgit v0.10.2 From b18bf9733c4ca4db6fdb692895fabc9d934b7303 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 23:39:17 +0100 Subject: iwlwifi: mvm: fix merge error The iwlwifi-next tree removed IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC while the mac80211-next tree removed Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index e27eb97..6fb084f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -113,7 +113,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | IEEE80211_HW_AMPDU_AGGREGATION; -- cgit v0.10.2 From d2931bbd5471c35f55856e5a4f001160df9951dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 18:10:04 +0100 Subject: iwlwifi: mvm: program DTIM timings properly For the firmware to know when DTIM beacons arrive we have to program the DTIM time in TSF and system time in the MAC context. Since mac80211 now tracks the different times (on demand), this becomes easy. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index 0854dc3..c33bec8 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -585,10 +585,43 @@ static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm, struct iwl_mac_data_sta *ctxt_sta) { /* We need the dtim_period to set the MAC as associated */ - if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) { + u32 dtim_offs; + + /* + * The DTIM count counts down, so when it is N that means N + * more beacon intervals happen until the DTIM TBTT. Therefore + * add this to the current time. If that ends up being in the + * future, the firmware will handle it. + * + * Also note that the system_timestamp (which we get here as + * "sync_device_ts") and TSF timestamp aren't at exactly the + * same offset in the frame -- the TSF is at the first symbol + * of the TSF, the system timestamp is at signal acquisition + * time. This means there's an offset between them of at most + * a few hundred microseconds (24 * 8 bits + PLCP time gives + * 384us in the longest case), this is currently not relevant + * as the firmware wakes up around 2ms before the TBTT. + */ + dtim_offs = vif->bss_conf.sync_dtim_count * + vif->bss_conf.beacon_int; + /* convert TU to usecs */ + dtim_offs *= 1024; + + ctxt_sta->dtim_tsf = + cpu_to_le64(vif->bss_conf.sync_tsf + dtim_offs); + ctxt_sta->dtim_time = + cpu_to_le32(vif->bss_conf.sync_device_ts + dtim_offs); + + IWL_DEBUG_INFO(mvm, "DTIM TBTT is 0x%llx/0x%x, offset %d\n", + le64_to_cpu(ctxt_sta->dtim_tsf), + le32_to_cpu(ctxt_sta->dtim_time), + dtim_offs); + ctxt_sta->is_assoc = cpu_to_le32(1); - else + } else { ctxt_sta->is_assoc = cpu_to_le32(0); + } ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int); ctxt_sta->bi_reciprocal = diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 6fb084f..7679494 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -115,7 +115,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_WANT_MONITOR_VIF | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | - IEEE80211_HW_AMPDU_AGGREGATION; + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_TIMING_BEACON_ONLY; hw->queues = IWL_FIRST_AMPDU_QUEUE; hw->offchannel_tx_hw_queue = IWL_OFFCHANNEL_QUEUE; diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 3f3ce91..3f40ab0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -267,6 +267,7 @@ int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, /* rx_status carries information about the packet to mac80211 */ rx_status.mactime = le64_to_cpu(phy_info->timestamp); + rx_status.device_timestamp = le32_to_cpu(phy_info->system_timestamp); rx_status.band = (phy_info->phy_flags & cpu_to_le16(RX_RES_PHY_FLAGS_BAND_24)) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; -- cgit v0.10.2 From 9cc40712a082b7288d00c57e8652e3b248e2554d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 22:47:48 +0100 Subject: iwlwifi: mvm: fix GO powersave client manipulation All station commands must include a valid MAC ID, the ID 0 is randomly valid in some cases, but we must set the ID properly. Do that by passing the right station and using its mac_id_n_color. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7679494..e8264e1 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -857,7 +857,6 @@ iwl_mvm_mac_allow_buffered_frames(struct ieee80211_hw *hw, bool more_data) { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); - struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; /* TODO: how do we tell the fw to send frames for a specific TID */ @@ -865,8 +864,7 @@ iwl_mvm_mac_allow_buffered_frames(struct ieee80211_hw *hw, * The fw will send EOSP notification when the last frame will be * transmitted. */ - iwl_mvm_sta_modify_sleep_tx_count(mvm, mvmsta->sta_id, reason, - num_frames); + iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames); } static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw, @@ -890,7 +888,7 @@ static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw, case STA_NOTIFY_AWAKE: if (WARN_ON(mvmsta->sta_id == IWL_INVALID_STATION)) break; - iwl_mvm_sta_modify_ps_wake(mvm, mvmsta->sta_id); + iwl_mvm_sta_modify_ps_wake(mvm, sta); break; default: break; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index a1eb692..861a7f9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1188,13 +1188,16 @@ void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, rcu_read_unlock(); } -void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id) +void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, + struct ieee80211_sta *sta) { + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; struct iwl_mvm_add_sta_cmd cmd = { .add_modify = STA_MODE_MODIFY, - .sta_id = sta_id, + .sta_id = mvmsta->sta_id, .modify_mask = STA_MODIFY_SLEEPING_STA_TX_COUNT, .sleep_state_flags = cpu_to_le16(STA_SLEEP_STATE_AWAKE), + .mac_id_n_color = cpu_to_le32(mvmsta->mac_id_n_color), }; int ret; @@ -1208,18 +1211,21 @@ void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id) IWL_ERR(mvm, "Failed to send ADD_STA command (%d)\n", ret); } -void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, int sta_id, +void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt) { u16 sleep_state_flags = (reason == IEEE80211_FRAME_RELEASE_UAPSD) ? STA_SLEEP_STATE_UAPSD : STA_SLEEP_STATE_PS_POLL; + struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; struct iwl_mvm_add_sta_cmd cmd = { .add_modify = STA_MODE_MODIFY, - .sta_id = sta_id, + .sta_id = mvmsta->sta_id, .modify_mask = STA_MODIFY_SLEEPING_STA_TX_COUNT, .sleep_tx_count = cpu_to_le16(cnt), + .mac_id_n_color = cpu_to_le32(mvmsta->mac_id_n_color), /* * Same modify mask for sleep_tx_count and sleep_state_flags so * we must set the sleep_state_flags too. diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h index bdd7c5e..896f88a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -362,8 +362,10 @@ int iwl_mvm_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_int_sta *bsta); int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *bsta); void iwl_mvm_sta_drained_wk(struct work_struct *wk); -void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id); -void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, int sta_id, +void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, + struct ieee80211_sta *sta); +void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt); int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, -- cgit v0.10.2 From 93630dc3ef897975a542bb52bbed3969e647276e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 23:54:10 +0100 Subject: iwlwifi: mvm: add debug statement to time event add This is helpful for debugging the time event warning, but also in general to see what's going on. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index c09b71f..e025b58 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -265,6 +265,9 @@ static int iwl_mvm_time_event_send_add(struct iwl_mvm *mvm, lockdep_assert_held(&mvm->mutex); + IWL_DEBUG_TE(mvm, "Add new TE, duration %d TU\n", + le32_to_cpu(te_cmd->duration)); + spin_lock_bh(&mvm->time_event_lock); if (WARN_ON(te_data->id != TE_MAX)) { spin_unlock_bh(&mvm->time_event_lock); -- cgit v0.10.2 From e372282241316209b44ee6a7c40b9b465744fc0d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 16 Feb 2013 00:11:34 +0100 Subject: iwlwifi: mvm: fix time event command handling race Occasionally, we would run into this warning: iwlwifi 0000:02:00.0: U iwl_mvm_protect_session extend 0x2601: only 200 ms left iwlwifi 0000:02:00.0: U iwl_mvm_remove_time_event Removing TE 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (#29), seq: 0x0925, 60 bytes at 37[5]:9 iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (#29), seq: 0x0926, 60 bytes at 38[6]:9 iwlwifi 0000:02:00.0: U iwl_mvm_time_event_response TIME_EVENT_CMD response - UID = 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_mvm_rx_time_event_notif Time event notification - UID = 0x2701 action 1 wlan0: associate with 00:0a:b8:55:a8:30 (try 2/3) ------------[ cut here ]------------ WARNING: at drivers/net/wireless/iwlwifi/mvm/time-event.c:269 iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm]() Modules linked in: [...] Call Trace: [] warn_slowpath_common+0x72/0xa0 [] warn_slowpath_null+0x22/0x30 [] iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm] [] iwl_mvm_protect_session+0xcd/0x1c0 [iwlmvm] [] iwl_mvm_mac_mgd_prepare_tx+0x67/0xa0 [iwlmvm] [] ieee80211_sta_work+0x8f0/0x1070 [mac80211] The reason is a problem with asynchronous vs. synchronous commands, what happens here is the following: * TE 0x2601 is removed, the TIME_EVENT_CMD for that is async * a new TE (will be 0x2701) is created, the TIME_EVENT_CMD for that is sync and also uses a notification wait for the response (to avoid another race condition) * the response for the TE 0x2601 removal comes from the firmware, and is handled by the notification wait handler that's really waiting for the second response, but can't tell the difference, we therefore see the message "TIME_EVENT_CMD response - UID = 0x2601" instead of "TIME_EVENT_CMD response - UID = 0x2701". Fix this issue by making the TE removal synchronous as well, this means that we wait for the response to that command first, before there's any chance of sending a new one. Also, to detect such issues more easily in the future, add a warning to the notification handler that detects them. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index e025b58..e437e02 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -248,6 +248,11 @@ static bool iwl_mvm_time_event_response(struct iwl_notif_wait_data *notif_wait, } resp = (void *)pkt->data; + + /* we should never get a response to another TIME_EVENT_CMD here */ + if (WARN_ON_ONCE(le32_to_cpu(resp->id) != te_data->id)) + return false; + te_data->uid = le32_to_cpu(resp->unique_id); IWL_DEBUG_TE(mvm, "TIME_EVENT_CMD response - UID = 0x%x\n", te_data->uid); @@ -416,7 +421,7 @@ void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); IWL_DEBUG_TE(mvm, "Removing TE 0x%x\n", le32_to_cpu(time_cmd.id)); - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_ASYNC, + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, sizeof(time_cmd), &time_cmd); if (WARN_ON(ret)) return; -- cgit v0.10.2 From d91b06d214de610807456839d543c1c2e622e9b5 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Mon, 11 Feb 2013 08:50:45 +0200 Subject: iwlwifi: mvm: Set the scan type according to the vif type The FW can differentiate between scans, according to the interface type on which the scan was issues. Supply the interfaces type information to the FW. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 406c53a..9b21b92 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -292,7 +292,12 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req); cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP | MAC_FILTER_IN_BEACON); - cmd->type = SCAN_TYPE_FORCED; + + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) + cmd->type = cpu_to_le32(SCAN_TYPE_DISCOVERY_FORCED); + else + cmd->type = cpu_to_le32(SCAN_TYPE_FORCED); + cmd->repeats = cpu_to_le32(1); /* -- cgit v0.10.2 From 1e849c93ee5bd07b2ce84d1c3cbcd5d06cb9d2a5 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Wed, 13 Feb 2013 12:26:39 +0200 Subject: iwlwifi: mvm: Fix resource allocation for P2P Device The time event data structures are required also for P2P Device interface. Signed-off-by: Ilan Peer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index c33bec8..3f937b2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -286,6 +286,9 @@ static int iwl_mvm_mac_ctxt_allocate_resources(struct iwl_mvm *mvm, mvmvif->color = 0; + INIT_LIST_HEAD(&mvmvif->time_event_data.list); + mvmvif->time_event_data.id = TE_MAX; + /* No need to allocate data queues to P2P Device MAC.*/ if (vif->type == NL80211_IFTYPE_P2P_DEVICE) { for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) @@ -328,9 +331,6 @@ static int iwl_mvm_mac_ctxt_allocate_resources(struct iwl_mvm *mvm, mvmvif->bcast_sta.sta_id = IWL_MVM_STATION_COUNT; mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT; - INIT_LIST_HEAD(&mvmvif->time_event_data.list); - mvmvif->time_event_data.id = TE_MAX; - return 0; exit_fail: -- cgit v0.10.2 From ec8b6885b543ceeb47fdb0c0e6981bb7420ab59e Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Wed, 13 Feb 2013 13:27:18 +0200 Subject: iwlwifi: mvm: Reserve MAC id 0 for managed interfaces Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index 3f937b2..341dbc0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -245,6 +245,10 @@ static int iwl_mvm_mac_ctxt_allocate_resources(struct iwl_mvm *mvm, * that we should share it with another interface. */ + /* Currently, MAC ID 0 should be used only for the managed vif */ + if (vif->type != NL80211_IFTYPE_STATION || vif->p2p) + __clear_bit(0, data.available_mac_ids); + ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_RESUME_ALL, iwl_mvm_mac_iface_iterator, &data); -- cgit v0.10.2 From 3104ba151eb9df1bc14878cfd2e4356bf537d18c Mon Sep 17 00:00:00 2001 From: Eytan Lifshitz Date: Fri, 15 Feb 2013 16:31:45 +0200 Subject: iwlwifi: dvm: fix delayed enter to CT-kill bug Theoretically, the card may not enter CTKILL: In case the timer that iwl_prepare_ct_kill_task is setting, will expire before tt->state revert to its previous state. Signed-off-by: Eytan Lifshitz Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index 67e2e13..03f9bc0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -471,8 +471,8 @@ static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force) set_bit(STATUS_CT_KILL, &priv->status); iwl_perform_ct_kill_task(priv, true); } else { - iwl_prepare_ct_kill_task(priv); tt->state = old_state; + iwl_prepare_ct_kill_task(priv); } } else if (old_state == IWL_TI_CT_KILL && tt->state != IWL_TI_CT_KILL) { -- cgit v0.10.2 From cfe418287c61f4c4a3ccb94e8a286434d64e0236 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 14 Feb 2013 11:33:54 +0200 Subject: iwlwifi: dvm: improve (again) the prints in reclaim path I removed a bit too much info last time. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h index 02c9ebb..84e2c0f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -1403,6 +1403,7 @@ enum { #define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */ #define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */ +#define AGG_TX_TRY_POS 12 #define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \ diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index d1dccb3..6aec2df 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -908,6 +908,12 @@ static void iwlagn_count_agg_tx_err_status(struct iwl_priv *priv, u16 status) } } +static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp) +{ + return le32_to_cpup((__le32 *)&tx_resp->status + + tx_resp->frame_count) & MAX_SN; +} + static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, struct iwlagn_tx_resp *tx_resp) { @@ -942,9 +948,15 @@ static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, if (tx_resp->frame_count == 1) return; + IWL_DEBUG_TX_REPLY(priv, "TXQ %d initial_rate 0x%x ssn %d frm_cnt %d\n", + agg->txq_id, + le32_to_cpu(tx_resp->rate_n_flags), + iwlagn_get_scd_ssn(tx_resp), tx_resp->frame_count); + /* Construct bit-map of pending frames within Tx window */ for (i = 0; i < tx_resp->frame_count; i++) { u16 fstatus = le16_to_cpu(frame_status[i].status); + u8 retry_cnt = (fstatus & AGG_TX_TRY_MSK) >> AGG_TX_TRY_POS; if (status & AGG_TX_STATUS_MSK) iwlagn_count_agg_tx_err_status(priv, fstatus); @@ -952,6 +964,14 @@ static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, if (status & (AGG_TX_STATE_FEW_BYTES_MSK | AGG_TX_STATE_ABORT_MSK)) continue; + + if (status & AGG_TX_STATUS_MSK || retry_cnt > 1) + IWL_DEBUG_TX_REPLY(priv, + "%d: status %s (0x%04x), try-count (0x%01x)\n", + i, + iwl_get_agg_tx_fail_reason(fstatus), + fstatus & AGG_TX_STATUS_MSK, + retry_cnt); } } @@ -982,12 +1002,6 @@ const char *iwl_get_agg_tx_fail_reason(u16 status) } #endif /* CONFIG_IWLWIFI_DEBUG */ -static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp) -{ - return le32_to_cpup((__le32 *)&tx_resp->status + - tx_resp->frame_count) & MAX_SN; -} - static void iwlagn_count_tx_err_status(struct iwl_priv *priv, u16 status) { status &= TX_STATUS_MSK; @@ -1119,8 +1133,14 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, spin_lock_bh(&priv->sta_lock); - if (is_agg) + if (is_agg) { + WARN_ON_ONCE(sta_id >= IWLAGN_STATION_COUNT || + tid >= IWL_MAX_TID_COUNT); + if (txq_id != priv->tid_data[sta_id][tid].agg.txq_id) + IWL_ERR(priv, "txq_id mismatch: %d %d\n", txq_id, + priv->tid_data[sta_id][tid].agg.txq_id); iwl_rx_reply_tx_agg(priv, tx_resp); + } __skb_queue_head_init(&skbs); @@ -1224,16 +1244,17 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, */ if (is_offchannel_skb && freed != 1) IWL_ERR(priv, "OFFCHANNEL SKB freed %d\n", freed); - } - IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x)\n", txq_id, - iwl_get_tx_fail_reason(status), status); + IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x)\n", txq_id, + iwl_get_tx_fail_reason(status), status); - IWL_DEBUG_TX_REPLY(priv, - "\t\t\t\tinitial_rate 0x%x retries %d, idx=%d ssn=%d seq_ctl=0x%x\n", - le32_to_cpu(tx_resp->rate_n_flags), - tx_resp->failure_frame, SEQ_TO_INDEX(sequence), ssn, - le16_to_cpu(tx_resp->seq_ctl)); + IWL_DEBUG_TX_REPLY(priv, + "\t\t\t\tinitial_rate 0x%x retries %d, idx=%d ssn=%d seq_ctl=0x%x\n", + le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame, + SEQ_TO_INDEX(sequence), ssn, + le16_to_cpu(tx_resp->seq_ctl)); + } iwl_check_abort_status(priv, tx_resp->frame_count, status); spin_unlock_bh(&priv->sta_lock); -- cgit v0.10.2 From 510a1e7249298f6bbd049e1ec98041ddf5ef6452 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Sun, 17 Feb 2013 22:19:20 +0000 Subject: drivers: net: davinci_cpdma: acknowledge interrupt properly CPDMA interrupts are not properly acknowledged which leads to interrupt storm, only cpdma interrupt 0 is acknowledged in Davinci CPDMA driver. Changed cpdma_ctlr_eoi api to acknowledge 1 and 2 interrupts which are used for rx and tx respectively. Reported-by: Pantelis Antoniou Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 4ceed6e..7e93df6 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -510,19 +510,21 @@ static int cpsw_poll(struct napi_struct *napi, int budget) int num_tx, num_rx; num_tx = cpdma_chan_process(priv->txch, 128); - num_rx = cpdma_chan_process(priv->rxch, budget); - - if (num_rx || num_tx) - cpsw_dbg(priv, intr, "poll %d rx, %d tx pkts\n", - num_rx, num_tx); + if (num_tx) + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); + num_rx = cpdma_chan_process(priv->rxch, budget); if (num_rx < budget) { napi_complete(napi); cpsw_intr_enable(priv); - cpdma_ctlr_eoi(priv->dma); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); cpsw_enable_irq(priv); } + if (num_rx || num_tx) + cpsw_dbg(priv, intr, "poll %d rx, %d tx pkts\n", + num_rx, num_tx); + return num_rx; } @@ -835,7 +837,8 @@ static int cpsw_ndo_open(struct net_device *ndev) cpdma_ctlr_start(priv->dma); cpsw_intr_enable(priv); napi_enable(&priv->napi); - cpdma_ctlr_eoi(priv->dma); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); if (priv->data.dual_emac) priv->slaves[priv->emac_port].open_stat = true; @@ -1075,7 +1078,9 @@ static void cpsw_ndo_tx_timeout(struct net_device *ndev) cpdma_chan_start(priv->txch); cpdma_ctlr_int_ctrl(priv->dma, true); cpsw_intr_enable(priv); - cpdma_ctlr_eoi(priv->dma); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); + } static struct net_device_stats *cpsw_ndo_get_stats(struct net_device *ndev) @@ -1094,7 +1099,9 @@ static void cpsw_ndo_poll_controller(struct net_device *ndev) cpsw_interrupt(ndev->irq, priv); cpdma_ctlr_int_ctrl(priv->dma, true); cpsw_intr_enable(priv); - cpdma_ctlr_eoi(priv->dma); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); + } #endif diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 7d3bffd..68c3418 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -493,9 +493,9 @@ int cpdma_ctlr_int_ctrl(struct cpdma_ctlr *ctlr, bool enable) return 0; } -void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr) +void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr, u32 value) { - dma_reg_write(ctlr, CPDMA_MACEOIVECTOR, 0); + dma_reg_write(ctlr, CPDMA_MACEOIVECTOR, value); } struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num, diff --git a/drivers/net/ethernet/ti/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h index a97d6ab..d9bcc60 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.h +++ b/drivers/net/ethernet/ti/davinci_cpdma.h @@ -26,6 +26,11 @@ #define CPDMA_RX_SOURCE_PORT(__status__) ((__status__ >> 16) & 0x7) +#define CPDMA_EOI_RX_THRESH 0x0 +#define CPDMA_EOI_RX 0x1 +#define CPDMA_EOI_TX 0x2 +#define CPDMA_EOI_MISC 0x3 + struct cpdma_params { struct device *dev; void __iomem *dmaregs; @@ -88,7 +93,7 @@ int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, int cpdma_chan_process(struct cpdma_chan *chan, int quota); int cpdma_ctlr_int_ctrl(struct cpdma_ctlr *ctlr, bool enable); -void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr); +void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr, u32 value); int cpdma_chan_int_ctrl(struct cpdma_chan *chan, bool enable); bool cpdma_check_free_tx_desc(struct cpdma_chan *chan); -- cgit v0.10.2 From d4beaa66add8aebf83ab16d2fde4e4de8dac36df Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 18 Feb 2013 01:34:54 +0000 Subject: net: proc: change proc_net_fops_create to proc_create Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 7b69591..ed17a57 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -276,7 +276,7 @@ static int cn_init(void) cn_already_initialized = 1; - proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); + proc_create("connector", S_IRUGO, init_net.proc_net, &cn_file_ops); return 0; } diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index c2e5497..61f2884 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -586,7 +586,8 @@ static int bpq_device_event(struct notifier_block *this,unsigned long event, voi static int __init bpq_init_driver(void) { #ifdef CONFIG_PROC_FS - if (!proc_net_fops_create(&init_net, "bpqether", S_IRUGO, &bpq_info_fops)) { + if (!proc_create("bpqether", S_IRUGO, init_net.proc_net, + &bpq_info_fops)) { printk(KERN_ERR "bpq: cannot create /proc/net/bpqether entry.\n"); return -ENOENT; diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c index 1b4a47b..cab13f4 100644 --- a/drivers/net/hamradio/scc.c +++ b/drivers/net/hamradio/scc.c @@ -2118,7 +2118,7 @@ static int __init scc_init_driver (void) } rtnl_unlock(); - proc_net_fops_create(&init_net, "z8530drv", 0, &scc_net_seq_fops); + proc_create("z8530drv", 0, init_net.proc_net, &scc_net_seq_fops); return 0; } diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index c6645f1..92847d2 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -1167,7 +1167,7 @@ static int __init yam_init_driver(void) yam_timer.expires = jiffies + HZ / 100; add_timer(&yam_timer); - proc_net_fops_create(&init_net, "yam", S_IRUGO, &yam_info_fops); + proc_create("yam", S_IRUGO, init_net.proc_net, &yam_info_fops); return 0; error: while (--i >= 0) { diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index 20f31d0..d7fa96c 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -1134,7 +1134,7 @@ static __net_init int pppoe_init_net(struct net *net) rwlock_init(&pn->hash_lock); - pde = proc_net_fops_create(net, "pppoe", S_IRUGO, &pppoe_seq_fops); + pde = proc_create("pppoe", S_IRUGO, net->proc_net, &pppoe_seq_fops); #ifdef CONFIG_PROC_FS if (!pde) return -ENOMEM; diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index 779095d..b6ccbea 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1992,9 +1992,10 @@ static int __init ax25_init(void) dev_add_pack(&ax25_packet_type); register_netdevice_notifier(&ax25_dev_notifier); - proc_net_fops_create(&init_net, "ax25_route", S_IRUGO, &ax25_route_fops); - proc_net_fops_create(&init_net, "ax25", S_IRUGO, &ax25_info_fops); - proc_net_fops_create(&init_net, "ax25_calls", S_IRUGO, &ax25_uid_fops); + proc_create("ax25_route", S_IRUGO, init_net.proc_net, + &ax25_route_fops); + proc_create("ax25", S_IRUGO, init_net.proc_net, &ax25_info_fops); + proc_create("ax25_calls", S_IRUGO, init_net.proc_net, &ax25_uid_fops); out: return rc; } diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 5355df6..8412b63 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -641,7 +641,7 @@ int bt_procfs_init(struct module* module, struct net *net, const char *name, sk_list->fops.llseek = seq_lseek; sk_list->fops.release = seq_release_private; - pde = proc_net_fops_create(net, name, 0, &sk_list->fops); + pde = proc_create(name, 0, net->proc_net, &sk_list->fops); if (!pde) return -ENOMEM; diff --git a/net/core/dev.c b/net/core/dev.c index 1932d35..f2f81ef 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4518,11 +4518,12 @@ static int __net_init dev_proc_net_init(struct net *net) { int rc = -ENOMEM; - if (!proc_net_fops_create(net, "dev", S_IRUGO, &dev_seq_fops)) + if (!proc_create("dev", S_IRUGO, net->proc_net, &dev_seq_fops)) goto out; - if (!proc_net_fops_create(net, "softnet_stat", S_IRUGO, &softnet_seq_fops)) + if (!proc_create("softnet_stat", S_IRUGO, net->proc_net, + &softnet_seq_fops)) goto out_dev; - if (!proc_net_fops_create(net, "ptype", S_IRUGO, &ptype_seq_fops)) + if (!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops)) goto out_softnet; if (wext_proc_init(net)) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index b079c7b..7c62ec4 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -780,7 +780,7 @@ static const struct file_operations dev_mc_seq_fops = { static int __net_init dev_mc_net_init(struct net *net) { - if (!proc_net_fops_create(net, "dev_mcast", 0, &dev_mc_seq_fops)) + if (!proc_create("dev_mcast", 0, net->proc_net, &dev_mc_seq_fops)) return -ENOMEM; return 0; } diff --git a/net/core/sock.c b/net/core/sock.c index f1e14e2..b4d562ef 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2836,7 +2836,7 @@ static const struct file_operations proto_seq_fops = { static __net_init int proto_init_net(struct net *net) { - if (!proc_net_fops_create(net, "protocols", S_IRUGO, &proto_seq_fops)) + if (!proc_create("protocols", S_IRUGO, net->proc_net, &proto_seq_fops)) return -ENOMEM; return 0; diff --git a/net/dccp/probe.c b/net/dccp/probe.c index 0a8d6eb..d183589 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -171,7 +171,7 @@ static __init int dccpprobe_init(void) spin_lock_init(&dccpw.lock); if (kfifo_alloc(&dccpw.fifo, bufsize, GFP_KERNEL)) return ret; - if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops)) + if (!proc_create(procname, S_IRUSR, init_net.proc_net, &dccpprobe_fops)) goto err0; ret = setup_jprobe(); diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 64d9843..f916013 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -2384,7 +2384,7 @@ static int __init decnet_init(void) dev_add_pack(&dn_dix_packet_type); register_netdevice_notifier(&dn_dev_notifier); - proc_net_fops_create(&init_net, "decnet", S_IRUGO, &dn_socket_seq_fops); + proc_create("decnet", S_IRUGO, init_net.proc_net, &dn_socket_seq_fops); dn_register_sysctl(); out: return rc; diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c index e47ba9f..a04894a 100644 --- a/net/decnet/dn_dev.c +++ b/net/decnet/dn_dev.c @@ -1412,7 +1412,7 @@ void __init dn_dev_init(void) rtnl_register(PF_DECnet, RTM_DELADDR, dn_nl_deladdr, NULL, NULL); rtnl_register(PF_DECnet, RTM_GETADDR, NULL, dn_nl_dump_ifaddr, NULL); - proc_net_fops_create(&init_net, "decnet_dev", S_IRUGO, &dn_dev_seq_fops); + proc_create("decnet_dev", S_IRUGO, init_net.proc_net, &dn_dev_seq_fops); #ifdef CONFIG_SYSCTL { diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c index 856636a..f3408f3 100644 --- a/net/decnet/dn_neigh.c +++ b/net/decnet/dn_neigh.c @@ -590,7 +590,8 @@ static const struct file_operations dn_neigh_seq_fops = { void __init dn_neigh_init(void) { neigh_table_init(&dn_neigh_table); - proc_net_fops_create(&init_net, "decnet_neigh", S_IRUGO, &dn_neigh_seq_fops); + proc_create("decnet_neigh", S_IRUGO, init_net.proc_net, + &dn_neigh_seq_fops); } void __exit dn_neigh_cleanup(void) diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index 1550028..8afb257 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -1901,7 +1901,8 @@ void __init dn_route_init(void) dn_dst_ops.gc_thresh = (dn_rt_hash_mask + 1); - proc_net_fops_create(&init_net, "decnet_cache", S_IRUGO, &dn_rt_cache_seq_fops); + proc_create("decnet_cache", S_IRUGO, init_net.proc_net, + &dn_rt_cache_seq_fops); #ifdef CONFIG_DECNET_ROUTER rtnl_register(PF_DECnet, RTM_GETROUTE, dn_cache_getroute, diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index ded146b..b04c114 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1405,7 +1405,7 @@ static const struct file_operations arp_seq_fops = { static int __net_init arp_net_init(struct net *net) { - if (!proc_net_fops_create(net, "arp", S_IRUGO, &arp_seq_fops)) + if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops)) return -ENOMEM; return 0; } diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 31d771c..67c1d4b 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2607,14 +2607,14 @@ static const struct file_operations fib_route_fops = { int __net_init fib_proc_init(struct net *net) { - if (!proc_net_fops_create(net, "fib_trie", S_IRUGO, &fib_trie_fops)) + if (!proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops)) goto out1; - if (!proc_net_fops_create(net, "fib_triestat", S_IRUGO, - &fib_triestat_fops)) + if (!proc_create("fib_triestat", S_IRUGO, net->proc_net, + &fib_triestat_fops)) goto out2; - if (!proc_net_fops_create(net, "route", S_IRUGO, &fib_route_fops)) + if (!proc_create("route", S_IRUGO, net->proc_net, &fib_route_fops)) goto out3; return 0; diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 736ab70..be85628 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -2646,10 +2646,11 @@ static int __net_init igmp_net_init(struct net *net) { struct proc_dir_entry *pde; - pde = proc_net_fops_create(net, "igmp", S_IRUGO, &igmp_mc_seq_fops); + pde = proc_create("igmp", S_IRUGO, net->proc_net, &igmp_mc_seq_fops); if (!pde) goto out_igmp; - pde = proc_net_fops_create(net, "mcfilter", S_IRUGO, &igmp_mcf_seq_fops); + pde = proc_create("mcfilter", S_IRUGO, net->proc_net, + &igmp_mcf_seq_fops); if (!pde) goto out_mcfilter; return 0; diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index a2e50ae..98cbc68 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1394,7 +1394,7 @@ static int __init ip_auto_config(void) unsigned int i; #ifdef CONFIG_PROC_FS - proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops); + proc_create("pnp", S_IRUGO, init_net.proc_net, &pnp_seq_fops); #endif /* CONFIG_PROC_FS */ if (!ic_enable) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 7085b9b..160a8b8 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -2703,9 +2703,9 @@ static int __net_init ipmr_net_init(struct net *net) #ifdef CONFIG_PROC_FS err = -ENOMEM; - if (!proc_net_fops_create(net, "ip_mr_vif", 0, &ipmr_vif_fops)) + if (!proc_create("ip_mr_vif", 0, net->proc_net, &ipmr_vif_fops)) goto proc_vif_fail; - if (!proc_net_fops_create(net, "ip_mr_cache", 0, &ipmr_mfc_fops)) + if (!proc_create("ip_mr_cache", 0, net->proc_net, &ipmr_mfc_fops)) goto proc_cache_fail; #endif return 0; diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c index 9682b36..48bc681 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c @@ -417,12 +417,12 @@ static int __net_init ip_conntrack_net_init(struct net *net) { struct proc_dir_entry *proc, *proc_exp, *proc_stat; - proc = proc_net_fops_create(net, "ip_conntrack", 0440, &ct_file_ops); + proc = proc_create("ip_conntrack", 0440, net->proc_net, &ct_file_ops); if (!proc) goto err1; - proc_exp = proc_net_fops_create(net, "ip_conntrack_expect", 0440, - &ip_exp_file_ops); + proc_exp = proc_create("ip_conntrack_expect", 0440, net->proc_net, + &ip_exp_file_ops); if (!proc_exp) goto err2; diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 6f9c072..fc62a13 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -889,7 +889,7 @@ static int ping_proc_register(struct net *net) struct proc_dir_entry *p; int rc = 0; - p = proc_net_fops_create(net, "icmp", S_IRUGO, &ping_seq_fops); + p = proc_create("icmp", S_IRUGO, net->proc_net, &ping_seq_fops); if (!p) rc = -ENOMEM; return rc; diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 8de53e1..954bcd4 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -471,11 +471,12 @@ static const struct file_operations netstat_seq_fops = { static __net_init int ip_proc_init_net(struct net *net) { - if (!proc_net_fops_create(net, "sockstat", S_IRUGO, &sockstat_seq_fops)) + if (!proc_create("sockstat", S_IRUGO, net->proc_net, + &sockstat_seq_fops)) goto out_sockstat; - if (!proc_net_fops_create(net, "netstat", S_IRUGO, &netstat_seq_fops)) + if (!proc_create("netstat", S_IRUGO, net->proc_net, &netstat_seq_fops)) goto out_netstat; - if (!proc_net_fops_create(net, "snmp", S_IRUGO, &snmp_seq_fops)) + if (!proc_create("snmp", S_IRUGO, net->proc_net, &snmp_seq_fops)) goto out_snmp; return 0; diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 6f08991..5043a7d 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -1050,7 +1050,7 @@ static const struct file_operations raw_seq_fops = { static __net_init int raw_init_net(struct net *net) { - if (!proc_net_fops_create(net, "raw", S_IRUGO, &raw_seq_fops)) + if (!proc_create("raw", S_IRUGO, net->proc_net, &raw_seq_fops)) return -ENOMEM; return 0; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index a0fcc47..3bdd1b1 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -384,8 +384,8 @@ static int __net_init ip_rt_do_proc_init(struct net *net) { struct proc_dir_entry *pde; - pde = proc_net_fops_create(net, "rt_cache", S_IRUGO, - &rt_cache_seq_fops); + pde = proc_create("rt_cache", S_IRUGO, net->proc_net, + &rt_cache_seq_fops); if (!pde) goto err1; diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c index 4526fe6..1e3a1fb 100644 --- a/net/ipv4/tcp_probe.c +++ b/net/ipv4/tcp_probe.c @@ -234,7 +234,7 @@ static __init int tcpprobe_init(void) if (!tcp_probe.log) goto err0; - if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &tcpprobe_fops)) + if (!proc_create(procname, S_IRUSR, init_net.proc_net, &tcpprobe_fops)) goto err0; ret = register_jprobe(&tcp_jprobe); diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 86c235d..bad7108 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3325,7 +3325,7 @@ static const struct file_operations if6_fops = { static int __net_init if6_proc_net_init(struct net *net) { - if (!proc_net_fops_create(net, "if_inet6", S_IRUGO, &if6_fops)) + if (!proc_create("if_inet6", S_IRUGO, net->proc_net, &if6_fops)) return -ENOMEM; return 0; } diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c index 921b8b3..5a8c009 100644 --- a/net/ipv6/anycast.c +++ b/net/ipv6/anycast.c @@ -509,7 +509,7 @@ static const struct file_operations ac6_seq_fops = { int __net_init ac6_proc_init(struct net *net) { - if (!proc_net_fops_create(net, "anycast6", S_IRUGO, &ac6_seq_fops)) + if (!proc_create("anycast6", S_IRUGO, net->proc_net, &ac6_seq_fops)) return -ENOMEM; return 0; diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index a7da2f4..900d79e 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -806,8 +806,8 @@ static const struct file_operations ip6fl_seq_fops = { static int __net_init ip6_flowlabel_proc_init(struct net *net) { - if (!proc_net_fops_create(net, "ip6_flowlabel", - S_IRUGO, &ip6fl_seq_fops)) + if (!proc_create("ip6_flowlabel", S_IRUGO, net->proc_net, + &ip6fl_seq_fops)) return -ENOMEM; return 0; } diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 351ce98..fdfd96d 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1359,9 +1359,9 @@ static int __net_init ip6mr_net_init(struct net *net) #ifdef CONFIG_PROC_FS err = -ENOMEM; - if (!proc_net_fops_create(net, "ip6_mr_vif", 0, &ip6mr_vif_fops)) + if (!proc_create("ip6_mr_vif", 0, net->proc_net, &ip6mr_vif_fops)) goto proc_vif_fail; - if (!proc_net_fops_create(net, "ip6_mr_cache", 0, &ip6mr_mfc_fops)) + if (!proc_create("ip6_mr_cache", 0, net->proc_net, &ip6mr_mfc_fops)) goto proc_cache_fail; #endif diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 3a2849f..de7d4b9 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -2599,10 +2599,10 @@ static int __net_init igmp6_proc_init(struct net *net) int err; err = -ENOMEM; - if (!proc_net_fops_create(net, "igmp6", S_IRUGO, &igmp6_mc_seq_fops)) + if (!proc_create("igmp6", S_IRUGO, net->proc_net, &igmp6_mc_seq_fops)) goto out; - if (!proc_net_fops_create(net, "mcfilter6", S_IRUGO, - &igmp6_mcf_seq_fops)) + if (!proc_create("mcfilter6", S_IRUGO, net->proc_net, + &igmp6_mcf_seq_fops)) goto out_proc_net_igmp6; err = 0; diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index 745a320..cf8901d 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -295,11 +295,11 @@ int snmp6_unregister_dev(struct inet6_dev *idev) static int __net_init ipv6_proc_init_net(struct net *net) { - if (!proc_net_fops_create(net, "sockstat6", S_IRUGO, - &sockstat6_seq_fops)) + if (!proc_create("sockstat6", S_IRUGO, net->proc_net, + &sockstat6_seq_fops)) return -ENOMEM; - if (!proc_net_fops_create(net, "snmp6", S_IRUGO, &snmp6_seq_fops)) + if (!proc_create("snmp6", S_IRUGO, net->proc_net, &snmp6_seq_fops)) goto proc_snmp6_fail; net->mib.proc_net_devsnmp6 = proc_mkdir("dev_snmp6", net->proc_net); diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 70fa814..ff42fb3 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1292,7 +1292,7 @@ static const struct file_operations raw6_seq_fops = { static int __net_init raw6_init_net(struct net *net) { - if (!proc_net_fops_create(net, "raw6", S_IRUGO, &raw6_seq_fops)) + if (!proc_create("raw6", S_IRUGO, net->proc_net, &raw6_seq_fops)) return -ENOMEM; return 0; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index f3328bc..e1228d8 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2995,8 +2995,8 @@ static void __net_exit ip6_route_net_exit(struct net *net) static int __net_init ip6_route_net_init_late(struct net *net) { #ifdef CONFIG_PROC_FS - proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops); - proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops); + proc_create("ipv6_route", 0, net->proc_net, &ipv6_route_proc_fops); + proc_create("rt6_stats", S_IRUGO, net->proc_net, &rt6_stats_seq_fops); #endif return 0; } diff --git a/net/key/af_key.c b/net/key/af_key.c index 7b3ba32..021a429 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3740,7 +3740,7 @@ static int __net_init pfkey_init_proc(struct net *net) { struct proc_dir_entry *e; - e = proc_net_fops_create(net, "pfkey", 0, &pfkey_proc_ops); + e = proc_create("pfkey", 0, net->proc_net, &pfkey_proc_ops); if (e == NULL) return -ENOMEM; diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 716605c..3ca270b 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1783,7 +1783,8 @@ static __net_init int pppol2tp_init_net(struct net *net) struct proc_dir_entry *pde; int err = 0; - pde = proc_net_fops_create(net, "pppol2tp", S_IRUGO, &pppol2tp_proc_fops); + pde = proc_create("pppol2tp", S_IRUGO, net->proc_net, + &pppol2tp_proc_fops); if (!pde) { err = -ENOMEM; goto out; diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c index 9713e6e..1db8a25 100644 --- a/net/netfilter/ipvs/ip_vs_app.c +++ b/net/netfilter/ipvs/ip_vs_app.c @@ -605,7 +605,7 @@ int __net_init ip_vs_app_net_init(struct net *net) struct netns_ipvs *ipvs = net_ipvs(net); INIT_LIST_HEAD(&ipvs->app_list); - proc_net_fops_create(net, "ip_vs_app", 0, &ip_vs_app_fops); + proc_create("ip_vs_app", 0, net->proc_net, &ip_vs_app_fops); return 0; } diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 68e368a..91ae112 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -1291,8 +1291,8 @@ int __net_init ip_vs_conn_net_init(struct net *net) atomic_set(&ipvs->conn_count, 0); - proc_net_fops_create(net, "ip_vs_conn", 0, &ip_vs_conn_fops); - proc_net_fops_create(net, "ip_vs_conn_sync", 0, &ip_vs_conn_sync_fops); + proc_create("ip_vs_conn", 0, net->proc_net, &ip_vs_conn_fops); + proc_create("ip_vs_conn_sync", 0, net->proc_net, &ip_vs_conn_sync_fops); return 0; } diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index ec664cb..7d69181 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3800,10 +3800,10 @@ int __net_init ip_vs_control_net_init(struct net *net) spin_lock_init(&ipvs->tot_stats.lock); - proc_net_fops_create(net, "ip_vs", 0, &ip_vs_info_fops); - proc_net_fops_create(net, "ip_vs_stats", 0, &ip_vs_stats_fops); - proc_net_fops_create(net, "ip_vs_stats_percpu", 0, - &ip_vs_stats_percpu_fops); + proc_create("ip_vs", 0, net->proc_net, &ip_vs_info_fops); + proc_create("ip_vs_stats", 0, net->proc_net, &ip_vs_stats_fops); + proc_create("ip_vs_stats_percpu", 0, net->proc_net, + &ip_vs_stats_percpu_fops); if (ip_vs_control_net_init_sysctl(net)) goto err; diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index bdd3418..4c15f8d 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -571,7 +571,8 @@ static int exp_proc_init(struct net *net) #ifdef CONFIG_NF_CONNTRACK_PROCFS struct proc_dir_entry *proc; - proc = proc_net_fops_create(net, "nf_conntrack_expect", 0440, &exp_file_ops); + proc = proc_create("nf_conntrack_expect", 0440, net->proc_net, + &exp_file_ops); if (!proc) return -ENOMEM; #endif /* CONFIG_NF_CONNTRACK_PROCFS */ diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 7936bf7..bee9aec 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -366,7 +366,7 @@ static int nf_conntrack_standalone_init_proc(struct net *net) { struct proc_dir_entry *pde; - pde = proc_net_fops_create(net, "nf_conntrack", 0440, &ct_file_ops); + pde = proc_create("nf_conntrack", 0440, net->proc_net, &ct_file_ops); if (!pde) goto out_nf_conntrack; diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 74827e3..50084c4 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2145,7 +2145,7 @@ static const struct net_proto_family netlink_family_ops = { static int __net_init netlink_net_init(struct net *net) { #ifdef CONFIG_PROC_FS - if (!proc_net_fops_create(net, "netlink", 0, &netlink_seq_fops)) + if (!proc_create("netlink", 0, net->proc_net, &netlink_seq_fops)) return -ENOMEM; #endif return 0; diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 7261eb8..71b8613 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1452,9 +1452,9 @@ static int __init nr_proto_init(void) nr_loopback_init(); - proc_net_fops_create(&init_net, "nr", S_IRUGO, &nr_info_fops); - proc_net_fops_create(&init_net, "nr_neigh", S_IRUGO, &nr_neigh_fops); - proc_net_fops_create(&init_net, "nr_nodes", S_IRUGO, &nr_nodes_fops); + proc_create("nr", S_IRUGO, init_net.proc_net, &nr_info_fops); + proc_create("nr_neigh", S_IRUGO, init_net.proc_net, &nr_neigh_fops); + proc_create("nr_nodes", S_IRUGO, init_net.proc_net, &nr_nodes_fops); out: return rc; fail: diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index c111bd0..b7b2d56 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -3828,7 +3828,7 @@ static int __net_init packet_net_init(struct net *net) mutex_init(&net->packet.sklist_lock); INIT_HLIST_HEAD(&net->packet.sklist); - if (!proc_net_fops_create(net, "packet", 0, &packet_seq_fops)) + if (!proc_create("packet", 0, net->proc_net, &packet_seq_fops)) return -ENOMEM; return 0; diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c index 5bf6341..0e527c9 100644 --- a/net/phonet/pn_dev.c +++ b/net/phonet/pn_dev.c @@ -320,7 +320,7 @@ static int __net_init phonet_init_net(struct net *net) { struct phonet_net *pnn = phonet_pernet(net); - if (!proc_net_fops_create(net, "phonet", 0, &pn_sock_seq_fops)) + if (!proc_create("phonet", 0, net->proc_net, &pn_sock_seq_fops)) return -ENOMEM; INIT_LIST_HEAD(&pnn->pndevs.list); @@ -348,7 +348,7 @@ int __init phonet_device_init(void) if (err) return err; - proc_net_fops_create(&init_net, "pnresource", 0, &pn_res_seq_fops); + proc_create("pnresource", 0, init_net.proc_net, &pn_res_seq_fops); register_netdevice_notifier(&phonet_device_notifier); err = phonet_netlink_register(); if (err) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index c4719ce..5fd8aac 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1575,10 +1575,13 @@ static int __init rose_proto_init(void) rose_add_loopback_neigh(); - proc_net_fops_create(&init_net, "rose", S_IRUGO, &rose_info_fops); - proc_net_fops_create(&init_net, "rose_neigh", S_IRUGO, &rose_neigh_fops); - proc_net_fops_create(&init_net, "rose_nodes", S_IRUGO, &rose_nodes_fops); - proc_net_fops_create(&init_net, "rose_routes", S_IRUGO, &rose_routes_fops); + proc_create("rose", S_IRUGO, init_net.proc_net, &rose_info_fops); + proc_create("rose_neigh", S_IRUGO, init_net.proc_net, + &rose_neigh_fops); + proc_create("rose_nodes", S_IRUGO, init_net.proc_net, + &rose_nodes_fops); + proc_create("rose_routes", S_IRUGO, init_net.proc_net, + &rose_routes_fops); out: return rc; fail: diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 5b0fd29..59c7c7d 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -839,8 +839,9 @@ static int __init af_rxrpc_init(void) } #ifdef CONFIG_PROC_FS - proc_net_fops_create(&init_net, "rxrpc_calls", 0, &rxrpc_call_seq_fops); - proc_net_fops_create(&init_net, "rxrpc_conns", 0, &rxrpc_connection_seq_fops); + proc_create("rxrpc_calls", 0, init_net.proc_net, &rxrpc_call_seq_fops); + proc_create("rxrpc_conns", 0, init_net.proc_net, + &rxrpc_connection_seq_fops); #endif return 0; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index fe1ba54..d8cf7d3 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1768,7 +1768,7 @@ static int __net_init psched_net_init(struct net *net) { struct proc_dir_entry *e; - e = proc_net_fops_create(net, "psched", 0, &psched_fops); + e = proc_create("psched", 0, net->proc_net, &psched_fops); if (e == NULL) return -ENOMEM; diff --git a/net/sctp/probe.c b/net/sctp/probe.c index 261b7b9..dd507f5 100644 --- a/net/sctp/probe.c +++ b/net/sctp/probe.c @@ -195,8 +195,8 @@ static __init int sctpprobe_init(void) if (kfifo_alloc(&sctpw.fifo, bufsize, GFP_KERNEL)) return ret; - if (!proc_net_fops_create(&init_net, procname, S_IRUSR, - &sctpprobe_fops)) + if (!proc_create(procname, S_IRUSR, init_net.proc_net, + &sctpprobe_fops)) goto free_kfifo; ret = register_jprobe(&sctp_recv_probe); diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 0c61236..0c479b6 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2402,7 +2402,7 @@ static int __net_init unix_net_init(struct net *net) goto out; #ifdef CONFIG_PROC_FS - if (!proc_net_fops_create(net, "unix", 0, &unix_seq_fops)) { + if (!proc_create("unix", 0, net->proc_net, &unix_seq_fops)) { unix_sysctl_unregister(net); goto out; } diff --git a/net/wireless/wext-proc.c b/net/wireless/wext-proc.c index 8bafa31..00fc5bb 100644 --- a/net/wireless/wext-proc.c +++ b/net/wireless/wext-proc.c @@ -143,7 +143,8 @@ static const struct file_operations wireless_seq_fops = { int __net_init wext_proc_init(struct net *net) { /* Create /proc/net/wireless entry */ - if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops)) + if (!proc_create("wireless", S_IRUGO, net->proc_net, + &wireless_seq_fops)) return -ENOMEM; return 0; diff --git a/net/xfrm/xfrm_proc.c b/net/xfrm/xfrm_proc.c index 6039038..9abe14f 100644 --- a/net/xfrm/xfrm_proc.c +++ b/net/xfrm/xfrm_proc.c @@ -74,8 +74,8 @@ static const struct file_operations xfrm_statistics_seq_fops = { int __net_init xfrm_proc_init(struct net *net) { - if (!proc_net_fops_create(net, "xfrm_stat", S_IRUGO, - &xfrm_statistics_seq_fops)) + if (!proc_create("xfrm_stat", S_IRUGO, net->proc_net, + &xfrm_statistics_seq_fops)) return -ENOMEM; return 0; } -- cgit v0.10.2 From b4278c961aca320839964e23cfc7906ff61af0c2 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 18 Feb 2013 01:34:55 +0000 Subject: net: proc: remove proc_net_fops_create proc_net_fops_create has been replaced by proc_create, we can remove it now. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index fe72cd0..30f7c67 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -177,14 +177,6 @@ const struct file_operations proc_net_operations = { .readdir = proc_tgid_net_readdir, }; - -struct proc_dir_entry *proc_net_fops_create(struct net *net, - const char *name, umode_t mode, const struct file_operations *fops) -{ - return proc_create(name, mode, net->proc_net, fops); -} -EXPORT_SYMBOL_GPL(proc_net_fops_create); - void proc_net_remove(struct net *net, const char *name) { remove_proc_entry(name, net->proc_net); diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 32676b3..35ee189 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -171,8 +171,6 @@ static inline struct proc_dir_entry *create_proc_read_entry(const char *name, return res; } -extern struct proc_dir_entry *proc_net_fops_create(struct net *net, - const char *name, umode_t mode, const struct file_operations *fops); extern void proc_net_remove(struct net *net, const char *name); extern struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name, struct proc_dir_entry *parent); @@ -184,7 +182,6 @@ extern int proc_alloc_inum(unsigned int *pino); extern void proc_free_inum(unsigned int inum); #else -#define proc_net_fops_create(net, name, mode, fops) ({ (void)(mode), NULL; }) static inline void proc_net_remove(struct net *net, const char *name) {} static inline void proc_flush_task(struct task_struct *task) -- cgit v0.10.2 From ece31ffd539e8e2b586b1ca5f50bc4f4591e3893 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 18 Feb 2013 01:34:56 +0000 Subject: net: proc: change proc_net_remove to remove_proc_entry proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index ed17a57..f1b7e24 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -287,7 +287,7 @@ static void cn_fini(void) cn_already_initialized = 0; - proc_net_remove(&init_net, "connector"); + remove_proc_entry("connector", init_net.proc_net); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 61f2884..02de6c8 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -611,7 +611,7 @@ static void __exit bpq_cleanup_driver(void) unregister_netdevice_notifier(&bpq_dev_notifier); - proc_net_remove(&init_net, "bpqether"); + remove_proc_entry("bpqether", init_net.proc_net); rtnl_lock(); while (!list_empty(&bpq_devices)) { diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c index cab13f4..bc1d521 100644 --- a/drivers/net/hamradio/scc.c +++ b/drivers/net/hamradio/scc.c @@ -2173,7 +2173,7 @@ static void __exit scc_cleanup_driver(void) if (Vector_Latch) release_region(Vector_Latch, 1); - proc_net_remove(&init_net, "z8530drv"); + remove_proc_entry("z8530drv", init_net.proc_net); } MODULE_AUTHOR("Joerg Reuter "); diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 92847d2..4cf8f10 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -1199,7 +1199,7 @@ static void __exit yam_cleanup_driver(void) kfree(p); } - proc_net_remove(&init_net, "yam"); + remove_proc_entry("yam", init_net.proc_net); } /* --------------------------------------------------------------------- */ diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index d7fa96c..bb07ba9 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -1145,7 +1145,7 @@ static __net_init int pppoe_init_net(struct net *net) static __net_exit void pppoe_exit_net(struct net *net) { - proc_net_remove(net, "pppoe"); + remove_proc_entry("pppoe", net->proc_net); } static struct pernet_operations pppoe_net_ops = { diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index 4de77ea..dc526ec 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -131,7 +131,7 @@ void vlan_proc_cleanup(struct net *net) remove_proc_entry(name_conf, vn->proc_vlan_dir); if (vn->proc_vlan_dir) - proc_net_remove(net, name_root); + remove_proc_entry(name_root, net->proc_net); /* Dynamically added entries should be cleaned up as their vlan_device * is removed, so we should not have to take care of it here... diff --git a/net/atm/proc.c b/net/atm/proc.c index 0d020de..b4e7534 100644 --- a/net/atm/proc.c +++ b/net/atm/proc.c @@ -460,7 +460,7 @@ static void atm_proc_dirs_remove(void) if (e->dirent) remove_proc_entry(e->name, atm_proc_root); } - proc_net_remove(&init_net, "atm"); + remove_proc_entry("atm", init_net.proc_net); } int __init atm_proc_init(void) diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index b6ccbea..69a06c4 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -2009,9 +2009,9 @@ MODULE_ALIAS_NETPROTO(PF_AX25); static void __exit ax25_exit(void) { - proc_net_remove(&init_net, "ax25_route"); - proc_net_remove(&init_net, "ax25"); - proc_net_remove(&init_net, "ax25_calls"); + remove_proc_entry("ax25_route", init_net.proc_net); + remove_proc_entry("ax25", init_net.proc_net); + remove_proc_entry("ax25_calls", init_net.proc_net); unregister_netdevice_notifier(&ax25_dev_notifier); diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 8412b63..d3ee69b 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -652,7 +652,7 @@ int bt_procfs_init(struct module* module, struct net *net, const char *name, void bt_procfs_cleanup(struct net *net, const char *name) { - proc_net_remove(net, name); + remove_proc_entry(name, net->proc_net); } #else int bt_procfs_init(struct module* module, struct net *net, const char *name, diff --git a/net/can/bcm.c b/net/can/bcm.c index 28e12d1..5dcb200 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1633,7 +1633,7 @@ static void __exit bcm_module_exit(void) can_proto_unregister(&bcm_can_proto); if (proc_dir) - proc_net_remove(&init_net, "can-bcm"); + remove_proc_entry("can-bcm", init_net.proc_net); } module_init(bcm_module_init); diff --git a/net/can/proc.c b/net/can/proc.c index ae56690..4973358 100644 --- a/net/can/proc.c +++ b/net/can/proc.c @@ -531,5 +531,5 @@ void can_remove_proc(void) can_remove_proc_readentry(CAN_PROC_RCVLIST_SFF); if (can_dir) - proc_net_remove(&init_net, "can"); + remove_proc_entry("can", init_net.proc_net); } diff --git a/net/core/dev.c b/net/core/dev.c index f2f81ef..decf55f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4532,11 +4532,11 @@ static int __net_init dev_proc_net_init(struct net *net) out: return rc; out_ptype: - proc_net_remove(net, "ptype"); + remove_proc_entry("ptype", net->proc_net); out_softnet: - proc_net_remove(net, "softnet_stat"); + remove_proc_entry("softnet_stat", net->proc_net); out_dev: - proc_net_remove(net, "dev"); + remove_proc_entry("dev", net->proc_net); goto out; } @@ -4544,9 +4544,9 @@ static void __net_exit dev_proc_net_exit(struct net *net) { wext_proc_exit(net); - proc_net_remove(net, "ptype"); - proc_net_remove(net, "softnet_stat"); - proc_net_remove(net, "dev"); + remove_proc_entry("ptype", net->proc_net); + remove_proc_entry("softnet_stat", net->proc_net); + remove_proc_entry("dev", net->proc_net); } static struct pernet_operations __net_initdata dev_proc_ops = { diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 7c62ec4..8956252 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -787,7 +787,7 @@ static int __net_init dev_mc_net_init(struct net *net) static void __net_exit dev_mc_net_exit(struct net *net) { - proc_net_remove(net, "dev_mcast"); + remove_proc_entry("dev_mcast", net->proc_net); } static struct pernet_operations __net_initdata dev_mc_net_ops = { diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 2201e69..6048fc1 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3650,7 +3650,7 @@ static int __net_init pg_net_init(struct net *net) remove_entry: remove_proc_entry(PGCTRL, pn->proc_dir); remove: - proc_net_remove(pn->net, PG_PROC_DIR); + remove_proc_entry(PG_PROC_DIR, pn->net->proc_net); return ret; } @@ -3676,7 +3676,7 @@ static void __net_exit pg_net_exit(struct net *net) } remove_proc_entry(PGCTRL, pn->proc_dir); - proc_net_remove(pn->net, PG_PROC_DIR); + remove_proc_entry(PG_PROC_DIR, pn->net->proc_net); } static struct pernet_operations pg_net_ops = { diff --git a/net/core/sock.c b/net/core/sock.c index b4d562ef..fe96c5d 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2844,7 +2844,7 @@ static __net_init int proto_init_net(struct net *net) static __net_exit void proto_exit_net(struct net *net) { - proc_net_remove(net, "protocols"); + remove_proc_entry("protocols", net->proc_net); } diff --git a/net/dccp/probe.c b/net/dccp/probe.c index d183589..4c6bdf9 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -181,7 +181,7 @@ static __init int dccpprobe_init(void) pr_info("DCCP watch registered (port=%d)\n", port); return 0; err1: - proc_net_remove(&init_net, procname); + remove_proc_entry(procname, init_net.proc_net); err0: kfifo_free(&dccpw.fifo); return ret; @@ -191,7 +191,7 @@ module_init(dccpprobe_init); static __exit void dccpprobe_exit(void) { kfifo_free(&dccpw.fifo); - proc_net_remove(&init_net, procname); + remove_proc_entry(procname, init_net.proc_net); unregister_jprobe(&dccp_send_probe); } diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index f916013..c4a2def 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -2413,7 +2413,7 @@ static void __exit decnet_exit(void) dn_neigh_cleanup(); dn_fib_cleanup(); - proc_net_remove(&init_net, "decnet"); + remove_proc_entry("decnet", init_net.proc_net); proto_unregister(&dn_proto); diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c index a04894a..c8da116 100644 --- a/net/decnet/dn_dev.c +++ b/net/decnet/dn_dev.c @@ -1433,7 +1433,7 @@ void __exit dn_dev_cleanup(void) } #endif /* CONFIG_SYSCTL */ - proc_net_remove(&init_net, "decnet_dev"); + remove_proc_entry("decnet_dev", init_net.proc_net); dn_dev_devices_off(); } diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c index f3408f3..f8637f9 100644 --- a/net/decnet/dn_neigh.c +++ b/net/decnet/dn_neigh.c @@ -596,6 +596,6 @@ void __init dn_neigh_init(void) void __exit dn_neigh_cleanup(void) { - proc_net_remove(&init_net, "decnet_neigh"); + remove_proc_entry("decnet_neigh", init_net.proc_net); neigh_table_clear(&dn_neigh_table); } diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index 8afb257..5ac0e15 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -1918,7 +1918,7 @@ void __exit dn_route_cleanup(void) del_timer(&dn_route_timer); dn_run_flush(0); - proc_net_remove(&init_net, "decnet_cache"); + remove_proc_entry("decnet_cache", init_net.proc_net); dst_entries_destroy(&dn_dst_ops); } diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index b04c114..fea4929 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1412,7 +1412,7 @@ static int __net_init arp_net_init(struct net *net) static void __net_exit arp_net_exit(struct net *net) { - proc_net_remove(net, "arp"); + remove_proc_entry("arp", net->proc_net); } static struct pernet_operations arp_net_ops = { diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 67c1d4b..61e03da 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2620,18 +2620,18 @@ int __net_init fib_proc_init(struct net *net) return 0; out3: - proc_net_remove(net, "fib_triestat"); + remove_proc_entry("fib_triestat", net->proc_net); out2: - proc_net_remove(net, "fib_trie"); + remove_proc_entry("fib_trie", net->proc_net); out1: return -ENOMEM; } void __net_exit fib_proc_exit(struct net *net) { - proc_net_remove(net, "fib_trie"); - proc_net_remove(net, "fib_triestat"); - proc_net_remove(net, "route"); + remove_proc_entry("fib_trie", net->proc_net); + remove_proc_entry("fib_triestat", net->proc_net); + remove_proc_entry("route", net->proc_net); } #endif /* CONFIG_PROC_FS */ diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index be85628..d8c2327 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -2656,15 +2656,15 @@ static int __net_init igmp_net_init(struct net *net) return 0; out_mcfilter: - proc_net_remove(net, "igmp"); + remove_proc_entry("igmp", net->proc_net); out_igmp: return -ENOMEM; } static void __net_exit igmp_net_exit(struct net *net) { - proc_net_remove(net, "mcfilter"); - proc_net_remove(net, "igmp"); + remove_proc_entry("mcfilter", net->proc_net); + remove_proc_entry("igmp", net->proc_net); } static struct pernet_operations igmp_net_ops = { diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 160a8b8..5f95b3a 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -2712,7 +2712,7 @@ static int __net_init ipmr_net_init(struct net *net) #ifdef CONFIG_PROC_FS proc_cache_fail: - proc_net_remove(net, "ip_mr_vif"); + remove_proc_entry("ip_mr_vif", net->proc_net); proc_vif_fail: ipmr_rules_exit(net); #endif @@ -2723,8 +2723,8 @@ fail: static void __net_exit ipmr_net_exit(struct net *net) { #ifdef CONFIG_PROC_FS - proc_net_remove(net, "ip_mr_cache"); - proc_net_remove(net, "ip_mr_vif"); + remove_proc_entry("ip_mr_cache", net->proc_net); + remove_proc_entry("ip_mr_vif", net->proc_net); #endif ipmr_rules_exit(net); } diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c index 48bc681..f2ca127 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c @@ -433,9 +433,9 @@ static int __net_init ip_conntrack_net_init(struct net *net) return 0; err3: - proc_net_remove(net, "ip_conntrack_expect"); + remove_proc_entry("ip_conntrack_expect", net->proc_net); err2: - proc_net_remove(net, "ip_conntrack"); + remove_proc_entry("ip_conntrack", net->proc_net); err1: return -ENOMEM; } @@ -443,8 +443,8 @@ err1: static void __net_exit ip_conntrack_net_exit(struct net *net) { remove_proc_entry("ip_conntrack", net->proc_net_stat); - proc_net_remove(net, "ip_conntrack_expect"); - proc_net_remove(net, "ip_conntrack"); + remove_proc_entry("ip_conntrack_expect", net->proc_net); + remove_proc_entry("ip_conntrack", net->proc_net); } static struct pernet_operations ip_conntrack_net_ops = { diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index fc62a13..55c4ee1 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -897,7 +897,7 @@ static int ping_proc_register(struct net *net) static void ping_proc_unregister(struct net *net) { - proc_net_remove(net, "icmp"); + remove_proc_entry("icmp", net->proc_net); } diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 954bcd4..32030a2 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -482,18 +482,18 @@ static __net_init int ip_proc_init_net(struct net *net) return 0; out_snmp: - proc_net_remove(net, "netstat"); + remove_proc_entry("netstat", net->proc_net); out_netstat: - proc_net_remove(net, "sockstat"); + remove_proc_entry("sockstat", net->proc_net); out_sockstat: return -ENOMEM; } static __net_exit void ip_proc_exit_net(struct net *net) { - proc_net_remove(net, "snmp"); - proc_net_remove(net, "netstat"); - proc_net_remove(net, "sockstat"); + remove_proc_entry("snmp", net->proc_net); + remove_proc_entry("netstat", net->proc_net); + remove_proc_entry("sockstat", net->proc_net); } static __net_initdata struct pernet_operations ip_proc_ops = { diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 5043a7d..53ddebc 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -1058,7 +1058,7 @@ static __net_init int raw_init_net(struct net *net) static __net_exit void raw_exit_net(struct net *net) { - proc_net_remove(net, "raw"); + remove_proc_entry("raw", net->proc_net); } static __net_initdata struct pernet_operations raw_net_ops = { diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 77f5050..145d3bf 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2616,7 +2616,7 @@ EXPORT_SYMBOL(tcp_proc_register); void tcp_proc_unregister(struct net *net, struct tcp_seq_afinfo *afinfo) { - proc_net_remove(net, afinfo->name); + remove_proc_entry(afinfo->name, net->proc_net); } EXPORT_SYMBOL(tcp_proc_unregister); diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c index 1e3a1fb..d4943f6 100644 --- a/net/ipv4/tcp_probe.c +++ b/net/ipv4/tcp_probe.c @@ -244,7 +244,7 @@ static __init int tcpprobe_init(void) pr_info("probe registered (port=%d) bufsize=%u\n", port, bufsize); return 0; err1: - proc_net_remove(&init_net, procname); + remove_proc_entry(procname, init_net.proc_net); err0: kfree(tcp_probe.log); return ret; @@ -253,7 +253,7 @@ module_init(tcpprobe_init); static __exit void tcpprobe_exit(void) { - proc_net_remove(&init_net, procname); + remove_proc_entry(procname, init_net.proc_net); unregister_jprobe(&tcp_jprobe); kfree(tcp_probe.log); } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 39a5e7a..265c42c 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2122,7 +2122,7 @@ EXPORT_SYMBOL(udp_proc_register); void udp_proc_unregister(struct net *net, struct udp_seq_afinfo *afinfo) { - proc_net_remove(net, afinfo->name); + remove_proc_entry(afinfo->name, net->proc_net); } EXPORT_SYMBOL(udp_proc_unregister); diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index bad7108..4dc0d44 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3332,7 +3332,7 @@ static int __net_init if6_proc_net_init(struct net *net) static void __net_exit if6_proc_net_exit(struct net *net) { - proc_net_remove(net, "if_inet6"); + remove_proc_entry("if_inet6", net->proc_net); } static struct pernet_operations if6_proc_net_ops = { diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c index 5a8c009..5a80f15 100644 --- a/net/ipv6/anycast.c +++ b/net/ipv6/anycast.c @@ -517,7 +517,7 @@ int __net_init ac6_proc_init(struct net *net) void ac6_proc_exit(struct net *net) { - proc_net_remove(net, "anycast6"); + remove_proc_entry("anycast6", net->proc_net); } #endif diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index 900d79e..b973ed3 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -814,7 +814,7 @@ static int __net_init ip6_flowlabel_proc_init(struct net *net) static void __net_exit ip6_flowlabel_proc_fini(struct net *net) { - proc_net_remove(net, "ip6_flowlabel"); + remove_proc_entry("ip6_flowlabel", net->proc_net); } #else static inline int ip6_flowlabel_proc_init(struct net *net) diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index fdfd96d..96bfb4e 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1369,7 +1369,7 @@ static int __net_init ip6mr_net_init(struct net *net) #ifdef CONFIG_PROC_FS proc_cache_fail: - proc_net_remove(net, "ip6_mr_vif"); + remove_proc_entry("ip6_mr_vif", net->proc_net); proc_vif_fail: ip6mr_rules_exit(net); #endif @@ -1380,8 +1380,8 @@ fail: static void __net_exit ip6mr_net_exit(struct net *net) { #ifdef CONFIG_PROC_FS - proc_net_remove(net, "ip6_mr_cache"); - proc_net_remove(net, "ip6_mr_vif"); + remove_proc_entry("ip6_mr_cache", net->proc_net); + remove_proc_entry("ip6_mr_vif", net->proc_net); #endif ip6mr_rules_exit(net); } diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index de7d4b9..bfa6cc3 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -2610,14 +2610,14 @@ out: return err; out_proc_net_igmp6: - proc_net_remove(net, "igmp6"); + remove_proc_entry("igmp6", net->proc_net); goto out; } static void __net_exit igmp6_proc_exit(struct net *net) { - proc_net_remove(net, "mcfilter6"); - proc_net_remove(net, "igmp6"); + remove_proc_entry("mcfilter6", net->proc_net); + remove_proc_entry("igmp6", net->proc_net); } #else static inline int igmp6_proc_init(struct net *net) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index cf8901d..bbbe53a 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -308,17 +308,17 @@ static int __net_init ipv6_proc_init_net(struct net *net) return 0; proc_dev_snmp6_fail: - proc_net_remove(net, "snmp6"); + remove_proc_entry("snmp6", net->proc_net); proc_snmp6_fail: - proc_net_remove(net, "sockstat6"); + remove_proc_entry("sockstat6", net->proc_net); return -ENOMEM; } static void __net_exit ipv6_proc_exit_net(struct net *net) { - proc_net_remove(net, "sockstat6"); - proc_net_remove(net, "dev_snmp6"); - proc_net_remove(net, "snmp6"); + remove_proc_entry("sockstat6", net->proc_net); + remove_proc_entry("dev_snmp6", net->proc_net); + remove_proc_entry("snmp6", net->proc_net); } static struct pernet_operations ipv6_proc_ops = { diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index ff42fb3..c65907d 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1300,7 +1300,7 @@ static int __net_init raw6_init_net(struct net *net) static void __net_exit raw6_exit_net(struct net *net) { - proc_net_remove(net, "raw6"); + remove_proc_entry("raw6", net->proc_net); } static struct pernet_operations raw6_net_ops = { diff --git a/net/ipv6/route.c b/net/ipv6/route.c index e1228d8..515bb51 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -3004,8 +3004,8 @@ static int __net_init ip6_route_net_init_late(struct net *net) static void __net_exit ip6_route_net_exit_late(struct net *net) { #ifdef CONFIG_PROC_FS - proc_net_remove(net, "ipv6_route"); - proc_net_remove(net, "rt6_stats"); + remove_proc_entry("ipv6_route", net->proc_net); + remove_proc_entry("rt6_stats", net->proc_net); #endif } diff --git a/net/key/af_key.c b/net/key/af_key.c index 021a429..9ef7985 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3749,7 +3749,7 @@ static int __net_init pfkey_init_proc(struct net *net) static void __net_exit pfkey_exit_proc(struct net *net) { - proc_net_remove(net, "pfkey"); + remove_proc_entry("pfkey", net->proc_net); } #else static inline int pfkey_init_proc(struct net *net) diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 3ca270b..3f4e3af 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1796,7 +1796,7 @@ out: static __net_exit void pppol2tp_exit_net(struct net *net) { - proc_net_remove(net, "pppol2tp"); + remove_proc_entry("pppol2tp", net->proc_net); } static struct pernet_operations pppol2tp_net_ops = { diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c index 1db8a25..0b779d7 100644 --- a/net/netfilter/ipvs/ip_vs_app.c +++ b/net/netfilter/ipvs/ip_vs_app.c @@ -612,5 +612,5 @@ int __net_init ip_vs_app_net_init(struct net *net) void __net_exit ip_vs_app_net_cleanup(struct net *net) { unregister_ip_vs_app(net, NULL /* all */); - proc_net_remove(net, "ip_vs_app"); + remove_proc_entry("ip_vs_app", net->proc_net); } diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 91ae112..9f00db7 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -1300,8 +1300,8 @@ void __net_exit ip_vs_conn_net_cleanup(struct net *net) { /* flush all the connection entries first */ ip_vs_conn_flush(net); - proc_net_remove(net, "ip_vs_conn"); - proc_net_remove(net, "ip_vs_conn_sync"); + remove_proc_entry("ip_vs_conn", net->proc_net); + remove_proc_entry("ip_vs_conn_sync", net->proc_net); } int __init ip_vs_conn_init(void) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 7d69181..c68198b 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3822,9 +3822,9 @@ void __net_exit ip_vs_control_net_cleanup(struct net *net) ip_vs_trash_cleanup(net); ip_vs_stop_estimator(net, &ipvs->tot_stats); ip_vs_control_net_cleanup_sysctl(net); - proc_net_remove(net, "ip_vs_stats_percpu"); - proc_net_remove(net, "ip_vs_stats"); - proc_net_remove(net, "ip_vs"); + remove_proc_entry("ip_vs_stats_percpu", net->proc_net); + remove_proc_entry("ip_vs_stats", net->proc_net); + remove_proc_entry("ip_vs", net->proc_net); free_percpu(ipvs->tot_stats.cpustats); } diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 4c15f8d..3921e5b 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -582,7 +582,7 @@ static int exp_proc_init(struct net *net) static void exp_proc_remove(struct net *net) { #ifdef CONFIG_NF_CONNTRACK_PROCFS - proc_net_remove(net, "nf_conntrack_expect"); + remove_proc_entry("nf_conntrack_expect", net->proc_net); #endif /* CONFIG_NF_CONNTRACK_PROCFS */ } diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index bee9aec..6bcce40 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -377,7 +377,7 @@ static int nf_conntrack_standalone_init_proc(struct net *net) return 0; out_stat_nf_conntrack: - proc_net_remove(net, "nf_conntrack"); + remove_proc_entry("nf_conntrack", net->proc_net); out_nf_conntrack: return -ENOMEM; } @@ -385,7 +385,7 @@ out_nf_conntrack: static void nf_conntrack_standalone_fini_proc(struct net *net) { remove_proc_entry("nf_conntrack", net->proc_net_stat); - proc_net_remove(net, "nf_conntrack"); + remove_proc_entry("nf_conntrack", net->proc_net); } #else static int nf_conntrack_standalone_init_proc(struct net *net) diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index 7b3a9e5..686c771 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -1323,12 +1323,12 @@ int xt_proto_init(struct net *net, u_int8_t af) out_remove_matches: strlcpy(buf, xt_prefix[af], sizeof(buf)); strlcat(buf, FORMAT_MATCHES, sizeof(buf)); - proc_net_remove(net, buf); + remove_proc_entry(buf, net->proc_net); out_remove_tables: strlcpy(buf, xt_prefix[af], sizeof(buf)); strlcat(buf, FORMAT_TABLES, sizeof(buf)); - proc_net_remove(net, buf); + remove_proc_entry(buf, net->proc_net); out: return -1; #endif @@ -1342,15 +1342,15 @@ void xt_proto_fini(struct net *net, u_int8_t af) strlcpy(buf, xt_prefix[af], sizeof(buf)); strlcat(buf, FORMAT_TABLES, sizeof(buf)); - proc_net_remove(net, buf); + remove_proc_entry(buf, net->proc_net); strlcpy(buf, xt_prefix[af], sizeof(buf)); strlcat(buf, FORMAT_TARGETS, sizeof(buf)); - proc_net_remove(net, buf); + remove_proc_entry(buf, net->proc_net); strlcpy(buf, xt_prefix[af], sizeof(buf)); strlcat(buf, FORMAT_MATCHES, sizeof(buf)); - proc_net_remove(net, buf); + remove_proc_entry(buf, net->proc_net); #endif /*CONFIG_PROC_FS*/ } EXPORT_SYMBOL_GPL(xt_proto_fini); diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index a9d7af9..98218c8 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -867,7 +867,7 @@ static int __net_init hashlimit_proc_net_init(struct net *net) #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) hashlimit_net->ip6t_hashlimit = proc_mkdir("ip6t_hashlimit", net->proc_net); if (!hashlimit_net->ip6t_hashlimit) { - proc_net_remove(net, "ipt_hashlimit"); + remove_proc_entry("ipt_hashlimit", net->proc_net); return -ENOMEM; } #endif @@ -897,9 +897,9 @@ static void __net_exit hashlimit_proc_net_exit(struct net *net) hashlimit_net->ip6t_hashlimit = NULL; mutex_unlock(&hashlimit_mutex); - proc_net_remove(net, "ipt_hashlimit"); + remove_proc_entry("ipt_hashlimit", net->proc_net); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) - proc_net_remove(net, "ip6t_hashlimit"); + remove_proc_entry("ip6t_hashlimit", net->proc_net); #endif } diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c index 978efc9..31bf233 100644 --- a/net/netfilter/xt_recent.c +++ b/net/netfilter/xt_recent.c @@ -643,7 +643,7 @@ static void __net_exit recent_proc_net_exit(struct net *net) recent_net->xt_recent = NULL; spin_unlock_bh(&recent_lock); - proc_net_remove(net, "xt_recent"); + remove_proc_entry("xt_recent", net->proc_net); } #else static inline int recent_proc_net_init(struct net *net) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 50084c4..3d55e0c 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2154,7 +2154,7 @@ static int __net_init netlink_net_init(struct net *net) static void __net_exit netlink_net_exit(struct net *net) { #ifdef CONFIG_PROC_FS - proc_net_remove(net, "netlink"); + remove_proc_entry("netlink", net->proc_net); #endif } diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 71b8613..297b07a 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1482,9 +1482,9 @@ static void __exit nr_exit(void) { int i; - proc_net_remove(&init_net, "nr"); - proc_net_remove(&init_net, "nr_neigh"); - proc_net_remove(&init_net, "nr_nodes"); + remove_proc_entry("nr", init_net.proc_net); + remove_proc_entry("nr_neigh", init_net.proc_net); + remove_proc_entry("nr_nodes", init_net.proc_net); nr_loopback_clear(); nr_rt_free(); diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index b7b2d56..c7bfeff 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -3836,7 +3836,7 @@ static int __net_init packet_net_init(struct net *net) static void __net_exit packet_net_exit(struct net *net) { - proc_net_remove(net, "packet"); + remove_proc_entry("packet", net->proc_net); } static struct pernet_operations packet_net_ops = { diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c index 0e527c9..45a7df6 100644 --- a/net/phonet/pn_dev.c +++ b/net/phonet/pn_dev.c @@ -331,7 +331,7 @@ static int __net_init phonet_init_net(struct net *net) static void __net_exit phonet_exit_net(struct net *net) { - proc_net_remove(net, "phonet"); + remove_proc_entry("phonet", net->proc_net); } static struct pernet_operations phonet_net_ops = { @@ -361,7 +361,7 @@ void phonet_device_exit(void) rtnl_unregister_all(PF_PHONET); unregister_netdevice_notifier(&phonet_device_notifier); unregister_pernet_subsys(&phonet_net_ops); - proc_net_remove(&init_net, "pnresource"); + remove_proc_entry("pnresource", init_net.proc_net); } int phonet_route_add(struct net_device *dev, u8 daddr) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 5fd8aac..b768fe9 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1608,10 +1608,10 @@ static void __exit rose_exit(void) { int i; - proc_net_remove(&init_net, "rose"); - proc_net_remove(&init_net, "rose_neigh"); - proc_net_remove(&init_net, "rose_nodes"); - proc_net_remove(&init_net, "rose_routes"); + remove_proc_entry("rose", init_net.proc_net); + remove_proc_entry("rose_neigh", init_net.proc_net); + remove_proc_entry("rose_nodes", init_net.proc_net); + remove_proc_entry("rose_routes", init_net.proc_net); rose_loopback_clear(); rose_rt_free(); diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 59c7c7d..e61aa60 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -879,8 +879,8 @@ static void __exit af_rxrpc_exit(void) _debug("flush scheduled work"); flush_workqueue(rxrpc_workqueue); - proc_net_remove(&init_net, "rxrpc_conns"); - proc_net_remove(&init_net, "rxrpc_calls"); + remove_proc_entry("rxrpc_conns", init_net.proc_net); + remove_proc_entry("rxrpc_calls", init_net.proc_net); destroy_workqueue(rxrpc_workqueue); kmem_cache_destroy(rxrpc_call_jar); _leave(""); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index d8cf7d3..a181b48 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1777,7 +1777,7 @@ static int __net_init psched_net_init(struct net *net) static void __net_exit psched_net_exit(struct net *net) { - proc_net_remove(net, "psched"); + remove_proc_entry("psched", net->proc_net); } #else static int __net_init psched_net_init(struct net *net) diff --git a/net/sctp/probe.c b/net/sctp/probe.c index dd507f5..ad0dba8 100644 --- a/net/sctp/probe.c +++ b/net/sctp/probe.c @@ -208,7 +208,7 @@ static __init int sctpprobe_init(void) return 0; remove_proc: - proc_net_remove(&init_net, procname); + remove_proc_entry(procname, init_net.proc_net); free_kfifo: kfifo_free(&sctpw.fifo); return ret; @@ -217,7 +217,7 @@ free_kfifo: static __exit void sctpprobe_exit(void) { kfifo_free(&sctpw.fifo); - proc_net_remove(&init_net, procname); + remove_proc_entry(procname, init_net.proc_net); unregister_jprobe(&sctp_recv_probe); } diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 0c479b6..87d2842 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2415,7 +2415,7 @@ out: static void __net_exit unix_net_exit(struct net *net) { unix_sysctl_unregister(net); - proc_net_remove(net, "unix"); + remove_proc_entry("unix", net->proc_net); } static struct pernet_operations unix_net_ops = { diff --git a/net/wireless/wext-proc.c b/net/wireless/wext-proc.c index 00fc5bb..e98a01c 100644 --- a/net/wireless/wext-proc.c +++ b/net/wireless/wext-proc.c @@ -152,5 +152,5 @@ int __net_init wext_proc_init(struct net *net) void __net_exit wext_proc_exit(struct net *net) { - proc_net_remove(net, "wireless"); + remove_proc_entry("wireless", net->proc_net); } diff --git a/net/xfrm/xfrm_proc.c b/net/xfrm/xfrm_proc.c index 9abe14f..c721b0d 100644 --- a/net/xfrm/xfrm_proc.c +++ b/net/xfrm/xfrm_proc.c @@ -82,5 +82,5 @@ int __net_init xfrm_proc_init(struct net *net) void xfrm_proc_fini(struct net *net) { - proc_net_remove(net, "xfrm_stat"); + remove_proc_entry("xfrm_stat", net->proc_net); } -- cgit v0.10.2 From c2399059a389ba686fa7f45d8913a708914752c4 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 18 Feb 2013 01:34:57 +0000 Subject: net: proc: remove proc_net_remove proc_net_remove has been replaced by remove_proc_entry. we can remove it now. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index 30f7c67..3131a03 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -177,12 +177,6 @@ const struct file_operations proc_net_operations = { .readdir = proc_tgid_net_readdir, }; -void proc_net_remove(struct net *net, const char *name) -{ - remove_proc_entry(name, net->proc_net); -} -EXPORT_SYMBOL_GPL(proc_net_remove); - static __net_init int proc_net_ns_init(struct net *net) { struct proc_dir_entry *netd, *net_statd; diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 35ee189..319f694 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -171,7 +171,6 @@ static inline struct proc_dir_entry *create_proc_read_entry(const char *name, return res; } -extern void proc_net_remove(struct net *net, const char *name); extern struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name, struct proc_dir_entry *parent); @@ -182,8 +181,6 @@ extern int proc_alloc_inum(unsigned int *pino); extern void proc_free_inum(unsigned int inum); #else -static inline void proc_net_remove(struct net *net, const char *name) {} - static inline void proc_flush_task(struct task_struct *task) { } -- cgit v0.10.2 From 18cf0d0784b4a634472ed24d0d7ca1c721d93e90 Mon Sep 17 00:00:00 2001 From: Romain KUNTZ Date: Mon, 18 Feb 2013 02:36:24 +0000 Subject: xfrm: release neighbor upon dst destruction Neighbor is cloned in xfrm6_fill_dst but seems to never be released. Neighbor entry should be released when XFRM6 dst entry is destroyed in xfrm6_dst_destroy, otherwise references may be kept forever on the device pointed by the neighbor entry. I may not have understood all the subtleties of XFRM & dst so I would be happy to receive comments on this patch. Signed-off-by: Romain Kuntz Signed-off-by: David S. Miller diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index c984413..8f32718 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -236,6 +236,8 @@ static void xfrm6_dst_destroy(struct dst_entry *dst) { struct xfrm_dst *xdst = (struct xfrm_dst *)dst; + if (likely(xdst->u.rt6.n)) + neigh_release(xdst->u.rt6.n); if (likely(xdst->u.rt6.rt6i_idev)) in6_dev_put(xdst->u.rt6.rt6i_idev); dst_destroy_metrics_generic(dst); -- cgit v0.10.2 From 7777ac3860327da557665f6e53cd82fbe40f151b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 18 Feb 2013 06:04:10 +0000 Subject: VSOCK: get rid of EXPORT_SYMTAB This is the default behavior for a looooooong time. Acked-by: Andy King Signed-off-by: Dmitry Torokhov Signed-off-by: David S. Miller diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index 54bb7bd..a8efe5a 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -76,8 +76,6 @@ */ #include - -#define EXPORT_SYMTAB #include #include #include diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c index e8a87cf..a70ace8 100644 --- a/net/vmw_vsock/vmci_transport.c +++ b/net/vmw_vsock/vmci_transport.c @@ -14,8 +14,6 @@ */ #include - -#define EXPORT_SYMTAB #include #include #include -- cgit v0.10.2 From 7ccd7de691bcc7194deb68b1db391861ada5427e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 18 Feb 2013 06:04:11 +0000 Subject: VSOCK: get rid of vsock_version.h There isn't really a need to have a separate file for it. Acked-by: Andy King Signed-off-by: Dmitry Torokhov Signed-off-by: David S. Miller diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index a8efe5a..c1b9e55 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -98,7 +98,6 @@ #include #include "af_vsock.h" -#include "vsock_version.h" static int __vsock_bind(struct sock *sk, struct sockaddr_vm *addr); static void vsock_sk_destruct(struct sock *sk); @@ -2009,5 +2008,5 @@ EXPORT_SYMBOL_GPL(vsock_core_exit); MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMware Virtual Socket Family"); -MODULE_VERSION(VSOCK_DRIVER_VERSION_STRING); +MODULE_VERSION("1.0.0.0-k"); MODULE_LICENSE("GPL v2"); diff --git a/net/vmw_vsock/vsock_version.h b/net/vmw_vsock/vsock_version.h deleted file mode 100644 index 4df7f5e..0000000 --- a/net/vmw_vsock/vsock_version.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * VMware vSockets Driver - * - * Copyright (C) 2011-2012 VMware, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation version 2 and no later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef _VSOCK_VERSION_H_ -#define _VSOCK_VERSION_H_ - -#define VSOCK_DRIVER_VERSION_PARTS { 1, 0, 0, 0 } -#define VSOCK_DRIVER_VERSION_STRING "1.0.0.0-k" - -#endif /* _VSOCK_VERSION_H_ */ -- cgit v0.10.2 From 5b8ca5344f82e594e21c9fbbdf3b13507ecdb5a2 Mon Sep 17 00:00:00 2001 From: Andy King Date: Mon, 18 Feb 2013 06:04:12 +0000 Subject: VSOCK: Remove hypervisor-only socket option Remove hypervisor-only socket option. Reported-by: Gerd Hoffmann Acked-by: Dmitry Torokhov Signed-off-by: Andy King Signed-off-by: David S. Miller diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h index f7f2e99..df91301 100644 --- a/include/uapi/linux/vm_sockets.h +++ b/include/uapi/linux/vm_sockets.h @@ -52,14 +52,6 @@ #define SO_VM_SOCKETS_PEER_HOST_VM_ID 3 -/* Option name for socket's service label. Use as the option name in - * setsockopt(3) or getsockopt(3) to set or get the service label for a socket. - * The service label is a C-style NUL-terminated string. Only available for - * hypervisor endpoints. - */ - -#define SO_VM_SOCKETS_SERVICE_LABEL 4 - /* Option name for determining if a socket is trusted. Use as the option name * in getsockopt(3) to determine if a socket is trusted. The value is a * signed integer. -- cgit v0.10.2 From 6cf1c5fc26c6507bcb0edced6fcda876a79b5a6d Mon Sep 17 00:00:00 2001 From: Andy King Date: Mon, 18 Feb 2013 06:04:13 +0000 Subject: VSOCK: Don't reject PF_VSOCK protocol Allow our own family as the protocol value for socket creation. Reported-by: Gerd Hoffmann Signed-off-by: Andy King Signed-off-by: David S. Miller diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index c1b9e55..ca511c4 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -1860,7 +1860,7 @@ static int vsock_create(struct net *net, struct socket *sock, if (!sock) return -EINVAL; - if (protocol) + if (protocol && protocol != PF_VSOCK) return -EPROTONOSUPPORT; switch (sock->type) { -- cgit v0.10.2 From 8064b3cf750e71fdaf306abb4433a93d0f45f4c9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 Feb 2013 10:18:52 +0000 Subject: ipv6: fix a sparse warning net/ipv6/reassembly.c:82:72: warning: incorrect type in argument 3 (different base types) net/ipv6/reassembly.c:82:72: expected unsigned int [unsigned] [usertype] c net/ipv6/reassembly.c:82:72: got restricted __be32 [usertype] id Signed-off-by: Eric Dumazet Reported-by: Fengguang Wu Signed-off-by: David S. Miller diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 9a6428a..3c6a772 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -79,7 +79,8 @@ unsigned int inet6_hash_frag(__be32 id, const struct in6_addr *saddr, { u32 c; - c = jhash_3words(ipv6_addr_hash(saddr), ipv6_addr_hash(daddr), id, rnd); + c = jhash_3words(ipv6_addr_hash(saddr), ipv6_addr_hash(daddr), + (__force u32)id, rnd); return c & (INETFRAGS_HASHSZ - 1); } -- cgit v0.10.2 From 3d48203847c096afaddb2ba3c0623cfe49e91fa3 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 15 Feb 2013 21:37:54 -0800 Subject: mwifiex: fix empty TX ring check for PCIe8897 while unloading driver While unloading driver, we free all pending TX packets by flushing TX ring. There is unhandled case for PCIE8897 while checking for ring empty condition. This patch adds the handling by calling mwifiex_pcie_txbd_empty(). Signed-off-by: Avinash Patil Signed-off-by: Yogesh Ashok Powar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 492655c0..4b54bcf 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1023,10 +1023,7 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) adapter->data_sent = false; if (card->txbd_flush) { - if (((card->txbd_wrptr & reg->tx_mask) == - (card->txbd_rdptr & reg->tx_mask)) && - ((card->txbd_wrptr & reg->tx_rollover_ind) != - (card->txbd_rdptr & reg->tx_rollover_ind))) + if (mwifiex_pcie_txbd_empty(card, card->txbd_rdptr)) card->txbd_flush = 0; else mwifiex_clean_pcie_ring_buf(adapter); -- cgit v0.10.2 From 073c9e6f86e58ba652c694b340f0460fc8156268 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 15 Feb 2013 21:44:29 -0800 Subject: mwifiex: coding style cleanup in bss parameter update They all can make one line. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 949234f..e275aec 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1485,20 +1485,15 @@ static int mwifiex_update_curr_bss_params(struct mwifiex_private *priv, priv->curr_bss_params.bss_descriptor.bcn_wapi_ie = NULL; priv->curr_bss_params.bss_descriptor.wapi_offset = 0; priv->curr_bss_params.bss_descriptor.bcn_ht_cap = NULL; - priv->curr_bss_params.bss_descriptor.ht_cap_offset = - 0; + priv->curr_bss_params.bss_descriptor.ht_cap_offset = 0; priv->curr_bss_params.bss_descriptor.bcn_ht_oper = NULL; - priv->curr_bss_params.bss_descriptor.ht_info_offset = - 0; - priv->curr_bss_params.bss_descriptor.bcn_bss_co_2040 = - NULL; - priv->curr_bss_params.bss_descriptor. - bss_co_2040_offset = 0; + priv->curr_bss_params.bss_descriptor.ht_info_offset = 0; + priv->curr_bss_params.bss_descriptor.bcn_bss_co_2040 = NULL; + priv->curr_bss_params.bss_descriptor.bss_co_2040_offset = 0; priv->curr_bss_params.bss_descriptor.bcn_ext_cap = NULL; priv->curr_bss_params.bss_descriptor.ext_cap_offset = 0; priv->curr_bss_params.bss_descriptor.beacon_buf = NULL; - priv->curr_bss_params.bss_descriptor.beacon_buf_size = - 0; + priv->curr_bss_params.bss_descriptor.beacon_buf_size = 0; /* Make a copy of current BSSID descriptor */ memcpy(&priv->curr_bss_params.bss_descriptor, bss_desc, -- cgit v0.10.2 From a5f390562a375a315292648e2da865a12b42f280 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Fri, 15 Feb 2013 21:44:30 -0800 Subject: mwifiex: add 802.11AC support For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Avinash Patil Signed-off-by: Nishant Sarmukadam Signed-off-by: Bing Zhao Signed-off-by: Frank Huang Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c new file mode 100644 index 0000000..cf43b3c --- /dev/null +++ b/drivers/net/wireless/mwifiex/11ac.c @@ -0,0 +1,261 @@ +/* + * Marvell Wireless LAN device driver: 802.11ac + * + * Copyright (C) 2013, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "fw.h" +#include "main.h" +#include "11ac.h" + +/* This function converts the 2-bit MCS map to the highest long GI + * VHT data rate. + */ +static u16 +mwifiex_convert_mcsmap_to_maxrate(struct mwifiex_private *priv, + u8 bands, u16 mcs_map) +{ + u8 i, nss, max_mcs; + u16 max_rate = 0; + u32 usr_vht_cap_info = 0; + struct mwifiex_adapter *adapter = priv->adapter; + /* tables of the MCS map to the highest data rate (in Mbps) + * supported for long GI + */ + u16 max_rate_lgi_80MHZ[8][3] = { + {0x124, 0x15F, 0x186}, /* NSS = 1 */ + {0x249, 0x2BE, 0x30C}, /* NSS = 2 */ + {0x36D, 0x41D, 0x492}, /* NSS = 3 */ + {0x492, 0x57C, 0x618}, /* NSS = 4 */ + {0x5B6, 0x6DB, 0x79E}, /* NSS = 5 */ + {0x6DB, 0x83A, 0x0}, /* NSS = 6 */ + {0x7FF, 0x999, 0xAAA}, /* NSS = 7 */ + {0x924, 0xAF8, 0xC30} /* NSS = 8 */ + }; + u16 max_rate_lgi_160MHZ[8][3] = { + {0x249, 0x2BE, 0x30C}, /* NSS = 1 */ + {0x492, 0x57C, 0x618}, /* NSS = 2 */ + {0x6DB, 0x83A, 0x0}, /* NSS = 3 */ + {0x924, 0xAF8, 0xC30}, /* NSS = 4 */ + {0xB6D, 0xDB6, 0xF3C}, /* NSS = 5 */ + {0xDB6, 0x1074, 0x1248}, /* NSS = 6 */ + {0xFFF, 0x1332, 0x1554}, /* NSS = 7 */ + {0x1248, 0x15F0, 0x1860} /* NSS = 8 */ + }; + + if (bands & BAND_AAC) + usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_a; + else + usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_bg; + + /* find the max NSS supported */ + nss = 0; + for (i = 0; i < 8; i++) { + max_mcs = (mcs_map >> (2 * i)) & 0x3; + if (max_mcs < 3) + nss = i; + } + max_mcs = (mcs_map >> (2 * nss)) & 0x3; + + /* if max_mcs is 3, nss must be 0 (SS = 1). Thus, max mcs is MCS 9 */ + if (max_mcs >= 3) + max_mcs = 2; + + if (GET_VHTCAP_CHWDSET(usr_vht_cap_info)) { + /* support 160 MHz */ + max_rate = max_rate_lgi_160MHZ[nss][max_mcs]; + if (!max_rate) + /* MCS9 is not supported in NSS6 */ + max_rate = max_rate_lgi_160MHZ[nss][max_mcs - 1]; + } else { + max_rate = max_rate_lgi_80MHZ[nss][max_mcs]; + if (!max_rate) + /* MCS9 is not supported in NSS3 */ + max_rate = max_rate_lgi_80MHZ[nss][max_mcs - 1]; + } + + return max_rate; +} + +static void +mwifiex_fill_vht_cap_info(struct mwifiex_private *priv, + struct mwifiex_ie_types_vhtcap *vht_cap, u8 bands) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + if (bands & BAND_A) + vht_cap->vht_cap.vht_cap_info = + cpu_to_le32(adapter->usr_dot_11ac_dev_cap_a); + else + vht_cap->vht_cap.vht_cap_info = + cpu_to_le32(adapter->usr_dot_11ac_dev_cap_bg); +} + +static void +mwifiex_fill_vht_cap_tlv(struct mwifiex_private *priv, + struct mwifiex_ie_types_vhtcap *vht_cap, u8 bands) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u16 mcs_map_user, mcs_map_resp, mcs_map_result; + u16 mcs_user, mcs_resp, nss, tmp; + + /* Fill VHT cap info */ + mwifiex_fill_vht_cap_info(priv, vht_cap, bands); + + /* rx MCS Set: find the minimum of the user rx mcs and ap rx mcs */ + mcs_map_user = GET_DEVRXMCSMAP(adapter->usr_dot_11ac_mcs_support); + mcs_map_resp = le16_to_cpu(vht_cap->vht_cap.supp_mcs.rx_mcs_map); + mcs_map_result = 0; + + for (nss = 1; nss <= 8; nss++) { + mcs_user = GET_VHTNSSMCS(mcs_map_user, nss); + mcs_resp = GET_VHTNSSMCS(mcs_map_resp, nss); + + if ((mcs_user == NO_NSS_SUPPORT) || + (mcs_resp == NO_NSS_SUPPORT)) + SET_VHTNSSMCS(mcs_map_result, nss, NO_NSS_SUPPORT); + else + SET_VHTNSSMCS(mcs_map_result, nss, + min(mcs_user, mcs_resp)); + } + + vht_cap->vht_cap.supp_mcs.rx_mcs_map = cpu_to_le16(mcs_map_result); + + tmp = mwifiex_convert_mcsmap_to_maxrate(priv, bands, mcs_map_result); + vht_cap->vht_cap.supp_mcs.rx_highest = cpu_to_le16(tmp); + + /* tx MCS Set: find the minimum of the user tx mcs and ap tx mcs */ + mcs_map_user = GET_DEVTXMCSMAP(adapter->usr_dot_11ac_mcs_support); + mcs_map_resp = le16_to_cpu(vht_cap->vht_cap.supp_mcs.tx_mcs_map); + mcs_map_result = 0; + + for (nss = 1; nss <= 8; nss++) { + mcs_user = GET_VHTNSSMCS(mcs_map_user, nss); + mcs_resp = GET_VHTNSSMCS(mcs_map_resp, nss); + if ((mcs_user == NO_NSS_SUPPORT) || + (mcs_resp == NO_NSS_SUPPORT)) + SET_VHTNSSMCS(mcs_map_result, nss, NO_NSS_SUPPORT); + else + SET_VHTNSSMCS(mcs_map_result, nss, + min(mcs_user, mcs_resp)); + } + + vht_cap->vht_cap.supp_mcs.tx_mcs_map = cpu_to_le16(mcs_map_result); + + tmp = mwifiex_convert_mcsmap_to_maxrate(priv, bands, mcs_map_result); + vht_cap->vht_cap.supp_mcs.tx_highest = cpu_to_le16(tmp); + + return; +} + +int mwifiex_cmd_append_11ac_tlv(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + u8 **buffer) +{ + struct mwifiex_ie_types_vhtcap *vht_cap; + struct mwifiex_ie_types_oper_mode_ntf *oper_ntf; + struct ieee_types_oper_mode_ntf *ieee_oper_ntf; + struct mwifiex_ie_types_vht_oper *vht_op; + struct mwifiex_adapter *adapter = priv->adapter; + u8 supp_chwd_set; + u32 usr_vht_cap_info; + int ret_len = 0; + + if (bss_desc->bss_band & BAND_A) + usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_a; + else + usr_vht_cap_info = adapter->usr_dot_11ac_dev_cap_bg; + + /* VHT Capabilities IE */ + if (bss_desc->bcn_vht_cap) { + vht_cap = (struct mwifiex_ie_types_vhtcap *)*buffer; + memset(vht_cap, 0, sizeof(*vht_cap)); + vht_cap->header.type = cpu_to_le16(WLAN_EID_VHT_CAPABILITY); + vht_cap->header.len = + cpu_to_le16(sizeof(struct ieee80211_vht_cap)); + memcpy((u8 *)vht_cap + sizeof(struct mwifiex_ie_types_header), + (u8 *)bss_desc->bcn_vht_cap + + sizeof(struct ieee_types_header), + le16_to_cpu(vht_cap->header.len)); + + mwifiex_fill_vht_cap_tlv(priv, vht_cap, bss_desc->bss_band); + *buffer += sizeof(*vht_cap); + ret_len += sizeof(*vht_cap); + } + + /* VHT Operation IE */ + if (bss_desc->bcn_vht_oper) { + if (priv->bss_mode == HostCmd_BSS_MODE_IBSS) { + vht_op = (struct mwifiex_ie_types_vht_oper *)*buffer; + memset(vht_op, 0, sizeof(*vht_op)); + vht_op->header.type = + cpu_to_le16(WLAN_EID_VHT_OPERATION); + vht_op->header.len = cpu_to_le16(sizeof(*vht_op) - + sizeof(struct mwifiex_ie_types_header)); + memcpy((u8 *)vht_op + + sizeof(struct mwifiex_ie_types_header), + (u8 *)bss_desc->bcn_vht_oper + + sizeof(struct ieee_types_header), + le16_to_cpu(vht_op->header.len)); + + /* negotiate the channel width and central freq + * and keep the central freq as the peer suggests + */ + supp_chwd_set = GET_VHTCAP_CHWDSET(usr_vht_cap_info); + + switch (supp_chwd_set) { + case 0: + vht_op->chan_width = + min_t(u8, IEEE80211_VHT_CHANWIDTH_80MHZ, + bss_desc->bcn_vht_oper->chan_width); + break; + case 1: + vht_op->chan_width = + min_t(u8, IEEE80211_VHT_CHANWIDTH_160MHZ, + bss_desc->bcn_vht_oper->chan_width); + break; + case 2: + vht_op->chan_width = + min_t(u8, IEEE80211_VHT_CHANWIDTH_80P80MHZ, + bss_desc->bcn_vht_oper->chan_width); + break; + default: + vht_op->chan_width = + IEEE80211_VHT_CHANWIDTH_USE_HT; + break; + } + + *buffer += sizeof(*vht_op); + ret_len += sizeof(*vht_op); + } + } + + /* Operating Mode Notification IE */ + if (bss_desc->oper_mode) { + ieee_oper_ntf = bss_desc->oper_mode; + oper_ntf = (void *)*buffer; + memset(oper_ntf, 0, sizeof(*oper_ntf)); + oper_ntf->header.type = cpu_to_le16(WLAN_EID_OPMODE_NOTIF); + oper_ntf->header.len = cpu_to_le16(sizeof(u8)); + oper_ntf->oper_mode = ieee_oper_ntf->oper_mode; + *buffer += sizeof(*oper_ntf); + ret_len += sizeof(*oper_ntf); + } + + return ret_len; +} diff --git a/drivers/net/wireless/mwifiex/11ac.h b/drivers/net/wireless/mwifiex/11ac.h new file mode 100644 index 0000000..80fd1ba --- /dev/null +++ b/drivers/net/wireless/mwifiex/11ac.h @@ -0,0 +1,26 @@ +/* + * Marvell Wireless LAN device driver: 802.11ac + * + * Copyright (C) 2013, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_11AC_H_ +#define _MWIFIEX_11AC_H_ + +int mwifiex_cmd_append_11ac_tlv(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + u8 **buffer); +#endif /* _MWIFIEX_11AC_H_ */ diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index 48cc46b..5e4e51a 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -250,7 +250,8 @@ int mwifiex_cmd_amsdu_aggr_ctrl(struct host_cmd_ds_command *cmd, * - Setting HT Tx capability and HT Tx information fields * - Ensuring correct endian-ness */ -int mwifiex_cmd_11n_cfg(struct host_cmd_ds_command *cmd, u16 cmd_action, +int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, u16 cmd_action, struct mwifiex_ds_11n_tx_cfg *txcfg) { struct host_cmd_ds_11n_cfg *htcfg = &cmd->params.htcfg; @@ -260,6 +261,10 @@ int mwifiex_cmd_11n_cfg(struct host_cmd_ds_command *cmd, u16 cmd_action, htcfg->action = cpu_to_le16(cmd_action); htcfg->ht_tx_cap = cpu_to_le16(txcfg->tx_htcap); htcfg->ht_tx_info = cpu_to_le16(txcfg->tx_htinfo); + + if (priv->adapter->is_hw_11ac_capable) + htcfg->misc_config = cpu_to_le16(txcfg->misc_config); + return 0; } diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h index 29a4c02..375db01 100644 --- a/drivers/net/wireless/mwifiex/11n.h +++ b/drivers/net/wireless/mwifiex/11n.h @@ -28,9 +28,9 @@ int mwifiex_ret_11n_delba(struct mwifiex_private *priv, struct host_cmd_ds_command *resp); int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv, struct host_cmd_ds_command *resp); -int mwifiex_cmd_11n_cfg(struct host_cmd_ds_command *cmd, u16 cmd_action, +int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, u16 cmd_action, struct mwifiex_ds_11n_tx_cfg *txcfg); - int mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, struct mwifiex_bssdescriptor *bss_desc, u8 **buffer); diff --git a/drivers/net/wireless/mwifiex/Makefile b/drivers/net/wireless/mwifiex/Makefile index dd0410d..97b245c 100644 --- a/drivers/net/wireless/mwifiex/Makefile +++ b/drivers/net/wireless/mwifiex/Makefile @@ -23,6 +23,7 @@ mwifiex-y += util.o mwifiex-y += txrx.o mwifiex-y += wmm.o mwifiex-y += 11n.o +mwifiex-y += 11ac.o mwifiex-y += 11n_aggr.o mwifiex-y += 11n_rxreorder.o mwifiex-y += scan.o diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 81c84a2..9667425 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -834,6 +834,66 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy, return ret; } +static void +mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, + struct rate_info *rate) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + if (adapter->is_hw_11ac_capable) { + /* bit[1-0]: 00=LG 01=HT 10=VHT */ + if (tx_htinfo & BIT(0)) { + /* HT */ + rate->mcs = priv->tx_rate; + rate->flags |= RATE_INFO_FLAGS_MCS; + } + if (tx_htinfo & BIT(1)) { + /* VHT */ + rate->mcs = priv->tx_rate & 0x0F; + rate->flags |= RATE_INFO_FLAGS_VHT_MCS; + } + + if (tx_htinfo & (BIT(1) | BIT(0))) { + /* HT or VHT */ + switch (tx_htinfo & (BIT(3) | BIT(2))) { + case 0: + /* This will be 20MHz */ + break; + case (BIT(2)): + rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + break; + case (BIT(3)): + rate->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; + break; + case (BIT(3) | BIT(2)): + rate->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; + break; + } + + if (tx_htinfo & BIT(4)) + rate->flags |= RATE_INFO_FLAGS_SHORT_GI; + + if ((priv->tx_rate >> 4) == 1) + rate->nss = 2; + else + rate->nss = 1; + } + } else { + /* + * Bit 0 in tx_htinfo indicates that current Tx rate + * is 11n rate. Valid MCS index values for us are 0 to 15. + */ + if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { + rate->mcs = priv->tx_rate; + rate->flags |= RATE_INFO_FLAGS_MCS; + if (tx_htinfo & BIT(1)) + rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + if (tx_htinfo & BIT(2)) + rate->flags |= RATE_INFO_FLAGS_SHORT_GI; + } + } +} + /* * This function dumps the station information on a buffer. * @@ -873,20 +933,7 @@ mwifiex_dump_station_info(struct mwifiex_private *priv, HostCmd_ACT_GEN_GET, DTIM_PERIOD_I, &priv->dtim_period); - /* - * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid - * MCS index values for us are 0 to 15. - */ - if ((priv->tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { - sinfo->txrate.mcs = priv->tx_rate; - sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; - /* 40MHz rate */ - if (priv->tx_htinfo & BIT(1)) - sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; - /* SGI enabled */ - if (priv->tx_htinfo & BIT(2)) - sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; - } + mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate); sinfo->signal_avg = priv->bcn_rssi_avg; sinfo->rx_bytes = priv->stats.rx_bytes; @@ -1295,20 +1342,22 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, /* Set appropriate bands */ if (params->chandef.chan->band == IEEE80211_BAND_2GHZ) { bss_cfg->band_cfg = BAND_CONFIG_BG; + config_bands = BAND_B | BAND_G; - if (cfg80211_get_chandef_type(¶ms->chandef) == - NL80211_CHAN_NO_HT) - config_bands = BAND_B | BAND_G; - else - config_bands = BAND_B | BAND_G | BAND_GN; + if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT) + config_bands |= BAND_GN; + + if (params->chandef.width > NL80211_CHAN_WIDTH_40) + config_bands |= BAND_GAC; } else { bss_cfg->band_cfg = BAND_CONFIG_A; + config_bands = BAND_A; - if (cfg80211_get_chandef_type(¶ms->chandef) == - NL80211_CHAN_NO_HT) - config_bands = BAND_A; - else - config_bands = BAND_AN | BAND_A; + if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT) + config_bands |= BAND_AN; + + if (params->chandef.width > NL80211_CHAN_WIDTH_40) + config_bands |= BAND_AAC; } if (!((config_bands | priv->adapter->fw_bands) & @@ -1881,6 +1930,79 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, return 0; } +static void mwifiex_setup_vht_caps(struct ieee80211_sta_vht_cap *vht_info, + struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u32 vht_cap = 0, cap = adapter->hw_dot_11ac_dev_cap; + + vht_info->vht_supported = true; + + switch (GET_VHTCAP_MAXMPDULEN(cap)) { + case 0x00: + vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895; + break; + case 0x01: + vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991; + break; + case 0x10: + vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454; + break; + default: + dev_err(adapter->dev, "unsupported MAX MPDU len\n"); + break; + } + + if (ISSUPP_11ACVHTHTCVHT(cap)) + vht_cap |= IEEE80211_VHT_CAP_HTC_VHT; + + if (ISSUPP_11ACVHTTXOPPS(cap)) + vht_cap |= IEEE80211_VHT_CAP_VHT_TXOP_PS; + + if (ISSUPP_11ACMURXBEAMFORMEE(cap)) + vht_cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; + + if (ISSUPP_11ACMUTXBEAMFORMEE(cap)) + vht_cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; + + if (ISSUPP_11ACSUBEAMFORMER(cap)) + vht_cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE; + + if (ISSUPP_11ACSUBEAMFORMEE(cap)) + vht_cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; + + if (ISSUPP_11ACRXSTBC(cap)) + vht_cap |= IEEE80211_VHT_CAP_RXSTBC_1; + + if (ISSUPP_11ACTXSTBC(cap)) + vht_cap |= IEEE80211_VHT_CAP_TXSTBC; + + if (ISSUPP_11ACSGI160(cap)) + vht_cap |= IEEE80211_VHT_CAP_SHORT_GI_160; + + if (ISSUPP_11ACSGI80(cap)) + vht_cap |= IEEE80211_VHT_CAP_SHORT_GI_80; + + if (ISSUPP_11ACLDPC(cap)) + vht_cap |= IEEE80211_VHT_CAP_RXLDPC; + + if (ISSUPP_11ACBW8080(cap)) + vht_cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ; + + if (ISSUPP_11ACBW160(cap)) + vht_cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; + + vht_info->cap = vht_cap; + + /* Update MCS support for VHT */ + vht_info->vht_mcs.rx_mcs_map = cpu_to_le16( + adapter->hw_dot_11ac_mcs_support & 0xFFFF); + vht_info->vht_mcs.rx_highest = 0; + vht_info->vht_mcs.tx_mcs_map = cpu_to_le16( + adapter->hw_dot_11ac_mcs_support >> 16); + vht_info->vht_mcs.tx_highest = 0; +} + /* * This function sets up the CFG802.11 specific HT capability fields * with default values. @@ -2094,11 +2216,18 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy, priv->netdev = dev; mwifiex_setup_ht_caps(&wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap, priv); + if (adapter->is_hw_11ac_capable) + mwifiex_setup_vht_caps( + &wiphy->bands[IEEE80211_BAND_2GHZ]->vht_cap, priv); if (adapter->config_bands & BAND_A) mwifiex_setup_ht_caps( &wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap, priv); + if ((adapter->config_bands & BAND_A) && adapter->is_hw_11ac_capable) + mwifiex_setup_vht_caps( + &wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap, priv); + dev_net_set(dev, wiphy_net(wiphy)); dev->ieee80211_ptr = priv->wdev; dev->ieee80211_ptr->iftype = priv->bss_mode; diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c index f69300f..988552d 100644 --- a/drivers/net/wireless/mwifiex/cfp.c +++ b/drivers/net/wireless/mwifiex/cfp.c @@ -106,8 +106,8 @@ u8 *mwifiex_11d_code_2_region(u8 code) * This function maps an index in supported rates table into * the corresponding data rate. */ -u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv, u8 index, - u8 ht_info) +u32 mwifiex_index_to_acs_data_rate(struct mwifiex_private *priv, + u8 index, u8 ht_info) { /* * For every mcs_rate line, the first 8 bytes are for stream 1x1, @@ -130,10 +130,155 @@ u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv, u8 index, { 0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90, 0x1c, 0x39, 0x56, 0x73, 0xad, 0xe7, 0x104, 0x120 } }; + /* AC rates */ + u16 ac_mcs_rate_nss1[8][10] = { + /* LG 160M */ + { 0x75, 0xEA, 0x15F, 0x1D4, 0x2BE, 0x3A8, 0x41D, + 0x492, 0x57C, 0x618 }, + + /* SG 160M */ + { 0x82, 0x104, 0x186, 0x208, 0x30C, 0x410, 0x492, + 0x514, 0x618, 0x6C6 }, + + /* LG 80M */ + { 0x3B, 0x75, 0xB0, 0xEA, 0x15F, 0x1D4, 0x20F, + 0x249, 0x2BE, 0x30C }, + + /* SG 80M */ + { 0x41, 0x82, 0xC3, 0x104, 0x186, 0x208, 0x249, + 0x28A, 0x30C, 0x363 }, + + /* LG 40M */ + { 0x1B, 0x36, 0x51, 0x6C, 0xA2, 0xD8, 0xF3, + 0x10E, 0x144, 0x168 }, + + /* SG 40M */ + { 0x1E, 0x3C, 0x5A, 0x78, 0xB4, 0xF0, 0x10E, + 0x12C, 0x168, 0x190 }, + + /* LG 20M */ + { 0xD, 0x1A, 0x27, 0x34, 0x4E, 0x68, 0x75, 0x82, 0x9C, 0x00 }, + + /* SG 20M */ + { 0xF, 0x1D, 0x2C, 0x3A, 0x57, 0x74, 0x82, 0x91, 0xAE, 0x00 }, + }; + /* NSS2 note: the value in the table is 2 multiplier of the actual + * rate + */ + u16 ac_mcs_rate_nss2[8][10] = { + /* LG 160M */ + { 0xEA, 0x1D4, 0x2BE, 0x3A8, 0x57C, 0x750, 0x83A, + 0x924, 0xAF8, 0xC30 }, + + /* SG 160M */ + { 0x104, 0x208, 0x30C, 0x410, 0x618, 0x820, 0x924, + 0xA28, 0xC30, 0xD8B }, + + /* LG 80M */ + { 0x75, 0xEA, 0x15F, 0x1D4, 0x2BE, 0x3A8, 0x41D, + 0x492, 0x57C, 0x618 }, + + /* SG 80M */ + { 0x82, 0x104, 0x186, 0x208, 0x30C, 0x410, 0x492, + 0x514, 0x618, 0x6C6 }, + + /* LG 40M */ + { 0x36, 0x6C, 0xA2, 0xD8, 0x144, 0x1B0, 0x1E6, + 0x21C, 0x288, 0x2D0 }, + + /* SG 40M */ + { 0x3C, 0x78, 0xB4, 0xF0, 0x168, 0x1E0, 0x21C, + 0x258, 0x2D0, 0x320 }, + + /* LG 20M */ + { 0x1A, 0x34, 0x4A, 0x68, 0x9C, 0xD0, 0xEA, 0x104, + 0x138, 0x00 }, + + /* SG 20M */ + { 0x1D, 0x3A, 0x57, 0x74, 0xAE, 0xE6, 0x104, 0x121, + 0x15B, 0x00 }, + }; + u32 rate = 0; + u8 mcs_index = 0; + u8 bw = 0; + u8 gi = 0; + + if ((ht_info & 0x3) == MWIFIEX_RATE_FORMAT_VHT) { + mcs_index = min(index & 0xF, 9); + + /* 20M: bw=0, 40M: bw=1, 80M: bw=2, 160M: bw=3 */ + bw = (ht_info & 0xC) >> 2; + + /* LGI: gi =0, SGI: gi = 1 */ + gi = (ht_info & 0x10) >> 4; + + if ((index >> 4) == 1) /* NSS = 2 */ + rate = ac_mcs_rate_nss2[2 * (3 - bw) + gi][mcs_index]; + else /* NSS = 1 */ + rate = ac_mcs_rate_nss1[2 * (3 - bw) + gi][mcs_index]; + } else if ((ht_info & 0x3) == MWIFIEX_RATE_FORMAT_HT) { + /* 20M: bw=0, 40M: bw=1 */ + bw = (ht_info & 0xC) >> 2; + + /* LGI: gi =0, SGI: gi = 1 */ + gi = (ht_info & 0x10) >> 4; + + if (index == MWIFIEX_RATE_BITMAP_MCS0) { + if (gi == 1) + rate = 0x0D; /* MCS 32 SGI rate */ + else + rate = 0x0C; /* MCS 32 LGI rate */ + } else if (index < 16) { + if ((bw == 1) || (bw == 0)) + rate = mcs_rate[2 * (1 - bw) + gi][index]; + else + rate = mwifiex_data_rates[0]; + } else { + rate = mwifiex_data_rates[0]; + } + } else { + /* 11n non-HT rates */ + if (index >= MWIFIEX_SUPPORTED_RATES_EXT) + index = 0; + rate = mwifiex_data_rates[index]; + } + + return rate; +} + +/* This function maps an index in supported rates table into + * the corresponding data rate. + */ +u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv, + u8 index, u8 ht_info) +{ + /* For every mcs_rate line, the first 8 bytes are for stream 1x1, + * and all 16 bytes are for stream 2x2. + */ + u16 mcs_rate[4][16] = { + /* LGI 40M */ + { 0x1b, 0x36, 0x51, 0x6c, 0xa2, 0xd8, 0xf3, 0x10e, + 0x36, 0x6c, 0xa2, 0xd8, 0x144, 0x1b0, 0x1e6, 0x21c }, + + /* SGI 40M */ + { 0x1e, 0x3c, 0x5a, 0x78, 0xb4, 0xf0, 0x10e, 0x12c, + 0x3c, 0x78, 0xb4, 0xf0, 0x168, 0x1e0, 0x21c, 0x258 }, + + /* LGI 20M */ + { 0x0d, 0x1a, 0x27, 0x34, 0x4e, 0x68, 0x75, 0x82, + 0x1a, 0x34, 0x4e, 0x68, 0x9c, 0xd0, 0xea, 0x104 }, + + /* SGI 20M */ + { 0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90, + 0x1c, 0x39, 0x56, 0x73, 0xad, 0xe7, 0x104, 0x120 } + }; u32 mcs_num_supp = (priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2) ? 16 : 8; u32 rate; + if (priv->adapter->is_hw_11ac_capable) + return mwifiex_index_to_acs_data_rate(priv, index, ht_info); + if (ht_info & BIT(0)) { if (index == MWIFIEX_RATE_BITMAP_MCS0) { if (ht_info & BIT(2)) @@ -269,6 +414,7 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) { u32 k = 0; struct mwifiex_adapter *adapter = priv->adapter; + if (priv->bss_mode == NL80211_IFTYPE_STATION) { switch (adapter->config_bands) { case BAND_B: @@ -279,6 +425,7 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) break; case BAND_G: case BAND_G | BAND_GN: + case BAND_G | BAND_GN | BAND_GAC: dev_dbg(adapter->dev, "info: infra band=%d " "supported_rates_g\n", adapter->config_bands); k = mwifiex_copy_rates(rates, k, supported_rates_g, @@ -288,7 +435,11 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) case BAND_A | BAND_B | BAND_G: case BAND_A | BAND_B: case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN: + case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN | BAND_AAC: + case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN | + BAND_AAC | BAND_GAC: case BAND_B | BAND_G | BAND_GN: + case BAND_B | BAND_G | BAND_GN | BAND_GAC: dev_dbg(adapter->dev, "info: infra band=%d " "supported_rates_bg\n", adapter->config_bands); k = mwifiex_copy_rates(rates, k, supported_rates_bg, @@ -301,14 +452,18 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) k = mwifiex_copy_rates(rates, k, supported_rates_a, sizeof(supported_rates_a)); break; + case BAND_AN: case BAND_A | BAND_AN: + case BAND_A | BAND_AN | BAND_AAC: case BAND_A | BAND_G | BAND_AN | BAND_GN: + case BAND_A | BAND_G | BAND_AN | BAND_GN | BAND_AAC: dev_dbg(adapter->dev, "info: infra band=%d " "supported_rates_a\n", adapter->config_bands); k = mwifiex_copy_rates(rates, k, supported_rates_a, sizeof(supported_rates_a)); break; case BAND_GN: + case BAND_GN | BAND_GAC: dev_dbg(adapter->dev, "info: infra band=%d " "supported_rates_n\n", adapter->config_bands); k = mwifiex_copy_rates(rates, k, supported_rates_n, diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 5f438e6..5019f1f 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -24,6 +24,7 @@ #include "main.h" #include "wmm.h" #include "11n.h" +#include "11ac.h" /* * This function initializes a command node. @@ -1470,6 +1471,24 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv, adapter->fw_release_number = le32_to_cpu(hw_spec->fw_release_number); adapter->number_of_antenna = le16_to_cpu(hw_spec->number_of_antenna); + if (le32_to_cpu(hw_spec->dot_11ac_dev_cap)) { + adapter->is_hw_11ac_capable = true; + + /* Copy 11AC cap */ + adapter->hw_dot_11ac_dev_cap = + le32_to_cpu(hw_spec->dot_11ac_dev_cap); + adapter->usr_dot_11ac_dev_cap_bg = adapter->hw_dot_11ac_dev_cap; + adapter->usr_dot_11ac_dev_cap_a = adapter->hw_dot_11ac_dev_cap; + + /* Copy 11AC mcs */ + adapter->hw_dot_11ac_mcs_support = + le32_to_cpu(hw_spec->dot_11ac_mcs_support); + adapter->usr_dot_11ac_mcs_support = + adapter->hw_dot_11ac_mcs_support; + } else { + adapter->is_hw_11ac_capable = false; + } + dev_dbg(adapter->dev, "info: GET_HW_SPEC: fw_release_number- %#x\n", adapter->fw_release_number); dev_dbg(adapter->dev, "info: GET_HW_SPEC: permanent addr: %pM\n", diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index ebe2f6a..25acb06 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -49,13 +49,23 @@ struct tx_packet_hdr { #define A_SUPPORTED_RATES 9 #define HOSTCMD_SUPPORTED_RATES 14 #define N_SUPPORTED_RATES 3 -#define ALL_802_11_BANDS (BAND_A | BAND_B | BAND_G | BAND_GN) +#define ALL_802_11_BANDS (BAND_A | BAND_B | BAND_G | BAND_GN | \ + BAND_AN | BAND_GAC | BAND_AAC) -#define FW_MULTI_BANDS_SUPPORT (BIT(8) | BIT(9) | BIT(10) | BIT(11)) +#define FW_MULTI_BANDS_SUPPORT (BIT(8) | BIT(9) | BIT(10) | BIT(11) | \ + BIT(12) | BIT(13)) #define IS_SUPPORT_MULTI_BANDS(adapter) \ (adapter->fw_cap_info & FW_MULTI_BANDS_SUPPORT) + +/* shift bit 12 and bit 13 in fw_cap_info from the firmware to bit 13 and 14 + * for 11ac so that bit 11 is for GN, bit 12 for AN, bit 13 for GAC, and bit + * bit 14 for AAC, in order to be compatible with the band capability + * defined in the driver after right shift of 8 bits. + */ #define GET_FW_DEFAULT_BANDS(adapter) \ - ((adapter->fw_cap_info >> 8) & ALL_802_11_BANDS) + (((((adapter->fw_cap_info & 0x3000) << 1) | \ + (adapter->fw_cap_info & ~0xF000)) >> 8) & \ + ALL_802_11_BANDS) #define HostCmd_WEP_KEY_INDEX_MASK 0x3fff @@ -216,6 +226,47 @@ enum MWIFIEX_802_11_PRIVACY_FILTER { #define LLC_SNAP_LEN 8 +/* HW_SPEC fw_cap_info */ + +#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(13)|BIT(14))) + +#define GET_VHTCAP_MAXMPDULEN(vht_cap_info) (vht_cap_info & 0x3) +#define GET_VHTCAP_CHWDSET(vht_cap_info) ((vht_cap_info >> 2) & 0x3) +#define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3) +#define SET_VHTNSSMCS(mcs_mapset, nss, value) (mcs_mapset |= (value & 0x3) << \ + (2 * (nss - 1))) +#define NO_NSS_SUPPORT 0x3 + +/* HW_SPEC: HTC-VHT supported */ +#define ISSUPP_11ACVHTHTCVHT(Dot11acDevCap) (Dot11acDevCap & BIT(22)) +/* HW_SPEC: VHT TXOP PS support */ +#define ISSUPP_11ACVHTTXOPPS(Dot11acDevCap) (Dot11acDevCap & BIT(21)) +/* HW_SPEC: MU RX beamformee support */ +#define ISSUPP_11ACMURXBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(20)) +/* HW_SPEC: MU TX beamformee support */ +#define ISSUPP_11ACMUTXBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(19)) +/* HW_SPEC: SU Beamformee support */ +#define ISSUPP_11ACSUBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(10)) +/* HW_SPEC: SU Beamformer support */ +#define ISSUPP_11ACSUBEAMFORMER(Dot11acDevCap) (Dot11acDevCap & BIT(9)) +/* HW_SPEC: Rx STBC support */ +#define ISSUPP_11ACRXSTBC(Dot11acDevCap) (Dot11acDevCap & BIT(8)) +/* HW_SPEC: Tx STBC support */ +#define ISSUPP_11ACTXSTBC(Dot11acDevCap) (Dot11acDevCap & BIT(7)) +/* HW_SPEC: Short GI support for 160MHz BW */ +#define ISSUPP_11ACSGI160(Dot11acDevCap) (Dot11acDevCap & BIT(6)) +/* HW_SPEC: Short GI support for 80MHz BW */ +#define ISSUPP_11ACSGI80(Dot11acDevCap) (Dot11acDevCap & BIT(5)) +/* HW_SPEC: LDPC coding support */ +#define ISSUPP_11ACLDPC(Dot11acDevCap) (Dot11acDevCap & BIT(4)) +/* HW_SPEC: Channel BW 20/40/80/160/80+80 MHz support */ +#define ISSUPP_11ACBW8080(Dot11acDevCap) (Dot11acDevCap & BIT(3)) +/* HW_SPEC: Channel BW 20/40/80/160 MHz support */ +#define ISSUPP_11ACBW160(Dot11acDevCap) (Dot11acDevCap & BIT(2)) + +#define GET_DEVTXMCSMAP(dev_mcs_map) (dev_mcs_map >> 16) +#define GET_DEVRXMCSMAP(dev_mcs_map) (dev_mcs_map & 0xFFFF) + #define MOD_CLASS_HR_DSSS 0x03 #define MOD_CLASS_OFDM 0x07 #define MOD_CLASS_HT 0x08 @@ -455,9 +506,22 @@ struct rxpd { u8 rx_rate; s8 snr; s8 nf; - /* Ht Info [Bit 0] RxRate format: LG=0, HT=1 + + /* For: Non-802.11 AC cards + * + * Ht Info [Bit 0] RxRate format: LG=0, HT=1 * [Bit 1] HT Bandwidth: BW20 = 0, BW40 = 1 - * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 */ + * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 + * + * For: 802.11 AC cards + * [Bit 1] [Bit 0] RxRate format: legacy rate = 00 HT = 01 VHT = 10 + * [Bit 3] [Bit 2] HT/VHT Bandwidth BW20 = 00 BW40 = 01 + * BW80 = 10 BW160 = 11 + * [Bit 4] HT/VHT Guard interval LGI = 0 SGI = 1 + * [Bit 5] STBC support Enabled = 1 + * [Bit 6] LDPC support Enabled = 1 + * [Bit 7] Reserved + */ u8 ht_info; u8 reserved; } __packed; @@ -680,7 +744,11 @@ struct host_cmd_ds_get_hw_spec { __le32 dot_11n_dev_cap; u8 dev_mcs_support; __le16 mp_end_port; /* SDIO only, reserved for other interfacces */ - __le16 reserved_4; + __le16 mgmt_buf_count; /* mgmt IE buffer count */ + __le32 reserved_5; + __le32 reserved_6; + __le32 dot_11ac_dev_cap; + __le32 dot_11ac_mcs_support; } __packed; struct host_cmd_ds_802_11_rssi_info { @@ -786,6 +854,12 @@ union ieee_types_phy_param_set { struct ieee_types_ds_param_set ds_param_set; } __packed; +struct ieee_types_oper_mode_ntf { + u8 element_id; + u8 len; + u8 oper_mode; +} __packed; + struct host_cmd_ds_802_11_ad_hoc_start { u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 bss_mode; @@ -846,11 +920,27 @@ struct host_cmd_ds_802_11_get_log { __le32 wep_icv_err_cnt[4]; }; +/* Enumeration for rate format */ +enum _mwifiex_rate_format { + MWIFIEX_RATE_FORMAT_LG = 0, + MWIFIEX_RATE_FORMAT_HT, + MWIFIEX_RATE_FORMAT_VHT, + MWIFIEX_RATE_FORMAT_AUTO = 0xFF, +}; + struct host_cmd_ds_tx_rate_query { u8 tx_rate; - /* Ht Info [Bit 0] RxRate format: LG=0, HT=1 + /* Tx Rate Info: For 802.11 AC cards + * + * [Bit 0-1] tx rate formate: LG = 0, HT = 1, VHT = 2 + * [Bit 2-3] HT/VHT Bandwidth: BW20 = 0, BW40 = 1, BW80 = 2, BW160 = 3 + * [Bit 4] HT/VHT Guard Interval: LGI = 0, SGI = 1 + * + * For non-802.11 AC cards + * Ht Info [Bit 0] RxRate format: LG=0, HT=1 * [Bit 1] HT Bandwidth: BW20 = 0, BW40 = 1 - * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 */ + * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 + */ u8 ht_info; } __packed; @@ -1096,6 +1186,7 @@ struct host_cmd_ds_11n_cfg { __le16 action; __le16 ht_tx_cap; __le16 ht_tx_info; + __le16 misc_config; /* Needed for 802.11AC cards only */ } __packed; struct host_cmd_ds_txbuf_cfg { @@ -1183,6 +1274,26 @@ struct mwifiex_ie_types_htcap { struct ieee80211_ht_cap ht_cap; } __packed; +struct mwifiex_ie_types_vhtcap { + struct mwifiex_ie_types_header header; + struct ieee80211_vht_cap vht_cap; +} __packed; + +struct mwifiex_ie_types_oper_mode_ntf { + struct mwifiex_ie_types_header header; + u8 oper_mode; +} __packed; + +/* VHT Operations IE */ +struct mwifiex_ie_types_vht_oper { + struct mwifiex_ie_types_header header; + u8 chan_width; + u8 chan_center_freq_1; + u8 chan_center_freq_2; + /* Basic MCS set map, each 2 bits stands for a NSS */ + u16 basic_mcs_map; +} __packed; + struct mwifiex_ie_types_wmmcap { struct mwifiex_ie_types_header header; struct mwifiex_types_wmm_info wmm_info; diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h index f3d9d04..d85e6eb 100644 --- a/drivers/net/wireless/mwifiex/ioctl.h +++ b/drivers/net/wireless/mwifiex/ioctl.h @@ -60,6 +60,8 @@ enum { BAND_A = 4, BAND_GN = 8, BAND_AN = 16, + BAND_GAC = 32, + BAND_AAC = 64, }; #define MWIFIEX_WPA_PASSHPHRASE_LEN 64 @@ -103,6 +105,7 @@ struct mwifiex_uap_bss_param { struct wpa_param wpa_cfg; struct wep_key wep_cfg[NUM_WEP_KEYS]; struct ieee80211_ht_cap ht_cap; + struct ieee80211_vht_cap vht_cap; u8 rates[MWIFIEX_SUPPORTED_RATES]; u32 sta_ao_timer; u32 ps_sta_ao_timer; @@ -272,6 +275,7 @@ struct mwifiex_ds_pm_cfg { struct mwifiex_ds_11n_tx_cfg { u16 tx_htcap; u16 tx_htinfo; + u16 misc_config; /* Needed for 802.11AC cards only */ }; struct mwifiex_ds_11n_amsdu_aggr_ctrl { diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index a537297..246aa62 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -24,6 +24,7 @@ #include "main.h" #include "wmm.h" #include "11n.h" +#include "11ac.h" #define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9))) @@ -512,6 +513,12 @@ int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv, priv->adapter->config_bands & BAND_AN)) mwifiex_cmd_append_11n_tlv(priv, bss_desc, &pos); + if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) && + !bss_desc->disable_11n && !bss_desc->disable_11ac && + (priv->adapter->config_bands & BAND_GAC || + priv->adapter->config_bands & BAND_AAC)) + mwifiex_cmd_append_11ac_tlv(priv, bss_desc, &pos); + /* Append vendor specific IE TLV */ mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_ASSOC, &pos); @@ -1421,6 +1428,7 @@ mwifiex_band_to_radio_type(u8 band) case BAND_A: case BAND_AN: case BAND_A | BAND_AN: + case BAND_A | BAND_AN | BAND_AAC: return HostCmd_SCAN_RADIO_TYPE_A; case BAND_B: case BAND_G: diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index ac799a0..553adfb 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -295,6 +295,13 @@ struct mwifiex_bssdescriptor { u16 bss_co_2040_offset; u8 *bcn_ext_cap; u16 ext_cap_offset; + struct ieee80211_vht_cap *bcn_vht_cap; + u16 vht_cap_offset; + struct ieee80211_vht_operation *bcn_vht_oper; + u16 vht_info_offset; + struct ieee_types_oper_mode_ntf *oper_mode; + u16 oper_mode_offset; + u8 disable_11ac; struct ieee_types_vendor_specific *bcn_wpa_ie; u16 wpa_offset; struct ieee_types_generic *bcn_rsn_ie; @@ -499,6 +506,7 @@ struct mwifiex_private { u16 rsn_idx; struct timer_list scan_delay_timer; u8 ap_11n_enabled; + u8 ap_11ac_enabled; u32 mgmt_frame_mask; struct mwifiex_roc_cfg roc_cfg; }; @@ -722,6 +730,15 @@ struct mwifiex_adapter { u16 max_mgmt_ie_index; u8 scan_delay_cnt; u8 empty_tx_q_cnt; + + /* 11AC */ + u32 is_hw_11ac_capable; + u32 hw_dot_11ac_dev_cap; + u32 hw_dot_11ac_mcs_support; + u32 usr_dot_11ac_dev_cap_bg; + u32 usr_dot_11ac_dev_cap_a; + u32 usr_dot_11ac_mcs_support; + atomic_t is_tx_received; atomic_t pending_bridged_pkts; }; @@ -864,8 +881,10 @@ int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv, int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command *cmd); struct mwifiex_chan_freq_power *mwifiex_get_cfp(struct mwifiex_private *priv, u8 band, u16 channel, u32 freq); -u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv, u8 index, - u8 ht_info); +u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv, + u8 index, u8 ht_info); +u32 mwifiex_index_to_acs_data_rate(struct mwifiex_private *priv, + u8 index, u8 ht_info); u32 mwifiex_find_freq_from_band_chan(u8, u8); int mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv, u16 vsie_mask, u8 **buffer); diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index e275aec..db4d5ae 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1250,6 +1250,23 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter, sizeof(struct ieee_types_header) - bss_entry->beacon_buf); break; + case WLAN_EID_VHT_CAPABILITY: + bss_entry->disable_11ac = false; + bss_entry->bcn_vht_cap = + (void *)(current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->vht_cap_offset = + (u16)((u8 *)bss_entry->bcn_vht_cap - + bss_entry->beacon_buf); + break; + case WLAN_EID_VHT_OPERATION: + bss_entry->bcn_vht_oper = + (void *)(current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->vht_info_offset = + (u16)((u8 *)bss_entry->bcn_vht_oper - + bss_entry->beacon_buf); + break; case WLAN_EID_BSS_COEX_2040: bss_entry->bcn_bss_co_2040 = current_ptr + sizeof(struct ieee_types_header); @@ -1264,6 +1281,14 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter, sizeof(struct ieee_types_header) - bss_entry->beacon_buf); break; + case WLAN_EID_OPMODE_NOTIF: + bss_entry->oper_mode = + (void *)(current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->oper_mode_offset = + (u16)((u8 *)bss_entry->oper_mode - + bss_entry->beacon_buf); + break; default: break; } @@ -1494,6 +1519,17 @@ static int mwifiex_update_curr_bss_params(struct mwifiex_private *priv, priv->curr_bss_params.bss_descriptor.ext_cap_offset = 0; priv->curr_bss_params.bss_descriptor.beacon_buf = NULL; priv->curr_bss_params.bss_descriptor.beacon_buf_size = 0; + priv->curr_bss_params.bss_descriptor.bcn_vht_cap = NULL; + priv->curr_bss_params.bss_descriptor.vht_cap_offset = 0; + priv->curr_bss_params.bss_descriptor.bcn_vht_oper = NULL; + priv->curr_bss_params.bss_descriptor.vht_info_offset = 0; + priv->curr_bss_params.bss_descriptor.oper_mode = NULL; + priv->curr_bss_params.bss_descriptor.oper_mode_offset = 0; + + /* Disable 11ac by default. Enable it only where there + * exist VHT_CAP IE in AP beacon + */ + priv->curr_bss_params.bss_descriptor.disable_11ac = true; /* Make a copy of current BSSID descriptor */ memcpy(&priv->curr_bss_params.bss_descriptor, bss_desc, @@ -2028,6 +2064,14 @@ mwifiex_save_curr_bcn(struct mwifiex_private *priv) (curr_bss->beacon_buf + curr_bss->ht_info_offset); + if (curr_bss->bcn_vht_cap) + curr_bss->bcn_ht_cap = (void *)(curr_bss->beacon_buf + + curr_bss->vht_cap_offset); + + if (curr_bss->bcn_vht_oper) + curr_bss->bcn_ht_oper = (void *)(curr_bss->beacon_buf + + curr_bss->vht_info_offset); + if (curr_bss->bcn_bss_co_2040) curr_bss->bcn_bss_co_2040 = (curr_bss->beacon_buf + curr_bss->bss_co_2040_offset); @@ -2035,6 +2079,10 @@ mwifiex_save_curr_bcn(struct mwifiex_private *priv) if (curr_bss->bcn_ext_cap) curr_bss->bcn_ext_cap = curr_bss->beacon_buf + curr_bss->ext_cap_offset; + + if (curr_bss->oper_mode) + curr_bss->oper_mode = (void *)(curr_bss->beacon_buf + + curr_bss->oper_mode_offset); } /* diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c index c460785..c55c5bb 100644 --- a/drivers/net/wireless/mwifiex/sta_cmd.c +++ b/drivers/net/wireless/mwifiex/sta_cmd.c @@ -1230,7 +1230,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no, data_buf); break; case HostCmd_CMD_11N_CFG: - ret = mwifiex_cmd_11n_cfg(cmd_ptr, cmd_action, data_buf); + ret = mwifiex_cmd_11n_cfg(priv, cmd_ptr, cmd_action, data_buf); break; case HostCmd_CMD_WMM_GET_STATUS: dev_dbg(priv->adapter->dev, diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c index 8470564..4669f8d 100644 --- a/drivers/net/wireless/mwifiex/sta_cmdresp.c +++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c @@ -24,6 +24,7 @@ #include "main.h" #include "wmm.h" #include "11n.h" +#include "11ac.h" /* diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 0d01846..7ce72e9 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -283,9 +283,10 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (mwifiex_band_to_radio_type((u8) bss_desc->bss_band) == HostCmd_SCAN_RADIO_TYPE_BG) - config_bands = BAND_B | BAND_G | BAND_GN; + config_bands = BAND_B | BAND_G | BAND_GN | + BAND_GAC; else - config_bands = BAND_A | BAND_AN; + config_bands = BAND_A | BAND_AN | BAND_AAC; if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands)) -- cgit v0.10.2 From bc6b89237acb3dee6af6e64e51a18255fef89cc2 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 18 Feb 2013 10:29:30 +0200 Subject: rtlwifi: usb: allocate URB control message setup_packet and data buffer separately rtlwifi allocates both setup_packet and data buffer of control message urb, using shared kmalloc in _usbctrl_vendorreq_async_write. Structure used for allocating is: struct { u8 data[254]; struct usb_ctrlrequest dr; }; Because 'struct usb_ctrlrequest' is __packed, setup packet is unaligned and DMA mapping of both 'data' and 'dr' confuses ARM/sunxi, leading to memory corruptions and freezes. Patch changes setup packet to be allocated separately. [v2]: - Use WARN_ON_ONCE instead of WARN_ON Cc: Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 476eaef..156b527 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -42,8 +42,12 @@ static void usbctrl_async_callback(struct urb *urb) { - if (urb) - kfree(urb->context); + if (urb) { + /* free dr */ + kfree(urb->setup_packet); + /* free databuf */ + kfree(urb->transfer_buffer); + } } static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request, @@ -55,39 +59,47 @@ static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request, u8 reqtype; struct usb_ctrlrequest *dr; struct urb *urb; - struct rtl819x_async_write_data { - u8 data[REALTEK_USB_VENQT_MAX_BUF_SIZE]; - struct usb_ctrlrequest dr; - } *buf; + const u16 databuf_maxlen = REALTEK_USB_VENQT_MAX_BUF_SIZE; + u8 *databuf; + + if (WARN_ON_ONCE(len > databuf_maxlen)) + len = databuf_maxlen; pipe = usb_sndctrlpipe(udev, 0); /* write_out */ reqtype = REALTEK_USB_VENQT_WRITE; - buf = kmalloc(sizeof(*buf), GFP_ATOMIC); - if (!buf) + dr = kmalloc(sizeof(*dr), GFP_ATOMIC); + if (!dr) return -ENOMEM; + databuf = kmalloc(databuf_maxlen, GFP_ATOMIC); + if (!databuf) { + kfree(dr); + return -ENOMEM; + } + urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - kfree(buf); + kfree(databuf); + kfree(dr); return -ENOMEM; } - dr = &buf->dr; - dr->bRequestType = reqtype; dr->bRequest = request; dr->wValue = cpu_to_le16(value); dr->wIndex = cpu_to_le16(index); dr->wLength = cpu_to_le16(len); /* data are already in little-endian order */ - memcpy(buf, pdata, len); + memcpy(databuf, pdata, len); usb_fill_control_urb(urb, udev, pipe, - (unsigned char *)dr, buf, len, - usbctrl_async_callback, buf); + (unsigned char *)dr, databuf, len, + usbctrl_async_callback, NULL); rc = usb_submit_urb(urb, GFP_ATOMIC); - if (rc < 0) - kfree(buf); + if (rc < 0) { + kfree(databuf); + kfree(dr); + } usb_free_urb(urb); return rc; } -- cgit v0.10.2 From 488ec878034eccb852267b0e27ce9d511f75c587 Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Mon, 18 Feb 2013 03:37:44 -0800 Subject: net: wireless: orinoco: orinoco_usb.c: fix DMA buffers on stack This patch fixes an instance of DMA buffer on stack(being passed to usb_control_msg) for the wireless USB version of the Agere Orinoco card driver. It also fixes the missing audit for the return value of firmware download routine. Found using smatch. Signed-off-by: Kumar Amit Mehta Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index 01624dc..7744f42 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -804,10 +804,15 @@ static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset) static int ezusb_firmware_download(struct ezusb_priv *upriv, struct ez_usb_fw *fw) { - u8 fw_buffer[FW_BUF_SIZE]; + u8 *fw_buffer; int retval, addr; int variant_offset; + fw_buffer = kmalloc(FW_BUF_SIZE, GFP_KERNEL); + if (!fw_buffer) { + printk(KERN_ERR PFX "Out of memory for firmware buffer.\n"); + return -ENOMEM; + } /* * This byte is 1 and should be replaced with 0. The offset is * 0x10AD in version 0.0.6. The byte in question should follow @@ -859,6 +864,7 @@ static int ezusb_firmware_download(struct ezusb_priv *upriv, printk(KERN_ERR PFX "Firmware download failed, error %d\n", retval); exit: + kfree(fw_buffer); return retval; } @@ -1681,7 +1687,8 @@ static int ezusb_probe(struct usb_interface *interface, firmware.code = fw_entry->data; } if (firmware.size && firmware.code) { - ezusb_firmware_download(upriv, &firmware); + if (ezusb_firmware_download(upriv, &firmware)) + goto error; } else { err("No firmware to download"); goto error; -- cgit v0.10.2 From b53cf458ea20dd7f5e32611366f63728e40c9021 Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Mon, 18 Feb 2013 04:13:44 -0800 Subject: net: wireless: hostap: hostap_ap.c: Return -ENOMEM instead of -1 for if kmalloc() fails. When memory allocation using, kmalloc() fails, report appropriate error value. Signed-off-by: Kumar Amit Mehta Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index c6ea995..dd9a18f 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -376,7 +376,7 @@ int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac) entry = kmalloc(sizeof(struct mac_entry), GFP_KERNEL); if (entry == NULL) - return -1; + return -ENOMEM; memcpy(entry->addr, mac, ETH_ALEN); -- cgit v0.10.2 From b20ab9cc63ca4605aec154cf54faa8455749f3f6 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 10 Feb 2013 18:56:56 +0100 Subject: netfilter: nf_ct_helper: better logging for dropped packets Connection tracking helpers have to drop packets under exceptional situations. Currently, the user gets the following logging message in case that happens: nf_ct_%s: dropping packet ... However, depending on the helper, there are different reasons why a packet can be dropped. This patch modifies the existing code to provide more specific error message in the scope of each helper to help users to debug the reason why the packet has been dropped, ie: nf_ct_%s: dropping packet: reason ... Thanks to Joe Perches for many formatting suggestions. Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h index ce27edf..26c4ae5 100644 --- a/include/net/netfilter/nf_conntrack_helper.h +++ b/include/net/netfilter/nf_conntrack_helper.h @@ -100,6 +100,10 @@ struct nf_ct_helper_expectfn { void (*expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp); }; +__printf(3,4) +void nf_ct_helper_log(struct sk_buff *skb, const struct nf_conn *ct, + const char *fmt, ...); + void nf_ct_helper_expectfn_register(struct nf_ct_helper_expectfn *n); void nf_ct_helper_expectfn_unregister(struct nf_ct_helper_expectfn *n); struct nf_ct_helper_expectfn * diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index 48990ad..2820aa1 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -100,7 +100,6 @@ static unsigned int ipv4_helper(unsigned int hooknum, enum ip_conntrack_info ctinfo; const struct nf_conn_help *help; const struct nf_conntrack_helper *helper; - unsigned int ret; /* This is where we call the helper: as the packet goes out. */ ct = nf_ct_get(skb, &ctinfo); @@ -116,13 +115,8 @@ static unsigned int ipv4_helper(unsigned int hooknum, if (!helper) return NF_ACCEPT; - ret = helper->help(skb, skb_network_offset(skb) + ip_hdrlen(skb), - ct, ctinfo); - if (ret != NF_ACCEPT && (ret & NF_VERDICT_MASK) != NF_QUEUE) { - nf_log_packet(NFPROTO_IPV4, hooknum, skb, in, out, NULL, - "nf_ct_%s: dropping packet", helper->name); - } - return ret; + return helper->help(skb, skb_network_offset(skb) + ip_hdrlen(skb), + ct, ctinfo); } static unsigned int ipv4_confirm(unsigned int hooknum, diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c index 8a45bb2..2b6c226 100644 --- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c +++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c @@ -104,7 +104,6 @@ static unsigned int ipv6_helper(unsigned int hooknum, const struct nf_conn_help *help; const struct nf_conntrack_helper *helper; enum ip_conntrack_info ctinfo; - unsigned int ret; __be16 frag_off; int protoff; u8 nexthdr; @@ -130,12 +129,7 @@ static unsigned int ipv6_helper(unsigned int hooknum, return NF_ACCEPT; } - ret = helper->help(skb, protoff, ct, ctinfo); - if (ret != NF_ACCEPT && (ret & NF_VERDICT_MASK) != NF_QUEUE) { - nf_log_packet(NFPROTO_IPV6, hooknum, skb, in, out, NULL, - "nf_ct_%s: dropping packet", helper->name); - } - return ret; + return helper->help(skb, protoff, ct, ctinfo); } static unsigned int ipv6_confirm(unsigned int hooknum, diff --git a/net/netfilter/nf_conntrack_amanda.c b/net/netfilter/nf_conntrack_amanda.c index c514fe6..dbdaa11 100644 --- a/net/netfilter/nf_conntrack_amanda.c +++ b/net/netfilter/nf_conntrack_amanda.c @@ -145,6 +145,7 @@ static int amanda_help(struct sk_buff *skb, exp = nf_ct_expect_alloc(ct); if (exp == NULL) { + nf_ct_helper_log(skb, ct, "cannot alloc expectation"); ret = NF_DROP; goto out; } @@ -158,8 +159,10 @@ static int amanda_help(struct sk_buff *skb, if (nf_nat_amanda && ct->status & IPS_NAT_MASK) ret = nf_nat_amanda(skb, ctinfo, protoff, off - dataoff, len, exp); - else if (nf_ct_expect_related(exp) != 0) + else if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, ct, "cannot add expectation"); ret = NF_DROP; + } nf_ct_expect_put(exp); } diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c index 1ce3bef..62fb8fa 100644 --- a/net/netfilter/nf_conntrack_ftp.c +++ b/net/netfilter/nf_conntrack_ftp.c @@ -435,8 +435,8 @@ skip_nl_seq: connection tracking, not packet filtering. However, it is necessary for accurate tracking in this case. */ - pr_debug("conntrack_ftp: partial %s %u+%u\n", - search[dir][i].pattern, ntohl(th->seq), datalen); + nf_ct_helper_log(skb, ct, "partial matching of `%s'", + search[dir][i].pattern); ret = NF_DROP; goto out; } else if (found == 0) { /* No match */ @@ -450,6 +450,7 @@ skip_nl_seq: exp = nf_ct_expect_alloc(ct); if (exp == NULL) { + nf_ct_helper_log(skb, ct, "cannot alloc expectation"); ret = NF_DROP; goto out; } @@ -500,9 +501,10 @@ skip_nl_seq: protoff, matchoff, matchlen, exp); else { /* Can't expect this? Best to drop packet now. */ - if (nf_ct_expect_related(exp) != 0) + if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, ct, "cannot add expectation"); ret = NF_DROP; - else + } else ret = NF_ACCEPT; } diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 962795e..7df7b36 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -623,7 +623,7 @@ static int h245_help(struct sk_buff *skb, unsigned int protoff, drop: spin_unlock_bh(&nf_h323_lock); - net_info_ratelimited("nf_ct_h245: packet dropped\n"); + nf_ct_helper_log(skb, ct, "cannot process H.245 message"); return NF_DROP; } @@ -1197,7 +1197,7 @@ static int q931_help(struct sk_buff *skb, unsigned int protoff, drop: spin_unlock_bh(&nf_h323_lock); - net_info_ratelimited("nf_ct_q931: packet dropped\n"); + nf_ct_helper_log(skb, ct, "cannot process Q.931 message"); return NF_DROP; } @@ -1795,7 +1795,7 @@ static int ras_help(struct sk_buff *skb, unsigned int protoff, drop: spin_unlock_bh(&nf_h323_lock); - net_info_ratelimited("nf_ct_ras: packet dropped\n"); + nf_ct_helper_log(skb, ct, "cannot process RAS message"); return NF_DROP; } diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 2f380f7..c08768d 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -28,6 +28,7 @@ #include #include #include +#include static DEFINE_MUTEX(nf_ct_helper_mutex); struct hlist_head *nf_ct_helper_hash __read_mostly; @@ -332,6 +333,24 @@ nf_ct_helper_expectfn_find_by_symbol(const void *symbol) } EXPORT_SYMBOL_GPL(nf_ct_helper_expectfn_find_by_symbol); +__printf(3, 4) +void nf_ct_helper_log(struct sk_buff *skb, const struct nf_conn *ct, + const char *fmt, ...) +{ + const struct nf_conn_help *help; + const struct nf_conntrack_helper *helper; + + /* Called from the helper function, this call never fails */ + help = nfct_help(ct); + + /* rcu_read_lock()ed by nf_hook_slow */ + helper = rcu_dereference(help->helper); + + nf_log_packet(nf_ct_l3num(ct), 0, skb, NULL, NULL, NULL, + "nf_ct_%s: dropping packet: %s ", helper->name, fmt); +} +EXPORT_SYMBOL_GPL(nf_ct_helper_log); + int nf_conntrack_helper_register(struct nf_conntrack_helper *me) { int ret = 0; diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c index 3b20aa7..70985c5 100644 --- a/net/netfilter/nf_conntrack_irc.c +++ b/net/netfilter/nf_conntrack_irc.c @@ -194,6 +194,8 @@ static int help(struct sk_buff *skb, unsigned int protoff, exp = nf_ct_expect_alloc(ct); if (exp == NULL) { + nf_ct_helper_log(skb, ct, + "cannot alloc expectation"); ret = NF_DROP; goto out; } @@ -210,8 +212,11 @@ static int help(struct sk_buff *skb, unsigned int protoff, addr_beg_p - ib_ptr, addr_end_p - addr_beg_p, exp); - else if (nf_ct_expect_related(exp) != 0) + else if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, ct, + "cannot add expectation"); ret = NF_DROP; + } nf_ct_expect_put(exp); goto out; } diff --git a/net/netfilter/nf_conntrack_sane.c b/net/netfilter/nf_conntrack_sane.c index 295429f..4a2134f 100644 --- a/net/netfilter/nf_conntrack_sane.c +++ b/net/netfilter/nf_conntrack_sane.c @@ -138,6 +138,7 @@ static int help(struct sk_buff *skb, exp = nf_ct_expect_alloc(ct); if (exp == NULL) { + nf_ct_helper_log(skb, ct, "cannot alloc expectation"); ret = NF_DROP; goto out; } @@ -151,8 +152,10 @@ static int help(struct sk_buff *skb, nf_ct_dump_tuple(&exp->tuple); /* Can't expect this? Best to drop packet now. */ - if (nf_ct_expect_related(exp) != 0) + if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, ct, "cannot add expectation"); ret = NF_DROP; + } nf_ct_expect_put(exp); diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 72a67bb..069229d 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1095,8 +1095,10 @@ static int process_sdp(struct sk_buff *skb, unsigned int protoff, port = simple_strtoul(*dptr + mediaoff, NULL, 10); if (port == 0) continue; - if (port < 1024 || port > 65535) + if (port < 1024 || port > 65535) { + nf_ct_helper_log(skb, ct, "wrong port %u", port); return NF_DROP; + } /* The media description overrides the session description. */ maddr_len = 0; @@ -1107,15 +1109,20 @@ static int process_sdp(struct sk_buff *skb, unsigned int protoff, memcpy(&rtp_addr, &maddr, sizeof(rtp_addr)); } else if (caddr_len) memcpy(&rtp_addr, &caddr, sizeof(rtp_addr)); - else + else { + nf_ct_helper_log(skb, ct, "cannot parse SDP message"); return NF_DROP; + } ret = set_expected_rtp_rtcp(skb, protoff, dataoff, dptr, datalen, &rtp_addr, htons(port), t->class, mediaoff, medialen); - if (ret != NF_ACCEPT) + if (ret != NF_ACCEPT) { + nf_ct_helper_log(skb, ct, + "cannot add expectation for voice"); return ret; + } /* Update media connection address if present */ if (maddr_len && nf_nat_sdp_addr && ct->status & IPS_NAT_MASK) { @@ -1123,8 +1130,10 @@ static int process_sdp(struct sk_buff *skb, unsigned int protoff, dptr, datalen, mediaoff, SDP_HDR_CONNECTION, SDP_HDR_MEDIA, &rtp_addr); - if (ret != NF_ACCEPT) + if (ret != NF_ACCEPT) { + nf_ct_helper_log(skb, ct, "cannot mangle SDP"); return ret; + } } i++; } @@ -1258,9 +1267,10 @@ static int process_register_request(struct sk_buff *skb, unsigned int protoff, ret = ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen, SIP_HDR_CONTACT, NULL, &matchoff, &matchlen, &daddr, &port); - if (ret < 0) + if (ret < 0) { + nf_ct_helper_log(skb, ct, "cannot parse contact"); return NF_DROP; - else if (ret == 0) + } else if (ret == 0) return NF_ACCEPT; /* We don't support third-party registrations */ @@ -1273,8 +1283,10 @@ static int process_register_request(struct sk_buff *skb, unsigned int protoff, if (ct_sip_parse_numerical_param(ct, *dptr, matchoff + matchlen, *datalen, - "expires=", NULL, NULL, &expires) < 0) + "expires=", NULL, NULL, &expires) < 0) { + nf_ct_helper_log(skb, ct, "cannot parse expires"); return NF_DROP; + } if (expires == 0) { ret = NF_ACCEPT; @@ -1282,8 +1294,10 @@ static int process_register_request(struct sk_buff *skb, unsigned int protoff, } exp = nf_ct_expect_alloc(ct); - if (!exp) + if (!exp) { + nf_ct_helper_log(skb, ct, "cannot alloc expectation"); return NF_DROP; + } saddr = NULL; if (sip_direct_signalling) @@ -1300,9 +1314,10 @@ static int process_register_request(struct sk_buff *skb, unsigned int protoff, ret = nf_nat_sip_expect(skb, protoff, dataoff, dptr, datalen, exp, matchoff, matchlen); else { - if (nf_ct_expect_related(exp) != 0) + if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, ct, "cannot add expectation"); ret = NF_DROP; - else + } else ret = NF_ACCEPT; } nf_ct_expect_put(exp); @@ -1356,9 +1371,10 @@ static int process_register_response(struct sk_buff *skb, unsigned int protoff, SIP_HDR_CONTACT, &in_contact, &matchoff, &matchlen, &addr, &port); - if (ret < 0) + if (ret < 0) { + nf_ct_helper_log(skb, ct, "cannot parse contact"); return NF_DROP; - else if (ret == 0) + } else if (ret == 0) break; /* We don't support third-party registrations */ @@ -1373,8 +1389,10 @@ static int process_register_response(struct sk_buff *skb, unsigned int protoff, matchoff + matchlen, *datalen, "expires=", NULL, NULL, &c_expires); - if (ret < 0) + if (ret < 0) { + nf_ct_helper_log(skb, ct, "cannot parse expires"); return NF_DROP; + } if (c_expires == 0) break; if (refresh_signalling_expectation(ct, &addr, proto, port, @@ -1408,15 +1426,21 @@ static int process_sip_response(struct sk_buff *skb, unsigned int protoff, if (*datalen < strlen("SIP/2.0 200")) return NF_ACCEPT; code = simple_strtoul(*dptr + strlen("SIP/2.0 "), NULL, 10); - if (!code) + if (!code) { + nf_ct_helper_log(skb, ct, "cannot get code"); return NF_DROP; + } if (ct_sip_get_header(ct, *dptr, 0, *datalen, SIP_HDR_CSEQ, - &matchoff, &matchlen) <= 0) + &matchoff, &matchlen) <= 0) { + nf_ct_helper_log(skb, ct, "cannot parse cseq"); return NF_DROP; + } cseq = simple_strtoul(*dptr + matchoff, NULL, 10); - if (!cseq) + if (!cseq) { + nf_ct_helper_log(skb, ct, "cannot get cseq"); return NF_DROP; + } matchend = matchoff + matchlen + 1; for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) { @@ -1471,11 +1495,15 @@ static int process_sip_request(struct sk_buff *skb, unsigned int protoff, continue; if (ct_sip_get_header(ct, *dptr, 0, *datalen, SIP_HDR_CSEQ, - &matchoff, &matchlen) <= 0) + &matchoff, &matchlen) <= 0) { + nf_ct_helper_log(skb, ct, "cannot parse cseq"); return NF_DROP; + } cseq = simple_strtoul(*dptr + matchoff, NULL, 10); - if (!cseq) + if (!cseq) { + nf_ct_helper_log(skb, ct, "cannot get cseq"); return NF_DROP; + } return handler->request(skb, protoff, dataoff, dptr, datalen, cseq); @@ -1498,8 +1526,10 @@ static int process_sip_msg(struct sk_buff *skb, struct nf_conn *ct, if (ret == NF_ACCEPT && ct->status & IPS_NAT_MASK) { nf_nat_sip = rcu_dereference(nf_nat_sip_hook); if (nf_nat_sip && !nf_nat_sip(skb, protoff, dataoff, - dptr, datalen)) + dptr, datalen)) { + nf_ct_helper_log(skb, ct, "cannot NAT SIP message"); ret = NF_DROP; + } } return ret; @@ -1563,11 +1593,14 @@ static int sip_help_tcp(struct sk_buff *skb, unsigned int protoff, end += strlen("\r\n\r\n") + clen; msglen = origlen = end - dptr; - if (msglen > datalen) + if (msglen > datalen) { + nf_ct_helper_log(skb, ct, "incomplete/bad SIP message"); return NF_DROP; + } ret = process_sip_msg(skb, ct, protoff, dataoff, &dptr, &msglen); + /* process_sip_* functions report why this packet is dropped */ if (ret != NF_ACCEPT) break; diff = msglen - origlen; diff --git a/net/netfilter/nf_conntrack_tftp.c b/net/netfilter/nf_conntrack_tftp.c index 81fc61c..e9936c8 100644 --- a/net/netfilter/nf_conntrack_tftp.c +++ b/net/netfilter/nf_conntrack_tftp.c @@ -60,8 +60,10 @@ static int tftp_help(struct sk_buff *skb, nf_ct_dump_tuple(&ct->tuplehash[IP_CT_DIR_REPLY].tuple); exp = nf_ct_expect_alloc(ct); - if (exp == NULL) + if (exp == NULL) { + nf_ct_helper_log(skb, ct, "cannot alloc expectation"); return NF_DROP; + } tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT, nf_ct_l3num(ct), @@ -74,8 +76,10 @@ static int tftp_help(struct sk_buff *skb, nf_nat_tftp = rcu_dereference(nf_nat_tftp_hook); if (nf_nat_tftp && ct->status & IPS_NAT_MASK) ret = nf_nat_tftp(skb, ctinfo, exp); - else if (nf_ct_expect_related(exp) != 0) + else if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, ct, "cannot add expectation"); ret = NF_DROP; + } nf_ct_expect_put(exp); break; case TFTP_OPCODE_DATA: diff --git a/net/netfilter/nf_nat_amanda.c b/net/netfilter/nf_nat_amanda.c index 42d3378..3b67c9d 100644 --- a/net/netfilter/nf_nat_amanda.c +++ b/net/netfilter/nf_nat_amanda.c @@ -56,15 +56,19 @@ static unsigned int help(struct sk_buff *skb, } } - if (port == 0) + if (port == 0) { + nf_ct_helper_log(skb, exp->master, "all ports in use"); return NF_DROP; + } sprintf(buffer, "%u", port); ret = nf_nat_mangle_udp_packet(skb, exp->master, ctinfo, protoff, matchoff, matchlen, buffer, strlen(buffer)); - if (ret != NF_ACCEPT) + if (ret != NF_ACCEPT) { + nf_ct_helper_log(skb, exp->master, "cannot mangle packet"); nf_ct_unexpect_related(exp); + } return ret; } diff --git a/net/netfilter/nf_nat_ftp.c b/net/netfilter/nf_nat_ftp.c index e839b97..e84a578 100644 --- a/net/netfilter/nf_nat_ftp.c +++ b/net/netfilter/nf_nat_ftp.c @@ -96,8 +96,10 @@ static unsigned int nf_nat_ftp(struct sk_buff *skb, } } - if (port == 0) + if (port == 0) { + nf_ct_helper_log(skb, ct, "all ports in use"); return NF_DROP; + } buflen = nf_nat_ftp_fmt_cmd(ct, type, buffer, sizeof(buffer), &newaddr, port); @@ -113,6 +115,7 @@ static unsigned int nf_nat_ftp(struct sk_buff *skb, return NF_ACCEPT; out: + nf_ct_helper_log(skb, ct, "cannot mangle packet"); nf_ct_unexpect_related(exp); return NF_DROP; } diff --git a/net/netfilter/nf_nat_irc.c b/net/netfilter/nf_nat_irc.c index 1fedee6..f02b360 100644 --- a/net/netfilter/nf_nat_irc.c +++ b/net/netfilter/nf_nat_irc.c @@ -56,14 +56,18 @@ static unsigned int help(struct sk_buff *skb, } } - if (port == 0) + if (port == 0) { + nf_ct_helper_log(skb, exp->master, "all ports in use"); return NF_DROP; + } ret = nf_nat_mangle_tcp_packet(skb, exp->master, ctinfo, protoff, matchoff, matchlen, buffer, strlen(buffer)); - if (ret != NF_ACCEPT) + if (ret != NF_ACCEPT) { + nf_ct_helper_log(skb, exp->master, "cannot mangle packet"); nf_ct_unexpect_related(exp); + } return ret; } diff --git a/net/netfilter/nf_nat_sip.c b/net/netfilter/nf_nat_sip.c index 5951146e..96ccdf7 100644 --- a/net/netfilter/nf_nat_sip.c +++ b/net/netfilter/nf_nat_sip.c @@ -159,8 +159,10 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, &matchoff, &matchlen, &addr, &port) > 0 && !map_addr(skb, protoff, dataoff, dptr, datalen, - matchoff, matchlen, &addr, port)) + matchoff, matchlen, &addr, port)) { + nf_ct_helper_log(skb, ct, "cannot mangle SIP message"); return NF_DROP; + } request = 1; } else request = 0; @@ -193,8 +195,10 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, olen = *datalen; if (!map_addr(skb, protoff, dataoff, dptr, datalen, - matchoff, matchlen, &addr, port)) + matchoff, matchlen, &addr, port)) { + nf_ct_helper_log(skb, ct, "cannot mangle Via header"); return NF_DROP; + } matchend = matchoff + matchlen + *datalen - olen; @@ -209,8 +213,10 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, &ct->tuplehash[!dir].tuple.dst.u3, true); if (!mangle_packet(skb, protoff, dataoff, dptr, datalen, - poff, plen, buffer, buflen)) + poff, plen, buffer, buflen)) { + nf_ct_helper_log(skb, ct, "cannot mangle maddr"); return NF_DROP; + } } /* The received= parameter (RFC 2361) contains the address @@ -225,6 +231,7 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, false); if (!mangle_packet(skb, protoff, dataoff, dptr, datalen, poff, plen, buffer, buflen)) + nf_ct_helper_log(skb, ct, "cannot mangle received"); return NF_DROP; } @@ -238,8 +245,10 @@ static unsigned int nf_nat_sip(struct sk_buff *skb, unsigned int protoff, __be16 p = ct->tuplehash[!dir].tuple.src.u.udp.port; buflen = sprintf(buffer, "%u", ntohs(p)); if (!mangle_packet(skb, protoff, dataoff, dptr, datalen, - poff, plen, buffer, buflen)) + poff, plen, buffer, buflen)) { + nf_ct_helper_log(skb, ct, "cannot mangle rport"); return NF_DROP; + } } } @@ -253,27 +262,35 @@ next: &addr, &port) > 0) { if (!map_addr(skb, protoff, dataoff, dptr, datalen, matchoff, matchlen, - &addr, port)) + &addr, port)) { + nf_ct_helper_log(skb, ct, "cannot mangle contact"); return NF_DROP; + } } if (!map_sip_addr(skb, protoff, dataoff, dptr, datalen, SIP_HDR_FROM) || - !map_sip_addr(skb, protoff, dataoff, dptr, datalen, SIP_HDR_TO)) + !map_sip_addr(skb, protoff, dataoff, dptr, datalen, SIP_HDR_TO)) { + nf_ct_helper_log(skb, ct, "cannot mangle SIP from/to"); return NF_DROP; + } /* Mangle destination port for Cisco phones, then fix up checksums */ if (dir == IP_CT_DIR_REPLY && ct_sip_info->forced_dport) { struct udphdr *uh; - if (!skb_make_writable(skb, skb->len)) + if (!skb_make_writable(skb, skb->len)) { + nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; + } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, - 0, 0, NULL, 0)) + 0, 0, NULL, 0)) { + nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; + } } return NF_ACCEPT; @@ -372,15 +389,19 @@ static unsigned int nf_nat_sip_expect(struct sk_buff *skb, unsigned int protoff, } } - if (port == 0) + if (port == 0) { + nf_ct_helper_log(skb, ct, "all ports in use for SIP"); return NF_DROP; + } if (!nf_inet_addr_cmp(&exp->tuple.dst.u3, &exp->saved_addr) || exp->tuple.dst.u.udp.port != exp->saved_proto.udp.port) { buflen = sip_sprintf_addr_port(ct, buffer, &newaddr, port); if (!mangle_packet(skb, protoff, dataoff, dptr, datalen, - matchoff, matchlen, buffer, buflen)) + matchoff, matchlen, buffer, buflen)) { + nf_ct_helper_log(skb, ct, "cannot mangle packet"); goto err; + } } return NF_ACCEPT; @@ -573,14 +594,18 @@ static unsigned int nf_nat_sdp_media(struct sk_buff *skb, unsigned int protoff, } } - if (port == 0) + if (port == 0) { + nf_ct_helper_log(skb, ct, "all ports in use for SDP media"); goto err1; + } /* Update media port. */ if (rtp_exp->tuple.dst.u.udp.port != rtp_exp->saved_proto.udp.port && !nf_nat_sdp_port(skb, protoff, dataoff, dptr, datalen, - mediaoff, medialen, port)) + mediaoff, medialen, port)) { + nf_ct_helper_log(skb, ct, "cannot mangle SDP message"); goto err2; + } return NF_ACCEPT; diff --git a/net/netfilter/nf_nat_tftp.c b/net/netfilter/nf_nat_tftp.c index ccabbda..7f67e1d 100644 --- a/net/netfilter/nf_nat_tftp.c +++ b/net/netfilter/nf_nat_tftp.c @@ -28,8 +28,10 @@ static unsigned int help(struct sk_buff *skb, = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.udp.port; exp->dir = IP_CT_DIR_REPLY; exp->expectfn = nf_nat_follow_master; - if (nf_ct_expect_related(exp) != 0) + if (nf_ct_expect_related(exp) != 0) { + nf_ct_helper_log(skb, exp->master, "cannot add expectation"); return NF_DROP; + } return NF_ACCEPT; } -- cgit v0.10.2 From 114ef38aded4457f6e412ef294e09932fe28f026 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Mon, 18 Feb 2013 12:06:13 +0000 Subject: qlcnic: fix unsupported CDRP command error message. Added detailed error messages for FW CDRP command failure Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 4a3bd64..6308d4d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -126,6 +126,7 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, u32 signature; struct pci_dev *pdev = adapter->pdev; struct qlcnic_hardware_context *ahw = adapter->ahw; + const char *fmt; signature = qlcnic_get_cmd_signature(ahw); @@ -147,8 +148,28 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, cmd->rsp.arg[0] = QLCNIC_RCODE_TIMEOUT; } else if (rsp == QLCNIC_CDRP_RSP_FAIL) { cmd->rsp.arg[0] = QLCRD32(adapter, QLCNIC_CDRP_ARG(1)); - dev_err(&pdev->dev, "failed card response code:0x%x\n", - cmd->rsp.arg[0]); + switch (cmd->rsp.arg[0]) { + case QLCNIC_RCODE_INVALID_ARGS: + fmt = "CDRP invalid args: [%d]\n"; + break; + case QLCNIC_RCODE_NOT_SUPPORTED: + case QLCNIC_RCODE_NOT_IMPL: + fmt = "CDRP command not supported: [%d]\n"; + break; + case QLCNIC_RCODE_NOT_PERMITTED: + fmt = "CDRP requested action not permitted: [%d]\n"; + break; + case QLCNIC_RCODE_INVALID: + fmt = "CDRP invalid or unknown cmd received: [%d]\n"; + break; + case QLCNIC_RCODE_TIMEOUT: + fmt = "CDRP command timeout: [%d]\n"; + break; + default: + fmt = "CDRP command failed: [%d]\n"; + break; + } + dev_err(&pdev->dev, fmt, cmd->rsp.arg[0]); } else if (rsp == QLCNIC_CDRP_RSP_OK) cmd->rsp.arg[0] = QLCNIC_RCODE_SUCCESS; -- cgit v0.10.2 From 7dd90cf171cae71f5f92d8c91299f0a8a0b21661 Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Mon, 18 Feb 2013 12:06:14 +0000 Subject: qlcnic: fix mailbox interrupt. o Config interrupt is not needed for mailbox interrupts. Signed-off-by: Sucheta Chakraborty Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index f7b39d1..e92cc52 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -497,8 +497,6 @@ int qlcnic_83xx_setup_mbx_intr(struct qlcnic_adapter *adapter) /* Enable mailbox interrupt */ qlcnic_83xx_enable_mbx_intrpt(adapter); - if (adapter->flags & QLCNIC_MSIX_ENABLED) - err = qlcnic_83xx_config_intrpt(adapter, 1); return err; } @@ -1915,7 +1913,7 @@ int qlcnic_83xx_config_intrpt(struct qlcnic_adapter *adapter, bool op_type) u32 val, temp; struct qlcnic_cmd_args cmd; - max_ints = adapter->ahw->num_msix; + max_ints = adapter->ahw->num_msix - 1; qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIG_INTRPT); cmd.req.arg[1] = max_ints; for (i = 0, index = 2; i < max_ints; i++) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 6308d4d..a69097c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -599,9 +599,17 @@ int qlcnic_fw_create_ctx(struct qlcnic_adapter *dev) dev->flags &= ~QLCNIC_NEED_FLR; } + if (qlcnic_83xx_check(dev) && (dev->flags & QLCNIC_MSIX_ENABLED)) { + if (dev->ahw->diag_test != QLCNIC_LOOPBACK_TEST) { + err = qlcnic_83xx_config_intrpt(dev, 1); + if (err) + return err; + } + } + err = qlcnic_fw_cmd_create_rx_ctx(dev); if (err) - return err; + goto err_out; for (ring = 0; ring < dev->max_drv_tx_rings; ring++) { err = qlcnic_fw_cmd_create_tx_ctx(dev, @@ -610,18 +618,25 @@ int qlcnic_fw_create_ctx(struct qlcnic_adapter *dev) if (err) { qlcnic_fw_cmd_destroy_rx_ctx(dev); if (ring == 0) - return err; + goto err_out; for (i = 0; i < ring; i++) qlcnic_fw_cmd_destroy_tx_ctx(dev, &dev->tx_ring[i]); - return err; + goto err_out; } } set_bit(__QLCNIC_FW_ATTACHED, &dev->state); return 0; + +err_out: + if (qlcnic_83xx_check(dev) && (dev->flags & QLCNIC_MSIX_ENABLED)) { + if (dev->ahw->diag_test != QLCNIC_LOOPBACK_TEST) + qlcnic_83xx_config_intrpt(dev, 0); + } + return err; } void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) @@ -633,6 +648,12 @@ void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) for (ring = 0; ring < adapter->max_drv_tx_rings; ring++) qlcnic_fw_cmd_destroy_tx_ctx(adapter, &adapter->tx_ring[ring]); + + if (qlcnic_83xx_check(adapter) && + (adapter->flags & QLCNIC_MSIX_ENABLED)) { + if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) + qlcnic_83xx_config_intrpt(adapter, 0); + } /* Allow dma queues to drain after context reset */ mdelay(20); } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index b953168..f084dc1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1965,11 +1965,8 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; err_out_disable_mbx_intr: - if (qlcnic_83xx_check(adapter)) { - if (adapter->flags & QLCNIC_MSIX_ENABLED) - qlcnic_83xx_config_intrpt(adapter, 0); + if (qlcnic_83xx_check(adapter)) qlcnic_83xx_free_mbx_intr(adapter); - } err_out_disable_msi: qlcnic_teardown_intr(adapter); @@ -2015,8 +2012,6 @@ static void qlcnic_remove(struct pci_dev *pdev) unregister_netdev(netdev); if (qlcnic_83xx_check(adapter)) { - if (adapter->flags & QLCNIC_MSIX_ENABLED) - qlcnic_83xx_config_intrpt(adapter, 0); qlcnic_83xx_free_mbx_intr(adapter); qlcnic_83xx_register_nic_idc_func(adapter, 0); cancel_delayed_work_sync(&adapter->idc_aen_work); @@ -3107,8 +3102,6 @@ static pci_ers_result_t qlcnic_io_error_detected(struct pci_dev *pdev, qlcnic_down(adapter, netdev); if (qlcnic_83xx_check(adapter)) { - if (adapter->flags & QLCNIC_MSIX_ENABLED) - qlcnic_83xx_config_intrpt(adapter, 0); qlcnic_83xx_free_mbx_intr(adapter); qlcnic_83xx_register_nic_idc_func(adapter, 0); cancel_delayed_work_sync(&adapter->idc_aen_work); @@ -3203,13 +3196,11 @@ int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data, size_t len) if (netif_running(netdev)) __qlcnic_down(adapter, netdev); - if (qlcnic_83xx_check(adapter)) { - if (adapter->flags & QLCNIC_MSIX_ENABLED) - qlcnic_83xx_config_intrpt(adapter, 0); + qlcnic_detach(adapter); + + if (qlcnic_83xx_check(adapter)) qlcnic_83xx_free_mbx_intr(adapter); - } - qlcnic_detach(adapter); qlcnic_teardown_intr(adapter); err = qlcnic_setup_intr(adapter, data); if (err) { -- cgit v0.10.2 From ac166700991c8f2760e4d3656b4783986cfbf545 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 18 Feb 2013 12:06:15 +0000 Subject: qlcnic: refactor Legacy interrupt handling for 83xx o Cleanly seperate 83xx Legacy interrupt handling code from 82xx o Update 83xx Legacy interrupt handling code to match with the spec Signed-off-by: Himanshu Madhani Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index e92cc52..cd5ae88 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -388,12 +388,45 @@ int qlcnic_83xx_setup_intr(struct qlcnic_adapter *adapter, u8 num_intr) return 0; } -inline void qlcnic_83xx_enable_intr(struct qlcnic_adapter *adapter, - struct qlcnic_host_sds_ring *sds_ring) +inline void qlcnic_83xx_clear_legacy_intr_mask(struct qlcnic_adapter *adapter) +{ + writel(0, adapter->tgt_mask_reg); +} + +/* Enable MSI-x and INT-x interrupts */ +void qlcnic_83xx_enable_intr(struct qlcnic_adapter *adapter, + struct qlcnic_host_sds_ring *sds_ring) { writel(0, sds_ring->crb_intr_mask); - if (!QLCNIC_IS_MSI_FAMILY(adapter)) - writel(0, adapter->tgt_mask_reg); +} + +/* Disable MSI-x and INT-x interrupts */ +void qlcnic_83xx_disable_intr(struct qlcnic_adapter *adapter, + struct qlcnic_host_sds_ring *sds_ring) +{ + writel(1, sds_ring->crb_intr_mask); +} + +inline void qlcnic_83xx_enable_legacy_msix_mbx_intr(struct qlcnic_adapter + *adapter) +{ + u32 mask; + + /* Mailbox in MSI-x mode and Legacy Interrupt share the same + * source register. We could be here before contexts are created + * and sds_ring->crb_intr_mask has not been initialized, calculate + * BAR offset for Interrupt Source Register + */ + mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); + writel(0, adapter->ahw->pci_base0 + mask); +} + +inline void qlcnic_83xx_disable_mbx_intr(struct qlcnic_adapter *adapter) +{ + u32 mask; + + mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); + writel(1, adapter->ahw->pci_base0 + mask); } static inline void qlcnic_83xx_get_mbx_data(struct qlcnic_adapter *adapter, @@ -419,8 +452,12 @@ irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *adapter) adapter->stats.spurious_intr++; return IRQ_NONE; } + /* The barrier is required to ensure writes to the registers */ + wmb(); + /* clear the interrupt trigger control register */ writel(0, adapter->isr_int_vec); + intr_val = readl(adapter->isr_int_vec); do { intr_val = readl(adapter->tgt_status_reg); if (QLC_83XX_INTX_FUNC(intr_val) != ahw->pci_func) @@ -429,13 +466,51 @@ irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *adapter) } while (QLC_83XX_VALID_INTX_BIT30(intr_val) && (retries < QLC_83XX_LEGACY_INTX_MAX_RETRY)); - if (retries == QLC_83XX_LEGACY_INTX_MAX_RETRY) { - dev_info(&adapter->pdev->dev, - "Reached maximum retries to clear legacy interrupt\n"); + return IRQ_HANDLED; +} + +static void qlcnic_83xx_poll_process_aen(struct qlcnic_adapter *adapter) +{ + u32 resp, event; + unsigned long flags; + + spin_lock_irqsave(&adapter->ahw->mbx_lock, flags); + + resp = QLCRDX(adapter->ahw, QLCNIC_FW_MBX_CTRL); + if (!(resp & QLCNIC_SET_OWNER)) + goto out; + + event = readl(QLCNIC_MBX_FW(adapter->ahw, 0)); + if (event & QLCNIC_MBX_ASYNC_EVENT) + qlcnic_83xx_process_aen(adapter); +out: + qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter); + spin_unlock_irqrestore(&adapter->ahw->mbx_lock, flags); +} + +irqreturn_t qlcnic_83xx_intr(int irq, void *data) +{ + struct qlcnic_adapter *adapter = data; + struct qlcnic_host_sds_ring *sds_ring; + struct qlcnic_hardware_context *ahw = adapter->ahw; + + if (qlcnic_83xx_clear_legacy_intr(adapter) == IRQ_NONE) return IRQ_NONE; + + qlcnic_83xx_poll_process_aen(adapter); + + if (ahw->diag_test == QLCNIC_INTERRUPT_TEST) { + ahw->diag_cnt++; + qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter); + return IRQ_HANDLED; } - mdelay(QLC_83XX_LEGACY_INTX_DELAY); + if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) { + qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter); + } else { + sds_ring = &adapter->recv_ctx->sds_rings[0]; + napi_schedule(&sds_ring->napi); + } return IRQ_HANDLED; } @@ -460,14 +535,20 @@ done: void qlcnic_83xx_free_mbx_intr(struct qlcnic_adapter *adapter) { - u32 val = 0; - u32 num_msix = adapter->ahw->num_msix - 1; + u32 val = 0, num_msix = adapter->ahw->num_msix - 1; - val = (num_msix << 8); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + num_msix = adapter->ahw->num_msix - 1; + else + num_msix = 0; QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, val); - if (adapter->flags & QLCNIC_MSIX_ENABLED) - free_irq(adapter->msix_entries[num_msix].vector, adapter); + + qlcnic_83xx_disable_mbx_intr(adapter); + + msleep(20); + synchronize_irq(adapter->msix_entries[num_msix].vector); + free_irq(adapter->msix_entries[num_msix].vector, adapter); } int qlcnic_83xx_setup_mbx_intr(struct qlcnic_adapter *adapter) @@ -486,13 +567,23 @@ int qlcnic_83xx_setup_mbx_intr(struct qlcnic_adapter *adapter) handler = qlcnic_83xx_handle_aen; val = adapter->msix_entries[adapter->ahw->num_msix - 1].vector; snprintf(name, (IFNAMSIZ + 4), - "%s[%s]", adapter->netdev->name, "aen"); + "%s[%s]", "qlcnic", "aen"); err = request_irq(val, handler, flags, name, adapter); if (err) { dev_err(&adapter->pdev->dev, "failed to register MBX interrupt\n"); return err; } + } else { + handler = qlcnic_83xx_intr; + val = adapter->msix_entries[0].vector; + err = request_irq(val, handler, flags, "qlcnic", adapter); + if (err) { + dev_err(&adapter->pdev->dev, + "failed to register INTx interrupt\n"); + return err; + } + qlcnic_83xx_clear_legacy_intr_mask(adapter); } /* Enable mailbox interrupt */ @@ -604,6 +695,7 @@ void qlcnic_83xx_enable_mbx_intrpt(struct qlcnic_adapter *adapter) val = BIT_2; QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, val); + qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter); } void qlcnic_83xx_check_vf(struct qlcnic_adapter *adapter, @@ -700,6 +792,7 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, int i; u16 opcode; u8 mbx_err_code; + unsigned long flags; u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd; struct qlcnic_hardware_context *ahw = adapter->ahw; @@ -711,7 +804,7 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, return 0; } - spin_lock(&ahw->mbx_lock); + spin_lock_irqsave(&adapter->ahw->mbx_lock, flags); mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); if (mbx_val) { @@ -721,7 +814,7 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, "Mailbox not available, 0x%x, collect FW dump\n", mbx_val); cmd->rsp.arg[0] = QLCNIC_RCODE_TIMEOUT; - spin_unlock(&ahw->mbx_lock); + spin_unlock_irqrestore(&adapter->ahw->mbx_lock, flags); return cmd->rsp.arg[0]; } @@ -776,7 +869,7 @@ poll: out: /* clear fw mbx control register */ QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER); - spin_unlock(&ahw->mbx_lock); + spin_unlock_irqrestore(&adapter->ahw->mbx_lock, flags); return rsp; } @@ -1194,7 +1287,7 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev, if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - writel(1, sds_ring->crb_intr_mask); + qlcnic_83xx_disable_intr(adapter, sds_ring); } } @@ -1730,6 +1823,7 @@ irqreturn_t qlcnic_83xx_handle_aen(int irq, void *data) resp = QLCRDX(adapter->ahw, QLCNIC_FW_MBX_CTRL); if (!(resp & QLCNIC_SET_OWNER)) goto out; + event = readl(QLCNIC_MBX_FW(adapter->ahw, 0)); if (event & QLCNIC_MBX_ASYNC_EVENT) qlcnic_83xx_process_aen(adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index f60e28a..127fa27 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -368,9 +368,12 @@ irqreturn_t qlcnic_83xx_handle_aen(int, void *); int qlcnic_83xx_get_port_info(struct qlcnic_adapter *); void qlcnic_83xx_enable_mbx_intrpt(struct qlcnic_adapter *); irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *); +irqreturn_t qlcnic_83xx_intr(int, void *); irqreturn_t qlcnic_83xx_tmp_intr(int, void *); void qlcnic_83xx_enable_intr(struct qlcnic_adapter *, struct qlcnic_host_sds_ring *); +void qlcnic_83xx_disable_intr(struct qlcnic_adapter *, + struct qlcnic_host_sds_ring *); void qlcnic_83xx_check_vf(struct qlcnic_adapter *, const struct pci_device_id *); void qlcnic_83xx_process_aen(struct qlcnic_adapter *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 93839f8..662292d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1558,24 +1558,6 @@ skip: return count; } -static void qlcnic_83xx_poll_process_aen(struct qlcnic_adapter *adapter) -{ - unsigned long flags; - u32 mask, resp, event; - - spin_lock_irqsave(&adapter->ahw->mbx_lock, flags); - resp = QLCRDX(adapter->ahw, QLCNIC_FW_MBX_CTRL); - if (!(resp & QLCNIC_SET_OWNER)) - goto out; - event = readl(QLCNIC_MBX_FW(adapter->ahw, 0)); - if (event & QLCNIC_MBX_ASYNC_EVENT) - qlcnic_83xx_process_aen(adapter); -out: - mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK); - writel(0, adapter->ahw->pci_base0 + mask); - spin_unlock_irqrestore(&adapter->ahw->mbx_lock, flags); -} - static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) { int tx_complete; @@ -1589,15 +1571,11 @@ static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) /* tx ring count = 1 */ tx_ring = adapter->tx_ring; - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) - qlcnic_83xx_poll_process_aen(adapter); - tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); if ((work_done < budget) && tx_complete) { napi_complete(&sds_ring->napi); - if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) - qlcnic_83xx_enable_intr(adapter, sds_ring); + qlcnic_83xx_enable_intr(adapter, sds_ring); } return work_done; @@ -1653,7 +1631,8 @@ void qlcnic_83xx_napi_enable(struct qlcnic_adapter *adapter) for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &recv_ctx->sds_rings[ring]; napi_enable(&sds_ring->napi); - qlcnic_83xx_enable_intr(adapter, sds_ring); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_enable_intr(adapter, sds_ring); } if (adapter->flags & QLCNIC_MSIX_ENABLED) { @@ -1677,7 +1656,8 @@ void qlcnic_83xx_napi_disable(struct qlcnic_adapter *adapter) for (ring = 0; ring < adapter->max_sds_rings; ring++) { sds_ring = &recv_ctx->sds_rings[ring]; - writel(1, sds_ring->crb_intr_mask); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_disable_intr(adapter, sds_ring); napi_synchronize(&sds_ring->napi); napi_disable(&sds_ring->napi); } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f084dc1..3a0f182 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1269,20 +1269,27 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter) handler = qlcnic_msi_intr; else { flags |= IRQF_SHARED; - handler = qlcnic_intr; + if (qlcnic_82xx_check(adapter)) + handler = qlcnic_intr; + else + handler = qlcnic_83xx_intr; } } adapter->irq = netdev->irq; if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) { - for (ring = 0; ring < adapter->max_sds_rings; ring++) { - sds_ring = &recv_ctx->sds_rings[ring]; - snprintf(sds_ring->name, sizeof(int) + IFNAMSIZ, - "%s[%d]", netdev->name, ring); - err = request_irq(sds_ring->irq, handler, flags, - sds_ring->name, sds_ring); - if (err) - return err; + if (qlcnic_82xx_check(adapter) || + (qlcnic_83xx_check(adapter) && + (adapter->flags & QLCNIC_MSIX_ENABLED))) { + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + snprintf(sds_ring->name, sizeof(int) + IFNAMSIZ, + "%s[%d]", netdev->name, ring); + err = request_irq(sds_ring->irq, handler, flags, + sds_ring->name, sds_ring); + if (err) + return err; + } } if (qlcnic_83xx_check(adapter) && (adapter->flags & QLCNIC_MSIX_ENABLED)) { @@ -1292,7 +1299,7 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter) tx_ring = &adapter->tx_ring[ring]; snprintf(tx_ring->name, sizeof(int) + IFNAMSIZ, "%s[%d]", netdev->name, - adapter->max_sds_rings + ring); + adapter->max_sds_rings + ring); err = request_irq(tx_ring->irq, handler, flags, tx_ring->name, tx_ring); if (err) @@ -1313,9 +1320,13 @@ qlcnic_free_irq(struct qlcnic_adapter *adapter) struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx; if (adapter->ahw->diag_test != QLCNIC_LOOPBACK_TEST) { - for (ring = 0; ring < adapter->max_sds_rings; ring++) { - sds_ring = &recv_ctx->sds_rings[ring]; - free_irq(sds_ring->irq, sds_ring); + if (qlcnic_82xx_check(adapter) || + (qlcnic_83xx_check(adapter) && + (adapter->flags & QLCNIC_MSIX_ENABLED))) { + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + free_irq(sds_ring->irq, sds_ring); + } } if (qlcnic_83xx_check(adapter)) { for (ring = 0; ring < adapter->max_drv_tx_rings; -- cgit v0.10.2 From 99e8587900a3d32b1eaa3a92da90b49e9d4ff765 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Mon, 18 Feb 2013 12:06:16 +0000 Subject: qlcnic: fix estimation of receive MSS in case of LRO for 83xx adapter Set gso_size to MSS obtained from adapter to avoid incorrect estimation of receive MSS, which would lead to delayed ACKs in some traffic patterns Example: Send two or three packets and wait for ack and only then send remaining packets. Signed-off-by: Shahed Shaikh Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 127fa27..61f81f6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -223,6 +223,7 @@ struct qlc_83xx_idc { #define QLC_83XX_GET_LSO_CAPABILITY(val) (val & 0x40) #define QLC_83XX_GET_HW_LRO_CAPABILITY(val) (val & 0x400) #define QLC_83XX_GET_VLAN_ALIGN_CAPABILITY(val) (val & 0x4000) +#define QLC_83XX_GET_FW_LRO_MSS_CAPABILITY(val) (val & 0x20000) #define QLC_83XX_VIRTUAL_NIC_MODE 0xFF #define QLC_83XX_DEFAULT_MODE 0x0 #define QLCNIC_BRDTYPE_83XX_10G 0x0083 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 662292d..2990f45 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -88,6 +88,8 @@ #define qlcnic_get_lro_sts_mss(sts_data1) \ ((sts_data1 >> 32) & 0x0FFFF) +#define qlcnic_83xx_get_lro_sts_mss(sts) ((sts) & 0xffff) + /* opcode field in status_desc */ #define QLCNIC_SYN_OFFLOAD 0x03 #define QLCNIC_RXPKT_DESC 0x04 @@ -1423,7 +1425,7 @@ qlcnic_83xx_process_lro(struct qlcnic_adapter *adapter, bool push; int l2_hdr_offset, l4_hdr_offset; int index; - u16 lro_length, length, data_offset; + u16 lro_length, length, data_offset, gso_size; u16 vid = 0xffff; if (unlikely(ring > adapter->max_rds_rings)) @@ -1478,6 +1480,15 @@ qlcnic_83xx_process_lro(struct qlcnic_adapter *adapter, th->psh = push; length = skb->len; + if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) { + gso_size = qlcnic_83xx_get_lro_sts_mss(sts_data[0]); + skb_shinfo(skb)->gso_size = gso_size; + if (skb->protocol == htons(ETH_P_IPV6)) + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + else + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + } + if (vid != 0xffff) __vlan_hwaccel_put_tag(skb, vid); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 3a0f182..e03017a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1339,11 +1339,24 @@ qlcnic_free_irq(struct qlcnic_adapter *adapter) } } +static void qlcnic_get_lro_mss_capability(struct qlcnic_adapter *adapter) +{ + u32 capab = 0; + + if (qlcnic_82xx_check(adapter)) { + if (adapter->ahw->capabilities2 & + QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG) + adapter->flags |= QLCNIC_FW_LRO_MSS_CAP; + } else { + capab = adapter->ahw->capabilities; + if (QLC_83XX_GET_FW_LRO_MSS_CAPABILITY(capab)) + adapter->flags |= QLCNIC_FW_LRO_MSS_CAP; + } +} + int __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) { int ring; - u32 capab2; - struct qlcnic_host_rds_ring *rds_ring; if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC) @@ -1353,12 +1366,7 @@ int __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) return 0; if (qlcnic_set_eswitch_port_config(adapter)) return -EIO; - - if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) { - capab2 = QLCRD32(adapter, CRB_FW_CAPABILITIES_2); - if (capab2 & QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG) - adapter->flags |= QLCNIC_FW_LRO_MSS_CAP; - } + qlcnic_get_lro_mss_capability(adapter); if (qlcnic_fw_create_ctx(adapter)) return -EIO; -- cgit v0.10.2 From 53643a75b147bfb30f3488a4eaf5a59bfeeb39bb Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Mon, 18 Feb 2013 13:22:37 +0000 Subject: qlcnic: fix ping resumption to a VM after a live migration Delete the MAC address of a VM, from the adapter's embedded switch, after the VM had been migrated out of this adapter/server. Signed-off-by: Shahed Shaikh Signed-off-by: Rajesh Borundia Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 61b594c..01e9ea1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1008,9 +1008,12 @@ struct qlcnic_adapter { struct delayed_work idc_aen_work; struct qlcnic_filter_hash fhash; + struct qlcnic_filter_hash rx_fhash; spinlock_t tx_clean_lock; spinlock_t mac_learn_lock; + /* spinlock for catching rcv filters for eswitch traffic */ + spinlock_t rx_mac_learn_lock; u32 file_prd_off; /*File fw product offset*/ u32 fw_version; const struct firmware *fw; @@ -1506,6 +1509,8 @@ int qlcnic_init_pci_info(struct qlcnic_adapter *); int qlcnic_set_default_offload_settings(struct qlcnic_adapter *); int qlcnic_reset_npar_config(struct qlcnic_adapter *); int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *); +void qlcnic_add_lb_filter(struct qlcnic_adapter *, struct sk_buff *, int, + __le16); /* * QLOGIC Board information */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 51716ab..325e11e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -578,7 +578,8 @@ void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter) struct qlcnic_filter *tmp_fil; struct hlist_node *tmp_hnode, *n; struct hlist_head *head; - int i, time; + int i; + unsigned long time; u8 cmd; for (i = 0; i < adapter->fhash.fbucket_size; i++) { @@ -600,6 +601,21 @@ void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter) } } } + for (i = 0; i < adapter->rx_fhash.fbucket_size; i++) { + head = &(adapter->rx_fhash.fhead[i]); + + hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) + { + time = tmp_fil->ftime; + if (jiffies > (QLCNIC_FILTER_AGE * HZ + time)) { + spin_lock_bh(&adapter->rx_mac_learn_lock); + adapter->rx_fhash.fnum--; + hlist_del(&tmp_fil->fnode); + spin_unlock_bh(&adapter->rx_mac_learn_lock); + kfree(tmp_fil); + } + } + } } void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 2990f45..6387e0c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -152,6 +152,89 @@ static inline u32 qlcnic_get_ref_handle(struct qlcnic_adapter *adapter, return handle; } +static inline int qlcnic_82xx_is_lb_pkt(u64 sts_data) +{ + return (qlcnic_get_sts_status(sts_data) == STATUS_CKSUM_LOOP) ? 1 : 0; +} + +void qlcnic_add_lb_filter(struct qlcnic_adapter *adapter, struct sk_buff *skb, + int loopback_pkt, __le16 vlan_id) +{ + struct ethhdr *phdr = (struct ethhdr *)(skb->data); + struct qlcnic_filter *fil, *tmp_fil; + struct hlist_node *tmp_hnode, *n; + struct hlist_head *head; + unsigned long time; + u64 src_addr = 0; + u8 hindex, found = 0, op; + int ret; + + memcpy(&src_addr, phdr->h_source, ETH_ALEN); + + if (loopback_pkt) { + if (adapter->rx_fhash.fnum >= adapter->rx_fhash.fmax) + return; + + hindex = qlcnic_mac_hash(src_addr) & + (adapter->fhash.fbucket_size - 1); + head = &(adapter->rx_fhash.fhead[hindex]); + + hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) { + if (!memcmp(tmp_fil->faddr, &src_addr, ETH_ALEN) && + tmp_fil->vlan_id == vlan_id) { + time = tmp_fil->ftime; + if (jiffies > (QLCNIC_READD_AGE * HZ + time)) + tmp_fil->ftime = jiffies; + return; + } + } + + fil = kzalloc(sizeof(struct qlcnic_filter), GFP_ATOMIC); + if (!fil) + return; + + fil->ftime = jiffies; + memcpy(fil->faddr, &src_addr, ETH_ALEN); + fil->vlan_id = vlan_id; + spin_lock(&adapter->rx_mac_learn_lock); + hlist_add_head(&(fil->fnode), head); + adapter->rx_fhash.fnum++; + spin_unlock(&adapter->rx_mac_learn_lock); + } else { + hindex = qlcnic_mac_hash(src_addr) & + (adapter->fhash.fbucket_size - 1); + head = &(adapter->rx_fhash.fhead[hindex]); + spin_lock(&adapter->rx_mac_learn_lock); + hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) { + if (!memcmp(tmp_fil->faddr, &src_addr, ETH_ALEN) && + tmp_fil->vlan_id == vlan_id) { + found = 1; + break; + } + } + + if (!found) { + spin_unlock(&adapter->rx_mac_learn_lock); + return; + } + + op = vlan_id ? QLCNIC_MAC_VLAN_ADD : QLCNIC_MAC_ADD; + ret = qlcnic_sre_macaddr_change(adapter, (u8 *)&src_addr, + vlan_id, op); + if (!ret) { + op = vlan_id ? QLCNIC_MAC_VLAN_DEL : QLCNIC_MAC_DEL; + ret = qlcnic_sre_macaddr_change(adapter, + (u8 *)&src_addr, + vlan_id, op); + if (!ret) { + hlist_del(&(tmp_fil->fnode)); + adapter->rx_fhash.fnum--; + } + } + spin_unlock(&adapter->rx_mac_learn_lock); + } +} + void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, __le16 vlan_id) { @@ -207,9 +290,6 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, return; } - /* Only NPAR capable devices support vlan based learning */ - if (adapter->flags & QLCNIC_ESWITCH_ENABLED) - vlan_id = first_desc->vlan_TCI; memcpy(&src_addr, phdr->h_source, ETH_ALEN); hindex = qlcnic_mac_hash(src_addr) & (adapter->fhash.fbucket_size - 1); head = &(adapter->fhash.fhead[hindex]); @@ -920,8 +1000,8 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter, struct qlcnic_rx_buffer *buffer; struct sk_buff *skb; struct qlcnic_host_rds_ring *rds_ring; - int index, length, cksum, pkt_offset; - u16 vid = 0xffff; + int index, length, cksum, pkt_offset, is_lb_pkt; + u16 vid = 0xffff, t_vid; if (unlikely(ring >= adapter->max_rds_rings)) return NULL; @@ -941,6 +1021,14 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter, if (!skb) return buffer; + if (adapter->drv_mac_learn && + (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + t_vid = 0; + is_lb_pkt = qlcnic_82xx_is_lb_pkt(sts_data0); + qlcnic_add_lb_filter(adapter, skb, is_lb_pkt, + cpu_to_le16(t_vid)); + } + if (length > rds_ring->skb_size) skb_put(skb, rds_ring->skb_size); else @@ -985,8 +1073,8 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, struct ipv6hdr *ipv6h; struct tcphdr *th; bool push, timestamp; - int index, l2_hdr_offset, l4_hdr_offset; - u16 lro_length, length, data_offset, vid = 0xffff; + int index, l2_hdr_offset, l4_hdr_offset, is_lb_pkt; + u16 lro_length, length, data_offset, t_vid, vid = 0xffff; u32 seq_number; if (unlikely(ring > adapter->max_rds_rings)) @@ -1011,6 +1099,14 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, if (!skb) return buffer; + if (adapter->drv_mac_learn && + (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + t_vid = 0; + is_lb_pkt = qlcnic_82xx_is_lb_pkt(sts_data0); + qlcnic_add_lb_filter(adapter, skb, is_lb_pkt, + cpu_to_le16(t_vid)); + } + if (timestamp) data_offset = l4_hdr_offset + QLC_TCP_TS_HDR_SIZE; else @@ -1357,6 +1453,17 @@ void qlcnic_82xx_napi_disable(struct qlcnic_adapter *adapter) } } +#define QLC_83XX_NORMAL_LB_PKT (1ULL << 36) +#define QLC_83XX_LRO_LB_PKT (1ULL << 46) + +static inline int qlcnic_83xx_is_lb_pkt(u64 sts_data, int lro_pkt) +{ + if (lro_pkt) + return (sts_data & QLC_83XX_LRO_LB_PKT) ? 1 : 0; + else + return (sts_data & QLC_83XX_NORMAL_LB_PKT) ? 1 : 0; +} + static struct qlcnic_rx_buffer * qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter, struct qlcnic_host_sds_ring *sds_ring, @@ -1367,8 +1474,8 @@ qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter, struct qlcnic_rx_buffer *buffer; struct sk_buff *skb; struct qlcnic_host_rds_ring *rds_ring; - int index, length, cksum; - u16 vid = 0xffff; + int index, length, cksum, is_lb_pkt; + u16 vid = 0xffff, t_vid; if (unlikely(ring >= adapter->max_rds_rings)) return NULL; @@ -1386,6 +1493,14 @@ qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter, if (!skb) return buffer; + if (adapter->drv_mac_learn && + (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + t_vid = 0; + is_lb_pkt = qlcnic_83xx_is_lb_pkt(sts_data[1], 0); + qlcnic_add_lb_filter(adapter, skb, is_lb_pkt, + cpu_to_le16(t_vid)); + } + if (length > rds_ring->skb_size) skb_put(skb, rds_ring->skb_size); else @@ -1424,9 +1539,9 @@ qlcnic_83xx_process_lro(struct qlcnic_adapter *adapter, struct tcphdr *th; bool push; int l2_hdr_offset, l4_hdr_offset; - int index; + int index, is_lb_pkt; u16 lro_length, length, data_offset, gso_size; - u16 vid = 0xffff; + u16 vid = 0xffff, t_vid; if (unlikely(ring > adapter->max_rds_rings)) return NULL; @@ -1447,6 +1562,14 @@ qlcnic_83xx_process_lro(struct qlcnic_adapter *adapter, skb = qlcnic_process_rxbuf(adapter, rds_ring, index, STATUS_CKSUM_OK); if (!skb) return buffer; + + if (adapter->drv_mac_learn && + (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + t_vid = 0; + is_lb_pkt = qlcnic_83xx_is_lb_pkt(sts_data[1], 1); + qlcnic_add_lb_filter(adapter, skb, is_lb_pkt, + cpu_to_le16(t_vid)); + } if (qlcnic_83xx_is_tstamp(sts_data[1])) data_offset = l4_hdr_offset + QLCNIC_TCP_TS_HDR_SIZE; else diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index e03017a..5d5fd06 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2208,6 +2208,7 @@ void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter) act_pci_func = adapter->ahw->act_pci_func; spin_lock_init(&adapter->mac_learn_lock); + spin_lock_init(&adapter->rx_mac_learn_lock); if (qlcnic_82xx_check(adapter)) { filter_size = QLCNIC_LB_MAX_FILTERS; @@ -2231,6 +2232,20 @@ void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter) for (i = 0; i < adapter->fhash.fbucket_size; i++) INIT_HLIST_HEAD(&adapter->fhash.fhead[i]); + + adapter->rx_fhash.fbucket_size = adapter->fhash.fbucket_size; + + head = kcalloc(adapter->rx_fhash.fbucket_size, + sizeof(struct hlist_head), GFP_ATOMIC); + + if (!head) + return; + + adapter->rx_fhash.fmax = (filter_size / act_pci_func); + adapter->rx_fhash.fhead = head; + + for (i = 0; i < adapter->rx_fhash.fbucket_size; i++) + INIT_HLIST_HEAD(&adapter->rx_fhash.fhead[i]); } static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter) @@ -2240,6 +2255,12 @@ static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter) adapter->fhash.fhead = NULL; adapter->fhash.fmax = 0; + + if (adapter->rx_fhash.fmax && adapter->rx_fhash.fhead) + kfree(adapter->rx_fhash.fhead); + + adapter->rx_fhash.fmax = 0; + adapter->rx_fhash.fhead = NULL; } int qlcnic_check_temp(struct qlcnic_adapter *adapter) -- cgit v0.10.2 From b0daa81b6a797bc5f2c97b061467a4fb0a4b2e43 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Mon, 18 Feb 2013 12:06:18 +0000 Subject: qlcnic: Bump up the version to 5.1.34 Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 01e9ea1..11c3db6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -38,8 +38,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 1 -#define _QLCNIC_LINUX_SUBVERSION 33 -#define QLCNIC_LINUX_VERSIONID "5.1.33" +#define _QLCNIC_LINUX_SUBVERSION 34 +#define QLCNIC_LINUX_VERSIONID "5.1.34" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v0.10.2 From ccae0e50c16a7f7adb029c169147400d1ce9f703 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 17 Feb 2013 17:01:20 +0000 Subject: b43: Increase number of RX DMA slots Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by: Larry Finger Cc: Bastian Bittorf Cc: Stable Signed-off-by: David S. Miller diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h index 315b96e..9fdd198 100644 --- a/drivers/net/wireless/b43/dma.h +++ b/drivers/net/wireless/b43/dma.h @@ -169,7 +169,7 @@ struct b43_dmadesc_generic { /* DMA engine tuning knobs */ #define B43_TXRING_SLOTS 256 -#define B43_RXRING_SLOTS 64 +#define B43_RXRING_SLOTS 256 #define B43_DMA0_RX_FW598_BUFSIZE (B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN) #define B43_DMA0_RX_FW351_BUFSIZE (B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN) -- cgit v0.10.2 From b59340c2c0508d280f10658ad662fa56a39c74c2 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Mon, 18 Feb 2013 07:59:02 +0000 Subject: bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate() port->slave can be NULL since it's being initialized in bond_enslave thus dereferencing a NULL pointer in bond_3ad_update_lacp_rate() Also fix a minor bug, which could cause a port not to have AD_STATE_LACP_TIMEOUT since there's no sync between bond_3ad_update_lacp_rate() and bond_3ad_bind_slave(), by changing the read_lock to a write_lock_bh in bond_3ad_update_lacp_rate(). Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 84fabd6..0e45b40 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2494,11 +2494,13 @@ void bond_3ad_update_lacp_rate(struct bonding *bond) struct port *port = NULL; int lacp_fast; - read_lock(&bond->lock); + write_lock_bh(&bond->lock); lacp_fast = bond->params.lacp_fast; bond_for_each_slave(bond, slave, i) { port = &(SLAVE_AD_INFO(slave).port); + if (port->slave == NULL) + continue; __get_state_machine_lock(port); if (lacp_fast) port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT; @@ -2507,5 +2509,5 @@ void bond_3ad_update_lacp_rate(struct bonding *bond) __release_state_machine_lock(port); } - read_unlock(&bond->lock); + write_unlock_bh(&bond->lock); } -- cgit v0.10.2 From e0809dbc47dea83eba7a9abb70e87470904d4372 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Mon, 18 Feb 2013 07:59:03 +0000 Subject: bonding: Fix initialize after use for 3ad machine state spinlock The 3ad machine state spinlock can be used before it is inititialized while doing bond_enslave() (and the port is being initialized) since port->slave is set before the lock is prepared, thus causing soft lock-ups and a multitude of other nasty bugs. [ Rename __initialize_port_locks() variable name to 'slave' -DaveM ] Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 0e45b40..fc58d11 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -389,13 +389,13 @@ static u8 __get_duplex(struct port *port) /** * __initialize_port_locks - initialize a port's STATE machine spinlock - * @port: the port we're looking at + * @port: the slave of the port we're looking at * */ -static inline void __initialize_port_locks(struct port *port) +static inline void __initialize_port_locks(struct slave *slave) { // make sure it isn't called twice - spin_lock_init(&(SLAVE_AD_INFO(port->slave).state_machine_lock)); + spin_lock_init(&(SLAVE_AD_INFO(slave).state_machine_lock)); } //conversions @@ -1910,6 +1910,7 @@ int bond_3ad_bind_slave(struct slave *slave) ad_initialize_port(port, bond->params.lacp_fast); + __initialize_port_locks(slave); port->slave = slave; port->actor_port_number = SLAVE_AD_INFO(slave).id; // key is determined according to the link speed, duplex and user key(which is yet not supported) @@ -1932,8 +1933,6 @@ int bond_3ad_bind_slave(struct slave *slave) port->next_port_in_aggregator = NULL; __disable_port(port); - __initialize_port_locks(port); - // aggregator initialization aggregator = &(SLAVE_AD_INFO(slave).aggregator); -- cgit v0.10.2 From aa0e51cdda005cd37e23751de54443b1e73e7def Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 18 Feb 2013 09:50:52 +0000 Subject: ip_gre: allow CSUM capable devices to handle packets If device is not able to handle checksumming it will be handled in dev_xmit Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index a56f118..cdc31ac 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -745,12 +745,9 @@ static struct sk_buff *handle_offloads(struct sk_buff *skb) goto error; skb_shinfo(skb)->gso_type |= SKB_GSO_GRE; return skb; - } else if (skb->ip_summed == CHECKSUM_PARTIAL) { - err = skb_checksum_help(skb); - if (unlikely(err)) - goto error; } - skb->ip_summed = CHECKSUM_NONE; + if (skb->ip_summed != CHECKSUM_PARTIAL) + skb->ip_summed = CHECKSUM_NONE; return skb; -- cgit v0.10.2 From eb6b9a8cad65e820b145547844b108117cece3a0 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 18 Feb 2013 09:50:53 +0000 Subject: ip_gre: propogate target device GSO capability to the tunnel device Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index cdc31ac..31bc941 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1103,8 +1103,14 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev) tunnel->hlen = addend; /* TCP offload with GRE SEQ is not supported. */ if (!(tunnel->parms.o_flags & GRE_SEQ)) { - dev->features |= NETIF_F_GSO_SOFTWARE; - dev->hw_features |= NETIF_F_GSO_SOFTWARE; + /* device supports enc gso offload*/ + if (tdev->hw_enc_features & NETIF_F_GRE_GSO) { + dev->features |= NETIF_F_TSO; + dev->hw_features |= NETIF_F_TSO; + } else { + dev->features |= NETIF_F_GSO_SOFTWARE; + dev->hw_features |= NETIF_F_GSO_SOFTWARE; + } } return mtu; -- cgit v0.10.2 From 07dcf8e9cc77e86eedfc28fa37713b5471e906b7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 18 Feb 2013 10:20:31 +0000 Subject: net: fec: Do a sanity check on the gpio number Check whether the phy-reset GPIO is valid, prior to requesting it. In the case a board does not provide a phy-reset GPIO, just returns immediately. With such gpio validation in place, it is also safe to change from pr_debug to dev_err in the case the gpio request fails. Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 0fe68c4..29d82cf 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1689,10 +1689,13 @@ static void fec_reset_phy(struct platform_device *pdev) msec = 1; phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); + if (!gpio_is_valid(phy_reset)) + return; + err = devm_gpio_request_one(&pdev->dev, phy_reset, GPIOF_OUT_INIT_LOW, "phy-reset"); if (err) { - pr_debug("FEC: failed to get gpio phy-reset: %d\n", err); + dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); return; } msleep(msec); -- cgit v0.10.2 From d37204566a61d5116d385ae909db8e14a734b30f Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Mon, 18 Feb 2013 10:29:20 +0000 Subject: xen: netback: remove redundant xenvif_put netbk_fatal_tx_err() calls xenvif_carrier_off(), which does a xenvif_put(). As callers of netbk_fatal_tx_err should only have one reference to the vif at this time, then the xenvif_put in netbk_fatal_tx_err is one too many. Signed-off-by: Andrew Jones Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index cd49ba9..28543d6 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -893,7 +893,6 @@ static void netbk_fatal_tx_err(struct xenvif *vif) { netdev_err(vif->dev, "fatal error; disabling device\n"); xenvif_carrier_off(vif); - xenvif_put(vif); } static int netbk_count_requests(struct xenvif *vif, -- cgit v0.10.2 From 7341a73c12b6133aaf3dade95942041043b11ba3 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 18 Feb 2013 10:49:56 +0000 Subject: b44: use netdev_alloc_skb_ip_align() Without this patch b44 always allocates the 2 bytes needed for aligned access on every platform, now it uses netdev_alloc_skb_ip_align(). Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index c030274..a7efec2 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -809,11 +809,10 @@ static int b44_rx(struct b44 *bp, int budget) struct sk_buff *copy_skb; b44_recycle_rx(bp, cons, bp->rx_prod); - copy_skb = netdev_alloc_skb(bp->dev, len + 2); + copy_skb = netdev_alloc_skb_ip_align(bp->dev, len); if (copy_skb == NULL) goto drop_it_no_recycle; - skb_reserve(copy_skb, 2); skb_put(copy_skb, len); /* DMA sync done above, copy just the actual packet */ skb_copy_from_linear_data_offset(skb, RX_PKT_OFFSET, -- cgit v0.10.2 From 0896341a44bf04bf6149d9307fe4686006f3eee1 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Mon, 18 Feb 2013 14:09:42 +0000 Subject: bonding: fix bond_release_all inconsistencies This patch fixes the following inconsistencies in bond_release_all: - IFF_BONDING flag is not stripped from slaves - MTU is not restored - no netdev notifiers are sent Instead of trying to keep bond_release and bond_release_all in sync I think we can re-use bond_release as the environment for calling it is correct (RTNL is held). I have been running tests for the past week and they came out successful. The only way for bond_release to fail is for the slave to be attached in a different bond or to not be a slave but that cannot happen as RTNL is held and no slave manipulations can be achieved. V2: As suggested bond_release is renamed to __bond_release_one with a new parameter "all" introduced so to avoid calling unnecessary code while destroying a bond, and a wrapper for it called bond_release is created because of ndo_del_link. bond_release_all() is removed. Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 94c1534..e242dd1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1937,7 +1937,8 @@ err_undo_flags: /* * Try to release the slave device from the bond device * It is legal to access curr_active_slave without a lock because all the function - * is write-locked. + * is write-locked. If "all" is true it means that the function is being called + * while destroying a bond interface and all slaves are being released. * * The rules for slave state should be: * for Active/Backup: @@ -1945,7 +1946,9 @@ err_undo_flags: * for Bonded connections: * The first up interface should be left on and all others downed. */ -int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) +static int __bond_release_one(struct net_device *bond_dev, + struct net_device *slave_dev, + bool all) { struct bonding *bond = netdev_priv(bond_dev); struct slave *slave, *oldcurrent; @@ -1982,7 +1985,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) synchronize_net(); write_lock_bh(&bond->lock); - if (!bond->params.fail_over_mac) { + if (!all && !bond->params.fail_over_mac) { if (ether_addr_equal(bond_dev->dev_addr, slave->perm_hwaddr) && bond->slave_cnt > 1) pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n", @@ -2028,7 +2031,9 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) write_lock_bh(&bond->lock); } - if (oldcurrent == slave) { + if (all) { + bond->curr_active_slave = NULL; + } else if (oldcurrent == slave) { /* * Note that we hold RTNL over this sequence, so there * is no concern that another slave add/remove event @@ -2117,6 +2122,12 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) return 0; /* deletion OK */ } +/* A wrapper used because of ndo_del_link */ +int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) +{ + return __bond_release_one(bond_dev, slave_dev, false); +} + /* * First release a slave and then destroy the bond if no more slaves are left. * Must be under rtnl_lock when this function is called. @@ -2138,118 +2149,6 @@ static int bond_release_and_destroy(struct net_device *bond_dev, } /* - * This function releases all slaves. - */ -static int bond_release_all(struct net_device *bond_dev) -{ - struct bonding *bond = netdev_priv(bond_dev); - struct slave *slave; - struct net_device *slave_dev; - struct sockaddr addr; - - write_lock_bh(&bond->lock); - - netif_carrier_off(bond_dev); - - if (bond->slave_cnt == 0) - goto out; - - bond->current_arp_slave = NULL; - bond->primary_slave = NULL; - bond_change_active_slave(bond, NULL); - - while ((slave = bond->first_slave) != NULL) { - /* Inform AD package of unbinding of slave - * before slave is detached from the list. - */ - if (bond->params.mode == BOND_MODE_8023AD) - bond_3ad_unbind_slave(slave); - - slave_dev = slave->dev; - bond_detach_slave(bond, slave); - - /* now that the slave is detached, unlock and perform - * all the undo steps that should not be called from - * within a lock. - */ - write_unlock_bh(&bond->lock); - - /* unregister rx_handler early so bond_handle_frame wouldn't - * be called for this slave anymore. - */ - netdev_rx_handler_unregister(slave_dev); - synchronize_net(); - - if (bond_is_lb(bond)) { - /* must be called only after the slave - * has been detached from the list - */ - bond_alb_deinit_slave(bond, slave); - } - - bond_destroy_slave_symlinks(bond_dev, slave_dev); - bond_del_vlans_from_slave(bond, slave_dev); - - /* If the mode USES_PRIMARY, then we should only remove its - * promisc and mc settings if it was the curr_active_slave, but that was - * already taken care of above when we detached the slave - */ - if (!USES_PRIMARY(bond->params.mode)) { - /* unset promiscuity level from slave */ - if (bond_dev->flags & IFF_PROMISC) - dev_set_promiscuity(slave_dev, -1); - - /* unset allmulti level from slave */ - if (bond_dev->flags & IFF_ALLMULTI) - dev_set_allmulti(slave_dev, -1); - - /* flush master's mc_list from slave */ - netif_addr_lock_bh(bond_dev); - bond_mc_list_flush(bond_dev, slave_dev); - netif_addr_unlock_bh(bond_dev); - } - - bond_upper_dev_unlink(bond_dev, slave_dev); - - slave_disable_netpoll(slave); - - /* close slave before restoring its mac address */ - dev_close(slave_dev); - - if (!bond->params.fail_over_mac) { - /* restore original ("permanent") mac address*/ - memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); - addr.sa_family = slave_dev->type; - dev_set_mac_address(slave_dev, &addr); - } - - kfree(slave); - - /* re-acquire the lock before getting the next slave */ - write_lock_bh(&bond->lock); - } - - eth_hw_addr_random(bond_dev); - bond->dev_addr_from_first = true; - - if (bond_vlan_used(bond)) { - pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n", - bond_dev->name, bond_dev->name); - pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n", - bond_dev->name); - } - - pr_info("%s: released all slaves\n", bond_dev->name); - -out: - write_unlock_bh(&bond->lock); - - bond_compute_features(bond); - - return 0; -} - -/* * This function changes the active slave to slave . * It returns -EINVAL in the following cases. * - is not found in the list. @@ -4440,7 +4339,9 @@ static void bond_uninit(struct net_device *bond_dev) bond_netpoll_cleanup(bond_dev); /* Release the bonded slaves */ - bond_release_all(bond_dev); + while (bond->first_slave != NULL) + __bond_release_one(bond_dev, bond->first_slave->dev, true); + pr_info("%s: released all slaves\n", bond_dev->name); list_del(&bond->bond_list); -- cgit v0.10.2 From b3f92b63c4c793142751d029ae0037fb8ab403a0 Mon Sep 17 00:00:00 2001 From: Doug Goldstein Date: Mon, 18 Feb 2013 14:59:23 +0000 Subject: bonding: set sysfs device_type to 'bond' Sets the sysfs device_type to 'bond' for udev. This allows udev rules to be created for bond devices. This is similar to how other network devices set their device_type. Signed-off-by: Doug Goldstein Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index e242dd1..11d01d6 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4264,6 +4264,10 @@ static const struct net_device_ops bond_netdev_ops = { .ndo_fix_features = bond_fix_features, }; +static const struct device_type bond_type = { + .name = "bond", +}; + static void bond_destructor(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); @@ -4294,6 +4298,8 @@ static void bond_setup(struct net_device *bond_dev) bond_dev->destructor = bond_destructor; + SET_NETDEV_DEVTYPE(bond_dev, &bond_type); + /* Initialize the device options */ bond_dev->tx_queue_len = 0; bond_dev->flags |= IFF_MASTER|IFF_MULTICAST; -- cgit v0.10.2 From 45d213f5f8733ab4b5b2424b21c0034d54c5a866 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 18 Feb 2013 17:25:09 +0000 Subject: qmi_wwan, cdc-ether: add ADU960S It advertises a standard CDC-ETHER interface, which actually should be driven by qmi_wwan. Signed-off-by: Dan Williams Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 3f3d12d..57136dc 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -615,6 +615,13 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* AnyDATA ADU960S - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + /* * WHITELIST!!! * diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 19d9035..efb5c7c 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -409,6 +409,13 @@ static const struct usb_device_id products[] = { USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&qmi_wwan_info, }, + { /* ADU960S */ + USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ -- cgit v0.10.2 From 900ff8c6321418dafa03c22e215cb9646a2541b9 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 18 Feb 2013 19:20:33 +0000 Subject: net: move procfs code to net/core/net-procfs.c Similar to net/core/net-sysfs.c, group procfs code to a single unit. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 920361b..f111b4f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2692,9 +2692,9 @@ extern void net_enable_timestamp(void); extern void net_disable_timestamp(void); #ifdef CONFIG_PROC_FS -extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); -extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); -extern void dev_seq_stop(struct seq_file *seq, void *v); +extern int __init dev_proc_init(void); +#else +#define dev_proc_init() 0 #endif extern int netdev_class_create_file(struct class_attribute *class_attr); @@ -2896,4 +2896,34 @@ do { \ }) #endif +/* + * The list of packet types we will receive (as opposed to discard) + * and the routines to invoke. + * + * Why 16. Because with 16 the only overlap we get on a hash of the + * low nibble of the protocol value is RARP/SNAP/X.25. + * + * NOTE: That is no longer true with the addition of VLAN tags. Not + * sure which should go first, but I bet it won't make much + * difference if we are running VLANs. The good news is that + * this protocol won't be in the list unless compiled in, so + * the average user (w/out VLANs) will not be adversely affected. + * --BLG + * + * 0800 IP + * 8100 802.1Q VLAN + * 0001 802.3 + * 0002 AX.25 + * 0004 802.2 + * 8035 RARP + * 0005 SNAP + * 0805 X.25 + * 0806 ARP + * 8137 IPX + * 0009 Localtalk + * 86DD IPv6 + */ +#define PTYPE_HASH_SIZE (16) +#define PTYPE_HASH_MASK (PTYPE_HASH_SIZE - 1) + #endif /* _LINUX_NETDEVICE_H */ diff --git a/net/core/Makefile b/net/core/Makefile index 0c5e361..b33b996 100644 --- a/net/core/Makefile +++ b/net/core/Makefile @@ -13,6 +13,7 @@ obj-y += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \ obj-$(CONFIG_XFRM) += flow.o obj-y += net-sysfs.o +obj-$(CONFIG_PROC_FS) += net-procfs.o obj-$(CONFIG_NET_PKTGEN) += pktgen.o obj-$(CONFIG_NETPOLL) += netpoll.o obj-$(CONFIG_NET_DMA) += user_dma.o diff --git a/net/core/dev.c b/net/core/dev.c index decf55f..8d9ddb0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -97,8 +97,6 @@ #include #include #include -#include -#include #include #include #include @@ -110,7 +108,6 @@ #include #include #include -#include #include #include #include @@ -141,41 +138,10 @@ /* This should be increased if a protocol with a bigger head is added. */ #define GRO_MAX_HEAD (MAX_HEADER + 128) -/* - * The list of packet types we will receive (as opposed to discard) - * and the routines to invoke. - * - * Why 16. Because with 16 the only overlap we get on a hash of the - * low nibble of the protocol value is RARP/SNAP/X.25. - * - * NOTE: That is no longer true with the addition of VLAN tags. Not - * sure which should go first, but I bet it won't make much - * difference if we are running VLANs. The good news is that - * this protocol won't be in the list unless compiled in, so - * the average user (w/out VLANs) will not be adversely affected. - * --BLG - * - * 0800 IP - * 8100 802.1Q VLAN - * 0001 802.3 - * 0002 AX.25 - * 0004 802.2 - * 8035 RARP - * 0005 SNAP - * 0805 X.25 - * 0806 ARP - * 8137 IPX - * 0009 Localtalk - * 86DD IPv6 - */ - -#define PTYPE_HASH_SIZE (16) -#define PTYPE_HASH_MASK (PTYPE_HASH_SIZE - 1) - static DEFINE_SPINLOCK(ptype_lock); static DEFINE_SPINLOCK(offload_lock); -static struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; -static struct list_head ptype_all __read_mostly; /* Taps */ +struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; +struct list_head ptype_all __read_mostly; /* Taps */ static struct list_head offload_base __read_mostly; /* @@ -4217,352 +4183,6 @@ softnet_break: goto out; } -#ifdef CONFIG_PROC_FS - -#define BUCKET_SPACE (32 - NETDEV_HASHBITS - 1) - -#define get_bucket(x) ((x) >> BUCKET_SPACE) -#define get_offset(x) ((x) & ((1 << BUCKET_SPACE) - 1)) -#define set_bucket_offset(b, o) ((b) << BUCKET_SPACE | (o)) - -static inline struct net_device *dev_from_same_bucket(struct seq_file *seq, loff_t *pos) -{ - struct net *net = seq_file_net(seq); - struct net_device *dev; - struct hlist_node *p; - struct hlist_head *h; - unsigned int count = 0, offset = get_offset(*pos); - - h = &net->dev_name_head[get_bucket(*pos)]; - hlist_for_each_entry_rcu(dev, p, h, name_hlist) { - if (++count == offset) - return dev; - } - - return NULL; -} - -static inline struct net_device *dev_from_bucket(struct seq_file *seq, loff_t *pos) -{ - struct net_device *dev; - unsigned int bucket; - - do { - dev = dev_from_same_bucket(seq, pos); - if (dev) - return dev; - - bucket = get_bucket(*pos) + 1; - *pos = set_bucket_offset(bucket, 1); - } while (bucket < NETDEV_HASHENTRIES); - - return NULL; -} - -/* - * This is invoked by the /proc filesystem handler to display a device - * in detail. - */ -void *dev_seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) -{ - rcu_read_lock(); - if (!*pos) - return SEQ_START_TOKEN; - - if (get_bucket(*pos) >= NETDEV_HASHENTRIES) - return NULL; - - return dev_from_bucket(seq, pos); -} - -void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - ++*pos; - return dev_from_bucket(seq, pos); -} - -void dev_seq_stop(struct seq_file *seq, void *v) - __releases(RCU) -{ - rcu_read_unlock(); -} - -static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev) -{ - struct rtnl_link_stats64 temp; - const struct rtnl_link_stats64 *stats = dev_get_stats(dev, &temp); - - seq_printf(seq, "%6s: %7llu %7llu %4llu %4llu %4llu %5llu %10llu %9llu " - "%8llu %7llu %4llu %4llu %4llu %5llu %7llu %10llu\n", - dev->name, stats->rx_bytes, stats->rx_packets, - stats->rx_errors, - stats->rx_dropped + stats->rx_missed_errors, - stats->rx_fifo_errors, - stats->rx_length_errors + stats->rx_over_errors + - stats->rx_crc_errors + stats->rx_frame_errors, - stats->rx_compressed, stats->multicast, - stats->tx_bytes, stats->tx_packets, - stats->tx_errors, stats->tx_dropped, - stats->tx_fifo_errors, stats->collisions, - stats->tx_carrier_errors + - stats->tx_aborted_errors + - stats->tx_window_errors + - stats->tx_heartbeat_errors, - stats->tx_compressed); -} - -/* - * Called from the PROCfs module. This now uses the new arbitrary sized - * /proc/net interface to create /proc/net/dev - */ -static int dev_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) - seq_puts(seq, "Inter-| Receive " - " | Transmit\n" - " face |bytes packets errs drop fifo frame " - "compressed multicast|bytes packets errs " - "drop fifo colls carrier compressed\n"); - else - dev_seq_printf_stats(seq, v); - return 0; -} - -static struct softnet_data *softnet_get_online(loff_t *pos) -{ - struct softnet_data *sd = NULL; - - while (*pos < nr_cpu_ids) - if (cpu_online(*pos)) { - sd = &per_cpu(softnet_data, *pos); - break; - } else - ++*pos; - return sd; -} - -static void *softnet_seq_start(struct seq_file *seq, loff_t *pos) -{ - return softnet_get_online(pos); -} - -static void *softnet_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - ++*pos; - return softnet_get_online(pos); -} - -static void softnet_seq_stop(struct seq_file *seq, void *v) -{ -} - -static int softnet_seq_show(struct seq_file *seq, void *v) -{ - struct softnet_data *sd = v; - - seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x %08x\n", - sd->processed, sd->dropped, sd->time_squeeze, 0, - 0, 0, 0, 0, /* was fastroute */ - sd->cpu_collision, sd->received_rps); - return 0; -} - -static const struct seq_operations dev_seq_ops = { - .start = dev_seq_start, - .next = dev_seq_next, - .stop = dev_seq_stop, - .show = dev_seq_show, -}; - -static int dev_seq_open(struct inode *inode, struct file *file) -{ - return seq_open_net(inode, file, &dev_seq_ops, - sizeof(struct seq_net_private)); -} - -static const struct file_operations dev_seq_fops = { - .owner = THIS_MODULE, - .open = dev_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release_net, -}; - -static const struct seq_operations softnet_seq_ops = { - .start = softnet_seq_start, - .next = softnet_seq_next, - .stop = softnet_seq_stop, - .show = softnet_seq_show, -}; - -static int softnet_seq_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &softnet_seq_ops); -} - -static const struct file_operations softnet_seq_fops = { - .owner = THIS_MODULE, - .open = softnet_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static void *ptype_get_idx(loff_t pos) -{ - struct packet_type *pt = NULL; - loff_t i = 0; - int t; - - list_for_each_entry_rcu(pt, &ptype_all, list) { - if (i == pos) - return pt; - ++i; - } - - for (t = 0; t < PTYPE_HASH_SIZE; t++) { - list_for_each_entry_rcu(pt, &ptype_base[t], list) { - if (i == pos) - return pt; - ++i; - } - } - return NULL; -} - -static void *ptype_seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) -{ - rcu_read_lock(); - return *pos ? ptype_get_idx(*pos - 1) : SEQ_START_TOKEN; -} - -static void *ptype_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct packet_type *pt; - struct list_head *nxt; - int hash; - - ++*pos; - if (v == SEQ_START_TOKEN) - return ptype_get_idx(0); - - pt = v; - nxt = pt->list.next; - if (pt->type == htons(ETH_P_ALL)) { - if (nxt != &ptype_all) - goto found; - hash = 0; - nxt = ptype_base[0].next; - } else - hash = ntohs(pt->type) & PTYPE_HASH_MASK; - - while (nxt == &ptype_base[hash]) { - if (++hash >= PTYPE_HASH_SIZE) - return NULL; - nxt = ptype_base[hash].next; - } -found: - return list_entry(nxt, struct packet_type, list); -} - -static void ptype_seq_stop(struct seq_file *seq, void *v) - __releases(RCU) -{ - rcu_read_unlock(); -} - -static int ptype_seq_show(struct seq_file *seq, void *v) -{ - struct packet_type *pt = v; - - if (v == SEQ_START_TOKEN) - seq_puts(seq, "Type Device Function\n"); - else if (pt->dev == NULL || dev_net(pt->dev) == seq_file_net(seq)) { - if (pt->type == htons(ETH_P_ALL)) - seq_puts(seq, "ALL "); - else - seq_printf(seq, "%04x", ntohs(pt->type)); - - seq_printf(seq, " %-8s %pF\n", - pt->dev ? pt->dev->name : "", pt->func); - } - - return 0; -} - -static const struct seq_operations ptype_seq_ops = { - .start = ptype_seq_start, - .next = ptype_seq_next, - .stop = ptype_seq_stop, - .show = ptype_seq_show, -}; - -static int ptype_seq_open(struct inode *inode, struct file *file) -{ - return seq_open_net(inode, file, &ptype_seq_ops, - sizeof(struct seq_net_private)); -} - -static const struct file_operations ptype_seq_fops = { - .owner = THIS_MODULE, - .open = ptype_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release_net, -}; - - -static int __net_init dev_proc_net_init(struct net *net) -{ - int rc = -ENOMEM; - - if (!proc_create("dev", S_IRUGO, net->proc_net, &dev_seq_fops)) - goto out; - if (!proc_create("softnet_stat", S_IRUGO, net->proc_net, - &softnet_seq_fops)) - goto out_dev; - if (!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops)) - goto out_softnet; - - if (wext_proc_init(net)) - goto out_ptype; - rc = 0; -out: - return rc; -out_ptype: - remove_proc_entry("ptype", net->proc_net); -out_softnet: - remove_proc_entry("softnet_stat", net->proc_net); -out_dev: - remove_proc_entry("dev", net->proc_net); - goto out; -} - -static void __net_exit dev_proc_net_exit(struct net *net) -{ - wext_proc_exit(net); - - remove_proc_entry("ptype", net->proc_net); - remove_proc_entry("softnet_stat", net->proc_net); - remove_proc_entry("dev", net->proc_net); -} - -static struct pernet_operations __net_initdata dev_proc_ops = { - .init = dev_proc_net_init, - .exit = dev_proc_net_exit, -}; - -static int __init dev_proc_init(void) -{ - return register_pernet_subsys(&dev_proc_ops); -} -#else -#define dev_proc_init() 0 -#endif /* CONFIG_PROC_FS */ - - struct netdev_upper { struct net_device *dev; bool master; diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 8956252..bd2eb9d 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -15,7 +15,6 @@ #include #include #include -#include /* * General list handling functions @@ -727,76 +726,3 @@ void dev_mc_init(struct net_device *dev) __hw_addr_init(&dev->mc); } EXPORT_SYMBOL(dev_mc_init); - -#ifdef CONFIG_PROC_FS -#include - -static int dev_mc_seq_show(struct seq_file *seq, void *v) -{ - struct netdev_hw_addr *ha; - struct net_device *dev = v; - - if (v == SEQ_START_TOKEN) - return 0; - - netif_addr_lock_bh(dev); - netdev_for_each_mc_addr(ha, dev) { - int i; - - seq_printf(seq, "%-4d %-15s %-5d %-5d ", dev->ifindex, - dev->name, ha->refcount, ha->global_use); - - for (i = 0; i < dev->addr_len; i++) - seq_printf(seq, "%02x", ha->addr[i]); - - seq_putc(seq, '\n'); - } - netif_addr_unlock_bh(dev); - return 0; -} - -static const struct seq_operations dev_mc_seq_ops = { - .start = dev_seq_start, - .next = dev_seq_next, - .stop = dev_seq_stop, - .show = dev_mc_seq_show, -}; - -static int dev_mc_seq_open(struct inode *inode, struct file *file) -{ - return seq_open_net(inode, file, &dev_mc_seq_ops, - sizeof(struct seq_net_private)); -} - -static const struct file_operations dev_mc_seq_fops = { - .owner = THIS_MODULE, - .open = dev_mc_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release_net, -}; - -#endif - -static int __net_init dev_mc_net_init(struct net *net) -{ - if (!proc_create("dev_mcast", 0, net->proc_net, &dev_mc_seq_fops)) - return -ENOMEM; - return 0; -} - -static void __net_exit dev_mc_net_exit(struct net *net) -{ - remove_proc_entry("dev_mcast", net->proc_net); -} - -static struct pernet_operations __net_initdata dev_mc_net_ops = { - .init = dev_mc_net_init, - .exit = dev_mc_net_exit, -}; - -void __init dev_mcast_init(void) -{ - register_pernet_subsys(&dev_mc_net_ops); -} - diff --git a/net/core/net-procfs.c b/net/core/net-procfs.c new file mode 100644 index 0000000..ac87066 --- /dev/null +++ b/net/core/net-procfs.c @@ -0,0 +1,414 @@ +#include +#include +#include +#include + +#define BUCKET_SPACE (32 - NETDEV_HASHBITS - 1) + +#define get_bucket(x) ((x) >> BUCKET_SPACE) +#define get_offset(x) ((x) & ((1 << BUCKET_SPACE) - 1)) +#define set_bucket_offset(b, o) ((b) << BUCKET_SPACE | (o)) + +extern struct list_head ptype_all __read_mostly; +extern struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; + +static inline struct net_device *dev_from_same_bucket(struct seq_file *seq, loff_t *pos) +{ + struct net *net = seq_file_net(seq); + struct net_device *dev; + struct hlist_node *p; + struct hlist_head *h; + unsigned int count = 0, offset = get_offset(*pos); + + h = &net->dev_name_head[get_bucket(*pos)]; + hlist_for_each_entry_rcu(dev, p, h, name_hlist) { + if (++count == offset) + return dev; + } + + return NULL; +} + +static inline struct net_device *dev_from_bucket(struct seq_file *seq, loff_t *pos) +{ + struct net_device *dev; + unsigned int bucket; + + do { + dev = dev_from_same_bucket(seq, pos); + if (dev) + return dev; + + bucket = get_bucket(*pos) + 1; + *pos = set_bucket_offset(bucket, 1); + } while (bucket < NETDEV_HASHENTRIES); + + return NULL; +} + +/* + * This is invoked by the /proc filesystem handler to display a device + * in detail. + */ +static void *dev_seq_start(struct seq_file *seq, loff_t *pos) + __acquires(RCU) +{ + rcu_read_lock(); + if (!*pos) + return SEQ_START_TOKEN; + + if (get_bucket(*pos) >= NETDEV_HASHENTRIES) + return NULL; + + return dev_from_bucket(seq, pos); +} + +static void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ++*pos; + return dev_from_bucket(seq, pos); +} + +static void dev_seq_stop(struct seq_file *seq, void *v) + __releases(RCU) +{ + rcu_read_unlock(); +} + +static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev) +{ + struct rtnl_link_stats64 temp; + const struct rtnl_link_stats64 *stats = dev_get_stats(dev, &temp); + + seq_printf(seq, "%6s: %7llu %7llu %4llu %4llu %4llu %5llu %10llu %9llu " + "%8llu %7llu %4llu %4llu %4llu %5llu %7llu %10llu\n", + dev->name, stats->rx_bytes, stats->rx_packets, + stats->rx_errors, + stats->rx_dropped + stats->rx_missed_errors, + stats->rx_fifo_errors, + stats->rx_length_errors + stats->rx_over_errors + + stats->rx_crc_errors + stats->rx_frame_errors, + stats->rx_compressed, stats->multicast, + stats->tx_bytes, stats->tx_packets, + stats->tx_errors, stats->tx_dropped, + stats->tx_fifo_errors, stats->collisions, + stats->tx_carrier_errors + + stats->tx_aborted_errors + + stats->tx_window_errors + + stats->tx_heartbeat_errors, + stats->tx_compressed); +} + +/* + * Called from the PROCfs module. This now uses the new arbitrary sized + * /proc/net interface to create /proc/net/dev + */ +static int dev_seq_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) + seq_puts(seq, "Inter-| Receive " + " | Transmit\n" + " face |bytes packets errs drop fifo frame " + "compressed multicast|bytes packets errs " + "drop fifo colls carrier compressed\n"); + else + dev_seq_printf_stats(seq, v); + return 0; +} + +static struct softnet_data *softnet_get_online(loff_t *pos) +{ + struct softnet_data *sd = NULL; + + while (*pos < nr_cpu_ids) + if (cpu_online(*pos)) { + sd = &per_cpu(softnet_data, *pos); + break; + } else + ++*pos; + return sd; +} + +static void *softnet_seq_start(struct seq_file *seq, loff_t *pos) +{ + return softnet_get_online(pos); +} + +static void *softnet_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ++*pos; + return softnet_get_online(pos); +} + +static void softnet_seq_stop(struct seq_file *seq, void *v) +{ +} + +static int softnet_seq_show(struct seq_file *seq, void *v) +{ + struct softnet_data *sd = v; + + seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x %08x\n", + sd->processed, sd->dropped, sd->time_squeeze, 0, + 0, 0, 0, 0, /* was fastroute */ + sd->cpu_collision, sd->received_rps); + return 0; +} + +static const struct seq_operations dev_seq_ops = { + .start = dev_seq_start, + .next = dev_seq_next, + .stop = dev_seq_stop, + .show = dev_seq_show, +}; + +static int dev_seq_open(struct inode *inode, struct file *file) +{ + return seq_open_net(inode, file, &dev_seq_ops, + sizeof(struct seq_net_private)); +} + +static const struct file_operations dev_seq_fops = { + .owner = THIS_MODULE, + .open = dev_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_net, +}; + +static const struct seq_operations softnet_seq_ops = { + .start = softnet_seq_start, + .next = softnet_seq_next, + .stop = softnet_seq_stop, + .show = softnet_seq_show, +}; + +static int softnet_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &softnet_seq_ops); +} + +static const struct file_operations softnet_seq_fops = { + .owner = THIS_MODULE, + .open = softnet_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static void *ptype_get_idx(loff_t pos) +{ + struct packet_type *pt = NULL; + loff_t i = 0; + int t; + + list_for_each_entry_rcu(pt, &ptype_all, list) { + if (i == pos) + return pt; + ++i; + } + + for (t = 0; t < PTYPE_HASH_SIZE; t++) { + list_for_each_entry_rcu(pt, &ptype_base[t], list) { + if (i == pos) + return pt; + ++i; + } + } + return NULL; +} + +static void *ptype_seq_start(struct seq_file *seq, loff_t *pos) + __acquires(RCU) +{ + rcu_read_lock(); + return *pos ? ptype_get_idx(*pos - 1) : SEQ_START_TOKEN; +} + +static void *ptype_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + struct packet_type *pt; + struct list_head *nxt; + int hash; + + ++*pos; + if (v == SEQ_START_TOKEN) + return ptype_get_idx(0); + + pt = v; + nxt = pt->list.next; + if (pt->type == htons(ETH_P_ALL)) { + if (nxt != &ptype_all) + goto found; + hash = 0; + nxt = ptype_base[0].next; + } else + hash = ntohs(pt->type) & PTYPE_HASH_MASK; + + while (nxt == &ptype_base[hash]) { + if (++hash >= PTYPE_HASH_SIZE) + return NULL; + nxt = ptype_base[hash].next; + } +found: + return list_entry(nxt, struct packet_type, list); +} + +static void ptype_seq_stop(struct seq_file *seq, void *v) + __releases(RCU) +{ + rcu_read_unlock(); +} + +static int ptype_seq_show(struct seq_file *seq, void *v) +{ + struct packet_type *pt = v; + + if (v == SEQ_START_TOKEN) + seq_puts(seq, "Type Device Function\n"); + else if (pt->dev == NULL || dev_net(pt->dev) == seq_file_net(seq)) { + if (pt->type == htons(ETH_P_ALL)) + seq_puts(seq, "ALL "); + else + seq_printf(seq, "%04x", ntohs(pt->type)); + + seq_printf(seq, " %-8s %pF\n", + pt->dev ? pt->dev->name : "", pt->func); + } + + return 0; +} + +static const struct seq_operations ptype_seq_ops = { + .start = ptype_seq_start, + .next = ptype_seq_next, + .stop = ptype_seq_stop, + .show = ptype_seq_show, +}; + +static int ptype_seq_open(struct inode *inode, struct file *file) +{ + return seq_open_net(inode, file, &ptype_seq_ops, + sizeof(struct seq_net_private)); +} + +static const struct file_operations ptype_seq_fops = { + .owner = THIS_MODULE, + .open = ptype_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_net, +}; + + +static int __net_init dev_proc_net_init(struct net *net) +{ + int rc = -ENOMEM; + + if (!proc_create("dev", S_IRUGO, net->proc_net, &dev_seq_fops)) + goto out; + if (!proc_create("softnet_stat", S_IRUGO, net->proc_net, + &softnet_seq_fops)) + goto out_dev; + if (!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops)) + goto out_softnet; + + if (wext_proc_init(net)) + goto out_ptype; + rc = 0; +out: + return rc; +out_ptype: + remove_proc_entry("ptype", net->proc_net); +out_softnet: + remove_proc_entry("softnet_stat", net->proc_net); +out_dev: + remove_proc_entry("dev", net->proc_net); + goto out; +} + +static void __net_exit dev_proc_net_exit(struct net *net) +{ + wext_proc_exit(net); + + remove_proc_entry("ptype", net->proc_net); + remove_proc_entry("softnet_stat", net->proc_net); + remove_proc_entry("dev", net->proc_net); +} + +static struct pernet_operations __net_initdata dev_proc_ops = { + .init = dev_proc_net_init, + .exit = dev_proc_net_exit, +}; + +int __init dev_proc_init(void) +{ + return register_pernet_subsys(&dev_proc_ops); +} + +static int dev_mc_seq_show(struct seq_file *seq, void *v) +{ + struct netdev_hw_addr *ha; + struct net_device *dev = v; + + if (v == SEQ_START_TOKEN) + return 0; + + netif_addr_lock_bh(dev); + netdev_for_each_mc_addr(ha, dev) { + int i; + + seq_printf(seq, "%-4d %-15s %-5d %-5d ", dev->ifindex, + dev->name, ha->refcount, ha->global_use); + + for (i = 0; i < dev->addr_len; i++) + seq_printf(seq, "%02x", ha->addr[i]); + + seq_putc(seq, '\n'); + } + netif_addr_unlock_bh(dev); + return 0; +} + +static const struct seq_operations dev_mc_seq_ops = { + .start = dev_seq_start, + .next = dev_seq_next, + .stop = dev_seq_stop, + .show = dev_mc_seq_show, +}; + +static int dev_mc_seq_open(struct inode *inode, struct file *file) +{ + return seq_open_net(inode, file, &dev_mc_seq_ops, + sizeof(struct seq_net_private)); +} + +static const struct file_operations dev_mc_seq_fops = { + .owner = THIS_MODULE, + .open = dev_mc_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_net, +}; + +static int __net_init dev_mc_net_init(struct net *net) +{ + if (!proc_create("dev_mcast", 0, net->proc_net, &dev_mc_seq_fops)) + return -ENOMEM; + return 0; +} + +static void __net_exit dev_mc_net_exit(struct net *net) +{ + remove_proc_entry("dev_mcast", net->proc_net); +} + +static struct pernet_operations __net_initdata dev_mc_net_ops = { + .init = dev_mc_net_init, + .exit = dev_mc_net_exit, +}; + +void __init dev_mcast_init(void) +{ + register_pernet_subsys(&dev_mc_net_ops); +} -- cgit v0.10.2 From 629821d9b05254063df774594cfe15c0343b73f2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 19 Feb 2013 13:04:34 -0500 Subject: Revert "xen: netback: remove redundant xenvif_put" This reverts commit d37204566a61d5116d385ae909db8e14a734b30f. This change is incorrect, as per Jan Beulich: ==================== But this is wrong from all we can tell, we discussed this before (Wei pointed to the discussion in an earlier reply). The core of it is that the put here parallels the one in netbk_tx_err(), and the one in xenvif_carrier_off() matches the get from xenvif_connect() (which normally would be done on the path coming through xenvif_disconnect()). ==================== And a previous discussion of this issue is at: http://marc.info/?l=xen-devel&m=136084174026977&w=2 Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 28543d6..cd49ba9 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -893,6 +893,7 @@ static void netbk_fatal_tx_err(struct xenvif *vif) { netdev_err(vif->dev, "fatal error; disabling device\n"); xenvif_carrier_off(vif); + xenvif_put(vif); } static int netbk_count_requests(struct xenvif *vif, -- cgit v0.10.2 From 4fc1a601f147abe3bfb4d70fe718110ed21953e1 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Tue, 19 Feb 2013 00:43:10 +0000 Subject: net: proc: fix build failed when procfs is not configured commit d4beaa66add8aebf83ab16d2fde4e4de8dac36df "net: proc: change proc_net_fops_create to proc_create" uses proc_create to replace proc_net_fops_create, when CONFIG_PROC isn't configured, some build error will occurs. net/packet/af_packet.c: In function 'packet_net_init': net/packet/af_packet.c:3831:48: error: 'packet_seq_fops' undeclared (first use in this function) net/packet/af_packet.c:3831:48: note: each undeclared identifier is reported only once for each function it appears in There may be other build fails like above,this patch change proc_create from function to macros when CONFIG_PROC is not configured,just like what proc_net_fops_create did before this commit. Reported-by: Fengguang Wu Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 319f694..d0a1f2c 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -187,12 +187,9 @@ static inline void proc_flush_task(struct task_struct *task) static inline struct proc_dir_entry *create_proc_entry(const char *name, umode_t mode, struct proc_dir_entry *parent) { return NULL; } -static inline struct proc_dir_entry *proc_create(const char *name, - umode_t mode, struct proc_dir_entry *parent, - const struct file_operations *proc_fops) -{ - return NULL; -} + +#define proc_create(name, mode, parent, fops) ({ (void)(mode), NULL; }) + static inline struct proc_dir_entry *proc_create_data(const char *name, umode_t mode, struct proc_dir_entry *parent, const struct file_operations *proc_fops, void *data) -- cgit v0.10.2 From 082c7ca42b0bf33aa3fb5eeb619dfbcfaa20d216 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Tue, 19 Feb 2013 00:43:12 +0000 Subject: net: ipv4: fix waring -Wunused-variable the vars ip_rt_gc_timeout is used only when CONFIG_SYSCTL is selected. move these vars into CONFIG_SYSCTL. Signed-off-by: Gao feng Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 3bdd1b1..6e28514 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -117,15 +117,11 @@ #define RT_GC_TIMEOUT (300*HZ) static int ip_rt_max_size; -static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT; -static int ip_rt_gc_interval __read_mostly = 60 * HZ; -static int ip_rt_gc_min_interval __read_mostly = HZ / 2; static int ip_rt_redirect_number __read_mostly = 9; static int ip_rt_redirect_load __read_mostly = HZ / 50; static int ip_rt_redirect_silence __read_mostly = ((HZ / 50) << (9 + 1)); static int ip_rt_error_cost __read_mostly = HZ; static int ip_rt_error_burst __read_mostly = 5 * HZ; -static int ip_rt_gc_elasticity __read_mostly = 8; static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ; static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20; static int ip_rt_min_advmss __read_mostly = 256; @@ -2423,6 +2419,11 @@ void ip_rt_multicast_event(struct in_device *in_dev) } #ifdef CONFIG_SYSCTL +static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT; +static int ip_rt_gc_interval __read_mostly = 60 * HZ; +static int ip_rt_gc_min_interval __read_mostly = HZ / 2; +static int ip_rt_gc_elasticity __read_mostly = 8; + static int ipv4_sysctl_rtcache_flush(ctl_table *__ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) -- cgit v0.10.2 From cd0615746ba0f6643fb984345ae6ee0b73404ca6 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 19 Feb 2013 02:47:05 +0000 Subject: net: fix a build failure when !CONFIG_PROC_FS When !CONFIG_PROC_FS dev_mcast_init() is not defined, actually we can just merge dev_mcast_init() into dev_proc_init(). Reported-by: Gao feng Cc: Gao feng Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f111b4f..b3d00fa 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2646,7 +2646,6 @@ extern void netdev_notify_peers(struct net_device *dev); extern void netdev_features_change(struct net_device *dev); /* Load a device via the kmod */ extern void dev_load(struct net *net, const char *name); -extern void dev_mcast_init(void); extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev, struct rtnl_link_stats64 *storage); extern void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64, diff --git a/net/core/dev.c b/net/core/dev.c index 8d9ddb0..17bc535 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6260,7 +6260,6 @@ static int __init net_dev_init(void) hotcpu_notifier(dev_cpu_callback, 0); dst_init(); - dev_mcast_init(); rc = 0; out: return rc; diff --git a/net/core/net-procfs.c b/net/core/net-procfs.c index ac87066..0f6bb6f 100644 --- a/net/core/net-procfs.c +++ b/net/core/net-procfs.c @@ -341,11 +341,6 @@ static struct pernet_operations __net_initdata dev_proc_ops = { .exit = dev_proc_net_exit, }; -int __init dev_proc_init(void) -{ - return register_pernet_subsys(&dev_proc_ops); -} - static int dev_mc_seq_show(struct seq_file *seq, void *v) { struct netdev_hw_addr *ha; @@ -408,7 +403,10 @@ static struct pernet_operations __net_initdata dev_mc_net_ops = { .exit = dev_mc_net_exit, }; -void __init dev_mcast_init(void) +int __init dev_proc_init(void) { - register_pernet_subsys(&dev_mc_net_ops); + int ret = register_pernet_subsys(&dev_proc_ops); + if (!ret) + return register_pernet_subsys(&dev_mc_net_ops); + return ret; } -- cgit v0.10.2 From 7cb08d7f3a5ea6131f4f243c2080530ac41cb293 Mon Sep 17 00:00:00 2001 From: "Huang, Xiong" Date: Tue, 19 Feb 2013 07:23:09 +0000 Subject: atl1c: restore buffer state in the previous commit : f1f220ea1dda078, the BUSY state of buffer is wrongly deleted. this patch just restore it. Signed-off-by: xiong Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 8f33315..1f07fc6 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2072,7 +2072,7 @@ static int atl1c_tx_map(struct atl1c_adapter *adapter, if (unlikely(pci_dma_mapping_error(adapter->pdev, buffer_info->dma))) goto err_dma; - + ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY); ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE, ATL1C_PCIMAP_TODEVICE); mapped_len += map_len; -- cgit v0.10.2 From 303c07db487be59ae9fda10600ea65ca11c21497 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 Feb 2013 10:42:03 -0800 Subject: ppp: set qdisc_tx_busylock to avoid LOCKDEP splat If a qdisc is installed on a ppp device, its possible to get a lockdep splat under stress, because nested dev_queue_xmit() can lock busylock a second time (on a different device, so its a false positive) Avoid this problem using a distinct lock_class_key for ppp devices. Reported-by: Yanko Kaneti Tested-by: Yanko Kaneti Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 4fd754e..3db9131 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -1058,7 +1058,15 @@ ppp_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats64) return stats64; } +static struct lock_class_key ppp_tx_busylock; +static int ppp_dev_init(struct net_device *dev) +{ + dev->qdisc_tx_busylock = &ppp_tx_busylock; + return 0; +} + static const struct net_device_ops ppp_netdev_ops = { + .ndo_init = ppp_dev_init, .ndo_start_xmit = ppp_start_xmit, .ndo_do_ioctl = ppp_net_ioctl, .ndo_get_stats64 = ppp_get_stats64, -- cgit v0.10.2 From 4aa896c4baaab2b4f499c7434f85457f9f3d9fe4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 Feb 2013 12:14:10 +0000 Subject: ip_gre: remove an extra dst_release() commit 68c331631143 (v4 GRE: Add TCP segmentation offload for GRE) introduced a bug in error path. dst is attached to skb, so will be released when skb is freed. Signed-off-by: Eric Dumazet Cc: Pravin B Shelar Acked-by: Pravin B Shelar Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 31bc941..5ef4da7 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1006,10 +1006,8 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev if (skb_has_shared_frag(skb)) { err = __skb_linearize(skb); - if (err) { - ip_rt_put(rt); + if (err) goto tx_error; - } } *ptr = 0; -- cgit v0.10.2 From 68534c682e8f5c333f835818ca5a89d3e6288870 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Tue, 19 Feb 2013 22:51:30 +0000 Subject: net: fix a wrong assignment in skb_split() commit c9af6db4c11ccc6c3e7f1 (net: Fix possible wrong checksum generation) has a suspicous piece: - skb_shinfo(skb1)->gso_type = skb_shinfo(skb)->gso_type; - + skb_shinfo(skb)->tx_flags = skb_shinfo(skb1)->tx_flags & SKBTX_SHARED_FRAG; skb1 is the new skb, therefore should be on the left side of the assignment. This patch fixes it. Cc: Pravin B Shelar Cc: David S. Miller Signed-off-by: Cong Wang Acked-by: Pravin B Shelar Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 2a3ca33..33245ef 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2326,7 +2326,7 @@ void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len) { int pos = skb_headlen(skb); - skb_shinfo(skb)->tx_flags = skb_shinfo(skb1)->tx_flags & SKBTX_SHARED_FRAG; + skb_shinfo(skb1)->tx_flags = skb_shinfo(skb)->tx_flags & SKBTX_SHARED_FRAG; if (len < pos) /* Split line is inside header. */ skb_split_inside_header(skb, skb1, len, pos); else /* Second chunk has no header, nothing to copy. */ -- cgit v0.10.2 From ecd9883724b78cc72ed92c98bcb1a46c764fff21 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Wed, 20 Feb 2013 00:29:08 +0000 Subject: ipv6: fix race condition regarding dst->expires and dst->from. Eric Dumazet wrote: | Some strange crashes happen in rt6_check_expired(), with access | to random addresses. | | At first glance, it looks like the RTF_EXPIRES and | stuff added in commit 1716a96101c49186b | (ipv6: fix problem with expired dst cache) | are racy : same dst could be manipulated at the same time | on different cpus. | | At some point, our stack believes rt->dst.from contains a dst pointer, | while its really a jiffie value (as rt->dst.expires shares the same area | of memory) | | rt6_update_expires() should be fixed, or am I missing something ? | | CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060 Because we do not have any locks for dst_entry, we cannot change essential structure in the entry; e.g., we cannot change reference to other entity. To fix this issue, split 'from' and 'expires' field in dst_entry out of union. Once it is 'from' is assigned in the constructor, keep the reference until the very last stage of the life time of the object. Of course, it is unsafe to change 'from', so make rt6_set_from simple just for fresh entries. Reported-by: Eric Dumazet Reported-by: Neil Horman CC: Gao Feng Signed-off-by: YOSHIFUJI Hideaki Reviewed-by: Eric Dumazet Reported-by: Steinar H. Gunderson Reviewed-by: Neil Horman Signed-off-by: David S. Miller diff --git a/include/net/dst.h b/include/net/dst.h index 3da47e0..853cda1 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -36,13 +36,9 @@ struct dst_entry { struct net_device *dev; struct dst_ops *ops; unsigned long _metrics; - union { - unsigned long expires; - /* point to where the dst_entry copied from */ - struct dst_entry *from; - }; + unsigned long expires; struct dst_entry *path; - void *__pad0; + struct dst_entry *from; #ifdef CONFIG_XFRM struct xfrm_state *xfrm; #else diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 6919a50..2a601e7 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -164,50 +164,35 @@ static inline struct inet6_dev *ip6_dst_idev(struct dst_entry *dst) static inline void rt6_clean_expires(struct rt6_info *rt) { - if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) - dst_release(rt->dst.from); - rt->rt6i_flags &= ~RTF_EXPIRES; - rt->dst.from = NULL; } static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires) { - if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) - dst_release(rt->dst.from); - - rt->rt6i_flags |= RTF_EXPIRES; rt->dst.expires = expires; + rt->rt6i_flags |= RTF_EXPIRES; } -static inline void rt6_update_expires(struct rt6_info *rt, int timeout) +static inline void rt6_update_expires(struct rt6_info *rt0, int timeout) { - if (!(rt->rt6i_flags & RTF_EXPIRES)) { - if (rt->dst.from) - dst_release(rt->dst.from); - /* dst_set_expires relies on expires == 0 - * if it has not been set previously. - */ - rt->dst.expires = 0; - } - - dst_set_expires(&rt->dst, timeout); - rt->rt6i_flags |= RTF_EXPIRES; + struct rt6_info *rt; + + for (rt = rt0; rt && !(rt->rt6i_flags & RTF_EXPIRES); + rt = (struct rt6_info *)rt->dst.from); + if (rt && rt != rt0) + rt0->dst.expires = rt->dst.expires; + + dst_set_expires(&rt0->dst, timeout); + rt0->rt6i_flags |= RTF_EXPIRES; } static inline void rt6_set_from(struct rt6_info *rt, struct rt6_info *from) { struct dst_entry *new = (struct dst_entry *) from; - if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) { - if (new == rt->dst.from) - return; - dst_release(rt->dst.from); - } - rt->rt6i_flags &= ~RTF_EXPIRES; - rt->dst.from = new; dst_hold(new); + rt->dst.from = new; } static inline void ip6_rt_put(struct rt6_info *rt) diff --git a/net/core/dst.c b/net/core/dst.c index ee6153e..35fd12f 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -179,6 +179,7 @@ void *dst_alloc(struct dst_ops *ops, struct net_device *dev, dst_init_metrics(dst, dst_default_metrics, true); dst->expires = 0UL; dst->path = dst; + dst->from = NULL; #ifdef CONFIG_XFRM dst->xfrm = NULL; #endif diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 515bb51..9282665 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -287,6 +287,7 @@ static void ip6_dst_destroy(struct dst_entry *dst) { struct rt6_info *rt = (struct rt6_info *)dst; struct inet6_dev *idev = rt->rt6i_idev; + struct dst_entry *from = dst->from; if (!(rt->dst.flags & DST_HOST)) dst_destroy_metrics_generic(dst); @@ -296,8 +297,8 @@ static void ip6_dst_destroy(struct dst_entry *dst) in6_dev_put(idev); } - if (!(rt->rt6i_flags & RTF_EXPIRES) && dst->from) - dst_release(dst->from); + dst->from = NULL; + dst_release(from); if (rt6_has_peer(rt)) { struct inet_peer *peer = rt6_peer_ptr(rt); @@ -1010,7 +1011,6 @@ struct dst_entry *ip6_blackhole_route(struct net *net, struct dst_entry *dst_ori rt->rt6i_gateway = ort->rt6i_gateway; rt->rt6i_flags = ort->rt6i_flags; - rt6_clean_expires(rt); rt->rt6i_metric = 0; memcpy(&rt->rt6i_dst, &ort->rt6i_dst, sizeof(struct rt6key)); @@ -1784,8 +1784,6 @@ static struct rt6_info *ip6_rt_copy(struct rt6_info *ort, if ((ort->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) == (RTF_DEFAULT | RTF_ADDRCONF)) rt6_set_from(rt, ort); - else - rt6_clean_expires(rt); rt->rt6i_metric = 0; #ifdef CONFIG_IPV6_SUBTREES -- cgit v0.10.2