From d3c75e8dc81b6482ea230d03bbddddd38db9ab35 Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Mon, 12 Nov 2012 21:16:29 +0000 Subject: staging: et131x: Remove unnecessary DMA address alignment code "The cpu return address and the DMA bus master address are both guaranteed to be aligned to the smallest PAGE_SIZE order which is greater than or equal to the requested size." There are several places in the et131x.c code where these addresses are aligned to a 4k boundary after a call to dma_alloc_coherent(), needlessly. Remove these alignment offset calculations, and the et131x_align_allocated_memory() call which is only used for 4k alignments. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 4f68646..5f15a2e 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -290,7 +290,6 @@ struct fbr_lookup { dma_addr_t ring_physaddr; void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - dma_addr_t offset; u32 local_full; u32 num_entries; dma_addr_t buffsize; @@ -2227,32 +2226,6 @@ static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit) } /** - * et131x_align_allocated_memory - Align allocated memory on a given boundary - * @adapter: pointer to our adapter structure - * @phys_addr: pointer to Physical address - * @offset: pointer to the offset variable - * @mask: correct mask - */ -static void et131x_align_allocated_memory(struct et131x_adapter *adapter, - dma_addr_t *phys_addr, - dma_addr_t *offset, - u64 mask) -{ - u64 new_addr = *phys_addr & ~mask; - - *offset = 0; - - if (new_addr != *phys_addr) { - /* Move to next aligned block */ - new_addr += mask + 1; - /* Return offset for adjusting virt addr */ - *offset = new_addr - *phys_addr; - /* Return new physical address */ - *phys_addr = new_addr; - } -} - -/** * et131x_rx_dma_memory_alloc * @adapter: pointer to our private adapter structure * @@ -2268,7 +2241,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) u32 bufsize; u32 pktstat_ringsize; u32 fbr_chunksize; - u32 fbr_align; struct rx_ring *rx_ring; /* Setup some convenience pointers */ @@ -2331,29 +2303,13 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) "Cannot alloc memory for Free Buffer Ring %d\n", id); return -ENOMEM; } - - /* Align Free Buffer Ring on a 4K boundary */ - et131x_align_allocated_memory(adapter, - &rx_ring->fbr[id]->ring_physaddr, - &rx_ring->fbr[id]->offset, 0x0FFF); - - rx_ring->fbr[id]->ring_virtaddr = - (void *)((u8 *) rx_ring->fbr[id]->ring_virtaddr + - rx_ring->fbr[id]->offset); } for (id = 0; id < NUM_FBRS; id++) { - if (id == 0 && rx_ring->fbr[id]->buffsize > 4096) - fbr_align = 4096; - else - fbr_align = rx_ring->fbr[id]->buffsize; - - fbr_chunksize = (FBR_CHUNKS * - rx_ring->fbr[id]->buffsize) + fbr_align - 1; + fbr_chunksize = (FBR_CHUNKS * rx_ring->fbr[id]->buffsize); for (i = 0; i < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); i++) { dma_addr_t fbr_tmp_physaddr; - dma_addr_t fbr_offset; /* This code allocates an area of memory big enough for * N free buffers + (buffer_size - 1) so that the @@ -2376,11 +2332,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) /* See NOTE in "Save Physical Address" comment above */ fbr_tmp_physaddr = rx_ring->fbr[id]->mem_physaddrs[i]; - et131x_align_allocated_memory(adapter, - &fbr_tmp_physaddr, - &fbr_offset, - (fbr_align - 1)); - for (j = 0; j < FBR_CHUNKS; j++) { u32 index = (i * FBR_CHUNKS) + j; @@ -2389,7 +2340,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) */ rx_ring->fbr[id]->virt[index] = (u8 *) rx_ring->fbr[id]->mem_virtaddrs[i] + - (j * rx_ring->fbr[id]->buffsize) + fbr_offset; + (j * rx_ring->fbr[id]->buffsize); /* now store the physical address in the * descriptor so the device can access it @@ -2499,16 +2450,8 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); index++) { if (rx_ring->fbr[id]->mem_virtaddrs[index]) { - u32 fbr_align; - if (rx_ring->fbr[id]->buffsize > 4096) - fbr_align = 4096; - else - fbr_align = rx_ring->fbr[id]->buffsize; - - bufsize = - (rx_ring->fbr[id]->buffsize * FBR_CHUNKS) + - fbr_align - 1; + bufsize = (rx_ring->fbr[id]->buffsize * FBR_CHUNKS); dma_free_coherent(&adapter->pdev->dev, bufsize, @@ -2519,10 +2462,6 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) } } - /* Now the FIFO itself */ - rx_ring->fbr[id]->ring_virtaddr = (void *)((u8 *) - rx_ring->fbr[id]->ring_virtaddr - rx_ring->fbr[id]->offset); - bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries) + 0xfff; @@ -2967,7 +2906,7 @@ static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) /* Allocate enough memory for the Tx descriptor ring, and allocate * some extra so that the ring can be aligned on a 4k boundary. */ - desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX) + 4096 - 1; + desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); tx_ring->tx_desc_ring = (struct tx_desc *) dma_alloc_coherent(&adapter->pdev->dev, desc_size, @@ -3011,8 +2950,7 @@ static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) if (adapter->tx_ring.tx_desc_ring) { /* Free memory relating to Tx rings here */ - desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX) - + 4096 - 1; + desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); dma_free_coherent(&adapter->pdev->dev, desc_size, adapter->tx_ring.tx_desc_ring, -- cgit v0.10.2